From: Russell Senior Date: Sat, 5 Jun 2021 00:27:48 +0000 (-0700) Subject: ath79: add support for Ubiquiti PowerBeam M (XW) X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=12eb5b2384a6;p=openwrt%2Fstaging%2Fneocturne.git ath79: add support for Ubiquiti PowerBeam M (XW) This patch adds support for the Ubiquiti PowerBeam M (XW), e.g. PBE-M5-400, a 802.11n wireless with a feed+dish form factor. This device was previously supported by the ar71xx loco-m-xw firmware. Specifications: - Atheros AR9342 SoC - 64 MB RAM - 8 MB SPI flash - 1x 10/100 Mbps Ethernet port, 24 Vdc PoE-in - Power and LAN green LEDs - 4x RSSI LEDs (red, orange, green, green) - UART (115200 8N1) Flashing via stock GUI: - Downgrade to AirOS v5.5.x (latest available is 5.5.10-u2) first (see https://openwrt.org/toh/ubiquiti/powerbeam installation instructions) - Upload the factory image via AirOS web GUI. Flashing via TFTP: - Use a pointy tool (e.g., unbent paperclip) to keep the reset button pressed. - Power on the device (keep reset button pressed). - Keep pressing until LEDs flash alternatively LED1+LED3 => LED2+LED4 => LED1+LED3, etc. - Release reset button. - The device starts a TFTP server at 192.168.1.20. - Set a static IP on the computer (e.g., 192.168.1.21/24). - Upload via tftp the factory image: $ tftp 192.168.1.20 tftp> bin tftp> trace tftp> put openwrt-ath79-generic-xxxxx-ubnt_powerbeam-m-xw-squashfs-factory.bin WARNING: so far, no non-destructive method has been discovered for opening the enclosure to reach the serial console. Internal photos are available here: https://fcc.io/SWX-NBM5HP Signed-off-by: Russell Senior --- diff --git a/target/linux/ath79/dts/ar9342_ubnt_powerbeam-m-xw.dts b/target/linux/ath79/dts/ar9342_ubnt_powerbeam-m-xw.dts new file mode 100644 index 0000000000..6db058f887 --- /dev/null +++ b/target/linux/ath79/dts/ar9342_ubnt_powerbeam-m-xw.dts @@ -0,0 +1,34 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT + +#include "ar9342_ubnt_xw.dtsi" + +/ { + compatible = "ubnt,powerbeam-m-xw", "ubnt,xw", "qca,ar9342"; + model = "Ubiquiti PowerBeam M (XW)"; +}; + +&mdio0 { + status = "okay"; + + phy-mask = <4>; + + phy4: ethernet-phy@4 { + reg = <4>; + }; +}; + +ð0 { + status = "okay"; + + /* default for ar934x, except for 1000M and 10M */ + pll-data = <0x02000000 0x00000101 0x00001313>; + + phy-mode = "rgmii-id"; + phy-handle = <&phy4>; + + gmac-config { + device = <&gmac>; + rxd-delay = <3>; + rxdv-delay = <3>; + }; +}; diff --git a/target/linux/ath79/generic/base-files/etc/board.d/01_leds b/target/linux/ath79/generic/base-files/etc/board.d/01_leds index c844c70e46..8044d0c1f2 100644 --- a/target/linux/ath79/generic/base-files/etc/board.d/01_leds +++ b/target/linux/ath79/generic/base-files/etc/board.d/01_leds @@ -397,6 +397,7 @@ ubnt,nanostation-loco-m-xw|\ ubnt,nanostation-m|\ ubnt,nanostation-m-xw|\ ubnt,picostation-m|\ +ubnt,powerbeam-m-xw|\ ubnt,powerbridge-m|\ ubnt,rocket-m) ucidef_set_rssimon "wlan0" "200000" "1" diff --git a/target/linux/ath79/generic/base-files/etc/board.d/02_network b/target/linux/ath79/generic/base-files/etc/board.d/02_network index 2fa51ab905..b7e9d9584f 100644 --- a/target/linux/ath79/generic/base-files/etc/board.d/02_network +++ b/target/linux/ath79/generic/base-files/etc/board.d/02_network @@ -85,6 +85,7 @@ ath79_setup_interfaces() ubnt,picostation-m|\ ubnt,powerbeam-5ac-500|\ ubnt,powerbeam-5ac-gen2|\ + ubnt,powerbeam-m-xw|\ ubnt,powerbridge-m|\ ubnt,rocket-5ac-lite|\ ubnt,rocket-m|\ diff --git a/target/linux/ath79/image/generic-ubnt.mk b/target/linux/ath79/image/generic-ubnt.mk index f8e1d1e432..e8ea06a07a 100644 --- a/target/linux/ath79/image/generic-ubnt.mk +++ b/target/linux/ath79/image/generic-ubnt.mk @@ -328,6 +328,14 @@ define Device/ubnt_powerbeam-5ac-gen2 endef TARGET_DEVICES += ubnt_powerbeam-5ac-gen2 +define Device/ubnt_powerbeam-m-xw + $(Device/ubnt-xw) + DEVICE_MODEL := PowerBeam M + DEVICE_PACKAGES += rssileds + SUPPORTED_DEVICES += loco-m-xw +endef +TARGET_DEVICES += ubnt_powerbeam-m-xw + define Device/ubnt_powerbridge-m $(Device/ubnt-xm) SOC := ar7241