From: John Crispin Date: Thu, 14 Apr 2016 18:20:15 +0000 (+0200) Subject: docs: more cleanups X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=12e54a6dc049f59fb85e6968970421dca772fb38;p=web.git docs: more cleanups Signed-off-by: John Crispin --- diff --git a/docs/uci_qos.txt b/docs/uci_qos.txt index bd0d721..047dcd0 100644 --- a/docs/uci_qos.txt +++ b/docs/uci_qos.txt @@ -9,6 +9,7 @@ This is the documentation for the UCI configuration file '/etc/config/qos'. == Sections A minimal QoS configuration usually consists of: + * one _interface_ section * some _rules_ allocating packets to at least two buckets * _configuration_ of the buckets. @@ -26,17 +27,22 @@ config interface dsl option download 4096 ---- +[cols="4*1,4",options="header"] +|==== | Name | Type | Required | Default | Description | 'enabled' | boolean | yes | '1' | Enable/Disable QoS | 'classgroup' | string | yes | 'Default' | Specify 'classgroup' used for this interface (see description of 'classgroup' below) | 'overhead' | boolean | yes | '1' | decrease upload and download ratio to prevent link saturation | 'download' | integer | yes | '4096' | Download limit in 'kilobits/second' | 'upload' | integer | yes | '512' | Upload limit in 'kilobits/second' +|==== === Rules Each 'classify' section defines one group of packets and which target (i.e. bucket) this group belongs to. All the packets share the bucket specified. +[cols="4*1,4",options="header"] +|==== | Name | Type | Required | Default | Description | 'target' | bucket | yes | _(none)_ | The four defaults are: 'Priority, Express, Normal' and 'Bulk' | 'proto' | string | no | '0' | Packets matching this protocol belong to the bucket defined in target @@ -53,6 +59,7 @@ Each 'classify' section defines one group of packets and which target (i.e. buck | 'tos' | string | no | _(none)_ | Packets matching this, belong to the bucket defined in target | 'dscp' | string | no | _(none)_ | Packets matching this, belong to the bucket defined in target | 'direction' | string | no | _(none)_ | Packets matching this traffic direction ('in' or 'out') belong to the bucket defined in target +|==== === Classgroup @@ -64,9 +71,12 @@ config classgroup "Default" option default "Normal" ---- +[cols="4*1,4",options="header"] +|==== | Name | Type | Required | Default | Description | 'classes' | bucket names | yes | _(none)_ | Specifies the list of names of _classes_ | 'default' | bucket name | yes | _(none)_ | Defines which _class_ is considered default +|==== === Classes @@ -82,6 +92,8 @@ config class "Normal" option priority 5 ---- +[cols="4*1,4",options="header"] +|==== | Name | Type | Required | Default | Description | 'packetsize' | integer | yes | _(none)_ | in bytes | 'packetdelay' | integer | yes | _(none)_ | in ms @@ -90,6 +102,7 @@ config class "Normal" | 'limitrate' | integer | no | 100 | Defines to how much percent of the available bandwidth this class is capped to, value in % | 'maxsize' | integer | yes | _(none)_ | in bytes | 'priority' | integer | yes | _(none)_ | in % +|==== === Classes (For Advanced Users) @@ -119,13 +132,13 @@ Below is unverified technical breakdown of each /etc/config/qos class parameters == Quick start guide -* Install the qos-scripts package: +Install the qos-scripts package: ---- opkg install qos-scripts ---- -* Basic configuration using UCI command line: +Basic configuration using UCI command line: ---- uci set qos.wan.upload=1000 # Upload speed in kBits/s @@ -134,7 +147,7 @@ uci set qos.wan.enabled=1 uci commit qos ---- -* Start it and look for error output and test): +Start it and look for error output and test): ---- /etc/init.d/qos start @@ -148,7 +161,7 @@ uci commit qos == Troubleshooting -* Look at the generated traffic control qdisc settings by running: +Look at the generated traffic control qdisc settings by running: ---- tc qdisc @@ -160,11 +173,11 @@ The default (ie no-QoS-applied) values for any interface look like this: qdisc fq_codel 0: dev eth0 root refcnt 2 limit 1024p flows 1024 quantum 300 target 5.0ms interval 100.0ms ecn ---- -... Any interface with only a single qdisc line printed, showing the same settings as this line (this one is for _dev eth0_), indicates no QoS on that interface. +Any interface with only a single qdisc line printed, showing the same settings as this line (this one is for _dev eth0_), indicates no QoS on that interface. Network interfaces with QoS enabled will have multiple qdisc lines printed, each corresponding to a QoS class, etc. -* If the printed qdisc settings don't seem to be correct, you can preview the _tc_ commands generated from the OpenWRT _/etc/config/qos_ by running: +If the printed qdisc settings don't seem to be correct, you can preview the _tc_ commands generated from the OpenWRT _/etc/config/qos_ by running: ---- /usr/lib/qos/generate.sh interface wan diff --git a/docs/uci_samba.txt b/docs/uci_samba.txt index efde1e1..9dbfe1e 100644 --- a/docs/uci_samba.txt +++ b/docs/uci_samba.txt @@ -21,7 +21,7 @@ config 'samba' option 'interface' 'loopback lan' ---- -[options="header"] +[cols="4*1,4",options="header"] |==== | Name | Type | Required | Default | Option | Description | 'name' | string | no | hostname or OpenWrt | | Name of the Server @@ -47,7 +47,7 @@ config 'sambashare' option 'read_only' 'yes' ---- -[options="header"] +[cols="4*1,4",options="header"] |==== | Name | Type | Required | Default | Option | Description | 'name' | string | yes | _(none)_ | | Name of the entry. Will be shown in the filebrowser.