From: Imre Kaloz Date: Thu, 5 Jun 2008 17:14:02 +0000 (+0000) Subject: rename and renumber storm patches X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=12d5244f2b95681f494b90e26e21d90e4bd88929;p=openwrt%2Fstaging%2Fansuel.git rename and renumber storm patches SVN-Revision: 11368 --- diff --git a/target/linux/storm/patches/001-arch.patch b/target/linux/storm/patches/001-arch.patch new file mode 100644 index 0000000000..b0461d44e3 --- /dev/null +++ b/target/linux/storm/patches/001-arch.patch @@ -0,0 +1,8864 @@ +--- a/arch/arm/Kconfig ++++ b/arch/arm/Kconfig +@@ -220,6 +220,9 @@ + help + This enables support for the Cirrus EP93xx series of CPUs. + ++config ARCH_SL2312 ++ bool "SL2312" ++ + config ARCH_FOOTBRIDGE + bool "FootBridge" + select FOOTBRIDGE +@@ -414,6 +417,8 @@ + + source "arch/arm/mach-footbridge/Kconfig" + ++source "arch/arm/mach-sl2312/Kconfig" ++ + source "arch/arm/mach-integrator/Kconfig" + + source "arch/arm/mach-iop32x/Kconfig" +@@ -549,6 +554,16 @@ + config PCI_SYSCALL + def_bool PCI + ++config SL2312_LPC ++ bool "LPC Host Support" ++ depends on ARCH_SL2312 ++ help ++ ++config SL2312_LPC_IT8712 ++ bool "IT8712 Support" ++ depends on ARCH_SL2312 && SL2312_LPC ++ help ++ + # Select the host bridge type + config PCI_HOST_VIA82C505 + bool +@@ -988,6 +1003,10 @@ + source "drivers/mtd/Kconfig" + endif + ++if ARCH_SL2312 ++source "drivers/telephony/Kconfig" ++endif ++ + source "drivers/parport/Kconfig" + + source "drivers/pnp/Kconfig" +@@ -997,7 +1016,7 @@ + if PCMCIA || ARCH_CLPS7500 || ARCH_IOP32X || ARCH_IOP33X || ARCH_IXP4XX \ + || ARCH_L7200 || ARCH_LH7A40X || ARCH_PXA || ARCH_RPC \ + || ARCH_S3C2410 || ARCH_SA1100 || ARCH_SHARK || FOOTBRIDGE \ +- || ARCH_IXP23XX ++ || ARCH_IXP23XX || ARCH_SL2312 + source "drivers/ide/Kconfig" + endif + +--- a/arch/arm/Makefile ++++ b/arch/arm/Makefile +@@ -72,6 +72,7 @@ + tune-$(CONFIG_CPU_ARM922T) :=-mtune=arm9tdmi + tune-$(CONFIG_CPU_ARM925T) :=-mtune=arm9tdmi + tune-$(CONFIG_CPU_ARM926T) :=-mtune=arm9tdmi ++tune-$(CONFIG_CPU_FA52X) :=-mtune=arm9tdmi + tune-$(CONFIG_CPU_SA110) :=-mtune=strongarm110 + tune-$(CONFIG_CPU_SA1100) :=-mtune=strongarm1100 + tune-$(CONFIG_CPU_XSCALE) :=$(call cc-option,-mtune=xscale,-mtune=strongarm110) -Wa,-mcpu=xscale +@@ -111,6 +112,7 @@ + machine-$(CONFIG_ARCH_PXA) := pxa + machine-$(CONFIG_ARCH_L7200) := l7200 + machine-$(CONFIG_ARCH_INTEGRATOR) := integrator ++ machine-$(CONFIG_ARCH_SL2312) := sl2312 + textofs-$(CONFIG_ARCH_CLPS711X) := 0x00028000 + machine-$(CONFIG_ARCH_CLPS711X) := clps711x + machine-$(CONFIG_ARCH_IOP32X) := iop32x +--- a/arch/arm/boot/compressed/Makefile ++++ b/arch/arm/boot/compressed/Makefile +@@ -19,6 +19,10 @@ + OBJS += head-shark.o ofw-shark.o + endif + ++ifeq ($(CONFIG_ARCH_SL2312),y) ++OBJS += head-sl2312.o ++endif ++ + ifeq ($(CONFIG_ARCH_L7200),y) + OBJS += head-l7200.o + endif +--- /dev/null ++++ b/arch/arm/boot/compressed/head-sl2312.S +@@ -0,0 +1,6 @@ ++#include ++#include ++ ++ .section ".start", "ax" ++ mov r7, #MACH_TYPE_SL2312 ++ +--- a/arch/arm/boot/compressed/head.S ++++ b/arch/arm/boot/compressed/head.S +@@ -57,6 +57,17 @@ + mov \rb, #0x50000000 + add \rb, \rb, #0x4000 * CONFIG_S3C_LOWLEVEL_UART_PORT + .endm ++/***************************************************** ++ * for Storlink SoC ++ *****************************************************/ ++#elif defined(CONFIG_ARCH_SL2312) ++ .macro loadsp, rb ++ mov \rb, #0x16000000 ++ .endm ++ .macro writeb, rb ++ strb \rb, [r3, #0] ++ .endm ++/****************************************************/ + #else + .macro loadsp, rb + addruart \rb +@@ -116,7 +127,28 @@ + .rept 8 + mov r0, r0 + .endr +- ++/***************************************************************************** ++ * for Storlink Soc -- on chip UART ++ *****************************************************************************/ ++#ifndef CONFIG_SERIAL_IT8712 // Jason test ++@ mov r3, #0x22000000 ++ mov r3, #0x42000000 ++ mov r11, #0x80 ++ strb r11, [r3, #0xc] ++ mov r11, #0x0 ++ strb r11, [r3, #0x4] ++#ifndef CONFIG_SL3516_ASIC ++ mov r11, #0x9C /*0x9c->19200 0x4E->38400 0x34->57600 */ ++#else ++ mov r11, #0x9C /* 0x61 for 30MHz on GeminiA chip*/ ++#endif ++ strb r11, [r3, #0x0] ++ mov r11, #0x03 ++ strb r11, [r3, #0xc] ++ mov r11, #0xFB ++ strb r11, [r3, #0x18] ++#endif ++/*****************************************************************************/ + b 1f + .word 0x016f2818 @ Magic numbers to help the loader + .word start @ absolute load/run zImage address +@@ -458,6 +490,39 @@ + mcr p15, 0, r0, c7, c5, 4 @ ISB + mov pc, r12 + ++/***************************************************************************** ++ * for Storlink Soc -- CPU cache ++ *****************************************************************************/ ++__fa526_cache_on: ++ mov r12, lr ++ bl __setup_mmu ++ mov r0, #0 ++ mcr p15, 0, r0, c7, c6, 0 @ Invalidate D cache ++ mcr p15, 0, r0, c7, c5, 0 @ Invalidate I cache ++ mcr p15, 0, r0, c7, c10, 4 @ drain write buffer ++ mcr p15, 0, r0, c8, c7, 0 @ flush I,D TLBs ++ mcr p15, 0, r3, c2, c0, 0 @ load page table pointer ++ mov r0, #-1 ++ mcr p15, 0, r0, c3, c0, 0 @ load domain access register ++ mrc p15, 0, r0, c1, c0, 0 ++ mov r0, r0 ++ mov r0, r0 ++#ifndef CONFIG_CPU_DCACHE_DISABLE ++ orr r0, r0, #0x0004 @ .... .... .... .1.. ++#endif ++#ifndef CONFIG_CPU_ICACHE_DISABLE ++ orr r0, r0, #0x1000 @ ...1 .... .... .... ++#endif ++ ++#ifndef DEBUG ++ orr r0, r0, #0x0039 @ Write buffer, mmu ++#endif ++ mcr p15, 0, r0, c1, c0 ++ mov r0, r0 ++ mov r0, r0 ++ mov pc, r12 ++/********************************************************************************/ ++ + __arm6_mmu_cache_on: + mov r12, lr + bl __setup_mmu +@@ -625,6 +690,16 @@ + + @ These match on the architecture ID + ++/***************************************************************************** ++ * for Storlink Soc -- CPU architecture ID ++ *****************************************************************************/ ++ .word 0x66015261 @ FA526 ++ .word 0xff01fff1 ++ b __fa526_cache_on ++ b __fa526_cache_off ++ b __fa526_cache_flush ++/*****************************************************************************/ ++ + .word 0x00020000 @ ARMv4T + .word 0x000f0000 + b __armv4_mmu_cache_on +@@ -712,6 +787,23 @@ + mcr p15, 0, r0, c8, c7, 0 @ invalidate whole TLB + mov pc, r12 + ++/***************************************************************************** ++ * for Storlink Soc -- CPU cache ++ *****************************************************************************/ ++__fa526_cache_off: ++ mrc p15, 0, r0, c1, c0 ++ bic r0, r0, #0x000d ++ mov r1, #0 ++ mcr p15, 0, r1, c7, c14, 0 @ clean and invalidate D cache ++ mcr p15, 0, r1, c7, c10, 4 @ drain WB ++ mcr p15, 0, r0, c1, c0 @ turn MMU and cache off ++ mov r0, #0 ++ mcr p15, 0, r0, c7, c5, 0 @ invalidate whole cache v4 ++ mcr p15, 0, r0, c8, c7, 0 @ invalidate whole TLB v4 ++ mov pc, lr ++/*****************************************************************************/ ++ ++ + __arm6_mmu_cache_off: + mov r0, #0x00000030 @ ARM6 control reg. + b __armv3_mmu_cache_off +@@ -759,6 +851,17 @@ + mcr p15, 0, ip, c7, c10, 4 @ drain WB + mov pc, lr + ++/***************************************************************************** ++ * for Storlink Soc -- CPU cache ++ *****************************************************************************/ ++__fa526_cache_flush: ++ mov r1, #0 ++ mcr p15, 0, r1, c7, c14, 0 @ clean and invalidate D cache ++ mcr p15, 0, r1, c7, c5, 0 @ flush I cache ++ mcr p15, 0, r1, c7, c10, 4 @ drain WB ++ mov pc, lr ++/*****************************************************************************/ ++ + + __armv6_mmu_cache_flush: + mov r1, #0 +--- /dev/null ++++ b/arch/arm/boot/compressed/it8712.h +@@ -0,0 +1,25 @@ ++ ++#ifndef __IT8712_H__ ++#define __IT8712_H__ ++ ++#include "asm/arch/sl2312.h" ++ ++#define IT8712_IO_BASE SL2312_LPC_IO_BASE ++//#define IT8712_IO_BASE 0x27000000 ++// Device LDN ++#define LDN_SERIAL1 0x01 ++#define LDN_SERIAL2 0x02 ++#define LDN_PARALLEL 0x03 ++#define LDN_KEYBOARD 0x05 ++#define LDN_MOUSE 0x06 ++#define LDN_GPIO 0x07 ++ ++#define IT8712_UART1_PORT 0x3F8 ++#define IT8712_UART2_PORT 0x2F8 ++ ++#define IT8712_GPIO_BASE 0x800 // 0x800-0x804 for GPIO set1-set5 ++ ++void LPCSetConfig(char LdnNumber, char Index, char data); ++char LPCGetConfig(char LdnNumber, char Index); ++ ++#endif +--- a/arch/arm/boot/compressed/misc.c ++++ b/arch/arm/boot/compressed/misc.c +@@ -30,7 +30,7 @@ + #include + + #ifdef CONFIG_DEBUG_ICEDCC +- ++#include "it8712.h" + #ifdef CONFIG_CPU_V6 + + static void icedcc_putc(int ch) +@@ -69,6 +69,7 @@ + #define flush() do { } while (0) + #endif + ++#if 0 + static void putstr(const char *ptr) + { + char c; +@@ -81,11 +82,36 @@ + + flush(); + } ++#endif + + #endif + + #define __ptr_t void * + ++#ifdef CONFIG_SERIAL_IT8712 ++unsigned int it8712_uart_base; ++#define UART_RX 0 ++#define UART_TX 0 ++#define UART_DLL 0 ++#define UART_TRG 0 ++#define UART_DLM 1 ++#define UART_IER 1 ++#define UART_FCTR 1 ++#define UART_IIR 2 ++#define UART_FCR 2 ++#define UART_EFR 2 ++#define UART_LCR 3 ++#define UART_MCR 4 ++#define UART_LSR 5 ++#define UART_MSR 6 ++#define UART_SCR 7 ++#define UART_EMSR 7 ++void LPCEnterMBPnP(void); ++void LPCExitMBPnP(void); ++int SearchIT8712(void); ++int InitLPCInterface(void); ++#endif ++ + /* + * Optimised C version of memzero for the ARM. + */ +@@ -346,6 +372,9 @@ + decompress_kernel(ulg output_start, ulg free_mem_ptr_p, ulg free_mem_ptr_end_p, + int arch_id) + { ++#ifdef CONFIG_SERIAL_IT8712 ++ unsigned char *addr; ++#endif + output_data = (uch *)output_start; /* Points to kernel start */ + free_mem_ptr = free_mem_ptr_p; + free_mem_ptr_end = free_mem_ptr_end_p; +@@ -353,6 +382,33 @@ + + arch_decomp_setup(); + ++#ifdef CONFIG_SERIAL_IT8712 ++ ++ InitLPCInterface(); ++ LPCSetConfig(0, 0x02, 0x01); ++ LPCSetConfig(LDN_SERIAL1, 0x30, 0x1); ++ LPCSetConfig(LDN_SERIAL1, 0x23, 0x0); ++ it8712_uart_base = IT8712_IO_BASE; ++ it8712_uart_base += ((LPCGetConfig(LDN_SERIAL1, 0x60) << 8) + LPCGetConfig(LDN_SERIAL1, 0x61)); ++ ++ do { ++ addr = (unsigned char *)(it8712_uart_base + UART_LCR) ; ++ *addr = 0x80; ++ // Set Baud Rate ++ addr = (unsigned char *)(it8712_uart_base+UART_DLL); ++ *addr = 0x06 ; ++ addr = (unsigned char *)(it8712_uart_base+UART_DLM); ++ *addr = 0x00 ; ++ ++ addr = (unsigned char *)(it8712_uart_base+UART_LCR); // LCR ++ *addr = 0x07 ; ++ addr = (unsigned char *)(it8712_uart_base+UART_MCR); // MCR ++ *addr = 0x08 ; ++ addr = (unsigned char *)(it8712_uart_base+UART_FCR); // FCR ++ *addr = 0x01 ; ++ } while(0); ++#endif ++ + makecrc(); + putstr("Uncompressing Linux..."); + gunzip(); +@@ -374,4 +430,119 @@ + return 0; + } + #endif ++ ++#ifdef CONFIG_SERIAL_IT8712 ++ ++#define LPC_KEY_ADDR (unsigned char *)(SL2312_LPC_IO_BASE + 0x2e) ++#define LPC_DATA_ADDR (unsigned char *)(SL2312_LPC_IO_BASE + 0x2f) ++#define LPC_BUS_CTRL *( unsigned char*) (SL2312_LPC_HOST_BASE + 0) ++#define LPC_BUS_STATUS *( unsigned char*) (SL2312_LPC_HOST_BASE + 2) ++#define LPC_SERIAL_IRQ_CTRL *( unsigned char*) (SL2312_LPC_HOST_BASE + 4) ++ ++char LPCGetConfig(char LdnNumber, char Index) ++{ ++ char rtn; ++ unsigned char *addr ; ++ ++ LPCEnterMBPnP(); // Enter IT8712 MB PnP mode ++ ++ addr = LPC_KEY_ADDR; ++ *addr = 0x07 ; ++ ++ addr = LPC_DATA_ADDR; ++ *addr = LdnNumber ; ++ ++ addr = LPC_KEY_ADDR; ++ *addr = Index ; ++ ++ addr = LPC_DATA_ADDR ; ++ rtn = *addr ; ++ ++ LPCExitMBPnP(); ++ return rtn; ++ ++} ++ ++void LPCSetConfig(char LdnNumber, char Index, char data) ++{ ++ unsigned char *addr; ++ LPCEnterMBPnP(); // Enter IT8712 MB PnP mode ++ addr = LPC_KEY_ADDR; ++ *addr = 0x07; ++ addr = LPC_DATA_ADDR; ++ *addr = LdnNumber; ++ addr = LPC_KEY_ADDR; ++ *addr = Index; ++ addr = LPC_DATA_ADDR; ++ *addr = data; ++ ++ LPCExitMBPnP(); ++} ++ ++//unsigned char key[4] ; ++void LPCEnterMBPnP(void) ++{ ++ unsigned char *addr; ++ addr = LPC_KEY_ADDR; ++ unsigned char key[4] = {0x87, 0x01, 0x55, 0x55}; ++ ++ do { ++ *addr = key[0]; ++ *addr = key[1]; ++ *addr = key[2]; ++ *addr = key[3]; ++ }while(0); ++} ++ ++void LPCExitMBPnP(void) ++{ ++ unsigned char *addr; ++ addr = LPC_KEY_ADDR; ++ *addr = 0x02 ; ++ ++ addr = LPC_DATA_ADDR; ++ *addr = 0x02 ; ++} ++ ++int InitLPCInterface(void) ++{ ++ int i; ++ LPC_BUS_CTRL = 0xc0; ++ LPC_SERIAL_IRQ_CTRL = 0xc0; ++ ++ for(i=0;i<0x2000;i++) ; ++ ++ LPC_SERIAL_IRQ_CTRL = 0x80; ++ if (!SearchIT8712()) ; ++// while(1); ++ return 0; ++} ++ ++int SearchIT8712(void) ++{ ++ unsigned char Id1, Id2; ++ unsigned short Id; ++ unsigned char *addr; ++ ++ LPCEnterMBPnP(); ++ addr = LPC_KEY_ADDR; ++ *addr = 0x20 ; ++ addr = LPC_DATA_ADDR; ++ Id1 = *addr ; ++ ++ addr = LPC_KEY_ADDR; ++ *addr = 0x21 ; ++ addr = LPC_DATA_ADDR; ++ Id2 = *addr ; ++ ++ Id = (Id1 << 8) | Id2; ++ LPCExitMBPnP(); ++ ++ if (Id == 0x8712) ++ return 1; ++ else ++ return 0; ++} ++ ++#endif + +--- a/arch/arm/kernel/entry-armv.S ++++ b/arch/arm/kernel/entry-armv.S +@@ -18,6 +18,8 @@ + #include + #include + #include ++#include ++#include + #include + #include + +--- a/arch/arm/kernel/irq.c ++++ b/arch/arm/kernel/irq.c +@@ -40,6 +40,8 @@ + #include + #include + ++extern int fixup_irq(unsigned int irq); ++ + /* + * No architecture-specific irq_finish function defined in arm/arch/irqs.h. + */ +@@ -111,8 +113,11 @@ + asmlinkage void __exception asm_do_IRQ(unsigned int irq, struct pt_regs *regs) + { + struct pt_regs *old_regs = set_irq_regs(regs); +- struct irq_desc *desc = irq_desc + irq; ++// struct irq_desc *desc = irq_desc + irq; ++ struct irq_desc *desc; + ++ irq = fixup_irq(irq); ++ desc = irq_desc + irq; + /* + * Some hardware gives randomly wrong interrupts. Rather + * than crashing, do something sensible. +--- a/arch/arm/kernel/process.c ++++ b/arch/arm/kernel/process.c +@@ -117,7 +117,7 @@ + void (*pm_idle)(void); + EXPORT_SYMBOL(pm_idle); + +-void (*pm_power_off)(void); ++//void (*pm_power_off)(void); + EXPORT_SYMBOL(pm_power_off); + + void (*arm_pm_restart)(char str) = arm_machine_restart; +@@ -188,13 +188,37 @@ + + void machine_halt(void) + { ++ unsigned int reg_v; ++ ++ printk("arch_power_off\n"); ++ ++ reg_v = readl(IO_ADDRESS(SL2312_POWER_CTRL_BASE) + 0x04); ++ reg_v &= ~0x00000002; ++ reg_v |= 0x1; ++ mdelay(5); ++ // Power off ++ __raw_writel( reg_v, IO_ADDRESS(SL2312_POWER_CTRL_BASE) + 0x04); ++ + } + + + void machine_power_off(void) + { +- if (pm_power_off) ++ unsigned int reg_v; ++ ++// if (pm_power_off) ++ if (&pm_power_off!=NULL) + pm_power_off(); ++ ++ printk("arch_power_off\n"); ++ ++ reg_v = readl(IO_ADDRESS(SL2312_POWER_CTRL_BASE) + 0x04); ++ reg_v &= ~0x00000002; ++ reg_v |= 0x1; ++ mdelay(5); ++ // Power off ++ __raw_writel( reg_v, IO_ADDRESS(SL2312_POWER_CTRL_BASE) + 0x04); ++ + } + + void machine_restart(char * __unused) +--- a/arch/arm/kernel/time.c ++++ b/arch/arm/kernel/time.c +@@ -502,8 +502,13 @@ + + device_initcall(timer_init_sysfs); + ++extern unsigned int rtc_get_time_second(void); ++ + void __init time_init(void) + { ++#ifdef CONFIG_SL2312_RTC ++ xtime.tv_sec = rtc_get_time_second() ; ++#endif + #ifndef CONFIG_GENERIC_TIME + if (system_timer->offset == NULL) + system_timer->offset = dummy_gettimeoffset; +--- /dev/null ++++ b/arch/arm/mach-sl2312/Kconfig +@@ -0,0 +1,33 @@ ++ ++menu "SL2312" ++ ++config SL3516_ASIC ++ bool "SL3516 ASIC version" ++ depends on ARCH_SL2312 ++ help ++ This option to select AISC or FPGA ++config PCI ++ bool "SL2312 PCI" ++ depends on ARCH_SL2312 ++ help ++ This option to enable Storlink PCI controller ++ ++config SL2312_LPC ++ bool "SL2312 LPC" ++ depends on ARCH_SL2312 ++ help ++ This option to enable Low Pin Count controller ++ ++config SL2312_USB ++ bool "SL2312 USB" ++ depends on ARCH_SL2312 ++ help ++ This option to enable USB OTG host controller ++ ++config GEMINI_IPI ++ bool "Gemini IPI test" ++ depends on ARCH_SL2312 ++ help ++ Enable this option to test dual cpu Inter-Processor-Interrupt ++endmenu ++ +--- /dev/null ++++ b/arch/arm/mach-sl2312/Makefile +@@ -0,0 +1,16 @@ ++# ++# Makefile for the linux kernel. ++# ++ ++# Object file lists. ++ ++obj-y := arch.o irq.o mm.o time.o sl3516_device.o ++obj-m := ++obj-n := ++ ++ ++obj-$(CONFIG_PCI) += pci.o ++obj-$(CONFIG_SL2312_LPC) += lpc.o ++obj-$(CONFIG_SL2312_USB) += sl2312-otg.o # sl2312-otg-1.o ++obj-$(CONFIG_GEMINI_XOR_ACCE) += xor.o ++obj-$(CONFIG_GEMINI_IPI) += gemini_ipi.o +--- /dev/null ++++ b/arch/arm/mach-sl2312/Makefile.boot +@@ -0,0 +1,5 @@ ++ zreladdr-y := 0x00008000 ++params_phys-y := 0x00508100 ++#params_phys-y := 0x00008100 ++initrd_phys-y := 0x00800000 ++ +--- /dev/null ++++ b/arch/arm/mach-sl2312/arch.c +@@ -0,0 +1,72 @@ ++/* ++ * linux/arch/arm/mach-epxa10db/arch.c ++ * ++ * Copyright (C) 2000 Deep Blue Solutions Ltd ++ * Copyright (C) 2001 Altera Corporation ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; either version 2 of the License, or ++ * (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA ++ */ ++#include ++#include ++ ++#include ++#include ++#include ++#include ++#include ++ ++extern void sl2312_map_io(void); ++extern void sl2312_init_irq(void); ++extern unsigned long sl2312_gettimeoffset (void); ++extern void __init sl2312_time_init(void); ++ ++static struct sys_timer sl2312_timer = { ++ .init = sl2312_time_init, ++ .offset = sl2312_gettimeoffset, ++}; ++ ++static void __init ++sl2312_fixup(struct machine_desc *desc, struct tag *tags, ++ char **cmdline, struct meminfo *mi) ++{ ++ mi->nr_banks = 1; ++ mi->bank[0].start = 0; ++#ifdef CONFIG_GEMINI_IPI ++ mi->bank[0].size = (64*1024*1024); // 128M ++#else ++ mi->bank[0].size = (128*1024*1024); // 128M ++#endif ++ mi->bank[0].node = 0; ++} ++ ++/* MACHINE_START(SL2312, "GeminiA") ++ MAINTAINER("Storlink Semi") ++ BOOT_MEM(0x00000000, 0x90000000, 0xf0000000) ++ FIXUP(sl2312_fixup) ++ MAPIO(sl2312_map_io) ++ INITIRQ(sl2312_init_irq) ++ .timer = &sl2312_timer, ++MACHINE_END */ ++ ++MACHINE_START(SL2312, "GeminiA") ++ /* .phys_ram = 0x00000000, */ ++ .phys_io = 0x7fffc000, ++ .io_pg_offst = ((0xffffc000) >> 18) & 0xfffc, ++ .boot_params = 0x100, ++ .fixup = sl2312_fixup, ++ .map_io = sl2312_map_io, ++ .init_irq = sl2312_init_irq, ++ .timer = &sl2312_timer, ++MACHINE_END +--- /dev/null ++++ b/arch/arm/mach-sl2312/gemini_ipi.c +@@ -0,0 +1,593 @@ ++/* ++ * FILE NAME sl_cir.c ++ * ++ * BRIEF MODULE DESCRIPTION ++ * IPI Driver for CPU1. ++ * ++ * Author: StorLink, Corp. ++ * Jason Lee ++ * ++ * Copyright 2002~2006 StorLink, Corp. ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License as published by the ++ * Free Software Foundation; either version 2 of the License, or (at your ++ * option) any later version. ++ * ++ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED ++ * WARRANTIES, INCLUDING, BUT NOT LIMit8712D TO, THE IMPLIED WARRANTIES OF ++ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN ++ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, ++ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT ++ * NOT LIMit8712D TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF ++ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ++ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT ++ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF ++ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. ++ * ++ * You should have received a copy of the GNU General Public License along ++ * with this program; if not, writ8712 to the Free Software Foundation, Inc., ++ * 675 Mass Ave, Cambridge, MA 02139, USA. ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++ ++#include ++ ++#include ++ ++#include ++#include ++#include ++#include ++#include ++ ++#include ++ ++ ++static int sl_ipi_debug = 1 ; ++#define DEB(x) if(sl_ipi_debug>=1) x ++ ++#define SRAM_PTR IO_ADDRESS(SL2312_SRAM_BASE) ++volatile JSCALE_REQ_T *req=(JSCALE_REQ_T*)SRAM_PTR; ++volatile JSCALE_RSP_T *rsp=(JSCALE_RSP_T*)(SRAM_PTR+0x20); ++ ++unsigned int jscale_status=0; ++ ++#define JSCALE_WAIT 0 ++#define XXXXXX_WAIT 1 ++#define MAX_WAIT_Q 8 ++wait_queue_head_t gemini_ipi_wait[MAX_WAIT_Q]; ++ ++#define DRAMCTL_DMA_CTL 0X20 ++#define DRAMCTL_DMA_SA 0X24 ++#define DRAMCTL_DMA_DA 0X28 ++#define DRAMCTL_DMA_CNT 0X2C ++#define MEMCPY_UNIT 0x40000 ++int hw_memcpy(const void *to, const void *from, unsigned int bytes) ++{ ++ unsigned int reg_a,reg_d; ++ int count = bytes,i=0; ++ ++ consistent_sync((unsigned int *)to, bytes, DMA_BIDIRECTIONAL); ++ consistent_sync((unsigned int *)from,bytes, DMA_TO_DEVICE); ++ ++ DEB(printk("hwmemcpy:count %d\n",count)); ++ while(count>0){ ++ // SA ++ reg_a = IO_ADDRESS(SL2312_DRAM_CTRL_BASE)+DRAMCTL_DMA_SA; ++ reg_d = (unsigned int )__virt_to_phys(from) + i*MEMCPY_UNIT; ++ DEB(printk("hwmemcpy:from 0x%08x\n",reg_d)); ++ writel(reg_d,reg_a); ++ // DA ++ reg_a = IO_ADDRESS(SL2312_DRAM_CTRL_BASE)+DRAMCTL_DMA_DA; ++ reg_d = (unsigned int )__virt_to_phys(to) + i*MEMCPY_UNIT; ++ writel(reg_d,reg_a); ++ DEB(printk("hwmemcpy:to 0x%08x\n",reg_d)); ++ // byte count ++ reg_a = IO_ADDRESS(SL2312_DRAM_CTRL_BASE)+DRAMCTL_DMA_CNT; ++ reg_d = (count>=MEMCPY_UNIT)?MEMCPY_UNIT:count; ++ writel(reg_d,reg_a); ++ // start DMA ++ reg_a = IO_ADDRESS(SL2312_DRAM_CTRL_BASE)+DRAMCTL_DMA_CTL; ++ writel(0x80000001,reg_a); ++ ++ do{ ++ cond_resched(); ++// msleep(4); ++ reg_d = readl(IO_ADDRESS(SL2312_DRAM_CTRL_BASE)+DRAMCTL_DMA_CTL); ++ }while(reg_d&0x1); ++ ++ count -= MEMCPY_UNIT; ++ i++; ++ } ++ ++ return bytes; ++} ++ ++static irqreturn_t ipi_interrupt() ++{ ++ unsigned int id=getcpuid(),tmp; ++ ++ //dmac_inv_range(__phys_to_virt(SL2312_SRAM_BASE),__phys_to_virt(SHAREADDR)+0x2000); ++ ++ ++ // Clear Interrupt ++ if(id==CPU0) { ++ tmp = readl(CPU1_STATUS); ++ tmp &= ~CPU_IPI_BIT_MASK; ++ writel(tmp,CPU1_STATUS); ++ } ++ else{ ++ tmp = readl(CPU0_STATUS); ++ tmp &= ~CPU_IPI_BIT_MASK; ++ writel(tmp,CPU0_STATUS); ++ } ++ ++ // ++ DEB(printk("ipi interrupt:0x%x\n",rsp->status)); ++ switch(rsp->status){ ++ case JSCALE_STATUS_OK: ++ ++ break; ++ case JSCALE_UNKNOWN_MSG_TYPE: ++ ++ break; ++ case JSCALE_FAILED_FILE_SIZE: ++ ++ break; ++ case JSCALE_FAILED_MALLOC: ++ ++ break; ++ case JSCALE_FAILED_FORMAT: ++ ++ break; ++ case JSCALE_DECODE_ERROR: ++ ++ break; ++ ++ } ++ jscale_status = rsp->status; ++// wake_up(&gemini_ipi_wait[JSCALE_WAIT]); ++ ++ return IRQ_HANDLED; ++} ++ ++static int gemini_ipi_open(struct inode *inode, struct file *file) ++{ ++ DEB(printk("ipi open\n")); ++ return 0; ++} ++ ++ ++static int gemini_ipi_release(struct inode *inode, struct file *file) ++{ ++ DEB(printk("ipi release\n")); ++ return 0; ++} ++ ++ ++static int gemini_ipi_ioctl(struct inode *inode, struct file *file, ++ unsigned int cmd, unsigned long arg) ++{ ++ JSCALE_RSP_T tmp; ++ ++ switch(cmd) { ++ case GEMINI_IPI_JSCALE_REQ: ++ DEB(printk("ipi:ioctl jscale request %dX%d Q:%d\n",req->ScaledImageWidth,req->ScaledImageHeight,req->ScaledImageQuality)); ++ if (copy_from_user(req, (JSCALE_REQ_T *)arg, sizeof(JSCALE_REQ_T))) ++ return -EFAULT; ++ req->hdr.type = IPC_JSCALE_REQ_MSG; ++ req->hdr.length = sizeof(JSCALE_REQ_T); ++ req->input_location = CPU_1_DATA_OFFSET; ++ req->output_location = CPU_1_DATA_OFFSET; ++ break; ++ case GEMINI_IPI_JSCALE_STAT: ++ DEB(printk("ipi:ioctl jscale stat \n")); ++ if(jscale_status==JSCALE_BUSY){ // not yet ++ tmp.status = JSCALE_BUSY; ++ if (copy_to_user((JSCALE_RSP_T *)arg,&tmp, sizeof(JSCALE_RSP_T))) ++ return -EFAULT; ++ } ++ else{ // finish or error ++ if (copy_to_user((JSCALE_RSP_T *)arg,rsp, sizeof(JSCALE_RSP_T))) ++ return -EFAULT; ++ } ++ break; ++ default: ++ printk("IPI: Error IOCTL number\n"); ++ return -ENOIOCTLCMD; ++ } ++ ++ return 0; ++} ++ ++#define SRAM_SIZE 0x2000 ++static ssize_t gemini_ipi_write(struct file *file_p, const char *buf, size_t count, loff_t * ppos) ++{ ++ int i=0,tmp=0,j; ++ const char *ptr=(unsigned int)__phys_to_virt(CPU_1_MEM_BASE+CPU_1_DATA_OFFSET); ++ DEB(printk("ipi:write 0x%x to 0x%x length:%d\n",&buf,ptr,count)); ++ memcpy(ptr,buf,count); ++ consistent_sync(ptr,count, DMA_TO_DEVICE); ++ //hw_memcpy(ptr,&buf,count); ++ ++/* if(count>SRAM_SIZE){ ++ for(i=0;i<(count/SRAM_SIZE);i++) ++ raid_memcpy(ptr+i*SRAM_SIZE,buf+i*SRAM_SIZE,SRAM_SIZE); ++ if(count%SRAM_SIZE) ++ raid_memcpy(ptr+i*SRAM_SIZE,buf+i*SRAM_SIZE,count%SRAM_SIZE); ++ } ++ else ++ raid_memcpy(ptr,buf,count); ++*/ ++ ++/* for(i=0;iSRAM_SIZE){ ++ for(i=0;i<(count/SRAM_SIZE);i++) ++ raid_memcpy(buf+i*SRAM_SIZE,p_mbox->message+i*SRAM_SIZE,SRAM_SIZE); ++ if(count%0xFFFF) ++ raid_memcpy(buf+i*SRAM_SIZE,p_mbox->message+i*SRAM_SIZE,length%SRAM_SIZE); ++ } ++ else ++ raid_memcpy(buf,p_mbox->message,length); ++*/ ++ return length; ++} ++ ++void do_mapping_read(struct address_space *mapping, ++ struct file_ra_state *_ra, ++ struct file *filp, ++ loff_t *ppos, ++ read_descriptor_t *desc, ++ read_actor_t actor) ++{ ++ struct inode *inode = mapping->host; ++ unsigned long index; ++ unsigned long end_index; ++ unsigned long offset; ++ unsigned long last_index; ++ unsigned long next_index; ++ unsigned long prev_index; ++ loff_t isize; ++ struct page *cached_page; ++ int error; ++ struct file_ra_state ra = *_ra; ++ ++ cached_page = NULL; ++ index = *ppos >> PAGE_CACHE_SHIFT; ++ next_index = index; ++ prev_index = ra.prev_page; ++ last_index = (*ppos + desc->count + PAGE_CACHE_SIZE-1) >> PAGE_CACHE_SHIFT; ++ offset = *ppos & ~PAGE_CACHE_MASK; ++ ++ isize = i_size_read(inode); ++ if (!isize) ++ goto out; ++ ++ end_index = (isize - 1) >> PAGE_CACHE_SHIFT; ++ for (;;) { ++ struct page *page; ++ unsigned long nr, ret; ++ ++ /* nr is the maximum number of bytes to copy from this page */ ++ nr = PAGE_CACHE_SIZE; ++ if (index >= end_index) { ++ if (index > end_index) ++ goto out; ++ nr = ((isize - 1) & ~PAGE_CACHE_MASK) + 1; ++ if (nr <= offset) { ++ goto out; ++ } ++ } ++ nr = nr - offset; ++ ++ cond_resched(); ++ if (index == next_index) ++ next_index = page_cache_readahead(mapping, &ra, filp, ++ index, last_index - index); ++ ++find_page: ++ page = find_get_page(mapping, index); ++ if (unlikely(page == NULL)) { ++ handle_ra_miss(mapping, &ra, index); ++ goto no_cached_page; ++ } ++ if (!PageUptodate(page)) ++ goto page_not_up_to_date; ++page_ok: ++ ++ /* If users can be writing to this page using arbitrary ++ * virtual addresses, take care about potential aliasing ++ * before reading the page on the kernel side. ++ */ ++ if (mapping_writably_mapped(mapping)) ++ flush_dcache_page(page); ++ ++ /* ++ * When (part of) the same page is read multiple times ++ * in succession, only mark it as accessed the first time. ++ */ ++ if (prev_index != index) ++ mark_page_accessed(page); ++ prev_index = index; ++ ++ /* ++ * Ok, we have the page, and it's up-to-date, so ++ * now we can copy it to user space... ++ * ++ * The actor routine returns how many bytes were actually used.. ++ * NOTE! This may not be the same as how much of a user buffer ++ * we filled up (we may be padding etc), so we can only update ++ * "pos" here (the actor routine has to update the user buffer ++ * pointers and the remaining count). ++ */ ++ ret = actor(desc, page, offset, nr); ++ offset += ret; ++ index += offset >> PAGE_CACHE_SHIFT; ++ offset &= ~PAGE_CACHE_MASK; ++ ++ page_cache_release(page); ++ if (ret == nr && desc->count) ++ continue; ++ goto out; ++ ++page_not_up_to_date: ++ /* Get exclusive access to the page ... */ ++ lock_page(page); ++ ++ /* Did it get unhashed before we got the lock? */ ++ if (!page->mapping) { ++ unlock_page(page); ++ page_cache_release(page); ++ continue; ++ } ++ ++ /* Did somebody else fill it already? */ ++ if (PageUptodate(page)) { ++ unlock_page(page); ++ goto page_ok; ++ } ++ ++readpage: ++ /* Start the actual read. The read will unlock the page. */ ++ error = mapping->a_ops->readpage(filp, page); ++ ++ if (unlikely(error)) ++ goto readpage_error; ++ ++ if (!PageUptodate(page)) { ++ lock_page(page); ++ if (!PageUptodate(page)) { ++ if (page->mapping == NULL) { ++ /* ++ * invalidate_inode_pages got it ++ */ ++ unlock_page(page); ++ page_cache_release(page); ++ goto find_page; ++ } ++ unlock_page(page); ++ error = -EIO; ++ goto readpage_error; ++ } ++ unlock_page(page); ++ } ++ ++ /* ++ * i_size must be checked after we have done ->readpage. ++ * ++ * Checking i_size after the readpage allows us to calculate ++ * the correct value for "nr", which means the zero-filled ++ * part of the page is not copied back to userspace (unless ++ * another truncate extends the file - this is desired though). ++ */ ++ isize = i_size_read(inode); ++ end_index = (isize - 1) >> PAGE_CACHE_SHIFT; ++ if (unlikely(!isize || index > end_index)) { ++ page_cache_release(page); ++ goto out; ++ } ++ ++ /* nr is the maximum number of bytes to copy from this page */ ++ nr = PAGE_CACHE_SIZE; ++ if (index == end_index) { ++ nr = ((isize - 1) & ~PAGE_CACHE_MASK) + 1; ++ if (nr <= offset) { ++ page_cache_release(page); ++ goto out; ++ } ++ } ++ nr = nr - offset; ++ goto page_ok; ++ ++readpage_error: ++ /* UHHUH! A synchronous read error occurred. Report it */ ++ desc->error = error; ++ page_cache_release(page); ++ goto out; ++ ++no_cached_page: ++ /* ++ * Ok, it wasn't cached, so we need to create a new ++ * page.. ++ */ ++ if (!cached_page) { ++ cached_page = page_cache_alloc_cold(mapping); ++ if (!cached_page) { ++ desc->error = -ENOMEM; ++ goto out; ++ } ++ } ++ error = add_to_page_cache_lru(cached_page, mapping, ++ index, GFP_KERNEL); ++ if (error) { ++ if (error == -EEXIST) ++ goto find_page; ++ desc->error = error; ++ goto out; ++ } ++ page = cached_page; ++ cached_page = NULL; ++ goto readpage; ++ } ++ ++out: ++ *_ra = ra; ++ ++ *ppos = ((loff_t) index << PAGE_CACHE_SHIFT) + offset; ++ if (cached_page) ++ page_cache_release(cached_page); ++ if (filp) ++ file_accessed(filp); ++} ++ ++int ipi_send_actor(read_descriptor_t * desc, struct page *page, unsigned long offset, unsigned long size) ++{ ++ ssize_t written; ++ unsigned long count = desc->count; ++ struct file *file = desc->arg.data; ++ unsigned int *ptr_to=(unsigned int)__phys_to_virt(CPU_1_MEM_BASE+CPU_1_DATA_OFFSET) + desc->written; ++ void *ptr_from; ++ ++ if (size > count) ++ size = count; ++ ++ ptr_from = page_address(page)+offset; ++ written = memcpy(ptr_to,ptr_from,size); ++ ++ if (written < 0) { ++ desc->error = written; ++ written = 0; ++ } ++ desc->count = count - written; ++ desc->written += written; ++ return written; ++} ++ ++ssize_t gemini_ipi_sendfile(struct file *in_file, loff_t *ppos, ++ size_t count, read_actor_t actor, void *TARGET) ++{ ++ read_descriptor_t desc; ++ ++ if (!count) ++ return 0; ++ ++ desc.written = 0; ++ desc.count = count; ++ desc.arg.data = TARGET; ++ desc.error = 0; ++ ++ do_mapping_read(in_file->f_mapping,&in_file->f_ra,in_file, ppos, &desc, ipi_send_actor); ++ ++ if (desc.written) ++ return desc.written; ++ return desc.error; ++} ++static struct file_operations gemini_ipi_fops = { ++ .owner = THIS_MODULE, ++ .ioctl = gemini_ipi_ioctl, ++ .open = gemini_ipi_open, ++ .release= gemini_ipi_release, ++ .write = gemini_ipi_write, ++ .read = gemini_ipi_read, ++ .sendfile = gemini_ipi_sendfile, ++}; ++ ++#ifndef STORLINK_IPI ++#define STORLINK_IPI 242 // Documents/devices.txt suggest to use 240~255 for local driver!! ++#endif ++ ++static struct miscdevice gemini_ipi_miscdev = ++{ ++ STORLINK_IPI, ++ "slave_ipc", ++ &gemini_ipi_fops ++}; ++ ++int __init sl_ipi_init(void) ++{ ++ ++ printk("Gemini IPI Driver Initialization...\n"); ++ printk("REQ Head :0x%x(phy:0x%x)\n",(unsigned int)req,(unsigned int)SL2312_SRAM_BASE); ++ printk("RSP Head :0x%x(phy:0x%x)\n",(unsigned int)rsp,(unsigned int)SL2312_SRAM_BASE+0x20); ++ printk("Data buff:0x%x(phy:0x%x)\n",__phys_to_virt(CPU_1_MEM_BASE+CPU_1_DATA_OFFSET),CPU_1_MEM_BASE+CPU_1_DATA_OFFSET); ++ ++ misc_register(&gemini_ipi_miscdev); ++ ++ if (request_irq(IRQ_CPU0_IP_IRQ_OFFSET, ipi_interrupt, SA_INTERRUPT, "ipi", NULL)) ++ printk("Error: Register IRQ for Storlink IPI failed\n"); ++ ++ return 0; ++} ++ ++void __exit sl_ipi_exit(void) ++{ ++ ++} ++ ++module_init(sl_ipi_init); ++module_exit(sl_ipi_exit); ++ ++MODULE_AUTHOR("Jason Lee "); ++MODULE_DESCRIPTION("Storlink IPI driver"); ++MODULE_LICENSE("GPL"); +--- /dev/null ++++ b/arch/arm/mach-sl2312/hw_xor.h +@@ -0,0 +1,573 @@ ++/* ++* linux/include/asm-arm/xor.h ++* ++* Copyright (C) 2001 Storlink Semi. ++* Jason Lee ++* ++*/ ++#include ++#include ++//#include ++ ++#undef BIG_ENDIAN ++#define CPU 0 ++#define DMA 1 ++ ++#define DESC_NO 8 ++#define TX_DESC_NUM DESC_NO ++#define RX_DESC_NUM DESC_NO ++ ++#define RAID_BASE_ADDR IO_ADDRESS(SL2312_RAID_BASE) ++ ++#define SRAM_PAR_0k 0 ++#define SRAM_PAR_4k 1 ++#define SRAM_PAR_8k 2 ++#define SRAM_PAR_16k 3 ++#define SRAM_PAR_SIZE SRAM_PAR_8k ++ ++#define RUNNING 0x1 ++#define COMPLETE 0x2 ++#define ERROR 0x4 ++ ++#define CMD_XOR 0x0 ++#define CMD_FILL 0x1 ++#define CMD_CPY 0x3 ++#define CMD_CHK 0x4 ++ ++enum RAID_DMA_REGISTER { ++ RAID_DMA_DEVICE_ID = 0xff00, ++ RAID_DMA_STATUS = 0xff04, ++ RAID_FCHDMA_CTRL = 0xff08, ++ RAID_FCHDMA_FIRST_DESC = 0xff0C, ++ RAID_FCHDMA_CURR_DESC = 0xff10, ++ RAID_STRDMA_CTRL = 0xff14, ++ RAID_STRDMA_FIRST_DESC = 0xff18, ++ RAID_STRDMA_CURR_DESC = 0xff1C, ++ RAID_TX_FLG_REG = 0xff24, ++ RAID_RX_FLG_REG = 0xff34, ++ RAID_PCR = 0xff50, ++ SMC_CMD_REG = 0xff60, ++ SMC_STATUS_REG = 0xff64 ++ }; ++ ++enum RAID_FUNC_MODE { ++ RAID_XOR = 0, ++ RAID_MIX = 2, ++ RAID_SRAM = 3, ++ RAID_ENDIAN = 4, ++ RAID_MEM_BLK = 5, ++ RAID_MEM2MEM = 7, ++ RAID_BUF_SIZE = 8, ++ RAID_ERR_TEST = 9, ++ RAID_BURST = 10, ++ RAID_BUS = 11 ++ }; ++ ++typedef struct reg_info { ++ int mask; ++ char err[32]; ++ int offset; ++} REG_INFO; ++ ++/********************************************************/ ++/* the definition of RAID DMA Module Register */ ++/********************************************************/ ++typedef union ++{ ++ unsigned int bit32; ++ struct bits_ff00 ++ { ++ #ifdef BIG_ENDIAN ++ unsigned int : 8; ++ unsigned int teytPerr : 4; /* define protocol error under tsPErrI*/ ++ unsigned int reytPerr : 14; /* define protocol error under rsPErrI */ ++ unsigned int device_id : 12; ++ unsigned int revision_id : 4; ++ #else ++ unsigned int revision_id : 4; ++ unsigned int device_id : 12; ++ unsigned int reytPerr : 14; /* define protocol error under rsPErrI */ ++ unsigned int teytPerr : 4; /* define protocol error under tsPErrI*/ ++ unsigned int : 8; ++ #endif ++ } bits; ++} RAID_DMA_DEVICE_ID_T; ++ ++typedef union ++{ ++ unsigned int bits32; ++ struct bits_ff04 ++ { ++ #ifdef BIG_ENDIAN ++ unsigned int tsFinishI : 1; /* owner bit error interrupt */ ++ unsigned int tsDErrI : 1; /* AHB bus error interrupt */ ++ unsigned int tsPErrI : 1; /* RAID XOR fetch descriptor protocol error interrupt */ ++ unsigned int tsEODI : 1; /* RAID XOR fetch DMA end of descriptor interrupt */ ++ unsigned int tsEOFI : 1; /* RAID XOR fetch DMA end of frame interrupt */ ++ unsigned int rsFinishI : 1; /* owner bit error interrupt */ ++ unsigned int rsDErrI : 1; /* AHB bus error while RAID XOR store interrupt */ ++ unsigned int rsPErrI : 1; /* RAID XOR store descriptor protocol error interrupt */ ++ unsigned int rsEODI : 1; /* RAID XOR store DMA end of descriptor interrupt */ ++ unsigned int rsEOFI : 1; /* RAID XOR store DMA end of frame interrupt */ ++ unsigned int inter : 8; /* pattern check error interrupt */ ++ unsigned int : 5; ++ unsigned int Loopback : 1; /* loopback */ ++ unsigned int intEnable : 8; /*pattern check error interrupt enable */ ++ #else ++ unsigned int intEnable : 8; /*pattern check error interrupt enable */ ++ unsigned int Loopback : 1; /* loopback */ ++ unsigned int : 5; ++ unsigned int inter : 8; /* pattern check error interrupt */ ++ unsigned int rsEOFI : 1; /* RAID XOR store DMA end of frame interrupt */ ++ unsigned int rsEODI : 1; /* RAID XOR store DMA end of descriptor interrupt */ ++ unsigned int rsPErrI : 1; /* RAID XOR store descriptor protocol error interrupt */ ++ unsigned int rsDErrI : 1; /* AHB bus error while RAID XOR store interrupt */ ++ unsigned int rsFinishI : 1; /* owner bit error interrupt */ ++ unsigned int tsEOFI : 1; /* RAID XOR fetch DMA end of frame interrupt */ ++ unsigned int tsEODI : 1; /* RAID XOR fetch DMA end of descriptor interrupt */ ++ unsigned int tsPErrI : 1; /* RAID XOR fetch descriptor protocol error interrupt */ ++ unsigned int tsDErrI : 1; /* AHB bus error interrupt */ ++ unsigned int tsFinishI : 1; /* owner bit error interrupt */ ++ #endif ++ } bits; ++} RAID_DMA_STATUS_T; ++ ++ ++typedef union ++{ ++ unsigned int bits32; ++ struct bits_ff08 ++ { ++ #ifdef BIG_ENDIAN ++ unsigned int td_start : 1; /* Start DMA transfer */ ++ unsigned int td_continue : 1; /* Continue DMA operation */ ++ unsigned int td_chain_mode : 1; /* Descriptor Chain Mode;1-Descriptor Chain mode, 0-Direct DMA mode*/ ++ unsigned int : 1; ++ unsigned int td_prot : 4; /* DMA protection control */ ++ unsigned int td_burst_size : 2; /* DMA max burst size for every AHB request */ ++ unsigned int td_bus : 2; /* peripheral bus width */ ++ unsigned int td_endian : 1; /* AHB Endian. 0-little endian; 1-big endian */ ++ unsigned int td_finish_en : 1; /* DMA Finish Event Interrupt Enable;1-enable;0-mask */ ++ unsigned int td_fail_en : 1; /* DMA Fail Interrupt Enable;1-enable;0-mask */ ++ unsigned int td_perr_en : 1; /* Protocol Failure Interrupt Enable;1-enable;0-mask */ ++ unsigned int td_eod_en : 1; /* End of Descriptor interrupt Enable;1-enable;0-mask */ ++ unsigned int td_eof_en : 1; /* End of frame interrupt Enable;1-enable;0-mask */ ++ unsigned int : 14; ++ #else ++ unsigned int : 14; ++ unsigned int td_eof_en : 1; /* End of frame interrupt Enable;1-enable;0-mask */ ++ unsigned int td_eod_en : 1; /* End of Descriptor interrupt Enable;1-enable;0-mask */ ++ unsigned int td_perr_en : 1; /* Protocol Failure Interrupt Enable;1-enable;0-mask */ ++ unsigned int td_fail_en : 1; /* DMA Fail Interrupt Enable;1-enable;0-mask */ ++ unsigned int td_finish_en : 1; /* DMA Finish Event Interrupt Enable;1-enable;0-mask */ ++ unsigned int td_endian : 1; /* AHB Endian. 0-little endian; 1-big endian */ ++ unsigned int td_bus : 2; /* peripheral bus width;0 - 8 bits;1 - 16 bits */ ++ unsigned int td_burst_size : 2; /* TxDMA max burst size for every AHB request */ ++ unsigned int td_prot : 4; /* TxDMA protection control */ ++ unsigned int : 1; ++ unsigned int td_chain_mode : 1; /* Descriptor Chain Mode;1-Descriptor Chain mode, 0-Direct DMA mode*/ ++ unsigned int td_continue : 1; /* Continue DMA operation */ ++ unsigned int td_start : 1; /* Start DMA transfer */ ++ #endif ++ } bits; ++} RAID_TXDMA_CTRL_T; ++ ++typedef union ++{ ++ unsigned int bits32; ++ struct bits_ff0c ++ { ++ #ifdef BIG_ENDIAN ++ unsigned int td_first_des_ptr : 28;/* first descriptor address */ ++ unsigned int td_busy : 1;/* 1-TxDMA busy; 0-TxDMA idle */ ++ unsigned int : 3; ++ #else ++ unsigned int : 3; ++ unsigned int td_busy : 1;/* 1-TxDMA busy; 0-TxDMA idle */ ++ unsigned int td_first_des_ptr : 28;/* first descriptor address */ ++ #endif ++ } bits; ++} RAID_TXDMA_FIRST_DESC_T; ++ ++typedef union ++{ ++ unsigned int bits32; ++ struct bits_ff10 ++ { ++ #ifdef BIG_ENDIAN ++ unsigned int ndar : 28; /* next descriptor address */ ++ unsigned int eofie : 1; /* end of frame interrupt enable */ ++ unsigned int : 1; ++ unsigned int sof_eof : 2; ++ #else ++ unsigned int sof_eof : 2; ++ unsigned int : 1; ++ unsigned int eofie : 1; /* end of frame interrupt enable */ ++ unsigned int ndar : 28; /* next descriptor address */ ++ #endif ++ } bits; ++} RAID_TXDMA_CURR_DESC_T; ++ ++typedef union ++{ ++ unsigned int bits32; ++ struct bits_ff14 ++ { ++ #ifdef BIG_ENDIAN ++ unsigned int rd_start : 1; /* Start DMA transfer */ ++ unsigned int rd_continue : 1; /* Continue DMA operation */ ++ unsigned int rd_chain_mode : 1; /* Descriptor Chain Mode;1-Descriptor Chain mode, 0-Direct DMA mode*/ ++ unsigned int : 1; ++ unsigned int rd_prot : 4; /* DMA protection control */ ++ unsigned int rd_burst_size : 2; /* DMA max burst size for every AHB request */ ++ unsigned int rd_bus : 2; /* peripheral bus width;0 - 8 bits;1 - 16 bits */ ++ unsigned int rd_endian : 1; /* AHB Endian. 0-little endian; 1-big endian */ ++ unsigned int rd_finish_en : 1; /* DMA Finish Event Interrupt Enable;1-enable;0-mask */ ++ unsigned int rd_fail_en : 1; /* DMA Fail Interrupt Enable;1-enable;0-mask */ ++ unsigned int rd_perr_en : 1; /* Protocol Failure Interrupt Enable;1-enable;0-mask */ ++ unsigned int rd_eod_en : 1; /* End of Descriptor interrupt Enable;1-enable;0-mask */ ++ unsigned int rd_eof_en : 1; /* End of frame interrupt Enable;1-enable;0-mask */ ++ unsigned int : 14; ++ #else ++ unsigned int : 14; ++ unsigned int rd_eof_en : 1; /* End of frame interrupt Enable;1-enable;0-mask */ ++ unsigned int rd_eod_en : 1; /* End of Descriptor interrupt Enable;1-enable;0-mask */ ++ unsigned int rd_perr_en : 1; /* Protocol Failure Interrupt Enable;1-enable;0-mask */ ++ unsigned int rd_fail_en : 1; /* DMA Fail Interrupt Enable;1-enable;0-mask */ ++ unsigned int rd_finish_en : 1; /* DMA Finish Event Interrupt Enable;1-enable;0-mask */ ++ unsigned int rd_endian : 1; /* AHB Endian. 0-little endian; 1-big endian */ ++ unsigned int rd_bus : 2; /* peripheral bus width;0 - 8 bits;1 - 16 bits */ ++ unsigned int rd_burst_size : 2; /* DMA max burst size for every AHB request */ ++ unsigned int rd_prot : 4; /* DMA protection control */ ++ unsigned int : 1; ++ unsigned int rd_chain_mode : 1; /* Descriptor Chain Mode;1-Descriptor Chain mode, 0-Direct DMA mode*/ ++ unsigned int rd_continue : 1; /* Continue DMA operation */ ++ unsigned int rd_start : 1; /* Start DMA transfer */ ++ #endif ++ } bits; ++} RAID_RXDMA_CTRL_T; ++ ++typedef union ++{ ++ unsigned int bits32; ++ struct bits_ff18 ++ { ++ #ifdef BIG_ENDIAN ++ unsigned int rd_first_des_ptr : 28;/* first descriptor address */ ++ unsigned int rd_busy : 1;/* 1-RxDMA busy; 0-RxDMA idle */ ++ unsigned int : 3; ++ #else ++ unsigned int : 3; ++ unsigned int rd_busy : 1;/* 1-RxDMA busy; 0-RxDMA idle */ ++ unsigned int rd_first_des_ptr : 28;/* first descriptor address */ ++ #endif ++ } bits; ++} RAID_RXDMA_FIRST_DESC_T; ++ ++typedef union ++{ ++ unsigned int bits32; ++ struct bits_ff1c ++ { ++ #ifdef BIG_ENDIAN ++ unsigned int ndar : 28; /* next descriptor address */ ++ unsigned int eofie : 1; /* end of frame interrupt enable */ ++ unsigned int dec : 1; /* AHB bus address increment(0)/decrement(1) */ ++ unsigned int sof_eof : 2; ++ #else ++ unsigned int sof_eof : 2; ++ unsigned int dec : 1; /* AHB bus address increment(0)/decrement(1) */ ++ unsigned int eofie : 1; /* end of frame interrupt enable */ ++ unsigned int ndar : 28; /* next descriptor address */ ++ #endif ++ } bits; ++} RAID_RXDMA_CURR_DESC_T; ++ ++typedef union ++{ ++ unsigned int bit32; ++ struct bits_ff50 ++ { ++ unsigned int pat : 32; /* data for pattern check */ ++ } bits; ++} RAID_PACR_T; ++ ++/******************************************************/ ++/* the definition of DMA Descriptor Register */ ++/******************************************************/ ++typedef struct raid_descriptor_t ++{ ++ union func_ctrl_t ++ { ++ unsigned int bit32; ++ struct bits_0000 ++ { ++ #ifdef BIG_ENDIAN ++ unsigned int own : 1; /* owner bit */ ++ unsigned int derr : 1; /* data error during processing this descriptor */ ++ unsigned int perr : 1; /* protocol error during processing this descriptor */ ++ unsigned int raid_ctrl_status : 7; /* pass RAID XOR fetch/store control status to CPU */ ++ unsigned int desc_cnt : 6; ++ unsigned int buffer_size : 16; /* transfer buffer size associated with current description*/ ++ #else ++ unsigned int buffer_size : 16; /* transfer buffer size associated with current description*/ ++ unsigned int desc_cnt : 6; ++ unsigned int raid_ctrl_status : 7; /* pass RAID XOR fetch/store control status to CPU */ ++ unsigned int perr : 1; /* protocol error during processing this descriptor */ ++ unsigned int derr : 1; /* data error during processing this descriptor */ ++ unsigned int own : 1; /* owner bit */ ++ #endif ++ } bits; ++ } func_ctrl; ++ ++ union flg_status_t ++ { ++ unsigned int bits32; ++ struct bit_004 ++ { ++ #ifdef BIG_ENDIAN ++ unsigned int bcc : 16; ++ unsigned int : 13 ++ unsigned int mode : 3; ++ #else ++ unsigned int mode : 3; ++ unsigned int : 13; ++ unsigned int bcc : 16; ++ #endif ++ } bits_cmd_status; ++ } flg_status; //Sanders ++ ++ unsigned int buf_addr; ++ ++ union next_desc_addr_t ++ { ++ unsigned int bits32; ++ struct bits_000c ++ { ++ #ifdef BIG_ENDIAN ++ unsigned int ndar : 28; /* next descriptor address */ ++ unsigned int eofie : 1; /* end of frame interrupt enable */ ++ unsigned int : 1; ++ unsigned int sof_eof : 2; /* the position of the descriptor in chain */ ++ #else ++ unsigned int sof_eof : 2; /* the position of the descriptor in chain */ ++ unsigned int : 1; ++ unsigned int eofie : 1; /* end of frame interrupt enable */ ++ unsigned int ndar : 28; /* next descriptor address */ ++ #endif ++ } bits; ++ } next_desc_addr; ++} RAID_DESCRIPTOR_T; ++ ++/******************************************************/ ++/* the offset of RAID SMC register */ ++/******************************************************/ ++enum RAID_SMC_REGISTER { ++ RAID_SMC_CMD_REG = 0xff60, ++ RAID_SMC_STATUS_REG = 0xff64 ++ }; ++ ++/******************************************************/ ++/* the definition of RAID SMC module register */ ++/******************************************************/ ++typedef union ++{ ++ unsigned int bits32; ++ struct bits_ff60 ++ { ++ #ifdef BIG_ENDIAN ++ unsigned int pat_mode : 2; /* partition mode selection */ ++ unsigned int : 14; ++ unsigned int device_id : 12; ++ unsigned int revision_id : 4; ++ #else ++ unsigned int revision_id : 4; ++ unsigned int device_id : 12; ++ unsigned int : 14; ++ unsigned int pat_mode : 2; /* partition mode selection */ ++ #endif ++ } bits; ++} RAID_SMC_CMD; ++ ++typedef union ++{ ++ unsigned int bits32; ++ struct bits_ff64 ++ { ++ #ifdef BIG_ENDIAN ++ unsigned int addr_err1 : 1; /* address is out of range for controller 1 */ ++ unsigned int ahb_err1 : 1; /* AHB bus error for controller 1 */ ++ unsigned int : 14; ++ unsigned int addr_err2 : 1; /* address is out of range for controller 2 */ ++ unsigned int ahb_err2 : 1; /* AHB bus error for controller 2 */ ++ unsigned int : 14; ++ #else ++ unsigned int : 14; ++ unsigned int ahb_err2 : 1; /* AHB bus error for controller 2 */ ++ unsigned int addr_err2 : 1; /* address is out of range for controller 2 */ ++ unsigned int : 14; ++ unsigned int ahb_err1 : 1; /* AHB bus error for controller 1 */ ++ unsigned int addr_err1 : 1; /* address is out of range for controller 1 */ ++ #endif ++ } bits; ++} RAID_SMC_STATUS; ++ ++typedef struct RAID_S ++{ ++ const char *device_name; ++ wait_queue_head_t wait; ++ unsigned int busy; ++ int irq; ++ unsigned int status; ++ RAID_DESCRIPTOR_T *tx_desc; /* point to virtual TX descriptor address */ ++ RAID_DESCRIPTOR_T *rx_desc; /* point ot virtual RX descriptor address */ ++ RAID_DESCRIPTOR_T *tx_cur_desc; /* current TX descriptor */ ++ RAID_DESCRIPTOR_T *rx_cur_desc; /* current RX descriptor */ ++ RAID_DESCRIPTOR_T *tx_finished_desc; ++ RAID_DESCRIPTOR_T *rx_finished_desc; ++ RAID_DESCRIPTOR_T *tx_first_desc; ++ RAID_DESCRIPTOR_T *rx_first_desc; ++ ++// unsigned int *tx_buf[TX_DESC_NUM]; ++ unsigned int *rx_desc_dma; // physical address of rx_descript ++ unsigned int *tx_desc_dma; // physical address of tx_descript ++ unsigned int *rx_bufs_dma; ++ unsigned int *tx_bufs_dma; ++ ++} RAID_T; ++ ++struct reg_ioctl ++{ ++ unsigned int reg_addr; ++ unsigned int val_in; ++ unsigned int val_out; ++}; ++ ++typedef struct dma_ctrl { ++ int sram; ++ int prot; ++ int burst; ++ int bus; ++ int endian; ++ int mode; ++} DMA_CTRL; ++ ++ ++#ifdef XOR_SW_FILL_IN ++ ++#define __XOR(a1, a2) a1 ^= a2 ++ ++#define GET_BLOCK_2(dst) \ ++ __asm__("ldmia %0, {%1, %2}" \ ++ : "=r" (dst), "=r" (a1), "=r" (a2) \ ++ : "0" (dst)) ++ ++#define GET_BLOCK_4(dst) \ ++ __asm__("ldmia %0, {%1, %2, %3, %4}" \ ++ : "=r" (dst), "=r" (a1), "=r" (a2), "=r" (a3), "=r" (a4) \ ++ : "0" (dst)) ++ ++#define XOR_BLOCK_2(src) \ ++ __asm__("ldmia %0!, {%1, %2}" \ ++ : "=r" (src), "=r" (b1), "=r" (b2) \ ++ : "0" (src)); \ ++ __XOR(a1, b1); __XOR(a2, b2); ++ ++#define XOR_BLOCK_4(src) \ ++ __asm__("ldmia %0!, {%1, %2, %3, %4}" \ ++ : "=r" (src), "=r" (b1), "=r" (b2), "=r" (b3), "=r" (b4) \ ++ : "0" (src)); \ ++ __XOR(a1, b1); __XOR(a2, b2); __XOR(a3, b3); __XOR(a4, b4) ++ ++#define PUT_BLOCK_2(dst) \ ++ __asm__ __volatile__("stmia %0!, {%2, %3}" \ ++ : "=r" (dst) \ ++ : "0" (dst), "r" (a1), "r" (a2)) ++ ++#define PUT_BLOCK_4(dst) \ ++ __asm__ __volatile__("stmia %0!, {%2, %3, %4, %5}" \ ++ : "=r" (dst) \ ++ : "0" (dst), "r" (a1), "r" (a2), "r" (a3), "r" (a4)) ++ ++static void ++xor_arm4regs_2(unsigned long bytes, unsigned long *p1, unsigned long *p2) ++{ ++ unsigned int lines = bytes / sizeof(unsigned long) / 4; ++ register unsigned int a1 __asm__("r4"); ++ register unsigned int a2 __asm__("r5"); ++ register unsigned int a3 __asm__("r6"); ++ register unsigned int a4 __asm__("r7"); ++ register unsigned int b1 __asm__("r8"); ++ register unsigned int b2 __asm__("r9"); ++ register unsigned int b3 __asm__("ip"); ++ register unsigned int b4 __asm__("lr"); ++ ++ do { ++ GET_BLOCK_4(p1); ++ XOR_BLOCK_4(p2); ++ PUT_BLOCK_4(p1); ++ } while (--lines); ++} ++ ++static void ++xor_arm4regs_3(unsigned long bytes, unsigned long *p1, unsigned long *p2, ++ unsigned long *p3) ++{ ++ unsigned int lines = bytes / sizeof(unsigned long) / 4; ++ register unsigned int a1 __asm__("r4"); ++ register unsigned int a2 __asm__("r5"); ++ register unsigned int a3 __asm__("r6"); ++ register unsigned int a4 __asm__("r7"); ++ register unsigned int b1 __asm__("r8"); ++ register unsigned int b2 __asm__("r9"); ++ register unsigned int b3 __asm__("ip"); ++ register unsigned int b4 __asm__("lr"); ++ ++ do { ++ GET_BLOCK_4(p1); ++ XOR_BLOCK_4(p2); ++ XOR_BLOCK_4(p3); ++ PUT_BLOCK_4(p1); ++ } while (--lines); ++} ++ ++static void ++xor_arm4regs_4(unsigned long bytes, unsigned long *p1, unsigned long *p2, ++ unsigned long *p3, unsigned long *p4) ++{ ++ unsigned int lines = bytes / sizeof(unsigned long) / 2; ++ register unsigned int a1 __asm__("r8"); ++ register unsigned int a2 __asm__("r9"); ++ register unsigned int b1 __asm__("ip"); ++ register unsigned int b2 __asm__("lr"); ++ ++ do { ++ GET_BLOCK_2(p1); ++ XOR_BLOCK_2(p2); ++ XOR_BLOCK_2(p3); ++ XOR_BLOCK_2(p4); ++ PUT_BLOCK_2(p1); ++ } while (--lines); ++} ++ ++static void ++xor_arm4regs_5(unsigned long bytes, unsigned long *p1, unsigned long *p2, ++ unsigned long *p3, unsigned long *p4, unsigned long *p5) ++{ ++ unsigned int lines = bytes / sizeof(unsigned long) / 2; ++ register unsigned int a1 __asm__("r8"); ++ register unsigned int a2 __asm__("r9"); ++ register unsigned int b1 __asm__("ip"); ++ register unsigned int b2 __asm__("lr"); ++ ++ do { ++ GET_BLOCK_2(p1); ++ XOR_BLOCK_2(p2); ++ XOR_BLOCK_2(p3); ++ XOR_BLOCK_2(p4); ++ XOR_BLOCK_2(p5); ++ PUT_BLOCK_2(p1); ++ } while (--lines); ++} ++#endif //XOR_SW_FILL_IN ++ +--- /dev/null ++++ b/arch/arm/mach-sl2312/irq.c +@@ -0,0 +1,202 @@ ++/* ++ * linux/arch/arm/mach-epxa10db/irq.c ++ * ++ * Copyright (C) 2001 Altera Corporation ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; either version 2 of the License, or ++ * (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA ++ */ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#ifdef CONFIG_PCI ++#include ++#endif ++ ++int fixup_irq(unsigned int irq) ++{ ++#ifdef CONFIG_PCI ++ if (irq == IRQ_PCI) { ++ return sl2312_pci_get_int_src(); ++ } ++#endif ++ return irq; ++} ++ ++static void sl2312_ack_irq(unsigned int irq) ++{ ++ __raw_writel(1 << irq, IRQ_CLEAR(IO_ADDRESS(SL2312_INTERRUPT_BASE))); ++} ++ ++static void sl2312_mask_irq(unsigned int irq) ++{ ++ unsigned int mask; ++ ++#ifdef CONFIG_PCI ++ if (irq >= PCI_IRQ_OFFSET) ++ { ++ mask = __raw_readl(IRQ_MASK(IO_ADDRESS(SL2312_INTERRUPT_BASE))); ++ mask &= ~IRQ_PCI_MASK ; ++ __raw_writel(mask, IRQ_MASK(IO_ADDRESS(SL2312_INTERRUPT_BASE))); ++ sl2312_pci_mask_irq(irq - PCI_IRQ_OFFSET); ++ } ++ else ++#endif ++ if(irq >= FIQ_OFFSET) ++ { ++ mask = __raw_readl(FIQ_MASK(IO_ADDRESS(SL2312_INTERRUPT_BASE))); ++ mask &= ~(1 << (irq - FIQ_OFFSET)); ++ __raw_writel(mask, FIQ_MASK(IO_ADDRESS(SL2312_INTERRUPT_BASE))); ++ } ++ else ++ { ++ mask = __raw_readl(IRQ_MASK(IO_ADDRESS(SL2312_INTERRUPT_BASE))); ++ mask &= ~(1 << irq); ++ __raw_writel(mask, IRQ_MASK(IO_ADDRESS(SL2312_INTERRUPT_BASE))); ++ } ++ ++} ++ ++static void sl2312_unmask_irq(unsigned int irq) ++{ ++ unsigned int mask; ++ ++#ifdef CONFIG_PCI ++ if (irq >= PCI_IRQ_OFFSET) ++ { ++ mask = __raw_readl(IRQ_MASK(IO_ADDRESS(SL2312_INTERRUPT_BASE))); ++ mask |= IRQ_PCI_MASK ; ++ __raw_writel(mask, IRQ_MASK(IO_ADDRESS(SL2312_INTERRUPT_BASE))); ++ sl2312_pci_unmask_irq(irq - PCI_IRQ_OFFSET); ++ } ++ else ++#endif ++ if(irq >= FIQ_OFFSET) ++ { ++ mask = __raw_readl(FIQ_MASK(IO_ADDRESS(SL2312_INTERRUPT_BASE))); ++ mask |= (1 << (irq - FIQ_OFFSET)); ++ __raw_writel(mask, FIQ_MASK(IO_ADDRESS(SL2312_INTERRUPT_BASE))); ++ } ++ else ++ { ++ mask = __raw_readl(IRQ_MASK(IO_ADDRESS(SL2312_INTERRUPT_BASE))); ++ mask |= (1 << irq); ++ __raw_writel(mask, IRQ_MASK(IO_ADDRESS(SL2312_INTERRUPT_BASE))); ++ } ++} ++ ++static struct irq_chip sl2312_level_irq = { ++ .ack = sl2312_mask_irq, ++ .mask = sl2312_mask_irq, ++ .unmask = sl2312_unmask_irq, ++// .set_type = ixp4xx_set_irq_type, ++}; ++ ++static struct irq_chip sl2312_edge_irq = { ++ .ack = sl2312_ack_irq, ++ .mask = sl2312_mask_irq, ++ .unmask = sl2312_unmask_irq, ++// .set_type = ixp4xx_set_irq_type, ++}; ++ ++static struct resource irq_resource = { ++ .name = "irq_handler", ++ .start = IO_ADDRESS(SL2312_INTERRUPT_BASE), ++ .end = IO_ADDRESS(FIQ_STATUS(SL2312_INTERRUPT_BASE))+4, ++}; ++ ++void __init sl2312_init_irq(void) ++{ ++ unsigned int i, mode, level; ++ ++ request_resource(&iomem_resource, &irq_resource); ++ ++ for (i = 0; i < NR_IRQS; i++) ++ { ++ if((i>=IRQ_TIMER1 && i<=IRQ_TIMER3)||(i>=IRQ_SERIRQ0 && i<=IRQ_SERIRQ_MAX)) ++ { ++ set_irq_chip(i, &sl2312_edge_irq); ++ set_irq_handler(i, handle_edge_irq); ++ } ++ else ++ { ++ set_irq_chip(i, &sl2312_level_irq); ++ set_irq_handler(i,handle_level_irq); ++ } ++ set_irq_flags(i, IRQF_VALID | IRQF_PROBE); ++ } ++ ++ /* Disable all interrupt */ ++ __raw_writel(0,IRQ_MASK(IO_ADDRESS(SL2312_INTERRUPT_BASE))); ++ __raw_writel(0,FIQ_MASK(IO_ADDRESS(SL2312_INTERRUPT_BASE))); ++ ++ /* Set interrupt mode */ ++ /* emac & ipsec type is level trigger and high active */ ++ mode = __raw_readl(IRQ_TMODE(IO_ADDRESS(SL2312_INTERRUPT_BASE))); ++ level = __raw_readl(IRQ_TLEVEL(IO_ADDRESS(SL2312_INTERRUPT_BASE))); ++ ++ mode &= ~IRQ_GMAC0_MASK; ++ level &= ~IRQ_GMAC0_MASK; ++ ++ mode &= ~IRQ_GMAC1_MASK; ++ level &= ~IRQ_GMAC1_MASK; ++ ++ mode &= ~IRQ_IPSEC_MASK; ++ level &= ~IRQ_IPSEC_MASK; ++ ++ // for IDE0,1, high active and level trigger ++ mode &= ~IRQ_IDE0_MASK; ++ level &= ~IRQ_IDE0_MASK; ++ mode &= ~IRQ_IDE1_MASK; ++ level &= ~IRQ_IDE1_MASK; ++ ++ ++ // for PCI, high active and level trigger ++ mode &= ~IRQ_PCI_MASK; ++ level &= ~IRQ_PCI_MASK; ++ ++ // for USB, high active and level trigger ++ mode &= ~IRQ_USB0_MASK; ++ level &= ~IRQ_USB0_MASK; ++ ++ mode &= ~IRQ_USB1_MASK; ++ level &= ~IRQ_USB1_MASK; ++ ++ // for LPC, high active and edge trigger ++ mode |= 0xffff0000; ++ level &= 0x0000ffff; ++ ++ // for GPIO, high active and level trigger ++ mode &= ~(IRQ_GPIO_MASK); ++ level &= ~(IRQ_GPIO_MASK); ++ ++ mode &= ~(IRQ_GPIO1_MASK); ++ level &= ~(IRQ_GPIO1_MASK); ++ ++ mode &= ~(IRQ_GPIO2_MASK); ++ level &= ~(IRQ_GPIO2_MASK); ++ ++ __raw_writel(mode,IRQ_TMODE(IO_ADDRESS(SL2312_INTERRUPT_BASE))); ++ __raw_writel(level,IRQ_TLEVEL(IO_ADDRESS(SL2312_INTERRUPT_BASE))); ++ ++} +--- /dev/null ++++ b/arch/arm/mach-sl2312/lpc.c +@@ -0,0 +1,125 @@ ++/* ++ * ++ * BRIEF MODULE DESCRIPTION ++ * ITE Semi IT8712 Super I/O functions. ++ * ++ * Copyright 2001 MontaVista Software Inc. ++ * Author: MontaVista Software, Inc. ++ * ppopov@mvista.com or source@mvista.com ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License as published by the ++ * Free Software Foundation; either version 2 of the License, or (at your ++ * option) any later version. ++ * ++ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED ++ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF ++ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN ++ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, ++ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT ++ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF ++ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ++ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT ++ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF ++ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. ++ * ++ * You should have received a copy of the GNU General Public License along ++ * with this program; if not, write to the Free Software Foundation, Inc., ++ * 675 Mass Ave, Cambridge, MA 02139, USA. ++ */ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#ifndef TRUE ++#define TRUE 1 ++#endif ++ ++#ifndef FALSE ++#define FALSE 0 ++#endif ++ ++ ++// MB PnP configuration register ++#define LPC_KEY_ADDR (IO_ADDRESS(SL2312_LPC_IO_BASE) + 0x2e) ++#define LPC_DATA_ADDR (IO_ADDRESS(SL2312_LPC_IO_BASE) + 0x2f) ++ ++#define LPC_BUS_CTRL *(volatile unsigned char*) (IO_ADDRESS(SL2312_LPC_HOST_BASE) + 0) ++#define LPC_BUS_STATUS *(volatile unsigned char*) (IO_ADDRESS(SL2312_LPC_HOST_BASE) + 2) ++#define LPC_SERIAL_IRQ_CTRL *(volatile unsigned char*) (IO_ADDRESS(SL2312_LPC_HOST_BASE) + 4) ++ ++int it8712_exist; ++ ++static void LPCEnterMBPnP(void) ++{ ++ int i; ++ unsigned char key[4] = {0x87, 0x01, 0x55, 0x55}; ++ ++ for (i = 0; i<4; i++) ++ outb(key[i], LPC_KEY_ADDR); ++ ++} ++ ++static void LPCExitMBPnP(void) ++{ ++ outb(0x02, LPC_KEY_ADDR); ++ outb(0x02, LPC_DATA_ADDR); ++} ++ ++void LPCSetConfig(char LdnNumber, char Index, char data) ++{ ++ LPCEnterMBPnP(); // Enter IT8712 MB PnP mode ++ outb(0x07, LPC_KEY_ADDR); ++ outb(LdnNumber, LPC_DATA_ADDR); ++ outb(Index, LPC_KEY_ADDR); ++ outb(data, LPC_DATA_ADDR); ++ LPCExitMBPnP(); ++} ++ ++char LPCGetConfig(char LdnNumber, char Index) ++{ ++ char rtn; ++ ++ LPCEnterMBPnP(); // Enter IT8712 MB PnP mode ++ outb(0x07, LPC_KEY_ADDR); ++ outb(LdnNumber, LPC_DATA_ADDR); ++ outb(Index, LPC_KEY_ADDR); ++ rtn = inb(LPC_DATA_ADDR); ++ LPCExitMBPnP(); ++ return rtn; ++} ++ ++static int SearchIT8712(void) ++{ ++ unsigned char Id1, Id2; ++ unsigned short Id; ++ ++ LPCEnterMBPnP(); ++ outb(0x20, LPC_KEY_ADDR); /* chip id byte 1 */ ++ Id1 = inb(LPC_DATA_ADDR); ++ outb(0x21, LPC_KEY_ADDR); /* chip id byte 2 */ ++ Id2 = inb(LPC_DATA_ADDR); ++ Id = (Id1 << 8) | Id2; ++ LPCExitMBPnP(); ++ if (Id == 0x8712) ++ return TRUE; ++ else ++ return FALSE; ++} ++ ++int InitLPCInterface(void) ++{ ++ LPC_BUS_CTRL = 0xc0; ++ LPC_SERIAL_IRQ_CTRL = 0xc0; ++ mdelay(1); // wait for 1 serial IRQ cycle ++ LPC_SERIAL_IRQ_CTRL = 0x80; ++ it8712_exist = SearchIT8712(); ++ printk("IT8712 %s exist\n", it8712_exist?"":"doesn't"); ++ return 0; ++} ++ ++//__initcall(InitLPCInterface); +--- /dev/null ++++ b/arch/arm/mach-sl2312/mm.c +@@ -0,0 +1,80 @@ ++/* ++ * linux/arch/arm/mach-epxa10db/mm.c ++ * ++ * MM routines for Altera'a Epxa10db board ++ * ++ * Copyright (C) 2001 Altera Corporation ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; either version 2 of the License, or ++ * (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA ++ */ ++#include ++#include ++#include ++ ++#include ++#include ++#include ++#include ++#include ++ ++#include ++ ++/* Page table mapping for I/O region */ ++static struct map_desc sl2312_io_desc[] __initdata = { ++#ifdef CONFIG_GEMINI_IPI ++{__phys_to_virt(CPU_1_MEM_BASE), __phys_to_pfn(CPU_1_MEM_BASE), SZ_64M, MT_MEMORY}, ++#endif ++{IO_ADDRESS(SL2312_SRAM_BASE), __phys_to_pfn(SL2312_SRAM_BASE), SZ_512K, MT_DEVICE}, ++{IO_ADDRESS(SL2312_DRAM_CTRL_BASE), __phys_to_pfn(SL2312_DRAM_CTRL_BASE), SZ_512K, MT_DEVICE}, ++{IO_ADDRESS(SL2312_GLOBAL_BASE), __phys_to_pfn(SL2312_GLOBAL_BASE), SZ_512K, MT_DEVICE}, ++{IO_ADDRESS(SL2312_WAQTCHDOG_BASE), __phys_to_pfn(SL2312_WAQTCHDOG_BASE), SZ_512K, MT_DEVICE}, ++{IO_ADDRESS(SL2312_UART_BASE), __phys_to_pfn(SL2312_UART_BASE), SZ_512K, MT_DEVICE}, ++{IO_ADDRESS(SL2312_TIMER_BASE), __phys_to_pfn(SL2312_TIMER_BASE), SZ_512K, MT_DEVICE}, ++{IO_ADDRESS(SL2312_LCD_BASE), __phys_to_pfn(SL2312_LCD_BASE), SZ_512K, MT_DEVICE}, ++{IO_ADDRESS(SL2312_RTC_BASE), __phys_to_pfn(SL2312_RTC_BASE), SZ_512K, MT_DEVICE}, ++{IO_ADDRESS(SL2312_SATA_BASE), __phys_to_pfn(SL2312_SATA_BASE), SZ_512K, MT_DEVICE}, ++{IO_ADDRESS(SL2312_LPC_HOST_BASE), __phys_to_pfn(SL2312_LPC_HOST_BASE), SZ_512K, MT_DEVICE}, ++{IO_ADDRESS(SL2312_LPC_IO_BASE), __phys_to_pfn(SL2312_LPC_IO_BASE), SZ_512K, MT_DEVICE}, ++{IO_ADDRESS(SL2312_INTERRUPT_BASE), __phys_to_pfn(SL2312_INTERRUPT_BASE), SZ_512K, MT_DEVICE}, ++{IO_ADDRESS(SL2312_INTERRUPT1_BASE), __phys_to_pfn(SL2312_INTERRUPT1_BASE), SZ_512K, MT_DEVICE}, ++{IO_ADDRESS(SL2312_SSP_CTRL_BASE), __phys_to_pfn(SL2312_SSP_CTRL_BASE), SZ_512K, MT_DEVICE}, ++{IO_ADDRESS(SL2312_POWER_CTRL_BASE), __phys_to_pfn(SL2312_POWER_CTRL_BASE), SZ_512K, MT_DEVICE}, ++{IO_ADDRESS(SL2312_CIR_BASE), __phys_to_pfn(SL2312_CIR_BASE), SZ_512K, MT_DEVICE}, ++{IO_ADDRESS(SL2312_GPIO_BASE), __phys_to_pfn(SL2312_GPIO_BASE), SZ_512K, MT_DEVICE}, ++{IO_ADDRESS(SL2312_GPIO_BASE1), __phys_to_pfn(SL2312_GPIO_BASE1), SZ_512K, MT_DEVICE}, ++{IO_ADDRESS(SL2312_GPIO_BASE2), __phys_to_pfn(SL2312_GPIO_BASE2), SZ_512K, MT_DEVICE}, ++{IO_ADDRESS(SL2312_PCI_IO_BASE), __phys_to_pfn(SL2312_PCI_IO_BASE), SZ_512K, MT_DEVICE}, ++{IO_ADDRESS(SL2312_PCI_MEM_BASE), __phys_to_pfn(SL2312_PCI_MEM_BASE), SZ_512K, MT_DEVICE}, ++#ifdef CONFIG_NET_SL351X ++{IO_ADDRESS(SL2312_TOE_BASE), __phys_to_pfn(SL2312_TOE_BASE) , SZ_512K, MT_DEVICE}, ++#endif ++{IO_ADDRESS(SL2312_GMAC0_BASE), __phys_to_pfn(SL2312_GMAC0_BASE), SZ_512K, MT_DEVICE}, ++{IO_ADDRESS(SL2312_GMAC1_BASE), __phys_to_pfn(SL2312_GMAC1_BASE), SZ_512K, MT_DEVICE}, ++{IO_ADDRESS(SL2312_SECURITY_BASE), __phys_to_pfn(SL2312_SECURITY_BASE), SZ_512K, MT_DEVICE}, ++{IO_ADDRESS(SL2312_IDE0_BASE), __phys_to_pfn(SL2312_IDE0_BASE), SZ_512K, MT_DEVICE}, ++{IO_ADDRESS(SL2312_IDE1_BASE), __phys_to_pfn(SL2312_IDE1_BASE), SZ_512K, MT_DEVICE}, ++{IO_ADDRESS(SL2312_RAID_BASE), __phys_to_pfn(SL2312_RAID_BASE), SZ_512K, MT_DEVICE}, ++{IO_ADDRESS(SL2312_FLASH_CTRL_BASE), __phys_to_pfn(SL2312_FLASH_CTRL_BASE), SZ_512K, MT_DEVICE}, ++{IO_ADDRESS(SL2312_DRAM_CTRL_BASE), __phys_to_pfn(SL2312_DRAM_CTRL_BASE), SZ_512K, MT_DEVICE}, ++{IO_ADDRESS(SL2312_GENERAL_DMA_BASE), __phys_to_pfn(SL2312_GENERAL_DMA_BASE), SZ_512K, MT_DEVICE}, ++{IO_ADDRESS(SL2312_USB0_BASE), __phys_to_pfn(SL2312_USB_BASE), SZ_512K, MT_DEVICE}, ++{IO_ADDRESS(SL2312_USB1_BASE), __phys_to_pfn(SL2312_USB1_BASE), SZ_512K, MT_DEVICE}, ++{FLASH_VADDR(SL2312_FLASH_BASE), __phys_to_pfn(SL2312_FLASH_BASE), SZ_16M, MT_DEVICE}, ++}; ++ ++void __init sl2312_map_io(void) ++{ ++ iotable_init(sl2312_io_desc, ARRAY_SIZE(sl2312_io_desc)); ++} +--- /dev/null ++++ b/arch/arm/mach-sl2312/pci.c +@@ -0,0 +1,359 @@ ++/* ++ * linux/arch/arm/mach-sl2312/pci_sl2312.c ++ * ++ * PCI functions for sl2312 host PCI bridge ++ * ++ * Copyright (C) 2003 StorLink Corp. ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; either version 2 of the License, or ++ * (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA ++ */ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#include ++ ++//#define DEBUG ++ ++// sl2312 PCI bridge access routines ++ ++#define PCI_IOSIZE_REG (*(volatile unsigned long *) (IO_ADDRESS(SL2312_PCI_IO_BASE))) ++#define PCI_PROT_REG (*(volatile unsigned long *) (IO_ADDRESS(SL2312_PCI_IO_BASE) + 0x04)) ++#define PCI_CTRL_REG (*(volatile unsigned long *) (IO_ADDRESS(SL2312_PCI_IO_BASE) + 0x08)) ++#define PCI_SOFTRST_REG (*(volatile unsigned long *) (IO_ADDRESS(SL2312_PCI_IO_BASE) + 0x10)) ++#define PCI_CONFIG_REG (*(volatile unsigned long *) (IO_ADDRESS(SL2312_PCI_IO_BASE) + 0x28)) ++#define PCI_DATA_REG (*(volatile unsigned long *) (IO_ADDRESS(SL2312_PCI_IO_BASE) + 0x2C)) ++ ++static spinlock_t sl2312_pci_lock = SPIN_LOCK_UNLOCKED; ++// for initialize PCI devices ++struct resource pci_ioport_resource = { ++ .name = "PCI I/O Space", ++ .start = IO_ADDRESS(SL2312_PCI_IO_BASE) + 0x100, ++ .end = IO_ADDRESS(SL2312_PCI_IO_BASE) + SZ_512K - 1, ++ .flags = IORESOURCE_IO, ++}; ++struct resource pci_iomem_resource = { ++ .name = "PCI Mem Space", ++ .start = SL2312_PCI_MEM_BASE, ++ .end = SL2312_PCI_MEM_BASE + SZ_128M - 1, ++ .flags = IORESOURCE_MEM, ++}; ++ ++static int sl2312_read_config(struct pci_bus *bus, unsigned int devfn, int where,int size, u32 *val) ++{ ++ unsigned long addr,data; ++ unsigned long flags; ++ ++ spin_lock_irqsave(&sl2312_pci_lock, flags); ++ addr = 0x80000000 | (PCI_SLOT(devfn) << 11) | (PCI_FUNC(devfn) << 8) | (where & ~3); ++ PCI_CONFIG_REG = addr; ++ data = PCI_DATA_REG; ++ ++ switch (size) { ++ case 1: ++ *val = (u8) (data >> ((where & 0x03) * 8)); ++ break; ++ case 2: ++ *val = (u16) (data >> ((where & 0x02) * 8)); ++ break; ++ case 4: ++ *val = data; ++ if ((where >= 0x10) && (where <= 0x24)) { ++ if ((*val & 0xfff00000) == SL2312_PCI_IO_BASE) { ++ *val &= 0x000fffff; ++ *val |= IO_ADDRESS(SL2312_PCI_IO_BASE); ++ } ++ } ++ break; ++ } ++ spin_unlock_irqrestore(&sl2312_pci_lock, flags); ++// printk("READ==>slot=%d fn=%d where=%d value=%x\n",PCI_SLOT(devfn),PCI_FUNC(devfn),where,*val); ++ return PCIBIOS_SUCCESSFUL; ++} ++ ++static int sl2312_write_config(struct pci_bus *bus, unsigned int devfn, int where,int size, u32 val) ++{ ++ unsigned long addr,data; ++ unsigned long flags; ++ ++ spin_lock_irqsave(&sl2312_pci_lock, flags); ++ addr = 0x80000000 | (PCI_SLOT(devfn) << 11) | (PCI_FUNC(devfn) << 8) | (where & ~3); ++ PCI_CONFIG_REG = addr; ++ data = PCI_DATA_REG; ++ ++ switch (size) { ++ case 1: ++ data &= ~(0xff << ((where & 0x03) * 8)); ++ data |= (val << ((where & 0x03) * 8)); ++ PCI_DATA_REG = data; ++ break; ++ case 2: ++ data &= ~(0xffff << ((where & 0x02) * 8)); ++ data |= (val << ((where & 0x02) * 8)); ++ PCI_DATA_REG = data; ++ break; ++ case 4: ++ if ((where >= 0x10) && (where <= 0x24)) { ++ if ((val & 0xfff00000) == IO_ADDRESS(SL2312_PCI_IO_BASE)) { ++ val &= 0x000fffff; ++ val |= SL2312_PCI_IO_BASE; ++ } ++ } ++ PCI_DATA_REG = val; ++ break; ++ } ++ spin_unlock_irqrestore(&sl2312_pci_lock, flags); ++ ++// printk("WRITE==> slot=%d fn=%d where=%d value=%x \n",PCI_SLOT(devfn),PCI_FUNC(devfn),where,val); ++ return PCIBIOS_SUCCESSFUL; ++} ++ ++static struct pci_ops sl2312_pci_ops = { ++ .read = sl2312_read_config, ++ .write = sl2312_write_config, ++}; ++ ++ ++int __init sl2312_pci_setup_resources(struct resource **resource) ++{ ++ PCI_IOSIZE_REG = 0; // 1M IO size ++ PCI_CTRL_REG = 0x06; ++ ++ resource[0] = &pci_ioport_resource; ++ resource[1] = &pci_iomem_resource; ++ resource[2] = NULL; ++ ++ return 1; ++} ++ ++//static int sl2312_pci_fault(unsigned long addr, struct pt_regs *regs) ++//{ ++// return 1; ++//} ++ ++ ++/********************************************************************** ++ * MASK(disable) PCI interrupt ++ * 0: PCI INTA, 1: PCI INTB, ... // for Linux interrupt routing ++ * 16: PERR // for PCI module internal use ++ * 17: SERR,.. respect to PCI CTRL2 REG ++ **********************************************************************/ ++void sl2312_pci_mask_irq(unsigned int irq) ++{ ++ struct pci_bus bus; ++ unsigned int tmp; ++ ++ bus.number = 0; ++ sl2312_read_config(&bus, 0, SL2312_PCI_CTRL2, 4, &tmp); ++ if (irq < 16) { // for linux int routing ++ tmp &= ~(1 << (irq + 16 + 6)); ++ } ++ else { ++ tmp &= ~(1 << irq); ++ } ++ sl2312_write_config(&bus, 0, SL2312_PCI_CTRL2, 4, tmp); ++} ++ ++/* UNMASK(enable) PCI interrupt */ ++void sl2312_pci_unmask_irq(unsigned int irq) ++{ ++ struct pci_bus bus; ++ unsigned int tmp; ++ ++ bus.number = 0; ++ sl2312_read_config(&bus, 0, SL2312_PCI_CTRL2, 4, &tmp); ++ if (irq < 16) { // for linux int routing ++ tmp |= (1 << (irq + 16 + 6)); ++ } ++ else { ++ tmp |= (1 << irq); ++ } ++ sl2312_write_config(&bus, 0, SL2312_PCI_CTRL2, 4, tmp); ++} ++ ++/* Get PCI interrupt source */ ++int sl2312_pci_get_int_src(void) ++{ ++ struct pci_bus bus; ++ unsigned int tmp=0; ++ ++ bus.number = 0; ++ sl2312_read_config(&bus, 0, SL2312_PCI_CTRL2, 4, &tmp); ++ if (tmp & (1 << 28)) { // PCI INTA ++ sl2312_write_config(&bus, 0, SL2312_PCI_CTRL2, 4, tmp); ++ return IRQ_PCI_INTA; ++ } ++ if (tmp & (1 << 29)) { // PCI INTB ++ sl2312_write_config(&bus, 0, SL2312_PCI_CTRL2, 4, tmp); ++ return IRQ_PCI_INTB; ++ } ++ if (tmp & (1 << 30)) { // PCI INTC ++ sl2312_write_config(&bus, 0, SL2312_PCI_CTRL2, 4, tmp); ++ return IRQ_PCI_INTC; ++ } ++ if (tmp & (1 << 31)) { // PCI INTD ++ sl2312_write_config(&bus, 0, SL2312_PCI_CTRL2, 4, tmp); ++ return IRQ_PCI_INTD; ++ } ++ // otherwise, it should be a PCI error ++ return IRQ_PCI; ++} ++ ++static irqreturn_t sl2312_pci_irq(int irq, void *devid) ++{ ++ struct irq_desc *desc; ++ struct irqaction *action; ++ int retval = 0; ++ ++ return 1; ++ ++ irq = sl2312_pci_get_int_src(); ++ desc = &irq_desc[irq]; ++ action = desc->action; ++ do { ++ retval |= action->handler(irq, devid); ++ action = action->next; ++ } while (action); ++ ++ return 1; ++} ++ ++//extern int (*external_fault)(unsigned long addr, struct pt_regs *regs); ++ ++void __init sl2312_pci_preinit(void) ++{ ++ struct pci_bus bus; ++ unsigned long flags; ++ unsigned int temp; ++ int ret; ++ ++ /* ++ * Hook in our fault handler for PCI errors ++ */ ++// external_fault = sl2312_pci_fault; ++ ++ spin_lock_irqsave(&sl2312_pci_lock, flags); ++ ++ /* ++ * Grab the PCI interrupt. ++ */ ++ ret = request_irq(IRQ_PCI, sl2312_pci_irq, 0, "sl2312 pci int", NULL); ++ if (ret) ++ printk(KERN_ERR "PCI: unable to grab PCI error " ++ "interrupt: %d\n", ret); ++ ++ spin_unlock_irqrestore(&sl2312_pci_lock, flags); ++ ++ // setup pci bridge ++ bus.number = 0; /* device 0, function 0 */ ++ temp = (SL2312_PCI_DMA_MEM1_BASE & 0xfff00000) | (SL2312_PCI_DMA_MEM1_SIZE << 16); ++ sl2312_write_config(&bus, 0, SL2312_PCI_MEM1_BASE_SIZE, 4, temp); ++} ++ ++/* ++ * No swizzle on SL2312 ++ */ ++static u8 __init sl2312_pci_swizzle(struct pci_dev *dev, u8 *pinp) ++{ ++ return PCI_SLOT(dev->devfn); ++} ++ ++/* ++ * map the specified device/slot/pin to an IRQ. This works out such ++ * that slot 9 pin 1 is INT0, pin 2 is INT1, and slot 10 pin 1 is INT1. ++ */ ++static int __init sl2312_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin) ++{ ++ int intnr = ((slot + (pin - 1)) & 3) + 4; /* the IRQ number of PCI bridge */ ++ ++ // printk("%s : slot = %d pin = %d \n",__func__,slot,pin); ++ switch (slot) ++ { ++ case 12: ++ if (pin==1) ++ { ++ intnr = 3; ++ } ++ else ++ { ++ intnr = 0; ++ } ++ break; ++ case 11: ++ intnr = (2 + (pin - 1)) & 3; ++ break; ++ case 10: ++ intnr = (1 + (pin - 1)) & 3; ++ break; ++ case 9: ++ intnr = (pin - 1) & 3; ++ break; ++ } ++// if (slot == 10) ++// intnr = (1 + (pin - 1)) & 3; ++// else if (slot == 9) ++// intnr = (pin - 1) & 3; ++ return (IRQ_PCI_INTA + intnr); ++} ++ ++struct pci_bus * __init sl2312_pci_scan_bus(int nr, struct pci_sys_data *sysdata) ++{ ++ return (pci_scan_bus(0, &sl2312_pci_ops, sysdata)); ++ ++} ++ ++int __init sl2312_pci_setup(int nr, struct pci_sys_data *sys) ++{ ++ int ret = 0; ++ ++ if (nr == 0) { ++ ret = sl2312_pci_setup_resources(sys->resource); ++ } ++ ++ return ret; ++} ++ ++ ++struct hw_pci sl2312_pci __initdata = { ++ .setup = sl2312_pci_setup, ++ .preinit = sl2312_pci_preinit, ++ .nr_controllers = 1, ++ .swizzle = sl2312_pci_swizzle, ++ .map_irq = sl2312_pci_map_irq, ++ .scan = sl2312_pci_scan_bus, ++}; ++ ++static int __init sl2312_pci_init(void) ++{ ++ if (machine_is_sl2312()) ++ pci_common_init(&sl2312_pci); ++ return 0; ++} ++ ++subsys_initcall(sl2312_pci_init); +--- /dev/null ++++ b/arch/arm/mach-sl2312/sl2312-otg-1.c +@@ -0,0 +1,64 @@ ++/* ++ * linux/arch/arm/mach-pxa/sl2312.c ++ * ++ * Author: Nicolas Pitre ++ * Created: Nov 05, 2002 ++ * Copyright: MontaVista Software Inc. ++ * ++ * Code specific to sl2312 aka Bulverde. ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++ */ ++#include ++#include ++#include ++#include ++#include ++#include "asm/arch/sl2312.h" ++#include "asm/arch/irqs.h" ++#include ++#include ++#include ++ ++/* ++ * device registration specific to sl2312. ++ */ ++ ++static u64 sl2312_dmamask_1 = 0xffffffffUL; ++ ++static struct resource sl2312_otg_resources_1[] = { ++ [0] = { ++ .start = 0x69000000, ++ .end = 0x69000fff, ++ .flags = IORESOURCE_MEM, ++ }, ++ [1] = { ++ .start = IRQ_USB1, ++ .end = IRQ_USB1, ++ .flags = IORESOURCE_IRQ, ++ }, ++}; ++ ++static struct platform_device ehci_1_device = { ++ .name = "ehci-hcd-FOTG2XX", ++ .id = -1, ++ .dev = { ++ .dma_mask = &sl2312_dmamask_1, ++ .coherent_dma_mask = 0xffffffff, ++ }, ++ .num_resources = ARRAY_SIZE(sl2312_otg_resources_1), ++ .resource = sl2312_otg_resources_1, ++}; ++ ++static struct platform_device *devices[] __initdata = { ++ &ehci_1_device, ++}; ++ ++static int __init sl2312_1_init(void) ++{ ++ return platform_add_devices(devices, ARRAY_SIZE(devices)); ++} ++ ++subsys_initcall(sl2312_1_init); +--- /dev/null ++++ b/arch/arm/mach-sl2312/sl2312-otg.c +@@ -0,0 +1,87 @@ ++/* ++ * linux/arch/arm/mach-pxa/sl2312.c ++ * ++ * Author: Nicolas Pitre ++ * Created: Nov 05, 2002 ++ * Copyright: MontaVista Software Inc. ++ * ++ * Code specific to sl2312 aka Bulverde. ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++ */ ++#include ++#include ++#include ++#include ++#include ++#include "asm/arch/sl2312.h" ++#include "asm/arch/irqs.h" ++#include ++#include ++#include ++ ++/* ++ * device registration specific to sl2312. ++ */ ++ ++static u64 sl2312_dmamask = 0xffffffffUL; ++ ++static struct resource sl2312_otg_resources_1[] = { ++ [0] = { ++ .start = 0x68000000, ++ .end = 0x68000fff, ++ .flags = IORESOURCE_MEM, ++ }, ++ [1] = { ++ .start = IRQ_USB0, ++ .end = IRQ_USB0, ++ .flags = IORESOURCE_IRQ, ++ }, ++}; ++static struct resource sl2312_otg_resources_2[] = { ++ [2] = { ++ .start = 0x69000000, ++ .end = 0x69000fff, ++ .flags = IORESOURCE_MEM, ++ }, ++ [3] = { ++ .start = IRQ_USB1, ++ .end = IRQ_USB1, ++ .flags = IORESOURCE_IRQ, ++ }, ++}; ++ ++static struct platform_device ehci_device_1 = { ++ .name = "ehci-hcd-FOTG2XX", ++ .id = 1, ++ .dev = { ++ .dma_mask = &sl2312_dmamask, ++ .coherent_dma_mask = 0xffffffff, ++ }, ++ .num_resources = ARRAY_SIZE(sl2312_otg_resources_1), ++ .resource = sl2312_otg_resources_1, ++}; ++ ++static struct platform_device ehci_device_2 = { ++ .name = "ehci-hcd-FOTG2XX", ++ .id = 2, ++ .dev = { ++ .dma_mask = &sl2312_dmamask, ++ .coherent_dma_mask = 0xffffffff, ++ }, ++ .num_resources = ARRAY_SIZE(sl2312_otg_resources_2), ++ .resource = sl2312_otg_resources_2, ++}; ++ ++static struct platform_device *devices[] __initdata = { ++ &ehci_device_1, /* &ehci_device_2, */ ++}; ++ ++static int __init sl2312_init(void) ++{ ++ return platform_add_devices(devices, ARRAY_SIZE(devices)); ++} ++ ++subsys_initcall(sl2312_init); +--- /dev/null ++++ b/arch/arm/mach-sl2312/sl3516_device.c +@@ -0,0 +1,89 @@ ++/* ++ * linux/arch/arm/mach-2312/sl3516_device.c ++ * ++ * Author: Nicolas Pitre ++ * Created: Nov 05, 2002 ++ * Copyright: MontaVista Software Inc. ++ * ++ * Code specific to sl2312 aka Bulverde. ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++ */ ++#include ++#include ++#include ++#include ++#include ++#include ++#include "asm/arch/sl2312.h" ++#include "asm/arch/irqs.h" ++#include ++#include ++ ++/* ++ * device registration specific to sl2312. ++ */ ++ ++static u64 sl3516_dmamask = 0xffffffffUL; ++ ++static struct resource sl3516_sata_resources[] = { ++ [0] = { ++ .start = 0x63400000, ++ .end = 0x63400040, ++ .flags = IORESOURCE_MEM, ++ }, ++ [1] = { ++ .start = IRQ_IDE1, ++ .end = IRQ_IDE1, ++ .flags = IORESOURCE_IRQ, ++ }, ++}; ++ ++static struct platform_device sata_device = { ++ .name = "lepus-sata", ++ .id = -1, ++ .dev = { ++ .dma_mask = &sl3516_dmamask, ++ .coherent_dma_mask = 0xffffffff, ++ }, ++ .num_resources = ARRAY_SIZE(sl3516_sata_resources), ++ .resource = sl3516_sata_resources, ++}; ++ ++static struct resource sl3516_sata0_resources[] = { ++ [0] = { ++ .start = 0x63000000, ++ .end = 0x63000040, ++ .flags = IORESOURCE_MEM, ++ }, ++ [1] = { ++ .start = IRQ_IDE0, ++ .end = IRQ_IDE0, ++ .flags = IORESOURCE_IRQ, ++ }, ++}; ++ ++static struct platform_device sata0_device = { ++ .name = "lepus-sata0", ++ .id = -1, ++ .dev = { ++ .dma_mask = &sl3516_dmamask, ++ .coherent_dma_mask = 0xffffffff, ++ }, ++ .num_resources = ARRAY_SIZE(sl3516_sata0_resources), ++ .resource = sl3516_sata0_resources, ++}; ++ ++static struct platform_device *sata_devices[] __initdata = { ++ &sata_device, ++ &sata0_device, ++}; ++ ++static int __init sl3516_init(void) ++{ ++ return platform_add_devices(sata_devices, ARRAY_SIZE(sata_devices)); ++} ++ ++subsys_initcall(sl3516_init); +--- /dev/null ++++ b/arch/arm/mach-sl2312/time.c +@@ -0,0 +1,134 @@ ++/* ++ * linux/include/asm-arm/arch-epxa10db/time.h ++ * ++ * Copyright (C) 2001 Altera Corporation ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; either version 2 of the License, or ++ * (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA ++ */ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#define TIMER_TYPE (volatile unsigned int*) ++#include ++// #define FIQ_PLUS 1 ++ ++ ++/* ++ * IRQ handler for the timer ++ */ ++static irqreturn_t sl2312_timer_interrupt(int irq, void *dev_id) ++{ ++// unsigned int led; ++ // ...clear the interrupt ++#ifdef FIQ_PLUS ++ *((volatile unsigned int *)FIQ_CLEAR(IO_ADDRESS(SL2312_INTERRUPT_BASE))) |= (unsigned int)(IRQ_TIMER1_MASK); ++#else ++ *((volatile unsigned int *)IRQ_CLEAR(IO_ADDRESS(SL2312_INTERRUPT_BASE))) |= (unsigned int)(IRQ_TIMER2_MASK); ++#endif ++ ++#if 0 ++ if(!(jiffies % HZ)) ++ { ++ led = jiffies / HZ; ++// printk("ticks %x \n", led); ++ } ++ do_leds(); ++ do_timer(regs); ++ do_profile(regs); ++#endif ++ timer_tick(); ++ return IRQ_HANDLED; ++} ++ ++static struct irqaction sl2312_timer_irq = { ++ .name = "SL2312 Timer Tick", ++ .flags = IRQF_DISABLED | IRQF_TIMER, ++ .handler = sl2312_timer_interrupt, ++}; ++ ++unsigned long sl2312_gettimeoffset (void) ++{ ++ return 0L; ++} ++ ++/* ++ * Set up timer interrupt, and return the current time in seconds. ++ */ ++void __init sl2312_time_init(void) ++{ ++ // For clock rate adjusting ++ unsigned int tick_rate=0; ++ ++#ifdef CONFIG_SL3516_ASIC ++ unsigned int clock_rate_base = 130000000; ++ unsigned int reg_v=0; ++ ++ //--> Add by jason for clock adjust ++ reg_v = readl(IO_ADDRESS((SL2312_GLOBAL_BASE+GLOBAL_STATUS))); ++ reg_v >>= 15; ++ tick_rate = (clock_rate_base + (reg_v & 0x07)*10000000); ++ ++ // FPGA use AHB bus tick rate ++ printk("Bus: %dMHz",tick_rate/1000000); ++ ++ tick_rate /= 6; // APB bus run AHB*(1/6) ++ ++ switch((reg_v>>3)&3){ ++ case 0: printk("(1/1)\n") ; ++ break; ++ case 1: printk("(3/2)\n") ; ++ break; ++ case 2: printk("(24/13)\n") ; ++ break; ++ case 3: printk("(2/1)\n") ; ++ break; ++ } ++ //<-- ++#else ++ printk("Bus: %dMHz(1/1)\n",CLOCK_TICK_RATE/1000000); // FPGA use 20MHz ++ tick_rate = CLOCK_TICK_RATE; ++#endif ++ ++ ++ /* ++ * Make irqs happen for the system timer ++ */ ++ // initialize timer interrupt ++ // low active and edge trigger ++#ifdef FIQ_PLUS ++ *((volatile unsigned int *)FIQ_TMODE(IO_ADDRESS(SL2312_INTERRUPT_BASE))) |= (unsigned int)(IRQ_TIMER1_MASK); ++ *((volatile unsigned int *)FIQ_LEVEL(IO_ADDRESS(SL2312_INTERRUPT_BASE))) |= (unsigned int)(IRQ_TIMER1_MASK); ++ setup_irq(IRQ_TIMER1, &sl2312_timer_irq); ++ /* Start the timer */ ++ *TIMER_COUNT(IO_ADDRESS(SL2312_TIMER1_BASE))=(unsigned int)(tick_rate/HZ); ++ *TIMER_LOAD(IO_ADDRESS(SL2312_TIMER1_BASE))=(unsigned int)(tick_rate/HZ); ++ *TIMER_CR(IO_ADDRESS(SL2312_TIMER1_BASE))=(unsigned int)(TIMER_1_CR_ENABLE_MSK|TIMER_1_CR_INT_MSK); ++#else ++ *((volatile unsigned int *)IRQ_TMODE(IO_ADDRESS(SL2312_INTERRUPT_BASE))) |= (unsigned int)(IRQ_TIMER2_MASK); ++ *((volatile unsigned int *)IRQ_TLEVEL(IO_ADDRESS(SL2312_INTERRUPT_BASE))) |= (unsigned int)(IRQ_TIMER2_MASK); ++ setup_irq(IRQ_TIMER2, &sl2312_timer_irq); ++ /* Start the timer */ ++ *TIMER_COUNT(IO_ADDRESS(SL2312_TIMER2_BASE))=(unsigned int)(tick_rate/HZ); ++ *TIMER_LOAD(IO_ADDRESS(SL2312_TIMER2_BASE))=(unsigned int)(tick_rate/HZ); ++ *TIMER_CR(IO_ADDRESS(SL2312_TIMER1_BASE))=(unsigned int)(TIMER_2_CR_ENABLE_MSK|TIMER_2_CR_INT_MSK); ++#endif ++ ++} ++ ++ +--- /dev/null ++++ b/arch/arm/mach-sl2312/xor.c +@@ -0,0 +1,1200 @@ ++/* ++ * arch/arm/mach-sl2312/xor.c ++ * ++ * Support functions for the Gemini Soc. This is ++ * a HW XOR unit that is specifically designed for use with RAID5 ++ * applications. This driver provides an interface that is used by ++ * the Linux RAID stack. ++ * ++ * Original Author: Jason Lee ++ * ++ * Contributors:Sanders ++ Jason Lee ++ * ++ * ++ * Maintainer: Jason Lee ++ * ++ * Copyright (C) 2005 Storlink Corporation ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++ * ++ * ++ * History: (06/25/2005, DJ) Initial Creation ++ * ++ * Versing 1.0.0 Initial version ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++/* ++ * pick up local definitions ++ */ ++#define XOR_SW_FILL_IN ++#include "hw_xor.h" ++ ++ ++//#define XOR_DEBUG ++//#define XOR_TEST 1 ++#ifdef XOR_TEST ++#define TEST_ITERATION 1000 ++#define SPIN_WAIT 1 ++#endif ++#ifdef XOR_DEBUG ++#define DPRINTK(s, args...) printk("Gemini XOR: " s "\n", ## args) ++#define DENTER() DPRINTK("Entered...\n"); ++#define DEXIT() DPRINTK("Exited...\n"); ++#else ++#define DPRINTK(s, args...) ++#define DENTER() ++#define DEXIT() ++#endif ++ ++//#define SPIN_WAIT ++ ++/* globals */ ++static RAID_T tp; ++static RAID_TXDMA_CTRL_T txdma_ctrl; ++RAID_RXDMA_CTRL_T rxdma_ctrl; ++ ++//#ifndef SPIN_WAIT ++static spinlock_t raid_lock; ++//#endif ++ ++static unsigned int tx_desc_virtual_base; ++static unsigned int rx_desc_virtual_base; ++RAID_DESCRIPTOR_T *tx_desc_ptr; ++RAID_DESCRIPTOR_T *rx_desc_ptr; ++ ++/* static prototypes */ ++#define DMA_MALLOC(size,handle) pci_alloc_consistent(NULL,size,handle) ++#define DMA_MFREE(mem,size,handle) pci_free_consistent(NULL,size,mem,handle) ++ ++static int gemini_xor_init_desc(void); ++ ++static unsigned int raid_read_reg(unsigned int offset) ++{ ++ unsigned int reg_val; ++ ++ reg_val = readl(RAID_BASE_ADDR + offset); ++ return (reg_val); ++} ++ ++static void raid_write_reg(unsigned int offset,unsigned int data,unsigned int bit_mask) ++{ ++ unsigned int reg_val; ++ unsigned int *addr; ++ ++ reg_val = ( raid_read_reg(offset) & (~bit_mask) ) | (data & bit_mask); ++ addr = (unsigned int *)(RAID_BASE_ADDR + offset); ++ writel(reg_val,addr); ++ return; ++} ++ ++#ifndef SPIN_WAIT ++__inline__ void xor_queue_descriptor(void) ++{ ++ unsigned int flags,status=1; ++ ++ DPRINTK("Going to sleep"); ++ ++ while(status){ ++ yield(); ++ //schedule(); ++ spin_lock_irqsave(&raid_lock,flags); ++ status = tp.busy; ++ spin_unlock_irqrestore(&raid_lock, flags); ++ } ++// tp.status = COMPLETE; ++ DPRINTK("woken up!"); ++ ++} ++#endif ++ ++#ifdef SPIN_WAIT ++static void gemini_xor_isr(int d_n) ++#else ++#if LINUX_VERSION_CODE <= KERNEL_VERSION(2,4,28) ++static void gemini_xor_isr(int irq, void *dev_id, struct pt_regs *regs) ++#elif LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0) ++static irqreturn_t gemini_xor_isr(int irq, void *dev_instance, struct pt_regs *regs) ++#endif ++#endif ++{ ++ ++ unsigned int err; ++ RAID_DMA_STATUS_T dma_status; ++// RAID_DESCRIPTOR_T *rdesc,*tdesc; ++// unsigned int *paddr; ++ ++ dma_status.bits32 = raid_read_reg(RAID_DMA_STATUS); ++#ifdef SPIN_WAIT ++ while( (dma_status.bits32& (1<<31) ) ==0 ){ ++ udelay(1); ++ dma_status.bits32 = raid_read_reg(RAID_DMA_STATUS); ++ } ++ ++/* tdesc = tp.tx_first_desc; ++ rdesc = tp.rx_first_desc; ++ for(d_n;d_n>0;d_n--){ ++ if( tdesc->func_ctrl.bits.own == DMA ){ ++ paddr = tdesc; ++ printk("error tx desc:0x%x\n",*paddr++); ++ printk("error tx desc:0x%x\n",*paddr++); ++ printk("error tx desc:0s%x\n",*paddr++); ++ printk("error tx desc:0x%x\n",*paddr); ++ while(1); ++ } ++ tdesc = (RAID_DESCRIPTOR_T *)((tdesc->next_desc_addr.bits32 & 0xfffffff0)+tx_desc_virtual_base); ++ } ++ ++ if( rdesc->func_ctrl.bits.own == DMA ){ ++ paddr = rdesc; ++ printk("error rx desc:0x%x\n",*paddr++); ++ printk("error rx desc:0x%x\n",*paddr++); ++ printk("error rx desc:0s%x\n",*paddr++); ++ printk("error rx desc:0x%x\n",*paddr); ++ while(1); ++ } ++*/ ++#endif ++ ++ if(dma_status.bits32 & ((1<<31)|(1<<26))){ ++ // if no bug , we can turn off rx finish interrupt ++ dma_status.bits32 = raid_read_reg(RAID_DMA_STATUS); ++ err = raid_read_reg(RAID_DMA_DEVICE_ID); ++ tp.busy = 0; ++ ++ if(err&0x00FF0000){ ++ tp.status = ERROR; ++ printk("XOR:%s error code %x\n",(err&0x00F00000)?"tx":"rx",err); ++ ++#if LINUX_VERSION_CODE <= KERNEL_VERSION(2,4,28) ++ return ; ++#elif LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0) ++#ifndef SPIN_WAIT ++ return IRQ_RETVAL(IRQ_HANDLED); ++#endif ++#endif ++ } ++ // 16~19 rx error code ++ // 20~23 tx error codd ++ ++ dma_status.bits.tsFinishI = 1; ++ dma_status.bits.rsFinishI = 1; ++ raid_write_reg(RAID_DMA_STATUS, dma_status.bits32,0x84000000); // clear INT ++ ++// printk("xor %d\n",d_n); ++#if LINUX_VERSION_CODE <= KERNEL_VERSION(2,4,28) ++ return ; ++#elif LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0) ++#ifndef SPIN_WAIT ++ return IRQ_RETVAL(IRQ_HANDLED); ++#endif ++#endif ++ } ++ ++ #if LINUX_VERSION_CODE <= KERNEL_VERSION(2,4,28) ++ return ; ++ #elif LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0) ++ #ifndef SPIN_WAIT ++ printk("XOR: DMA status register(0x%8x)\n",dma_status.bits32); ++ return IRQ_RETVAL(IRQ_HANDLED); ++ #endif ++ #endif ++} ++ ++void ++xor_gemini_2(unsigned long bytes, unsigned long *p1, unsigned long *p2) ++{ ++ int status=0; ++ unsigned int flags; ++ ++ if(bytes > (1<<(SRAM_PAR_SIZE+11))){ ++ printk("XOR: out of SRAM partition!![0x%x]\n",(unsigned int)bytes); ++ } ++ ++ spin_lock_irqsave(&raid_lock,flags); ++ while(tp.status != COMPLETE){ ++ spin_unlock_irqrestore(&raid_lock, flags); ++ //printk("XOR yield2\n"); ++#ifdef XOR_SW_FILL_IN ++ xor_arm4regs_2(bytes,p1,p2); ++ return ; ++#else ++ yield(); ++#endif ++ } ++ spin_unlock_irqrestore(&raid_lock, flags); ++ tp.status = RUNNING; ++ ++ // flush the cache to memory before H/W XOR touches them ++ consistent_sync(p1, bytes, DMA_BIDIRECTIONAL); ++ consistent_sync(p2, bytes, DMA_TO_DEVICE); ++ ++ ++ tp.tx_desc = tp.tx_first_desc; ++ tp.rx_desc = tp.rx_first_desc; ++ if((tp.tx_desc->func_ctrl.bits.own == CPU)/*&&(tp.rx_desc->func_ctrl.bits.own == DMA)*/){ ++ // prepare tx descript ++ raid_write_reg(RAID_FCHDMA_CURR_DESC,(unsigned int)tp.tx_desc-tx_desc_virtual_base,0xffffffff); ++ tp.tx_desc->buf_addr = (unsigned int)__pa(p1); // physical address ++ tp.tx_desc->func_ctrl.bits.buffer_size = bytes; /* total frame byte count */ ++// tp.tx_desc->flg_status.bits_cmd_status.bcc = 2; // first descript ++// tp.tx_desc->flg_status.bits_cmd_status.mode = 0; // only support XOR command ++ tp.tx_desc->flg_status.bits32 = 0x00020000; ++ tp.tx_desc->next_desc_addr.bits.sof_eof = 0x03; /*only one descriptor*/ ++ tp.tx_desc->func_ctrl.bits.own = DMA; /* set owner bit */ ++ tp.tx_cur_desc = (RAID_DESCRIPTOR_T *)((tp.tx_desc->next_desc_addr.bits32 & 0xfffffff0)+tx_desc_virtual_base); ++ wmb(); ++ tp.tx_desc = tp.tx_cur_desc; ++ tp.tx_desc->buf_addr = (unsigned int)__pa(p2); // pysical address ++ tp.tx_desc->func_ctrl.bits.buffer_size = bytes; /* total frame byte count */ ++// tp.tx_desc->flg_status.bits_cmd_status.bcc = 1; // last descript ++// tp.tx_desc->flg_status.bits_cmd_status.mode = 0; // only support XOR command ++ tp.tx_desc->flg_status.bits32 = 0x00010000; ++ tp.tx_desc->func_ctrl.bits.own = DMA; /* set owner bit */ ++ tp.tx_desc->next_desc_addr.bits32 = 0x0000000b;// end of descript ++ tp.tx_cur_desc = (RAID_DESCRIPTOR_T *)((tp.tx_desc->next_desc_addr.bits32 & 0xfffffff0)+tx_desc_virtual_base); // keep last descript ++ ++ wmb(); ++ // prepare rx descript ++ raid_write_reg(RAID_STRDMA_CURR_DESC,(unsigned int)tp.rx_desc-rx_desc_virtual_base,0xFFFFFFFf); ++ tp.rx_desc->buf_addr = (unsigned int)__pa(p1); ++ tp.rx_desc->func_ctrl.bits.buffer_size = bytes; /* total frame byte count */ ++ tp.rx_desc->flg_status.bits32 = 0; // link data from XOR ++// tp.rx_cur_desc->next_desc_addr.bits.sof_eof = 0x03; /*only one descriptor*/ ++ tp.rx_desc->func_ctrl.bits.own = DMA; /* set owner bit */ ++ tp.rx_desc->next_desc_addr.bits32 = 0x0000000b;// end of descript ++ ++ } ++ else{ ++ /* no free tx descriptor */ ++ printk("XOR:no free tx descript"); ++ return ; ++ } ++ ++ // change status ++// tp.status = RUNNING; ++ status = tp.busy = 1; ++ ++ // start tx DMA ++ rxdma_ctrl.bits.rd_start = 1; ++ // start rx DMA ++ txdma_ctrl.bits.td_start = 1; ++ ++ raid_write_reg(RAID_FCHDMA_CTRL, txdma_ctrl.bits32,0x80000000); ++ raid_write_reg(RAID_STRDMA_CTRL, rxdma_ctrl.bits32,0x80000000); ++ ++#ifdef SPIN_WAIT ++ gemini_xor_isr(2); ++#else ++ xor_queue_descriptor(); ++#endif ++ ++ tp.tx_desc->next_desc_addr.bits32 = ((unsigned long)tp.tx_first_desc - tx_desc_virtual_base + sizeof(RAID_DESCRIPTOR_T)*2) ; ++ tp.status = COMPLETE; ++// tp.rx_desc->next_desc_addr.bits32 = ((unsigned long)tp.rx_first_desc - tx_desc_virtual_base + sizeof(RAID_DESCRIPTOR_T)*1) ; ++// tp.rx_desc = tp.rx_first_desc ; ++// tp.rx_desc->func_ctrl.bits.own = DMA; ++ ++} ++ ++void ++xor_gemini_3(unsigned long bytes, unsigned long *p1, unsigned long *p2, ++ unsigned long *p3) ++{ ++ int status=0; ++ unsigned int flags; ++ ++ if(bytes > (1<<(SRAM_PAR_SIZE+11))){ ++ printk("XOR: out of SRAM partition!![0x%x]\n",(unsigned int)bytes); ++ } ++ ++ spin_lock_irqsave(&raid_lock,flags); ++ if(tp.status != COMPLETE){ ++ spin_unlock_irqrestore(&raid_lock, flags); ++ //printk("XOR yield3\n"); ++#ifdef XOR_SW_FILL_IN ++ xor_arm4regs_3(bytes,p1,p2,p3); ++ return; ++#else ++ yield(); ++#endif ++ } ++ spin_unlock_irqrestore(&raid_lock, flags); ++ tp.status = RUNNING; ++ ++ // flush the cache to memory before H/W XOR touches them ++ consistent_sync(p1, bytes, DMA_BIDIRECTIONAL); ++ consistent_sync(p2, bytes, DMA_TO_DEVICE); ++ consistent_sync(p3, bytes, DMA_TO_DEVICE); ++ ++ tp.tx_desc = tp.tx_first_desc; ++ tp.rx_desc = tp.rx_first_desc; ++ if((tp.tx_desc->func_ctrl.bits.own == CPU)/*&&(tp.rx_desc->func_ctrl.bits.own == DMA)*/){ ++ // prepare tx descript ++ raid_write_reg(RAID_FCHDMA_CURR_DESC,(unsigned int)tp.tx_desc-tx_desc_virtual_base,0xffffffff); ++ tp.tx_desc->buf_addr = (unsigned int)__pa(p1); // physical address ++ tp.tx_desc->func_ctrl.bits.buffer_size = bytes; /* total frame byte count */ ++// tp.tx_desc->flg_status.bits_cmd_status.bcc = 2; // first descript ++// tp.tx_desc->flg_status.bits_cmd_status.mode = 0; // only support XOR command ++ tp.tx_desc->flg_status.bits32 = 0x00020000; ++ tp.tx_desc->next_desc_addr.bits.sof_eof = 0x03; /*only one descriptor*/ ++ tp.tx_desc->func_ctrl.bits.own = DMA; /* set owner bit */ ++ tp.tx_cur_desc = (RAID_DESCRIPTOR_T *)((tp.tx_desc->next_desc_addr.bits32 & 0xfffffff0)+tx_desc_virtual_base); ++ ++ tp.tx_desc = tp.tx_cur_desc; ++ tp.tx_desc->buf_addr = (unsigned int)__pa(p2); // pysical address ++ tp.tx_desc->func_ctrl.bits.buffer_size = bytes; /* total frame byte count */ ++// tp.tx_desc->flg_status.bits_cmd_status.bcc = 0; // first descript ++// tp.tx_desc->flg_status.bits_cmd_status.mode = 0; // only support XOR command ++ tp.tx_desc->flg_status.bits32 = 0x0000000; ++ tp.tx_desc->next_desc_addr.bits.sof_eof = 0x03; /*only one descriptor*/ ++ tp.tx_desc->func_ctrl.bits.own = DMA; /* set owner bit */ ++ tp.tx_cur_desc = (RAID_DESCRIPTOR_T *)((tp.tx_desc->next_desc_addr.bits32 & 0xfffffff0)+tx_desc_virtual_base); ++ ++ tp.tx_desc = tp.tx_cur_desc; ++ tp.tx_desc->buf_addr = (unsigned int)__pa(p3); // pysical address ++ tp.tx_desc->func_ctrl.bits.buffer_size = bytes; /* total frame byte count */ ++// tp.tx_desc->flg_status.bits_cmd_status.bcc = 1; // last descript ++// tp.tx_desc->flg_status.bits_cmd_status.mode = 0; // only support XOR command ++ tp.tx_desc->flg_status.bits32 = 0x00010000; ++ tp.tx_desc->func_ctrl.bits.own = DMA; /* set owner bit */ ++ tp.tx_desc->next_desc_addr.bits32 = 0x0000000b;// end of descript ++ tp.tx_cur_desc = (RAID_DESCRIPTOR_T *)((tp.tx_desc->next_desc_addr.bits32 & 0xfffffff0)+tx_desc_virtual_base); // keep last descript ++ ++ // prepare rx descript ++ raid_write_reg(RAID_STRDMA_CURR_DESC,(unsigned int)tp.rx_desc-rx_desc_virtual_base,0xFFFFFFFf); ++ tp.rx_desc->buf_addr = (unsigned int)__pa(p1); ++ tp.rx_desc->func_ctrl.bits.buffer_size = bytes; /* total frame byte count */ ++ tp.rx_desc->flg_status.bits32 = 0; // link data from XOR ++// tp.rx_cur_desc->next_desc_addr.bits.sof_eof = 0x03; /*only one descriptor*/ ++ tp.rx_desc->func_ctrl.bits.own = DMA; /* set owner bit */ ++ tp.rx_desc->next_desc_addr.bits32 = 0x0000000b;// end of descript ++ ++ } ++ else{ ++ /* no free tx descriptor */ ++ printk("XOR:no free tx descript \n"); ++ return ; ++ } ++ ++ // change status ++// tp.status = RUNNING; ++ status = tp.busy = 1; ++ ++ // start tx DMA ++ rxdma_ctrl.bits.rd_start = 1; ++ // start rx DMA ++ txdma_ctrl.bits.td_start = 1; ++ wmb(); ++ raid_write_reg(RAID_FCHDMA_CTRL, txdma_ctrl.bits32,0x80000000); ++ raid_write_reg(RAID_STRDMA_CTRL, rxdma_ctrl.bits32,0x80000000); ++ ++#ifdef SPIN_WAIT ++ gemini_xor_isr(3); ++#else ++ xor_queue_descriptor(); ++#endif ++ tp.tx_desc->next_desc_addr.bits32 = ((unsigned long)tp.tx_first_desc - tx_desc_virtual_base + sizeof(RAID_DESCRIPTOR_T)*3) | 0x0B; ++ tp.status = COMPLETE; ++// tp.rx_desc->next_desc_addr.bits32 = ((unsigned long)tp.rx_first_desc - tx_desc_virtual_base + sizeof(RAID_DESCRIPTOR_T)*1) | 0x0B; ++ //tp.rx_desc = tp.rx_first_desc ; ++// tp.rx_desc->func_ctrl.bits.own = DMA; ++ ++} ++ ++void ++xor_gemini_4(unsigned long bytes, unsigned long *p1, unsigned long *p2, ++ unsigned long *p3, unsigned long *p4) ++{ ++ int status=0; ++ unsigned int flags; ++ ++ if(bytes > (1<<(SRAM_PAR_SIZE+11))){ ++ printk("XOR: out of SRAM partition!![0x%x]\n",(unsigned int)bytes); ++ } ++ ++ spin_lock_irqsave(&raid_lock,flags); ++ if(tp.status != COMPLETE){ ++ spin_unlock_irqrestore(&raid_lock, flags); ++ //printk("S\n"); ++#ifdef XOR_SW_FILL_IN ++ xor_arm4regs_4(bytes,p1,p2,p3,p4); ++ return; ++#else ++ msleep(1); ++ yield(); ++#endif ++ } ++ spin_unlock_irqrestore(&raid_lock, flags); ++ ++ tp.status = RUNNING; ++ ++ // flush the cache to memory before H/W XOR touches them ++ consistent_sync(p1, bytes, DMA_BIDIRECTIONAL); ++ consistent_sync(p2, bytes, DMA_TO_DEVICE); ++ consistent_sync(p3, bytes, DMA_TO_DEVICE); ++ consistent_sync(p4, bytes, DMA_TO_DEVICE); ++ ++ tp.tx_desc = tp.tx_first_desc; ++ tp.rx_desc = tp.rx_first_desc; ++ if((tp.tx_desc->func_ctrl.bits.own == CPU)/*&&(tp.rx_desc->func_ctrl.bits.own == DMA)*/){ ++ // prepare tx descript ++ raid_write_reg(RAID_FCHDMA_CURR_DESC,(unsigned int)tp.tx_desc-tx_desc_virtual_base,0xffffffff); ++ tp.tx_desc->buf_addr = (unsigned int)__pa(p1); // physical address ++ tp.tx_desc->func_ctrl.bits.buffer_size = bytes; /* total frame byte count */ ++// tp.tx_desc->flg_status.bits_cmd_status.bcc = 2; // first descript ++// tp.tx_desc->flg_status.bits_cmd_status.mode = 0; // only support XOR command ++ tp.tx_desc->flg_status.bits32 = 0x00020000; ++ tp.tx_desc->next_desc_addr.bits.sof_eof = 0x03; /*only one descriptor*/ ++ tp.tx_desc->func_ctrl.bits.own = DMA; /* set owner bit */ ++ tp.tx_cur_desc = (RAID_DESCRIPTOR_T *)((tp.tx_desc->next_desc_addr.bits32 & 0xfffffff0)+tx_desc_virtual_base); ++ ++ tp.tx_desc = tp.tx_cur_desc; ++ tp.tx_cur_desc->buf_addr = (unsigned int)__pa(p2); // pysical address ++ tp.tx_desc->func_ctrl.bits.buffer_size = bytes; /* total frame byte count */ ++// tp.tx_desc->flg_status.bits_cmd_status.bcc = 0; // first descript ++// tp.tx_desc->flg_status.bits_cmd_status.mode = 0; // only support XOR command ++ tp.tx_desc->flg_status.bits32 = 0x00000000; ++ tp.tx_cur_desc->next_desc_addr.bits.sof_eof = 0x03; /*only one descriptor*/ ++ tp.tx_desc->func_ctrl.bits.own = DMA; /* set owner bit */ ++ tp.tx_cur_desc = (RAID_DESCRIPTOR_T *)((tp.tx_desc->next_desc_addr.bits32 & 0xfffffff0)+tx_desc_virtual_base); ++ ++ tp.tx_desc = tp.tx_cur_desc; ++ tp.tx_desc->buf_addr = (unsigned int)__pa(p3); // pysical address ++ tp.tx_desc->func_ctrl.bits.buffer_size = bytes; /* total frame byte count */ ++// tp.tx_desc->flg_status.bits_cmd_status.bcc = 0; // first descript ++// tp.tx_desc->flg_status.bits_cmd_status.mode = 0; // only support XOR command ++ tp.tx_desc->flg_status.bits32 = 0x00000000; ++ tp.tx_desc->next_desc_addr.bits.sof_eof = 0x03; /*only one descriptor*/ ++ tp.tx_desc->func_ctrl.bits.own = DMA; /* set owner bit */ ++ tp.tx_cur_desc = (RAID_DESCRIPTOR_T *)((tp.tx_desc->next_desc_addr.bits32 & 0xfffffff0)+tx_desc_virtual_base); ++ ++ ++ tp.tx_desc = tp.tx_cur_desc; ++ tp.tx_desc->buf_addr = (unsigned int)__pa(p4); // pysical address ++ tp.tx_desc->func_ctrl.bits.buffer_size = bytes; /* total frame byte count */ ++// tp.tx_desc->flg_status.bits_cmd_status.bcc = 1; // last descript ++// tp.tx_desc->flg_status.bits_cmd_status.mode = 0; // only support XOR command ++ tp.tx_desc->flg_status.bits32 = 0x00010000; ++// tp.tx_cur_desc->next_desc_addr.bits.sof_eof = 0x03; /*only one descriptor*/ ++ tp.tx_desc->func_ctrl.bits.own = DMA; /* set owner bit */ ++ tp.tx_desc->next_desc_addr.bits32 = 0x0000000b;// end of descript ++ tp.tx_cur_desc = (RAID_DESCRIPTOR_T *)((tp.tx_desc->next_desc_addr.bits32 & 0xfffffff0)+tx_desc_virtual_base); // keep last descript ++ ++ // prepare rx descript ++ raid_write_reg(RAID_STRDMA_CURR_DESC,(unsigned int)tp.rx_desc-rx_desc_virtual_base,0xFFFFFFFF); ++ tp.rx_desc->buf_addr = (unsigned int)__pa(p1); ++ tp.rx_desc->func_ctrl.bits.buffer_size = bytes; /* total frame byte count */ ++ tp.rx_desc->flg_status.bits32 = 0; // link data from XOR ++// tp.rx_cur_desc->next_desc_addr.bits.sof_eof = 0x03; /*only one descriptor*/ ++ tp.rx_desc->func_ctrl.bits.own = DMA; /* set owner bit */ ++ tp.rx_desc->next_desc_addr.bits32 = 0x0000000b;// end of descript ++ ++ } ++ else{ ++ /* no free tx descriptor */ ++ printk("XOR:no free tx descript"); ++ return ; ++ } ++ ++ // change status ++// tp.status = RUNNING; ++ status = tp.busy = 1; ++ ++ // start tx DMA ++ rxdma_ctrl.bits.rd_start = 1; ++ // start rx DMA ++ txdma_ctrl.bits.td_start = 1; ++ wmb(); ++ raid_write_reg(RAID_FCHDMA_CTRL, txdma_ctrl.bits32,0x80000000); ++ raid_write_reg(RAID_STRDMA_CTRL, rxdma_ctrl.bits32,0x80000000); ++ ++#ifdef SPIN_WAIT ++ gemini_xor_isr(4); ++#else ++ xor_queue_descriptor(); ++#endif ++ ++ tp.tx_desc->next_desc_addr.bits32 = ((unsigned long)tp.tx_first_desc - tx_desc_virtual_base + sizeof(RAID_DESCRIPTOR_T)*4) | 0x0B; ++ tp.status = COMPLETE; ++// tp.rx_desc->next_desc_addr.bits32 = ((unsigned long)tp.rx_first_desc - tx_desc_virtual_base + sizeof(RAID_DESCRIPTOR_T)*1) | 0x0B; ++ //tp.rx_desc = tp.rx_first_desc ; ++// tp.rx_desc->func_ctrl.bits.own = DMA; ++ ++} ++ ++void ++xor_gemini_5(unsigned long bytes, unsigned long *p1, unsigned long *p2, ++ unsigned long *p3, unsigned long *p4, unsigned long *p5) ++{ ++ ++ int status=0; ++ unsigned int flags; ++ ++ ++ if(bytes > (1<<(SRAM_PAR_SIZE+11))){ ++ printk("XOR: out of SRAM partition!![0x%x]\n",(unsigned int)bytes); ++ } ++ ++ spin_lock_irqsave(&raid_lock,flags); ++ while(tp.status != COMPLETE){ ++ spin_unlock_irqrestore(&raid_lock, flags); ++ //printk("XOR yield5\n"); ++#ifdef XOR_SW_FILL_IN ++ xor_arm4regs_5(bytes,p1,p2,p3,p4,p5); ++ return; ++#else ++ msleep(1); ++ yield(); ++#endif ++ } ++ spin_unlock_irqrestore(&raid_lock, flags); ++ tp.status = RUNNING; ++ ++ // flush the cache to memory before H/W XOR touches them ++ consistent_sync(p1, bytes, DMA_BIDIRECTIONAL); ++ consistent_sync(p2, bytes, DMA_TO_DEVICE); ++ consistent_sync(p3, bytes, DMA_TO_DEVICE); ++ consistent_sync(p4, bytes, DMA_TO_DEVICE); ++ consistent_sync(p5, bytes, DMA_TO_DEVICE); ++ ++ tp.tx_desc = tp.tx_first_desc; ++ tp.rx_desc = tp.rx_first_desc; ++ if((tp.tx_desc->func_ctrl.bits.own == CPU)/*&&(tp.rx_desc->func_ctrl.bits.own == DMA)*/){ ++ // prepare tx descript ++ raid_write_reg(RAID_FCHDMA_CURR_DESC,(unsigned int)tp.tx_desc-tx_desc_virtual_base,0xffffffff); ++ tp.tx_desc->buf_addr = (unsigned int)__pa(p1); // physical address ++ tp.tx_desc->func_ctrl.bits.buffer_size = bytes; /* total frame byte count */ ++// tp.tx_desc->flg_status.bits_cmd_status.bcc = 2; // first descript ++// tp.tx_desc->flg_status.bits_cmd_status.mode = 0; // only support XOR command ++ tp.tx_desc->flg_status.bits32 = 0x00020000; ++ tp.tx_desc->next_desc_addr.bits.sof_eof = 0x03; /*only one descriptor*/ ++ wmb(); ++ tp.tx_desc->func_ctrl.bits.own = DMA; /* set owner bit */ ++ tp.tx_cur_desc = (RAID_DESCRIPTOR_T *)((tp.tx_desc->next_desc_addr.bits32 & 0xfffffff0)+tx_desc_virtual_base); ++ ++ tp.tx_desc = tp.tx_cur_desc; ++ tp.tx_desc->buf_addr = (unsigned int)__pa(p2); // pysical address ++ tp.tx_desc->func_ctrl.bits.buffer_size = bytes; /* total frame byte count */ ++// tp.tx_desc->flg_status.bits_cmd_status.bcc = 0; // first descript ++// tp.tx_desc->flg_status.bits_cmd_status.mode = 0; // only support XOR command ++ tp.tx_desc->flg_status.bits32 = 0x00000000; ++ tp.tx_desc->next_desc_addr.bits.sof_eof = 0x03; /*only one descriptor*/ ++ wmb(); ++ tp.tx_desc->func_ctrl.bits.own = DMA; /* set owner bit */ ++ tp.tx_cur_desc = (RAID_DESCRIPTOR_T *)((tp.tx_desc->next_desc_addr.bits32 & 0xfffffff0)+tx_desc_virtual_base); ++ ++ tp.tx_desc = tp.tx_cur_desc; ++ tp.tx_desc->buf_addr = (unsigned int)__pa(p3); // pysical address ++ tp.tx_desc->func_ctrl.bits.buffer_size = bytes; /* total frame byte count */ ++// tp.tx_desc->flg_status.bits_cmd_status.bcc = 0; // first descript ++// tp.tx_desc->flg_status.bits_cmd_status.mode = 0; // only support XOR command ++ tp.tx_desc->flg_status.bits32 = 0x00000000; ++ tp.tx_desc->next_desc_addr.bits.sof_eof = 0x03; /*only one descriptor*/ ++ wmb(); ++ tp.tx_desc->func_ctrl.bits.own = DMA; /* set owner bit */ ++ tp.tx_cur_desc = (RAID_DESCRIPTOR_T *)((tp.tx_desc->next_desc_addr.bits32 & 0xfffffff0)+tx_desc_virtual_base); ++ ++ tp.tx_desc = tp.tx_cur_desc; ++ tp.tx_desc->buf_addr = (unsigned int)__pa(p4); // pysical address ++ tp.tx_desc->func_ctrl.bits.buffer_size = bytes; /* total frame byte count */ ++// tp.tx_desc->flg_status.bits_cmd_status.bcc = 0; // first descript ++// tp.tx_desc->flg_status.bits_cmd_status.mode = 0; // only support XOR command ++ tp.tx_desc->flg_status.bits32 = 0x00000000; ++ tp.tx_desc->next_desc_addr.bits.sof_eof = 0x03; /*only one descriptor*/ ++ wmb(); ++ tp.tx_desc->func_ctrl.bits.own = DMA; /* set owner bit */ ++ tp.tx_cur_desc = (RAID_DESCRIPTOR_T *)((tp.tx_desc->next_desc_addr.bits32 & 0xfffffff0)+tx_desc_virtual_base); ++ ++ ++ tp.tx_desc = tp.tx_cur_desc; ++ tp.tx_desc->buf_addr = (unsigned int)__pa(p5); // pysical address ++ tp.tx_desc->func_ctrl.bits.buffer_size = bytes; /* total frame byte count */ ++// tp.tx_desc->flg_status.bits_cmd_status.bcc = 1; // last descript ++// tp.tx_desc->flg_status.bits_cmd_status.mode = 0; // only support XOR command ++// tp.tx_cur_desc->next_desc_addr.bits.sof_eof = 0x03; /*only one descriptor*/ ++ tp.tx_desc->flg_status.bits32 = 0x00010000; ++ tp.tx_desc->func_ctrl.bits.own = DMA; /* set owner bit */ ++ tp.tx_desc->next_desc_addr.bits32 = 0x0000000b;// end of descript ++ tp.tx_cur_desc = (RAID_DESCRIPTOR_T *)((tp.tx_desc->next_desc_addr.bits32 & 0xfffffff0)+tx_desc_virtual_base); ++ tp.tx_finished_desc = tp.tx_desc; // keep last descript ++ ++ // prepare rx descript ++ raid_write_reg(RAID_STRDMA_CURR_DESC,(unsigned int)tp.rx_desc-rx_desc_virtual_base,0xFFFFFFFF); ++ tp.rx_desc->buf_addr = (unsigned int)__pa(p1); ++ tp.rx_desc->func_ctrl.bits.buffer_size = bytes; /* total frame byte count */ ++ tp.rx_desc->flg_status.bits32 = 0; // link data from XOR ++// tp.rx_cur_desc->next_desc_addr.bits.sof_eof = 0x03; /*only one descriptor*/ ++ tp.rx_desc->func_ctrl.bits.own = DMA; /* set owner bit */ ++ tp.rx_desc->next_desc_addr.bits32 = 0x0000000b;// end of descript ++ ++ } ++ else{ ++ /* no free tx descriptor */ ++ printk("XOR:no free tx descript"); ++ return ; ++ } ++ ++ // change status ++// tp.status = RUNNING; ++ status = tp.busy = 1; ++ ++ // start tx DMA ++ rxdma_ctrl.bits.rd_start = 1; ++ // start rx DMA ++ txdma_ctrl.bits.td_start = 1; ++ wmb(); ++ raid_write_reg(RAID_FCHDMA_CTRL, txdma_ctrl.bits32,0x80000000); ++ raid_write_reg(RAID_STRDMA_CTRL, rxdma_ctrl.bits32,0x80000000); ++ ++#ifdef SPIN_WAIT ++ gemini_xor_isr(5); ++#else ++ xor_queue_descriptor(); ++#endif ++ ++ tp.tx_desc->next_desc_addr.bits32 = ((unsigned long)tp.tx_first_desc - tx_desc_virtual_base + sizeof(RAID_DESCRIPTOR_T)*5) | 0x0B; ++ tp.status = COMPLETE; ++// tp.rx_desc->next_desc_addr.bits32 = ((unsigned long)tp.rx_first_desc - tx_desc_virtual_base + sizeof(RAID_DESCRIPTOR_T)*1) | 0x0B; ++ //tp.rx_desc = tp.rx_first_desc ; ++// tp.rx_desc->func_ctrl.bits.own = DMA; ++ ++} ++ ++#ifdef XOR_TEST ++void ++raid_memset(unsigned int *p1, unsigned int pattern, unsigned int bytes) ++{ ++ int status=0,i; ++ ++ if(bytes > (1<<(SRAM_PAR_SIZE+11))){ ++ printk("XOR: out of SRAM partition!![0x%x]\n",(unsigned int)bytes); ++ } ++ ++ *p1 = pattern; ++ ++ // flush the cache to memory before H/W XOR touches them ++ consistent_sync(p1, bytes, DMA_BIDIRECTIONAL); ++ ++ while(tp.status != COMPLETE){ ++ DPRINTK("XOR yield\n"); ++ //schedule(); ++ yield(); ++ } ++ tp.status = RUNNING; ++ ++ tp.tx_desc = tp.tx_first_desc; ++ tp.rx_desc = tp.rx_first_desc; ++ if((tp.tx_desc->func_ctrl.bits.own == CPU)/*&&(tp.rx_desc->func_ctrl.bits.own == DMA)*/){ ++ // prepare tx descript ++ raid_write_reg(RAID_FCHDMA_CURR_DESC,(unsigned int)tp.tx_desc-tx_desc_virtual_base,0xFFFFFFFF); ++ tp.tx_desc->buf_addr = (unsigned int)__pa(p1); // physical address ++ tp.tx_desc->func_ctrl.bits.buffer_size = 4; /* total frame byte count */ ++ tp.tx_desc->flg_status.bits_cmd_status.bcc = bytes; // bytes to fill ++ tp.tx_desc->flg_status.bits_cmd_status.mode = CMD_FILL; // only support memory FILL command ++ tp.tx_desc->next_desc_addr.bits.sof_eof = 0x03; /*only one descriptor*/ ++ tp.tx_desc->func_ctrl.bits.own = DMA; /* set owner bit */ ++ tp.tx_desc->next_desc_addr.bits32 = 0x0000000b; ++// tp.tx_cur_desc = (RAID_DESCRIPTOR_T *)((tp.tx_desc->next_desc_addr.bits32 & 0xFFFFFFF0)+tx_desc_virtual_base); ++ ++ // prepare rx descript ++ raid_write_reg(RAID_STRDMA_CURR_DESC,(unsigned int)tp.rx_desc-rx_desc_virtual_base,0xFFFFFFFF); ++ tp.rx_desc->buf_addr = (unsigned int)__pa(p1); ++ tp.rx_desc->func_ctrl.bits.buffer_size = bytes; /* total frame byte count */ ++ tp.rx_desc->flg_status.bits32 = 0; // link data from XOR ++ tp.rx_cur_desc->next_desc_addr.bits.sof_eof = 0x03; /*only one descriptor*/ ++ tp.rx_desc->func_ctrl.bits.own = DMA; /* set owner bit */ ++// tp.rx_cur_desc = (RAID_DESCRIPTOR_T *)((tp.rx_cur_desc->next_desc_addr.bits32 & 0xfffffff0)+rx_desc_virtual_base); ++ tp.rx_desc->next_desc_addr.bits32 = 0x0000000b;// end of descript ++ tp.rx_finished_desc = tp.rx_desc; ++ ++ } ++ else{ ++ /* no free tx descriptor */ ++ printk("XOR:no free tx descript"); ++ return ; ++ } ++ ++ // change status ++ //tp.status = RUNNING; ++ status = tp.busy = 1; ++ ++ // start tx DMA ++ rxdma_ctrl.bits.rd_start = 1; ++ // start rx DMA ++ txdma_ctrl.bits.td_start = 1; ++ ++ raid_write_reg(RAID_FCHDMA_CTRL, txdma_ctrl.bits32,0x80000000); ++ raid_write_reg(RAID_STRDMA_CTRL, rxdma_ctrl.bits32,0x80000000); ++ ++#ifdef SPIN_WAIT ++ gemini_xor_isr(2); ++#else ++ xor_queue_descriptor(); ++#endif ++ ++ for(i=1; i<(bytes/sizeof(int)); i++) { ++ if(p1[0]!=p1[i]){ ++ printk("pattern set error!\n"); ++ while(1); ++ } ++ } ++ ++ tp.tx_desc->next_desc_addr.bits32 = ((unsigned long)tp.tx_first_desc - tx_desc_virtual_base + sizeof(RAID_DESCRIPTOR_T)*1) ; ++ tp.status = COMPLETE; ++// tp.rx_desc->next_desc_addr.bits32 = ((unsigned long)tp.rx_first_desc - tx_desc_virtual_base + sizeof(RAID_DESCRIPTOR_T)*1) ; ++ //tp.rx_desc = tp.rx_first_desc ; ++// tp.rx_desc->func_ctrl.bits.own = DMA; ++ ++} ++#endif ++ ++void ++raid_memcpy(unsigned int *to, unsigned int *from, unsigned int bytes) ++{ ++ int status=0,i; ++ ++ if(bytes > (1<<(SRAM_PAR_SIZE+11))){ ++ printk("XOR: out of SRAM partition!![0x%x]\n",(unsigned int)bytes); ++ } ++ ++ // flush the cache to memory before H/W XOR touches them ++ consistent_sync(to, bytes, DMA_BIDIRECTIONAL); ++ consistent_sync(from,bytes, DMA_TO_DEVICE); ++ ++ while(tp.status != COMPLETE){ ++ DPRINTK("XOR yield\n"); ++ //schedule(); ++ yield(); ++ } ++ tp.status = RUNNING; ++ ++ tp.tx_desc = tp.tx_first_desc; ++ tp.rx_desc = tp.rx_first_desc; ++ if((tp.tx_desc->func_ctrl.bits.own == CPU)/*&&(tp.rx_desc->func_ctrl.bits.own == DMA)*/){ ++ // prepare tx descript ++ raid_write_reg(RAID_FCHDMA_CURR_DESC,(unsigned int)tp.tx_desc-tx_desc_virtual_base,0xFFFFFFFF); ++ tp.tx_desc->buf_addr = (unsigned int)__pa(from); // physical address ++ tp.tx_desc->func_ctrl.bits.buffer_size = bytes; /* total frame byte count */ ++ tp.tx_desc->flg_status.bits32 = CMD_CPY; // only support memory FILL command ++ tp.tx_desc->next_desc_addr.bits.sof_eof = 0x03; /*only one descriptor*/ ++ tp.tx_desc->func_ctrl.bits.own = DMA; /* set owner bit */ ++ tp.tx_desc->next_desc_addr.bits32 = 0x0000000b; ++// tp.tx_cur_desc = (RAID_DESCRIPTOR_T *)((tp.tx_desc->next_desc_addr.bits32 & 0xFFFFFFF0)+tx_desc_virtual_base); ++ ++ // prepare rx descript ++ raid_write_reg(RAID_STRDMA_CURR_DESC,(unsigned int)tp.rx_desc-rx_desc_virtual_base,0xFFFFFFFF); ++ tp.rx_desc->buf_addr = (unsigned int)__pa(to); ++ tp.rx_desc->func_ctrl.bits.buffer_size = bytes; /* total frame byte count */ ++ tp.rx_desc->flg_status.bits32 = 0; // link data from XOR ++ tp.rx_cur_desc->next_desc_addr.bits.sof_eof = 0x03; /*only one descriptor*/ ++ tp.rx_desc->func_ctrl.bits.own = DMA; /* set owner bit */ ++// tp.rx_cur_desc = (RAID_DESCRIPTOR_T *)((tp.rx_cur_desc->next_desc_addr.bits32 & 0xfffffff0)+rx_desc_virtual_base); ++ tp.rx_desc->next_desc_addr.bits32 = 0x0000000b;// end of descript ++ ++ } ++ else{ ++ /* no free tx descriptor */ ++ printk("XOR:no free tx descript"); ++ return ; ++ } ++ ++ // change status ++ //tp.status = RUNNING; ++ status = tp.busy = 1; ++ ++ // start tx DMA ++ rxdma_ctrl.bits.rd_start = 1; ++ // start rx DMA ++ txdma_ctrl.bits.td_start = 1; ++ ++ raid_write_reg(RAID_FCHDMA_CTRL, txdma_ctrl.bits32,0x80000000); ++ raid_write_reg(RAID_STRDMA_CTRL, rxdma_ctrl.bits32,0x80000000); ++ ++#ifdef SPIN_WAIT ++ gemini_xor_isr(2); ++#else ++ xor_queue_descriptor(); ++#endif ++ ++#ifdef XOR_TEST ++ for(i=1; i<(bytes/sizeof(int)); i++) { ++ if(to[i]!=from[i]){ ++ printk("pattern check error!\n"); ++ printk("offset=0x%x p1=%x p2=%x\n",i*4,to[i],from[i]); ++ while(1); ++ } ++ } ++#endif ++ ++ tp.tx_desc->next_desc_addr.bits32 = ((unsigned long)tp.tx_first_desc - tx_desc_virtual_base + sizeof(RAID_DESCRIPTOR_T)*1) ; ++ tp.status = COMPLETE; ++// tp.rx_desc->next_desc_addr.bits32 = ((unsigned long)tp.rx_first_desc - tx_desc_virtual_base + sizeof(RAID_DESCRIPTOR_T)*1) ; ++ //tp.rx_desc = tp.rx_first_desc ; ++// tp.rx_desc->func_ctrl.bits.own = DMA; ++ ++} ++EXPORT_SYMBOL(raid_memcpy); ++ ++#ifdef XOR_TEST ++int ++raid_memchk(unsigned int *p1, unsigned int pattern, unsigned int bytes) ++{ ++ int status=0; ++ RAID_DMA_STATUS_T dma_status; ++ ++ if(bytes > (1<<(SRAM_PAR_SIZE+11))){ ++ printk("XOR: out of SRAM partition!![0x%x]\n",(unsigned int)bytes); ++ } ++ ++ status = ((pattern&0xFFFF)%bytes )/4; ++ p1[status] = pattern; ++ ++ while(tp.status != COMPLETE){ ++ DPRINTK("XOR yield\n"); ++ //schedule(); ++ yield(); ++ } ++ tp.status = RUNNING; ++ ++ // flush the cache to memory before H/W XOR touches them ++ consistent_sync(p1, bytes, DMA_BIDIRECTIONAL); ++ ++ tp.tx_desc = tp.tx_first_desc; ++ if((tp.tx_desc->func_ctrl.bits.own == CPU)/*&&(tp.rx_desc->func_ctrl.bits.own == DMA)*/){ ++ // prepare tx descript ++ raid_write_reg(RAID_FCHDMA_CURR_DESC,(unsigned int)tp.tx_desc-tx_desc_virtual_base,0xFFFFFFFF); ++ tp.tx_desc->buf_addr = (unsigned int)__pa(p1); // physical address ++ tp.tx_desc->func_ctrl.bits.raid_ctrl_status = 0; ++ tp.tx_desc->func_ctrl.bits.buffer_size = bytes ; /* total frame byte count */ ++ tp.tx_desc->flg_status.bits32 = CMD_CHK; // only support memory FILL command ++ tp.tx_desc->next_desc_addr.bits.sof_eof = 0x03; /*only one descriptor*/ ++ tp.tx_desc->func_ctrl.bits.own = DMA; /* set owner bit */ ++ tp.tx_desc->next_desc_addr.bits32 = 0x0000000b; ++// tp.tx_cur_desc = (RAID_DESCRIPTOR_T *)((tp.tx_desc->next_desc_addr.bits32 & 0xFFFFFFF0)+tx_desc_virtual_base); ++ ++ } ++ else{ ++ /* no free tx descriptor */ ++ printk("XOR:no free tx descript"); ++ return -1; ++ } ++ ++ // change status ++ //tp.status = RUNNING; ++ status = tp.busy = 1; ++ ++ // start tx DMA ++ txdma_ctrl.bits.td_start = 1; ++ ++ raid_write_reg(RAID_FCHDMA_CTRL, txdma_ctrl.bits32,0x80000000); ++// raid_write_reg(RAID_STRDMA_CTRL, rxdma_ctrl.bits32,0x80000000); ++ ++#ifdef SPIN_WAIT ++ gemini_xor_isr(2); ++#else ++ xor_queue_descriptor(); ++#endif ++ ++// dma_status.bits32 = raid_read_reg(RAID_DMA_STATUS); ++// if (dma_status.bits32 & (1<<15)) { ++ ++ if((tp.tx_first_desc->func_ctrl.bits.raid_ctrl_status & 0x2)) { ++ status = 1; ++// raid_write_reg(RAID_DMA_STATUS,0x00008000,0x00080000); ++ } ++ else{ ++ status = 0; ++ } ++ ++ tp.tx_desc->next_desc_addr.bits32 = ((unsigned long)tp.tx_first_desc - tx_desc_virtual_base + sizeof(RAID_DESCRIPTOR_T)*1) ; ++ tp.status = COMPLETE; ++// tp.rx_desc->func_ctrl.bits.own = DMA; ++ return status ; ++} ++#endif ++ ++int __init gemini_xor_init(void) ++{ ++ unsigned int res; ++ unsigned int *paddr1,*paddr2,*paddr3,i; ++ unsigned volatile char *charact; ++ unsigned volatile short *two_char; ++ unsigned volatile int *four_char; ++ ++ // init descript ++ res = gemini_xor_init_desc(); ++ if(res) { ++ printk("Init RAID Descript Fail!!\n"); ++ return -res; ++ } ++ ++ tp.device_name = "Gemini XOR Acceleration"; ++ ++ // request irq ++#ifndef SPIN_WAIT ++ res = request_irq(IRQ_RAID, gemini_xor_isr, SA_INTERRUPT, tp.device_name, NULL); ++#endif ++ if(res){ ++ printk(KERN_ERR "%s: unable to request IRQ %d for " ++ "HW XOR %d\n", tp.device_name, IRQ_RAID, res); ++ return -EBUSY; ++ } ++ ++#ifdef XOR_TEST ++ ++RETEST: ++ paddr1 = kmalloc(0x1000,GFP_KERNEL); ++ paddr2 = kmalloc(0x1000,GFP_KERNEL); ++ paddr3 = kmalloc(0x1000,GFP_KERNEL); ++ for(i=0;ifunc_ctrl.bits.own = CPU; ++ tp.tx_desc->func_ctrl.bits.buffer_size = 0; ++ tp.tx_desc_dma = tp.tx_desc_dma + sizeof(RAID_DESCRIPTOR_T); ++// tp.tx_desc->next_desc_addr.bits32 = (unsigned int)tp.tx_desc_dma | 0x0B; ++ tp.tx_desc->next_desc_addr.bits32 = ((unsigned int)tx_first_desc_dma | 0x0B) + i*0x10; ++ tp.tx_desc = &tp.tx_desc[1]; ++ } ++ tp.tx_desc->func_ctrl.bits.own = DMA; ++ tp.tx_desc->next_desc_addr.bits32 = (unsigned int)tx_first_desc_dma|0x0b; ++ tp.tx_desc = tp.tx_cur_desc; ++ tp.tx_desc_dma = (unsigned int*)tx_first_desc_dma; ++ tp.tx_first_desc = tp.tx_desc ; ++ ++ tp.rx_cur_desc = tp.rx_desc; /* virtual address */ ++ tp.rx_finished_desc = tp.rx_desc; /* virtual address */ ++ rx_first_desc_dma = (dma_addr_t)tp.rx_desc_dma; /* physical address */ ++ for (i = 1; i < RX_DESC_NUM; i++) { ++ tp.rx_desc->func_ctrl.bits.own = DMA; ++ tp.rx_desc->func_ctrl.bits.buffer_size = 0; ++ tp.rx_desc_dma = tp.rx_desc_dma + sizeof(RAID_DESCRIPTOR_T); ++// tp.rx_desc->next_desc_addr.bits32 = (unsigned int)tp.rx_desc_dma | 0x0B; ++ tp.rx_desc->next_desc_addr.bits32 = ((unsigned int)rx_first_desc_dma | 0x0B) + i*0x10; ++ tp.rx_desc = &tp.rx_desc[1]; ++ } ++ tp.rx_desc->func_ctrl.bits.own = DMA; ++ tp.rx_desc->next_desc_addr.bits32 = rx_first_desc_dma|0x0b; ++ tp.rx_desc = tp.rx_cur_desc; ++ tp.rx_desc_dma = (unsigned int*)rx_first_desc_dma; ++ tp.rx_first_desc = tp.rx_desc ; ++ tp.busy = 0; ++ tp.status = COMPLETE; ++ ++ // Partition SRAM size ++ raid_write_reg(RAID_PCR, SRAM_PAR_SIZE,0x00000003); ++ ++ // config tx DMA controler ++ txdma_ctrl.bits32 = 0; ++ txdma_ctrl.bits.td_start = 0; ++ txdma_ctrl.bits.td_continue = 1; ++ txdma_ctrl.bits.td_chain_mode = 1; ++ txdma_ctrl.bits.td_prot = 0; ++ txdma_ctrl.bits.td_burst_size = 1; ++ txdma_ctrl.bits.td_bus = 3; ++ txdma_ctrl.bits.td_endian = 0; ++ txdma_ctrl.bits.td_finish_en = 1; ++ txdma_ctrl.bits.td_fail_en = 1; ++ txdma_ctrl.bits.td_perr_en = 1; ++ txdma_ctrl.bits.td_eod_en = 0; // enable tx descript ++ txdma_ctrl.bits.td_eof_en = 0; ++ raid_write_reg(RAID_FCHDMA_CTRL, txdma_ctrl.bits32,0xFFFFFFFF); ++ ++ // config rx DMA controler ++ rxdma_ctrl.bits32 = 0; ++ rxdma_ctrl.bits.rd_start = 0; ++ rxdma_ctrl.bits.rd_continue = 1; ++ rxdma_ctrl.bits.rd_chain_mode = 1; ++ rxdma_ctrl.bits.rd_prot = 0; ++ rxdma_ctrl.bits.rd_burst_size = 1; ++ rxdma_ctrl.bits.rd_bus = 3; ++ rxdma_ctrl.bits.rd_endian = 0; ++ rxdma_ctrl.bits.rd_finish_en = 0; ++ rxdma_ctrl.bits.rd_fail_en = 1; ++ rxdma_ctrl.bits.rd_perr_en = 1; ++ rxdma_ctrl.bits.rd_eod_en = 0; ++ rxdma_ctrl.bits.rd_eof_en = 0; ++ raid_write_reg(RAID_STRDMA_CTRL, rxdma_ctrl.bits32,0xFFFFFFFF); ++ ++ // enable interrupt ++ dma_status.bits32 = 3; // enable RpInt ++ raid_write_reg(RAID_DMA_STATUS, dma_status.bits32,0xFFFFFFFF); ++ ++ return 0; ++} ++ ++module_init(gemini_xor_init); ++module_exit(gemini_xor_exit); ++ +--- a/arch/arm/mm/Kconfig ++++ b/arch/arm/mm/Kconfig +@@ -187,6 +187,26 @@ + Say Y if you want support for the ARM926T processor. + Otherwise, say N. + ++###### for Storlink SoC ###### ++config CPU_FA526 ++ bool "FA526 processor" ++ depends on ARCH_SL2312 ++ default y ++ select CPU_32v4 ++ select CPU_ABRT_EV4 ++ select CPU_CACHE_FA ++ select CPU_CACHE_VIVT ++ select CPU_CP15_MMU ++ select CPU_COPY_FA ++ select CPU_TLB_FA ++ select CPU_FA_BTB ++ help ++ The FA526 is a version of the ARM9 compatible processor, but with smaller ++ instruction and data caches. It is used in Storlink Sword device family. ++ ++ Say Y if you want support for the FA526 processor. ++ Otherwise, say N. ++ + # ARM940T + config CPU_ARM940T + bool "Support ARM940T processor" if ARCH_INTEGRATOR +@@ -461,6 +481,9 @@ + config CPU_CACHE_VIPT + bool + ++config CPU_CACHE_FA ++ bool ++ + if MMU + # The copy-page model + config CPU_COPY_V3 +@@ -475,6 +498,12 @@ + config CPU_COPY_V6 + bool + ++config CPU_COPY_FA ++ bool ++ ++config CPU_FA_BTB ++ bool ++ + # This selects the TLB model + config CPU_TLB_V3 + bool +@@ -534,6 +563,14 @@ + config IO_36 + bool + ++config CPU_TLB_FA ++ bool ++ help ++ //TODO ++ Faraday ARM FA526 architecture, unified TLB with writeback cache ++ and invalidate instruction cache entry. Branch target buffer is also ++ supported. ++ + comment "Processor Features" + + config ARM_THUMB +@@ -600,7 +637,7 @@ + + config CPU_DCACHE_WRITETHROUGH + bool "Force write through D-cache" +- depends on (CPU_ARM740T || CPU_ARM920T || CPU_ARM922T || CPU_ARM925T || CPU_ARM926T || CPU_ARM940T || CPU_ARM946E || CPU_ARM1020) && !CPU_DCACHE_DISABLE ++ depends on (CPU_ARM740T || CPU_ARM920T || CPU_ARM922T || CPU_ARM925T || CPU_ARM926T || CPU_ARM940T || CPU_ARM946E || CPU_ARM1020 || CPU_FA526) && !CPU_DCACHE_DISABLE + default y if CPU_ARM925T + help + Say Y here to use the data cache in writethrough mode. Unless you +--- a/arch/arm/mm/Makefile ++++ b/arch/arm/mm/Makefile +@@ -32,6 +32,7 @@ + obj-$(CONFIG_CPU_CACHE_V4WB) += cache-v4wb.o + obj-$(CONFIG_CPU_CACHE_V6) += cache-v6.o + obj-$(CONFIG_CPU_CACHE_V7) += cache-v7.o ++obj-$(CONFIG_CPU_CACHE_FA) += cache-fa.o + + obj-$(CONFIG_CPU_COPY_V3) += copypage-v3.o + obj-$(CONFIG_CPU_COPY_V4WT) += copypage-v4wt.o +@@ -40,6 +41,7 @@ + obj-$(CONFIG_CPU_SA1100) += copypage-v4mc.o + obj-$(CONFIG_CPU_XSCALE) += copypage-xscale.o + obj-$(CONFIG_CPU_XSC3) += copypage-xsc3.o ++obj-$(CONFIG_CPU_COPY_FA) += copypage-fa.o + + obj-$(CONFIG_CPU_TLB_V3) += tlb-v3.o + obj-$(CONFIG_CPU_TLB_V4WT) += tlb-v4.o +@@ -47,6 +49,7 @@ + obj-$(CONFIG_CPU_TLB_V4WBI) += tlb-v4wbi.o + obj-$(CONFIG_CPU_TLB_V6) += tlb-v6.o + obj-$(CONFIG_CPU_TLB_V7) += tlb-v7.o ++obj-$(CONFIG_CPU_TLB_FA) += tlb-fa.o + + obj-$(CONFIG_CPU_ARM610) += proc-arm6_7.o + obj-$(CONFIG_CPU_ARM710) += proc-arm6_7.o +@@ -60,6 +63,7 @@ + obj-$(CONFIG_CPU_ARM926T) += proc-arm926.o + obj-$(CONFIG_CPU_ARM940T) += proc-arm940.o + obj-$(CONFIG_CPU_ARM946E) += proc-arm946.o ++obj-$(CONFIG_CPU_FA526) += proc-fa526.o + obj-$(CONFIG_CPU_ARM1020) += proc-arm1020.o + obj-$(CONFIG_CPU_ARM1020E) += proc-arm1020e.o + obj-$(CONFIG_CPU_ARM1022) += proc-arm1022.o +--- /dev/null ++++ b/arch/arm/mm/cache-fa.S +@@ -0,0 +1,400 @@ ++/* ++ * linux/arch/arm/mm/cache-fa.S ++ * ++ * Copyright (C) 2005 Faraday Corp. ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++ * ++ * Processors: FA520 FA526 FA626 ++ * 03/31/2005 : Luke Lee created, modified from cache-v4wb.S ++ * 04/06/2005 : 1. Read CR0-1 and determine the cache size dynamically, ++ * to suit all Faraday CPU series ++ * 2. Fixed all functions ++ * 04/08/2005 : insert CONFIG_CPU_ICACHE_DISABLE and CONFIG_CPU_DCACHE_DISABLE ++ * 04/12/2005 : TODO: make this processor dependent or a self-modifying code to ++ * inline cache len/size info into the instructions, as reading cache ++ * size and len info in memory could cause another cache miss. ++ * 05/05/2005 : Modify fa_flush_user_cache_range to comply APCS. ++ * 05/19/2005 : Adjust for boundary conditions. ++ */ ++#include ++#include ++#include ++#include ++#include "proc-macros.S" ++ ++#define CACHE_DLINESIZE 16 ++#ifdef CONFIG_SL3516_ASIC ++#define CACHE_DSIZE 8192 ++#else ++#define CACHE_DSIZE 16384 ++#endif ++#define CACHE_ILINESIZE 16 ++#define CACHE_ISIZE 16384 ++ ++/* Luke Lee 04/06/2005 ins begin */ ++/* ++ * initialize_cache_info() ++ * ++ * Automatic detection of DSIZE, DLEN, ISIZE, ILEN variables according to ++ * system register CR0-1 ++ * Destroyed register: r0, r1, r2, r3, ip ++ */ ++ .align ++ENTRY(fa_initialize_cache_info) ++ mov r3, #1 @ r3 always = 1 ++ adr ip, __fa_cache_ilen ++ ++ mrc p15, 0, r0, c0, c0, 1 ++ /* ILEN */ ++ and r1, r0, #3 @ bits [1:0] ++ add r1, r1, #3 @ cache line size is at least 8 bytes (2^3) ++ mov r2, r3, lsl r1 @ r2 = 1<= limit? ++ bhs __flush_whole_cache @ flush whole D cache ++ ++ //debug_Aaron ++ bic r0, r0, #CACHE_DLINESIZE-1 ++ mcr p15, 0, r0, c7, c14, 1 @ clean and invalidate boundary D entry ++ bic r1, r1, #CACHE_DLINESIZE-1 ++ mcr p15, 0, r1, c7, c14, 1 @ clean and invalidate boundary D entry ++ ++ ++1: /* Luke Lee 04/06/2005 del 2 ins 5 */ ++ ++#ifdef CONFIG_CPU_DCACHE_WRITETHROUGH ++ mcr p15, 0, r0, c7, c6, 1 @ invalidate D entry ++#else ++ mcr p15, 0, r0, c7, c14, 1 @ clean and invalidate D entry ++#endif ++ /* Luke Lee 04/06/2005 mod 1 */ ++ add r0, r0, #CACHE_DLINESIZE ++ cmp r0, r1 ++ bls 1b @ Luke Lee 05/19/2005 ++#endif /* CONFIG_CPU_DCACHE_DISABLE */ ++ ++#ifndef CONFIG_CPU_FA_WB_DISABLE ++ tst r2, #VM_EXEC ++ /* Luke Lee 04/06/2005 mod 1 tofix todo : ne->eq */ ++ mcreq p15, 0, r4, c7, c10, 4 @ drain write buffer ++#endif ++ ++ /* Luke Lee 04/06/2005 ins block */ ++#ifdef CONFIG_CPU_FA_BTB ++ tst r2, #VM_EXEC ++ mov ip, #0 ++ mcrne p15, 0, ip, c7, c5, 6 @ invalidate BTB ++ nop ++ nop ++#endif ++ mov pc, lr ++ ++/* ++ * flush_kern_dcache_page(void *page) ++ * ++ * Ensure no D cache aliasing occurs, either with itself or ++ * the I cache ++ * ++ * - addr - page aligned address ++ */ ++ENTRY(fa_flush_kern_dcache_page) ++ add r1, r0, #PAGE_SZ ++ /* fall through */ ++ ++/* ++ * coherent_kern_range(start, end) ++ * ++ * Ensure coherency between the Icache and the Dcache in the ++ * region described by start. If you have non-snooping ++ * Harvard caches, you need to implement this function. ++ * ++ * - start - virtual start address ++ * - end - virtual end address ++ */ ++ENTRY(fa_coherent_kern_range) ++ /* fall through */ ++ ++/* ++ * coherent_user_range(start, end) ++ * ++ * Ensure coherency between the Icache and the Dcache in the ++ * region described by start. If you have non-snooping ++ * Harvard caches, you need to implement this function. ++ * ++ * - start - virtual start address ++ * - end - virtual end address ++ */ ++ENTRY(fa_coherent_user_range) ++ ++/* Luke Lee 04/06/2005 mod ok */ ++ /* Luke Lee 04/06/2005 ins 3 mod 1 */ ++ bic r0, r0, #CACHE_DLINESIZE-1 ++ ++ //debug_Aaron ++ bic r0, r0, #CACHE_DLINESIZE-1 ++ mcr p15, 0, r0, c7, c14, 1 @ clean and invalidate boundary D entry ++ bic r1, r1, #CACHE_DLINESIZE-1 ++ mcr p15, 0, r1, c7, c14, 1 @ clean and invalidate boundary D entry ++ ++#if !(defined(CONFIG_CPU_DCACHE_DISABLE) && defined(CONFIG_CPU_ICACHE_DISABLE)) ++1: /* Luke Lee 04/06/2005 del 2 ins 5 mod 1 */ ++#ifndef CONFIG_CPU_DCACHE_DISABLE ++#ifdef CONFIG_CPU_DCACHE_WRITETHROUGH ++ mcr p15, 0, r0, c7, c6, 1 @ invalidate D entry ++#else ++ mcr p15, 0, r0, c7, c14, 1 @ clean and invalidate D entry ++#endif ++#endif /* CONFIG_CPU_DCACHE_DISABLE */ ++ ++#ifndef CONFIG_CPU_ICACHE_DISABLE ++ mcr p15, 0, r0, c7, c5, 1 @ invalidate I entry ++#endif ++ add r0, r0, #CACHE_DLINESIZE ++ cmp r0, r1 ++ bls 1b @ Luke Lee 05/19/2005 blo->bls ++#endif /* !(defined(CONFIG_CPU_DCACHE_DISABLE) && defined(CONFIG_CPU_ICACHE_DISABLE)) */ ++ ++ mov ip, #0 ++#ifdef CONFIG_CPU_FA_BTB ++ mcr p15, 0, ip, c7, c5, 6 @ invalidate BTB ++ nop ++ nop ++#endif ++ ++/* Luke Lee 04/08/2005 ins 1 skp 1 ins 1 */ ++#ifndef CONFIG_CPU_FA_WB_DISABLE ++ mcr p15, 0, ip, c7, c10, 4 @ drain WB ++#endif ++ ++ mov pc, lr ++ ++/* ++ * dma_inv_range(start, end) ++ * ++ * Invalidate (discard) the specified virtual address range. ++ * May not write back any entries. If 'start' or 'end' ++ * are not cache line aligned, those lines must be written ++ * back. ++ * ++ * - start - virtual start address ++ * - end - virtual end address ++ */ ++ENTRY(fa_dma_inv_range) ++ ++/* Luke Lee 04/06/2005 mod ok */ ++ ++#ifndef CONFIG_CPU_DCACHE_DISABLE ++ ++ //debug_Aaron ++ bic r0, r0, #CACHE_DLINESIZE-1 ++ mcr p15, 0, r0, c7, c6, 1 @ invalidate boundary D entry ++ bic r1, r1, #CACHE_DLINESIZE-1 ++ mcr p15, 0, r1, c7, c6, 1 @ invalidate boundary D entry ++ ++ /* Luke Lee 04/06/2005 ins 4 mod 2 */ ++#ifndef CONFIG_CPU_DCACHE_WRITETHROUGH ++ tst r0, #CACHE_DLINESIZE -1 ++ bic r0, r0, #CACHE_DLINESIZE -1 ++ ++//debug_Aaron ++ //mcrne p15, 0, r0, c7, c10, 1 @ clean boundary D entry ++ ++ /* Luke Lee 04/06/2005 mod 1 */ ++ /* Luke Lee 05/19/2005 always clean the end-point boundary mcrne->mcr */ ++ ////tst r1, #CACHE_DLINESIZE -1 ++ //mcr p15, 0, r1, c7, c10, 1 @ clean boundary D entry ++ /* Luke Lee 04/06/2005 ins 1 */ ++#else ++ bic r0, r0, #CACHE_DLINESIZE -1 ++#endif ++ ++//debug_Aaron ++1: mcr p15, 0, r0, c7, c6, 1 @ invalidate D entry ++//1: mcr p15, 0, r0, c7, c14, 1 @ clean and invalidate D entry ++ ++ /* Luke Lee 04/06/2005 mod 1 */ ++ add r0, r0, #CACHE_DLINESIZE ++ cmp r0, r1 ++ bls 1b @ Luke Lee 05/19/2005 blo->bls ++#endif /* CONFIG_CPU_DCACHE_DISABLE */ ++ ++ /* Luke Lee 04/06/2005 ins 1 */ ++#ifndef CONFIG_CPU_FA_WB_DISABLE ++ mov r0, #0 ++ mcr p15, 0, r0, c7, c10, 4 @ drain write buffer ++#endif ++ ++ mov pc, lr ++ ++/* ++ * dma_clean_range(start, end) ++ * ++ * Clean (write back) the specified virtual address range. ++ * ++ * - start - virtual start address ++ * - end - virtual end address ++ */ ++ENTRY(fa_dma_clean_range) ++ ++/* Luke Lee 04/06/2005 mod ok */ ++#ifndef CONFIG_CPU_DCACHE_DISABLE ++ ++ //debug_Aaron ++ bic r0, r0, #CACHE_DLINESIZE-1 ++ mcr p15, 0, r0, c7, c10, 1 @ clean boundary D entry ++ bic r1, r1, #CACHE_DLINESIZE-1 ++ mcr p15, 0, r1, c7, c10, 1 @ clean boundary D entry ++ ++ /* Luke Lee 04/06/2005 ins 4 mod 2 */ ++#ifndef CONFIG_CPU_DCACHE_WRITETHROUGH ++ bic r0, r0, #CACHE_DLINESIZE - 1 ++ ++//debug_Aaron ++1: mcr p15, 0, r0, c7, c10, 1 @ clean D entry ++//1: mcr p15, 0, r0, c7, c14, 1 @ clean D entry ++ add r0, r0, #CACHE_DLINESIZE ++ cmp r0, r1 ++ bls 1b @ Luke Lee 05/19/2005 blo->bls ++ /* Luke Lee 04/06/2005 ins 2 */ ++#endif ++#endif /* CONFIG_CPU_DCACHE_DISABLE */ ++ ++#ifndef CONFIG_CPU_FA_WB_DISABLE ++ mov r0, #0 ++ mcr p15, 0, r0, c7, c10, 4 @ drain write buffer ++#endif ++ ++ mov pc, lr ++ ++/* ++ * dma_flush_range(start, end) ++ * ++ * Clean and invalidate the specified virtual address range. ++ * ++ * - start - virtual start address ++ * - end - virtual end address ++ * ++ * This is actually the same as fa_coherent_kern_range() ++ */ ++ .globl fa_dma_flush_range ++ .set fa_dma_flush_range, fa_coherent_kern_range ++ ++ __INITDATA ++ ++ .type fa_cache_fns, #object ++ENTRY(fa_cache_fns) ++ .long fa_flush_kern_cache_all ++ .long fa_flush_user_cache_all ++ .long fa_flush_user_cache_range ++ .long fa_coherent_kern_range ++ .long fa_coherent_user_range ++ .long fa_flush_kern_dcache_page ++ .long fa_dma_inv_range ++ .long fa_dma_clean_range ++ .long fa_dma_flush_range ++ .size fa_cache_fns, . - fa_cache_fns +--- /dev/null ++++ b/arch/arm/mm/copypage-fa.S +@@ -0,0 +1,106 @@ ++/* ++ * linux/arch/arm/lib/copypage-fa.S ++ * ++ * Copyright (C) 2005 Faraday Corp. ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++ * ++ * ASM optimised string functions ++ * 05/18/2005 : Luke Lee created, modified from copypage-v4wb.S ++ */ ++#include ++#include ++#include ++ ++ .text ++/* ++ * ARMv4 optimised copy_user_page for Faraday processors ++ * ++ * We flush the destination cache lines just before we write the data into the ++ * corresponding address. Since the Dcache is read-allocate, this removes the ++ * Dcache aliasing issue. The writes will be forwarded to the write buffer, ++ * and merged as appropriate. ++ * ++ * Note: We rely on all ARMv4 processors implementing the "invalidate D line" ++ * instruction. If your processor does not supply this, you have to write your ++ * own copy_user_page that does the right thing. ++ * ++ * copy_user_page(to,from,vaddr) ++ */ ++ .align 4 ++ENTRY(fa_copy_user_page) ++#ifdef CONFIG_CPU_DCACHE_WRITETHROUGH ++ /* Write through */ ++ stmfd sp!, {r4, lr} @ 2 ++ mov r2, #PAGE_SZ/32 @ 1 ++ ++ ldmia r1!, {r3, r4, ip, lr} @ 4 ++1: stmia r0!, {r3, r4, ip, lr} @ 4 ++ ldmia r1!, {r3, r4, ip, lr} @ 4+1 ++ subs r2, r2, #1 @ 1 ++ stmia r0!, {r3, r4, ip, lr} @ 4 ++ ldmneia r1!, {r3, r4, ip, lr} @ 4 ++ bne 1b @ 1 ++ ++ mcr p15, 0, r2, c7, c7, 0 @ flush ID cache ++ ldmfd sp!, {r4, pc} @ 3 ++#else ++ /* Write back */ ++ stmfd sp!, {r4, lr} @ 2 ++ mov r2, #PAGE_SZ/32 @ 1 ++ ++1: ldmia r1!, {r3, r4, ip, lr} @ 4 ++ mcr p15, 0, r0, c7, c6, 1 @ 1 invalidate D line ++ stmia r0!, {r3, r4, ip, lr} @ 4 ++ ldmia r1!, {r3, r4, ip, lr} @ 4 ++ mcr p15, 0, r0, c7, c6, 1 @ 1 invalidate D line ++ stmia r0!, {r3, r4, ip, lr} @ 4 ++ subs r2, r2, #1 @ 1 ++ bne 1b ++ mcr p15, 0, r2, c7, c10, 4 @ 1 drain WB ++ ldmfd sp!, {r4, pc} @ 3 ++#endif ++ ++/* ++ * ARMv4 optimised clear_user_page ++ * ++ * Same story as above. ++ */ ++ .align 4 ++ENTRY(fa_clear_user_page) ++ str lr, [sp, #-4]! ++ mov r1, #PAGE_SZ/32 @ 1 ++ mov r2, #0 @ 1 ++ mov r3, #0 @ 1 ++ mov ip, #0 @ 1 ++ mov lr, #0 @ 1 ++#ifdef CONFIG_CPU_DCACHE_WRITETHROUGH ++ /* Write through */ ++1: stmia r0!, {r2, r3, ip, lr} @ 4 ++ stmia r0!, {r2, r3, ip, lr} @ 4 ++ subs r1, r1, #1 @ 1 ++ bne 1b @ 1 ++ ++ mcr p15, 0, r1, c7, c7, 0 @ flush ID cache ++ ldr pc, [sp], #4 ++#else ++ /* Write back */ ++1: mcr p15, 0, r0, c7, c6, 1 @ 1 invalidate D line ++ stmia r0!, {r2, r3, ip, lr} @ 4 ++ mcr p15, 0, r0, c7, c6, 1 @ 1 invalidate D line ++ stmia r0!, {r2, r3, ip, lr} @ 4 ++ subs r1, r1, #1 @ 1 ++ bne 1b @ 1 ++ mcr p15, 0, r1, c7, c10, 4 @ 1 drain WB ++ ldr pc, [sp], #4 ++#endif ++ ++ __INITDATA ++ ++ .type fa_user_fns, #object ++ENTRY(fa_user_fns) ++ .long fa_clear_user_page ++ .long fa_copy_user_page ++ .size fa_user_fns, . - fa_user_fns +--- a/arch/arm/mm/init.c ++++ b/arch/arm/mm/init.c +@@ -23,6 +23,7 @@ + + #include + #include ++#include + + #include "mm.h" + +@@ -252,6 +253,11 @@ + initrd_end = initrd_start + phys_initrd_size; + } + #endif ++#ifdef CONFIG_GEMINI_IPI ++ printk("CPU ID:%d\n",getcpuid()); ++// reserve_bootmem_node(NODE_DATA(0), 0x400000, 0x400000); //CPU0 space ++// reserve_bootmem_node(NODE_DATA(0), SHAREADDR, SHARE_MEM_SIZE); //share memory ++#endif + + /* + * Finally, reserve any node zero regions. +--- /dev/null ++++ b/arch/arm/mm/proc-fa526.S +@@ -0,0 +1,407 @@ ++/* ++ * linux/arch/arm/mm/proc-fa526.S: MMU functions for FA526 ++ * ++ * Copyright (C) 2005 Faraday Corp. ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; either version 2 of the License, or ++ * (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA ++ * ++ * ++ * These are the low level assembler for performing cache and TLB ++ * functions on the fa526. ++ * ++ * Written by : Luke Lee ++ */ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include "proc-macros.S" ++ ++#define CACHE_DLINESIZE 16 ++ ++ .text ++/* ++ * cpu_fa526_proc_init() ++ */ ++ENTRY(cpu_fa526_proc_init) ++ /* MMU is already ON here, ICACHE, DCACHE conditionally disabled */ ++ ++ mov r0, #1 ++ nop ++ nop ++ mcr p15, 0, r0, c1, c1, 0 @ turn-on ECR ++ nop ++ nop ++ ++ mrc p15, 0, r0, c1, c0, 0 @ read ctrl register ++ ++#ifdef CONFIG_CPU_FA_BTB ++ orr r0, r0, #CR_Z ++#else ++ bic r0, r0, #CR_Z ++#endif ++#ifdef CONFIG_CPU_FA_WB_DISABLE ++ mov r1, #0 ++ mcr p15, 0, r1, c7, c10, 4 @ drain write buffer ++ nop ++ nop ++ bic r0, r0, #CR_W ++#else ++ orr r0, r0, #CR_W ++#endif ++#ifdef CONFIG_CPU_DCACHE_DISABLE ++ bic r0, r0, #CR_C ++#else ++ orr r0, r0, #CR_C ++#endif ++#ifdef CONFIG_CPU_ICACHE_DISABLE ++ bic r0, r0, #CR_I ++#else ++ orr r0, r0, #CR_I ++#endif ++ ++ nop ++ nop ++ mcr p15, 0, r0, c1, c0, 0 ++ nop ++ nop ++ ++ mov r5, lr ++ bl fa_initialize_cache_info @ destroy r0~r4 ++ mov pc, r5 @ return ++ ++ ++/* ++ * cpu_fa526_proc_fin() ++ */ ++ENTRY(cpu_fa526_proc_fin) ++ stmfd sp!, {lr} ++ mov ip, #PSR_F_BIT | PSR_I_BIT | SVC_MODE ++ msr cpsr_c, ip ++ ++ bl fa_flush_kern_cache_all ++ mrc p15, 0, r0, c1, c0, 0 @ ctrl register ++ bic r0, r0, #0x1000 @ ...i............ ++ bic r0, r0, #0x000e @ ............wca. ++ mcr p15, 0, r0, c1, c0, 0 @ disable caches ++ ++ nop ++ nop ++ ldmfd sp!, {pc} ++ ++/* ++ * cpu_fa526_reset(loc) ++ * ++ * Perform a soft reset of the system. Put the CPU into the ++ * same state as it would be if it had been reset, and branch ++ * to what would be the reset vector. ++ * ++ * loc: location to jump to for soft reset ++ */ ++ .align 4 ++ENTRY(cpu_fa526_reset) ++ mov ip, #0 ++ mcr p15, 0, ip, c7, c7, 0 @ invalidate I,D caches ++#ifndef CONFIG_CPU_FA_WB_DISABLE ++ mcr p15, 0, ip, c7, c10, 4 @ drain WB ++#endif ++ mcr p15, 0, ip, c8, c7, 0 @ invalidate I & D TLBs ++ mrc p15, 0, ip, c1, c0, 0 @ ctrl register ++ bic ip, ip, #0x000f @ ............wcam ++ bic ip, ip, #0x1100 @ ...i...s........ ++ ++ bic ip, ip, #0x0800 @ BTB off ++ mcr p15, 0, ip, c1, c0, 0 @ ctrl register ++ nop ++ nop ++ mov pc, r0 ++ ++/* ++ * cpu_fa526_do_idle() ++ */ ++ .align 4 ++ENTRY(cpu_fa526_do_idle) ++ ++#ifdef CONFIG_CPU_FA_IDLE ++ nop ++ nop ++ mcr p15, 0, r0, c7, c0, 4 @ Wait for interrupt (IDLE mode) ++#endif ++ mov pc, lr ++ ++ ++ENTRY(cpu_fa526_dcache_clean_area) ++ ++#ifndef CONFIG_CPU_DCACHE_DISABLE ++#ifndef CONFIG_CPU_DCACHE_WRITETHROUGH ++1: mcr p15, 0, r0, c7, c10, 1 @ clean D entry ++ add r0, r0, #CACHE_DLINESIZE ++ subs r1, r1, #CACHE_DLINESIZE ++ bhi 1b ++#endif ++#endif ++ mov pc, lr ++ ++ ++/* =============================== PageTable ============================== */ ++ ++/* ++ * cpu_fa526_switch_mm(pgd) ++ * ++ * Set the translation base pointer to be as described by pgd. ++ * ++ * pgd: new page tables ++ */ ++ .align 4 ++ ++ .globl fault_address ++fault_address: ++ .long 0 ++ ++ENTRY(cpu_fa526_switch_mm) ++ ++ mov ip, #0 ++#ifndef CONFIG_CPU_DCACHE_DISABLE ++#ifdef CONFIG_CPU_DCACHE_WRITETHROUGH ++ mcr p15, 0, ip, c7, c6, 0 @ invalidate D cache ++#else ++ mcr p15, 0, ip, c7, c14, 0 @ Clean and invalidate whole DCache ++#endif ++#endif /*CONFIG_CPU_DCACHE_DISABLE*/ ++ ++#ifndef CONFIG_CPU_ICACHE_DISABLE ++ mcr p15, 0, ip, c7, c5, 0 @ invalidate I cache ++#endif ++ ++#ifndef CONFIG_CPU_FA_WB_DISABLE ++ mcr p15, 0, ip, c7, c10, 4 @ drain WB ++#endif ++ ++#ifdef CONFIG_CPU_FA_BTB ++ mcr p15, 0, ip, c7, c5, 6 @ invalidate BTB since mm changed ++ nop ++ nop ++#endif ++ bic r0, r0, #0xff @ clear bits [7:0] ++ bic r0, r0, #0x3f00 @ clear bits [13:8] ++ mcr p15, 0, r0, c2, c0, 0 @ load page table pointer ++ mcr p15, 0, ip, c8, c7, 0 @ invalidate UTLB ++ nop ++ nop ++ mov pc, lr ++ ++/* ++ * cpu_fa526_set_pte_ext(ptep, pte, ext) ++ * ++ * Set a PTE and flush it out ++ */ ++ .align 4 ++ENTRY(cpu_fa526_set_pte_ext) ++ str r1, [r0], #-2048 @ linux version ++ ++ eor r1, r1, #L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_WRITE | L_PTE_DIRTY ++ ++ bic r2, r1, #PTE_SMALL_AP_MASK ++ bic r2, r2, #PTE_TYPE_MASK ++ orr r2, r2, #PTE_TYPE_SMALL ++ ++ tst r1, #L_PTE_USER @ User? ++ orrne r2, r2, #PTE_SMALL_AP_URO_SRW ++ ++ tst r1, #L_PTE_WRITE | L_PTE_DIRTY @ Write and Dirty? ++ orreq r2, r2, #PTE_SMALL_AP_UNO_SRW ++ ++ tst r1, #L_PTE_PRESENT | L_PTE_YOUNG @ Present and Young? ++ movne r2, #0 ++ ++#ifdef CONFIG_CPU_DCACHE_WRITETHROUGH ++ eor r3, r2, #0x0a @ C & small page? 1010 ++ tst r3, #0x0b @ 1011 ++ biceq r2, r2, #4 ++#endif ++ str r2, [r0] @ hardware version ++ ++ mov r2, #0 ++ mcr p15, 0, r2, c7, c10, 0 @ clean D cache all ++ ++#ifndef CONFIG_CPU_FA_WB_DISABLE ++ mcr p15, 0, r2, c7, c10, 4 @ drain WB ++#endif ++#ifdef CONFIG_CPU_FA_BTB ++ mcr p15, 0, r2, c7, c5, 6 @ invalidate BTB ++ nop ++ nop ++#endif ++ mov pc, lr ++ ++ __INIT ++ ++ .type __fa526_setup, #function ++__fa526_setup: ++ /* On return of this routine, r0 must carry correct flags for CFG register */ ++ mov r0, #0 ++ mcr p15, 0, r0, c7, c7 @ invalidate I,D caches on v4 ++ mcr p15, 0, r0, c7, c10, 4 @ drain write buffer on v4 ++ mcr p15, 0, r0, c8, c7 @ invalidate I,D TLBs on v4 ++ ++ mcr p15, 0, r0, c7, c5, 5 @ invalidate IScratchpad RAM ++ ++ mov r0, #1 ++ mcr p15, 0, r0, c1, c1, 0 @ turn-on ECR ++ ++ mrc p15, 0, r0, c9, c1, 0 @ DScratchpad ++ bic r0, r0, #1 ++ mcr p15, 0, r0, c9, c1, 0 ++ mrc p15, 0, r0, c9, c1, 1 @ IScratchpad ++ bic r0, r0, #1 ++ mcr p15, 0, r0, c9, c1, 1 ++ ++ mov r0, #0 ++ mcr p15, 0, r0, c1, c1, 0 @ turn-off ECR ++ ++#ifdef CONFIG_CPU_FA_BTB ++ mcr p15, 0, r0, c7, c5, 6 @ invalidate BTB All ++ nop ++ nop ++#endif ++ ++ mov r0, #0x1f @ Domains 0, 1 = manager, 2 = client ++ mcr p15, 0, r0, c3, c0 @ load domain access register ++ ++ mrc p15, 0, r0, c1, c0 @ get control register v4 ++ ldr r5, fa526_cr1_clear ++ bic r0, r0, r5 ++ ldr r5, fa526_cr1_set ++ orr r0, r0, r5 ++ ++#ifdef CONFIG_CPU_FA_BTB ++ orr r0, r0, #CR_Z ++#else ++ bic r0, r0, #CR_Z ++#endif ++#ifdef CONFIG_CPU_FA_WB_DISABLE ++ mov r12, #0 ++ mcr p15, 0, r12, c7, c10, 4 @ drain write buffer ++ nop ++ nop ++ bic r0, r0, #CR_W @ .... .... .... 1... ++#else ++ orr r0, r0, #CR_W ++#endif ++ ++ mov pc, lr ++ .size __fa526_setup, . - __fa526_setup ++ ++ /* ++ * .RVI ZFRS BLDP WCAM ++ * ..11 0001 .111 1101 ++ * ++ */ ++ .type fa526_cr1_clear, #object ++ .type fa526_cr1_set, #object ++fa526_cr1_clear: ++ .word 0x3f3f ++fa526_cr1_set: ++ .word 0x317D ++ ++ __INITDATA ++ ++/* ++ * Purpose : Function pointers used to access above functions - all calls ++ * come through these ++ */ ++ .type fa526_processor_functions, #object ++fa526_processor_functions: ++ .word v4_early_abort ++ .word cpu_fa526_proc_init ++ .word cpu_fa526_proc_fin ++ .word cpu_fa526_reset ++ .word cpu_fa526_do_idle ++ .word cpu_fa526_dcache_clean_area ++ .word cpu_fa526_switch_mm ++ .word cpu_fa526_set_pte_ext ++ .size fa526_processor_functions, . - fa526_processor_functions ++ ++ .section ".rodata" ++ ++ .type cpu_arch_name, #object ++cpu_arch_name: ++ .asciz "armv4" ++ .size cpu_arch_name, . - cpu_arch_name ++ ++ .type cpu_elf_name, #object ++cpu_elf_name: ++ .asciz "v4" ++ .size cpu_elf_name, . - cpu_elf_name ++ ++ .type cpu_fa526_name, #object ++cpu_fa526_name: ++ .ascii "FA526" ++#ifndef CONFIG_CPU_ICACHE_DISABLE ++ .ascii "i" ++#endif ++#ifndef CONFIG_CPU_DCACHE_DISABLE ++ .ascii "d" ++#ifdef CONFIG_CPU_DCACHE_WRITETHROUGH ++ .ascii "(wt)" ++#else ++ .ascii "(wb)" ++#endif ++#endif ++ .ascii "\0" ++ .size cpu_fa526_name, . - cpu_fa526_name ++ ++ .align ++ ++ .section ".proc.info.init", #alloc, #execinstr ++ ++#ifdef CONFIG_CPU_DCACHE_WRITETHROUGH ++#define __PMD_SECT_BUFFERABLE 0 ++#else ++#define __PMD_SECT_BUFFERABLE PMD_SECT_BUFFERABLE ++#endif ++ ++ .type __fa526_proc_info,#object ++__fa526_proc_info: ++ .long 0x66015261 ++ .long 0xff01fff1 ++ .long PMD_TYPE_SECT | \ ++ __PMD_SECT_BUFFERABLE | \ ++ PMD_SECT_CACHEABLE | \ ++ PMD_BIT4 | \ ++ PMD_SECT_AP_WRITE | \ ++ PMD_SECT_AP_READ ++ .long PMD_TYPE_SECT | \ ++ PMD_BIT4 | \ ++ PMD_SECT_AP_WRITE | \ ++ PMD_SECT_AP_READ ++ b __fa526_setup ++ .long cpu_arch_name ++ .long cpu_elf_name ++ .long HWCAP_SWP | HWCAP_HALF ++ .long cpu_fa526_name ++ .long fa526_processor_functions ++ .long fa_tlb_fns ++ .long fa_user_fns ++ .long fa_cache_fns ++ .size __fa526_proc_info, . - __fa526_proc_info ++ ++ +--- /dev/null ++++ b/arch/arm/mm/tlb-fa.S +@@ -0,0 +1,96 @@ ++/* ++ * linux/arch/arm/mm/tlb-fa.S ++ * ++ * Copyright (C) 2005 Faraday Corp. ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++ * ++ * ARM architecture version 4, Faraday variation. ++ * This assume an unified TLBs, with a write buffer, and branch target buffer (BTB) ++ * ++ * Processors: FA520 FA526 FA626 ++ * 03/31/2005 : Created by Luke Lee, modified from tlb-v4wbi.S ++ * 05/06/2005 : Fixed buggy CPU versions that did not invalidate the associated ++ * data cache entries when invalidating TLB entries. ++ */ ++#include ++#include ++#include ++#include ++#include "proc-macros.S" ++ ++ ++/* ++ * flush_user_tlb_range(start, end, mm) ++ * ++ * Invalidate a range of TLB entries in the specified address space. ++ * ++ * - start - range start address ++ * - end - range end address ++ * - mm - mm_struct describing address space ++ */ ++ .align 4 ++ENTRY(fa_flush_user_tlb_range) ++ ++ vma_vm_mm ip, r2 ++ act_mm r3 @ get current->active_mm ++ eors r3, ip, r3 @ == mm ? ++ movne pc, lr @ no, we dont do anything ++ mov r3, #0 ++ ++#ifndef CONFIG_CPU_FA_WB_DISABLE ++ mcr p15, 0, r3, c7, c10, 4 @ drain WB ++#endif ++ ++ vma_vm_flags r2, r2 ++ bic r0, r0, #0x0ff ++ bic r0, r0, #0xf00 ++ ++1: mcr p15, 0, r0, c8, c7, 1 @ invalidate UTLB entry ++ add r0, r0, #PAGE_SZ ++ cmp r0, r1 ++ bls 1b @ Luke Lee 05/19/2005 blo -> bls ++ ++#ifdef CONFIG_CPU_FA_BTB ++ mcr p15, 0, r3, c7, c5, 6 @ invalidate BTB ++ nop ++ nop ++#endif ++ mov pc, lr ++ ++ ++ENTRY(fa_flush_kern_tlb_range) ++ mov r3, #0 ++ ++ mcr p15, 0, r3, c7, c10, 0 @ clean Dcache all 06/03/2005 ++ ++#ifndef CONFIG_CPU_FA_WB_DISABLE ++ mcr p15, 0, r3, c7, c10, 4 @ drain WB ++#endif ++ ++ bic r0, r0, #0x0ff ++ bic r0, r0, #0xf00 ++1: ++ mcr p15, 0, r0, c8, c7, 1 @ invalidate UTLB entry ++ add r0, r0, #PAGE_SZ ++ cmp r0, r1 ++ bls 1b @ Luke Lee 05/19/2005 blo -> bls ++ ++#ifdef CONFIG_CPU_FA_BTB ++ mcr p15, 0, r3, c7, c5, 6 @ invalidate BTB ++ nop ++ nop ++#endif ++ mov pc, lr ++ ++ ++ __INITDATA ++ ++ .type fa_tlb_fns, #object ++ENTRY(fa_tlb_fns) ++ .long fa_flush_user_tlb_range ++ .long fa_flush_kern_tlb_range ++ .long fa_tlb_flags ++ .size fa_tlb_fns, . - fa_tlb_fns +--- a/arch/arm/tools/mach-types ++++ b/arch/arm/tools/mach-types +@@ -208,7 +208,8 @@ + fester SA1100_FESTER FESTER 191 + gpi ARCH_GPI GPI 192 + smdk2410 ARCH_SMDK2410 SMDK2410 193 +-i519 ARCH_I519 I519 194 ++#i519 ARCH_I519 I519 194 ++sl2312 ARCH_SL2312 SL2312 194 + nexio SA1100_NEXIO NEXIO 195 + bitbox SA1100_BITBOX BITBOX 196 + g200 SA1100_G200 G200 197 +--- /dev/null ++++ b/include/asm-arm/arch-sl2312/SL_gpio.h +@@ -0,0 +1,59 @@ ++#define GPIO_MINOR_LAST 31 ++#define GPIO_MAJOR 120 // Experiemental ++ ++#define GPIO_IRQ_NBR 12 ++ ++#define GPIOBASEADDR (IO_ADDRESS(0x021000000)) ++ ++#define GPIODATAOUTOFF 0x00 ++#define GPIODATAINOFF 0x04 ++#define GPIOPINDIROFF 0x08 ++#define GPIOPINBYPASSOFF 0x0C ++#define GPIODATASETOFF 0x10 ++#define GPIODATACLEAROFF 0x14 ++#define GPIOPINPULLENBOFF 0x18 ++#define GPIOPINPULLTPOFF 0x1C ++#define GPIOINTRENBOFF 0x20 ++#define GPIOINTRRAWSOFF 0x24 ++#define GPIOINTRMASKEDSTATEOFF 0x28 ++#define GPIOINTRMASKOFF 0x2C ++#define GPIOINTRCLEAROFF 0x30 ++#define GPIOINTRTRIGGEROFF 0x34 ++#define GPIOINTRBOTHOFF 0x38 ++#define GPIOINTRRISENEGOFF 0x3C ++#define GPIOBNCEENBOFF 0x40 ++#define GPIOBNCEPRESOFF 0x44 ++ ++#define GPIO_IOCTRL_SETDIR 0x20 ++#define GPIO_IOCTRL_SET 0x40 ++#define GPIO_IOCTRL_CLEAR 0x50 ++#define GPIO_IOCTRL_ENBINT 0x60 ++#define GPIO_IOCTRL_MASKINT 0x70 ++#define GPIO_IOCTRL_LVLTRIG 0x75 ++#define GPIO_IOCTRL_EDGINT 0x77 ++#define GPIO_IOCTRL_EDGPOLINT 0x78 ++#define GPIO_IOCTRL_BYPASS 0x30 ++#define GPIO_IOCTRL_PRESCLK 0x80 ++#define GPIO_IOCTRL_CLKVAL 0x90 ++#define GPIO_IOCTRL_PULLENB 0xA0 ++#define GPIO_IOCTRL_PULLTYPE 0xA8 ++ ++ ++#define GPIO_MAJOR 120 /* experimental MAJOR number */ ++ // Minor - 0 : 31 gpio pins ++ ++#define GPIO_SET 0x01 ++#define GPIO_CLEAR 0x01 ++ ++#define GPIO_INPUT 0 ++#define GPIO_OUTPUT 1 ++#define GPIO_EDGEINTR 0 ++#define GPIO_EDGESINGL 0 ++#define GPIO_EDGEBOTH 1 ++#define GPIO_POSITIVE 0 ++#define GPIO_ENBINT 1 ++#define GPIO_DISABLEMASK 1 ++#define GPIO_PULLDOWN 0 ++#define GPIO_PULLUP 1 ++#define GPIO_ENABLEPULL 1 ++#define GPIO_DISABLEPULL 0 +--- /dev/null ++++ b/include/asm-arm/arch-sl2312/debug-macro.S +@@ -0,0 +1,20 @@ ++/* linux/include/asm-arm/arch-ebsa110/debug-macro.S ++ * ++ * Debugging macro include header ++ * ++ * Copyright (C) 1994-1999 Russell King ++ * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++ * ++**/ ++ ++ .macro addruart,rx ++ mov \rx, #0x42000000 ++ .endm ++ ++#define UART_SHIFT 2 ++#define FLOW_CONTROL ++#include +--- /dev/null ++++ b/include/asm-arm/arch-sl2312/dma.h +@@ -0,0 +1,28 @@ ++/* ++ * linux/include/asm-arm/arch-camelot/dma.h ++ * ++ * Copyright (C) 1997,1998 Russell King ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; either version 2 of the License, or ++ * (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA ++ */ ++#ifndef __ASM_ARCH_DMA_H ++#define __ASM_ARCH_DMA_H ++ ++#define MAX_DMA_ADDRESS 0xffffffff ++ ++#define MAX_DMA_CHANNELS 0 ++ ++#endif /* _ASM_ARCH_DMA_H */ ++ +--- /dev/null ++++ b/include/asm-arm/arch-sl2312/entry-macro.S +@@ -0,0 +1,42 @@ ++/* ++ * include/asm-arm/arch-arm/entry-macro.S ++ * ++ * Low-level IRQ helper macros for ebsa110 platform. ++ * ++ * This file is licensed under the terms of the GNU General Public ++ * License version 2. This program is licensed "as is" without any ++ * warranty of any kind, whether express or implied. ++ */ ++#include ++#include ++ ++ ++ .macro disable_fiq ++ .endm ++ ++ .macro get_irqnr_preamble, base, tmp ++ .endm ++ ++ .macro arch_ret_to_user, tmp1, tmp2 ++ .endm ++ ++ .macro get_irqnr_and_base, irqnr, irqstat, base, tmp ++ ldr \irqstat, =IRQ_STATUS(IO_ADDRESS(SL2312_INTERRUPT_BASE)) ++ ldr \irqnr,[\irqstat] ++ cmp \irqnr,#0 ++ beq 2313f ++ mov \tmp,\irqnr ++ mov \irqnr,#0 ++2312: ++ tst \tmp, #1 ++ bne 2313f ++ add \irqnr, \irqnr, #1 ++ mov \tmp, \tmp, lsr #1 ++ cmp \irqnr, #31 ++ bcc 2312b ++2313: ++ .endm ++ ++ .macro irq_prio_table ++ .endm ++ +--- /dev/null ++++ b/include/asm-arm/arch-sl2312/flash.h +@@ -0,0 +1,83 @@ ++#ifndef __ASM_ARM_ARCH_FLASH_H ++#define __ASM_ARM_ARCH_FLASH_H ++ ++#define FLASH_START SL2312_FLASH_BASE ++#define SFLASH_SIZE 0x00400000 ++#define SPAGE_SIZE 0x200 ++#define BLOCK_ERASE 0x50 ++#define BUFFER1_READ 0x54 ++#define BUFFER2_READ 0x56 ++#define PAGE_ERASE 0x81 ++#define MAIN_MEMORY_PAGE_READ 0x52 ++#define MAIN_MEMORY_PROGRAM_BUFFER1 0x82 ++#define MAIN_MEMORY_PROGRAM_BUFFER2 0x85 ++#define BUFFER1_TO_MAIN_MEMORY 0x83 ++#define BUFFER2_TO_MAIN_MEMORY 0x86 ++#define MAIN_MEMORY_TO_BUFFER1 0x53 ++#define MAIN_MEMORY_TO_BUFFER2 0x55 ++#define BUFFER1_WRITE 0x84 ++#define BUFFER2_WRITE 0x87 ++#define AUTO_PAGE_REWRITE_BUFFER1 0x58 ++#define AUTO_PAGE_REWRITE_BUFFER2 0x59 ++#define READ_STATUS 0x57 ++ ++#define MAIN_MEMORY_PAGE_READ_SPI 0xD2 ++#define BUFFER1_READ_SPI 0xD4 ++#define BUFFER2_READ_SPI 0xD6 ++#define READ_STATUS_SPI 0xD7 ++ ++#define FLASH_ACCESS_OFFSET 0x00000010 ++#define FLASH_ADDRESS_OFFSET 0x00000014 ++#define FLASH_WRITE_DATA_OFFSET 0x00000018 ++#define FLASH_READ_DATA_OFFSET 0x00000018 ++#define SERIAL_FLASH_CHIP1_EN 0x00010000 // 16th bit = 1 ++#define SERIAL_FLASH_CHIP0_EN 0x00000000 // 16th bit = 0 ++#define AT45DB321_PAGE_SHIFT 0xa ++#define AT45DB642_PAGE_SHIFT 0xb ++#define CONTINUOUS_MODE 0x00008000 ++ ++#define FLASH_ACCESS_ACTION_OPCODE 0x0000 ++#define FLASH_ACCESS_ACTION_OPCODE_DATA 0x0100 ++#define FLASH_ACCESS_ACTION_SHIFT_ADDRESS 0x0200 ++#define FLASH_ACCESS_ACTION_SHIFT_ADDRESS_DATA 0x0300 ++#define FLASH_ACCESS_ACTION_SHIFT_ADDRESS_X_DATA 0x0400 ++#define FLASH_ACCESS_ACTION_SHIFT_ADDRESS_2X_DATA 0x0500 ++#define FLASH_ACCESS_ACTION_SHIFT_ADDRESS_3X_DATA 0x0600 ++#define FLASH_ACCESS_ACTION_SHIFT_ADDRESS_4X_DATA 0x0700 ++//#define FLASH_ACCESS_ACTION_SHIFT_ADDRESS_X_DATA 0x0600 ++//#define FLASH_ACCESS_ACTION_SHIFT_ADDRESS_4X_DATA 0x0700 ++ ++#define M25P80_PAGE_SIZE 0x100 ++#define M25P80_SECTOR_SIZE 0x10000 ++ ++ ++//#define M25P80_BULK_ERASE 1 ++//#define M25P80_SECTOR_ERASE 2 ++//#define M25P80_SECTOR_SIZE 0x10000 ++ ++#define M25P80_WRITE_ENABLE 0x06 ++#define M25P80_WRITE_DISABLE 0x04 ++#define M25P80_READ_STATUS 0x05 ++#define M25P80_WRITE_STATUS 0x01 ++#define M25P80_READ 0x03 ++#define M25P80_FAST_READ 0x0B ++#define M25P80_PAGE_PROGRAM 0x02 ++#define M25P80_SECTOR_ERASE 0xD8 ++#define M25P80_BULK_ERASE 0xC7 ++#define FLASH_ERR_OK 0x0 ++ ++extern void address_to_page(__u32, __u16 *, __u16 *); ++extern void main_memory_page_read(__u8, __u16, __u16, __u8 *); ++extern void buffer_to_main_memory(__u8, __u16); ++extern void main_memory_to_buffer(__u8, __u16); ++extern void main_memory_page_program(__u8, __u16, __u16, __u8); ++extern void atmel_flash_read_page(__u32, __u8 *, __u32); ++extern void atmel_erase_page(__u8, __u16); ++extern void atmel_read_status(__u8, __u8 *); ++extern void atmel_flash_program_page(__u32, __u8 *, __u32); ++extern void atmel_buffer_write(__u8, __u16, __u8); ++extern void flash_delay(void); ++ ++extern int m25p80_sector_erase(__u32 address, __u32 schip_en); ++ ++#endif +--- /dev/null ++++ b/include/asm-arm/arch-sl2312/gemini_cir.h +@@ -0,0 +1,102 @@ ++#ifndef _ASM_ARCH_CIR_H ++#define _ASM_ARCH_CIR_H ++#include ++ ++#define VCR_KEY_POWER 0x613E609F ++#define TV1_KEY_POWER 0x40040100 ++#define TV1_KEY_POWER_EXT 0xBCBD ++#define RC5_KER_POWER 0x0CF3 ++ ++#define VCC_H_ACT_PER (16-1) ++#define VCC_L_ACT_PER (8-1) ++#define VCC_DATA_LEN (32-1) ++#define TV1_H_ACT_PER (8-1) ++#define TV1_L_ACT_PER (4-1) ++#define TV1_DATA_LEN (48-1) ++ ++#define VCC_BAUD 540 ++#define TV1_BAUD 430 ++#ifdef CONFIG_SL3516_ASIC ++#define EXT_CLK 60 ++#else ++#define EXT_CLK 20 ++#endif ++ ++#define NEC_PROTOCOL 0x0 ++#define RC5_PROTOCOL 0x1 ++#define VCC_PROTOCOL 0x0 ++#define TV1_PROTOCOL 0x01 ++ ++#ifndef SL2312_CIR_BASE ++#define SL2312_CIR_BASE 0x4C000000 ++#endif ++#define CIR_BASE_ADDR IO_ADDRESS(SL2312_CIR_BASE) ++#define STORLINK_CIR_ID 0x00010400 ++ ++#define CIR_IP_ID *(volatile unsigned int *)(CIR_BASE_ADDR + 0x00) ++#define CIR_CTR_REG *(volatile unsigned int *)(CIR_BASE_ADDR + 0x04) ++#define CIR_STATUS_REG *(volatile unsigned int *)(CIR_BASE_ADDR + 0x08) ++#define CIR_RX_REG *(volatile unsigned int *)(CIR_BASE_ADDR + 0x0C) ++#define CIR_RX_EXT_REG *(volatile unsigned int *)(CIR_BASE_ADDR + 0x10) ++#define CIR_PWR_REG *(volatile unsigned int *)(CIR_BASE_ADDR + 0x14) ++#define CIR_PWR_EXT_REG *(volatile unsigned int *)(CIR_BASE_ADDR + 0x18) ++#define CIR_TX_CTR_REG *(volatile unsigned int *)(CIR_BASE_ADDR + 0x1C) ++#define CIR_TX_FEQ_REG *(volatile unsigned int *)(CIR_BASE_ADDR + 0x20) ++#define CIR_TX_REG *(volatile unsigned int *)(CIR_BASE_ADDR + 0x24) ++#define CIR_TX_EXT_REG *(volatile unsigned int *)(CIR_BASE_ADDR + 0x28) ++ ++ ++#ifndef SL2312_POWER_CTRL_BASE ++#define SL2312_POWER_CTRL_BASE 0x4B000000 ++#endif ++ ++#ifndef PWR_BASE_ADDR ++#define PWR_BASE_ADDR IO_ADDRESS(SL2312_POWER_CTRL_BASE) ++#endif ++#define PWR_CTRL_ID *(unsigned int*)(PWR_BASE_ADDR+0x00) ++#define PWR_CTRL_REG *(unsigned int*)(PWR_BASE_ADDR+0x04) ++#define PWR_STATUS_REG *(unsigned int*)(PWR_BASE_ADDR+0x08) ++ ++ ++#define BIT(x) (1< ++ * ++ * Copyright 2005 Storlink Inc. ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License as published by the ++ * Free Software Foundation; either version 2 of the License, or (at your ++ * option) any later version. ++ * ++ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED ++ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF ++ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN ++ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, ++ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT ++ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF ++ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ++ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT ++ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF ++ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. ++ * ++ * You should have received a copy of the GNU General Public License along ++ * with this program; if not, write to the Free Software Foundation, Inc., ++ * 675 Mass Ave, Cambridge, MA 02139, USA. ++ */ ++ ++#ifndef __GEMINI_GPIO_H ++#define __GEMINI_GPIO_H ++ ++#include ++ ++#define STATUS_HIGH 1 ++#define STATUS_LOW 0 ++#define DIRECT_OUT 1 ++#define DIRECT_IN 0 ++ ++#define EDGE_TRIG 0 ++#define RISING_EDGE 0 ++#define FALL_EDGE 1 ++#define SINGLE_EDGE 0 ++#define BOTH_EDGE 1 ++ ++#define LEVEL_TRIG 1 ++#define HIGH_ACTIVE 0 ++#define LOW_ACTIVE 1 ++ ++struct gemini_gpio_ioctl_data { ++ __u32 pin; ++ __u8 status; // status or pin direction ++ // 0: status low or Input ++ // 1: status high or Output ++ ++ /* these member are used to config GPIO interrupt parameter */ ++ __u8 use_default; // if not sure ,set this argument 1 ++ __u8 trig_type; // 0/1:edge/level triger ? ++ __u8 trig_polar; // 0/1:rising/falling high/low active ? ++ __u8 trig_both; // 0/1:single/both detect both ? ++}; ++ ++#define GEMINI_GPIO_IOCTL_BASE 'Z' ++ ++#define GEMINI_SET_GPIO_PIN_DIR _IOW (GEMINI_GPIO_IOCTL_BASE,16, struct gemini_gpio_ioctl_data) ++#define GEMINI_SET_GPIO_PIN_STATUS _IOW (GEMINI_GPIO_IOCTL_BASE,17, struct gemini_gpio_ioctl_data) ++#define GEMINI_GET_GPIO_PIN_STATUS _IOWR(GEMINI_GPIO_IOCTL_BASE,18, struct gemini_gpio_ioctl_data) ++#define GEMINI_WAIT_GPIO_PIN_INT _IOWR(GEMINI_GPIO_IOCTL_BASE,19, struct gemini_gpio_ioctl_data) ++ ++ ++extern void init_gpio_int(__u32 pin,__u8 trig_type,__u8 trig_polar,__u8 trig_both); ++extern int request_gpio_irq(int bit,void (*handler)(int),char level,char high,char both); ++extern int free_gpio_irq(int bit); ++#endif +--- /dev/null ++++ b/include/asm-arm/arch-sl2312/gemini_i2s.h +@@ -0,0 +1,169 @@ ++#ifndef __GEMINI_I2S_H__ ++#define __GEMINI_I2S_H__ ++#include ++#include ++#include ++ ++typedef __u16 UINT16; ++typedef __u32 UINT32; ++typedef __u8 UINT8; ++typedef __u8 BOOL; ++ ++/***************************************/ ++/* define GPIO module base address */ ++/***************************************/ ++#define DMA_CONTROL_PHY_BASE (IO_ADDRESS(SL2312_GENERAL_DMA_BASE)) ++#define DMA_CONTROL_SSP_BASE (IO_ADDRESS(SL2312_SSP_CTRL_BASE)) ++#define SSP_INT IRQ_SSP ++#define GPIO_BASE_ADDR (IO_ADDRESS(SL2312_GPIO_BASE)) ++#define GPIO_BASE_ADDR1 (IO_ADDRESS(SL2312_GPIO_BASE1)) ++#define GLOBAL_BASE (IO_ADDRESS(SL2312_GLOBAL_BASE)) ++ ++/* define read/write register utility */ ++#define READ_SSP_REG(offset) (__raw_readl(offset+DMA_CONTROL_SSP_BASE)) ++#define WRITE_SSP_REG(offset,val) (__raw_writel(val,offset+DMA_CONTROL_SSP_BASE)) ++ ++#define READ_GPIO_REG(offset) (__raw_readl(offset+GPIO_BASE_ADDR)) ++#define WRITE_GPIO_REG(offset,val) (__raw_writel(val,offset+GPIO_BASE_ADDR)) ++ ++#define READ_GPIO1_REG(offset) (__raw_readl(offset+GPIO_BASE_ADDR1)) ++#define WRITE_GPIO1_REG(offset,val) (__raw_writel(val,offset+GPIO_BASE_ADDR1)) ++ ++#define READ_DMA_REG(offset) (__raw_readl(offset+DMA_CONTROL_PHY_BASE)) ++#define WRITE_DMA_REG(offset,val) (__raw_writel(val,offset+DMA_CONTROL_PHY_BASE)) ++ ++#define READ_GLOBAL_REG(offset) (__raw_readl(offset+GLOBAL_BASE)) ++#define WRITE_GLOBAL_REG(offset,val) (__raw_writel(val,offset+GLOBAL_BASE)) ++ ++#define SSP_GPIO_INT IRQ_GPIO ++ ++#ifndef CONFIG_SL3516_ASIC ++#define SSP_GPIO_INT_BIT 0x00000400 //GPIO[10] : SLIC interrupt pin ++ ++#define GPIO_EECK 0x00000040 /* SCK: GPIO[06] */ ++#define GPIO_EECS 0x00000080 /* SCS: GPIO[07] */ ++#define GPIO_MISO 0x00000200 /* SDO: GPIO[09] receive from 6996*/ ++#define GPIO_MOSI 0x00000100 /* SDI: GPIO[08] send to 6996*/ ++#define GPIO_MISO_BIT 9 ++#else ++#define SSP_GPIO_INT_BIT 0x00000001 //GPIO[0] : SLIC interrupt pin ++ ++//#if 0 ++//#define GPIO_EECK 0x80000000 /* SCK: GPIO1[31] */ ++//#define GPIO_EECS 0x40000000 /* SCS: GPIO1[30] */ ++//#define GPIO_MISO 0x20000000 /* SDO: GPIO1[29] receive from 6996*/ ++//#define GPIO_MOSI 0x10000000 /* SDI: GPIO1[28] send to 6996*/ ++//#define GPIO_MISO_BIT 29 ++//#else ++//#define GPIO_EECK 0x00000100 /* SCK: GPIO1[08] */ ++//#define GPIO_EECS 0x08000000 /* SCS: GPIO1[27] */ ++//#define GPIO_MISO 0x00000080 /* SDO: GPIO1[07] receive from 6996*/ ++//#define GPIO_MOSI 0x00000200 /* SDI: GPIO1[09] send to 6996*/ ++//#define GPIO_MISO_BIT 7 ++//#endif ++#endif ++ ++ ++enum GPIO_REG ++{ ++ GPIO_DATA_OUT = 0x00, ++ GPIO_DATA_IN = 0x04, ++ GPIO_PIN_DIR = 0x08, ++ GPIO_BY_PASS = 0x0c, ++ GPIO_DATA_SET = 0x10, ++ GPIO_DATA_CLEAR = 0x14, ++ GPIO_INT_ENABLE = 0x20, ++ GPIO_INT_RAWSTATE = 0x24, ++ GPIO_INT_MASKSTATE = 0x28, ++ GPIO_INT_MASK = 0x2C, ++ GPIO_INT_CLEAR = 0x30, ++ GPIO_INT_TRIGGER = 0x34, ++ GPIO_INT_BOTH = 0x38, ++ GPIO_INT_POLARITY = 0x3C ++}; ++ ++typedef struct ++{ ++ UINT32 src_addr; ++ UINT32 dst_addr; ++ UINT32 llp; ++ UINT32 ctrl_size; ++ UINT32 owner; ++}DMA_LLP_t; ++ ++typedef struct ++{ ++ UINT32 owner; ++ UINT32 src_addr; ++ UINT32 ctrl_size; ++}IOCTL_LLP_t; ++ ++typedef unsigned char byte; ++typedef unsigned short word; ++typedef unsigned long dword; ++ ++/* DMA Registers */ ++#define DMA_INT 0x00000000 ++#define DMA_INT_TC 0x00000004 ++#define DMA_CFG 0x00000024 ++#define DMA_INT_TC_CLR 0x00000008 ++#define DMA_TC 0x00000014 ++#define DMA_CSR 0x00000024 ++#define DMA_SYNC 0x00000028 ++ ++#define DMA_CH2_CSR 0x00000140 ++#define DMA_CH2_CFG 0x00000144 ++#define DMA_CH2_SRC_ADDR 0x00000148 ++#define DMA_CH2_DST_ADDR 0x0000014c ++#define DMA_CH2_LLP 0x00000150 ++#define DMA_CH2_SIZE 0x00000154 ++ ++#define DMA_CH3_CSR 0x00000160 ++#define DMA_CH3_CFG 0x00000164 ++#define DMA_CH3_SRC_ADDR 0x00000168 ++#define DMA_CH3_DST_ADDR 0x0000016c ++#define DMA_CH3_LLP 0x00000170 ++#define DMA_CH3_SIZE 0x00000174 ++ ++#define SSP_DEVICE_ID 0x00 ++#define SSP_CTRL_STATUS 0x04 ++#define SSP_FRAME_CTRL 0x08 ++#define SSP_BAUD_RATE 0x0c ++#define SSP_FRAME_CTRL2 0x10 ++#define SSP_FIFO_CTRL 0x14 ++#define SSP_TX_SLOT_VALID0 0x18 ++#define SSP_TX_SLOT_VALID1 0x1c ++#define SSP_TX_SLOT_VALID2 0x20 ++#define SSP_TX_SLOT_VALID3 0x24 ++#define SSP_RX_SLOT_VALID0 0x28 ++#define SSP_RX_SLOT_VALID1 0x2c ++#define SSP_RX_SLOT_VALID2 0x30 ++#define SSP_RX_SLOT_VALID3 0x34 ++#define SSP_SLOT_SIZE0 0x38 ++#define SSP_SLOT_SIZE1 0x3c ++#define SSP_SLOT_SIZE2 0x40 ++#define SSP_SLOT_SIZE3 0x44 ++#define SSP_READ_PORT 0x48 ++#define SSP_WRITE_PORT 0x4c ++ ++ ++ ++#define SSP_I2S_INIT_BUF _IO ('q', 0x00) ++#define SSP_I2S_STOP_DMA _IO ('q', 0x01) ++#define SSP_I2S_FILE_LEN _IOW ('q', 0x2, int) ++/* ++#define SSP_GET_HOOK_STATUS _IOR ('q', 0xC0, int) ++#define SSP_GET_LINEFEED _IOR ('q', 0xC1, int) ++#define SSP_SET_LINEFEED _IOW ('q', 0xC2, int) ++#define SSP_GET_REG _IOWR ('q', 0xC3, struct Ssp_reg *) ++#define SSP_SET_REG _IOWR ('q', 0xC4, struct Ssp_reg *) ++#define SSP_GEN_OFFHOOK_TONE _IO ('q', 0xC5) ++#define SSP_GEN_BUSY_TONE _IO ('q', 0xC6) ++#define SSP_GEN_RINGBACK_TONE _IO ('q', 0xC7) ++#define SSP_GEN_CONGESTION_TONE _IO ('q', 0xC8) ++#define SSP_DISABLE_DIALTONE _IO ('q', 0xC9) ++#define SSP_PHONE_RING_START _IO ('q', 0xCA) ++*/ ++ ++ ++#endif //__GEMINI_I2S_H__ +--- /dev/null ++++ b/include/asm-arm/arch-sl2312/gemini_ssp.h +@@ -0,0 +1,263 @@ ++/****************************************************************************** ++ * gemini_ssp.h ++ * ++ * ++ *****************************************************************************/ ++ ++#include ++#include ++#include ++#include ++//#include "proslic.h" ++ ++typedef __u16 UINT16; ++typedef __u32 UINT32; ++typedef __u8 UINT8; ++typedef __u8 BOOL; ++ ++#define TRUE 1 ++#define FALSE 0 ++ ++/***************************************/ ++/* define GPIO module base address */ ++/***************************************/ ++#define DMA_CONTROL_PHY_BASE (IO_ADDRESS(SL2312_GENERAL_DMA_BASE)) ++#define DMA_CONTROL_SSP_BASE (IO_ADDRESS(SL2312_SSP_CTRL_BASE)) ++#define SSP_INT IRQ_SSP ++#define GPIO_BASE_ADDR (IO_ADDRESS(SL2312_GPIO_BASE)) ++#define GPIO_BASE_ADDR1 (IO_ADDRESS(SL2312_GPIO_BASE1)) ++#define GLOBAL_BASE (IO_ADDRESS(SL2312_GLOBAL_BASE)) ++ ++/* define read/write register utility */ ++#define READ_SSP_REG(offset) (__raw_readl(offset+DMA_CONTROL_SSP_BASE)) ++#define WRITE_SSP_REG(offset,val) (__raw_writel(val,offset+DMA_CONTROL_SSP_BASE)) ++ ++#define READ_GPIO_REG(offset) (__raw_readl(offset+GPIO_BASE_ADDR)) ++#define WRITE_GPIO_REG(offset,val) (__raw_writel(val,offset+GPIO_BASE_ADDR)) ++ ++#define READ_GPIO1_REG(offset) (__raw_readl(offset+GPIO_BASE_ADDR1)) ++#define WRITE_GPIO1_REG(offset,val) (__raw_writel(val,offset+GPIO_BASE_ADDR1)) ++ ++#define READ_DMA_REG(offset) (__raw_readl(offset+DMA_CONTROL_PHY_BASE)) ++#define WRITE_DMA_REG(offset,val) (__raw_writel(val,offset+DMA_CONTROL_PHY_BASE)) ++ ++#define READ_GLOBAL_REG(offset) (__raw_readl(offset+GLOBAL_BASE)) ++#define WRITE_GLOBAL_REG(offset,val) (__raw_writel(val,offset+GLOBAL_BASE)) ++ ++ ++#define SSP_GPIO_INT IRQ_GPIO ++ ++#ifndef CONFIG_SL3516_ASIC ++#define SSP_GPIO_INT_BIT 0x00000400 //GPIO[10] : SLIC interrupt pin ++ ++#define GPIO_EECK 0x00000040 /* SCK: GPIO[06] */ ++#define GPIO_EECS 0x00000080 /* SCS: GPIO[07] */ ++#define GPIO_MISO 0x00000200 /* SDO: GPIO[09] receive from 6996*/ ++#define GPIO_MOSI 0x00000100 /* SDI: GPIO[08] send to 6996*/ ++#define GPIO_MISO_BIT 9 ++#else ++#define SSP_GPIO_INT_BIT 0x00000001 //GPIO[0] : SLIC interrupt pin ++ ++//#if 0 ++//#define GPIO_EECK 0x80000000 /* SCK: GPIO1[31] */ ++//#define GPIO_EECS 0x40000000 /* SCS: GPIO1[30] */ ++//#define GPIO_MISO 0x20000000 /* SDO: GPIO1[29] receive from 6996*/ ++//#define GPIO_MOSI 0x10000000 /* SDI: GPIO1[28] send to 6996*/ ++//#define GPIO_MISO_BIT 29 ++//#else ++//#define GPIO_EECK 0x00000100 /* SCK: GPIO1[08] */ ++//#define GPIO_EECS 0x08000000 /* SCS: GPIO1[27] */ ++//#define GPIO_MISO 0x00000080 /* SDO: GPIO1[07] receive from 6996*/ ++//#define GPIO_MOSI 0x00000200 /* SDI: GPIO1[09] send to 6996*/ ++//#define GPIO_MISO_BIT 7 ++//#endif ++#endif ++ ++ ++enum GPIO_REG ++{ ++ GPIO_DATA_OUT = 0x00, ++ GPIO_DATA_IN = 0x04, ++ GPIO_PIN_DIR = 0x08, ++ GPIO_BY_PASS = 0x0c, ++ GPIO_DATA_SET = 0x10, ++ GPIO_DATA_CLEAR = 0x14, ++ GPIO_INT_ENABLE = 0x20, ++ GPIO_INT_RAWSTATE = 0x24, ++ GPIO_INT_MASKSTATE = 0x28, ++ GPIO_INT_MASK = 0x2C, ++ GPIO_INT_CLEAR = 0x30, ++ GPIO_INT_TRIGGER = 0x34, ++ GPIO_INT_BOTH = 0x38, ++ GPIO_INT_POLARITY = 0x3C ++}; ++ ++ ++#define SPI_ADD_LEN 7 // bits of Address ++#define SPI_DAT_LEN 8 // bits of Data ++ ++ ++ ++//#ifdef MIDWAY_DIAG ++#define DAISY_MODE 1 ++#if (DAISY_MODE==1) ++#define NUMBER_OF_CHAN 2 ++#else ++#define NUMBER_OF_CHAN 1 ++#endif ++#define LLP_SIZE 8 ++#define SBUF_SIZE 512 //0xff0 //2560 ++#define DBUF_SIZE SBUF_SIZE*NUMBER_OF_CHAN //0xff0 //2560 ++#define TBUF_SIZE (LLP_SIZE)*DBUF_SIZE ++#define DESC_NUM 1 ++#define DTMF_NUM 20 ++ ++/* define owner bit of SSP */ ++//data into SSP and transfer to AP==> SSP_Rx ++//data out of SSP and transfer to SLIC==> SSP_Tx ++#define CPU 0 ++#define DMA 1 ++ ++#define DMA_DEMO 0 ++#define DMA_NDEMO 1 ++//#define DMA_NONE 2 ++ ++enum exceptions { ++ PROSLICiNSANE, ++ TIMEoUTpOWERuP, ++ TIMEoUTpOWERdOWN, ++ POWERlEAK, ++ TIPoRrINGgROUNDsHORT, ++ POWERaLARMQ1, ++ POWERaLARMQ2, ++ POWERaLARMQ3, ++ POWERaLARMQ4, ++ POWERaLARMQ5, ++ OWERaLARMQ6, ++ CM_CAL_ERR ++}; ++ ++typedef struct ++{ ++ UINT32 src_addr; ++ UINT32 dst_addr; ++ UINT32 llp; ++ UINT32 ctrl_size; ++}DMA_LLP_t; ++ ++typedef struct { ++ unsigned int own ; ++ char *tbuf; ++ //UINT32 *LinkAddrT; ++ DMA_LLP_t LLPT[LLP_SIZE]; ++}DMA_Tx_t; ++ ++typedef struct { ++ unsigned int own ; ++ char *rbuf; ++ //UINT32 *LinkAddrR; ++ DMA_LLP_t LLPR[LLP_SIZE]; ++}DMA_Rx_t; ++ ++//typedef struct { ++// //UINT32 init_stat; ++// struct chipStruct chipData ; /* Represents a proslics state, cached information, and timers */ ++// struct phone_device p; ++// ++// ++//}SSP_SLIC; ++ ++ ++ ++/* DMA Registers */ ++#define DMA_INT 0x00000000 ++#define DMA_INT_TC 0x00000004 ++#define DMA_CFG 0x00000024 ++#define DMA_INT_TC_CLR 0x00000008 ++#define DMA_TC 0x00000014 ++#define DMA_CSR 0x00000024 ++#define DMA_SYNC 0x00000028 ++ ++#define DMA_CH2_CSR 0x00000140 ++#define DMA_CH2_CFG 0x00000144 ++#define DMA_CH2_SRC_ADDR 0x00000148 ++#define DMA_CH2_DST_ADDR 0x0000014c ++#define DMA_CH2_LLP 0x00000150 ++#define DMA_CH2_SIZE 0x00000154 ++ ++#define DMA_CH3_CSR 0x00000160 ++#define DMA_CH3_CFG 0x00000164 ++#define DMA_CH3_SRC_ADDR 0x00000168 ++#define DMA_CH3_DST_ADDR 0x0000016c ++#define DMA_CH3_LLP 0x00000170 ++#define DMA_CH3_SIZE 0x00000174 ++ ++#define SSP_DEVICE_ID 0x00 ++#define SSP_CTRL_STATUS 0x04 ++#define SSP_FRAME_CTRL 0x08 ++#define SSP_BAUD_RATE 0x0c ++#define SSP_FRAME_CTRL2 0x10 ++#define SSP_FIFO_CTRL 0x14 ++#define SSP_TX_SLOT_VALID0 0x18 ++#define SSP_TX_SLOT_VALID1 0x1c ++#define SSP_TX_SLOT_VALID2 0x20 ++#define SSP_TX_SLOT_VALID3 0x24 ++#define SSP_RX_SLOT_VALID0 0x28 ++#define SSP_RX_SLOT_VALID1 0x2c ++#define SSP_RX_SLOT_VALID2 0x30 ++#define SSP_RX_SLOT_VALID3 0x34 ++#define SSP_SLOT_SIZE0 0x38 ++#define SSP_SLOT_SIZE1 0x3c ++#define SSP_SLOT_SIZE2 0x40 ++#define SSP_SLOT_SIZE3 0x44 ++#define SSP_READ_PORT 0x48 ++#define SSP_WRITE_PORT 0x4c ++ ++ ++void printFreq_Revision(int num); ++void SLIC_SPI_write(int num, UINT8 ,UINT8); ++UINT8 SLIC_SPI_read(int num, UINT8); ++void SLIC_SPI_write_bit(char); ++void SLIC_SPI_ind_write(int num, UINT8, UINT16); ++UINT16 SLIC_SPI_ind_read(int num, UINT8); ++void SLIC_SPI_CS_enable(UINT8); ++unsigned int SLIC_SPI_read_bit(void); ++void SLIC_SPI_pre_st(void); ++UINT32 ssp_init(void); ++UINT16 SLIC_SPI_get_identifier(int num); ++int selfTest(int num); ++void exception (int num, enum exceptions e); ++int SLIC_init(int num); ++UINT8 version(int num); ++UINT8 chipType (int num); ++void SLIC_init_ind_reg_set(int num); ++UINT8 powerUp(int num); ++UINT8 powerLeakTest(int num); ++void SLIC_init_reg_set(int num); ++int calibrate(int num); ++void goActive(int num); ++void clearInterrupts(int num); ++void setState(int num, int); ++UINT8 loopStatus(int num); ++int verifyIndirectRegisters(int num); ++int verifyIndirectReg(int num, UINT8 , UINT16); ++void sendProSLICID(int num); ++void disableOscillators(int num); ++UINT8 checkSum(int num, char * string ); ++void fskInitialization (int num); ++void fskByte(int num, UINT8 c); ++void waitForInterrupt (int num); ++//void findNumber(void); ++UINT8 dtmfAction(int num); ++UINT8 digit(int num); ++void interrupt_init(void); ++//void gemini_slic_isr (int ); ++int groundShort(int num); ++void clearAlarmBits(int num); ++void stopRinging(int num); ++void activateRinging(int num); ++void initializeLoopDebounceReg(int num); ++void busyJapan(int num) ; ++void ringBackJapan(int num) ; ++void stateMachine(int num); ++ +--- /dev/null ++++ b/include/asm-arm/arch-sl2312/hardware.h +@@ -0,0 +1,47 @@ ++/* ++ * linux/include/asm-arm/arch-epxa10/hardware.h ++ * ++ * This file contains the hardware definitions of the Integrator. ++ * ++ * Copyright (C) 1999 ARM Limited. ++ * Copyright (C) 2001 Altera Corporation ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; either version 2 of the License, or ++ * (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA ++ */ ++#ifndef __ASM_ARCH_HARDWARE_H ++#define __ASM_ARCH_HARDWARE_H ++ ++#include ++ ++#define pcibios_assign_all_busses() 1 ++ ++/* ++ * Where in virtual memory the IO devices (timers, system controllers ++ * and so on) ++ * ++ * macro to get at IO space when running virtually ++*/ ++ ++#define IO_ADDRESS(x) (((x&0xfff00000)>>4)|(x & 0x000fffff)|0xF0000000) ++#define FLASH_VBASE 0xFE000000 ++#define FLASH_SIZE 0x1000000// 8M ++#define FLASH_START SL2312_FLASH_BASE ++#define FLASH_VADDR(x) ((x & 0x00ffffff)|0xFE000000) // flash virtual address ++ ++#define PCIBIOS_MIN_IO 0x100 // 0x000-0x100 AHB reg and PCI config, data ++#define PCIBIOS_MIN_MEM 0 ++ ++#endif ++ +--- /dev/null ++++ b/include/asm-arm/arch-sl2312/int_ctrl.h +@@ -0,0 +1,171 @@ ++/* ++ * ++ * This file contains the register definitions for the Excalibur ++ * Timer TIMER00. ++ * ++ * Copyright (C) 2001 Altera Corporation ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; either version 2 of the License, or ++ * (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA ++ */ ++ ++#ifndef __INT_CTRL_H ++#define __INT_CTRL_H ++ ++#define PCI_IRQ_OFFSET 64 /* PCI start IRQ number */ ++#define FIQ_OFFSET 32 ++ ++#define IRQ_SOURCE(base_addr) (INT_CTRL_TYPE(base_addr + 0x00)) ++#define IRQ_MASK(base_addr) (INT_CTRL_TYPE (base_addr + 0x04 )) ++#define IRQ_CLEAR(base_addr) (INT_CTRL_TYPE (base_addr + 0x08 )) ++#define IRQ_TMODE(base_addr) (INT_CTRL_TYPE (base_addr + 0x0C )) ++#define IRQ_TLEVEL(base_addr) (INT_CTRL_TYPE (base_addr + 0x10 )) ++#define IRQ_STATUS(base_addr) (INT_CTRL_TYPE (base_addr + 0x14 )) ++#define FIQ_SOURCE(base_addr) (INT_CTRL_TYPE (base_addr + 0x20 )) ++#define FIQ_MASK(base_addr) (INT_CTRL_TYPE (base_addr + 0x24 )) ++#define FIQ_CLEAR(base_addr) (INT_CTRL_TYPE (base_addr + 0x28 )) ++#define FIQ_TMODE(base_addr) (INT_CTRL_TYPE (base_addr + 0x2C )) ++#define FIQ_LEVEL(base_addr) (INT_CTRL_TYPE (base_addr + 0x30 )) ++#define FIQ_STATUS(base_addr) (INT_CTRL_TYPE (base_addr + 0x34 )) ++ ++#ifdef CONFIG_SL3516_ASIC ++#define IRQ_SERIRQ0_OFFSET 30 ++#define IRQ_PCID_OFFSET 29 ++#define IRQ_PCIC_OFFSET 28 ++#define IRQ_PCIB_OFFSET 27 ++#define IRQ_PWR_OFFSET 26 ++#define IRQ_CIR_OFFSET 25 ++#define IRQ_GPIO2_OFFSET 24 ++#define IRQ_GPIO1_OFFSET 23 ++#define IRQ_GPIO_OFFSET 22 ++#define IRQ_SSP_OFFSET 21 ++#define IRQ_LPC_OFFSET 20 ++#define IRQ_LCD_OFFSET 19 ++#define IRQ_UART_OFFSET 18 ++#define IRQ_RTC_OFFSET 17 ++#define IRQ_TIMER3_OFFSET 16 ++#define IRQ_TIMER2_OFFSET 15 ++#define IRQ_TIMER1_OFFSET 14 ++#define IRQ_FLASH_OFFSET 12 ++#define IRQ_USB1_OFFSET 11 ++#define IRQ_USB0_OFFSET 10 ++#define IRQ_DMA_OFFSET 9 ++#define IRQ_PCI_OFFSET 8 ++#define IRQ_IPSEC_OFFSET 7 ++#define IRQ_RAID_OFFSET 6 ++#define IRQ_IDE1_OFFSET 5 ++#define IRQ_IDE0_OFFSET 4 ++#define IRQ_WATCHDOG_OFFSET 3 ++#define IRQ_GMAC1_OFFSET 2 ++#define IRQ_GMAC0_OFFSET 1 ++#define IRQ_CPU0_IP_IRQ_OFFSET 0 ++ ++#define IRQ_SERIRQ0_MASK (1<<30) ++#define IRQ_PCID_MASK (1<<29) ++#define IRQ_PCIC_MASK (1<<28) ++#define IRQ_PCIB_MASK (1<<27) ++#define IRQ_PWR_MASK (1<<26) ++#define IRQ_CIR_MASK (1<<25) ++#define IRQ_GPIO2_MASK (1<<24) ++#define IRQ_GPIO1_MASK (1<<23) ++#define IRQ_GPIO_MASK (1<<22) ++#define IRQ_SSP_MASK (1<<21) ++#define IRQ_LPC_MASK (1<<20) ++#define IRQ_LCD_MASK (1<<19) ++#define IRQ_UART_MASK (1<<18) ++#define IRQ_RTC_MASK (1<<17) ++#define IRQ_TIMER3_MASK (1<<16) ++#define IRQ_TIMER2_MASK (1<<15) ++#define IRQ_TIMER1_MASK (1<<14) ++#define IRQ_FLASH_MASK (1<<12) ++#define IRQ_USB1_MASK (1<<11) ++#define IRQ_USB0_MASK (1<<10) ++#define IRQ_DMA_MASK (1<< 9) ++#define IRQ_PCI_MASK (1<< 8) ++#define IRQ_IPSEC_MASK (1<< 7) ++#define IRQ_RAID_MASK (1<< 6) ++#define IRQ_IDE1_MASK (1<< 5) ++#define IRQ_IDE0_MASK (1<< 4) ++#define IRQ_WATCHDOG_MASK (1<< 3) ++#define IRQ_GMAC1_MASK (1<< 2) ++#define IRQ_GMAC0_MASK (1<< 1) ++#define IRQ_CPU0_IP_IRQ_MASK (1<< 0) ++#else ++#define IRQ_SERIRQ0_OFFSET 30 ++#define IRQ_PCID_OFFSET 29 ++#define IRQ_PCIC_OFFSET 28 ++#define IRQ_PCIB_OFFSET 27 ++#define IRQ_PWR_OFFSET 26 ++#define IRQ_CIR_OFFSET 25 ++#define IRQ_GPIO2_OFFSET 24 ++#define IRQ_GPIO1_OFFSET 23 ++#define IRQ_GPIO_OFFSET 22 ++#define IRQ_SSP_OFFSET 21 ++#define IRQ_LPC_OFFSET 20 ++#define IRQ_LCD_OFFSET 19 ++#define IRQ_UART_OFFSET 18 ++#define IRQ_RTC_OFFSET 17 ++#define IRQ_TIMER3_OFFSET 16 ++#define IRQ_TIMER2_OFFSET 15 ++#define IRQ_TIMER1_OFFSET 14 ++#define IRQ_FLASH_OFFSET 12 ++#define IRQ_USB1_OFFSET 11 ++#define IRQ_USB0_OFFSET 10 ++#define IRQ_DMA_OFFSET 9 ++#define IRQ_PCI_OFFSET 8 ++#define IRQ_IPSEC_OFFSET 7 ++#define IRQ_RAID_OFFSET 6 ++#define IRQ_IDE1_OFFSET 5 ++#define IRQ_IDE0_OFFSET 4 ++#define IRQ_WATCHDOG_OFFSET 3 ++#define IRQ_GMAC1_OFFSET 2 ++#define IRQ_GMAC0_OFFSET 1 ++#define IRQ_CPU0_IP_IRQ_OFFSET 0 ++ ++#define IRQ_SERIRQ0_MASK (1<<30) ++#define IRQ_PCID_MASK (1<<29) ++#define IRQ_PCIC_MASK (1<<28) ++#define IRQ_PCIB_MASK (1<<27) ++#define IRQ_PWR_MASK (1<<26) ++#define IRQ_CIR_MASK (1<<25) ++#define IRQ_GPIO2_MASK (1<<24) ++#define IRQ_GPIO1_MASK (1<<23) ++#define IRQ_GPIO_MASK (1<<22) ++#define IRQ_SSP_MASK (1<<21) ++#define IRQ_LPC_MASK (1<<20) ++#define IRQ_LCD_MASK (1<<19) ++#define IRQ_UART_MASK (1<<18) ++#define IRQ_RTC_MASK (1<<17) ++#define IRQ_TIMER3_MASK (1<<16) ++#define IRQ_TIMER2_MASK (1<<15) ++#define IRQ_TIMER1_MASK (1<<14) ++#define IRQ_FLASH_MASK (1<<12) ++#define IRQ_USB1_MASK (1<<11) ++#define IRQ_USB0_MASK (1<<10) ++#define IRQ_DMA_MASK (1<< 9) ++#define IRQ_PCI_MASK (1<< 8) ++#define IRQ_IPSEC_MASK (1<< 7) ++#define IRQ_RAID_MASK (1<< 6) ++#define IRQ_IDE1_MASK (1<< 5) ++#define IRQ_IDE0_MASK (1<< 4) ++#define IRQ_WATCHDOG_MASK (1<< 3) ++#define IRQ_GMAC1_MASK (1<< 2) ++#define IRQ_GMAC0_MASK (1<< 1) ++#define IRQ_CPU0_IP_IRQ_MASK (1<< 0) ++#endif ++ ++ ++#endif /* __INT_CTRL_H */ ++ ++ +--- /dev/null ++++ b/include/asm-arm/arch-sl2312/io.h +@@ -0,0 +1,50 @@ ++/* ++ * linux/include/asm-arm/arch-epxa10db/io.h ++ * ++ * Copyright (C) 1999 ARM Limited ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; either version 2 of the License, or ++ * (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA ++ */ ++#ifndef __ASM_ARM_ARCH_IO_H ++#define __ASM_ARM_ARCH_IO_H ++ ++#define IO_SPACE_LIMIT 0xffffffff ++ ++ ++/* ++ * Generic virtual read/write ++ */ ++/* ++#define __arch_getw(a) (*(volatile unsigned short *)(a)) ++#define __arch_putw(v,a) (*(volatile unsigned short *)(a) = (v)) ++*/ ++/*#define outsw __arch_writesw ++#define outsl __arch_writesl ++#define outsb __arch_writesb ++#define insb __arch_readsb ++#define insw __arch_readsw ++#define insl __arch_readsl*/ ++ ++#define __io(a) (a) ++#define __mem_pci(a) (a) ++/* ++#define __arch_getw(a) (*(volatile unsigned short *)(a)) ++#define __arch_putw(v,a) (*(volatile unsigned short *)(a) = (v)) ++*/ ++#define iomem_valid_addr(off,size) (1) ++#define iomem_to_phys(off) (off) ++ ++ ++#endif +--- /dev/null ++++ b/include/asm-arm/arch-sl2312/ipi.h +@@ -0,0 +1,189 @@ ++/* ++ * linux/include/asm-arm/arch-sl2312/system.h ++ * ++ * Copyright (C) 1999 ARM Limited ++ * Copyright (C) 2000 Deep Blue Solutions Ltd ++ * Copyright (C) 2001 Altera Corporation ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; either version 2 of the License, or ++ * (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA ++ */ ++#ifndef __ASM_ARCH_IPI_H ++#define __ASM_ARCH_IPI_H ++#include ++ ++//#define spin_lock(x) spin_lock_dt(x) ++//#define spin_unlock(x) spin_unlock_dt(x) ++ ++#define SWAP_OFFSET 0x400000 ++#define SWAP_SIZE 0x400000 ++ ++#define SHARE_MEM_ADDR 0x2000000 ++#define SHARE_MEM_SIZE 1024*1024 ++ ++ ++//--> Add by jason for IPI testing ++// memory layout for maste & slave bin ++#define MASTERTEXT 0x8000 ++#define SLAVETEXT 0x108000 ++#define SHARESIZE 0x4000 ++#define SHAREADDR SHARE_MEM_ADDR // starting 8M ++ ++// CPU1 reset release ++#define GLOBAL_BASE IO_ADDRESS(0x40000000) ++#define GLOBAL_SOFTRESET (GLOBAL_BASE + 0x0C) ++#define CPU1_RESET_BIT_MASK 0x40000000 ++ ++// IPI , need to redefine the folliwing, bug ++#define CPU0_STATUS (GLOBAL_BASE + 0x0038) ++#define CPU1_STATUS (GLOBAL_BASE + 0x003C) ++#define CPU_IPI_BIT_MASK 0x80000000 ++ ++/* Your basic SMP spinlocks, allowing only a single CPU anywhere ++*/ ++typedef struct { ++ volatile unsigned int lock; ++} spinlock_dt; ++ ++ ++#define MASTER_BIT 0x01 ++#define SLAVE_BIT 0x02 ++#define HEART_BIT 0x04 ++#define IPI0_IRQ_BIT 0x08 ++#define IPI0_FIQ_BIT 0x10 ++#define IPI1_IRQ_BIT 0x20 ++#define IPI1_FIQ_BIT 0x40 ++ ++#define IRQ 0 ++#define FIQ 1 ++#define DONE 0xff ++ ++#define CPU0 0x0 ++#define CPU1 0x1 ++ ++#define MAXCHAR 128*1024 ++typedef struct { ++ int flag; ++ int uart_flag; ++ int cnt; ++ spinlock_dt lk; ++ char message[MAXCHAR]; ++}s_mailbox; ++ ++// JScale proj definition ++typedef struct { ++ u16 type; // message Type ++ u16 length; // message length, including message header ++} IPC_MSG_HDR_T; ++ ++typedef struct{ ++ IPC_MSG_HDR_T hdr; ++ u32 input_location; ++ u32 input_size; ++ u32 output_location; ++ u16 ScaledImageWidth; ++ u16 ScaledImageHeight; ++ u8 ScaledImageQuality; ++ u8 MaintainResultionRatio; ++ u8 TwoStepScaling; ++ u8 InputFormat; ++ u8 verbose; ++ u8 reserved[3]; ++} JSCALE_REQ_T; ++ ++typedef struct{ ++ IPC_MSG_HDR_T hdr; ++ u32 status; ++ u32 code; ++ u32 output_size; ++} JSCALE_RSP_T; ++ ++#define IPC_JSCALE_REQ_MSG 0 // JScale request from CPU-0 to CPU-1 ++#define IPC_JSCALE_RSP_MSG 1 // JScale response from CPU-1 to CPU-0 ++ ++enum { ++ JSCALE_STATUS_OK = 0, ++ JSCALE_UNKNOWN_MSG_TYPE, ++ JSCALE_FAILED_FILE_SIZE, ++ JSCALE_FAILED_MALLOC, ++ JSCALE_FAILED_FORMAT, ++ JSCALE_DECODE_ERROR, ++ JSCALE_BUSY, ++}; ++// <-- JScale ++ ++#define GEMINI_IPI_IOCTL_BASE 'Z' ++#define GEMINI_IPI_JSCALE_REQ _IOW (GEMINI_IPI_IOCTL_BASE,0,JSCALE_REQ_T) ++#define GEMINI_IPI_JSCALE_STAT _IOR (GEMINI_IPI_IOCTL_BASE,1,JSCALE_RSP_T) ++ ++ ++/* ++* Simple spin lock operations. ++* ++*/ ++ ++#define spin_is_locked_dt(x)((x)->lock != 0) ++ ++static inline int test_and_set_dt(spinlock_dt *lock) ++{ ++unsigned long tmp; ++__asm__ __volatile__( ++"swp %0, %2, [%1]\n" ++: "=&r" (tmp) ++: "r" (&lock->lock), "r" (1) ++: "cc", "memory"); ++ ++return tmp; ++} ++ ++static inline void spin_lock_dt(spinlock_dt *lock) ++{ ++ ++unsigned long tmp; ++__asm__ __volatile__( ++"1: ldr %0, [%1]\n" ++"teq %0, #0\n" ++"swpeq %0, %2, [%1]\n" ++" teqeq %0, #0\n" ++" bne 1b" ++ : "=&r" (tmp) ++ : "r" (&lock->lock), "r" (1) ++ : "cc", "memory"); ++} ++ ++static inline void spin_unlock_dt(spinlock_dt *lock) ++{ ++ __asm__ __volatile__( ++" str %1, [%0]" ++ : ++ : "r" (&lock->lock), "r" (0) ++ : "cc", "memory"); ++} ++ ++static inline int getcpuid(void) ++{ ++ int cpuid; ++ ++ __asm__( ++"mrc p8, 0, r0, c0, c0, 0\n" ++"mov %0, r0" ++ :"=r"(cpuid) ++ : ++ :"r0"); ++ return (cpuid & 0x07); ++} ++ ++ ++ ++#endif +--- /dev/null ++++ b/include/asm-arm/arch-sl2312/irq.h +@@ -0,0 +1,23 @@ ++/* ++ * linux/include/asm-arm/arch-sl2312/irq.h ++ * ++ * Copyright (C) 1999 ARM Limited ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; either version 2 of the License, or ++ * (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA ++ */ ++ ++ // Since we have PCI interrupt which the interrupt line is pseudo ++ // we need do some fixup ++int fixup_irq(int irq); +--- /dev/null ++++ b/include/asm-arm/arch-sl2312/irqs.h +@@ -0,0 +1,102 @@ ++/* ++ * linux/include/asm-arm/arch-camelot/irqs.h ++ * ++ * Copyright (C) 2001 Altera Corporation ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; either version 2 of the License, or ++ * (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA ++ */ ++ ++/* Use the Excalibur chip definitions */ ++#define INT_CTRL_TYPE ++#include "asm/arch/int_ctrl.h" ++ ++#ifdef CONFIG_SL3516_ASIC ++#define IRQ_SERIRQ_MAX 31 ++#define IRQ_SERIRQ1 31 ++#define IRQ_SERIRQ0 30 ++#define IRQ_PCID 29 ++#define IRQ_PCIC 28 ++#define IRQ_PCIB 27 ++#define IRQ_PWR 26 ++#define IRQ_CIR 25 ++#define IRQ_GPIO2 24 ++#define IRQ_GPIO1 23 ++#define IRQ_GPIO 22 ++#define IRQ_SSP 21 ++#define IRQ_LPC 20 ++#define IRQ_LCD 19 ++#define IRQ_UART 18 ++#define IRQ_RTC 17 ++#define IRQ_TIMER3 16 ++#define IRQ_TIMER2 15 ++#define IRQ_TIMER1 14 ++#define IRQ_FLASH 12 ++#define IRQ_USB1 11 ++#define IRQ_USB0 10 ++#define IRQ_DMA 9 ++#define IRQ_PCI 8 ++#define IRQ_IPSEC 7 ++#define IRQ_RAID 6 ++#define IRQ_IDE1 5 ++#define IRQ_IDE0 4 ++#define IRQ_WATCHDOG 3 ++#define IRQ_GMAC1 2 ++#define IRQ_GMAC0 1 ++#define IRQ_CPU0_IP_IRQ 0 ++#else ++#define IRQ_SERIRQ_MAX 31 ++#define IRQ_SERIRQ1 31 ++#define IRQ_SERIRQ0 30 ++#define IRQ_PCID 29 ++#define IRQ_PCIC 28 ++#define IRQ_PCIB 27 ++#define IRQ_PWR 26 ++#define IRQ_CIR 25 ++#define IRQ_GPIO2 24 ++#define IRQ_GPIO1 23 ++#define IRQ_GPIO 22 ++#define IRQ_SSP 21 ++#define IRQ_LPC 20 ++#define IRQ_LCD 19 ++#define IRQ_UART 18 ++#define IRQ_RTC 17 ++#define IRQ_TIMER3 16 ++#define IRQ_TIMER2 15 ++#define IRQ_TIMER1 14 ++#define IRQ_FLASH 12 ++#define IRQ_USB1 11 ++#define IRQ_USB0 10 ++#define IRQ_DMA 9 ++#define IRQ_PCI 8 ++#define IRQ_IPSEC 7 ++#define IRQ_RAID 6 ++#define IRQ_IDE1 5 ++#define IRQ_IDE0 4 ++#define IRQ_WATCHDOG 3 ++#define IRQ_GMAC1 2 ++#define IRQ_GMAC0 1 ++#endif ++ ++#define ARCH_TIMER_IRQ IRQ_TIMER2 /* for MV 4.0 */ ++ ++#define IRQ_PCI_INTA PCI_IRQ_OFFSET + 0 ++#define IRQ_PCI_INTB PCI_IRQ_OFFSET + 1 ++#define IRQ_PCI_INTC PCI_IRQ_OFFSET + 2 ++#define IRQ_PCI_INTD PCI_IRQ_OFFSET + 3 ++ ++#define NR_IRQS (IRQ_PCI_INTD + 4) ++ ++ ++ +--- /dev/null ++++ b/include/asm-arm/arch-sl2312/it8712.h +@@ -0,0 +1,24 @@ ++ ++#ifndef __IT8712_H__ ++#define __IT8712_H__ ++ ++#include "asm/arch/sl2312.h" ++ ++#define IT8712_IO_BASE SL2312_LPC_IO_BASE ++// Device LDN ++#define LDN_SERIAL1 0x01 ++#define LDN_SERIAL2 0x02 ++#define LDN_PARALLEL 0x03 ++#define LDN_KEYBOARD 0x05 ++#define LDN_MOUSE 0x06 ++#define LDN_GPIO 0x07 ++ ++#define IT8712_UART1_PORT 0x3F8 ++#define IT8712_UART2_PORT 0x2F8 ++ ++#define IT8712_GPIO_BASE 0x800 // 0x800-0x804 for GPIO set1-set5 ++ ++void LPCSetConfig(char LdnNumber, char Index, char data); ++char LPCGetConfig(char LdnNumber, char Index); ++ ++#endif +--- /dev/null ++++ b/include/asm-arm/arch-sl2312/memory.h +@@ -0,0 +1,38 @@ ++/* ++ * linux/include/asm-arm/arch-sl2312/memory.h ++ * ++ * Copyright (C) 2001 Altera Corporation ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; either version 2 of the License, or ++ * (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA ++ */ ++#ifndef __ASM_ARCH_MMU_H ++#define __ASM_ARCH_MMU_H ++ ++/* ++ * Physical DRAM offset. ++ */ ++#define PHYS_OFFSET UL(0x00000000) ++ ++/* ++ * Virtual view <-> DMA view memory address translations ++ * virt_to_bus: Used to translate the virtual address to an ++ * address suitable to be passed to set_dma_addr ++ * bus_to_virt: Used to convert an address for DMA operations ++ * to an address that the kernel can use. ++ */ ++#define __virt_to_bus(x) (x - PAGE_OFFSET + /*SDRAM_BASE*/0) ++#define __bus_to_virt(x) (x - /*SDRAM_BASE*/0 + PAGE_OFFSET) ++ ++#endif +--- /dev/null ++++ b/include/asm-arm/arch-sl2312/param.h +@@ -0,0 +1,20 @@ ++/* ++ * linux/include/asm-arm/arch-epxa10db/param.h ++ * ++ * Copyright (C) 1999 ARM Limited ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; either version 2 of the License, or ++ * (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA ++ */ ++ +--- /dev/null ++++ b/include/asm-arm/arch-sl2312/pci.h +@@ -0,0 +1,18 @@ ++ ++#ifndef __SL2312_PCI_H__ ++#define __SL2312_PCI_H__ ++ ++#define SL2312_PCI_PMC 0x40 ++#define SL2312_PCI_PMCSR 0x44 ++#define SL2312_PCI_CTRL1 0x48 ++#define SL2312_PCI_CTRL2 0x4c ++#define SL2312_PCI_MEM1_BASE_SIZE 0x50 ++#define SL2312_PCI_MEM2_BASE_SIZE 0x54 ++#define SL2312_PCI_MEM3_BASE_SIZE 0x58 ++ ++ ++void sl2312_pci_mask_irq(unsigned int irq); ++void sl2312_pci_unmask_irq(unsigned int irq); ++int sl2312_pci_get_int_src(void); ++ ++#endif +--- /dev/null ++++ b/include/asm-arm/arch-sl2312/platform.h +@@ -0,0 +1,7 @@ ++#ifndef PLATFORM_H ++#define PLATFORM_H ++#include "sl2312.h" ++ ++#define MAXIRQNUM 68 ++#endif ++ +--- /dev/null ++++ b/include/asm-arm/arch-sl2312/preempt.h +@@ -0,0 +1,63 @@ ++/* ++ * include/asm-arm/arch-sl2312/preempt.h ++ * ++ * Timing support for preempt-stats, kfi, ilatency patches ++ * ++ * Author: dsingleton ++ * ++ * 2001-2004 (c) MontaVista Software, Inc. This file is licensed under ++ * the terms of the GNU General Public License version 2. This program ++ * is licensed "as is" without any warranty of any kind, whether express ++ * or implied. ++ */ ++ ++#ifndef _ASM_ARCH_PREEMT_H ++#define _ASM_ARCH_PREEMT_H ++ ++#include ++#include ++ ++static inline unsigned long clock_diff(unsigned long start, unsigned long stop) ++{ ++ return (start - stop); ++} ++ ++static inline unsigned int readclock(void) ++{ ++ unsigned int x; ++ ++ x = readl(IO_ADDRESS(SL2312_TIMER2_BASE)); ++ return x; ++} ++ ++static inline unsigned __ticks_per_usec(void) ++{ ++#ifdef CONFIG_SL3516_ASIC ++ unsigned int ahb_clock_rate_base=130; /* unit = MHz*/ ++ unsigned int reg_v=0; ++ unsigned int ticks_usec; ++ ++ reg_v = readl(IO_ADDRESS((SL2312_GLOBAL_BASE+4))); ++ reg_v >>=15; ++ ticks_usec = (ahb_clock_rate_base + (reg_v & 0x07)*10)>>2; ++ ++#else ++ unsigned int ticks_usec=20; ++#endif ++ ++ return ticks_usec; ++} ++ ++/* ++ * timer 1 runs @ 6Mhz 6 ticks = 1 microsecond ++ * and is configed as a count down timer. ++ */ ++#define TICKS_PER_USEC __ticks_per_usec() ++#define ARCH_PREDEFINES_TICKS_PER_USEC ++ ++#define clock_to_usecs(x) ((x) / TICKS_PER_USEC) ++ ++#define INTERRUPTS_ENABLED(x) (!(x & PSR_I_BIT)) ++ ++#endif ++ +--- /dev/null ++++ b/include/asm-arm/arch-sl2312/sl2312.h +@@ -0,0 +1,254 @@ ++#ifndef __sl2312_h ++#define __sl2312_h ++ ++/**************************************************************************** ++ * Copyright Storlink Corp 2002-2003. All rights reserved. * ++ *--------------------------------------------------------------------------* ++ * Name:board.s * ++ * Description: SL231x specfic define * ++ * Author: Plus Chen * ++ * Version: 0.9 Create ++ ****************************************************************************/ ++ ++/* ++ CPE address map; ++ ++ +==================================================== ++ 0x00000000 | FLASH ++ 0x0FFFFFFF | ++ |==================================================== ++ 0x10000000 | SDRAM ++ 0x1FFFFFFF | ++ |==================================================== ++ 0x20000000 | Global Registers 0x20000000-0x20FFFFFF ++ | EMAC and DMA 0x21000000-0x21FFFFFF ++ | UART Module 0x22000000-0x22FFFFFF ++ | Timer Module 0x23000000-0x23FFFFFF ++ | Interrupt Module 0x24000000-0x24FFFFFF ++ | RTC Module 0x25000000-0x25FFFFFF ++ | LPC Host Controller 0x26000000-0x26FFFFFF ++ | LPC Peripherial IO 0x27000000-0x27FFFFFF ++ | WatchDog Timer 0x28000000-0x28FFFFFF ++ 0x2FFFFFFF | Reserved 0x29000000-0x29FFFFFF ++ |===================================================== ++ 0x30000000 | PCI IO, Configuration Registers ++ 0x3FFFFFFF | ++ |===================================================== ++ 0x40000000 | PCI Memory ++ 0x4FFFFFFF | ++ |===================================================== ++ 0x50000000 | Ethernet MAC and DMA 0x50000000-0x50FFFFFF ++ | Security and DMA 0x51000000-0x51FFFFFF ++ | IDE Channel 0 Register 0x52000000-0x527FFFFF ++ | IDE Channel 1 Register 0x52800000-0x52FFFFFF ++ | USB Register 0x53000000-0x53FFFFFF ++ | Flash Controller 0x54000000-0x54FFFFFF ++ | DRAM Controller 0x55000000-0x55FFFFFF ++ 0x5FFFFFFF | Reserved 0x56000000-0x5FFFFFFF ++ |===================================================== ++ 0x60000000 | Reserved ++ 0x6FFFFFFF | ++ |===================================================== ++ 0x70000000 | FLASH shadow Memory ++ 0x7FFFFFFF | ++ |===================================================== ++ 0x80000000 | Big Endian of memory 0x00000000-0x7FFFFFFF ++ 0xFFFFFFFF | ++ +===================================================== ++*/ ++ ++ ++ ++/*------------------------------------------------------------------------------- ++ Memory Map definitions ++-------------------------------------------------------------------------------- */ ++#define TEST 1 ++#if 0 ++ ++static inline int GETCPUID() ++{ ++ int cpuid; ++ __asm__( ++"mrc p8, 0, r0, c0, c0, 0\n" ++"mov %0, r0" ++ :"=r"(cpuid) ++ : ++ :"r0"); ++ return (cpuid & 0x07); ++} ++#endif ++#define SL2312_SRAM_BASE 0x70000000 // SRAM base after remap ++#define SL2312_DRAM_BASE 0x00000000 // DRAM base after remap ++#define SL2312_RAM_BASE 0x10000000 // RAM code base before remap ++#define SL2312_FLASH_BASE 0x30000000 ++#define SL2312_ROM_BASE 0x30000000 ++#define SL2312_GLOBAL_BASE 0x40000000 ++#define SL2312_WAQTCHDOG_BASE 0x41000000 ++#define SL2312_UART_BASE 0x42000000 ++#define SL2312_TIMER_BASE 0x43000000 ++#define SL2312_LCD_BASE 0x44000000 ++#define SL2312_RTC_BASE 0x45000000 ++#define SL2312_SATA_BASE 0x46000000 ++#define SL2312_LPC_HOST_BASE 0x47000000 ++#define SL2312_LPC_IO_BASE 0x47800000 ++// #define SL2312_INTERRUPT_BASE 0x48000000 ++#define SL2312_INTERRUPT0_BASE 0x48000000 ++#define SL2312_INTERRUPT1_BASE 0x49000000 ++//#define SL2312_INTERRUPT_BASE ((getcpuid()==0)?SL2312_INTERRUPT0_BASE:SL2312_INTERRUPT1_BASE) ++#define SL2312_INTERRUPT_BASE 0x48000000 ++#define SL2312_SSP_CTRL_BASE 0x4A000000 ++#define SL2312_POWER_CTRL_BASE 0x4B000000 ++#define SL2312_CIR_BASE 0x4C000000 ++#define SL2312_GPIO_BASE 0x4D000000 ++#define SL2312_GPIO_BASE1 0x4E000000 ++#define SL2312_GPIO_BASE2 0x4F000000 ++#define SL2312_PCI_IO_BASE 0x50000000 ++#define SL2312_PCI_MEM_BASE 0x58000000 ++#ifdef CONFIG_NET_SL351X ++#define SL2312_TOE_BASE 0x60000000 ++#define SL2312_GMAC0_BASE 0x6000A000 ++#define SL2312_GMAC1_BASE 0x6000E000 ++#else ++#define SL2312_GMAC0_BASE 0x60000000 ++#define SL2312_GMAC1_BASE 0x61000000 ++#endif ++#define SL2312_SECURITY_BASE 0x62000000 ++#define SL2312_IDE0_BASE 0x63000000 ++#define SL2312_IDE1_BASE 0x63400000 ++#define SL2312_RAID_BASE 0x64000000 ++#define SL2312_FLASH_CTRL_BASE 0x65000000 ++#define SL2312_DRAM_CTRL_BASE 0x66000000 ++#define SL2312_GENERAL_DMA_BASE 0x67000000 ++#define SL2312_USB_BASE 0x68000000 ++#define SL2312_USB0_BASE 0x68000000 ++#define SL2312_USB1_BASE 0x69000000 ++#define SL2312_FLASH_SHADOW 0x30000000 ++#define SL2312_BIG_ENDIAN_BASE 0x80000000 ++ ++#ifdef CONFIG_GEMINI_IPI ++#define CPU_1_MEM_BASE 0x4000000 // 64 MB ++#define CPU_1_DATA_OFFSET 0x4000000-0x300000 // Offset 61 MB ++#endif ++ ++#define SL2312_TIMER1_BASE SL2312_TIMER_BASE ++#define SL2312_TIMER2_BASE (SL2312_TIMER_BASE + 0x10) ++#define SL2312_TIMER3_BASE (SL2312_TIMER_BASE + 0x20) ++ ++#define SL2312_PCI_DMA_MEM1_BASE 0x00000000 ++#define SL2312_PCI_DMA_MEM2_BASE 0x00000000 ++#define SL2312_PCI_DMA_MEM3_BASE 0x00000000 ++#define SL2312_PCI_DMA_MEM1_SIZE 7 ++#define SL2312_PCI_DMA_MEM2_SIZE 6 ++#define SL2312_PCI_DMA_MEM3_SIZE 6 ++ ++/*------------------------------------------------------------------------------- ++ Global Module ++---------------------------------------------------------------------------------*/ ++#define GLOBAL_ID 0x00 ++#define GLOBAL_CHIP_ID 0x002311 ++#define GLOBAL_CHIP_REV 0xA0 ++#define GLOBAL_STATUS 0x04 ++#define GLOBAL_CONTROL 0x1C ++#define GLOBAL_REMAP_BIT 0x01 ++#define GLOBAL_RESET_REG 0x0C ++#define GLOBAL_MISC_REG 0x30 ++#define PFLASH_SHARE_BIT 0x02 ++ ++#define GLOBAL_RESET (1<<31) ++#define RESET_CPU1 (1<<30) ++#define RESET_SATA1 (1<<27) ++#define RESET_SATA0 (1<<26) ++#define RESET_CIR (1<<25) ++#define RESET_EXT_DEV (1<<24) ++#define RESET_WD (1<<23) ++#define RESET_GPIO2 (1<<22) ++#define RESET_GPIO1 (1<<21) ++#define RESET_GPIO0 (1<<20) ++#define RESET_SSP (1<<19) ++#define RESET_UART (1<<18) ++#define RESET_TIMER (1<<17) ++#define RESET_RTC (1<<16) ++#define RESET_INT0 (1<<15) ++#define RESET_INT1 (1<<14) ++#define RESET_LCD (1<<13) ++#define RESET_LPC (1<<12) ++#define RESET_APB (1<<11) ++#define RESET_DMA (1<<10) ++#define RESET_USB1 (1<<9 ) ++#define RESET_USB0 (1<<8 ) ++#define RESET_PCI (1<<7 ) ++#define RESET_GMAC1 (1<<6 ) ++#define RESET_GMAC0 (1<<5 ) ++#define RESET_IPSEC (1<<4 ) ++#define RESET_RAID (1<<3 ) ++#define RESET_IDE (1<<2 ) ++#define RESET_FLASH (1<<1 ) ++#define RESET_DRAM (1<<0 ) ++ ++ ++ ++ ++ ++ ++ ++ ++/*------------------------------------------------------------------------------- ++ DRAM Module ++---------------------------------------------------------------------------------*/ ++#define DRAM_SIZE_32M 0x2000000 ++#define DRAM_SIZE_64M 0x4000000 ++#define DRAM_SIZE_128M 0x8000000 ++ ++#define DRAM_SIZE DRAM_SIZE_128M ++ ++#define DRAM_SDRMR 0x00 ++#define SDRMR_DISABLE_DLL 0x80010000 ++ ++/*------------------------------------------------------------------------------ ++ Share Pin Flag ++--------------------------------------------------------------------------------*/ ++#ifdef CONFIG_SL2312_SHARE_PIN ++#define FLASH_SHARE_BIT 0 ++#define UART_SHARE_BIT 1 ++#define EMAC_SHARE_BIT 2 ++#define IDE_RW_SHARE_BIT 3 ++#define IDE_CMD_SHARE_BIT 4 ++#endif ++/*------------------------------------------------------------------------------- ++ System Clock ++---------------------------------------------------------------------------------*/ ++ ++#ifndef SYS_CLK ++#ifdef CONFIG_SL3516_ASIC ++#define SYS_CLK 150000000 ++#else ++#define SYS_CLK 20000000 ++#endif ++#endif ++ ++#define AHB_CLK SYS_CLK ++#define MAX_TIMER 3 ++#ifndef APB_CLK ++#ifdef CONFIG_SL3516_ASIC ++#define APB_CLK (SYS_CLK / 6) ++#else ++#define APB_CLK SYS_CLK ++#endif ++#endif ++ ++#ifdef CONFIG_SL3516_ASIC ++#define UART_CLK 48000000 // 30000000 for GeminiA chip, else 48000000 ++#else ++#define UART_CLK 48000000 ++#endif ++ ++#define SL2312_BAUD_115200 (UART_CLK / 1843200) ++#define SL2312_BAUD_57600 (UART_CLK / 921600) ++#define SL2312_BAUD_38400 (UART_CLK / 614400) ++#define SL2312_BAUD_19200 (UART_CLK / 307200) ++#define SL2312_BAUD_14400 (UART_CLK / 230400) ++#define SL2312_BAUD_9600 (UART_CLK / 153600) ++ ++#endif ++ ++ +--- /dev/null ++++ b/include/asm-arm/arch-sl2312/sl2312_ipsec.h +@@ -0,0 +1,684 @@ ++#ifndef _IPSEC_DIAG_H ++#define _IPSEC_DIAG_H ++ ++#include ++ ++#define BIG_ENDIAN 0 ++ ++#define IPSEC_TEST 0 ++#define ZERO_COPY 1 ++ ++#define UINT unsigned int ++#define BYTE unsigned char ++ ++/* define cipher algorithm */ ++enum CIPHER { ++ DES_ECB_E =20, ++ TDES_ECB_E =21, ++ AES_ECB_E =22, ++ DES_CBC_E =24, ++ TDES_CBC_E =25, ++ AES_CBC_E =26, ++ ++ DES_ECB_D =27, ++ TDES_ECB_D =28, ++ AES_ECB_D =29, ++ DES_CBC_D =31, ++ TDES_CBC_D =32, ++ AES_CBC_D =33, ++ A_SHA1 =12, ++ A_HMAC_SHA1 =13, ++ A_MD5 =14, ++ A_HMAC_MD5 =15, ++}; ++ ++// opMode ++#define CIPHER_ENC 0x1 ++#define CIPHER_DEC 0x3 ++#define AUTH 0x4 ++#define ENC_AUTH 0x5 ++#define AUTH_DEC 0x7 ++ ++// cipherAlgorithm ++#define CBC_DES 0x4 ++#define CBC_3DES 0x5 ++#define CBC_AES 0x6 ++#define ECB_DES 0x0 ++#define ECB_3DES 0x1 ++#define ECB_AES 0x2 ++ ++// authAlgorithm ++#define SHA1 0 ++#define MD5 1 ++#define HMAC_SHA1 2 ++#define HMAC_MD5 3 ++#define FCS 4 ++ ++//cipher mode ++#define ECB 0 ++#define CBC 1 ++ ++// authMode ++#define AUTH_APPEND 0 ++#define AUTH_CHKVAL 1 ++ ++/******************************************************/ ++/* the offset of IPSEC DMA register */ ++/******************************************************/ ++enum IPSEC_DMA_REGISTER { ++ IPSEC_DMA_DEVICE_ID = 0xff00, ++ IPSEC_DMA_STATUS = 0xff04, ++ IPSEC_TXDMA_CTRL = 0xff08, ++ IPSEC_TXDMA_FIRST_DESC = 0xff0c, ++ IPSEC_TXDMA_CURR_DESC = 0xff10, ++ IPSEC_RXDMA_CTRL = 0xff14, ++ IPSEC_RXDMA_FIRST_DESC = 0xff18, ++ IPSEC_RXDMA_CURR_DESC = 0xff1c, ++ IPSEC_TXDMA_BUF_ADDR = 0xff28, ++ IPSEC_RXDMA_BUF_ADDR = 0xff38, ++ IPSEC_RXDMA_BUF_SIZE = 0xff30, ++}; ++ ++#define IPSEC_STATUS_REG 0x00a8 ++#define IPSEC_RAND_NUM_REG 0x00ac ++ ++/******************************************************/ ++/* the field definition of IPSEC DMA Module Register */ ++/******************************************************/ ++typedef union ++{ ++ unsigned int bits32; ++ struct bit2_ff00 ++ { ++#if (BIG_ENDIAN==1) ++ unsigned int p_wclk : 4; /* DMA_APB write clock period */ ++ unsigned int p_rclk : 4; /* DMA_APB read clock period */ ++ unsigned int : 8; ++ unsigned int device_id : 12; ++ unsigned int revision_id : 4; ++#else ++ unsigned int revision_id : 4; ++ unsigned int device_id : 12; ++ unsigned int : 8; ++ unsigned int p_rclk : 4; /* DMA_APB read clock period */ ++ unsigned int p_wclk : 4; /* DMA_APB write clock period */ ++#endif ++ } bits; ++} IPSEC_DMA_DEVICE_ID_T; ++ ++typedef union ++{ ++ unsigned int bits32; ++ struct bit2_ff04 ++ { ++#if (BIG_ENDIAN==1) ++ unsigned int ts_finish : 1; /* finished tx interrupt */ ++ unsigned int ts_derr : 1; /* AHB Bus Error while tx */ ++ unsigned int ts_perr : 1; /* Tx Descriptor protocol error */ ++ unsigned int ts_eodi : 1; /* TxDMA end of descriptor interrupt */ ++ unsigned int ts_eofi : 1; /* TxDMA end of frame interrupt */ ++ unsigned int rs_finish : 1; /* finished rx interrupt */ ++ unsigned int rs_derr : 1; /* AHB Bus Error while rx */ ++ unsigned int rs_perr : 1; /* Rx Descriptor protocol error */ ++ unsigned int rs_eodi : 1; /* RxDMA end of descriptor interrupt */ ++ unsigned int rs_eofi : 1; /* RxDMA end of frame interrupt */ ++ unsigned int intr : 8; /* Peripheral interrupt */ ++ unsigned int dma_reset : 1; /* write 1 to this bit will cause DMA HClk domain soft reset */ ++ unsigned int peri_reset : 1; /* write 1 to this bit will cause DMA PClk domain soft reset */ ++ unsigned int : 3; ++ unsigned int loop_back : 1; /* loopback TxDMA to RxDMA */ ++ unsigned int intr_enable : 8; /* Peripheral Interrupt Enable */ ++#else ++ unsigned int intr_enable : 8; /* Peripheral Interrupt Enable */ ++ unsigned int loop_back : 1; /* loopback TxDMA to RxDMA */ ++ unsigned int : 3; ++ unsigned int peri_reset : 1; /* write 1 to this bit will cause DMA PClk domain soft reset */ ++ unsigned int dma_reset : 1; /* write 1 to this bit will cause DMA HClk domain soft reset */ ++ unsigned int intr : 8; /* Peripheral interrupt */ ++ unsigned int rs_eofi : 1; /* RxDMA end of frame interrupt */ ++ unsigned int rs_eodi : 1; /* RxDMA end of descriptor interrupt */ ++ unsigned int rs_perr : 1; /* Rx Descriptor protocol error */ ++ unsigned int rs_derr : 1; /* AHB Bus Error while rx */ ++ unsigned int rs_finish : 1; /* finished rx interrupt */ ++ unsigned int ts_eofi : 1; /* TxDMA end of frame interrupt */ ++ unsigned int ts_eodi : 1; /* TxDMA end of descriptor interrupt */ ++ unsigned int ts_perr : 1; /* Tx Descriptor protocol error */ ++ unsigned int ts_derr : 1; /* AHB Bus Error while tx */ ++ unsigned int ts_finish : 1; /* finished tx interrupt */ ++#endif ++ } bits; ++} IPSEC_DMA_STATUS_T; ++ ++typedef union ++{ ++ unsigned int bits32; ++ struct bit2_ff08 ++ { ++#if (BIG_ENDIAN==1) ++ unsigned int td_start : 1; /* Start DMA transfer */ ++ unsigned int td_continue : 1; /* Continue DMA operation */ ++ unsigned int td_chain_mode : 1; /* Descriptor Chain Mode;1-Descriptor Chain mode, 0-Direct DMA mode*/ ++ unsigned int : 1; ++ unsigned int td_prot : 4; /* TxDMA protection control */ ++ unsigned int td_burst_size : 2; /* TxDMA max burst size for every AHB request */ ++ unsigned int td_bus : 2; /* peripheral bus width;0 - 8 bits;1 - 16 bits */ ++ unsigned int td_endian : 1; /* AHB Endian. 0-little endian; 1-big endian */ ++ unsigned int td_finish_en : 1; /* DMA Finish Event Interrupt Enable;1-enable;0-mask */ ++ unsigned int td_fail_en : 1; /* DMA Fail Interrupt Enable;1-enable;0-mask */ ++ unsigned int td_perr_en : 1; /* Protocol Failure Interrupt Enable;1-enable;0-mask */ ++ unsigned int td_eod_en : 1; /* End of Descriptor interrupt Enable;1-enable;0-mask */ ++ unsigned int td_eof_en : 1; /* End of frame interrupt Enable;1-enable;0-mask */ ++ unsigned int : 14; ++#else ++ unsigned int : 14; ++ unsigned int td_eof_en : 1; /* End of frame interrupt Enable;1-enable;0-mask */ ++ unsigned int td_eod_en : 1; /* End of Descriptor interrupt Enable;1-enable;0-mask */ ++ unsigned int td_perr_en : 1; /* Protocol Failure Interrupt Enable;1-enable;0-mask */ ++ unsigned int td_fail_en : 1; /* DMA Fail Interrupt Enable;1-enable;0-mask */ ++ unsigned int td_finish_en : 1; /* DMA Finish Event Interrupt Enable;1-enable;0-mask */ ++ unsigned int td_endian : 1; /* AHB Endian. 0-little endian; 1-big endian */ ++ unsigned int td_bus : 2; /* peripheral bus width;0 - 8 bits;1 - 16 bits */ ++ unsigned int td_burst_size : 2; /* TxDMA max burst size for every AHB request */ ++ unsigned int td_prot : 4; /* TxDMA protection control */ ++ unsigned int : 1; ++ unsigned int td_chain_mode : 1; /* Descriptor Chain Mode;1-Descriptor Chain mode, 0-Direct DMA mode*/ ++ unsigned int td_continue : 1; /* Continue DMA operation */ ++ unsigned int td_start : 1; /* Start DMA transfer */ ++#endif ++ } bits; ++} IPSEC_TXDMA_CTRL_T; ++ ++typedef union ++{ ++ unsigned int bits32; ++ struct bit2_ff0c ++ { ++#if (BIG_ENDIAN==1) ++ unsigned int td_first_des_ptr : 28;/* first descriptor address */ ++ unsigned int td_busy : 1;/* 1-TxDMA busy; 0-TxDMA idle */ ++ unsigned int : 3; ++#else ++ unsigned int : 3; ++ unsigned int td_busy : 1;/* 1-TxDMA busy; 0-TxDMA idle */ ++ unsigned int td_first_des_ptr : 28;/* first descriptor address */ ++#endif ++ } bits; ++} IPSEC_TXDMA_FIRST_DESC_T; ++ ++typedef union ++{ ++ unsigned int bits32; ++ struct bit2_ff10 ++ { ++#if (BIG_ENDIAN==1) ++ unsigned int ndar : 28; /* next descriptor address */ ++ unsigned int eofie : 1; /* end of frame interrupt enable */ ++ unsigned int dec : 1; /* AHB bus address increment(0)/decrement(1) */ ++ unsigned int sof_eof : 2; ++#else ++ unsigned int sof_eof : 2; ++ unsigned int dec : 1; /* AHB bus address increment(0)/decrement(1) */ ++ unsigned int eofie : 1; /* end of frame interrupt enable */ ++ unsigned int ndar : 28; /* next descriptor address */ ++#endif ++ } bits; ++} IPSEC_TXDMA_CURR_DESC_T; ++ ++ ++typedef union ++{ ++ unsigned int bits32; ++ struct bit2_ff14 ++ { ++#if (BIG_ENDIAN==1) ++ unsigned int rd_start : 1; /* Start DMA transfer */ ++ unsigned int rd_continue : 1; /* Continue DMA operation */ ++ unsigned int rd_chain_mode : 1; /* Descriptor Chain Mode;1-Descriptor Chain mode, 0-Direct DMA mode*/ ++ unsigned int : 1; ++ unsigned int rd_prot : 4; /* DMA protection control */ ++ unsigned int rd_burst_size : 2; /* DMA max burst size for every AHB request */ ++ unsigned int rd_bus : 2; /* peripheral bus width;0 - 8 bits;1 - 16 bits */ ++ unsigned int rd_endian : 1; /* AHB Endian. 0-little endian; 1-big endian */ ++ unsigned int rd_finish_en : 1; /* DMA Finish Event Interrupt Enable;1-enable;0-mask */ ++ unsigned int rd_fail_en : 1; /* DMA Fail Interrupt Enable;1-enable;0-mask */ ++ unsigned int rd_perr_en : 1; /* Protocol Failure Interrupt Enable;1-enable;0-mask */ ++ unsigned int rd_eod_en : 1; /* End of Descriptor interrupt Enable;1-enable;0-mask */ ++ unsigned int rd_eof_en : 1; /* End of frame interrupt Enable;1-enable;0-mask */ ++ unsigned int : 14; ++#else ++ unsigned int : 14; ++ unsigned int rd_eof_en : 1; /* End of frame interrupt Enable;1-enable;0-mask */ ++ unsigned int rd_eod_en : 1; /* End of Descriptor interrupt Enable;1-enable;0-mask */ ++ unsigned int rd_perr_en : 1; /* Protocol Failure Interrupt Enable;1-enable;0-mask */ ++ unsigned int rd_fail_en : 1; /* DMA Fail Interrupt Enable;1-enable;0-mask */ ++ unsigned int rd_finish_en : 1; /* DMA Finish Event Interrupt Enable;1-enable;0-mask */ ++ unsigned int rd_endian : 1; /* AHB Endian. 0-little endian; 1-big endian */ ++ unsigned int rd_bus : 2; /* peripheral bus width;0 - 8 bits;1 - 16 bits */ ++ unsigned int rd_burst_size : 2; /* DMA max burst size for every AHB request */ ++ unsigned int rd_prot : 4; /* DMA protection control */ ++ unsigned int : 1; ++ unsigned int rd_chain_mode : 1; /* Descriptor Chain Mode;1-Descriptor Chain mode, 0-Direct DMA mode*/ ++ unsigned int rd_continue : 1; /* Continue DMA operation */ ++ unsigned int rd_start : 1; /* Start DMA transfer */ ++#endif ++ } bits; ++} IPSEC_RXDMA_CTRL_T; ++ ++typedef union ++{ ++ unsigned int bits32; ++ struct bit2_ff18 ++ { ++#if (BIG_ENDIAN==1) ++ unsigned int rd_first_des_ptr : 28;/* first descriptor address */ ++ unsigned int rd_busy : 1;/* 1-RxDMA busy; 0-RxDMA idle */ ++ unsigned int : 3; ++#else ++ unsigned int : 3; ++ unsigned int rd_busy : 1;/* 1-RxDMA busy; 0-RxDMA idle */ ++ unsigned int rd_first_des_ptr : 28;/* first descriptor address */ ++#endif ++ } bits; ++} IPSEC_RXDMA_FIRST_DESC_T; ++ ++typedef union ++{ ++ unsigned int bits32; ++ struct bit2_ff1c ++ { ++#if (BIG_ENDIAN==1) ++ unsigned int ndar : 28; /* next descriptor address */ ++ unsigned int eofie : 1; /* end of frame interrupt enable */ ++ unsigned int dec : 1; /* AHB bus address increment(0)/decrement(1) */ ++ unsigned int sof_eof : 2; ++#else ++ unsigned int sof_eof : 2; ++ unsigned int dec : 1; /* AHB bus address increment(0)/decrement(1) */ ++ unsigned int eofie : 1; /* end of frame interrupt enable */ ++ unsigned int ndar : 28; /* next descriptor address */ ++#endif ++ } bits; ++} IPSEC_RXDMA_CURR_DESC_T; ++ ++ ++ ++/******************************************************/ ++/* the field definition of IPSEC module Register */ ++/******************************************************/ ++typedef union ++{ ++ unsigned int id; ++ struct bit_0000 ++ { ++#if (BIG_ENDIAN==1) ++ unsigned int device_id : 28; ++ unsigned int revision_id : 4; ++#else ++ unsigned int revision_id : 4; ++ unsigned int device_id : 28; ++#endif ++ } bits; ++} IPSEC_ID_T; ++ ++typedef union ++{ ++ unsigned int control; ++ struct bit_0004 ++ { ++#if (BIG_ENDIAN==1) ++ unsigned int op_mode : 4; /* Operation Mode for the IPSec Module */ ++ unsigned int : 1; ++ unsigned int cipher_algorithm : 3; ++ unsigned int aesnk : 4; /* AES Key Size */ ++ unsigned int mix_key_sel : 1; /* 0:use rCipherKey0-3 1:use Key Mixer */ ++ unsigned int : 2; ++ unsigned int fcs_stream_copy : 1; /* enable authentication stream copy */ ++ unsigned int auth_mode : 1; /* 0-Append or 1-Check Authentication Result */ ++ unsigned int auth_algorithm : 3; ++ unsigned int : 1; ++ unsigned int auth_check_len : 3; /* Number of 32-bit words to be check or appended */ ++ /* by the authentication module */ ++ unsigned int process_id : 8; /* Used to identify process.This number will be */ ++ /* copied to the descriptor status of received packet*/ ++#else ++ unsigned int process_id : 8; /* Used to identify process.This number will be */ ++ /* copied to the descriptor status of received packet*/ ++ unsigned int auth_check_len : 3; /* Number of 32-bit words to be check or appended */ ++ /* by the authentication module */ ++ unsigned int : 1; ++ unsigned int auth_algorithm : 3; ++ unsigned int auth_mode : 1; /* 0-Append or 1-Check Authentication Result */ ++ unsigned int fcs_stream_copy : 1; /* enable authentication stream copy */ ++ unsigned int : 2; ++ unsigned int mix_key_sel : 1; /* 0:use rCipherKey0-3 1:use Key Mixer */ ++ unsigned int aesnk : 4; /* AES Key Size */ ++ unsigned int cipher_algorithm : 3; ++ unsigned int : 1; ++ unsigned int op_mode : 4; /* Operation Mode for the IPSec Module */ ++#endif ++ } bits; ++} IPSEC_CONTROL_T; ++ ++ ++typedef union ++{ ++ unsigned int cipher_packet; ++ struct bit_0008 ++ { ++#if (BIG_ENDIAN==1) ++ unsigned int cipher_header_len : 16; /* The header length to be skipped by the cipher */ ++ unsigned int cipher_algorithm_len : 16; /* The length of message body to be encrypted/decrypted */ ++#else ++ unsigned int cipher_algorithm_len : 16; /* The length of message body to be encrypted/decrypted */ ++ unsigned int cipher_header_len : 16; /* The header length to be skipped by the cipher */ ++#endif ++ } bits; ++} IPSEC_CIPHER_PACKET_T; ++ ++typedef union ++{ ++ unsigned int auth_packet; ++ struct bit_000c ++ { ++#if (BIG_ENDIAN==1) ++ unsigned int auth_header_len : 16; /* The header length that is to be skipped by the authenticator */ ++ unsigned int auth_algorithm_len : 16; /* The length of message body that is to be authenticated */ ++#else ++ unsigned int auth_algorithm_len : 16; /* The length of message body that is to be authenticated */ ++ unsigned int auth_header_len : 16; /* The header length that is to be skipped by the authenticator */ ++#endif ++ } bits; ++} IPSEC_AUTH_PACKET_T; ++ ++typedef union ++{ ++ unsigned int status; ++ struct bit_00a8 ++ { ++#if (BIG_ENDIAN==1) ++ unsigned int auth_cmp_rslt : 1; /* Authentication Compare result */ ++ unsigned int wep_crc_ok : 1; /* WEP ICV compare result */ ++ unsigned int tkip_mic_ok : 1; /* TKIP Mic compare result */ ++ unsigned int ccm_mic_ok : 1; /* CCM Mic compare result */ ++ unsigned int : 16; ++ unsigned int parser_err_code: 4; /* Authentication Compare result */ ++ unsigned int auth_err_code : 4; /* Authentication module error code */ ++ unsigned int cipher_err_code: 4; /* Cipher module erroe code */ ++#else ++ unsigned int cipher_err_code: 4; /* Cipher module erroe code */ ++ unsigned int auth_err_code : 4; /* Authentication module error code */ ++ unsigned int parser_err_code: 4; /* Authentication Compare result */ ++ unsigned int : 16; ++ unsigned int ccm_mic_ok : 1; /* CCM Mic compare result */ ++ unsigned int tkip_mic_ok : 1; /* TKIP Mic compare result */ ++ unsigned int wep_crc_ok : 1; /* WEP ICV compare result */ ++ unsigned int auth_cmp_rslt : 1; /* Authentication Compare result */ ++#endif ++ } bits; ++} IPSEC_STATUS_T; ++ ++ ++ ++/************************************************************************/ ++/* IPSec Descriptor Format */ ++/************************************************************************/ ++typedef struct descriptor_t ++{ ++ union frame_control_t ++ { ++ unsigned int bits32; ++ struct bits_0000 ++ { ++#if (BIG_ENDIAN==1) ++ unsigned int own : 1; /* owner bit. 0-CPU, 1-DMA */ ++ unsigned int derr : 1; /* data error during processing this descriptor */ ++ unsigned int perr : 1; /* protocol error during processing this descriptor */ ++ unsigned int : 1; /* authentication compare result */ ++ unsigned int : 6; /* checksum[15:8] */ ++ unsigned int desc_count : 6; /* number of descriptors used for the current frame */ ++ unsigned int buffer_size:16; /* transfer buffer size associated with current description*/ ++#else ++ unsigned int buffer_size:16; /* transfer buffer size associated with current description*/ ++ unsigned int desc_count : 6; /* number of descriptors used for the current frame */ ++ unsigned int : 6; /* checksum[15:8] */ ++ unsigned int : 1; /* authentication compare result */ ++ unsigned int perr : 1; /* protocol error during processing this descriptor */ ++ unsigned int derr : 1; /* data error during processing this descriptor */ ++ unsigned int own : 1; /* owner bit. 0-CPU, 1-DMA */ ++#endif ++ } bits; ++ } frame_ctrl; ++ ++ union flag_status_t ++ { ++ unsigned int bits32; ++ struct bits_0004 ++ { ++#if (BIG_ENDIAN==1) ++// unsigned int checksum : 8; /* checksum[7:0] */ ++ unsigned int : 4; ++ unsigned int auth_result: 1; ++ unsigned int wep_crc_ok : 1; ++ unsigned int tkip_mic_ok: 1; ++ unsigned int ccmp_mic_ok: 1; ++ unsigned int process_id : 8; ++ unsigned int frame_count:16; ++#else ++ unsigned int frame_count:16; ++ unsigned int process_id : 8; ++ unsigned int ccmp_mic_ok: 1; ++ unsigned int tkip_mic_ok: 1; ++ unsigned int wep_crc_ok : 1; ++ unsigned int auth_result: 1; ++ unsigned int : 4; ++// unsigned int checksum : 8; /* checksum[7:0] */ ++#endif ++ } bits_rx_status; ++ ++ struct bits_0005 ++ { ++#if (BIG_ENDIAN==1) ++ unsigned int : 8; ++ unsigned int process_id : 8; ++ unsigned int frame_count:16; ++#else ++ unsigned int frame_count:16; ++ unsigned int process_id : 8; ++ unsigned int : 8; ++#endif ++ } bits_tx_status; ++ ++ struct bits_0006 ++ { ++#if (BIG_ENDIAN==1) ++ unsigned int :22; ++ unsigned int tqflag :10; ++#else ++ unsigned int tqflag :10; ++ unsigned int :22; ++#endif ++ } bits_tx_flag; ++ } flag_status; ++ ++ unsigned int buf_adr; /* data buffer address */ ++ ++ union next_desc_t ++ { ++ unsigned int next_descriptor; ++ struct bits_000c ++ { ++#if (BIG_ENDIAN==1) ++ unsigned int ndar :28; /* next descriptor address */ ++ unsigned int eofie : 1; /* end of frame interrupt enable */ ++ unsigned int dec : 1; /* AHB bus address. 0-increment; 1-decrement */ ++ unsigned int sof_eof : 2; /* 00-the linking descriptor 01-the last descriptor of a frame*/ ++ /* 10-the first descriptor of a frame 11-only one descriptor for a frame*/ ++#else ++ unsigned int sof_eof : 2; /* 00-the linking descriptor 01-the last descriptor of a frame*/ ++ /* 10-the first descriptor of a frame 11-only one descriptor for a frame*/ ++ unsigned int dec : 1; /* AHB bus address. 0-increment; 1-decrement */ ++ unsigned int eofie : 1; /* end of frame interrupt enable */ ++ unsigned int ndar :28; /* next descriptor address */ ++#endif ++ } bits; ++ } next_desc; ++} IPSEC_DESCRIPTOR_T; ++ ++ ++typedef struct IPSEC_S ++{ ++ unsigned char *tx_bufs; ++ unsigned char *rx_bufs; ++ IPSEC_DESCRIPTOR_T *tx_desc; /* point to virtual TX descriptor address*/ ++ IPSEC_DESCRIPTOR_T *rx_desc; /* point to virtual RX descriptor address*/ ++ IPSEC_DESCRIPTOR_T *tx_cur_desc; /* point to current TX descriptor */ ++ IPSEC_DESCRIPTOR_T *rx_cur_desc; /* point to current RX descriptor */ ++ IPSEC_DESCRIPTOR_T *tx_finished_desc; ++ IPSEC_DESCRIPTOR_T *rx_finished_desc; ++ dma_addr_t rx_desc_dma; /* physical RX descriptor address */ ++ dma_addr_t tx_desc_dma; /* physical TX descriptor address */ ++ dma_addr_t rx_bufs_dma; /* physical RX descriptor address */ ++ dma_addr_t tx_bufs_dma; /* physical TX descriptor address */ ++} IPSEC_T; ++ ++ ++/*=====================================================================================================*/ ++/* Data Structure of IPSEC Control Packet */ ++/*=====================================================================================================*/ ++typedef struct IPSEC_ECB_AUTH_S ++{ ++ IPSEC_CONTROL_T control; /* control parameter */ ++ IPSEC_CIPHER_PACKET_T cipher; /* cipher packet parameter */ ++ IPSEC_AUTH_PACKET_T auth; /* authentication packet parameter */ ++ unsigned char cipher_key[8*4]; ++ unsigned char auth_check_val[5*4]; ++} IPSEC_ECB_AUTH_T; ++ ++typedef struct IPSEC_CBC_AUTH_S ++{ ++ IPSEC_CONTROL_T control; /* control parameter */ ++ IPSEC_CIPHER_PACKET_T cipher; /* cipher packet parameter */ ++ IPSEC_AUTH_PACKET_T auth; /* authentication packet parameter */ ++ unsigned char cipher_iv[4*4]; ++ unsigned char cipher_key[8*4]; ++ unsigned char auth_check_val[5*4]; ++} IPSEC_CBC_AUTH_T; ++ ++typedef struct IPSEC_ECB_HMAC_AUTH_S ++{ ++ IPSEC_CONTROL_T control; /* control parameter */ ++ IPSEC_CIPHER_PACKET_T cipher; /* cipher packet parameter */ ++ IPSEC_AUTH_PACKET_T auth; /* authentication packet parameter */ ++ unsigned char cipher_key[8*4]; ++ unsigned char auth_key[16*4]; ++ unsigned char auth_check_val[5*4]; ++} IPSEC_ECB_AUTH_HMAC_T; ++ ++typedef struct IPSEC_CBC_HMAC_AUTH_S ++{ ++ IPSEC_CONTROL_T control; /* control parameter */ ++ IPSEC_CIPHER_PACKET_T cipher; /* cipher packet parameter */ ++ IPSEC_AUTH_PACKET_T auth; /* authentication packet parameter */ ++ unsigned char cipher_iv[4*4]; ++ unsigned char cipher_key[8*4]; ++ unsigned char auth_key[16*4]; ++ unsigned char auth_check_val[5*4]; ++} IPSEC_CBC_AUTH_HMAC_T; ++ ++typedef struct IPSEC_HMAC_AUTH_S ++{ ++ IPSEC_CONTROL_T control; /* control parameter */ ++ IPSEC_AUTH_PACKET_T auth; /* authentication packet parameter */ ++ unsigned char auth_key[16*4]; ++ unsigned char auth_check_val[5*4]; ++} IPSEC_HMAC_AUTH_T; ++ ++typedef union ++{ ++ unsigned char auth_pkt[28]; ++ ++ struct IPSEC_AUTH_S ++ { ++ IPSEC_CONTROL_T control; /* control parameter(4-byte) */ ++ IPSEC_AUTH_PACKET_T auth; /* authentication packet parameter(4-byte) */ ++ unsigned char auth_check_val[5*4]; ++ } var; ++} IPSEC_AUTH_T; ++ ++typedef struct IPSEC_CIPHER_CBC_S ++{ ++ IPSEC_CONTROL_T control; /* control parameter */ ++ IPSEC_CIPHER_PACKET_T cipher; /* cipher packet parameter */ ++ unsigned char cipher_iv[4*4]; ++ unsigned char cipher_key[8*4]; ++} IPSEC_CIPHER_CBC_T; ++ ++typedef struct IPSEC_CIPHER_ECB_S ++{ ++ IPSEC_CONTROL_T control; /* control parameter */ ++ IPSEC_CIPHER_PACKET_T cipher; /* cipher packet parameter */ ++ unsigned char cipher_key[8*4]; ++} IPSEC_CIPHER_ECB_T; ++ ++ ++/**************************************************************************** ++ * Structure Definition * ++ ****************************************************************************/ ++struct IPSEC_PACKET_S ++{ ++ unsigned int op_mode; /* CIPHER_ENC(1),CIPHER_DEC(3),AUTH(4),ENC_AUTH(5),AUTH_DEC(7) */ ++ unsigned int cipher_algorithm; /* ECB_DES(0),ECB_3DES(1),ECB_AES(2),CBC_DES(4),CBC_3DES(5),CBC_AES(6) */ ++ unsigned int auth_algorithm; /* SHA1(0),MD5(1),HMAC_SHA1(2),HMAC_MD5(3),FCS(4) */ ++ unsigned int auth_result_mode; /* AUTH_APPEND(0),AUTH_CHKVAL(1) */ ++ unsigned int process_id; /* Used to identify the process */ ++ unsigned int auth_header_len; /* Header length to be skipped by the authenticator */ ++ unsigned int auth_algorithm_len; /* Length of message body that is to be authenticated */ ++ unsigned int cipher_header_len; /* Header length to be skipped by the cipher */ ++ unsigned int cipher_algorithm_len; /* Length of message body to be encrypted or decrypted */ ++ unsigned char iv[16]; /* Initial vector used for DES,3DES,AES */ ++ unsigned int iv_size; /* Initial vector size */ ++ unsigned char auth_key[64]; /* authentication key */ ++ unsigned int auth_key_size; /* authentication key size */ ++ unsigned char cipher_key[32]; /* cipher key */ ++ unsigned int cipher_key_size; /* cipher key size */ ++ struct scatterlist *in_packet; /* input_packet buffer pointer */ ++ //unsigned char *in_packet; /* input_packet buffer pointer */ ++ unsigned int pkt_len; /* input total packet length */ ++ unsigned char auth_checkval[20]; /* Authentication check value/FCS check value */ ++ struct IPSEC_PACKET_S *next,*prev; /* pointer to next/previous operation to perform on buffer */ ++ void (*callback)(struct IPSEC_PACKET_S *); /* function to call when done authentication/cipher */ ++ unsigned char *out_packet; /* output_packet buffer pointer */ ++ //struct scatterlist *out_packet; /* output_packet buffer pointer */ ++ unsigned int out_pkt_len; /* output total packet length */ ++ unsigned int auth_cmp_result; /* authentication compare result */ ++ unsigned int checksum; /* checksum value */ ++ unsigned int status; /* ipsec return status. 0:success, others:fail */ ++#if (IPSEC_TEST == 1) ++ unsigned char *sw_packet; /* for test only */ ++ unsigned int sw_pkt_len; /* for test only */ ++#endif ++} ; ++ ++/***************************************************************************** ++ * Function : ipsec_crypto_hw_process ++ * Description : This function processes H/W authentication and cipher. ++ * Input : op_info - the authentication and cipher information for IPSec module. ++ * Output : none. ++ * Return : 0 - success, others - failure. ++ *****************************************************************************/ ++int ipsec_crypto_hw_process(struct IPSEC_PACKET_S *op_info); ++ ++int ipsec_get_cipher_algorithm(unsigned char *alg_name,unsigned int alg_mode); ++int ipsec_get_auth_algorithm(unsigned char *alg_name,unsigned int alg_mode); ++#if 0 ++void ipsec_sw_authentication(char *data,unsigned int data_len,char *authkey,char authAlgorithm,char *auth_result); ++void ipsec_sw_cipher(unsigned char *pt,unsigned int pt_len, unsigned char *cipher_key, unsigned int key_size, ++ unsigned char *iv,unsigned int cipherAlgorithm,unsigned char *ct); ++void ipsec_sw_auth_cipher(unsigned int op_mode,char *data,unsigned int data_len, ++ BYTE *auth_key,char authAlgorithm,char *auth_result, ++ char *pt, unsigned int pt_len,char *cipher_key, int key_size, ++ char *iv, char cipherAlgorithm,char *ct); ++#endif ++ ++ ++#endif +--- /dev/null ++++ b/include/asm-arm/arch-sl2312/sl_random.h +@@ -0,0 +1,2 @@ ++#define RANDOM_ADD (IO_ADDRESS (0x051000000) + 0x0AC) ++ +--- /dev/null ++++ b/include/asm-arm/arch-sl2312/system.h +@@ -0,0 +1,54 @@ ++/* ++ * linux/include/asm-arm/arch-sl2312/system.h ++ * ++ * Copyright (C) 1999 ARM Limited ++ * Copyright (C) 2000 Deep Blue Solutions Ltd ++ * Copyright (C) 2001 Altera Corporation ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; either version 2 of the License, or ++ * (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA ++ */ ++#ifndef __ASM_ARCH_SYSTEM_H ++#define __ASM_ARCH_SYSTEM_H ++ ++#include ++#include ++#include ++#include ++ ++static void arch_idle(void) ++{ ++ /* ++ * This should do all the clock switching ++ * and wait for interrupt tricks ++ */ ++ cpu_do_idle(); ++} ++ ++extern __inline__ void arch_reset(char mode) ++{ ++ __raw_writel( (int) GLOBAL_RESET|RESET_CPU1, IO_ADDRESS(SL2312_GLOBAL_BASE) + GLOBAL_RESET_REG); ++} ++ ++ ++void (*pm_power_off)(void); ++//{ ++// printk("arch_power_off\n"); ++ ++ // Power off ++// __raw_writel( (int) 0x00000001, IO_ADDRESS(SL2312_POWER_CTRL_BASE) + 0x04); ++ ++//} ++ ++#endif +--- /dev/null ++++ b/include/asm-arm/arch-sl2312/timer.h +@@ -0,0 +1,53 @@ ++/* ++ * ++ * This file contains the register definitions for the Excalibur ++ * Timer TIMER00. ++ * ++ * Copyright (C) 2001 Altera Corporation ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; either version 2 of the License, or ++ * (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA ++ */ ++#ifndef __TIMER_H ++#define __TIMER_H ++ ++/* ++ * Register definitions for the timers ++ */ ++ ++#define TIMER_COUNT(BASE_ADDR) (TIMER_TYPE (BASE_ADDR + 0x00 )) ++#define TIMER_LOAD(BASE_ADDR) (TIMER_TYPE (BASE_ADDR + 0x04 )) ++#define TIMER_MATCH1(BASE_ADDR) (TIMER_TYPE (BASE_ADDR + 0x08 )) ++#define TIMER_MATCH2(BASE_ADDR) (TIMER_TYPE (BASE_ADDR + 0x0C )) ++#define TIMER_CR(BASE_ADDR) (TIMER_TYPE (BASE_ADDR + 0x30 )) ++#define TIMER_1_CR_ENABLE_MSK (0x00000001) ++#define TIMER_1_CR_ENABLE_OFST (0) ++#define TIMER_1_CR_CLOCK_MSK (0x00000002) ++#define TIMER_1_CR_CLOCK_OFST (1) ++#define TIMER_1_CR_INT_MSK (0x00000004) ++#define TIMER_1_CR_INT_OFST (2) ++#define TIMER_2_CR_ENABLE_MSK (0x00000008) ++#define TIMER_2_CR_ENABLE_OFST (3) ++#define TIMER_2_CR_CLOCK_MSK (0x00000010) ++#define TIMER_2_CR_CLOCK_OFST (4) ++#define TIMER_2_CR_INT_MSK (0x00000020) ++#define TIMER_2_CR_INT_OFST (5) ++#define TIMER_3_CR_ENABLE_MSK (0x00000040) ++#define TIMER_3_CR_ENABLE_OFST (6) ++#define TIMER_3_CR_CLOCK_MSK (0x00000080) ++#define TIMER_3_CR_CLOCK_OFST (7) ++#define TIMER_3_CR_INT_MSK (0x00000100) ++#define TIMER_3_CR_INT_OFST (8) ++ ++#endif /* __TIMER00_H */ +--- /dev/null ++++ b/include/asm-arm/arch-sl2312/timex.h +@@ -0,0 +1,29 @@ ++/* ++ * linux/include/asm-arm/arch-epxa10db/timex.h ++ * ++ * Excalibur timex specifications ++ * ++ * Copyright (C) 2001 Altera Corporation ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; either version 2 of the License, or ++ * (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA ++ */ ++ ++/* ++ * ?? ++ */ ++#include ++ ++#define CLOCK_TICK_RATE APB_CLK ++ +--- /dev/null ++++ b/include/asm-arm/arch-sl2312/uart.h +@@ -0,0 +1,100 @@ ++/* * ++ * Copyright (C) 2001 Altera Corporation ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; either version 2 of the License, or ++ * (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA ++ */ ++#ifndef __UART_H ++#define __UART_H ++ ++/* ++ * Register definitions for the UART ++ */ ++ ++#define UART_TX_FIFO_SIZE (15) ++ ++#define UART_RBR(BASE_ADDR) (UART_TYPE (BASE_ADDR + 0x00)) // read ++#define UART_THR(BASE_ADDR) (UART_TYPE (BASE_ADDR + 0x00)) // write ++#define UART_IER(BASE_ADDR) (UART_TYPE (BASE_ADDR + 0x04)) ++#define UART_IER_MS (0x08) ++#define UART_IER_RLS (0x04) ++#define UART_IER_TE (0x02) ++#define UART_IER_DR (0x01) ++#define UART_IIR(BASE_ADDR) (UART_TYPE (BASE_ADDR + 0x08)) // read ++#define UART_IIR_NONE (0x01) /* No interrupt pending */ ++#define UART_IIR_RLS (0x06) /* Receive Line Status */ ++#define UART_IIR_DR (0x04) /* Receive Data Ready */ ++#define UART_IIR_TIMEOUT (0x0c) /* Receive Time Out */ ++#define UART_IIR_TE (0x02) /* THR Empty */ ++#define UART_IIR_MODEM (0x00) /* Modem Status */ ++#define UART_FCR(BASE_ADDR) (UART_TYPE (BASE_ADDR + 0x08)) // write ++#define UART_FCR_FE (0x01) /* FIFO Enable */ ++#define UART_FCR_RXFR (0x02) /* Rx FIFO Reset */ ++#define UART_FCR_TXFR (0x04) /* Tx FIFO Reset */ ++#define UART_FCR_FIFO_1C (0x00) ++#define UART_FCR_FIFO_4C (0x40) ++#define UART_FCR_FIFO_8C (0x80) ++#define UART_FCR_FIFO_14C (0xC0) ++#define UART_LCR(BASE_ADDR) (UART_TYPE (BASE_ADDR + 0x0C)) ++#define UART_LCR_MSK (0x03) ++#define UART_LCR_LEN5 (0x00) ++#define UART_LCR_LEN6 (0x01) ++#define UART_LCR_LEN7 (0x02) ++#define UART_LCR_LEN8 (0x03) ++#define UART_LCR_STOP (0x04) ++#define UART_LCR_EVEN (0x18) /* Even Parity */ ++#define UART_LCR_ODD (0x08) /* Odd Parity */ ++#define UART_LCR_PE (0x08) /* Parity Enable */ ++#define UART_LCR_SETBREAK (0x40) /* Set Break condition */ ++#define UART_LCR_STICKPARITY (0x20) /* Stick Parity Enable */ ++#define UART_LCR_DLAB (0x80) /* Divisor Latch Access Bit */ ++#define UART_MCR(BASE_ADDR) (UART_TYPE (BASE_ADDR + 0x10)) ++#define UART_MCR_DTR (0x1) /* Data Terminal Ready */ ++#define UART_MCR_RTS (0x2) /* Request to Send */ ++#define UART_MCR_OUT1 (0x4) /* output 1 */ ++#define UART_MCR_OUT2 (0x8) /* output2 or global interrupt enable */ ++#define UART_MCR_LPBK (0x10) /* loopback mode */ ++#define UART_MCR_MASK (0xE3) ++#define UART_LSR(BASE_ADDR) (UART_TYPE (BASE_ADDR + 0x14)) ++#define UART_LSR_DR (0x01) /* Data Ready */ ++#define UART_LSR_OE (0x02) /* Overrun Error */ ++#define UART_LSR_PE (0x04) /* Parity Error */ ++#define UART_LSR_FE (0x08) /* Framing Error */ ++#define UART_LSR_BI (0x10) /* Break Interrupt */ ++#define UART_LSR_THRE (0x20) /* THR Empty */ ++#define UART_LSR_TE (0x40) /* Transmitte Empty */ ++#define UART_LSR_DE (0x80) /* FIFO Data Error */ ++#define UART_MSR(BASE_ADDR) (UART_TYPE (BASE_ADDR + 0x18)) ++#define UART_MSR_DELTACTS (0x01) /* Delta CTS */ ++#define UART_MSR_DELTADSR (0x02) /* Delta DSR */ ++#define UART_MSR_TERI (0x04) /* Trailing Edge RI */ ++#define UART_MSR_DELTACD (0x08) /* Delta CD */ ++#define UART_MSR_CTS (0x10) /* Clear To Send */ ++#define UART_MSR_DSR (0x20) /* Data Set Ready */ ++#define UART_MSR_RI (0x40) /* Ring Indicator */ ++#define UART_MSR_DCD (0x80) /* Data Carrier Detect */ ++#define UART_SPR(BASE_ADDR) (UART_TYPE (BASE_ADDR + 0x1C)) ++#define UART_DIV_LO(BASE_ADDR) (UART_TYPE (BASE_ADDR + 0x0)) ++#define UART_DIV_HI(BASE_ADDR) (UART_TYPE (BASE_ADDR + 0x4)) ++#define UART_PSR(BASE_ADDR) (UART_TYPE (BASE_ADDR + 0x8)) ++#define UART_MDR(BASE_ADDR) (UART_TYPE (BASE_ADDR + 0x20)) ++#define UART_MDR_SERIAL (0x0) ++ ++#define UART_MSR_DDCD 0x08 /* Delta DCD */ ++#define UART_MSR_DDSR 0x02 /* Delta DSR */ ++#define UART_MSR_DCTS 0x01 /* Delta CTS */ ++#define UART_MSR_ANY_DELTA 0x0F /* Any of the delta bits! */ ++ ++ ++#endif /* __UART_H */ +--- /dev/null ++++ b/include/asm-arm/arch-sl2312/uncompress.h +@@ -0,0 +1,94 @@ ++/* ++ * linux/include/asm-arm/arch-epxa10db/uncompress.h ++ * ++ * Copyright (C) 1999 ARM Limited ++ * Copyright (C) 2001 Altera Corporation ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; either version 2 of the License, or ++ * (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA ++ */ ++#include "asm/arch/platform.h" ++#include "asm/arch/hardware.h" ++#define UART_TYPE (volatile unsigned int*) ++#ifndef CONFIG_SERIAL_IT8712 ++#include "asm/arch/uart.h" ++#endif ++extern unsigned int it8712_uart_base; ++ ++/* ++ * This does not append a newline ++ */ ++static void putstr(const char *s) ++{ ++ ++#ifdef CONFIG_SERIAL_IT8712 ++ ++ unsigned char *base,*status,stat; ++ int i ; ++ ++ status = (unsigned char*)it8712_uart_base + 5; ++ base = (unsigned char*)it8712_uart_base ; ++ ++ while (*s) { ++ ++ stat = *status; ++ while (!(stat&0x20)) { // check status ++ for(i=0;i<0x10;i++) ; ++ status = (unsigned char*)it8712_uart_base + 5; ++ stat = *status ; ++ } ++ ++ *base = *s; ++ barrier(); ++ ++ if (*s == '\n') { ++ stat = *status; ++ while (!(stat&0x20)) { // check status ++ for(i=0;i<0x10;i++) ; ++ status = (unsigned char*)it8712_uart_base + 5; ++ stat = *status ; ++ } ++ ++ barrier(); ++ *base = '\r'; ++ } ++ s++; ++ } ++ ++#else ++ while (*s) { ++ while (!(*UART_LSR(SL2312_UART_BASE) & ++ UART_LSR_THRE)); ++ barrier(); ++ ++ *UART_THR(SL2312_UART_BASE) = *s; ++ ++ if (*s == '\n') { ++ while (!(*UART_LSR(SL2312_UART_BASE) & ++ UART_LSR_THRE)); ++ barrier(); ++ ++ *UART_THR(SL2312_UART_BASE) = '\r'; ++ } ++ s++; ++ } ++#endif ++} ++ ++/* ++ * nothing to do ++ */ ++#define arch_decomp_setup() ++ ++#define arch_decomp_wdog() +--- /dev/null ++++ b/include/asm-arm/arch-sl2312/vmalloc.h +@@ -0,0 +1,36 @@ ++/* ++ * linux/include/asm-arm/arch-epxa10db/vmalloc.h ++ * ++ * Copyright (C) 2000 Russell King. ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; either version 2 of the License, or ++ * (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA ++ */ ++ ++/* ++ * Just any arbitrary offset to the start of the vmalloc VM area: the ++ * current 8MB value just means that there will be a 8MB "hole" after the ++ * physical memory until the kernel virtual memory starts. That means that ++ * any out-of-bounds memory accesses will hopefully be caught. ++ * The vmalloc() routines leaves a hole of 4kB between each vmalloced ++ * area for the same reason. ;) ++ */ ++#define VMALLOC_OFFSET (8*1024*1024) ++#define VMALLOC_START (((unsigned long)high_memory + VMALLOC_OFFSET) & ~(VMALLOC_OFFSET-1)) ++#define VMALLOC_VMADDR(x) ((unsigned long)(x)) ++#define VMALLOC_END (PAGE_OFFSET + 0x10000000) ++ ++//#define MODULE_START (PAGE_OFFSET - 16*1048576) ++//#define MODULE_END (PAGE_OFFSET) ++ +--- /dev/null ++++ b/include/asm-arm/arch-sl2312/watchdog.h +@@ -0,0 +1,58 @@ ++#ifndef __WATCHDOG_H ++#define __WATCHDOG_H ++ ++#define WATCHDOG_BASE (IO_ADDRESS (SL2312_WAQTCHDOG_BASE)) ++#define WATCHDOG_COUNTER (WATCHDOG_BASE + 0x00) ++#define WATCHDOG_LOAD (WATCHDOG_BASE + 0x04) ++#define WATCHDOG_RESTART (WATCHDOG_BASE + 0x08) ++#define WATCHDOG_CR (WATCHDOG_BASE + 0x0C) ++#define WATCHDOG_STATUS (WATCHDOG_BASE + 0x10) ++#define WATCHDOG_CLEAR (WATCHDOG_BASE + 0x14) ++#define WATCHDOG_INTRLEN (WATCHDOG_BASE + 0x18) ++ ++#define WATCHDOG_WDENABLE_MSK (0x00000001) ++#define WATCHDOG_WDENABLE_OFST (0) ++#define WATCHDOG_WDRST_MSK (0x00000002) ++#define WATCHDOG_WDRST_OFST (1) ++#define WATCHDOG_WDINTR_MSK (0x00000004) ++#define WATCHDOG_WDINTR_OFST (2) ++#define WATCHDOG_WDEXT_MSK (0x00000008) ++#define WATCHDOG_WDEXT_OFST (3) ++#define WATCHDOG_WDCLOCK_MSK (0x00000010) ++#define WATCHDOG_WDCLOCK_OFST (4) ++#define WATCHDOG_CR_MASK (0x0000001F) ++ ++#define WATCHDOG_CLEAR_STATUS 0x1 ++#define WATCHDOG_ENABLE 1 ++#define WATCHDOG_DISABLE 0 ++#define WATCHDOG_RESTART_VALUE 0x5AB9 ++ ++#define WATCHDOG_MINOR 130 ++ ++#define WATCHDOG_IOCTRL_DISABLE 0x01 ++#define WATCHDOG_IOCTRL_SETTIME 0x02 ++#define WATCHDOG_IOCTRL_ENABLE 0x03 ++#define WATCHDOG_IOCTRL_RESTART 0x04 ++ ++#define WATCHDOG_TIMEOUT_SCALE APB_CLK ++#define WATCHDOG_TIMEOUT_MARGIN 30 ++#define WATCHDOG_DRIVER_OPEN 1 ++#define WATCHDOG_DRIVER_CLOSE 0 ++ ++ ++static void watchdog_disable(void); ++static void watchdog_enable(void); ++static int watchdog_open(struct inode *, struct file *); ++static int watchdog_release(struct inode *, struct file *); ++static ssize_t watchdog_read(struct file *, char *, size_t, loff_t *); ++static ssize_t watchdog_write(struct file *, const char *, size_t, loff_t *); ++static int watchdog_ioctl(struct inode *, struct file *, unsigned int, unsigned long); ++#ifdef WATCHDOG_TEST ++static void watchdog_fire(int, void *, struct pt_regs *); ++#endif ++ ++ ++ ++ ++ ++#endif +--- /dev/null ++++ b/include/asm-arm/arch-sl2312/xor.h +@@ -0,0 +1,29 @@ ++/* ++ * include/asm-arm/arch-sl2312/xor.h ++ * ++ * Copyright (C) 2005 Storlink Corp. ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++ */ ++ ++#ifndef _ASM_ARCH_XOR_H ++#define _ASM_ARCH_XOR_H ++ ++/* ++ * Function prototypes ++ */ ++void xor_gemini_2(unsigned long bytes, unsigned long *p1, unsigned long *p2); ++ ++void xor_gemini_3(unsigned long bytes, unsigned long *p1, unsigned long *p2, ++ unsigned long *p3); ++ ++void xor_gemini_4(unsigned long bytes, unsigned long *p1, unsigned long *p2, ++ unsigned long *p3, unsigned long *p4); ++ ++void xor_gemini_5(unsigned long bytes, unsigned long *p1, unsigned long *p2, ++ unsigned long *p3, unsigned long *p4, unsigned long *p5); ++ ++#endif /* _ASM_ARCH_XOR_H */ ++ +--- a/include/asm-arm/cacheflush.h ++++ b/include/asm-arm/cacheflush.h +@@ -46,6 +46,18 @@ + # define MULTI_CACHE 1 + #endif + ++/*********************************************************************** ++ * Storlink SoC -- Cache ++ ***********************************************************************/ ++#if defined(CONFIG_CPU_FA526) ++# ifdef _CACHE ++# define MULTI_CACHE 1 ++# else ++# define _CACHE fa ++# endif ++#endif ++/***********************************************************************/ ++ + #if defined(CONFIG_CPU_ARM926T) + # ifdef _CACHE + # define MULTI_CACHE 1 +--- a/include/asm-arm/page.h ++++ b/include/asm-arm/page.h +@@ -74,6 +74,18 @@ + # endif + #endif + ++/*********************************************************************** ++ * Storlink SoC -- flash ++ ***********************************************************************/ ++#ifdef CONFIG_CPU_COPY_FA ++# ifdef _USER ++# define MULTI_USER 1 ++# else ++# define _USER fa ++# endif ++#endif ++/***********************************************************************/ ++ + #ifdef CONFIG_CPU_SA1100 + # ifdef _USER + # define MULTI_USER 1 +--- a/include/asm-arm/proc-fns.h ++++ b/include/asm-arm/proc-fns.h +@@ -89,6 +89,14 @@ + # define CPU_NAME cpu_arm922 + # endif + # endif ++# ifdef CONFIG_CPU_FA526 ++# ifdef CPU_NAME ++# undef MULTI_CPU ++# define MULTI_CPU ++# else ++# define CPU_NAME cpu_fa526 ++# endif ++# endif + # ifdef CONFIG_CPU_ARM925T + # ifdef CPU_NAME + # undef MULTI_CPU +--- a/include/asm-arm/tlbflush.h ++++ b/include/asm-arm/tlbflush.h +@@ -39,6 +39,8 @@ + #define TLB_V6_D_ASID (1 << 17) + #define TLB_V6_I_ASID (1 << 18) + ++#define TLB_DINVAL (1 << 28) ++#define TLB_BTB (1 << 29) + #define TLB_DCLEAN (1 << 30) + #define TLB_WB (1 << 31) + +@@ -52,6 +54,7 @@ + * v4wb - ARMv4 with write buffer without I TLB flush entry instruction + * v4wbi - ARMv4 with write buffer with I TLB flush entry instruction + * v6wbi - ARMv6 with write buffer with I TLB flush entry instruction ++ * fa - ARMv4 with write buffer with UTLB and branch target buffer (BTB) + */ + #undef _TLB + #undef MULTI_TLB +@@ -86,6 +89,44 @@ + # define v4_always_flags (-1UL) + #endif + ++#ifdef CONFIG_CPU_FA_BTB ++#define __TLB_BTB TLB_BTB ++#else ++#define __TLB_BTB 0 ++#endif ++ ++#ifdef CONFIG_CPU_FA_WB_DISABLE ++#define __TLB_WB 0 ++#else ++#define __TLB_WB TLB_WB ++#endif ++ ++/* Fix buggy CPU which doesn't invalidate Dcache properly */ ++#ifdef CONFIG_CPU_FA520 ++#define __TLB_DINVAL TLB_DINVAL ++#elif defined(CONFIG_CPU_FA526) ++//#define __TLB_DINVAL TLB_DINVAL ++#define __TLB_DINVAL 0 ++#else ++#define __TLB_DINVAL 0 ++#endif ++ ++#define fa_tlb_flags (__TLB_WB | __TLB_BTB | __TLB_DINVAL | TLB_DCLEAN | \ ++ TLB_V4_U_FULL | TLB_V4_U_PAGE) ++ ++#ifdef CONFIG_CPU_TLB_FA ++# define fa_possible_flags fa_tlb_flags ++# define fa_always_flags fa_tlb_flags ++# ifdef _TLB ++# define MULTI_TLB 1 ++# else ++# define _TLB fa ++# endif ++#else ++# define fa_possible_flags 0 ++# define fa_always_flags (-1UL) ++#endif ++ + #define v4wbi_tlb_flags (TLB_WB | TLB_DCLEAN | \ + TLB_V4_I_FULL | TLB_V4_D_FULL | \ + TLB_V4_I_PAGE | TLB_V4_D_PAGE) +@@ -246,12 +287,14 @@ + v4_possible_flags | \ + v4wbi_possible_flags | \ + v4wb_possible_flags | \ ++ fa_possible_flags | \ + v6wbi_possible_flags) + + #define always_tlb_flags (v3_always_flags & \ + v4_always_flags & \ + v4wbi_always_flags & \ + v4wb_always_flags & \ ++ fa_always_flags & \ + v6wbi_always_flags) + + #define tlb_flag(f) ((always_tlb_flags & (f)) || (__tlb_flag & possible_tlb_flags & (f))) +@@ -261,6 +304,9 @@ + const int zero = 0; + const unsigned int __tlb_flag = __cpu_tlb_flags; + ++ if (tlb_flag(TLB_DINVAL)) ++ asm("mcr%? p15, 0, %0, c7, c14, 0" : : "r" (zero)); ++ + if (tlb_flag(TLB_WB)) + dsb(); + +@@ -281,6 +327,13 @@ + dsb(); + isb(); + } ++ ++ if (tlb_flag(TLB_BTB)) ++ { ++ asm("mcr%? p15, 0, %0, c7, c5, 6" : : "r" (zero)); ++ asm("mov r0, r0" : : ); ++ asm("mov r0, r0" : : ); ++ } + } + + static inline void local_flush_tlb_mm(struct mm_struct *mm) +@@ -289,6 +342,9 @@ + const int asid = ASID(mm); + const unsigned int __tlb_flag = __cpu_tlb_flags; + ++ if (tlb_flag(TLB_DINVAL)) ++ asm("mcr%? p15, 0, %0, c7, c14, 0" : : "r" (zero)); ++ + if (tlb_flag(TLB_WB)) + dsb(); + +@@ -317,6 +373,14 @@ + asm("mcr p15, 0, %0, c7, c5, 6" : : "r" (zero) : "cc"); + dsb(); + } ++ ++ if (tlb_flag(TLB_BTB)) ++ { ++ asm("mcr%? p15, 0, %0, c7, c5, 6" : : "r" (zero)); ++ asm("mov r0, r0" : : ); ++ asm("mov r0, r0" : : ); ++ } ++ + } + + static inline void +@@ -327,6 +391,9 @@ + + uaddr = (uaddr & PAGE_MASK) | ASID(vma->vm_mm); + ++ if (tlb_flag(TLB_DINVAL)) ++ asm("mcr%? p15, 0, %0, c7, c14, 0" : : "r" (zero)); // clean & invalidate data cache all ++ + if (tlb_flag(TLB_WB)) + dsb(); + +@@ -357,6 +424,13 @@ + asm("mcr p15, 0, %0, c7, c5, 6" : : "r" (zero) : "cc"); + dsb(); + } ++ ++ if (tlb_flag(TLB_BTB)) ++ { ++ asm("mcr%? p15, 0, %0, c7, c5, 6" : : "r" (zero)); ++ asm("mov r0, r0" : : ); ++ asm("mov r0, r0" : : ); ++ } + } + + static inline void local_flush_tlb_kernel_page(unsigned long kaddr) +@@ -366,6 +440,9 @@ + + kaddr &= PAGE_MASK; + ++ if (tlb_flag(TLB_DINVAL)) ++ asm("mcr%? p15, 0, %0, c7, c14, 0" : : "r" (zero)); ++ + if (tlb_flag(TLB_WB)) + dsb(); + +@@ -386,6 +463,12 @@ + asm("mcr p15, 0, %0, c8, c6, 1" : : "r" (kaddr) : "cc"); + if (tlb_flag(TLB_V6_I_PAGE)) + asm("mcr p15, 0, %0, c8, c5, 1" : : "r" (kaddr) : "cc"); ++ if (tlb_flag(TLB_BTB)) ++ { ++ asm("mcr%? p15, 0, %0, c7, c5, 6" : : "r" (zero)); ++ asm("mov r0, r0" : : ); ++ asm("mov r0, r0" : : ); ++ } + + if (tlb_flag(TLB_V6_I_FULL | TLB_V6_D_FULL | + TLB_V6_I_PAGE | TLB_V6_D_PAGE | +@@ -412,6 +495,7 @@ + */ + static inline void flush_pmd_entry(pmd_t *pmd) + { ++ const unsigned int zero = 0; + const unsigned int __tlb_flag = __cpu_tlb_flags; + + if (tlb_flag(TLB_DCLEAN)) +@@ -419,15 +503,30 @@ + : : "r" (pmd) : "cc"); + if (tlb_flag(TLB_WB)) + dsb(); ++ ++ if (tlb_flag(TLB_BTB)) // Luke Lee 05/16/2005 ++ { ++ asm("mcr%? p15, 0, %0, c7, c5, 6" : : "r" (zero)); ++ asm("mov r0, r0" : : ); ++ asm("mov r0, r0" : : ); ++ } + } + + static inline void clean_pmd_entry(pmd_t *pmd) + { ++ const unsigned int zero = 0; // Luke Lee 05/16/2005 ins 1 + const unsigned int __tlb_flag = __cpu_tlb_flags; + + if (tlb_flag(TLB_DCLEAN)) + asm("mcr p15, 0, %0, c7, c10, 1 @ flush_pmd" + : : "r" (pmd) : "cc"); ++ ++ if (tlb_flag(TLB_BTB)) // Luke Lee 05/16/2005 ++ { ++ asm("mcr%? p15, 0, %0, c7, c5, 6" : : "r" (zero)); ++ asm("mov r0, r0" : : ); ++ asm("mov r0, r0" : : ); ++ } + } + + #undef tlb_flag +--- a/include/asm-arm/xor.h ++++ b/include/asm-arm/xor.h +@@ -139,3 +139,18 @@ + xor_speed(&xor_block_8regs); \ + xor_speed(&xor_block_32regs); \ + } while (0) ++ ++#ifdef CONFIG_GEMINI_XOR_ACCE ++#include ++static struct xor_block_template xor_block_gemini = { ++ .name = "gemini xor acceleration", ++ .do_2 = xor_gemini_2, ++ .do_3 = xor_gemini_3, ++ .do_4 = xor_gemini_4, ++ .do_5 = xor_gemini_5,}; ++#undef XOR_TRY_TEMPLATES ++#define XOR_TRY_TEMPLATES \ ++ do { \ ++ xor_speed(&xor_block_gemini); \ ++ } while (0) ++#endif +--- a/include/linux/apm_bios.h ++++ b/include/linux/apm_bios.h +@@ -217,4 +217,24 @@ + #define APM_IOC_STANDBY _IO('A', 1) + #define APM_IOC_SUSPEND _IO('A', 2) + ++// add by jason for power control ++struct pwc_ioctl_data { ++ unsigned int action; // sword struct ++ unsigned int data; // stand shutdown time for PWC_SET_SHUT_TIME ++ // stand shutdown source for PWC_WAIT_BTN ++}; ++ ++#define POWEROFF 0x01 ++#define RESTORE_DEFAULT 0x02 ++#define SYSTEM_REBOOT 0x04 ++ ++#define PWR_SRC_CIR 0x10 ++#define PWR_SRC_RTC 0x20 ++#define PWR_SRC_BTN 0x40 ++ ++#define PWC_IOCTL_BASE 'A' // use linux APM ioctl ++#define PWC_SET_SHUT_TIME _IOW('A', 16, struct pwc_ioctl_data) ++#define PWC_WAIT_BTN _IOR('A', 17, struct pwc_ioctl_data) ++#define PWC_SHUTDOWN _IO ('A', 18) ++ + #endif /* LINUX_APM_H */ +--- a/kernel/time.c ++++ b/kernel/time.c +@@ -76,6 +76,7 @@ + * why not move it into the appropriate arch directory (for those + * architectures that need it). + */ ++extern void rtc_set_time_second(unsigned int second); + + asmlinkage long sys_stime(time_t __user *tptr) + { +@@ -87,6 +88,10 @@ + + tv.tv_nsec = 0; + ++#ifdef CONFIG_SL2312_RTC ++ rtc_set_time_second(tv.tv_sec); ++#endif ++ + err = security_settime(&tv, NULL); + if (err) + return err; diff --git a/target/linux/storm/patches/002-gmac.patch b/target/linux/storm/patches/002-gmac.patch new file mode 100644 index 0000000000..d6632ba381 --- /dev/null +++ b/target/linux/storm/patches/002-gmac.patch @@ -0,0 +1,18615 @@ +--- /dev/null ++++ b/drivers/net/sl2312_emac.c +@@ -0,0 +1,4604 @@ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#define BIG_ENDIAN 0 ++ ++#define GMAC_DEBUG 0 ++ ++#define GMAC_PHY_IF 2 ++ ++/* define PHY address */ ++#define HPHY_ADDR 0x01 ++#define GPHY_ADDR 0x02 ++ ++#define CONFIG_ADM_6999 1 ++/* define chip information */ ++#define DRV_NAME "SL2312" ++#define DRV_VERSION "0.1.1" ++#define SL2312_DRIVER_NAME DRV_NAME " Fast Ethernet driver " DRV_VERSION ++ ++/* define TX/RX descriptor parameter */ ++#define MAX_ETH_FRAME_SIZE 1920 ++#define TX_BUF_SIZE MAX_ETH_FRAME_SIZE ++#define TX_DESC_NUM 128 ++#define TX_BUF_TOT_LEN (TX_BUF_SIZE * TX_DESC_NUM) ++#define RX_BUF_SIZE MAX_ETH_FRAME_SIZE ++#define RX_DESC_NUM 256 ++#define RX_BUF_TOT_LEN (RX_BUF_SIZE * RX_DESC_NUM) ++#define MAX_ISR_WORK 20 ++ ++unsigned int int_status = 0; ++ ++/* define GMAC base address */ ++#define GMAC_PHYSICAL_BASE_ADDR (SL2312_GMAC_BASE) ++#define GMAC_BASE_ADDR (IO_ADDRESS(GMAC_PHYSICAL_BASE_ADDR)) ++#define GMAC_GLOBAL_BASE_ADDR (IO_ADDRESS(SL2312_GLOBAL_BASE)) ++ ++#define GMAC0_BASE (IO_ADDRESS(SL2312_GMAC0_BASE)) ++#define GMAC1_BASE (IO_ADDRESS(SL2312_GMAC1_BASE)) ++ ++/* memory management utility */ ++#define DMA_MALLOC(size,handle) pci_alloc_consistent(NULL,size,handle) ++#define DMA_MFREE(mem,size,handle) pci_free_consistent(NULL,size,mem,handle) ++ ++//#define gmac_read_reg(offset) (readl(GMAC_BASE_ADDR + offset)) ++//#define gmac_write_reg(offset,data,mask) writel( (gmac_read_reg(offset)&~mask) |(data&mask),(GMAC_BASE_ADDR+offset)) ++ ++/* define owner bit */ ++#define CPU 0 ++#define DMA 1 ++ ++#define ACTIVE 1 ++#define NONACTIVE 0 ++ ++#define CONFIG_SL_NAPI ++ ++#ifndef CONFIG_SL2312_MPAGE ++#define CONFIG_SL2312_MPAGE ++#endif ++ ++#ifdef CONFIG_SL2312_MPAGE ++#include ++#include ++#include ++#endif ++ ++#ifndef CONFIG_TXINT_DISABLE ++//#define CONFIG_TXINT_DISABLE ++#endif ++ ++enum phy_state ++{ ++ LINK_DOWN = 0, ++ LINK_UP = 1 ++}; ++ ++ ++/* transmit timeout value */ ++#define TX_TIMEOUT (6*HZ) ++ ++/***************************************/ ++/* the offset address of GMAC register */ ++/***************************************/ ++enum GMAC_REGISTER { ++ GMAC_STA_ADD0 = 0x0000, ++ GMAC_STA_ADD1 = 0x0004, ++ GMAC_STA_ADD2 = 0x0008, ++ GMAC_RX_FLTR = 0x000c, ++ GMAC_MCAST_FIL0 = 0x0010, ++ GMAC_MCAST_FIL1 = 0x0014, ++ GMAC_CONFIG0 = 0x0018, ++ GMAC_CONFIG1 = 0x001c, ++ GMAC_CONFIG2 = 0x0020, ++ GMAC_BNCR = 0x0024, ++ GMAC_RBNR = 0x0028, ++ GMAC_STATUS = 0x002c, ++ GMAC_IN_DISCARDS= 0x0030, ++ GMAC_IN_ERRORS = 0x0034, ++ GMAC_IN_MCAST = 0x0038, ++ GMAC_IN_BCAST = 0x003c, ++ GMAC_IN_MAC1 = 0x0040, ++ GMAC_IN_MAC2 = 0x0044 ++}; ++ ++/*******************************************/ ++/* the offset address of GMAC DMA register */ ++/*******************************************/ ++enum GMAC_DMA_REGISTER { ++ GMAC_DMA_DEVICE_ID = 0xff00, ++ GMAC_DMA_STATUS = 0xff04, ++ GMAC_TXDMA_CTRL = 0xff08, ++ GMAC_TXDMA_FIRST_DESC = 0xff0c, ++ GMAC_TXDMA_CURR_DESC = 0xff10, ++ GMAC_RXDMA_CTRL = 0xff14, ++ GMAC_RXDMA_FIRST_DESC = 0xff18, ++ GMAC_RXDMA_CURR_DESC = 0xff1c, ++}; ++ ++/*******************************************/ ++/* the register structure of GMAC */ ++/*******************************************/ ++typedef union ++{ ++ unsigned int bits32; ++ struct bit1_0004 ++ { ++#if (BIG_ENDIAN==1) ++ unsigned int sta_add2_l16 : 16; /* station MAC address2 bits 15 to 0 */ ++ unsigned int sta_add1_h16 : 16; /* station MAC address1 bits 47 to 32 */ ++#else ++ unsigned int sta_add1_h16 : 16; /* station MAC address1 bits 47 to 32 */ ++ unsigned int sta_add2_l16 : 16; /* station MAC address2 bits 15 to 0 */ ++#endif ++ } bits; ++} GMAC_STA_ADD1_T; ++ ++typedef union ++{ ++ unsigned int bits32; ++ struct bit1_000c ++ { ++#if (BIG_ENDIAN==1) ++ unsigned int : 27; ++ unsigned int error : 1; /* enable receive of all error frames */ ++ unsigned int promiscuous : 1; /* enable receive of all frames */ ++ unsigned int broadcast : 1; /* enable receive of broadcast frames */ ++ unsigned int multicast : 1; /* enable receive of multicast frames that pass multicast filter */ ++ unsigned int unicast : 1; /* enable receive of unicast frames that are sent to STA address */ ++#else ++ unsigned int unicast : 1; /* enable receive of unicast frames that are sent to STA address */ ++ unsigned int multicast : 1; /* enable receive of multicast frames that pass multicast filter */ ++ unsigned int broadcast : 1; /* enable receive of broadcast frames */ ++ unsigned int promiscuous : 1; /* enable receive of all frames */ ++ unsigned int error : 1; /* enable receive of all error frames */ ++ unsigned int : 27; ++#endif ++ } bits; ++} GMAC_RX_FLTR_T; ++ ++typedef union ++{ ++ unsigned int bits32; ++ struct bit1_0018 ++ { ++#if (BIG_ENDIAN==1) ++ unsigned int : 10; ++ unsigned int inv_rx_clk : 1; /* Inverse RX Clock */ ++ unsigned int rising_latch : 1; ++ unsigned int rx_tag_remove : 1; /* Remove Rx VLAN tag */ ++ unsigned int ipv6_tss_rx_en : 1; /* IPv6 TSS RX enable */ ++ unsigned int ipv4_tss_rx_en : 1; /* IPv4 TSS RX enable */ ++ unsigned int rgmii_en : 1; /* RGMII in-band status enable */ ++ unsigned int tx_fc_en : 1; /* TX flow control enable */ ++ unsigned int rx_fc_en : 1; /* RX flow control enable */ ++ unsigned int sim_test : 1; /* speed up timers in simulation */ ++ unsigned int dis_col : 1; /* disable 16 collisions abort function */ ++ unsigned int dis_bkoff : 1; /* disable back-off function */ ++ unsigned int max_len : 3; /* maximum receive frame length allowed */ ++ unsigned int adj_ifg : 4; /* adjust IFG from 96+/-56 */ ++ unsigned int : 1; /* reserved */ ++ unsigned int loop_back : 1; /* transmit data loopback enable */ ++ unsigned int dis_rx : 1; /* disable receive */ ++ unsigned int dis_tx : 1; /* disable transmit */ ++#else ++ unsigned int dis_tx : 1; /* disable transmit */ ++ unsigned int dis_rx : 1; /* disable receive */ ++ unsigned int loop_back : 1; /* transmit data loopback enable */ ++ unsigned int : 1; /* reserved */ ++ unsigned int adj_ifg : 4; /* adjust IFG from 96+/-56 */ ++ unsigned int max_len : 3; /* maximum receive frame length allowed */ ++ unsigned int dis_bkoff : 1; /* disable back-off function */ ++ unsigned int dis_col : 1; /* disable 16 collisions abort function */ ++ unsigned int sim_test : 1; /* speed up timers in simulation */ ++ unsigned int rx_fc_en : 1; /* RX flow control enable */ ++ unsigned int tx_fc_en : 1; /* TX flow control enable */ ++ unsigned int rgmii_en : 1; /* RGMII in-band status enable */ ++ unsigned int ipv4_tss_rx_en : 1; /* IPv4 TSS RX enable */ ++ unsigned int ipv6_tss_rx_en : 1; /* IPv6 TSS RX enable */ ++ unsigned int rx_tag_remove : 1; /* Remove Rx VLAN tag */ ++ unsigned int rising_latch : 1; ++ unsigned int inv_rx_clk : 1; /* Inverse RX Clock */ ++ unsigned int : 10; ++#endif ++ } bits; ++} GMAC_CONFIG0_T; ++ ++typedef union ++{ ++ unsigned int bits32; ++ struct bit1_001c ++ { ++#if (BIG_ENDIAN==1) ++ unsigned int : 28; ++ unsigned int buf_size : 4; /* per packet buffer size */ ++#else ++ unsigned int buf_size : 4; /* per packet buffer size */ ++ unsigned int : 28; ++#endif ++ } bits; ++} GMAC_CONFIG1_T; ++ ++typedef union ++{ ++ unsigned int bits32; ++ struct bit1_0020 ++ { ++#if (BIG_ENDIAN==1) ++ unsigned int rel_threshold : 16; /* flow control release threshold */ ++ unsigned int set_threshold : 16; /* flow control set threshold */ ++#else ++ unsigned int set_threshold : 16; /* flow control set threshold */ ++ unsigned int rel_threshold : 16; /* flow control release threshold */ ++#endif ++ } bits; ++} GMAC_CONFIG2_T; ++ ++typedef union ++{ ++ unsigned int bits32; ++ struct bit1_0024 ++ { ++#if (BIG_ENDIAN==1) ++ unsigned int : 16; ++ unsigned int buf_num : 16; /* return buffer number from software */ ++#else ++ unsigned int buf_num : 16; /* return buffer number from software */ ++ unsigned int : 16; ++#endif ++ } bits; ++} GMAC_BNCR_T; ++ ++typedef union ++{ ++ unsigned int bits32; ++ struct bit1_0028 ++ { ++#if (BIG_ENDIAN==1) ++ unsigned int : 16; ++ unsigned int buf_remain : 16; /* remaining buffer number */ ++#else ++ unsigned int buf_remain : 16; /* remaining buffer number */ ++ unsigned int : 16; ++#endif ++ } bits; ++} GMAC_RBNR_T; ++ ++typedef union ++{ ++ unsigned int bits32; ++ struct bit1_002c ++ { ++#if (BIG_ENDIAN==1) ++ unsigned int : 25; ++ unsigned int mii_rmii : 2; /* PHY interface type */ ++ unsigned int phy_mode : 1; /* PHY interface mode in 10M-bps */ ++ unsigned int duplex : 1; /* duplex mode */ ++ unsigned int speed : 2; /* link speed(00->2.5M 01->25M 10->125M) */ ++ unsigned int link : 1; /* link status */ ++#else ++ unsigned int link : 1; /* link status */ ++ unsigned int speed : 2; /* link speed(00->2.5M 01->25M 10->125M) */ ++ unsigned int duplex : 1; /* duplex mode */ ++ unsigned int phy_mode : 1; /* PHY interface mode in 10M-bps */ ++ unsigned int mii_rmii : 2; /* PHY interface type */ ++ unsigned int : 25; ++#endif ++ } bits; ++} GMAC_STATUS_T; ++ ++ ++typedef union ++{ ++ unsigned int bits32; ++ struct bit1_009 ++ { ++#if (BIG_ENDIAN==1) ++ unsigned int : 10; ++ unsigned int tx_fail : 1; /* Tx fail interrupt */ ++ unsigned int cnt_full : 1; /* MIB counters half full interrupt */ ++ unsigned int rx_pause_on : 1; /* received pause on frame interrupt */ ++ unsigned int tx_pause_on : 1; /* transmit pause on frame interrupt */ ++ unsigned int rx_pause_off : 1; /* received pause off frame interrupt */ ++ unsigned int tx_pause_off : 1; /* received pause off frame interrupt */ ++ unsigned int rx_overrun : 1; /* GMAC Rx FIFO overrun interrupt */ ++ unsigned int tx_underrun : 1; /* GMAC Tx FIFO underrun interrupt */ ++ unsigned int : 6; ++ unsigned int m_tx_fail : 1; /* Tx fail interrupt mask */ ++ unsigned int m_cnt_full : 1; /* MIB counters half full interrupt mask */ ++ unsigned int m_rx_pause_on : 1; /* received pause on frame interrupt mask */ ++ unsigned int m_tx_pause_on : 1; /* transmit pause on frame interrupt mask */ ++ unsigned int m_rx_pause_off : 1; /* received pause off frame interrupt mask */ ++ unsigned int m_tx_pause_off : 1; /* received pause off frame interrupt mask */ ++ unsigned int m_rx_overrun : 1; /* GMAC Rx FIFO overrun interrupt mask */ ++ unsigned int m_tx_underrun : 1; /* GMAC Tx FIFO underrun interrupt mask */ ++#else ++ unsigned int m_tx_underrun : 1; /* GMAC Tx FIFO underrun interrupt mask */ ++ unsigned int m_rx_overrun : 1; /* GMAC Rx FIFO overrun interrupt mask */ ++ unsigned int m_tx_pause_off : 1; /* received pause off frame interrupt mask */ ++ unsigned int m_rx_pause_off : 1; /* received pause off frame interrupt mask */ ++ unsigned int m_tx_pause_on : 1; /* transmit pause on frame interrupt mask */ ++ unsigned int m_rx_pause_on : 1; /* received pause on frame interrupt mask */ ++ unsigned int m_cnt_full : 1; /* MIB counters half full interrupt mask */ ++ unsigned int m_tx_fail : 1; /* Tx fail interrupt mask */ ++ unsigned int : 6; ++ unsigned int tx_underrun : 1; /* GMAC Tx FIFO underrun interrupt */ ++ unsigned int rx_overrun : 1; /* GMAC Rx FIFO overrun interrupt */ ++ unsigned int tx_pause_off : 1; /* received pause off frame interrupt */ ++ unsigned int rx_pause_off : 1; /* received pause off frame interrupt */ ++ unsigned int tx_pause_on : 1; /* transmit pause on frame interrupt */ ++ unsigned int rx_pause_on : 1; /* received pause on frame interrupt */ ++ unsigned int cnt_full : 1; /* MIB counters half full interrupt */ ++ unsigned int tx_fail : 1; /* Tx fail interrupt */ ++ unsigned int : 10; ++#endif ++ } bits; ++} GMAC_INT_MASK_T; ++ ++ ++/*******************************************/ ++/* the register structure of GMAC DMA */ ++/*******************************************/ ++typedef union ++{ ++ unsigned int bits32; ++ struct bit2_ff00 ++ { ++#if (BIG_ENDIAN==1) ++ unsigned int : 7; /* reserved */ ++ unsigned int s_ahb_err : 1; /* Slave AHB bus error */ ++ unsigned int tx_err_code : 4; /* TxDMA error code */ ++ unsigned int rx_err_code : 4; /* RxDMA error code */ ++ unsigned int device_id : 12; ++ unsigned int revision_id : 4; ++#else ++ unsigned int revision_id : 4; ++ unsigned int device_id : 12; ++ unsigned int rx_err_code : 4; /* RxDMA error code */ ++ unsigned int tx_err_code : 4; /* TxDMA error code */ ++ unsigned int s_ahb_err : 1; /* Slave AHB bus error */ ++ unsigned int : 7; /* reserved */ ++#endif ++ } bits; ++} GMAC_DMA_DEVICE_ID_T; ++ ++typedef union ++{ ++ unsigned int bits32; ++ struct bit2_ff04 ++ { ++#if (BIG_ENDIAN==1) ++ unsigned int ts_finish : 1; /* finished tx interrupt */ ++ unsigned int ts_derr : 1; /* AHB Bus Error while tx */ ++ unsigned int ts_perr : 1; /* Tx Descriptor protocol error */ ++ unsigned int ts_eodi : 1; /* TxDMA end of descriptor interrupt */ ++ unsigned int ts_eofi : 1; /* TxDMA end of frame interrupt */ ++ unsigned int rs_finish : 1; /* finished rx interrupt */ ++ unsigned int rs_derr : 1; /* AHB Bus Error while rx */ ++ unsigned int rs_perr : 1; /* Rx Descriptor protocol error */ ++ unsigned int rs_eodi : 1; /* RxDMA end of descriptor interrupt */ ++ unsigned int rs_eofi : 1; /* RxDMA end of frame interrupt */ ++ unsigned int : 1; /* Tx fail interrupt */ ++ unsigned int cnt_full : 1; /* MIB counters half full interrupt */ ++ unsigned int rx_pause_on : 1; /* received pause on frame interrupt */ ++ unsigned int tx_pause_on : 1; /* transmit pause on frame interrupt */ ++ unsigned int rx_pause_off : 1; /* received pause off frame interrupt */ ++ unsigned int tx_pause_off : 1; /* received pause off frame interrupt */ ++ unsigned int rx_overrun : 1; /* GMAC Rx FIFO overrun interrupt */ ++ unsigned int link_change : 1; /* GMAC link changed Interrupt for RGMII mode */ ++ unsigned int : 1; ++ unsigned int : 1; ++ unsigned int : 3; ++ unsigned int loop_back : 1; /* loopback TxDMA to RxDMA */ ++ unsigned int : 1; /* Tx fail interrupt mask */ ++ unsigned int m_cnt_full : 1; /* MIB counters half full interrupt mask */ ++ unsigned int m_rx_pause_on : 1; /* received pause on frame interrupt mask */ ++ unsigned int m_tx_pause_on : 1; /* transmit pause on frame interrupt mask */ ++ unsigned int m_rx_pause_off : 1; /* received pause off frame interrupt mask */ ++ unsigned int m_tx_pause_off : 1; /* received pause off frame interrupt mask */ ++ unsigned int m_rx_overrun : 1; /* GMAC Rx FIFO overrun interrupt mask */ ++ unsigned int m_link_change : 1; /* GMAC link changed Interrupt mask for RGMII mode */ ++#else ++ unsigned int m_link_change : 1; /* GMAC link changed Interrupt mask for RGMII mode */ ++ unsigned int m_rx_overrun : 1; /* GMAC Rx FIFO overrun interrupt mask */ ++ unsigned int m_tx_pause_off : 1; /* received pause off frame interrupt mask */ ++ unsigned int m_rx_pause_off : 1; /* received pause off frame interrupt mask */ ++ unsigned int m_tx_pause_on : 1; /* transmit pause on frame interrupt mask */ ++ unsigned int m_rx_pause_on : 1; /* received pause on frame interrupt mask */ ++ unsigned int m_cnt_full : 1; /* MIB counters half full interrupt mask */ ++ unsigned int : 1; /* Tx fail interrupt mask */ ++ unsigned int loop_back : 1; /* loopback TxDMA to RxDMA */ ++ unsigned int : 3; ++ unsigned int : 1; ++ unsigned int : 1; ++ unsigned int link_change : 1; /* GMAC link changed Interrupt for RGMII mode */ ++ unsigned int rx_overrun : 1; /* GMAC Rx FIFO overrun interrupt */ ++ unsigned int tx_pause_off : 1; /* received pause off frame interrupt */ ++ unsigned int rx_pause_off : 1; /* received pause off frame interrupt */ ++ unsigned int tx_pause_on : 1; /* transmit pause on frame interrupt */ ++ unsigned int rx_pause_on : 1; /* received pause on frame interrupt */ ++ unsigned int cnt_full : 1; /* MIB counters half full interrupt */ ++ unsigned int : 1; /* Tx fail interrupt */ ++ unsigned int rs_eofi : 1; /* RxDMA end of frame interrupt */ ++ unsigned int rs_eodi : 1; /* RxDMA end of descriptor interrupt */ ++ unsigned int rs_perr : 1; /* Rx Descriptor protocol error */ ++ unsigned int rs_derr : 1; /* AHB Bus Error while rx */ ++ unsigned int rs_finish : 1; /* finished rx interrupt */ ++ unsigned int ts_eofi : 1; /* TxDMA end of frame interrupt */ ++ unsigned int ts_eodi : 1; /* TxDMA end of descriptor interrupt */ ++ unsigned int ts_perr : 1; /* Tx Descriptor protocol error */ ++ unsigned int ts_derr : 1; /* AHB Bus Error while tx */ ++ unsigned int ts_finish : 1; /* finished tx interrupt */ ++#endif ++ } bits; ++} GMAC_DMA_STATUS_T; ++ ++typedef union ++{ ++ unsigned int bits32; ++ struct bit2_ff08 ++ { ++#if (BIG_ENDIAN==1) ++ unsigned int td_start : 1; /* Start DMA transfer */ ++ unsigned int td_continue : 1; /* Continue DMA operation */ ++ unsigned int td_chain_mode : 1; /* Descriptor Chain Mode;1-Descriptor Chain mode, 0-Direct DMA mode*/ ++ unsigned int : 1; ++ unsigned int td_prot : 4; /* TxDMA protection control */ ++ unsigned int td_burst_size : 2; /* TxDMA max burst size for every AHB request */ ++ unsigned int td_bus : 2; /* peripheral bus width;0x->8 bits,10->16 bits,11->32 bits */ ++ unsigned int td_endian : 1; /* AHB Endian. 0-little endian; 1-big endian */ ++ unsigned int td_finish_en : 1; /* DMA Finish Event Interrupt Enable;1-enable;0-mask */ ++ unsigned int td_fail_en : 1; /* DMA Fail Interrupt Enable;1-enable;0-mask */ ++ unsigned int td_perr_en : 1; /* Protocol Failure Interrupt Enable;1-enable;0-mask */ ++ unsigned int td_eod_en : 1; /* End of Descriptor interrupt Enable;1-enable;0-mask */ ++ unsigned int td_eof_en : 1; /* End of frame interrupt Enable;1-enable;0-mask */ ++ unsigned int : 14; ++#else ++ unsigned int : 14; ++ unsigned int td_eof_en : 1; /* End of frame interrupt Enable;1-enable;0-mask */ ++ unsigned int td_eod_en : 1; /* End of Descriptor interrupt Enable;1-enable;0-mask */ ++ unsigned int td_perr_en : 1; /* Protocol Failure Interrupt Enable;1-enable;0-mask */ ++ unsigned int td_fail_en : 1; /* DMA Fail Interrupt Enable;1-enable;0-mask */ ++ unsigned int td_finish_en : 1; /* DMA Finish Event Interrupt Enable;1-enable;0-mask */ ++ unsigned int td_endian : 1; /* AHB Endian. 0-little endian; 1-big endian */ ++ unsigned int td_bus : 2; /* peripheral bus width;0x->8 bits,10->16 bits,11->32 bits */ ++ unsigned int td_burst_size : 2; /* TxDMA max burst size for every AHB request */ ++ unsigned int td_prot : 4; /* TxDMA protection control */ ++ unsigned int : 1; ++ unsigned int td_chain_mode : 1; /* Descriptor Chain Mode;1-Descriptor Chain mode, 0-Direct DMA mode*/ ++ unsigned int td_continue : 1; /* Continue DMA operation */ ++ unsigned int td_start : 1; /* Start DMA transfer */ ++#endif ++ } bits; ++} GMAC_TXDMA_CTRL_T; ++ ++ ++typedef union ++{ ++ unsigned int bits32; ++ struct bit2_ff0c ++ { ++#if (BIG_ENDIAN==1) ++ unsigned int td_first_des_ptr : 28;/* first descriptor address */ ++ unsigned int td_busy : 1;/* 1-TxDMA busy; 0-TxDMA idle */ ++ unsigned int : 3; ++#else ++ unsigned int : 3; ++ unsigned int td_busy : 1;/* 1-TxDMA busy; 0-TxDMA idle */ ++ unsigned int td_first_des_ptr : 28;/* first descriptor address */ ++#endif ++ } bits; ++} GMAC_TXDMA_FIRST_DESC_T; ++ ++typedef union ++{ ++ unsigned int bits32; ++ struct bit2_ff10 ++ { ++#if (BIG_ENDIAN==1) ++ unsigned int ndar : 28; /* next descriptor address */ ++ unsigned int eofie : 1; /* end of frame interrupt enable */ ++ unsigned int : 1; ++ unsigned int sof_eof : 2; ++#else ++ unsigned int sof_eof : 2; ++ unsigned int : 1; ++ unsigned int eofie : 1; /* end of frame interrupt enable */ ++ unsigned int ndar : 28; /* next descriptor address */ ++#endif ++ } bits; ++} GMAC_TXDMA_CURR_DESC_T; ++ ++ ++typedef union ++{ ++ unsigned int bits32; ++ struct bit2_ff14 ++ { ++#if (BIG_ENDIAN==1) ++ unsigned int rd_start : 1; /* Start DMA transfer */ ++ unsigned int rd_continue : 1; /* Continue DMA operation */ ++ unsigned int rd_chain_mode : 1; /* Descriptor Chain Mode;1-Descriptor Chain mode, 0-Direct DMA mode*/ ++ unsigned int : 1; ++ unsigned int rd_prot : 4; /* DMA protection control */ ++ unsigned int rd_burst_size : 2; /* DMA max burst size for every AHB request */ ++ unsigned int rd_bus : 2; /* peripheral bus width;0x->8 bits,10->16 bits,11->32 bits */ ++ unsigned int rd_endian : 1; /* AHB Endian. 0-little endian; 1-big endian */ ++ unsigned int rd_finish_en : 1; /* DMA Finish Event Interrupt Enable;1-enable;0-mask */ ++ unsigned int rd_fail_en : 1; /* DMA Fail Interrupt Enable;1-enable;0-mask */ ++ unsigned int rd_perr_en : 1; /* Protocol Failure Interrupt Enable;1-enable;0-mask */ ++ unsigned int rd_eod_en : 1; /* End of Descriptor interrupt Enable;1-enable;0-mask */ ++ unsigned int rd_eof_en : 1; /* End of frame interrupt Enable;1-enable;0-mask */ ++ unsigned int : 14; ++#else ++ unsigned int : 14; ++ unsigned int rd_eof_en : 1; /* End of frame interrupt Enable;1-enable;0-mask */ ++ unsigned int rd_eod_en : 1; /* End of Descriptor interrupt Enable;1-enable;0-mask */ ++ unsigned int rd_perr_en : 1; /* Protocol Failure Interrupt Enable;1-enable;0-mask */ ++ unsigned int rd_fail_en : 1; /* DMA Fail Interrupt Enable;1-enable;0-mask */ ++ unsigned int rd_finish_en : 1; /* DMA Finish Event Interrupt Enable;1-enable;0-mask */ ++ unsigned int rd_endian : 1; /* AHB Endian. 0-little endian; 1-big endian */ ++ unsigned int rd_bus : 2; /* peripheral bus width;0x->8 bits,10->16 bits,11->32 bits */ ++ unsigned int rd_burst_size : 2; /* DMA max burst size for every AHB request */ ++ unsigned int rd_prot : 4; /* DMA protection control */ ++ unsigned int : 1; ++ unsigned int rd_chain_mode : 1; /* Descriptor Chain Mode;1-Descriptor Chain mode, 0-Direct DMA mode*/ ++ unsigned int rd_continue : 1; /* Continue DMA operation */ ++ unsigned int rd_start : 1; /* Start DMA transfer */ ++#endif ++ } bits; ++} GMAC_RXDMA_CTRL_T; ++ ++ ++typedef union ++{ ++ unsigned int bits32; ++ struct bit2_ff18 ++ { ++#if (BIG_ENDIAN==1) ++ unsigned int rd_first_des_ptr : 28;/* first descriptor address */ ++ unsigned int rd_busy : 1;/* 1-RxDMA busy; 0-RxDMA idle */ ++ unsigned int : 3; ++#else ++ unsigned int : 3; ++ unsigned int rd_busy : 1;/* 1-RxDMA busy; 0-RxDMA idle */ ++ unsigned int rd_first_des_ptr : 28;/* first descriptor address */ ++#endif ++ } bits; ++} GMAC_RXDMA_FIRST_DESC_T; ++ ++typedef union ++{ ++ unsigned int bits32; ++ struct bit2_ff1c ++ { ++#if (BIG_ENDIAN==1) ++ unsigned int ndar : 28; /* next descriptor address */ ++ unsigned int eofie : 1; /* end of frame interrupt enable */ ++ unsigned int : 1; ++ unsigned int sof_eof : 2; ++#else ++ unsigned int sof_eof : 2; ++ unsigned int : 1; ++ unsigned int eofie : 1; /* end of frame interrupt enable */ ++ unsigned int ndar : 28; /* next descriptor address */ ++#endif ++ } bits; ++} GMAC_RXDMA_CURR_DESC_T; ++ ++ ++/********************************************/ ++/* Descriptor Format */ ++/********************************************/ ++ ++typedef struct descriptor_t ++{ ++ union frame_control_t ++ { ++ unsigned int bits32; ++ struct bits_0000 ++ { ++#if (BIG_ENDIAN==1) ++ unsigned int own : 1; /* owner bit. 0-CPU, 1-DMA */ ++ unsigned int derr : 1; /* data error during processing this descriptor */ ++ unsigned int perr : 1; /* protocol error during processing this descriptor */ ++ unsigned int csum_state : 3; /* checksum error status */ ++ unsigned int vlan_tag : 1; /* 802.1q vlan tag packet */ ++ unsigned int frame_state: 3; /* reference Rx Status1 */ ++ unsigned int desc_count : 6; /* number of descriptors used for the current frame */ ++ unsigned int buffer_size:16; /* transfer buffer size associated with current description*/ ++#else ++ unsigned int buffer_size:16; /* transfer buffer size associated with current description*/ ++ unsigned int desc_count : 6; /* number of descriptors used for the current frame */ ++ unsigned int frame_state: 3; /* reference Rx Status1 */ ++ unsigned int vlan_tag : 1; /* 802.1q vlan tag packet */ ++ unsigned int csum_state : 3; /* checksum error status */ ++ unsigned int perr : 1; /* protocol error during processing this descriptor */ ++ unsigned int derr : 1; /* data error during processing this descriptor */ ++ unsigned int own : 1; /* owner bit. 0-CPU, 1-DMA */ ++#endif ++ } bits_rx; ++ ++ struct bits_0001 ++ { ++#if (BIG_ENDIAN==1) ++ unsigned int own : 1; /* owner bit. 0-CPU, 1-DMA */ ++ unsigned int derr : 1; /* data error during processing this descriptor */ ++ unsigned int perr : 1; /* protocol error during processing this descriptor */ ++ unsigned int : 6; ++ unsigned int success_tx : 1; /* successful transmitted */ ++ unsigned int desc_count : 6; /* number of descriptors used for the current frame */ ++ unsigned int buffer_size:16; /* transfer buffer size associated with current description*/ ++#else ++ unsigned int buffer_size:16; /* transfer buffer size associated with current description*/ ++ unsigned int desc_count : 6; /* number of descriptors used for the current frame */ ++ unsigned int success_tx : 1; /* successful transmitted */ ++ unsigned int : 6; ++ unsigned int perr : 1; /* protocol error during processing this descriptor */ ++ unsigned int derr : 1; /* data error during processing this descriptor */ ++ unsigned int own : 1; /* owner bit. 0-CPU, 1-DMA */ ++#endif ++ } bits_tx_in; ++ ++ struct bits_0002 ++ { ++#if (BIG_ENDIAN==1) ++ unsigned int own : 1; /* owner bit. 0-CPU, 1-DMA */ ++ unsigned int derr : 1; /* data error during processing this descriptor */ ++ unsigned int perr : 1; /* protocol error during processing this descriptor */ ++ unsigned int : 2; ++ unsigned int udp_csum_en: 1; /* TSS UDP checksum enable */ ++ unsigned int tcp_csum_en: 1; /* TSS TCP checksum enable */ ++ unsigned int ipv6_tx_en : 1; /* TSS IPv6 TX enable */ ++ unsigned int ip_csum_en : 1; /* TSS IPv4 IP Header checksum enable */ ++ unsigned int vlan_enable: 1; /* VLAN TIC insertion enable */ ++ unsigned int desc_count : 6; /* number of descriptors used for the current frame */ ++ unsigned int buffer_size:16; /* transfer buffer size associated with current description*/ ++#else ++ unsigned int buffer_size:16; /* transfer buffer size associated with current description*/ ++ unsigned int desc_count : 6; /* number of descriptors used for the current frame */ ++ unsigned int vlan_enable: 1; /* VLAN TIC insertion enable */ ++ unsigned int ip_csum_en : 1; /* TSS IPv4 IP Header checksum enable */ ++ unsigned int ipv6_tx_en : 1; /* TSS IPv6 TX enable */ ++ unsigned int tcp_csum_en: 1; /* TSS TCP checksum enable */ ++ unsigned int udp_csum_en: 1; /* TSS UDP checksum enable */ ++ unsigned int : 2; ++ unsigned int perr : 1; /* protocol error during processing this descriptor */ ++ unsigned int derr : 1; /* data error during processing this descriptor */ ++ unsigned int own : 1; /* owner bit. 0-CPU, 1-DMA */ ++#endif ++ } bits_tx_out; ++ ++ } frame_ctrl; ++ ++ union flag_status_t ++ { ++ unsigned int bits32; ++ struct bits_0004 ++ { ++#if (BIG_ENDIAN==1) ++ unsigned int priority : 3; /* user priority extracted from receiving frame*/ ++ unsigned int cfi : 1; /* cfi extracted from receiving frame*/ ++ unsigned int vlan_id :12; /* VLAN ID extracted from receiving frame */ ++ unsigned int frame_count:16; /* received frame byte count,include CRC,not include VLAN TIC */ ++#else ++ unsigned int frame_count:16; /* received frame byte count,include CRC,not include VLAN TIC */ ++ unsigned int vlan_id :12; /* VLAN ID extracted from receiving frame */ ++ unsigned int cfi : 1; /* cfi extracted from receiving frame*/ ++ unsigned int priority : 3; /* user priority extracted from receiving frame*/ ++#endif ++ } bits_rx_status; ++ ++ struct bits_0005 ++ { ++#if (BIG_ENDIAN==1) ++ unsigned int priority : 3; /* user priority to transmit*/ ++ unsigned int cfi : 1; /* cfi to transmit*/ ++ unsigned int vlan_id :12; /* VLAN ID to transmit */ ++ unsigned int frame_count:16; /* total tx frame byte count */ ++#else ++ unsigned int frame_count:16; /* total tx frame byte count */ ++ unsigned int vlan_id :12; /* VLAN ID to transmit */ ++ unsigned int cfi : 1; /* cfi to transmit*/ ++ unsigned int priority : 3; /* user priority to transmit*/ ++#endif ++ } bits_tx_flag; ++ } flag_status; ++ ++ unsigned int buf_adr; /* data buffer address */ ++ ++ union next_desc_t ++ { ++ unsigned int next_descriptor; ++ struct bits_000c ++ { ++#if (BIG_ENDIAN==1) ++ unsigned int ndar :28; /* next descriptor address */ ++ unsigned int eofie : 1; /* end of frame interrupt enable */ ++ unsigned int : 1; ++ unsigned int sof_eof : 2; /* 00-the linking descriptor 01-the last descriptor of a frame*/ ++ /* 10-the first descriptor of a frame 11-only one descriptor for a frame*/ ++#else ++ unsigned int sof_eof : 2; /* 00-the linking descriptor 01-the last descriptor of a frame*/ ++ /* 10-the first descriptor of a frame 11-only one descriptor for a frame*/ ++ unsigned int : 1; ++ unsigned int eofie : 1; /* end of frame interrupt enable */ ++ unsigned int ndar :28; /* next descriptor address */ ++#endif ++ } bits; ++ } next_desc; ++} GMAC_DESCRIPTOR_T; ++ ++typedef struct gmac_conf { ++ struct net_device *dev; ++ int portmap; ++ int vid; ++ int flag; /* 1: active 0: non-active */ ++} sys_gmac_conf; ++ ++struct gmac_private { ++ unsigned char *tx_bufs; /* Tx bounce buffer region. */ ++ unsigned char *rx_bufs; ++ GMAC_DESCRIPTOR_T *tx_desc; /* point to virtual TX descriptor address*/ ++ GMAC_DESCRIPTOR_T *rx_desc; /* point to virtual RX descriptor address*/ ++ GMAC_DESCRIPTOR_T *tx_cur_desc; /* point to current TX descriptor */ ++ GMAC_DESCRIPTOR_T *rx_cur_desc; /* point to current RX descriptor */ ++ GMAC_DESCRIPTOR_T *tx_finished_desc; ++ GMAC_DESCRIPTOR_T *rx_finished_desc; ++ unsigned long cur_tx; ++ unsigned int cur_rx; /* Index into the Rx buffer of next Rx pkt. */ ++ unsigned int tx_flag; ++ unsigned long dirty_tx; ++ unsigned char *tx_buf[TX_DESC_NUM]; /* Tx bounce buffers */ ++ dma_addr_t tx_desc_dma; /* physical TX descriptor address */ ++ dma_addr_t rx_desc_dma; /* physical RX descriptor address */ ++ dma_addr_t tx_bufs_dma; /* physical TX descriptor address */ ++ dma_addr_t rx_bufs_dma; /* physical RX descriptor address */ ++ struct net_device_stats stats; ++ pid_t thr_pid; ++ wait_queue_head_t thr_wait; ++ struct completion thr_exited; ++ spinlock_t lock; ++ int time_to_die; ++ unsigned int tx_desc_hdr[GMAC_PHY_IF]; /* the descriptor which sw can fill */ ++ unsigned int tx_desc_tail[GMAC_PHY_IF]; /* the descriptor which is not cleaned yet */ ++}; ++ ++ ++struct reg_ioctl_data { ++ unsigned int reg_addr; /* the register address */ ++ unsigned int val_in; /* data write to the register */ ++ unsigned int val_out; /* data read from the register */ ++}; ++ ++#ifdef CONFIG_SL2312_MPAGE ++typedef struct tx_data_t { ++ int freeable; // 1 when it's skb. it can be freed in tx interrupt handler ++ struct sk_buff* skb; // skb ++ int desc_in_use; // 1 when the desc is in use. 0 when desc is available. ++ long end_seq; // to find out packets are in seq. ++ // so this value is the seq of next packet. ++} tx_data; ++#endif ++ ++/************************************************************* ++ * Global Variable ++ *************************************************************/ ++struct semaphore sem_gmac; /* semaphore for share pins issue */ ++ ++/************************************************************* ++ * Static Global Variable ++ *************************************************************/ ++// static unsigned int MAC_BASE_ADDR = GMAC0_BASE; ++static unsigned int gmac_base_addr[GMAC_PHY_IF] = {GMAC0_BASE,GMAC1_BASE}; ++static unsigned int gmac_irq[GMAC_PHY_IF] = {IRQ_GMAC0,IRQ_GMAC1}; ++static struct net_device *gmac_dev[GMAC_PHY_IF]; ++ ++static unsigned int FLAG_SWITCH=0; /* if 1-->switch chip presented. if 0-->switch chip unpresented */ ++static unsigned int flow_control_enable[GMAC_PHY_IF] = {1,1}; ++static unsigned int pre_phy_status[GMAC_PHY_IF] = {LINK_DOWN,LINK_DOWN}; ++static unsigned int tx_desc_virtual_base[GMAC_PHY_IF]; ++static unsigned int rx_desc_virtual_base[GMAC_PHY_IF]; ++static unsigned int full_duplex = 1; ++static unsigned int speed = 1; ++#ifdef CONFIG_SL2312_MPAGE ++static tx_data tx_skb[GMAC_PHY_IF][TX_DESC_NUM]; ++#else ++static struct sk_buff *tx_skb[GMAC_PHY_IF][TX_DESC_NUM]; ++#endif ++static struct sk_buff *rx_skb[GMAC_PHY_IF][RX_DESC_NUM]; ++static unsigned int tx_desc_start_adr[GMAC_PHY_IF]; ++static unsigned int rx_desc_start_adr[GMAC_PHY_IF]; ++static unsigned char eth0_mac[6]= {0x00,0x50,0xc2,0x2b,0xd3,0x25}; ++static unsigned char eth1_mac[6]= {0x00,0x50,0xc2,0x2b,0xdf,0xfe}; ++static unsigned int next_tick = 3 * HZ; ++ ++static unsigned int phy_addr[GMAC_PHY_IF] = {0x01,0x02}; /* define PHY address */ ++ ++DECLARE_WAIT_QUEUE_HEAD(gmac_queue); ++//static wait_queue_t wait; ++ ++struct gmac_conf VLAN_conf[] = { ++#ifdef CONFIG_ADM_6999 ++ { (struct net_device *)0,0x7F,1 }, ++ { (struct net_device *)0,0x80,2 } ++#endif ++#ifdef CONFIG_ADM_6996 ++ { (struct net_device *)0,0x0F,1 }, ++ { (struct net_device *)0,0x10,2 } ++#endif ++}; ++ ++#define NUM_VLAN_IF (sizeof(VLAN_conf)/sizeof(struct gmac_conf)) ++ ++ ++/************************************************/ ++/* GMAC function declare */ ++/************************************************/ ++ ++unsigned int mii_read(unsigned char phyad,unsigned char regad); ++void mii_write(unsigned char phyad,unsigned char regad,unsigned int value); ++static void gmac_set_phy_status(struct net_device *dev); ++static void gmac_get_phy_status(struct net_device *dev); ++static int gmac_phy_thread (void *data); ++static int gmac_set_mac_address(struct net_device *dev, void *addr); ++static void gmac_tx_timeout(struct net_device *dev); ++static void gmac_tx_packet_complete(struct net_device *dev); ++static int gmac_start_xmit(struct sk_buff *skb, struct net_device *dev); ++static void gmac_set_rx_mode(struct net_device *dev); ++static void gmac_rx_packet(struct net_device *dev); ++static int gmac_open (struct net_device *dev); ++static int gmac_netdev_ioctl(struct net_device *dev, struct ifreq *rq, int cmd); ++ ++static unsigned int gmac_get_dev_index(struct net_device *dev); ++static unsigned int gmac_select_interface(struct net_device *dev); ++ ++#ifdef CONFIG_SL2312_MPAGE ++int printk_all(int dev_index, struct gmac_private* tp); ++#endif ++ ++/****************************************/ ++/* SPI Function Declare */ ++/****************************************/ ++void SPI_write(unsigned char addr,unsigned int value); ++unsigned int SPI_read(unsigned char table,unsigned char addr); ++void SPI_write_bit(char bit_EEDO); ++unsigned int SPI_read_bit(void); ++void SPI_default(void); ++void SPI_reset(unsigned char rstype,unsigned char port_cnt); ++void SPI_pre_st(void); ++void SPI_CS_enable(unsigned char enable); ++void SPI_Set_VLAN(unsigned char LAN,unsigned int port_mask); ++void SPI_Set_tag(unsigned int port,unsigned tag); ++void SPI_Set_PVID(unsigned int PVID,unsigned int port_mask); ++unsigned int SPI_Get_PVID(unsigned int port); ++void SPI_mac_lock(unsigned int port, unsigned char lock); ++void SPI_get_port_state(unsigned int port); ++void SPI_port_enable(unsigned int port,unsigned char enable); ++unsigned int SPI_get_identifier(void); ++void SPI_get_status(unsigned int port); ++ ++/****************************************/ ++/* VLAN Function Declare */ ++/****************************************/ ++int getVLANfromdev (struct net_device *dev ); ++struct net_device * getdevfromVLAN( int VID); ++ ++ ++ ++/************************************************/ ++/* function body */ ++/************************************************/ ++#if 0 ++void hw_memcpy(void *to,const void *from,unsigned long n) ++{ ++ writel(from,SL2312_DRAM_CTRL_BASE+0x20); /* set source address */ ++ writel(to,SL2312_DRAM_CTRL_BASE+0x24); /* set destination address */ ++ writel(n,SL2312_DRAM_CTRL_BASE+0x28); /* set byte count */ ++ writel(0x00000001,SL2312_DRAM_CTRL_BASE+0x2c); ++ while (readl(SL2312_DRAM_CTRL_BASE+0x2c)); ++} ++#endif ++ ++static unsigned int gmac_read_reg(unsigned int addr) ++{ ++ unsigned int reg_val; ++// unsigned int flags; ++// spinlock_t lock; ++ ++// spin_lock_irqsave(&lock, flags); ++ reg_val = readl(addr); // Gary Chen ++// spin_unlock_irqrestore(&lock, flags); ++ return (reg_val); ++} ++ ++static void gmac_write_reg(unsigned int addr,unsigned int data,unsigned int bit_mask) ++{ ++ unsigned int reg_val; ++ //unsigned int *addr; ++// unsigned int flags; ++// spinlock_t lock; ++ ++// spin_lock_irqsave(&lock, flags); ++ reg_val = ( gmac_read_reg(addr) & (~bit_mask) ) | (data & bit_mask); ++ writel(reg_val,addr); ++// spin_unlock_irqrestore(&lock, flags); ++ return; ++} ++ ++ ++static void gmac_sw_reset(struct net_device *dev) ++{ ++ unsigned int index; ++ unsigned int reg_val; ++ ++ index = gmac_get_dev_index(dev); ++ if (index==0) ++ reg_val = readl(GMAC_GLOBAL_BASE_ADDR+0x0c) | 0x00000020; /* GMAC0 S/W reset */ ++ else ++ reg_val = readl(GMAC_GLOBAL_BASE_ADDR+0x0c) | 0x00000040; /* GMAC1 S/W reset */ ++ ++ writel(reg_val,GMAC_GLOBAL_BASE_ADDR+0x0c); ++ return; ++} ++ ++static void gmac_get_mac_address(void) ++{ ++#ifdef CONFIG_MTD ++ extern int get_vlaninfo(vlaninfo* vlan); ++ static vlaninfo vlan[2]; ++ ++ if (get_vlaninfo(&vlan[0])) ++ { ++ memcpy(eth0_mac,vlan[0].mac,6); ++ VLAN_conf[0].vid = vlan[0].vlanid; ++ VLAN_conf[0].portmap = vlan[0].vlanmap; ++ memcpy(eth1_mac,vlan[1].mac,6); ++ VLAN_conf[1].vid = vlan[1].vlanid; ++ VLAN_conf[1].portmap = vlan[1].vlanmap; ++ } ++#else ++ unsigned int reg_val; ++ ++ reg_val = readl(IO_ADDRESS(SL2312_SECURITY_BASE)+0xac); ++ eth0_mac[4] = (reg_val & 0xff00) >> 8; ++ eth0_mac[5] = reg_val & 0x00ff; ++ reg_val = readl(IO_ADDRESS(SL2312_SECURITY_BASE)+0xac); ++ eth1_mac[4] = (reg_val & 0xff00) >> 8; ++ eth1_mac[5] = reg_val & 0x00ff; ++#endif ++ return; ++} ++ ++static unsigned int gmac_get_dev_index(struct net_device *dev) ++{ ++ unsigned int i; ++ ++ /* get device index number */ ++ for (i=0;iMII 1->GMII 2->RGMII(10/100) 3->RGMII(1000) */ ++ else ++ phy_mode = 2; /* 0->MII 1->GMII 2->RGMII(10/100) 3->RGMII(1000) */ ++ ++ /* set PHY operation mode */ ++ status = (phy_mode<<5) | 0x11 | (full_duplex<<3) | (speed<<1); ++ gmac_write_reg(gmac_base_addr[index] + GMAC_STATUS,status ,0x0000007f); ++ ++ /* set station MAC address1 and address2 */ ++ if (index==0) ++ memcpy(&sock.sa_data[0],ð0_mac[0],6); ++ else ++ memcpy(&sock.sa_data[0],ð1_mac[0],6); ++ gmac_set_mac_address(dev,(void *)&sock); ++ ++ /* set RX_FLTR register to receive all multicast packet */ ++ gmac_write_reg(gmac_base_addr[index] + GMAC_RX_FLTR,0x0000001F,0x0000001f); ++ //gmac_write_reg(gmac_base_addr[index] + GMAC_RX_FLTR,0x00000007,0x0000001f); ++ ++ /* set per packet buffer size */ ++ config1.bits32 = 0; ++ config1.bits.buf_size = 11; /* buffer size = 2048-byte */ ++ gmac_write_reg(gmac_base_addr[index] + GMAC_CONFIG1,config1.bits32,0x0000000f); ++ ++ /* set flow control threshold */ ++ config2_val.bits32 = 0; ++ config2_val.bits.set_threshold = RX_DESC_NUM/4; ++ config2_val.bits.rel_threshold = RX_DESC_NUM*3/4; ++ gmac_write_reg(gmac_base_addr[index] + GMAC_CONFIG2,config2_val.bits32,0xffffffff); ++ ++ /* init remaining buffer number register */ ++ rbnr_val.bits32 = 0; ++ rbnr_val.bits.buf_remain = RX_DESC_NUM; ++ rbnr_mask.bits32 = 0; ++ rbnr_mask.bits.buf_remain = 0xffff; ++ gmac_write_reg(gmac_base_addr[index] + GMAC_RBNR,rbnr_val.bits32,rbnr_mask.bits32); ++ ++ /* disable TX/RX and disable internal loop back */ ++ config0.bits32 = 0; ++ config0_mask.bits32 = 0; ++ config0.bits.max_len = 2; ++ if (flow_control_enable[index]==1) ++ { ++ config0.bits.tx_fc_en = 1; /* enable tx flow control */ ++ config0.bits.rx_fc_en = 1; /* enable rx flow control */ ++ printk("Enable MAC Flow Control...\n"); ++ } ++ else ++ { ++ config0.bits.tx_fc_en = 0; /* disable tx flow control */ ++ config0.bits.rx_fc_en = 0; /* disable rx flow control */ ++ printk("Disable MAC Flow Control...\n"); ++ } ++ config0.bits.dis_rx = 1; /* disable rx */ ++ config0.bits.dis_tx = 1; /* disable tx */ ++ config0.bits.loop_back = 0; /* enable/disable GMAC loopback */ ++ config0.bits.inv_rx_clk = 0; ++ config0.bits.rising_latch = 1; ++ config0.bits.ipv4_tss_rx_en = 1; /* enable H/W to check ip checksum */ ++ config0.bits.ipv6_tss_rx_en = 1; /* enable H/W to check ip checksum */ ++ ++ config0_mask.bits.max_len = 7; ++ config0_mask.bits.tx_fc_en = 1; ++ config0_mask.bits.rx_fc_en = 1; ++ config0_mask.bits.dis_rx = 1; ++ config0_mask.bits.dis_tx = 1; ++ config0_mask.bits.loop_back = 1; ++ config0_mask.bits.inv_rx_clk = 1; ++ config0_mask.bits.rising_latch = 1; ++ config0_mask.bits.ipv4_tss_rx_en = 1; ++ config0_mask.bits.ipv6_tss_rx_en = 1; ++ gmac_write_reg(gmac_base_addr[index] + GMAC_CONFIG0,config0.bits32,config0_mask.bits32); ++ ++ return (0); ++} ++ ++static void gmac_enable_tx_rx(struct net_device *dev) ++{ ++ GMAC_CONFIG0_T config0,config0_mask; ++ int dev_index; ++ ++ dev_index = gmac_select_interface(dev); ++ ++ /* enable TX/RX */ ++ config0.bits32 = 0; ++ config0_mask.bits32 = 0; ++ config0.bits.dis_rx = 0; /* enable rx */ ++ config0.bits.dis_tx = 0; /* enable tx */ ++ config0_mask.bits.dis_rx = 1; ++ config0_mask.bits.dis_tx = 1; ++ gmac_write_reg(gmac_base_addr[dev_index] + GMAC_CONFIG0,config0.bits32,config0_mask.bits32); ++} ++ ++static void gmac_disable_tx_rx(struct net_device *dev) ++{ ++ GMAC_CONFIG0_T config0,config0_mask; ++ int dev_index; ++ ++ dev_index = gmac_select_interface(dev); ++ ++ /* enable TX/RX */ ++ config0.bits32 = 0; ++ config0_mask.bits32 = 0; ++ config0.bits.dis_rx = 1; /* disable rx */ ++ config0.bits.dis_tx = 1; /* disable tx */ ++ config0_mask.bits.dis_rx = 1; ++ config0_mask.bits.dis_tx = 1; ++ gmac_write_reg(gmac_base_addr[dev_index] + GMAC_CONFIG0,config0.bits32,config0_mask.bits32); ++} ++ ++#ifdef CONFIG_SL_NAPI ++static int gmac_rx_poll_ga(struct net_device *dev, int *budget) ++{ ++ struct gmac_private *tp = dev->priv; ++ struct sk_buff *skb; ++ GMAC_RXDMA_CTRL_T rxdma_ctrl,rxdma_ctrl_mask; ++ GMAC_RXDMA_FIRST_DESC_T rxdma_busy; ++ GMAC_DESCRIPTOR_T *rx_desc; ++ unsigned int pkt_size; ++ unsigned int desc_count; ++ unsigned int vid; ++// unsigned int priority; ++ unsigned int own; ++ unsigned int good_frame = 0; ++ unsigned int index; ++ unsigned int dev_index; ++ int work = 0; ++ int work_done = 0; ++ int quota = min(dev->quota, *budget); ++ ++ dev_index = gmac_select_interface(dev); ++ ++ for (;;) ++ { ++ own = tp->rx_cur_desc->frame_ctrl.bits32 >> 31; ++ if (own == CPU) /* check owner bit */ ++ { ++ rx_desc = tp->rx_cur_desc; ++#if (GMAC_DEBUG==1) ++ /* check error interrupt */ ++ if ( (rx_desc->frame_ctrl.bits_rx.derr==1)||(rx_desc->frame_ctrl.bits_rx.perr==1) ) ++ { ++ printk("%s::Rx Descriptor Processing Error !!!\n",__func__); ++ } ++#endif ++ /* get frame information from the first descriptor of the frame */ ++ pkt_size = rx_desc->flag_status.bits_rx_status.frame_count - 4; /*total byte count in a frame*/ ++#if (GMAC_DEBUG==1) ++ priority = rx_desc->flag_status.bits_rx_status.priority; /* 802.1p priority */ ++#endif ++ vid = rx_desc->flag_status.bits_rx_status.vlan_id; /* 802.1q vlan id */ ++ if (vid == 0) ++ { ++ vid = 1; /* default vlan */ ++ } ++ desc_count = rx_desc->frame_ctrl.bits_rx.desc_count; /* get descriptor count per frame */ ++ ++ if (rx_desc->frame_ctrl.bits_rx.frame_state == 0x000) /* good frame */ ++ { ++ tp->stats.rx_bytes += pkt_size; ++ tp->stats.rx_packets++; ++ good_frame = 1; ++ } ++ else ++ { ++ tp->stats.rx_errors++; ++ good_frame = 0; ++ printk("RX status: 0x%x\n",rx_desc->frame_ctrl.bits_rx.frame_state); ++ } ++ } ++ else ++ { ++ work_done = 1; ++ break; /* Rx process is completed */ ++ } ++ ++ if (good_frame == 1) ++ { ++ /* get rx skb buffer index */ ++ index = ((unsigned int)tp->rx_cur_desc - rx_desc_start_adr[dev_index]) / sizeof(GMAC_DESCRIPTOR_T); ++ if (rx_skb[dev_index][index]) ++ { ++ skb_reserve (rx_skb[dev_index][index], 2); /* 16 byte align the IP fields. */ ++ rx_skb[dev_index][index]->dev = dev; ++ rx_skb[dev_index][index]->ip_summed = CHECKSUM_UNNECESSARY; ++ skb_put(rx_skb[dev_index][index],pkt_size); ++ rx_skb[dev_index][index]->protocol = eth_type_trans(rx_skb[dev_index][index],dev); /* set skb protocol */ ++ netif_rx(rx_skb[dev_index][index]); /* socket rx */ ++ dev->last_rx = jiffies; ++ ++ /* allocate rx skb buffer */ ++ if ( (skb = dev_alloc_skb(RX_BUF_SIZE))==NULL) /* allocate socket buffer */ ++ { ++ printk("%s::skb buffer allocation fail !\n",__func__); ++ } ++ rx_skb[dev_index][index] = skb; ++ tp->rx_cur_desc->buf_adr = (unsigned int)__pa(skb->data) | 0x02; /* insert two bytes in the beginning of rx data */ ++ } ++ else ++ { ++ printk("%s::rx skb index error !\n",__func__); ++ } ++ } ++ ++ tp->rx_cur_desc->frame_ctrl.bits_rx.own = DMA; /* release rx descriptor to DMA */ ++ /* point to next rx descriptor */ ++ tp->rx_cur_desc = (GMAC_DESCRIPTOR_T *)((tp->rx_cur_desc->next_desc.next_descriptor & 0xfffffff0)+rx_desc_virtual_base[dev_index]); ++ ++ /* release buffer to Remaining Buffer Number Register */ ++ if (flow_control_enable[dev_index] ==1) ++ { ++// gmac_write_reg(gmac_base_addr[dev_index] + GMAC_BNCR,desc_count,0x0000ffff); ++ writel(desc_count,(unsigned int *)(gmac_base_addr[dev_index] + GMAC_BNCR)); ++ } ++ ++ if (work++ >= quota ) ++ { ++ break; ++ } ++ } ++ ++ /* if RX DMA process is stoped , restart it */ ++ rxdma_busy.bits.rd_first_des_ptr = gmac_read_reg(gmac_base_addr[dev_index] + GMAC_RXDMA_FIRST_DESC); ++ if (rxdma_busy.bits.rd_busy == 0) ++ { ++ rxdma_ctrl.bits32 = 0; ++ rxdma_ctrl.bits.rd_start = 1; /* start RX DMA transfer */ ++ rxdma_ctrl.bits.rd_continue = 1; /* continue RX DMA operation */ ++ rxdma_ctrl_mask.bits32 = 0; ++ rxdma_ctrl_mask.bits.rd_start = 1; ++ rxdma_ctrl_mask.bits.rd_continue = 1; ++ gmac_write_reg(gmac_base_addr[dev_index] + GMAC_RXDMA_CTRL,rxdma_ctrl.bits32,rxdma_ctrl_mask.bits32); ++ } ++ ++ dev->quota -= work; ++ *budget -= work; ++ if (work_done==1) ++ { ++ /* Receive descriptor is empty now */ ++ netif_rx_complete(dev); ++ /* enable receive interrupt */ ++ gmac_write_reg(gmac_base_addr[dev_index] + GMAC_RXDMA_CTRL,0x0007c000,0x0007c000); /* enable rx interrupt */ ++ return 0; ++ } ++ else ++ { ++ return -1; ++ } ++} ++ ++static int gmac_rx_poll_gb(struct net_device *dev, int *budget) ++{ ++ struct gmac_private *tp = dev->priv; ++ struct sk_buff *skb; ++ GMAC_RXDMA_CTRL_T rxdma_ctrl,rxdma_ctrl_mask; ++ GMAC_RXDMA_FIRST_DESC_T rxdma_busy; ++ GMAC_DESCRIPTOR_T *rx_desc; ++ unsigned int pkt_size; ++ unsigned int desc_count; ++ unsigned int vid; ++// unsigned int priority; ++ unsigned int own; ++ unsigned int good_frame = 0; ++ unsigned int index; ++ unsigned int dev_index; ++ int work = 0; ++ int work_done = 0; ++ int quota = min(dev->quota, *budget); ++ ++ dev_index = gmac_select_interface(dev); ++ ++ for (;;) ++ { ++ own = tp->rx_cur_desc->frame_ctrl.bits32 >> 31; ++ if (own == CPU) /* check owner bit */ ++ { ++ rx_desc = tp->rx_cur_desc; ++#if (GMAC_DEBUG==1) ++ /* check error interrupt */ ++ if ( (rx_desc->frame_ctrl.bits_rx.derr==1)||(rx_desc->frame_ctrl.bits_rx.perr==1) ) ++ { ++ printk("%s::Rx Descriptor Processing Error !!!\n",__func__); ++ } ++#endif ++ /* get frame information from the first descriptor of the frame */ ++ pkt_size = rx_desc->flag_status.bits_rx_status.frame_count - 4; /*total byte count in a frame*/ ++#if (GMAC_DEBUG==1) ++ priority = rx_desc->flag_status.bits_rx_status.priority; /* 802.1p priority */ ++#endif ++ vid = rx_desc->flag_status.bits_rx_status.vlan_id; /* 802.1q vlan id */ ++ if (vid == 0) ++ { ++ vid = 1; /* default vlan */ ++ } ++ desc_count = rx_desc->frame_ctrl.bits_rx.desc_count; /* get descriptor count per frame */ ++ ++ if (rx_desc->frame_ctrl.bits_rx.frame_state == 0x000) /* good frame */ ++ { ++ tp->stats.rx_bytes += pkt_size; ++ tp->stats.rx_packets++; ++ good_frame = 1; ++ } ++ else ++ { ++ tp->stats.rx_errors++; ++ good_frame = 0; ++ printk("RX status: 0x%x\n",rx_desc->frame_ctrl.bits_rx.frame_state); ++ } ++ } ++ else ++ { ++ work_done = 1; ++ break; /* Rx process is completed */ ++ } ++ ++ if (good_frame == 1) ++ { ++ /* get rx skb buffer index */ ++ index = ((unsigned int)tp->rx_cur_desc - rx_desc_start_adr[dev_index]) / sizeof(GMAC_DESCRIPTOR_T); ++ if (rx_skb[dev_index][index]) ++ { ++ skb_reserve (rx_skb[dev_index][index], 2); /* 16 byte align the IP fields. */ ++ rx_skb[dev_index][index]->dev = dev; ++ rx_skb[dev_index][index]->ip_summed = CHECKSUM_UNNECESSARY; ++ skb_put(rx_skb[dev_index][index],pkt_size); ++ rx_skb[dev_index][index]->protocol = eth_type_trans(rx_skb[dev_index][index],dev); /* set skb protocol */ ++ netif_rx(rx_skb[dev_index][index]); /* socket rx */ ++ dev->last_rx = jiffies; ++ ++ /* allocate rx skb buffer */ ++ if ( (skb = dev_alloc_skb(RX_BUF_SIZE))==NULL) /* allocate socket buffer */ ++ { ++ printk("%s::skb buffer allocation fail !\n",__func__); ++ } ++ rx_skb[dev_index][index] = skb; ++ tp->rx_cur_desc->buf_adr = (unsigned int)__pa(skb->data) | 0x02; /* insert two bytes in the beginning of rx data */ ++ } ++ else ++ { ++ printk("%s::rx skb index error !\n",__func__); ++ } ++ } ++ ++ tp->rx_cur_desc->frame_ctrl.bits_rx.own = DMA; /* release rx descriptor to DMA */ ++ /* point to next rx descriptor */ ++ tp->rx_cur_desc = (GMAC_DESCRIPTOR_T *)((tp->rx_cur_desc->next_desc.next_descriptor & 0xfffffff0)+rx_desc_virtual_base[dev_index]); ++ ++ /* release buffer to Remaining Buffer Number Register */ ++ if (flow_control_enable[dev_index] ==1) ++ { ++// gmac_write_reg(gmac_base_addr[dev_index] + GMAC_BNCR,desc_count,0x0000ffff); ++ writel(desc_count,(unsigned int *)(gmac_base_addr[dev_index] + GMAC_BNCR)); ++ } ++ ++ if (work++ >= quota ) ++ { ++ break; ++ } ++ } ++ ++ /* if RX DMA process is stoped , restart it */ ++ rxdma_busy.bits.rd_first_des_ptr = gmac_read_reg(gmac_base_addr[dev_index] + GMAC_RXDMA_FIRST_DESC); ++ if (rxdma_busy.bits.rd_busy == 0) ++ { ++ rxdma_ctrl.bits32 = 0; ++ rxdma_ctrl.bits.rd_start = 1; /* start RX DMA transfer */ ++ rxdma_ctrl.bits.rd_continue = 1; /* continue RX DMA operation */ ++ rxdma_ctrl_mask.bits32 = 0; ++ rxdma_ctrl_mask.bits.rd_start = 1; ++ rxdma_ctrl_mask.bits.rd_continue = 1; ++ gmac_write_reg(gmac_base_addr[dev_index] + GMAC_RXDMA_CTRL,rxdma_ctrl.bits32,rxdma_ctrl_mask.bits32); ++ } ++ ++ dev->quota -= work; ++ *budget -= work; ++ if (work_done==1) ++ { ++ /* Receive descriptor is empty now */ ++ netif_rx_complete(dev); ++ /* enable receive interrupt */ ++ gmac_write_reg(gmac_base_addr[dev_index] + GMAC_RXDMA_CTRL,0x0007c000,0x0007c000); /* enable rx interrupt */ ++ return 0; ++ } ++ else ++ { ++ return -1; ++ } ++} ++ ++#endif ++ ++static void gmac_rx_packet(struct net_device *dev) ++{ ++ struct gmac_private *tp = dev->priv; ++ struct sk_buff *skb; ++ GMAC_RXDMA_CTRL_T rxdma_ctrl,rxdma_ctrl_mask; ++ GMAC_RXDMA_FIRST_DESC_T rxdma_busy; ++ GMAC_DESCRIPTOR_T *rx_desc; ++ unsigned int pkt_size; ++ unsigned int desc_count; ++ unsigned int vid; ++// unsigned int priority; ++ unsigned int own; ++ unsigned int good_frame = 0; ++ unsigned int i,index; ++ unsigned int dev_index; ++ ++ dev_index = gmac_select_interface(dev); ++ ++ for (i=0;i<256;i++) ++ { ++ own = tp->rx_cur_desc->frame_ctrl.bits32 >> 31; ++ if (own == CPU) /* check owner bit */ ++ { ++ rx_desc = tp->rx_cur_desc; ++#if (GMAC_DEBUG==1) ++ /* check error interrupt */ ++ if ( (rx_desc->frame_ctrl.bits_rx.derr==1)||(rx_desc->frame_ctrl.bits_rx.perr==1) ) ++ { ++ printk("%s::Rx Descriptor Processing Error !!!\n",__func__); ++ } ++#endif ++ /* get frame information from the first descriptor of the frame */ ++ pkt_size = rx_desc->flag_status.bits_rx_status.frame_count - 4; /*total byte count in a frame*/ ++#if (GMAC_DEBUG==1) ++ priority = rx_desc->flag_status.bits_rx_status.priority; /* 802.1p priority */ ++#endif ++ vid = rx_desc->flag_status.bits_rx_status.vlan_id; /* 802.1q vlan id */ ++ if (vid == 0) ++ { ++ vid = 1; /* default vlan */ ++ } ++ desc_count = rx_desc->frame_ctrl.bits_rx.desc_count; /* get descriptor count per frame */ ++ ++ if (rx_desc->frame_ctrl.bits_rx.frame_state == 0x000) /* good frame */ ++ { ++ tp->stats.rx_bytes += pkt_size; ++ tp->stats.rx_packets++; ++ good_frame = 1; ++ } ++ else ++ { ++ tp->stats.rx_errors++; ++ good_frame = 0; ++ printk("RX status: 0x%x\n",rx_desc->frame_ctrl.bits_rx.frame_state); ++ } ++ } ++ else ++ { ++ break; /* Rx process is completed */ ++ } ++ ++ if (good_frame == 1) ++ { ++ /* get rx skb buffer index */ ++ index = ((unsigned int)tp->rx_cur_desc - rx_desc_start_adr[dev_index]) / sizeof(GMAC_DESCRIPTOR_T); ++ if (rx_skb[dev_index][index]) ++ { ++ skb_reserve (rx_skb[dev_index][index], 2); /* 16 byte align the IP fields. */ ++ rx_skb[dev_index][index]->dev = dev; ++ rx_skb[dev_index][index]->ip_summed = CHECKSUM_UNNECESSARY; ++ skb_put(rx_skb[dev_index][index],pkt_size); ++ rx_skb[dev_index][index]->protocol = eth_type_trans(rx_skb[dev_index][index],dev); /* set skb protocol */ ++ netif_rx(rx_skb[dev_index][index]); /* socket rx */ ++ dev->last_rx = jiffies; ++ ++ /* allocate rx skb buffer */ ++ if ( (skb = dev_alloc_skb(RX_BUF_SIZE))==NULL) /* allocate socket buffer */ ++ { ++ printk("%s::skb buffer allocation fail !\n",__func__); ++ } ++ rx_skb[dev_index][index] = skb; ++ tp->rx_cur_desc->buf_adr = (unsigned int)__pa(skb->data) | 0x02; /* insert two bytes in the beginning of rx data */ ++ } ++ else ++ { ++ printk("%s::rx skb index error !\n",__func__); ++ } ++ } ++ ++ tp->rx_cur_desc->frame_ctrl.bits_rx.own = DMA; /* release rx descriptor to DMA */ ++ /* point to next rx descriptor */ ++ tp->rx_cur_desc = (GMAC_DESCRIPTOR_T *)((tp->rx_cur_desc->next_desc.next_descriptor & 0xfffffff0)+rx_desc_virtual_base[dev_index]); ++ ++ /* release buffer to Remaining Buffer Number Register */ ++ if (flow_control_enable[dev_index] ==1) ++ { ++ gmac_write_reg(gmac_base_addr[dev_index] + GMAC_BNCR,desc_count,0x0000ffff); ++ } ++ } ++ ++ /* if RX DMA process is stoped , restart it */ ++ rxdma_busy.bits.rd_first_des_ptr = gmac_read_reg(gmac_base_addr[dev_index] + GMAC_RXDMA_FIRST_DESC); ++ if (rxdma_busy.bits.rd_busy == 0) ++ { ++ rxdma_ctrl.bits32 = 0; ++ rxdma_ctrl.bits.rd_start = 1; /* start RX DMA transfer */ ++ rxdma_ctrl.bits.rd_continue = 1; /* continue RX DMA operation */ ++ rxdma_ctrl_mask.bits32 = 0; ++ rxdma_ctrl_mask.bits.rd_start = 1; ++ rxdma_ctrl_mask.bits.rd_continue = 1; ++ gmac_write_reg(gmac_base_addr[dev_index] + GMAC_RXDMA_CTRL,rxdma_ctrl.bits32,rxdma_ctrl_mask.bits32); ++ } ++} ++ ++#ifdef CONFIG_SL2312_MPAGE ++static inline void free_tx_buf(int dev_index, int desc_index) ++{ ++ if (tx_skb[dev_index][desc_index].freeable && ++ tx_skb[dev_index][desc_index].skb) { ++ struct sk_buff* skb = tx_skb[dev_index][desc_index].skb; ++ //printk("free_skb %x, len %d\n", skb, skb->len); ++#ifdef CONFIG_TXINT_DISABLE ++ dev_kfree_skb(skb); ++#else ++ dev_kfree_skb_irq(skb); ++#endif ++ tx_skb[dev_index][desc_index].skb = 0; ++ } ++} ++ ++#ifdef CONFIG_TXINT_DISABLE ++static void gmac_tx_packet_complete(struct net_device *dev) ++{ ++ struct gmac_private *tp = dev->priv; ++ GMAC_DESCRIPTOR_T *tx_hw_complete_desc, *next_desc; ++ unsigned int desc_cnt=0; ++ unsigned int i,index,dev_index; ++ unsigned int tx_current_descriptor = 0; ++ // int own_dma = 0; ++ ++ dev_index = gmac_select_interface(dev); ++ ++ index = ((unsigned int)tp->tx_finished_desc - tx_desc_start_adr[dev_index]) / sizeof(GMAC_DESCRIPTOR_T); ++ if (tx_skb[dev_index][index].desc_in_use && tp->tx_finished_desc->frame_ctrl.bits_tx_in.own == CPU) { ++ free_tx_buf(dev_index, index); ++ tx_skb[dev_index][index].desc_in_use = 0; ++ } ++ next_desc = (GMAC_DESCRIPTOR_T*)((tp->tx_finished_desc->next_desc.next_descriptor & 0xfffffff0) + tx_desc_virtual_base[dev_index]); ++ ++ for (;;) { ++ tx_hw_complete_desc = (GMAC_DESCRIPTOR_T *)((gmac_read_reg(gmac_base_addr[dev_index] + GMAC_TXDMA_CURR_DESC) & 0xfffffff0)+ tx_desc_virtual_base[dev_index]); ++ if (next_desc == tx_hw_complete_desc) ++ break; ++ if (next_desc->frame_ctrl.bits_tx_in.own == CPU) { ++ if (next_desc->frame_ctrl.bits_tx_in.success_tx == 1) { ++ tp->stats.tx_bytes += next_desc->flag_status.bits_tx_flag.frame_count; ++ tp->stats.tx_packets ++; ++ } else { ++ tp->stats.tx_errors++; ++ } ++ desc_cnt = next_desc->frame_ctrl.bits_tx_in.desc_count; ++ for (i=1; iframe_ctrl.bits_tx_in.own = CPU; ++ free_tx_buf(dev_index, index); ++ tx_skb[dev_index][index].desc_in_use = 0; ++ tp->tx_desc_tail[dev_index] = (tp->tx_desc_tail[dev_index] +1) & (TX_DESC_NUM-1); ++ /* release Tx descriptor to CPU */ ++ next_desc = (GMAC_DESCRIPTOR_T *)((next_desc->next_desc.next_descriptor & 0xfffffff0)+tx_desc_virtual_base[dev_index]); ++ } ++ /* get tx skb buffer index */ ++ index = ((unsigned int)next_desc - tx_desc_start_adr[dev_index]) / sizeof(GMAC_DESCRIPTOR_T); ++ /* free skb buffer */ ++ next_desc->frame_ctrl.bits_tx_in.own = CPU; ++ free_tx_buf(dev_index, index); ++ tx_skb[dev_index][index].desc_in_use = 0; ++ tp->tx_desc_tail[dev_index] = (tp->tx_desc_tail[dev_index] +1) & (TX_DESC_NUM-1); ++ tp->tx_finished_desc = next_desc; ++// printk("finish tx_desc index %d\n", index); ++ next_desc = (GMAC_DESCRIPTOR_T *)((next_desc->next_desc.next_descriptor & 0xfffffff0)+tx_desc_virtual_base[dev_index]); ++ } ++ else ++ break; ++ } ++ if (netif_queue_stopped(dev)) ++ { ++ netif_wake_queue(dev); ++ } ++ ++} ++#else ++static void gmac_tx_packet_complete(struct net_device *dev) ++{ ++ struct gmac_private *tp = dev->priv; ++ GMAC_DESCRIPTOR_T *tx_hw_complete_desc; ++ unsigned int desc_cnt=0; ++ unsigned int i,index,dev_index; ++ unsigned int tx_current_descriptor = 0; ++ // int own_dma = 0; ++ ++ dev_index = gmac_select_interface(dev); ++ ++ index = ((unsigned int)tp->tx_finished_desc - tx_desc_start_adr[dev_index]) / sizeof(GMAC_DESCRIPTOR_T); ++ ++ /* check tx status and accumulate tx statistics */ ++ for (;;) ++ { ++ ++ for (i=0;i<1000;i++) ++ { ++ tx_current_descriptor = gmac_read_reg(gmac_base_addr[dev_index] + GMAC_TXDMA_CURR_DESC); ++ if ( ((tx_current_descriptor & 0x00000003)==0x00000003) || /* only one descriptor */ ++ ((tx_current_descriptor & 0x00000003)==0x00000001) ) /* the last descriptor */ ++ { ++ break; ++ } ++ udelay(1); ++ } ++ if (i==1000) ++ { ++// gmac_dump_register(dev); ++// printk("%s: tx current descriptor = %x \n",__func__,tx_current_descriptor); ++// printk_all(dev_index, tp); ++ continue; ++ } ++ ++ /* get tx H/W completed descriptor virtual address */ ++ tx_hw_complete_desc = (GMAC_DESCRIPTOR_T *)((tx_current_descriptor & 0xfffffff0)+ tx_desc_virtual_base[dev_index]); ++// tx_hw_complete_desc = (GMAC_DESCRIPTOR_T *)((gmac_read_reg(gmac_base_addr[dev_index] + GMAC_TXDMA_CURR_DESC) & 0xfffffff0)+ tx_desc_virtual_base[dev_index]); ++ if (tp->tx_finished_desc == tx_hw_complete_desc ) // || ++ //tx_skb[dev_index][index].desc_in_use ) /* complete tx processing */ ++ { ++ break; ++ } ++ ++ for (;;) ++ { ++ if (tp->tx_finished_desc->frame_ctrl.bits_tx_in.own == CPU) ++ { ++ #if (GMAC_DEBUG==1) ++ if ( (tp->tx_finished_desc->frame_ctrl.bits_tx_in.derr) || ++ (tp->tx_finished_desc->frame_ctrl.bits_tx_in.perr) ) ++ { ++ printk("%s::Descriptor Processing Error !!!\n",__func__); ++ } ++ #endif ++ if (tp->tx_finished_desc->frame_ctrl.bits_tx_in.success_tx == 1) ++ { ++ tp->stats.tx_bytes += tp->tx_finished_desc->flag_status.bits_tx_flag.frame_count; ++ tp->stats.tx_packets ++; ++ } ++ else ++ { ++ tp->stats.tx_errors++; ++ } ++ desc_cnt = tp->tx_finished_desc->frame_ctrl.bits_tx_in.desc_count; ++ for (i=1; itx_finished_desc - tx_desc_start_adr[dev_index]) / sizeof(GMAC_DESCRIPTOR_T); ++ tp->tx_finished_desc->frame_ctrl.bits_tx_in.own = CPU; ++ free_tx_buf(dev_index, index); ++ tx_skb[dev_index][index].desc_in_use = 0; ++ /* release Tx descriptor to CPU */ ++ tp->tx_finished_desc = (GMAC_DESCRIPTOR_T *)((tp->tx_finished_desc->next_desc.next_descriptor & 0xfffffff0)+tx_desc_virtual_base[dev_index]); ++ } ++ /* get tx skb buffer index */ ++ index = ((unsigned int)tp->tx_finished_desc - tx_desc_start_adr[dev_index]) / sizeof(GMAC_DESCRIPTOR_T); ++ /* free skb buffer */ ++ tp->tx_finished_desc->frame_ctrl.bits_tx_in.own = CPU; ++ free_tx_buf(dev_index, index); ++ tx_skb[dev_index][index].desc_in_use = 0; ++ tp->tx_finished_desc = (GMAC_DESCRIPTOR_T *)((tp->tx_finished_desc->next_desc.next_descriptor & 0xfffffff0)+tx_desc_virtual_base[dev_index]); ++ ++ if (tp->tx_finished_desc == tx_hw_complete_desc ) ++ { ++ break; ++ } ++ } ++ else ++ { ++ break; ++ } ++ } ++ } ++ ++ if (netif_queue_stopped(dev)) ++ { ++ netif_wake_queue(dev); ++ } ++ ++} ++#endif ++#else ++ ++static void gmac_tx_packet_complete(struct net_device *dev) ++{ ++ struct gmac_private *tp = dev->priv; ++ GMAC_DESCRIPTOR_T *tx_hw_complete_desc; ++ unsigned int desc_cnt=0; ++ unsigned int i,index,dev_index; ++ ++ dev_index = gmac_select_interface(dev); ++ ++ /* get tx H/W completed descriptor virtual address */ ++ tx_hw_complete_desc = (GMAC_DESCRIPTOR_T *)((gmac_read_reg(gmac_base_addr[dev_index] + GMAC_TXDMA_CURR_DESC) & 0xfffffff0)+ tx_desc_virtual_base[dev_index]); ++ /* check tx status and accumulate tx statistics */ ++ for (;;) ++ { ++ if (tp->tx_finished_desc == tx_hw_complete_desc) /* complete tx processing */ ++ { ++ break; ++ } ++ if (tp->tx_finished_desc->frame_ctrl.bits_tx_in.own == CPU) ++ { ++#if (GMAC_DEBUG==1) ++ if ( (tp->tx_finished_desc->frame_ctrl.bits_tx_in.derr) || ++ (tp->tx_finished_desc->frame_ctrl.bits_tx_in.perr) ) ++ { ++ printk("%s::Descriptor Processing Error !!!\n",__func__); ++ } ++#endif ++ if (tp->tx_finished_desc->frame_ctrl.bits_tx_in.success_tx == 1) ++ { ++ tp->stats.tx_bytes += tp->tx_finished_desc->flag_status.bits_tx_flag.frame_count; ++ tp->stats.tx_packets ++; ++ } ++ else ++ { ++ tp->stats.tx_errors++; ++ } ++ desc_cnt = tp->tx_finished_desc->frame_ctrl.bits_tx_in.desc_count; ++ for (i=1; itx_finished_desc - tx_desc_start_adr[dev_index]) / sizeof(GMAC_DESCRIPTOR_T); ++ /* free skb buffer */ ++ if (tx_skb[dev_index][index]) ++ { ++ dev_kfree_skb_irq(tx_skb[dev_index][index]); ++ } ++ /* release Tx descriptor to CPU */ ++ tp->tx_finished_desc = (GMAC_DESCRIPTOR_T *)((tp->tx_finished_desc->next_desc.next_descriptor & 0xfffffff0)+tx_desc_virtual_base[dev_index]); ++ tp->tx_finished_desc->frame_ctrl.bits_tx_in.own = CPU; ++ } ++ /* get tx skb buffer index */ ++ index = ((unsigned int)tp->tx_finished_desc - tx_desc_start_adr[dev_index]) / sizeof(GMAC_DESCRIPTOR_T); ++ /* free skb buffer */ ++ if (tx_skb[dev_index][index]) ++ { ++ dev_kfree_skb_irq(tx_skb[dev_index][index]); ++ } ++ tp->tx_finished_desc = (GMAC_DESCRIPTOR_T *)((tp->tx_finished_desc->next_desc.next_descriptor & 0xfffffff0)+tx_desc_virtual_base[dev_index]); ++ } ++ } ++ ++ if (netif_queue_stopped(dev)) ++ { ++ netif_wake_queue(dev); ++ } ++ ++} ++ ++ ++#endif ++ ++#if 0 ++static void gmac_weird_interrupt(struct net_device *dev) ++{ ++ gmac_dump_register(dev); ++} ++#endif ++ ++/* The interrupt handler does all of the Rx thread work and cleans up ++ after the Tx thread. */ ++static irqreturn_t gmac_interrupt (int irq, void *dev_instance, struct pt_regs *regs) ++{ ++ struct net_device *dev = (struct net_device *)dev_instance; ++ GMAC_RXDMA_FIRST_DESC_T rxdma_busy; ++// GMAC_TXDMA_FIRST_DESC_T txdma_busy; ++// GMAC_TXDMA_CTRL_T txdma_ctrl,txdma_ctrl_mask; ++ GMAC_RXDMA_CTRL_T rxdma_ctrl,rxdma_ctrl_mask; ++ GMAC_DMA_STATUS_T status; ++ unsigned int i,dev_index; ++ int handled = 0; ++ ++ dev_index = gmac_select_interface(dev); ++ ++ handled = 1; ++ ++#ifdef CONFIG_SL_NAPI ++ disable_irq(gmac_irq[dev_index]); /* disable GMAC interrupt */ ++ ++ status.bits32 = gmac_read_reg(gmac_base_addr[dev_index] + GMAC_DMA_STATUS); /* read DMA status */ ++ gmac_write_reg(gmac_base_addr[dev_index] + GMAC_DMA_STATUS,status.bits32,status.bits32); /* clear DMA status */ ++ ++ if (status.bits.rx_overrun == 1) ++ { ++ printk("%s::RX Overrun !!!%d\n",__func__,gmac_read_reg(gmac_base_addr[dev_index] + GMAC_RBNR)); ++ gmac_dump_register(dev); ++ /* if RX DMA process is stoped , restart it */ ++ rxdma_busy.bits32 = gmac_read_reg(gmac_base_addr[dev_index] + GMAC_RXDMA_FIRST_DESC) ; ++ if (rxdma_busy.bits.rd_busy == 0) ++ { ++ /* restart Rx DMA process */ ++ rxdma_ctrl.bits32 = 0; ++ rxdma_ctrl.bits.rd_start = 1; /* start RX DMA transfer */ ++ rxdma_ctrl.bits.rd_continue = 1; /* continue RX DMA operation */ ++ rxdma_ctrl_mask.bits32 = 0; ++ rxdma_ctrl_mask.bits.rd_start = 1; ++ rxdma_ctrl_mask.bits.rd_continue = 1; ++ gmac_write_reg(gmac_base_addr[dev_index] + GMAC_RXDMA_CTRL,rxdma_ctrl.bits32,rxdma_ctrl_mask.bits32); ++ } ++ } ++ ++ /* process rx packet */ ++ if (netif_running(dev) && ((status.bits.rs_eofi==1)||(status.bits.rs_finish==1))) ++ { ++ if (likely(netif_rx_schedule_prep(dev))) ++ { ++ gmac_write_reg(gmac_base_addr[dev_index] + GMAC_RXDMA_CTRL,0,0x0007c000); /* disable rx interrupt */ ++ __netif_rx_schedule(dev); ++ } ++ } ++#ifndef CONFIG_TXINT_DISABLE ++ /* process tx packet */ ++ if (netif_running(dev) && ((status.bits.ts_eofi==1)||(status.bits.ts_finish==1))) ++ { ++ gmac_tx_packet_complete(dev); ++ } ++#endif ++ ++ enable_irq(gmac_irq[dev_index]); /* enable GMAC interrupt */ ++ return IRQ_RETVAL(handled); ++#endif ++ ++ /* disable GMAC interrupt */ ++ disable_irq(gmac_irq[dev_index]); ++ for (i=0;ipriv; ++ GMAC_TXDMA_CURR_DESC_T tx_desc; ++ GMAC_RXDMA_CURR_DESC_T rx_desc; ++ GMAC_TXDMA_CTRL_T txdma_ctrl,txdma_ctrl_mask; ++ GMAC_RXDMA_CTRL_T rxdma_ctrl,rxdma_ctrl_mask; ++ GMAC_DMA_STATUS_T dma_status,dma_status_mask; ++ int dev_index; ++ ++ dev_index = gmac_select_interface(dev); ++ ++ /* program TxDMA Current Descriptor Address register for first descriptor */ ++ tx_desc.bits32 = (unsigned int)(tp->tx_desc_dma); ++ tx_desc.bits.eofie = 1; ++ tx_desc.bits.sof_eof = 0x03; ++ gmac_write_reg(gmac_base_addr[dev_index] + GMAC_TXDMA_CURR_DESC,tx_desc.bits32,0xffffffff); ++ gmac_write_reg(gmac_base_addr[dev_index] + 0xff2c,tx_desc.bits32,0xffffffff); /* tx next descriptor address */ ++ ++ /* program RxDMA Current Descriptor Address register for first descriptor */ ++ rx_desc.bits32 = (unsigned int)(tp->rx_desc_dma); ++ rx_desc.bits.eofie = 1; ++ rx_desc.bits.sof_eof = 0x03; ++ gmac_write_reg(gmac_base_addr[dev_index] + GMAC_RXDMA_CURR_DESC,rx_desc.bits32,0xffffffff); ++ gmac_write_reg(gmac_base_addr[dev_index] + 0xff3c,rx_desc.bits32,0xffffffff); /* rx next descriptor address */ ++ ++ /* enable GMAC interrupt & disable loopback */ ++ dma_status.bits32 = 0; ++ dma_status.bits.loop_back = 0; /* disable DMA loop-back mode */ ++// dma_status.bits.m_tx_fail = 1; ++ dma_status.bits.m_cnt_full = 1; ++ dma_status.bits.m_rx_pause_on = 1; ++ dma_status.bits.m_tx_pause_on = 1; ++ dma_status.bits.m_rx_pause_off = 1; ++ dma_status.bits.m_tx_pause_off = 1; ++ dma_status.bits.m_rx_overrun = 1; ++ dma_status.bits.m_link_change = 1; ++ dma_status_mask.bits32 = 0; ++ dma_status_mask.bits.loop_back = 1; ++// dma_status_mask.bits.m_tx_fail = 1; ++ dma_status_mask.bits.m_cnt_full = 1; ++ dma_status_mask.bits.m_rx_pause_on = 1; ++ dma_status_mask.bits.m_tx_pause_on = 1; ++ dma_status_mask.bits.m_rx_pause_off = 1; ++ dma_status_mask.bits.m_tx_pause_off = 1; ++ dma_status_mask.bits.m_rx_overrun = 1; ++ dma_status_mask.bits.m_link_change = 1; ++ gmac_write_reg(gmac_base_addr[dev_index] + GMAC_DMA_STATUS,dma_status.bits32,dma_status_mask.bits32); ++ ++ /* program tx dma control register */ ++ txdma_ctrl.bits32 = 0; ++ txdma_ctrl.bits.td_start = 0; /* start TX DMA transfer */ ++ txdma_ctrl.bits.td_continue = 0; /* continue Tx DMA operation */ ++ txdma_ctrl.bits.td_chain_mode = 1; /* chain mode */ ++ txdma_ctrl.bits.td_prot = 0; ++ txdma_ctrl.bits.td_burst_size = 2; /* DMA burst size for every AHB request */ ++ txdma_ctrl.bits.td_bus = 2; /* peripheral bus width */ ++ txdma_ctrl.bits.td_endian = 0; /* little endian */ ++#ifdef CONFIG_TXINT_DISABLE ++ txdma_ctrl.bits.td_finish_en = 0; /* DMA finish event interrupt disable */ ++#else ++ txdma_ctrl.bits.td_finish_en = 1; /* DMA finish event interrupt enable */ ++#endif ++ txdma_ctrl.bits.td_fail_en = 1; /* DMA fail interrupt enable */ ++ txdma_ctrl.bits.td_perr_en = 1; /* protocol failure interrupt enable */ ++ txdma_ctrl.bits.td_eod_en = 0; /* disable Tx End of Descriptor Interrupt */ ++ //txdma_ctrl.bits.td_eod_en = 0; /* disable Tx End of Descriptor Interrupt */ ++#ifdef CONFIG_TXINT_DISABLE ++ txdma_ctrl.bits.td_eof_en = 0; /* end of frame interrupt disable */ ++#else ++ txdma_ctrl.bits.td_eof_en = 1; /* end of frame interrupt enable */ ++#endif ++ txdma_ctrl_mask.bits32 = 0; ++ txdma_ctrl_mask.bits.td_start = 1; ++ txdma_ctrl_mask.bits.td_continue = 1; ++ txdma_ctrl_mask.bits.td_chain_mode = 1; ++ txdma_ctrl_mask.bits.td_prot = 15; ++ txdma_ctrl_mask.bits.td_burst_size = 3; ++ txdma_ctrl_mask.bits.td_bus = 3; ++ txdma_ctrl_mask.bits.td_endian = 1; ++ txdma_ctrl_mask.bits.td_finish_en = 1; ++ txdma_ctrl_mask.bits.td_fail_en = 1; ++ txdma_ctrl_mask.bits.td_perr_en = 1; ++ txdma_ctrl_mask.bits.td_eod_en = 1; ++ //txdma_ctrl_mask.bits.td_eod_en = 1; ++ txdma_ctrl_mask.bits.td_eof_en = 1; ++ gmac_write_reg(gmac_base_addr[dev_index] + GMAC_TXDMA_CTRL,txdma_ctrl.bits32,txdma_ctrl_mask.bits32); ++ ++ /* program rx dma control register */ ++ rxdma_ctrl.bits32 = 0; ++ rxdma_ctrl.bits.rd_start = 1; /* start RX DMA transfer */ ++ rxdma_ctrl.bits.rd_continue = 1; /* continue RX DMA operation */ ++ rxdma_ctrl.bits.rd_chain_mode = 1; /* chain mode */ ++ rxdma_ctrl.bits.rd_prot = 0; ++ rxdma_ctrl.bits.rd_burst_size = 2; /* DMA burst size for every AHB request */ ++ rxdma_ctrl.bits.rd_bus = 2; /* peripheral bus width */ ++ rxdma_ctrl.bits.rd_endian = 0; /* little endian */ ++ rxdma_ctrl.bits.rd_finish_en = 1; /* DMA finish event interrupt enable */ ++ rxdma_ctrl.bits.rd_fail_en = 1; /* DMA fail interrupt enable */ ++ rxdma_ctrl.bits.rd_perr_en = 1; /* protocol failure interrupt enable */ ++ rxdma_ctrl.bits.rd_eod_en = 0; /* disable Rx End of Descriptor Interrupt */ ++ rxdma_ctrl.bits.rd_eof_en = 1; /* end of frame interrupt enable */ ++ rxdma_ctrl_mask.bits32 = 0; ++ rxdma_ctrl_mask.bits.rd_start = 1; ++ rxdma_ctrl_mask.bits.rd_continue = 1; ++ rxdma_ctrl_mask.bits.rd_chain_mode = 1; ++ rxdma_ctrl_mask.bits.rd_prot = 15; ++ rxdma_ctrl_mask.bits.rd_burst_size = 3; ++ rxdma_ctrl_mask.bits.rd_bus = 3; ++ rxdma_ctrl_mask.bits.rd_endian = 1; ++ rxdma_ctrl_mask.bits.rd_finish_en = 1; ++ rxdma_ctrl_mask.bits.rd_fail_en = 1; ++ rxdma_ctrl_mask.bits.rd_perr_en = 1; ++ rxdma_ctrl_mask.bits.rd_eod_en = 1; ++ rxdma_ctrl_mask.bits.rd_eof_en = 1; ++ gmac_write_reg(gmac_base_addr[dev_index] + GMAC_RXDMA_CTRL,rxdma_ctrl.bits32,rxdma_ctrl_mask.bits32); ++ return; ++} ++ ++static void gmac_hw_stop(struct net_device *dev) ++{ ++ GMAC_TXDMA_CTRL_T txdma_ctrl,txdma_ctrl_mask; ++ GMAC_RXDMA_CTRL_T rxdma_ctrl,rxdma_ctrl_mask; ++ int dev_index; ++ ++ dev_index = gmac_select_interface(dev); ++ ++ /* program tx dma control register */ ++ txdma_ctrl.bits32 = 0; ++ txdma_ctrl.bits.td_start = 0; ++ txdma_ctrl.bits.td_continue = 0; ++ txdma_ctrl_mask.bits32 = 0; ++ txdma_ctrl_mask.bits.td_start = 1; ++ txdma_ctrl_mask.bits.td_continue = 1; ++ gmac_write_reg(gmac_base_addr[dev_index] + GMAC_TXDMA_CTRL,txdma_ctrl.bits32,txdma_ctrl_mask.bits32); ++ /* program rx dma control register */ ++ rxdma_ctrl.bits32 = 0; ++ rxdma_ctrl.bits.rd_start = 0; /* stop RX DMA transfer */ ++ rxdma_ctrl.bits.rd_continue = 0; /* stop continue RX DMA operation */ ++ rxdma_ctrl_mask.bits32 = 0; ++ rxdma_ctrl_mask.bits.rd_start = 1; ++ rxdma_ctrl_mask.bits.rd_continue = 1; ++ gmac_write_reg(gmac_base_addr[dev_index] + GMAC_RXDMA_CTRL,rxdma_ctrl.bits32,rxdma_ctrl_mask.bits32); ++} ++ ++static int gmac_init_desc_buf(struct net_device *dev) ++{ ++ struct gmac_private *tp = dev->priv; ++ struct sk_buff *skb; ++ dma_addr_t tx_first_desc_dma=0; ++ dma_addr_t rx_first_desc_dma=0; ++ dma_addr_t rx_first_buf_dma=0; ++ unsigned int i,index; ++ ++ printk("Descriptor buffer init......\n"); ++ ++ /* get device index number */ ++ index = gmac_get_dev_index(dev); ++#ifdef CONFIG_SL2312_MPAGE ++ for (i=0; itx_desc = DMA_MALLOC(TX_DESC_NUM*sizeof(GMAC_DESCRIPTOR_T),(dma_addr_t *)&tp->tx_desc_dma); ++ tx_desc_virtual_base[index] = (unsigned int)tp->tx_desc - (unsigned int)tp->tx_desc_dma; ++ memset(tp->tx_desc,0x00,TX_DESC_NUM*sizeof(GMAC_DESCRIPTOR_T)); ++ tp->rx_desc = DMA_MALLOC(RX_DESC_NUM*sizeof(GMAC_DESCRIPTOR_T),(dma_addr_t *)&tp->rx_desc_dma); ++ rx_desc_virtual_base[index] = (unsigned int)tp->rx_desc - (unsigned int)tp->rx_desc_dma; ++ memset(tp->rx_desc,0x00,RX_DESC_NUM*sizeof(GMAC_DESCRIPTOR_T)); ++ tx_desc_start_adr[index] = (unsigned int)tp->tx_desc; /* for tx skb index calculation */ ++ rx_desc_start_adr[index] = (unsigned int)tp->rx_desc; /* for rx skb index calculation */ ++ printk("tx_desc = %08x\n",(unsigned int)tp->tx_desc); ++ printk("rx_desc = %08x\n",(unsigned int)tp->rx_desc); ++ printk("tx_desc_dma = %08x\n",tp->tx_desc_dma); ++ printk("rx_desc_dma = %08x\n",tp->rx_desc_dma); ++ ++ if (tp->tx_desc==0x00 || tp->rx_desc==0x00) ++ { ++ free_irq(dev->irq, dev); ++ ++ if (tp->tx_desc) ++ DMA_MFREE(tp->tx_desc, TX_DESC_NUM*sizeof(GMAC_DESCRIPTOR_T),tp->tx_desc_dma); ++ if (tp->rx_desc) ++ DMA_MFREE(tp->rx_desc, RX_DESC_NUM*sizeof(GMAC_DESCRIPTOR_T),tp->rx_desc_dma); ++ return -ENOMEM; ++ } ++ ++ /* TX descriptors initial */ ++ tp->tx_cur_desc = tp->tx_desc; /* virtual address */ ++ tp->tx_finished_desc = tp->tx_desc; /* virtual address */ ++ tx_first_desc_dma = tp->tx_desc_dma; /* physical address */ ++ for (i = 1; i < TX_DESC_NUM; i++) ++ { ++ tp->tx_desc->frame_ctrl.bits_tx_out.own = CPU; /* set owner to CPU */ ++ tp->tx_desc->frame_ctrl.bits_tx_out.buffer_size = TX_BUF_SIZE; /* set tx buffer size for descriptor */ ++ tp->tx_desc_dma = tp->tx_desc_dma + sizeof(GMAC_DESCRIPTOR_T); /* next tx descriptor DMA address */ ++ tp->tx_desc->next_desc.next_descriptor = tp->tx_desc_dma | 0x0000000b; ++ tp->tx_desc = &tp->tx_desc[1] ; /* next tx descriptor virtual address */ ++ } ++ /* the last descriptor will point back to first descriptor */ ++ tp->tx_desc->frame_ctrl.bits_tx_out.own = CPU; ++ tp->tx_desc->frame_ctrl.bits_tx_out.buffer_size = TX_BUF_SIZE; ++ tp->tx_desc->next_desc.next_descriptor = tx_first_desc_dma | 0x0000000b; ++ tp->tx_desc = tp->tx_cur_desc; ++ tp->tx_desc_dma = tx_first_desc_dma; ++ ++ /* RX descriptors initial */ ++ tp->rx_cur_desc = tp->rx_desc; /* virtual address */ ++ rx_first_desc_dma = tp->rx_desc_dma; /* physical address */ ++ for (i = 1; i < RX_DESC_NUM; i++) ++ { ++ if ( (skb = dev_alloc_skb(RX_BUF_SIZE))==NULL) /* allocate socket buffer */ ++ { ++ printk("%s::skb buffer allocation fail !\n",__func__); ++ } ++ rx_skb[index][i-1] = skb; ++ tp->rx_desc->buf_adr = (unsigned int)__pa(skb->data) | 0x02; /* insert two bytes in the beginning of rx data */ ++ tp->rx_desc->frame_ctrl.bits_rx.own = DMA; /* set owner bit to DMA */ ++ tp->rx_desc->frame_ctrl.bits_rx.buffer_size = RX_BUF_SIZE; /* set rx buffer size for descriptor */ ++ tp->rx_bufs_dma = tp->rx_bufs_dma + RX_BUF_SIZE; /* point to next buffer address */ ++ tp->rx_desc_dma = tp->rx_desc_dma + sizeof(GMAC_DESCRIPTOR_T); /* next rx descriptor DMA address */ ++ tp->rx_desc->next_desc.next_descriptor = tp->rx_desc_dma | 0x0000000b; ++ tp->rx_desc = &tp->rx_desc[1]; /* next rx descriptor virtual address */ ++ } ++ /* the last descriptor will point back to first descriptor */ ++ if ( (skb = dev_alloc_skb(RX_BUF_SIZE))==NULL) /* allocate socket buffer */ ++ { ++ printk("%s::skb buffer allocation fail !\n",__func__); ++ } ++ rx_skb[index][i-1] = skb; ++ tp->rx_desc->buf_adr = (unsigned int)__pa(skb->data) | 0x02; /* insert two bytes in the beginning of rx data */ ++ tp->rx_desc->frame_ctrl.bits_rx.own = DMA; ++ tp->rx_desc->frame_ctrl.bits_rx.buffer_size = RX_BUF_SIZE; ++ tp->rx_desc->next_desc.next_descriptor = rx_first_desc_dma | 0x0000000b; ++ tp->rx_desc = tp->rx_cur_desc; ++ tp->rx_desc_dma = rx_first_desc_dma; ++ tp->rx_bufs_dma = rx_first_buf_dma; ++ ++ for (i=0; itx_desc_hdr[i] = 0; ++ tp->tx_desc_tail[i] = 0; ++ } ++ return (0); ++} ++ ++static int gmac_clear_counter (struct net_device *dev) ++{ ++ struct gmac_private *tp = dev->priv; ++ unsigned int dev_index; ++ ++ dev_index = gmac_select_interface(dev); ++// tp = gmac_dev[index]->priv; ++ /* clear counter */ ++ gmac_read_reg(gmac_base_addr[dev_index] + GMAC_IN_DISCARDS); ++ gmac_read_reg(gmac_base_addr[dev_index] + GMAC_IN_ERRORS); ++ tp->stats.tx_bytes = 0; ++ tp->stats.tx_packets = 0; ++ tp->stats.tx_errors = 0; ++ tp->stats.rx_bytes = 0; ++ tp->stats.rx_packets = 0; ++ tp->stats.rx_errors = 0; ++ tp->stats.rx_dropped = 0; ++ return (0); ++} ++ ++static int gmac_open (struct net_device *dev) ++{ ++ struct gmac_private *tp = dev->priv; ++ int retval; ++ ++ gmac_select_interface(dev); ++ ++ /* chip reset */ ++ gmac_sw_reset(dev); ++ ++ /* allocates tx/rx descriptor and buffer memory */ ++ gmac_init_desc_buf(dev); ++ ++ /* get mac address from FLASH */ ++ gmac_get_mac_address(); ++ ++ /* set PHY register to start autonegition process */ ++ gmac_set_phy_status(dev); ++ ++ /* GMAC initialization */ ++ if (gmac_init_chip(dev)) ++ { ++ printk (KERN_ERR "GMAC init fail\n"); ++ } ++ ++ /* start DMA process */ ++ gmac_hw_start(dev); ++ ++ /* enable tx/rx register */ ++ gmac_enable_tx_rx(dev); ++ ++ /* clear statistic counter */ ++ gmac_clear_counter(dev); ++ ++ netif_start_queue (dev); ++ ++ /* hook ISR */ ++ retval = request_irq (dev->irq, gmac_interrupt, SA_INTERRUPT, dev->name, dev); ++ if (retval) ++ return retval; ++ ++ if(!FLAG_SWITCH) ++ { ++ init_waitqueue_head (&tp->thr_wait); ++ init_completion(&tp->thr_exited); ++ ++ tp->time_to_die = 0; ++ tp->thr_pid = kernel_thread (gmac_phy_thread, dev, CLONE_FS | CLONE_FILES); ++ if (tp->thr_pid < 0) ++ { ++ printk (KERN_WARNING "%s: unable to start kernel thread\n",dev->name); ++ } ++ } ++ return (0); ++} ++ ++static int gmac_close(struct net_device *dev) ++{ ++ struct gmac_private *tp = dev->priv; ++ unsigned int i,dev_index; ++ unsigned int ret; ++ ++ dev_index = gmac_get_dev_index(dev); ++ ++ /* stop tx/rx packet */ ++ gmac_disable_tx_rx(dev); ++ ++ /* stop the chip's Tx and Rx DMA processes */ ++ gmac_hw_stop(dev); ++ ++ netif_stop_queue(dev); ++ ++ /* disable interrupts by clearing the interrupt mask */ ++ synchronize_irq(); ++ free_irq(dev->irq,dev); ++ ++ DMA_MFREE(tp->tx_desc, TX_DESC_NUM*sizeof(GMAC_DESCRIPTOR_T),(unsigned int)tp->tx_desc_dma); ++ DMA_MFREE(tp->rx_desc, RX_DESC_NUM*sizeof(GMAC_DESCRIPTOR_T),(unsigned int)tp->rx_desc_dma); ++ ++#ifdef CONFIG_SL2312_MPAGE ++// kfree(tx_skb); ++#endif ++ ++ for (i=0;ithr_pid >= 0) ++ { ++ tp->time_to_die = 1; ++ wmb(); ++ ret = kill_proc (tp->thr_pid, SIGTERM, 1); ++ if (ret) ++ { ++ printk (KERN_ERR "%s: unable to signal thread\n", dev->name); ++ return ret; ++ } ++// wait_for_completion (&tp->thr_exited); ++ } ++ } ++ ++ return (0); ++} ++ ++#ifdef CONFIG_SL2312_MPAGE ++int printk_all(int dev_index, struct gmac_private* tp) ++{ ++ int i=0; ++ unsigned int tx_current_descriptor = 0; ++ int hw_index; ++ int fi; ++ GMAC_DESCRIPTOR_T* tmp_desc; ++ ++ GMAC_DESCRIPTOR_T* cur_desc=tp->tx_cur_desc; ++ fi = ((unsigned int)cur_desc - tx_desc_start_adr[dev_index]) / sizeof(GMAC_DESCRIPTOR_T); ++ printk("tmp_desc %x, id %d\n", (int)cur_desc, fi); ++ ++ tmp_desc = (GMAC_DESCRIPTOR_T*)((gmac_read_reg(gmac_base_addr[dev_index] + GMAC_TXDMA_CURR_DESC) & 0xfffffff0) + tx_desc_virtual_base[dev_index]); ++ hw_index = ((unsigned int)tmp_desc - tx_desc_start_adr[dev_index])/ sizeof(GMAC_DESCRIPTOR_T); ++ printk("hd_desc %x, ind %d, fin desc %x\n",(int)tmp_desc, hw_index, (int)tp->tx_finished_desc); ++ ++ for (i=0; i ", fi, hw_index); ++ printk("fc %8x ", tmp_desc->frame_ctrl.bits32); ++ printk("fs %8x ", tmp_desc->flag_status.bits32); ++ printk("fb %8x ", tmp_desc->buf_adr); ++ printk("fd %8x\n", tmp_desc->next_desc.next_descriptor); ++ tmp_desc = (GMAC_DESCRIPTOR_T*)((tmp_desc->next_desc.next_descriptor & 0xfffffff0) + tx_desc_virtual_base[dev_index]); ++ fi = ((unsigned int)tmp_desc - tx_desc_start_adr[dev_index]) / sizeof(GMAC_DESCRIPTOR_T); ++ } ++ tx_current_descriptor = gmac_read_reg(gmac_base_addr[dev_index] + GMAC_TXDMA_CURR_DESC); ++ printk("%s: tx current descriptor = %x \n",__func__,tx_current_descriptor); ++ printk("%s: interrupt status = %x \n",__func__,int_status); ++ return 0; ++} ++ ++int cleanup_desc(int dev_index, struct gmac_private* tp) ++{ ++ int i=0; ++ int index = ((unsigned int)tp->tx_cur_desc - tx_desc_start_adr[dev_index])/sizeof(GMAC_DESCRIPTOR_T); ++ GMAC_DESCRIPTOR_T* fill_desc = tp->tx_cur_desc; ++ ++ for (i=0; i< TX_DESC_NUM; i++) ++ { ++ fill_desc->frame_ctrl.bits_tx_out.own = CPU; ++ fill_desc->frame_ctrl.bits_tx_out.buffer_size = TX_BUF_SIZE; ++ tx_skb[dev_index][index].desc_in_use = 0; ++ free_tx_buf(dev_index, index); ++ printk("cleanup di %d\n", index); ++ fill_desc = (GMAC_DESCRIPTOR_T*)((fill_desc->next_desc.next_descriptor & 0xfffffff0) + tx_desc_virtual_base[dev_index]); ++ index++; ++ if (index > TX_DESC_NUM) ++ index = 0; ++ } ++ return 1; ++} ++ ++size_t get_available_tx_desc(struct net_device* dev, int dev_index) ++{ ++ struct gmac_private *tp = dev->priv; ++ unsigned int desc_hdr = tp->tx_desc_hdr[dev_index]; ++ unsigned int desc_tail = tp->tx_desc_tail[dev_index]; ++ int available_desc_num = (TX_DESC_NUM - desc_hdr + desc_tail) & (TX_DESC_NUM-1); ++ if (!available_desc_num) { ++ if (tx_skb[dev_index][desc_hdr].desc_in_use) ++ return 0; ++ else ++ return TX_DESC_NUM; ++ } ++ return available_desc_num; ++} ++ ++int check_free_tx_desc(int dev_index, int n, GMAC_DESCRIPTOR_T* desc) ++{ ++ int i,index; ++ GMAC_DESCRIPTOR_T* tmp_desc = desc; ++ ++ if (n > TX_DESC_NUM) ++ return 0; ++ ++ index = ((unsigned int)tmp_desc - tx_desc_start_adr[dev_index])/sizeof(GMAC_DESCRIPTOR_T); ++ for (i=0; i> 12) & 0x000F) ++ ++inline int fill_in_desc(int dev_index, GMAC_DESCRIPTOR_T *desc, char* data, int len, int total_len, int sof, int freeable, int ownership, struct sk_buff* skb) ++{ ++ int index = ((unsigned int)desc - tx_desc_start_adr[dev_index]) / sizeof(GMAC_DESCRIPTOR_T); ++ ++ if (desc->frame_ctrl.bits_tx_in.own == CPU) ++ { ++ tx_skb[dev_index][index].freeable = freeable; ++ if ((sof & 0x01) && skb) { ++ tx_skb[dev_index][index].skb = skb; ++ } ++ else ++ tx_skb[dev_index][index].skb = 0; ++ ++ if (sof != 2) ++ tx_skb[dev_index][index].desc_in_use = 1; ++ else ++ tx_skb[dev_index][index].desc_in_use = 0; ++ ++ consistent_sync(data, len, PCI_DMA_TODEVICE); ++ desc->buf_adr = (unsigned int)__pa(data); ++ desc->frame_ctrl.bits_tx_out.buffer_size = len; ++ desc->flag_status.bits_tx_flag.frame_count = total_len; ++ desc->next_desc.bits.eofie = 1; ++ desc->next_desc.bits.sof_eof = sof; ++ desc->frame_ctrl.bits_tx_out.vlan_enable = 0; ++ desc->frame_ctrl.bits_tx_out.ip_csum_en = 1; /* TSS IPv4 IP header checksum enable */ ++ desc->frame_ctrl.bits_tx_out.ipv6_tx_en = 1; /* TSS IPv6 tx enable */ ++ desc->frame_ctrl.bits_tx_out.tcp_csum_en = 1; /* TSS TCP checksum enable */ ++ desc->frame_ctrl.bits_tx_out.udp_csum_en = 1; /* TSS UDP checksum enable */ ++ wmb(); ++ desc->frame_ctrl.bits_tx_out.own = ownership; ++// consistent_sync(desc, sizeof(GMAC_DESCRIPTOR_T), PCI_DMA_TODEVICE); ++ } ++ return 0; ++} ++#endif ++ ++static int gmac_start_xmit(struct sk_buff *skb, struct net_device *dev) ++{ ++ struct gmac_private *tp = dev->priv; ++ GMAC_TXDMA_CTRL_T tx_ctrl,tx_ctrl_mask; ++ GMAC_TXDMA_FIRST_DESC_T txdma_busy; ++ unsigned int len = skb->len; ++ unsigned int dev_index; ++ static unsigned int pcount = 0; ++#ifdef CONFIG_SL2312_MPAGE ++ GMAC_DESCRIPTOR_T *fill_desc; ++ int snd_pages = skb_shinfo(skb)->nr_frags; /* get number of descriptor */ ++ int desc_needed = 1; // for jumbo packet, one descriptor is enough. ++ int header_len = skb->len; ++ struct iphdr *ip_hdr; ++ struct tcphdr *tcp_hdr; ++ int tcp_hdr_len; ++ int data_len; ++ int prv_index; ++ long seq_num; ++ int first_desc_index; ++ int ownership, freeable; ++ int eof; ++ int i=0; ++#endif ++#ifdef CONFIG_TXINT_DISABLE ++ int available_desc_cnt = 0; ++#endif ++ ++ dev_index = gmac_select_interface(dev); ++ ++#ifdef CONFIG_TXINT_DISABLE ++ available_desc_cnt = get_available_tx_desc(dev, dev_index); ++ ++ if (available_desc_cnt < (TX_DESC_NUM >> 2)) { ++ gmac_tx_packet_complete(dev); ++ } ++#endif ++ ++#ifdef CONFIG_SL2312_MPAGE ++ ++ fill_desc = tp->tx_cur_desc; ++ if(!fill_desc) { ++ printk("cur_desc is NULL!\n"); ++ return -1; ++ } ++ ++ if (storlink_ctl.recvfile==2) ++ { ++ printk("snd_pages=%d skb->len=%d\n",snd_pages,skb->len); ++ } ++ ++ if (snd_pages) ++ desc_needed += snd_pages; /* decriptors needed for this large packet */ ++ ++ if (!check_free_tx_desc(dev_index, desc_needed, fill_desc)) { ++ printk("no available desc!\n"); ++ gmac_dump_register(dev); ++ printk_all(dev_index, tp); ++ tp->stats.tx_dropped++; ++ if (pcount++ > 10) ++ { ++ for (;;); ++ } ++ return -1; ++ } ++ ++ first_desc_index = ((unsigned int)fill_desc - tx_desc_start_adr[dev_index]) / sizeof(GMAC_DESCRIPTOR_T); ++ ++ /* check if the tcp packet is in order*/ ++ ip_hdr = (struct iphdr*) &(skb->data[14]); ++ tcp_hdr = (struct tcphdr*) &(skb->data[14+ip_hdr->ihl * 4]); ++ tcp_hdr_len = TCPHDRLEN(tcp_hdr) * 4; ++ data_len = skb->len - 14 - ip_hdr->ihl *4 - tcp_hdr_len; ++ ++ prv_index = first_desc_index-1; ++ if (prv_index <0) ++ prv_index += TX_DESC_NUM; ++ seq_num = ntohl(tcp_hdr->seq); ++ ++ if (snd_pages) ++ { ++ // calculate header length ++ // check fragment total length and header len = skb len - frag len ++ // or parse the header. ++ for (i=0; ifrags[i]; ++ header_len -= frag->size; ++ } ++ ownership = CPU; ++ freeable = 0; ++ /* fill header into first descriptor */ ++ fill_in_desc(dev_index, fill_desc, skb->data, header_len, len, 2, freeable, ownership, 0); ++ fill_desc = (GMAC_DESCRIPTOR_T*)((fill_desc->next_desc.next_descriptor & 0xfffffff0) + tx_desc_virtual_base[dev_index]); ++ tx_skb[dev_index][first_desc_index].end_seq = seq_num + data_len; ++ ++ eof = 0; ++ ownership = DMA; ++ for (i=0; ifrags[i]; ++ int start_pos = frag->page_offset; ++ char* data_buf = page_address(frag->page); ++ int data_size = frag->size; ++ int cur_index; ++ ++ if (i == snd_pages-1) ++ { ++ eof=1; ++ freeable = 1; ++ } ++ fill_in_desc(dev_index, fill_desc, data_buf+(start_pos), data_size, ++ len, eof, freeable, ownership, skb); ++ cur_index = ((unsigned int)fill_desc - tx_desc_start_adr[dev_index]) / sizeof(GMAC_DESCRIPTOR_T); ++ ++ fill_desc = (GMAC_DESCRIPTOR_T*)((fill_desc->next_desc.next_descriptor & 0xfffffff0) + tx_desc_virtual_base[dev_index]); ++ } ++ /* pass the ownership of the first descriptor to hardware */ ++// disable_irq(gmac_irq[dev_index]); ++ tx_skb[dev_index][first_desc_index].desc_in_use = 1; ++ wmb(); ++ tp->tx_cur_desc->frame_ctrl.bits_tx_out.own = DMA; ++// consistent_sync(tp->tx_cur_desc, sizeof(GMAC_DESCRIPTOR_T), PCI_DMA_TODEVICE); ++ tp->tx_cur_desc = fill_desc; ++ dev->trans_start = jiffies; ++// enable_irq(gmac_irq[dev_index]); ++ } ++ else if ( tp->tx_cur_desc->frame_ctrl.bits_tx_out.own == CPU ) ++ { ++// tx_skb[dev_index][first_desc_index].end_seq = seq_num + data_len; ++// disable_irq(gmac_irq[dev_index]); ++ fill_in_desc(dev_index, tp->tx_cur_desc, skb->data, skb->len, skb->len, 3, 1, DMA, skb); ++// enable_irq(gmac_irq[dev_index]); ++ //consistent_sync(tp->tx_cur_desc, sizeof(GMAC_DESCRIPTOR_T), PCI_DMA_TODEVICE); ++ tp->tx_cur_desc = (GMAC_DESCRIPTOR_T*)((tp->tx_cur_desc->next_desc.next_descriptor & 0xfffffff0) + tx_desc_virtual_base[dev_index]); ++ dev->trans_start = jiffies; ++ } ++ else ++ { ++ printk("gmac tx drop!\n"); ++ tp->stats.tx_dropped++; ++ return -1; ++ } ++ ++#ifdef CONFIG_TXINT_DISABLE ++ tp->tx_desc_hdr[dev_index] = (tp->tx_desc_hdr[dev_index] + desc_needed) & (TX_DESC_NUM-1); ++#endif ++ ++#else ++ if ((tp->tx_cur_desc->frame_ctrl.bits_tx_out.own == CPU) && (len < TX_BUF_SIZE)) ++ { ++ index = ((unsigned int)tp->tx_cur_desc - tx_desc_start_adr[dev_index]) / sizeof(GMAC_DESCRIPTOR_T); ++ tx_skb[dev_index][index] = skb; ++ consistent_sync(skb->data,skb->len,PCI_DMA_TODEVICE); ++ tp->tx_cur_desc->buf_adr = (unsigned int)__pa(skb->data); ++ tp->tx_cur_desc->flag_status.bits_tx_flag.frame_count = len; /* total frame byte count */ ++ tp->tx_cur_desc->next_desc.bits.sof_eof = 0x03; /*only one descriptor*/ ++ tp->tx_cur_desc->frame_ctrl.bits_tx_out.buffer_size = len; /* descriptor byte count */ ++ tp->tx_cur_desc->frame_ctrl.bits_tx_out.vlan_enable = 0; ++ tp->tx_cur_desc->frame_ctrl.bits_tx_out.ip_csum_en = 0; /* TSS IPv4 IP header checksum enable */ ++ tp->tx_cur_desc->frame_ctrl.bits_tx_out.ipv6_tx_en = 0 ; /* TSS IPv6 tx enable */ ++ tp->tx_cur_desc->frame_ctrl.bits_tx_out.tcp_csum_en = 0; /* TSS TCP checksum enable */ ++ tp->tx_cur_desc->frame_ctrl.bits_tx_out.udp_csum_en = 0; /* TSS UDP checksum enable */ ++ wmb(); ++ tp->tx_cur_desc->frame_ctrl.bits_tx_out.own = DMA; /* set owner bit */ ++ tp->tx_cur_desc = (GMAC_DESCRIPTOR_T *)((tp->tx_cur_desc->next_desc.next_descriptor & 0xfffffff0)+tx_desc_virtual_base[dev_index]); ++ dev->trans_start = jiffies; ++ } ++ else ++ { ++ /* no free tx descriptor */ ++ dev_kfree_skb(skb); ++ netif_stop_queue(dev); ++ tp->stats.tx_dropped++; ++ return (-1); ++ } ++#endif ++ /* if TX DMA process is stoped , restart it */ ++ txdma_busy.bits32 = gmac_read_reg(gmac_base_addr[dev_index] + GMAC_TXDMA_FIRST_DESC); ++ if (txdma_busy.bits.td_busy == 0) ++ { ++ /* restart DMA process */ ++ tx_ctrl.bits32 = 0; ++ tx_ctrl.bits.td_start = 1; ++ tx_ctrl.bits.td_continue = 1; ++ tx_ctrl_mask.bits32 = 0; ++ tx_ctrl_mask.bits.td_start = 1; ++ tx_ctrl_mask.bits.td_continue = 1; ++ gmac_write_reg(gmac_base_addr[dev_index] + GMAC_TXDMA_CTRL,tx_ctrl.bits32,tx_ctrl_mask.bits32); ++ } ++ return (0); ++} ++ ++ ++struct net_device_stats * gmac_get_stats(struct net_device *dev) ++{ ++ struct gmac_private *tp = dev->priv; ++ unsigned long flags; ++ unsigned int pkt_drop; ++ unsigned int pkt_error; ++ unsigned int dev_index; ++ ++ dev_index = gmac_select_interface(dev); ++ ++// if (storlink_ctl.recvfile==3) ++// { ++// printk("GMAC_GLOBAL_BASE_ADDR=%x\n", readl(GMAC_GLOBAL_BASE_ADDR+0x30)); ++// gmac_dump_register(dev); ++// printk_all(0, dev); ++// } ++ ++ if (netif_running(dev)) ++ { ++ /* read H/W counter */ ++ spin_lock_irqsave(&tp->lock,flags); ++ pkt_drop = gmac_read_reg(gmac_base_addr[dev_index] + GMAC_IN_DISCARDS); ++ pkt_error = gmac_read_reg(gmac_base_addr[dev_index] + GMAC_IN_ERRORS); ++ tp->stats.rx_dropped = tp->stats.rx_dropped + pkt_drop; ++ tp->stats.rx_errors = tp->stats.rx_errors + pkt_error; ++ spin_unlock_irqrestore(&tp->lock,flags); ++ } ++ return &tp->stats; ++} ++ ++static unsigned const ethernet_polynomial = 0x04c11db7U; ++static inline u32 ether_crc (int length, unsigned char *data) ++{ ++ int crc = -1; ++ unsigned int i; ++ unsigned int crc_val=0; ++ ++ while (--length >= 0) { ++ unsigned char current_octet = *data++; ++ int bit; ++ for (bit = 0; bit < 8; bit++, current_octet >>= 1) ++ crc = (crc << 1) ^ ((crc < 0) ^ (current_octet & 1) ? ++ ethernet_polynomial : 0); ++ } ++ crc = ~crc; ++ for (i=0;i<32;i++) ++ { ++ crc_val = crc_val + (((crc << i) & 0x80000000) >> (31-i)); ++ } ++ return crc_val; ++} ++ ++static void gmac_set_rx_mode(struct net_device *dev) ++{ ++ GMAC_RX_FLTR_T filter; ++ unsigned int mc_filter[2]; /* Multicast hash filter */ ++ int bit_nr; ++ unsigned int i, dev_index; ++ ++ dev_index = gmac_select_interface(dev); ++ ++// printk("%s : dev->flags = %x \n",__func__,dev->flags); ++// dev->flags |= IFF_ALLMULTI; /* temp */ ++ filter.bits32 = 0; ++ filter.bits.error = 0; ++ if (dev->flags & IFF_PROMISC) ++ { ++ filter.bits.error = 1; ++ filter.bits.promiscuous = 1; ++ filter.bits.broadcast = 1; ++ filter.bits.multicast = 1; ++ filter.bits.unicast = 1; ++ mc_filter[1] = mc_filter[0] = 0xffffffff; ++ } ++ else if (dev->flags & IFF_ALLMULTI) ++ { ++ filter.bits.promiscuous = 1; ++ filter.bits.broadcast = 1; ++ filter.bits.multicast = 1; ++ filter.bits.unicast = 1; ++ mc_filter[1] = mc_filter[0] = 0xffffffff; ++ } ++ else ++ { ++ struct dev_mc_list *mclist; ++ ++ filter.bits.promiscuous = 1; ++ filter.bits.broadcast = 1; ++ filter.bits.multicast = 1; ++ filter.bits.unicast = 1; ++ mc_filter[1] = mc_filter[0] = 0; ++ for (i = 0, mclist = dev->mc_list; mclist && i < dev->mc_count;i++, mclist = mclist->next) ++ { ++ bit_nr = ether_crc(ETH_ALEN,mclist->dmi_addr) & 0x0000003f; ++ if (bit_nr < 32) ++ { ++ mc_filter[0] = mc_filter[0] | (1<dev_addr[i] = sock->sa_data[i]; ++ } ++ ++ reg_val = dev->dev_addr[0] + (dev->dev_addr[1]<<8) + (dev->dev_addr[2]<<16) + (dev->dev_addr[3]<<24); ++ gmac_write_reg(gmac_base_addr[dev_index] + GMAC_STA_ADD0,reg_val,0xffffffff); ++ reg_val = dev->dev_addr[4] + (dev->dev_addr[5]<<8) ; ++ gmac_write_reg(gmac_base_addr[dev_index] + GMAC_STA_ADD1,reg_val,0x0000ffff); ++ memcpy(ð0_mac[0],&dev->dev_addr[0],6); ++ printk("Storlink %s address = ",dev->name); ++ printk("%02x",dev->dev_addr[0]); ++ printk("%02x",dev->dev_addr[1]); ++ printk("%02x",dev->dev_addr[2]); ++ printk("%02x",dev->dev_addr[3]); ++ printk("%02x",dev->dev_addr[4]); ++ printk("%02x\n",dev->dev_addr[5]); ++ ++ return (0); ++} ++ ++static void gmac_tx_timeout(struct net_device *dev) ++{ ++ GMAC_TXDMA_CTRL_T tx_ctrl,tx_ctrl_mask; ++ GMAC_TXDMA_FIRST_DESC_T txdma_busy; ++ int dev_index; ++ ++ dev_index = gmac_select_interface(dev); ++ ++ /* if TX DMA process is stoped , restart it */ ++ txdma_busy.bits32 = gmac_read_reg(gmac_base_addr[dev_index] + GMAC_TXDMA_FIRST_DESC); ++ if (txdma_busy.bits.td_busy == 0) ++ { ++ /* restart DMA process */ ++ tx_ctrl.bits32 = 0; ++ tx_ctrl.bits.td_start = 1; ++ tx_ctrl.bits.td_continue = 1; ++ tx_ctrl_mask.bits32 = 0; ++ tx_ctrl_mask.bits.td_start = 1; ++ tx_ctrl_mask.bits.td_continue = 1; ++ gmac_write_reg(gmac_base_addr[dev_index] + GMAC_TXDMA_CTRL,tx_ctrl.bits32,tx_ctrl_mask.bits32); ++ } ++ netif_wake_queue(dev); ++ return; ++} ++ ++static int gmac_netdev_ioctl(struct net_device *dev, struct ifreq *rq, int cmd) ++{ ++ int rc = 0; ++ unsigned char *hwa = rq->ifr_ifru.ifru_hwaddr.sa_data; ++ ++ if (!netif_running(dev)) ++ { ++ printk("Before changing the H/W address,please down the device.\n"); ++ return -EINVAL; ++ } ++ ++ switch (cmd) { ++ case SIOCETHTOOL: ++ break; ++ ++ case SIOCSIFHWADDR: ++ gmac_set_mac_address(dev,hwa); ++ break; ++ ++ case SIOCGMIIPHY: /* Get the address of the PHY in use. */ ++ case SIOCDEVPRIVATE: /* binary compat, remove in 2.5 */ ++ break; ++ ++ case SIOCGMIIREG: /* Read the specified MII register. */ ++ case SIOCDEVPRIVATE+1: ++ break; ++ ++ case SIOCSMIIREG: /* Write the specified MII register */ ++ case SIOCDEVPRIVATE+2: ++ break; ++ ++ default: ++ rc = -EOPNOTSUPP; ++ break; ++ } ++ ++ return rc; ++} ++ ++static void gmac_cleanup_module(void) ++{ ++ int i; ++ ++ for (i=0;ipriv; ++ ++ dev[i]->base_addr = gmac_base_addr[i]; ++ dev[i]->irq = gmac_irq[i]; ++ dev[i]->open = gmac_open; ++ dev[i]->stop = gmac_close; ++ dev[i]->hard_start_xmit = gmac_start_xmit; ++ dev[i]->get_stats = gmac_get_stats; ++ dev[i]->set_multicast_list = gmac_set_rx_mode; ++ dev[i]->set_mac_address = gmac_set_mac_address; ++ dev[i]->do_ioctl = gmac_netdev_ioctl; ++ dev[i]->tx_timeout = gmac_tx_timeout; ++ dev[i]->watchdog_timeo = TX_TIMEOUT; ++ dev[i]->features |= NETIF_F_SG|NETIF_F_HW_CSUM|NETIF_F_TSO; ++#ifdef CONFIG_SL_NAPI ++ printk("NAPI driver is enabled.\n"); ++ if (i==0) ++ { ++ dev[i]->poll = gmac_rx_poll_ga; ++ dev[i]->weight = 64; ++ } ++ else ++ { ++ dev[i]->poll = gmac_rx_poll_gb; ++ dev[i]->weight = 64; ++ } ++#endif ++ ++ if (register_netdev(dev[i])) ++ { ++ gmac_cleanup_module(); ++ return(-1); ++ } ++ } ++ ++#ifdef CONFIG_SL3516_ASIC ++{ ++ unsigned int val; ++ ++ /* set GMAC global register */ ++ val = readl(GMAC_GLOBAL_BASE_ADDR+0x10); ++ val = val | 0x005a0000; ++ writel(val,GMAC_GLOBAL_BASE_ADDR+0x10); ++ writel(0x07f007f0,GMAC_GLOBAL_BASE_ADDR+0x1c); ++ writel(0x77770000,GMAC_GLOBAL_BASE_ADDR+0x20); ++ writel(0x77770000,GMAC_GLOBAL_BASE_ADDR+0x24); ++ val = readl(GMAC_GLOBAL_BASE_ADDR+0x04); ++ if((val&(1<<20))==0){ // GMAC1 enable ++ val = readl(GMAC_GLOBAL_BASE_ADDR+0x30); ++ val = (val & 0xe7ffffff) | 0x08000000; ++ writel(val,GMAC_GLOBAL_BASE_ADDR+0x30); ++ } ++ ++} ++#endif ++ ++// printk("%s: dev0=%x dev1=%x \n",__func__,dev[0],dev[1]); ++// FLAG_SWITCH = 0 ; ++// FLAG_SWITCH = SPI_get_identifier(); ++// if(FLAG_SWITCH) ++// { ++// printk("Configure ADM699X...\n"); ++// SPI_default(); //Add by jason for ADM699X configuration ++// } ++ return (0); ++} ++ ++ ++module_init(gmac_init_module); ++module_exit(gmac_cleanup_module); ++ ++static int gmac_phy_thread (void *data) ++{ ++ struct net_device *dev = data; ++ struct gmac_private *tp = dev->priv; ++ unsigned long timeout; ++ ++ daemonize("%s", dev->name); ++ allow_signal(SIGTERM); ++// reparent_to_init(); ++// spin_lock_irq(¤t->sigmask_lock); ++// sigemptyset(¤t->blocked); ++// recalc_sigpending(current); ++// spin_unlock_irq(¤t->sigmask_lock); ++// strncpy (current->comm, dev->name, sizeof(current->comm) - 1); ++// current->comm[sizeof(current->comm) - 1] = '\0'; ++ ++ while (1) ++ { ++ timeout = next_tick; ++ do ++ { ++ timeout = interruptible_sleep_on_timeout (&tp->thr_wait, timeout); ++ } while (!signal_pending (current) && (timeout > 0)); ++ ++ if (signal_pending (current)) ++ { ++// spin_lock_irq(¤t->sigmask_lock); ++ flush_signals(current); ++// spin_unlock_irq(¤t->sigmask_lock); ++ } ++ ++ if (tp->time_to_die) ++ break; ++ ++// printk("%s : Polling PHY Status...%x\n",__func__,dev); ++ rtnl_lock (); ++ gmac_get_phy_status(dev); ++ rtnl_unlock (); ++ } ++ complete_and_exit (&tp->thr_exited, 0); ++} ++ ++static void gmac_set_phy_status(struct net_device *dev) ++{ ++ GMAC_STATUS_T status; ++ unsigned int reg_val; ++ unsigned int i = 0; ++ unsigned int index; ++ ++ if (FLAG_SWITCH==1) ++ { ++ return; /* GMAC connects to a switch chip, not PHY */ ++ } ++ ++ index = gmac_get_dev_index(dev); ++ ++ if (index == 0) ++ { ++// mii_write(phy_addr[index],0x04,0x0461); /* advertisement 10M full duplex, pause capable on */ ++// mii_write(phy_addr[index],0x04,0x0421); /* advertisement 10M half duplex, pause capable on */ ++ mii_write(phy_addr[index],0x04,0x05e1); /* advertisement 100M full duplex, pause capable on */ ++// mii_write(phy_addr[index],0x04,0x04a1); /* advertisement 100M half duplex, pause capable on */ ++#ifdef CONFIG_SL3516_ASIC ++ mii_write(phy_addr[index],0x09,0x0300); /* advertisement 1000M full duplex, pause capable on */ ++// mii_write(phy_addr[index],0x09,0x0000); /* advertisement 1000M full duplex, pause capable on */ ++#endif ++ } ++ else ++ { ++// mii_write(phy_addr[index],0x04,0x0461); /* advertisement 10M full duplex, pause capable on */ ++// mii_write(phy_addr[index],0x04,0x0421); /* advertisement 10M half duplex, pause capable on */ ++ mii_write(phy_addr[index],0x04,0x05e1); /* advertisement 100M full duplex, pause capable on */ ++// mii_write(phy_addr[index],0x04,0x04a1); /* advertisement 100M half duplex, pause capable on */ ++#ifdef CONFIG_SL3516_ASIC ++// mii_write(phy_addr[index],0x09,0x0000); /* advertisement no 1000M */ ++ mii_write(phy_addr[index],0x09,0x0300); /* advertisement 1000M full duplex, pause capable on */ ++#endif ++ } ++ ++ mii_write(phy_addr[index],0x00,0x1200); /* Enable and Restart Auto-Negotiation */ ++ mii_write(phy_addr[index],0x18,0x0041); /* Enable Active led */ ++ while (((reg_val=mii_read(phy_addr[index],0x01)) & 0x00000004)!=0x04) ++ { ++ i++; ++ if (i > 30) ++ { ++ break; ++ } ++ msleep(100); ++ } ++ if (i>30) ++ { ++ pre_phy_status[index] = LINK_DOWN; ++ clear_bit(__LINK_STATE_START, &dev->state); ++ netif_stop_queue(dev); ++ storlink_ctl.link = 0; ++ printk("Link Down (%04x) ",reg_val); ++ } ++ else ++ { ++ pre_phy_status[index] = LINK_UP; ++ set_bit(__LINK_STATE_START, &dev->state); ++ netif_wake_queue(dev); ++ storlink_ctl.link = 1; ++ printk("Link Up (%04x) ",reg_val); ++ } ++ ++ status.bits32 = 0; ++ reg_val = mii_read(phy_addr[index],10); ++ printk("reg_val0 = %x \n",reg_val); ++ if ((reg_val & 0x0800) == 0x0800) ++ { ++ status.bits.duplex = 1; ++ status.bits.speed = 2; ++ printk(" 1000M/Full \n"); ++ } ++ else if ((reg_val & 0x0400) == 0x0400) ++ { ++ status.bits.duplex = 0; ++ status.bits.speed = 2; ++ printk(" 1000M/Half \n"); ++ } ++ else ++ { ++ reg_val = (mii_read(phy_addr[index],0x05) & 0x05E0) >> 5; ++ printk("reg_val1 = %x \n",reg_val); ++ if ((reg_val & 0x08)==0x08) /* 100M full duplex */ ++ { ++ status.bits.duplex = 1; ++ status.bits.speed = 1; ++ printk(" 100M/Full \n"); ++ } ++ else if ((reg_val & 0x04)==0x04) /* 100M half duplex */ ++ { ++ status.bits.duplex = 0; ++ status.bits.speed = 1; ++ printk(" 100M/Half \n"); ++ } ++ else if ((reg_val & 0x02)==0x02) /* 10M full duplex */ ++ { ++ status.bits.duplex = 1; ++ status.bits.speed = 0; ++ printk(" 10M/Full \n"); ++ } ++ else if ((reg_val & 0x01)==0x01) /* 10M half duplex */ ++ { ++ status.bits.duplex = 0; ++ status.bits.speed = 0; ++ printk(" 100M/Half \n"); ++ } ++ } ++ ++ reg_val = (mii_read(phy_addr[index],0x05) & 0x05E0) >> 5; ++ if ((reg_val & 0x20)==0x20) ++ { ++ flow_control_enable[index] = 1; ++ printk("Flow Control Enable. \n"); ++ } ++ else ++ { ++ flow_control_enable[index] = 0; ++ printk("Flow Control Disable. \n"); ++ } ++ full_duplex = status.bits.duplex; ++ speed = status.bits.speed; ++} ++ ++static void gmac_get_phy_status(struct net_device *dev) ++{ ++ GMAC_CONFIG0_T config0,config0_mask; ++ GMAC_STATUS_T status; ++ unsigned int reg_val; ++ unsigned int index; ++ ++ index = gmac_select_interface(dev); ++ ++ status.bits32 = 0; ++ status.bits.phy_mode = 1; ++ ++#ifdef CONFIG_SL3516_ASIC ++ status.bits.mii_rmii = 2; /* default value for ASIC version */ ++// status.bits.speed = 1; ++#else ++ if (index==0) ++ status.bits.mii_rmii = 0; ++ else ++ status.bits.mii_rmii = 2; ++#endif ++ ++ /* read PHY status register */ ++ reg_val = mii_read(phy_addr[index],0x01); ++ if ((reg_val & 0x0024) == 0x0024) /* link is established and auto_negotiate process completed */ ++ { ++ /* read PHY Auto-Negotiation Link Partner Ability Register */ ++ reg_val = mii_read(phy_addr[index],10); ++ if ((reg_val & 0x0800) == 0x0800) ++ { ++ status.bits.mii_rmii = 3; /* RGMII 1000Mbps mode */ ++ status.bits.duplex = 1; ++ status.bits.speed = 2; ++ } ++ else if ((reg_val & 0x0400) == 0x0400) ++ { ++ status.bits.mii_rmii = 3; /* RGMII 1000Mbps mode */ ++ status.bits.duplex = 0; ++ status.bits.speed = 2; ++ } ++ else ++ { ++ reg_val = (mii_read(phy_addr[index],0x05) & 0x05E0) >> 5; ++ if ((reg_val & 0x08)==0x08) /* 100M full duplex */ ++ { ++ status.bits.mii_rmii = 2; /* RGMII 10/100Mbps mode */ ++ status.bits.duplex = 1; ++ status.bits.speed = 1; ++ } ++ else if ((reg_val & 0x04)==0x04) /* 100M half duplex */ ++ { ++ status.bits.mii_rmii = 2; /* RGMII 10/100Mbps mode */ ++ status.bits.duplex = 0; ++ status.bits.speed = 1; ++ } ++ else if ((reg_val & 0x02)==0x02) /* 10M full duplex */ ++ { ++ status.bits.mii_rmii = 2; /* RGMII 10/100Mbps mode */ ++ status.bits.duplex = 1; ++ status.bits.speed = 0; ++ } ++ else if ((reg_val & 0x01)==0x01) /* 10M half duplex */ ++ { ++ status.bits.mii_rmii = 2; /* RGMII 10/100Mbps mode */ ++ status.bits.duplex = 0; ++ status.bits.speed = 0; ++ } ++ } ++ status.bits.link = LINK_UP; /* link up */ ++ netif_wake_queue(dev); ++ ++ reg_val = (mii_read(phy_addr[index],0x05) & 0x05E0) >> 5; ++ if ((reg_val & 0x20)==0x20) ++ { ++ if (flow_control_enable[index] == 0) ++ { ++ config0.bits32 = 0; ++ config0_mask.bits32 = 0; ++ config0.bits.tx_fc_en = 1; /* enable tx flow control */ ++ config0.bits.rx_fc_en = 1; /* enable rx flow control */ ++ config0_mask.bits.tx_fc_en = 1; ++ config0_mask.bits.rx_fc_en = 1; ++ gmac_write_reg(gmac_base_addr[index] + GMAC_CONFIG0,config0.bits32,config0_mask.bits32); ++// printk("eth%d Flow Control Enable. \n",index); ++ } ++ flow_control_enable[index] = 1; ++ } ++ else ++ { ++ if (flow_control_enable[index] == 1) ++ { ++ config0.bits32 = 0; ++ config0_mask.bits32 = 0; ++ config0.bits.tx_fc_en = 0; /* disable tx flow control */ ++ config0.bits.rx_fc_en = 0; /* disable rx flow control */ ++ config0_mask.bits.tx_fc_en = 1; ++ config0_mask.bits.rx_fc_en = 1; ++ gmac_write_reg(gmac_base_addr[index] + GMAC_CONFIG0,config0.bits32,config0_mask.bits32); ++// printk("eth%d Flow Control Disable. \n",index); ++ } ++ flow_control_enable[index] = 0; ++ } ++ ++ if (pre_phy_status[index] == LINK_DOWN) ++ { ++ gmac_enable_tx_rx(dev); ++ pre_phy_status[index] = LINK_UP; ++ set_bit(__LINK_STATE_START, &dev->state); ++ storlink_ctl.link = 1; ++// printk("eth%d Link Up ...\n",index); ++ } ++ } ++ else ++ { ++ status.bits.link = LINK_DOWN; /* link down */ ++ netif_stop_queue(dev); ++ flow_control_enable[index] = 0; ++ storlink_ctl.link = 0; ++ if (pre_phy_status[index] == LINK_UP) ++ { ++ gmac_disable_tx_rx(dev); ++ pre_phy_status[index] = LINK_DOWN; ++ clear_bit(__LINK_STATE_START, &dev->state); ++// printk("eth%d Link Down ...\n",index); ++ } ++ ++ } ++ ++ reg_val = gmac_read_reg(gmac_base_addr[index] + GMAC_STATUS); ++ if (reg_val != status.bits32) ++ { ++ gmac_write_reg(gmac_base_addr[index] + GMAC_STATUS,status.bits32,0x0000007f); ++ } ++} ++ ++/***************************************/ ++/* define GPIO module base address */ ++/***************************************/ ++#define GPIO_BASE_ADDR (IO_ADDRESS(SL2312_GPIO_BASE)) ++ ++/* define GPIO pin for MDC/MDIO */ ++ ++// for gemini ASIC ++#ifdef CONFIG_SL3516_ASIC ++#define H_MDC_PIN 22 ++#define H_MDIO_PIN 21 ++#define G_MDC_PIN 22 ++#define G_MDIO_PIN 21 ++#else ++#define H_MDC_PIN 3 ++#define H_MDIO_PIN 2 ++#define G_MDC_PIN 0 ++#define G_MDIO_PIN 1 ++#endif ++ ++//#define GPIO_MDC 0x80000000 ++//#define GPIO_MDIO 0x00400000 ++ ++static unsigned int GPIO_MDC = 0; ++static unsigned int GPIO_MDIO = 0; ++static unsigned int GPIO_MDC_PIN = 0; ++static unsigned int GPIO_MDIO_PIN = 0; ++ ++// For PHY test definition!! ++#define LPC_EECK 0x02 ++#define LPC_EDIO 0x04 ++#define LPC_GPIO_SET 3 ++#define LPC_BASE_ADDR IO_ADDRESS(IT8712_IO_BASE) ++#define inb_gpio(x) inb(LPC_BASE_ADDR + IT8712_GPIO_BASE + x) ++#define outb_gpio(x, y) outb(y, LPC_BASE_ADDR + IT8712_GPIO_BASE + x) ++ ++enum GPIO_REG ++{ ++ GPIO_DATA_OUT = 0x00, ++ GPIO_DATA_IN = 0x04, ++ GPIO_PIN_DIR = 0x08, ++ GPIO_BY_PASS = 0x0c, ++ GPIO_DATA_SET = 0x10, ++ GPIO_DATA_CLEAR = 0x14, ++}; ++/***********************/ ++/* MDC : GPIO[31] */ ++/* MDIO: GPIO[22] */ ++/***********************/ ++ ++/*************************************************** ++* All the commands should have the frame structure: ++*

++****************************************************/
++
++/*****************************************************************
++* Inject a bit to NWay register through CSR9_MDC,MDIO
++*******************************************************************/
++void mii_serial_write(char bit_MDO) // write data into mii PHY
++{
++#if 0 //def CONFIG_SL2312_LPC_IT8712
++	unsigned char iomode,status;
++
++	iomode = LPCGetConfig(LDN_GPIO, 0xc8 + LPC_GPIO_SET);
++	iomode |= (LPC_EECK|LPC_EDIO) ;				// Set EECK,EDIO,EECS output
++	LPCSetConfig(LDN_GPIO, 0xc8 + LPC_GPIO_SET, iomode);
++
++	if(bit_MDO)
++	{
++		status = inb_gpio( LPC_GPIO_SET);
++		status |= LPC_EDIO ;		//EDIO high
++		outb_gpio(LPC_GPIO_SET, status);
++	}
++	else
++	{
++		status = inb_gpio( LPC_GPIO_SET);
++		status &= ~(LPC_EDIO) ;		//EDIO low
++		outb_gpio(LPC_GPIO_SET, status);
++	}
++
++	status |= LPC_EECK ;		//EECK high
++	outb_gpio(LPC_GPIO_SET, status);
++
++	status &= ~(LPC_EECK) ;		//EECK low
++	outb_gpio(LPC_GPIO_SET, status);
++
++#else
++    unsigned int addr;
++    unsigned int value;
++
++    addr = GPIO_BASE_ADDR + GPIO_PIN_DIR;
++    value = readl(addr) | GPIO_MDC | GPIO_MDIO; /* set MDC/MDIO Pin to output */
++    writel(value,addr);
++    if(bit_MDO)
++    {
++        addr = (GPIO_BASE_ADDR + GPIO_DATA_SET);
++        writel(GPIO_MDIO,addr); /* set MDIO to 1 */
++        addr = (GPIO_BASE_ADDR + GPIO_DATA_SET);
++        writel(GPIO_MDC,addr); /* set MDC to 1 */
++        addr = (GPIO_BASE_ADDR + GPIO_DATA_CLEAR);
++        writel(GPIO_MDC,addr); /* set MDC to 0 */
++    }
++    else
++    {
++        addr = (GPIO_BASE_ADDR + GPIO_DATA_CLEAR);
++        writel(GPIO_MDIO,addr); /* set MDIO to 0 */
++        addr = (GPIO_BASE_ADDR + GPIO_DATA_SET);
++        writel(GPIO_MDC,addr); /* set MDC to 1 */
++        addr = (GPIO_BASE_ADDR + GPIO_DATA_CLEAR);
++        writel(GPIO_MDC,addr); /* set MDC to 0 */
++    }
++
++#endif
++}
++
++/**********************************************************************
++* read a bit from NWay register through CSR9_MDC,MDIO
++***********************************************************************/
++unsigned int mii_serial_read(void) // read data from mii PHY
++{
++#if 0 //def CONFIG_SL2312_LPC_IT8712
++  	unsigned char iomode,status;
++	unsigned int value ;
++
++	iomode = LPCGetConfig(LDN_GPIO, 0xc8 + LPC_GPIO_SET);
++	iomode &= ~(LPC_EDIO) ;		// Set EDIO input
++	iomode |= (LPC_EECK) ;		// Set EECK,EECS output
++	LPCSetConfig(LDN_GPIO, 0xc8 + LPC_GPIO_SET, iomode);
++
++	status = inb_gpio( LPC_GPIO_SET);
++	status |= LPC_EECK ;		//EECK high
++	outb_gpio(LPC_GPIO_SET, status);
++
++	status &= ~(LPC_EECK) ;		//EECK low
++	outb_gpio(LPC_GPIO_SET, status);
++
++	value = inb_gpio( LPC_GPIO_SET);
++
++	value = value>>2 ;
++	value &= 0x01;
++
++	return value ;
++
++#else
++    unsigned int *addr;
++    unsigned int value;
++
++    addr = (unsigned int *)(GPIO_BASE_ADDR + GPIO_PIN_DIR);
++    value = readl(addr) & ~GPIO_MDIO; //0xffbfffff;   /* set MDC to output and MDIO to input */
++    writel(value,addr);
++
++    addr = (unsigned int *)(GPIO_BASE_ADDR + GPIO_DATA_SET);
++    writel(GPIO_MDC,addr); /* set MDC to 1 */
++    addr = (unsigned int *)(GPIO_BASE_ADDR + GPIO_DATA_CLEAR);
++    writel(GPIO_MDC,addr); /* set MDC to 0 */
++
++    addr = (unsigned int *)(GPIO_BASE_ADDR + GPIO_DATA_IN);
++    value = readl(addr);
++    value = (value & (1<> GPIO_MDIO_PIN;
++    return(value);
++
++#endif
++}
++
++/***************************************
++* preamble + ST
++***************************************/
++void mii_pre_st(void)
++{
++    unsigned char i;
++
++    for(i=0;i<32;i++) // PREAMBLE
++        mii_serial_write(1);
++    mii_serial_write(0); // ST
++    mii_serial_write(1);
++}
++
++
++/******************************************
++* Read MII register
++* phyad -> physical address
++* regad -> register address
++***************************************** */
++unsigned int mii_read(unsigned char phyad,unsigned char regad)
++{
++    unsigned int i,value;
++    unsigned int bit;
++
++    if (phyad == GPHY_ADDR)
++    {
++        GPIO_MDC_PIN = G_MDC_PIN;   /* assigned MDC pin for giga PHY */
++        GPIO_MDIO_PIN = G_MDIO_PIN; /* assigned MDIO pin for giga PHY */
++    }
++    else
++    {
++        GPIO_MDC_PIN = H_MDC_PIN;   /* assigned MDC pin for 10/100 PHY */
++        GPIO_MDIO_PIN = H_MDIO_PIN; /* assigned MDIO pin for 10/100 PHY */
++    }
++    GPIO_MDC = (1<>(4-i)) & 0x01) ? 1 :0 ;
++        mii_serial_write(bit);
++    }
++
++    for (i=0;i<5;i++) { // REGAD
++        bit= ((regad>>(4-i)) & 0x01) ? 1 :0 ;
++        mii_serial_write(bit);
++    }
++
++    mii_serial_read(); // TA_Z
++//    if((bit=mii_serial_read()) !=0 ) // TA_0
++//    {
++//        return(0);
++//    }
++    value=0;
++    for (i=0;i<16;i++) { // READ DATA
++        bit=mii_serial_read();
++        value += (bit<<(15-i)) ;
++    }
++
++    mii_serial_write(0); // dumy clock
++    mii_serial_write(0); // dumy clock
++//printk("%s: phy_addr=%x reg_addr=%x value=%x \n",__func__,phyad,regad,value);
++    return(value);
++}
++
++/******************************************
++* Write MII register
++* phyad -> physical address
++* regad -> register address
++* value -> value to be write
++***************************************** */
++void mii_write(unsigned char phyad,unsigned char regad,unsigned int value)
++{
++    unsigned int i;
++    char bit;
++
++printk("%s: phy_addr=%x reg_addr=%x value=%x \n",__func__,phyad,regad,value);
++    if (phyad == GPHY_ADDR)
++    {
++        GPIO_MDC_PIN = G_MDC_PIN;   /* assigned MDC pin for giga PHY */
++        GPIO_MDIO_PIN = G_MDIO_PIN; /* assigned MDIO pin for giga PHY */
++    }
++    else
++    {
++        GPIO_MDC_PIN = H_MDC_PIN;   /* assigned MDC pin for 10/100 PHY */
++        GPIO_MDIO_PIN = H_MDIO_PIN; /* assigned MDIO pin for 10/100 PHY */
++    }
++    GPIO_MDC = (1<>(4-i)) & 0x01) ? 1 :0 ;
++        mii_serial_write(bit);
++    }
++
++    for (i=0;i<5;i++) { // REGAD
++        bit= ((regad>>(4-i)) & 0x01) ? 1 :0 ;
++        mii_serial_write(bit);
++    }
++    mii_serial_write(1); // TA_1
++    mii_serial_write(0); // TA_0
++
++    for (i=0;i<16;i++) { // OUT DATA
++        bit= ((value>>(15-i)) & 0x01) ? 1 : 0 ;
++        mii_serial_write(bit);
++    }
++    mii_serial_write(0); // dumy clock
++    mii_serial_write(0); // dumy clock
++}
++
++
++
++
++
++
++
++
++
++/*				NOTES
++ *   The instruction set of the 93C66/56/46/26/06 chips are as follows:
++ *
++ *               Start  OP	    *
++ *     Function   Bit  Code  Address**  Data     Description
++ *     -------------------------------------------------------------------
++ *     READ        1    10   A7 - A0             Reads data stored in memory,
++ *                                               starting at specified address
++ *     EWEN        1    00   11XXXXXX            Write enable must precede
++ *                                               all programming modes
++ *     ERASE       1    11   A7 - A0             Erase register A7A6A5A4A3A2A1A0
++ *     WRITE       1    01   A7 - A0   D15 - D0  Writes register
++ *     ERAL        1    00   10XXXXXX            Erase all registers
++ *     WRAL        1    00   01XXXXXX  D15 - D0  Writes to all registers
++ *     EWDS        1    00   00XXXXXX            Disables all programming
++ *                                               instructions
++ *    *Note: A value of X for address is a don't care condition.
++ *    **Note: There are 8 address bits for the 93C56/66 chips unlike
++ *	      the 93C46/26/06 chips which have 6 address bits.
++ *
++ *   The 93Cx6 has a four wire interface: clock, chip select, data in, and
++ *   data out.While the ADM6996 uning three interface: clock, chip select,and data line.
++ *   The input and output are the same pin. ADM6996 can only recognize the write cmd.
++ *   In order to perform above functions, you need
++ *   1. to enable the chip select .
++ *   2. send one clock of dummy clock
++ *   3. send start bit and opcode
++ *   4. send 8 bits address and 16 bits data
++ *   5. to disable the chip select.
++ *							Jason Lee 2003/07/30
++ */
++
++/***************************************/
++/* define GPIO module base address     */
++/***************************************/
++#define GPIO_EECS	     0x00400000		/*   EECS: GPIO[22]   */
++//#define GPIO_MOSI	     0x20000000         /*   EEDO: GPIO[29]   send to 6996*/
++#define GPIO_MISO	     0x40000000         /*   EEDI: GPIO[30]   receive from 6996*/
++#define GPIO_EECK	     0x80000000         /*   EECK: GPIO[31]   */
++
++#define ADM_EECS		0x01
++#define ADM_EECK		0x02
++#define ADM_EDIO		0x04
++/*************************************************************
++* SPI protocol for ADM6996 control
++**************************************************************/
++#define SPI_OP_LEN	     0x03		// the length of start bit and opcode
++#define SPI_OPWRITE	     0X05		// write
++#define SPI_OPREAD	     0X06		// read
++#define SPI_OPERASE	     0X07		// erase
++#define SPI_OPWTEN	     0X04		// write enable
++#define SPI_OPWTDIS	     0X04		// write disable
++#define SPI_OPERSALL	     0X04		// erase all
++#define SPI_OPWTALL	     0X04		// write all
++
++#define SPI_ADD_LEN	     8			// bits of Address
++#define SPI_DAT_LEN	     16			// bits of Data
++#define ADM6996_PORT_NO	     6			// the port number of ADM6996
++#define ADM6999_PORT_NO	     9			// the port number of ADM6999
++#ifdef CONFIG_ADM_6996
++	#define ADM699X_PORT_NO		ADM6996_PORT_NO
++#endif
++#ifdef CONFIG_ADM_6999
++	#define ADM699X_PORT_NO		ADM6999_PORT_NO
++#endif
++#define LPC_GPIO_SET		3
++#define LPC_BASE_ADDR			IO_ADDRESS(IT8712_IO_BASE)
++
++extern int it8712_exist;
++
++#define inb_gpio(x)			inb(LPC_BASE_ADDR + IT8712_GPIO_BASE + x)
++#define outb_gpio(x, y)		outb(y, LPC_BASE_ADDR + IT8712_GPIO_BASE + x)
++
++/****************************************/
++/*	Function Declare		*/
++/****************************************/
++/*
++void SPI_write(unsigned char addr,unsigned int value);
++unsigned int SPI_read(unsigned char table,unsigned char addr);
++void SPI_write_bit(char bit_EEDO);
++unsigned int SPI_read_bit(void);
++void SPI_default(void);
++void SPI_reset(unsigned char rstype,unsigned char port_cnt);
++void SPI_pre_st(void);
++void SPI_CS_enable(unsigned char enable);
++void SPI_Set_VLAN(unsigned char LAN,unsigned int port_mask);
++void SPI_Set_tag(unsigned int port,unsigned tag);
++void SPI_Set_PVID(unsigned int PVID,unsigned int port_mask);
++void SPI_mac_lock(unsigned int port, unsigned char lock);
++void SPI_get_port_state(unsigned int port);
++void SPI_port_enable(unsigned int port,unsigned char enable);
++
++void SPI_get_status(unsigned int port);
++*/
++
++struct PORT_CONFIG
++{
++	unsigned char auto_negotiation;	// 0:Disable	1:Enable
++	unsigned char speed;		// 0:10M	1:100M
++	unsigned char duplex;		// 0:Half	1:Full duplex
++	unsigned char Tag;		// 0:Untag	1:Tag
++	unsigned char port_disable;	// 0:port enable	1:disable
++	unsigned char pvid;		// port VLAN ID 0001
++	unsigned char mdix;		// Crossover judgement. 0:Disable 1:Enable
++	unsigned char mac_lock;		// MAC address Lock 0:Disable 1:Enable
++};
++
++struct PORT_STATUS
++{
++	unsigned char link;		// 0:not link	1:link established
++	unsigned char speed;		// 0:10M	1:100M
++	unsigned char duplex;		// 0:Half	1:Full duplex
++	unsigned char flow_ctl;		// 0:flow control disable 1:enable
++	unsigned char mac_lock;		// MAC address Lock 0:Disable 1:Enable
++	unsigned char port_disable;	// 0:port enable	1:disable
++
++	// Serial Management
++	unsigned long rx_pac_count;		//receive packet count
++	unsigned long rx_pac_byte;		//receive packet byte count
++	unsigned long tx_pac_count;		//transmit packet count
++	unsigned long tx_pac_byte;		//transmit packet byte count
++	unsigned long collision_count;		//error count
++	unsigned long error_count ;
++
++	unsigned long rx_pac_count_overflow;		//overflow flag
++	unsigned long rx_pac_byte_overflow;
++	unsigned long tx_pac_count_overflow;
++	unsigned long tx_pac_byte_overflow;
++	unsigned long collision_count_overflow;
++	unsigned long error_count_overflow;
++};
++
++struct PORT_CONFIG port_config[ADM699X_PORT_NO];	// 0~3:LAN , 4:WAN , 5:MII
++static struct PORT_STATUS port_state[ADM699X_PORT_NO];
++
++/******************************************
++* SPI_write
++* addr -> Write Address
++* value -> value to be write
++***************************************** */
++void SPI_write(unsigned char addr,unsigned int value)
++{
++	int     i;
++	char    bit;
++#ifdef CONFIG_IT8712_GPIO
++	char    status;
++#else
++    int     ad1;
++#endif
++
++#ifdef CONFIG_IT8712_GPIO
++	status = inb_gpio(LPC_GPIO_SET);
++	status &= ~(ADM_EDIO) ;		//EDIO low
++	outb_gpio(LPC_GPIO_SET, status);
++#else
++   	ad1 = (GPIO_BASE_ADDR + GPIO_DATA_CLEAR);
++	writel(GPIO_MISO,ad1); /* set MISO to 0 */
++#endif
++	SPI_CS_enable(1);
++
++	SPI_write_bit(0);       //dummy clock
++
++	//send write command (0x05)
++	for(i=SPI_OP_LEN-1;i>=0;i--)
++	{
++		bit = (SPI_OPWRITE>>i)& 0x01;
++		SPI_write_bit(bit);
++	}
++	// send 8 bits address (MSB first, LSB last)
++	for(i=SPI_ADD_LEN-1;i>=0;i--)
++	{
++		bit = (addr>>i)& 0x01;
++		SPI_write_bit(bit);
++	}
++	// send 16 bits data (MSB first, LSB last)
++	for(i=SPI_DAT_LEN-1;i>=0;i--)
++	{
++		bit = (value>>i)& 0x01;
++		SPI_write_bit(bit);
++	}
++
++	SPI_CS_enable(0);	// CS low
++
++	for(i=0;i<0xFFF;i++) ;
++#ifdef CONFIG_IT8712_GPIO
++	status = inb_gpio(LPC_GPIO_SET);
++	status &= ~(ADM_EDIO) ;		//EDIO low
++	outb_gpio(LPC_GPIO_SET, status);
++#else
++   	ad1 = (GPIO_BASE_ADDR + GPIO_DATA_CLEAR);
++	writel(GPIO_MISO,ad1); /* set MISO to 0 */
++#endif
++}
++
++
++/************************************
++* SPI_write_bit
++* bit_EEDO -> 1 or 0 to be written
++************************************/
++void SPI_write_bit(char bit_EEDO)
++{
++#ifdef CONFIG_IT8712_GPIO
++	unsigned char iomode,status;
++
++	iomode = LPCGetConfig(LDN_GPIO, 0xc8 + LPC_GPIO_SET);
++	iomode |= (ADM_EECK|ADM_EDIO|ADM_EECS) ;				// Set EECK,EDIO,EECS output
++	LPCSetConfig(LDN_GPIO, 0xc8 + LPC_GPIO_SET, iomode);
++
++	if(bit_EEDO)
++	{
++		status = inb_gpio( LPC_GPIO_SET);
++		status |= ADM_EDIO ;		//EDIO high
++		outb_gpio(LPC_GPIO_SET, status);
++	}
++	else
++	{
++		status = inb_gpio( LPC_GPIO_SET);
++		status &= ~(ADM_EDIO) ;		//EDIO low
++		outb_gpio(LPC_GPIO_SET, status);
++	}
++
++	status |= ADM_EECK ;		//EECK high
++	outb_gpio(LPC_GPIO_SET, status);
++
++	status &= ~(ADM_EECK) ;		//EECK low
++	outb_gpio(LPC_GPIO_SET, status);
++
++#else
++	unsigned int addr;
++	unsigned int value;
++
++	addr = (GPIO_BASE_ADDR + GPIO_PIN_DIR);
++	value = readl(addr) |GPIO_EECK |GPIO_MISO ;   /* set EECK/MISO Pin to output */
++	writel(value,addr);
++	if(bit_EEDO)
++	{
++		addr = (GPIO_BASE_ADDR + GPIO_DATA_SET);
++		writel(GPIO_MISO,addr); /* set MISO to 1 */
++		writel(GPIO_EECK,addr); /* set EECK to 1 */
++		addr = (GPIO_BASE_ADDR + GPIO_DATA_CLEAR);
++		writel(GPIO_EECK,addr); /* set EECK to 0 */
++	}
++	else
++	{
++		addr = (GPIO_BASE_ADDR + GPIO_DATA_CLEAR);
++		writel(GPIO_MISO,addr); /* set MISO to 0 */
++		addr = (GPIO_BASE_ADDR + GPIO_DATA_SET);
++		writel(GPIO_EECK,addr); /* set EECK to 1 */
++		addr = (GPIO_BASE_ADDR + GPIO_DATA_CLEAR);
++		writel(GPIO_EECK,addr); /* set EECK to 0 */
++	}
++
++	return ;
++#endif
++}
++
++/**********************************************************************
++* read a bit from ADM6996 register
++***********************************************************************/
++unsigned int SPI_read_bit(void) // read data from
++{
++#ifdef CONFIG_IT8712_GPIO
++	unsigned char iomode,status;
++	unsigned int value ;
++
++	iomode = LPCGetConfig(LDN_GPIO, 0xc8 + LPC_GPIO_SET);
++	iomode &= ~(ADM_EDIO) ;		// Set EDIO input
++	iomode |= (ADM_EECS|ADM_EECK) ;		// Set EECK,EECS output
++	LPCSetConfig(LDN_GPIO, 0xc8 + LPC_GPIO_SET, iomode);
++
++	status = inb_gpio( LPC_GPIO_SET);
++	status |= ADM_EECK ;		//EECK high
++	outb_gpio(LPC_GPIO_SET, status);
++
++	status &= ~(ADM_EECK) ;		//EECK low
++	outb_gpio(LPC_GPIO_SET, status);
++
++	value = inb_gpio( LPC_GPIO_SET);
++
++	value = value>>2 ;
++	value &= 0x01;
++
++	return value ;
++#else
++	unsigned int addr;
++	unsigned int value;
++
++	addr = (GPIO_BASE_ADDR + GPIO_PIN_DIR);
++	value = readl(addr) & (~GPIO_MISO);   // set EECK to output and MISO to input
++	writel(value,addr);
++
++	addr =(GPIO_BASE_ADDR + GPIO_DATA_SET);
++	writel(GPIO_EECK,addr); // set EECK to 1
++	addr = (GPIO_BASE_ADDR + GPIO_DATA_CLEAR);
++	writel(GPIO_EECK,addr); // set EECK to 0
++
++	addr = (GPIO_BASE_ADDR + GPIO_DATA_IN);
++	value = readl(addr) ;
++	value = value >> 30;
++	return value ;
++#endif
++}
++
++/******************************************
++* SPI_default
++* EEPROM content default value
++*******************************************/
++void SPI_default(void)
++{
++	int i;
++#ifdef CONFIG_ADM_6999
++	SPI_write(0x11,0xFF30);
++	for(i=1;i<8;i++)
++		SPI_write(i,0x840F);
++
++	SPI_write(0x08,0x880F);			//port 8 Untag, PVID=2
++	SPI_write(0x09,0x881D);			//port 9 Tag, PVID=2 ,10M
++	SPI_write(0x14,0x017F);			//Group 0~6,8 as VLAN 1
++	SPI_write(0x15,0x0180);			//Group 7,8 as VLAN 2
++#endif
++
++#ifdef CONFIG_ADM_6996
++	SPI_write(0x11,0xFF30);
++	SPI_write(0x01,0x840F);			//port 0~3 Untag ,PVID=1 ,100M ,duplex
++	SPI_write(0x03,0x840F);
++	SPI_write(0x05,0x840F);
++	SPI_write(0x07,0x840F);
++	SPI_write(0x08,0x880F);			//port 4 Untag, PVID=2
++	SPI_write(0x09,0x881D);			//port 5 Tag, PVID=2 ,10M
++	SPI_write(0x14,0x0155);			//Group 0~3,5 as VLAN 1
++	SPI_write(0x15,0x0180);			//Group 4,5 as VLAN 2
++
++#endif
++
++	for(i=0x16;i<=0x22;i++)
++		SPI_write((unsigned char)i,0x0000);		// clean VLAN¡@map 3~15
++
++	for (i=0;i reset type
++*	    0:reset all count for 'port_cnt' port
++*	    1:reset specified count 'port_cnt'
++* port_cnt   ->  port number or counter index
++***************************************************/
++void SPI_reset(unsigned char rstype,unsigned char port_cnt)
++{
++
++	int i;
++#ifdef CONFIG_IT8712_GPIO
++    char status;
++#else
++	int ad1;
++#endif
++	char bit;
++
++#ifdef CONFIG_IT8712_GPIO
++	status = inb_gpio(LPC_GPIO_SET);
++	status &= ~(ADM_EDIO) ;		//EDIO low
++	outb_gpio(LPC_GPIO_SET, status);
++#else
++   	ad1 = (GPIO_BASE_ADDR + GPIO_DATA_CLEAR);
++	writel(GPIO_MISO,ad1); /* set MISO to 0 */
++#endif
++
++	SPI_CS_enable(0);	// CS low
++
++	SPI_pre_st(); // PRE+ST
++	SPI_write_bit(0); // OP
++	SPI_write_bit(1);
++
++	SPI_write_bit(1);		// Table select, must be 1 -> reset Counter
++
++	SPI_write_bit(0);		// Device Address
++	SPI_write_bit(0);
++
++	rstype &= 0x01;
++	SPI_write_bit(rstype);		// Reset type 0:clear dedicate port's all counters 1:clear dedicate counter
++
++	for (i=5;i>=0;i--) 		// port or cnt index
++	{
++		bit = port_cnt >> i ;
++		bit &= 0x01 ;
++		SPI_write_bit(bit);
++	}
++
++	SPI_write_bit(0); 		// dumy clock
++	SPI_write_bit(0); 		// dumy clock
++
++#ifdef CONFIG_IT8712_GPIO
++	status = inb_gpio(LPC_GPIO_SET);
++	status &= ~(ADM_EDIO) ;		//EDIO low
++	outb_gpio(LPC_GPIO_SET, status);
++#else
++   	ad1 = (GPIO_BASE_ADDR + GPIO_DATA_CLEAR);
++	writel(GPIO_MISO,ad1); /* set MISO to 0 */
++#endif
++}
++
++/*****************************************************
++* SPI_pre_st
++* preambler: 32 bits '1'   start bit: '01'
++*****************************************************/
++void SPI_pre_st(void)
++{
++	int i;
++
++	for(i=0;i<32;i++) // PREAMBLE
++		SPI_write_bit(1);
++	SPI_write_bit(0); // ST
++	SPI_write_bit(1);
++}
++
++
++/***********************************************************
++* SPI_CS_enable
++* before access ,you have to enable Chip Select. (pull high)
++* When fisish, you should pull low !!
++*************************************************************/
++void SPI_CS_enable(unsigned char enable)
++{
++#ifdef CONFIG_IT8712_GPIO
++
++	unsigned char iomode,status;
++
++	iomode = LPCGetConfig(LDN_GPIO, 0xc8 + LPC_GPIO_SET);
++	iomode |= (ADM_EECK|ADM_EDIO|ADM_EECS) ;				// Set EECK,EDIO,EECS output
++	LPCSetConfig(LDN_GPIO, 0xc8 + LPC_GPIO_SET, iomode);
++
++
++	status = inb_gpio( LPC_GPIO_SET);
++	if(enable)
++		status |= ADM_EECS ;		//EECS high
++	else
++		status &= ~(ADM_EECS) ;	//EECS low
++
++	outb_gpio(LPC_GPIO_SET, status);
++
++
++	status |= ADM_EECK ;		//EECK high
++	outb_gpio(LPC_GPIO_SET, status);
++
++	status &= ~(ADM_EECK) ;		//EECK low
++	outb_gpio(LPC_GPIO_SET, status);
++
++#else
++	unsigned int addr,value;
++
++	addr = (GPIO_BASE_ADDR + GPIO_PIN_DIR);
++	value = readl(addr) |GPIO_EECS |GPIO_EECK;   /* set EECS/EECK Pin to output */
++	writel(value,addr);
++
++	if(enable)
++	{
++		addr = (GPIO_BASE_ADDR + GPIO_DATA_SET);
++		writel(GPIO_EECS,addr); /* set EECS to 1 */
++
++	}
++	else
++	{
++		addr = (GPIO_BASE_ADDR + GPIO_DATA_CLEAR);
++		writel(GPIO_EECS,addr); /* set EECS to 0 */
++		addr = (GPIO_BASE_ADDR + GPIO_DATA_SET);
++		writel(GPIO_EECK,addr); /* set EECK to 1 */	// at least one clock after CS low
++		addr = (GPIO_BASE_ADDR + GPIO_DATA_CLEAR);
++		writel(GPIO_EECK,addr); /* set EECK to 0 */
++	}
++#endif
++}
++
++/*********************************************************
++* SPI_Set_VLAN: group ports as VLAN
++* LAN  -> VLAN number : 0~16
++* port_mask -> ports which would group as LAN
++* 	       ex. 0x03 = 0000 0011
++*			port 0 and port 1
++*********************************************************/
++void SPI_Set_VLAN(unsigned char LAN,unsigned int port_mask)
++{
++	unsigned int i,value=0;
++	unsigned reg_add = 0x13 + LAN ;
++
++	for(i=0;i>= 1;
++	}
++
++	SPI_write(reg_add,value);
++}
++
++
++/*******************************************
++* SPI_Set_tag
++* port -> port number to set tag or untag
++* tag  -> 0/set untag,  1/set tag
++* In general, tag is for MII port. LAN and
++* WAN port is configed as untag!!
++********************************************/
++void SPI_Set_tag(unsigned int port,unsigned tag)
++{
++	unsigned int regadd,value;
++
++	// mapping port's register !! (0,1,2,3,4,5) ==> (1,3,5,7,8,9)
++	if(port<=3)
++		regadd=2*port+1;
++	else if(port==4) regadd = 8 ;
++	else regadd = 9 ;
++
++
++	value = SPI_read(0,regadd);		//read original setting
++
++	if(tag)
++		value |= 0x0010 ;		// set tag
++	else
++		value &= 0xFFEF ;		// set untag
++
++	SPI_write(regadd,value);		// write back!!
++}
++
++/************************************************
++* SPI_Set_PVID
++* PVID -> PVID number :
++* port_mask -> ports which would group as LAN
++* 	       ex. 0x0F = 0000 1111 ==> port 0~3
++************************************************/
++void SPI_Set_PVID(unsigned int PVID,unsigned int port_mask)
++{
++	unsigned int i,value=0;
++
++	PVID &= 0x000F ;
++
++	for(i=0;i>= 1;
++	}
++}
++
++
++/************************************************
++* SPI_get_PVID
++* port -> which ports to VID
++************************************************/
++unsigned int SPI_Get_PVID(unsigned int port)
++{
++	unsigned int value=0;
++
++	if (port>=ADM6996_PORT_NO)
++		return 0;
++
++	switch(port)
++	{
++		case 0:
++			value = SPI_read(0,0x01);	// read original value
++			value &= 0x3C00 ;		// get VID
++			value = value >> 10 ;		// Shift
++			break;
++		case 1:
++			value = SPI_read(0,0x03);
++			value &= 0x3C00 ;
++			value = value >> 10 ;
++			break;
++		case 2:
++			value = SPI_read(0,0x05);
++			value &= 0x3C00 ;
++			value = value >> 10 ;
++			break;
++		case 3:
++			value = SPI_read(0,0x07);
++			value &= 0x3C00 ;
++			value = value >> 10 ;
++			break;
++		case 4:
++			value = SPI_read(0,0x08);
++			value &= 0x3C00 ;
++			value = value >> 10 ;
++			break;
++		case 5:
++			value = SPI_read(0,0x09);
++			value &= 0x3C00 ;
++			value = value >> 10 ;
++			break;
++	}
++	return value ;
++}
++
++
++/**********************************************
++* SPI_mac_clone
++* port -> the port which will lock or unlock
++* lock -> 0/the port will be unlock
++*	  1/the port will be locked
++**********************************************/
++void SPI_mac_lock(unsigned int port, unsigned char lock)
++{
++	unsigned int i,value=0;
++
++	value = SPI_read(0,0x12);		// read original
++
++	for(i=0;i 0: if DA == pause then drop and stop mac learning
++*	     1: if DA == pause ,then forward it
++***************************************************/
++void SPI_pause_cmd_forward(unsigned char forward)
++{
++	unsigned int value=0;
++
++	value = SPI_read(0,0x2C);		// read original setting
++	if(forward)
++		value |= 0x2000;		// set bit[13] '1'
++	else
++		value &= 0xDFFF;		// set bit[13] '0'
++
++	SPI_write(0x2C,value);
++
++}
++
++
++/************************************************
++* SPI_read
++* table -> which table to be read: 1/count  0/EEPROM
++* addr  -> Address to be read
++* return : Value of the register
++*************************************************/
++unsigned int SPI_read(unsigned char table,unsigned char addr)
++{
++	int i ;
++	unsigned int value=0;
++	unsigned int bit;
++#ifdef CONFIG_IT8712_GPIO
++	unsigned char status;
++#else
++    unsigned int ad1;
++#endif
++
++#ifdef CONFIG_IT8712_GPIO
++	status = inb_gpio(LPC_GPIO_SET);
++	status &= ~(ADM_EDIO) ;		//EDIO low
++	outb_gpio(LPC_GPIO_SET, status);
++#else
++   	ad1 = (GPIO_BASE_ADDR + GPIO_DATA_CLEAR);
++	writel(GPIO_MISO,ad1); /* set MISO to 0 */
++#endif
++
++	SPI_CS_enable(0);
++
++	SPI_pre_st(); // PRE+ST
++	SPI_write_bit(1); // OPCODE '10' for read
++	SPI_write_bit(0);
++
++	(table==1) ? SPI_write_bit(1) : SPI_write_bit(0) ;	// table select
++
++	SPI_write_bit(0);		// Device Address
++	SPI_write_bit(0);
++
++
++	// send 7 bits address to be read
++	for (i=6;i>=0;i--) {
++		bit= ((addr>>i) & 0x01) ? 1 :0 ;
++		SPI_write_bit(bit);
++	}
++
++
++	// turn around
++	SPI_read_bit(); // TA_Z
++
++	value=0;
++	for (i=31;i>=0;i--) { // READ DATA
++		bit=SPI_read_bit();
++		value |= bit << i ;
++	}
++
++	SPI_read_bit(); // dumy clock
++	SPI_read_bit(); // dumy clock
++
++	if(!table)					// EEPROM, only fetch 16 bits data
++	{
++	    if(addr&0x01)				// odd number content (register,register-1)
++		    value >>= 16 ;			// so we remove the rear 16bits
++	    else					// even number content (register+1,register),
++		    value &= 0x0000FFFF ;		// so we keep the rear 16 bits
++	}
++
++
++	SPI_CS_enable(0);
++
++#ifdef CONFIG_IT8712_GPIO
++	status = inb_gpio(LPC_GPIO_SET);
++	status &= ~(ADM_EDIO) ;		//EDIO low
++	outb_gpio(LPC_GPIO_SET, status);
++#else
++   	ad1 = (GPIO_BASE_ADDR + GPIO_DATA_CLEAR);
++	writel(GPIO_MISO,ad1); /* set MISO to 0 */
++#endif
++
++	return(value);
++
++}
++
++
++
++/**************************************************
++* SPI_port_en
++* port -> Number of port to config
++* enable -> 1/ enable this port
++*	    0/ disable this port
++**************************************************/
++void SPI_port_enable(unsigned int port,unsigned char enable)
++{
++	unsigned int reg_val ;
++	unsigned char reg_add ;
++
++	if(port<=3)
++		reg_add=2*port+1;
++	else if(port==4) reg_add = 8 ;
++	else reg_add = 9 ;
++
++	reg_val = SPI_read(0,reg_add);
++	if(enable)
++	{
++		reg_val &= 0xFFDF ;
++		SPI_write(reg_add,reg_val);
++	}
++	else
++	{
++		reg_val |= 0x0020 ;
++		SPI_write(reg_add,reg_val);
++	}
++}
++
++/********************************************************
++* get port status
++* port -> specify the port number to get configuration
++*********************************************************/
++void SPI_get_status(unsigned int port)
++{
++/*	unsigned int reg_val,add_offset[6];
++	struct PORT_STATUS *status;
++	status = &port_state[port];
++
++	if(port>(ADM6996_PORT_NO-1))
++		return ;
++
++	// Link estabilish , speed, deplex, flow control ?
++	if(port < 5 )
++	{
++		reg_val = SPI_read(1, 1) ;
++		if(port < 4)
++			reg_val >>= port*8 ;
++		else
++			reg_val >>=28 ;
++		status->link = reg_val & 0x00000001 ;
++		status->speed = reg_val  & 0x00000002 ;
++		status->duplex = reg_val & 0x00000004 ;
++		status->flow_ctl = reg_val & 0x00000008 ;
++	}
++	else if(port ==5 )
++	{
++		reg_val = SPI_read(1, 2) ;
++		status->link = reg_val & 0x00000001 ;
++		status->speed = reg_val  & 0x00000002 ;
++		status->duplex = reg_val & 0x00000008 ;
++		status->flow_ctl = reg_val & 0x00000010 ;
++	}
++
++	//   Mac Lock ?
++	reg_val = SPI_read(0,0x12);
++	switch(port)
++	{
++		case 0:	status->mac_lock = reg_val & 0x00000001;
++		case 1:	status->mac_lock = reg_val & 0x00000004;
++		case 2:	status->mac_lock = reg_val & 0x00000010;
++		case 3:	status->mac_lock = reg_val & 0x00000040;
++		case 4:	status->mac_lock = reg_val & 0x00000080;
++		case 5:	status->mac_lock = reg_val & 0x00000100;
++	}
++
++	// port enable ?
++	add_offset[0] = 0x01 ;		add_offset[1] = 0x03 ;
++	add_offset[2] = 0x05 ;		add_offset[3] = 0x07 ;
++	add_offset[4] = 0x08 ;		add_offset[5] = 0x09 ;
++	reg_val = SPI_read(0,add_offset[port]);
++	status->port_disable = reg_val & 0x0020;
++
++
++	//  Packet Count ...
++	add_offset[0] = 0x04 ;		add_offset[1] = 0x06 ;
++	add_offset[2] = 0x08 ;		add_offset[3] = 0x0a ;
++	add_offset[4] = 0x0b ;		add_offset[5] = 0x0c ;
++
++	reg_val = SPI_read(1,add_offset[port]);
++	status->rx_pac_count = reg_val ;
++	reg_val = SPI_read(1,add_offset[port]+9);
++	status->rx_pac_byte = reg_val ;
++	reg_val = SPI_read(1,add_offset[port]+18);
++	status->tx_pac_count = reg_val ;
++	reg_val = SPI_read(1,add_offset[port]+27);
++	status->tx_pac_byte = reg_val ;
++	reg_val = SPI_read(1,add_offset[port]+36);
++	status->collision_count = reg_val ;
++	reg_val = SPI_read(1,add_offset[port]+45);
++	status->error_count = reg_val ;
++	reg_val = SPI_read(1, 0x3A);
++	switch(port)
++	{
++		case 0:	status->rx_pac_count_overflow = reg_val & 0x00000001;
++			status->rx_pac_byte_overflow = reg_val & 0x00000200 ;
++		case 1:	status->rx_pac_count_overflow = reg_val & 0x00000004;
++			status->rx_pac_byte_overflow = reg_val & 0x00000800 ;
++		case 2:	status->rx_pac_count_overflow = reg_val & 0x00000010;
++			status->rx_pac_byte_overflow = reg_val & 0x00002000 ;
++		case 3:	status->rx_pac_count_overflow = reg_val & 0x00000040;;
++			status->rx_pac_byte_overflow = reg_val & 0x00008000 ;
++		case 4:	status->rx_pac_count_overflow = reg_val & 0x00000080;
++			status->rx_pac_byte_overflow = reg_val & 0x00010000 ;
++		case 5:	status->rx_pac_count_overflow = reg_val & 0x00000100;
++			status->rx_pac_byte_overflow = reg_val & 0x00020000 ;
++	}
++
++	reg_val = SPI_read(1, 0x3B);
++	switch(port)
++	{
++		case 0:	status->tx_pac_count_overflow = reg_val & 0x00000001;
++			status->tx_pac_byte_overflow  = reg_val & 0x00000200 ;
++		case 1:	status->tx_pac_count_overflow  = reg_val & 0x00000004;
++			status->tx_pac_byte_overflow  = reg_val & 0x00000800 ;
++		case 2:	status->tx_pac_count_overflow  = reg_val & 0x00000010;
++			status->tx_pac_byte_overflow  = reg_val & 0x00002000 ;
++		case 3:	status->tx_pac_count_overflow  = reg_val & 0x00000040;;
++			status->tx_pac_byte_overflow  = reg_val & 0x00008000 ;
++		case 4:	status->tx_pac_count_overflow  = reg_val & 0x00000080;
++			status->tx_pac_byte_overflow  = reg_val & 0x00010000 ;
++		case 5:	status->tx_pac_count_overflow  = reg_val & 0x00000100;
++			status->tx_pac_byte_overflow  = reg_val & 0x00020000 ;
++	}
++*/
++
++	unsigned int reg_val;
++	struct PORT_STATUS *status;
++	status = &port_state[port];
++
++	if(port>=ADM6999_PORT_NO)
++		return ;
++
++	// Link estabilish , speed, deplex, flow control ?
++	if(port < ADM6999_PORT_NO-1 )
++	{
++		reg_val = SPI_read(1, 0x01) ;
++		reg_val = reg_val >> port*4 ;
++		status->link = reg_val & 0x00000001 ;
++		status->speed = reg_val  & 0x00000002 ;
++		status->duplex = reg_val & 0x00000004 ;
++		status->flow_ctl = reg_val & 0x00000008 ;
++	}
++	else if(port == (ADM6999_PORT_NO-1) )
++	{
++		reg_val = SPI_read(1, 0x02) ;
++		status->link = reg_val & 0x00000001 ;
++		status->speed = reg_val  & 0x00000002 ;
++		status->duplex = reg_val & 0x00000008 ;
++		status->flow_ctl = reg_val & 0x00000010 ;
++	}
++
++	// Mac Lock ?
++	reg_val = SPI_read(0,0x12);
++	reg_val = reg_val >> port ;
++	reg_val = reg_val & 0x01 ;
++	status->mac_lock = reg_val ? 0x01:0x00 ;
++
++	// port enable ?
++	reg_val = SPI_read(0,(unsigned char)port+1);
++	status->port_disable = reg_val & 0x0020;
++
++	//  Packet Count ...
++	reg_val = SPI_read(1,(unsigned char)port+0x04);
++	status->rx_pac_count = reg_val ;
++	reg_val = SPI_read(1,(unsigned char)port+0x0D);
++	status->rx_pac_byte = reg_val ;
++	reg_val = SPI_read(1,(unsigned char)port+0x16);
++	status->tx_pac_count = reg_val ;
++	reg_val = SPI_read(1,(unsigned char)port+0x1F);
++	status->tx_pac_byte = reg_val ;
++	reg_val = SPI_read(1,(unsigned char)port+0x28);
++	status->collision_count = reg_val ;
++	reg_val = SPI_read(1,(unsigned char)port+0x31);
++	status->error_count = reg_val ;
++	reg_val = SPI_read(1, 0x3A);
++	reg_val = reg_val >> port ;
++	status->rx_pac_count_overflow = reg_val & 0x00000001;
++	reg_val = reg_val >> 0x09 ;
++	status->rx_pac_byte_overflow = reg_val & 0x00000001 ;
++
++	reg_val = SPI_read(1, 0x3B);
++	reg_val = reg_val >> port ;
++	status->tx_pac_count_overflow = reg_val & 0x00000001;
++	reg_val = reg_val >> 0x09 ;
++	status->tx_pac_byte_overflow  = reg_val & 0x00000001 ;
++
++	reg_val = SPI_read(1, 0x3C);
++	reg_val = reg_val >> port ;
++	status->collision_count_overflow = reg_val & 0x00000001;
++	reg_val = reg_val >> 0x09 ;
++	status->error_count_overflow  = reg_val & 0x00000001 ;
++
++}
++
++unsigned int SPI_get_identifier(void)
++{
++	unsigned int flag=0;
++
++#ifdef CONFIG_IT8712_GPIO
++
++	if (!it8712_exist) {
++		return -ENODEV;
++	}
++	printk("it8712_gpio init\n");
++
++	/* initialize registers */
++	// switch all multi-function pins to GPIO
++	LPCSetConfig(LDN_GPIO, 0x28, 0xff);
++
++	// set simple I/O base address
++	LPCSetConfig(LDN_GPIO, 0x62, IT8712_GPIO_BASE >> 8);
++	LPCSetConfig(LDN_GPIO, 0x63, (unsigned char) IT8712_GPIO_BASE >> 8);
++
++	// select GPIO to simple I/O
++	LPCSetConfig(LDN_GPIO, 0xc3, 0xff);
++
++	// enable internal pull-up
++	LPCSetConfig(LDN_GPIO, 0xbb, 0xff);
++
++#endif
++
++	flag = SPI_read(1,0x00);
++	printk("Get ADM identifier %6x\n",flag);
++	if ((flag & 0xFFFF0) == 0x21120) {
++		printk("ADM699X Found\n");
++		return 1;
++	}
++	else {
++		printk("ADM699X not Found\n");
++		return 0;
++	}
++}
++
+--- /dev/null
++++ b/drivers/net/sl351x_crc16.c
+@@ -0,0 +1,93 @@
++/****************************************************************************
++* Name			: sl351x_crc16.c
++* Description	:
++*		Implement CRC16
++*		refer to RFC1662
++* History
++*
++*	Date		Writer		Description
++*	-----------	-----------	-------------------------------------------------
++*	09/14/2005	Gary Chen	Create
++*
++****************************************************************************/
++
++#define INITFCS16		0xffff  /* Initial FCS value */
++#define GOODFCS16		0xf0b8  /* Good final FCS value */
++#define SWAP_WORD(x)	(unsigned short)((((unsigned short)x & 0x00FF) << 8) |	\
++										 (((unsigned short)x & 0xFF00) >> 8))
++
++/*----------------------------------------------------------------------
++* 	x**0 + x**5 + x**12 + x**16
++*----------------------------------------------------------------------*/
++static const unsigned short crc16_tbl[256] = {
++      0x0000, 0x1189, 0x2312, 0x329b, 0x4624, 0x57ad, 0x6536, 0x74bf,
++      0x8c48, 0x9dc1, 0xaf5a, 0xbed3, 0xca6c, 0xdbe5, 0xe97e, 0xf8f7,
++      0x1081, 0x0108, 0x3393, 0x221a, 0x56a5, 0x472c, 0x75b7, 0x643e,
++      0x9cc9, 0x8d40, 0xbfdb, 0xae52, 0xdaed, 0xcb64, 0xf9ff, 0xe876,
++      0x2102, 0x308b, 0x0210, 0x1399, 0x6726, 0x76af, 0x4434, 0x55bd,
++      0xad4a, 0xbcc3, 0x8e58, 0x9fd1, 0xeb6e, 0xfae7, 0xc87c, 0xd9f5,
++      0x3183, 0x200a, 0x1291, 0x0318, 0x77a7, 0x662e, 0x54b5, 0x453c,
++      0xbdcb, 0xac42, 0x9ed9, 0x8f50, 0xfbef, 0xea66, 0xd8fd, 0xc974,
++      0x4204, 0x538d, 0x6116, 0x709f, 0x0420, 0x15a9, 0x2732, 0x36bb,
++      0xce4c, 0xdfc5, 0xed5e, 0xfcd7, 0x8868, 0x99e1, 0xab7a, 0xbaf3,
++      0x5285, 0x430c, 0x7197, 0x601e, 0x14a1, 0x0528, 0x37b3, 0x263a,
++      0xdecd, 0xcf44, 0xfddf, 0xec56, 0x98e9, 0x8960, 0xbbfb, 0xaa72,
++      0x6306, 0x728f, 0x4014, 0x519d, 0x2522, 0x34ab, 0x0630, 0x17b9,
++      0xef4e, 0xfec7, 0xcc5c, 0xddd5, 0xa96a, 0xb8e3, 0x8a78, 0x9bf1,
++      0x7387, 0x620e, 0x5095, 0x411c, 0x35a3, 0x242a, 0x16b1, 0x0738,
++      0xffcf, 0xee46, 0xdcdd, 0xcd54, 0xb9eb, 0xa862, 0x9af9, 0x8b70,
++      0x8408, 0x9581, 0xa71a, 0xb693, 0xc22c, 0xd3a5, 0xe13e, 0xf0b7,
++      0x0840, 0x19c9, 0x2b52, 0x3adb, 0x4e64, 0x5fed, 0x6d76, 0x7cff,
++      0x9489, 0x8500, 0xb79b, 0xa612, 0xd2ad, 0xc324, 0xf1bf, 0xe036,
++      0x18c1, 0x0948, 0x3bd3, 0x2a5a, 0x5ee5, 0x4f6c, 0x7df7, 0x6c7e,
++      0xa50a, 0xb483, 0x8618, 0x9791, 0xe32e, 0xf2a7, 0xc03c, 0xd1b5,
++      0x2942, 0x38cb, 0x0a50, 0x1bd9, 0x6f66, 0x7eef, 0x4c74, 0x5dfd,
++      0xb58b, 0xa402, 0x9699, 0x8710, 0xf3af, 0xe226, 0xd0bd, 0xc134,
++      0x39c3, 0x284a, 0x1ad1, 0x0b58, 0x7fe7, 0x6e6e, 0x5cf5, 0x4d7c,
++      0xc60c, 0xd785, 0xe51e, 0xf497, 0x8028, 0x91a1, 0xa33a, 0xb2b3,
++      0x4a44, 0x5bcd, 0x6956, 0x78df, 0x0c60, 0x1de9, 0x2f72, 0x3efb,
++      0xd68d, 0xc704, 0xf59f, 0xe416, 0x90a9, 0x8120, 0xb3bb, 0xa232,
++      0x5ac5, 0x4b4c, 0x79d7, 0x685e, 0x1ce1, 0x0d68, 0x3ff3, 0x2e7a,
++      0xe70e, 0xf687, 0xc41c, 0xd595, 0xa12a, 0xb0a3, 0x8238, 0x93b1,
++      0x6b46, 0x7acf, 0x4854, 0x59dd, 0x2d62, 0x3ceb, 0x0e70, 0x1ff9,
++      0xf78f, 0xe606, 0xd49d, 0xc514, 0xb1ab, 0xa022, 0x92b9, 0x8330,
++      0x7bc7, 0x6a4e, 0x58d5, 0x495c, 0x3de3, 0x2c6a, 0x1ef1, 0x0f78
++};
++
++/*----------------------------------------------------------------------
++* hash_crc16
++*----------------------------------------------------------------------*/
++unsigned short hash_crc16(unsigned short crc, unsigned char *datap, unsigned long len)
++{
++    while (len--)
++    {
++        crc = (crc >> 8) ^ crc16_tbl[(crc ^ (*datap++)) & 0xff];
++    }
++
++    return (crc);
++
++}
++
++/*----------------------------------------------------------------------
++* hash_check_crc16
++*----------------------------------------------------------------------*/
++unsigned long hash_check_crc16(unsigned char *datap, unsigned long len)
++{
++    unsigned short crc;
++
++    crc = hash_crc16(INITFCS16, datap, len );
++    return (crc == GOODFCS16) ?  0 : 1;
++}
++
++/*----------------------------------------------------------------------
++* hash_gen_crc16
++*----------------------------------------------------------------------*/
++unsigned short hash_gen_crc16(unsigned char *datap, unsigned long len)
++{
++    unsigned short crc;
++
++    crc = hash_crc16(INITFCS16, datap, len);
++    crc ^= 0xffff;
++
++    return(SWAP_WORD(crc));
++}
+--- /dev/null
++++ b/drivers/net/sl351x_gmac.c
+@@ -0,0 +1,5622 @@
++/**************************************************************************
++* Copyright 2006 StorLink Semiconductors, Inc.  All rights reserved.
++*--------------------------------------------------------------------------
++* Name			: sl351x_gmac.c
++* Description	:
++*		Ethernet device driver for Storlink SL351x FPGA
++*
++* History
++*
++*	Date		Writer		Description
++*	-----------	-----------	-------------------------------------------------
++*	08/22/2005	Gary Chen	Create and implement
++*   27/10/2005  CH Hsu      Porting to Linux
++*
++****************************************************************************/
++#include 
++#include 
++#include 
++#include 
++#include 
++#include 
++#include 
++#include 
++#include 
++#include 
++#include 
++#include 
++#include 
++#include 
++#include 
++#include 
++#include 
++#include 
++#include 
++#include 
++#include 
++#include 
++#include 
++#include 
++#include 
++#include 
++#include 
++
++#include 
++
++#define	 MIDWAY
++#define	 SL_LEPUS
++#define VITESSE_G5SWITCH	1
++
++#ifndef CONFIG_SL351x_RXTOE
++//#define CONFIG_SL351x_RXTOE	1
++#endif
++#undef CONFIG_SL351x_RXTOE
++
++#include 
++#include 
++#include 
++#include 
++
++#ifdef CONFIG_SL351x_SYSCTL
++#include 
++#endif
++
++#ifdef CONFIG_SL351x_RXTOE
++#include 
++#include 
++#include 
++#include 
++#endif
++
++// #define SL351x_TEST_WORKAROUND
++#ifdef CONFIG_SL351x_NAT
++#define CONFIG_SL_NAPI					1
++#endif
++#define GMAX_TX_INTR_DISABLED			1
++#define DO_HW_CHKSUM					1
++#define ENABLE_TSO						1
++#define GMAC_USE_TXQ0					1
++// #define NAT_WORKAROUND_BY_RESET_GMAC	1
++// #define HW_RXBUF_BY_KMALLOC			1
++//#define _DUMP_TX_TCP_CONTENT	1
++#define	br_if_ioctl						1
++#define GMAC_LEN_1_2_ISSUE				1
++
++#define GMAC_EXISTED_FLAG			0x5566abcd
++#define CONFIG_MAC_NUM				GMAC_NUM
++#define GMAC0_BASE					TOE_GMAC0_BASE
++#define GMAC1_BASE					TOE_GMAC1_BASE
++#define PAUSE_SET_HW_FREEQ			(TOE_HW_FREEQ_DESC_NUM / 2)
++#define PAUSE_REL_HW_FREEQ			((TOE_HW_FREEQ_DESC_NUM / 2) + 10)
++#define DEFAULT_RXQ_MAX_CNT			256
++#ifdef	L2_jumbo_frame
++#define TCPHDRLEN(tcp_hdr)  ((ntohs(*((__u16 *)tcp_hdr + 6)) >> 12) & 0x000F)
++#endif
++
++/* define chip information */
++#define DRV_NAME					"SL351x"
++#define DRV_VERSION					"0.1.4"
++#define SL351x_DRIVER_NAME  		DRV_NAME " Giga Ethernet driver " DRV_VERSION
++
++#define toe_gmac_enable_interrupt(irq)	enable_irq(irq)
++#define toe_gmac_disable_interrupt(irq)	disable_irq(irq)
++
++#ifdef SL351x_GMAC_WORKAROUND
++#define GMAC_SHORT_FRAME_THRESHOLD		10
++static struct timer_list gmac_workround_timer_obj;
++void sl351x_poll_gmac_hanged_status(u32 data);
++#ifdef CONFIG_SL351x_NAT
++//#define IxscriptMate_1518				1
++	void sl351x_nat_workaround_init(void);
++	#ifndef NAT_WORKAROUND_BY_RESET_GMAC
++		static void sl351x_nat_workaround_handler(void);
++	#endif
++#endif
++#endif
++
++#ifdef GMAC_LEN_1_2_ISSUE
++	#define _DEBUG_PREFETCH_NUM	256
++static	int	_debug_prefetch_cnt;
++static	char _debug_prefetch_buf[_DEBUG_PREFETCH_NUM][4] __attribute__((aligned(4)));
++#endif
++/*************************************************************
++ *         Global Variable
++ *************************************************************/
++static int	gmac_initialized = 0;
++TOE_INFO_T toe_private_data;
++//static int		do_again = 0;
++spinlock_t gmac_fq_lock;
++unsigned int FLAG_SWITCH;
++
++static unsigned int     	next_tick = 3 * HZ;
++static unsigned char    	eth_mac[CONFIG_MAC_NUM][6]= {{0x00,0x11,0x11,0x87,0x87,0x87}, {0x00,0x22,0x22,0xab,0xab,0xab}};
++
++#undef CONFIG_SL351x_RXTOE
++extern NAT_CFG_T nat_cfg;
++
++/************************************************/
++/*                 function declare             */
++/************************************************/
++static int gmac_set_mac_address(struct net_device *dev, void *addr);
++static unsigned int gmac_get_phy_vendor(int phy_addr);
++static void gmac_set_phy_status(struct net_device *dev);
++void gmac_get_phy_status(struct net_device *dev);
++static int gmac_netdev_ioctl(struct net_device *dev, struct ifreq *rq, int cmd);
++static void gmac_tx_timeout(struct net_device *dev);
++static int gmac_phy_thread (void *data);
++struct net_device_stats * gmac_get_stats(struct net_device *dev);
++static int gmac_start_xmit(struct sk_buff *skb, struct net_device *dev);
++static void gmac_set_rx_mode(struct net_device *dev);
++static irqreturn_t toe_gmac_interrupt (int irq, void *dev_instance);
++static void toe_gmac_handle_default_rxq(struct net_device *dev, GMAC_INFO_T *tp);
++unsigned int mii_read(unsigned char phyad,unsigned char regad);
++void mii_write(unsigned char phyad,unsigned char regad,unsigned int value);
++void mac_init_drv(void);
++
++static void toe_init_free_queue(void);
++static void toe_init_swtx_queue(void);
++static void toe_init_default_queue(void);
++#ifdef CONFIG_SL351x_RXTOE
++static void toe_init_interrupt_queue(void);
++#endif
++static void toe_init_interrupt_config(void);
++static void toe_gmac_sw_reset(void);
++static int toe_gmac_init_chip(struct net_device *dev);
++static void toe_gmac_enable_tx_rx(struct net_device* dev);
++static void toe_gmac_disable_tx_rx(struct net_device *dev);
++static void toe_gmac_hw_start(struct net_device *dev);
++static void toe_gmac_hw_stop(struct net_device *dev);
++static int toe_gmac_clear_counter(struct net_device *dev);
++static void toe_init_gmac(struct net_device *dev);
++static  void toe_gmac_tx_complete(GMAC_INFO_T *tp, unsigned int tx_qid, struct net_device *dev, int interrupt);
++#ifdef CONFIG_SL_NAPI
++static int gmac_rx_poll(struct net_device *dev, int *budget);
++// static void toe_gmac_disable_rx(struct net_device *dev);
++// static void toe_gmac_enable_rx(struct net_device *dev);
++#endif
++
++u32 mac_read_dma_reg(int mac, unsigned int offset);
++void mac_write_dma_reg(int mac, unsigned int offset, u32 data);
++void mac_stop_txdma(struct net_device *dev);
++void mac_get_sw_tx_weight(struct net_device *dev, char *weight);
++void mac_set_sw_tx_weight(struct net_device *dev, char *weight);
++void mac_get_hw_tx_weight(struct net_device *dev, char *weight);
++void mac_set_hw_tx_weight(struct net_device *dev, char *weight);
++static inline void toe_gmac_fill_free_q(void);
++
++#ifdef VITESSE_G5SWITCH
++extern int Get_Set_port_status(void);
++extern int SPI_default(void);
++extern unsigned int SPI_get_identifier(void);
++void gmac_get_switch_status(struct net_device *dev);
++unsigned int Giga_switch=0;
++unsigned int switch_port_no=0;
++unsigned int ever_dwon=0;
++#endif
++
++/************************************************/
++/*            GMAC function declare             */
++/************************************************/
++static int gmac_open (struct net_device *dev);
++static int gmac_close (struct net_device *dev);
++static void gmac_cleanup_module(void);
++static void gmac_get_mac_address(void);
++
++#ifdef CONFIG_SL351x_NAT
++static void toe_init_hwtx_queue(void);
++extern void sl351x_nat_init(void);
++extern void sl351x_nat_input(struct sk_buff *skb, int port, void *l3off, void *l4off);
++extern int sl351x_nat_output(struct sk_buff *skb, int port);
++extern int sl351x_nat_ioctl(struct net_device *dev, struct ifreq *rq, int cmd);
++#endif
++
++#ifdef CONFIG_SL351x_RXTOE
++extern void set_toeq_hdr(struct toe_conn* connection, TOE_INFO_T* toe, struct net_device *dev);
++extern void sl351x_toe_init(void);
++extern void toe_gmac_handle_toeq(struct net_device *dev, GMAC_INFO_T* tp, __u32 status);
++extern struct toe_conn* init_toeq(int ipver, void* iph, struct tcphdr* tcp_hdr, TOE_INFO_T* toe, unsigned char* l2hdr);
++#endif
++
++int mac_set_rule_reg(int mac, int rule, int enabled, u32 reg0, u32 reg1, u32 reg2);
++void mac_set_rule_enable_bit(int mac, int rule, int data);
++int mac_set_rule_action(int mac, int rule, int data);
++int mac_get_MRxCRx(int mac, int rule, int ctrlreg);
++void mac_set_MRxCRx(int mac, int rule, int ctrlreg, u32 data);
++
++/*----------------------------------------------------------------------
++*	Ethernet Driver init
++*----------------------------------------------------------------------*/
++
++static int __init gmac_init_module(void)
++{
++	GMAC_INFO_T 		*tp;
++	struct net_device	*dev;
++	int 		i,j;
++	unsigned int	chip_id;
++//	unsigned int chip_version;
++
++#ifdef CONFIG_SL3516_ASIC
++{
++    unsigned int    val;
++    /* set GMAC global register */
++    val = readl(GMAC_GLOBAL_BASE_ADDR+0x10);
++    val = val | 0x005f0000;
++    writel(val,GMAC_GLOBAL_BASE_ADDR+0x10);
++//    writel(0xb737b737,GMAC_GLOBAL_BASE_ADDR+0x1c); //For Socket Board
++    writel(0x77777777,GMAC_GLOBAL_BASE_ADDR+0x20);
++//    writel(0xa737b747,GMAC_GLOBAL_BASE_ADDR+0x1c);//For Mounting Board
++
++	//debug_Aaron
++    //writel(0xa7f0a7f0,GMAC_GLOBAL_BASE_ADDR+0x1c);//For Mounting Board
++    writel(0xa7f0b7f0,GMAC_GLOBAL_BASE_ADDR+0x1c);//For Mounting Board
++
++    writel(0x77777777,GMAC_GLOBAL_BASE_ADDR+0x24);
++	writel(0x09200030,GMAC_GLOBAL_BASE_ADDR+0x2C);
++	val = readl(GMAC_GLOBAL_BASE_ADDR+0x04);
++	if((val&(1<<20))==0){           // GMAC1 enable
++ 		val = readl(GMAC_GLOBAL_BASE_ADDR+0x30);
++		val = (val & 0xe7ffffff) | 0x08000000;
++		writel(val,GMAC_GLOBAL_BASE_ADDR+0x30);
++	}
++}
++#endif
++
++#ifdef VITESSE_G5SWITCH
++	Giga_switch = SPI_get_identifier();
++	if(Giga_switch)
++		switch_port_no = SPI_default();
++#endif
++
++	chip_id = readl(GMAC_GLOBAL_BASE_ADDR+0x0);
++	if (chip_id == 0x3512C1)
++	{
++		writel(0x5787a5f0,GMAC_GLOBAL_BASE_ADDR+0x1c);//For 3512 Switch Board
++		writel(0x55557777,GMAC_GLOBAL_BASE_ADDR+0x20);//For 3512 Switch Board
++	}
++//#endif
++
++	mac_init_drv();
++
++	printk (KERN_INFO SL351x_DRIVER_NAME " built at %s %s\n", __DATE__, __TIME__);
++
++//	init_waitqueue_entry(&wait, current);
++
++	// printk("GMAC Init......\n");
++
++	i = 0;
++	for(j = 0; idev = NULL;
++		if (tp->existed != GMAC_EXISTED_FLAG) continue;
++
++		dev = alloc_etherdev(0);
++		if (dev == NULL)
++		{
++			printk (KERN_ERR "Can't allocate ethernet device #%d .\n",i);
++			return -ENOMEM;
++		}
++
++		dev->priv=tp;
++		tp->dev = dev;
++
++		SET_MODULE_OWNER(dev);
++
++		// spin_lock_init(&tp->lock);
++		spin_lock_init(&gmac_fq_lock);
++		dev->base_addr = tp->base_addr;
++		dev->irq = tp->irq;
++	    dev->open = gmac_open;
++	    dev->stop = gmac_close;
++		dev->hard_start_xmit = gmac_start_xmit;
++		dev->get_stats = gmac_get_stats;
++		dev->set_multicast_list = gmac_set_rx_mode;
++		dev->set_mac_address = gmac_set_mac_address;
++		dev->do_ioctl = gmac_netdev_ioctl;
++		dev->tx_timeout = gmac_tx_timeout;
++		dev->watchdog_timeo = GMAC_DEV_TX_TIMEOUT;
++#ifdef	L2_jumbo_frame
++		dev->mtu = 2018; //2002  ,2018
++#endif
++		if (tp->port_id == 0)
++			dev->tx_queue_len = TOE_GMAC0_SWTXQ_DESC_NUM;
++		else
++			dev->tx_queue_len = TOE_GMAC1_SWTXQ_DESC_NUM;
++
++#ifdef DO_HW_CHKSUM
++		dev->features |= NETIF_F_SG|NETIF_F_HW_CSUM;
++#ifdef ENABLE_TSO
++		dev->features |= NETIF_F_TSO;
++#endif
++#endif
++#ifdef CONFIG_SL_NAPI
++        dev->poll = gmac_rx_poll;
++        dev->weight = 64;
++#endif
++
++		if (register_netdev(dev))
++		{
++			gmac_cleanup_module();
++			return(-1);
++		}
++	}
++
++
++//	FLAG_SWITCH = 0 ;
++//	FLAG_SWITCH = SPI_get_identifier();
++//	if(FLAG_SWITCH)
++//	{
++//		printk("Configure ADM699X...\n");
++//		SPI_default();	//Add by jason for ADM699X configuration
++//	}
++	return (0);
++}
++
++/*----------------------------------------------------------------------
++*	gmac_cleanup_module
++*----------------------------------------------------------------------*/
++
++static void gmac_cleanup_module(void)
++{
++    int i;
++
++#ifdef SL351x_GMAC_WORKAROUND
++	del_timer(&gmac_workround_timer_obj);
++#endif
++
++    for (i=0;igmac[0].base_addr = GMAC0_BASE;
++		toe->gmac[1].base_addr = GMAC1_BASE;
++		toe->gmac[0].dma_base_addr = TOE_GMAC0_DMA_BASE;
++		toe->gmac[1].dma_base_addr = TOE_GMAC1_DMA_BASE;
++        toe->gmac[0].auto_nego_cfg = 1;
++        toe->gmac[1].auto_nego_cfg = 1;
++#ifdef CONFIG_SL3516_ASIC
++        toe->gmac[0].speed_cfg = GMAC_SPEED_1000;
++        toe->gmac[1].speed_cfg = GMAC_SPEED_1000;
++#else
++		toe->gmac[0].speed_cfg = GMAC_SPEED_100;
++        toe->gmac[1].speed_cfg = GMAC_SPEED_100;
++#endif
++        toe->gmac[0].full_duplex_cfg = 1;
++        toe->gmac[1].full_duplex_cfg = 1;
++#ifdef CONFIG_SL3516_ASIC
++        toe->gmac[0].phy_mode = GMAC_PHY_RGMII_1000;
++        toe->gmac[1].phy_mode = GMAC_PHY_RGMII_1000;
++#else
++		toe->gmac[0].phy_mode = GMAC_PHY_RGMII_100;
++        toe->gmac[1].phy_mode = GMAC_PHY_RGMII_100;
++#endif
++        toe->gmac[0].port_id = GMAC_PORT0;
++        toe->gmac[1].port_id = GMAC_PORT1;
++        toe->gmac[0].phy_addr = 0x1;
++        toe->gmac[1].phy_addr = 2;
++//      toe->gmac[0].irq = SL2312_INTERRUPT_GMAC0;
++		toe->gmac[0].irq =1;
++//      toe->gmac[1].irq = SL2312_INTERRUPT_GMAC1;
++		toe->gmac[1].irq =2;
++        toe->gmac[0].mac_addr1 = ð_mac[0][0];
++        toe->gmac[1].mac_addr1 = ð_mac[1][0];
++
++		for (i=0; igmac[i].base_addr, GMAC_STA_ADD2, 0x55aa55aa, 0xffffffff);
++			data = gmac_read_reg(toe->gmac[i].base_addr, GMAC_STA_ADD2);
++			if (data == 0x55aa55aa)
++			{
++#ifdef VITESSE_G5SWITCH
++				if(Giga_switch && (i==1)){
++					toe->gmac[i].existed = GMAC_EXISTED_FLAG;
++					break;
++				}
++#endif
++				phy_vendor = gmac_get_phy_vendor(toe->gmac[i].phy_addr);
++				if (phy_vendor != 0 && phy_vendor != 0xffffffff)
++					toe->gmac[i].existed = GMAC_EXISTED_FLAG;
++			}
++		}
++
++		// Write GLOBAL_QUEUE_THRESHOLD_REG
++		threshold.bits32 = 0;
++		threshold.bits.swfq_empty = (TOE_SW_FREEQ_DESC_NUM > 256) ? 255 :
++		                                        TOE_SW_FREEQ_DESC_NUM/2;
++		threshold.bits.hwfq_empty = (TOE_HW_FREEQ_DESC_NUM > 256) ? 256/4 :
++		                                        TOE_HW_FREEQ_DESC_NUM/4;
++		threshold.bits.toe_class = (TOE_TOE_DESC_NUM > 256) ? 256/4 :
++		                                        TOE_TOE_DESC_NUM/4;
++		threshold.bits.intrq = (TOE_INTR_DESC_NUM > 256) ? 256/4 :
++		                                        TOE_INTR_DESC_NUM/4;
++		writel(threshold.bits32, TOE_GLOBAL_BASE + GLOBAL_QUEUE_THRESHOLD_REG);
++
++		FLAG_SWITCH = 0;
++		toe_gmac_sw_reset();
++		toe_init_free_queue();
++		toe_init_swtx_queue();
++#ifdef CONFIG_SL351x_NAT
++		toe_init_hwtx_queue();
++#endif
++		toe_init_default_queue();
++#ifdef CONFIG_SL351x_RXTOE
++		toe_init_interrupt_queue();
++#endif
++		toe_init_interrupt_config();
++
++#if defined(CONFIG_SL351x_NAT) || defined(CONFIG_SL351x_RXTOE)
++		sl351x_hash_init();
++#else
++	{
++		volatile u32 *dp1, *dp2, dword;
++
++		dp1 = (volatile u32 *) TOE_V_BIT_BASE;
++		dp2 = (volatile u32 *) TOE_A_BIT_BASE;
++
++		for (i=0; isw_freeq_desc_base_dma) ;
++	sw_desc_ptr = (GMAC_RXDESC_T *)desc_buf;
++	if (!desc_buf)
++	{
++		printk("%s::DMA_MALLOC fail !\n",__func__);
++		return;
++	}
++	memset((void *)desc_buf, 0, TOE_SW_FREEQ_DESC_NUM * sizeof(GMAC_RXDESC_T));
++
++	// DMA Queue Base & Size
++	writel((toe->sw_freeq_desc_base_dma & DMA_Q_BASE_MASK) | TOE_SW_FREEQ_DESC_POWER,
++			TOE_GLOBAL_BASE + GLOBAL_SW_FREEQ_BASE_SIZE_REG);
++
++	// init descriptor base
++	toe->swfq_desc_base = desc_buf;
++
++	// SW Free Queue Read/Write Pointer
++	rwptr_reg.bits.wptr = TOE_SW_FREEQ_DESC_NUM - 1;
++	rwptr_reg.bits.rptr = 0;
++	toe->fq_rx_rwptr.bits32 = rwptr_reg.bits32;
++	writel(rwptr_reg.bits32, TOE_GLOBAL_BASE + GLOBAL_SWFQ_RWPTR_REG);
++
++	// SW Free Queue Descriptors
++	for (i=0; iword0.bits.buffer_size = SW_RX_BUF_SIZE;
++		sw_desc_ptr->word1.bits.sw_id = i;	// used to locate skb
++		if ( (skb = dev_alloc_skb(SW_RX_BUF_SIZE))==NULL)  /* allocate socket buffer */
++		{
++			printk("%s::skb buffer allocation fail !\n",__func__); while(1);
++		}
++		REG32(skb->data) = (unsigned int)skb;
++		skb_reserve(skb, SKB_RESERVE_BYTES);
++		// toe->rx_skb[i] = skb;
++		sw_desc_ptr->word2.buf_adr = (unsigned int)__pa(skb->data);
++//   		consistent_sync((unsigned int)desc_ptr, sizeof(GMAC_RXDESC_T), PCI_DMA_TODEVICE);
++   		sw_desc_ptr++;
++	}
++
++#ifdef CONFIG_SL351x_NAT
++	if (sizeof(skb->cb) < 64)
++	{
++			printk("==> %s:: sk structure is incorrect -->Change to cb[64] !\n",__func__); while(1);
++	}
++	// init hardware free queues
++	desc_buf = (unsigned int)DMA_MALLOC((TOE_HW_FREEQ_DESC_NUM * sizeof(GMAC_RXDESC_T)),
++						(dma_addr_t *)&toe->hw_freeq_desc_base_dma) ;
++	desc_ptr = (GMAC_RXDESC_T *)desc_buf;
++	if (!desc_buf)
++	{
++		printk("%s::DMA_MALLOC fail !\n",__func__);
++		return;
++	}
++	memset((void *)desc_buf, 0, TOE_HW_FREEQ_DESC_NUM * sizeof(GMAC_RXDESC_T));
++
++	// DMA Queue Base & Size
++	writel((toe->hw_freeq_desc_base_dma & DMA_Q_BASE_MASK) | TOE_HW_FREEQ_DESC_POWER,
++			TOE_GLOBAL_BASE + GLOBAL_HW_FREEQ_BASE_SIZE_REG);
++
++	// init descriptor base
++	toe->hwfq_desc_base = desc_buf;
++
++	// HW Free Queue Read/Write Pointer
++	rwptr_reg.bits.wptr = TOE_HW_FREEQ_DESC_NUM - 1;
++	rwptr_reg.bits.rptr = 0;
++	writel(rwptr_reg.bits32, TOE_GLOBAL_BASE + GLOBAL_HWFQ_RWPTR_REG);
++#ifndef HW_RXBUF_BY_KMALLOC
++	buf_ptr = (unsigned int)DMA_MALLOC(TOE_HW_FREEQ_DESC_NUM * HW_RX_BUF_SIZE,
++						(dma_addr_t *)&toe->hwfq_buf_base_dma);
++#else
++	buf_ptr = (unsigned int)kmalloc(TOE_HW_FREEQ_DESC_NUM * HW_RX_BUF_SIZE, GFP_KERNEL);
++	toe->hwfq_buf_base_dma = __pa(buf_ptr);
++#endif
++	if (!buf_ptr)
++	{
++		printk("===> %s::Failed to allocate HW TxQ Buffers!\n",__func__);
++		while(1);	// could not be happened, if happened, adjust the buffer descriptor number
++		return;
++	}
++
++	toe->hwfq_buf_base = buf_ptr;
++	toe->hwfq_buf_end_dma = toe->hwfq_buf_base_dma + (TOE_HW_FREEQ_DESC_NUM * HW_RX_BUF_SIZE);
++	buf_ptr = (unsigned int)toe->hwfq_buf_base_dma;
++	for (i=0; iword0.bits.buffer_size = HW_RX_BUF_SIZE;
++		desc_ptr->word1.bits.sw_id = i;
++		desc_ptr->word2.buf_adr = (unsigned int)buf_ptr;
++//   		consistent_sync((unsigned int)desc_ptr, sizeof(GMAC_RXDESC_T), PCI_DMA_TODEVICE);
++   		// consistent_sync((unsigned int)buf_ptr, HW_RX_BUF_SIZE, PCI_DMA_TODEVICE);
++   		desc_ptr++;
++   		buf_ptr += HW_RX_BUF_SIZE;
++	}
++#else
++	// DMA Queue Base & Size
++	writel((0) | TOE_SW_FREEQ_DESC_POWER,
++			TOE_GLOBAL_BASE + GLOBAL_HW_FREEQ_BASE_SIZE_REG);
++	rwptr_reg.bits.wptr = TOE_HW_FREEQ_DESC_NUM - 1;
++	rwptr_reg.bits.rptr = 0;
++	writel(rwptr_reg.bits32, TOE_GLOBAL_BASE + GLOBAL_HWFQ_RWPTR_REG);
++
++#endif
++}
++/*----------------------------------------------------------------------
++*	toe_init_swtx_queue
++*	(2) Initialize the GMAC 0/1 SW TXQ Queue Descriptor Base Address & sizeup
++*		GMAC_SW_TX_QUEUE_BASE_REG(0x0050)
++*	(2) Initialize DMA Read/Write pointer for
++*		GMAC 0/1 SW TX Q0-5
++*----------------------------------------------------------------------*/
++static void toe_init_swtx_queue(void)
++{
++	int 				i;
++	TOE_INFO_T			*toe;
++	DMA_RWPTR_T			rwptr_reg;
++	unsigned int 		rwptr_addr;
++	unsigned int		desc_buf;
++
++
++	toe = (TOE_INFO_T *)&toe_private_data;
++
++	// GMAC-0, SW-TXQ
++	// The GMAC-0 and GMAC-0 maybe have different descriptor number
++	// so, not use for instruction
++	desc_buf = (unsigned int)DMA_MALLOC((TOE_GMAC0_SWTXQ_DESC_NUM * TOE_SW_TXQ_NUM * sizeof(GMAC_TXDESC_T)),
++						(dma_addr_t *)&toe->gmac[0].swtxq_desc_base_dma) ;
++	toe->gmac[0].swtxq_desc_base = desc_buf;
++	if (!desc_buf)
++	{
++		printk("%s::DMA_MALLOC fail !\n",__func__);
++		return	;
++	}
++	memset((void *)desc_buf, 0,	TOE_GMAC0_SWTXQ_DESC_NUM * TOE_SW_TXQ_NUM * sizeof(GMAC_TXDESC_T));
++	writel((toe->gmac[0].swtxq_desc_base_dma & DMA_Q_BASE_MASK) | TOE_GMAC0_SWTXQ_DESC_POWER,
++			TOE_GMAC0_DMA_BASE+ GMAC_SW_TX_QUEUE_BASE_REG);
++
++	// GMAC0 SW TX Q0-Q5
++	rwptr_reg.bits.wptr = 0;
++	rwptr_reg.bits.rptr = 0;
++	rwptr_addr = TOE_GMAC0_DMA_BASE + GMAC_SW_TX_QUEUE0_PTR_REG;
++	for (i=0; igmac[0].swtxq[i].rwptr_reg = rwptr_addr;
++		toe->gmac[0].swtxq[i].desc_base = desc_buf;
++		toe->gmac[0].swtxq[i].total_desc_num = TOE_GMAC0_SWTXQ_DESC_NUM;
++		desc_buf += TOE_GMAC0_SWTXQ_DESC_NUM * sizeof(GMAC_TXDESC_T);
++		writel(rwptr_reg.bits32, rwptr_addr);
++		rwptr_addr+=4;
++	}
++
++	// GMAC-1, SW-TXQ
++	desc_buf = (unsigned int)DMA_MALLOC((TOE_GMAC1_SWTXQ_DESC_NUM * TOE_SW_TXQ_NUM * sizeof(GMAC_TXDESC_T)),
++						(dma_addr_t *)&toe->gmac[1].swtxq_desc_base_dma) ;
++	toe->gmac[1].swtxq_desc_base = desc_buf;
++	if (!desc_buf)
++	{
++		printk("%s::DMA_MALLOC fail !\n",__func__);
++		return	;
++	}
++	memset((void *)desc_buf, 0,	TOE_GMAC1_SWTXQ_DESC_NUM * TOE_SW_TXQ_NUM * sizeof(GMAC_TXDESC_T));
++	writel((toe->gmac[1].swtxq_desc_base_dma & DMA_Q_BASE_MASK) | TOE_GMAC1_SWTXQ_DESC_POWER,
++			TOE_GMAC1_DMA_BASE+ GMAC_SW_TX_QUEUE_BASE_REG);
++
++
++	// GMAC1 SW TX Q0-Q5
++	rwptr_reg.bits.wptr = 0;
++	rwptr_reg.bits.rptr = 0;
++	rwptr_addr = TOE_GMAC1_DMA_BASE + GMAC_SW_TX_QUEUE0_PTR_REG;
++	for (i=0; igmac[1].swtxq[i].rwptr_reg = rwptr_addr;
++		toe->gmac[1].swtxq[i].desc_base = desc_buf;
++		toe->gmac[1].swtxq[i].total_desc_num = TOE_GMAC1_SWTXQ_DESC_NUM;
++		desc_buf += TOE_GMAC1_SWTXQ_DESC_NUM * sizeof(GMAC_TXDESC_T);
++		writel(rwptr_reg.bits32, rwptr_addr);
++		rwptr_addr+=4;
++	}
++}
++
++/*----------------------------------------------------------------------
++*	toe_init_hwtx_queue
++*	(2) Initialize the GMAC 0/1 HW TXQ Queue Descriptor Base Address & size
++*		GMAC_HW_TX_QUEUE_BASE_REG(0x0054)
++*	(2) Initialize DMA Read/Write pointer for
++*		GMAC 0/1 HW TX Q0-5
++*----------------------------------------------------------------------*/
++#ifdef CONFIG_SL351x_NAT
++static void toe_init_hwtx_queue(void)
++{
++	int 				i;
++	TOE_INFO_T			*toe;
++	DMA_RWPTR_T			rwptr_reg;
++	unsigned int 		rwptr_addr;
++	unsigned int		desc_buf;
++
++	toe = (TOE_INFO_T *)&toe_private_data;
++	// GMAC-0, HW-TXQ
++	// The GMAC-0 and GMAC-0 maybe have different descriptor number
++	// so, not use for instruction
++	desc_buf = (unsigned int)DMA_MALLOC((TOE_GMAC0_HWTXQ_DESC_NUM * TOE_HW_TXQ_NUM * sizeof(GMAC_TXDESC_T)),
++						(dma_addr_t *)&toe->gmac[0].hwtxq_desc_base_dma) ;
++	toe->gmac[0].hwtxq_desc_base = desc_buf;
++	if (!desc_buf)
++	{
++		printk("%s::DMA_MALLOC fail !\n",__func__);
++		return	;
++	}
++	memset((void *)desc_buf, 0,	TOE_GMAC0_HWTXQ_DESC_NUM * TOE_HW_TXQ_NUM * sizeof(GMAC_TXDESC_T));
++	writel((toe->gmac[0].hwtxq_desc_base_dma & DMA_Q_BASE_MASK) | TOE_GMAC0_HWTXQ_DESC_POWER,
++			TOE_GMAC0_DMA_BASE+ GMAC_HW_TX_QUEUE_BASE_REG);
++
++	// GMAC0 HW TX Q0-Q5
++	rwptr_reg.bits.wptr = 0;
++	rwptr_reg.bits.rptr = 0;
++	rwptr_addr = TOE_GMAC0_DMA_BASE + GMAC_HW_TX_QUEUE0_PTR_REG;
++	for (i=0; igmac[0].hwtxq[i].desc_base = desc_buf;
++		desc_buf += TOE_GMAC0_HWTXQ_DESC_NUM * sizeof(GMAC_TXDESC_T);
++		writel(rwptr_reg.bits32, rwptr_addr);
++		rwptr_addr+=4;
++	}
++
++	// GMAC-1, HW-TXQ
++	desc_buf = (unsigned int)DMA_MALLOC((TOE_GMAC1_HWTXQ_DESC_NUM * TOE_HW_TXQ_NUM * sizeof(GMAC_TXDESC_T)),
++						(dma_addr_t *)&toe->gmac[1].hwtxq_desc_base_dma) ;
++	toe->gmac[1].hwtxq_desc_base = desc_buf;
++	if (!desc_buf)
++	{
++		printk("%s::DMA_MALLOC fail !\n",__func__);
++		return	;
++	}
++	memset((void *)desc_buf, 0,	TOE_GMAC1_HWTXQ_DESC_NUM * TOE_HW_TXQ_NUM * sizeof(GMAC_TXDESC_T));
++	writel((toe->gmac[1].hwtxq_desc_base_dma & DMA_Q_BASE_MASK) | TOE_GMAC1_HWTXQ_DESC_POWER,
++			TOE_GMAC1_DMA_BASE+ GMAC_HW_TX_QUEUE_BASE_REG);
++
++	// GMAC1 HW TX Q0-Q5
++	rwptr_reg.bits.wptr = 0;
++	rwptr_reg.bits.rptr = 0;
++	rwptr_addr = TOE_GMAC1_DMA_BASE + GMAC_HW_TX_QUEUE0_PTR_REG;
++	for (i=0; igmac[1].hwtxq[i].desc_base = desc_buf;
++		desc_buf += TOE_GMAC1_HWTXQ_DESC_NUM * sizeof(GMAC_TXDESC_T);
++		writel(rwptr_reg.bits32, rwptr_addr);
++		rwptr_addr+=4;
++	}
++}
++#endif
++
++/*----------------------------------------------------------------------
++*	toe_init_default_queue
++*	(1) Initialize the default 0/1 Queue Header
++*		Register: TOE_DEFAULT_Q0_HDR_BASE (0x60002000)
++*				  TOE_DEFAULT_Q1_HDR_BASE (0x60002008)
++*	(2)	Initialize Descriptors of Default Queue 0/1
++*----------------------------------------------------------------------*/
++static void toe_init_default_queue(void)
++{
++	TOE_INFO_T				*toe;
++	volatile NONTOE_QHDR_T	*qhdr;
++	GMAC_RXDESC_T			*desc_ptr;
++	DMA_SKB_SIZE_T			skb_size;
++
++	toe = (TOE_INFO_T *)&toe_private_data;
++	desc_ptr = (GMAC_RXDESC_T *)DMA_MALLOC((TOE_DEFAULT_Q0_DESC_NUM * sizeof(GMAC_RXDESC_T)),
++											(dma_addr_t *)&toe->gmac[0].default_desc_base_dma);
++	if (!desc_ptr)
++	{
++		printk("%s::DMA_MALLOC fail !\n",__func__);
++		return	;
++	}
++	memset((void *)desc_ptr, 0, TOE_DEFAULT_Q0_DESC_NUM * sizeof(GMAC_RXDESC_T));
++	toe->gmac[0].default_desc_base = (unsigned int)desc_ptr;
++	toe->gmac[0].default_desc_num = TOE_DEFAULT_Q0_DESC_NUM;
++	qhdr = (volatile NONTOE_QHDR_T *)TOE_DEFAULT_Q0_HDR_BASE;
++	qhdr->word0.base_size = ((unsigned int)toe->gmac[0].default_desc_base_dma & NONTOE_QHDR0_BASE_MASK) | TOE_DEFAULT_Q0_DESC_POWER;
++	qhdr->word1.bits32 = 0;
++	toe->gmac[0].rx_rwptr.bits32 = 0;
++	toe->gmac[0].default_qhdr = (NONTOE_QHDR_T *)qhdr;
++	desc_ptr = (GMAC_RXDESC_T *)DMA_MALLOC((TOE_DEFAULT_Q1_DESC_NUM * sizeof(GMAC_RXDESC_T)),
++											(dma_addr_t *)&toe->gmac[1].default_desc_base_dma);
++	if (!desc_ptr)
++	{
++		printk("%s::DMA_MALLOC fail !\n",__func__);
++		return	;
++	}
++	memset((void *)desc_ptr, 0, TOE_DEFAULT_Q1_DESC_NUM * sizeof(GMAC_RXDESC_T));
++	toe->gmac[1].default_desc_base = (unsigned int)desc_ptr;
++	toe->gmac[1].default_desc_num = TOE_DEFAULT_Q1_DESC_NUM;
++	qhdr = (volatile NONTOE_QHDR_T *)TOE_DEFAULT_Q1_HDR_BASE;
++	qhdr->word0.base_size = ((unsigned int)toe->gmac[1].default_desc_base_dma & NONTOE_QHDR0_BASE_MASK) | TOE_DEFAULT_Q1_DESC_POWER;
++	qhdr->word1.bits32 = 0;
++	toe->gmac[1].rx_rwptr.bits32 = 0;
++	toe->gmac[1].default_qhdr = (NONTOE_QHDR_T *)qhdr;
++
++	skb_size.bits.hw_skb_size = HW_RX_BUF_SIZE;
++	skb_size.bits.sw_skb_size = SW_RX_BUF_SIZE;
++	writel(skb_size.bits32, TOE_GLOBAL_BASE + GLOBAL_DMA_SKB_SIZE_REG);
++}
++
++/*----------------------------------------------------------------------
++*	toe_init_interrupt_queue
++*	(1) Initialize the Interrupt Queue Header
++*		Register: TOE_INTR_Q_HDR_BASE (0x60002080)
++*	(2)	Initialize Descriptors of Interrupt Queues
++*----------------------------------------------------------------------*/
++#ifdef CONFIG_SL351x_RXTOE
++static void toe_init_interrupt_queue(void)
++{
++	TOE_INFO_T				*toe;
++	volatile NONTOE_QHDR_T	*qhdr;
++	INTR_QHDR_T				*desc_ptr;
++	// unsigned int			desc_buf_addr;
++	int						i;
++
++	toe = (TOE_INFO_T *)&toe_private_data;
++	desc_ptr = (INTR_QHDR_T *)DMA_MALLOC((TOE_INTR_QUEUE_NUM * TOE_INTR_DESC_NUM * sizeof(INTR_QHDR_T)),
++											(dma_addr_t *)&toe->intr_desc_base_dma);
++	if (!desc_ptr)
++	{
++		printk("%s::DMA_MALLOC interrupt queue fail !\n",__func__);
++		return	;
++	}
++	/*
++	desc_buf_addr = (unsigned int)DMA_MALLOC((TOE_INTR_DESC_NUM * sizeof(TOE_QHDR_T)),
++												(dma_addr_t *)&toe->intr_buf_base_dma);
++	if (!desc_buf_addr)
++	{
++		printk("%s::DMA_MALLOC interrupt desc fail !\n",__func__);
++		return	;
++	}*/
++	printk("#### %s::Intr Q desc %x\n", __func__, (u32)desc_ptr);
++
++	memset((void *)desc_ptr, 0, TOE_INTR_QUEUE_NUM * TOE_INTR_DESC_NUM * sizeof(INTR_QHDR_T));
++//	memset((void *)desc_buf_addr, 0, TOE_INTR_DESC_NUM * sizeof(TOE_QHDR_T));
++	toe->intr_desc_base = (unsigned int)desc_ptr;
++	toe->intr_desc_num = TOE_INTR_DESC_NUM;
++
++	qhdr = (volatile NONTOE_QHDR_T *)TOE_INTR_Q_HDR_BASE;
++//	intrq = (INTRQ_INFO_T*) &toe->intrq[0];
++	for (i=0; iword0.base_size = ((unsigned int)toe->intr_desc_base_dma & NONTOE_QHDR0_BASE_MASK) | TOE_INTR_DESC_POWER;
++		qhdr->word1.bits32 = 0;
++		desc_ptr += TOE_INTR_DESC_NUM;
++	}
++}
++
++#endif
++
++/*----------------------------------------------------------------------
++*	toe_init_interrupt_config
++*	Interrupt Select Registers are used to map interrupt to int0 or int1
++*	Int0 and int1 are wired to CPU 0/1 GMAC 0/1
++* 	Interrupt Device Inteface data are used to pass device info to
++*		upper device deiver or store status/statistics
++*	ISR handler
++*		(1) If status bit ON but masked, the prinf error message (bug issue)
++*		(2) If select bits are for me, handle it, else skip to let
++*			the other ISR handles it.
++*  Notes:
++*		GMACx init routine (for eCOS) or open routine (for Linux)
++*       enable the interrupt bits only which are selected for him.
++*
++*	Default Setting:
++*		GMAC0 intr bits ------>	int0 ----> eth0
++*		GMAC1 intr bits ------> int1 ----> eth1
++*		TOE intr -------------> int0 ----> eth0
++*		Classification Intr --> int0 ----> eth0
++*		Default Q0 -----------> int0 ----> eth0
++*		Default Q1 -----------> int1 ----> eth1
++*----------------------------------------------------------------------*/
++static void toe_init_interrupt_config(void)
++{
++	// clear all status bits
++	writel(0xffffffff, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_STATUS_0_REG);
++	writel(0xffffffff, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_STATUS_1_REG);
++	writel(0xffffffff, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_STATUS_2_REG);
++	writel(0xffffffff, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_STATUS_3_REG);
++	writel(0xffffffff, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_STATUS_4_REG);
++
++	// Init select registers
++	writel(0, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_0_REG);
++	writel(0, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_1_REG);
++	writel(0, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_2_REG);
++	writel(0, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_3_REG);
++	writel(0, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_4_REG);
++
++	// disable all interrupt
++	writel(0, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_0_REG);
++	writel(0, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_1_REG);
++	writel(0, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_2_REG);
++	writel(0, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_3_REG);
++	writel(0, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_4_REG);
++}
++
++/*----------------------------------------------------------------------
++*	toe_init_gmac
++*----------------------------------------------------------------------*/
++static void toe_init_gmac(struct net_device *dev)
++{
++	GMAC_INFO_T		*tp = dev->priv;
++	TOE_INFO_T		*toe;
++	u32 			data;
++
++	if (!gmac_initialized)
++		return ;
++
++	if (!tp->existed)
++		return;
++
++	tp->dev = dev;
++	tp->flow_control_enable = 1;
++	tp->pre_phy_status = LINK_DOWN;
++	tp->full_duplex_status = tp->full_duplex_cfg;
++	tp->speed_status = tp->speed_status;
++
++#if 0
++   /* get mac address from FLASH */
++    gmac_get_mac_address();
++#endif
++
++    /* set PHY register to start autonegition process */
++    gmac_set_phy_status(dev);
++
++	/* GMAC initialization */
++	if ( toe_gmac_init_chip(dev) )
++	{
++		printk ("GMAC %d init fail\n", tp->port_id);
++	}
++
++    /* clear statistic counter */
++    toe_gmac_clear_counter(dev);
++
++	memset((void *)&tp->ifStatics, 0, sizeof(struct net_device_stats));
++
++	/* -----------------------------------------------------------
++	Enable GMAC interrupt & disable loopback
++	Notes:
++		GMACx init routine (for eCOS) or open routine (for Linux)
++		enable the interrupt bits only which are selected for him.
++	--------------------------------------------------------------*/
++	toe = (TOE_INFO_T *)&toe_private_data;
++
++	// Enable Interrupt Bits
++	if (tp->port_id == 0)
++	{
++		tp->intr0_selected =	GMAC0_TXDERR_INT_BIT	 | GMAC0_TXPERR_INT_BIT		|
++	                         	GMAC0_RXDERR_INT_BIT	 | GMAC0_RXPERR_INT_BIT		|
++	                            GMAC0_SWTQ05_FIN_INT_BIT | GMAC0_SWTQ05_EOF_INT_BIT |
++	                            GMAC0_SWTQ04_FIN_INT_BIT | GMAC0_SWTQ04_EOF_INT_BIT |
++	                            GMAC0_SWTQ03_FIN_INT_BIT | GMAC0_SWTQ03_EOF_INT_BIT |
++	                            GMAC0_SWTQ02_FIN_INT_BIT | GMAC0_SWTQ02_EOF_INT_BIT |
++	                            GMAC0_SWTQ01_FIN_INT_BIT | GMAC0_SWTQ01_EOF_INT_BIT |
++	                            GMAC0_SWTQ00_FIN_INT_BIT | GMAC0_SWTQ00_EOF_INT_BIT;
++
++#ifdef GMAX_TX_INTR_DISABLED
++	    tp->intr0_enabled =		0;
++#else
++	    tp->intr0_enabled =		GMAC0_SWTQ00_FIN_INT_BIT | GMAC0_SWTQ00_EOF_INT_BIT;
++#endif
++
++	    tp->intr1_selected =	TOE_IQ_ALL_BITS			 | TOE_CLASS_RX_INT_BITS	|
++	    						GMAC0_HWTQ03_EOF_INT_BIT | GMAC0_HWTQ02_EOF_INT_BIT |
++	    						GMAC0_HWTQ01_EOF_INT_BIT | GMAC0_HWTQ00_EOF_INT_BIT |
++	    						DEFAULT_Q0_INT_BIT;
++	    tp->intr1_enabled = 	DEFAULT_Q0_INT_BIT | TOE_IQ_ALL_BITS;
++	    tp->intr2_selected = 	0xffffffff;	 // TOE Queue 32-63 FUUL Intr
++	    tp->intr2_enabled = 	0xffffffff;
++	    tp->intr3_selected = 	0xffffffff;	 // TOE Queue 0-31 FUUL Intr
++	    tp->intr3_enabled = 	0xffffffff;
++	    tp->intr4_selected = 	GMAC0_INT_BITS | CLASS_RX_FULL_INT_BITS |
++	    						HWFQ_EMPTY_INT_BIT | SWFQ_EMPTY_INT_BIT;
++	    tp->intr4_enabled = 	GMAC0_INT_BITS | SWFQ_EMPTY_INT_BIT;
++
++	    data = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_0_REG) & ~tp->intr0_selected;
++	    writel(data, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_0_REG);
++	    data = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_1_REG) & ~tp->intr1_selected;
++	    writel(data, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_1_REG);
++	    data = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_2_REG) & ~tp->intr2_selected;
++	    writel(data, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_2_REG);
++	    data = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_3_REG) & ~tp->intr3_selected;
++	    writel(data, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_3_REG);
++	    data = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_4_REG) & ~tp->intr4_selected;
++	    writel(data, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_4_REG);
++	}
++	else
++	{
++		tp->intr0_selected =	GMAC1_TXDERR_INT_BIT	 | GMAC1_TXPERR_INT_BIT		|
++	                         	GMAC1_RXDERR_INT_BIT	 | GMAC1_RXPERR_INT_BIT		|
++	                            GMAC1_SWTQ15_FIN_INT_BIT | GMAC1_SWTQ15_EOF_INT_BIT |
++	                            GMAC1_SWTQ14_FIN_INT_BIT | GMAC1_SWTQ14_EOF_INT_BIT |
++	                            GMAC1_SWTQ13_FIN_INT_BIT | GMAC1_SWTQ13_EOF_INT_BIT |
++	                            GMAC1_SWTQ12_FIN_INT_BIT | GMAC1_SWTQ12_EOF_INT_BIT |
++	                            GMAC1_SWTQ11_FIN_INT_BIT | GMAC1_SWTQ11_EOF_INT_BIT |
++	                            GMAC1_SWTQ10_FIN_INT_BIT | GMAC1_SWTQ10_EOF_INT_BIT;
++#ifdef GMAX_TX_INTR_DISABLED
++	    tp->intr0_enabled =		0;
++#else
++	    tp->intr0_enabled =		GMAC1_SWTQ10_FIN_INT_BIT | GMAC1_SWTQ10_EOF_INT_BIT;
++#endif
++
++	    tp->intr1_selected =	DEFAULT_Q1_INT_BIT;
++	    tp->intr1_enabled = 	DEFAULT_Q1_INT_BIT | TOE_IQ_ALL_BITS;
++	    tp->intr2_selected = 	0;	 // TOE Queue 32-63 FUUL Intr
++	    tp->intr2_enabled = 	0;
++	    tp->intr3_selected = 	0;	 // TOE Queue 0-31 FUUL Intr
++	    tp->intr3_enabled = 	0;
++	    tp->intr4_selected = 	GMAC1_INT_BITS;
++	    tp->intr4_enabled = 	GMAC1_INT_BITS;
++
++	    if (toe->gmac[0].existed != GMAC_EXISTED_FLAG)
++	    {
++	    	tp->intr1_selected	|= 	TOE_IQ_ALL_BITS | TOE_CLASS_RX_INT_BITS	|
++	    						  	GMAC0_HWTQ03_EOF_INT_BIT | GMAC0_HWTQ02_EOF_INT_BIT |
++	    						  	GMAC0_HWTQ01_EOF_INT_BIT | GMAC0_HWTQ00_EOF_INT_BIT;
++	    	tp->intr1_enabled	|= 	TOE_IQ_ALL_BITS;
++	    	tp->intr2_selected	|= 	0xffffffff;	 // TOE Queue 32-63 FUUL Intr
++	    	tp->intr2_enabled	|= 	0xffffffff;
++	    	tp->intr3_selected	|= 	0xffffffff;	 // TOE Queue 0-31 FUUL Intr
++	    	tp->intr3_enabled	|= 	0xffffffff;
++	    	tp->intr4_selected 	|= 	CLASS_RX_FULL_INT_BITS |
++	    							HWFQ_EMPTY_INT_BIT | SWFQ_EMPTY_INT_BIT;
++	    	tp->intr4_enabled	|= 	SWFQ_EMPTY_INT_BIT;
++		}
++	    data = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_0_REG) | tp->intr0_selected;
++	    writel(data, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_0_REG);
++	    data = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_1_REG) | tp->intr1_selected;
++	    writel(data, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_1_REG);
++	    data = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_2_REG) | tp->intr2_selected;
++	    writel(data, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_2_REG);
++	    data = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_3_REG) | tp->intr3_selected;
++	    writel(data, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_3_REG);
++	    data = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_4_REG) | tp->intr4_selected;
++	    writel(data, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_4_REG);
++	}
++
++	// enable only selected bits
++	gmac_write_reg(TOE_GLOBAL_BASE, GLOBAL_INTERRUPT_ENABLE_0_REG,
++					tp->intr0_enabled, tp->intr0_selected);
++	gmac_write_reg(TOE_GLOBAL_BASE, GLOBAL_INTERRUPT_ENABLE_1_REG,
++					tp->intr1_enabled, tp->intr1_selected);
++	gmac_write_reg(TOE_GLOBAL_BASE, GLOBAL_INTERRUPT_ENABLE_2_REG,
++					tp->intr2_enabled, tp->intr2_selected);
++	gmac_write_reg(TOE_GLOBAL_BASE, GLOBAL_INTERRUPT_ENABLE_3_REG,
++					tp->intr3_enabled, tp->intr3_selected);
++	gmac_write_reg(TOE_GLOBAL_BASE, GLOBAL_INTERRUPT_ENABLE_4_REG,
++					tp->intr4_enabled, tp->intr4_selected);
++
++    /* start DMA process */
++	toe_gmac_hw_start(dev);
++
++    /* enable tx/rx register */
++    toe_gmac_enable_tx_rx(dev);
++
++//	toe_gmac_enable_interrupt(tp->irq);
++
++    return ;
++}
++
++
++/*----------------------------------------------------------------------
++* toe_gmac_sw_reset
++*----------------------------------------------------------------------*/
++static void toe_gmac_sw_reset(void)
++{
++	unsigned int	reg_val;
++	reg_val = readl(GMAC_GLOBAL_BASE_ADDR+GLOBAL_RESET_REG) | 0x00000060;   /* GMAC0 S/W reset */
++    writel(reg_val,GMAC_GLOBAL_BASE_ADDR+GLOBAL_RESET_REG);
++    udelay(100);
++    return;
++}
++
++/*----------------------------------------------------------------------
++*	toe_gmac_init_chip
++*----------------------------------------------------------------------*/
++static int toe_gmac_init_chip(struct net_device *dev)
++{
++	GMAC_INFO_T 	*tp = dev->priv;
++	GMAC_CONFIG2_T	config2_val;
++	GMAC_CONFIG0_T	config0,config0_mask;
++	GMAC_CONFIG1_T	config1;
++	#ifdef CONFIG_SL351x_NAT
++	GMAC_CONFIG3_T	config3_val;
++	#endif
++	GMAC_TX_WCR0_T	hw_weigh;
++	GMAC_TX_WCR1_T	sw_weigh;
++//	GMAC_HASH_ENABLE_REG0_T hash_ctrl;
++//
++#if 0 /* mac address will be set in late_initcall */
++	struct sockaddr sock;
++	// GMAC_AHB_WEIGHT_T	ahb_weight, ahb_weight_mask;
++
++
++	/* set station MAC address1 and address2 */
++	memcpy(&sock.sa_data[0],ð_mac[tp->port_id][0],6);
++	gmac_set_mac_address(dev,(void *)&sock);
++#endif
++
++	/* set RX_FLTR register to receive all multicast packet */
++	gmac_write_reg(tp->base_addr, GMAC_RX_FLTR, 0x00000007,0x0000001f);
++	//    gmac_write_reg(tp->base_addr, GMAC_RX_FLTR, 0x00000007,0x0000001f);
++	//gmac_write_reg(tp->base_addr, GMAC_RX_FLTR,0x00000007,0x0000001f);
++
++	/* set per packet buffer size */
++	//	config1.bits32 = 0x002004;	//next version
++	/* set flow control threshold */
++	config1.bits32 = 0;
++	config1.bits.set_threshold = 32 / 2;
++	config1.bits.rel_threshold = 32 / 4 * 3;
++	gmac_write_reg(tp->base_addr, GMAC_CONFIG1, config1.bits32, 0xffffffff);
++
++	/* set flow control threshold */
++	config2_val.bits32 = 0;
++	config2_val.bits.set_threshold = TOE_SW_FREEQ_DESC_NUM/2;
++	config2_val.bits.rel_threshold = TOE_SW_FREEQ_DESC_NUM*3/4;
++	gmac_write_reg(tp->base_addr, GMAC_CONFIG2, config2_val.bits32,0xffffffff);
++
++	#ifdef CONFIG_SL351x_NAT
++	/* set HW free queue flow control threshold */
++	config3_val.bits32 = 0;
++	config3_val.bits.set_threshold = PAUSE_SET_HW_FREEQ;
++	config3_val.bits.rel_threshold = PAUSE_REL_HW_FREEQ;
++	gmac_write_reg(tp->base_addr, GMAC_CONFIG3, config3_val.bits32,0xffffffff);
++	#endif
++	/* set_mcast_filter mask*/
++	//	gmac_write_reg(tp->base_addr,GMAC_MCAST_FIL0,0x0,0xffffffff);
++	//  gmac_write_reg(tp->base_addr,GMAC_MCAST_FIL1,0x0,0xffffffff);
++
++	/* disable TX/RX and disable internal loop back */
++	config0.bits32 = 0;
++	config0_mask.bits32 = 0;
++
++	//debug_Aaron
++#ifdef	L2_jumbo_frame
++	config0.bits.max_len = 5;
++#else
++	config0.bits.max_len = 2;
++#endif
++
++	if (tp->flow_control_enable==1)
++	{
++		config0.bits.tx_fc_en = 1; /* enable tx flow control */
++		config0.bits.rx_fc_en = 1; /* enable rx flow control */
++		printk("Enable MAC Flow Control...\n");
++	}
++	else
++	{
++		config0.bits.tx_fc_en = 0; /* disable tx flow control */
++		config0.bits.rx_fc_en = 0; /* disable rx flow control */
++		printk("Disable MAC Flow Control...\n");
++	}
++	config0.bits.dis_rx = 1;  /* disable rx */
++	config0.bits.dis_tx = 1;  /* disable tx */
++	config0.bits.loop_back = 0; /* enable/disable GMAC loopback */
++	config0.bits.rx_err_detect = 1;
++	config0.bits.rgmii_en = 0;
++	config0.bits.rgmm_edge = 1;
++	config0.bits.rxc_inv = 0;
++	config0.bits.ipv4_rx_chksum = 1;  /* enable H/W to check ip checksum */
++	config0.bits.ipv6_rx_chksum = 1;  /* enable H/W to check ip checksum */
++	config0.bits.port0_chk_hwq = 1;	// GaryChen 3/24/2006 2:26PM
++	config0.bits.port1_chk_hwq = 1;	// GaryChen 3/24/2006 2:26PM
++	config0.bits.port0_chk_toeq = 1;
++	config0.bits.port1_chk_toeq = 1;
++	config0.bits.port0_chk_classq = 1;
++	config0.bits.port1_chk_classq = 1;
++
++	config0_mask.bits.max_len = 7;
++	config0_mask.bits.tx_fc_en = 1;
++	config0_mask.bits.rx_fc_en = 1;
++	config0_mask.bits.dis_rx = 1;
++	config0_mask.bits.dis_tx = 1;
++	config0_mask.bits.loop_back = 1;
++	config0_mask.bits.rgmii_en = 1;
++	config0_mask.bits.rgmm_edge = 1;
++	config0_mask.bits.rxc_inv = 1;
++	config0_mask.bits.ipv4_rx_chksum = 1;
++	config0_mask.bits.ipv6_rx_chksum = 1;
++	config0_mask.bits.port0_chk_hwq = 1;
++	config0_mask.bits.port1_chk_hwq = 1;
++	config0_mask.bits.port0_chk_toeq = 1;
++	config0_mask.bits.port1_chk_toeq = 1;
++	config0_mask.bits.port0_chk_classq = 1;
++	config0_mask.bits.port1_chk_classq = 1;
++	config0_mask.bits.rx_err_detect = 1;
++
++	#if 0
++	config0.bits.dis_rx = 1;  /* disable rx */
++	config0.bits.dis_tx = 1;  /* disable tx */
++	config0.bits.loop_back = 0; /* enable/disable GMAC loopback */
++	config0.bits.txc_inv = 0;
++	config0.bits.rgmii_en = 0;
++	config0.bits.rgmm_edge = 1;
++	config0.bits.rxc_inv = 1;
++	config0.bits.ipv4_tss_rx_en = 1;  /* enable H/W to check ip checksum */
++	config0.bits.ipv6_tss_rx_en = 1;  /* enable H/W to check ip checksum */
++
++	config0_mask.bits.max_len = 3;
++	config0_mask.bits.tx_fc_en = 1;
++	config0_mask.bits.rx_fc_en = 1;
++	config0_mask.bits.dis_rx = 1;
++	config0_mask.bits.dis_tx = 1;
++	config0_mask.bits.loop_back = 1;
++	config0_mask.bits.rgmii_en = 1;
++	config0_mask.bits.rgmm_edge = 1;
++	config0_mask.bits.txc_inv = 1;
++	config0_mask.bits.rxc_inv = 1;
++	config0_mask.bits.ipv4_tss_rx_en = 1;
++	config0_mask.bits.ipv6_tss_rx_en = 1;
++	#endif
++
++	gmac_write_reg(tp->base_addr, GMAC_CONFIG0, config0.bits32,config0_mask.bits32);
++
++	#if 1
++	hw_weigh.bits32 = 0;
++	hw_weigh.bits.hw_tq3 = 1;
++	hw_weigh.bits.hw_tq2 = 1;
++	hw_weigh.bits.hw_tq1 = 1;
++	hw_weigh.bits.hw_tq0 = 1;
++	gmac_write_reg(tp->dma_base_addr, GMAC_TX_WEIGHTING_CTRL_0_REG, hw_weigh.bits32, 0xffffffff);
++
++	sw_weigh.bits32 = 0;
++	sw_weigh.bits.sw_tq5 = 1;
++	sw_weigh.bits.sw_tq4 = 1;
++	sw_weigh.bits.sw_tq3 = 1;
++	sw_weigh.bits.sw_tq2 = 1;
++	sw_weigh.bits.sw_tq1 = 1;
++	sw_weigh.bits.sw_tq0 = 1;
++	gmac_write_reg(tp->dma_base_addr, GMAC_TX_WEIGHTING_CTRL_1_REG, sw_weigh.bits32, 0xffffffff);
++	#endif
++
++	#if 0
++	ahb_weight.bits32 = 0;
++	ahb_weight_mask.bits32 = 0;
++	ahb_weight.bits.rx_weight = 1;
++	ahb_weight.bits.tx_weight = 1;
++	ahb_weight.bits.hash_weight = 1;
++	ahb_weight.bits.pre_req = 0x1f;
++	ahb_weight.bits.tqDV_threshold = 0;
++	ahb_weight_mask.bits.rx_weight = 0x1f;
++	ahb_weight_mask.bits.tx_weight = 0x1f;
++	ahb_weight_mask.bits.hash_weight = 0x1f;
++	ahb_weight_mask.bits.pre_req = 0x1f;
++	ahb_weight_mask.bits.tqDV_threshold = 0x1f;
++	gmac_write_reg(tp->dma_base_addr, GMAC_AHB_WEIGHT_REG, ahb_weight.bits32, ahb_weight_mask.bits32);
++	#endif
++
++	#if defined(CONFIG_SL351x_NAT) || defined(CONFIG_SL351x_RXTOE)
++	gmac_write_reg(tp->dma_base_addr, GMAC_SPR0, IPPROTO_TCP, 0xffffffff);
++	#endif
++	#ifdef CONFIG_SL351x_NAT
++	gmac_write_reg(tp->dma_base_addr, GMAC_SPR1, IPPROTO_UDP, 0xffffffff);
++	gmac_write_reg(tp->dma_base_addr, GMAC_SPR2, IPPROTO_GRE, 0xffffffff);
++	gmac_write_reg(tp->dma_base_addr, GMAC_SPR3, 0xff, 0xffffffff);
++	gmac_write_reg(tp->dma_base_addr, GMAC_SPR4, 0xff, 0xffffffff);
++	gmac_write_reg(tp->dma_base_addr, GMAC_SPR5, 0xff, 0xffffffff);
++	gmac_write_reg(tp->dma_base_addr, GMAC_SPR6, 0xff, 0xffffffff);
++	gmac_write_reg(tp->dma_base_addr, GMAC_SPR7, 0xff, 0xffffffff);
++
++	sl351x_nat_init();
++	#endif
++
++	#ifdef CONFIG_SL351x_RXTOE
++	/* setup matching rule to TOE */
++	sl351x_toe_init();
++	#endif
++
++	// for A1 ASIC version
++//	hash_ctrl.bits32 = 0;
++//	hash_ctrl.bits.timing = 6;
++//	gmac_write_reg(tp->dma_base_addr, GMAC_HASH_ENGINE_REG0, hash_ctrl.bits32, 0xffffffff);
++
++	return (0);
++}
++
++/*----------------------------------------------------------------------
++*	toe_gmac_enable_tx_rx
++*----------------------------------------------------------------------*/
++static void toe_gmac_enable_tx_rx(struct net_device *dev)
++{
++	GMAC_INFO_T		*tp = dev->priv;
++	GMAC_CONFIG0_T	config0,config0_mask;
++
++    /* enable TX/RX */
++    config0.bits32 = 0;
++    config0_mask.bits32 = 0;
++    config0.bits.dis_rx = 0;  /* enable rx */
++    config0.bits.dis_tx = 0;  /* enable tx */
++    config0_mask.bits.dis_rx = 1;
++    config0_mask.bits.dis_tx = 1;
++    gmac_write_reg(tp->base_addr, GMAC_CONFIG0, config0.bits32,config0_mask.bits32);
++}
++/*----------------------------------------------------------------------
++*	toe_gmac_disable_rx
++*----------------------------------------------------------------------*/
++#if 0
++static void toe_gmac_disable_rx(struct net_device *dev)
++{
++	GMAC_INFO_T		*tp = dev->priv;
++	GMAC_CONFIG0_T	config0,config0_mask;
++
++    /* enable TX/RX */
++    config0.bits32 = 0;
++    config0_mask.bits32 = 0;
++    config0.bits.dis_rx = 1;  /* disable rx */
++//    config0.bits.dis_tx = 1;  /* disable tx */
++    config0_mask.bits.dis_rx = 1;
++//     config0_mask.bits.dis_tx = 1;
++    gmac_write_reg(tp->base_addr, GMAC_CONFIG0, config0.bits32,config0_mask.bits32);
++}
++#endif
++/*----------------------------------------------------------------------
++*	toe_gmac_enable_rx
++*----------------------------------------------------------------------*/
++#if 0
++static void toe_gmac_enable_rx(struct net_device *dev)
++{
++	GMAC_INFO_T		*tp = dev->priv;
++	GMAC_CONFIG0_T	config0,config0_mask;
++
++    /* enable TX/RX */
++    config0.bits32 = 0;
++    config0_mask.bits32 = 0;
++    config0.bits.dis_rx = 0;  /* enable rx */
++//    config0.bits.dis_tx = 0;  /* enable tx */
++    config0_mask.bits.dis_rx = 1;
++//    config0_mask.bits.dis_tx = 1;
++    gmac_write_reg(tp->base_addr, GMAC_CONFIG0, config0.bits32,config0_mask.bits32);
++}
++#endif
++/*----------------------------------------------------------------------
++*	toe_gmac_disable_tx_rx
++*----------------------------------------------------------------------*/
++static void toe_gmac_disable_tx_rx(struct net_device *dev)
++{
++	GMAC_INFO_T		*tp = dev->priv;
++	GMAC_CONFIG0_T	config0,config0_mask;
++
++    /* enable TX/RX */
++    config0.bits32 = 0;
++    config0_mask.bits32 = 0;
++    config0.bits.dis_rx = 1;  /* disable rx */
++    config0.bits.dis_tx = 1;  /* disable tx */
++    config0_mask.bits.dis_rx = 1;
++    config0_mask.bits.dis_tx = 1;
++    gmac_write_reg(tp->base_addr, GMAC_CONFIG0, config0.bits32,config0_mask.bits32);
++}
++
++/*----------------------------------------------------------------------
++*	toe_gmac_hw_start
++*----------------------------------------------------------------------*/
++static void toe_gmac_hw_start(struct net_device *dev)
++{
++	GMAC_INFO_T				*tp = (GMAC_INFO_T *)dev->priv;
++	GMAC_DMA_CTRL_T			dma_ctrl, dma_ctrl_mask;
++
++
++    /* program dma control register */
++	dma_ctrl.bits32 = 0;
++	dma_ctrl.bits.rd_enable = 1;
++	dma_ctrl.bits.td_enable = 1;
++	dma_ctrl.bits.loopback = 0;
++	dma_ctrl.bits.drop_small_ack = 0;
++	dma_ctrl.bits.rd_prot = 0;
++	dma_ctrl.bits.rd_burst_size = 3;
++	dma_ctrl.bits.rd_insert_bytes = RX_INSERT_BYTES;
++	dma_ctrl.bits.rd_bus = 3;
++	dma_ctrl.bits.td_prot = 0;
++	dma_ctrl.bits.td_burst_size = 3;
++	dma_ctrl.bits.td_bus = 3;
++
++	dma_ctrl_mask.bits32 = 0;
++	dma_ctrl_mask.bits.rd_enable = 1;
++	dma_ctrl_mask.bits.td_enable = 1;
++	dma_ctrl_mask.bits.loopback = 1;
++	dma_ctrl_mask.bits.drop_small_ack = 1;
++	dma_ctrl_mask.bits.rd_prot = 3;
++	dma_ctrl_mask.bits.rd_burst_size = 3;
++	dma_ctrl_mask.bits.rd_insert_bytes = 3;
++	dma_ctrl_mask.bits.rd_bus = 3;
++	dma_ctrl_mask.bits.td_prot = 0x0f;
++	dma_ctrl_mask.bits.td_burst_size = 3;
++	dma_ctrl_mask.bits.td_bus = 3;
++
++	gmac_write_reg(tp->dma_base_addr, GMAC_DMA_CTRL_REG, dma_ctrl.bits32, dma_ctrl_mask.bits32);
++
++    return;
++}
++
++/*----------------------------------------------------------------------
++*	toe_gmac_hw_stop
++*----------------------------------------------------------------------*/
++static void toe_gmac_hw_stop(struct net_device *dev)
++{
++	GMAC_INFO_T			*tp = (GMAC_INFO_T *)dev->priv;
++	GMAC_DMA_CTRL_T		dma_ctrl, dma_ctrl_mask;
++
++    /* program dma control register */
++	dma_ctrl.bits32 = 0;
++	dma_ctrl.bits.rd_enable = 0;
++	dma_ctrl.bits.td_enable = 0;
++
++	dma_ctrl_mask.bits32 = 0;
++	dma_ctrl_mask.bits.rd_enable = 1;
++	dma_ctrl_mask.bits.td_enable = 1;
++
++	gmac_write_reg(tp->dma_base_addr, GMAC_DMA_CTRL_REG, dma_ctrl.bits32, dma_ctrl_mask.bits32);
++}
++
++/*----------------------------------------------------------------------
++*	toe_gmac_clear_counter
++*----------------------------------------------------------------------*/
++static int toe_gmac_clear_counter (struct net_device *dev)
++{
++	GMAC_INFO_T	*tp = (GMAC_INFO_T *)dev->priv;
++
++    /* clear counter */
++    gmac_read_reg(tp->base_addr, GMAC_IN_DISCARDS);
++    gmac_read_reg(tp->base_addr, GMAC_IN_ERRORS);
++    gmac_read_reg(tp->base_addr, GMAC_IN_MCAST);
++    gmac_read_reg(tp->base_addr, GMAC_IN_BCAST);
++    gmac_read_reg(tp->base_addr, GMAC_IN_MAC1);
++    gmac_read_reg(tp->base_addr, GMAC_IN_MAC2);
++		tp->ifStatics.tx_bytes = 0;
++		tp->ifStatics.tx_packets = 0;
++		tp->ifStatics.tx_errors = 0;
++		tp->ifStatics.rx_bytes = 0;
++		tp->ifStatics.rx_packets = 0;
++		tp->ifStatics.rx_errors = 0;
++		tp->ifStatics.rx_dropped = 0;
++	return (0);
++}
++
++
++/*----------------------------------------------------------------------
++*	toe_gmac_tx_complete
++*----------------------------------------------------------------------*/
++static  void toe_gmac_tx_complete(GMAC_INFO_T *tp, unsigned int tx_qid,
++   										struct net_device *dev, int interrupt)
++{
++	volatile GMAC_TXDESC_T	*curr_desc;
++	GMAC_TXDESC_0_T			word0;
++	GMAC_TXDESC_1_T			word1;
++	unsigned int			desc_count;
++//	struct net_device_stats *isPtr = (struct net_device_stats *)&tp->ifStatics;
++	GMAC_SWTXQ_T			*swtxq;
++	DMA_RWPTR_T				rwptr;
++
++	/* get tx H/W completed descriptor virtual address */
++	/* check tx status and accumulate tx statistics */
++	swtxq = &tp->swtxq[tx_qid];
++	swtxq->intr_cnt++;
++	for (;;)
++	{
++		rwptr.bits32 = readl(swtxq->rwptr_reg);
++		if (rwptr.bits.rptr == swtxq->finished_idx)
++			break;
++    	curr_desc = (volatile GMAC_TXDESC_T *)swtxq->desc_base + swtxq->finished_idx;
++//   		consistent_sync((void *)curr_desc, sizeof(GMAC_TXDESC_T), PCI_DMA_FROMDEVICE);
++		word0.bits32 = curr_desc->word0.bits32;
++		word1.bits32 = curr_desc->word1.bits32;
++
++		if (word0.bits.status_tx_ok)
++		{
++			tp->ifStatics.tx_bytes += word1.bits.byte_count;
++			desc_count = word0.bits.desc_count;
++			if (desc_count==0)
++			{
++				printk("%s::Desc 0x%x = 0x%x, desc_count=%d\n",__func__, (u32)curr_desc, word0.bits32, desc_count);
++				while(1);
++			}
++			while (--desc_count)
++			{
++				word0.bits.status_tx_ok = 0;
++				curr_desc->word0.bits32 = word0.bits32;
++				swtxq->finished_idx = RWPTR_ADVANCE_ONE(swtxq->finished_idx, swtxq->total_desc_num);
++				curr_desc = (GMAC_TXDESC_T *)swtxq->desc_base + swtxq->finished_idx;
++				word0.bits32 = curr_desc->word0.bits32;
++#ifdef _DUMP_TX_TCP_CONTENT
++				if (curr_desc->word0.bits.buffer_size < 16)
++				{
++					int a;
++					char *datap;
++					printk("\t Tx Finished Desc 0x%x Len %d Addr 0x%08x: ", (u32)curr_desc, curr_desc->word0.bits.buffer_size, curr_desc->word2.buf_adr);
++					datap = (char *)__va(curr_desc->word2.buf_adr);
++					for (a=0; a<8 && aword0.bits.buffer_size; a++, datap++)
++					{
++						printk("0x%02x ", *datap);
++					}
++					printk("\n");
++				}
++#endif
++			}
++
++			word0.bits.status_tx_ok = 0;
++			if (swtxq->tx_skb[swtxq->finished_idx])
++			{
++				if (interrupt)
++					dev_kfree_skb_irq(swtxq->tx_skb[swtxq->finished_idx]);
++				else
++					dev_kfree_skb(swtxq->tx_skb[swtxq->finished_idx]);
++				swtxq->tx_skb[swtxq->finished_idx] = NULL;
++			}
++			curr_desc->word0.bits32 = word0.bits32;
++  			swtxq->curr_finished_desc = (GMAC_TXDESC_T *)curr_desc;
++ 			swtxq->total_finished++;
++  			tp->ifStatics.tx_packets++;
++			swtxq->finished_idx = RWPTR_ADVANCE_ONE(swtxq->finished_idx, swtxq->total_desc_num);
++		}
++		else
++		{
++			// tp->ifStatics.tx_errors++;
++			// printk("%s::Tx Descriptor is !!!\n",__func__);
++			// wait ready by breaking
++			break;
++		}
++	}
++
++	if (netif_queue_stopped(dev))
++	{
++		netif_wake_queue(dev);
++	}
++}
++
++/*----------------------------------------------------------------------
++*	gmac_start_xmit
++*----------------------------------------------------------------------*/
++static int gmac_start_xmit(struct sk_buff *skb, struct net_device *dev)
++{
++	GMAC_INFO_T 			*tp= dev->priv;
++//	static unsigned int     pcount = 0;
++//	unsigned int			tx_qid;
++    DMA_RWPTR_T				rwptr;
++	volatile GMAC_TXDESC_T	*curr_desc;
++	int 					snd_pages = skb_shinfo(skb)->nr_frags + 1;  /* get number of descriptor */
++	int 					frag_id = 0;
++	int 					len, total_len = skb->len;
++	struct net_device_stats *isPtr;
++	unsigned int			free_desc;
++	GMAC_SWTXQ_T			*swtxq;
++	register unsigned long	word0, word1, word2, word3;
++	unsigned short			wptr, rptr;
++#ifdef	L2_jumbo_frame
++	int header_len = skb->len;
++	struct iphdr	*ip_hdr;
++    struct tcphdr	*tcp_hdr;
++    int             tcp_hdr_len;
++    unsigned char 	*ptr;
++    int             data_len,a;
++    unsigned int    val;
++#endif
++
++#ifdef GMAC_LEN_1_2_ISSUE
++	int						total_pages;
++	total_pages = snd_pages;
++#endif
++
++	isPtr = (struct net_device_stats *)&tp->ifStatics;
++#if 1
++	if (skb->len >= 0x10000)
++	{
++//		spin_unlock(&tp->tx_mutex);
++		isPtr->tx_dropped++;
++		printk("%s::[GMAC %d] skb->len %d >= 64K\n", __func__, tp->port_id, skb->len);
++		netif_stop_queue(dev);
++		return 1;
++    }
++#endif
++
++#if 0
++	if (storlink_ctl.recvfile==2)
++	{
++	    printk("snd_pages=%d skb->len=%d\n",snd_pages,skb->len);
++	}
++#endif
++
++#ifdef GMAC_USE_TXQ0
++	#define tx_qid 	0
++#endif
++
++	swtxq = &tp->swtxq[tx_qid];
++
++//	spin_lock(&tp->tx_mutex);
++    rwptr.bits32 = readl(swtxq->rwptr_reg);
++	wptr = rwptr.bits.wptr;
++	rptr = rwptr.bits.rptr;
++
++	// check finished desc or empty BD
++	// cannot check by read ptr of RW PTR register,
++	// because the HW complete to send but the SW may NOT handle it
++#ifndef	GMAX_TX_INTR_DISABLED
++	if (wptr >= swtxq->finished_idx)
++		free_desc = swtxq->total_desc_num - wptr - 1 + swtxq->finished_idx;
++	else
++		free_desc = swtxq->finished_idx - wptr - 1;
++
++	if (free_desc < snd_pages)
++	{
++//		spin_unlock(&tp->tx_mutex);
++		isPtr->tx_dropped++;
++//		printk("GMAC %d No available descriptor!\n", tp->port_id);
++		netif_stop_queue(dev);
++		return 1;
++    }
++#else
++	toe_gmac_tx_complete(tp, tx_qid, dev, 0);
++
++	if (wptr >= swtxq->finished_idx)
++		free_desc = swtxq->total_desc_num - wptr - 1 + swtxq->finished_idx;
++	else
++		free_desc = swtxq->finished_idx - wptr - 1;
++	if (free_desc < snd_pages)
++	{
++//		spin_unlock(&tp->tx_mutex);
++		isPtr->tx_dropped++;
++//		printk("GMAC %d No available descriptor!\n", tp->port_id);
++		netif_stop_queue(dev);
++		return 1;
++    }
++
++#if 0
++	printk("1: free_desc=%d, wptr=%d, finished_idx=%d\n", free_desc, wptr, swtxq->finished_idx);
++	if ((free_desc < (snd_pages << 2)) ||
++	    (free_desc < (swtxq->total_desc_num >> 2)))
++	{
++		printk("2: free_desc = %d\n", free_desc);
++		toe_gmac_tx_complete(tp, tx_qid, dev, 0);
++		rwptr.bits32 = readl(swtxq->rwptr_reg);
++		wptr = rwptr.bits.wptr;
++		if (wptr>= swtxq->finished_idx)
++			free_desc = swtxq->total_desc_num - wptr -1 + swtxq->finished_idx;
++		else
++			free_desc = swtxq->finished_idx - wptr - 1;
++	}
++#endif
++#endif
++
++#ifdef	L2_jumbo_frame
++//		data_len = skb->len - 14 - ip_hdr->ihl *4 - tcp_hdr_len;
++//		if ((skb->nh.iph->protocol == __constant_htons(ETH_P_IP)) && ((skb->nh.iph->protocol & 0x00ff)  == IPPROTO_TCP))
++//		if (skb->nh.iph->protocol == 0x006 && (skb->nh.iph->protocol == __constant_htons(ETH_P_IP)))
++		if (((skb->nh.iph->protocol & 0x00ff)  == IPPROTO_TCP))
++		{
++				ip_hdr = (struct iphdr*)(skb->nh.iph);
++				tcp_hdr = (struct tcphdr*)(skb->h.th);
++				tcp_hdr_len = TCPHDRLEN(tcp_hdr) * 4;
++				tcp_hdr_len = TCPHDRLEN(tcp_hdr) * 4;
++
++				if ((skb->h.th->syn) && (tcp_hdr_len > 20))
++				{
++					ptr = (unsigned char *)(tcp_hdr+1);
++					if ((ptr[0] == 0x02) && (ptr[1] == 0x04) && (ptr[2] == 0x07) && (ptr[3] == 0xba)) // 0x07 aa=2016-54=1962  ,0x07ba=2032-54=1978
++					{
++						ptr[2]=0x20;	//23
++						ptr[3]=0x00;   	//00
++						printk("-----> Change MSS to 8K \n" );
++					}
++				}
++		}
++//		if ((ip_hdr->protocol & 0x00ff) != IPPROTO_TCP)
++//		if ((tcp_hdr_len > 20) && (skb->h.th->syn))
++#endif
++
++
++#if 0
++	if (snd_pages > 1)
++		printk("-----> snd_pages=%d\n", snd_pages);
++	if (total_len > 1514)
++	{
++		printk("-----> total_len=%d\n", total_len);
++	}
++#endif
++
++    while (snd_pages)
++    {
++    	char *pkt_datap;
++
++    	curr_desc = (GMAC_TXDESC_T *)swtxq->desc_base + wptr;
++//		consistent_sync((void *)curr_desc, sizeof(GMAC_TXDESC_T), PCI_DMA_FROMDEVICE);
++#if 0
++//#if (GMAC_DEBUG==1)
++    	// if curr_desc->word2.buf_adr !=0 means that the ISR does NOT handle it
++    	// if (curr_desc->word2.buf_adr)
++    	if (swtxq->tx_skb[wptr])
++    	{
++    		printk("Error! Stop due to TX descriptor's buffer is not freed!\n");
++    		while(1);
++    		dev_kfree_skb(swtxq->tx_skb[wptr]);
++    		swtxq->tx_skb[wptr] = NULL;
++		}
++#endif
++
++		if (frag_id == 0)
++		{
++#if 0
++			int i;
++			pkt_datap = skb->data;
++			len = total_len;
++			for (i=0; inr_frags; i++)
++			{
++				skb_frag_t* frag = &skb_shinfo(skb)->frags[i];
++				len -= frag->size;
++			}
++#else
++			pkt_datap = skb->data;
++			len = total_len - skb->data_len;
++#endif
++		}
++		else
++		{
++			skb_frag_t* frag = &skb_shinfo(skb)->frags[frag_id-1];
++			pkt_datap = page_address(frag->page) + frag->page_offset;
++			len = frag->size;
++			if (len > total_len)
++			{
++				printk("===> Fatal Error! Send Frag size %d > Total Size %d!!!!!\n",
++					len, total_len);
++			}
++		}
++
++		/* set TX descriptor */
++		/* copy packet to descriptor buffer address */
++		// curr_desc->word0.bits32 = len;    /* total frame byte count */
++		word0 = len;
++#ifdef	L2_jumbo_frame
++		word3 = (dev->mtu+14) | EOFIE_BIT;  //2016 ,2032
++#else
++		word3 = 1514 | EOFIE_BIT;
++#endif
++
++#ifdef DO_HW_CHKSUM
++#ifdef	L2_jumbo_frame
++		if (total_len >= (dev->mtu+14) && (skb->nh.iph->protocol == 0x011) && skb->nh.iph && (skb->nh.iph->frag_off & __constant_htons(0x3fff)))
++#else
++		if (total_len <= 1514 && ip_hdr(skb) && (ip_hdr(skb)->frag_off & __constant_htons(0x3fff)))
++#endif
++			word1  = total_len |
++					TSS_IP_CHKSUM_BIT  |
++					TSS_IPV6_ENABLE_BIT |
++					TSS_MTU_ENABLE_BIT;
++		else
++			word1 = total_len |
++					TSS_UDP_CHKSUM_BIT |
++					TSS_TCP_CHKSUM_BIT |
++					TSS_IP_CHKSUM_BIT  |
++					TSS_IPV6_ENABLE_BIT |
++					TSS_MTU_ENABLE_BIT;
++#else
++		word1 = total_len | TSS_MTU_ENABLE_BIT;
++#endif
++		word2 = (unsigned long)__pa(pkt_datap);
++
++		if (frag_id == 0)
++		{
++			word3 |= SOF_BIT;	// SOF
++		}
++
++		if (snd_pages == 1)
++		{
++			word3 |= EOF_BIT;	// EOF
++			swtxq->tx_skb[wptr] = skb;
++#ifdef CONFIG_SL351x_NAT
++			if (nat_cfg.enabled && sl351x_nat_output(skb, tp->port_id))
++				word1 |= TSS_IP_FIXED_LEN_BIT;
++#endif
++		}
++		else
++			swtxq->tx_skb[wptr] = NULL;
++		// word1 |= TSS_IP_FIXED_LEN_BIT;
++#if 1
++#ifdef CONFIG_SL351x_RXTOE
++		// check if this frame has the mission to enable toe hash entry..
++		// if rx_max_pktsize ==0, do not enable RXTOE
++		if (TCP_SKB_CB(skb)->connection && storlink_ctl.rx_max_pktsize) {
++			set_toeq_hdr(TCP_SKB_CB(skb)->connection, &toe_private_data, dev);
++		}
++#endif
++#endif
++#ifdef _DUMP_TX_TCP_CONTENT
++		if (len < 16 && frag_id && skb->h.th && (skb->h.th->source == __constant_htons(445) || skb->h.th->source == __constant_htons(139)))
++		{
++			int a;
++			char *datap;
++			printk("Tx Desc 0x%x Frag %d Len %d [IP-ID 0x%x] 0x%08x: ", (u32)curr_desc, frag_id, len, htons(skb->nh.iph->id), (u32)pkt_datap);
++			datap = (char *)pkt_datap;
++			for (a=0; a<8 && a= _DEBUG_PREFETCH_NUM)
++				_debug_prefetch_cnt = 0;
++		}
++#endif
++
++		consistent_sync((void *)pkt_datap, len, PCI_DMA_TODEVICE);
++		wmb();
++		curr_desc->word0.bits32 = word0;
++		curr_desc->word1.bits32 = word1;
++		curr_desc->word2.bits32 = word2;
++		curr_desc->word3.bits32 = word3;
++		swtxq->curr_tx_desc = (GMAC_TXDESC_T *)curr_desc;
++//		consistent_sync((void *)curr_desc, sizeof(GMAC_TXDESC_T), PCI_DMA_TODEVICE);
++#ifdef _DUMP_TX_TCP_CONTENT
++		if (len < 16 && frag_id && skb->h.th && (skb->h.th->source == __constant_htons(445) || skb->h.th->source == __constant_htons(139)))
++		{
++			int a;
++			char *datap;
++			printk("\t 0x%08x: ", (u32)pkt_datap);
++			datap = (char *)pkt_datap;
++			for (a=0; a<8 && atotal_desc_num);
++		frag_id++;
++		snd_pages--;
++	}
++
++    swtxq->total_sent++;
++	SET_WPTR(swtxq->rwptr_reg, wptr);
++	dev->trans_start = jiffies;
++
++
++	// printk("MAC %d Qid %d rwptr = 0x%x, curr_desc=0x%x\n", skb->tx_port_id, tx_qid, rwptr.bits32, curr_desc);
++//#ifdef	GMAX_TX_INTR_DISABLED
++//		toe_gmac_tx_complete(tp, tx_qid, dev, 0);
++//#endif
++	return (0);
++}
++
++/*----------------------------------------------------------------------
++* gmac_set_mac_address
++*----------------------------------------------------------------------*/
++
++static int gmac_set_mac_address(struct net_device *dev, void *addr)
++{
++	GMAC_INFO_T		*tp= dev->priv;
++	struct sockaddr *sock;
++	unsigned int    reg_val;
++    unsigned int    i;
++
++	sock = (struct sockaddr *) addr;
++	for (i = 0; i < 6; i++)
++	{
++		dev->dev_addr[i] = sock->sa_data[i];
++	}
++
++    reg_val = dev->dev_addr[0] + (dev->dev_addr[1]<<8) + (dev->dev_addr[2]<<16) + (dev->dev_addr[3]<<24);
++    gmac_write_reg(tp->base_addr,GMAC_STA_ADD0,reg_val,0xffffffff);
++    reg_val = dev->dev_addr[4] + (dev->dev_addr[5]<<8);
++    gmac_write_reg(tp->base_addr,GMAC_STA_ADD1,reg_val,0x0000ffff);
++	memcpy(ð_mac[tp->port_id][0],&dev->dev_addr[0],6);
++
++    printk("Storlink %s address = ",dev->name);
++    printk("%02x",dev->dev_addr[0]);
++    printk("%02x",dev->dev_addr[1]);
++    printk("%02x",dev->dev_addr[2]);
++    printk("%02x",dev->dev_addr[3]);
++    printk("%02x",dev->dev_addr[4]);
++    printk("%02x\n",dev->dev_addr[5]);
++
++    return (0);
++}
++
++/*----------------------------------------------------------------------
++* gmac_get_mac_address
++*	get mac address from FLASH
++*----------------------------------------------------------------------*/
++static void gmac_get_mac_address(void)
++{
++#ifdef CONFIG_MTD
++	extern int get_vlaninfo(vlaninfo* vlan);
++    static vlaninfo    vlan[2];
++
++    if (get_vlaninfo(&vlan[0]))
++    {
++        memcpy((void *)ð_mac[0][0],vlan[0].mac,6);
++        // VLAN_conf[0].vid = vlan[0].vlanid;
++        // VLAN_conf[0].portmap = vlan[0].vlanmap;
++        memcpy((void *)ð_mac[1][0],vlan[1].mac,6);
++        // VLAN_conf[1].vid = vlan[1].vlanid;
++        // VLAN_conf[1].portmap = vlan[1].vlanmap;
++    }
++#else
++    unsigned int reg_val;
++
++    reg_val = readl(IO_ADDRESS(TOE_GMAC0_BASE)+0xac);
++    eth_mac[0][4] = (reg_val & 0xff00) >> 8;
++    eth_mac[0][5] = reg_val & 0x00ff;
++    reg_val = readl(IO_ADDRESS(SL2312_SECURITY_BASE)+0xac);
++    eth_mac[1][4] = (reg_val & 0xff00) >> 8;
++    eth_mac[1][5] = reg_val & 0x00ff;
++#endif
++    return;
++}
++
++
++/*----------------------------------------------------------------------
++* mac_stop_txdma
++*----------------------------------------------------------------------*/
++void mac_stop_txdma(struct net_device *dev)
++{
++	GMAC_INFO_T				*tp = (GMAC_INFO_T *)dev->priv;
++	GMAC_DMA_CTRL_T			dma_ctrl, dma_ctrl_mask;
++	GMAC_TXDMA_FIRST_DESC_T	txdma_busy;
++
++	// wait idle
++	do
++	{
++		txdma_busy.bits32 = gmac_read_reg(tp->dma_base_addr, GMAC_DMA_TX_FIRST_DESC_REG);
++	} while (txdma_busy.bits.td_busy);
++
++    /* program dma control register */
++	dma_ctrl.bits32 = 0;
++	dma_ctrl.bits.rd_enable = 0;
++	dma_ctrl.bits.td_enable = 0;
++
++	dma_ctrl_mask.bits32 = 0;
++	dma_ctrl_mask.bits.rd_enable = 1;
++	dma_ctrl_mask.bits.td_enable = 1;
++
++	gmac_write_reg(tp->dma_base_addr, GMAC_DMA_CTRL_REG, dma_ctrl.bits32, dma_ctrl_mask.bits32);
++}
++
++/*----------------------------------------------------------------------
++* mac_start_txdma
++*----------------------------------------------------------------------*/
++void mac_start_txdma(struct net_device *dev)
++{
++	GMAC_INFO_T			*tp = (GMAC_INFO_T *)dev->priv;
++	GMAC_DMA_CTRL_T		dma_ctrl, dma_ctrl_mask;
++
++    /* program dma control register */
++	dma_ctrl.bits32 = 0;
++	dma_ctrl.bits.rd_enable = 1;
++	dma_ctrl.bits.td_enable = 1;
++
++	dma_ctrl_mask.bits32 = 0;
++	dma_ctrl_mask.bits.rd_enable = 1;
++	dma_ctrl_mask.bits.td_enable = 1;
++
++	gmac_write_reg(tp->dma_base_addr, GMAC_DMA_CTRL_REG, dma_ctrl.bits32, dma_ctrl_mask.bits32);
++}
++
++
++/*----------------------------------------------------------------------
++* gmac_get_stats
++*----------------------------------------------------------------------*/
++
++struct net_device_stats * gmac_get_stats(struct net_device *dev)
++{
++    GMAC_INFO_T *tp = (GMAC_INFO_T *)dev->priv;
++    // unsigned int        flags;
++    unsigned int        pkt_drop;
++    unsigned int        pkt_error;
++
++    if (netif_running(dev))
++    {
++        /* read H/W counter */
++        // spin_lock_irqsave(&tp->lock,flags);
++        pkt_drop = gmac_read_reg(tp->base_addr,GMAC_IN_DISCARDS);
++        pkt_error = gmac_read_reg(tp->base_addr,GMAC_IN_ERRORS);
++        tp->ifStatics.rx_dropped = tp->ifStatics.rx_dropped + pkt_drop;
++        tp->ifStatics.rx_errors = tp->ifStatics.rx_errors + pkt_error;
++        // spin_unlock_irqrestore(&tp->lock,flags);
++    }
++    return &tp->ifStatics;
++}
++
++
++
++/*----------------------------------------------------------------------
++* mac_get_sw_tx_weight
++*----------------------------------------------------------------------*/
++void mac_get_sw_tx_weight(struct net_device *dev, char *weight)
++{
++	GMAC_TX_WCR1_T	sw_weigh;
++    GMAC_INFO_T		*tp = (GMAC_INFO_T *)dev->priv;
++
++	sw_weigh.bits32 = gmac_read_reg(tp->dma_base_addr, GMAC_TX_WEIGHTING_CTRL_1_REG);
++
++	weight[0] = sw_weigh.bits.sw_tq0;
++   	weight[1] = sw_weigh.bits.sw_tq1;
++   	weight[2] = sw_weigh.bits.sw_tq2;
++   	weight[3] = sw_weigh.bits.sw_tq3;
++   	weight[4] = sw_weigh.bits.sw_tq4;
++   	weight[5] = sw_weigh.bits.sw_tq5;
++}
++
++/*----------------------------------------------------------------------
++* mac_set_sw_tx_weight
++*----------------------------------------------------------------------*/
++void mac_set_sw_tx_weight(struct net_device *dev, char *weight)
++{
++	GMAC_TX_WCR1_T	sw_weigh;
++    GMAC_INFO_T		*tp = (GMAC_INFO_T *)dev->priv;
++
++	sw_weigh.bits32 = 0;
++	sw_weigh.bits.sw_tq0 = weight[0];
++   	sw_weigh.bits.sw_tq1 = weight[1];
++   	sw_weigh.bits.sw_tq2 = weight[2];
++   	sw_weigh.bits.sw_tq3 = weight[3];
++   	sw_weigh.bits.sw_tq4 = weight[4];
++   	sw_weigh.bits.sw_tq5 = weight[5];
++
++	gmac_write_reg(tp->dma_base_addr, GMAC_TX_WEIGHTING_CTRL_1_REG, sw_weigh.bits32, 0xffffffff);
++}
++
++/*----------------------------------------------------------------------
++* mac_get_hw_tx_weight
++*----------------------------------------------------------------------*/
++void mac_get_hw_tx_weight(struct net_device *dev, char *weight)
++{
++	GMAC_TX_WCR0_T	hw_weigh;
++    GMAC_INFO_T		*tp = (GMAC_INFO_T *)dev->priv;
++
++	hw_weigh.bits32 = gmac_read_reg(tp->dma_base_addr, GMAC_TX_WEIGHTING_CTRL_0_REG);
++
++	weight[0] = hw_weigh.bits.hw_tq0;
++   	weight[1] = hw_weigh.bits.hw_tq1;
++   	weight[2] = hw_weigh.bits.hw_tq2;
++   	weight[3] = hw_weigh.bits.hw_tq3;
++}
++
++/*----------------------------------------------------------------------
++* mac_set_hw_tx_weight
++*----------------------------------------------------------------------*/
++void mac_set_hw_tx_weight(struct net_device *dev, char *weight)
++{
++	GMAC_TX_WCR0_T	hw_weigh;
++    GMAC_INFO_T		*tp = (GMAC_INFO_T *)dev->priv;
++
++	hw_weigh.bits32 = 0;
++	hw_weigh.bits.hw_tq0 = weight[0];
++   	hw_weigh.bits.hw_tq1 = weight[1];
++   	hw_weigh.bits.hw_tq2 = weight[2];
++   	hw_weigh.bits.hw_tq3 = weight[3];
++
++	gmac_write_reg(tp->dma_base_addr, GMAC_TX_WEIGHTING_CTRL_0_REG, hw_weigh.bits32, 0xffffffff);
++}
++
++/*----------------------------------------------------------------------
++* mac_start_tx_dma
++*----------------------------------------------------------------------*/
++int mac_start_tx_dma(int mac)
++{
++	GMAC_DMA_CTRL_T dma_ctrl, dma_ctrl_mask;
++
++	dma_ctrl.bits32 = 0;
++	dma_ctrl.bits.td_enable = 1;
++
++	dma_ctrl_mask.bits32 = 0;
++	dma_ctrl_mask.bits.td_enable = 1;
++
++	if (mac == 0)
++    	gmac_write_reg(TOE_GMAC0_DMA_BASE, GMAC_DMA_CTRL_REG, dma_ctrl.bits32, dma_ctrl_mask.bits32);
++	else
++    	gmac_write_reg(TOE_GMAC1_DMA_BASE, GMAC_DMA_CTRL_REG, dma_ctrl.bits32, dma_ctrl_mask.bits32);
++	return	1;
++}
++
++/*----------------------------------------------------------------------
++* mac_stop_tx_dma
++*----------------------------------------------------------------------*/
++int mac_stop_tx_dma(int mac)
++{
++	GMAC_DMA_CTRL_T dma_ctrl, dma_ctrl_mask;
++
++	dma_ctrl.bits32 = 0;
++	dma_ctrl.bits.td_enable = 0;
++
++	dma_ctrl_mask.bits32 = 0;
++	dma_ctrl_mask.bits.td_enable = 1;
++
++	if (mac == 0)
++    	gmac_write_reg(TOE_GMAC0_DMA_BASE, GMAC_DMA_CTRL_REG, dma_ctrl.bits32, dma_ctrl_mask.bits32);
++	else
++    	gmac_write_reg(TOE_GMAC1_DMA_BASE, GMAC_DMA_CTRL_REG, dma_ctrl.bits32, dma_ctrl_mask.bits32);
++	return	1;
++}
++
++/*----------------------------------------------------------------------
++* mac_read_reg(int mac, unsigned int offset)
++*----------------------------------------------------------------------*/
++unsigned int mac_read_reg(int mac, unsigned int offset)
++{
++	switch (mac)
++	{
++		case 0:
++			return gmac_read_reg(TOE_GMAC0_BASE, offset);
++		case 1:
++			return gmac_read_reg(TOE_GMAC1_BASE, offset);
++		default:
++			return 0;
++	}
++}
++
++/*----------------------------------------------------------------------
++* mac_write_reg
++*----------------------------------------------------------------------*/
++void mac_write_reg(int mac, unsigned int offset, unsigned data)
++{
++	switch (mac)
++	{
++		case 0:
++			gmac_write_reg(GMAC0_BASE, offset, data, 0xffffffff);
++			break;
++		case 1:
++			gmac_write_reg(GMAC1_BASE, offset, data, 0xffffffff);
++			break;
++	}
++}
++
++/*----------------------------------------------------------------------
++* mac_read_dma_reg(int mac, unsigned int offset)
++*----------------------------------------------------------------------*/
++u32 mac_read_dma_reg(int mac, unsigned int offset)
++{
++	switch (mac)
++	{
++		case 0:
++			return gmac_read_reg(TOE_GMAC0_DMA_BASE, offset);
++		case 1:
++			return gmac_read_reg(TOE_GMAC1_DMA_BASE, offset);
++		default:
++			return 0;
++	}
++}
++
++/*----------------------------------------------------------------------
++* mac_write_dma_reg
++*----------------------------------------------------------------------*/
++void mac_write_dma_reg(int mac, unsigned int offset, u32 data)
++{
++	switch (mac)
++	{
++		case 0:
++			gmac_write_reg(TOE_GMAC0_DMA_BASE, offset, data, 0xffffffff);
++			break;
++		case 1:
++			gmac_write_reg(TOE_GMAC1_DMA_BASE, offset, data, 0xffffffff);
++			break;
++	}
++}
++
++/*----------------------------------------------------------------------
++* ether_crc
++*----------------------------------------------------------------------*/
++static unsigned const ethernet_polynomial = 0x04c11db7U;
++static unsigned int ether_crc (int length, unsigned char *data)
++{
++	int crc = -1;
++	unsigned int i;
++	unsigned int crc_val=0;
++
++	while (--length >= 0) {
++		unsigned char current_octet = *data++;
++		int bit;
++		for (bit = 0; bit < 8; bit++, current_octet >>= 1)
++			crc = (crc << 1) ^ ((crc < 0) ^ (current_octet & 1) ?
++			     ethernet_polynomial : 0);
++	}
++	crc = ~crc;
++	for (i=0;i<32;i++)
++	{
++		crc_val = crc_val + (((crc << i) & 0x80000000) >> (31-i));
++	}
++	return crc_val;
++}
++
++
++
++/*----------------------------------------------------------------------
++* mac_set_rx_mode
++*----------------------------------------------------------------------*/
++void mac_set_rx_mode(int pid, unsigned int data)
++{
++	unsigned int	base;
++
++	base = (pid == 0) ? GMAC0_BASE : GMAC1_BASE;
++
++    gmac_write_reg(base, GMAC_RX_FLTR, data, 0x0000001f);
++    return;
++}
++
++
++/*----------------------------------------------------------------------
++* gmac_open
++*----------------------------------------------------------------------*/
++
++static int gmac_open (struct net_device *dev)
++{
++	GMAC_INFO_T  *tp = (GMAC_INFO_T *)dev->priv;
++	int    					retval;
++	TOE_INFO_T				*toe;
++	toe = (TOE_INFO_T *)&toe_private_data;
++
++    /* hook ISR */
++	retval = request_irq (dev->irq, toe_gmac_interrupt, IRQF_DISABLED, dev->name, dev);
++	if (retval)
++		return retval;
++
++	toe_init_gmac(dev);
++
++	if(!FLAG_SWITCH)
++	{
++    	init_waitqueue_head (&tp->thr_wait);
++    	init_completion(&tp->thr_exited);
++
++    	tp->time_to_die = 0;
++    	tp->thr_pid = kernel_thread (gmac_phy_thread, dev, CLONE_FS | CLONE_FILES);
++    	if (tp->thr_pid < 0)
++    	{
++    		printk (KERN_WARNING "%s: unable to start kernel thread\n",dev->name);
++    	}
++    }
++
++	tp->operation = 1;
++
++   	netif_start_queue (dev);
++
++	return (0);
++}
++
++/*----------------------------------------------------------------------
++* gmac_close
++*----------------------------------------------------------------------*/
++static int gmac_close(struct net_device *dev)
++{
++    TOE_INFO_T			*toe;
++// 	GMAC_RXDESC_T		*sw_desc_ptr,*desc_ptr;
++// 	unsigned int		buf_ptr;
++	GMAC_INFO_T 	*tp = dev->priv;
++	unsigned int		ret;
++
++	toe = (TOE_INFO_T *)&toe_private_data;
++
++	tp->operation = 0;
++
++    netif_stop_queue(dev);
++    mdelay(20);
++
++    /* stop tx/rx packet */
++    toe_gmac_disable_tx_rx(dev);
++    mdelay(20);
++
++    /* stop the chip's Tx and Rx DMA processes */
++	toe_gmac_hw_stop(dev);
++
++	toe_gmac_disable_interrupt(tp->irq);
++
++    /* disable interrupts by clearing the interrupt mask */
++    synchronize_irq();
++    free_irq(dev->irq,dev);
++
++//	DMA_MFREE(sw_desc_ptr, (TOE_SW_FREEQ_DESC_NUM * sizeof(GMAC_RXDESC_T),(dma_addr_t *)&toe->sw_freeq_desc_base_dma);
++//	DMA_MFREE(desc_ptr, TOE_HW_FREEQ_DESC_NUM * sizeof(GMAC_RXDESC_T),(dma_addr_t *)&toe->hw_freeq_desc_base_dma);
++//	DMA_MFREE(buf_ptr, TOE_HW_FREEQ_DESC_NUM) * HW_RX_BUF_SIZE),(dma_addr_t *)&toe->hwfq_buf_base_dma);
++//	DMA_MFREE(toe->gmac[0].swtxq_desc_base , TOE_GMAC0_SWTXQ_DESC_NUM * TOE_SW_TXQ_NUM * sizeof(GMAC_TXDESC_T),(dma_addr_t *)&toe->gmac[0].swtxq_desc_base_dma);
++//	DMA_MFREE(toe->gmac[1].swtxq_desc_base , TOE_GMAC0_SWTXQ_DESC_NUM * TOE_SW_TXQ_NUM * sizeof(GMAC_TXDESC_T),(dma_addr_t *)&toe->gmac[1].swtxq_desc_base_dma);
++//	DMA_MFREE(toe->gmac[0].hwtxq_desc_base_dma , TOE_GMAC0_HWTXQ_DESC_NUM * TOE_HW_TXQ_NUM * sizeof(GMAC_TXDESC_T),(dma_addr_t *)&toe->gmac[0].hwtxq_desc_base_dma);
++//	DMA_MFREE(toe->gmac[1].hwtxq_desc_base_dma , TOE_GMAC0_SWTXQ_DESC_NUM * TOE_HW_TXQ_NUM * sizeof(GMAC_TXDESC_T),(dma_addr_t *)&toe->gmac[1].hwtxq_desc_base_dma);
++//	DMA_MFREE(toe->gmac[0].default_desc_base_dma ,TOE_DEFAULT_Q0_DESC_NUM * sizeof(GMAC_TXDESC_T),(dma_addr_t *)&toe->gmac[0].default_desc_base_dma);
++//	DMA_MFREE(toe->gmac[1].default_desc_base_dma , TOE_DEFAULT_Q0_DESC_NUM * sizeof(GMAC_TXDESC_T),(dma_addr_t *)&toe->gmac[1].default_desc_base_dma);
++//	DMA_MFREE(toe->intr_desc_base_dma , TOE_INTR_QUEUE_NUM * TOE_INTR_DESC_NUM * sizeof(GMAC_RXDESC_T),(dma_addr_t *)&toe->intr_desc_base_dma);
++//	DMA_MFREE(toe->intr_buf_base_dma , TOE_INTR_DESC_NUM * sizeof(TOE_QHDR_T),(dma_addr_t *)&toe->intr_buf_base_dma);
++
++	if(!FLAG_SWITCH)
++	{
++    	if (tp->thr_pid >= 0)
++    	{
++		    tp->time_to_die = 1;
++    		wmb();
++    		ret = kill_proc (tp->thr_pid, SIGTERM, 1);
++    		if (ret)
++    		{
++    			printk (KERN_ERR "%s: unable to signal thread\n", dev->name);
++    			return ret;
++    		}
++//    		wait_for_completion (&tp->thr_exited);
++    	}
++    }
++
++    return (0);
++}
++
++/*----------------------------------------------------------------------
++* toe_gmac_fill_free_q
++* allocate buffers for free queue.
++*----------------------------------------------------------------------*/
++static inline void toe_gmac_fill_free_q(void)
++{
++	struct sk_buff	*skb;
++	volatile DMA_RWPTR_T	fq_rwptr;
++	volatile GMAC_RXDESC_T	*fq_desc;
++	unsigned long	flags;
++	// unsigned short max_cnt=TOE_SW_FREEQ_DESC_NUM>>1;
++
++	fq_rwptr.bits32 = readl(TOE_GLOBAL_BASE + GLOBAL_SWFQ_RWPTR_REG);
++	spin_lock_irqsave(&gmac_fq_lock, flags);
++	//while ((max_cnt--) && (unsigned short)RWPTR_ADVANCE_ONE(fq_rwptr.bits.wptr,
++	//				TOE_SW_FREEQ_DESC_NUM) != fq_rwptr.bits.rptr) {
++	while ((unsigned short)RWPTR_ADVANCE_ONE(fq_rwptr.bits.wptr,
++					TOE_SW_FREEQ_DESC_NUM) != fq_rwptr.bits.rptr) {
++		if ((skb = dev_alloc_skb(SW_RX_BUF_SIZE)) == NULL) {
++			printk("%s::skb allocation fail!\n", __func__);
++			//while(1);
++			break;
++		}
++		REG32(skb->data) = (unsigned int)skb;
++		skb_reserve(skb, SKB_RESERVE_BYTES);
++		// fq_rwptr.bits32 = readl(TOE_GLOBAL_BASE + GLOBAL_SWFQ_RWPTR_REG);
++		fq_rwptr.bits.wptr = RWPTR_ADVANCE_ONE(fq_rwptr.bits.wptr,
++			TOE_SW_FREEQ_DESC_NUM);
++		fq_desc = (GMAC_RXDESC_T*)toe_private_data.swfq_desc_base+fq_rwptr.bits.wptr;
++		fq_desc->word2.buf_adr = (unsigned int)__pa(skb->data);
++		SET_WPTR(TOE_GLOBAL_BASE+GLOBAL_SWFQ_RWPTR_REG, fq_rwptr.bits.wptr);
++		toe_private_data.fq_rx_rwptr.bits32 = fq_rwptr.bits32;
++	}
++	spin_unlock_irqrestore(&gmac_fq_lock, flags);
++}
++// EXPORT_SYMBOL(toe_gmac_fill_free_q);
++
++/*----------------------------------------------------------------------
++* toe_gmac_interrupt
++*----------------------------------------------------------------------*/
++static irqreturn_t toe_gmac_interrupt (int irq, void *dev_instance)
++{
++	struct net_device   *dev = (struct net_device *)dev_instance;
++	TOE_INFO_T			*toe;
++	GMAC_INFO_T 		*tp = (GMAC_INFO_T *)dev->priv;
++	unsigned int		status0;
++	unsigned int		status1;
++	unsigned int		status2;
++	unsigned int		status3;
++	unsigned int		status4;
++
++//	struct net_device_stats *isPtr = (struct net_device_stats *)&tp->ifStatics;
++	toe = (TOE_INFO_T *)&toe_private_data;
++//	handle NAPI
++#ifdef CONFIG_SL_NAPI
++if (storlink_ctl.pauseoff == 1)
++{
++/* disable GMAC interrupt */
++    //toe_gmac_disable_interrupt(tp->irq);
++
++//	isPtr->interrupts++;
++	/* read Interrupt status */
++	status0 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_STATUS_0_REG);
++	status1 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_STATUS_1_REG);
++	status2 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_STATUS_2_REG);
++	status3 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_STATUS_3_REG);
++	status4 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_STATUS_4_REG);
++	// prompt warning if status bit ON but not enabled
++#if 0
++	if (status0 & ~tp->intr0_enabled)
++		printk("Intr 0 Status error. status = 0x%X, enable = 0x%X\n",
++				status0, tp->intr0_enabled);
++	if (status1 & ~tp->intr1_enabled)
++		printk("Intr 1 Status error. status = 0x%X, enable = 0x%X\n",
++				status1, tp->intr1_enabled);
++	if (status2 & ~tp->intr2_enabled)
++		printk("Intr 2 Status error. status = 0x%X, enable = 0x%X\n",
++				status2, tp->intr2_enabled);
++	if (status3 & ~tp->intr3_enabled)
++		printk("Intr 3 Status error. status = 0x%X, enable = 0x%X\n",
++				status3, tp->intr3_enabled);
++	if (status4 & ~tp->intr4_enabled)
++		printk("Intr 4 Status error. status = 0x%X, enable = 0x%X\n",
++				status4, tp->intr4_enabled);
++#endif
++
++	if (status0)
++		writel(status0 & tp->intr0_enabled, TOE_GLOBAL_BASE+GLOBAL_INTERRUPT_STATUS_0_REG);
++	if (status1)
++		writel(status1 & tp->intr1_enabled, TOE_GLOBAL_BASE+GLOBAL_INTERRUPT_STATUS_1_REG);
++	if (status2)
++		writel(status2 & tp->intr2_enabled, TOE_GLOBAL_BASE+GLOBAL_INTERRUPT_STATUS_2_REG);
++	if (status3)
++		writel(status3 & tp->intr3_enabled, TOE_GLOBAL_BASE+GLOBAL_INTERRUPT_STATUS_3_REG);
++	if (status4)
++		writel(status4 & tp->intr4_enabled, TOE_GLOBAL_BASE+GLOBAL_INTERRUPT_STATUS_4_REG);
++#if 0
++	/* handle freeq interrupt first */
++	if (status4 & tp->intr4_enabled) {
++		if ((status4 & SWFQ_EMPTY_INT_BIT) && (tp->intr4_enabled & SWFQ_EMPTY_INT_BIT))
++		{
++			// unsigned long data = REG32(TOE_GLOBAL_BASE + GLOBAL_SWFQ_RWPTR_REG);
++			//gmac_write_reg(TOE_GLOBAL_BASE, GLOBAL_INTERRUPT_ENABLE_4_REG,
++			//	tp->intr4_enabled & ~SWFQ_EMPTY_INT_BIT, SWFQ_EMPTY_INT_BIT);
++
++			if (toe->gmac[0].dev && netif_running(toe->gmac[0].dev))
++				toe_gmac_handle_default_rxq(toe->gmac[0].dev,&toe->gmac[0]);
++			if (toe->gmac[1].dev && netif_running(toe->gmac[1].dev))
++				toe_gmac_handle_default_rxq(toe->gmac[1].dev,&toe->gmac[1]);
++			printk("\nfreeq int\n");
++			toe_gmac_fill_free_q();
++			tp->sw_fq_empty_cnt++;
++
++		}
++	}
++#endif
++	// Interrupt Status 1
++	if (status1 & tp->intr1_enabled)
++	{
++		#define G1_INTR0_BITS	(GMAC1_HWTQ13_EOF_INT_BIT | GMAC1_HWTQ12_EOF_INT_BIT | GMAC1_HWTQ11_EOF_INT_BIT | GMAC1_HWTQ10_EOF_INT_BIT)
++		#define G0_INTR0_BITS	(GMAC0_HWTQ03_EOF_INT_BIT | GMAC0_HWTQ02_EOF_INT_BIT | GMAC0_HWTQ01_EOF_INT_BIT | GMAC0_HWTQ00_EOF_INT_BIT)
++		// Handle GMAC 0/1 HW Tx queue 0-3 EOF events
++		// Only count
++		// TOE, Classification, and default queues interrupts are handled by ISR
++		// because they should pass packets to upper layer
++		if (tp->port_id == 0)
++		{
++			if (netif_running(dev) && (status1 & G0_INTR0_BITS) && (tp->intr1_enabled & G0_INTR0_BITS))
++			{
++				if (status1 & GMAC0_HWTQ03_EOF_INT_BIT)
++					tp->hwtxq[3].eof_cnt++;
++				if (status1 & GMAC0_HWTQ02_EOF_INT_BIT)
++					tp->hwtxq[2].eof_cnt++;
++				if (status1 & GMAC0_HWTQ01_EOF_INT_BIT)
++					tp->hwtxq[1].eof_cnt++;
++				if (status1 & GMAC0_HWTQ00_EOF_INT_BIT)
++					tp->hwtxq[0].eof_cnt++;
++			}
++				if (netif_running(dev) && (status1 & DEFAULT_Q0_INT_BIT) && (tp->intr1_enabled & DEFAULT_Q0_INT_BIT))
++				{
++					if (likely(netif_rx_schedule_prep(dev)))
++        			{
++        				unsigned int data32;
++        				// disable GMAC-0 rx interrupt
++        				// class-Q & TOE-Q are implemented in future
++        				//data32 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_1_REG);
++        				//data32 &= ~DEFAULT_Q0_INT_BIT;
++						//writel(data32, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_1_REG);
++						//printk("\%s: DEFAULT_Q0_INT_BIT===================>>>>>>>>>>>>\n",__func__);
++						writel(0x0, TOE_GLOBAL_BASE+GLOBAL_INTERRUPT_ENABLE_1_REG);
++						//tp->total_q_cnt_napi=0;
++						//rx_time = jiffies;
++						//rx_old_bytes = isPtr->rx_bytes;
++            			__netif_rx_schedule(dev);
++        			}
++			}
++		}
++		else if (tp->port_id == 1)
++		{
++			if (netif_running(dev) && (status1 & G1_INTR0_BITS) && (tp->intr1_enabled & G1_INTR0_BITS))
++			{
++				if (status1 & GMAC1_HWTQ13_EOF_INT_BIT)
++					tp->hwtxq[3].eof_cnt++;
++				if (status1 & GMAC1_HWTQ12_EOF_INT_BIT)
++					tp->hwtxq[2].eof_cnt++;
++				if (status1 & GMAC1_HWTQ11_EOF_INT_BIT)
++					tp->hwtxq[1].eof_cnt++;
++				if (status1 & GMAC1_HWTQ10_EOF_INT_BIT)
++					tp->hwtxq[0].eof_cnt++;
++			}
++
++			if (netif_running(dev) && (status1 & DEFAULT_Q1_INT_BIT) && (tp->intr1_enabled & DEFAULT_Q1_INT_BIT))
++			{
++				if (likely(netif_rx_schedule_prep(dev)))
++        		{
++        			unsigned int data32;
++         			// disable GMAC-0 rx interrupt
++        			// class-Q & TOE-Q are implemented in future
++        			//data32 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_1_REG);
++        			//data32 &= ~DEFAULT_Q1_INT_BIT;
++					//writel(data32, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_1_REG);
++					//printk("\%s: 1111111111--->DEFAULT_Q1_INT_BIT===================>>>>>>>>>>>>\n",__func__);
++					writel(0x0, TOE_GLOBAL_BASE+GLOBAL_INTERRUPT_ENABLE_1_REG);
++					//tp->total_q_cnt_napi=0;
++					//rx_time = jiffies;
++					//rx_old_bytes = isPtr->rx_bytes;
++           			__netif_rx_schedule(dev);
++        		}
++			}
++		}
++	}
++
++	// Interrupt Status 0
++	if (status0 & tp->intr0_enabled)
++	{
++		#define ERR_INTR_BITS	(GMAC0_TXDERR_INT_BIT | GMAC0_TXPERR_INT_BIT |	\
++								 GMAC1_TXDERR_INT_BIT | GMAC1_TXPERR_INT_BIT |	\
++								 GMAC0_RXDERR_INT_BIT | GMAC0_RXPERR_INT_BIT |	\
++								 GMAC1_RXDERR_INT_BIT | GMAC1_RXPERR_INT_BIT)
++
++		if (status0 &  ERR_INTR_BITS)
++		{
++			if ((status0 & GMAC0_TXDERR_INT_BIT) && (tp->intr0_enabled & GMAC0_TXDERR_INT_BIT))
++			{
++				tp->txDerr_cnt[0]++;
++				printk("GMAC0 TX AHB Bus Error!\n");
++			}
++			if ((status0 & GMAC0_TXPERR_INT_BIT) && (tp->intr0_enabled & GMAC0_TXPERR_INT_BIT))
++			{
++				tp->txPerr_cnt[0]++;
++				printk("GMAC0 Tx Descriptor Protocol Error!\n");
++			}
++			if ((status0 & GMAC1_TXDERR_INT_BIT) && (tp->intr0_enabled & GMAC1_TXDERR_INT_BIT))
++			{
++				tp->txDerr_cnt[1]++;
++				printk("GMAC1 Tx AHB Bus Error!\n");
++			}
++			if ((status0 & GMAC1_TXPERR_INT_BIT) && (tp->intr0_enabled & GMAC1_TXPERR_INT_BIT))
++			{
++				tp->txPerr_cnt[1]++;
++				printk("GMAC1 Tx Descriptor Protocol Error!\n");
++			}
++
++			if ((status0 & GMAC0_RXDERR_INT_BIT) && (tp->intr0_enabled & GMAC0_RXDERR_INT_BIT))
++			{
++				tp->RxDerr_cnt[0]++;
++				printk("GMAC0 Rx AHB Bus Error!\n");
++			}
++			if ((status0 & GMAC0_RXPERR_INT_BIT) && (tp->intr0_enabled & GMAC0_RXPERR_INT_BIT))
++			{
++				tp->RxPerr_cnt[0]++;
++				printk("GMAC0 Rx Descriptor Protocol Error!\n");
++			}
++			if ((status0 & GMAC1_RXDERR_INT_BIT) && (tp->intr0_enabled & GMAC1_RXDERR_INT_BIT))
++			{
++				tp->RxDerr_cnt[1]++;
++				printk("GMAC1 Rx AHB Bus Error!\n");
++			}
++			if ((status0 & GMAC1_RXPERR_INT_BIT) && (tp->intr0_enabled & GMAC1_RXPERR_INT_BIT))
++			{
++				tp->RxPerr_cnt[1]++;
++				printk("GMAC1 Rx Descriptor Protocol Error!\n");
++			}
++		}
++
++#ifndef	GMAX_TX_INTR_DISABLED
++		if (tp->port_id == 1 &&	netif_running(dev) &&
++			(((status0 & GMAC1_SWTQ10_FIN_INT_BIT) && (tp->intr0_enabled & GMAC1_SWTQ10_FIN_INT_BIT))
++			||
++			((status0 & GMAC1_SWTQ10_EOF_INT_BIT) && (tp->intr0_enabled & GMAC1_SWTQ10_EOF_INT_BIT))))
++		{
++			toe_gmac_tx_complete(&toe_private_data.gmac[1], 0, dev, 1);
++		}
++
++		if (tp->port_id == 0 &&	netif_running(dev) &&
++			(((status0 & GMAC0_SWTQ00_FIN_INT_BIT) && (tp->intr0_enabled & GMAC0_SWTQ00_FIN_INT_BIT))
++			||
++			((status0 & GMAC0_SWTQ00_EOF_INT_BIT) && (tp->intr0_enabled & GMAC0_SWTQ00_EOF_INT_BIT))))
++		{
++			toe_gmac_tx_complete(&toe_private_data.gmac[0], 0, dev, 1);
++		}
++#endif
++	}
++	// Interrupt Status 4
++	if (status4 & tp->intr4_enabled)
++	{
++		#define G1_INTR4_BITS		(0xff000000)
++		#define G0_INTR4_BITS		(0x00ff0000)
++
++		if (tp->port_id == 0)
++		{
++			if ((status4 & G0_INTR4_BITS) && (tp->intr4_enabled & G0_INTR4_BITS))
++			{
++				if (status4 & GMAC0_RESERVED_INT_BIT)
++					printk("GMAC0_RESERVED_INT_BIT is ON\n");
++				if (status4 & GMAC0_MIB_INT_BIT)
++					tp->mib_full_cnt++;
++				if (status4 & GMAC0_RX_PAUSE_ON_INT_BIT)
++					tp->rx_pause_on_cnt++;
++				if (status4 & GMAC0_TX_PAUSE_ON_INT_BIT)
++					tp->tx_pause_on_cnt++;
++				if (status4 & GMAC0_RX_PAUSE_OFF_INT_BIT)
++					tp->rx_pause_off_cnt++;
++				if (status4 & GMAC0_TX_PAUSE_OFF_INT_BIT)
++					tp->rx_pause_off_cnt++;
++				if (status4 & GMAC0_RX_OVERRUN_INT_BIT)
++					tp->rx_overrun_cnt++;
++				if (status4 & GMAC0_STATUS_CHANGE_INT_BIT)
++					tp->status_changed_cnt++;
++			}
++		}
++		else if (tp->port_id == 1)
++		{
++			if ((status4 & G1_INTR4_BITS) && (tp->intr4_enabled & G1_INTR4_BITS))
++			{
++				if (status4 & GMAC1_RESERVED_INT_BIT)
++					printk("GMAC1_RESERVED_INT_BIT is ON\n");
++				if (status4 & GMAC1_MIB_INT_BIT)
++					tp->mib_full_cnt++;
++				if (status4 & GMAC1_RX_PAUSE_ON_INT_BIT)
++				{
++					printk("Gmac pause on\n");
++					tp->rx_pause_on_cnt++;
++				}
++				if (status4 & GMAC1_TX_PAUSE_ON_INT_BIT)
++				{
++					printk("Gmac pause on\n");
++					tp->tx_pause_on_cnt++;
++				}
++				if (status4 & GMAC1_RX_PAUSE_OFF_INT_BIT)
++				{
++					printk("Gmac pause off\n");
++					tp->rx_pause_off_cnt++;
++				}
++				if (status4 & GMAC1_TX_PAUSE_OFF_INT_BIT)
++				{
++					printk("Gmac pause off\n");
++					tp->rx_pause_off_cnt++;
++				}
++				if (status4 & GMAC1_RX_OVERRUN_INT_BIT)
++				{
++					//printk("Gmac Rx Overrun \n");
++					tp->rx_overrun_cnt++;
++				}
++				if (status4 & GMAC1_STATUS_CHANGE_INT_BIT)
++					tp->status_changed_cnt++;
++			}
++		}
++	}
++
++	//toe_gmac_enable_interrupt(tp->irq);
++#ifdef IxscriptMate_1518
++	if (storlink_ctl.pauseoff == 1)
++	{
++		GMAC_CONFIG0_T config0;
++		config0.bits32 = readl(TOE_GMAC0_BASE+GMAC_CONFIG0);
++		config0.bits.dis_rx = 0;
++		writel(config0.bits32, TOE_GMAC0_BASE+GMAC_CONFIG0);
++		config0.bits32 = readl(TOE_GMAC1_BASE+GMAC_CONFIG0);
++		config0.bits.dis_rx = 0;
++		writel(config0.bits32, TOE_GMAC1_BASE+GMAC_CONFIG0);
++	}
++#endif
++//	 enable_irq(gmac_irq[dev_index]);
++	//printk("gmac_interrupt complete!\n\n");
++//	return IRQ_RETVAL(handled);
++	return	IRQ_RETVAL(1);
++}
++else
++{
++#endif	//endif NAPI
++
++
++	/* disable GMAC interrupt */
++    toe_gmac_disable_interrupt(tp->irq);
++
++//	isPtr->interrupts++;
++	/* read Interrupt status */
++	status0 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_STATUS_0_REG);
++	status1 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_STATUS_1_REG);
++	status2 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_STATUS_2_REG);
++	status3 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_STATUS_3_REG);
++	status4 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_STATUS_4_REG);
++	// prompt warning if status bit ON but not enabled
++#if 0
++	if (status0 & ~tp->intr0_enabled)
++		printk("Intr 0 Status error. status = 0x%X, enable = 0x%X\n",
++				status0, tp->intr0_enabled);
++	if (status1 & ~tp->intr1_enabled)
++		printk("Intr 1 Status error. status = 0x%X, enable = 0x%X\n",
++				status1, tp->intr1_enabled);
++	if (status2 & ~tp->intr2_enabled)
++		printk("Intr 2 Status error. status = 0x%X, enable = 0x%X\n",
++				status2, tp->intr2_enabled);
++	if (status3 & ~tp->intr3_enabled)
++		printk("Intr 3 Status error. status = 0x%X, enable = 0x%X\n",
++				status3, tp->intr3_enabled);
++	if (status4 & ~tp->intr4_enabled)
++		printk("Intr 4 Status error. status = 0x%X, enable = 0x%X\n",
++				status4, tp->intr4_enabled);
++#endif
++#define	INTERRUPT_SELECT			1
++	if (status0)
++		writel(status0 & tp->intr0_enabled, TOE_GLOBAL_BASE+GLOBAL_INTERRUPT_STATUS_0_REG);
++	if (status1)
++		writel(status1 & tp->intr1_enabled, TOE_GLOBAL_BASE+GLOBAL_INTERRUPT_STATUS_1_REG);
++	if (status2)
++		writel(status2 & tp->intr2_enabled, TOE_GLOBAL_BASE+GLOBAL_INTERRUPT_STATUS_2_REG);
++	if (status3)
++		writel(status3 & tp->intr3_enabled, TOE_GLOBAL_BASE+GLOBAL_INTERRUPT_STATUS_3_REG);
++	if (status4)
++		writel(status4 & tp->intr4_enabled, TOE_GLOBAL_BASE+GLOBAL_INTERRUPT_STATUS_4_REG);
++
++	/* handle freeq interrupt first */
++	if (status4 & tp->intr4_enabled) {
++		if ((status4 & SWFQ_EMPTY_INT_BIT) && (tp->intr4_enabled & SWFQ_EMPTY_INT_BIT))
++		{
++			// unsigned long data = REG32(TOE_GLOBAL_BASE + GLOBAL_SWFQ_RWPTR_REG);
++			//gmac_write_reg(TOE_GLOBAL_BASE, GLOBAL_INTERRUPT_ENABLE_4_REG,
++			//	tp->intr4_enabled & ~SWFQ_EMPTY_INT_BIT, SWFQ_EMPTY_INT_BIT);
++
++			//gmac_write_reg(TOE_GLOBAL_BASE, GLOBAL_INTERRUPT_STATUS_4_REG,
++			//	SWFQ_EMPTY_INT_BIT, SWFQ_EMPTY_INT_BIT);
++			if (toe->gmac[0].dev && netif_running(toe->gmac[0].dev))
++				toe_gmac_handle_default_rxq(toe->gmac[0].dev,&toe->gmac[0]);
++			if (toe->gmac[1].dev && netif_running(toe->gmac[1].dev))
++				toe_gmac_handle_default_rxq(toe->gmac[1].dev,&toe->gmac[1]);
++			printk("\nfreeq int\n");
++			toe_gmac_fill_free_q();
++			tp->sw_fq_empty_cnt++;
++
++			gmac_write_reg(TOE_GLOBAL_BASE, GLOBAL_INTERRUPT_STATUS_4_REG, status4,
++				SWFQ_EMPTY_INT_BIT);
++		}
++	}
++
++	// Interrupt Status 1
++	if (status1 & tp->intr1_enabled)
++	{
++		#define G1_INTR0_BITS	(GMAC1_HWTQ13_EOF_INT_BIT | GMAC1_HWTQ12_EOF_INT_BIT | GMAC1_HWTQ11_EOF_INT_BIT | GMAC1_HWTQ10_EOF_INT_BIT)
++		#define G0_INTR0_BITS	(GMAC0_HWTQ03_EOF_INT_BIT | GMAC0_HWTQ02_EOF_INT_BIT | GMAC0_HWTQ01_EOF_INT_BIT | GMAC0_HWTQ00_EOF_INT_BIT)
++		// Handle GMAC 0/1 HW Tx queue 0-3 EOF events
++		// Only count
++		// TOE, Classification, and default queues interrupts are handled by ISR
++		// because they should pass packets to upper layer
++		if (tp->port_id == 0)
++		{
++#ifndef	INTERRUPT_SELECT
++			if (netif_running(dev) && (status1 & G0_INTR0_BITS) && (tp->intr1_enabled & G0_INTR0_BITS))
++			{
++				if (status1 & GMAC0_HWTQ03_EOF_INT_BIT)
++					tp->hwtxq[3].eof_cnt++;
++				if (status1 & GMAC0_HWTQ02_EOF_INT_BIT)
++					tp->hwtxq[2].eof_cnt++;
++				if (status1 & GMAC0_HWTQ01_EOF_INT_BIT)
++					tp->hwtxq[1].eof_cnt++;
++				if (status1 & GMAC0_HWTQ00_EOF_INT_BIT)
++					tp->hwtxq[0].eof_cnt++;
++#endif	//INTERRUPT_SELECT
++#ifndef	INTERRUPT_SELECT
++			}
++#endif	//INTERRUPT_SELECT
++			if (netif_running(dev) && (status1 & DEFAULT_Q0_INT_BIT) && (tp->intr1_enabled & DEFAULT_Q0_INT_BIT))
++			{
++				tp->default_q_intr_cnt++;
++				toe_gmac_handle_default_rxq(dev, tp);
++			}
++#ifdef CONFIG_SL351x_RXTOE
++			if (netif_running(dev) && (status1 & TOE_IQ_ALL_BITS) &&
++			    (tp->intr1_enabled & TOE_IQ_ALL_BITS)) {
++				//printk("status %x, bits %x, slct %x\n", status1, TOE_IQ_ALL_BITS, tp->intr1_selected);
++				toe_gmac_handle_toeq(dev, tp, status1);
++				//toe_gmac_handle_toeq(dev, toe, tp, status1);
++			}
++#endif
++		}
++		else if (tp->port_id == 1)
++		{
++#ifndef	INTERRUPT_SELECT
++			if (netif_running(dev) && (status1 & G1_INTR0_BITS) && (tp->intr1_enabled & G1_INTR0_BITS))
++			{
++				if (status1 & GMAC1_HWTQ13_EOF_INT_BIT)
++					tp->hwtxq[3].eof_cnt++;
++				if (status1 & GMAC1_HWTQ12_EOF_INT_BIT)
++					tp->hwtxq[2].eof_cnt++;
++				if (status1 & GMAC1_HWTQ11_EOF_INT_BIT)
++					tp->hwtxq[1].eof_cnt++;
++				if (status1 & GMAC1_HWTQ10_EOF_INT_BIT)
++					tp->hwtxq[0].eof_cnt++;
++#endif	//INTERRUPT_SELECT
++#ifndef	INTERRUPT_SELECT
++			}
++#endif	//INTERRUPT_SELECT
++			if (netif_running(dev) && (status1 & DEFAULT_Q1_INT_BIT) && (tp->intr1_enabled & DEFAULT_Q1_INT_BIT))
++			{
++				tp->default_q_intr_cnt++;
++				toe_gmac_handle_default_rxq(dev, tp);
++			}
++#ifdef CONFIG_SL351x_RXTOE
++			if (netif_running(dev) && (status1 & TOE_IQ_ALL_BITS) &&
++			    (tp->intr1_enabled & TOE_IQ_ALL_BITS)) {
++				//printk("status %x, bits %x, slct %x\n", status1, TOE_IQ_ALL_BITS, tp->intr1_selected);
++				toe_gmac_handle_toeq(dev, tp, status1);
++				//toe_gmac_handle_toeq(dev, toe, tp, status1);
++			}
++#endif
++		}
++	}
++
++
++	// Interrupt Status 0
++	if (status0 & tp->intr0_enabled)
++	{
++
++		#define ERR_INTR_BITS	(GMAC0_TXDERR_INT_BIT | GMAC0_TXPERR_INT_BIT |	\
++								 GMAC1_TXDERR_INT_BIT | GMAC1_TXPERR_INT_BIT |	\
++								 GMAC0_RXDERR_INT_BIT | GMAC0_RXPERR_INT_BIT |	\
++								 GMAC1_RXDERR_INT_BIT | GMAC1_RXPERR_INT_BIT)
++#ifndef	INTERRUPT_SELECT
++		if (status0 &  ERR_INTR_BITS)
++		{
++			if ((status0 & GMAC0_TXDERR_INT_BIT) && (tp->intr0_enabled & GMAC0_TXDERR_INT_BIT))
++			{
++				tp->txDerr_cnt[0]++;
++				printk("GMAC0 TX AHB Bus Error!\n");
++			}
++			if ((status0 & GMAC0_TXPERR_INT_BIT) && (tp->intr0_enabled & GMAC0_TXPERR_INT_BIT))
++			{
++				tp->txPerr_cnt[0]++;
++				printk("GMAC0 Tx Descriptor Protocol Error!\n");
++			}
++			if ((status0 & GMAC1_TXDERR_INT_BIT) && (tp->intr0_enabled & GMAC1_TXDERR_INT_BIT))
++			{
++				tp->txDerr_cnt[1]++;
++				printk("GMAC1 Tx AHB Bus Error!\n");
++			}
++			if ((status0 & GMAC1_TXPERR_INT_BIT) && (tp->intr0_enabled & GMAC1_TXPERR_INT_BIT))
++			{
++				tp->txPerr_cnt[1]++;
++				printk("GMAC1 Tx Descriptor Protocol Error!\n");
++			}
++
++			if ((status0 & GMAC0_RXDERR_INT_BIT) && (tp->intr0_enabled & GMAC0_RXDERR_INT_BIT))
++			{
++				tp->RxDerr_cnt[0]++;
++				printk("GMAC0 Rx AHB Bus Error!\n");
++			}
++			if ((status0 & GMAC0_RXPERR_INT_BIT) && (tp->intr0_enabled & GMAC0_RXPERR_INT_BIT))
++			{
++				tp->RxPerr_cnt[0]++;
++				printk("GMAC0 Rx Descriptor Protocol Error!\n");
++			}
++			if ((status0 & GMAC1_RXDERR_INT_BIT) && (tp->intr0_enabled & GMAC1_RXDERR_INT_BIT))
++			{
++				tp->RxDerr_cnt[1]++;
++				printk("GMAC1 Rx AHB Bus Error!\n");
++			}
++			if ((status0 & GMAC1_RXPERR_INT_BIT) && (tp->intr0_enabled & GMAC1_RXPERR_INT_BIT))
++			{
++				tp->RxPerr_cnt[1]++;
++				printk("GMAC1 Rx Descriptor Protocol Error!\n");
++			}
++		}
++#endif	//INTERRUPT_SELECT
++#ifndef	GMAX_TX_INTR_DISABLED
++		if (tp->port_id == 1 &&	netif_running(dev) &&
++			(((status0 & GMAC1_SWTQ10_FIN_INT_BIT) && (tp->intr0_enabled & GMAC1_SWTQ10_FIN_INT_BIT))
++			||
++			((status0 & GMAC1_SWTQ10_EOF_INT_BIT) && (tp->intr0_enabled & GMAC1_SWTQ10_EOF_INT_BIT))))
++		{
++			toe_gmac_tx_complete(&toe_private_data.gmac[1], 0, dev, 1);
++		}
++
++		if (tp->port_id == 0 &&	netif_running(dev) &&
++			(((status0 & GMAC0_SWTQ00_FIN_INT_BIT) && (tp->intr0_enabled & GMAC0_SWTQ00_FIN_INT_BIT))
++			||
++			((status0 & GMAC0_SWTQ00_EOF_INT_BIT) && (tp->intr0_enabled & GMAC0_SWTQ00_EOF_INT_BIT))))
++		{
++			toe_gmac_tx_complete(&toe_private_data.gmac[0], 0, dev, 1);
++		}
++#endif
++		// clear enabled status bits
++	}
++	// Interrupt Status 4
++#ifndef	INTERRUPT_SELECT
++	if (status4 & tp->intr4_enabled)
++	{
++		#define G1_INTR4_BITS		(0xff000000)
++		#define G0_INTR4_BITS		(0x00ff0000)
++
++		if (tp->port_id == 0)
++		{
++			if ((status4 & G0_INTR4_BITS) && (tp->intr4_enabled & G0_INTR4_BITS))
++			{
++				if (status4 & GMAC0_RESERVED_INT_BIT)
++					printk("GMAC0_RESERVED_INT_BIT is ON\n");
++				if (status4 & GMAC0_MIB_INT_BIT)
++					tp->mib_full_cnt++;
++				if (status4 & GMAC0_RX_PAUSE_ON_INT_BIT)
++					tp->rx_pause_on_cnt++;
++				if (status4 & GMAC0_TX_PAUSE_ON_INT_BIT)
++					tp->tx_pause_on_cnt++;
++				if (status4 & GMAC0_RX_PAUSE_OFF_INT_BIT)
++					tp->rx_pause_off_cnt++;
++				if (status4 & GMAC0_TX_PAUSE_OFF_INT_BIT)
++					tp->rx_pause_off_cnt++;
++				if (status4 & GMAC0_RX_OVERRUN_INT_BIT)
++					tp->rx_overrun_cnt++;
++				if (status4 & GMAC0_STATUS_CHANGE_INT_BIT)
++					tp->status_changed_cnt++;
++			}
++		}
++		else if (tp->port_id == 1)
++		{
++			if ((status4 & G1_INTR4_BITS) && (tp->intr4_enabled & G1_INTR4_BITS))
++			{
++				if (status4 & GMAC1_RESERVED_INT_BIT)
++					printk("GMAC1_RESERVED_INT_BIT is ON\n");
++				if (status4 & GMAC1_MIB_INT_BIT)
++					tp->mib_full_cnt++;
++				if (status4 & GMAC1_RX_PAUSE_ON_INT_BIT)
++				{
++					//printk("Gmac pause on\n");
++					tp->rx_pause_on_cnt++;
++				}
++				if (status4 & GMAC1_TX_PAUSE_ON_INT_BIT)
++				{
++					//printk("Gmac pause on\n");
++					tp->tx_pause_on_cnt++;
++				}
++				if (status4 & GMAC1_RX_PAUSE_OFF_INT_BIT)
++				{
++					//printk("Gmac pause off\n");
++					tp->rx_pause_off_cnt++;
++				}
++				if (status4 & GMAC1_TX_PAUSE_OFF_INT_BIT)
++				{
++					//printk("Gmac pause off\n");
++					tp->rx_pause_off_cnt++;
++				}
++				if (status4 & GMAC1_RX_OVERRUN_INT_BIT)
++				{
++					//printk("Gmac Rx Overrun \n");
++					tp->rx_overrun_cnt++;
++				}
++				if (status4 & GMAC1_STATUS_CHANGE_INT_BIT)
++					tp->status_changed_cnt++;
++			}
++		}
++#if 0
++		if ((status4 & SWFQ_EMPTY_INT_BIT) && (tp->intr4_enabled & SWFQ_EMPTY_INT_BIT))
++		{
++			// unsigned long data = REG32(TOE_GLOBAL_BASE + GLOBAL_SWFQ_RWPTR_REG);
++//			mac_stop_rxdma(tp->sc);
++			gmac_write_reg(TOE_GLOBAL_BASE, GLOBAL_INTERRUPT_ENABLE_4_REG,
++				tp->intr4_enabled & ~SWFQ_EMPTY_INT_BIT, SWFQ_EMPTY_INT_BIT);
++
++			gmac_write_reg(TOE_GLOBAL_BASE, GLOBAL_INTERRUPT_STATUS_4_REG,
++				SWFQ_EMPTY_INT_BIT, SWFQ_EMPTY_INT_BIT);
++			toe_gmac_fill_free_q();
++			tp->sw_fq_empty_cnt++;
++
++			gmac_write_reg(TOE_GLOBAL_BASE, GLOBAL_INTERRUPT_STATUS_4_REG, status4,
++				SWFQ_EMPTY_INT_BIT);
++//#if 0
++/*			if (netif_running(dev))
++				toe_gmac_handle_default_rxq(dev, tp);
++			printk("SWFQ_EMPTY_INT_BIT is ON!\n");	// should not be happened */
++//#endif
++		}
++#endif
++	}
++#endif	//INTERRUPT_SELECT
++	toe_gmac_enable_interrupt(tp->irq);
++//enable gmac rx function when do RFC 2544
++#ifdef IxscriptMate_1518
++	if (storlink_ctl.pauseoff == 1)
++	{
++		GMAC_CONFIG0_T config0;
++		config0.bits32 = readl(TOE_GMAC0_BASE+GMAC_CONFIG0);
++		config0.bits.dis_rx = 0;
++		writel(config0.bits32, TOE_GMAC0_BASE+GMAC_CONFIG0);
++		config0.bits32 = readl(TOE_GMAC1_BASE+GMAC_CONFIG0);
++		config0.bits.dis_rx = 0;
++		writel(config0.bits32, TOE_GMAC1_BASE+GMAC_CONFIG0);
++	}
++#endif
++	//printk("gmac_interrupt complete!\n\n");
++//	return IRQ_RETVAL(handled);
++	return	IRQ_RETVAL(1);
++#ifdef CONFIG_SL_NAPI
++}
++#endif
++}
++
++/*----------------------------------------------------------------------
++*	toe_gmac_handle_default_rxq
++*	(1) Get rx Buffer for default Rx queue
++*	(2) notify or call upper-routine to handle it
++*	(3) get a new buffer and insert it into SW free queue
++*	(4) Note: The SW free queue Read-Write Pointer should be locked when accessing
++*----------------------------------------------------------------------*/
++//static inline void toe_gmac_handle_default_rxq(struct net_device *dev, GMAC_INFO_T *tp)
++static void toe_gmac_handle_default_rxq(struct net_device *dev, GMAC_INFO_T *tp)
++{
++	TOE_INFO_T			*toe;
++    GMAC_RXDESC_T   	*curr_desc;
++	struct sk_buff 		*skb;
++    DMA_RWPTR_T			rwptr;
++	unsigned int 		pkt_size;
++	int					max_cnt;
++	unsigned int        desc_count;
++	unsigned int        good_frame, chksum_status, rx_status;
++	struct net_device_stats *isPtr = (struct net_device_stats *)&tp->ifStatics;
++
++//when do ixia RFC 2544 test and packet size is select 1518 bytes,disable gmace rx function immediately after one interrupt come in.
++#ifdef IxscriptMate_1518
++	if (storlink_ctl.pauseoff == 1)
++	{
++		GMAC_CONFIG0_T config0;
++		config0.bits32 = readl(TOE_GMAC0_BASE+GMAC_CONFIG0);
++		config0.bits.dis_rx = 1;
++		writel(config0.bits32, TOE_GMAC0_BASE+GMAC_CONFIG0);
++		config0.bits32 = readl(TOE_GMAC1_BASE+GMAC_CONFIG0);
++		config0.bits.dis_rx = 1;
++		writel(config0.bits32, TOE_GMAC1_BASE+GMAC_CONFIG0);
++	}
++#endif
++	rwptr.bits32 = readl(&tp->default_qhdr->word1);
++#if 0
++	if (rwptr.bits.rptr != tp->rx_rwptr.bits.rptr)
++	{
++		mac_stop_txdma((struct net_device *)tp->dev);
++		printk("Default Queue HW RD ptr (0x%x) != SW RD Ptr (0x%x)\n",
++				rwptr.bits32, tp->rx_rwptr.bits.rptr);
++		while(1);
++	}
++#endif
++	toe = (TOE_INFO_T *)&toe_private_data;
++	max_cnt = DEFAULT_RXQ_MAX_CNT;
++	while ((--max_cnt) && rwptr.bits.rptr != rwptr.bits.wptr)
++//	while (rwptr.bits.rptr != rwptr.bits.wptr)
++	{
++//if packet size is not 1518 for RFC 2544,enable gmac rx function.The other packet size have RX workaround.
++#ifdef IxscriptMate_1518
++    	if (storlink_ctl.pauseoff == 1)
++		{
++			if (pkt_size != 1514)
++			{
++						GMAC_CONFIG0_T config0;
++						config0.bits32 = readl(TOE_GMAC0_BASE+GMAC_CONFIG0);
++						config0.bits.dis_rx = 0;
++						writel(config0.bits32, TOE_GMAC0_BASE+GMAC_CONFIG0);
++						config0.bits32 = readl(TOE_GMAC1_BASE+GMAC_CONFIG0);
++						config0.bits.dis_rx = 0;
++						writel(config0.bits32, TOE_GMAC1_BASE+GMAC_CONFIG0);
++			}
++		}
++#endif
++    	curr_desc = (GMAC_RXDESC_T *)tp->default_desc_base + rwptr.bits.rptr;
++//		consistent_sync(curr_desc, sizeof(GMAC_RXDESC_T), PCI_DMA_FROMDEVICE);
++		tp->default_q_cnt++;
++    	tp->rx_curr_desc = (unsigned int)curr_desc;
++    	rx_status = curr_desc->word0.bits.status;
++    	chksum_status = curr_desc->word0.bits.chksum_status;
++    	tp->rx_status_cnt[rx_status]++;
++    	tp->rx_chksum_cnt[chksum_status]++;
++        pkt_size = curr_desc->word1.bits.byte_count;  /*total byte count in a frame*/
++		desc_count = curr_desc->word0.bits.desc_count; /* get descriptor count per frame */
++		good_frame=1;
++		if ((curr_desc->word0.bits32 & (GMAC_RXDESC_0_T_derr | GMAC_RXDESC_0_T_perr))
++			|| (pkt_size < 60)
++		    || (chksum_status & 0x4)
++			|| rx_status)
++		{
++			good_frame = 0;
++			if (curr_desc->word0.bits32 & GMAC_RXDESC_0_T_derr)
++				printk("%s::derr (GMAC-%d)!!!\n", __func__, tp->port_id);
++			if (curr_desc->word0.bits32 & GMAC_RXDESC_0_T_perr)
++				printk("%s::perr (GMAC-%d)!!!\n", __func__, tp->port_id);
++			if (rx_status)
++			{
++				if (rx_status == 4 || rx_status == 7)
++					isPtr->rx_crc_errors++;
++//				printk("%s::Status=%d (GMAC-%d)!!!\n", __func__, rx_status, tp->port_id);
++			}
++#ifdef SL351x_GMAC_WORKAROUND
++			else if (pkt_size < 60)
++			{
++				if (tp->short_frames_cnt < GMAC_SHORT_FRAME_THRESHOLD)
++					tp->short_frames_cnt++;
++				if (tp->short_frames_cnt >= GMAC_SHORT_FRAME_THRESHOLD)
++				{
++					GMAC_CONFIG0_T config0;
++					config0.bits32 = readl(TOE_GMAC0_BASE+GMAC_CONFIG0);
++					config0.bits.dis_rx = 1;
++					writel(config0.bits32, TOE_GMAC0_BASE+GMAC_CONFIG0);
++					config0.bits32 = readl(TOE_GMAC1_BASE+GMAC_CONFIG0);
++					config0.bits.dis_rx = 1;
++					writel(config0.bits32, TOE_GMAC1_BASE+GMAC_CONFIG0);
++				}
++			}
++#endif
++//			if (chksum_status)
++//				printk("%s::Checksum Status=%d (GMAC-%d)!!!\n", __func__, chksum_status, tp->port_id);
++			skb = (struct sk_buff *)(REG32(__va(curr_desc->word2.buf_adr) - SKB_RESERVE_BYTES));
++			dev_kfree_skb_irq(skb);
++		}
++		if (good_frame)
++		{
++			if (curr_desc->word0.bits.drop)
++				printk("%s::Drop (GMAC-%d)!!!\n", __func__, tp->port_id);
++//			if (chksum_status)
++//				printk("%s::Checksum Status=%d (GMAC-%d)!!!\n", __func__, chksum_status, tp->port_id);
++
++	    	/* get frame information from the first descriptor of the frame */
++#ifdef SL351x_GMAC_WORKAROUND
++			if (tp->short_frames_cnt >= GMAC_SHORT_FRAME_THRESHOLD)
++			{
++				GMAC_CONFIG0_T config0;
++				config0.bits32 = readl(TOE_GMAC0_BASE+GMAC_CONFIG0);
++				config0.bits.dis_rx = 0;
++				writel(config0.bits32, TOE_GMAC0_BASE+GMAC_CONFIG0);
++				config0.bits32 = readl(TOE_GMAC1_BASE+GMAC_CONFIG0);
++				config0.bits.dis_rx = 0;
++				writel(config0.bits32, TOE_GMAC1_BASE+GMAC_CONFIG0);
++			}
++			tp->short_frames_cnt = 0;
++#endif
++			isPtr->rx_packets++;
++			skb = (struct sk_buff *)(REG32(__va(curr_desc->word2.buf_adr - SKB_RESERVE_BYTES)));
++			if (!skb)
++			{
++				printk("Fatal Error!!skb==NULL\n");
++				goto next_rx;
++			}
++			tp->curr_rx_skb = skb;
++			// consistent_sync((void *)__va(curr_desc->word2.buf_adr), pkt_size, PCI_DMA_FROMDEVICE);
++
++	//		curr_desc->word2.buf_adr = 0;
++
++			skb_reserve (skb, RX_INSERT_BYTES);	/* 16 byte align the IP fields. */
++			skb_put(skb, pkt_size);
++			skb->dev = dev;
++			if (chksum_status == RX_CHKSUM_IP_UDP_TCP_OK)
++			{
++				skb->ip_summed = CHECKSUM_UNNECESSARY;
++#ifdef CONFIG_SL351x_NAT
++				if (nat_cfg.enabled && curr_desc->word3.bits.l3_offset && curr_desc->word3.bits.l4_offset)
++				{
++					struct iphdr	*ip_hdr;
++					ip_hdr = (struct iphdr *)&(skb->data[curr_desc->word3.bits.l3_offset]);
++					sl351x_nat_input(skb,
++									tp->port_id,
++									(void *)curr_desc->word3.bits.l3_offset,
++								  	(void *)curr_desc->word3.bits.l4_offset);
++				}
++#endif
++				skb->protocol = eth_type_trans(skb,dev); /* set skb protocol */
++#if 0
++#ifdef CONFIG_SL351x_RXTOE
++				if (storlink_ctl.rx_max_pktsize) {
++					struct iphdr	*ip_hdr;
++					struct tcphdr	*tcp_hdr;
++					int ip_hdrlen;
++
++ 					ip_hdr = (struct iphdr*)&(skb->data[0]);
++					if ((skb->protocol == __constant_htons(ETH_P_IP)) &&
++					   ((ip_hdr->protocol & 0x00ff) == IPPROTO_TCP)) {
++						ip_hdrlen = ip_hdr->ihl << 2;
++						tcp_hdr = (struct tcphdr*)&(skb->data[ip_hdrlen]);
++						if (tcp_hdr->syn) {
++							struct toe_conn* connection = init_toeq(ip_hdr->version,
++									ip_hdr, tcp_hdr, toe, &(skb->data[0]) - 14);
++							TCP_SKB_CB(skb)->connection = connection;
++							//	hash_dump_entry(TCP_SKB_CB(skb)->connection->hash_entry_index);
++							//		printk("%s::skb data %x, conn %x, mode %x\n",
++							//			__func__, skb->data, connection, connection->mode);
++						}
++					}
++				}
++#endif
++#endif
++			}
++			else if (chksum_status == RX_CHKSUM_IP_OK_ONLY)
++			{
++				skb->ip_summed = CHECKSUM_UNNECESSARY;
++#ifdef CONFIG_SL351x_NAT
++				if (nat_cfg.enabled && curr_desc->word3.bits.l3_offset && curr_desc->word3.bits.l4_offset)
++				{
++					struct iphdr		*ip_hdr;
++					//struct tcphdr		*tcp_hdr;
++					ip_hdr = (struct iphdr *)&(skb->data[curr_desc->word3.bits.l3_offset]);
++					//tcp_hdr = (struct tcphdr *)&(skb->data[curr_desc->word3.bits.l4_offset]);
++					if (ip_hdr->protocol == IPPROTO_UDP)
++					{
++						sl351x_nat_input(skb,
++										tp->port_id,
++										(void *)curr_desc->word3.bits.l3_offset,
++								  		(void *)curr_desc->word3.bits.l4_offset);
++					}
++					else if (ip_hdr->protocol == IPPROTO_GRE)
++					{
++						sl351x_nat_input(skb,
++									tp->port_id,
++									(void *)curr_desc->word3.bits.l3_offset,
++								  	(void *)curr_desc->word3.bits.l4_offset);
++					}
++				}
++#endif
++				skb->protocol = eth_type_trans(skb,dev); /* set skb protocol */
++			}
++			else
++			{
++				skb->protocol = eth_type_trans(skb,dev); /* set skb protocol */
++			}
++
++			netif_rx(skb);  /* socket rx */
++			dev->last_rx = jiffies;
++
++			isPtr->rx_bytes += pkt_size;
++
++        }
++
++next_rx:
++		// advance one for Rx default Q 0/1
++		rwptr.bits.rptr = RWPTR_ADVANCE_ONE(rwptr.bits.rptr, tp->default_desc_num);
++		SET_RPTR(&tp->default_qhdr->word1, rwptr.bits.rptr);
++     	tp->rx_rwptr.bits32 = rwptr.bits32;
++
++		toe_gmac_fill_free_q();
++	}
++}
++
++/*----------------------------------------------------------------------
++* gmac_get_phy_vendor
++*----------------------------------------------------------------------*/
++static unsigned int gmac_get_phy_vendor(int phy_addr)
++{
++    unsigned int	reg_val;
++    reg_val=(mii_read(phy_addr,0x02) << 16) + mii_read(phy_addr,0x03);
++    return reg_val;
++}
++
++/*----------------------------------------------------------------------
++* gmac_set_phy_status
++*----------------------------------------------------------------------*/
++void gmac_set_phy_status(struct net_device *dev)
++{
++	GMAC_INFO_T *tp = dev->priv;
++	GMAC_STATUS_T   status;
++	unsigned int    reg_val, ability,wan_port_id;
++	unsigned int    i = 0;
++
++#ifdef VITESSE_G5SWITCH
++	if((tp->port_id == GMAC_PORT1)&&(Giga_switch==1)){
++#if 0
++		rcv_mask = SPI_read(2,0,0x10);			// Receive mask
++		rcv_mask |= 0x4F;
++		for(i=0;i<4;i++){
++			reg_val = BIT(26)|(i<<21)|(10<<16);
++			SPI_write(3,0,1,reg_val);
++			msleep(10);
++			reg_val = SPI_read(3,0,2);
++			if(reg_val & 0x0c00){
++				printk("Port%d:Giga mode\n",i);
++				SPI_write(1,i,0x00,0x300701B1);
++				SPI_write(1,i,0x00,0x10070181);
++				switch_pre_link[i]=LINK_UP;
++				switch_pre_speed[i]=GMAC_SPEED_1000;
++			}
++			else{
++				reg_val = BIT(26)|(i<<21)|(5<<16);
++				SPI_write(3,0,1,reg_val);
++				msleep(10);
++				ability = (reg_val = SPI_read(3,0,2)&0x5e0) >>5;
++				if ((ability & 0x0C)) /* 100M full duplex */
++				{
++					SPI_write(1,i,0x00,0x30050472);
++					SPI_write(1,i,0x00,0x10050442);
++					printk("Port%d:100M\n",i);
++					switch_pre_link[i]=LINK_UP;
++				switch_pre_speed[i]=GMAC_SPEED_100;
++				}
++				else if((ability & 0x03)) /* 10M full duplex */
++				{
++					SPI_write(1,i,0x00,0x30050473);
++					SPI_write(1,i,0x00,0x10050443);
++					printk("Port%d:10M\n",i);
++					switch_pre_link[i]=LINK_UP;
++					switch_pre_speed[i]=GMAC_SPEED_10;
++				}
++				else{
++					SPI_write(1,i,0x00,BIT(16));			// disable RX
++					SPI_write(5,0,0x0E,BIT(i));			// dicard packet
++					while((SPI_read(5,0,0x0C)&BIT(i))==0)		// wait to be empty
++						msleep(1);
++
++					SPI_write(1,i,0x00,0x20000030);			// PORT_RST
++					switch_pre_link[i]=LINK_DOWN;
++					switch_pre_speed[i]=GMAC_SPEED_10;
++					rcv_mask &= ~BIT(i);
++					SPI_write(2,0,0x10,rcv_mask);			// Disable Receive
++				}
++			}
++		}
++#endif
++		gmac_get_switch_status(dev);
++		gmac_write_reg(tp->base_addr, GMAC_STATUS, 0x7d, 0x0000007f);
++//		SPI_write(2,0,0x10,rcv_mask);			// Enable Receive
++		return ;
++	}
++#endif
++
++	reg_val = gmac_get_phy_vendor(tp->phy_addr);
++	printk("GMAC-%d Addr %d Vendor ID: 0x%08x\n", tp->port_id, tp->phy_addr, reg_val);
++
++	switch (tp->phy_mode)
++	{
++		case GMAC_PHY_GMII:
++		mii_write(tp->phy_addr,0x04,0x05e1); /* advertisement 100M full duplex, pause capable on */
++		#ifdef CONFIG_SL3516_ASIC
++		mii_write(tp->phy_addr,0x09,0x0300); /* advertise 1000M full/half duplex */
++		#else
++		mii_write(tp->phy_addr,0x09,0x0000); /* advertise no 1000M full/half duplex */
++		#endif
++		break;
++		case GMAC_PHY_RGMII_100:
++		mii_write(tp->phy_addr,0x04,0x05e1); /* advertisement 100M full duplex, pause capable on */
++		mii_write(tp->phy_addr,0x09,0x0000); /* advertise no 1000M */
++		break;
++		case GMAC_PHY_RGMII_1000:
++		mii_write(tp->phy_addr,0x04,0x05e1); /* advertisement 100M full duplex, pause capable on */
++		#ifdef CONFIG_SL3516_ASIC
++		mii_write(tp->phy_addr,0x09,0x0300); /* advertise 1000M full/half duplex */
++		#else
++		mii_write(tp->phy_addr,0x09,0x0000); /* advertise no 1000M full/half duplex */
++		#endif
++		break;
++		case GMAC_PHY_MII:
++		default:
++		mii_write(tp->phy_addr,0x04,0x05e1); /* advertisement 100M full duplex, pause capable on */
++		mii_write(tp->phy_addr,0x09,0x0000); /* advertise no 1000M */
++		break;
++	}
++
++	mii_write(tp->phy_addr,0x18,0x0041);	// Phy active led
++	if (tp->auto_nego_cfg)
++	{
++		reg_val = 0x1200 | (1 << 15);
++		mii_write(tp->phy_addr,0x00,reg_val); /* Enable and Restart Auto-Negotiation */
++		mdelay(500);
++		reg_val &= ~(1 << 15);
++		mii_write(tp->phy_addr, 0x00, reg_val);
++	}
++	else
++	{
++		reg_val = 0;
++		reg_val |= (tp->full_duplex_cfg) ? (1 << 8) : 0;
++		reg_val |= (tp->speed_cfg == GMAC_SPEED_1000) ? (1 << 6) : 0;
++		reg_val |= (tp->speed_cfg == GMAC_SPEED_100) ? (1 << 13) : 0;
++		mii_write(tp->phy_addr, 0x00, reg_val);
++		mdelay(100);
++
++		reg_val |= (1 << 15);	// Reset PHY;
++		mii_write(tp->phy_addr, 0x00, reg_val);
++	}
++
++	status.bits32 = 0;
++	/* set PHY operation mode */
++	status.bits.mii_rmii = tp->phy_mode;
++	status.bits.reserved = 1;
++	mdelay(100);
++	while (((reg_val=mii_read(tp->phy_addr,0x01)) & 0x00000004)!=0x04)
++	{
++		msleep(100);
++		i++;
++		if (i > 30)
++		break;
++	}
++	if (i>30)
++	{
++		tp->pre_phy_status = LINK_DOWN;
++		status.bits.link = LINK_DOWN;
++		//		clear_bit(__LINK_STATE_START, &dev->state);
++		printk("Link Down (0x%04x) ", reg_val);
++		if(Giga_switch == 1)
++		{
++				wan_port_id = 1;
++#ifdef CONFIG_SL351x_SYSCTL
++				storlink_ctl.link[ wan_port_id] = 0;
++#endif
++		}
++		else
++		{
++#ifdef CONFIG_SL351x_SYSCTL
++				storlink_ctl.link[ tp->port_id] = 0;
++#endif
++		}
++	}
++	else
++	{
++		tp->pre_phy_status = LINK_UP;
++		status.bits.link = LINK_UP;
++		//		set_bit(__LINK_STATE_START, &dev->state);
++		printk("Link Up (0x%04x) ",reg_val);
++		if(Giga_switch == 1)
++		{
++				wan_port_id = 1;
++#ifdef CONFIG_SL351x_SYSCTL
++				storlink_ctl.link[ wan_port_id] = 1;
++#endif
++		}
++		else
++		{
++#ifdef CONFIG_SL351x_SYSCTL
++				storlink_ctl.link[ tp->port_id] = 1;
++#endif
++		}
++	}
++	//    value = mii_read(PHY_ADDR,0x05);
++
++	ability = (mii_read(tp->phy_addr,0x05) & 0x05E0) >> 5;
++
++	//#ifdef CONFIG_SL3516_ASIC
++	reg_val = mii_read(tp->phy_addr,10);
++	printk("MII REG 10 = 0x%x\n",reg_val);
++
++	if ((reg_val & 0x0800) == 0x0800)
++	{
++		status.bits.duplex = 1;
++		status.bits.speed = 2;
++		if (status.bits.mii_rmii == GMAC_PHY_RGMII_100)
++		status.bits.mii_rmii = GMAC_PHY_RGMII_1000;
++
++		printk(" 1000M/Full \n");
++	}
++	else if ((reg_val & 0x0400) == 0x0400)
++	{
++		status.bits.duplex = 0;
++		status.bits.speed = 2;
++		if (status.bits.mii_rmii == GMAC_PHY_RGMII_100)
++		status.bits.mii_rmii = GMAC_PHY_RGMII_1000;
++
++		printk(" 1000M/Half \n");
++	}
++	//#endif
++	else
++	{
++		#ifdef CONFIG_SL3516_ASIC
++		if (status.bits.mii_rmii == GMAC_PHY_RGMII_1000)
++		status.bits.mii_rmii = GMAC_PHY_RGMII_100;
++		#endif
++		printk("MII REG 5 (bit 5:15) = 0x%x\n", ability);
++		if ((ability & 0x08)==0x08) /* 100M full duplex */
++		{
++			status.bits.duplex = 1;
++			status.bits.speed = 1;
++			printk(" 100M/Full\n");
++
++		}
++		else if ((ability & 0x04)==0x04) /* 100M half duplex */
++		{
++			status.bits.duplex = 0;
++			status.bits.speed = 1;
++			printk(" 100M/Half\n");
++
++		}
++		else if ((ability & 0x02)==0x02) /* 10M full duplex */
++		{
++			status.bits.duplex = 1;
++			status.bits.speed = 0;
++			printk(" 10M/Full\n");
++
++		}
++		else if ((ability & 0x01)==0x01) /* 10M half duplex */
++		{
++			status.bits.duplex = 0;
++			status.bits.speed = 0;
++			printk(" 10M/Half\n");
++
++		}
++	}
++	if ((ability & 0x20)==0x20)
++	{
++		tp->flow_control_enable = 1;
++		printk("Flow Control Enable.\n");
++	}
++	else
++	{
++		tp->flow_control_enable = 0;
++		printk("Flow Control Disable.\n");
++	}
++	tp->full_duplex_status = status.bits.duplex;
++	tp->speed_status = status.bits.speed;
++	if (!tp->auto_nego_cfg)
++	{
++		status.bits.duplex = tp->full_duplex_cfg;
++		status.bits.speed = tp->speed_cfg;
++	}
++	toe_gmac_disable_tx_rx(dev);
++	mdelay(10);
++	gmac_write_reg(tp->base_addr, GMAC_STATUS, status.bits32, 0x0000007f);
++	toe_gmac_enable_tx_rx(dev);
++}
++
++/*----------------------------------------------------------------------
++* gmac_phy_thread
++*----------------------------------------------------------------------*/
++static int gmac_phy_thread (void *data)
++{
++	struct net_device   *dev = data;
++	GMAC_INFO_T *tp = dev->priv;
++	unsigned long       timeout;
++
++    daemonize("%s", dev->name);
++	allow_signal(SIGTERM);
++//	reparent_to_init();
++//	spin_lock_irq(¤t->sigmask_lock);
++//	sigemptyset(¤t->blocked);
++//	recalc_sigpending(current);
++//	spin_unlock_irq(¤t->sigmask_lock);
++//	strncpy (current->comm, dev->name, sizeof(current->comm) - 1);
++//	current->comm[sizeof(current->comm) - 1] = '\0';
++
++	while (1)
++	{
++	    timeout = next_tick;
++		do
++		{
++			timeout = interruptible_sleep_on_timeout (&tp->thr_wait, timeout);
++		} while (!signal_pending (current) && (timeout > 0));
++
++		if (signal_pending (current))
++		{
++//			spin_lock_irq(¤t->sigmask_lock);
++			flush_signals(current);
++//			spin_unlock_irq(¤t->sigmask_lock);
++		}
++
++		if (tp->time_to_die)
++			break;
++
++		// printk("%s : Polling MAC %d PHY Status...\n",__func__, tp->port_id);
++		rtnl_lock ();
++		if (tp->auto_nego_cfg){
++#ifdef VITESSE_G5SWITCH
++        		if((tp->port_id == GMAC_PORT1)&&(Giga_switch==1))
++	        		gmac_get_switch_status(dev);
++        		else
++#endif
++        			gmac_get_phy_status(dev); //temp remove
++        	}
++		rtnl_unlock ();
++	}
++	complete_and_exit (&tp->thr_exited, 0);
++}
++
++/*----------------------------------------------------------------------
++* gmac_get_switch_status
++*----------------------------------------------------------------------*/
++#ifdef VITESSE_G5SWITCH
++void gmac_get_switch_status(struct net_device *dev)
++{
++	GMAC_INFO_T *tp = dev->priv;
++	GMAC_CONFIG0_T	config0,config0_mask;
++	unsigned int	switch_port_id;
++	int get_link=0;
++
++	get_link = Get_Set_port_status();
++	if(get_link){				// link
++		if(ever_dwon){
++			ever_dwon = 0;
++			toe_gmac_enable_tx_rx(dev);
++			netif_wake_queue(dev);
++			set_bit(__LINK_STATE_START, &dev->state);
++		}
++	}
++	else{					// all down
++		//printk("All link down\n");
++		ever_dwon=1;
++		netif_stop_queue(dev);
++		toe_gmac_disable_tx_rx(dev);
++		clear_bit(__LINK_STATE_START, &dev->state);
++	}
++
++	if ( tp->port_id == 1 )
++		switch_port_id = 0;
++#ifdef CONFIG_SL351x_SYSCTL
++	if (get_link)
++	{
++		storlink_ctl.link[switch_port_id] = 1;
++	}
++	else
++	{
++		storlink_ctl.link[switch_port_id] = 0;
++	}
++	if (storlink_ctl.pauseoff == 1)
++		{
++			if (tp->flow_control_enable == 1)
++			{
++				config0.bits32 = 0;
++				config0_mask.bits32 = 0;
++				config0.bits.tx_fc_en = 0; /* disable tx flow control */
++				config0.bits.rx_fc_en = 0; /* disable rx flow control */
++				config0_mask.bits.tx_fc_en = 1;
++				config0_mask.bits.rx_fc_en = 1;
++				gmac_write_reg(tp->base_addr, GMAC_CONFIG0,config0.bits32,config0_mask.bits32);
++				printk("Disable SWITCH Flow Control...\n");
++			}
++				tp->flow_control_enable = 0;
++		}
++		else
++#endif
++		{
++			if (tp->flow_control_enable == 0)
++			{
++				config0.bits32 = 0;
++				config0_mask.bits32 = 0;
++				config0.bits.tx_fc_en = 1; /* enable tx flow control */
++				config0.bits.rx_fc_en = 1; /* enable rx flow control */
++				config0_mask.bits.tx_fc_en = 1;
++				config0_mask.bits.rx_fc_en = 1;
++				gmac_write_reg(tp->base_addr, GMAC_CONFIG0,config0.bits32,config0_mask.bits32);
++				printk("Enable SWITCH Flow Control...\n");
++			}
++			tp->flow_control_enable = 1;
++		}
++	return ;
++
++}
++#endif
++
++/*----------------------------------------------------------------------
++* gmac_get_phy_status
++*----------------------------------------------------------------------*/
++void gmac_get_phy_status(struct net_device *dev)
++{
++	GMAC_INFO_T *tp = dev->priv;
++	GMAC_CONFIG0_T	config0,config0_mask;
++	GMAC_STATUS_T   status, old_status;
++	unsigned int    reg_val,ability,wan_port_id;
++
++	old_status.bits32 = status.bits32 = gmac_read_reg(tp->base_addr, GMAC_STATUS);
++
++
++	/* read PHY status register */
++	reg_val = mii_read(tp->phy_addr,0x01);
++	if ((reg_val & 0x0024) == 0x0024) /* link is established and auto_negotiate process completed */
++	{
++		ability = (mii_read(tp->phy_addr,0x05) & 0x05E0) >> 5;
++		/* read PHY Auto-Negotiation Link Partner Ability Register */
++		#ifdef CONFIG_SL3516_ASIC
++		reg_val = mii_read(tp->phy_addr,10);
++		if ((reg_val & 0x0800) == 0x0800)
++		{
++			status.bits.duplex = 1;
++			status.bits.speed = 2;
++			if (status.bits.mii_rmii == GMAC_PHY_RGMII_100)
++			status.bits.mii_rmii = GMAC_PHY_RGMII_1000;
++		}
++		else if ((reg_val & 0x0400) == 0x0400)
++		{
++			status.bits.duplex = 0;
++			status.bits.speed = 2;
++			if (status.bits.mii_rmii == GMAC_PHY_RGMII_100)
++			status.bits.mii_rmii = GMAC_PHY_RGMII_1000;
++		}
++		else
++		#endif
++		{
++			#ifdef CONFIG_SL3516_ASIC
++			if (status.bits.mii_rmii == GMAC_PHY_RGMII_1000)
++			status.bits.mii_rmii = GMAC_PHY_RGMII_100;
++			#endif
++			if ((ability & 0x08)==0x08) /* 100M full duplex */
++			{
++				status.bits.duplex = 1;
++				status.bits.speed = 1;
++			}
++			else if ((ability & 0x04)==0x04) /* 100M half duplex */
++			{
++				status.bits.duplex = 0;
++				status.bits.speed = 1;
++			}
++			else if ((ability & 0x02)==0x02) /* 10M full duplex */
++			{
++				status.bits.duplex = 1;
++				status.bits.speed = 0;
++			}
++			else if ((ability & 0x01)==0x01) /* 10M half duplex */
++			{
++				status.bits.duplex = 0;
++				status.bits.speed = 0;
++			}
++		}
++		status.bits.link = LINK_UP; /* link up */
++		if(Giga_switch==1)
++		{
++				wan_port_id = 1;
++#ifdef CONFIG_SL351x_SYSCTL
++				storlink_ctl.link[ wan_port_id] = 1;
++		}
++		else
++		{
++				storlink_ctl.link[ tp->port_id] = 1;
++#endif
++		}
++		if ((ability & 0x20)==0x20)
++		{
++			if (tp->flow_control_enable == 0)
++			{
++				config0.bits32 = 0;
++				config0_mask.bits32 = 0;
++				config0.bits.tx_fc_en = 1; /* enable tx flow control */
++				config0.bits.rx_fc_en = 1; /* enable rx flow control */
++				config0_mask.bits.tx_fc_en = 1;
++				config0_mask.bits.rx_fc_en = 1;
++				gmac_write_reg(tp->base_addr, GMAC_CONFIG0,config0.bits32,config0_mask.bits32);
++				printk("GMAC-%d Flow Control Enable.\n", tp->port_id);
++			}
++			tp->flow_control_enable = 1;
++		}
++		else
++		{
++			if (tp->flow_control_enable == 1)
++			{
++				config0.bits32 = 0;
++				config0_mask.bits32 = 0;
++				config0.bits.tx_fc_en = 0; /* disable tx flow control */
++				config0.bits.rx_fc_en = 0; /* disable rx flow control */
++				config0_mask.bits.tx_fc_en = 1;
++				config0_mask.bits.rx_fc_en = 1;
++				gmac_write_reg(tp->base_addr, GMAC_CONFIG0,config0.bits32,config0_mask.bits32);
++				printk("GMAC-%d Flow Control Disable.\n", tp->port_id);
++			}
++			tp->flow_control_enable = 0;
++		}
++
++		if (tp->pre_phy_status == LINK_DOWN)
++		{
++			printk("GMAC-%d LINK_UP......\n",tp->port_id);
++			tp->pre_phy_status = LINK_UP;
++		}
++	}
++	else
++	{
++		status.bits.link = LINK_DOWN; /* link down */
++		if(Giga_switch == 1)
++		{
++				wan_port_id = 1;
++#ifdef CONFIG_SL351x_SYSCTL
++				storlink_ctl.link[ wan_port_id] = 0;
++		}
++		else
++		{
++				storlink_ctl.link[ tp->port_id] = 0;
++#endif
++		}
++		if (tp->pre_phy_status == LINK_UP)
++		{
++			printk("GMAC-%d LINK_Down......\n",tp->port_id);
++			tp->pre_phy_status = LINK_DOWN;
++		}
++	}
++
++	tp->full_duplex_status = status.bits.duplex;
++	tp->speed_status = status.bits.speed;
++	if (!tp->auto_nego_cfg)
++	{
++		status.bits.duplex = tp->full_duplex_cfg;
++		status.bits.speed = tp->speed_cfg;
++	}
++
++	if (old_status.bits32 != status.bits32)
++	{
++		netif_stop_queue(dev);
++		toe_gmac_disable_tx_rx(dev);
++		clear_bit(__LINK_STATE_START, &dev->state);
++		printk("GMAC-%d Change Status Bits 0x%x-->0x%x\n",tp->port_id, old_status.bits32, status.bits32);
++		mdelay(10); // let GMAC consume packet
++		gmac_write_reg(tp->base_addr, GMAC_STATUS, status.bits32, 0x0000007f);
++		if (status.bits.link == LINK_UP)
++		{
++			toe_gmac_enable_tx_rx(dev);
++			netif_wake_queue(dev);
++			set_bit(__LINK_STATE_START, &dev->state);
++		}
++	}
++}
++
++/***************************************/
++/* define GPIO module base address     */
++/***************************************/
++#define GPIO_BASE_ADDR  (IO_ADDRESS(SL2312_GPIO_BASE))
++#define GPIO_BASE_ADDR1  (IO_ADDRESS(SL2312_GPIO_BASE1))
++
++/* define GPIO pin for MDC/MDIO */
++#ifdef CONFIG_SL3516_ASIC
++#define H_MDC_PIN           22
++#define H_MDIO_PIN          21
++#define G_MDC_PIN           22
++#define G_MDIO_PIN          21
++#else
++#define H_MDC_PIN           3
++#define H_MDIO_PIN          2
++#define G_MDC_PIN           0
++#define G_MDIO_PIN          1
++#endif
++
++//#define GPIO_MDC             0x80000000
++//#define GPIO_MDIO            0x00400000
++
++static unsigned int GPIO_MDC = 0;
++static unsigned int GPIO_MDIO = 0;
++static unsigned int GPIO_MDC_PIN = 0;
++static unsigned int GPIO_MDIO_PIN = 0;
++
++// For PHY test definition!!
++#define LPC_EECK		0x02
++#define LPC_EDIO		0x04
++#define LPC_GPIO_SET		3
++#define LPC_BASE_ADDR		IO_ADDRESS(IT8712_IO_BASE)
++#define inb_gpio(x)		inb(LPC_BASE_ADDR + IT8712_GPIO_BASE + x)
++#define outb_gpio(x, y)		outb(y, LPC_BASE_ADDR + IT8712_GPIO_BASE + x)
++
++enum GPIO_REG
++{
++    GPIO_DATA_OUT   = 0x00,
++    GPIO_DATA_IN    = 0x04,
++    GPIO_PIN_DIR    = 0x08,
++    GPIO_BY_PASS    = 0x0c,
++    GPIO_DATA_SET   = 0x10,
++    GPIO_DATA_CLEAR = 0x14,
++};
++/***********************/
++/*    MDC : GPIO[31]   */
++/*    MDIO: GPIO[22]   */
++/***********************/
++
++/***************************************************
++* All the commands should have the frame structure:
++*

++****************************************************/
++
++/*****************************************************************
++* Inject a bit to NWay register through CSR9_MDC,MDIO
++*******************************************************************/
++void mii_serial_write(char bit_MDO) // write data into mii PHY
++{
++#ifdef CONFIG_SL2312_LPC_IT8712
++	unsigned char iomode,status;
++
++	iomode = LPCGetConfig(LDN_GPIO, 0xc8 + LPC_GPIO_SET);
++	iomode |= (LPC_EECK|LPC_EDIO) ;				// Set EECK,EDIO,EECS output
++	LPCSetConfig(LDN_GPIO, 0xc8 + LPC_GPIO_SET, iomode);
++
++	if(bit_MDO)
++	{
++		status = inb_gpio( LPC_GPIO_SET);
++		status |= LPC_EDIO ;		//EDIO high
++		outb_gpio(LPC_GPIO_SET, status);
++	}
++	else
++	{
++		status = inb_gpio( LPC_GPIO_SET);
++		status &= ~(LPC_EDIO) ;		//EDIO low
++		outb_gpio(LPC_GPIO_SET, status);
++	}
++
++	status |= LPC_EECK ;		//EECK high
++	outb_gpio(LPC_GPIO_SET, status);
++
++	status &= ~(LPC_EECK) ;		//EECK low
++	outb_gpio(LPC_GPIO_SET, status);
++
++#else
++    unsigned int addr;
++    unsigned int value;
++
++    addr = GPIO_BASE_ADDR + GPIO_PIN_DIR;
++    value = readl(addr) | GPIO_MDC | GPIO_MDIO; /* set MDC/MDIO Pin to output */
++    writel(value,addr);
++    if(bit_MDO)
++    {
++        addr = (GPIO_BASE_ADDR + GPIO_DATA_SET);
++        writel(GPIO_MDIO,addr); /* set MDIO to 1 */
++        addr = (GPIO_BASE_ADDR + GPIO_DATA_SET);
++        writel(GPIO_MDC,addr); /* set MDC to 1 */
++        addr = (GPIO_BASE_ADDR + GPIO_DATA_CLEAR);
++        writel(GPIO_MDC,addr); /* set MDC to 0 */
++    }
++    else
++    {
++        addr = (GPIO_BASE_ADDR + GPIO_DATA_CLEAR);
++        writel(GPIO_MDIO,addr); /* set MDIO to 0 */
++        addr = (GPIO_BASE_ADDR + GPIO_DATA_SET);
++        writel(GPIO_MDC,addr); /* set MDC to 1 */
++        addr = (GPIO_BASE_ADDR + GPIO_DATA_CLEAR);
++        writel(GPIO_MDC,addr); /* set MDC to 0 */
++    }
++
++#endif
++}
++
++/**********************************************************************
++* read a bit from NWay register through CSR9_MDC,MDIO
++***********************************************************************/
++unsigned int mii_serial_read(void) // read data from mii PHY
++{
++#ifdef CONFIG_SL2312_LPC_IT8712
++  	unsigned char iomode,status;
++	unsigned int value ;
++
++	iomode = LPCGetConfig(LDN_GPIO, 0xc8 + LPC_GPIO_SET);
++	iomode &= ~(LPC_EDIO) ;		// Set EDIO input
++	iomode |= (LPC_EECK) ;		// Set EECK,EECS output
++	LPCSetConfig(LDN_GPIO, 0xc8 + LPC_GPIO_SET, iomode);
++
++	status = inb_gpio( LPC_GPIO_SET);
++	status |= LPC_EECK ;		//EECK high
++	outb_gpio(LPC_GPIO_SET, status);
++
++	status &= ~(LPC_EECK) ;		//EECK low
++	outb_gpio(LPC_GPIO_SET, status);
++
++	value = inb_gpio( LPC_GPIO_SET);
++
++	value = value>>2 ;
++	value &= 0x01;
++
++	return value ;
++
++#else
++    unsigned int *addr;
++    unsigned int value;
++
++    addr = (unsigned int *)(GPIO_BASE_ADDR + GPIO_PIN_DIR);
++    value = readl(addr) & ~GPIO_MDIO; //0xffbfffff;   /* set MDC to output and MDIO to input */
++    writel(value,addr);
++
++    addr = (unsigned int *)(GPIO_BASE_ADDR + GPIO_DATA_SET);
++    writel(GPIO_MDC,addr); /* set MDC to 1 */
++    addr = (unsigned int *)(GPIO_BASE_ADDR + GPIO_DATA_CLEAR);
++    writel(GPIO_MDC,addr); /* set MDC to 0 */
++
++    addr = (unsigned int *)(GPIO_BASE_ADDR + GPIO_DATA_IN);
++    value = readl(addr);
++    value = (value & (1<> GPIO_MDIO_PIN;
++    return(value);
++
++#endif
++}
++
++/***************************************
++* preamble + ST
++***************************************/
++void mii_pre_st(void)
++{
++    unsigned char i;
++
++    for(i=0;i<32;i++) // PREAMBLE
++        mii_serial_write(1);
++    mii_serial_write(0); // ST
++    mii_serial_write(1);
++}
++
++
++/******************************************
++* Read MII register
++* phyad -> physical address
++* regad -> register address
++***************************************** */
++unsigned int mii_read(unsigned char phyad,unsigned char regad)
++{
++    unsigned int i,value;
++    unsigned int bit;
++
++    if (phyad == GPHY_ADDR)
++    {
++        GPIO_MDC_PIN = G_MDC_PIN;   /* assigned MDC pin for giga PHY */
++        GPIO_MDIO_PIN = G_MDIO_PIN; /* assigned MDIO pin for giga PHY */
++    }
++    else
++    {
++        GPIO_MDC_PIN = H_MDC_PIN;   /* assigned MDC pin for 10/100 PHY */
++        GPIO_MDIO_PIN = H_MDIO_PIN; /* assigned MDIO pin for 10/100 PHY */
++    }
++    GPIO_MDC = (1<>(4-i)) & 0x01) ? 1 :0 ;
++        mii_serial_write(bit);
++    }
++
++    for (i=0;i<5;i++) { // REGAD
++        bit= ((regad>>(4-i)) & 0x01) ? 1 :0 ;
++        mii_serial_write(bit);
++    }
++
++    mii_serial_read(); // TA_Z
++//    if((bit=mii_serial_read()) !=0 ) // TA_0
++//    {
++//        return(0);
++//    }
++    value=0;
++    for (i=0;i<16;i++) { // READ DATA
++        bit=mii_serial_read();
++        value += (bit<<(15-i)) ;
++    }
++
++    mii_serial_write(0); // dumy clock
++    mii_serial_write(0); // dumy clock
++
++	//printk("%s: phy_addr=0x%x reg_addr=0x%x value=0x%x \n",__func__,phyad,regad,value);
++    return(value);
++}
++
++/******************************************
++* Write MII register
++* phyad -> physical address
++* regad -> register address
++* value -> value to be write
++***************************************** */
++void mii_write(unsigned char phyad,unsigned char regad,unsigned int value)
++{
++    unsigned int i;
++    char bit;
++
++	printk("%s: phy_addr=0x%x reg_addr=0x%x value=0x%x \n",__func__,phyad,regad,value);
++    if (phyad == GPHY_ADDR)
++    {
++        GPIO_MDC_PIN = G_MDC_PIN;   /* assigned MDC pin for giga PHY */
++        GPIO_MDIO_PIN = G_MDIO_PIN; /* assigned MDIO pin for giga PHY */
++    }
++    else
++    {
++        GPIO_MDC_PIN = H_MDC_PIN;   /* assigned MDC pin for 10/100 PHY */
++        GPIO_MDIO_PIN = H_MDIO_PIN; /* assigned MDIO pin for 10/100 PHY */
++    }
++    GPIO_MDC = (1<>(4-i)) & 0x01) ? 1 :0 ;
++        mii_serial_write(bit);
++    }
++
++    for (i=0;i<5;i++) { // REGAD
++        bit= ((regad>>(4-i)) & 0x01) ? 1 :0 ;
++        mii_serial_write(bit);
++    }
++    mii_serial_write(1); // TA_1
++    mii_serial_write(0); // TA_0
++
++    for (i=0;i<16;i++) { // OUT DATA
++        bit= ((value>>(15-i)) & 0x01) ? 1 : 0 ;
++        mii_serial_write(bit);
++    }
++    mii_serial_write(0); // dumy clock
++    mii_serial_write(0); // dumy clock
++}
++
++/*----------------------------------------------------------------------
++* gmac_set_rx_mode
++*----------------------------------------------------------------------*/
++static void gmac_set_rx_mode(struct net_device *dev)
++{
++    GMAC_RX_FLTR_T      filter;
++	unsigned int        mc_filter[2];	/* Multicast hash filter */
++    int                 bit_nr;
++	unsigned int        i;
++	GMAC_INFO_T 		*tp = dev->priv;
++
++//    printk("%s : dev->flags = %x \n",__func__,dev->flags);
++//    dev->flags |= IFF_ALLMULTI;  /* temp */
++    filter.bits32 = 0;
++    filter.bits.error = 0;
++	if (dev->flags & IFF_PROMISC)
++	{
++	    filter.bits.error = 1;
++        filter.bits.promiscuous = 1;
++        filter.bits.broadcast = 1;
++        filter.bits.multicast = 1;
++        filter.bits.unicast = 1;
++		mc_filter[1] = mc_filter[0] = 0xffffffff;
++	}
++	else if (dev->flags & IFF_ALLMULTI)
++	{
++//        filter.bits.promiscuous = 1;
++        filter.bits.broadcast = 1;
++        filter.bits.multicast = 1;
++        filter.bits.unicast = 1;
++		mc_filter[1] = mc_filter[0] = 0xffffffff;
++	}
++	else
++	{
++		struct dev_mc_list *mclist;
++
++//        filter.bits.promiscuous = 1;
++        filter.bits.broadcast = 1;
++        filter.bits.multicast = 1;
++        filter.bits.unicast = 1;
++		mc_filter[1] = mc_filter[0] = 0;
++		for (i = 0, mclist = dev->mc_list; mclist && i < dev->mc_count;i++, mclist = mclist->next)
++		{
++            bit_nr = ether_crc(ETH_ALEN,mclist->dmi_addr) & 0x0000003f;
++            if (bit_nr < 32)
++            {
++                mc_filter[0] = mc_filter[0] | (1<base_addr,GMAC_RX_FLTR,filter.bits32,0xffffffff);  //chech base address!!!
++    gmac_write_reg(tp->base_addr,GMAC_MCAST_FIL0,mc_filter[0],0xffffffff);
++    gmac_write_reg(tp->base_addr,GMAC_MCAST_FIL1,mc_filter[1],0xffffffff);
++    return;
++}
++
++#ifdef CONFIG_SL_NAPI
++/*----------------------------------------------------------------------
++* gmac_rx_poll
++*----------------------------------------------------------------------*/
++static int gmac_rx_poll(struct net_device *dev, int *budget)
++{
++	TOE_INFO_T			*toe;
++    GMAC_RXDESC_T   	*curr_desc;
++	struct sk_buff 		*skb;
++    DMA_RWPTR_T			rwptr;
++	unsigned int 		pkt_size;
++	unsigned int        desc_count;
++	unsigned int        good_frame, chksum_status, rx_status;
++	int                 rx_pkts_num = 0;
++	int                 quota = min(dev->quota, *budget);
++	GMAC_INFO_T			*tp = (GMAC_INFO_T *)dev->priv;
++	unsigned int		status4;
++	volatile DMA_RWPTR_T	fq_rwptr;
++	int					max_cnt = TOE_SW_FREEQ_DESC_NUM;//TOE_SW_FREEQ_DESC_NUM = 64
++	//unsigned long		rx_old_bytes;
++	struct net_device_stats *isPtr = (struct net_device_stats *)&tp->ifStatics;
++	//unsigned long long	rx_time;
++
++
++
++#if 1
++	if (do_again)
++	{
++			toe_gmac_fill_free_q();
++			status4 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_STATUS_4_REG);
++			fq_rwptr.bits32 = readl(TOE_GLOBAL_BASE + GLOBAL_SWFQ_RWPTR_REG);
++			//printk("\n%s:: do_again toe_gmac_fill_free_q =======>status4=0x%x =====fq_rwptr =0x%8x======>JKJKJKJKJKJKJKJKJ \n", __func__,status4,fq_rwptr.bits32);
++			if (fq_rwptr.bits.wptr != fq_rwptr.bits.rptr)
++			{
++						//status4 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_STATUS_4_REG);
++						do_again =0;
++						//netif_rx_complete(dev);
++						gmac_write_reg(TOE_GLOBAL_BASE, GLOBAL_INTERRUPT_STATUS_4_REG, status4,	0x1);
++						fq_rwptr.bits32 = readl(TOE_GLOBAL_BASE + GLOBAL_SWFQ_RWPTR_REG);
++						rwptr.bits32 = readl(&tp->default_qhdr->word1);
++			}
++			else
++				return 1;
++	}
++#endif
++	rwptr.bits32 = readl(&tp->default_qhdr->word1);
++#if 0
++	if (rwptr.bits.rptr != tp->rx_rwptr.bits.rptr)
++	{
++		mac_stop_txdma((struct net_device *)tp->dev);
++		printk("Default Queue HW RD ptr (0x%x) != SW RD Ptr (0x%x)\n",
++				rwptr.bits32, tp->rx_rwptr.bits.rptr);
++		while(1);
++	}
++#endif
++	toe = (TOE_INFO_T *)&toe_private_data;
++
++	fq_rwptr.bits32 = readl(TOE_GLOBAL_BASE + GLOBAL_SWFQ_RWPTR_REG);
++	//printk("%s:---Before-------------->Default Queue HW RW ptr (0x%8x),   fq_rwptr =0x%8x \n",__func__,rwptr.bits32,fq_rwptr.bits32 );
++	//printk("%s:---Before while   rx_pkts_num=%d------rx_finished_idx=0x%x------->Default_Q [rwptr.bits.rptr(SW)=0x%x,   rwptr.bits.wptr(HW) = 0x%x ]---->Free_Q(SW_HW) = 0x%8x \n",__func__,rx_pkts_num,rx_finished_idx,rwptr.bits.rptr,rwptr.bits.wptr,fq_rwptr.bits32 );
++//	while ((--max_cnt) && (rwptr.bits.rptr != rwptr.bits.wptr) && (rx_pkts_num < quota))
++
++	while ((rwptr.bits.rptr != rwptr.bits.wptr) && (rx_pkts_num < quota))
++	{
++
++    	curr_desc = (GMAC_RXDESC_T *)tp->default_desc_base + rwptr.bits.rptr;
++		tp->default_q_cnt++;
++    	tp->rx_curr_desc = (unsigned int)curr_desc;
++    	rx_status = curr_desc->word0.bits.status;
++    	chksum_status = curr_desc->word0.bits.chksum_status;
++    	tp->rx_status_cnt[rx_status]++;
++    	tp->rx_chksum_cnt[chksum_status]++;
++        pkt_size = curr_desc->word1.bits.byte_count;  /*total byte count in a frame*/
++		desc_count = curr_desc->word0.bits.desc_count; /* get descriptor count per frame */
++		good_frame=1;
++		if ((curr_desc->word0.bits32 & (GMAC_RXDESC_0_T_derr | GMAC_RXDESC_0_T_perr))
++			|| (pkt_size < 60)
++		    || (chksum_status & 0x4)
++		    || rx_status )
++//			|| rx_status || (rwptr.bits.rptr > rwptr.bits.wptr ))
++		{
++			good_frame = 0;
++			if (curr_desc->word0.bits32 & GMAC_RXDESC_0_T_derr)
++				printk("%s::derr (GMAC-%d)!!!\n", __func__, tp->port_id);
++			if (curr_desc->word0.bits32 & GMAC_RXDESC_0_T_perr)
++				printk("%s::perr (GMAC-%d)!!!\n", __func__, tp->port_id);
++			if (rx_status)
++			{
++				if (rx_status == 4 || rx_status == 7)
++					isPtr->rx_crc_errors++;
++//				printk("%s::Status=%d (GMAC-%d)!!!\n", __func__, rx_status, tp->port_id);
++			}
++#ifdef SL351x_GMAC_WORKAROUND
++			else if (pkt_size < 60)
++			{
++				if (tp->short_frames_cnt < GMAC_SHORT_FRAME_THRESHOLD)
++					tp->short_frames_cnt++;
++				if (tp->short_frames_cnt >= GMAC_SHORT_FRAME_THRESHOLD)
++				{
++					GMAC_CONFIG0_T config0;
++					config0.bits32 = readl(TOE_GMAC0_BASE+GMAC_CONFIG0);
++					config0.bits.dis_rx = 1;
++					writel(config0.bits32, TOE_GMAC0_BASE+GMAC_CONFIG0);
++					config0.bits32 = readl(TOE_GMAC1_BASE+GMAC_CONFIG0);
++					config0.bits.dis_rx = 1;
++					writel(config0.bits32, TOE_GMAC1_BASE+GMAC_CONFIG0);
++				}
++			}
++#endif
++//			if (chksum_status)
++//				printk("%s::Checksum Status=%d (GMAC-%d)!!!\n", __func__, chksum_status, tp->port_id);
++			skb = (struct sk_buff *)(REG32(__va(curr_desc->word2.buf_adr) - SKB_RESERVE_BYTES));
++			dev_kfree_skb_irq(skb);
++		}
++		if (good_frame)
++		{
++			if (curr_desc->word0.bits.drop)
++				printk("%s::Drop (GMAC-%d)!!!\n", __func__, tp->port_id);
++//			if (chksum_status)
++//				printk("%s::Checksum Status=%d (GMAC-%d)!!!\n", __func__, chksum_status, tp->port_id);
++
++#ifdef SL351x_GMAC_WORKAROUND
++			if (tp->short_frames_cnt >= GMAC_SHORT_FRAME_THRESHOLD)
++			{
++				GMAC_CONFIG0_T config0;
++				config0.bits32 = readl(TOE_GMAC0_BASE+GMAC_CONFIG0);
++				config0.bits.dis_rx = 0;
++				writel(config0.bits32, TOE_GMAC0_BASE+GMAC_CONFIG0);
++				config0.bits32 = readl(TOE_GMAC1_BASE+GMAC_CONFIG0);
++				config0.bits.dis_rx = 0;
++				writel(config0.bits32, TOE_GMAC1_BASE+GMAC_CONFIG0);
++			}
++			tp->short_frames_cnt = 0;
++#endif
++	    	/* get frame information from the first descriptor of the frame */
++			isPtr->rx_packets++;
++			//consistent_sync((void *)__va(curr_desc->word2.buf_adr), pkt_size, PCI_DMA_FROMDEVICE);
++			skb = (struct sk_buff *)(REG32(__va(curr_desc->word2.buf_adr) - SKB_RESERVE_BYTES));
++			tp->curr_rx_skb = skb;
++	//		curr_desc->word2.buf_adr = 0;
++
++		    //skb_reserve (skb, SKB_RESERVE_BYTES);
++			skb_reserve (skb, RX_INSERT_BYTES);	/* 2 byte align the IP fields. */
++			//if ((skb->tail+pkt_size) > skb->end )
++			//printk("%s::------------->Here skb->len=%d,pkt_size= %d,skb->head=0x%x,skb->tail= 0x%x, skb->end= 0x%x\n", __func__, skb->len, pkt_size,skb->head,skb->tail,skb->end);
++			skb_put(skb, pkt_size);
++
++
++			skb->dev = dev;
++			if (chksum_status == RX_CHKSUM_IP_UDP_TCP_OK)
++			{
++				skb->ip_summed = CHECKSUM_UNNECESSARY;
++#ifdef CONFIG_SL351x_NAT
++				if (nat_cfg.enabled && curr_desc->word3.bits.l3_offset && curr_desc->word3.bits.l4_offset)
++				{
++					struct iphdr	*ip_hdr;
++					ip_hdr = (struct iphdr *)&(skb->data[curr_desc->word3.bits.l3_offset]);
++					sl351x_nat_input(skb,
++									tp->port_id,
++									(void *)curr_desc->word3.bits.l3_offset,
++								  	(void *)curr_desc->word3.bits.l4_offset);
++				}
++#endif
++				skb->protocol = eth_type_trans(skb,dev); /* set skb protocol */
++#if 0
++#ifdef CONFIG_SL351x_RXTOE
++				if (storlink_ctl.rx_max_pktsize) {
++					struct iphdr	*ip_hdr;
++					struct tcphdr	*tcp_hdr;
++					int ip_hdrlen;
++
++ 					ip_hdr = (struct iphdr*)&(skb->data[0]);
++					if ((skb->protocol == __constant_htons(ETH_P_IP)) &&
++					   ((ip_hdr->protocol & 0x00ff) == IPPROTO_TCP)) {
++						ip_hdrlen = ip_hdr->ihl << 2;
++						tcp_hdr = (struct tcphdr*)&(skb->data[ip_hdrlen]);
++						if (tcp_hdr->syn) {
++							struct toe_conn* connection = init_toeq(ip_hdr->version,
++									ip_hdr, tcp_hdr, toe, &(skb->data[0]) - 14);
++							TCP_SKB_CB(skb)->connection = connection;
++							//	hash_dump_entry(TCP_SKB_CB(skb)->connection->hash_entry_index);
++							//		printk("%s::skb data %x, conn %x, mode %x\n",
++							//			__func__, skb->data, connection, connection->mode);
++						}
++					}
++				}
++#endif
++#endif
++			}
++			else if (chksum_status == RX_CHKSUM_IP_OK_ONLY)
++			{
++				skb->ip_summed = CHECKSUM_UNNECESSARY;
++#ifdef CONFIG_SL351x_NAT
++				if (nat_cfg.enabled && curr_desc->word3.bits.l3_offset && curr_desc->word3.bits.l4_offset)
++				{
++					struct iphdr	*ip_hdr;
++					ip_hdr = (struct iphdr *)&(skb->data[curr_desc->word3.bits.l3_offset]);
++					if (ip_hdr->protocol == IPPROTO_UDP)
++					{
++						sl351x_nat_input(skb,
++										tp->port_id,
++										(void *)curr_desc->word3.bits.l3_offset,
++								  		(void *)curr_desc->word3.bits.l4_offset);
++					}
++					else if (ip_hdr->protocol == IPPROTO_GRE)
++					{
++						sl351x_nat_input(skb,
++									tp->port_id,
++									(void *)curr_desc->word3.bits.l3_offset,
++								  	(void *)curr_desc->word3.bits.l4_offset);
++					}
++				}
++#endif
++				skb->protocol = eth_type_trans(skb,dev); /* set skb protocol */
++			}
++			else
++			{
++				skb->protocol = eth_type_trans(skb,dev); /* set skb protocol */
++			}
++			//netif_rx(skb);  /* socket rx */
++			netif_receive_skb(skb); //For NAPI
++			dev->last_rx = jiffies;
++
++			isPtr->rx_bytes += pkt_size;
++			//printk("------------------->isPtr->rx_bytes = %d\n",isPtr->rx_bytes);
++
++
++        }
++		// advance one for Rx default Q 0/1
++		rwptr.bits.rptr = RWPTR_ADVANCE_ONE(rwptr.bits.rptr, tp->default_desc_num);
++		SET_RPTR(&tp->default_qhdr->word1, rwptr.bits.rptr);
++     	tp->rx_rwptr.bits32 = rwptr.bits32;
++		rx_pkts_num++;
++		//rwptr.bits32 = readl(&tp->default_qhdr->word1);//try read default_qhdr again
++		//fq_rwptr.bits32 = readl(TOE_GLOBAL_BASE + GLOBAL_SWFQ_RWPTR_REG);
++		//printk("%s:---Loop  -------->rx_pkts_num=%d------------>Default Queue HW RW ptr = (0x%8x),   fq_rwptr =0x%8x \n",__func__,rx_pkts_num,rwptr.bits32,fq_rwptr.bits32 );
++#if 0
++		if ((status4 & 0x1) == 0)
++		{
++			//if (!((dev->last_rx <= (rx_time + 2)) &&  (isPtr->rx_bytes > (rx_old_bytes + 1000000 ))))
++			if (tp->total_q_cnt_napi < 1024)
++			{
++				tp->total_q_cnt_napi++;
++				toe_gmac_fill_free_q();  //for iperf test disable
++			}
++			//else
++				//printk("%s:---isPtr->rx_bytes =%u , rx_old_bytes =%u\n",__func__,isPtr->rx_bytes,rx_old_bytes );
++
++		}
++#endif
++		//rwptr.bits.rptr = RWPTR_ADVANCE_ONE(rwptr.bits.rptr, tp->default_desc_num);
++		//printk("%s:---Loop  -------->rx_pkts_num=%d----rwptr.bits.rptr=0x%x-------->Default Queue HW RW ptr = (0x%8x),   fq_rwptr =0x%8x \n",__func__,rx_pkts_num,rwptr.bits.rptr,rwptr.bits32,fq_rwptr.bits32 );
++		//printk("%s:---Loop  rx_pkts_num=%d------rwptr.bits.rptr=0x%x------->Default_Q [rwptr.bits.rptr(SW)=0x%x,   rwptr.bits.wptr(HW) = 0x%x ]---->Free_Q(SW_HW) = 0x%8x \n",__func__,rx_pkts_num,rwptr.bits.rptr,rwptr.bits.rptr,rwptr.bits.wptr,fq_rwptr.bits32 );
++	}
++	// advance one for Rx default Q 0/1
++
++		//rwptr.bits.rptr = RWPTR_ADVANCE_ONE(rwptr.bits.rptr, tp->default_desc_num);
++		//SET_RPTR(&tp->default_qhdr->word1, rwptr.bits.rptr);
++     	//tp->rx_rwptr.bits32 = rwptr.bits32;
++     	//rwptr.bits.rptr = rwptr.bits.rptr;
++
++	dev->quota -= rx_pkts_num;
++	*budget -= rx_pkts_num;
++
++	status4 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_STATUS_4_REG);//try read SWFQ empty again
++	//fq_rwptr.bits32 = readl(TOE_GLOBAL_BASE + GLOBAL_SWFQ_RWPTR_REG);
++	rwptr.bits32 = readl(&tp->default_qhdr->word1); //try read default_qhdr again
++	//printk("%s:---After    rx_pkts_num=%d------rwptr.bits.rptr=0x%x------->Default_Q [rwptr.bits.rptr(SW)=0x%x,   rwptr.bits.wptr(HW) = 0x%x ]---->Free_Q(SW_HW) = 0x%8x \n",__func__,rx_pkts_num,rwptr.bits.rptr,rwptr.bits.rptr,rwptr.bits.wptr,fq_rwptr.bits32 );
++//	if (rwptr.bits.rptr > rwptr.bits.wptr )
++//			{
++				//toe_gmac_disable_rx(dev);
++				//wait_event_interruptible_timeout(freeq_wait,
++					//(rx_pkts_num == 100), CMTP_INTEROP_TIMEOUT);
++				//printk("\n%s:: return 22222=======> rx_pkts_num =%d,   rwptr.bits.rptr=%d,   rwptr.bits.wptr = %d ====---------=======>JKJKJKJKJK\n",
++					//__func__,rx_pkts_num,rwptr.bits.rptr,rwptr.bits.wptr);
++//				return 1;
++//			}
++
++	if (rwptr.bits.rptr == rwptr.bits.wptr)
++	{
++		unsigned int data32;
++			//printk("%s:---[rwptr.bits.rptr == rwptr.bits.wptr]   rx_pkts_num=%d------rwptr.bits.rptr=0x%x------->Default_Q [rwptr.bits.rptr(SW)=0x%x,   rwptr.bits.wptr(HW) = 0x%x ]---->Free_Q(SW_HW) = 0x%8x \n",__func__,rx_pkts_num,rwptr.bits.rptr,rwptr.bits.rptr,rwptr.bits.wptr,fq_rwptr.bits32 );
++
++	    /* Receive descriptor is empty now */
++#if 1
++     if (status4 & 0x1)
++   			{
++   				do_again =1;
++   				//writel(0x40400000, TOE_GLOBAL_BASE+GLOBAL_INTERRUPT_ENABLE_4_REG); //disable SWFQ empty interrupt
++   				//toe_gmac_disable_interrupt(tp->irq);
++   				tp->sw_fq_empty_cnt++;
++   				//toe_gmac_disable_rx(dev);
++   				writel(0x07960202, TOE_GMAC0_BASE+GMAC_CONFIG0);
++				writel(0x07960202, TOE_GMAC1_BASE+GMAC_CONFIG0);
++   				//printk("\n%s ::  freeq int-----tp->sw_fq_empty_cnt  =%d---------====================----------------->\n",__func__,tp->sw_fq_empty_cnt);
++   				//while ((fq_rwptr.bits.wptr >= (fq_rwptr.bits.rptr+256)) || (fq_rwptr.bits.wptr <= (fq_rwptr.bits.rptr+256)))
++   				//{
++   					//gmac_write_reg(TOE_GLOBAL_BASE, GLOBAL_INTERRUPT_STATUS_4_REG, status4,
++					//0x1);
++				//printk("\n%s::fq_rwptr.wrptr = %x =======> ===========>here \n", __func__,fq_rwptr.bits32);
++				//if ((status4 & 0x1) == 0)
++					//break;
++				 return 1;
++				//}
++
++			}
++#endif
++        //toe_gmac_fill_free_q();
++        netif_rx_complete(dev);
++        // enable GMAC-0 rx interrupt
++        // class-Q & TOE-Q are implemented in future
++        //data32 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_1_REG);
++        //if (tp->port_id == 0)
++        	//data32 |= DEFAULT_Q0_INT_BIT;
++        //else
++        	//data32 |= DEFAULT_Q1_INT_BIT;
++        //writel(data32, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_1_REG);
++		writel(0x3, TOE_GLOBAL_BASE+GLOBAL_INTERRUPT_ENABLE_1_REG);
++		//printk("\n%s::netif_rx_complete-->  rx_pkts_num =%d,   rwptr.bits.rptr=0x%x,   rwptr.bits.wptr = 0x%x ====---------=======>JKJKJKJKJK\n",
++		//__func__,rx_pkts_num,rwptr.bits.rptr,rwptr.bits.wptr);
++        writel(0x07960200, TOE_GMAC0_BASE+GMAC_CONFIG0);
++		writel(0x07960200, TOE_GMAC1_BASE+GMAC_CONFIG0);
++        return 0;
++    }
++    else
++    {
++        //printk("\n%s:: return 1 -->status4= 0x%x,rx_pkts_num =%d,   rwptr.bits.rptr=0x%x,   rwptr.bits.wptr = 0x%x  ======> \n", __func__,status4,rx_pkts_num,rwptr.bits.rptr,rwptr.bits.wptr);
++        return 1;
++    }
++}
++#endif
++
++/*----------------------------------------------------------------------
++* gmac_tx_timeout
++*----------------------------------------------------------------------*/
++void gmac_tx_timeout(struct net_device *dev)
++{
++	GMAC_INFO_T				*tp = (GMAC_INFO_T *)dev->priv;
++
++#ifdef CONFIG_SL351x_SYSCTL
++	if (tp->operation && storlink_ctl.link[tp->port_id])
++#else
++	if (tp->operation)
++#endif
++	{
++		netif_wake_queue(dev);
++	}
++}
++
++
++
++/*----------------------------------------------------------------------
++* mac_set_rule_reg
++*----------------------------------------------------------------------*/
++int mac_set_rule_reg(int mac, int rule, int enabled, u32 reg0, u32 reg1, u32 reg2)
++{
++	int		total_key_dwords;
++
++	total_key_dwords = 1;
++
++	if (reg0 & MR_L2_BIT)
++	{
++		if (reg0 & MR_DA_BIT) total_key_dwords += 2;
++		if (reg0 & MR_SA_BIT) total_key_dwords += 2;
++		if ((reg0 & MR_DA_BIT) && ( reg0 & MR_SA_BIT)) total_key_dwords--;
++		if (reg0 & (MR_PPPOE_BIT | MR_VLAN_BIT)) total_key_dwords++;
++	}
++	if (reg0 & MR_L3_BIT)
++	{
++		if (reg0 & (MR_IP_HDR_LEN_BIT | MR_TOS_TRAFFIC_BIT | MR_SPR_BITS))
++			total_key_dwords++;
++		if (reg0 & MR_FLOW_LABLE_BIT) total_key_dwords++;
++		if ((reg0 & MR_IP_VER_BIT) == 0) // IPv4
++		{
++			if (reg1 & 0xff000000) total_key_dwords += 1;
++			if (reg1 & 0x00ff0000) total_key_dwords += 1;
++		}
++		else
++		{
++			if (reg1 & 0xff000000) total_key_dwords += 4;
++			if (reg1 & 0x00ff0000) total_key_dwords += 4;
++		}
++	}
++	if (reg0 & MR_L4_BIT)
++	{
++		if (reg1 & 0x0000f000) total_key_dwords += 1;
++		if (reg1 & 0x00000f00) total_key_dwords += 1;
++		if (reg1 & 0x000000f0) total_key_dwords += 1;
++		if (reg1 & 0x0000000f) total_key_dwords += 1;
++		if (reg2 & 0xf0000000) total_key_dwords += 1;
++		if (reg2 & 0x0f000000) total_key_dwords += 1;
++	}
++	if (reg0 & MR_L7_BIT)
++	{
++		if (reg2 & 0x00f00000) total_key_dwords += 1;
++		if (reg2 & 0x000f0000) total_key_dwords += 1;
++		if (reg2 & 0x0000f000) total_key_dwords += 1;
++		if (reg2 & 0x00000f00) total_key_dwords += 1;
++		if (reg2 & 0x000000f0) total_key_dwords += 1;
++		if (reg2 & 0x0000000f) total_key_dwords += 1;
++	}
++
++	if (total_key_dwords > HASH_MAX_KEY_DWORD)
++		return -1;
++
++	if (total_key_dwords == 0 && enabled)
++		return -2;
++
++	mac_set_rule_enable_bit(mac, rule, 0);
++	if (enabled)
++	{
++		mac_set_MRxCRx(mac, rule, 0, reg0);
++		mac_set_MRxCRx(mac, rule, 1, reg1);
++		mac_set_MRxCRx(mac, rule, 2, reg2);
++		mac_set_rule_action(mac, rule, total_key_dwords);
++		mac_set_rule_enable_bit(mac, rule, enabled);
++	}
++	else
++	{
++		mac_set_rule_action(mac, rule, 0);
++	}
++	return total_key_dwords;
++}
++
++/*----------------------------------------------------------------------
++* mac_get_rule_enable_bit
++*----------------------------------------------------------------------*/
++int mac_get_rule_enable_bit(int mac, int rule)
++{
++	switch (rule)
++	{
++		case 0: return ((mac_read_dma_reg(mac, GMAC_HASH_ENGINE_REG0) >> 15) & 1);
++		case 1: return ((mac_read_dma_reg(mac, GMAC_HASH_ENGINE_REG0) >> 31) & 1);
++		case 2: return ((mac_read_dma_reg(mac, GMAC_HASH_ENGINE_REG1) >> 15) & 1);
++		case 3: return ((mac_read_dma_reg(mac, GMAC_HASH_ENGINE_REG1) >> 31) & 1);
++		default: return 0;
++	}
++}
++
++/*----------------------------------------------------------------------
++* mac_set_rule_enable_bit
++*----------------------------------------------------------------------*/
++void mac_set_rule_enable_bit(int mac, int rule, int data)
++{
++	u32 reg;
++
++	if (data & ~1)
++		return;
++
++	switch (rule)
++	{
++		case 0:
++			reg = (mac_read_dma_reg(mac, GMAC_HASH_ENGINE_REG0) & ~(1<<15)) | (data << 15);
++			mac_write_dma_reg(mac, GMAC_HASH_ENGINE_REG0, reg);
++			break;
++		case 1:
++			reg = (mac_read_dma_reg(mac, GMAC_HASH_ENGINE_REG0) & ~(1<<31)) | (data << 31);
++			mac_write_dma_reg(mac, GMAC_HASH_ENGINE_REG0, reg);
++			break;
++		case 2:
++			reg = (mac_read_dma_reg(mac, GMAC_HASH_ENGINE_REG1) & ~(1<<15)) | (data << 15);
++			mac_write_dma_reg(mac, GMAC_HASH_ENGINE_REG1, reg);
++			break;
++		case 3:
++			reg = (mac_read_dma_reg(mac, GMAC_HASH_ENGINE_REG1) & ~(1<<31)) | (data << 31);
++			mac_write_dma_reg(mac, GMAC_HASH_ENGINE_REG1, reg);
++	}
++}
++
++/*----------------------------------------------------------------------
++* mac_set_rule_action
++*----------------------------------------------------------------------*/
++int mac_set_rule_action(int mac, int rule, int data)
++{
++	u32 reg;
++
++	if (data > 32)
++		return -1;
++
++	if (data)
++		data = (data << 6) | (data + HASH_ACTION_DWORDS);
++	switch (rule)
++	{
++		case 0:
++			reg = (mac_read_dma_reg(mac, GMAC_HASH_ENGINE_REG0) & ~(0x7ff));
++			mac_write_dma_reg(mac, GMAC_HASH_ENGINE_REG0, reg | data);
++			break;
++		case 1:
++			reg = (mac_read_dma_reg(mac, GMAC_HASH_ENGINE_REG0) & ~(0x7ff<<16));
++			mac_write_dma_reg(mac, GMAC_HASH_ENGINE_REG0, reg | (data << 16));
++			break;
++		case 2:
++			reg = (mac_read_dma_reg(mac, GMAC_HASH_ENGINE_REG1) & ~(0x7ff));
++			mac_write_dma_reg(mac, GMAC_HASH_ENGINE_REG1,  reg | data);
++			break;
++		case 3:
++			reg = (mac_read_dma_reg(mac, GMAC_HASH_ENGINE_REG1) & ~(0x7ff<<16));
++			mac_write_dma_reg(mac, GMAC_HASH_ENGINE_REG1, reg | (data << 16));
++			break;
++		default:
++			return -1;
++	}
++
++	return 0;
++}
++/*----------------------------------------------------------------------
++* mac_get_MRxCRx
++*----------------------------------------------------------------------*/
++int mac_get_MRxCRx(int mac, int rule, int ctrlreg)
++{
++	int reg;
++
++	switch (rule)
++	{
++		case 0: reg = GMAC_MR0CR0 + ctrlreg * 4; break;
++		case 1: reg = GMAC_MR1CR0 + ctrlreg * 4; break;
++		case 2: reg = GMAC_MR2CR0 + ctrlreg * 4; break;
++		case 3: reg = GMAC_MR3CR0 + ctrlreg * 4; break;
++		default: return 0;
++	}
++	return mac_read_dma_reg(mac, reg);
++}
++
++/*----------------------------------------------------------------------
++* mac_set_MRxCRx
++*----------------------------------------------------------------------*/
++void mac_set_MRxCRx(int mac, int rule, int ctrlreg, u32 data)
++{
++	int reg;
++
++	switch (rule)
++	{
++		case 0: reg = GMAC_MR0CR0 + ctrlreg * 4; break;
++		case 1: reg = GMAC_MR1CR0 + ctrlreg * 4; break;
++		case 2: reg = GMAC_MR2CR0 + ctrlreg * 4; break;
++		case 3: reg = GMAC_MR3CR0 + ctrlreg * 4; break;
++		default: return;
++	}
++	mac_write_dma_reg(mac, reg, data);
++}
++
++/*----------------------------------------------------------------------
++* mac_set_rule_priority
++*----------------------------------------------------------------------*/
++void mac_set_rule_priority(int mac, int p0, int p1, int p2, int p3)
++{
++	int 			i;
++	GMAC_MRxCR0_T	reg[4];
++
++	for (i=0; i<4; i++)
++		reg[i].bits32 = mac_get_MRxCRx(mac, i, 0);
++
++	reg[0].bits.priority = p0;
++	reg[1].bits.priority = p1;
++	reg[2].bits.priority = p2;
++	reg[3].bits.priority = p3;
++
++	for (i=0; i<4; i++)
++		mac_set_MRxCRx(mac, i, 0, reg[i].bits32);
++}
++
++/*----------------------------------------------------------------------
++* gmac_netdev_ioctl
++*----------------------------------------------------------------------*/
++static int gmac_netdev_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
++{
++	int 				rc = 0;
++    unsigned char		*hwa = rq->ifr_ifru.ifru_hwaddr.sa_data;
++
++#ifdef br_if_ioctl
++    struct 				ethtool_cmd ecmd; 	//br_if.c will call this ioctl
++	GMAC_INFO_T 		*tp = dev->priv;
++#endif
++
++#ifdef 	CONFIG_SL351x_NAT
++	if (cmd == SIOCDEVPRIVATE)
++		return sl351x_nat_ioctl(dev, rq, cmd);
++#endif
++
++	switch (cmd) {
++	case SIOCETHTOOL:
++#ifdef br_if_ioctl  	//br_if.c will call this ioctl
++		if (!netif_running(dev))
++		{
++			printk("Before changing the H/W address,please down the device.\n");
++			return -EINVAL;
++		}
++		memset((void *) &ecmd, 0, sizeof (ecmd));
++           	    ecmd.supported =
++                	SUPPORTED_Autoneg | SUPPORTED_TP | SUPPORTED_MII |
++                    SUPPORTED_10baseT_Half | SUPPORTED_10baseT_Full |
++                    SUPPORTED_100baseT_Half | SUPPORTED_100baseT_Full;
++         		    ecmd.port = PORT_TP;
++            	    ecmd.transceiver = XCVR_EXTERNAL;
++            	    ecmd.phy_address = tp->phy_addr;
++            	    switch (tp->speed_status)
++            	    {
++            	    case GMAC_SPEED_10: ecmd.speed = SPEED_10; break;
++             	    case GMAC_SPEED_100: ecmd.speed = SPEED_100; break;
++            	    case GMAC_SPEED_1000: ecmd.speed = SPEED_1000; break;
++            	    default: ecmd.speed = SPEED_10; break;
++            	   }
++            	    ecmd.duplex = tp->full_duplex_status ? DUPLEX_FULL : DUPLEX_HALF;
++            	    ecmd.advertising = ADVERTISED_TP;
++            	    ecmd.advertising |= ADVERTISED_Autoneg;
++           	    ecmd.autoneg = AUTONEG_ENABLE;
++                    if (copy_to_user(rq->ifr_data, &ecmd, sizeof (ecmd)))
++                  	return -EFAULT;
++#endif
++
++        break;
++
++    case SIOCSIFHWADDR:
++		if (!netif_running(dev))
++		{
++			printk("Before changing the H/W address,please down the device.\n");
++			return -EINVAL;
++		}
++        gmac_set_mac_address(dev,hwa);
++        break;
++
++	case SIOCGMIIPHY:	/* Get the address of the PHY in use. */
++        break;
++
++	case SIOCGMIIREG:	/* Read the specified MII register. */
++		break;
++
++	case SIOCSMIIREG:	/* Write the specified MII register */
++		break;
++
++	default:
++		rc = -EOPNOTSUPP;
++		break;
++	}
++
++	return rc;
++}
++
++#ifdef SL351x_GMAC_WORKAROUND
++
++#define GMAC_TX_STATE_OFFSET	0x60
++#define GMAC_RX_STATE_OFFSET	0x64
++#define GMAC_POLL_HANGED_NUM	200
++#define GMAC_RX_HANGED_STATE	0x4b2000
++#define GMAC_RX_HANGED_MASK		0xdff000
++#define GMAC_TX_HANGED_STATE	0x34012
++#define GMAC_TX_HANGED_MASK		0xfffff
++#define TOE_GLOBAL_REG_SIZE		(0x78/sizeof(u32))
++#define TOE_DMA_REG_SIZE		(0xd0/sizeof(u32))
++#define TOE_GMAC_REG_SIZE		(0x30/sizeof(u32))
++#define GMAC0_RX_HANG_BIT		(1 << 0)
++#define GMAC0_TX_HANG_BIT		(1 << 1)
++#define GMAC1_RX_HANG_BIT		(1 << 2)
++#define GMAC1_TX_HANG_BIT		(1 << 3)
++
++int		gmac_in_do_workaround;
++#if 0
++int		debug_cnt, poll_max_cnt;
++#endif
++u32		gmac_workaround_cnt[4];
++u32		toe_global_reg[TOE_GLOBAL_REG_SIZE];
++u32		toe_dma_reg[GMAC_NUM][TOE_DMA_REG_SIZE];
++u32		toe_gmac_reg[GMAC_NUM][TOE_GMAC_REG_SIZE];
++u32		gmac_short_frame_workaround_cnt[2];
++
++static void sl351x_gmac_release_buffers(void);
++static void sl351x_gmac_release_swtx_q(void);
++static void sl351x_gmac_release_rx_q(void);
++#ifdef _TOEQ_CLASSQ_READY_
++static void sl351x_gmac_release_class_q(void);
++static void sl351x_gmac_release_toe_q(void);
++static void sl351x_gmac_release_intr_q(void);
++#endif
++static void sl351x_gmac_release_sw_free_q(void);
++static void sl351x_gmac_release_hw_free_q(void);
++#ifdef CONFIG_SL351x_NAT
++static int get_free_desc_cnt(unsigned long rwptr, int total);
++static void sl351x_gmac_release_hwtx_q(void);
++u32     sl351x_nat_workaround_cnt;
++#endif
++void sl351x_gmac_save_reg(void);
++void sl351x_gmac_restore_reg(void);
++
++
++/*----------------------------------------------------------------------
++* 	sl351x_poll_gmac_hanged_status
++* 	- Called by timer routine, period 10ms
++*	- If (state != 0 && state == prev state && )
++*----------------------------------------------------------------------*/
++void sl351x_poll_gmac_hanged_status(u32 data)
++{
++	int 			i;
++	u32 			state;
++	TOE_INFO_T		*toe;
++	GMAC_INFO_T		*tp;
++	u32				hanged_state;
++	// int				old_operation[GMAC_NUM];
++#ifdef CONFIG_SL351x_NAT
++	u32				hw_free_cnt;
++#endif
++
++	if (gmac_in_do_workaround)
++		return;
++
++	gmac_in_do_workaround = 1;
++
++	toe = (TOE_INFO_T *)&toe_private_data;
++	hanged_state = 0;
++
++#ifdef SL351x_TEST_WORKAROUND
++	if (toe->gmac[0].operation || toe->gmac[1].operation)
++	{
++		debug_cnt++;
++		if (debug_cnt == (30 * HZ))
++		{
++			debug_cnt = 0;
++			hanged_state = GMAC0_RX_HANG_BIT;
++			goto do_workaround;
++		}
++	}
++#endif
++	if (toe->gmac[0].operation)
++		hanged_state |= GMAC0_RX_HANG_BIT | GMAC0_TX_HANG_BIT;
++
++#if (GMAC_NUM > 1)
++	if (toe->gmac[1].operation)
++		hanged_state |= GMAC1_RX_HANG_BIT | GMAC1_TX_HANG_BIT;
++#endif
++
++	for (i=0; i 1)
++		if (hanged_state & GMAC1_RX_HANG_BIT)
++		{
++			state = readl(TOE_GMAC1_BASE + GMAC_RX_STATE_OFFSET) & GMAC_RX_HANGED_MASK;
++			if (state != GMAC_RX_HANGED_STATE)
++				hanged_state &= ~GMAC1_RX_HANG_BIT;
++		}
++		if (hanged_state & GMAC1_TX_HANG_BIT)
++		{
++			state = readl(TOE_GMAC1_BASE + GMAC_TX_STATE_OFFSET) & GMAC_TX_HANGED_MASK;
++			if (state != GMAC_TX_HANGED_STATE)
++				hanged_state &= ~GMAC1_TX_HANG_BIT;
++		}
++#endif
++		if (!hanged_state)
++		{
++#if 0
++			if (i < poll_max_cnt)
++				poll_max_cnt = i;
++#endif
++			if (toe->gmac[0].short_frames_cnt >= GMAC_SHORT_FRAME_THRESHOLD)
++			{
++				gmac_short_frame_workaround_cnt[0]++;
++				toe->gmac[0].short_frames_cnt = 0;
++				goto do_workaround;
++			}
++#if (GMAC_NUM > 1)
++			if (toe->gmac[1].short_frames_cnt >= GMAC_SHORT_FRAME_THRESHOLD)
++			{
++				gmac_short_frame_workaround_cnt[1]++;
++				toe->gmac[1].short_frames_cnt = 0;
++				goto do_workaround;
++			}
++#endif
++
++#ifdef CONFIG_SL351x_NAT
++			hw_free_cnt = readl(TOE_GLOBAL_BASE + GLOBAL_HWFQ_RWPTR_REG);
++			hw_free_cnt = get_free_desc_cnt(hw_free_cnt, TOE_HW_FREEQ_DESC_NUM);
++#ifdef NAT_WORKAROUND_BY_RESET_GMAC
++			if (readl(TOE_GLOBAL_BASE + 0x4084) && (hw_free_cnt <= PAUSE_SET_HW_FREEQ))
++			{
++				sl351x_nat_workaround_cnt++;
++				goto do_workaround;
++			}
++#else
++			if (readl(TOE_GLOBAL_BASE + 0x4084) && (hw_free_cnt <= (PAUSE_SET_HW_FREEQ*2)))
++			{
++				sl351x_nat_workaround_cnt++;
++				sl351x_nat_workaround_handler();
++			}
++#endif
++#endif
++			gmac_in_do_workaround = 0;
++			add_timer(&gmac_workround_timer_obj);
++			return;
++		}
++	}
++
++do_workaround:
++
++	gmac_initialized = 0;
++	if (hanged_state)
++	{
++		if (hanged_state & GMAC0_RX_HANG_BIT) gmac_workaround_cnt[0]++;
++		if (hanged_state & GMAC0_TX_HANG_BIT) gmac_workaround_cnt[1]++;
++		if (hanged_state & GMAC1_RX_HANG_BIT) gmac_workaround_cnt[2]++;
++		if (hanged_state & GMAC1_TX_HANG_BIT) gmac_workaround_cnt[3]++;
++	}
++
++	for (i=0; igmac[i];
++		// old_operation[i] = tp->operation;
++		if (tp->operation)
++		{
++			netif_stop_queue(tp->dev);
++			clear_bit(__LINK_STATE_START, &tp->dev->state);
++			toe_gmac_disable_interrupt(tp->irq);
++			toe_gmac_disable_tx_rx(tp->dev);
++			toe_gmac_hw_stop(tp->dev);
++		}
++	}
++
++	// clear all status bits
++	writel(0xffffffff, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_STATUS_0_REG);
++	writel(0xffffffff, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_STATUS_1_REG);
++	writel(0xffffffff, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_STATUS_2_REG);
++	writel(0xffffffff, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_STATUS_3_REG);
++	writel(0xffffffff, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_STATUS_4_REG);
++
++#if 0
++	if ((hanged_state & GMAC0_RX_HANG_BIT) &&
++		(readl(TOE_GMAC0_DMA_BASE + 0xdc) & 0xf0))
++	{
++		struct sk_buff *skb;
++		unsigned int buf;
++		buf = readl(TOE_GMAC0_DMA_BASE + 0x68) & ~3;
++#ifdef CONFIG_SL351x_NAT
++		if (buf < toe->hwfq_buf_base_dma || buf > toe->hwfq_buf_end_dma)
++#endif
++		{
++			skb = (struct sk_buff *)(REG32(buf - SKB_RESERVE_BYTES));
++			printk("GMAC-0 free a loss SKB 0x%x\n", (u32)skb);
++			dev_kfree_skb(skb);
++		}
++	}
++	if ((hanged_state & GMAC1_RX_HANG_BIT)  &&
++		(readl(TOE_GMAC1_DMA_BASE + 0xdc) & 0xf0))
++	{
++		struct sk_buff *skb;
++		unsigned int buf;
++		buf = readl(TOE_GMAC1_DMA_BASE + 0x68) & ~3;
++#ifdef CONFIG_SL351x_NAT
++		if (buf < toe->hwfq_buf_base_dma || buf > toe->hwfq_buf_end_dma)
++#endif
++		{
++			skb = (struct sk_buff *)(REG32(buf - SKB_RESERVE_BYTES));
++			printk("GMAC-1 free a loss SKB 0x%x\n", (u32)skb);
++			dev_kfree_skb(skb);
++		}
++	}
++#endif
++
++	sl351x_gmac_release_buffers();
++	sl351x_gmac_save_reg();
++	toe_gmac_sw_reset();
++	sl351x_gmac_restore_reg();
++
++	if (toe->gmac[0].default_qhdr->word1.bits32)
++	{
++		// printk("===> toe->gmac[0].default_qhdr->word1 = 0x%x\n", toe->gmac[0].default_qhdr->word1);
++		sl351x_gmac_release_rx_q();
++		writel(0, &toe->gmac[0].default_qhdr->word1);
++	}
++	if (toe->gmac[1].default_qhdr->word1.bits32)
++	{
++		// printk("===> toe->gmac[1].default_qhdr->word1 = 0x%x\n", toe->gmac[1].default_qhdr->word1);
++		sl351x_gmac_release_rx_q();
++		writel(0, &toe->gmac[1].default_qhdr->word1);
++	}
++
++	gmac_initialized = 1;
++
++#ifdef 	CONFIG_SL351x_NAT
++	writel(0, TOE_GLOBAL_BASE + 0x4084);
++#endif
++
++	for (i=0; igmac[i];
++ 		if (tp->operation)
++ 		{
++			toe_gmac_enable_interrupt(tp->irq);
++			toe_gmac_hw_start(tp->dev);
++			toe_gmac_enable_tx_rx(tp->dev);
++			netif_wake_queue(tp->dev);
++			set_bit(__LINK_STATE_START, &tp->dev->state);
++		}
++	}
++
++	gmac_in_do_workaround = 0;
++	add_timer(&gmac_workround_timer_obj);
++}
++
++/*----------------------------------------------------------------------
++*	get_free_desc_cnt
++*----------------------------------------------------------------------*/
++#ifdef CONFIG_SL351x_NAT
++static int get_free_desc_cnt(unsigned long rwptr, int total)
++{
++	unsigned short wptr = rwptr & 0xffff;
++	unsigned short rptr = rwptr >> 16;
++
++	if (wptr >= rptr)
++		return (total - wptr + rptr);
++	else
++		return (rptr - wptr);
++}
++#endif
++/*----------------------------------------------------------------------
++* 	sl351x_gmac_release_buffers
++*----------------------------------------------------------------------*/
++static void sl351x_gmac_release_buffers(void)
++{
++	// Free buffers & Descriptors in all SW Tx Queues
++	sl351x_gmac_release_swtx_q();
++
++	// Free buffers in Default Rx Queues
++	sl351x_gmac_release_rx_q();
++
++#ifdef _TOEQ_CLASSQ_READY_
++	// Free buffers in Classification Queues
++	sl351x_gmac_release_class_q();
++
++	// Free buffers in TOE Queues
++	sl351x_gmac_release_toe_q();
++
++	// Free buffers in Interrupt Queues
++	sl351x_gmac_release_intr_q();
++#endif
++
++	// Free buffers & descriptors in SW free queue
++	sl351x_gmac_release_sw_free_q();
++
++	// Free buffers & descriptors in HW free queue
++	sl351x_gmac_release_hw_free_q();
++
++#ifdef CONFIG_SL351x_NAT
++	// Free buffers & descriptors in HW free queue
++	sl351x_gmac_release_hwtx_q();
++#endif
++}
++/*----------------------------------------------------------------------
++* 	sl351x_gmac_release_swtx_q
++*----------------------------------------------------------------------*/
++static void sl351x_gmac_release_swtx_q(void)
++{
++	int				i, j;
++	GMAC_TXDESC_T	*curr_desc;
++	unsigned int	desc_count;
++	TOE_INFO_T		*toe;
++	GMAC_INFO_T		*tp;
++	GMAC_SWTXQ_T	*swtxq;
++	DMA_RWPTR_T		rwptr;
++
++	toe = (TOE_INFO_T *)&toe_private_data;
++	tp = (GMAC_INFO_T *)&toe->gmac[0];
++	for (i=0; iexisted) continue;
++		swtxq = (GMAC_SWTXQ_T *)&tp->swtxq[0];
++		for (j=0; jrwptr_reg);
++				if (rwptr.bits.rptr == swtxq->finished_idx)
++				break;
++				curr_desc = (GMAC_TXDESC_T *)swtxq->desc_base + swtxq->finished_idx;
++				// if (curr_desc->word0.bits.status_tx_ok)
++				{
++					desc_count = curr_desc->word0.bits.desc_count;
++					while (--desc_count)
++					{
++						curr_desc->word0.bits.status_tx_ok = 0;
++						swtxq->finished_idx = RWPTR_ADVANCE_ONE(swtxq->finished_idx, swtxq->total_desc_num);
++						curr_desc = (GMAC_TXDESC_T *)swtxq->desc_base + swtxq->finished_idx;
++					}
++
++					curr_desc->word0.bits.status_tx_ok = 0;
++					if (swtxq->tx_skb[swtxq->finished_idx])
++					{
++						dev_kfree_skb_irq(swtxq->tx_skb[swtxq->finished_idx]);
++						swtxq->tx_skb[swtxq->finished_idx] = NULL;
++					}
++				}
++				swtxq->finished_idx = RWPTR_ADVANCE_ONE(swtxq->finished_idx, swtxq->total_desc_num);
++			}
++			writel(0, swtxq->rwptr_reg);
++			swtxq->finished_idx = 0;
++		}
++	}
++
++}
++/*----------------------------------------------------------------------
++* 	sl351x_gmac_release_rx_q
++*----------------------------------------------------------------------*/
++static void sl351x_gmac_release_rx_q(void)
++{
++	int				i;
++	TOE_INFO_T		*toe;
++	GMAC_INFO_T		*tp;
++	DMA_RWPTR_T		rwptr;
++	volatile GMAC_RXDESC_T	*curr_desc;
++	struct sk_buff			*skb;
++
++	toe = (TOE_INFO_T *)&toe_private_data;
++	tp = (GMAC_INFO_T *)&toe->gmac[0];
++	for (i=0; iexisted) continue;
++		rwptr.bits32 = readl(&tp->default_qhdr->word1);
++		while (rwptr.bits.rptr != rwptr.bits.wptr)
++		{
++			curr_desc = (GMAC_RXDESC_T *)tp->default_desc_base + rwptr.bits.rptr;
++			skb = (struct sk_buff *)(REG32(__va(curr_desc->word2.buf_adr) - SKB_RESERVE_BYTES));
++			dev_kfree_skb_irq(skb);
++			rwptr.bits.rptr = RWPTR_ADVANCE_ONE(rwptr.bits.rptr, tp->default_desc_num);
++			SET_RPTR(&tp->default_qhdr->word1, rwptr.bits.rptr);
++			rwptr.bits32 = readl(&tp->default_qhdr->word1);
++		}  // while
++		writel(0, &tp->default_qhdr->word1);
++		tp->rx_rwptr.bits32 = 0;
++	} // for
++
++}
++/*----------------------------------------------------------------------
++* 	sl351x_gmac_release_class_q
++*----------------------------------------------------------------------*/
++#ifdef _TOEQ_CLASSQ_READY_
++static void sl351x_gmac_release_class_q(void)
++{
++	int				i;
++	TOE_INFO_T		*toe;
++	CLASSQ_INFO_T	*classq;
++	DMA_RWPTR_T		rwptr;
++	volatile GMAC_RXDESC_T	*curr_desc;
++	struct sk_buff			*skb;
++
++	toe = (TOE_INFO_T *)&toe_private_data;
++	classq = (CLASSQ_INFO_T *)&toe->classq[0];
++	for (i=0; iqhdr->word1);
++		while (rwptr.bits.rptr != rwptr.bits.wptr)
++		{
++			curr_desc = (GMAC_RXDESC_T *)classq->desc_base + rwptr.bits.rptr;
++			skb = (struct sk_buff *)(REG32(__va(curr_desc->word2.buf_adr) - SKB_RESERVE_BYTES));
++			dev_kfree_skb_irq(skb);
++			rwptr.bits.rptr = RWPTR_ADVANCE_ONE(rwptr.bits.rptr, classq->desc_num);
++			SET_RPTR(&classq->qhdr->word1, rwptr.bits.rptr);
++			rwptr.bits32 = readl(&classq->qhdr->word1);
++		}  // while
++		writel(0, &classq->qhdr->word1);
++		classq->rwptr.bits32 = 0;
++	} // for
++
++}
++#endif
++/*----------------------------------------------------------------------
++* 	sl351x_gmac_release_toe_q
++*----------------------------------------------------------------------*/
++#ifdef _TOEQ_CLASSQ_READY_
++static void sl351x_gmac_release_toe_q(void)
++{
++	int				i;
++	TOE_INFO_T		*toe;
++	TOEQ_INFO_T		*toeq_info;
++	TOE_QHDR_T		*toe_qhdr;
++	DMA_RWPTR_T		rwptr;
++	volatile GMAC_RXDESC_T	*curr_desc;
++	unsigned int	rptr, wptr;
++	GMAC_RXDESC_T	*toe_curr_desc;
++	struct sk_buff			*skb;
++
++	toe = (TOE_INFO_T *)&toe_private_data;
++	toe_qhdr = (TOE_QHDR_T *)TOE_TOE_QUE_HDR_BASE;
++	for (i=0; itoeq[i];
++		wptr = toe_qhdr->word1.bits.wptr;
++		rptr = toe_qhdr->word1.bits.rptr;
++		while (rptr != wptr)
++		{
++			toe_curr_desc = (GMAC_RXDESC_T *)toeq_info->desc_base + rptr;
++			skb = (struct sk_buff *)(REG32(__va(toe_curr_desc->word2.buf_adr) - SKB_RESERVE_BYTES));
++			dev_kfree_skb_irq(skb);
++			rptr = RWPTR_ADVANCE_ONE(rptr, toeq_info->desc_num);
++			SET_RPTR(&toe_qhdr->word1.bits32, rptr);
++			wptr = toe_qhdr->word1.bits.wptr;
++			rptr = toe_qhdr->word1.bits.rptr;
++		}
++		toe_qhdr->word1.bits32 = 0;
++		toeq_info->rwptr.bits32 = 0;
++	}
++}
++#endif
++/*----------------------------------------------------------------------
++* 	sl351x_gmac_release_intr_q
++*----------------------------------------------------------------------*/
++#ifdef _TOEQ_CLASSQ_READY_
++static void sl351x_gmac_release_intr_q(void)
++{
++}
++#endif
++/*----------------------------------------------------------------------
++* 	sl351x_gmac_release_sw_free_q
++*----------------------------------------------------------------------*/
++static void sl351x_gmac_release_sw_free_q(void)
++{
++	TOE_INFO_T				*toe;
++	volatile DMA_RWPTR_T	fq_rwptr;
++	volatile GMAC_RXDESC_T	*fq_desc;
++
++	toe = (TOE_INFO_T *)&toe_private_data;
++	fq_rwptr.bits32 = readl(TOE_GLOBAL_BASE + GLOBAL_SWFQ_RWPTR_REG);
++
++	while ((unsigned short)RWPTR_ADVANCE_ONE(fq_rwptr.bits.wptr, TOE_SW_FREEQ_DESC_NUM) != fq_rwptr.bits.rptr)
++	{
++		struct sk_buff *skb;
++		if ((skb = dev_alloc_skb(SW_RX_BUF_SIZE))==NULL)  /* allocate socket buffer */
++		{
++			printk("%s::skb buffer allocation fail !\n",__func__); while(1);
++		}
++		// *(unsigned int *)(skb->data) = (unsigned int)skb;
++		REG32(skb->data) = (unsigned long)skb;
++		skb_reserve(skb, SKB_RESERVE_BYTES);
++
++		fq_rwptr.bits.wptr = RWPTR_ADVANCE_ONE(fq_rwptr.bits.wptr, TOE_SW_FREEQ_DESC_NUM);
++		fq_desc = (volatile GMAC_RXDESC_T *)toe->swfq_desc_base + fq_rwptr.bits.wptr;
++		fq_desc->word2.buf_adr = (unsigned int)__pa(skb->data);
++		SET_WPTR(TOE_GLOBAL_BASE + GLOBAL_SWFQ_RWPTR_REG, fq_rwptr.bits.wptr);
++		fq_rwptr.bits32 = readl(TOE_GLOBAL_BASE + GLOBAL_SWFQ_RWPTR_REG);
++	}
++
++	toe->fq_rx_rwptr.bits.wptr = TOE_SW_FREEQ_DESC_NUM - 1;
++	toe->fq_rx_rwptr.bits.rptr = 0;
++	writel(toe->fq_rx_rwptr.bits32, TOE_GLOBAL_BASE + GLOBAL_SWFQ_RWPTR_REG);
++
++}
++/*----------------------------------------------------------------------
++* 	sl351x_gmac_release_hw_free_q
++*----------------------------------------------------------------------*/
++static void sl351x_gmac_release_hw_free_q(void)
++{
++	DMA_RWPTR_T			rwptr_reg;
++
++#ifdef CONFIG_SL351x_NAT
++	int					i;
++	TOE_INFO_T			*toe;
++	GMAC_RXDESC_T		*desc_ptr;
++	unsigned int		buf_ptr;
++
++	toe = (TOE_INFO_T *)&toe_private_data;
++	desc_ptr = (GMAC_RXDESC_T *)toe->hwfq_desc_base;
++	buf_ptr = (unsigned int)toe->hwfq_buf_base_dma;
++	for (i=0; iword0.bits.buffer_size = HW_RX_BUF_SIZE;
++		desc_ptr->word1.bits.sw_id = i;
++		desc_ptr->word2.buf_adr = (unsigned int)buf_ptr;
++   		desc_ptr++;
++   		buf_ptr += HW_RX_BUF_SIZE;
++	}
++#endif
++	rwptr_reg.bits.wptr = TOE_HW_FREEQ_DESC_NUM - 1;
++	rwptr_reg.bits.rptr = 0;
++	writel(rwptr_reg.bits32, TOE_GLOBAL_BASE + GLOBAL_HWFQ_RWPTR_REG);
++}
++
++/*----------------------------------------------------------------------
++* 	sl351x_gmac_release_hw_free_q
++*----------------------------------------------------------------------*/
++#ifdef CONFIG_SL351x_NAT
++static void sl351x_gmac_release_hwtx_q(void)
++{
++	int				i;
++	unsigned int	rwptr_addr;
++
++	rwptr_addr = TOE_GMAC0_DMA_BASE + GMAC_HW_TX_QUEUE0_PTR_REG;
++	for (i=0; ihwfq_desc_base;
++	buf_ptr = (unsigned int)toe->hwfq_buf_base_dma;
++	for (i=0; iword0.bits.buffer_size = HW_RX_BUF_SIZE;
++		desc_ptr->word1.bits.sw_id = i;
++		desc_ptr->word2.buf_adr = (unsigned int)buf_ptr;
++		desc_ptr++;
++		buf_ptr += HW_RX_BUF_SIZE;
++	}
++	rwptr.bits32 = readl(TOE_GLOBAL_BASE + GLOBAL_HWFQ_RWPTR_REG);
++	rwptr.bits.wptr = RWPTR_RECEDE_ONE(rwptr.bits.rptr, TOE_HW_FREEQ_DESC_NUM);
++	writel(rwptr.bits32, TOE_GLOBAL_BASE + GLOBAL_HWFQ_RWPTR_REG);
++	writel(0, TOE_GLOBAL_BASE + 0x4084);
++
++	// Enable Rx of GMAC-0 & 1
++	config0.bits32 = readl(TOE_GMAC0_BASE+GMAC_CONFIG0);
++	config0.bits.dis_rx = 0;
++	writel(config0.bits32, TOE_GMAC0_BASE+GMAC_CONFIG0);
++	config0.bits32 = readl(TOE_GMAC1_BASE+GMAC_CONFIG0);
++	config0.bits.dis_rx = 0;
++	writel(config0.bits32, TOE_GMAC1_BASE+GMAC_CONFIG0);
++}
++#endif
++#endif // CONFIG_SL351x_NAT
++
++#endif // SL351x_GMAC_WORKAROUND
++
++/* get the mac addresses from flash
++ *can't do this in module_init because mtd driver is initialized after ethernet
++ */
++static __init int sl351x_mac_address_init(void)
++{
++	GMAC_INFO_T		*tp;
++	struct sockaddr sock;
++	int i;
++
++	/* get mac address from FLASH */
++	gmac_get_mac_address();
++
++	for (i = 0; i < GMAC_NUM; i++) {
++		tp = (GMAC_INFO_T *)&toe_private_data.gmac[i];
++		memcpy(&sock.sa_data[0],ð_mac[tp->port_id][0],6);
++		gmac_set_mac_address(tp->dev,(void *)&sock);
++	}
++
++        return 0;
++}
++late_initcall(sl351x_mac_address_init);
++
++
+--- /dev/null
++++ b/drivers/net/sl351x_hash.c
+@@ -0,0 +1,713 @@
++/**************************************************************************
++* Copyright 2006 StorLink Semiconductors, Inc.  All rights reserved.
++*--------------------------------------------------------------------------
++* Name			: sl351x_hash.c
++* Description	:
++*		Handle Storlink SL351x Hash Functions
++*
++* History
++*
++*	Date		Writer		Description
++*----------------------------------------------------------------------------
++*	03/13/2006	Gary Chen	Create and implement
++*
++****************************************************************************/
++#include 
++#include 
++#include 
++#include 
++#include 
++#include 
++#include 
++#include 
++#include 
++#include 
++#include 
++#include 
++#include 
++#include 
++#include 
++#include 
++#include 
++#include 
++#include 
++#include 
++#include 
++#include 
++#include 
++#include 
++#include 
++#define	 MIDWAY
++#define	 SL_LEPUS
++
++#include 
++#include 
++#include 
++
++#ifndef RXTOE_DEBUG
++#define RXTOE_DEBUG
++#endif
++#undef RXTOE_DEBUG
++
++/*----------------------------------------------------------------------
++* Definition
++*----------------------------------------------------------------------*/
++#define	hash_printf				printk
++
++#define HASH_TIMER_PERIOD		(30)	// seconds
++#define HASH_ILLEGAL_INDEX		0xffff
++
++/*----------------------------------------------------------------------
++* Variables
++*----------------------------------------------------------------------*/
++u32					hash_nat_owner_bits[HASH_TOTAL_ENTRIES/32];
++char 				hash_tables[HASH_TOTAL_ENTRIES][HASH_MAX_BYTES] __attribute__ ((aligned(16)));
++static struct timer_list hash_timer_obj;
++LIST_HEAD(hash_timeout_list);
++
++/*----------------------------------------------------------------------
++* Functions
++*----------------------------------------------------------------------*/
++void dm_long(u32 location, int length);
++static void hash_timer_func(u32 data);
++
++/*----------------------------------------------------------------------
++* hash_init
++*----------------------------------------------------------------------*/
++void sl351x_hash_init(void)
++{
++	int i;
++	volatile u32 *dp1, *dp2, dword;
++
++	dp1 = (volatile u32 *) TOE_V_BIT_BASE;
++	dp2 = (volatile u32 *) TOE_A_BIT_BASE;
++
++	for (i=0; iindex, 1);
++//	printk("Dump hash key!\n");
++//	dump_hash_key(entry);
++	return entry->index;
++}
++
++/*----------------------------------------------------------------------
++* hash_set_valid_flag
++*----------------------------------------------------------------------*/
++void hash_set_valid_flag(int index, int valid)
++{
++	register u32 reg32;
++
++	reg32 = TOE_V_BIT_BASE + (index/32) * 4;
++
++	if (valid)
++	{
++		writel(readl(reg32) | (1 << (index%32)), reg32);
++	}
++	else
++	{
++		writel(readl(reg32) & ~(1 << (index%32)), reg32);
++	}
++}
++
++/*----------------------------------------------------------------------
++* hash_set_nat_owner_flag
++*----------------------------------------------------------------------*/
++void hash_set_nat_owner_flag(int index, int valid)
++{
++	if (valid)
++	{
++		hash_nat_owner_bits[index/32] |= (1 << (index % 32));
++	}
++	else
++	{
++		hash_nat_owner_bits[index/32] &= ~(1 << (index % 32));
++	}
++}
++
++
++/*----------------------------------------------------------------------
++* hash_build_keys
++*----------------------------------------------------------------------*/
++int hash_build_keys(u32 *destp, HASH_ENTRY_T *entry)
++{
++	u32 	data;
++	unsigned char 	*cp;
++	int				i, j;
++	unsigned short 	index;
++	int 			total;
++
++	memset((void *)destp, 0, HASH_MAX_BYTES);
++	cp = (unsigned char *)destp;
++
++	if (entry->key_present.port || entry->key_present.Ethertype)
++	{
++		HASH_PUSH_WORD(cp, entry->key.Ethertype);		// word 0
++		HASH_PUSH_BYTE(cp, entry->key.port);			// Byte 2
++		HASH_PUSH_BYTE(cp, 0);							// Byte 3
++	}
++	else
++	{
++		HASH_PUSH_DWORD(cp, 0);
++	}
++
++	if (entry->key_present.da || entry->key_present.sa)
++	{
++		unsigned char mac[4];
++		if (entry->key_present.da)
++		{
++			for (i=0; i<4; i++)
++				HASH_PUSH_BYTE(cp, entry->key.da[i]);
++		}
++		mac[0] = (entry->key_present.da) ? entry->key.da[4] : 0;
++		mac[1] = (entry->key_present.da) ? entry->key.da[5] : 0;
++		mac[2] = (entry->key_present.sa) ? entry->key.sa[0] : 0;
++		mac[3] = (entry->key_present.sa) ? entry->key.sa[1] : 0;
++		data = mac[0] + (mac[1]<<8) + (mac[2]<<16) + (mac[3]<<24);
++		HASH_PUSH_DWORD(cp, data);
++		if (entry->key_present.sa)
++		{
++			for (i=2; i<6; i++)
++				HASH_PUSH_BYTE(cp, entry->key.sa[i]);
++		}
++	}
++
++	if (entry->key_present.pppoe_sid || entry->key_present.vlan_id)
++	{
++		HASH_PUSH_WORD(cp, entry->key.vlan_id);		// low word
++		HASH_PUSH_WORD(cp, entry->key.pppoe_sid);	// high word
++	}
++	if (entry->key_present.ipv4_hdrlen || entry->key_present.ip_tos || entry->key_present.ip_protocol)
++	{
++		HASH_PUSH_BYTE(cp, entry->key.ip_protocol);		// Byte 0
++		HASH_PUSH_BYTE(cp, entry->key.ip_tos);			// Byte 1
++		HASH_PUSH_BYTE(cp, entry->key.ipv4_hdrlen);		// Byte 2
++		HASH_PUSH_BYTE(cp, 0);							// Byte 3
++	}
++
++	if (entry->key_present.ipv6_flow_label)
++	{
++		HASH_PUSH_DWORD(cp, entry->key.ipv6_flow_label);	// low word
++	}
++	if (entry->key_present.sip)
++	{
++		// input (entry->key.sip[i]) is network-oriented
++		// output (hash key) is host-oriented
++		for (i=3; i>=0; i--)
++			HASH_PUSH_BYTE(cp, entry->key.sip[i]);
++		if (entry->key.ipv6)
++		{
++			for (i=4; i<16; i+=4)
++			{
++				for (j=i+3; j>=i; j--)
++					HASH_PUSH_BYTE(cp, entry->key.sip[j]);
++			}
++		}
++	}
++	if (entry->key_present.dip)
++	{
++		// input (entry->key.sip[i]) is network-oriented
++		// output (hash key) is host-oriented
++		for (i=3; i>=0; i--)
++			HASH_PUSH_BYTE(cp, entry->key.dip[i]);
++		if (entry->key.ipv6)
++		{
++			for (i=4; i<16; i+=4)
++			{
++				for (j=i+3; j>=i; j--)
++					HASH_PUSH_BYTE(cp, entry->key.dip[j]);
++			}
++		}
++	}
++
++	if (entry->key_present.l4_bytes_0_3)
++	{
++		HASH_PUSH_BYTE(cp, entry->key.l4_bytes[0]);
++		HASH_PUSH_BYTE(cp, entry->key.l4_bytes[1]);
++		HASH_PUSH_BYTE(cp, entry->key.l4_bytes[2]);
++		HASH_PUSH_BYTE(cp, entry->key.l4_bytes[3]);
++	}
++	if (entry->key_present.l4_bytes_4_7)
++	{
++		HASH_PUSH_BYTE(cp, entry->key.l4_bytes[4]);
++		HASH_PUSH_BYTE(cp, entry->key.l4_bytes[5]);
++		HASH_PUSH_BYTE(cp, entry->key.l4_bytes[6]);
++		HASH_PUSH_BYTE(cp, entry->key.l4_bytes[7]);
++	}
++	if (entry->key_present.l4_bytes_8_11)
++	{
++		HASH_PUSH_BYTE(cp, entry->key.l4_bytes[8]);
++		HASH_PUSH_BYTE(cp, entry->key.l4_bytes[9]);
++		HASH_PUSH_BYTE(cp, entry->key.l4_bytes[10]);
++		HASH_PUSH_BYTE(cp, entry->key.l4_bytes[11]);
++	}
++	if (entry->key_present.l4_bytes_12_15)
++	{
++		HASH_PUSH_BYTE(cp, entry->key.l4_bytes[12]);
++		HASH_PUSH_BYTE(cp, entry->key.l4_bytes[13]);
++		HASH_PUSH_BYTE(cp, entry->key.l4_bytes[14]);
++		HASH_PUSH_BYTE(cp, entry->key.l4_bytes[15]);
++	}
++	if (entry->key_present.l4_bytes_16_19)
++	{
++		HASH_PUSH_BYTE(cp, entry->key.l4_bytes[16]);
++		HASH_PUSH_BYTE(cp, entry->key.l4_bytes[17]);
++		HASH_PUSH_BYTE(cp, entry->key.l4_bytes[18]);
++		HASH_PUSH_BYTE(cp, entry->key.l4_bytes[19]);
++	}
++	if (entry->key_present.l4_bytes_20_23)
++	{
++		HASH_PUSH_BYTE(cp, entry->key.l4_bytes[20]);
++		HASH_PUSH_BYTE(cp, entry->key.l4_bytes[21]);
++		HASH_PUSH_BYTE(cp, entry->key.l4_bytes[22]);
++		HASH_PUSH_BYTE(cp, entry->key.l4_bytes[23]);
++	}
++	if (entry->key_present.l7_bytes_0_3)
++	{
++		HASH_PUSH_BYTE(cp, entry->key.l7_bytes[0]);
++		HASH_PUSH_BYTE(cp, entry->key.l7_bytes[1]);
++		HASH_PUSH_BYTE(cp, entry->key.l7_bytes[2]);
++		HASH_PUSH_BYTE(cp, entry->key.l7_bytes[3]);
++	}
++	if (entry->key_present.l7_bytes_4_7)
++	{
++		HASH_PUSH_BYTE(cp, entry->key.l7_bytes[4]);
++		HASH_PUSH_BYTE(cp, entry->key.l7_bytes[5]);
++		HASH_PUSH_BYTE(cp, entry->key.l7_bytes[6]);
++		HASH_PUSH_BYTE(cp, entry->key.l7_bytes[7]);
++	}
++	if (entry->key_present.l7_bytes_8_11)
++	{
++		HASH_PUSH_BYTE(cp, entry->key.l7_bytes[8]);
++		HASH_PUSH_BYTE(cp, entry->key.l7_bytes[9]);
++		HASH_PUSH_BYTE(cp, entry->key.l7_bytes[10]);
++		HASH_PUSH_BYTE(cp, entry->key.l7_bytes[11]);
++	}
++	if (entry->key_present.l7_bytes_12_15)
++	{
++		HASH_PUSH_BYTE(cp, entry->key.l7_bytes[12]);
++		HASH_PUSH_BYTE(cp, entry->key.l7_bytes[13]);
++		HASH_PUSH_BYTE(cp, entry->key.l7_bytes[14]);
++		HASH_PUSH_BYTE(cp, entry->key.l7_bytes[15]);
++	}
++	if (entry->key_present.l7_bytes_16_19)
++	{
++		HASH_PUSH_BYTE(cp, entry->key.l7_bytes[16]);
++		HASH_PUSH_BYTE(cp, entry->key.l7_bytes[17]);
++		HASH_PUSH_BYTE(cp, entry->key.l7_bytes[18]);
++		HASH_PUSH_BYTE(cp, entry->key.l7_bytes[19]);
++	}
++	if (entry->key_present.l7_bytes_20_23)
++	{
++		HASH_PUSH_BYTE(cp, entry->key.l7_bytes[20]);
++		HASH_PUSH_BYTE(cp, entry->key.l7_bytes[21]);
++		HASH_PUSH_BYTE(cp, entry->key.l7_bytes[22]);
++		HASH_PUSH_BYTE(cp, entry->key.l7_bytes[23]);
++	}
++
++	// get hash index
++	total = (u32)((u32)cp - (u32)destp) / (sizeof(u32));
++
++	if (total > HASH_MAX_KEY_DWORD)
++	{
++		//hash_printf("Total key words (%d) is too large (> %d)!\n",
++		//				total, HASH_MAX_KEY_DWORD);
++		return -1;
++	}
++
++	if (entry->key_present.port || entry->key_present.Ethertype)
++		index = hash_gen_crc16((unsigned char *)destp, total * 4);
++	else
++	{
++		if (total == 1)
++		{
++			hash_printf("No key is assigned!\n");
++			return -1;
++		}
++
++		index = hash_gen_crc16((unsigned char *)(destp+1), (total-1) * 4);
++	}
++
++	entry->index = index & HASH_BITS_MASK;
++
++	//hash_printf("Total key words = %d, Hash Index= %d\n",
++	//				total, entry->index);
++
++	cp = (unsigned char *)destp;
++	cp+=3;
++	HASH_PUSH_BYTE(cp, entry->rule);	// rule
++
++	entry->total_dwords = total;
++
++	return total;
++}
++
++/*----------------------------------------------------------------------
++* hash_build_nat_keys
++*----------------------------------------------------------------------*/
++void hash_build_nat_keys(u32 *destp, HASH_ENTRY_T *entry)
++{
++	unsigned char 	*cp;
++	int				i;
++	unsigned short 	index;
++	int 			total;
++
++	memset((void *)destp, 0, HASH_MAX_BYTES);
++
++	cp = (unsigned char *)destp + 2;
++	HASH_PUSH_BYTE(cp, entry->key.port);
++	cp++;
++
++	if (entry->key_present.pppoe_sid || entry->key_present.vlan_id)
++	{
++		HASH_PUSH_WORD(cp, entry->key.vlan_id);		// low word
++		HASH_PUSH_WORD(cp, entry->key.pppoe_sid);	// high word
++	}
++
++	HASH_PUSH_BYTE(cp, entry->key.ip_protocol);
++	cp+=3;
++
++	// input (entry->key.sip[i]) is network-oriented
++	// output (hash key) is host-oriented
++	for (i=3; i>=0; i--)
++		HASH_PUSH_BYTE(cp, entry->key.sip[i]);
++
++	// input (entry->key.sip[i]) is network-oriented
++	// output (hash key) is host-oriented
++	for (i=3; i>=0; i--)
++		HASH_PUSH_BYTE(cp, entry->key.dip[i]);
++
++	HASH_PUSH_BYTE(cp, entry->key.l4_bytes[0]);
++	HASH_PUSH_BYTE(cp, entry->key.l4_bytes[1]);
++	HASH_PUSH_BYTE(cp, entry->key.l4_bytes[2]);
++	HASH_PUSH_BYTE(cp, entry->key.l4_bytes[3]);
++
++	// get hash index
++	total = (u32)((u32)cp - (u32)destp) / (sizeof(u32));
++
++	index = hash_gen_crc16((unsigned char *)destp, total * 4);
++	entry->index = index & ((1 << HASH_BITS) - 1);
++
++	cp = (unsigned char *)destp;
++	cp+=3;
++	HASH_PUSH_BYTE(cp, entry->rule);	// rule
++
++	entry->total_dwords = total;
++}
++
++/*----------------------------------------------------------------------
++* hash_build_toe_keys
++*----------------------------------------------------------------------*/
++int hash_build_toe_keys(u32 *destp, HASH_ENTRY_T *entry)
++{
++	unsigned long	data;
++	unsigned char	*cp;
++	unsigned short	index;
++	int	i;
++	int total;
++	//printk("%s\n", __func__);
++	memset((void*)destp, 0, HASH_MAX_BYTES);
++	cp = (unsigned char*)destp;
++
++	if(entry->key_present.port || entry->key_present.Ethertype) {
++		data = (entry->key.port << 16) + entry->key.Ethertype;
++		HASH_PUSH_DWORD(cp, data);
++	} else
++		HASH_PUSH_DWORD(cp, 0);
++
++	if (entry->key_present.da || entry->key_present.sa) {
++		unsigned char	mac[4];
++		if (entry->key_present.da) {
++			data = (entry->key.da[0]) + (entry->key.da[1] << 8) +
++				   (entry->key.da[2] << 16) + (entry->key.da[3] <<24);
++			HASH_PUSH_DWORD(cp, data);
++		}
++		mac[0] = (entry->key_present.da) ? entry->key.da[4] : 0;
++		mac[1] = (entry->key_present.da) ? entry->key.da[5] : 0;
++		mac[2] = (entry->key_present.sa) ? entry->key.sa[0] : 0;
++		mac[3] = (entry->key_present.sa) ? entry->key.sa[1] : 0;
++		data = mac[0] + (mac[1]<<8) + (mac[2]<<16) + (mac[3]<<24);
++		HASH_PUSH_DWORD(cp, data);
++		if (entry->key_present.sa) {
++			data = (entry->key.sa[2]) + (entry->key.sa[3] << 8) +
++				   (entry->key.sa[4] << 16) + (entry->key.sa[5] <<24);
++			HASH_PUSH_DWORD(cp, data);
++		}
++	}
++
++	if (entry->key_present.ip_protocol) {
++		unsigned char ip_protocol;
++		ip_protocol = entry->key.ip_protocol;
++		data = ip_protocol;
++		HASH_PUSH_DWORD(cp, data);
++	}
++
++	if (entry->key_present.ipv6_flow_label) {
++		unsigned long flow_label;
++		flow_label  = entry->key.ipv6_flow_label;
++		data = flow_label & 0xfffff;
++		HASH_PUSH_DWORD(cp, data);
++	}
++
++	if (entry->key_present.sip)	{
++		{
++			data = IPIV(entry->key.sip[0], entry->key.sip[1],
++					entry->key.sip[2], entry->key.sip[3]);
++			HASH_PUSH_DWORD(cp, data);
++			if (entry->key.ipv6) {
++				for (i=4; i<16; i+=4) {
++					data = IPIV(entry->key.sip[i+0], entry->key.sip[i+1],
++							entry->key.sip[i+2], entry->key.sip[i+3]);
++					HASH_PUSH_DWORD(cp, data);
++				}
++			}
++		}
++	}
++
++	if (entry->key_present.dip)	{
++		{
++			data = IPIV(entry->key.dip[0], entry->key.dip[1],
++						entry->key.dip[2], entry->key.dip[3]);
++			HASH_PUSH_DWORD(cp, data);
++			if (entry->key.ipv6) {
++				for (i=4; i<16; i+=4) {
++					data = IPIV(entry->key.dip[i+0], entry->key.dip[i+1],
++								entry->key.dip[i+2], entry->key.dip[i+3]);
++					HASH_PUSH_DWORD(cp, data);
++				}
++			}
++		}
++	}
++	if (entry->key_present.l4_bytes_0_3)
++	{
++		unsigned char *datap;
++		datap = &entry->key.l4_bytes[0];
++		data = 	datap[0] + 	(datap[1] << 8) + (datap[2] << 16) + (datap[3] << 24);
++		HASH_PUSH_DWORD(cp, data);
++	}
++	if (entry->key_present.l7_bytes_0_3)
++	{
++		unsigned char *datap;
++		datap = &entry->key.l7_bytes[0];
++		data = 	datap[0] + 	(datap[1] << 8) + (datap[2] << 16) + (datap[3] << 24);
++		HASH_PUSH_DWORD(cp, data);
++	}
++	if (entry->key_present.l7_bytes_4_7)
++	{
++		unsigned char *datap;
++		datap = &entry->key.l7_bytes[4];
++		data = 	datap[0] + 	(datap[1] << 8) + (datap[2] << 16) + (datap[3] << 24);
++		HASH_PUSH_DWORD(cp, data);
++	}
++
++	total = (unsigned long)((unsigned long)cp - (unsigned long)destp) / (sizeof(u32));
++	if (total > HASH_MAX_KEY_DWORD) {
++		//printf("Total key words (%d) is too large (> %d)!\n",
++		//		total, HASH_MAX_KEY_DWORD);
++		return -1;
++	}
++	index = hash_gen_crc16((unsigned char*)(destp + 1), (total-1)*4);
++	entry->index = index & ((1 << HASH_BITS)-1);
++
++	cp = (unsigned char*) destp;
++	cp += 3;
++	HASH_PUSH_BYTE(cp, entry->rule);
++	entry->total_dwords = total;
++	return total;
++}
++
++/*----------------------------------------------------------------------
++* hash_add_toe_entry
++*----------------------------------------------------------------------*/
++int hash_add_toe_entry(HASH_ENTRY_T *entry)
++{
++	int	rc;
++	u32	key[HASH_MAX_DWORDS];
++
++	rc = hash_build_toe_keys((u32 *)&key, entry);
++	if (rc < 0)
++		return -1;
++	hash_write_entry(entry, (unsigned char*) &key[0]);
++	//hash_dump_entry(entry->index);
++//	hash_set_valid_flag(entry->index, 1);
++//	printk("Dump hash key!\n");
++//	dump_hash_key(entry);
++	return entry->index;
++}
++
++
++/*----------------------------------------------------------------------
++* hash_write_entry
++*----------------------------------------------------------------------*/
++int hash_write_entry(HASH_ENTRY_T *entry, unsigned char *key)
++{
++	int		i;
++	u32		*srcep, *destp, *destp2;
++
++	srcep = (u32 *)key;
++	destp2 = destp = (u32 *)&hash_tables[entry->index][0];
++
++	for (i=0; i<(entry->total_dwords); i++, srcep++, destp++)
++		*destp = *srcep;
++
++	srcep = (u32 *)&entry->action;
++	*destp++ = *srcep;
++
++	srcep = (u32 *)&entry->param;
++	for (i=0; i<(sizeof(ENTRY_PARAM_T)/sizeof(*destp)); i++, srcep++, destp++)
++		*destp = *srcep;
++
++	memset(destp, 0, (HASH_MAX_DWORDS-entry->total_dwords-HASH_ACTION_DWORDS) * sizeof(u32));
++
++	consistent_sync(destp2, (entry->total_dwords+HASH_ACTION_DWORDS) * 4, PCI_DMA_TODEVICE);
++	return 0;
++}
++
++/*----------------------------------------------------------------------
++* hash_timer_func
++*----------------------------------------------------------------------*/
++static void hash_timer_func(u32 data)
++{
++	int					i, j, idx;
++	volatile u32		*own_p, *valid_p;
++	u32					own_bits, a_bits;
++	int					period = HASH_TIMER_PERIOD;
++
++	valid_p = (volatile u32 *)TOE_V_BIT_BASE;
++	own_p = (volatile u32 *)hash_nat_owner_bits;
++	for (i=0, idx=0; i<(HASH_TOTAL_ENTRIES/32); i++, own_p++, valid_p++, idx+=32)
++	{
++		a_bits = readl(TOE_A_BIT_BASE + (i*4));
++		own_bits = *own_p;
++		if (own_bits)
++		{
++			for (j=0; own_bits && j<32; j++)
++			{
++				if (own_bits & 1)
++				{
++					short *counter_p, *interval_p;
++					NAT_HASH_ENTRY_T	*nat_entry;
++					GRE_HASH_ENTRY_T	*gre_entry;
++					nat_entry = (NAT_HASH_ENTRY_T *)hash_get_entry(idx+j);
++					gre_entry = (GRE_HASH_ENTRY_T *)nat_entry;
++					if (nat_entry->key.ip_protocol == IPPROTO_GRE)
++					{
++						counter_p = (short *)&gre_entry->tmo.counter;
++						interval_p = (short *)&gre_entry->tmo.interval;
++					}
++					else
++					{
++						counter_p = (short *)&nat_entry->tmo.counter;
++						interval_p = (short *)&nat_entry->tmo.interval;
++					}
++					if (a_bits & 1)
++					{
++						*counter_p = *interval_p;
++					}
++					else
++					{
++						*counter_p -= HASH_TIMER_PERIOD;
++						if (*counter_p <= 0)
++						{
++							*valid_p &= ~(1 << j);		// invalidate it
++							*own_p &= ~(1 << j);		// release ownership for NAT
++							*counter_p = 0;
++							// hash_printf("%lu %s: Clear hash index: %d\n", jiffies/HZ, __func__, i*32+j);
++						}
++						else if (period > *counter_p)
++						{
++							period = *counter_p;
++						}
++					}
++				}
++				a_bits >>= 1;
++				own_bits >>=1;
++			}
++		}
++	}
++
++	hash_timer_obj.expires = jiffies + (period * HZ);
++	add_timer((struct timer_list *)data);
++}
++
++/*----------------------------------------------------------------------
++* dm_long
++*----------------------------------------------------------------------*/
++void dm_long(u32 location, int length)
++{
++	u32		*start_p, *curr_p, *end_p;
++	u32		*datap, data;
++	int		i;
++
++	//if (length > 1024)
++	//	length = 1024;
++
++	start_p = (u32 *)location;
++	end_p = (u32 *)location + length;
++	curr_p = (u32 *)((u32)location & 0xfffffff0);
++	datap = (u32 *)location;
++	while (curr_p < end_p)
++	{
++		hash_printf("0x%08x: ",(u32)curr_p & 0xfffffff0);
++		for (i=0; i<4; i++)
++		{
++			if (curr_p < start_p || curr_p >= end_p)
++               hash_printf("         ");
++			else
++			{
++				data = *datap;
++				hash_printf("%08X ", data);
++			}
++			if (i==1)
++              hash_printf("- ");
++
++			curr_p++;
++			datap++;
++		}
++        hash_printf("\n");
++	}
++}
++
++/*----------------------------------------------------------------------
++* hash_dump_entry
++*----------------------------------------------------------------------*/
++void hash_dump_entry(int index)
++{
++	hash_printf("Hash Index %d:\n", index);
++	dm_long((u32)&hash_tables[index][0], HASH_MAX_DWORDS);
++}
++
++
+--- /dev/null
++++ b/drivers/net/sl351x_nat.c
+@@ -0,0 +1,1736 @@
++/****************************************************************************
++* Copyright 2006 StorLink Semiconductors, Inc.  All rights reserved.
++*----------------------------------------------------------------------------
++* Name			: sl351x_nat.c
++* Description	:
++*		Handle Storlink SL351x NAT Functions
++*
++*
++* Packet Flow:
++*
++*            (xmit)+<--- SW NAT -->+(xmit)
++*                  |       ^^      |
++*                  |       ||      |
++*                  |       ||      |
++*   Client <---> GMAC-x  HW-NAT  GMAC-y  <---> Server
++*
++*
++* History
++*
++*	Date		Writer		Description
++*----------------------------------------------------------------------------
++*	03/13/2006	Gary Chen	Create and implement
++*
++*
++****************************************************************************/
++#include 
++#include 
++#include 
++#include 
++#include 
++#include 
++#include 
++#include 
++#include 
++#include 
++#include 
++#include 
++#include 
++#include 
++#include 
++#include 
++#include 
++#include 
++#include 
++#include 
++#include 
++#include 
++#include 
++#include 
++#include 
++#include 
++#include 
++#include 
++
++#define	 MIDWAY
++#define	 SL_LEPUS
++
++#include 
++#include 
++#include 
++#include 
++#ifdef CONFIG_NETFILTER
++// #include 
++#include 
++#endif
++
++//#define NAT_DEBUG_MSG		1
++#define _NOT_CHECK_SIP_DIP
++//#define	SL351x_NAT_TEST_BY_SMARTBITS		1	// Initialize 32 hash entries and test by SmartBITS
++#define VITESSE_G5SWITCH	1
++
++#ifdef CONFIG_SL351x_NAT
++
++/*----------------------------------------------------------------------
++* Definition
++*----------------------------------------------------------------------*/
++#ifdef CONFIG_SL3516_ASIC
++#define CONFIG_SL351x_NAT_TCP_UDP
++#define CONFIG_SL351x_NAT_GRE
++#define CONFIG_SL351x_TCP_UDP_RULE_ID	0
++#define CONFIG_SL351x_GRE_RULE_ID		1
++#else
++#define CONFIG_SL351x_NAT_TCP_UDP
++//#define CONFIG_SL351x_NAT_GRE
++#define CONFIG_SL351x_TCP_UDP_RULE_ID	0
++#define CONFIG_SL351x_GRE_RULE_ID		0
++#endif
++
++#define	nat_printf					printk
++#define NAT_FTP_CTRL_PORT 			(21)	// TCP
++#define NAT_H323_PORT				(1720)	// TCP
++#define NAT_T120_PORT				(1503)	// TCP
++#define NAT_PPTP_PORT				(1723)	// TCP
++#define NAT_TFTP_PORT 				(69)	// UDP
++#define NAT_DNS_PORT 				(53)	// UDP
++#define NAT_NTP_PORT				(123)	// UDP
++#define NAT_RAS_PORT				(1719)	// UDP
++#define NAT_BOOTP67_PORT			(67)	// UDP
++#define NAT_BOOTP68_PORT			(68)	// UDP
++
++#define NAT_TCP_PORT_MAX			64
++#define NAT_UDP_PORT_MAX			64
++
++#define GRE_PROTOCOL				(0x880b)
++#define GRE_PROTOCOL_SWAP			__constant_htons(0x880b)
++
++#ifdef VITESSE_G5SWITCH
++extern int Giga_switch;
++#endif
++
++typedef struct
++{
++	u16		flags_ver;
++	u16		protocol;
++	u16		payload_length;
++	u16		call_id;
++	u32		seq;
++	u32		ack;
++} GRE_PKTHDR_T;
++
++/*----------------------------------------------------------------------
++* NAT Configuration
++*
++* Note: Any change for network setting, the NAT configuration should
++*       be changed also.
++*	cfg->lan_port	0 if GMAC-0, 1: if GMAC-1
++*	cfg->wan_port	0 if GMAC-0, 1: if GMAC-1
++*	cfg->lan_ipaddr, cfg->lan_gateway, cfg->lan_netmask
++*	cfg->wan_ipaddr, cfg->wan_gateway, cfg->wan_netmask
++*
++*----------------------------------------------------------------------*/
++NAT_CFG_T 		nat_cfg;
++static int		nat_initialized;
++u32 			nat_collision;
++
++#ifdef CONFIG_SL351x_NAT_TCP_UDP
++static u16		fixed_tcp_port_list[]={NAT_FTP_CTRL_PORT,
++							   			NAT_H323_PORT,
++							   			// NAT_T120_PORT,
++							   			NAT_PPTP_PORT,
++										0};
++static u16		fixed_udp_port_list[]={NAT_DNS_PORT,
++									  	NAT_NTP_PORT,
++									  	NAT_TFTP_PORT,
++										NAT_RAS_PORT,
++									  	NAT_BOOTP67_PORT,
++									  	NAT_BOOTP68_PORT,
++									   	0};
++#endif
++
++// #define _HAVE_DYNAMIC_PORT_LIST
++#ifdef _HAVE_DYNAMIC_PORT_LIST
++static u16		dynamic_tcp_port_list[NAT_TCP_PORT_MAX+1];
++static u16		dynamic_udp_port_list[NAT_UDP_PORT_MAX+1]};
++#endif
++
++/*----------------------------------------------------------------------
++* Functions
++*----------------------------------------------------------------------*/
++int sl351x_nat_tcp_udp_output(struct sk_buff *skb, int port);
++int sl351x_nat_udp_output(struct sk_buff *skb, int port);
++int sl351x_nat_gre_output(struct sk_buff *skb, int port);
++
++extern int mac_set_rule_reg(int mac, int rule, int enabled, u32 reg0, u32 reg1, u32 reg2);
++extern void hash_dump_entry(int index);
++extern void mac_get_hw_tx_weight(struct net_device *dev, char *weight);
++extern void mac_set_hw_tx_weight(struct net_device *dev, char *weight);
++
++#ifdef SL351x_NAT_TEST_BY_SMARTBITS
++static void nat_init_test_entry(void);
++#endif
++/*----------------------------------------------------------------------
++* sl351x_nat_init
++*	initialize a NAT matching rule
++*	Called by SL351x Driver
++*		key		: port, protocol, Sip, Dip, Sport, Dport
++*		Action	: Srce Q: HW Free Queue,
++*				  Dest Q: HW TxQ
++*				  Change DA
++*				  Change SA
++*                 Change Sip or Dip
++*    			  Change Sport or Dport
++*----------------------------------------------------------------------*/
++void sl351x_nat_init(void)
++{
++	int					rc;
++	GMAC_MRxCR0_T		mrxcr0;
++	GMAC_MRxCR1_T		mrxcr1;
++	GMAC_MRxCR2_T		mrxcr2;
++	NAT_CFG_T			*cfg;
++
++	if (nat_initialized)
++		return;
++
++	nat_initialized = 1;
++
++	if ((sizeof(NAT_HASH_ENTRY_T) > HASH_MAX_BYTES) ||
++		(sizeof(GRE_HASH_ENTRY_T) > HASH_MAX_BYTES))
++	{
++		nat_printf("NAT_HASH_ENTRY_T structure Size is too larger!\n");
++		while(1);
++	}
++
++	cfg = (NAT_CFG_T *)&nat_cfg;
++	memset((void *)cfg, 0, sizeof(NAT_CFG_T));
++#ifdef _HAVE_DYNAMIC_PORT_LIST
++	memset((void *)dynamic_tcp_port_list, 0, sizeof(dynamic_tcp_port_list));
++	memset((void *)dynamic_udp_port_list, 0, sizeof(dynamic_udp_port_list));
++#endif
++
++#ifdef VITESSE_G5SWITCH
++	if(Giga_switch)
++	{
++		cfg->enabled			= 1;
++		cfg->tcp_udp_rule_id 	= CONFIG_SL351x_TCP_UDP_RULE_ID;
++		cfg->gre_rule_id 		= CONFIG_SL351x_GRE_RULE_ID;
++		cfg->lan_port			= 1;
++		cfg->wan_port			= 0;
++		cfg->default_hw_txq 	= 3;
++		cfg->tcp_tmo_interval 	= 60;
++		cfg->udp_tmo_interval 	= 180;
++		cfg->gre_tmo_interval 	= 60;
++	}
++	else
++	{
++		cfg->enabled			= 1;
++		cfg->tcp_udp_rule_id 	= CONFIG_SL351x_TCP_UDP_RULE_ID;
++		cfg->gre_rule_id 		= CONFIG_SL351x_GRE_RULE_ID;
++		cfg->lan_port			= 0;
++		cfg->wan_port			= 1;
++		cfg->default_hw_txq 	= 3;
++		cfg->tcp_tmo_interval 	= 60;
++		cfg->udp_tmo_interval 	= 180;
++		cfg->gre_tmo_interval 	= 60;
++
++	}
++#endif
++
++#if 1	//	debug purpose
++	cfg->ipcfg[0].total				= 1;
++	cfg->ipcfg[0].entry[0].ipaddr	= IPIV(192,168,2,92);
++	cfg->ipcfg[0].entry[0].netmask	= IPIV(255,255,255,0);
++	cfg->ipcfg[1].total				= 1;
++	cfg->ipcfg[1].entry[0].ipaddr	= IPIV(192,168,1,200);
++	cfg->ipcfg[1].entry[0].netmask	= IPIV(255,255,255,0);
++#endif
++
++#if 1
++	cfg->xport.total = 0;
++#else
++	cfg->xport.total = 4;
++
++	// H.323/H.225 Call setup
++	cfg->xport.entry[0].protocol = IPPROTO_TCP;
++	cfg->xport.entry[0].sport_start = 0;
++	cfg->xport.entry[0].sport_end = 0;
++	cfg->xport.entry[0].dport_start = 1720;
++	cfg->xport.entry[0].dport_end = 1720;
++	cfg->xport.entry[1].protocol = IPPROTO_TCP;
++	cfg->xport.entry[1].sport_start = 1720;
++	cfg->xport.entry[1].sport_end = 1720;
++	cfg->xport.entry[1].dport_start = 0;
++	cfg->xport.entry[1].dport_end = 0;
++
++	// RAS Setup
++	cfg->xport.entry[2].protocol = IPPROTO_UDP;
++	cfg->xport.entry[2].sport_start = 0;
++	cfg->xport.entry[2].sport_end = 0;
++	cfg->xport.entry[2].dport_start = 1719;
++	cfg->xport.entry[2].dport_end = 1719;
++	cfg->xport.entry[3].protocol = IPPROTO_UDP;
++	cfg->xport.entry[3].sport_start = 1719;
++	cfg->xport.entry[3].sport_end = 1719;
++	cfg->xport.entry[3].dport_start = 0;
++	cfg->xport.entry[3].dport_end = 0;
++#endif
++
++#ifdef CONFIG_SL351x_NAT_TCP_UDP
++	mrxcr0.bits32 = 0;
++	mrxcr1.bits32 = 0;
++	mrxcr2.bits32 = 0;
++	mrxcr0.bits.port = 1;
++	mrxcr0.bits.l3 = 1;
++	mrxcr0.bits.l4 = 1;
++	mrxcr1.bits.sip = 1;
++	mrxcr1.bits.dip = 1;
++	mrxcr1.bits.l4_byte0_15 = 0x0f;	// Byte 0-3
++	mrxcr0.bits.sprx = 3;
++
++	rc = mac_set_rule_reg(cfg->lan_port, cfg->tcp_udp_rule_id, 1, mrxcr0.bits32, mrxcr1.bits32, mrxcr2.bits32);
++	if (rc < 0)
++	{
++		nat_printf("NAT Failed to set MAC-%d Rule %d!\n", cfg->lan_port, cfg->tcp_udp_rule_id);
++	}
++
++	if (cfg->lan_port != cfg->wan_port)
++	{
++		rc = mac_set_rule_reg(cfg->wan_port, cfg->tcp_udp_rule_id, 1, mrxcr0.bits32, mrxcr1.bits32, mrxcr2.bits32);
++		if (rc < 0)
++		{
++			nat_printf("NAT Failed to set MAC-%d Rule %d!\n", cfg->wan_port, cfg->tcp_udp_rule_id);
++		}
++	}
++#endif
++
++#ifdef CONFIG_SL351x_NAT_GRE
++	mrxcr0.bits32 = 0;
++	mrxcr1.bits32 = 0;
++	mrxcr2.bits32 = 0;
++	mrxcr0.bits.port = 1;
++	mrxcr0.bits.l3 = 1;
++	mrxcr0.bits.l4 = 1;
++	mrxcr1.bits.sip = 1;
++	mrxcr1.bits.dip = 1;
++	mrxcr1.bits.l4_byte0_15 = 0xcc;	// Byte 2, 3, 6, 7
++	mrxcr0.bits.sprx = 4;			// see GMAC driver about SPR
++
++	rc = mac_set_rule_reg(cfg->lan_port, cfg->gre_rule_id, 1, mrxcr0.bits32, mrxcr1.bits32, mrxcr2.bits32);
++	if (rc < 0)
++	{
++		nat_printf("NAT Failed to set MAC-%d Rule %d!\n", cfg->lan_port, cfg->gre_rule_id);
++	}
++
++	if (cfg->lan_port != cfg->wan_port)
++	{
++		rc = mac_set_rule_reg(cfg->wan_port, cfg->gre_rule_id, 1, mrxcr0.bits32, mrxcr1.bits32, mrxcr2.bits32);
++		if (rc < 0)
++		{
++			nat_printf("NAT Failed to set MAC-%d Rule %d!\n", cfg->wan_port, cfg->gre_rule_id);
++		}
++	}
++#endif
++
++#ifdef SL351x_NAT_TEST_BY_SMARTBITS
++	nat_init_test_entry();
++#endif
++}
++
++/*----------------------------------------------------------------------
++* nat_build_keys
++*	Note: To call this routine, the key->rule_id MUST be zero
++*----------------------------------------------------------------------*/
++static inline int nat_build_keys(NAT_KEY_T *key)
++{
++	return hash_gen_crc16((unsigned char *)key, NAT_KEY_SIZE) & HASH_BITS_MASK;
++}
++
++/*----------------------------------------------------------------------
++* gre_build_keys
++*	Note: To call this routine, the key->rule_id MUST be zero
++*----------------------------------------------------------------------*/
++static inline int gre_build_keys(GRE_KEY_T *key)
++{
++	return hash_gen_crc16((unsigned char *)key, GRE_KEY_SIZE) & HASH_BITS_MASK;
++}
++
++/*----------------------------------------------------------------------
++* nat_write_hash_entry
++*----------------------------------------------------------------------*/
++static inline int nat_write_hash_entry(int index, void *hash_entry)
++{
++	int		i;
++	u32		*srcep, *destp, *destp2;
++
++	srcep = (u32 *)hash_entry;
++	destp = destp2 = (u32 *)&hash_tables[index][0];
++
++	for (i=0; i<(NAT_HASH_ENTRY_SIZE/sizeof(u32)); i++)
++		*destp++ = *srcep++;
++
++	consistent_sync(destp2, NAT_HASH_ENTRY_SIZE, PCI_DMA_TODEVICE);
++	return 0;
++}
++
++/*----------------------------------------------------------------------
++* gre_write_hash_entry
++*----------------------------------------------------------------------*/
++static inline int gre_write_hash_entry(int index, void *hash_entry)
++{
++	int		i;
++	u32		*srcep, *destp, *destp2;
++
++	srcep = (u32 *)hash_entry;
++	destp = destp2 = (u32 *)&hash_tables[index][0];
++
++	for (i=0; i<(GRE_HASH_ENTRY_SIZE/sizeof(u32)); i++)
++		*destp++ = *srcep++;
++
++	consistent_sync(destp2, GRE_HASH_ENTRY_SIZE, PCI_DMA_TODEVICE);
++	return 0;
++}
++
++/*----------------------------------------------------------------------
++* sl351x_nat_find_ipcfg
++*	return NULL if not found
++*----------------------------------------------------------------------*/
++static NAT_IP_ENTRY_T *sl351x_nat_find_ipcfg(u32 ipaddr, int port)
++{
++	int				i;
++	NAT_IP_ENTRY_T	*ipcfg;
++
++	ipcfg = (NAT_IP_ENTRY_T *)&nat_cfg.ipcfg[port].entry[0];
++	for (i=0; iipaddr)
++		{
++			return ipcfg;
++		}
++	}
++	return NULL;
++}
++
++/*----------------------------------------------------------------------
++* sl351x_nat_assign_qid
++*----------------------------------------------------------------------*/
++static int sl351x_nat_assign_qid(u8 proto, u32 sip, u32 dip, u16 sport, u16 dport)
++{
++	int 				i, total, qid;
++	NAT_WRULE_ENTRY_T	*entry;
++
++	for (qid = 0; qidprotocol || entry->protocol==proto)
++			{
++				//if (!entry->sip_start && !entry->dip_start && !entry->sport_start && !entry->dport_start)
++				//	continue; // UI take care
++				if (entry->sip_start && !((sip >= entry->sip_start) &&
++									   (sip <= entry->sip_end)))
++					continue;
++				if (entry->dip_start && !((dip >= entry->dip_start) &&
++									   (dip <= entry->dip_end)))
++					continue;
++				if (entry->sport_start && !((sport >= entry->sport_start) &&
++									   (sport <= entry->sport_end)))
++					continue;
++				if (entry->dport_start && !((dport >= entry->dport_start)
++					 			       && (dport <= entry->dport_end)))
++					continue;
++				return qid;
++			}
++		}
++	}
++	return nat_cfg.default_hw_txq;
++}
++
++/*----------------------------------------------------------------------
++* sl351x_nat_input
++*	Handle NAT input frames
++*	Called by SL351x Driver - Handle Default Rx Queue
++*	Notes: The caller must make sure that the l3off & l4offset should not be zero.
++*	SL351x NAT Frames should meet the following conditions:
++*	1. TCP or UDP frame
++*	2. Cannot be special ALGs ports which TCP/UDP data is updated
++*	3. LAN-IN Frames:
++*		Source IP is in the LAN subnet and Destination is not in the LAN subnet
++*	4. WAN-IN Frames
++*		Destination IP is in the WAN port IP
++*
++*	Example Ports
++*	1. TCP/UDP data is updated
++*		(a) FTP Control Packet
++*		(b) VoIP Packets
++*		(c) etc. (add in future)
++*	2. UDP Low packet rate, not worth
++*		(b) TFTP Destination Port is 69
++*		(b) DNS  53
++*		(c) NTP  123
++*		(d) etc. (add in future)
++*----------------------------------------------------------------------*/
++void sl351x_nat_input(struct sk_buff *skb, int port, void *l3off, void *l4off)
++{
++	int 				i, found;
++	u32					sip, dip;
++	u16					sport, dport;
++	struct ethhdr		*ether_hdr;
++	struct iphdr		*ip_hdr;
++	struct tcphdr		*tcp_hdr;
++	struct pppoe_hdr	*pppoe_hdr;
++	NAT_CB_T			*nat_cb;
++	u8					proto, pppoe_frame=0;
++	NAT_CFG_T			*cfg;
++	u16					ppp_proto;
++	NAT_IP_ENTRY_T		*ipcfg;
++	NAT_XPORT_ENTRY_T	*xentry;
++	GRE_PKTHDR_T		*gre_hdr;
++#ifdef CONFIG_SL351x_NAT_TCP_UDP
++	u16 				*port_ptr;
++#endif
++
++	cfg = (NAT_CFG_T *)&nat_cfg;
++	if (!cfg->enabled || !cfg->ipcfg[port].total)
++		return;
++
++	ip_hdr = (struct iphdr *)&(skb->data[(u32)l3off]);
++	proto = ip_hdr->protocol;
++
++	tcp_hdr = (struct tcphdr *)&(skb->data[(u32)l4off]);
++	gre_hdr = (GRE_PKTHDR_T *)tcp_hdr;
++	sport = ntohs(tcp_hdr->source);
++	dport = ntohs(tcp_hdr->dest);
++
++	sip = ntohl(ip_hdr->saddr);
++	dip = ntohl(ip_hdr->daddr);
++
++	if (dip == IPIV(255,255,255,255))
++		return;
++
++	if (port == cfg->lan_port)
++	{
++		ipcfg = (NAT_IP_ENTRY_T *)&cfg->ipcfg[port].entry[0];
++		for (i=0, found=0; iipcfg[port].total; i++, ipcfg++)
++		{
++			u32 subnet = ipcfg->ipaddr & ipcfg->netmask;
++			if (((sip & ipcfg->netmask) == subnet) &&
++				((dip & ipcfg->netmask) != subnet))
++			{
++				found = 1;
++				break;
++			}
++		}
++		if (!found)
++			return;
++	}
++	else
++	{
++#ifndef _NOT_CHECK_SIP_DIP	// enable it if know and get the wan ip address
++		if (!sl351x_nat_find_ipcfg(dip, port))
++		{
++			printk("WAN->LAN Incorrect Dip %d.%d.%d.%d\n", HIPQUAD(dip));
++			return;
++		}
++#endif
++		ether_hdr = (struct ethhdr *)skb->data;
++		pppoe_hdr = (struct pppoe_hdr *)(ether_hdr + 1);
++		ppp_proto = *(u16 *)&pppoe_hdr->tag[0];
++		if (ether_hdr->h_proto == __constant_htons(ETH_P_PPP_SES)	// 0x8864
++			&& ppp_proto == __constant_htons(PPP_IP) )				// 0x21
++		{
++			pppoe_frame = 1;
++		}
++	}
++
++#ifdef CONFIG_SL351x_NAT_TCP_UDP
++	if (proto == IPPROTO_TCP)
++	{
++#ifdef	NAT_DEBUG_MSG
++		nat_printf("From   GMAC-%d: 0x%-4X TCP %d.%d.%d.%d [%d] --> %d.%d.%d.%d [%d]",
++				port, ntohs(ip_hdr->id),
++				NIPQUAD(ip_hdr->saddr), sport,
++				NIPQUAD(ip_hdr->daddr), dport);
++		if (tcp_flag_word(tcp_hdr) & TCP_FLAG_SYN) nat_printf(" SYN");
++		if (tcp_flag_word(tcp_hdr) & TCP_FLAG_FIN) nat_printf(" FIN");
++		if (tcp_flag_word(tcp_hdr) & TCP_FLAG_RST) nat_printf(" RST");
++		if (tcp_flag_word(tcp_hdr) & TCP_FLAG_ACK) nat_printf(" ACK");
++		nat_printf("\n");
++#endif
++		// if (tcp_flag_word(tcp_hdr) & (TCP_FLAG_SYN | TCP_FLAG_FIN | TCP_FLAG_RST))
++		if (tcp_flag_word(tcp_hdr) & (TCP_FLAG_SYN))
++		{
++			return;
++		}
++		port_ptr = fixed_tcp_port_list;
++		for (i=0; *port_ptr; i++, port_ptr++)
++		{
++			if (sport == *port_ptr || dport == *port_ptr)
++				return;
++		}
++#ifdef _HAVE_DYNAMIC_PORT_LIST
++		port_ptr = dynamic_tcp_port_list;
++		for (i=0; *port_ptr; i++, port_ptr++)
++		{
++			if (sport == *port_ptr || dport == *port_ptr)
++				return;
++		}
++#endif
++	}
++	else if (proto == IPPROTO_UDP)
++	{
++#ifdef	NAT_DEBUG_MSG
++		nat_printf("From   GMAC-%d: 0x%-4X UDP %d.%d.%d.%d [%d] --> %d.%d.%d.%d [%d]",
++				port, ntohs(ip_hdr->id),
++				NIPQUAD(ip_hdr->saddr), sport,
++				NIPQUAD(ip_hdr->daddr), dport);
++		nat_printf("\n");
++#endif
++		port_ptr = fixed_udp_port_list;
++		for (i=0; *port_ptr; i++, port_ptr++)
++		{
++			if (sport == *port_ptr || dport == *port_ptr)
++				return;
++		}
++#ifdef _HAVE_DYNAMIC_PORT_LIST
++		port_ptr = dynamic_udp_port_list;
++		for (i=0; *port_ptr; i++, port_ptr++)
++		{
++			if (sport == *port_ptr || dport == *port_ptr)
++				return;
++		}
++#endif
++	}
++	else
++#endif	// CONFIG_SL351x_NAT_TCP_UDP
++#ifdef CONFIG_SL351x_NAT_GRE
++	if (proto == IPPROTO_GRE)
++	{
++		if (gre_hdr->protocol != GRE_PROTOCOL_SWAP)
++			return;
++#ifdef	NAT_DEBUG_MSG
++		nat_printf("From   GMAC-%d: 0x%-4X GRE %d.%d.%d.%d [%d] --> %d.%d.%d.%d",
++				port, ntohs(ip_hdr->id),
++				NIPQUAD(ip_hdr->saddr), ntohs(gre_hdr->call_id),
++				NIPQUAD(ip_hdr->daddr));
++		nat_printf("\n");
++#endif
++	}
++	else
++#endif
++		return;
++
++
++	// check xport list
++	xentry = (NAT_XPORT_ENTRY_T *)&cfg->xport.entry[0];
++	for (i=0; ixport.total; i++, xentry++)
++	{
++		if (!xentry->protocol || xentry->protocol == proto)
++		{
++			//if (!xentry->sport_start && !xentry->dport_start) // UI take care
++			//	continue;
++			if (xentry->sport_start && !((sport >= xentry->sport_start) &&
++									   (sport <= xentry->sport_end)))
++				continue;
++			if (xentry->dport_start && !((dport >= xentry->dport_start)
++					 			       && (dport <= xentry->dport_end)))
++				continue;
++			return;
++		}
++	}
++
++	nat_cb = NAT_SKB_CB(skb);
++	if (((u32)nat_cb & 3))
++	{
++		nat_printf("%s ERROR! nat_cb is not alignment!!!!!!\n", __func__);
++		return;
++	}
++	nat_cb->tag = NAT_CB_TAG;
++	memcpy(nat_cb->sa, skb->data+6, 6);
++	nat_cb->sip = ip_hdr->saddr;
++	nat_cb->dip = ip_hdr->daddr;
++	if (proto == IPPROTO_GRE)
++	{
++		nat_cb->sport = gre_hdr->protocol;
++		nat_cb->dport = gre_hdr->call_id;
++	}
++	else
++	{
++		nat_cb->sport = tcp_hdr->source;
++		nat_cb->dport = tcp_hdr->dest;
++	}
++	nat_cb->pppoe_frame = pppoe_frame;
++}
++
++/*----------------------------------------------------------------------
++* sl351x_nat_output
++*	Handle NAT output frames
++*	Called by SL351x Driver - Transmit
++*
++*	1. If not SL351x NAT frames, return FALSE
++*	2. LAN-to-WAN frames
++*		(1) Sip must be WAN IP
++*	3. If TCP SY/RST/FIN frame, return
++*	4. Build the hash key and get the hash index
++*	5. If V-Bit is ON, return.
++*	6. Write hash entry and validate it
++*
++*----------------------------------------------------------------------*/
++int sl351x_nat_output(struct sk_buff *skb, int port)
++{
++	struct iphdr		*ip_hdr;
++	u8					proto;
++	NAT_CB_T			*nat_cb;
++
++	nat_cb = NAT_SKB_CB(skb);
++	if (nat_cb->tag != NAT_CB_TAG)
++		return 0;
++
++	if (((u32)nat_cb & 3))
++	{
++		nat_printf("%s ERROR! nat_cb is not alignment!!!!!!\n", __func__);
++		return 0;
++	}
++	ip_hdr = (struct iphdr *)skb->h.ipiph;
++	proto = ip_hdr->protocol;
++
++	switch (proto)
++	{
++		case IPPROTO_TCP:
++		case IPPROTO_UDP:
++			return sl351x_nat_tcp_udp_output(skb, port);
++		case IPPROTO_GRE:
++			return sl351x_nat_gre_output(skb, port);
++	}
++	return 0;
++}
++
++/*----------------------------------------------------------------------
++* sl351x_nat_tcp_udp_output
++*	Handle NAT TCP/UDP output frames
++*----------------------------------------------------------------------*/
++int sl351x_nat_tcp_udp_output(struct sk_buff *skb, int port)
++{
++	u32					sip, dip;
++	struct ethhdr		*ether_hdr;
++	struct iphdr		*ip_hdr;
++	struct tcphdr		*tcp_hdr;
++	struct pppoe_hdr	*pppoe_hdr;
++	NAT_CB_T			*nat_cb;
++	NAT_CFG_T			*cfg;
++	u8					proto;
++	u16					sport, dport, ppp_proto;
++	u32					hash_data[HASH_MAX_DWORDS];
++	NAT_HASH_ENTRY_T	*hash_entry;
++	int					hash_index;
++	struct ip_conntrack *nat_ip_conntrack;
++	enum ip_conntrack_info ctinfo;
++
++	nat_cb = NAT_SKB_CB(skb);
++	cfg = (NAT_CFG_T *)&nat_cfg;
++
++	ether_hdr = (struct ethhdr *)skb->data;
++	ip_hdr = (struct iphdr *)skb->h.ipiph;
++	tcp_hdr = (struct tcphdr *)((u32)ip_hdr + (ip_hdr->ihl<<2));
++	sip = ntohl(ip_hdr->saddr);
++	dip = ntohl(ip_hdr->daddr);
++	proto = ip_hdr->protocol;
++	sport = ntohs(tcp_hdr->source);
++	dport = ntohs(tcp_hdr->dest);
++
++#ifdef	NAT_DEBUG_MSG
++	{
++		nat_printf("To   GMAC-%d: 0x%-4X [%d] %d.%d.%d.%d [%d] --> %d.%d.%d.%d [%d]",
++				port, ntohs(ip_hdr->id), proto,
++				NIPQUAD(ip_hdr->saddr), sport,
++				NIPQUAD(ip_hdr->daddr), dport);
++		if (proto == IPPROTO_TCP)
++		{
++			if (tcp_flag_word(tcp_hdr) & TCP_FLAG_SYN) nat_printf(" SYN");
++			if (tcp_flag_word(tcp_hdr) & TCP_FLAG_FIN) nat_printf(" FIN");
++			if (tcp_flag_word(tcp_hdr) & TCP_FLAG_RST) nat_printf(" RST");
++			if (tcp_flag_word(tcp_hdr) & TCP_FLAG_ACK) nat_printf(" ACK");
++		}
++		nat_printf("\n");
++	}
++#endif
++	nat_ip_conntrack = ip_conntrack_get(skb, &ctinfo);
++	if (!nat_ip_conntrack)
++	{
++		nat_printf("IP conntrack info is not found!\n");
++		return 0;
++	}
++	// nat_printf("nat_ip_conntrack = 0x%x, status=0x%lx, ctinfo=%d\n", (u32)nat_ip_conntrack, nat_ip_conntrack->status, ctinfo);
++	// if (nat_ip_conntrack->master || nat_ip_conntrack->helper)
++	if (nat_ip_conntrack->helper)
++	{
++		nat_printf("Sport=%d Dport=%d master=0x%x, helper=0x%x\n", sport, dport, (u32)nat_ip_conntrack->master, (u32)nat_ip_conntrack->helper);
++		return 0;
++	}
++
++	//if (proto == IPPROTO_TCP && !(nat_ip_conntrack->status & IPS_ASSURED))
++	//	return 0;
++
++#ifdef	NAT_DEBUG_MSG
++	nat_printf("nat_ip_conntrack=0x%x, nat_cb->state=%d\n", (u32)nat_ip_conntrack, nat_cb->state);
++	nat_printf("lan2wan_hash_index=%d,  wan2lan_hash_index=%d\n", nat_ip_conntrack->lan2wan_hash_index, nat_ip_conntrack->wan2lan_hash_index);
++	nat_printf("lan2wan_collision=%d, wan2lan_collision=%d\n", nat_ip_conntrack->lan2wan_collision, nat_ip_conntrack->wan2lan_collision);
++#endif
++	if (proto == IPPROTO_TCP)
++	{
++		if (nat_cb->state >= TCP_CONNTRACK_FIN_WAIT && nat_cb->state <= TCP_CONNTRACK_CLOSE)
++		{
++			if 	(nat_ip_conntrack->lan2wan_hash_index)
++			{
++#ifdef	NAT_DEBUG_MSG
++				nat_printf("Invalidate LAN->WAN hash entry %d\n", nat_ip_conntrack->lan2wan_hash_index - 1);
++#endif
++				hash_nat_disable_owner(nat_ip_conntrack->lan2wan_hash_index - 1);
++				hash_invalidate_entry(nat_ip_conntrack->lan2wan_hash_index - 1);
++				nat_ip_conntrack->lan2wan_hash_index = 0;
++			}
++			if 	(nat_ip_conntrack->wan2lan_hash_index)
++			{
++#ifdef	NAT_DEBUG_MSG
++				nat_printf("Invalidate WAN->LAN hash entry %d\n", nat_ip_conntrack->wan2lan_hash_index - 1);
++#endif
++				hash_nat_disable_owner(nat_ip_conntrack->wan2lan_hash_index - 1);
++				hash_invalidate_entry(nat_ip_conntrack->wan2lan_hash_index - 1);
++				nat_ip_conntrack->wan2lan_hash_index = 0;
++			}
++			return 0;
++
++		}
++		else if (nat_cb->state != TCP_CONNTRACK_ESTABLISHED)
++		{
++			return 0;
++		}
++	}
++	if (proto == IPPROTO_TCP && (tcp_flag_word(tcp_hdr) & (TCP_FLAG_SYN | TCP_FLAG_FIN | TCP_FLAG_RST)))
++	// if (proto == IPPROTO_TCP &&  (tcp_flag_word(tcp_hdr) & (TCP_FLAG_SYN)))
++		return 0;
++
++	hash_entry = (NAT_HASH_ENTRY_T *)&hash_data;
++	if (port == cfg->wan_port)	// LAN-to-WAN
++	{
++		if (nat_ip_conntrack->lan2wan_hash_index || nat_ip_conntrack->lan2wan_collision)
++			return 0;
++#ifndef _NOT_CHECK_SIP_DIP	// enable it if know and get the wan ip address
++		if (!sl351x_nat_find_ipcfg(sip, port))
++		{
++			printk("LAN->WAN Incorrect Sip %d.%d.%d.%d\n", HIPQUAD(sip));
++			return 0;
++		}
++#endif
++		// Note: unused fields (including rule_id) MUST be zero
++		hash_entry->key.Ethertype 	= 0;
++		hash_entry->key.port_id 	= cfg->lan_port;
++		hash_entry->key.rule_id 	= 0;
++		hash_entry->key.ip_protocol = proto;
++		hash_entry->key.reserved1 	= 0;
++		hash_entry->key.reserved2 	= 0;
++		hash_entry->key.sip 		= ntohl(nat_cb->sip);
++		hash_entry->key.dip 		= ntohl(nat_cb->dip);
++		hash_entry->key.sport 		= nat_cb->sport;
++		hash_entry->key.dport 		= nat_cb->dport;
++
++		hash_index = nat_build_keys(&hash_entry->key);
++
++#ifdef NAT_DEBUG_LAN_HASH_TIMEOUT
++		if (hash_get_nat_owner_flag(hash_index))
++			return 0;
++#endif
++		if (hash_get_valid_flag(hash_index))
++		{
++			nat_ip_conntrack->lan2wan_collision = 1;
++			nat_collision++;
++#if 0
++			if (proto == IPPROTO_TCP && (tcp_flag_word(tcp_hdr) & (TCP_FLAG_FIN | TCP_FLAG_RST)))
++			{
++				if (memcmp((void *)&hash_entry->key, hash_get_entry(hash_index), sizeof(NAT_KEY_T)) == 0)
++				{
++   					hash_nat_disable_owner(hash_index);
++ 					hash_invalidate_entry(hash_index); // Must last one, else HW Tx fast SW
++ 					// nat_printf("Invalidate nat hash entry %d\n", hash_index);
++ 				}
++			}
++#endif
++			return 0;
++		}
++
++		// write hash entry
++		hash_entry->key.rule_id = cfg->tcp_udp_rule_id;
++		memcpy(hash_entry->param.da, skb->data, 6);
++		memcpy(hash_entry->param.sa, skb->data+6, 6);
++		hash_entry->param.Sip = sip;
++		hash_entry->param.Dip = dip;
++		hash_entry->param.Sport = sport;
++		hash_entry->param.Dport = dport;
++		hash_entry->param.vlan = 0;
++		hash_entry->param.sw_id = 0;
++		hash_entry->param.mtu = 0;
++		// check PPPoE
++		pppoe_hdr = (struct pppoe_hdr *)(ether_hdr + 1);
++		ppp_proto = *(u16 *)&pppoe_hdr->tag[0];
++		if (ether_hdr->h_proto == __constant_htons(ETH_P_PPP_SES)	// 0x8864
++			&& ppp_proto == __constant_htons(PPP_IP) )				// 0x21
++		{
++			hash_entry->action.dword = NAT_PPPOE_LAN2WAN_ACTIONS;
++			hash_entry->param.pppoe = htons(pppoe_hdr->sid);
++		}
++		else
++		{
++			hash_entry->action.dword = NAT_LAN2WAN_ACTIONS;
++			hash_entry->param.pppoe = 0;
++		}
++		hash_entry->action.bits.dest_qid = sl351x_nat_assign_qid(proto, sip, dip, sport, dport);
++		hash_entry->action.bits.dest_qid +=	(cfg->wan_port==0) ? TOE_GMAC0_HW_TXQ0_QID : TOE_GMAC1_HW_TXQ0_QID;
++		hash_entry->tmo.counter = hash_entry->tmo.interval =
++						(proto == IPPROTO_TCP) ? cfg->tcp_tmo_interval : cfg->udp_tmo_interval;
++		nat_write_hash_entry(hash_index, hash_entry);
++		// nat_printf("%lu Validate a LAN hash entry %d\n", jiffies/HZ, hash_index);
++		// hash_dump_entry(hash_index);
++		hash_nat_enable_owner(hash_index);
++		hash_validate_entry(hash_index); // Must last one, else HW Tx fast than SW
++ 		nat_ip_conntrack->lan2wan_hash_index = hash_index + 1;
++ 		nat_ip_conntrack->hw_nat |= 1;
++		return 0;
++	}
++	else // WAN-to-LAN
++	{
++		if (nat_ip_conntrack->wan2lan_hash_index || nat_ip_conntrack->wan2lan_collision)
++			return 0;
++
++		// Note: unused fields (including rule_id) MUST be zero
++		hash_entry->key.Ethertype 	= 0;
++		hash_entry->key.port_id 	= cfg->wan_port;
++		hash_entry->key.rule_id 	= 0;
++		hash_entry->key.ip_protocol = proto;
++		hash_entry->key.reserved1 	= 0;
++		hash_entry->key.reserved2 	= 0;
++		hash_entry->key.sip 		= ntohl(nat_cb->sip);
++		hash_entry->key.dip 		= ntohl(nat_cb->dip);
++		hash_entry->key.sport 		= nat_cb->sport;
++		hash_entry->key.dport 		= nat_cb->dport;
++
++		hash_index = nat_build_keys(&hash_entry->key);
++
++#ifdef NAT_DEBUG_WAN_HASH_TIMEOUT
++		if (hash_get_nat_owner_flag(hash_index))
++			return 0;
++#endif
++		if (hash_get_valid_flag(hash_index))
++		{
++			nat_ip_conntrack->wan2lan_collision = 1;
++			nat_collision++;
++#if 0
++			if (proto == IPPROTO_TCP && (tcp_flag_word(tcp_hdr) & (TCP_FLAG_FIN | TCP_FLAG_RST)))
++			{
++				if (memcmp((void *)&hash_entry->key, hash_get_entry(hash_index), sizeof(NAT_KEY_T)) == 0)
++				{
++   					hash_nat_disable_owner(hash_index);
++ 					hash_invalidate_entry(hash_index); // Must last one, else HW Tx fast SW
++  					// nat_printf("Invalidate nat hash entry %d\n", hash_index);
++				}
++			}
++#endif
++			return 0;
++		}
++
++		// write hash entry
++		hash_entry->key.rule_id = cfg->tcp_udp_rule_id;
++		memcpy(hash_entry->param.da, skb->data, 6);
++		memcpy(hash_entry->param.sa, skb->data+6, 6);
++		hash_entry->param.Sip = sip;
++		hash_entry->param.Dip = dip;
++		hash_entry->param.Sport = sport;
++		hash_entry->param.Dport = dport;
++		hash_entry->param.vlan = 0;
++		hash_entry->param.pppoe = 0;
++		hash_entry->param.sw_id = 0;
++		hash_entry->param.mtu = 0;
++		hash_entry->action.dword = (nat_cb->pppoe_frame) ? NAT_PPPOE_WAN2LAN_ACTIONS : NAT_WAN2LAN_ACTIONS;
++		hash_entry->action.bits.dest_qid = sl351x_nat_assign_qid(proto, sip, dip, sport, dport);
++		hash_entry->action.bits.dest_qid += (cfg->lan_port==0) ? TOE_GMAC0_HW_TXQ0_QID : TOE_GMAC1_HW_TXQ0_QID;;
++		hash_entry->tmo.counter = hash_entry->tmo.interval =
++						(proto == IPPROTO_TCP) ? cfg->tcp_tmo_interval : cfg->udp_tmo_interval;
++		nat_write_hash_entry(hash_index, hash_entry);
++
++		// nat_printf("%lu Validate a WAN hash entry %d\n", jiffies/HZ, hash_index);
++		// hash_dump_entry(hash_index);
++   		hash_nat_enable_owner(hash_index);
++ 		hash_validate_entry(hash_index); // Must last one, else HW Tx fast SW
++ 		nat_ip_conntrack->wan2lan_hash_index = hash_index + 1;
++ 		nat_ip_conntrack->hw_nat |= 2;
++		return 0;
++	}
++	return 0;
++}
++
++/*----------------------------------------------------------------------
++* sl351x_nat_gre_output
++*	Handle NAT GRE output frames
++*----------------------------------------------------------------------*/
++int sl351x_nat_gre_output(struct sk_buff *skb, int port)
++{
++	u32					sip, dip;
++	struct ethhdr		*ether_hdr;
++	struct iphdr		*ip_hdr;
++	struct pppoe_hdr	*pppoe_hdr;
++	GRE_PKTHDR_T		*gre_hdr;
++	NAT_CB_T			*nat_cb;
++	NAT_CFG_T			*cfg;
++	u16					ppp_proto;
++	u32					hash_data[HASH_MAX_DWORDS];
++	GRE_HASH_ENTRY_T	*hash_entry;
++	int					hash_index;
++	struct ip_conntrack *nat_ip_conntrack;
++	enum ip_conntrack_info ctinfo;
++
++	nat_cb = NAT_SKB_CB(skb);
++	cfg = (NAT_CFG_T *)&nat_cfg;
++
++	ether_hdr = (struct ethhdr *)skb->data;
++	ip_hdr = (struct iphdr *)skb->h.ipiph;
++	gre_hdr = (GRE_PKTHDR_T *)((u32)ip_hdr + (ip_hdr->ihl<<2));
++	sip = ntohl(ip_hdr->saddr);
++	dip = ntohl(ip_hdr->daddr);
++
++#ifdef	NAT_DEBUG_MSG
++	{
++		nat_printf("To   GMAC-%d: 0x%-4X GRE %d.%d.%d.%d [%d] --> %d.%d.%d.%d",
++				port, ntohs(ip_hdr->id),
++				NIPQUAD(ip_hdr->saddr), ntohs(gre_hdr->call_id),
++				NIPQUAD(ip_hdr->daddr));
++		nat_printf("\n");
++	}
++#endif
++	nat_ip_conntrack = ip_conntrack_get(skb, &ctinfo);
++	if (nat_ip_conntrack)
++	{
++		// if (nat_ip_conntrack->master || nat_ip_conntrack->helper)
++		if (nat_ip_conntrack->helper)
++		{
++			nat_printf("GRE Call-ID=%d, master=0x%x, helper=0x%x\n", ntohs(gre_hdr->call_id), (u32)nat_ip_conntrack->master, (u32)nat_ip_conntrack->helper);
++			return 0;
++		}
++		if (!(nat_ip_conntrack->status & IPS_ASSURED))
++			return 0;
++	}
++
++	hash_entry = (GRE_HASH_ENTRY_T *)&hash_data;
++	if (port == cfg->wan_port)	// LAN-to-WAN
++	{
++#ifdef _NOT_CHECK_SIP_DIP	// enable it if know and get the wan ip address
++		if (!sl351x_nat_find_ipcfg(sip, port))
++		{
++			printk("LAN->WAN Incorrect Sip %d.%d.%d.%d\n", HIPQUAD(sip));
++			return 0;
++		}
++#endif
++		// Note: unused fields (including rule_id) MUST be zero
++		hash_entry->key.Ethertype 	= 0;
++		hash_entry->key.port_id 	= cfg->lan_port;
++		hash_entry->key.rule_id 	= 0;
++		hash_entry->key.ip_protocol = IPPROTO_GRE;
++		hash_entry->key.reserved1 	= 0;
++		hash_entry->key.reserved2 	= 0;
++		hash_entry->key.reserved3 	= 0;
++		hash_entry->key.reserved4 	= 0;
++		hash_entry->key.sip 		= ntohl(nat_cb->sip);
++		hash_entry->key.dip 		= ntohl(nat_cb->dip);
++		hash_entry->key.protocol	= nat_cb->sport;
++		hash_entry->key.call_id 	= nat_cb->dport;
++
++		hash_index = gre_build_keys(&hash_entry->key);
++
++#ifdef NAT_DEBUG_LAN_HASH_TIMEOUT
++		if (hash_get_nat_owner_flag(hash_index))
++			return 0;
++#endif
++		if (hash_get_valid_flag(hash_index))
++		{
++			return 0;
++		}
++
++		// write hash entry
++		hash_entry->key.rule_id = cfg->gre_rule_id;
++		memcpy(hash_entry->param.da, skb->data, 6);
++		memcpy(hash_entry->param.sa, skb->data+6, 6);
++		hash_entry->param.Sip = sip;
++		hash_entry->param.Dip = dip;
++		hash_entry->param.Sport = 0;
++		hash_entry->param.Dport = ntohs(gre_hdr->call_id);
++		hash_entry->param.vlan = 0;
++		hash_entry->param.sw_id = 0;
++		hash_entry->param.mtu = 0;
++		// check PPPoE
++		pppoe_hdr = (struct pppoe_hdr *)(ether_hdr + 1);
++		ppp_proto = *(u16 *)&pppoe_hdr->tag[0];
++		if (ether_hdr->h_proto == __constant_htons(ETH_P_PPP_SES)	// 0x8864
++			&& ppp_proto == __constant_htons(PPP_IP) )				// 0x21
++		{
++			hash_entry->action.dword = NAT_PPPOE_PPTP_LAN2WAN_ACTIONS;
++			hash_entry->param.pppoe = htons(pppoe_hdr->sid);
++		}
++		else
++		{
++			hash_entry->action.dword = NAT_PPTP_LAN2WAN_ACTIONS;
++			hash_entry->param.pppoe = 0;
++		}
++		hash_entry->action.bits.dest_qid = sl351x_nat_assign_qid(IPPROTO_GRE, sip, dip, 0, ntohs(gre_hdr->call_id));
++		hash_entry->action.bits.dest_qid +=	(cfg->wan_port==0) ? TOE_GMAC0_HW_TXQ0_QID : TOE_GMAC1_HW_TXQ0_QID;
++		hash_entry->tmo.counter = hash_entry->tmo.interval = cfg->gre_tmo_interval;
++		gre_write_hash_entry(hash_index, hash_entry);
++		// nat_printf("%lu Validate a LAN hash entry %d\n", jiffies/HZ, hash_index);
++		// hash_dump_entry(hash_index);
++		hash_nat_enable_owner(hash_index);
++		hash_validate_entry(hash_index); // Must last one, else HW Tx fast than SW
++		return 0;
++	}
++	else // WAN-to-LAN
++	{
++		// Note: unused fields (including rule_id) MUST be zero
++		hash_entry->key.Ethertype 	= 0;
++		hash_entry->key.port_id 	= cfg->wan_port;
++		hash_entry->key.rule_id 	= 0;
++		hash_entry->key.ip_protocol = IPPROTO_GRE;
++		hash_entry->key.reserved1 	= 0;
++		hash_entry->key.reserved2 	= 0;
++		hash_entry->key.reserved3 	= 0;
++		hash_entry->key.reserved4 	= 0;
++		hash_entry->key.sip 		= ntohl(nat_cb->sip);
++		hash_entry->key.dip 		= ntohl(nat_cb->dip);
++		hash_entry->key.protocol	= nat_cb->sport;
++		hash_entry->key.call_id		= nat_cb->dport;
++
++		hash_index = gre_build_keys(&hash_entry->key);
++
++#ifdef NAT_DEBUG_WAN_HASH_TIMEOUT
++		if (hash_get_nat_owner_flag(hash_index))
++			return 0;
++#endif
++		if (hash_get_valid_flag(hash_index))
++		{
++			return 0;
++		}
++
++		// write hash entry
++		hash_entry->key.rule_id = cfg->gre_rule_id;
++		memcpy(hash_entry->param.da, skb->data, 6);
++		memcpy(hash_entry->param.sa, skb->data+6, 6);
++		hash_entry->param.Sip = sip;
++		hash_entry->param.Dip = dip;
++		hash_entry->param.Sport = 0;
++		hash_entry->param.Dport = ntohs(gre_hdr->call_id);
++		hash_entry->param.vlan = 0;
++		hash_entry->param.pppoe = 0;
++		hash_entry->param.sw_id = 0;
++		hash_entry->param.mtu = 0;
++		hash_entry->action.dword = (nat_cb->pppoe_frame) ? NAT_PPPOE_PPTP_WAN2LAN_ACTIONS : NAT_PPTP_WAN2LAN_ACTIONS;
++		hash_entry->action.bits.dest_qid = sl351x_nat_assign_qid(IPPROTO_GRE, sip, dip, 0, ntohs(gre_hdr->call_id));
++		hash_entry->action.bits.dest_qid += (cfg->lan_port==0) ? TOE_GMAC0_HW_TXQ0_QID : TOE_GMAC1_HW_TXQ0_QID;;
++		hash_entry->tmo.counter = hash_entry->tmo.interval = cfg->gre_tmo_interval;
++		gre_write_hash_entry(hash_index, hash_entry);
++
++		// nat_printf("%lu Validate a WAN hash entry %d\n", jiffies/HZ, hash_index);
++		// hash_dump_entry(hash_index);
++   		hash_nat_enable_owner(hash_index);
++ 		hash_validate_entry(hash_index); // Must last one, else HW Tx fast SW
++		return 0;
++	}
++	return 0;
++}
++
++
++#ifdef _HAVE_DYNAMIC_PORT_LIST
++/*----------------------------------------------------------------------
++* sl_nat_add_port
++*----------------------------------------------------------------------*/
++void sl_nat_add_port(u8 protocol, u16 port)
++{
++	int 	i;
++	u16		*port_ptr;
++
++	if (protocol == IPPROTO_TCP)
++		port_ptr = dynamic_tcp_port_list;
++	else if (protocol == IPPROTO_UDP)
++		port_ptr = dynamic_udp_port_list;
++	else
++		return;
++
++	for (i=0; *port_ptr; i++)
++	{
++		if (port == *port_ptr)
++			return;
++		port_ptr++;
++	}
++	port_ptr++;
++	*port_ptr = port;
++}
++
++/*----------------------------------------------------------------------
++* sl_nat_remove_port
++*----------------------------------------------------------------------*/
++void sl_nat_remove_port(u8 protocol, u16 port)
++{
++	int 	i, j;
++	u16		*port_ptr, *next;
++
++	if (protocol == IPPROTO_TCP)
++		port_ptr = dynamic_tcp_port_list;
++	else if (protocol == IPPROTO_UDP)
++		port_ptr = dynamic_udp_port_list;
++	else
++		return;
++
++	for (i=0; *port_ptr; i++, port_ptr++)
++	{
++		if (port == *port_ptr)
++		{
++			port_next = port_ptr + 1;
++			for (j=i+1; *port_next; i++, j++)
++				*port_ptr++ = *port_next++;
++			*port_ptr = 0;
++			return;
++		}
++	}
++}
++#endif
++
++/*----------------------------------------------------------------------
++* sl351x_nat_ioctl
++*----------------------------------------------------------------------*/
++int sl351x_nat_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
++{
++	GMAC_INFO_T 		*tp = (GMAC_INFO_T *)dev->priv;
++	int 				i, j, port_id;
++    NATCMD_HDR_T		nat_hdr;
++    NAT_REQ_E			ctrl;
++	unsigned char		*req_datap;
++	NAT_IP_ENTRY_T		*ipcfg;
++	NAT_XPORT_ENTRY_T	*xport_entry;
++	NAT_WRULE_ENTRY_T	*wrule_entry;
++	unsigned int		qid;
++
++	if (copy_from_user((void *)&nat_hdr, rq->ifr_data, sizeof(nat_hdr)))
++		return -EFAULT;
++	req_datap = (unsigned char *)rq->ifr_data + sizeof(nat_hdr);
++	port_id = tp->port_id;
++	switch (nat_hdr.cmd) {
++	case NATSSTATUS:
++		if (!capable(CAP_NET_ADMIN))
++			return -EPERM;
++		if (nat_hdr.len != sizeof(NAT_STATUS_T))
++			return -EPERM;
++		if (copy_from_user((void *)&ctrl.status, req_datap, sizeof(ctrl.status)))
++			return -EFAULT;
++		if (ctrl.status.enable != 0 && ctrl.status.enable != 1)
++			return -EPERM;
++		// sl351x_nat_set_enabled_flag(ctrl.status.enable);
++		if (nat_cfg.enabled && (ctrl.status.enable == 0))
++		{
++			for (i=0; i= CONFIG_NAT_MAX_IP_NUM)
++			return -E2BIG;
++		if (copy_from_user((void *)&nat_cfg.ipcfg[port_id].entry[i], req_datap, sizeof(NAT_IPCFG_T)))
++			return -EFAULT;
++		nat_cfg.ipcfg[port_id].total++;
++		break;
++	case NATDELIP:
++		if (!capable(CAP_NET_ADMIN))
++			return -EPERM;
++		if (nat_hdr.len != sizeof(NAT_IPCFG_T))
++			return -EPERM;
++		if (copy_from_user((void *)&ctrl.ipcfg, req_datap, sizeof(ctrl.ipcfg)))
++			return -EFAULT;
++		ipcfg = (NAT_IP_ENTRY_T *)&nat_cfg.ipcfg[port_id].entry[0];
++		for (i=0; iipaddr == ctrl.ipcfg.entry.ipaddr)
++			{
++				NAT_IP_ENTRY_T *ipcfg_next;
++				ipcfg_next = ipcfg + 1;
++				for (j=i+1; j < nat_cfg.ipcfg[port_id].total; i++, j++)
++				{
++					memcpy((void *)ipcfg, (void *)ipcfg_next, sizeof(NAT_IP_ENTRY_T));
++					ipcfg++;
++					ipcfg_next++;
++				}
++				ipcfg->ipaddr = 0;
++				ipcfg->netmask = 0;
++				nat_cfg.ipcfg[port_id].total--;
++				return 0;
++			}
++		}
++		return -ENOENT;
++	case NATGETIP:
++		if (nat_hdr.len != sizeof(NAT_IPCFG_ALL_T))
++			return -EPERM;
++		if (copy_to_user(req_datap, (void *)&nat_cfg.ipcfg[port_id], sizeof(NAT_IPCFG_ALL_T)))
++			return -EFAULT;
++		break;
++	case NATAXPORT:
++		if (!capable(CAP_NET_ADMIN))
++			return -EPERM;
++		if (nat_hdr.len != sizeof(NAT_XPORT_T))
++			return -EPERM;
++		i = nat_cfg.xport.total;
++		if (i >= CONFIG_NAT_MAX_XPORT)
++			return -E2BIG;
++		if (copy_from_user((void *)&nat_cfg.xport.entry[i], req_datap, sizeof(NAT_XPORT_T)))
++			return -EFAULT;
++		nat_cfg.xport.total++;
++		break;
++	case NATDXPORT:
++		if (!capable(CAP_NET_ADMIN))
++			return -EPERM;
++		if (nat_hdr.len != sizeof(NAT_XPORT_T))
++			return -EPERM;
++		if (copy_from_user((void *)&ctrl.xport, req_datap, sizeof(NAT_XPORT_T)))
++			return -EFAULT;
++		xport_entry = (NAT_XPORT_ENTRY_T *)&nat_cfg.xport.entry[0];
++		for (i=0; i CONFIG_NAT_TXQ_NUM)
++			return -EPERM;
++		i = nat_cfg.wrule[qid].total;
++		if (i >= CONFIG_NAT_MAX_WRULE)
++			return -E2BIG;
++		if (copy_from_user((void *)&nat_cfg.wrule[qid].entry[i], req_datap+sizeof(qid), sizeof(NAT_WRULE_T)))
++			return -EFAULT;
++		nat_cfg.wrule[qid].total++;
++		break;
++	case NATDWRULE:
++		if (!capable(CAP_NET_ADMIN))
++			return -EPERM;
++		if (nat_hdr.len != sizeof(NAT_WRULE_T))
++			return -EPERM;
++		if (copy_from_user((void *)&ctrl.wrule, req_datap, sizeof(NAT_WRULE_T)))
++			return -EFAULT;
++		qid = ctrl.wrule.qid;
++		if (qid >= CONFIG_NAT_TXQ_NUM)
++			return -EPERM;
++		wrule_entry = (NAT_WRULE_ENTRY_T *)&nat_cfg.wrule[qid].entry[0];
++		for (i=0; i= CONFIG_NAT_TXQ_NUM)
++			return -EPERM;
++		if (copy_to_user(req_datap, (void *)&nat_cfg.wrule[qid], sizeof(NAT_WRULE_ALL_T)))
++			return -EFAULT;
++		break;
++	case NATSDEFQ:
++		if (!capable(CAP_NET_ADMIN))
++			return -EPERM;
++		if (nat_hdr.len != sizeof(NAT_QUEUE_T))
++			return -EPERM;
++		if (copy_from_user((void *)&nat_cfg.default_hw_txq, req_datap, sizeof(u32)))
++			return -EFAULT;
++		break;
++	case NATGDEFQ:
++		if (nat_hdr.len != sizeof(NAT_QUEUE_T))
++			return -EPERM;
++		if (copy_to_user(req_datap, (void *)&nat_cfg.default_hw_txq, sizeof(u32)))
++			return -EFAULT;
++	case NATRMIPCFG:
++		nat_cfg.ipcfg[port_id].total = 0;
++		break;
++	case NATTESTENTRY:
++		if (!capable(CAP_NET_ADMIN))
++			return -EPERM;
++		if (nat_hdr.len != sizeof(NAT_TESTENTRY_T))
++			return -EPERM;
++		if (copy_from_user((void *)&ctrl.init_entry, req_datap, sizeof(ctrl.init_entry)))
++			return -EFAULT;
++		if (ctrl.init_entry.init_enable != 0 && ctrl.init_entry.init_enable != 1)
++			return -EPERM;
++		nat_cfg.init_enabled = ctrl.init_entry.init_enable;
++		break;
++
++	default:
++		return -EPERM;
++	}
++
++	return 0;
++}
++
++/*----------------------------------------------------------------------
++* 	nat_init_test_entry
++*	Initialize NAT test hash entries
++*
++*	SmartBits P1  -----> Lepus GMAC 0 --------------+
++*													|
++*													|
++*             P3  <----- Lepus GMAC 1 -- HW TxQ0 <--+
++*									  -- HW TxQ1 <--+
++*									  -- HW TxQ2 <--+
++*									  -- HW TxQ3 <--+
++*
++*	SmartBits P1  <----- Lepus GMAC 0 -- HW TxQ0 <--+
++*									  -- HW TxQ1 <--+
++*                                     -- HW TxQ2 <--+
++*									  -- HW TxQ3 <--+
++*													|
++*													|
++*             P3  -----> Lepus GMAC 1 --------------+
++*
++*   LAN GMAC0 <--------------------------------------------> GMAC1 WAN
++*	192.168.[x].[y]:50 --> 168.95.[x].[y]:80 ---TXQ[y-1]---> 192.168.2.254:200[y] --> 168.95.[x].[y]:80
++*	192.168.[x].[y]:50 <-- 168.95.[x].[y]:80 <--TXQ[y-1]---- 192.168.2.254:200[y] <-- 168.95.[x].[y]:80
++*   where:
++*		[x] : Packet Type
++*		[y] : Tx Queue, 1 for TxQ0, 2 for TxQ1, 3 for TxQ2, 4 for TxQ3,
++*
++*
++* Packet Type:
++* 1. TCP Frames <---> TCP Frames
++*   LAN GMAC0 <--------------------------------> GMAC1 WAN
++*	192.168.1.1:50 --> 168.95.1.1:80 ---TXQ0---> 192.168.2.254:2001 --> 168.95.1.1:80
++*	192.168.1.1:50 <-- 168.95.1.1:80 <--TXQ0---- 192.168.2.254:2001 <-- 168.95.1.1:80
++*
++*	192.168.1.2:50 --> 168.95.1.2:80 ---TXQ1---> 192.168.2.254:2002 --> 168.95.1.2:80
++*	192.168.1.2:50 <-- 168.95.1.2:80 <--TXQ1---- 192.168.2.254:2002 <-- 168.95.1.2:80
++*
++*	192.168.1.3:50 --> 168.95.1.3:80 ---TXQ2---> 192.168.2.254:2003 --> 168.95.1.3:80
++*	192.168.1.3:50 <-- 168.95.1.3:80 <--TXQ2---- 192.168.2.254:2003 <-- 168.95.1.3:80
++*
++*	192.168.1.4:50 --> 168.95.1.4:80 ---TXQ3---> 192.168.2.254:2004 --> 168.95.1.4:80
++*	192.168.1.4:50 <-- 168.95.1.4:80 <--TXQ3---- 192.168.2.254:2004 <-- 168.95.1.4:80
++*
++* 2 TCP Frames <----> PPPoE + TCP Frames
++*   LAN GMAC0 <--------------------------------> GMAC1 WAN
++*	192.168.2.1:50 --> 168.95.2.1:80 ---TXQ0---> 192.168.2.254:2001 --> 168.95.2.1:80
++*	192.168.2.1:50 <-- 168.95.2.1:80 <--TXQ0---- 192.168.2.254:2001 <-- 168.95.2.1:80
++*
++*	192.168.2.2:50 --> 168.95.2.2:80 ---TXQ1---> 192.168.2.254:2002 --> 168.95.2.2:80
++*	192.168.2.2:50 <-- 168.95.2.2:80 <--TXQ1---- 192.168.2.254:2002 <-- 168.95.2.2:80
++*
++*	192.168.2.3:50 --> 168.95.2.3:80 ---TXQ2---> 192.168.2.254:2003 --> 168.95.2.3:80
++*	192.168.2.3:50 <-- 168.95.2.3:80 <--TXQ2---- 192.168.2.254:2003 <-- 168.95.2.3:80
++*
++*	192.168.2.4:50 --> 168.95.2.4:80 ---TXQ3---> 192.168.2.254:2004 --> 168.95.2.4:80
++*	192.168.2.4:50 <-- 168.95.2.4:80 <--TXQ3---- 192.168.2.254:2004 <-- 168.95.2.4:80
++*
++* 3 TCP Frames <----> VLAN + PPPoE + TCP Frames
++*   LAN GMAC0 <--------------------------------> GMAC1 WAN
++*	192.168.3.1:50 --> 168.95.3.1:80 ---TXQ0---> 192.168.2.254:2001 --> 168.95.3.1:80
++*	192.168.3.1:50 <-- 168.95.3.1:80 <--TXQ0---- 192.168.2.254:2001 <-- 168.95.3.1:80
++*
++*	192.168.3.2:50 --> 168.95.3.2:80 ---TXQ1---> 192.168.2.254:2002 --> 168.95.3.2:80
++*	192.168.3.2:50 <-- 168.95.3.2:80 <--TXQ1---- 192.168.2.254:2002 <-- 168.95.3.2:80
++*
++*	192.168.3.3:50 --> 168.95.3.3:80 ---TXQ2---> 192.168.2.254:2003 --> 168.95.3.3:80
++*	192.168.3.3:50 <-- 168.95.3.3:80 <--TXQ2---- 192.168.2.254:2003 <-- 168.95.3.3:80
++*
++*	192.168.3.4:50 --> 168.95.3.4:80 ---TXQ3---> 192.168.2.254:2004 --> 168.95.3.4:80
++*	192.168.3.4:50 <-- 168.95.3.4:80 <--TXQ3---- 192.168.2.254:2004 <-- 168.95.3.4:80
++*
++* 4 VLAN-A + TCP Frames <----> VLAN-B + PPPoE + TCP Frames
++*   LAN GMAC0 <--------------------------------> GMAC1 WAN
++*	192.168.4.1:50 --> 168.95.4.1:80 ---TXQ0---> 192.168.2.254:2001 --> 168.95.4.1:80
++*	192.168.4.1:50 <-- 168.95.4.1:80 <--TXQ0---- 192.168.2.254:2001 <-- 168.95.4.1:80
++*
++*	192.168.4.2:50 --> 168.95.4.2:80 ---TXQ1---> 192.168.2.254:2002 --> 168.95.4.2:80
++*	192.168.4.2:50 <-- 168.95.4.2:80 <--TXQ1---- 192.168.2.254:2002 <-- 168.95.4.2:80
++*
++*	192.168.4.3:50 --> 168.95.4.3:80 ---TXQ2---> 192.168.2.254:2003 --> 168.95.4.3:80
++*	192.168.4.3:50 <-- 168.95.4.3:80 <--TXQ2---- 192.168.2.254:2003 <-- 168.95.4.3:80
++*
++*	192.168.4.4:50 --> 168.95.4.4:80 ---TXQ3---> 192.168.2.254:2004 --> 168.95.4.4:80
++*	192.168.4.4:50 <-- 168.95.4.4:80 <--TXQ3---- 192.168.2.254:2004 <-- 168.95.4.4:80
++*
++*
++*
++*----------------------------------------------------------------------*/
++#ifdef SL351x_NAT_TEST_BY_SMARTBITS
++#define 	NAT_IPIV(a,b,c,d)			((a<<24)+(b<<16)+(c<<8)+d)
++#define     NAT_TEST_CLIENT_IP 			NAT_IPIV(192,168,1,1)
++#define     NAT_TEST_SERVER_IP 			NAT_IPIV(168,95,1,1)
++#define		NAT_TEST_LAN_IP				NAT_IPIV(192,168,1,254)
++#define		NAT_TEST_WAN_IP				NAT_IPIV(192,168,2,254)
++#define     NAT_TEST_MAP_PORT_BASE		2001
++#define     NAT_TEST_SPORT				50
++#define     NAT_TEST_DPORT				80
++#define     NAT_TEST_PROTOCOL			6
++u8			nat_test_lan_target_da[6]={0x00,0x11,0x22,0x33,0x44,0x55};
++u8			nat_test_wan_target_da[6]={0x00,0xaa,0xbb,0xcc,0xdd,0xee};
++u8			nat_test_lan_my_da[6]={0x00,0x11,0x11,0x11,0x11,0x11};
++u8			nat_test_wan_my_da[6]={0x00,0x22,0x22,0x22,0x22,0x22};
++static void nat_init_test_entry(void)
++{
++	int 				i, j ;
++	NAT_HASH_ENTRY_T	*hash_entry;
++	u32					sip, dip;
++	u32					hash_data[HASH_MAX_DWORDS];
++	NAT_CFG_T			*cfg;
++	int					hash_index;
++
++	cfg = (NAT_CFG_T *)&nat_cfg;
++	hash_entry = (NAT_HASH_ENTRY_T *)&hash_data;
++	hash_entry->key.Ethertype 	= 0;
++	hash_entry->key.rule_id 	= 0;
++	hash_entry->key.ip_protocol = IPPROTO_TCP;
++	hash_entry->key.reserved1 	= 0;
++	hash_entry->key.reserved2 	= 0;
++	// hash_entry->key.sip 		= NAT_TEST_CLIENT_IP;
++	// hash_entry->key.dip 		= NAT_TEST_SERVER_IP;
++	hash_entry->key.sport 		= htons(NAT_TEST_SPORT);
++	hash_entry->key.dport 		= htons(NAT_TEST_DPORT);
++	hash_entry->key.rule_id = cfg->tcp_udp_rule_id;
++	hash_entry->action.dword = NAT_LAN2WAN_ACTIONS;
++
++	sip = NAT_TEST_CLIENT_IP;
++	dip = NAT_TEST_SERVER_IP;
++
++	// Init TCP <------> TCP hash entries
++	// LAN --> WAN
++	// (1) TCP --> TCP
++	// (2) TCP --> PPPoE + TCP
++	// (3) TCP --> VLAN-B + PPPoE + TCP
++	// (4) TCP + VLAN-A --> VLAN-B + PPPoE + TCP
++	memcpy(hash_entry->param.da, nat_test_wan_target_da, 6);
++	memcpy(hash_entry->param.sa, nat_test_wan_my_da, 6);
++	hash_entry->key.port_id = cfg->lan_port;
++	for (i=0; iaction.bits.dest_qid = i+2;
++		}
++		else
++		{
++			hash_entry->action.bits.dest_qid = i;
++		}
++		hash_entry->action.bits.dest_qid += (cfg->wan_port==0) ? TOE_GMAC0_HW_TXQ0_QID : TOE_GMAC1_HW_TXQ0_QID;
++		hash_entry->param.Sport = NAT_TEST_MAP_PORT_BASE+i;
++		hash_entry->param.Dport = NAT_TEST_DPORT;
++		for (j=0; j<4; j++)
++		{
++			hash_entry->key.sip = sip + i + j*0x100;
++			hash_entry->key.dip = dip + i + j*0x100;
++			hash_entry->param.Dip = hash_entry->key.dip;
++			hash_entry->param.Sip = NAT_TEST_WAN_IP;
++			switch (j)
++			{
++			case 0:
++				hash_entry->action.bits.pppoe = 0;
++				hash_entry->param.pppoe = 0;
++				hash_entry->action.bits.vlan = 0;
++				hash_entry->param.vlan = 0;
++				break;
++			case 1:
++				hash_entry->action.bits.pppoe = 1;
++				hash_entry->param.pppoe = i+1;
++				hash_entry->action.bits.vlan = 0;
++				hash_entry->param.vlan = 0;
++				break;
++			case 2:
++				hash_entry->action.bits.pppoe = 1;
++				hash_entry->param.pppoe = i+1;
++				hash_entry->action.bits.vlan = 1;
++				hash_entry->param.vlan = i+10;
++				break;
++			case 3:
++				hash_entry->action.bits.pppoe = 1;
++				hash_entry->param.pppoe = i+1;
++				hash_entry->action.bits.vlan = 1;
++				hash_entry->param.vlan = i+10;
++				break;
++			}
++			hash_entry->tmo.counter = hash_entry->tmo.interval = 0x7fff;
++			hash_index = nat_build_keys(&hash_entry->key);
++			nat_write_hash_entry(hash_index, hash_entry);
++			hash_nat_enable_owner(hash_index);
++			hash_validate_entry(hash_index); // Must last one, else HW Tx fast than SW
++		}
++	}
++
++
++	// WAN --> LAN
++	hash_entry->key.port_id 	= cfg->wan_port;
++	hash_entry->key.sport 		= htons(NAT_TEST_DPORT);
++	hash_entry->key.dport 		= htons(NAT_TEST_DPORT);
++	hash_entry->key.rule_id		= cfg->tcp_udp_rule_id;
++	hash_entry->action.dword	= NAT_WAN2LAN_ACTIONS;
++	hash_entry->key.sport		= htons(NAT_TEST_DPORT);
++	memcpy(hash_entry->param.da, nat_test_lan_target_da, 6);
++	memcpy(hash_entry->param.sa, nat_test_lan_my_da, 6);
++	for (i=0; ikey.dport = htons(NAT_TEST_MAP_PORT_BASE + i);
++		if (i < 2)
++		{
++			hash_entry->action.bits.dest_qid = i+2;
++		}
++		else
++		{
++			hash_entry->action.bits.dest_qid = i;
++		}
++		hash_entry->action.bits.dest_qid += (cfg->lan_port==0) ? TOE_GMAC0_HW_TXQ0_QID : TOE_GMAC1_HW_TXQ0_QID;
++		hash_entry->param.Dport = NAT_TEST_SPORT;
++		hash_entry->param.Sport = NAT_TEST_DPORT;
++		hash_entry->param.da[5] = i;
++		for (j=0; j<4; j++)
++		{
++			hash_entry->key.sip = (dip + i + j*0x100);
++			hash_entry->key.dip = (NAT_TEST_WAN_IP);
++			hash_entry->param.Sip = hash_entry->key.sip;
++			hash_entry->param.Dip = sip + i + j*0x100;
++			switch (j)
++			{
++			case 0:
++				hash_entry->action.bits.pppoe = 0;
++				hash_entry->param.pppoe = 0;
++				hash_entry->action.bits.vlan = 0;
++				hash_entry->param.vlan = 0;
++				break;
++			case 1:
++				hash_entry->action.bits.pppoe = 2;
++				hash_entry->param.pppoe = i+1;
++				hash_entry->action.bits.vlan = 0;
++				hash_entry->param.vlan = 0;
++				break;
++			case 2:
++				hash_entry->action.bits.pppoe = 2;
++				hash_entry->param.pppoe = i+1;
++				hash_entry->action.bits.vlan = 2;
++				hash_entry->param.vlan = i+5;
++				break;
++			case 3:
++				hash_entry->action.bits.pppoe = 1;
++				hash_entry->param.pppoe = i+1;
++				hash_entry->action.bits.vlan = 1;
++				hash_entry->param.vlan = i+5;
++				break;
++			}
++			hash_entry->tmo.counter = hash_entry->tmo.interval = 0x7fff;
++			hash_index = nat_build_keys(&hash_entry->key);
++			nat_write_hash_entry(hash_index, hash_entry);
++			hash_nat_enable_owner(hash_index);
++			hash_validate_entry(hash_index); // Must last one, else HW Tx fast than SW
++		}
++	}
++}
++#endif	// SL351x_NAT_TEST_BY_SMARTBITS
++
++#endif // CONFIG_SL351x_NAT
++
+--- /dev/null
++++ b/drivers/net/sl351x_proc.c
+@@ -0,0 +1,578 @@
++/****************************************************************************
++* Copyright 2006 Storlink Corp.  All rights reserved.
++*----------------------------------------------------------------------------
++* Name			: sl351x_proc.c
++* Description	:
++*		Handle Proc Routines for Storlink SL351x Platform
++*
++* History
++*
++*	Date		Writer		Description
++*----------------------------------------------------------------------------
++*	04/13/2006	Gary Chen	Create and implement
++*
++*
++****************************************************************************/
++#include 
++#include 
++#include 
++#include 
++#include 
++#include 
++#include 
++#include 
++#include 
++#include 
++#include 
++#include 
++#include 
++#include 
++#include 
++#include 
++#include 
++#include 
++#include 
++#include 
++#include 
++#include 
++#include 
++#include 
++#include 
++#include 
++#include 
++#ifdef CONFIG_NETFILTER
++// #include 
++#endif
++#include 
++#include 
++#include 
++#ifdef CONFIG_SYSCTL
++#include 
++#endif
++
++#define	 MIDWAY
++#define	 SL_LEPUS
++
++// #define PROC_DEBUG_MSG	1
++
++#include 
++#include 
++#include 
++#include 
++#include 
++
++#ifdef CONFIG_PROC_FS
++/*----------------------------------------------------------------------
++* Definition
++*----------------------------------------------------------------------*/
++#define	proc_printf					printk
++#define SL351x_GMAC_PROC_NAME		"sl351x_gmac"
++#define SL351x_NAT_PROC_NAME		"sl351x_nat"
++#define SL351x_TOE_PROC_NAME		"sl351x_toe"
++
++/*----------------------------------------------------------------------
++* Function Definition
++*----------------------------------------------------------------------*/
++#ifdef CONFIG_SL351x_NAT
++static int nat_ct_open(struct inode *inode, struct file *file);
++static void *nat_ct_seq_start(struct seq_file *s, loff_t *pos);
++static void nat_ct_seq_stop(struct seq_file *s, void *v);
++static void *nat_ct_seq_next(struct seq_file *s, void *v, loff_t *pos);
++static int nat_ct_seq_show(struct seq_file *s, void *v);
++#endif
++
++#ifdef CONFIG_SL351x_RXTOE
++static int toe_ct_open(struct inode *inode, struct file *file);
++static void *toe_ct_seq_start(struct seq_file *s, loff_t *pos);
++static void toe_ct_seq_stop(struct seq_file *s, void *v);
++static void *toe_ct_seq_next(struct seq_file *s, void *v, loff_t *pos);
++static int toe_ct_seq_show(struct seq_file *s, void *v);
++extern int sl351x_get_toe_conn_flag(int index);
++extern struct toe_conn * sl351x_get_toe_conn_info(int index);
++#endif
++
++static int gmac_ct_open(struct inode *inode, struct file *file);
++static void *gmac_ct_seq_start(struct seq_file *s, loff_t *pos);
++static void gmac_ct_seq_stop(struct seq_file *s, void *v);
++static void *gmac_ct_seq_next(struct seq_file *s, void *v, loff_t *pos);
++static int gmac_ct_seq_show(struct seq_file *s, void *v);
++
++
++/*----------------------------------------------------------------------
++* Data
++*----------------------------------------------------------------------*/
++#ifdef CONFIG_SYSCTL
++// static struct ctl_table_header *nat_ct_sysctl_header;
++#endif
++
++#ifdef CONFIG_SL351x_NAT
++static struct seq_operations nat_ct_seq_ops = {
++	.start = nat_ct_seq_start,
++	.next  = nat_ct_seq_next,
++	.stop  = nat_ct_seq_stop,
++	.show  = nat_ct_seq_show
++};
++
++static struct file_operations nat_file_ops= {
++	.owner   = THIS_MODULE,
++	.open    = nat_ct_open,
++	.read    = seq_read,
++	.llseek  = seq_lseek,
++	.release = seq_release
++};
++#endif // CONFIG_SL351x_NAT
++
++#ifdef CONFIG_SL351x_RXTOE
++static struct seq_operations toe_ct_seq_ops = {
++	.start = toe_ct_seq_start,
++	.next  = toe_ct_seq_next,
++	.stop  = toe_ct_seq_stop,
++	.show  = toe_ct_seq_show
++};
++
++static struct file_operations toe_file_ops= {
++	.owner   = THIS_MODULE,
++	.open    = toe_ct_open,
++	.read    = seq_read,
++	.llseek  = seq_lseek,
++	.release = seq_release
++};
++#endif
++
++static struct seq_operations gmac_ct_seq_ops = {
++	.start = gmac_ct_seq_start,
++	.next  = gmac_ct_seq_next,
++	.stop  = gmac_ct_seq_stop,
++	.show  = gmac_ct_seq_show
++};
++
++static struct file_operations gmac_file_ops= {
++	.owner   = THIS_MODULE,
++	.open    = gmac_ct_open,
++	.read    = seq_read,
++	.llseek  = seq_lseek,
++	.release = seq_release
++};
++
++#ifdef SL351x_GMAC_WORKAROUND
++extern u32 gmac_workaround_cnt[4];
++extern u32 gmac_short_frame_workaround_cnt[2];
++#ifdef CONFIG_SL351x_NAT
++	extern u32 sl351x_nat_workaround_cnt;
++#endif
++#endif
++/*----------------------------------------------------------------------
++* nat_ct_open
++*----------------------------------------------------------------------*/
++#ifdef CONFIG_SL351x_NAT
++static int nat_ct_open(struct inode *inode, struct file *file)
++{
++	return seq_open(file, &nat_ct_seq_ops);
++}
++#endif // CONFIG_SL351x_NAT
++/*----------------------------------------------------------------------
++* nat_ct_seq_start
++* find the first
++*----------------------------------------------------------------------*/
++#ifdef CONFIG_SL351x_NAT
++static void *nat_ct_seq_start(struct seq_file *s, loff_t *pos)
++{
++	int i;
++
++	// proc_printf("%s: *pos=%d\n", __func__, (int)*pos);
++	for (i=*pos; iHASH_TOTAL_ENTRIES)
++		return -ENOSPC;
++
++	idx--;
++	nat_entry = (NAT_HASH_ENTRY_T *)&hash_tables[idx];
++	gre_entry = (GRE_HASH_ENTRY_T *)nat_entry;
++	if (nat_entry->key.ip_protocol == IPPROTO_GRE)
++	{
++		if (seq_printf(s, "%4d: KEY MAC-%d [%d] %u.%u.%u.%u [%u]-->%u.%u.%u.%u\n",
++					idx, gre_entry->key.port_id, gre_entry->key.ip_protocol,
++					HIPQUAD(gre_entry->key.sip), ntohs(gre_entry->key.call_id),
++					HIPQUAD(gre_entry->key.dip)))
++			return -ENOSPC;
++		if (seq_printf(s, "      PARAMETER: %u.%u.%u.%u -->%u.%u.%u.%u [%u] Timeout:%ds\n",
++					HIPQUAD(gre_entry->param.Sip),
++					HIPQUAD(gre_entry->param.Dip), gre_entry->param.Dport,
++					gre_entry->tmo.counter))
++			return -ENOSPC;
++	}
++	else
++	{
++		if (seq_printf(s, "%4d: KEY MAC-%d [%d] %u.%u.%u.%u [%u]-->%u.%u.%u.%u [%u]\n",
++					idx, nat_entry->key.port_id, nat_entry->key.ip_protocol,
++					HIPQUAD(nat_entry->key.sip), ntohs(nat_entry->key.sport),
++					HIPQUAD(nat_entry->key.dip), ntohs(nat_entry->key.dport)))
++			return -ENOSPC;
++		if (seq_printf(s, "      PARAMETER: %u.%u.%u.%u [%u]-->%u.%u.%u.%u [%u] Timeout:%ds\n",
++					HIPQUAD(nat_entry->param.Sip), nat_entry->param.Sport,
++					HIPQUAD(nat_entry->param.Dip), nat_entry->param.Dport,
++					nat_entry->tmo.counter))
++			return -ENOSPC;
++	}
++	return 0;
++}
++#endif // CONFIG_SL351x_NAT
++
++/*----------------------------------------------------------------------
++* toe_ct_open
++*----------------------------------------------------------------------*/
++#ifdef CONFIG_SL351x_RXTOE
++static int toe_ct_open(struct inode *inode, struct file *file)
++{
++	return seq_open(file, &toe_ct_seq_ops);
++}
++#endif
++/*----------------------------------------------------------------------
++* toe_ct_seq_start
++* find the first
++*----------------------------------------------------------------------*/
++#ifdef CONFIG_SL351x_RXTOE
++static void *toe_ct_seq_start(struct seq_file *s, loff_t *pos)
++{
++	int i;
++
++	// proc_printf("%s: *pos=%d\n", __func__, (int)*pos);
++	for (i=*pos; iTOE_TOE_QUEUE_NUM)
++		return -ENOSPC;
++
++	idx--;
++	toe_entry = (struct toe_conn *)sl351x_get_toe_conn_info(idx);
++	if (!toe_entry)
++		return -ENOSPC;
++
++	if (seq_printf(s, "%4d: Qid %d MAC-%d TCP %u.%u.%u.%u [%u]-->%u.%u.%u.%u [%u]\n",
++				idx, toe_entry->qid, toe_entry->gmac->port_id,
++				NIPQUAD(toe_entry->saddr[0]), ntohs(toe_entry->source),
++				NIPQUAD(toe_entry->daddr[0]), ntohs(toe_entry->dest)))
++			return -ENOSPC;
++	return 0;
++}
++#endif
++/*----------------------------------------------------------------------
++* gmac_ct_open
++*----------------------------------------------------------------------*/
++static int gmac_ct_open(struct inode *inode, struct file *file)
++{
++	return seq_open(file, &gmac_ct_seq_ops);
++}
++
++/*----------------------------------------------------------------------
++* gmac_ct_seq_start
++* find the first
++*----------------------------------------------------------------------*/
++static void *gmac_ct_seq_start(struct seq_file *s, loff_t *pos)
++{
++	int i;
++	i = (int)*pos + 1;;
++
++	if (i > 9)
++		return NULL;
++	else
++		return (void *)i;
++}
++
++/*----------------------------------------------------------------------
++* gmac_ct_seq_stop
++*----------------------------------------------------------------------*/
++static void gmac_ct_seq_stop(struct seq_file *s, void *v)
++{
++}
++
++/*----------------------------------------------------------------------
++* gmac_ct_seq_next
++*----------------------------------------------------------------------*/
++static void *gmac_ct_seq_next(struct seq_file *s, void *v, loff_t *pos)
++{
++	int i;
++
++	// proc_printf("%s: *pos=%d\n", __func__, (int)*pos);
++
++	(*pos)++;
++	i = (int)*pos + 1;;
++
++	if (i > 9)
++		return NULL;
++	else
++		return (void *)i;
++}
++
++/*----------------------------------------------------------------------
++* seq_dm_long
++*----------------------------------------------------------------------*/
++static void seq_dm_long(struct seq_file *s, u32 location, int length)
++{
++	u32		*start_p, *curr_p, *end_p;
++	u32		*datap, data;
++	int		i;
++
++	//if (length > 1024)
++	//	length = 1024;
++
++	start_p = (u32 *)location;
++	end_p = (u32 *)location + length;
++	curr_p = (u32 *)((u32)location & 0xfffffff0);
++	datap = (u32 *)location;
++	while (curr_p < end_p)
++	{
++		cond_resched();
++		seq_printf(s, "0x%08x: ",(u32)curr_p & 0xfffffff0);
++		for (i=0; i<4; i++)
++		{
++			if (curr_p < start_p || curr_p >= end_p)
++               seq_printf(s, "         ");
++			else
++			{
++				data = *datap;
++				seq_printf(s, "%08X ", data);
++			}
++			if (i==1)
++              seq_printf(s, "- ");
++
++			curr_p++;
++			datap++;
++		}
++        seq_printf(s, "\n");
++	}
++}
++
++/*----------------------------------------------------------------------
++* gmac_ct_seq_show
++*----------------------------------------------------------------------*/
++static int gmac_ct_seq_show(struct seq_file *s, void *v)
++{
++	switch ((int)v)
++	{
++		case 1:
++			seq_printf(s, "\nGMAC Global Registers\n");
++			seq_dm_long(s, TOE_GLOBAL_BASE, 32);
++			break;
++		case 2:
++			seq_printf(s, "\nGMAC Non-TOE Queue Header\n");
++			seq_dm_long(s, TOE_NONTOE_QUE_HDR_BASE, 12);
++			break;
++		case 3:
++			seq_printf(s, "\nGMAC TOE Queue Header\n");
++			seq_dm_long(s, TOE_TOE_QUE_HDR_BASE, 12);
++			break;
++		case 4:
++			seq_printf(s, "\nGMAC-0 DMA Registers\n");
++			seq_dm_long(s, TOE_GMAC0_DMA_BASE, 52);
++			break;
++		case 5:
++			seq_printf(s, "\nGMAC-0 Registers\n");
++			seq_dm_long(s, TOE_GMAC0_BASE, 32);
++			break;
++		case 6:
++			seq_printf(s, "\nGMAC-1 DMA Registers\n");
++			seq_dm_long(s, TOE_GMAC1_DMA_BASE, 52);
++			break;
++		case 7:
++			seq_printf(s, "\nGMAC-1 Registers\n");
++			seq_dm_long(s, TOE_GMAC1_BASE, 32);
++			break;
++		case 8:
++			seq_printf(s, "\nGLOBAL Registers\n");
++			seq_dm_long(s, GMAC_GLOBAL_BASE_ADDR, 16);
++			break;
++		case 9:
++#ifdef SL351x_GMAC_WORKAROUND
++			seq_printf(s, "\nGMAC-0 Rx/Tx/Short Workaround: %u, %u, %u\n", gmac_workaround_cnt[0], gmac_workaround_cnt[1], gmac_short_frame_workaround_cnt[0]);
++			seq_printf(s, "GMAC-1 Rx/Tx/Short Workaround: %u, %u, %u\n", gmac_workaround_cnt[2], gmac_workaround_cnt[3], gmac_short_frame_workaround_cnt[1]);
++#ifdef CONFIG_SL351x_NAT
++			seq_printf(s, "NAT Workaround: %u\n", sl351x_nat_workaround_cnt);
++#endif
++#endif
++			break;
++		default:
++			return -ENOSPC;
++	}
++	return 0;
++}
++
++/*----------------------------------------------------------------------
++* init
++*----------------------------------------------------------------------*/
++static int __init init(void)
++{
++	struct proc_dir_entry *proc_gmac=NULL;
++
++#ifdef CONFIG_SL351x_NAT
++	struct proc_dir_entry *proc_nat=NULL;
++#endif
++
++#ifdef CONFIG_SL351x_RXTOE
++	struct proc_dir_entry *proc_toe=NULL;
++#endif
++
++#ifdef CONFIG_SYSCTL
++	// nat_ct_sysctl_header = NULL;
++#endif
++	proc_gmac = proc_net_fops_create(SL351x_GMAC_PROC_NAME, 0440, &gmac_file_ops);
++	if (!proc_gmac) goto init_bad;
++
++#ifdef CONFIG_SL351x_NAT
++	proc_nat = proc_net_fops_create(SL351x_NAT_PROC_NAME, 0440, &nat_file_ops);
++	if (!proc_nat) goto init_bad;
++#endif // CONFIG_SL351x_NAT
++
++#ifdef CONFIG_SL351x_RXTOE
++	proc_toe = proc_net_fops_create(SL351x_TOE_PROC_NAME, 0440, &toe_file_ops);
++	if (!proc_toe) goto init_bad;
++#endif
++
++#ifdef CONFIG_SYSCTL
++	// nat_ct_sysctl_header = register_sysctl_table(nat_ct_net_table, 0);
++	// if (!nat_ct_sysctl_header) goto init_bad;
++#endif
++
++	return 0;
++
++init_bad:
++	if (proc_gmac) proc_net_remove(SL351x_GMAC_PROC_NAME);
++
++#ifdef CONFIG_SL351x_NAT
++	if (proc_nat) proc_net_remove(SL351x_NAT_PROC_NAME);
++#endif
++
++#ifdef CONFIG_SL351x_RXTOE
++	if (proc_toe) proc_net_remove(SL351x_NAT_PROC_NAME);
++#endif
++
++#ifdef CONFIG_SYSCTL
++	// if (nat_ct_sysctl_header) unregister_sysctl_table(nat_ct_sysctl_header);
++#endif
++	proc_printf("SL351x NAT Proc: can't create proc or register sysctl.\n");
++	return -ENOMEM;
++}
++
++/*----------------------------------------------------------------------
++* fini
++*----------------------------------------------------------------------*/
++static void __exit fini(void)
++{
++	proc_net_remove(SL351x_GMAC_PROC_NAME);
++
++#ifdef CONFIG_SL351x_NAT
++	proc_net_remove(SL351x_NAT_PROC_NAME);
++#endif
++
++#ifdef CONFIG_SL351x_RXTOE
++	proc_net_remove(SL351x_TOE_PROC_NAME);
++#endif
++
++#ifdef CONFIG_SYSCTL
++	// unregister_sysctl_table(nat_ct_sysctl_header);
++#endif
++}
++
++/*----------------------------------------------------------------------
++* module
++*----------------------------------------------------------------------*/
++module_init(init);
++module_exit(fini);
++
++#endif	// CONFIG_PROC_FS
+--- /dev/null
++++ b/drivers/net/sl351x_toe.c
+@@ -0,0 +1,1083 @@
++/**************************************************************************
++* Copyright 2006 StorLink Semiconductors, Inc.  All rights reserved.
++*--------------------------------------------------------------------------
++* Name			: sl351x_toe.c
++* Description	:
++*		Provide TOE routines for SL351x
++*
++* History
++*
++*	Date		Writer		Description
++*----------------------------------------------------------------------------
++*				Xiaochong
++*
++****************************************************************************/
++
++#include 
++#include 
++#include 
++#include 
++#include 
++#include 
++#include 
++#include 
++#include 
++#include 
++#include 
++#include 
++#include 
++#include 
++
++static int in_toe_isr;
++static int toe_initialized=0;
++
++static struct toe_conn	toe_connections[TOE_TOE_QUEUE_NUM];
++EXPORT_SYMBOL(toe_connections);
++static __u32 toe_connection_bits[TOE_TOE_QUEUE_NUM/32] __attribute__ ((aligned(16)));
++struct sk_buff* gen_pure_ack(struct toe_conn* connection, TOE_QHDR_T* toe_qhdr, INTR_QHDR_T *intr_curr_desc);
++
++extern struct storlink_sysctl	storlink_ctl;
++extern TOE_INFO_T toe_private_data;
++extern spinlock_t gmac_fq_lock;
++extern void mac_write_dma_reg(int mac, unsigned int offset, u32 data);
++extern int mac_set_rule_reg(int mac, int rule, int enabled, u32 reg0, u32 reg1, u32 reg2);
++extern int hash_add_toe_entry(HASH_ENTRY_T *entry);
++extern void toe_gmac_fill_free_q(void);
++
++#define _DEBUG_SKB_		1
++#ifdef _DEBUG_SKB_
++/*---------------------------------------------------------------------------
++ * _debug_skb
++ *-------------------------------------------------------------------------*/
++static inline void _debug_skb(struct sk_buff *skb, GMAC_RXDESC_T *toe_curr_desc, u32 data)
++{
++	if ((u32)skb < 0x1000)
++	{
++		printk("%s skb=%x\n", __func__, (u32)skb);
++		while(1);
++	}
++	REG32(__va(toe_curr_desc->word2.buf_adr)-SKB_RESERVE_BYTES) = data;
++}
++#else
++#define _debug_skb(x, y, z)
++#endif
++
++/*---------------------------------------------------------------------------
++ * get_connection_seq_num
++ *-------------------------------------------------------------------------*/
++u32 get_connection_seq_num(unsigned short qid)
++{
++	TOE_QHDR_T	*toe_qhdr;
++
++	toe_qhdr = (TOE_QHDR_T*)TOE_TOE_QUE_HDR_BASE;
++	toe_qhdr += qid;
++	return (u32)toe_qhdr->word3.seq_num;
++}
++EXPORT_SYMBOL(get_connection_seq_num);
++
++/*---------------------------------------------------------------------------
++ * get_connection_ack_num
++ *-------------------------------------------------------------------------*/
++u32 get_connection_ack_num(unsigned short qid)
++{
++	TOE_QHDR_T	*toe_qhdr;
++
++	toe_qhdr = (TOE_QHDR_T*)TOE_TOE_QUE_HDR_BASE;
++	toe_qhdr += qid;
++	return (u32)toe_qhdr->word4.ack_num;
++}
++EXPORT_SYMBOL(get_connection_ack_num);
++
++/*---------------------------------------------------------------------------
++ * dump_toe_qhdr
++ *-------------------------------------------------------------------------*/
++void dump_toe_qhdr(TOE_QHDR_T *toe_qhdr)
++{
++	printk("TOE w1 %x, w2 %x, w3 %x\n", toe_qhdr->word1.bits32,
++		toe_qhdr->word2.bits32, toe_qhdr->word3.bits32);
++	printk("w4 %x, w5 %x, w6 %x\n", toe_qhdr->word4.bits32,
++		toe_qhdr->word5.bits32, toe_qhdr->word6.bits32);
++}
++
++/*---------------------------------------------------------------------------
++ * dump_intrq_desc
++ *-------------------------------------------------------------------------*/
++void dump_intrq_desc(INTR_QHDR_T *intr_curr_desc)
++{
++	printk("INTR w0 %x, w1 %x, seq %x\n", intr_curr_desc->word0.bits32,
++		intr_curr_desc->word1.bits32, intr_curr_desc->word2.bits32);
++	printk("ack %x, w4 %x\n", intr_curr_desc->word3.bits32,
++		intr_curr_desc->word4.bits32);
++}
++
++/*---------------------------------------------------------------------------
++ * This routine will initialize a TOE matching rule
++ * called by SL351x GMAC driver.
++ *-------------------------------------------------------------------------*/
++void sl351x_toe_init(void)
++{
++	GMAC_MRxCR0_T	mrxcr0;
++	GMAC_MRxCR1_T	mrxcr1;
++	GMAC_MRxCR2_T	mrxcr2;
++	int	rule, rc;
++
++	if (toe_initialized)
++		return;
++
++	toe_initialized = 1;
++
++#ifndef CONFIG_SL351x_NAT
++	mrxcr0.bits32 = 0;
++	mrxcr1.bits32 = 0;
++	mrxcr2.bits32 = 0;
++	mrxcr0.bits.l3 = 1;
++	mrxcr0.bits.l4 = 1;
++	mrxcr1.bits.sip = 1;
++	mrxcr1.bits.dip = 1;
++	mrxcr1.bits.l4_byte0_15 = 0x0f;
++	mrxcr0.bits.sprx = 1;
++	rule = 0;
++	rc = mac_set_rule_reg(0, rule, 1, mrxcr0.bits32, mrxcr1.bits32,
++						mrxcr2.bits32);
++	if (rc<0) {
++		printk("%s::Set MAC 0 rule fail!\n", __func__);
++	}
++	rc = mac_set_rule_reg(1, rule, 1, mrxcr0.bits32, mrxcr1.bits32,
++	     					mrxcr2.bits32);
++	if (rc<0) {
++		printk("%s::Set MAC 1 rule fail!\n", __func__);
++	}
++#endif // CONFIG_SL351x_NAT
++}
++
++/*---------------------------------------------------------------------------
++ * dump_intrq_desc
++ * assign an interrupt queue number to a give tcp queue
++ *-------------------------------------------------------------------------*/
++int get_interrupt_queue_id(int tcp_qid)
++{
++	return (int)(tcp_qid & 0x0003);
++}
++
++/*---------------------------------------------------------------------------
++ * reset_connection_index
++ * reset the connection bit by given index
++ *-------------------------------------------------------------------------*/
++void reset_connection_index(__u8 index)
++{
++	__u32 mask = ~(0xffffffff & (1<< (index&0x1f)));
++	toe_connection_bits[index>>5] = toe_connection_bits[index>>5] & mask;
++}
++
++/*---------------------------------------------------------------------------
++ * update_timer
++ *-------------------------------------------------------------------------*/
++void update_timer(struct toe_conn* connection)
++{
++//	if (time_before(jiffies, connection->last_rx_jiffies+3))
++//	if ((jiffies + 0xffffffff - connection->last_rx_jiffies) & 0x3)
++//	if (connection->last_rx_jiffies > jiffies)
++//		printk("%s::jif %g, last_rx_jif %g\n", __func__, jiffies, connection->last_rx_jiffies);
++/*	if ((long)(jiffies + 2)< 3) { // overflow...
++		printk("%s::jiffies %x\n", __func__, jiffies);
++	} */
++//	if ((long)(jiffies - connection->last_rx_jiffies)< 2)
++//		return;
++	connection->last_rx_jiffies = jiffies;
++	// gary chen mod_timer(&connection->rx_timer, jiffies+2);
++	connection->rx_timer.expires = jiffies + 2;
++	add_timer(&connection->rx_timer);
++//	printk("%s::nt %x, lj %x\n", __func__, (jiffies+2), connection->last_rx_jiffies);
++}
++
++/*---------------------------------------------------------------------------
++ * gen_pure_ack
++ *-------------------------------------------------------------------------*/
++struct sk_buff* gen_pure_ack(struct toe_conn* connection, TOE_QHDR_T* toe_qhdr,
++INTR_QHDR_T *intr_curr_desc)
++{
++	struct sk_buff	*skb;
++	struct iphdr	*ip_hdr;
++	struct tcphdr	*tcp_hdr;
++	struct ethhdr	*eth_hdr;
++
++	if ((skb= dev_alloc_skb(RX_BUF_SIZE))==NULL) {
++		printk("%s::alloc pure ack fail!\n", __func__);
++		return NULL;
++	}
++	skb_reserve(skb, RX_INSERT_BYTES);
++	memset(skb->data, 0, 60);
++
++	eth_hdr = (struct ethhdr*)&(skb->data[0]);
++	memcpy(eth_hdr, &connection->l2_hdr, sizeof(struct ethhdr));
++
++	ip_hdr = (struct iphdr*)&(skb->data[14]);
++	ip_hdr->version = connection->ip_ver;
++	ip_hdr->ihl = 20>>2;
++	ip_hdr->tot_len = ntohs(40);
++	ip_hdr->frag_off = htons(IP_DF);
++	ip_hdr->ttl = 128;
++	ip_hdr->protocol = 0x06;
++	ip_hdr->saddr = connection->saddr[0];
++	ip_hdr->daddr = connection->daddr[0];
++//	printk("%s ip sa %x, da %x\n",
++//		__func__, ntohl(ip_hdr->saddr), ntohl(ip_hdr->daddr));
++
++	tcp_hdr = (struct tcphdr*)&(skb->data[34]);
++	tcp_hdr->source = connection->source;
++	tcp_hdr->dest = connection->dest;
++	if (intr_curr_desc) {
++		tcp_hdr->seq = htonl(intr_curr_desc->word2.seq_num);
++		tcp_hdr->ack_seq = htonl(intr_curr_desc->word3.ack_num);
++		tcp_hdr->window = htons(intr_curr_desc->word0.bits.win_size);
++	} else {
++		tcp_hdr->seq = htonl(toe_qhdr->word3.seq_num);
++		tcp_hdr->ack_seq = htonl(toe_qhdr->word4.ack_num);
++		tcp_hdr->window = htons(toe_qhdr->word6.bits.WinSize);
++	}
++	tcp_hdr->ack = 1;
++	tcp_hdr->doff = 20 >> 2;
++#if 0
++	if (!intr_curr_desc) {
++		unsigned char byte;
++		for (i=0; i<20; i++) {
++			byte = skb->data[34+i];
++			printk("%x ", byte);
++		}
++		printk("\n");
++	}
++#endif
++	TCP_SKB_CB(skb)->connection = connection;
++	return skb;
++}
++
++/*---------------------------------------------------------------------------
++ * connection_rx_timer
++ *-------------------------------------------------------------------------*/
++void connection_rx_timer(unsigned long *data)
++{
++	struct toe_conn	*connection = (struct toe_conn*)data;
++	unsigned int	tcp_qid, toeq_wptr;
++	unsigned int	pkt_size, desc_count;
++	struct sk_buff	*skb;
++	GMAC_RXDESC_T	*toe_curr_desc;
++	TOE_QHDR_T	*toe_qhdr;
++	struct net_device	*dev;
++	unsigned long	conn_flags;
++	DMA_RWPTR_T		toeq_rwptr;
++	unsigned short	timeout_descs;
++
++	if (in_toe_isr)
++		printk("%s::in_toe_isr=%d!\n", __func__, in_toe_isr);
++
++	if (connection) {
++		/* should we disable gmac interrupt first? */
++		if (!connection->gmac)
++			printk("%s::conn gmac %x!\n", __func__, (u32)connection->gmac);
++		local_irq_save(conn_flags);
++		if (!spin_trylock(&connection->conn_lock)) {
++			local_irq_restore(conn_flags);
++			// timer should be updated by the toeq isr. So no need to update here.
++			printk("%s::conn_lock is held by ISR!\n", __func__);
++			return;
++		}
++		disable_irq(connection->gmac->irq);
++
++		/* disable hash entry and get toeq desc. */
++		hash_set_valid_flag(connection->hash_entry_index, 0);
++		do{} while(0);	/* wait until HW finish */
++
++		dev = connection->dev;
++		if (!dev)
++			printk("%s::conn dev NULL!\n", __func__);
++		tcp_qid = connection->qid;
++		toe_qhdr = (TOE_QHDR_T *)(TOE_TOE_QUE_HDR_BASE +
++		              tcp_qid * sizeof(TOE_QHDR_T));
++		toeq_rwptr.bits32 = readl(&toe_qhdr->word1);
++		toeq_wptr = toe_qhdr->word1.bits.wptr;
++		timeout_descs = toeq_wptr - toeq_rwptr.bits.rptr;
++
++		if (toeq_rwptr.bits.rptr == toeq_wptr) {
++			if (toe_qhdr->word5.bits32) {
++				// shall we check toe_qhdr->word2.bits?
++				skb = gen_pure_ack(connection, toe_qhdr, (INTR_QHDR_T *)NULL);
++				skb_put(skb, 54);
++				skb->dev = connection->dev;
++				skb->ip_summed = CHECKSUM_UNNECESSARY;
++				skb->protocol = eth_type_trans(skb, connection->dev);
++				netif_rx(skb);
++				connection->dev->last_rx = jiffies;
++			}
++		} else {
++			while (toeq_rwptr.bits.rptr != toeq_rwptr.bits.wptr) {
++				/* we just simply send those packets to tcp? */
++				toe_curr_desc = (GMAC_RXDESC_T*)(toe_private_data.toe_desc_base[tcp_qid]
++					+ toeq_rwptr.bits.rptr * sizeof(GMAC_RXDESC_T));
++				connection->curr_desc = toe_curr_desc;
++				if (toe_curr_desc->word3.bits.ctrl_flag) {
++					printk("%s::ctrl flag! %x, conn rptr %d, to %d, jif %x, conn_jif %x\n",
++						__func__, toe_curr_desc->word3.bits32,
++						connection->toeq_rwptr.bits.rptr, timeout_descs,
++						(u32)jiffies, (u32)connection->last_rx_jiffies);
++				}
++				desc_count = toe_curr_desc->word0.bits.desc_count;
++				pkt_size = toe_curr_desc->word1.bits.byte_count;
++				consistent_sync((void*)__va(toe_curr_desc->word2.buf_adr), pkt_size,
++					PCI_DMA_FROMDEVICE);
++				skb = (struct sk_buff*)(REG32(__va(toe_curr_desc->word2.buf_adr)-
++					SKB_RESERVE_BYTES));
++				_debug_skb(skb, (GMAC_RXDESC_T *)toe_curr_desc, 0x02);
++				connection->curr_rx_skb = skb;
++				skb_reserve(skb, RX_INSERT_BYTES);
++				skb_put(skb, pkt_size);
++				skb->dev = dev;
++				skb->protocol = eth_type_trans(skb, dev);
++				{
++					struct iphdr* ip_hdr = (struct iphdr*)&(skb->data[0]);
++					if (toe_curr_desc->word3.bits.ctrl_flag)
++						printk("%s::ip id %x\n", __func__, ntohs(ip_hdr->id));
++				}
++				skb->ip_summed = CHECKSUM_UNNECESSARY;
++
++				netif_rx(skb);
++				dev->last_rx = jiffies;
++#if 0
++				if ((skb = dev_alloc_skb(RX_BUF_SIZE)) == NULL) {
++					printk("%s::alloc buf fail!\n", __func__);
++				}
++				*(unsigned int*)(skb->data) = (unsigned int)skb;
++				connection->curr_rx_skb = skb;
++				skb_reserve(skb, SKB_RESERVE_BYTES);
++				spin_lock_irqsave(&connection->gmac->rx_mutex, flags);
++				fq_rwptr.bits32 = readl(TOE_GLOBAL_BASE + GLOBAL_SWFQ_RWPTR_REG);
++				if (toe_private_data.fq_rx_rwptr.bits.wptr != fq_rwptr.bits.wptr) {
++					mac_stop_txdma((struct net_device*)connection->dev);
++					spin_unlock_irqrestore(&connection->gmac->rx_mutex, flags);
++					while(1);
++				}
++				fq_desc = (GMAC_RXDESC_T*)toe_private_data.swfq_desc_base + fq_rwptr.bits.wptr;
++				fq_desc->word2.buf_adr = (unsigned int)__pa(skb->data);
++				fq_rwptr.bits.wptr = RWPTR_ADVANCE_ONE(fq_rwptr.bits.wptr, TOE_SW_FREEQ_DESC_NUM);
++				SET_WPTR(TOE_GLOBAL_BASE+GLOBAL_SWFQ_RWPTR_REG, fq_rwptr.bits.wptr);
++				toe_private_data.fq_rx_rwptr.bits32 = fq_rwptr.bits32;
++				spin_unlock_irqrestore(&connection->gmac->rx_mutex, flags);
++#endif
++//				spin_lock_irqsave(&connection->gmac->rx_mutex, flags);
++				toeq_rwptr.bits.rptr = RWPTR_ADVANCE_ONE(toeq_rwptr.bits.rptr, TOE_TOE_DESC_NUM);
++				SET_RPTR(&toe_qhdr->word1, toeq_rwptr.bits.rptr);
++//				spin_unlock_irqrestore(&connection->gmac->rx_mutex, flags);
++				connection->toeq_rwptr.bits32 = toeq_rwptr.bits32;
++			}
++			toeq_rwptr.bits32 = readl(&toe_qhdr->word1);
++//			toe_gmac_fill_free_q();
++		}
++		connection->last_rx_jiffies = jiffies;
++		if (connection->status != TCP_CONN_CLOSED)
++			mod_timer(&connection->rx_timer, jiffies+2);
++		if (connection->status != TCP_CONN_ESTABLISHED)
++			printk("%s::conn status %x\n", __func__, connection->status);
++		hash_set_valid_flag(connection->hash_entry_index, 1);
++		enable_irq(connection->gmac->irq);
++		// Gary Chen spin_unlock_irqrestore(&connection->conn_lock, conn_flags);
++	}
++}
++
++/*---------------------------------------------------------------------------
++ * free_toeq_descs
++ *-------------------------------------------------------------------------*/
++void free_toeq_descs(int qid, TOE_INFO_T *toe)
++{
++	void	*desc_ptr;
++
++	desc_ptr = (void*)toe->toe_desc_base[qid];
++	pci_free_consistent(NULL, TOE_TOE_DESC_NUM*sizeof(GMAC_RXDESC_T), desc_ptr,
++	   (dma_addr_t)toe->toe_desc_base_dma[qid]);
++	toe->toe_desc_base[qid] = 0;
++}
++
++/*---------------------------------------------------------------------------
++ * set_toeq_hdr
++ *-------------------------------------------------------------------------*/
++void set_toeq_hdr(struct toe_conn*	connection, TOE_INFO_T* toe, struct net_device *dev)
++{
++	volatile TOE_QHDR_T	*toe_qhdr;
++	volatile unsigned int	toeq_wptr; // toeq_rptr
++	volatile GMAC_RXDESC_T	*toe_curr_desc;
++	struct sk_buff	*skb;
++	unsigned int	pkt_size;
++	DMA_RWPTR_T	toeq_rwptr;
++
++	if (connection->status == TCP_CONN_CLOSING) {
++		connection->status = TCP_CONN_CLOSED;
++		hash_set_valid_flag(connection->hash_entry_index, 0);
++		// remove timer first.
++		// del_timer_sync(&(connection->rx_timer));
++		// check if any queued frames last time.
++		toe_qhdr = (volatile TOE_QHDR_T*)TOE_TOE_QUE_HDR_BASE;
++		toe_qhdr += connection->qid;
++		toeq_rwptr.bits32 = readl(&toe_qhdr->word1);
++
++		//toeq_rptr = toe_qhdr->word1.bits.rptr;
++		toeq_wptr = toe_qhdr->word1.bits.wptr;
++		while (toeq_rwptr.bits.rptr != toeq_wptr) {
++			printk("%s::pending frames in TOE Queue before closing!\n", __func__);
++			toe_curr_desc = (GMAC_RXDESC_T*)(toe->toe_desc_base[connection->qid] +
++				toe_qhdr->word1.bits.rptr*sizeof(GMAC_RXDESC_T));
++			connection->curr_desc = (GMAC_RXDESC_T *)toe_curr_desc;
++			pkt_size = toe_curr_desc->word1.bits.byte_count;
++			consistent_sync((void*)__va(toe_curr_desc->word2.buf_adr), pkt_size,
++				PCI_DMA_FROMDEVICE);
++			skb = (struct sk_buff*)(REG32(__va(toe_curr_desc->word2.buf_adr) -
++				SKB_RESERVE_BYTES));
++			_debug_skb(skb, (GMAC_RXDESC_T *)toe_curr_desc, 0x03);
++			connection->curr_rx_skb = skb;
++			skb_reserve(skb, RX_INSERT_BYTES);
++			skb_put(skb, pkt_size);
++			skb->dev = connection->dev;
++			skb->protocol = eth_type_trans(skb, connection->dev);
++			skb->ip_summed = CHECKSUM_UNNECESSARY;
++			netif_rx(skb);
++			connection->dev->last_rx = jiffies;
++
++			toeq_rwptr.bits.rptr = RWPTR_ADVANCE_ONE(toeq_rwptr.bits.rptr, TOE_TOE_DESC_NUM);
++			SET_RPTR(&toe_qhdr->word1, toeq_rwptr.bits.rptr);
++		}
++		free_toeq_descs(connection->qid, toe);
++		// shall we re-fill free queue?
++
++		reset_connection_index(connection->qid);
++		//memset(connection, 0, sizeof(struct toe_conn));
++		printk(" del timer and close connection %x, qid %d\n", (u32)connection, connection->qid);
++		return;
++	}
++	/* enable or setup toe queue header */
++	if (connection->status == TCP_CONN_CONNECTING && storlink_ctl.rx_max_pktsize) {
++		volatile TOE_QHDR_T	*qhdr;
++		int iq_id;
++		connection->status = TCP_CONN_ESTABLISHED;
++		qhdr = (volatile TOE_QHDR_T*)((unsigned int)TOE_TOE_QUE_HDR_BASE +
++		               connection->qid * sizeof(TOE_QHDR_T));
++
++		iq_id = get_interrupt_queue_id(connection->qid);
++		connection->dev = dev;
++		connection->gmac = dev->priv;
++		connection->toeq_rwptr.bits32 = 0;
++
++//		qhdr->word6.bits.iq_num = iq_id;
++		qhdr->word6.bits.MaxPktSize = (connection->max_pktsize)>>2; // in word.
++		qhdr->word7.bits.AckThreshold = connection->ack_threshold;
++		qhdr->word7.bits.SeqThreshold = connection->seq_threshold;
++
++		// init timer.
++#if 1
++		init_timer(&connection->rx_timer);
++		connection->rx_timer.expires = jiffies + 5;
++		connection->rx_timer.data = (unsigned long)connection;
++		connection->rx_timer.function = (void *)&connection_rx_timer;
++		add_timer(&connection->rx_timer);
++		connection->last_rx_jiffies = jiffies;
++		printk("init_timer %x\n", (u32)jiffies);
++#endif
++		hash_set_valid_flag(connection->hash_entry_index, 1);
++		return;
++	} else {
++		printk("%s::conn status %x, rx_pktsize %d\n",
++			__func__, connection->status, storlink_ctl.rx_max_pktsize);
++	}
++}
++
++/*---------------------------------------------------------------------------
++ * get_connection_index
++ * get_connection_index will find an available index for the connection,
++ * when allocate a new connection is needed.
++ * we find available Qid from AV bits and write to hash_table, so that when RxTOE
++ * packet is received, sw_id from ToeQ descriptor is also the Qid of conneciton Q.
++ *-------------------------------------------------------------------------*/
++int get_connection_index(void)
++{
++	int i=0, j=0, index=-1;
++	__u32	connection_bits;
++
++	for (i = 0; i< TOE_TOE_QUEUE_NUM/32; i++) {
++		connection_bits = ~(toe_connection_bits[i]);
++		if (connection_bits == 0)
++			// all 32 bits are used.
++			continue;
++
++		for (j=0; j<32; j++) {
++			if (connection_bits & 0x01) {
++				index = i*32 + j;
++				return index;
++			}
++			connection_bits = connection_bits >> 1;
++		}
++	}
++	return index;
++}
++
++/*---------------------------------------------------------------------------
++ * set_toe_connection
++ *-------------------------------------------------------------------------*/
++void set_toe_connection(int index, int val)
++{
++	if (val) {
++		toe_connection_bits[index/32] |= (1<<(index%32));
++	} else {
++		toe_connection_bits[index/32] &= (~(1<<(index%32)));
++	}
++}
++
++/*---------------------------------------------------------------------------
++ * sl351x_get_toe_conn_flag
++ *-------------------------------------------------------------------------*/
++int sl351x_get_toe_conn_flag(int index)
++{
++	if (index < TOE_TOE_QUEUE_NUM)
++		return (toe_connection_bits[index/32] & (1 << (index %32)));
++	else
++		return 0;
++}
++
++/*---------------------------------------------------------------------------
++ * sl351x_get_toe_conn_info
++ *-------------------------------------------------------------------------*/
++struct toe_conn * sl351x_get_toe_conn_info(int index)
++{
++	if (index < TOE_TOE_QUEUE_NUM)
++		return (struct toe_conn *)&toe_connections[index];
++	else
++		return NULL;
++}
++
++/*---------------------------------------------------------------------------
++ * create_sw_toe_connection
++ *-------------------------------------------------------------------------*/
++struct toe_conn* create_sw_toe_connection(int qid, int ip_ver, void* ip_hdr,
++	struct tcphdr* tcp_hdr)
++{
++	struct toe_conn*	connection =  &(toe_connections[qid]);
++
++	connection->ip_ver = (__u8)ip_ver;
++	connection->qid = (__u8)qid;
++	connection->source = (__u16)tcp_hdr->source;
++	connection->dest = (__u16)tcp_hdr->dest;
++	if (ip_ver == 4) {
++		struct iphdr* iph = (struct iphdr*) ip_hdr;
++		connection->saddr[0] = (__u32)iph->saddr;
++		connection->daddr[0] = (__u32)iph->daddr;
++//		printk("%s::saddr %x, daddr %x\n", __func__,
++//			ntohl(connection->saddr[0]), ntohl(connection->daddr[0]));
++	} else if (ip_ver == 6) {
++		struct ipv6hdr *iph = (struct ipv6hdr*)ip_hdr;
++		int i=0;
++		for (i=0; i<4; i++) {
++			connection->saddr[i] = (__u32)iph->saddr.in6_u.u6_addr32[i];
++			connection->daddr[i] = (__u32)iph->daddr.in6_u.u6_addr32[i];
++		}
++	}
++	connection->status = TCP_CONN_CREATION;
++	return connection;
++}
++
++/*---------------------------------------------------------------------------
++ * fill_toeq_buf
++ *-------------------------------------------------------------------------*/
++int fill_toeq_buf(int index, TOE_INFO_T* toe)
++{
++	volatile TOE_QHDR_T	*qhdr;
++	//struct toe_conn* connection;
++	GMAC_RXDESC_T	*desc_ptr;
++
++	if (!toe->toe_desc_base[index]) {
++		// first time. init.
++		desc_ptr = (GMAC_RXDESC_T*)(pci_alloc_consistent(NULL, TOE_TOE_DESC_NUM
++		            *sizeof(GMAC_RXDESC_T), (dma_addr_t*)&toe->toe_desc_base_dma[index]));
++
++		toe->toe_desc_num = TOE_TOE_DESC_NUM;
++		toe->toe_desc_base[index] = (unsigned int)desc_ptr;
++	}
++	qhdr = (volatile TOE_QHDR_T*)((unsigned int)TOE_TOE_QUE_HDR_BASE +
++									index*sizeof(TOE_QHDR_T));
++	//connection = (struct toe_conn*)&(toe_connections[index]);
++
++	qhdr->word0.base_size = ((unsigned int)toe->toe_desc_base_dma[index]&TOE_QHDR0_BASE_MASK)
++					| TOE_TOE_DESC_POWER;
++	qhdr->word1.bits32 = 0;
++	qhdr->word2.bits32 = 0;
++	qhdr->word3.bits32 = 0;
++	qhdr->word4.bits32 = 0;
++	qhdr->word5.bits32 = 0;
++	return 1;
++}
++
++/*---------------------------------------------------------------------------
++ * create_toe_hash_entry_smb
++ * add SMB header in hash entry.
++ *-------------------------------------------------------------------------*/
++int create_toe_hash_entry_smb(int ip_ver, void* ip_hdr, struct tcphdr* tcp_hdr,
++	int sw_id)
++{
++	HASH_ENTRY_T	hash_entry, *entry;
++	int	hash_entry_index;
++	int i;
++
++	entry = (HASH_ENTRY_T*)&hash_entry;
++	memset((void*)entry, 0, sizeof(HASH_ENTRY_T));
++	entry->rule = 0;
++
++	/* enable fields of hash key */
++	entry->key_present.ip_protocol = 1;
++	entry->key_present.sip = 1;
++	entry->key_present.dip = 1;
++	entry->key_present.l4_bytes_0_3 = 1;	// src port and dest port
++	entry->key_present.l7_bytes_0_3 = 0;	// do we need to enable NETBIOS? how?
++	entry->key_present.l7_bytes_4_7 = 1;	// "SMB" header
++
++	/* hash key */
++	entry->key.ip_protocol = IPPROTO_TCP;
++	if (ip_ver == 4) {
++		struct iphdr *iph = (struct iphdr*)ip_hdr;
++		memcpy(entry->key.sip, &iph->saddr, 4);
++		memcpy(entry->key.dip, &iph->daddr, 4);
++	} else if (ip_ver == 6) {
++		struct ipv6hdr *iph = (struct ipv6hdr*)ip_hdr;
++		for (i=0; i<4; i++) {
++			memcpy(&(entry->key.sip[i*4]), &(iph->saddr.in6_u.u6_addr32[i]), 4);
++			memcpy(&(entry->key.dip[i*4]), &(iph->daddr.in6_u.u6_addr32[i]), 4);
++		}
++	}
++	*(__u16*)&entry->key.l4_bytes[0] = tcp_hdr->source;
++	*(__u16*)&entry->key.l4_bytes[2] = tcp_hdr->dest;
++
++	entry->key.l7_bytes[4] = 0xff;
++	entry->key.l7_bytes[5] = 0x53;
++	entry->key.l7_bytes[6] = 0x4d;
++	entry->key.l7_bytes[7] = 0x42;
++
++	/* action of hash entry match */
++	entry->action.sw_id = 1;
++	entry->action.dest_qid = (__u8)TOE_TOE_QID(sw_id);
++	entry->action.srce_qid = 0;
++	hash_entry_index = hash_add_toe_entry(entry);
++
++	return hash_entry_index;
++}
++
++// best performance of tcp streaming.
++/*---------------------------------------------------------------------------
++ * create_toe_hash_entry_smb
++ * add SMB header in hash entry.
++ *-------------------------------------------------------------------------*/
++int create_toe_hash_entry_ftp(int ip_ver, void* ip_hdr, struct tcphdr* tcphdr)
++{
++	return 0;
++}
++
++// is hash entry for nfs needed?
++
++/*
++ * Create a TOE hash entry by given ip addresses and tcp port numbers.
++ * hash entry index will be saved in sw connection.
++ */
++/*---------------------------------------------------------------------------
++ * create_toe_hash_entry
++ *-------------------------------------------------------------------------*/
++int create_toe_hash_entry(int ip_ver, void* ip_hdr, struct tcphdr* tcp_hdr, int sw_id)
++{
++	HASH_ENTRY_T	hash_entry, *entry;
++//	unsigned long	hash_key[HASH_MAX_DWORDS];
++	int	hash_entry_index;
++
++	entry = (HASH_ENTRY_T*) &hash_entry;
++	memset((void*)entry, 0, sizeof(HASH_ENTRY_T));
++	entry->rule = 0;
++	/* enable fields of hash key */
++	entry->key_present.ip_protocol = 1;
++	entry->key_present.sip = 1;
++	entry->key_present.dip = 1;
++	entry->key_present.l4_bytes_0_3 = 1;	// src port and dest port
++
++	/* hash key */
++	entry->key.ip_protocol = IPPROTO_TCP;
++	if (ip_ver == 4) {
++		// key of ipv4
++		struct iphdr* iph = (struct iphdr*)ip_hdr;
++		memcpy(entry->key.sip, &iph->saddr, 4);
++		memcpy(entry->key.dip, &iph->daddr, 4);
++	} else if (ip_ver == 6) {
++		// key of ipv6
++		int i=0;
++		struct ipv6hdr *iph = (struct ipv6hdr*)ip_hdr;
++		for (i=0; i<4; i++) {
++			memcpy(&(entry->key.sip[i*4]), &(iph->saddr.in6_u.u6_addr32[i]), 4);
++			memcpy(&(entry->key.dip[i*4]), &(iph->daddr.in6_u.u6_addr32[i]), 4);
++		}
++	}
++	*(__u16*)&entry->key.l4_bytes[0] = tcp_hdr->source;
++	*(__u16*)&entry->key.l4_bytes[2] = tcp_hdr->dest;
++	// is it necessary to write ip version to hash key?
++
++	/* action of hash entry match */
++	entry->action.sw_id = 1;
++	entry->action.dest_qid = (__u8)TOE_TOE_QID(sw_id);
++	entry->action.srce_qid = 0;	// 0 for SW FreeQ. 1 for HW FreeQ.
++	hash_entry_index = hash_add_toe_entry(entry);
++//	printk("\n%s. sw_id %d, hash_entry index %x\n",
++//		__func__, TOE_TOE_QID(sw_id), hash_entry_index);
++	return hash_entry_index;
++}
++
++/*---------------------------------------------------------------------------
++ * init_toeq
++ * 1. Reserve a TOE Queue id first, to get the sw toe_connection.
++ * 2. Setup the hash entry with given iphdr and tcphdr, save hash entry index
++ *    in sw toe_connection.
++ * 3. Prepare sw toe_connection and allocate buffers.
++ * 4. Validate hash entry.
++ *-------------------------------------------------------------------------*/
++struct toe_conn* init_toeq(int ipver, void* iph, struct tcphdr* tcp_hdr,
++	TOE_INFO_T* toe, unsigned char* l2hdr)
++{
++//	printk("\t*** %s, ipver %d\n", __func__, ipver);
++	int qid=-1;
++	struct toe_conn* connection;
++	int hash_entry_index;
++	// int i=0;
++	unsigned short	dest_port = ntohs(tcp_hdr->dest);
++
++	if (dest_port == 445) {
++		printk("%s::SMB/CIFS connection\n", __func__);
++	} else if (dest_port == 20) {
++		printk("%s::ftp-data connection\n", __func__);
++	} else if (dest_port == 2049) {
++		printk("%s::nfs daemon connection\n", __func__);
++	}
++	qid = get_connection_index();
++	if (qid<0)
++		return 0;	// setup toeq failure
++	set_toe_connection(qid, 1); // reserve this sw toeq.
++
++	//connection = (struct toe_conn*)&(toe_connections[qid]);
++	hash_entry_index = create_toe_hash_entry(ipver, iph, tcp_hdr, qid);
++	if (hash_entry_index <0) {
++		printk("%s::release toe hash entry!\n", __func__);
++		set_toe_connection(qid, 0); // release this sw toeq.
++		return 0;
++	}
++	connection = create_sw_toe_connection(qid, ipver, iph, tcp_hdr);
++	connection->hash_entry_index = (__u16) hash_entry_index;
++
++	fill_toeq_buf(qid, toe);
++	memcpy(&connection->l2_hdr, l2hdr, sizeof(struct ethhdr));
++	spin_lock_init(&connection->conn_lock);
++
++	return connection;
++}
++
++#if 0
++/*----------------------------------------------------------------------
++*   toe_init_toe_queue
++*   (1) Initialize the TOE Queue Header
++*       Register: TOE_TOE_QUE_HDR_BASE (0x60003000)
++*   (2) Initialize Descriptors of TOE Queues
++*----------------------------------------------------------------------*/
++void toe_init_toe_queue(TOE_INFO_T* toe)
++{
++}
++EXPORT_SYMBOL(toe_init_toe_queue);
++#endif
++
++/*---------------------------------------------------------------------------
++ * dump_jumbo_skb
++ *-------------------------------------------------------------------------*/
++void dump_jumbo_skb(struct jumbo_frame *jumbo_skb)
++{
++	if (jumbo_skb->skb0) {
++//		printk("%s. jumbo skb %x, len %d\n",
++//			__func__, jumbo_skb->skb0->data, jumbo_skb->skb0->len);
++		netif_rx(jumbo_skb->skb0);
++	}
++	jumbo_skb->skb0 = 0;
++	jumbo_skb->tail = 0;
++	jumbo_skb->iphdr0 = 0;
++	jumbo_skb->tcphdr0 = 0;
++}
++
++/* ---------------------------------------------------------------------
++ * Append skb to skb0. skb0 is the jumbo frame that will be passed to
++ * kernel tcp.
++ * --------------------------------------------------------------------*/
++void rx_append_skb(struct jumbo_frame *jumbo_skb, struct sk_buff* skb, int payload_len)
++{
++	struct iphdr* iphdr0 = (struct iphdr*)&(skb->data[0]);
++	int ip_hdrlen = iphdr0->ihl << 2;
++	struct tcphdr* tcphdr0 = (struct tcphdr*)&(skb->data[ip_hdrlen]);
++
++	if (!jumbo_skb->skb0) {
++		// head of the jumbo frame.
++		jumbo_skb->skb0 = skb;
++		jumbo_skb->tail = 0;
++		jumbo_skb->iphdr0 = iphdr0;
++		jumbo_skb->tcphdr0 = tcphdr0;
++	} else {
++		if (!jumbo_skb->tail)
++			skb_shinfo(jumbo_skb->skb0)->frag_list = skb;
++		else
++			(jumbo_skb->tail)->next = skb;
++		jumbo_skb->tail = skb;
++
++		// do we need to change truesize as well?
++		jumbo_skb->skb0->len += payload_len;
++		jumbo_skb->skb0->data_len += payload_len;
++
++		jumbo_skb->iphdr0->tot_len = htons(ntohs(jumbo_skb->iphdr0->tot_len)+payload_len);
++		jumbo_skb->tcphdr0->ack_seq = tcphdr0->ack_seq;
++		jumbo_skb->tcphdr0->window = tcphdr0->window;
++
++		skb->len += payload_len;
++		skb->data_len = 0;
++		skb->data += ntohs(iphdr0->tot_len) - payload_len;
++	}
++}
++
++/*----------------------------------------------------------------------
++* toe_gmac_handle_toeq
++* (1) read interrupt Queue to get TOE Q.
++* (2) get packet fro TOE Q and send to upper layer handler.
++* (3) allocate new buffers and put to TOE Q. Intr Q buffer is recycled.
++*----------------------------------------------------------------------*/
++void toe_gmac_handle_toeq(struct net_device *dev, GMAC_INFO_T* tp, __u32 status)
++{
++	//volatile INTRQ_INFO_T	*intrq_info;
++	//TOEQ_INFO_T		*toeq_info;
++	volatile NONTOE_QHDR_T	*intr_qhdr;
++	volatile TOE_QHDR_T		*toe_qhdr;
++	volatile INTR_QHDR_T	*intr_curr_desc;
++	TOE_INFO_T	*toe = &toe_private_data;
++
++	volatile GMAC_RXDESC_T	*toe_curr_desc; // , *fq_desc;// *tmp_desc;
++	volatile DMA_RWPTR_T	intr_rwptr, toeq_rwptr;  // fq_rwptr;
++
++	unsigned int 	pkt_size, desc_count, tcp_qid;
++	volatile unsigned int	toeq_wptr;
++	struct toe_conn*		connection;
++	int		i, frag_id = 0;
++	// unsigned long	toeq_flags;
++	struct jumbo_frame	jumbo_skb;
++	struct sk_buff	*skb;
++	__u32	interrupt_status;
++
++	in_toe_isr++;
++
++	interrupt_status = status >> 24;
++	// get interrupt queue header
++	intr_qhdr = (volatile NONTOE_QHDR_T*)TOE_INTR_Q_HDR_BASE;
++	memset(&jumbo_skb, 0, sizeof(struct jumbo_frame));
++
++	for (i=0; i> 1;
++			continue;
++		}
++		interrupt_status = interrupt_status >> 1;
++		intr_rwptr.bits32 = readl(&intr_qhdr->word1);
++
++		while ( intr_rwptr.bits.rptr != intr_rwptr.bits.wptr) {
++			int max_pktsize = 1;
++			// get interrupt queue descriptor.
++			intr_curr_desc = (INTR_QHDR_T*)toe->intr_desc_base +
++				i* TOE_INTR_DESC_NUM + intr_rwptr.bits.rptr;
++//			printk("%s::int %x\n", __func__, intr_curr_desc->word1.bits32);
++			// get toeq id
++			tcp_qid = (u8)intr_curr_desc->word1.bits.tcp_qid - (u8)TOE_TOE_QID(0);
++			// get toeq queue header
++			toe_qhdr = (volatile TOE_QHDR_T*) TOE_TOE_QUE_HDR_BASE;
++			toe_qhdr += tcp_qid;
++			connection = &toe_connections[tcp_qid];
++			del_timer(&connection->rx_timer);
++			// Gary Chen spin_lock_irqsave(&connection->conn_lock, toeq_flags);
++			// handling interrupts of this TOE Q.
++			if (intr_curr_desc->word1.bits.ctl || intr_curr_desc->word1.bits.osq ||
++				intr_curr_desc->word1.bits.abn)
++				max_pktsize = 0;
++			if (!max_pktsize || intr_curr_desc->word1.bits.TotalPktSize) {
++				desc_count=0;
++				// wptr in intl queue is where this TOE interrupt should stop.
++				toeq_rwptr.bits32 = readl(&toe_qhdr->word1);
++				toeq_wptr = intr_curr_desc->word0.bits.wptr;
++				if (connection->toeq_rwptr.bits.rptr != toeq_rwptr.bits.rptr)
++					printk("conn rptr %d, hw rptr %d\n",
++						connection->toeq_rwptr.bits.rptr, toeq_rwptr.bits.rptr);
++
++				if (intr_curr_desc->word1.bits.ctl &&
++					(toeq_rwptr.bits.rptr == toeq_wptr)) {
++					printk("\nctrl frame, but not in TOE queue! conn rptr %d, hw wptr %d\n",
++						connection->toeq_rwptr.bits.rptr, toeq_wptr);
++//					dump_toe_qhdr(toe_qhdr);
++//					dump_intrq_desc(intr_curr_desc);
++				}
++				// while (toeq_rwptr.bits.rptr != intr_curr_desc->word0.bits.wptr) {
++				while (toe_qhdr->word1.bits.rptr != intr_curr_desc->word0.bits.wptr) {
++					frag_id++;
++					toe_curr_desc = (volatile GMAC_RXDESC_T *)(toe->toe_desc_base[tcp_qid]
++						+ toe_qhdr->word1.bits.rptr *sizeof(GMAC_RXDESC_T));
++					connection->curr_desc = (GMAC_RXDESC_T *)toe_curr_desc;
++					desc_count = toe_curr_desc->word0.bits.desc_count;
++					pkt_size = toe_curr_desc->word1.bits.byte_count;
++					consistent_sync((void*)__va(toe_curr_desc->word2.buf_adr), pkt_size,
++						PCI_DMA_FROMDEVICE);
++					skb = (struct sk_buff*)(REG32(__va(toe_curr_desc->word2.buf_adr)-
++						SKB_RESERVE_BYTES));
++					_debug_skb(skb, (GMAC_RXDESC_T *)toe_curr_desc, 0x01);
++					connection->curr_rx_skb = skb;
++					skb_reserve(skb, RX_INSERT_BYTES);
++					if ((skb->len + pkt_size) > (1514+16))
++					{
++						printk("skb->len=%d, pkt_size=%d\n",skb->len, pkt_size);
++						while(1);
++					}
++
++					skb_put(skb, pkt_size);
++					skb->dev = dev;
++					skb->protocol = eth_type_trans(skb, dev);
++					skb->ip_summed = CHECKSUM_UNNECESSARY;
++
++					if (toe_curr_desc->word3.bits32 & 0x1b000000)
++						dump_jumbo_skb(&jumbo_skb);
++
++					rx_append_skb(&jumbo_skb, skb, pkt_size-toe_curr_desc->word3.bits.l7_offset);
++//					spin_lock_irqsave(&gmac_fq_lock, flags);
++					toeq_rwptr.bits.rptr = RWPTR_ADVANCE_ONE(toeq_rwptr.bits.rptr, TOE_TOE_DESC_NUM);
++					SET_RPTR(&toe_qhdr->word1, toeq_rwptr.bits.rptr);
++//					spin_unlock_irqrestore(&gmac_fq_lock, flags);
++					if (storlink_ctl.fqint_threshold)
++						continue;
++#if 0
++//#if (HANDLE_FREEQ_METHOD == HANDLE_FREEQ_INDIVIDUAL)
++					if ((skb = dev_alloc_skb(RX_BUF_SIZE)) == NULL) {
++						printk("%s::toe queue alloc buffer ", __func__);
++					}
++					*(unsigned int*)(skb->data) = (unsigned int)skb;
++					connection->curr_rx_skb = skb;
++					skb_reserve(skb, SKB_RESERVE_BYTES);
++
++					spin_lock_irqsave(&gmac_fq_lock, flags);
++					fq_rwptr.bits32 = readl(TOE_GLOBAL_BASE + GLOBAL_SWFQ_RWPTR_REG);
++					if (toe->fq_rx_rwptr.bits.wptr != fq_rwptr.bits.wptr) {
++						printk("%s::fq_rx_rwptr %x\n", __func__, toe->fq_rx_rwptr.bits32);
++						mac_stop_txdma((struct net_device*) tp->dev);
++						spin_unlock_irqrestore(&gmac_fq_lock, flags);
++						while(1);
++					}
++					fq_desc = (GMAC_RXDESC_T*)toe->swfq_desc_base + fq_rwptr.bits.wptr;
++					fq_desc->word2.buf_adr = (unsigned int)__pa(skb->data);
++
++					fq_rwptr.bits.wptr = RWPTR_ADVANCE_ONE(fq_rwptr.bits.wptr, TOE_SW_FREEQ_DESC_NUM);
++					SET_WPTR(TOE_GLOBAL_BASE + GLOBAL_SWFQ_RWPTR_REG, fq_rwptr.bits.wptr);
++					toe->fq_rx_rwptr.bits32 = fq_rwptr.bits32;
++					spin_unlock_irqrestore(&gmac_fq_lock, flags);
++#endif
++				} // end of this multi-desc.
++				dump_jumbo_skb(&jumbo_skb);
++				dev->last_rx = jiffies;
++				connection->toeq_rwptr.bits32 = toeq_rwptr.bits32;
++			} else if (intr_curr_desc->word1.bits.sat) {
++				toeq_rwptr.bits32 = readl(&toe_qhdr->word1);
++				toeq_wptr = intr_curr_desc->word0.bits.wptr;
++				if (connection->toeq_rwptr.bits.rptr != toeq_rwptr.bits.rptr)
++					printk("SAT. conn rptr %d, hw rptr %d\n",
++						connection->toeq_rwptr.bits.rptr, toeq_rwptr.bits.rptr);
++/*
++					printk("%s::SAT int!, ackcnt %x, seqcnt %x, rptr %d, wptr %d, ack %x, qhack %x\n",
++ 						__func__, intr_curr_desc->word4.bits.AckCnt, intr_curr_desc->word4.bits.SeqCnt,
++						toeq_rptr, toeq_wptr, intr_curr_desc->word3.ack_num, toe_qhdr->word4.ack_num);*/
++				/* pure ack */
++				if (toeq_rwptr.bits.rptr == toeq_wptr) {
++					if (intr_curr_desc->word4.bits32) {
++						skb = gen_pure_ack(connection, (TOE_QHDR_T *)toe_qhdr, (INTR_QHDR_T *)intr_curr_desc);
++						skb_put(skb, 60);
++						skb->dev = connection->dev;
++						skb->ip_summed = CHECKSUM_UNNECESSARY;
++						skb->protocol = eth_type_trans(skb, connection->dev);
++						netif_rx(skb);
++					} else
++						printk("%s::SAT Interrupt!. But cnt is 0!\n", __func__);
++				} else {
++					// while (toeq_rwptr.bits.rptr != toeq_wptr) {
++					while (toe_qhdr->word1.bits.rptr != intr_curr_desc->word0.bits.wptr) {
++						toe_curr_desc = (volatile GMAC_RXDESC_T*)(toe->toe_desc_base[tcp_qid]
++							+ toe_qhdr->word1.bits.rptr * sizeof(GMAC_RXDESC_T));
++						connection->curr_desc = (GMAC_RXDESC_T *)toe_curr_desc;
++						desc_count = toe_curr_desc->word0.bits.desc_count;
++						pkt_size = toe_curr_desc->word1.bits.byte_count;
++						consistent_sync((void*)__va(toe_curr_desc->word2.buf_adr), pkt_size,
++							PCI_DMA_FROMDEVICE);
++						// if ( ((toeq_rwptr.bits.rptr +1)&(TOE_TOE_DESC_NUM-1)) == toeq_wptr) {
++						if ( RWPTR_ADVANCE_ONE(toe_qhdr->word1.bits.rptr, TOE_TOE_DESC_NUM) == toeq_wptr) {
++							skb = (struct sk_buff*)(REG32(__va(toe_curr_desc->word2.buf_adr) -
++								SKB_RESERVE_BYTES));
++							_debug_skb(skb, (GMAC_RXDESC_T *)toe_curr_desc, 0x04);
++							connection->curr_rx_skb = skb;
++							skb_reserve(skb, RX_INSERT_BYTES);
++							skb_put(skb, pkt_size);
++							skb->dev = dev;
++							skb->protocol = eth_type_trans(skb, dev);
++							skb->ip_summed = CHECKSUM_UNNECESSARY;
++							// printk("toeq_rptr %d, wptr %d\n", toeq_rptr, toeq_wptr);
++							netif_rx(skb);
++							dev->last_rx = jiffies;
++/*
++							if ((skb = dev_alloc_skb(RX_BUF_SIZE)) == NULL) {
++
++							}
++							*(unsigned int*)(skb->data) = (unsigned int) skb;
++							skb_reserve(skb, SKB_RESERVE_BYTES); */
++						} else {
++							// reuse this skb, append to free queue..
++							skb = (struct sk_buff*)(REG32(__va(toe_curr_desc->word2.buf_adr)-
++								SKB_RESERVE_BYTES));
++							_debug_skb(skb, (GMAC_RXDESC_T *)toe_curr_desc, 0x05);
++							connection->curr_rx_skb = skb;
++							dev_kfree_skb_irq(skb);
++						}
++#if 0
++						spin_lock_irqsave(&gmac_fq_lock, flags);
++						fq_rwptr.bits32 = readl(TOE_GLOBAL_BASE + GLOBAL_SWFQ_RWPTR_REG);
++/*						if (toe->fq_rx_rwptr.bits.wptr != fq_rwptr.bits.wptr) {
++							printk("%s::fq_rx_rwptr %x\n", __func__, toe->fq_rx_rwptr.bits32);
++							mac_stop_txdma((struct net_device*) tp->dev);
++							spin_unlock_irqrestore(&gmac_fq_lock, flags);
++							while(1);
++						} */
++						fq_desc = (GMAC_RXDESC_T*)toe->swfq_desc_base + fq_rwptr.bits.wptr;
++						fq_desc->word2.buf_adr = (unsigned int)__pa(skb->data);
++
++						fq_rwptr.bits.wptr = RWPTR_ADVANCE_ONE(fq_rwptr.bits.wptr, TOE_SW_FREEQ_DESC_NUM);
++						SET_WPTR(TOE_GLOBAL_BASE + GLOBAL_SWFQ_RWPTR_REG, fq_rwptr.bits.wptr);
++						toe->fq_rx_rwptr.bits32 = fq_rwptr.bits32;
++	//					spin_unlock_irqrestore(&gmac_fq_lock, flags);
++#endif
++//						spin_lock_irqsave(&gmac_fq_lock, flags);
++						toeq_rwptr.bits.rptr = RWPTR_ADVANCE_ONE(toeq_rwptr.bits.rptr, TOE_TOE_DESC_NUM);
++						SET_RPTR(&toe_qhdr->word1, toeq_rwptr.bits.rptr);
++//						spin_unlock_irqrestore(&gmac_fq_lock, flags);
++					}
++				} // end of ACK with options.
++				connection->toeq_rwptr.bits32 = toeq_rwptr.bits32;
++				// Gary Chen spin_unlock_irqrestore(&connection->conn_lock, toeq_flags);
++//				}
++			};
++			update_timer(connection);
++			// any protection against interrupt queue header?
++			intr_rwptr.bits.rptr = RWPTR_ADVANCE_ONE(intr_rwptr.bits.rptr, TOE_INTR_DESC_NUM);
++			SET_RPTR(&intr_qhdr->word1, intr_rwptr.bits.rptr);
++			intr_rwptr.bits32 = readl(&intr_qhdr->word1);
++			toe_gmac_fill_free_q();
++		} // end of this interrupt Queue processing.
++	} // end of all interrupt Queues.
++
++	in_toe_isr = 0;
++}
++
++
+--- /dev/null
++++ b/drivers/net/sl_lepus_hash.c
+@@ -0,0 +1,553 @@
++/**************************************************************************
++* Copyright 2006 StorLink Semiconductors, Inc.  All rights reserved.
++*--------------------------------------------------------------------------
++* Name			: sl_lepus_hash.c
++* Description	:
++*		Handle Storlink Lepus Hash Functions
++*
++* History
++*
++*	Date		Writer		Description
++*----------------------------------------------------------------------------
++*	03/13/2006	Gary Chen	Create and implement
++*
++****************************************************************************/
++#include 
++#include 
++#include 
++#include 
++#include 
++#include 
++#include 
++#include 
++#include 
++#include 
++#include 
++#include 
++#include 
++#include 
++#include 
++#include 
++#include 
++#include 
++#include 
++#include 
++#include 
++#include 
++#include 
++#include 
++#define	 MIDWAY
++#define	 SL_LEPUS
++
++#include 
++#include 
++#include 
++
++#ifndef RXTOE_DEBUG
++#define RXTOE_DEBUG
++#endif
++#undef RXTOE_DEBUG
++
++/*----------------------------------------------------------------------
++* Definition
++*----------------------------------------------------------------------*/
++#define	hash_printf				printk
++
++#define HASH_TIMER_PERIOD		(60*HZ)	// seconds
++#define HASH_ILLEGAL_INDEX		0xffff
++
++/*----------------------------------------------------------------------
++* Variables
++*----------------------------------------------------------------------*/
++u32					hash_activate_bits[HASH_TOTAL_ENTRIES/32];
++u32					hash_nat_owner_bits[HASH_TOTAL_ENTRIES/32];
++char 				hash_tables[HASH_TOTAL_ENTRIES][HASH_MAX_BYTES] __attribute__ ((aligned(16)));
++static struct timer_list hash_timer_obj;
++LIST_HEAD(hash_timeout_list);
++
++/*----------------------------------------------------------------------
++* Functions
++*----------------------------------------------------------------------*/
++void dm_long(u32 location, int length);
++static void hash_timer_func(u32 data);
++
++/*----------------------------------------------------------------------
++* hash_init
++*----------------------------------------------------------------------*/
++void hash_init(void)
++{
++	int i;
++	volatile u32 *dp1, *dp2, dword;
++
++	dp1 = (volatile u32 *) TOE_V_BIT_BASE;
++	dp2 = (volatile u32 *) TOE_A_BIT_BASE;
++
++	for (i=0; iindex, 1);
++//	printk("Dump hash key!\n");
++//	dump_hash_key(entry);
++	return entry->index;
++}
++
++/*----------------------------------------------------------------------
++* hash_set_valid_flag
++*----------------------------------------------------------------------*/
++void hash_set_valid_flag(int index, int valid)
++{
++	register u32 reg32;
++
++	reg32 = TOE_V_BIT_BASE + (index/32) * 4;
++
++	if (valid)
++	{
++		writel(readl(reg32) | (1 << (index%32)), reg32);
++	}
++	else
++	{
++		writel(readl(reg32) & ~(1 << (index%32)), reg32);
++	}
++}
++
++/*----------------------------------------------------------------------
++* hash_set_nat_owner_flag
++*----------------------------------------------------------------------*/
++void hash_set_nat_owner_flag(int index, int valid)
++{
++	if (valid)
++	{
++		hash_nat_owner_bits[index/32] |= (1 << (index % 32));
++	}
++	else
++	{
++		hash_nat_owner_bits[index/32] &= ~(1 << (index % 32));
++	}
++}
++
++
++/*----------------------------------------------------------------------
++* hash_build_keys
++*----------------------------------------------------------------------*/
++int hash_build_keys(u32 *destp, HASH_ENTRY_T *entry)
++{
++	u32 	data;
++	unsigned char 	*cp;
++	int				i, j;
++	unsigned short 	index;
++	int 			total;
++
++	memset((void *)destp, 0, HASH_MAX_BYTES);
++	cp = (unsigned char *)destp;
++
++	if (entry->key_present.port || entry->key_present.Ethertype)
++	{
++		HASH_PUSH_WORD(cp, entry->key.Ethertype);		// word 0
++		HASH_PUSH_BYTE(cp, entry->key.port);			// Byte 2
++		HASH_PUSH_BYTE(cp, 0);							// Byte 3
++	}
++	else
++	{
++		HASH_PUSH_DWORD(cp, 0);
++	}
++
++	if (entry->key_present.da || entry->key_present.sa)
++	{
++		unsigned char mac[4];
++		if (entry->key_present.da)
++		{
++			for (i=0; i<4; i++)
++				HASH_PUSH_BYTE(cp, entry->key.da[i]);
++		}
++		mac[0] = (entry->key_present.da) ? entry->key.da[4] : 0;
++		mac[1] = (entry->key_present.da) ? entry->key.da[5] : 0;
++		mac[2] = (entry->key_present.sa) ? entry->key.sa[0] : 0;
++		mac[3] = (entry->key_present.sa) ? entry->key.sa[1] : 0;
++		data = mac[0] + (mac[1]<<8) + (mac[2]<<16) + (mac[3]<<24);
++		HASH_PUSH_DWORD(cp, data);
++		if (entry->key_present.sa)
++		{
++			for (i=2; i<6; i++)
++				HASH_PUSH_BYTE(cp, entry->key.sa[i]);
++		}
++	}
++
++	if (entry->key_present.pppoe_sid || entry->key_present.vlan_id)
++	{
++		HASH_PUSH_WORD(cp, entry->key.vlan_id);		// low word
++		HASH_PUSH_WORD(cp, entry->key.pppoe_sid);	// high word
++	}
++	if (entry->key_present.ipv4_hdrlen || entry->key_present.ip_tos || entry->key_present.ip_protocol)
++	{
++		HASH_PUSH_BYTE(cp, entry->key.ip_protocol);		// Byte 0
++		HASH_PUSH_BYTE(cp, entry->key.ip_tos);			// Byte 1
++		HASH_PUSH_BYTE(cp, entry->key.ipv4_hdrlen);		// Byte 2
++		HASH_PUSH_BYTE(cp, 0);							// Byte 3
++	}
++
++	if (entry->key_present.ipv6_flow_label)
++	{
++		HASH_PUSH_DWORD(cp, entry->key.ipv6_flow_label);	// low word
++	}
++	if (entry->key_present.sip)
++	{
++		// input (entry->key.sip[i]) is network-oriented
++		// output (hash key) is host-oriented
++		for (i=3; i>=0; i--)
++			HASH_PUSH_BYTE(cp, entry->key.sip[i]);
++		if (entry->key.ipv6)
++		{
++			for (i=4; i<16; i+=4)
++			{
++				for (j=i+3; j>=i; j--)
++					HASH_PUSH_BYTE(cp, entry->key.sip[j]);
++			}
++		}
++	}
++	if (entry->key_present.dip)
++	{
++		// input (entry->key.sip[i]) is network-oriented
++		// output (hash key) is host-oriented
++		for (i=3; i>=0; i--)
++			HASH_PUSH_BYTE(cp, entry->key.dip[i]);
++		if (entry->key.ipv6)
++		{
++			for (i=4; i<16; i+=4)
++			{
++				for (j=i+3; j>=i; j--)
++					HASH_PUSH_BYTE(cp, entry->key.dip[j]);
++			}
++		}
++	}
++
++	if (entry->key_present.l4_bytes_0_3)
++	{
++		HASH_PUSH_BYTE(cp, entry->key.l4_bytes[0]);
++		HASH_PUSH_BYTE(cp, entry->key.l4_bytes[1]);
++		HASH_PUSH_BYTE(cp, entry->key.l4_bytes[2]);
++		HASH_PUSH_BYTE(cp, entry->key.l4_bytes[3]);
++	}
++	if (entry->key_present.l4_bytes_4_7)
++	{
++		HASH_PUSH_BYTE(cp, entry->key.l4_bytes[4]);
++		HASH_PUSH_BYTE(cp, entry->key.l4_bytes[5]);
++		HASH_PUSH_BYTE(cp, entry->key.l4_bytes[6]);
++		HASH_PUSH_BYTE(cp, entry->key.l4_bytes[7]);
++	}
++	if (entry->key_present.l4_bytes_8_11)
++	{
++		HASH_PUSH_BYTE(cp, entry->key.l4_bytes[8]);
++		HASH_PUSH_BYTE(cp, entry->key.l4_bytes[9]);
++		HASH_PUSH_BYTE(cp, entry->key.l4_bytes[10]);
++		HASH_PUSH_BYTE(cp, entry->key.l4_bytes[11]);
++	}
++	if (entry->key_present.l4_bytes_12_15)
++	{
++		HASH_PUSH_BYTE(cp, entry->key.l4_bytes[12]);
++		HASH_PUSH_BYTE(cp, entry->key.l4_bytes[13]);
++		HASH_PUSH_BYTE(cp, entry->key.l4_bytes[14]);
++		HASH_PUSH_BYTE(cp, entry->key.l4_bytes[15]);
++	}
++	if (entry->key_present.l4_bytes_16_19)
++	{
++		HASH_PUSH_BYTE(cp, entry->key.l4_bytes[16]);
++		HASH_PUSH_BYTE(cp, entry->key.l4_bytes[17]);
++		HASH_PUSH_BYTE(cp, entry->key.l4_bytes[18]);
++		HASH_PUSH_BYTE(cp, entry->key.l4_bytes[19]);
++	}
++	if (entry->key_present.l4_bytes_20_23)
++	{
++		HASH_PUSH_BYTE(cp, entry->key.l4_bytes[20]);
++		HASH_PUSH_BYTE(cp, entry->key.l4_bytes[21]);
++		HASH_PUSH_BYTE(cp, entry->key.l4_bytes[22]);
++		HASH_PUSH_BYTE(cp, entry->key.l4_bytes[23]);
++	}
++	if (entry->key_present.l7_bytes_0_3)
++	{
++		HASH_PUSH_BYTE(cp, entry->key.l7_bytes[0]);
++		HASH_PUSH_BYTE(cp, entry->key.l7_bytes[1]);
++		HASH_PUSH_BYTE(cp, entry->key.l7_bytes[2]);
++		HASH_PUSH_BYTE(cp, entry->key.l7_bytes[3]);
++	}
++	if (entry->key_present.l7_bytes_4_7)
++	{
++		HASH_PUSH_BYTE(cp, entry->key.l7_bytes[4]);
++		HASH_PUSH_BYTE(cp, entry->key.l7_bytes[5]);
++		HASH_PUSH_BYTE(cp, entry->key.l7_bytes[6]);
++		HASH_PUSH_BYTE(cp, entry->key.l7_bytes[7]);
++	}
++	if (entry->key_present.l7_bytes_8_11)
++	{
++		HASH_PUSH_BYTE(cp, entry->key.l7_bytes[8]);
++		HASH_PUSH_BYTE(cp, entry->key.l7_bytes[9]);
++		HASH_PUSH_BYTE(cp, entry->key.l7_bytes[10]);
++		HASH_PUSH_BYTE(cp, entry->key.l7_bytes[11]);
++	}
++	if (entry->key_present.l7_bytes_12_15)
++	{
++		HASH_PUSH_BYTE(cp, entry->key.l7_bytes[12]);
++		HASH_PUSH_BYTE(cp, entry->key.l7_bytes[13]);
++		HASH_PUSH_BYTE(cp, entry->key.l7_bytes[14]);
++		HASH_PUSH_BYTE(cp, entry->key.l7_bytes[15]);
++	}
++	if (entry->key_present.l7_bytes_16_19)
++	{
++		HASH_PUSH_BYTE(cp, entry->key.l7_bytes[16]);
++		HASH_PUSH_BYTE(cp, entry->key.l7_bytes[17]);
++		HASH_PUSH_BYTE(cp, entry->key.l7_bytes[18]);
++		HASH_PUSH_BYTE(cp, entry->key.l7_bytes[19]);
++	}
++	if (entry->key_present.l7_bytes_20_23)
++	{
++		HASH_PUSH_BYTE(cp, entry->key.l7_bytes[20]);
++		HASH_PUSH_BYTE(cp, entry->key.l7_bytes[21]);
++		HASH_PUSH_BYTE(cp, entry->key.l7_bytes[22]);
++		HASH_PUSH_BYTE(cp, entry->key.l7_bytes[23]);
++	}
++
++	// get hash index
++	total = (u32)((u32)cp - (u32)destp) / (sizeof(u32));
++
++	if (total > HASH_MAX_KEY_DWORD)
++	{
++		//hash_printf("Total key words (%d) is too large (> %d)!\n",
++		//				total, HASH_MAX_KEY_DWORD);
++		return -1;
++	}
++
++	if (entry->key_present.port || entry->key_present.Ethertype)
++		index = hash_gen_crc16((unsigned char *)destp, total * 4);
++	else
++	{
++		if (total == 1)
++		{
++			hash_printf("No key is assigned!\n");
++			return -1;
++		}
++
++		index = hash_gen_crc16((unsigned char *)(destp+1), (total-1) * 4);
++	}
++
++	entry->index = index & HASH_BITS_MASK;
++
++	//hash_printf("Total key words = %d, Hash Index= %d\n",
++	//				total, entry->index);
++
++	cp = (unsigned char *)destp;
++	cp+=3;
++	HASH_PUSH_BYTE(cp, entry->rule);	// rule
++
++	entry->total_dwords = total;
++
++	return total;
++}
++
++/*----------------------------------------------------------------------
++* hash_build_nat_keys
++*----------------------------------------------------------------------*/
++void hash_build_nat_keys(u32 *destp, HASH_ENTRY_T *entry)
++{
++	unsigned char 	*cp;
++	int				i;
++	unsigned short 	index;
++	int 			total;
++
++	memset((void *)destp, 0, HASH_MAX_BYTES);
++
++	cp = (unsigned char *)destp + 2;
++	HASH_PUSH_BYTE(cp, entry->key.port);
++	cp++;
++
++	if (entry->key_present.pppoe_sid || entry->key_present.vlan_id)
++	{
++		HASH_PUSH_WORD(cp, entry->key.vlan_id);		// low word
++		HASH_PUSH_WORD(cp, entry->key.pppoe_sid);	// high word
++	}
++
++	HASH_PUSH_BYTE(cp, entry->key.ip_protocol);
++	cp+=3;
++
++	// input (entry->key.sip[i]) is network-oriented
++	// output (hash key) is host-oriented
++	for (i=3; i>=0; i--)
++		HASH_PUSH_BYTE(cp, entry->key.sip[i]);
++
++	// input (entry->key.sip[i]) is network-oriented
++	// output (hash key) is host-oriented
++	for (i=3; i>=0; i--)
++		HASH_PUSH_BYTE(cp, entry->key.dip[i]);
++
++	HASH_PUSH_BYTE(cp, entry->key.l4_bytes[0]);
++	HASH_PUSH_BYTE(cp, entry->key.l4_bytes[1]);
++	HASH_PUSH_BYTE(cp, entry->key.l4_bytes[2]);
++	HASH_PUSH_BYTE(cp, entry->key.l4_bytes[3]);
++
++	// get hash index
++	total = (u32)((u32)cp - (u32)destp) / (sizeof(u32));
++
++	index = hash_gen_crc16((unsigned char *)destp, total * 4);
++	entry->index = index & ((1 << HASH_BITS) - 1);
++
++	cp = (unsigned char *)destp;
++	cp+=3;
++	HASH_PUSH_BYTE(cp, entry->rule);	// rule
++
++	entry->total_dwords = total;
++}
++
++
++/*----------------------------------------------------------------------
++* hash_write_entry
++*----------------------------------------------------------------------*/
++int hash_write_entry(HASH_ENTRY_T *entry, unsigned char *key)
++{
++	int		i;
++	u32		*srcep, *destp, *destp2;
++
++	srcep = (u32 *)key;
++	destp2 = destp = (u32 *)&hash_tables[entry->index][0];
++
++	for (i=0; i<(entry->total_dwords); i++, srcep++, destp++)
++		*destp = *srcep;
++
++	srcep = (u32 *)&entry->action;
++	*destp++ = *srcep;
++
++	srcep = (u32 *)&entry->param;
++	for (i=0; i<(sizeof(ENTRY_PARAM_T)/sizeof(*destp)); i++, srcep++, destp++)
++		*destp = *srcep;
++
++	memset(destp, 0, (HASH_MAX_DWORDS-entry->total_dwords-HASH_ACTION_DWORDS) * sizeof(u32));
++
++	consistent_sync(destp2, (entry->total_dwords+HASH_ACTION_DWORDS) * 4, PCI_DMA_TODEVICE);
++	return 0;
++}
++
++/*----------------------------------------------------------------------
++* hash_timer_func
++*----------------------------------------------------------------------*/
++static void hash_timer_func(u32 data)
++{
++	int				i, j;
++	volatile u32	*active_p, *own_p, *valid_p;
++	u32				a_bits, own_bits;
++
++	valid_p = (volatile u32 *)TOE_V_BIT_BASE;
++	active_p = (volatile u32 *)hash_activate_bits;
++	own_p = (volatile u32 *)hash_nat_owner_bits;
++	for (i=0; i<(HASH_TOTAL_ENTRIES/32); i++, own_p++, active_p++, valid_p++)
++	{
++		*active_p |= readl(TOE_A_BIT_BASE + (i*4));
++		a_bits = *active_p;
++		own_bits = *own_p;
++		if (own_bits)
++		{
++#ifndef DEBUG_NAT_MIXED_HW_SW_TX
++			a_bits = own_bits & ~a_bits;
++#else
++			a_bits = own_bits & a_bits;
++#endif
++			for (j=0; a_bits && j<32; j++)
++			{
++				if (a_bits & 1)
++				{
++					*valid_p &= ~(1 << j);		// invalidate it
++#if !(defined(NAT_DEBUG_LAN_HASH_TIMEOUT) || defined(NAT_DEBUG_WAN_HASH_TIMEOUT))
++					*own_p &= ~(1 << j);		// release ownership for NAT
++#endif
++// #ifdef DEBUG_NAT_MIXED_HW_SW_TX
++#if 0
++					hash_printf("%lu %s: Clear hash index: %d\n", jiffies/HZ, __func__, i*32+j);
++#endif
++				}
++				a_bits >>= 1;
++			}
++			*active_p &= ~own_bits;		// deactivate it for next polling
++		}
++	}
++
++	hash_timer_obj.expires = jiffies + HASH_TIMER_PERIOD;
++	add_timer((struct timer_list *)data);
++}
++
++/*----------------------------------------------------------------------
++* dm_long
++*----------------------------------------------------------------------*/
++void dm_long(u32 location, int length)
++{
++	u32		*start_p, *curr_p, *end_p;
++	u32		*datap, data;
++	int		i;
++
++	//if (length > 1024)
++	//	length = 1024;
++
++	start_p = (u32 *)location;
++	end_p = (u32 *)location + length;
++	curr_p = (u32 *)((u32)location & 0xfffffff0);
++	datap = (u32 *)location;
++	while (curr_p < end_p)
++	{
++		hash_printf("0x%08x: ",(u32)curr_p & 0xfffffff0);
++		for (i=0; i<4; i++)
++		{
++			if (curr_p < start_p || curr_p >= end_p)
++               hash_printf("         ");
++			else
++			{
++				data = *datap;
++				hash_printf("%08X ", data);
++			}
++			if (i==1)
++              hash_printf("- ");
++
++			curr_p++;
++			datap++;
++		}
++        hash_printf("\n");
++	}
++}
++
++/*----------------------------------------------------------------------
++* hash_dump_entry
++*----------------------------------------------------------------------*/
++void hash_dump_entry(int index)
++{
++	hash_printf("Hash Index %d:\n", index);
++	dm_long((u32)&hash_tables[index][0], HASH_MAX_DWORDS);
++}
++
++
+--- /dev/null
++++ b/drivers/net/sl_switch.c
+@@ -0,0 +1,650 @@
++#include 
++#include 
++#include 
++#include 
++#include 
++#include 
++#include 
++
++#define GMAC_GLOBAL_BASE_ADDR       (IO_ADDRESS(SL2312_GLOBAL_BASE))
++#define GPIO_BASE_ADDR1  (IO_ADDRESS(SL2312_GPIO_BASE1))
++enum GPIO_REG
++{
++    GPIO_DATA_OUT   = 0x00,
++    GPIO_DATA_IN    = 0x04,
++    GPIO_PIN_DIR    = 0x08,
++    GPIO_BY_PASS    = 0x0c,
++    GPIO_DATA_SET   = 0x10,
++    GPIO_DATA_CLEAR = 0x14,
++};
++
++#define GMAC_SPEED_10			0
++#define GMAC_SPEED_100			1
++#define GMAC_SPEED_1000			2
++
++enum phy_state
++{
++    LINK_DOWN   = 0,
++    LINK_UP     = 1
++};
++
++#ifndef BIT
++#define BIT(x)						(1 << (x))
++#endif
++
++//int Get_Set_port_status();
++unsigned int SPI_read_bit(void);
++void SPI_write_bit(char bit_EEDO);
++void SPI_write(unsigned char block,unsigned char subblock,unsigned char addr,unsigned int value);
++unsigned int SPI_read(unsigned char block,unsigned char subblock,unsigned char addr);
++int SPI_default(void);
++void SPI_CS_enable(unsigned char enable);
++unsigned int SPI_get_identifier(void);
++void phy_write(unsigned char port_no,unsigned char reg,unsigned int val);
++unsigned int phy_read(unsigned char port_no,unsigned char reg);
++void phy_write_masked(unsigned char port_no,unsigned char reg,unsigned int val,unsigned int mask);
++void init_seq_7385(unsigned char port_no) ;
++void phy_receiver_init (unsigned char port_no);
++
++#define PORT_NO		4
++int switch_pre_speed[PORT_NO]={0,0,0,0};
++int switch_pre_link[PORT_NO]={0,0,0,0};
++
++
++
++
++
++/*				NOTES
++ *   The Protocol of the SPI are as follows:
++ *
++ *     		   Bit7 Bit6 Bit5 Bit4 Bit3 Bit2 Bit1 Bit0
++ *	byte0     |   Block id  | r/w | sub-block        |
++ *	byte1     |		Address			 |
++ *	byte2	  |		Data			 |
++ *	byte3	  |		Data			 |
++ *	byte4	  |		Data			 |
++ *	byte5	  |		Data			 |
++ */
++
++
++
++
++/***************************************/
++/* define GPIO module base address     */
++/***************************************/
++#define GPIO_EECS	     0x80000000		/*   EECS: GPIO[22]   */
++#define GPIO_MOSI	     0x20000000         /*   EEDO: GPIO[29]   send to 6996*/
++#define GPIO_MISO	     0x40000000         /*   EEDI: GPIO[30]   receive from 6996*/
++#define GPIO_EECK	     0x10000000         /*   EECK: GPIO[31]   */
++
++/*************************************************************
++* SPI protocol for ADM6996 control
++**************************************************************/
++#define SPI_OP_LEN	     0x08		// the length of start bit and opcode
++#define SPI_OPWRITE	     0X05		// write
++#define SPI_OPREAD	     0X06		// read
++#define SPI_OPERASE	     0X07		// erase
++#define SPI_OPWTEN	     0X04		// write enable
++#define SPI_OPWTDIS	     0X04		// write disable
++#define SPI_OPERSALL	     0X04		// erase all
++#define SPI_OPWTALL	     0X04		// write all
++
++#define SPI_ADD_LEN	     8			// bits of Address
++#define SPI_DAT_LEN	     32			// bits of Data
++
++
++/****************************************/
++/*	Function Declare		*/
++/****************************************/
++
++//unsigned int SPI_read_bit(void);
++//void SPI_write_bit(char bit_EEDO);
++//unsigned int SPI_read_bit(void);
++/******************************************
++* SPI_write
++* addr -> Write Address
++* value -> value to be write
++***************************************** */
++void phy_receiver_init (unsigned char port_no)
++{
++    phy_write(port_no,31,0x2a30);
++    phy_write_masked(port_no, 12, 0x0200, 0x0300);
++    phy_write(port_no,31,0);
++}
++
++void phy_write(unsigned char port_no,unsigned char reg,unsigned int val)
++{
++	unsigned int cmd;
++
++	cmd = (port_no<<21)|(reg<<16)|val;
++	SPI_write(3,0,1,cmd);
++}
++
++unsigned int phy_read(unsigned char port_no,unsigned char reg)
++{
++	unsigned int cmd,reg_val;
++
++	cmd = BIT(26)|(port_no<<21)|(reg<<16);
++	SPI_write(3,0,1,cmd);
++	msleep(2);
++	reg_val = SPI_read(3,0,2);
++	return reg_val;
++}
++
++void phy_write_masked(unsigned char port_no,unsigned char reg,unsigned int val,unsigned int mask)
++{
++	unsigned int cmd,reg_val;
++
++	cmd = BIT(26)|(port_no<<21)|(reg<<16);	// Read reg_val
++	SPI_write(3,0,1,cmd);
++	mdelay(2);
++	reg_val = SPI_read(3,0,2);
++	reg_val &= ~mask;			// Clear masked bit
++	reg_val |= (val&mask) ;			// set masked bit ,if true
++	cmd = (port_no<<21)|(reg<<16)|reg_val;
++	SPI_write(3,0,1,cmd);
++}
++
++void init_seq_7385(unsigned char port_no)
++{
++	unsigned char rev;
++
++	phy_write(port_no, 31, 0x2a30);
++	phy_write_masked(port_no, 8, 0x0200, 0x0200);
++	phy_write(port_no, 31, 0x52b5);
++	phy_write(port_no, 16, 0xb68a);
++	phy_write_masked(port_no, 18, 0x0003, 0xff07);
++	phy_write_masked(port_no, 17, 0x00a2, 0x00ff);
++	phy_write(port_no, 16, 0x968a);
++	phy_write(port_no, 31, 0x2a30);
++	phy_write_masked(port_no, 8, 0x0000, 0x0200);
++	phy_write(port_no, 31, 0x0000); /* Read revision */
++	rev = phy_read(port_no, 3) & 0x000f;
++	if (rev == 0)
++	{
++		phy_write(port_no, 31, 0x2a30);
++		phy_write_masked(port_no, 8, 0x0200, 0x0200);
++		phy_write(port_no, 31, 0x52b5);
++		phy_write(port_no, 18, 0x0000);
++		phy_write(port_no, 17, 0x0689);
++		phy_write(port_no, 16, 0x8f92);
++		phy_write(port_no, 31, 0x52B5);
++		phy_write(port_no, 18, 0x0000);
++		phy_write(port_no, 17, 0x0E35);
++		phy_write(port_no, 16, 0x9786);
++		phy_write(port_no, 31, 0x2a30);
++		phy_write_masked(port_no, 8, 0x0000, 0x0200);
++		phy_write(port_no, 23, 0xFF80);
++		phy_write(port_no, 23, 0x0000);
++	}
++	phy_write(port_no, 31, 0x0000);
++	phy_write(port_no, 18, 0x0048);
++	if (rev == 0)
++	{
++		phy_write(port_no, 31, 0x2a30);
++		phy_write(port_no, 20, 0x6600);
++		phy_write(port_no, 31, 0x0000);
++		phy_write(port_no, 24, 0xa24e);
++	}
++	else
++	{
++		phy_write(port_no, 31, 0x2a30);
++		phy_write_masked(port_no, 22, 0x0240, 0x0fc0);
++		phy_write_masked(port_no, 20, 0x4000, 0x6000);
++		phy_write(port_no, 31, 1);
++		phy_write_masked(port_no, 20, 0x6000, 0xe000);
++		phy_write(port_no, 31, 0x0000);
++	}
++}
++
++int Get_Set_port_status()
++{
++	unsigned int    reg_val,ability,rcv_mask,mac_config;
++	int is_link=0;
++	int i;
++
++ 	rcv_mask = SPI_read(2,0,0x10);			// Receive mask
++
++	for(i=0;i<4;i++){
++		reg_val = phy_read(i,1);
++		if ((reg_val & 0x0024) == 0x0024) /* link is established and auto_negotiate process completed */
++		{
++			is_link=1;
++			if(switch_pre_link[i]==LINK_DOWN){		// Link Down ==> Link up
++
++				rcv_mask |= BIT(i);			// Enable receive
++
++				reg_val = phy_read(i,10);
++				if(reg_val & 0x0c00){
++					printk("Port%d:Giga mode\n",i);
++//					SPI_write(1,i,0x00,0x300701B1);
++					mac_config = 0x00060004|(6<<6);
++
++					SPI_write(1,i,0x00,((mac_config & 0xfffffff8) | 1) | 0x20000030);	// reset port
++					mac_config |= (( BIT(i) << 19) | 0x08000000);
++					SPI_write(1,i,0x00,mac_config);
++					SPI_write(1,i,0x04,0x000300ff);		// flow control
++
++					reg_val = SPI_read(5,0,0x12);
++					reg_val &= ~BIT(i);
++					SPI_write(5,0,0x12,reg_val);
++
++					reg_val = SPI_read(1,i,0x00);
++					reg_val |= 0x10010000;
++					SPI_write(1,i,0x00,reg_val);
++//					SPI_write(1,i,0x00,0x10070181);
++					switch_pre_link[i]=LINK_UP;
++					switch_pre_speed[i]=GMAC_SPEED_1000;
++				}
++				else{
++					reg_val = phy_read(i,5);
++					ability = (reg_val&0x5e0) >>5;
++					if ((ability & 0x0C)) /* 100M */
++					{
++//						SPI_write(1,i,0x00,0x30050472);
++						if((ability&0x08)==0) 		// Half
++							mac_config = 0x00040004 |(17<<6);
++						else				// Full
++							mac_config = 0x00040004 |(17<<6);
++
++						SPI_write(1,i,0x00,((mac_config & 0xfffffff8) | 1) | 0x20000030);	// reset port
++						mac_config |= (( BIT(i) << 19) | 0x08000000);
++						SPI_write(1,i,0x00,mac_config);
++						SPI_write(1,i,0x04,0x000300ff);		// flow control
++
++						reg_val = SPI_read(5,0,0x12);
++						reg_val &= ~BIT(i);
++						SPI_write(5,0,0x12,reg_val);
++
++						reg_val = SPI_read(1,i,0x00);
++						reg_val &= ~0x08000000;
++						reg_val |= 0x10010000;
++						SPI_write(1,i,0x00,reg_val);
++//						SPI_write(1,i,0x00,0x10050442);
++						printk("Port%d:100M\n",i);
++						switch_pre_link[i]=LINK_UP;
++						switch_pre_speed[i]=GMAC_SPEED_100;
++					}
++					else if((ability & 0x03)) /* 10M */
++					{
++//						SPI_write(1,i,0x00,0x30050473);
++						if((ability&0x2)==0)		// Half
++							mac_config = 0x00040004 |(17<<6);
++						else				// Full
++							mac_config = 0x00040004 |(17<<6);
++
++						SPI_write(1,i,0x00,((mac_config & 0xfffffff8) | 1) | 0x20000030);	// reset port
++						mac_config |= (( BIT(i) << 19) | 0x08000000);
++						SPI_write(1,i,0x00,mac_config);
++						SPI_write(1,i,0x04,0x000300ff);		// flow control
++
++						reg_val = SPI_read(5,0,0x12);
++						reg_val &= ~BIT(i);
++						SPI_write(5,0,0x12,reg_val);
++
++						reg_val = SPI_read(1,i,0x00);
++						reg_val &= ~0x08000000;
++						reg_val |= 0x10010000;
++						SPI_write(1,i,0x00,reg_val);
++//						SPI_write(1,i,0x00,0x10050443);
++						printk("Port%d:10M\n",i);
++						switch_pre_link[i]=LINK_UP;
++						switch_pre_speed[i]=GMAC_SPEED_10;
++					}
++					else{
++						SPI_write(1,i,0x00,0x20000030);
++						printk("Port%d:Unknown mode\n",i);
++						switch_pre_link[i]=LINK_DOWN;
++						switch_pre_speed[i]=GMAC_SPEED_10;
++					}
++				}
++			}
++			else{						// Link up ==> Link UP
++
++			}
++		}
++		else{							// Link Down
++			if(switch_pre_link[i]==LINK_UP){
++				printk("Port%d:Link Down\n",i);
++				//phy_receiver_init(i);
++				reg_val = SPI_read(1,i,0);
++				reg_val &= ~BIT(16);
++				SPI_write(1,i,0x00,reg_val);			// disable RX
++				SPI_write(5,0,0x0E,BIT(i));			// dicard packet
++				while((SPI_read(5,0,0x0C)&BIT(i))==0)		// wait to be empty
++					msleep(1);
++				SPI_write(1,i,0x00,0x20000030);			// PORT_RST
++				SPI_write(5,0,0x0E,SPI_read(5,0,0x0E) & ~BIT(i));// accept packet
++
++				reg_val = SPI_read(5,0,0x12);
++				reg_val |= BIT(i);
++				SPI_write(5,0,0x12,reg_val);
++			}
++			switch_pre_link[i]=LINK_DOWN;
++			rcv_mask &= ~BIT(i);			// disable receive
++		}
++	}
++
++	SPI_write(2,0,0x10,rcv_mask);			// Receive mask
++	return is_link;
++
++}
++EXPORT_SYMBOL(Get_Set_port_status);
++
++void SPI_write(unsigned char block,unsigned char subblock,unsigned char addr,unsigned int value)
++{
++	int     i;
++	char    bit;
++	unsigned int data;
++
++	SPI_CS_enable(1);
++
++	data = (block<<5) | 0x10 | subblock;
++
++	//send write command
++	for(i=SPI_OP_LEN-1;i>=0;i--)
++	{
++		bit = (data>>i)& 0x01;
++		SPI_write_bit(bit);
++	}
++
++	// send 8 bits address (MSB first, LSB last)
++	for(i=SPI_ADD_LEN-1;i>=0;i--)
++	{
++		bit = (addr>>i)& 0x01;
++		SPI_write_bit(bit);
++	}
++	// send 32 bits data (MSB first, LSB last)
++	for(i=SPI_DAT_LEN-1;i>=0;i--)
++	{
++		bit = (value>>i)& 0x01;
++		SPI_write_bit(bit);
++	}
++
++	SPI_CS_enable(0);	// CS low
++
++}
++
++
++/************************************
++* SPI_write_bit
++* bit_EEDO -> 1 or 0 to be written
++************************************/
++void SPI_write_bit(char bit_EEDO)
++{
++	unsigned int addr;
++	unsigned int value;
++
++	addr = (GPIO_BASE_ADDR1 + GPIO_PIN_DIR);
++	value = readl(addr) |GPIO_EECK |GPIO_MOSI ;   /* set EECK/MISO Pin to output */
++	writel(value,addr);
++	if(bit_EEDO)
++	{
++		addr = (GPIO_BASE_ADDR1 + GPIO_DATA_SET);
++		writel(GPIO_MOSI,addr); /* set MISO to 1 */
++
++	}
++	else
++	{
++		addr = (GPIO_BASE_ADDR1 + GPIO_DATA_CLEAR);
++		writel(GPIO_MOSI,addr); /* set MISO to 0 */
++	}
++	addr = (GPIO_BASE_ADDR1 + GPIO_DATA_SET);
++	writel(GPIO_EECK,addr); /* set EECK to 1 */
++	addr = (GPIO_BASE_ADDR1 + GPIO_DATA_CLEAR);
++	writel(GPIO_EECK,addr); /* set EECK to 0 */
++
++	//return ;
++}
++
++/**********************************************************************
++* read a bit from ADM6996 register
++***********************************************************************/
++unsigned int SPI_read_bit(void) // read data from
++{
++	unsigned int addr;
++	unsigned int value;
++
++	addr = (GPIO_BASE_ADDR1 + GPIO_PIN_DIR);
++	value = readl(addr) & (~GPIO_MISO);   // set EECK to output and MISO to input
++	writel(value,addr);
++
++	addr =(GPIO_BASE_ADDR1 + GPIO_DATA_SET);
++	writel(GPIO_EECK,addr); // set EECK to 1
++
++
++	addr = (GPIO_BASE_ADDR1 + GPIO_DATA_IN);
++	value = readl(addr) ;
++
++	addr = (GPIO_BASE_ADDR1 + GPIO_DATA_CLEAR);
++	writel(GPIO_EECK,addr); // set EECK to 0
++
++
++	value = value >> 30;
++	return value ;
++}
++
++/******************************************
++* SPI_default
++* EEPROM content default value
++*******************************************/
++int SPI_default(void)
++{
++	int i;
++	unsigned reg_val,cmd;
++
++#if 0
++	SPI_write(7,0,0x1C,0x01);				// map code space to 0
++
++	reg_val = SPI_read(7,0,0x10);
++	reg_val |= 0x0146;
++	reg_val &= ~0x0001;
++	SPI_write(7,0,0x10,reg_val);				// reset iCPU and enable ext_access
++	SPI_write(7,0,0x11,0x0000);				// start address
++	for(i=0;i which table to be read: 1/count  0/EEPROM
++* addr  -> Address to be read
++* return : Value of the register
++*************************************************/
++unsigned int SPI_read(unsigned char block,unsigned char subblock,unsigned char addr)
++{
++	int     i;
++	char    bit;
++	unsigned int data,value=0;
++
++	SPI_CS_enable(1);
++
++	data = (block<<5) | subblock;
++
++	//send write command
++	for(i=SPI_OP_LEN-1;i>=0;i--)
++	{
++		bit = (data>>i)& 0x01;
++		SPI_write_bit(bit);
++	}
++
++	// send 8 bits address (MSB first, LSB last)
++	for(i=SPI_ADD_LEN-1;i>=0;i--)
++	{
++		bit = (addr>>i)& 0x01;
++		SPI_write_bit(bit);
++	}
++
++	// dummy read for chip ready
++	for(i=0;i<8;i++)
++		SPI_read_bit();
++
++
++	// read 32 bits data (MSB first, LSB last)
++	for(i=SPI_DAT_LEN-1;i>=0;i--)
++	{
++		bit = SPI_read_bit();
++		value |= bit<
++
++#define SL351x_GMAC_WORKAROUND		1
++
++#undef BIG_ENDIAN
++#define BIG_ENDIAN  				0
++#define GMAC_DEBUG      			1
++#define GMAC_NUM					2
++//#define	L2_jumbo_frame				1
++
++#define _PACKED_					__attribute__ ((aligned(1), packed))
++
++#ifndef BIT
++#define BIT(x)						(1 << (x))
++#endif
++
++#define REG32(addr)     			(*(volatile unsigned long  * const)(addr))
++
++#define DMA_MALLOC(size,handle)		pci_alloc_consistent(NULL,size,handle)
++#define DMA_MFREE(mem,size,handle)	pci_free_consistent(NULL,size,mem,handle)
++
++// Define frame size
++#define ETHER_ADDR_LEN				6
++#define GMAC_MAX_ETH_FRAME_SIZE		1514
++#define GMAC_TX_BUF_SIZE			((GMAC_MAX_ETH_FRAME_SIZE + 31) & (~31))
++#define MAX_ISR_WORK        		20
++
++#ifdef	L2_jumbo_frame
++#define SW_RX_BUF_SIZE				9234	// 2048 ,9234
++#else
++#define SW_RX_BUF_SIZE				1536	// 2048
++#endif
++
++#define HW_RX_BUF_SIZE				1536	// 2048
++
++#define GMAC_DEV_TX_TIMEOUT  		(10*HZ)			//add by CH
++#define	SKB_RESERVE_BYTES			16
++
++/**********************************************************************
++ * Base Register
++ **********************************************************************/
++#define TOE_BASE					(IO_ADDRESS(SL2312_TOE_BASE))
++#define GMAC_GLOBAL_BASE_ADDR       (IO_ADDRESS(SL2312_GLOBAL_BASE))
++
++#define TOE_GLOBAL_BASE				(TOE_BASE + 0x0000)
++#define TOE_NONTOE_QUE_HDR_BASE		(TOE_BASE + 0x2000)
++#define TOE_TOE_QUE_HDR_BASE		(TOE_BASE + 0x3000)
++#define TOE_V_BIT_BASE				(TOE_BASE + 0x4000)
++#define TOE_A_BIT_BASE				(TOE_BASE + 0x6000)
++#define TOE_GMAC0_DMA_BASE			(TOE_BASE + 0x8000)
++#define TOE_GMAC0_BASE				(TOE_BASE + 0xA000)
++#define TOE_GMAC1_DMA_BASE			(TOE_BASE + 0xC000)
++#define TOE_GMAC1_BASE				(TOE_BASE + 0xE000)
++
++/**********************************************************************
++ * Queue ID
++ **********************************************************************/
++#define TOE_SW_FREE_QID				0x00
++#define TOE_HW_FREE_QID				0x01
++#define TOE_GMAC0_SW_TXQ0_QID		0x02
++#define TOE_GMAC0_SW_TXQ1_QID		0x03
++#define TOE_GMAC0_SW_TXQ2_QID		0x04
++#define TOE_GMAC0_SW_TXQ3_QID		0x05
++#define TOE_GMAC0_SW_TXQ4_QID		0x06
++#define TOE_GMAC0_SW_TXQ5_QID		0x07
++#define TOE_GMAC0_HW_TXQ0_QID		0x08
++#define TOE_GMAC0_HW_TXQ1_QID		0x09
++#define TOE_GMAC0_HW_TXQ2_QID		0x0A
++#define TOE_GMAC0_HW_TXQ3_QID		0x0B
++#define TOE_GMAC1_SW_TXQ0_QID		0x12
++#define TOE_GMAC1_SW_TXQ1_QID		0x13
++#define TOE_GMAC1_SW_TXQ2_QID		0x14
++#define TOE_GMAC1_SW_TXQ3_QID		0x15
++#define TOE_GMAC1_SW_TXQ4_QID		0x16
++#define TOE_GMAC1_SW_TXQ5_QID		0x17
++#define TOE_GMAC1_HW_TXQ0_QID		0x18
++#define TOE_GMAC1_HW_TXQ1_QID		0x19
++#define TOE_GMAC1_HW_TXQ2_QID		0x1A
++#define TOE_GMAC1_HW_TXQ3_QID		0x1B
++#define TOE_GMAC0_DEFAULT_QID		0x20
++#define TOE_GMAC1_DEFAULT_QID		0x21
++#define TOE_CLASSIFICATION_QID(x)	(0x22 + x)	// 0x22 ~ 0x2F
++#define TOE_TOE_QID(x)				(0x40 + x)	// 0x40 ~ 0x7F
++
++/**********************************************************************
++ * TOE DMA Queue Number should be 2^n, n = 6...12
++ * TOE DMA Queues are the following queue types:
++ *		SW Free Queue, HW Free Queue,
++ *		GMAC 0/1 SW TX Q0-5, and GMAC 0/1 HW TX Q0-5
++ * They have same descriptor numbers.
++ * The base address and descriptor number are configured at
++ * DMA Queues Descriptor Ring Base Address/Size Register (offset 0x0004)
++ **********************************************************************/
++#define TOE_SW_FREEQ_DESC_POWER		10
++#define TOE_SW_FREEQ_DESC_NUM		(1<y) ? x :y)
++#define TX_DESC_NUM					_max(TOE_GMAC0_SWTXQ_DESC_NUM, TOE_GMAC1_SWTXQ_DESC_NUM)
++
++#define RWPTR_ADVANCE_ONE(x, max)	((x == (max -1)) ? 0 : x+1)
++#define RWPTR_RECEDE_ONE(x, max)	((x == 0) ? (max -1) : x-1)
++#define SET_WPTR(addr, data)		(*(volatile u16 * const)((u32)(addr)+2) = (u16)data)
++#define SET_RPTR(addr, data)		(*(volatile u16 * const)((u32)(addr)) = (u16)data)
++
++/**********************************************************************
++ * Global registers
++ * #define TOE_GLOBAL_BASE			(TOE_BASE + 0x0000)
++ * Base 0x60000000
++ **********************************************************************/
++#define GLOBAL_TOE_VERSION_REG			0x0000
++#define GLOBAL_SW_FREEQ_BASE_SIZE_REG	0x0004
++#define GLOBAL_HW_FREEQ_BASE_SIZE_REG	0x0008
++#define GLOBAL_DMA_SKB_SIZE_REG			0x0010
++#define GLOBAL_SWFQ_RWPTR_REG			0x0014
++#define GLOBAL_HWFQ_RWPTR_REG			0x0018
++#define GLOBAL_INTERRUPT_STATUS_0_REG	0x0020
++#define GLOBAL_INTERRUPT_ENABLE_0_REG	0x0024
++#define GLOBAL_INTERRUPT_SELECT_0_REG	0x0028
++#define GLOBAL_INTERRUPT_STATUS_1_REG	0x0030
++#define GLOBAL_INTERRUPT_ENABLE_1_REG	0x0034
++#define GLOBAL_INTERRUPT_SELECT_1_REG	0x0038
++#define GLOBAL_INTERRUPT_STATUS_2_REG	0x0040
++#define GLOBAL_INTERRUPT_ENABLE_2_REG	0x0044
++#define GLOBAL_INTERRUPT_SELECT_2_REG	0x0048
++#define GLOBAL_INTERRUPT_STATUS_3_REG	0x0050
++#define GLOBAL_INTERRUPT_ENABLE_3_REG	0x0054
++#define GLOBAL_INTERRUPT_SELECT_3_REG	0x0058
++#define GLOBAL_INTERRUPT_STATUS_4_REG	0x0060
++#define GLOBAL_INTERRUPT_ENABLE_4_REG	0x0064
++#define GLOBAL_INTERRUPT_SELECT_4_REG	0x0068
++#define GLOBAL_HASH_TABLE_BASE_REG		0x006C
++#define GLOBAL_QUEUE_THRESHOLD_REG		0x0070
++
++/**********************************************************************
++ * GMAC 0/1 DMA/TOE register
++ * #define TOE_GMAC0_DMA_BASE		(TOE_BASE + 0x8000)
++ * #define TOE_GMAC1_DMA_BASE		(TOE_BASE + 0xC000)
++ * Base 0x60008000 or 0x6000C000
++ **********************************************************************/
++#define GMAC_DMA_CTRL_REG				0x0000
++#define GMAC_TX_WEIGHTING_CTRL_0_REG	0x0004
++#define GMAC_TX_WEIGHTING_CTRL_1_REG	0x0008
++#define GMAC_SW_TX_QUEUE0_PTR_REG		0x000C
++#define GMAC_SW_TX_QUEUE1_PTR_REG		0x0010
++#define GMAC_SW_TX_QUEUE2_PTR_REG		0x0014
++#define GMAC_SW_TX_QUEUE3_PTR_REG		0x0018
++#define GMAC_SW_TX_QUEUE4_PTR_REG		0x001C
++#define GMAC_SW_TX_QUEUE5_PTR_REG		0x0020
++#define GMAC_HW_TX_QUEUE0_PTR_REG		0x0024
++#define GMAC_HW_TX_QUEUE1_PTR_REG		0x0028
++#define GMAC_HW_TX_QUEUE2_PTR_REG		0x002C
++#define GMAC_HW_TX_QUEUE3_PTR_REG		0x0030
++#define GMAC_DMA_TX_FIRST_DESC_REG		0x0038
++#define GMAC_DMA_TX_CURR_DESC_REG		0x003C
++#define GMAC_DMA_TX_DESC_WORD0_REG		0x0040
++#define GMAC_DMA_TX_DESC_WORD1_REG		0x0044
++#define GMAC_DMA_TX_DESC_WORD2_REG		0x0048
++#define GMAC_DMA_TX_DESC_WORD3_REG		0x004C
++#define GMAC_SW_TX_QUEUE_BASE_REG		0x0050
++#define GMAC_HW_TX_QUEUE_BASE_REG		0x0054
++#define GMAC_DMA_RX_FIRST_DESC_REG		0x0058
++#define GMAC_DMA_RX_CURR_DESC_REG		0x005C
++#define GMAC_DMA_RX_DESC_WORD0_REG		0x0060
++#define GMAC_DMA_RX_DESC_WORD1_REG		0x0064
++#define GMAC_DMA_RX_DESC_WORD2_REG		0x0068
++#define GMAC_DMA_RX_DESC_WORD3_REG		0x006C
++#define GMAC_HASH_ENGINE_REG0			0x0070
++#define GMAC_HASH_ENGINE_REG1			0x0074
++#define GMAC_MR0CR0						0x0078 	// matching rule 0 Control register 0
++#define GMAC_MR0CR1						0x007C	// matching rule 0 Control register 1
++#define GMAC_MR0CR2						0x0080	// matching rule 0 Control register 2
++#define GMAC_MR1CR0						0x0084	// matching rule 1 Control register 0
++#define GMAC_MR1CR1						0x0088	// matching rule 1 Control register 1
++#define GMAC_MR1CR2						0x008C	// matching rule 1 Control register 2
++#define GMAC_MR2CR0						0x0090	// matching rule 2 Control register 0
++#define GMAC_MR2CR1						0x0094	// matching rule 2 Control register 1
++#define GMAC_MR2CR2						0x0098	// matching rule 2 Control register 2
++#define GMAC_MR3CR0						0x009C	// matching rule 3 Control register 0
++#define GMAC_MR3CR1						0x00A0	// matching rule 3 Control register 1
++#define GMAC_MR3CR2						0x00A4	// matching rule 3 Control register 2
++#define GMAC_SPR0						0x00A8	// Support Protocol Regsister 0
++#define GMAC_SPR1						0x00AC	// Support Protocol Regsister 1
++#define GMAC_SPR2						0x00B0	// Support Protocol Regsister 2
++#define GMAC_SPR3						0x00B4	// Support Protocol Regsister 3
++#define GMAC_SPR4						0x00B8	// Support Protocol Regsister 4
++#define GMAC_SPR5						0x00BC	// Support Protocol Regsister 5
++#define GMAC_SPR6						0x00C0	// Support Protocol Regsister 6
++#define GMAC_SPR7						0x00C4	// Support Protocol Regsister 7
++#define GMAC_AHB_WEIGHT_REG				0x00C8	// GMAC Hash/Rx/Tx AHB Weighting register
++
++/**********************************************************************
++ * TOE GMAC 0/1 register
++ * #define TOE_GMAC0_BASE				(TOE_BASE + 0xA000)
++ * #define TOE_GMAC1_BASE				(TOE_BASE + 0xE000)
++ * Base 0x6000A000 or 0x6000E000
++ **********************************************************************/
++enum GMAC_REGISTER {
++	GMAC_STA_ADD0 	= 0x0000,
++	GMAC_STA_ADD1	= 0x0004,
++	GMAC_STA_ADD2	= 0x0008,
++	GMAC_RX_FLTR	= 0x000c,
++	GMAC_MCAST_FIL0 = 0x0010,
++	GMAC_MCAST_FIL1 = 0x0014,
++	GMAC_CONFIG0	= 0x0018,
++	GMAC_CONFIG1	= 0x001c,
++	GMAC_CONFIG2	= 0x0020,
++	GMAC_CONFIG3	= 0x0024,
++	GMAC_RESERVED	= 0x0028,
++	GMAC_STATUS		= 0x002c,
++	GMAC_IN_DISCARDS= 0x0030,
++	GMAC_IN_ERRORS  = 0x0034,
++	GMAC_IN_MCAST   = 0x0038,
++	GMAC_IN_BCAST   = 0x003c,
++	GMAC_IN_MAC1    = 0x0040,	// for STA 1 MAC Address
++	GMAC_IN_MAC2    = 0x0044	// for STA 2 MAC Address
++};
++/**********************************************************************
++ * TOE version Register (offset 0x0000)
++ **********************************************************************/
++typedef union
++{
++	unsigned int bits32;
++	struct bit
++	{
++#if (BIG_ENDIAN==1)
++
++		unsigned int reserved		: 15;	// bit 31:17
++		unsigned int v_bit_mode		: 1;	// bit 16		1: 128-entry
++		unsigned int device_id		: 12;	// bit 15:4 	Device ID
++		unsigned int revision_id	: 4;	// bit  3:0 	Revision ID
++#else
++		unsigned int revision_id	: 4;	// bit  3:0 	Revision ID
++		unsigned int device_id		: 12;	// bit 15:4 	Device ID
++		unsigned int v_bit_mode		: 1;	// bit 16		1: 128-entry
++		unsigned int reserved		: 15;	// bit 31:17
++#endif
++	} bits;
++} TOE_VERSION_T;
++
++
++/**********************************************************************
++ * DMA Queues description Ring Base Address/Size Register (offset 0x0004)
++ **********************************************************************/
++typedef union
++{
++	unsigned int bits32;
++	unsigned int base_size;
++} DMA_Q_BASE_SIZE_T;
++#define DMA_Q_BASE_MASK 	(~0x0f)
++
++/**********************************************************************
++ * DMA SKB Buffer register (offset 0x0008)
++ **********************************************************************/
++typedef union
++{
++	unsigned int bits32;
++	struct bit_0008
++	{
++#if (BIG_ENDIAN==1)
++
++		unsigned int hw_skb_size	: 16;	// bit 31:16	HW Free poll SKB Size
++		unsigned int sw_skb_size	: 16;	// bit 15:0 	SW Free poll SKB Size
++#else
++		unsigned int sw_skb_size	: 16;	// bit 15:0 	SW Free poll SKB Size
++		unsigned int hw_skb_size	: 16;	// bit 31:16	HW Free poll SKB Size
++#endif
++	} bits;
++} DMA_SKB_SIZE_T;
++
++/**********************************************************************
++ * DMA SW Free Queue Read/Write Pointer Register (offset 0x000C)
++ **********************************************************************/
++typedef union
++{
++	unsigned int bits32;
++	struct bit_000c
++	{
++#if (BIG_ENDIAN==1)
++
++		unsigned int wptr			: 16;	// bit 31:16 	Write Ptr, RW
++		unsigned int rptr			: 16;	// bit 15:0		Read Ptr, RO
++#else
++		unsigned int rptr			: 16;	// bit 15:0		Read Ptr, RO
++		unsigned int wptr			: 16;	// bit 31:16 	Write Ptr, RW
++#endif
++	} bits;
++} DMA_RWPTR_T;
++
++/**********************************************************************
++ * DMA HW Free Queue Read/Write Pointer Register (offset 0x0010)
++ **********************************************************************/
++// see DMA_RWPTR_T structure
++
++/**********************************************************************
++ * Interrupt Status Register 0 	(offset 0x0020)
++ * Interrupt Mask Register 0 	(offset 0x0024)
++ * Interrupt Select Register 0 	(offset 0x0028)
++ **********************************************************************/
++typedef union
++{
++	unsigned int bits32;
++	struct bit_0020
++	{
++#if (BIG_ENDIAN==1)
++		unsigned int txDerr1		: 1;	// bit 31	GMAC1 AHB Bus Error while Tx
++		unsigned int txPerr1		: 1;	// bit 30	GMAC1 Tx Descriptor Protocol Error
++		unsigned int txDerr0		: 1;	// bit 29	GMAC0 AHB Bus Error while Tx
++		unsigned int txPerr0		: 1;	// bit 28	GMAC0 Tx Descriptor Protocol Error
++		unsigned int rxDerr1		: 1;	// bit 27	GMAC1 AHB Bus Error while Rx
++		unsigned int rxPerr1		: 1;	// bit 26	GMAC1 Rx Descriptor Protocol Error
++		unsigned int rxDerr0		: 1;	// bit 25	GMAC0 AHB Bus Error while Rx
++		unsigned int rxPerr0		: 1;	// bit 24	GMAC0 Rx Descriptor Protocol Error
++		unsigned int swtq15_fin		: 1;	// bit 23	GMAC1 SW Tx Queue 5 Finish Interrupt
++		unsigned int swtq14_fin		: 1;	// bit 22	GMAC1 SW Tx Queue 4 Finish Interrupt
++		unsigned int swtq13_fin		: 1;	// bit 21	GMAC1 SW Tx Queue 3 Finish Interrupt
++		unsigned int swtq12_fin		: 1;	// bit 20	GMAC1 SW Tx Queue 2 Finish Interrupt
++		unsigned int swtq11_fin		: 1;	// bit 19	GMAC1 SW Tx Queue 1 Finish Interrupt
++		unsigned int swtq10_fin		: 1;	// bit 18	GMAC1 SW Tx Queue 0 Finish Interrupt
++		unsigned int swtq05_fin		: 1;	// bit 17	GMAC0 SW Tx Queue 5 Finish Interrupt
++		unsigned int swtq04_fin		: 1;	// bit 16	GMAC0 SW Tx Queue 4 Finish Interrupt
++		unsigned int swtq03_fin		: 1;	// bit 15	GMAC0 SW Tx Queue 3 Finish Interrupt
++		unsigned int swtq02_fin		: 1;	// bit 14	GMAC0 SW Tx Queue 2 Finish Interrupt
++		unsigned int swtq01_fin		: 1;	// bit 13	GMAC0 SW Tx Queue 1 Finish Interrupt
++		unsigned int swtq00_fin		: 1;	// bit 12	GMAC0 SW Tx Queue 0 Finish Interrupt
++		unsigned int swtq15_eof		: 1;	// bit 11	GMAC1 SW Tx Queue 5 EOF Interrupt
++		unsigned int swtq14_eof		: 1;	// bit 10	GMAC1 SW Tx Queue 4 EOF Interrupt
++		unsigned int swtq13_eof		: 1;	// bit 9	GMAC1 SW Tx Queue 3 EOF Interrupt
++		unsigned int swtq12_eof		: 1;	// bit 8	GMAC1 SW Tx Queue 2 EOF Interrupt
++		unsigned int swtq11_eof		: 1;	// bit 7	GMAC1 SW Tx Queue 1 EOF Interrupt
++		unsigned int swtq10_eof		: 1;	// bit 6	GMAC1 SW Tx Queue 0 EOF Interrupt
++		unsigned int swtq05_eof		: 1;	// bit 5	GMAC0 SW Tx Queue 5 EOF Interrupt
++		unsigned int swtq04_eof		: 1;	// bit 4	GMAC0 SW Tx Queue 4 EOF Interrupt
++		unsigned int swtq03_eof		: 1;	// bit 3	GMAC0 SW Tx Queue 3 EOF Interrupt
++		unsigned int swtq02_eof		: 1;	// bit 2	GMAC0 SW Tx Queue 2 EOF Interrupt
++		unsigned int swtq01_eof		: 1;	// bit 1	GMAC0 SW Tx Queue 1 EOF Interrupt
++		unsigned int swtq00_eof		: 1;	// bit 0	GMAC0 SW Tx Queue 0 EOF Interrupt
++#else
++		unsigned int swtq00_eof		: 1;	// bit 0	GMAC0 SW Tx Queue 0 EOF Interrupt
++		unsigned int swtq01_eof		: 1;	// bit 1	GMAC0 SW Tx Queue 1 EOF Interrupt
++		unsigned int swtq02_eof		: 1;	// bit 2	GMAC0 SW Tx Queue 2 EOF Interrupt
++		unsigned int swtq03_eof		: 1;	// bit 3	GMAC0 SW Tx Queue 3 EOF Interrupt
++		unsigned int swtq04_eof		: 1;	// bit 4	GMAC0 SW Tx Queue 4 EOF Interrupt
++		unsigned int swtq05_eof		: 1;	// bit 5	GMAC0 SW Tx Queue 5 EOF Interrupt
++		unsigned int swtq10_eof		: 1;	// bit 6	GMAC1 SW Tx Queue 0 EOF Interrupt
++		unsigned int swtq11_eof		: 1;	// bit 7	GMAC1 SW Tx Queue 1 EOF Interrupt
++		unsigned int swtq12_eof		: 1;	// bit 8	GMAC1 SW Tx Queue 2 EOF Interrupt
++		unsigned int swtq13_eof		: 1;	// bit 9	GMAC1 SW Tx Queue 3 EOF Interrupt
++		unsigned int swtq14_eof		: 1;	// bit 10	GMAC1 SW Tx Queue 4 EOF Interrupt
++		unsigned int swtq15_eof		: 1;	// bit 11	GMAC1 SW Tx Queue 5 EOF Interrupt
++		unsigned int swtq00_fin		: 1;	// bit 12	GMAC0 SW Tx Queue 0 Finish Interrupt
++		unsigned int swtq01_fin		: 1;	// bit 13	GMAC0 SW Tx Queue 1 Finish Interrupt
++		unsigned int swtq02_fin		: 1;	// bit 14	GMAC0 SW Tx Queue 2 Finish Interrupt
++		unsigned int swtq03_fin		: 1;	// bit 15	GMAC0 SW Tx Queue 3 Finish Interrupt
++		unsigned int swtq04_fin		: 1;	// bit 16	GMAC0 SW Tx Queue 4 Finish Interrupt
++		unsigned int swtq05_fin		: 1;	// bit 17	GMAC0 SW Tx Queue 5 Finish Interrupt
++		unsigned int swtq10_fin		: 1;	// bit 18	GMAC1 SW Tx Queue 0 Finish Interrupt
++		unsigned int swtq11_fin		: 1;	// bit 19	GMAC1 SW Tx Queue 1 Finish Interrupt
++		unsigned int swtq12_fin		: 1;	// bit 20	GMAC1 SW Tx Queue 2 Finish Interrupt
++		unsigned int swtq13_fin		: 1;	// bit 21	GMAC1 SW Tx Queue 3 Finish Interrupt
++		unsigned int swtq14_fin		: 1;	// bit 22	GMAC1 SW Tx Queue 4 Finish Interrupt
++		unsigned int swtq15_fin		: 1;	// bit 23	GMAC1 SW Tx Queue 5 Finish Interrupt
++		unsigned int rxPerr0		: 1;	// bit 24	GMAC0 Rx Descriptor Protocol Error
++		unsigned int rxDerr0		: 1;	// bit 25	GMAC0 AHB Bus Error while Rx
++		unsigned int rxPerr1		: 1;	// bit 26	GMAC1 Rx Descriptor Protocol Error
++		unsigned int rxDerr1		: 1;	// bit 27	GMAC1 AHB Bus Error while Rx
++		unsigned int txPerr0		: 1;	// bit 28	GMAC0 Tx Descriptor Protocol Error
++		unsigned int txDerr0		: 1;	// bit 29	GMAC0 AHB Bus Error while Tx
++		unsigned int txPerr1		: 1;	// bit 30	GMAC1 Tx Descriptor Protocol Error
++		unsigned int txDerr1		: 1;	// bit 31	GMAC1 AHB Bus Error while Tx
++#endif
++	} bits;
++} INTR_REG0_T;
++
++#define GMAC1_TXDERR_INT_BIT		BIT(31)
++#define GMAC1_TXPERR_INT_BIT		BIT(30)
++#define GMAC0_TXDERR_INT_BIT		BIT(29)
++#define GMAC0_TXPERR_INT_BIT		BIT(28)
++#define GMAC1_RXDERR_INT_BIT		BIT(27)
++#define GMAC1_RXPERR_INT_BIT		BIT(26)
++#define GMAC0_RXDERR_INT_BIT		BIT(25)
++#define GMAC0_RXPERR_INT_BIT		BIT(24)
++#define GMAC1_SWTQ15_FIN_INT_BIT	BIT(23)
++#define GMAC1_SWTQ14_FIN_INT_BIT	BIT(22)
++#define GMAC1_SWTQ13_FIN_INT_BIT	BIT(21)
++#define GMAC1_SWTQ12_FIN_INT_BIT	BIT(20)
++#define GMAC1_SWTQ11_FIN_INT_BIT	BIT(19)
++#define GMAC1_SWTQ10_FIN_INT_BIT	BIT(18)
++#define GMAC0_SWTQ05_FIN_INT_BIT	BIT(17)
++#define GMAC0_SWTQ04_FIN_INT_BIT	BIT(16)
++#define GMAC0_SWTQ03_FIN_INT_BIT	BIT(15)
++#define GMAC0_SWTQ02_FIN_INT_BIT	BIT(14)
++#define GMAC0_SWTQ01_FIN_INT_BIT	BIT(13)
++#define GMAC0_SWTQ00_FIN_INT_BIT	BIT(12)
++#define GMAC1_SWTQ15_EOF_INT_BIT	BIT(11)
++#define GMAC1_SWTQ14_EOF_INT_BIT	BIT(10)
++#define GMAC1_SWTQ13_EOF_INT_BIT	BIT(9)
++#define GMAC1_SWTQ12_EOF_INT_BIT	BIT(8)
++#define GMAC1_SWTQ11_EOF_INT_BIT	BIT(7)
++#define GMAC1_SWTQ10_EOF_INT_BIT	BIT(6)
++#define GMAC0_SWTQ05_EOF_INT_BIT	BIT(5)
++#define GMAC0_SWTQ04_EOF_INT_BIT	BIT(4)
++#define GMAC0_SWTQ03_EOF_INT_BIT	BIT(3)
++#define GMAC0_SWTQ02_EOF_INT_BIT	BIT(2)
++#define GMAC0_SWTQ01_EOF_INT_BIT	BIT(1)
++#define GMAC0_SWTQ00_EOF_INT_BIT	BIT(0)
++
++
++/**********************************************************************
++ * Interrupt Status Register 1 	(offset 0x0030)
++ * Interrupt Mask Register 1 	(offset 0x0034)
++ * Interrupt Select Register 1 	(offset 0x0038)
++ **********************************************************************/
++typedef union
++{
++	unsigned int bits32;
++	struct bit_0030
++	{
++#if (BIG_ENDIAN==1)
++		unsigned int toe_iq3_full	: 1;	// bit 31	TOE Interrupt Queue 3 Full Interrupt
++		unsigned int toe_iq2_full	: 1;	// bit 30	TOE Interrupt Queue 2 Full Interrupt
++		unsigned int toe_iq1_full	: 1;	// bit 29	TOE Interrupt Queue 1 Full Interrupt
++		unsigned int toe_iq0_full	: 1;	// bit 28	TOE Interrupt Queue 0 Full Interrupt
++		unsigned int toe_iq3_intr	: 1;	// bit 27	TOE Interrupt Queue 3 with Interrupts
++		unsigned int toe_iq2_intr	: 1;	// bit 26	TOE Interrupt Queue 2 with Interrupts
++		unsigned int toe_iq1_intr	: 1;	// bit 25	TOE Interrupt Queue 1 with Interrupts
++		unsigned int toe_iq0_intr	: 1;	// bit 24	TOE Interrupt Queue 0 with Interrupts
++		unsigned int hwtq13_eof		: 1;	// bit 23	GMAC1 HW Tx Queue3 EOF Interrupt
++		unsigned int hwtq12_eof		: 1;	// bit 22	GMAC1 HW Tx Queue2 EOF Interrupt
++		unsigned int hwtq11_eof		: 1;	// bit 21	GMAC1 HW Tx Queue1 EOF Interrupt
++		unsigned int hwtq10_eof		: 1;	// bit 20	GMAC1 HW Tx Queue0 EOF Interrupt
++		unsigned int hwtq03_eof		: 1;	// bit 19	GMAC0 HW Tx Queue3 EOF Interrupt
++		unsigned int hwtq02_eof		: 1;	// bit 18	GMAC0 HW Tx Queue2 EOF Interrupt
++		unsigned int hwtq01_eof		: 1;	// bit 17	GMAC0 HW Tx Queue1 EOF Interrupt
++		unsigned int hwtq00_eof		: 1;	// bit 16	GMAC0 HW Tx Queue0 EOF Interrupt
++		unsigned int class_rx		: 14;	// bit 15:2	Classification Queue Rx Interrupt
++		unsigned int default_q1_eof	: 1;	// bit 1	Default Queue 1 EOF Interrupt
++		unsigned int default_q0_eof	: 1;	// bit 0	Default Queue 0 EOF Interrupt
++#else
++		unsigned int default_q0_eof	: 1;	// bit 0	Default Queue 0 EOF Interrupt
++		unsigned int default_q1_eof	: 1;	// bit 1	Default Queue 1 EOF Interrupt
++		unsigned int class_rx		: 14;	// bit 15:2	Classification Queue Rx Interrupt
++		unsigned int hwtq00_eof		: 1;	// bit 16	GMAC0 HW Tx Queue0 EOF Interrupt
++		unsigned int hwtq01_eof		: 1;	// bit 17	GMAC0 HW Tx Queue1 EOF Interrupt
++		unsigned int hwtq02_eof		: 1;	// bit 18	GMAC0 HW Tx Queue2 EOF Interrupt
++		unsigned int hwtq03_eof		: 1;	// bit 19	GMAC0 HW Tx Queue3 EOF Interrupt
++		unsigned int hwtq10_eof		: 1;	// bit 20	GMAC1 HW Tx Queue0 EOF Interrupt
++		unsigned int hwtq11_eof		: 1;	// bit 21	GMAC1 HW Tx Queue1 EOF Interrupt
++		unsigned int hwtq12_eof		: 1;	// bit 22	GMAC1 HW Tx Queue2 EOF Interrupt
++		unsigned int hwtq13_eof		: 1;	// bit 23	GMAC1 HW Tx Queue3 EOF Interrupt
++		unsigned int toe_iq0_intr	: 1;	// bit 24	TOE Interrupt Queue 0 with Interrupts
++		unsigned int toe_iq1_intr	: 1;	// bit 25	TOE Interrupt Queue 1 with Interrupts
++		unsigned int toe_iq2_intr	: 1;	// bit 26	TOE Interrupt Queue 2 with Interrupts
++		unsigned int toe_iq3_intr	: 1;	// bit 27	TOE Interrupt Queue 3 with Interrupts
++		unsigned int toe_iq0_full	: 1;	// bit 28	TOE Interrupt Queue 0 Full Interrupt
++		unsigned int toe_iq1_full	: 1;	// bit 29	TOE Interrupt Queue 1 Full Interrupt
++		unsigned int toe_iq2_full	: 1;	// bit 30	TOE Interrupt Queue 2 Full Interrupt
++		unsigned int toe_iq3_full	: 1;	// bit 31	TOE Interrupt Queue 3 Full Interrupt
++#endif
++	} bits;
++} INTR_REG1_T;
++
++#define TOE_IQ3_FULL_INT_BIT		BIT(31)
++#define TOE_IQ2_FULL_INT_BIT		BIT(30)
++#define TOE_IQ1_FULL_INT_BIT		BIT(29)
++#define TOE_IQ0_FULL_INT_BIT		BIT(28)
++#define TOE_IQ3_INT_BIT				BIT(27)
++#define TOE_IQ2_INT_BIT				BIT(26)
++#define TOE_IQ1_INT_BIT				BIT(25)
++#define TOE_IQ0_INT_BIT				BIT(24)
++#define GMAC1_HWTQ13_EOF_INT_BIT	BIT(23)
++#define GMAC1_HWTQ12_EOF_INT_BIT	BIT(22)
++#define GMAC1_HWTQ11_EOF_INT_BIT	BIT(21)
++#define GMAC1_HWTQ10_EOF_INT_BIT	BIT(20)
++#define GMAC0_HWTQ03_EOF_INT_BIT	BIT(19)
++#define GMAC0_HWTQ02_EOF_INT_BIT	BIT(18)
++#define GMAC0_HWTQ01_EOF_INT_BIT	BIT(17)
++#define GMAC0_HWTQ00_EOF_INT_BIT	BIT(16)
++#define CLASS_RX_INT_BIT(x)			BIT((x+2))
++#define DEFAULT_Q1_INT_BIT			BIT(1)
++#define DEFAULT_Q0_INT_BIT			BIT(0)
++
++#define TOE_IQ_INT_BITS				(TOE_IQ0_INT_BIT | TOE_IQ1_INT_BIT | \
++		               	 			TOE_IQ2_INT_BIT | TOE_IQ3_INT_BIT)
++#define	TOE_IQ_FULL_BITS			(TOE_IQ0_FULL_INT_BIT | TOE_IQ1_FULL_INT_BIT | \
++		                	 		TOE_IQ2_FULL_INT_BIT | TOE_IQ3_FULL_INT_BIT)
++#define	TOE_IQ_ALL_BITS				(TOE_IQ_INT_BITS | TOE_IQ_FULL_BITS)
++#define TOE_CLASS_RX_INT_BITS		0xfffc
++
++/**********************************************************************
++ * Interrupt Status Register 2 	(offset 0x0040)
++ * Interrupt Mask Register 2 	(offset 0x0044)
++ * Interrupt Select Register 2 	(offset 0x0048)
++ **********************************************************************/
++typedef union
++{
++	unsigned int bits32;
++	struct bit_0040
++	{
++#if (BIG_ENDIAN==1)
++		unsigned int toe_q31_full	: 1;	// bit 31	TOE Queue 31 Full Interrupt
++		unsigned int toe_q30_full	: 1;	// bit 30	TOE Queue 30 Full Interrupt
++		unsigned int toe_q29_full	: 1;	// bit 29	TOE Queue 29 Full Interrupt
++		unsigned int toe_q28_full	: 1;	// bit 28	TOE Queue 28 Full Interrupt
++		unsigned int toe_q27_full	: 1;	// bit 27	TOE Queue 27 Full Interrupt
++		unsigned int toe_q26_full	: 1;	// bit 26	TOE Queue 26 Full Interrupt
++		unsigned int toe_q25_full	: 1;	// bit 25	TOE Queue 25 Full Interrupt
++		unsigned int toe_q24_full	: 1;	// bit 24	TOE Queue 24 Full Interrupt
++		unsigned int toe_q23_full	: 1;	// bit 23	TOE Queue 23 Full Interrupt
++		unsigned int toe_q22_full	: 1;	// bit 22	TOE Queue 22 Full Interrupt
++		unsigned int toe_q21_full	: 1;	// bit 21	TOE Queue 21 Full Interrupt
++		unsigned int toe_q20_full	: 1;	// bit 20	TOE Queue 20 Full Interrupt
++		unsigned int toe_q19_full	: 1;	// bit 19	TOE Queue 19 Full Interrupt
++		unsigned int toe_q18_full	: 1;	// bit 18	TOE Queue 18 Full Interrupt
++		unsigned int toe_q17_full	: 1;	// bit 17	TOE Queue 17 Full Interrupt
++		unsigned int toe_q16_full	: 1;	// bit 16	TOE Queue 16 Full Interrupt
++		unsigned int toe_q15_full	: 1;	// bit 15	TOE Queue 15 Full Interrupt
++		unsigned int toe_q14_full	: 1;	// bit 14	TOE Queue 14 Full Interrupt
++		unsigned int toe_q13_full	: 1;	// bit 13	TOE Queue 13 Full Interrupt
++		unsigned int toe_q12_full	: 1;	// bit 12	TOE Queue 12 Full Interrupt
++		unsigned int toe_q11_full	: 1;	// bit 11	TOE Queue 11 Full Interrupt
++		unsigned int toe_q10_full	: 1;	// bit 10	TOE Queue 10 Full Interrupt
++		unsigned int toe_q9_full	: 1;	// bit 9	TOE Queue 9 Full Interrupt
++		unsigned int toe_q8_full	: 1;	// bit 8	TOE Queue 8 Full Interrupt
++		unsigned int toe_q7_full	: 1;	// bit 7	TOE Queue 7 Full Interrupt
++		unsigned int toe_q6_full	: 1;	// bit 6	TOE Queue 6 Full Interrupt
++		unsigned int toe_q5_full	: 1;	// bit 5	TOE Queue 5 Full Interrupt
++		unsigned int toe_q4_full	: 1;	// bit 4	TOE Queue 4 Full Interrupt
++		unsigned int toe_q3_full	: 1;	// bit 3	TOE Queue 3 Full Interrupt
++		unsigned int toe_q2_full	: 1;	// bit 2	TOE Queue 2 Full Interrupt
++		unsigned int toe_q1_full	: 1;	// bit 1	TOE Queue 1 Full Interrupt
++		unsigned int toe_q0_full	: 1;	// bit 0	TOE Queue 0 Full Interrupt
++#else
++		unsigned int toe_q0_full	: 1;	// bit 0	TOE Queue 0 Full Interrupt
++		unsigned int toe_q1_full	: 1;	// bit 1	TOE Queue 1 Full Interrupt
++		unsigned int toe_q2_full	: 1;	// bit 2	TOE Queue 2 Full Interrupt
++		unsigned int toe_q3_full	: 1;	// bit 3	TOE Queue 3 Full Interrupt
++		unsigned int toe_q4_full	: 1;	// bit 4	TOE Queue 4 Full Interrupt
++		unsigned int toe_q5_full	: 1;	// bit 5	TOE Queue 5 Full Interrupt
++		unsigned int toe_q6_full	: 1;	// bit 6	TOE Queue 6 Full Interrupt
++		unsigned int toe_q7_full	: 1;	// bit 7	TOE Queue 7 Full Interrupt
++		unsigned int toe_q8_full	: 1;	// bit 8	TOE Queue 8 Full Interrupt
++		unsigned int toe_q9_full	: 1;	// bit 9	TOE Queue 9 Full Interrupt
++		unsigned int toe_q10_full	: 1;	// bit 10	TOE Queue 10 Full Interrupt
++		unsigned int toe_q11_full	: 1;	// bit 11	TOE Queue 11 Full Interrupt
++		unsigned int toe_q12_full	: 1;	// bit 12	TOE Queue 12 Full Interrupt
++		unsigned int toe_q13_full	: 1;	// bit 13	TOE Queue 13 Full Interrupt
++		unsigned int toe_q14_full	: 1;	// bit 14	TOE Queue 14 Full Interrupt
++		unsigned int toe_q15_full	: 1;	// bit 15	TOE Queue 15 Full Interrupt
++		unsigned int toe_q16_full	: 1;	// bit 16	TOE Queue 16 Full Interrupt
++		unsigned int toe_q17_full	: 1;	// bit 17	TOE Queue 17 Full Interrupt
++		unsigned int toe_q18_full	: 1;	// bit 18	TOE Queue 18 Full Interrupt
++		unsigned int toe_q19_full	: 1;	// bit 19	TOE Queue 19 Full Interrupt
++		unsigned int toe_q20_full	: 1;	// bit 20	TOE Queue 20 Full Interrupt
++		unsigned int toe_q21_full	: 1;	// bit 21	TOE Queue 21 Full Interrupt
++		unsigned int toe_q22_full	: 1;	// bit 22	TOE Queue 22 Full Interrupt
++		unsigned int toe_q23_full	: 1;	// bit 23	TOE Queue 23 Full Interrupt
++		unsigned int toe_q24_full	: 1;	// bit 24	TOE Queue 24 Full Interrupt
++		unsigned int toe_q25_full	: 1;	// bit 25	TOE Queue 25 Full Interrupt
++		unsigned int toe_q26_full	: 1;	// bit 26	TOE Queue 26 Full Interrupt
++		unsigned int toe_q27_full	: 1;	// bit 27	TOE Queue 27 Full Interrupt
++		unsigned int toe_q28_full	: 1;	// bit 28	TOE Queue 28 Full Interrupt
++		unsigned int toe_q29_full	: 1;	// bit 29	TOE Queue 29 Full Interrupt
++		unsigned int toe_q30_full	: 1;	// bit 30	TOE Queue 30 Full Interrupt
++		unsigned int toe_q31_full	: 1;	// bit 31	TOE Queue 31 Full Interrupt
++#endif
++	} bits;
++} INTR_REG2_T;
++
++#define TOE_QL_FULL_INT_BIT(x)		BIT(x)
++
++/**********************************************************************
++ * Interrupt Status Register 3 	(offset 0x0050)
++ * Interrupt Mask Register 3 	(offset 0x0054)
++ * Interrupt Select Register 3 	(offset 0x0058)
++ **********************************************************************/
++typedef union
++{
++	unsigned int bits32;
++	struct bit_0050
++	{
++#if (BIG_ENDIAN==1)
++		unsigned int toe_q63_full	: 1;	// bit 63	TOE Queue 63 Full Interrupt
++		unsigned int toe_q62_full	: 1;	// bit 62	TOE Queue 62 Full Interrupt
++		unsigned int toe_q61_full	: 1;	// bit 61	TOE Queue 61 Full Interrupt
++		unsigned int toe_q60_full	: 1;	// bit 60	TOE Queue 60 Full Interrupt
++		unsigned int toe_q59_full	: 1;	// bit 59	TOE Queue 59 Full Interrupt
++		unsigned int toe_q58_full	: 1;	// bit 58	TOE Queue 58 Full Interrupt
++		unsigned int toe_q57_full	: 1;	// bit 57	TOE Queue 57 Full Interrupt
++		unsigned int toe_q56_full	: 1;	// bit 56	TOE Queue 56 Full Interrupt
++		unsigned int toe_q55_full	: 1;	// bit 55	TOE Queue 55 Full Interrupt
++		unsigned int toe_q54_full	: 1;	// bit 54	TOE Queue 54 Full Interrupt
++		unsigned int toe_q53_full	: 1;	// bit 53	TOE Queue 53 Full Interrupt
++		unsigned int toe_q52_full	: 1;	// bit 52	TOE Queue 52 Full Interrupt
++		unsigned int toe_q51_full	: 1;	// bit 51	TOE Queue 51 Full Interrupt
++		unsigned int toe_q50_full	: 1;	// bit 50	TOE Queue 50 Full Interrupt
++		unsigned int toe_q49_full	: 1;	// bit 49	TOE Queue 49 Full Interrupt
++		unsigned int toe_q48_full	: 1;	// bit 48	TOE Queue 48 Full Interrupt
++		unsigned int toe_q47_full	: 1;	// bit 47	TOE Queue 47 Full Interrupt
++		unsigned int toe_q46_full	: 1;	// bit 46	TOE Queue 46 Full Interrupt
++		unsigned int toe_q45_full	: 1;	// bit 45	TOE Queue 45 Full Interrupt
++		unsigned int toe_q44_full	: 1;	// bit 44	TOE Queue 44 Full Interrupt
++		unsigned int toe_q43_full	: 1;	// bit 43	TOE Queue 43 Full Interrupt
++		unsigned int toe_q42_full	: 1;	// bit 42	TOE Queue 42 Full Interrupt
++		unsigned int toe_q41_full	: 1;	// bit 41	TOE Queue 41 Full Interrupt
++		unsigned int toe_q40_full	: 1;	// bit 40	TOE Queue 40 Full Interrupt
++		unsigned int toe_q39_full	: 1;	// bit 39 	TOE Queue 39 Full Interrupt
++		unsigned int toe_q38_full	: 1;	// bit 38	TOE Queue 38 Full Interrupt
++		unsigned int toe_q37_full	: 1;	// bit 37	TOE Queue 37 Full Interrupt
++		unsigned int toe_q36_full	: 1;	// bit 36	TOE Queue 36 Full Interrupt
++		unsigned int toe_q35_full	: 1;	// bit 35	TOE Queue 35 Full Interrupt
++		unsigned int toe_q34_full	: 1;	// bit 34	TOE Queue 34 Full Interrupt
++		unsigned int toe_q33_full	: 1;	// bit 33	TOE Queue 33 Full Interrupt
++		unsigned int toe_q32_full	: 1;	// bit 32	TOE Queue 32 Full Interrupt
++#else
++		unsigned int toe_q32_full	: 1;	// bit 32	TOE Queue 32 Full Interrupt
++		unsigned int toe_q33_full	: 1;	// bit 33	TOE Queue 33 Full Interrupt
++		unsigned int toe_q34_full	: 1;	// bit 34	TOE Queue 34 Full Interrupt
++		unsigned int toe_q35_full	: 1;	// bit 35	TOE Queue 35 Full Interrupt
++		unsigned int toe_q36_full	: 1;	// bit 36	TOE Queue 36 Full Interrupt
++		unsigned int toe_q37_full	: 1;	// bit 37	TOE Queue 37 Full Interrupt
++		unsigned int toe_q38_full	: 1;	// bit 38	TOE Queue 38 Full Interrupt
++		unsigned int toe_q39_full	: 1;	// bit 39	TOE Queue 39 Full Interrupt
++		unsigned int toe_q40_full	: 1;	// bit 40	TOE Queue 40 Full Interrupt
++		unsigned int toe_q41_full	: 1;	// bit 41	TOE Queue 41 Full Interrupt
++		unsigned int toe_q42_full	: 1;	// bit 42	TOE Queue 42 Full Interrupt
++		unsigned int toe_q43_full	: 1;	// bit 43	TOE Queue 43 Full Interrupt
++		unsigned int toe_q44_full	: 1;	// bit 44	TOE Queue 44 Full Interrupt
++		unsigned int toe_q45_full	: 1;	// bit 45	TOE Queue 45 Full Interrupt
++		unsigned int toe_q46_full	: 1;	// bit 46	TOE Queue 46 Full Interrupt
++		unsigned int toe_q47_full	: 1;	// bit 47	TOE Queue 47 Full Interrupt
++		unsigned int toe_q48_full	: 1;	// bit 48	TOE Queue 48 Full Interrupt
++		unsigned int toe_q49_full	: 1;	// bit 49	TOE Queue 49 Full Interrupt
++		unsigned int toe_q50_full	: 1;	// bit 50	TOE Queue 50 Full Interrupt
++		unsigned int toe_q51_full	: 1;	// bit 51	TOE Queue 51 Full Interrupt
++		unsigned int toe_q52_full	: 1;	// bit 52	TOE Queue 52 Full Interrupt
++		unsigned int toe_q53_full	: 1;	// bit 53	TOE Queue 53 Full Interrupt
++		unsigned int toe_q54_full	: 1;	// bit 54	TOE Queue 54 Full Interrupt
++		unsigned int toe_q55_full	: 1;	// bit 55	TOE Queue 55 Full Interrupt
++		unsigned int toe_q56_full	: 1;	// bit 56	TOE Queue 56 Full Interrupt
++		unsigned int toe_q57_full	: 1;	// bit 57	TOE Queue 57 Full Interrupt
++		unsigned int toe_q58_full	: 1;	// bit 58	TOE Queue 58 Full Interrupt
++		unsigned int toe_q59_full	: 1;	// bit 59	TOE Queue 59 Full Interrupt
++		unsigned int toe_q60_full	: 1;	// bit 60	TOE Queue 60 Full Interrupt
++		unsigned int toe_q61_full	: 1;	// bit 61	TOE Queue 61 Full Interrupt
++		unsigned int toe_q62_full	: 1;	// bit 62	TOE Queue 62 Full Interrupt
++		unsigned int toe_q63_full	: 1;	// bit 63	TOE Queue 63 Full Interrupt
++#endif
++	} bits;
++} INTR_REG3_T;
++
++#define TOE_QH_FULL_INT_BIT(x)		BIT(x-32)
++
++/**********************************************************************
++ * Interrupt Status Register 4 	(offset 0x0060)
++ * Interrupt Mask Register 4 	(offset 0x0064)
++ * Interrupt Select Register 4 	(offset 0x0068)
++ **********************************************************************/
++typedef union
++{
++	unsigned char byte;
++	struct bit_0060
++	{
++#if (BIG_ENDIAN==1)
++		unsigned char reserved		: 1;	//
++		unsigned char cnt_full 		: 1;	// MIB counters half full interrupt
++		unsigned char rx_pause_on	: 1;	// received pause on frame interrupt
++		unsigned char tx_pause_on	: 1;	// transmit pause on frame interrupt
++		unsigned char rx_pause_off  : 1;	// received pause off frame interrupt
++		unsigned char tx_pause_off	: 1;	// received pause off frame interrupt
++		unsigned char rx_overrun	: 1;    // GMAC Rx FIFO overrun interrupt
++		unsigned char status_changed: 1;	// Status Changed Intr for RGMII Mode
++#else
++		unsigned char status_changed: 1;	// Status Changed Intr for RGMII Mode
++		unsigned char rx_overrun	: 1;   // GMAC Rx FIFO overrun interrupt
++		unsigned char tx_pause_off	: 1;	// received pause off frame interrupt
++		unsigned char rx_pause_off  : 1;	// received pause off frame interrupt
++		unsigned char tx_pause_on	: 1;	// transmit pause on frame interrupt
++		unsigned char rx_pause_on	: 1;	// received pause on frame interrupt
++		unsigned char cnt_full 		: 1;	// MIB counters half full interrupt
++		unsigned char reserved		: 1;	//
++#endif
++	} _PACKED_ bits;
++} _PACKED_ GMAC_INTR_T;
++
++typedef union
++{
++	unsigned int bits32;
++	struct bit_0060_2
++	{
++#if (BIG_ENDIAN==1)
++		GMAC_INTR_T		gmac1;
++		GMAC_INTR_T		gmac0;
++		unsigned int	class_qf_int: 14;	// bit 15:2 Classification Rx Queue13-0 Full Intr.
++		unsigned int    hwfq_empty	: 1;	// bit 1	Hardware Free Queue Empty Intr.
++		unsigned int    swfq_empty	: 1;	// bit 0	Software Free Queue Empty Intr.
++#else
++#endif
++		unsigned int    swfq_empty	: 1;	// bit 0	Software Free Queue Empty Intr.
++		unsigned int    hwfq_empty	: 1;	// bit 1	Hardware Free Queue Empty Intr.
++		unsigned int	class_qf_int: 14;	// bit 15:2 Classification Rx Queue13-0 Full Intr.
++		GMAC_INTR_T		gmac0;
++		GMAC_INTR_T		gmac1;
++	} bits;
++} INTR_REG4_T;
++
++#define GMAC1_RESERVED_INT_BIT		BIT(31)
++#define GMAC1_MIB_INT_BIT			BIT(30)
++#define GMAC1_RX_PAUSE_ON_INT_BIT	BIT(29)
++#define GMAC1_TX_PAUSE_ON_INT_BIT	BIT(28)
++#define GMAC1_RX_PAUSE_OFF_INT_BIT	BIT(27)
++#define GMAC1_TX_PAUSE_OFF_INT_BIT	BIT(26)
++#define GMAC1_RX_OVERRUN_INT_BIT	BIT(25)
++#define GMAC1_STATUS_CHANGE_INT_BIT	BIT(24)
++#define GMAC0_RESERVED_INT_BIT		BIT(23)
++#define GMAC0_MIB_INT_BIT			BIT(22)
++#define GMAC0_RX_PAUSE_ON_INT_BIT	BIT(21)
++#define GMAC0_TX_PAUSE_ON_INT_BIT	BIT(20)
++#define GMAC0_RX_PAUSE_OFF_INT_BIT	BIT(19)
++#define GMAC0_TX_PAUSE_OFF_INT_BIT	BIT(18)
++#define GMAC0_RX_OVERRUN_INT_BIT	BIT(17)
++#define GMAC0_STATUS_CHANGE_INT_BIT	BIT(16)
++#define CLASS_RX_FULL_INT_BIT(x)	BIT((x+2))
++#define HWFQ_EMPTY_INT_BIT			BIT(1)
++#define SWFQ_EMPTY_INT_BIT			BIT(0)
++
++#if 1
++#define GMAC0_INT_BITS				(GMAC0_MIB_INT_BIT)
++#define GMAC1_INT_BITS				(GMAC1_MIB_INT_BIT)
++#else
++#define GMAC0_INT_BITS				(GMAC0_RESERVED_INT_BIT | GMAC0_MIB_INT_BIT | \
++									 GMAC0_RX_PAUSE_ON_INT_BIT | GMAC0_TX_PAUSE_ON_INT_BIT |	\
++									 GMAC0_RX_PAUSE_OFF_INT_BIT | GMAC0_TX_PAUSE_OFF_INT_BIT | 	\
++									 GMAC0_RX_OVERRUN_INT_BIT | GMAC0_STATUS_CHANGE_INT_BIT)
++#define GMAC1_INT_BITS				(GMAC1_RESERVED_INT_BIT | GMAC1_MIB_INT_BIT | \
++									 GMAC1_RX_PAUSE_ON_INT_BIT | GMAC1_TX_PAUSE_ON_INT_BIT |	\
++									 GMAC1_RX_PAUSE_OFF_INT_BIT | GMAC1_TX_PAUSE_OFF_INT_BIT | 	\
++									 GMAC1_RX_OVERRUN_INT_BIT | GMAC1_STATUS_CHANGE_INT_BIT)
++#endif
++
++#define CLASS_RX_FULL_INT_BITS		0xfffc
++
++/**********************************************************************
++ * GLOBAL_QUEUE_THRESHOLD_REG 	(offset 0x0070)
++ **********************************************************************/
++typedef union
++{
++	unsigned int bits32;
++	struct bit_0070_2
++	{
++#if (BIG_ENDIAN==1)
++		unsigned int	toe_class	: 8;	// 31:24
++		unsigned int	intrq		: 8;	// 23:16
++		unsigned int    hwfq_empty	: 8;	// 15:8		Hardware Free Queue Empty Threshold
++		unsigned int    swfq_empty	: 8;	//  7:0  	Software Free Queue Empty Threshold
++#else
++#endif
++		unsigned int    swfq_empty	: 8;	//  7:0  	Software Free Queue Empty Threshold
++		unsigned int    hwfq_empty	: 8;	// 15:8		Hardware Free Queue Empty Threshold
++		unsigned int	intrq		: 8;	// 23:16
++		unsigned int	toe_class	: 8;	// 31:24
++	} bits;
++} QUEUE_THRESHOLD_T;
++
++
++/**********************************************************************
++ * GMAC DMA Control Register
++ * GMAC0 offset 0x8000
++ * GMAC1 offset 0xC000
++ **********************************************************************/
++typedef union
++{
++	unsigned int bits32;
++	struct bit_8000
++	{
++#if (BIG_ENDIAN==1)
++		unsigned int    rd_enable		: 1;	// bit 31	Rx DMA Enable
++		unsigned int    td_enable		: 1;	// bit 30	Tx DMA Enable
++		unsigned int    loopback		: 1;	// bit 29	Loopback TxDMA to RxDMA
++		unsigned int    drop_small_ack	: 1;	// bit 28	1: Drop, 0: Accept
++		unsigned int	reserved		: 10;	// bit 27:18
++		unsigned int	rd_insert_bytes	: 2;	// bit 17:16
++		unsigned int	rd_prot			: 4;	// bit 15:12 DMA Protection Control
++		unsigned int	rd_burst_size	: 2;	// bit 11:10 DMA max burst size for every AHB request
++		unsigned int	rd_bus		    : 2;	// bit 9:8 	Peripheral Bus Width
++		unsigned int	td_prot			: 4;	// bit 7:4  TxDMA protection control
++		unsigned int	td_burst_size	: 2;	// bit 3:2	TxDMA max burst size for every AHB request
++		unsigned int	td_bus		    : 2;	// bit 1:0  Peripheral Bus Width
++#else
++		unsigned int	td_bus		    : 2;	// bit 1:0  Peripheral Bus Width
++		unsigned int	td_burst_size	: 2;	// bit 3:2	TxDMA max burst size for every AHB request
++		unsigned int	td_prot			: 4;	// bit 7:4  TxDMA protection control
++		unsigned int	rd_bus		    : 2;	// bit 9:8 	Peripheral Bus Width
++		unsigned int	rd_burst_size	: 2;	// bit 11:10 DMA max burst size for every AHB request
++		unsigned int	rd_prot			: 4;	// bit 15:12 DMA Protection Control
++		unsigned int	rd_insert_bytes	: 2;	// bit 17:16
++		unsigned int	reserved		: 10;	// bit 27:18
++		unsigned int    drop_small_ack	: 1;	// bit 28	1: Drop, 0: Accept
++		unsigned int    loopback		: 1;	// bit 29	Loopback TxDMA to RxDMA
++		unsigned int    td_enable		: 1;	// bit 30	Tx DMA Enable
++		unsigned int    rd_enable		: 1;	// bit 31	Rx DMA Enable
++#endif
++	} bits;
++} GMAC_DMA_CTRL_T;
++
++/**********************************************************************
++ * GMAC Tx Weighting Control Register 0
++ * GMAC0 offset 0x8004
++ * GMAC1 offset 0xC004
++ **********************************************************************/
++typedef union
++{
++	unsigned int bits32;
++	struct bit_8004
++	{
++#if (BIG_ENDIAN==1)
++		unsigned int    reserved		: 8;	// bit 31:24
++		unsigned int    hw_tq3			: 6;	// bit 23:18	HW TX Queue 0
++		unsigned int    hw_tq2			: 6;	// bit 17:12	HW TX Queue 1
++		unsigned int    hw_tq1			: 6;	// bit 11:6		HW TX Queue 2
++		unsigned int    hw_tq0			: 6;	// bit 5:0		HW TX Queue 3
++#else
++		unsigned int    hw_tq0			: 6;	// bit 5:0		HW TX Queue 3
++		unsigned int    hw_tq1			: 6;	// bit 11:6		HW TX Queue 2
++		unsigned int    hw_tq2			: 6;	// bit 17:12	HW TX Queue 1
++		unsigned int    hw_tq3			: 6;	// bit 23:18	HW TX Queue 0
++		unsigned int    reserved		: 8;	// bit 31:24
++#endif
++	} bits;
++} GMAC_TX_WCR0_T;	// Weighting Control Register 0
++
++/**********************************************************************
++ * GMAC Tx Weighting Control Register 1
++ * GMAC0 offset 0x8008
++ * GMAC1 offset 0xC008
++ **********************************************************************/
++typedef union
++{
++	unsigned int bits32;
++	struct bit_8008
++	{
++#if (BIG_ENDIAN==1)
++		unsigned int    reserved		: 2;	// bit 31:30
++		unsigned int    sw_tq5			: 5;	// bit 29:25	SW TX Queue 5
++		unsigned int    sw_tq4			: 5;	// bit 24:20	SW TX Queue 4
++		unsigned int    sw_tq3			: 5;	// bit 19:15	SW TX Queue 3
++		unsigned int    sw_tq2			: 5;	// bit 14:10	SW TX Queue 2
++		unsigned int    sw_tq1			: 5;	// bit 9:5		SW TX Queue 1
++		unsigned int    sw_tq0			: 5;	// bit 4:0		SW TX Queue 0
++#else
++		unsigned int    sw_tq0			: 5;	// bit 4:0		SW TX Queue 0
++		unsigned int    sw_tq1			: 5;	// bit 9:5		SW TX Queue 1
++		unsigned int    sw_tq2			: 5;	// bit 14:10	SW TX Queue 2
++		unsigned int    sw_tq3			: 5;	// bit 19:15	SW TX Queue 3
++		unsigned int    sw_tq4			: 5;	// bit 24:20	SW TX Queue 4
++		unsigned int    sw_tq5			: 5;	// bit 29:25	SW TX Queue 5
++		unsigned int    reserved		: 2;	// bit 31:30
++#endif
++	} bits;
++} GMAC_TX_WCR1_T;	// Weighting Control Register 1
++
++/**********************************************************************
++ * Queue Read/Write Pointer
++ * GMAC SW TX Queue 0~5 Read/Write Pointer register
++ * GMAC0 offset 0x800C ~ 0x8020
++ * GMAC1 offset 0xC00C ~ 0xC020
++ * GMAC HW TX Queue 0~3 Read/Write Pointer register
++ * GMAC0 offset 0x8024 ~ 0x8030
++ * GMAC1 offset 0xC024 ~ 0xC030
++ **********************************************************************/
++// see DMA_RWPTR_T structure
++
++/**********************************************************************
++ * GMAC DMA Tx First Description Address Register
++ * GMAC0 offset 0x8038
++ * GMAC1 offset 0xC038
++ **********************************************************************/
++typedef union
++{
++	unsigned int bits32;
++	struct bit_8038
++	{
++#if (BIG_ENDIAN==1)
++		unsigned int td_first_des_ptr	: 28;	// bit 31:4	first descriptor address
++		unsigned int td_busy			:  1;	// bit 3	1: TxDMA busy; 0: TxDMA idle
++		unsigned int reserved			:  3;
++#else
++		unsigned int reserved			:  3;
++		unsigned int td_busy			:  1;	// bit 3	1: TxDMA busy; 0: TxDMA idle
++		unsigned int td_first_des_ptr	: 28;	// bit 31:4	first descriptor address
++#endif
++	} bits;
++} GMAC_TXDMA_FIRST_DESC_T;
++
++/**********************************************************************
++ * GMAC DMA Tx Current Description Address Register
++ * GMAC0 offset 0x803C
++ * GMAC1 offset 0xC03C
++ **********************************************************************/
++typedef union
++{
++	unsigned int bits32;
++	struct bit_803C
++	{
++#if (BIG_ENDIAN==1)
++		unsigned int td_curr_desc_ptr	: 28;	// bit 31:4	current descriptor address
++		unsigned int reserved			:  4;
++#else
++		unsigned int reserved			:  4;
++		unsigned int td_curr_desc_ptr	: 28;	// bit 31:4	current descriptor address
++#endif
++	} bits;
++} GMAC_TXDMA_CURR_DESC_T;
++
++/**********************************************************************
++ * GMAC DMA Tx Description Word 0 Register
++ * GMAC0 offset 0x8040
++ * GMAC1 offset 0xC040
++ **********************************************************************/
++typedef union
++{
++	unsigned int bits32;
++	struct bit_8040
++	{
++#if (BIG_ENDIAN==1)
++		unsigned int reserved		: 1;	// bit 31
++		unsigned int derr			: 1;	// bit 30	 data error during processing this descriptor
++		unsigned int perr			: 1;	// bit 29	 protocol error during processing this descriptor
++		unsigned int status_rvd		: 6;	// bit 28:23 Tx Status, Reserved bits
++		unsigned int status_tx_ok	: 1;	// bit 22    Tx Status, 1: Successful 0: Failed
++		unsigned int desc_count 	: 6;	// bit 21:16 number of descriptors used for the current frame
++		unsigned int buffer_size 	: 16;	// bit 15:0  Transfer size
++#else
++		unsigned int buffer_size 	: 16;	// bit 15:0  Transfer size
++		unsigned int desc_count 	: 6;	// bit 21:16 number of descriptors used for the current frame
++		unsigned int status_tx_ok	: 1;	// bit 22    Tx Status, 1: Successful 0: Failed
++		unsigned int status_rvd		: 6;	// bit 28:23 Tx Status, Reserved bits
++		unsigned int perr			: 1;	// bit 29	 protocol error during processing this descriptor
++		unsigned int derr			: 1;	// bit 30	 data error during processing this descriptor
++		unsigned int reserved		: 1;	// bit 31
++#endif
++	} bits;
++} GMAC_TXDESC_0_T;
++
++/**********************************************************************
++ * GMAC DMA Tx Description Word 1 Register
++ * GMAC0 offset 0x8044
++ * GMAC1 offset 0xC044
++ **********************************************************************/
++typedef union
++{
++	unsigned int bits32;
++	struct txdesc_word1
++	{
++#if (BIG_ENDIAN==1)
++		unsigned int	reserved	: 9;	// bit 31:23 	Tx Flag, Reserved
++		unsigned int	ip_fixed_len: 1;	// bit 22
++		unsigned int	bypass_tss	: 1;	// bit 21
++		unsigned int	udp_chksum	: 1;	// bit 20		UDP Checksum Enable
++		unsigned int	tcp_chksum	: 1;	// bit 19		TCP Checksum Enable
++		unsigned int	ipv6_enable	: 1;	// bit 18		IPV6 Tx Enable
++		unsigned int	ip_chksum	: 1;	// bit 17		IPV4 Header Checksum Enable
++		unsigned int	mtu_enable	: 1;	// bit 16		TSS segmentation use MTU setting
++		unsigned int	byte_count	: 16;	// bit 15: 0	Tx Frame Byte Count
++#else
++		unsigned int	byte_count	: 16;	// bit 15: 0	Tx Frame Byte Count
++		unsigned int	mtu_enable	: 1;	// bit 16		TSS segmentation use MTU setting
++		unsigned int	ip_chksum	: 1;	// bit 17		IPV4 Header Checksum Enable
++		unsigned int	ipv6_enable	: 1;	// bit 18		IPV6 Tx Enable
++		unsigned int	tcp_chksum	: 1;	// bit 19		TCP Checksum Enable
++		unsigned int	udp_chksum	: 1;	// bit 20		UDP Checksum Enable
++		unsigned int	bypass_tss	: 1;	// bit 21
++		unsigned int	ip_fixed_len: 1;	// bit 22
++		unsigned int	reserved	: 9;	// bit 31:23 	Tx Flag, Reserved
++#endif
++	} bits;
++} GMAC_TXDESC_1_T;
++
++#define TSS_IP_FIXED_LEN_BIT	BIT(22)
++#define TSS_UDP_CHKSUM_BIT		BIT(20)
++#define TSS_TCP_CHKSUM_BIT		BIT(19)
++#define TSS_IPV6_ENABLE_BIT		BIT(18)
++#define TSS_IP_CHKSUM_BIT		BIT(17)
++#define TSS_MTU_ENABLE_BIT		BIT(16)
++
++/**********************************************************************
++ * GMAC DMA Tx Description Word 2 Register
++ * GMAC0 offset 0x8048
++ * GMAC1 offset 0xC048
++ **********************************************************************/
++typedef union
++{
++	unsigned int	bits32;
++	unsigned int 	buf_adr;
++} GMAC_TXDESC_2_T;
++
++/**********************************************************************
++ * GMAC DMA Tx Description Word 3 Register
++ * GMAC0 offset 0x804C
++ * GMAC1 offset 0xC04C
++ **********************************************************************/
++typedef union
++{
++	unsigned int bits32;
++	struct txdesc_word3
++	{
++#if (BIG_ENDIAN==1)
++		unsigned int	sof_eof		: 2;	// bit 31:30 	11: only one, 10: first, 01: last, 00: linking
++		unsigned int	eofie		: 1;	// bit 29		End of frame interrupt enable
++		unsigned int	reserved	: 18;	// bit 28:11
++		unsigned int	mtu_size	: 11;	// bit 10: 0	Tx Frame Byte Count
++#else
++		unsigned int	mtu_size	: 11;	// bit 10: 0	Tx Frame Byte Count
++		unsigned int	reserved	: 18;	// bit 28:11
++		unsigned int	eofie		: 1;	// bit 29		End of frame interrupt enable
++		unsigned int	sof_eof		: 2;	// bit 31:30 	11: only one, 10: first, 01: last, 00: linking
++#endif
++	} bits;
++} GMAC_TXDESC_3_T;
++#define SOF_EOF_BIT_MASK	0x3fffffff
++#define SOF_BIT				0x80000000
++#define EOF_BIT				0x40000000
++#define EOFIE_BIT			BIT(29)
++#define MTU_SIZE_BIT_MASK	0x7ff
++
++/**********************************************************************
++ * GMAC Tx Descriptor
++ **********************************************************************/
++typedef struct
++{
++	GMAC_TXDESC_0_T	word0;
++	GMAC_TXDESC_1_T	word1;
++	GMAC_TXDESC_2_T	word2;
++	GMAC_TXDESC_3_T	word3;
++} GMAC_TXDESC_T;
++
++
++/**********************************************************************
++ * GMAC DMA Rx First Description Address Register
++ * GMAC0 offset 0x8058
++ * GMAC1 offset 0xC058
++ **********************************************************************/
++typedef union
++{
++	unsigned int bits32;
++	struct bit_8058
++	{
++#if (BIG_ENDIAN==1)
++		unsigned int rd_first_des_ptr	: 28;	// bit 31:4 first descriptor address
++		unsigned int rd_busy			:  1;	// bit 3	1-RxDMA busy; 0-RxDMA idle
++		unsigned int reserved			:  3;	// bit 2:0
++#else
++		unsigned int reserved			:  3;	// bit 2:0
++		unsigned int rd_busy			:  1;	// bit 3	1-RxDMA busy; 0-RxDMA idle
++		unsigned int rd_first_des_ptr	: 28;	// bit 31:4 first descriptor address
++#endif
++	} bits;
++} GMAC_RXDMA_FIRST_DESC_T;
++
++/**********************************************************************
++ * GMAC DMA Rx Current Description Address Register
++ * GMAC0 offset 0x805C
++ * GMAC1 offset 0xC05C
++ **********************************************************************/
++typedef union
++{
++	unsigned int bits32;
++	struct bit_805C
++	{
++#if (BIG_ENDIAN==1)
++		unsigned int rd_curr_des_ptr	: 28;	// bit 31:4 current descriptor address
++		unsigned int reserved			:  4;	// bit 3:0
++#else
++		unsigned int reserved			:  4;	// bit 3:0
++		unsigned int rd_curr_des_ptr	: 28;	// bit 31:4 current descriptor address
++#endif
++	} bits;
++} GMAC_RXDMA_CURR_DESC_T;
++
++/**********************************************************************
++ * GMAC DMA Rx Description Word 0 Register
++ * GMAC0 offset 0x8060
++ * GMAC1 offset 0xC060
++ **********************************************************************/
++typedef union
++{
++	unsigned int bits32;
++	struct bit_8060
++	{
++#if (BIG_ENDIAN==1)
++		unsigned int drop			: 1;	// bit 31	 TOE/CIS Queue Full dropped packet to default queue
++		unsigned int derr			: 1;	// bit 30	 data error during processing this descriptor
++		unsigned int perr			: 1;	// bit 29	 protocol error during processing this descriptor
++		unsigned int chksum_status	: 3;	// bit 28:26 Check Sum Status
++		unsigned int status			: 4;	// bit 24:22 Status of rx frame
++		unsigned int desc_count 	: 6;	// bit 21:16 number of descriptors used for the current frame
++		unsigned int buffer_size 	: 16;	// bit 15:0  number of descriptors used for the current frame
++#else
++		unsigned int buffer_size 	: 16;	// bit 15:0  number of descriptors used for the current frame
++		unsigned int desc_count 	: 6;	// bit 21:16 number of descriptors used for the current frame
++		unsigned int status			: 4;	// bit 24:22 Status of rx frame
++		unsigned int chksum_status	: 3;	// bit 28:26 Check Sum Status
++		unsigned int perr			: 1;	// bit 29	 protocol error during processing this descriptor
++		unsigned int derr			: 1;	// bit 30	 data error during processing this descriptor
++		unsigned int drop			: 1;	// bit 31	 TOE/CIS Queue Full dropped packet to default queue
++#endif
++	} bits;
++} GMAC_RXDESC_0_T;
++
++#define		GMAC_RXDESC_0_T_derr				BIT(30)
++#define		GMAC_RXDESC_0_T_perr				BIT(29)
++#define		GMAC_RXDESC_0_T_chksum_status(x)	BIT((x+26))
++#define		GMAC_RXDESC_0_T_status(x)			BIT((x+22))
++#define		GMAC_RXDESC_0_T_desc_count(x)		BIT((x+16))
++
++#define	RX_CHKSUM_IP_UDP_TCP_OK			0
++#define	RX_CHKSUM_IP_OK_ONLY			1
++#define	RX_CHKSUM_NONE					2
++#define	RX_CHKSUM_IP_ERR_UNKNOWN		4
++#define	RX_CHKSUM_IP_ERR				5
++#define	RX_CHKSUM_TCP_UDP_ERR			6
++#define RX_CHKSUM_NUM					8
++
++#define RX_STATUS_GOOD_FRAME			0
++#define RX_STATUS_TOO_LONG_GOOD_CRC		1
++#define RX_STATUS_RUNT_FRAME			2
++#define RX_STATUS_SFD_NOT_FOUND			3
++#define RX_STATUS_CRC_ERROR				4
++#define RX_STATUS_TOO_LONG_BAD_CRC		5
++#define RX_STATUS_ALIGNMENT_ERROR		6
++#define RX_STATUS_TOO_LONG_BAD_ALIGN	7
++#define RX_STATUS_RX_ERR				8
++#define RX_STATUS_DA_FILTERED			9
++#define RX_STATUS_BUFFER_FULL			10
++#define RX_STATUS_NUM					16
++
++
++/**********************************************************************
++ * GMAC DMA Rx Description Word 1 Register
++ * GMAC0 offset 0x8064
++ * GMAC1 offset 0xC064
++ **********************************************************************/
++typedef union
++{
++	unsigned int bits32;
++	struct rxdesc_word1
++	{
++#if (BIG_ENDIAN==1)
++		unsigned int	sw_id		: 16;	// bit 31:16	Software ID
++		unsigned int	byte_count	: 16;	// bit 15: 0	Rx Frame Byte Count
++#else
++		unsigned int	byte_count	: 16;	// bit 15: 0	Rx Frame Byte Count
++		unsigned int	sw_id		: 16;	// bit 31:16	Software ID
++#endif
++	} bits;
++} GMAC_RXDESC_1_T;
++
++/**********************************************************************
++ * GMAC DMA Rx Description Word 2 Register
++ * GMAC0 offset 0x8068
++ * GMAC1 offset 0xC068
++ **********************************************************************/
++typedef union
++{
++	unsigned int	bits32;
++	unsigned int	buf_adr;
++} GMAC_RXDESC_2_T;
++
++#define RX_INSERT_NONE		0
++#define RX_INSERT_1_BYTE	1
++#define RX_INSERT_2_BYTE	2
++#define RX_INSERT_3_BYTE	3
++
++#define RX_INSERT_BYTES		RX_INSERT_2_BYTE
++/**********************************************************************
++ * GMAC DMA Rx Description Word 3 Register
++ * GMAC0 offset 0x806C
++ * GMAC1 offset 0xC06C
++ **********************************************************************/
++typedef union
++{
++	unsigned int bits32;
++	struct rxdesc_word3
++	{
++#if (BIG_ENDIAN==1)
++		unsigned int	sof_eof		: 2;	// bit 31:30 	11: only one, 10: first, 01: last, 00: linking
++		unsigned int	eofie		: 1;	// bit 29		End of frame interrupt enable
++		unsigned int	ctrl_flag	: 1;	// bit 28 		Control Flag is present
++		unsigned int	out_of_seq	: 1;	// bit 27		Out of Sequence packet
++		unsigned int	option		: 1;	// bit 26		IPV4 option or IPV6 extension header
++		unsigned int	abnormal	: 1;	// bit 25		abnormal case found
++		unsigned int	dup_ack		: 1;	// bit 24		Duplicated ACK detected
++		unsigned int	l7_offset	: 8;	// bit 23: 16	L7 data offset
++		unsigned int	l4_offset	: 8;	// bit 15: 8	L4 data offset
++		unsigned int	l3_offset	: 8;	// bit 7: 0		L3 data offset
++#else
++		unsigned int	l3_offset	: 8;	// bit 7: 0		L3 data offset
++		unsigned int	l4_offset	: 8;	// bit 15: 8	L4 data offset
++		unsigned int	l7_offset	: 8;	// bit 23: 16	L7 data offset
++		unsigned int	dup_ack		: 1;	// bit 24		Duplicated ACK detected
++		unsigned int	abnormal	: 1;	// bit 25		abnormal case found
++		unsigned int	option		: 1;	// bit 26		IPV4 option or IPV6 extension header
++		unsigned int	out_of_seq	: 1;	// bit 27		Out of Sequence packet
++		unsigned int	ctrl_flag	: 1;	// bit 28 		Control Flag is present
++		unsigned int	eofie		: 1;	// bit 29		End of frame interrupt enable
++		unsigned int	sof_eof		: 2;	// bit 31:30 	11: only one, 10: first, 01: last, 00: linking
++#endif
++	} bits;
++} GMAC_RXDESC_3_T;
++
++/**********************************************************************
++ * GMAC Rx Descriptor
++ **********************************************************************/
++typedef struct
++{
++	GMAC_RXDESC_0_T	word0;
++	GMAC_RXDESC_1_T	word1;
++	GMAC_RXDESC_2_T	word2;
++	GMAC_RXDESC_3_T	word3;
++} GMAC_RXDESC_T;
++
++/**********************************************************************
++ * GMAC Hash Engine Enable/Action Register 0 Offset Register
++ * GMAC0 offset 0x8070
++ * GMAC1 offset 0xC070
++ **********************************************************************/
++typedef union
++{
++	unsigned int bits32;
++	struct bit_8070
++	{
++#if (BIG_ENDIAN==1)
++		unsigned int	mr1en		: 1;	// bit 31		Enable Matching Rule 1
++		unsigned int	reserved1	: 1;	// bit 30
++		unsigned int	timing		: 3;	// bit 29:27
++		unsigned int	mr1_action	: 5;	// bit 26:22	Matching Rule 1 action offset
++		unsigned int	mr1hel		: 6;	// bit 21:16	match rule 1 hash entry size
++		unsigned int	mr0en		: 1;	// bit 15		Enable Matching Rule 0
++		unsigned int	reserved0	: 4;	// bit 14:11
++		unsigned int	mr0_action	: 5;	// bit 10:6		Matching Rule 0 action offset
++		unsigned int	mr0hel		: 6;	// bit 5:0		match rule 0 hash entry size
++#else
++		unsigned int	mr0hel		: 6;	// bit 5:0		match rule 0 hash entry size
++		unsigned int	mr0_action	: 5;	// bit 10:6		Matching Rule 0 action offset
++		unsigned int	reserved0	: 4;	// bit 14:11
++		unsigned int	mr0en		: 1;	// bit 15		Enable Matching Rule 0
++		unsigned int	mr1hel		: 6;	// bit 21:16	match rule 1 hash entry size
++		unsigned int	mr1_action	: 5;	// bit 26:22	Matching Rule 1 action offset
++		unsigned int	timing		: 3;	// bit 29:27
++		unsigned int	reserved1	: 1;	// bit 30
++		unsigned int	mr1en		: 1;	// bit 31		Enable Matching Rule 1
++#endif
++	} bits;
++} GMAC_HASH_ENABLE_REG0_T;
++
++/**********************************************************************
++ * GMAC Hash Engine Enable/Action Register 1 Offset Register
++ * GMAC0 offset 0x8074
++ * GMAC1 offset 0xC074
++ **********************************************************************/
++typedef union
++{
++	unsigned int bits32;
++	struct bit_8074
++	{
++#if (BIG_ENDIAN==1)
++		unsigned int	mr3en		: 1;	// bit 31		Enable Matching Rule 3
++		unsigned int	reserved3	: 4;	// bit 30:27
++		unsigned int	mr3_action	: 5;	// bit 26:22	Matching Rule 3 action offset
++		unsigned int	mr3hel		: 6;	// bit 21:16	match rule 3 hash entry size
++		unsigned int	mr2en		: 1;	// bit 15		Enable Matching Rule 2
++		unsigned int	reserved2	: 4;	// bit 14:11
++		unsigned int	mr2_action	: 5;	// bit 10:6		Matching Rule 2 action offset
++		unsigned int	mr2hel		: 6;	// bit 5:0		match rule 2 hash entry size
++#else
++		unsigned int	mr2hel		: 6;	// bit 5:0		match rule 2 hash entry size
++		unsigned int	mr2_action	: 5;	// bit 10:6		Matching Rule 2 action offset
++		unsigned int	reserved2	: 4;	// bit 14:11
++		unsigned int	mr2en		: 1;	// bit 15		Enable Matching Rule 2
++		unsigned int	mr3hel		: 6;	// bit 21:16	match rule 3 hash entry size
++		unsigned int	mr3_action	: 5;	// bit 26:22	Matching Rule 3 action offset
++		unsigned int	reserved1	: 4;	// bit 30:27
++		unsigned int	mr3en		: 1;	// bit 31		Enable Matching Rule 3
++#endif
++	} bits;
++} GMAC_HASH_ENABLE_REG1_T;
++
++
++/**********************************************************************
++ * GMAC Matching Rule Control Register 0
++ * GMAC0 offset 0x8078
++ * GMAC1 offset 0xC078
++ **********************************************************************/
++typedef union
++{
++	unsigned int bits32;
++	struct bit_8078
++	{
++#if (BIG_ENDIAN==1)
++		unsigned int	l2			: 1;	// bit 31		L2 matching enable
++		unsigned int	l3			: 1;	// bit 30		L3 matching enable
++		unsigned int	l4			: 1;	// bit 29		L4 matching enable
++		unsigned int	l7			: 1;	// bit 28		L7 matching enable
++		unsigned int	port		: 1;	// bit 27		PORT ID matching enable
++		unsigned int	priority	: 3;	// bit 26:24	priority if multi-rules matched
++		unsigned int	da			: 1;	// bit 23		MAC DA enable
++		unsigned int	sa			: 1;	// bit 22		MAC SA enable
++		unsigned int	ether_type	: 1;	// bit 21		Ethernet type enable
++		unsigned int	vlan		: 1;	// bit 20		VLAN ID enable
++		unsigned int	pppoe		: 1;	// bit 19		PPPoE Session ID enable
++		unsigned int	reserved1	: 3;	// bit 18:16
++		unsigned int	ip_version	: 1;	// bit 15		0: IPV4, 1: IPV6
++		unsigned int	ip_hdr_len	: 1;	// bit 14		IPV4 Header length
++		unsigned int	flow_lable	: 1;	// bit 13		IPV6 Flow label
++		unsigned int	tos_traffic	: 1;	// bit 12		IPV4 TOS or IPV6 Traffice Class
++		unsigned int	reserved2	: 4;	// bit 11:8
++		unsigned int	sprx		: 8;	// bit 7:0		Support Protocol Register 7:0
++#else
++		unsigned int	sprx		: 8;	// bit 7:0		Support Protocol Register 7:0
++		unsigned int	reserved2	: 4;	// bit 11:8
++		unsigned int	tos_traffic	: 1;	// bit 12		IPV4 TOS or IPV6 Traffice Class
++		unsigned int	flow_lable	: 1;	// bit 13		IPV6 Flow label
++		unsigned int	ip_hdr_len	: 1;	// bit 14		IPV4 Header length
++		unsigned int	ip_version	: 1;	// bit 15		0: IPV4, 1: IPV6
++		unsigned int	reserved1	: 3;	// bit 18:16
++		unsigned int	pppoe		: 1;	// bit 19		PPPoE Session ID enable
++		unsigned int	vlan		: 1;	// bit 20		VLAN ID enable
++		unsigned int	ether_type	: 1;	// bit 21		Ethernet type enable
++		unsigned int	sa			: 1;	// bit 22		MAC SA enable
++		unsigned int	da			: 1;	// bit 23		MAC DA enable
++		unsigned int	priority	: 3;	// bit 26:24	priority if multi-rules matched
++		unsigned int	port		: 1;	// bit 27		PORT ID matching enable
++		unsigned int	l7			: 1;	// bit 28		L7 matching enable
++		unsigned int	l4			: 1;	// bit 29		L4 matching enable
++		unsigned int	l3			: 1;	// bit 30		L3 matching enable
++		unsigned int	l2			: 1;	// bit 31		L2 matching enable
++#endif
++	} bits;
++} GMAC_MRxCR0_T;
++
++#define MR_L2_BIT			BIT(31)
++#define MR_L3_BIT			BIT(30)
++#define MR_L4_BIT			BIT(29)
++#define MR_L7_BIT			BIT(28)
++#define MR_PORT_BIT			BIT(27)
++#define MR_PRIORITY_BIT		BIT(26)
++#define MR_DA_BIT			BIT(23)
++#define MR_SA_BIT			BIT(22)
++#define MR_ETHER_TYPE_BIT	BIT(21)
++#define MR_VLAN_BIT			BIT(20)
++#define MR_PPPOE_BIT		BIT(19)
++#define MR_IP_VER_BIT		BIT(15)
++#define MR_IP_HDR_LEN_BIT	BIT(14)
++#define MR_FLOW_LABLE_BIT	BIT(13)
++#define MR_TOS_TRAFFIC_BIT	BIT(12)
++#define MR_SPR_BIT(x)		BIT(x)
++#define MR_SPR_BITS		0xff
++
++/**********************************************************************
++ * GMAC Matching Rule Control Register 1
++ * GMAC0 offset 0x807C
++ * GMAC1 offset 0xC07C
++ **********************************************************************/
++ typedef union
++{
++	unsigned int bits32;
++	struct bit_807C
++	{
++#if (BIG_ENDIAN==1)
++		unsigned int	sip			: 1;	// bit 31		Srce IP
++		unsigned int	sip_netmask	: 7;	// bit 30:24	Srce IP net mask, number of mask bits
++		unsigned int	dip			: 1;	// bit 23		Dest IP
++		unsigned int	dip_netmask	: 7;	// bit 22:16	Dest IP net mask, number of mask bits
++		unsigned int    l4_byte0_15	: 16;	// bit 15: 0
++#else
++		unsigned int    l4_byte0_15	: 16;	// bit 15: 0
++		unsigned int	dip_netmask	: 7;	// bit 22:16	Dest IP net mask, number of mask bits
++		unsigned int	dip			: 1;	// bit 23		Dest IP
++		unsigned int	sip_netmask	: 7;	// bit 30:24	Srce IP net mask, number of mask bits
++		unsigned int	sip			: 1;	// bit 31		Srce IP
++#endif
++	} bits;
++} GMAC_MRxCR1_T;
++
++/**********************************************************************
++ * GMAC Matching Rule Control Register 2
++ * GMAC0 offset 0x8080
++ * GMAC1 offset 0xC080
++ **********************************************************************/
++ typedef union
++{
++	unsigned int bits32;
++	struct bit_8080
++	{
++#if (BIG_ENDIAN==1)
++		unsigned int    l4_byte16_24: 8;	// bit 31: 24
++		unsigned int    l7_byte0_23	: 24;	// bit 23:0
++#else
++		unsigned int    l7_byte0_23	: 24;	// bit 23:0
++		unsigned int    l4_byte16_24: 8;	// bit 31: 24
++#endif
++	} bits;
++} GMAC_MRxCR2_T;
++
++
++/**********************************************************************
++ * GMAC Support registers
++ * GMAC0 offset 0x80A8
++ * GMAC1 offset 0xC0A8
++ **********************************************************************/
++ typedef union
++{
++	unsigned int bits32;
++	struct bit_80A8
++	{
++#if (BIG_ENDIAN==1)
++		unsigned int    reserved: 21;	// bit 31:11
++		unsigned int    swap	: 3;	// bit 10:8		Swap
++		unsigned int    protocol: 8;	// bit 7:0		Supported protocol
++#else
++		unsigned int    protocol: 8;	// bit 7:0		Supported protocol
++		unsigned int    swap	: 3;	// bit 10:8		Swap
++		unsigned int    reserved: 21;	// bit 31:11
++#endif
++	} bits;
++} GMAC_SPR_T;
++
++/**********************************************************************
++ * GMAC_AHB_WEIGHT registers
++ * GMAC0 offset 0x80C8
++ * GMAC1 offset 0xC0C8
++ **********************************************************************/
++ typedef union
++{
++	unsigned int bits32;
++	struct bit_80C8
++	{
++#if (BIG_ENDIAN==1)
++		unsigned int    reserved		: 7;	// 31:25
++		unsigned int    tqDV_threshold	: 5;	// 24:20 DMA TqCtrl to Start tqDV FIFO Threshold
++		unsigned int    pre_req			: 5;	// 19:15 Rx Data Pre Request FIFO Threshold
++		unsigned int    tx_weight		: 5;	// 14:10
++		unsigned int    rx_weight		: 5;	// 9:5
++		unsigned int    hash_weight		: 5;	// 4:0
++#else
++		unsigned int    hash_weight		: 5;	// 4:0
++		unsigned int    rx_weight		: 5;	// 9:5
++		unsigned int    tx_weight		: 5;	// 14:10
++		unsigned int    pre_req			: 5;	// 19:15 Rx Data Pre Request FIFO Threshold
++		unsigned int    tqDV_threshold	: 5;	// 24:20 DMA TqCtrl to Start tqDV FIFO Threshold
++		unsigned int    reserved		: 7;	// 31:25
++#endif
++	} bits;
++} GMAC_AHB_WEIGHT_T;
++/**********************************************************************
++ * the register structure of GMAC
++ **********************************************************************/
++
++/**********************************************************************
++ * GMAC RX FLTR
++ * GMAC0 Offset 0xA00C
++ * GMAC1 Offset 0xE00C
++ **********************************************************************/
++typedef union
++{
++	unsigned int bits32;
++	struct bit1_000c
++	{
++#if (BIG_ENDIAN==1)
++		unsigned int 				: 27;
++		unsigned int error			:  1;	/* enable receive of all error frames */
++		unsigned int promiscuous	:  1;   /* enable receive of all frames */
++		unsigned int broadcast		:  1;	/* enable receive of broadcast frames */
++		unsigned int multicast		:  1;	/* enable receive of multicast frames that pass multicast filter */
++		unsigned int unicast		:  1;	/* enable receive of unicast frames that are sent to STA address */
++#else
++		unsigned int unicast		:  1;	/* enable receive of unicast frames that are sent to STA address */
++		unsigned int multicast		:  1;	/* enable receive of multicast frames that pass multicast filter */
++		unsigned int broadcast		:  1;	/* enable receive of broadcast frames */
++		unsigned int promiscuous	:  1;   /* enable receive of all frames */
++		unsigned int error			:  1;	/* enable receive of all error frames */
++		unsigned int 				: 27;
++#endif
++	} bits;
++} GMAC_RX_FLTR_T;
++
++/**********************************************************************
++ * GMAC Configuration 0
++ * GMAC0 Offset 0xA018
++ * GMAC1 Offset 0xE018
++ **********************************************************************/
++typedef union
++{
++	unsigned int bits32;
++	struct bit1_0018
++	{
++#if (BIG_ENDIAN==1)
++		unsigned int reserved		:  2;	// 31
++		unsigned int port1_chk_classq :  1;	// 29
++		unsigned int port0_chk_classq :  1;	// 28
++		unsigned int port1_chk_toeq	:  1;	// 27
++		unsigned int port0_chk_toeq	:  1;	// 26
++		unsigned int port1_chk_hwq	:  1;	// 25
++		unsigned int port0_chk_hwq	:  1;	// 24
++		unsigned int rx_err_detect  :  1;	// 23
++		unsigned int ipv6_exthdr_order: 1;	// 22
++		unsigned int rxc_inv		:  1;	// 21
++		unsigned int rgmm_edge		:  1;	// 20
++        unsigned int rx_tag_remove  :  1;   /* 19: Remove Rx VLAN tag */
++        unsigned int ipv6_rx_chksum :  1;   /* 18: IPv6 RX Checksum enable */
++        unsigned int ipv4_rx_chksum :  1;   /* 17: IPv4 RX Checksum enable */
++        unsigned int rgmii_en       :  1;   /* 16: RGMII in-band status enable */
++		unsigned int tx_fc_en		:  1;	/* 15: TX flow control enable */
++		unsigned int rx_fc_en		:  1;	/* 14: RX flow control enable */
++		unsigned int sim_test		:  1;	/* 13: speed up timers in simulation */
++		unsigned int dis_col		:  1;	/* 12: disable 16 collisions abort function */
++		unsigned int dis_bkoff		:  1;	/* 11: disable back-off function */
++		unsigned int max_len		:  3;	/* 8-10 maximum receive frame length allowed */
++		unsigned int adj_ifg		:  4;	/* 4-7: adjust IFG from 96+/-56 */
++        unsigned int flow_ctrl      :  1;   /* 3: flow control also trigged by Rx queues */
++		unsigned int loop_back		:  1;	/* 2: transmit data loopback enable */
++		unsigned int dis_rx			:  1;	/* 1: disable receive */
++		unsigned int dis_tx			:  1;	/* 0: disable transmit */
++#else
++		unsigned int dis_tx			:  1;	/* 0: disable transmit */
++		unsigned int dis_rx			:  1;	/* 1: disable receive */
++		unsigned int loop_back		:  1;	/* 2: transmit data loopback enable */
++        unsigned int flow_ctrl      :  1;   /* 3: flow control also trigged by Rx queues */
++		unsigned int adj_ifg		:  4;	/* 4-7: adjust IFG from 96+/-56 */
++		unsigned int max_len		:  3;	/* 8-10 maximum receive frame length allowed */
++		unsigned int dis_bkoff		:  1;	/* 11: disable back-off function */
++		unsigned int dis_col		:  1;	/* 12: disable 16 collisions abort function */
++		unsigned int sim_test		:  1;	/* 13: speed up timers in simulation */
++		unsigned int rx_fc_en		:  1;	/* 14: RX flow control enable */
++		unsigned int tx_fc_en		:  1;	/* 15: TX flow control enable */
++        unsigned int rgmii_en       :  1;   /* 16: RGMII in-band status enable */
++        unsigned int ipv4_rx_chksum :  1;   /* 17: IPv4 RX Checksum enable */
++        unsigned int ipv6_rx_chksum :  1;   /* 18: IPv6 RX Checksum enable */
++        unsigned int rx_tag_remove  :  1;   /* 19: Remove Rx VLAN tag */
++		unsigned int rgmm_edge		:  1;	// 20
++		unsigned int rxc_inv		:  1;	// 21
++		unsigned int ipv6_exthdr_order: 1;	// 22
++		unsigned int rx_err_detect  :  1;	// 23
++		unsigned int port0_chk_hwq	:  1;	// 24
++		unsigned int port1_chk_hwq	:  1;	// 25
++		unsigned int port0_chk_toeq	:  1;	// 26
++		unsigned int port1_chk_toeq	:  1;	// 27
++		unsigned int port0_chk_classq :  1;	// 28
++		unsigned int port1_chk_classq :  1;	// 29
++		unsigned int reserved		:  2;	// 31
++#endif
++	} bits;
++} GMAC_CONFIG0_T;
++
++/**********************************************************************
++ * GMAC Configuration 1
++ * GMAC0 Offset 0xA01C
++ * GMAC1 Offset 0xE01C
++ **********************************************************************/
++typedef union
++{
++	unsigned int bits32;
++	struct bit1_001c
++	{
++#if (BIG_ENDIAN==1)
++		unsigned int reserved		: 16;
++		unsigned int rel_threshold	: 8;	/* flow control release threshold */
++		unsigned int set_threshold	: 8; 	/* flow control set threshold */
++#else
++		unsigned int set_threshold	: 8; 	/* flow control set threshold */
++		unsigned int rel_threshold	: 8;	/* flow control release threshold */
++		unsigned int reserved		: 16;
++#endif
++	} bits;
++} GMAC_CONFIG1_T;
++
++#define GMAC_FLOWCTRL_SET_MAX		32
++#define GMAC_FLOWCTRL_SET_MIN		0
++#define GMAC_FLOWCTRL_RELEASE_MAX	32
++#define GMAC_FLOWCTRL_RELEASE_MIN	0
++
++/**********************************************************************
++ * GMAC Configuration 2
++ * GMAC0 Offset 0xA020
++ * GMAC1 Offset 0xE020
++ **********************************************************************/
++typedef union
++{
++	unsigned int bits32;
++	struct bit1_0020
++	{
++#if (BIG_ENDIAN==1)
++		unsigned int rel_threshold	: 16;	/* flow control release threshold */
++		unsigned int set_threshold	: 16; 	/* flow control set threshold */
++#else
++		unsigned int set_threshold	: 16; 	/* flow control set threshold */
++		unsigned int rel_threshold	: 16;	/* flow control release threshold */
++#endif
++	} bits;
++} GMAC_CONFIG2_T;
++
++/**********************************************************************
++ * GMAC Configuration 3
++ * GMAC0 Offset 0xA024
++ * GMAC1 Offset 0xE024
++ **********************************************************************/
++typedef union
++{
++	unsigned int bits32;
++	struct bit1_0024
++	{
++#if (BIG_ENDIAN==1)
++		unsigned int rel_threshold	: 16;	/* flow control release threshold */
++		unsigned int set_threshold	: 16; 	/* flow control set threshold */
++#else
++		unsigned int set_threshold	: 16; 	/* flow control set threshold */
++		unsigned int rel_threshold	: 16;	/* flow control release threshold */
++#endif
++	} bits;
++} GMAC_CONFIG3_T;
++
++
++/**********************************************************************
++ * GMAC STATUS
++ * GMAC0 Offset 0xA02C
++ * GMAC1 Offset 0xE02C
++ **********************************************************************/
++typedef union
++{
++	unsigned int bits32;
++	struct bit1_002c
++	{
++#if (BIG_ENDIAN==1)
++		unsigned int 				: 25;
++		unsigned int mii_rmii		:  2;   /* PHY interface type */
++		unsigned int reserved		:  1;
++		unsigned int duplex			:  1;	/* duplex mode */
++		unsigned int speed			:  2;	/* link speed(00->2.5M 01->25M 10->125M) */
++		unsigned int link			:  1;	/* link status */
++#else
++		unsigned int link			:  1;	/* link status */
++		unsigned int speed			:  2;	/* link speed(00->2.5M 01->25M 10->125M) */
++		unsigned int duplex			:  1;	/* duplex mode */
++		unsigned int reserved		:  1;
++		unsigned int mii_rmii		:  2;   /* PHY interface type */
++		unsigned int 				: 25;
++#endif
++	} bits;
++} GMAC_STATUS_T;
++
++#define GMAC_SPEED_10			0
++#define GMAC_SPEED_100			1
++#define GMAC_SPEED_1000			2
++
++#define GMAC_PHY_MII			0
++#define GMAC_PHY_GMII			1
++#define GMAC_PHY_RGMII_100		2
++#define GMAC_PHY_RGMII_1000		3
++
++/**********************************************************************
++ * Queue Header
++ *	(1) TOE Queue Header
++ *	(2) Non-TOE Queue Header
++ *	(3) Interrupt Queue Header
++ *
++ * memory Layout
++ *	TOE Queue Header
++ *	 0x60003000 +---------------------------+ 0x0000
++ *				|     TOE Queue 0 Header	|
++ *				|         8 * 4 Bytes	    |
++ *				+---------------------------+ 0x0020
++ *				|     TOE Queue 1 Header  	|
++ *				|         8 * 4 Bytes		|
++ *				+---------------------------+ 0x0040
++ *				|   	......  			|
++ *				|      						|
++ *				+---------------------------+
++ *
++ *	Non TOE Queue Header
++ *	 0x60002000 +---------------------------+ 0x0000
++ *				|   Default Queue 0 Header  |
++ *				|         2 * 4 Bytes		|
++ *				+---------------------------+ 0x0008
++ *				|   Default Queue 1 Header	|
++ *				|         2 * 4 Bytes		|
++ *				+---------------------------+ 0x0010
++ *				|   Classification Queue 0	|
++ *				|      	  2 * 4 Bytes		|
++ *				+---------------------------+
++ *				|   Classification Queue 1	|
++ *				|      	  2 * 4 Bytes		|
++ *				+---------------------------+ (n * 8 + 0x10)
++ *				|   		...				|
++ *				|      	  2 * 4 Bytes		|
++ *				+---------------------------+ (13 * 8 + 0x10)
++ *				|   Classification Queue 13	|
++ *				|      	  2 * 4 Bytes		|
++ *				+---------------------------+ 0x80
++ * 				|      Interrupt Queue 0	|
++ *				|      	  2 * 4 Bytes		|
++ *				+---------------------------+
++ * 				|      Interrupt Queue 1	|
++ *				|      	  2 * 4 Bytes		|
++ *				+---------------------------+
++ * 				|      Interrupt Queue 2	|
++ *				|      	  2 * 4 Bytes		|
++ *				+---------------------------+
++ * 				|      Interrupt Queue 3	|
++ *				|      	  2 * 4 Bytes		|
++ *				+---------------------------+
++ *
++ **********************************************************************/
++#define TOE_QUEUE_HDR_ADDR(n)		(TOE_TOE_QUE_HDR_BASE + n * 32)
++#define TOE_Q_HDR_AREA_END			(TOE_QUEUE_HDR_ADDR(TOE_TOE_QUEUE_MAX+1))
++#define TOE_DEFAULT_Q0_HDR_BASE		(TOE_NONTOE_QUE_HDR_BASE + 0x00)
++#define TOE_DEFAULT_Q1_HDR_BASE		(TOE_NONTOE_QUE_HDR_BASE + 0x08)
++#define TOE_CLASS_Q_HDR_BASE		(TOE_NONTOE_QUE_HDR_BASE + 0x10)
++#define TOE_INTR_Q_HDR_BASE			(TOE_NONTOE_QUE_HDR_BASE + 0x80)
++#define INTERRUPT_QUEUE_HDR_ADDR(n)	(TOE_INTR_Q_HDR_BASE + n * 8)
++#define NONTOE_Q_HDR_AREA_END		(INTERRUPT_QUEUE_HDR_ADDR(TOE_INTR_QUEUE_MAX+1))
++/**********************************************************************
++ * TOE Queue Header Word 0
++ **********************************************************************/
++typedef union
++{
++	unsigned int bits32;
++	unsigned int base_size;
++} TOE_QHDR0_T;
++
++#define TOE_QHDR0_BASE_MASK 	(~0x0f)
++
++/**********************************************************************
++ * TOE Queue Header Word 1
++ **********************************************************************/
++typedef union
++{
++	unsigned int bits32;
++	struct bit_qhdr1
++	{
++#if (BIG_ENDIAN==1)
++
++		unsigned int wptr			: 16;	// bit 31:16
++		unsigned int rptr			: 16;	// bit 15:0
++#else
++		unsigned int rptr			: 16;	// bit 15:0
++		unsigned int wptr			: 16;	// bit 31:16
++#endif
++	} bits;
++} TOE_QHDR1_T;
++
++/**********************************************************************
++ * TOE Queue Header Word 2
++ **********************************************************************/
++typedef union
++{
++	unsigned int bits32;
++	struct bit_qhdr2
++	{
++#if (BIG_ENDIAN==1)
++
++		unsigned int usd			: 1;	// bit 31		0: if no data assembled yet
++		unsigned int ctl			: 1;	// bit 30		1: have control flag bits (except ack)
++		unsigned int osq			: 1;	// bit 29		1: out of sequence
++		unsigned int sat			: 1;	// bit 28		1: SeqCnt > SeqThreshold, or AckCnt > AckThreshold
++		unsigned int ip_opt			: 1;	// bit 27		1: have IPV4 option or IPV6 Extension header
++		unsigned int tcp_opt		: 1;	// bit 26		1: Have TCP option
++		unsigned int abn			: 1;	// bit 25		1: Abnormal case Found
++		unsigned int dack			: 1;	// bit 24		1: Duplicated ACK
++		unsigned int reserved		: 7;	// bit 23:17
++		unsigned int TotalPktSize	: 17;	// bit 16: 0	Total packet size
++#else
++		unsigned int TotalPktSize	: 17;	// bit 16: 0	Total packet size
++		unsigned int reserved		: 7;	// bit 23:17
++		unsigned int dack			: 1;	// bit 24		1: Duplicated ACK
++		unsigned int abn			: 1;	// bit 25		1: Abnormal case Found
++		unsigned int tcp_opt		: 1;	// bit 26		1: Have TCP option
++		unsigned int ip_opt			: 1;	// bit 27		1: have IPV4 option or IPV6 Extension header
++		unsigned int sat			: 1;	// bit 28		1: SeqCnt > SeqThreshold, or AckCnt > AckThreshold
++		unsigned int osq			: 1;	// bit 29		1: out of sequence
++		unsigned int ctl			: 1;	// bit 30		1: have control flag bits (except ack)
++		unsigned int usd			: 1;	// bit 31		0: if no data assembled yet
++#endif
++	} bits;
++} TOE_QHDR2_T;
++
++/**********************************************************************
++ * TOE Queue Header Word 3
++ **********************************************************************/
++typedef union
++{
++	unsigned int bits32;
++	unsigned int seq_num;
++} TOE_QHDR3_T;
++
++/**********************************************************************
++ * TOE Queue Header Word 4
++ **********************************************************************/
++typedef union
++{
++	unsigned int bits32;
++	unsigned int ack_num;
++} TOE_QHDR4_T;
++
++/**********************************************************************
++ * TOE Queue Header Word 5
++ **********************************************************************/
++typedef union
++{
++	unsigned int bits32;
++	struct bit_qhdr5
++	{
++#if (BIG_ENDIAN==1)
++
++		unsigned int SeqCnt		: 16;	// bit 31:16
++		unsigned int AckCnt		: 16;	// bit 15:0
++#else
++		unsigned int AckCnt		: 16;	// bit 15:0
++		unsigned int SeqCnt		: 16;	// bit 31:16
++#endif
++	} bits;
++} TOE_QHDR5_T;
++
++/**********************************************************************
++ * TOE Queue Header Word 6
++ **********************************************************************/
++typedef union
++{
++	unsigned int bits32;
++	struct bit_qhdr6
++	{
++#if (BIG_ENDIAN==1)
++
++		unsigned int MaxPktSize	: 14;	// bit 31:18
++		unsigned int iq_num		: 2;	// bit 17:16
++		unsigned int WinSize	: 16;	// bit 15:0
++#else
++		unsigned int WinSize	: 16;	// bit 15:0
++		unsigned int iq_num		: 2;	// bit 17:16
++		unsigned int MaxPktSize	: 14;	// bit 31:18
++#endif
++	} bits;
++} TOE_QHDR6_T;
++
++/**********************************************************************
++ * TOE Queue Header Word 7
++ **********************************************************************/
++typedef union
++{
++	unsigned int bits32;
++	struct bit_qhdr7
++	{
++#if (BIG_ENDIAN==1)
++
++		unsigned int SeqThreshold	: 16;	// bit 31:16
++		unsigned int AckThreshold	: 16;	// bit 15:0
++#else
++		unsigned int AckThreshold	: 16;	// bit 15:0
++		unsigned int SeqThreshold	: 16;	// bit 31:16
++#endif
++	} bits;
++} TOE_QHDR7_T;
++
++/**********************************************************************
++ * TOE Queue Header
++ **********************************************************************/
++typedef struct
++{
++	TOE_QHDR0_T		word0;
++	TOE_QHDR1_T		word1;
++	TOE_QHDR2_T		word2;
++	TOE_QHDR3_T		word3;
++	TOE_QHDR4_T		word4;
++	TOE_QHDR5_T		word5;
++	TOE_QHDR6_T		word6;
++	TOE_QHDR7_T		word7;
++} TOE_QHDR_T;
++
++/**********************************************************************
++ * NONTOE Queue Header Word 0
++ **********************************************************************/
++typedef union
++{
++	unsigned int bits32;
++	unsigned int base_size;
++} NONTOE_QHDR0_T;
++
++#define NONTOE_QHDR0_BASE_MASK 	(~0x0f)
++
++/**********************************************************************
++ * NONTOE Queue Header Word 1
++ **********************************************************************/
++typedef union
++{
++	unsigned int bits32;
++	struct bit_nonqhdr1
++	{
++#if (BIG_ENDIAN==1)
++
++		unsigned int wptr			: 16;	// bit 31:16
++		unsigned int rptr			: 16;	// bit 15:0
++#else
++		unsigned int rptr			: 16;	// bit 15:0
++		unsigned int wptr			: 16;	// bit 31:16
++#endif
++	} bits;
++} NONTOE_QHDR1_T;
++
++/**********************************************************************
++ * Non-TOE Queue Header
++ **********************************************************************/
++typedef struct
++{
++	NONTOE_QHDR0_T		word0;
++	NONTOE_QHDR1_T		word1;
++} NONTOE_QHDR_T;
++
++/**********************************************************************
++ * Interrupt Queue Header Word 0
++ **********************************************************************/
++typedef union
++{
++	unsigned int bits32;
++	struct bit_intrqhdr0
++	{
++#if (BIG_ENDIAN==1)
++
++		unsigned int wptr		: 16;	// bit 31:16	Write Pointer where hw stopped
++		unsigned int win_size	: 16;	// bit 15:0 	Descriptor Ring Size
++#else
++		unsigned int win_size	: 16;	// bit 15:0 	Descriptor Ring Size
++		unsigned int wptr		: 16;	// bit 31:16	Write Pointer where hw stopped
++#endif
++	} bits;
++} INTR_QHDR0_T;
++
++/**********************************************************************
++ * Interrupt Queue Header Word 1
++ **********************************************************************/
++typedef union
++{
++	unsigned int bits32;
++	struct bit_intrqhdr1
++	{
++#if (BIG_ENDIAN==1)
++
++		unsigned int ctl			: 1;	// bit 31		1: have control flag bits (except ack)
++		unsigned int osq			: 1;	// bit 30		1: out of sequence
++		unsigned int sat			: 1;	// bit 29		1: SeqCnt > SeqThreshold, or AckCnt > AckThreshold
++		unsigned int ip_opt			: 1;	// bit 28		1: have IPV4 option or IPV6 Extension header
++		unsigned int tcp_opt		: 1;	// bit 27		1: Have TCP option
++		unsigned int abn			: 1;	// bit 26		1: Abnormal case Found
++		unsigned int dack			: 1;	// bit 25		1: Duplicated ACK
++		unsigned int tcp_qid		: 8;	// bit 24:17	TCP Queue ID
++		unsigned int TotalPktSize	: 17;	// bit 16: 0	Total packet size
++#else
++		unsigned int TotalPktSize	: 17;	// bit 16: 0	Total packet size
++		unsigned int tcp_qid		: 8;	// bit 24:17	TCP Queue ID
++		unsigned int dack			: 1;	// bit 25		1: Duplicated ACK
++		unsigned int abn			: 1;	// bit 26		1: Abnormal case Found
++		unsigned int tcp_opt		: 1;	// bit 27		1: Have TCP option
++		unsigned int ip_opt			: 1;	// bit 28		1: have IPV4 option or IPV6 Extension header
++		unsigned int sat			: 1;	// bit 29		1: SeqCnt > SeqThreshold, or AckCnt > AckThreshold
++		unsigned int osq			: 1;	// bit 30		1: out of sequence
++		unsigned int ctl			: 1;	// bit 31		1: have control flag bits (except ack)
++#endif
++	} bits;
++} INTR_QHDR1_T;
++
++/**********************************************************************
++ * Interrupt Queue Header Word 2
++ **********************************************************************/
++typedef union
++{
++	unsigned int bits32;
++	unsigned int seq_num;
++} INTR_QHDR2_T;
++
++/**********************************************************************
++ * Interrupt Queue Header Word 3
++ **********************************************************************/
++typedef union
++{
++	unsigned int bits32;
++	unsigned int ack_num;
++} INTR_QHDR3_T;
++
++/**********************************************************************
++ * Interrupt Queue Header Word 4
++ **********************************************************************/
++typedef union
++{
++	unsigned int bits32;
++	struct bit_intrqhdr4
++	{
++#if (BIG_ENDIAN==1)
++
++		unsigned int SeqCnt		: 16;	// bit 31:16	Seq# change since last seq# intr.
++		unsigned int AckCnt		: 16;	// bit 15:0     Ack# change since last ack# intr.
++#else
++		unsigned int AckCnt		: 16;	// bit 15:0		Ack# change since last ack# intr.
++		unsigned int SeqCnt		: 16;	// bit 31:16	Seq# change since last seq# intr.
++#endif
++	} bits;
++} INTR_QHDR4_T;
++
++/**********************************************************************
++ * Interrupt Queue Header
++ **********************************************************************/
++typedef struct
++{
++	INTR_QHDR0_T		word0;
++	INTR_QHDR1_T		word1;
++	INTR_QHDR2_T		word2;
++	INTR_QHDR3_T		word3;
++	INTR_QHDR4_T		word4;
++	unsigned int		word5;
++	unsigned int		word6;
++	unsigned int		word7;
++} INTR_QHDR_T;
++
++/**********************************************************************
++ * GMAC Conf
++ **********************************************************************/
++typedef struct gmac_conf {
++	struct net_device *dev;
++	int portmap;
++	int vid;
++	int flag;     /* 1: active  0: non-active */
++} sys_gmac_conf;
++
++/**********************************************************************
++ * GMAC private data
++ **********************************************************************/
++typedef struct {
++	unsigned int		rwptr_reg;
++	unsigned int		desc_base;
++	unsigned int		total_desc_num;
++	unsigned short		finished_idx;
++	GMAC_TXDESC_T		*curr_tx_desc;
++	GMAC_TXDESC_T		*curr_finished_desc;
++	struct sk_buff		*tx_skb[TX_DESC_NUM];
++	unsigned long		total_sent;
++	unsigned long		total_finished;
++	unsigned long		intr_cnt;
++} GMAC_SWTXQ_T;
++
++typedef struct {
++	unsigned int		desc_base;
++	unsigned long 		eof_cnt;
++} GMAC_HWTXQ_T;
++
++typedef struct gmac_private{
++	struct net_device	*dev;
++	unsigned int		existed;
++	unsigned int		port_id;	// 0 or 1
++	unsigned int		base_addr;
++	unsigned int		dma_base_addr;
++	unsigned char		*mac_addr1;
++	unsigned char		*mac_addr2;
++	unsigned int		swtxq_desc_base;
++	unsigned int		hwtxq_desc_base;
++	GMAC_SWTXQ_T		swtxq[TOE_SW_TXQ_NUM];
++	GMAC_HWTXQ_T		hwtxq[TOE_HW_TXQ_NUM];
++	NONTOE_QHDR_T		*default_qhdr;
++	unsigned int		default_desc_base;
++	unsigned int		default_desc_num;
++	unsigned int		rx_curr_desc;
++	DMA_RWPTR_T			rx_rwptr;
++	struct sk_buff		*curr_rx_skb;
++	dma_addr_t			default_desc_base_dma;
++	dma_addr_t			swtxq_desc_base_dma;
++	dma_addr_t			hwtxq_desc_base_dma;
++	unsigned int		irq;
++	unsigned int		flow_control_enable	;
++	unsigned int		pre_phy_status;
++	unsigned int		full_duplex_cfg;
++	unsigned int		speed_cfg;
++	unsigned int		auto_nego_cfg;
++	unsigned int		full_duplex_status;
++	unsigned int		speed_status;
++	unsigned int		phy_mode;	/* 0->MII 1->GMII 2->RGMII(10/100) 3->RGMII(1000) */
++	unsigned int		phy_addr;
++	unsigned int		intr0_enabled;	// 1: enabled
++	unsigned int		intr1_enabled;	// 1: enabled
++	unsigned int		intr2_enabled;	// 1: enabled
++	unsigned int		intr3_enabled;	// 1: enabled
++	unsigned int		intr4_enabled;	// 1: enabled
++//	unsigned int		intr4_enabled_1;	// 1: enabled
++	unsigned int		intr0_selected;	// 1: selected
++	unsigned int		intr1_selected;	// 1: selected
++	unsigned int		intr2_selected;	// 1: selected
++	unsigned int		intr3_selected;	// 1: selected
++	unsigned int		intr4_selected;	// 1: selected
++	// void 				(*gmac_rcv_handler)(struct sk_buff *, int);
++	struct net_device_stats ifStatics;
++	unsigned long		txDerr_cnt[GMAC_NUM];
++	unsigned long		txPerr_cnt[GMAC_NUM];
++	unsigned long		RxDerr_cnt[GMAC_NUM];
++	unsigned long		RxPerr_cnt[GMAC_NUM];
++	unsigned int		isr_rx_cnt;
++	unsigned int		isr_tx_cnt;
++	unsigned long		rx_discard;
++	unsigned long		rx_error;
++	unsigned long		rx_mcast;
++	unsigned long		rx_bcast;
++	unsigned long		rx_status_cnt[8];
++	unsigned long		rx_chksum_cnt[8];
++	unsigned long		rx_sta1_ucast;	// for STA 1 MAC Address
++	unsigned long		rx_sta2_ucast;	// for STA 2 MAC Address
++	unsigned long		mib_full_cnt;
++	unsigned long		rx_pause_on_cnt;
++	unsigned long		tx_pause_on_cnt;
++	unsigned long		rx_pause_off_cnt;
++	unsigned long		tx_pause_off_cnt;
++	unsigned long		rx_overrun_cnt;
++	unsigned long		status_changed_cnt;
++	unsigned long		default_q_cnt;
++	unsigned long		hw_fq_empty_cnt;
++	unsigned long		sw_fq_empty_cnt;
++	unsigned long		default_q_intr_cnt;
++	pid_t               thr_pid;
++	wait_queue_head_t   thr_wait;
++	struct completion   thr_exited;
++    spinlock_t          lock;
++    int                 time_to_die;
++    int					operation;
++#ifdef SL351x_GMAC_WORKAROUND
++    unsigned long		short_frames_cnt;
++#endif
++}GMAC_INFO_T ;
++
++typedef struct toe_private {
++	unsigned int	swfq_desc_base;
++	unsigned int	hwfq_desc_base;
++	unsigned int	hwfq_buf_base;
++//	unsigned int	toe_desc_base[TOE_TOE_QUEUE_NUM];
++//	unsigned int	toe_desc_num;
++//	unsigned int	class_desc_base;
++//	unsigned int	class_desc_num;
++//	unsigned int	intr_desc_base;
++//	unsigned int	intr_desc_num;
++//	unsigned int	intr_buf_base;
++	DMA_RWPTR_T		fq_rx_rwptr;
++	GMAC_INFO_T		gmac[GMAC_NUM];
++	dma_addr_t		sw_freeq_desc_base_dma;
++	dma_addr_t		hw_freeq_desc_base_dma;
++	dma_addr_t		hwfq_buf_base_dma;
++	dma_addr_t		hwfq_buf_end_dma;
++//	dma_addr_t		toe_desc_base_dma[TOE_TOE_QUEUE_NUM];
++//	dma_addr_t		class_desc_base_dma;
++//	dma_addr_t		intr_desc_base_dma;
++//	dma_addr_t		intr_buf_base_dma;
++//	unsigned long	toe_iq_intr_full_cnt[TOE_INTR_QUEUE_NUM];
++//	unsigned long	toe_iq_intr_cnt[TOE_INTR_QUEUE_NUM];
++//	unsigned long	toe_q_intr_full_cnt[TOE_TOE_QUEUE_NUM];
++//	unsigned long	class_q_intr_full_cnt[TOE_CLASS_QUEUE_NUM];
++//	unsigned long	class_q_intr_cnt[TOE_CLASS_QUEUE_NUM];
++} TOE_INFO_T;
++
++extern TOE_INFO_T toe_private_data;
++
++#define GMAC_PORT0	0
++#define GMAC_PORT1	1
++/**********************************************************************
++ * PHY Definition
++ **********************************************************************/
++#define HPHY_ADDR   			0x01
++#define GPHY_ADDR   			0x02
++
++enum phy_state
++{
++    LINK_DOWN   = 0,
++    LINK_UP     = 1
++};
++
++/* transmit timeout value */
++
++#endif //_GMAC_SL351x_H
+--- /dev/null
++++ b/include/asm-arm/arch-sl2312/sl351x_hash_cfg.h
+@@ -0,0 +1,365 @@
++/*-----------------------------------------------------------------------------------
++*	sl351x_hash_cfg.h
++*
++*	Description:
++*	
++*	History:
++*
++*	9/14/2005	Gary Chen	Create
++*
++*-------------------------------------------------------------------------------------*/
++#ifndef _SL351x_HASH_CFG_H_
++#define _SL351x_HASH_CFG_H_	1
++
++// #define NAT_DEBUG_MSG	1
++// #define DEBUG_NAT_MIXED_HW_SW_TX	1
++#ifdef DEBUG_NAT_MIXED_HW_SW_TX
++	// #define NAT_DEBUG_LAN_HASH_TIMEOUT	1
++	// #define NAT_DEBUG_WAN_HASH_TIMEOUT	1
++#endif
++
++#define IPIV(a,b,c,d)		((a<<24)+(b<<16)+(c<<8)+d)
++#define	IPIV1(a)			((a>>24)&0xff)
++#define	IPIV2(a)			((a>>16)&0xff)
++#define IPIV3(a)			((a>>8)&0xff)
++#define IPIV4(a)			((a)&0xff)
++
++#define HASH_MAX_BYTES			64	// 128
++#define HASH_ACTION_DWORDS		9
++#define HASH_MAX_DWORDS			(HASH_MAX_BYTES / sizeof(u32))
++#define HASH_MAX_KEY_DWORD		(HASH_MAX_DWORDS - HASH_ACTION_DWORDS)
++#define HASH_INIT_KEY			0x534C4F52
++#define HASH_BITS				12	// 12 : Normal, 7: Simulation
++#define HASH_TOTAL_ENTRIES		(1 << HASH_BITS)
++#define HASH_MAX_ENTRIES		(1 << 12)
++#define HASH_TOE_ENTRIES		(HASH_TOTAL_ENTRIES >> 5)
++#define HASH_BITS_MASK			((1 << HASH_BITS) - 1)
++
++#define hash_lock(lock)			// spin_lock_bh(lock)
++#define hash_unlock(lock)		// spin_unlock_bh(lock)
++
++/*----------------------------------------------------------------------
++ *  special macro
++ ----------------------------------------------------------------------*/
++#define HASH_PUSH_WORD(cp, data)	{*cp++ = (((u16)(data))     ) & 0xff; 	\
++							 		*cp++ = (((u16)(data)) >> 8) & 0xff;} 
++#define HASH_PUSH_DWORD(cp, data)	{*cp++ = (u8)(((u32)(data))      ) & 0xff;	\
++							  		*cp++ = (u8)(((u32)(data)) >>  8) & 0xff;	\
++							  		*cp++ = (u8)(((u32)(data)) >> 16) & 0xff;	\
++							  		*cp++ = (u8)(((u32)(data)) >> 24) & 0xff;}
++#define HASH_PUSH_BYTE(cp, data)	{*cp++ = ((u8)(data)) & 0xff;}
++
++/*----------------------------------------------------------------------
++ *  key
++ ----------------------------------------------------------------------*/
++typedef struct {
++	u8		port;
++	u16		Ethertype;
++	u8		da[6];
++	u8		sa[6];
++	u16		pppoe_sid;	
++	u16		vlan_id;	
++	u8		ipv4_hdrlen;	
++	u8		ip_tos;	
++	u8		ip_protocol;	
++	u32		ipv6_flow_label;
++	u8		sip[16];
++	u8		dip[16];
++	//__u32			sip[4];
++	//__u32			dip[4];
++	u8		l4_bytes[24];
++	u8		l7_bytes[24];
++	u8		ipv6;	// 1: IPv6, 0: IPV4
++} ENTRY_KEY_T;
++
++/*----------------------------------------------------------------------
++ *  key for NAT
++ *	Note: packed
++ ----------------------------------------------------------------------*/
++typedef struct {
++	u16		Ethertype;		// not used
++	u8		port_id;
++	u8		rule_id;
++	u8		ip_protocol;
++	u8		reserved1;		// ip_tos, not used
++	u16		reserved2;		// not used
++	u32		sip;
++	u32		dip;
++	u16		sport;
++	u16		dport;
++} NAT_KEY_T;
++
++#define NAT_KEY_DWORD_SIZE	(sizeof(NAT_KEY_T)/sizeof(u32))
++#define NAT_KEY_SIZE		(sizeof(NAT_KEY_T))
++
++/*----------------------------------------------------------------------
++ *  key for NAT
++ *	Note: packed
++ ----------------------------------------------------------------------*/
++typedef struct {
++	u16		Ethertype;		// not used
++	u8		port_id;
++	u8		rule_id;
++	u8		ip_protocol;
++	u8		reserved1;		// ip_tos, not used
++	u16		reserved2;		// not used
++	u32		sip;
++	u32		dip;
++	u16		reserved3;
++	u16		protocol;
++	u16		reserved4;
++	u16		call_id;
++} GRE_KEY_T;
++
++#define GRE_KEY_DWORD_SIZE	(sizeof(GRE_KEY_T)/sizeof(u32))
++#define GRE_KEY_SIZE		(sizeof(GRE_KEY_T))
++/*----------------------------------------------------------------------
++ *  key present or not
++ ----------------------------------------------------------------------*/
++typedef struct {
++	u32		port			: 1;
++	u32		Ethertype		: 1;
++	u32		da				: 1;
++	u32		sa				: 1;
++	u32		pppoe_sid		: 1;	
++	u32		vlan_id			: 1;	
++	u32		ipv4_hdrlen		: 1;	
++	u32		ip_tos			: 1;
++	u32		ip_protocol		: 1;	
++	u32		ipv6_flow_label	: 1;
++	u32		sip				: 1;
++	u32		dip				: 1;
++	u32		l4_bytes_0_3	: 1;
++	u32		l4_bytes_4_7	: 1;
++	u32		l4_bytes_8_11	: 1;
++	u32		l4_bytes_12_15	: 1;
++	u32		l4_bytes_16_19	: 1;
++	u32		l4_bytes_20_23	: 1;
++	u32		l7_bytes_0_3	: 1;
++	u32		l7_bytes_4_7	: 1;
++	u32		l7_bytes_8_11	: 1;
++	u32		l7_bytes_12_15	: 1;
++	u32		l7_bytes_16_19	: 1;
++	u32		l7_bytes_20_23	: 1;
++	u32		reserved		: 8;
++} KEY_FIELD_T;
++
++/*----------------------------------------------------------------------
++ *  action
++ ----------------------------------------------------------------------*/
++typedef struct {
++	u32		reserved0	: 5;	// bit 0:4
++	u32		pppoe		: 2;	// bit 5:6
++	u32		vlan		: 2;	// bit 7:8
++	u32		sa			: 1;	// bit 9
++	u32		da			: 1;	// bit 10
++	u32		Dport		: 1;	// bit 11
++	u32		Sport		: 1;	// bit 12
++	u32		Dip			: 1;	// bit 13
++	u32		Sip			: 1;	// bit 14
++	u32		sw_id		: 1;	// bit 15
++	u32		frag		: 1;	// bit 16
++	u32		option		: 1;	// bit 17
++	u32		ttl_0		: 1;	// bit 18
++	u32		ttl_1		: 1;	// bit 19
++	u32		mtu			: 1;	// bit 20
++	u32		exception	: 1;	// bit 21
++	u32		srce_qid	: 1;	// bit 22
++	u32		discard		: 1;	// bit 23
++	u32		dest_qid	: 8;	// bit 24:31
++} ENTRY_ACTION_T;
++
++#define ACTION_DISCARD_BIT		BIT(23)
++#define ACTION_SRCE_QID_BIT		BIT(22)
++#define ACTION_EXCEPTION_BIT	BIT(21)
++#define ACTION_MTU_BIT			BIT(20)
++#define ACTION_TTL_1_BIT		BIT(19)
++#define ACTION_TTL_0_BIT		BIT(18)
++#define ACTION_IP_OPTION		BIT(17)
++#define ACTION_FRAG_BIT			BIT(16)
++#define ACTION_SWID_BIT			BIT(15)
++#define ACTION_SIP_BIT			BIT(14)
++#define ACTION_DIP_BIT			BIT(13)
++#define ACTION_SPORT_BIT		BIT(12)
++#define ACTION_DPORT_BIT		BIT(11)
++#define ACTION_DA_BIT			BIT(10)
++#define ACTION_SA_BIT			BIT(9)
++#define ACTION_VLAN_DEL_BIT		BIT(8)
++#define ACTION_VLAN_INS_BIT		BIT(7)
++#define ACTION_PPPOE_DEL_BIT	BIT(6)
++#define ACTION_PPPOE_INS_BIT	BIT(5)
++#define ACTION_L4_THIRD_BIT		BIT(4)
++#define ACTION_L4_FOURTH_BIT	BIT(3)
++
++#define NAT_ACTION_BITS			(ACTION_SRCE_QID_BIT  | ACTION_EXCEPTION_BIT |	\
++								ACTION_TTL_1_BIT | ACTION_TTL_0_BIT | 			\
++								ACTION_IP_OPTION | ACTION_FRAG_BIT |			\
++								ACTION_DA_BIT | ACTION_SA_BIT)
++#define NAT_LAN2WAN_ACTIONS		(NAT_ACTION_BITS | ACTION_SIP_BIT | ACTION_SPORT_BIT)
++#define NAT_WAN2LAN_ACTIONS		(NAT_ACTION_BITS | ACTION_DIP_BIT | ACTION_DPORT_BIT)
++#define NAT_PPPOE_LAN2WAN_ACTIONS	(NAT_LAN2WAN_ACTIONS | ACTION_PPPOE_INS_BIT)
++#define NAT_PPPOE_WAN2LAN_ACTIONS	(NAT_WAN2LAN_ACTIONS | ACTION_PPPOE_DEL_BIT)
++#define NAT_PPTP_LAN2WAN_ACTIONS	(NAT_ACTION_BITS | ACTION_SIP_BIT | ACTION_L4_FOURTH_BIT)
++#define NAT_PPTP_WAN2LAN_ACTIONS	(NAT_ACTION_BITS | ACTION_DIP_BIT | ACTION_L4_FOURTH_BIT)
++#define NAT_PPPOE_PPTP_LAN2WAN_ACTIONS	(NAT_PPTP_LAN2WAN_ACTIONS | ACTION_PPPOE_INS_BIT)
++#define NAT_PPPOE_PPTP_WAN2LAN_ACTIONS	(NAT_PPTP_WAN2LAN_ACTIONS | ACTION_PPPOE_DEL_BIT)
++								
++/*----------------------------------------------------------------------
++ *  parameter
++ ----------------------------------------------------------------------*/
++typedef struct {
++	u8		da[6];
++	u8		sa[6];
++	u16		vlan;	
++	u16  	pppoe;	
++	u32		Sip;
++	u32		Dip;
++	u16  	Sport;	
++	u16  	Dport;	
++	u16  	sw_id;	
++	u16  	mtu;	
++} ENTRY_PARAM_T;
++
++/*----------------------------------------------------------------------
++ *  Hash Entry
++ ----------------------------------------------------------------------*/
++typedef struct {
++	char			rule;
++	ENTRY_KEY_T		key;
++	KEY_FIELD_T		key_present;
++	ENTRY_ACTION_T	action;
++	ENTRY_PARAM_T	param;
++	int				index;
++	int				total_dwords;
++} HASH_ENTRY_T;
++
++/*----------------------------------------------------------------------
++ *  NAT Hash Entry
++ ----------------------------------------------------------------------*/
++typedef struct {
++	short	counter;
++	short	interval;
++} HASH_TIMEOUT_T;
++
++/*----------------------------------------------------------------------
++ *  NAT Hash Entry for TCP/UDP protocol
++ ----------------------------------------------------------------------*/
++typedef struct {
++	NAT_KEY_T			key;
++	union {
++		u32				dword;
++		ENTRY_ACTION_T	bits;
++	} action;
++	ENTRY_PARAM_T		param;
++	HASH_TIMEOUT_T		tmo;	// used by software only, to use memory space efficiently
++} NAT_HASH_ENTRY_T;
++
++#define NAT_HASH_ENTRY_SIZE		(sizeof(NAT_HASH_ENTRY_T))
++
++/*----------------------------------------------------------------------
++ *  GRE Hash Entry for PPTP/GRE protocol
++ ----------------------------------------------------------------------*/
++typedef struct {
++	GRE_KEY_T			key;
++	union {
++		u32				dword;
++		ENTRY_ACTION_T	bits;
++	} action;
++	ENTRY_PARAM_T		param;
++	HASH_TIMEOUT_T		tmo;	// used by software only, to use memory space efficiently
++} GRE_HASH_ENTRY_T;
++
++#define GRE_HASH_ENTRY_SIZE		(sizeof(GRE_HASH_ENTRY_T))
++
++/*----------------------------------------------------------------------
++ *  External Variables
++ ----------------------------------------------------------------------*/
++extern char				hash_tables[HASH_TOTAL_ENTRIES][HASH_MAX_BYTES] __attribute__ ((aligned(16)));
++extern u32				hash_nat_owner_bits[HASH_TOTAL_ENTRIES/32];
++/*----------------------------------------------------------------------
++* hash_get_valid_flag
++*----------------------------------------------------------------------*/
++static inline int hash_get_valid_flag(int index)
++{
++	volatile u32 *hash_valid_bits_ptr = (volatile u32 *)TOE_V_BIT_BASE;
++
++#ifdef SL351x_GMAC_WORKAROUND
++	if (index >= (0x80 * 8) && index < (0x8c * 8))
++		return 1;
++#endif	
++	return (hash_valid_bits_ptr[index/32] & (1 << (index %32)));
++}
++
++/*----------------------------------------------------------------------
++* hash_get_nat_owner_flag
++*----------------------------------------------------------------------*/
++static inline int hash_get_nat_owner_flag(int index)
++{
++	return (hash_nat_owner_bits[index/32] & (1 << (index %32)));
++}
++
++/*----------------------------------------------------------------------
++* hash_validate_entry
++*----------------------------------------------------------------------*/
++static inline void hash_validate_entry(int index)
++{
++	volatile u32	*hash_valid_bits_ptr = (volatile u32 *)TOE_V_BIT_BASE;
++	register int	ptr = index/32, bits = 1 << (index %32);
++	
++	hash_valid_bits_ptr[ptr] |= bits;
++}
++
++/*----------------------------------------------------------------------
++* hash_invalidate_entry
++*----------------------------------------------------------------------*/
++static inline void hash_invalidate_entry(int index)
++{
++	volatile u32 *hash_valid_bits_ptr = (volatile u32 *)TOE_V_BIT_BASE;
++	register int	ptr = index/32, bits = 1 << (index %32);
++	
++	hash_valid_bits_ptr[ptr] &= ~(bits);
++}
++
++/*----------------------------------------------------------------------
++* hash_nat_enable_owner
++*----------------------------------------------------------------------*/
++static inline void hash_nat_enable_owner(int index)
++{
++	hash_nat_owner_bits[index/32] |= (1 << (index % 32));
++}
++
++/*----------------------------------------------------------------------
++* hash_nat_disable_owner
++*----------------------------------------------------------------------*/
++static inline void hash_nat_disable_owner(int index)
++{
++	hash_nat_owner_bits[index/32] &= ~(1 << (index % 32));
++}
++
++/*----------------------------------------------------------------------
++* hash_get_entry
++*----------------------------------------------------------------------*/
++static inline void *hash_get_entry(int index)
++{
++	return (void*) &hash_tables[index][0];
++}
++
++/*----------------------------------------------------------------------
++* Functions
++*----------------------------------------------------------------------*/
++extern int hash_add_entry(HASH_ENTRY_T *entry);
++extern void sl351x_hash_init(void);
++extern void hash_set_valid_flag(int index, int valid);
++extern void hash_set_nat_owner_flag(int index, int valid);
++extern void *hash_get_entry(int index);
++extern int hash_build_keys(u32 *destp, HASH_ENTRY_T *entry);
++extern void hash_build_nat_keys(u32 *destp, HASH_ENTRY_T *entry);
++extern int hash_write_entry(HASH_ENTRY_T *entry, u8 *key);
++extern int hash_add_entry(HASH_ENTRY_T *entry);
++extern	u16 hash_crc16(u16 crc, u8 *datap, u32 len);
++extern	u16 hash_gen_crc16(u8 *datap, u32 len);
++
++#endif // _SL351x_HASH_CFG_H_
++
++
++
+--- /dev/null
++++ b/include/asm-arm/arch-sl2312/sl351x_nat_cfg.h
+@@ -0,0 +1,211 @@
++/**************************************************************************
++* Copyright 2006 StorLink Semiconductors, Inc.  All rights reserved.                
++*--------------------------------------------------------------------------
++*	sl_nat_cfg.h
++*
++*	Description:
++*		- Define the Device Control Commands for NAT Configuration
++*	
++*	History:
++*
++*	4/28/2006	Gary Chen	Create
++*
++*-----------------------------------------------------------------------------*/
++#ifndef _SL351x_NAT_CFG_H_
++#define _SL351x_NAT_CFG_H_	1
++
++/*----------------------------------------------------------------------
++* Confiuration
++*----------------------------------------------------------------------*/
++#ifdef CONFIG_NETFILTER
++#define CONFIG_SL351x_NAT			1
++#undef CONFIG_SL351x_NAT
++#undef CONFIG_SL351x_SYSCTL
++#endif
++#define CONFIG_NAT_MAX_IP_NUM		4	// per device (eth0 or eth1)
++#define CONFIG_NAT_MAX_XPORT		64
++#define CONFIG_NAT_MAX_WRULE		16	// per Queue
++#define CONFIG_NAT_TXQ_NUM			4
++/*----------------------------------------------------------------------
++* Command set
++*----------------------------------------------------------------------*/
++#define SIOCDEVSL351x	SIOCDEVPRIVATE	// 0x89F0
++#define NATSSTATUS		0
++#define NATGSTATUS		1
++#define NATSETPORT		2
++#define NATGETPORT		3
++#define NATADDIP		4
++#define NATDELIP		5
++#define NATGETIP		6
++#define NATAXPORT		7
++#define NATDXPORT		8
++#define NATGXPORT		9
++#define NATSWEIGHT		10
++#define NATGWEIGHT		11
++#define NATAWRULE		12
++#define NATDWRULE		13
++#define NATGWRULE		14
++#define NATSDEFQ		15
++#define NATGDEFQ		16
++#define NATRMIPCFG		17		// remove IP config
++#define NATTESTENTRY	18
++#define NATSETMEM		19
++#define NATSHOWMEM		20
++/*----------------------------------------------------------------------
++* Command Structure
++*----------------------------------------------------------------------*/
++// Common Header
++typedef struct {
++	unsigned short		cmd;	// command ID
++	unsigned short		len;	// data length, excluding this header
++} NATCMD_HDR_T;
++
++// NATSSTATUS & NATGSTATUS commands
++typedef struct {
++	unsigned char		enable;
++} NAT_STATUS_T;	
++
++// NATSETPORT & NATGETPORT commands
++typedef struct {
++	unsigned char		portmap;
++} NAT_PORTCFG_T;
++
++typedef struct {
++	unsigned int		ipaddr;
++	unsigned int		netmask;
++} NAT_IP_ENTRY_T;
++
++// NATADDIP & NATDELIP commands
++typedef struct {
++	NAT_IP_ENTRY_T	entry;
++} NAT_IPCFG_T;
++
++// NATGETIP command
++typedef struct {
++	unsigned int	total;
++	NAT_IP_ENTRY_T	entry[CONFIG_NAT_MAX_IP_NUM];
++} NAT_IPCFG_ALL_T;
++
++typedef struct {
++	unsigned int		protocol;
++	unsigned short		sport_start;
++	unsigned short		sport_end;
++	unsigned short		dport_start;
++	unsigned short		dport_end;
++} NAT_XPORT_ENTRY_T;
++
++// NATAXPORT & NATDXPORT Commands
++typedef struct {
++	NAT_XPORT_ENTRY_T	entry;
++} NAT_XPORT_T;
++
++// NATGXPORT Command
++typedef struct {
++	unsigned int		total;
++	NAT_XPORT_ENTRY_T	entry[CONFIG_NAT_MAX_XPORT];
++} NAT_XPORT_ALL_T;
++
++// NATSWEIGHT & NATGWEIGHT Commands
++typedef struct {
++	unsigned char		weight[CONFIG_NAT_TXQ_NUM];
++} NAT_WEIGHT_T;
++
++typedef struct {
++	unsigned int		protocol;
++	unsigned int		sip_start;
++	unsigned int		sip_end;
++	unsigned int		dip_start;
++	unsigned int		dip_end;
++	unsigned short		sport_start;
++	unsigned short		sport_end;
++	unsigned short		dport_start;
++	unsigned short		dport_end;
++} NAT_WRULE_ENTRY_T;	
++
++// NATAWRULE & NATDWRULE Commands
++typedef struct {
++	unsigned int		qid;
++	NAT_WRULE_ENTRY_T	entry;
++} NAT_WRULE_T;
++
++// NATGWRULE Command
++typedef struct {
++	unsigned int		total;
++	NAT_WRULE_ENTRY_T	entry[CONFIG_NAT_MAX_WRULE];
++} NAT_WRULE_ALL_T;
++
++// NATSDEFQ & NATGDEFQ commands
++typedef struct {
++	unsigned int		qid;
++} NAT_QUEUE_T;	
++
++// NATTESTENTRY 
++typedef struct {
++	u_int16_t		cmd;	// command ID
++	u_int16_t		len;	// data length, excluding this header
++	u_int8_t		init_enable;
++} NAT_TESTENTRY_T;	
++	
++typedef union
++{
++	NAT_STATUS_T		status;
++	NAT_PORTCFG_T		portcfg;
++	NAT_IPCFG_T			ipcfg;
++	NAT_XPORT_T			xport;
++	NAT_WEIGHT_T		weight;
++	NAT_WRULE_T			wrule;
++	NAT_QUEUE_T			queue;
++	NAT_TESTENTRY_T init_entry;
++} NAT_REQ_E;
++	
++/*----------------------------------------------------------------------
++* NAT Configuration
++*	- Used by driver only
++*----------------------------------------------------------------------*/
++typedef struct {
++	unsigned int		enabled;
++	unsigned int		init_enabled;
++	unsigned int		tcp_udp_rule_id;
++	unsigned int		gre_rule_id;
++	unsigned int		lan_port;
++	unsigned int		wan_port;
++	unsigned int		default_hw_txq;
++	short				tcp_tmo_interval;
++	short				udp_tmo_interval;
++	short				gre_tmo_interval;
++	NAT_IPCFG_ALL_T		ipcfg[2];	// LAN/WAN port
++	NAT_XPORT_ALL_T		xport;
++	NAT_WEIGHT_T		weight;
++	NAT_WRULE_ALL_T		wrule[CONFIG_NAT_TXQ_NUM];
++} NAT_CFG_T;
++
++/*----------------------------------------------------------------------
++* NAT Control Block
++*	- Used by driver only
++*	- Stores LAN-IN or WAN-IN information
++*	- WAN-OUT and LAN-OUT driver use them to build up a hash entry
++*	- NOTES: To update this data structure, MUST take care of alignment issue
++*   -		 MUST make sure that the size of skbuff structure must 
++*            be larger than (40 + sizof(NAT_CB_T))
++*----------------------------------------------------------------------*/
++typedef struct {
++	unsigned short		tag;
++	unsigned char		sa[6];
++	unsigned int		sip;
++	unsigned int		dip;
++	unsigned short		sport;
++	unsigned short		dport;
++	unsigned char		pppoe_frame;
++	unsigned char		state;			// same to enum tcp_conntrack
++	unsigned char		reserved[2];
++} NAT_CB_T;
++
++#define NAT_CB_TAG		0x4C53	// "SL"
++#define NAT_CB_SIZE		sizeof(NAT_CB_T)
++// #define NAT_SKB_CB(skb)	(NAT_CB_T *)(((unsigned int)&((skb)->cb[40]) + 3) & ~3)  // for align 4
++#define NAT_SKB_CB(skb)	(NAT_CB_T *)&((skb)->cb[40])  // for align 4
++
++#endif // _SL351x_NAT_CFG_H_
++
++
++
+--- /dev/null
++++ b/include/asm-arm/arch-sl2312/sl351x_toe.h
+@@ -0,0 +1,88 @@
++/**************************************************************************
++* Copyright 2006 StorLink Semiconductors, Inc.  All rights reserved.
++*--------------------------------------------------------------------------
++* Name			: sl351x_toe.h
++* Description	:
++*		Define for TOE driver of Storlink SL351x
++*
++* History
++*
++*	Date		Writer		Description
++*----------------------------------------------------------------------------
++*				Xiaochong	Create
++*
++****************************************************************************/
++#ifndef __SL351x_TOE_H
++#define __SL351x_TOE_H	1
++#include 
++#include 
++#include 
++#include 
++#include 
++#include 
++/*
++ * TOE_CONN_T is data structure of tcp connection info, used at both
++ * device layer and kernel tcp layer
++ * skb is the jumbo frame
++ */
++
++struct toe_conn{
++	__u8	qid;		// connection qid 0~63.
++	__u8	ip_ver;		// 0: not used; 4: ipv4; 6: ipv6.
++	/* hash key of the connection */
++	__u16	source;
++	__u16	dest;
++	__u32	saddr[4];
++	__u32	daddr[4];
++
++	__u32	seq;
++	__u32	ack_seq;
++
++	/* these fields are used to set TOE QHDR */
++	__u32	ack_threshold;
++	__u32	seq_threshold;
++	__u16	max_pktsize;
++
++	/* used by sw toe, accumulated ack_seq of ack frames */
++	__u16	ack_cnt;
++	/* used by sw toe, accumulated data frames held at driver */
++	__u16	cur_pktsize;
++
++	__u8	status;
++#define	TCP_CONN_UNDEFINE		0X00
++#define	TCP_CONN_CREATION		0X01
++#define	TCP_CONN_CONNECTING		0X02
++#define	TCP_CONN_ESTABLISHED	0X04
++#define	TCP_CONN_RESET			0X08	// this is used for out-of-order
++                      			    	// or congestion window is small
++#define	TCP_CONN_CLOSING		0X10
++#define	TCP_CONN_CLOSED			0x11
++
++	__u16	hash_entry_index;	/* associated hash entry */
++
++	// one timer per connection. Otherwise all connections should be scanned
++	// in a timeout interrupt, and timeout interrupt is triggered no matter
++	// a connection is actually timeout or not.
++	struct timer_list	rx_timer;
++	unsigned long		last_rx_jiffies;
++	GMAC_INFO_T			*gmac;
++	struct net_device	*dev;
++
++	//	for generating pure ack frame.
++	struct ethhdr		l2_hdr;
++	struct iphdr		l3_hdr;
++
++	spinlock_t			conn_lock;
++	DMA_RWPTR_T			toeq_rwptr;
++	GMAC_RXDESC_T		*curr_desc;
++	struct sk_buff		*curr_rx_skb;
++};
++
++struct jumbo_frame {
++	struct sk_buff	*skb0;		// the head of jumbo frame
++	struct sk_buff	*tail;		// the tail of jumbo frame
++	struct iphdr	*iphdr0;	// the ip hdr of skb0.
++	struct tcphdr	*tcphdr0;	// the tcp hdr of skb0.
++};
++
++#endif // __SL351x_TOE_H
+--- a/drivers/net/Kconfig
++++ b/drivers/net/Kconfig
+@@ -2131,6 +2131,42 @@
+ 
+ 	  The safe and default value for this is N.
+ 
++config NET_GMAC
++	tristate "Storlink Gigabit Ethernet support"
++	depends on ARCH_SL2312
++	help
++	  This driver supports Storlink dual Gigabit Ethernet.
++
++config NET_SL2312
++	tristate "Storlink Gigabit Ethernet support"
++	depends on NET_GMAC
++	help
++	  This driver supports Storlink dual Gigabit Ethernet.
++
++config NET_SL351X
++	tristate "Storlink Lepus Gigabit Ethernet support"
++	depends on NET_GMAC
++	help
++	  This driver supports Storlink TOE and NAT dual Gigabit Ethernet.
++
++config SL2312_TSO
++	bool "Tx Segmentation Enable"
++	depends on NET_GMAC
++	help
++	  TBD
++
++config SL2312_MPAGE
++	bool "Tx Multipage Enable"
++	depends on NET_GMAC
++	help
++	  TBD
++
++config SL2312_RECVFILE
++	bool "Rx Multipage Enable"
++	depends on NET_GMAC
++	help
++	  TBD
++
+ config DL2K
+ 	tristate "D-Link DL2000-based Gigabit Ethernet support"
+ 	depends on PCI
+--- a/drivers/net/Makefile
++++ b/drivers/net/Makefile
+@@ -236,4 +236,8 @@
+ 
+ obj-$(CONFIG_FS_ENET) += fs_enet/
+ 
+-obj-$(CONFIG_NETXEN_NIC) += netxen/
++
++obj-$(CONFIG_NET_SL351X)+= sl351x_gmac.o sl351x_nat.o sl351x_hash.o sl351x_crc16.o sl351x_proc.o sl_switch.o
++obj-$(CONFIG_NET_SL2312)+= sl2312_emac.o
++
++
diff --git a/target/linux/storm/patches/003-gmac_one_phy.patch b/target/linux/storm/patches/003-gmac_one_phy.patch
new file mode 100644
index 0000000000..15a69c905e
--- /dev/null
+++ b/target/linux/storm/patches/003-gmac_one_phy.patch
@@ -0,0 +1,11 @@
+--- a/include/asm-arm/arch-sl2312/sl351x_gmac.h
++++ b/include/asm-arm/arch-sl2312/sl351x_gmac.h
+@@ -21,7 +21,7 @@
+ #undef BIG_ENDIAN
+ #define BIG_ENDIAN  				0
+ #define GMAC_DEBUG      			1
+-#define GMAC_NUM					2
++#define GMAC_NUM					1
+ //#define	L2_jumbo_frame				1
+ 
+ #define _PACKED_					__attribute__ ((aligned(1), packed))
diff --git a/target/linux/storm/patches/004-gmac_enable_napi.patch b/target/linux/storm/patches/004-gmac_enable_napi.patch
new file mode 100644
index 0000000000..ea374c41c9
--- /dev/null
+++ b/target/linux/storm/patches/004-gmac_enable_napi.patch
@@ -0,0 +1,81 @@
+--- a/drivers/net/sl351x_gmac.c
++++ b/drivers/net/sl351x_gmac.c
+@@ -68,9 +68,11 @@
+ #include 
+ #endif
+ 
++/* Enables NAPI unconditionally */
++#define CONFIG_SL_NAPI					1
++
+ // #define SL351x_TEST_WORKAROUND
+ #ifdef CONFIG_SL351x_NAT
+-#define CONFIG_SL_NAPI					1
+ #endif
+ #define GMAX_TX_INTR_DISABLED			1
+ #define DO_HW_CHKSUM					1
+@@ -124,12 +126,17 @@
+  *************************************************************/
+ static int	gmac_initialized = 0;
+ TOE_INFO_T toe_private_data;
+-//static int		do_again = 0;
++static int		do_again = 0;
+ spinlock_t gmac_fq_lock;
+ unsigned int FLAG_SWITCH;
+ 
+ static unsigned int     	next_tick = 3 * HZ;
+-static unsigned char    	eth_mac[CONFIG_MAC_NUM][6]= {{0x00,0x11,0x11,0x87,0x87,0x87}, {0x00,0x22,0x22,0xab,0xab,0xab}};
++static unsigned char    	eth_mac[CONFIG_MAC_NUM][6]= {
++		{0x00,0x11,0x11,0x87,0x87,0x87},
++#if GMAC_NUM != 1
++		{0x00,0x22,0x22,0xab,0xab,0xab}
++#endif
++};
+ 
+ #undef CONFIG_SL351x_RXTOE
+ extern NAT_CFG_T nat_cfg;
+@@ -2443,7 +2450,8 @@
+ 	toe = (TOE_INFO_T *)&toe_private_data;
+ //	handle NAPI
+ #ifdef CONFIG_SL_NAPI
+-if (storlink_ctl.pauseoff == 1)
++	/* XXX: check this, changed from 'storlink_ctl.pauseoff == 1' to if (1) */
++if (1)
+ {
+ /* disable GMAC interrupt */
+     //toe_gmac_disable_interrupt(tp->irq);
+@@ -2530,7 +2538,7 @@
+ 				{
+ 					if (likely(netif_rx_schedule_prep(dev)))
+         			{
+-        				unsigned int data32;
++        				// unsigned int data32;
+         				// disable GMAC-0 rx interrupt
+         				// class-Q & TOE-Q are implemented in future
+         				//data32 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_1_REG);
+@@ -2563,7 +2571,7 @@
+ 			{
+ 				if (likely(netif_rx_schedule_prep(dev)))
+         		{
+-        			unsigned int data32;
++        			// unsigned int data32;
+          			// disable GMAC-0 rx interrupt
+         			// class-Q & TOE-Q are implemented in future
+         			//data32 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_1_REG);
+@@ -4217,7 +4225,7 @@
+ 	GMAC_INFO_T			*tp = (GMAC_INFO_T *)dev->priv;
+ 	unsigned int		status4;
+ 	volatile DMA_RWPTR_T	fq_rwptr;
+-	int					max_cnt = TOE_SW_FREEQ_DESC_NUM;//TOE_SW_FREEQ_DESC_NUM = 64
++	// int					max_cnt = TOE_SW_FREEQ_DESC_NUM;//TOE_SW_FREEQ_DESC_NUM = 64
+ 	//unsigned long		rx_old_bytes;
+ 	struct net_device_stats *isPtr = (struct net_device_stats *)&tp->ifStatics;
+ 	//unsigned long long	rx_time;
+@@ -4479,7 +4487,7 @@
+ 
+ 	if (rwptr.bits.rptr == rwptr.bits.wptr)
+ 	{
+-		unsigned int data32;
++		// unsigned int data32;
+ 			//printk("%s:---[rwptr.bits.rptr == rwptr.bits.wptr]   rx_pkts_num=%d------rwptr.bits.rptr=0x%x------->Default_Q [rwptr.bits.rptr(SW)=0x%x,   rwptr.bits.wptr(HW) = 0x%x ]---->Free_Q(SW_HW) = 0x%8x \n",__func__,rx_pkts_num,rwptr.bits.rptr,rwptr.bits.rptr,rwptr.bits.wptr,fq_rwptr.bits32 );
+ 
+ 	    /* Receive descriptor is empty now */
diff --git a/target/linux/storm/patches/005-gmac_napi_mask_intrs.patch b/target/linux/storm/patches/005-gmac_napi_mask_intrs.patch
new file mode 100644
index 0000000000..f0b6375432
--- /dev/null
+++ b/target/linux/storm/patches/005-gmac_napi_mask_intrs.patch
@@ -0,0 +1,248 @@
+--- a/drivers/net/sl351x_gmac.c
++++ b/drivers/net/sl351x_gmac.c
+@@ -127,6 +127,7 @@
+ static int	gmac_initialized = 0;
+ TOE_INFO_T toe_private_data;
+ static int		do_again = 0;
++static int rx_poll_enabled;
+ spinlock_t gmac_fq_lock;
+ unsigned int FLAG_SWITCH;
+ 
+@@ -1065,7 +1066,8 @@
+ 	    tp->intr3_enabled = 	0xffffffff;
+ 	    tp->intr4_selected = 	GMAC0_INT_BITS | CLASS_RX_FULL_INT_BITS |
+ 	    						HWFQ_EMPTY_INT_BIT | SWFQ_EMPTY_INT_BIT;
+-	    tp->intr4_enabled = 	GMAC0_INT_BITS | SWFQ_EMPTY_INT_BIT;
++	    tp->intr4_enabled = 	GMAC0_INT_BITS | SWFQ_EMPTY_INT_BIT| GMAC0_RX_OVERRUN_INT_BIT;
++	    // GMAC0_TX_PAUSE_OFF_INT_BIT| GMAC0_MIB_INT_BIT;
+ 
+ 	    data = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_0_REG) & ~tp->intr0_selected;
+ 	    writel(data, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_0_REG);
+@@ -1115,7 +1117,7 @@
+ 	    	tp->intr3_enabled	|= 	0xffffffff;
+ 	    	tp->intr4_selected 	|= 	CLASS_RX_FULL_INT_BITS |
+ 	    							HWFQ_EMPTY_INT_BIT | SWFQ_EMPTY_INT_BIT;
+-	    	tp->intr4_enabled	|= 	SWFQ_EMPTY_INT_BIT;
++	    	tp->intr4_enabled	|= 	SWFQ_EMPTY_INT_BIT | GMAC1_RX_OVERRUN_INT_BIT;
+ 		}
+ 	    data = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_0_REG) | tp->intr0_selected;
+ 	    writel(data, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_0_REG);
+@@ -2408,7 +2410,7 @@
+ 	// unsigned short max_cnt=TOE_SW_FREEQ_DESC_NUM>>1;
+ 
+ 	fq_rwptr.bits32 = readl(TOE_GLOBAL_BASE + GLOBAL_SWFQ_RWPTR_REG);
+-	spin_lock_irqsave(&gmac_fq_lock, flags);
++	// spin_lock_irqsave(&gmac_fq_lock, flags);
+ 	//while ((max_cnt--) && (unsigned short)RWPTR_ADVANCE_ONE(fq_rwptr.bits.wptr,
+ 	//				TOE_SW_FREEQ_DESC_NUM) != fq_rwptr.bits.rptr) {
+ 	while ((unsigned short)RWPTR_ADVANCE_ONE(fq_rwptr.bits.wptr,
+@@ -2428,10 +2430,47 @@
+ 		SET_WPTR(TOE_GLOBAL_BASE+GLOBAL_SWFQ_RWPTR_REG, fq_rwptr.bits.wptr);
+ 		toe_private_data.fq_rx_rwptr.bits32 = fq_rwptr.bits32;
+ 	}
+-	spin_unlock_irqrestore(&gmac_fq_lock, flags);
++	// spin_unlock_irqrestore(&gmac_fq_lock, flags);
+ }
+ // EXPORT_SYMBOL(toe_gmac_fill_free_q);
+ 
++static void gmac_registers(const char *message)
++{
++	unsigned int		status0;
++	unsigned int		status1;
++	unsigned int		status2;
++	unsigned int		status3;
++	unsigned int		status4;
++
++	printk("%s\n", message);
++
++	status0 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_STATUS_0_REG);
++	status1 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_STATUS_1_REG);
++	status2 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_STATUS_2_REG);
++	status3 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_STATUS_3_REG);
++	status4 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_STATUS_4_REG);
++
++	printk("status: s0:%08X, s1:%08X, s2:%08X, s3:%08X, s4:%08X\n",
++		   status0, status1, status2, status3, status4);
++
++	status0 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_0_REG);
++	status1 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_1_REG);
++	status2 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_2_REG);
++	status3 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_3_REG);
++	status4 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_4_REG);
++
++	printk("mask  : s0:%08X, s1:%08X, s2:%08X, s3:%08X, s4:%08X\n",
++		   status0, status1, status2, status3, status4);
++
++	status0 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_0_REG);
++	status1 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_1_REG);
++	status2 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_2_REG);
++	status3 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_3_REG);
++	status4 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_4_REG);
++
++	printk("select: s0:%08X, s1:%08X, s2:%08X, s3:%08X, s4:%08X\n",
++		   status0, status1, status2, status3, status4);
++}
+ /*----------------------------------------------------------------------
+ * toe_gmac_interrupt
+ *----------------------------------------------------------------------*/
+@@ -2492,6 +2531,7 @@
+ 		writel(status3 & tp->intr3_enabled, TOE_GLOBAL_BASE+GLOBAL_INTERRUPT_STATUS_3_REG);
+ 	if (status4)
+ 		writel(status4 & tp->intr4_enabled, TOE_GLOBAL_BASE+GLOBAL_INTERRUPT_STATUS_4_REG);
++
+ #if 0
+ 	/* handle freeq interrupt first */
+ 	if (status4 & tp->intr4_enabled) {
+@@ -2536,10 +2576,31 @@
+ 			}
+ 				if (netif_running(dev) && (status1 & DEFAULT_Q0_INT_BIT) && (tp->intr1_enabled & DEFAULT_Q0_INT_BIT))
+ 				{
+-					if (likely(netif_rx_schedule_prep(dev)))
++					if (!rx_poll_enabled && likely(netif_rx_schedule_prep(dev)))
+         			{
+-        				// unsigned int data32;
+-        				// disable GMAC-0 rx interrupt
++        				unsigned int data32;
++
++						if (rx_poll_enabled)
++								gmac_registers("check #1");
++
++						BUG_ON(rx_poll_enabled == 1);
++
++#if 0
++        				/* Masks GMAC-0 rx interrupt */
++						data32  = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_1_REG);
++						data32 &= ~(DEFAULT_Q0_INT_BIT);
++						writel(data32, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_1_REG);
++
++        				/* Masks GMAC-0 queue empty interrupt */
++						data32  = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_4_REG);
++						data32 &= ~DEFAULT_Q0_INT_BIT;
++						writel(data32, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_4_REG);
++
++						data32  = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_4_REG);
++						data32 &= ~DEFAULT_Q0_INT_BIT;
++						writel(data32, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_4_REG);
++#endif
++
+         				// class-Q & TOE-Q are implemented in future
+         				//data32 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_1_REG);
+         				//data32 &= ~DEFAULT_Q0_INT_BIT;
+@@ -2549,7 +2610,8 @@
+ 						//tp->total_q_cnt_napi=0;
+ 						//rx_time = jiffies;
+ 						//rx_old_bytes = isPtr->rx_bytes;
+-            			__netif_rx_schedule(dev);
++						__netif_rx_schedule(dev);
++						rx_poll_enabled = 1;
+         			}
+ 			}
+ 		}
+@@ -2569,9 +2631,31 @@
+ 
+ 			if (netif_running(dev) && (status1 & DEFAULT_Q1_INT_BIT) && (tp->intr1_enabled & DEFAULT_Q1_INT_BIT))
+ 			{
+-				if (likely(netif_rx_schedule_prep(dev)))
++				if (!rx_poll_enabled && likely(netif_rx_schedule_prep(dev)))
+         		{
+-        			// unsigned int data32;
++        			unsigned int data32;
++
++					if (rx_poll_enabled)
++							gmac_registers("check #2");
++
++					BUG_ON(rx_poll_enabled == 1);
++
++#if 0
++					/* Masks GMAC-1 rx interrupt */
++					data32  = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_1_REG);
++					data32 &= ~(DEFAULT_Q1_INT_BIT);
++					writel(data32, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_1_REG);
++
++        			/* Masks GMAC-1 queue empty interrupt */
++					data32  = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_4_REG);
++					data32 &= ~DEFAULT_Q1_INT_BIT;
++					writel(data32, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_4_REG);
++
++					data32  = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_4_REG);
++					data32 &= ~DEFAULT_Q1_INT_BIT;
++					writel(data32, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_4_REG);
++#endif
++
+          			// disable GMAC-0 rx interrupt
+         			// class-Q & TOE-Q are implemented in future
+         			//data32 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_1_REG);
+@@ -2583,9 +2667,13 @@
+ 					//rx_time = jiffies;
+ 					//rx_old_bytes = isPtr->rx_bytes;
+            			__netif_rx_schedule(dev);
++				rx_poll_enabled = 1;
+         		}
+ 			}
+ 		}
++	} else {
++
++		gmac_registers("check #3");
+ 	}
+ 
+ 	// Interrupt Status 0
+@@ -3306,8 +3394,10 @@
+ 		SET_RPTR(&tp->default_qhdr->word1, rwptr.bits.rptr);
+      	tp->rx_rwptr.bits32 = rwptr.bits32;
+ 
+-		toe_gmac_fill_free_q();
+ 	}
++
++	/* Handles first available packets only then refill the queue. */
++	toe_gmac_fill_free_q();
+ }
+ 
+ /*----------------------------------------------------------------------
+@@ -4217,6 +4307,7 @@
+     GMAC_RXDESC_T   	*curr_desc;
+ 	struct sk_buff 		*skb;
+     DMA_RWPTR_T			rwptr;
++    unsigned int data32;
+ 	unsigned int 		pkt_size;
+ 	unsigned int        desc_count;
+ 	unsigned int        good_frame, chksum_status, rx_status;
+@@ -4231,7 +4322,7 @@
+ 	//unsigned long long	rx_time;
+ 
+ 
+-
++	BUG_ON(rx_poll_enabled == 0);
+ #if 1
+ 	if (do_again)
+ 	{
+@@ -4516,6 +4607,30 @@
+ #endif
+         //toe_gmac_fill_free_q();
+         netif_rx_complete(dev);
++
++		rx_poll_enabled = 0;
++
++		data32 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_1_REG);
++		if (tp->port_id == 0)
++				data32 |= DEFAULT_Q0_INT_BIT;
++		else
++				data32 |= DEFAULT_Q1_INT_BIT;
++		writel(data32, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_1_REG);
++
++		data32 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_4_REG);
++		if (tp->port_id == 0)
++				data32 |= DEFAULT_Q0_INT_BIT;
++		else
++				data32 |= DEFAULT_Q1_INT_BIT;
++		writel(data32, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_4_REG);
++
++		data32 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_4_REG);
++		if (tp->port_id == 0)
++				data32 |= DEFAULT_Q0_INT_BIT;
++		else
++				data32 |= DEFAULT_Q1_INT_BIT;
++		writel(data32, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_4_REG);
++
+         // enable GMAC-0 rx interrupt
+         // class-Q & TOE-Q are implemented in future
+         //data32 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_1_REG);
diff --git a/target/linux/storm/patches/006-gmac_napi_tx.patch b/target/linux/storm/patches/006-gmac_napi_tx.patch
new file mode 100644
index 0000000000..5861a6553d
--- /dev/null
+++ b/target/linux/storm/patches/006-gmac_napi_tx.patch
@@ -0,0 +1,2094 @@
+--- a/drivers/net/sl351x_gmac.c
++++ b/drivers/net/sl351x_gmac.c
+@@ -43,9 +43,13 @@
+ 
+ #include 
+ 
++#define GET_RPTR(x) ((x) & 0xFFFF)
++#define GET_WPTR(x) ((x) >> 16)
++
+ #define	 MIDWAY
+ #define	 SL_LEPUS
+-#define VITESSE_G5SWITCH	1
++// #define VITESSE_G5SWITCH	1
++#undef VITESSE_G5SWITCH
+ 
+ #ifndef CONFIG_SL351x_RXTOE
+ //#define CONFIG_SL351x_RXTOE	1
+@@ -126,7 +130,6 @@
+  *************************************************************/
+ static int	gmac_initialized = 0;
+ TOE_INFO_T toe_private_data;
+-static int		do_again = 0;
+ static int rx_poll_enabled;
+ spinlock_t gmac_fq_lock;
+ unsigned int FLAG_SWITCH;
+@@ -190,7 +193,7 @@
+ void mac_set_sw_tx_weight(struct net_device *dev, char *weight);
+ void mac_get_hw_tx_weight(struct net_device *dev, char *weight);
+ void mac_set_hw_tx_weight(struct net_device *dev, char *weight);
+-static inline void toe_gmac_fill_free_q(void);
++static inline void toe_gmac_fill_free_q(int count);
+ 
+ #ifdef VITESSE_G5SWITCH
+ extern int Get_Set_port_status(void);
+@@ -295,12 +298,14 @@
+ 	for(j = 0; idev = NULL;
+@@ -459,7 +464,7 @@
+ 		toe->gmac[1].dma_base_addr = TOE_GMAC1_DMA_BASE;
+         toe->gmac[0].auto_nego_cfg = 1;
+         toe->gmac[1].auto_nego_cfg = 1;
+-#ifdef CONFIG_SL3516_ASIC
++#ifndef CONFIG_SL3516_ASIC
+         toe->gmac[0].speed_cfg = GMAC_SPEED_1000;
+         toe->gmac[1].speed_cfg = GMAC_SPEED_1000;
+ #else
+@@ -508,7 +513,7 @@
+ 		// Write GLOBAL_QUEUE_THRESHOLD_REG
+ 		threshold.bits32 = 0;
+ 		threshold.bits.swfq_empty = (TOE_SW_FREEQ_DESC_NUM > 256) ? 255 :
+-		                                        TOE_SW_FREEQ_DESC_NUM/2;
++		                                        TOE_SW_FREEQ_DESC_NUM/16;
+ 		threshold.bits.hwfq_empty = (TOE_HW_FREEQ_DESC_NUM > 256) ? 256/4 :
+ 		                                        TOE_HW_FREEQ_DESC_NUM/4;
+ 		threshold.bits.toe_class = (TOE_TOE_DESC_NUM > 256) ? 256/4 :
+@@ -613,18 +618,25 @@
+ 	rwptr_reg.bits.rptr = 0;
+ 	toe->fq_rx_rwptr.bits32 = rwptr_reg.bits32;
+ 	writel(rwptr_reg.bits32, TOE_GLOBAL_BASE + GLOBAL_SWFQ_RWPTR_REG);
++	printk("SWFQ: %08X\n", readl(TOE_GLOBAL_BASE + GLOBAL_SWFQ_RWPTR_REG));
+ 
+ 	// SW Free Queue Descriptors
+ 	for (i=0; iword0.bits.buffer_size = SW_RX_BUF_SIZE;
+-		sw_desc_ptr->word1.bits.sw_id = i;	// used to locate skb
++		sw_desc_ptr->word1.bits.sw_id = 0;	// used to locate skb
+ 		if ( (skb = dev_alloc_skb(SW_RX_BUF_SIZE))==NULL)  /* allocate socket buffer */
+ 		{
+ 			printk("%s::skb buffer allocation fail !\n",__func__); while(1);
+ 		}
+-		REG32(skb->data) = (unsigned int)skb;
++
++		data = skb->data;
+ 		skb_reserve(skb, SKB_RESERVE_BYTES);
++
++		REG32(data + 0) = (unsigned int)skb;
++		REG32(data + 4) = (unsigned short)i;
++
+ 		// toe->rx_skb[i] = skb;
+ 		sw_desc_ptr->word2.buf_adr = (unsigned int)__pa(skb->data);
+ //   		consistent_sync((unsigned int)desc_ptr, sizeof(GMAC_RXDESC_T), PCI_DMA_TODEVICE);
+@@ -851,14 +863,14 @@
+ *----------------------------------------------------------------------*/
+ static void toe_init_default_queue(void)
+ {
+-	TOE_INFO_T				*toe;
++	TOE_INFO_T		*toe;
+ 	volatile NONTOE_QHDR_T	*qhdr;
+-	GMAC_RXDESC_T			*desc_ptr;
+-	DMA_SKB_SIZE_T			skb_size;
++	GMAC_RXDESC_T		*desc_ptr;
++	DMA_SKB_SIZE_T		skb_size;
+ 
+ 	toe = (TOE_INFO_T *)&toe_private_data;
+ 	desc_ptr = (GMAC_RXDESC_T *)DMA_MALLOC((TOE_DEFAULT_Q0_DESC_NUM * sizeof(GMAC_RXDESC_T)),
+-											(dma_addr_t *)&toe->gmac[0].default_desc_base_dma);
++					       (dma_addr_t *)&toe->gmac[0].default_desc_base_dma);
+ 	if (!desc_ptr)
+ 	{
+ 		printk("%s::DMA_MALLOC fail !\n",__func__);
+@@ -866,14 +878,17 @@
+ 	}
+ 	memset((void *)desc_ptr, 0, TOE_DEFAULT_Q0_DESC_NUM * sizeof(GMAC_RXDESC_T));
+ 	toe->gmac[0].default_desc_base = (unsigned int)desc_ptr;
++	printk("toe->gmac[0].default_desc_base_dma: %08X\n", toe->gmac[0].default_desc_base_dma);
++
+ 	toe->gmac[0].default_desc_num = TOE_DEFAULT_Q0_DESC_NUM;
+ 	qhdr = (volatile NONTOE_QHDR_T *)TOE_DEFAULT_Q0_HDR_BASE;
+ 	qhdr->word0.base_size = ((unsigned int)toe->gmac[0].default_desc_base_dma & NONTOE_QHDR0_BASE_MASK) | TOE_DEFAULT_Q0_DESC_POWER;
+ 	qhdr->word1.bits32 = 0;
+ 	toe->gmac[0].rx_rwptr.bits32 = 0;
+ 	toe->gmac[0].default_qhdr = (NONTOE_QHDR_T *)qhdr;
++
+ 	desc_ptr = (GMAC_RXDESC_T *)DMA_MALLOC((TOE_DEFAULT_Q1_DESC_NUM * sizeof(GMAC_RXDESC_T)),
+-											(dma_addr_t *)&toe->gmac[1].default_desc_base_dma);
++					       (dma_addr_t *)&toe->gmac[1].default_desc_base_dma);
+ 	if (!desc_ptr)
+ 	{
+ 		printk("%s::DMA_MALLOC fail !\n",__func__);
+@@ -1071,12 +1086,16 @@
+ 
+ 	    data = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_0_REG) & ~tp->intr0_selected;
+ 	    writel(data, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_0_REG);
++
+ 	    data = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_1_REG) & ~tp->intr1_selected;
+ 	    writel(data, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_1_REG);
++
+ 	    data = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_2_REG) & ~tp->intr2_selected;
+ 	    writel(data, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_2_REG);
++
+ 	    data = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_3_REG) & ~tp->intr3_selected;
+ 	    writel(data, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_3_REG);
++
+ 	    data = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_4_REG) & ~tp->intr4_selected;
+ 	    writel(data, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_4_REG);
+ 	}
+@@ -1176,11 +1195,11 @@
+ 	GMAC_CONFIG2_T	config2_val;
+ 	GMAC_CONFIG0_T	config0,config0_mask;
+ 	GMAC_CONFIG1_T	config1;
+-	#ifdef CONFIG_SL351x_NAT
+ 	GMAC_CONFIG3_T	config3_val;
+-	#endif
+ 	GMAC_TX_WCR0_T	hw_weigh;
+ 	GMAC_TX_WCR1_T	sw_weigh;
++
++	uint32_t weight = 0;
+ //	GMAC_HASH_ENABLE_REG0_T hash_ctrl;
+ //
+ #if 0 /* mac address will be set in late_initcall */
+@@ -1202,24 +1221,23 @@
+ 	//	config1.bits32 = 0x002004;	//next version
+ 	/* set flow control threshold */
+ 	config1.bits32 = 0;
+-	config1.bits.set_threshold = 32 / 2;
+-	config1.bits.rel_threshold = 32 / 4 * 3;
++	config1.bits.set_threshold = (32 / 2);
++	config1.bits.rel_threshold = (32 / 4) * 3;
+ 	gmac_write_reg(tp->base_addr, GMAC_CONFIG1, config1.bits32, 0xffffffff);
+ 
+-	/* set flow control threshold */
++	/* TODO: set flow control threshold */
+ 	config2_val.bits32 = 0;
+-	config2_val.bits.set_threshold = TOE_SW_FREEQ_DESC_NUM/2;
+-	config2_val.bits.rel_threshold = TOE_SW_FREEQ_DESC_NUM*3/4;
++	config2_val.bits.set_threshold = TOE_SW_FREEQ_DESC_NUM/4;
++	config2_val.bits.rel_threshold = TOE_SW_FREEQ_DESC_NUM/2;
+ 	gmac_write_reg(tp->base_addr, GMAC_CONFIG2, config2_val.bits32,0xffffffff);
+ 
+-	#ifdef CONFIG_SL351x_NAT
+-	/* set HW free queue flow control threshold */
++	/* TODO: set HW free queue flow control threshold */
+ 	config3_val.bits32 = 0;
+ 	config3_val.bits.set_threshold = PAUSE_SET_HW_FREEQ;
+ 	config3_val.bits.rel_threshold = PAUSE_REL_HW_FREEQ;
+ 	gmac_write_reg(tp->base_addr, GMAC_CONFIG3, config3_val.bits32,0xffffffff);
+-	#endif
+-	/* set_mcast_filter mask*/
++
++	/* TODO: set_mcast_filter mask*/
+ 	//	gmac_write_reg(tp->base_addr,GMAC_MCAST_FIL0,0x0,0xffffffff);
+ 	//  gmac_write_reg(tp->base_addr,GMAC_MCAST_FIL1,0x0,0xffffffff);
+ 
+@@ -1249,7 +1267,7 @@
+ 	config0.bits.dis_rx = 1;  /* disable rx */
+ 	config0.bits.dis_tx = 1;  /* disable tx */
+ 	config0.bits.loop_back = 0; /* enable/disable GMAC loopback */
+-	config0.bits.rx_err_detect = 1;
++	config0.bits.rx_err_detect = 1;	/* TODO: was 1, means disabled, 0 enabled ! */
+ 	config0.bits.rgmii_en = 0;
+ 	config0.bits.rgmm_edge = 1;
+ 	config0.bits.rxc_inv = 0;
+@@ -1342,6 +1360,9 @@
+ 	gmac_write_reg(tp->dma_base_addr, GMAC_AHB_WEIGHT_REG, ahb_weight.bits32, ahb_weight_mask.bits32);
+ 	#endif
+ 
++	weight = gmac_read_reg(tp->dma_base_addr, GMAC_AHB_WEIGHT_REG);
++	printk("====> %08X\n", weight);
++
+ 	#if defined(CONFIG_SL351x_NAT) || defined(CONFIG_SL351x_RXTOE)
+ 	gmac_write_reg(tp->dma_base_addr, GMAC_SPR0, IPPROTO_TCP, 0xffffffff);
+ 	#endif
+@@ -1552,7 +1573,7 @@
+ 		rwptr.bits32 = readl(swtxq->rwptr_reg);
+ 		if (rwptr.bits.rptr == swtxq->finished_idx)
+ 			break;
+-    	curr_desc = (volatile GMAC_TXDESC_T *)swtxq->desc_base + swtxq->finished_idx;
++		curr_desc = (volatile GMAC_TXDESC_T *)swtxq->desc_base + swtxq->finished_idx;
+ //   		consistent_sync((void *)curr_desc, sizeof(GMAC_TXDESC_T), PCI_DMA_FROMDEVICE);
+ 		word0.bits32 = curr_desc->word0.bits32;
+ 		word1.bits32 = curr_desc->word1.bits32;
+@@ -1573,6 +1594,7 @@
+ 				swtxq->finished_idx = RWPTR_ADVANCE_ONE(swtxq->finished_idx, swtxq->total_desc_num);
+ 				curr_desc = (GMAC_TXDESC_T *)swtxq->desc_base + swtxq->finished_idx;
+ 				word0.bits32 = curr_desc->word0.bits32;
++
+ #ifdef _DUMP_TX_TCP_CONTENT
+ 				if (curr_desc->word0.bits.buffer_size < 16)
+ 				{
+@@ -1592,12 +1614,12 @@
+ 			word0.bits.status_tx_ok = 0;
+ 			if (swtxq->tx_skb[swtxq->finished_idx])
+ 			{
+-				if (interrupt)
+-					dev_kfree_skb_irq(swtxq->tx_skb[swtxq->finished_idx]);
+-				else
+-					dev_kfree_skb(swtxq->tx_skb[swtxq->finished_idx]);
++				dev_kfree_skb(swtxq->tx_skb[swtxq->finished_idx]);
+ 				swtxq->tx_skb[swtxq->finished_idx] = NULL;
++			} else {
++				BUG();
+ 			}
++
+ 			curr_desc->word0.bits32 = word0.bits32;
+   			swtxq->curr_finished_desc = (GMAC_TXDESC_T *)curr_desc;
+  			swtxq->total_finished++;
+@@ -1624,31 +1646,29 @@
+ *----------------------------------------------------------------------*/
+ static int gmac_start_xmit(struct sk_buff *skb, struct net_device *dev)
+ {
+-	GMAC_INFO_T 			*tp= dev->priv;
+-//	static unsigned int     pcount = 0;
+-//	unsigned int			tx_qid;
+-    DMA_RWPTR_T				rwptr;
+-	volatile GMAC_TXDESC_T	*curr_desc;
+-	int 					snd_pages = skb_shinfo(skb)->nr_frags + 1;  /* get number of descriptor */
+-	int 					frag_id = 0;
+-	int 					len, total_len = skb->len;
++	GMAC_INFO_T *tp= dev->priv;
++	DMA_RWPTR_T rwptr;
++	GMAC_TXDESC_T *curr_desc;
++	int snd_pages = skb_shinfo(skb)->nr_frags + 1;  /* get number of descriptor */
++	int frag_id = 0;
++	int len, total_len = skb->len;
+ 	struct net_device_stats *isPtr;
+-	unsigned int			free_desc;
+-	GMAC_SWTXQ_T			*swtxq;
++	unsigned int free_desc;
++	GMAC_SWTXQ_T *swtxq;
+ 	register unsigned long	word0, word1, word2, word3;
+ 	unsigned short			wptr, rptr;
+ #ifdef	L2_jumbo_frame
+ 	int header_len = skb->len;
+ 	struct iphdr	*ip_hdr;
+-    struct tcphdr	*tcp_hdr;
+-    int             tcp_hdr_len;
+-    unsigned char 	*ptr;
+-    int             data_len,a;
+-    unsigned int    val;
++	struct tcphdr	*tcp_hdr;
++	int             tcp_hdr_len;
++	unsigned char 	*ptr;
++	int             data_len,a;
++	unsigned int    val;
+ #endif
+ 
+ #ifdef GMAC_LEN_1_2_ISSUE
+-	int						total_pages;
++	int total_pages;
+ 	total_pages = snd_pages;
+ #endif
+ 
+@@ -1664,13 +1684,6 @@
+     }
+ #endif
+ 
+-#if 0
+-	if (storlink_ctl.recvfile==2)
+-	{
+-	    printk("snd_pages=%d skb->len=%d\n",snd_pages,skb->len);
+-	}
+-#endif
+-
+ #ifdef GMAC_USE_TXQ0
+ 	#define tx_qid 	0
+ #endif
+@@ -1703,9 +1716,9 @@
+ 	toe_gmac_tx_complete(tp, tx_qid, dev, 0);
+ 
+ 	if (wptr >= swtxq->finished_idx)
+-		free_desc = swtxq->total_desc_num - wptr - 1 + swtxq->finished_idx;
++		free_desc = swtxq->total_desc_num - wptr + swtxq->finished_idx;
+ 	else
+-		free_desc = swtxq->finished_idx - wptr - 1;
++		free_desc = swtxq->finished_idx - wptr;
+ 	if (free_desc < snd_pages)
+ 	{
+ //		spin_unlock(&tp->tx_mutex);
+@@ -2063,9 +2076,10 @@
+ struct net_device_stats * gmac_get_stats(struct net_device *dev)
+ {
+     GMAC_INFO_T *tp = (GMAC_INFO_T *)dev->priv;
++#if 0	/* don't read stats from hardware, scary numbers. */
+     // unsigned int        flags;
+-    unsigned int        pkt_drop;
+-    unsigned int        pkt_error;
++    unsigned int        pkt_drop = 0;
++    unsigned int        pkt_error = 0;
+ 
+     if (netif_running(dev))
+     {
+@@ -2073,10 +2087,14 @@
+         // spin_lock_irqsave(&tp->lock,flags);
+         pkt_drop = gmac_read_reg(tp->base_addr,GMAC_IN_DISCARDS);
+         pkt_error = gmac_read_reg(tp->base_addr,GMAC_IN_ERRORS);
++	printk("**** stack: %lu, hw: %lu\n", tp->ifStatics.rx_dropped, pkt_drop);
++
+         tp->ifStatics.rx_dropped = tp->ifStatics.rx_dropped + pkt_drop;
+         tp->ifStatics.rx_errors = tp->ifStatics.rx_errors + pkt_error;
+         // spin_unlock_irqrestore(&tp->lock,flags);
+     }
++#endif
++
+     return &tp->ifStatics;
+ }
+ 
+@@ -2401,36 +2419,63 @@
+ * toe_gmac_fill_free_q
+ * allocate buffers for free queue.
+ *----------------------------------------------------------------------*/
+-static inline void toe_gmac_fill_free_q(void)
++static inline void toe_gmac_fill_free_q(int count)
+ {
+ 	struct sk_buff	*skb;
+ 	volatile DMA_RWPTR_T	fq_rwptr;
+ 	volatile GMAC_RXDESC_T	*fq_desc;
+-	unsigned long	flags;
++	unsigned long flags;
++	unsigned short index;
++	int filled = 0;
++	static int entered;
+ 	// unsigned short max_cnt=TOE_SW_FREEQ_DESC_NUM>>1;
+ 
++	BUG_ON(entered == 1);
++
++	entered = 1;
++
++
+ 	fq_rwptr.bits32 = readl(TOE_GLOBAL_BASE + GLOBAL_SWFQ_RWPTR_REG);
+ 	// spin_lock_irqsave(&gmac_fq_lock, flags);
+ 	//while ((max_cnt--) && (unsigned short)RWPTR_ADVANCE_ONE(fq_rwptr.bits.wptr,
+ 	//				TOE_SW_FREEQ_DESC_NUM) != fq_rwptr.bits.rptr) {
+-	while ((unsigned short)RWPTR_ADVANCE_ONE(fq_rwptr.bits.wptr,
+-					TOE_SW_FREEQ_DESC_NUM) != fq_rwptr.bits.rptr) {
++	index = fq_rwptr.bits.wptr;
++#if 0
++	printk("wptr: %hu, rptr: %hu, refill idx: %hu\n",
++	       GET_RPTR(fq_rwptr.bits32),
++	       GET_WPTR(fq_rwptr.bits32),
++	       index);
++#endif
++
++	index = RWPTR_ADVANCE_ONE(index, TOE_SW_FREEQ_DESC_NUM);
++	fq_desc = (GMAC_RXDESC_T*)toe_private_data.swfq_desc_base + index;
++	while (fq_desc->word2.buf_adr == 0) {
++		void *data = NULL;
++
+ 		if ((skb = dev_alloc_skb(SW_RX_BUF_SIZE)) == NULL) {
+ 			printk("%s::skb allocation fail!\n", __func__);
+-			//while(1);
+-			break;
++			goto out;
+ 		}
+-		REG32(skb->data) = (unsigned int)skb;
++		++ filled;
++		data = skb->data;
+ 		skb_reserve(skb, SKB_RESERVE_BYTES);
+-		// fq_rwptr.bits32 = readl(TOE_GLOBAL_BASE + GLOBAL_SWFQ_RWPTR_REG);
+-		fq_rwptr.bits.wptr = RWPTR_ADVANCE_ONE(fq_rwptr.bits.wptr,
+-			TOE_SW_FREEQ_DESC_NUM);
+-		fq_desc = (GMAC_RXDESC_T*)toe_private_data.swfq_desc_base+fq_rwptr.bits.wptr;
++
++		REG32(data + 0) = (unsigned int)skb;
++		REG32(data + 4) = (unsigned short)index;
++
++		// printk("refill skb: %p, idx: %hu\n", skb, index);
+ 		fq_desc->word2.buf_adr = (unsigned int)__pa(skb->data);
+-		SET_WPTR(TOE_GLOBAL_BASE+GLOBAL_SWFQ_RWPTR_REG, fq_rwptr.bits.wptr);
+-		toe_private_data.fq_rx_rwptr.bits32 = fq_rwptr.bits32;
++	writel(0x07960202, TOE_GMAC0_BASE+GMAC_CONFIG0);
++		SET_WPTR(TOE_GLOBAL_BASE+GLOBAL_SWFQ_RWPTR_REG, index);
++	writel(0x07960200, TOE_GMAC0_BASE+GMAC_CONFIG0);
++
++		index = RWPTR_ADVANCE_ONE(index, TOE_SW_FREEQ_DESC_NUM);
++		fq_desc = (GMAC_RXDESC_T*)toe_private_data.swfq_desc_base+index;
+ 	}
++out:
+ 	// spin_unlock_irqrestore(&gmac_fq_lock, flags);
++
++	entered = 0;
+ }
+ // EXPORT_SYMBOL(toe_gmac_fill_free_q);
+ 
+@@ -2442,14 +2487,14 @@
+ 	unsigned int		status3;
+ 	unsigned int		status4;
+ 
+-	printk("%s\n", message);
+-
+ 	status0 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_STATUS_0_REG);
+ 	status1 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_STATUS_1_REG);
+ 	status2 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_STATUS_2_REG);
+ 	status3 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_STATUS_3_REG);
+ 	status4 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_STATUS_4_REG);
+ 
++	printk("%s\n", message);
++
+ 	printk("status: s0:%08X, s1:%08X, s2:%08X, s3:%08X, s4:%08X\n",
+ 		   status0, status1, status2, status3, status4);
+ 
+@@ -2468,8 +2513,9 @@
+ 	status3 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_3_REG);
+ 	status4 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_4_REG);
+ 
+-	printk("select: s0:%08X, s1:%08X, s2:%08X, s3:%08X, s4:%08X\n",
+-		   status0, status1, status2, status3, status4);
++	if (status0 || status1 || status2 || status3 || status4)
++			printk("select: s0:%08X, s1:%08X, s2:%08X, s3:%08X, s4:%08X\n",
++				   status0, status1, status2, status3, status4);
+ }
+ /*----------------------------------------------------------------------
+ * toe_gmac_interrupt
+@@ -2485,75 +2531,44 @@
+ 	unsigned int		status3;
+ 	unsigned int		status4;
+ 
+-//	struct net_device_stats *isPtr = (struct net_device_stats *)&tp->ifStatics;
+ 	toe = (TOE_INFO_T *)&toe_private_data;
+-//	handle NAPI
+-#ifdef CONFIG_SL_NAPI
+-	/* XXX: check this, changed from 'storlink_ctl.pauseoff == 1' to if (1) */
+-if (1)
+-{
+-/* disable GMAC interrupt */
+-    //toe_gmac_disable_interrupt(tp->irq);
+ 
+-//	isPtr->interrupts++;
++	if (0 && rx_poll_enabled) {
++		gmac_registers("interrupt handler");
++	}
++
+ 	/* read Interrupt status */
+ 	status0 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_STATUS_0_REG);
+ 	status1 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_STATUS_1_REG);
+ 	status2 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_STATUS_2_REG);
+ 	status3 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_STATUS_3_REG);
+ 	status4 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_STATUS_4_REG);
+-	// prompt warning if status bit ON but not enabled
++
+ #if 0
+-	if (status0 & ~tp->intr0_enabled)
+-		printk("Intr 0 Status error. status = 0x%X, enable = 0x%X\n",
+-				status0, tp->intr0_enabled);
+-	if (status1 & ~tp->intr1_enabled)
+-		printk("Intr 1 Status error. status = 0x%X, enable = 0x%X\n",
+-				status1, tp->intr1_enabled);
+-	if (status2 & ~tp->intr2_enabled)
+-		printk("Intr 2 Status error. status = 0x%X, enable = 0x%X\n",
+-				status2, tp->intr2_enabled);
+-	if (status3 & ~tp->intr3_enabled)
+-		printk("Intr 3 Status error. status = 0x%X, enable = 0x%X\n",
+-				status3, tp->intr3_enabled);
+-	if (status4 & ~tp->intr4_enabled)
+-		printk("Intr 4 Status error. status = 0x%X, enable = 0x%X\n",
+-				status4, tp->intr4_enabled);
++	/* handle freeq interrupt first */
++	if (status4 & SWFQ_EMPTY_INT_BIT)
++	{
++		toe_gmac_fill_free_q();
++		writel(status4 & SWFQ_EMPTY_INT_BIT, TOE_GLOBAL_BASE+GLOBAL_INTERRUPT_STATUS_4_REG);
++		tp->sw_fq_empty_cnt++;
++	}
+ #endif
+ 
++	if (status4 & GMAC0_MIB_INT_BIT)
++		writel(GMAC0_MIB_INT_BIT, TOE_GLOBAL_BASE+GLOBAL_INTERRUPT_STATUS_4_REG);
++
++	if (status4 & GMAC0_RX_OVERRUN_INT_BIT)
++		writel(GMAC0_RX_OVERRUN_INT_BIT, TOE_GLOBAL_BASE+GLOBAL_INTERRUPT_STATUS_4_REG);
++
+ 	if (status0)
+ 		writel(status0 & tp->intr0_enabled, TOE_GLOBAL_BASE+GLOBAL_INTERRUPT_STATUS_0_REG);
+-	if (status1)
+-		writel(status1 & tp->intr1_enabled, TOE_GLOBAL_BASE+GLOBAL_INTERRUPT_STATUS_1_REG);
+ 	if (status2)
+ 		writel(status2 & tp->intr2_enabled, TOE_GLOBAL_BASE+GLOBAL_INTERRUPT_STATUS_2_REG);
+ 	if (status3)
+ 		writel(status3 & tp->intr3_enabled, TOE_GLOBAL_BASE+GLOBAL_INTERRUPT_STATUS_3_REG);
+-	if (status4)
+-		writel(status4 & tp->intr4_enabled, TOE_GLOBAL_BASE+GLOBAL_INTERRUPT_STATUS_4_REG);
+-
+-#if 0
+-	/* handle freeq interrupt first */
+-	if (status4 & tp->intr4_enabled) {
+-		if ((status4 & SWFQ_EMPTY_INT_BIT) && (tp->intr4_enabled & SWFQ_EMPTY_INT_BIT))
+-		{
+-			// unsigned long data = REG32(TOE_GLOBAL_BASE + GLOBAL_SWFQ_RWPTR_REG);
+-			//gmac_write_reg(TOE_GLOBAL_BASE, GLOBAL_INTERRUPT_ENABLE_4_REG,
+-			//	tp->intr4_enabled & ~SWFQ_EMPTY_INT_BIT, SWFQ_EMPTY_INT_BIT);
+-
+-			if (toe->gmac[0].dev && netif_running(toe->gmac[0].dev))
+-				toe_gmac_handle_default_rxq(toe->gmac[0].dev,&toe->gmac[0]);
+-			if (toe->gmac[1].dev && netif_running(toe->gmac[1].dev))
+-				toe_gmac_handle_default_rxq(toe->gmac[1].dev,&toe->gmac[1]);
+-			printk("\nfreeq int\n");
+-			toe_gmac_fill_free_q();
+-			tp->sw_fq_empty_cnt++;
+ 
+-		}
+-	}
+-#endif
+ 	// Interrupt Status 1
+-	if (status1 & tp->intr1_enabled)
++	if ((status1 & 3) || (status4 & 1))
+ 	{
+ 		#define G1_INTR0_BITS	(GMAC1_HWTQ13_EOF_INT_BIT | GMAC1_HWTQ12_EOF_INT_BIT | GMAC1_HWTQ11_EOF_INT_BIT | GMAC1_HWTQ10_EOF_INT_BIT)
+ 		#define G0_INTR0_BITS	(GMAC0_HWTQ03_EOF_INT_BIT | GMAC0_HWTQ02_EOF_INT_BIT | GMAC0_HWTQ01_EOF_INT_BIT | GMAC0_HWTQ00_EOF_INT_BIT)
+@@ -2563,7 +2578,7 @@
+ 		// because they should pass packets to upper layer
+ 		if (tp->port_id == 0)
+ 		{
+-			if (netif_running(dev) && (status1 & G0_INTR0_BITS) && (tp->intr1_enabled & G0_INTR0_BITS))
++			if (((status1 & G0_INTR0_BITS) && (tp->intr1_enabled & G0_INTR0_BITS)) || (status4 & 1))
+ 			{
+ 				if (status1 & GMAC0_HWTQ03_EOF_INT_BIT)
+ 					tp->hwtxq[3].eof_cnt++;
+@@ -2574,50 +2589,51 @@
+ 				if (status1 & GMAC0_HWTQ00_EOF_INT_BIT)
+ 					tp->hwtxq[0].eof_cnt++;
+ 			}
+-				if (netif_running(dev) && (status1 & DEFAULT_Q0_INT_BIT) && (tp->intr1_enabled & DEFAULT_Q0_INT_BIT))
++			if (status1 & DEFAULT_Q0_INT_BIT || status4 & 1)
++			{
++				if (likely(netif_rx_schedule_prep(dev)))
+ 				{
+-					if (!rx_poll_enabled && likely(netif_rx_schedule_prep(dev)))
+-        			{
+-        				unsigned int data32;
++					unsigned int data32;
++
++					BUG_ON(rx_poll_enabled == 1);
+ 
+-						if (rx_poll_enabled)
+-								gmac_registers("check #1");
++					/* Masks GMAC-0 rx interrupt */
++					data32  = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_1_REG);
++					data32 &= ~(DEFAULT_Q0_INT_BIT);
++					writel(data32, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_1_REG);
+ 
+-						BUG_ON(rx_poll_enabled == 1);
++					/* Masks GMAC-0 queue empty interrupt */
++					data32  = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_4_REG);
++					data32 &= ~DEFAULT_Q0_INT_BIT;
++					writel(data32, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_4_REG);
+ 
++					__netif_rx_schedule(dev);
++					rx_poll_enabled = 1;
++				} else {
+ #if 0
+-        				/* Masks GMAC-0 rx interrupt */
+-						data32  = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_1_REG);
+-						data32 &= ~(DEFAULT_Q0_INT_BIT);
+-						writel(data32, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_1_REG);
+-
+-        				/* Masks GMAC-0 queue empty interrupt */
+-						data32  = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_4_REG);
+-						data32 &= ~DEFAULT_Q0_INT_BIT;
+-						writel(data32, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_4_REG);
+-
+-						data32  = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_4_REG);
+-						data32 &= ~DEFAULT_Q0_INT_BIT;
+-						writel(data32, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_4_REG);
+-#endif
+-
+-        				// class-Q & TOE-Q are implemented in future
+-        				//data32 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_1_REG);
+-        				//data32 &= ~DEFAULT_Q0_INT_BIT;
+-						//writel(data32, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_1_REG);
+-						//printk("\%s: DEFAULT_Q0_INT_BIT===================>>>>>>>>>>>>\n",__func__);
+-						writel(0x0, TOE_GLOBAL_BASE+GLOBAL_INTERRUPT_ENABLE_1_REG);
+-						//tp->total_q_cnt_napi=0;
+-						//rx_time = jiffies;
+-						//rx_old_bytes = isPtr->rx_bytes;
+-						__netif_rx_schedule(dev);
+-						rx_poll_enabled = 1;
+-        			}
++					unsigned int data32;
++
++					if (rx_poll_enabled)
++						gmac_registers("->poll() running.");
++					/* Masks GMAC-0 rx interrupt */
++					data32  = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_1_REG);
++					data32 &= ~(DEFAULT_Q0_INT_BIT);
++					writel(data32, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_1_REG);
++
++					/* Masks GMAC-0 queue empty interrupt */
++					data32  = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_4_REG);
++					data32 &= ~DEFAULT_Q0_INT_BIT;
++					writel(data32, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_4_REG);
++#endif
++				}
++			} else {
++				if (0)
++					gmac_registers("status1 & DEFAULT_Q0_INT_BIT || status4 & 1");
+ 			}
+ 		}
+-		else if (tp->port_id == 1)
++		else if (tp->port_id == 1 && netif_running(dev))
+ 		{
+-			if (netif_running(dev) && (status1 & G1_INTR0_BITS) && (tp->intr1_enabled & G1_INTR0_BITS))
++			if ((status1 & G1_INTR0_BITS) && (tp->intr1_enabled & G1_INTR0_BITS))
+ 			{
+ 				if (status1 & GMAC1_HWTQ13_EOF_INT_BIT)
+ 					tp->hwtxq[3].eof_cnt++;
+@@ -2629,14 +2645,14 @@
+ 					tp->hwtxq[0].eof_cnt++;
+ 			}
+ 
+-			if (netif_running(dev) && (status1 & DEFAULT_Q1_INT_BIT) && (tp->intr1_enabled & DEFAULT_Q1_INT_BIT))
++			if ((status1 & DEFAULT_Q1_INT_BIT) && (tp->intr1_enabled & DEFAULT_Q1_INT_BIT))
+ 			{
+ 				if (!rx_poll_enabled && likely(netif_rx_schedule_prep(dev)))
+-        		{
+-        			unsigned int data32;
++				{
++					unsigned int data32;
+ 
+ 					if (rx_poll_enabled)
+-							gmac_registers("check #2");
++						gmac_registers("check #2");
+ 
+ 					BUG_ON(rx_poll_enabled == 1);
+ 
+@@ -2646,7 +2662,7 @@
+ 					data32 &= ~(DEFAULT_Q1_INT_BIT);
+ 					writel(data32, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_1_REG);
+ 
+-        			/* Masks GMAC-1 queue empty interrupt */
++					/* Masks GMAC-1 queue empty interrupt */
+ 					data32  = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_4_REG);
+ 					data32 &= ~DEFAULT_Q1_INT_BIT;
+ 					writel(data32, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_4_REG);
+@@ -2656,24 +2672,21 @@
+ 					writel(data32, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_4_REG);
+ #endif
+ 
+-         			// disable GMAC-0 rx interrupt
+-        			// class-Q & TOE-Q are implemented in future
+-        			//data32 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_1_REG);
+-        			//data32 &= ~DEFAULT_Q1_INT_BIT;
++					// disable GMAC-0 rx interrupt
++					// class-Q & TOE-Q are implemented in future
++					//data32 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_1_REG);
++					//data32 &= ~DEFAULT_Q1_INT_BIT;
+ 					//writel(data32, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_1_REG);
+ 					//printk("\%s: 1111111111--->DEFAULT_Q1_INT_BIT===================>>>>>>>>>>>>\n",__func__);
+ 					writel(0x0, TOE_GLOBAL_BASE+GLOBAL_INTERRUPT_ENABLE_1_REG);
+ 					//tp->total_q_cnt_napi=0;
+ 					//rx_time = jiffies;
+ 					//rx_old_bytes = isPtr->rx_bytes;
+-           			__netif_rx_schedule(dev);
+-				rx_poll_enabled = 1;
+-        		}
++					__netif_rx_schedule(dev);
++					rx_poll_enabled = 1;
++				}
+ 			}
+ 		}
+-	} else {
+-
+-		gmac_registers("check #3");
+ 	}
+ 
+ 	// Interrupt Status 0
+@@ -2814,676 +2827,93 @@
+ 		}
+ 	}
+ 
+-	//toe_gmac_enable_interrupt(tp->irq);
+-#ifdef IxscriptMate_1518
+-	if (storlink_ctl.pauseoff == 1)
+-	{
+-		GMAC_CONFIG0_T config0;
+-		config0.bits32 = readl(TOE_GMAC0_BASE+GMAC_CONFIG0);
+-		config0.bits.dis_rx = 0;
+-		writel(config0.bits32, TOE_GMAC0_BASE+GMAC_CONFIG0);
+-		config0.bits32 = readl(TOE_GMAC1_BASE+GMAC_CONFIG0);
+-		config0.bits.dis_rx = 0;
+-		writel(config0.bits32, TOE_GMAC1_BASE+GMAC_CONFIG0);
+-	}
+-#endif
+-//	 enable_irq(gmac_irq[dev_index]);
+-	//printk("gmac_interrupt complete!\n\n");
+-//	return IRQ_RETVAL(handled);
+ 	return	IRQ_RETVAL(1);
+ }
+-else
+-{
+-#endif	//endif NAPI
+ 
++/*----------------------------------------------------------------------
++* gmac_get_phy_vendor
++*----------------------------------------------------------------------*/
++static unsigned int gmac_get_phy_vendor(int phy_addr)
++{
++    unsigned int	reg_val;
++    reg_val=(mii_read(phy_addr,0x02) << 16) + mii_read(phy_addr,0x03);
++    return reg_val;
++}
+ 
+-	/* disable GMAC interrupt */
+-    toe_gmac_disable_interrupt(tp->irq);
++/*----------------------------------------------------------------------
++* gmac_set_phy_status
++*----------------------------------------------------------------------*/
++void gmac_set_phy_status(struct net_device *dev)
++{
++	GMAC_INFO_T *tp = dev->priv;
++	GMAC_STATUS_T   status;
++	unsigned int    reg_val, ability,wan_port_id;
++	unsigned int    i = 0;
+ 
+-//	isPtr->interrupts++;
+-	/* read Interrupt status */
+-	status0 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_STATUS_0_REG);
+-	status1 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_STATUS_1_REG);
+-	status2 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_STATUS_2_REG);
+-	status3 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_STATUS_3_REG);
+-	status4 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_STATUS_4_REG);
+-	// prompt warning if status bit ON but not enabled
++#ifdef VITESSE_G5SWITCH
++	if((tp->port_id == GMAC_PORT1)&&(Giga_switch==1)){
+ #if 0
+-	if (status0 & ~tp->intr0_enabled)
+-		printk("Intr 0 Status error. status = 0x%X, enable = 0x%X\n",
+-				status0, tp->intr0_enabled);
+-	if (status1 & ~tp->intr1_enabled)
+-		printk("Intr 1 Status error. status = 0x%X, enable = 0x%X\n",
+-				status1, tp->intr1_enabled);
+-	if (status2 & ~tp->intr2_enabled)
+-		printk("Intr 2 Status error. status = 0x%X, enable = 0x%X\n",
+-				status2, tp->intr2_enabled);
+-	if (status3 & ~tp->intr3_enabled)
+-		printk("Intr 3 Status error. status = 0x%X, enable = 0x%X\n",
+-				status3, tp->intr3_enabled);
+-	if (status4 & ~tp->intr4_enabled)
+-		printk("Intr 4 Status error. status = 0x%X, enable = 0x%X\n",
+-				status4, tp->intr4_enabled);
+-#endif
+-#define	INTERRUPT_SELECT			1
+-	if (status0)
+-		writel(status0 & tp->intr0_enabled, TOE_GLOBAL_BASE+GLOBAL_INTERRUPT_STATUS_0_REG);
+-	if (status1)
+-		writel(status1 & tp->intr1_enabled, TOE_GLOBAL_BASE+GLOBAL_INTERRUPT_STATUS_1_REG);
+-	if (status2)
+-		writel(status2 & tp->intr2_enabled, TOE_GLOBAL_BASE+GLOBAL_INTERRUPT_STATUS_2_REG);
+-	if (status3)
+-		writel(status3 & tp->intr3_enabled, TOE_GLOBAL_BASE+GLOBAL_INTERRUPT_STATUS_3_REG);
+-	if (status4)
+-		writel(status4 & tp->intr4_enabled, TOE_GLOBAL_BASE+GLOBAL_INTERRUPT_STATUS_4_REG);
+-
+-	/* handle freeq interrupt first */
+-	if (status4 & tp->intr4_enabled) {
+-		if ((status4 & SWFQ_EMPTY_INT_BIT) && (tp->intr4_enabled & SWFQ_EMPTY_INT_BIT))
+-		{
+-			// unsigned long data = REG32(TOE_GLOBAL_BASE + GLOBAL_SWFQ_RWPTR_REG);
+-			//gmac_write_reg(TOE_GLOBAL_BASE, GLOBAL_INTERRUPT_ENABLE_4_REG,
+-			//	tp->intr4_enabled & ~SWFQ_EMPTY_INT_BIT, SWFQ_EMPTY_INT_BIT);
+-
+-			//gmac_write_reg(TOE_GLOBAL_BASE, GLOBAL_INTERRUPT_STATUS_4_REG,
+-			//	SWFQ_EMPTY_INT_BIT, SWFQ_EMPTY_INT_BIT);
+-			if (toe->gmac[0].dev && netif_running(toe->gmac[0].dev))
+-				toe_gmac_handle_default_rxq(toe->gmac[0].dev,&toe->gmac[0]);
+-			if (toe->gmac[1].dev && netif_running(toe->gmac[1].dev))
+-				toe_gmac_handle_default_rxq(toe->gmac[1].dev,&toe->gmac[1]);
+-			printk("\nfreeq int\n");
+-			toe_gmac_fill_free_q();
+-			tp->sw_fq_empty_cnt++;
+-
+-			gmac_write_reg(TOE_GLOBAL_BASE, GLOBAL_INTERRUPT_STATUS_4_REG, status4,
+-				SWFQ_EMPTY_INT_BIT);
+-		}
+-	}
+-
+-	// Interrupt Status 1
+-	if (status1 & tp->intr1_enabled)
+-	{
+-		#define G1_INTR0_BITS	(GMAC1_HWTQ13_EOF_INT_BIT | GMAC1_HWTQ12_EOF_INT_BIT | GMAC1_HWTQ11_EOF_INT_BIT | GMAC1_HWTQ10_EOF_INT_BIT)
+-		#define G0_INTR0_BITS	(GMAC0_HWTQ03_EOF_INT_BIT | GMAC0_HWTQ02_EOF_INT_BIT | GMAC0_HWTQ01_EOF_INT_BIT | GMAC0_HWTQ00_EOF_INT_BIT)
+-		// Handle GMAC 0/1 HW Tx queue 0-3 EOF events
+-		// Only count
+-		// TOE, Classification, and default queues interrupts are handled by ISR
+-		// because they should pass packets to upper layer
+-		if (tp->port_id == 0)
+-		{
+-#ifndef	INTERRUPT_SELECT
+-			if (netif_running(dev) && (status1 & G0_INTR0_BITS) && (tp->intr1_enabled & G0_INTR0_BITS))
+-			{
+-				if (status1 & GMAC0_HWTQ03_EOF_INT_BIT)
+-					tp->hwtxq[3].eof_cnt++;
+-				if (status1 & GMAC0_HWTQ02_EOF_INT_BIT)
+-					tp->hwtxq[2].eof_cnt++;
+-				if (status1 & GMAC0_HWTQ01_EOF_INT_BIT)
+-					tp->hwtxq[1].eof_cnt++;
+-				if (status1 & GMAC0_HWTQ00_EOF_INT_BIT)
+-					tp->hwtxq[0].eof_cnt++;
+-#endif	//INTERRUPT_SELECT
+-#ifndef	INTERRUPT_SELECT
+-			}
+-#endif	//INTERRUPT_SELECT
+-			if (netif_running(dev) && (status1 & DEFAULT_Q0_INT_BIT) && (tp->intr1_enabled & DEFAULT_Q0_INT_BIT))
+-			{
+-				tp->default_q_intr_cnt++;
+-				toe_gmac_handle_default_rxq(dev, tp);
++		rcv_mask = SPI_read(2,0,0x10);			// Receive mask
++		rcv_mask |= 0x4F;
++		for(i=0;i<4;i++){
++			reg_val = BIT(26)|(i<<21)|(10<<16);
++			SPI_write(3,0,1,reg_val);
++			msleep(10);
++			reg_val = SPI_read(3,0,2);
++			if(reg_val & 0x0c00){
++				printk("Port%d:Giga mode\n",i);
++				SPI_write(1,i,0x00,0x300701B1);
++				SPI_write(1,i,0x00,0x10070181);
++				switch_pre_link[i]=LINK_UP;
++				switch_pre_speed[i]=GMAC_SPEED_1000;
+ 			}
+-#ifdef CONFIG_SL351x_RXTOE
+-			if (netif_running(dev) && (status1 & TOE_IQ_ALL_BITS) &&
+-			    (tp->intr1_enabled & TOE_IQ_ALL_BITS)) {
+-				//printk("status %x, bits %x, slct %x\n", status1, TOE_IQ_ALL_BITS, tp->intr1_selected);
+-				toe_gmac_handle_toeq(dev, tp, status1);
+-				//toe_gmac_handle_toeq(dev, toe, tp, status1);
++			else{
++				reg_val = BIT(26)|(i<<21)|(5<<16);
++				SPI_write(3,0,1,reg_val);
++				msleep(10);
++				ability = (reg_val = SPI_read(3,0,2)&0x5e0) >>5;
++				if ((ability & 0x0C)) /* 100M full duplex */
++				{
++					SPI_write(1,i,0x00,0x30050472);
++					SPI_write(1,i,0x00,0x10050442);
++					printk("Port%d:100M\n",i);
++					switch_pre_link[i]=LINK_UP;
++				switch_pre_speed[i]=GMAC_SPEED_100;
++				}
++				else if((ability & 0x03)) /* 10M full duplex */
++				{
++					SPI_write(1,i,0x00,0x30050473);
++					SPI_write(1,i,0x00,0x10050443);
++					printk("Port%d:10M\n",i);
++					switch_pre_link[i]=LINK_UP;
++					switch_pre_speed[i]=GMAC_SPEED_10;
++				}
++				else{
++					SPI_write(1,i,0x00,BIT(16));			// disable RX
++					SPI_write(5,0,0x0E,BIT(i));			// dicard packet
++					while((SPI_read(5,0,0x0C)&BIT(i))==0)		// wait to be empty
++						msleep(1);
++
++					SPI_write(1,i,0x00,0x20000030);			// PORT_RST
++					switch_pre_link[i]=LINK_DOWN;
++					switch_pre_speed[i]=GMAC_SPEED_10;
++					rcv_mask &= ~BIT(i);
++					SPI_write(2,0,0x10,rcv_mask);			// Disable Receive
++				}
+ 			}
+-#endif
+ 		}
+-		else if (tp->port_id == 1)
+-		{
+-#ifndef	INTERRUPT_SELECT
+-			if (netif_running(dev) && (status1 & G1_INTR0_BITS) && (tp->intr1_enabled & G1_INTR0_BITS))
+-			{
+-				if (status1 & GMAC1_HWTQ13_EOF_INT_BIT)
+-					tp->hwtxq[3].eof_cnt++;
+-				if (status1 & GMAC1_HWTQ12_EOF_INT_BIT)
+-					tp->hwtxq[2].eof_cnt++;
+-				if (status1 & GMAC1_HWTQ11_EOF_INT_BIT)
+-					tp->hwtxq[1].eof_cnt++;
+-				if (status1 & GMAC1_HWTQ10_EOF_INT_BIT)
+-					tp->hwtxq[0].eof_cnt++;
+-#endif	//INTERRUPT_SELECT
+-#ifndef	INTERRUPT_SELECT
+-			}
+-#endif	//INTERRUPT_SELECT
+-			if (netif_running(dev) && (status1 & DEFAULT_Q1_INT_BIT) && (tp->intr1_enabled & DEFAULT_Q1_INT_BIT))
+-			{
+-				tp->default_q_intr_cnt++;
+-				toe_gmac_handle_default_rxq(dev, tp);
+-			}
+-#ifdef CONFIG_SL351x_RXTOE
+-			if (netif_running(dev) && (status1 & TOE_IQ_ALL_BITS) &&
+-			    (tp->intr1_enabled & TOE_IQ_ALL_BITS)) {
+-				//printk("status %x, bits %x, slct %x\n", status1, TOE_IQ_ALL_BITS, tp->intr1_selected);
+-				toe_gmac_handle_toeq(dev, tp, status1);
+-				//toe_gmac_handle_toeq(dev, toe, tp, status1);
+-			}
+ #endif
+-		}
++		gmac_get_switch_status(dev);
++		gmac_write_reg(tp->base_addr, GMAC_STATUS, 0x7d, 0x0000007f);
++//		SPI_write(2,0,0x10,rcv_mask);			// Enable Receive
++		return ;
+ 	}
++#endif
+ 
++	reg_val = gmac_get_phy_vendor(tp->phy_addr);
++	printk("GMAC-%d Addr %d Vendor ID: 0x%08x\n", tp->port_id, tp->phy_addr, reg_val);
+ 
+-	// Interrupt Status 0
+-	if (status0 & tp->intr0_enabled)
+-	{
+-
+-		#define ERR_INTR_BITS	(GMAC0_TXDERR_INT_BIT | GMAC0_TXPERR_INT_BIT |	\
+-								 GMAC1_TXDERR_INT_BIT | GMAC1_TXPERR_INT_BIT |	\
+-								 GMAC0_RXDERR_INT_BIT | GMAC0_RXPERR_INT_BIT |	\
+-								 GMAC1_RXDERR_INT_BIT | GMAC1_RXPERR_INT_BIT)
+-#ifndef	INTERRUPT_SELECT
+-		if (status0 &  ERR_INTR_BITS)
+-		{
+-			if ((status0 & GMAC0_TXDERR_INT_BIT) && (tp->intr0_enabled & GMAC0_TXDERR_INT_BIT))
+-			{
+-				tp->txDerr_cnt[0]++;
+-				printk("GMAC0 TX AHB Bus Error!\n");
+-			}
+-			if ((status0 & GMAC0_TXPERR_INT_BIT) && (tp->intr0_enabled & GMAC0_TXPERR_INT_BIT))
+-			{
+-				tp->txPerr_cnt[0]++;
+-				printk("GMAC0 Tx Descriptor Protocol Error!\n");
+-			}
+-			if ((status0 & GMAC1_TXDERR_INT_BIT) && (tp->intr0_enabled & GMAC1_TXDERR_INT_BIT))
+-			{
+-				tp->txDerr_cnt[1]++;
+-				printk("GMAC1 Tx AHB Bus Error!\n");
+-			}
+-			if ((status0 & GMAC1_TXPERR_INT_BIT) && (tp->intr0_enabled & GMAC1_TXPERR_INT_BIT))
+-			{
+-				tp->txPerr_cnt[1]++;
+-				printk("GMAC1 Tx Descriptor Protocol Error!\n");
+-			}
+-
+-			if ((status0 & GMAC0_RXDERR_INT_BIT) && (tp->intr0_enabled & GMAC0_RXDERR_INT_BIT))
+-			{
+-				tp->RxDerr_cnt[0]++;
+-				printk("GMAC0 Rx AHB Bus Error!\n");
+-			}
+-			if ((status0 & GMAC0_RXPERR_INT_BIT) && (tp->intr0_enabled & GMAC0_RXPERR_INT_BIT))
+-			{
+-				tp->RxPerr_cnt[0]++;
+-				printk("GMAC0 Rx Descriptor Protocol Error!\n");
+-			}
+-			if ((status0 & GMAC1_RXDERR_INT_BIT) && (tp->intr0_enabled & GMAC1_RXDERR_INT_BIT))
+-			{
+-				tp->RxDerr_cnt[1]++;
+-				printk("GMAC1 Rx AHB Bus Error!\n");
+-			}
+-			if ((status0 & GMAC1_RXPERR_INT_BIT) && (tp->intr0_enabled & GMAC1_RXPERR_INT_BIT))
+-			{
+-				tp->RxPerr_cnt[1]++;
+-				printk("GMAC1 Rx Descriptor Protocol Error!\n");
+-			}
+-		}
+-#endif	//INTERRUPT_SELECT
+-#ifndef	GMAX_TX_INTR_DISABLED
+-		if (tp->port_id == 1 &&	netif_running(dev) &&
+-			(((status0 & GMAC1_SWTQ10_FIN_INT_BIT) && (tp->intr0_enabled & GMAC1_SWTQ10_FIN_INT_BIT))
+-			||
+-			((status0 & GMAC1_SWTQ10_EOF_INT_BIT) && (tp->intr0_enabled & GMAC1_SWTQ10_EOF_INT_BIT))))
+-		{
+-			toe_gmac_tx_complete(&toe_private_data.gmac[1], 0, dev, 1);
+-		}
+-
+-		if (tp->port_id == 0 &&	netif_running(dev) &&
+-			(((status0 & GMAC0_SWTQ00_FIN_INT_BIT) && (tp->intr0_enabled & GMAC0_SWTQ00_FIN_INT_BIT))
+-			||
+-			((status0 & GMAC0_SWTQ00_EOF_INT_BIT) && (tp->intr0_enabled & GMAC0_SWTQ00_EOF_INT_BIT))))
+-		{
+-			toe_gmac_tx_complete(&toe_private_data.gmac[0], 0, dev, 1);
+-		}
+-#endif
+-		// clear enabled status bits
+-	}
+-	// Interrupt Status 4
+-#ifndef	INTERRUPT_SELECT
+-	if (status4 & tp->intr4_enabled)
+-	{
+-		#define G1_INTR4_BITS		(0xff000000)
+-		#define G0_INTR4_BITS		(0x00ff0000)
+-
+-		if (tp->port_id == 0)
+-		{
+-			if ((status4 & G0_INTR4_BITS) && (tp->intr4_enabled & G0_INTR4_BITS))
+-			{
+-				if (status4 & GMAC0_RESERVED_INT_BIT)
+-					printk("GMAC0_RESERVED_INT_BIT is ON\n");
+-				if (status4 & GMAC0_MIB_INT_BIT)
+-					tp->mib_full_cnt++;
+-				if (status4 & GMAC0_RX_PAUSE_ON_INT_BIT)
+-					tp->rx_pause_on_cnt++;
+-				if (status4 & GMAC0_TX_PAUSE_ON_INT_BIT)
+-					tp->tx_pause_on_cnt++;
+-				if (status4 & GMAC0_RX_PAUSE_OFF_INT_BIT)
+-					tp->rx_pause_off_cnt++;
+-				if (status4 & GMAC0_TX_PAUSE_OFF_INT_BIT)
+-					tp->rx_pause_off_cnt++;
+-				if (status4 & GMAC0_RX_OVERRUN_INT_BIT)
+-					tp->rx_overrun_cnt++;
+-				if (status4 & GMAC0_STATUS_CHANGE_INT_BIT)
+-					tp->status_changed_cnt++;
+-			}
+-		}
+-		else if (tp->port_id == 1)
+-		{
+-			if ((status4 & G1_INTR4_BITS) && (tp->intr4_enabled & G1_INTR4_BITS))
+-			{
+-				if (status4 & GMAC1_RESERVED_INT_BIT)
+-					printk("GMAC1_RESERVED_INT_BIT is ON\n");
+-				if (status4 & GMAC1_MIB_INT_BIT)
+-					tp->mib_full_cnt++;
+-				if (status4 & GMAC1_RX_PAUSE_ON_INT_BIT)
+-				{
+-					//printk("Gmac pause on\n");
+-					tp->rx_pause_on_cnt++;
+-				}
+-				if (status4 & GMAC1_TX_PAUSE_ON_INT_BIT)
+-				{
+-					//printk("Gmac pause on\n");
+-					tp->tx_pause_on_cnt++;
+-				}
+-				if (status4 & GMAC1_RX_PAUSE_OFF_INT_BIT)
+-				{
+-					//printk("Gmac pause off\n");
+-					tp->rx_pause_off_cnt++;
+-				}
+-				if (status4 & GMAC1_TX_PAUSE_OFF_INT_BIT)
+-				{
+-					//printk("Gmac pause off\n");
+-					tp->rx_pause_off_cnt++;
+-				}
+-				if (status4 & GMAC1_RX_OVERRUN_INT_BIT)
+-				{
+-					//printk("Gmac Rx Overrun \n");
+-					tp->rx_overrun_cnt++;
+-				}
+-				if (status4 & GMAC1_STATUS_CHANGE_INT_BIT)
+-					tp->status_changed_cnt++;
+-			}
+-		}
+-#if 0
+-		if ((status4 & SWFQ_EMPTY_INT_BIT) && (tp->intr4_enabled & SWFQ_EMPTY_INT_BIT))
+-		{
+-			// unsigned long data = REG32(TOE_GLOBAL_BASE + GLOBAL_SWFQ_RWPTR_REG);
+-//			mac_stop_rxdma(tp->sc);
+-			gmac_write_reg(TOE_GLOBAL_BASE, GLOBAL_INTERRUPT_ENABLE_4_REG,
+-				tp->intr4_enabled & ~SWFQ_EMPTY_INT_BIT, SWFQ_EMPTY_INT_BIT);
+-
+-			gmac_write_reg(TOE_GLOBAL_BASE, GLOBAL_INTERRUPT_STATUS_4_REG,
+-				SWFQ_EMPTY_INT_BIT, SWFQ_EMPTY_INT_BIT);
+-			toe_gmac_fill_free_q();
+-			tp->sw_fq_empty_cnt++;
+-
+-			gmac_write_reg(TOE_GLOBAL_BASE, GLOBAL_INTERRUPT_STATUS_4_REG, status4,
+-				SWFQ_EMPTY_INT_BIT);
+-//#if 0
+-/*			if (netif_running(dev))
+-				toe_gmac_handle_default_rxq(dev, tp);
+-			printk("SWFQ_EMPTY_INT_BIT is ON!\n");	// should not be happened */
+-//#endif
+-		}
+-#endif
+-	}
+-#endif	//INTERRUPT_SELECT
+-	toe_gmac_enable_interrupt(tp->irq);
+-//enable gmac rx function when do RFC 2544
+-#ifdef IxscriptMate_1518
+-	if (storlink_ctl.pauseoff == 1)
+-	{
+-		GMAC_CONFIG0_T config0;
+-		config0.bits32 = readl(TOE_GMAC0_BASE+GMAC_CONFIG0);
+-		config0.bits.dis_rx = 0;
+-		writel(config0.bits32, TOE_GMAC0_BASE+GMAC_CONFIG0);
+-		config0.bits32 = readl(TOE_GMAC1_BASE+GMAC_CONFIG0);
+-		config0.bits.dis_rx = 0;
+-		writel(config0.bits32, TOE_GMAC1_BASE+GMAC_CONFIG0);
+-	}
+-#endif
+-	//printk("gmac_interrupt complete!\n\n");
+-//	return IRQ_RETVAL(handled);
+-	return	IRQ_RETVAL(1);
+-#ifdef CONFIG_SL_NAPI
+-}
+-#endif
+-}
+-
+-/*----------------------------------------------------------------------
+-*	toe_gmac_handle_default_rxq
+-*	(1) Get rx Buffer for default Rx queue
+-*	(2) notify or call upper-routine to handle it
+-*	(3) get a new buffer and insert it into SW free queue
+-*	(4) Note: The SW free queue Read-Write Pointer should be locked when accessing
+-*----------------------------------------------------------------------*/
+-//static inline void toe_gmac_handle_default_rxq(struct net_device *dev, GMAC_INFO_T *tp)
+-static void toe_gmac_handle_default_rxq(struct net_device *dev, GMAC_INFO_T *tp)
+-{
+-	TOE_INFO_T			*toe;
+-    GMAC_RXDESC_T   	*curr_desc;
+-	struct sk_buff 		*skb;
+-    DMA_RWPTR_T			rwptr;
+-	unsigned int 		pkt_size;
+-	int					max_cnt;
+-	unsigned int        desc_count;
+-	unsigned int        good_frame, chksum_status, rx_status;
+-	struct net_device_stats *isPtr = (struct net_device_stats *)&tp->ifStatics;
+-
+-//when do ixia RFC 2544 test and packet size is select 1518 bytes,disable gmace rx function immediately after one interrupt come in.
+-#ifdef IxscriptMate_1518
+-	if (storlink_ctl.pauseoff == 1)
+-	{
+-		GMAC_CONFIG0_T config0;
+-		config0.bits32 = readl(TOE_GMAC0_BASE+GMAC_CONFIG0);
+-		config0.bits.dis_rx = 1;
+-		writel(config0.bits32, TOE_GMAC0_BASE+GMAC_CONFIG0);
+-		config0.bits32 = readl(TOE_GMAC1_BASE+GMAC_CONFIG0);
+-		config0.bits.dis_rx = 1;
+-		writel(config0.bits32, TOE_GMAC1_BASE+GMAC_CONFIG0);
+-	}
+-#endif
+-	rwptr.bits32 = readl(&tp->default_qhdr->word1);
+-#if 0
+-	if (rwptr.bits.rptr != tp->rx_rwptr.bits.rptr)
+-	{
+-		mac_stop_txdma((struct net_device *)tp->dev);
+-		printk("Default Queue HW RD ptr (0x%x) != SW RD Ptr (0x%x)\n",
+-				rwptr.bits32, tp->rx_rwptr.bits.rptr);
+-		while(1);
+-	}
+-#endif
+-	toe = (TOE_INFO_T *)&toe_private_data;
+-	max_cnt = DEFAULT_RXQ_MAX_CNT;
+-	while ((--max_cnt) && rwptr.bits.rptr != rwptr.bits.wptr)
+-//	while (rwptr.bits.rptr != rwptr.bits.wptr)
+-	{
+-//if packet size is not 1518 for RFC 2544,enable gmac rx function.The other packet size have RX workaround.
+-#ifdef IxscriptMate_1518
+-    	if (storlink_ctl.pauseoff == 1)
+-		{
+-			if (pkt_size != 1514)
+-			{
+-						GMAC_CONFIG0_T config0;
+-						config0.bits32 = readl(TOE_GMAC0_BASE+GMAC_CONFIG0);
+-						config0.bits.dis_rx = 0;
+-						writel(config0.bits32, TOE_GMAC0_BASE+GMAC_CONFIG0);
+-						config0.bits32 = readl(TOE_GMAC1_BASE+GMAC_CONFIG0);
+-						config0.bits.dis_rx = 0;
+-						writel(config0.bits32, TOE_GMAC1_BASE+GMAC_CONFIG0);
+-			}
+-		}
+-#endif
+-    	curr_desc = (GMAC_RXDESC_T *)tp->default_desc_base + rwptr.bits.rptr;
+-//		consistent_sync(curr_desc, sizeof(GMAC_RXDESC_T), PCI_DMA_FROMDEVICE);
+-		tp->default_q_cnt++;
+-    	tp->rx_curr_desc = (unsigned int)curr_desc;
+-    	rx_status = curr_desc->word0.bits.status;
+-    	chksum_status = curr_desc->word0.bits.chksum_status;
+-    	tp->rx_status_cnt[rx_status]++;
+-    	tp->rx_chksum_cnt[chksum_status]++;
+-        pkt_size = curr_desc->word1.bits.byte_count;  /*total byte count in a frame*/
+-		desc_count = curr_desc->word0.bits.desc_count; /* get descriptor count per frame */
+-		good_frame=1;
+-		if ((curr_desc->word0.bits32 & (GMAC_RXDESC_0_T_derr | GMAC_RXDESC_0_T_perr))
+-			|| (pkt_size < 60)
+-		    || (chksum_status & 0x4)
+-			|| rx_status)
+-		{
+-			good_frame = 0;
+-			if (curr_desc->word0.bits32 & GMAC_RXDESC_0_T_derr)
+-				printk("%s::derr (GMAC-%d)!!!\n", __func__, tp->port_id);
+-			if (curr_desc->word0.bits32 & GMAC_RXDESC_0_T_perr)
+-				printk("%s::perr (GMAC-%d)!!!\n", __func__, tp->port_id);
+-			if (rx_status)
+-			{
+-				if (rx_status == 4 || rx_status == 7)
+-					isPtr->rx_crc_errors++;
+-//				printk("%s::Status=%d (GMAC-%d)!!!\n", __func__, rx_status, tp->port_id);
+-			}
+-#ifdef SL351x_GMAC_WORKAROUND
+-			else if (pkt_size < 60)
+-			{
+-				if (tp->short_frames_cnt < GMAC_SHORT_FRAME_THRESHOLD)
+-					tp->short_frames_cnt++;
+-				if (tp->short_frames_cnt >= GMAC_SHORT_FRAME_THRESHOLD)
+-				{
+-					GMAC_CONFIG0_T config0;
+-					config0.bits32 = readl(TOE_GMAC0_BASE+GMAC_CONFIG0);
+-					config0.bits.dis_rx = 1;
+-					writel(config0.bits32, TOE_GMAC0_BASE+GMAC_CONFIG0);
+-					config0.bits32 = readl(TOE_GMAC1_BASE+GMAC_CONFIG0);
+-					config0.bits.dis_rx = 1;
+-					writel(config0.bits32, TOE_GMAC1_BASE+GMAC_CONFIG0);
+-				}
+-			}
+-#endif
+-//			if (chksum_status)
+-//				printk("%s::Checksum Status=%d (GMAC-%d)!!!\n", __func__, chksum_status, tp->port_id);
+-			skb = (struct sk_buff *)(REG32(__va(curr_desc->word2.buf_adr) - SKB_RESERVE_BYTES));
+-			dev_kfree_skb_irq(skb);
+-		}
+-		if (good_frame)
+-		{
+-			if (curr_desc->word0.bits.drop)
+-				printk("%s::Drop (GMAC-%d)!!!\n", __func__, tp->port_id);
+-//			if (chksum_status)
+-//				printk("%s::Checksum Status=%d (GMAC-%d)!!!\n", __func__, chksum_status, tp->port_id);
+-
+-	    	/* get frame information from the first descriptor of the frame */
+-#ifdef SL351x_GMAC_WORKAROUND
+-			if (tp->short_frames_cnt >= GMAC_SHORT_FRAME_THRESHOLD)
+-			{
+-				GMAC_CONFIG0_T config0;
+-				config0.bits32 = readl(TOE_GMAC0_BASE+GMAC_CONFIG0);
+-				config0.bits.dis_rx = 0;
+-				writel(config0.bits32, TOE_GMAC0_BASE+GMAC_CONFIG0);
+-				config0.bits32 = readl(TOE_GMAC1_BASE+GMAC_CONFIG0);
+-				config0.bits.dis_rx = 0;
+-				writel(config0.bits32, TOE_GMAC1_BASE+GMAC_CONFIG0);
+-			}
+-			tp->short_frames_cnt = 0;
+-#endif
+-			isPtr->rx_packets++;
+-			skb = (struct sk_buff *)(REG32(__va(curr_desc->word2.buf_adr - SKB_RESERVE_BYTES)));
+-			if (!skb)
+-			{
+-				printk("Fatal Error!!skb==NULL\n");
+-				goto next_rx;
+-			}
+-			tp->curr_rx_skb = skb;
+-			// consistent_sync((void *)__va(curr_desc->word2.buf_adr), pkt_size, PCI_DMA_FROMDEVICE);
+-
+-	//		curr_desc->word2.buf_adr = 0;
+-
+-			skb_reserve (skb, RX_INSERT_BYTES);	/* 16 byte align the IP fields. */
+-			skb_put(skb, pkt_size);
+-			skb->dev = dev;
+-			if (chksum_status == RX_CHKSUM_IP_UDP_TCP_OK)
+-			{
+-				skb->ip_summed = CHECKSUM_UNNECESSARY;
+-#ifdef CONFIG_SL351x_NAT
+-				if (nat_cfg.enabled && curr_desc->word3.bits.l3_offset && curr_desc->word3.bits.l4_offset)
+-				{
+-					struct iphdr	*ip_hdr;
+-					ip_hdr = (struct iphdr *)&(skb->data[curr_desc->word3.bits.l3_offset]);
+-					sl351x_nat_input(skb,
+-									tp->port_id,
+-									(void *)curr_desc->word3.bits.l3_offset,
+-								  	(void *)curr_desc->word3.bits.l4_offset);
+-				}
+-#endif
+-				skb->protocol = eth_type_trans(skb,dev); /* set skb protocol */
+-#if 0
+-#ifdef CONFIG_SL351x_RXTOE
+-				if (storlink_ctl.rx_max_pktsize) {
+-					struct iphdr	*ip_hdr;
+-					struct tcphdr	*tcp_hdr;
+-					int ip_hdrlen;
+-
+- 					ip_hdr = (struct iphdr*)&(skb->data[0]);
+-					if ((skb->protocol == __constant_htons(ETH_P_IP)) &&
+-					   ((ip_hdr->protocol & 0x00ff) == IPPROTO_TCP)) {
+-						ip_hdrlen = ip_hdr->ihl << 2;
+-						tcp_hdr = (struct tcphdr*)&(skb->data[ip_hdrlen]);
+-						if (tcp_hdr->syn) {
+-							struct toe_conn* connection = init_toeq(ip_hdr->version,
+-									ip_hdr, tcp_hdr, toe, &(skb->data[0]) - 14);
+-							TCP_SKB_CB(skb)->connection = connection;
+-							//	hash_dump_entry(TCP_SKB_CB(skb)->connection->hash_entry_index);
+-							//		printk("%s::skb data %x, conn %x, mode %x\n",
+-							//			__func__, skb->data, connection, connection->mode);
+-						}
+-					}
+-				}
+-#endif
+-#endif
+-			}
+-			else if (chksum_status == RX_CHKSUM_IP_OK_ONLY)
+-			{
+-				skb->ip_summed = CHECKSUM_UNNECESSARY;
+-#ifdef CONFIG_SL351x_NAT
+-				if (nat_cfg.enabled && curr_desc->word3.bits.l3_offset && curr_desc->word3.bits.l4_offset)
+-				{
+-					struct iphdr		*ip_hdr;
+-					//struct tcphdr		*tcp_hdr;
+-					ip_hdr = (struct iphdr *)&(skb->data[curr_desc->word3.bits.l3_offset]);
+-					//tcp_hdr = (struct tcphdr *)&(skb->data[curr_desc->word3.bits.l4_offset]);
+-					if (ip_hdr->protocol == IPPROTO_UDP)
+-					{
+-						sl351x_nat_input(skb,
+-										tp->port_id,
+-										(void *)curr_desc->word3.bits.l3_offset,
+-								  		(void *)curr_desc->word3.bits.l4_offset);
+-					}
+-					else if (ip_hdr->protocol == IPPROTO_GRE)
+-					{
+-						sl351x_nat_input(skb,
+-									tp->port_id,
+-									(void *)curr_desc->word3.bits.l3_offset,
+-								  	(void *)curr_desc->word3.bits.l4_offset);
+-					}
+-				}
+-#endif
+-				skb->protocol = eth_type_trans(skb,dev); /* set skb protocol */
+-			}
+-			else
+-			{
+-				skb->protocol = eth_type_trans(skb,dev); /* set skb protocol */
+-			}
+-
+-			netif_rx(skb);  /* socket rx */
+-			dev->last_rx = jiffies;
+-
+-			isPtr->rx_bytes += pkt_size;
+-
+-        }
+-
+-next_rx:
+-		// advance one for Rx default Q 0/1
+-		rwptr.bits.rptr = RWPTR_ADVANCE_ONE(rwptr.bits.rptr, tp->default_desc_num);
+-		SET_RPTR(&tp->default_qhdr->word1, rwptr.bits.rptr);
+-     	tp->rx_rwptr.bits32 = rwptr.bits32;
+-
+-	}
+-
+-	/* Handles first available packets only then refill the queue. */
+-	toe_gmac_fill_free_q();
+-}
+-
+-/*----------------------------------------------------------------------
+-* gmac_get_phy_vendor
+-*----------------------------------------------------------------------*/
+-static unsigned int gmac_get_phy_vendor(int phy_addr)
+-{
+-    unsigned int	reg_val;
+-    reg_val=(mii_read(phy_addr,0x02) << 16) + mii_read(phy_addr,0x03);
+-    return reg_val;
+-}
+-
+-/*----------------------------------------------------------------------
+-* gmac_set_phy_status
+-*----------------------------------------------------------------------*/
+-void gmac_set_phy_status(struct net_device *dev)
+-{
+-	GMAC_INFO_T *tp = dev->priv;
+-	GMAC_STATUS_T   status;
+-	unsigned int    reg_val, ability,wan_port_id;
+-	unsigned int    i = 0;
+-
+-#ifdef VITESSE_G5SWITCH
+-	if((tp->port_id == GMAC_PORT1)&&(Giga_switch==1)){
+-#if 0
+-		rcv_mask = SPI_read(2,0,0x10);			// Receive mask
+-		rcv_mask |= 0x4F;
+-		for(i=0;i<4;i++){
+-			reg_val = BIT(26)|(i<<21)|(10<<16);
+-			SPI_write(3,0,1,reg_val);
+-			msleep(10);
+-			reg_val = SPI_read(3,0,2);
+-			if(reg_val & 0x0c00){
+-				printk("Port%d:Giga mode\n",i);
+-				SPI_write(1,i,0x00,0x300701B1);
+-				SPI_write(1,i,0x00,0x10070181);
+-				switch_pre_link[i]=LINK_UP;
+-				switch_pre_speed[i]=GMAC_SPEED_1000;
+-			}
+-			else{
+-				reg_val = BIT(26)|(i<<21)|(5<<16);
+-				SPI_write(3,0,1,reg_val);
+-				msleep(10);
+-				ability = (reg_val = SPI_read(3,0,2)&0x5e0) >>5;
+-				if ((ability & 0x0C)) /* 100M full duplex */
+-				{
+-					SPI_write(1,i,0x00,0x30050472);
+-					SPI_write(1,i,0x00,0x10050442);
+-					printk("Port%d:100M\n",i);
+-					switch_pre_link[i]=LINK_UP;
+-				switch_pre_speed[i]=GMAC_SPEED_100;
+-				}
+-				else if((ability & 0x03)) /* 10M full duplex */
+-				{
+-					SPI_write(1,i,0x00,0x30050473);
+-					SPI_write(1,i,0x00,0x10050443);
+-					printk("Port%d:10M\n",i);
+-					switch_pre_link[i]=LINK_UP;
+-					switch_pre_speed[i]=GMAC_SPEED_10;
+-				}
+-				else{
+-					SPI_write(1,i,0x00,BIT(16));			// disable RX
+-					SPI_write(5,0,0x0E,BIT(i));			// dicard packet
+-					while((SPI_read(5,0,0x0C)&BIT(i))==0)		// wait to be empty
+-						msleep(1);
+-
+-					SPI_write(1,i,0x00,0x20000030);			// PORT_RST
+-					switch_pre_link[i]=LINK_DOWN;
+-					switch_pre_speed[i]=GMAC_SPEED_10;
+-					rcv_mask &= ~BIT(i);
+-					SPI_write(2,0,0x10,rcv_mask);			// Disable Receive
+-				}
+-			}
+-		}
+-#endif
+-		gmac_get_switch_status(dev);
+-		gmac_write_reg(tp->base_addr, GMAC_STATUS, 0x7d, 0x0000007f);
+-//		SPI_write(2,0,0x10,rcv_mask);			// Enable Receive
+-		return ;
+-	}
+-#endif
+-
+-	reg_val = gmac_get_phy_vendor(tp->phy_addr);
+-	printk("GMAC-%d Addr %d Vendor ID: 0x%08x\n", tp->port_id, tp->phy_addr, reg_val);
+-
+-	switch (tp->phy_mode)
++	switch (tp->phy_mode)
+ 	{
+ 		case GMAC_PHY_GMII:
+ 		mii_write(tp->phy_addr,0x04,0x05e1); /* advertisement 100M full duplex, pause capable on */
+@@ -3552,6 +2982,7 @@
+ 		status.bits.link = LINK_DOWN;
+ 		//		clear_bit(__LINK_STATE_START, &dev->state);
+ 		printk("Link Down (0x%04x) ", reg_val);
++#ifdef VITESSE_G5SWITCH
+ 		if(Giga_switch == 1)
+ 		{
+ 				wan_port_id = 1;
+@@ -3565,6 +2996,7 @@
+ 				storlink_ctl.link[ tp->port_id] = 0;
+ #endif
+ 		}
++#endif
+ 	}
+ 	else
+ 	{
+@@ -3572,6 +3004,7 @@
+ 		status.bits.link = LINK_UP;
+ 		//		set_bit(__LINK_STATE_START, &dev->state);
+ 		printk("Link Up (0x%04x) ",reg_val);
++#ifdef VITESSE_G5SWITCH
+ 		if(Giga_switch == 1)
+ 		{
+ 				wan_port_id = 1;
+@@ -3585,6 +3018,7 @@
+ 				storlink_ctl.link[ tp->port_id] = 1;
+ #endif
+ 		}
++#endif
+ 	}
+ 	//    value = mii_read(PHY_ADDR,0x05);
+ 
+@@ -3863,6 +3297,7 @@
+ 			}
+ 		}
+ 		status.bits.link = LINK_UP; /* link up */
++#ifdef VITESSE_G5SWITCH
+ 		if(Giga_switch==1)
+ 		{
+ 				wan_port_id = 1;
+@@ -3874,6 +3309,7 @@
+ 				storlink_ctl.link[ tp->port_id] = 1;
+ #endif
+ 		}
++#endif
+ 		if ((ability & 0x20)==0x20)
+ 		{
+ 			if (tp->flow_control_enable == 0)
+@@ -3914,6 +3350,7 @@
+ 	else
+ 	{
+ 		status.bits.link = LINK_DOWN; /* link down */
++#ifdef VITESSE_G5SWITCH
+ 		if(Giga_switch == 1)
+ 		{
+ 				wan_port_id = 1;
+@@ -3925,6 +3362,7 @@
+ 				storlink_ctl.link[ tp->port_id] = 0;
+ #endif
+ 		}
++#endif
+ 		if (tp->pre_phy_status == LINK_UP)
+ 		{
+ 			printk("GMAC-%d LINK_Down......\n",tp->port_id);
+@@ -4298,86 +3736,102 @@
+ }
+ 
+ #ifdef CONFIG_SL_NAPI
++
++static int gmax_rx(struct net_device *dev, int *budget)
++{
++	return 0;
++}
++
++static int gmac_tx(struct net_device *dev, int *budget)
++{
++	return 0;
++}
++
+ /*----------------------------------------------------------------------
+ * gmac_rx_poll
+ *----------------------------------------------------------------------*/
+ static int gmac_rx_poll(struct net_device *dev, int *budget)
+ {
+-	TOE_INFO_T			*toe;
+-    GMAC_RXDESC_T   	*curr_desc;
+-	struct sk_buff 		*skb;
+-    DMA_RWPTR_T			rwptr;
+-    unsigned int data32;
+-	unsigned int 		pkt_size;
+-	unsigned int        desc_count;
+-	unsigned int        good_frame, chksum_status, rx_status;
+-	int                 rx_pkts_num = 0;
+-	int                 quota = min(dev->quota, *budget);
+-	GMAC_INFO_T			*tp = (GMAC_INFO_T *)dev->priv;
+-	unsigned int		status4;
+-	volatile DMA_RWPTR_T	fq_rwptr;
+-	// int					max_cnt = TOE_SW_FREEQ_DESC_NUM;//TOE_SW_FREEQ_DESC_NUM = 64
+-	//unsigned long		rx_old_bytes;
++	TOE_INFO_T	*toe;
++	GMAC_RXDESC_T	*curr_desc;
++	struct sk_buff	*skb;
++	DMA_RWPTR_T	rwptr;
++	unsigned int	data32;
++	unsigned int	pkt_size;
++	unsigned int	desc_count;
++	unsigned int	good_frame, chksum_status, rx_status;
++	int		rx_pkts_num = 0;
++	int		quota = min(dev->quota, *budget);
++	GMAC_INFO_T	*tp = (GMAC_INFO_T *)dev->priv;
++	unsigned int	status1;
++	unsigned int	status4;
+ 	struct net_device_stats *isPtr = (struct net_device_stats *)&tp->ifStatics;
+-	//unsigned long long	rx_time;
+-
+ 
+ 	BUG_ON(rx_poll_enabled == 0);
+-#if 1
+-	if (do_again)
+-	{
+-			toe_gmac_fill_free_q();
+-			status4 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_STATUS_4_REG);
+-			fq_rwptr.bits32 = readl(TOE_GLOBAL_BASE + GLOBAL_SWFQ_RWPTR_REG);
+-			//printk("\n%s:: do_again toe_gmac_fill_free_q =======>status4=0x%x =====fq_rwptr =0x%8x======>JKJKJKJKJKJKJKJKJ \n", __func__,status4,fq_rwptr.bits32);
+-			if (fq_rwptr.bits.wptr != fq_rwptr.bits.rptr)
+-			{
+-						//status4 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_STATUS_4_REG);
+-						do_again =0;
+-						//netif_rx_complete(dev);
+-						gmac_write_reg(TOE_GLOBAL_BASE, GLOBAL_INTERRUPT_STATUS_4_REG, status4,	0x1);
+-						fq_rwptr.bits32 = readl(TOE_GLOBAL_BASE + GLOBAL_SWFQ_RWPTR_REG);
+-						rwptr.bits32 = readl(&tp->default_qhdr->word1);
+-			}
+-			else
+-				return 1;
+-	}
+-#endif
+-	rwptr.bits32 = readl(&tp->default_qhdr->word1);
+-#if 0
+-	if (rwptr.bits.rptr != tp->rx_rwptr.bits.rptr)
+-	{
+-		mac_stop_txdma((struct net_device *)tp->dev);
+-		printk("Default Queue HW RD ptr (0x%x) != SW RD Ptr (0x%x)\n",
+-				rwptr.bits32, tp->rx_rwptr.bits.rptr);
+-		while(1);
+-	}
+-#endif
++
+ 	toe = (TOE_INFO_T *)&toe_private_data;
+ 
+-	fq_rwptr.bits32 = readl(TOE_GLOBAL_BASE + GLOBAL_SWFQ_RWPTR_REG);
+-	//printk("%s:---Before-------------->Default Queue HW RW ptr (0x%8x),   fq_rwptr =0x%8x \n",__func__,rwptr.bits32,fq_rwptr.bits32 );
+-	//printk("%s:---Before while   rx_pkts_num=%d------rx_finished_idx=0x%x------->Default_Q [rwptr.bits.rptr(SW)=0x%x,   rwptr.bits.wptr(HW) = 0x%x ]---->Free_Q(SW_HW) = 0x%8x \n",__func__,rx_pkts_num,rx_finished_idx,rwptr.bits.rptr,rwptr.bits.wptr,fq_rwptr.bits32 );
+-//	while ((--max_cnt) && (rwptr.bits.rptr != rwptr.bits.wptr) && (rx_pkts_num < quota))
++rx_poll_retry:
++	status1 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_STATUS_1_REG);
++	if (status1 & 1) {
++		writel(1, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_STATUS_1_REG);
++	}
+ 
++	rwptr.bits32 = readl(&tp->default_qhdr->word1);
+ 	while ((rwptr.bits.rptr != rwptr.bits.wptr) && (rx_pkts_num < quota))
+ 	{
+-
+-    	curr_desc = (GMAC_RXDESC_T *)tp->default_desc_base + rwptr.bits.rptr;
++		curr_desc = (GMAC_RXDESC_T *)tp->default_desc_base + rwptr.bits.rptr;
+ 		tp->default_q_cnt++;
+-    	tp->rx_curr_desc = (unsigned int)curr_desc;
+-    	rx_status = curr_desc->word0.bits.status;
+-    	chksum_status = curr_desc->word0.bits.chksum_status;
+-    	tp->rx_status_cnt[rx_status]++;
+-    	tp->rx_chksum_cnt[chksum_status]++;
+-        pkt_size = curr_desc->word1.bits.byte_count;  /*total byte count in a frame*/
++		tp->rx_curr_desc = (unsigned int)curr_desc;
++		rx_status = curr_desc->word0.bits.status;
++		chksum_status = curr_desc->word0.bits.chksum_status;
++		tp->rx_status_cnt[rx_status]++;
++		tp->rx_chksum_cnt[chksum_status]++;
++		pkt_size = curr_desc->word1.bits.byte_count;  /*total byte count in a frame*/
+ 		desc_count = curr_desc->word0.bits.desc_count; /* get descriptor count per frame */
+ 		good_frame=1;
++
++		if (0) {
++
++				int free, busy;
++				uint32_t rwptr1;
++				uint32_t rwptr2;
++
++				rwptr1 = readl(TOE_GLOBAL_BASE + GLOBAL_SWFQ_RWPTR_REG);
++				free = (GET_WPTR(rwptr1) - GET_RPTR(rwptr1)) & 0xFF;
++
++				rwptr2 = readl(&tp->default_qhdr->word1);
++				busy = (GET_RPTR(rwptr2) - GET_WPTR(rwptr2)) & 0xFF;
++
++				if (GET_WPTR(rwptr1) == GET_RPTR(rwptr1)) {
++					printk("frame  status: %d\n"
++					       "SWFQ: wptr: %hu, rptr: %hu, free: %d\n"
++					       "GMAC: wptr: %hu, rptr: %hu, free: %d\n",
++					       rx_status,
++					       GET_WPTR(rwptr1), GET_RPTR(rwptr1), free,
++					       GET_WPTR(rwptr2), GET_RPTR(rwptr2), busy);
++				}
++		}
++
++		{
++			GMAC_RXDESC_T	*fq_desc;
++			void *data;
++			struct sk_buff *skb;
++			unsigned short idx;
++
++			skb = (struct sk_buff *)(REG32(__va(curr_desc->word2.buf_adr) - SKB_RESERVE_BYTES));
++			idx = (unsigned short)(REG32(__va(curr_desc->word2.buf_adr) - SKB_RESERVE_BYTES + 4));
++
++			BUG_ON(idx > TOE_SW_FREEQ_DESC_NUM);
++			BUG_ON(skb == NULL);
++			fq_desc = (GMAC_RXDESC_T*)toe->swfq_desc_base + idx;
++			fq_desc->word2.buf_adr = 0;
++		}
++
+ 		if ((curr_desc->word0.bits32 & (GMAC_RXDESC_0_T_derr | GMAC_RXDESC_0_T_perr))
+-			|| (pkt_size < 60)
++		    || (pkt_size < 60)
+ 		    || (chksum_status & 0x4)
+ 		    || rx_status )
+-//			|| rx_status || (rwptr.bits.rptr > rwptr.bits.wptr ))
+ 		{
+ 			good_frame = 0;
+ 			if (curr_desc->word0.bits32 & GMAC_RXDESC_0_T_derr)
+@@ -4388,7 +3842,6 @@
+ 			{
+ 				if (rx_status == 4 || rx_status == 7)
+ 					isPtr->rx_crc_errors++;
+-//				printk("%s::Status=%d (GMAC-%d)!!!\n", __func__, rx_status, tp->port_id);
+ 			}
+ #ifdef SL351x_GMAC_WORKAROUND
+ 			else if (pkt_size < 60)
+@@ -4407,17 +3860,32 @@
+ 				}
+ 			}
+ #endif
+-//			if (chksum_status)
+-//				printk("%s::Checksum Status=%d (GMAC-%d)!!!\n", __func__, chksum_status, tp->port_id);
+ 			skb = (struct sk_buff *)(REG32(__va(curr_desc->word2.buf_adr) - SKB_RESERVE_BYTES));
+-			dev_kfree_skb_irq(skb);
++			dev_kfree_skb(skb);
++
++			if (0) {
++				int free, busy;
++				uint32_t rwptr1;
++				uint32_t rwptr2;
++
++				rwptr1 = readl(TOE_GLOBAL_BASE + GLOBAL_SWFQ_RWPTR_REG);
++				free = (GET_WPTR(rwptr1) - GET_RPTR(rwptr1)) & 0xFF;
++
++				rwptr2 = readl(&tp->default_qhdr->word1);
++				busy = (GET_RPTR(rwptr2) - GET_WPTR(rwptr2)) & 0xFF;
++
++				printk("frame  status: %d\n"
++				       "SWFQ: wptr: %hu, rptr: %hu, free: %d\n"
++				       "GMAC: wptr: %hu, rptr: %hu, free: %d\n",
++				       rx_status,
++				       GET_WPTR(rwptr1), GET_RPTR(rwptr1), free,
++				       GET_WPTR(rwptr2), GET_RPTR(rwptr2), busy);
++			}
+ 		}
+ 		if (good_frame)
+ 		{
+ 			if (curr_desc->word0.bits.drop)
+ 				printk("%s::Drop (GMAC-%d)!!!\n", __func__, tp->port_id);
+-//			if (chksum_status)
+-//				printk("%s::Checksum Status=%d (GMAC-%d)!!!\n", __func__, chksum_status, tp->port_id);
+ 
+ #ifdef SL351x_GMAC_WORKAROUND
+ 			if (tp->short_frames_cnt >= GMAC_SHORT_FRAME_THRESHOLD)
+@@ -4432,225 +3900,118 @@
+ 			}
+ 			tp->short_frames_cnt = 0;
+ #endif
+-	    	/* get frame information from the first descriptor of the frame */
++			/* get frame information from the first descriptor of the frame */
+ 			isPtr->rx_packets++;
+-			//consistent_sync((void *)__va(curr_desc->word2.buf_adr), pkt_size, PCI_DMA_FROMDEVICE);
++			consistent_sync((void *)__va(curr_desc->word2.buf_adr), pkt_size, PCI_DMA_FROMDEVICE);
+ 			skb = (struct sk_buff *)(REG32(__va(curr_desc->word2.buf_adr) - SKB_RESERVE_BYTES));
+ 			tp->curr_rx_skb = skb;
+-	//		curr_desc->word2.buf_adr = 0;
+ 
+-		    //skb_reserve (skb, SKB_RESERVE_BYTES);
+ 			skb_reserve (skb, RX_INSERT_BYTES);	/* 2 byte align the IP fields. */
+-			//if ((skb->tail+pkt_size) > skb->end )
+-			//printk("%s::------------->Here skb->len=%d,pkt_size= %d,skb->head=0x%x,skb->tail= 0x%x, skb->end= 0x%x\n", __func__, skb->len, pkt_size,skb->head,skb->tail,skb->end);
+ 			skb_put(skb, pkt_size);
+ 
+-
+ 			skb->dev = dev;
+ 			if (chksum_status == RX_CHKSUM_IP_UDP_TCP_OK)
+ 			{
+ 				skb->ip_summed = CHECKSUM_UNNECESSARY;
+-#ifdef CONFIG_SL351x_NAT
+-				if (nat_cfg.enabled && curr_desc->word3.bits.l3_offset && curr_desc->word3.bits.l4_offset)
+-				{
+-					struct iphdr	*ip_hdr;
+-					ip_hdr = (struct iphdr *)&(skb->data[curr_desc->word3.bits.l3_offset]);
+-					sl351x_nat_input(skb,
+-									tp->port_id,
+-									(void *)curr_desc->word3.bits.l3_offset,
+-								  	(void *)curr_desc->word3.bits.l4_offset);
+-				}
+-#endif
+ 				skb->protocol = eth_type_trans(skb,dev); /* set skb protocol */
+-#if 0
+-#ifdef CONFIG_SL351x_RXTOE
+-				if (storlink_ctl.rx_max_pktsize) {
+-					struct iphdr	*ip_hdr;
+-					struct tcphdr	*tcp_hdr;
+-					int ip_hdrlen;
+-
+- 					ip_hdr = (struct iphdr*)&(skb->data[0]);
+-					if ((skb->protocol == __constant_htons(ETH_P_IP)) &&
+-					   ((ip_hdr->protocol & 0x00ff) == IPPROTO_TCP)) {
+-						ip_hdrlen = ip_hdr->ihl << 2;
+-						tcp_hdr = (struct tcphdr*)&(skb->data[ip_hdrlen]);
+-						if (tcp_hdr->syn) {
+-							struct toe_conn* connection = init_toeq(ip_hdr->version,
+-									ip_hdr, tcp_hdr, toe, &(skb->data[0]) - 14);
+-							TCP_SKB_CB(skb)->connection = connection;
+-							//	hash_dump_entry(TCP_SKB_CB(skb)->connection->hash_entry_index);
+-							//		printk("%s::skb data %x, conn %x, mode %x\n",
+-							//			__func__, skb->data, connection, connection->mode);
+-						}
+-					}
+-				}
+-#endif
+-#endif
+ 			}
+ 			else if (chksum_status == RX_CHKSUM_IP_OK_ONLY)
+ 			{
+ 				skb->ip_summed = CHECKSUM_UNNECESSARY;
+-#ifdef CONFIG_SL351x_NAT
+-				if (nat_cfg.enabled && curr_desc->word3.bits.l3_offset && curr_desc->word3.bits.l4_offset)
+-				{
+-					struct iphdr	*ip_hdr;
+-					ip_hdr = (struct iphdr *)&(skb->data[curr_desc->word3.bits.l3_offset]);
+-					if (ip_hdr->protocol == IPPROTO_UDP)
+-					{
+-						sl351x_nat_input(skb,
+-										tp->port_id,
+-										(void *)curr_desc->word3.bits.l3_offset,
+-								  		(void *)curr_desc->word3.bits.l4_offset);
+-					}
+-					else if (ip_hdr->protocol == IPPROTO_GRE)
+-					{
+-						sl351x_nat_input(skb,
+-									tp->port_id,
+-									(void *)curr_desc->word3.bits.l3_offset,
+-								  	(void *)curr_desc->word3.bits.l4_offset);
+-					}
+-				}
+-#endif
+ 				skb->protocol = eth_type_trans(skb,dev); /* set skb protocol */
+ 			}
+ 			else
+ 			{
+ 				skb->protocol = eth_type_trans(skb,dev); /* set skb protocol */
+ 			}
+-			//netif_rx(skb);  /* socket rx */
++
+ 			netif_receive_skb(skb); //For NAPI
+ 			dev->last_rx = jiffies;
+ 
+ 			isPtr->rx_bytes += pkt_size;
+-			//printk("------------------->isPtr->rx_bytes = %d\n",isPtr->rx_bytes);
+-
++		}
+ 
+-        }
+ 		// advance one for Rx default Q 0/1
+ 		rwptr.bits.rptr = RWPTR_ADVANCE_ONE(rwptr.bits.rptr, tp->default_desc_num);
+ 		SET_RPTR(&tp->default_qhdr->word1, rwptr.bits.rptr);
+-     	tp->rx_rwptr.bits32 = rwptr.bits32;
++		tp->rx_rwptr.bits32 = rwptr.bits32;
+ 		rx_pkts_num++;
+-		//rwptr.bits32 = readl(&tp->default_qhdr->word1);//try read default_qhdr again
+-		//fq_rwptr.bits32 = readl(TOE_GLOBAL_BASE + GLOBAL_SWFQ_RWPTR_REG);
+-		//printk("%s:---Loop  -------->rx_pkts_num=%d------------>Default Queue HW RW ptr = (0x%8x),   fq_rwptr =0x%8x \n",__func__,rx_pkts_num,rwptr.bits32,fq_rwptr.bits32 );
+-#if 0
+-		if ((status4 & 0x1) == 0)
+-		{
+-			//if (!((dev->last_rx <= (rx_time + 2)) &&  (isPtr->rx_bytes > (rx_old_bytes + 1000000 ))))
+-			if (tp->total_q_cnt_napi < 1024)
+-			{
+-				tp->total_q_cnt_napi++;
+-				toe_gmac_fill_free_q();  //for iperf test disable
+-			}
+-			//else
+-				//printk("%s:---isPtr->rx_bytes =%u , rx_old_bytes =%u\n",__func__,isPtr->rx_bytes,rx_old_bytes );
++		// rwptr.bits32 = readl(&tp->default_qhdr->word1);
+ 
++		status4 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_STATUS_4_REG);
++		if (status4 & 1) {
++			writel(status4 & SWFQ_EMPTY_INT_BIT, TOE_GLOBAL_BASE+GLOBAL_INTERRUPT_STATUS_4_REG);
+ 		}
++
++		toe_gmac_fill_free_q(5);
++	}
++
++#if 0
++	/* avoid races with hard_start_xmit() */
++
++	spin_lock(&gmac_fq_lock);
++	toe_gmac_tx_complete(&toe_private_data.gmac[0], 0, dev, 1);
++	spin_unlock(&gmac_fq_lock);
+ #endif
+-		//rwptr.bits.rptr = RWPTR_ADVANCE_ONE(rwptr.bits.rptr, tp->default_desc_num);
+-		//printk("%s:---Loop  -------->rx_pkts_num=%d----rwptr.bits.rptr=0x%x-------->Default Queue HW RW ptr = (0x%8x),   fq_rwptr =0x%8x \n",__func__,rx_pkts_num,rwptr.bits.rptr,rwptr.bits32,fq_rwptr.bits32 );
+-		//printk("%s:---Loop  rx_pkts_num=%d------rwptr.bits.rptr=0x%x------->Default_Q [rwptr.bits.rptr(SW)=0x%x,   rwptr.bits.wptr(HW) = 0x%x ]---->Free_Q(SW_HW) = 0x%8x \n",__func__,rx_pkts_num,rwptr.bits.rptr,rwptr.bits.rptr,rwptr.bits.wptr,fq_rwptr.bits32 );
++
++	status4 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_STATUS_4_REG);
++	if (status4 & 1)
++	{
++		writel(status4 & SWFQ_EMPTY_INT_BIT, TOE_GLOBAL_BASE+GLOBAL_INTERRUPT_STATUS_4_REG);
++		status4 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_STATUS_4_REG);
++		toe_gmac_fill_free_q(rx_pkts_num);
+ 	}
+-	// advance one for Rx default Q 0/1
+ 
+-		//rwptr.bits.rptr = RWPTR_ADVANCE_ONE(rwptr.bits.rptr, tp->default_desc_num);
+-		//SET_RPTR(&tp->default_qhdr->word1, rwptr.bits.rptr);
+-     	//tp->rx_rwptr.bits32 = rwptr.bits32;
+-     	//rwptr.bits.rptr = rwptr.bits.rptr;
++	rwptr.bits32 = readl(&tp->default_qhdr->word1);
++	if (rwptr.bits.rptr != rwptr.bits.wptr &&
++	    quota > rx_pkts_num)
++		goto rx_poll_retry;
+ 
+ 	dev->quota -= rx_pkts_num;
+ 	*budget -= rx_pkts_num;
+ 
+-	status4 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_STATUS_4_REG);//try read SWFQ empty again
+-	//fq_rwptr.bits32 = readl(TOE_GLOBAL_BASE + GLOBAL_SWFQ_RWPTR_REG);
+-	rwptr.bits32 = readl(&tp->default_qhdr->word1); //try read default_qhdr again
+-	//printk("%s:---After    rx_pkts_num=%d------rwptr.bits.rptr=0x%x------->Default_Q [rwptr.bits.rptr(SW)=0x%x,   rwptr.bits.wptr(HW) = 0x%x ]---->Free_Q(SW_HW) = 0x%8x \n",__func__,rx_pkts_num,rwptr.bits.rptr,rwptr.bits.rptr,rwptr.bits.wptr,fq_rwptr.bits32 );
+-//	if (rwptr.bits.rptr > rwptr.bits.wptr )
+-//			{
+-				//toe_gmac_disable_rx(dev);
+-				//wait_event_interruptible_timeout(freeq_wait,
+-					//(rx_pkts_num == 100), CMTP_INTEROP_TIMEOUT);
+-				//printk("\n%s:: return 22222=======> rx_pkts_num =%d,   rwptr.bits.rptr=%d,   rwptr.bits.wptr = %d ====---------=======>JKJKJKJKJK\n",
+-					//__func__,rx_pkts_num,rwptr.bits.rptr,rwptr.bits.wptr);
+-//				return 1;
+-//			}
+-
+-	if (rwptr.bits.rptr == rwptr.bits.wptr)
++	/* Receive queue is empty now */
++	if (quota >= rx_pkts_num)
+ 	{
+-		// unsigned int data32;
+-			//printk("%s:---[rwptr.bits.rptr == rwptr.bits.wptr]   rx_pkts_num=%d------rwptr.bits.rptr=0x%x------->Default_Q [rwptr.bits.rptr(SW)=0x%x,   rwptr.bits.wptr(HW) = 0x%x ]---->Free_Q(SW_HW) = 0x%8x \n",__func__,rx_pkts_num,rwptr.bits.rptr,rwptr.bits.rptr,rwptr.bits.wptr,fq_rwptr.bits32 );
+-
+-	    /* Receive descriptor is empty now */
+-#if 1
+-     if (status4 & 0x1)
+-   			{
+-   				do_again =1;
+-   				//writel(0x40400000, TOE_GLOBAL_BASE+GLOBAL_INTERRUPT_ENABLE_4_REG); //disable SWFQ empty interrupt
+-   				//toe_gmac_disable_interrupt(tp->irq);
+-   				tp->sw_fq_empty_cnt++;
+-   				//toe_gmac_disable_rx(dev);
+-   				writel(0x07960202, TOE_GMAC0_BASE+GMAC_CONFIG0);
+-				writel(0x07960202, TOE_GMAC1_BASE+GMAC_CONFIG0);
+-   				//printk("\n%s ::  freeq int-----tp->sw_fq_empty_cnt  =%d---------====================----------------->\n",__func__,tp->sw_fq_empty_cnt);
+-   				//while ((fq_rwptr.bits.wptr >= (fq_rwptr.bits.rptr+256)) || (fq_rwptr.bits.wptr <= (fq_rwptr.bits.rptr+256)))
+-   				//{
+-   					//gmac_write_reg(TOE_GLOBAL_BASE, GLOBAL_INTERRUPT_STATUS_4_REG, status4,
+-					//0x1);
+-				//printk("\n%s::fq_rwptr.wrptr = %x =======> ===========>here \n", __func__,fq_rwptr.bits32);
+-				//if ((status4 & 0x1) == 0)
+-					//break;
+-				 return 1;
+-				//}
++		unsigned long flags;
+ 
++		netif_rx_complete(dev);
++		rx_poll_enabled = 0;
++#if 0
++		status1 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_STATUS_1_REG);
++		if (status1 & 1) {
++			if (netif_rx_reschedule(dev, rx_pkts_num)) {
++				rx_poll_enabled = 1;
++				return 1;
+ 			}
++		}
+ #endif
+-        //toe_gmac_fill_free_q();
+-        netif_rx_complete(dev);
+-
+-		rx_poll_enabled = 0;
+ 
+-		data32 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_1_REG);
+-		if (tp->port_id == 0)
+-				data32 |= DEFAULT_Q0_INT_BIT;
+-		else
+-				data32 |= DEFAULT_Q1_INT_BIT;
+-		writel(data32, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_1_REG);
++		spin_lock_irqsave(&gmac_fq_lock, flags);
+ 
+ 		data32 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_4_REG);
+ 		if (tp->port_id == 0)
+-				data32 |= DEFAULT_Q0_INT_BIT;
++			data32 |= DEFAULT_Q0_INT_BIT;
+ 		else
+-				data32 |= DEFAULT_Q1_INT_BIT;
++			data32 |= DEFAULT_Q1_INT_BIT;
+ 		writel(data32, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_4_REG);
+ 
+-		data32 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_4_REG);
++		data32 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_1_REG);
+ 		if (tp->port_id == 0)
+-				data32 |= DEFAULT_Q0_INT_BIT;
++			data32 |= DEFAULT_Q0_INT_BIT;
+ 		else
+-				data32 |= DEFAULT_Q1_INT_BIT;
+-		writel(data32, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_4_REG);
++			data32 |= DEFAULT_Q1_INT_BIT;
++		writel(data32, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_1_REG);
+ 
+-        // enable GMAC-0 rx interrupt
+-        // class-Q & TOE-Q are implemented in future
+-        //data32 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_1_REG);
+-        //if (tp->port_id == 0)
+-        	//data32 |= DEFAULT_Q0_INT_BIT;
+-        //else
+-        	//data32 |= DEFAULT_Q1_INT_BIT;
+-        //writel(data32, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_1_REG);
+-		writel(0x3, TOE_GLOBAL_BASE+GLOBAL_INTERRUPT_ENABLE_1_REG);
+-		//printk("\n%s::netif_rx_complete-->  rx_pkts_num =%d,   rwptr.bits.rptr=0x%x,   rwptr.bits.wptr = 0x%x ====---------=======>JKJKJKJKJK\n",
+-		//__func__,rx_pkts_num,rwptr.bits.rptr,rwptr.bits.wptr);
+-        writel(0x07960200, TOE_GMAC0_BASE+GMAC_CONFIG0);
+-		writel(0x07960200, TOE_GMAC1_BASE+GMAC_CONFIG0);
+-        return 0;
+-    }
+-    else
+-    {
+-        //printk("\n%s:: return 1 -->status4= 0x%x,rx_pkts_num =%d,   rwptr.bits.rptr=0x%x,   rwptr.bits.wptr = 0x%x  ======> \n", __func__,status4,rx_pkts_num,rwptr.bits.rptr,rwptr.bits.wptr);
+-        return 1;
+-    }
++		spin_unlock_irqrestore(&gmac_fq_lock, flags);
++
++		return 0;
++	}
++	else
++	{
++		/* not done, will call ->poll() later. */
++		return 1;
++	}
+ }
+ #endif
+ 
+@@ -5114,6 +4475,7 @@
+ 			{
+ 				sl351x_nat_workaround_cnt++;
+ 				sl351x_nat_workaround_handler();
++				printk("%():%d - workaround\n", __func__, __LINE__);
+ 			}
+ #endif
+ #endif
+@@ -5124,6 +4486,7 @@
+ 	}
+ 
+ do_workaround:
++	printk("doing workaround ?!\n");
+ 
+ 	gmac_initialized = 0;
+ 	if (hanged_state)
+@@ -5290,6 +4653,7 @@
+ 	GMAC_SWTXQ_T	*swtxq;
+ 	DMA_RWPTR_T		rwptr;
+ 
++	printk("**** %s():%d\n", __func__, __LINE__);
+ 	toe = (TOE_INFO_T *)&toe_private_data;
+ 	tp = (GMAC_INFO_T *)&toe->gmac[0];
+ 	for (i=0; igmac[0];
+ 	for (i=0; iclassq[0];
+ 	for (i=0; i
+ #include 
+ 
++//****** Storlink SoC ******
+ #define AMD_BOOTLOC_BUG
+-#define FORCE_WORD_WRITE 0
+-
+-#define MAX_WORD_RETRIES 3
++//#define FORCE_WORD_WRITE 0
++#define FORCE_WORD_WRITE 1
++#define FORCE_FAST_PROG 0
++
++//#define MAX_WORD_RETRIES 3
++#define MAX_WORD_RETRIES 3 // CONFIG_MTD_CFI_AMDSTD_RETRY
++//**************************
+ 
+ #define MANUFACTURER_AMD	0x0001
+ #define MANUFACTURER_ATMEL	0x001F
+@@ -322,6 +327,13 @@
+ #endif
+ 
+ 		bootloc = extp->TopBottom;
++//****** Storlink SoC ******
++		if(bootloc == 5)
++		{
++			bootloc = 3;
++			extp->TopBottom = 3;
++		}
++//**************************
+ 		if ((bootloc != 2) && (bootloc != 3)) {
+ 			printk(KERN_WARNING "%s: CFI does not contain boot "
+ 			       "bank location. Assuming top.\n", map->name);
+@@ -340,6 +352,9 @@
+ 				cfi->cfiq->EraseRegionInfo[j] = swap;
+ 			}
+ 		}
++#ifdef CONFIG_MTD_MAP_BANK_WIDTH_1
++		cfi->device_type = CFI_DEVICETYPE_X8;
++#endif
+ 		/* Set the default CFI lock/unlock addresses */
+ 		cfi->addr_unlock1 = 0x555;
+ 		cfi->addr_unlock2 = 0x2aa;
+@@ -461,6 +476,7 @@
+ 	map_word d, t;
+ 
+ 	d = map_read(map, addr);
++	udelay(20);	//Storlink SoC
+ 	t = map_read(map, addr);
+ 
+ 	return map_word_equal(map, d, t);
+@@ -626,7 +642,9 @@
+ 	default:
+ 		printk(KERN_ERR "MTD: put_chip() called with oldstate %d!!\n", chip->oldstate);
+ 	}
++//****** Storlink SoC ******
+ 	wake_up(&chip->wq);
++//**************************
+ }
+ 
+ #ifdef CONFIG_MTD_XIP
+@@ -940,7 +958,9 @@
+ 	cfi_send_gen_cmd(0x90, cfi->addr_unlock1, chip->start, map, cfi, cfi->device_type, NULL);
+ 	cfi_send_gen_cmd(0x00, cfi->addr_unlock1, chip->start, map, cfi, cfi->device_type, NULL);
+ 
++//****** Storlink SoC ******
+ 	wake_up(&chip->wq);
++//**************************
+ 	spin_unlock(chip->mutex);
+ 
+ 	return 0;
+@@ -1005,7 +1025,10 @@
+ 	 */
+ 	unsigned long uWriteTimeout = ( HZ / 1000 ) + 1;
+ 	int ret = 0;
+-	map_word oldd;
++//****** Storlink SoC ******
++//	map_word oldd;
++	map_word oldd, tmp;
++//**************************
+ 	int retry_cnt = 0;
+ 
+ 	adr += chip->start;
+@@ -1037,9 +1060,15 @@
+ 	ENABLE_VPP(map);
+ 	xip_disable(map, chip, adr);
+  retry:
++//****** Storlink SoC ******
++#if FORCE_FAST_PROG  /* Unlock bypass */
++	cfi_send_gen_cmd(0xA0, cfi->addr_unlock1, chip->start, map, cfi, cfi->device_type, NULL);
++#else
+ 	cfi_send_gen_cmd(0xAA, cfi->addr_unlock1, chip->start, map, cfi, cfi->device_type, NULL);
+ 	cfi_send_gen_cmd(0x55, cfi->addr_unlock2, chip->start, map, cfi, cfi->device_type, NULL);
+ 	cfi_send_gen_cmd(0xA0, cfi->addr_unlock1, chip->start, map, cfi, cfi->device_type, NULL);
++#endif
++//**************************
+ 	map_write(map, datum, adr);
+ 	chip->state = FL_WRITING;
+ 
+@@ -1072,7 +1101,13 @@
+ 		}
+ 
+ 		if (chip_ready(map, adr))
+-			break;
++		{
++			tmp = map_read(map, adr);
++			if(map_word_equal(map, tmp, datum))
++//				goto op_done;
++                break;
++
++		}
+ 
+ 		/* Latency issues. Drop the lock, wait a while and retry */
+ 		UDELAY(map, chip, adr, 1);
+@@ -1084,8 +1119,17 @@
+ 		/* FIXME - should have reset delay before continuing */
+ 
+ 		if (++retry_cnt <= MAX_WORD_RETRIES)
++		{
++//****** Storlink SoC ******
++#if FORCE_FAST_PROG
++			cfi_send_gen_cmd(0xAA, cfi->addr_unlock1, chip->start, map, cfi, cfi->device_type, NULL);
++			cfi_send_gen_cmd(0x55, cfi->addr_unlock2, chip->start, map, cfi, cfi->device_type, NULL);
++			cfi_send_gen_cmd(0x20, cfi->addr_unlock1, chip->start, map, cfi, cfi->device_type, NULL);
++		//udelay(1);
++#endif
++			udelay(1);
+ 			goto retry;
+-
++		}
+ 		ret = -EIO;
+ 	}
+ 	xip_enable(map, chip, adr);
+@@ -1171,7 +1215,14 @@
+ 				return 0;
+ 		}
+ 	}
+-
++//****** Storlink SoC ******
++	map_write( map, CMD(0xF0), chipstart );
++#if FORCE_FAST_PROG
++		cfi_send_gen_cmd(0xAA, cfi->addr_unlock1, chipstart, map, cfi, cfi->device_type, NULL);
++		cfi_send_gen_cmd(0x55, cfi->addr_unlock2, chipstart, map, cfi, cfi->device_type, NULL);
++		cfi_send_gen_cmd(0x20, cfi->addr_unlock1, chipstart, map, cfi, cfi->device_type, NULL);
++#endif
++//**************************
+ 	/* We are now aligned, write as much as possible */
+ 	while(len >= map_bankwidth(map)) {
+ 		map_word datum;
+@@ -1181,7 +1232,15 @@
+ 		ret = do_write_oneword(map, &cfi->chips[chipnum],
+ 				       ofs, datum);
+ 		if (ret)
++		{
++//****** Storlink SoC ******
++#if FORCE_FAST_PROG
++			/* Get out of unlock bypass mode */
++			cfi_send_gen_cmd(0x90, 0, chipstart, map, cfi, cfi->device_type, NULL);
++			cfi_send_gen_cmd(0x00, 0, chipstart, map, cfi, cfi->device_type, NULL);
++#endif
+ 			return ret;
++		}
+ 
+ 		ofs += map_bankwidth(map);
+ 		buf += map_bankwidth(map);
+@@ -1189,19 +1248,38 @@
+ 		len -= map_bankwidth(map);
+ 
+ 		if (ofs >> cfi->chipshift) {
++//****** Storlink SoC ******
++#if FORCE_FAST_PROG
++			/* Get out of unlock bypass mode */
++			cfi_send_gen_cmd(0x90, 0, chipstart, map, cfi, cfi->device_type, NULL);
++			cfi_send_gen_cmd(0x00, 0, chipstart, map, cfi, cfi->device_type, NULL);
++#endif
+ 			chipnum ++;
+ 			ofs = 0;
+ 			if (chipnum == cfi->numchips)
+ 				return 0;
+ 			chipstart = cfi->chips[chipnum].start;
++#if FORCE_FAST_PROG
++			/* Go into unlock bypass mode for next set of chips */
++			cfi_send_gen_cmd(0xAA, cfi->addr_unlock1, chipstart, map, cfi, cfi->device_type, NULL);
++			cfi_send_gen_cmd(0x55, cfi->addr_unlock2, chipstart, map, cfi, cfi->device_type, NULL);
++			cfi_send_gen_cmd(0x20, cfi->addr_unlock1, chipstart, map, cfi, cfi->device_type, NULL);
++#endif
+ 		}
+ 	}
+ 
++#if FORCE_FAST_PROG
++	/* Get out of unlock bypass mode */
++	cfi_send_gen_cmd(0x90, 0, chipstart, map, cfi, cfi->device_type, NULL);
++	cfi_send_gen_cmd(0x00, 0, chipstart, map, cfi, cfi->device_type, NULL);
++#endif
++
+ 	/* Write the trailing bytes if any */
+ 	if (len & (map_bankwidth(map)-1)) {
+ 		map_word tmp_buf;
+ 
+  retry1:
++
+ 		spin_lock(cfi->chips[chipnum].mutex);
+ 
+ 		if (cfi->chips[chipnum].state != FL_READY) {
+@@ -1221,7 +1299,11 @@
+ #endif
+ 			goto retry1;
+ 		}
+-
++#if FORCE_FAST_PROG
++		cfi_send_gen_cmd(0xAA, cfi->addr_unlock1, chipstart, map, cfi, cfi->device_type, NULL);
++		cfi_send_gen_cmd(0x55, cfi->addr_unlock2, chipstart, map, cfi, cfi->device_type, NULL);
++		cfi_send_gen_cmd(0x20, cfi->addr_unlock1, chipstart, map, cfi, cfi->device_type, NULL);
++#endif
+ 		tmp_buf = map_read(map, ofs + chipstart);
+ 
+ 		spin_unlock(cfi->chips[chipnum].mutex);
+@@ -1231,11 +1313,23 @@
+ 		ret = do_write_oneword(map, &cfi->chips[chipnum],
+ 				ofs, tmp_buf);
+ 		if (ret)
++		{
++#if FORCE_FAST_PROG
++	/* Get out of unlock bypass mode */
++	cfi_send_gen_cmd(0x90, 0, chipstart, map, cfi, cfi->device_type, NULL);
++	cfi_send_gen_cmd(0x00, 0, chipstart, map, cfi, cfi->device_type, NULL);
++#endif
+ 			return ret;
+-
++		}
++#if FORCE_FAST_PROG
++	/* Get out of unlock bypass mode */
++	cfi_send_gen_cmd(0x90, 0, chipstart, map, cfi, cfi->device_type, NULL);
++	cfi_send_gen_cmd(0x00, 0, chipstart, map, cfi, cfi->device_type, NULL);
++#endif
+ 		(*retlen) += len;
+ 	}
+ 
++	map_write( map, CMD(0xF0), chipstart );
+ 	return 0;
+ }
+ 
+@@ -1275,6 +1369,7 @@
+ 	ENABLE_VPP(map);
+ 	xip_disable(map, chip, cmd_adr);
+ 
++	map_write( map, CMD(0xF0), chip->start );	//Storlink
+ 	cfi_send_gen_cmd(0xAA, cfi->addr_unlock1, chip->start, map, cfi, cfi->device_type, NULL);
+ 	cfi_send_gen_cmd(0x55, cfi->addr_unlock2, chip->start, map, cfi, cfi->device_type, NULL);
+ 	//cfi_send_gen_cmd(0xA0, cfi->addr_unlock1, chip->start, map, cfi, cfi->device_type, NULL);
+@@ -1535,6 +1630,9 @@
+ 	DECLARE_WAITQUEUE(wait, current);
+ 	int ret = 0;
+ 
++#ifdef CONFIG_SL2312_SHARE_PIN
++	mtd_lock();				// sl2312 share pin lock
++#endif
+ 	adr += chip->start;
+ 
+ 	spin_lock(chip->mutex);
+@@ -1613,6 +1711,9 @@
+ 	chip->state = FL_READY;
+ 	put_chip(map, chip, adr);
+ 	spin_unlock(chip->mutex);
++#ifdef CONFIG_SL2312_SHARE_PIN
++	mtd_unlock();				// sl2312 share pin lock
++#endif
+ 	return ret;
+ }
+ 
+--- /dev/null
++++ b/drivers/mtd/chips/map_serial.c
+@@ -0,0 +1,188 @@
++/*
++ * Common code to handle map devices which are simple ROM
++ * (C) 2000 Red Hat. GPL'd.
++ * $Id: map_serial.c,v 1.3 2006/06/05 02:34:54 middle Exp $
++ */
++
++#include 
++#include 
++#include 
++#include 
++#include 
++
++#include 
++#include 
++#include 
++
++#include 
++#include 
++#include 
++#include  //add
++#include 
++#include 
++
++static int mapserial_erase(struct mtd_info *mtd, struct erase_info *instr);
++static int mapserial_read (struct mtd_info *, loff_t, size_t, size_t *, u_char *);
++static int mapserial_write (struct mtd_info *, loff_t, size_t, size_t *, const u_char *);
++static void mapserial_nop (struct mtd_info *);
++struct mtd_info *map_serial_probe(struct map_info *map);
++
++extern int m25p80_sector_erase(__u32 address, __u32 schip_en);
++
++static struct mtd_chip_driver mapserial_chipdrv = {
++	probe: map_serial_probe,
++	name: "map_serial",
++	module: THIS_MODULE
++};
++
++struct mtd_info *map_serial_probe(struct map_info *map)
++{
++	struct mtd_info *mtd;
++
++	mtd = kmalloc(sizeof(*mtd), GFP_KERNEL);
++	if (!mtd)
++		return NULL;
++
++	memset(mtd, 0, sizeof(*mtd));
++
++	map->fldrv = &mapserial_chipdrv;
++	mtd->priv = map;
++	mtd->name = map->name;
++	mtd->type = MTD_OTHER;
++	mtd->erase = mapserial_erase;
++	mtd->size = map->size;
++	mtd->read = mapserial_read;
++	mtd->write = mapserial_write;
++	mtd->sync = mapserial_nop;
++	mtd->flags = (MTD_WRITEABLE|MTD_ERASEABLE);
++//	mtd->erasesize = 512; // page size;
++#ifdef CONFIG_MTD_SL2312_SERIAL_ST
++	mtd->erasesize = M25P80_SECTOR_SIZE; // block size;
++#else
++	mtd->erasesize = 0x1000; // block size;
++#endif
++
++	__module_get(THIS_MODULE);
++	//MOD_INC_USE_COUNT;
++	return mtd;
++}
++
++#define	FLASH_ACCESS_OFFSET	        		0x00000010
++#define	FLASH_ADDRESS_OFFSET            		0x00000014
++#define	FLASH_WRITE_DATA_OFFSET         		0x00000018
++#define	FLASH_READ_DATA_OFFSET          		0x00000018
++
++static __u32 readflash_ctrl_reg(__u32 ofs)
++{
++    __u32 *base;
++
++    base = (__u32 *)IO_ADDRESS((SL2312_FLASH_CTRL_BASE + ofs));
++    return __raw_readl(base);
++}
++
++static void writeflash_ctrl_reg(__u32 data, __u32 ofs)
++{
++    __u32 *base;
++
++    base = (__u32 *)IO_ADDRESS((SL2312_FLASH_CTRL_BASE + ofs));
++    __raw_writel(data, base);
++}
++
++static int mapserial_erase_block(struct map_info *map,unsigned int block)
++{
++
++	__u32 address;
++#ifdef CONFIG_MTD_SL2312_SERIAL_ST
++
++	if(!m25p80_sector_erase(block, 0))
++		return (MTD_ERASE_DONE);
++#else
++      __u32 opcode;
++      __u32 count=0;
++//      __u8  status;
++
++ //     printk("mapserial_erase_block : erase block %d \n",block);
++//      opcode = 0x80000000 | FLASH_ACCESS_ACTION_SHIFT_ADDRESS | cmd;
++      opcode = 0x80000000 | 0x0200 | 0x50;
++      address = (block << 13);
++      writeflash_ctrl_reg(address,FLASH_ADDRESS_OFFSET);
++      writeflash_ctrl_reg(opcode,FLASH_ACCESS_OFFSET);
++      opcode=readflash_ctrl_reg(FLASH_ACCESS_OFFSET);
++      while(opcode&0x80000000)
++      {
++          opcode = readflash_ctrl_reg(FLASH_ACCESS_OFFSET);
++          count++;
++          if (count > 10000)
++          {
++            return (MTD_ERASE_FAILED);
++          }
++      }
++      return (MTD_ERASE_DONE);
++#endif
++}
++
++static int mapserial_erase(struct mtd_info *mtd, struct erase_info *instr)
++{
++	struct map_info *map = (struct map_info *)mtd->priv;
++    unsigned int    addr;
++    int             len;
++    unsigned int    block;
++    unsigned int    ret=0;
++
++	addr = instr->addr;
++	len = instr->len;
++    while (len > 0)
++    {
++        block = addr / mtd->erasesize;
++#ifdef CONFIG_MTD_SL2312_SERIAL_ST
++        ret = mapserial_erase_block(map,addr);
++#else
++		ret = mapserial_erase_block(map,block);
++#endif
++        addr = addr + mtd->erasesize;
++        len = len - mtd->erasesize;
++    }
++    return (ret);
++}
++
++static int mapserial_read (struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, u_char *buf)
++{
++	struct map_info *map = (struct map_info *)mtd->priv;
++//        printk("mapserial_read : \n");
++	map->copy_from(map, buf, from, len);
++	*retlen = len;
++	return 0;
++}
++
++static void mapserial_nop(struct mtd_info *mtd)
++{
++	/* Nothing to see here */
++}
++
++static int mapserial_write (struct mtd_info *mtd, loff_t to, size_t len, size_t *retlen, const u_char *buf)
++{
++	struct map_info *map = (struct map_info *)mtd->priv;
++//	printk("mapserial_write : buf %x to %x len %x \n",(int)buf, (int)to, (int)len);
++	//map->copy_to(map, buf, to, len);
++	map->copy_to(map, to, buf, len);
++	*retlen = len;
++	return 0;
++}
++
++int __init map_serial_init(void)
++{
++	register_mtd_chip_driver(&mapserial_chipdrv);
++	return 0;
++}
++
++static void __exit map_serial_exit(void)
++{
++	unregister_mtd_chip_driver(&mapserial_chipdrv);
++}
++
++module_init(map_serial_init);
++module_exit(map_serial_exit);
++
++MODULE_LICENSE("GPL");
++MODULE_AUTHOR("David Woodhouse ");
++MODULE_DESCRIPTION("MTD chip driver for ROM chips");
+--- a/drivers/mtd/maps/Kconfig
++++ b/drivers/mtd/maps/Kconfig
+@@ -614,5 +614,30 @@
+ 
+ 	  This selection automatically selects the map_ram driver.
+ 
++#***************************************************************************************
++# Storlink parallel/Serial Flash configuration
++#***************************************************************************************
++config MTD_SL2312_CFI
++        tristate "CFI Flash device mapped on SL2312"
++        depends on MTD_CFI
++        help
++          Map driver for SL2312 demo board.
++
++config MTD_SL2312_SERIAL_ATMEL
++        tristate "ATMEL Serial Flash device mapped on SL2312"
++        depends on MTD_PARTITIONS && ARCH_SL2312
++        help
++          Map driver for SL2312 demo board.
++
++config MTD_SL2312_SERIAL_ST
++        tristate "ST Serial Flash device mapped on SL2312"
++        depends on MTD_PARTITIONS && ARCH_SL2312
++        help
++          Map driver for SL2312 demo board.
++
++config SL2312_SHARE_PIN
++        tristate "Parallel Flash share pin on SL2312 ASIC"
++        depends on SL3516_ASIC
++
+ endmenu
+ 
+--- /dev/null
++++ b/drivers/mtd/maps/sl2312-flash-atmel.c
+@@ -0,0 +1,554 @@
++/*
++ * $Id: sl2312-flash-atmel.c,v 1.2 2006/06/05 02:35:57 middle Exp $
++ *
++ * Flash and EPROM on Hitachi Solution Engine and similar boards.
++ *
++ * (C) 2001 Red Hat, Inc.
++ *
++ * GPL'd
++ */
++
++#include 
++#include 
++#include 
++
++#include 
++#include 
++#include 
++#include 
++#include 
++
++#include 
++#include 
++#include  //add
++
++
++#define  g_page_addr  AT45DB321_PAGE_SHIFT    //321 : shift 10  ; 642 : shift 11
++#define  g_chipen     SERIAL_FLASH_CHIP0_EN   //atmel
++
++extern int parse_redboot_partitions(struct mtd_info *master, struct mtd_partition **pparts);
++
++void address_to_page(__u32 address, __u16 *page, __u16 *offset)
++{
++    *page = address / SPAGE_SIZE;
++    *offset = address % SPAGE_SIZE;
++}
++
++static __u32 read_flash_ctrl_reg(__u32 ofs)
++{
++    __u32 *base;
++
++    base = (__u32 *)IO_ADDRESS((SL2312_FLASH_CTRL_BASE + ofs));
++    return __raw_readl(base);
++}
++
++static void write_flash_ctrl_reg(__u32 ofs,__u32 data)
++{
++    __u32 *base;
++
++    base = (__u32 *)IO_ADDRESS((SL2312_FLASH_CTRL_BASE + ofs));
++    __raw_writel(data, base);
++}
++
++void atmel_read_status(__u8 cmd, __u8 *data)
++{
++      __u32 opcode;
++      __u32 value;
++
++      opcode = 0x80000000 | FLASH_ACCESS_ACTION_OPCODE_DATA | cmd | g_chipen;
++      write_flash_ctrl_reg(FLASH_ACCESS_OFFSET, opcode);
++      opcode=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET);
++      while(opcode&0x80000000)
++      {
++          opcode=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET);
++          flash_delay();
++          schedule();
++      }
++
++      value=read_flash_ctrl_reg(FLASH_READ_DATA_OFFSET);
++      *data = value & 0xff;
++}
++
++void main_memory_page_read(__u8 cmd, __u16 page, __u16 offset, __u8 *data)
++{
++      __u32 opcode;
++      __u32 address;
++      __u32 value;
++
++      opcode = 0x80000000 | FLASH_ACCESS_ACTION_SHIFT_ADDRESS_4X_DATA | cmd | g_chipen;
++      address = (page << g_page_addr) + offset;
++      write_flash_ctrl_reg(FLASH_ADDRESS_OFFSET, address);
++      write_flash_ctrl_reg(FLASH_ACCESS_OFFSET, opcode);
++      opcode=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET);
++      while(opcode&0x80000000)
++      {
++          opcode=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET);
++          flash_delay();
++          schedule();
++      }
++
++      value=read_flash_ctrl_reg(FLASH_READ_DATA_OFFSET);
++      *data = value & 0xff;
++}
++
++void buffer_to_main_memory(__u8 cmd, __u16 page)
++{
++      __u32 opcode;
++      __u32 address;
++      __u8  status;
++
++      opcode = 0x80000000 | FLASH_ACCESS_ACTION_SHIFT_ADDRESS | cmd | g_chipen;
++      address = (page << g_page_addr);
++      write_flash_ctrl_reg(FLASH_ADDRESS_OFFSET, address);
++      write_flash_ctrl_reg(FLASH_ACCESS_OFFSET, opcode);
++      opcode=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET);
++      while(opcode&0x80000000)
++      {
++          opcode=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET);
++          flash_delay();
++          schedule();
++      }
++      atmel_read_status(READ_STATUS_SPI, &status);
++      while(!(status&0x80))
++      {
++          atmel_read_status(READ_STATUS_SPI, &status);
++          flash_delay();
++          schedule();
++      }
++
++}
++
++
++void atmel_flash_read_page(__u32 address, __u8 *buffer, __u32 len)
++{
++    __u8  byte;
++    __u16 page, offset;
++    __u16 i;
++
++    address_to_page(address, &page, &offset);
++
++     for(i=0; i> 8;
++//printk("sl2312_write32:: address = %08x  data = %c \n",ofs,byte);
++    }
++#else
++      write_flash_ctrl_reg(ofs, d);
++#endif
++}
++
++void sl2312_write8(struct map_info *map, __u8 d, unsigned long ofs)
++{
++     __u16 page, offset;
++
++     address_to_page(ofs, &page, &offset);
++     main_memory_page_program(MAIN_MEMORY_PROGRAM_BUFFER1, page, offset, d);
++//printk("sl2312_write8:: address = %08x  data = %c \n",ofs,d);
++
++}
++
++void sl2312_copy_from(struct map_info *map, void *buf, unsigned long ofs, ssize_t len)
++{
++     __u32 size;
++     __u8  *buffer;
++     __u32 length;//i, j,
++
++     //printk("sl2312_copy_from:: address = %08x  datalen = %d \n",ofs,len);
++
++     length = len;
++     buffer = (__u8 *)buf;
++     while(len)
++     {
++        size = SPAGE_SIZE - (ofs%SPAGE_SIZE);
++        if(size > len)
++            size = len;
++        atmel_flash_read_page(ofs, buffer, size);
++        buffer+=size;
++        ofs+=size;
++        len -= size;
++     }
++
++#if 0
++        buffer = (__u8 *)buf;
++        for(i=0; i len)
++            size = len;
++        atmel_flash_program_page(ofs, buffer, size);
++        buffer+=size;
++        ofs+=size;
++	len-=size;
++    }
++
++
++}
++
++
++static struct mtd_info *serial_mtd;
++
++static struct mtd_partition *parsed_parts;
++
++static struct map_info sl2312_serial_map = {
++//	name: "SL2312 serial flash",
++//	size: 4194304, //0x400000,
++//		//buswidth: 4,
++//	bankwidth: 4,
++//	phys:		 SL2312_FLASH_BASE,
++//#ifdef CONFIG_MTD_COMPLEX_MAPPINGS
++//	//read32: sl2312_read32,
++//	//read8: sl2312_read8,
++//	copy_from: sl2312_copy_from,
++//	//write8: sl2312_write8,
++//	//write32: sl2312_write32,
++//	read: sl2312_read32,
++//	write: sl2312_write32,
++//	copy_to: sl2312_copy_to
++//#endif
++	.name = "SL2312 serial flash",
++	.size = 4194304, //0x400000,
++		//buswidth: 4,
++	.bankwidth = 4,
++	.phys =		 SL2312_FLASH_BASE,
++#ifdef CONFIG_MTD_COMPLEX_MAPPINGS
++	//read32: sl2312_read32,
++	//read8: sl2312_read8,
++	.copy_from = sl2312_copy_from,
++	//write8: sl2312_write8,
++	//write32: sl2312_write32,
++	.read = sl2312_read32,
++	.write = sl2312_write32,
++	.copy_to = sl2312_copy_to
++#endif
++};
++
++
++
++static struct mtd_partition sl2312_partitions[] = {
++
++
++	///* boot code */
++	//{ name: "bootloader", offset: 0x00000000, size: 0x20000, },
++	///* kernel image */
++	//{ name: "kerel image", offset: 0x000020000, size: 0x2E0000 },
++	///* All else is writable (e.g. JFFS) */
++	//{ name: "user data", offset: 0x00300000, size: 0x00100000, },
++	/* boot code */
++	{ .name = "bootloader", .offset = 0x00000000, .size = 0x20000, },
++	/* kernel image */
++	{ .name = "kerel image", .offset = 0x000020000, .size = 0xE0000 },
++	/* All else is writable (e.g. JFFS) */
++	{ .name = "user data", .offset = 0x00100000, .size = 0x00300000, },
++
++
++};
++
++
++
++static int __init init_sl2312_maps(void)
++{
++	int nr_parts = 0;
++	struct mtd_partition *parts;
++
++	serial_mtd = kmalloc(sizeof(struct mtd_info), GFP_KERNEL);
++	if (!serial_mtd)
++		return NULL;
++
++	memset(serial_mtd, 0, sizeof(struct mtd_info));
++	//sl2312flash_map.virt = (unsigned long)ioremap(SL2312_FLASH_BASE, FLASH_SIZE);
++    //sl2312_serial_map.map_priv_1 = (unsigned long)ioremap(SL2312_FLASH_BASE, SFLASH_SIZE);//(unsigned long)FLASH_VBASE;
++    sl2312_serial_map.virt = (unsigned long)ioremap(SL2312_FLASH_BASE, SFLASH_SIZE);//(unsigned long)ioremap(FLASH_START, SFLASH_SIZE);
++    if (!sl2312_serial_map.virt) {
++		printk(" failed to ioremap \n");
++		return -EIO;
++	}
++	serial_mtd = do_map_probe("map_serial", &sl2312_serial_map);
++	if (serial_mtd) {
++		//serial_mtd->module = THIS_MODULE;
++		serial_mtd->owner = THIS_MODULE;
++
++	}
++
++#ifdef CONFIG_MTD_REDBOOT_PARTS
++	nr_parts = parse_redboot_partitions(serial_mtd, &parsed_parts);
++	if (nr_parts > 0)
++		printk(KERN_NOTICE "Found RedBoot partition table.\n");
++	else if (nr_parts < 0)
++		printk(KERN_NOTICE "Error looking for RedBoot partitions.\n");
++#else
++	parsed_parts = sl2312_partitions;
++	parts = sl2312_partitions;
++	nr_parts = sizeof(sl2312_partitions)/sizeof(*parts);
++	nr_parts = sizeof(sl2312_partitions)/sizeof(*parsed_parts);
++#endif /* CONFIG_MTD_REDBOOT_PARTS */
++
++	if (nr_parts > 0)
++	    add_mtd_partitions(serial_mtd, parsed_parts, nr_parts);
++	else
++	    add_mtd_device(serial_mtd);
++
++	return 0;
++}
++
++static void __exit cleanup_sl2312_maps(void)
++{
++	if (parsed_parts)
++	    del_mtd_partitions(serial_mtd);
++	else
++	    del_mtd_device(serial_mtd);
++
++	map_destroy(serial_mtd);
++
++
++}
++
++module_init(init_sl2312_maps);
++module_exit(cleanup_sl2312_maps);
++
++
++
++MODULE_LICENSE("GPL");
++MODULE_AUTHOR("Plus Chen ");
++MODULE_DESCRIPTION("MTD map driver for Storlink Sword boards");
++
+--- /dev/null
++++ b/drivers/mtd/maps/sl2312-flash-cfi.c
+@@ -0,0 +1,370 @@
++/*======================================================================
++
++   This program is free software; you can redistribute it and/or modify
++   it under the terms of the GNU General Public License as published by
++   the Free Software Foundation; either version 2 of the License, or
++   (at your option) any later version.
++
++   This program is distributed in the hope that it will be useful,
++   but WITHOUT ANY WARRANTY; without even the implied warranty of
++   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++   GNU General Public License for more details.
++
++   You should have received a copy of the GNU General Public License
++   along with this program; if not, write to the Free Software
++   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
++======================================================================*/
++
++#include 
++#include 
++#include 
++#include 
++#include 
++#include 
++#include 
++
++#include 
++#include 
++#include 
++
++#include 
++#include 
++#include 
++#include 
++#include 
++#include "sl2312_flashmap.h"
++
++
++//extern int parse_afs_partitions(struct mtd_info *, struct mtd_partition **);
++
++/* the base address of FLASH control register */
++#define FLASH_CONTROL_BASE_ADDR	    (IO_ADDRESS(SL2312_FLASH_CTRL_BASE))
++#define SL2312_GLOBAL_BASE_ADDR     (IO_ADDRESS(SL2312_GLOBAL_BASE))
++
++/* define read/write register utility */
++#define FLASH_READ_REG(offset)			(__raw_readl(offset+FLASH_CONTROL_BASE_ADDR))
++#define FLASH_WRITE_REG(offset,val) 	(__raw_writel(val,offset+FLASH_CONTROL_BASE_ADDR))
++
++/* the offset of FLASH control register */
++enum EMAC_REGISTER {
++	FLASH_ID     	= 0x0000,
++	FLASH_STATUS 	= 0x0008,
++	FLASH_TYPE   	= 0x000c,
++	FLASH_ACCESS	= 0x0020,
++	FLASH_ADDRESS   = 0x0024,
++	FLASH_DATA		= 0x0028,
++	FLASH_TIMING    = 0x002c,
++};
++
++//#define FLASH_BASE	FLASH_CONTROL_BASE_ADDR
++//#define FLASH_SIZE	0x00800000 //INTEGRATOR_FLASH_SIZE
++
++//#define FLASH_PART_SIZE 8388608
++
++static unsigned int flash_indirect_access = 0;
++
++#ifdef CONFIG_SL2312_SHARE_PIN
++static unsigned int chip_en = 0x00000000;
++
++void sl2312flash_enable_parallel_flash(void)
++{
++    unsigned int    reg_val;
++
++    reg_val = readl(SL2312_GLOBAL_BASE_ADDR + 0x30);
++    reg_val = reg_val & 0xfffffffd;
++    writel(reg_val,SL2312_GLOBAL_BASE_ADDR + 0x30);
++    return;
++}
++
++void sl2312flash_disable_parallel_flash(void)
++{
++    unsigned int    reg_val;
++
++    reg_val = readl(SL2312_GLOBAL_BASE_ADDR + 0x30);
++    reg_val = reg_val | 0x00000002;
++    writel(reg_val,SL2312_GLOBAL_BASE_ADDR + 0x30);
++    return;
++}
++#endif
++
++
++static struct map_info sl2312flash_map =
++{
++	name:		"SL2312 CFI Flash",
++	size:       FLASH_SIZE,
++	bankwidth:   2,
++	//bankwidth:   1, //for 8 bits width
++    phys:       SL2312_FLASH_BASE,
++};
++
++static struct mtd_info *mtd;
++#if 0
++static struct mtd_partition sl2312_partitions[] = {
++	/* boot code */
++	{
++		name: "bootloader",
++		offset: 0x00000000,
++		size: 0x20000,
++//		mask_flags: MTD_WRITEABLE,
++	},
++	/* kernel image */
++	{
++		name: "kerel image",
++		offset: 0x00020000,
++		size: 0x2E0000
++	},
++	/* All else is writable (e.g. JFFS) */
++	{
++		name: "user data",
++		offset: 0x00300000,
++		size: 0x00100000,
++	}
++};
++#endif
++
++
++
++static int __init sl2312flash_init(void)
++{
++	struct mtd_partition *parts;
++	int nr_parts = 0;
++	int ret;
++#ifndef CONFIG_SL2312_SHARE_PIN
++    unsigned int    reg_val;
++#endif
++
++    printk("SL2312 MTD Driver Init.......\n");
++
++#ifndef CONFIG_SL2312_SHARE_PIN
++	/* enable flash */
++    reg_val = readl(SL2312_GLOBAL_BASE_ADDR + 0x30);
++    reg_val = reg_val & 0xfffffffd;
++    writel(reg_val,SL2312_GLOBAL_BASE_ADDR + 0x30);
++#else
++    sl2312flash_enable_parallel_flash();      /* enable Parallel FLASH */
++#endif
++    FLASH_WRITE_REG(FLASH_ACCESS,0x00004000); /* parallel flash direct access mode */
++    ret = FLASH_READ_REG(FLASH_ACCESS);
++    if (ret == 0x00004000)
++    {
++        flash_indirect_access = 0;  /* parallel flash direct access */
++    }
++    else
++    {
++        flash_indirect_access = 1;  /* parallel flash indirect access */
++    }
++
++	/*
++	 * Also, the CFI layer automatically works out what size
++	 * of chips we have, and does the necessary identification
++	 * for us automatically.
++	 */
++#ifdef CONFIG_GEMINI_IPI
++	sl2312flash_map.virt = FLASH_VBASE;//(unsigned int *)ioremap(SL2312_FLASH_BASE, FLASH_SIZE);
++#else
++	sl2312flash_map.virt = (unsigned int *)ioremap(SL2312_FLASH_BASE, FLASH_SIZE);
++#endif
++	//printk("sl2312flash_map.virt  = %08x\n",(unsigned int)sl2312flash_map.virt);
++
++//	simple_map_init(&sl2312flash_map);
++
++	mtd = do_map_probe("cfi_probe", &sl2312flash_map);
++	if (!mtd)
++	{
++#ifdef CONFIG_SL2312_SHARE_PIN
++        sl2312flash_disable_parallel_flash();      /* disable Parallel FLASH */
++#endif
++		return -ENXIO;
++	}
++	mtd->owner = THIS_MODULE;
++//    mtd->erase = flash_erase;
++//    mtd->read = flash_read;
++//    mtd->write = flash_write;
++
++    parts = sl2312_partitions;
++	nr_parts = sizeof(sl2312_partitions)/sizeof(*parts);
++	ret = add_mtd_partitions(mtd, parts, nr_parts);
++	/*If we got an error, free all resources.*/
++	if (ret < 0) {
++		del_mtd_partitions(mtd);
++		map_destroy(mtd);
++	}
++#ifdef CONFIG_SL2312_SHARE_PIN
++    sl2312flash_disable_parallel_flash();      /* disable Parallel FLASH */
++#endif
++    printk("SL2312 MTD Driver Init Success ......\n");
++	return ret;
++}
++
++static void __exit sl2312flash_exit(void)
++{
++	if (mtd) {
++		del_mtd_partitions(mtd);
++		map_destroy(mtd);
++	}
++
++	if (sl2312flash_map.virt) {
++	    iounmap((void *)sl2312flash_map.virt);
++	    sl2312flash_map.virt = 0;
++	}
++}
++
++char chrtohex(char c)
++{
++  char val;
++  if ((c >= '0') && (c <= '9'))
++  {
++    val = c - '0';
++    return val;
++  }
++  else if ((c >= 'a') && (c <= 'f'))
++  {
++    val = 10 + (c - 'a');
++    return val;
++  }
++  else if ((c >= 'A') && (c <= 'F'))
++  {
++    val = 10 + (c - 'A');
++    return val;
++  }
++  printk("<1>Error number\n");
++  return 0;
++}
++
++
++int get_vlaninfo(vlaninfo* vlan)
++{
++	vctl_mheader head;
++	vctl_entry entry;
++	struct mtd_info *mymtd=NULL;
++	int i, j, loc = 0;
++	char *payload=0, *tmp1, *tmp2, tmp3[9];
++	size_t retlen;
++
++	#ifdef CONFIG_SL2312_SHARE_PIN
++	sl2312flash_enable_parallel_flash();
++	#endif
++	for(i=0;iname: %s\n", mymtd->name);
++		if(mymtd && !strcmp(mymtd->name,"VCTL"))
++		{
++			//      printk("%s\n", mymtd->name);
++			break;
++		}
++	}
++	if( i >= MAX_MTD_DEVICES)
++	{
++		printk("Can't find version control\n");
++		#ifdef CONFIG_SL2312_SHARE_PIN
++		sl2312flash_disable_parallel_flash();
++		#endif
++		return 0;
++	}
++
++	if (!mymtd | !mymtd->read)
++	{
++		printk("<1>Can't read Version Configuration\n");
++		#ifdef CONFIG_SL2312_SHARE_PIN
++		sl2312flash_disable_parallel_flash();
++		#endif
++		return 0;
++	}
++
++	mymtd->read(mymtd, 0, VCTL_HEAD_SIZE, &retlen, (u_char*)&head);
++	//  printk("entry header: %c%c%c%c\n", head.header[0], head.header[1], head.header[2], head.header[3]);
++	//  printk("entry number: %x\n", head.entry_num);
++	if ( strncmp(head.header, "FLFM", 4) )
++	{
++		printk("VCTL is a erase block\n");
++		#ifdef CONFIG_SL2312_SHARE_PIN
++		sl2312flash_disable_parallel_flash();
++		#endif
++		return 0;
++	}
++	loc += retlen;
++	for (i = 0; i < head.entry_num; i++)
++	{
++		mymtd->read(mymtd, loc, VCTL_ENTRY_LEN, &retlen, (u_char*)&entry);
++		//    printk("type: %x\n", entry.type);
++		//    printk("size: %x\n", entry.size);
++		strncpy(tmp3, entry.header, 4);
++		if (entry.type == VCT_VLAN)
++		{
++			for (j = 0; j < 6 ; j++)
++			{
++				vlan[0].mac[j] = 0;
++				vlan[1].mac[j] = 0;
++			}
++			vlan[0].vlanid = 1;
++			vlan[1].vlanid = 2;
++			vlan[0].vlanmap = 0x7F;
++			vlan[1].vlanmap = 0x80;
++
++			payload = (char *)kmalloc(entry.size - VCTL_ENTRY_LEN, GFP_KERNEL);
++			loc += VCTL_ENTRY_LEN;
++			mymtd->read(mymtd, loc, entry.size - VCTL_ENTRY_LEN, &retlen, payload);
++			//      printk("%s\n", payload);
++			tmp1 = strstr(payload, "MAC1:");
++			tmp2 = strstr(payload, "MAC2:");
++			if(!tmp1||!tmp2){
++				kfree(payload);
++				#ifdef CONFIG_SL2312_SHARE_PIN
++				sl2312flash_disable_parallel_flash();
++				#endif
++				printk("Error VCTL format!!\n");
++				return 0;
++			}
++			tmp1 += 7;
++			tmp2 += 7;
++
++
++			for (j = 0; j < 6; j++)
++			{
++				vlan[0].mac[j] = chrtohex(tmp1[2*j])*16 + chrtohex(tmp1[(2*j)+1]);
++				vlan[1].mac[j] = chrtohex(tmp2[2*j])*16 + chrtohex(tmp2[(2*j)+1]);
++			}
++			tmp1 = strstr(payload, "ID1:");
++			tmp2 = strstr(payload, "ID2:");
++			tmp1 += 4;
++			tmp2 += 4;
++			vlan[0].vlanid = tmp1[0] - '0';
++			vlan[1].vlanid = tmp2[0] - '0';
++			tmp1 = strstr(payload, "MAP1:");
++			tmp2 = strstr(payload, "MAP2:");
++			tmp1 += 7;
++			tmp2 += 7;
++			vlan[0].vlanmap = chrtohex(tmp1[0]) * 16 + chrtohex(tmp1[1]);
++			vlan[1].vlanmap = chrtohex(tmp2[0]) * 16 + chrtohex(tmp2[1]);
++			//  printk("Vlan1 id:%x map:%02x mac:%x%x%x%x%x%x\n", vlan[0].vlanid, vlan[0].vlanmap, vlan[0].mac[0], vlan[0].mac[1], vlan[0].mac[2], vlan[0].mac[3], vlan[0].mac[4], vlan[0].mac[5]);
++			//  printk("Vlan2 id:%x map:%02x mac:%x%x%x%x%x%x\n", vlan[1].vlanid, vlan[1].vlanmap, vlan[1].mac[0], vlan[1].mac[1], vlan[1].mac[2], vlan[1].mac[3], vlan[1].mac[4], vlan[1].mac[5]);
++			break;
++		}
++		loc += entry.size;
++	}
++	if ( entry.type == VCT_VLAN )
++	{
++		#ifdef CONFIG_SL2312_SHARE_PIN
++		sl2312flash_disable_parallel_flash();
++		#endif
++		kfree(payload);
++		return 1;
++	}
++	if (i >= head.entry_num)
++	printk("Can't find vlan information\n");
++	#ifdef CONFIG_SL2312_SHARE_PIN
++	sl2312flash_disable_parallel_flash();
++	#endif
++	return 0;
++}
++
++EXPORT_SYMBOL(get_vlaninfo);
++
++
++module_init(sl2312flash_init);
++module_exit(sl2312flash_exit);
++
++MODULE_AUTHOR("Storlink Ltd");
++MODULE_DESCRIPTION("CFI map driver");
++MODULE_LICENSE("GPL");
+--- /dev/null
++++ b/drivers/mtd/maps/sl2312-flash-m25p80.c
+@@ -0,0 +1,498 @@
++/*
++ * $Id: sl2312-flash-m25p80.c,v 1.2 2006/06/02 08:46:02 middle Exp $
++ *
++ * Flash and EPROM on Hitachi Solution Engine and similar boards.
++ *
++ * (C) 2001 Red Hat, Inc.
++ *
++ * GPL'd
++ */
++
++#include 
++#include 
++#include 
++
++#include 
++#include 
++#include 
++#include 
++#include 
++
++#include 
++#include 
++#include  //add
++#define  g_chipen     SERIAL_FLASH_CHIP0_EN   //ST
++
++//static int m25p80_page_program(__u32 address, __u8 data, __u32 schip_en);
++static void m25p80_write_cmd(__u8 cmd, __u32 schip_en);
++extern int parse_redboot_partitions(struct mtd_info *master, struct mtd_partition **pparts);
++
++
++static __u32 read_flash_ctrl_reg(__u32 ofs)
++{
++    __u32 *base;
++
++    base = (__u32 *)IO_ADDRESS((SL2312_FLASH_CTRL_BASE + ofs));
++    return __raw_readl(base);
++}
++
++static void write_flash_ctrl_reg(__u32 ofs,__u32 data)
++{
++    __u32 *base;
++
++    base = (__u32 *)IO_ADDRESS((SL2312_FLASH_CTRL_BASE + ofs));
++    __raw_writel(data, base);
++}
++
++static void m25p80_read(__u32 address, __u8 *data, __u32 schip_en)
++{
++      __u32 opcode,status;
++      __u32 value;
++
++      //opcode = 0x80000000 | FLASH_ACCESS_ACTION_OPCODE_DATA | M25P80_READ;
++      opcode = 0x80000000 | FLASH_ACCESS_ACTION_SHIFT_ADDRESS_DATA | M25P80_READ;
++      write_flash_ctrl_reg(FLASH_ADDRESS_OFFSET, address);
++
++      	opcode|=g_chipen;
++
++      write_flash_ctrl_reg(FLASH_ACCESS_OFFSET, opcode);
++      status=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET);
++      while(status&0x80000000)
++      {
++          status=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET);
++          flash_delay();
++          schedule();
++      }
++
++      value=read_flash_ctrl_reg(FLASH_READ_DATA_OFFSET);
++      *data = value & 0xff;
++}
++
++static int m25p80_page_program(__u32 address, __u8 *data, __u32 schip_en)
++{
++      __u32 opcode;
++      __u32  status;
++	  __u32 tmp;
++	  int res = FLASH_ERR_OK;
++	  //volatile FLASH_DATA_T* data_ptr = (volatile FLASH_DATA_T*) data;
++	  opcode = 0x80000000 | FLASH_ACCESS_ACTION_OPCODE_DATA | M25P80_READ_STATUS;
++
++      	      opcode|=g_chipen;
++
++          write_flash_ctrl_reg(FLASH_ACCESS_OFFSET, opcode);
++          tmp=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET);
++      			while(tmp&0x80000000)
++      			{
++      			    tmp=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET);
++      			    flash_delay();
++      			    schedule();
++      			}
++          //middle delay_ms(130);
++          status = read_flash_ctrl_reg(FLASH_READ_DATA_OFFSET);
++          if((status&0x02)==0x02)
++      	  {
++      	       //middle delay_ms(100);
++               m25p80_write_cmd(M25P80_WRITE_DISABLE, schip_en);
++          }
++
++
++      m25p80_write_cmd(M25P80_WRITE_ENABLE, schip_en);
++      ////middle delay_ms(10);
++      opcode = 0x80000000 | FLASH_ACCESS_ACTION_SHIFT_ADDRESS_DATA | M25P80_PAGE_PROGRAM;
++      write_flash_ctrl_reg(FLASH_ADDRESS_OFFSET, address);
++      write_flash_ctrl_reg(FLASH_WRITE_DATA_OFFSET, *data);
++
++      //status = read_flash_ctrl_reg(FLASH_READ_DATA_OFFSET);
++      //while(status!=data)
++      //{
++      //    status = read_flash_ctrl_reg(FLASH_READ_DATA_OFFSET);
++      //    //middle delay_ms(10);
++      //}
++
++      	opcode|=g_chipen;
++
++      write_flash_ctrl_reg(FLASH_ACCESS_OFFSET, opcode);
++      tmp=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET);
++      			while(tmp&0x80000000)
++      			{
++      			    tmp=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET);
++      			    flash_delay();
++      			    schedule();
++      			}
++      //opcode=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET);
++
++      opcode = 0x80000000 | FLASH_ACCESS_ACTION_OPCODE_DATA | M25P80_READ_STATUS;
++
++      	opcode|=g_chipen;
++
++
++      write_flash_ctrl_reg(FLASH_ACCESS_OFFSET, opcode);
++      tmp=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET);
++      			while(tmp&0x80000000)
++      			{
++      			    tmp=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET);
++      			    flash_delay();
++      			    schedule();
++      			}
++      status = read_flash_ctrl_reg(FLASH_READ_DATA_OFFSET);
++      //while(status&0xfd)
++      while(status&0x01)
++      {
++      	  //if((status&0x9c)!=0)
++      	  //	printf("  m25p80_page_program	Protect Status = %x\n",status);
++      	  write_flash_ctrl_reg(FLASH_ACCESS_OFFSET, opcode);
++      	  tmp=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET);
++      			while(tmp&0x80000000)
++      			{
++      			    tmp=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET);
++      			    flash_delay();
++      			    schedule();
++      			}
++          status = read_flash_ctrl_reg(FLASH_READ_DATA_OFFSET);
++          flash_delay();
++          schedule();
++          //middle delay_ms(50);
++      }
++      //printf("status = %x, data = %x\n",status,data);
++      if((status&0x02)==0x02)
++      {
++	  //middle delay_ms(100);
++          m25p80_write_cmd(M25P80_WRITE_DISABLE, schip_en);
++      }
++    //};//while (len > 0)
++    return res;
++}
++
++void m25p80_copy_from(struct map_info *map, void *buf, unsigned long ofs, ssize_t len)
++{
++//     __u32 size;
++     __u8  *buffer;
++     __u32 length;//i, j,
++
++	length = len;
++     buffer = (__u8 *)buf;
++     while(len)
++     {
++        m25p80_read(ofs, buffer, g_chipen);
++        buffer++;
++        ofs++;
++        len --;
++     }	;
++
++}
++
++__u32 m25p80_read32(struct map_info *map, unsigned long ofs)
++{
++
++      return read_flash_ctrl_reg(ofs);
++
++
++}
++
++void m25p80_write32(struct map_info *map, __u32 d, unsigned long ofs)
++{
++
++      write_flash_ctrl_reg(ofs, d);
++
++}
++
++void m25p80_copy_to(struct map_info *map, unsigned long ofs, void *buf, ssize_t len)
++{
++     __u32 size, i, ret;
++
++     while(len > 0)
++     {
++        if(len >= M25P80_PAGE_SIZE)
++			size = M25P80_PAGE_SIZE;
++		else
++			size = len;
++
++        for(i=0;im25p80_sector_erase");
++	if(address >= FLASH_START)
++		address-=FLASH_START;
++
++      m25p80_write_cmd(M25P80_WRITE_ENABLE, schip_en);
++      //printf("\n     m25p80_sector_erase : after we-en");
++      opcode = 0x80000000 | FLASH_ACCESS_ACTION_SHIFT_ADDRESS | M25P80_SECTOR_ERASE;
++      write_flash_ctrl_reg(FLASH_ADDRESS_OFFSET, address);
++      #ifdef MIDWAY_DIAG
++      	opcode|=schip_en;
++      #endif
++      write_flash_ctrl_reg(FLASH_ACCESS_OFFSET, opcode);
++      tmp=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET);
++      			while(tmp&0x80000000)
++      			{
++      			    tmp=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET);
++      			    flash_delay();
++      			    schedule();
++      			}
++
++      opcode = 0x80000000 | FLASH_ACCESS_ACTION_OPCODE_DATA | M25P80_READ_STATUS;
++      #ifdef MIDWAY_DIAG
++      	opcode|=schip_en;
++      #endif
++
++      write_flash_ctrl_reg(FLASH_ACCESS_OFFSET, opcode);
++      tmp=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET);
++      			while(tmp&0x80000000)
++      			{
++      			    tmp=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET);
++      			    flash_delay();
++      			    schedule();
++      			}
++      status = read_flash_ctrl_reg(FLASH_READ_DATA_OFFSET);
++      //while(status&0xfd)
++      while(status&0x01)
++      {
++      	  //if((status&0x9c)!=0)
++      	  //	printf("  m25p80_sector_erase	Protect Status = %x\n",status);
++      	  write_flash_ctrl_reg(FLASH_ACCESS_OFFSET, opcode);
++      	  tmp=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET);
++      			while(tmp&0x80000000)
++      			{
++      			    tmp=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET);
++      			    flash_delay();
++      			    schedule();
++      			}
++          status = read_flash_ctrl_reg(FLASH_READ_DATA_OFFSET);
++          flash_delay();
++          schedule();
++          //middle delay_ms(50);
++      }
++      if((status&0x02)==0x02)
++      {
++      	  //middle delay_ms(100);
++          m25p80_write_cmd(M25P80_WRITE_DISABLE, schip_en);
++      }
++      //printf("\n<--m25p80_sector_erase");
++      return res;
++}
++
++static void m25p80_write_cmd(__u8 cmd, __u32 schip_en)
++{
++      __u32 opcode,tmp;
++      __u32  status;
++
++
++
++
++      opcode = 0x80000000 | FLASH_ACCESS_ACTION_OPCODE | cmd;
++
++      	opcode|=g_chipen;
++
++      write_flash_ctrl_reg(FLASH_ACCESS_OFFSET, opcode);
++      tmp=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET);
++      while(tmp&0x80000000)
++      {
++          tmp=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET);
++          flash_delay();
++          schedule();
++      }
++      //////
++      opcode = 0x80000000 | FLASH_ACCESS_ACTION_OPCODE_DATA | M25P80_READ_STATUS;
++
++      	opcode|=g_chipen;
++
++      write_flash_ctrl_reg(FLASH_ACCESS_OFFSET, opcode);
++      tmp=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET);
++      while(tmp&0x80000000)
++      {
++          tmp=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET);
++          flash_delay();
++          schedule();
++      }
++      //middle delay_ms(130);
++      status = read_flash_ctrl_reg(FLASH_READ_DATA_OFFSET);
++      //printf("\ncmd =%x  status = %x",cmd,status);
++      if(cmd==M25P80_WRITE_ENABLE)
++      {
++      	//printf("\n**-->enable**  status = %x",status);
++      	//middle delay_ms(100);
++      	   while((status&0x03) != 2)
++      	   {
++      	   	//if((status&0x9c)!=0)
++      	  	//    printf("	M25P80_WRITE_ENABLE   Protect Status = %x\n",status);
++
++      	   	  write_flash_ctrl_reg(FLASH_ACCESS_OFFSET, opcode);
++      	   	  tmp=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET);
++      			while(tmp&0x80000000)
++      			{
++      			    tmp=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET);
++      			    //flash_delay();
++      			}
++      	       status = read_flash_ctrl_reg(FLASH_READ_DATA_OFFSET);
++      	       //printf("\n**enable**  status = %x",status);
++      	       flash_delay();
++      	       schedule();
++      	       //middle delay_ms(100);
++      	   }
++      }
++      else if(cmd==M25P80_WRITE_DISABLE)
++      {
++      	   //while((status&0x03) == 2)
++      	   //   printf("\n**disable**  status = %x",status);
++      	   //middle delay_ms(100);
++      	   while((status&0x03) != 0)
++      	   {
++	       //m25p80_write_status((status&0xfd),schip_en);
++      	       write_flash_ctrl_reg(FLASH_ACCESS_OFFSET, opcode);
++      	       tmp=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET);
++      		while(tmp&0x80000000)
++      		{
++      		    tmp=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET);
++      		    flash_delay();
++      		    schedule();
++      		}
++      	       status = read_flash_ctrl_reg(FLASH_READ_DATA_OFFSET);
++      	       //printf("\n**disable**  status = %x",status);
++      	       flash_delay();
++      	       schedule();
++      	       //middle delay_ms(50);
++      	   }
++      }
++      else
++      {
++      	   //while((status&0x01) !=0)
++      	   while((status&0x01) !=0)
++      	   {
++      	   	  write_flash_ctrl_reg(FLASH_ACCESS_OFFSET, opcode);
++      	   	  tmp=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET);
++      			while(tmp&0x80000000)
++      			{
++      			    tmp=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET);
++      			    flash_delay();
++      			    schedule();
++      			}
++      	       status = read_flash_ctrl_reg(FLASH_READ_DATA_OFFSET);
++      	       flash_delay();
++      	       schedule();
++      	       //middle delay_ms(50);
++      	   }
++      }
++      //////
++
++      //printf("\n<--  status = %x",status);
++}
++
++static int __init init_sl2312_m25p80(void)
++{
++	int nr_parts = 0;
++	struct mtd_partition *parts;
++
++	serial_mtd = kmalloc(sizeof(struct mtd_info), GFP_KERNEL);
++	if (!serial_mtd)
++		return NULL;
++
++	memset(serial_mtd, 0, sizeof(struct mtd_info));
++	m25p80_map.virt = (unsigned long)ioremap(SL2312_FLASH_BASE, SFLASH_SIZE);//(unsigned long)ioremap(FLASH_START, SFLASH_SIZE);
++    if (!m25p80_map.virt) {
++		printk(" failed to ioremap \n");
++		return -EIO;
++	}
++	serial_mtd = do_map_probe("map_serial", &m25p80_map);
++	if (serial_mtd) {
++		serial_mtd->owner = THIS_MODULE;
++
++	}
++
++#ifdef CONFIG_MTD_REDBOOT_PARTS
++	nr_parts = parse_redboot_partitions(serial_mtd, &parsed_parts);
++	if (nr_parts > 0)
++		printk(KERN_NOTICE "Found RedBoot partition table.\n");
++	else if (nr_parts < 0)
++		printk(KERN_NOTICE "Error looking for RedBoot partitions.\n");
++#else
++	parsed_parts = m25p80_partitions;
++	parts = m25p80_partitions;
++	nr_parts = sizeof(m25p80_partitions)/sizeof(*parts);
++	nr_parts = sizeof(m25p80_partitions)/sizeof(*parsed_parts);
++#endif /* CONFIG_MTD_REDBOOT_PARTS */
++
++	if (nr_parts > 0)
++	    add_mtd_partitions(serial_mtd, parsed_parts, nr_parts);
++	else
++	    add_mtd_device(serial_mtd);
++
++	return 0;
++}
++
++static void __exit cleanup_sl2312_m25p80(void)
++{
++	if (parsed_parts)
++	    del_mtd_partitions(serial_mtd);
++	else
++	    del_mtd_device(serial_mtd);
++
++	map_destroy(serial_mtd);
++
++
++}
++
++module_init(init_sl2312_m25p80);
++module_exit(cleanup_sl2312_m25p80);
++
++
++
++MODULE_LICENSE("GPL");
++MODULE_AUTHOR("Plus Chen ");
++MODULE_DESCRIPTION("MTD map driver for Storlink Sword boards");
++
+--- /dev/null
++++ b/drivers/mtd/maps/sl2312_flashmap.h
+@@ -0,0 +1,21 @@
++/*
++ * Please note that the name are used in mkflash script. Therefore
++ * don't change them.  If you want to add different partitions, you
++ * will need to modify mkflash script as well so that the end image
++ * is what you include here!
++ *
++ * Also, the 7th item is always the size, so please don't add extra
++ * spaces in the name or other items.
++ *
++ *  - Alan
++ */
++
++static struct mtd_partition sl2312_partitions[] = {
++	{ name: "RedBoot", 	 offset: 0x00000000, size: 0x00020000, },
++	{ name: "kernel", 	 offset: 0x00020000, size: 0x00100000, },
++	{ name: "rootfs", 	 offset: 0x00120000, size: 0x00500000, },
++	{ name: "rootfs_data", 	 offset: 0x00620000, size: 0x001A0000, },
++	{ name: "VCTL", 	 offset: 0x007C0000, size: 0x00010000, },
++	{ name: "cfg", 	 	 offset: 0x007D0000, size: 0x00020000, },
++	{ name: "FIS directory", offset: 0x007F0000, size: 0x00010000, }
++};
+--- /dev/null
++++ b/drivers/mtd/maps/sl2312_flashmap.h.16MB
+@@ -0,0 +1,21 @@
++/*
++ * Please note that the name are used in mkflash script. Therefore
++ * don't change them.  If you want to add different partitions, you
++ * will need to modify mkflash script as well so that the end image
++ * is what you include here!
++ *
++ * Also, the 7th item is always the size, so please don't add extra
++ * spaces in the name or other items.
++ *
++ *  - Alan
++ */
++
++static struct mtd_partition sl2312_partitions[] = {
++	{ name: "RedBoot",     	 offset: 0x00000000, size: 0x00020000, },
++	{ name: "Kernel",      	 offset: 0x00020000, size: 0x00300000, },
++	{ name: "Ramdisk",     	 offset: 0x00320000, size: 0x00600000, },
++	{ name: "Application", 	 offset: 0x00920000, size: 0x00600000, },
++	{ name: "VCTL", 	 offset: 0x00F20000, size: 0x00020000, },
++	{ name: "CurConf", 	 offset: 0x00F40000, size: 0x000A0000, },
++	{ name: "FIS directory", offset: 0x00FE0000, size: 0x00020000, }
++};
+--- /dev/null
++++ b/drivers/mtd/maps/sl2312_flashmap.h.8MB
+@@ -0,0 +1,21 @@
++/*
++ * Please note that the name are used in mkflash script. Therefore
++ * don't change them.  If you want to add different partitions, you
++ * will need to modify mkflash script as well so that the end image
++ * is what you include here!
++ *
++ * Also, the 7th item is always the size, so please don't add extra
++ * spaces in the name or other items.
++ *
++ *  - Alan
++ */
++
++static struct mtd_partition sl2312_partitions[] = {
++	{ name: "RedBoot", 	 offset: 0x00000000, size: 0x00020000, },
++	{ name: "Kernel", 	 offset: 0x00020000, size: 0x00200000, },
++	{ name: "Ramdisk", 	 offset: 0x00220000, size: 0x00280000, },
++	{ name: "Application", 	 offset: 0x004A0000, size: 0x00300000, },
++	{ name: "VCTL", 	 offset: 0x007A0000, size: 0x00020000, },
++	{ name: "CurConf", 	 offset: 0x007C0000, size: 0x00020000, },
++	{ name: "FIS directory", offset: 0x007E0000, size: 0x00020000, }
++};
+--- a/drivers/mtd/mtdchar.c
++++ b/drivers/mtd/mtdchar.c
+@@ -59,6 +59,77 @@
+ 	enum mtd_file_modes mode;
+ };
+ 
++/***********************************************************************
++/*             Storlink SoC -- flash
++/***********************************************************************/
++#ifdef CONFIG_SL2312_SHARE_PIN
++unsigned int share_pin_flag=0;		// bit0:FLASH, bit1:UART, bit2:EMAC, bit3-4:IDE
++unsigned int check_sleep_flag=0;	// bit0:FLASH, bit1:IDE
++static spinlock_t sl2312_flash_lock = SPIN_LOCK_UNLOCKED;
++EXPORT_SYMBOL(share_pin_flag);
++int dbg=0;
++DECLARE_WAIT_QUEUE_HEAD(wq);
++extern struct wait_queue_head_t *flash_wait;
++unsigned int flash_req=0;
++void mtd_lock()
++{
++	struct task_struct *tsk = current;
++	unsigned int value ;
++	unsigned long flags;
++	flash_req = 1;
++	DECLARE_WAITQUEUE(wait, tsk);
++	add_wait_queue(&wq, &wait);
++	for(;;)
++	{
++		set_task_state(tsk, TASK_INTERRUPTIBLE);
++		spin_lock_irqsave(&sl2312_flash_lock,flags);
++		if((share_pin_flag&0x1E)){//||(check_sleep_flag&0x00000002)) {
++			spin_unlock_irqrestore(&sl2312_flash_lock, flags);
++			check_sleep_flag |= 0x00000001;
++			if(dbg)
++				printk("mtd yield %x %x\n",share_pin_flag,check_sleep_flag);
++			wake_up_interruptible(&flash_wait);
++			schedule();
++		}
++		else {
++			check_sleep_flag &= ~0x01;
++			share_pin_flag |= 0x00000001 ;			// set share pin flag
++			spin_unlock_irqrestore(&sl2312_flash_lock, flags);
++			value = readl(IO_ADDRESS((SL2312_GLOBAL_BASE+GLOBAL_MISC_REG)));
++			value = value & (~PFLASH_SHARE_BIT) ;
++			writel(value,IO_ADDRESS((SL2312_GLOBAL_BASE+GLOBAL_MISC_REG)));
++			if(dbg)
++				printk("mtd Go %x %x\n",share_pin_flag,check_sleep_flag);
++			tsk->state = TASK_RUNNING;
++			remove_wait_queue(&wq, &wait);
++			return ;
++		}
++	}
++}
++
++void mtd_unlock()
++{
++	unsigned int value ;
++	unsigned long flags;
++
++	spin_lock_irqsave(&sl2312_flash_lock,flags);		// Disable IRQ
++	value = readl(IO_ADDRESS((SL2312_GLOBAL_BASE+GLOBAL_MISC_REG)));
++	value = value | PFLASH_SHARE_BIT ;				// Disable Flash PADs
++	writel(value,IO_ADDRESS((SL2312_GLOBAL_BASE+GLOBAL_MISC_REG)));
++	share_pin_flag &= ~(0x00000001);			// clear share pin flag
++	check_sleep_flag &= ~0x00000001;
++	spin_unlock_irqrestore(&sl2312_flash_lock, flags);	// Restore IRQ
++	if (check_sleep_flag & 0x00000002)
++	{
++		check_sleep_flag &= ~(0x00000002);
++		wake_up_interruptible(&flash_wait);
++	}
++	DEBUG(MTD_DEBUG_LEVEL0, "Flash Unlock...\n");
++	flash_req = 0;
++}
++#endif
++/***********************************************************************/
++
+ static loff_t mtd_lseek (struct file *file, loff_t offset, int orig)
+ {
+ 	struct mtd_file_info *mfi = file->private_data;
+@@ -162,13 +233,21 @@
+ 	int len;
+ 	char *kbuf;
+ 
++#ifdef CONFIG_SL2312_SHARE_PIN
++	mtd_lock();				// sl2312 share pin lock
++#endif
++
+ 	DEBUG(MTD_DEBUG_LEVEL0,"MTD_read\n");
+ 
+ 	if (*ppos + count > mtd->size)
+ 		count = mtd->size - *ppos;
+ 
+-	if (!count)
++	if (!count){
++#ifdef CONFIG_SL2312_SHARE_PIN
++	mtd_unlock();				// sl2312 share pin lock
++#endif
+ 		return 0;
++	}
+ 
+ 	/* FIXME: Use kiovec in 2.5 to lock down the user's buffers
+ 	   and pass them directly to the MTD functions */
+@@ -178,8 +257,12 @@
+ 	else
+ 		kbuf=kmalloc(count, GFP_KERNEL);
+ 
+-	if (!kbuf)
++	if (!kbuf) {
++#ifdef CONFIG_SL2312_SHARE_PIN
++	mtd_unlock();				// sl2312 share pin lock
++#endif
+ 		return -ENOMEM;
++	}
+ 
+ 	while (count) {
+ 
+@@ -224,6 +307,9 @@
+ 			*ppos += retlen;
+ 			if (copy_to_user(buf, kbuf, retlen)) {
+ 				kfree(kbuf);
++#ifdef CONFIG_SL2312_SHARE_PIN
++				mtd_unlock();				// sl2312 share pin lock
++#endif
+ 				return -EFAULT;
+ 			}
+ 			else
+@@ -235,13 +321,19 @@
+ 				count = 0;
+ 		}
+ 		else {
+-			kfree(kbuf);
++	 		kfree(kbuf);
++#ifdef CONFIG_SL2312_SHARE_PIN
++			mtd_unlock();				// sl2312 share pin lock
++#endif
+ 			return ret;
+ 		}
+ 
+ 	}
+ 
+ 	kfree(kbuf);
++#ifdef CONFIG_SL2312_SHARE_PIN
++	mtd_unlock();				// sl2312 share pin lock
++#endif
+ 	return total_retlen;
+ } /* mtd_read */
+ 
+@@ -255,24 +347,40 @@
+ 	int ret=0;
+ 	int len;
+ 
++#ifdef CONFIG_SL2312_SHARE_PIN
++	mtd_lock();				// sl2312 share pin lock
++#endif
++
+ 	DEBUG(MTD_DEBUG_LEVEL0,"MTD_write\n");
+ 
+-	if (*ppos == mtd->size)
++	if (*ppos == mtd->size){
++#ifdef CONFIG_SL2312_SHARE_PIN
++	mtd_unlock();				// sl2312 share pin lock
++#endif
+ 		return -ENOSPC;
++	}
+ 
+ 	if (*ppos + count > mtd->size)
+ 		count = mtd->size - *ppos;
+ 
+-	if (!count)
++	if (!count){
++#ifdef CONFIG_SL2312_SHARE_PIN
++	mtd_unlock();				// sl2312 share pin lock
++#endif
+ 		return 0;
++	}
+ 
+ 	if (count > MAX_KMALLOC_SIZE)
+ 		kbuf=kmalloc(MAX_KMALLOC_SIZE, GFP_KERNEL);
+ 	else
+ 		kbuf=kmalloc(count, GFP_KERNEL);
+ 
+-	if (!kbuf)
++	if (!kbuf) {
++#ifdef CONFIG_SL2312_SHARE_PIN
++		mtd_unlock();				// sl2312 share pin lock
++#endif
+ 		return -ENOMEM;
++	}
+ 
+ 	while (count) {
+ 
+@@ -283,6 +391,9 @@
+ 
+ 		if (copy_from_user(kbuf, buf, len)) {
+ 			kfree(kbuf);
++#ifdef CONFIG_SL2312_SHARE_PIN
++			mtd_unlock();				// sl2312 share pin lock
++#endif
+ 			return -EFAULT;
+ 		}
+ 
+@@ -323,11 +434,17 @@
+ 		}
+ 		else {
+ 			kfree(kbuf);
++#ifdef CONFIG_SL2312_SHARE_PIN
++			mtd_unlock();				// sl2312 share pin lock
++#endif
+ 			return ret;
+ 		}
+ 	}
+ 
+ 	kfree(kbuf);
++#ifdef CONFIG_SL2312_SHARE_PIN
++	mtd_unlock();				// sl2312 share pin lock
++#endif
+ 	return total_retlen;
+ } /* mtd_write */
+ 
+@@ -381,36 +498,67 @@
+ 	u_long size;
+ 	struct mtd_info_user info;
+ 
++#ifdef CONFIG_SL2312_SHARE_PIN
++	mtd_lock();				// sl2312 share pin lock
++#endif
++
+ 	DEBUG(MTD_DEBUG_LEVEL0, "MTD_ioctl\n");
+ 
+ 	size = (cmd & IOCSIZE_MASK) >> IOCSIZE_SHIFT;
+ 	if (cmd & IOC_IN) {
+ 		if (!access_ok(VERIFY_READ, argp, size))
++		{
++#ifdef CONFIG_SL2312_SHARE_PIN
++			mtd_unlock();				// sl2312 share pin lock
++#endif
+ 			return -EFAULT;
++		}
+ 	}
+ 	if (cmd & IOC_OUT) {
+ 		if (!access_ok(VERIFY_WRITE, argp, size))
++		{
++#ifdef CONFIG_SL2312_SHARE_PIN
++			mtd_unlock();				// sl2312 share pin lock
++#endif
+ 			return -EFAULT;
++		}
+ 	}
+ 
+ 	switch (cmd) {
+ 	case MEMGETREGIONCOUNT:
+ 		if (copy_to_user(argp, &(mtd->numeraseregions), sizeof(int)))
++		{
++#ifdef CONFIG_SL2312_SHARE_PIN
++			mtd_unlock();				// sl2312 share pin lock
++#endif
+ 			return -EFAULT;
++		}
+ 		break;
+ 
+ 	case MEMGETREGIONINFO:
+ 	{
+ 		struct region_info_user ur;
+ 
+-		if (copy_from_user(&ur, argp, sizeof(struct region_info_user)))
++		if (copy_from_user(&ur, argp, sizeof(struct region_info_user))) {
++#ifdef CONFIG_SL2312_SHARE_PIN
++			mtd_unlock();				// sl2312 share pin lock
++#endif
+ 			return -EFAULT;
++		}
+ 
+-		if (ur.regionindex >= mtd->numeraseregions)
++		if (ur.regionindex >= mtd->numeraseregions) {
++#ifdef CONFIG_SL2312_SHARE_PIN
++			mtd_unlock();				// sl2312 share pin lock
++#endif
+ 			return -EINVAL;
++		}
+ 		if (copy_to_user(argp, &(mtd->eraseregions[ur.regionindex]),
+-				sizeof(struct mtd_erase_region_info)))
++				sizeof(struct mtd_erase_region_info))) {
++#ifdef CONFIG_SL2312_SHARE_PIN
++			mtd_unlock();				// sl2312 share pin lock
++#endif
+ 			return -EFAULT;
++		}
+ 		break;
+ 	}
+ 
+@@ -433,7 +581,12 @@
+ 		struct erase_info *erase;
+ 
+ 		if(!(file->f_mode & 2))
++		{
++#ifdef CONFIG_SL2312_SHARE_PIN
++			mtd_unlock();				// sl2312 share pin lock
++#endif
+ 			return -EPERM;
++		}
+ 
+ 		erase=kzalloc(sizeof(struct erase_info),GFP_KERNEL);
+ 		if (!erase)
+@@ -447,6 +600,9 @@
+ 			if (copy_from_user(&erase->addr, argp,
+ 				    sizeof(struct erase_info_user))) {
+ 				kfree(erase);
++#ifdef CONFIG_SL2312_SHARE_PIN
++				mtd_unlock();				// sl2312 share pin lock
++#endif
+ 				return -EFAULT;
+ 			}
+ 			erase->mtd = mtd;
+@@ -484,14 +640,26 @@
+ 		struct mtd_oob_buf buf;
+ 		struct mtd_oob_ops ops;
+ 
+-		if(!(file->f_mode & 2))
++		if(!(file->f_mode & 2)) {
++#ifdef CONFIG_SL2312_SHARE_PIN
++			mtd_unlock();				// sl2312 share pin lock
++#endif
+ 			return -EPERM;
++		}
+ 
+-		if (copy_from_user(&buf, argp, sizeof(struct mtd_oob_buf)))
++		if (copy_from_user(&buf, argp, sizeof(struct mtd_oob_buf))) {
++#ifdef CONFIG_SL2312_SHARE_PIN
++			mtd_unlock();				// sl2312 share pin lock
++#endif
+ 			return -EFAULT;
++		}
+ 
+-		if (buf.length > 4096)
++		if (buf.length > 4096) {
++#ifdef CONFIG_SL2312_SHARE_PIN
++			mtd_unlock();				// sl2312 share pin lock
++#endif
+ 			return -EINVAL;
++		}
+ 
+ 		if (!mtd->write_oob)
+ 			ret = -EOPNOTSUPP;
+@@ -499,8 +667,12 @@
+ 			ret = access_ok(VERIFY_READ, buf.ptr,
+ 					buf.length) ? 0 : EFAULT;
+ 
+-		if (ret)
++		if (ret) {
++#ifdef CONFIG_SL2312_SHARE_PIN
++			mtd_unlock();				// sl2312 share pin lock
++#endif
+ 			return ret;
++		}
+ 
+ 		ops.ooblen = buf.length;
+ 		ops.ooboffs = buf.start & (mtd->oobsize - 1);
+@@ -536,19 +708,35 @@
+ 		struct mtd_oob_buf buf;
+ 		struct mtd_oob_ops ops;
+ 
+-		if (copy_from_user(&buf, argp, sizeof(struct mtd_oob_buf)))
++		if (copy_from_user(&buf, argp, sizeof(struct mtd_oob_buf))) {
++#ifdef CONFIG_SL2312_SHARE_PIN
++			mtd_unlock();				// sl2312 share pin lock
++#endif
+ 			return -EFAULT;
++		}
+ 
+-		if (buf.length > 4096)
++		if (buf.length > 4096) {
++#ifdef CONFIG_SL2312_SHARE_PIN
++			mtd_unlock();				// sl2312 share pin lock
++#endif
+ 			return -EINVAL;
++		}
+ 
+-		if (!mtd->read_oob)
++		if (!mtd->read_oob) {
++#ifdef CONFIG_SL2312_SHARE_PIN
++			mtd_unlock();				// sl2312 share pin lock
++#endif
+ 			ret = -EOPNOTSUPP;
++		}
+ 		else
+ 			ret = access_ok(VERIFY_WRITE, buf.ptr,
+ 					buf.length) ? 0 : -EFAULT;
+-		if (ret)
++		if (ret) {
++#ifdef CONFIG_SL2312_SHARE_PIN
++			mtd_unlock();				// sl2312 share pin lock
++#endif
+ 			return ret;
++		}
+ 
+ 		ops.ooblen = buf.length;
+ 		ops.ooboffs = buf.start & (mtd->oobsize - 1);
+@@ -580,7 +768,12 @@
+ 		struct erase_info_user info;
+ 
+ 		if (copy_from_user(&info, argp, sizeof(info)))
++		{
++#ifdef CONFIG_SL2312_SHARE_PIN
++			mtd_unlock();				// sl2312 share pin lock
++#endif
+ 			return -EFAULT;
++		}
+ 
+ 		if (!mtd->lock)
+ 			ret = -EOPNOTSUPP;
+@@ -594,7 +787,12 @@
+ 		struct erase_info_user info;
+ 
+ 		if (copy_from_user(&info, argp, sizeof(info)))
++		{
++#ifdef CONFIG_SL2312_SHARE_PIN
++			mtd_unlock();				// sl2312 share pin lock
++#endif
+ 			return -EFAULT;
++		}
+ 
+ 		if (!mtd->unlock)
+ 			ret = -EOPNOTSUPP;
+@@ -629,11 +827,21 @@
+ 		loff_t offs;
+ 
+ 		if (copy_from_user(&offs, argp, sizeof(loff_t)))
++		{
++#ifdef CONFIG_SL2312_SHARE_PIN
++			mtd_unlock();				// sl2312 share pin lock
++#endif
+ 			return -EFAULT;
++		}
+ 		if (!mtd->block_isbad)
+ 			ret = -EOPNOTSUPP;
+ 		else
++		{
++#ifdef CONFIG_SL2312_SHARE_PIN
++			mtd_unlock();				// sl2312 share pin lock
++#endif
+ 			return mtd->block_isbad(mtd, offs);
++		}
+ 		break;
+ 	}
+ 
+@@ -642,11 +850,21 @@
+ 		loff_t offs;
+ 
+ 		if (copy_from_user(&offs, argp, sizeof(loff_t)))
++		{
++#ifdef CONFIG_SL2312_SHARE_PIN
++			mtd_unlock();				// sl2312 share pin lock
++#endif
+ 			return -EFAULT;
++		}
+ 		if (!mtd->block_markbad)
+ 			ret = -EOPNOTSUPP;
+ 		else
++		{
++#ifdef CONFIG_SL2312_SHARE_PIN
++			mtd_unlock();				// sl2312 share pin lock
++#endif
+ 			return mtd->block_markbad(mtd, offs);
++		}
+ 		break;
+ 	}
+ 
+@@ -654,8 +872,12 @@
+ 	case OTPSELECT:
+ 	{
+ 		int mode;
+-		if (copy_from_user(&mode, argp, sizeof(int)))
++		if (copy_from_user(&mode, argp, sizeof(int))) {
++#ifdef CONFIG_SL2312_SHARE_PIN
++			mtd_unlock();				// sl2312 share pin lock
++#endif
+ 			return -EFAULT;
++		}
+ 
+ 		mfi->mode = MTD_MODE_NORMAL;
+ 
+@@ -670,7 +892,12 @@
+ 	{
+ 		struct otp_info *buf = kmalloc(4096, GFP_KERNEL);
+ 		if (!buf)
++		{
++#ifdef CONFIG_SL2312_SHARE_PIN
++			mtd_unlock();				// sl2312 share pin lock
++#endif
+ 			return -ENOMEM;
++		}
+ 		ret = -EOPNOTSUPP;
+ 		switch (mfi->mode) {
+ 		case MTD_MODE_OTP_FACTORY:
+@@ -701,12 +928,24 @@
+ 	{
+ 		struct otp_info info;
+ 
+-		if (mfi->mode != MTD_MODE_OTP_USER)
++		if (mfi->mode != MTD_MODE_OTP_USER) {
++#ifdef CONFIG_SL2312_SHARE_PIN
++			mtd_unlock();				// sl2312 share pin lock
++#endif
+ 			return -EINVAL;
+-		if (copy_from_user(&info, argp, sizeof(info)))
++		}
++		if (copy_from_user(&info, argp, sizeof(info))) {
++#ifdef CONFIG_SL2312_SHARE_PIN
++			mtd_unlock();				// sl2312 share pin lock
++#endif
+ 			return -EFAULT;
+-		if (!mtd->lock_user_prot_reg)
++		}
++		if (!mtd->lock_user_prot_reg) {
++#ifdef CONFIG_SL2312_SHARE_PIN
++			mtd_unlock();				// sl2312 share pin lock
++#endif
+ 			return -EOPNOTSUPP;
++		}
+ 		ret = mtd->lock_user_prot_reg(mtd, info.start, info.length);
+ 		break;
+ 	}
+@@ -742,8 +981,12 @@
+ 			break;
+ 
+ 		case MTD_MODE_RAW:
+-			if (!mtd->read_oob || !mtd->write_oob)
++			if (!mtd->read_oob || !mtd->write_oob) {
++#ifdef CONFIG_SL2312_SHARE_PIN
++				mtd_unlock();				// sl2312 share pin lock
++#endif
+ 				return -EOPNOTSUPP;
++			}
+ 			mfi->mode = arg;
+ 
+ 		case MTD_MODE_NORMAL:
+@@ -766,6 +1009,10 @@
+ 		ret = -ENOTTY;
+ 	}
+ 
++#ifdef CONFIG_SL2312_SHARE_PIN
++	mtd_unlock();				// sl2312 share pin lock
++#endif
++
+ 	return ret;
+ } /* memory_ioctl */
+ 
+--- a/drivers/mtd/nand/Kconfig
++++ b/drivers/mtd/nand/Kconfig
+@@ -44,6 +44,13 @@
+ 	  This enables the driver for the autronix autcpu12 board to
+ 	  access the SmartMediaCard.
+ 
++config MTD_NAND_SL2312
++	tristate "NAND Flash device on Storlink board"
++	depends on ARM && MTD_NAND && ARCH_SL2312
++	help
++	  This enables the driver for the Storlink board to
++	  access the nand device.
++
+ config MTD_NAND_EDB7312
+ 	tristate "Support for Cirrus Logic EBD7312 evaluation board"
+ 	depends on ARCH_EDB7312
+--- /dev/null
++++ b/drivers/mtd/nand/sl2312-flash-nand.c
+@@ -0,0 +1,2287 @@
++/*
++ *  drivers/mtd/sl2312.c
++ *
++ * $Id: sl2312-flash-nand.c,v 1.5 2006/06/15 07:02:29 middle Exp $
++ *
++ * Copyright (C) 2001 Toshiba Corporation
++ *
++ * 2003 (c) MontaVista Software, Inc. This file is licensed under
++ * the terms of the GNU General Public License version 2. This program
++ * is licensed "as is" without any warranty of any kind, whether express
++ * or implied.
++ *
++ */
++
++#include 
++#include 
++#include 
++#include 
++#include 
++#include 
++#include 
++#include 
++#include 
++#include 
++#include 
++#include "sl2312-flash-nand.h"
++
++
++#include 
++#include 
++#include 
++#include 
++#include 
++#include 
++
++
++/*
++ * NAND low-level MTD interface functions
++ */
++static void sl2312_nand_write_buf(struct mtd_info *mtd, const u_char *buf, int len);
++static void sl2312_nand_read_buf(struct mtd_info *mtd, u_char *buf, int len);
++static int sl2312_nand_verify_buf(struct mtd_info *mtd, const u_char *buf, int len);
++
++static int sl2312_nand_read (struct mtd_info *mtd, loff_t from, size_t len, size_t * retlen, u_char * buf);
++static int sl2312_nand_read_ecc (struct mtd_info *mtd, loff_t from, size_t len, size_t * retlen, u_char * buf, u_char * eccbuf, struct nand_oobinfo *oobsel);
++static int sl2312_nand_read_oob (struct mtd_info *mtd, loff_t from, size_t len, size_t * retlen, u_char * buf);
++static int sl2312_nand_write (struct mtd_info *mtd, loff_t to, size_t len, size_t * retlen, const u_char * buf);
++static int sl2312_nand_write_ecc (struct mtd_info *mtd, loff_t to, size_t len,
++			   size_t * retlen, const u_char * buf, u_char * eccbuf, struct nand_oobinfo *oobsel);
++static int sl2312_nand_write_oob (struct mtd_info *mtd, loff_t to, size_t len, size_t * retlen, const u_char *buf);
++static int sl2312_nand_writev (struct mtd_info *mtd, const struct kvec *vecs,
++			unsigned long count, loff_t to, size_t * retlen);
++static int sl2312_nand_writev_ecc (struct mtd_info *mtd, const struct kvec *vecs,
++			unsigned long count, loff_t to, size_t * retlen, u_char *eccbuf, struct nand_oobinfo *oobsel);
++static int sl2312_nand_erase (struct mtd_info *mtd, struct erase_info *instr, int allowbbt);
++static void sl2312_nand_sync (struct mtd_info *mtd);
++static int sl2312_nand_write_page (struct mtd_info *mtd, struct nand_chip *this, int page, u_char *oob_buf,  struct nand_oobinfo *oobsel);
++static int sl2312_nand_block_checkbad (struct mtd_info *mtd, loff_t ofs, int getchip, int allowbbt);
++static int sl2312_nand_erase_block(struct mtd_info *mtd, int page);
++
++/*
++ * MTD structure for sl2312 NDFMC
++ */
++static struct mtd_info *sl2312_mtd = NULL;
++static int nand_page=0,nand_col=0;
++
++/* Define default oob placement schemes for large and small page devices */
++static struct nand_oobinfo nand_oob_8 = {
++	.useecc = MTD_NANDECC_AUTOPLACE,
++	.eccbytes = 3,
++	.eccpos = {0, 1, 2},
++	.oobfree = { {3, 2}, {6, 2} }
++};
++
++static struct nand_oobinfo nand_oob_16 = {
++	.useecc = MTD_NANDECC_AUTOPLACE,
++	.eccbytes = 6,
++	.eccpos = {0, 1, 2, 3, 6, 7},
++	.oobfree = { {8, 8} }
++};
++
++static struct nand_oobinfo nand_oob_64 = {
++	.useecc = MTD_NANDECC_AUTOPLACE,
++	.eccbytes = 24,
++	.eccpos = {
++		40, 41, 42, 43, 44, 45, 46, 47,
++		48, 49, 50, 51, 52, 53, 54, 55,
++		56, 57, 58, 59, 60, 61, 62, 63},
++	.oobfree = { {2, 38} }
++};
++
++
++/*
++ * Define partitions for flash device
++ */
++/* the base address of FLASH control register */
++#define FLASH_CONTROL_BASE_ADDR	    (IO_ADDRESS(SL2312_FLASH_CTRL_BASE))
++#define SL2312_GLOBAL_BASE_ADDR     (IO_ADDRESS(SL2312_GLOBAL_BASE))
++//#define SL2312_FLASH_BASE_ADDR      (IO_ADDRESS(SL2312_FLASH_BASE))
++#define SL2312_FLASH_BASE_ADDR       FLASH_VADDR(SL2312_FLASH_BASE)
++static unsigned int CHIP_EN;
++/* define read/write register utility */
++//#define FLASH_READ_REG(offset)			(__raw_readl(offset+FLASH_CONTROL_BASE_ADDR))
++//#define FLASH_WRITE_REG(offset,val) 	(__raw_writel(val,offset+FLASH_CONTROL_BASE_ADDR))
++//#define FLASH_READ_DATA(offset)			(__raw_readb(offset+SL2312_FLASH_BASE_ADDR))
++//#define FLASH_WRITE_DATA(offset,val) 	(__raw_writeb(val,offset+SL2312_FLASH_BASE_ADDR))
++
++unsigned int FLASH_READ_REG(unsigned int addr)
++{
++    unsigned int *base;
++    unsigned int data;
++
++    base = (unsigned int *)(FLASH_CONTROL_BASE_ADDR + addr);
++    data = *base;
++    return (data);
++}
++
++void FLASH_WRITE_REG(unsigned int addr,unsigned int data)
++{
++    unsigned int *base;
++
++    base = (unsigned int *)(FLASH_CONTROL_BASE_ADDR + addr);
++    *base = data;
++    return;
++}
++
++unsigned int FLASH_READ_DATA(unsigned int addr)
++{
++    unsigned char *base;
++    unsigned int data;
++
++    base = (unsigned char *)(SL2312_FLASH_BASE_ADDR + addr);
++    data = *base;
++    return (data);
++}
++
++void FLASH_WRITE_DATA(unsigned int addr,unsigned int data)
++{
++    unsigned char *base;
++
++    base = (unsigned char *)(SL2312_FLASH_BASE_ADDR + addr);
++    *base = data;
++    return;
++}
++
++/* the offset of FLASH control register */
++enum NFLASH_REGISTER {
++	NFLASH_ID     			= 0x0000,
++	NFLASH_STATUS 			= 0x0008,
++	NFLASH_TYPE   			= 0x000c,
++	NFLASH_ACCESS			= 0x0030,
++	NFLASH_COUNT			= 0x0034,
++	NFLASH_CMD_ADDR 		= 0x0038,
++	NFLASH_ADDRESS			= 0x003C,
++	NFLASH_DATA				= 0x0040,
++	NFLASH_TIMING   		= 0x004C,
++	NFLASH_ECC_STATUS		= 0x0050,
++	NFLASH_ECC_CONTROL		= 0x0054,
++	NFLASH_ECC_OOB			= 0x005c,
++	NFLASH_ECC_CODE_GEN0	= 0x0060,
++	NFLASH_ECC_CODE_GEN1	= 0x0064,
++	NFLASH_ECC_CODE_GEN2	= 0x0068,
++	NFLASH_ECC_CODE_GEN3	= 0x006C,
++	NFLASH_FIFO_CONTROL		= 0x0070,
++	NFLASH_FIFO_STATUS		= 0x0074,
++	NFLASH_FIFO_ADDRESS		= 0x0078,
++	NFLASH_FIFO_DATA		= 0x007c,
++};
++
++
++
++//#define FLASH_BASE	FLASH_CONTROL_BASE_ADDR
++//#define FLASH_SIZE	0x00800000 //INTEGRATOR_FLASH_SIZE
++
++//#define FLASH_PART_SIZE 8388608
++
++//static unsigned int flash_indirect_access = 0;
++
++
++#ifdef CONFIG_SL2312_SHARE_PIN
++void sl2312flash_enable_nand_flash(void)
++{
++    unsigned int    reg_val;
++
++    reg_val = readl(SL2312_GLOBAL_BASE_ADDR + 0x30);
++    reg_val = reg_val & 0xfffffffb;
++    writel(reg_val,SL2312_GLOBAL_BASE_ADDR + 0x30);
++    return;
++}
++
++void sl2312flash_disable_nand_flash(void)
++{
++    unsigned int    reg_val;
++
++    reg_val = readl(SL2312_GLOBAL_BASE_ADDR + 0x30);
++    reg_val = reg_val | 0x00000004;
++    writel(reg_val,SL2312_GLOBAL_BASE_ADDR + 0x30);
++    return;
++}
++#endif
++
++extern struct nand_oobinfo jffs2_oobinfo;
++/*
++ * Define partitions for flash devices
++ */
++
++static struct mtd_partition sl2312_partitions[] = {
++	{ name: "RedBoot", offset: 0x00000000, size: 0x0020000, },
++	{ name: "Kernel", offset: 0x00020000, size: 0x00200000, },
++	{ name: "Ramdisk", offset: 0x00220000, size: 0x00280000, },
++	{ name: "Application", offset: 0x004A0000, size: 0x00320000, },
++	{ name: "VCTL", offset: 0x007C0000, size: 0x20000, },
++	{ name: "CurConf", offset: 0x007E0000, size: 0x20000, },
++	{ name: "FIS directory", offset: 0x007e0000, size: 0x00020000, }
++
++};
++
++
++/*
++ *	hardware specific access to control-lines
++*/
++static void sl2312_hwcontrol(struct mtd_info *mtd, int cmd)
++{
++
++	return ;
++}
++
++static int sl2312_nand_scan_bbt(struct mtd_info *mtd)
++{
++	return 0;
++}
++
++/**
++ * nand_block_isbad - [MTD Interface] Check whether the block at the given offset is bad
++ * @mtd:	MTD device structure
++ * @ofs:	offset relative to mtd start
++ */
++static int sl2312_nand_block_isbad (struct mtd_info *mtd, loff_t ofs)
++{
++	/* Check for invalid offset */
++	if (ofs > mtd->size)
++		return -EINVAL;
++
++	return sl2312_nand_block_checkbad (mtd, ofs, 1, 0);
++}
++
++/**
++ * nand_block_checkbad - [GENERIC] Check if a block is marked bad
++ * @mtd:	MTD device structure
++ * @ofs:	offset from device start
++ * @getchip:	0, if the chip is already selected
++ * @allowbbt:	1, if its allowed to access the bbt area
++ *
++ * Check, if the block is bad. Either by reading the bad block table or
++ * calling of the scan function.
++ */
++
++static int sl2312_nand_erase_block(struct mtd_info *mtd, int page)
++{
++	int opcode;
++	/* Send commands to erase a page */
++		FLASH_WRITE_REG(NFLASH_ECC_CONTROL, 0x00000000); //set 31b = 0
++
++		if(mtd->oobblock > 528)
++		    FLASH_WRITE_REG(NFLASH_COUNT, 0x7f0fff21);  // 3 address & 2 command
++		else
++		    FLASH_WRITE_REG(NFLASH_COUNT, 0x7f0fff11);  // 2 address & 2 command
++
++		FLASH_WRITE_REG(NFLASH_CMD_ADDR, 0x0000d060); // write read id command
++		FLASH_WRITE_REG(NFLASH_ADDRESS, page); //write address 0x00
++
++
++
++		/* read maker code */
++		opcode = 0x80003000|DWIDTH|CHIP_EN; //set start bit & 8bits write command
++		FLASH_WRITE_REG(NFLASH_ACCESS, opcode);
++
++		while(opcode&0x80000000) //polling flash access 31b
++      	{
++           opcode=FLASH_READ_REG(NFLASH_ACCESS);
++           //sl2312_flash_delay();
++           schedule();
++           //cond_resched();
++      	}
++}
++
++void sl2312_flash_delay(void)
++{
++      int i;
++
++      for(i=0; i<50; i++)
++           i=i;
++}
++
++static int sl2312_nand_block_checkbad (struct mtd_info *mtd, loff_t ofs, int getchip, int allowbbt)
++{
++	struct nand_chip *this = mtd->priv;
++
++	if (!this->bbt)
++		return this->block_bad(mtd, ofs, getchip);
++
++	/* Return info from the table */
++	return nand_isbad_bbt (mtd, ofs, allowbbt);
++}
++
++/**
++ * nand_block_markbad - [MTD Interface] Mark the block at the given offset as bad
++ * @mtd:	MTD device structure
++ * @ofs:	offset relative to mtd start
++ */
++static int sl2312_nand_block_markbad (struct mtd_info *mtd, loff_t ofs)
++{
++	struct nand_chip *this = mtd->priv;
++	int ret;
++
++        if ((ret = sl2312_nand_block_isbad(mtd, ofs))) {
++        	/* If it was bad already, return success and do nothing. */
++		if (ret > 0)
++			return 0;
++        	return ret;
++        }
++
++	return this->block_markbad(mtd, ofs);
++}
++
++/*
++ *	Get chip for selected access
++ */
++static inline void sl2312_nand_get_chip (struct nand_chip *this, struct mtd_info *mtd, int new_state, int *erase_state)
++{
++
++	DECLARE_WAITQUEUE (wait, current);
++
++	/*
++	 * Grab the lock and see if the device is available
++	 * For erasing, we keep the spinlock until the
++	 * erase command is written.
++	*/
++retry:
++	spin_lock_bh (&this->chip_lock);
++
++	if (this->state == FL_READY) {
++		this->state = new_state;
++		if (new_state != FL_ERASING)
++			spin_unlock_bh (&this->chip_lock);
++		return;
++	}
++
++	if (this->state == FL_ERASING) {
++		if (new_state != FL_ERASING) {
++			this->state = new_state;
++			spin_unlock_bh (&this->chip_lock);
++			this->select_chip(mtd, 0);	/* select in any case */
++			this->cmdfunc(mtd, NAND_CMD_RESET, -1, -1);
++			return;
++		}
++	}
++
++	set_current_state (TASK_UNINTERRUPTIBLE);
++	add_wait_queue (&this->wq, &wait);
++	spin_unlock_bh (&this->chip_lock);
++	schedule ();
++	remove_wait_queue (&this->wq, &wait);
++	goto retry;
++}
++
++/*
++*	read device ready pin
++*/
++static int sl2312_device_ready(struct mtd_info *mtd)
++{
++	int ready;
++
++	FLASH_WRITE_REG(NFLASH_ECC_CONTROL, 0x00000000); //set 31b = 0
++	FLASH_WRITE_REG(NFLASH_COUNT, 0x7f000070); //set only command no address and two data
++
++	FLASH_WRITE_REG(NFLASH_CMD_ADDR, 0x00000070); //write read status command
++
++
++	ready = 0x80002000|DWIDTH|CHIP_EN; //set start bit & 8bits read command
++	FLASH_WRITE_REG(NFLASH_ACCESS, ready);
++
++	while(ready&0x80000000) //polling flash access 31b
++    {
++        ready=FLASH_READ_REG(NFLASH_ACCESS);
++        //sl2312_flash_delay();
++		schedule();
++    }
++    FLASH_WRITE_REG(NFLASH_ACCESS, NFLASH_DIRECT);
++      	ready=FLASH_READ_REG(NFLASH_DATA)&0xff;
++	return ready;
++}
++void sl2312_enable_hwecc(struct mtd_info *mtd, int mode)
++{
++	/* reset first */
++	FLASH_WRITE_REG(NFLASH_ECC_CONTROL, 0x80000001); //set 31b = 0
++
++}
++
++
++void sl2312_device_setup(void)
++{
++
++}
++static u_char sl2312_nand_read_byte(struct mtd_info *mtd)
++{
++
++        unsigned int    data=0, page=0, col=0, tmp, i;
++
++        printk ("**************************sl2312_nand_read_byte !! \n");
++        //page = FLASH_READ_REG(NFLASH_ADDRESS)&0xffffff00;
++        //col  = FLASH_READ_REG(NFLASH_ADDRESS)&0x000000ff;
++        page = nand_page;
++        col  = nand_col;
++        for(i=0;i<(mtd->oobblock+mtd->oobsize);i++)
++        {
++        	if(i==col)
++				data = FLASH_READ_DATA(page*mtd->oobblock +i);
++			else
++				tmp = FLASH_READ_DATA(page*mtd->oobblock +i);
++        }
++        return data&0xff;
++}
++
++static void sl2312_nand_write_byte(struct mtd_info *mtd, u_char byte)
++{
++        //struct nand_chip *this = mtd->priv;
++        unsigned int    page=0, col=0, i;
++        u_char *databuf,oobbuf[mtd->oobsize];
++        size_t  retlen;
++        retlen=0;
++		printk ("********************sl2312_nand_write_byte !! \n");
++		page = nand_page;
++        col  = nand_col;
++		databuf = kmalloc (mtd->oobsize+mtd->oobblock,GFP_KERNEL);
++
++		if (!databuf) {
++			printk ("sl2312_nand_write_byte : Unable to allocate SL2312 NAND MTD device structure.\n");
++
++		}
++
++		 for(i=0;i<(mtd->oobblock+mtd->oobsize);i++)
++           	databuf[i] = FLASH_READ_DATA(page*mtd->oobblock +i);
++
++        databuf[col] = byte;
++        sl2312_nand_write_ecc (mtd, page, mtd->oobblock, &retlen, databuf, oobbuf, NULL);
++
++}
++
++static void sl2312_nand_write_buf(struct mtd_info *mtd, const u_char *buf, int len)
++{
++	int i, page=0,col=0;
++	struct nand_chip *this = mtd->priv;
++	u_char *databuf, *oobbuf;
++        size_t  retlen;
++        retlen=0;
++
++
++		printk ("***********************sl2312_nand_write_buf !! \n");
++		databuf = &(this->data_buf[0]);
++		oobbuf = &(this->data_buf[mtd->oobblock]);
++		for (i = 0; i < mtd->oobsize; i++)
++			oobbuf[i] = 0xff;
++
++	if(len < mtd->oobblock)
++	{
++		//addr = FLASH_READ_REG(NFLASH_ADDRESS);
++		//page = FLASH_READ_REG(NFLASH_ADDRESS)&0xffffff00;
++		//col  = FLASH_READ_REG(NFLASH_ADDRESS)&0x000000ff;
++		page = nand_page;
++        col  = nand_col;
++
++		sl2312_nand_read_ecc (mtd, page, mtd->oobblock , &retlen, databuf, oobbuf, NULL);
++
++        for(i=col;ioobblock, &retlen, databuf, oobbuf, NULL);
++
++	}
++
++}
++
++static void sl2312_nand_read_buf(struct mtd_info *mtd, u_char *buf, int len)
++{
++	int i, page=0,col=0,addr=0,tmp=0;
++	//struct nand_chip *this = mtd->priv;
++	printk ("********************sl2312_nand_read_buf !! \n");
++	if(len < mtd->oobblock)
++	{
++		//addr = FLASH_READ_REG(NFLASH_ADDRESS);
++		//page = FLASH_READ_REG(NFLASH_ADDRESS)&0xffffff00;
++		//col  = FLASH_READ_REG(NFLASH_ADDRESS)&0x000000ff;
++		page = nand_page;
++        col  = nand_col;
++		for (i=col; i<((mtd->oobblock+mtd->oobsize)-col); i++)
++		{
++			if(ipriv;
++	u_char *datatmp, *oobtmp;
++	size_t  retlen;
++	retlen=0;
++
++	datatmp = kmalloc (mtd->oobblock,GFP_KERNEL);
++	oobtmp = kmalloc (mtd->oobsize,GFP_KERNEL);
++
++	if ((!datatmp)||(!oobtmp)) {
++		printk ("sl2312_nand_verify_buf : Unable to allocate SL2312 NAND MTD device structure.\n");
++
++	}
++	//page = nand_page;
++	for(i=0;ioobblock;i++)
++		datatmp[i] = FLASH_READ_DATA(nand_page*mtd->oobblock +i);
++	/* read oobdata */
++	for (i = 0; i <  mtd->oobsize; i++)
++		oobtmp[i] = FLASH_READ_DATA(nand_page*mtd->oobblock + mtd->oobblock + i);
++
++	if(len==mtd->oobblock)
++	{
++		for (i=0; i page: %x, byte: %x \n",nand_page,i);
++				return i;
++			}
++		}
++	}
++	else if(len == mtd->oobsize)
++	{
++		for (i=0; i page: %x, byte: %x \n",nand_page,i);
++				return i;
++			}
++		}
++	}
++	else
++	{
++		printk (KERN_WARNING "sl2312_nand_verify_buf : verify length not match 0x%08x\n", len);
++		kfree(datatmp);
++		kfree(oobtmp);
++		return -1;
++	}
++
++	kfree(datatmp);
++	kfree(oobtmp);
++	return 0;
++}
++
++/*
++ * Send command to NAND device
++ */
++static void sl2312_nand_command (struct mtd_info *mtd, unsigned command, int column, int page_addr)
++{
++	register struct nand_chip *this = mtd->priv;
++	int opcode;
++
++
++	/*
++	 * program and erase have their own busy handlers
++	 * status and sequential in needs no delay
++	*/
++	switch (command) {
++
++	case NAND_CMD_PAGEPROG:
++	case NAND_CMD_ERASE1:
++	case NAND_CMD_ERASE2:
++	case NAND_CMD_SEQIN:
++	case NAND_CMD_STATUS:
++	case NAND_CMD_READ0:
++
++		/*
++		 * Write out the command to the device.
++		 */
++		if (column != -1 || page_addr != -1) {
++
++			/* Serially input address */
++			if (column != -1)
++				//FLASH_WRITE_REG(NFLASH_ADDRESS,column);
++				nand_col=column;
++
++			opcode = FLASH_READ_REG(NFLASH_ADDRESS);
++
++			if (page_addr != -1)
++				//FLASH_WRITE_REG(NFLASH_ADDRESS,opcode|(page_addr<<8));
++				nand_page = page_addr;
++
++		}
++		return;
++
++	case NAND_CMD_RESET:
++		if (this->dev_ready)
++			break;
++		FLASH_WRITE_REG(NFLASH_ECC_CONTROL, 0x00000000); //set 31b = 0
++		FLASH_WRITE_REG(NFLASH_COUNT, 0x7f0fff70); //set only command and no other data
++		FLASH_WRITE_REG(NFLASH_CMD_ADDR, NAND_CMD_RESET); //write reset command
++
++		opcode = 0x80002000|DWIDTH|CHIP_EN; //set start bit & 8bits read command
++		FLASH_WRITE_REG(NFLASH_ACCESS, opcode);
++
++		while(opcode&0x80000000) //polling flash access 31b
++      	{
++           opcode=FLASH_READ_REG(NFLASH_ACCESS);
++           //sl2312_flash_delay();
++           schedule();
++      	}
++		while ( !(sl2312_device_ready(mtd) & 0x40));
++		{
++			FLASH_WRITE_REG(NFLASH_ACCESS, NFLASH_DIRECT);
++			//sl2312_flash_delay();
++			schedule();
++			return;
++		}
++	/* This applies to read commands */
++	default:
++		/*
++		 * If we don't have access to the busy pin, we apply the given
++		 * command delay
++		*/
++		if (!this->dev_ready) {
++			udelay (this->chip_delay);
++			FLASH_WRITE_REG(NFLASH_ACCESS, NFLASH_DIRECT);
++			return;
++		}
++	}
++
++	/* wait until command is processed */
++	while (!this->dev_ready(mtd));
++
++}
++/*Add function*/
++static void nand_read_id(int chip_no, unsigned char *id)
++{
++	unsigned int opcode, i;
++
++	if(chip_no==0)
++		CHIP_EN = NFLASH_CHIP0_EN;
++	else
++		CHIP_EN = NFLASH_CHIP1_EN;
++
++	opcode = FLASH_READ_REG(NFLASH_TYPE);
++
++	FLASH_WRITE_REG(NFLASH_ECC_CONTROL, 0x00000000); //set 31b = 0
++	if((opcode&0x00000300)<=0x00000100)
++	    FLASH_WRITE_REG(NFLASH_COUNT, 0x7f000100); //set only command & address and two data
++	else
++	    FLASH_WRITE_REG(NFLASH_COUNT, 0x7f000300); //set only command & address and 4 data
++
++	FLASH_WRITE_REG(NFLASH_CMD_ADDR, 0x00000090); //write read id command
++	FLASH_WRITE_REG(NFLASH_ADDRESS, 0x00000000); //write address 0x00
++
++	/* read maker code */
++	opcode = 0x80002000|DWIDTH|CHIP_EN;//|chip0_en; //set start bit & 8bits read command
++	FLASH_WRITE_REG(NFLASH_ACCESS, opcode);
++	opcode=FLASH_READ_REG(NFLASH_ACCESS);
++		while(opcode&0x80000000) //polling flash access 31b
++      	{
++           opcode=FLASH_READ_REG(NFLASH_ACCESS);
++           //sl2312_flash_delay();
++           schedule();
++      	}
++
++    opcode = FLASH_READ_REG(NFLASH_DATA);
++    if(DWIDTH==NFLASH_WiDTH16)
++    {
++      		id[0] = opcode&0xff;
++      		id[1] = (opcode&0xff00)>>8;
++    }
++    else
++    {
++    	    id[0] = opcode&0xff;
++    	    opcode = 0x80002000|DWIDTH|CHIP_EN;//|chip0_en; //set start bit & 8bits read command
++			FLASH_WRITE_REG(NFLASH_ACCESS, opcode);
++			opcode=FLASH_READ_REG(NFLASH_ACCESS);
++			while(opcode&0x80000000) //polling flash access 31b
++    	  	{
++    	       opcode=FLASH_READ_REG(NFLASH_ACCESS);
++    	       //sl2312_flash_delay();
++    	       schedule();
++    	  	}
++    		opcode = FLASH_READ_REG(NFLASH_DATA);
++      		id[1] = (opcode&0xff00)>>8;
++
++      		opcode=FLASH_READ_REG(NFLASH_TYPE);
++      		if((opcode&0x300)>0x100)
++      		{
++      		    for(i=0;i<2;i++)
++      		    {
++      				//data cycle 3 & 4 ->not use
++      				opcode = 0x80002000|DWIDTH|CHIP_EN;//set start bit & 8bits read command
++					FLASH_WRITE_REG(NFLASH_ACCESS, opcode);
++					opcode=FLASH_READ_REG(NFLASH_ACCESS);
++      				while(opcode&0x80000000) //polling flash access 31b
++      				{
++        			   opcode=FLASH_READ_REG(NFLASH_ACCESS);
++        			   //sl2312_flash_delay();
++        			   schedule();
++      				}
++
++      				opcode=FLASH_READ_REG(NFLASH_DATA);
++      				id[2+i] = (opcode&(0xff0000<>(8*(2+i));
++      		    }
++      		}
++    }
++    FLASH_WRITE_REG(NFLASH_ACCESS, NFLASH_DIRECT);
++}
++
++/*
++ * NAND erase a block
++ */
++static int sl2312_nand_erase (struct mtd_info *mtd, struct erase_info *instr, int allowbbt)
++{
++	int page, len, status, pages_per_block, ret, chipnr;
++	struct nand_chip *this = mtd->priv;
++
++	DEBUG (MTD_DEBUG_LEVEL3,
++	       "nand_erase: start = 0x%08x, len = %i\n", (unsigned int) instr->addr, (unsigned int) instr->len);
++
++	/* Start address must align on block boundary */
++	if (instr->addr & ((1 << this->phys_erase_shift) - 1)) {
++		DEBUG (MTD_DEBUG_LEVEL0, "nand_erase: Unaligned address\n");
++		return -EINVAL;
++	}
++
++	/* Length must align on block boundary */
++	if (instr->len & ((1 << this->phys_erase_shift) - 1)) {
++		DEBUG (MTD_DEBUG_LEVEL0, "nand_erase: Length not block aligned\n");
++		return -EINVAL;
++	}
++
++	/* Do not allow erase past end of device */
++	if ((instr->len + instr->addr) > mtd->size) {
++		DEBUG (MTD_DEBUG_LEVEL0, "nand_erase: Erase past end of device\n");
++		return -EINVAL;
++	}
++
++	instr->fail_addr = 0xffffffff;
++
++	/* Grab the lock and see if the device is available */
++	sl2312_nand_get_chip (this, mtd, FL_ERASING, NULL);
++
++	/* Shift to get first page */
++	page = (int) (instr->addr >> this->page_shift);
++	chipnr = (int) (instr->addr >> this->chip_shift);
++
++	/* Calculate pages in each block */
++	pages_per_block = 1 << (this->phys_erase_shift - this->page_shift);
++
++	/* Select the NAND device */
++	//this->select_chip(mtd, chipnr);
++	this->select_chip(mtd, 0);
++
++	/* Check the WP bit */
++	/* Check, if it is write protected */
++	status = sl2312_device_ready(mtd);
++	if (!(status & 0x80)) {
++		DEBUG (MTD_DEBUG_LEVEL0, "nand_erase: Device is write protected!!!\n");
++		instr->state = MTD_ERASE_FAILED;
++		goto erase_exit;
++	}
++
++	/* Loop through the pages */
++	len = instr->len;
++
++	instr->state = MTD_ERASING;
++
++	while (len) {
++		/* Check if we have a bad block, we do not erase bad blocks ! */
++		if (this->block_bad(mtd, ((loff_t) page) << this->page_shift, 0)) {
++			printk (KERN_WARNING "nand_erase: attempt to erase a bad block at page 0x%08x\n", page);
++			//instr->state = MTD_ERASE_FAILED;
++			//goto erase_exit;
++		}
++
++		/* Invalidate the page cache, if we erase the block which contains
++		   the current cached page */
++		if (page <= this->pagebuf && this->pagebuf < (page + pages_per_block))
++			this->pagebuf = -1;
++		/////////
++
++		///* Send commands to erase a page */
++		//FLASH_WRITE_REG(NFLASH_ECC_CONTROL, 0x00000000); //set 31b = 0
++	    //
++		//if(mtd->oobblock > 528)
++		//    FLASH_WRITE_REG(NFLASH_COUNT, 0x7f0fff21);  // 3 address & 2 command
++		//else
++		//    FLASH_WRITE_REG(NFLASH_COUNT, 0x7f0fff11);  // 2 address & 2 command
++		//
++		//FLASH_WRITE_REG(NFLASH_CMD_ADDR, 0x0000d060); // write read id command
++		//FLASH_WRITE_REG(NFLASH_ADDRESS, page); //write address 0x00
++		//
++		//
++		//
++		///* read maker code */
++		//opcode = 0x80003000|DWIDTH|CHIP_EN; //set start bit & 8bits write command
++		//FLASH_WRITE_REG(NFLASH_ACCESS, opcode);
++		//
++		//while(opcode&0x80000000) //polling flash access 31b
++      	//{
++        //   opcode=FLASH_READ_REG(NFLASH_ACCESS);
++        //   //sl2312_flash_delay();
++        //   schedule();
++        //   //cond_resched();
++      	//}
++      	sl2312_nand_erase_block(mtd, page);
++      	//////////////
++		status = this->waitfunc (mtd, this, FL_ERASING);
++		/* See if block erase succeeded */
++		if (status & 0x01) {
++			DEBUG (MTD_DEBUG_LEVEL0, "nand_erase: " "Failed erase, page 0x%08x\n", page);
++			instr->state = MTD_ERASE_FAILED;
++			instr->fail_addr = (page << this->page_shift);
++			goto erase_exit;
++		}
++
++		/* Increment page address and decrement length */
++		len -= (1 << this->phys_erase_shift);
++		page += pages_per_block;
++
++		/* Check, if we cross a chip boundary */
++		if (len && !(page & this->pagemask)) {
++			chipnr++;
++			this->select_chip(mtd, 0);
++			this->select_chip(mtd, 0);
++		}
++		//sl2312_flash_delay();
++           schedule();
++           //cond_resched();
++	}
++	instr->state = MTD_ERASE_DONE;
++
++erase_exit:
++	/* De-select the NAND device */
++	this->select_chip(mtd, 0);
++	spin_unlock_bh (&this->chip_lock);
++
++	ret = instr->state == MTD_ERASE_DONE ? 0 : -EIO;;
++	/* Do call back function */
++	if (!ret && instr->callback)
++		instr->callback (instr);
++
++	/* The device is ready */
++	spin_lock_bh (&this->chip_lock);
++	this->state = FL_READY;
++	spin_unlock_bh (&this->chip_lock);
++	FLASH_WRITE_REG(NFLASH_ACCESS, NFLASH_DIRECT);
++	/* Return more or less happy */
++	return ret;
++}
++
++static void sl2312_nand_select_chip(struct mtd_info *mtd, int chip)
++{
++	//struct nand_chip *this = mtd->priv;
++
++	switch(chip) {
++	case -1:
++		CHIP_EN = NFLASH_CHIP0_EN;
++		break;
++	case 0:
++		CHIP_EN = NFLASH_CHIP0_EN;
++		break;
++	case 1:
++		CHIP_EN = NFLASH_CHIP1_EN;
++		break;
++	default:
++			CHIP_EN = NFLASH_CHIP0_EN;
++			break;
++	}
++}
++
++/**
++ * nand_default_block_markbad - [DEFAULT] mark a block bad
++ * @mtd:	MTD device structure
++ * @ofs:	offset from device start
++ *
++ * This is the default implementation, which can be overridden by
++ * a hardware specific driver.
++*/
++static int sl2312_nand_default_block_markbad(struct mtd_info *mtd, loff_t ofs)
++{
++	struct nand_chip *this = mtd->priv;
++	u_char buf[2] = {0, 0};
++	size_t	retlen;
++	int block;
++
++	/* Get block number */
++	block = ((int) ofs) >> this->bbt_erase_shift;
++	this->bbt[block >> 2] |= 0x01 << ((block & 0x03) << 1);
++
++	/* Do we have a flash based bad block table ? */
++	if (this->options & NAND_USE_FLASH_BBT)
++		return nand_update_bbt (mtd, ofs);
++
++	/* We write two bytes, so we dont have to mess with 16 bit access */
++	ofs += mtd->oobsize + (this->badblockpos & ~0x01);
++	return sl2312_nand_write_oob (mtd, ofs , 2, &retlen, buf);
++}
++
++/* Appropriate chip should already be selected */
++static int sl2312_nand_block_bad(struct mtd_info *mtd, loff_t ofs, int getchip)//(struct mtd_info *mtd, unsigned long page, )
++{
++	u_char *buf, *oobbuf;
++	size_t  retlen;
++	unsigned long page, chipnr;
++	struct nand_chip *this = mtd->priv;
++
++	if (getchip) {
++		page = (int)(ofs >> this->page_shift);
++		chipnr = (int)(ofs >> this->chip_shift);
++
++		/* Grab the lock and see if the device is available */
++		sl2312_nand_get_chip (this, mtd, FL_READING, NULL);
++		/* Select the NAND device */
++		this->select_chip(mtd, chipnr);
++	} else
++		page = (int) ofs;
++
++	buf = kmalloc (mtd->oobblock,GFP_KERNEL);
++	oobbuf = kmalloc (mtd->oobsize,GFP_KERNEL);
++
++	if ((!buf)||(!oobbuf)) {
++		printk ("sl2312_nand_block_bad : Unable to allocate SL2312 NAND MTD device structure.\n");
++
++	}
++
++	sl2312_nand_read_ecc (mtd, page, mtd->oobblock , &retlen, buf, oobbuf, NULL);
++
++
++	if(((mtd->oobblock < 528)&&(oobbuf[5] != 0xff))||((mtd->oobblock > 528)&&(oobbuf[0] != 0xff)))
++	{
++		kfree(buf);
++		kfree(oobbuf);
++		return 1;
++	}
++
++	kfree(buf);
++	kfree(oobbuf);
++	return 0;
++}
++
++/*
++*	Use NAND read ECC
++*/
++static int sl2312_nand_read (struct mtd_info *mtd, loff_t from, size_t len, size_t * retlen, u_char * buf)
++{
++	return sl2312_nand_read_ecc (mtd, from, len, retlen, buf, NULL, NULL);
++}
++
++/*
++ * NAND read with ECC
++ */
++static int sl2312_nand_read_ecc (struct mtd_info *mtd, loff_t from, size_t len,
++			  size_t * retlen, u_char * buf, u_char * oob_buf, struct nand_oobinfo *oobsel)
++{
++	int j, col, page, opcode, i;
++	int end=0;//, ecc=0;//, end_page=0;
++	int erase_state = 0;
++	int read = 0, oob = 0, ecc_failed = 0;//, ecc_status = 0
++	struct nand_chip *this = mtd->priv;
++	u_char *data_poi, *oob_data = oob_buf;
++	//u_char ecc_calc[6];
++	//u_char ecc_code[6];
++	int 	eccmode;
++	int	*oob_config;
++
++
++
++	// use chip default if zero
++	if (oobsel == NULL)
++		oobsel = &mtd->oobinfo;
++
++	eccmode = oobsel->useecc ? this->eccmode : NAND_ECC_NONE;
++	oob_config = oobsel->eccpos;
++
++	DEBUG (MTD_DEBUG_LEVEL3, "nand_read_ecc: from = 0x%08x, len = %i\n", (unsigned int) from, (int) len);
++
++	/* Do not allow reads past end of device */
++	if ((from + len) > mtd->size) {
++		DEBUG (MTD_DEBUG_LEVEL0, "nand_read_ecc: Attempt read beyond end of device\n");
++		*retlen = 0;
++		return -EINVAL;
++	}
++
++	/* Grab the lock and see if the device is available */
++	sl2312_nand_get_chip (this, mtd ,FL_READING, &erase_state);
++
++	/* Select the NAND device */
++	this->select_chip(mtd, 0);
++
++	/* First we calculate the starting page */
++	page = from >> this->page_shift;
++
++	//end_page = mtd->oobblock + mtd->oobsize;
++	end = mtd->oobblock;
++	//ecc = mtd->eccsize;
++	/* Get raw starting column */
++	col = (from & (mtd->oobblock - 1));
++
++
++	/* Send the read command */
++	//this->cmdfunc (mtd, NAND_CMD_READ0, 0x00, page);
++
++	/* Loop until all data read */
++	FLASH_WRITE_REG(NFLASH_ACCESS, NFLASH_DIRECT);
++	while (read < len) {
++
++		//udelay(1200);
++		/* If we have consequent page reads, apply delay or wait for ready/busy pin */
++		if (read) {
++			if (!this->dev_ready)
++				udelay (this->chip_delay);
++			else
++				while (!this->dev_ready(mtd));
++		}
++
++		/*
++		 * If the read is not page aligned, we have to read into data buffer
++		 * due to ecc, else we read into return buffer direct
++		 */
++		if (!col && (len - read) >= end)
++			data_poi = &buf[read];
++		else
++			data_poi = this->data_buf;
++
++		/* get oob area, if we have no oob buffer from fs-driver */
++		if (!oob_buf) {
++			oob_data = &this->data_buf[end];
++			oob = 0;
++		}
++
++		j = 0;
++		switch (eccmode) {
++			case NAND_ECC_NONE: {	/* No ECC, Read in a page */
++				FLASH_WRITE_REG(NFLASH_ECC_CONTROL, 0x0); //set 31b = 0
++				break;
++			}
++
++			case NAND_ECC_SOFT:	/* Software ECC 3/256: Read in a page + oob data */
++				break;
++
++			case NAND_ECC_HW3_256: /* Hardware ECC 3 byte /256 byte data: Read in first 256 byte, get ecc, */
++				break;
++
++			case NAND_ECC_HW3_512:
++			case NAND_ECC_HW6_512: /* Hardware ECC 3/6 byte / 512 byte data : Read in a page  */
++				FLASH_WRITE_REG(NFLASH_ECC_CONTROL, 0x80000001); //set 31b = 0
++				break;
++
++			default:
++				printk (KERN_WARNING "Invalid NAND_ECC_MODE %d\n", this->eccmode);
++				FLASH_WRITE_REG(NFLASH_ECC_CONTROL, 0x0);
++				//BUG();
++		}//end switch
++
++			for(i=0;ioobblock +i);
++			}
++			/* read oobdata */
++			for (i = 0; i <  mtd->oobsize; i++)
++			{
++				//udelay(7);
++				oob_data[oob + i] = FLASH_READ_DATA(page*mtd->oobblock +end+i);
++			}
++
++		/* Skip ECC, if not active */
++			if (eccmode == NAND_ECC_NONE)
++				goto readdata;
++
++			// compare ecc and correct data
++
++				opcode=FLASH_READ_REG(NFLASH_ECC_STATUS);
++				while(!(opcode&0x80000000)) //polling flash access 31b
++      			{
++        			   opcode=FLASH_READ_REG(NFLASH_ECC_STATUS);
++        			   //sl2312_flash_delay();
++        			   schedule();
++      			}
++      			for(j=0;j<(end/512);j++)
++      			{//for 2k page
++
++					opcode = 0x00000000|oob_data[mtd->oobsize-3-4*j]<<16|oob_data[mtd->oobsize-2-4*j]<<8|oob_data[mtd->oobsize-1-4*j];
++
++					//opcode=FLASH_READ_REG(NFLASH_ECC_CODE_GEN0+(j*4));
++
++					FLASH_WRITE_REG(NFLASH_ECC_OOB, opcode);
++					opcode = 0x00000000|(j<<8); //select ECC code generation 0
++					FLASH_WRITE_REG(NFLASH_ECC_CONTROL, opcode); //???
++
++					opcode=FLASH_READ_REG(NFLASH_ECC_STATUS);
++					if((opcode&0x00000003)==0x03)
++					{
++						printk (KERN_WARNING "\nPageRead Uncorrectable error !!\n");
++						ecc_failed++;
++					}
++					else if((opcode&0x00000003)==0x01)
++					{
++						printk (KERN_WARNING "\nPageRead One bit data error !!");
++						// correct data
++						if((data_poi[(opcode&0xff80)>>7]>>((opcode&0x38)>>3))%1)
++							data_poi[(opcode&0xff80)>>7] &= ~(1<<((opcode&0x38)>>3));
++						else
++							data_poi[(opcode&0xff80)>>7] |= (1<<((opcode&0x38)>>3));
++
++					}
++					else if((opcode&0x00000003)==0x02)
++					{
++						printk (KERN_WARNING "\nPageRead One bit ECC error !!\n");
++					}
++					else if((opcode&0x00000003)==0x00)
++					{
++
++					}
++
++				}//for 2k page
++readdata:
++		if (col || (len - read) < end) {
++			for (j = col; j < end && read < len; j++)
++				buf[read++] = data_poi[j];
++		} else
++			read += mtd->oobblock;
++		/* For subsequent reads align to page boundary. */
++		col = 0;
++		/* Increment page address */
++		page++;
++		schedule();
++	}
++	/* De-select the NAND device */
++	//this->select_chip(mtd, -1);
++	FLASH_WRITE_REG(NFLASH_ECC_CONTROL, 0x0); //set 31b = 0
++	FLASH_WRITE_REG(NFLASH_ACCESS, NFLASH_INDIRECT);
++	/* Wake up anyone waiting on the device */
++	spin_lock_bh (&this->chip_lock);
++	this->state = FL_READY;
++	wake_up (&this->wq);
++	spin_unlock_bh (&this->chip_lock);
++
++	/*
++	 * Return success, if no ECC failures, else -EIO
++	 * fs driver will take care of that, because
++	 * retlen == desired len and result == -EIO
++	 */
++	*retlen = read;
++	return ecc_failed ? -EIO : 0;
++}
++
++/*
++ * Wait for command done. This applies to erase and program only
++ * Erase can take up to 400ms and program up to 20ms according to
++ * general NAND and SmartMedia specs
++ *
++*/
++static int sl2312_nand_waitfunc(struct mtd_info *mtd, struct nand_chip *this, int state)
++{
++	unsigned long	timeo = jiffies;
++	int	status, opcode;
++
++	if (state == FL_ERASING)
++		 timeo += (HZ * 400) / 1000;
++	else
++		 timeo += (HZ * 20) / 1000;
++
++	spin_lock_bh (&this->chip_lock);
++	FLASH_WRITE_REG(NFLASH_ECC_CONTROL, 0x00000000); //set 31b = 0
++	FLASH_WRITE_REG(NFLASH_COUNT, 0x007f000070); //set only command no address and two data
++
++	FLASH_WRITE_REG(NFLASH_CMD_ADDR, 0x00000070); //write read status command
++
++
++	opcode = 0x80002000|DWIDTH|CHIP_EN; //set start bit & 8bits read command
++	FLASH_WRITE_REG(NFLASH_ACCESS, opcode);
++
++	while(opcode&0x80000000) //polling flash access 31b
++    {
++        opcode=FLASH_READ_REG(NFLASH_ACCESS);
++        //sl2312_flash_delay();
++        schedule();
++    }
++
++	while (time_before(jiffies, timeo)) {
++		/* Check, if we were interrupted */
++		if (this->state != state) {
++			spin_unlock_bh (&this->chip_lock);
++			FLASH_WRITE_REG(NFLASH_ACCESS, NFLASH_DIRECT);
++			return 0;
++		}
++		if (this->dev_ready) {
++			if (this->dev_ready(mtd))
++				break;
++		}
++		if (FLASH_READ_REG(NFLASH_DATA) & 0x40)
++			break;
++
++		spin_unlock_bh (&this->chip_lock);
++		yield ();
++		spin_lock_bh (&this->chip_lock);
++	}
++	status = FLASH_READ_REG(NFLASH_DATA)&0xff;
++	spin_unlock_bh (&this->chip_lock);
++	FLASH_WRITE_REG(NFLASH_ACCESS, NFLASH_DIRECT);
++	return status;
++}
++
++static int sl2312_nand_read_oob (struct mtd_info *mtd, loff_t from, size_t len, size_t * retlen, u_char * buf)
++{
++	int i, col, page, j=0;
++	//int erase_state = 0;
++	struct nand_chip *this = mtd->priv;
++	u_char *databuf, *oobbuf;
++
++	databuf = &this->data_buf[0];
++	oobbuf = &this->data_buf[mtd->oobblock];
++		for (i = 0; i < mtd->oobsize; i++)
++			oobbuf[i] = 0xff;
++
++	DEBUG (MTD_DEBUG_LEVEL3, "nand_read_oob: from = 0x%08x, len = %i\n", (unsigned int) from, (int) len);
++
++	/* Shift to get page */
++	page = ((int) from) >> this->page_shift;
++
++	/* Mask to get column */
++	col = from & (mtd->oobsize-1);  //0x0f;
++
++	/* Initialize return length value */
++	*retlen = 0;
++	sl2312_nand_read_ecc (mtd, page, mtd->oobblock , retlen, databuf, oobbuf, NULL);
++	for(i=col,j=0;ioobsize||i<(col+len);i++,j++)
++		buf[j] = oobbuf[i];
++
++	*retlen = j ;
++	return 0;
++}
++
++#define NOTALIGNED(x) (x & (mtd->oobblock-1)) != 0
++/*
++*	Use NAND write ECC
++*/
++static int sl2312_nand_write (struct mtd_info *mtd, loff_t to, size_t len, size_t * retlen, const u_char * buf)
++{
++	return (sl2312_nand_write_ecc (mtd, to, len, retlen, buf, NULL, NULL));
++}
++
++/*
++ * NAND write with ECC
++ */
++static int sl2312_nand_write_ecc (struct mtd_info *mtd, loff_t to, size_t len,
++			   size_t * retlen, const u_char * buf, u_char * eccbuf, struct nand_oobinfo *oobsel)
++{
++	int page, ret = 0, oob = 0, written = 0;
++	struct nand_chip *this = mtd->priv;
++
++	DEBUG (MTD_DEBUG_LEVEL3, "nand_write_ecc: to = 0x%08x, len = %i\n", (unsigned int) to, (int) len);
++
++
++	/* Do not allow write past end of device */
++	if ((to + len) > mtd->size) {
++		DEBUG (MTD_DEBUG_LEVEL0, "nand_write_ecc: Attempt to write past end of page\n");
++		return -EINVAL;
++	}
++
++	/* reject writes, which are not page aligned */
++	if (NOTALIGNED (to) || NOTALIGNED(len)) {
++		printk (KERN_NOTICE "nand_write_ecc: Attempt to write not page aligned data\n");
++		return -EINVAL;
++	}
++
++	// if oobsel is NULL, use chip defaults
++	if (oobsel == NULL)
++		oobsel = &mtd->oobinfo;
++
++	/* Shift to get page */
++	page = ((int) to) >> this->page_shift;
++
++	/* Grab the lock and see if the device is available */
++	sl2312_nand_get_chip (this, mtd, FL_WRITING, NULL);
++
++	/* Select the NAND device */
++	this->select_chip(mtd, 0);
++
++	/* Check the WP bit */
++	if (!(sl2312_device_ready(mtd) & 0x80)) {
++		DEBUG (MTD_DEBUG_LEVEL0, "nand_write_ecc: Device is write protected!!!\n");
++		ret = -EIO;
++		goto out;
++	}
++
++	/* Loop until all data is written */
++	while (written < len) {
++		//udelay(100);
++		int cnt = mtd->oobblock;
++		this->data_poi = (u_char*) &buf[written];
++		/* We use the same function for write and writev */
++		if (eccbuf) {
++			ret = sl2312_nand_write_page (mtd, this, page, &eccbuf[oob], oobsel);
++			oob += mtd->oobsize;
++		} else
++			ret = sl2312_nand_write_page (mtd, this, page, NULL, oobsel);
++
++		if (ret)
++			goto out;
++
++		/* Update written bytes count */
++		written += cnt;
++		/* Increment page address */
++		page++;
++	}
++
++out:
++	/* De-select the NAND device */
++	//this->select_chip(mtd, -1);
++
++	/* Wake up anyone waiting on the device */
++	spin_lock_bh (&this->chip_lock);
++	this->state = FL_READY;
++	wake_up (&this->wq);
++	spin_unlock_bh (&this->chip_lock);
++
++	*retlen = written;
++	return ret;
++}
++
++/*
++ *	Nand_page_program function is used for write and writev !
++ *	This function will always program a full page of data
++ *	If you call it with a non page aligned buffer, you're lost :)
++ */
++static int sl2312_nand_write_page (struct mtd_info *mtd, struct nand_chip *this, int page, u_char *oob_buf,  struct nand_oobinfo *oobsel)
++{
++	int 	i, j, status, opcode;
++	u_char	ecc_code[16], *oob_data;
++	int	eccmode = oobsel->useecc ? this->eccmode : NAND_ECC_NONE;
++	//int  	*oob_config = oobsel->eccpos;
++
++	/* pad oob area, if we have no oob buffer from fs-driver */
++	if (!oob_buf) {
++		oob_data = &this->data_buf[mtd->oobblock];
++		for (i = 0; i < mtd->oobsize; i++)
++			oob_data[i] = 0xff;
++	} else
++		oob_data = oob_buf;
++
++	/* Send command to begin auto page programming */
++
++	memset(oob_data,0xff,mtd->oobsize);
++	/* Write out complete page of data, take care of eccmode */
++	switch (eccmode) {
++	/* No ecc and software ecc 3/256, write all */
++	case NAND_ECC_NONE:
++		printk (KERN_WARNING "Writing data without ECC to NAND-FLASH is not recommended\n");
++		FLASH_WRITE_REG(NFLASH_ECC_CONTROL, 0x0); //set 31b = 0
++		break;
++	case NAND_ECC_SOFT:
++		break;
++
++	/* Hardware ecc 3 byte / 256 data, write first half, get ecc, then second, if 512 byte pagesize */
++	case NAND_ECC_HW3_256:
++		break;
++
++	/* Hardware ecc 3 byte / 512 byte data, write full page */
++	case NAND_ECC_HW3_512:
++		FLASH_WRITE_REG(NFLASH_ECC_CONTROL, 0x80000001); //set 31b = 0
++
++	/* Hardware ecc 6 byte / 512 byte data, write full page */
++	case NAND_ECC_HW6_512:
++		break;
++
++	default:
++		printk (KERN_WARNING "Invalid NAND_ECC_MODE %d\n", this->eccmode);
++		FLASH_WRITE_REG(NFLASH_ECC_CONTROL, 0x0); //set 31b = 0
++		//BUG();
++	}
++
++	FLASH_WRITE_REG(NFLASH_ACCESS, NFLASH_DIRECT);
++
++	for(i=0;ioobblock;i++)
++	{
++		//udelay(5);
++		FLASH_WRITE_DATA((page*mtd->oobblock)+i,this->data_poi[i]);
++	}
++	///////////////
++	if(eccmode!=NAND_ECC_NONE)
++	{
++		opcode=FLASH_READ_REG(NFLASH_ECC_STATUS);
++		while(!(opcode&0x80000000)) //polling flash access 31b
++    	{
++    	 	   opcode=FLASH_READ_REG(NFLASH_ECC_STATUS);
++    	 	   //sl2312_flash_delay();
++    	 	   schedule();
++    	}
++
++
++    	for(i=0;i<(mtd->oobblock/512);i++)
++    	{
++    		opcode=FLASH_READ_REG(NFLASH_ECC_CODE_GEN0+(i*4));
++
++    		for(j=3;j>0;j--)
++    		      oob_data[(mtd->oobsize-j-(i*4))] = (opcode<<((4-j)*8)) >>24;
++
++    		for(j=0;j<4;j++)
++    		{
++    			ecc_code[15-i*4] = opcode;
++    			ecc_code[15-i*4-1] = opcode>>8;
++    			ecc_code[15-i*4-2] = opcode>>16;
++    		}
++    	}
++
++    	//disable ecc
++    	FLASH_WRITE_REG(NFLASH_ECC_CONTROL, 0x00000000);
++
++    	/* Write out OOB data */
++    	for(i=0;ioobsize;i++)
++    	{
++    		//udelay(5);
++			FLASH_WRITE_DATA((page*mtd->oobblock)+mtd->oobblock+i,oob_data[i]);
++		}
++    }
++    else
++    {
++    	for(i=0;ioobsize;i++)
++    	{
++    		//udelay(5);
++			FLASH_WRITE_DATA((page*mtd->oobblock)+mtd->oobblock+i,0xff);
++		}
++    }
++
++
++	/* call wait ready function */
++	status = this->waitfunc (mtd, this, FL_WRITING);
++	FLASH_WRITE_REG(NFLASH_ECC_CONTROL, 0x0); //set 31b = 0
++	/* See if device thinks it succeeded */
++	if (status & 0x01) {
++		DEBUG (MTD_DEBUG_LEVEL0, "%s: " "Failed write, page 0x%08x, ", __FUNCTION__, page);
++		FLASH_WRITE_REG(NFLASH_ECC_CONTROL, 0x0); //set 31b = 0
++		return -EIO;
++	}
++
++#ifdef CONFIG_MTD_NAND_VERIFY_WRITE
++	/*
++	 * The NAND device assumes that it is always writing to
++	 * a cleanly erased page. Hence, it performs its internal
++	 * write verification only on bits that transitioned from
++	 * 1 to 0. The device does NOT verify the whole page on a
++	 * byte by byte basis. It is possible that the page was
++	 * not completely erased or the page is becoming unusable
++	 * due to wear. The read with ECC would catch the error
++	 * later when the ECC page check fails, but we would rather
++	 * catch it early in the page write stage. Better to write
++	 * no data than invalid data.
++	 */
++
++	/* Send command to read back the page */
++	this->cmdfunc (mtd, NAND_CMD_READ0, 0, page);
++	/* Loop through and verify the data */
++	if (this->verify_buf(mtd, this->data_poi, mtd->oobblock)) {
++		DEBUG (MTD_DEBUG_LEVEL0, "%s: " "Failed write verify, page 0x%08x ", __FUNCTION__, page);
++		return -EIO;
++	}
++
++	/* check, if we have a fs-supplied oob-buffer */
++	if (oob_buf) {
++		if (this->verify_buf(mtd, oob_data, mtd->oobsize)) {
++			DEBUG (MTD_DEBUG_LEVEL0, "%s: " "Failed write verify, page 0x%08x ", __FUNCTION__, page);
++			return -EIO;
++		}
++	} else {
++		if (eccmode != NAND_ECC_NONE) {
++			int ecc_bytes = 0;
++
++			switch (this->eccmode) {
++			case NAND_ECC_SOFT:
++			case NAND_ECC_HW3_256: ecc_bytes = (mtd->oobblock == 512) ? 6 : 3; break;
++			case NAND_ECC_HW3_512: ecc_bytes = 3; break;
++			case NAND_ECC_HW6_512: ecc_bytes = 6; break;
++			}
++
++
++
++			for(i=0;i < (mtd->oobblock+mtd->oobsize);i++)
++			{
++				if(i>=mtd->oobblock)
++					oob_data[i-mtd->oobblock] = FLASH_READ_DATA((page*mtd->oobblock) +i);
++				else
++					oob_data[0] = FLASH_READ_DATA((page*mtd->oobblock) +i);
++			}
++
++			if(this->eccmode == NAND_ECC_HW3_512)
++			{
++				for(i=0;i<(mtd->oobblock/512);i++)
++    			{
++    				for(j=0;j<3;j++)
++    				{
++    				    if (oob_data[mtd->oobsize-1-j-4*i] != ecc_code[15-j-4*i]) {
++							DEBUG (MTD_DEBUG_LEVEL0,
++							       "%s: Failed ECC write "
++						       "verify, page 0x%08x, " "%6i bytes were succesful\n", __FUNCTION__, page, i);
++							return -EIO;
++						}
++    				}
++    			}
++			}
++		}//eccmode != NAND_ECC_NONE
++	}
++	/*
++	 * Terminate the read command. This is faster than sending a reset command or
++	 * applying a 20us delay before issuing the next programm sequence.
++	 * This is not a problem for all chips, but I have found a bunch of them.
++	 */
++	//this->select_chip(mtd, -1);
++	//this->select_chip(mtd, 0);
++#endif
++
++	return 0;
++}
++
++/*
++ * NAND write with iovec
++ */
++static int sl2312_nand_writev (struct mtd_info *mtd, const struct kvec *vecs, unsigned long count,
++		loff_t to, size_t * retlen)
++{
++	return (sl2312_nand_writev_ecc (mtd, vecs, count, to, retlen, NULL, 0));
++}
++
++static int sl2312_nand_writev_ecc (struct mtd_info *mtd, const struct kvec *vecs, unsigned long count,
++		loff_t to, size_t * retlen, u_char *eccbuf, struct nand_oobinfo *oobsel)
++{
++	int i, page, len, total_len, ret = 0, written = 0;
++	struct nand_chip *this = mtd->priv;
++
++	/* Calculate total length of data */
++	total_len = 0;
++	for (i = 0; i < count; i++)
++		total_len += (int) vecs[i].iov_len;
++
++	DEBUG (MTD_DEBUG_LEVEL3,
++	       "nand_writev: to = 0x%08x, len = %i, count = %ld\n", (unsigned int) to, (unsigned int) total_len, count);
++
++	/* Do not allow write past end of page */
++	if ((to + total_len) > mtd->size) {
++		DEBUG (MTD_DEBUG_LEVEL0, "nand_writev: Attempted write past end of device\n");
++		return -EINVAL;
++	}
++
++	/* reject writes, which are not page aligned */
++	if (NOTALIGNED (to) || NOTALIGNED(total_len)) {
++		printk (KERN_NOTICE "nand_write_ecc: Attempt to write not page aligned data\n");
++		return -EINVAL;
++	}
++
++	// if oobsel is NULL, use chip defaults
++	if (oobsel == NULL)
++		oobsel = &mtd->oobinfo;
++
++	/* Shift to get page */
++	page = ((int) to) >> this->page_shift;
++
++	/* Grab the lock and see if the device is available */
++	sl2312_nand_get_chip (this, mtd, FL_WRITING, NULL);
++
++	/* Select the NAND device */
++	this->select_chip(mtd, 0);
++
++	/* Check the WP bit */
++	if (!(sl2312_device_ready(mtd) & 0x80)) {
++		DEBUG (MTD_DEBUG_LEVEL0, "sl2312_nand_writev_ecc: Device is write protected!!!\n");
++		ret = -EIO;
++		goto out;
++	}
++
++	/* Loop until all iovecs' data has been written */
++	len = 0;
++	while (count) {
++		/*
++		 *  Check, if the tuple gives us not enough data for a
++		 *  full page write. Then we can use the iov direct,
++		 *  else we have to copy into data_buf.
++		 */
++		if ((vecs->iov_len - len) >= mtd->oobblock) {
++			this->data_poi = (u_char *) vecs->iov_base;
++			this->data_poi += len;
++			len += mtd->oobblock;
++			/* Check, if we have to switch to the next tuple */
++			if (len >= (int) vecs->iov_len) {
++				vecs++;
++				len = 0;
++				count--;
++			}
++		} else {
++			/*
++			 * Read data out of each tuple until we have a full page
++			 * to write or we've read all the tuples.
++		 	*/
++			int cnt = 0;
++			while ((cnt < mtd->oobblock) && count) {
++				if (vecs->iov_base != NULL && vecs->iov_len) {
++					this->data_buf[cnt++] = ((u_char *) vecs->iov_base)[len++];
++				}
++				/* Check, if we have to switch to the next tuple */
++				if (len >= (int) vecs->iov_len) {
++					vecs++;
++					len = 0;
++					count--;
++				}
++			}
++			this->data_poi = this->data_buf;
++		}
++
++		/* We use the same function for write and writev !) */
++		ret = sl2312_nand_write_page (mtd, this, page, NULL, oobsel);
++		if (ret)
++			goto out;
++
++		/* Update written bytes count */
++		written += mtd->oobblock;;
++
++		/* Increment page address */
++		page++;
++	}
++
++out:
++	/* De-select the NAND device */
++	//this->select_chip(mtd, -1);
++
++	/* Wake up anyone waiting on the device */
++	spin_lock_bh (&this->chip_lock);
++	this->state = FL_READY;
++	wake_up (&this->wq);
++	spin_unlock_bh (&this->chip_lock);
++
++	*retlen = written;
++	return ret;
++}
++
++/*
++static u_char ffchars[] = {
++	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
++	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff
++};
++*/
++/*
++ * NAND write out-of-band
++ */
++static int sl2312_nand_write_oob (struct mtd_info *mtd, loff_t to, size_t len, size_t * retlen, const u_char * buf)
++{
++	int column, page, status, ret = 0, j=0;
++	struct nand_chip *this = mtd->priv;
++	u_char *databuf, *oobbuf;
++
++
++		databuf = &this->data_buf[0];
++		oobbuf = &this->data_buf[mtd->oobblock];
++		for (j = 0; j < mtd->oobsize; j++)
++			oobbuf[j] = 0xff;
++//#ifdef CONFIG_MTD_NAND_VERIFY_WRITE
++//	int 	i;
++//#endif
++
++	DEBUG (MTD_DEBUG_LEVEL3, "nand_write_oob: to = 0x%08x, len = %i\n", (unsigned int) to, (int) len);
++
++	/* Shift to get page */
++	page = ((int) to) >> this->page_shift;
++
++	/* Mask to get column */
++	column = to & 0x1f;
++
++	/* Initialize return length value */
++	*retlen = 0;
++
++	/* Do not allow write past end of page */
++	if ((column + len) > mtd->oobsize) {
++		DEBUG (MTD_DEBUG_LEVEL0, "nand_write_oob: Attempt to write past end of page\n");
++		return -EINVAL;
++	}
++
++	/* Grab the lock and see if the device is available */
++	sl2312_nand_get_chip (this, mtd, FL_WRITING, NULL);
++
++	/* Select the NAND device */
++	this->select_chip(mtd, 0);
++
++	/* Reset the chip. Some chips (like the Toshiba TC5832DC found
++	   in one of my DiskOnChip 2000 test units) will clear the whole
++	   data page too if we don't do this. I have no clue why, but
++	   I seem to have 'fixed' it in the doc2000 driver in
++	   August 1999.  dwmw2. */
++	this->cmdfunc(mtd, NAND_CMD_RESET, -1, -1);
++
++	/* Check the WP bit */
++	if (!(sl2312_device_ready(mtd) & 0x80)) {
++		DEBUG (MTD_DEBUG_LEVEL0, "nand_write_oob: Device is write protected!!!\n");
++		ret = -EIO;
++		goto out;
++	}
++	/* Write out desired data */
++	this->cmdfunc (mtd, NAND_CMD_SEQIN, mtd->oobblock, page);
++
++	sl2312_nand_read_ecc (mtd, page, mtd->oobblock , retlen, databuf, oobbuf, NULL);
++
++    for(j=column;j<(column+len);j++)
++    	oobbuf[j] = buf[j-column];
++    sl2312_nand_write_ecc (mtd, page, mtd->oobblock, retlen, databuf, oobbuf, NULL);
++
++	status = this->waitfunc (mtd, this, FL_WRITING);
++
++	/* See if device thinks it succeeded */
++	if (status & 0x01) {
++		DEBUG (MTD_DEBUG_LEVEL0, "nand_write_oob: " "Failed write, page 0x%08x\n", page);
++		ret = -EIO;
++		goto out;
++	}
++	/* Return happy */
++	*retlen = len;
++
++
++out:
++	/* De-select the NAND device */
++	//this->select_chip(mtd, -1);
++
++	/* Wake up anyone waiting on the device */
++	spin_lock_bh (&this->chip_lock);
++	this->state = FL_READY;
++	wake_up (&this->wq);
++	spin_unlock_bh (&this->chip_lock);
++
++	return ret;
++}
++
++/*
++ * NAND sync
++ */
++static void sl2312_nand_sync (struct mtd_info *mtd)
++{
++	struct nand_chip *this = mtd->priv;
++	DECLARE_WAITQUEUE (wait, current);
++
++	DEBUG (MTD_DEBUG_LEVEL3, "nand_sync: called\n");
++
++retry:
++	/* Grab the spinlock */
++	spin_lock_bh (&this->chip_lock);
++
++	/* See what's going on */
++	switch (this->state) {
++	case FL_READY:
++	case FL_SYNCING:
++		this->state = FL_SYNCING;
++		spin_unlock_bh (&this->chip_lock);
++		break;
++
++	default:
++		/* Not an idle state */
++		add_wait_queue (&this->wq, &wait);
++		spin_unlock_bh (&this->chip_lock);
++		schedule ();
++
++		remove_wait_queue (&this->wq, &wait);
++		goto retry;
++	}
++
++	/* Lock the device */
++	spin_lock_bh (&this->chip_lock);
++
++	/* Set the device to be ready again */
++	if (this->state == FL_SYNCING) {
++		this->state = FL_READY;
++		wake_up (&this->wq);
++	}
++
++	/* Unlock the device */
++	spin_unlock_bh (&this->chip_lock);
++}
++
++
++/*
++ * Scan for the NAND device
++ */
++int sl2312_nand_scan (struct mtd_info *mtd, int maxchips)
++{
++	int i, j, nand_maf_id, nand_dev_id, busw;
++	struct nand_chip *this = mtd->priv;
++	unsigned char id[4];
++
++	/* Get buswidth to select the correct functions*/
++	busw = this->options & NAND_BUSWIDTH_16;
++
++	/* check for proper chip_delay setup, set 20us if not */
++	if (!this->chip_delay)
++		this->chip_delay = 20;
++
++	/* check, if a user supplied command function given */
++	if (this->cmdfunc == NULL)
++		this->cmdfunc = sl2312_nand_command;
++
++	/* check, if a user supplied wait function given */
++	if (this->waitfunc == NULL)
++		this->waitfunc = sl2312_nand_waitfunc;
++
++	if (!this->select_chip)
++		this->select_chip = sl2312_nand_select_chip;
++	if (!this->write_byte)
++		this->write_byte = sl2312_nand_write_byte; //busw ? nand_write_byte16 : nand_write_byte;
++	if (!this->read_byte)
++		this->read_byte = sl2312_nand_read_byte; //busw ? nand_read_byte16 : nand_read_byte;
++//	if (!this->write_word)
++//		this->write_word = nand_write_word;
++//	if (!this->read_word)
++//		this->read_word = nand_read_word;
++//	if (!this->block_bad)
++		this->block_bad = sl2312_nand_block_bad; //nand_block_bad;
++	if (!this->block_markbad)
++		this->block_markbad = sl2312_nand_default_block_markbad;
++	if (!this->write_buf)
++		this->write_buf = sl2312_nand_write_buf; //busw ? nand_write_buf16 : nand_write_buf;
++	if (!this->read_buf)
++		this->read_buf = sl2312_nand_read_buf; //busw ? nand_read_buf16 : nand_read_buf;
++	if (!this->verify_buf)
++		this->verify_buf = sl2312_nand_verify_buf; //busw ? nand_verify_buf16 : nand_verify_buf;
++	if (!this->scan_bbt)
++		this->scan_bbt = sl2312_nand_scan_bbt;
++
++	/* Select the device */
++	this->select_chip(mtd, 0);
++
++	/* Read manufacturer and device IDs */
++	nand_read_id(0,id);
++
++	nand_maf_id = id[0];
++	nand_dev_id = id[1];
++
++	/* Print and store flash device information */
++	for (i = 0; nand_flash_ids[i].name != NULL; i++) {
++
++		if (nand_dev_id != nand_flash_ids[i].id)
++			continue;
++
++		if (!mtd->name) mtd->name = nand_flash_ids[i].name;
++		this->chipsize = nand_flash_ids[i].chipsize << 20;
++
++		/* New devices have all the information in additional id bytes */
++		if (!nand_flash_ids[i].pagesize) {
++			int extid;
++
++			/* The 4th id byte is the important one */
++			extid = id[3];
++			/* Calc pagesize */
++			mtd->oobblock = 1024 << (extid & 0x3);
++			extid >>= 2;
++			/* Calc oobsize */
++			mtd->oobsize = (8 << (extid & 0x03)) * (mtd->oobblock / 512);
++			extid >>= 2;
++			/* Calc blocksize. Blocksize is multiples of 64KiB */
++			mtd->erasesize = (64 * 1024)  << (extid & 0x03);
++			extid >>= 2;
++			/* Get buswidth information */
++			busw = (extid & 0x01) ? NAND_BUSWIDTH_16 : 0;
++
++		} else {
++			/* Old devices have this data hardcoded in the
++			 * device id table */
++			mtd->erasesize = nand_flash_ids[i].erasesize;
++			mtd->oobblock = nand_flash_ids[i].pagesize;
++			mtd->oobsize = mtd->oobblock / 32;
++			busw = nand_flash_ids[i].options & NAND_BUSWIDTH_16;
++		}
++
++		/* Check, if buswidth is correct. Hardware drivers should set
++		 * this correct ! */
++		if (busw != (this->options & NAND_BUSWIDTH_16)) {
++			printk (KERN_INFO "NAND device: Manufacturer ID:"
++				" 0x%02x, Chip ID: 0x%02x (%s %s)\n", nand_maf_id, nand_dev_id,
++				nand_manuf_ids[i].name , mtd->name);
++			printk (KERN_WARNING
++				"NAND bus width %d instead %d bit\n",
++					(this->options & NAND_BUSWIDTH_16) ? 16 : 8,
++					busw ? 16 : 8);
++			this->select_chip(mtd, -1);
++			return 1;
++		}
++
++		/* Calculate the address shift from the page size */
++		this->page_shift = ffs(mtd->oobblock) - 1;
++		this->bbt_erase_shift = this->phys_erase_shift = ffs(mtd->erasesize) - 1;
++		this->chip_shift = ffs(this->chipsize) - 1;
++
++		/* Set the bad block position */
++		this->badblockpos = mtd->oobblock > 512 ?
++			NAND_LARGE_BADBLOCK_POS : NAND_SMALL_BADBLOCK_POS;
++
++		/* Get chip options, preserve non chip based options */
++		this->options &= ~NAND_CHIPOPTIONS_MSK;
++		this->options |= nand_flash_ids[i].options & NAND_CHIPOPTIONS_MSK;
++		/* Set this as a default. Board drivers can override it, if neccecary */
++		this->options |= NAND_NO_AUTOINCR;
++		/* Check if this is a not a samsung device. Do not clear the options
++		 * for chips which are not having an extended id.
++		 */
++		if (nand_maf_id != NAND_MFR_SAMSUNG && !nand_flash_ids[i].pagesize)
++			this->options &= ~NAND_SAMSUNG_LP_OPTIONS;
++
++		/* Check for AND chips with 4 page planes */
++	//	if (this->options & NAND_4PAGE_ARRAY)
++	//		this->erase_cmd = multi_erase_cmd;
++	//	else
++	//		this->erase_cmd = single_erase_cmd;
++
++		/* Do not replace user supplied command function ! */
++	//	if (mtd->oobblock > 512 && this->cmdfunc == nand_command)
++	//		this->cmdfunc = nand_command_lp;
++
++		/* Try to identify manufacturer */
++		for (j = 0; nand_manuf_ids[j].id != 0x0; j++) {
++			if (nand_manuf_ids[j].id == nand_maf_id)
++				break;
++		}
++		printk (KERN_INFO "NAND device: Manufacturer ID:"
++			" 0x%02x, Chip ID: 0x%02x (%s %s)\n", nand_maf_id, nand_dev_id,
++			nand_manuf_ids[j].name , nand_flash_ids[i].name);
++		break;
++	}
++	/////////////////////////////
++
++	for (i=1; i < maxchips; i++) {
++		this->select_chip(mtd, i);
++
++		/* Send the command for reading device ID */
++		nand_read_id(1,id);
++
++		/* Read manufacturer and device IDs */
++		if (nand_maf_id != id[0] ||
++		    nand_dev_id != id[1])
++			break;
++	}
++	if (i > 1)
++		printk(KERN_INFO "%d NAND chips detected\n", i);
++
++	/* Allocate buffers, if neccecary */
++	if (!this->oob_buf) {
++		size_t len;
++		len = mtd->oobsize << (this->phys_erase_shift - this->page_shift);
++		this->oob_buf = kmalloc (len, GFP_KERNEL);
++		if (!this->oob_buf) {
++			printk (KERN_ERR "nand_scan(): Cannot allocate oob_buf\n");
++			return -ENOMEM;
++		}
++		this->options |= NAND_OOBBUF_ALLOC;
++	}
++
++	if (!this->data_buf) {
++		size_t len;
++		len = mtd->oobblock + mtd->oobsize;
++		this->data_buf = kmalloc (len, GFP_KERNEL);
++		if (!this->data_buf) {
++			if (this->options & NAND_OOBBUF_ALLOC)
++				kfree (this->oob_buf);
++			printk (KERN_ERR "nand_scan(): Cannot allocate data_buf\n");
++			return -ENOMEM;
++		}
++		this->options |= NAND_DATABUF_ALLOC;
++	}
++
++	/* Store the number of chips and calc total size for mtd */
++	this->numchips = i;
++	mtd->size = i * this->chipsize;
++	/* Convert chipsize to number of pages per chip -1. */
++	this->pagemask = (this->chipsize >> this->page_shift) - 1;
++	/* Preset the internal oob buffer */
++	memset(this->oob_buf, 0xff, mtd->oobsize << (this->phys_erase_shift - this->page_shift));
++
++	/* If no default placement scheme is given, select an
++	 * appropriate one */
++	if (!this->autooob) {
++		/* Select the appropriate default oob placement scheme for
++		 * placement agnostic filesystems */
++		switch (mtd->oobsize) {
++		case 8:
++			this->autooob = &nand_oob_8;
++			break;
++		case 16:
++			this->autooob = &nand_oob_16;
++			break;
++		case 64:
++			this->autooob = &nand_oob_64;
++			break;
++		default:
++			printk (KERN_WARNING "No oob scheme defined for oobsize %d\n",
++				mtd->oobsize);
++			BUG();
++		}
++	}
++
++	/* The number of bytes available for the filesystem to place fs dependend
++	 * oob data */
++	if (this->options & NAND_BUSWIDTH_16) {
++		mtd->oobavail = mtd->oobsize - (this->autooob->eccbytes + 2);
++		if (this->autooob->eccbytes & 0x01)
++			mtd->oobavail--;
++	} else
++		mtd->oobavail = mtd->oobsize - (this->autooob->eccbytes + 1);
++
++
++	/*
++	 * check ECC mode, default to software
++	 * if 3byte/512byte hardware ECC is selected and we have 256 byte pagesize
++	 * fallback to software ECC
++	*/
++	this->eccsize = 256;	/* set default eccsize */
++	this->eccbytes = 3;
++
++	switch (this->eccmode) {
++	case NAND_ECC_HW12_2048:
++		if (mtd->oobblock < 2048) {
++			printk(KERN_WARNING "2048 byte HW ECC not possible on %d byte page size, fallback to SW ECC\n",
++			       mtd->oobblock);
++			this->eccmode = NAND_ECC_SOFT;
++			this->calculate_ecc = nand_calculate_ecc;
++			this->correct_data = nand_correct_data;
++		} else
++			this->eccsize = 2048;
++		break;
++
++	case NAND_ECC_HW3_512:
++	case NAND_ECC_HW6_512:
++	case NAND_ECC_HW8_512:
++		if (mtd->oobblock == 256) {
++			printk (KERN_WARNING "512 byte HW ECC not possible on 256 Byte pagesize, fallback to SW ECC \n");
++			this->eccmode = NAND_ECC_SOFT;
++			this->calculate_ecc = nand_calculate_ecc;
++			this->correct_data = nand_correct_data;
++		} else
++			this->eccsize = 512; /* set eccsize to 512 */
++		break;
++
++	case NAND_ECC_HW3_256:
++		break;
++
++	case NAND_ECC_NONE:
++		printk (KERN_WARNING "NAND_ECC_NONE selected by board driver. This is not recommended !!\n");
++		this->eccmode = NAND_ECC_NONE;
++		break;
++
++	case NAND_ECC_SOFT:
++		this->calculate_ecc = nand_calculate_ecc;
++		this->correct_data = nand_correct_data;
++		break;
++
++	default:
++		printk (KERN_WARNING "Invalid NAND_ECC_MODE %d\n", this->eccmode);
++		BUG();
++	}
++
++	/* Check hardware ecc function availability and adjust number of ecc bytes per
++	 * calculation step
++	*/
++	switch (this->eccmode) {
++	case NAND_ECC_HW12_2048:
++		this->eccbytes += 4;
++	case NAND_ECC_HW8_512:
++		this->eccbytes += 2;
++	case NAND_ECC_HW6_512:
++		this->eccbytes += 3;
++//	case NAND_ECC_HW3_512:
++	case NAND_ECC_HW3_256:
++		if (this->calculate_ecc && this->correct_data && this->enable_hwecc)
++			break;
++		printk (KERN_WARNING "No ECC functions supplied, Hardware ECC not possible\n");
++		BUG();
++	}
++
++	mtd->eccsize = this->eccsize;
++
++	/* Set the number of read / write steps for one page to ensure ECC generation */
++	switch (this->eccmode) {
++	case NAND_ECC_HW12_2048:
++		this->eccsteps = mtd->oobblock / 2048;
++		break;
++	case NAND_ECC_HW3_512:
++	case NAND_ECC_HW6_512:
++	case NAND_ECC_HW8_512:
++		this->eccsteps = mtd->oobblock / 512;
++		break;
++	case NAND_ECC_HW3_256:
++	case NAND_ECC_SOFT:
++		this->eccsteps = mtd->oobblock / 256;
++		break;
++
++	case NAND_ECC_NONE:
++		this->eccsteps = 1;
++		break;
++	}
++
++	/* Initialize state, waitqueue and spinlock */
++	this->state = FL_READY;
++	init_waitqueue_head (&this->wq);
++	spin_lock_init (&this->chip_lock);
++
++	/* De-select the device */
++	this->select_chip(mtd, 0);
++
++	/* Print warning message for no device */
++	if (!mtd->size) {
++		printk (KERN_WARNING "No NAND device found!!!\n");
++		return 1;
++	}
++
++	/* Fill in remaining MTD driver data */
++	mtd->type = MTD_NANDFLASH;
++	mtd->flags = MTD_CAP_NANDFLASH | MTD_ECC;
++	mtd->ecctype = MTD_ECC_SW;
++	mtd->erase = sl2312_nand_erase;
++	mtd->point = NULL;
++	mtd->unpoint = NULL;
++	mtd->read = sl2312_nand_read;
++	mtd->write = sl2312_nand_write;
++	mtd->read_ecc = sl2312_nand_read_ecc;
++	mtd->write_ecc = sl2312_nand_write_ecc;
++	mtd->read_oob = sl2312_nand_read_oob;
++	mtd->write_oob = sl2312_nand_write_oob;
++	mtd->readv = NULL;
++	mtd->writev = sl2312_nand_writev;
++	mtd->writev_ecc = sl2312_nand_writev_ecc;
++	mtd->sync = sl2312_nand_sync;
++	mtd->lock = NULL;
++	mtd->unlock = NULL;
++	mtd->suspend = NULL;
++	mtd->resume = NULL;
++	mtd->block_isbad = sl2312_nand_block_isbad;
++	mtd->block_markbad = sl2312_nand_block_markbad;
++
++	/* and make the autooob the default one */
++	memcpy(&mtd->oobinfo, this->autooob, sizeof(mtd->oobinfo));
++
++	mtd->owner = THIS_MODULE;
++
++	/* Build bad block table */
++	return this->scan_bbt (mtd);
++}
++
++/*End Add function*/
++
++/*
++ * Main initialization routine
++ */
++extern int nand_correct_data(struct mtd_info *mtd, u_char *dat, u_char *read_ecc, u_char *calc_ecc);
++
++int __init sl2312_mtd_init (void)
++{
++	struct nand_chip *this;
++	int err = 0;
++	struct mtd_partition *parts;
++	int nr_parts = 0;
++	int ret, data, *base;
++
++	printk("NAND MTD Driver Start Init ......\n");
++
++    	base = (unsigned int *)(IO_ADDRESS(SL2312_GLOBAL_BASE) + 0x30);
++    	data = *base;
++    	data&=0xffffffeb;
++    	data|=0x3; //disable p & s flash
++        *base = data;
++
++	/* Allocate memory for MTD device structure and private data */
++	sl2312_mtd = kmalloc(sizeof(struct mtd_info) + sizeof(struct nand_chip), GFP_KERNEL);
++	if (!sl2312_mtd) {
++		printk ("Unable to allocate SL2312 NAND MTD device structure.\n");
++		err = -ENOMEM;
++		goto out;
++	}
++
++      //  sl2312_device_setup();
++
++	/* io is indirect via a register so don't need to ioremap address */
++
++	/* Get pointer to private data */
++	this = (struct nand_chip *) (&sl2312_mtd[1]);
++
++	/* Initialize structures */
++	memset((char *) sl2312_mtd, 0, sizeof(struct mtd_info));
++	memset((char *) this, 0, sizeof(struct nand_chip));
++
++	/* Link the private data with the MTD structure */
++	sl2312_mtd->priv = this;
++	sl2312_mtd->name = "sl2312-nand";
++
++	/* Set address of NAND IO lines */
++	this->IO_ADDR_R = (void __iomem *)IO_ADDRESS((SL2312_FLASH_CTRL_BASE+NFLASH_DATA)); //(unsigned long)&(sl2312_ndfmcptr->dtr);
++	this->IO_ADDR_W = (void __iomem *)IO_ADDRESS((SL2312_FLASH_CTRL_BASE+NFLASH_DATA)); //(unsigned long)&(sl2312_ndfmcptr->dtr);
++	this->read_byte = sl2312_nand_read_byte;
++    this->write_byte = sl2312_nand_write_byte;
++    this->write_buf = sl2312_nand_write_buf;
++	this->read_buf = sl2312_nand_read_buf;
++	this->verify_buf = sl2312_nand_verify_buf;
++	this->select_chip = sl2312_nand_select_chip;
++	this->block_bad = sl2312_nand_block_bad;
++	this->hwcontrol = sl2312_hwcontrol;
++	this->dev_ready = sl2312_device_ready;
++	this->cmdfunc = sl2312_nand_command;
++	this->waitfunc = sl2312_nand_waitfunc;
++	//this->calculate_ecc = sl2312_readecc;
++	this->enable_hwecc = sl2312_enable_hwecc;
++	this->eccmode = NAND_ECC_HW3_512;
++	/*this->eccsize = 512;	*/
++	/* 20 us command delay time */
++	this->chip_delay = 20;
++
++	this->correct_data = nand_correct_data;
++//	this->scan_bbt = sl2312_nand_scan_bbt;
++
++	/* Allocate memory for internal data buffer */
++	this->data_buf = kmalloc (sizeof(u_char) * (sl2312_mtd->oobblock + sl2312_mtd->oobsize), GFP_KERNEL);
++	if (!this->data_buf) {
++		printk ("Unable to allocate NAND data buffer.\n");
++		err = -ENOMEM;
++		goto out_ior;
++	}
++
++	/* Scan to find existance of the device */
++	if (sl2312_nand_scan(sl2312_mtd, 1)) {
++		err = -ENXIO;
++		goto out_ior;
++	}
++
++	/* Register the partitions */
++	parts = sl2312_partitions;
++	nr_parts = sizeof(sl2312_partitions)/sizeof(*parts);
++
++	ret = add_mtd_partitions(sl2312_mtd, sl2312_partitions, nr_parts);
++	/*If we got an error, free all resources.*/
++	if (ret < 0) {
++		del_mtd_partitions(sl2312_mtd);
++		map_destroy(sl2312_mtd);
++	}
++	goto out;
++
++//out_buf:
++//	kfree (this->data_buf);
++out_ior:
++out:
++	printk("NAND MTD Driver Init Success ......\n");
++	return err;
++}
++
++module_init(sl2312_mtd_init);
++
++/*
++ * Clean up routine
++ */
++#ifdef MODULE
++static void __exit sl2312_cleanup (void)
++{
++	struct nand_chip *this = (struct nand_chip *) &sl2312_mtd[1];
++
++	/* Unregister partitions */
++	del_mtd_partitions(sl2312_mtd);
++
++	/* Unregister the device */
++	del_mtd_device (sl2312_mtd);
++
++	/* Free internal data buffers */
++	kfree (this->data_buf);
++
++	/* Free the MTD device structure */
++	kfree (sl2312_mtd);
++}
++module_exit(sl2312_cleanup);
++#endif
++
++MODULE_LICENSE("GPL");
++MODULE_AUTHOR("Alice Hennessy ");
++MODULE_DESCRIPTION("Glue layer for SmartMediaCard on Toshiba RBsl2312");
+--- /dev/null
++++ b/drivers/mtd/nand/sl2312-flash-nand.h
+@@ -0,0 +1,24 @@
++#ifndef SL2312_FLASH_NAND_H
++#define SL2312_FLASH_NAND_H
++
++#include 
++#include 
++
++/*Add function*/
++static void nand_read_id(int chip_no,unsigned char *id);
++
++
++
++#define	NFLASH_WiDTH8              0x00000000
++#define	NFLASH_WiDTH16             0x00000400
++#define	NFLASH_WiDTH32             0x00000800
++#define NFLASH_CHIP0_EN            0x00000000  // 16th bit = 0
++#define NFLASH_CHIP1_EN            0x00010000  // 16th bit = 1
++#define	NFLASH_DIRECT              0x00004000
++#define	NFLASH_INDIRECT            0x00000000
++
++
++#define	DWIDTH             NFLASH_WiDTH8
++
++
++#endif /* SL2312_FLASH_NAND_H */
+--- /dev/null
++++ b/include/linux/mtd/kvctl.h
+@@ -0,0 +1,40 @@
++#ifndef KVCTL_H
++#define KVCTL_H
++
++#define VCTL_HEAD_SIZE	8
++#define VCTL_ENTRY_LEN	20
++
++typedef struct
++{
++  char header[4];
++  unsigned int entry_num;
++} vctl_mheader;
++
++typedef struct
++{
++  char header[4];
++  unsigned int size;
++  unsigned int type;
++  char majorver[4];
++  char minorver[4];
++  unsigned char *payload;
++} vctl_entry;
++
++typedef struct
++{
++  unsigned char mac[6];
++  unsigned char vlanid;
++  unsigned char vlanmap;
++} vlaninfo;
++
++#define VCT_VENDORSPEC		0
++#define VCT_BOOTLOADER		1
++#define VCT_KERNEL		2
++#define VCT_VERCTL		3
++#define VCT_CURRCONF		4
++#define VCT_DEFAULTCONF		5
++#define VCT_ROOTFS		6
++#define VCT_APP			7
++#define VCT_VLAN		8
++
++#endif
+--- a/drivers/mtd/maps/Makefile
++++ b/drivers/mtd/maps/Makefile
+@@ -71,3 +71,7 @@
+ obj-$(CONFIG_MTD_OMAP_NOR)	+= omap_nor.o
+ obj-$(CONFIG_MTD_MTX1)		+= mtx-1_flash.o
+ obj-$(CONFIG_MTD_TQM834x)	+= tqm834x.o
++###### for Storlink Soc #######
++obj-$(CONFIG_MTD_SL2312_CFI) += sl2312-flash-cfi.o
++obj-$(CONFIG_MTD_SL2312_SERIAL_ATMEL) += sl2312-flash-atmel.o
++obj-$(CONFIG_MTD_SL2312_SERIAL_ST) += sl2312-flash-m25p80.o
diff --git a/target/linux/storm/patches/008-serial.patch b/target/linux/storm/patches/008-serial.patch
new file mode 100644
index 0000000000..b7009af251
--- /dev/null
+++ b/target/linux/storm/patches/008-serial.patch
@@ -0,0 +1,2809 @@
+--- /dev/null
++++ b/drivers/serial/it8712.c
+@@ -0,0 +1,858 @@
++/*
++ *  linux/drivers/char/serial_uart00.c
++ *
++ *  Driver for UART00 serial ports
++ *
++ *  Based on drivers/char/serial_amba.c, by ARM Limited &
++ *                                          Deep Blue Solutions Ltd.
++ *  Copyright 2001 Altera Corporation
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
++ *
++ *  $Id: it8712.c,v 1.2 2006/06/06 06:36:04 middle Exp $
++ *
++ */
++#include 
++#include 
++#include 
++#include 
++#include 
++#include 
++#include 
++#include 
++#include 
++#include 
++#include 
++#include 
++#include 
++#include 
++
++#if defined(CONFIG_SERIAL_IT8712_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
++#define SUPPORT_SYSRQ
++#endif
++
++#include 
++#include 
++#include 
++#include 
++#include "it8712.h"
++
++//#define DEBUG           1
++#define UART_NR		1
++
++#define SERIAL_IT8712_NAME	"ttySI"
++#define SERIAL_IT8712_MAJOR	204
++#define SERIAL_IT8712_MINOR	41      /* Temporary - will change in future */
++#define SERIAL_IT8712_NR	UART_NR
++#define UART_PORT_SIZE 0x50
++#define LPC_HOST_CONTINUE_MODE	0x00000040
++
++#define IT8712_NO_PORTS         UART_NR
++#define IT8712_ISR_PASS_LIMIT	256
++
++#define LPC_BUS_CTRL	*(unsigned int*)(IO_ADDRESS(SL2312_LPC_HOST_BASE + 4))
++#define LPC_BUS_STATUS	*(unsigned int*)(IO_ADDRESS(SL2312_LPC_HOST_BASE + 4))
++#define LPC_SERIAL_IRQ_CTRL	*(unsigned int*)(IO_ADDRESS(SL2312_LPC_HOST_BASE + 8))
++#define LPC_SERIAL_IRQ_STATUS	*(unsigned int*)(IO_ADDRESS(SL2312_LPC_HOST_BASE + 0x0c))
++#define LPC_SERIAL_IRQ_TRITYPE *(unsigned int*)(IO_ADDRESS(SL2312_LPC_HOST_BASE + 0x10))
++#define LPC_SERIAL_IRQ_POLARITY	*(unsigned int*)(IO_ADDRESS(SL2312_LPC_HOST_BASE + 0x14))
++#define LPC_SERIAL_IRQ_ENABLE	*(unsigned int*)(IO_ADDRESS(SL2312_LPC_HOST_BASE + 0x18))
++
++
++
++
++/*
++ * Access macros for the SL2312 UARTs
++ */
++#define UART_GET_INT_STATUS(p)	(inb(((p)->membase+UART_IIR)) & 0x0F)  // interrupt identification
++#define UART_PUT_IER(p, c)      outb(c,((p)->membase+UART_IER))         // interrupt enable
++#define UART_GET_IER(p)         inb(((p)->membase+UART_IER))
++#define UART_PUT_CHAR(p, c)     outb(c,((p)->membase+UART_TX))         // transmitter holding
++#define UART_GET_CHAR(p)        inb(((p)->membase+UART_RX))            // receive buffer
++#define UART_GET_LSR(p)         inb(((p)->membase+UART_LSR))            // line status
++#define UART_GET_MSR(p)         inb(((p)->membase+UART_MSR))            // modem status
++#define UART_GET_MCR(p)         inb(((p)->membase+UART_MCR))            // modem control
++#define UART_PUT_MCR(p, c)      outb(c,((p)->membase+UART_MCR))
++#define UART_GET_LCR(p)         inb(((p)->membase+UART_LCR))       // mode control
++#define UART_PUT_LCR(p, c)      outb(c,((p)->membase+UART_LCR))
++#define UART_PUT_FCR(p, c)      outb(c,((p)->membase+UART_FCR))       // fifo control
++#define UART_GET_DIV_HI(p)	inb(((p)->membase+UART_DLM))
++#define UART_PUT_DIV_HI(p, c)	outb(c,((p)->membase+UART_DLM))
++#define UART_GET_DIV_LO(p)	inb(((p)->membase+UART_DLL))
++#define UART_PUT_DIV_LO(p, c)	outb(c,((p)->membase+UART_DLL))
++#define UART_PUT_MDR(p, c)      outb(c,UART_MDR((p)->membase))
++#define UART_RX_DATA(s)		((s) & UART_LSR_DR)
++#define UART_TX_READY(s)	((s) & UART_LSR_THRE)
++
++static void it8712_stop_tx(struct uart_port *port, u_int from_tty)
++{
++        unsigned int reg;
++
++        //printk("it8712 stop tx : \n");
++        reg = UART_GET_IER(port);
++        reg &= ~(UART_IER_THRI);
++	UART_PUT_IER(port, reg);
++}
++
++static void it8712_stop_rx(struct uart_port *port)
++{
++        unsigned int reg;
++
++        //printk("it8712 stop rx : \n");
++        reg = UART_GET_IER(port);
++        reg &= ~(UART_IER_RDI);
++	UART_PUT_IER(port, reg);
++
++}
++
++static void it8712_enable_ms(struct uart_port *port)
++{
++        unsigned int reg;
++
++        //printk("it8712 enable ms : \n");
++
++        reg = UART_GET_IER(port);
++        reg |= (UART_IER_MSI);
++	UART_PUT_IER(port, reg);
++
++}
++
++static void it8712_rx_chars(struct uart_port *port, struct pt_regs *regs)
++{
++	struct tty_struct *tty = port->info->tty;
++	unsigned int status, mask, ch, flg, ignored = 0;
++
++ //       printk("it8712_rx_chars : \n");
++	status = UART_GET_LSR(port);
++	while (UART_RX_DATA(status)) {
++
++		/*
++		 * We need to read rds before reading the
++		 * character from the fifo
++		 */
++		ch = UART_GET_CHAR(port);
++		port->icount.rx++;
++
++		if (tty->flip.count >= TTY_FLIPBUF_SIZE)
++			goto ignore_char;
++
++		flg = TTY_NORMAL;
++
++		/*
++		 * Note that the error handling code is
++		 * out of the main execution path
++		 */
++
++		if (status & (UART_LSR_OE|UART_LSR_PE|UART_LSR_FE|UART_LSR_BI|UART_LSR_DE))
++			goto handle_error;
++		if (uart_handle_sysrq_char(port, ch, regs))
++			goto ignore_char;
++
++	error_return:
++		*tty->flip.flag_buf_ptr++ = flg;
++		*tty->flip.char_buf_ptr++ = ch;
++		tty->flip.count++;
++	ignore_char:
++		status = UART_GET_LSR(port);
++	} // end of while
++out:
++	tty_flip_buffer_push(tty);
++	return;
++
++handle_error:
++	if (status & UART_LSR_BI) {
++		status &= ~(UART_LSR_FE);
++		port->icount.brk++;
++
++#ifdef SUPPORT_SYSRQ
++		if (uart_handle_break(port))
++			goto ignore_char;
++#endif
++	} else if (status & UART_LSR_PE)
++		port->icount.parity++;
++	else if (status & UART_LSR_FE)
++		port->icount.frame++;
++
++	if (status & UART_LSR_OE)
++		port->icount.overrun++;
++
++	if (status & port->ignore_status_mask) {
++		if (++ignored > 100)
++			goto out;
++		goto ignore_char;
++	}
++
++	mask = status & port->read_status_mask;
++
++	if (mask & UART_LSR_BI)
++		flg = TTY_BREAK;
++	else if (mask & UART_LSR_PE)
++		flg = TTY_PARITY;
++	else if (mask & UART_LSR_FE)
++		flg = TTY_FRAME;
++
++	if (status & UART_LSR_OE) {
++		/*
++		 * CHECK: does overrun affect the current character?
++		 * ASSUMPTION: it does not.
++		 */
++		*tty->flip.flag_buf_ptr++ = flg;
++		*tty->flip.char_buf_ptr++ = ch;
++		tty->flip.count++;
++		if (tty->flip.count >= TTY_FLIPBUF_SIZE)
++			goto ignore_char;
++		ch = 0;
++		flg = TTY_OVERRUN;
++	}
++#ifdef SUPPORT_SYSRQ
++	port->sysrq = 0;
++#endif
++	goto error_return;
++}
++
++static void it8712_tx_chars(struct uart_port *port)
++{
++        struct circ_buf *xmit = &port->info->xmit;
++	int count;
++
++	if (port->x_char) {
++		while(!(UART_GET_LSR(port)&UART_LSR_THRE));
++		UART_PUT_CHAR(port, port->x_char);
++		port->icount.tx++;
++		port->x_char = 0;
++
++		return;
++	}
++	if (uart_circ_empty(xmit) || uart_tx_stopped(port)) {
++		it8712_stop_tx(port, 0);
++		return;
++	}
++
++	count = port->fifosize >> 1;
++	do {
++		while(!(UART_GET_LSR(port)&UART_LSR_THRE));
++		UART_PUT_CHAR(port, xmit->buf[xmit->tail]);
++		xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
++		port->icount.tx++;
++		if (uart_circ_empty(xmit))
++			break;
++	} while (--count > 0);
++
++	if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
++		uart_write_wakeup(port);
++
++	if (uart_circ_empty(xmit))
++		it8712_stop_tx(port, 0);
++}
++
++static void it8712_start_tx(struct uart_port *port, unsigned int tty_start)
++{
++        unsigned int reg;
++
++        //printk("it8712 start tx : \n");
++        reg = UART_GET_IER(port);
++        reg |= (UART_IER_THRI);
++	UART_PUT_IER(port, reg);
++	it8712_tx_chars(port);
++}
++
++static void it8712_modem_status(struct uart_port *port)
++{
++	unsigned int status;
++
++//        printk("it8712 modem status : \n");
++
++	status = UART_GET_MSR(port);
++
++	if (!(status & (UART_MSR_DCTS | UART_MSR_DDSR |
++		       UART_MSR_TERI | UART_MSR_DDCD)))
++		return;
++
++        if (status & UART_MSR_DDCD)
++                uart_handle_dcd_change(port, status & UART_MSR_DCD);
++
++        if (status & UART_MSR_DDSR)
++                port->icount.dsr++;
++
++        if (status & UART_MSR_DCTS)
++                uart_handle_cts_change(port, status & UART_MSR_CTS);
++
++	wake_up_interruptible(&port->info->delta_msr_wait);
++
++}
++
++static irqreturn_t  it8712_int(int irq, void *dev_id, struct pt_regs *regs)
++{
++	struct uart_port *port = dev_id;
++	unsigned int status, pass_counter = 0, data;
++
++
++		data = LPC_SERIAL_IRQ_STATUS;
++	if((data&0x10)==0x10)
++	{
++		status = UART_GET_INT_STATUS(port);
++		do {
++//			     printk("it8712_int: status %x \n", status);
++			switch(status)
++			{
++			   case UART_IIR_RDI:
++			   case UART_IIR_RLSI:
++			   case UART_IIR_RCTO:
++				it8712_rx_chars(port, regs);
++			   break;
++			   case UART_IIR_THRI:
++				it8712_tx_chars(port);
++			   break;
++			   case UART_IIR_MSI:
++				it8712_modem_status(port);
++			   break;
++			   default:
++			   break;
++			}
++			if (pass_counter++ > IT8712_ISR_PASS_LIMIT)
++				break;
++
++			status = UART_GET_INT_STATUS(port);
++		} while (status);
++	}
++
++		status = 0;
++        status |= (IRQ_LPC_MASK);
++        *((volatile unsigned int *)IRQ_CLEAR(IO_ADDRESS(SL2312_INTERRUPT_BASE))) = status;
++
++	//cnt=0;
++	//do{
++	//	data = LPC_SERIAL_IRQ_STATUS;
++		LPC_SERIAL_IRQ_STATUS = data;
++	//	cnt++;
++	//}while(data);
++	//if(cnt>2)
++	//	printf("it8712_uart_Isr clear LPC_SERIAL_IRQ_STATUS %x \n", cnt);
++        return IRQ_HANDLED;
++}
++
++static u_int it8712_tx_empty(struct uart_port *port)
++{
++//        printk("it8712 tx empty : \n");
++
++	return ((UART_GET_LSR(port) & UART_LSR_THRE)? TIOCSER_TEMT : 0);
++}
++
++static u_int it8712_get_mctrl(struct uart_port *port)
++{
++	unsigned int result = 0;
++	unsigned int status;
++
++//        printk("it8712 get mctrl : \n");
++
++	status = UART_GET_MSR(port);
++	if (status & UART_MSR_DCD)
++		result |= TIOCM_CAR;
++	if (status & UART_MSR_DSR)
++		result |= TIOCM_DSR;
++	if (status & UART_MSR_CTS)
++		result |= TIOCM_CTS;
++	if (status & UART_MSR_RI)
++		result |= TIOCM_RI;
++
++	return result;
++}
++
++static void it8712_set_mctrl_null(struct uart_port *port, u_int mctrl)
++{
++}
++
++static void it8712_break_ctl(struct uart_port *port, int break_state)
++{
++	unsigned int lcr;
++
++//        printk("it8712 break ctl : \n");
++
++	lcr = UART_GET_LCR(port);
++	if (break_state == -1)
++		lcr |= UART_LCR_SBC;
++	else
++		lcr &= ~UART_LCR_SBC;
++	UART_PUT_LCR(port, lcr);
++}
++
++static inline u_int uart_calculate_quot(struct uart_port *port, u_int baud)
++{
++	u_int quot;
++
++	/* Special case: B0 rate */
++	if (!baud)
++		baud = 9600;
++
++	quot = (port->uartclk/(16 * baud)) ;
++
++	return quot;
++}
++static void it8712_set_termios(struct uart_port *port, struct termios *termios,
++                               struct termios *old)
++{
++	unsigned int  uart_mc, old_ier, baud, quot;
++	unsigned long flags;
++
++        termios->c_cflag |= CREAD;
++        termios->c_cflag |= CLOCAL;
++#ifdef DEBUG
++	printk("it8712_set_cflag(0x%x) called\n", cflag);
++#endif
++        baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16);
++        quot = uart_get_divisor(port, baud);
++
++	/* byte size and parity */
++	switch (termios->c_cflag & CSIZE) {
++	case CS5:
++              uart_mc = UART_LCR_WLEN5;
++              break;
++	case CS6:
++              uart_mc = UART_LCR_WLEN6;
++              break;
++	case CS7:
++              uart_mc = UART_LCR_WLEN7;
++              break;
++	default: // CS8
++              uart_mc = UART_LCR_WLEN8;
++              break;
++	}
++
++	if (termios->c_cflag & CSTOPB)
++		uart_mc|= UART_LCR_STOP;
++	if (termios->c_cflag & PARENB) {
++		uart_mc |= UART_LCR_EVEN;
++		if (!(termios->c_cflag & PARODD))
++			uart_mc |= UART_LCR_ODD;
++	}
++
++        spin_lock_irqsave(&port->lock, flags);
++        /*
++         * Update the per-port timeout
++         */
++        uart_update_timeout(port, termios->c_cflag, baud);
++	port->read_status_mask = UART_LSR_OE;
++	if (termios->c_iflag & INPCK)
++		port->read_status_mask |= UART_LSR_FE | UART_LSR_PE;
++	if (termios->c_iflag & (BRKINT | PARMRK))
++		port->read_status_mask |= UART_LSR_BI;
++
++	/*
++	 * Characters to ignore
++	 */
++	port->ignore_status_mask = 0;
++	if (termios->c_iflag & IGNPAR)
++		port->ignore_status_mask |= UART_LSR_FE | UART_LSR_PE;
++	if (termios->c_iflag & IGNBRK) {
++		port->ignore_status_mask |= UART_LSR_BI;
++		/*
++		 * If we're ignoring parity and break indicators,
++		 * ignore overruns to (for real raw support).
++		 */
++		if (termios->c_iflag & IGNPAR)
++			port->ignore_status_mask |= UART_LSR_OE;
++	}
++
++	old_ier = UART_GET_IER(port);
++
++        if(UART_ENABLE_MS(port, termios->c_cflag))
++             old_ier |= UART_IER_MSI;
++
++	/* Set baud rate */
++	quot = quot / 13;
++	UART_PUT_LCR(port, UART_LCR_DLAB);
++	UART_PUT_DIV_LO(port, (quot & 0xff));
++	UART_PUT_DIV_HI(port, ((quot & 0xf00) >> 8));
++
++	UART_PUT_LCR(port, uart_mc);
++//	UART_PUT_LCR(port, 0x07); // ???? it is wired
++        UART_PUT_MCR(port, 0x08);
++        UART_PUT_FCR(port, 0x01);
++	UART_PUT_IER(port, 0x07);
++
++	spin_unlock_irqrestore(&port->lock, flags);
++}
++
++static int it8712_startup(struct uart_port *port)
++{
++	int retval, i;
++	unsigned int regs;
++
++        //printk("it8712 startup : \n");
++
++	/*
++	 * Use iobase to store a pointer to info. We need this to start a
++	 * transmission as the tranmittr interrupt is only generated on
++	 * the transition to the idle state
++	 */
++
++	//	regs = 0;
++    //    regs |= (IRQ_LPC_MASK);
++    //    *((volatile unsigned int *)IRQ_CLEAR(IO_ADDRESS(SL2312_INTERRUPT_BASE))) = regs;
++
++	/*
++	 * Allocate the IRQ
++	 */
++	retval = request_irq(port->irq, it8712_int, SA_INTERRUPT, "it8712", port);
++	if (retval)
++		return retval;
++
++	//printk("Init LPC int...........\n");
++        /* setup interrupt controller  */
++        regs = *((volatile unsigned int *)IRQ_TMODE(IO_ADDRESS(SL2312_INTERRUPT_BASE)));
++        regs &= ~(IRQ_LPC_MASK);
++        *((volatile unsigned int *)IRQ_TMODE(IO_ADDRESS(SL2312_INTERRUPT_BASE))) = regs;
++        regs = *((volatile unsigned int *)IRQ_TLEVEL(IO_ADDRESS(SL2312_INTERRUPT_BASE)));
++        regs &= ~(IRQ_LPC_MASK);
++        *((volatile unsigned int *)IRQ_TLEVEL(IO_ADDRESS(SL2312_INTERRUPT_BASE))) = regs;
++        *((volatile unsigned int *)IRQ_MASK(IO_ADDRESS(SL2312_INTERRUPT_BASE))) |= (unsigned int)(IRQ_LPC_MASK);
++
++	LPC_SERIAL_IRQ_POLARITY = 0x10; //0x10; //0x02;
++	LPC_SERIAL_IRQ_TRITYPE = 0x10; //0x10;//
++	LPC_SERIAL_IRQ_ENABLE = 0x10;
++
++	LPC_BUS_CTRL = 0xc0;
++	LPC_SERIAL_IRQ_CTRL = 0xc0;
++	for(i=0;i<1000;i++) ;
++	LPC_SERIAL_IRQ_CTRL = 0x80;
++	/*
++	 * Finally, enable interrupts. Use the TII interrupt to minimise
++	 * the number of interrupts generated. If higher performance is
++	 * needed, consider using the TI interrupt with a suitable FIFO
++	 * threshold
++	 */
++	//UART_PUT_IER(port, (UART_IER_RDI|UART_IER_THRI));
++	UART_PUT_IER(port, (UART_IER_RDI|UART_IER_THRI|UART_IER_RLSI));//middle
++
++	return 0;
++}
++
++static void it8712_shutdown(struct uart_port *port)
++{
++        //printk("it8712 shutdown : \n");
++
++	/*
++	 * disable all interrupts, disable the port
++	 */
++	UART_PUT_IER(port, 0x0);
++
++	/* disable break condition and fifos */
++//	UART_PUT_MCR(port, (UART_GET_MCR(port)&UART_MCR_MASK));
++
++	/*
++	 * Free the interrupt
++	 */
++	free_irq(port->irq, port);
++}
++
++static const char *it8712_type(struct uart_port *port)
++{
++	return port->type == PORT_IT8712 ? "IT8712" : NULL;
++}
++
++/*
++ * Release the memory region(s) being used by 'port'
++ */
++static void it8712_release_port(struct uart_port *port)
++{
++//        printk("it8712 release port : \n");
++
++	release_mem_region(port->mapbase, UART_PORT_SIZE);
++}
++
++/*
++ * Request the memory region(s) being used by 'port'
++ */
++static int it8712_request_port(struct uart_port *port)
++{
++	return request_mem_region(port->mapbase, UART_PORT_SIZE,
++				    "serial_it8712") != NULL ? 0 : -EBUSY;
++}
++
++/*
++ * Configure/autoconfigure the port.
++ */
++static void it8712_config_port(struct uart_port *port, int flags)
++{
++
++	if (flags & UART_CONFIG_TYPE) {
++		if (it8712_request_port(port) == 0)
++			port->type = PORT_IT8712;
++	}
++}
++
++/*
++ * verify the new serial_struct (for TIOCSSERIAL).
++ */
++static int it8712_verify_port(struct uart_port *port, struct serial_struct *ser)
++{
++	int ret = 0;
++
++	if (ser->type != PORT_UNKNOWN && ser->type != PORT_UART00)
++		ret = -EINVAL;
++	if (ser->irq < 0 || ser->irq >= NR_IRQS)
++		ret = -EINVAL;
++	if (ser->baud_base < 9600)
++		ret = -EINVAL;
++	return ret;
++}
++
++static struct uart_ops it8712_pops = {
++	.tx_empty	= it8712_tx_empty,
++	.set_mctrl	= it8712_set_mctrl_null,
++	.get_mctrl	= it8712_get_mctrl,
++	.stop_tx	= it8712_stop_tx,
++	.start_tx	= it8712_start_tx,
++	.stop_rx	= it8712_stop_rx,
++	.enable_ms	= it8712_enable_ms,
++	.break_ctl	= it8712_break_ctl,
++	.startup	= it8712_startup,
++	.shutdown	= it8712_shutdown,
++	.set_termios	= it8712_set_termios,
++	.type		= it8712_type,
++	.release_port	= it8712_release_port,
++	.request_port	= it8712_request_port,
++	.config_port	= it8712_config_port,
++	.verify_port	= it8712_verify_port,
++};
++
++#ifdef CONFIG_ARCH_SL2312
++
++static struct uart_port it8712_ports[UART_NR] = {
++	{
++		membase:	(void *)0,
++		mapbase:	0,
++		iotype:		SERIAL_IO_MEM,
++		irq:		0,
++		uartclk:	UART_CLK/2,
++		fifosize:	16,
++		ops:		&it8712_pops,
++		flags:		ASYNC_BOOT_AUTOCONF,
++	}
++};
++
++#endif
++
++#ifdef CONFIG_SERIAL_IT8712_CONSOLE
++#ifdef used_and_not_const_char_pointer
++static int it8712_console_read(struct uart_port *port, char *s, u_int count)
++{
++	unsigned int status;
++	int c;
++#ifdef DEBUG
++	printk("it8712_console_read() called\n");
++#endif
++
++	c = 0;
++	while (c < count) {
++		status = UART_GET_LSR(port);
++ 		if (UART_RX_DATA(status)) {
++			*s++ = UART_GET_CHAR(port);
++			c++;
++		} else {
++			// nothing more to get, return
++			return c;
++		}
++	}
++	// return the count
++	return c;
++}
++#endif
++static void it8712_console_write(struct console *co, const char *s, unsigned count)
++{
++#ifdef CONFIG_ARCH_SL2312
++	struct uart_port *port = it8712_ports + co->index;
++	unsigned int status, old_ies;
++	int i;
++
++	/*
++	 *	First save the CR then disable the interrupts
++	 */
++	old_ies = UART_GET_IER(port);
++	//if(old_ies!=7)
++	//{
++	//
++	//	printk("old_ies = %x\n",old_ies);
++	//	old_ies = 7;
++	//}
++	UART_PUT_IER(port,0x0);
++
++	/*
++	 *	Now, do each character
++	 */
++	for (i = 0; i < count; i++) {
++		do {
++			status = UART_GET_LSR(port);
++		} while (!UART_TX_READY(status));
++		UART_PUT_CHAR(port, s[i]);
++		if (s[i] == '\n') {
++			do {
++				status = UART_GET_LSR(port);
++			} while (!UART_TX_READY(status));
++			UART_PUT_CHAR(port, '\r');
++		}
++	}
++
++	/*
++	 *	Finally, wait for transmitter to become empty
++	 *	and restore the IES
++	 */
++	do {
++		status = UART_GET_LSR(port);
++	} while (!(status&UART_LSR_THRE));
++	UART_PUT_IER(port, old_ies);
++#endif
++}
++
++static void /*__init*/ it8712_console_get_options(struct uart_port *port, int *baud, int *parity, int *bits)
++{
++	//printk("it8712 console get options : \n");
++
++	u_int uart_mc, quot;
++	uart_mc= UART_GET_MCR(port);
++
++	*parity = 'n';
++	if (uart_mc & UART_LCR_PARITY) {
++		if (uart_mc & UART_LCR_EVEN)
++			*parity = 'e';
++		else
++			*parity = 'o';
++	}
++
++	switch (uart_mc & UART_LCR_MSK){
++
++	case UART_LCR_WLEN5:
++		*bits = 5;
++		break;
++	case UART_LCR_WLEN6:
++		*bits = 6;
++		break;
++	case UART_LCR_WLEN7:
++		*bits = 7;
++		break;
++	case UART_LCR_WLEN8:
++		*bits = 8;
++		break;
++	}
++	UART_PUT_MCR(port,UART_LCR_DLAB);
++	quot = UART_GET_DIV_LO(port) | (UART_GET_DIV_HI(port) << 8);
++	UART_PUT_MCR(port,uart_mc);
++	*baud = (port->uartclk / (16 *quot));
++}
++
++static int __init it8712_console_setup(struct console *co, char *options)
++{
++	struct uart_port *port;
++	int baud = 38400;
++	int bits = 8;
++	int parity = 'n';
++	int flow= 'n';
++	int base;//, irq;
++	int i ;
++
++	printk("it8712 console setup : \n");
++
++	LPCSetConfig(0, 0x02, 0x01);
++        LPCSetConfig(LDN_SERIAL1, 0x30, 0x1);
++        LPCSetConfig(LDN_SERIAL1, 0x23, 0x0);
++	base = IT8712_IO_BASE;
++	base += ((LPCGetConfig(LDN_SERIAL1, 0x60) << 8) + LPCGetConfig(LDN_SERIAL1, 0x61));
++	it8712_ports[0].mapbase = base;
++	it8712_ports[0].membase = (void *)IO_ADDRESS(base);
++	it8712_ports[0].irq = IRQ_LPC_OFFSET;
++    //   	irq = LPCGetConfig(LDN_SERIAL1, 0x70);
++	//it8712_ports[0].irq += irq;
++
++	//printk("it8712 irq is %x \n", it8712_ports[0].irq);
++
++	// setup LPC Host 'quiet mode'
++	//*((volatile unsigned int *)IO_ADDRESS((SL2312_LPC_HOST_BASE+0x04))) |= LPC_HOST_CONTINUE_MODE ;
++	//for(i=0;i<1000;i++) ;						// delay
++	//*((volatile unsigned int *)IO_ADDRESS((SL2312_LPC_HOST_BASE+0x04))) &= ~(LPC_HOST_CONTINUE_MODE) ;
++	LPC_BUS_CTRL = 0xc0;
++	LPC_SERIAL_IRQ_CTRL = 0xc0;
++	for(i=0;i<1000;i++) ;
++	LPC_SERIAL_IRQ_CTRL = 0x80;
++
++#ifdef CONFIG_ARCH_SL2312
++	/*
++	 * Check whether an invalid uart number has been specified, and
++	 * if so, search for the first available port that does have
++	 * console support.
++	 */
++	port = uart_get_console(it8712_ports,IT8712_NO_PORTS,co);
++#else
++	return -ENODEV;
++#endif
++
++	if (options)
++		uart_parse_options(options, &baud, &parity, &bits, &flow);
++	else
++		it8712_console_get_options(port, &baud, &parity, &bits);
++
++	return uart_set_options(port, co, baud, parity, bits, flow);
++}
++
++extern struct uart_driver it8712_reg;
++static struct console it8712_console = {
++	.name           = SERIAL_IT8712_NAME,
++	.write		= it8712_console_write,
++	.device		= uart_console_device,
++        .setup          = it8712_console_setup,
++	.flags		= CON_PRINTBUFFER,
++	.index		= 0,
++        .data           = &it8712_reg,
++};
++
++static int __init it8712_console_init(void)
++{
++	register_console(&it8712_console);
++        return 0;
++}
++
++console_initcall(it8712_console_init);
++
++#define IT8712_CONSOLE	&it8712_console
++#else
++#define IT8712_CONSOLE	NULL
++#endif
++
++static struct uart_driver it8712_reg = {
++	.owner                  = NULL,
++	.driver_name		= SERIAL_IT8712_NAME,
++	.dev_name		= SERIAL_IT8712_NAME,
++        .major                  = SERIAL_IT8712_MAJOR,
++	.minor			= SERIAL_IT8712_MINOR,
++	.nr			= UART_NR,
++	.cons			= IT8712_CONSOLE,
++};
++
++static int __init it8712_init(void)
++{
++        int result;
++	//printk("serial_it8712: it871212_init \n");
++
++
++        result = uart_register_driver(&it8712_reg);
++        if(result)
++             return result;
++	result = uart_add_one_port(&it8712_reg, &it8712_ports[0]);
++
++        return result;
++
++}
++
++
++__initcall(it8712_init);
+--- /dev/null
++++ b/drivers/serial/it8712.h
+@@ -0,0 +1,135 @@
++#define UART_RX		0	/* In:  Receive buffer (DLAB=0) */
++#define UART_TX		0	/* Out: Transmit buffer (DLAB=0) */
++#define UART_DLL	0	/* Out: Divisor Latch Low (DLAB=1) */
++#define UART_TRG	0	/* (LCR=BF) FCTR bit 7 selects Rx or Tx
++				 * In: Fifo count
++				 * Out: Fifo custom trigger levels
++				 * XR16C85x only */
++
++#define UART_DLM	1	/* Out: Divisor Latch High (DLAB=1) */
++#define UART_IER	1	/* Out: Interrupt Enable Register */
++#define UART_FCTR	1	/* (LCR=BF) Feature Control Register
++				 * XR16C85x only */
++
++#define UART_IIR	2	/* In:  Interrupt ID Register */
++#define UART_FCR	2	/* Out: FIFO Control Register */
++#define UART_EFR	2	/* I/O: Extended Features Register */
++				/* (DLAB=1, 16C660 only) */
++
++#define UART_LCR	3	/* Out: Line Control Register */
++#define UART_MCR	4	/* Out: Modem Control Register */
++#define UART_LSR	5	/* In:  Line Status Register */
++#define UART_MSR	6	/* In:  Modem Status Register */
++#define UART_SCR	7	/* I/O: Scratch Register */
++#define UART_EMSR	7	/* (LCR=BF) Extended Mode Select Register
++				 * FCTR bit 6 selects SCR or EMSR
++				 * XR16c85x only */
++
++/*
++ * These are the definitions for the FIFO Control Register
++ * (16650 only)
++ */
++#define UART_FCR_ENABLE_FIFO	0x01 /* Enable the FIFO */
++#define UART_FCR_CLEAR_RCVR	0x02 /* Clear the RCVR FIFO */
++#define UART_FCR_CLEAR_XMIT	0x04 /* Clear the XMIT FIFO */
++#define UART_FCR_DMA_SELECT	0x08 /* For DMA applications */
++#define UART_FCR_TRIGGER_MASK	0xC0 /* Mask for the FIFO trigger range */
++#define UART_FCR_TRIGGER_1	0x00 /* Mask for trigger set at 1 */
++#define UART_FCR_TRIGGER_4	0x40 /* Mask for trigger set at 4 */
++#define UART_FCR_TRIGGER_8	0x80 /* Mask for trigger set at 8 */
++#define UART_FCR_TRIGGER_14	0xC0 /* Mask for trigger set at 14 */
++/* 16650 redefinitions */
++#define UART_FCR6_R_TRIGGER_8	0x00 /* Mask for receive trigger set at 1 */
++#define UART_FCR6_R_TRIGGER_16	0x40 /* Mask for receive trigger set at 4 */
++#define UART_FCR6_R_TRIGGER_24  0x80 /* Mask for receive trigger set at 8 */
++#define UART_FCR6_R_TRIGGER_28	0xC0 /* Mask for receive trigger set at 14 */
++#define UART_FCR6_T_TRIGGER_16	0x00 /* Mask for transmit trigger set at 16 */
++#define UART_FCR6_T_TRIGGER_8	0x10 /* Mask for transmit trigger set at 8 */
++#define UART_FCR6_T_TRIGGER_24  0x20 /* Mask for transmit trigger set at 24 */
++#define UART_FCR6_T_TRIGGER_30	0x30 /* Mask for transmit trigger set at 30 */
++/* TI 16750 definitions */
++#define UART_FCR7_64BYTE	0x20 /* Go into 64 byte mode */
++
++/*
++ * These are the definitions for the Line Control Register
++ *
++ * Note: if the word length is 5 bits (UART_LCR_WLEN5), then setting
++ * UART_LCR_STOP will select 1.5 stop bits, not 2 stop bits.
++ */
++#define UART_LCR_DLAB	0x80	/* Divisor latch access bit */
++#define UART_LCR_SBC	0x40	/* Set break control */
++#define UART_LCR_SPAR	0x20	/* Stick parity (?) */
++#define UART_LCR_EPAR	0x10	/* Even parity select */
++#define UART_LCR_PARITY	0x08	/* Parity Enable */
++#define UART_LCR_STOP	0x04	/* Stop bits: 0=1 stop bit, 1= 2 stop bits */
++#define UART_LCR_WLEN5  0x00	/* Wordlength: 5 bits */
++#define UART_LCR_WLEN6  0x01	/* Wordlength: 6 bits */
++#define UART_LCR_WLEN7  0x02	/* Wordlength: 7 bits */
++#define UART_LCR_WLEN8  0x03	/* Wordlength: 8 bits */
++#define UART_LCR_EVEN   0x18    /* Even parity */
++#define UART_LCR_ODD    0x08    /* Odd parity */
++#define UART_LCR_MSK    0x03
++/*
++ * These are the definitions for the Line Status Register
++ */
++#define UART_LSR_DE     0x80    /* FIFO Data Error */
++#define UART_LSR_TEMT	0x40	/* Transmitter empty */
++#define UART_LSR_THRE	0x20	/* Transmit-hold-register empty */
++#define UART_LSR_BI	0x10	/* Break interrupt indicator */
++#define UART_LSR_FE	0x08	/* Frame error indicator */
++#define UART_LSR_PE	0x04	/* Parity error indicator */
++#define UART_LSR_OE	0x02	/* Overrun error indicator */
++#define UART_LSR_DR	0x01	/* Receiver data ready */
++
++/*
++ * These are the definitions for the Interrupt Identification Register
++ */
++#define UART_IIR_NO_INT	0x01	/* No interrupts pending */
++#define UART_IIR_ID	0x06	/* Mask for the interrupt ID */
++
++#define UART_IIR_MSI	0x00	/* Modem status interrupt */
++#define UART_IIR_THRI	0x02	/* Transmitter holding register empty */
++#define UART_IIR_RDI	0x04	/* Receiver data interrupt */
++#define UART_IIR_RLSI	0x06	/* Receiver line status interrupt */
++#define UART_IIR_RCTO	0x0c	/* Receiver character timeout interrupt */
++/*
++ * These are the definitions for the Interrupt Enable Register
++ */
++#define UART_IER_MSI	0x08	/* Enable Modem status interrupt */
++#define UART_IER_RLSI	0x04	/* Enable receiver line status interrupt */
++#define UART_IER_THRI	0x02	/* Enable Transmitter holding register int. */
++#define UART_IER_RDI	0x01	/* Enable receiver data interrupt */
++/*
++ * Sleep mode for ST16650 and TI16750.
++ * Note that for 16650, EFR-bit 4 must be selected as well.
++ */
++#define UART_IERX_SLEEP  0x10	/* Enable sleep mode */
++
++/*
++ * These are the definitions for the Modem Control Register
++ */
++#define UART_MCR_LOOP	0x10	/* Enable loopback test mode */
++#define UART_MCR_OUT2	0x08	/* Out2 complement */
++#define UART_MCR_OUT1	0x04	/* Out1 complement */
++#define UART_MCR_RTS	0x02	/* RTS complement */
++#define UART_MCR_DTR	0x01	/* DTR complement */
++
++/*
++ * These are the definitions for the Modem Status Register
++ */
++#define UART_MSR_DCD	0x80	/* Data Carrier Detect */
++#define UART_MSR_RI	0x40	/* Ring Indicator */
++#define UART_MSR_DSR	0x20	/* Data Set Ready */
++#define UART_MSR_CTS	0x10	/* Clear to Send */
++#define UART_MSR_DDCD	0x08	/* Delta DCD */
++#define UART_MSR_TERI	0x04	/* Trailing edge ring indicator */
++#define UART_MSR_DDSR	0x02	/* Delta DSR */
++#define UART_MSR_DCTS	0x01	/* Delta CTS */
++#define UART_MSR_ANY_DELTA 0x0F	/* Any of the delta bits! */
++
++#define UART_PARITY_NONE	0x00
++#define UART_PARITY_ODD		0x01
++#define UART_PARITY_EVEN	0x02
++
++
++
+--- /dev/null
++++ b/drivers/serial/serial_it8712.c
+@@ -0,0 +1,876 @@
++/*
++ *  linux/drivers/char/serial_uart00.c
++ *
++ *  Driver for UART00 serial ports
++ *
++ *  Based on drivers/char/serial_amba.c, by ARM Limited &
++ *                                          Deep Blue Solutions Ltd.
++ *  Copyright 2001 Altera Corporation
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
++ *
++ *  $Id: serial_it8712.c,v 1.1.1.1 2006/04/03 08:41:00 amos_lee Exp $
++ *
++ */
++#include 
++
++#include 
++#include 
++#include 
++#include 
++#include 
++#include 
++#include 
++#include 
++#include 
++#include 
++#include 
++#include 
++#include 
++#include 
++#include 
++#include 
++#include 
++#include 
++
++#include 
++#include 
++#include 
++#include 
++#include 
++#include 
++
++#if defined(CONFIG_SERIAL_IT8712_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
++#define SUPPORT_SYSRQ
++#endif
++
++#include 
++#include 
++#include 
++#include 
++#include "serial_it8712.h"
++
++//#define DEBUG           1
++#define UART_NR		1
++
++#define SERIAL_IT8712_NAME	"ttySI"
++#define SERIAL_IT8712_MAJOR	204
++#define SERIAL_IT8712_MINOR	41      /* Temporary - will change in future */
++#define SERIAL_IT8712_NR	UART_NR
++#define UART_PORT_SIZE 0x50
++
++#define CALLOUT_IT8712_NAME	"cuaslI"
++#define CALLOUT_IT8712_MAJOR	205
++#define CALLOUT_IT8712_MINOR	41      /* Temporary - will change in future */
++#define CALLOUT_IT8712_NR	UART_NR
++#define LPC_HOST_CONTINUE_MODE	0x00000040
++
++#define IT8712_NO_PORTS         UART_NR
++
++static struct tty_driver normal, callout;
++static struct tty_struct *it8712_table[UART_NR];
++static struct termios *it8712_termios[UART_NR], *it8712_termios_locked[UART_NR];
++static struct console it8712_console;
++
++#define IT8712_ISR_PASS_LIMIT	256
++
++/*
++ * Access macros for the SL2312 UARTs
++ */
++#define UART_GET_INT_STATUS(p)	(inb(((p)->membase+UART_IIR)) & 0x0F)  // interrupt identification
++#define UART_PUT_IER(p, c)      outb(c,((p)->membase+UART_IER))         // interrupt enable
++#define UART_GET_IER(p)         inb(((p)->membase+UART_IER))
++#define UART_PUT_CHAR(p, c)     outb(c,((p)->membase+UART_TX))         // transmitter holding
++#define UART_GET_CHAR(p)        inb(((p)->membase+UART_RX))            // receive buffer
++#define UART_GET_LSR(p)         inb(((p)->membase+UART_LSR))            // line status
++#define UART_GET_MSR(p)         inb(((p)->membase+UART_MSR))            // modem status
++#define UART_GET_MCR(p)         inb(((p)->membase+UART_MCR))            // modem control
++#define UART_PUT_MCR(p, c)      outb(c,((p)->membase+UART_MCR))
++#define UART_GET_LCR(p)         inb(((p)->membase+UART_LCR))       // mode control
++#define UART_PUT_LCR(p, c)      outb(c,((p)->membase+UART_LCR))
++#define UART_PUT_FCR(p, c)      outb(c,((p)->membase+UART_FCR))       // fifo control
++#define UART_GET_DIV_HI(p)	inb(((p)->membase+UART_DLM))
++#define UART_PUT_DIV_HI(p, c)	outb(c,((p)->membase+UART_DLM))
++#define UART_GET_DIV_LO(p)	inb(((p)->membase+UART_DLL))
++#define UART_PUT_DIV_LO(p, c)	outb(c,((p)->membase+UART_DLL))
++#define UART_PUT_MDR(p, c)      outb(c,UART_MDR((p)->membase))
++#define UART_RX_DATA(s)		((s) & UART_LSR_DR)
++#define UART_TX_READY(s)	((s) & UART_LSR_THRE)
++
++static void it8712_stop_tx(struct uart_port *port, u_int from_tty)
++{
++        unsigned int reg;
++
++//        printk("it8712 stop tx : \n");
++        reg = UART_GET_IER(port);
++        reg &= ~(UART_IER_THRI);
++	UART_PUT_IER(port, reg);
++}
++
++static void it8712_stop_rx(struct uart_port *port)
++{
++        unsigned int reg;
++
++//        printk("it8712 stop rx : \n");
++        reg = UART_GET_IER(port);
++        reg &= ~(UART_IER_RDI);
++	UART_PUT_IER(port, reg);
++
++}
++
++static void it8712_enable_ms(struct uart_port *port)
++{
++        unsigned int reg;
++
++//        printk("it8712 enable ms : \n");
++
++        reg = UART_GET_IER(port);
++        reg |= (UART_IER_MSI);
++	UART_PUT_IER(port, reg);
++
++}
++
++static void
++it8712_rx_chars(struct uart_info *info, struct pt_regs *regs)
++{
++	struct tty_struct *tty = info->tty;
++	unsigned int status, mask, ch, flg, ignored = 0;
++	struct uart_port *port = info->port;
++
++ //       printk("it8712_rx_chars : \n");
++	status = UART_GET_LSR(port);
++	while (UART_RX_DATA(status)) {
++
++		/*
++		 * We need to read rds before reading the
++		 * character from the fifo
++		 */
++		ch = UART_GET_CHAR(port);
++		port->icount.rx++;
++
++		if (tty->flip.count >= TTY_FLIPBUF_SIZE)
++			goto ignore_char;
++
++		flg = TTY_NORMAL;
++
++		/*
++		 * Note that the error handling code is
++		 * out of the main execution path
++		 */
++
++		if (status & (UART_LSR_OE|UART_LSR_PE|UART_LSR_FE|UART_LSR_BI|UART_LSR_DE))
++			goto handle_error;
++		if (uart_handle_sysrq_char(info, ch, regs))
++			goto ignore_char;
++
++	error_return:
++		*tty->flip.flag_buf_ptr++ = flg;
++		*tty->flip.char_buf_ptr++ = ch;
++		tty->flip.count++;
++	ignore_char:
++		status = UART_GET_LSR(port);
++	} // end of while
++out:
++	tty_flip_buffer_push(tty);
++	return;
++
++handle_error:
++	if (status & UART_LSR_BI) {
++		status &= ~(UART_LSR_FE);
++		port->icount.brk++;
++
++#ifdef SUPPORT_SYSRQ
++		if (uart_handle_break(info, &it8712_console))
++			goto ignore_char;
++#endif
++	} else if (status & UART_LSR_PE)
++		port->icount.parity++;
++	else if (status & UART_LSR_FE)
++		port->icount.frame++;
++
++	if (status & UART_LSR_OE)
++		port->icount.overrun++;
++
++	if (status & port->ignore_status_mask) {
++		if (++ignored > 100)
++			goto out;
++		goto ignore_char;
++	}
++
++	mask = status & port->read_status_mask;
++
++	if (mask & UART_LSR_BI)
++		flg = TTY_BREAK;
++	else if (mask & UART_LSR_PE)
++		flg = TTY_PARITY;
++	else if (mask & UART_LSR_FE)
++		flg = TTY_FRAME;
++
++	if (status & UART_LSR_OE) {
++		/*
++		 * CHECK: does overrun affect the current character?
++		 * ASSUMPTION: it does not.
++		 */
++		*tty->flip.flag_buf_ptr++ = flg;
++		*tty->flip.char_buf_ptr++ = ch;
++		tty->flip.count++;
++		if (tty->flip.count >= TTY_FLIPBUF_SIZE)
++			goto ignore_char;
++		ch = 0;
++		flg = TTY_OVERRUN;
++	}
++#ifdef SUPPORT_SYSRQ
++	info->sysrq = 0;
++#endif
++	goto error_return;
++}
++
++static void it8712_tx_chars(struct uart_info *info)
++{
++	int count;
++	struct uart_port *port=info->port;
++
++	if (port->x_char) {
++		while(!(UART_GET_LSR(port)&UART_LSR_THRE));
++		UART_PUT_CHAR(port, port->x_char);
++		port->icount.tx++;
++		port->x_char = 0;
++
++		return;
++	}
++	if (info->xmit.head == info->xmit.tail
++	    || info->tty->stopped
++	    || info->tty->hw_stopped) {
++		it8712_stop_tx(info->port, 0);
++		return;
++	}
++
++	count = port->fifosize >> 1;
++	do {
++		while(!(UART_GET_LSR(port)&UART_LSR_THRE));
++		UART_PUT_CHAR(port, info->xmit.buf[info->xmit.tail]);
++		info->xmit.tail = (info->xmit.tail + 1) & (UART_XMIT_SIZE - 1);
++		port->icount.tx++;
++		if (info->xmit.head == info->xmit.tail)
++			break;
++	} while (--count > 0);
++
++	if (CIRC_CNT(info->xmit.head,
++		     info->xmit.tail,
++		     UART_XMIT_SIZE) < WAKEUP_CHARS)
++		uart_event(info, EVT_WRITE_WAKEUP);
++
++	if (info->xmit.head == info->xmit.tail)
++		it8712_stop_tx(info->port, 0);
++}
++
++static void it8712_start_tx(struct uart_port *port, u_int nonempty, u_int from_tty)
++{
++        unsigned int reg;
++	struct uart_info *info=(struct uart_info*)(port->iobase);
++
++//        printk("it8712 start tx : \n");
++        reg = UART_GET_IER(port);
++        reg |= (UART_IER_THRI);
++	UART_PUT_IER(port, reg);
++	it8712_tx_chars(info);
++}
++
++static void it8712_modem_status(struct uart_info *info)
++{
++	unsigned int status;
++	struct uart_icount *icount = &info->port->icount;
++
++//        printk("it8712 modem status : \n");
++
++	status = UART_GET_MSR(info->port);
++
++	if (!(status & (UART_MSR_DCTS | UART_MSR_DDSR |
++		       UART_MSR_TERI | UART_MSR_DDCD)))
++		return;
++
++	if (status & UART_MSR_DCD) {
++		icount->dcd++;
++#ifdef CONFIG_HARD_PPS
++		if ((info->flags & ASYNC_HARDPPS_CD) &&
++		    (status & UART_MSR_DCD_MSK))
++			hardpps();
++#endif
++		if (info->flags & ASYNC_CHECK_CD) {
++			if (status & UART_MSR_DCD)
++				wake_up_interruptible(&info->open_wait);
++			else if (!((info->flags & ASYNC_CALLOUT_ACTIVE) &&
++				   (info->flags & ASYNC_CALLOUT_NOHUP))) {
++				if (info->tty)
++					tty_hangup(info->tty);
++			}
++		}
++	}
++
++	if (status & UART_MSR_DDSR)
++		icount->dsr++;
++
++	if (status & UART_MSR_DCTS) {
++		icount->cts++;
++
++		if (info->flags & ASYNC_CTS_FLOW) {
++			status &= UART_MSR_CTS;
++
++			if (info->tty->hw_stopped) {
++				if (status) {
++					info->tty->hw_stopped = 0;
++					info->ops->start_tx(info->port, 1, 0);
++					uart_event(info, EVT_WRITE_WAKEUP);
++				}
++			} else {
++				if (!status) {
++					info->tty->hw_stopped = 1;
++					info->ops->stop_tx(info->port, 0);
++				}
++			}
++		}
++	}
++	wake_up_interruptible(&info->delta_msr_wait);
++
++}
++
++static void it8712_int(int irq, void *dev_id, struct pt_regs *regs)
++{
++	struct uart_info *info = dev_id;
++	unsigned int status, pass_counter = 0;
++
++	status = UART_GET_INT_STATUS(info->port);
++	do {
++//		     printk("it8712_int: status %x \n", status);
++		switch(status)
++		{
++		   case UART_IIR_RDI:
++		   case UART_IIR_RLSI:
++		   case UART_IIR_RCTO:
++			it8712_rx_chars(info, regs);
++		   break;
++		   case UART_IIR_THRI:
++			it8712_tx_chars(info);
++		   break;
++		   case UART_IIR_MSI:
++			it8712_modem_status(info);
++		   break;
++		   default:
++		   break;
++		}
++		if (pass_counter++ > IT8712_ISR_PASS_LIMIT)
++			break;
++
++		status = UART_GET_INT_STATUS(info->port);
++	} while (status);
++}
++
++static u_int it8712_tx_empty(struct uart_port *port)
++{
++//        printk("it8712 tx empty : \n");
++
++	return ((UART_GET_LSR(port) & UART_LSR_THRE)? TIOCSER_TEMT : 0);
++}
++
++static u_int it8712_get_mctrl(struct uart_port *port)
++{
++	unsigned int result = 0;
++	unsigned int status;
++
++//        printk("it8712 get mctrl : \n");
++
++	status = UART_GET_MSR(port);
++	if (status & UART_MSR_DCD)
++		result |= TIOCM_CAR;
++	if (status & UART_MSR_DSR)
++		result |= TIOCM_DSR;
++	if (status & UART_MSR_CTS)
++		result |= TIOCM_CTS;
++	if (status & UART_MSR_RI)
++		result |= TIOCM_RI;
++
++	return result;
++}
++
++static void it8712_set_mctrl_null(struct uart_port *port, u_int mctrl)
++{
++}
++
++static void it8712_break_ctl(struct uart_port *port, int break_state)
++{
++	unsigned int lcr;
++
++//        printk("it8712 break ctl : \n");
++
++	lcr = UART_GET_LCR(port);
++	if (break_state == -1)
++		lcr |= UART_LCR_SBC;
++	else
++		lcr &= ~UART_LCR_SBC;
++	UART_PUT_LCR(port, lcr);
++}
++
++static inline u_int uart_calculate_quot(struct uart_info *info, u_int baud)
++{
++	u_int quot;
++
++	/* Special case: B0 rate */
++	if (!baud)
++		baud = 9600;
++
++	quot = (info->port->uartclk/(16 * baud)) ;
++
++	return quot;
++}
++static void it8712_change_speed(struct uart_port *port, u_int cflag, u_int iflag, u_int quot)
++{
++	u_int uart_mc=0, old_ier;
++	unsigned long flags;
++
++#ifdef DEBUG
++	printk("it8712_set_cflag(0x%x) called\n", cflag);
++#endif
++
++
++	/* byte size and parity */
++	switch (cflag & CSIZE) {
++	case CS5: uart_mc = UART_LCR_WLEN5; break;
++	case CS6: uart_mc = UART_LCR_WLEN6; break;
++	case CS7: uart_mc = UART_LCR_WLEN7; break;
++	default:  uart_mc = UART_LCR_WLEN8; break; // CS8
++	}
++	if (cflag & CSTOPB)
++		uart_mc|= UART_LCR_STOP;
++	if (cflag & PARENB) {
++		uart_mc |= UART_LCR_EVEN;
++		if (!(cflag & PARODD))
++			uart_mc |= UART_LCR_ODD;
++	}
++
++	port->read_status_mask = UART_LSR_OE;
++	if (iflag & INPCK)
++		port->read_status_mask |= UART_LSR_FE | UART_LSR_PE;
++	if (iflag & (BRKINT | PARMRK))
++		port->read_status_mask |= UART_LSR_BI;
++
++	/*
++	 * Characters to ignore
++	 */
++	port->ignore_status_mask = 0;
++	if (iflag & IGNPAR)
++		port->ignore_status_mask |= UART_LSR_FE | UART_LSR_PE;
++	if (iflag & IGNBRK) {
++		port->ignore_status_mask |= UART_LSR_BI;
++		/*
++		 * If we're ignoring parity and break indicators,
++		 * ignore overruns to (for real raw support).
++		 */
++		if (iflag & IGNPAR)
++			port->ignore_status_mask |= UART_LSR_OE;
++	}
++
++	/* first, disable everything */
++	save_flags(flags); cli();
++	old_ier = UART_GET_IER(port);
++
++	if ((port->flags & ASYNC_HARDPPS_CD) ||
++	    (cflag & CRTSCTS) || !(cflag & CLOCAL))
++		old_ier |= UART_IER_MSI;
++
++	/* Set baud rate */
++	quot = quot / 13;
++	UART_PUT_LCR(port, UART_LCR_DLAB);
++	UART_PUT_DIV_LO(port, (quot & 0xff));
++	UART_PUT_DIV_HI(port, ((quot & 0xf00) >> 8));
++
++	UART_PUT_LCR(port, uart_mc);
++//	UART_PUT_LCR(port, 0x07); // ???? it is wired
++        UART_PUT_MCR(port, 0x08);
++        UART_PUT_FCR(port, 0x01);
++	UART_PUT_IER(port, 0x05);
++
++	restore_flags(flags);
++}
++
++static int it8712_startup(struct uart_port *port, struct uart_info *info)
++{
++	int retval;
++	unsigned int regs;
++
++//        printk("it8712 startup : \n");
++
++	/*
++	 * Use iobase to store a pointer to info. We need this to start a
++	 * transmission as the tranmittr interrupt is only generated on
++	 * the transition to the idle state
++	 */
++
++	port->iobase=(u_int)info;
++
++	/*
++	 * Allocate the IRQ
++	 */
++	retval = request_irq(port->irq, it8712_int, SA_INTERRUPT, "it8712", info);
++	if (retval)
++		return retval;
++
++        /* setup interrupt controller  */
++        regs = *((volatile unsigned int *)IRQ_TMODE(IO_ADDRESS(SL2312_INTERRUPT_BASE)));
++        regs |= (IRQ_SERIRQ0_MASK);
++        *((volatile unsigned int *)IRQ_TMODE(IO_ADDRESS(SL2312_INTERRUPT_BASE))) = regs;
++        regs = *((volatile unsigned int *)IRQ_LEVEL(IO_ADDRESS(SL2312_INTERRUPT_BASE)));
++        regs &= ~(IRQ_SERIRQ0_MASK);
++        *((volatile unsigned int *)IRQ_LEVEL(IO_ADDRESS(SL2312_INTERRUPT_BASE))) = regs;
++        *((volatile unsigned int *)IRQ_MASK(IO_ADDRESS(SL2312_INTERRUPT_BASE))) |= (unsigned int)(IRQ_SERIRQ0_MASK);
++
++	/*
++	 * Finally, enable interrupts. Use the TII interrupt to minimise
++	 * the number of interrupts generated. If higher performance is
++	 * needed, consider using the TI interrupt with a suitable FIFO
++	 * threshold
++	 */
++	UART_PUT_IER(port, (UART_IER_RDI|UART_IER_THRI));
++
++	return 0;
++}
++
++static void it8712_shutdown(struct uart_port *port, struct uart_info *info)
++{
++//        printk("it8712 shutdown : \n");
++
++	/*
++	 * disable all interrupts, disable the port
++	 */
++	UART_PUT_IER(port, 0x0);
++
++	/* disable break condition and fifos */
++//	UART_PUT_MCR(port, (UART_GET_MCR(port)&UART_MCR_MASK));
++
++	/*
++	 * Free the interrupt
++	 */
++	free_irq(port->irq, info);
++}
++
++static const char *it8712_type(struct uart_port *port)
++{
++	return port->type == PORT_IT8712 ? "IT8712" : NULL;
++}
++
++/*
++ * Release the memory region(s) being used by 'port'
++ */
++static void it8712_release_port(struct uart_port *port)
++{
++//        printk("it8712 release port : \n");
++
++	release_mem_region(port->mapbase, UART_PORT_SIZE);
++}
++
++/*
++ * Request the memory region(s) being used by 'port'
++ */
++static int it8712_request_port(struct uart_port *port)
++{
++	return request_mem_region(port->mapbase, UART_PORT_SIZE,
++				    "serial_it8712") != NULL ? 0 : -EBUSY;
++}
++
++/*
++ * Configure/autoconfigure the port.
++ */
++static void it8712_config_port(struct uart_port *port, int flags)
++{
++
++	if (flags & UART_CONFIG_TYPE) {
++		if (it8712_request_port(port) == 0)
++			port->type = PORT_IT8712;
++	}
++}
++
++/*
++ * verify the new serial_struct (for TIOCSSERIAL).
++ */
++static int it8712_verify_port(struct uart_port *port, struct serial_struct *ser)
++{
++	int ret = 0;
++
++	if (ser->type != PORT_UNKNOWN && ser->type != PORT_UART00)
++		ret = -EINVAL;
++	if (ser->irq < 0 || ser->irq >= NR_IRQS)
++		ret = -EINVAL;
++	if (ser->baud_base < 9600)
++		ret = -EINVAL;
++	return ret;
++}
++
++static struct uart_ops it8712_pops = {
++	tx_empty:	it8712_tx_empty,
++	set_mctrl:	it8712_set_mctrl_null,
++	get_mctrl:	it8712_get_mctrl,
++	stop_tx:	it8712_stop_tx,
++	start_tx:	it8712_start_tx,
++	stop_rx:	it8712_stop_rx,
++	enable_ms:	it8712_enable_ms,
++	break_ctl:	it8712_break_ctl,
++	startup:	it8712_startup,
++	shutdown:	it8712_shutdown,
++	change_speed:	it8712_change_speed,
++	type:		it8712_type,
++	release_port:	it8712_release_port,
++	request_port:	it8712_request_port,
++	config_port:	it8712_config_port,
++	verify_port:	it8712_verify_port,
++};
++
++#ifdef CONFIG_ARCH_SL2312
++
++static struct uart_port it8712_ports[UART_NR] = {
++	{
++		membase:	(void *)0,
++		mapbase:	0,
++		iotype:		SERIAL_IO_MEM,
++		irq:		0,
++		uartclk:	UART_CLK/2,
++		fifosize:	16,
++		ops:		&it8712_pops,
++		flags:		ASYNC_BOOT_AUTOCONF,
++	}
++};
++
++#endif
++
++#ifdef CONFIG_SERIAL_IT8712_CONSOLE
++#ifdef used_and_not_const_char_pointer
++static int it8712_console_read(struct uart_port *port, char *s, u_int count)
++{
++	unsigned int status;
++	int c;
++#ifdef DEBUG
++	printk("it8712_console_read() called\n");
++#endif
++
++	c = 0;
++	while (c < count) {
++		status = UART_GET_LSR(port);
++ 		if (UART_RX_DATA(status)) {
++			*s++ = UART_GET_CHAR(port);
++			c++;
++		} else {
++			// nothing more to get, return
++			return c;
++		}
++	}
++	// return the count
++	return c;
++}
++#endif
++static void it8712_console_write(struct console *co, const char *s, unsigned count)
++{
++#ifdef CONFIG_ARCH_SL2312
++	struct uart_port *port = it8712_ports + co->index;
++	unsigned int status, old_ies;
++	int i;
++
++	/*
++	 *	First save the CR then disable the interrupts
++	 */
++	old_ies = UART_GET_IER(port);
++	UART_PUT_IER(port,0x0);
++
++	/*
++	 *	Now, do each character
++	 */
++	for (i = 0; i < count; i++) {
++		do {
++			status = UART_GET_LSR(port);
++		} while (!UART_TX_READY(status));
++		UART_PUT_CHAR(port, s[i]);
++		if (s[i] == '\n') {
++			do {
++				status = UART_GET_LSR(port);
++			} while (!UART_TX_READY(status));
++			UART_PUT_CHAR(port, '\r');
++		}
++	}
++
++	/*
++	 *	Finally, wait for transmitter to become empty
++	 *	and restore the IES
++	 */
++	do {
++		status = UART_GET_LSR(port);
++	} while (!(status&UART_LSR_THRE));
++	UART_PUT_IER(port, old_ies);
++#endif
++}
++
++static kdev_t it8712_console_device(struct console *co)
++{
++	return MKDEV(SERIAL_IT8712_MAJOR, SERIAL_IT8712_MINOR + co->index);
++}
++
++static int it8712_console_wait_key(struct console *co)
++{
++#ifdef CONFIG_ARCH_SL2312
++	struct uart_port *port = (it8712_ports + co->index);
++	unsigned int status;
++
++	do {
++		status = UART_GET_LSR(port);
++	} while (!UART_RX_DATA(status));
++	return UART_GET_CHAR(port);
++#else
++	return 0;
++#endif
++}
++
++static void /*__init*/ it8712_console_get_options(struct uart_port *port, int *baud, int *parity, int *bits)
++{
++	printk("it8712 console get options : \n");
++
++	u_int uart_mc, quot;
++	uart_mc= UART_GET_MCR(port);
++
++	*parity = 'n';
++	if (uart_mc & UART_LCR_PARITY) {
++		if (uart_mc & UART_LCR_EVEN)
++			*parity = 'e';
++		else
++			*parity = 'o';
++	}
++
++	switch (uart_mc & UART_LCR_MSK){
++
++	case UART_LCR_WLEN5:
++		*bits = 5;
++		break;
++	case UART_LCR_WLEN6:
++		*bits = 6;
++		break;
++	case UART_LCR_WLEN7:
++		*bits = 7;
++		break;
++	case UART_LCR_WLEN8:
++		*bits = 8;
++		break;
++	}
++	UART_PUT_MCR(port,UART_LCR_DLAB);
++	quot = UART_GET_DIV_LO(port) | (UART_GET_DIV_HI(port) << 8);
++	UART_PUT_MCR(port,uart_mc);
++	*baud = (port->uartclk / (16 *quot));
++}
++
++static int __init it8712_console_setup(struct console *co, char *options)
++{
++	struct uart_port *port;
++	int baud = 38400;
++	int bits = 8;
++	int parity = 'n';
++	int flow= 'n';
++	int base, irq;
++	int i ;
++
++//	printk("it8712 console setup : \n");
++
++	LPCSetConfig(0, 0x02, 0x01);
++        LPCSetConfig(LDN_SERIAL1, 0x30, 0x1);
++        LPCSetConfig(LDN_SERIAL1, 0x23, 0x0);
++	base = IT8712_IO_BASE;
++	base += ((LPCGetConfig(LDN_SERIAL1, 0x60) << 8) + LPCGetConfig(LDN_SERIAL1, 0x61));
++	it8712_ports[0].mapbase = base;
++	it8712_ports[0].membase = IO_ADDRESS(base);
++	it8712_ports[0].irq = IRQ_SERIRQ0_OFFSET;
++       	irq = LPCGetConfig(LDN_SERIAL1, 0x70);
++	it8712_ports[0].irq += irq;
++
++	printk("it8712 irq is %x %x \n", it8712_ports[0].irq, irq);
++
++	// setup LPC Host 'quiet mode'
++	*((volatile unsigned int *)IO_ADDRESS((SL2312_LPC_HOST_BASE+0x04))) |= LPC_HOST_CONTINUE_MODE ;
++	for(i=0;i<1000;i++) ;						// delay
++	*((volatile unsigned int *)IO_ADDRESS((SL2312_LPC_HOST_BASE+0x04))) &= ~(LPC_HOST_CONTINUE_MODE) ;
++
++#ifdef CONFIG_ARCH_SL2312
++	/*
++	 * Check whether an invalid uart number has been specified, and
++	 * if so, search for the first available port that does have
++	 * console support.
++	 */
++	port = uart_get_console(it8712_ports,IT8712_NO_PORTS,co);
++#else
++	return -ENODEV;
++#endif
++
++	if (options)
++		uart_parse_options(options, &baud, &parity, &bits, &flow);
++	else
++		it8712_console_get_options(port, &baud, &parity, &bits);
++
++	return uart_set_options(port, co, baud, parity, bits, flow);
++}
++
++static struct console it8712_console = {
++	name:           SERIAL_IT8712_NAME,
++	write:		it8712_console_write,
++#ifdef used_and_not_const_char_pointer
++	read:		it8712_console_read,
++#endif
++	device:		it8712_console_device,
++//	wait_key:	it8712_console_wait_key,
++	setup:		it8712_console_setup,
++	flags:		(CON_PRINTBUFFER|CON_ENABLED),
++	index:		-1,
++};
++
++void __init it8712_console_init(void)
++{
++	register_console(&it8712_console);
++}
++
++#define IT8712_CONSOLE	&it8712_console
++#else
++#define IT8712_CONSOLE	NULL
++#endif
++
++static struct uart_driver it8712_reg = {
++	owner:                  NULL,
++	normal_major:		SERIAL_IT8712_MAJOR,
++	normal_name:		SERIAL_IT8712_NAME,
++	normal_driver:		&normal,
++	callout_major:		CALLOUT_IT8712_MAJOR,
++	callout_name:		CALLOUT_IT8712_NAME,
++	callout_driver:		&callout,
++	table:			it8712_table,
++	termios:		it8712_termios,
++	termios_locked:		it8712_termios_locked,
++	minor:			SERIAL_IT8712_MINOR,
++	nr:			UART_NR,
++#ifdef CONFIG_ARCH_SL2312
++	port:			it8712_ports,
++#endif
++	state:			NULL,
++	cons:			IT8712_CONSOLE,
++};
++
++static int __init it8712_init(void)
++{
++//	printk("serial_it8712: it871212_init \n");
++
++	return uart_register_driver(&it8712_reg);
++}
++
++
++__initcall(it8712_init);
+--- /dev/null
++++ b/drivers/serial/serial_sl2312.c
+@@ -0,0 +1,827 @@
++/*
++ *  linux/drivers/char/serial_uart00.c
++ *
++ *  Driver for UART00 serial ports
++ *
++ *  Based on drivers/char/serial_amba.c, by ARM Limited &
++ *                                          Deep Blue Solutions Ltd.
++ *  Copyright 2001 Altera Corporation
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
++ *
++ *  $Id: serial_sl2312.c,v 1.1.1.1 2006/04/03 08:41:00 amos_lee Exp $
++ *
++ */
++#include 
++
++#include 
++#include 
++#include 
++#include 
++#include 
++#include 
++#include 
++#include 
++#include 
++#include 
++#include 
++#include 
++#include 
++#include 
++#include 
++#include 
++#include 
++#include 
++#include 
++
++#include 
++#include 
++#include 
++#include 
++#include 
++#include 
++#include 
++#include 
++#include 
++
++
++#if defined(CONFIG_SERIAL_SL2312_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
++#define SUPPORT_SYSRQ
++#endif
++
++#include 
++#define UART_TYPE (volatile unsigned int*)
++#include 
++#include 
++
++// #define DEBUG           1
++#define UART_NR		1
++
++
++#define SERIAL_SL2312_NAME	"ttyS"
++#define SERIAL_SL2312_MAJOR	204
++#define SERIAL_SL2312_MINOR	40      /* Temporary - will change in future */
++#define SERIAL_SL2312_NR	UART_NR
++#define UART_PORT_SIZE 0x50
++
++#define SL2312_NO_PORTS         UART_NR
++#define SL2312_ISR_PASS_LIMIT	256
++
++/*
++ * Access macros for the SL2312 UARTs
++ */
++#define UART_GET_INT_STATUS(p)	(inl(UART_IIR((p)->membase)) & 0x0F)      // interrupt identification
++#define UART_PUT_IER(p, c)      outl(c,UART_IER((p)->membase))    // interrupt enable
++#define UART_GET_IER(p)         inl(UART_IER((p)->membase))
++#define UART_PUT_CHAR(p, c)     outl(c,UART_THR((p)->membase))    // transmitter holding
++#define UART_GET_CHAR(p)        inl(UART_RBR((p)->membase))       // receive buffer
++#define UART_GET_LSR(p)         inl(UART_LSR((p)->membase))       // line status
++#define UART_GET_MSR(p)         inl(UART_MSR((p)->membase))       // modem status
++#define UART_GET_MCR(p)         inl(UART_MCR((p)->membase))       // modem control
++#define UART_PUT_MCR(p, c)      outl(c,UART_MCR((p)->membase))
++#define UART_GET_LCR(p)         inl(UART_LCR((p)->membase))       // mode control
++#define UART_PUT_LCR(p, c)      outl(c,UART_LCR((p)->membase))
++#define UART_GET_DIV_HI(p)	inl(UART_DIV_HI((p)->membase))
++#define UART_PUT_DIV_HI(p, c)	outl(c,UART_DIV_HI((p)->membase))
++#define UART_GET_DIV_LO(p)	inl(UART_DIV_LO((p)->membase))
++#define UART_PUT_DIV_LO(p, c)	outl(c,UART_DIV_LO((p)->membase))
++#define UART_PUT_MDR(p, c)      outl(c,UART_MDR((p)->membase))
++#define UART_RX_DATA(s)		((s) & UART_LSR_DR)
++#define UART_TX_READY(s)	((s) & UART_LSR_THRE)
++
++
++static void sl2312_stop_tx(struct uart_port *port)
++{
++        unsigned int reg;
++
++//        printk("sl2312 stop tx : \n");
++        reg = UART_GET_IER(port);
++        reg &= ~(UART_IER_TE);
++	UART_PUT_IER(port, reg);
++}
++
++static void sl2312_stop_rx(struct uart_port *port)
++{
++        unsigned int reg;
++
++//        printk("sl2312 stop rx : \n");
++        reg = UART_GET_IER(port);
++        reg &= ~(UART_IER_DR);
++	UART_PUT_IER(port, reg);
++
++}
++
++static void sl2312_enable_ms(struct uart_port *port)
++{
++        unsigned int reg;
++
++//        printk("sl2312 enable ms : \n");
++
++        reg = UART_GET_IER(port);
++        reg |= (UART_IER_MS);
++	UART_PUT_IER(port, reg);
++
++}
++
++static void
++sl2312_rx_chars(struct uart_port *port)
++{
++	struct tty_struct *tty = port->info->tty;
++	unsigned int status, mask, ch, flg, ignored = 0;
++
++
++ //       printk("sl2312_rx_chars : \n");
++	status = UART_GET_LSR(port);
++	while (UART_RX_DATA(status)) {
++
++		/*
++		 * We need to read rds before reading the
++		 * character from the fifo
++		 */
++		ch = UART_GET_CHAR(port);
++		port->icount.rx++;
++
++		//if (tty->flip.count >= TTY_FLIPBUF_SIZE)
++		if (tty && !tty_buffer_request_room(tty, 1))
++			goto ignore_char;
++
++		flg = TTY_NORMAL;
++
++		/*
++		 * Note that the error handling code is
++		 * out of the main execution path
++		 */
++
++		if (status & (UART_LSR_OE|UART_LSR_PE|UART_LSR_FE|UART_LSR_BI|UART_LSR_DE))
++			goto handle_error;
++		if (uart_handle_sysrq_char(port, ch))
++			goto ignore_char;
++
++	error_return:
++		//*tty->flip.flag_buf_ptr++ = flg;
++		//*tty->flip.char_buf_ptr++ = ch;
++		//tty->flip.count++;
++		tty_insert_flip_char(tty, ch, flg);
++	ignore_char:
++		status = UART_GET_LSR(port);
++	} // end of while
++out:
++	tty_flip_buffer_push(tty);
++	return;
++
++handle_error:
++	if (status & UART_LSR_BI) {
++		status &= ~(UART_LSR_FE);
++		port->icount.brk++;
++
++#ifdef SUPPORT_SYSRQ
++		if (uart_handle_break(port))
++			goto ignore_char;
++#endif
++	} else if (status & UART_LSR_PE)
++		port->icount.parity++;
++	else if (status & UART_LSR_FE)
++		port->icount.frame++;
++
++	if (status & UART_LSR_OE)
++		port->icount.overrun++;
++
++	if (status & port->ignore_status_mask) {
++		if (++ignored > 100)
++			goto out;
++		goto ignore_char;
++	}
++
++	mask = status & port->read_status_mask;
++
++	if (mask & UART_LSR_BI)
++		flg = TTY_BREAK;
++	else if (mask & UART_LSR_PE)
++		flg = TTY_PARITY;
++	else if (mask & UART_LSR_FE)
++		flg = TTY_FRAME;
++
++	if (status & UART_LSR_OE) {
++		/*
++		 * CHECK: does overrun affect the current character?
++		 * ASSUMPTION: it does not.
++		 */
++		//*tty->flip.flag_buf_ptr++ = flg;
++		//*tty->flip.char_buf_ptr++ = ch;
++		//tty->flip.count++;
++
++		tty_insert_flip_char(tty, 0, TTY_BREAK);
++
++		// if (tty->flip.count >= TTY_FLIPBUF_SIZE)
++		if (tty_buffer_request_room(tty, 1))
++			goto ignore_char;
++		ch = 0;
++		flg = TTY_OVERRUN;
++	}
++#ifdef SUPPORT_SYSRQ
++	port->sysrq = 0;
++#endif
++	goto error_return;
++}
++
++static void sl2312_tx_chars(struct uart_port *port)
++{
++	struct circ_buf *xmit = &port->info->xmit;
++	int count;
++
++
++	if (port->x_char) {
++		while(!(UART_GET_LSR(port)&UART_LSR_THRE));
++		UART_PUT_CHAR(port, port->x_char);
++		port->icount.tx++;
++		port->x_char = 0;
++
++		return;
++	}
++	if (uart_circ_empty(xmit) || uart_tx_stopped(port)) {
++		sl2312_stop_tx(port);
++
++		return;
++	}
++
++	count = port->fifosize >> 1;
++	do {
++		while(!(UART_GET_LSR(port)&UART_LSR_THRE));
++		UART_PUT_CHAR(port, xmit->buf[xmit->tail]);
++		xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
++		port->icount.tx++;
++		if (uart_circ_empty(xmit))
++			break;
++	} while (--count > 0);
++
++	if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
++		uart_write_wakeup(port);
++
++	if (uart_circ_empty(xmit))
++		sl2312_stop_tx(port);
++
++}
++
++static void sl2312_start_tx(struct uart_port *port)
++{
++        unsigned int reg;
++
++//        printk("sl2312 start tx : \n");
++        reg = UART_GET_IER(port);
++        reg |= (UART_IER_TE);
++	UART_PUT_IER(port, reg);
++
++	sl2312_tx_chars(port);
++}
++
++static void sl2312_modem_status(struct uart_port *port)
++{
++	unsigned int status;
++
++//        printk("it8712 modem status : \n");
++
++	status = UART_GET_MSR(port);
++
++	if (!(status & (UART_MSR_DCTS | UART_MSR_DDSR |
++		       UART_MSR_TERI | UART_MSR_DDCD)))
++		return;
++
++        if (status & UART_MSR_DDCD)
++                uart_handle_dcd_change(port, status & UART_MSR_DCD);
++
++        if (status & UART_MSR_DDSR)
++                port->icount.dsr++;
++
++        if (status & UART_MSR_DCTS)
++                uart_handle_cts_change(port, status & UART_MSR_CTS);
++
++	wake_up_interruptible(&port->info->delta_msr_wait);
++
++}
++
++static irqreturn_t sl2312_int(int irq, void *dev_id)
++{
++	struct uart_port *port = dev_id;
++	unsigned int status, pass_counter = 0;
++
++	status = UART_GET_INT_STATUS(port);
++	do {
++		switch(status)
++		{
++		   case UART_IIR_DR:
++		   case UART_IIR_RLS:
++			sl2312_rx_chars(port);
++		   break;
++		   case UART_IIR_TE:
++			sl2312_tx_chars(port);
++		   break;
++		   case UART_IIR_MODEM:
++			sl2312_modem_status(port);
++		   break;
++		   default:
++		   break;
++		}
++		if (pass_counter++ > SL2312_ISR_PASS_LIMIT)
++			break;
++
++		status = UART_GET_INT_STATUS(port);
++	} while (status);
++
++	return IRQ_HANDLED;
++}
++
++static u_int sl2312_tx_empty(struct uart_port *port)
++{
++//        printk("sl2312 tx empty : \n");
++
++	return ((UART_GET_LSR(port) & UART_LSR_TE)? TIOCSER_TEMT : 0);
++}
++
++static u_int sl2312_get_mctrl(struct uart_port *port)
++{
++	unsigned int result = 0;
++	unsigned int status;
++
++//        printk("sl2312 get mctrl : \n");
++
++	status = UART_GET_MSR(port);
++	if (status & UART_MSR_DCD)
++		result |= TIOCM_CAR;
++	if (status & UART_MSR_DSR)
++		result |= TIOCM_DSR;
++	if (status & UART_MSR_CTS)
++		result |= TIOCM_CTS;
++	if (status & UART_MSR_RI)
++		result |= TIOCM_RI;
++
++	return result;
++}
++
++static void sl2312_set_mctrl_null(struct uart_port *port, u_int mctrl)
++{
++}
++
++static void sl2312_break_ctl(struct uart_port *port, int break_state)
++{
++	unsigned int lcr;
++
++//        printk("sl2312 break ctl : \n");
++
++	lcr = UART_GET_LCR(port);
++	if (break_state == -1)
++		lcr |= UART_LCR_SETBREAK;
++	else
++		lcr &= ~UART_LCR_SETBREAK;
++	UART_PUT_LCR(port, lcr);
++}
++
++static inline u_int uart_calculate_quot(struct uart_port *port, u_int baud)
++{
++	u_int quot;
++
++	/* Special case: B0 rate */
++	if (!baud)
++		baud = 9600;
++
++	quot = (port->uartclk / (16 * baud)-1)  ;
++
++	return quot;
++}
++
++static void sl2312_set_termios(struct uart_port *port, struct ktermios *termios,
++                               struct ktermios *old)
++{
++	unsigned int  uart_mc, old_ier, baud, quot;
++	unsigned long flags;
++
++        termios->c_cflag |= CREAD;
++#ifdef DEBUG
++	printk("it8712_set_cflag(0x%x) called\n", cflag);
++#endif
++        baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16);
++        quot = (port->uartclk / (16 * baud))  ;
++        //uart_get_divisor(port, baud);
++
++	/* byte size and parity */
++	switch (termios->c_cflag & CSIZE) {
++	case CS5:
++              uart_mc = UART_LCR_LEN5;
++              break;
++	case CS6:
++              uart_mc = UART_LCR_LEN6;
++              break;
++	case CS7:
++              uart_mc = UART_LCR_LEN7;
++              break;
++	default: // CS8
++              uart_mc = UART_LCR_LEN8;
++              break;
++	}
++
++	if (termios->c_cflag & CSTOPB)
++		uart_mc|= UART_LCR_STOP;
++	if (termios->c_cflag & PARENB) {
++		uart_mc |= UART_LCR_EVEN;
++		if (!(termios->c_cflag & PARODD))
++			uart_mc |= UART_LCR_ODD;
++	}
++
++    spin_lock_irqsave(&port->lock, flags);
++        /*
++         * Update the per-port timeout
++         */
++        uart_update_timeout(port, termios->c_cflag, baud);
++	port->read_status_mask = UART_LSR_OE;
++	if (termios->c_iflag & INPCK)
++		port->read_status_mask |= UART_LSR_FE | UART_LSR_PE;
++	if (termios->c_iflag & (BRKINT | PARMRK))
++		port->read_status_mask |= UART_LSR_BI;
++
++	/*
++	 * Characters to ignore
++	 */
++	port->ignore_status_mask = 0;
++	if (termios->c_iflag & IGNPAR)
++		port->ignore_status_mask |= UART_LSR_FE | UART_LSR_PE;
++	if (termios->c_iflag & IGNBRK) {
++		port->ignore_status_mask |= UART_LSR_BI;
++		/*
++		 * If we're ignoring parity and break indicators,
++		 * ignore overruns to (for real raw support).
++		 */
++		if (termios->c_iflag & IGNPAR)
++			port->ignore_status_mask |= UART_LSR_OE;
++	}
++
++	//save_flags(flags); cli();
++	old_ier = UART_GET_IER(port);
++
++        if(UART_ENABLE_MS(port, termios->c_cflag))
++             old_ier |= UART_IER_MS;
++
++	/* Set baud rate */
++	UART_PUT_LCR(port, UART_LCR_DLAB);
++	UART_PUT_DIV_LO(port, (quot & 0xff));
++	UART_PUT_DIV_HI(port, ((quot & 0xf00) >> 8));
++
++	UART_PUT_LCR(port, uart_mc);
++	UART_PUT_IER(port, old_ier);
++
++	//restore_flags(flags);
++	spin_unlock_irqrestore(&port->lock, flags);
++}
++
++
++
++static int sl2312_startup(struct uart_port *port)
++{
++	int retval;
++	unsigned int regs;
++
++//        printk("sl2312 startup : \n");
++
++	/*
++	 * Use iobase to store a pointer to info. We need this to start a
++	 * transmission as the tranmittr interrupt is only generated on
++	 * the transition to the idle state
++	 */
++
++	/*
++	 * Allocate the IRQ
++	 */
++	retval = request_irq(port->irq, sl2312_int, IRQF_DISABLED, "sl2312", port);
++	if (retval)
++		return retval;
++
++        /* setup interrupt controller  */
++        regs = *((volatile unsigned int *)IRQ_TMODE(IO_ADDRESS(SL2312_INTERRUPT_BASE)));
++        regs &= ~(IRQ_UART_MASK);
++        *((volatile unsigned int *)IRQ_TMODE(IO_ADDRESS(SL2312_INTERRUPT_BASE))) = regs;
++        regs = *((volatile unsigned int *)IRQ_TLEVEL(IO_ADDRESS(SL2312_INTERRUPT_BASE)));
++        regs &= ~(IRQ_UART_MASK);
++        *((volatile unsigned int *)IRQ_TLEVEL(IO_ADDRESS(SL2312_INTERRUPT_BASE))) = regs;
++        *((volatile unsigned int *)IRQ_MASK(IO_ADDRESS(SL2312_INTERRUPT_BASE))) |= (unsigned int)(IRQ_UART_MASK);
++
++	/*
++	 * Finally, enable interrupts. Use the TII interrupt to minimise
++	 * the number of interrupts generated. If higher performance is
++	 * needed, consider using the TI interrupt with a suitable FIFO
++	 * threshold
++	 */
++	UART_PUT_IER(port, (UART_IER_DR|UART_IER_TE));
++
++	return 0;
++}
++
++static void sl2312_shutdown(struct uart_port *port)
++{
++//        printk("sl2312 shutdown : \n");
++
++	/*
++	 * disable all interrupts, disable the port
++	 */
++	UART_PUT_IER(port, 0x0);
++
++	/* disable break condition and fifos */
++//	UART_PUT_MCR(port, (UART_GET_MCR(port)&UART_MCR_MASK));
++
++	/*
++	 * Free the interrupt
++	 */
++	free_irq(port->irq, port);
++}
++
++static const char *sl2312_type(struct uart_port *port)
++{
++	return port->type == PORT_SL2312 ? "SL2312" : NULL;
++}
++
++/*
++ * Release the memory region(s) being used by 'port'
++ */
++static void sl2312_release_port(struct uart_port *port)
++{
++//        printk("sl2312 release port : \n");
++
++	release_mem_region(port->mapbase, UART_PORT_SIZE);
++}
++
++/*
++ * Request the memory region(s) being used by 'port'
++ */
++static int sl2312_request_port(struct uart_port *port)
++{
++	return request_mem_region(port->mapbase, UART_PORT_SIZE,
++				    "serial_sl2312") != NULL ? 0 : -EBUSY;
++}
++
++/*
++ * Configure/autoconfigure the port.
++ */
++static void sl2312_config_port(struct uart_port *port, int flags)
++{
++
++	if (flags & UART_CONFIG_TYPE) {
++		if (sl2312_request_port(port) == 0)
++			port->type = PORT_SL2312;
++	}
++}
++
++/*
++ * verify the new serial_struct (for TIOCSSERIAL).
++ */
++static int sl2312_verify_port(struct uart_port *port, struct serial_struct *ser)
++{
++	int ret = 0;
++
++	if (ser->type != PORT_UNKNOWN && ser->type != PORT_UART00)
++		ret = -EINVAL;
++	if (ser->irq < 0 || ser->irq >= NR_IRQS)
++		ret = -EINVAL;
++	if (ser->baud_base < 9600)
++		ret = -EINVAL;
++	return ret;
++}
++
++static struct uart_ops sl2312_pops = {
++	.tx_empty		=sl2312_tx_empty,
++	.set_mctrl		=sl2312_set_mctrl_null,
++	.get_mctrl		=sl2312_get_mctrl,
++	.stop_tx		=sl2312_stop_tx,
++	.start_tx		=sl2312_start_tx,
++	.stop_rx		=sl2312_stop_rx,
++	.enable_ms		=sl2312_enable_ms,
++	.break_ctl		=sl2312_break_ctl,
++	.startup		=sl2312_startup,
++	.shutdown		=sl2312_shutdown,
++	.set_termios	=sl2312_set_termios,
++	.type			=sl2312_type,
++	.release_port	=sl2312_release_port,
++	.request_port	=sl2312_request_port,
++	.config_port	=sl2312_config_port,
++	.verify_port	=sl2312_verify_port,
++};
++
++#ifdef CONFIG_ARCH_SL2312
++
++static struct uart_port sl2312_ports[UART_NR] = {
++	{
++		membase:	(void *)IO_ADDRESS(SL2312_UART_BASE),
++		mapbase:	SL2312_UART_BASE,
++		iotype:		SERIAL_IO_MEM,
++		irq:		IRQ_UART,
++		uartclk:	UART_CLK,
++		fifosize:	16,
++		ops:		&sl2312_pops,
++		flags:		ASYNC_BOOT_AUTOCONF,
++	}
++};
++
++#endif
++
++#ifdef CONFIG_SERIAL_SL2312_CONSOLE
++#ifdef used_and_not_const_char_pointer
++static int sl2312_console_read(struct uart_port *port, char *s, u_int count)
++{
++	unsigned int status;
++	int c;
++#ifdef DEBUG
++	printk("sl2312_console_read() called\n");
++#endif
++
++	c = 0;
++	while (c < count) {
++		status = UART_GET_LSR(port);
++ 		if (UART_RX_DATA(status)) {
++			*s++ = UART_GET_CHAR(port);
++			c++;
++		} else {
++			// nothing more to get, return
++			return c;
++		}
++	}
++	// return the count
++	return c;
++}
++#endif
++static void sl2312_console_write(struct console *co, const char *s, unsigned count)
++{
++#ifdef CONFIG_ARCH_SL2312
++	struct uart_port *port = sl2312_ports + co->index;
++	unsigned int status, old_ies;
++	int i;
++
++	/*
++	 *	First save the CR then disable the interrupts
++	 */
++	old_ies = UART_GET_IER(port);
++	UART_PUT_IER(port,0x0);
++
++	/*
++	 *	Now, do each character
++	 */
++	for (i = 0; i < count; i++) {
++		do {
++			status = UART_GET_LSR(port);
++		} while (!UART_TX_READY(status));
++		UART_PUT_CHAR(port, s[i]);
++		if (s[i] == '\n') {
++			do {
++				status = UART_GET_LSR(port);
++			} while (!UART_TX_READY(status));
++			UART_PUT_CHAR(port, '\r');
++		}
++	}
++
++	/*
++	 *	Finally, wait for transmitter to become empty
++	 *	and restore the IES
++	 */
++	do {
++		status = UART_GET_LSR(port);
++	} while (!(status&UART_LSR_TE));
++	UART_PUT_IER(port, old_ies);
++#endif
++}
++
++#if 0
++static void sl2312_console_device(struct console *co,int *index)
++{
++
++	struct uart_driver *p = co->data;
++    *index = co->index;
++    return p->tty_driver;
++
++}
++#endif
++
++static void /*__init*/ sl2312_console_get_options(struct uart_port *port, int *baud, int *parity, int *bits)
++{
++//	printk("sl2312 console get options : \n");
++
++	u_int uart_mc, quot;
++	uart_mc= UART_GET_MCR(port);
++
++	*parity = 'n';
++	if (uart_mc & UART_LCR_PE) {
++		if (uart_mc & UART_LCR_EVEN)
++			*parity = 'e';
++		else
++			*parity = 'o';
++	}
++
++	switch (uart_mc & UART_LCR_MSK){
++
++	case UART_LCR_LEN5:
++		*bits = 5;
++		break;
++	case UART_LCR_LEN6:
++		*bits = 6;
++		break;
++	case UART_LCR_LEN7:
++		*bits = 7;
++		break;
++	case UART_LCR_LEN8:
++		*bits = 8;
++		break;
++	}
++	UART_PUT_MCR(port,UART_LCR_DLAB);
++	quot = UART_GET_DIV_LO(port) | (UART_GET_DIV_HI(port) << 8);
++	UART_PUT_MCR(port,uart_mc);
++	*baud = port->uartclk / (16 *quot );
++}
++
++static int __init sl2312_console_setup(struct console *co, char *options)
++{
++	struct uart_port *port;
++	int baud = 19200;
++	int bits = 8;
++	int parity = 'n';
++	int flow= 'n';
++
++	printk("sl2312 console setup : \n");
++
++#ifdef CONFIG_ARCH_SL2312
++	/*
++	 * Check whether an invalid uart number has been specified, and
++	 * if so, search for the first available port that does have
++	 * console support.
++	 */
++	port = uart_get_console(sl2312_ports,SL2312_NO_PORTS,co);
++#else
++	return -ENODEV;
++#endif
++
++	if (options)
++		uart_parse_options(options, &baud, &parity, &bits, &flow);
++	else
++		sl2312_console_get_options(port, &baud, &parity, &bits);
++
++	return uart_set_options(port, co, baud, parity, bits, flow);
++}
++
++extern struct uart_driver sl2312_reg;
++static struct console sl2312_console = {
++	.name      = SERIAL_SL2312_NAME,
++	.write		= sl2312_console_write,
++	.device		= uart_console_device,
++//	.device		= sl2312_console_device,
++	.setup		= sl2312_console_setup,
++//	.flags		= (CON_PRINTBUFFER|CON_ENABLED),
++	.flags		= CON_PRINTBUFFER,
++	.index		= -1,
++	.data       = &sl2312_reg,
++};
++
++static int __init sl2312_console_init(void)
++{
++	register_console(&sl2312_console);
++	return 0;
++
++}
++
++console_initcall(sl2312_console_init);
++
++#define SL2312_CONSOLE	&sl2312_console
++#else
++#define SL2312_CONSOLE	NULL
++#endif
++
++// static
++struct uart_driver sl2312_reg = {
++	.owner         = NULL,
++	.driver_name	= SERIAL_SL2312_NAME,
++	.dev_name		= SERIAL_SL2312_NAME,
++	.major          = SERIAL_SL2312_MAJOR,
++	.minor			= SERIAL_SL2312_MINOR,
++	.nr				= UART_NR,
++	.cons			= SL2312_CONSOLE,
++};
++
++static int __init sl2312_init(void)
++{
++       int result;
++	//printk("serial_it8712: it871212_init \n");
++
++        result = uart_register_driver(&sl2312_reg);
++        if(result)
++             return result;
++	result = uart_add_one_port(&sl2312_reg, &sl2312_ports[0]);
++
++        return result;
++}
++
++
++__initcall(sl2312_init);
+--- a/include/linux/serial_core.h
++++ b/include/linux/serial_core.h
+@@ -147,6 +147,10 @@
+ #define PORT_SB1250_DUART	77
+ 
+ 
++/* Storlink Soc */
++#define PORT_SL2312     72
++#define PORT_IT8712     73
++
+ #ifdef __KERNEL__
+ 
+ #include 
+--- a/drivers/char/Makefile
++++ b/drivers/char/Makefile
+@@ -70,6 +70,16 @@
+ obj-$(CONFIG_APPLICOM)		+= applicom.o
+ obj-$(CONFIG_SONYPI)		+= sonypi.o
+ obj-$(CONFIG_RTC)		+= rtc.o
++
++###  for Storlink SoC ###
++obj-$(CONFIG_SL2312_RTC) += sl2312_rtc.o
++obj-$(CONFIG_IT8712_GPIO)   += it8712_gpio.o
++obj-$(CONFIG_GEMINI_GPIO)   += gemini_gpio.o
++obj-$(CONFIG_GEMINI_PWC) += gemini_pwr.o
++obj-$(CONFIG_GEMINI_CIR)    += gemini_cir.o
++obj-$(CONFIG_GEMINI_I2S)    += gemini_i2s.o
++obj-$(CONFIG_SL2312_WATCHDOG) += sl2312_wd.o
++
+ obj-$(CONFIG_HPET)		+= hpet.o
+ obj-$(CONFIG_GEN_RTC)		+= genrtc.o
+ obj-$(CONFIG_EFI_RTC)		+= efirtc.o
+--- a/drivers/serial/Kconfig
++++ b/drivers/serial/Kconfig
+@@ -280,6 +280,56 @@
+ 
+ comment "Non-8250 serial port support"
+ 
++config SERIAL_SL2312
++	bool "SL2312  serial port (sl2312) support"
++	depends on ARCH_SL2312
++	select SERIAL_CORE
++	select SERIAL_SL2312_CONSOLE
++	help
++         Say Y here if you want to use the hard logic uart on SWORD. This
++         driver also supports soft logic implentations of this uart core.
++
++config SERIAL_SL2312_CONSOLE
++	bool "Support for console on SL2312 serial port"
++	depends on SERIAL_SL2312
++	select SERIAL_CORE_CONSOLE
++	help
++        Say Y here if you want to support a serial console on an SWORD
++        hard logic uart or uart00 IP core.
++
++        Even if you say Y here, the currently visible virtual console
++        (/dev/tty0) will still be used as the system console by default, but
++        you can alter that using a kernel command line option such as
++        "console=ttyS0". (Try "man bootparam" or see the documentation of
++        your boot loader (lilo or loadlin) about how to pass options to the
++        kernel at boot time.)
++
++
++config SERIAL_IT8712
++	bool "Sl2312 serial port(IT8712) support"
++	depends on ARM && ARCH_SL2312 && SL2312_LPC
++	select SERIAL_CORE
++	select SERIAL_IT8712_CONSOLE
++	help
++	  Say Y here if you want to use the hard logic uart on Excalibur. This
++	  driver also supports soft logic implentations of this uart core.
++
++config SERIAL_IT8712_CONSOLE
++	bool "Support for console on Sword serial port(IT8712)"
++	depends on SERIAL_IT8712
++	select SERIAL_CORE_CONSOLE
++	help
++	  Say Y here if you want to support a serial console on an Excalibur
++	  hard logic uart or uart00 IP core.
++
++	  Even if you say Y here, the currently visible virtual console
++	  (/dev/tty0) will still be used as the system console by default, but
++	  you can alter that using a kernel command line option such as
++	  "console=ttySI0". (Try "man bootparam" or see the documentation of
++	  your boot loader (lilo or loadlin) about how to pass options to the
++	  kernel at boot time.)
++
++
+ config SERIAL_AMBA_PL010
+ 	tristate "ARM AMBA PL010 serial port support"
+ 	depends on ARM_AMBA && (BROKEN || !ARCH_VERSATILE)
+--- a/drivers/serial/Makefile
++++ b/drivers/serial/Makefile
+@@ -62,5 +62,7 @@
+ obj-$(CONFIG_SERIAL_ATMEL) += atmel_serial.o
+ obj-$(CONFIG_SERIAL_UARTLITE) += uartlite.o
+ obj-$(CONFIG_SERIAL_NETX) += netx-serial.o
++obj-$(CONFIG_SERIAL_IT8712) += it8712.o
++obj-$(CONFIG_SERIAL_SL2312) += serial_sl2312.o
+ obj-$(CONFIG_SERIAL_OF_PLATFORM) += of_serial.o
+ obj-$(CONFIG_SERIAL_KS8695) += serial_ks8695.o
diff --git a/target/linux/storm/patches/009-watchdog.patch b/target/linux/storm/patches/009-watchdog.patch
new file mode 100644
index 0000000000..3055a94822
--- /dev/null
+++ b/target/linux/storm/patches/009-watchdog.patch
@@ -0,0 +1,398 @@
+--- a/arch/arm/mach-sl2312/sl3516_device.c
++++ b/arch/arm/mach-sl2312/sl3516_device.c
+@@ -76,9 +76,30 @@
+ 	.resource       = sl3516_sata0_resources,
+ };
+ 
++static struct resource sl351x_wdt_resources[] = {
++	[0] = {
++		.start  = SL2312_WAQTCHDOG_BASE + 0x00,
++		.end    = SL2312_WAQTCHDOG_BASE + 0x1C,
++		.flags  = IORESOURCE_MEM,
++	},
++	[1] = {
++		.start  = IRQ_WATCHDOG,
++		.end    = IRQ_WATCHDOG,
++		.flags  = IORESOURCE_IRQ,
++	},
++};
++
++static struct platform_device sl351x_wdt = {
++	.name		= "sl351x-wdt",
++	.id		= -1,
++	.resource	= sl351x_wdt_resources,
++	.num_resources	= ARRAY_SIZE(sl351x_wdt_resources),
++};
++
+ static struct platform_device *sata_devices[] __initdata = {
+ 	&sata_device,
+ 	&sata0_device,
++	&sl351x_wdt,
+ };
+ 
+ static int __init sl3516_init(void)
+--- a/drivers/char/watchdog/Kconfig
++++ b/drivers/char/watchdog/Kconfig
+@@ -171,6 +171,17 @@
+ 	  To compile this driver as a module, choose M here: the
+ 	  module will be called ep93xx_wdt.
+ 
++config WATCHDOG_SL351X
++	tristate "SL351x Watchdog"
++	depends on WATCHDOG && ARCH_SL2312
++	help
++	  This driver adds watchdog support for the integrated watchdog in the
++	  SL351x processors (Farraday core). If you have one of these processors
++	  and wish to have watchdog support enabled, say Y, otherwise say N.
++
++	  To compile this driver as a module, choose M here: the
++	  module will be called sl351x_wdt.
++
+ config OMAP_WATCHDOG
+ 	tristate "OMAP Watchdog"
+ 	depends on ARCH_OMAP16XX || ARCH_OMAP24XX
+--- a/drivers/char/watchdog/Makefile
++++ b/drivers/char/watchdog/Makefile
+@@ -36,6 +36,7 @@
+ obj-$(CONFIG_SA1100_WATCHDOG) += sa1100_wdt.o
+ obj-$(CONFIG_MPCORE_WATCHDOG) += mpcore_wdt.o
+ obj-$(CONFIG_EP93XX_WATCHDOG) += ep93xx_wdt.o
++obj-$(CONFIG_WATCHDOG_SL351X) += sl351x_wdt.o
+ obj-$(CONFIG_PNX4008_WATCHDOG) += pnx4008_wdt.o
+ obj-$(CONFIG_IOP_WATCHDOG) += iop_wdt.o
+ obj-$(CONFIG_DAVINCI_WATCHDOG) += davinci_wdt.o
+--- /dev/null
++++ b/drivers/char/watchdog/sl351x_wdt.c
+@@ -0,0 +1,332 @@
++#include 
++#include 
++#include 
++#include 
++#include 
++#include 
++#include 
++#include 
++#include 
++#include 
++#include 
++#include 
++#include 
++#include 
++#include 
++#include 
++
++#define WATCHDOG_TEST 1
++#define PFX "sl351x-wdt: "
++
++#define _WATCHDOG_COUNTER  0x00
++#define _WATCHDOG_LOAD     0x04
++#define _WATCHDOG_RESTART  0x08
++#define _WATCHDOG_CR       0x0C
++#define _WATCHDOG_STATUS   0x10
++#define _WATCHDOG_CLEAR    0x14
++#define _WATCHDOG_INTRLEN  0x18
++
++static struct resource  *wdt_mem;
++static struct resource  *wdt_irq;
++static void __iomem     *wdt_base;
++static int 		wdt_margin = WATCHDOG_TIMEOUT_MARGIN;	/* in range of 0 .. 60s */
++
++static int open_state = WATCHDOG_DRIVER_CLOSE;
++static int wd_expire = 0;
++
++static void watchdog_enable(void)
++{
++	unsigned long wdcr;
++
++	wdcr = readl(wdt_base + _WATCHDOG_CR);
++	wdcr |= (WATCHDOG_WDENABLE_MSK|WATCHDOG_WDRST_MSK);
++#ifdef WATCHDOG_TEST
++	wdcr |= WATCHDOG_WDINTR_MSK;
++//	wdcr &= ~WATCHDOG_WDRST_MSK;
++#endif
++	wdcr &= ~WATCHDOG_WDCLOCK_MSK;
++	writel(wdcr, wdt_base + _WATCHDOG_CR);
++}
++
++static void watchdog_set_timeout(unsigned long timeout)
++{
++	timeout = WATCHDOG_TIMEOUT_SCALE * timeout;
++	writel(timeout, wdt_base + _WATCHDOG_LOAD);
++	writel(WATCHDOG_RESTART_VALUE, wdt_base + _WATCHDOG_RESTART);
++}
++
++static void watchdog_keepalive(void)
++{
++	writel(WATCHDOG_RESTART_VALUE, wdt_base + _WATCHDOG_RESTART);
++}
++
++static void watchdog_disable(void)
++{
++	unsigned long wdcr;
++
++	wdcr = readl(wdt_base + _WATCHDOG_CR);
++	wdcr &= ~WATCHDOG_WDENABLE_MSK;
++	writel(wdcr, wdt_base + _WATCHDOG_CR);
++}
++
++
++#ifdef WATCHDOG_TEST
++static irqreturn_t watchdog_irq(int irq, void *dev_id, struct pt_regs *regs)
++{
++	unsigned int clear;
++
++	writel(WATCHDOG_CLEAR_STATUS, wdt_base + _WATCHDOG_CLEAR);
++	printk(KERN_INFO PFX "Watchdog timeout, resetting system...\n");
++
++	clear = __raw_readl(IO_ADDRESS(SL2312_INTERRUPT_BASE)+0x0C);
++	clear &= 0x01;
++	__raw_writel(clear,IO_ADDRESS(SL2312_INTERRUPT_BASE)+0x08);
++	wd_expire = 1;
++	return IRQ_HANDLED;
++}
++
++#endif
++
++#define OPTIONS WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING | WDIOF_MAGICCLOSE
++static struct watchdog_info sl351x_wdt_ident = {
++	.options          =     OPTIONS,
++	.firmware_version =     0,
++	.identity         =     "sl351x Watchdog",
++};
++
++struct file_operations watchdog_fops = {
++	.write		= watchdog_write,
++	.read		= watchdog_read,
++	.open		= watchdog_open,
++	.release	= watchdog_release,
++	.ioctl		= watchdog_ioctl,
++};
++
++static int watchdog_open(struct inode *inode, struct file *filp)
++{
++	if (open_state == WATCHDOG_DRIVER_OPEN)
++		return -EBUSY;
++
++	wd_expire = 0;
++
++	watchdog_disable();
++	watchdog_set_timeout(wdt_margin);
++	watchdog_enable();
++
++	printk(KERN_INFO PFX "watchog timer enabled, margin: %ds.\n", wdt_margin);
++	open_state = WATCHDOG_DRIVER_OPEN;
++
++	return nonseekable_open(inode, filp);
++}
++
++static int watchdog_release(struct inode *inode, struct file *filp)
++{
++	watchdog_disable();
++
++	open_state = WATCHDOG_DRIVER_CLOSE;
++	wd_expire = 0;
++	printk(KERN_INFO PFX "watchog timer disabled, margin: %ds.\n", wdt_margin);
++
++	return 0;
++}
++
++static ssize_t watchdog_read(struct file *filp, char *buf, size_t count, loff_t *off)
++{
++	int i;
++	unsigned long val;
++
++
++	for(i=0;i< count;i++)
++	{
++		if ((i%4)==0)
++			val = *((unsigned long *)WATCHDOG_COUNTER);
++		buf[i] = (val & 0xFF);
++		val >>= 8;
++	}
++	return count;
++}
++
++static ssize_t watchdog_write(struct file *filp, const char *buf, size_t len, loff_t *off)
++{
++	/*  Refresh the timer. */
++	if (len) {
++		watchdog_keepalive();
++	}
++	return len;
++
++}
++
++static int watchdog_ioctl(struct inode *inode, struct file *filp,
++			  unsigned int cmd, unsigned long arg)
++{
++	void __user *argp = (void __user *)arg;
++	int margin;
++
++	switch(cmd)
++	{
++	case WDIOC_GETSUPPORT:
++		return copy_to_user(argp, &sl351x_wdt_ident,
++				    sizeof(sl351x_wdt_ident)) ? -EFAULT : 0;
++
++	case WDIOC_GETSTATUS:
++	case WDIOC_GETBOOTSTATUS:
++		return put_user(0, (int __user*)argp);
++
++	case WDIOC_KEEPALIVE:
++		watchdog_keepalive();
++		return 0;
++
++	case WDIOC_SETTIMEOUT:
++		if (get_user(margin, (int __user*)argp))
++			return -EFAULT;
++
++		/* Arbitrary, can't find the card's limits */
++		if ((margin < 0) || (margin > 60))
++			return -EINVAL;
++
++		// watchdog_disable();
++		wdt_margin = margin;
++		watchdog_set_timeout(margin);
++		watchdog_keepalive();
++		// watchdog_enable();
++
++		/* Fall through */
++
++	case WDIOC_GETTIMEOUT:
++		return put_user(wdt_margin, (int *)arg);
++
++	default:
++		return -ENOIOCTLCMD;
++	}
++}
++
++static struct miscdevice wd_dev= {
++	WATCHDOG_MINOR,
++	"watchdog",
++	&watchdog_fops
++};
++
++static char banner[] __initdata = KERN_INFO "SL351x Watchdog Timer, (c) 2007 WILIBOX\n";
++
++static int sl351x_wdt_probe(struct platform_device *pdev)
++{
++	struct resource *res;
++	int ret, size;
++	unsigned long wdcr;
++
++	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++	if (res == NULL) {
++		printk(KERN_INFO PFX "failed to get memory region resouce\n");
++		return -ENOMEM;
++	}
++
++	size = (res->end-res->start)+1;
++
++	wdt_mem = request_mem_region(res->start, size, pdev->name);
++	if (wdt_mem == NULL) {
++		printk(KERN_INFO PFX "failed to get memory region\n");
++		return -ENOENT;
++	}
++
++	wdt_base = ioremap(res->start, size);
++	if (wdt_base == NULL) {
++		printk(KERN_INFO PFX "failed to ioremap() region\n");
++		return -EINVAL;
++	}
++
++	res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
++	if (res == NULL) {
++		 printk(KERN_INFO PFX "failed to get irq resource\n");
++		 return -ENOENT;
++	}
++
++	wdt_irq = res;
++
++	ret = request_irq(res->start, watchdog_irq, 0, pdev->name, pdev);
++	if (ret != 0) {
++		printk(KERN_INFO PFX "failed to install irq (%d)\n", ret);
++		return ret;
++	}
++
++	wdcr = readl(wdt_base + _WATCHDOG_CR);
++	if (wdcr & WATCHDOG_WDENABLE_MSK) {
++		printk(KERN_INFO PFX "Found watchdog in enabled state, reseting ...\n");
++		wdcr &= ~WATCHDOG_WDENABLE_MSK;
++		writel(wdcr, wdt_base + _WATCHDOG_CR);
++	}
++
++	ret = misc_register(&wd_dev);
++
++	return ret;
++}
++
++static int sl351x_wdt_remove(struct platform_device *pdev)
++{
++	if (wdt_base != NULL) {
++		iounmap(wdt_base);
++		wdt_base = NULL;
++	}
++
++	if (wdt_irq != NULL) {
++		free_irq(wdt_irq->start, pdev);
++		release_resource(wdt_irq);
++		wdt_irq = NULL;
++	}
++
++	if (wdt_mem != NULL) {
++		release_resource(wdt_mem);
++		wdt_mem = NULL;
++	}
++
++	misc_deregister(&wd_dev);
++
++	return 0;
++}
++
++static void sl351x_wdt_shutdown(struct platform_device *dev)
++{
++	watchdog_disable();
++}
++
++#ifdef CONFIG_PM
++static int sl351x_wdt_suspend(struct platform_device *dev, pm_message_t state)
++{
++	watchdog_disable();
++}
++
++static int sl351x_wdt_resume(struct platform_device *dev)
++{
++	watchdog_set_timeout(wdt_margin);
++	watchdog_enable();
++}
++
++#else
++#define sl351x_wdt_suspend	NULL
++#define sl351x_wdt_resume	NULL
++#endif
++
++static struct platform_driver sl351x_wdt_driver = {
++	.probe          = sl351x_wdt_probe,
++	.remove         = sl351x_wdt_remove,
++	.shutdown       = sl351x_wdt_shutdown,
++	.suspend        = sl351x_wdt_suspend,
++	.resume         = sl351x_wdt_resume,
++	.driver         = {
++		.owner  = THIS_MODULE,
++		.name   = "sl351x-wdt",
++	},
++};
++
++static int __init watchdog_init(void)
++{
++	printk(banner);
++	return platform_driver_register(&sl351x_wdt_driver);
++}
++
++static void __exit watchdog_exit(void)
++{
++	platform_driver_unregister(&sl351x_wdt_driver);
++}
++
++module_init(watchdog_init);
++module_exit(watchdog_exit);
diff --git a/target/linux/storm/patches/1001-arch.patch b/target/linux/storm/patches/1001-arch.patch
deleted file mode 100644
index b0461d44e3..0000000000
--- a/target/linux/storm/patches/1001-arch.patch
+++ /dev/null
@@ -1,8864 +0,0 @@
---- a/arch/arm/Kconfig
-+++ b/arch/arm/Kconfig
-@@ -220,6 +220,9 @@
- 	help
- 	  This enables support for the Cirrus EP93xx series of CPUs.
- 
-+config ARCH_SL2312
-+    bool "SL2312"
-+
- config ARCH_FOOTBRIDGE
- 	bool "FootBridge"
- 	select FOOTBRIDGE
-@@ -414,6 +417,8 @@
- 
- source "arch/arm/mach-footbridge/Kconfig"
- 
-+source "arch/arm/mach-sl2312/Kconfig"
-+
- source "arch/arm/mach-integrator/Kconfig"
- 
- source "arch/arm/mach-iop32x/Kconfig"
-@@ -549,6 +554,16 @@
- config PCI_SYSCALL
- 	def_bool PCI
- 
-+config SL2312_LPC
-+    bool "LPC Host Support"
-+    depends on ARCH_SL2312
-+    help
-+
-+config SL2312_LPC_IT8712
-+    bool "IT8712 Support"
-+    depends on ARCH_SL2312 && SL2312_LPC
-+    help
-+
- # Select the host bridge type
- config PCI_HOST_VIA82C505
- 	bool
-@@ -988,6 +1003,10 @@
- source "drivers/mtd/Kconfig"
- endif
- 
-+if ARCH_SL2312
-+source "drivers/telephony/Kconfig"
-+endif
-+
- source "drivers/parport/Kconfig"
- 
- source "drivers/pnp/Kconfig"
-@@ -997,7 +1016,7 @@
- if PCMCIA || ARCH_CLPS7500 || ARCH_IOP32X || ARCH_IOP33X || ARCH_IXP4XX \
- 	|| ARCH_L7200 || ARCH_LH7A40X || ARCH_PXA || ARCH_RPC \
- 	|| ARCH_S3C2410 || ARCH_SA1100 || ARCH_SHARK || FOOTBRIDGE \
--	|| ARCH_IXP23XX
-+	|| ARCH_IXP23XX || ARCH_SL2312
- source "drivers/ide/Kconfig"
- endif
- 
---- a/arch/arm/Makefile
-+++ b/arch/arm/Makefile
-@@ -72,6 +72,7 @@
- tune-$(CONFIG_CPU_ARM922T)	:=-mtune=arm9tdmi
- tune-$(CONFIG_CPU_ARM925T)	:=-mtune=arm9tdmi
- tune-$(CONFIG_CPU_ARM926T)	:=-mtune=arm9tdmi
-+tune-$(CONFIG_CPU_FA52X)    :=-mtune=arm9tdmi
- tune-$(CONFIG_CPU_SA110)	:=-mtune=strongarm110
- tune-$(CONFIG_CPU_SA1100)	:=-mtune=strongarm1100
- tune-$(CONFIG_CPU_XSCALE)	:=$(call cc-option,-mtune=xscale,-mtune=strongarm110) -Wa,-mcpu=xscale
-@@ -111,6 +112,7 @@
-  machine-$(CONFIG_ARCH_PXA)	   := pxa
-  machine-$(CONFIG_ARCH_L7200)	   := l7200
-  machine-$(CONFIG_ARCH_INTEGRATOR) := integrator
-+ machine-$(CONFIG_ARCH_SL2312)     := sl2312
-  textofs-$(CONFIG_ARCH_CLPS711X)   := 0x00028000
-  machine-$(CONFIG_ARCH_CLPS711X)   := clps711x
-  machine-$(CONFIG_ARCH_IOP32X)	   := iop32x
---- a/arch/arm/boot/compressed/Makefile
-+++ b/arch/arm/boot/compressed/Makefile
-@@ -19,6 +19,10 @@
- OBJS		+= head-shark.o ofw-shark.o
- endif
- 
-+ifeq ($(CONFIG_ARCH_SL2312),y)
-+OBJS		+= head-sl2312.o
-+endif
-+
- ifeq ($(CONFIG_ARCH_L7200),y)
- OBJS		+= head-l7200.o
- endif
---- /dev/null
-+++ b/arch/arm/boot/compressed/head-sl2312.S
-@@ -0,0 +1,6 @@
-+#include 
-+#include 
-+
-+		.section	".start", "ax"
-+		mov	r7, #MACH_TYPE_SL2312
-+
---- a/arch/arm/boot/compressed/head.S
-+++ b/arch/arm/boot/compressed/head.S
-@@ -57,6 +57,17 @@
- 		mov	\rb, #0x50000000
- 		add	\rb, \rb, #0x4000 * CONFIG_S3C_LOWLEVEL_UART_PORT
- 		.endm
-+/*****************************************************
-+ *      for Storlink SoC
-+ *****************************************************/
-+#elif defined(CONFIG_ARCH_SL2312)
-+		.macro	loadsp, rb
-+		mov	\rb, #0x16000000
-+		.endm
-+		.macro	writeb, rb
-+		strb	\rb, [r3, #0]
-+		.endm
-+/****************************************************/
- #else
- 		.macro	loadsp,	rb
- 		addruart \rb
-@@ -116,7 +127,28 @@
- 		.rept	8
- 		mov	r0, r0
- 		.endr
--
-+/*****************************************************************************
-+ *  for Storlink Soc -- on chip UART
-+ *****************************************************************************/
-+#ifndef CONFIG_SERIAL_IT8712		// Jason test
-+@                mov     r3, #0x22000000
-+                mov     r3, #0x42000000
-+                mov     r11, #0x80
-+                strb    r11, [r3, #0xc]
-+                mov     r11, #0x0
-+                strb    r11, [r3, #0x4]
-+#ifndef CONFIG_SL3516_ASIC
-+                mov     r11, #0x9C		/*0x9c->19200 0x4E->38400 0x34->57600 */
-+#else
-+		mov 	r11, #0x9C		/* 0x61 for 30MHz on GeminiA chip*/
-+#endif
-+                strb    r11, [r3, #0x0]
-+                mov     r11, #0x03
-+                strb    r11, [r3, #0xc]
-+		        mov     r11, #0xFB
-+                strb    r11, [r3, #0x18]
-+#endif
-+/*****************************************************************************/
- 		b	1f
- 		.word	0x016f2818		@ Magic numbers to help the loader
- 		.word	start			@ absolute load/run zImage address
-@@ -458,6 +490,39 @@
- 		mcr	p15, 0, r0, c7, c5, 4	@ ISB
- 		mov	pc, r12
- 
-+/*****************************************************************************
-+ *  for Storlink Soc -- CPU cache
-+ *****************************************************************************/
-+__fa526_cache_on:
-+                mov     r12, lr
-+                bl      __setup_mmu
-+                mov     r0, #0
-+                mcr     p15, 0, r0, c7, c6, 0   @ Invalidate D cache
-+                mcr     p15, 0, r0, c7, c5, 0   @ Invalidate I cache
-+                mcr     p15, 0, r0, c7, c10, 4  @ drain write buffer
-+                mcr     p15, 0, r0, c8, c7, 0   @ flush I,D TLBs
-+                mcr     p15, 0, r3, c2, c0, 0   @ load page table pointer
-+                mov     r0, #-1
-+                mcr     p15, 0, r0, c3, c0, 0   @ load domain access register
-+                mrc     p15, 0, r0, c1, c0, 0
-+                mov     r0, r0
-+                mov     r0, r0
-+#ifndef CONFIG_CPU_DCACHE_DISABLE
-+        orr     r0, r0, #0x0004                 @ .... .... .... .1..
-+#endif
-+#ifndef CONFIG_CPU_ICACHE_DISABLE
-+        orr     r0, r0, #0x1000                 @ ...1 .... .... ....
-+#endif
-+
-+#ifndef DEBUG
-+                orr     r0, r0, #0x0039         @ Write buffer, mmu
-+#endif
-+                mcr     p15, 0, r0, c1, c0
-+                mov     r0, r0
-+                mov     r0, r0
-+                mov     pc, r12
-+/********************************************************************************/
-+
- __arm6_mmu_cache_on:
- 		mov	r12, lr
- 		bl	__setup_mmu
-@@ -625,6 +690,16 @@
- 
- 		@ These match on the architecture ID
- 
-+/*****************************************************************************
-+ *  for Storlink Soc -- CPU architecture ID
-+ *****************************************************************************/
-+        .word   0x66015261              @ FA526
-+        .word   0xff01fff1
-+        b       __fa526_cache_on
-+        b       __fa526_cache_off
-+        b       __fa526_cache_flush
-+/*****************************************************************************/
-+
- 		.word	0x00020000		@ ARMv4T
- 		.word	0x000f0000
- 		b	__armv4_mmu_cache_on
-@@ -712,6 +787,23 @@
- 		mcr	p15, 0, r0, c8, c7, 0	@ invalidate whole TLB
- 		mov	pc, r12
- 
-+/*****************************************************************************
-+ *  for Storlink Soc -- CPU cache
-+ *****************************************************************************/
-+__fa526_cache_off:
-+        mrc     p15, 0, r0, c1, c0
-+        bic     r0, r0, #0x000d
-+        mov     r1, #0
-+        mcr     p15, 0, r1, c7, c14, 0  @ clean and invalidate D cache
-+        mcr     p15, 0, r1, c7, c10, 4  @ drain WB
-+        mcr     p15, 0, r0, c1, c0      @ turn MMU and cache off
-+        mov     r0, #0
-+        mcr     p15, 0, r0, c7, c5, 0   @ invalidate whole cache v4
-+        mcr     p15, 0, r0, c8, c7, 0   @ invalidate whole TLB v4
-+        mov     pc, lr
-+/*****************************************************************************/
-+
-+
- __arm6_mmu_cache_off:
- 		mov	r0, #0x00000030		@ ARM6 control reg.
- 		b	__armv3_mmu_cache_off
-@@ -759,6 +851,17 @@
- 		mcr	p15, 0, ip, c7, c10, 4	@ drain WB
- 		mov	pc, lr
- 		
-+/*****************************************************************************
-+ *  for Storlink Soc -- CPU cache
-+ *****************************************************************************/
-+__fa526_cache_flush:
-+                mov     r1, #0
-+                mcr     p15, 0, r1, c7, c14, 0  @ clean and invalidate D cache
-+                mcr     p15, 0, r1, c7, c5, 0   @ flush I cache
-+                mcr     p15, 0, r1, c7, c10, 4  @ drain WB
-+                mov     pc, lr
-+/*****************************************************************************/
-+
- 
- __armv6_mmu_cache_flush:
- 		mov	r1, #0
---- /dev/null
-+++ b/arch/arm/boot/compressed/it8712.h
-@@ -0,0 +1,25 @@
-+
-+#ifndef __IT8712_H__
-+#define __IT8712_H__
-+
-+#include "asm/arch/sl2312.h"
-+
-+#define IT8712_IO_BASE			SL2312_LPC_IO_BASE
-+//#define IT8712_IO_BASE			0x27000000
-+// Device LDN
-+#define LDN_SERIAL1				0x01
-+#define LDN_SERIAL2				0x02
-+#define LDN_PARALLEL			0x03
-+#define LDN_KEYBOARD			0x05
-+#define LDN_MOUSE				0x06
-+#define LDN_GPIO				0x07
-+
-+#define IT8712_UART1_PORT      	0x3F8
-+#define IT8712_UART2_PORT      	0x2F8
-+
-+#define IT8712_GPIO_BASE		0x800	// 0x800-0x804 for GPIO set1-set5
-+
-+void LPCSetConfig(char LdnNumber, char Index, char data);
-+char LPCGetConfig(char LdnNumber, char Index);
-+
-+#endif
---- a/arch/arm/boot/compressed/misc.c
-+++ b/arch/arm/boot/compressed/misc.c
-@@ -30,7 +30,7 @@
- #include 
- 
- #ifdef CONFIG_DEBUG_ICEDCC
--
-+#include "it8712.h"
- #ifdef CONFIG_CPU_V6
- 
- static void icedcc_putc(int ch)
-@@ -69,6 +69,7 @@
- #define flush()	do { } while (0)
- #endif
- 
-+#if 0
- static void putstr(const char *ptr)
- {
- 	char c;
-@@ -81,11 +82,36 @@
- 
- 	flush();
- }
-+#endif
- 
- #endif
- 
- #define __ptr_t void *
- 
-+#ifdef CONFIG_SERIAL_IT8712
-+unsigned int it8712_uart_base;
-+#define UART_RX         0
-+#define UART_TX         0
-+#define UART_DLL        0
-+#define UART_TRG        0
-+#define UART_DLM        1
-+#define UART_IER        1
-+#define UART_FCTR       1
-+#define UART_IIR        2
-+#define UART_FCR        2
-+#define UART_EFR        2
-+#define UART_LCR        3
-+#define UART_MCR        4
-+#define UART_LSR        5
-+#define UART_MSR        6
-+#define UART_SCR        7
-+#define UART_EMSR       7
-+void LPCEnterMBPnP(void);
-+void LPCExitMBPnP(void);
-+int SearchIT8712(void);
-+int InitLPCInterface(void);
-+#endif
-+
- /*
-  * Optimised C version of memzero for the ARM.
-  */
-@@ -346,6 +372,9 @@
- decompress_kernel(ulg output_start, ulg free_mem_ptr_p, ulg free_mem_ptr_end_p,
- 		  int arch_id)
- {
-+#ifdef CONFIG_SERIAL_IT8712
-+        unsigned char *addr;
-+#endif
- 	output_data		= (uch *)output_start;	/* Points to kernel start */
- 	free_mem_ptr		= free_mem_ptr_p;
- 	free_mem_ptr_end	= free_mem_ptr_end_p;
-@@ -353,6 +382,33 @@
- 
- 	arch_decomp_setup();
- 
-+#ifdef CONFIG_SERIAL_IT8712
-+
-+        InitLPCInterface();
-+        LPCSetConfig(0, 0x02, 0x01);
-+        LPCSetConfig(LDN_SERIAL1, 0x30, 0x1);
-+        LPCSetConfig(LDN_SERIAL1, 0x23, 0x0);
-+        it8712_uart_base = IT8712_IO_BASE;
-+        it8712_uart_base += ((LPCGetConfig(LDN_SERIAL1, 0x60) << 8) + LPCGetConfig(LDN_SERIAL1, 0x61));
-+
-+        do {
-+        addr = (unsigned char *)(it8712_uart_base + UART_LCR) ;
-+        *addr = 0x80;
-+        // Set Baud Rate
-+        addr = (unsigned char *)(it8712_uart_base+UART_DLL);
-+        *addr = 0x06 ;
-+        addr = (unsigned char *)(it8712_uart_base+UART_DLM);
-+        *addr = 0x00 ;
-+
-+        addr = (unsigned char *)(it8712_uart_base+UART_LCR);    // LCR
-+        *addr = 0x07 ;
-+        addr = (unsigned char *)(it8712_uart_base+UART_MCR);    // MCR
-+        *addr = 0x08 ;
-+        addr = (unsigned char *)(it8712_uart_base+UART_FCR);    // FCR
-+        *addr = 0x01 ;
-+    	} while(0);
-+#endif
-+
- 	makecrc();
- 	putstr("Uncompressing Linux...");
- 	gunzip();
-@@ -374,4 +430,119 @@
- 	return 0;
- }
- #endif
-+
-+#ifdef CONFIG_SERIAL_IT8712
-+
-+#define LPC_KEY_ADDR    (unsigned char *)(SL2312_LPC_IO_BASE + 0x2e)
-+#define LPC_DATA_ADDR   (unsigned char *)(SL2312_LPC_IO_BASE + 0x2f)
-+#define LPC_BUS_CTRL                    *( unsigned char*) (SL2312_LPC_HOST_BASE + 0)
-+#define LPC_BUS_STATUS                  *( unsigned char*) (SL2312_LPC_HOST_BASE + 2)
-+#define LPC_SERIAL_IRQ_CTRL             *( unsigned char*) (SL2312_LPC_HOST_BASE + 4)
-+
-+char LPCGetConfig(char LdnNumber, char Index)
-+{
-+        char rtn;
-+        unsigned char *addr ;
-+
-+        LPCEnterMBPnP();                                // Enter IT8712 MB PnP mode
-+
-+        addr = LPC_KEY_ADDR;
-+        *addr = 0x07 ;
-+
-+        addr = LPC_DATA_ADDR;
-+        *addr = LdnNumber ;
-+
-+        addr = LPC_KEY_ADDR;
-+        *addr = Index ;
-+
-+        addr = LPC_DATA_ADDR ;
-+        rtn = *addr ;
-+
-+        LPCExitMBPnP();
-+        return rtn;
-+
-+}
-+
-+void LPCSetConfig(char LdnNumber, char Index, char data)
-+{
-+        unsigned char *addr;
-+        LPCEnterMBPnP();                                // Enter IT8712 MB PnP mode
-+        addr = LPC_KEY_ADDR;
-+        *addr = 0x07;
-+        addr = LPC_DATA_ADDR;
-+        *addr = LdnNumber;
-+        addr = LPC_KEY_ADDR;
-+        *addr = Index;
-+        addr = LPC_DATA_ADDR;
-+        *addr = data;
-+
-+        LPCExitMBPnP();
-+}
-+
-+//unsigned char key[4] ;
-+void LPCEnterMBPnP(void)
-+{
-+        unsigned char *addr;
-+        addr = LPC_KEY_ADDR;
-+        unsigned char key[4] = {0x87, 0x01, 0x55, 0x55};
-+
-+ 		do {
-+ 		*addr = key[0];
-+ 		*addr = key[1];
-+ 		*addr = key[2];
-+ 		*addr = key[3];
-+ 		}while(0);
-+}
-+
-+void LPCExitMBPnP(void)
-+{
-+        unsigned char *addr;
-+        addr = LPC_KEY_ADDR;
-+        *addr = 0x02 ;
-+
-+        addr = LPC_DATA_ADDR;
-+        *addr = 0x02 ;
-+}
-+
-+int InitLPCInterface(void)
-+{
-+        int i;
-+        LPC_BUS_CTRL = 0xc0;
-+        LPC_SERIAL_IRQ_CTRL = 0xc0;
-+
-+        for(i=0;i<0x2000;i++) ;
-+
-+        LPC_SERIAL_IRQ_CTRL = 0x80;
-+        if (!SearchIT8712()) ;
-+//			while(1);
-+        return 0;
-+}
-+
-+int SearchIT8712(void)
-+{
-+        unsigned char Id1, Id2;
-+        unsigned short Id;
-+        unsigned char *addr;
-+
-+        LPCEnterMBPnP();
-+        addr = LPC_KEY_ADDR;
-+        *addr = 0x20 ;
-+        addr = LPC_DATA_ADDR;
-+        Id1 = *addr ;
-+
-+        addr = LPC_KEY_ADDR;
-+        *addr = 0x21 ;
-+        addr = LPC_DATA_ADDR;
-+        Id2 = *addr ;
-+
-+        Id = (Id1 << 8) | Id2;
-+        LPCExitMBPnP();
-+
-+        if (Id == 0x8712)
-+                return 1;
-+        else
-+                return 0;
-+}
-+
-+#endif
- 	
---- a/arch/arm/kernel/entry-armv.S
-+++ b/arch/arm/kernel/entry-armv.S
-@@ -18,6 +18,8 @@
- #include 
- #include 
- #include 
-+#include 
-+#include 
- #include 
- #include 
- 
---- a/arch/arm/kernel/irq.c
-+++ b/arch/arm/kernel/irq.c
-@@ -40,6 +40,8 @@
- #include 
- #include 
- 
-+extern int fixup_irq(unsigned int irq);
-+
- /*
-  * No architecture-specific irq_finish function defined in arm/arch/irqs.h.
-  */
-@@ -111,8 +113,11 @@
- asmlinkage void __exception asm_do_IRQ(unsigned int irq, struct pt_regs *regs)
- {
- 	struct pt_regs *old_regs = set_irq_regs(regs);
--	struct irq_desc *desc = irq_desc + irq;
-+//	struct irq_desc *desc = irq_desc + irq;
-+	struct irq_desc *desc;
- 
-+	irq = fixup_irq(irq);
-+	desc = irq_desc + irq;
- 	/*
- 	 * Some hardware gives randomly wrong interrupts.  Rather
- 	 * than crashing, do something sensible.
---- a/arch/arm/kernel/process.c
-+++ b/arch/arm/kernel/process.c
-@@ -117,7 +117,7 @@
- void (*pm_idle)(void);
- EXPORT_SYMBOL(pm_idle);
- 
--void (*pm_power_off)(void);
-+//void (*pm_power_off)(void);
- EXPORT_SYMBOL(pm_power_off);
- 
- void (*arm_pm_restart)(char str) = arm_machine_restart;
-@@ -188,13 +188,37 @@
- 
- void machine_halt(void)
- {
-+	unsigned int reg_v;
-+
-+	printk("arch_power_off\n");
-+
-+	reg_v = readl(IO_ADDRESS(SL2312_POWER_CTRL_BASE) + 0x04);
-+	reg_v &= ~0x00000002;
-+	reg_v |= 0x1;
-+	mdelay(5);
-+	// Power off
-+	__raw_writel( reg_v, IO_ADDRESS(SL2312_POWER_CTRL_BASE) + 0x04);
-+
- }
- 
- 
- void machine_power_off(void)
- {
--	if (pm_power_off)
-+	unsigned int reg_v;
-+
-+//	if (pm_power_off)
-+	if (&pm_power_off!=NULL)
- 		pm_power_off();
-+
-+	printk("arch_power_off\n");
-+
-+	reg_v = readl(IO_ADDRESS(SL2312_POWER_CTRL_BASE) + 0x04);
-+	reg_v &= ~0x00000002;
-+	reg_v |= 0x1;
-+	mdelay(5);
-+	// Power off
-+	__raw_writel( reg_v, IO_ADDRESS(SL2312_POWER_CTRL_BASE) + 0x04);
-+
- }
- 
- void machine_restart(char * __unused)
---- a/arch/arm/kernel/time.c
-+++ b/arch/arm/kernel/time.c
-@@ -502,8 +502,13 @@
- 
- device_initcall(timer_init_sysfs);
- 
-+extern unsigned int rtc_get_time_second(void);
-+
- void __init time_init(void)
- {
-+#ifdef CONFIG_SL2312_RTC
-+	xtime.tv_sec  = rtc_get_time_second() ;
-+#endif
- #ifndef CONFIG_GENERIC_TIME
- 	if (system_timer->offset == NULL)
- 		system_timer->offset = dummy_gettimeoffset;
---- /dev/null
-+++ b/arch/arm/mach-sl2312/Kconfig
-@@ -0,0 +1,33 @@
-+
-+menu "SL2312"
-+
-+config SL3516_ASIC
-+	bool "SL3516 ASIC version"
-+	depends on ARCH_SL2312
-+	help
-+	  This option to select AISC or FPGA
-+config PCI
-+       bool "SL2312 PCI"
-+       depends on ARCH_SL2312
-+       help
-+         This option to enable Storlink PCI controller
-+
-+config SL2312_LPC
-+       bool "SL2312 LPC"
-+       depends on ARCH_SL2312
-+       help
-+         This option to enable Low Pin Count controller
-+
-+config SL2312_USB
-+       bool "SL2312 USB"
-+       depends on ARCH_SL2312
-+       help
-+         This option to enable USB OTG host controller
-+
-+config GEMINI_IPI
-+       bool "Gemini IPI test"
-+       depends on ARCH_SL2312
-+       help
-+	 Enable this option to test dual cpu Inter-Processor-Interrupt
-+endmenu
-+
---- /dev/null
-+++ b/arch/arm/mach-sl2312/Makefile
-@@ -0,0 +1,16 @@
-+#
-+# Makefile for the linux kernel.
-+#
-+
-+# Object file lists.
-+
-+obj-y			:= arch.o irq.o mm.o time.o sl3516_device.o
-+obj-m			:=
-+obj-n			:=
-+
-+
-+obj-$(CONFIG_PCI) += pci.o
-+obj-$(CONFIG_SL2312_LPC) += lpc.o
-+obj-$(CONFIG_SL2312_USB) += sl2312-otg.o # sl2312-otg-1.o
-+obj-$(CONFIG_GEMINI_XOR_ACCE) += xor.o
-+obj-$(CONFIG_GEMINI_IPI)      += gemini_ipi.o
---- /dev/null
-+++ b/arch/arm/mach-sl2312/Makefile.boot
-@@ -0,0 +1,5 @@
-+   zreladdr-y	:= 0x00008000
-+params_phys-y	:= 0x00508100
-+#params_phys-y	:= 0x00008100
-+initrd_phys-y	:= 0x00800000
-+
---- /dev/null
-+++ b/arch/arm/mach-sl2312/arch.c
-@@ -0,0 +1,72 @@
-+/*
-+ *  linux/arch/arm/mach-epxa10db/arch.c
-+ *
-+ *  Copyright (C) 2000 Deep Blue Solutions Ltd
-+ *  Copyright (C) 2001 Altera Corporation
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
-+ */
-+#include 
-+#include 
-+
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+
-+extern void sl2312_map_io(void);
-+extern void sl2312_init_irq(void);
-+extern unsigned long sl2312_gettimeoffset (void);
-+extern void __init sl2312_time_init(void);
-+
-+static struct sys_timer sl2312_timer = {
-+	.init		= sl2312_time_init,
-+	.offset		= sl2312_gettimeoffset,
-+};
-+
-+static void __init
-+sl2312_fixup(struct machine_desc *desc, struct tag *tags,
-+                 char **cmdline, struct meminfo *mi)
-+{
-+        mi->nr_banks      = 1;
-+        mi->bank[0].start = 0;
-+#ifdef CONFIG_GEMINI_IPI
-+        mi->bank[0].size  = (64*1024*1024);  // 128M
-+#else
-+        mi->bank[0].size  = (128*1024*1024);  // 128M
-+#endif
-+        mi->bank[0].node  = 0;
-+}
-+
-+/* MACHINE_START(SL2312, "GeminiA")
-+	MAINTAINER("Storlink Semi")
-+	BOOT_MEM(0x00000000, 0x90000000, 0xf0000000)
-+        FIXUP(sl2312_fixup)
-+	MAPIO(sl2312_map_io)
-+	INITIRQ(sl2312_init_irq)
-+	.timer = &sl2312_timer,
-+MACHINE_END */
-+
-+MACHINE_START(SL2312, "GeminiA")
-+	/* .phys_ram	= 0x00000000, */
-+	.phys_io	= 0x7fffc000,
-+	.io_pg_offst	= ((0xffffc000) >> 18) & 0xfffc,
-+	.boot_params	= 0x100,
-+	.fixup      = sl2312_fixup,
-+	.map_io		= sl2312_map_io,
-+	.init_irq	= sl2312_init_irq,
-+	.timer		= &sl2312_timer,
-+MACHINE_END
---- /dev/null
-+++ b/arch/arm/mach-sl2312/gemini_ipi.c
-@@ -0,0 +1,593 @@
-+/*
-+ * FILE NAME sl_cir.c
-+ *
-+ * BRIEF MODULE DESCRIPTION
-+ *  IPI Driver for CPU1.
-+ *
-+ *  Author: StorLink, Corp.
-+ *          Jason Lee
-+ *
-+ * Copyright 2002~2006 StorLink, Corp.
-+ *
-+ *  This program is free software; you can redistribute  it and/or modify it
-+ *  under  the terms of  the GNU General  Public License as published by the
-+ *  Free Software Foundation;  either version 2 of the  License, or (at your
-+ *  option) any later version.
-+ *
-+ *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
-+ *  WARRANTIES,   INCLUDING, BUT NOT  LIMit8712D  TO, THE IMPLIED WARRANTIES OF
-+ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
-+ *  NO  EVENT  SHALL   THE AUTHOR  BE	LIABLE FOR ANY   DIRECT, INDIRECT,
-+ *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
-+ *  NOT LIMit8712D   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
-+ *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
-+ *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
-+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
-+ *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ *
-+ *  You should have received a copy of the  GNU General Public License along
-+ *  with this program; if not, writ8712  to the Free Software Foundation, Inc.,
-+ *  675 Mass Ave, Cambridge, MA 02139, USA.
-+ */
-+
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+
-+
-+#include 
-+
-+#include 
-+
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+
-+#include 
-+
-+
-+static int sl_ipi_debug = 1 ;
-+#define DEB(x)  if(sl_ipi_debug>=1) x
-+
-+#define SRAM_PTR		IO_ADDRESS(SL2312_SRAM_BASE)
-+volatile JSCALE_REQ_T *req=(JSCALE_REQ_T*)SRAM_PTR;
-+volatile JSCALE_RSP_T *rsp=(JSCALE_RSP_T*)(SRAM_PTR+0x20);
-+
-+unsigned int jscale_status=0;
-+
-+#define JSCALE_WAIT	0
-+#define XXXXXX_WAIT	1
-+#define MAX_WAIT_Q	8
-+wait_queue_head_t gemini_ipi_wait[MAX_WAIT_Q];
-+
-+#define DRAMCTL_DMA_CTL		0X20
-+#define DRAMCTL_DMA_SA		0X24
-+#define DRAMCTL_DMA_DA		0X28
-+#define DRAMCTL_DMA_CNT		0X2C
-+#define MEMCPY_UNIT		0x40000
-+int hw_memcpy(const void *to, const void *from, unsigned int bytes)
-+{
-+	unsigned int reg_a,reg_d;
-+	int count = bytes,i=0;
-+
-+	consistent_sync((unsigned int *)to, bytes, DMA_BIDIRECTIONAL);
-+	consistent_sync((unsigned int *)from,bytes, DMA_TO_DEVICE);
-+
-+	DEB(printk("hwmemcpy:count %d\n",count));
-+	while(count>0){
-+		// SA
-+		reg_a = IO_ADDRESS(SL2312_DRAM_CTRL_BASE)+DRAMCTL_DMA_SA;
-+		reg_d = (unsigned int )__virt_to_phys(from) + i*MEMCPY_UNIT;
-+		DEB(printk("hwmemcpy:from 0x%08x\n",reg_d));
-+		writel(reg_d,reg_a);
-+		// DA
-+		reg_a = IO_ADDRESS(SL2312_DRAM_CTRL_BASE)+DRAMCTL_DMA_DA;
-+		reg_d = (unsigned int )__virt_to_phys(to) + i*MEMCPY_UNIT;
-+		writel(reg_d,reg_a);
-+		DEB(printk("hwmemcpy:to 0x%08x\n",reg_d));
-+		// byte count
-+		reg_a = IO_ADDRESS(SL2312_DRAM_CTRL_BASE)+DRAMCTL_DMA_CNT;
-+		reg_d = (count>=MEMCPY_UNIT)?MEMCPY_UNIT:count;
-+		writel(reg_d,reg_a);
-+		// start DMA
-+		reg_a = IO_ADDRESS(SL2312_DRAM_CTRL_BASE)+DRAMCTL_DMA_CTL;
-+		writel(0x80000001,reg_a);
-+
-+		do{
-+			cond_resched();
-+//			msleep(4);
-+			reg_d = readl(IO_ADDRESS(SL2312_DRAM_CTRL_BASE)+DRAMCTL_DMA_CTL);
-+		}while(reg_d&0x1);
-+
-+		count -= MEMCPY_UNIT;
-+		i++;
-+	}
-+
-+	return bytes;
-+}
-+
-+static irqreturn_t ipi_interrupt()
-+{
-+	unsigned int id=getcpuid(),tmp;
-+
-+	//dmac_inv_range(__phys_to_virt(SL2312_SRAM_BASE),__phys_to_virt(SHAREADDR)+0x2000);
-+
-+
-+	// Clear Interrupt
-+	if(id==CPU0) {
-+		tmp = readl(CPU1_STATUS);
-+		tmp &= ~CPU_IPI_BIT_MASK;
-+		writel(tmp,CPU1_STATUS);
-+	}
-+	else{
-+		tmp = readl(CPU0_STATUS);
-+		tmp &= ~CPU_IPI_BIT_MASK;
-+		writel(tmp,CPU0_STATUS);
-+	}
-+
-+	//
-+	DEB(printk("ipi interrupt:0x%x\n",rsp->status));
-+	switch(rsp->status){
-+		case JSCALE_STATUS_OK:
-+
-+			break;
-+		case JSCALE_UNKNOWN_MSG_TYPE:
-+
-+			break;
-+		case JSCALE_FAILED_FILE_SIZE:
-+
-+			break;
-+		case JSCALE_FAILED_MALLOC:
-+
-+			break;
-+		case JSCALE_FAILED_FORMAT:
-+
-+			break;
-+		case JSCALE_DECODE_ERROR:
-+
-+			break;
-+
-+	}
-+	jscale_status = rsp->status;
-+//	wake_up(&gemini_ipi_wait[JSCALE_WAIT]);
-+
-+	return IRQ_HANDLED;
-+}
-+
-+static int gemini_ipi_open(struct inode *inode, struct file *file)
-+{
-+	DEB(printk("ipi open\n"));
-+	return 0;
-+}
-+
-+
-+static int gemini_ipi_release(struct inode *inode, struct file *file)
-+{
-+	DEB(printk("ipi release\n"));
-+	return 0;
-+}
-+
-+
-+static int gemini_ipi_ioctl(struct inode *inode, struct file *file,
-+	unsigned int cmd, unsigned long arg)
-+{
-+	JSCALE_RSP_T tmp;
-+
-+	switch(cmd) {
-+		case GEMINI_IPI_JSCALE_REQ:
-+			DEB(printk("ipi:ioctl jscale request %dX%d Q:%d\n",req->ScaledImageWidth,req->ScaledImageHeight,req->ScaledImageQuality));
-+			if (copy_from_user(req, (JSCALE_REQ_T *)arg, sizeof(JSCALE_REQ_T)))
-+				return -EFAULT;
-+			req->hdr.type = IPC_JSCALE_REQ_MSG;
-+			req->hdr.length = sizeof(JSCALE_REQ_T);
-+			req->input_location  = CPU_1_DATA_OFFSET;
-+			req->output_location = CPU_1_DATA_OFFSET;
-+			break;
-+		case GEMINI_IPI_JSCALE_STAT:
-+			DEB(printk("ipi:ioctl jscale stat \n"));
-+			if(jscale_status==JSCALE_BUSY){						// not yet
-+				tmp.status = JSCALE_BUSY;
-+				if (copy_to_user((JSCALE_RSP_T *)arg,&tmp, sizeof(JSCALE_RSP_T)))
-+					return -EFAULT;
-+			}
-+			else{												// finish or error
-+				if (copy_to_user((JSCALE_RSP_T *)arg,rsp, sizeof(JSCALE_RSP_T)))
-+					return -EFAULT;
-+			}
-+			break;
-+		default:
-+			printk("IPI: Error IOCTL number\n");
-+			return -ENOIOCTLCMD;
-+	}
-+
-+	return 0;
-+}
-+
-+#define SRAM_SIZE	0x2000
-+static ssize_t gemini_ipi_write(struct file *file_p, const char *buf, size_t count, loff_t * ppos)
-+{
-+	int i=0,tmp=0,j;
-+	const char *ptr=(unsigned int)__phys_to_virt(CPU_1_MEM_BASE+CPU_1_DATA_OFFSET);
-+	DEB(printk("ipi:write 0x%x to 0x%x length:%d\n",&buf,ptr,count));
-+	memcpy(ptr,buf,count);
-+	consistent_sync(ptr,count, DMA_TO_DEVICE);
-+	//hw_memcpy(ptr,&buf,count);
-+
-+/*	if(count>SRAM_SIZE){
-+		for(i=0;i<(count/SRAM_SIZE);i++)
-+			raid_memcpy(ptr+i*SRAM_SIZE,buf+i*SRAM_SIZE,SRAM_SIZE);
-+		if(count%SRAM_SIZE)
-+			raid_memcpy(ptr+i*SRAM_SIZE,buf+i*SRAM_SIZE,count%SRAM_SIZE);
-+	}
-+	else
-+		raid_memcpy(ptr,buf,count);
-+*/
-+
-+/*	for(i=0;iSRAM_SIZE){
-+		for(i=0;i<(count/SRAM_SIZE);i++)
-+			raid_memcpy(buf+i*SRAM_SIZE,p_mbox->message+i*SRAM_SIZE,SRAM_SIZE);
-+		if(count%0xFFFF)
-+			raid_memcpy(buf+i*SRAM_SIZE,p_mbox->message+i*SRAM_SIZE,length%SRAM_SIZE);
-+	}
-+	else
-+		raid_memcpy(buf,p_mbox->message,length);
-+*/
-+	return length;
-+}
-+
-+void do_mapping_read(struct address_space *mapping,
-+			     struct file_ra_state *_ra,
-+			     struct file *filp,
-+			     loff_t *ppos,
-+			     read_descriptor_t *desc,
-+			     read_actor_t actor)
-+{
-+	struct inode *inode = mapping->host;
-+	unsigned long index;
-+	unsigned long end_index;
-+	unsigned long offset;
-+	unsigned long last_index;
-+	unsigned long next_index;
-+	unsigned long prev_index;
-+	loff_t isize;
-+	struct page *cached_page;
-+	int error;
-+	struct file_ra_state ra = *_ra;
-+
-+	cached_page = NULL;
-+	index = *ppos >> PAGE_CACHE_SHIFT;
-+	next_index = index;
-+	prev_index = ra.prev_page;
-+	last_index = (*ppos + desc->count + PAGE_CACHE_SIZE-1) >> PAGE_CACHE_SHIFT;
-+	offset = *ppos & ~PAGE_CACHE_MASK;
-+
-+	isize = i_size_read(inode);
-+	if (!isize)
-+		goto out;
-+
-+	end_index = (isize - 1) >> PAGE_CACHE_SHIFT;
-+	for (;;) {
-+		struct page *page;
-+		unsigned long nr, ret;
-+
-+		/* nr is the maximum number of bytes to copy from this page */
-+		nr = PAGE_CACHE_SIZE;
-+		if (index >= end_index) {
-+			if (index > end_index)
-+				goto out;
-+			nr = ((isize - 1) & ~PAGE_CACHE_MASK) + 1;
-+			if (nr <= offset) {
-+				goto out;
-+			}
-+		}
-+		nr = nr - offset;
-+
-+		cond_resched();
-+		if (index == next_index)
-+			next_index = page_cache_readahead(mapping, &ra, filp,
-+					index, last_index - index);
-+
-+find_page:
-+		page = find_get_page(mapping, index);
-+		if (unlikely(page == NULL)) {
-+			handle_ra_miss(mapping, &ra, index);
-+			goto no_cached_page;
-+		}
-+		if (!PageUptodate(page))
-+			goto page_not_up_to_date;
-+page_ok:
-+
-+		/* If users can be writing to this page using arbitrary
-+		 * virtual addresses, take care about potential aliasing
-+		 * before reading the page on the kernel side.
-+		 */
-+		if (mapping_writably_mapped(mapping))
-+			flush_dcache_page(page);
-+
-+		/*
-+		 * When (part of) the same page is read multiple times
-+		 * in succession, only mark it as accessed the first time.
-+		 */
-+		if (prev_index != index)
-+			mark_page_accessed(page);
-+		prev_index = index;
-+
-+		/*
-+		 * Ok, we have the page, and it's up-to-date, so
-+		 * now we can copy it to user space...
-+		 *
-+		 * The actor routine returns how many bytes were actually used..
-+		 * NOTE! This may not be the same as how much of a user buffer
-+		 * we filled up (we may be padding etc), so we can only update
-+		 * "pos" here (the actor routine has to update the user buffer
-+		 * pointers and the remaining count).
-+		 */
-+		ret = actor(desc, page, offset, nr);
-+		offset += ret;
-+		index += offset >> PAGE_CACHE_SHIFT;
-+		offset &= ~PAGE_CACHE_MASK;
-+
-+		page_cache_release(page);
-+		if (ret == nr && desc->count)
-+			continue;
-+		goto out;
-+
-+page_not_up_to_date:
-+		/* Get exclusive access to the page ... */
-+		lock_page(page);
-+
-+		/* Did it get unhashed before we got the lock? */
-+		if (!page->mapping) {
-+			unlock_page(page);
-+			page_cache_release(page);
-+			continue;
-+		}
-+
-+		/* Did somebody else fill it already? */
-+		if (PageUptodate(page)) {
-+			unlock_page(page);
-+			goto page_ok;
-+		}
-+
-+readpage:
-+		/* Start the actual read. The read will unlock the page. */
-+		error = mapping->a_ops->readpage(filp, page);
-+
-+		if (unlikely(error))
-+			goto readpage_error;
-+
-+		if (!PageUptodate(page)) {
-+			lock_page(page);
-+			if (!PageUptodate(page)) {
-+				if (page->mapping == NULL) {
-+					/*
-+					 * invalidate_inode_pages got it
-+					 */
-+					unlock_page(page);
-+					page_cache_release(page);
-+					goto find_page;
-+				}
-+				unlock_page(page);
-+				error = -EIO;
-+				goto readpage_error;
-+			}
-+			unlock_page(page);
-+		}
-+
-+		/*
-+		 * i_size must be checked after we have done ->readpage.
-+		 *
-+		 * Checking i_size after the readpage allows us to calculate
-+		 * the correct value for "nr", which means the zero-filled
-+		 * part of the page is not copied back to userspace (unless
-+		 * another truncate extends the file - this is desired though).
-+		 */
-+		isize = i_size_read(inode);
-+		end_index = (isize - 1) >> PAGE_CACHE_SHIFT;
-+		if (unlikely(!isize || index > end_index)) {
-+			page_cache_release(page);
-+			goto out;
-+		}
-+
-+		/* nr is the maximum number of bytes to copy from this page */
-+		nr = PAGE_CACHE_SIZE;
-+		if (index == end_index) {
-+			nr = ((isize - 1) & ~PAGE_CACHE_MASK) + 1;
-+			if (nr <= offset) {
-+				page_cache_release(page);
-+				goto out;
-+			}
-+		}
-+		nr = nr - offset;
-+		goto page_ok;
-+
-+readpage_error:
-+		/* UHHUH! A synchronous read error occurred. Report it */
-+		desc->error = error;
-+		page_cache_release(page);
-+		goto out;
-+
-+no_cached_page:
-+		/*
-+		 * Ok, it wasn't cached, so we need to create a new
-+		 * page..
-+		 */
-+		if (!cached_page) {
-+			cached_page = page_cache_alloc_cold(mapping);
-+			if (!cached_page) {
-+				desc->error = -ENOMEM;
-+				goto out;
-+			}
-+		}
-+		error = add_to_page_cache_lru(cached_page, mapping,
-+						index, GFP_KERNEL);
-+		if (error) {
-+			if (error == -EEXIST)
-+				goto find_page;
-+			desc->error = error;
-+			goto out;
-+		}
-+		page = cached_page;
-+		cached_page = NULL;
-+		goto readpage;
-+	}
-+
-+out:
-+	*_ra = ra;
-+
-+	*ppos = ((loff_t) index << PAGE_CACHE_SHIFT) + offset;
-+	if (cached_page)
-+		page_cache_release(cached_page);
-+	if (filp)
-+		file_accessed(filp);
-+}
-+
-+int ipi_send_actor(read_descriptor_t * desc, struct page *page, unsigned long offset, unsigned long size)
-+{
-+	ssize_t written;
-+	unsigned long count = desc->count;
-+	struct file *file = desc->arg.data;
-+	unsigned int *ptr_to=(unsigned int)__phys_to_virt(CPU_1_MEM_BASE+CPU_1_DATA_OFFSET) + desc->written;
-+	void *ptr_from;
-+
-+	if (size > count)
-+		size = count;
-+
-+	ptr_from = page_address(page)+offset;
-+	written = memcpy(ptr_to,ptr_from,size);
-+
-+	if (written < 0) {
-+		desc->error = written;
-+		written = 0;
-+	}
-+	desc->count = count - written;
-+	desc->written += written;
-+	return written;
-+}
-+
-+ssize_t gemini_ipi_sendfile(struct file *in_file, loff_t *ppos,
-+			 size_t count, read_actor_t actor, void *TARGET)
-+{
-+	read_descriptor_t desc;
-+
-+	if (!count)
-+		return 0;
-+
-+	desc.written = 0;
-+	desc.count = count;
-+	desc.arg.data = TARGET;
-+	desc.error = 0;
-+
-+	do_mapping_read(in_file->f_mapping,&in_file->f_ra,in_file, ppos, &desc, ipi_send_actor);
-+
-+	if (desc.written)
-+		return desc.written;
-+	return desc.error;
-+}
-+static struct file_operations gemini_ipi_fops = {
-+	.owner	=	THIS_MODULE,
-+	.ioctl	=	gemini_ipi_ioctl,
-+	.open	=	gemini_ipi_open,
-+	.release=	gemini_ipi_release,
-+	.write	=	gemini_ipi_write,
-+	.read	=	gemini_ipi_read,
-+	.sendfile = gemini_ipi_sendfile,
-+};
-+
-+#ifndef STORLINK_IPI
-+#define STORLINK_IPI	242		// Documents/devices.txt suggest to use 240~255 for local driver!!
-+#endif
-+
-+static struct miscdevice gemini_ipi_miscdev =
-+{
-+	STORLINK_IPI,
-+	"slave_ipc",
-+	&gemini_ipi_fops
-+};
-+
-+int __init sl_ipi_init(void)
-+{
-+
-+	printk("Gemini IPI Driver Initialization...\n");
-+	printk("REQ Head :0x%x(phy:0x%x)\n",(unsigned int)req,(unsigned int)SL2312_SRAM_BASE);
-+	printk("RSP Head :0x%x(phy:0x%x)\n",(unsigned int)rsp,(unsigned int)SL2312_SRAM_BASE+0x20);
-+	printk("Data buff:0x%x(phy:0x%x)\n",__phys_to_virt(CPU_1_MEM_BASE+CPU_1_DATA_OFFSET),CPU_1_MEM_BASE+CPU_1_DATA_OFFSET);
-+
-+	misc_register(&gemini_ipi_miscdev);
-+
-+	if (request_irq(IRQ_CPU0_IP_IRQ_OFFSET, ipi_interrupt, SA_INTERRUPT, "ipi", NULL))
-+		printk("Error: Register IRQ for Storlink IPI failed\n");
-+
-+	return 0;
-+}
-+
-+void __exit sl_ipi_exit(void)
-+{
-+
-+}
-+
-+module_init(sl_ipi_init);
-+module_exit(sl_ipi_exit);
-+
-+MODULE_AUTHOR("Jason Lee ");
-+MODULE_DESCRIPTION("Storlink IPI driver");
-+MODULE_LICENSE("GPL");
---- /dev/null
-+++ b/arch/arm/mach-sl2312/hw_xor.h
-@@ -0,0 +1,573 @@
-+/*
-+*  linux/include/asm-arm/xor.h
-+*
-+*  Copyright (C) 2001 Storlink Semi.
-+* 	Jason Lee 
-+*
-+*/
-+#include 
-+#include 
-+//#include 
-+
-+#undef BIG_ENDIAN
-+#define CPU 		0
-+#define DMA 		1
-+
-+#define DESC_NO	8
-+#define TX_DESC_NUM		DESC_NO
-+#define RX_DESC_NUM		DESC_NO
-+
-+#define RAID_BASE_ADDR	IO_ADDRESS(SL2312_RAID_BASE)
-+
-+#define SRAM_PAR_0k		0
-+#define SRAM_PAR_4k		1
-+#define SRAM_PAR_8k		2
-+#define SRAM_PAR_16k		3
-+#define SRAM_PAR_SIZE	SRAM_PAR_8k
-+
-+#define RUNNING	 	0x1
-+#define COMPLETE 	0x2
-+#define ERROR 		0x4
-+
-+#define CMD_XOR		0x0
-+#define CMD_FILL	0x1
-+#define CMD_CPY		0x3
-+#define CMD_CHK		0x4
-+
-+enum RAID_DMA_REGISTER {
-+	RAID_DMA_DEVICE_ID		= 0xff00,
-+	RAID_DMA_STATUS			= 0xff04,
-+	RAID_FCHDMA_CTRL		= 0xff08,
-+	RAID_FCHDMA_FIRST_DESC	= 0xff0C,
-+	RAID_FCHDMA_CURR_DESC	= 0xff10,
-+	RAID_STRDMA_CTRL		= 0xff14,
-+	RAID_STRDMA_FIRST_DESC	= 0xff18,
-+	RAID_STRDMA_CURR_DESC	= 0xff1C,
-+	RAID_TX_FLG_REG			= 0xff24,
-+	RAID_RX_FLG_REG			= 0xff34,
-+	RAID_PCR				= 0xff50,
-+	SMC_CMD_REG				= 0xff60,
-+	SMC_STATUS_REG			= 0xff64
-+	};
-+
-+enum RAID_FUNC_MODE {
-+	RAID_XOR			= 0,
-+	RAID_MIX			= 2,
-+	RAID_SRAM			= 3,
-+	RAID_ENDIAN			= 4,
-+	RAID_MEM_BLK		= 5,
-+	RAID_MEM2MEM		= 7,
-+	RAID_BUF_SIZE		= 8,
-+	RAID_ERR_TEST		= 9,
-+	RAID_BURST			= 10,
-+	RAID_BUS			= 11
-+	};
-+
-+typedef struct reg_info {
-+	int mask;
-+	char err[32];
-+	int offset;
-+} REG_INFO;
-+
-+/********************************************************/
-+/* 	the definition of RAID DMA Module Register      */
-+/********************************************************/
-+typedef union
-+{
-+	unsigned int bit32;
-+	struct bits_ff00
-+	{
-+		#ifdef BIG_ENDIAN
-+		unsigned int  				: 8;
-+		unsigned int teytPerr		: 4; /* define protocol error under tsPErrI*/
-+		unsigned int reytPerr		: 14; /* define protocol error under rsPErrI */
-+		unsigned int device_id		: 12;
-+		unsigned int revision_id	: 4;
-+		#else
-+		unsigned int revision_id	: 4;
-+		unsigned int device_id		: 12;
-+		unsigned int reytPerr		: 14; /* define protocol error under rsPErrI */
-+		unsigned int teytPerr		: 4; /* define protocol error under tsPErrI*/
-+		unsigned int 				: 8;
-+		#endif
-+	} bits;
-+} RAID_DMA_DEVICE_ID_T;
-+
-+typedef union
-+{
-+	unsigned int bits32;
-+	struct bits_ff04
-+	{
-+		#ifdef BIG_ENDIAN
-+		unsigned int tsFinishI		: 1; /* owner bit error interrupt */
-+		unsigned int tsDErrI		: 1; /* AHB bus error interrupt */
-+		unsigned int tsPErrI		: 1; /* RAID XOR fetch descriptor protocol error interrupt */
-+		unsigned int tsEODI			: 1; /* RAID XOR fetch DMA end of descriptor interrupt */
-+		unsigned int tsEOFI			: 1; /* RAID XOR fetch DMA end of frame interrupt */
-+		unsigned int rsFinishI		: 1; /* owner bit error interrupt */
-+		unsigned int rsDErrI 		: 1; /* AHB bus error while RAID XOR store interrupt */
-+		unsigned int rsPErrI		: 1; /* RAID XOR store descriptor protocol error interrupt */
-+		unsigned int rsEODI			: 1; /* RAID XOR store DMA end of descriptor interrupt */
-+		unsigned int rsEOFI			: 1; /* RAID XOR store DMA end of frame interrupt */
-+		unsigned int inter			: 8; /* pattern check error interrupt */
-+		unsigned int 				: 5;
-+		unsigned int Loopback		: 1; /* loopback */
-+		unsigned int intEnable		: 8; /*pattern check error interrupt enable */
-+		#else
-+		unsigned int intEnable		: 8; /*pattern check error interrupt enable */
-+		unsigned int Loopback		: 1; /* loopback */
-+		unsigned int 				: 5;
-+		unsigned int inter			: 8; /* pattern check error interrupt */
-+		unsigned int rsEOFI			: 1; /* RAID XOR store DMA end of frame interrupt */
-+		unsigned int rsEODI			: 1; /* RAID XOR store DMA end of descriptor interrupt */
-+		unsigned int rsPErrI		: 1; /* RAID XOR store descriptor protocol error interrupt */
-+		unsigned int rsDErrI 		: 1; /* AHB bus error while RAID XOR store interrupt */
-+		unsigned int rsFinishI		: 1; /* owner bit error interrupt */
-+		unsigned int tsEOFI			: 1; /* RAID XOR fetch DMA end of frame interrupt */
-+		unsigned int tsEODI			: 1; /* RAID XOR fetch DMA end of descriptor interrupt */
-+		unsigned int tsPErrI		: 1; /* RAID XOR fetch descriptor protocol error interrupt */
-+		unsigned int tsDErrI		: 1; /* AHB bus error interrupt */
-+		unsigned int tsFinishI		: 1; /* owner bit error interrupt */
-+		#endif
-+	} bits;
-+} RAID_DMA_STATUS_T;
-+
-+
-+typedef union
-+{
-+	unsigned int bits32;
-+	struct bits_ff08
-+	{
-+		#ifdef BIG_ENDIAN
-+		unsigned int td_start		:  1;	/* Start DMA transfer */
-+		unsigned int td_continue	:  1;   /* Continue DMA operation */
-+		unsigned int td_chain_mode	:  1;	/* Descriptor Chain Mode;1-Descriptor Chain mode, 0-Direct DMA mode*/
-+		unsigned int 				:  1;
-+		unsigned int td_prot		:  4;	/* DMA protection control */
-+		unsigned int td_burst_size  :  2;	/* DMA max burst size for every AHB request */
-+		unsigned int td_bus		    :  2;	/* peripheral bus width */
-+		unsigned int td_endian		:  1;	/* AHB Endian. 0-little endian; 1-big endian */
-+		unsigned int td_finish_en   :  1;	/* DMA Finish Event Interrupt Enable;1-enable;0-mask */
-+		unsigned int td_fail_en 	:  1;	/* DMA Fail Interrupt Enable;1-enable;0-mask */
-+		unsigned int td_perr_en 	:  1;	/* Protocol Failure Interrupt Enable;1-enable;0-mask */
-+		unsigned int td_eod_en  	:  1;	/* End of Descriptor interrupt Enable;1-enable;0-mask */
-+		unsigned int td_eof_en      :  1;   /* End of frame interrupt Enable;1-enable;0-mask */
-+		unsigned int 				: 14;
-+		#else
-+		unsigned int 				: 14;
-+		unsigned int td_eof_en      :  1;   /* End of frame interrupt Enable;1-enable;0-mask */
-+		unsigned int td_eod_en  	:  1;	/* End of Descriptor interrupt Enable;1-enable;0-mask */
-+		unsigned int td_perr_en 	:  1;	/* Protocol Failure Interrupt Enable;1-enable;0-mask */
-+		unsigned int td_fail_en 	:  1;	/* DMA Fail Interrupt Enable;1-enable;0-mask */
-+		unsigned int td_finish_en   :  1;	/* DMA Finish Event Interrupt Enable;1-enable;0-mask */
-+		unsigned int td_endian		:  1;	/* AHB Endian. 0-little endian; 1-big endian */
-+		unsigned int td_bus		    :  2;	/* peripheral bus width;0 - 8 bits;1 - 16 bits */
-+		unsigned int td_burst_size  :  2;	/* TxDMA max burst size for every AHB request */
-+		unsigned int td_prot		:  4;	/* TxDMA protection control */
-+		unsigned int 				:  1;
-+		unsigned int td_chain_mode	:  1;	/* Descriptor Chain Mode;1-Descriptor Chain mode, 0-Direct DMA mode*/
-+		unsigned int td_continue	:  1;   /* Continue DMA operation */
-+		unsigned int td_start		:  1;	/* Start DMA transfer */
-+		#endif
-+	} bits;
-+} RAID_TXDMA_CTRL_T;
-+
-+typedef union
-+{
-+	unsigned int bits32;
-+	struct bits_ff0c
-+	{
-+		#ifdef BIG_ENDIAN
-+		unsigned int td_first_des_ptr	: 28;/* first descriptor address */
-+		unsigned int td_busy			:  1;/* 1-TxDMA busy; 0-TxDMA idle */
-+		unsigned int 					:  3;
-+		#else
-+		unsigned int 					:  3;
-+		unsigned int td_busy			:  1;/* 1-TxDMA busy; 0-TxDMA idle */
-+		unsigned int td_first_des_ptr	: 28;/* first descriptor address */
-+		#endif
-+	} bits;
-+} RAID_TXDMA_FIRST_DESC_T;
-+
-+typedef union
-+{
-+	unsigned int bits32;
-+	struct bits_ff10
-+	{
-+		#ifdef BIG_ENDIAN
-+		unsigned int ndar			: 28;	/* next descriptor address */
-+		unsigned int eofie			:  1;	/* end of frame interrupt enable */
-+		unsigned int    			:  1;
-+		unsigned int sof_eof    	:  2;
-+		#else
-+		unsigned int sof_eof		:  2;
-+		unsigned int 				:  1;
-+		unsigned int eofie			:  1;	/* end of frame interrupt enable */
-+		unsigned int ndar			: 28;	/* next descriptor address */
-+		#endif
-+	} bits;
-+} RAID_TXDMA_CURR_DESC_T;
-+
-+typedef union
-+{
-+	unsigned int bits32;
-+	struct bits_ff14
-+	{
-+		#ifdef BIG_ENDIAN
-+		unsigned int rd_start		:  1;	/* Start DMA transfer */
-+		unsigned int rd_continue	:  1;   /* Continue DMA operation */
-+		unsigned int rd_chain_mode	:  1;	/* Descriptor Chain Mode;1-Descriptor Chain mode, 0-Direct DMA mode*/
-+		unsigned int 				:  1;
-+		unsigned int rd_prot		:  4;	/* DMA protection control */
-+		unsigned int rd_burst_size  :  2;	/* DMA max burst size for every AHB request */
-+		unsigned int rd_bus		    :  2;	/* peripheral bus width;0 - 8 bits;1 - 16 bits */
-+		unsigned int rd_endian		:  1;	/* AHB Endian. 0-little endian; 1-big endian */
-+		unsigned int rd_finish_en   :  1;	/* DMA Finish Event Interrupt Enable;1-enable;0-mask */
-+		unsigned int rd_fail_en  	:  1;	/* DMA Fail Interrupt Enable;1-enable;0-mask */
-+		unsigned int rd_perr_en 	:  1;	/* Protocol Failure Interrupt Enable;1-enable;0-mask */
-+		unsigned int rd_eod_en  	:  1;	/* End of Descriptor interrupt Enable;1-enable;0-mask */
-+		unsigned int rd_eof_en      :  1;   /* End of frame interrupt Enable;1-enable;0-mask */
-+		unsigned int 				: 14;
-+		#else
-+		unsigned int 				: 14;
-+		unsigned int rd_eof_en      :  1;   /* End of frame interrupt Enable;1-enable;0-mask */
-+		unsigned int rd_eod_en  	:  1;	/* End of Descriptor interrupt Enable;1-enable;0-mask */
-+		unsigned int rd_perr_en 	:  1;	/* Protocol Failure Interrupt Enable;1-enable;0-mask */
-+		unsigned int rd_fail_en  	:  1;	/* DMA Fail Interrupt Enable;1-enable;0-mask */
-+		unsigned int rd_finish_en   :  1;	/* DMA Finish Event Interrupt Enable;1-enable;0-mask */
-+		unsigned int rd_endian		:  1;	/* AHB Endian. 0-little endian; 1-big endian */
-+		unsigned int rd_bus		    :  2;	/* peripheral bus width;0 - 8 bits;1 - 16 bits */
-+		unsigned int rd_burst_size  :  2;	/* DMA max burst size for every AHB request */
-+		unsigned int rd_prot		:  4;	/* DMA protection control */
-+		unsigned int 				:  1;
-+		unsigned int rd_chain_mode	:  1;	/* Descriptor Chain Mode;1-Descriptor Chain mode, 0-Direct DMA mode*/
-+		unsigned int rd_continue	:  1;   /* Continue DMA operation */
-+		unsigned int rd_start		:  1;	/* Start DMA transfer */
-+		#endif
-+	} bits;
-+} RAID_RXDMA_CTRL_T;
-+
-+typedef union
-+{
-+	unsigned int bits32;
-+	struct bits_ff18
-+	{
-+		#ifdef BIG_ENDIAN
-+		unsigned int rd_first_des_ptr	: 28;/* first descriptor address */
-+		unsigned int rd_busy			:  1;/* 1-RxDMA busy; 0-RxDMA idle */
-+		unsigned int 					:  3;
-+		#else
-+		unsigned int 					:  3;
-+		unsigned int rd_busy			:  1;/* 1-RxDMA busy; 0-RxDMA idle */
-+		unsigned int rd_first_des_ptr	: 28;/* first descriptor address */
-+		#endif
-+	} bits;
-+} RAID_RXDMA_FIRST_DESC_T;
-+
-+typedef union
-+{
-+	unsigned int bits32;
-+	struct bits_ff1c
-+	{
-+		#ifdef BIG_ENDIAN
-+		unsigned int ndar			: 28;	/* next descriptor address */
-+		unsigned int eofie			:  1;	/* end of frame interrupt enable */
-+		unsigned int dec			:  1;	/* AHB bus address increment(0)/decrement(1) */
-+		unsigned int sof_eof		:  2;
-+		#else
-+		unsigned int sof_eof		:  2;
-+		unsigned int dec			:  1;	/* AHB bus address increment(0)/decrement(1) */
-+		unsigned int eofie			:  1;	/* end of frame interrupt enable */
-+		unsigned int ndar			: 28;	/* next descriptor address */
-+		#endif
-+	} bits;
-+} RAID_RXDMA_CURR_DESC_T;
-+
-+typedef union
-+{
-+	unsigned int bit32;
-+	struct bits_ff50
-+	{
-+		unsigned int pat			: 32; /* data for pattern check */
-+	} bits;
-+} RAID_PACR_T;
-+
-+/******************************************************/
-+/*	the definition of DMA Descriptor Register     */
-+/******************************************************/
-+typedef struct raid_descriptor_t
-+{
-+	union func_ctrl_t
-+	{
-+		unsigned int bit32;
-+		struct bits_0000
-+		{
-+			#ifdef BIG_ENDIAN
-+			unsigned int own				: 1; /* owner bit */
-+			unsigned int derr				: 1;	/* data error during processing this descriptor */
-+			unsigned int perr				: 1;	/* protocol error during processing this descriptor */
-+			unsigned int raid_ctrl_status	: 7; /* pass RAID XOR fetch/store control status to CPU */
-+			unsigned int desc_cnt			: 6;
-+			unsigned int buffer_size		: 16;	/* transfer buffer size associated with current description*/
-+			#else
-+			unsigned int buffer_size		: 16;	/* transfer buffer size associated with current description*/
-+			unsigned int desc_cnt			: 6;
-+			unsigned int raid_ctrl_status	: 7; /* pass RAID XOR fetch/store control status to CPU */
-+			unsigned int perr				: 1;	/* protocol error during processing this descriptor */
-+			unsigned int derr				: 1;	/* data error during processing this descriptor */
-+			unsigned int own				: 1; /* owner bit */
-+			#endif
-+		} bits;
-+	} func_ctrl;
-+
-+	union flg_status_t
-+	{
-+		unsigned int bits32;
-+		struct bit_004
-+		{
-+			#ifdef BIG_ENDIAN
-+			unsigned int bcc 		: 16;
-+			unsigned int 			: 13
-+			unsigned int mode		: 3;
-+			#else
-+			unsigned int mode		: 3;
-+			unsigned int 			: 13;
-+			unsigned int bcc		: 16;
-+			#endif
-+		} bits_cmd_status;
-+	} flg_status;  //Sanders
-+
-+	unsigned int buf_addr;
-+
-+	union next_desc_addr_t
-+	{
-+		unsigned int bits32;
-+		struct bits_000c
-+		{
-+			#ifdef BIG_ENDIAN
-+			unsigned int ndar 		: 28; /* next descriptor address */
-+			unsigned int eofie		: 1; /* end of frame interrupt enable */
-+			unsigned int 			: 1;
-+			unsigned int sof_eof	: 2; /* the position of the descriptor in chain */
-+			#else
-+			unsigned int sof_eof	: 2; /* the position of the descriptor in chain */
-+			unsigned int 			: 1;
-+			unsigned int eofie		: 1; /* end of frame interrupt enable */
-+			unsigned int ndar 		: 28; /* next descriptor address */
-+			#endif
-+		} bits;
-+	} next_desc_addr;
-+} RAID_DESCRIPTOR_T;
-+
-+/******************************************************/
-+/*	the offset of RAID SMC register		      */
-+/******************************************************/
-+enum RAID_SMC_REGISTER {
-+	RAID_SMC_CMD_REG		= 0xff60,
-+	RAID_SMC_STATUS_REG		= 0xff64
-+	};
-+
-+/******************************************************/
-+/*	the definition of RAID SMC module register    */
-+/******************************************************/
-+typedef union
-+{
-+	unsigned int bits32;
-+	struct bits_ff60
-+	{
-+		#ifdef BIG_ENDIAN
-+		unsigned int pat_mode		: 2; /* partition mode selection */
-+		unsigned int 				: 14;
-+		unsigned int device_id		: 12;
-+		unsigned int revision_id	: 4;
-+		#else
-+		unsigned int revision_id	: 4;
-+		unsigned int device_id		: 12;
-+		unsigned int 				: 14;
-+		unsigned int pat_mode		: 2; /* partition mode selection */
-+		#endif
-+	} bits;
-+} RAID_SMC_CMD;
-+
-+typedef union
-+{
-+	unsigned int bits32;
-+	struct bits_ff64
-+	{
-+		#ifdef BIG_ENDIAN
-+		unsigned int addr_err1		: 1; /* address is out of range for controller 1 */
-+		unsigned int ahb_err1		: 1; /* AHB bus error for controller 1 */
-+		unsigned int 				: 14;
-+		unsigned int addr_err2		: 1;	/* address is out of range for controller 2 */
-+		unsigned int ahb_err2		: 1; /* AHB bus error for controller 2 */
-+		unsigned int 				: 14;
-+		#else
-+		unsigned int 				: 14;
-+		unsigned int ahb_err2		: 1; /* AHB bus error for controller 2 */
-+		unsigned int addr_err2		: 1;	/* address is out of range for controller 2 */
-+		unsigned int 				: 14;
-+		unsigned int ahb_err1		: 1; /* AHB bus error for controller 1 */
-+		unsigned int addr_err1		: 1; /* address is out of range for controller 1 */
-+		#endif
-+	} bits;
-+} RAID_SMC_STATUS;
-+
-+typedef struct RAID_S
-+{
-+	const char *device_name;
-+	wait_queue_head_t wait;
-+	unsigned int busy;
-+	int irq;
-+	unsigned int status;
-+	RAID_DESCRIPTOR_T *tx_desc;  /*   point to virtual TX descriptor address */
-+	RAID_DESCRIPTOR_T *rx_desc;  /* point ot virtual RX descriptor address */
-+	RAID_DESCRIPTOR_T *tx_cur_desc; /* current TX descriptor */
-+	RAID_DESCRIPTOR_T *rx_cur_desc; /* current RX descriptor */
-+	RAID_DESCRIPTOR_T *tx_finished_desc;
-+	RAID_DESCRIPTOR_T *rx_finished_desc;
-+	RAID_DESCRIPTOR_T *tx_first_desc;
-+	RAID_DESCRIPTOR_T *rx_first_desc;
-+
-+//	unsigned int *tx_buf[TX_DESC_NUM];
-+	unsigned int *rx_desc_dma;			// physical address of rx_descript
-+	unsigned int *tx_desc_dma;			// physical address of tx_descript
-+	unsigned int *rx_bufs_dma;
-+	unsigned int *tx_bufs_dma;
-+
-+} RAID_T;
-+
-+struct reg_ioctl
-+{
-+	unsigned int reg_addr;
-+	unsigned int val_in;
-+	unsigned int val_out;
-+};
-+
-+typedef struct dma_ctrl {
-+	int sram;
-+	int prot;
-+	int burst;
-+	int bus;
-+	int endian;
-+	int mode;
-+} DMA_CTRL;
-+
-+
-+#ifdef XOR_SW_FILL_IN
-+
-+#define __XOR(a1, a2) a1 ^= a2
-+
-+#define GET_BLOCK_2(dst) \
-+	__asm__("ldmia	%0, {%1, %2}" \
-+		: "=r" (dst), "=r" (a1), "=r" (a2) \
-+		: "0" (dst))
-+
-+#define GET_BLOCK_4(dst) \
-+	__asm__("ldmia	%0, {%1, %2, %3, %4}" \
-+		: "=r" (dst), "=r" (a1), "=r" (a2), "=r" (a3), "=r" (a4) \
-+		: "0" (dst))
-+
-+#define XOR_BLOCK_2(src) \
-+	__asm__("ldmia	%0!, {%1, %2}" \
-+		: "=r" (src), "=r" (b1), "=r" (b2) \
-+		: "0" (src)); \
-+	__XOR(a1, b1); __XOR(a2, b2);
-+
-+#define XOR_BLOCK_4(src) \
-+	__asm__("ldmia	%0!, {%1, %2, %3, %4}" \
-+		: "=r" (src), "=r" (b1), "=r" (b2), "=r" (b3), "=r" (b4) \
-+		: "0" (src)); \
-+	__XOR(a1, b1); __XOR(a2, b2); __XOR(a3, b3); __XOR(a4, b4)
-+
-+#define PUT_BLOCK_2(dst) \
-+	__asm__ __volatile__("stmia	%0!, {%2, %3}" \
-+		: "=r" (dst) \
-+		: "0" (dst), "r" (a1), "r" (a2))
-+
-+#define PUT_BLOCK_4(dst) \
-+	__asm__ __volatile__("stmia	%0!, {%2, %3, %4, %5}" \
-+		: "=r" (dst) \
-+		: "0" (dst), "r" (a1), "r" (a2), "r" (a3), "r" (a4))
-+
-+static void
-+xor_arm4regs_2(unsigned long bytes, unsigned long *p1, unsigned long *p2)
-+{
-+	unsigned int lines = bytes / sizeof(unsigned long) / 4;
-+	register unsigned int a1 __asm__("r4");
-+	register unsigned int a2 __asm__("r5");
-+	register unsigned int a3 __asm__("r6");
-+	register unsigned int a4 __asm__("r7");
-+	register unsigned int b1 __asm__("r8");
-+	register unsigned int b2 __asm__("r9");
-+	register unsigned int b3 __asm__("ip");
-+	register unsigned int b4 __asm__("lr");
-+
-+	do {
-+		GET_BLOCK_4(p1);
-+		XOR_BLOCK_4(p2);
-+		PUT_BLOCK_4(p1);
-+	} while (--lines);
-+}
-+
-+static void
-+xor_arm4regs_3(unsigned long bytes, unsigned long *p1, unsigned long *p2,
-+		unsigned long *p3)
-+{
-+	unsigned int lines = bytes / sizeof(unsigned long) / 4;
-+	register unsigned int a1 __asm__("r4");
-+	register unsigned int a2 __asm__("r5");
-+	register unsigned int a3 __asm__("r6");
-+	register unsigned int a4 __asm__("r7");
-+	register unsigned int b1 __asm__("r8");
-+	register unsigned int b2 __asm__("r9");
-+	register unsigned int b3 __asm__("ip");
-+	register unsigned int b4 __asm__("lr");
-+
-+	do {
-+		GET_BLOCK_4(p1);
-+		XOR_BLOCK_4(p2);
-+		XOR_BLOCK_4(p3);
-+		PUT_BLOCK_4(p1);
-+	} while (--lines);
-+}
-+
-+static void
-+xor_arm4regs_4(unsigned long bytes, unsigned long *p1, unsigned long *p2,
-+		unsigned long *p3, unsigned long *p4)
-+{
-+	unsigned int lines = bytes / sizeof(unsigned long) / 2;
-+	register unsigned int a1 __asm__("r8");
-+	register unsigned int a2 __asm__("r9");
-+	register unsigned int b1 __asm__("ip");
-+	register unsigned int b2 __asm__("lr");
-+
-+	do {
-+		GET_BLOCK_2(p1);
-+		XOR_BLOCK_2(p2);
-+		XOR_BLOCK_2(p3);
-+		XOR_BLOCK_2(p4);
-+		PUT_BLOCK_2(p1);
-+	} while (--lines);
-+}
-+
-+static void
-+xor_arm4regs_5(unsigned long bytes, unsigned long *p1, unsigned long *p2,
-+		unsigned long *p3, unsigned long *p4, unsigned long *p5)
-+{
-+	unsigned int lines = bytes / sizeof(unsigned long) / 2;
-+	register unsigned int a1 __asm__("r8");
-+	register unsigned int a2 __asm__("r9");
-+	register unsigned int b1 __asm__("ip");
-+	register unsigned int b2 __asm__("lr");
-+
-+	do {
-+		GET_BLOCK_2(p1);
-+		XOR_BLOCK_2(p2);
-+		XOR_BLOCK_2(p3);
-+		XOR_BLOCK_2(p4);
-+		XOR_BLOCK_2(p5);
-+		PUT_BLOCK_2(p1);
-+	} while (--lines);
-+}
-+#endif	//XOR_SW_FILL_IN
-+
---- /dev/null
-+++ b/arch/arm/mach-sl2312/irq.c
-@@ -0,0 +1,202 @@
-+/*
-+ *  linux/arch/arm/mach-epxa10db/irq.c
-+ *
-+ *  Copyright (C) 2001 Altera Corporation
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
-+ */
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+
-+#ifdef CONFIG_PCI
-+#include 
-+#endif
-+
-+int fixup_irq(unsigned int irq)
-+{
-+#ifdef CONFIG_PCI
-+	if (irq == IRQ_PCI) {
-+		return sl2312_pci_get_int_src();
-+	}
-+#endif
-+	return irq;
-+}
-+
-+static void sl2312_ack_irq(unsigned int irq)
-+{
-+   __raw_writel(1 << irq, IRQ_CLEAR(IO_ADDRESS(SL2312_INTERRUPT_BASE)));
-+}
-+
-+static void sl2312_mask_irq(unsigned int irq)
-+{
-+	unsigned int mask;
-+
-+#ifdef CONFIG_PCI
-+	if (irq >= PCI_IRQ_OFFSET)
-+	{
-+		mask = __raw_readl(IRQ_MASK(IO_ADDRESS(SL2312_INTERRUPT_BASE)));
-+		mask &= ~IRQ_PCI_MASK ;
-+		__raw_writel(mask, IRQ_MASK(IO_ADDRESS(SL2312_INTERRUPT_BASE)));
-+		sl2312_pci_mask_irq(irq - PCI_IRQ_OFFSET);
-+	}
-+	else
-+#endif
-+	if(irq >= FIQ_OFFSET)
-+	{
-+           mask = __raw_readl(FIQ_MASK(IO_ADDRESS(SL2312_INTERRUPT_BASE)));
-+           mask &= ~(1 << (irq - FIQ_OFFSET));
-+           __raw_writel(mask, FIQ_MASK(IO_ADDRESS(SL2312_INTERRUPT_BASE)));
-+        }
-+        else
-+        {
-+           mask = __raw_readl(IRQ_MASK(IO_ADDRESS(SL2312_INTERRUPT_BASE)));
-+           mask &= ~(1 << irq);
-+           __raw_writel(mask, IRQ_MASK(IO_ADDRESS(SL2312_INTERRUPT_BASE)));
-+        }
-+
-+}
-+
-+static void sl2312_unmask_irq(unsigned int irq)
-+{
-+	unsigned int mask;
-+
-+#ifdef CONFIG_PCI
-+	if (irq >= PCI_IRQ_OFFSET)
-+	{
-+		mask = __raw_readl(IRQ_MASK(IO_ADDRESS(SL2312_INTERRUPT_BASE)));
-+		mask |= IRQ_PCI_MASK ;
-+		__raw_writel(mask, IRQ_MASK(IO_ADDRESS(SL2312_INTERRUPT_BASE)));
-+		sl2312_pci_unmask_irq(irq - PCI_IRQ_OFFSET);
-+	}
-+	else
-+#endif
-+	if(irq >= FIQ_OFFSET)
-+        {
-+          mask = __raw_readl(FIQ_MASK(IO_ADDRESS(SL2312_INTERRUPT_BASE)));
-+          mask |= (1 << (irq - FIQ_OFFSET));
-+          __raw_writel(mask, FIQ_MASK(IO_ADDRESS(SL2312_INTERRUPT_BASE)));
-+	}
-+        else
-+        {
-+          mask = __raw_readl(IRQ_MASK(IO_ADDRESS(SL2312_INTERRUPT_BASE)));
-+          mask |= (1 << irq);
-+          __raw_writel(mask, IRQ_MASK(IO_ADDRESS(SL2312_INTERRUPT_BASE)));
-+        }
-+}
-+
-+static struct irq_chip sl2312_level_irq = {
-+        .ack            = sl2312_mask_irq,
-+        .mask           = sl2312_mask_irq,
-+        .unmask         = sl2312_unmask_irq,
-+//		.set_type	= ixp4xx_set_irq_type,
-+};
-+
-+static struct irq_chip sl2312_edge_irq = {
-+        .ack            = sl2312_ack_irq,
-+        .mask           = sl2312_mask_irq,
-+        .unmask         = sl2312_unmask_irq,
-+//		.set_type	= ixp4xx_set_irq_type,
-+};
-+
-+static struct resource irq_resource = {
-+        .name   = "irq_handler",
-+        .start  = IO_ADDRESS(SL2312_INTERRUPT_BASE),
-+        .end    = IO_ADDRESS(FIQ_STATUS(SL2312_INTERRUPT_BASE))+4,
-+};
-+
-+void __init sl2312_init_irq(void)
-+{
-+	unsigned int i, mode, level;
-+
-+    request_resource(&iomem_resource, &irq_resource);
-+
-+	for (i = 0; i < NR_IRQS; i++)
-+	{
-+	    if((i>=IRQ_TIMER1 && i<=IRQ_TIMER3)||(i>=IRQ_SERIRQ0 && i<=IRQ_SERIRQ_MAX))
-+        {
-+	        set_irq_chip(i, &sl2312_edge_irq);
-+	        set_irq_handler(i, handle_edge_irq);
-+        }
-+	    else
-+        {
-+	        set_irq_chip(i, &sl2312_level_irq);
-+            set_irq_handler(i,handle_level_irq);
-+        }
-+        set_irq_flags(i, IRQF_VALID | IRQF_PROBE);
-+	}
-+
-+	/* Disable all interrupt */
-+	__raw_writel(0,IRQ_MASK(IO_ADDRESS(SL2312_INTERRUPT_BASE)));
-+	__raw_writel(0,FIQ_MASK(IO_ADDRESS(SL2312_INTERRUPT_BASE)));
-+
-+	/* Set interrupt mode */
-+    /* emac & ipsec type is level trigger and high active */
-+    mode = __raw_readl(IRQ_TMODE(IO_ADDRESS(SL2312_INTERRUPT_BASE)));
-+    level = __raw_readl(IRQ_TLEVEL(IO_ADDRESS(SL2312_INTERRUPT_BASE)));
-+
-+	mode &= ~IRQ_GMAC0_MASK;
-+	level &= ~IRQ_GMAC0_MASK;
-+
-+	mode &= ~IRQ_GMAC1_MASK;
-+	level &= ~IRQ_GMAC1_MASK;
-+
-+	mode &= ~IRQ_IPSEC_MASK;
-+	level &= ~IRQ_IPSEC_MASK;
-+
-+	// for IDE0,1, high active and level trigger
-+	mode &= ~IRQ_IDE0_MASK;
-+	level &= ~IRQ_IDE0_MASK;
-+	mode &= ~IRQ_IDE1_MASK;
-+	level &= ~IRQ_IDE1_MASK;
-+
-+
-+	// for PCI, high active and level trigger
-+	mode &= ~IRQ_PCI_MASK;
-+	level &= ~IRQ_PCI_MASK;
-+
-+	// for USB, high active and level trigger
-+	mode &= ~IRQ_USB0_MASK;
-+	level &= ~IRQ_USB0_MASK;
-+
-+	mode &= ~IRQ_USB1_MASK;
-+	level &= ~IRQ_USB1_MASK;
-+
-+	// for LPC, high active and edge trigger
-+	mode |= 0xffff0000;
-+	level &= 0x0000ffff;
-+
-+	// for GPIO, high active and level trigger
-+	mode &= ~(IRQ_GPIO_MASK);
-+	level &= ~(IRQ_GPIO_MASK);
-+
-+	mode &= ~(IRQ_GPIO1_MASK);
-+	level &= ~(IRQ_GPIO1_MASK);
-+
-+	mode &= ~(IRQ_GPIO2_MASK);
-+	level &= ~(IRQ_GPIO2_MASK);
-+
-+	__raw_writel(mode,IRQ_TMODE(IO_ADDRESS(SL2312_INTERRUPT_BASE)));
-+	__raw_writel(level,IRQ_TLEVEL(IO_ADDRESS(SL2312_INTERRUPT_BASE)));
-+
-+}
---- /dev/null
-+++ b/arch/arm/mach-sl2312/lpc.c
-@@ -0,0 +1,125 @@
-+/*
-+ *
-+ * BRIEF MODULE DESCRIPTION
-+ *	ITE Semi IT8712 Super I/O functions.
-+ *
-+ * Copyright 2001 MontaVista Software Inc.
-+ * Author: MontaVista Software, Inc.
-+ *         	ppopov@mvista.com or source@mvista.com
-+ *
-+ *  This program is free software; you can redistribute  it and/or modify it
-+ *  under  the terms of  the GNU General  Public License as published by the
-+ *  Free Software Foundation;  either version 2 of the  License, or (at your
-+ *  option) any later version.
-+ *
-+ *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
-+ *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
-+ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
-+ *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
-+ *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
-+ *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
-+ *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
-+ *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
-+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
-+ *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ *
-+ *  You should have received a copy of the  GNU General Public License along
-+ *  with this program; if not, write  to the Free Software Foundation, Inc.,
-+ *  675 Mass Ave, Cambridge, MA 02139, USA.
-+ */
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+
-+#ifndef TRUE
-+#define TRUE 1
-+#endif
-+
-+#ifndef FALSE
-+#define FALSE 0
-+#endif
-+
-+
-+// MB PnP configuration register
-+#define LPC_KEY_ADDR	(IO_ADDRESS(SL2312_LPC_IO_BASE) + 0x2e)
-+#define LPC_DATA_ADDR	(IO_ADDRESS(SL2312_LPC_IO_BASE) + 0x2f)
-+
-+#define LPC_BUS_CTRL			*(volatile unsigned char*) (IO_ADDRESS(SL2312_LPC_HOST_BASE) + 0)
-+#define LPC_BUS_STATUS			*(volatile unsigned char*) (IO_ADDRESS(SL2312_LPC_HOST_BASE) + 2)
-+#define LPC_SERIAL_IRQ_CTRL		*(volatile unsigned char*) (IO_ADDRESS(SL2312_LPC_HOST_BASE) + 4)
-+
-+int it8712_exist;
-+
-+static void LPCEnterMBPnP(void)
-+{
-+	int i;
-+	unsigned char key[4] = {0x87, 0x01, 0x55, 0x55};
-+
-+	for (i = 0; i<4; i++)
-+		outb(key[i], LPC_KEY_ADDR);
-+
-+}
-+
-+static void LPCExitMBPnP(void)
-+{
-+	outb(0x02, LPC_KEY_ADDR);
-+	outb(0x02, LPC_DATA_ADDR);
-+}
-+
-+void LPCSetConfig(char LdnNumber, char Index, char data)
-+{
-+	LPCEnterMBPnP();				// Enter IT8712 MB PnP mode
-+	outb(0x07, LPC_KEY_ADDR);
-+	outb(LdnNumber, LPC_DATA_ADDR);
-+	outb(Index, LPC_KEY_ADDR);
-+	outb(data, LPC_DATA_ADDR);
-+	LPCExitMBPnP();
-+}
-+
-+char LPCGetConfig(char LdnNumber, char Index)
-+{
-+	char rtn;
-+
-+	LPCEnterMBPnP();				// Enter IT8712 MB PnP mode
-+	outb(0x07, LPC_KEY_ADDR);
-+	outb(LdnNumber, LPC_DATA_ADDR);
-+	outb(Index, LPC_KEY_ADDR);
-+	rtn = inb(LPC_DATA_ADDR);
-+	LPCExitMBPnP();
-+	return rtn;
-+}
-+
-+static int SearchIT8712(void)
-+{
-+	unsigned char Id1, Id2;
-+	unsigned short Id;
-+
-+	LPCEnterMBPnP();
-+	outb(0x20, LPC_KEY_ADDR); /* chip id byte 1 */
-+	Id1 = inb(LPC_DATA_ADDR);
-+	outb(0x21, LPC_KEY_ADDR); /* chip id byte 2 */
-+	Id2 = inb(LPC_DATA_ADDR);
-+	Id = (Id1 << 8) | Id2;
-+	LPCExitMBPnP();
-+	if (Id == 0x8712)
-+		return TRUE;
-+	else
-+		return FALSE;
-+}
-+
-+int InitLPCInterface(void)
-+{
-+	LPC_BUS_CTRL = 0xc0;
-+	LPC_SERIAL_IRQ_CTRL = 0xc0;
-+	mdelay(1);		// wait for 1 serial IRQ cycle
-+	LPC_SERIAL_IRQ_CTRL = 0x80;
-+	it8712_exist = SearchIT8712();
-+	printk("IT8712 %s exist\n", it8712_exist?"":"doesn't");
-+	return 0;
-+}
-+
-+//__initcall(InitLPCInterface);
---- /dev/null
-+++ b/arch/arm/mach-sl2312/mm.c
-@@ -0,0 +1,80 @@
-+/*
-+ *  linux/arch/arm/mach-epxa10db/mm.c
-+ *
-+ *  MM routines for Altera'a Epxa10db board
-+ *
-+ *  Copyright (C) 2001 Altera Corporation
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
-+ */
-+#include 
-+#include 
-+#include 
-+
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+
-+#include 
-+
-+/* Page table mapping for I/O region */
-+static struct map_desc sl2312_io_desc[] __initdata = {
-+#ifdef CONFIG_GEMINI_IPI
-+{__phys_to_virt(CPU_1_MEM_BASE),         __phys_to_pfn(CPU_1_MEM_BASE),        SZ_64M,  MT_MEMORY},
-+#endif
-+{IO_ADDRESS(SL2312_SRAM_BASE),         __phys_to_pfn(SL2312_SRAM_BASE),        SZ_512K,  MT_DEVICE},
-+{IO_ADDRESS(SL2312_DRAM_CTRL_BASE),    __phys_to_pfn(SL2312_DRAM_CTRL_BASE),   SZ_512K,  MT_DEVICE},
-+{IO_ADDRESS(SL2312_GLOBAL_BASE),       __phys_to_pfn(SL2312_GLOBAL_BASE),      SZ_512K,  MT_DEVICE},
-+{IO_ADDRESS(SL2312_WAQTCHDOG_BASE),    __phys_to_pfn(SL2312_WAQTCHDOG_BASE),   SZ_512K,  MT_DEVICE},
-+{IO_ADDRESS(SL2312_UART_BASE),         __phys_to_pfn(SL2312_UART_BASE),        SZ_512K,  MT_DEVICE},
-+{IO_ADDRESS(SL2312_TIMER_BASE),        __phys_to_pfn(SL2312_TIMER_BASE),       SZ_512K,  MT_DEVICE},
-+{IO_ADDRESS(SL2312_LCD_BASE),          __phys_to_pfn(SL2312_LCD_BASE),         SZ_512K,  MT_DEVICE},
-+{IO_ADDRESS(SL2312_RTC_BASE),          __phys_to_pfn(SL2312_RTC_BASE),         SZ_512K,  MT_DEVICE},
-+{IO_ADDRESS(SL2312_SATA_BASE),         __phys_to_pfn(SL2312_SATA_BASE),        SZ_512K,  MT_DEVICE},
-+{IO_ADDRESS(SL2312_LPC_HOST_BASE),     __phys_to_pfn(SL2312_LPC_HOST_BASE),    SZ_512K,  MT_DEVICE},
-+{IO_ADDRESS(SL2312_LPC_IO_BASE),       __phys_to_pfn(SL2312_LPC_IO_BASE),      SZ_512K,  MT_DEVICE},
-+{IO_ADDRESS(SL2312_INTERRUPT_BASE),    __phys_to_pfn(SL2312_INTERRUPT_BASE),   SZ_512K,  MT_DEVICE},
-+{IO_ADDRESS(SL2312_INTERRUPT1_BASE),   __phys_to_pfn(SL2312_INTERRUPT1_BASE),  SZ_512K,  MT_DEVICE},
-+{IO_ADDRESS(SL2312_SSP_CTRL_BASE),     __phys_to_pfn(SL2312_SSP_CTRL_BASE),    SZ_512K,  MT_DEVICE},
-+{IO_ADDRESS(SL2312_POWER_CTRL_BASE),   __phys_to_pfn(SL2312_POWER_CTRL_BASE),  SZ_512K,  MT_DEVICE},
-+{IO_ADDRESS(SL2312_CIR_BASE),          __phys_to_pfn(SL2312_CIR_BASE),         SZ_512K,  MT_DEVICE},
-+{IO_ADDRESS(SL2312_GPIO_BASE),         __phys_to_pfn(SL2312_GPIO_BASE),        SZ_512K,  MT_DEVICE},
-+{IO_ADDRESS(SL2312_GPIO_BASE1),        __phys_to_pfn(SL2312_GPIO_BASE1),       SZ_512K,  MT_DEVICE},
-+{IO_ADDRESS(SL2312_GPIO_BASE2),        __phys_to_pfn(SL2312_GPIO_BASE2),       SZ_512K,  MT_DEVICE},
-+{IO_ADDRESS(SL2312_PCI_IO_BASE),	   __phys_to_pfn(SL2312_PCI_IO_BASE),      SZ_512K,  MT_DEVICE},
-+{IO_ADDRESS(SL2312_PCI_MEM_BASE),	   __phys_to_pfn(SL2312_PCI_MEM_BASE),	   SZ_512K,  MT_DEVICE},
-+#ifdef CONFIG_NET_SL351X
-+{IO_ADDRESS(SL2312_TOE_BASE),    	__phys_to_pfn(SL2312_TOE_BASE)       ,   SZ_512K,  MT_DEVICE},
-+#endif
-+{IO_ADDRESS(SL2312_GMAC0_BASE),	       __phys_to_pfn(SL2312_GMAC0_BASE),	   SZ_512K,  MT_DEVICE},
-+{IO_ADDRESS(SL2312_GMAC1_BASE),	       __phys_to_pfn(SL2312_GMAC1_BASE),	   SZ_512K,  MT_DEVICE},
-+{IO_ADDRESS(SL2312_SECURITY_BASE),     __phys_to_pfn(SL2312_SECURITY_BASE),    SZ_512K,  MT_DEVICE},
-+{IO_ADDRESS(SL2312_IDE0_BASE),         __phys_to_pfn(SL2312_IDE0_BASE),        SZ_512K,  MT_DEVICE},
-+{IO_ADDRESS(SL2312_IDE1_BASE),         __phys_to_pfn(SL2312_IDE1_BASE),        SZ_512K,  MT_DEVICE},
-+{IO_ADDRESS(SL2312_RAID_BASE),         __phys_to_pfn(SL2312_RAID_BASE),        SZ_512K,  MT_DEVICE},
-+{IO_ADDRESS(SL2312_FLASH_CTRL_BASE),   __phys_to_pfn(SL2312_FLASH_CTRL_BASE),  SZ_512K,  MT_DEVICE},
-+{IO_ADDRESS(SL2312_DRAM_CTRL_BASE),    __phys_to_pfn(SL2312_DRAM_CTRL_BASE),   SZ_512K,  MT_DEVICE},
-+{IO_ADDRESS(SL2312_GENERAL_DMA_BASE),  __phys_to_pfn(SL2312_GENERAL_DMA_BASE), SZ_512K,  MT_DEVICE},
-+{IO_ADDRESS(SL2312_USB0_BASE),         __phys_to_pfn(SL2312_USB_BASE),         SZ_512K,  MT_DEVICE},
-+{IO_ADDRESS(SL2312_USB1_BASE),         __phys_to_pfn(SL2312_USB1_BASE),        SZ_512K,  MT_DEVICE},
-+{FLASH_VADDR(SL2312_FLASH_BASE),       __phys_to_pfn(SL2312_FLASH_BASE),       SZ_16M,    MT_DEVICE},
-+};
-+
-+void __init sl2312_map_io(void)
-+{
-+	iotable_init(sl2312_io_desc, ARRAY_SIZE(sl2312_io_desc));
-+}
---- /dev/null
-+++ b/arch/arm/mach-sl2312/pci.c
-@@ -0,0 +1,359 @@
-+/*
-+ *  linux/arch/arm/mach-sl2312/pci_sl2312.c
-+ *
-+ *  PCI functions for sl2312 host PCI bridge
-+ *
-+ *  Copyright (C) 2003 StorLink Corp.
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
-+ */
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+
-+#include 
-+
-+//#define DEBUG
-+
-+// sl2312 PCI bridge access routines
-+
-+#define PCI_IOSIZE_REG	(*(volatile unsigned long *) (IO_ADDRESS(SL2312_PCI_IO_BASE)))
-+#define PCI_PROT_REG	(*(volatile unsigned long *) (IO_ADDRESS(SL2312_PCI_IO_BASE) + 0x04))
-+#define PCI_CTRL_REG	(*(volatile unsigned long *) (IO_ADDRESS(SL2312_PCI_IO_BASE) + 0x08))
-+#define PCI_SOFTRST_REG	(*(volatile unsigned long *) (IO_ADDRESS(SL2312_PCI_IO_BASE) + 0x10))
-+#define PCI_CONFIG_REG	(*(volatile unsigned long *) (IO_ADDRESS(SL2312_PCI_IO_BASE) + 0x28))
-+#define PCI_DATA_REG	(*(volatile unsigned long *) (IO_ADDRESS(SL2312_PCI_IO_BASE) + 0x2C))
-+
-+static spinlock_t sl2312_pci_lock = SPIN_LOCK_UNLOCKED;
-+// for initialize PCI devices
-+struct resource pci_ioport_resource = {
-+		.name = "PCI I/O Space",
-+		.start = IO_ADDRESS(SL2312_PCI_IO_BASE) + 0x100,
-+		.end = IO_ADDRESS(SL2312_PCI_IO_BASE) + SZ_512K - 1,
-+		.flags = IORESOURCE_IO,
-+};
-+struct resource pci_iomem_resource = {
-+		.name = "PCI Mem Space",
-+		.start = SL2312_PCI_MEM_BASE,
-+		.end = SL2312_PCI_MEM_BASE + SZ_128M - 1,
-+		.flags = IORESOURCE_MEM,
-+};
-+
-+static int sl2312_read_config(struct pci_bus *bus, unsigned int devfn, int where,int size, u32 *val)
-+{
-+	unsigned long addr,data;
-+	unsigned long flags;
-+
-+	spin_lock_irqsave(&sl2312_pci_lock, flags);
-+    addr = 0x80000000 | (PCI_SLOT(devfn) << 11) | (PCI_FUNC(devfn) << 8) | (where & ~3);
-+	PCI_CONFIG_REG = addr;
-+	data = PCI_DATA_REG;
-+
-+	switch (size) {
-+	case 1:
-+	    *val = (u8) (data >> ((where & 0x03) * 8));
-+		break;
-+	case 2:
-+	    *val = (u16) (data >> ((where & 0x02) * 8));
-+		break;
-+	case 4:
-+	    *val = data;
-+    	if ((where >= 0x10) && (where <= 0x24)) {
-+    		if ((*val & 0xfff00000) == SL2312_PCI_IO_BASE) {
-+    			*val &= 0x000fffff;
-+    			*val |= IO_ADDRESS(SL2312_PCI_IO_BASE);
-+    		}
-+    	}
-+		break;
-+	}
-+	spin_unlock_irqrestore(&sl2312_pci_lock, flags);
-+//	printk("READ==>slot=%d fn=%d where=%d value=%x\n",PCI_SLOT(devfn),PCI_FUNC(devfn),where,*val);
-+	return PCIBIOS_SUCCESSFUL;
-+}
-+
-+static int sl2312_write_config(struct pci_bus *bus, unsigned int devfn, int where,int size, u32 val)
-+{
-+	unsigned long addr,data;
-+	unsigned long flags;
-+
-+	spin_lock_irqsave(&sl2312_pci_lock, flags);
-+    addr = 0x80000000 | (PCI_SLOT(devfn) << 11) | (PCI_FUNC(devfn) << 8) | (where & ~3);
-+	PCI_CONFIG_REG = addr;
-+	data = PCI_DATA_REG;
-+
-+	switch (size) {
-+	case 1:
-+    	data &= ~(0xff << ((where & 0x03) * 8));
-+    	data |= (val << ((where & 0x03) * 8));
-+    	PCI_DATA_REG = data;
-+		break;
-+	case 2:
-+    	data &= ~(0xffff << ((where & 0x02) * 8));
-+    	data |= (val << ((where & 0x02) * 8));
-+    	PCI_DATA_REG = data;
-+		break;
-+	case 4:
-+    	if ((where >= 0x10) && (where <= 0x24)) {
-+    		if ((val & 0xfff00000) == IO_ADDRESS(SL2312_PCI_IO_BASE)) {
-+    			val &= 0x000fffff;
-+    			val |= SL2312_PCI_IO_BASE;
-+    		}
-+    	}
-+	    PCI_DATA_REG = val;
-+		break;
-+	}
-+	spin_unlock_irqrestore(&sl2312_pci_lock, flags);
-+
-+//	printk("WRITE==> slot=%d fn=%d where=%d value=%x \n",PCI_SLOT(devfn),PCI_FUNC(devfn),where,val);
-+	return PCIBIOS_SUCCESSFUL;
-+}
-+
-+static struct pci_ops sl2312_pci_ops = {
-+	.read	= sl2312_read_config,
-+	.write	= sl2312_write_config,
-+};
-+
-+
-+int __init sl2312_pci_setup_resources(struct resource **resource)
-+{
-+	PCI_IOSIZE_REG = 0;		// 1M IO size
-+	PCI_CTRL_REG = 0x06;
-+
-+	resource[0] = &pci_ioport_resource;
-+	resource[1] = &pci_iomem_resource;
-+	resource[2] = NULL;
-+
-+	return 1;
-+}
-+
-+//static int sl2312_pci_fault(unsigned long addr, struct pt_regs *regs)
-+//{
-+//	return 1;
-+//}
-+
-+
-+/**********************************************************************
-+ * MASK(disable) PCI interrupt
-+ *    0: PCI INTA, 1: PCI INTB, ...		// for Linux interrupt routing
-+ *   16: PERR								// for PCI module internal use
-+ *   17: SERR,.. respect to PCI CTRL2 REG
-+ **********************************************************************/
-+void sl2312_pci_mask_irq(unsigned int irq)
-+{
-+    struct pci_bus bus;
-+	unsigned int tmp;
-+
-+    bus.number = 0;
-+    sl2312_read_config(&bus, 0, SL2312_PCI_CTRL2, 4, &tmp);
-+	if (irq < 16) {						// for linux int routing
-+		tmp &= ~(1 << (irq + 16 + 6));
-+	}
-+	else {
-+		tmp &= ~(1 << irq);
-+	}
-+    sl2312_write_config(&bus, 0, SL2312_PCI_CTRL2, 4, tmp);
-+}
-+
-+/* UNMASK(enable) PCI interrupt */
-+void sl2312_pci_unmask_irq(unsigned int irq)
-+{
-+    struct pci_bus bus;
-+	unsigned int tmp;
-+
-+    bus.number = 0;
-+    sl2312_read_config(&bus, 0, SL2312_PCI_CTRL2, 4, &tmp);
-+	if (irq < 16) {						// for linux int routing
-+		tmp |= (1 << (irq + 16 + 6));
-+	}
-+	else {
-+		tmp |= (1 << irq);
-+	}
-+    sl2312_write_config(&bus, 0, SL2312_PCI_CTRL2, 4, tmp);
-+}
-+
-+/* Get PCI interrupt source */
-+int sl2312_pci_get_int_src(void)
-+{
-+    struct pci_bus bus;
-+	unsigned int tmp=0;
-+
-+    bus.number = 0;
-+    sl2312_read_config(&bus, 0, SL2312_PCI_CTRL2, 4, &tmp);
-+	if (tmp & (1 << 28)) { 		// PCI INTA
-+        sl2312_write_config(&bus, 0, SL2312_PCI_CTRL2, 4, tmp);
-+		return IRQ_PCI_INTA;
-+	}
-+	if (tmp & (1 << 29)) {		// PCI INTB
-+        sl2312_write_config(&bus, 0, SL2312_PCI_CTRL2, 4, tmp);
-+		return IRQ_PCI_INTB;
-+	}
-+	if (tmp & (1 << 30)) {		// PCI INTC
-+        sl2312_write_config(&bus, 0, SL2312_PCI_CTRL2, 4, tmp);
-+		return IRQ_PCI_INTC;
-+	}
-+	if (tmp & (1 << 31)) {		// PCI INTD
-+        sl2312_write_config(&bus, 0, SL2312_PCI_CTRL2, 4, tmp);
-+		return IRQ_PCI_INTD;
-+	}
-+	// otherwise, it should be a PCI error
-+	return IRQ_PCI;
-+}
-+
-+static irqreturn_t sl2312_pci_irq(int irq, void *devid)
-+{
-+    struct irq_desc *desc;
-+	struct irqaction *action;
-+	int retval = 0;
-+
-+    return 1;
-+
-+	irq = sl2312_pci_get_int_src();
-+	desc = &irq_desc[irq];
-+	action = desc->action;
-+	do {
-+		retval |= action->handler(irq, devid);
-+		action = action->next;
-+	} while (action);
-+
-+    return 1;
-+}
-+
-+//extern int (*external_fault)(unsigned long addr, struct pt_regs *regs);
-+
-+void __init sl2312_pci_preinit(void)
-+{
-+    struct pci_bus bus;
-+	unsigned long flags;
-+	unsigned int temp;
-+	int ret;
-+
-+	/*
-+	 * Hook in our fault handler for PCI errors
-+	 */
-+//	external_fault = sl2312_pci_fault;
-+
-+	spin_lock_irqsave(&sl2312_pci_lock, flags);
-+
-+	/*
-+	 * Grab the PCI interrupt.
-+	 */
-+	ret = request_irq(IRQ_PCI, sl2312_pci_irq, 0, "sl2312 pci int", NULL);
-+	if (ret)
-+		printk(KERN_ERR "PCI: unable to grab PCI error "
-+		       "interrupt: %d\n", ret);
-+
-+	spin_unlock_irqrestore(&sl2312_pci_lock, flags);
-+
-+	// setup pci bridge
-+    bus.number = 0;   /* device 0, function 0 */
-+	temp = (SL2312_PCI_DMA_MEM1_BASE & 0xfff00000) | (SL2312_PCI_DMA_MEM1_SIZE << 16);
-+    sl2312_write_config(&bus, 0, SL2312_PCI_MEM1_BASE_SIZE, 4, temp);
-+}
-+
-+/*
-+ * 	No swizzle on SL2312
-+ */
-+static u8 __init sl2312_pci_swizzle(struct pci_dev *dev, u8 *pinp)
-+{
-+	return PCI_SLOT(dev->devfn);
-+}
-+
-+/*
-+ * map the specified device/slot/pin to an IRQ.  This works out such
-+ * that slot 9 pin 1 is INT0, pin 2 is INT1, and slot 10 pin 1 is INT1.
-+ */
-+static int __init sl2312_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
-+{
-+	int intnr = ((slot  + (pin - 1)) & 3) + 4;  /* the IRQ number of PCI bridge */
-+
-+	// printk("%s : slot = %d  pin = %d \n",__func__,slot,pin);
-+    switch (slot)
-+    {
-+        case 12:
-+        	if (pin==1)
-+        	{
-+		    	intnr = 3;
-+		    }
-+		    else
-+		    {
-+		    	intnr = 0;
-+		    }
-+            break;
-+        case 11:
-+		    intnr = (2 + (pin - 1)) & 3;
-+            break;
-+        case 10:
-+		    intnr = (1 + (pin - 1)) & 3;
-+            break;
-+        case  9:
-+		    intnr = (pin - 1) & 3;
-+            break;
-+    }
-+//	if (slot == 10)
-+//		intnr = (1 + (pin - 1)) & 3;
-+//	else if (slot == 9)
-+//		intnr = (pin - 1) & 3;
-+	return (IRQ_PCI_INTA + intnr);
-+}
-+
-+struct pci_bus * __init sl2312_pci_scan_bus(int nr, struct pci_sys_data *sysdata)
-+{
-+	return (pci_scan_bus(0, &sl2312_pci_ops, sysdata));
-+
-+}
-+
-+int __init sl2312_pci_setup(int nr, struct pci_sys_data *sys)
-+{
-+	int ret = 0;
-+
-+	if (nr == 0) {
-+		ret = sl2312_pci_setup_resources(sys->resource);
-+	}
-+
-+	return ret;
-+}
-+
-+
-+struct hw_pci sl2312_pci __initdata = {
-+	.setup          =	sl2312_pci_setup,
-+	.preinit		=	sl2312_pci_preinit,
-+	.nr_controllers =   1,
-+	.swizzle		=	sl2312_pci_swizzle,
-+	.map_irq		=	sl2312_pci_map_irq,
-+	.scan           =   sl2312_pci_scan_bus,
-+};
-+
-+static int __init sl2312_pci_init(void)
-+{
-+	if (machine_is_sl2312())
-+		pci_common_init(&sl2312_pci);
-+	return 0;
-+}
-+
-+subsys_initcall(sl2312_pci_init);
---- /dev/null
-+++ b/arch/arm/mach-sl2312/sl2312-otg-1.c
-@@ -0,0 +1,64 @@
-+/*
-+ *  linux/arch/arm/mach-pxa/sl2312.c
-+ *
-+ *  Author:	Nicolas Pitre
-+ *  Created:	Nov 05, 2002
-+ *  Copyright:	MontaVista Software Inc.
-+ *
-+ * Code specific to sl2312 aka Bulverde.
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ */
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include "asm/arch/sl2312.h"
-+#include "asm/arch/irqs.h"
-+#include 
-+#include 
-+#include 
-+
-+/*
-+ * device registration specific to sl2312.
-+ */
-+
-+static u64 sl2312_dmamask_1 = 0xffffffffUL;
-+
-+static struct resource sl2312_otg_resources_1[] = {
-+	[0] = {
-+		.start  = 0x69000000,
-+		.end    = 0x69000fff,
-+		.flags  = IORESOURCE_MEM,
-+	},
-+	[1] = {
-+		.start  = IRQ_USB1,
-+		.end    = IRQ_USB1,
-+		.flags  = IORESOURCE_IRQ,
-+	},
-+};
-+
-+static struct platform_device ehci_1_device = {
-+	.name		= "ehci-hcd-FOTG2XX",
-+	.id		= -1,
-+	.dev		= {
-+		.dma_mask = &sl2312_dmamask_1,
-+		.coherent_dma_mask = 0xffffffff,
-+	},
-+	.num_resources  = ARRAY_SIZE(sl2312_otg_resources_1),
-+	.resource       = sl2312_otg_resources_1,
-+};
-+
-+static struct platform_device *devices[] __initdata = {
-+	&ehci_1_device,
-+};
-+
-+static int __init sl2312_1_init(void)
-+{
-+	return platform_add_devices(devices, ARRAY_SIZE(devices));
-+}
-+
-+subsys_initcall(sl2312_1_init);
---- /dev/null
-+++ b/arch/arm/mach-sl2312/sl2312-otg.c
-@@ -0,0 +1,87 @@
-+/*
-+ *  linux/arch/arm/mach-pxa/sl2312.c
-+ *
-+ *  Author:	Nicolas Pitre
-+ *  Created:	Nov 05, 2002
-+ *  Copyright:	MontaVista Software Inc.
-+ *
-+ * Code specific to sl2312 aka Bulverde.
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ */
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include "asm/arch/sl2312.h"
-+#include "asm/arch/irqs.h"
-+#include 
-+#include 
-+#include 
-+
-+/*
-+ * device registration specific to sl2312.
-+ */
-+
-+static u64 sl2312_dmamask = 0xffffffffUL;
-+
-+static struct resource sl2312_otg_resources_1[] = {
-+	[0] = {
-+		.start  = 0x68000000,
-+		.end    = 0x68000fff,
-+		.flags  = IORESOURCE_MEM,
-+	},
-+	[1] = {
-+		.start  = IRQ_USB0,
-+		.end    = IRQ_USB0,
-+		.flags  = IORESOURCE_IRQ,
-+	},
-+};
-+static struct resource sl2312_otg_resources_2[] = {
-+	[2] = {
-+		.start  = 0x69000000,
-+		.end    = 0x69000fff,
-+		.flags  = IORESOURCE_MEM,
-+	},
-+	[3] = {
-+		.start  = IRQ_USB1,
-+		.end    = IRQ_USB1,
-+		.flags  = IORESOURCE_IRQ,
-+	},
-+};
-+
-+static struct platform_device ehci_device_1 = {
-+	.name		= "ehci-hcd-FOTG2XX",
-+	.id		= 1,
-+	.dev		= {
-+		.dma_mask = &sl2312_dmamask,
-+		.coherent_dma_mask = 0xffffffff,
-+	},
-+	.num_resources  = ARRAY_SIZE(sl2312_otg_resources_1),
-+	.resource       = sl2312_otg_resources_1,
-+};
-+
-+static struct platform_device ehci_device_2 = {
-+	.name		= "ehci-hcd-FOTG2XX",
-+	.id		= 2,
-+	.dev		= {
-+		.dma_mask = &sl2312_dmamask,
-+		.coherent_dma_mask = 0xffffffff,
-+	},
-+	.num_resources  = ARRAY_SIZE(sl2312_otg_resources_2),
-+	.resource       = sl2312_otg_resources_2,
-+};
-+
-+static struct platform_device *devices[] __initdata = {
-+	&ehci_device_1, /* &ehci_device_2, */
-+};
-+
-+static int __init sl2312_init(void)
-+{
-+	return platform_add_devices(devices, ARRAY_SIZE(devices));
-+}
-+
-+subsys_initcall(sl2312_init);
---- /dev/null
-+++ b/arch/arm/mach-sl2312/sl3516_device.c
-@@ -0,0 +1,89 @@
-+/*
-+ *  linux/arch/arm/mach-2312/sl3516_device.c
-+ *
-+ *  Author:	Nicolas Pitre
-+ *  Created:	Nov 05, 2002
-+ *  Copyright:	MontaVista Software Inc.
-+ *
-+ * Code specific to sl2312 aka Bulverde.
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ */
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include "asm/arch/sl2312.h"
-+#include "asm/arch/irqs.h"
-+#include 
-+#include 
-+
-+/*
-+ * device registration specific to sl2312.
-+ */
-+
-+static u64 sl3516_dmamask = 0xffffffffUL;
-+
-+static struct resource sl3516_sata_resources[] = {
-+	[0] = {
-+		.start  = 0x63400000,
-+		.end    = 0x63400040,
-+		.flags  = IORESOURCE_MEM,
-+	},
-+	[1] = {
-+		.start  = IRQ_IDE1,
-+		.end    = IRQ_IDE1,
-+		.flags  = IORESOURCE_IRQ,
-+	},
-+};
-+
-+static struct platform_device sata_device = {
-+	.name		= "lepus-sata",
-+	.id		= -1,
-+	.dev		= {
-+		.dma_mask = &sl3516_dmamask,
-+		.coherent_dma_mask = 0xffffffff,
-+	},
-+	.num_resources  = ARRAY_SIZE(sl3516_sata_resources),
-+	.resource       = sl3516_sata_resources,
-+};
-+
-+static struct resource sl3516_sata0_resources[] = {
-+	[0] = {
-+		.start  = 0x63000000,
-+		.end    = 0x63000040,
-+		.flags  = IORESOURCE_MEM,
-+	},
-+	[1] = {
-+		.start  = IRQ_IDE0,
-+		.end    = IRQ_IDE0,
-+		.flags  = IORESOURCE_IRQ,
-+	},
-+};
-+
-+static struct platform_device sata0_device = {
-+	.name		= "lepus-sata0",
-+	.id		= -1,
-+	.dev		= {
-+		.dma_mask = &sl3516_dmamask,
-+		.coherent_dma_mask = 0xffffffff,
-+	},
-+	.num_resources  = ARRAY_SIZE(sl3516_sata0_resources),
-+	.resource       = sl3516_sata0_resources,
-+};
-+
-+static struct platform_device *sata_devices[] __initdata = {
-+	&sata_device,
-+	&sata0_device,
-+};
-+
-+static int __init sl3516_init(void)
-+{
-+	return platform_add_devices(sata_devices, ARRAY_SIZE(sata_devices));
-+}
-+
-+subsys_initcall(sl3516_init);
---- /dev/null
-+++ b/arch/arm/mach-sl2312/time.c
-@@ -0,0 +1,134 @@
-+/*
-+ *  linux/include/asm-arm/arch-epxa10db/time.h
-+ *
-+ *  Copyright (C) 2001 Altera Corporation
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
-+ */
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#define TIMER_TYPE (volatile unsigned int*)
-+#include 
-+// #define FIQ_PLUS     1
-+
-+
-+/*
-+ * IRQ handler for the timer
-+ */
-+static irqreturn_t sl2312_timer_interrupt(int irq, void *dev_id)
-+{
-+//        unsigned int led;
-+	// ...clear the interrupt
-+#ifdef FIQ_PLUS
-+	*((volatile unsigned int *)FIQ_CLEAR(IO_ADDRESS(SL2312_INTERRUPT_BASE))) |= (unsigned int)(IRQ_TIMER1_MASK);
-+#else
-+	*((volatile unsigned int *)IRQ_CLEAR(IO_ADDRESS(SL2312_INTERRUPT_BASE))) |= (unsigned int)(IRQ_TIMER2_MASK);
-+#endif
-+
-+#if 0
-+        if(!(jiffies % HZ))
-+        {
-+            led = jiffies / HZ;
-+//            printk("ticks %x \n", led);
-+	    }
-+	do_leds();
-+	do_timer(regs);
-+	do_profile(regs);
-+#endif
-+    timer_tick();
-+    return IRQ_HANDLED;
-+}
-+
-+static struct irqaction sl2312_timer_irq = {
-+	.name		= "SL2312 Timer Tick",
-+	.flags		= IRQF_DISABLED | IRQF_TIMER,
-+	.handler	= sl2312_timer_interrupt,
-+};
-+
-+unsigned long sl2312_gettimeoffset (void)
-+{
-+    return 0L;
-+}
-+
-+/*
-+ * Set up timer interrupt, and return the current time in seconds.
-+ */
-+void __init sl2312_time_init(void)
-+{
-+	// For clock rate adjusting
-+	unsigned int tick_rate=0;
-+
-+#ifdef CONFIG_SL3516_ASIC
-+	unsigned int clock_rate_base = 130000000;
-+	unsigned int reg_v=0;
-+
-+	//--> Add by jason for clock adjust
-+	reg_v = readl(IO_ADDRESS((SL2312_GLOBAL_BASE+GLOBAL_STATUS)));
-+	reg_v >>= 15;
-+	tick_rate = (clock_rate_base + (reg_v & 0x07)*10000000);
-+
-+	//  FPGA use AHB bus tick rate
-+	printk("Bus: %dMHz",tick_rate/1000000);
-+
-+	tick_rate /= 6;				// APB bus run AHB*(1/6)
-+
-+	switch((reg_v>>3)&3){
-+		case 0:	printk("(1/1)\n") ;
-+					break;
-+		case 1:	printk("(3/2)\n") ;
-+					break;
-+		case 2:	printk("(24/13)\n") ;
-+					break;
-+		case 3:	printk("(2/1)\n") ;
-+					break;
-+	}
-+	//<--
-+#else
-+	printk("Bus: %dMHz(1/1)\n",CLOCK_TICK_RATE/1000000);		// FPGA use 20MHz
-+	tick_rate = CLOCK_TICK_RATE;
-+#endif
-+
-+
-+	/*
-+	 * Make irqs happen for the system timer
-+	 */
-+	// initialize timer interrupt
-+	// low active and edge trigger
-+#ifdef FIQ_PLUS
-+	*((volatile unsigned int *)FIQ_TMODE(IO_ADDRESS(SL2312_INTERRUPT_BASE))) |= (unsigned int)(IRQ_TIMER1_MASK);
-+	*((volatile unsigned int *)FIQ_LEVEL(IO_ADDRESS(SL2312_INTERRUPT_BASE))) |= (unsigned int)(IRQ_TIMER1_MASK);
-+	setup_irq(IRQ_TIMER1, &sl2312_timer_irq);
-+	/* Start the timer */
-+	*TIMER_COUNT(IO_ADDRESS(SL2312_TIMER1_BASE))=(unsigned int)(tick_rate/HZ);
-+	*TIMER_LOAD(IO_ADDRESS(SL2312_TIMER1_BASE))=(unsigned int)(tick_rate/HZ);
-+	*TIMER_CR(IO_ADDRESS(SL2312_TIMER1_BASE))=(unsigned int)(TIMER_1_CR_ENABLE_MSK|TIMER_1_CR_INT_MSK);
-+#else
-+	*((volatile unsigned int *)IRQ_TMODE(IO_ADDRESS(SL2312_INTERRUPT_BASE))) |= (unsigned int)(IRQ_TIMER2_MASK);
-+	*((volatile unsigned int *)IRQ_TLEVEL(IO_ADDRESS(SL2312_INTERRUPT_BASE))) |= (unsigned int)(IRQ_TIMER2_MASK);
-+	setup_irq(IRQ_TIMER2, &sl2312_timer_irq);
-+	/* Start the timer */
-+	*TIMER_COUNT(IO_ADDRESS(SL2312_TIMER2_BASE))=(unsigned int)(tick_rate/HZ);
-+	*TIMER_LOAD(IO_ADDRESS(SL2312_TIMER2_BASE))=(unsigned int)(tick_rate/HZ);
-+	*TIMER_CR(IO_ADDRESS(SL2312_TIMER1_BASE))=(unsigned int)(TIMER_2_CR_ENABLE_MSK|TIMER_2_CR_INT_MSK);
-+#endif
-+
-+}
-+
-+
---- /dev/null
-+++ b/arch/arm/mach-sl2312/xor.c
-@@ -0,0 +1,1200 @@
-+/*
-+ * arch/arm/mach-sl2312/xor.c
-+ *
-+ * Support functions for the Gemini Soc. This is
-+ * a HW XOR unit that is specifically designed for use with RAID5
-+ * applications.  This driver provides an interface that is used by
-+ * the Linux RAID stack.
-+ *
-+ * Original Author: Jason Lee
-+ *
-+ * Contributors:Sanders
-+ 				Jason Lee
-+ *
-+ *
-+ * Maintainer: Jason Lee
-+ *
-+ * Copyright (C) 2005 Storlink Corporation
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ *
-+ *
-+ * History:	(06/25/2005, DJ) Initial Creation
-+ *
-+ *	Versing 1.0.0	Initial version
-+ */
-+
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+
-+/*
-+ * pick up local definitions
-+ */
-+#define XOR_SW_FILL_IN
-+#include "hw_xor.h"
-+
-+
-+//#define XOR_DEBUG
-+//#define XOR_TEST	1
-+#ifdef XOR_TEST
-+#define TEST_ITERATION 1000
-+#define SPIN_WAIT	1
-+#endif
-+#ifdef XOR_DEBUG
-+#define DPRINTK(s, args...) printk("Gemini XOR: " s "\n", ## args)
-+#define DENTER() DPRINTK("Entered...\n");
-+#define DEXIT() DPRINTK("Exited...\n");
-+#else
-+#define DPRINTK(s, args...)
-+#define DENTER()
-+#define DEXIT()
-+#endif
-+
-+//#define SPIN_WAIT
-+
-+/* globals */
-+static RAID_T tp;
-+static RAID_TXDMA_CTRL_T 	txdma_ctrl;
-+RAID_RXDMA_CTRL_T			rxdma_ctrl;
-+
-+//#ifndef SPIN_WAIT
-+static spinlock_t	    raid_lock;
-+//#endif
-+
-+static unsigned int     tx_desc_virtual_base;
-+static unsigned int     rx_desc_virtual_base;
-+RAID_DESCRIPTOR_T	*tx_desc_ptr;
-+RAID_DESCRIPTOR_T	*rx_desc_ptr;
-+
-+/* static prototypes */
-+#define DMA_MALLOC(size,handle)		pci_alloc_consistent(NULL,size,handle)
-+#define DMA_MFREE(mem,size,handle)	pci_free_consistent(NULL,size,mem,handle)
-+
-+static int gemini_xor_init_desc(void);
-+
-+static unsigned int raid_read_reg(unsigned int offset)
-+{
-+    unsigned int    reg_val;
-+
-+    reg_val = readl(RAID_BASE_ADDR + offset);
-+	return (reg_val);
-+}
-+
-+static void raid_write_reg(unsigned int offset,unsigned int data,unsigned int bit_mask)
-+{
-+	unsigned int reg_val;
-+    unsigned int *addr;
-+
-+	reg_val = ( raid_read_reg(offset) & (~bit_mask) ) | (data & bit_mask);
-+	addr = (unsigned int *)(RAID_BASE_ADDR + offset);
-+    writel(reg_val,addr);
-+	return;
-+}
-+
-+#ifndef SPIN_WAIT
-+__inline__ void xor_queue_descriptor(void)
-+{
-+	unsigned int flags,status=1;
-+
-+	DPRINTK("Going to sleep");
-+
-+	while(status){
-+		yield();
-+		//schedule();
-+		spin_lock_irqsave(&raid_lock,flags);
-+		status = tp.busy;
-+		spin_unlock_irqrestore(&raid_lock, flags);
-+	}
-+//	tp.status = COMPLETE;
-+	DPRINTK("woken up!");
-+
-+}
-+#endif
-+
-+#ifdef SPIN_WAIT
-+static void gemini_xor_isr(int d_n)
-+#else
-+#if LINUX_VERSION_CODE <= KERNEL_VERSION(2,4,28)
-+static void gemini_xor_isr(int irq, void *dev_id, struct pt_regs *regs)
-+#elif LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
-+static irqreturn_t gemini_xor_isr(int irq, void *dev_instance, struct pt_regs *regs)
-+#endif
-+#endif
-+{
-+
-+	unsigned int err;
-+	RAID_DMA_STATUS_T 	dma_status;
-+//	RAID_DESCRIPTOR_T *rdesc,*tdesc;
-+//	unsigned int *paddr;
-+
-+	dma_status.bits32 = raid_read_reg(RAID_DMA_STATUS);
-+#ifdef SPIN_WAIT
-+	while( (dma_status.bits32& (1<<31) ) ==0 ){
-+		udelay(1);
-+		dma_status.bits32 = raid_read_reg(RAID_DMA_STATUS);
-+	}
-+
-+/*	tdesc = tp.tx_first_desc;
-+	rdesc = tp.rx_first_desc;
-+	for(d_n;d_n>0;d_n--){
-+		if( tdesc->func_ctrl.bits.own == DMA ){
-+			paddr = tdesc;
-+			printk("error tx desc:0x%x\n",*paddr++);
-+			printk("error tx desc:0x%x\n",*paddr++);
-+			printk("error tx desc:0s%x\n",*paddr++);
-+			printk("error tx desc:0x%x\n",*paddr);
-+			while(1);
-+		}
-+		tdesc = (RAID_DESCRIPTOR_T *)((tdesc->next_desc_addr.bits32 & 0xfffffff0)+tx_desc_virtual_base);
-+	}
-+
-+	if( rdesc->func_ctrl.bits.own == DMA ){
-+		paddr = rdesc;
-+		printk("error rx desc:0x%x\n",*paddr++);
-+		printk("error rx desc:0x%x\n",*paddr++);
-+		printk("error rx desc:0s%x\n",*paddr++);
-+		printk("error rx desc:0x%x\n",*paddr);
-+		while(1);
-+	}
-+*/
-+#endif
-+
-+	if(dma_status.bits32 & ((1<<31)|(1<<26))){
-+		// if no bug , we can turn off rx finish interrupt
-+		dma_status.bits32 = raid_read_reg(RAID_DMA_STATUS);
-+		err = raid_read_reg(RAID_DMA_DEVICE_ID);
-+		tp.busy = 0;
-+
-+		if(err&0x00FF0000){
-+			tp.status = ERROR;
-+			printk("XOR:%s error code %x\n",(err&0x00F00000)?"tx":"rx",err);
-+
-+#if LINUX_VERSION_CODE <= KERNEL_VERSION(2,4,28)
-+			return ;
-+#elif LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
-+#ifndef SPIN_WAIT
-+			return IRQ_RETVAL(IRQ_HANDLED);
-+#endif
-+#endif
-+		}
-+		// 16~19 rx error code
-+		// 20~23 tx error codd
-+
-+		dma_status.bits.tsFinishI = 1;
-+		dma_status.bits.rsFinishI = 1;
-+		raid_write_reg(RAID_DMA_STATUS, dma_status.bits32,0x84000000);	// clear INT
-+
-+//		printk("xor %d\n",d_n);
-+#if LINUX_VERSION_CODE <= KERNEL_VERSION(2,4,28)
-+			return ;
-+#elif LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
-+#ifndef SPIN_WAIT
-+			return IRQ_RETVAL(IRQ_HANDLED);
-+#endif
-+#endif
-+	}
-+
-+	#if LINUX_VERSION_CODE <= KERNEL_VERSION(2,4,28)
-+		return ;
-+	#elif LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
-+	#ifndef SPIN_WAIT
-+		printk("XOR: DMA status register(0x%8x)\n",dma_status.bits32);
-+		return IRQ_RETVAL(IRQ_HANDLED);
-+	#endif
-+	#endif
-+}
-+
-+void
-+xor_gemini_2(unsigned long bytes, unsigned long *p1, unsigned long *p2)
-+{
-+	int status=0;
-+	unsigned int flags;
-+
-+	if(bytes > (1<<(SRAM_PAR_SIZE+11))){
-+		printk("XOR: out of SRAM partition!![0x%x]\n",(unsigned int)bytes);
-+	}
-+
-+	spin_lock_irqsave(&raid_lock,flags);
-+	while(tp.status != COMPLETE){
-+		spin_unlock_irqrestore(&raid_lock, flags);
-+		//printk("XOR yield2\n");
-+#ifdef XOR_SW_FILL_IN
-+		xor_arm4regs_2(bytes,p1,p2);
-+		return ;
-+#else
-+		yield();
-+#endif
-+	}
-+	spin_unlock_irqrestore(&raid_lock, flags);
-+	tp.status = RUNNING;
-+
-+	// flush the cache to memory before H/W XOR touches them
-+	consistent_sync(p1, bytes, DMA_BIDIRECTIONAL);
-+	consistent_sync(p2, bytes, DMA_TO_DEVICE);
-+
-+
-+	tp.tx_desc = tp.tx_first_desc;
-+	tp.rx_desc = tp.rx_first_desc;
-+	if((tp.tx_desc->func_ctrl.bits.own == CPU)/*&&(tp.rx_desc->func_ctrl.bits.own == DMA)*/){
-+		// prepare tx descript
-+		raid_write_reg(RAID_FCHDMA_CURR_DESC,(unsigned int)tp.tx_desc-tx_desc_virtual_base,0xffffffff);
-+		tp.tx_desc->buf_addr = (unsigned int)__pa(p1);		// physical address
-+    	tp.tx_desc->func_ctrl.bits.buffer_size = bytes;    		/* total frame byte count */
-+//    	tp.tx_desc->flg_status.bits_cmd_status.bcc = 2;			// first descript
-+//    	tp.tx_desc->flg_status.bits_cmd_status.mode = 0;		// only support XOR command
-+		tp.tx_desc->flg_status.bits32 = 0x00020000;
-+    	tp.tx_desc->next_desc_addr.bits.sof_eof = 0x03;          /*only one descriptor*/
-+    	tp.tx_desc->func_ctrl.bits.own = DMA;	        		/* set owner bit */
-+    	tp.tx_cur_desc = (RAID_DESCRIPTOR_T *)((tp.tx_desc->next_desc_addr.bits32 & 0xfffffff0)+tx_desc_virtual_base);
-+		wmb();
-+    	tp.tx_desc = tp.tx_cur_desc;
-+    	tp.tx_desc->buf_addr = (unsigned int)__pa(p2);		// pysical address
-+    	tp.tx_desc->func_ctrl.bits.buffer_size = bytes;    		/* total frame byte count */
-+//    	tp.tx_desc->flg_status.bits_cmd_status.bcc = 1;			// last descript
-+//    	tp.tx_desc->flg_status.bits_cmd_status.mode = 0;		// only support XOR command
-+		tp.tx_desc->flg_status.bits32 = 0x00010000;
-+    	tp.tx_desc->func_ctrl.bits.own = DMA;	        		/* set owner bit */
-+    	tp.tx_desc->next_desc_addr.bits32 = 0x0000000b;// end of descript
-+    	tp.tx_cur_desc = (RAID_DESCRIPTOR_T *)((tp.tx_desc->next_desc_addr.bits32 & 0xfffffff0)+tx_desc_virtual_base);							// keep last descript
-+
-+    	wmb();
-+    	// prepare rx descript
-+    	raid_write_reg(RAID_STRDMA_CURR_DESC,(unsigned int)tp.rx_desc-rx_desc_virtual_base,0xFFFFFFFf);
-+    	tp.rx_desc->buf_addr = (unsigned int)__pa(p1);
-+    	tp.rx_desc->func_ctrl.bits.buffer_size = bytes;    		/* total frame byte count */
-+    	tp.rx_desc->flg_status.bits32 = 0;				// link data from XOR
-+//    	tp.rx_cur_desc->next_desc_addr.bits.sof_eof = 0x03;          /*only one descriptor*/
-+    	tp.rx_desc->func_ctrl.bits.own = DMA;	        		/* set owner bit */
-+    	tp.rx_desc->next_desc_addr.bits32 = 0x0000000b;// end of descript
-+
-+	}
-+	else{
-+	 	/* no free tx descriptor */
-+	 	printk("XOR:no free tx descript");
-+		return ;
-+	}
-+
-+	// change status
-+//	tp.status = RUNNING;
-+	status = tp.busy = 1;
-+
-+	// start tx DMA
-+	rxdma_ctrl.bits.rd_start = 1;
-+	// start rx DMA
-+	txdma_ctrl.bits.td_start = 1;
-+
-+	raid_write_reg(RAID_FCHDMA_CTRL, txdma_ctrl.bits32,0x80000000);
-+	raid_write_reg(RAID_STRDMA_CTRL, rxdma_ctrl.bits32,0x80000000);
-+
-+#ifdef SPIN_WAIT
-+	gemini_xor_isr(2);
-+#else
-+	xor_queue_descriptor();
-+#endif
-+
-+	tp.tx_desc->next_desc_addr.bits32 = ((unsigned long)tp.tx_first_desc - tx_desc_virtual_base + sizeof(RAID_DESCRIPTOR_T)*2) ;
-+	tp.status = COMPLETE;
-+//	tp.rx_desc->next_desc_addr.bits32 = ((unsigned long)tp.rx_first_desc - tx_desc_virtual_base + sizeof(RAID_DESCRIPTOR_T)*1) ;
-+//	tp.rx_desc = tp.rx_first_desc ;
-+//	tp.rx_desc->func_ctrl.bits.own = DMA;
-+
-+}
-+
-+void
-+xor_gemini_3(unsigned long bytes, unsigned long *p1, unsigned long *p2,
-+		unsigned long *p3)
-+{
-+	int status=0;
-+	unsigned int flags;
-+
-+	if(bytes > (1<<(SRAM_PAR_SIZE+11))){
-+		printk("XOR: out of SRAM partition!![0x%x]\n",(unsigned int)bytes);
-+	}
-+
-+	spin_lock_irqsave(&raid_lock,flags);
-+	if(tp.status != COMPLETE){
-+		spin_unlock_irqrestore(&raid_lock, flags);
-+		//printk("XOR yield3\n");
-+#ifdef XOR_SW_FILL_IN
-+		xor_arm4regs_3(bytes,p1,p2,p3);
-+		return;
-+#else
-+		yield();
-+#endif
-+	}
-+	spin_unlock_irqrestore(&raid_lock, flags);
-+	tp.status = RUNNING;
-+
-+	// flush the cache to memory before H/W XOR touches them
-+	consistent_sync(p1, bytes, DMA_BIDIRECTIONAL);
-+	consistent_sync(p2, bytes, DMA_TO_DEVICE);
-+	consistent_sync(p3, bytes, DMA_TO_DEVICE);
-+
-+	tp.tx_desc = tp.tx_first_desc;
-+	tp.rx_desc = tp.rx_first_desc;
-+	if((tp.tx_desc->func_ctrl.bits.own == CPU)/*&&(tp.rx_desc->func_ctrl.bits.own == DMA)*/){
-+		// prepare tx descript
-+		raid_write_reg(RAID_FCHDMA_CURR_DESC,(unsigned int)tp.tx_desc-tx_desc_virtual_base,0xffffffff);
-+		tp.tx_desc->buf_addr = (unsigned int)__pa(p1);		// physical address
-+    	tp.tx_desc->func_ctrl.bits.buffer_size = bytes;    		/* total frame byte count */
-+//    	tp.tx_desc->flg_status.bits_cmd_status.bcc = 2;			// first descript
-+//    	tp.tx_desc->flg_status.bits_cmd_status.mode = 0;		// only support XOR command
-+		tp.tx_desc->flg_status.bits32 = 0x00020000;
-+    	tp.tx_desc->next_desc_addr.bits.sof_eof = 0x03;          /*only one descriptor*/
-+    	tp.tx_desc->func_ctrl.bits.own = DMA;	        		/* set owner bit */
-+    	tp.tx_cur_desc = (RAID_DESCRIPTOR_T *)((tp.tx_desc->next_desc_addr.bits32 & 0xfffffff0)+tx_desc_virtual_base);
-+
-+    	tp.tx_desc = tp.tx_cur_desc;
-+    	tp.tx_desc->buf_addr = (unsigned int)__pa(p2);		// pysical address
-+    	tp.tx_desc->func_ctrl.bits.buffer_size = bytes;    		/* total frame byte count */
-+//    	tp.tx_desc->flg_status.bits_cmd_status.bcc = 0;			// first descript
-+//    	tp.tx_desc->flg_status.bits_cmd_status.mode = 0;		// only support XOR command
-+		tp.tx_desc->flg_status.bits32 = 0x0000000;
-+    	tp.tx_desc->next_desc_addr.bits.sof_eof = 0x03;          /*only one descriptor*/
-+    	tp.tx_desc->func_ctrl.bits.own = DMA;	        		/* set owner bit */
-+    	tp.tx_cur_desc = (RAID_DESCRIPTOR_T *)((tp.tx_desc->next_desc_addr.bits32 & 0xfffffff0)+tx_desc_virtual_base);
-+
-+    	tp.tx_desc = tp.tx_cur_desc;
-+    	tp.tx_desc->buf_addr = (unsigned int)__pa(p3);		// pysical address
-+    	tp.tx_desc->func_ctrl.bits.buffer_size = bytes;    		/* total frame byte count */
-+//    	tp.tx_desc->flg_status.bits_cmd_status.bcc = 1;			// last descript
-+//    	tp.tx_desc->flg_status.bits_cmd_status.mode = 0;		// only support XOR command
-+		tp.tx_desc->flg_status.bits32 = 0x00010000;
-+    	tp.tx_desc->func_ctrl.bits.own = DMA;	        		/* set owner bit */
-+    	tp.tx_desc->next_desc_addr.bits32 = 0x0000000b;// end of descript
-+    	tp.tx_cur_desc = (RAID_DESCRIPTOR_T *)((tp.tx_desc->next_desc_addr.bits32 & 0xfffffff0)+tx_desc_virtual_base);							// keep last descript
-+
-+    	// prepare rx descript
-+    	raid_write_reg(RAID_STRDMA_CURR_DESC,(unsigned int)tp.rx_desc-rx_desc_virtual_base,0xFFFFFFFf);
-+    	tp.rx_desc->buf_addr = (unsigned int)__pa(p1);
-+    	tp.rx_desc->func_ctrl.bits.buffer_size = bytes;    		/* total frame byte count */
-+    	tp.rx_desc->flg_status.bits32 = 0;				// link data from XOR
-+//    	tp.rx_cur_desc->next_desc_addr.bits.sof_eof = 0x03;          /*only one descriptor*/
-+    	tp.rx_desc->func_ctrl.bits.own = DMA;	        		/* set owner bit */
-+    	tp.rx_desc->next_desc_addr.bits32 = 0x0000000b;// end of descript
-+
-+	}
-+	else{
-+	 	/* no free tx descriptor */
-+	 	printk("XOR:no free tx descript \n");
-+		return ;
-+	}
-+
-+	// change status
-+//	tp.status = RUNNING;
-+	status = tp.busy = 1;
-+
-+	// start tx DMA
-+	rxdma_ctrl.bits.rd_start = 1;
-+	// start rx DMA
-+	txdma_ctrl.bits.td_start = 1;
-+	wmb();
-+	raid_write_reg(RAID_FCHDMA_CTRL, txdma_ctrl.bits32,0x80000000);
-+	raid_write_reg(RAID_STRDMA_CTRL, rxdma_ctrl.bits32,0x80000000);
-+
-+#ifdef SPIN_WAIT
-+	gemini_xor_isr(3);
-+#else
-+	xor_queue_descriptor();
-+#endif
-+	tp.tx_desc->next_desc_addr.bits32 = ((unsigned long)tp.tx_first_desc - tx_desc_virtual_base + sizeof(RAID_DESCRIPTOR_T)*3) | 0x0B;
-+	tp.status = COMPLETE;
-+//	tp.rx_desc->next_desc_addr.bits32 = ((unsigned long)tp.rx_first_desc - tx_desc_virtual_base + sizeof(RAID_DESCRIPTOR_T)*1) | 0x0B;
-+	//tp.rx_desc = tp.rx_first_desc ;
-+//	tp.rx_desc->func_ctrl.bits.own = DMA;
-+
-+}
-+
-+void
-+xor_gemini_4(unsigned long bytes, unsigned long *p1, unsigned long *p2,
-+		unsigned long *p3, unsigned long *p4)
-+{
-+	int status=0;
-+	unsigned int flags;
-+
-+	if(bytes > (1<<(SRAM_PAR_SIZE+11))){
-+		printk("XOR: out of SRAM partition!![0x%x]\n",(unsigned int)bytes);
-+	}
-+
-+	spin_lock_irqsave(&raid_lock,flags);
-+	if(tp.status != COMPLETE){
-+		spin_unlock_irqrestore(&raid_lock, flags);
-+		//printk("S\n");
-+#ifdef XOR_SW_FILL_IN
-+		xor_arm4regs_4(bytes,p1,p2,p3,p4);
-+		return;
-+#else
-+		msleep(1);
-+		yield();
-+#endif
-+	}
-+	spin_unlock_irqrestore(&raid_lock, flags);
-+
-+	tp.status = RUNNING;
-+
-+	// flush the cache to memory before H/W XOR touches them
-+	consistent_sync(p1, bytes, DMA_BIDIRECTIONAL);
-+	consistent_sync(p2, bytes, DMA_TO_DEVICE);
-+	consistent_sync(p3, bytes, DMA_TO_DEVICE);
-+	consistent_sync(p4, bytes, DMA_TO_DEVICE);
-+
-+	tp.tx_desc = tp.tx_first_desc;
-+	tp.rx_desc = tp.rx_first_desc;
-+	if((tp.tx_desc->func_ctrl.bits.own == CPU)/*&&(tp.rx_desc->func_ctrl.bits.own == DMA)*/){
-+		// prepare tx descript
-+		raid_write_reg(RAID_FCHDMA_CURR_DESC,(unsigned int)tp.tx_desc-tx_desc_virtual_base,0xffffffff);
-+		tp.tx_desc->buf_addr = (unsigned int)__pa(p1);		// physical address
-+    	tp.tx_desc->func_ctrl.bits.buffer_size = bytes;    		/* total frame byte count */
-+//    	tp.tx_desc->flg_status.bits_cmd_status.bcc = 2;			// first descript
-+//    	tp.tx_desc->flg_status.bits_cmd_status.mode = 0;		// only support XOR command
-+		tp.tx_desc->flg_status.bits32 = 0x00020000;
-+    	tp.tx_desc->next_desc_addr.bits.sof_eof = 0x03;          /*only one descriptor*/
-+    	tp.tx_desc->func_ctrl.bits.own = DMA;	        		/* set owner bit */
-+    	tp.tx_cur_desc = (RAID_DESCRIPTOR_T *)((tp.tx_desc->next_desc_addr.bits32 & 0xfffffff0)+tx_desc_virtual_base);
-+
-+    	tp.tx_desc = tp.tx_cur_desc;
-+    	tp.tx_cur_desc->buf_addr = (unsigned int)__pa(p2);		// pysical address
-+    	tp.tx_desc->func_ctrl.bits.buffer_size = bytes;    		/* total frame byte count */
-+//    	tp.tx_desc->flg_status.bits_cmd_status.bcc = 0;			// first descript
-+//    	tp.tx_desc->flg_status.bits_cmd_status.mode = 0;		// only support XOR command
-+		tp.tx_desc->flg_status.bits32 = 0x00000000;
-+    	tp.tx_cur_desc->next_desc_addr.bits.sof_eof = 0x03;          /*only one descriptor*/
-+    	tp.tx_desc->func_ctrl.bits.own = DMA;	        		/* set owner bit */
-+    	tp.tx_cur_desc = (RAID_DESCRIPTOR_T *)((tp.tx_desc->next_desc_addr.bits32 & 0xfffffff0)+tx_desc_virtual_base);
-+
-+    	tp.tx_desc = tp.tx_cur_desc;
-+    	tp.tx_desc->buf_addr = (unsigned int)__pa(p3);		// pysical address
-+    	tp.tx_desc->func_ctrl.bits.buffer_size = bytes;    		/* total frame byte count */
-+//    	tp.tx_desc->flg_status.bits_cmd_status.bcc = 0;			// first descript
-+//    	tp.tx_desc->flg_status.bits_cmd_status.mode = 0;		// only support XOR command
-+		tp.tx_desc->flg_status.bits32 = 0x00000000;
-+    	tp.tx_desc->next_desc_addr.bits.sof_eof = 0x03;          /*only one descriptor*/
-+    	tp.tx_desc->func_ctrl.bits.own = DMA;	        		/* set owner bit */
-+    	tp.tx_cur_desc = (RAID_DESCRIPTOR_T *)((tp.tx_desc->next_desc_addr.bits32 & 0xfffffff0)+tx_desc_virtual_base);
-+
-+
-+    	tp.tx_desc = tp.tx_cur_desc;
-+    	tp.tx_desc->buf_addr = (unsigned int)__pa(p4);		// pysical address
-+    	tp.tx_desc->func_ctrl.bits.buffer_size = bytes;    		/* total frame byte count */
-+//    	tp.tx_desc->flg_status.bits_cmd_status.bcc = 1;			// last descript
-+//    	tp.tx_desc->flg_status.bits_cmd_status.mode = 0;		// only support XOR command
-+		tp.tx_desc->flg_status.bits32 = 0x00010000;
-+//    	tp.tx_cur_desc->next_desc_addr.bits.sof_eof = 0x03;          /*only one descriptor*/
-+    	tp.tx_desc->func_ctrl.bits.own = DMA;	        		/* set owner bit */
-+    	tp.tx_desc->next_desc_addr.bits32 = 0x0000000b;// end of descript
-+    	tp.tx_cur_desc = (RAID_DESCRIPTOR_T *)((tp.tx_desc->next_desc_addr.bits32 & 0xfffffff0)+tx_desc_virtual_base);							// keep last descript
-+
-+    	// prepare rx descript
-+    	raid_write_reg(RAID_STRDMA_CURR_DESC,(unsigned int)tp.rx_desc-rx_desc_virtual_base,0xFFFFFFFF);
-+    	tp.rx_desc->buf_addr = (unsigned int)__pa(p1);
-+    	tp.rx_desc->func_ctrl.bits.buffer_size = bytes;    		/* total frame byte count */
-+    	tp.rx_desc->flg_status.bits32 = 0;				// link data from XOR
-+//    	tp.rx_cur_desc->next_desc_addr.bits.sof_eof = 0x03;          /*only one descriptor*/
-+    	tp.rx_desc->func_ctrl.bits.own = DMA;	        		/* set owner bit */
-+    	tp.rx_desc->next_desc_addr.bits32 = 0x0000000b;// end of descript
-+
-+	}
-+	else{
-+	 	/* no free tx descriptor */
-+	 	printk("XOR:no free tx descript");
-+		return ;
-+	}
-+
-+	// change status
-+//	tp.status = RUNNING;
-+	status = tp.busy = 1;
-+
-+	// start tx DMA
-+	rxdma_ctrl.bits.rd_start = 1;
-+	// start rx DMA
-+	txdma_ctrl.bits.td_start = 1;
-+	wmb();
-+	raid_write_reg(RAID_FCHDMA_CTRL, txdma_ctrl.bits32,0x80000000);
-+	raid_write_reg(RAID_STRDMA_CTRL, rxdma_ctrl.bits32,0x80000000);
-+
-+#ifdef SPIN_WAIT
-+	gemini_xor_isr(4);
-+#else
-+	xor_queue_descriptor();
-+#endif
-+
-+	tp.tx_desc->next_desc_addr.bits32 = ((unsigned long)tp.tx_first_desc - tx_desc_virtual_base + sizeof(RAID_DESCRIPTOR_T)*4) | 0x0B;
-+	tp.status = COMPLETE;
-+//	tp.rx_desc->next_desc_addr.bits32 = ((unsigned long)tp.rx_first_desc - tx_desc_virtual_base + sizeof(RAID_DESCRIPTOR_T)*1) | 0x0B;
-+	//tp.rx_desc = tp.rx_first_desc ;
-+//	tp.rx_desc->func_ctrl.bits.own = DMA;
-+
-+}
-+
-+void
-+xor_gemini_5(unsigned long bytes, unsigned long *p1, unsigned long *p2,
-+		unsigned long *p3, unsigned long *p4, unsigned long *p5)
-+{
-+
-+	int status=0;
-+	unsigned int flags;
-+
-+
-+	if(bytes > (1<<(SRAM_PAR_SIZE+11))){
-+		printk("XOR: out of SRAM partition!![0x%x]\n",(unsigned int)bytes);
-+	}
-+
-+	spin_lock_irqsave(&raid_lock,flags);
-+	while(tp.status != COMPLETE){
-+		spin_unlock_irqrestore(&raid_lock, flags);
-+		//printk("XOR yield5\n");
-+#ifdef XOR_SW_FILL_IN
-+		xor_arm4regs_5(bytes,p1,p2,p3,p4,p5);
-+		return;
-+#else
-+		msleep(1);
-+		yield();
-+#endif
-+	}
-+	spin_unlock_irqrestore(&raid_lock, flags);
-+	tp.status = RUNNING;
-+
-+	// flush the cache to memory before H/W XOR touches them
-+	consistent_sync(p1, bytes, DMA_BIDIRECTIONAL);
-+	consistent_sync(p2, bytes, DMA_TO_DEVICE);
-+	consistent_sync(p3, bytes, DMA_TO_DEVICE);
-+	consistent_sync(p4, bytes, DMA_TO_DEVICE);
-+	consistent_sync(p5, bytes, DMA_TO_DEVICE);
-+
-+	tp.tx_desc = tp.tx_first_desc;
-+	tp.rx_desc = tp.rx_first_desc;
-+	if((tp.tx_desc->func_ctrl.bits.own == CPU)/*&&(tp.rx_desc->func_ctrl.bits.own == DMA)*/){
-+		// prepare tx descript
-+		raid_write_reg(RAID_FCHDMA_CURR_DESC,(unsigned int)tp.tx_desc-tx_desc_virtual_base,0xffffffff);
-+		tp.tx_desc->buf_addr = (unsigned int)__pa(p1);		// physical address
-+    	tp.tx_desc->func_ctrl.bits.buffer_size = bytes;    		/* total frame byte count */
-+//    	tp.tx_desc->flg_status.bits_cmd_status.bcc = 2;			// first descript
-+//    	tp.tx_desc->flg_status.bits_cmd_status.mode = 0;		// only support XOR command
-+		tp.tx_desc->flg_status.bits32 = 0x00020000;
-+    	tp.tx_desc->next_desc_addr.bits.sof_eof = 0x03;          /*only one descriptor*/
-+    	wmb();
-+    	tp.tx_desc->func_ctrl.bits.own = DMA;	        		/* set owner bit */
-+    	tp.tx_cur_desc = (RAID_DESCRIPTOR_T *)((tp.tx_desc->next_desc_addr.bits32 & 0xfffffff0)+tx_desc_virtual_base);
-+
-+    	tp.tx_desc = tp.tx_cur_desc;
-+    	tp.tx_desc->buf_addr = (unsigned int)__pa(p2);		// pysical address
-+    	tp.tx_desc->func_ctrl.bits.buffer_size = bytes;    		/* total frame byte count */
-+//    	tp.tx_desc->flg_status.bits_cmd_status.bcc = 0;			// first descript
-+//    	tp.tx_desc->flg_status.bits_cmd_status.mode = 0;		// only support XOR command
-+		tp.tx_desc->flg_status.bits32 = 0x00000000;
-+    	tp.tx_desc->next_desc_addr.bits.sof_eof = 0x03;          /*only one descriptor*/
-+    	wmb();
-+    	tp.tx_desc->func_ctrl.bits.own = DMA;	        		/* set owner bit */
-+    	tp.tx_cur_desc = (RAID_DESCRIPTOR_T *)((tp.tx_desc->next_desc_addr.bits32 & 0xfffffff0)+tx_desc_virtual_base);
-+
-+    	tp.tx_desc = tp.tx_cur_desc;
-+    	tp.tx_desc->buf_addr = (unsigned int)__pa(p3);		// pysical address
-+    	tp.tx_desc->func_ctrl.bits.buffer_size = bytes;    		/* total frame byte count */
-+//    	tp.tx_desc->flg_status.bits_cmd_status.bcc = 0;			// first descript
-+//    	tp.tx_desc->flg_status.bits_cmd_status.mode = 0;		// only support XOR command
-+		tp.tx_desc->flg_status.bits32 = 0x00000000;
-+    	tp.tx_desc->next_desc_addr.bits.sof_eof = 0x03;          /*only one descriptor*/
-+    	wmb();
-+    	tp.tx_desc->func_ctrl.bits.own = DMA;	        		/* set owner bit */
-+    	tp.tx_cur_desc = (RAID_DESCRIPTOR_T *)((tp.tx_desc->next_desc_addr.bits32 & 0xfffffff0)+tx_desc_virtual_base);
-+
-+		tp.tx_desc = tp.tx_cur_desc;
-+    	tp.tx_desc->buf_addr = (unsigned int)__pa(p4);		// pysical address
-+    	tp.tx_desc->func_ctrl.bits.buffer_size = bytes;    		/* total frame byte count */
-+//    	tp.tx_desc->flg_status.bits_cmd_status.bcc = 0;			// first descript
-+//    	tp.tx_desc->flg_status.bits_cmd_status.mode = 0;		// only support XOR command
-+		tp.tx_desc->flg_status.bits32 = 0x00000000;
-+    	tp.tx_desc->next_desc_addr.bits.sof_eof = 0x03;          /*only one descriptor*/
-+    	wmb();
-+    	tp.tx_desc->func_ctrl.bits.own = DMA;	        		/* set owner bit */
-+    	tp.tx_cur_desc = (RAID_DESCRIPTOR_T *)((tp.tx_desc->next_desc_addr.bits32 & 0xfffffff0)+tx_desc_virtual_base);
-+
-+
-+    	tp.tx_desc = tp.tx_cur_desc;
-+    	tp.tx_desc->buf_addr = (unsigned int)__pa(p5);		// pysical address
-+    	tp.tx_desc->func_ctrl.bits.buffer_size = bytes;    		/* total frame byte count */
-+//    	tp.tx_desc->flg_status.bits_cmd_status.bcc = 1;			// last descript
-+//    	tp.tx_desc->flg_status.bits_cmd_status.mode = 0;		// only support XOR command
-+//    	tp.tx_cur_desc->next_desc_addr.bits.sof_eof = 0x03;          /*only one descriptor*/
-+		tp.tx_desc->flg_status.bits32 = 0x00010000;
-+    	tp.tx_desc->func_ctrl.bits.own = DMA;	        		/* set owner bit */
-+    	tp.tx_desc->next_desc_addr.bits32 = 0x0000000b;// end of descript
-+    	tp.tx_cur_desc = (RAID_DESCRIPTOR_T *)((tp.tx_desc->next_desc_addr.bits32 & 0xfffffff0)+tx_desc_virtual_base);
-+    	tp.tx_finished_desc = tp.tx_desc;								// keep last descript
-+
-+    	// prepare rx descript
-+    	raid_write_reg(RAID_STRDMA_CURR_DESC,(unsigned int)tp.rx_desc-rx_desc_virtual_base,0xFFFFFFFF);
-+    	tp.rx_desc->buf_addr = (unsigned int)__pa(p1);
-+    	tp.rx_desc->func_ctrl.bits.buffer_size = bytes;    		/* total frame byte count */
-+    	tp.rx_desc->flg_status.bits32 = 0;				// link data from XOR
-+//    	tp.rx_cur_desc->next_desc_addr.bits.sof_eof = 0x03;          /*only one descriptor*/
-+    	tp.rx_desc->func_ctrl.bits.own = DMA;	        		/* set owner bit */
-+    	tp.rx_desc->next_desc_addr.bits32 = 0x0000000b;// end of descript
-+
-+	}
-+	else{
-+	 	/* no free tx descriptor */
-+	 	printk("XOR:no free tx descript");
-+		return ;
-+	}
-+
-+	// change status
-+//	tp.status = RUNNING;
-+	status = tp.busy = 1;
-+
-+	// start tx DMA
-+	rxdma_ctrl.bits.rd_start = 1;
-+	// start rx DMA
-+	txdma_ctrl.bits.td_start = 1;
-+	wmb();
-+	raid_write_reg(RAID_FCHDMA_CTRL, txdma_ctrl.bits32,0x80000000);
-+	raid_write_reg(RAID_STRDMA_CTRL, rxdma_ctrl.bits32,0x80000000);
-+
-+#ifdef SPIN_WAIT
-+	gemini_xor_isr(5);
-+#else
-+	xor_queue_descriptor();
-+#endif
-+
-+	tp.tx_desc->next_desc_addr.bits32 = ((unsigned long)tp.tx_first_desc - tx_desc_virtual_base + sizeof(RAID_DESCRIPTOR_T)*5) | 0x0B;
-+	tp.status = COMPLETE;
-+//	tp.rx_desc->next_desc_addr.bits32 = ((unsigned long)tp.rx_first_desc - tx_desc_virtual_base + sizeof(RAID_DESCRIPTOR_T)*1) | 0x0B;
-+	//tp.rx_desc = tp.rx_first_desc ;
-+//	tp.rx_desc->func_ctrl.bits.own = DMA;
-+
-+}
-+
-+#ifdef XOR_TEST
-+void
-+raid_memset(unsigned int *p1, unsigned int pattern, unsigned int bytes)
-+{
-+	int status=0,i;
-+
-+	if(bytes > (1<<(SRAM_PAR_SIZE+11))){
-+		printk("XOR: out of SRAM partition!![0x%x]\n",(unsigned int)bytes);
-+	}
-+
-+	*p1 = pattern;
-+
-+	// flush the cache to memory before H/W XOR touches them
-+	consistent_sync(p1, bytes, DMA_BIDIRECTIONAL);
-+
-+	while(tp.status != COMPLETE){
-+		DPRINTK("XOR yield\n");
-+		//schedule();
-+		yield();
-+	}
-+	tp.status = RUNNING;
-+
-+	tp.tx_desc = tp.tx_first_desc;
-+	tp.rx_desc = tp.rx_first_desc;
-+	if((tp.tx_desc->func_ctrl.bits.own == CPU)/*&&(tp.rx_desc->func_ctrl.bits.own == DMA)*/){
-+		// prepare tx descript
-+		raid_write_reg(RAID_FCHDMA_CURR_DESC,(unsigned int)tp.tx_desc-tx_desc_virtual_base,0xFFFFFFFF);
-+		tp.tx_desc->buf_addr = (unsigned int)__pa(p1);		// physical address
-+    	tp.tx_desc->func_ctrl.bits.buffer_size = 4;    		/* total frame byte count */
-+    	tp.tx_desc->flg_status.bits_cmd_status.bcc = bytes;			// bytes to fill
-+    	tp.tx_desc->flg_status.bits_cmd_status.mode = CMD_FILL;		// only support memory FILL command
-+    	tp.tx_desc->next_desc_addr.bits.sof_eof = 0x03;          /*only one descriptor*/
-+    	tp.tx_desc->func_ctrl.bits.own = DMA;	        		/* set owner bit */
-+    	tp.tx_desc->next_desc_addr.bits32 = 0x0000000b;
-+//    	tp.tx_cur_desc = (RAID_DESCRIPTOR_T *)((tp.tx_desc->next_desc_addr.bits32 & 0xFFFFFFF0)+tx_desc_virtual_base);
-+
-+    	// prepare rx descript
-+    	raid_write_reg(RAID_STRDMA_CURR_DESC,(unsigned int)tp.rx_desc-rx_desc_virtual_base,0xFFFFFFFF);
-+    	tp.rx_desc->buf_addr = (unsigned int)__pa(p1);
-+    	tp.rx_desc->func_ctrl.bits.buffer_size = bytes;    		/* total frame byte count */
-+    	tp.rx_desc->flg_status.bits32 = 0;				// link data from XOR
-+    	tp.rx_cur_desc->next_desc_addr.bits.sof_eof = 0x03;          /*only one descriptor*/
-+    	tp.rx_desc->func_ctrl.bits.own = DMA;	        		/* set owner bit */
-+//    	tp.rx_cur_desc = (RAID_DESCRIPTOR_T *)((tp.rx_cur_desc->next_desc_addr.bits32 & 0xfffffff0)+rx_desc_virtual_base);
-+    	tp.rx_desc->next_desc_addr.bits32 = 0x0000000b;// end of descript
-+    	tp.rx_finished_desc = tp.rx_desc;
-+
-+	}
-+	else{
-+	 	/* no free tx descriptor */
-+	 	printk("XOR:no free tx descript");
-+		return ;
-+	}
-+
-+	// change status
-+	//tp.status = RUNNING;
-+	status = tp.busy = 1;
-+
-+	// start tx DMA
-+	rxdma_ctrl.bits.rd_start = 1;
-+	// start rx DMA
-+	txdma_ctrl.bits.td_start = 1;
-+
-+	raid_write_reg(RAID_FCHDMA_CTRL, txdma_ctrl.bits32,0x80000000);
-+	raid_write_reg(RAID_STRDMA_CTRL, rxdma_ctrl.bits32,0x80000000);
-+
-+#ifdef SPIN_WAIT
-+	gemini_xor_isr(2);
-+#else
-+	xor_queue_descriptor();
-+#endif
-+
-+	for(i=1; i<(bytes/sizeof(int)); i++) {
-+		if(p1[0]!=p1[i]){
-+			printk("pattern set error!\n");
-+			while(1);
-+		}
-+	}
-+
-+	tp.tx_desc->next_desc_addr.bits32 = ((unsigned long)tp.tx_first_desc - tx_desc_virtual_base + sizeof(RAID_DESCRIPTOR_T)*1) ;
-+	tp.status = COMPLETE;
-+//	tp.rx_desc->next_desc_addr.bits32 = ((unsigned long)tp.rx_first_desc - tx_desc_virtual_base + sizeof(RAID_DESCRIPTOR_T)*1) ;
-+	//tp.rx_desc = tp.rx_first_desc ;
-+//	tp.rx_desc->func_ctrl.bits.own = DMA;
-+
-+}
-+#endif
-+
-+void
-+raid_memcpy(unsigned int *to, unsigned int *from, unsigned int bytes)
-+{
-+	int status=0,i;
-+
-+	if(bytes > (1<<(SRAM_PAR_SIZE+11))){
-+		printk("XOR: out of SRAM partition!![0x%x]\n",(unsigned int)bytes);
-+	}
-+
-+	// flush the cache to memory before H/W XOR touches them
-+	consistent_sync(to, bytes, DMA_BIDIRECTIONAL);
-+	consistent_sync(from,bytes, DMA_TO_DEVICE);
-+
-+	while(tp.status != COMPLETE){
-+		DPRINTK("XOR yield\n");
-+		//schedule();
-+		yield();
-+	}
-+	tp.status = RUNNING;
-+
-+	tp.tx_desc = tp.tx_first_desc;
-+	tp.rx_desc = tp.rx_first_desc;
-+	if((tp.tx_desc->func_ctrl.bits.own == CPU)/*&&(tp.rx_desc->func_ctrl.bits.own == DMA)*/){
-+		// prepare tx descript
-+		raid_write_reg(RAID_FCHDMA_CURR_DESC,(unsigned int)tp.tx_desc-tx_desc_virtual_base,0xFFFFFFFF);
-+		tp.tx_desc->buf_addr = (unsigned int)__pa(from);		// physical address
-+    	tp.tx_desc->func_ctrl.bits.buffer_size = bytes;    		/* total frame byte count */
-+    	tp.tx_desc->flg_status.bits32 = CMD_CPY;		// only support memory FILL command
-+    	tp.tx_desc->next_desc_addr.bits.sof_eof = 0x03;          /*only one descriptor*/
-+    	tp.tx_desc->func_ctrl.bits.own = DMA;	        		/* set owner bit */
-+    	tp.tx_desc->next_desc_addr.bits32 = 0x0000000b;
-+//    	tp.tx_cur_desc = (RAID_DESCRIPTOR_T *)((tp.tx_desc->next_desc_addr.bits32 & 0xFFFFFFF0)+tx_desc_virtual_base);
-+
-+    	// prepare rx descript
-+    	raid_write_reg(RAID_STRDMA_CURR_DESC,(unsigned int)tp.rx_desc-rx_desc_virtual_base,0xFFFFFFFF);
-+    	tp.rx_desc->buf_addr = (unsigned int)__pa(to);
-+    	tp.rx_desc->func_ctrl.bits.buffer_size = bytes;    		/* total frame byte count */
-+    	tp.rx_desc->flg_status.bits32 = 0;				// link data from XOR
-+    	tp.rx_cur_desc->next_desc_addr.bits.sof_eof = 0x03;          /*only one descriptor*/
-+    	tp.rx_desc->func_ctrl.bits.own = DMA;	        		/* set owner bit */
-+//    	tp.rx_cur_desc = (RAID_DESCRIPTOR_T *)((tp.rx_cur_desc->next_desc_addr.bits32 & 0xfffffff0)+rx_desc_virtual_base);
-+    	tp.rx_desc->next_desc_addr.bits32 = 0x0000000b;// end of descript
-+
-+	}
-+	else{
-+	 	/* no free tx descriptor */
-+	 	printk("XOR:no free tx descript");
-+		return ;
-+	}
-+
-+	// change status
-+	//tp.status = RUNNING;
-+	status = tp.busy = 1;
-+
-+	// start tx DMA
-+	rxdma_ctrl.bits.rd_start = 1;
-+	// start rx DMA
-+	txdma_ctrl.bits.td_start = 1;
-+
-+	raid_write_reg(RAID_FCHDMA_CTRL, txdma_ctrl.bits32,0x80000000);
-+	raid_write_reg(RAID_STRDMA_CTRL, rxdma_ctrl.bits32,0x80000000);
-+
-+#ifdef SPIN_WAIT
-+	gemini_xor_isr(2);
-+#else
-+	xor_queue_descriptor();
-+#endif
-+
-+#ifdef XOR_TEST
-+	for(i=1; i<(bytes/sizeof(int)); i++) {
-+		if(to[i]!=from[i]){
-+			printk("pattern check error!\n");
-+			printk("offset=0x%x p1=%x p2=%x\n",i*4,to[i],from[i]);
-+			while(1);
-+		}
-+	}
-+#endif
-+
-+	tp.tx_desc->next_desc_addr.bits32 = ((unsigned long)tp.tx_first_desc - tx_desc_virtual_base + sizeof(RAID_DESCRIPTOR_T)*1) ;
-+	tp.status = COMPLETE;
-+//	tp.rx_desc->next_desc_addr.bits32 = ((unsigned long)tp.rx_first_desc - tx_desc_virtual_base + sizeof(RAID_DESCRIPTOR_T)*1) ;
-+	//tp.rx_desc = tp.rx_first_desc ;
-+//	tp.rx_desc->func_ctrl.bits.own = DMA;
-+
-+}
-+EXPORT_SYMBOL(raid_memcpy);
-+
-+#ifdef XOR_TEST
-+int
-+raid_memchk(unsigned int *p1, unsigned int pattern, unsigned int bytes)
-+{
-+	int status=0;
-+	RAID_DMA_STATUS_T 	dma_status;
-+
-+	if(bytes > (1<<(SRAM_PAR_SIZE+11))){
-+		printk("XOR: out of SRAM partition!![0x%x]\n",(unsigned int)bytes);
-+	}
-+
-+	status = ((pattern&0xFFFF)%bytes )/4;
-+	p1[status] = pattern;
-+
-+	while(tp.status != COMPLETE){
-+		DPRINTK("XOR yield\n");
-+		//schedule();
-+		yield();
-+	}
-+	tp.status = RUNNING;
-+
-+	// flush the cache to memory before H/W XOR touches them
-+	consistent_sync(p1, bytes, DMA_BIDIRECTIONAL);
-+
-+	tp.tx_desc = tp.tx_first_desc;
-+	if((tp.tx_desc->func_ctrl.bits.own == CPU)/*&&(tp.rx_desc->func_ctrl.bits.own == DMA)*/){
-+		// prepare tx descript
-+		raid_write_reg(RAID_FCHDMA_CURR_DESC,(unsigned int)tp.tx_desc-tx_desc_virtual_base,0xFFFFFFFF);
-+		tp.tx_desc->buf_addr = (unsigned int)__pa(p1);		// physical address
-+    	tp.tx_desc->func_ctrl.bits.raid_ctrl_status = 0;
-+    	tp.tx_desc->func_ctrl.bits.buffer_size = bytes ;    		/* total frame byte count */
-+    	tp.tx_desc->flg_status.bits32 = CMD_CHK;		// only support memory FILL command
-+    	tp.tx_desc->next_desc_addr.bits.sof_eof = 0x03;          /*only one descriptor*/
-+    	tp.tx_desc->func_ctrl.bits.own = DMA;	        		/* set owner bit */
-+    	tp.tx_desc->next_desc_addr.bits32 = 0x0000000b;
-+//    	tp.tx_cur_desc = (RAID_DESCRIPTOR_T *)((tp.tx_desc->next_desc_addr.bits32 & 0xFFFFFFF0)+tx_desc_virtual_base);
-+
-+	}
-+	else{
-+	 	/* no free tx descriptor */
-+	 	printk("XOR:no free tx descript");
-+		return -1;
-+	}
-+
-+	// change status
-+	//tp.status = RUNNING;
-+	status = tp.busy = 1;
-+
-+	// start tx DMA
-+	txdma_ctrl.bits.td_start = 1;
-+
-+	raid_write_reg(RAID_FCHDMA_CTRL, txdma_ctrl.bits32,0x80000000);
-+//	raid_write_reg(RAID_STRDMA_CTRL, rxdma_ctrl.bits32,0x80000000);
-+
-+#ifdef SPIN_WAIT
-+	gemini_xor_isr(2);
-+#else
-+	xor_queue_descriptor();
-+#endif
-+
-+//	dma_status.bits32 = raid_read_reg(RAID_DMA_STATUS);
-+//	if (dma_status.bits32 & (1<<15))	{
-+
-+	if((tp.tx_first_desc->func_ctrl.bits.raid_ctrl_status & 0x2)) {
-+		status = 1;
-+//		raid_write_reg(RAID_DMA_STATUS,0x00008000,0x00080000);
-+	}
-+	else{
-+		status = 0;
-+	}
-+
-+	tp.tx_desc->next_desc_addr.bits32 = ((unsigned long)tp.tx_first_desc - tx_desc_virtual_base + sizeof(RAID_DESCRIPTOR_T)*1) ;
-+	tp.status = COMPLETE;
-+//	tp.rx_desc->func_ctrl.bits.own = DMA;
-+	return status ;
-+}
-+#endif
-+
-+int __init gemini_xor_init(void)
-+{
-+	unsigned int res;
-+	unsigned int *paddr1,*paddr2,*paddr3,i;
-+	unsigned volatile char  *charact;
-+	unsigned volatile short *two_char;
-+	unsigned volatile int   *four_char;
-+
-+	// init descript
-+	res = gemini_xor_init_desc();
-+	if(res) {
-+		printk("Init RAID Descript Fail!!\n");
-+		return -res;
-+	}
-+
-+	tp.device_name = "Gemini XOR Acceleration";
-+
-+	// request irq
-+#ifndef SPIN_WAIT
-+	res = request_irq(IRQ_RAID, gemini_xor_isr, SA_INTERRUPT, tp.device_name, NULL);
-+#endif
-+	if(res){
-+		printk(KERN_ERR "%s: unable to request IRQ %d for "
-+		       "HW XOR %d\n", tp.device_name, IRQ_RAID, res);
-+		return -EBUSY;
-+	}
-+
-+#ifdef XOR_TEST
-+
-+RETEST:
-+	paddr1 = kmalloc(0x1000,GFP_KERNEL);
-+	paddr2 = kmalloc(0x1000,GFP_KERNEL);
-+	paddr3 = kmalloc(0x1000,GFP_KERNEL);
-+	for(i=0;ifunc_ctrl.bits.own = CPU;
-+		tp.tx_desc->func_ctrl.bits.buffer_size = 0;
-+		tp.tx_desc_dma = tp.tx_desc_dma + sizeof(RAID_DESCRIPTOR_T);
-+//		tp.tx_desc->next_desc_addr.bits32 = (unsigned int)tp.tx_desc_dma | 0x0B;
-+		tp.tx_desc->next_desc_addr.bits32 = ((unsigned int)tx_first_desc_dma | 0x0B) + i*0x10;
-+		tp.tx_desc = &tp.tx_desc[1];
-+	}
-+	tp.tx_desc->func_ctrl.bits.own = DMA;
-+	tp.tx_desc->next_desc_addr.bits32 = (unsigned int)tx_first_desc_dma|0x0b;
-+	tp.tx_desc = tp.tx_cur_desc;
-+	tp.tx_desc_dma = (unsigned int*)tx_first_desc_dma;
-+	tp.tx_first_desc = tp.tx_desc ;
-+
-+	tp.rx_cur_desc = tp.rx_desc;  /* virtual address */
-+	tp.rx_finished_desc = tp.rx_desc; /* virtual address */
-+	rx_first_desc_dma = (dma_addr_t)tp.rx_desc_dma; /* physical address */
-+	for (i = 1; i < RX_DESC_NUM; i++) {
-+		tp.rx_desc->func_ctrl.bits.own = DMA;
-+		tp.rx_desc->func_ctrl.bits.buffer_size = 0;
-+		tp.rx_desc_dma = tp.rx_desc_dma + sizeof(RAID_DESCRIPTOR_T);
-+//		tp.rx_desc->next_desc_addr.bits32 = (unsigned int)tp.rx_desc_dma | 0x0B;
-+		tp.rx_desc->next_desc_addr.bits32 = ((unsigned int)rx_first_desc_dma | 0x0B) + i*0x10;
-+		tp.rx_desc = &tp.rx_desc[1];
-+	}
-+	tp.rx_desc->func_ctrl.bits.own = DMA;
-+	tp.rx_desc->next_desc_addr.bits32 = rx_first_desc_dma|0x0b;
-+	tp.rx_desc = tp.rx_cur_desc;
-+	tp.rx_desc_dma = (unsigned int*)rx_first_desc_dma;
-+	tp.rx_first_desc = tp.rx_desc ;
-+	tp.busy = 0;
-+	tp.status = COMPLETE;
-+
-+	// Partition SRAM size
-+	raid_write_reg(RAID_PCR, SRAM_PAR_SIZE,0x00000003);
-+
-+	// config tx DMA controler
-+	txdma_ctrl.bits32 = 0;
-+	txdma_ctrl.bits.td_start = 0;
-+	txdma_ctrl.bits.td_continue = 1;
-+	txdma_ctrl.bits.td_chain_mode = 1;
-+	txdma_ctrl.bits.td_prot = 0;
-+	txdma_ctrl.bits.td_burst_size = 1;
-+	txdma_ctrl.bits.td_bus = 3;
-+	txdma_ctrl.bits.td_endian = 0;
-+	txdma_ctrl.bits.td_finish_en = 1;
-+	txdma_ctrl.bits.td_fail_en = 1;
-+	txdma_ctrl.bits.td_perr_en = 1;
-+	txdma_ctrl.bits.td_eod_en = 0;	// enable tx descript
-+	txdma_ctrl.bits.td_eof_en = 0;
-+	raid_write_reg(RAID_FCHDMA_CTRL, txdma_ctrl.bits32,0xFFFFFFFF);
-+
-+	// config rx DMA controler
-+	rxdma_ctrl.bits32 = 0;
-+	rxdma_ctrl.bits.rd_start = 0;
-+	rxdma_ctrl.bits.rd_continue = 1;
-+	rxdma_ctrl.bits.rd_chain_mode = 1;
-+	rxdma_ctrl.bits.rd_prot = 0;
-+	rxdma_ctrl.bits.rd_burst_size = 1;
-+	rxdma_ctrl.bits.rd_bus = 3;
-+	rxdma_ctrl.bits.rd_endian = 0;
-+	rxdma_ctrl.bits.rd_finish_en = 0;
-+	rxdma_ctrl.bits.rd_fail_en = 1;
-+	rxdma_ctrl.bits.rd_perr_en = 1;
-+	rxdma_ctrl.bits.rd_eod_en = 0;
-+	rxdma_ctrl.bits.rd_eof_en = 0;
-+	raid_write_reg(RAID_STRDMA_CTRL, rxdma_ctrl.bits32,0xFFFFFFFF);
-+
-+	// enable interrupt
-+	dma_status.bits32 = 3;	// enable RpInt
-+	raid_write_reg(RAID_DMA_STATUS, dma_status.bits32,0xFFFFFFFF);
-+
-+	return 0;
-+}
-+
-+module_init(gemini_xor_init);
-+module_exit(gemini_xor_exit);
-+
---- a/arch/arm/mm/Kconfig
-+++ b/arch/arm/mm/Kconfig
-@@ -187,6 +187,26 @@
- 	  Say Y if you want support for the ARM926T processor.
- 	  Otherwise, say N.
- 
-+###### for Storlink SoC ######
-+config CPU_FA526
-+	bool "FA526 processor"
-+	depends on ARCH_SL2312
-+	default y
-+	select CPU_32v4
-+	select CPU_ABRT_EV4
-+	select CPU_CACHE_FA
-+	select CPU_CACHE_VIVT
-+	select CPU_CP15_MMU
-+	select CPU_COPY_FA
-+	select CPU_TLB_FA
-+	select CPU_FA_BTB
-+	help
-+	  The FA526 is a version of the ARM9 compatible processor, but with smaller
-+	  instruction and data caches. It is used in Storlink Sword device family.
-+
-+	  Say Y if you want support for the FA526 processor.
-+	  Otherwise, say N.
-+
- # ARM940T
- config CPU_ARM940T
- 	bool "Support ARM940T processor" if ARCH_INTEGRATOR
-@@ -461,6 +481,9 @@
- config CPU_CACHE_VIPT
- 	bool
- 
-+config CPU_CACHE_FA
-+	bool
-+
- if MMU
- # The copy-page model
- config CPU_COPY_V3
-@@ -475,6 +498,12 @@
- config CPU_COPY_V6
- 	bool
- 
-+config CPU_COPY_FA
-+	bool
-+
-+config CPU_FA_BTB
-+	bool
-+
- # This selects the TLB model
- config CPU_TLB_V3
- 	bool
-@@ -534,6 +563,14 @@
- config IO_36
- 	bool
- 
-+config CPU_TLB_FA
-+	bool
-+	help
-+	  //TODO
-+	  Faraday ARM FA526 architecture, unified TLB with writeback cache
-+	  and invalidate instruction cache entry. Branch target buffer is also
-+	  supported.
-+
- comment "Processor Features"
- 
- config ARM_THUMB
-@@ -600,7 +637,7 @@
- 
- config CPU_DCACHE_WRITETHROUGH
- 	bool "Force write through D-cache"
--	depends on (CPU_ARM740T || CPU_ARM920T || CPU_ARM922T || CPU_ARM925T || CPU_ARM926T || CPU_ARM940T || CPU_ARM946E || CPU_ARM1020) && !CPU_DCACHE_DISABLE
-+	depends on (CPU_ARM740T || CPU_ARM920T || CPU_ARM922T || CPU_ARM925T || CPU_ARM926T || CPU_ARM940T || CPU_ARM946E || CPU_ARM1020 || CPU_FA526) && !CPU_DCACHE_DISABLE
- 	default y if CPU_ARM925T
- 	help
- 	  Say Y here to use the data cache in writethrough mode. Unless you
---- a/arch/arm/mm/Makefile
-+++ b/arch/arm/mm/Makefile
-@@ -32,6 +32,7 @@
- obj-$(CONFIG_CPU_CACHE_V4WB)	+= cache-v4wb.o
- obj-$(CONFIG_CPU_CACHE_V6)	+= cache-v6.o
- obj-$(CONFIG_CPU_CACHE_V7)	+= cache-v7.o
-+obj-$(CONFIG_CPU_CACHE_FA)	+= cache-fa.o
- 
- obj-$(CONFIG_CPU_COPY_V3)	+= copypage-v3.o
- obj-$(CONFIG_CPU_COPY_V4WT)	+= copypage-v4wt.o
-@@ -40,6 +41,7 @@
- obj-$(CONFIG_CPU_SA1100)	+= copypage-v4mc.o
- obj-$(CONFIG_CPU_XSCALE)	+= copypage-xscale.o
- obj-$(CONFIG_CPU_XSC3)		+= copypage-xsc3.o
-+obj-$(CONFIG_CPU_COPY_FA)	+= copypage-fa.o
- 
- obj-$(CONFIG_CPU_TLB_V3)	+= tlb-v3.o
- obj-$(CONFIG_CPU_TLB_V4WT)	+= tlb-v4.o
-@@ -47,6 +49,7 @@
- obj-$(CONFIG_CPU_TLB_V4WBI)	+= tlb-v4wbi.o
- obj-$(CONFIG_CPU_TLB_V6)	+= tlb-v6.o
- obj-$(CONFIG_CPU_TLB_V7)	+= tlb-v7.o
-+obj-$(CONFIG_CPU_TLB_FA)	+= tlb-fa.o
- 
- obj-$(CONFIG_CPU_ARM610)	+= proc-arm6_7.o
- obj-$(CONFIG_CPU_ARM710)	+= proc-arm6_7.o
-@@ -60,6 +63,7 @@
- obj-$(CONFIG_CPU_ARM926T)	+= proc-arm926.o
- obj-$(CONFIG_CPU_ARM940T)	+= proc-arm940.o
- obj-$(CONFIG_CPU_ARM946E)	+= proc-arm946.o
-+obj-$(CONFIG_CPU_FA526)		+= proc-fa526.o
- obj-$(CONFIG_CPU_ARM1020)	+= proc-arm1020.o
- obj-$(CONFIG_CPU_ARM1020E)	+= proc-arm1020e.o
- obj-$(CONFIG_CPU_ARM1022)	+= proc-arm1022.o
---- /dev/null
-+++ b/arch/arm/mm/cache-fa.S
-@@ -0,0 +1,400 @@
-+/*
-+ *  linux/arch/arm/mm/cache-fa.S
-+ *
-+ *  Copyright (C) 2005 Faraday Corp.
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ *
-+ *  Processors: FA520 FA526 FA626	
-+ * 03/31/2005 :	Luke Lee created, modified from cache-v4wb.S
-+ * 04/06/2005 :	1. Read CR0-1 and determine the cache size dynamically,
-+ *		   to suit all Faraday CPU series
-+ *	        2. Fixed all functions
-+ * 04/08/2005 :	insert CONFIG_CPU_ICACHE_DISABLE and CONFIG_CPU_DCACHE_DISABLE
-+ * 04/12/2005 :	TODO: make this processor dependent or a self-modifying code to 
-+ *	        inline cache len/size info into the instructions, as reading cache 
-+ *	        size and len info in memory could cause another cache miss.
-+ * 05/05/2005 :	Modify fa_flush_user_cache_range to comply APCS.
-+ * 05/19/2005 :	Adjust for boundary conditions.
-+ */
-+#include 
-+#include 
-+#include 
-+#include 
-+#include "proc-macros.S"
-+
-+#define CACHE_DLINESIZE	   16
-+#ifdef CONFIG_SL3516_ASIC
-+#define CACHE_DSIZE	   8192
-+#else
-+#define CACHE_DSIZE	   16384 
-+#endif 
-+#define CACHE_ILINESIZE	   16
-+#define CACHE_ISIZE	   16384
-+
-+/* Luke Lee 04/06/2005 ins begin */
-+/*
-+ *	initialize_cache_info()
-+ *
-+ *	Automatic detection of DSIZE, DLEN, ISIZE, ILEN variables according to 
-+ *	system register CR0-1
-+ *	Destroyed register: r0, r1, r2, r3, ip
-+ */
-+	.align
-+ENTRY(fa_initialize_cache_info)
-+	mov	r3, #1				@ r3 always = 1
-+	adr	ip, __fa_cache_ilen
-+	
-+	mrc	p15, 0, r0, c0, c0, 1
-+	/* ILEN */
-+	and	r1, r0, #3			@ bits [1:0]
-+	add	r1, r1, #3			@ cache line size is at least 8 bytes (2^3)
-+	mov	r2, r3, lsl r1			@ r2 = 1<= limit?
-+	bhs	__flush_whole_cache		@ flush whole D cache
-+
-+	//debug_Aaron
-+        bic     r0, r0, #CACHE_DLINESIZE-1  
-+	mcr	p15, 0, r0, c7, c14, 1		@ clean and invalidate boundary D entry
-+        bic     r1, r1, #CACHE_DLINESIZE-1  
-+	mcr	p15, 0, r1, c7, c14, 1		@ clean and invalidate boundary D entry
-+
-+
-+1:	/* Luke Lee 04/06/2005 del 2 ins 5 */
-+	
-+#ifdef CONFIG_CPU_DCACHE_WRITETHROUGH
-+	mcr	p15, 0, r0, c7, c6, 1		@ invalidate D entry
-+#else
-+	mcr	p15, 0, r0, c7, c14, 1		@ clean and invalidate D entry
-+#endif
-+	/* Luke Lee 04/06/2005 mod 1 */
-+	add	r0, r0, #CACHE_DLINESIZE
-+	cmp	r0, r1
-+	bls	1b				@ Luke Lee 05/19/2005
-+#endif	/* CONFIG_CPU_DCACHE_DISABLE */
-+	
-+#ifndef CONFIG_CPU_FA_WB_DISABLE
-+	tst	r2, #VM_EXEC
-+	/* Luke Lee 04/06/2005 mod 1 tofix todo : ne->eq */
-+	mcreq	p15, 0, r4, c7, c10, 4		@ drain write buffer
-+#endif
-+
-+	/* Luke Lee 04/06/2005 ins block */
-+#ifdef CONFIG_CPU_FA_BTB
-+        tst     r2, #VM_EXEC
-+	mov	ip, #0
-+	mcrne	p15, 0, ip, c7, c5, 6		@ invalidate BTB
-+	nop
-+	nop
-+#endif
-+	mov	pc, lr
-+
-+/*
-+ *	flush_kern_dcache_page(void *page)
-+ *
-+ *	Ensure no D cache aliasing occurs, either with itself or
-+ *	the I cache
-+ *
-+ *	- addr	- page aligned address
-+ */
-+ENTRY(fa_flush_kern_dcache_page)
-+	add	r1, r0, #PAGE_SZ
-+	/* fall through */
-+
-+/*
-+ *	coherent_kern_range(start, end)
-+ *
-+ *	Ensure coherency between the Icache and the Dcache in the
-+ *	region described by start.  If you have non-snooping
-+ *	Harvard caches, you need to implement this function.
-+ *
-+ *	- start  - virtual start address
-+ *	- end	 - virtual end address
-+ */
-+ENTRY(fa_coherent_kern_range)
-+	/* fall through */
-+
-+/*
-+ *	coherent_user_range(start, end)
-+ *
-+ *	Ensure coherency between the Icache and the Dcache in the
-+ *	region described by start.  If you have non-snooping
-+ *	Harvard caches, you need to implement this function.
-+ *
-+ *	- start  - virtual start address
-+ *	- end	 - virtual end address
-+ */
-+ENTRY(fa_coherent_user_range)
-+
-+/* Luke Lee 04/06/2005 mod ok */
-+	/* Luke Lee 04/06/2005 ins 3 mod 1 */
-+	bic	r0, r0, #CACHE_DLINESIZE-1
-+
-+ //debug_Aaron
-+        bic     r0, r0, #CACHE_DLINESIZE-1
-+        mcr     p15, 0, r0, c7, c14, 1          @ clean and invalidate boundary D entry
-+        bic     r1, r1, #CACHE_DLINESIZE-1
-+        mcr     p15, 0, r1, c7, c14, 1          @ clean and invalidate boundary D entry
-+
-+#if !(defined(CONFIG_CPU_DCACHE_DISABLE) && defined(CONFIG_CPU_ICACHE_DISABLE))
-+1:	/* Luke Lee 04/06/2005 del 2 ins 5 mod 1 */
-+#ifndef CONFIG_CPU_DCACHE_DISABLE	
-+#ifdef CONFIG_CPU_DCACHE_WRITETHROUGH
-+	mcr	p15, 0, r0, c7, c6, 1		@ invalidate D entry
-+#else
-+	mcr	p15, 0, r0, c7, c14, 1		@ clean and invalidate D entry
-+#endif
-+#endif /* CONFIG_CPU_DCACHE_DISABLE */
-+	
-+#ifndef CONFIG_CPU_ICACHE_DISABLE
-+	mcr	p15, 0, r0, c7, c5, 1		@ invalidate I entry
-+#endif
-+	add	r0, r0, #CACHE_DLINESIZE
-+	cmp	r0, r1
-+	bls	1b				@ Luke Lee 05/19/2005 blo->bls	
-+#endif /* !(defined(CONFIG_CPU_DCACHE_DISABLE) && defined(CONFIG_CPU_ICACHE_DISABLE)) */
-+
-+	mov	ip, #0
-+#ifdef CONFIG_CPU_FA_BTB
-+	mcr	p15, 0, ip, c7, c5, 6		@ invalidate BTB
-+	nop
-+	nop
-+#endif
-+
-+/* Luke Lee 04/08/2005 ins 1 skp 1 ins 1 */
-+#ifndef CONFIG_CPU_FA_WB_DISABLE
-+	mcr	p15, 0, ip, c7, c10, 4		@ drain WB
-+#endif
-+
-+	mov	pc, lr
-+
-+/*
-+ *	dma_inv_range(start, end)
-+ *
-+ *	Invalidate (discard) the specified virtual address range.
-+ *	May not write back any entries.  If 'start' or 'end'
-+ *	are not cache line aligned, those lines must be written
-+ *	back.
-+ *
-+ *	- start  - virtual start address
-+ *	- end	 - virtual end address
-+ */
-+ENTRY(fa_dma_inv_range)
-+
-+/* Luke Lee 04/06/2005 mod ok */
-+
-+#ifndef CONFIG_CPU_DCACHE_DISABLE	
-+
-+ //debug_Aaron
-+        bic     r0, r0, #CACHE_DLINESIZE-1
-+        mcr     p15, 0, r0, c7, c6, 1          @ invalidate boundary D entry
-+        bic     r1, r1, #CACHE_DLINESIZE-1
-+        mcr     p15, 0, r1, c7, c6, 1          @ invalidate boundary D entry
-+
-+	/* Luke Lee 04/06/2005 ins 4 mod 2 */
-+#ifndef CONFIG_CPU_DCACHE_WRITETHROUGH
-+	tst	r0, #CACHE_DLINESIZE -1
-+	bic	r0, r0, #CACHE_DLINESIZE -1
-+
-+//debug_Aaron
-+	//mcrne	p15, 0, r0, c7, c10, 1		@ clean boundary D entry
-+
-+	/* Luke Lee 04/06/2005 mod 1 */
-+	/* Luke Lee 05/19/2005 always clean the end-point boundary mcrne->mcr */
-+	////tst	r1, #CACHE_DLINESIZE -1
-+	//mcr	p15, 0, r1, c7, c10, 1		@ clean boundary D entry
-+	/* Luke Lee 04/06/2005 ins 1 */
-+#else
-+	bic	r0, r0, #CACHE_DLINESIZE -1	
-+#endif
-+
-+//debug_Aaron	
-+1:	mcr	p15, 0, r0, c7, c6, 1		@ invalidate D entry
-+//1:	mcr	p15, 0, r0, c7, c14, 1		@ clean and invalidate D entry
-+
-+	/* Luke Lee 04/06/2005 mod 1 */	
-+	add	r0, r0, #CACHE_DLINESIZE
-+	cmp	r0, r1
-+	bls	1b				@ Luke Lee 05/19/2005 blo->bls
-+#endif /* CONFIG_CPU_DCACHE_DISABLE */
-+
-+	/* Luke Lee 04/06/2005 ins 1 */		
-+#ifndef CONFIG_CPU_FA_WB_DISABLE
-+	mov	r0, #0
-+	mcr	p15, 0, r0, c7, c10, 4		@ drain write buffer
-+#endif	
-+
-+	mov	pc, lr
-+
-+/*
-+ *	dma_clean_range(start, end)
-+ *
-+ *	Clean (write back) the specified virtual address range.
-+ *
-+ *	- start  - virtual start address
-+ *	- end	 - virtual end address
-+ */
-+ENTRY(fa_dma_clean_range)
-+
-+/* Luke Lee 04/06/2005 mod ok */
-+#ifndef CONFIG_CPU_DCACHE_DISABLE	
-+
-+ //debug_Aaron
-+        bic     r0, r0, #CACHE_DLINESIZE-1
-+        mcr     p15, 0, r0, c7, c10, 1          @ clean boundary D entry
-+        bic     r1, r1, #CACHE_DLINESIZE-1
-+        mcr     p15, 0, r1, c7, c10, 1          @ clean boundary D entry
-+
-+	/* Luke Lee 04/06/2005 ins 4 mod 2 */
-+#ifndef CONFIG_CPU_DCACHE_WRITETHROUGH
-+	bic	r0, r0, #CACHE_DLINESIZE - 1
-+
-+//debug_Aaron
-+1:	mcr	p15, 0, r0, c7, c10, 1		@ clean D entry
-+//1:	mcr	p15, 0, r0, c7, c14, 1		@ clean D entry
-+	add	r0, r0, #CACHE_DLINESIZE
-+	cmp	r0, r1
-+	bls	1b				@ Luke Lee 05/19/2005 blo->bls
-+	/* Luke Lee 04/06/2005 ins 2 */
-+#endif
-+#endif /* CONFIG_CPU_DCACHE_DISABLE */
-+
-+#ifndef CONFIG_CPU_FA_WB_DISABLE
-+	mov	r0, #0	
-+	mcr	p15, 0, r0, c7, c10, 4		@ drain write buffer
-+#endif	
-+
-+	mov	pc, lr
-+
-+/*
-+ *	dma_flush_range(start, end)
-+ *
-+ *	Clean and invalidate the specified virtual address range.
-+ *
-+ *	- start  - virtual start address
-+ *	- end	 - virtual end address
-+ *
-+ *	This is actually the same as fa_coherent_kern_range()
-+ */
-+	.globl	fa_dma_flush_range
-+	.set	fa_dma_flush_range, fa_coherent_kern_range
-+
-+	__INITDATA
-+
-+	.type	fa_cache_fns, #object
-+ENTRY(fa_cache_fns)
-+	.long	fa_flush_kern_cache_all
-+	.long	fa_flush_user_cache_all
-+	.long	fa_flush_user_cache_range
-+	.long	fa_coherent_kern_range
-+	.long	fa_coherent_user_range
-+	.long	fa_flush_kern_dcache_page
-+	.long	fa_dma_inv_range
-+	.long	fa_dma_clean_range
-+	.long	fa_dma_flush_range
-+	.size	fa_cache_fns, . - fa_cache_fns
---- /dev/null
-+++ b/arch/arm/mm/copypage-fa.S
-@@ -0,0 +1,106 @@
-+/*
-+ *  linux/arch/arm/lib/copypage-fa.S
-+ *
-+ *  Copyright (C) 2005 Faraday Corp.
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ *
-+ *  ASM optimised string functions
-+ * 05/18/2005 :	Luke Lee created, modified from copypage-v4wb.S
-+ */
-+#include 
-+#include 
-+#include 
-+
-+	.text
-+/*
-+ * ARMv4 optimised copy_user_page for Faraday processors
-+ *
-+ * We flush the destination cache lines just before we write the data into the
-+ * corresponding address.  Since the Dcache is read-allocate, this removes the
-+ * Dcache aliasing issue.  The writes will be forwarded to the write buffer,
-+ * and merged as appropriate.
-+ *
-+ * Note: We rely on all ARMv4 processors implementing the "invalidate D line"
-+ * instruction.  If your processor does not supply this, you have to write your
-+ * own copy_user_page that does the right thing.
-+ *
-+ * copy_user_page(to,from,vaddr)
-+ */
-+	.align	4
-+ENTRY(fa_copy_user_page)
-+#ifdef CONFIG_CPU_DCACHE_WRITETHROUGH
-+	/* Write through */
-+	stmfd	sp!, {r4, lr}			@ 2
-+	mov	r2, #PAGE_SZ/32			@ 1
-+
-+	ldmia	r1!, {r3, r4, ip, lr}		@ 4
-+1:	stmia	r0!, {r3, r4, ip, lr}		@ 4
-+	ldmia	r1!, {r3, r4, ip, lr}		@ 4+1
-+	subs	r2, r2, #1			@ 1
-+	stmia	r0!, {r3, r4, ip, lr}		@ 4
-+	ldmneia	r1!, {r3, r4, ip, lr}		@ 4
-+	bne	1b				@ 1
-+
-+	mcr	p15, 0, r2, c7, c7, 0		@ flush ID cache
-+	ldmfd	sp!, {r4, pc}			@ 3
-+#else
-+	/* Write back */
-+	stmfd	sp!, {r4, lr}			@ 2
-+	mov	r2, #PAGE_SZ/32			@ 1
-+
-+1:	ldmia	r1!, {r3, r4, ip, lr}		@ 4
-+	mcr	p15, 0, r0, c7, c6, 1		@ 1   invalidate D line
-+	stmia	r0!, {r3, r4, ip, lr}		@ 4
-+	ldmia	r1!, {r3, r4, ip, lr}		@ 4
-+	mcr	p15, 0, r0, c7, c6, 1		@ 1   invalidate D line
-+	stmia	r0!, {r3, r4, ip, lr}		@ 4
-+	subs	r2, r2, #1			@ 1
-+	bne	1b
-+	mcr	p15, 0, r2, c7, c10, 4		@ 1   drain WB
-+	ldmfd	sp!, {r4, pc}			@ 3
-+#endif
-+
-+/*
-+ * ARMv4 optimised clear_user_page
-+ *
-+ * Same story as above.
-+ */
-+	.align	4
-+ENTRY(fa_clear_user_page)
-+	str	lr, [sp, #-4]!
-+	mov	r1, #PAGE_SZ/32			@ 1
-+	mov	r2, #0				@ 1
-+	mov	r3, #0				@ 1
-+	mov	ip, #0				@ 1
-+	mov	lr, #0				@ 1
-+#ifdef CONFIG_CPU_DCACHE_WRITETHROUGH
-+	/* Write through */
-+1:	stmia	r0!, {r2, r3, ip, lr}		@ 4
-+	stmia	r0!, {r2, r3, ip, lr}		@ 4
-+	subs	r1, r1, #1			@ 1
-+	bne	1b				@ 1
-+
-+	mcr	p15, 0, r1, c7, c7, 0		@ flush ID cache
-+	ldr	pc, [sp], #4
-+#else
-+	/* Write back */
-+1:	mcr	p15, 0, r0, c7, c6, 1		@ 1   invalidate D line
-+	stmia	r0!, {r2, r3, ip, lr}		@ 4
-+	mcr	p15, 0, r0, c7, c6, 1		@ 1   invalidate D line
-+	stmia	r0!, {r2, r3, ip, lr}		@ 4
-+	subs	r1, r1, #1			@ 1
-+	bne	1b				@ 1
-+	mcr	p15, 0, r1, c7, c10, 4		@ 1   drain WB
-+	ldr	pc, [sp], #4
-+#endif
-+
-+	__INITDATA
-+
-+	.type	fa_user_fns, #object
-+ENTRY(fa_user_fns)
-+	.long	fa_clear_user_page
-+	.long	fa_copy_user_page
-+	.size	fa_user_fns, . - fa_user_fns
---- a/arch/arm/mm/init.c
-+++ b/arch/arm/mm/init.c
-@@ -23,6 +23,7 @@
- 
- #include 
- #include 
-+#include 
- 
- #include "mm.h"
- 
-@@ -252,6 +253,11 @@
- 		initrd_end = initrd_start + phys_initrd_size;
- 	}
- #endif
-+#ifdef CONFIG_GEMINI_IPI
-+	printk("CPU ID:%d\n",getcpuid());
-+//	reserve_bootmem_node(NODE_DATA(0), 0x400000, 0x400000);		//CPU0 space
-+//	reserve_bootmem_node(NODE_DATA(0), SHAREADDR, SHARE_MEM_SIZE);		//share memory
-+#endif
- 
- 	/*
- 	 * Finally, reserve any node zero regions.
---- /dev/null
-+++ b/arch/arm/mm/proc-fa526.S
-@@ -0,0 +1,407 @@
-+/*
-+ *  linux/arch/arm/mm/proc-fa526.S: MMU functions for FA526
-+ *
-+ *  Copyright (C) 2005 Faraday Corp.
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
-+ *
-+ *
-+ * These are the low level assembler for performing cache and TLB
-+ * functions on the fa526.
-+ *
-+ *  Written by : Luke Lee
-+ */
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include "proc-macros.S"
-+
-+#define CACHE_DLINESIZE	   16
-+
-+	.text
-+/*
-+ * cpu_fa526_proc_init()
-+ */
-+ENTRY(cpu_fa526_proc_init)
-+	/* MMU is already ON here, ICACHE, DCACHE conditionally disabled */
-+
-+        mov     r0, #1
-+	nop
-+	nop
-+        mcr     p15, 0, r0, c1, c1, 0		@ turn-on ECR
-+	nop
-+	nop
-+
-+	mrc	p15, 0, r0, c1, c0, 0		@ read ctrl register
-+
-+#ifdef CONFIG_CPU_FA_BTB
-+	orr	r0, r0, #CR_Z
-+#else
-+	bic	r0, r0, #CR_Z
-+#endif
-+#ifdef CONFIG_CPU_FA_WB_DISABLE
-+	mov	r1, #0
-+	mcr	p15, 0, r1, c7, c10, 4		@ drain write buffer
-+	nop
-+	nop
-+	bic	r0, r0, #CR_W
-+#else
-+	orr	r0, r0, #CR_W
-+#endif
-+#ifdef CONFIG_CPU_DCACHE_DISABLE
-+	bic	r0, r0, #CR_C
-+#else
-+	orr	r0, r0, #CR_C
-+#endif
-+#ifdef CONFIG_CPU_ICACHE_DISABLE
-+	bic	r0, r0, #CR_I
-+#else
-+	orr	r0, r0, #CR_I
-+#endif
-+
-+	nop
-+	nop
-+    	mcr	p15, 0, r0, c1, c0, 0
-+	nop
-+	nop
-+
-+	mov	r5, lr
-+	bl	fa_initialize_cache_info	@ destroy r0~r4
-+	mov	pc, r5				@ return
-+
-+
-+/*
-+ * cpu_fa526_proc_fin()
-+ */
-+ENTRY(cpu_fa526_proc_fin)
-+	stmfd	sp!, {lr}
-+	mov	ip, #PSR_F_BIT | PSR_I_BIT | SVC_MODE
-+	msr	cpsr_c, ip
-+
-+	bl	fa_flush_kern_cache_all
-+	mrc	p15, 0, r0, c1, c0, 0		@ ctrl register
-+	bic	r0, r0, #0x1000			@ ...i............
-+	bic	r0, r0, #0x000e			@ ............wca.
-+	mcr	p15, 0, r0, c1, c0, 0		@ disable caches
-+
-+	nop
-+	nop
-+	ldmfd	sp!, {pc}
-+
-+/*
-+ * cpu_fa526_reset(loc)
-+ *
-+ * Perform a soft reset of the system.  Put the CPU into the
-+ * same state as it would be if it had been reset, and branch
-+ * to what would be the reset vector.
-+ *
-+ * loc: location to jump to for soft reset
-+ */
-+	.align	4
-+ENTRY(cpu_fa526_reset)
-+	mov	ip, #0
-+	mcr	p15, 0, ip, c7, c7, 0		@ invalidate I,D caches
-+#ifndef CONFIG_CPU_FA_WB_DISABLE
-+	mcr	p15, 0, ip, c7, c10, 4		@ drain WB
-+#endif
-+	mcr	p15, 0, ip, c8, c7, 0		@ invalidate I & D TLBs
-+	mrc	p15, 0, ip, c1, c0, 0		@ ctrl register
-+	bic	ip, ip, #0x000f			@ ............wcam
-+	bic	ip, ip, #0x1100			@ ...i...s........
-+
-+	bic	ip, ip, #0x0800			@ BTB off
-+	mcr	p15, 0, ip, c1, c0, 0		@ ctrl register
-+	nop
-+	nop
-+	mov	pc, r0
-+
-+/*
-+ * cpu_fa526_do_idle()
-+ */
-+	.align	4
-+ENTRY(cpu_fa526_do_idle)
-+
-+#ifdef CONFIG_CPU_FA_IDLE
-+	nop
-+	nop
-+	mcr	p15, 0, r0, c7, c0, 4		@ Wait for interrupt (IDLE mode)
-+#endif
-+	mov	pc, lr
-+
-+
-+ENTRY(cpu_fa526_dcache_clean_area)
-+
-+#ifndef CONFIG_CPU_DCACHE_DISABLE
-+#ifndef CONFIG_CPU_DCACHE_WRITETHROUGH
-+1:	mcr	p15, 0, r0, c7, c10, 1		@ clean D entry
-+	add	r0, r0, #CACHE_DLINESIZE
-+	subs	r1, r1, #CACHE_DLINESIZE
-+	bhi	1b
-+#endif
-+#endif
-+	mov	pc, lr
-+
-+
-+/* =============================== PageTable ============================== */
-+
-+/*
-+ * cpu_fa526_switch_mm(pgd)
-+ *
-+ * Set the translation base pointer to be as described by pgd.
-+ *
-+ * pgd: new page tables
-+ */
-+	.align	4
-+
-+	.globl	fault_address
-+fault_address:
-+	.long	0
-+
-+ENTRY(cpu_fa526_switch_mm)
-+
-+	mov	ip, #0
-+#ifndef CONFIG_CPU_DCACHE_DISABLE
-+#ifdef CONFIG_CPU_DCACHE_WRITETHROUGH
-+	mcr	p15, 0, ip, c7, c6, 0		@ invalidate D cache
-+#else
-+	mcr	p15, 0, ip, c7, c14, 0		@ Clean and invalidate whole DCache
-+#endif
-+#endif /*CONFIG_CPU_DCACHE_DISABLE*/
-+
-+#ifndef CONFIG_CPU_ICACHE_DISABLE
-+	mcr	p15, 0, ip, c7, c5, 0		@ invalidate I cache
-+#endif
-+
-+#ifndef CONFIG_CPU_FA_WB_DISABLE
-+	mcr	p15, 0, ip, c7, c10, 4		@ drain WB
-+#endif
-+
-+#ifdef CONFIG_CPU_FA_BTB
-+	mcr	p15, 0, ip, c7, c5, 6		@ invalidate BTB since mm changed
-+	nop
-+	nop
-+#endif
-+	bic	r0, r0, #0xff			@ clear bits [7:0]
-+	bic	r0, r0, #0x3f00			@ clear bits [13:8]
-+	mcr	p15, 0, r0, c2, c0, 0		@ load page table pointer
-+	mcr	p15, 0, ip, c8, c7, 0		@ invalidate UTLB
-+	nop
-+	nop
-+	mov	pc, lr
-+
-+/*
-+ * cpu_fa526_set_pte_ext(ptep, pte, ext)
-+ *
-+ * Set a PTE and flush it out
-+ */
-+	.align	4
-+ENTRY(cpu_fa526_set_pte_ext)
-+	str	r1, [r0], #-2048		@ linux version
-+
-+	eor	r1, r1, #L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_WRITE | L_PTE_DIRTY
-+
-+	bic	r2, r1, #PTE_SMALL_AP_MASK
-+	bic	r2, r2, #PTE_TYPE_MASK
-+	orr	r2, r2, #PTE_TYPE_SMALL
-+
-+	tst	r1, #L_PTE_USER			@ User?
-+	orrne	r2, r2, #PTE_SMALL_AP_URO_SRW
-+
-+	tst	r1, #L_PTE_WRITE | L_PTE_DIRTY	@ Write and Dirty?
-+	orreq	r2, r2, #PTE_SMALL_AP_UNO_SRW
-+
-+	tst	r1, #L_PTE_PRESENT | L_PTE_YOUNG	@ Present and Young?
-+	movne	r2, #0
-+
-+#ifdef CONFIG_CPU_DCACHE_WRITETHROUGH
-+	eor	r3, r2, #0x0a			@ C & small page?  1010
-+	tst	r3, #0x0b			@		   1011
-+	biceq	r2, r2, #4
-+#endif
-+	str	r2, [r0]			@ hardware version
-+
-+	mov	r2, #0
-+	mcr	p15, 0, r2, c7, c10, 0		@ clean D cache	all
-+
-+#ifndef CONFIG_CPU_FA_WB_DISABLE
-+	mcr	p15, 0, r2, c7, c10, 4		@ drain WB
-+#endif
-+#ifdef CONFIG_CPU_FA_BTB
-+	mcr	p15, 0, r2, c7, c5, 6		@ invalidate BTB
-+	nop
-+	nop
-+#endif
-+	mov	pc, lr
-+
-+	__INIT
-+
-+	.type	__fa526_setup, #function
-+__fa526_setup:
-+	/* On return of this routine, r0 must carry correct flags for CFG register */
-+	mov	r0, #0
-+	mcr	p15, 0, r0, c7, c7		@ invalidate I,D caches on v4
-+	mcr	p15, 0, r0, c7, c10, 4		@ drain write buffer on v4
-+	mcr	p15, 0, r0, c8, c7		@ invalidate I,D TLBs on v4
-+
-+	mcr	p15, 0, r0, c7, c5, 5		@ invalidate IScratchpad RAM
-+
-+        mov     r0, #1
-+        mcr     p15, 0, r0, c1, c1, 0		@ turn-on ECR
-+
-+	mrc	p15, 0, r0, c9, c1, 0		@ DScratchpad
-+	bic	r0, r0, #1
-+	mcr	p15, 0, r0, c9, c1, 0
-+	mrc	p15, 0, r0, c9, c1, 1		@ IScratchpad
-+	bic	r0, r0, #1
-+	mcr	p15, 0, r0, c9, c1, 1
-+
-+	mov	r0, #0
-+	mcr	p15, 0, r0, c1, c1, 0		@ turn-off ECR
-+
-+#ifdef CONFIG_CPU_FA_BTB
-+	mcr	p15, 0, r0, c7, c5, 6		@ invalidate BTB All
-+	nop
-+	nop
-+#endif
-+
-+	mov	r0, #0x1f			@ Domains 0, 1 = manager, 2 = client
-+	mcr	p15, 0, r0, c3, c0		@ load domain access register
-+
-+	mrc	p15, 0, r0, c1, c0		@ get control register v4
-+	ldr	r5, fa526_cr1_clear
-+	bic	r0, r0, r5
-+	ldr	r5, fa526_cr1_set
-+	orr	r0, r0, r5
-+
-+#ifdef CONFIG_CPU_FA_BTB
-+	orr	r0, r0, #CR_Z
-+#else
-+	bic	r0, r0, #CR_Z
-+#endif
-+#ifdef CONFIG_CPU_FA_WB_DISABLE
-+	mov	r12, #0
-+	mcr	p15, 0, r12, c7, c10, 4		@ drain write buffer
-+	nop
-+	nop
-+	bic	r0, r0, #CR_W			@ .... .... .... 1...
-+#else
-+	orr	r0, r0, #CR_W
-+#endif
-+
-+	mov	pc, lr
-+	.size	__fa526_setup, . - __fa526_setup
-+
-+	/*
-+	 * .RVI ZFRS BLDP WCAM
-+	 * ..11 0001 .111 1101
-+	 *
-+	 */
-+	.type	fa526_cr1_clear, #object
-+	.type	fa526_cr1_set, #object
-+fa526_cr1_clear:
-+	.word	0x3f3f
-+fa526_cr1_set:
-+	.word	0x317D
-+
-+	__INITDATA
-+
-+/*
-+ * Purpose : Function pointers used to access above functions - all calls
-+ *	     come through these
-+ */
-+	.type	fa526_processor_functions, #object
-+fa526_processor_functions:
-+	.word	v4_early_abort
-+	.word	cpu_fa526_proc_init
-+	.word	cpu_fa526_proc_fin
-+	.word	cpu_fa526_reset
-+	.word   cpu_fa526_do_idle
-+	.word	cpu_fa526_dcache_clean_area
-+	.word	cpu_fa526_switch_mm
-+	.word	cpu_fa526_set_pte_ext
-+	.size	fa526_processor_functions, . - fa526_processor_functions
-+
-+	.section ".rodata"
-+
-+	.type	cpu_arch_name, #object
-+cpu_arch_name:
-+	.asciz	"armv4"
-+	.size	cpu_arch_name, . - cpu_arch_name
-+
-+	.type	cpu_elf_name, #object
-+cpu_elf_name:
-+	.asciz	"v4"
-+	.size	cpu_elf_name, . - cpu_elf_name
-+
-+	.type	cpu_fa526_name, #object
-+cpu_fa526_name:
-+	.ascii	"FA526"
-+#ifndef CONFIG_CPU_ICACHE_DISABLE
-+	.ascii	"i"
-+#endif
-+#ifndef CONFIG_CPU_DCACHE_DISABLE
-+	.ascii	"d"
-+#ifdef CONFIG_CPU_DCACHE_WRITETHROUGH
-+	.ascii	"(wt)"
-+#else
-+	.ascii	"(wb)"
-+#endif
-+#endif
-+	.ascii	"\0"
-+	.size	cpu_fa526_name, . - cpu_fa526_name
-+
-+	.align
-+
-+	.section ".proc.info.init", #alloc, #execinstr
-+
-+#ifdef CONFIG_CPU_DCACHE_WRITETHROUGH
-+#define __PMD_SECT_BUFFERABLE	0
-+#else
-+#define __PMD_SECT_BUFFERABLE	PMD_SECT_BUFFERABLE
-+#endif
-+
-+	.type	__fa526_proc_info,#object
-+__fa526_proc_info:
-+	.long	0x66015261
-+	.long	0xff01fff1
-+	.long   PMD_TYPE_SECT | \
-+		__PMD_SECT_BUFFERABLE | \
-+		PMD_SECT_CACHEABLE | \
-+		PMD_BIT4 | \
-+		PMD_SECT_AP_WRITE | \
-+		PMD_SECT_AP_READ
-+	.long   PMD_TYPE_SECT | \
-+		PMD_BIT4 | \
-+		PMD_SECT_AP_WRITE | \
-+		PMD_SECT_AP_READ
-+	b	__fa526_setup
-+	.long	cpu_arch_name
-+	.long	cpu_elf_name
-+	.long	HWCAP_SWP | HWCAP_HALF
-+	.long	cpu_fa526_name
-+	.long	fa526_processor_functions
-+	.long	fa_tlb_fns
-+	.long	fa_user_fns
-+	.long	fa_cache_fns
-+	.size	__fa526_proc_info, . - __fa526_proc_info
-+
-+
---- /dev/null
-+++ b/arch/arm/mm/tlb-fa.S
-@@ -0,0 +1,96 @@
-+/*
-+ *  linux/arch/arm/mm/tlb-fa.S
-+ *
-+ *  Copyright (C) 2005 Faraday Corp.
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ *
-+ *  ARM architecture version 4, Faraday variation.
-+ *  This assume an unified TLBs, with a write buffer, and branch target buffer (BTB)
-+ *
-+ *  Processors: FA520 FA526 FA626
-+ *  03/31/2005 : Created by Luke Lee, modified from tlb-v4wbi.S
-+ *  05/06/2005 : Fixed buggy CPU versions that did not invalidate the associated
-+ *               data cache entries when invalidating TLB entries.
-+ */
-+#include 
-+#include 
-+#include 
-+#include 
-+#include "proc-macros.S"
-+
-+
-+/*
-+ *	flush_user_tlb_range(start, end, mm)
-+ *
-+ *	Invalidate a range of TLB entries in the specified address space.
-+ *
-+ *	- start - range start address
-+ *	- end   - range end address
-+ *	- mm    - mm_struct describing address space
-+ */
-+	.align	4
-+ENTRY(fa_flush_user_tlb_range)
-+
-+	vma_vm_mm ip, r2
-+	act_mm	r3				@ get current->active_mm
-+	eors	r3, ip, r3			@ == mm ?
-+	movne	pc, lr				@ no, we dont do anything
-+	mov	r3, #0
-+
-+#ifndef CONFIG_CPU_FA_WB_DISABLE
-+	mcr	p15, 0, r3, c7, c10, 4		@ drain WB
-+#endif
-+
-+	vma_vm_flags r2, r2
-+	bic	r0, r0, #0x0ff
-+	bic	r0, r0, #0xf00
-+
-+1:	mcr	p15, 0, r0, c8, c7, 1		@ invalidate UTLB entry
-+	add	r0, r0, #PAGE_SZ
-+	cmp	r0, r1
-+	bls	1b				@ Luke Lee 05/19/2005 blo -> bls
-+
-+#ifdef CONFIG_CPU_FA_BTB
-+	mcr	p15, 0, r3, c7, c5, 6		@ invalidate BTB
-+	nop
-+	nop
-+#endif
-+	mov	pc, lr
-+
-+
-+ENTRY(fa_flush_kern_tlb_range)
-+	mov	r3, #0
-+
-+	mcr	p15, 0, r3, c7, c10, 0		@ clean Dcache all 06/03/2005
-+
-+#ifndef CONFIG_CPU_FA_WB_DISABLE
-+	mcr	p15, 0, r3, c7, c10, 4		@ drain WB
-+#endif
-+
-+	bic	r0, r0, #0x0ff
-+	bic	r0, r0, #0xf00
-+1:
-+	mcr	p15, 0, r0, c8, c7, 1		@ invalidate UTLB entry
-+	add	r0, r0, #PAGE_SZ
-+	cmp	r0, r1
-+	bls	1b				@ Luke Lee 05/19/2005 blo -> bls
-+
-+#ifdef CONFIG_CPU_FA_BTB
-+	mcr	p15, 0, r3, c7, c5, 6		@ invalidate BTB
-+	nop
-+	nop
-+#endif
-+	mov	pc, lr
-+
-+
-+	__INITDATA
-+
-+	.type	fa_tlb_fns, #object
-+ENTRY(fa_tlb_fns)
-+	.long	fa_flush_user_tlb_range
-+	.long	fa_flush_kern_tlb_range
-+	.long	fa_tlb_flags
-+	.size	fa_tlb_fns, . - fa_tlb_fns
---- a/arch/arm/tools/mach-types
-+++ b/arch/arm/tools/mach-types
-@@ -208,7 +208,8 @@
- fester			SA1100_FESTER		FESTER			191
- gpi			ARCH_GPI		GPI			192
- smdk2410		ARCH_SMDK2410		SMDK2410		193
--i519			ARCH_I519		I519			194
-+#i519			ARCH_I519		I519			194
-+sl2312          ARCH_SL2312         SL2312          194
- nexio			SA1100_NEXIO		NEXIO			195
- bitbox			SA1100_BITBOX		BITBOX			196
- g200			SA1100_G200		G200			197
---- /dev/null
-+++ b/include/asm-arm/arch-sl2312/SL_gpio.h
-@@ -0,0 +1,59 @@
-+#define GPIO_MINOR_LAST 31
-+#define GPIO_MAJOR	120	// Experiemental
-+
-+#define GPIO_IRQ_NBR	12
-+
-+#define GPIOBASEADDR		(IO_ADDRESS(0x021000000))
-+
-+#define GPIODATAOUTOFF		0x00
-+#define GPIODATAINOFF		0x04
-+#define GPIOPINDIROFF		0x08
-+#define GPIOPINBYPASSOFF	0x0C
-+#define GPIODATASETOFF		0x10
-+#define GPIODATACLEAROFF	0x14
-+#define GPIOPINPULLENBOFF	0x18
-+#define GPIOPINPULLTPOFF	0x1C
-+#define GPIOINTRENBOFF		0x20
-+#define GPIOINTRRAWSOFF		0x24
-+#define GPIOINTRMASKEDSTATEOFF	0x28
-+#define GPIOINTRMASKOFF		0x2C
-+#define GPIOINTRCLEAROFF	0x30
-+#define GPIOINTRTRIGGEROFF	0x34
-+#define GPIOINTRBOTHOFF		0x38
-+#define GPIOINTRRISENEGOFF	0x3C
-+#define GPIOBNCEENBOFF		0x40
-+#define GPIOBNCEPRESOFF		0x44
-+
-+#define GPIO_IOCTRL_SETDIR	0x20
-+#define GPIO_IOCTRL_SET		0x40
-+#define GPIO_IOCTRL_CLEAR	0x50
-+#define GPIO_IOCTRL_ENBINT	0x60
-+#define GPIO_IOCTRL_MASKINT	0x70
-+#define GPIO_IOCTRL_LVLTRIG	0x75
-+#define GPIO_IOCTRL_EDGINT	0x77
-+#define GPIO_IOCTRL_EDGPOLINT	0x78
-+#define GPIO_IOCTRL_BYPASS	0x30
-+#define GPIO_IOCTRL_PRESCLK	0x80
-+#define GPIO_IOCTRL_CLKVAL	0x90
-+#define GPIO_IOCTRL_PULLENB	0xA0
-+#define GPIO_IOCTRL_PULLTYPE	0xA8
-+
-+
-+#define GPIO_MAJOR	120	/* experimental MAJOR number */
-+				// Minor - 0 : 31 gpio pins
-+
-+#define GPIO_SET	0x01
-+#define GPIO_CLEAR	0x01
-+
-+#define GPIO_INPUT	0
-+#define GPIO_OUTPUT	1
-+#define GPIO_EDGEINTR 	0
-+#define GPIO_EDGESINGL	0
-+#define GPIO_EDGEBOTH	1
-+#define GPIO_POSITIVE	0
-+#define GPIO_ENBINT	1
-+#define GPIO_DISABLEMASK	1
-+#define GPIO_PULLDOWN	0
-+#define GPIO_PULLUP	1
-+#define GPIO_ENABLEPULL	1
-+#define GPIO_DISABLEPULL	0
---- /dev/null
-+++ b/include/asm-arm/arch-sl2312/debug-macro.S
-@@ -0,0 +1,20 @@
-+/* linux/include/asm-arm/arch-ebsa110/debug-macro.S
-+ *
-+ * Debugging macro include header
-+ *
-+ *  Copyright (C) 1994-1999 Russell King
-+ *  Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ *
-+**/
-+
-+		.macro	addruart,rx
-+		mov	\rx, #0x42000000
-+		.endm
-+
-+#define UART_SHIFT	2
-+#define FLOW_CONTROL
-+#include 
---- /dev/null
-+++ b/include/asm-arm/arch-sl2312/dma.h
-@@ -0,0 +1,28 @@
-+/*
-+ *  linux/include/asm-arm/arch-camelot/dma.h
-+ *
-+ *  Copyright (C) 1997,1998 Russell King
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
-+ */
-+#ifndef __ASM_ARCH_DMA_H
-+#define __ASM_ARCH_DMA_H
-+
-+#define MAX_DMA_ADDRESS		0xffffffff
-+
-+#define MAX_DMA_CHANNELS	0
-+
-+#endif /* _ASM_ARCH_DMA_H */
-+
---- /dev/null
-+++ b/include/asm-arm/arch-sl2312/entry-macro.S
-@@ -0,0 +1,42 @@
-+/*
-+ * include/asm-arm/arch-arm/entry-macro.S
-+ *
-+ * Low-level IRQ helper macros for ebsa110 platform.
-+ *
-+ * This file is licensed under  the terms of the GNU General Public
-+ * License version 2. This program is licensed "as is" without any
-+ * warranty of any kind, whether express or implied.
-+ */
-+#include 
-+#include 
-+
-+
-+                .macro  disable_fiq
-+                .endm
-+
-+                .macro  get_irqnr_preamble, base, tmp
-+                .endm
-+
-+                .macro  arch_ret_to_user, tmp1, tmp2
-+                .endm
-+
-+                .macro  get_irqnr_and_base, irqnr, irqstat, base, tmp
-+                ldr     \irqstat, =IRQ_STATUS(IO_ADDRESS(SL2312_INTERRUPT_BASE))
-+                ldr     \irqnr,[\irqstat]
-+                cmp     \irqnr,#0
-+                beq     2313f
-+                mov     \tmp,\irqnr
-+                mov     \irqnr,#0
-+2312:
-+                tst     \tmp, #1
-+                bne     2313f
-+                add     \irqnr, \irqnr, #1
-+                mov     \tmp, \tmp, lsr #1
-+                cmp     \irqnr, #31
-+                bcc     2312b
-+2313:
-+                .endm
-+
-+                .macro  irq_prio_table
-+                .endm
-+
---- /dev/null
-+++ b/include/asm-arm/arch-sl2312/flash.h
-@@ -0,0 +1,83 @@
-+#ifndef __ASM_ARM_ARCH_FLASH_H
-+#define __ASM_ARM_ARCH_FLASH_H
-+
-+#define FLASH_START                                     SL2312_FLASH_BASE
-+#define SFLASH_SIZE                      		0x00400000
-+#define SPAGE_SIZE                       		0x200
-+#define BLOCK_ERASE                     		0x50
-+#define BUFFER1_READ                    		0x54
-+#define BUFFER2_READ                    		0x56
-+#define PAGE_ERASE                      		0x81
-+#define MAIN_MEMORY_PAGE_READ           		0x52
-+#define MAIN_MEMORY_PROGRAM_BUFFER1     		0x82
-+#define MAIN_MEMORY_PROGRAM_BUFFER2     		0x85
-+#define BUFFER1_TO_MAIN_MEMORY          		0x83
-+#define BUFFER2_TO_MAIN_MEMORY          		0x86
-+#define MAIN_MEMORY_TO_BUFFER1          		0x53
-+#define MAIN_MEMORY_TO_BUFFER2          		0x55
-+#define BUFFER1_WRITE                   		0x84
-+#define BUFFER2_WRITE                   		0x87
-+#define AUTO_PAGE_REWRITE_BUFFER1       		0x58
-+#define AUTO_PAGE_REWRITE_BUFFER2       		0x59
-+#define READ_STATUS                     		0x57
-+
-+#define MAIN_MEMORY_PAGE_READ_SPI       		0xD2
-+#define BUFFER1_READ_SPI                		0xD4
-+#define BUFFER2_READ_SPI                		0xD6
-+#define READ_STATUS_SPI                 		0xD7
-+
-+#define	FLASH_ACCESS_OFFSET	        		0x00000010
-+#define	FLASH_ADDRESS_OFFSET            		0x00000014
-+#define	FLASH_WRITE_DATA_OFFSET         		0x00000018
-+#define	FLASH_READ_DATA_OFFSET          		0x00000018
-+#define SERIAL_FLASH_CHIP1_EN            0x00010000  // 16th bit = 1
-+#define SERIAL_FLASH_CHIP0_EN            0x00000000  // 16th bit = 0
-+#define AT45DB321_PAGE_SHIFT		         0xa
-+#define AT45DB642_PAGE_SHIFT		         0xb
-+#define CONTINUOUS_MODE		         0x00008000
-+
-+#define FLASH_ACCESS_ACTION_OPCODE                      0x0000
-+#define FLASH_ACCESS_ACTION_OPCODE_DATA                 0x0100
-+#define FLASH_ACCESS_ACTION_SHIFT_ADDRESS               0x0200
-+#define FLASH_ACCESS_ACTION_SHIFT_ADDRESS_DATA          0x0300
-+#define FLASH_ACCESS_ACTION_SHIFT_ADDRESS_X_DATA          0x0400
-+#define FLASH_ACCESS_ACTION_SHIFT_ADDRESS_2X_DATA         0x0500
-+#define FLASH_ACCESS_ACTION_SHIFT_ADDRESS_3X_DATA         0x0600
-+#define FLASH_ACCESS_ACTION_SHIFT_ADDRESS_4X_DATA         0x0700
-+//#define FLASH_ACCESS_ACTION_SHIFT_ADDRESS_X_DATA        0x0600
-+//#define FLASH_ACCESS_ACTION_SHIFT_ADDRESS_4X_DATA       0x0700
-+
-+#define M25P80_PAGE_SIZE  0x100
-+#define M25P80_SECTOR_SIZE  0x10000
-+
-+
-+//#define M25P80_BULK_ERASE                                      1
-+//#define M25P80_SECTOR_ERASE                                    2
-+//#define M25P80_SECTOR_SIZE                                     0x10000
-+
-+#define M25P80_WRITE_ENABLE                  		0x06
-+#define M25P80_WRITE_DISABLE                 		0x04
-+#define M25P80_READ_STATUS                   		0x05
-+#define M25P80_WRITE_STATUS              		0x01
-+#define M25P80_READ                      		0x03
-+#define M25P80_FAST_READ                 		0x0B
-+#define M25P80_PAGE_PROGRAM              		0x02
-+#define M25P80_SECTOR_ERASE              		0xD8
-+#define M25P80_BULK_ERASE                		0xC7
-+#define FLASH_ERR_OK							0x0
-+
-+extern void address_to_page(__u32, __u16 *, __u16 *);
-+extern void main_memory_page_read(__u8, __u16, __u16, __u8 *);
-+extern void buffer_to_main_memory(__u8, __u16);
-+extern void main_memory_to_buffer(__u8, __u16);
-+extern void main_memory_page_program(__u8, __u16, __u16, __u8);
-+extern void atmel_flash_read_page(__u32, __u8 *, __u32);
-+extern void atmel_erase_page(__u8, __u16);
-+extern void atmel_read_status(__u8, __u8 *);
-+extern void atmel_flash_program_page(__u32, __u8 *, __u32);
-+extern void atmel_buffer_write(__u8, __u16, __u8);
-+extern void flash_delay(void);
-+
-+extern int m25p80_sector_erase(__u32 address, __u32 schip_en);
-+
-+#endif
---- /dev/null
-+++ b/include/asm-arm/arch-sl2312/gemini_cir.h
-@@ -0,0 +1,102 @@
-+#ifndef _ASM_ARCH_CIR_H
-+#define _ASM_ARCH_CIR_H
-+#include 
-+
-+#define VCR_KEY_POWER		0x613E609F
-+#define TV1_KEY_POWER		0x40040100
-+#define TV1_KEY_POWER_EXT	0xBCBD
-+#define RC5_KER_POWER		0x0CF3
-+
-+#define VCC_H_ACT_PER		(16-1)
-+#define VCC_L_ACT_PER		(8-1)
-+#define VCC_DATA_LEN		(32-1)
-+#define TV1_H_ACT_PER		(8-1)
-+#define TV1_L_ACT_PER		(4-1)
-+#define TV1_DATA_LEN		(48-1)
-+
-+#define VCC_BAUD		540
-+#define TV1_BAUD		430
-+#ifdef  CONFIG_SL3516_ASIC
-+#define	EXT_CLK			60
-+#else
-+#define	EXT_CLK			20
-+#endif
-+
-+#define	NEC_PROTOCOL	0x0
-+#define	RC5_PROTOCOL	0x1
-+#define VCC_PROTOCOL	0x0
-+#define TV1_PROTOCOL	0x01
-+
-+#ifndef	SL2312_CIR_BASE
-+#define	SL2312_CIR_BASE		0x4C000000
-+#endif
-+#define	CIR_BASE_ADDR		IO_ADDRESS(SL2312_CIR_BASE)
-+#define STORLINK_CIR_ID		0x00010400
-+
-+#define	CIR_IP_ID		*(volatile unsigned int *)(CIR_BASE_ADDR + 0x00)
-+#define	CIR_CTR_REG		*(volatile unsigned int *)(CIR_BASE_ADDR + 0x04)
-+#define	CIR_STATUS_REG		*(volatile unsigned int *)(CIR_BASE_ADDR + 0x08)
-+#define	CIR_RX_REG		*(volatile unsigned int *)(CIR_BASE_ADDR + 0x0C)
-+#define	CIR_RX_EXT_REG		*(volatile unsigned int *)(CIR_BASE_ADDR + 0x10)
-+#define	CIR_PWR_REG		*(volatile unsigned int *)(CIR_BASE_ADDR + 0x14)
-+#define	CIR_PWR_EXT_REG		*(volatile unsigned int *)(CIR_BASE_ADDR + 0x18)
-+#define	CIR_TX_CTR_REG		*(volatile unsigned int *)(CIR_BASE_ADDR + 0x1C)
-+#define	CIR_TX_FEQ_REG		*(volatile unsigned int *)(CIR_BASE_ADDR + 0x20)
-+#define	CIR_TX_REG		*(volatile unsigned int *)(CIR_BASE_ADDR + 0x24)
-+#define	CIR_TX_EXT_REG		*(volatile unsigned int *)(CIR_BASE_ADDR + 0x28)
-+
-+
-+#ifndef	SL2312_POWER_CTRL_BASE
-+#define	SL2312_POWER_CTRL_BASE		0x4B000000
-+#endif
-+
-+#ifndef PWR_BASE_ADDR
-+#define	PWR_BASE_ADDR		IO_ADDRESS(SL2312_POWER_CTRL_BASE)
-+#endif
-+#define	PWR_CTRL_ID		*(unsigned int*)(PWR_BASE_ADDR+0x00)
-+#define	PWR_CTRL_REG		*(unsigned int*)(PWR_BASE_ADDR+0x04)
-+#define	PWR_STATUS_REG		*(unsigned int*)(PWR_BASE_ADDR+0x08)
-+
-+
-+#define BIT(x)			(1<
-+ *
-+ * Copyright 2005 Storlink Inc.
-+ *
-+ *  This program is free software; you can redistribute  it and/or modify it
-+ *  under  the terms of  the GNU General  Public License as published by the
-+ *  Free Software Foundation;  either version 2 of the  License, or (at your
-+ *  option) any later version.
-+ *
-+ *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
-+ *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
-+ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
-+ *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
-+ *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
-+ *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
-+ *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
-+ *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
-+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
-+ *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ *
-+ *  You should have received a copy of the  GNU General Public License along
-+ *  with this program; if not, write  to the Free Software Foundation, Inc.,
-+ *  675 Mass Ave, Cambridge, MA 02139, USA.
-+ */
-+
-+#ifndef __GEMINI_GPIO_H
-+#define __GEMINI_GPIO_H
-+
-+#include 
-+
-+#define STATUS_HIGH	1
-+#define STATUS_LOW	0
-+#define DIRECT_OUT	1
-+#define DIRECT_IN	0
-+
-+#define EDGE_TRIG	0
-+#define RISING_EDGE	0
-+#define FALL_EDGE	1
-+#define SINGLE_EDGE	0
-+#define BOTH_EDGE	1
-+
-+#define LEVEL_TRIG	1
-+#define HIGH_ACTIVE	0
-+#define LOW_ACTIVE	1
-+
-+struct gemini_gpio_ioctl_data {
-+	__u32 pin;
-+	__u8 status;			// status or pin direction
-+					// 0: status low or Input
-+					// 1: status high or Output
-+
-+	/* these member are used to config GPIO interrupt parameter */
-+	__u8	use_default;		// if not sure ,set this argument 1
-+	__u8	trig_type;		// 0/1:edge/level triger ?
-+	__u8	trig_polar;		// 0/1:rising/falling high/low active ?
-+	__u8	trig_both;		// 0/1:single/both detect both ?
-+};
-+
-+#define GEMINI_GPIO_IOCTL_BASE	'Z'
-+
-+#define GEMINI_SET_GPIO_PIN_DIR		_IOW (GEMINI_GPIO_IOCTL_BASE,16, struct gemini_gpio_ioctl_data)
-+#define	GEMINI_SET_GPIO_PIN_STATUS	_IOW (GEMINI_GPIO_IOCTL_BASE,17, struct gemini_gpio_ioctl_data)
-+#define	GEMINI_GET_GPIO_PIN_STATUS	_IOWR(GEMINI_GPIO_IOCTL_BASE,18, struct gemini_gpio_ioctl_data)
-+#define GEMINI_WAIT_GPIO_PIN_INT	_IOWR(GEMINI_GPIO_IOCTL_BASE,19, struct gemini_gpio_ioctl_data)
-+
-+
-+extern void init_gpio_int(__u32 pin,__u8 trig_type,__u8 trig_polar,__u8 trig_both);
-+extern int request_gpio_irq(int bit,void (*handler)(int),char level,char high,char both);
-+extern int free_gpio_irq(int bit);
-+#endif
---- /dev/null
-+++ b/include/asm-arm/arch-sl2312/gemini_i2s.h
-@@ -0,0 +1,169 @@
-+#ifndef __GEMINI_I2S_H__
-+#define __GEMINI_I2S_H__
-+#include 
-+#include 
-+#include 
-+
-+typedef __u16 UINT16;
-+typedef __u32 UINT32;
-+typedef __u8 UINT8;
-+typedef __u8 BOOL;
-+
-+/***************************************/
-+/* define GPIO module base address     */
-+/***************************************/
-+#define DMA_CONTROL_PHY_BASE  (IO_ADDRESS(SL2312_GENERAL_DMA_BASE))
-+#define DMA_CONTROL_SSP_BASE  (IO_ADDRESS(SL2312_SSP_CTRL_BASE))
-+#define SSP_INT				IRQ_SSP
-+#define GPIO_BASE_ADDR      (IO_ADDRESS(SL2312_GPIO_BASE))
-+#define GPIO_BASE_ADDR1      (IO_ADDRESS(SL2312_GPIO_BASE1))
-+#define GLOBAL_BASE      (IO_ADDRESS(SL2312_GLOBAL_BASE))
-+
-+/* define read/write register utility */
-+#define READ_SSP_REG(offset)			(__raw_readl(offset+DMA_CONTROL_SSP_BASE))
-+#define WRITE_SSP_REG(offset,val) 	(__raw_writel(val,offset+DMA_CONTROL_SSP_BASE))
-+
-+#define READ_GPIO_REG(offset)			(__raw_readl(offset+GPIO_BASE_ADDR))
-+#define WRITE_GPIO_REG(offset,val) 	(__raw_writel(val,offset+GPIO_BASE_ADDR))
-+
-+#define READ_GPIO1_REG(offset)			(__raw_readl(offset+GPIO_BASE_ADDR1))
-+#define WRITE_GPIO1_REG(offset,val) 	(__raw_writel(val,offset+GPIO_BASE_ADDR1))
-+
-+#define READ_DMA_REG(offset)			(__raw_readl(offset+DMA_CONTROL_PHY_BASE))
-+#define WRITE_DMA_REG(offset,val) 	(__raw_writel(val,offset+DMA_CONTROL_PHY_BASE))
-+
-+#define READ_GLOBAL_REG(offset)			(__raw_readl(offset+GLOBAL_BASE))
-+#define WRITE_GLOBAL_REG(offset,val) 	(__raw_writel(val,offset+GLOBAL_BASE))
-+
-+#define SSP_GPIO_INT       	IRQ_GPIO
-+
-+#ifndef CONFIG_SL3516_ASIC
-+#define SSP_GPIO_INT_BIT    0x00000400				//GPIO[10] : SLIC interrupt pin
-+
-+#define GPIO_EECK	     0x00000040         /*   SCK: GPIO[06]   */
-+#define GPIO_EECS	     0x00000080			/*   SCS: GPIO[07]   */
-+#define GPIO_MISO	     0x00000200         /*   SDO: GPIO[09]   receive from 6996*/
-+#define GPIO_MOSI	     0x00000100         /*   SDI: GPIO[08]   send to 6996*/
-+#define GPIO_MISO_BIT	 9
-+#else
-+#define SSP_GPIO_INT_BIT    0x00000001				//GPIO[0] : SLIC interrupt pin
-+
-+//#if 0
-+//#define GPIO_EECK	     0x80000000         /*   SCK: GPIO1[31]   */
-+//#define GPIO_EECS	     0x40000000			/*   SCS: GPIO1[30]   */
-+//#define GPIO_MISO	     0x20000000         /*   SDO: GPIO1[29]   receive from 6996*/
-+//#define GPIO_MOSI	     0x10000000         /*   SDI: GPIO1[28]   send to 6996*/
-+//#define GPIO_MISO_BIT	29
-+//#else
-+//#define GPIO_EECK	     0x00000100         /*   SCK: GPIO1[08]   */
-+//#define GPIO_EECS	     0x08000000			/*   SCS: GPIO1[27]   */
-+//#define GPIO_MISO	     0x00000080         /*   SDO: GPIO1[07]   receive from 6996*/
-+//#define GPIO_MOSI	     0x00000200         /*   SDI: GPIO1[09]   send to 6996*/
-+//#define GPIO_MISO_BIT	7
-+//#endif
-+#endif
-+
-+
-+enum GPIO_REG
-+{
-+	GPIO_DATA_OUT   	= 0x00,
-+	GPIO_DATA_IN    	= 0x04,
-+	GPIO_PIN_DIR    	= 0x08,
-+	GPIO_BY_PASS    	= 0x0c,
-+	GPIO_DATA_SET   	= 0x10,
-+	GPIO_DATA_CLEAR 	= 0x14,
-+	GPIO_INT_ENABLE     = 0x20,
-+	GPIO_INT_RAWSTATE   = 0x24,
-+	GPIO_INT_MASKSTATE  = 0x28,
-+	GPIO_INT_MASK       = 0x2C,
-+	GPIO_INT_CLEAR      = 0x30,
-+	GPIO_INT_TRIGGER    = 0x34,
-+	GPIO_INT_BOTH       = 0x38,
-+	GPIO_INT_POLARITY   = 0x3C
-+};
-+
-+typedef struct
-+{
-+	UINT32 src_addr;
-+	UINT32 dst_addr;
-+	UINT32 llp;
-+	UINT32 ctrl_size;
-+	UINT32 owner;
-+}DMA_LLP_t;
-+
-+typedef struct
-+{
-+	UINT32 owner;
-+	UINT32 src_addr;
-+	UINT32 ctrl_size;
-+}IOCTL_LLP_t;
-+
-+typedef unsigned char byte;
-+typedef unsigned short word;
-+typedef unsigned long dword;
-+
-+/* DMA Registers */
-+#define	DMA_INT 		   		0x00000000
-+#define	DMA_INT_TC 		   		0x00000004
-+#define	DMA_CFG 		   		0x00000024
-+#define	DMA_INT_TC_CLR				0x00000008
-+#define	DMA_TC						0x00000014
-+#define	DMA_CSR						0x00000024
-+#define	DMA_SYNC					0x00000028
-+
-+#define	DMA_CH2_CSR    				0x00000140
-+#define	DMA_CH2_CFG    				0x00000144
-+#define	DMA_CH2_SRC_ADDR    		0x00000148
-+#define	DMA_CH2_DST_ADDR    		0x0000014c
-+#define	DMA_CH2_LLP    				0x00000150
-+#define	DMA_CH2_SIZE    			0x00000154
-+
-+#define	DMA_CH3_CSR    				0x00000160
-+#define	DMA_CH3_CFG    				0x00000164
-+#define	DMA_CH3_SRC_ADDR    		0x00000168
-+#define	DMA_CH3_DST_ADDR    		0x0000016c
-+#define	DMA_CH3_LLP    				0x00000170
-+#define	DMA_CH3_SIZE    			0x00000174
-+
-+#define    SSP_DEVICE_ID   			0x00
-+#define    SSP_CTRL_STATUS 			0x04
-+#define	   SSP_FRAME_CTRL           0x08
-+#define    SSP_BAUD_RATE            0x0c
-+#define    SSP_FRAME_CTRL2          0x10
-+#define    SSP_FIFO_CTRL            0x14
-+#define    SSP_TX_SLOT_VALID0       0x18
-+#define    SSP_TX_SLOT_VALID1       0x1c
-+#define    SSP_TX_SLOT_VALID2       0x20
-+#define    SSP_TX_SLOT_VALID3       0x24
-+#define    SSP_RX_SLOT_VALID0       0x28
-+#define    SSP_RX_SLOT_VALID1       0x2c
-+#define    SSP_RX_SLOT_VALID2       0x30
-+#define    SSP_RX_SLOT_VALID3       0x34
-+#define    SSP_SLOT_SIZE0           0x38
-+#define    SSP_SLOT_SIZE1           0x3c
-+#define    SSP_SLOT_SIZE2           0x40
-+#define    SSP_SLOT_SIZE3           0x44
-+#define    SSP_READ_PORT            0x48
-+#define    SSP_WRITE_PORT           0x4c
-+
-+
-+
-+#define SSP_I2S_INIT_BUF			_IO  ('q', 0x00)
-+#define SSP_I2S_STOP_DMA			_IO  ('q', 0x01)
-+#define SSP_I2S_FILE_LEN			_IOW  ('q', 0x2, int)
-+/*
-+#define SSP_GET_HOOK_STATUS			_IOR  ('q', 0xC0, int)
-+#define SSP_GET_LINEFEED			_IOR  ('q', 0xC1, int)
-+#define SSP_SET_LINEFEED			_IOW  ('q', 0xC2, int)
-+#define SSP_GET_REG                 _IOWR ('q', 0xC3, struct Ssp_reg *)
-+#define SSP_SET_REG                 _IOWR ('q', 0xC4, struct Ssp_reg *)
-+#define SSP_GEN_OFFHOOK_TONE		_IO   ('q', 0xC5)
-+#define SSP_GEN_BUSY_TONE			_IO   ('q', 0xC6)
-+#define SSP_GEN_RINGBACK_TONE		_IO   ('q', 0xC7)
-+#define SSP_GEN_CONGESTION_TONE		_IO   ('q', 0xC8)
-+#define SSP_DISABLE_DIALTONE		_IO   ('q', 0xC9)
-+#define SSP_PHONE_RING_START		_IO   ('q', 0xCA)
-+*/
-+
-+
-+#endif //__GEMINI_I2S_H__
---- /dev/null
-+++ b/include/asm-arm/arch-sl2312/gemini_ssp.h
-@@ -0,0 +1,263 @@
-+/******************************************************************************
-+ *    gemini_ssp.h
-+ *
-+ *
-+ *****************************************************************************/
-+
-+#include 
-+#include 
-+#include 
-+#include 
-+//#include "proslic.h"
-+
-+typedef __u16 UINT16;
-+typedef __u32 UINT32;
-+typedef __u8 UINT8;
-+typedef __u8 BOOL;
-+
-+#define TRUE 1
-+#define FALSE 0
-+
-+/***************************************/
-+/* define GPIO module base address     */
-+/***************************************/
-+#define DMA_CONTROL_PHY_BASE  (IO_ADDRESS(SL2312_GENERAL_DMA_BASE))
-+#define DMA_CONTROL_SSP_BASE  (IO_ADDRESS(SL2312_SSP_CTRL_BASE))
-+#define SSP_INT				IRQ_SSP
-+#define GPIO_BASE_ADDR      (IO_ADDRESS(SL2312_GPIO_BASE))
-+#define GPIO_BASE_ADDR1      (IO_ADDRESS(SL2312_GPIO_BASE1))
-+#define GLOBAL_BASE      (IO_ADDRESS(SL2312_GLOBAL_BASE))
-+
-+/* define read/write register utility */
-+#define READ_SSP_REG(offset)			(__raw_readl(offset+DMA_CONTROL_SSP_BASE))
-+#define WRITE_SSP_REG(offset,val) 	(__raw_writel(val,offset+DMA_CONTROL_SSP_BASE))
-+
-+#define READ_GPIO_REG(offset)			(__raw_readl(offset+GPIO_BASE_ADDR))
-+#define WRITE_GPIO_REG(offset,val) 	(__raw_writel(val,offset+GPIO_BASE_ADDR))
-+
-+#define READ_GPIO1_REG(offset)			(__raw_readl(offset+GPIO_BASE_ADDR1))
-+#define WRITE_GPIO1_REG(offset,val) 	(__raw_writel(val,offset+GPIO_BASE_ADDR1))
-+
-+#define READ_DMA_REG(offset)			(__raw_readl(offset+DMA_CONTROL_PHY_BASE))
-+#define WRITE_DMA_REG(offset,val) 	(__raw_writel(val,offset+DMA_CONTROL_PHY_BASE))
-+
-+#define READ_GLOBAL_REG(offset)			(__raw_readl(offset+GLOBAL_BASE))
-+#define WRITE_GLOBAL_REG(offset,val) 	(__raw_writel(val,offset+GLOBAL_BASE))
-+
-+
-+#define SSP_GPIO_INT       	IRQ_GPIO
-+
-+#ifndef CONFIG_SL3516_ASIC
-+#define SSP_GPIO_INT_BIT    0x00000400				//GPIO[10] : SLIC interrupt pin
-+
-+#define GPIO_EECK	     0x00000040         /*   SCK: GPIO[06]   */
-+#define GPIO_EECS	     0x00000080			/*   SCS: GPIO[07]   */
-+#define GPIO_MISO	     0x00000200         /*   SDO: GPIO[09]   receive from 6996*/
-+#define GPIO_MOSI	     0x00000100         /*   SDI: GPIO[08]   send to 6996*/
-+#define GPIO_MISO_BIT	 9
-+#else
-+#define SSP_GPIO_INT_BIT    0x00000001				//GPIO[0] : SLIC interrupt pin
-+
-+//#if 0
-+//#define GPIO_EECK	     0x80000000         /*   SCK: GPIO1[31]   */
-+//#define GPIO_EECS	     0x40000000			/*   SCS: GPIO1[30]   */
-+//#define GPIO_MISO	     0x20000000         /*   SDO: GPIO1[29]   receive from 6996*/
-+//#define GPIO_MOSI	     0x10000000         /*   SDI: GPIO1[28]   send to 6996*/
-+//#define GPIO_MISO_BIT	29
-+//#else
-+//#define GPIO_EECK	     0x00000100         /*   SCK: GPIO1[08]   */
-+//#define GPIO_EECS	     0x08000000			/*   SCS: GPIO1[27]   */
-+//#define GPIO_MISO	     0x00000080         /*   SDO: GPIO1[07]   receive from 6996*/
-+//#define GPIO_MOSI	     0x00000200         /*   SDI: GPIO1[09]   send to 6996*/
-+//#define GPIO_MISO_BIT	7
-+//#endif
-+#endif
-+
-+
-+enum GPIO_REG
-+{
-+	GPIO_DATA_OUT   	= 0x00,
-+	GPIO_DATA_IN    	= 0x04,
-+	GPIO_PIN_DIR    	= 0x08,
-+	GPIO_BY_PASS    	= 0x0c,
-+	GPIO_DATA_SET   	= 0x10,
-+	GPIO_DATA_CLEAR 	= 0x14,
-+	GPIO_INT_ENABLE     = 0x20,
-+	GPIO_INT_RAWSTATE   = 0x24,
-+	GPIO_INT_MASKSTATE  = 0x28,
-+	GPIO_INT_MASK       = 0x2C,
-+	GPIO_INT_CLEAR      = 0x30,
-+	GPIO_INT_TRIGGER    = 0x34,
-+	GPIO_INT_BOTH       = 0x38,
-+	GPIO_INT_POLARITY   = 0x3C
-+};
-+
-+
-+#define SPI_ADD_LEN	     7			// bits of Address
-+#define SPI_DAT_LEN	     8			// bits of Data
-+
-+
-+
-+//#ifdef MIDWAY_DIAG
-+#define	DAISY_MODE	1
-+#if (DAISY_MODE==1)
-+#define NUMBER_OF_CHAN	2
-+#else
-+#define NUMBER_OF_CHAN	1
-+#endif
-+#define LLP_SIZE   8
-+#define SBUF_SIZE  512 //0xff0 //2560
-+#define DBUF_SIZE  SBUF_SIZE*NUMBER_OF_CHAN //0xff0 //2560
-+#define TBUF_SIZE  (LLP_SIZE)*DBUF_SIZE
-+#define DESC_NUM   1
-+#define DTMF_NUM   20
-+
-+/* define owner bit of SSP */
-+//data into SSP and transfer to AP==> SSP_Rx
-+//data out of SSP and transfer to SLIC==> SSP_Tx
-+#define CPU		0
-+#define DMA		1
-+
-+#define DMA_DEMO   0
-+#define DMA_NDEMO  1
-+//#define DMA_NONE   2
-+
-+enum exceptions {
-+	PROSLICiNSANE,
-+	TIMEoUTpOWERuP,
-+	TIMEoUTpOWERdOWN,
-+	POWERlEAK,
-+	TIPoRrINGgROUNDsHORT,
-+	POWERaLARMQ1,
-+	POWERaLARMQ2,
-+	POWERaLARMQ3,
-+	POWERaLARMQ4,
-+	POWERaLARMQ5,
-+	OWERaLARMQ6,
-+	CM_CAL_ERR
-+};
-+
-+typedef struct
-+{
-+	UINT32 src_addr;
-+	UINT32 dst_addr;
-+	UINT32 llp;
-+	UINT32 ctrl_size;
-+}DMA_LLP_t;
-+
-+typedef struct {
-+	unsigned int own ;
-+	char  *tbuf;
-+	//UINT32 *LinkAddrT;
-+	DMA_LLP_t LLPT[LLP_SIZE];
-+}DMA_Tx_t;
-+
-+typedef struct {
-+	unsigned int own ;
-+	char  *rbuf;
-+	//UINT32 *LinkAddrR;
-+	DMA_LLP_t LLPR[LLP_SIZE];
-+}DMA_Rx_t;
-+
-+//typedef struct {
-+//	//UINT32 init_stat;
-+//	struct chipStruct chipData ; /* Represents a proslics state, cached information, and timers */
-+//	struct phone_device p;
-+//
-+//
-+//}SSP_SLIC;
-+
-+
-+
-+/* DMA Registers */
-+#define	DMA_INT 		   		0x00000000
-+#define	DMA_INT_TC 		   		0x00000004
-+#define	DMA_CFG 		   		0x00000024
-+#define	DMA_INT_TC_CLR				0x00000008
-+#define	DMA_TC						0x00000014
-+#define	DMA_CSR						0x00000024
-+#define	DMA_SYNC					0x00000028
-+
-+#define	DMA_CH2_CSR    				0x00000140
-+#define	DMA_CH2_CFG    				0x00000144
-+#define	DMA_CH2_SRC_ADDR    		0x00000148
-+#define	DMA_CH2_DST_ADDR    		0x0000014c
-+#define	DMA_CH2_LLP    				0x00000150
-+#define	DMA_CH2_SIZE    			0x00000154
-+
-+#define	DMA_CH3_CSR    				0x00000160
-+#define	DMA_CH3_CFG    				0x00000164
-+#define	DMA_CH3_SRC_ADDR    		0x00000168
-+#define	DMA_CH3_DST_ADDR    		0x0000016c
-+#define	DMA_CH3_LLP    				0x00000170
-+#define	DMA_CH3_SIZE    			0x00000174
-+
-+#define    SSP_DEVICE_ID   			0x00
-+#define    SSP_CTRL_STATUS 			0x04
-+#define	   SSP_FRAME_CTRL           0x08
-+#define    SSP_BAUD_RATE            0x0c
-+#define    SSP_FRAME_CTRL2          0x10
-+#define    SSP_FIFO_CTRL            0x14
-+#define    SSP_TX_SLOT_VALID0       0x18
-+#define    SSP_TX_SLOT_VALID1       0x1c
-+#define    SSP_TX_SLOT_VALID2       0x20
-+#define    SSP_TX_SLOT_VALID3       0x24
-+#define    SSP_RX_SLOT_VALID0       0x28
-+#define    SSP_RX_SLOT_VALID1       0x2c
-+#define    SSP_RX_SLOT_VALID2       0x30
-+#define    SSP_RX_SLOT_VALID3       0x34
-+#define    SSP_SLOT_SIZE0           0x38
-+#define    SSP_SLOT_SIZE1           0x3c
-+#define    SSP_SLOT_SIZE2           0x40
-+#define    SSP_SLOT_SIZE3           0x44
-+#define    SSP_READ_PORT            0x48
-+#define    SSP_WRITE_PORT           0x4c
-+
-+
-+void printFreq_Revision(int num);
-+void SLIC_SPI_write(int num, UINT8 ,UINT8);
-+UINT8 SLIC_SPI_read(int num, UINT8);
-+void SLIC_SPI_write_bit(char);
-+void SLIC_SPI_ind_write(int num, UINT8, UINT16);
-+UINT16 SLIC_SPI_ind_read(int num, UINT8);
-+void SLIC_SPI_CS_enable(UINT8);
-+unsigned int SLIC_SPI_read_bit(void);
-+void SLIC_SPI_pre_st(void);
-+UINT32 ssp_init(void);
-+UINT16 SLIC_SPI_get_identifier(int num);
-+int selfTest(int num);
-+void exception (int num, enum exceptions e);
-+int SLIC_init(int num);
-+UINT8 version(int num);
-+UINT8 chipType (int num);
-+void SLIC_init_ind_reg_set(int num);
-+UINT8 powerUp(int num);
-+UINT8 powerLeakTest(int num);
-+void SLIC_init_reg_set(int num);
-+int calibrate(int num);
-+void goActive(int num);
-+void clearInterrupts(int num);
-+void setState(int num, int);
-+UINT8 loopStatus(int num);
-+int verifyIndirectRegisters(int num);
-+int verifyIndirectReg(int num, UINT8 , UINT16);
-+void sendProSLICID(int num);
-+void disableOscillators(int num);
-+UINT8 checkSum(int num, char * string );
-+void fskInitialization (int num);
-+void fskByte(int num, UINT8 c);
-+void waitForInterrupt (int num);
-+//void findNumber(void);
-+UINT8 dtmfAction(int num);
-+UINT8 digit(int num);
-+void interrupt_init(void);
-+//void gemini_slic_isr (int );
-+int groundShort(int num);
-+void clearAlarmBits(int num);
-+void stopRinging(int num);
-+void activateRinging(int num);
-+void initializeLoopDebounceReg(int num);
-+void busyJapan(int num) ;
-+void ringBackJapan(int num) ;
-+void stateMachine(int num);
-+
---- /dev/null
-+++ b/include/asm-arm/arch-sl2312/hardware.h
-@@ -0,0 +1,47 @@
-+/*
-+ *  linux/include/asm-arm/arch-epxa10/hardware.h
-+ *
-+ *  This file contains the hardware definitions of the Integrator.
-+ *
-+ *  Copyright (C) 1999 ARM Limited.
-+ *  Copyright (C) 2001 Altera Corporation
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
-+ */
-+#ifndef __ASM_ARCH_HARDWARE_H
-+#define __ASM_ARCH_HARDWARE_H
-+
-+#include 
-+
-+#define pcibios_assign_all_busses()	1
-+
-+/*
-+ * Where in virtual memory the IO devices (timers, system controllers
-+ * and so on)
-+ *
-+ * macro to get at IO space when running virtually
-+*/
-+
-+#define IO_ADDRESS(x)      (((x&0xfff00000)>>4)|(x & 0x000fffff)|0xF0000000)
-+#define FLASH_VBASE         0xFE000000
-+#define FLASH_SIZE 0x1000000// 8M
-+#define FLASH_START         SL2312_FLASH_BASE
-+#define FLASH_VADDR(x)      ((x & 0x00ffffff)|0xFE000000)       // flash virtual address
-+
-+#define PCIBIOS_MIN_IO					0x100		// 0x000-0x100 AHB reg and PCI config, data
-+#define PCIBIOS_MIN_MEM					0
-+
-+#endif
-+
---- /dev/null
-+++ b/include/asm-arm/arch-sl2312/int_ctrl.h
-@@ -0,0 +1,171 @@
-+/*
-+ *
-+ *  This file contains the register definitions for the Excalibur
-+ *  Timer TIMER00.
-+ *
-+ *  Copyright (C) 2001 Altera Corporation
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
-+ */
-+
-+#ifndef __INT_CTRL_H
-+#define __INT_CTRL_H
-+
-+#define PCI_IRQ_OFFSET			  64    /* PCI start IRQ number */
-+#define FIQ_OFFSET                32
-+
-+#define IRQ_SOURCE(base_addr)   (INT_CTRL_TYPE(base_addr  + 0x00))
-+#define IRQ_MASK(base_addr)     (INT_CTRL_TYPE (base_addr  + 0x04 ))
-+#define IRQ_CLEAR(base_addr)    (INT_CTRL_TYPE (base_addr  + 0x08 ))
-+#define IRQ_TMODE(base_addr)    (INT_CTRL_TYPE (base_addr  + 0x0C ))
-+#define IRQ_TLEVEL(base_addr)    (INT_CTRL_TYPE (base_addr  + 0x10 ))
-+#define IRQ_STATUS(base_addr)   (INT_CTRL_TYPE (base_addr  + 0x14 ))
-+#define FIQ_SOURCE(base_addr)   (INT_CTRL_TYPE (base_addr  + 0x20 ))
-+#define FIQ_MASK(base_addr)     (INT_CTRL_TYPE (base_addr  + 0x24 ))
-+#define FIQ_CLEAR(base_addr)    (INT_CTRL_TYPE (base_addr  + 0x28 ))
-+#define FIQ_TMODE(base_addr)    (INT_CTRL_TYPE (base_addr  + 0x2C ))
-+#define FIQ_LEVEL(base_addr)    (INT_CTRL_TYPE (base_addr  + 0x30 ))
-+#define FIQ_STATUS(base_addr)   (INT_CTRL_TYPE (base_addr  + 0x34 ))
-+
-+#ifdef CONFIG_SL3516_ASIC
-+#define	IRQ_SERIRQ0_OFFSET                 	30
-+#define	IRQ_PCID_OFFSET	                 	29
-+#define	IRQ_PCIC_OFFSET	                 	28
-+#define	IRQ_PCIB_OFFSET	                 	27
-+#define IRQ_PWR_OFFSET				    	26
-+#define IRQ_CIR_OFFSET						25
-+#define	IRQ_GPIO2_OFFSET                   	24
-+#define	IRQ_GPIO1_OFFSET                   	23
-+#define	IRQ_GPIO_OFFSET	                	22
-+#define	IRQ_SSP_OFFSET                     	21
-+#define IRQ_LPC_OFFSET                      20
-+#define IRQ_LCD_OFFSET                      19
-+#define	IRQ_UART_OFFSET                		18
-+#define	IRQ_RTC_OFFSET             			17
-+#define	IRQ_TIMER3_OFFSET                  	16
-+#define	IRQ_TIMER2_OFFSET                  	15
-+#define	IRQ_TIMER1_OFFSET                  	14
-+#define IRQ_FLASH_OFFSET					12
-+#define	IRQ_USB1_OFFSET                    	11
-+#define IRQ_USB0_OFFSET						10
-+#define	IRQ_DMA_OFFSET                     	9
-+#define	IRQ_PCI_OFFSET                 		8
-+#define	IRQ_IPSEC_OFFSET            		7
-+#define	IRQ_RAID_OFFSET                     6
-+#define	IRQ_IDE1_OFFSET                    	5
-+#define	IRQ_IDE0_OFFSET                		4
-+#define	IRQ_WATCHDOG_OFFSET                 3
-+#define	IRQ_GMAC1_OFFSET                    2
-+#define IRQ_GMAC0_OFFSET					1
-+#define	IRQ_CPU0_IP_IRQ_OFFSET              0
-+
-+#define	IRQ_SERIRQ0_MASK                 	(1<<30)
-+#define IRQ_PCID_MASK				    	(1<<29)
-+#define IRQ_PCIC_MASK				    	(1<<28)
-+#define IRQ_PCIB_MASK				    	(1<<27)
-+#define IRQ_PWR_MASK				    	(1<<26)
-+#define IRQ_CIR_MASK						(1<<25)
-+#define	IRQ_GPIO2_MASK                   	(1<<24)
-+#define	IRQ_GPIO1_MASK                    	(1<<23)
-+#define	IRQ_GPIO_MASK	                    (1<<22)
-+#define	IRQ_SSP_MASK                        (1<<21)
-+#define IRQ_LPC_MASK                        (1<<20)
-+#define IRQ_LCD_MASK                        (1<<19)
-+#define	IRQ_UART_MASK                	    (1<<18)
-+#define	IRQ_RTC_MASK             		    (1<<17)
-+#define	IRQ_TIMER3_MASK                     (1<<16)
-+#define	IRQ_TIMER2_MASK                     (1<<15)
-+#define	IRQ_TIMER1_MASK                     (1<<14)
-+#define IRQ_FLASH_MASK					    (1<<12)
-+#define	IRQ_USB1_MASK                       (1<<11)
-+#define IRQ_USB0_MASK					    (1<<10)
-+#define	IRQ_DMA_MASK                        (1<< 9)
-+#define	IRQ_PCI_MASK                 	    (1<< 8)
-+#define	IRQ_IPSEC_MASK            		    (1<< 7)
-+#define	IRQ_RAID_MASK                       (1<< 6)
-+#define	IRQ_IDE1_MASK                       (1<< 5)
-+#define	IRQ_IDE0_MASK                 	    (1<< 4)
-+#define	IRQ_WATCHDOG_MASK                   (1<< 3)
-+#define	IRQ_GMAC1_MASK                      (1<< 2)
-+#define IRQ_GMAC0_MASK					    (1<< 1)
-+#define	IRQ_CPU0_IP_IRQ_MASK                (1<< 0)
-+#else
-+#define	IRQ_SERIRQ0_OFFSET                 	30
-+#define	IRQ_PCID_OFFSET	                 	29
-+#define	IRQ_PCIC_OFFSET	                 	28
-+#define	IRQ_PCIB_OFFSET	                 	27
-+#define IRQ_PWR_OFFSET				    	26
-+#define IRQ_CIR_OFFSET						25
-+#define	IRQ_GPIO2_OFFSET                   	24
-+#define	IRQ_GPIO1_OFFSET                   	23
-+#define	IRQ_GPIO_OFFSET	                	22
-+#define	IRQ_SSP_OFFSET                     	21
-+#define IRQ_LPC_OFFSET                      20
-+#define IRQ_LCD_OFFSET                      19
-+#define	IRQ_UART_OFFSET                		18
-+#define	IRQ_RTC_OFFSET             			17
-+#define	IRQ_TIMER3_OFFSET                  	16
-+#define	IRQ_TIMER2_OFFSET                  	15
-+#define	IRQ_TIMER1_OFFSET                  	14
-+#define IRQ_FLASH_OFFSET					12
-+#define	IRQ_USB1_OFFSET                    	11
-+#define IRQ_USB0_OFFSET						10
-+#define	IRQ_DMA_OFFSET                     	9
-+#define	IRQ_PCI_OFFSET                 		8
-+#define	IRQ_IPSEC_OFFSET            		7
-+#define	IRQ_RAID_OFFSET                     6
-+#define	IRQ_IDE1_OFFSET                    	5
-+#define	IRQ_IDE0_OFFSET                		4
-+#define	IRQ_WATCHDOG_OFFSET                 3
-+#define	IRQ_GMAC1_OFFSET                    2
-+#define IRQ_GMAC0_OFFSET					1
-+#define	IRQ_CPU0_IP_IRQ_OFFSET              0
-+
-+#define	IRQ_SERIRQ0_MASK                 	(1<<30)
-+#define IRQ_PCID_MASK				    	(1<<29)
-+#define IRQ_PCIC_MASK				    	(1<<28)
-+#define IRQ_PCIB_MASK				    	(1<<27)
-+#define IRQ_PWR_MASK				    	(1<<26)
-+#define IRQ_CIR_MASK						(1<<25)
-+#define	IRQ_GPIO2_MASK                   	(1<<24)
-+#define	IRQ_GPIO1_MASK                    	(1<<23)
-+#define	IRQ_GPIO_MASK	                    (1<<22)
-+#define	IRQ_SSP_MASK                        (1<<21)
-+#define IRQ_LPC_MASK                        (1<<20)
-+#define IRQ_LCD_MASK                        (1<<19)
-+#define	IRQ_UART_MASK                	    (1<<18)
-+#define	IRQ_RTC_MASK             		    (1<<17)
-+#define	IRQ_TIMER3_MASK                     (1<<16)
-+#define	IRQ_TIMER2_MASK                     (1<<15)
-+#define	IRQ_TIMER1_MASK                     (1<<14)
-+#define IRQ_FLASH_MASK					    (1<<12)
-+#define	IRQ_USB1_MASK                       (1<<11)
-+#define IRQ_USB0_MASK					    (1<<10)
-+#define	IRQ_DMA_MASK                        (1<< 9)
-+#define	IRQ_PCI_MASK                 	    (1<< 8)
-+#define	IRQ_IPSEC_MASK            		    (1<< 7)
-+#define	IRQ_RAID_MASK                       (1<< 6)
-+#define	IRQ_IDE1_MASK                       (1<< 5)
-+#define	IRQ_IDE0_MASK                 	    (1<< 4)
-+#define	IRQ_WATCHDOG_MASK                   (1<< 3)
-+#define	IRQ_GMAC1_MASK                      (1<< 2)
-+#define IRQ_GMAC0_MASK					    (1<< 1)
-+#define	IRQ_CPU0_IP_IRQ_MASK                (1<< 0)
-+#endif
-+
-+
-+#endif /* __INT_CTRL_H */
-+
-+
---- /dev/null
-+++ b/include/asm-arm/arch-sl2312/io.h
-@@ -0,0 +1,50 @@
-+/*
-+ *  linux/include/asm-arm/arch-epxa10db/io.h
-+ *
-+ *  Copyright (C) 1999 ARM Limited
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
-+ */
-+#ifndef __ASM_ARM_ARCH_IO_H
-+#define __ASM_ARM_ARCH_IO_H
-+
-+#define IO_SPACE_LIMIT 0xffffffff
-+
-+
-+/*
-+ * Generic virtual read/write
-+ */
-+/*
-+#define __arch_getw(a)		(*(volatile unsigned short *)(a))
-+#define __arch_putw(v,a)	(*(volatile unsigned short *)(a) = (v))
-+*/
-+/*#define outsw   __arch_writesw
-+#define outsl   __arch_writesl
-+#define outsb   __arch_writesb
-+#define insb    __arch_readsb
-+#define insw    __arch_readsw
-+#define insl    __arch_readsl*/
-+
-+#define __io(a)			(a)
-+#define __mem_pci(a)            (a)
-+/*
-+#define __arch_getw(a)			(*(volatile unsigned short  *)(a))
-+#define __arch_putw(v,a)		(*(volatile unsigned short *)(a) = (v))
-+*/
-+#define iomem_valid_addr(off,size) (1)
-+#define iomem_to_phys(off) (off)
-+
-+
-+#endif
---- /dev/null
-+++ b/include/asm-arm/arch-sl2312/ipi.h
-@@ -0,0 +1,189 @@
-+/*
-+ *  linux/include/asm-arm/arch-sl2312/system.h
-+ *
-+ *  Copyright (C) 1999 ARM Limited
-+ *  Copyright (C) 2000 Deep Blue Solutions Ltd
-+ *  Copyright (C) 2001 Altera Corporation
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
-+ */
-+#ifndef __ASM_ARCH_IPI_H
-+#define __ASM_ARCH_IPI_H
-+#include 
-+
-+//#define spin_lock(x)	spin_lock_dt(x)
-+//#define spin_unlock(x)	spin_unlock_dt(x)
-+
-+#define SWAP_OFFSET							0x400000
-+#define SWAP_SIZE							0x400000
-+
-+#define SHARE_MEM_ADDR						0x2000000
-+#define SHARE_MEM_SIZE						1024*1024
-+
-+
-+//--> Add by jason for IPI testing
-+// memory layout for maste & slave bin
-+#define MASTERTEXT      0x8000
-+#define SLAVETEXT		0x108000
-+#define SHARESIZE		0x4000
-+#define SHAREADDR		SHARE_MEM_ADDR // starting 8M
-+
-+// CPU1 reset release
-+#define GLOBAL_BASE		IO_ADDRESS(0x40000000)
-+#define GLOBAL_SOFTRESET	(GLOBAL_BASE + 0x0C)
-+#define CPU1_RESET_BIT_MASK     0x40000000
-+
-+// IPI , need to redefine the folliwing,  bug
-+#define CPU0_STATUS			(GLOBAL_BASE + 0x0038)
-+#define CPU1_STATUS			(GLOBAL_BASE + 0x003C)
-+#define CPU_IPI_BIT_MASK    0x80000000
-+
-+/* Your basic SMP spinlocks, allowing only a single CPU anywhere
-+*/
-+typedef struct {
-+       volatile unsigned int lock;
-+} spinlock_dt;
-+
-+
-+#define         MASTER_BIT      0x01
-+#define         SLAVE_BIT       0x02
-+#define         HEART_BIT       0x04
-+#define         IPI0_IRQ_BIT    0x08
-+#define         IPI0_FIQ_BIT    0x10
-+#define         IPI1_IRQ_BIT    0x20
-+#define         IPI1_FIQ_BIT    0x40
-+
-+#define IRQ     0
-+#define FIQ     1
-+#define DONE    0xff
-+
-+#define         CPU0            0x0
-+#define         CPU1            0x1
-+
-+#define         MAXCHAR         128*1024
-+typedef struct  {
-+       int flag;
-+       int uart_flag;
-+       int cnt;
-+       spinlock_dt lk;
-+       char message[MAXCHAR];
-+}s_mailbox;
-+
-+// JScale proj definition
-+typedef struct {
-+	u16		type;				// message Type
-+	u16		length;				// message length, including message header
-+} IPC_MSG_HDR_T;
-+
-+typedef struct{
-+	IPC_MSG_HDR_T	hdr;
-+	u32				input_location;
-+	u32				input_size;
-+	u32				output_location;
-+	u16  			ScaledImageWidth;
-+	u16  			ScaledImageHeight;
-+	u8  			ScaledImageQuality;
-+	u8  			MaintainResultionRatio;
-+	u8  			TwoStepScaling;
-+	u8  			InputFormat;
-+	u8				verbose;
-+	u8				reserved[3];
-+} JSCALE_REQ_T;
-+
-+typedef struct{
-+	IPC_MSG_HDR_T	hdr;
-+	u32				status;
-+	u32				code;
-+	u32				output_size;
-+} JSCALE_RSP_T;
-+
-+#define IPC_JSCALE_REQ_MSG			0	// JScale request from CPU-0 to CPU-1
-+#define IPC_JSCALE_RSP_MSG			1	// JScale response from CPU-1 to CPU-0
-+
-+enum {
-+	JSCALE_STATUS_OK = 0,
-+	JSCALE_UNKNOWN_MSG_TYPE,
-+	JSCALE_FAILED_FILE_SIZE,
-+	JSCALE_FAILED_MALLOC,
-+	JSCALE_FAILED_FORMAT,
-+	JSCALE_DECODE_ERROR,
-+	JSCALE_BUSY,
-+};
-+// <-- JScale
-+
-+#define GEMINI_IPI_IOCTL_BASE	'Z'
-+#define GEMINI_IPI_JSCALE_REQ		_IOW (GEMINI_IPI_IOCTL_BASE,0,JSCALE_REQ_T)
-+#define GEMINI_IPI_JSCALE_STAT		_IOR (GEMINI_IPI_IOCTL_BASE,1,JSCALE_RSP_T)
-+
-+
-+/*
-+* Simple spin lock operations.
-+*
-+*/
-+
-+#define spin_is_locked_dt(x)((x)->lock != 0)
-+
-+static inline int test_and_set_dt(spinlock_dt *lock)
-+{
-+unsigned long tmp;
-+__asm__ __volatile__(
-+"swp     %0, %2, [%1]\n"
-+: "=&r" (tmp)
-+: "r" (&lock->lock), "r" (1)
-+: "cc", "memory");
-+
-+return tmp;
-+}
-+
-+static inline void spin_lock_dt(spinlock_dt *lock)
-+{
-+
-+unsigned long tmp;
-+__asm__ __volatile__(
-+"1:     ldr   %0, [%1]\n"
-+"teq     %0, #0\n"
-+"swpeq   %0, %2, [%1]\n"
-+"       teqeq   %0, #0\n"
-+"       bne     1b"
-+       : "=&r" (tmp)
-+       : "r" (&lock->lock), "r" (1)
-+       : "cc", "memory");
-+}
-+
-+static inline void spin_unlock_dt(spinlock_dt *lock)
-+{
-+       __asm__ __volatile__(
-+"       str     %1, [%0]"
-+       :
-+       : "r" (&lock->lock), "r" (0)
-+       : "cc", "memory");
-+}
-+
-+static inline int getcpuid(void)
-+{
-+       int cpuid;
-+
-+      __asm__(
-+"mrc p8, 0, r0, c0, c0, 0\n"
-+"mov %0, r0"
-+       :"=r"(cpuid)
-+       :
-+       :"r0");
-+       return (cpuid & 0x07);
-+}
-+
-+
-+
-+#endif
---- /dev/null
-+++ b/include/asm-arm/arch-sl2312/irq.h
-@@ -0,0 +1,23 @@
-+/*
-+ *  linux/include/asm-arm/arch-sl2312/irq.h
-+ *
-+ *  Copyright (C) 1999 ARM Limited
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
-+ */
-+
-+ // Since we have PCI interrupt which the interrupt line is pseudo
-+ // we need do some fixup
-+int fixup_irq(int irq);
---- /dev/null
-+++ b/include/asm-arm/arch-sl2312/irqs.h
-@@ -0,0 +1,102 @@
-+/*
-+ *  linux/include/asm-arm/arch-camelot/irqs.h
-+ *
-+ *  Copyright (C) 2001 Altera Corporation
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
-+ */
-+
-+/* Use the Excalibur chip definitions */
-+#define INT_CTRL_TYPE
-+#include "asm/arch/int_ctrl.h"
-+
-+#ifdef CONFIG_SL3516_ASIC
-+#define	IRQ_SERIRQ_MAX					31
-+#define	IRQ_SERIRQ1						31
-+#define	IRQ_SERIRQ0                  	30
-+#define	IRQ_PCID 	                  	29
-+#define	IRQ_PCIC    	             	28
-+#define	IRQ_PCIB        	         	27
-+#define IRQ_PWR							26
-+#define IRQ_CIR							25
-+#define	IRQ_GPIO2                   	24
-+#define	IRQ_GPIO1                   	23
-+#define	IRQ_GPIO	                	22
-+#define	IRQ_SSP                     	21
-+#define IRQ_LPC                         20
-+#define IRQ_LCD                         19
-+#define	IRQ_UART                  		18
-+#define	IRQ_RTC                			17
-+#define	IRQ_TIMER3                  	16
-+#define	IRQ_TIMER2                    	15
-+#define	IRQ_TIMER1                    	14
-+#define IRQ_FLASH						12
-+#define	IRQ_USB1                    	11
-+#define IRQ_USB0						10
-+#define	IRQ_DMA                     	9
-+#define	IRQ_PCI                    		8
-+#define	IRQ_IPSEC              			7
-+#define	IRQ_RAID                        6
-+#define	IRQ_IDE1                    	5
-+#define	IRQ_IDE0                   		4
-+#define	IRQ_WATCHDOG                    3
-+#define	IRQ_GMAC1                       2
-+#define IRQ_GMAC0						1
-+#define	IRQ_CPU0_IP_IRQ                 0
-+#else
-+#define	IRQ_SERIRQ_MAX					31
-+#define	IRQ_SERIRQ1						31
-+#define	IRQ_SERIRQ0                  	30
-+#define	IRQ_PCID 	                  	29
-+#define	IRQ_PCIC    	             	28
-+#define	IRQ_PCIB        	         	27
-+#define IRQ_PWR							26
-+#define IRQ_CIR							25
-+#define	IRQ_GPIO2                   	24
-+#define	IRQ_GPIO1                   	23
-+#define	IRQ_GPIO	                	22
-+#define	IRQ_SSP                     	21
-+#define IRQ_LPC                         20
-+#define IRQ_LCD                         19
-+#define	IRQ_UART                  		18
-+#define	IRQ_RTC                			17
-+#define	IRQ_TIMER3                  	16
-+#define	IRQ_TIMER2                    	15
-+#define	IRQ_TIMER1                    	14
-+#define IRQ_FLASH						12
-+#define	IRQ_USB1                    	11
-+#define IRQ_USB0						10
-+#define	IRQ_DMA                     	9
-+#define	IRQ_PCI                    		8
-+#define	IRQ_IPSEC              			7
-+#define	IRQ_RAID                        6
-+#define	IRQ_IDE1                    	5
-+#define	IRQ_IDE0                   		4
-+#define	IRQ_WATCHDOG                    3
-+#define	IRQ_GMAC1                       2
-+#define IRQ_GMAC0						1
-+#endif
-+
-+#define ARCH_TIMER_IRQ		               IRQ_TIMER2   /* for MV 4.0 */
-+
-+#define IRQ_PCI_INTA				       PCI_IRQ_OFFSET + 0
-+#define IRQ_PCI_INTB				       PCI_IRQ_OFFSET + 1
-+#define IRQ_PCI_INTC				       PCI_IRQ_OFFSET + 2
-+#define IRQ_PCI_INTD				       PCI_IRQ_OFFSET + 3
-+
-+#define NR_IRQS                           (IRQ_PCI_INTD + 4)
-+
-+
-+
---- /dev/null
-+++ b/include/asm-arm/arch-sl2312/it8712.h
-@@ -0,0 +1,24 @@
-+
-+#ifndef __IT8712_H__
-+#define __IT8712_H__
-+
-+#include "asm/arch/sl2312.h"
-+
-+#define IT8712_IO_BASE			SL2312_LPC_IO_BASE
-+// Device LDN
-+#define LDN_SERIAL1				0x01
-+#define LDN_SERIAL2				0x02
-+#define LDN_PARALLEL			0x03
-+#define LDN_KEYBOARD			0x05
-+#define LDN_MOUSE				0x06
-+#define LDN_GPIO				0x07
-+
-+#define IT8712_UART1_PORT      	0x3F8
-+#define IT8712_UART2_PORT      	0x2F8
-+
-+#define IT8712_GPIO_BASE		0x800	// 0x800-0x804 for GPIO set1-set5
-+
-+void LPCSetConfig(char LdnNumber, char Index, char data);
-+char LPCGetConfig(char LdnNumber, char Index);
-+
-+#endif
---- /dev/null
-+++ b/include/asm-arm/arch-sl2312/memory.h
-@@ -0,0 +1,38 @@
-+/*
-+ *  linux/include/asm-arm/arch-sl2312/memory.h
-+ *
-+ *  Copyright (C) 2001 Altera Corporation
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
-+ */
-+#ifndef __ASM_ARCH_MMU_H
-+#define __ASM_ARCH_MMU_H
-+
-+/*
-+ * Physical DRAM offset.
-+ */
-+#define PHYS_OFFSET	UL(0x00000000)
-+
-+/*
-+ * Virtual view <-> DMA view memory address translations
-+ * virt_to_bus: Used to translate the virtual address to an
-+ *              address suitable to be passed to set_dma_addr
-+ * bus_to_virt: Used to convert an address for DMA operations
-+ *              to an address that the kernel can use.
-+ */
-+#define __virt_to_bus(x)	(x - PAGE_OFFSET + /*SDRAM_BASE*/0)
-+#define __bus_to_virt(x)	(x - /*SDRAM_BASE*/0 + PAGE_OFFSET)
-+
-+#endif
---- /dev/null
-+++ b/include/asm-arm/arch-sl2312/param.h
-@@ -0,0 +1,20 @@
-+/*
-+ *  linux/include/asm-arm/arch-epxa10db/param.h
-+ *
-+ *  Copyright (C) 1999 ARM Limited
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
-+ */
-+
---- /dev/null
-+++ b/include/asm-arm/arch-sl2312/pci.h
-@@ -0,0 +1,18 @@
-+
-+#ifndef __SL2312_PCI_H__
-+#define __SL2312_PCI_H__
-+
-+#define SL2312_PCI_PMC				0x40
-+#define SL2312_PCI_PMCSR			0x44
-+#define SL2312_PCI_CTRL1			0x48
-+#define SL2312_PCI_CTRL2			0x4c
-+#define SL2312_PCI_MEM1_BASE_SIZE	0x50
-+#define SL2312_PCI_MEM2_BASE_SIZE	0x54
-+#define SL2312_PCI_MEM3_BASE_SIZE	0x58
-+
-+
-+void sl2312_pci_mask_irq(unsigned int irq);
-+void sl2312_pci_unmask_irq(unsigned int irq);
-+int sl2312_pci_get_int_src(void);
-+
-+#endif
---- /dev/null
-+++ b/include/asm-arm/arch-sl2312/platform.h
-@@ -0,0 +1,7 @@
-+#ifndef PLATFORM_H
-+#define PLATFORM_H
-+#include "sl2312.h"
-+
-+#define MAXIRQNUM 68
-+#endif
-+
---- /dev/null
-+++ b/include/asm-arm/arch-sl2312/preempt.h
-@@ -0,0 +1,63 @@
-+/*
-+ * include/asm-arm/arch-sl2312/preempt.h
-+ *
-+ * Timing support for preempt-stats, kfi, ilatency patches
-+ *
-+ * Author: dsingleton 
-+ *
-+ * 2001-2004 (c) MontaVista Software, Inc. This file is licensed under
-+ * the terms of the GNU General Public License version 2. This program
-+ * is licensed "as is" without any warranty of any kind, whether express
-+ * or implied.
-+ */
-+
-+#ifndef _ASM_ARCH_PREEMT_H
-+#define _ASM_ARCH_PREEMT_H
-+
-+#include 
-+#include 
-+
-+static inline unsigned long clock_diff(unsigned long start, unsigned long stop)
-+{
-+        return (start - stop);
-+}
-+
-+static inline unsigned int readclock(void)
-+{
-+	unsigned int	x;
-+
-+	x = readl(IO_ADDRESS(SL2312_TIMER2_BASE));
-+	return x;
-+}
-+
-+static inline unsigned __ticks_per_usec(void)
-+{
-+#ifdef CONFIG_SL3516_ASIC
-+	unsigned int ahb_clock_rate_base=130;  /* unit = MHz*/
-+	unsigned int reg_v=0;
-+	unsigned int ticks_usec;
-+
-+	reg_v = readl(IO_ADDRESS((SL2312_GLOBAL_BASE+4)));
-+	reg_v >>=15;
-+	ticks_usec = (ahb_clock_rate_base + (reg_v & 0x07)*10)>>2;
-+
-+#else
-+	unsigned int ticks_usec=20;
-+#endif
-+
-+    return ticks_usec;
-+}
-+
-+/*
-+ * timer 1 runs @ 6Mhz  6 ticks = 1 microsecond
-+ * and is configed as a count down timer.
-+ */
-+#define TICKS_PER_USEC		    __ticks_per_usec()
-+#define ARCH_PREDEFINES_TICKS_PER_USEC
-+
-+#define clock_to_usecs(x)	    ((x) / TICKS_PER_USEC)
-+
-+#define INTERRUPTS_ENABLED(x)   (!(x & PSR_I_BIT))
-+
-+#endif
-+
---- /dev/null
-+++ b/include/asm-arm/arch-sl2312/sl2312.h
-@@ -0,0 +1,254 @@
-+#ifndef __sl2312_h
-+#define __sl2312_h
-+
-+/****************************************************************************
-+ * Copyright  Storlink Corp 2002-2003.  All rights reserved.                *
-+ *--------------------------------------------------------------------------*
-+ * Name:board.s                                                             *
-+ * Description:  SL231x specfic define                                      *
-+ * Author: Plus Chen                                                        *
-+ * Version: 0.9 Create
-+ ****************************************************************************/
-+
-+/*
-+  CPE address map;
-+
-+               +====================================================
-+    0x00000000 | FLASH
-+    0x0FFFFFFF |
-+               |====================================================
-+    0x10000000 | SDRAM
-+    0x1FFFFFFF |
-+               |====================================================
-+    0x20000000 | Global Registers        0x20000000-0x20FFFFFF
-+               | EMAC and DMA            0x21000000-0x21FFFFFF
-+               | UART Module             0x22000000-0x22FFFFFF
-+               | Timer Module            0x23000000-0x23FFFFFF
-+               | Interrupt Module        0x24000000-0x24FFFFFF
-+               | RTC Module              0x25000000-0x25FFFFFF
-+               | LPC Host Controller     0x26000000-0x26FFFFFF
-+               | LPC Peripherial IO      0x27000000-0x27FFFFFF
-+               | WatchDog Timer          0x28000000-0x28FFFFFF
-+    0x2FFFFFFF | Reserved                0x29000000-0x29FFFFFF
-+               |=====================================================
-+    0x30000000 | PCI IO, Configuration Registers
-+    0x3FFFFFFF |
-+               |=====================================================
-+    0x40000000 | PCI Memory
-+    0x4FFFFFFF |
-+               |=====================================================
-+    0x50000000 | Ethernet MAC and DMA    0x50000000-0x50FFFFFF
-+               | Security and DMA        0x51000000-0x51FFFFFF
-+               | IDE Channel 0 Register  0x52000000-0x527FFFFF
-+               | IDE Channel 1 Register  0x52800000-0x52FFFFFF
-+               | USB Register            0x53000000-0x53FFFFFF
-+               | Flash Controller        0x54000000-0x54FFFFFF
-+               | DRAM Controller         0x55000000-0x55FFFFFF
-+    0x5FFFFFFF | Reserved                0x56000000-0x5FFFFFFF
-+               |=====================================================
-+    0x60000000 | Reserved
-+    0x6FFFFFFF |
-+               |=====================================================
-+    0x70000000 | FLASH shadow Memory
-+    0x7FFFFFFF |
-+               |=====================================================
-+    0x80000000 | Big Endian of memory    0x00000000-0x7FFFFFFF
-+    0xFFFFFFFF |
-+               +=====================================================
-+*/
-+
-+
-+
-+/*-------------------------------------------------------------------------------
-+ Memory Map definitions
-+-------------------------------------------------------------------------------- */
-+#define TEST		1
-+#if 0
-+
-+static inline int GETCPUID()
-+{
-+       int cpuid;
-+      __asm__(
-+"mrc p8, 0, r0, c0, c0, 0\n"
-+"mov %0, r0"
-+       :"=r"(cpuid)
-+       :
-+       :"r0");
-+       return (cpuid & 0x07);
-+}
-+#endif
-+#define SL2312_SRAM_BASE                0x70000000       //  SRAM base after remap
-+#define SL2312_DRAM_BASE                0x00000000       //  DRAM base after remap
-+#define SL2312_RAM_BASE                 0x10000000       //  RAM code base before remap
-+#define SL2312_FLASH_BASE         	    0x30000000
-+#define SL2312_ROM_BASE                 0x30000000
-+#define SL2312_GLOBAL_BASE              0x40000000
-+#define SL2312_WAQTCHDOG_BASE           0x41000000
-+#define SL2312_UART_BASE                0x42000000
-+#define SL2312_TIMER_BASE               0x43000000
-+#define SL2312_LCD_BASE                 0x44000000
-+#define SL2312_RTC_BASE                 0x45000000
-+#define SL2312_SATA_BASE                0x46000000
-+#define SL2312_LPC_HOST_BASE            0x47000000
-+#define SL2312_LPC_IO_BASE              0x47800000
-+// #define SL2312_INTERRUPT_BASE           0x48000000
-+#define SL2312_INTERRUPT0_BASE          0x48000000
-+#define SL2312_INTERRUPT1_BASE          0x49000000
-+//#define SL2312_INTERRUPT_BASE		((getcpuid()==0)?SL2312_INTERRUPT0_BASE:SL2312_INTERRUPT1_BASE)
-+#define SL2312_INTERRUPT_BASE		    0x48000000
-+#define SL2312_SSP_CTRL_BASE            0x4A000000
-+#define SL2312_POWER_CTRL_BASE          0x4B000000
-+#define SL2312_CIR_BASE                 0x4C000000
-+#define SL2312_GPIO_BASE                0x4D000000
-+#define SL2312_GPIO_BASE1               0x4E000000
-+#define SL2312_GPIO_BASE2               0x4F000000
-+#define SL2312_PCI_IO_BASE              0x50000000
-+#define SL2312_PCI_MEM_BASE             0x58000000
-+#ifdef  CONFIG_NET_SL351X
-+#define SL2312_TOE_BASE                 0x60000000
-+#define SL2312_GMAC0_BASE               0x6000A000
-+#define SL2312_GMAC1_BASE               0x6000E000
-+#else
-+#define SL2312_GMAC0_BASE               0x60000000
-+#define SL2312_GMAC1_BASE               0x61000000
-+#endif
-+#define SL2312_SECURITY_BASE            0x62000000
-+#define SL2312_IDE0_BASE                0x63000000
-+#define SL2312_IDE1_BASE		        0x63400000
-+#define SL2312_RAID_BASE                0x64000000
-+#define SL2312_FLASH_CTRL_BASE          0x65000000
-+#define SL2312_DRAM_CTRL_BASE           0x66000000
-+#define SL2312_GENERAL_DMA_BASE         0x67000000
-+#define SL2312_USB_BASE                 0x68000000
-+#define SL2312_USB0_BASE                0x68000000
-+#define SL2312_USB1_BASE                0x69000000
-+#define SL2312_FLASH_SHADOW             0x30000000
-+#define SL2312_BIG_ENDIAN_BASE			0x80000000
-+
-+#ifdef CONFIG_GEMINI_IPI
-+#define CPU_1_MEM_BASE			0x4000000				// 64 MB
-+#define CPU_1_DATA_OFFSET		0x4000000-0x300000		// Offset 61 MB
-+#endif
-+
-+#define SL2312_TIMER1_BASE              SL2312_TIMER_BASE
-+#define SL2312_TIMER2_BASE              (SL2312_TIMER_BASE + 0x10)
-+#define SL2312_TIMER3_BASE              (SL2312_TIMER_BASE + 0x20)
-+
-+#define SL2312_PCI_DMA_MEM1_BASE		0x00000000
-+#define SL2312_PCI_DMA_MEM2_BASE		0x00000000
-+#define SL2312_PCI_DMA_MEM3_BASE		0x00000000
-+#define SL2312_PCI_DMA_MEM1_SIZE		7
-+#define SL2312_PCI_DMA_MEM2_SIZE		6
-+#define SL2312_PCI_DMA_MEM3_SIZE		6
-+
-+/*-------------------------------------------------------------------------------
-+ Global Module
-+---------------------------------------------------------------------------------*/
-+#define GLOBAL_ID                       0x00
-+#define GLOBAL_CHIP_ID                  0x002311
-+#define GLOBAL_CHIP_REV                 0xA0
-+#define GLOBAL_STATUS                   0x04
-+#define GLOBAL_CONTROL                  0x1C
-+#define GLOBAL_REMAP_BIT                0x01
-+#define GLOBAL_RESET_REG		0x0C
-+#define GLOBAL_MISC_REG					0x30
-+#define PFLASH_SHARE_BIT				0x02
-+
-+#define GLOBAL_RESET		(1<<31)
-+#define RESET_CPU1			(1<<30)
-+#define RESET_SATA1			(1<<27)
-+#define RESET_SATA0			(1<<26)
-+#define RESET_CIR			(1<<25)
-+#define RESET_EXT_DEV		(1<<24)
-+#define RESET_WD			(1<<23)
-+#define RESET_GPIO2			(1<<22)
-+#define RESET_GPIO1			(1<<21)
-+#define RESET_GPIO0			(1<<20)
-+#define RESET_SSP			(1<<19)
-+#define RESET_UART			(1<<18)
-+#define RESET_TIMER			(1<<17)
-+#define RESET_RTC			(1<<16)
-+#define RESET_INT0			(1<<15)
-+#define RESET_INT1			(1<<14)
-+#define RESET_LCD			(1<<13)
-+#define RESET_LPC			(1<<12)
-+#define RESET_APB			(1<<11)
-+#define RESET_DMA			(1<<10)
-+#define RESET_USB1			(1<<9 )
-+#define RESET_USB0			(1<<8 )
-+#define RESET_PCI			(1<<7 )
-+#define RESET_GMAC1			(1<<6 )
-+#define RESET_GMAC0			(1<<5 )
-+#define RESET_IPSEC			(1<<4 )
-+#define RESET_RAID			(1<<3 )
-+#define RESET_IDE			(1<<2 )
-+#define RESET_FLASH			(1<<1 )
-+#define RESET_DRAM			(1<<0 )
-+
-+
-+
-+
-+
-+
-+
-+
-+/*-------------------------------------------------------------------------------
-+ DRAM Module
-+---------------------------------------------------------------------------------*/
-+#define DRAM_SIZE_32M                   0x2000000
-+#define DRAM_SIZE_64M                   0x4000000
-+#define DRAM_SIZE_128M                  0x8000000
-+
-+#define DRAM_SIZE                       DRAM_SIZE_128M
-+
-+#define DRAM_SDRMR                      0x00
-+#define SDRMR_DISABLE_DLL               0x80010000
-+
-+/*------------------------------------------------------------------------------
-+ Share Pin Flag
-+--------------------------------------------------------------------------------*/
-+#ifdef CONFIG_SL2312_SHARE_PIN
-+#define FLASH_SHARE_BIT                    0
-+#define UART_SHARE_BIT                     1
-+#define EMAC_SHARE_BIT                     2
-+#define IDE_RW_SHARE_BIT                   3
-+#define IDE_CMD_SHARE_BIT                  4
-+#endif
-+/*-------------------------------------------------------------------------------
-+ System Clock
-+---------------------------------------------------------------------------------*/
-+
-+#ifndef SYS_CLK
-+#ifdef CONFIG_SL3516_ASIC
-+#define SYS_CLK                         150000000
-+#else
-+#define SYS_CLK                     	20000000
-+#endif
-+#endif
-+
-+#define AHB_CLK                     	SYS_CLK
-+#define MAX_TIMER                   	3
-+#ifndef APB_CLK
-+#ifdef CONFIG_SL3516_ASIC
-+#define APB_CLK                     	(SYS_CLK / 6)
-+#else
-+#define APB_CLK				SYS_CLK
-+#endif
-+#endif
-+
-+#ifdef CONFIG_SL3516_ASIC
-+#define UART_CLK                        48000000	// 30000000 for GeminiA chip, else 48000000
-+#else
-+#define UART_CLK			48000000
-+#endif
-+
-+#define SL2312_BAUD_115200              (UART_CLK / 1843200)
-+#define SL2312_BAUD_57600               (UART_CLK / 921600)
-+#define SL2312_BAUD_38400		        (UART_CLK / 614400)
-+#define SL2312_BAUD_19200               (UART_CLK / 307200)
-+#define SL2312_BAUD_14400               (UART_CLK / 230400)
-+#define SL2312_BAUD_9600                (UART_CLK / 153600)
-+
-+#endif
-+
-+
---- /dev/null
-+++ b/include/asm-arm/arch-sl2312/sl2312_ipsec.h
-@@ -0,0 +1,684 @@
-+#ifndef _IPSEC_DIAG_H
-+#define _IPSEC_DIAG_H
-+
-+#include 
-+
-+#define BIG_ENDIAN    0
-+
-+#define IPSEC_TEST    0
-+#define ZERO_COPY     1
-+
-+#define UINT unsigned int
-+#define BYTE unsigned char
-+
-+/* define cipher algorithm */
-+enum CIPHER {
-+	DES_ECB_E	=20,
-+	TDES_ECB_E	=21,
-+	AES_ECB_E	=22,
-+	DES_CBC_E	=24,
-+	TDES_CBC_E	=25,
-+	AES_CBC_E	=26,
-+
-+	DES_ECB_D	=27,
-+	TDES_ECB_D	=28,
-+	AES_ECB_D	=29,
-+	DES_CBC_D	=31,
-+	TDES_CBC_D	=32,
-+	AES_CBC_D	=33,
-+	A_SHA1      =12,
-+	A_HMAC_SHA1 =13,
-+	A_MD5       =14,
-+	A_HMAC_MD5  =15,
-+};
-+
-+// opMode
-+#define CIPHER_ENC    0x1
-+#define CIPHER_DEC    0x3
-+#define AUTH          0x4
-+#define ENC_AUTH      0x5
-+#define AUTH_DEC      0x7
-+
-+// cipherAlgorithm
-+#define CBC_DES       0x4
-+#define CBC_3DES      0x5
-+#define CBC_AES       0x6
-+#define ECB_DES       0x0
-+#define ECB_3DES      0x1
-+#define ECB_AES       0x2
-+
-+// authAlgorithm
-+#define SHA1         0
-+#define MD5          1
-+#define HMAC_SHA1    2
-+#define HMAC_MD5     3
-+#define FCS          4
-+
-+//cipher mode
-+#define ECB          0
-+#define CBC          1
-+
-+// authMode
-+#define AUTH_APPEND  0
-+#define AUTH_CHKVAL  1
-+
-+/******************************************************/
-+/*          the offset of IPSEC DMA register          */
-+/******************************************************/
-+enum IPSEC_DMA_REGISTER {
-+	IPSEC_DMA_DEVICE_ID		= 0xff00,
-+	IPSEC_DMA_STATUS		= 0xff04,
-+	IPSEC_TXDMA_CTRL 	 	= 0xff08,
-+	IPSEC_TXDMA_FIRST_DESC 	= 0xff0c,
-+	IPSEC_TXDMA_CURR_DESC	= 0xff10,
-+	IPSEC_RXDMA_CTRL		= 0xff14,
-+	IPSEC_RXDMA_FIRST_DESC	= 0xff18,
-+	IPSEC_RXDMA_CURR_DESC	= 0xff1c,
-+	IPSEC_TXDMA_BUF_ADDR    = 0xff28,
-+	IPSEC_RXDMA_BUF_ADDR    = 0xff38,
-+	IPSEC_RXDMA_BUF_SIZE		= 0xff30,
-+};
-+
-+#define IPSEC_STATUS_REG    0x00a8
-+#define IPSEC_RAND_NUM_REG  0x00ac
-+
-+/******************************************************/
-+/* the field definition of IPSEC DMA Module Register  */
-+/******************************************************/
-+typedef union
-+{
-+	unsigned int bits32;
-+	struct bit2_ff00
-+	{
-+#if (BIG_ENDIAN==1)
-+		unsigned int p_wclk 		:  4;	/* DMA_APB write clock period */
-+		unsigned int p_rclk 		:  4;	/* DMA_APB read clock period */
-+		unsigned int 				:  8;
-+		unsigned int device_id		: 12;
-+		unsigned int revision_id	:  4;
-+#else
-+		unsigned int revision_id	:  4;
-+		unsigned int device_id		: 12;
-+		unsigned int 				:  8;
-+		unsigned int p_rclk 		:  4;	/* DMA_APB read clock period */
-+		unsigned int p_wclk	    	:  4;	/* DMA_APB write clock period */
-+#endif
-+	} bits;
-+} IPSEC_DMA_DEVICE_ID_T;
-+
-+typedef union
-+{
-+	unsigned int bits32;
-+	struct bit2_ff04
-+	{
-+#if (BIG_ENDIAN==1)
-+		unsigned int ts_finish		:  1;	/* finished tx interrupt */
-+		unsigned int ts_derr		:  1;   /* AHB Bus Error while tx */
-+		unsigned int ts_perr		:  1;   /* Tx Descriptor protocol error */
-+		unsigned int ts_eodi		:  1;	/* TxDMA end of descriptor interrupt */
-+		unsigned int ts_eofi		:  1;   /* TxDMA end of frame interrupt */
-+		unsigned int rs_finish		:  1;   /* finished rx interrupt */
-+		unsigned int rs_derr		:  1;   /* AHB Bus Error while rx */
-+		unsigned int rs_perr		:  1;   /* Rx Descriptor protocol error */
-+		unsigned int rs_eodi		:  1;	/* RxDMA end of descriptor interrupt */
-+		unsigned int rs_eofi		:  1;	/* RxDMA end of frame interrupt */
-+        unsigned int intr           :  8;   /* Peripheral interrupt */
-+		unsigned int dma_reset 		:  1;	/* write 1 to this bit will cause DMA HClk domain soft reset */
-+		unsigned int peri_reset    	:  1;   /* write 1 to this bit will cause DMA PClk domain soft reset */
-+		unsigned int 				:  3;
-+		unsigned int loop_back		:  1;	/* loopback TxDMA to RxDMA */
-+        unsigned int intr_enable    :  8;   /* Peripheral Interrupt Enable */
-+#else
-+        unsigned int intr_enable    :  8;   /* Peripheral Interrupt Enable */
-+		unsigned int loop_back		:  1;	/* loopback TxDMA to RxDMA */
-+		unsigned int 				:  3;
-+		unsigned int peri_reset    	:  1;   /* write 1 to this bit will cause DMA PClk domain soft reset */
-+		unsigned int dma_reset 		:  1;	/* write 1 to this bit will cause DMA HClk domain soft reset */
-+        unsigned int intr           :  8;   /* Peripheral interrupt */
-+		unsigned int rs_eofi		:  1;	/* RxDMA end of frame interrupt */
-+		unsigned int rs_eodi		:  1;	/* RxDMA end of descriptor interrupt */
-+		unsigned int rs_perr		:  1;   /* Rx Descriptor protocol error */
-+		unsigned int rs_derr		:  1;   /* AHB Bus Error while rx */
-+		unsigned int rs_finish		:  1;   /* finished rx interrupt */
-+		unsigned int ts_eofi		:  1;   /* TxDMA end of frame interrupt */
-+		unsigned int ts_eodi		:  1;	/* TxDMA end of descriptor interrupt */
-+		unsigned int ts_perr		:  1;   /* Tx Descriptor protocol error */
-+		unsigned int ts_derr		:  1;   /* AHB Bus Error while tx */
-+		unsigned int ts_finish		:  1;	/* finished tx interrupt */
-+#endif
-+	} bits;
-+} IPSEC_DMA_STATUS_T;
-+
-+typedef union
-+{
-+	unsigned int bits32;
-+	struct bit2_ff08
-+	{
-+#if (BIG_ENDIAN==1)
-+		unsigned int td_start		:  1;	/* Start DMA transfer */
-+		unsigned int td_continue	:  1;   /* Continue DMA operation */
-+		unsigned int td_chain_mode	:  1;	/* Descriptor Chain Mode;1-Descriptor Chain mode, 0-Direct DMA mode*/
-+		unsigned int 				:  1;
-+		unsigned int td_prot		:  4;	/* TxDMA protection control */
-+		unsigned int td_burst_size  :  2;	/* TxDMA max burst size for every AHB request */
-+		unsigned int td_bus		    :  2;	/* peripheral bus width;0 - 8 bits;1 - 16 bits */
-+		unsigned int td_endian		:  1;	/* AHB Endian. 0-little endian; 1-big endian */
-+		unsigned int td_finish_en   :  1;	/* DMA Finish Event Interrupt Enable;1-enable;0-mask */
-+		unsigned int td_fail_en 	:  1;	/* DMA Fail Interrupt Enable;1-enable;0-mask */
-+		unsigned int td_perr_en 	:  1;	/* Protocol Failure Interrupt Enable;1-enable;0-mask */
-+		unsigned int td_eod_en  	:  1;	/* End of Descriptor interrupt Enable;1-enable;0-mask */
-+		unsigned int td_eof_en      :  1;   /* End of frame interrupt Enable;1-enable;0-mask */
-+		unsigned int 				: 14;
-+#else
-+		unsigned int 				: 14;
-+		unsigned int td_eof_en      :  1;   /* End of frame interrupt Enable;1-enable;0-mask */
-+		unsigned int td_eod_en  	:  1;	/* End of Descriptor interrupt Enable;1-enable;0-mask */
-+		unsigned int td_perr_en 	:  1;	/* Protocol Failure Interrupt Enable;1-enable;0-mask */
-+		unsigned int td_fail_en 	:  1;	/* DMA Fail Interrupt Enable;1-enable;0-mask */
-+		unsigned int td_finish_en   :  1;	/* DMA Finish Event Interrupt Enable;1-enable;0-mask */
-+		unsigned int td_endian		:  1;	/* AHB Endian. 0-little endian; 1-big endian */
-+		unsigned int td_bus		    :  2;	/* peripheral bus width;0 - 8 bits;1 - 16 bits */
-+		unsigned int td_burst_size  :  2;	/* TxDMA max burst size for every AHB request */
-+		unsigned int td_prot		:  4;	/* TxDMA protection control */
-+		unsigned int 				:  1;
-+		unsigned int td_chain_mode	:  1;	/* Descriptor Chain Mode;1-Descriptor Chain mode, 0-Direct DMA mode*/
-+		unsigned int td_continue	:  1;   /* Continue DMA operation */
-+		unsigned int td_start		:  1;	/* Start DMA transfer */
-+#endif
-+	} bits;
-+} IPSEC_TXDMA_CTRL_T;
-+
-+typedef union
-+{
-+	unsigned int bits32;
-+	struct bit2_ff0c
-+	{
-+#if (BIG_ENDIAN==1)
-+		unsigned int td_first_des_ptr	: 28;/* first descriptor address */
-+		unsigned int td_busy			:  1;/* 1-TxDMA busy; 0-TxDMA idle */
-+		unsigned int 					:  3;
-+#else
-+		unsigned int 					:  3;
-+		unsigned int td_busy			:  1;/* 1-TxDMA busy; 0-TxDMA idle */
-+		unsigned int td_first_des_ptr	: 28;/* first descriptor address */
-+#endif
-+	} bits;
-+} IPSEC_TXDMA_FIRST_DESC_T;
-+
-+typedef union
-+{
-+	unsigned int bits32;
-+	struct bit2_ff10
-+	{
-+#if (BIG_ENDIAN==1)
-+		unsigned int ndar			: 28;	/* next descriptor address */
-+		unsigned int eofie			:  1;	/* end of frame interrupt enable */
-+		unsigned int dec			:  1;	/* AHB bus address increment(0)/decrement(1) */
-+		unsigned int sof_eof		:  2;
-+#else
-+		unsigned int sof_eof		:  2;
-+		unsigned int dec			:  1;	/* AHB bus address increment(0)/decrement(1) */
-+		unsigned int eofie			:  1;	/* end of frame interrupt enable */
-+		unsigned int ndar			: 28;	/* next descriptor address */
-+#endif
-+	} bits;
-+} IPSEC_TXDMA_CURR_DESC_T;
-+
-+
-+typedef union
-+{
-+	unsigned int bits32;
-+	struct bit2_ff14
-+	{
-+#if (BIG_ENDIAN==1)
-+		unsigned int rd_start		:  1;	/* Start DMA transfer */
-+		unsigned int rd_continue	:  1;   /* Continue DMA operation */
-+		unsigned int rd_chain_mode	:  1;	/* Descriptor Chain Mode;1-Descriptor Chain mode, 0-Direct DMA mode*/
-+		unsigned int 				:  1;
-+		unsigned int rd_prot		:  4;	/* DMA protection control */
-+		unsigned int rd_burst_size  :  2;	/* DMA max burst size for every AHB request */
-+		unsigned int rd_bus		    :  2;	/* peripheral bus width;0 - 8 bits;1 - 16 bits */
-+		unsigned int rd_endian		:  1;	/* AHB Endian. 0-little endian; 1-big endian */
-+		unsigned int rd_finish_en   :  1;	/* DMA Finish Event Interrupt Enable;1-enable;0-mask */
-+		unsigned int rd_fail_en  	:  1;	/* DMA Fail Interrupt Enable;1-enable;0-mask */
-+		unsigned int rd_perr_en 	:  1;	/* Protocol Failure Interrupt Enable;1-enable;0-mask */
-+		unsigned int rd_eod_en  	:  1;	/* End of Descriptor interrupt Enable;1-enable;0-mask */
-+		unsigned int rd_eof_en      :  1;   /* End of frame interrupt Enable;1-enable;0-mask */
-+		unsigned int 				: 14;
-+#else
-+		unsigned int 				: 14;
-+		unsigned int rd_eof_en      :  1;   /* End of frame interrupt Enable;1-enable;0-mask */
-+		unsigned int rd_eod_en  	:  1;	/* End of Descriptor interrupt Enable;1-enable;0-mask */
-+		unsigned int rd_perr_en 	:  1;	/* Protocol Failure Interrupt Enable;1-enable;0-mask */
-+		unsigned int rd_fail_en  	:  1;	/* DMA Fail Interrupt Enable;1-enable;0-mask */
-+		unsigned int rd_finish_en   :  1;	/* DMA Finish Event Interrupt Enable;1-enable;0-mask */
-+		unsigned int rd_endian		:  1;	/* AHB Endian. 0-little endian; 1-big endian */
-+		unsigned int rd_bus		    :  2;	/* peripheral bus width;0 - 8 bits;1 - 16 bits */
-+		unsigned int rd_burst_size  :  2;	/* DMA max burst size for every AHB request */
-+		unsigned int rd_prot		:  4;	/* DMA protection control */
-+		unsigned int 				:  1;
-+		unsigned int rd_chain_mode	:  1;	/* Descriptor Chain Mode;1-Descriptor Chain mode, 0-Direct DMA mode*/
-+		unsigned int rd_continue	:  1;   /* Continue DMA operation */
-+		unsigned int rd_start		:  1;	/* Start DMA transfer */
-+#endif
-+	} bits;
-+} IPSEC_RXDMA_CTRL_T;
-+
-+typedef union
-+{
-+	unsigned int bits32;
-+	struct bit2_ff18
-+	{
-+#if (BIG_ENDIAN==1)
-+		unsigned int rd_first_des_ptr	: 28;/* first descriptor address */
-+		unsigned int rd_busy			:  1;/* 1-RxDMA busy; 0-RxDMA idle */
-+		unsigned int 					:  3;
-+#else
-+		unsigned int 					:  3;
-+		unsigned int rd_busy			:  1;/* 1-RxDMA busy; 0-RxDMA idle */
-+		unsigned int rd_first_des_ptr	: 28;/* first descriptor address */
-+#endif
-+	} bits;
-+} IPSEC_RXDMA_FIRST_DESC_T;
-+
-+typedef union
-+{
-+	unsigned int bits32;
-+	struct bit2_ff1c
-+	{
-+#if (BIG_ENDIAN==1)
-+		unsigned int ndar			: 28;	/* next descriptor address */
-+		unsigned int eofie			:  1;	/* end of frame interrupt enable */
-+		unsigned int dec			:  1;	/* AHB bus address increment(0)/decrement(1) */
-+		unsigned int sof_eof		:  2;
-+#else
-+		unsigned int sof_eof		:  2;
-+		unsigned int dec			:  1;	/* AHB bus address increment(0)/decrement(1) */
-+		unsigned int eofie			:  1;	/* end of frame interrupt enable */
-+		unsigned int ndar			: 28;	/* next descriptor address */
-+#endif
-+	} bits;
-+} IPSEC_RXDMA_CURR_DESC_T;
-+
-+
-+
-+/******************************************************/
-+/*    the field definition of IPSEC module Register   */
-+/******************************************************/
-+typedef union
-+{
-+	unsigned int id;
-+	struct bit_0000
-+	{
-+#if (BIG_ENDIAN==1)
-+		unsigned int device_id		: 28;
-+		unsigned int revision_id	:  4;
-+#else
-+		unsigned int revision_id	:  4;
-+		unsigned int device_id		: 28;
-+#endif
-+	} bits;
-+} IPSEC_ID_T;
-+
-+typedef union
-+{
-+    unsigned int control;
-+    struct bit_0004
-+    {
-+#if (BIG_ENDIAN==1)
-+        unsigned int op_mode            :  4; /* Operation Mode for the IPSec Module */
-+        unsigned int                    :  1;
-+        unsigned int cipher_algorithm   :  3;
-+        unsigned int aesnk              :  4; /* AES Key Size */
-+        unsigned int mix_key_sel        :  1; /* 0:use rCipherKey0-3  1:use Key Mixer */
-+        unsigned int                    :  2;
-+        unsigned int fcs_stream_copy    :  1; /* enable authentication stream copy */
-+        unsigned int auth_mode          :  1; /* 0-Append or 1-Check Authentication Result */
-+        unsigned int auth_algorithm     :  3;
-+        unsigned int                    :  1;
-+        unsigned int auth_check_len     :  3; /* Number of 32-bit words to be check or appended */
-+                                              /* by the authentication module */
-+        unsigned int process_id         :  8; /* Used to identify process.This number will be */
-+                                              /* copied to the descriptor status of received packet*/
-+#else
-+        unsigned int process_id         :  8; /* Used to identify process.This number will be */
-+                                              /* copied to the descriptor status of received packet*/
-+        unsigned int auth_check_len     :  3; /* Number of 32-bit words to be check or appended */
-+                                              /* by the authentication module */
-+        unsigned int                    :  1;
-+        unsigned int auth_algorithm     :  3;
-+        unsigned int auth_mode          :  1; /* 0-Append or 1-Check Authentication Result */
-+        unsigned int fcs_stream_copy    :  1; /* enable authentication stream copy */
-+        unsigned int                    :  2;
-+        unsigned int mix_key_sel        :  1; /* 0:use rCipherKey0-3  1:use Key Mixer */
-+        unsigned int aesnk              :  4; /* AES Key Size */
-+        unsigned int cipher_algorithm   :  3;
-+        unsigned int                    :  1;
-+        unsigned int op_mode            :  4; /* Operation Mode for the IPSec Module */
-+#endif
-+    } bits;
-+} IPSEC_CONTROL_T;
-+
-+
-+typedef union
-+{
-+    unsigned int cipher_packet;
-+    struct bit_0008
-+    {
-+#if (BIG_ENDIAN==1)
-+        unsigned int cipher_header_len    : 16; /* The header length to be skipped by the cipher */
-+        unsigned int cipher_algorithm_len : 16; /* The length of message body to be encrypted/decrypted */
-+#else
-+        unsigned int cipher_algorithm_len : 16; /* The length of message body to be encrypted/decrypted */
-+        unsigned int cipher_header_len    : 16; /* The header length to be skipped by the cipher */
-+#endif
-+    } bits;
-+} IPSEC_CIPHER_PACKET_T;
-+
-+typedef union
-+{
-+    unsigned int auth_packet;
-+    struct bit_000c
-+    {
-+#if (BIG_ENDIAN==1)
-+        unsigned int auth_header_len    : 16; /* The header length that is to be skipped by the authenticator */
-+        unsigned int auth_algorithm_len : 16; /* The length of message body that is to be authenticated */
-+#else
-+        unsigned int auth_algorithm_len : 16; /* The length of message body that is to be authenticated */
-+        unsigned int auth_header_len    : 16; /* The header length that is to be skipped by the authenticator */
-+#endif
-+    } bits;
-+} IPSEC_AUTH_PACKET_T;
-+
-+typedef union
-+{
-+    unsigned int status;
-+    struct bit_00a8
-+    {
-+#if (BIG_ENDIAN==1)
-+        unsigned int auth_cmp_rslt  :  1; /* Authentication Compare result */
-+        unsigned int wep_crc_ok     :  1; /* WEP ICV compare result */
-+        unsigned int tkip_mic_ok    :  1; /* TKIP Mic compare result */
-+        unsigned int ccm_mic_ok     :  1; /* CCM Mic compare result */
-+        unsigned int                : 16;
-+        unsigned int parser_err_code:  4; /* Authentication Compare result */
-+        unsigned int auth_err_code  :  4; /* Authentication module error code */
-+        unsigned int cipher_err_code:  4; /* Cipher module erroe code */
-+#else
-+        unsigned int cipher_err_code:  4; /* Cipher module erroe code */
-+        unsigned int auth_err_code  :  4; /* Authentication module error code */
-+        unsigned int parser_err_code:  4; /* Authentication Compare result */
-+        unsigned int                : 16;
-+        unsigned int ccm_mic_ok     :  1; /* CCM Mic compare result */
-+        unsigned int tkip_mic_ok    :  1; /* TKIP Mic compare result */
-+        unsigned int wep_crc_ok     :  1; /* WEP ICV compare result */
-+        unsigned int auth_cmp_rslt  :  1; /* Authentication Compare result */
-+#endif
-+    } bits;
-+} IPSEC_STATUS_T;
-+
-+
-+
-+/************************************************************************/
-+/*              IPSec Descriptor Format                                 */
-+/************************************************************************/
-+typedef struct descriptor_t
-+{
-+	union frame_control_t
-+	{
-+		unsigned int bits32;
-+		struct bits_0000
-+		{
-+#if (BIG_ENDIAN==1)
-+			unsigned int own 		: 1;	/* owner bit. 0-CPU, 1-DMA */
-+			unsigned int derr		: 1;	/* data error during processing this descriptor */
-+			unsigned int perr		: 1;	/* protocol error during processing this descriptor */
-+			unsigned int            : 1;    /* authentication compare result */
-+			unsigned int            : 6;    /* checksum[15:8] */
-+			unsigned int desc_count : 6;	/* number of descriptors used for the current frame */
-+			unsigned int buffer_size:16;	/* transfer buffer size associated with current description*/
-+#else
-+			unsigned int buffer_size:16;	/* transfer buffer size associated with current description*/
-+			unsigned int desc_count : 6;	/* number of descriptors used for the current frame */
-+			unsigned int            : 6;    /* checksum[15:8] */
-+			unsigned int            : 1;    /* authentication compare result */
-+			unsigned int perr		: 1;	/* protocol error during processing this descriptor */
-+			unsigned int derr		: 1;	/* data error during processing this descriptor */
-+			unsigned int own 		: 1;	/* owner bit. 0-CPU, 1-DMA */
-+#endif
-+		} bits;
-+	} frame_ctrl;
-+
-+	union flag_status_t
-+	{
-+		unsigned int bits32;
-+		struct bits_0004
-+		{
-+#if (BIG_ENDIAN==1)
-+//            unsigned int checksum   : 8; /* checksum[7:0] */
-+			unsigned int            : 4;
-+			unsigned int auth_result: 1;
-+			unsigned int wep_crc_ok : 1;
-+			unsigned int tkip_mic_ok: 1;
-+			unsigned int ccmp_mic_ok: 1;
-+			unsigned int process_id : 8;
-+			unsigned int frame_count:16;
-+#else
-+			unsigned int frame_count:16;
-+			unsigned int process_id : 8;
-+			unsigned int ccmp_mic_ok: 1;
-+			unsigned int tkip_mic_ok: 1;
-+			unsigned int wep_crc_ok : 1;
-+			unsigned int auth_result: 1;
-+			unsigned int            : 4;
-+//            unsigned int checksum   : 8; /* checksum[7:0] */
-+#endif
-+		} bits_rx_status;
-+
-+		struct bits_0005
-+		{
-+#if (BIG_ENDIAN==1)
-+            unsigned int            : 8;
-+			unsigned int process_id : 8;
-+			unsigned int frame_count:16;
-+#else
-+			unsigned int frame_count:16;
-+			unsigned int process_id : 8;
-+            unsigned int            : 8;
-+#endif
-+		} bits_tx_status;
-+
-+		struct bits_0006
-+		{
-+#if (BIG_ENDIAN==1)
-+			unsigned int            :22;
-+			unsigned int tqflag     :10;
-+#else
-+			unsigned int tqflag     :10;
-+			unsigned int            :22;
-+#endif
-+		} bits_tx_flag;
-+	} flag_status;
-+
-+	unsigned int buf_adr;	/* data buffer address */
-+
-+	union next_desc_t
-+	{
-+		unsigned int next_descriptor;
-+		struct bits_000c
-+		{
-+#if (BIG_ENDIAN==1)
-+			unsigned int ndar		:28;	/* next descriptor address */
-+			unsigned int eofie		: 1;	/* end of frame interrupt enable */
-+			unsigned int dec   		: 1;	/* AHB bus address. 0-increment; 1-decrement */
-+			unsigned int sof_eof	: 2;	/* 00-the linking descriptor   01-the last descriptor of a frame*/
-+			                                /* 10-the first descriptor of a frame    11-only one descriptor for a frame*/
-+#else
-+			unsigned int sof_eof	: 2;	/* 00-the linking descriptor   01-the last descriptor of a frame*/
-+			                                /* 10-the first descriptor of a frame    11-only one descriptor for a frame*/
-+			unsigned int dec   		: 1;	/* AHB bus address. 0-increment; 1-decrement */
-+			unsigned int eofie		: 1;	/* end of frame interrupt enable */
-+			unsigned int ndar		:28;	/* next descriptor address */
-+#endif
-+		} bits;
-+	} next_desc;
-+} IPSEC_DESCRIPTOR_T;
-+
-+
-+typedef struct IPSEC_S
-+{
-+    unsigned char       *tx_bufs;
-+    unsigned char       *rx_bufs;
-+	IPSEC_DESCRIPTOR_T	*tx_desc;	    /* point to virtual TX descriptor address*/
-+	IPSEC_DESCRIPTOR_T	*rx_desc;	    /* point to virtual RX descriptor address*/
-+	IPSEC_DESCRIPTOR_T	*tx_cur_desc;	/* point to current TX descriptor */
-+	IPSEC_DESCRIPTOR_T	*rx_cur_desc;	/* point to current RX descriptor */
-+	IPSEC_DESCRIPTOR_T  *tx_finished_desc;
-+	IPSEC_DESCRIPTOR_T  *rx_finished_desc;
-+	dma_addr_t          rx_desc_dma;	/* physical RX descriptor address */
-+	dma_addr_t          tx_desc_dma;    /* physical TX descriptor address */
-+	dma_addr_t          rx_bufs_dma;    /* physical RX descriptor address */
-+	dma_addr_t          tx_bufs_dma;    /* physical TX descriptor address */
-+} IPSEC_T;
-+
-+
-+/*=====================================================================================================*/
-+/*  Data Structure of IPSEC Control Packet  */
-+/*=====================================================================================================*/
-+typedef struct IPSEC_ECB_AUTH_S
-+{
-+    IPSEC_CONTROL_T         control; /* control parameter */
-+    IPSEC_CIPHER_PACKET_T   cipher; /* cipher packet parameter */
-+    IPSEC_AUTH_PACKET_T     auth;   /* authentication packet parameter */
-+    unsigned char           cipher_key[8*4];
-+    unsigned char           auth_check_val[5*4];
-+} IPSEC_ECB_AUTH_T;
-+
-+typedef struct IPSEC_CBC_AUTH_S
-+{
-+    IPSEC_CONTROL_T         control; /* control parameter */
-+    IPSEC_CIPHER_PACKET_T   cipher; /* cipher packet parameter */
-+    IPSEC_AUTH_PACKET_T     auth;   /* authentication packet parameter */
-+    unsigned char           cipher_iv[4*4];
-+    unsigned char           cipher_key[8*4];
-+    unsigned char           auth_check_val[5*4];
-+} IPSEC_CBC_AUTH_T;
-+
-+typedef struct IPSEC_ECB_HMAC_AUTH_S
-+{
-+    IPSEC_CONTROL_T         control; /* control parameter */
-+    IPSEC_CIPHER_PACKET_T   cipher; /* cipher packet parameter */
-+    IPSEC_AUTH_PACKET_T     auth;   /* authentication packet parameter */
-+    unsigned char           cipher_key[8*4];
-+    unsigned char           auth_key[16*4];
-+    unsigned char           auth_check_val[5*4];
-+} IPSEC_ECB_AUTH_HMAC_T;
-+
-+typedef struct IPSEC_CBC_HMAC_AUTH_S
-+{
-+    IPSEC_CONTROL_T         control; /* control parameter */
-+    IPSEC_CIPHER_PACKET_T   cipher; /* cipher packet parameter */
-+    IPSEC_AUTH_PACKET_T     auth;   /* authentication packet parameter */
-+    unsigned char           cipher_iv[4*4];
-+    unsigned char           cipher_key[8*4];
-+    unsigned char           auth_key[16*4];
-+    unsigned char           auth_check_val[5*4];
-+} IPSEC_CBC_AUTH_HMAC_T;
-+
-+typedef struct IPSEC_HMAC_AUTH_S
-+{
-+    IPSEC_CONTROL_T         control; /* control parameter */
-+    IPSEC_AUTH_PACKET_T     auth;   /* authentication packet parameter */
-+    unsigned char           auth_key[16*4];
-+    unsigned char           auth_check_val[5*4];
-+} IPSEC_HMAC_AUTH_T;
-+
-+typedef union
-+{
-+    unsigned char auth_pkt[28];
-+
-+    struct IPSEC_AUTH_S
-+    {
-+        IPSEC_CONTROL_T         control; /* control parameter(4-byte) */
-+        IPSEC_AUTH_PACKET_T     auth;   /* authentication packet parameter(4-byte) */
-+        unsigned char           auth_check_val[5*4];
-+    } var;
-+} IPSEC_AUTH_T;
-+
-+typedef struct IPSEC_CIPHER_CBC_S
-+{
-+    IPSEC_CONTROL_T         control; /* control parameter */
-+    IPSEC_CIPHER_PACKET_T   cipher; /* cipher packet parameter */
-+    unsigned char           cipher_iv[4*4];
-+    unsigned char           cipher_key[8*4];
-+} IPSEC_CIPHER_CBC_T;
-+
-+typedef struct IPSEC_CIPHER_ECB_S
-+{
-+    IPSEC_CONTROL_T         control; /* control parameter */
-+    IPSEC_CIPHER_PACKET_T   cipher; /* cipher packet parameter */
-+    unsigned char           cipher_key[8*4];
-+} IPSEC_CIPHER_ECB_T;
-+
-+
-+/****************************************************************************
-+ *                          Structure Definition                            *
-+ ****************************************************************************/
-+struct IPSEC_PACKET_S
-+{
-+    unsigned int    op_mode;            /* CIPHER_ENC(1),CIPHER_DEC(3),AUTH(4),ENC_AUTH(5),AUTH_DEC(7) */
-+    unsigned int    cipher_algorithm;   /* ECB_DES(0),ECB_3DES(1),ECB_AES(2),CBC_DES(4),CBC_3DES(5),CBC_AES(6) */
-+    unsigned int    auth_algorithm;     /* SHA1(0),MD5(1),HMAC_SHA1(2),HMAC_MD5(3),FCS(4) */
-+    unsigned int    auth_result_mode;   /* AUTH_APPEND(0),AUTH_CHKVAL(1) */
-+    unsigned int    process_id;         /* Used to identify the process */
-+    unsigned int    auth_header_len;    /* Header length to be skipped by the authenticator */
-+    unsigned int    auth_algorithm_len; /* Length of message body that is to be authenticated */
-+    unsigned int    cipher_header_len;  /* Header length to be skipped by the cipher */
-+    unsigned int    cipher_algorithm_len;   /* Length of message body to be encrypted or decrypted */
-+    unsigned char   iv[16];             /* Initial vector used for DES,3DES,AES */
-+    unsigned int    iv_size;            /* Initial vector size */
-+    unsigned char   auth_key[64];       /* authentication key */
-+    unsigned int    auth_key_size;      /* authentication key size */
-+    unsigned char   cipher_key[32];     /* cipher key */
-+    unsigned int    cipher_key_size;    /* cipher key size */
-+    struct scatterlist *in_packet;         /* input_packet buffer pointer */
-+    //unsigned char		*in_packet;         /* input_packet buffer pointer */
-+    unsigned int    pkt_len;            /* input total packet length */
-+    unsigned char   auth_checkval[20];  /* Authentication check value/FCS check value */
-+    struct IPSEC_PACKET_S *next,*prev;        /* pointer to next/previous operation to perform on buffer */
-+    void (*callback)(struct IPSEC_PACKET_S *); /* function to call when done authentication/cipher */
-+    unsigned char   *out_packet;        /* output_packet buffer pointer */
-+    //struct scatterlist *out_packet;        /* output_packet buffer pointer */
-+    unsigned int    out_pkt_len;        /* output total packet length */
-+    unsigned int    auth_cmp_result;    /* authentication compare result */
-+    unsigned int    checksum;           /* checksum value */
-+    unsigned int    status;             /* ipsec return status. 0:success, others:fail */
-+#if (IPSEC_TEST == 1)
-+    unsigned char    *sw_packet;         /* for test only */
-+    unsigned int    sw_pkt_len;         /* for test only */
-+#endif
-+} ;
-+
-+/*****************************************************************************
-+ * Function    : ipsec_crypto_hw_process
-+ * Description : This function processes H/W authentication and cipher.
-+ *       Input : op_info - the authentication and cipher information for IPSec module.
-+ *      Output : none.
-+ *      Return : 0 - success, others - failure.
-+ *****************************************************************************/
-+int ipsec_crypto_hw_process(struct IPSEC_PACKET_S  *op_info);
-+
-+int ipsec_get_cipher_algorithm(unsigned char *alg_name,unsigned int alg_mode);
-+int ipsec_get_auth_algorithm(unsigned char *alg_name,unsigned int alg_mode);
-+#if 0
-+void ipsec_sw_authentication(char *data,unsigned int data_len,char *authkey,char authAlgorithm,char *auth_result);
-+void ipsec_sw_cipher(unsigned char *pt,unsigned int pt_len, unsigned char *cipher_key, unsigned int key_size,
-+                            unsigned char *iv,unsigned int cipherAlgorithm,unsigned char *ct);
-+void ipsec_sw_auth_cipher(unsigned int op_mode,char *data,unsigned int data_len,
-+                                BYTE *auth_key,char authAlgorithm,char *auth_result,
-+                                char *pt, unsigned int pt_len,char *cipher_key, int key_size,
-+                                char *iv, char cipherAlgorithm,char *ct);
-+#endif
-+
-+
-+#endif
---- /dev/null
-+++ b/include/asm-arm/arch-sl2312/sl_random.h
-@@ -0,0 +1,2 @@
-+#define RANDOM_ADD		(IO_ADDRESS (0x051000000) + 0x0AC)
-+
---- /dev/null
-+++ b/include/asm-arm/arch-sl2312/system.h
-@@ -0,0 +1,54 @@
-+/*
-+ *  linux/include/asm-arm/arch-sl2312/system.h
-+ *
-+ *  Copyright (C) 1999 ARM Limited
-+ *  Copyright (C) 2000 Deep Blue Solutions Ltd
-+ *  Copyright (C) 2001 Altera Corporation
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
-+ */
-+#ifndef __ASM_ARCH_SYSTEM_H
-+#define __ASM_ARCH_SYSTEM_H
-+
-+#include 
-+#include 
-+#include 
-+#include 
-+
-+static void arch_idle(void)
-+{
-+	/*
-+	 * This should do all the clock switching
-+	 * and wait for interrupt tricks
-+	 */
-+	cpu_do_idle();
-+}
-+
-+extern __inline__ void arch_reset(char mode)
-+{
-+	__raw_writel( (int) GLOBAL_RESET|RESET_CPU1, IO_ADDRESS(SL2312_GLOBAL_BASE) + GLOBAL_RESET_REG);
-+}
-+
-+
-+void (*pm_power_off)(void);
-+//{
-+//	printk("arch_power_off\n");
-+
-+	// Power off
-+//	__raw_writel( (int) 0x00000001, IO_ADDRESS(SL2312_POWER_CTRL_BASE) + 0x04);
-+
-+//}
-+
-+#endif
---- /dev/null
-+++ b/include/asm-arm/arch-sl2312/timer.h
-@@ -0,0 +1,53 @@
-+/*
-+ *
-+ *  This file contains the register definitions for the Excalibur
-+ *  Timer TIMER00.
-+ *
-+ *  Copyright (C) 2001 Altera Corporation
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
-+ */
-+#ifndef __TIMER_H
-+#define __TIMER_H
-+
-+/*
-+ * Register definitions for the timers
-+ */
-+
-+#define TIMER_COUNT(BASE_ADDR)          (TIMER_TYPE (BASE_ADDR  + 0x00 ))
-+#define TIMER_LOAD(BASE_ADDR)           (TIMER_TYPE (BASE_ADDR  + 0x04 ))
-+#define TIMER_MATCH1(BASE_ADDR)         (TIMER_TYPE (BASE_ADDR  + 0x08 ))
-+#define TIMER_MATCH2(BASE_ADDR)         (TIMER_TYPE (BASE_ADDR  + 0x0C ))
-+#define TIMER_CR(BASE_ADDR)             (TIMER_TYPE (BASE_ADDR  + 0x30 ))
-+#define TIMER_1_CR_ENABLE_MSK 		    (0x00000001)
-+#define TIMER_1_CR_ENABLE_OFST 		    (0)
-+#define TIMER_1_CR_CLOCK_MSK  		    (0x00000002)
-+#define TIMER_1_CR_CLOCK_OFST 		    (1)
-+#define TIMER_1_CR_INT_MSK 		        (0x00000004)
-+#define TIMER_1_CR_INT_OFST 		    (2)
-+#define TIMER_2_CR_ENABLE_MSK 		    (0x00000008)
-+#define TIMER_2_CR_ENABLE_OFST 		    (3)
-+#define TIMER_2_CR_CLOCK_MSK  		    (0x00000010)
-+#define TIMER_2_CR_CLOCK_OFST 		    (4)
-+#define TIMER_2_CR_INT_MSK 		        (0x00000020)
-+#define TIMER_2_CR_INT_OFST 		    (5)
-+#define TIMER_3_CR_ENABLE_MSK 		    (0x00000040)
-+#define TIMER_3_CR_ENABLE_OFST 		    (6)
-+#define TIMER_3_CR_CLOCK_MSK  		    (0x00000080)
-+#define TIMER_3_CR_CLOCK_OFST 		    (7)
-+#define TIMER_3_CR_INT_MSK 		        (0x00000100)
-+#define TIMER_3_CR_INT_OFST 		    (8)
-+
-+#endif /* __TIMER00_H */
---- /dev/null
-+++ b/include/asm-arm/arch-sl2312/timex.h
-@@ -0,0 +1,29 @@
-+/*
-+ *  linux/include/asm-arm/arch-epxa10db/timex.h
-+ *
-+ *  Excalibur timex specifications
-+ *
-+ *  Copyright (C) 2001 Altera Corporation
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
-+ */
-+
-+/*
-+ * ??
-+ */
-+#include 
-+
-+#define CLOCK_TICK_RATE		APB_CLK
-+
---- /dev/null
-+++ b/include/asm-arm/arch-sl2312/uart.h
-@@ -0,0 +1,100 @@
-+/* *
-+ *  Copyright (C) 2001 Altera Corporation
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
-+ */
-+#ifndef __UART_H
-+#define __UART_H
-+
-+/*
-+ * Register definitions for the UART
-+ */
-+
-+#define UART_TX_FIFO_SIZE      (15)
-+
-+#define UART_RBR(BASE_ADDR) (UART_TYPE (BASE_ADDR  + 0x00))  // read
-+#define UART_THR(BASE_ADDR) (UART_TYPE (BASE_ADDR  + 0x00))  // write
-+#define UART_IER(BASE_ADDR) (UART_TYPE (BASE_ADDR  + 0x04))
-+#define UART_IER_MS                                 (0x08)
-+#define UART_IER_RLS                                (0x04)
-+#define UART_IER_TE                                 (0x02)
-+#define UART_IER_DR                                 (0x01)
-+#define UART_IIR(BASE_ADDR) (UART_TYPE (BASE_ADDR  + 0x08))   // read
-+#define UART_IIR_NONE                		    (0x01)	/* No interrupt pending */
-+#define UART_IIR_RLS                 		    (0x06)	/* Receive Line Status */
-+#define UART_IIR_DR                  		    (0x04)	/* Receive Data Ready */
-+#define UART_IIR_TIMEOUT             		    (0x0c)	/* Receive Time Out */
-+#define UART_IIR_TE                  		    (0x02)	/* THR Empty */
-+#define UART_IIR_MODEM               		    (0x00)	/* Modem Status */
-+#define UART_FCR(BASE_ADDR) (UART_TYPE (BASE_ADDR  + 0x08))  // write
-+#define UART_FCR_FE                  		    (0x01) 	/* FIFO Enable */
-+#define UART_FCR_RXFR                		    (0x02) 	/* Rx FIFO Reset */
-+#define UART_FCR_TXFR               		    (0x04) 	/* Tx FIFO Reset */
-+#define UART_FCR_FIFO_1C                            (0x00)
-+#define UART_FCR_FIFO_4C                            (0x40)
-+#define UART_FCR_FIFO_8C                            (0x80)
-+#define UART_FCR_FIFO_14C                           (0xC0)
-+#define UART_LCR(BASE_ADDR) (UART_TYPE (BASE_ADDR  + 0x0C))
-+#define UART_LCR_MSK                                (0x03)
-+#define UART_LCR_LEN5                		    (0x00)
-+#define UART_LCR_LEN6                		    (0x01)
-+#define UART_LCR_LEN7                		    (0x02)
-+#define UART_LCR_LEN8                		    (0x03)
-+#define UART_LCR_STOP                		    (0x04)
-+#define UART_LCR_EVEN                		    (0x18) 	/* Even Parity */
-+#define UART_LCR_ODD                 		    (0x08)     	/* Odd Parity */
-+#define UART_LCR_PE                  		    (0x08)	/* Parity Enable */
-+#define UART_LCR_SETBREAK            		    (0x40)	/* Set Break condition */
-+#define UART_LCR_STICKPARITY         		    (0x20)	/* Stick Parity Enable */
-+#define UART_LCR_DLAB                		    (0x80)     	/* Divisor Latch Access Bit */
-+#define UART_MCR(BASE_ADDR) (UART_TYPE (BASE_ADDR  + 0x10))
-+#define UART_MCR_DTR                 		    (0x1)	/* Data Terminal Ready */
-+#define UART_MCR_RTS                 		    (0x2)	/* Request to Send */
-+#define UART_MCR_OUT1                		    (0x4)	/* output	1 */
-+#define UART_MCR_OUT2                		    (0x8)	/* output2 or global interrupt enable */
-+#define UART_MCR_LPBK                		    (0x10)	/* loopback mode */
-+#define UART_MCR_MASK                               (0xE3)
-+#define UART_LSR(BASE_ADDR) (UART_TYPE (BASE_ADDR  + 0x14))
-+#define UART_LSR_DR                  		    (0x01)     	/* Data Ready */
-+#define UART_LSR_OE                  		    (0x02)     	/* Overrun Error */
-+#define UART_LSR_PE                  		    (0x04)     	/* Parity Error */
-+#define UART_LSR_FE                  		    (0x08)     	/* Framing Error */
-+#define UART_LSR_BI                                 (0x10)     	/* Break Interrupt */
-+#define UART_LSR_THRE                               (0x20)     	/* THR Empty */
-+#define UART_LSR_TE                                 (0x40)     	/* Transmitte Empty */
-+#define UART_LSR_DE                                 (0x80)     	/* FIFO Data Error */
-+#define UART_MSR(BASE_ADDR) (UART_TYPE (BASE_ADDR  + 0x18))
-+#define UART_MSR_DELTACTS            		    (0x01)	/* Delta CTS */
-+#define UART_MSR_DELTADSR            		    (0x02)	/* Delta DSR */
-+#define UART_MSR_TERI                		    (0x04)	/* Trailing Edge RI */
-+#define UART_MSR_DELTACD             		    (0x08)	/* Delta CD */
-+#define UART_MSR_CTS                 		    (0x10)	/* Clear To Send */
-+#define UART_MSR_DSR                 		    (0x20)	/* Data Set Ready */
-+#define UART_MSR_RI                  		    (0x40)	/* Ring Indicator */
-+#define UART_MSR_DCD                 		    (0x80)	/* Data Carrier Detect */
-+#define UART_SPR(BASE_ADDR) (UART_TYPE (BASE_ADDR  + 0x1C))
-+#define UART_DIV_LO(BASE_ADDR) (UART_TYPE (BASE_ADDR  + 0x0))
-+#define UART_DIV_HI(BASE_ADDR) (UART_TYPE (BASE_ADDR  + 0x4))
-+#define UART_PSR(BASE_ADDR) (UART_TYPE (BASE_ADDR  + 0x8))
-+#define UART_MDR(BASE_ADDR) (UART_TYPE (BASE_ADDR  + 0x20))
-+#define UART_MDR_SERIAL                             (0x0)
-+
-+#define UART_MSR_DDCD	0x08	/* Delta DCD */
-+#define UART_MSR_DDSR	0x02	/* Delta DSR */
-+#define UART_MSR_DCTS	0x01	/* Delta CTS */
-+#define UART_MSR_ANY_DELTA 0x0F	/* Any of the delta bits! */
-+
-+
-+#endif /* __UART_H */
---- /dev/null
-+++ b/include/asm-arm/arch-sl2312/uncompress.h
-@@ -0,0 +1,94 @@
-+/*
-+ *  linux/include/asm-arm/arch-epxa10db/uncompress.h
-+ *
-+ *  Copyright (C) 1999 ARM Limited
-+ *  Copyright (C) 2001 Altera Corporation
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
-+ */
-+#include "asm/arch/platform.h"
-+#include "asm/arch/hardware.h"
-+#define UART_TYPE (volatile unsigned int*)
-+#ifndef CONFIG_SERIAL_IT8712
-+#include "asm/arch/uart.h"
-+#endif
-+extern unsigned int it8712_uart_base;
-+
-+/*
-+ * This does not append a newline
-+ */
-+static void putstr(const char *s)
-+{
-+
-+#ifdef CONFIG_SERIAL_IT8712
-+
-+	unsigned char *base,*status,stat;
-+	int i ;
-+
-+	status = (unsigned char*)it8712_uart_base + 5;
-+	base = (unsigned char*)it8712_uart_base ;
-+
-+	while (*s) {
-+
-+		stat = *status;
-+		while (!(stat&0x20)) {				// check status
-+			for(i=0;i<0x10;i++)	;
-+			status = (unsigned char*)it8712_uart_base + 5;
-+			stat = *status ;
-+		}
-+
-+		*base = *s;
-+		barrier();
-+
-+		if (*s == '\n') {
-+			stat = *status;
-+			while (!(stat&0x20)) {			// check status
-+				for(i=0;i<0x10;i++)	;
-+				status = (unsigned char*)it8712_uart_base + 5;
-+				stat = *status ;
-+		}
-+
-+			barrier();
-+			*base = '\r';
-+		}
-+		s++;
-+	}
-+
-+#else
-+	while (*s) {
-+		while (!(*UART_LSR(SL2312_UART_BASE) &
-+		         UART_LSR_THRE));
-+		       barrier();
-+
-+		*UART_THR(SL2312_UART_BASE) = *s;
-+
-+		if (*s == '\n') {
-+			while (!(*UART_LSR(SL2312_UART_BASE) &
-+			         UART_LSR_THRE));
-+				barrier();
-+
-+			*UART_THR(SL2312_UART_BASE) = '\r';
-+		}
-+		s++;
-+	}
-+#endif
-+}
-+
-+/*
-+ * nothing to do
-+ */
-+#define arch_decomp_setup()
-+
-+#define arch_decomp_wdog()
---- /dev/null
-+++ b/include/asm-arm/arch-sl2312/vmalloc.h
-@@ -0,0 +1,36 @@
-+/*
-+ *  linux/include/asm-arm/arch-epxa10db/vmalloc.h
-+ *
-+ *  Copyright (C) 2000 Russell King.
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
-+ */
-+
-+/*
-+ * Just any arbitrary offset to the start of the vmalloc VM area: the
-+ * current 8MB value just means that there will be a 8MB "hole" after the
-+ * physical memory until the kernel virtual memory starts.  That means that
-+ * any out-of-bounds memory accesses will hopefully be caught.
-+ * The vmalloc() routines leaves a hole of 4kB between each vmalloced
-+ * area for the same reason. ;)
-+ */
-+#define VMALLOC_OFFSET	  (8*1024*1024)
-+#define VMALLOC_START	  (((unsigned long)high_memory + VMALLOC_OFFSET) & ~(VMALLOC_OFFSET-1))
-+#define VMALLOC_VMADDR(x) ((unsigned long)(x))
-+#define VMALLOC_END       (PAGE_OFFSET + 0x10000000)
-+
-+//#define MODULE_START    (PAGE_OFFSET - 16*1048576)
-+//#define MODULE_END      (PAGE_OFFSET)
-+
---- /dev/null
-+++ b/include/asm-arm/arch-sl2312/watchdog.h
-@@ -0,0 +1,58 @@
-+#ifndef __WATCHDOG_H
-+#define __WATCHDOG_H
-+
-+#define WATCHDOG_BASE		          (IO_ADDRESS (SL2312_WAQTCHDOG_BASE))
-+#define WATCHDOG_COUNTER                  (WATCHDOG_BASE + 0x00)
-+#define WATCHDOG_LOAD                     (WATCHDOG_BASE + 0x04)
-+#define WATCHDOG_RESTART                  (WATCHDOG_BASE + 0x08)
-+#define WATCHDOG_CR                       (WATCHDOG_BASE + 0x0C)
-+#define WATCHDOG_STATUS                   (WATCHDOG_BASE + 0x10)
-+#define WATCHDOG_CLEAR                    (WATCHDOG_BASE + 0x14)
-+#define WATCHDOG_INTRLEN                  (WATCHDOG_BASE + 0x18)
-+
-+#define WATCHDOG_WDENABLE_MSK 		  (0x00000001)
-+#define WATCHDOG_WDENABLE_OFST 		  (0)
-+#define WATCHDOG_WDRST_MSK  		  (0x00000002)
-+#define WATCHDOG_WDRST_OFST 		  (1)
-+#define WATCHDOG_WDINTR_MSK 		  (0x00000004)
-+#define WATCHDOG_WDINTR_OFST 		  (2)
-+#define WATCHDOG_WDEXT_MSK 		  (0x00000008)
-+#define WATCHDOG_WDEXT_OFST 		  (3)
-+#define WATCHDOG_WDCLOCK_MSK 		  (0x00000010)
-+#define WATCHDOG_WDCLOCK_OFST 		  (4)
-+#define WATCHDOG_CR_MASK                  (0x0000001F)
-+
-+#define WATCHDOG_CLEAR_STATUS             0x1
-+#define WATCHDOG_ENABLE                   1
-+#define WATCHDOG_DISABLE                  0
-+#define WATCHDOG_RESTART_VALUE            0x5AB9
-+
-+#define WATCHDOG_MINOR	                  130
-+
-+#define WATCHDOG_IOCTRL_DISABLE	          0x01
-+#define WATCHDOG_IOCTRL_SETTIME	          0x02
-+#define WATCHDOG_IOCTRL_ENABLE	          0x03
-+#define WATCHDOG_IOCTRL_RESTART	          0x04
-+
-+#define WATCHDOG_TIMEOUT_SCALE            APB_CLK
-+#define WATCHDOG_TIMEOUT_MARGIN           30
-+#define WATCHDOG_DRIVER_OPEN              1
-+#define WATCHDOG_DRIVER_CLOSE             0
-+
-+
-+static void     watchdog_disable(void);
-+static void     watchdog_enable(void);
-+static int      watchdog_open(struct inode *, struct file *);
-+static int      watchdog_release(struct inode *, struct file *);
-+static ssize_t  watchdog_read(struct file *, char *, size_t, loff_t *);
-+static ssize_t  watchdog_write(struct file *, const char *, size_t, loff_t *);
-+static int      watchdog_ioctl(struct inode *, struct file *, unsigned int, unsigned long);
-+#ifdef WATCHDOG_TEST
-+static void watchdog_fire(int, void *, struct pt_regs *);
-+#endif
-+
-+
-+
-+
-+
-+#endif
---- /dev/null
-+++ b/include/asm-arm/arch-sl2312/xor.h
-@@ -0,0 +1,29 @@
-+/*
-+ * include/asm-arm/arch-sl2312/xor.h
-+ *
-+ * Copyright (C) 2005 Storlink Corp.
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ */
-+
-+#ifndef _ASM_ARCH_XOR_H
-+#define _ASM_ARCH_XOR_H
-+
-+/*
-+ * Function prototypes
-+ */
-+void xor_gemini_2(unsigned long bytes, unsigned long *p1, unsigned long *p2);
-+
-+void xor_gemini_3(unsigned long bytes, unsigned long *p1, unsigned long *p2,
-+		             unsigned long *p3);
-+
-+void xor_gemini_4(unsigned long bytes, unsigned long *p1, unsigned long *p2,
-+		             unsigned long *p3, unsigned long *p4);
-+
-+void xor_gemini_5(unsigned long bytes, unsigned long *p1, unsigned long *p2,
-+		             unsigned long *p3, unsigned long *p4, unsigned long *p5);
-+
-+#endif /* _ASM_ARCH_XOR_H */
-+
---- a/include/asm-arm/cacheflush.h
-+++ b/include/asm-arm/cacheflush.h
-@@ -46,6 +46,18 @@
- # define MULTI_CACHE 1
- #endif
- 
-+/***********************************************************************
-+ *             Storlink SoC -- Cache
-+ ***********************************************************************/
-+#if defined(CONFIG_CPU_FA526)
-+# ifdef _CACHE
-+#  define MULTI_CACHE 1
-+# else
-+#  define _CACHE fa
-+# endif
-+#endif
-+/***********************************************************************/
-+
- #if defined(CONFIG_CPU_ARM926T)
- # ifdef _CACHE
- #  define MULTI_CACHE 1
---- a/include/asm-arm/page.h
-+++ b/include/asm-arm/page.h
-@@ -74,6 +74,18 @@
- # endif
- #endif
- 
-+/***********************************************************************
-+ *             Storlink SoC -- flash
-+ ***********************************************************************/
-+#ifdef CONFIG_CPU_COPY_FA
-+# ifdef _USER
-+#  define MULTI_USER 1
-+# else
-+#  define _USER fa
-+# endif
-+#endif
-+/***********************************************************************/
-+
- #ifdef CONFIG_CPU_SA1100
- # ifdef _USER
- #  define MULTI_USER 1
---- a/include/asm-arm/proc-fns.h
-+++ b/include/asm-arm/proc-fns.h
-@@ -89,6 +89,14 @@
- #   define CPU_NAME cpu_arm922
- #  endif
- # endif
-+# ifdef CONFIG_CPU_FA526
-+#  ifdef CPU_NAME
-+#   undef  MULTI_CPU
-+#   define MULTI_CPU
-+#  else
-+#   define CPU_NAME cpu_fa526
-+#  endif
-+# endif
- # ifdef CONFIG_CPU_ARM925T
- #  ifdef CPU_NAME
- #   undef  MULTI_CPU
---- a/include/asm-arm/tlbflush.h
-+++ b/include/asm-arm/tlbflush.h
-@@ -39,6 +39,8 @@
- #define TLB_V6_D_ASID	(1 << 17)
- #define TLB_V6_I_ASID	(1 << 18)
- 
-+#define TLB_DINVAL      (1 << 28)
-+#define TLB_BTB         (1 << 29)
- #define TLB_DCLEAN	(1 << 30)
- #define TLB_WB		(1 << 31)
- 
-@@ -52,6 +54,7 @@
-  *	  v4wb  - ARMv4 with write buffer without I TLB flush entry instruction
-  *	  v4wbi - ARMv4 with write buffer with I TLB flush entry instruction
-  *	  v6wbi - ARMv6 with write buffer with I TLB flush entry instruction
-+ *    fa    - ARMv4 with write buffer with UTLB and branch target buffer (BTB)
-  */
- #undef _TLB
- #undef MULTI_TLB
-@@ -86,6 +89,44 @@
- # define v4_always_flags	(-1UL)
- #endif
- 
-+#ifdef CONFIG_CPU_FA_BTB
-+#define __TLB_BTB      TLB_BTB
-+#else
-+#define __TLB_BTB      0
-+#endif
-+
-+#ifdef CONFIG_CPU_FA_WB_DISABLE
-+#define __TLB_WB       0
-+#else
-+#define __TLB_WB       TLB_WB
-+#endif
-+
-+/* Fix buggy CPU which doesn't invalidate Dcache properly */
-+#ifdef CONFIG_CPU_FA520
-+#define __TLB_DINVAL   TLB_DINVAL
-+#elif defined(CONFIG_CPU_FA526)
-+//#define __TLB_DINVAL   TLB_DINVAL
-+#define __TLB_DINVAL   0
-+#else
-+#define __TLB_DINVAL   0
-+#endif
-+
-+#define fa_tlb_flags	(__TLB_WB | __TLB_BTB | __TLB_DINVAL | TLB_DCLEAN | \
-+                         TLB_V4_U_FULL | TLB_V4_U_PAGE)
-+
-+#ifdef CONFIG_CPU_TLB_FA
-+# define fa_possible_flags	fa_tlb_flags
-+# define fa_always_flags	fa_tlb_flags
-+# ifdef _TLB
-+#  define MULTI_TLB 1
-+# else
-+#  define _TLB fa
-+# endif
-+#else
-+# define fa_possible_flags	0
-+# define fa_always_flags	(-1UL)
-+#endif
-+
- #define v4wbi_tlb_flags	(TLB_WB | TLB_DCLEAN | \
- 			 TLB_V4_I_FULL | TLB_V4_D_FULL | \
- 			 TLB_V4_I_PAGE | TLB_V4_D_PAGE)
-@@ -246,12 +287,14 @@
- 				 v4_possible_flags | \
- 				 v4wbi_possible_flags | \
- 				 v4wb_possible_flags | \
-+                 fa_possible_flags | \
- 				 v6wbi_possible_flags)
- 
- #define always_tlb_flags	(v3_always_flags & \
- 				 v4_always_flags & \
- 				 v4wbi_always_flags & \
- 				 v4wb_always_flags & \
-+                 fa_always_flags & \
- 				 v6wbi_always_flags)
- 
- #define tlb_flag(f)	((always_tlb_flags & (f)) || (__tlb_flag & possible_tlb_flags & (f)))
-@@ -261,6 +304,9 @@
- 	const int zero = 0;
- 	const unsigned int __tlb_flag = __cpu_tlb_flags;
- 
-+	if (tlb_flag(TLB_DINVAL))
-+	        asm("mcr%? p15, 0, %0, c7, c14, 0" : : "r" (zero));
-+
- 	if (tlb_flag(TLB_WB))
- 		dsb();
- 
-@@ -281,6 +327,13 @@
- 		dsb();
- 		isb();
- 	}
-+
-+	if (tlb_flag(TLB_BTB))
-+	{
-+        asm("mcr%? p15, 0, %0, c7, c5, 6" : : "r" (zero));
-+		asm("mov r0, r0" : : );
-+		asm("mov r0, r0" : : );
-+	}
- }
- 
- static inline void local_flush_tlb_mm(struct mm_struct *mm)
-@@ -289,6 +342,9 @@
- 	const int asid = ASID(mm);
- 	const unsigned int __tlb_flag = __cpu_tlb_flags;
- 
-+	if (tlb_flag(TLB_DINVAL))
-+	        asm("mcr%? p15, 0, %0, c7, c14, 0" : : "r" (zero));
-+
- 	if (tlb_flag(TLB_WB))
- 		dsb();
- 
-@@ -317,6 +373,14 @@
- 		asm("mcr p15, 0, %0, c7, c5, 6" : : "r" (zero) : "cc");
- 		dsb();
- 	}
-+
-+	if (tlb_flag(TLB_BTB))
-+	{
-+        asm("mcr%? p15, 0, %0, c7, c5, 6" : : "r" (zero));
-+		asm("mov r0, r0" : : );
-+		asm("mov r0, r0" : : );
-+	}
-+
- }
- 
- static inline void
-@@ -327,6 +391,9 @@
- 
- 	uaddr = (uaddr & PAGE_MASK) | ASID(vma->vm_mm);
- 
-+	if (tlb_flag(TLB_DINVAL))
-+        asm("mcr%? p15, 0, %0, c7, c14, 0" : : "r" (zero)); // clean & invalidate data cache all
-+
- 	if (tlb_flag(TLB_WB))
- 		dsb();
- 
-@@ -357,6 +424,13 @@
- 		asm("mcr p15, 0, %0, c7, c5, 6" : : "r" (zero) : "cc");
- 		dsb();
- 	}
-+
-+	if (tlb_flag(TLB_BTB))
-+	{
-+        asm("mcr%? p15, 0, %0, c7, c5, 6" : : "r" (zero));
-+		asm("mov r0, r0" : : );
-+		asm("mov r0, r0" : : );
-+	}
- }
- 
- static inline void local_flush_tlb_kernel_page(unsigned long kaddr)
-@@ -366,6 +440,9 @@
- 
- 	kaddr &= PAGE_MASK;
- 
-+	if (tlb_flag(TLB_DINVAL))
-+        asm("mcr%? p15, 0, %0, c7, c14, 0" : : "r" (zero));
-+
- 	if (tlb_flag(TLB_WB))
- 		dsb();
- 
-@@ -386,6 +463,12 @@
- 		asm("mcr p15, 0, %0, c8, c6, 1" : : "r" (kaddr) : "cc");
- 	if (tlb_flag(TLB_V6_I_PAGE))
- 		asm("mcr p15, 0, %0, c8, c5, 1" : : "r" (kaddr) : "cc");
-+	if (tlb_flag(TLB_BTB))
-+	{
-+        asm("mcr%? p15, 0, %0, c7, c5, 6" : : "r" (zero));
-+		asm("mov r0, r0" : : );
-+		asm("mov r0, r0" : : );
-+	}
- 
- 	if (tlb_flag(TLB_V6_I_FULL | TLB_V6_D_FULL |
- 		     TLB_V6_I_PAGE | TLB_V6_D_PAGE |
-@@ -412,6 +495,7 @@
-  */
- static inline void flush_pmd_entry(pmd_t *pmd)
- {
-+	const unsigned int zero = 0;
- 	const unsigned int __tlb_flag = __cpu_tlb_flags;
- 
- 	if (tlb_flag(TLB_DCLEAN))
-@@ -419,15 +503,30 @@
- 			: : "r" (pmd) : "cc");
- 	if (tlb_flag(TLB_WB))
- 		dsb();
-+
-+	if (tlb_flag(TLB_BTB)) // Luke Lee 05/16/2005
-+	{
-+        asm("mcr%? p15, 0, %0, c7, c5, 6" : : "r" (zero));
-+		asm("mov r0, r0" : : );
-+		asm("mov r0, r0" : : );
-+	}
- }
- 
- static inline void clean_pmd_entry(pmd_t *pmd)
- {
-+    const unsigned int zero = 0; // Luke Lee 05/16/2005 ins 1
- 	const unsigned int __tlb_flag = __cpu_tlb_flags;
- 
- 	if (tlb_flag(TLB_DCLEAN))
- 		asm("mcr	p15, 0, %0, c7, c10, 1	@ flush_pmd"
- 			: : "r" (pmd) : "cc");
-+
-+	if (tlb_flag(TLB_BTB)) // Luke Lee 05/16/2005
-+	{
-+        asm("mcr%? p15, 0, %0, c7, c5, 6" : : "r" (zero));
-+		asm("mov r0, r0" : : );
-+		asm("mov r0, r0" : : );
-+	}
- }
- 
- #undef tlb_flag
---- a/include/asm-arm/xor.h
-+++ b/include/asm-arm/xor.h
-@@ -139,3 +139,18 @@
- 		xor_speed(&xor_block_8regs);	\
- 		xor_speed(&xor_block_32regs);	\
- 	} while (0)
-+
-+#ifdef CONFIG_GEMINI_XOR_ACCE
-+#include 
-+static struct xor_block_template xor_block_gemini = {
-+	.name	= "gemini xor acceleration",
-+	.do_2	= xor_gemini_2,
-+	.do_3	= xor_gemini_3,
-+	.do_4	= xor_gemini_4,
-+	.do_5	= xor_gemini_5,};
-+#undef XOR_TRY_TEMPLATES
-+#define XOR_TRY_TEMPLATES			\
-+	do {					\
-+	xor_speed(&xor_block_gemini); \
-+	} while (0)
-+#endif
---- a/include/linux/apm_bios.h
-+++ b/include/linux/apm_bios.h
-@@ -217,4 +217,24 @@
- #define APM_IOC_STANDBY		_IO('A', 1)
- #define APM_IOC_SUSPEND		_IO('A', 2)
- 
-+// add by jason for power control
-+struct pwc_ioctl_data {
-+	unsigned int action;	// sword struct
-+	unsigned int data;	// stand shutdown time for PWC_SET_SHUT_TIME
-+				// stand shutdown source for PWC_WAIT_BTN
-+};
-+
-+#define POWEROFF		0x01
-+#define RESTORE_DEFAULT	0x02
-+#define SYSTEM_REBOOT	0x04
-+
-+#define PWR_SRC_CIR		0x10
-+#define PWR_SRC_RTC		0x20
-+#define PWR_SRC_BTN		0x40
-+
-+#define	PWC_IOCTL_BASE			'A'				// use linux APM ioctl
-+#define PWC_SET_SHUT_TIME		_IOW('A', 16, struct pwc_ioctl_data)
-+#define PWC_WAIT_BTN			_IOR('A', 17, struct pwc_ioctl_data)
-+#define PWC_SHUTDOWN			_IO ('A', 18)
-+
- #endif	/* LINUX_APM_H */
---- a/kernel/time.c
-+++ b/kernel/time.c
-@@ -76,6 +76,7 @@
-  * why not move it into the appropriate arch directory (for those
-  * architectures that need it).
-  */
-+extern void rtc_set_time_second(unsigned int second);
-  
- asmlinkage long sys_stime(time_t __user *tptr)
- {
-@@ -87,6 +88,10 @@
- 
- 	tv.tv_nsec = 0;
- 
-+#ifdef CONFIG_SL2312_RTC
-+    rtc_set_time_second(tv.tv_sec);
-+#endif
-+
- 	err = security_settime(&tv, NULL);
- 	if (err)
- 		return err;
diff --git a/target/linux/storm/patches/1002-gmac.patch b/target/linux/storm/patches/1002-gmac.patch
deleted file mode 100644
index d6632ba381..0000000000
--- a/target/linux/storm/patches/1002-gmac.patch
+++ /dev/null
@@ -1,18615 +0,0 @@
---- /dev/null
-+++ b/drivers/net/sl2312_emac.c
-@@ -0,0 +1,4604 @@
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+
-+#define BIG_ENDIAN  	0
-+
-+#define GMAC_DEBUG      0
-+
-+#define GMAC_PHY_IF     2
-+
-+/* define PHY address */
-+#define HPHY_ADDR   0x01
-+#define GPHY_ADDR   0x02
-+
-+#define CONFIG_ADM_6999 1
-+/* define chip information */
-+#define DRV_NAME			"SL2312"
-+#define DRV_VERSION			"0.1.1"
-+#define SL2312_DRIVER_NAME  DRV_NAME " Fast Ethernet driver " DRV_VERSION
-+
-+/* define TX/RX descriptor parameter */
-+#define MAX_ETH_FRAME_SIZE	1920
-+#define TX_BUF_SIZE			MAX_ETH_FRAME_SIZE
-+#define TX_DESC_NUM			128
-+#define TX_BUF_TOT_LEN		(TX_BUF_SIZE * TX_DESC_NUM)
-+#define RX_BUF_SIZE			MAX_ETH_FRAME_SIZE
-+#define RX_DESC_NUM			256
-+#define RX_BUF_TOT_LEN		(RX_BUF_SIZE * RX_DESC_NUM)
-+#define MAX_ISR_WORK        20
-+
-+unsigned int int_status = 0;
-+
-+/* define GMAC base address */
-+#define GMAC_PHYSICAL_BASE_ADDR	    (SL2312_GMAC_BASE)
-+#define GMAC_BASE_ADDR			    (IO_ADDRESS(GMAC_PHYSICAL_BASE_ADDR))
-+#define GMAC_GLOBAL_BASE_ADDR       (IO_ADDRESS(SL2312_GLOBAL_BASE))
-+
-+#define GMAC0_BASE                  (IO_ADDRESS(SL2312_GMAC0_BASE))
-+#define GMAC1_BASE                  (IO_ADDRESS(SL2312_GMAC1_BASE))
-+
-+/* memory management utility */
-+#define DMA_MALLOC(size,handle)		pci_alloc_consistent(NULL,size,handle)
-+#define DMA_MFREE(mem,size,handle)	pci_free_consistent(NULL,size,mem,handle)
-+
-+//#define gmac_read_reg(offset)       (readl(GMAC_BASE_ADDR + offset))
-+//#define gmac_write_reg(offset,data,mask)  writel( (gmac_read_reg(offset)&~mask) |(data&mask),(GMAC_BASE_ADDR+offset))
-+
-+/* define owner bit */
-+#define CPU		0
-+#define DMA		1
-+
-+#define ACTIVE      1
-+#define NONACTIVE   0
-+
-+#define CONFIG_SL_NAPI
-+
-+#ifndef CONFIG_SL2312_MPAGE
-+#define CONFIG_SL2312_MPAGE
-+#endif
-+
-+#ifdef CONFIG_SL2312_MPAGE
-+#include 
-+#include 
-+#include 
-+#endif
-+
-+#ifndef CONFIG_TXINT_DISABLE
-+//#define CONFIG_TXINT_DISABLE
-+#endif
-+
-+enum phy_state
-+{
-+    LINK_DOWN   = 0,
-+    LINK_UP     = 1
-+};
-+
-+
-+/* transmit timeout value */
-+#define TX_TIMEOUT  (6*HZ)
-+
-+/***************************************/
-+/* the offset address of GMAC register */
-+/***************************************/
-+enum GMAC_REGISTER {
-+	GMAC_STA_ADD0 	= 0x0000,
-+	GMAC_STA_ADD1	= 0x0004,
-+	GMAC_STA_ADD2	= 0x0008,
-+	GMAC_RX_FLTR	= 0x000c,
-+	GMAC_MCAST_FIL0 = 0x0010,
-+	GMAC_MCAST_FIL1 = 0x0014,
-+	GMAC_CONFIG0	= 0x0018,
-+	GMAC_CONFIG1	= 0x001c,
-+	GMAC_CONFIG2	= 0x0020,
-+	GMAC_BNCR		= 0x0024,
-+	GMAC_RBNR		= 0x0028,
-+	GMAC_STATUS		= 0x002c,
-+	GMAC_IN_DISCARDS= 0x0030,
-+	GMAC_IN_ERRORS  = 0x0034,
-+	GMAC_IN_MCAST   = 0x0038,
-+	GMAC_IN_BCAST   = 0x003c,
-+	GMAC_IN_MAC1    = 0x0040,
-+	GMAC_IN_MAC2    = 0x0044
-+};
-+
-+/*******************************************/
-+/* the offset address of GMAC DMA register */
-+/*******************************************/
-+enum GMAC_DMA_REGISTER {
-+	GMAC_DMA_DEVICE_ID		= 0xff00,
-+	GMAC_DMA_STATUS			= 0xff04,
-+	GMAC_TXDMA_CTRL 	 	= 0xff08,
-+	GMAC_TXDMA_FIRST_DESC 	= 0xff0c,
-+	GMAC_TXDMA_CURR_DESC	= 0xff10,
-+	GMAC_RXDMA_CTRL			= 0xff14,
-+	GMAC_RXDMA_FIRST_DESC	= 0xff18,
-+	GMAC_RXDMA_CURR_DESC	= 0xff1c,
-+};
-+
-+/*******************************************/
-+/* the register structure of GMAC          */
-+/*******************************************/
-+typedef union
-+{
-+	unsigned int bits32;
-+	struct bit1_0004
-+	{
-+#if (BIG_ENDIAN==1)
-+		unsigned int sta_add2_l16	: 16;	/* station MAC address2 bits 15 to 0 */
-+		unsigned int sta_add1_h16	: 16;	/* station MAC address1 bits 47 to 32 */
-+#else
-+		unsigned int sta_add1_h16	: 16;	/* station MAC address1 bits 47 to 32 */
-+		unsigned int sta_add2_l16	: 16;	/* station MAC address2 bits 15 to 0 */
-+#endif
-+	} bits;
-+} GMAC_STA_ADD1_T;
-+
-+typedef union
-+{
-+	unsigned int bits32;
-+	struct bit1_000c
-+	{
-+#if (BIG_ENDIAN==1)
-+		unsigned int 				: 27;
-+		unsigned int error			:  1;	/* enable receive of all error frames */
-+		unsigned int promiscuous	:  1;   /* enable receive of all frames */
-+		unsigned int broadcast		:  1;	/* enable receive of broadcast frames */
-+		unsigned int multicast		:  1;	/* enable receive of multicast frames that pass multicast filter */
-+		unsigned int unicast		:  1;	/* enable receive of unicast frames that are sent to STA address */
-+#else
-+		unsigned int unicast		:  1;	/* enable receive of unicast frames that are sent to STA address */
-+		unsigned int multicast		:  1;	/* enable receive of multicast frames that pass multicast filter */
-+		unsigned int broadcast		:  1;	/* enable receive of broadcast frames */
-+		unsigned int promiscuous	:  1;   /* enable receive of all frames */
-+		unsigned int error			:  1;	/* enable receive of all error frames */
-+		unsigned int 				: 27;
-+#endif
-+	} bits;
-+} GMAC_RX_FLTR_T;
-+
-+typedef union
-+{
-+	unsigned int bits32;
-+	struct bit1_0018
-+	{
-+#if (BIG_ENDIAN==1)
-+		unsigned int : 10;
-+		unsigned int inv_rx_clk     : 1;	/* Inverse RX Clock */
-+		unsigned int rising_latch   : 1;
-+        unsigned int rx_tag_remove  :  1;   /* Remove Rx VLAN tag */
-+        unsigned int ipv6_tss_rx_en :  1;   /* IPv6 TSS RX enable */
-+        unsigned int ipv4_tss_rx_en :  1;   /* IPv4 TSS RX enable */
-+        unsigned int rgmii_en       :  1;   /* RGMII in-band status enable */
-+		unsigned int tx_fc_en		:  1;	/* TX flow control enable */
-+		unsigned int rx_fc_en		:  1;	/* RX flow control enable */
-+		unsigned int sim_test		:  1;	/* speed up timers in simulation */
-+		unsigned int dis_col		:  1;	/* disable 16 collisions abort function */
-+		unsigned int dis_bkoff		:  1;	/* disable back-off function */
-+		unsigned int max_len		:  3;	/* maximum receive frame length allowed */
-+		unsigned int adj_ifg		:  4;	/* adjust IFG from 96+/-56 */
-+        unsigned int                :  1;   /* reserved */
-+		unsigned int loop_back		:  1;	/* transmit data loopback enable */
-+		unsigned int dis_rx			:  1;	/* disable receive */
-+		unsigned int dis_tx			:  1;	/* disable transmit */
-+#else
-+		unsigned int dis_tx			:  1;	/* disable transmit */
-+		unsigned int dis_rx			:  1;	/* disable receive */
-+		unsigned int loop_back		:  1;	/* transmit data loopback enable */
-+        unsigned int                :  1;   /* reserved */
-+		unsigned int adj_ifg		:  4;	/* adjust IFG from 96+/-56 */
-+		unsigned int max_len		:  3;	/* maximum receive frame length allowed */
-+		unsigned int dis_bkoff		:  1;	/* disable back-off function */
-+		unsigned int dis_col		:  1;	/* disable 16 collisions abort function */
-+		unsigned int sim_test		:  1;	/* speed up timers in simulation */
-+		unsigned int rx_fc_en		:  1;	/* RX flow control enable */
-+		unsigned int tx_fc_en		:  1;	/* TX flow control enable */
-+        unsigned int rgmii_en       :  1;   /* RGMII in-band status enable */
-+        unsigned int ipv4_tss_rx_en :  1;   /* IPv4 TSS RX enable */
-+        unsigned int ipv6_tss_rx_en :  1;   /* IPv6 TSS RX enable */
-+        unsigned int rx_tag_remove  :  1;   /* Remove Rx VLAN tag */
-+		unsigned int rising_latch   :  1;
-+		unsigned int inv_rx_clk : 1;	/* Inverse RX Clock */
-+		unsigned int : 10;
-+#endif
-+	} bits;
-+} GMAC_CONFIG0_T;
-+
-+typedef union
-+{
-+	unsigned int bits32;
-+	struct bit1_001c
-+	{
-+#if (BIG_ENDIAN==1)
-+		unsigned int 				: 28;
-+		unsigned int buf_size		:  4; 	/* per packet buffer size */
-+#else
-+		unsigned int buf_size		:  4; 	/* per packet buffer size */
-+		unsigned int 				: 28;
-+#endif
-+	} bits;
-+} GMAC_CONFIG1_T;
-+
-+typedef union
-+{
-+	unsigned int bits32;
-+	struct bit1_0020
-+	{
-+#if (BIG_ENDIAN==1)
-+		unsigned int rel_threshold	: 16;	/* flow control release threshold */
-+		unsigned int set_threshold	: 16; 	/* flow control set threshold */
-+#else
-+		unsigned int set_threshold	: 16; 	/* flow control set threshold */
-+		unsigned int rel_threshold	: 16;	/* flow control release threshold */
-+#endif
-+	} bits;
-+} GMAC_CONFIG2_T;
-+
-+typedef union
-+{
-+	unsigned int bits32;
-+	struct bit1_0024
-+	{
-+#if (BIG_ENDIAN==1)
-+		unsigned int 				: 16;
-+		unsigned int buf_num		: 16; 	/* return buffer number from software */
-+#else
-+		unsigned int buf_num		: 16; 	/* return buffer number from software */
-+		unsigned int 				: 16;
-+#endif
-+	} bits;
-+} GMAC_BNCR_T;
-+
-+typedef union
-+{
-+	unsigned int bits32;
-+	struct bit1_0028
-+	{
-+#if (BIG_ENDIAN==1)
-+		unsigned int				: 16;
-+		unsigned int buf_remain		: 16;	/* remaining buffer number */
-+#else
-+		unsigned int buf_remain		: 16;	/* remaining buffer number */
-+		unsigned int				: 16;
-+#endif
-+	} bits;
-+} GMAC_RBNR_T;
-+
-+typedef union
-+{
-+	unsigned int bits32;
-+	struct bit1_002c
-+	{
-+#if (BIG_ENDIAN==1)
-+		unsigned int 				: 25;
-+		unsigned int mii_rmii		:  2;   /* PHY interface type */
-+		unsigned int phy_mode		:  1;	/* PHY interface mode in 10M-bps */
-+		unsigned int duplex			:  1;	/* duplex mode */
-+		unsigned int speed			:  2;	/* link speed(00->2.5M 01->25M 10->125M) */
-+		unsigned int link			:  1;	/* link status */
-+#else
-+		unsigned int link			:  1;	/* link status */
-+		unsigned int speed			:  2;	/* link speed(00->2.5M 01->25M 10->125M) */
-+		unsigned int duplex			:  1;	/* duplex mode */
-+		unsigned int phy_mode		:  1;	/* PHY interface mode in 10M-bps */
-+		unsigned int mii_rmii		:  2;   /* PHY interface type */
-+		unsigned int 				: 25;
-+#endif
-+	} bits;
-+} GMAC_STATUS_T;
-+
-+
-+typedef union
-+{
-+	unsigned int bits32;
-+	struct bit1_009
-+	{
-+#if (BIG_ENDIAN==1)
-+		unsigned int 				: 10;
-+		unsigned int tx_fail		:  1; 	/* Tx fail interrupt */
-+		unsigned int cnt_full		:  1;	/* MIB counters half full interrupt */
-+		unsigned int rx_pause_on	:  1;	/* received pause on frame interrupt */
-+		unsigned int tx_pause_on	:  1;	/* transmit pause on frame interrupt */
-+		unsigned int rx_pause_off   :  1;	/* received pause off frame interrupt */
-+		unsigned int tx_pause_off	:  1;	/* received pause off frame interrupt */
-+		unsigned int rx_overrun		:  1;   /* GMAC Rx FIFO overrun interrupt */
-+		unsigned int tx_underrun	:  1;	/* GMAC Tx FIFO underrun interrupt */
-+		unsigned int				:  6;
-+		unsigned int m_tx_fail 		:  1;	/* Tx fail interrupt mask */
-+		unsigned int m_cnt_full		:  1;	/* MIB counters half full interrupt mask */
-+		unsigned int m_rx_pause_on	:  1;	/* received pause on frame interrupt mask */
-+		unsigned int m_tx_pause_on  :  1;	/* transmit pause on frame interrupt mask */
-+		unsigned int m_rx_pause_off :  1;	/* received pause off frame interrupt mask */
-+		unsigned int m_tx_pause_off	:  1;	/* received pause off frame interrupt mask */
-+		unsigned int m_rx_overrun	:  1;   /* GMAC Rx FIFO overrun interrupt mask */
-+		unsigned int m_tx_underrun	:  1;	/* GMAC Tx FIFO underrun interrupt mask */
-+#else
-+		unsigned int m_tx_underrun	:  1;	/* GMAC Tx FIFO underrun interrupt mask */
-+		unsigned int m_rx_overrun	:  1;   /* GMAC Rx FIFO overrun interrupt mask */
-+		unsigned int m_tx_pause_off	:  1;	/* received pause off frame interrupt mask */
-+		unsigned int m_rx_pause_off :  1;	/* received pause off frame interrupt mask */
-+		unsigned int m_tx_pause_on  :  1;	/* transmit pause on frame interrupt mask */
-+		unsigned int m_rx_pause_on	:  1;	/* received pause on frame interrupt mask */
-+		unsigned int m_cnt_full		:  1;	/* MIB counters half full interrupt mask */
-+		unsigned int m_tx_fail 		:  1;	/* Tx fail interrupt mask */
-+		unsigned int				:  6;
-+		unsigned int tx_underrun	:  1;	/* GMAC Tx FIFO underrun interrupt */
-+		unsigned int rx_overrun		:  1;   /* GMAC Rx FIFO overrun interrupt */
-+		unsigned int tx_pause_off	:  1;	/* received pause off frame interrupt */
-+		unsigned int rx_pause_off   :  1;	/* received pause off frame interrupt */
-+		unsigned int tx_pause_on	:  1;	/* transmit pause on frame interrupt */
-+		unsigned int rx_pause_on	:  1;	/* received pause on frame interrupt */
-+		unsigned int cnt_full		:  1;	/* MIB counters half full interrupt */
-+		unsigned int tx_fail		:  1; 	/* Tx fail interrupt */
-+		unsigned int 				: 10;
-+#endif
-+	} bits;
-+} GMAC_INT_MASK_T;
-+
-+
-+/*******************************************/
-+/* the register structure of GMAC DMA      */
-+/*******************************************/
-+typedef union
-+{
-+	unsigned int bits32;
-+	struct bit2_ff00
-+	{
-+#if (BIG_ENDIAN==1)
-+		unsigned int                :  7;   /* reserved */
-+		unsigned int s_ahb_err		:  1;	/* Slave AHB bus error */
-+		unsigned int tx_err_code    :  4;   /* TxDMA error code */
-+		unsigned int rx_err_code  	:  4;   /* RxDMA error code */
-+		unsigned int device_id		: 12;
-+		unsigned int revision_id	:  4;
-+#else
-+		unsigned int revision_id	:  4;
-+		unsigned int device_id		: 12;
-+		unsigned int rx_err_code  	:  4;   /* RxDMA error code */
-+		unsigned int tx_err_code    :  4;   /* TxDMA error code */
-+		unsigned int s_ahb_err		:  1;	/* Slave AHB bus error */
-+		unsigned int                :  7;   /* reserved */
-+#endif
-+	} bits;
-+} GMAC_DMA_DEVICE_ID_T;
-+
-+typedef union
-+{
-+	unsigned int bits32;
-+	struct bit2_ff04
-+	{
-+#if (BIG_ENDIAN==1)
-+		unsigned int ts_finish		:  1;	/* finished tx interrupt */
-+		unsigned int ts_derr		:  1;   /* AHB Bus Error while tx */
-+		unsigned int ts_perr		:  1;   /* Tx Descriptor protocol error */
-+		unsigned int ts_eodi		:  1;	/* TxDMA end of descriptor interrupt */
-+		unsigned int ts_eofi		:  1;   /* TxDMA end of frame interrupt */
-+		unsigned int rs_finish		:  1;   /* finished rx interrupt */
-+		unsigned int rs_derr		:  1;   /* AHB Bus Error while rx */
-+		unsigned int rs_perr		:  1;   /* Rx Descriptor protocol error */
-+		unsigned int rs_eodi		:  1;	/* RxDMA end of descriptor interrupt */
-+		unsigned int rs_eofi		:  1;	/* RxDMA end of frame interrupt */
-+		unsigned int        		:  1; 	/* Tx fail interrupt */
-+		unsigned int cnt_full		:  1;	/* MIB counters half full interrupt */
-+		unsigned int rx_pause_on	:  1;	/* received pause on frame interrupt */
-+		unsigned int tx_pause_on	:  1;	/* transmit pause on frame interrupt */
-+		unsigned int rx_pause_off   :  1;	/* received pause off frame interrupt */
-+		unsigned int tx_pause_off	:  1;	/* received pause off frame interrupt */
-+		unsigned int rx_overrun		:  1;   /* GMAC Rx FIFO overrun interrupt */
-+		unsigned int link_change	:  1;	/* GMAC link changed Interrupt for RGMII mode */
-+		unsigned int        		:  1;
-+		unsigned int            	:  1;
-+		unsigned int 				:  3;
-+		unsigned int loop_back		:  1;	/* loopback TxDMA to RxDMA */
-+		unsigned int        		:  1;	/* Tx fail interrupt mask */
-+		unsigned int m_cnt_full		:  1;	/* MIB counters half full interrupt mask */
-+		unsigned int m_rx_pause_on	:  1;	/* received pause on frame interrupt mask */
-+		unsigned int m_tx_pause_on  :  1;	/* transmit pause on frame interrupt mask */
-+		unsigned int m_rx_pause_off :  1;	/* received pause off frame interrupt mask */
-+		unsigned int m_tx_pause_off	:  1;	/* received pause off frame interrupt mask */
-+		unsigned int m_rx_overrun	:  1;   /* GMAC Rx FIFO overrun interrupt mask */
-+		unsigned int m_link_change	:  1;	/* GMAC link changed Interrupt mask for RGMII mode */
-+#else
-+		unsigned int m_link_change	:  1;	/* GMAC link changed Interrupt mask for RGMII mode */
-+		unsigned int m_rx_overrun	:  1;   /* GMAC Rx FIFO overrun interrupt mask */
-+		unsigned int m_tx_pause_off	:  1;	/* received pause off frame interrupt mask */
-+		unsigned int m_rx_pause_off :  1;	/* received pause off frame interrupt mask */
-+		unsigned int m_tx_pause_on  :  1;	/* transmit pause on frame interrupt mask */
-+		unsigned int m_rx_pause_on	:  1;	/* received pause on frame interrupt mask */
-+		unsigned int m_cnt_full		:  1;	/* MIB counters half full interrupt mask */
-+		unsigned int         		:  1;	/* Tx fail interrupt mask */
-+		unsigned int loop_back		:  1;	/* loopback TxDMA to RxDMA */
-+		unsigned int 				:  3;
-+		unsigned int            	:  1;
-+		unsigned int        		:  1;
-+		unsigned int link_change	:  1;	/* GMAC link changed Interrupt for RGMII mode */
-+		unsigned int rx_overrun		:  1;   /* GMAC Rx FIFO overrun interrupt */
-+		unsigned int tx_pause_off	:  1;	/* received pause off frame interrupt */
-+		unsigned int rx_pause_off   :  1;	/* received pause off frame interrupt */
-+		unsigned int tx_pause_on	:  1;	/* transmit pause on frame interrupt */
-+		unsigned int rx_pause_on	:  1;	/* received pause on frame interrupt */
-+		unsigned int cnt_full		:  1;	/* MIB counters half full interrupt */
-+		unsigned int        		:  1; 	/* Tx fail interrupt */
-+		unsigned int rs_eofi		:  1;	/* RxDMA end of frame interrupt */
-+		unsigned int rs_eodi		:  1;	/* RxDMA end of descriptor interrupt */
-+		unsigned int rs_perr		:  1;   /* Rx Descriptor protocol error */
-+		unsigned int rs_derr		:  1;   /* AHB Bus Error while rx */
-+		unsigned int rs_finish		:  1;   /* finished rx interrupt */
-+		unsigned int ts_eofi		:  1;   /* TxDMA end of frame interrupt */
-+		unsigned int ts_eodi		:  1;	/* TxDMA end of descriptor interrupt */
-+		unsigned int ts_perr		:  1;   /* Tx Descriptor protocol error */
-+		unsigned int ts_derr		:  1;   /* AHB Bus Error while tx */
-+		unsigned int ts_finish		:  1;	/* finished tx interrupt */
-+#endif
-+	} bits;
-+} GMAC_DMA_STATUS_T;
-+
-+typedef union
-+{
-+	unsigned int bits32;
-+	struct bit2_ff08
-+	{
-+#if (BIG_ENDIAN==1)
-+		unsigned int td_start		:  1;	/* Start DMA transfer */
-+		unsigned int td_continue	:  1;   /* Continue DMA operation */
-+		unsigned int td_chain_mode	:  1;	/* Descriptor Chain Mode;1-Descriptor Chain mode, 0-Direct DMA mode*/
-+		unsigned int 				:  1;
-+		unsigned int td_prot		:  4;	/* TxDMA protection control */
-+		unsigned int td_burst_size  :  2;	/* TxDMA max burst size for every AHB request */
-+		unsigned int td_bus		    :  2;	/* peripheral bus width;0x->8 bits,10->16 bits,11->32 bits */
-+		unsigned int td_endian		:  1;	/* AHB Endian. 0-little endian; 1-big endian */
-+		unsigned int td_finish_en   :  1;	/* DMA Finish Event Interrupt Enable;1-enable;0-mask */
-+		unsigned int td_fail_en 	:  1;	/* DMA Fail Interrupt Enable;1-enable;0-mask */
-+		unsigned int td_perr_en 	:  1;	/* Protocol Failure Interrupt Enable;1-enable;0-mask */
-+		unsigned int td_eod_en  	:  1;	/* End of Descriptor interrupt Enable;1-enable;0-mask */
-+		unsigned int td_eof_en      :  1;   /* End of frame interrupt Enable;1-enable;0-mask */
-+		unsigned int 				: 14;
-+#else
-+		unsigned int 				: 14;
-+		unsigned int td_eof_en      :  1;   /* End of frame interrupt Enable;1-enable;0-mask */
-+		unsigned int td_eod_en  	:  1;	/* End of Descriptor interrupt Enable;1-enable;0-mask */
-+		unsigned int td_perr_en 	:  1;	/* Protocol Failure Interrupt Enable;1-enable;0-mask */
-+		unsigned int td_fail_en 	:  1;	/* DMA Fail Interrupt Enable;1-enable;0-mask */
-+		unsigned int td_finish_en   :  1;	/* DMA Finish Event Interrupt Enable;1-enable;0-mask */
-+		unsigned int td_endian		:  1;	/* AHB Endian. 0-little endian; 1-big endian */
-+		unsigned int td_bus		    :  2;	/* peripheral bus width;0x->8 bits,10->16 bits,11->32 bits */
-+		unsigned int td_burst_size  :  2;	/* TxDMA max burst size for every AHB request */
-+		unsigned int td_prot		:  4;	/* TxDMA protection control */
-+		unsigned int 				:  1;
-+		unsigned int td_chain_mode	:  1;	/* Descriptor Chain Mode;1-Descriptor Chain mode, 0-Direct DMA mode*/
-+		unsigned int td_continue	:  1;   /* Continue DMA operation */
-+		unsigned int td_start		:  1;	/* Start DMA transfer */
-+#endif
-+	} bits;
-+} GMAC_TXDMA_CTRL_T;
-+
-+
-+typedef union
-+{
-+	unsigned int bits32;
-+	struct bit2_ff0c
-+	{
-+#if (BIG_ENDIAN==1)
-+		unsigned int td_first_des_ptr	: 28;/* first descriptor address */
-+		unsigned int td_busy			:  1;/* 1-TxDMA busy; 0-TxDMA idle */
-+		unsigned int 					:  3;
-+#else
-+		unsigned int 					:  3;
-+		unsigned int td_busy			:  1;/* 1-TxDMA busy; 0-TxDMA idle */
-+		unsigned int td_first_des_ptr	: 28;/* first descriptor address */
-+#endif
-+	} bits;
-+} GMAC_TXDMA_FIRST_DESC_T;
-+
-+typedef union
-+{
-+	unsigned int bits32;
-+	struct bit2_ff10
-+	{
-+#if (BIG_ENDIAN==1)
-+		unsigned int ndar			: 28;	/* next descriptor address */
-+		unsigned int eofie			:  1;	/* end of frame interrupt enable */
-+		unsigned int    			:  1;
-+		unsigned int sof_eof		:  2;
-+#else
-+		unsigned int sof_eof		:  2;
-+		unsigned int    			:  1;
-+		unsigned int eofie			:  1;	/* end of frame interrupt enable */
-+		unsigned int ndar			: 28;	/* next descriptor address */
-+#endif
-+	} bits;
-+} GMAC_TXDMA_CURR_DESC_T;
-+
-+
-+typedef union
-+{
-+	unsigned int bits32;
-+	struct bit2_ff14
-+	{
-+#if (BIG_ENDIAN==1)
-+		unsigned int rd_start		:  1;	/* Start DMA transfer */
-+		unsigned int rd_continue	:  1;   /* Continue DMA operation */
-+		unsigned int rd_chain_mode	:  1;	/* Descriptor Chain Mode;1-Descriptor Chain mode, 0-Direct DMA mode*/
-+		unsigned int 				:  1;
-+		unsigned int rd_prot		:  4;	/* DMA protection control */
-+		unsigned int rd_burst_size  :  2;	/* DMA max burst size for every AHB request */
-+		unsigned int rd_bus		    :  2;	/* peripheral bus width;0x->8 bits,10->16 bits,11->32 bits */
-+		unsigned int rd_endian		:  1;	/* AHB Endian. 0-little endian; 1-big endian */
-+		unsigned int rd_finish_en   :  1;	/* DMA Finish Event Interrupt Enable;1-enable;0-mask */
-+		unsigned int rd_fail_en  	:  1;	/* DMA Fail Interrupt Enable;1-enable;0-mask */
-+		unsigned int rd_perr_en 	:  1;	/* Protocol Failure Interrupt Enable;1-enable;0-mask */
-+		unsigned int rd_eod_en  	:  1;	/* End of Descriptor interrupt Enable;1-enable;0-mask */
-+		unsigned int rd_eof_en      :  1;   /* End of frame interrupt Enable;1-enable;0-mask */
-+		unsigned int 				: 14;
-+#else
-+		unsigned int 				: 14;
-+		unsigned int rd_eof_en      :  1;   /* End of frame interrupt Enable;1-enable;0-mask */
-+		unsigned int rd_eod_en  	:  1;	/* End of Descriptor interrupt Enable;1-enable;0-mask */
-+		unsigned int rd_perr_en 	:  1;	/* Protocol Failure Interrupt Enable;1-enable;0-mask */
-+		unsigned int rd_fail_en  	:  1;	/* DMA Fail Interrupt Enable;1-enable;0-mask */
-+		unsigned int rd_finish_en   :  1;	/* DMA Finish Event Interrupt Enable;1-enable;0-mask */
-+		unsigned int rd_endian		:  1;	/* AHB Endian. 0-little endian; 1-big endian */
-+		unsigned int rd_bus		    :  2;	/* peripheral bus width;0x->8 bits,10->16 bits,11->32 bits */
-+		unsigned int rd_burst_size  :  2;	/* DMA max burst size for every AHB request */
-+		unsigned int rd_prot		:  4;	/* DMA protection control */
-+		unsigned int 				:  1;
-+		unsigned int rd_chain_mode	:  1;	/* Descriptor Chain Mode;1-Descriptor Chain mode, 0-Direct DMA mode*/
-+		unsigned int rd_continue	:  1;   /* Continue DMA operation */
-+		unsigned int rd_start		:  1;	/* Start DMA transfer */
-+#endif
-+	} bits;
-+} GMAC_RXDMA_CTRL_T;
-+
-+
-+typedef union
-+{
-+	unsigned int bits32;
-+	struct bit2_ff18
-+	{
-+#if (BIG_ENDIAN==1)
-+		unsigned int rd_first_des_ptr	: 28;/* first descriptor address */
-+		unsigned int rd_busy			:  1;/* 1-RxDMA busy; 0-RxDMA idle */
-+		unsigned int 					:  3;
-+#else
-+		unsigned int 					:  3;
-+		unsigned int rd_busy			:  1;/* 1-RxDMA busy; 0-RxDMA idle */
-+		unsigned int rd_first_des_ptr	: 28;/* first descriptor address */
-+#endif
-+	} bits;
-+} GMAC_RXDMA_FIRST_DESC_T;
-+
-+typedef union
-+{
-+	unsigned int bits32;
-+	struct bit2_ff1c
-+	{
-+#if (BIG_ENDIAN==1)
-+		unsigned int ndar			: 28;	/* next descriptor address */
-+		unsigned int eofie			:  1;	/* end of frame interrupt enable */
-+		unsigned int    			:  1;
-+		unsigned int sof_eof		:  2;
-+#else
-+		unsigned int sof_eof		:  2;
-+		unsigned int    			:  1;
-+		unsigned int eofie			:  1;	/* end of frame interrupt enable */
-+		unsigned int ndar			: 28;	/* next descriptor address */
-+#endif
-+	} bits;
-+} GMAC_RXDMA_CURR_DESC_T;
-+
-+
-+/********************************************/
-+/*          Descriptor Format               */
-+/********************************************/
-+
-+typedef struct descriptor_t
-+{
-+	union frame_control_t
-+	{
-+		unsigned int bits32;
-+		struct bits_0000
-+		{
-+#if (BIG_ENDIAN==1)
-+			unsigned int own 		: 1;	/* owner bit. 0-CPU, 1-DMA */
-+			unsigned int derr		: 1;	/* data error during processing this descriptor */
-+			unsigned int perr		: 1;	/* protocol error during processing this descriptor */
-+			unsigned int csum_state : 3;	/* checksum error status */
-+			unsigned int vlan_tag   : 1;    /* 802.1q vlan tag packet */
-+			unsigned int frame_state: 3;    /* reference Rx Status1 */
-+			unsigned int desc_count : 6;	/* number of descriptors used for the current frame */
-+			unsigned int buffer_size:16;	/* transfer buffer size associated with current description*/
-+#else
-+			unsigned int buffer_size:16;	/* transfer buffer size associated with current description*/
-+			unsigned int desc_count : 6;	/* number of descriptors used for the current frame */
-+			unsigned int frame_state: 3;    /* reference Rx Status1 */
-+			unsigned int vlan_tag   : 1;    /* 802.1q vlan tag packet */
-+			unsigned int csum_state : 3;	/* checksum error status */
-+			unsigned int perr		: 1;	/* protocol error during processing this descriptor */
-+			unsigned int derr		: 1;	/* data error during processing this descriptor */
-+			unsigned int own 		: 1;	/* owner bit. 0-CPU, 1-DMA */
-+#endif
-+		} bits_rx;
-+
-+		struct bits_0001
-+		{
-+#if (BIG_ENDIAN==1)
-+			unsigned int own 		: 1;	/* owner bit. 0-CPU, 1-DMA */
-+			unsigned int derr		: 1;	/* data error during processing this descriptor */
-+			unsigned int perr		: 1;	/* protocol error during processing this descriptor */
-+			unsigned int            : 6;
-+			unsigned int success_tx : 1;    /* successful transmitted */
-+			unsigned int desc_count : 6;	/* number of descriptors used for the current frame */
-+			unsigned int buffer_size:16;	/* transfer buffer size associated with current description*/
-+#else
-+			unsigned int buffer_size:16;	/* transfer buffer size associated with current description*/
-+			unsigned int desc_count : 6;	/* number of descriptors used for the current frame */
-+			unsigned int success_tx : 1;    /* successful transmitted */
-+			unsigned int            : 6;
-+			unsigned int perr		: 1;	/* protocol error during processing this descriptor */
-+			unsigned int derr		: 1;	/* data error during processing this descriptor */
-+			unsigned int own 		: 1;	/* owner bit. 0-CPU, 1-DMA */
-+#endif
-+        } bits_tx_in;
-+
-+		struct bits_0002
-+		{
-+#if (BIG_ENDIAN==1)
-+			unsigned int own 		: 1;	/* owner bit. 0-CPU, 1-DMA */
-+			unsigned int derr		: 1;	/* data error during processing this descriptor */
-+			unsigned int perr		: 1;	/* protocol error during processing this descriptor */
-+			unsigned int            : 2;
-+			unsigned int udp_csum_en: 1;    /* TSS UDP checksum enable */
-+			unsigned int tcp_csum_en: 1;    /* TSS TCP checksum enable */
-+			unsigned int ipv6_tx_en : 1;    /* TSS IPv6 TX enable */
-+			unsigned int ip_csum_en : 1;    /* TSS IPv4 IP Header checksum enable */
-+			unsigned int vlan_enable: 1;    /* VLAN TIC insertion enable */
-+			unsigned int desc_count : 6;	/* number of descriptors used for the current frame */
-+			unsigned int buffer_size:16;	/* transfer buffer size associated with current description*/
-+#else
-+			unsigned int buffer_size:16;	/* transfer buffer size associated with current description*/
-+			unsigned int desc_count : 6;	/* number of descriptors used for the current frame */
-+			unsigned int vlan_enable: 1;    /* VLAN TIC insertion enable */
-+			unsigned int ip_csum_en : 1;    /* TSS IPv4 IP Header checksum enable */
-+			unsigned int ipv6_tx_en : 1;    /* TSS IPv6 TX enable */
-+			unsigned int tcp_csum_en: 1;    /* TSS TCP checksum enable */
-+			unsigned int udp_csum_en: 1;    /* TSS UDP checksum enable */
-+			unsigned int            : 2;
-+			unsigned int perr		: 1;	/* protocol error during processing this descriptor */
-+			unsigned int derr		: 1;	/* data error during processing this descriptor */
-+			unsigned int own 		: 1;	/* owner bit. 0-CPU, 1-DMA */
-+#endif
-+        } bits_tx_out;
-+
-+	} frame_ctrl;
-+
-+	union flag_status_t
-+	{
-+		unsigned int bits32;
-+		struct bits_0004
-+		{
-+#if (BIG_ENDIAN==1)
-+            unsigned int priority   : 3;    /* user priority extracted from receiving frame*/
-+            unsigned int cfi        : 1;	/* cfi extracted from receiving frame*/
-+			unsigned int vlan_id    :12;	/* VLAN ID extracted from receiving frame */
-+			unsigned int frame_count:16;	/* received frame byte count,include CRC,not include VLAN TIC */
-+#else
-+			unsigned int frame_count:16;	/* received frame byte count,include CRC,not include VLAN TIC */
-+			unsigned int vlan_id    :12;	/* VLAN ID extracted from receiving frame */
-+            unsigned int cfi        : 1;	/* cfi extracted from receiving frame*/
-+            unsigned int priority   : 3;    /* user priority extracted from receiving frame*/
-+#endif
-+		} bits_rx_status;
-+
-+		struct bits_0005
-+		{
-+#if (BIG_ENDIAN==1)
-+            unsigned int priority   : 3;    /* user priority to transmit*/
-+            unsigned int cfi        : 1;	/* cfi to transmit*/
-+			unsigned int vlan_id    :12;	/* VLAN ID to transmit */
-+			unsigned int frame_count:16;    /* total tx frame byte count */
-+#else
-+			unsigned int frame_count:16;    /* total tx frame byte count */
-+			unsigned int vlan_id    :12;	/* VLAN ID to transmit */
-+            unsigned int cfi        : 1;	/* cfi to transmit*/
-+            unsigned int priority   : 3;    /* user priority to transmit*/
-+#endif
-+		} bits_tx_flag;
-+	} flag_status;
-+
-+	unsigned int buf_adr;	/* data buffer address */
-+
-+	union next_desc_t
-+	{
-+		unsigned int next_descriptor;
-+		struct bits_000c
-+		{
-+#if (BIG_ENDIAN==1)
-+			unsigned int ndar		:28;	/* next descriptor address */
-+			unsigned int eofie		: 1;	/* end of frame interrupt enable */
-+			unsigned int    		: 1;
-+			unsigned int sof_eof	: 2;	/* 00-the linking descriptor   01-the last descriptor of a frame*/
-+			                                /* 10-the first descriptor of a frame    11-only one descriptor for a frame*/
-+#else
-+			unsigned int sof_eof	: 2;	/* 00-the linking descriptor   01-the last descriptor of a frame*/
-+			                                /* 10-the first descriptor of a frame    11-only one descriptor for a frame*/
-+			unsigned int    		: 1;
-+			unsigned int eofie		: 1;	/* end of frame interrupt enable */
-+			unsigned int ndar		:28;	/* next descriptor address */
-+#endif
-+		} bits;
-+	} next_desc;
-+} GMAC_DESCRIPTOR_T;
-+
-+typedef struct gmac_conf {
-+	struct net_device *dev;
-+	int portmap;
-+	int vid;
-+	int flag;     /* 1: active  0: non-active */
-+} sys_gmac_conf;
-+
-+struct gmac_private {
-+	unsigned char       *tx_bufs;	/* Tx bounce buffer region. */
-+	unsigned char       *rx_bufs;
-+	GMAC_DESCRIPTOR_T	*tx_desc;	/* point to virtual TX descriptor address*/
-+	GMAC_DESCRIPTOR_T	*rx_desc;	/* point to virtual RX descriptor address*/
-+	GMAC_DESCRIPTOR_T	*tx_cur_desc;	/* point to current TX descriptor */
-+	GMAC_DESCRIPTOR_T	*rx_cur_desc;	/* point to current RX descriptor */
-+	GMAC_DESCRIPTOR_T   *tx_finished_desc;
-+	GMAC_DESCRIPTOR_T   *rx_finished_desc;
-+	unsigned long       cur_tx;
-+	unsigned int        cur_rx;	/* Index into the Rx buffer of next Rx pkt. */
-+	unsigned int        tx_flag;
-+	unsigned long       dirty_tx;
-+	unsigned char       *tx_buf[TX_DESC_NUM];	/* Tx bounce buffers */
-+	dma_addr_t          tx_desc_dma; /* physical TX descriptor address */
-+	dma_addr_t          rx_desc_dma;	/* physical RX descriptor address */
-+	dma_addr_t          tx_bufs_dma; /* physical TX descriptor address */
-+	dma_addr_t          rx_bufs_dma; /* physical RX descriptor address */
-+    struct net_device_stats  stats;
-+	pid_t               thr_pid;
-+	wait_queue_head_t   thr_wait;
-+	struct completion   thr_exited;
-+    spinlock_t          lock;
-+    int                 time_to_die;
-+	unsigned int		tx_desc_hdr[GMAC_PHY_IF];	/* the descriptor which sw can fill */
-+	unsigned int		tx_desc_tail[GMAC_PHY_IF];	/* the descriptor which is not cleaned yet */
-+};
-+
-+
-+struct reg_ioctl_data {
-+    unsigned int    reg_addr;   /* the register address */
-+    unsigned int    val_in;     /* data write to the register */
-+    unsigned int    val_out;    /* data read from the register */
-+};
-+
-+#ifdef CONFIG_SL2312_MPAGE
-+typedef struct tx_data_t {
-+	int	freeable; // 1 when it's skb. it can be freed in tx interrupt handler
-+	struct sk_buff*	skb; // skb
-+	int	desc_in_use; // 1 when the desc is in use. 0 when desc is available.
-+	long end_seq; // to find out packets are in seq.
-+	// so this value is the seq of next packet.
-+} tx_data;
-+#endif
-+
-+/*************************************************************
-+ *         Global Variable
-+ *************************************************************/
-+struct semaphore        sem_gmac;   /* semaphore for share pins issue */
-+
-+/*************************************************************
-+ *        Static Global Variable
-+ *************************************************************/
-+// static unsigned int     MAC_BASE_ADDR = GMAC0_BASE;
-+static unsigned int     gmac_base_addr[GMAC_PHY_IF] = {GMAC0_BASE,GMAC1_BASE};
-+static unsigned int     gmac_irq[GMAC_PHY_IF] = {IRQ_GMAC0,IRQ_GMAC1};
-+static struct net_device *gmac_dev[GMAC_PHY_IF];
-+
-+static unsigned int     FLAG_SWITCH=0;	/* if 1-->switch chip presented. if 0-->switch chip unpresented */
-+static unsigned int     flow_control_enable[GMAC_PHY_IF] = {1,1};
-+static unsigned int     pre_phy_status[GMAC_PHY_IF] = {LINK_DOWN,LINK_DOWN};
-+static unsigned int     tx_desc_virtual_base[GMAC_PHY_IF];
-+static unsigned int     rx_desc_virtual_base[GMAC_PHY_IF];
-+static unsigned int     full_duplex = 1;
-+static unsigned int     speed = 1;
-+#ifdef CONFIG_SL2312_MPAGE
-+static tx_data		    tx_skb[GMAC_PHY_IF][TX_DESC_NUM];
-+#else
-+static struct sk_buff   *tx_skb[GMAC_PHY_IF][TX_DESC_NUM];
-+#endif
-+static struct sk_buff   *rx_skb[GMAC_PHY_IF][RX_DESC_NUM];
-+static unsigned int     tx_desc_start_adr[GMAC_PHY_IF];
-+static unsigned int     rx_desc_start_adr[GMAC_PHY_IF];
-+static unsigned char    eth0_mac[6]= {0x00,0x50,0xc2,0x2b,0xd3,0x25};
-+static unsigned char    eth1_mac[6]= {0x00,0x50,0xc2,0x2b,0xdf,0xfe};
-+static unsigned int     next_tick = 3 * HZ;
-+
-+static unsigned int     phy_addr[GMAC_PHY_IF] = {0x01,0x02};  /* define PHY address */
-+
-+DECLARE_WAIT_QUEUE_HEAD(gmac_queue);
-+//static 	wait_queue_t    wait;
-+
-+struct gmac_conf VLAN_conf[] = {
-+#ifdef CONFIG_ADM_6999
-+	{ (struct net_device *)0,0x7F,1 },
-+	{ (struct net_device *)0,0x80,2 }
-+#endif
-+#ifdef CONFIG_ADM_6996
-+	{ (struct net_device *)0,0x0F,1 },
-+	{ (struct net_device *)0,0x10,2 }
-+#endif
-+};
-+
-+#define NUM_VLAN_IF	(sizeof(VLAN_conf)/sizeof(struct gmac_conf))
-+
-+
-+/************************************************/
-+/*            GMAC function declare             */
-+/************************************************/
-+
-+unsigned int mii_read(unsigned char phyad,unsigned char regad);
-+void mii_write(unsigned char phyad,unsigned char regad,unsigned int value);
-+static void gmac_set_phy_status(struct net_device *dev);
-+static void gmac_get_phy_status(struct net_device *dev);
-+static int gmac_phy_thread (void *data);
-+static int gmac_set_mac_address(struct net_device *dev, void *addr);
-+static void gmac_tx_timeout(struct net_device *dev);
-+static void gmac_tx_packet_complete(struct net_device *dev);
-+static int gmac_start_xmit(struct sk_buff *skb, struct net_device *dev);
-+static void gmac_set_rx_mode(struct net_device *dev);
-+static void gmac_rx_packet(struct net_device *dev);
-+static int gmac_open (struct net_device *dev);
-+static int gmac_netdev_ioctl(struct net_device *dev, struct ifreq *rq, int cmd);
-+
-+static unsigned int gmac_get_dev_index(struct net_device *dev);
-+static unsigned int gmac_select_interface(struct net_device *dev);
-+
-+#ifdef CONFIG_SL2312_MPAGE
-+int printk_all(int dev_index, struct gmac_private* tp);
-+#endif
-+
-+/****************************************/
-+/*	SPI Function Declare		*/
-+/****************************************/
-+void SPI_write(unsigned char addr,unsigned int value);
-+unsigned int SPI_read(unsigned char table,unsigned char addr);
-+void SPI_write_bit(char bit_EEDO);
-+unsigned int SPI_read_bit(void);
-+void SPI_default(void);
-+void SPI_reset(unsigned char rstype,unsigned char port_cnt);
-+void SPI_pre_st(void);
-+void SPI_CS_enable(unsigned char enable);
-+void SPI_Set_VLAN(unsigned char LAN,unsigned int port_mask);
-+void SPI_Set_tag(unsigned int port,unsigned tag);
-+void SPI_Set_PVID(unsigned int PVID,unsigned int port_mask);
-+unsigned int SPI_Get_PVID(unsigned int port);
-+void SPI_mac_lock(unsigned int port, unsigned char lock);
-+void SPI_get_port_state(unsigned int port);
-+void SPI_port_enable(unsigned int port,unsigned char enable);
-+unsigned int SPI_get_identifier(void);
-+void SPI_get_status(unsigned int port);
-+
-+/****************************************/
-+/*	VLAN Function Declare		        */
-+/****************************************/
-+int getVLANfromdev (struct net_device *dev );
-+struct net_device * getdevfromVLAN( int VID);
-+
-+
-+
-+/************************************************/
-+/*                 function body                */
-+/************************************************/
-+#if 0
-+void hw_memcpy(void *to,const void *from,unsigned long n)
-+{
-+    writel(from,SL2312_DRAM_CTRL_BASE+0x20);  /* set source address */
-+    writel(to,SL2312_DRAM_CTRL_BASE+0x24);    /* set destination address */
-+    writel(n,SL2312_DRAM_CTRL_BASE+0x28);     /* set byte count */
-+    writel(0x00000001,SL2312_DRAM_CTRL_BASE+0x2c);
-+    while (readl(SL2312_DRAM_CTRL_BASE+0x2c));
-+}
-+#endif
-+
-+static unsigned int gmac_read_reg(unsigned int addr)
-+{
-+    unsigned int    reg_val;
-+//    unsigned int    flags;
-+//    spinlock_t     lock;
-+
-+//    spin_lock_irqsave(&lock, flags);
-+    reg_val = readl(addr);	// Gary Chen
-+//	spin_unlock_irqrestore(&lock, flags);
-+	return (reg_val);
-+}
-+
-+static void gmac_write_reg(unsigned int addr,unsigned int data,unsigned int bit_mask)
-+{
-+	unsigned int    reg_val;
-+    //unsigned int    *addr;
-+//    unsigned int    flags;
-+//    spinlock_t     lock;
-+
-+//    spin_lock_irqsave(&lock, flags);
-+	reg_val = ( gmac_read_reg(addr) & (~bit_mask) ) | (data & bit_mask);
-+    writel(reg_val,addr);
-+//	spin_unlock_irqrestore(&lock, flags);
-+	return;
-+}
-+
-+
-+static void gmac_sw_reset(struct net_device *dev)
-+{
-+    unsigned int    index;
-+    unsigned int    reg_val;
-+
-+    index = gmac_get_dev_index(dev);
-+    if (index==0)
-+        reg_val = readl(GMAC_GLOBAL_BASE_ADDR+0x0c) | 0x00000020;   /* GMAC0 S/W reset */
-+    else
-+        reg_val = readl(GMAC_GLOBAL_BASE_ADDR+0x0c) | 0x00000040;   /* GMAC1 S/W reset */
-+
-+    writel(reg_val,GMAC_GLOBAL_BASE_ADDR+0x0c);
-+    return;
-+}
-+
-+static void gmac_get_mac_address(void)
-+{
-+#ifdef CONFIG_MTD
-+	extern int get_vlaninfo(vlaninfo* vlan);
-+    static vlaninfo    vlan[2];
-+
-+    if (get_vlaninfo(&vlan[0]))
-+    {
-+        memcpy(eth0_mac,vlan[0].mac,6);
-+        VLAN_conf[0].vid = vlan[0].vlanid;
-+        VLAN_conf[0].portmap = vlan[0].vlanmap;
-+        memcpy(eth1_mac,vlan[1].mac,6);
-+        VLAN_conf[1].vid = vlan[1].vlanid;
-+        VLAN_conf[1].portmap = vlan[1].vlanmap;
-+    }
-+#else
-+    unsigned int reg_val;
-+
-+    reg_val = readl(IO_ADDRESS(SL2312_SECURITY_BASE)+0xac);
-+    eth0_mac[4] = (reg_val & 0xff00) >> 8;
-+    eth0_mac[5] = reg_val & 0x00ff;
-+    reg_val = readl(IO_ADDRESS(SL2312_SECURITY_BASE)+0xac);
-+    eth1_mac[4] = (reg_val & 0xff00) >> 8;
-+    eth1_mac[5] = reg_val & 0x00ff;
-+#endif
-+    return;
-+}
-+
-+static unsigned int gmac_get_dev_index(struct net_device *dev)
-+{
-+    unsigned int    i;
-+
-+    /* get device index number */
-+    for (i=0;iMII 1->GMII 2->RGMII(10/100) 3->RGMII(1000) */
-+    else
-+        phy_mode = 2;   /* 0->MII 1->GMII 2->RGMII(10/100) 3->RGMII(1000) */
-+
-+    /* set PHY operation mode */
-+    status = (phy_mode<<5) | 0x11 | (full_duplex<<3) | (speed<<1);
-+    gmac_write_reg(gmac_base_addr[index] + GMAC_STATUS,status ,0x0000007f);
-+
-+	/* set station MAC address1 and address2 */
-+	if (index==0)
-+	    memcpy(&sock.sa_data[0],ð0_mac[0],6);
-+    else
-+	    memcpy(&sock.sa_data[0],ð1_mac[0],6);
-+    gmac_set_mac_address(dev,(void *)&sock);
-+
-+    /* set RX_FLTR register to receive all multicast packet */
-+    gmac_write_reg(gmac_base_addr[index] + GMAC_RX_FLTR,0x0000001F,0x0000001f);
-+    //gmac_write_reg(gmac_base_addr[index] + GMAC_RX_FLTR,0x00000007,0x0000001f);
-+
-+	/* set per packet buffer size */
-+	config1.bits32 = 0;
-+    config1.bits.buf_size = 11; /* buffer size = 2048-byte */
-+    gmac_write_reg(gmac_base_addr[index] + GMAC_CONFIG1,config1.bits32,0x0000000f);
-+
-+	/* set flow control threshold */
-+	config2_val.bits32 = 0;
-+	config2_val.bits.set_threshold = RX_DESC_NUM/4;
-+	config2_val.bits.rel_threshold = RX_DESC_NUM*3/4;
-+	gmac_write_reg(gmac_base_addr[index] + GMAC_CONFIG2,config2_val.bits32,0xffffffff);
-+
-+	/* init remaining buffer number register */
-+	rbnr_val.bits32 = 0;
-+	rbnr_val.bits.buf_remain = RX_DESC_NUM;
-+	rbnr_mask.bits32 = 0;
-+	rbnr_mask.bits.buf_remain = 0xffff;
-+	gmac_write_reg(gmac_base_addr[index] + GMAC_RBNR,rbnr_val.bits32,rbnr_mask.bits32);
-+
-+    /* disable TX/RX and disable internal loop back */
-+    config0.bits32 = 0;
-+    config0_mask.bits32 = 0;
-+    config0.bits.max_len = 2;
-+    if (flow_control_enable[index]==1)
-+    {
-+        config0.bits.tx_fc_en = 1; /* enable tx flow control */
-+        config0.bits.rx_fc_en = 1; /* enable rx flow control */
-+        printk("Enable MAC Flow Control...\n");
-+    }
-+    else
-+    {
-+        config0.bits.tx_fc_en = 0; /* disable tx flow control */
-+        config0.bits.rx_fc_en = 0; /* disable rx flow control */
-+        printk("Disable MAC Flow Control...\n");
-+    }
-+    config0.bits.dis_rx = 1;  /* disable rx */
-+    config0.bits.dis_tx = 1;  /* disable tx */
-+    config0.bits.loop_back = 0; /* enable/disable GMAC loopback */
-+	config0.bits.inv_rx_clk = 0;
-+	config0.bits.rising_latch = 1;
-+	config0.bits.ipv4_tss_rx_en = 1;  /* enable H/W to check ip checksum */
-+	config0.bits.ipv6_tss_rx_en = 1;  /* enable H/W to check ip checksum */
-+
-+    config0_mask.bits.max_len = 7;
-+    config0_mask.bits.tx_fc_en = 1;
-+    config0_mask.bits.rx_fc_en = 1;
-+    config0_mask.bits.dis_rx = 1;
-+    config0_mask.bits.dis_tx = 1;
-+    config0_mask.bits.loop_back = 1;
-+    config0_mask.bits.inv_rx_clk = 1;
-+	config0_mask.bits.rising_latch = 1;
-+	config0_mask.bits.ipv4_tss_rx_en = 1;
-+	config0_mask.bits.ipv6_tss_rx_en = 1;
-+    gmac_write_reg(gmac_base_addr[index] + GMAC_CONFIG0,config0.bits32,config0_mask.bits32);
-+
-+	return (0);
-+}
-+
-+static void gmac_enable_tx_rx(struct net_device *dev)
-+{
-+	GMAC_CONFIG0_T	config0,config0_mask;
-+	int				dev_index;
-+
-+    dev_index = gmac_select_interface(dev);
-+
-+    /* enable TX/RX */
-+    config0.bits32 = 0;
-+    config0_mask.bits32 = 0;
-+    config0.bits.dis_rx = 0;  /* enable rx */
-+    config0.bits.dis_tx = 0;  /* enable tx */
-+    config0_mask.bits.dis_rx = 1;
-+    config0_mask.bits.dis_tx = 1;
-+    gmac_write_reg(gmac_base_addr[dev_index] + GMAC_CONFIG0,config0.bits32,config0_mask.bits32);
-+}
-+
-+static void gmac_disable_tx_rx(struct net_device *dev)
-+{
-+	GMAC_CONFIG0_T	config0,config0_mask;
-+	int				dev_index;
-+
-+    dev_index = gmac_select_interface(dev);
-+
-+    /* enable TX/RX */
-+    config0.bits32 = 0;
-+    config0_mask.bits32 = 0;
-+    config0.bits.dis_rx = 1;  /* disable rx */
-+    config0.bits.dis_tx = 1;  /* disable tx */
-+    config0_mask.bits.dis_rx = 1;
-+    config0_mask.bits.dis_tx = 1;
-+    gmac_write_reg(gmac_base_addr[dev_index] + GMAC_CONFIG0,config0.bits32,config0_mask.bits32);
-+}
-+
-+#ifdef CONFIG_SL_NAPI
-+static int gmac_rx_poll_ga(struct net_device *dev, int *budget)
-+{
-+	struct gmac_private *tp = dev->priv;
-+	struct sk_buff 		*skb;
-+    GMAC_RXDMA_CTRL_T       rxdma_ctrl,rxdma_ctrl_mask;
-+	GMAC_RXDMA_FIRST_DESC_T	rxdma_busy;
-+    GMAC_DESCRIPTOR_T   *rx_desc;
-+	unsigned int 		pkt_size;
-+	unsigned int        desc_count;
-+    unsigned int        vid;
-+//    unsigned int        priority;
-+	unsigned int        own;
-+	unsigned int        good_frame = 0;
-+	unsigned int        index;
-+	unsigned int        dev_index;
-+	int                 work = 0;
-+	int                 work_done = 0;
-+	int                 quota = min(dev->quota, *budget);
-+
-+    dev_index = gmac_select_interface(dev);
-+
-+	for (;;)
-+	{
-+        own = tp->rx_cur_desc->frame_ctrl.bits32 >> 31;
-+        if (own == CPU) /* check owner bit */
-+        {
-+	        rx_desc = tp->rx_cur_desc;
-+#if (GMAC_DEBUG==1)
-+	        /* check error interrupt */
-+	        if ( (rx_desc->frame_ctrl.bits_rx.derr==1)||(rx_desc->frame_ctrl.bits_rx.perr==1) )
-+	        {
-+    	        printk("%s::Rx Descriptor Processing Error !!!\n",__func__);
-+    	    }
-+#endif
-+    	    /* get frame information from the first descriptor of the frame */
-+	        pkt_size = rx_desc->flag_status.bits_rx_status.frame_count - 4;  /*total byte count in a frame*/
-+#if (GMAC_DEBUG==1)
-+            priority = rx_desc->flag_status.bits_rx_status.priority;    /* 802.1p priority */
-+#endif
-+            vid = rx_desc->flag_status.bits_rx_status.vlan_id;          /* 802.1q vlan id */
-+            if (vid == 0)
-+            {
-+                vid = 1;    /* default vlan */
-+            }
-+	        desc_count = rx_desc->frame_ctrl.bits_rx.desc_count; /* get descriptor count per frame */
-+
-+    		if (rx_desc->frame_ctrl.bits_rx.frame_state == 0x000) /* good frame */
-+    		{
-+    			tp->stats.rx_bytes += pkt_size;
-+    			tp->stats.rx_packets++;
-+    			good_frame = 1;
-+    		}
-+    		else
-+    		{
-+    			tp->stats.rx_errors++;
-+    			good_frame = 0;
-+    			printk("RX status: 0x%x\n",rx_desc->frame_ctrl.bits_rx.frame_state);
-+    		}
-+    	}
-+    	else
-+    	{
-+    	    work_done = 1;
-+    	    break;  /* Rx process is completed */
-+    	}
-+
-+        if (good_frame == 1)
-+        {
-+            /* get rx skb buffer index */
-+            index = ((unsigned int)tp->rx_cur_desc - rx_desc_start_adr[dev_index]) / sizeof(GMAC_DESCRIPTOR_T);
-+            if (rx_skb[dev_index][index])
-+            {
-+                skb_reserve (rx_skb[dev_index][index], 2);	/* 16 byte align the IP fields. */
-+                rx_skb[dev_index][index]->dev = dev;
-+                rx_skb[dev_index][index]->ip_summed = CHECKSUM_UNNECESSARY;
-+ 			    skb_put(rx_skb[dev_index][index],pkt_size);
-+ 			    rx_skb[dev_index][index]->protocol = eth_type_trans(rx_skb[dev_index][index],dev); /* set skb protocol */
-+ 			    netif_rx(rx_skb[dev_index][index]);  /* socket rx */
-+ 			    dev->last_rx = jiffies;
-+
-+ 			    /* allocate rx skb buffer */
-+                if ( (skb = dev_alloc_skb(RX_BUF_SIZE))==NULL)  /* allocate socket buffer */
-+                {
-+                    printk("%s::skb buffer allocation fail !\n",__func__);
-+                }
-+                rx_skb[dev_index][index] = skb;
-+                tp->rx_cur_desc->buf_adr = (unsigned int)__pa(skb->data) | 0x02;    /* insert two bytes in the beginning of rx data */
-+            }
-+            else
-+            {
-+                printk("%s::rx skb index error !\n",__func__);
-+            }
-+        }
-+
-+	    tp->rx_cur_desc->frame_ctrl.bits_rx.own = DMA; /* release rx descriptor to DMA */
-+        /* point to next rx descriptor */
-+        tp->rx_cur_desc = (GMAC_DESCRIPTOR_T *)((tp->rx_cur_desc->next_desc.next_descriptor & 0xfffffff0)+rx_desc_virtual_base[dev_index]);
-+
-+        /* release buffer to Remaining Buffer Number Register */
-+        if (flow_control_enable[dev_index] ==1)
-+        {
-+//            gmac_write_reg(gmac_base_addr[dev_index] + GMAC_BNCR,desc_count,0x0000ffff);
-+            writel(desc_count,(unsigned int *)(gmac_base_addr[dev_index] + GMAC_BNCR));
-+        }
-+
-+		if (work++ >= quota )
-+		{
-+			break;
-+		}
-+    }
-+
-+    /* if RX DMA process is stoped , restart it */
-+	rxdma_busy.bits.rd_first_des_ptr = gmac_read_reg(gmac_base_addr[dev_index] + GMAC_RXDMA_FIRST_DESC);
-+	if (rxdma_busy.bits.rd_busy == 0)
-+	{
-+	    rxdma_ctrl.bits32 = 0;
-+    	rxdma_ctrl.bits.rd_start = 1;    /* start RX DMA transfer */
-+	    rxdma_ctrl.bits.rd_continue = 1; /* continue RX DMA operation */
-+	    rxdma_ctrl_mask.bits32 = 0;
-+    	rxdma_ctrl_mask.bits.rd_start = 1;
-+	    rxdma_ctrl_mask.bits.rd_continue = 1;
-+	    gmac_write_reg(gmac_base_addr[dev_index] + GMAC_RXDMA_CTRL,rxdma_ctrl.bits32,rxdma_ctrl_mask.bits32);
-+    }
-+
-+	dev->quota -= work;
-+	*budget -= work;
-+	if (work_done==1)
-+	{
-+	    /* Receive descriptor is empty now */
-+        netif_rx_complete(dev);
-+        /* enable receive interrupt */
-+        gmac_write_reg(gmac_base_addr[dev_index] + GMAC_RXDMA_CTRL,0x0007c000,0x0007c000);   /* enable rx interrupt */
-+        return 0;
-+    }
-+    else
-+    {
-+        return -1;
-+    }
-+}
-+
-+static int gmac_rx_poll_gb(struct net_device *dev, int *budget)
-+{
-+	struct gmac_private *tp = dev->priv;
-+	struct sk_buff 		*skb;
-+    GMAC_RXDMA_CTRL_T       rxdma_ctrl,rxdma_ctrl_mask;
-+	GMAC_RXDMA_FIRST_DESC_T	rxdma_busy;
-+    GMAC_DESCRIPTOR_T   *rx_desc;
-+	unsigned int 		pkt_size;
-+	unsigned int        desc_count;
-+    unsigned int        vid;
-+//    unsigned int        priority;
-+	unsigned int        own;
-+	unsigned int        good_frame = 0;
-+	unsigned int        index;
-+	unsigned int        dev_index;
-+	int                 work = 0;
-+	int                 work_done = 0;
-+	int                 quota = min(dev->quota, *budget);
-+
-+    dev_index = gmac_select_interface(dev);
-+
-+	for (;;)
-+	{
-+        own = tp->rx_cur_desc->frame_ctrl.bits32 >> 31;
-+        if (own == CPU) /* check owner bit */
-+        {
-+	        rx_desc = tp->rx_cur_desc;
-+#if (GMAC_DEBUG==1)
-+	        /* check error interrupt */
-+	        if ( (rx_desc->frame_ctrl.bits_rx.derr==1)||(rx_desc->frame_ctrl.bits_rx.perr==1) )
-+	        {
-+    	        printk("%s::Rx Descriptor Processing Error !!!\n",__func__);
-+    	    }
-+#endif
-+    	    /* get frame information from the first descriptor of the frame */
-+	        pkt_size = rx_desc->flag_status.bits_rx_status.frame_count - 4;  /*total byte count in a frame*/
-+#if (GMAC_DEBUG==1)
-+            priority = rx_desc->flag_status.bits_rx_status.priority;    /* 802.1p priority */
-+#endif
-+            vid = rx_desc->flag_status.bits_rx_status.vlan_id;          /* 802.1q vlan id */
-+            if (vid == 0)
-+            {
-+                vid = 1;    /* default vlan */
-+            }
-+	        desc_count = rx_desc->frame_ctrl.bits_rx.desc_count; /* get descriptor count per frame */
-+
-+    		if (rx_desc->frame_ctrl.bits_rx.frame_state == 0x000) /* good frame */
-+    		{
-+    			tp->stats.rx_bytes += pkt_size;
-+    			tp->stats.rx_packets++;
-+    			good_frame = 1;
-+    		}
-+    		else
-+    		{
-+    			tp->stats.rx_errors++;
-+    			good_frame = 0;
-+    			printk("RX status: 0x%x\n",rx_desc->frame_ctrl.bits_rx.frame_state);
-+    		}
-+    	}
-+    	else
-+    	{
-+    	    work_done = 1;
-+    	    break;  /* Rx process is completed */
-+    	}
-+
-+        if (good_frame == 1)
-+        {
-+            /* get rx skb buffer index */
-+            index = ((unsigned int)tp->rx_cur_desc - rx_desc_start_adr[dev_index]) / sizeof(GMAC_DESCRIPTOR_T);
-+            if (rx_skb[dev_index][index])
-+            {
-+                skb_reserve (rx_skb[dev_index][index], 2);	/* 16 byte align the IP fields. */
-+                rx_skb[dev_index][index]->dev = dev;
-+                rx_skb[dev_index][index]->ip_summed = CHECKSUM_UNNECESSARY;
-+ 			    skb_put(rx_skb[dev_index][index],pkt_size);
-+ 			    rx_skb[dev_index][index]->protocol = eth_type_trans(rx_skb[dev_index][index],dev); /* set skb protocol */
-+ 			    netif_rx(rx_skb[dev_index][index]);  /* socket rx */
-+ 			    dev->last_rx = jiffies;
-+
-+ 			    /* allocate rx skb buffer */
-+                if ( (skb = dev_alloc_skb(RX_BUF_SIZE))==NULL)  /* allocate socket buffer */
-+                {
-+                    printk("%s::skb buffer allocation fail !\n",__func__);
-+                }
-+                rx_skb[dev_index][index] = skb;
-+                tp->rx_cur_desc->buf_adr = (unsigned int)__pa(skb->data) | 0x02;    /* insert two bytes in the beginning of rx data */
-+            }
-+            else
-+            {
-+                printk("%s::rx skb index error !\n",__func__);
-+            }
-+        }
-+
-+	    tp->rx_cur_desc->frame_ctrl.bits_rx.own = DMA; /* release rx descriptor to DMA */
-+        /* point to next rx descriptor */
-+        tp->rx_cur_desc = (GMAC_DESCRIPTOR_T *)((tp->rx_cur_desc->next_desc.next_descriptor & 0xfffffff0)+rx_desc_virtual_base[dev_index]);
-+
-+        /* release buffer to Remaining Buffer Number Register */
-+        if (flow_control_enable[dev_index] ==1)
-+        {
-+//            gmac_write_reg(gmac_base_addr[dev_index] + GMAC_BNCR,desc_count,0x0000ffff);
-+            writel(desc_count,(unsigned int *)(gmac_base_addr[dev_index] + GMAC_BNCR));
-+        }
-+
-+		if (work++ >= quota )
-+		{
-+			break;
-+		}
-+    }
-+
-+    /* if RX DMA process is stoped , restart it */
-+	rxdma_busy.bits.rd_first_des_ptr = gmac_read_reg(gmac_base_addr[dev_index] + GMAC_RXDMA_FIRST_DESC);
-+	if (rxdma_busy.bits.rd_busy == 0)
-+	{
-+	    rxdma_ctrl.bits32 = 0;
-+    	rxdma_ctrl.bits.rd_start = 1;    /* start RX DMA transfer */
-+	    rxdma_ctrl.bits.rd_continue = 1; /* continue RX DMA operation */
-+	    rxdma_ctrl_mask.bits32 = 0;
-+    	rxdma_ctrl_mask.bits.rd_start = 1;
-+	    rxdma_ctrl_mask.bits.rd_continue = 1;
-+	    gmac_write_reg(gmac_base_addr[dev_index] + GMAC_RXDMA_CTRL,rxdma_ctrl.bits32,rxdma_ctrl_mask.bits32);
-+    }
-+
-+	dev->quota -= work;
-+	*budget -= work;
-+	if (work_done==1)
-+	{
-+	    /* Receive descriptor is empty now */
-+        netif_rx_complete(dev);
-+        /* enable receive interrupt */
-+        gmac_write_reg(gmac_base_addr[dev_index] + GMAC_RXDMA_CTRL,0x0007c000,0x0007c000);   /* enable rx interrupt */
-+        return 0;
-+    }
-+    else
-+    {
-+        return -1;
-+    }
-+}
-+
-+#endif
-+
-+static void gmac_rx_packet(struct net_device *dev)
-+{
-+	struct gmac_private *tp = dev->priv;
-+	struct sk_buff 		*skb;
-+    GMAC_RXDMA_CTRL_T       rxdma_ctrl,rxdma_ctrl_mask;
-+	GMAC_RXDMA_FIRST_DESC_T	rxdma_busy;
-+    GMAC_DESCRIPTOR_T   *rx_desc;
-+	unsigned int 		pkt_size;
-+	unsigned int        desc_count;
-+    unsigned int        vid;
-+//    unsigned int        priority;
-+	unsigned int        own;
-+	unsigned int        good_frame = 0;
-+	unsigned int        i,index;
-+	unsigned int        dev_index;
-+
-+    dev_index = gmac_select_interface(dev);
-+
-+	for (i=0;i<256;i++)
-+	{
-+        own = tp->rx_cur_desc->frame_ctrl.bits32 >> 31;
-+        if (own == CPU) /* check owner bit */
-+        {
-+	        rx_desc = tp->rx_cur_desc;
-+#if (GMAC_DEBUG==1)
-+	        /* check error interrupt */
-+	        if ( (rx_desc->frame_ctrl.bits_rx.derr==1)||(rx_desc->frame_ctrl.bits_rx.perr==1) )
-+	        {
-+    	        printk("%s::Rx Descriptor Processing Error !!!\n",__func__);
-+    	    }
-+#endif
-+    	    /* get frame information from the first descriptor of the frame */
-+	        pkt_size = rx_desc->flag_status.bits_rx_status.frame_count - 4;  /*total byte count in a frame*/
-+#if (GMAC_DEBUG==1)
-+            priority = rx_desc->flag_status.bits_rx_status.priority;    /* 802.1p priority */
-+#endif
-+            vid = rx_desc->flag_status.bits_rx_status.vlan_id;          /* 802.1q vlan id */
-+            if (vid == 0)
-+            {
-+                vid = 1;    /* default vlan */
-+            }
-+	        desc_count = rx_desc->frame_ctrl.bits_rx.desc_count; /* get descriptor count per frame */
-+
-+    		if (rx_desc->frame_ctrl.bits_rx.frame_state == 0x000) /* good frame */
-+    		{
-+    			tp->stats.rx_bytes += pkt_size;
-+    			tp->stats.rx_packets++;
-+    			good_frame = 1;
-+    		}
-+    		else
-+    		{
-+    			tp->stats.rx_errors++;
-+    			good_frame = 0;
-+    			printk("RX status: 0x%x\n",rx_desc->frame_ctrl.bits_rx.frame_state);
-+    		}
-+    	}
-+    	else
-+    	{
-+    	    break;  /* Rx process is completed */
-+    	}
-+
-+        if (good_frame == 1)
-+        {
-+            /* get rx skb buffer index */
-+            index = ((unsigned int)tp->rx_cur_desc - rx_desc_start_adr[dev_index]) / sizeof(GMAC_DESCRIPTOR_T);
-+            if (rx_skb[dev_index][index])
-+            {
-+                skb_reserve (rx_skb[dev_index][index], 2);	/* 16 byte align the IP fields. */
-+                rx_skb[dev_index][index]->dev = dev;
-+                rx_skb[dev_index][index]->ip_summed = CHECKSUM_UNNECESSARY;
-+ 			    skb_put(rx_skb[dev_index][index],pkt_size);
-+ 			    rx_skb[dev_index][index]->protocol = eth_type_trans(rx_skb[dev_index][index],dev); /* set skb protocol */
-+ 			    netif_rx(rx_skb[dev_index][index]);  /* socket rx */
-+ 			    dev->last_rx = jiffies;
-+
-+ 			    /* allocate rx skb buffer */
-+                if ( (skb = dev_alloc_skb(RX_BUF_SIZE))==NULL)  /* allocate socket buffer */
-+                {
-+                    printk("%s::skb buffer allocation fail !\n",__func__);
-+                }
-+                rx_skb[dev_index][index] = skb;
-+                tp->rx_cur_desc->buf_adr = (unsigned int)__pa(skb->data) | 0x02;    /* insert two bytes in the beginning of rx data */
-+            }
-+            else
-+            {
-+                printk("%s::rx skb index error !\n",__func__);
-+            }
-+        }
-+
-+	    tp->rx_cur_desc->frame_ctrl.bits_rx.own = DMA; /* release rx descriptor to DMA */
-+        /* point to next rx descriptor */
-+        tp->rx_cur_desc = (GMAC_DESCRIPTOR_T *)((tp->rx_cur_desc->next_desc.next_descriptor & 0xfffffff0)+rx_desc_virtual_base[dev_index]);
-+
-+        /* release buffer to Remaining Buffer Number Register */
-+        if (flow_control_enable[dev_index] ==1)
-+        {
-+            gmac_write_reg(gmac_base_addr[dev_index] + GMAC_BNCR,desc_count,0x0000ffff);
-+        }
-+    }
-+
-+    /* if RX DMA process is stoped , restart it */
-+	rxdma_busy.bits.rd_first_des_ptr = gmac_read_reg(gmac_base_addr[dev_index] + GMAC_RXDMA_FIRST_DESC);
-+	if (rxdma_busy.bits.rd_busy == 0)
-+	{
-+	    rxdma_ctrl.bits32 = 0;
-+    	rxdma_ctrl.bits.rd_start = 1;    /* start RX DMA transfer */
-+	    rxdma_ctrl.bits.rd_continue = 1; /* continue RX DMA operation */
-+	    rxdma_ctrl_mask.bits32 = 0;
-+    	rxdma_ctrl_mask.bits.rd_start = 1;
-+	    rxdma_ctrl_mask.bits.rd_continue = 1;
-+	    gmac_write_reg(gmac_base_addr[dev_index] + GMAC_RXDMA_CTRL,rxdma_ctrl.bits32,rxdma_ctrl_mask.bits32);
-+    }
-+}
-+
-+#ifdef CONFIG_SL2312_MPAGE
-+static inline void free_tx_buf(int dev_index, int desc_index)
-+{
-+	if (tx_skb[dev_index][desc_index].freeable &&
-+	    tx_skb[dev_index][desc_index].skb) {
-+		struct sk_buff* skb = tx_skb[dev_index][desc_index].skb;
-+		//printk("free_skb %x, len %d\n", skb, skb->len);
-+#ifdef CONFIG_TXINT_DISABLE
-+		dev_kfree_skb(skb);
-+#else
-+		dev_kfree_skb_irq(skb);
-+#endif
-+		tx_skb[dev_index][desc_index].skb = 0;
-+	}
-+}
-+
-+#ifdef CONFIG_TXINT_DISABLE
-+static void gmac_tx_packet_complete(struct net_device *dev)
-+{
-+	struct gmac_private     *tp = dev->priv;
-+    GMAC_DESCRIPTOR_T	    *tx_hw_complete_desc, *next_desc;
-+    unsigned int desc_cnt=0;
-+    unsigned int i,index,dev_index;
-+    unsigned int tx_current_descriptor = 0;
-+	// int own_dma = 0;
-+
-+    dev_index = gmac_select_interface(dev);
-+
-+	index = ((unsigned int)tp->tx_finished_desc - tx_desc_start_adr[dev_index]) / sizeof(GMAC_DESCRIPTOR_T);
-+	if (tx_skb[dev_index][index].desc_in_use && tp->tx_finished_desc->frame_ctrl.bits_tx_in.own == CPU) {
-+		free_tx_buf(dev_index, index);
-+		tx_skb[dev_index][index].desc_in_use = 0;
-+	}
-+	next_desc = (GMAC_DESCRIPTOR_T*)((tp->tx_finished_desc->next_desc.next_descriptor & 0xfffffff0) + tx_desc_virtual_base[dev_index]);
-+
-+	for (;;) {
-+		tx_hw_complete_desc = (GMAC_DESCRIPTOR_T *)((gmac_read_reg(gmac_base_addr[dev_index] + GMAC_TXDMA_CURR_DESC) & 0xfffffff0)+ tx_desc_virtual_base[dev_index]);
-+		if (next_desc == tx_hw_complete_desc)
-+			break;
-+		if (next_desc->frame_ctrl.bits_tx_in.own == CPU) {
-+			if (next_desc->frame_ctrl.bits_tx_in.success_tx == 1) {
-+				tp->stats.tx_bytes += next_desc->flag_status.bits_tx_flag.frame_count;
-+				tp->stats.tx_packets ++;
-+			} else {
-+				tp->stats.tx_errors++;
-+			}
-+			desc_cnt = next_desc->frame_ctrl.bits_tx_in.desc_count;
-+			for (i=1; iframe_ctrl.bits_tx_in.own = CPU;
-+				free_tx_buf(dev_index, index);
-+				tx_skb[dev_index][index].desc_in_use = 0;
-+				tp->tx_desc_tail[dev_index] = (tp->tx_desc_tail[dev_index] +1) & (TX_DESC_NUM-1);
-+				/* release Tx descriptor to CPU */
-+				next_desc = (GMAC_DESCRIPTOR_T *)((next_desc->next_desc.next_descriptor & 0xfffffff0)+tx_desc_virtual_base[dev_index]);
-+			}
-+			/* get tx skb buffer index */
-+			index = ((unsigned int)next_desc - tx_desc_start_adr[dev_index]) / sizeof(GMAC_DESCRIPTOR_T);
-+			/* free skb buffer */
-+			next_desc->frame_ctrl.bits_tx_in.own = CPU;
-+			free_tx_buf(dev_index, index);
-+			tx_skb[dev_index][index].desc_in_use = 0;
-+			tp->tx_desc_tail[dev_index] = (tp->tx_desc_tail[dev_index] +1) & (TX_DESC_NUM-1);
-+			tp->tx_finished_desc = next_desc;
-+//			printk("finish tx_desc index %d\n", index);
-+			next_desc = (GMAC_DESCRIPTOR_T *)((next_desc->next_desc.next_descriptor & 0xfffffff0)+tx_desc_virtual_base[dev_index]);
-+		}
-+		else
-+			break;
-+	}
-+	if (netif_queue_stopped(dev))
-+	{
-+		netif_wake_queue(dev);
-+	}
-+
-+}
-+#else
-+static void gmac_tx_packet_complete(struct net_device *dev)
-+{
-+	struct gmac_private     *tp = dev->priv;
-+	GMAC_DESCRIPTOR_T	    *tx_hw_complete_desc;
-+	unsigned int desc_cnt=0;
-+	unsigned int i,index,dev_index;
-+	unsigned int tx_current_descriptor = 0;
-+	// int own_dma = 0;
-+
-+	dev_index = gmac_select_interface(dev);
-+
-+	index = ((unsigned int)tp->tx_finished_desc - tx_desc_start_adr[dev_index]) / sizeof(GMAC_DESCRIPTOR_T);
-+
-+	/* check tx status and accumulate tx statistics */
-+	for (;;)
-+	{
-+
-+        for (i=0;i<1000;i++)
-+        {
-+            tx_current_descriptor = gmac_read_reg(gmac_base_addr[dev_index] + GMAC_TXDMA_CURR_DESC);
-+            if ( ((tx_current_descriptor & 0x00000003)==0x00000003) ||  /* only one descriptor */
-+                 ((tx_current_descriptor & 0x00000003)==0x00000001) )   /* the last descriptor */
-+            {
-+                break;
-+            }
-+            udelay(1);
-+        }
-+        if (i==1000)
-+        {
-+//            gmac_dump_register(dev);
-+//            printk("%s: tx current descriptor = %x \n",__func__,tx_current_descriptor);
-+//            printk_all(dev_index, tp);
-+            continue;
-+        }
-+
-+	    /* get tx H/W completed descriptor virtual address */
-+    	tx_hw_complete_desc = (GMAC_DESCRIPTOR_T *)((tx_current_descriptor & 0xfffffff0)+ tx_desc_virtual_base[dev_index]);
-+//    	tx_hw_complete_desc = (GMAC_DESCRIPTOR_T *)((gmac_read_reg(gmac_base_addr[dev_index] + GMAC_TXDMA_CURR_DESC) & 0xfffffff0)+ tx_desc_virtual_base[dev_index]);
-+	    if (tp->tx_finished_desc == tx_hw_complete_desc ) // ||
-+		    //tx_skb[dev_index][index].desc_in_use )   /* complete tx processing */
-+		{
-+			break;
-+		}
-+
-+        for (;;)
-+        {
-+    		if (tp->tx_finished_desc->frame_ctrl.bits_tx_in.own == CPU)
-+    		{
-+    #if (GMAC_DEBUG==1)
-+    			if ( (tp->tx_finished_desc->frame_ctrl.bits_tx_in.derr) ||
-+    			   (tp->tx_finished_desc->frame_ctrl.bits_tx_in.perr) )
-+    			{
-+    				printk("%s::Descriptor Processing Error !!!\n",__func__);
-+    			}
-+    #endif
-+    			if (tp->tx_finished_desc->frame_ctrl.bits_tx_in.success_tx == 1)
-+    			{
-+    				tp->stats.tx_bytes += tp->tx_finished_desc->flag_status.bits_tx_flag.frame_count;
-+    				tp->stats.tx_packets ++;
-+    			}
-+    			else
-+    			{
-+    				tp->stats.tx_errors++;
-+    			}
-+    			desc_cnt = tp->tx_finished_desc->frame_ctrl.bits_tx_in.desc_count;
-+    			for (i=1; itx_finished_desc - tx_desc_start_adr[dev_index]) / sizeof(GMAC_DESCRIPTOR_T);
-+    				tp->tx_finished_desc->frame_ctrl.bits_tx_in.own = CPU;
-+    				free_tx_buf(dev_index, index);
-+    				tx_skb[dev_index][index].desc_in_use = 0;
-+    				/* release Tx descriptor to CPU */
-+    				tp->tx_finished_desc = (GMAC_DESCRIPTOR_T *)((tp->tx_finished_desc->next_desc.next_descriptor & 0xfffffff0)+tx_desc_virtual_base[dev_index]);
-+    			}
-+    			/* get tx skb buffer index */
-+    			index = ((unsigned int)tp->tx_finished_desc - tx_desc_start_adr[dev_index]) / sizeof(GMAC_DESCRIPTOR_T);
-+    			/* free skb buffer */
-+    			tp->tx_finished_desc->frame_ctrl.bits_tx_in.own = CPU;
-+    			free_tx_buf(dev_index, index);
-+    			tx_skb[dev_index][index].desc_in_use = 0;
-+    			tp->tx_finished_desc = (GMAC_DESCRIPTOR_T *)((tp->tx_finished_desc->next_desc.next_descriptor & 0xfffffff0)+tx_desc_virtual_base[dev_index]);
-+
-+        	    if (tp->tx_finished_desc == tx_hw_complete_desc )
-+        		{
-+        			break;
-+        		}
-+            }
-+    		else
-+    		{
-+    			break;
-+       		}
-+		}
-+	}
-+
-+	if (netif_queue_stopped(dev))
-+	{
-+		netif_wake_queue(dev);
-+	}
-+
-+}
-+#endif
-+#else
-+
-+static void gmac_tx_packet_complete(struct net_device *dev)
-+{
-+	struct gmac_private     *tp = dev->priv;
-+    GMAC_DESCRIPTOR_T	    *tx_hw_complete_desc;
-+    unsigned int desc_cnt=0;
-+    unsigned int i,index,dev_index;
-+
-+    dev_index = gmac_select_interface(dev);
-+
-+	/* get tx H/W completed descriptor virtual address */
-+	tx_hw_complete_desc = (GMAC_DESCRIPTOR_T *)((gmac_read_reg(gmac_base_addr[dev_index] + GMAC_TXDMA_CURR_DESC) & 0xfffffff0)+ tx_desc_virtual_base[dev_index]);
-+	/* check tx status and accumulate tx statistics */
-+    for (;;)
-+    {
-+        if (tp->tx_finished_desc == tx_hw_complete_desc)   /* complete tx processing */
-+        {
-+            break;
-+        }
-+    	if (tp->tx_finished_desc->frame_ctrl.bits_tx_in.own == CPU)
-+    	{
-+#if (GMAC_DEBUG==1)
-+    	    if ( (tp->tx_finished_desc->frame_ctrl.bits_tx_in.derr) ||
-+    	         (tp->tx_finished_desc->frame_ctrl.bits_tx_in.perr) )
-+    	    {
-+    	        printk("%s::Descriptor Processing Error !!!\n",__func__);
-+    	    }
-+#endif
-+            if (tp->tx_finished_desc->frame_ctrl.bits_tx_in.success_tx == 1)
-+            {
-+                tp->stats.tx_bytes += tp->tx_finished_desc->flag_status.bits_tx_flag.frame_count;
-+                tp->stats.tx_packets ++;
-+            }
-+            else
-+            {
-+                tp->stats.tx_errors++;
-+            }
-+            desc_cnt = tp->tx_finished_desc->frame_ctrl.bits_tx_in.desc_count;
-+        	for (i=1; itx_finished_desc - tx_desc_start_adr[dev_index]) / sizeof(GMAC_DESCRIPTOR_T);
-+                /* free skb buffer */
-+                if (tx_skb[dev_index][index])
-+                {
-+		            dev_kfree_skb_irq(tx_skb[dev_index][index]);
-+		        }
-+        	    /* release Tx descriptor to CPU */
-+                tp->tx_finished_desc = (GMAC_DESCRIPTOR_T *)((tp->tx_finished_desc->next_desc.next_descriptor & 0xfffffff0)+tx_desc_virtual_base[dev_index]);
-+                tp->tx_finished_desc->frame_ctrl.bits_tx_in.own = CPU;
-+         	}
-+            /* get tx skb buffer index */
-+            index = ((unsigned int)tp->tx_finished_desc - tx_desc_start_adr[dev_index]) / sizeof(GMAC_DESCRIPTOR_T);
-+            /* free skb buffer */
-+            if (tx_skb[dev_index][index])
-+            {
-+	            dev_kfree_skb_irq(tx_skb[dev_index][index]);
-+	        }
-+            tp->tx_finished_desc = (GMAC_DESCRIPTOR_T *)((tp->tx_finished_desc->next_desc.next_descriptor & 0xfffffff0)+tx_desc_virtual_base[dev_index]);
-+     	}
-+    }
-+
-+	if (netif_queue_stopped(dev))
-+	{
-+	    netif_wake_queue(dev);
-+	}
-+
-+}
-+
-+
-+#endif
-+
-+#if 0
-+static void gmac_weird_interrupt(struct net_device *dev)
-+{
-+    gmac_dump_register(dev);
-+}
-+#endif
-+
-+/* The interrupt handler does all of the Rx thread work and cleans up
-+   after the Tx thread. */
-+static irqreturn_t gmac_interrupt (int irq, void *dev_instance, struct pt_regs *regs)
-+{
-+	struct net_device       *dev = (struct net_device *)dev_instance;
-+	GMAC_RXDMA_FIRST_DESC_T	rxdma_busy;
-+//	GMAC_TXDMA_FIRST_DESC_T	txdma_busy;
-+//    GMAC_TXDMA_CTRL_T       txdma_ctrl,txdma_ctrl_mask;
-+    GMAC_RXDMA_CTRL_T       rxdma_ctrl,rxdma_ctrl_mask;
-+	GMAC_DMA_STATUS_T	    status;
-+    unsigned int            i,dev_index;
-+	int                     handled = 0;
-+
-+    dev_index = gmac_select_interface(dev);
-+
-+	handled = 1;
-+
-+#ifdef CONFIG_SL_NAPI
-+	disable_irq(gmac_irq[dev_index]);   /* disable GMAC interrupt */
-+
-+    status.bits32 = gmac_read_reg(gmac_base_addr[dev_index] + GMAC_DMA_STATUS);	 /* read DMA status */
-+    gmac_write_reg(gmac_base_addr[dev_index] + GMAC_DMA_STATUS,status.bits32,status.bits32);    /* clear DMA status */
-+
-+    if (status.bits.rx_overrun == 1)
-+    {
-+		printk("%s::RX Overrun !!!%d\n",__func__,gmac_read_reg(gmac_base_addr[dev_index] + GMAC_RBNR));
-+         gmac_dump_register(dev);
-+        /* if RX DMA process is stoped , restart it */
-+        rxdma_busy.bits32 = gmac_read_reg(gmac_base_addr[dev_index] + GMAC_RXDMA_FIRST_DESC) ;
-+        if (rxdma_busy.bits.rd_busy == 0)
-+        {
-+            /* restart Rx DMA process */
-+	        rxdma_ctrl.bits32 = 0;
-+	        rxdma_ctrl.bits.rd_start = 1;    /* start RX DMA transfer */
-+            rxdma_ctrl.bits.rd_continue = 1; /* continue RX DMA operation */
-+            rxdma_ctrl_mask.bits32 = 0;
-+	        rxdma_ctrl_mask.bits.rd_start = 1;
-+            rxdma_ctrl_mask.bits.rd_continue = 1;
-+            gmac_write_reg(gmac_base_addr[dev_index] + GMAC_RXDMA_CTRL,rxdma_ctrl.bits32,rxdma_ctrl_mask.bits32);
-+        }
-+    }
-+
-+    /* process rx packet */
-+   	if (netif_running(dev) && ((status.bits.rs_eofi==1)||(status.bits.rs_finish==1)))
-+   	{
-+        if (likely(netif_rx_schedule_prep(dev)))
-+        {
-+            gmac_write_reg(gmac_base_addr[dev_index] + GMAC_RXDMA_CTRL,0,0x0007c000);   /* disable rx interrupt */
-+            __netif_rx_schedule(dev);
-+        }
-+    }
-+#ifndef CONFIG_TXINT_DISABLE
-+    /* process tx packet */
-+	if (netif_running(dev) && ((status.bits.ts_eofi==1)||(status.bits.ts_finish==1)))
-+	{
-+		gmac_tx_packet_complete(dev);
-+	}
-+#endif
-+
-+	enable_irq(gmac_irq[dev_index]);    /* enable GMAC interrupt */
-+    return IRQ_RETVAL(handled);
-+#endif
-+
-+   /* disable GMAC interrupt */
-+	disable_irq(gmac_irq[dev_index]);
-+    for (i=0;ipriv;
-+	GMAC_TXDMA_CURR_DESC_T	tx_desc;
-+	GMAC_RXDMA_CURR_DESC_T	rx_desc;
-+    GMAC_TXDMA_CTRL_T       txdma_ctrl,txdma_ctrl_mask;
-+    GMAC_RXDMA_CTRL_T       rxdma_ctrl,rxdma_ctrl_mask;
-+	GMAC_DMA_STATUS_T       dma_status,dma_status_mask;
-+	int						dev_index;
-+
-+    dev_index = gmac_select_interface(dev);
-+
-+	/* program TxDMA Current Descriptor Address register for first descriptor */
-+	tx_desc.bits32 = (unsigned int)(tp->tx_desc_dma);
-+	tx_desc.bits.eofie = 1;
-+	tx_desc.bits.sof_eof = 0x03;
-+	gmac_write_reg(gmac_base_addr[dev_index] + GMAC_TXDMA_CURR_DESC,tx_desc.bits32,0xffffffff);
-+	gmac_write_reg(gmac_base_addr[dev_index] + 0xff2c,tx_desc.bits32,0xffffffff);   /* tx next descriptor address */
-+
-+	/* program RxDMA Current Descriptor Address register for first descriptor */
-+	rx_desc.bits32 = (unsigned int)(tp->rx_desc_dma);
-+	rx_desc.bits.eofie = 1;
-+	rx_desc.bits.sof_eof = 0x03;
-+	gmac_write_reg(gmac_base_addr[dev_index] + GMAC_RXDMA_CURR_DESC,rx_desc.bits32,0xffffffff);
-+	gmac_write_reg(gmac_base_addr[dev_index] + 0xff3c,rx_desc.bits32,0xffffffff);   /* rx next descriptor address */
-+
-+	/* enable GMAC interrupt & disable loopback */
-+	dma_status.bits32 = 0;
-+	dma_status.bits.loop_back = 0;  /* disable DMA loop-back mode */
-+//	dma_status.bits.m_tx_fail = 1;
-+	dma_status.bits.m_cnt_full = 1;
-+	dma_status.bits.m_rx_pause_on = 1;
-+	dma_status.bits.m_tx_pause_on = 1;
-+	dma_status.bits.m_rx_pause_off = 1;
-+	dma_status.bits.m_tx_pause_off = 1;
-+	dma_status.bits.m_rx_overrun = 1;
-+	dma_status.bits.m_link_change = 1;
-+	dma_status_mask.bits32 = 0;
-+	dma_status_mask.bits.loop_back = 1;
-+//	dma_status_mask.bits.m_tx_fail = 1;
-+	dma_status_mask.bits.m_cnt_full = 1;
-+	dma_status_mask.bits.m_rx_pause_on = 1;
-+	dma_status_mask.bits.m_tx_pause_on = 1;
-+	dma_status_mask.bits.m_rx_pause_off = 1;
-+	dma_status_mask.bits.m_tx_pause_off = 1;
-+	dma_status_mask.bits.m_rx_overrun = 1;
-+	dma_status_mask.bits.m_link_change = 1;
-+	gmac_write_reg(gmac_base_addr[dev_index] + GMAC_DMA_STATUS,dma_status.bits32,dma_status_mask.bits32);
-+
-+    /* program tx dma control register */
-+	txdma_ctrl.bits32 = 0;
-+	txdma_ctrl.bits.td_start = 0;    /* start TX DMA transfer */
-+	txdma_ctrl.bits.td_continue = 0; /* continue Tx DMA operation */
-+	txdma_ctrl.bits.td_chain_mode = 1;  /* chain mode */
-+	txdma_ctrl.bits.td_prot = 0;
-+	txdma_ctrl.bits.td_burst_size = 2;  /* DMA burst size for every AHB request */
-+	txdma_ctrl.bits.td_bus = 2;         /* peripheral bus width */
-+	txdma_ctrl.bits.td_endian = 0;      /* little endian */
-+#ifdef CONFIG_TXINT_DISABLE
-+	txdma_ctrl.bits.td_finish_en = 0;   /* DMA finish event interrupt disable */
-+#else
-+	txdma_ctrl.bits.td_finish_en = 1;   /* DMA finish event interrupt enable */
-+#endif
-+	txdma_ctrl.bits.td_fail_en = 1;     /* DMA fail interrupt enable */
-+	txdma_ctrl.bits.td_perr_en = 1;     /* protocol failure interrupt enable */
-+	txdma_ctrl.bits.td_eod_en = 0;      /* disable Tx End of Descriptor Interrupt */
-+	//txdma_ctrl.bits.td_eod_en = 0;      /* disable Tx End of Descriptor Interrupt */
-+#ifdef CONFIG_TXINT_DISABLE
-+	txdma_ctrl.bits.td_eof_en = 0;      /* end of frame interrupt disable */
-+#else
-+	txdma_ctrl.bits.td_eof_en = 1;      /* end of frame interrupt enable */
-+#endif
-+	txdma_ctrl_mask.bits32 = 0;
-+	txdma_ctrl_mask.bits.td_start = 1;
-+	txdma_ctrl_mask.bits.td_continue = 1;
-+	txdma_ctrl_mask.bits.td_chain_mode = 1;
-+	txdma_ctrl_mask.bits.td_prot = 15;
-+	txdma_ctrl_mask.bits.td_burst_size = 3;
-+	txdma_ctrl_mask.bits.td_bus = 3;
-+	txdma_ctrl_mask.bits.td_endian = 1;
-+	txdma_ctrl_mask.bits.td_finish_en = 1;
-+	txdma_ctrl_mask.bits.td_fail_en = 1;
-+	txdma_ctrl_mask.bits.td_perr_en = 1;
-+	txdma_ctrl_mask.bits.td_eod_en = 1;
-+	//txdma_ctrl_mask.bits.td_eod_en = 1;
-+	txdma_ctrl_mask.bits.td_eof_en = 1;
-+	gmac_write_reg(gmac_base_addr[dev_index] + GMAC_TXDMA_CTRL,txdma_ctrl.bits32,txdma_ctrl_mask.bits32);
-+
-+    /* program rx dma control register */
-+	rxdma_ctrl.bits32 = 0;
-+	rxdma_ctrl.bits.rd_start = 1;    /* start RX DMA transfer */
-+	rxdma_ctrl.bits.rd_continue = 1; /* continue RX DMA operation */
-+	rxdma_ctrl.bits.rd_chain_mode = 1;  /* chain mode */
-+	rxdma_ctrl.bits.rd_prot = 0;
-+	rxdma_ctrl.bits.rd_burst_size = 2;  /* DMA burst size for every AHB request */
-+	rxdma_ctrl.bits.rd_bus = 2;         /* peripheral bus width */
-+	rxdma_ctrl.bits.rd_endian = 0;      /* little endian */
-+	rxdma_ctrl.bits.rd_finish_en = 1;   /* DMA finish event interrupt enable */
-+	rxdma_ctrl.bits.rd_fail_en = 1;     /* DMA fail interrupt enable */
-+	rxdma_ctrl.bits.rd_perr_en = 1;     /* protocol failure interrupt enable */
-+	rxdma_ctrl.bits.rd_eod_en = 0;      /* disable Rx End of Descriptor Interrupt */
-+	rxdma_ctrl.bits.rd_eof_en = 1;      /* end of frame interrupt enable */
-+	rxdma_ctrl_mask.bits32 = 0;
-+	rxdma_ctrl_mask.bits.rd_start = 1;
-+	rxdma_ctrl_mask.bits.rd_continue = 1;
-+	rxdma_ctrl_mask.bits.rd_chain_mode = 1;
-+	rxdma_ctrl_mask.bits.rd_prot = 15;
-+	rxdma_ctrl_mask.bits.rd_burst_size = 3;
-+	rxdma_ctrl_mask.bits.rd_bus = 3;
-+	rxdma_ctrl_mask.bits.rd_endian = 1;
-+	rxdma_ctrl_mask.bits.rd_finish_en = 1;
-+	rxdma_ctrl_mask.bits.rd_fail_en = 1;
-+	rxdma_ctrl_mask.bits.rd_perr_en = 1;
-+	rxdma_ctrl_mask.bits.rd_eod_en = 1;
-+	rxdma_ctrl_mask.bits.rd_eof_en = 1;
-+	gmac_write_reg(gmac_base_addr[dev_index] + GMAC_RXDMA_CTRL,rxdma_ctrl.bits32,rxdma_ctrl_mask.bits32);
-+    return;
-+}
-+
-+static void gmac_hw_stop(struct net_device *dev)
-+{
-+    GMAC_TXDMA_CTRL_T       txdma_ctrl,txdma_ctrl_mask;
-+    GMAC_RXDMA_CTRL_T       rxdma_ctrl,rxdma_ctrl_mask;
-+	int 					dev_index;
-+
-+    dev_index = gmac_select_interface(dev);
-+
-+    /* program tx dma control register */
-+	txdma_ctrl.bits32 = 0;
-+	txdma_ctrl.bits.td_start = 0;
-+	txdma_ctrl.bits.td_continue = 0;
-+	txdma_ctrl_mask.bits32 = 0;
-+	txdma_ctrl_mask.bits.td_start = 1;
-+	txdma_ctrl_mask.bits.td_continue = 1;
-+	gmac_write_reg(gmac_base_addr[dev_index] + GMAC_TXDMA_CTRL,txdma_ctrl.bits32,txdma_ctrl_mask.bits32);
-+    /* program rx dma control register */
-+	rxdma_ctrl.bits32 = 0;
-+	rxdma_ctrl.bits.rd_start = 0;    /* stop RX DMA transfer */
-+	rxdma_ctrl.bits.rd_continue = 0; /* stop continue RX DMA operation */
-+	rxdma_ctrl_mask.bits32 = 0;
-+	rxdma_ctrl_mask.bits.rd_start = 1;
-+	rxdma_ctrl_mask.bits.rd_continue = 1;
-+	gmac_write_reg(gmac_base_addr[dev_index] + GMAC_RXDMA_CTRL,rxdma_ctrl.bits32,rxdma_ctrl_mask.bits32);
-+}
-+
-+static int gmac_init_desc_buf(struct net_device *dev)
-+{
-+	struct gmac_private *tp = dev->priv;
-+	struct sk_buff 		*skb;
-+	dma_addr_t          tx_first_desc_dma=0;
-+	dma_addr_t          rx_first_desc_dma=0;
-+	dma_addr_t          rx_first_buf_dma=0;
-+	unsigned int        i,index;
-+
-+    printk("Descriptor buffer init......\n");
-+
-+    /* get device index number */
-+    index = gmac_get_dev_index(dev);
-+#ifdef CONFIG_SL2312_MPAGE
-+	for (i=0; itx_desc = DMA_MALLOC(TX_DESC_NUM*sizeof(GMAC_DESCRIPTOR_T),(dma_addr_t *)&tp->tx_desc_dma);
-+    tx_desc_virtual_base[index] = (unsigned int)tp->tx_desc - (unsigned int)tp->tx_desc_dma;
-+    memset(tp->tx_desc,0x00,TX_DESC_NUM*sizeof(GMAC_DESCRIPTOR_T));
-+	tp->rx_desc = DMA_MALLOC(RX_DESC_NUM*sizeof(GMAC_DESCRIPTOR_T),(dma_addr_t *)&tp->rx_desc_dma);
-+    rx_desc_virtual_base[index] = (unsigned int)tp->rx_desc - (unsigned int)tp->rx_desc_dma;
-+    memset(tp->rx_desc,0x00,RX_DESC_NUM*sizeof(GMAC_DESCRIPTOR_T));
-+    tx_desc_start_adr[index] = (unsigned int)tp->tx_desc;   /* for tx skb index calculation */
-+    rx_desc_start_adr[index] = (unsigned int)tp->rx_desc;   /* for rx skb index calculation */
-+    printk("tx_desc = %08x\n",(unsigned int)tp->tx_desc);
-+    printk("rx_desc = %08x\n",(unsigned int)tp->rx_desc);
-+	printk("tx_desc_dma = %08x\n",tp->tx_desc_dma);
-+	printk("rx_desc_dma = %08x\n",tp->rx_desc_dma);
-+
-+	if (tp->tx_desc==0x00 || tp->rx_desc==0x00)
-+	{
-+		free_irq(dev->irq, dev);
-+
-+		if (tp->tx_desc)
-+			DMA_MFREE(tp->tx_desc, TX_DESC_NUM*sizeof(GMAC_DESCRIPTOR_T),tp->tx_desc_dma);
-+		if (tp->rx_desc)
-+			DMA_MFREE(tp->rx_desc, RX_DESC_NUM*sizeof(GMAC_DESCRIPTOR_T),tp->rx_desc_dma);
-+		return -ENOMEM;
-+	}
-+
-+	/* TX descriptors initial */
-+	tp->tx_cur_desc = tp->tx_desc;  /* virtual address */
-+	tp->tx_finished_desc = tp->tx_desc; /* virtual address */
-+	tx_first_desc_dma = tp->tx_desc_dma; /* physical address */
-+	for (i = 1; i < TX_DESC_NUM; i++)
-+	{
-+		tp->tx_desc->frame_ctrl.bits_tx_out.own = CPU; /* set owner to CPU */
-+		tp->tx_desc->frame_ctrl.bits_tx_out.buffer_size = TX_BUF_SIZE;  /* set tx buffer size for descriptor */
-+		tp->tx_desc_dma = tp->tx_desc_dma + sizeof(GMAC_DESCRIPTOR_T); /* next tx descriptor DMA address */
-+		tp->tx_desc->next_desc.next_descriptor = tp->tx_desc_dma | 0x0000000b;
-+		tp->tx_desc = &tp->tx_desc[1] ; /* next tx descriptor virtual address */
-+	}
-+	/* the last descriptor will point back to first descriptor */
-+	tp->tx_desc->frame_ctrl.bits_tx_out.own = CPU;
-+	tp->tx_desc->frame_ctrl.bits_tx_out.buffer_size = TX_BUF_SIZE;
-+	tp->tx_desc->next_desc.next_descriptor = tx_first_desc_dma | 0x0000000b;
-+	tp->tx_desc = tp->tx_cur_desc;
-+	tp->tx_desc_dma = tx_first_desc_dma;
-+
-+	/* RX descriptors initial */
-+	tp->rx_cur_desc = tp->rx_desc;  /* virtual address */
-+	rx_first_desc_dma = tp->rx_desc_dma; /* physical address */
-+	for (i = 1; i < RX_DESC_NUM; i++)
-+	{
-+        if ( (skb = dev_alloc_skb(RX_BUF_SIZE))==NULL)  /* allocate socket buffer */
-+        {
-+            printk("%s::skb buffer allocation fail !\n",__func__);
-+        }
-+        rx_skb[index][i-1] = skb;
-+        tp->rx_desc->buf_adr = (unsigned int)__pa(skb->data) | 0x02;    /* insert two bytes in the beginning of rx data */
-+		tp->rx_desc->frame_ctrl.bits_rx.own = DMA;  /* set owner bit to DMA */
-+		tp->rx_desc->frame_ctrl.bits_rx.buffer_size = RX_BUF_SIZE; /* set rx buffer size for descriptor */
-+		tp->rx_bufs_dma = tp->rx_bufs_dma + RX_BUF_SIZE;    /* point to next buffer address */
-+		tp->rx_desc_dma = tp->rx_desc_dma + sizeof(GMAC_DESCRIPTOR_T); /* next rx descriptor DMA address */
-+		tp->rx_desc->next_desc.next_descriptor = tp->rx_desc_dma | 0x0000000b;
-+		tp->rx_desc = &tp->rx_desc[1]; /* next rx descriptor virtual address */
-+	}
-+	/* the last descriptor will point back to first descriptor */
-+    if ( (skb = dev_alloc_skb(RX_BUF_SIZE))==NULL)  /* allocate socket buffer */
-+    {
-+        printk("%s::skb buffer allocation fail !\n",__func__);
-+    }
-+    rx_skb[index][i-1] = skb;
-+    tp->rx_desc->buf_adr = (unsigned int)__pa(skb->data) | 0x02;    /* insert two bytes in the beginning of rx data */
-+	tp->rx_desc->frame_ctrl.bits_rx.own = DMA;
-+	tp->rx_desc->frame_ctrl.bits_rx.buffer_size = RX_BUF_SIZE;
-+	tp->rx_desc->next_desc.next_descriptor = rx_first_desc_dma | 0x0000000b;
-+	tp->rx_desc = tp->rx_cur_desc;
-+	tp->rx_desc_dma = rx_first_desc_dma;
-+	tp->rx_bufs_dma = rx_first_buf_dma;
-+
-+	for (i=0; itx_desc_hdr[i] = 0;
-+		tp->tx_desc_tail[i] = 0;
-+	}
-+	return (0);
-+}
-+
-+static int gmac_clear_counter (struct net_device *dev)
-+{
-+	struct gmac_private *tp = dev->priv;
-+	unsigned int    dev_index;
-+
-+    dev_index = gmac_select_interface(dev);
-+//	tp = gmac_dev[index]->priv;
-+    /* clear counter */
-+    gmac_read_reg(gmac_base_addr[dev_index] + GMAC_IN_DISCARDS);
-+    gmac_read_reg(gmac_base_addr[dev_index] + GMAC_IN_ERRORS);
-+    tp->stats.tx_bytes = 0;
-+    tp->stats.tx_packets = 0;
-+	tp->stats.tx_errors = 0;
-+    tp->stats.rx_bytes = 0;
-+	tp->stats.rx_packets = 0;
-+	tp->stats.rx_errors = 0;
-+    tp->stats.rx_dropped = 0;
-+	return (0);
-+}
-+
-+static int gmac_open (struct net_device *dev)
-+{
-+	struct gmac_private     *tp = dev->priv;
-+	int    retval;
-+
-+    gmac_select_interface(dev);
-+
-+	/* chip reset */
-+	gmac_sw_reset(dev);
-+
-+    /* allocates tx/rx descriptor and buffer memory */
-+    gmac_init_desc_buf(dev);
-+
-+    /* get mac address from FLASH */
-+    gmac_get_mac_address();
-+
-+    /* set PHY register to start autonegition process */
-+    gmac_set_phy_status(dev);
-+
-+	/* GMAC initialization */
-+	if (gmac_init_chip(dev))
-+	{
-+		printk (KERN_ERR "GMAC init fail\n");
-+	}
-+
-+    /* start DMA process */
-+	gmac_hw_start(dev);
-+
-+    /* enable tx/rx register */
-+    gmac_enable_tx_rx(dev);
-+
-+    /* clear statistic counter */
-+    gmac_clear_counter(dev);
-+
-+   	netif_start_queue (dev);
-+
-+    /* hook ISR */
-+	retval = request_irq (dev->irq, gmac_interrupt, SA_INTERRUPT, dev->name, dev);
-+	if (retval)
-+		return retval;
-+
-+	if(!FLAG_SWITCH)
-+	{
-+    	init_waitqueue_head (&tp->thr_wait);
-+    	init_completion(&tp->thr_exited);
-+
-+    	tp->time_to_die = 0;
-+    	tp->thr_pid = kernel_thread (gmac_phy_thread, dev, CLONE_FS | CLONE_FILES);
-+    	if (tp->thr_pid < 0)
-+    	{
-+    		printk (KERN_WARNING "%s: unable to start kernel thread\n",dev->name);
-+    	}
-+    }
-+	return (0);
-+}
-+
-+static int gmac_close(struct net_device *dev)
-+{
-+    struct gmac_private *tp = dev->priv;
-+    unsigned int        i,dev_index;
-+    unsigned int        ret;
-+
-+    dev_index = gmac_get_dev_index(dev);
-+
-+    /* stop tx/rx packet */
-+    gmac_disable_tx_rx(dev);
-+
-+    /* stop the chip's Tx and Rx DMA processes */
-+	gmac_hw_stop(dev);
-+
-+    netif_stop_queue(dev);
-+
-+    /* disable interrupts by clearing the interrupt mask */
-+    synchronize_irq();
-+    free_irq(dev->irq,dev);
-+
-+	DMA_MFREE(tp->tx_desc, TX_DESC_NUM*sizeof(GMAC_DESCRIPTOR_T),(unsigned int)tp->tx_desc_dma);
-+	DMA_MFREE(tp->rx_desc, RX_DESC_NUM*sizeof(GMAC_DESCRIPTOR_T),(unsigned int)tp->rx_desc_dma);
-+
-+#ifdef CONFIG_SL2312_MPAGE
-+//	kfree(tx_skb);
-+#endif
-+
-+    for (i=0;ithr_pid >= 0)
-+    	{
-+		    tp->time_to_die = 1;
-+    		wmb();
-+    		ret = kill_proc (tp->thr_pid, SIGTERM, 1);
-+    		if (ret)
-+    		{
-+    			printk (KERN_ERR "%s: unable to signal thread\n", dev->name);
-+    			return ret;
-+    		}
-+//    		wait_for_completion (&tp->thr_exited);
-+    	}
-+    }
-+
-+    return (0);
-+}
-+
-+#ifdef CONFIG_SL2312_MPAGE
-+int printk_all(int dev_index, struct gmac_private* tp)
-+{
-+	int i=0;
-+    unsigned int tx_current_descriptor = 0;
-+    int hw_index;
-+    int fi;
-+    GMAC_DESCRIPTOR_T* tmp_desc;
-+
-+	GMAC_DESCRIPTOR_T* cur_desc=tp->tx_cur_desc;
-+	fi = ((unsigned int)cur_desc - tx_desc_start_adr[dev_index]) / sizeof(GMAC_DESCRIPTOR_T);
-+	printk("tmp_desc %x, id %d\n", (int)cur_desc, fi);
-+
-+	tmp_desc = (GMAC_DESCRIPTOR_T*)((gmac_read_reg(gmac_base_addr[dev_index] + GMAC_TXDMA_CURR_DESC) & 0xfffffff0) + tx_desc_virtual_base[dev_index]);
-+	hw_index = ((unsigned int)tmp_desc - tx_desc_start_adr[dev_index])/ sizeof(GMAC_DESCRIPTOR_T);
-+	printk("hd_desc %x, ind %d, fin desc %x\n",(int)tmp_desc, hw_index, (int)tp->tx_finished_desc);
-+
-+	for (i=0; i ", fi, hw_index);
-+		printk("fc %8x ", tmp_desc->frame_ctrl.bits32);
-+		printk("fs %8x ", tmp_desc->flag_status.bits32);
-+		printk("fb %8x ", tmp_desc->buf_adr);
-+		printk("fd %8x\n",  tmp_desc->next_desc.next_descriptor);
-+	  	tmp_desc = (GMAC_DESCRIPTOR_T*)((tmp_desc->next_desc.next_descriptor & 0xfffffff0) + tx_desc_virtual_base[dev_index]);
-+		fi = ((unsigned int)tmp_desc - tx_desc_start_adr[dev_index]) / sizeof(GMAC_DESCRIPTOR_T);
-+	}
-+    tx_current_descriptor = gmac_read_reg(gmac_base_addr[dev_index] + GMAC_TXDMA_CURR_DESC);
-+    printk("%s: tx current descriptor = %x \n",__func__,tx_current_descriptor);
-+    printk("%s: interrupt status = %x \n",__func__,int_status);
-+    return 0;
-+}
-+
-+int cleanup_desc(int dev_index, struct gmac_private* tp)
-+{
-+	int i=0;
-+	int index = ((unsigned int)tp->tx_cur_desc - tx_desc_start_adr[dev_index])/sizeof(GMAC_DESCRIPTOR_T);
-+	GMAC_DESCRIPTOR_T* fill_desc = tp->tx_cur_desc;
-+
-+	for (i=0; i< TX_DESC_NUM; i++)
-+	{
-+		fill_desc->frame_ctrl.bits_tx_out.own = CPU;
-+		fill_desc->frame_ctrl.bits_tx_out.buffer_size = TX_BUF_SIZE;
-+		tx_skb[dev_index][index].desc_in_use = 0;
-+		free_tx_buf(dev_index, index);
-+		printk("cleanup di %d\n", index);
-+		fill_desc = (GMAC_DESCRIPTOR_T*)((fill_desc->next_desc.next_descriptor & 0xfffffff0) + tx_desc_virtual_base[dev_index]);
-+		index++;
-+		if (index > TX_DESC_NUM)
-+			index = 0;
-+	}
-+	return 1;
-+}
-+
-+size_t get_available_tx_desc(struct net_device* dev, int dev_index)
-+{
-+	struct gmac_private *tp = dev->priv;
-+	unsigned int desc_hdr = tp->tx_desc_hdr[dev_index];
-+	unsigned int desc_tail = tp->tx_desc_tail[dev_index];
-+	int available_desc_num = (TX_DESC_NUM - desc_hdr + desc_tail) & (TX_DESC_NUM-1);
-+	if (!available_desc_num) {
-+		if (tx_skb[dev_index][desc_hdr].desc_in_use)
-+			return 0;
-+		else
-+			return TX_DESC_NUM;
-+	}
-+	return available_desc_num;
-+}
-+
-+int check_free_tx_desc(int dev_index, int n, GMAC_DESCRIPTOR_T* desc)
-+{
-+	int i,index;
-+	GMAC_DESCRIPTOR_T* tmp_desc = desc;
-+
-+	if (n > TX_DESC_NUM)
-+		return 0;
-+
-+	index = ((unsigned int)tmp_desc - tx_desc_start_adr[dev_index])/sizeof(GMAC_DESCRIPTOR_T);
-+	for (i=0; i> 12) & 0x000F)
-+
-+inline int fill_in_desc(int dev_index, GMAC_DESCRIPTOR_T *desc, char* data, int len, int total_len, int sof, int freeable, int ownership, struct sk_buff* skb)
-+{
-+	int index = ((unsigned int)desc - tx_desc_start_adr[dev_index]) / sizeof(GMAC_DESCRIPTOR_T);
-+
-+	if (desc->frame_ctrl.bits_tx_in.own == CPU)
-+	{
-+		tx_skb[dev_index][index].freeable = freeable;
-+		if ((sof & 0x01) && skb) {
-+			tx_skb[dev_index][index].skb = skb;
-+		}
-+		else
-+			tx_skb[dev_index][index].skb = 0;
-+
-+		if (sof != 2)
-+			tx_skb[dev_index][index].desc_in_use = 1;
-+		else
-+			tx_skb[dev_index][index].desc_in_use = 0;
-+
-+		consistent_sync(data, len, PCI_DMA_TODEVICE);
-+		desc->buf_adr = (unsigned int)__pa(data);
-+		desc->frame_ctrl.bits_tx_out.buffer_size = len;
-+		desc->flag_status.bits_tx_flag.frame_count = total_len;
-+		desc->next_desc.bits.eofie = 1;
-+		desc->next_desc.bits.sof_eof = sof;
-+		desc->frame_ctrl.bits_tx_out.vlan_enable = 0;
-+		desc->frame_ctrl.bits_tx_out.ip_csum_en = 1;     /* TSS IPv4 IP header checksum enable */
-+		desc->frame_ctrl.bits_tx_out.ipv6_tx_en = 1;    /* TSS IPv6 tx enable */
-+		desc->frame_ctrl.bits_tx_out.tcp_csum_en = 1;    /* TSS TCP checksum enable */
-+		desc->frame_ctrl.bits_tx_out.udp_csum_en = 1;    /* TSS UDP checksum enable */
-+        wmb();
-+		desc->frame_ctrl.bits_tx_out.own = ownership;
-+//		consistent_sync(desc, sizeof(GMAC_DESCRIPTOR_T), PCI_DMA_TODEVICE);
-+	}
-+	return 0;
-+}
-+#endif
-+
-+static int gmac_start_xmit(struct sk_buff *skb, struct net_device *dev)
-+{
-+	struct gmac_private     *tp = dev->priv;
-+	GMAC_TXDMA_CTRL_T		tx_ctrl,tx_ctrl_mask;
-+	GMAC_TXDMA_FIRST_DESC_T	txdma_busy;
-+	unsigned int            len = skb->len;
-+	unsigned int            dev_index;
-+	static unsigned int     pcount = 0;
-+#ifdef CONFIG_SL2312_MPAGE
-+    GMAC_DESCRIPTOR_T *fill_desc;
-+	int snd_pages = skb_shinfo(skb)->nr_frags;  /* get number of descriptor */
-+	int desc_needed = 1; // for jumbo packet, one descriptor is enough.
-+	int header_len = skb->len;
-+    struct iphdr	*ip_hdr;
-+    struct tcphdr	*tcp_hdr;
-+    int             tcp_hdr_len;
-+    int             data_len;
-+    int             prv_index;
-+    long            seq_num;
-+    int             first_desc_index;
-+    int             ownership, freeable;
-+    int             eof;
-+	int             i=0;
-+#endif
-+#ifdef CONFIG_TXINT_DISABLE
-+	int				available_desc_cnt = 0;
-+#endif
-+
-+    dev_index = gmac_select_interface(dev);
-+
-+#ifdef CONFIG_TXINT_DISABLE
-+	available_desc_cnt = get_available_tx_desc(dev, dev_index);
-+
-+	if (available_desc_cnt < (TX_DESC_NUM >> 2)) {
-+		gmac_tx_packet_complete(dev);
-+	}
-+#endif
-+
-+#ifdef CONFIG_SL2312_MPAGE
-+
-+	fill_desc = tp->tx_cur_desc;
-+	if(!fill_desc) {
-+		printk("cur_desc is NULL!\n");
-+		return -1;
-+	}
-+
-+	if (storlink_ctl.recvfile==2)
-+	{
-+	    printk("snd_pages=%d skb->len=%d\n",snd_pages,skb->len);
-+	}
-+
-+	if (snd_pages)
-+		desc_needed += snd_pages;   /* decriptors needed for this large packet */
-+
-+	if (!check_free_tx_desc(dev_index, desc_needed, fill_desc)) {
-+		printk("no available desc!\n");
-+        gmac_dump_register(dev);
-+		printk_all(dev_index, tp);
-+		tp->stats.tx_dropped++;
-+		if (pcount++ > 10)
-+		{
-+		    for (;;);
-+		}
-+		return -1;
-+	}
-+
-+	first_desc_index = ((unsigned int)fill_desc - tx_desc_start_adr[dev_index]) / sizeof(GMAC_DESCRIPTOR_T);
-+
-+	/* check if the tcp packet is in order*/
-+	ip_hdr = (struct iphdr*) &(skb->data[14]);
-+	tcp_hdr = (struct tcphdr*) &(skb->data[14+ip_hdr->ihl * 4]);
-+	tcp_hdr_len = TCPHDRLEN(tcp_hdr) * 4;
-+	data_len = skb->len - 14 - ip_hdr->ihl *4 - tcp_hdr_len;
-+
-+	prv_index = first_desc_index-1;
-+	if (prv_index <0)
-+	    prv_index += TX_DESC_NUM;
-+	seq_num = ntohl(tcp_hdr->seq);
-+
-+	if (snd_pages)
-+	{
-+		// calculate header length
-+		// check fragment total length and header len = skb len - frag len
-+		// or parse the header.
-+		for (i=0; ifrags[i];
-+			header_len -= frag->size;
-+		}
-+		ownership = CPU;
-+		freeable = 0;
-+		/* fill header into first descriptor */
-+		fill_in_desc(dev_index, fill_desc, skb->data, header_len, len, 2, freeable, ownership, 0);
-+		fill_desc = (GMAC_DESCRIPTOR_T*)((fill_desc->next_desc.next_descriptor & 0xfffffff0) + tx_desc_virtual_base[dev_index]);
-+		tx_skb[dev_index][first_desc_index].end_seq = seq_num + data_len;
-+
-+		eof = 0;
-+		ownership = DMA;
-+		for (i=0; ifrags[i];
-+			int start_pos = frag->page_offset;
-+			char* data_buf = page_address(frag->page);
-+			int data_size = frag->size;
-+			int cur_index;
-+
-+			if (i == snd_pages-1)
-+			{
-+				eof=1;
-+				freeable = 1;
-+			}
-+			fill_in_desc(dev_index, fill_desc, data_buf+(start_pos), data_size,
-+			             len, eof, freeable, ownership, skb);
-+			cur_index = ((unsigned int)fill_desc - tx_desc_start_adr[dev_index]) / sizeof(GMAC_DESCRIPTOR_T);
-+
-+			fill_desc = (GMAC_DESCRIPTOR_T*)((fill_desc->next_desc.next_descriptor & 0xfffffff0) + tx_desc_virtual_base[dev_index]);
-+		}
-+		/* pass the ownership of the first descriptor to hardware */
-+//	    disable_irq(gmac_irq[dev_index]);
-+		tx_skb[dev_index][first_desc_index].desc_in_use = 1;
-+        wmb();
-+		tp->tx_cur_desc->frame_ctrl.bits_tx_out.own = DMA;
-+//		consistent_sync(tp->tx_cur_desc, sizeof(GMAC_DESCRIPTOR_T), PCI_DMA_TODEVICE);
-+		tp->tx_cur_desc = fill_desc;
-+		dev->trans_start = jiffies;
-+//	    enable_irq(gmac_irq[dev_index]);
-+	}
-+	else if ( tp->tx_cur_desc->frame_ctrl.bits_tx_out.own == CPU )
-+	{
-+//		tx_skb[dev_index][first_desc_index].end_seq = seq_num + data_len;
-+//	    disable_irq(gmac_irq[dev_index]);
-+		fill_in_desc(dev_index, tp->tx_cur_desc, skb->data, skb->len, skb->len, 3, 1, DMA, skb);
-+//	    enable_irq(gmac_irq[dev_index]);
-+		//consistent_sync(tp->tx_cur_desc, sizeof(GMAC_DESCRIPTOR_T), PCI_DMA_TODEVICE);
-+		tp->tx_cur_desc = (GMAC_DESCRIPTOR_T*)((tp->tx_cur_desc->next_desc.next_descriptor & 0xfffffff0) + tx_desc_virtual_base[dev_index]);
-+		dev->trans_start = jiffies;
-+	}
-+	else
-+	{
-+		printk("gmac tx drop!\n");
-+		tp->stats.tx_dropped++;
-+		return -1;
-+	}
-+
-+#ifdef CONFIG_TXINT_DISABLE
-+	tp->tx_desc_hdr[dev_index] = (tp->tx_desc_hdr[dev_index] + desc_needed) & (TX_DESC_NUM-1);
-+#endif
-+
-+#else
-+    if ((tp->tx_cur_desc->frame_ctrl.bits_tx_out.own == CPU) && (len < TX_BUF_SIZE))
-+	{
-+        index = ((unsigned int)tp->tx_cur_desc - tx_desc_start_adr[dev_index]) / sizeof(GMAC_DESCRIPTOR_T);
-+        tx_skb[dev_index][index] = skb;
-+        consistent_sync(skb->data,skb->len,PCI_DMA_TODEVICE);
-+        tp->tx_cur_desc->buf_adr = (unsigned int)__pa(skb->data);
-+    	tp->tx_cur_desc->flag_status.bits_tx_flag.frame_count = len;    /* total frame byte count */
-+    	tp->tx_cur_desc->next_desc.bits.sof_eof = 0x03;                 /*only one descriptor*/
-+		tp->tx_cur_desc->frame_ctrl.bits_tx_out.buffer_size = len;      /* descriptor byte count */
-+        tp->tx_cur_desc->frame_ctrl.bits_tx_out.vlan_enable = 0;
-+        tp->tx_cur_desc->frame_ctrl.bits_tx_out.ip_csum_en = 0;     /* TSS IPv4 IP header checksum enable */
-+        tp->tx_cur_desc->frame_ctrl.bits_tx_out.ipv6_tx_en = 0 ;    /* TSS IPv6 tx enable */
-+        tp->tx_cur_desc->frame_ctrl.bits_tx_out.tcp_csum_en = 0;    /* TSS TCP checksum enable */
-+        tp->tx_cur_desc->frame_ctrl.bits_tx_out.udp_csum_en = 0;    /* TSS UDP checksum enable */
-+        wmb();
-+    	tp->tx_cur_desc->frame_ctrl.bits_tx_out.own = DMA;	        /* set owner bit */
-+    	tp->tx_cur_desc = (GMAC_DESCRIPTOR_T *)((tp->tx_cur_desc->next_desc.next_descriptor & 0xfffffff0)+tx_desc_virtual_base[dev_index]);
-+    	dev->trans_start = jiffies;
-+	}
-+	else
-+	{
-+	 	/* no free tx descriptor */
-+		dev_kfree_skb(skb);
-+	    netif_stop_queue(dev);
-+		tp->stats.tx_dropped++;
-+		return (-1);
-+	}
-+#endif
-+ 	/* if TX DMA process is stoped , restart it */
-+	txdma_busy.bits32 = gmac_read_reg(gmac_base_addr[dev_index] + GMAC_TXDMA_FIRST_DESC);
-+	if (txdma_busy.bits.td_busy == 0)
-+	{
-+		/* restart DMA process */
-+		tx_ctrl.bits32 = 0;
-+		tx_ctrl.bits.td_start = 1;
-+		tx_ctrl.bits.td_continue = 1;
-+		tx_ctrl_mask.bits32 = 0;
-+		tx_ctrl_mask.bits.td_start = 1;
-+		tx_ctrl_mask.bits.td_continue = 1;
-+		gmac_write_reg(gmac_base_addr[dev_index] + GMAC_TXDMA_CTRL,tx_ctrl.bits32,tx_ctrl_mask.bits32);
-+	}
-+	return (0);
-+}
-+
-+
-+struct net_device_stats * gmac_get_stats(struct net_device *dev)
-+{
-+    struct gmac_private *tp = dev->priv;
-+    unsigned long       flags;
-+    unsigned int        pkt_drop;
-+    unsigned int        pkt_error;
-+    unsigned int        dev_index;
-+
-+    dev_index = gmac_select_interface(dev);
-+
-+//	if (storlink_ctl.recvfile==3)
-+//	{
-+//        printk("GMAC_GLOBAL_BASE_ADDR=%x\n", readl(GMAC_GLOBAL_BASE_ADDR+0x30));
-+//        gmac_dump_register(dev);
-+//        printk_all(0, dev);
-+//    }
-+
-+    if (netif_running(dev))
-+    {
-+        /* read H/W counter */
-+        spin_lock_irqsave(&tp->lock,flags);
-+        pkt_drop = gmac_read_reg(gmac_base_addr[dev_index] + GMAC_IN_DISCARDS);
-+        pkt_error = gmac_read_reg(gmac_base_addr[dev_index] + GMAC_IN_ERRORS);
-+        tp->stats.rx_dropped = tp->stats.rx_dropped + pkt_drop;
-+        tp->stats.rx_errors = tp->stats.rx_errors + pkt_error;
-+        spin_unlock_irqrestore(&tp->lock,flags);
-+    }
-+    return &tp->stats;
-+}
-+
-+static unsigned const ethernet_polynomial = 0x04c11db7U;
-+static inline u32 ether_crc (int length, unsigned char *data)
-+{
-+	int crc = -1;
-+	unsigned int i;
-+	unsigned int crc_val=0;
-+
-+	while (--length >= 0) {
-+		unsigned char current_octet = *data++;
-+		int bit;
-+		for (bit = 0; bit < 8; bit++, current_octet >>= 1)
-+			crc = (crc << 1) ^ ((crc < 0) ^ (current_octet & 1) ?
-+			     ethernet_polynomial : 0);
-+	}
-+	crc = ~crc;
-+	for (i=0;i<32;i++)
-+	{
-+		crc_val = crc_val + (((crc << i) & 0x80000000) >> (31-i));
-+	}
-+	return crc_val;
-+}
-+
-+static void gmac_set_rx_mode(struct net_device *dev)
-+{
-+    GMAC_RX_FLTR_T      filter;
-+	unsigned int        mc_filter[2];	/* Multicast hash filter */
-+    int                 bit_nr;
-+	unsigned int        i, dev_index;
-+
-+    dev_index = gmac_select_interface(dev);
-+
-+//    printk("%s : dev->flags = %x \n",__func__,dev->flags);
-+//    dev->flags |= IFF_ALLMULTI;  /* temp */
-+    filter.bits32 = 0;
-+    filter.bits.error = 0;
-+	if (dev->flags & IFF_PROMISC)
-+	{
-+	    filter.bits.error = 1;
-+        filter.bits.promiscuous = 1;
-+        filter.bits.broadcast = 1;
-+        filter.bits.multicast = 1;
-+        filter.bits.unicast = 1;
-+		mc_filter[1] = mc_filter[0] = 0xffffffff;
-+	}
-+	else if (dev->flags & IFF_ALLMULTI)
-+	{
-+        filter.bits.promiscuous = 1;
-+        filter.bits.broadcast = 1;
-+        filter.bits.multicast = 1;
-+        filter.bits.unicast = 1;
-+		mc_filter[1] = mc_filter[0] = 0xffffffff;
-+	}
-+	else
-+	{
-+		struct dev_mc_list *mclist;
-+
-+        filter.bits.promiscuous = 1;
-+        filter.bits.broadcast = 1;
-+        filter.bits.multicast = 1;
-+        filter.bits.unicast = 1;
-+		mc_filter[1] = mc_filter[0] = 0;
-+		for (i = 0, mclist = dev->mc_list; mclist && i < dev->mc_count;i++, mclist = mclist->next)
-+		{
-+            bit_nr = ether_crc(ETH_ALEN,mclist->dmi_addr) & 0x0000003f;
-+            if (bit_nr < 32)
-+            {
-+                mc_filter[0] = mc_filter[0] | (1<dev_addr[i] = sock->sa_data[i];
-+	}
-+
-+    reg_val = dev->dev_addr[0] + (dev->dev_addr[1]<<8) + (dev->dev_addr[2]<<16) + (dev->dev_addr[3]<<24);
-+    gmac_write_reg(gmac_base_addr[dev_index] + GMAC_STA_ADD0,reg_val,0xffffffff);
-+    reg_val = dev->dev_addr[4] + (dev->dev_addr[5]<<8) ;
-+    gmac_write_reg(gmac_base_addr[dev_index] + GMAC_STA_ADD1,reg_val,0x0000ffff);
-+    memcpy(ð0_mac[0],&dev->dev_addr[0],6);
-+    printk("Storlink %s address = ",dev->name);
-+    printk("%02x",dev->dev_addr[0]);
-+    printk("%02x",dev->dev_addr[1]);
-+    printk("%02x",dev->dev_addr[2]);
-+    printk("%02x",dev->dev_addr[3]);
-+    printk("%02x",dev->dev_addr[4]);
-+    printk("%02x\n",dev->dev_addr[5]);
-+
-+    return (0);
-+}
-+
-+static void gmac_tx_timeout(struct net_device *dev)
-+{
-+	GMAC_TXDMA_CTRL_T	        tx_ctrl,tx_ctrl_mask;
-+    GMAC_TXDMA_FIRST_DESC_T     txdma_busy;
-+    int							dev_index;
-+
-+    dev_index = gmac_select_interface(dev);
-+
-+    /* if TX DMA process is stoped , restart it */
-+	txdma_busy.bits32 = gmac_read_reg(gmac_base_addr[dev_index] + GMAC_TXDMA_FIRST_DESC);
-+	if (txdma_busy.bits.td_busy == 0)
-+	{
-+		/* restart DMA process */
-+		tx_ctrl.bits32 = 0;
-+		tx_ctrl.bits.td_start = 1;
-+		tx_ctrl.bits.td_continue = 1;
-+		tx_ctrl_mask.bits32 = 0;
-+		tx_ctrl_mask.bits.td_start = 1;
-+		tx_ctrl_mask.bits.td_continue = 1;
-+		gmac_write_reg(gmac_base_addr[dev_index] + GMAC_TXDMA_CTRL,tx_ctrl.bits32,tx_ctrl_mask.bits32);
-+	}
-+	netif_wake_queue(dev);
-+    return;
-+}
-+
-+static int gmac_netdev_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
-+{
-+	int rc = 0;
-+    unsigned char *hwa = rq->ifr_ifru.ifru_hwaddr.sa_data;
-+
-+	if (!netif_running(dev))
-+	{
-+	    printk("Before changing the H/W address,please down the device.\n");
-+		return -EINVAL;
-+    }
-+
-+	switch (cmd) {
-+	case SIOCETHTOOL:
-+        break;
-+
-+    case SIOCSIFHWADDR:
-+        gmac_set_mac_address(dev,hwa);
-+        break;
-+
-+	case SIOCGMIIPHY:	/* Get the address of the PHY in use. */
-+	case SIOCDEVPRIVATE:	/* binary compat, remove in 2.5 */
-+        break;
-+
-+	case SIOCGMIIREG:	/* Read the specified MII register. */
-+	case SIOCDEVPRIVATE+1:
-+		break;
-+
-+	case SIOCSMIIREG:	/* Write the specified MII register */
-+	case SIOCDEVPRIVATE+2:
-+		break;
-+
-+	default:
-+		rc = -EOPNOTSUPP;
-+		break;
-+	}
-+
-+	return rc;
-+}
-+
-+static void gmac_cleanup_module(void)
-+{
-+    int i;
-+
-+    for (i=0;ipriv;
-+
-+		dev[i]->base_addr = gmac_base_addr[i];
-+		dev[i]->irq = gmac_irq[i];
-+	    dev[i]->open = gmac_open;
-+	    dev[i]->stop = gmac_close;
-+		dev[i]->hard_start_xmit = gmac_start_xmit;
-+		dev[i]->get_stats = gmac_get_stats;
-+		dev[i]->set_multicast_list = gmac_set_rx_mode;
-+		dev[i]->set_mac_address = gmac_set_mac_address;
-+		dev[i]->do_ioctl = gmac_netdev_ioctl;
-+		dev[i]->tx_timeout = gmac_tx_timeout;
-+		dev[i]->watchdog_timeo = TX_TIMEOUT;
-+		dev[i]->features |= NETIF_F_SG|NETIF_F_HW_CSUM|NETIF_F_TSO;
-+#ifdef CONFIG_SL_NAPI
-+        printk("NAPI driver is enabled.\n");
-+        if (i==0)
-+        {
-+	        dev[i]->poll = gmac_rx_poll_ga;
-+	        dev[i]->weight = 64;
-+	    }
-+	    else
-+	    {
-+	        dev[i]->poll = gmac_rx_poll_gb;
-+	        dev[i]->weight = 64;
-+	    }
-+#endif
-+
-+		if (register_netdev(dev[i]))
-+		{
-+			gmac_cleanup_module();
-+			return(-1);
-+		}
-+	}
-+
-+#ifdef CONFIG_SL3516_ASIC
-+{
-+    unsigned int    val;
-+
-+    /* set GMAC global register */
-+    val = readl(GMAC_GLOBAL_BASE_ADDR+0x10);
-+    val = val | 0x005a0000;
-+    writel(val,GMAC_GLOBAL_BASE_ADDR+0x10);
-+    writel(0x07f007f0,GMAC_GLOBAL_BASE_ADDR+0x1c);
-+    writel(0x77770000,GMAC_GLOBAL_BASE_ADDR+0x20);
-+    writel(0x77770000,GMAC_GLOBAL_BASE_ADDR+0x24);
-+	val = readl(GMAC_GLOBAL_BASE_ADDR+0x04);
-+	if((val&(1<<20))==0){           // GMAC1 enable
-+ 		val = readl(GMAC_GLOBAL_BASE_ADDR+0x30);
-+		val = (val & 0xe7ffffff) | 0x08000000;
-+		writel(val,GMAC_GLOBAL_BASE_ADDR+0x30);
-+	}
-+
-+}
-+#endif
-+
-+//	printk("%s: dev0=%x  dev1=%x \n",__func__,dev[0],dev[1]);
-+//	FLAG_SWITCH = 0 ;
-+//	FLAG_SWITCH = SPI_get_identifier();
-+//	if(FLAG_SWITCH)
-+//	{
-+//		printk("Configure ADM699X...\n");
-+//		SPI_default();	//Add by jason for ADM699X configuration
-+//	}
-+	return (0);
-+}
-+
-+
-+module_init(gmac_init_module);
-+module_exit(gmac_cleanup_module);
-+
-+static int gmac_phy_thread (void *data)
-+{
-+	struct net_device   *dev = data;
-+	struct gmac_private *tp = dev->priv;
-+	unsigned long       timeout;
-+
-+    daemonize("%s", dev->name);
-+	allow_signal(SIGTERM);
-+//	reparent_to_init();
-+//	spin_lock_irq(¤t->sigmask_lock);
-+//	sigemptyset(¤t->blocked);
-+//	recalc_sigpending(current);
-+//	spin_unlock_irq(¤t->sigmask_lock);
-+//	strncpy (current->comm, dev->name, sizeof(current->comm) - 1);
-+//	current->comm[sizeof(current->comm) - 1] = '\0';
-+
-+	while (1)
-+	{
-+	    timeout = next_tick;
-+		do
-+		{
-+			timeout = interruptible_sleep_on_timeout (&tp->thr_wait, timeout);
-+		} while (!signal_pending (current) && (timeout > 0));
-+
-+		if (signal_pending (current))
-+		{
-+//			spin_lock_irq(¤t->sigmask_lock);
-+			flush_signals(current);
-+//			spin_unlock_irq(¤t->sigmask_lock);
-+		}
-+
-+		if (tp->time_to_die)
-+			break;
-+
-+//        printk("%s : Polling PHY Status...%x\n",__func__,dev);
-+		rtnl_lock ();
-+        gmac_get_phy_status(dev);
-+		rtnl_unlock ();
-+	}
-+	complete_and_exit (&tp->thr_exited, 0);
-+}
-+
-+static void gmac_set_phy_status(struct net_device *dev)
-+{
-+    GMAC_STATUS_T   status;
-+    unsigned int    reg_val;
-+    unsigned int    i = 0;
-+    unsigned int    index;
-+
-+    if (FLAG_SWITCH==1)
-+    {
-+        return; /* GMAC connects to a switch chip, not PHY */
-+    }
-+
-+    index = gmac_get_dev_index(dev);
-+
-+    if (index == 0)
-+    {
-+//    	mii_write(phy_addr[index],0x04,0x0461); /* advertisement 10M full duplex, pause capable on */
-+//    	mii_write(phy_addr[index],0x04,0x0421); /* advertisement 10M half duplex, pause capable on */
-+    	mii_write(phy_addr[index],0x04,0x05e1); /* advertisement 100M full duplex, pause capable on */
-+//    	mii_write(phy_addr[index],0x04,0x04a1); /* advertisement 100M half duplex, pause capable on */
-+#ifdef CONFIG_SL3516_ASIC
-+    	mii_write(phy_addr[index],0x09,0x0300); /* advertisement 1000M full duplex, pause capable on */
-+//    	mii_write(phy_addr[index],0x09,0x0000); /* advertisement 1000M full duplex, pause capable on */
-+#endif
-+    }
-+    else
-+    {
-+//    	mii_write(phy_addr[index],0x04,0x0461); /* advertisement 10M full duplex, pause capable on */
-+//    	mii_write(phy_addr[index],0x04,0x0421); /* advertisement 10M half duplex, pause capable on */
-+    	mii_write(phy_addr[index],0x04,0x05e1); /* advertisement 100M full duplex, pause capable on */
-+//    	mii_write(phy_addr[index],0x04,0x04a1); /* advertisement 100M half duplex, pause capable on */
-+#ifdef CONFIG_SL3516_ASIC
-+//    	mii_write(phy_addr[index],0x09,0x0000); /* advertisement no 1000M */
-+    	mii_write(phy_addr[index],0x09,0x0300); /* advertisement 1000M full duplex, pause capable on */
-+#endif
-+	}
-+
-+    mii_write(phy_addr[index],0x00,0x1200); /* Enable and Restart Auto-Negotiation */
-+    mii_write(phy_addr[index],0x18,0x0041); /* Enable Active led */
-+    while (((reg_val=mii_read(phy_addr[index],0x01)) & 0x00000004)!=0x04)
-+    {
-+        i++;
-+        if (i > 30)
-+        {
-+            break;
-+        }
-+	msleep(100);
-+    }
-+    if (i>30)
-+    {
-+        pre_phy_status[index] = LINK_DOWN;
-+		clear_bit(__LINK_STATE_START, &dev->state);
-+        netif_stop_queue(dev);
-+        storlink_ctl.link = 0;
-+        printk("Link Down (%04x) ",reg_val);
-+    }
-+    else
-+    {
-+        pre_phy_status[index] = LINK_UP;
-+		set_bit(__LINK_STATE_START, &dev->state);
-+        netif_wake_queue(dev);
-+        storlink_ctl.link = 1;
-+        printk("Link Up (%04x) ",reg_val);
-+    }
-+
-+    status.bits32 = 0;
-+    reg_val = mii_read(phy_addr[index],10);
-+    printk("reg_val0 = %x \n",reg_val);
-+    if ((reg_val & 0x0800) == 0x0800)
-+    {
-+        status.bits.duplex = 1;
-+        status.bits.speed = 2;
-+        printk(" 1000M/Full \n");
-+    }
-+    else if ((reg_val & 0x0400) == 0x0400)
-+    {
-+        status.bits.duplex = 0;
-+        status.bits.speed = 2;
-+        printk(" 1000M/Half \n");
-+    }
-+    else
-+    {
-+        reg_val = (mii_read(phy_addr[index],0x05) & 0x05E0) >> 5;
-+        printk("reg_val1 = %x \n",reg_val);
-+        if ((reg_val & 0x08)==0x08) /* 100M full duplex */
-+        {
-+                status.bits.duplex = 1;
-+                status.bits.speed = 1;
-+                printk(" 100M/Full \n");
-+        }
-+        else if ((reg_val & 0x04)==0x04) /* 100M half duplex */
-+        {
-+                status.bits.duplex = 0;
-+                status.bits.speed = 1;
-+                printk(" 100M/Half \n");
-+        }
-+        else if ((reg_val & 0x02)==0x02) /* 10M full duplex */
-+        {
-+                status.bits.duplex = 1;
-+                status.bits.speed = 0;
-+                printk(" 10M/Full \n");
-+        }
-+        else if ((reg_val & 0x01)==0x01) /* 10M half duplex */
-+        {
-+                status.bits.duplex = 0;
-+                status.bits.speed = 0;
-+                printk(" 100M/Half \n");
-+        }
-+    }
-+
-+    reg_val = (mii_read(phy_addr[index],0x05) & 0x05E0) >> 5;
-+    if ((reg_val & 0x20)==0x20)
-+    {
-+        flow_control_enable[index] = 1;
-+        printk("Flow Control Enable. \n");
-+    }
-+    else
-+    {
-+        flow_control_enable[index] = 0;
-+        printk("Flow Control Disable. \n");
-+    }
-+    full_duplex = status.bits.duplex;
-+    speed = status.bits.speed;
-+}
-+
-+static void gmac_get_phy_status(struct net_device *dev)
-+{
-+	GMAC_CONFIG0_T	config0,config0_mask;
-+    GMAC_STATUS_T   status;
-+    unsigned int    reg_val;
-+    unsigned int    index;
-+
-+    index = gmac_select_interface(dev);
-+
-+    status.bits32 = 0;
-+    status.bits.phy_mode = 1;
-+
-+#ifdef CONFIG_SL3516_ASIC
-+    status.bits.mii_rmii = 2;   /* default value for ASIC version */
-+//    status.bits.speed = 1;
-+#else
-+    if (index==0)
-+        status.bits.mii_rmii = 0;
-+    else
-+        status.bits.mii_rmii = 2;
-+#endif
-+
-+    /* read PHY status register */
-+    reg_val = mii_read(phy_addr[index],0x01);
-+    if ((reg_val & 0x0024) == 0x0024) /* link is established and auto_negotiate process completed */
-+    {
-+        /* read PHY Auto-Negotiation Link Partner Ability Register */
-+        reg_val = mii_read(phy_addr[index],10);
-+        if ((reg_val & 0x0800) == 0x0800)
-+        {
-+            status.bits.mii_rmii = 3;  /* RGMII 1000Mbps mode */
-+            status.bits.duplex = 1;
-+            status.bits.speed = 2;
-+        }
-+        else if ((reg_val & 0x0400) == 0x0400)
-+        {
-+            status.bits.mii_rmii = 3;  /* RGMII 1000Mbps mode */
-+            status.bits.duplex = 0;
-+            status.bits.speed = 2;
-+        }
-+        else
-+        {
-+            reg_val = (mii_read(phy_addr[index],0x05) & 0x05E0) >> 5;
-+            if ((reg_val & 0x08)==0x08) /* 100M full duplex */
-+            {
-+                    status.bits.mii_rmii = 2;  /* RGMII 10/100Mbps mode */
-+                    status.bits.duplex = 1;
-+                    status.bits.speed = 1;
-+            }
-+            else if ((reg_val & 0x04)==0x04) /* 100M half duplex */
-+            {
-+                    status.bits.mii_rmii = 2;  /* RGMII 10/100Mbps mode */
-+                    status.bits.duplex = 0;
-+                    status.bits.speed = 1;
-+            }
-+            else if ((reg_val & 0x02)==0x02) /* 10M full duplex */
-+            {
-+                    status.bits.mii_rmii = 2;  /* RGMII 10/100Mbps mode */
-+                    status.bits.duplex = 1;
-+                    status.bits.speed = 0;
-+            }
-+            else if ((reg_val & 0x01)==0x01) /* 10M half duplex */
-+            {
-+                    status.bits.mii_rmii = 2;  /* RGMII 10/100Mbps mode */
-+                    status.bits.duplex = 0;
-+                    status.bits.speed = 0;
-+            }
-+        }
-+        status.bits.link = LINK_UP; /* link up */
-+        netif_wake_queue(dev);
-+
-+        reg_val = (mii_read(phy_addr[index],0x05) & 0x05E0) >> 5;
-+        if ((reg_val & 0x20)==0x20)
-+        {
-+            if (flow_control_enable[index] == 0)
-+            {
-+                config0.bits32 = 0;
-+                config0_mask.bits32 = 0;
-+                config0.bits.tx_fc_en = 1; /* enable tx flow control */
-+                config0.bits.rx_fc_en = 1; /* enable rx flow control */
-+                config0_mask.bits.tx_fc_en = 1;
-+                config0_mask.bits.rx_fc_en = 1;
-+                gmac_write_reg(gmac_base_addr[index] + GMAC_CONFIG0,config0.bits32,config0_mask.bits32);
-+//                printk("eth%d Flow Control Enable. \n",index);
-+            }
-+            flow_control_enable[index] = 1;
-+        }
-+        else
-+        {
-+            if (flow_control_enable[index] == 1)
-+            {
-+                config0.bits32 = 0;
-+                config0_mask.bits32 = 0;
-+                config0.bits.tx_fc_en = 0; /* disable tx flow control */
-+                config0.bits.rx_fc_en = 0; /* disable rx flow control */
-+                config0_mask.bits.tx_fc_en = 1;
-+                config0_mask.bits.rx_fc_en = 1;
-+                gmac_write_reg(gmac_base_addr[index] + GMAC_CONFIG0,config0.bits32,config0_mask.bits32);
-+//                printk("eth%d Flow Control Disable. \n",index);
-+            }
-+            flow_control_enable[index] = 0;
-+        }
-+
-+        if (pre_phy_status[index] == LINK_DOWN)
-+        {
-+            gmac_enable_tx_rx(dev);
-+            pre_phy_status[index] = LINK_UP;
-+			set_bit(__LINK_STATE_START, &dev->state);
-+			storlink_ctl.link = 1;
-+//			printk("eth%d Link Up ...\n",index);
-+        }
-+    }
-+    else
-+    {
-+        status.bits.link = LINK_DOWN; /* link down */
-+        netif_stop_queue(dev);
-+        flow_control_enable[index] = 0;
-+        storlink_ctl.link = 0;
-+        if (pre_phy_status[index] == LINK_UP)
-+        {
-+            gmac_disable_tx_rx(dev);
-+            pre_phy_status[index] = LINK_DOWN;
-+			clear_bit(__LINK_STATE_START, &dev->state);
-+//			printk("eth%d Link Down ...\n",index);
-+    	}
-+
-+    }
-+
-+    reg_val = gmac_read_reg(gmac_base_addr[index] + GMAC_STATUS);
-+    if (reg_val != status.bits32)
-+    {
-+        gmac_write_reg(gmac_base_addr[index] + GMAC_STATUS,status.bits32,0x0000007f);
-+    }
-+}
-+
-+/***************************************/
-+/* define GPIO module base address     */
-+/***************************************/
-+#define GPIO_BASE_ADDR  (IO_ADDRESS(SL2312_GPIO_BASE))
-+
-+/* define GPIO pin for MDC/MDIO */
-+
-+// for gemini ASIC
-+#ifdef CONFIG_SL3516_ASIC
-+#define H_MDC_PIN           22
-+#define H_MDIO_PIN          21
-+#define G_MDC_PIN           22
-+#define G_MDIO_PIN          21
-+#else
-+#define H_MDC_PIN           3
-+#define H_MDIO_PIN          2
-+#define G_MDC_PIN           0
-+#define G_MDIO_PIN          1
-+#endif
-+
-+//#define GPIO_MDC             0x80000000
-+//#define GPIO_MDIO            0x00400000
-+
-+static unsigned int GPIO_MDC = 0;
-+static unsigned int GPIO_MDIO = 0;
-+static unsigned int GPIO_MDC_PIN = 0;
-+static unsigned int GPIO_MDIO_PIN = 0;
-+
-+// For PHY test definition!!
-+#define LPC_EECK		0x02
-+#define LPC_EDIO		0x04
-+#define LPC_GPIO_SET		3
-+#define LPC_BASE_ADDR		IO_ADDRESS(IT8712_IO_BASE)
-+#define inb_gpio(x)		inb(LPC_BASE_ADDR + IT8712_GPIO_BASE + x)
-+#define outb_gpio(x, y)		outb(y, LPC_BASE_ADDR + IT8712_GPIO_BASE + x)
-+
-+enum GPIO_REG
-+{
-+    GPIO_DATA_OUT   = 0x00,
-+    GPIO_DATA_IN    = 0x04,
-+    GPIO_PIN_DIR    = 0x08,
-+    GPIO_BY_PASS    = 0x0c,
-+    GPIO_DATA_SET   = 0x10,
-+    GPIO_DATA_CLEAR = 0x14,
-+};
-+/***********************/
-+/*    MDC : GPIO[31]   */
-+/*    MDIO: GPIO[22]   */
-+/***********************/
-+
-+/***************************************************
-+* All the commands should have the frame structure:
-+*

-+****************************************************/
-+
-+/*****************************************************************
-+* Inject a bit to NWay register through CSR9_MDC,MDIO
-+*******************************************************************/
-+void mii_serial_write(char bit_MDO) // write data into mii PHY
-+{
-+#if 0 //def CONFIG_SL2312_LPC_IT8712
-+	unsigned char iomode,status;
-+
-+	iomode = LPCGetConfig(LDN_GPIO, 0xc8 + LPC_GPIO_SET);
-+	iomode |= (LPC_EECK|LPC_EDIO) ;				// Set EECK,EDIO,EECS output
-+	LPCSetConfig(LDN_GPIO, 0xc8 + LPC_GPIO_SET, iomode);
-+
-+	if(bit_MDO)
-+	{
-+		status = inb_gpio( LPC_GPIO_SET);
-+		status |= LPC_EDIO ;		//EDIO high
-+		outb_gpio(LPC_GPIO_SET, status);
-+	}
-+	else
-+	{
-+		status = inb_gpio( LPC_GPIO_SET);
-+		status &= ~(LPC_EDIO) ;		//EDIO low
-+		outb_gpio(LPC_GPIO_SET, status);
-+	}
-+
-+	status |= LPC_EECK ;		//EECK high
-+	outb_gpio(LPC_GPIO_SET, status);
-+
-+	status &= ~(LPC_EECK) ;		//EECK low
-+	outb_gpio(LPC_GPIO_SET, status);
-+
-+#else
-+    unsigned int addr;
-+    unsigned int value;
-+
-+    addr = GPIO_BASE_ADDR + GPIO_PIN_DIR;
-+    value = readl(addr) | GPIO_MDC | GPIO_MDIO; /* set MDC/MDIO Pin to output */
-+    writel(value,addr);
-+    if(bit_MDO)
-+    {
-+        addr = (GPIO_BASE_ADDR + GPIO_DATA_SET);
-+        writel(GPIO_MDIO,addr); /* set MDIO to 1 */
-+        addr = (GPIO_BASE_ADDR + GPIO_DATA_SET);
-+        writel(GPIO_MDC,addr); /* set MDC to 1 */
-+        addr = (GPIO_BASE_ADDR + GPIO_DATA_CLEAR);
-+        writel(GPIO_MDC,addr); /* set MDC to 0 */
-+    }
-+    else
-+    {
-+        addr = (GPIO_BASE_ADDR + GPIO_DATA_CLEAR);
-+        writel(GPIO_MDIO,addr); /* set MDIO to 0 */
-+        addr = (GPIO_BASE_ADDR + GPIO_DATA_SET);
-+        writel(GPIO_MDC,addr); /* set MDC to 1 */
-+        addr = (GPIO_BASE_ADDR + GPIO_DATA_CLEAR);
-+        writel(GPIO_MDC,addr); /* set MDC to 0 */
-+    }
-+
-+#endif
-+}
-+
-+/**********************************************************************
-+* read a bit from NWay register through CSR9_MDC,MDIO
-+***********************************************************************/
-+unsigned int mii_serial_read(void) // read data from mii PHY
-+{
-+#if 0 //def CONFIG_SL2312_LPC_IT8712
-+  	unsigned char iomode,status;
-+	unsigned int value ;
-+
-+	iomode = LPCGetConfig(LDN_GPIO, 0xc8 + LPC_GPIO_SET);
-+	iomode &= ~(LPC_EDIO) ;		// Set EDIO input
-+	iomode |= (LPC_EECK) ;		// Set EECK,EECS output
-+	LPCSetConfig(LDN_GPIO, 0xc8 + LPC_GPIO_SET, iomode);
-+
-+	status = inb_gpio( LPC_GPIO_SET);
-+	status |= LPC_EECK ;		//EECK high
-+	outb_gpio(LPC_GPIO_SET, status);
-+
-+	status &= ~(LPC_EECK) ;		//EECK low
-+	outb_gpio(LPC_GPIO_SET, status);
-+
-+	value = inb_gpio( LPC_GPIO_SET);
-+
-+	value = value>>2 ;
-+	value &= 0x01;
-+
-+	return value ;
-+
-+#else
-+    unsigned int *addr;
-+    unsigned int value;
-+
-+    addr = (unsigned int *)(GPIO_BASE_ADDR + GPIO_PIN_DIR);
-+    value = readl(addr) & ~GPIO_MDIO; //0xffbfffff;   /* set MDC to output and MDIO to input */
-+    writel(value,addr);
-+
-+    addr = (unsigned int *)(GPIO_BASE_ADDR + GPIO_DATA_SET);
-+    writel(GPIO_MDC,addr); /* set MDC to 1 */
-+    addr = (unsigned int *)(GPIO_BASE_ADDR + GPIO_DATA_CLEAR);
-+    writel(GPIO_MDC,addr); /* set MDC to 0 */
-+
-+    addr = (unsigned int *)(GPIO_BASE_ADDR + GPIO_DATA_IN);
-+    value = readl(addr);
-+    value = (value & (1<> GPIO_MDIO_PIN;
-+    return(value);
-+
-+#endif
-+}
-+
-+/***************************************
-+* preamble + ST
-+***************************************/
-+void mii_pre_st(void)
-+{
-+    unsigned char i;
-+
-+    for(i=0;i<32;i++) // PREAMBLE
-+        mii_serial_write(1);
-+    mii_serial_write(0); // ST
-+    mii_serial_write(1);
-+}
-+
-+
-+/******************************************
-+* Read MII register
-+* phyad -> physical address
-+* regad -> register address
-+***************************************** */
-+unsigned int mii_read(unsigned char phyad,unsigned char regad)
-+{
-+    unsigned int i,value;
-+    unsigned int bit;
-+
-+    if (phyad == GPHY_ADDR)
-+    {
-+        GPIO_MDC_PIN = G_MDC_PIN;   /* assigned MDC pin for giga PHY */
-+        GPIO_MDIO_PIN = G_MDIO_PIN; /* assigned MDIO pin for giga PHY */
-+    }
-+    else
-+    {
-+        GPIO_MDC_PIN = H_MDC_PIN;   /* assigned MDC pin for 10/100 PHY */
-+        GPIO_MDIO_PIN = H_MDIO_PIN; /* assigned MDIO pin for 10/100 PHY */
-+    }
-+    GPIO_MDC = (1<>(4-i)) & 0x01) ? 1 :0 ;
-+        mii_serial_write(bit);
-+    }
-+
-+    for (i=0;i<5;i++) { // REGAD
-+        bit= ((regad>>(4-i)) & 0x01) ? 1 :0 ;
-+        mii_serial_write(bit);
-+    }
-+
-+    mii_serial_read(); // TA_Z
-+//    if((bit=mii_serial_read()) !=0 ) // TA_0
-+//    {
-+//        return(0);
-+//    }
-+    value=0;
-+    for (i=0;i<16;i++) { // READ DATA
-+        bit=mii_serial_read();
-+        value += (bit<<(15-i)) ;
-+    }
-+
-+    mii_serial_write(0); // dumy clock
-+    mii_serial_write(0); // dumy clock
-+//printk("%s: phy_addr=%x reg_addr=%x value=%x \n",__func__,phyad,regad,value);
-+    return(value);
-+}
-+
-+/******************************************
-+* Write MII register
-+* phyad -> physical address
-+* regad -> register address
-+* value -> value to be write
-+***************************************** */
-+void mii_write(unsigned char phyad,unsigned char regad,unsigned int value)
-+{
-+    unsigned int i;
-+    char bit;
-+
-+printk("%s: phy_addr=%x reg_addr=%x value=%x \n",__func__,phyad,regad,value);
-+    if (phyad == GPHY_ADDR)
-+    {
-+        GPIO_MDC_PIN = G_MDC_PIN;   /* assigned MDC pin for giga PHY */
-+        GPIO_MDIO_PIN = G_MDIO_PIN; /* assigned MDIO pin for giga PHY */
-+    }
-+    else
-+    {
-+        GPIO_MDC_PIN = H_MDC_PIN;   /* assigned MDC pin for 10/100 PHY */
-+        GPIO_MDIO_PIN = H_MDIO_PIN; /* assigned MDIO pin for 10/100 PHY */
-+    }
-+    GPIO_MDC = (1<>(4-i)) & 0x01) ? 1 :0 ;
-+        mii_serial_write(bit);
-+    }
-+
-+    for (i=0;i<5;i++) { // REGAD
-+        bit= ((regad>>(4-i)) & 0x01) ? 1 :0 ;
-+        mii_serial_write(bit);
-+    }
-+    mii_serial_write(1); // TA_1
-+    mii_serial_write(0); // TA_0
-+
-+    for (i=0;i<16;i++) { // OUT DATA
-+        bit= ((value>>(15-i)) & 0x01) ? 1 : 0 ;
-+        mii_serial_write(bit);
-+    }
-+    mii_serial_write(0); // dumy clock
-+    mii_serial_write(0); // dumy clock
-+}
-+
-+
-+
-+
-+
-+
-+
-+
-+
-+/*				NOTES
-+ *   The instruction set of the 93C66/56/46/26/06 chips are as follows:
-+ *
-+ *               Start  OP	    *
-+ *     Function   Bit  Code  Address**  Data     Description
-+ *     -------------------------------------------------------------------
-+ *     READ        1    10   A7 - A0             Reads data stored in memory,
-+ *                                               starting at specified address
-+ *     EWEN        1    00   11XXXXXX            Write enable must precede
-+ *                                               all programming modes
-+ *     ERASE       1    11   A7 - A0             Erase register A7A6A5A4A3A2A1A0
-+ *     WRITE       1    01   A7 - A0   D15 - D0  Writes register
-+ *     ERAL        1    00   10XXXXXX            Erase all registers
-+ *     WRAL        1    00   01XXXXXX  D15 - D0  Writes to all registers
-+ *     EWDS        1    00   00XXXXXX            Disables all programming
-+ *                                               instructions
-+ *    *Note: A value of X for address is a don't care condition.
-+ *    **Note: There are 8 address bits for the 93C56/66 chips unlike
-+ *	      the 93C46/26/06 chips which have 6 address bits.
-+ *
-+ *   The 93Cx6 has a four wire interface: clock, chip select, data in, and
-+ *   data out.While the ADM6996 uning three interface: clock, chip select,and data line.
-+ *   The input and output are the same pin. ADM6996 can only recognize the write cmd.
-+ *   In order to perform above functions, you need
-+ *   1. to enable the chip select .
-+ *   2. send one clock of dummy clock
-+ *   3. send start bit and opcode
-+ *   4. send 8 bits address and 16 bits data
-+ *   5. to disable the chip select.
-+ *							Jason Lee 2003/07/30
-+ */
-+
-+/***************************************/
-+/* define GPIO module base address     */
-+/***************************************/
-+#define GPIO_EECS	     0x00400000		/*   EECS: GPIO[22]   */
-+//#define GPIO_MOSI	     0x20000000         /*   EEDO: GPIO[29]   send to 6996*/
-+#define GPIO_MISO	     0x40000000         /*   EEDI: GPIO[30]   receive from 6996*/
-+#define GPIO_EECK	     0x80000000         /*   EECK: GPIO[31]   */
-+
-+#define ADM_EECS		0x01
-+#define ADM_EECK		0x02
-+#define ADM_EDIO		0x04
-+/*************************************************************
-+* SPI protocol for ADM6996 control
-+**************************************************************/
-+#define SPI_OP_LEN	     0x03		// the length of start bit and opcode
-+#define SPI_OPWRITE	     0X05		// write
-+#define SPI_OPREAD	     0X06		// read
-+#define SPI_OPERASE	     0X07		// erase
-+#define SPI_OPWTEN	     0X04		// write enable
-+#define SPI_OPWTDIS	     0X04		// write disable
-+#define SPI_OPERSALL	     0X04		// erase all
-+#define SPI_OPWTALL	     0X04		// write all
-+
-+#define SPI_ADD_LEN	     8			// bits of Address
-+#define SPI_DAT_LEN	     16			// bits of Data
-+#define ADM6996_PORT_NO	     6			// the port number of ADM6996
-+#define ADM6999_PORT_NO	     9			// the port number of ADM6999
-+#ifdef CONFIG_ADM_6996
-+	#define ADM699X_PORT_NO		ADM6996_PORT_NO
-+#endif
-+#ifdef CONFIG_ADM_6999
-+	#define ADM699X_PORT_NO		ADM6999_PORT_NO
-+#endif
-+#define LPC_GPIO_SET		3
-+#define LPC_BASE_ADDR			IO_ADDRESS(IT8712_IO_BASE)
-+
-+extern int it8712_exist;
-+
-+#define inb_gpio(x)			inb(LPC_BASE_ADDR + IT8712_GPIO_BASE + x)
-+#define outb_gpio(x, y)		outb(y, LPC_BASE_ADDR + IT8712_GPIO_BASE + x)
-+
-+/****************************************/
-+/*	Function Declare		*/
-+/****************************************/
-+/*
-+void SPI_write(unsigned char addr,unsigned int value);
-+unsigned int SPI_read(unsigned char table,unsigned char addr);
-+void SPI_write_bit(char bit_EEDO);
-+unsigned int SPI_read_bit(void);
-+void SPI_default(void);
-+void SPI_reset(unsigned char rstype,unsigned char port_cnt);
-+void SPI_pre_st(void);
-+void SPI_CS_enable(unsigned char enable);
-+void SPI_Set_VLAN(unsigned char LAN,unsigned int port_mask);
-+void SPI_Set_tag(unsigned int port,unsigned tag);
-+void SPI_Set_PVID(unsigned int PVID,unsigned int port_mask);
-+void SPI_mac_lock(unsigned int port, unsigned char lock);
-+void SPI_get_port_state(unsigned int port);
-+void SPI_port_enable(unsigned int port,unsigned char enable);
-+
-+void SPI_get_status(unsigned int port);
-+*/
-+
-+struct PORT_CONFIG
-+{
-+	unsigned char auto_negotiation;	// 0:Disable	1:Enable
-+	unsigned char speed;		// 0:10M	1:100M
-+	unsigned char duplex;		// 0:Half	1:Full duplex
-+	unsigned char Tag;		// 0:Untag	1:Tag
-+	unsigned char port_disable;	// 0:port enable	1:disable
-+	unsigned char pvid;		// port VLAN ID 0001
-+	unsigned char mdix;		// Crossover judgement. 0:Disable 1:Enable
-+	unsigned char mac_lock;		// MAC address Lock 0:Disable 1:Enable
-+};
-+
-+struct PORT_STATUS
-+{
-+	unsigned char link;		// 0:not link	1:link established
-+	unsigned char speed;		// 0:10M	1:100M
-+	unsigned char duplex;		// 0:Half	1:Full duplex
-+	unsigned char flow_ctl;		// 0:flow control disable 1:enable
-+	unsigned char mac_lock;		// MAC address Lock 0:Disable 1:Enable
-+	unsigned char port_disable;	// 0:port enable	1:disable
-+
-+	// Serial Management
-+	unsigned long rx_pac_count;		//receive packet count
-+	unsigned long rx_pac_byte;		//receive packet byte count
-+	unsigned long tx_pac_count;		//transmit packet count
-+	unsigned long tx_pac_byte;		//transmit packet byte count
-+	unsigned long collision_count;		//error count
-+	unsigned long error_count ;
-+
-+	unsigned long rx_pac_count_overflow;		//overflow flag
-+	unsigned long rx_pac_byte_overflow;
-+	unsigned long tx_pac_count_overflow;
-+	unsigned long tx_pac_byte_overflow;
-+	unsigned long collision_count_overflow;
-+	unsigned long error_count_overflow;
-+};
-+
-+struct PORT_CONFIG port_config[ADM699X_PORT_NO];	// 0~3:LAN , 4:WAN , 5:MII
-+static struct PORT_STATUS port_state[ADM699X_PORT_NO];
-+
-+/******************************************
-+* SPI_write
-+* addr -> Write Address
-+* value -> value to be write
-+***************************************** */
-+void SPI_write(unsigned char addr,unsigned int value)
-+{
-+	int     i;
-+	char    bit;
-+#ifdef CONFIG_IT8712_GPIO
-+	char    status;
-+#else
-+    int     ad1;
-+#endif
-+
-+#ifdef CONFIG_IT8712_GPIO
-+	status = inb_gpio(LPC_GPIO_SET);
-+	status &= ~(ADM_EDIO) ;		//EDIO low
-+	outb_gpio(LPC_GPIO_SET, status);
-+#else
-+   	ad1 = (GPIO_BASE_ADDR + GPIO_DATA_CLEAR);
-+	writel(GPIO_MISO,ad1); /* set MISO to 0 */
-+#endif
-+	SPI_CS_enable(1);
-+
-+	SPI_write_bit(0);       //dummy clock
-+
-+	//send write command (0x05)
-+	for(i=SPI_OP_LEN-1;i>=0;i--)
-+	{
-+		bit = (SPI_OPWRITE>>i)& 0x01;
-+		SPI_write_bit(bit);
-+	}
-+	// send 8 bits address (MSB first, LSB last)
-+	for(i=SPI_ADD_LEN-1;i>=0;i--)
-+	{
-+		bit = (addr>>i)& 0x01;
-+		SPI_write_bit(bit);
-+	}
-+	// send 16 bits data (MSB first, LSB last)
-+	for(i=SPI_DAT_LEN-1;i>=0;i--)
-+	{
-+		bit = (value>>i)& 0x01;
-+		SPI_write_bit(bit);
-+	}
-+
-+	SPI_CS_enable(0);	// CS low
-+
-+	for(i=0;i<0xFFF;i++) ;
-+#ifdef CONFIG_IT8712_GPIO
-+	status = inb_gpio(LPC_GPIO_SET);
-+	status &= ~(ADM_EDIO) ;		//EDIO low
-+	outb_gpio(LPC_GPIO_SET, status);
-+#else
-+   	ad1 = (GPIO_BASE_ADDR + GPIO_DATA_CLEAR);
-+	writel(GPIO_MISO,ad1); /* set MISO to 0 */
-+#endif
-+}
-+
-+
-+/************************************
-+* SPI_write_bit
-+* bit_EEDO -> 1 or 0 to be written
-+************************************/
-+void SPI_write_bit(char bit_EEDO)
-+{
-+#ifdef CONFIG_IT8712_GPIO
-+	unsigned char iomode,status;
-+
-+	iomode = LPCGetConfig(LDN_GPIO, 0xc8 + LPC_GPIO_SET);
-+	iomode |= (ADM_EECK|ADM_EDIO|ADM_EECS) ;				// Set EECK,EDIO,EECS output
-+	LPCSetConfig(LDN_GPIO, 0xc8 + LPC_GPIO_SET, iomode);
-+
-+	if(bit_EEDO)
-+	{
-+		status = inb_gpio( LPC_GPIO_SET);
-+		status |= ADM_EDIO ;		//EDIO high
-+		outb_gpio(LPC_GPIO_SET, status);
-+	}
-+	else
-+	{
-+		status = inb_gpio( LPC_GPIO_SET);
-+		status &= ~(ADM_EDIO) ;		//EDIO low
-+		outb_gpio(LPC_GPIO_SET, status);
-+	}
-+
-+	status |= ADM_EECK ;		//EECK high
-+	outb_gpio(LPC_GPIO_SET, status);
-+
-+	status &= ~(ADM_EECK) ;		//EECK low
-+	outb_gpio(LPC_GPIO_SET, status);
-+
-+#else
-+	unsigned int addr;
-+	unsigned int value;
-+
-+	addr = (GPIO_BASE_ADDR + GPIO_PIN_DIR);
-+	value = readl(addr) |GPIO_EECK |GPIO_MISO ;   /* set EECK/MISO Pin to output */
-+	writel(value,addr);
-+	if(bit_EEDO)
-+	{
-+		addr = (GPIO_BASE_ADDR + GPIO_DATA_SET);
-+		writel(GPIO_MISO,addr); /* set MISO to 1 */
-+		writel(GPIO_EECK,addr); /* set EECK to 1 */
-+		addr = (GPIO_BASE_ADDR + GPIO_DATA_CLEAR);
-+		writel(GPIO_EECK,addr); /* set EECK to 0 */
-+	}
-+	else
-+	{
-+		addr = (GPIO_BASE_ADDR + GPIO_DATA_CLEAR);
-+		writel(GPIO_MISO,addr); /* set MISO to 0 */
-+		addr = (GPIO_BASE_ADDR + GPIO_DATA_SET);
-+		writel(GPIO_EECK,addr); /* set EECK to 1 */
-+		addr = (GPIO_BASE_ADDR + GPIO_DATA_CLEAR);
-+		writel(GPIO_EECK,addr); /* set EECK to 0 */
-+	}
-+
-+	return ;
-+#endif
-+}
-+
-+/**********************************************************************
-+* read a bit from ADM6996 register
-+***********************************************************************/
-+unsigned int SPI_read_bit(void) // read data from
-+{
-+#ifdef CONFIG_IT8712_GPIO
-+	unsigned char iomode,status;
-+	unsigned int value ;
-+
-+	iomode = LPCGetConfig(LDN_GPIO, 0xc8 + LPC_GPIO_SET);
-+	iomode &= ~(ADM_EDIO) ;		// Set EDIO input
-+	iomode |= (ADM_EECS|ADM_EECK) ;		// Set EECK,EECS output
-+	LPCSetConfig(LDN_GPIO, 0xc8 + LPC_GPIO_SET, iomode);
-+
-+	status = inb_gpio( LPC_GPIO_SET);
-+	status |= ADM_EECK ;		//EECK high
-+	outb_gpio(LPC_GPIO_SET, status);
-+
-+	status &= ~(ADM_EECK) ;		//EECK low
-+	outb_gpio(LPC_GPIO_SET, status);
-+
-+	value = inb_gpio( LPC_GPIO_SET);
-+
-+	value = value>>2 ;
-+	value &= 0x01;
-+
-+	return value ;
-+#else
-+	unsigned int addr;
-+	unsigned int value;
-+
-+	addr = (GPIO_BASE_ADDR + GPIO_PIN_DIR);
-+	value = readl(addr) & (~GPIO_MISO);   // set EECK to output and MISO to input
-+	writel(value,addr);
-+
-+	addr =(GPIO_BASE_ADDR + GPIO_DATA_SET);
-+	writel(GPIO_EECK,addr); // set EECK to 1
-+	addr = (GPIO_BASE_ADDR + GPIO_DATA_CLEAR);
-+	writel(GPIO_EECK,addr); // set EECK to 0
-+
-+	addr = (GPIO_BASE_ADDR + GPIO_DATA_IN);
-+	value = readl(addr) ;
-+	value = value >> 30;
-+	return value ;
-+#endif
-+}
-+
-+/******************************************
-+* SPI_default
-+* EEPROM content default value
-+*******************************************/
-+void SPI_default(void)
-+{
-+	int i;
-+#ifdef CONFIG_ADM_6999
-+	SPI_write(0x11,0xFF30);
-+	for(i=1;i<8;i++)
-+		SPI_write(i,0x840F);
-+
-+	SPI_write(0x08,0x880F);			//port 8 Untag, PVID=2
-+	SPI_write(0x09,0x881D);			//port 9 Tag, PVID=2 ,10M
-+	SPI_write(0x14,0x017F);			//Group 0~6,8 as VLAN 1
-+	SPI_write(0x15,0x0180);			//Group 7,8 as VLAN 2
-+#endif
-+
-+#ifdef CONFIG_ADM_6996
-+	SPI_write(0x11,0xFF30);
-+	SPI_write(0x01,0x840F);			//port 0~3 Untag ,PVID=1 ,100M ,duplex
-+	SPI_write(0x03,0x840F);
-+	SPI_write(0x05,0x840F);
-+	SPI_write(0x07,0x840F);
-+	SPI_write(0x08,0x880F);			//port 4 Untag, PVID=2
-+	SPI_write(0x09,0x881D);			//port 5 Tag, PVID=2 ,10M
-+	SPI_write(0x14,0x0155);			//Group 0~3,5 as VLAN 1
-+	SPI_write(0x15,0x0180);			//Group 4,5 as VLAN 2
-+
-+#endif
-+
-+	for(i=0x16;i<=0x22;i++)
-+		SPI_write((unsigned char)i,0x0000);		// clean VLAN¡@map 3~15
-+
-+	for (i=0;i reset type
-+*	    0:reset all count for 'port_cnt' port
-+*	    1:reset specified count 'port_cnt'
-+* port_cnt   ->  port number or counter index
-+***************************************************/
-+void SPI_reset(unsigned char rstype,unsigned char port_cnt)
-+{
-+
-+	int i;
-+#ifdef CONFIG_IT8712_GPIO
-+    char status;
-+#else
-+	int ad1;
-+#endif
-+	char bit;
-+
-+#ifdef CONFIG_IT8712_GPIO
-+	status = inb_gpio(LPC_GPIO_SET);
-+	status &= ~(ADM_EDIO) ;		//EDIO low
-+	outb_gpio(LPC_GPIO_SET, status);
-+#else
-+   	ad1 = (GPIO_BASE_ADDR + GPIO_DATA_CLEAR);
-+	writel(GPIO_MISO,ad1); /* set MISO to 0 */
-+#endif
-+
-+	SPI_CS_enable(0);	// CS low
-+
-+	SPI_pre_st(); // PRE+ST
-+	SPI_write_bit(0); // OP
-+	SPI_write_bit(1);
-+
-+	SPI_write_bit(1);		// Table select, must be 1 -> reset Counter
-+
-+	SPI_write_bit(0);		// Device Address
-+	SPI_write_bit(0);
-+
-+	rstype &= 0x01;
-+	SPI_write_bit(rstype);		// Reset type 0:clear dedicate port's all counters 1:clear dedicate counter
-+
-+	for (i=5;i>=0;i--) 		// port or cnt index
-+	{
-+		bit = port_cnt >> i ;
-+		bit &= 0x01 ;
-+		SPI_write_bit(bit);
-+	}
-+
-+	SPI_write_bit(0); 		// dumy clock
-+	SPI_write_bit(0); 		// dumy clock
-+
-+#ifdef CONFIG_IT8712_GPIO
-+	status = inb_gpio(LPC_GPIO_SET);
-+	status &= ~(ADM_EDIO) ;		//EDIO low
-+	outb_gpio(LPC_GPIO_SET, status);
-+#else
-+   	ad1 = (GPIO_BASE_ADDR + GPIO_DATA_CLEAR);
-+	writel(GPIO_MISO,ad1); /* set MISO to 0 */
-+#endif
-+}
-+
-+/*****************************************************
-+* SPI_pre_st
-+* preambler: 32 bits '1'   start bit: '01'
-+*****************************************************/
-+void SPI_pre_st(void)
-+{
-+	int i;
-+
-+	for(i=0;i<32;i++) // PREAMBLE
-+		SPI_write_bit(1);
-+	SPI_write_bit(0); // ST
-+	SPI_write_bit(1);
-+}
-+
-+
-+/***********************************************************
-+* SPI_CS_enable
-+* before access ,you have to enable Chip Select. (pull high)
-+* When fisish, you should pull low !!
-+*************************************************************/
-+void SPI_CS_enable(unsigned char enable)
-+{
-+#ifdef CONFIG_IT8712_GPIO
-+
-+	unsigned char iomode,status;
-+
-+	iomode = LPCGetConfig(LDN_GPIO, 0xc8 + LPC_GPIO_SET);
-+	iomode |= (ADM_EECK|ADM_EDIO|ADM_EECS) ;				// Set EECK,EDIO,EECS output
-+	LPCSetConfig(LDN_GPIO, 0xc8 + LPC_GPIO_SET, iomode);
-+
-+
-+	status = inb_gpio( LPC_GPIO_SET);
-+	if(enable)
-+		status |= ADM_EECS ;		//EECS high
-+	else
-+		status &= ~(ADM_EECS) ;	//EECS low
-+
-+	outb_gpio(LPC_GPIO_SET, status);
-+
-+
-+	status |= ADM_EECK ;		//EECK high
-+	outb_gpio(LPC_GPIO_SET, status);
-+
-+	status &= ~(ADM_EECK) ;		//EECK low
-+	outb_gpio(LPC_GPIO_SET, status);
-+
-+#else
-+	unsigned int addr,value;
-+
-+	addr = (GPIO_BASE_ADDR + GPIO_PIN_DIR);
-+	value = readl(addr) |GPIO_EECS |GPIO_EECK;   /* set EECS/EECK Pin to output */
-+	writel(value,addr);
-+
-+	if(enable)
-+	{
-+		addr = (GPIO_BASE_ADDR + GPIO_DATA_SET);
-+		writel(GPIO_EECS,addr); /* set EECS to 1 */
-+
-+	}
-+	else
-+	{
-+		addr = (GPIO_BASE_ADDR + GPIO_DATA_CLEAR);
-+		writel(GPIO_EECS,addr); /* set EECS to 0 */
-+		addr = (GPIO_BASE_ADDR + GPIO_DATA_SET);
-+		writel(GPIO_EECK,addr); /* set EECK to 1 */	// at least one clock after CS low
-+		addr = (GPIO_BASE_ADDR + GPIO_DATA_CLEAR);
-+		writel(GPIO_EECK,addr); /* set EECK to 0 */
-+	}
-+#endif
-+}
-+
-+/*********************************************************
-+* SPI_Set_VLAN: group ports as VLAN
-+* LAN  -> VLAN number : 0~16
-+* port_mask -> ports which would group as LAN
-+* 	       ex. 0x03 = 0000 0011
-+*			port 0 and port 1
-+*********************************************************/
-+void SPI_Set_VLAN(unsigned char LAN,unsigned int port_mask)
-+{
-+	unsigned int i,value=0;
-+	unsigned reg_add = 0x13 + LAN ;
-+
-+	for(i=0;i>= 1;
-+	}
-+
-+	SPI_write(reg_add,value);
-+}
-+
-+
-+/*******************************************
-+* SPI_Set_tag
-+* port -> port number to set tag or untag
-+* tag  -> 0/set untag,  1/set tag
-+* In general, tag is for MII port. LAN and
-+* WAN port is configed as untag!!
-+********************************************/
-+void SPI_Set_tag(unsigned int port,unsigned tag)
-+{
-+	unsigned int regadd,value;
-+
-+	// mapping port's register !! (0,1,2,3,4,5) ==> (1,3,5,7,8,9)
-+	if(port<=3)
-+		regadd=2*port+1;
-+	else if(port==4) regadd = 8 ;
-+	else regadd = 9 ;
-+
-+
-+	value = SPI_read(0,regadd);		//read original setting
-+
-+	if(tag)
-+		value |= 0x0010 ;		// set tag
-+	else
-+		value &= 0xFFEF ;		// set untag
-+
-+	SPI_write(regadd,value);		// write back!!
-+}
-+
-+/************************************************
-+* SPI_Set_PVID
-+* PVID -> PVID number :
-+* port_mask -> ports which would group as LAN
-+* 	       ex. 0x0F = 0000 1111 ==> port 0~3
-+************************************************/
-+void SPI_Set_PVID(unsigned int PVID,unsigned int port_mask)
-+{
-+	unsigned int i,value=0;
-+
-+	PVID &= 0x000F ;
-+
-+	for(i=0;i>= 1;
-+	}
-+}
-+
-+
-+/************************************************
-+* SPI_get_PVID
-+* port -> which ports to VID
-+************************************************/
-+unsigned int SPI_Get_PVID(unsigned int port)
-+{
-+	unsigned int value=0;
-+
-+	if (port>=ADM6996_PORT_NO)
-+		return 0;
-+
-+	switch(port)
-+	{
-+		case 0:
-+			value = SPI_read(0,0x01);	// read original value
-+			value &= 0x3C00 ;		// get VID
-+			value = value >> 10 ;		// Shift
-+			break;
-+		case 1:
-+			value = SPI_read(0,0x03);
-+			value &= 0x3C00 ;
-+			value = value >> 10 ;
-+			break;
-+		case 2:
-+			value = SPI_read(0,0x05);
-+			value &= 0x3C00 ;
-+			value = value >> 10 ;
-+			break;
-+		case 3:
-+			value = SPI_read(0,0x07);
-+			value &= 0x3C00 ;
-+			value = value >> 10 ;
-+			break;
-+		case 4:
-+			value = SPI_read(0,0x08);
-+			value &= 0x3C00 ;
-+			value = value >> 10 ;
-+			break;
-+		case 5:
-+			value = SPI_read(0,0x09);
-+			value &= 0x3C00 ;
-+			value = value >> 10 ;
-+			break;
-+	}
-+	return value ;
-+}
-+
-+
-+/**********************************************
-+* SPI_mac_clone
-+* port -> the port which will lock or unlock
-+* lock -> 0/the port will be unlock
-+*	  1/the port will be locked
-+**********************************************/
-+void SPI_mac_lock(unsigned int port, unsigned char lock)
-+{
-+	unsigned int i,value=0;
-+
-+	value = SPI_read(0,0x12);		// read original
-+
-+	for(i=0;i 0: if DA == pause then drop and stop mac learning
-+*	     1: if DA == pause ,then forward it
-+***************************************************/
-+void SPI_pause_cmd_forward(unsigned char forward)
-+{
-+	unsigned int value=0;
-+
-+	value = SPI_read(0,0x2C);		// read original setting
-+	if(forward)
-+		value |= 0x2000;		// set bit[13] '1'
-+	else
-+		value &= 0xDFFF;		// set bit[13] '0'
-+
-+	SPI_write(0x2C,value);
-+
-+}
-+
-+
-+/************************************************
-+* SPI_read
-+* table -> which table to be read: 1/count  0/EEPROM
-+* addr  -> Address to be read
-+* return : Value of the register
-+*************************************************/
-+unsigned int SPI_read(unsigned char table,unsigned char addr)
-+{
-+	int i ;
-+	unsigned int value=0;
-+	unsigned int bit;
-+#ifdef CONFIG_IT8712_GPIO
-+	unsigned char status;
-+#else
-+    unsigned int ad1;
-+#endif
-+
-+#ifdef CONFIG_IT8712_GPIO
-+	status = inb_gpio(LPC_GPIO_SET);
-+	status &= ~(ADM_EDIO) ;		//EDIO low
-+	outb_gpio(LPC_GPIO_SET, status);
-+#else
-+   	ad1 = (GPIO_BASE_ADDR + GPIO_DATA_CLEAR);
-+	writel(GPIO_MISO,ad1); /* set MISO to 0 */
-+#endif
-+
-+	SPI_CS_enable(0);
-+
-+	SPI_pre_st(); // PRE+ST
-+	SPI_write_bit(1); // OPCODE '10' for read
-+	SPI_write_bit(0);
-+
-+	(table==1) ? SPI_write_bit(1) : SPI_write_bit(0) ;	// table select
-+
-+	SPI_write_bit(0);		// Device Address
-+	SPI_write_bit(0);
-+
-+
-+	// send 7 bits address to be read
-+	for (i=6;i>=0;i--) {
-+		bit= ((addr>>i) & 0x01) ? 1 :0 ;
-+		SPI_write_bit(bit);
-+	}
-+
-+
-+	// turn around
-+	SPI_read_bit(); // TA_Z
-+
-+	value=0;
-+	for (i=31;i>=0;i--) { // READ DATA
-+		bit=SPI_read_bit();
-+		value |= bit << i ;
-+	}
-+
-+	SPI_read_bit(); // dumy clock
-+	SPI_read_bit(); // dumy clock
-+
-+	if(!table)					// EEPROM, only fetch 16 bits data
-+	{
-+	    if(addr&0x01)				// odd number content (register,register-1)
-+		    value >>= 16 ;			// so we remove the rear 16bits
-+	    else					// even number content (register+1,register),
-+		    value &= 0x0000FFFF ;		// so we keep the rear 16 bits
-+	}
-+
-+
-+	SPI_CS_enable(0);
-+
-+#ifdef CONFIG_IT8712_GPIO
-+	status = inb_gpio(LPC_GPIO_SET);
-+	status &= ~(ADM_EDIO) ;		//EDIO low
-+	outb_gpio(LPC_GPIO_SET, status);
-+#else
-+   	ad1 = (GPIO_BASE_ADDR + GPIO_DATA_CLEAR);
-+	writel(GPIO_MISO,ad1); /* set MISO to 0 */
-+#endif
-+
-+	return(value);
-+
-+}
-+
-+
-+
-+/**************************************************
-+* SPI_port_en
-+* port -> Number of port to config
-+* enable -> 1/ enable this port
-+*	    0/ disable this port
-+**************************************************/
-+void SPI_port_enable(unsigned int port,unsigned char enable)
-+{
-+	unsigned int reg_val ;
-+	unsigned char reg_add ;
-+
-+	if(port<=3)
-+		reg_add=2*port+1;
-+	else if(port==4) reg_add = 8 ;
-+	else reg_add = 9 ;
-+
-+	reg_val = SPI_read(0,reg_add);
-+	if(enable)
-+	{
-+		reg_val &= 0xFFDF ;
-+		SPI_write(reg_add,reg_val);
-+	}
-+	else
-+	{
-+		reg_val |= 0x0020 ;
-+		SPI_write(reg_add,reg_val);
-+	}
-+}
-+
-+/********************************************************
-+* get port status
-+* port -> specify the port number to get configuration
-+*********************************************************/
-+void SPI_get_status(unsigned int port)
-+{
-+/*	unsigned int reg_val,add_offset[6];
-+	struct PORT_STATUS *status;
-+	status = &port_state[port];
-+
-+	if(port>(ADM6996_PORT_NO-1))
-+		return ;
-+
-+	// Link estabilish , speed, deplex, flow control ?
-+	if(port < 5 )
-+	{
-+		reg_val = SPI_read(1, 1) ;
-+		if(port < 4)
-+			reg_val >>= port*8 ;
-+		else
-+			reg_val >>=28 ;
-+		status->link = reg_val & 0x00000001 ;
-+		status->speed = reg_val  & 0x00000002 ;
-+		status->duplex = reg_val & 0x00000004 ;
-+		status->flow_ctl = reg_val & 0x00000008 ;
-+	}
-+	else if(port ==5 )
-+	{
-+		reg_val = SPI_read(1, 2) ;
-+		status->link = reg_val & 0x00000001 ;
-+		status->speed = reg_val  & 0x00000002 ;
-+		status->duplex = reg_val & 0x00000008 ;
-+		status->flow_ctl = reg_val & 0x00000010 ;
-+	}
-+
-+	//   Mac Lock ?
-+	reg_val = SPI_read(0,0x12);
-+	switch(port)
-+	{
-+		case 0:	status->mac_lock = reg_val & 0x00000001;
-+		case 1:	status->mac_lock = reg_val & 0x00000004;
-+		case 2:	status->mac_lock = reg_val & 0x00000010;
-+		case 3:	status->mac_lock = reg_val & 0x00000040;
-+		case 4:	status->mac_lock = reg_val & 0x00000080;
-+		case 5:	status->mac_lock = reg_val & 0x00000100;
-+	}
-+
-+	// port enable ?
-+	add_offset[0] = 0x01 ;		add_offset[1] = 0x03 ;
-+	add_offset[2] = 0x05 ;		add_offset[3] = 0x07 ;
-+	add_offset[4] = 0x08 ;		add_offset[5] = 0x09 ;
-+	reg_val = SPI_read(0,add_offset[port]);
-+	status->port_disable = reg_val & 0x0020;
-+
-+
-+	//  Packet Count ...
-+	add_offset[0] = 0x04 ;		add_offset[1] = 0x06 ;
-+	add_offset[2] = 0x08 ;		add_offset[3] = 0x0a ;
-+	add_offset[4] = 0x0b ;		add_offset[5] = 0x0c ;
-+
-+	reg_val = SPI_read(1,add_offset[port]);
-+	status->rx_pac_count = reg_val ;
-+	reg_val = SPI_read(1,add_offset[port]+9);
-+	status->rx_pac_byte = reg_val ;
-+	reg_val = SPI_read(1,add_offset[port]+18);
-+	status->tx_pac_count = reg_val ;
-+	reg_val = SPI_read(1,add_offset[port]+27);
-+	status->tx_pac_byte = reg_val ;
-+	reg_val = SPI_read(1,add_offset[port]+36);
-+	status->collision_count = reg_val ;
-+	reg_val = SPI_read(1,add_offset[port]+45);
-+	status->error_count = reg_val ;
-+	reg_val = SPI_read(1, 0x3A);
-+	switch(port)
-+	{
-+		case 0:	status->rx_pac_count_overflow = reg_val & 0x00000001;
-+			status->rx_pac_byte_overflow = reg_val & 0x00000200 ;
-+		case 1:	status->rx_pac_count_overflow = reg_val & 0x00000004;
-+			status->rx_pac_byte_overflow = reg_val & 0x00000800 ;
-+		case 2:	status->rx_pac_count_overflow = reg_val & 0x00000010;
-+			status->rx_pac_byte_overflow = reg_val & 0x00002000 ;
-+		case 3:	status->rx_pac_count_overflow = reg_val & 0x00000040;;
-+			status->rx_pac_byte_overflow = reg_val & 0x00008000 ;
-+		case 4:	status->rx_pac_count_overflow = reg_val & 0x00000080;
-+			status->rx_pac_byte_overflow = reg_val & 0x00010000 ;
-+		case 5:	status->rx_pac_count_overflow = reg_val & 0x00000100;
-+			status->rx_pac_byte_overflow = reg_val & 0x00020000 ;
-+	}
-+
-+	reg_val = SPI_read(1, 0x3B);
-+	switch(port)
-+	{
-+		case 0:	status->tx_pac_count_overflow = reg_val & 0x00000001;
-+			status->tx_pac_byte_overflow  = reg_val & 0x00000200 ;
-+		case 1:	status->tx_pac_count_overflow  = reg_val & 0x00000004;
-+			status->tx_pac_byte_overflow  = reg_val & 0x00000800 ;
-+		case 2:	status->tx_pac_count_overflow  = reg_val & 0x00000010;
-+			status->tx_pac_byte_overflow  = reg_val & 0x00002000 ;
-+		case 3:	status->tx_pac_count_overflow  = reg_val & 0x00000040;;
-+			status->tx_pac_byte_overflow  = reg_val & 0x00008000 ;
-+		case 4:	status->tx_pac_count_overflow  = reg_val & 0x00000080;
-+			status->tx_pac_byte_overflow  = reg_val & 0x00010000 ;
-+		case 5:	status->tx_pac_count_overflow  = reg_val & 0x00000100;
-+			status->tx_pac_byte_overflow  = reg_val & 0x00020000 ;
-+	}
-+*/
-+
-+	unsigned int reg_val;
-+	struct PORT_STATUS *status;
-+	status = &port_state[port];
-+
-+	if(port>=ADM6999_PORT_NO)
-+		return ;
-+
-+	// Link estabilish , speed, deplex, flow control ?
-+	if(port < ADM6999_PORT_NO-1 )
-+	{
-+		reg_val = SPI_read(1, 0x01) ;
-+		reg_val = reg_val >> port*4 ;
-+		status->link = reg_val & 0x00000001 ;
-+		status->speed = reg_val  & 0x00000002 ;
-+		status->duplex = reg_val & 0x00000004 ;
-+		status->flow_ctl = reg_val & 0x00000008 ;
-+	}
-+	else if(port == (ADM6999_PORT_NO-1) )
-+	{
-+		reg_val = SPI_read(1, 0x02) ;
-+		status->link = reg_val & 0x00000001 ;
-+		status->speed = reg_val  & 0x00000002 ;
-+		status->duplex = reg_val & 0x00000008 ;
-+		status->flow_ctl = reg_val & 0x00000010 ;
-+	}
-+
-+	// Mac Lock ?
-+	reg_val = SPI_read(0,0x12);
-+	reg_val = reg_val >> port ;
-+	reg_val = reg_val & 0x01 ;
-+	status->mac_lock = reg_val ? 0x01:0x00 ;
-+
-+	// port enable ?
-+	reg_val = SPI_read(0,(unsigned char)port+1);
-+	status->port_disable = reg_val & 0x0020;
-+
-+	//  Packet Count ...
-+	reg_val = SPI_read(1,(unsigned char)port+0x04);
-+	status->rx_pac_count = reg_val ;
-+	reg_val = SPI_read(1,(unsigned char)port+0x0D);
-+	status->rx_pac_byte = reg_val ;
-+	reg_val = SPI_read(1,(unsigned char)port+0x16);
-+	status->tx_pac_count = reg_val ;
-+	reg_val = SPI_read(1,(unsigned char)port+0x1F);
-+	status->tx_pac_byte = reg_val ;
-+	reg_val = SPI_read(1,(unsigned char)port+0x28);
-+	status->collision_count = reg_val ;
-+	reg_val = SPI_read(1,(unsigned char)port+0x31);
-+	status->error_count = reg_val ;
-+	reg_val = SPI_read(1, 0x3A);
-+	reg_val = reg_val >> port ;
-+	status->rx_pac_count_overflow = reg_val & 0x00000001;
-+	reg_val = reg_val >> 0x09 ;
-+	status->rx_pac_byte_overflow = reg_val & 0x00000001 ;
-+
-+	reg_val = SPI_read(1, 0x3B);
-+	reg_val = reg_val >> port ;
-+	status->tx_pac_count_overflow = reg_val & 0x00000001;
-+	reg_val = reg_val >> 0x09 ;
-+	status->tx_pac_byte_overflow  = reg_val & 0x00000001 ;
-+
-+	reg_val = SPI_read(1, 0x3C);
-+	reg_val = reg_val >> port ;
-+	status->collision_count_overflow = reg_val & 0x00000001;
-+	reg_val = reg_val >> 0x09 ;
-+	status->error_count_overflow  = reg_val & 0x00000001 ;
-+
-+}
-+
-+unsigned int SPI_get_identifier(void)
-+{
-+	unsigned int flag=0;
-+
-+#ifdef CONFIG_IT8712_GPIO
-+
-+	if (!it8712_exist) {
-+		return -ENODEV;
-+	}
-+	printk("it8712_gpio init\n");
-+
-+	/* initialize registers */
-+	// switch all multi-function pins to GPIO
-+	LPCSetConfig(LDN_GPIO, 0x28, 0xff);
-+
-+	// set simple I/O base address
-+	LPCSetConfig(LDN_GPIO, 0x62, IT8712_GPIO_BASE >> 8);
-+	LPCSetConfig(LDN_GPIO, 0x63, (unsigned char) IT8712_GPIO_BASE >> 8);
-+
-+	// select GPIO to simple I/O
-+	LPCSetConfig(LDN_GPIO, 0xc3, 0xff);
-+
-+	// enable internal pull-up
-+	LPCSetConfig(LDN_GPIO, 0xbb, 0xff);
-+
-+#endif
-+
-+	flag = SPI_read(1,0x00);
-+	printk("Get ADM identifier %6x\n",flag);
-+	if ((flag & 0xFFFF0) == 0x21120) {
-+		printk("ADM699X Found\n");
-+		return 1;
-+	}
-+	else {
-+		printk("ADM699X not Found\n");
-+		return 0;
-+	}
-+}
-+
---- /dev/null
-+++ b/drivers/net/sl351x_crc16.c
-@@ -0,0 +1,93 @@
-+/****************************************************************************
-+* Name			: sl351x_crc16.c
-+* Description	:
-+*		Implement CRC16
-+*		refer to RFC1662
-+* History
-+*
-+*	Date		Writer		Description
-+*	-----------	-----------	-------------------------------------------------
-+*	09/14/2005	Gary Chen	Create
-+*
-+****************************************************************************/
-+
-+#define INITFCS16		0xffff  /* Initial FCS value */
-+#define GOODFCS16		0xf0b8  /* Good final FCS value */
-+#define SWAP_WORD(x)	(unsigned short)((((unsigned short)x & 0x00FF) << 8) |	\
-+										 (((unsigned short)x & 0xFF00) >> 8))
-+
-+/*----------------------------------------------------------------------
-+* 	x**0 + x**5 + x**12 + x**16
-+*----------------------------------------------------------------------*/
-+static const unsigned short crc16_tbl[256] = {
-+      0x0000, 0x1189, 0x2312, 0x329b, 0x4624, 0x57ad, 0x6536, 0x74bf,
-+      0x8c48, 0x9dc1, 0xaf5a, 0xbed3, 0xca6c, 0xdbe5, 0xe97e, 0xf8f7,
-+      0x1081, 0x0108, 0x3393, 0x221a, 0x56a5, 0x472c, 0x75b7, 0x643e,
-+      0x9cc9, 0x8d40, 0xbfdb, 0xae52, 0xdaed, 0xcb64, 0xf9ff, 0xe876,
-+      0x2102, 0x308b, 0x0210, 0x1399, 0x6726, 0x76af, 0x4434, 0x55bd,
-+      0xad4a, 0xbcc3, 0x8e58, 0x9fd1, 0xeb6e, 0xfae7, 0xc87c, 0xd9f5,
-+      0x3183, 0x200a, 0x1291, 0x0318, 0x77a7, 0x662e, 0x54b5, 0x453c,
-+      0xbdcb, 0xac42, 0x9ed9, 0x8f50, 0xfbef, 0xea66, 0xd8fd, 0xc974,
-+      0x4204, 0x538d, 0x6116, 0x709f, 0x0420, 0x15a9, 0x2732, 0x36bb,
-+      0xce4c, 0xdfc5, 0xed5e, 0xfcd7, 0x8868, 0x99e1, 0xab7a, 0xbaf3,
-+      0x5285, 0x430c, 0x7197, 0x601e, 0x14a1, 0x0528, 0x37b3, 0x263a,
-+      0xdecd, 0xcf44, 0xfddf, 0xec56, 0x98e9, 0x8960, 0xbbfb, 0xaa72,
-+      0x6306, 0x728f, 0x4014, 0x519d, 0x2522, 0x34ab, 0x0630, 0x17b9,
-+      0xef4e, 0xfec7, 0xcc5c, 0xddd5, 0xa96a, 0xb8e3, 0x8a78, 0x9bf1,
-+      0x7387, 0x620e, 0x5095, 0x411c, 0x35a3, 0x242a, 0x16b1, 0x0738,
-+      0xffcf, 0xee46, 0xdcdd, 0xcd54, 0xb9eb, 0xa862, 0x9af9, 0x8b70,
-+      0x8408, 0x9581, 0xa71a, 0xb693, 0xc22c, 0xd3a5, 0xe13e, 0xf0b7,
-+      0x0840, 0x19c9, 0x2b52, 0x3adb, 0x4e64, 0x5fed, 0x6d76, 0x7cff,
-+      0x9489, 0x8500, 0xb79b, 0xa612, 0xd2ad, 0xc324, 0xf1bf, 0xe036,
-+      0x18c1, 0x0948, 0x3bd3, 0x2a5a, 0x5ee5, 0x4f6c, 0x7df7, 0x6c7e,
-+      0xa50a, 0xb483, 0x8618, 0x9791, 0xe32e, 0xf2a7, 0xc03c, 0xd1b5,
-+      0x2942, 0x38cb, 0x0a50, 0x1bd9, 0x6f66, 0x7eef, 0x4c74, 0x5dfd,
-+      0xb58b, 0xa402, 0x9699, 0x8710, 0xf3af, 0xe226, 0xd0bd, 0xc134,
-+      0x39c3, 0x284a, 0x1ad1, 0x0b58, 0x7fe7, 0x6e6e, 0x5cf5, 0x4d7c,
-+      0xc60c, 0xd785, 0xe51e, 0xf497, 0x8028, 0x91a1, 0xa33a, 0xb2b3,
-+      0x4a44, 0x5bcd, 0x6956, 0x78df, 0x0c60, 0x1de9, 0x2f72, 0x3efb,
-+      0xd68d, 0xc704, 0xf59f, 0xe416, 0x90a9, 0x8120, 0xb3bb, 0xa232,
-+      0x5ac5, 0x4b4c, 0x79d7, 0x685e, 0x1ce1, 0x0d68, 0x3ff3, 0x2e7a,
-+      0xe70e, 0xf687, 0xc41c, 0xd595, 0xa12a, 0xb0a3, 0x8238, 0x93b1,
-+      0x6b46, 0x7acf, 0x4854, 0x59dd, 0x2d62, 0x3ceb, 0x0e70, 0x1ff9,
-+      0xf78f, 0xe606, 0xd49d, 0xc514, 0xb1ab, 0xa022, 0x92b9, 0x8330,
-+      0x7bc7, 0x6a4e, 0x58d5, 0x495c, 0x3de3, 0x2c6a, 0x1ef1, 0x0f78
-+};
-+
-+/*----------------------------------------------------------------------
-+* hash_crc16
-+*----------------------------------------------------------------------*/
-+unsigned short hash_crc16(unsigned short crc, unsigned char *datap, unsigned long len)
-+{
-+    while (len--)
-+    {
-+        crc = (crc >> 8) ^ crc16_tbl[(crc ^ (*datap++)) & 0xff];
-+    }
-+
-+    return (crc);
-+
-+}
-+
-+/*----------------------------------------------------------------------
-+* hash_check_crc16
-+*----------------------------------------------------------------------*/
-+unsigned long hash_check_crc16(unsigned char *datap, unsigned long len)
-+{
-+    unsigned short crc;
-+
-+    crc = hash_crc16(INITFCS16, datap, len );
-+    return (crc == GOODFCS16) ?  0 : 1;
-+}
-+
-+/*----------------------------------------------------------------------
-+* hash_gen_crc16
-+*----------------------------------------------------------------------*/
-+unsigned short hash_gen_crc16(unsigned char *datap, unsigned long len)
-+{
-+    unsigned short crc;
-+
-+    crc = hash_crc16(INITFCS16, datap, len);
-+    crc ^= 0xffff;
-+
-+    return(SWAP_WORD(crc));
-+}
---- /dev/null
-+++ b/drivers/net/sl351x_gmac.c
-@@ -0,0 +1,5622 @@
-+/**************************************************************************
-+* Copyright 2006 StorLink Semiconductors, Inc.  All rights reserved.
-+*--------------------------------------------------------------------------
-+* Name			: sl351x_gmac.c
-+* Description	:
-+*		Ethernet device driver for Storlink SL351x FPGA
-+*
-+* History
-+*
-+*	Date		Writer		Description
-+*	-----------	-----------	-------------------------------------------------
-+*	08/22/2005	Gary Chen	Create and implement
-+*   27/10/2005  CH Hsu      Porting to Linux
-+*
-+****************************************************************************/
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+
-+#include 
-+
-+#define	 MIDWAY
-+#define	 SL_LEPUS
-+#define VITESSE_G5SWITCH	1
-+
-+#ifndef CONFIG_SL351x_RXTOE
-+//#define CONFIG_SL351x_RXTOE	1
-+#endif
-+#undef CONFIG_SL351x_RXTOE
-+
-+#include 
-+#include 
-+#include 
-+#include 
-+
-+#ifdef CONFIG_SL351x_SYSCTL
-+#include 
-+#endif
-+
-+#ifdef CONFIG_SL351x_RXTOE
-+#include 
-+#include 
-+#include 
-+#include 
-+#endif
-+
-+// #define SL351x_TEST_WORKAROUND
-+#ifdef CONFIG_SL351x_NAT
-+#define CONFIG_SL_NAPI					1
-+#endif
-+#define GMAX_TX_INTR_DISABLED			1
-+#define DO_HW_CHKSUM					1
-+#define ENABLE_TSO						1
-+#define GMAC_USE_TXQ0					1
-+// #define NAT_WORKAROUND_BY_RESET_GMAC	1
-+// #define HW_RXBUF_BY_KMALLOC			1
-+//#define _DUMP_TX_TCP_CONTENT	1
-+#define	br_if_ioctl						1
-+#define GMAC_LEN_1_2_ISSUE				1
-+
-+#define GMAC_EXISTED_FLAG			0x5566abcd
-+#define CONFIG_MAC_NUM				GMAC_NUM
-+#define GMAC0_BASE					TOE_GMAC0_BASE
-+#define GMAC1_BASE					TOE_GMAC1_BASE
-+#define PAUSE_SET_HW_FREEQ			(TOE_HW_FREEQ_DESC_NUM / 2)
-+#define PAUSE_REL_HW_FREEQ			((TOE_HW_FREEQ_DESC_NUM / 2) + 10)
-+#define DEFAULT_RXQ_MAX_CNT			256
-+#ifdef	L2_jumbo_frame
-+#define TCPHDRLEN(tcp_hdr)  ((ntohs(*((__u16 *)tcp_hdr + 6)) >> 12) & 0x000F)
-+#endif
-+
-+/* define chip information */
-+#define DRV_NAME					"SL351x"
-+#define DRV_VERSION					"0.1.4"
-+#define SL351x_DRIVER_NAME  		DRV_NAME " Giga Ethernet driver " DRV_VERSION
-+
-+#define toe_gmac_enable_interrupt(irq)	enable_irq(irq)
-+#define toe_gmac_disable_interrupt(irq)	disable_irq(irq)
-+
-+#ifdef SL351x_GMAC_WORKAROUND
-+#define GMAC_SHORT_FRAME_THRESHOLD		10
-+static struct timer_list gmac_workround_timer_obj;
-+void sl351x_poll_gmac_hanged_status(u32 data);
-+#ifdef CONFIG_SL351x_NAT
-+//#define IxscriptMate_1518				1
-+	void sl351x_nat_workaround_init(void);
-+	#ifndef NAT_WORKAROUND_BY_RESET_GMAC
-+		static void sl351x_nat_workaround_handler(void);
-+	#endif
-+#endif
-+#endif
-+
-+#ifdef GMAC_LEN_1_2_ISSUE
-+	#define _DEBUG_PREFETCH_NUM	256
-+static	int	_debug_prefetch_cnt;
-+static	char _debug_prefetch_buf[_DEBUG_PREFETCH_NUM][4] __attribute__((aligned(4)));
-+#endif
-+/*************************************************************
-+ *         Global Variable
-+ *************************************************************/
-+static int	gmac_initialized = 0;
-+TOE_INFO_T toe_private_data;
-+//static int		do_again = 0;
-+spinlock_t gmac_fq_lock;
-+unsigned int FLAG_SWITCH;
-+
-+static unsigned int     	next_tick = 3 * HZ;
-+static unsigned char    	eth_mac[CONFIG_MAC_NUM][6]= {{0x00,0x11,0x11,0x87,0x87,0x87}, {0x00,0x22,0x22,0xab,0xab,0xab}};
-+
-+#undef CONFIG_SL351x_RXTOE
-+extern NAT_CFG_T nat_cfg;
-+
-+/************************************************/
-+/*                 function declare             */
-+/************************************************/
-+static int gmac_set_mac_address(struct net_device *dev, void *addr);
-+static unsigned int gmac_get_phy_vendor(int phy_addr);
-+static void gmac_set_phy_status(struct net_device *dev);
-+void gmac_get_phy_status(struct net_device *dev);
-+static int gmac_netdev_ioctl(struct net_device *dev, struct ifreq *rq, int cmd);
-+static void gmac_tx_timeout(struct net_device *dev);
-+static int gmac_phy_thread (void *data);
-+struct net_device_stats * gmac_get_stats(struct net_device *dev);
-+static int gmac_start_xmit(struct sk_buff *skb, struct net_device *dev);
-+static void gmac_set_rx_mode(struct net_device *dev);
-+static irqreturn_t toe_gmac_interrupt (int irq, void *dev_instance);
-+static void toe_gmac_handle_default_rxq(struct net_device *dev, GMAC_INFO_T *tp);
-+unsigned int mii_read(unsigned char phyad,unsigned char regad);
-+void mii_write(unsigned char phyad,unsigned char regad,unsigned int value);
-+void mac_init_drv(void);
-+
-+static void toe_init_free_queue(void);
-+static void toe_init_swtx_queue(void);
-+static void toe_init_default_queue(void);
-+#ifdef CONFIG_SL351x_RXTOE
-+static void toe_init_interrupt_queue(void);
-+#endif
-+static void toe_init_interrupt_config(void);
-+static void toe_gmac_sw_reset(void);
-+static int toe_gmac_init_chip(struct net_device *dev);
-+static void toe_gmac_enable_tx_rx(struct net_device* dev);
-+static void toe_gmac_disable_tx_rx(struct net_device *dev);
-+static void toe_gmac_hw_start(struct net_device *dev);
-+static void toe_gmac_hw_stop(struct net_device *dev);
-+static int toe_gmac_clear_counter(struct net_device *dev);
-+static void toe_init_gmac(struct net_device *dev);
-+static  void toe_gmac_tx_complete(GMAC_INFO_T *tp, unsigned int tx_qid, struct net_device *dev, int interrupt);
-+#ifdef CONFIG_SL_NAPI
-+static int gmac_rx_poll(struct net_device *dev, int *budget);
-+// static void toe_gmac_disable_rx(struct net_device *dev);
-+// static void toe_gmac_enable_rx(struct net_device *dev);
-+#endif
-+
-+u32 mac_read_dma_reg(int mac, unsigned int offset);
-+void mac_write_dma_reg(int mac, unsigned int offset, u32 data);
-+void mac_stop_txdma(struct net_device *dev);
-+void mac_get_sw_tx_weight(struct net_device *dev, char *weight);
-+void mac_set_sw_tx_weight(struct net_device *dev, char *weight);
-+void mac_get_hw_tx_weight(struct net_device *dev, char *weight);
-+void mac_set_hw_tx_weight(struct net_device *dev, char *weight);
-+static inline void toe_gmac_fill_free_q(void);
-+
-+#ifdef VITESSE_G5SWITCH
-+extern int Get_Set_port_status(void);
-+extern int SPI_default(void);
-+extern unsigned int SPI_get_identifier(void);
-+void gmac_get_switch_status(struct net_device *dev);
-+unsigned int Giga_switch=0;
-+unsigned int switch_port_no=0;
-+unsigned int ever_dwon=0;
-+#endif
-+
-+/************************************************/
-+/*            GMAC function declare             */
-+/************************************************/
-+static int gmac_open (struct net_device *dev);
-+static int gmac_close (struct net_device *dev);
-+static void gmac_cleanup_module(void);
-+static void gmac_get_mac_address(void);
-+
-+#ifdef CONFIG_SL351x_NAT
-+static void toe_init_hwtx_queue(void);
-+extern void sl351x_nat_init(void);
-+extern void sl351x_nat_input(struct sk_buff *skb, int port, void *l3off, void *l4off);
-+extern int sl351x_nat_output(struct sk_buff *skb, int port);
-+extern int sl351x_nat_ioctl(struct net_device *dev, struct ifreq *rq, int cmd);
-+#endif
-+
-+#ifdef CONFIG_SL351x_RXTOE
-+extern void set_toeq_hdr(struct toe_conn* connection, TOE_INFO_T* toe, struct net_device *dev);
-+extern void sl351x_toe_init(void);
-+extern void toe_gmac_handle_toeq(struct net_device *dev, GMAC_INFO_T* tp, __u32 status);
-+extern struct toe_conn* init_toeq(int ipver, void* iph, struct tcphdr* tcp_hdr, TOE_INFO_T* toe, unsigned char* l2hdr);
-+#endif
-+
-+int mac_set_rule_reg(int mac, int rule, int enabled, u32 reg0, u32 reg1, u32 reg2);
-+void mac_set_rule_enable_bit(int mac, int rule, int data);
-+int mac_set_rule_action(int mac, int rule, int data);
-+int mac_get_MRxCRx(int mac, int rule, int ctrlreg);
-+void mac_set_MRxCRx(int mac, int rule, int ctrlreg, u32 data);
-+
-+/*----------------------------------------------------------------------
-+*	Ethernet Driver init
-+*----------------------------------------------------------------------*/
-+
-+static int __init gmac_init_module(void)
-+{
-+	GMAC_INFO_T 		*tp;
-+	struct net_device	*dev;
-+	int 		i,j;
-+	unsigned int	chip_id;
-+//	unsigned int chip_version;
-+
-+#ifdef CONFIG_SL3516_ASIC
-+{
-+    unsigned int    val;
-+    /* set GMAC global register */
-+    val = readl(GMAC_GLOBAL_BASE_ADDR+0x10);
-+    val = val | 0x005f0000;
-+    writel(val,GMAC_GLOBAL_BASE_ADDR+0x10);
-+//    writel(0xb737b737,GMAC_GLOBAL_BASE_ADDR+0x1c); //For Socket Board
-+    writel(0x77777777,GMAC_GLOBAL_BASE_ADDR+0x20);
-+//    writel(0xa737b747,GMAC_GLOBAL_BASE_ADDR+0x1c);//For Mounting Board
-+
-+	//debug_Aaron
-+    //writel(0xa7f0a7f0,GMAC_GLOBAL_BASE_ADDR+0x1c);//For Mounting Board
-+    writel(0xa7f0b7f0,GMAC_GLOBAL_BASE_ADDR+0x1c);//For Mounting Board
-+
-+    writel(0x77777777,GMAC_GLOBAL_BASE_ADDR+0x24);
-+	writel(0x09200030,GMAC_GLOBAL_BASE_ADDR+0x2C);
-+	val = readl(GMAC_GLOBAL_BASE_ADDR+0x04);
-+	if((val&(1<<20))==0){           // GMAC1 enable
-+ 		val = readl(GMAC_GLOBAL_BASE_ADDR+0x30);
-+		val = (val & 0xe7ffffff) | 0x08000000;
-+		writel(val,GMAC_GLOBAL_BASE_ADDR+0x30);
-+	}
-+}
-+#endif
-+
-+#ifdef VITESSE_G5SWITCH
-+	Giga_switch = SPI_get_identifier();
-+	if(Giga_switch)
-+		switch_port_no = SPI_default();
-+#endif
-+
-+	chip_id = readl(GMAC_GLOBAL_BASE_ADDR+0x0);
-+	if (chip_id == 0x3512C1)
-+	{
-+		writel(0x5787a5f0,GMAC_GLOBAL_BASE_ADDR+0x1c);//For 3512 Switch Board
-+		writel(0x55557777,GMAC_GLOBAL_BASE_ADDR+0x20);//For 3512 Switch Board
-+	}
-+//#endif
-+
-+	mac_init_drv();
-+
-+	printk (KERN_INFO SL351x_DRIVER_NAME " built at %s %s\n", __DATE__, __TIME__);
-+
-+//	init_waitqueue_entry(&wait, current);
-+
-+	// printk("GMAC Init......\n");
-+
-+	i = 0;
-+	for(j = 0; idev = NULL;
-+		if (tp->existed != GMAC_EXISTED_FLAG) continue;
-+
-+		dev = alloc_etherdev(0);
-+		if (dev == NULL)
-+		{
-+			printk (KERN_ERR "Can't allocate ethernet device #%d .\n",i);
-+			return -ENOMEM;
-+		}
-+
-+		dev->priv=tp;
-+		tp->dev = dev;
-+
-+		SET_MODULE_OWNER(dev);
-+
-+		// spin_lock_init(&tp->lock);
-+		spin_lock_init(&gmac_fq_lock);
-+		dev->base_addr = tp->base_addr;
-+		dev->irq = tp->irq;
-+	    dev->open = gmac_open;
-+	    dev->stop = gmac_close;
-+		dev->hard_start_xmit = gmac_start_xmit;
-+		dev->get_stats = gmac_get_stats;
-+		dev->set_multicast_list = gmac_set_rx_mode;
-+		dev->set_mac_address = gmac_set_mac_address;
-+		dev->do_ioctl = gmac_netdev_ioctl;
-+		dev->tx_timeout = gmac_tx_timeout;
-+		dev->watchdog_timeo = GMAC_DEV_TX_TIMEOUT;
-+#ifdef	L2_jumbo_frame
-+		dev->mtu = 2018; //2002  ,2018
-+#endif
-+		if (tp->port_id == 0)
-+			dev->tx_queue_len = TOE_GMAC0_SWTXQ_DESC_NUM;
-+		else
-+			dev->tx_queue_len = TOE_GMAC1_SWTXQ_DESC_NUM;
-+
-+#ifdef DO_HW_CHKSUM
-+		dev->features |= NETIF_F_SG|NETIF_F_HW_CSUM;
-+#ifdef ENABLE_TSO
-+		dev->features |= NETIF_F_TSO;
-+#endif
-+#endif
-+#ifdef CONFIG_SL_NAPI
-+        dev->poll = gmac_rx_poll;
-+        dev->weight = 64;
-+#endif
-+
-+		if (register_netdev(dev))
-+		{
-+			gmac_cleanup_module();
-+			return(-1);
-+		}
-+	}
-+
-+
-+//	FLAG_SWITCH = 0 ;
-+//	FLAG_SWITCH = SPI_get_identifier();
-+//	if(FLAG_SWITCH)
-+//	{
-+//		printk("Configure ADM699X...\n");
-+//		SPI_default();	//Add by jason for ADM699X configuration
-+//	}
-+	return (0);
-+}
-+
-+/*----------------------------------------------------------------------
-+*	gmac_cleanup_module
-+*----------------------------------------------------------------------*/
-+
-+static void gmac_cleanup_module(void)
-+{
-+    int i;
-+
-+#ifdef SL351x_GMAC_WORKAROUND
-+	del_timer(&gmac_workround_timer_obj);
-+#endif
-+
-+    for (i=0;igmac[0].base_addr = GMAC0_BASE;
-+		toe->gmac[1].base_addr = GMAC1_BASE;
-+		toe->gmac[0].dma_base_addr = TOE_GMAC0_DMA_BASE;
-+		toe->gmac[1].dma_base_addr = TOE_GMAC1_DMA_BASE;
-+        toe->gmac[0].auto_nego_cfg = 1;
-+        toe->gmac[1].auto_nego_cfg = 1;
-+#ifdef CONFIG_SL3516_ASIC
-+        toe->gmac[0].speed_cfg = GMAC_SPEED_1000;
-+        toe->gmac[1].speed_cfg = GMAC_SPEED_1000;
-+#else
-+		toe->gmac[0].speed_cfg = GMAC_SPEED_100;
-+        toe->gmac[1].speed_cfg = GMAC_SPEED_100;
-+#endif
-+        toe->gmac[0].full_duplex_cfg = 1;
-+        toe->gmac[1].full_duplex_cfg = 1;
-+#ifdef CONFIG_SL3516_ASIC
-+        toe->gmac[0].phy_mode = GMAC_PHY_RGMII_1000;
-+        toe->gmac[1].phy_mode = GMAC_PHY_RGMII_1000;
-+#else
-+		toe->gmac[0].phy_mode = GMAC_PHY_RGMII_100;
-+        toe->gmac[1].phy_mode = GMAC_PHY_RGMII_100;
-+#endif
-+        toe->gmac[0].port_id = GMAC_PORT0;
-+        toe->gmac[1].port_id = GMAC_PORT1;
-+        toe->gmac[0].phy_addr = 0x1;
-+        toe->gmac[1].phy_addr = 2;
-+//      toe->gmac[0].irq = SL2312_INTERRUPT_GMAC0;
-+		toe->gmac[0].irq =1;
-+//      toe->gmac[1].irq = SL2312_INTERRUPT_GMAC1;
-+		toe->gmac[1].irq =2;
-+        toe->gmac[0].mac_addr1 = ð_mac[0][0];
-+        toe->gmac[1].mac_addr1 = ð_mac[1][0];
-+
-+		for (i=0; igmac[i].base_addr, GMAC_STA_ADD2, 0x55aa55aa, 0xffffffff);
-+			data = gmac_read_reg(toe->gmac[i].base_addr, GMAC_STA_ADD2);
-+			if (data == 0x55aa55aa)
-+			{
-+#ifdef VITESSE_G5SWITCH
-+				if(Giga_switch && (i==1)){
-+					toe->gmac[i].existed = GMAC_EXISTED_FLAG;
-+					break;
-+				}
-+#endif
-+				phy_vendor = gmac_get_phy_vendor(toe->gmac[i].phy_addr);
-+				if (phy_vendor != 0 && phy_vendor != 0xffffffff)
-+					toe->gmac[i].existed = GMAC_EXISTED_FLAG;
-+			}
-+		}
-+
-+		// Write GLOBAL_QUEUE_THRESHOLD_REG
-+		threshold.bits32 = 0;
-+		threshold.bits.swfq_empty = (TOE_SW_FREEQ_DESC_NUM > 256) ? 255 :
-+		                                        TOE_SW_FREEQ_DESC_NUM/2;
-+		threshold.bits.hwfq_empty = (TOE_HW_FREEQ_DESC_NUM > 256) ? 256/4 :
-+		                                        TOE_HW_FREEQ_DESC_NUM/4;
-+		threshold.bits.toe_class = (TOE_TOE_DESC_NUM > 256) ? 256/4 :
-+		                                        TOE_TOE_DESC_NUM/4;
-+		threshold.bits.intrq = (TOE_INTR_DESC_NUM > 256) ? 256/4 :
-+		                                        TOE_INTR_DESC_NUM/4;
-+		writel(threshold.bits32, TOE_GLOBAL_BASE + GLOBAL_QUEUE_THRESHOLD_REG);
-+
-+		FLAG_SWITCH = 0;
-+		toe_gmac_sw_reset();
-+		toe_init_free_queue();
-+		toe_init_swtx_queue();
-+#ifdef CONFIG_SL351x_NAT
-+		toe_init_hwtx_queue();
-+#endif
-+		toe_init_default_queue();
-+#ifdef CONFIG_SL351x_RXTOE
-+		toe_init_interrupt_queue();
-+#endif
-+		toe_init_interrupt_config();
-+
-+#if defined(CONFIG_SL351x_NAT) || defined(CONFIG_SL351x_RXTOE)
-+		sl351x_hash_init();
-+#else
-+	{
-+		volatile u32 *dp1, *dp2, dword;
-+
-+		dp1 = (volatile u32 *) TOE_V_BIT_BASE;
-+		dp2 = (volatile u32 *) TOE_A_BIT_BASE;
-+
-+		for (i=0; isw_freeq_desc_base_dma) ;
-+	sw_desc_ptr = (GMAC_RXDESC_T *)desc_buf;
-+	if (!desc_buf)
-+	{
-+		printk("%s::DMA_MALLOC fail !\n",__func__);
-+		return;
-+	}
-+	memset((void *)desc_buf, 0, TOE_SW_FREEQ_DESC_NUM * sizeof(GMAC_RXDESC_T));
-+
-+	// DMA Queue Base & Size
-+	writel((toe->sw_freeq_desc_base_dma & DMA_Q_BASE_MASK) | TOE_SW_FREEQ_DESC_POWER,
-+			TOE_GLOBAL_BASE + GLOBAL_SW_FREEQ_BASE_SIZE_REG);
-+
-+	// init descriptor base
-+	toe->swfq_desc_base = desc_buf;
-+
-+	// SW Free Queue Read/Write Pointer
-+	rwptr_reg.bits.wptr = TOE_SW_FREEQ_DESC_NUM - 1;
-+	rwptr_reg.bits.rptr = 0;
-+	toe->fq_rx_rwptr.bits32 = rwptr_reg.bits32;
-+	writel(rwptr_reg.bits32, TOE_GLOBAL_BASE + GLOBAL_SWFQ_RWPTR_REG);
-+
-+	// SW Free Queue Descriptors
-+	for (i=0; iword0.bits.buffer_size = SW_RX_BUF_SIZE;
-+		sw_desc_ptr->word1.bits.sw_id = i;	// used to locate skb
-+		if ( (skb = dev_alloc_skb(SW_RX_BUF_SIZE))==NULL)  /* allocate socket buffer */
-+		{
-+			printk("%s::skb buffer allocation fail !\n",__func__); while(1);
-+		}
-+		REG32(skb->data) = (unsigned int)skb;
-+		skb_reserve(skb, SKB_RESERVE_BYTES);
-+		// toe->rx_skb[i] = skb;
-+		sw_desc_ptr->word2.buf_adr = (unsigned int)__pa(skb->data);
-+//   		consistent_sync((unsigned int)desc_ptr, sizeof(GMAC_RXDESC_T), PCI_DMA_TODEVICE);
-+   		sw_desc_ptr++;
-+	}
-+
-+#ifdef CONFIG_SL351x_NAT
-+	if (sizeof(skb->cb) < 64)
-+	{
-+			printk("==> %s:: sk structure is incorrect -->Change to cb[64] !\n",__func__); while(1);
-+	}
-+	// init hardware free queues
-+	desc_buf = (unsigned int)DMA_MALLOC((TOE_HW_FREEQ_DESC_NUM * sizeof(GMAC_RXDESC_T)),
-+						(dma_addr_t *)&toe->hw_freeq_desc_base_dma) ;
-+	desc_ptr = (GMAC_RXDESC_T *)desc_buf;
-+	if (!desc_buf)
-+	{
-+		printk("%s::DMA_MALLOC fail !\n",__func__);
-+		return;
-+	}
-+	memset((void *)desc_buf, 0, TOE_HW_FREEQ_DESC_NUM * sizeof(GMAC_RXDESC_T));
-+
-+	// DMA Queue Base & Size
-+	writel((toe->hw_freeq_desc_base_dma & DMA_Q_BASE_MASK) | TOE_HW_FREEQ_DESC_POWER,
-+			TOE_GLOBAL_BASE + GLOBAL_HW_FREEQ_BASE_SIZE_REG);
-+
-+	// init descriptor base
-+	toe->hwfq_desc_base = desc_buf;
-+
-+	// HW Free Queue Read/Write Pointer
-+	rwptr_reg.bits.wptr = TOE_HW_FREEQ_DESC_NUM - 1;
-+	rwptr_reg.bits.rptr = 0;
-+	writel(rwptr_reg.bits32, TOE_GLOBAL_BASE + GLOBAL_HWFQ_RWPTR_REG);
-+#ifndef HW_RXBUF_BY_KMALLOC
-+	buf_ptr = (unsigned int)DMA_MALLOC(TOE_HW_FREEQ_DESC_NUM * HW_RX_BUF_SIZE,
-+						(dma_addr_t *)&toe->hwfq_buf_base_dma);
-+#else
-+	buf_ptr = (unsigned int)kmalloc(TOE_HW_FREEQ_DESC_NUM * HW_RX_BUF_SIZE, GFP_KERNEL);
-+	toe->hwfq_buf_base_dma = __pa(buf_ptr);
-+#endif
-+	if (!buf_ptr)
-+	{
-+		printk("===> %s::Failed to allocate HW TxQ Buffers!\n",__func__);
-+		while(1);	// could not be happened, if happened, adjust the buffer descriptor number
-+		return;
-+	}
-+
-+	toe->hwfq_buf_base = buf_ptr;
-+	toe->hwfq_buf_end_dma = toe->hwfq_buf_base_dma + (TOE_HW_FREEQ_DESC_NUM * HW_RX_BUF_SIZE);
-+	buf_ptr = (unsigned int)toe->hwfq_buf_base_dma;
-+	for (i=0; iword0.bits.buffer_size = HW_RX_BUF_SIZE;
-+		desc_ptr->word1.bits.sw_id = i;
-+		desc_ptr->word2.buf_adr = (unsigned int)buf_ptr;
-+//   		consistent_sync((unsigned int)desc_ptr, sizeof(GMAC_RXDESC_T), PCI_DMA_TODEVICE);
-+   		// consistent_sync((unsigned int)buf_ptr, HW_RX_BUF_SIZE, PCI_DMA_TODEVICE);
-+   		desc_ptr++;
-+   		buf_ptr += HW_RX_BUF_SIZE;
-+	}
-+#else
-+	// DMA Queue Base & Size
-+	writel((0) | TOE_SW_FREEQ_DESC_POWER,
-+			TOE_GLOBAL_BASE + GLOBAL_HW_FREEQ_BASE_SIZE_REG);
-+	rwptr_reg.bits.wptr = TOE_HW_FREEQ_DESC_NUM - 1;
-+	rwptr_reg.bits.rptr = 0;
-+	writel(rwptr_reg.bits32, TOE_GLOBAL_BASE + GLOBAL_HWFQ_RWPTR_REG);
-+
-+#endif
-+}
-+/*----------------------------------------------------------------------
-+*	toe_init_swtx_queue
-+*	(2) Initialize the GMAC 0/1 SW TXQ Queue Descriptor Base Address & sizeup
-+*		GMAC_SW_TX_QUEUE_BASE_REG(0x0050)
-+*	(2) Initialize DMA Read/Write pointer for
-+*		GMAC 0/1 SW TX Q0-5
-+*----------------------------------------------------------------------*/
-+static void toe_init_swtx_queue(void)
-+{
-+	int 				i;
-+	TOE_INFO_T			*toe;
-+	DMA_RWPTR_T			rwptr_reg;
-+	unsigned int 		rwptr_addr;
-+	unsigned int		desc_buf;
-+
-+
-+	toe = (TOE_INFO_T *)&toe_private_data;
-+
-+	// GMAC-0, SW-TXQ
-+	// The GMAC-0 and GMAC-0 maybe have different descriptor number
-+	// so, not use for instruction
-+	desc_buf = (unsigned int)DMA_MALLOC((TOE_GMAC0_SWTXQ_DESC_NUM * TOE_SW_TXQ_NUM * sizeof(GMAC_TXDESC_T)),
-+						(dma_addr_t *)&toe->gmac[0].swtxq_desc_base_dma) ;
-+	toe->gmac[0].swtxq_desc_base = desc_buf;
-+	if (!desc_buf)
-+	{
-+		printk("%s::DMA_MALLOC fail !\n",__func__);
-+		return	;
-+	}
-+	memset((void *)desc_buf, 0,	TOE_GMAC0_SWTXQ_DESC_NUM * TOE_SW_TXQ_NUM * sizeof(GMAC_TXDESC_T));
-+	writel((toe->gmac[0].swtxq_desc_base_dma & DMA_Q_BASE_MASK) | TOE_GMAC0_SWTXQ_DESC_POWER,
-+			TOE_GMAC0_DMA_BASE+ GMAC_SW_TX_QUEUE_BASE_REG);
-+
-+	// GMAC0 SW TX Q0-Q5
-+	rwptr_reg.bits.wptr = 0;
-+	rwptr_reg.bits.rptr = 0;
-+	rwptr_addr = TOE_GMAC0_DMA_BASE + GMAC_SW_TX_QUEUE0_PTR_REG;
-+	for (i=0; igmac[0].swtxq[i].rwptr_reg = rwptr_addr;
-+		toe->gmac[0].swtxq[i].desc_base = desc_buf;
-+		toe->gmac[0].swtxq[i].total_desc_num = TOE_GMAC0_SWTXQ_DESC_NUM;
-+		desc_buf += TOE_GMAC0_SWTXQ_DESC_NUM * sizeof(GMAC_TXDESC_T);
-+		writel(rwptr_reg.bits32, rwptr_addr);
-+		rwptr_addr+=4;
-+	}
-+
-+	// GMAC-1, SW-TXQ
-+	desc_buf = (unsigned int)DMA_MALLOC((TOE_GMAC1_SWTXQ_DESC_NUM * TOE_SW_TXQ_NUM * sizeof(GMAC_TXDESC_T)),
-+						(dma_addr_t *)&toe->gmac[1].swtxq_desc_base_dma) ;
-+	toe->gmac[1].swtxq_desc_base = desc_buf;
-+	if (!desc_buf)
-+	{
-+		printk("%s::DMA_MALLOC fail !\n",__func__);
-+		return	;
-+	}
-+	memset((void *)desc_buf, 0,	TOE_GMAC1_SWTXQ_DESC_NUM * TOE_SW_TXQ_NUM * sizeof(GMAC_TXDESC_T));
-+	writel((toe->gmac[1].swtxq_desc_base_dma & DMA_Q_BASE_MASK) | TOE_GMAC1_SWTXQ_DESC_POWER,
-+			TOE_GMAC1_DMA_BASE+ GMAC_SW_TX_QUEUE_BASE_REG);
-+
-+
-+	// GMAC1 SW TX Q0-Q5
-+	rwptr_reg.bits.wptr = 0;
-+	rwptr_reg.bits.rptr = 0;
-+	rwptr_addr = TOE_GMAC1_DMA_BASE + GMAC_SW_TX_QUEUE0_PTR_REG;
-+	for (i=0; igmac[1].swtxq[i].rwptr_reg = rwptr_addr;
-+		toe->gmac[1].swtxq[i].desc_base = desc_buf;
-+		toe->gmac[1].swtxq[i].total_desc_num = TOE_GMAC1_SWTXQ_DESC_NUM;
-+		desc_buf += TOE_GMAC1_SWTXQ_DESC_NUM * sizeof(GMAC_TXDESC_T);
-+		writel(rwptr_reg.bits32, rwptr_addr);
-+		rwptr_addr+=4;
-+	}
-+}
-+
-+/*----------------------------------------------------------------------
-+*	toe_init_hwtx_queue
-+*	(2) Initialize the GMAC 0/1 HW TXQ Queue Descriptor Base Address & size
-+*		GMAC_HW_TX_QUEUE_BASE_REG(0x0054)
-+*	(2) Initialize DMA Read/Write pointer for
-+*		GMAC 0/1 HW TX Q0-5
-+*----------------------------------------------------------------------*/
-+#ifdef CONFIG_SL351x_NAT
-+static void toe_init_hwtx_queue(void)
-+{
-+	int 				i;
-+	TOE_INFO_T			*toe;
-+	DMA_RWPTR_T			rwptr_reg;
-+	unsigned int 		rwptr_addr;
-+	unsigned int		desc_buf;
-+
-+	toe = (TOE_INFO_T *)&toe_private_data;
-+	// GMAC-0, HW-TXQ
-+	// The GMAC-0 and GMAC-0 maybe have different descriptor number
-+	// so, not use for instruction
-+	desc_buf = (unsigned int)DMA_MALLOC((TOE_GMAC0_HWTXQ_DESC_NUM * TOE_HW_TXQ_NUM * sizeof(GMAC_TXDESC_T)),
-+						(dma_addr_t *)&toe->gmac[0].hwtxq_desc_base_dma) ;
-+	toe->gmac[0].hwtxq_desc_base = desc_buf;
-+	if (!desc_buf)
-+	{
-+		printk("%s::DMA_MALLOC fail !\n",__func__);
-+		return	;
-+	}
-+	memset((void *)desc_buf, 0,	TOE_GMAC0_HWTXQ_DESC_NUM * TOE_HW_TXQ_NUM * sizeof(GMAC_TXDESC_T));
-+	writel((toe->gmac[0].hwtxq_desc_base_dma & DMA_Q_BASE_MASK) | TOE_GMAC0_HWTXQ_DESC_POWER,
-+			TOE_GMAC0_DMA_BASE+ GMAC_HW_TX_QUEUE_BASE_REG);
-+
-+	// GMAC0 HW TX Q0-Q5
-+	rwptr_reg.bits.wptr = 0;
-+	rwptr_reg.bits.rptr = 0;
-+	rwptr_addr = TOE_GMAC0_DMA_BASE + GMAC_HW_TX_QUEUE0_PTR_REG;
-+	for (i=0; igmac[0].hwtxq[i].desc_base = desc_buf;
-+		desc_buf += TOE_GMAC0_HWTXQ_DESC_NUM * sizeof(GMAC_TXDESC_T);
-+		writel(rwptr_reg.bits32, rwptr_addr);
-+		rwptr_addr+=4;
-+	}
-+
-+	// GMAC-1, HW-TXQ
-+	desc_buf = (unsigned int)DMA_MALLOC((TOE_GMAC1_HWTXQ_DESC_NUM * TOE_HW_TXQ_NUM * sizeof(GMAC_TXDESC_T)),
-+						(dma_addr_t *)&toe->gmac[1].hwtxq_desc_base_dma) ;
-+	toe->gmac[1].hwtxq_desc_base = desc_buf;
-+	if (!desc_buf)
-+	{
-+		printk("%s::DMA_MALLOC fail !\n",__func__);
-+		return	;
-+	}
-+	memset((void *)desc_buf, 0,	TOE_GMAC1_HWTXQ_DESC_NUM * TOE_HW_TXQ_NUM * sizeof(GMAC_TXDESC_T));
-+	writel((toe->gmac[1].hwtxq_desc_base_dma & DMA_Q_BASE_MASK) | TOE_GMAC1_HWTXQ_DESC_POWER,
-+			TOE_GMAC1_DMA_BASE+ GMAC_HW_TX_QUEUE_BASE_REG);
-+
-+	// GMAC1 HW TX Q0-Q5
-+	rwptr_reg.bits.wptr = 0;
-+	rwptr_reg.bits.rptr = 0;
-+	rwptr_addr = TOE_GMAC1_DMA_BASE + GMAC_HW_TX_QUEUE0_PTR_REG;
-+	for (i=0; igmac[1].hwtxq[i].desc_base = desc_buf;
-+		desc_buf += TOE_GMAC1_HWTXQ_DESC_NUM * sizeof(GMAC_TXDESC_T);
-+		writel(rwptr_reg.bits32, rwptr_addr);
-+		rwptr_addr+=4;
-+	}
-+}
-+#endif
-+
-+/*----------------------------------------------------------------------
-+*	toe_init_default_queue
-+*	(1) Initialize the default 0/1 Queue Header
-+*		Register: TOE_DEFAULT_Q0_HDR_BASE (0x60002000)
-+*				  TOE_DEFAULT_Q1_HDR_BASE (0x60002008)
-+*	(2)	Initialize Descriptors of Default Queue 0/1
-+*----------------------------------------------------------------------*/
-+static void toe_init_default_queue(void)
-+{
-+	TOE_INFO_T				*toe;
-+	volatile NONTOE_QHDR_T	*qhdr;
-+	GMAC_RXDESC_T			*desc_ptr;
-+	DMA_SKB_SIZE_T			skb_size;
-+
-+	toe = (TOE_INFO_T *)&toe_private_data;
-+	desc_ptr = (GMAC_RXDESC_T *)DMA_MALLOC((TOE_DEFAULT_Q0_DESC_NUM * sizeof(GMAC_RXDESC_T)),
-+											(dma_addr_t *)&toe->gmac[0].default_desc_base_dma);
-+	if (!desc_ptr)
-+	{
-+		printk("%s::DMA_MALLOC fail !\n",__func__);
-+		return	;
-+	}
-+	memset((void *)desc_ptr, 0, TOE_DEFAULT_Q0_DESC_NUM * sizeof(GMAC_RXDESC_T));
-+	toe->gmac[0].default_desc_base = (unsigned int)desc_ptr;
-+	toe->gmac[0].default_desc_num = TOE_DEFAULT_Q0_DESC_NUM;
-+	qhdr = (volatile NONTOE_QHDR_T *)TOE_DEFAULT_Q0_HDR_BASE;
-+	qhdr->word0.base_size = ((unsigned int)toe->gmac[0].default_desc_base_dma & NONTOE_QHDR0_BASE_MASK) | TOE_DEFAULT_Q0_DESC_POWER;
-+	qhdr->word1.bits32 = 0;
-+	toe->gmac[0].rx_rwptr.bits32 = 0;
-+	toe->gmac[0].default_qhdr = (NONTOE_QHDR_T *)qhdr;
-+	desc_ptr = (GMAC_RXDESC_T *)DMA_MALLOC((TOE_DEFAULT_Q1_DESC_NUM * sizeof(GMAC_RXDESC_T)),
-+											(dma_addr_t *)&toe->gmac[1].default_desc_base_dma);
-+	if (!desc_ptr)
-+	{
-+		printk("%s::DMA_MALLOC fail !\n",__func__);
-+		return	;
-+	}
-+	memset((void *)desc_ptr, 0, TOE_DEFAULT_Q1_DESC_NUM * sizeof(GMAC_RXDESC_T));
-+	toe->gmac[1].default_desc_base = (unsigned int)desc_ptr;
-+	toe->gmac[1].default_desc_num = TOE_DEFAULT_Q1_DESC_NUM;
-+	qhdr = (volatile NONTOE_QHDR_T *)TOE_DEFAULT_Q1_HDR_BASE;
-+	qhdr->word0.base_size = ((unsigned int)toe->gmac[1].default_desc_base_dma & NONTOE_QHDR0_BASE_MASK) | TOE_DEFAULT_Q1_DESC_POWER;
-+	qhdr->word1.bits32 = 0;
-+	toe->gmac[1].rx_rwptr.bits32 = 0;
-+	toe->gmac[1].default_qhdr = (NONTOE_QHDR_T *)qhdr;
-+
-+	skb_size.bits.hw_skb_size = HW_RX_BUF_SIZE;
-+	skb_size.bits.sw_skb_size = SW_RX_BUF_SIZE;
-+	writel(skb_size.bits32, TOE_GLOBAL_BASE + GLOBAL_DMA_SKB_SIZE_REG);
-+}
-+
-+/*----------------------------------------------------------------------
-+*	toe_init_interrupt_queue
-+*	(1) Initialize the Interrupt Queue Header
-+*		Register: TOE_INTR_Q_HDR_BASE (0x60002080)
-+*	(2)	Initialize Descriptors of Interrupt Queues
-+*----------------------------------------------------------------------*/
-+#ifdef CONFIG_SL351x_RXTOE
-+static void toe_init_interrupt_queue(void)
-+{
-+	TOE_INFO_T				*toe;
-+	volatile NONTOE_QHDR_T	*qhdr;
-+	INTR_QHDR_T				*desc_ptr;
-+	// unsigned int			desc_buf_addr;
-+	int						i;
-+
-+	toe = (TOE_INFO_T *)&toe_private_data;
-+	desc_ptr = (INTR_QHDR_T *)DMA_MALLOC((TOE_INTR_QUEUE_NUM * TOE_INTR_DESC_NUM * sizeof(INTR_QHDR_T)),
-+											(dma_addr_t *)&toe->intr_desc_base_dma);
-+	if (!desc_ptr)
-+	{
-+		printk("%s::DMA_MALLOC interrupt queue fail !\n",__func__);
-+		return	;
-+	}
-+	/*
-+	desc_buf_addr = (unsigned int)DMA_MALLOC((TOE_INTR_DESC_NUM * sizeof(TOE_QHDR_T)),
-+												(dma_addr_t *)&toe->intr_buf_base_dma);
-+	if (!desc_buf_addr)
-+	{
-+		printk("%s::DMA_MALLOC interrupt desc fail !\n",__func__);
-+		return	;
-+	}*/
-+	printk("#### %s::Intr Q desc %x\n", __func__, (u32)desc_ptr);
-+
-+	memset((void *)desc_ptr, 0, TOE_INTR_QUEUE_NUM * TOE_INTR_DESC_NUM * sizeof(INTR_QHDR_T));
-+//	memset((void *)desc_buf_addr, 0, TOE_INTR_DESC_NUM * sizeof(TOE_QHDR_T));
-+	toe->intr_desc_base = (unsigned int)desc_ptr;
-+	toe->intr_desc_num = TOE_INTR_DESC_NUM;
-+
-+	qhdr = (volatile NONTOE_QHDR_T *)TOE_INTR_Q_HDR_BASE;
-+//	intrq = (INTRQ_INFO_T*) &toe->intrq[0];
-+	for (i=0; iword0.base_size = ((unsigned int)toe->intr_desc_base_dma & NONTOE_QHDR0_BASE_MASK) | TOE_INTR_DESC_POWER;
-+		qhdr->word1.bits32 = 0;
-+		desc_ptr += TOE_INTR_DESC_NUM;
-+	}
-+}
-+
-+#endif
-+
-+/*----------------------------------------------------------------------
-+*	toe_init_interrupt_config
-+*	Interrupt Select Registers are used to map interrupt to int0 or int1
-+*	Int0 and int1 are wired to CPU 0/1 GMAC 0/1
-+* 	Interrupt Device Inteface data are used to pass device info to
-+*		upper device deiver or store status/statistics
-+*	ISR handler
-+*		(1) If status bit ON but masked, the prinf error message (bug issue)
-+*		(2) If select bits are for me, handle it, else skip to let
-+*			the other ISR handles it.
-+*  Notes:
-+*		GMACx init routine (for eCOS) or open routine (for Linux)
-+*       enable the interrupt bits only which are selected for him.
-+*
-+*	Default Setting:
-+*		GMAC0 intr bits ------>	int0 ----> eth0
-+*		GMAC1 intr bits ------> int1 ----> eth1
-+*		TOE intr -------------> int0 ----> eth0
-+*		Classification Intr --> int0 ----> eth0
-+*		Default Q0 -----------> int0 ----> eth0
-+*		Default Q1 -----------> int1 ----> eth1
-+*----------------------------------------------------------------------*/
-+static void toe_init_interrupt_config(void)
-+{
-+	// clear all status bits
-+	writel(0xffffffff, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_STATUS_0_REG);
-+	writel(0xffffffff, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_STATUS_1_REG);
-+	writel(0xffffffff, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_STATUS_2_REG);
-+	writel(0xffffffff, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_STATUS_3_REG);
-+	writel(0xffffffff, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_STATUS_4_REG);
-+
-+	// Init select registers
-+	writel(0, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_0_REG);
-+	writel(0, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_1_REG);
-+	writel(0, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_2_REG);
-+	writel(0, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_3_REG);
-+	writel(0, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_4_REG);
-+
-+	// disable all interrupt
-+	writel(0, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_0_REG);
-+	writel(0, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_1_REG);
-+	writel(0, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_2_REG);
-+	writel(0, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_3_REG);
-+	writel(0, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_4_REG);
-+}
-+
-+/*----------------------------------------------------------------------
-+*	toe_init_gmac
-+*----------------------------------------------------------------------*/
-+static void toe_init_gmac(struct net_device *dev)
-+{
-+	GMAC_INFO_T		*tp = dev->priv;
-+	TOE_INFO_T		*toe;
-+	u32 			data;
-+
-+	if (!gmac_initialized)
-+		return ;
-+
-+	if (!tp->existed)
-+		return;
-+
-+	tp->dev = dev;
-+	tp->flow_control_enable = 1;
-+	tp->pre_phy_status = LINK_DOWN;
-+	tp->full_duplex_status = tp->full_duplex_cfg;
-+	tp->speed_status = tp->speed_status;
-+
-+#if 0
-+   /* get mac address from FLASH */
-+    gmac_get_mac_address();
-+#endif
-+
-+    /* set PHY register to start autonegition process */
-+    gmac_set_phy_status(dev);
-+
-+	/* GMAC initialization */
-+	if ( toe_gmac_init_chip(dev) )
-+	{
-+		printk ("GMAC %d init fail\n", tp->port_id);
-+	}
-+
-+    /* clear statistic counter */
-+    toe_gmac_clear_counter(dev);
-+
-+	memset((void *)&tp->ifStatics, 0, sizeof(struct net_device_stats));
-+
-+	/* -----------------------------------------------------------
-+	Enable GMAC interrupt & disable loopback
-+	Notes:
-+		GMACx init routine (for eCOS) or open routine (for Linux)
-+		enable the interrupt bits only which are selected for him.
-+	--------------------------------------------------------------*/
-+	toe = (TOE_INFO_T *)&toe_private_data;
-+
-+	// Enable Interrupt Bits
-+	if (tp->port_id == 0)
-+	{
-+		tp->intr0_selected =	GMAC0_TXDERR_INT_BIT	 | GMAC0_TXPERR_INT_BIT		|
-+	                         	GMAC0_RXDERR_INT_BIT	 | GMAC0_RXPERR_INT_BIT		|
-+	                            GMAC0_SWTQ05_FIN_INT_BIT | GMAC0_SWTQ05_EOF_INT_BIT |
-+	                            GMAC0_SWTQ04_FIN_INT_BIT | GMAC0_SWTQ04_EOF_INT_BIT |
-+	                            GMAC0_SWTQ03_FIN_INT_BIT | GMAC0_SWTQ03_EOF_INT_BIT |
-+	                            GMAC0_SWTQ02_FIN_INT_BIT | GMAC0_SWTQ02_EOF_INT_BIT |
-+	                            GMAC0_SWTQ01_FIN_INT_BIT | GMAC0_SWTQ01_EOF_INT_BIT |
-+	                            GMAC0_SWTQ00_FIN_INT_BIT | GMAC0_SWTQ00_EOF_INT_BIT;
-+
-+#ifdef GMAX_TX_INTR_DISABLED
-+	    tp->intr0_enabled =		0;
-+#else
-+	    tp->intr0_enabled =		GMAC0_SWTQ00_FIN_INT_BIT | GMAC0_SWTQ00_EOF_INT_BIT;
-+#endif
-+
-+	    tp->intr1_selected =	TOE_IQ_ALL_BITS			 | TOE_CLASS_RX_INT_BITS	|
-+	    						GMAC0_HWTQ03_EOF_INT_BIT | GMAC0_HWTQ02_EOF_INT_BIT |
-+	    						GMAC0_HWTQ01_EOF_INT_BIT | GMAC0_HWTQ00_EOF_INT_BIT |
-+	    						DEFAULT_Q0_INT_BIT;
-+	    tp->intr1_enabled = 	DEFAULT_Q0_INT_BIT | TOE_IQ_ALL_BITS;
-+	    tp->intr2_selected = 	0xffffffff;	 // TOE Queue 32-63 FUUL Intr
-+	    tp->intr2_enabled = 	0xffffffff;
-+	    tp->intr3_selected = 	0xffffffff;	 // TOE Queue 0-31 FUUL Intr
-+	    tp->intr3_enabled = 	0xffffffff;
-+	    tp->intr4_selected = 	GMAC0_INT_BITS | CLASS_RX_FULL_INT_BITS |
-+	    						HWFQ_EMPTY_INT_BIT | SWFQ_EMPTY_INT_BIT;
-+	    tp->intr4_enabled = 	GMAC0_INT_BITS | SWFQ_EMPTY_INT_BIT;
-+
-+	    data = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_0_REG) & ~tp->intr0_selected;
-+	    writel(data, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_0_REG);
-+	    data = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_1_REG) & ~tp->intr1_selected;
-+	    writel(data, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_1_REG);
-+	    data = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_2_REG) & ~tp->intr2_selected;
-+	    writel(data, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_2_REG);
-+	    data = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_3_REG) & ~tp->intr3_selected;
-+	    writel(data, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_3_REG);
-+	    data = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_4_REG) & ~tp->intr4_selected;
-+	    writel(data, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_4_REG);
-+	}
-+	else
-+	{
-+		tp->intr0_selected =	GMAC1_TXDERR_INT_BIT	 | GMAC1_TXPERR_INT_BIT		|
-+	                         	GMAC1_RXDERR_INT_BIT	 | GMAC1_RXPERR_INT_BIT		|
-+	                            GMAC1_SWTQ15_FIN_INT_BIT | GMAC1_SWTQ15_EOF_INT_BIT |
-+	                            GMAC1_SWTQ14_FIN_INT_BIT | GMAC1_SWTQ14_EOF_INT_BIT |
-+	                            GMAC1_SWTQ13_FIN_INT_BIT | GMAC1_SWTQ13_EOF_INT_BIT |
-+	                            GMAC1_SWTQ12_FIN_INT_BIT | GMAC1_SWTQ12_EOF_INT_BIT |
-+	                            GMAC1_SWTQ11_FIN_INT_BIT | GMAC1_SWTQ11_EOF_INT_BIT |
-+	                            GMAC1_SWTQ10_FIN_INT_BIT | GMAC1_SWTQ10_EOF_INT_BIT;
-+#ifdef GMAX_TX_INTR_DISABLED
-+	    tp->intr0_enabled =		0;
-+#else
-+	    tp->intr0_enabled =		GMAC1_SWTQ10_FIN_INT_BIT | GMAC1_SWTQ10_EOF_INT_BIT;
-+#endif
-+
-+	    tp->intr1_selected =	DEFAULT_Q1_INT_BIT;
-+	    tp->intr1_enabled = 	DEFAULT_Q1_INT_BIT | TOE_IQ_ALL_BITS;
-+	    tp->intr2_selected = 	0;	 // TOE Queue 32-63 FUUL Intr
-+	    tp->intr2_enabled = 	0;
-+	    tp->intr3_selected = 	0;	 // TOE Queue 0-31 FUUL Intr
-+	    tp->intr3_enabled = 	0;
-+	    tp->intr4_selected = 	GMAC1_INT_BITS;
-+	    tp->intr4_enabled = 	GMAC1_INT_BITS;
-+
-+	    if (toe->gmac[0].existed != GMAC_EXISTED_FLAG)
-+	    {
-+	    	tp->intr1_selected	|= 	TOE_IQ_ALL_BITS | TOE_CLASS_RX_INT_BITS	|
-+	    						  	GMAC0_HWTQ03_EOF_INT_BIT | GMAC0_HWTQ02_EOF_INT_BIT |
-+	    						  	GMAC0_HWTQ01_EOF_INT_BIT | GMAC0_HWTQ00_EOF_INT_BIT;
-+	    	tp->intr1_enabled	|= 	TOE_IQ_ALL_BITS;
-+	    	tp->intr2_selected	|= 	0xffffffff;	 // TOE Queue 32-63 FUUL Intr
-+	    	tp->intr2_enabled	|= 	0xffffffff;
-+	    	tp->intr3_selected	|= 	0xffffffff;	 // TOE Queue 0-31 FUUL Intr
-+	    	tp->intr3_enabled	|= 	0xffffffff;
-+	    	tp->intr4_selected 	|= 	CLASS_RX_FULL_INT_BITS |
-+	    							HWFQ_EMPTY_INT_BIT | SWFQ_EMPTY_INT_BIT;
-+	    	tp->intr4_enabled	|= 	SWFQ_EMPTY_INT_BIT;
-+		}
-+	    data = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_0_REG) | tp->intr0_selected;
-+	    writel(data, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_0_REG);
-+	    data = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_1_REG) | tp->intr1_selected;
-+	    writel(data, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_1_REG);
-+	    data = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_2_REG) | tp->intr2_selected;
-+	    writel(data, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_2_REG);
-+	    data = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_3_REG) | tp->intr3_selected;
-+	    writel(data, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_3_REG);
-+	    data = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_4_REG) | tp->intr4_selected;
-+	    writel(data, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_4_REG);
-+	}
-+
-+	// enable only selected bits
-+	gmac_write_reg(TOE_GLOBAL_BASE, GLOBAL_INTERRUPT_ENABLE_0_REG,
-+					tp->intr0_enabled, tp->intr0_selected);
-+	gmac_write_reg(TOE_GLOBAL_BASE, GLOBAL_INTERRUPT_ENABLE_1_REG,
-+					tp->intr1_enabled, tp->intr1_selected);
-+	gmac_write_reg(TOE_GLOBAL_BASE, GLOBAL_INTERRUPT_ENABLE_2_REG,
-+					tp->intr2_enabled, tp->intr2_selected);
-+	gmac_write_reg(TOE_GLOBAL_BASE, GLOBAL_INTERRUPT_ENABLE_3_REG,
-+					tp->intr3_enabled, tp->intr3_selected);
-+	gmac_write_reg(TOE_GLOBAL_BASE, GLOBAL_INTERRUPT_ENABLE_4_REG,
-+					tp->intr4_enabled, tp->intr4_selected);
-+
-+    /* start DMA process */
-+	toe_gmac_hw_start(dev);
-+
-+    /* enable tx/rx register */
-+    toe_gmac_enable_tx_rx(dev);
-+
-+//	toe_gmac_enable_interrupt(tp->irq);
-+
-+    return ;
-+}
-+
-+
-+/*----------------------------------------------------------------------
-+* toe_gmac_sw_reset
-+*----------------------------------------------------------------------*/
-+static void toe_gmac_sw_reset(void)
-+{
-+	unsigned int	reg_val;
-+	reg_val = readl(GMAC_GLOBAL_BASE_ADDR+GLOBAL_RESET_REG) | 0x00000060;   /* GMAC0 S/W reset */
-+    writel(reg_val,GMAC_GLOBAL_BASE_ADDR+GLOBAL_RESET_REG);
-+    udelay(100);
-+    return;
-+}
-+
-+/*----------------------------------------------------------------------
-+*	toe_gmac_init_chip
-+*----------------------------------------------------------------------*/
-+static int toe_gmac_init_chip(struct net_device *dev)
-+{
-+	GMAC_INFO_T 	*tp = dev->priv;
-+	GMAC_CONFIG2_T	config2_val;
-+	GMAC_CONFIG0_T	config0,config0_mask;
-+	GMAC_CONFIG1_T	config1;
-+	#ifdef CONFIG_SL351x_NAT
-+	GMAC_CONFIG3_T	config3_val;
-+	#endif
-+	GMAC_TX_WCR0_T	hw_weigh;
-+	GMAC_TX_WCR1_T	sw_weigh;
-+//	GMAC_HASH_ENABLE_REG0_T hash_ctrl;
-+//
-+#if 0 /* mac address will be set in late_initcall */
-+	struct sockaddr sock;
-+	// GMAC_AHB_WEIGHT_T	ahb_weight, ahb_weight_mask;
-+
-+
-+	/* set station MAC address1 and address2 */
-+	memcpy(&sock.sa_data[0],ð_mac[tp->port_id][0],6);
-+	gmac_set_mac_address(dev,(void *)&sock);
-+#endif
-+
-+	/* set RX_FLTR register to receive all multicast packet */
-+	gmac_write_reg(tp->base_addr, GMAC_RX_FLTR, 0x00000007,0x0000001f);
-+	//    gmac_write_reg(tp->base_addr, GMAC_RX_FLTR, 0x00000007,0x0000001f);
-+	//gmac_write_reg(tp->base_addr, GMAC_RX_FLTR,0x00000007,0x0000001f);
-+
-+	/* set per packet buffer size */
-+	//	config1.bits32 = 0x002004;	//next version
-+	/* set flow control threshold */
-+	config1.bits32 = 0;
-+	config1.bits.set_threshold = 32 / 2;
-+	config1.bits.rel_threshold = 32 / 4 * 3;
-+	gmac_write_reg(tp->base_addr, GMAC_CONFIG1, config1.bits32, 0xffffffff);
-+
-+	/* set flow control threshold */
-+	config2_val.bits32 = 0;
-+	config2_val.bits.set_threshold = TOE_SW_FREEQ_DESC_NUM/2;
-+	config2_val.bits.rel_threshold = TOE_SW_FREEQ_DESC_NUM*3/4;
-+	gmac_write_reg(tp->base_addr, GMAC_CONFIG2, config2_val.bits32,0xffffffff);
-+
-+	#ifdef CONFIG_SL351x_NAT
-+	/* set HW free queue flow control threshold */
-+	config3_val.bits32 = 0;
-+	config3_val.bits.set_threshold = PAUSE_SET_HW_FREEQ;
-+	config3_val.bits.rel_threshold = PAUSE_REL_HW_FREEQ;
-+	gmac_write_reg(tp->base_addr, GMAC_CONFIG3, config3_val.bits32,0xffffffff);
-+	#endif
-+	/* set_mcast_filter mask*/
-+	//	gmac_write_reg(tp->base_addr,GMAC_MCAST_FIL0,0x0,0xffffffff);
-+	//  gmac_write_reg(tp->base_addr,GMAC_MCAST_FIL1,0x0,0xffffffff);
-+
-+	/* disable TX/RX and disable internal loop back */
-+	config0.bits32 = 0;
-+	config0_mask.bits32 = 0;
-+
-+	//debug_Aaron
-+#ifdef	L2_jumbo_frame
-+	config0.bits.max_len = 5;
-+#else
-+	config0.bits.max_len = 2;
-+#endif
-+
-+	if (tp->flow_control_enable==1)
-+	{
-+		config0.bits.tx_fc_en = 1; /* enable tx flow control */
-+		config0.bits.rx_fc_en = 1; /* enable rx flow control */
-+		printk("Enable MAC Flow Control...\n");
-+	}
-+	else
-+	{
-+		config0.bits.tx_fc_en = 0; /* disable tx flow control */
-+		config0.bits.rx_fc_en = 0; /* disable rx flow control */
-+		printk("Disable MAC Flow Control...\n");
-+	}
-+	config0.bits.dis_rx = 1;  /* disable rx */
-+	config0.bits.dis_tx = 1;  /* disable tx */
-+	config0.bits.loop_back = 0; /* enable/disable GMAC loopback */
-+	config0.bits.rx_err_detect = 1;
-+	config0.bits.rgmii_en = 0;
-+	config0.bits.rgmm_edge = 1;
-+	config0.bits.rxc_inv = 0;
-+	config0.bits.ipv4_rx_chksum = 1;  /* enable H/W to check ip checksum */
-+	config0.bits.ipv6_rx_chksum = 1;  /* enable H/W to check ip checksum */
-+	config0.bits.port0_chk_hwq = 1;	// GaryChen 3/24/2006 2:26PM
-+	config0.bits.port1_chk_hwq = 1;	// GaryChen 3/24/2006 2:26PM
-+	config0.bits.port0_chk_toeq = 1;
-+	config0.bits.port1_chk_toeq = 1;
-+	config0.bits.port0_chk_classq = 1;
-+	config0.bits.port1_chk_classq = 1;
-+
-+	config0_mask.bits.max_len = 7;
-+	config0_mask.bits.tx_fc_en = 1;
-+	config0_mask.bits.rx_fc_en = 1;
-+	config0_mask.bits.dis_rx = 1;
-+	config0_mask.bits.dis_tx = 1;
-+	config0_mask.bits.loop_back = 1;
-+	config0_mask.bits.rgmii_en = 1;
-+	config0_mask.bits.rgmm_edge = 1;
-+	config0_mask.bits.rxc_inv = 1;
-+	config0_mask.bits.ipv4_rx_chksum = 1;
-+	config0_mask.bits.ipv6_rx_chksum = 1;
-+	config0_mask.bits.port0_chk_hwq = 1;
-+	config0_mask.bits.port1_chk_hwq = 1;
-+	config0_mask.bits.port0_chk_toeq = 1;
-+	config0_mask.bits.port1_chk_toeq = 1;
-+	config0_mask.bits.port0_chk_classq = 1;
-+	config0_mask.bits.port1_chk_classq = 1;
-+	config0_mask.bits.rx_err_detect = 1;
-+
-+	#if 0
-+	config0.bits.dis_rx = 1;  /* disable rx */
-+	config0.bits.dis_tx = 1;  /* disable tx */
-+	config0.bits.loop_back = 0; /* enable/disable GMAC loopback */
-+	config0.bits.txc_inv = 0;
-+	config0.bits.rgmii_en = 0;
-+	config0.bits.rgmm_edge = 1;
-+	config0.bits.rxc_inv = 1;
-+	config0.bits.ipv4_tss_rx_en = 1;  /* enable H/W to check ip checksum */
-+	config0.bits.ipv6_tss_rx_en = 1;  /* enable H/W to check ip checksum */
-+
-+	config0_mask.bits.max_len = 3;
-+	config0_mask.bits.tx_fc_en = 1;
-+	config0_mask.bits.rx_fc_en = 1;
-+	config0_mask.bits.dis_rx = 1;
-+	config0_mask.bits.dis_tx = 1;
-+	config0_mask.bits.loop_back = 1;
-+	config0_mask.bits.rgmii_en = 1;
-+	config0_mask.bits.rgmm_edge = 1;
-+	config0_mask.bits.txc_inv = 1;
-+	config0_mask.bits.rxc_inv = 1;
-+	config0_mask.bits.ipv4_tss_rx_en = 1;
-+	config0_mask.bits.ipv6_tss_rx_en = 1;
-+	#endif
-+
-+	gmac_write_reg(tp->base_addr, GMAC_CONFIG0, config0.bits32,config0_mask.bits32);
-+
-+	#if 1
-+	hw_weigh.bits32 = 0;
-+	hw_weigh.bits.hw_tq3 = 1;
-+	hw_weigh.bits.hw_tq2 = 1;
-+	hw_weigh.bits.hw_tq1 = 1;
-+	hw_weigh.bits.hw_tq0 = 1;
-+	gmac_write_reg(tp->dma_base_addr, GMAC_TX_WEIGHTING_CTRL_0_REG, hw_weigh.bits32, 0xffffffff);
-+
-+	sw_weigh.bits32 = 0;
-+	sw_weigh.bits.sw_tq5 = 1;
-+	sw_weigh.bits.sw_tq4 = 1;
-+	sw_weigh.bits.sw_tq3 = 1;
-+	sw_weigh.bits.sw_tq2 = 1;
-+	sw_weigh.bits.sw_tq1 = 1;
-+	sw_weigh.bits.sw_tq0 = 1;
-+	gmac_write_reg(tp->dma_base_addr, GMAC_TX_WEIGHTING_CTRL_1_REG, sw_weigh.bits32, 0xffffffff);
-+	#endif
-+
-+	#if 0
-+	ahb_weight.bits32 = 0;
-+	ahb_weight_mask.bits32 = 0;
-+	ahb_weight.bits.rx_weight = 1;
-+	ahb_weight.bits.tx_weight = 1;
-+	ahb_weight.bits.hash_weight = 1;
-+	ahb_weight.bits.pre_req = 0x1f;
-+	ahb_weight.bits.tqDV_threshold = 0;
-+	ahb_weight_mask.bits.rx_weight = 0x1f;
-+	ahb_weight_mask.bits.tx_weight = 0x1f;
-+	ahb_weight_mask.bits.hash_weight = 0x1f;
-+	ahb_weight_mask.bits.pre_req = 0x1f;
-+	ahb_weight_mask.bits.tqDV_threshold = 0x1f;
-+	gmac_write_reg(tp->dma_base_addr, GMAC_AHB_WEIGHT_REG, ahb_weight.bits32, ahb_weight_mask.bits32);
-+	#endif
-+
-+	#if defined(CONFIG_SL351x_NAT) || defined(CONFIG_SL351x_RXTOE)
-+	gmac_write_reg(tp->dma_base_addr, GMAC_SPR0, IPPROTO_TCP, 0xffffffff);
-+	#endif
-+	#ifdef CONFIG_SL351x_NAT
-+	gmac_write_reg(tp->dma_base_addr, GMAC_SPR1, IPPROTO_UDP, 0xffffffff);
-+	gmac_write_reg(tp->dma_base_addr, GMAC_SPR2, IPPROTO_GRE, 0xffffffff);
-+	gmac_write_reg(tp->dma_base_addr, GMAC_SPR3, 0xff, 0xffffffff);
-+	gmac_write_reg(tp->dma_base_addr, GMAC_SPR4, 0xff, 0xffffffff);
-+	gmac_write_reg(tp->dma_base_addr, GMAC_SPR5, 0xff, 0xffffffff);
-+	gmac_write_reg(tp->dma_base_addr, GMAC_SPR6, 0xff, 0xffffffff);
-+	gmac_write_reg(tp->dma_base_addr, GMAC_SPR7, 0xff, 0xffffffff);
-+
-+	sl351x_nat_init();
-+	#endif
-+
-+	#ifdef CONFIG_SL351x_RXTOE
-+	/* setup matching rule to TOE */
-+	sl351x_toe_init();
-+	#endif
-+
-+	// for A1 ASIC version
-+//	hash_ctrl.bits32 = 0;
-+//	hash_ctrl.bits.timing = 6;
-+//	gmac_write_reg(tp->dma_base_addr, GMAC_HASH_ENGINE_REG0, hash_ctrl.bits32, 0xffffffff);
-+
-+	return (0);
-+}
-+
-+/*----------------------------------------------------------------------
-+*	toe_gmac_enable_tx_rx
-+*----------------------------------------------------------------------*/
-+static void toe_gmac_enable_tx_rx(struct net_device *dev)
-+{
-+	GMAC_INFO_T		*tp = dev->priv;
-+	GMAC_CONFIG0_T	config0,config0_mask;
-+
-+    /* enable TX/RX */
-+    config0.bits32 = 0;
-+    config0_mask.bits32 = 0;
-+    config0.bits.dis_rx = 0;  /* enable rx */
-+    config0.bits.dis_tx = 0;  /* enable tx */
-+    config0_mask.bits.dis_rx = 1;
-+    config0_mask.bits.dis_tx = 1;
-+    gmac_write_reg(tp->base_addr, GMAC_CONFIG0, config0.bits32,config0_mask.bits32);
-+}
-+/*----------------------------------------------------------------------
-+*	toe_gmac_disable_rx
-+*----------------------------------------------------------------------*/
-+#if 0
-+static void toe_gmac_disable_rx(struct net_device *dev)
-+{
-+	GMAC_INFO_T		*tp = dev->priv;
-+	GMAC_CONFIG0_T	config0,config0_mask;
-+
-+    /* enable TX/RX */
-+    config0.bits32 = 0;
-+    config0_mask.bits32 = 0;
-+    config0.bits.dis_rx = 1;  /* disable rx */
-+//    config0.bits.dis_tx = 1;  /* disable tx */
-+    config0_mask.bits.dis_rx = 1;
-+//     config0_mask.bits.dis_tx = 1;
-+    gmac_write_reg(tp->base_addr, GMAC_CONFIG0, config0.bits32,config0_mask.bits32);
-+}
-+#endif
-+/*----------------------------------------------------------------------
-+*	toe_gmac_enable_rx
-+*----------------------------------------------------------------------*/
-+#if 0
-+static void toe_gmac_enable_rx(struct net_device *dev)
-+{
-+	GMAC_INFO_T		*tp = dev->priv;
-+	GMAC_CONFIG0_T	config0,config0_mask;
-+
-+    /* enable TX/RX */
-+    config0.bits32 = 0;
-+    config0_mask.bits32 = 0;
-+    config0.bits.dis_rx = 0;  /* enable rx */
-+//    config0.bits.dis_tx = 0;  /* enable tx */
-+    config0_mask.bits.dis_rx = 1;
-+//    config0_mask.bits.dis_tx = 1;
-+    gmac_write_reg(tp->base_addr, GMAC_CONFIG0, config0.bits32,config0_mask.bits32);
-+}
-+#endif
-+/*----------------------------------------------------------------------
-+*	toe_gmac_disable_tx_rx
-+*----------------------------------------------------------------------*/
-+static void toe_gmac_disable_tx_rx(struct net_device *dev)
-+{
-+	GMAC_INFO_T		*tp = dev->priv;
-+	GMAC_CONFIG0_T	config0,config0_mask;
-+
-+    /* enable TX/RX */
-+    config0.bits32 = 0;
-+    config0_mask.bits32 = 0;
-+    config0.bits.dis_rx = 1;  /* disable rx */
-+    config0.bits.dis_tx = 1;  /* disable tx */
-+    config0_mask.bits.dis_rx = 1;
-+    config0_mask.bits.dis_tx = 1;
-+    gmac_write_reg(tp->base_addr, GMAC_CONFIG0, config0.bits32,config0_mask.bits32);
-+}
-+
-+/*----------------------------------------------------------------------
-+*	toe_gmac_hw_start
-+*----------------------------------------------------------------------*/
-+static void toe_gmac_hw_start(struct net_device *dev)
-+{
-+	GMAC_INFO_T				*tp = (GMAC_INFO_T *)dev->priv;
-+	GMAC_DMA_CTRL_T			dma_ctrl, dma_ctrl_mask;
-+
-+
-+    /* program dma control register */
-+	dma_ctrl.bits32 = 0;
-+	dma_ctrl.bits.rd_enable = 1;
-+	dma_ctrl.bits.td_enable = 1;
-+	dma_ctrl.bits.loopback = 0;
-+	dma_ctrl.bits.drop_small_ack = 0;
-+	dma_ctrl.bits.rd_prot = 0;
-+	dma_ctrl.bits.rd_burst_size = 3;
-+	dma_ctrl.bits.rd_insert_bytes = RX_INSERT_BYTES;
-+	dma_ctrl.bits.rd_bus = 3;
-+	dma_ctrl.bits.td_prot = 0;
-+	dma_ctrl.bits.td_burst_size = 3;
-+	dma_ctrl.bits.td_bus = 3;
-+
-+	dma_ctrl_mask.bits32 = 0;
-+	dma_ctrl_mask.bits.rd_enable = 1;
-+	dma_ctrl_mask.bits.td_enable = 1;
-+	dma_ctrl_mask.bits.loopback = 1;
-+	dma_ctrl_mask.bits.drop_small_ack = 1;
-+	dma_ctrl_mask.bits.rd_prot = 3;
-+	dma_ctrl_mask.bits.rd_burst_size = 3;
-+	dma_ctrl_mask.bits.rd_insert_bytes = 3;
-+	dma_ctrl_mask.bits.rd_bus = 3;
-+	dma_ctrl_mask.bits.td_prot = 0x0f;
-+	dma_ctrl_mask.bits.td_burst_size = 3;
-+	dma_ctrl_mask.bits.td_bus = 3;
-+
-+	gmac_write_reg(tp->dma_base_addr, GMAC_DMA_CTRL_REG, dma_ctrl.bits32, dma_ctrl_mask.bits32);
-+
-+    return;
-+}
-+
-+/*----------------------------------------------------------------------
-+*	toe_gmac_hw_stop
-+*----------------------------------------------------------------------*/
-+static void toe_gmac_hw_stop(struct net_device *dev)
-+{
-+	GMAC_INFO_T			*tp = (GMAC_INFO_T *)dev->priv;
-+	GMAC_DMA_CTRL_T		dma_ctrl, dma_ctrl_mask;
-+
-+    /* program dma control register */
-+	dma_ctrl.bits32 = 0;
-+	dma_ctrl.bits.rd_enable = 0;
-+	dma_ctrl.bits.td_enable = 0;
-+
-+	dma_ctrl_mask.bits32 = 0;
-+	dma_ctrl_mask.bits.rd_enable = 1;
-+	dma_ctrl_mask.bits.td_enable = 1;
-+
-+	gmac_write_reg(tp->dma_base_addr, GMAC_DMA_CTRL_REG, dma_ctrl.bits32, dma_ctrl_mask.bits32);
-+}
-+
-+/*----------------------------------------------------------------------
-+*	toe_gmac_clear_counter
-+*----------------------------------------------------------------------*/
-+static int toe_gmac_clear_counter (struct net_device *dev)
-+{
-+	GMAC_INFO_T	*tp = (GMAC_INFO_T *)dev->priv;
-+
-+    /* clear counter */
-+    gmac_read_reg(tp->base_addr, GMAC_IN_DISCARDS);
-+    gmac_read_reg(tp->base_addr, GMAC_IN_ERRORS);
-+    gmac_read_reg(tp->base_addr, GMAC_IN_MCAST);
-+    gmac_read_reg(tp->base_addr, GMAC_IN_BCAST);
-+    gmac_read_reg(tp->base_addr, GMAC_IN_MAC1);
-+    gmac_read_reg(tp->base_addr, GMAC_IN_MAC2);
-+		tp->ifStatics.tx_bytes = 0;
-+		tp->ifStatics.tx_packets = 0;
-+		tp->ifStatics.tx_errors = 0;
-+		tp->ifStatics.rx_bytes = 0;
-+		tp->ifStatics.rx_packets = 0;
-+		tp->ifStatics.rx_errors = 0;
-+		tp->ifStatics.rx_dropped = 0;
-+	return (0);
-+}
-+
-+
-+/*----------------------------------------------------------------------
-+*	toe_gmac_tx_complete
-+*----------------------------------------------------------------------*/
-+static  void toe_gmac_tx_complete(GMAC_INFO_T *tp, unsigned int tx_qid,
-+   										struct net_device *dev, int interrupt)
-+{
-+	volatile GMAC_TXDESC_T	*curr_desc;
-+	GMAC_TXDESC_0_T			word0;
-+	GMAC_TXDESC_1_T			word1;
-+	unsigned int			desc_count;
-+//	struct net_device_stats *isPtr = (struct net_device_stats *)&tp->ifStatics;
-+	GMAC_SWTXQ_T			*swtxq;
-+	DMA_RWPTR_T				rwptr;
-+
-+	/* get tx H/W completed descriptor virtual address */
-+	/* check tx status and accumulate tx statistics */
-+	swtxq = &tp->swtxq[tx_qid];
-+	swtxq->intr_cnt++;
-+	for (;;)
-+	{
-+		rwptr.bits32 = readl(swtxq->rwptr_reg);
-+		if (rwptr.bits.rptr == swtxq->finished_idx)
-+			break;
-+    	curr_desc = (volatile GMAC_TXDESC_T *)swtxq->desc_base + swtxq->finished_idx;
-+//   		consistent_sync((void *)curr_desc, sizeof(GMAC_TXDESC_T), PCI_DMA_FROMDEVICE);
-+		word0.bits32 = curr_desc->word0.bits32;
-+		word1.bits32 = curr_desc->word1.bits32;
-+
-+		if (word0.bits.status_tx_ok)
-+		{
-+			tp->ifStatics.tx_bytes += word1.bits.byte_count;
-+			desc_count = word0.bits.desc_count;
-+			if (desc_count==0)
-+			{
-+				printk("%s::Desc 0x%x = 0x%x, desc_count=%d\n",__func__, (u32)curr_desc, word0.bits32, desc_count);
-+				while(1);
-+			}
-+			while (--desc_count)
-+			{
-+				word0.bits.status_tx_ok = 0;
-+				curr_desc->word0.bits32 = word0.bits32;
-+				swtxq->finished_idx = RWPTR_ADVANCE_ONE(swtxq->finished_idx, swtxq->total_desc_num);
-+				curr_desc = (GMAC_TXDESC_T *)swtxq->desc_base + swtxq->finished_idx;
-+				word0.bits32 = curr_desc->word0.bits32;
-+#ifdef _DUMP_TX_TCP_CONTENT
-+				if (curr_desc->word0.bits.buffer_size < 16)
-+				{
-+					int a;
-+					char *datap;
-+					printk("\t Tx Finished Desc 0x%x Len %d Addr 0x%08x: ", (u32)curr_desc, curr_desc->word0.bits.buffer_size, curr_desc->word2.buf_adr);
-+					datap = (char *)__va(curr_desc->word2.buf_adr);
-+					for (a=0; a<8 && aword0.bits.buffer_size; a++, datap++)
-+					{
-+						printk("0x%02x ", *datap);
-+					}
-+					printk("\n");
-+				}
-+#endif
-+			}
-+
-+			word0.bits.status_tx_ok = 0;
-+			if (swtxq->tx_skb[swtxq->finished_idx])
-+			{
-+				if (interrupt)
-+					dev_kfree_skb_irq(swtxq->tx_skb[swtxq->finished_idx]);
-+				else
-+					dev_kfree_skb(swtxq->tx_skb[swtxq->finished_idx]);
-+				swtxq->tx_skb[swtxq->finished_idx] = NULL;
-+			}
-+			curr_desc->word0.bits32 = word0.bits32;
-+  			swtxq->curr_finished_desc = (GMAC_TXDESC_T *)curr_desc;
-+ 			swtxq->total_finished++;
-+  			tp->ifStatics.tx_packets++;
-+			swtxq->finished_idx = RWPTR_ADVANCE_ONE(swtxq->finished_idx, swtxq->total_desc_num);
-+		}
-+		else
-+		{
-+			// tp->ifStatics.tx_errors++;
-+			// printk("%s::Tx Descriptor is !!!\n",__func__);
-+			// wait ready by breaking
-+			break;
-+		}
-+	}
-+
-+	if (netif_queue_stopped(dev))
-+	{
-+		netif_wake_queue(dev);
-+	}
-+}
-+
-+/*----------------------------------------------------------------------
-+*	gmac_start_xmit
-+*----------------------------------------------------------------------*/
-+static int gmac_start_xmit(struct sk_buff *skb, struct net_device *dev)
-+{
-+	GMAC_INFO_T 			*tp= dev->priv;
-+//	static unsigned int     pcount = 0;
-+//	unsigned int			tx_qid;
-+    DMA_RWPTR_T				rwptr;
-+	volatile GMAC_TXDESC_T	*curr_desc;
-+	int 					snd_pages = skb_shinfo(skb)->nr_frags + 1;  /* get number of descriptor */
-+	int 					frag_id = 0;
-+	int 					len, total_len = skb->len;
-+	struct net_device_stats *isPtr;
-+	unsigned int			free_desc;
-+	GMAC_SWTXQ_T			*swtxq;
-+	register unsigned long	word0, word1, word2, word3;
-+	unsigned short			wptr, rptr;
-+#ifdef	L2_jumbo_frame
-+	int header_len = skb->len;
-+	struct iphdr	*ip_hdr;
-+    struct tcphdr	*tcp_hdr;
-+    int             tcp_hdr_len;
-+    unsigned char 	*ptr;
-+    int             data_len,a;
-+    unsigned int    val;
-+#endif
-+
-+#ifdef GMAC_LEN_1_2_ISSUE
-+	int						total_pages;
-+	total_pages = snd_pages;
-+#endif
-+
-+	isPtr = (struct net_device_stats *)&tp->ifStatics;
-+#if 1
-+	if (skb->len >= 0x10000)
-+	{
-+//		spin_unlock(&tp->tx_mutex);
-+		isPtr->tx_dropped++;
-+		printk("%s::[GMAC %d] skb->len %d >= 64K\n", __func__, tp->port_id, skb->len);
-+		netif_stop_queue(dev);
-+		return 1;
-+    }
-+#endif
-+
-+#if 0
-+	if (storlink_ctl.recvfile==2)
-+	{
-+	    printk("snd_pages=%d skb->len=%d\n",snd_pages,skb->len);
-+	}
-+#endif
-+
-+#ifdef GMAC_USE_TXQ0
-+	#define tx_qid 	0
-+#endif
-+
-+	swtxq = &tp->swtxq[tx_qid];
-+
-+//	spin_lock(&tp->tx_mutex);
-+    rwptr.bits32 = readl(swtxq->rwptr_reg);
-+	wptr = rwptr.bits.wptr;
-+	rptr = rwptr.bits.rptr;
-+
-+	// check finished desc or empty BD
-+	// cannot check by read ptr of RW PTR register,
-+	// because the HW complete to send but the SW may NOT handle it
-+#ifndef	GMAX_TX_INTR_DISABLED
-+	if (wptr >= swtxq->finished_idx)
-+		free_desc = swtxq->total_desc_num - wptr - 1 + swtxq->finished_idx;
-+	else
-+		free_desc = swtxq->finished_idx - wptr - 1;
-+
-+	if (free_desc < snd_pages)
-+	{
-+//		spin_unlock(&tp->tx_mutex);
-+		isPtr->tx_dropped++;
-+//		printk("GMAC %d No available descriptor!\n", tp->port_id);
-+		netif_stop_queue(dev);
-+		return 1;
-+    }
-+#else
-+	toe_gmac_tx_complete(tp, tx_qid, dev, 0);
-+
-+	if (wptr >= swtxq->finished_idx)
-+		free_desc = swtxq->total_desc_num - wptr - 1 + swtxq->finished_idx;
-+	else
-+		free_desc = swtxq->finished_idx - wptr - 1;
-+	if (free_desc < snd_pages)
-+	{
-+//		spin_unlock(&tp->tx_mutex);
-+		isPtr->tx_dropped++;
-+//		printk("GMAC %d No available descriptor!\n", tp->port_id);
-+		netif_stop_queue(dev);
-+		return 1;
-+    }
-+
-+#if 0
-+	printk("1: free_desc=%d, wptr=%d, finished_idx=%d\n", free_desc, wptr, swtxq->finished_idx);
-+	if ((free_desc < (snd_pages << 2)) ||
-+	    (free_desc < (swtxq->total_desc_num >> 2)))
-+	{
-+		printk("2: free_desc = %d\n", free_desc);
-+		toe_gmac_tx_complete(tp, tx_qid, dev, 0);
-+		rwptr.bits32 = readl(swtxq->rwptr_reg);
-+		wptr = rwptr.bits.wptr;
-+		if (wptr>= swtxq->finished_idx)
-+			free_desc = swtxq->total_desc_num - wptr -1 + swtxq->finished_idx;
-+		else
-+			free_desc = swtxq->finished_idx - wptr - 1;
-+	}
-+#endif
-+#endif
-+
-+#ifdef	L2_jumbo_frame
-+//		data_len = skb->len - 14 - ip_hdr->ihl *4 - tcp_hdr_len;
-+//		if ((skb->nh.iph->protocol == __constant_htons(ETH_P_IP)) && ((skb->nh.iph->protocol & 0x00ff)  == IPPROTO_TCP))
-+//		if (skb->nh.iph->protocol == 0x006 && (skb->nh.iph->protocol == __constant_htons(ETH_P_IP)))
-+		if (((skb->nh.iph->protocol & 0x00ff)  == IPPROTO_TCP))
-+		{
-+				ip_hdr = (struct iphdr*)(skb->nh.iph);
-+				tcp_hdr = (struct tcphdr*)(skb->h.th);
-+				tcp_hdr_len = TCPHDRLEN(tcp_hdr) * 4;
-+				tcp_hdr_len = TCPHDRLEN(tcp_hdr) * 4;
-+
-+				if ((skb->h.th->syn) && (tcp_hdr_len > 20))
-+				{
-+					ptr = (unsigned char *)(tcp_hdr+1);
-+					if ((ptr[0] == 0x02) && (ptr[1] == 0x04) && (ptr[2] == 0x07) && (ptr[3] == 0xba)) // 0x07 aa=2016-54=1962  ,0x07ba=2032-54=1978
-+					{
-+						ptr[2]=0x20;	//23
-+						ptr[3]=0x00;   	//00
-+						printk("-----> Change MSS to 8K \n" );
-+					}
-+				}
-+		}
-+//		if ((ip_hdr->protocol & 0x00ff) != IPPROTO_TCP)
-+//		if ((tcp_hdr_len > 20) && (skb->h.th->syn))
-+#endif
-+
-+
-+#if 0
-+	if (snd_pages > 1)
-+		printk("-----> snd_pages=%d\n", snd_pages);
-+	if (total_len > 1514)
-+	{
-+		printk("-----> total_len=%d\n", total_len);
-+	}
-+#endif
-+
-+    while (snd_pages)
-+    {
-+    	char *pkt_datap;
-+
-+    	curr_desc = (GMAC_TXDESC_T *)swtxq->desc_base + wptr;
-+//		consistent_sync((void *)curr_desc, sizeof(GMAC_TXDESC_T), PCI_DMA_FROMDEVICE);
-+#if 0
-+//#if (GMAC_DEBUG==1)
-+    	// if curr_desc->word2.buf_adr !=0 means that the ISR does NOT handle it
-+    	// if (curr_desc->word2.buf_adr)
-+    	if (swtxq->tx_skb[wptr])
-+    	{
-+    		printk("Error! Stop due to TX descriptor's buffer is not freed!\n");
-+    		while(1);
-+    		dev_kfree_skb(swtxq->tx_skb[wptr]);
-+    		swtxq->tx_skb[wptr] = NULL;
-+		}
-+#endif
-+
-+		if (frag_id == 0)
-+		{
-+#if 0
-+			int i;
-+			pkt_datap = skb->data;
-+			len = total_len;
-+			for (i=0; inr_frags; i++)
-+			{
-+				skb_frag_t* frag = &skb_shinfo(skb)->frags[i];
-+				len -= frag->size;
-+			}
-+#else
-+			pkt_datap = skb->data;
-+			len = total_len - skb->data_len;
-+#endif
-+		}
-+		else
-+		{
-+			skb_frag_t* frag = &skb_shinfo(skb)->frags[frag_id-1];
-+			pkt_datap = page_address(frag->page) + frag->page_offset;
-+			len = frag->size;
-+			if (len > total_len)
-+			{
-+				printk("===> Fatal Error! Send Frag size %d > Total Size %d!!!!!\n",
-+					len, total_len);
-+			}
-+		}
-+
-+		/* set TX descriptor */
-+		/* copy packet to descriptor buffer address */
-+		// curr_desc->word0.bits32 = len;    /* total frame byte count */
-+		word0 = len;
-+#ifdef	L2_jumbo_frame
-+		word3 = (dev->mtu+14) | EOFIE_BIT;  //2016 ,2032
-+#else
-+		word3 = 1514 | EOFIE_BIT;
-+#endif
-+
-+#ifdef DO_HW_CHKSUM
-+#ifdef	L2_jumbo_frame
-+		if (total_len >= (dev->mtu+14) && (skb->nh.iph->protocol == 0x011) && skb->nh.iph && (skb->nh.iph->frag_off & __constant_htons(0x3fff)))
-+#else
-+		if (total_len <= 1514 && ip_hdr(skb) && (ip_hdr(skb)->frag_off & __constant_htons(0x3fff)))
-+#endif
-+			word1  = total_len |
-+					TSS_IP_CHKSUM_BIT  |
-+					TSS_IPV6_ENABLE_BIT |
-+					TSS_MTU_ENABLE_BIT;
-+		else
-+			word1 = total_len |
-+					TSS_UDP_CHKSUM_BIT |
-+					TSS_TCP_CHKSUM_BIT |
-+					TSS_IP_CHKSUM_BIT  |
-+					TSS_IPV6_ENABLE_BIT |
-+					TSS_MTU_ENABLE_BIT;
-+#else
-+		word1 = total_len | TSS_MTU_ENABLE_BIT;
-+#endif
-+		word2 = (unsigned long)__pa(pkt_datap);
-+
-+		if (frag_id == 0)
-+		{
-+			word3 |= SOF_BIT;	// SOF
-+		}
-+
-+		if (snd_pages == 1)
-+		{
-+			word3 |= EOF_BIT;	// EOF
-+			swtxq->tx_skb[wptr] = skb;
-+#ifdef CONFIG_SL351x_NAT
-+			if (nat_cfg.enabled && sl351x_nat_output(skb, tp->port_id))
-+				word1 |= TSS_IP_FIXED_LEN_BIT;
-+#endif
-+		}
-+		else
-+			swtxq->tx_skb[wptr] = NULL;
-+		// word1 |= TSS_IP_FIXED_LEN_BIT;
-+#if 1
-+#ifdef CONFIG_SL351x_RXTOE
-+		// check if this frame has the mission to enable toe hash entry..
-+		// if rx_max_pktsize ==0, do not enable RXTOE
-+		if (TCP_SKB_CB(skb)->connection && storlink_ctl.rx_max_pktsize) {
-+			set_toeq_hdr(TCP_SKB_CB(skb)->connection, &toe_private_data, dev);
-+		}
-+#endif
-+#endif
-+#ifdef _DUMP_TX_TCP_CONTENT
-+		if (len < 16 && frag_id && skb->h.th && (skb->h.th->source == __constant_htons(445) || skb->h.th->source == __constant_htons(139)))
-+		{
-+			int a;
-+			char *datap;
-+			printk("Tx Desc 0x%x Frag %d Len %d [IP-ID 0x%x] 0x%08x: ", (u32)curr_desc, frag_id, len, htons(skb->nh.iph->id), (u32)pkt_datap);
-+			datap = (char *)pkt_datap;
-+			for (a=0; a<8 && a= _DEBUG_PREFETCH_NUM)
-+				_debug_prefetch_cnt = 0;
-+		}
-+#endif
-+
-+		consistent_sync((void *)pkt_datap, len, PCI_DMA_TODEVICE);
-+		wmb();
-+		curr_desc->word0.bits32 = word0;
-+		curr_desc->word1.bits32 = word1;
-+		curr_desc->word2.bits32 = word2;
-+		curr_desc->word3.bits32 = word3;
-+		swtxq->curr_tx_desc = (GMAC_TXDESC_T *)curr_desc;
-+//		consistent_sync((void *)curr_desc, sizeof(GMAC_TXDESC_T), PCI_DMA_TODEVICE);
-+#ifdef _DUMP_TX_TCP_CONTENT
-+		if (len < 16 && frag_id && skb->h.th && (skb->h.th->source == __constant_htons(445) || skb->h.th->source == __constant_htons(139)))
-+		{
-+			int a;
-+			char *datap;
-+			printk("\t 0x%08x: ", (u32)pkt_datap);
-+			datap = (char *)pkt_datap;
-+			for (a=0; a<8 && atotal_desc_num);
-+		frag_id++;
-+		snd_pages--;
-+	}
-+
-+    swtxq->total_sent++;
-+	SET_WPTR(swtxq->rwptr_reg, wptr);
-+	dev->trans_start = jiffies;
-+
-+
-+	// printk("MAC %d Qid %d rwptr = 0x%x, curr_desc=0x%x\n", skb->tx_port_id, tx_qid, rwptr.bits32, curr_desc);
-+//#ifdef	GMAX_TX_INTR_DISABLED
-+//		toe_gmac_tx_complete(tp, tx_qid, dev, 0);
-+//#endif
-+	return (0);
-+}
-+
-+/*----------------------------------------------------------------------
-+* gmac_set_mac_address
-+*----------------------------------------------------------------------*/
-+
-+static int gmac_set_mac_address(struct net_device *dev, void *addr)
-+{
-+	GMAC_INFO_T		*tp= dev->priv;
-+	struct sockaddr *sock;
-+	unsigned int    reg_val;
-+    unsigned int    i;
-+
-+	sock = (struct sockaddr *) addr;
-+	for (i = 0; i < 6; i++)
-+	{
-+		dev->dev_addr[i] = sock->sa_data[i];
-+	}
-+
-+    reg_val = dev->dev_addr[0] + (dev->dev_addr[1]<<8) + (dev->dev_addr[2]<<16) + (dev->dev_addr[3]<<24);
-+    gmac_write_reg(tp->base_addr,GMAC_STA_ADD0,reg_val,0xffffffff);
-+    reg_val = dev->dev_addr[4] + (dev->dev_addr[5]<<8);
-+    gmac_write_reg(tp->base_addr,GMAC_STA_ADD1,reg_val,0x0000ffff);
-+	memcpy(ð_mac[tp->port_id][0],&dev->dev_addr[0],6);
-+
-+    printk("Storlink %s address = ",dev->name);
-+    printk("%02x",dev->dev_addr[0]);
-+    printk("%02x",dev->dev_addr[1]);
-+    printk("%02x",dev->dev_addr[2]);
-+    printk("%02x",dev->dev_addr[3]);
-+    printk("%02x",dev->dev_addr[4]);
-+    printk("%02x\n",dev->dev_addr[5]);
-+
-+    return (0);
-+}
-+
-+/*----------------------------------------------------------------------
-+* gmac_get_mac_address
-+*	get mac address from FLASH
-+*----------------------------------------------------------------------*/
-+static void gmac_get_mac_address(void)
-+{
-+#ifdef CONFIG_MTD
-+	extern int get_vlaninfo(vlaninfo* vlan);
-+    static vlaninfo    vlan[2];
-+
-+    if (get_vlaninfo(&vlan[0]))
-+    {
-+        memcpy((void *)ð_mac[0][0],vlan[0].mac,6);
-+        // VLAN_conf[0].vid = vlan[0].vlanid;
-+        // VLAN_conf[0].portmap = vlan[0].vlanmap;
-+        memcpy((void *)ð_mac[1][0],vlan[1].mac,6);
-+        // VLAN_conf[1].vid = vlan[1].vlanid;
-+        // VLAN_conf[1].portmap = vlan[1].vlanmap;
-+    }
-+#else
-+    unsigned int reg_val;
-+
-+    reg_val = readl(IO_ADDRESS(TOE_GMAC0_BASE)+0xac);
-+    eth_mac[0][4] = (reg_val & 0xff00) >> 8;
-+    eth_mac[0][5] = reg_val & 0x00ff;
-+    reg_val = readl(IO_ADDRESS(SL2312_SECURITY_BASE)+0xac);
-+    eth_mac[1][4] = (reg_val & 0xff00) >> 8;
-+    eth_mac[1][5] = reg_val & 0x00ff;
-+#endif
-+    return;
-+}
-+
-+
-+/*----------------------------------------------------------------------
-+* mac_stop_txdma
-+*----------------------------------------------------------------------*/
-+void mac_stop_txdma(struct net_device *dev)
-+{
-+	GMAC_INFO_T				*tp = (GMAC_INFO_T *)dev->priv;
-+	GMAC_DMA_CTRL_T			dma_ctrl, dma_ctrl_mask;
-+	GMAC_TXDMA_FIRST_DESC_T	txdma_busy;
-+
-+	// wait idle
-+	do
-+	{
-+		txdma_busy.bits32 = gmac_read_reg(tp->dma_base_addr, GMAC_DMA_TX_FIRST_DESC_REG);
-+	} while (txdma_busy.bits.td_busy);
-+
-+    /* program dma control register */
-+	dma_ctrl.bits32 = 0;
-+	dma_ctrl.bits.rd_enable = 0;
-+	dma_ctrl.bits.td_enable = 0;
-+
-+	dma_ctrl_mask.bits32 = 0;
-+	dma_ctrl_mask.bits.rd_enable = 1;
-+	dma_ctrl_mask.bits.td_enable = 1;
-+
-+	gmac_write_reg(tp->dma_base_addr, GMAC_DMA_CTRL_REG, dma_ctrl.bits32, dma_ctrl_mask.bits32);
-+}
-+
-+/*----------------------------------------------------------------------
-+* mac_start_txdma
-+*----------------------------------------------------------------------*/
-+void mac_start_txdma(struct net_device *dev)
-+{
-+	GMAC_INFO_T			*tp = (GMAC_INFO_T *)dev->priv;
-+	GMAC_DMA_CTRL_T		dma_ctrl, dma_ctrl_mask;
-+
-+    /* program dma control register */
-+	dma_ctrl.bits32 = 0;
-+	dma_ctrl.bits.rd_enable = 1;
-+	dma_ctrl.bits.td_enable = 1;
-+
-+	dma_ctrl_mask.bits32 = 0;
-+	dma_ctrl_mask.bits.rd_enable = 1;
-+	dma_ctrl_mask.bits.td_enable = 1;
-+
-+	gmac_write_reg(tp->dma_base_addr, GMAC_DMA_CTRL_REG, dma_ctrl.bits32, dma_ctrl_mask.bits32);
-+}
-+
-+
-+/*----------------------------------------------------------------------
-+* gmac_get_stats
-+*----------------------------------------------------------------------*/
-+
-+struct net_device_stats * gmac_get_stats(struct net_device *dev)
-+{
-+    GMAC_INFO_T *tp = (GMAC_INFO_T *)dev->priv;
-+    // unsigned int        flags;
-+    unsigned int        pkt_drop;
-+    unsigned int        pkt_error;
-+
-+    if (netif_running(dev))
-+    {
-+        /* read H/W counter */
-+        // spin_lock_irqsave(&tp->lock,flags);
-+        pkt_drop = gmac_read_reg(tp->base_addr,GMAC_IN_DISCARDS);
-+        pkt_error = gmac_read_reg(tp->base_addr,GMAC_IN_ERRORS);
-+        tp->ifStatics.rx_dropped = tp->ifStatics.rx_dropped + pkt_drop;
-+        tp->ifStatics.rx_errors = tp->ifStatics.rx_errors + pkt_error;
-+        // spin_unlock_irqrestore(&tp->lock,flags);
-+    }
-+    return &tp->ifStatics;
-+}
-+
-+
-+
-+/*----------------------------------------------------------------------
-+* mac_get_sw_tx_weight
-+*----------------------------------------------------------------------*/
-+void mac_get_sw_tx_weight(struct net_device *dev, char *weight)
-+{
-+	GMAC_TX_WCR1_T	sw_weigh;
-+    GMAC_INFO_T		*tp = (GMAC_INFO_T *)dev->priv;
-+
-+	sw_weigh.bits32 = gmac_read_reg(tp->dma_base_addr, GMAC_TX_WEIGHTING_CTRL_1_REG);
-+
-+	weight[0] = sw_weigh.bits.sw_tq0;
-+   	weight[1] = sw_weigh.bits.sw_tq1;
-+   	weight[2] = sw_weigh.bits.sw_tq2;
-+   	weight[3] = sw_weigh.bits.sw_tq3;
-+   	weight[4] = sw_weigh.bits.sw_tq4;
-+   	weight[5] = sw_weigh.bits.sw_tq5;
-+}
-+
-+/*----------------------------------------------------------------------
-+* mac_set_sw_tx_weight
-+*----------------------------------------------------------------------*/
-+void mac_set_sw_tx_weight(struct net_device *dev, char *weight)
-+{
-+	GMAC_TX_WCR1_T	sw_weigh;
-+    GMAC_INFO_T		*tp = (GMAC_INFO_T *)dev->priv;
-+
-+	sw_weigh.bits32 = 0;
-+	sw_weigh.bits.sw_tq0 = weight[0];
-+   	sw_weigh.bits.sw_tq1 = weight[1];
-+   	sw_weigh.bits.sw_tq2 = weight[2];
-+   	sw_weigh.bits.sw_tq3 = weight[3];
-+   	sw_weigh.bits.sw_tq4 = weight[4];
-+   	sw_weigh.bits.sw_tq5 = weight[5];
-+
-+	gmac_write_reg(tp->dma_base_addr, GMAC_TX_WEIGHTING_CTRL_1_REG, sw_weigh.bits32, 0xffffffff);
-+}
-+
-+/*----------------------------------------------------------------------
-+* mac_get_hw_tx_weight
-+*----------------------------------------------------------------------*/
-+void mac_get_hw_tx_weight(struct net_device *dev, char *weight)
-+{
-+	GMAC_TX_WCR0_T	hw_weigh;
-+    GMAC_INFO_T		*tp = (GMAC_INFO_T *)dev->priv;
-+
-+	hw_weigh.bits32 = gmac_read_reg(tp->dma_base_addr, GMAC_TX_WEIGHTING_CTRL_0_REG);
-+
-+	weight[0] = hw_weigh.bits.hw_tq0;
-+   	weight[1] = hw_weigh.bits.hw_tq1;
-+   	weight[2] = hw_weigh.bits.hw_tq2;
-+   	weight[3] = hw_weigh.bits.hw_tq3;
-+}
-+
-+/*----------------------------------------------------------------------
-+* mac_set_hw_tx_weight
-+*----------------------------------------------------------------------*/
-+void mac_set_hw_tx_weight(struct net_device *dev, char *weight)
-+{
-+	GMAC_TX_WCR0_T	hw_weigh;
-+    GMAC_INFO_T		*tp = (GMAC_INFO_T *)dev->priv;
-+
-+	hw_weigh.bits32 = 0;
-+	hw_weigh.bits.hw_tq0 = weight[0];
-+   	hw_weigh.bits.hw_tq1 = weight[1];
-+   	hw_weigh.bits.hw_tq2 = weight[2];
-+   	hw_weigh.bits.hw_tq3 = weight[3];
-+
-+	gmac_write_reg(tp->dma_base_addr, GMAC_TX_WEIGHTING_CTRL_0_REG, hw_weigh.bits32, 0xffffffff);
-+}
-+
-+/*----------------------------------------------------------------------
-+* mac_start_tx_dma
-+*----------------------------------------------------------------------*/
-+int mac_start_tx_dma(int mac)
-+{
-+	GMAC_DMA_CTRL_T dma_ctrl, dma_ctrl_mask;
-+
-+	dma_ctrl.bits32 = 0;
-+	dma_ctrl.bits.td_enable = 1;
-+
-+	dma_ctrl_mask.bits32 = 0;
-+	dma_ctrl_mask.bits.td_enable = 1;
-+
-+	if (mac == 0)
-+    	gmac_write_reg(TOE_GMAC0_DMA_BASE, GMAC_DMA_CTRL_REG, dma_ctrl.bits32, dma_ctrl_mask.bits32);
-+	else
-+    	gmac_write_reg(TOE_GMAC1_DMA_BASE, GMAC_DMA_CTRL_REG, dma_ctrl.bits32, dma_ctrl_mask.bits32);
-+	return	1;
-+}
-+
-+/*----------------------------------------------------------------------
-+* mac_stop_tx_dma
-+*----------------------------------------------------------------------*/
-+int mac_stop_tx_dma(int mac)
-+{
-+	GMAC_DMA_CTRL_T dma_ctrl, dma_ctrl_mask;
-+
-+	dma_ctrl.bits32 = 0;
-+	dma_ctrl.bits.td_enable = 0;
-+
-+	dma_ctrl_mask.bits32 = 0;
-+	dma_ctrl_mask.bits.td_enable = 1;
-+
-+	if (mac == 0)
-+    	gmac_write_reg(TOE_GMAC0_DMA_BASE, GMAC_DMA_CTRL_REG, dma_ctrl.bits32, dma_ctrl_mask.bits32);
-+	else
-+    	gmac_write_reg(TOE_GMAC1_DMA_BASE, GMAC_DMA_CTRL_REG, dma_ctrl.bits32, dma_ctrl_mask.bits32);
-+	return	1;
-+}
-+
-+/*----------------------------------------------------------------------
-+* mac_read_reg(int mac, unsigned int offset)
-+*----------------------------------------------------------------------*/
-+unsigned int mac_read_reg(int mac, unsigned int offset)
-+{
-+	switch (mac)
-+	{
-+		case 0:
-+			return gmac_read_reg(TOE_GMAC0_BASE, offset);
-+		case 1:
-+			return gmac_read_reg(TOE_GMAC1_BASE, offset);
-+		default:
-+			return 0;
-+	}
-+}
-+
-+/*----------------------------------------------------------------------
-+* mac_write_reg
-+*----------------------------------------------------------------------*/
-+void mac_write_reg(int mac, unsigned int offset, unsigned data)
-+{
-+	switch (mac)
-+	{
-+		case 0:
-+			gmac_write_reg(GMAC0_BASE, offset, data, 0xffffffff);
-+			break;
-+		case 1:
-+			gmac_write_reg(GMAC1_BASE, offset, data, 0xffffffff);
-+			break;
-+	}
-+}
-+
-+/*----------------------------------------------------------------------
-+* mac_read_dma_reg(int mac, unsigned int offset)
-+*----------------------------------------------------------------------*/
-+u32 mac_read_dma_reg(int mac, unsigned int offset)
-+{
-+	switch (mac)
-+	{
-+		case 0:
-+			return gmac_read_reg(TOE_GMAC0_DMA_BASE, offset);
-+		case 1:
-+			return gmac_read_reg(TOE_GMAC1_DMA_BASE, offset);
-+		default:
-+			return 0;
-+	}
-+}
-+
-+/*----------------------------------------------------------------------
-+* mac_write_dma_reg
-+*----------------------------------------------------------------------*/
-+void mac_write_dma_reg(int mac, unsigned int offset, u32 data)
-+{
-+	switch (mac)
-+	{
-+		case 0:
-+			gmac_write_reg(TOE_GMAC0_DMA_BASE, offset, data, 0xffffffff);
-+			break;
-+		case 1:
-+			gmac_write_reg(TOE_GMAC1_DMA_BASE, offset, data, 0xffffffff);
-+			break;
-+	}
-+}
-+
-+/*----------------------------------------------------------------------
-+* ether_crc
-+*----------------------------------------------------------------------*/
-+static unsigned const ethernet_polynomial = 0x04c11db7U;
-+static unsigned int ether_crc (int length, unsigned char *data)
-+{
-+	int crc = -1;
-+	unsigned int i;
-+	unsigned int crc_val=0;
-+
-+	while (--length >= 0) {
-+		unsigned char current_octet = *data++;
-+		int bit;
-+		for (bit = 0; bit < 8; bit++, current_octet >>= 1)
-+			crc = (crc << 1) ^ ((crc < 0) ^ (current_octet & 1) ?
-+			     ethernet_polynomial : 0);
-+	}
-+	crc = ~crc;
-+	for (i=0;i<32;i++)
-+	{
-+		crc_val = crc_val + (((crc << i) & 0x80000000) >> (31-i));
-+	}
-+	return crc_val;
-+}
-+
-+
-+
-+/*----------------------------------------------------------------------
-+* mac_set_rx_mode
-+*----------------------------------------------------------------------*/
-+void mac_set_rx_mode(int pid, unsigned int data)
-+{
-+	unsigned int	base;
-+
-+	base = (pid == 0) ? GMAC0_BASE : GMAC1_BASE;
-+
-+    gmac_write_reg(base, GMAC_RX_FLTR, data, 0x0000001f);
-+    return;
-+}
-+
-+
-+/*----------------------------------------------------------------------
-+* gmac_open
-+*----------------------------------------------------------------------*/
-+
-+static int gmac_open (struct net_device *dev)
-+{
-+	GMAC_INFO_T  *tp = (GMAC_INFO_T *)dev->priv;
-+	int    					retval;
-+	TOE_INFO_T				*toe;
-+	toe = (TOE_INFO_T *)&toe_private_data;
-+
-+    /* hook ISR */
-+	retval = request_irq (dev->irq, toe_gmac_interrupt, IRQF_DISABLED, dev->name, dev);
-+	if (retval)
-+		return retval;
-+
-+	toe_init_gmac(dev);
-+
-+	if(!FLAG_SWITCH)
-+	{
-+    	init_waitqueue_head (&tp->thr_wait);
-+    	init_completion(&tp->thr_exited);
-+
-+    	tp->time_to_die = 0;
-+    	tp->thr_pid = kernel_thread (gmac_phy_thread, dev, CLONE_FS | CLONE_FILES);
-+    	if (tp->thr_pid < 0)
-+    	{
-+    		printk (KERN_WARNING "%s: unable to start kernel thread\n",dev->name);
-+    	}
-+    }
-+
-+	tp->operation = 1;
-+
-+   	netif_start_queue (dev);
-+
-+	return (0);
-+}
-+
-+/*----------------------------------------------------------------------
-+* gmac_close
-+*----------------------------------------------------------------------*/
-+static int gmac_close(struct net_device *dev)
-+{
-+    TOE_INFO_T			*toe;
-+// 	GMAC_RXDESC_T		*sw_desc_ptr,*desc_ptr;
-+// 	unsigned int		buf_ptr;
-+	GMAC_INFO_T 	*tp = dev->priv;
-+	unsigned int		ret;
-+
-+	toe = (TOE_INFO_T *)&toe_private_data;
-+
-+	tp->operation = 0;
-+
-+    netif_stop_queue(dev);
-+    mdelay(20);
-+
-+    /* stop tx/rx packet */
-+    toe_gmac_disable_tx_rx(dev);
-+    mdelay(20);
-+
-+    /* stop the chip's Tx and Rx DMA processes */
-+	toe_gmac_hw_stop(dev);
-+
-+	toe_gmac_disable_interrupt(tp->irq);
-+
-+    /* disable interrupts by clearing the interrupt mask */
-+    synchronize_irq();
-+    free_irq(dev->irq,dev);
-+
-+//	DMA_MFREE(sw_desc_ptr, (TOE_SW_FREEQ_DESC_NUM * sizeof(GMAC_RXDESC_T),(dma_addr_t *)&toe->sw_freeq_desc_base_dma);
-+//	DMA_MFREE(desc_ptr, TOE_HW_FREEQ_DESC_NUM * sizeof(GMAC_RXDESC_T),(dma_addr_t *)&toe->hw_freeq_desc_base_dma);
-+//	DMA_MFREE(buf_ptr, TOE_HW_FREEQ_DESC_NUM) * HW_RX_BUF_SIZE),(dma_addr_t *)&toe->hwfq_buf_base_dma);
-+//	DMA_MFREE(toe->gmac[0].swtxq_desc_base , TOE_GMAC0_SWTXQ_DESC_NUM * TOE_SW_TXQ_NUM * sizeof(GMAC_TXDESC_T),(dma_addr_t *)&toe->gmac[0].swtxq_desc_base_dma);
-+//	DMA_MFREE(toe->gmac[1].swtxq_desc_base , TOE_GMAC0_SWTXQ_DESC_NUM * TOE_SW_TXQ_NUM * sizeof(GMAC_TXDESC_T),(dma_addr_t *)&toe->gmac[1].swtxq_desc_base_dma);
-+//	DMA_MFREE(toe->gmac[0].hwtxq_desc_base_dma , TOE_GMAC0_HWTXQ_DESC_NUM * TOE_HW_TXQ_NUM * sizeof(GMAC_TXDESC_T),(dma_addr_t *)&toe->gmac[0].hwtxq_desc_base_dma);
-+//	DMA_MFREE(toe->gmac[1].hwtxq_desc_base_dma , TOE_GMAC0_SWTXQ_DESC_NUM * TOE_HW_TXQ_NUM * sizeof(GMAC_TXDESC_T),(dma_addr_t *)&toe->gmac[1].hwtxq_desc_base_dma);
-+//	DMA_MFREE(toe->gmac[0].default_desc_base_dma ,TOE_DEFAULT_Q0_DESC_NUM * sizeof(GMAC_TXDESC_T),(dma_addr_t *)&toe->gmac[0].default_desc_base_dma);
-+//	DMA_MFREE(toe->gmac[1].default_desc_base_dma , TOE_DEFAULT_Q0_DESC_NUM * sizeof(GMAC_TXDESC_T),(dma_addr_t *)&toe->gmac[1].default_desc_base_dma);
-+//	DMA_MFREE(toe->intr_desc_base_dma , TOE_INTR_QUEUE_NUM * TOE_INTR_DESC_NUM * sizeof(GMAC_RXDESC_T),(dma_addr_t *)&toe->intr_desc_base_dma);
-+//	DMA_MFREE(toe->intr_buf_base_dma , TOE_INTR_DESC_NUM * sizeof(TOE_QHDR_T),(dma_addr_t *)&toe->intr_buf_base_dma);
-+
-+	if(!FLAG_SWITCH)
-+	{
-+    	if (tp->thr_pid >= 0)
-+    	{
-+		    tp->time_to_die = 1;
-+    		wmb();
-+    		ret = kill_proc (tp->thr_pid, SIGTERM, 1);
-+    		if (ret)
-+    		{
-+    			printk (KERN_ERR "%s: unable to signal thread\n", dev->name);
-+    			return ret;
-+    		}
-+//    		wait_for_completion (&tp->thr_exited);
-+    	}
-+    }
-+
-+    return (0);
-+}
-+
-+/*----------------------------------------------------------------------
-+* toe_gmac_fill_free_q
-+* allocate buffers for free queue.
-+*----------------------------------------------------------------------*/
-+static inline void toe_gmac_fill_free_q(void)
-+{
-+	struct sk_buff	*skb;
-+	volatile DMA_RWPTR_T	fq_rwptr;
-+	volatile GMAC_RXDESC_T	*fq_desc;
-+	unsigned long	flags;
-+	// unsigned short max_cnt=TOE_SW_FREEQ_DESC_NUM>>1;
-+
-+	fq_rwptr.bits32 = readl(TOE_GLOBAL_BASE + GLOBAL_SWFQ_RWPTR_REG);
-+	spin_lock_irqsave(&gmac_fq_lock, flags);
-+	//while ((max_cnt--) && (unsigned short)RWPTR_ADVANCE_ONE(fq_rwptr.bits.wptr,
-+	//				TOE_SW_FREEQ_DESC_NUM) != fq_rwptr.bits.rptr) {
-+	while ((unsigned short)RWPTR_ADVANCE_ONE(fq_rwptr.bits.wptr,
-+					TOE_SW_FREEQ_DESC_NUM) != fq_rwptr.bits.rptr) {
-+		if ((skb = dev_alloc_skb(SW_RX_BUF_SIZE)) == NULL) {
-+			printk("%s::skb allocation fail!\n", __func__);
-+			//while(1);
-+			break;
-+		}
-+		REG32(skb->data) = (unsigned int)skb;
-+		skb_reserve(skb, SKB_RESERVE_BYTES);
-+		// fq_rwptr.bits32 = readl(TOE_GLOBAL_BASE + GLOBAL_SWFQ_RWPTR_REG);
-+		fq_rwptr.bits.wptr = RWPTR_ADVANCE_ONE(fq_rwptr.bits.wptr,
-+			TOE_SW_FREEQ_DESC_NUM);
-+		fq_desc = (GMAC_RXDESC_T*)toe_private_data.swfq_desc_base+fq_rwptr.bits.wptr;
-+		fq_desc->word2.buf_adr = (unsigned int)__pa(skb->data);
-+		SET_WPTR(TOE_GLOBAL_BASE+GLOBAL_SWFQ_RWPTR_REG, fq_rwptr.bits.wptr);
-+		toe_private_data.fq_rx_rwptr.bits32 = fq_rwptr.bits32;
-+	}
-+	spin_unlock_irqrestore(&gmac_fq_lock, flags);
-+}
-+// EXPORT_SYMBOL(toe_gmac_fill_free_q);
-+
-+/*----------------------------------------------------------------------
-+* toe_gmac_interrupt
-+*----------------------------------------------------------------------*/
-+static irqreturn_t toe_gmac_interrupt (int irq, void *dev_instance)
-+{
-+	struct net_device   *dev = (struct net_device *)dev_instance;
-+	TOE_INFO_T			*toe;
-+	GMAC_INFO_T 		*tp = (GMAC_INFO_T *)dev->priv;
-+	unsigned int		status0;
-+	unsigned int		status1;
-+	unsigned int		status2;
-+	unsigned int		status3;
-+	unsigned int		status4;
-+
-+//	struct net_device_stats *isPtr = (struct net_device_stats *)&tp->ifStatics;
-+	toe = (TOE_INFO_T *)&toe_private_data;
-+//	handle NAPI
-+#ifdef CONFIG_SL_NAPI
-+if (storlink_ctl.pauseoff == 1)
-+{
-+/* disable GMAC interrupt */
-+    //toe_gmac_disable_interrupt(tp->irq);
-+
-+//	isPtr->interrupts++;
-+	/* read Interrupt status */
-+	status0 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_STATUS_0_REG);
-+	status1 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_STATUS_1_REG);
-+	status2 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_STATUS_2_REG);
-+	status3 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_STATUS_3_REG);
-+	status4 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_STATUS_4_REG);
-+	// prompt warning if status bit ON but not enabled
-+#if 0
-+	if (status0 & ~tp->intr0_enabled)
-+		printk("Intr 0 Status error. status = 0x%X, enable = 0x%X\n",
-+				status0, tp->intr0_enabled);
-+	if (status1 & ~tp->intr1_enabled)
-+		printk("Intr 1 Status error. status = 0x%X, enable = 0x%X\n",
-+				status1, tp->intr1_enabled);
-+	if (status2 & ~tp->intr2_enabled)
-+		printk("Intr 2 Status error. status = 0x%X, enable = 0x%X\n",
-+				status2, tp->intr2_enabled);
-+	if (status3 & ~tp->intr3_enabled)
-+		printk("Intr 3 Status error. status = 0x%X, enable = 0x%X\n",
-+				status3, tp->intr3_enabled);
-+	if (status4 & ~tp->intr4_enabled)
-+		printk("Intr 4 Status error. status = 0x%X, enable = 0x%X\n",
-+				status4, tp->intr4_enabled);
-+#endif
-+
-+	if (status0)
-+		writel(status0 & tp->intr0_enabled, TOE_GLOBAL_BASE+GLOBAL_INTERRUPT_STATUS_0_REG);
-+	if (status1)
-+		writel(status1 & tp->intr1_enabled, TOE_GLOBAL_BASE+GLOBAL_INTERRUPT_STATUS_1_REG);
-+	if (status2)
-+		writel(status2 & tp->intr2_enabled, TOE_GLOBAL_BASE+GLOBAL_INTERRUPT_STATUS_2_REG);
-+	if (status3)
-+		writel(status3 & tp->intr3_enabled, TOE_GLOBAL_BASE+GLOBAL_INTERRUPT_STATUS_3_REG);
-+	if (status4)
-+		writel(status4 & tp->intr4_enabled, TOE_GLOBAL_BASE+GLOBAL_INTERRUPT_STATUS_4_REG);
-+#if 0
-+	/* handle freeq interrupt first */
-+	if (status4 & tp->intr4_enabled) {
-+		if ((status4 & SWFQ_EMPTY_INT_BIT) && (tp->intr4_enabled & SWFQ_EMPTY_INT_BIT))
-+		{
-+			// unsigned long data = REG32(TOE_GLOBAL_BASE + GLOBAL_SWFQ_RWPTR_REG);
-+			//gmac_write_reg(TOE_GLOBAL_BASE, GLOBAL_INTERRUPT_ENABLE_4_REG,
-+			//	tp->intr4_enabled & ~SWFQ_EMPTY_INT_BIT, SWFQ_EMPTY_INT_BIT);
-+
-+			if (toe->gmac[0].dev && netif_running(toe->gmac[0].dev))
-+				toe_gmac_handle_default_rxq(toe->gmac[0].dev,&toe->gmac[0]);
-+			if (toe->gmac[1].dev && netif_running(toe->gmac[1].dev))
-+				toe_gmac_handle_default_rxq(toe->gmac[1].dev,&toe->gmac[1]);
-+			printk("\nfreeq int\n");
-+			toe_gmac_fill_free_q();
-+			tp->sw_fq_empty_cnt++;
-+
-+		}
-+	}
-+#endif
-+	// Interrupt Status 1
-+	if (status1 & tp->intr1_enabled)
-+	{
-+		#define G1_INTR0_BITS	(GMAC1_HWTQ13_EOF_INT_BIT | GMAC1_HWTQ12_EOF_INT_BIT | GMAC1_HWTQ11_EOF_INT_BIT | GMAC1_HWTQ10_EOF_INT_BIT)
-+		#define G0_INTR0_BITS	(GMAC0_HWTQ03_EOF_INT_BIT | GMAC0_HWTQ02_EOF_INT_BIT | GMAC0_HWTQ01_EOF_INT_BIT | GMAC0_HWTQ00_EOF_INT_BIT)
-+		// Handle GMAC 0/1 HW Tx queue 0-3 EOF events
-+		// Only count
-+		// TOE, Classification, and default queues interrupts are handled by ISR
-+		// because they should pass packets to upper layer
-+		if (tp->port_id == 0)
-+		{
-+			if (netif_running(dev) && (status1 & G0_INTR0_BITS) && (tp->intr1_enabled & G0_INTR0_BITS))
-+			{
-+				if (status1 & GMAC0_HWTQ03_EOF_INT_BIT)
-+					tp->hwtxq[3].eof_cnt++;
-+				if (status1 & GMAC0_HWTQ02_EOF_INT_BIT)
-+					tp->hwtxq[2].eof_cnt++;
-+				if (status1 & GMAC0_HWTQ01_EOF_INT_BIT)
-+					tp->hwtxq[1].eof_cnt++;
-+				if (status1 & GMAC0_HWTQ00_EOF_INT_BIT)
-+					tp->hwtxq[0].eof_cnt++;
-+			}
-+				if (netif_running(dev) && (status1 & DEFAULT_Q0_INT_BIT) && (tp->intr1_enabled & DEFAULT_Q0_INT_BIT))
-+				{
-+					if (likely(netif_rx_schedule_prep(dev)))
-+        			{
-+        				unsigned int data32;
-+        				// disable GMAC-0 rx interrupt
-+        				// class-Q & TOE-Q are implemented in future
-+        				//data32 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_1_REG);
-+        				//data32 &= ~DEFAULT_Q0_INT_BIT;
-+						//writel(data32, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_1_REG);
-+						//printk("\%s: DEFAULT_Q0_INT_BIT===================>>>>>>>>>>>>\n",__func__);
-+						writel(0x0, TOE_GLOBAL_BASE+GLOBAL_INTERRUPT_ENABLE_1_REG);
-+						//tp->total_q_cnt_napi=0;
-+						//rx_time = jiffies;
-+						//rx_old_bytes = isPtr->rx_bytes;
-+            			__netif_rx_schedule(dev);
-+        			}
-+			}
-+		}
-+		else if (tp->port_id == 1)
-+		{
-+			if (netif_running(dev) && (status1 & G1_INTR0_BITS) && (tp->intr1_enabled & G1_INTR0_BITS))
-+			{
-+				if (status1 & GMAC1_HWTQ13_EOF_INT_BIT)
-+					tp->hwtxq[3].eof_cnt++;
-+				if (status1 & GMAC1_HWTQ12_EOF_INT_BIT)
-+					tp->hwtxq[2].eof_cnt++;
-+				if (status1 & GMAC1_HWTQ11_EOF_INT_BIT)
-+					tp->hwtxq[1].eof_cnt++;
-+				if (status1 & GMAC1_HWTQ10_EOF_INT_BIT)
-+					tp->hwtxq[0].eof_cnt++;
-+			}
-+
-+			if (netif_running(dev) && (status1 & DEFAULT_Q1_INT_BIT) && (tp->intr1_enabled & DEFAULT_Q1_INT_BIT))
-+			{
-+				if (likely(netif_rx_schedule_prep(dev)))
-+        		{
-+        			unsigned int data32;
-+         			// disable GMAC-0 rx interrupt
-+        			// class-Q & TOE-Q are implemented in future
-+        			//data32 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_1_REG);
-+        			//data32 &= ~DEFAULT_Q1_INT_BIT;
-+					//writel(data32, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_1_REG);
-+					//printk("\%s: 1111111111--->DEFAULT_Q1_INT_BIT===================>>>>>>>>>>>>\n",__func__);
-+					writel(0x0, TOE_GLOBAL_BASE+GLOBAL_INTERRUPT_ENABLE_1_REG);
-+					//tp->total_q_cnt_napi=0;
-+					//rx_time = jiffies;
-+					//rx_old_bytes = isPtr->rx_bytes;
-+           			__netif_rx_schedule(dev);
-+        		}
-+			}
-+		}
-+	}
-+
-+	// Interrupt Status 0
-+	if (status0 & tp->intr0_enabled)
-+	{
-+		#define ERR_INTR_BITS	(GMAC0_TXDERR_INT_BIT | GMAC0_TXPERR_INT_BIT |	\
-+								 GMAC1_TXDERR_INT_BIT | GMAC1_TXPERR_INT_BIT |	\
-+								 GMAC0_RXDERR_INT_BIT | GMAC0_RXPERR_INT_BIT |	\
-+								 GMAC1_RXDERR_INT_BIT | GMAC1_RXPERR_INT_BIT)
-+
-+		if (status0 &  ERR_INTR_BITS)
-+		{
-+			if ((status0 & GMAC0_TXDERR_INT_BIT) && (tp->intr0_enabled & GMAC0_TXDERR_INT_BIT))
-+			{
-+				tp->txDerr_cnt[0]++;
-+				printk("GMAC0 TX AHB Bus Error!\n");
-+			}
-+			if ((status0 & GMAC0_TXPERR_INT_BIT) && (tp->intr0_enabled & GMAC0_TXPERR_INT_BIT))
-+			{
-+				tp->txPerr_cnt[0]++;
-+				printk("GMAC0 Tx Descriptor Protocol Error!\n");
-+			}
-+			if ((status0 & GMAC1_TXDERR_INT_BIT) && (tp->intr0_enabled & GMAC1_TXDERR_INT_BIT))
-+			{
-+				tp->txDerr_cnt[1]++;
-+				printk("GMAC1 Tx AHB Bus Error!\n");
-+			}
-+			if ((status0 & GMAC1_TXPERR_INT_BIT) && (tp->intr0_enabled & GMAC1_TXPERR_INT_BIT))
-+			{
-+				tp->txPerr_cnt[1]++;
-+				printk("GMAC1 Tx Descriptor Protocol Error!\n");
-+			}
-+
-+			if ((status0 & GMAC0_RXDERR_INT_BIT) && (tp->intr0_enabled & GMAC0_RXDERR_INT_BIT))
-+			{
-+				tp->RxDerr_cnt[0]++;
-+				printk("GMAC0 Rx AHB Bus Error!\n");
-+			}
-+			if ((status0 & GMAC0_RXPERR_INT_BIT) && (tp->intr0_enabled & GMAC0_RXPERR_INT_BIT))
-+			{
-+				tp->RxPerr_cnt[0]++;
-+				printk("GMAC0 Rx Descriptor Protocol Error!\n");
-+			}
-+			if ((status0 & GMAC1_RXDERR_INT_BIT) && (tp->intr0_enabled & GMAC1_RXDERR_INT_BIT))
-+			{
-+				tp->RxDerr_cnt[1]++;
-+				printk("GMAC1 Rx AHB Bus Error!\n");
-+			}
-+			if ((status0 & GMAC1_RXPERR_INT_BIT) && (tp->intr0_enabled & GMAC1_RXPERR_INT_BIT))
-+			{
-+				tp->RxPerr_cnt[1]++;
-+				printk("GMAC1 Rx Descriptor Protocol Error!\n");
-+			}
-+		}
-+
-+#ifndef	GMAX_TX_INTR_DISABLED
-+		if (tp->port_id == 1 &&	netif_running(dev) &&
-+			(((status0 & GMAC1_SWTQ10_FIN_INT_BIT) && (tp->intr0_enabled & GMAC1_SWTQ10_FIN_INT_BIT))
-+			||
-+			((status0 & GMAC1_SWTQ10_EOF_INT_BIT) && (tp->intr0_enabled & GMAC1_SWTQ10_EOF_INT_BIT))))
-+		{
-+			toe_gmac_tx_complete(&toe_private_data.gmac[1], 0, dev, 1);
-+		}
-+
-+		if (tp->port_id == 0 &&	netif_running(dev) &&
-+			(((status0 & GMAC0_SWTQ00_FIN_INT_BIT) && (tp->intr0_enabled & GMAC0_SWTQ00_FIN_INT_BIT))
-+			||
-+			((status0 & GMAC0_SWTQ00_EOF_INT_BIT) && (tp->intr0_enabled & GMAC0_SWTQ00_EOF_INT_BIT))))
-+		{
-+			toe_gmac_tx_complete(&toe_private_data.gmac[0], 0, dev, 1);
-+		}
-+#endif
-+	}
-+	// Interrupt Status 4
-+	if (status4 & tp->intr4_enabled)
-+	{
-+		#define G1_INTR4_BITS		(0xff000000)
-+		#define G0_INTR4_BITS		(0x00ff0000)
-+
-+		if (tp->port_id == 0)
-+		{
-+			if ((status4 & G0_INTR4_BITS) && (tp->intr4_enabled & G0_INTR4_BITS))
-+			{
-+				if (status4 & GMAC0_RESERVED_INT_BIT)
-+					printk("GMAC0_RESERVED_INT_BIT is ON\n");
-+				if (status4 & GMAC0_MIB_INT_BIT)
-+					tp->mib_full_cnt++;
-+				if (status4 & GMAC0_RX_PAUSE_ON_INT_BIT)
-+					tp->rx_pause_on_cnt++;
-+				if (status4 & GMAC0_TX_PAUSE_ON_INT_BIT)
-+					tp->tx_pause_on_cnt++;
-+				if (status4 & GMAC0_RX_PAUSE_OFF_INT_BIT)
-+					tp->rx_pause_off_cnt++;
-+				if (status4 & GMAC0_TX_PAUSE_OFF_INT_BIT)
-+					tp->rx_pause_off_cnt++;
-+				if (status4 & GMAC0_RX_OVERRUN_INT_BIT)
-+					tp->rx_overrun_cnt++;
-+				if (status4 & GMAC0_STATUS_CHANGE_INT_BIT)
-+					tp->status_changed_cnt++;
-+			}
-+		}
-+		else if (tp->port_id == 1)
-+		{
-+			if ((status4 & G1_INTR4_BITS) && (tp->intr4_enabled & G1_INTR4_BITS))
-+			{
-+				if (status4 & GMAC1_RESERVED_INT_BIT)
-+					printk("GMAC1_RESERVED_INT_BIT is ON\n");
-+				if (status4 & GMAC1_MIB_INT_BIT)
-+					tp->mib_full_cnt++;
-+				if (status4 & GMAC1_RX_PAUSE_ON_INT_BIT)
-+				{
-+					printk("Gmac pause on\n");
-+					tp->rx_pause_on_cnt++;
-+				}
-+				if (status4 & GMAC1_TX_PAUSE_ON_INT_BIT)
-+				{
-+					printk("Gmac pause on\n");
-+					tp->tx_pause_on_cnt++;
-+				}
-+				if (status4 & GMAC1_RX_PAUSE_OFF_INT_BIT)
-+				{
-+					printk("Gmac pause off\n");
-+					tp->rx_pause_off_cnt++;
-+				}
-+				if (status4 & GMAC1_TX_PAUSE_OFF_INT_BIT)
-+				{
-+					printk("Gmac pause off\n");
-+					tp->rx_pause_off_cnt++;
-+				}
-+				if (status4 & GMAC1_RX_OVERRUN_INT_BIT)
-+				{
-+					//printk("Gmac Rx Overrun \n");
-+					tp->rx_overrun_cnt++;
-+				}
-+				if (status4 & GMAC1_STATUS_CHANGE_INT_BIT)
-+					tp->status_changed_cnt++;
-+			}
-+		}
-+	}
-+
-+	//toe_gmac_enable_interrupt(tp->irq);
-+#ifdef IxscriptMate_1518
-+	if (storlink_ctl.pauseoff == 1)
-+	{
-+		GMAC_CONFIG0_T config0;
-+		config0.bits32 = readl(TOE_GMAC0_BASE+GMAC_CONFIG0);
-+		config0.bits.dis_rx = 0;
-+		writel(config0.bits32, TOE_GMAC0_BASE+GMAC_CONFIG0);
-+		config0.bits32 = readl(TOE_GMAC1_BASE+GMAC_CONFIG0);
-+		config0.bits.dis_rx = 0;
-+		writel(config0.bits32, TOE_GMAC1_BASE+GMAC_CONFIG0);
-+	}
-+#endif
-+//	 enable_irq(gmac_irq[dev_index]);
-+	//printk("gmac_interrupt complete!\n\n");
-+//	return IRQ_RETVAL(handled);
-+	return	IRQ_RETVAL(1);
-+}
-+else
-+{
-+#endif	//endif NAPI
-+
-+
-+	/* disable GMAC interrupt */
-+    toe_gmac_disable_interrupt(tp->irq);
-+
-+//	isPtr->interrupts++;
-+	/* read Interrupt status */
-+	status0 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_STATUS_0_REG);
-+	status1 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_STATUS_1_REG);
-+	status2 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_STATUS_2_REG);
-+	status3 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_STATUS_3_REG);
-+	status4 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_STATUS_4_REG);
-+	// prompt warning if status bit ON but not enabled
-+#if 0
-+	if (status0 & ~tp->intr0_enabled)
-+		printk("Intr 0 Status error. status = 0x%X, enable = 0x%X\n",
-+				status0, tp->intr0_enabled);
-+	if (status1 & ~tp->intr1_enabled)
-+		printk("Intr 1 Status error. status = 0x%X, enable = 0x%X\n",
-+				status1, tp->intr1_enabled);
-+	if (status2 & ~tp->intr2_enabled)
-+		printk("Intr 2 Status error. status = 0x%X, enable = 0x%X\n",
-+				status2, tp->intr2_enabled);
-+	if (status3 & ~tp->intr3_enabled)
-+		printk("Intr 3 Status error. status = 0x%X, enable = 0x%X\n",
-+				status3, tp->intr3_enabled);
-+	if (status4 & ~tp->intr4_enabled)
-+		printk("Intr 4 Status error. status = 0x%X, enable = 0x%X\n",
-+				status4, tp->intr4_enabled);
-+#endif
-+#define	INTERRUPT_SELECT			1
-+	if (status0)
-+		writel(status0 & tp->intr0_enabled, TOE_GLOBAL_BASE+GLOBAL_INTERRUPT_STATUS_0_REG);
-+	if (status1)
-+		writel(status1 & tp->intr1_enabled, TOE_GLOBAL_BASE+GLOBAL_INTERRUPT_STATUS_1_REG);
-+	if (status2)
-+		writel(status2 & tp->intr2_enabled, TOE_GLOBAL_BASE+GLOBAL_INTERRUPT_STATUS_2_REG);
-+	if (status3)
-+		writel(status3 & tp->intr3_enabled, TOE_GLOBAL_BASE+GLOBAL_INTERRUPT_STATUS_3_REG);
-+	if (status4)
-+		writel(status4 & tp->intr4_enabled, TOE_GLOBAL_BASE+GLOBAL_INTERRUPT_STATUS_4_REG);
-+
-+	/* handle freeq interrupt first */
-+	if (status4 & tp->intr4_enabled) {
-+		if ((status4 & SWFQ_EMPTY_INT_BIT) && (tp->intr4_enabled & SWFQ_EMPTY_INT_BIT))
-+		{
-+			// unsigned long data = REG32(TOE_GLOBAL_BASE + GLOBAL_SWFQ_RWPTR_REG);
-+			//gmac_write_reg(TOE_GLOBAL_BASE, GLOBAL_INTERRUPT_ENABLE_4_REG,
-+			//	tp->intr4_enabled & ~SWFQ_EMPTY_INT_BIT, SWFQ_EMPTY_INT_BIT);
-+
-+			//gmac_write_reg(TOE_GLOBAL_BASE, GLOBAL_INTERRUPT_STATUS_4_REG,
-+			//	SWFQ_EMPTY_INT_BIT, SWFQ_EMPTY_INT_BIT);
-+			if (toe->gmac[0].dev && netif_running(toe->gmac[0].dev))
-+				toe_gmac_handle_default_rxq(toe->gmac[0].dev,&toe->gmac[0]);
-+			if (toe->gmac[1].dev && netif_running(toe->gmac[1].dev))
-+				toe_gmac_handle_default_rxq(toe->gmac[1].dev,&toe->gmac[1]);
-+			printk("\nfreeq int\n");
-+			toe_gmac_fill_free_q();
-+			tp->sw_fq_empty_cnt++;
-+
-+			gmac_write_reg(TOE_GLOBAL_BASE, GLOBAL_INTERRUPT_STATUS_4_REG, status4,
-+				SWFQ_EMPTY_INT_BIT);
-+		}
-+	}
-+
-+	// Interrupt Status 1
-+	if (status1 & tp->intr1_enabled)
-+	{
-+		#define G1_INTR0_BITS	(GMAC1_HWTQ13_EOF_INT_BIT | GMAC1_HWTQ12_EOF_INT_BIT | GMAC1_HWTQ11_EOF_INT_BIT | GMAC1_HWTQ10_EOF_INT_BIT)
-+		#define G0_INTR0_BITS	(GMAC0_HWTQ03_EOF_INT_BIT | GMAC0_HWTQ02_EOF_INT_BIT | GMAC0_HWTQ01_EOF_INT_BIT | GMAC0_HWTQ00_EOF_INT_BIT)
-+		// Handle GMAC 0/1 HW Tx queue 0-3 EOF events
-+		// Only count
-+		// TOE, Classification, and default queues interrupts are handled by ISR
-+		// because they should pass packets to upper layer
-+		if (tp->port_id == 0)
-+		{
-+#ifndef	INTERRUPT_SELECT
-+			if (netif_running(dev) && (status1 & G0_INTR0_BITS) && (tp->intr1_enabled & G0_INTR0_BITS))
-+			{
-+				if (status1 & GMAC0_HWTQ03_EOF_INT_BIT)
-+					tp->hwtxq[3].eof_cnt++;
-+				if (status1 & GMAC0_HWTQ02_EOF_INT_BIT)
-+					tp->hwtxq[2].eof_cnt++;
-+				if (status1 & GMAC0_HWTQ01_EOF_INT_BIT)
-+					tp->hwtxq[1].eof_cnt++;
-+				if (status1 & GMAC0_HWTQ00_EOF_INT_BIT)
-+					tp->hwtxq[0].eof_cnt++;
-+#endif	//INTERRUPT_SELECT
-+#ifndef	INTERRUPT_SELECT
-+			}
-+#endif	//INTERRUPT_SELECT
-+			if (netif_running(dev) && (status1 & DEFAULT_Q0_INT_BIT) && (tp->intr1_enabled & DEFAULT_Q0_INT_BIT))
-+			{
-+				tp->default_q_intr_cnt++;
-+				toe_gmac_handle_default_rxq(dev, tp);
-+			}
-+#ifdef CONFIG_SL351x_RXTOE
-+			if (netif_running(dev) && (status1 & TOE_IQ_ALL_BITS) &&
-+			    (tp->intr1_enabled & TOE_IQ_ALL_BITS)) {
-+				//printk("status %x, bits %x, slct %x\n", status1, TOE_IQ_ALL_BITS, tp->intr1_selected);
-+				toe_gmac_handle_toeq(dev, tp, status1);
-+				//toe_gmac_handle_toeq(dev, toe, tp, status1);
-+			}
-+#endif
-+		}
-+		else if (tp->port_id == 1)
-+		{
-+#ifndef	INTERRUPT_SELECT
-+			if (netif_running(dev) && (status1 & G1_INTR0_BITS) && (tp->intr1_enabled & G1_INTR0_BITS))
-+			{
-+				if (status1 & GMAC1_HWTQ13_EOF_INT_BIT)
-+					tp->hwtxq[3].eof_cnt++;
-+				if (status1 & GMAC1_HWTQ12_EOF_INT_BIT)
-+					tp->hwtxq[2].eof_cnt++;
-+				if (status1 & GMAC1_HWTQ11_EOF_INT_BIT)
-+					tp->hwtxq[1].eof_cnt++;
-+				if (status1 & GMAC1_HWTQ10_EOF_INT_BIT)
-+					tp->hwtxq[0].eof_cnt++;
-+#endif	//INTERRUPT_SELECT
-+#ifndef	INTERRUPT_SELECT
-+			}
-+#endif	//INTERRUPT_SELECT
-+			if (netif_running(dev) && (status1 & DEFAULT_Q1_INT_BIT) && (tp->intr1_enabled & DEFAULT_Q1_INT_BIT))
-+			{
-+				tp->default_q_intr_cnt++;
-+				toe_gmac_handle_default_rxq(dev, tp);
-+			}
-+#ifdef CONFIG_SL351x_RXTOE
-+			if (netif_running(dev) && (status1 & TOE_IQ_ALL_BITS) &&
-+			    (tp->intr1_enabled & TOE_IQ_ALL_BITS)) {
-+				//printk("status %x, bits %x, slct %x\n", status1, TOE_IQ_ALL_BITS, tp->intr1_selected);
-+				toe_gmac_handle_toeq(dev, tp, status1);
-+				//toe_gmac_handle_toeq(dev, toe, tp, status1);
-+			}
-+#endif
-+		}
-+	}
-+
-+
-+	// Interrupt Status 0
-+	if (status0 & tp->intr0_enabled)
-+	{
-+
-+		#define ERR_INTR_BITS	(GMAC0_TXDERR_INT_BIT | GMAC0_TXPERR_INT_BIT |	\
-+								 GMAC1_TXDERR_INT_BIT | GMAC1_TXPERR_INT_BIT |	\
-+								 GMAC0_RXDERR_INT_BIT | GMAC0_RXPERR_INT_BIT |	\
-+								 GMAC1_RXDERR_INT_BIT | GMAC1_RXPERR_INT_BIT)
-+#ifndef	INTERRUPT_SELECT
-+		if (status0 &  ERR_INTR_BITS)
-+		{
-+			if ((status0 & GMAC0_TXDERR_INT_BIT) && (tp->intr0_enabled & GMAC0_TXDERR_INT_BIT))
-+			{
-+				tp->txDerr_cnt[0]++;
-+				printk("GMAC0 TX AHB Bus Error!\n");
-+			}
-+			if ((status0 & GMAC0_TXPERR_INT_BIT) && (tp->intr0_enabled & GMAC0_TXPERR_INT_BIT))
-+			{
-+				tp->txPerr_cnt[0]++;
-+				printk("GMAC0 Tx Descriptor Protocol Error!\n");
-+			}
-+			if ((status0 & GMAC1_TXDERR_INT_BIT) && (tp->intr0_enabled & GMAC1_TXDERR_INT_BIT))
-+			{
-+				tp->txDerr_cnt[1]++;
-+				printk("GMAC1 Tx AHB Bus Error!\n");
-+			}
-+			if ((status0 & GMAC1_TXPERR_INT_BIT) && (tp->intr0_enabled & GMAC1_TXPERR_INT_BIT))
-+			{
-+				tp->txPerr_cnt[1]++;
-+				printk("GMAC1 Tx Descriptor Protocol Error!\n");
-+			}
-+
-+			if ((status0 & GMAC0_RXDERR_INT_BIT) && (tp->intr0_enabled & GMAC0_RXDERR_INT_BIT))
-+			{
-+				tp->RxDerr_cnt[0]++;
-+				printk("GMAC0 Rx AHB Bus Error!\n");
-+			}
-+			if ((status0 & GMAC0_RXPERR_INT_BIT) && (tp->intr0_enabled & GMAC0_RXPERR_INT_BIT))
-+			{
-+				tp->RxPerr_cnt[0]++;
-+				printk("GMAC0 Rx Descriptor Protocol Error!\n");
-+			}
-+			if ((status0 & GMAC1_RXDERR_INT_BIT) && (tp->intr0_enabled & GMAC1_RXDERR_INT_BIT))
-+			{
-+				tp->RxDerr_cnt[1]++;
-+				printk("GMAC1 Rx AHB Bus Error!\n");
-+			}
-+			if ((status0 & GMAC1_RXPERR_INT_BIT) && (tp->intr0_enabled & GMAC1_RXPERR_INT_BIT))
-+			{
-+				tp->RxPerr_cnt[1]++;
-+				printk("GMAC1 Rx Descriptor Protocol Error!\n");
-+			}
-+		}
-+#endif	//INTERRUPT_SELECT
-+#ifndef	GMAX_TX_INTR_DISABLED
-+		if (tp->port_id == 1 &&	netif_running(dev) &&
-+			(((status0 & GMAC1_SWTQ10_FIN_INT_BIT) && (tp->intr0_enabled & GMAC1_SWTQ10_FIN_INT_BIT))
-+			||
-+			((status0 & GMAC1_SWTQ10_EOF_INT_BIT) && (tp->intr0_enabled & GMAC1_SWTQ10_EOF_INT_BIT))))
-+		{
-+			toe_gmac_tx_complete(&toe_private_data.gmac[1], 0, dev, 1);
-+		}
-+
-+		if (tp->port_id == 0 &&	netif_running(dev) &&
-+			(((status0 & GMAC0_SWTQ00_FIN_INT_BIT) && (tp->intr0_enabled & GMAC0_SWTQ00_FIN_INT_BIT))
-+			||
-+			((status0 & GMAC0_SWTQ00_EOF_INT_BIT) && (tp->intr0_enabled & GMAC0_SWTQ00_EOF_INT_BIT))))
-+		{
-+			toe_gmac_tx_complete(&toe_private_data.gmac[0], 0, dev, 1);
-+		}
-+#endif
-+		// clear enabled status bits
-+	}
-+	// Interrupt Status 4
-+#ifndef	INTERRUPT_SELECT
-+	if (status4 & tp->intr4_enabled)
-+	{
-+		#define G1_INTR4_BITS		(0xff000000)
-+		#define G0_INTR4_BITS		(0x00ff0000)
-+
-+		if (tp->port_id == 0)
-+		{
-+			if ((status4 & G0_INTR4_BITS) && (tp->intr4_enabled & G0_INTR4_BITS))
-+			{
-+				if (status4 & GMAC0_RESERVED_INT_BIT)
-+					printk("GMAC0_RESERVED_INT_BIT is ON\n");
-+				if (status4 & GMAC0_MIB_INT_BIT)
-+					tp->mib_full_cnt++;
-+				if (status4 & GMAC0_RX_PAUSE_ON_INT_BIT)
-+					tp->rx_pause_on_cnt++;
-+				if (status4 & GMAC0_TX_PAUSE_ON_INT_BIT)
-+					tp->tx_pause_on_cnt++;
-+				if (status4 & GMAC0_RX_PAUSE_OFF_INT_BIT)
-+					tp->rx_pause_off_cnt++;
-+				if (status4 & GMAC0_TX_PAUSE_OFF_INT_BIT)
-+					tp->rx_pause_off_cnt++;
-+				if (status4 & GMAC0_RX_OVERRUN_INT_BIT)
-+					tp->rx_overrun_cnt++;
-+				if (status4 & GMAC0_STATUS_CHANGE_INT_BIT)
-+					tp->status_changed_cnt++;
-+			}
-+		}
-+		else if (tp->port_id == 1)
-+		{
-+			if ((status4 & G1_INTR4_BITS) && (tp->intr4_enabled & G1_INTR4_BITS))
-+			{
-+				if (status4 & GMAC1_RESERVED_INT_BIT)
-+					printk("GMAC1_RESERVED_INT_BIT is ON\n");
-+				if (status4 & GMAC1_MIB_INT_BIT)
-+					tp->mib_full_cnt++;
-+				if (status4 & GMAC1_RX_PAUSE_ON_INT_BIT)
-+				{
-+					//printk("Gmac pause on\n");
-+					tp->rx_pause_on_cnt++;
-+				}
-+				if (status4 & GMAC1_TX_PAUSE_ON_INT_BIT)
-+				{
-+					//printk("Gmac pause on\n");
-+					tp->tx_pause_on_cnt++;
-+				}
-+				if (status4 & GMAC1_RX_PAUSE_OFF_INT_BIT)
-+				{
-+					//printk("Gmac pause off\n");
-+					tp->rx_pause_off_cnt++;
-+				}
-+				if (status4 & GMAC1_TX_PAUSE_OFF_INT_BIT)
-+				{
-+					//printk("Gmac pause off\n");
-+					tp->rx_pause_off_cnt++;
-+				}
-+				if (status4 & GMAC1_RX_OVERRUN_INT_BIT)
-+				{
-+					//printk("Gmac Rx Overrun \n");
-+					tp->rx_overrun_cnt++;
-+				}
-+				if (status4 & GMAC1_STATUS_CHANGE_INT_BIT)
-+					tp->status_changed_cnt++;
-+			}
-+		}
-+#if 0
-+		if ((status4 & SWFQ_EMPTY_INT_BIT) && (tp->intr4_enabled & SWFQ_EMPTY_INT_BIT))
-+		{
-+			// unsigned long data = REG32(TOE_GLOBAL_BASE + GLOBAL_SWFQ_RWPTR_REG);
-+//			mac_stop_rxdma(tp->sc);
-+			gmac_write_reg(TOE_GLOBAL_BASE, GLOBAL_INTERRUPT_ENABLE_4_REG,
-+				tp->intr4_enabled & ~SWFQ_EMPTY_INT_BIT, SWFQ_EMPTY_INT_BIT);
-+
-+			gmac_write_reg(TOE_GLOBAL_BASE, GLOBAL_INTERRUPT_STATUS_4_REG,
-+				SWFQ_EMPTY_INT_BIT, SWFQ_EMPTY_INT_BIT);
-+			toe_gmac_fill_free_q();
-+			tp->sw_fq_empty_cnt++;
-+
-+			gmac_write_reg(TOE_GLOBAL_BASE, GLOBAL_INTERRUPT_STATUS_4_REG, status4,
-+				SWFQ_EMPTY_INT_BIT);
-+//#if 0
-+/*			if (netif_running(dev))
-+				toe_gmac_handle_default_rxq(dev, tp);
-+			printk("SWFQ_EMPTY_INT_BIT is ON!\n");	// should not be happened */
-+//#endif
-+		}
-+#endif
-+	}
-+#endif	//INTERRUPT_SELECT
-+	toe_gmac_enable_interrupt(tp->irq);
-+//enable gmac rx function when do RFC 2544
-+#ifdef IxscriptMate_1518
-+	if (storlink_ctl.pauseoff == 1)
-+	{
-+		GMAC_CONFIG0_T config0;
-+		config0.bits32 = readl(TOE_GMAC0_BASE+GMAC_CONFIG0);
-+		config0.bits.dis_rx = 0;
-+		writel(config0.bits32, TOE_GMAC0_BASE+GMAC_CONFIG0);
-+		config0.bits32 = readl(TOE_GMAC1_BASE+GMAC_CONFIG0);
-+		config0.bits.dis_rx = 0;
-+		writel(config0.bits32, TOE_GMAC1_BASE+GMAC_CONFIG0);
-+	}
-+#endif
-+	//printk("gmac_interrupt complete!\n\n");
-+//	return IRQ_RETVAL(handled);
-+	return	IRQ_RETVAL(1);
-+#ifdef CONFIG_SL_NAPI
-+}
-+#endif
-+}
-+
-+/*----------------------------------------------------------------------
-+*	toe_gmac_handle_default_rxq
-+*	(1) Get rx Buffer for default Rx queue
-+*	(2) notify or call upper-routine to handle it
-+*	(3) get a new buffer and insert it into SW free queue
-+*	(4) Note: The SW free queue Read-Write Pointer should be locked when accessing
-+*----------------------------------------------------------------------*/
-+//static inline void toe_gmac_handle_default_rxq(struct net_device *dev, GMAC_INFO_T *tp)
-+static void toe_gmac_handle_default_rxq(struct net_device *dev, GMAC_INFO_T *tp)
-+{
-+	TOE_INFO_T			*toe;
-+    GMAC_RXDESC_T   	*curr_desc;
-+	struct sk_buff 		*skb;
-+    DMA_RWPTR_T			rwptr;
-+	unsigned int 		pkt_size;
-+	int					max_cnt;
-+	unsigned int        desc_count;
-+	unsigned int        good_frame, chksum_status, rx_status;
-+	struct net_device_stats *isPtr = (struct net_device_stats *)&tp->ifStatics;
-+
-+//when do ixia RFC 2544 test and packet size is select 1518 bytes,disable gmace rx function immediately after one interrupt come in.
-+#ifdef IxscriptMate_1518
-+	if (storlink_ctl.pauseoff == 1)
-+	{
-+		GMAC_CONFIG0_T config0;
-+		config0.bits32 = readl(TOE_GMAC0_BASE+GMAC_CONFIG0);
-+		config0.bits.dis_rx = 1;
-+		writel(config0.bits32, TOE_GMAC0_BASE+GMAC_CONFIG0);
-+		config0.bits32 = readl(TOE_GMAC1_BASE+GMAC_CONFIG0);
-+		config0.bits.dis_rx = 1;
-+		writel(config0.bits32, TOE_GMAC1_BASE+GMAC_CONFIG0);
-+	}
-+#endif
-+	rwptr.bits32 = readl(&tp->default_qhdr->word1);
-+#if 0
-+	if (rwptr.bits.rptr != tp->rx_rwptr.bits.rptr)
-+	{
-+		mac_stop_txdma((struct net_device *)tp->dev);
-+		printk("Default Queue HW RD ptr (0x%x) != SW RD Ptr (0x%x)\n",
-+				rwptr.bits32, tp->rx_rwptr.bits.rptr);
-+		while(1);
-+	}
-+#endif
-+	toe = (TOE_INFO_T *)&toe_private_data;
-+	max_cnt = DEFAULT_RXQ_MAX_CNT;
-+	while ((--max_cnt) && rwptr.bits.rptr != rwptr.bits.wptr)
-+//	while (rwptr.bits.rptr != rwptr.bits.wptr)
-+	{
-+//if packet size is not 1518 for RFC 2544,enable gmac rx function.The other packet size have RX workaround.
-+#ifdef IxscriptMate_1518
-+    	if (storlink_ctl.pauseoff == 1)
-+		{
-+			if (pkt_size != 1514)
-+			{
-+						GMAC_CONFIG0_T config0;
-+						config0.bits32 = readl(TOE_GMAC0_BASE+GMAC_CONFIG0);
-+						config0.bits.dis_rx = 0;
-+						writel(config0.bits32, TOE_GMAC0_BASE+GMAC_CONFIG0);
-+						config0.bits32 = readl(TOE_GMAC1_BASE+GMAC_CONFIG0);
-+						config0.bits.dis_rx = 0;
-+						writel(config0.bits32, TOE_GMAC1_BASE+GMAC_CONFIG0);
-+			}
-+		}
-+#endif
-+    	curr_desc = (GMAC_RXDESC_T *)tp->default_desc_base + rwptr.bits.rptr;
-+//		consistent_sync(curr_desc, sizeof(GMAC_RXDESC_T), PCI_DMA_FROMDEVICE);
-+		tp->default_q_cnt++;
-+    	tp->rx_curr_desc = (unsigned int)curr_desc;
-+    	rx_status = curr_desc->word0.bits.status;
-+    	chksum_status = curr_desc->word0.bits.chksum_status;
-+    	tp->rx_status_cnt[rx_status]++;
-+    	tp->rx_chksum_cnt[chksum_status]++;
-+        pkt_size = curr_desc->word1.bits.byte_count;  /*total byte count in a frame*/
-+		desc_count = curr_desc->word0.bits.desc_count; /* get descriptor count per frame */
-+		good_frame=1;
-+		if ((curr_desc->word0.bits32 & (GMAC_RXDESC_0_T_derr | GMAC_RXDESC_0_T_perr))
-+			|| (pkt_size < 60)
-+		    || (chksum_status & 0x4)
-+			|| rx_status)
-+		{
-+			good_frame = 0;
-+			if (curr_desc->word0.bits32 & GMAC_RXDESC_0_T_derr)
-+				printk("%s::derr (GMAC-%d)!!!\n", __func__, tp->port_id);
-+			if (curr_desc->word0.bits32 & GMAC_RXDESC_0_T_perr)
-+				printk("%s::perr (GMAC-%d)!!!\n", __func__, tp->port_id);
-+			if (rx_status)
-+			{
-+				if (rx_status == 4 || rx_status == 7)
-+					isPtr->rx_crc_errors++;
-+//				printk("%s::Status=%d (GMAC-%d)!!!\n", __func__, rx_status, tp->port_id);
-+			}
-+#ifdef SL351x_GMAC_WORKAROUND
-+			else if (pkt_size < 60)
-+			{
-+				if (tp->short_frames_cnt < GMAC_SHORT_FRAME_THRESHOLD)
-+					tp->short_frames_cnt++;
-+				if (tp->short_frames_cnt >= GMAC_SHORT_FRAME_THRESHOLD)
-+				{
-+					GMAC_CONFIG0_T config0;
-+					config0.bits32 = readl(TOE_GMAC0_BASE+GMAC_CONFIG0);
-+					config0.bits.dis_rx = 1;
-+					writel(config0.bits32, TOE_GMAC0_BASE+GMAC_CONFIG0);
-+					config0.bits32 = readl(TOE_GMAC1_BASE+GMAC_CONFIG0);
-+					config0.bits.dis_rx = 1;
-+					writel(config0.bits32, TOE_GMAC1_BASE+GMAC_CONFIG0);
-+				}
-+			}
-+#endif
-+//			if (chksum_status)
-+//				printk("%s::Checksum Status=%d (GMAC-%d)!!!\n", __func__, chksum_status, tp->port_id);
-+			skb = (struct sk_buff *)(REG32(__va(curr_desc->word2.buf_adr) - SKB_RESERVE_BYTES));
-+			dev_kfree_skb_irq(skb);
-+		}
-+		if (good_frame)
-+		{
-+			if (curr_desc->word0.bits.drop)
-+				printk("%s::Drop (GMAC-%d)!!!\n", __func__, tp->port_id);
-+//			if (chksum_status)
-+//				printk("%s::Checksum Status=%d (GMAC-%d)!!!\n", __func__, chksum_status, tp->port_id);
-+
-+	    	/* get frame information from the first descriptor of the frame */
-+#ifdef SL351x_GMAC_WORKAROUND
-+			if (tp->short_frames_cnt >= GMAC_SHORT_FRAME_THRESHOLD)
-+			{
-+				GMAC_CONFIG0_T config0;
-+				config0.bits32 = readl(TOE_GMAC0_BASE+GMAC_CONFIG0);
-+				config0.bits.dis_rx = 0;
-+				writel(config0.bits32, TOE_GMAC0_BASE+GMAC_CONFIG0);
-+				config0.bits32 = readl(TOE_GMAC1_BASE+GMAC_CONFIG0);
-+				config0.bits.dis_rx = 0;
-+				writel(config0.bits32, TOE_GMAC1_BASE+GMAC_CONFIG0);
-+			}
-+			tp->short_frames_cnt = 0;
-+#endif
-+			isPtr->rx_packets++;
-+			skb = (struct sk_buff *)(REG32(__va(curr_desc->word2.buf_adr - SKB_RESERVE_BYTES)));
-+			if (!skb)
-+			{
-+				printk("Fatal Error!!skb==NULL\n");
-+				goto next_rx;
-+			}
-+			tp->curr_rx_skb = skb;
-+			// consistent_sync((void *)__va(curr_desc->word2.buf_adr), pkt_size, PCI_DMA_FROMDEVICE);
-+
-+	//		curr_desc->word2.buf_adr = 0;
-+
-+			skb_reserve (skb, RX_INSERT_BYTES);	/* 16 byte align the IP fields. */
-+			skb_put(skb, pkt_size);
-+			skb->dev = dev;
-+			if (chksum_status == RX_CHKSUM_IP_UDP_TCP_OK)
-+			{
-+				skb->ip_summed = CHECKSUM_UNNECESSARY;
-+#ifdef CONFIG_SL351x_NAT
-+				if (nat_cfg.enabled && curr_desc->word3.bits.l3_offset && curr_desc->word3.bits.l4_offset)
-+				{
-+					struct iphdr	*ip_hdr;
-+					ip_hdr = (struct iphdr *)&(skb->data[curr_desc->word3.bits.l3_offset]);
-+					sl351x_nat_input(skb,
-+									tp->port_id,
-+									(void *)curr_desc->word3.bits.l3_offset,
-+								  	(void *)curr_desc->word3.bits.l4_offset);
-+				}
-+#endif
-+				skb->protocol = eth_type_trans(skb,dev); /* set skb protocol */
-+#if 0
-+#ifdef CONFIG_SL351x_RXTOE
-+				if (storlink_ctl.rx_max_pktsize) {
-+					struct iphdr	*ip_hdr;
-+					struct tcphdr	*tcp_hdr;
-+					int ip_hdrlen;
-+
-+ 					ip_hdr = (struct iphdr*)&(skb->data[0]);
-+					if ((skb->protocol == __constant_htons(ETH_P_IP)) &&
-+					   ((ip_hdr->protocol & 0x00ff) == IPPROTO_TCP)) {
-+						ip_hdrlen = ip_hdr->ihl << 2;
-+						tcp_hdr = (struct tcphdr*)&(skb->data[ip_hdrlen]);
-+						if (tcp_hdr->syn) {
-+							struct toe_conn* connection = init_toeq(ip_hdr->version,
-+									ip_hdr, tcp_hdr, toe, &(skb->data[0]) - 14);
-+							TCP_SKB_CB(skb)->connection = connection;
-+							//	hash_dump_entry(TCP_SKB_CB(skb)->connection->hash_entry_index);
-+							//		printk("%s::skb data %x, conn %x, mode %x\n",
-+							//			__func__, skb->data, connection, connection->mode);
-+						}
-+					}
-+				}
-+#endif
-+#endif
-+			}
-+			else if (chksum_status == RX_CHKSUM_IP_OK_ONLY)
-+			{
-+				skb->ip_summed = CHECKSUM_UNNECESSARY;
-+#ifdef CONFIG_SL351x_NAT
-+				if (nat_cfg.enabled && curr_desc->word3.bits.l3_offset && curr_desc->word3.bits.l4_offset)
-+				{
-+					struct iphdr		*ip_hdr;
-+					//struct tcphdr		*tcp_hdr;
-+					ip_hdr = (struct iphdr *)&(skb->data[curr_desc->word3.bits.l3_offset]);
-+					//tcp_hdr = (struct tcphdr *)&(skb->data[curr_desc->word3.bits.l4_offset]);
-+					if (ip_hdr->protocol == IPPROTO_UDP)
-+					{
-+						sl351x_nat_input(skb,
-+										tp->port_id,
-+										(void *)curr_desc->word3.bits.l3_offset,
-+								  		(void *)curr_desc->word3.bits.l4_offset);
-+					}
-+					else if (ip_hdr->protocol == IPPROTO_GRE)
-+					{
-+						sl351x_nat_input(skb,
-+									tp->port_id,
-+									(void *)curr_desc->word3.bits.l3_offset,
-+								  	(void *)curr_desc->word3.bits.l4_offset);
-+					}
-+				}
-+#endif
-+				skb->protocol = eth_type_trans(skb,dev); /* set skb protocol */
-+			}
-+			else
-+			{
-+				skb->protocol = eth_type_trans(skb,dev); /* set skb protocol */
-+			}
-+
-+			netif_rx(skb);  /* socket rx */
-+			dev->last_rx = jiffies;
-+
-+			isPtr->rx_bytes += pkt_size;
-+
-+        }
-+
-+next_rx:
-+		// advance one for Rx default Q 0/1
-+		rwptr.bits.rptr = RWPTR_ADVANCE_ONE(rwptr.bits.rptr, tp->default_desc_num);
-+		SET_RPTR(&tp->default_qhdr->word1, rwptr.bits.rptr);
-+     	tp->rx_rwptr.bits32 = rwptr.bits32;
-+
-+		toe_gmac_fill_free_q();
-+	}
-+}
-+
-+/*----------------------------------------------------------------------
-+* gmac_get_phy_vendor
-+*----------------------------------------------------------------------*/
-+static unsigned int gmac_get_phy_vendor(int phy_addr)
-+{
-+    unsigned int	reg_val;
-+    reg_val=(mii_read(phy_addr,0x02) << 16) + mii_read(phy_addr,0x03);
-+    return reg_val;
-+}
-+
-+/*----------------------------------------------------------------------
-+* gmac_set_phy_status
-+*----------------------------------------------------------------------*/
-+void gmac_set_phy_status(struct net_device *dev)
-+{
-+	GMAC_INFO_T *tp = dev->priv;
-+	GMAC_STATUS_T   status;
-+	unsigned int    reg_val, ability,wan_port_id;
-+	unsigned int    i = 0;
-+
-+#ifdef VITESSE_G5SWITCH
-+	if((tp->port_id == GMAC_PORT1)&&(Giga_switch==1)){
-+#if 0
-+		rcv_mask = SPI_read(2,0,0x10);			// Receive mask
-+		rcv_mask |= 0x4F;
-+		for(i=0;i<4;i++){
-+			reg_val = BIT(26)|(i<<21)|(10<<16);
-+			SPI_write(3,0,1,reg_val);
-+			msleep(10);
-+			reg_val = SPI_read(3,0,2);
-+			if(reg_val & 0x0c00){
-+				printk("Port%d:Giga mode\n",i);
-+				SPI_write(1,i,0x00,0x300701B1);
-+				SPI_write(1,i,0x00,0x10070181);
-+				switch_pre_link[i]=LINK_UP;
-+				switch_pre_speed[i]=GMAC_SPEED_1000;
-+			}
-+			else{
-+				reg_val = BIT(26)|(i<<21)|(5<<16);
-+				SPI_write(3,0,1,reg_val);
-+				msleep(10);
-+				ability = (reg_val = SPI_read(3,0,2)&0x5e0) >>5;
-+				if ((ability & 0x0C)) /* 100M full duplex */
-+				{
-+					SPI_write(1,i,0x00,0x30050472);
-+					SPI_write(1,i,0x00,0x10050442);
-+					printk("Port%d:100M\n",i);
-+					switch_pre_link[i]=LINK_UP;
-+				switch_pre_speed[i]=GMAC_SPEED_100;
-+				}
-+				else if((ability & 0x03)) /* 10M full duplex */
-+				{
-+					SPI_write(1,i,0x00,0x30050473);
-+					SPI_write(1,i,0x00,0x10050443);
-+					printk("Port%d:10M\n",i);
-+					switch_pre_link[i]=LINK_UP;
-+					switch_pre_speed[i]=GMAC_SPEED_10;
-+				}
-+				else{
-+					SPI_write(1,i,0x00,BIT(16));			// disable RX
-+					SPI_write(5,0,0x0E,BIT(i));			// dicard packet
-+					while((SPI_read(5,0,0x0C)&BIT(i))==0)		// wait to be empty
-+						msleep(1);
-+
-+					SPI_write(1,i,0x00,0x20000030);			// PORT_RST
-+					switch_pre_link[i]=LINK_DOWN;
-+					switch_pre_speed[i]=GMAC_SPEED_10;
-+					rcv_mask &= ~BIT(i);
-+					SPI_write(2,0,0x10,rcv_mask);			// Disable Receive
-+				}
-+			}
-+		}
-+#endif
-+		gmac_get_switch_status(dev);
-+		gmac_write_reg(tp->base_addr, GMAC_STATUS, 0x7d, 0x0000007f);
-+//		SPI_write(2,0,0x10,rcv_mask);			// Enable Receive
-+		return ;
-+	}
-+#endif
-+
-+	reg_val = gmac_get_phy_vendor(tp->phy_addr);
-+	printk("GMAC-%d Addr %d Vendor ID: 0x%08x\n", tp->port_id, tp->phy_addr, reg_val);
-+
-+	switch (tp->phy_mode)
-+	{
-+		case GMAC_PHY_GMII:
-+		mii_write(tp->phy_addr,0x04,0x05e1); /* advertisement 100M full duplex, pause capable on */
-+		#ifdef CONFIG_SL3516_ASIC
-+		mii_write(tp->phy_addr,0x09,0x0300); /* advertise 1000M full/half duplex */
-+		#else
-+		mii_write(tp->phy_addr,0x09,0x0000); /* advertise no 1000M full/half duplex */
-+		#endif
-+		break;
-+		case GMAC_PHY_RGMII_100:
-+		mii_write(tp->phy_addr,0x04,0x05e1); /* advertisement 100M full duplex, pause capable on */
-+		mii_write(tp->phy_addr,0x09,0x0000); /* advertise no 1000M */
-+		break;
-+		case GMAC_PHY_RGMII_1000:
-+		mii_write(tp->phy_addr,0x04,0x05e1); /* advertisement 100M full duplex, pause capable on */
-+		#ifdef CONFIG_SL3516_ASIC
-+		mii_write(tp->phy_addr,0x09,0x0300); /* advertise 1000M full/half duplex */
-+		#else
-+		mii_write(tp->phy_addr,0x09,0x0000); /* advertise no 1000M full/half duplex */
-+		#endif
-+		break;
-+		case GMAC_PHY_MII:
-+		default:
-+		mii_write(tp->phy_addr,0x04,0x05e1); /* advertisement 100M full duplex, pause capable on */
-+		mii_write(tp->phy_addr,0x09,0x0000); /* advertise no 1000M */
-+		break;
-+	}
-+
-+	mii_write(tp->phy_addr,0x18,0x0041);	// Phy active led
-+	if (tp->auto_nego_cfg)
-+	{
-+		reg_val = 0x1200 | (1 << 15);
-+		mii_write(tp->phy_addr,0x00,reg_val); /* Enable and Restart Auto-Negotiation */
-+		mdelay(500);
-+		reg_val &= ~(1 << 15);
-+		mii_write(tp->phy_addr, 0x00, reg_val);
-+	}
-+	else
-+	{
-+		reg_val = 0;
-+		reg_val |= (tp->full_duplex_cfg) ? (1 << 8) : 0;
-+		reg_val |= (tp->speed_cfg == GMAC_SPEED_1000) ? (1 << 6) : 0;
-+		reg_val |= (tp->speed_cfg == GMAC_SPEED_100) ? (1 << 13) : 0;
-+		mii_write(tp->phy_addr, 0x00, reg_val);
-+		mdelay(100);
-+
-+		reg_val |= (1 << 15);	// Reset PHY;
-+		mii_write(tp->phy_addr, 0x00, reg_val);
-+	}
-+
-+	status.bits32 = 0;
-+	/* set PHY operation mode */
-+	status.bits.mii_rmii = tp->phy_mode;
-+	status.bits.reserved = 1;
-+	mdelay(100);
-+	while (((reg_val=mii_read(tp->phy_addr,0x01)) & 0x00000004)!=0x04)
-+	{
-+		msleep(100);
-+		i++;
-+		if (i > 30)
-+		break;
-+	}
-+	if (i>30)
-+	{
-+		tp->pre_phy_status = LINK_DOWN;
-+		status.bits.link = LINK_DOWN;
-+		//		clear_bit(__LINK_STATE_START, &dev->state);
-+		printk("Link Down (0x%04x) ", reg_val);
-+		if(Giga_switch == 1)
-+		{
-+				wan_port_id = 1;
-+#ifdef CONFIG_SL351x_SYSCTL
-+				storlink_ctl.link[ wan_port_id] = 0;
-+#endif
-+		}
-+		else
-+		{
-+#ifdef CONFIG_SL351x_SYSCTL
-+				storlink_ctl.link[ tp->port_id] = 0;
-+#endif
-+		}
-+	}
-+	else
-+	{
-+		tp->pre_phy_status = LINK_UP;
-+		status.bits.link = LINK_UP;
-+		//		set_bit(__LINK_STATE_START, &dev->state);
-+		printk("Link Up (0x%04x) ",reg_val);
-+		if(Giga_switch == 1)
-+		{
-+				wan_port_id = 1;
-+#ifdef CONFIG_SL351x_SYSCTL
-+				storlink_ctl.link[ wan_port_id] = 1;
-+#endif
-+		}
-+		else
-+		{
-+#ifdef CONFIG_SL351x_SYSCTL
-+				storlink_ctl.link[ tp->port_id] = 1;
-+#endif
-+		}
-+	}
-+	//    value = mii_read(PHY_ADDR,0x05);
-+
-+	ability = (mii_read(tp->phy_addr,0x05) & 0x05E0) >> 5;
-+
-+	//#ifdef CONFIG_SL3516_ASIC
-+	reg_val = mii_read(tp->phy_addr,10);
-+	printk("MII REG 10 = 0x%x\n",reg_val);
-+
-+	if ((reg_val & 0x0800) == 0x0800)
-+	{
-+		status.bits.duplex = 1;
-+		status.bits.speed = 2;
-+		if (status.bits.mii_rmii == GMAC_PHY_RGMII_100)
-+		status.bits.mii_rmii = GMAC_PHY_RGMII_1000;
-+
-+		printk(" 1000M/Full \n");
-+	}
-+	else if ((reg_val & 0x0400) == 0x0400)
-+	{
-+		status.bits.duplex = 0;
-+		status.bits.speed = 2;
-+		if (status.bits.mii_rmii == GMAC_PHY_RGMII_100)
-+		status.bits.mii_rmii = GMAC_PHY_RGMII_1000;
-+
-+		printk(" 1000M/Half \n");
-+	}
-+	//#endif
-+	else
-+	{
-+		#ifdef CONFIG_SL3516_ASIC
-+		if (status.bits.mii_rmii == GMAC_PHY_RGMII_1000)
-+		status.bits.mii_rmii = GMAC_PHY_RGMII_100;
-+		#endif
-+		printk("MII REG 5 (bit 5:15) = 0x%x\n", ability);
-+		if ((ability & 0x08)==0x08) /* 100M full duplex */
-+		{
-+			status.bits.duplex = 1;
-+			status.bits.speed = 1;
-+			printk(" 100M/Full\n");
-+
-+		}
-+		else if ((ability & 0x04)==0x04) /* 100M half duplex */
-+		{
-+			status.bits.duplex = 0;
-+			status.bits.speed = 1;
-+			printk(" 100M/Half\n");
-+
-+		}
-+		else if ((ability & 0x02)==0x02) /* 10M full duplex */
-+		{
-+			status.bits.duplex = 1;
-+			status.bits.speed = 0;
-+			printk(" 10M/Full\n");
-+
-+		}
-+		else if ((ability & 0x01)==0x01) /* 10M half duplex */
-+		{
-+			status.bits.duplex = 0;
-+			status.bits.speed = 0;
-+			printk(" 10M/Half\n");
-+
-+		}
-+	}
-+	if ((ability & 0x20)==0x20)
-+	{
-+		tp->flow_control_enable = 1;
-+		printk("Flow Control Enable.\n");
-+	}
-+	else
-+	{
-+		tp->flow_control_enable = 0;
-+		printk("Flow Control Disable.\n");
-+	}
-+	tp->full_duplex_status = status.bits.duplex;
-+	tp->speed_status = status.bits.speed;
-+	if (!tp->auto_nego_cfg)
-+	{
-+		status.bits.duplex = tp->full_duplex_cfg;
-+		status.bits.speed = tp->speed_cfg;
-+	}
-+	toe_gmac_disable_tx_rx(dev);
-+	mdelay(10);
-+	gmac_write_reg(tp->base_addr, GMAC_STATUS, status.bits32, 0x0000007f);
-+	toe_gmac_enable_tx_rx(dev);
-+}
-+
-+/*----------------------------------------------------------------------
-+* gmac_phy_thread
-+*----------------------------------------------------------------------*/
-+static int gmac_phy_thread (void *data)
-+{
-+	struct net_device   *dev = data;
-+	GMAC_INFO_T *tp = dev->priv;
-+	unsigned long       timeout;
-+
-+    daemonize("%s", dev->name);
-+	allow_signal(SIGTERM);
-+//	reparent_to_init();
-+//	spin_lock_irq(¤t->sigmask_lock);
-+//	sigemptyset(¤t->blocked);
-+//	recalc_sigpending(current);
-+//	spin_unlock_irq(¤t->sigmask_lock);
-+//	strncpy (current->comm, dev->name, sizeof(current->comm) - 1);
-+//	current->comm[sizeof(current->comm) - 1] = '\0';
-+
-+	while (1)
-+	{
-+	    timeout = next_tick;
-+		do
-+		{
-+			timeout = interruptible_sleep_on_timeout (&tp->thr_wait, timeout);
-+		} while (!signal_pending (current) && (timeout > 0));
-+
-+		if (signal_pending (current))
-+		{
-+//			spin_lock_irq(¤t->sigmask_lock);
-+			flush_signals(current);
-+//			spin_unlock_irq(¤t->sigmask_lock);
-+		}
-+
-+		if (tp->time_to_die)
-+			break;
-+
-+		// printk("%s : Polling MAC %d PHY Status...\n",__func__, tp->port_id);
-+		rtnl_lock ();
-+		if (tp->auto_nego_cfg){
-+#ifdef VITESSE_G5SWITCH
-+        		if((tp->port_id == GMAC_PORT1)&&(Giga_switch==1))
-+	        		gmac_get_switch_status(dev);
-+        		else
-+#endif
-+        			gmac_get_phy_status(dev); //temp remove
-+        	}
-+		rtnl_unlock ();
-+	}
-+	complete_and_exit (&tp->thr_exited, 0);
-+}
-+
-+/*----------------------------------------------------------------------
-+* gmac_get_switch_status
-+*----------------------------------------------------------------------*/
-+#ifdef VITESSE_G5SWITCH
-+void gmac_get_switch_status(struct net_device *dev)
-+{
-+	GMAC_INFO_T *tp = dev->priv;
-+	GMAC_CONFIG0_T	config0,config0_mask;
-+	unsigned int	switch_port_id;
-+	int get_link=0;
-+
-+	get_link = Get_Set_port_status();
-+	if(get_link){				// link
-+		if(ever_dwon){
-+			ever_dwon = 0;
-+			toe_gmac_enable_tx_rx(dev);
-+			netif_wake_queue(dev);
-+			set_bit(__LINK_STATE_START, &dev->state);
-+		}
-+	}
-+	else{					// all down
-+		//printk("All link down\n");
-+		ever_dwon=1;
-+		netif_stop_queue(dev);
-+		toe_gmac_disable_tx_rx(dev);
-+		clear_bit(__LINK_STATE_START, &dev->state);
-+	}
-+
-+	if ( tp->port_id == 1 )
-+		switch_port_id = 0;
-+#ifdef CONFIG_SL351x_SYSCTL
-+	if (get_link)
-+	{
-+		storlink_ctl.link[switch_port_id] = 1;
-+	}
-+	else
-+	{
-+		storlink_ctl.link[switch_port_id] = 0;
-+	}
-+	if (storlink_ctl.pauseoff == 1)
-+		{
-+			if (tp->flow_control_enable == 1)
-+			{
-+				config0.bits32 = 0;
-+				config0_mask.bits32 = 0;
-+				config0.bits.tx_fc_en = 0; /* disable tx flow control */
-+				config0.bits.rx_fc_en = 0; /* disable rx flow control */
-+				config0_mask.bits.tx_fc_en = 1;
-+				config0_mask.bits.rx_fc_en = 1;
-+				gmac_write_reg(tp->base_addr, GMAC_CONFIG0,config0.bits32,config0_mask.bits32);
-+				printk("Disable SWITCH Flow Control...\n");
-+			}
-+				tp->flow_control_enable = 0;
-+		}
-+		else
-+#endif
-+		{
-+			if (tp->flow_control_enable == 0)
-+			{
-+				config0.bits32 = 0;
-+				config0_mask.bits32 = 0;
-+				config0.bits.tx_fc_en = 1; /* enable tx flow control */
-+				config0.bits.rx_fc_en = 1; /* enable rx flow control */
-+				config0_mask.bits.tx_fc_en = 1;
-+				config0_mask.bits.rx_fc_en = 1;
-+				gmac_write_reg(tp->base_addr, GMAC_CONFIG0,config0.bits32,config0_mask.bits32);
-+				printk("Enable SWITCH Flow Control...\n");
-+			}
-+			tp->flow_control_enable = 1;
-+		}
-+	return ;
-+
-+}
-+#endif
-+
-+/*----------------------------------------------------------------------
-+* gmac_get_phy_status
-+*----------------------------------------------------------------------*/
-+void gmac_get_phy_status(struct net_device *dev)
-+{
-+	GMAC_INFO_T *tp = dev->priv;
-+	GMAC_CONFIG0_T	config0,config0_mask;
-+	GMAC_STATUS_T   status, old_status;
-+	unsigned int    reg_val,ability,wan_port_id;
-+
-+	old_status.bits32 = status.bits32 = gmac_read_reg(tp->base_addr, GMAC_STATUS);
-+
-+
-+	/* read PHY status register */
-+	reg_val = mii_read(tp->phy_addr,0x01);
-+	if ((reg_val & 0x0024) == 0x0024) /* link is established and auto_negotiate process completed */
-+	{
-+		ability = (mii_read(tp->phy_addr,0x05) & 0x05E0) >> 5;
-+		/* read PHY Auto-Negotiation Link Partner Ability Register */
-+		#ifdef CONFIG_SL3516_ASIC
-+		reg_val = mii_read(tp->phy_addr,10);
-+		if ((reg_val & 0x0800) == 0x0800)
-+		{
-+			status.bits.duplex = 1;
-+			status.bits.speed = 2;
-+			if (status.bits.mii_rmii == GMAC_PHY_RGMII_100)
-+			status.bits.mii_rmii = GMAC_PHY_RGMII_1000;
-+		}
-+		else if ((reg_val & 0x0400) == 0x0400)
-+		{
-+			status.bits.duplex = 0;
-+			status.bits.speed = 2;
-+			if (status.bits.mii_rmii == GMAC_PHY_RGMII_100)
-+			status.bits.mii_rmii = GMAC_PHY_RGMII_1000;
-+		}
-+		else
-+		#endif
-+		{
-+			#ifdef CONFIG_SL3516_ASIC
-+			if (status.bits.mii_rmii == GMAC_PHY_RGMII_1000)
-+			status.bits.mii_rmii = GMAC_PHY_RGMII_100;
-+			#endif
-+			if ((ability & 0x08)==0x08) /* 100M full duplex */
-+			{
-+				status.bits.duplex = 1;
-+				status.bits.speed = 1;
-+			}
-+			else if ((ability & 0x04)==0x04) /* 100M half duplex */
-+			{
-+				status.bits.duplex = 0;
-+				status.bits.speed = 1;
-+			}
-+			else if ((ability & 0x02)==0x02) /* 10M full duplex */
-+			{
-+				status.bits.duplex = 1;
-+				status.bits.speed = 0;
-+			}
-+			else if ((ability & 0x01)==0x01) /* 10M half duplex */
-+			{
-+				status.bits.duplex = 0;
-+				status.bits.speed = 0;
-+			}
-+		}
-+		status.bits.link = LINK_UP; /* link up */
-+		if(Giga_switch==1)
-+		{
-+				wan_port_id = 1;
-+#ifdef CONFIG_SL351x_SYSCTL
-+				storlink_ctl.link[ wan_port_id] = 1;
-+		}
-+		else
-+		{
-+				storlink_ctl.link[ tp->port_id] = 1;
-+#endif
-+		}
-+		if ((ability & 0x20)==0x20)
-+		{
-+			if (tp->flow_control_enable == 0)
-+			{
-+				config0.bits32 = 0;
-+				config0_mask.bits32 = 0;
-+				config0.bits.tx_fc_en = 1; /* enable tx flow control */
-+				config0.bits.rx_fc_en = 1; /* enable rx flow control */
-+				config0_mask.bits.tx_fc_en = 1;
-+				config0_mask.bits.rx_fc_en = 1;
-+				gmac_write_reg(tp->base_addr, GMAC_CONFIG0,config0.bits32,config0_mask.bits32);
-+				printk("GMAC-%d Flow Control Enable.\n", tp->port_id);
-+			}
-+			tp->flow_control_enable = 1;
-+		}
-+		else
-+		{
-+			if (tp->flow_control_enable == 1)
-+			{
-+				config0.bits32 = 0;
-+				config0_mask.bits32 = 0;
-+				config0.bits.tx_fc_en = 0; /* disable tx flow control */
-+				config0.bits.rx_fc_en = 0; /* disable rx flow control */
-+				config0_mask.bits.tx_fc_en = 1;
-+				config0_mask.bits.rx_fc_en = 1;
-+				gmac_write_reg(tp->base_addr, GMAC_CONFIG0,config0.bits32,config0_mask.bits32);
-+				printk("GMAC-%d Flow Control Disable.\n", tp->port_id);
-+			}
-+			tp->flow_control_enable = 0;
-+		}
-+
-+		if (tp->pre_phy_status == LINK_DOWN)
-+		{
-+			printk("GMAC-%d LINK_UP......\n",tp->port_id);
-+			tp->pre_phy_status = LINK_UP;
-+		}
-+	}
-+	else
-+	{
-+		status.bits.link = LINK_DOWN; /* link down */
-+		if(Giga_switch == 1)
-+		{
-+				wan_port_id = 1;
-+#ifdef CONFIG_SL351x_SYSCTL
-+				storlink_ctl.link[ wan_port_id] = 0;
-+		}
-+		else
-+		{
-+				storlink_ctl.link[ tp->port_id] = 0;
-+#endif
-+		}
-+		if (tp->pre_phy_status == LINK_UP)
-+		{
-+			printk("GMAC-%d LINK_Down......\n",tp->port_id);
-+			tp->pre_phy_status = LINK_DOWN;
-+		}
-+	}
-+
-+	tp->full_duplex_status = status.bits.duplex;
-+	tp->speed_status = status.bits.speed;
-+	if (!tp->auto_nego_cfg)
-+	{
-+		status.bits.duplex = tp->full_duplex_cfg;
-+		status.bits.speed = tp->speed_cfg;
-+	}
-+
-+	if (old_status.bits32 != status.bits32)
-+	{
-+		netif_stop_queue(dev);
-+		toe_gmac_disable_tx_rx(dev);
-+		clear_bit(__LINK_STATE_START, &dev->state);
-+		printk("GMAC-%d Change Status Bits 0x%x-->0x%x\n",tp->port_id, old_status.bits32, status.bits32);
-+		mdelay(10); // let GMAC consume packet
-+		gmac_write_reg(tp->base_addr, GMAC_STATUS, status.bits32, 0x0000007f);
-+		if (status.bits.link == LINK_UP)
-+		{
-+			toe_gmac_enable_tx_rx(dev);
-+			netif_wake_queue(dev);
-+			set_bit(__LINK_STATE_START, &dev->state);
-+		}
-+	}
-+}
-+
-+/***************************************/
-+/* define GPIO module base address     */
-+/***************************************/
-+#define GPIO_BASE_ADDR  (IO_ADDRESS(SL2312_GPIO_BASE))
-+#define GPIO_BASE_ADDR1  (IO_ADDRESS(SL2312_GPIO_BASE1))
-+
-+/* define GPIO pin for MDC/MDIO */
-+#ifdef CONFIG_SL3516_ASIC
-+#define H_MDC_PIN           22
-+#define H_MDIO_PIN          21
-+#define G_MDC_PIN           22
-+#define G_MDIO_PIN          21
-+#else
-+#define H_MDC_PIN           3
-+#define H_MDIO_PIN          2
-+#define G_MDC_PIN           0
-+#define G_MDIO_PIN          1
-+#endif
-+
-+//#define GPIO_MDC             0x80000000
-+//#define GPIO_MDIO            0x00400000
-+
-+static unsigned int GPIO_MDC = 0;
-+static unsigned int GPIO_MDIO = 0;
-+static unsigned int GPIO_MDC_PIN = 0;
-+static unsigned int GPIO_MDIO_PIN = 0;
-+
-+// For PHY test definition!!
-+#define LPC_EECK		0x02
-+#define LPC_EDIO		0x04
-+#define LPC_GPIO_SET		3
-+#define LPC_BASE_ADDR		IO_ADDRESS(IT8712_IO_BASE)
-+#define inb_gpio(x)		inb(LPC_BASE_ADDR + IT8712_GPIO_BASE + x)
-+#define outb_gpio(x, y)		outb(y, LPC_BASE_ADDR + IT8712_GPIO_BASE + x)
-+
-+enum GPIO_REG
-+{
-+    GPIO_DATA_OUT   = 0x00,
-+    GPIO_DATA_IN    = 0x04,
-+    GPIO_PIN_DIR    = 0x08,
-+    GPIO_BY_PASS    = 0x0c,
-+    GPIO_DATA_SET   = 0x10,
-+    GPIO_DATA_CLEAR = 0x14,
-+};
-+/***********************/
-+/*    MDC : GPIO[31]   */
-+/*    MDIO: GPIO[22]   */
-+/***********************/
-+
-+/***************************************************
-+* All the commands should have the frame structure:
-+*

-+****************************************************/
-+
-+/*****************************************************************
-+* Inject a bit to NWay register through CSR9_MDC,MDIO
-+*******************************************************************/
-+void mii_serial_write(char bit_MDO) // write data into mii PHY
-+{
-+#ifdef CONFIG_SL2312_LPC_IT8712
-+	unsigned char iomode,status;
-+
-+	iomode = LPCGetConfig(LDN_GPIO, 0xc8 + LPC_GPIO_SET);
-+	iomode |= (LPC_EECK|LPC_EDIO) ;				// Set EECK,EDIO,EECS output
-+	LPCSetConfig(LDN_GPIO, 0xc8 + LPC_GPIO_SET, iomode);
-+
-+	if(bit_MDO)
-+	{
-+		status = inb_gpio( LPC_GPIO_SET);
-+		status |= LPC_EDIO ;		//EDIO high
-+		outb_gpio(LPC_GPIO_SET, status);
-+	}
-+	else
-+	{
-+		status = inb_gpio( LPC_GPIO_SET);
-+		status &= ~(LPC_EDIO) ;		//EDIO low
-+		outb_gpio(LPC_GPIO_SET, status);
-+	}
-+
-+	status |= LPC_EECK ;		//EECK high
-+	outb_gpio(LPC_GPIO_SET, status);
-+
-+	status &= ~(LPC_EECK) ;		//EECK low
-+	outb_gpio(LPC_GPIO_SET, status);
-+
-+#else
-+    unsigned int addr;
-+    unsigned int value;
-+
-+    addr = GPIO_BASE_ADDR + GPIO_PIN_DIR;
-+    value = readl(addr) | GPIO_MDC | GPIO_MDIO; /* set MDC/MDIO Pin to output */
-+    writel(value,addr);
-+    if(bit_MDO)
-+    {
-+        addr = (GPIO_BASE_ADDR + GPIO_DATA_SET);
-+        writel(GPIO_MDIO,addr); /* set MDIO to 1 */
-+        addr = (GPIO_BASE_ADDR + GPIO_DATA_SET);
-+        writel(GPIO_MDC,addr); /* set MDC to 1 */
-+        addr = (GPIO_BASE_ADDR + GPIO_DATA_CLEAR);
-+        writel(GPIO_MDC,addr); /* set MDC to 0 */
-+    }
-+    else
-+    {
-+        addr = (GPIO_BASE_ADDR + GPIO_DATA_CLEAR);
-+        writel(GPIO_MDIO,addr); /* set MDIO to 0 */
-+        addr = (GPIO_BASE_ADDR + GPIO_DATA_SET);
-+        writel(GPIO_MDC,addr); /* set MDC to 1 */
-+        addr = (GPIO_BASE_ADDR + GPIO_DATA_CLEAR);
-+        writel(GPIO_MDC,addr); /* set MDC to 0 */
-+    }
-+
-+#endif
-+}
-+
-+/**********************************************************************
-+* read a bit from NWay register through CSR9_MDC,MDIO
-+***********************************************************************/
-+unsigned int mii_serial_read(void) // read data from mii PHY
-+{
-+#ifdef CONFIG_SL2312_LPC_IT8712
-+  	unsigned char iomode,status;
-+	unsigned int value ;
-+
-+	iomode = LPCGetConfig(LDN_GPIO, 0xc8 + LPC_GPIO_SET);
-+	iomode &= ~(LPC_EDIO) ;		// Set EDIO input
-+	iomode |= (LPC_EECK) ;		// Set EECK,EECS output
-+	LPCSetConfig(LDN_GPIO, 0xc8 + LPC_GPIO_SET, iomode);
-+
-+	status = inb_gpio( LPC_GPIO_SET);
-+	status |= LPC_EECK ;		//EECK high
-+	outb_gpio(LPC_GPIO_SET, status);
-+
-+	status &= ~(LPC_EECK) ;		//EECK low
-+	outb_gpio(LPC_GPIO_SET, status);
-+
-+	value = inb_gpio( LPC_GPIO_SET);
-+
-+	value = value>>2 ;
-+	value &= 0x01;
-+
-+	return value ;
-+
-+#else
-+    unsigned int *addr;
-+    unsigned int value;
-+
-+    addr = (unsigned int *)(GPIO_BASE_ADDR + GPIO_PIN_DIR);
-+    value = readl(addr) & ~GPIO_MDIO; //0xffbfffff;   /* set MDC to output and MDIO to input */
-+    writel(value,addr);
-+
-+    addr = (unsigned int *)(GPIO_BASE_ADDR + GPIO_DATA_SET);
-+    writel(GPIO_MDC,addr); /* set MDC to 1 */
-+    addr = (unsigned int *)(GPIO_BASE_ADDR + GPIO_DATA_CLEAR);
-+    writel(GPIO_MDC,addr); /* set MDC to 0 */
-+
-+    addr = (unsigned int *)(GPIO_BASE_ADDR + GPIO_DATA_IN);
-+    value = readl(addr);
-+    value = (value & (1<> GPIO_MDIO_PIN;
-+    return(value);
-+
-+#endif
-+}
-+
-+/***************************************
-+* preamble + ST
-+***************************************/
-+void mii_pre_st(void)
-+{
-+    unsigned char i;
-+
-+    for(i=0;i<32;i++) // PREAMBLE
-+        mii_serial_write(1);
-+    mii_serial_write(0); // ST
-+    mii_serial_write(1);
-+}
-+
-+
-+/******************************************
-+* Read MII register
-+* phyad -> physical address
-+* regad -> register address
-+***************************************** */
-+unsigned int mii_read(unsigned char phyad,unsigned char regad)
-+{
-+    unsigned int i,value;
-+    unsigned int bit;
-+
-+    if (phyad == GPHY_ADDR)
-+    {
-+        GPIO_MDC_PIN = G_MDC_PIN;   /* assigned MDC pin for giga PHY */
-+        GPIO_MDIO_PIN = G_MDIO_PIN; /* assigned MDIO pin for giga PHY */
-+    }
-+    else
-+    {
-+        GPIO_MDC_PIN = H_MDC_PIN;   /* assigned MDC pin for 10/100 PHY */
-+        GPIO_MDIO_PIN = H_MDIO_PIN; /* assigned MDIO pin for 10/100 PHY */
-+    }
-+    GPIO_MDC = (1<>(4-i)) & 0x01) ? 1 :0 ;
-+        mii_serial_write(bit);
-+    }
-+
-+    for (i=0;i<5;i++) { // REGAD
-+        bit= ((regad>>(4-i)) & 0x01) ? 1 :0 ;
-+        mii_serial_write(bit);
-+    }
-+
-+    mii_serial_read(); // TA_Z
-+//    if((bit=mii_serial_read()) !=0 ) // TA_0
-+//    {
-+//        return(0);
-+//    }
-+    value=0;
-+    for (i=0;i<16;i++) { // READ DATA
-+        bit=mii_serial_read();
-+        value += (bit<<(15-i)) ;
-+    }
-+
-+    mii_serial_write(0); // dumy clock
-+    mii_serial_write(0); // dumy clock
-+
-+	//printk("%s: phy_addr=0x%x reg_addr=0x%x value=0x%x \n",__func__,phyad,regad,value);
-+    return(value);
-+}
-+
-+/******************************************
-+* Write MII register
-+* phyad -> physical address
-+* regad -> register address
-+* value -> value to be write
-+***************************************** */
-+void mii_write(unsigned char phyad,unsigned char regad,unsigned int value)
-+{
-+    unsigned int i;
-+    char bit;
-+
-+	printk("%s: phy_addr=0x%x reg_addr=0x%x value=0x%x \n",__func__,phyad,regad,value);
-+    if (phyad == GPHY_ADDR)
-+    {
-+        GPIO_MDC_PIN = G_MDC_PIN;   /* assigned MDC pin for giga PHY */
-+        GPIO_MDIO_PIN = G_MDIO_PIN; /* assigned MDIO pin for giga PHY */
-+    }
-+    else
-+    {
-+        GPIO_MDC_PIN = H_MDC_PIN;   /* assigned MDC pin for 10/100 PHY */
-+        GPIO_MDIO_PIN = H_MDIO_PIN; /* assigned MDIO pin for 10/100 PHY */
-+    }
-+    GPIO_MDC = (1<>(4-i)) & 0x01) ? 1 :0 ;
-+        mii_serial_write(bit);
-+    }
-+
-+    for (i=0;i<5;i++) { // REGAD
-+        bit= ((regad>>(4-i)) & 0x01) ? 1 :0 ;
-+        mii_serial_write(bit);
-+    }
-+    mii_serial_write(1); // TA_1
-+    mii_serial_write(0); // TA_0
-+
-+    for (i=0;i<16;i++) { // OUT DATA
-+        bit= ((value>>(15-i)) & 0x01) ? 1 : 0 ;
-+        mii_serial_write(bit);
-+    }
-+    mii_serial_write(0); // dumy clock
-+    mii_serial_write(0); // dumy clock
-+}
-+
-+/*----------------------------------------------------------------------
-+* gmac_set_rx_mode
-+*----------------------------------------------------------------------*/
-+static void gmac_set_rx_mode(struct net_device *dev)
-+{
-+    GMAC_RX_FLTR_T      filter;
-+	unsigned int        mc_filter[2];	/* Multicast hash filter */
-+    int                 bit_nr;
-+	unsigned int        i;
-+	GMAC_INFO_T 		*tp = dev->priv;
-+
-+//    printk("%s : dev->flags = %x \n",__func__,dev->flags);
-+//    dev->flags |= IFF_ALLMULTI;  /* temp */
-+    filter.bits32 = 0;
-+    filter.bits.error = 0;
-+	if (dev->flags & IFF_PROMISC)
-+	{
-+	    filter.bits.error = 1;
-+        filter.bits.promiscuous = 1;
-+        filter.bits.broadcast = 1;
-+        filter.bits.multicast = 1;
-+        filter.bits.unicast = 1;
-+		mc_filter[1] = mc_filter[0] = 0xffffffff;
-+	}
-+	else if (dev->flags & IFF_ALLMULTI)
-+	{
-+//        filter.bits.promiscuous = 1;
-+        filter.bits.broadcast = 1;
-+        filter.bits.multicast = 1;
-+        filter.bits.unicast = 1;
-+		mc_filter[1] = mc_filter[0] = 0xffffffff;
-+	}
-+	else
-+	{
-+		struct dev_mc_list *mclist;
-+
-+//        filter.bits.promiscuous = 1;
-+        filter.bits.broadcast = 1;
-+        filter.bits.multicast = 1;
-+        filter.bits.unicast = 1;
-+		mc_filter[1] = mc_filter[0] = 0;
-+		for (i = 0, mclist = dev->mc_list; mclist && i < dev->mc_count;i++, mclist = mclist->next)
-+		{
-+            bit_nr = ether_crc(ETH_ALEN,mclist->dmi_addr) & 0x0000003f;
-+            if (bit_nr < 32)
-+            {
-+                mc_filter[0] = mc_filter[0] | (1<base_addr,GMAC_RX_FLTR,filter.bits32,0xffffffff);  //chech base address!!!
-+    gmac_write_reg(tp->base_addr,GMAC_MCAST_FIL0,mc_filter[0],0xffffffff);
-+    gmac_write_reg(tp->base_addr,GMAC_MCAST_FIL1,mc_filter[1],0xffffffff);
-+    return;
-+}
-+
-+#ifdef CONFIG_SL_NAPI
-+/*----------------------------------------------------------------------
-+* gmac_rx_poll
-+*----------------------------------------------------------------------*/
-+static int gmac_rx_poll(struct net_device *dev, int *budget)
-+{
-+	TOE_INFO_T			*toe;
-+    GMAC_RXDESC_T   	*curr_desc;
-+	struct sk_buff 		*skb;
-+    DMA_RWPTR_T			rwptr;
-+	unsigned int 		pkt_size;
-+	unsigned int        desc_count;
-+	unsigned int        good_frame, chksum_status, rx_status;
-+	int                 rx_pkts_num = 0;
-+	int                 quota = min(dev->quota, *budget);
-+	GMAC_INFO_T			*tp = (GMAC_INFO_T *)dev->priv;
-+	unsigned int		status4;
-+	volatile DMA_RWPTR_T	fq_rwptr;
-+	int					max_cnt = TOE_SW_FREEQ_DESC_NUM;//TOE_SW_FREEQ_DESC_NUM = 64
-+	//unsigned long		rx_old_bytes;
-+	struct net_device_stats *isPtr = (struct net_device_stats *)&tp->ifStatics;
-+	//unsigned long long	rx_time;
-+
-+
-+
-+#if 1
-+	if (do_again)
-+	{
-+			toe_gmac_fill_free_q();
-+			status4 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_STATUS_4_REG);
-+			fq_rwptr.bits32 = readl(TOE_GLOBAL_BASE + GLOBAL_SWFQ_RWPTR_REG);
-+			//printk("\n%s:: do_again toe_gmac_fill_free_q =======>status4=0x%x =====fq_rwptr =0x%8x======>JKJKJKJKJKJKJKJKJ \n", __func__,status4,fq_rwptr.bits32);
-+			if (fq_rwptr.bits.wptr != fq_rwptr.bits.rptr)
-+			{
-+						//status4 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_STATUS_4_REG);
-+						do_again =0;
-+						//netif_rx_complete(dev);
-+						gmac_write_reg(TOE_GLOBAL_BASE, GLOBAL_INTERRUPT_STATUS_4_REG, status4,	0x1);
-+						fq_rwptr.bits32 = readl(TOE_GLOBAL_BASE + GLOBAL_SWFQ_RWPTR_REG);
-+						rwptr.bits32 = readl(&tp->default_qhdr->word1);
-+			}
-+			else
-+				return 1;
-+	}
-+#endif
-+	rwptr.bits32 = readl(&tp->default_qhdr->word1);
-+#if 0
-+	if (rwptr.bits.rptr != tp->rx_rwptr.bits.rptr)
-+	{
-+		mac_stop_txdma((struct net_device *)tp->dev);
-+		printk("Default Queue HW RD ptr (0x%x) != SW RD Ptr (0x%x)\n",
-+				rwptr.bits32, tp->rx_rwptr.bits.rptr);
-+		while(1);
-+	}
-+#endif
-+	toe = (TOE_INFO_T *)&toe_private_data;
-+
-+	fq_rwptr.bits32 = readl(TOE_GLOBAL_BASE + GLOBAL_SWFQ_RWPTR_REG);
-+	//printk("%s:---Before-------------->Default Queue HW RW ptr (0x%8x),   fq_rwptr =0x%8x \n",__func__,rwptr.bits32,fq_rwptr.bits32 );
-+	//printk("%s:---Before while   rx_pkts_num=%d------rx_finished_idx=0x%x------->Default_Q [rwptr.bits.rptr(SW)=0x%x,   rwptr.bits.wptr(HW) = 0x%x ]---->Free_Q(SW_HW) = 0x%8x \n",__func__,rx_pkts_num,rx_finished_idx,rwptr.bits.rptr,rwptr.bits.wptr,fq_rwptr.bits32 );
-+//	while ((--max_cnt) && (rwptr.bits.rptr != rwptr.bits.wptr) && (rx_pkts_num < quota))
-+
-+	while ((rwptr.bits.rptr != rwptr.bits.wptr) && (rx_pkts_num < quota))
-+	{
-+
-+    	curr_desc = (GMAC_RXDESC_T *)tp->default_desc_base + rwptr.bits.rptr;
-+		tp->default_q_cnt++;
-+    	tp->rx_curr_desc = (unsigned int)curr_desc;
-+    	rx_status = curr_desc->word0.bits.status;
-+    	chksum_status = curr_desc->word0.bits.chksum_status;
-+    	tp->rx_status_cnt[rx_status]++;
-+    	tp->rx_chksum_cnt[chksum_status]++;
-+        pkt_size = curr_desc->word1.bits.byte_count;  /*total byte count in a frame*/
-+		desc_count = curr_desc->word0.bits.desc_count; /* get descriptor count per frame */
-+		good_frame=1;
-+		if ((curr_desc->word0.bits32 & (GMAC_RXDESC_0_T_derr | GMAC_RXDESC_0_T_perr))
-+			|| (pkt_size < 60)
-+		    || (chksum_status & 0x4)
-+		    || rx_status )
-+//			|| rx_status || (rwptr.bits.rptr > rwptr.bits.wptr ))
-+		{
-+			good_frame = 0;
-+			if (curr_desc->word0.bits32 & GMAC_RXDESC_0_T_derr)
-+				printk("%s::derr (GMAC-%d)!!!\n", __func__, tp->port_id);
-+			if (curr_desc->word0.bits32 & GMAC_RXDESC_0_T_perr)
-+				printk("%s::perr (GMAC-%d)!!!\n", __func__, tp->port_id);
-+			if (rx_status)
-+			{
-+				if (rx_status == 4 || rx_status == 7)
-+					isPtr->rx_crc_errors++;
-+//				printk("%s::Status=%d (GMAC-%d)!!!\n", __func__, rx_status, tp->port_id);
-+			}
-+#ifdef SL351x_GMAC_WORKAROUND
-+			else if (pkt_size < 60)
-+			{
-+				if (tp->short_frames_cnt < GMAC_SHORT_FRAME_THRESHOLD)
-+					tp->short_frames_cnt++;
-+				if (tp->short_frames_cnt >= GMAC_SHORT_FRAME_THRESHOLD)
-+				{
-+					GMAC_CONFIG0_T config0;
-+					config0.bits32 = readl(TOE_GMAC0_BASE+GMAC_CONFIG0);
-+					config0.bits.dis_rx = 1;
-+					writel(config0.bits32, TOE_GMAC0_BASE+GMAC_CONFIG0);
-+					config0.bits32 = readl(TOE_GMAC1_BASE+GMAC_CONFIG0);
-+					config0.bits.dis_rx = 1;
-+					writel(config0.bits32, TOE_GMAC1_BASE+GMAC_CONFIG0);
-+				}
-+			}
-+#endif
-+//			if (chksum_status)
-+//				printk("%s::Checksum Status=%d (GMAC-%d)!!!\n", __func__, chksum_status, tp->port_id);
-+			skb = (struct sk_buff *)(REG32(__va(curr_desc->word2.buf_adr) - SKB_RESERVE_BYTES));
-+			dev_kfree_skb_irq(skb);
-+		}
-+		if (good_frame)
-+		{
-+			if (curr_desc->word0.bits.drop)
-+				printk("%s::Drop (GMAC-%d)!!!\n", __func__, tp->port_id);
-+//			if (chksum_status)
-+//				printk("%s::Checksum Status=%d (GMAC-%d)!!!\n", __func__, chksum_status, tp->port_id);
-+
-+#ifdef SL351x_GMAC_WORKAROUND
-+			if (tp->short_frames_cnt >= GMAC_SHORT_FRAME_THRESHOLD)
-+			{
-+				GMAC_CONFIG0_T config0;
-+				config0.bits32 = readl(TOE_GMAC0_BASE+GMAC_CONFIG0);
-+				config0.bits.dis_rx = 0;
-+				writel(config0.bits32, TOE_GMAC0_BASE+GMAC_CONFIG0);
-+				config0.bits32 = readl(TOE_GMAC1_BASE+GMAC_CONFIG0);
-+				config0.bits.dis_rx = 0;
-+				writel(config0.bits32, TOE_GMAC1_BASE+GMAC_CONFIG0);
-+			}
-+			tp->short_frames_cnt = 0;
-+#endif
-+	    	/* get frame information from the first descriptor of the frame */
-+			isPtr->rx_packets++;
-+			//consistent_sync((void *)__va(curr_desc->word2.buf_adr), pkt_size, PCI_DMA_FROMDEVICE);
-+			skb = (struct sk_buff *)(REG32(__va(curr_desc->word2.buf_adr) - SKB_RESERVE_BYTES));
-+			tp->curr_rx_skb = skb;
-+	//		curr_desc->word2.buf_adr = 0;
-+
-+		    //skb_reserve (skb, SKB_RESERVE_BYTES);
-+			skb_reserve (skb, RX_INSERT_BYTES);	/* 2 byte align the IP fields. */
-+			//if ((skb->tail+pkt_size) > skb->end )
-+			//printk("%s::------------->Here skb->len=%d,pkt_size= %d,skb->head=0x%x,skb->tail= 0x%x, skb->end= 0x%x\n", __func__, skb->len, pkt_size,skb->head,skb->tail,skb->end);
-+			skb_put(skb, pkt_size);
-+
-+
-+			skb->dev = dev;
-+			if (chksum_status == RX_CHKSUM_IP_UDP_TCP_OK)
-+			{
-+				skb->ip_summed = CHECKSUM_UNNECESSARY;
-+#ifdef CONFIG_SL351x_NAT
-+				if (nat_cfg.enabled && curr_desc->word3.bits.l3_offset && curr_desc->word3.bits.l4_offset)
-+				{
-+					struct iphdr	*ip_hdr;
-+					ip_hdr = (struct iphdr *)&(skb->data[curr_desc->word3.bits.l3_offset]);
-+					sl351x_nat_input(skb,
-+									tp->port_id,
-+									(void *)curr_desc->word3.bits.l3_offset,
-+								  	(void *)curr_desc->word3.bits.l4_offset);
-+				}
-+#endif
-+				skb->protocol = eth_type_trans(skb,dev); /* set skb protocol */
-+#if 0
-+#ifdef CONFIG_SL351x_RXTOE
-+				if (storlink_ctl.rx_max_pktsize) {
-+					struct iphdr	*ip_hdr;
-+					struct tcphdr	*tcp_hdr;
-+					int ip_hdrlen;
-+
-+ 					ip_hdr = (struct iphdr*)&(skb->data[0]);
-+					if ((skb->protocol == __constant_htons(ETH_P_IP)) &&
-+					   ((ip_hdr->protocol & 0x00ff) == IPPROTO_TCP)) {
-+						ip_hdrlen = ip_hdr->ihl << 2;
-+						tcp_hdr = (struct tcphdr*)&(skb->data[ip_hdrlen]);
-+						if (tcp_hdr->syn) {
-+							struct toe_conn* connection = init_toeq(ip_hdr->version,
-+									ip_hdr, tcp_hdr, toe, &(skb->data[0]) - 14);
-+							TCP_SKB_CB(skb)->connection = connection;
-+							//	hash_dump_entry(TCP_SKB_CB(skb)->connection->hash_entry_index);
-+							//		printk("%s::skb data %x, conn %x, mode %x\n",
-+							//			__func__, skb->data, connection, connection->mode);
-+						}
-+					}
-+				}
-+#endif
-+#endif
-+			}
-+			else if (chksum_status == RX_CHKSUM_IP_OK_ONLY)
-+			{
-+				skb->ip_summed = CHECKSUM_UNNECESSARY;
-+#ifdef CONFIG_SL351x_NAT
-+				if (nat_cfg.enabled && curr_desc->word3.bits.l3_offset && curr_desc->word3.bits.l4_offset)
-+				{
-+					struct iphdr	*ip_hdr;
-+					ip_hdr = (struct iphdr *)&(skb->data[curr_desc->word3.bits.l3_offset]);
-+					if (ip_hdr->protocol == IPPROTO_UDP)
-+					{
-+						sl351x_nat_input(skb,
-+										tp->port_id,
-+										(void *)curr_desc->word3.bits.l3_offset,
-+								  		(void *)curr_desc->word3.bits.l4_offset);
-+					}
-+					else if (ip_hdr->protocol == IPPROTO_GRE)
-+					{
-+						sl351x_nat_input(skb,
-+									tp->port_id,
-+									(void *)curr_desc->word3.bits.l3_offset,
-+								  	(void *)curr_desc->word3.bits.l4_offset);
-+					}
-+				}
-+#endif
-+				skb->protocol = eth_type_trans(skb,dev); /* set skb protocol */
-+			}
-+			else
-+			{
-+				skb->protocol = eth_type_trans(skb,dev); /* set skb protocol */
-+			}
-+			//netif_rx(skb);  /* socket rx */
-+			netif_receive_skb(skb); //For NAPI
-+			dev->last_rx = jiffies;
-+
-+			isPtr->rx_bytes += pkt_size;
-+			//printk("------------------->isPtr->rx_bytes = %d\n",isPtr->rx_bytes);
-+
-+
-+        }
-+		// advance one for Rx default Q 0/1
-+		rwptr.bits.rptr = RWPTR_ADVANCE_ONE(rwptr.bits.rptr, tp->default_desc_num);
-+		SET_RPTR(&tp->default_qhdr->word1, rwptr.bits.rptr);
-+     	tp->rx_rwptr.bits32 = rwptr.bits32;
-+		rx_pkts_num++;
-+		//rwptr.bits32 = readl(&tp->default_qhdr->word1);//try read default_qhdr again
-+		//fq_rwptr.bits32 = readl(TOE_GLOBAL_BASE + GLOBAL_SWFQ_RWPTR_REG);
-+		//printk("%s:---Loop  -------->rx_pkts_num=%d------------>Default Queue HW RW ptr = (0x%8x),   fq_rwptr =0x%8x \n",__func__,rx_pkts_num,rwptr.bits32,fq_rwptr.bits32 );
-+#if 0
-+		if ((status4 & 0x1) == 0)
-+		{
-+			//if (!((dev->last_rx <= (rx_time + 2)) &&  (isPtr->rx_bytes > (rx_old_bytes + 1000000 ))))
-+			if (tp->total_q_cnt_napi < 1024)
-+			{
-+				tp->total_q_cnt_napi++;
-+				toe_gmac_fill_free_q();  //for iperf test disable
-+			}
-+			//else
-+				//printk("%s:---isPtr->rx_bytes =%u , rx_old_bytes =%u\n",__func__,isPtr->rx_bytes,rx_old_bytes );
-+
-+		}
-+#endif
-+		//rwptr.bits.rptr = RWPTR_ADVANCE_ONE(rwptr.bits.rptr, tp->default_desc_num);
-+		//printk("%s:---Loop  -------->rx_pkts_num=%d----rwptr.bits.rptr=0x%x-------->Default Queue HW RW ptr = (0x%8x),   fq_rwptr =0x%8x \n",__func__,rx_pkts_num,rwptr.bits.rptr,rwptr.bits32,fq_rwptr.bits32 );
-+		//printk("%s:---Loop  rx_pkts_num=%d------rwptr.bits.rptr=0x%x------->Default_Q [rwptr.bits.rptr(SW)=0x%x,   rwptr.bits.wptr(HW) = 0x%x ]---->Free_Q(SW_HW) = 0x%8x \n",__func__,rx_pkts_num,rwptr.bits.rptr,rwptr.bits.rptr,rwptr.bits.wptr,fq_rwptr.bits32 );
-+	}
-+	// advance one for Rx default Q 0/1
-+
-+		//rwptr.bits.rptr = RWPTR_ADVANCE_ONE(rwptr.bits.rptr, tp->default_desc_num);
-+		//SET_RPTR(&tp->default_qhdr->word1, rwptr.bits.rptr);
-+     	//tp->rx_rwptr.bits32 = rwptr.bits32;
-+     	//rwptr.bits.rptr = rwptr.bits.rptr;
-+
-+	dev->quota -= rx_pkts_num;
-+	*budget -= rx_pkts_num;
-+
-+	status4 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_STATUS_4_REG);//try read SWFQ empty again
-+	//fq_rwptr.bits32 = readl(TOE_GLOBAL_BASE + GLOBAL_SWFQ_RWPTR_REG);
-+	rwptr.bits32 = readl(&tp->default_qhdr->word1); //try read default_qhdr again
-+	//printk("%s:---After    rx_pkts_num=%d------rwptr.bits.rptr=0x%x------->Default_Q [rwptr.bits.rptr(SW)=0x%x,   rwptr.bits.wptr(HW) = 0x%x ]---->Free_Q(SW_HW) = 0x%8x \n",__func__,rx_pkts_num,rwptr.bits.rptr,rwptr.bits.rptr,rwptr.bits.wptr,fq_rwptr.bits32 );
-+//	if (rwptr.bits.rptr > rwptr.bits.wptr )
-+//			{
-+				//toe_gmac_disable_rx(dev);
-+				//wait_event_interruptible_timeout(freeq_wait,
-+					//(rx_pkts_num == 100), CMTP_INTEROP_TIMEOUT);
-+				//printk("\n%s:: return 22222=======> rx_pkts_num =%d,   rwptr.bits.rptr=%d,   rwptr.bits.wptr = %d ====---------=======>JKJKJKJKJK\n",
-+					//__func__,rx_pkts_num,rwptr.bits.rptr,rwptr.bits.wptr);
-+//				return 1;
-+//			}
-+
-+	if (rwptr.bits.rptr == rwptr.bits.wptr)
-+	{
-+		unsigned int data32;
-+			//printk("%s:---[rwptr.bits.rptr == rwptr.bits.wptr]   rx_pkts_num=%d------rwptr.bits.rptr=0x%x------->Default_Q [rwptr.bits.rptr(SW)=0x%x,   rwptr.bits.wptr(HW) = 0x%x ]---->Free_Q(SW_HW) = 0x%8x \n",__func__,rx_pkts_num,rwptr.bits.rptr,rwptr.bits.rptr,rwptr.bits.wptr,fq_rwptr.bits32 );
-+
-+	    /* Receive descriptor is empty now */
-+#if 1
-+     if (status4 & 0x1)
-+   			{
-+   				do_again =1;
-+   				//writel(0x40400000, TOE_GLOBAL_BASE+GLOBAL_INTERRUPT_ENABLE_4_REG); //disable SWFQ empty interrupt
-+   				//toe_gmac_disable_interrupt(tp->irq);
-+   				tp->sw_fq_empty_cnt++;
-+   				//toe_gmac_disable_rx(dev);
-+   				writel(0x07960202, TOE_GMAC0_BASE+GMAC_CONFIG0);
-+				writel(0x07960202, TOE_GMAC1_BASE+GMAC_CONFIG0);
-+   				//printk("\n%s ::  freeq int-----tp->sw_fq_empty_cnt  =%d---------====================----------------->\n",__func__,tp->sw_fq_empty_cnt);
-+   				//while ((fq_rwptr.bits.wptr >= (fq_rwptr.bits.rptr+256)) || (fq_rwptr.bits.wptr <= (fq_rwptr.bits.rptr+256)))
-+   				//{
-+   					//gmac_write_reg(TOE_GLOBAL_BASE, GLOBAL_INTERRUPT_STATUS_4_REG, status4,
-+					//0x1);
-+				//printk("\n%s::fq_rwptr.wrptr = %x =======> ===========>here \n", __func__,fq_rwptr.bits32);
-+				//if ((status4 & 0x1) == 0)
-+					//break;
-+				 return 1;
-+				//}
-+
-+			}
-+#endif
-+        //toe_gmac_fill_free_q();
-+        netif_rx_complete(dev);
-+        // enable GMAC-0 rx interrupt
-+        // class-Q & TOE-Q are implemented in future
-+        //data32 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_1_REG);
-+        //if (tp->port_id == 0)
-+        	//data32 |= DEFAULT_Q0_INT_BIT;
-+        //else
-+        	//data32 |= DEFAULT_Q1_INT_BIT;
-+        //writel(data32, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_1_REG);
-+		writel(0x3, TOE_GLOBAL_BASE+GLOBAL_INTERRUPT_ENABLE_1_REG);
-+		//printk("\n%s::netif_rx_complete-->  rx_pkts_num =%d,   rwptr.bits.rptr=0x%x,   rwptr.bits.wptr = 0x%x ====---------=======>JKJKJKJKJK\n",
-+		//__func__,rx_pkts_num,rwptr.bits.rptr,rwptr.bits.wptr);
-+        writel(0x07960200, TOE_GMAC0_BASE+GMAC_CONFIG0);
-+		writel(0x07960200, TOE_GMAC1_BASE+GMAC_CONFIG0);
-+        return 0;
-+    }
-+    else
-+    {
-+        //printk("\n%s:: return 1 -->status4= 0x%x,rx_pkts_num =%d,   rwptr.bits.rptr=0x%x,   rwptr.bits.wptr = 0x%x  ======> \n", __func__,status4,rx_pkts_num,rwptr.bits.rptr,rwptr.bits.wptr);
-+        return 1;
-+    }
-+}
-+#endif
-+
-+/*----------------------------------------------------------------------
-+* gmac_tx_timeout
-+*----------------------------------------------------------------------*/
-+void gmac_tx_timeout(struct net_device *dev)
-+{
-+	GMAC_INFO_T				*tp = (GMAC_INFO_T *)dev->priv;
-+
-+#ifdef CONFIG_SL351x_SYSCTL
-+	if (tp->operation && storlink_ctl.link[tp->port_id])
-+#else
-+	if (tp->operation)
-+#endif
-+	{
-+		netif_wake_queue(dev);
-+	}
-+}
-+
-+
-+
-+/*----------------------------------------------------------------------
-+* mac_set_rule_reg
-+*----------------------------------------------------------------------*/
-+int mac_set_rule_reg(int mac, int rule, int enabled, u32 reg0, u32 reg1, u32 reg2)
-+{
-+	int		total_key_dwords;
-+
-+	total_key_dwords = 1;
-+
-+	if (reg0 & MR_L2_BIT)
-+	{
-+		if (reg0 & MR_DA_BIT) total_key_dwords += 2;
-+		if (reg0 & MR_SA_BIT) total_key_dwords += 2;
-+		if ((reg0 & MR_DA_BIT) && ( reg0 & MR_SA_BIT)) total_key_dwords--;
-+		if (reg0 & (MR_PPPOE_BIT | MR_VLAN_BIT)) total_key_dwords++;
-+	}
-+	if (reg0 & MR_L3_BIT)
-+	{
-+		if (reg0 & (MR_IP_HDR_LEN_BIT | MR_TOS_TRAFFIC_BIT | MR_SPR_BITS))
-+			total_key_dwords++;
-+		if (reg0 & MR_FLOW_LABLE_BIT) total_key_dwords++;
-+		if ((reg0 & MR_IP_VER_BIT) == 0) // IPv4
-+		{
-+			if (reg1 & 0xff000000) total_key_dwords += 1;
-+			if (reg1 & 0x00ff0000) total_key_dwords += 1;
-+		}
-+		else
-+		{
-+			if (reg1 & 0xff000000) total_key_dwords += 4;
-+			if (reg1 & 0x00ff0000) total_key_dwords += 4;
-+		}
-+	}
-+	if (reg0 & MR_L4_BIT)
-+	{
-+		if (reg1 & 0x0000f000) total_key_dwords += 1;
-+		if (reg1 & 0x00000f00) total_key_dwords += 1;
-+		if (reg1 & 0x000000f0) total_key_dwords += 1;
-+		if (reg1 & 0x0000000f) total_key_dwords += 1;
-+		if (reg2 & 0xf0000000) total_key_dwords += 1;
-+		if (reg2 & 0x0f000000) total_key_dwords += 1;
-+	}
-+	if (reg0 & MR_L7_BIT)
-+	{
-+		if (reg2 & 0x00f00000) total_key_dwords += 1;
-+		if (reg2 & 0x000f0000) total_key_dwords += 1;
-+		if (reg2 & 0x0000f000) total_key_dwords += 1;
-+		if (reg2 & 0x00000f00) total_key_dwords += 1;
-+		if (reg2 & 0x000000f0) total_key_dwords += 1;
-+		if (reg2 & 0x0000000f) total_key_dwords += 1;
-+	}
-+
-+	if (total_key_dwords > HASH_MAX_KEY_DWORD)
-+		return -1;
-+
-+	if (total_key_dwords == 0 && enabled)
-+		return -2;
-+
-+	mac_set_rule_enable_bit(mac, rule, 0);
-+	if (enabled)
-+	{
-+		mac_set_MRxCRx(mac, rule, 0, reg0);
-+		mac_set_MRxCRx(mac, rule, 1, reg1);
-+		mac_set_MRxCRx(mac, rule, 2, reg2);
-+		mac_set_rule_action(mac, rule, total_key_dwords);
-+		mac_set_rule_enable_bit(mac, rule, enabled);
-+	}
-+	else
-+	{
-+		mac_set_rule_action(mac, rule, 0);
-+	}
-+	return total_key_dwords;
-+}
-+
-+/*----------------------------------------------------------------------
-+* mac_get_rule_enable_bit
-+*----------------------------------------------------------------------*/
-+int mac_get_rule_enable_bit(int mac, int rule)
-+{
-+	switch (rule)
-+	{
-+		case 0: return ((mac_read_dma_reg(mac, GMAC_HASH_ENGINE_REG0) >> 15) & 1);
-+		case 1: return ((mac_read_dma_reg(mac, GMAC_HASH_ENGINE_REG0) >> 31) & 1);
-+		case 2: return ((mac_read_dma_reg(mac, GMAC_HASH_ENGINE_REG1) >> 15) & 1);
-+		case 3: return ((mac_read_dma_reg(mac, GMAC_HASH_ENGINE_REG1) >> 31) & 1);
-+		default: return 0;
-+	}
-+}
-+
-+/*----------------------------------------------------------------------
-+* mac_set_rule_enable_bit
-+*----------------------------------------------------------------------*/
-+void mac_set_rule_enable_bit(int mac, int rule, int data)
-+{
-+	u32 reg;
-+
-+	if (data & ~1)
-+		return;
-+
-+	switch (rule)
-+	{
-+		case 0:
-+			reg = (mac_read_dma_reg(mac, GMAC_HASH_ENGINE_REG0) & ~(1<<15)) | (data << 15);
-+			mac_write_dma_reg(mac, GMAC_HASH_ENGINE_REG0, reg);
-+			break;
-+		case 1:
-+			reg = (mac_read_dma_reg(mac, GMAC_HASH_ENGINE_REG0) & ~(1<<31)) | (data << 31);
-+			mac_write_dma_reg(mac, GMAC_HASH_ENGINE_REG0, reg);
-+			break;
-+		case 2:
-+			reg = (mac_read_dma_reg(mac, GMAC_HASH_ENGINE_REG1) & ~(1<<15)) | (data << 15);
-+			mac_write_dma_reg(mac, GMAC_HASH_ENGINE_REG1, reg);
-+			break;
-+		case 3:
-+			reg = (mac_read_dma_reg(mac, GMAC_HASH_ENGINE_REG1) & ~(1<<31)) | (data << 31);
-+			mac_write_dma_reg(mac, GMAC_HASH_ENGINE_REG1, reg);
-+	}
-+}
-+
-+/*----------------------------------------------------------------------
-+* mac_set_rule_action
-+*----------------------------------------------------------------------*/
-+int mac_set_rule_action(int mac, int rule, int data)
-+{
-+	u32 reg;
-+
-+	if (data > 32)
-+		return -1;
-+
-+	if (data)
-+		data = (data << 6) | (data + HASH_ACTION_DWORDS);
-+	switch (rule)
-+	{
-+		case 0:
-+			reg = (mac_read_dma_reg(mac, GMAC_HASH_ENGINE_REG0) & ~(0x7ff));
-+			mac_write_dma_reg(mac, GMAC_HASH_ENGINE_REG0, reg | data);
-+			break;
-+		case 1:
-+			reg = (mac_read_dma_reg(mac, GMAC_HASH_ENGINE_REG0) & ~(0x7ff<<16));
-+			mac_write_dma_reg(mac, GMAC_HASH_ENGINE_REG0, reg | (data << 16));
-+			break;
-+		case 2:
-+			reg = (mac_read_dma_reg(mac, GMAC_HASH_ENGINE_REG1) & ~(0x7ff));
-+			mac_write_dma_reg(mac, GMAC_HASH_ENGINE_REG1,  reg | data);
-+			break;
-+		case 3:
-+			reg = (mac_read_dma_reg(mac, GMAC_HASH_ENGINE_REG1) & ~(0x7ff<<16));
-+			mac_write_dma_reg(mac, GMAC_HASH_ENGINE_REG1, reg | (data << 16));
-+			break;
-+		default:
-+			return -1;
-+	}
-+
-+	return 0;
-+}
-+/*----------------------------------------------------------------------
-+* mac_get_MRxCRx
-+*----------------------------------------------------------------------*/
-+int mac_get_MRxCRx(int mac, int rule, int ctrlreg)
-+{
-+	int reg;
-+
-+	switch (rule)
-+	{
-+		case 0: reg = GMAC_MR0CR0 + ctrlreg * 4; break;
-+		case 1: reg = GMAC_MR1CR0 + ctrlreg * 4; break;
-+		case 2: reg = GMAC_MR2CR0 + ctrlreg * 4; break;
-+		case 3: reg = GMAC_MR3CR0 + ctrlreg * 4; break;
-+		default: return 0;
-+	}
-+	return mac_read_dma_reg(mac, reg);
-+}
-+
-+/*----------------------------------------------------------------------
-+* mac_set_MRxCRx
-+*----------------------------------------------------------------------*/
-+void mac_set_MRxCRx(int mac, int rule, int ctrlreg, u32 data)
-+{
-+	int reg;
-+
-+	switch (rule)
-+	{
-+		case 0: reg = GMAC_MR0CR0 + ctrlreg * 4; break;
-+		case 1: reg = GMAC_MR1CR0 + ctrlreg * 4; break;
-+		case 2: reg = GMAC_MR2CR0 + ctrlreg * 4; break;
-+		case 3: reg = GMAC_MR3CR0 + ctrlreg * 4; break;
-+		default: return;
-+	}
-+	mac_write_dma_reg(mac, reg, data);
-+}
-+
-+/*----------------------------------------------------------------------
-+* mac_set_rule_priority
-+*----------------------------------------------------------------------*/
-+void mac_set_rule_priority(int mac, int p0, int p1, int p2, int p3)
-+{
-+	int 			i;
-+	GMAC_MRxCR0_T	reg[4];
-+
-+	for (i=0; i<4; i++)
-+		reg[i].bits32 = mac_get_MRxCRx(mac, i, 0);
-+
-+	reg[0].bits.priority = p0;
-+	reg[1].bits.priority = p1;
-+	reg[2].bits.priority = p2;
-+	reg[3].bits.priority = p3;
-+
-+	for (i=0; i<4; i++)
-+		mac_set_MRxCRx(mac, i, 0, reg[i].bits32);
-+}
-+
-+/*----------------------------------------------------------------------
-+* gmac_netdev_ioctl
-+*----------------------------------------------------------------------*/
-+static int gmac_netdev_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
-+{
-+	int 				rc = 0;
-+    unsigned char		*hwa = rq->ifr_ifru.ifru_hwaddr.sa_data;
-+
-+#ifdef br_if_ioctl
-+    struct 				ethtool_cmd ecmd; 	//br_if.c will call this ioctl
-+	GMAC_INFO_T 		*tp = dev->priv;
-+#endif
-+
-+#ifdef 	CONFIG_SL351x_NAT
-+	if (cmd == SIOCDEVPRIVATE)
-+		return sl351x_nat_ioctl(dev, rq, cmd);
-+#endif
-+
-+	switch (cmd) {
-+	case SIOCETHTOOL:
-+#ifdef br_if_ioctl  	//br_if.c will call this ioctl
-+		if (!netif_running(dev))
-+		{
-+			printk("Before changing the H/W address,please down the device.\n");
-+			return -EINVAL;
-+		}
-+		memset((void *) &ecmd, 0, sizeof (ecmd));
-+           	    ecmd.supported =
-+                	SUPPORTED_Autoneg | SUPPORTED_TP | SUPPORTED_MII |
-+                    SUPPORTED_10baseT_Half | SUPPORTED_10baseT_Full |
-+                    SUPPORTED_100baseT_Half | SUPPORTED_100baseT_Full;
-+         		    ecmd.port = PORT_TP;
-+            	    ecmd.transceiver = XCVR_EXTERNAL;
-+            	    ecmd.phy_address = tp->phy_addr;
-+            	    switch (tp->speed_status)
-+            	    {
-+            	    case GMAC_SPEED_10: ecmd.speed = SPEED_10; break;
-+             	    case GMAC_SPEED_100: ecmd.speed = SPEED_100; break;
-+            	    case GMAC_SPEED_1000: ecmd.speed = SPEED_1000; break;
-+            	    default: ecmd.speed = SPEED_10; break;
-+            	   }
-+            	    ecmd.duplex = tp->full_duplex_status ? DUPLEX_FULL : DUPLEX_HALF;
-+            	    ecmd.advertising = ADVERTISED_TP;
-+            	    ecmd.advertising |= ADVERTISED_Autoneg;
-+           	    ecmd.autoneg = AUTONEG_ENABLE;
-+                    if (copy_to_user(rq->ifr_data, &ecmd, sizeof (ecmd)))
-+                  	return -EFAULT;
-+#endif
-+
-+        break;
-+
-+    case SIOCSIFHWADDR:
-+		if (!netif_running(dev))
-+		{
-+			printk("Before changing the H/W address,please down the device.\n");
-+			return -EINVAL;
-+		}
-+        gmac_set_mac_address(dev,hwa);
-+        break;
-+
-+	case SIOCGMIIPHY:	/* Get the address of the PHY in use. */
-+        break;
-+
-+	case SIOCGMIIREG:	/* Read the specified MII register. */
-+		break;
-+
-+	case SIOCSMIIREG:	/* Write the specified MII register */
-+		break;
-+
-+	default:
-+		rc = -EOPNOTSUPP;
-+		break;
-+	}
-+
-+	return rc;
-+}
-+
-+#ifdef SL351x_GMAC_WORKAROUND
-+
-+#define GMAC_TX_STATE_OFFSET	0x60
-+#define GMAC_RX_STATE_OFFSET	0x64
-+#define GMAC_POLL_HANGED_NUM	200
-+#define GMAC_RX_HANGED_STATE	0x4b2000
-+#define GMAC_RX_HANGED_MASK		0xdff000
-+#define GMAC_TX_HANGED_STATE	0x34012
-+#define GMAC_TX_HANGED_MASK		0xfffff
-+#define TOE_GLOBAL_REG_SIZE		(0x78/sizeof(u32))
-+#define TOE_DMA_REG_SIZE		(0xd0/sizeof(u32))
-+#define TOE_GMAC_REG_SIZE		(0x30/sizeof(u32))
-+#define GMAC0_RX_HANG_BIT		(1 << 0)
-+#define GMAC0_TX_HANG_BIT		(1 << 1)
-+#define GMAC1_RX_HANG_BIT		(1 << 2)
-+#define GMAC1_TX_HANG_BIT		(1 << 3)
-+
-+int		gmac_in_do_workaround;
-+#if 0
-+int		debug_cnt, poll_max_cnt;
-+#endif
-+u32		gmac_workaround_cnt[4];
-+u32		toe_global_reg[TOE_GLOBAL_REG_SIZE];
-+u32		toe_dma_reg[GMAC_NUM][TOE_DMA_REG_SIZE];
-+u32		toe_gmac_reg[GMAC_NUM][TOE_GMAC_REG_SIZE];
-+u32		gmac_short_frame_workaround_cnt[2];
-+
-+static void sl351x_gmac_release_buffers(void);
-+static void sl351x_gmac_release_swtx_q(void);
-+static void sl351x_gmac_release_rx_q(void);
-+#ifdef _TOEQ_CLASSQ_READY_
-+static void sl351x_gmac_release_class_q(void);
-+static void sl351x_gmac_release_toe_q(void);
-+static void sl351x_gmac_release_intr_q(void);
-+#endif
-+static void sl351x_gmac_release_sw_free_q(void);
-+static void sl351x_gmac_release_hw_free_q(void);
-+#ifdef CONFIG_SL351x_NAT
-+static int get_free_desc_cnt(unsigned long rwptr, int total);
-+static void sl351x_gmac_release_hwtx_q(void);
-+u32     sl351x_nat_workaround_cnt;
-+#endif
-+void sl351x_gmac_save_reg(void);
-+void sl351x_gmac_restore_reg(void);
-+
-+
-+/*----------------------------------------------------------------------
-+* 	sl351x_poll_gmac_hanged_status
-+* 	- Called by timer routine, period 10ms
-+*	- If (state != 0 && state == prev state && )
-+*----------------------------------------------------------------------*/
-+void sl351x_poll_gmac_hanged_status(u32 data)
-+{
-+	int 			i;
-+	u32 			state;
-+	TOE_INFO_T		*toe;
-+	GMAC_INFO_T		*tp;
-+	u32				hanged_state;
-+	// int				old_operation[GMAC_NUM];
-+#ifdef CONFIG_SL351x_NAT
-+	u32				hw_free_cnt;
-+#endif
-+
-+	if (gmac_in_do_workaround)
-+		return;
-+
-+	gmac_in_do_workaround = 1;
-+
-+	toe = (TOE_INFO_T *)&toe_private_data;
-+	hanged_state = 0;
-+
-+#ifdef SL351x_TEST_WORKAROUND
-+	if (toe->gmac[0].operation || toe->gmac[1].operation)
-+	{
-+		debug_cnt++;
-+		if (debug_cnt == (30 * HZ))
-+		{
-+			debug_cnt = 0;
-+			hanged_state = GMAC0_RX_HANG_BIT;
-+			goto do_workaround;
-+		}
-+	}
-+#endif
-+	if (toe->gmac[0].operation)
-+		hanged_state |= GMAC0_RX_HANG_BIT | GMAC0_TX_HANG_BIT;
-+
-+#if (GMAC_NUM > 1)
-+	if (toe->gmac[1].operation)
-+		hanged_state |= GMAC1_RX_HANG_BIT | GMAC1_TX_HANG_BIT;
-+#endif
-+
-+	for (i=0; i 1)
-+		if (hanged_state & GMAC1_RX_HANG_BIT)
-+		{
-+			state = readl(TOE_GMAC1_BASE + GMAC_RX_STATE_OFFSET) & GMAC_RX_HANGED_MASK;
-+			if (state != GMAC_RX_HANGED_STATE)
-+				hanged_state &= ~GMAC1_RX_HANG_BIT;
-+		}
-+		if (hanged_state & GMAC1_TX_HANG_BIT)
-+		{
-+			state = readl(TOE_GMAC1_BASE + GMAC_TX_STATE_OFFSET) & GMAC_TX_HANGED_MASK;
-+			if (state != GMAC_TX_HANGED_STATE)
-+				hanged_state &= ~GMAC1_TX_HANG_BIT;
-+		}
-+#endif
-+		if (!hanged_state)
-+		{
-+#if 0
-+			if (i < poll_max_cnt)
-+				poll_max_cnt = i;
-+#endif
-+			if (toe->gmac[0].short_frames_cnt >= GMAC_SHORT_FRAME_THRESHOLD)
-+			{
-+				gmac_short_frame_workaround_cnt[0]++;
-+				toe->gmac[0].short_frames_cnt = 0;
-+				goto do_workaround;
-+			}
-+#if (GMAC_NUM > 1)
-+			if (toe->gmac[1].short_frames_cnt >= GMAC_SHORT_FRAME_THRESHOLD)
-+			{
-+				gmac_short_frame_workaround_cnt[1]++;
-+				toe->gmac[1].short_frames_cnt = 0;
-+				goto do_workaround;
-+			}
-+#endif
-+
-+#ifdef CONFIG_SL351x_NAT
-+			hw_free_cnt = readl(TOE_GLOBAL_BASE + GLOBAL_HWFQ_RWPTR_REG);
-+			hw_free_cnt = get_free_desc_cnt(hw_free_cnt, TOE_HW_FREEQ_DESC_NUM);
-+#ifdef NAT_WORKAROUND_BY_RESET_GMAC
-+			if (readl(TOE_GLOBAL_BASE + 0x4084) && (hw_free_cnt <= PAUSE_SET_HW_FREEQ))
-+			{
-+				sl351x_nat_workaround_cnt++;
-+				goto do_workaround;
-+			}
-+#else
-+			if (readl(TOE_GLOBAL_BASE + 0x4084) && (hw_free_cnt <= (PAUSE_SET_HW_FREEQ*2)))
-+			{
-+				sl351x_nat_workaround_cnt++;
-+				sl351x_nat_workaround_handler();
-+			}
-+#endif
-+#endif
-+			gmac_in_do_workaround = 0;
-+			add_timer(&gmac_workround_timer_obj);
-+			return;
-+		}
-+	}
-+
-+do_workaround:
-+
-+	gmac_initialized = 0;
-+	if (hanged_state)
-+	{
-+		if (hanged_state & GMAC0_RX_HANG_BIT) gmac_workaround_cnt[0]++;
-+		if (hanged_state & GMAC0_TX_HANG_BIT) gmac_workaround_cnt[1]++;
-+		if (hanged_state & GMAC1_RX_HANG_BIT) gmac_workaround_cnt[2]++;
-+		if (hanged_state & GMAC1_TX_HANG_BIT) gmac_workaround_cnt[3]++;
-+	}
-+
-+	for (i=0; igmac[i];
-+		// old_operation[i] = tp->operation;
-+		if (tp->operation)
-+		{
-+			netif_stop_queue(tp->dev);
-+			clear_bit(__LINK_STATE_START, &tp->dev->state);
-+			toe_gmac_disable_interrupt(tp->irq);
-+			toe_gmac_disable_tx_rx(tp->dev);
-+			toe_gmac_hw_stop(tp->dev);
-+		}
-+	}
-+
-+	// clear all status bits
-+	writel(0xffffffff, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_STATUS_0_REG);
-+	writel(0xffffffff, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_STATUS_1_REG);
-+	writel(0xffffffff, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_STATUS_2_REG);
-+	writel(0xffffffff, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_STATUS_3_REG);
-+	writel(0xffffffff, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_STATUS_4_REG);
-+
-+#if 0
-+	if ((hanged_state & GMAC0_RX_HANG_BIT) &&
-+		(readl(TOE_GMAC0_DMA_BASE + 0xdc) & 0xf0))
-+	{
-+		struct sk_buff *skb;
-+		unsigned int buf;
-+		buf = readl(TOE_GMAC0_DMA_BASE + 0x68) & ~3;
-+#ifdef CONFIG_SL351x_NAT
-+		if (buf < toe->hwfq_buf_base_dma || buf > toe->hwfq_buf_end_dma)
-+#endif
-+		{
-+			skb = (struct sk_buff *)(REG32(buf - SKB_RESERVE_BYTES));
-+			printk("GMAC-0 free a loss SKB 0x%x\n", (u32)skb);
-+			dev_kfree_skb(skb);
-+		}
-+	}
-+	if ((hanged_state & GMAC1_RX_HANG_BIT)  &&
-+		(readl(TOE_GMAC1_DMA_BASE + 0xdc) & 0xf0))
-+	{
-+		struct sk_buff *skb;
-+		unsigned int buf;
-+		buf = readl(TOE_GMAC1_DMA_BASE + 0x68) & ~3;
-+#ifdef CONFIG_SL351x_NAT
-+		if (buf < toe->hwfq_buf_base_dma || buf > toe->hwfq_buf_end_dma)
-+#endif
-+		{
-+			skb = (struct sk_buff *)(REG32(buf - SKB_RESERVE_BYTES));
-+			printk("GMAC-1 free a loss SKB 0x%x\n", (u32)skb);
-+			dev_kfree_skb(skb);
-+		}
-+	}
-+#endif
-+
-+	sl351x_gmac_release_buffers();
-+	sl351x_gmac_save_reg();
-+	toe_gmac_sw_reset();
-+	sl351x_gmac_restore_reg();
-+
-+	if (toe->gmac[0].default_qhdr->word1.bits32)
-+	{
-+		// printk("===> toe->gmac[0].default_qhdr->word1 = 0x%x\n", toe->gmac[0].default_qhdr->word1);
-+		sl351x_gmac_release_rx_q();
-+		writel(0, &toe->gmac[0].default_qhdr->word1);
-+	}
-+	if (toe->gmac[1].default_qhdr->word1.bits32)
-+	{
-+		// printk("===> toe->gmac[1].default_qhdr->word1 = 0x%x\n", toe->gmac[1].default_qhdr->word1);
-+		sl351x_gmac_release_rx_q();
-+		writel(0, &toe->gmac[1].default_qhdr->word1);
-+	}
-+
-+	gmac_initialized = 1;
-+
-+#ifdef 	CONFIG_SL351x_NAT
-+	writel(0, TOE_GLOBAL_BASE + 0x4084);
-+#endif
-+
-+	for (i=0; igmac[i];
-+ 		if (tp->operation)
-+ 		{
-+			toe_gmac_enable_interrupt(tp->irq);
-+			toe_gmac_hw_start(tp->dev);
-+			toe_gmac_enable_tx_rx(tp->dev);
-+			netif_wake_queue(tp->dev);
-+			set_bit(__LINK_STATE_START, &tp->dev->state);
-+		}
-+	}
-+
-+	gmac_in_do_workaround = 0;
-+	add_timer(&gmac_workround_timer_obj);
-+}
-+
-+/*----------------------------------------------------------------------
-+*	get_free_desc_cnt
-+*----------------------------------------------------------------------*/
-+#ifdef CONFIG_SL351x_NAT
-+static int get_free_desc_cnt(unsigned long rwptr, int total)
-+{
-+	unsigned short wptr = rwptr & 0xffff;
-+	unsigned short rptr = rwptr >> 16;
-+
-+	if (wptr >= rptr)
-+		return (total - wptr + rptr);
-+	else
-+		return (rptr - wptr);
-+}
-+#endif
-+/*----------------------------------------------------------------------
-+* 	sl351x_gmac_release_buffers
-+*----------------------------------------------------------------------*/
-+static void sl351x_gmac_release_buffers(void)
-+{
-+	// Free buffers & Descriptors in all SW Tx Queues
-+	sl351x_gmac_release_swtx_q();
-+
-+	// Free buffers in Default Rx Queues
-+	sl351x_gmac_release_rx_q();
-+
-+#ifdef _TOEQ_CLASSQ_READY_
-+	// Free buffers in Classification Queues
-+	sl351x_gmac_release_class_q();
-+
-+	// Free buffers in TOE Queues
-+	sl351x_gmac_release_toe_q();
-+
-+	// Free buffers in Interrupt Queues
-+	sl351x_gmac_release_intr_q();
-+#endif
-+
-+	// Free buffers & descriptors in SW free queue
-+	sl351x_gmac_release_sw_free_q();
-+
-+	// Free buffers & descriptors in HW free queue
-+	sl351x_gmac_release_hw_free_q();
-+
-+#ifdef CONFIG_SL351x_NAT
-+	// Free buffers & descriptors in HW free queue
-+	sl351x_gmac_release_hwtx_q();
-+#endif
-+}
-+/*----------------------------------------------------------------------
-+* 	sl351x_gmac_release_swtx_q
-+*----------------------------------------------------------------------*/
-+static void sl351x_gmac_release_swtx_q(void)
-+{
-+	int				i, j;
-+	GMAC_TXDESC_T	*curr_desc;
-+	unsigned int	desc_count;
-+	TOE_INFO_T		*toe;
-+	GMAC_INFO_T		*tp;
-+	GMAC_SWTXQ_T	*swtxq;
-+	DMA_RWPTR_T		rwptr;
-+
-+	toe = (TOE_INFO_T *)&toe_private_data;
-+	tp = (GMAC_INFO_T *)&toe->gmac[0];
-+	for (i=0; iexisted) continue;
-+		swtxq = (GMAC_SWTXQ_T *)&tp->swtxq[0];
-+		for (j=0; jrwptr_reg);
-+				if (rwptr.bits.rptr == swtxq->finished_idx)
-+				break;
-+				curr_desc = (GMAC_TXDESC_T *)swtxq->desc_base + swtxq->finished_idx;
-+				// if (curr_desc->word0.bits.status_tx_ok)
-+				{
-+					desc_count = curr_desc->word0.bits.desc_count;
-+					while (--desc_count)
-+					{
-+						curr_desc->word0.bits.status_tx_ok = 0;
-+						swtxq->finished_idx = RWPTR_ADVANCE_ONE(swtxq->finished_idx, swtxq->total_desc_num);
-+						curr_desc = (GMAC_TXDESC_T *)swtxq->desc_base + swtxq->finished_idx;
-+					}
-+
-+					curr_desc->word0.bits.status_tx_ok = 0;
-+					if (swtxq->tx_skb[swtxq->finished_idx])
-+					{
-+						dev_kfree_skb_irq(swtxq->tx_skb[swtxq->finished_idx]);
-+						swtxq->tx_skb[swtxq->finished_idx] = NULL;
-+					}
-+				}
-+				swtxq->finished_idx = RWPTR_ADVANCE_ONE(swtxq->finished_idx, swtxq->total_desc_num);
-+			}
-+			writel(0, swtxq->rwptr_reg);
-+			swtxq->finished_idx = 0;
-+		}
-+	}
-+
-+}
-+/*----------------------------------------------------------------------
-+* 	sl351x_gmac_release_rx_q
-+*----------------------------------------------------------------------*/
-+static void sl351x_gmac_release_rx_q(void)
-+{
-+	int				i;
-+	TOE_INFO_T		*toe;
-+	GMAC_INFO_T		*tp;
-+	DMA_RWPTR_T		rwptr;
-+	volatile GMAC_RXDESC_T	*curr_desc;
-+	struct sk_buff			*skb;
-+
-+	toe = (TOE_INFO_T *)&toe_private_data;
-+	tp = (GMAC_INFO_T *)&toe->gmac[0];
-+	for (i=0; iexisted) continue;
-+		rwptr.bits32 = readl(&tp->default_qhdr->word1);
-+		while (rwptr.bits.rptr != rwptr.bits.wptr)
-+		{
-+			curr_desc = (GMAC_RXDESC_T *)tp->default_desc_base + rwptr.bits.rptr;
-+			skb = (struct sk_buff *)(REG32(__va(curr_desc->word2.buf_adr) - SKB_RESERVE_BYTES));
-+			dev_kfree_skb_irq(skb);
-+			rwptr.bits.rptr = RWPTR_ADVANCE_ONE(rwptr.bits.rptr, tp->default_desc_num);
-+			SET_RPTR(&tp->default_qhdr->word1, rwptr.bits.rptr);
-+			rwptr.bits32 = readl(&tp->default_qhdr->word1);
-+		}  // while
-+		writel(0, &tp->default_qhdr->word1);
-+		tp->rx_rwptr.bits32 = 0;
-+	} // for
-+
-+}
-+/*----------------------------------------------------------------------
-+* 	sl351x_gmac_release_class_q
-+*----------------------------------------------------------------------*/
-+#ifdef _TOEQ_CLASSQ_READY_
-+static void sl351x_gmac_release_class_q(void)
-+{
-+	int				i;
-+	TOE_INFO_T		*toe;
-+	CLASSQ_INFO_T	*classq;
-+	DMA_RWPTR_T		rwptr;
-+	volatile GMAC_RXDESC_T	*curr_desc;
-+	struct sk_buff			*skb;
-+
-+	toe = (TOE_INFO_T *)&toe_private_data;
-+	classq = (CLASSQ_INFO_T *)&toe->classq[0];
-+	for (i=0; iqhdr->word1);
-+		while (rwptr.bits.rptr != rwptr.bits.wptr)
-+		{
-+			curr_desc = (GMAC_RXDESC_T *)classq->desc_base + rwptr.bits.rptr;
-+			skb = (struct sk_buff *)(REG32(__va(curr_desc->word2.buf_adr) - SKB_RESERVE_BYTES));
-+			dev_kfree_skb_irq(skb);
-+			rwptr.bits.rptr = RWPTR_ADVANCE_ONE(rwptr.bits.rptr, classq->desc_num);
-+			SET_RPTR(&classq->qhdr->word1, rwptr.bits.rptr);
-+			rwptr.bits32 = readl(&classq->qhdr->word1);
-+		}  // while
-+		writel(0, &classq->qhdr->word1);
-+		classq->rwptr.bits32 = 0;
-+	} // for
-+
-+}
-+#endif
-+/*----------------------------------------------------------------------
-+* 	sl351x_gmac_release_toe_q
-+*----------------------------------------------------------------------*/
-+#ifdef _TOEQ_CLASSQ_READY_
-+static void sl351x_gmac_release_toe_q(void)
-+{
-+	int				i;
-+	TOE_INFO_T		*toe;
-+	TOEQ_INFO_T		*toeq_info;
-+	TOE_QHDR_T		*toe_qhdr;
-+	DMA_RWPTR_T		rwptr;
-+	volatile GMAC_RXDESC_T	*curr_desc;
-+	unsigned int	rptr, wptr;
-+	GMAC_RXDESC_T	*toe_curr_desc;
-+	struct sk_buff			*skb;
-+
-+	toe = (TOE_INFO_T *)&toe_private_data;
-+	toe_qhdr = (TOE_QHDR_T *)TOE_TOE_QUE_HDR_BASE;
-+	for (i=0; itoeq[i];
-+		wptr = toe_qhdr->word1.bits.wptr;
-+		rptr = toe_qhdr->word1.bits.rptr;
-+		while (rptr != wptr)
-+		{
-+			toe_curr_desc = (GMAC_RXDESC_T *)toeq_info->desc_base + rptr;
-+			skb = (struct sk_buff *)(REG32(__va(toe_curr_desc->word2.buf_adr) - SKB_RESERVE_BYTES));
-+			dev_kfree_skb_irq(skb);
-+			rptr = RWPTR_ADVANCE_ONE(rptr, toeq_info->desc_num);
-+			SET_RPTR(&toe_qhdr->word1.bits32, rptr);
-+			wptr = toe_qhdr->word1.bits.wptr;
-+			rptr = toe_qhdr->word1.bits.rptr;
-+		}
-+		toe_qhdr->word1.bits32 = 0;
-+		toeq_info->rwptr.bits32 = 0;
-+	}
-+}
-+#endif
-+/*----------------------------------------------------------------------
-+* 	sl351x_gmac_release_intr_q
-+*----------------------------------------------------------------------*/
-+#ifdef _TOEQ_CLASSQ_READY_
-+static void sl351x_gmac_release_intr_q(void)
-+{
-+}
-+#endif
-+/*----------------------------------------------------------------------
-+* 	sl351x_gmac_release_sw_free_q
-+*----------------------------------------------------------------------*/
-+static void sl351x_gmac_release_sw_free_q(void)
-+{
-+	TOE_INFO_T				*toe;
-+	volatile DMA_RWPTR_T	fq_rwptr;
-+	volatile GMAC_RXDESC_T	*fq_desc;
-+
-+	toe = (TOE_INFO_T *)&toe_private_data;
-+	fq_rwptr.bits32 = readl(TOE_GLOBAL_BASE + GLOBAL_SWFQ_RWPTR_REG);
-+
-+	while ((unsigned short)RWPTR_ADVANCE_ONE(fq_rwptr.bits.wptr, TOE_SW_FREEQ_DESC_NUM) != fq_rwptr.bits.rptr)
-+	{
-+		struct sk_buff *skb;
-+		if ((skb = dev_alloc_skb(SW_RX_BUF_SIZE))==NULL)  /* allocate socket buffer */
-+		{
-+			printk("%s::skb buffer allocation fail !\n",__func__); while(1);
-+		}
-+		// *(unsigned int *)(skb->data) = (unsigned int)skb;
-+		REG32(skb->data) = (unsigned long)skb;
-+		skb_reserve(skb, SKB_RESERVE_BYTES);
-+
-+		fq_rwptr.bits.wptr = RWPTR_ADVANCE_ONE(fq_rwptr.bits.wptr, TOE_SW_FREEQ_DESC_NUM);
-+		fq_desc = (volatile GMAC_RXDESC_T *)toe->swfq_desc_base + fq_rwptr.bits.wptr;
-+		fq_desc->word2.buf_adr = (unsigned int)__pa(skb->data);
-+		SET_WPTR(TOE_GLOBAL_BASE + GLOBAL_SWFQ_RWPTR_REG, fq_rwptr.bits.wptr);
-+		fq_rwptr.bits32 = readl(TOE_GLOBAL_BASE + GLOBAL_SWFQ_RWPTR_REG);
-+	}
-+
-+	toe->fq_rx_rwptr.bits.wptr = TOE_SW_FREEQ_DESC_NUM - 1;
-+	toe->fq_rx_rwptr.bits.rptr = 0;
-+	writel(toe->fq_rx_rwptr.bits32, TOE_GLOBAL_BASE + GLOBAL_SWFQ_RWPTR_REG);
-+
-+}
-+/*----------------------------------------------------------------------
-+* 	sl351x_gmac_release_hw_free_q
-+*----------------------------------------------------------------------*/
-+static void sl351x_gmac_release_hw_free_q(void)
-+{
-+	DMA_RWPTR_T			rwptr_reg;
-+
-+#ifdef CONFIG_SL351x_NAT
-+	int					i;
-+	TOE_INFO_T			*toe;
-+	GMAC_RXDESC_T		*desc_ptr;
-+	unsigned int		buf_ptr;
-+
-+	toe = (TOE_INFO_T *)&toe_private_data;
-+	desc_ptr = (GMAC_RXDESC_T *)toe->hwfq_desc_base;
-+	buf_ptr = (unsigned int)toe->hwfq_buf_base_dma;
-+	for (i=0; iword0.bits.buffer_size = HW_RX_BUF_SIZE;
-+		desc_ptr->word1.bits.sw_id = i;
-+		desc_ptr->word2.buf_adr = (unsigned int)buf_ptr;
-+   		desc_ptr++;
-+   		buf_ptr += HW_RX_BUF_SIZE;
-+	}
-+#endif
-+	rwptr_reg.bits.wptr = TOE_HW_FREEQ_DESC_NUM - 1;
-+	rwptr_reg.bits.rptr = 0;
-+	writel(rwptr_reg.bits32, TOE_GLOBAL_BASE + GLOBAL_HWFQ_RWPTR_REG);
-+}
-+
-+/*----------------------------------------------------------------------
-+* 	sl351x_gmac_release_hw_free_q
-+*----------------------------------------------------------------------*/
-+#ifdef CONFIG_SL351x_NAT
-+static void sl351x_gmac_release_hwtx_q(void)
-+{
-+	int				i;
-+	unsigned int	rwptr_addr;
-+
-+	rwptr_addr = TOE_GMAC0_DMA_BASE + GMAC_HW_TX_QUEUE0_PTR_REG;
-+	for (i=0; ihwfq_desc_base;
-+	buf_ptr = (unsigned int)toe->hwfq_buf_base_dma;
-+	for (i=0; iword0.bits.buffer_size = HW_RX_BUF_SIZE;
-+		desc_ptr->word1.bits.sw_id = i;
-+		desc_ptr->word2.buf_adr = (unsigned int)buf_ptr;
-+		desc_ptr++;
-+		buf_ptr += HW_RX_BUF_SIZE;
-+	}
-+	rwptr.bits32 = readl(TOE_GLOBAL_BASE + GLOBAL_HWFQ_RWPTR_REG);
-+	rwptr.bits.wptr = RWPTR_RECEDE_ONE(rwptr.bits.rptr, TOE_HW_FREEQ_DESC_NUM);
-+	writel(rwptr.bits32, TOE_GLOBAL_BASE + GLOBAL_HWFQ_RWPTR_REG);
-+	writel(0, TOE_GLOBAL_BASE + 0x4084);
-+
-+	// Enable Rx of GMAC-0 & 1
-+	config0.bits32 = readl(TOE_GMAC0_BASE+GMAC_CONFIG0);
-+	config0.bits.dis_rx = 0;
-+	writel(config0.bits32, TOE_GMAC0_BASE+GMAC_CONFIG0);
-+	config0.bits32 = readl(TOE_GMAC1_BASE+GMAC_CONFIG0);
-+	config0.bits.dis_rx = 0;
-+	writel(config0.bits32, TOE_GMAC1_BASE+GMAC_CONFIG0);
-+}
-+#endif
-+#endif // CONFIG_SL351x_NAT
-+
-+#endif // SL351x_GMAC_WORKAROUND
-+
-+/* get the mac addresses from flash
-+ *can't do this in module_init because mtd driver is initialized after ethernet
-+ */
-+static __init int sl351x_mac_address_init(void)
-+{
-+	GMAC_INFO_T		*tp;
-+	struct sockaddr sock;
-+	int i;
-+
-+	/* get mac address from FLASH */
-+	gmac_get_mac_address();
-+
-+	for (i = 0; i < GMAC_NUM; i++) {
-+		tp = (GMAC_INFO_T *)&toe_private_data.gmac[i];
-+		memcpy(&sock.sa_data[0],ð_mac[tp->port_id][0],6);
-+		gmac_set_mac_address(tp->dev,(void *)&sock);
-+	}
-+
-+        return 0;
-+}
-+late_initcall(sl351x_mac_address_init);
-+
-+
---- /dev/null
-+++ b/drivers/net/sl351x_hash.c
-@@ -0,0 +1,713 @@
-+/**************************************************************************
-+* Copyright 2006 StorLink Semiconductors, Inc.  All rights reserved.
-+*--------------------------------------------------------------------------
-+* Name			: sl351x_hash.c
-+* Description	:
-+*		Handle Storlink SL351x Hash Functions
-+*
-+* History
-+*
-+*	Date		Writer		Description
-+*----------------------------------------------------------------------------
-+*	03/13/2006	Gary Chen	Create and implement
-+*
-+****************************************************************************/
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#define	 MIDWAY
-+#define	 SL_LEPUS
-+
-+#include 
-+#include 
-+#include 
-+
-+#ifndef RXTOE_DEBUG
-+#define RXTOE_DEBUG
-+#endif
-+#undef RXTOE_DEBUG
-+
-+/*----------------------------------------------------------------------
-+* Definition
-+*----------------------------------------------------------------------*/
-+#define	hash_printf				printk
-+
-+#define HASH_TIMER_PERIOD		(30)	// seconds
-+#define HASH_ILLEGAL_INDEX		0xffff
-+
-+/*----------------------------------------------------------------------
-+* Variables
-+*----------------------------------------------------------------------*/
-+u32					hash_nat_owner_bits[HASH_TOTAL_ENTRIES/32];
-+char 				hash_tables[HASH_TOTAL_ENTRIES][HASH_MAX_BYTES] __attribute__ ((aligned(16)));
-+static struct timer_list hash_timer_obj;
-+LIST_HEAD(hash_timeout_list);
-+
-+/*----------------------------------------------------------------------
-+* Functions
-+*----------------------------------------------------------------------*/
-+void dm_long(u32 location, int length);
-+static void hash_timer_func(u32 data);
-+
-+/*----------------------------------------------------------------------
-+* hash_init
-+*----------------------------------------------------------------------*/
-+void sl351x_hash_init(void)
-+{
-+	int i;
-+	volatile u32 *dp1, *dp2, dword;
-+
-+	dp1 = (volatile u32 *) TOE_V_BIT_BASE;
-+	dp2 = (volatile u32 *) TOE_A_BIT_BASE;
-+
-+	for (i=0; iindex, 1);
-+//	printk("Dump hash key!\n");
-+//	dump_hash_key(entry);
-+	return entry->index;
-+}
-+
-+/*----------------------------------------------------------------------
-+* hash_set_valid_flag
-+*----------------------------------------------------------------------*/
-+void hash_set_valid_flag(int index, int valid)
-+{
-+	register u32 reg32;
-+
-+	reg32 = TOE_V_BIT_BASE + (index/32) * 4;
-+
-+	if (valid)
-+	{
-+		writel(readl(reg32) | (1 << (index%32)), reg32);
-+	}
-+	else
-+	{
-+		writel(readl(reg32) & ~(1 << (index%32)), reg32);
-+	}
-+}
-+
-+/*----------------------------------------------------------------------
-+* hash_set_nat_owner_flag
-+*----------------------------------------------------------------------*/
-+void hash_set_nat_owner_flag(int index, int valid)
-+{
-+	if (valid)
-+	{
-+		hash_nat_owner_bits[index/32] |= (1 << (index % 32));
-+	}
-+	else
-+	{
-+		hash_nat_owner_bits[index/32] &= ~(1 << (index % 32));
-+	}
-+}
-+
-+
-+/*----------------------------------------------------------------------
-+* hash_build_keys
-+*----------------------------------------------------------------------*/
-+int hash_build_keys(u32 *destp, HASH_ENTRY_T *entry)
-+{
-+	u32 	data;
-+	unsigned char 	*cp;
-+	int				i, j;
-+	unsigned short 	index;
-+	int 			total;
-+
-+	memset((void *)destp, 0, HASH_MAX_BYTES);
-+	cp = (unsigned char *)destp;
-+
-+	if (entry->key_present.port || entry->key_present.Ethertype)
-+	{
-+		HASH_PUSH_WORD(cp, entry->key.Ethertype);		// word 0
-+		HASH_PUSH_BYTE(cp, entry->key.port);			// Byte 2
-+		HASH_PUSH_BYTE(cp, 0);							// Byte 3
-+	}
-+	else
-+	{
-+		HASH_PUSH_DWORD(cp, 0);
-+	}
-+
-+	if (entry->key_present.da || entry->key_present.sa)
-+	{
-+		unsigned char mac[4];
-+		if (entry->key_present.da)
-+		{
-+			for (i=0; i<4; i++)
-+				HASH_PUSH_BYTE(cp, entry->key.da[i]);
-+		}
-+		mac[0] = (entry->key_present.da) ? entry->key.da[4] : 0;
-+		mac[1] = (entry->key_present.da) ? entry->key.da[5] : 0;
-+		mac[2] = (entry->key_present.sa) ? entry->key.sa[0] : 0;
-+		mac[3] = (entry->key_present.sa) ? entry->key.sa[1] : 0;
-+		data = mac[0] + (mac[1]<<8) + (mac[2]<<16) + (mac[3]<<24);
-+		HASH_PUSH_DWORD(cp, data);
-+		if (entry->key_present.sa)
-+		{
-+			for (i=2; i<6; i++)
-+				HASH_PUSH_BYTE(cp, entry->key.sa[i]);
-+		}
-+	}
-+
-+	if (entry->key_present.pppoe_sid || entry->key_present.vlan_id)
-+	{
-+		HASH_PUSH_WORD(cp, entry->key.vlan_id);		// low word
-+		HASH_PUSH_WORD(cp, entry->key.pppoe_sid);	// high word
-+	}
-+	if (entry->key_present.ipv4_hdrlen || entry->key_present.ip_tos || entry->key_present.ip_protocol)
-+	{
-+		HASH_PUSH_BYTE(cp, entry->key.ip_protocol);		// Byte 0
-+		HASH_PUSH_BYTE(cp, entry->key.ip_tos);			// Byte 1
-+		HASH_PUSH_BYTE(cp, entry->key.ipv4_hdrlen);		// Byte 2
-+		HASH_PUSH_BYTE(cp, 0);							// Byte 3
-+	}
-+
-+	if (entry->key_present.ipv6_flow_label)
-+	{
-+		HASH_PUSH_DWORD(cp, entry->key.ipv6_flow_label);	// low word
-+	}
-+	if (entry->key_present.sip)
-+	{
-+		// input (entry->key.sip[i]) is network-oriented
-+		// output (hash key) is host-oriented
-+		for (i=3; i>=0; i--)
-+			HASH_PUSH_BYTE(cp, entry->key.sip[i]);
-+		if (entry->key.ipv6)
-+		{
-+			for (i=4; i<16; i+=4)
-+			{
-+				for (j=i+3; j>=i; j--)
-+					HASH_PUSH_BYTE(cp, entry->key.sip[j]);
-+			}
-+		}
-+	}
-+	if (entry->key_present.dip)
-+	{
-+		// input (entry->key.sip[i]) is network-oriented
-+		// output (hash key) is host-oriented
-+		for (i=3; i>=0; i--)
-+			HASH_PUSH_BYTE(cp, entry->key.dip[i]);
-+		if (entry->key.ipv6)
-+		{
-+			for (i=4; i<16; i+=4)
-+			{
-+				for (j=i+3; j>=i; j--)
-+					HASH_PUSH_BYTE(cp, entry->key.dip[j]);
-+			}
-+		}
-+	}
-+
-+	if (entry->key_present.l4_bytes_0_3)
-+	{
-+		HASH_PUSH_BYTE(cp, entry->key.l4_bytes[0]);
-+		HASH_PUSH_BYTE(cp, entry->key.l4_bytes[1]);
-+		HASH_PUSH_BYTE(cp, entry->key.l4_bytes[2]);
-+		HASH_PUSH_BYTE(cp, entry->key.l4_bytes[3]);
-+	}
-+	if (entry->key_present.l4_bytes_4_7)
-+	{
-+		HASH_PUSH_BYTE(cp, entry->key.l4_bytes[4]);
-+		HASH_PUSH_BYTE(cp, entry->key.l4_bytes[5]);
-+		HASH_PUSH_BYTE(cp, entry->key.l4_bytes[6]);
-+		HASH_PUSH_BYTE(cp, entry->key.l4_bytes[7]);
-+	}
-+	if (entry->key_present.l4_bytes_8_11)
-+	{
-+		HASH_PUSH_BYTE(cp, entry->key.l4_bytes[8]);
-+		HASH_PUSH_BYTE(cp, entry->key.l4_bytes[9]);
-+		HASH_PUSH_BYTE(cp, entry->key.l4_bytes[10]);
-+		HASH_PUSH_BYTE(cp, entry->key.l4_bytes[11]);
-+	}
-+	if (entry->key_present.l4_bytes_12_15)
-+	{
-+		HASH_PUSH_BYTE(cp, entry->key.l4_bytes[12]);
-+		HASH_PUSH_BYTE(cp, entry->key.l4_bytes[13]);
-+		HASH_PUSH_BYTE(cp, entry->key.l4_bytes[14]);
-+		HASH_PUSH_BYTE(cp, entry->key.l4_bytes[15]);
-+	}
-+	if (entry->key_present.l4_bytes_16_19)
-+	{
-+		HASH_PUSH_BYTE(cp, entry->key.l4_bytes[16]);
-+		HASH_PUSH_BYTE(cp, entry->key.l4_bytes[17]);
-+		HASH_PUSH_BYTE(cp, entry->key.l4_bytes[18]);
-+		HASH_PUSH_BYTE(cp, entry->key.l4_bytes[19]);
-+	}
-+	if (entry->key_present.l4_bytes_20_23)
-+	{
-+		HASH_PUSH_BYTE(cp, entry->key.l4_bytes[20]);
-+		HASH_PUSH_BYTE(cp, entry->key.l4_bytes[21]);
-+		HASH_PUSH_BYTE(cp, entry->key.l4_bytes[22]);
-+		HASH_PUSH_BYTE(cp, entry->key.l4_bytes[23]);
-+	}
-+	if (entry->key_present.l7_bytes_0_3)
-+	{
-+		HASH_PUSH_BYTE(cp, entry->key.l7_bytes[0]);
-+		HASH_PUSH_BYTE(cp, entry->key.l7_bytes[1]);
-+		HASH_PUSH_BYTE(cp, entry->key.l7_bytes[2]);
-+		HASH_PUSH_BYTE(cp, entry->key.l7_bytes[3]);
-+	}
-+	if (entry->key_present.l7_bytes_4_7)
-+	{
-+		HASH_PUSH_BYTE(cp, entry->key.l7_bytes[4]);
-+		HASH_PUSH_BYTE(cp, entry->key.l7_bytes[5]);
-+		HASH_PUSH_BYTE(cp, entry->key.l7_bytes[6]);
-+		HASH_PUSH_BYTE(cp, entry->key.l7_bytes[7]);
-+	}
-+	if (entry->key_present.l7_bytes_8_11)
-+	{
-+		HASH_PUSH_BYTE(cp, entry->key.l7_bytes[8]);
-+		HASH_PUSH_BYTE(cp, entry->key.l7_bytes[9]);
-+		HASH_PUSH_BYTE(cp, entry->key.l7_bytes[10]);
-+		HASH_PUSH_BYTE(cp, entry->key.l7_bytes[11]);
-+	}
-+	if (entry->key_present.l7_bytes_12_15)
-+	{
-+		HASH_PUSH_BYTE(cp, entry->key.l7_bytes[12]);
-+		HASH_PUSH_BYTE(cp, entry->key.l7_bytes[13]);
-+		HASH_PUSH_BYTE(cp, entry->key.l7_bytes[14]);
-+		HASH_PUSH_BYTE(cp, entry->key.l7_bytes[15]);
-+	}
-+	if (entry->key_present.l7_bytes_16_19)
-+	{
-+		HASH_PUSH_BYTE(cp, entry->key.l7_bytes[16]);
-+		HASH_PUSH_BYTE(cp, entry->key.l7_bytes[17]);
-+		HASH_PUSH_BYTE(cp, entry->key.l7_bytes[18]);
-+		HASH_PUSH_BYTE(cp, entry->key.l7_bytes[19]);
-+	}
-+	if (entry->key_present.l7_bytes_20_23)
-+	{
-+		HASH_PUSH_BYTE(cp, entry->key.l7_bytes[20]);
-+		HASH_PUSH_BYTE(cp, entry->key.l7_bytes[21]);
-+		HASH_PUSH_BYTE(cp, entry->key.l7_bytes[22]);
-+		HASH_PUSH_BYTE(cp, entry->key.l7_bytes[23]);
-+	}
-+
-+	// get hash index
-+	total = (u32)((u32)cp - (u32)destp) / (sizeof(u32));
-+
-+	if (total > HASH_MAX_KEY_DWORD)
-+	{
-+		//hash_printf("Total key words (%d) is too large (> %d)!\n",
-+		//				total, HASH_MAX_KEY_DWORD);
-+		return -1;
-+	}
-+
-+	if (entry->key_present.port || entry->key_present.Ethertype)
-+		index = hash_gen_crc16((unsigned char *)destp, total * 4);
-+	else
-+	{
-+		if (total == 1)
-+		{
-+			hash_printf("No key is assigned!\n");
-+			return -1;
-+		}
-+
-+		index = hash_gen_crc16((unsigned char *)(destp+1), (total-1) * 4);
-+	}
-+
-+	entry->index = index & HASH_BITS_MASK;
-+
-+	//hash_printf("Total key words = %d, Hash Index= %d\n",
-+	//				total, entry->index);
-+
-+	cp = (unsigned char *)destp;
-+	cp+=3;
-+	HASH_PUSH_BYTE(cp, entry->rule);	// rule
-+
-+	entry->total_dwords = total;
-+
-+	return total;
-+}
-+
-+/*----------------------------------------------------------------------
-+* hash_build_nat_keys
-+*----------------------------------------------------------------------*/
-+void hash_build_nat_keys(u32 *destp, HASH_ENTRY_T *entry)
-+{
-+	unsigned char 	*cp;
-+	int				i;
-+	unsigned short 	index;
-+	int 			total;
-+
-+	memset((void *)destp, 0, HASH_MAX_BYTES);
-+
-+	cp = (unsigned char *)destp + 2;
-+	HASH_PUSH_BYTE(cp, entry->key.port);
-+	cp++;
-+
-+	if (entry->key_present.pppoe_sid || entry->key_present.vlan_id)
-+	{
-+		HASH_PUSH_WORD(cp, entry->key.vlan_id);		// low word
-+		HASH_PUSH_WORD(cp, entry->key.pppoe_sid);	// high word
-+	}
-+
-+	HASH_PUSH_BYTE(cp, entry->key.ip_protocol);
-+	cp+=3;
-+
-+	// input (entry->key.sip[i]) is network-oriented
-+	// output (hash key) is host-oriented
-+	for (i=3; i>=0; i--)
-+		HASH_PUSH_BYTE(cp, entry->key.sip[i]);
-+
-+	// input (entry->key.sip[i]) is network-oriented
-+	// output (hash key) is host-oriented
-+	for (i=3; i>=0; i--)
-+		HASH_PUSH_BYTE(cp, entry->key.dip[i]);
-+
-+	HASH_PUSH_BYTE(cp, entry->key.l4_bytes[0]);
-+	HASH_PUSH_BYTE(cp, entry->key.l4_bytes[1]);
-+	HASH_PUSH_BYTE(cp, entry->key.l4_bytes[2]);
-+	HASH_PUSH_BYTE(cp, entry->key.l4_bytes[3]);
-+
-+	// get hash index
-+	total = (u32)((u32)cp - (u32)destp) / (sizeof(u32));
-+
-+	index = hash_gen_crc16((unsigned char *)destp, total * 4);
-+	entry->index = index & ((1 << HASH_BITS) - 1);
-+
-+	cp = (unsigned char *)destp;
-+	cp+=3;
-+	HASH_PUSH_BYTE(cp, entry->rule);	// rule
-+
-+	entry->total_dwords = total;
-+}
-+
-+/*----------------------------------------------------------------------
-+* hash_build_toe_keys
-+*----------------------------------------------------------------------*/
-+int hash_build_toe_keys(u32 *destp, HASH_ENTRY_T *entry)
-+{
-+	unsigned long	data;
-+	unsigned char	*cp;
-+	unsigned short	index;
-+	int	i;
-+	int total;
-+	//printk("%s\n", __func__);
-+	memset((void*)destp, 0, HASH_MAX_BYTES);
-+	cp = (unsigned char*)destp;
-+
-+	if(entry->key_present.port || entry->key_present.Ethertype) {
-+		data = (entry->key.port << 16) + entry->key.Ethertype;
-+		HASH_PUSH_DWORD(cp, data);
-+	} else
-+		HASH_PUSH_DWORD(cp, 0);
-+
-+	if (entry->key_present.da || entry->key_present.sa) {
-+		unsigned char	mac[4];
-+		if (entry->key_present.da) {
-+			data = (entry->key.da[0]) + (entry->key.da[1] << 8) +
-+				   (entry->key.da[2] << 16) + (entry->key.da[3] <<24);
-+			HASH_PUSH_DWORD(cp, data);
-+		}
-+		mac[0] = (entry->key_present.da) ? entry->key.da[4] : 0;
-+		mac[1] = (entry->key_present.da) ? entry->key.da[5] : 0;
-+		mac[2] = (entry->key_present.sa) ? entry->key.sa[0] : 0;
-+		mac[3] = (entry->key_present.sa) ? entry->key.sa[1] : 0;
-+		data = mac[0] + (mac[1]<<8) + (mac[2]<<16) + (mac[3]<<24);
-+		HASH_PUSH_DWORD(cp, data);
-+		if (entry->key_present.sa) {
-+			data = (entry->key.sa[2]) + (entry->key.sa[3] << 8) +
-+				   (entry->key.sa[4] << 16) + (entry->key.sa[5] <<24);
-+			HASH_PUSH_DWORD(cp, data);
-+		}
-+	}
-+
-+	if (entry->key_present.ip_protocol) {
-+		unsigned char ip_protocol;
-+		ip_protocol = entry->key.ip_protocol;
-+		data = ip_protocol;
-+		HASH_PUSH_DWORD(cp, data);
-+	}
-+
-+	if (entry->key_present.ipv6_flow_label) {
-+		unsigned long flow_label;
-+		flow_label  = entry->key.ipv6_flow_label;
-+		data = flow_label & 0xfffff;
-+		HASH_PUSH_DWORD(cp, data);
-+	}
-+
-+	if (entry->key_present.sip)	{
-+		{
-+			data = IPIV(entry->key.sip[0], entry->key.sip[1],
-+					entry->key.sip[2], entry->key.sip[3]);
-+			HASH_PUSH_DWORD(cp, data);
-+			if (entry->key.ipv6) {
-+				for (i=4; i<16; i+=4) {
-+					data = IPIV(entry->key.sip[i+0], entry->key.sip[i+1],
-+							entry->key.sip[i+2], entry->key.sip[i+3]);
-+					HASH_PUSH_DWORD(cp, data);
-+				}
-+			}
-+		}
-+	}
-+
-+	if (entry->key_present.dip)	{
-+		{
-+			data = IPIV(entry->key.dip[0], entry->key.dip[1],
-+						entry->key.dip[2], entry->key.dip[3]);
-+			HASH_PUSH_DWORD(cp, data);
-+			if (entry->key.ipv6) {
-+				for (i=4; i<16; i+=4) {
-+					data = IPIV(entry->key.dip[i+0], entry->key.dip[i+1],
-+								entry->key.dip[i+2], entry->key.dip[i+3]);
-+					HASH_PUSH_DWORD(cp, data);
-+				}
-+			}
-+		}
-+	}
-+	if (entry->key_present.l4_bytes_0_3)
-+	{
-+		unsigned char *datap;
-+		datap = &entry->key.l4_bytes[0];
-+		data = 	datap[0] + 	(datap[1] << 8) + (datap[2] << 16) + (datap[3] << 24);
-+		HASH_PUSH_DWORD(cp, data);
-+	}
-+	if (entry->key_present.l7_bytes_0_3)
-+	{
-+		unsigned char *datap;
-+		datap = &entry->key.l7_bytes[0];
-+		data = 	datap[0] + 	(datap[1] << 8) + (datap[2] << 16) + (datap[3] << 24);
-+		HASH_PUSH_DWORD(cp, data);
-+	}
-+	if (entry->key_present.l7_bytes_4_7)
-+	{
-+		unsigned char *datap;
-+		datap = &entry->key.l7_bytes[4];
-+		data = 	datap[0] + 	(datap[1] << 8) + (datap[2] << 16) + (datap[3] << 24);
-+		HASH_PUSH_DWORD(cp, data);
-+	}
-+
-+	total = (unsigned long)((unsigned long)cp - (unsigned long)destp) / (sizeof(u32));
-+	if (total > HASH_MAX_KEY_DWORD) {
-+		//printf("Total key words (%d) is too large (> %d)!\n",
-+		//		total, HASH_MAX_KEY_DWORD);
-+		return -1;
-+	}
-+	index = hash_gen_crc16((unsigned char*)(destp + 1), (total-1)*4);
-+	entry->index = index & ((1 << HASH_BITS)-1);
-+
-+	cp = (unsigned char*) destp;
-+	cp += 3;
-+	HASH_PUSH_BYTE(cp, entry->rule);
-+	entry->total_dwords = total;
-+	return total;
-+}
-+
-+/*----------------------------------------------------------------------
-+* hash_add_toe_entry
-+*----------------------------------------------------------------------*/
-+int hash_add_toe_entry(HASH_ENTRY_T *entry)
-+{
-+	int	rc;
-+	u32	key[HASH_MAX_DWORDS];
-+
-+	rc = hash_build_toe_keys((u32 *)&key, entry);
-+	if (rc < 0)
-+		return -1;
-+	hash_write_entry(entry, (unsigned char*) &key[0]);
-+	//hash_dump_entry(entry->index);
-+//	hash_set_valid_flag(entry->index, 1);
-+//	printk("Dump hash key!\n");
-+//	dump_hash_key(entry);
-+	return entry->index;
-+}
-+
-+
-+/*----------------------------------------------------------------------
-+* hash_write_entry
-+*----------------------------------------------------------------------*/
-+int hash_write_entry(HASH_ENTRY_T *entry, unsigned char *key)
-+{
-+	int		i;
-+	u32		*srcep, *destp, *destp2;
-+
-+	srcep = (u32 *)key;
-+	destp2 = destp = (u32 *)&hash_tables[entry->index][0];
-+
-+	for (i=0; i<(entry->total_dwords); i++, srcep++, destp++)
-+		*destp = *srcep;
-+
-+	srcep = (u32 *)&entry->action;
-+	*destp++ = *srcep;
-+
-+	srcep = (u32 *)&entry->param;
-+	for (i=0; i<(sizeof(ENTRY_PARAM_T)/sizeof(*destp)); i++, srcep++, destp++)
-+		*destp = *srcep;
-+
-+	memset(destp, 0, (HASH_MAX_DWORDS-entry->total_dwords-HASH_ACTION_DWORDS) * sizeof(u32));
-+
-+	consistent_sync(destp2, (entry->total_dwords+HASH_ACTION_DWORDS) * 4, PCI_DMA_TODEVICE);
-+	return 0;
-+}
-+
-+/*----------------------------------------------------------------------
-+* hash_timer_func
-+*----------------------------------------------------------------------*/
-+static void hash_timer_func(u32 data)
-+{
-+	int					i, j, idx;
-+	volatile u32		*own_p, *valid_p;
-+	u32					own_bits, a_bits;
-+	int					period = HASH_TIMER_PERIOD;
-+
-+	valid_p = (volatile u32 *)TOE_V_BIT_BASE;
-+	own_p = (volatile u32 *)hash_nat_owner_bits;
-+	for (i=0, idx=0; i<(HASH_TOTAL_ENTRIES/32); i++, own_p++, valid_p++, idx+=32)
-+	{
-+		a_bits = readl(TOE_A_BIT_BASE + (i*4));
-+		own_bits = *own_p;
-+		if (own_bits)
-+		{
-+			for (j=0; own_bits && j<32; j++)
-+			{
-+				if (own_bits & 1)
-+				{
-+					short *counter_p, *interval_p;
-+					NAT_HASH_ENTRY_T	*nat_entry;
-+					GRE_HASH_ENTRY_T	*gre_entry;
-+					nat_entry = (NAT_HASH_ENTRY_T *)hash_get_entry(idx+j);
-+					gre_entry = (GRE_HASH_ENTRY_T *)nat_entry;
-+					if (nat_entry->key.ip_protocol == IPPROTO_GRE)
-+					{
-+						counter_p = (short *)&gre_entry->tmo.counter;
-+						interval_p = (short *)&gre_entry->tmo.interval;
-+					}
-+					else
-+					{
-+						counter_p = (short *)&nat_entry->tmo.counter;
-+						interval_p = (short *)&nat_entry->tmo.interval;
-+					}
-+					if (a_bits & 1)
-+					{
-+						*counter_p = *interval_p;
-+					}
-+					else
-+					{
-+						*counter_p -= HASH_TIMER_PERIOD;
-+						if (*counter_p <= 0)
-+						{
-+							*valid_p &= ~(1 << j);		// invalidate it
-+							*own_p &= ~(1 << j);		// release ownership for NAT
-+							*counter_p = 0;
-+							// hash_printf("%lu %s: Clear hash index: %d\n", jiffies/HZ, __func__, i*32+j);
-+						}
-+						else if (period > *counter_p)
-+						{
-+							period = *counter_p;
-+						}
-+					}
-+				}
-+				a_bits >>= 1;
-+				own_bits >>=1;
-+			}
-+		}
-+	}
-+
-+	hash_timer_obj.expires = jiffies + (period * HZ);
-+	add_timer((struct timer_list *)data);
-+}
-+
-+/*----------------------------------------------------------------------
-+* dm_long
-+*----------------------------------------------------------------------*/
-+void dm_long(u32 location, int length)
-+{
-+	u32		*start_p, *curr_p, *end_p;
-+	u32		*datap, data;
-+	int		i;
-+
-+	//if (length > 1024)
-+	//	length = 1024;
-+
-+	start_p = (u32 *)location;
-+	end_p = (u32 *)location + length;
-+	curr_p = (u32 *)((u32)location & 0xfffffff0);
-+	datap = (u32 *)location;
-+	while (curr_p < end_p)
-+	{
-+		hash_printf("0x%08x: ",(u32)curr_p & 0xfffffff0);
-+		for (i=0; i<4; i++)
-+		{
-+			if (curr_p < start_p || curr_p >= end_p)
-+               hash_printf("         ");
-+			else
-+			{
-+				data = *datap;
-+				hash_printf("%08X ", data);
-+			}
-+			if (i==1)
-+              hash_printf("- ");
-+
-+			curr_p++;
-+			datap++;
-+		}
-+        hash_printf("\n");
-+	}
-+}
-+
-+/*----------------------------------------------------------------------
-+* hash_dump_entry
-+*----------------------------------------------------------------------*/
-+void hash_dump_entry(int index)
-+{
-+	hash_printf("Hash Index %d:\n", index);
-+	dm_long((u32)&hash_tables[index][0], HASH_MAX_DWORDS);
-+}
-+
-+
---- /dev/null
-+++ b/drivers/net/sl351x_nat.c
-@@ -0,0 +1,1736 @@
-+/****************************************************************************
-+* Copyright 2006 StorLink Semiconductors, Inc.  All rights reserved.
-+*----------------------------------------------------------------------------
-+* Name			: sl351x_nat.c
-+* Description	:
-+*		Handle Storlink SL351x NAT Functions
-+*
-+*
-+* Packet Flow:
-+*
-+*            (xmit)+<--- SW NAT -->+(xmit)
-+*                  |       ^^      |
-+*                  |       ||      |
-+*                  |       ||      |
-+*   Client <---> GMAC-x  HW-NAT  GMAC-y  <---> Server
-+*
-+*
-+* History
-+*
-+*	Date		Writer		Description
-+*----------------------------------------------------------------------------
-+*	03/13/2006	Gary Chen	Create and implement
-+*
-+*
-+****************************************************************************/
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+
-+#define	 MIDWAY
-+#define	 SL_LEPUS
-+
-+#include 
-+#include 
-+#include 
-+#include 
-+#ifdef CONFIG_NETFILTER
-+// #include 
-+#include 
-+#endif
-+
-+//#define NAT_DEBUG_MSG		1
-+#define _NOT_CHECK_SIP_DIP
-+//#define	SL351x_NAT_TEST_BY_SMARTBITS		1	// Initialize 32 hash entries and test by SmartBITS
-+#define VITESSE_G5SWITCH	1
-+
-+#ifdef CONFIG_SL351x_NAT
-+
-+/*----------------------------------------------------------------------
-+* Definition
-+*----------------------------------------------------------------------*/
-+#ifdef CONFIG_SL3516_ASIC
-+#define CONFIG_SL351x_NAT_TCP_UDP
-+#define CONFIG_SL351x_NAT_GRE
-+#define CONFIG_SL351x_TCP_UDP_RULE_ID	0
-+#define CONFIG_SL351x_GRE_RULE_ID		1
-+#else
-+#define CONFIG_SL351x_NAT_TCP_UDP
-+//#define CONFIG_SL351x_NAT_GRE
-+#define CONFIG_SL351x_TCP_UDP_RULE_ID	0
-+#define CONFIG_SL351x_GRE_RULE_ID		0
-+#endif
-+
-+#define	nat_printf					printk
-+#define NAT_FTP_CTRL_PORT 			(21)	// TCP
-+#define NAT_H323_PORT				(1720)	// TCP
-+#define NAT_T120_PORT				(1503)	// TCP
-+#define NAT_PPTP_PORT				(1723)	// TCP
-+#define NAT_TFTP_PORT 				(69)	// UDP
-+#define NAT_DNS_PORT 				(53)	// UDP
-+#define NAT_NTP_PORT				(123)	// UDP
-+#define NAT_RAS_PORT				(1719)	// UDP
-+#define NAT_BOOTP67_PORT			(67)	// UDP
-+#define NAT_BOOTP68_PORT			(68)	// UDP
-+
-+#define NAT_TCP_PORT_MAX			64
-+#define NAT_UDP_PORT_MAX			64
-+
-+#define GRE_PROTOCOL				(0x880b)
-+#define GRE_PROTOCOL_SWAP			__constant_htons(0x880b)
-+
-+#ifdef VITESSE_G5SWITCH
-+extern int Giga_switch;
-+#endif
-+
-+typedef struct
-+{
-+	u16		flags_ver;
-+	u16		protocol;
-+	u16		payload_length;
-+	u16		call_id;
-+	u32		seq;
-+	u32		ack;
-+} GRE_PKTHDR_T;
-+
-+/*----------------------------------------------------------------------
-+* NAT Configuration
-+*
-+* Note: Any change for network setting, the NAT configuration should
-+*       be changed also.
-+*	cfg->lan_port	0 if GMAC-0, 1: if GMAC-1
-+*	cfg->wan_port	0 if GMAC-0, 1: if GMAC-1
-+*	cfg->lan_ipaddr, cfg->lan_gateway, cfg->lan_netmask
-+*	cfg->wan_ipaddr, cfg->wan_gateway, cfg->wan_netmask
-+*
-+*----------------------------------------------------------------------*/
-+NAT_CFG_T 		nat_cfg;
-+static int		nat_initialized;
-+u32 			nat_collision;
-+
-+#ifdef CONFIG_SL351x_NAT_TCP_UDP
-+static u16		fixed_tcp_port_list[]={NAT_FTP_CTRL_PORT,
-+							   			NAT_H323_PORT,
-+							   			// NAT_T120_PORT,
-+							   			NAT_PPTP_PORT,
-+										0};
-+static u16		fixed_udp_port_list[]={NAT_DNS_PORT,
-+									  	NAT_NTP_PORT,
-+									  	NAT_TFTP_PORT,
-+										NAT_RAS_PORT,
-+									  	NAT_BOOTP67_PORT,
-+									  	NAT_BOOTP68_PORT,
-+									   	0};
-+#endif
-+
-+// #define _HAVE_DYNAMIC_PORT_LIST
-+#ifdef _HAVE_DYNAMIC_PORT_LIST
-+static u16		dynamic_tcp_port_list[NAT_TCP_PORT_MAX+1];
-+static u16		dynamic_udp_port_list[NAT_UDP_PORT_MAX+1]};
-+#endif
-+
-+/*----------------------------------------------------------------------
-+* Functions
-+*----------------------------------------------------------------------*/
-+int sl351x_nat_tcp_udp_output(struct sk_buff *skb, int port);
-+int sl351x_nat_udp_output(struct sk_buff *skb, int port);
-+int sl351x_nat_gre_output(struct sk_buff *skb, int port);
-+
-+extern int mac_set_rule_reg(int mac, int rule, int enabled, u32 reg0, u32 reg1, u32 reg2);
-+extern void hash_dump_entry(int index);
-+extern void mac_get_hw_tx_weight(struct net_device *dev, char *weight);
-+extern void mac_set_hw_tx_weight(struct net_device *dev, char *weight);
-+
-+#ifdef SL351x_NAT_TEST_BY_SMARTBITS
-+static void nat_init_test_entry(void);
-+#endif
-+/*----------------------------------------------------------------------
-+* sl351x_nat_init
-+*	initialize a NAT matching rule
-+*	Called by SL351x Driver
-+*		key		: port, protocol, Sip, Dip, Sport, Dport
-+*		Action	: Srce Q: HW Free Queue,
-+*				  Dest Q: HW TxQ
-+*				  Change DA
-+*				  Change SA
-+*                 Change Sip or Dip
-+*    			  Change Sport or Dport
-+*----------------------------------------------------------------------*/
-+void sl351x_nat_init(void)
-+{
-+	int					rc;
-+	GMAC_MRxCR0_T		mrxcr0;
-+	GMAC_MRxCR1_T		mrxcr1;
-+	GMAC_MRxCR2_T		mrxcr2;
-+	NAT_CFG_T			*cfg;
-+
-+	if (nat_initialized)
-+		return;
-+
-+	nat_initialized = 1;
-+
-+	if ((sizeof(NAT_HASH_ENTRY_T) > HASH_MAX_BYTES) ||
-+		(sizeof(GRE_HASH_ENTRY_T) > HASH_MAX_BYTES))
-+	{
-+		nat_printf("NAT_HASH_ENTRY_T structure Size is too larger!\n");
-+		while(1);
-+	}
-+
-+	cfg = (NAT_CFG_T *)&nat_cfg;
-+	memset((void *)cfg, 0, sizeof(NAT_CFG_T));
-+#ifdef _HAVE_DYNAMIC_PORT_LIST
-+	memset((void *)dynamic_tcp_port_list, 0, sizeof(dynamic_tcp_port_list));
-+	memset((void *)dynamic_udp_port_list, 0, sizeof(dynamic_udp_port_list));
-+#endif
-+
-+#ifdef VITESSE_G5SWITCH
-+	if(Giga_switch)
-+	{
-+		cfg->enabled			= 1;
-+		cfg->tcp_udp_rule_id 	= CONFIG_SL351x_TCP_UDP_RULE_ID;
-+		cfg->gre_rule_id 		= CONFIG_SL351x_GRE_RULE_ID;
-+		cfg->lan_port			= 1;
-+		cfg->wan_port			= 0;
-+		cfg->default_hw_txq 	= 3;
-+		cfg->tcp_tmo_interval 	= 60;
-+		cfg->udp_tmo_interval 	= 180;
-+		cfg->gre_tmo_interval 	= 60;
-+	}
-+	else
-+	{
-+		cfg->enabled			= 1;
-+		cfg->tcp_udp_rule_id 	= CONFIG_SL351x_TCP_UDP_RULE_ID;
-+		cfg->gre_rule_id 		= CONFIG_SL351x_GRE_RULE_ID;
-+		cfg->lan_port			= 0;
-+		cfg->wan_port			= 1;
-+		cfg->default_hw_txq 	= 3;
-+		cfg->tcp_tmo_interval 	= 60;
-+		cfg->udp_tmo_interval 	= 180;
-+		cfg->gre_tmo_interval 	= 60;
-+
-+	}
-+#endif
-+
-+#if 1	//	debug purpose
-+	cfg->ipcfg[0].total				= 1;
-+	cfg->ipcfg[0].entry[0].ipaddr	= IPIV(192,168,2,92);
-+	cfg->ipcfg[0].entry[0].netmask	= IPIV(255,255,255,0);
-+	cfg->ipcfg[1].total				= 1;
-+	cfg->ipcfg[1].entry[0].ipaddr	= IPIV(192,168,1,200);
-+	cfg->ipcfg[1].entry[0].netmask	= IPIV(255,255,255,0);
-+#endif
-+
-+#if 1
-+	cfg->xport.total = 0;
-+#else
-+	cfg->xport.total = 4;
-+
-+	// H.323/H.225 Call setup
-+	cfg->xport.entry[0].protocol = IPPROTO_TCP;
-+	cfg->xport.entry[0].sport_start = 0;
-+	cfg->xport.entry[0].sport_end = 0;
-+	cfg->xport.entry[0].dport_start = 1720;
-+	cfg->xport.entry[0].dport_end = 1720;
-+	cfg->xport.entry[1].protocol = IPPROTO_TCP;
-+	cfg->xport.entry[1].sport_start = 1720;
-+	cfg->xport.entry[1].sport_end = 1720;
-+	cfg->xport.entry[1].dport_start = 0;
-+	cfg->xport.entry[1].dport_end = 0;
-+
-+	// RAS Setup
-+	cfg->xport.entry[2].protocol = IPPROTO_UDP;
-+	cfg->xport.entry[2].sport_start = 0;
-+	cfg->xport.entry[2].sport_end = 0;
-+	cfg->xport.entry[2].dport_start = 1719;
-+	cfg->xport.entry[2].dport_end = 1719;
-+	cfg->xport.entry[3].protocol = IPPROTO_UDP;
-+	cfg->xport.entry[3].sport_start = 1719;
-+	cfg->xport.entry[3].sport_end = 1719;
-+	cfg->xport.entry[3].dport_start = 0;
-+	cfg->xport.entry[3].dport_end = 0;
-+#endif
-+
-+#ifdef CONFIG_SL351x_NAT_TCP_UDP
-+	mrxcr0.bits32 = 0;
-+	mrxcr1.bits32 = 0;
-+	mrxcr2.bits32 = 0;
-+	mrxcr0.bits.port = 1;
-+	mrxcr0.bits.l3 = 1;
-+	mrxcr0.bits.l4 = 1;
-+	mrxcr1.bits.sip = 1;
-+	mrxcr1.bits.dip = 1;
-+	mrxcr1.bits.l4_byte0_15 = 0x0f;	// Byte 0-3
-+	mrxcr0.bits.sprx = 3;
-+
-+	rc = mac_set_rule_reg(cfg->lan_port, cfg->tcp_udp_rule_id, 1, mrxcr0.bits32, mrxcr1.bits32, mrxcr2.bits32);
-+	if (rc < 0)
-+	{
-+		nat_printf("NAT Failed to set MAC-%d Rule %d!\n", cfg->lan_port, cfg->tcp_udp_rule_id);
-+	}
-+
-+	if (cfg->lan_port != cfg->wan_port)
-+	{
-+		rc = mac_set_rule_reg(cfg->wan_port, cfg->tcp_udp_rule_id, 1, mrxcr0.bits32, mrxcr1.bits32, mrxcr2.bits32);
-+		if (rc < 0)
-+		{
-+			nat_printf("NAT Failed to set MAC-%d Rule %d!\n", cfg->wan_port, cfg->tcp_udp_rule_id);
-+		}
-+	}
-+#endif
-+
-+#ifdef CONFIG_SL351x_NAT_GRE
-+	mrxcr0.bits32 = 0;
-+	mrxcr1.bits32 = 0;
-+	mrxcr2.bits32 = 0;
-+	mrxcr0.bits.port = 1;
-+	mrxcr0.bits.l3 = 1;
-+	mrxcr0.bits.l4 = 1;
-+	mrxcr1.bits.sip = 1;
-+	mrxcr1.bits.dip = 1;
-+	mrxcr1.bits.l4_byte0_15 = 0xcc;	// Byte 2, 3, 6, 7
-+	mrxcr0.bits.sprx = 4;			// see GMAC driver about SPR
-+
-+	rc = mac_set_rule_reg(cfg->lan_port, cfg->gre_rule_id, 1, mrxcr0.bits32, mrxcr1.bits32, mrxcr2.bits32);
-+	if (rc < 0)
-+	{
-+		nat_printf("NAT Failed to set MAC-%d Rule %d!\n", cfg->lan_port, cfg->gre_rule_id);
-+	}
-+
-+	if (cfg->lan_port != cfg->wan_port)
-+	{
-+		rc = mac_set_rule_reg(cfg->wan_port, cfg->gre_rule_id, 1, mrxcr0.bits32, mrxcr1.bits32, mrxcr2.bits32);
-+		if (rc < 0)
-+		{
-+			nat_printf("NAT Failed to set MAC-%d Rule %d!\n", cfg->wan_port, cfg->gre_rule_id);
-+		}
-+	}
-+#endif
-+
-+#ifdef SL351x_NAT_TEST_BY_SMARTBITS
-+	nat_init_test_entry();
-+#endif
-+}
-+
-+/*----------------------------------------------------------------------
-+* nat_build_keys
-+*	Note: To call this routine, the key->rule_id MUST be zero
-+*----------------------------------------------------------------------*/
-+static inline int nat_build_keys(NAT_KEY_T *key)
-+{
-+	return hash_gen_crc16((unsigned char *)key, NAT_KEY_SIZE) & HASH_BITS_MASK;
-+}
-+
-+/*----------------------------------------------------------------------
-+* gre_build_keys
-+*	Note: To call this routine, the key->rule_id MUST be zero
-+*----------------------------------------------------------------------*/
-+static inline int gre_build_keys(GRE_KEY_T *key)
-+{
-+	return hash_gen_crc16((unsigned char *)key, GRE_KEY_SIZE) & HASH_BITS_MASK;
-+}
-+
-+/*----------------------------------------------------------------------
-+* nat_write_hash_entry
-+*----------------------------------------------------------------------*/
-+static inline int nat_write_hash_entry(int index, void *hash_entry)
-+{
-+	int		i;
-+	u32		*srcep, *destp, *destp2;
-+
-+	srcep = (u32 *)hash_entry;
-+	destp = destp2 = (u32 *)&hash_tables[index][0];
-+
-+	for (i=0; i<(NAT_HASH_ENTRY_SIZE/sizeof(u32)); i++)
-+		*destp++ = *srcep++;
-+
-+	consistent_sync(destp2, NAT_HASH_ENTRY_SIZE, PCI_DMA_TODEVICE);
-+	return 0;
-+}
-+
-+/*----------------------------------------------------------------------
-+* gre_write_hash_entry
-+*----------------------------------------------------------------------*/
-+static inline int gre_write_hash_entry(int index, void *hash_entry)
-+{
-+	int		i;
-+	u32		*srcep, *destp, *destp2;
-+
-+	srcep = (u32 *)hash_entry;
-+	destp = destp2 = (u32 *)&hash_tables[index][0];
-+
-+	for (i=0; i<(GRE_HASH_ENTRY_SIZE/sizeof(u32)); i++)
-+		*destp++ = *srcep++;
-+
-+	consistent_sync(destp2, GRE_HASH_ENTRY_SIZE, PCI_DMA_TODEVICE);
-+	return 0;
-+}
-+
-+/*----------------------------------------------------------------------
-+* sl351x_nat_find_ipcfg
-+*	return NULL if not found
-+*----------------------------------------------------------------------*/
-+static NAT_IP_ENTRY_T *sl351x_nat_find_ipcfg(u32 ipaddr, int port)
-+{
-+	int				i;
-+	NAT_IP_ENTRY_T	*ipcfg;
-+
-+	ipcfg = (NAT_IP_ENTRY_T *)&nat_cfg.ipcfg[port].entry[0];
-+	for (i=0; iipaddr)
-+		{
-+			return ipcfg;
-+		}
-+	}
-+	return NULL;
-+}
-+
-+/*----------------------------------------------------------------------
-+* sl351x_nat_assign_qid
-+*----------------------------------------------------------------------*/
-+static int sl351x_nat_assign_qid(u8 proto, u32 sip, u32 dip, u16 sport, u16 dport)
-+{
-+	int 				i, total, qid;
-+	NAT_WRULE_ENTRY_T	*entry;
-+
-+	for (qid = 0; qidprotocol || entry->protocol==proto)
-+			{
-+				//if (!entry->sip_start && !entry->dip_start && !entry->sport_start && !entry->dport_start)
-+				//	continue; // UI take care
-+				if (entry->sip_start && !((sip >= entry->sip_start) &&
-+									   (sip <= entry->sip_end)))
-+					continue;
-+				if (entry->dip_start && !((dip >= entry->dip_start) &&
-+									   (dip <= entry->dip_end)))
-+					continue;
-+				if (entry->sport_start && !((sport >= entry->sport_start) &&
-+									   (sport <= entry->sport_end)))
-+					continue;
-+				if (entry->dport_start && !((dport >= entry->dport_start)
-+					 			       && (dport <= entry->dport_end)))
-+					continue;
-+				return qid;
-+			}
-+		}
-+	}
-+	return nat_cfg.default_hw_txq;
-+}
-+
-+/*----------------------------------------------------------------------
-+* sl351x_nat_input
-+*	Handle NAT input frames
-+*	Called by SL351x Driver - Handle Default Rx Queue
-+*	Notes: The caller must make sure that the l3off & l4offset should not be zero.
-+*	SL351x NAT Frames should meet the following conditions:
-+*	1. TCP or UDP frame
-+*	2. Cannot be special ALGs ports which TCP/UDP data is updated
-+*	3. LAN-IN Frames:
-+*		Source IP is in the LAN subnet and Destination is not in the LAN subnet
-+*	4. WAN-IN Frames
-+*		Destination IP is in the WAN port IP
-+*
-+*	Example Ports
-+*	1. TCP/UDP data is updated
-+*		(a) FTP Control Packet
-+*		(b) VoIP Packets
-+*		(c) etc. (add in future)
-+*	2. UDP Low packet rate, not worth
-+*		(b) TFTP Destination Port is 69
-+*		(b) DNS  53
-+*		(c) NTP  123
-+*		(d) etc. (add in future)
-+*----------------------------------------------------------------------*/
-+void sl351x_nat_input(struct sk_buff *skb, int port, void *l3off, void *l4off)
-+{
-+	int 				i, found;
-+	u32					sip, dip;
-+	u16					sport, dport;
-+	struct ethhdr		*ether_hdr;
-+	struct iphdr		*ip_hdr;
-+	struct tcphdr		*tcp_hdr;
-+	struct pppoe_hdr	*pppoe_hdr;
-+	NAT_CB_T			*nat_cb;
-+	u8					proto, pppoe_frame=0;
-+	NAT_CFG_T			*cfg;
-+	u16					ppp_proto;
-+	NAT_IP_ENTRY_T		*ipcfg;
-+	NAT_XPORT_ENTRY_T	*xentry;
-+	GRE_PKTHDR_T		*gre_hdr;
-+#ifdef CONFIG_SL351x_NAT_TCP_UDP
-+	u16 				*port_ptr;
-+#endif
-+
-+	cfg = (NAT_CFG_T *)&nat_cfg;
-+	if (!cfg->enabled || !cfg->ipcfg[port].total)
-+		return;
-+
-+	ip_hdr = (struct iphdr *)&(skb->data[(u32)l3off]);
-+	proto = ip_hdr->protocol;
-+
-+	tcp_hdr = (struct tcphdr *)&(skb->data[(u32)l4off]);
-+	gre_hdr = (GRE_PKTHDR_T *)tcp_hdr;
-+	sport = ntohs(tcp_hdr->source);
-+	dport = ntohs(tcp_hdr->dest);
-+
-+	sip = ntohl(ip_hdr->saddr);
-+	dip = ntohl(ip_hdr->daddr);
-+
-+	if (dip == IPIV(255,255,255,255))
-+		return;
-+
-+	if (port == cfg->lan_port)
-+	{
-+		ipcfg = (NAT_IP_ENTRY_T *)&cfg->ipcfg[port].entry[0];
-+		for (i=0, found=0; iipcfg[port].total; i++, ipcfg++)
-+		{
-+			u32 subnet = ipcfg->ipaddr & ipcfg->netmask;
-+			if (((sip & ipcfg->netmask) == subnet) &&
-+				((dip & ipcfg->netmask) != subnet))
-+			{
-+				found = 1;
-+				break;
-+			}
-+		}
-+		if (!found)
-+			return;
-+	}
-+	else
-+	{
-+#ifndef _NOT_CHECK_SIP_DIP	// enable it if know and get the wan ip address
-+		if (!sl351x_nat_find_ipcfg(dip, port))
-+		{
-+			printk("WAN->LAN Incorrect Dip %d.%d.%d.%d\n", HIPQUAD(dip));
-+			return;
-+		}
-+#endif
-+		ether_hdr = (struct ethhdr *)skb->data;
-+		pppoe_hdr = (struct pppoe_hdr *)(ether_hdr + 1);
-+		ppp_proto = *(u16 *)&pppoe_hdr->tag[0];
-+		if (ether_hdr->h_proto == __constant_htons(ETH_P_PPP_SES)	// 0x8864
-+			&& ppp_proto == __constant_htons(PPP_IP) )				// 0x21
-+		{
-+			pppoe_frame = 1;
-+		}
-+	}
-+
-+#ifdef CONFIG_SL351x_NAT_TCP_UDP
-+	if (proto == IPPROTO_TCP)
-+	{
-+#ifdef	NAT_DEBUG_MSG
-+		nat_printf("From   GMAC-%d: 0x%-4X TCP %d.%d.%d.%d [%d] --> %d.%d.%d.%d [%d]",
-+				port, ntohs(ip_hdr->id),
-+				NIPQUAD(ip_hdr->saddr), sport,
-+				NIPQUAD(ip_hdr->daddr), dport);
-+		if (tcp_flag_word(tcp_hdr) & TCP_FLAG_SYN) nat_printf(" SYN");
-+		if (tcp_flag_word(tcp_hdr) & TCP_FLAG_FIN) nat_printf(" FIN");
-+		if (tcp_flag_word(tcp_hdr) & TCP_FLAG_RST) nat_printf(" RST");
-+		if (tcp_flag_word(tcp_hdr) & TCP_FLAG_ACK) nat_printf(" ACK");
-+		nat_printf("\n");
-+#endif
-+		// if (tcp_flag_word(tcp_hdr) & (TCP_FLAG_SYN | TCP_FLAG_FIN | TCP_FLAG_RST))
-+		if (tcp_flag_word(tcp_hdr) & (TCP_FLAG_SYN))
-+		{
-+			return;
-+		}
-+		port_ptr = fixed_tcp_port_list;
-+		for (i=0; *port_ptr; i++, port_ptr++)
-+		{
-+			if (sport == *port_ptr || dport == *port_ptr)
-+				return;
-+		}
-+#ifdef _HAVE_DYNAMIC_PORT_LIST
-+		port_ptr = dynamic_tcp_port_list;
-+		for (i=0; *port_ptr; i++, port_ptr++)
-+		{
-+			if (sport == *port_ptr || dport == *port_ptr)
-+				return;
-+		}
-+#endif
-+	}
-+	else if (proto == IPPROTO_UDP)
-+	{
-+#ifdef	NAT_DEBUG_MSG
-+		nat_printf("From   GMAC-%d: 0x%-4X UDP %d.%d.%d.%d [%d] --> %d.%d.%d.%d [%d]",
-+				port, ntohs(ip_hdr->id),
-+				NIPQUAD(ip_hdr->saddr), sport,
-+				NIPQUAD(ip_hdr->daddr), dport);
-+		nat_printf("\n");
-+#endif
-+		port_ptr = fixed_udp_port_list;
-+		for (i=0; *port_ptr; i++, port_ptr++)
-+		{
-+			if (sport == *port_ptr || dport == *port_ptr)
-+				return;
-+		}
-+#ifdef _HAVE_DYNAMIC_PORT_LIST
-+		port_ptr = dynamic_udp_port_list;
-+		for (i=0; *port_ptr; i++, port_ptr++)
-+		{
-+			if (sport == *port_ptr || dport == *port_ptr)
-+				return;
-+		}
-+#endif
-+	}
-+	else
-+#endif	// CONFIG_SL351x_NAT_TCP_UDP
-+#ifdef CONFIG_SL351x_NAT_GRE
-+	if (proto == IPPROTO_GRE)
-+	{
-+		if (gre_hdr->protocol != GRE_PROTOCOL_SWAP)
-+			return;
-+#ifdef	NAT_DEBUG_MSG
-+		nat_printf("From   GMAC-%d: 0x%-4X GRE %d.%d.%d.%d [%d] --> %d.%d.%d.%d",
-+				port, ntohs(ip_hdr->id),
-+				NIPQUAD(ip_hdr->saddr), ntohs(gre_hdr->call_id),
-+				NIPQUAD(ip_hdr->daddr));
-+		nat_printf("\n");
-+#endif
-+	}
-+	else
-+#endif
-+		return;
-+
-+
-+	// check xport list
-+	xentry = (NAT_XPORT_ENTRY_T *)&cfg->xport.entry[0];
-+	for (i=0; ixport.total; i++, xentry++)
-+	{
-+		if (!xentry->protocol || xentry->protocol == proto)
-+		{
-+			//if (!xentry->sport_start && !xentry->dport_start) // UI take care
-+			//	continue;
-+			if (xentry->sport_start && !((sport >= xentry->sport_start) &&
-+									   (sport <= xentry->sport_end)))
-+				continue;
-+			if (xentry->dport_start && !((dport >= xentry->dport_start)
-+					 			       && (dport <= xentry->dport_end)))
-+				continue;
-+			return;
-+		}
-+	}
-+
-+	nat_cb = NAT_SKB_CB(skb);
-+	if (((u32)nat_cb & 3))
-+	{
-+		nat_printf("%s ERROR! nat_cb is not alignment!!!!!!\n", __func__);
-+		return;
-+	}
-+	nat_cb->tag = NAT_CB_TAG;
-+	memcpy(nat_cb->sa, skb->data+6, 6);
-+	nat_cb->sip = ip_hdr->saddr;
-+	nat_cb->dip = ip_hdr->daddr;
-+	if (proto == IPPROTO_GRE)
-+	{
-+		nat_cb->sport = gre_hdr->protocol;
-+		nat_cb->dport = gre_hdr->call_id;
-+	}
-+	else
-+	{
-+		nat_cb->sport = tcp_hdr->source;
-+		nat_cb->dport = tcp_hdr->dest;
-+	}
-+	nat_cb->pppoe_frame = pppoe_frame;
-+}
-+
-+/*----------------------------------------------------------------------
-+* sl351x_nat_output
-+*	Handle NAT output frames
-+*	Called by SL351x Driver - Transmit
-+*
-+*	1. If not SL351x NAT frames, return FALSE
-+*	2. LAN-to-WAN frames
-+*		(1) Sip must be WAN IP
-+*	3. If TCP SY/RST/FIN frame, return
-+*	4. Build the hash key and get the hash index
-+*	5. If V-Bit is ON, return.
-+*	6. Write hash entry and validate it
-+*
-+*----------------------------------------------------------------------*/
-+int sl351x_nat_output(struct sk_buff *skb, int port)
-+{
-+	struct iphdr		*ip_hdr;
-+	u8					proto;
-+	NAT_CB_T			*nat_cb;
-+
-+	nat_cb = NAT_SKB_CB(skb);
-+	if (nat_cb->tag != NAT_CB_TAG)
-+		return 0;
-+
-+	if (((u32)nat_cb & 3))
-+	{
-+		nat_printf("%s ERROR! nat_cb is not alignment!!!!!!\n", __func__);
-+		return 0;
-+	}
-+	ip_hdr = (struct iphdr *)skb->h.ipiph;
-+	proto = ip_hdr->protocol;
-+
-+	switch (proto)
-+	{
-+		case IPPROTO_TCP:
-+		case IPPROTO_UDP:
-+			return sl351x_nat_tcp_udp_output(skb, port);
-+		case IPPROTO_GRE:
-+			return sl351x_nat_gre_output(skb, port);
-+	}
-+	return 0;
-+}
-+
-+/*----------------------------------------------------------------------
-+* sl351x_nat_tcp_udp_output
-+*	Handle NAT TCP/UDP output frames
-+*----------------------------------------------------------------------*/
-+int sl351x_nat_tcp_udp_output(struct sk_buff *skb, int port)
-+{
-+	u32					sip, dip;
-+	struct ethhdr		*ether_hdr;
-+	struct iphdr		*ip_hdr;
-+	struct tcphdr		*tcp_hdr;
-+	struct pppoe_hdr	*pppoe_hdr;
-+	NAT_CB_T			*nat_cb;
-+	NAT_CFG_T			*cfg;
-+	u8					proto;
-+	u16					sport, dport, ppp_proto;
-+	u32					hash_data[HASH_MAX_DWORDS];
-+	NAT_HASH_ENTRY_T	*hash_entry;
-+	int					hash_index;
-+	struct ip_conntrack *nat_ip_conntrack;
-+	enum ip_conntrack_info ctinfo;
-+
-+	nat_cb = NAT_SKB_CB(skb);
-+	cfg = (NAT_CFG_T *)&nat_cfg;
-+
-+	ether_hdr = (struct ethhdr *)skb->data;
-+	ip_hdr = (struct iphdr *)skb->h.ipiph;
-+	tcp_hdr = (struct tcphdr *)((u32)ip_hdr + (ip_hdr->ihl<<2));
-+	sip = ntohl(ip_hdr->saddr);
-+	dip = ntohl(ip_hdr->daddr);
-+	proto = ip_hdr->protocol;
-+	sport = ntohs(tcp_hdr->source);
-+	dport = ntohs(tcp_hdr->dest);
-+
-+#ifdef	NAT_DEBUG_MSG
-+	{
-+		nat_printf("To   GMAC-%d: 0x%-4X [%d] %d.%d.%d.%d [%d] --> %d.%d.%d.%d [%d]",
-+				port, ntohs(ip_hdr->id), proto,
-+				NIPQUAD(ip_hdr->saddr), sport,
-+				NIPQUAD(ip_hdr->daddr), dport);
-+		if (proto == IPPROTO_TCP)
-+		{
-+			if (tcp_flag_word(tcp_hdr) & TCP_FLAG_SYN) nat_printf(" SYN");
-+			if (tcp_flag_word(tcp_hdr) & TCP_FLAG_FIN) nat_printf(" FIN");
-+			if (tcp_flag_word(tcp_hdr) & TCP_FLAG_RST) nat_printf(" RST");
-+			if (tcp_flag_word(tcp_hdr) & TCP_FLAG_ACK) nat_printf(" ACK");
-+		}
-+		nat_printf("\n");
-+	}
-+#endif
-+	nat_ip_conntrack = ip_conntrack_get(skb, &ctinfo);
-+	if (!nat_ip_conntrack)
-+	{
-+		nat_printf("IP conntrack info is not found!\n");
-+		return 0;
-+	}
-+	// nat_printf("nat_ip_conntrack = 0x%x, status=0x%lx, ctinfo=%d\n", (u32)nat_ip_conntrack, nat_ip_conntrack->status, ctinfo);
-+	// if (nat_ip_conntrack->master || nat_ip_conntrack->helper)
-+	if (nat_ip_conntrack->helper)
-+	{
-+		nat_printf("Sport=%d Dport=%d master=0x%x, helper=0x%x\n", sport, dport, (u32)nat_ip_conntrack->master, (u32)nat_ip_conntrack->helper);
-+		return 0;
-+	}
-+
-+	//if (proto == IPPROTO_TCP && !(nat_ip_conntrack->status & IPS_ASSURED))
-+	//	return 0;
-+
-+#ifdef	NAT_DEBUG_MSG
-+	nat_printf("nat_ip_conntrack=0x%x, nat_cb->state=%d\n", (u32)nat_ip_conntrack, nat_cb->state);
-+	nat_printf("lan2wan_hash_index=%d,  wan2lan_hash_index=%d\n", nat_ip_conntrack->lan2wan_hash_index, nat_ip_conntrack->wan2lan_hash_index);
-+	nat_printf("lan2wan_collision=%d, wan2lan_collision=%d\n", nat_ip_conntrack->lan2wan_collision, nat_ip_conntrack->wan2lan_collision);
-+#endif
-+	if (proto == IPPROTO_TCP)
-+	{
-+		if (nat_cb->state >= TCP_CONNTRACK_FIN_WAIT && nat_cb->state <= TCP_CONNTRACK_CLOSE)
-+		{
-+			if 	(nat_ip_conntrack->lan2wan_hash_index)
-+			{
-+#ifdef	NAT_DEBUG_MSG
-+				nat_printf("Invalidate LAN->WAN hash entry %d\n", nat_ip_conntrack->lan2wan_hash_index - 1);
-+#endif
-+				hash_nat_disable_owner(nat_ip_conntrack->lan2wan_hash_index - 1);
-+				hash_invalidate_entry(nat_ip_conntrack->lan2wan_hash_index - 1);
-+				nat_ip_conntrack->lan2wan_hash_index = 0;
-+			}
-+			if 	(nat_ip_conntrack->wan2lan_hash_index)
-+			{
-+#ifdef	NAT_DEBUG_MSG
-+				nat_printf("Invalidate WAN->LAN hash entry %d\n", nat_ip_conntrack->wan2lan_hash_index - 1);
-+#endif
-+				hash_nat_disable_owner(nat_ip_conntrack->wan2lan_hash_index - 1);
-+				hash_invalidate_entry(nat_ip_conntrack->wan2lan_hash_index - 1);
-+				nat_ip_conntrack->wan2lan_hash_index = 0;
-+			}
-+			return 0;
-+
-+		}
-+		else if (nat_cb->state != TCP_CONNTRACK_ESTABLISHED)
-+		{
-+			return 0;
-+		}
-+	}
-+	if (proto == IPPROTO_TCP && (tcp_flag_word(tcp_hdr) & (TCP_FLAG_SYN | TCP_FLAG_FIN | TCP_FLAG_RST)))
-+	// if (proto == IPPROTO_TCP &&  (tcp_flag_word(tcp_hdr) & (TCP_FLAG_SYN)))
-+		return 0;
-+
-+	hash_entry = (NAT_HASH_ENTRY_T *)&hash_data;
-+	if (port == cfg->wan_port)	// LAN-to-WAN
-+	{
-+		if (nat_ip_conntrack->lan2wan_hash_index || nat_ip_conntrack->lan2wan_collision)
-+			return 0;
-+#ifndef _NOT_CHECK_SIP_DIP	// enable it if know and get the wan ip address
-+		if (!sl351x_nat_find_ipcfg(sip, port))
-+		{
-+			printk("LAN->WAN Incorrect Sip %d.%d.%d.%d\n", HIPQUAD(sip));
-+			return 0;
-+		}
-+#endif
-+		// Note: unused fields (including rule_id) MUST be zero
-+		hash_entry->key.Ethertype 	= 0;
-+		hash_entry->key.port_id 	= cfg->lan_port;
-+		hash_entry->key.rule_id 	= 0;
-+		hash_entry->key.ip_protocol = proto;
-+		hash_entry->key.reserved1 	= 0;
-+		hash_entry->key.reserved2 	= 0;
-+		hash_entry->key.sip 		= ntohl(nat_cb->sip);
-+		hash_entry->key.dip 		= ntohl(nat_cb->dip);
-+		hash_entry->key.sport 		= nat_cb->sport;
-+		hash_entry->key.dport 		= nat_cb->dport;
-+
-+		hash_index = nat_build_keys(&hash_entry->key);
-+
-+#ifdef NAT_DEBUG_LAN_HASH_TIMEOUT
-+		if (hash_get_nat_owner_flag(hash_index))
-+			return 0;
-+#endif
-+		if (hash_get_valid_flag(hash_index))
-+		{
-+			nat_ip_conntrack->lan2wan_collision = 1;
-+			nat_collision++;
-+#if 0
-+			if (proto == IPPROTO_TCP && (tcp_flag_word(tcp_hdr) & (TCP_FLAG_FIN | TCP_FLAG_RST)))
-+			{
-+				if (memcmp((void *)&hash_entry->key, hash_get_entry(hash_index), sizeof(NAT_KEY_T)) == 0)
-+				{
-+   					hash_nat_disable_owner(hash_index);
-+ 					hash_invalidate_entry(hash_index); // Must last one, else HW Tx fast SW
-+ 					// nat_printf("Invalidate nat hash entry %d\n", hash_index);
-+ 				}
-+			}
-+#endif
-+			return 0;
-+		}
-+
-+		// write hash entry
-+		hash_entry->key.rule_id = cfg->tcp_udp_rule_id;
-+		memcpy(hash_entry->param.da, skb->data, 6);
-+		memcpy(hash_entry->param.sa, skb->data+6, 6);
-+		hash_entry->param.Sip = sip;
-+		hash_entry->param.Dip = dip;
-+		hash_entry->param.Sport = sport;
-+		hash_entry->param.Dport = dport;
-+		hash_entry->param.vlan = 0;
-+		hash_entry->param.sw_id = 0;
-+		hash_entry->param.mtu = 0;
-+		// check PPPoE
-+		pppoe_hdr = (struct pppoe_hdr *)(ether_hdr + 1);
-+		ppp_proto = *(u16 *)&pppoe_hdr->tag[0];
-+		if (ether_hdr->h_proto == __constant_htons(ETH_P_PPP_SES)	// 0x8864
-+			&& ppp_proto == __constant_htons(PPP_IP) )				// 0x21
-+		{
-+			hash_entry->action.dword = NAT_PPPOE_LAN2WAN_ACTIONS;
-+			hash_entry->param.pppoe = htons(pppoe_hdr->sid);
-+		}
-+		else
-+		{
-+			hash_entry->action.dword = NAT_LAN2WAN_ACTIONS;
-+			hash_entry->param.pppoe = 0;
-+		}
-+		hash_entry->action.bits.dest_qid = sl351x_nat_assign_qid(proto, sip, dip, sport, dport);
-+		hash_entry->action.bits.dest_qid +=	(cfg->wan_port==0) ? TOE_GMAC0_HW_TXQ0_QID : TOE_GMAC1_HW_TXQ0_QID;
-+		hash_entry->tmo.counter = hash_entry->tmo.interval =
-+						(proto == IPPROTO_TCP) ? cfg->tcp_tmo_interval : cfg->udp_tmo_interval;
-+		nat_write_hash_entry(hash_index, hash_entry);
-+		// nat_printf("%lu Validate a LAN hash entry %d\n", jiffies/HZ, hash_index);
-+		// hash_dump_entry(hash_index);
-+		hash_nat_enable_owner(hash_index);
-+		hash_validate_entry(hash_index); // Must last one, else HW Tx fast than SW
-+ 		nat_ip_conntrack->lan2wan_hash_index = hash_index + 1;
-+ 		nat_ip_conntrack->hw_nat |= 1;
-+		return 0;
-+	}
-+	else // WAN-to-LAN
-+	{
-+		if (nat_ip_conntrack->wan2lan_hash_index || nat_ip_conntrack->wan2lan_collision)
-+			return 0;
-+
-+		// Note: unused fields (including rule_id) MUST be zero
-+		hash_entry->key.Ethertype 	= 0;
-+		hash_entry->key.port_id 	= cfg->wan_port;
-+		hash_entry->key.rule_id 	= 0;
-+		hash_entry->key.ip_protocol = proto;
-+		hash_entry->key.reserved1 	= 0;
-+		hash_entry->key.reserved2 	= 0;
-+		hash_entry->key.sip 		= ntohl(nat_cb->sip);
-+		hash_entry->key.dip 		= ntohl(nat_cb->dip);
-+		hash_entry->key.sport 		= nat_cb->sport;
-+		hash_entry->key.dport 		= nat_cb->dport;
-+
-+		hash_index = nat_build_keys(&hash_entry->key);
-+
-+#ifdef NAT_DEBUG_WAN_HASH_TIMEOUT
-+		if (hash_get_nat_owner_flag(hash_index))
-+			return 0;
-+#endif
-+		if (hash_get_valid_flag(hash_index))
-+		{
-+			nat_ip_conntrack->wan2lan_collision = 1;
-+			nat_collision++;
-+#if 0
-+			if (proto == IPPROTO_TCP && (tcp_flag_word(tcp_hdr) & (TCP_FLAG_FIN | TCP_FLAG_RST)))
-+			{
-+				if (memcmp((void *)&hash_entry->key, hash_get_entry(hash_index), sizeof(NAT_KEY_T)) == 0)
-+				{
-+   					hash_nat_disable_owner(hash_index);
-+ 					hash_invalidate_entry(hash_index); // Must last one, else HW Tx fast SW
-+  					// nat_printf("Invalidate nat hash entry %d\n", hash_index);
-+				}
-+			}
-+#endif
-+			return 0;
-+		}
-+
-+		// write hash entry
-+		hash_entry->key.rule_id = cfg->tcp_udp_rule_id;
-+		memcpy(hash_entry->param.da, skb->data, 6);
-+		memcpy(hash_entry->param.sa, skb->data+6, 6);
-+		hash_entry->param.Sip = sip;
-+		hash_entry->param.Dip = dip;
-+		hash_entry->param.Sport = sport;
-+		hash_entry->param.Dport = dport;
-+		hash_entry->param.vlan = 0;
-+		hash_entry->param.pppoe = 0;
-+		hash_entry->param.sw_id = 0;
-+		hash_entry->param.mtu = 0;
-+		hash_entry->action.dword = (nat_cb->pppoe_frame) ? NAT_PPPOE_WAN2LAN_ACTIONS : NAT_WAN2LAN_ACTIONS;
-+		hash_entry->action.bits.dest_qid = sl351x_nat_assign_qid(proto, sip, dip, sport, dport);
-+		hash_entry->action.bits.dest_qid += (cfg->lan_port==0) ? TOE_GMAC0_HW_TXQ0_QID : TOE_GMAC1_HW_TXQ0_QID;;
-+		hash_entry->tmo.counter = hash_entry->tmo.interval =
-+						(proto == IPPROTO_TCP) ? cfg->tcp_tmo_interval : cfg->udp_tmo_interval;
-+		nat_write_hash_entry(hash_index, hash_entry);
-+
-+		// nat_printf("%lu Validate a WAN hash entry %d\n", jiffies/HZ, hash_index);
-+		// hash_dump_entry(hash_index);
-+   		hash_nat_enable_owner(hash_index);
-+ 		hash_validate_entry(hash_index); // Must last one, else HW Tx fast SW
-+ 		nat_ip_conntrack->wan2lan_hash_index = hash_index + 1;
-+ 		nat_ip_conntrack->hw_nat |= 2;
-+		return 0;
-+	}
-+	return 0;
-+}
-+
-+/*----------------------------------------------------------------------
-+* sl351x_nat_gre_output
-+*	Handle NAT GRE output frames
-+*----------------------------------------------------------------------*/
-+int sl351x_nat_gre_output(struct sk_buff *skb, int port)
-+{
-+	u32					sip, dip;
-+	struct ethhdr		*ether_hdr;
-+	struct iphdr		*ip_hdr;
-+	struct pppoe_hdr	*pppoe_hdr;
-+	GRE_PKTHDR_T		*gre_hdr;
-+	NAT_CB_T			*nat_cb;
-+	NAT_CFG_T			*cfg;
-+	u16					ppp_proto;
-+	u32					hash_data[HASH_MAX_DWORDS];
-+	GRE_HASH_ENTRY_T	*hash_entry;
-+	int					hash_index;
-+	struct ip_conntrack *nat_ip_conntrack;
-+	enum ip_conntrack_info ctinfo;
-+
-+	nat_cb = NAT_SKB_CB(skb);
-+	cfg = (NAT_CFG_T *)&nat_cfg;
-+
-+	ether_hdr = (struct ethhdr *)skb->data;
-+	ip_hdr = (struct iphdr *)skb->h.ipiph;
-+	gre_hdr = (GRE_PKTHDR_T *)((u32)ip_hdr + (ip_hdr->ihl<<2));
-+	sip = ntohl(ip_hdr->saddr);
-+	dip = ntohl(ip_hdr->daddr);
-+
-+#ifdef	NAT_DEBUG_MSG
-+	{
-+		nat_printf("To   GMAC-%d: 0x%-4X GRE %d.%d.%d.%d [%d] --> %d.%d.%d.%d",
-+				port, ntohs(ip_hdr->id),
-+				NIPQUAD(ip_hdr->saddr), ntohs(gre_hdr->call_id),
-+				NIPQUAD(ip_hdr->daddr));
-+		nat_printf("\n");
-+	}
-+#endif
-+	nat_ip_conntrack = ip_conntrack_get(skb, &ctinfo);
-+	if (nat_ip_conntrack)
-+	{
-+		// if (nat_ip_conntrack->master || nat_ip_conntrack->helper)
-+		if (nat_ip_conntrack->helper)
-+		{
-+			nat_printf("GRE Call-ID=%d, master=0x%x, helper=0x%x\n", ntohs(gre_hdr->call_id), (u32)nat_ip_conntrack->master, (u32)nat_ip_conntrack->helper);
-+			return 0;
-+		}
-+		if (!(nat_ip_conntrack->status & IPS_ASSURED))
-+			return 0;
-+	}
-+
-+	hash_entry = (GRE_HASH_ENTRY_T *)&hash_data;
-+	if (port == cfg->wan_port)	// LAN-to-WAN
-+	{
-+#ifdef _NOT_CHECK_SIP_DIP	// enable it if know and get the wan ip address
-+		if (!sl351x_nat_find_ipcfg(sip, port))
-+		{
-+			printk("LAN->WAN Incorrect Sip %d.%d.%d.%d\n", HIPQUAD(sip));
-+			return 0;
-+		}
-+#endif
-+		// Note: unused fields (including rule_id) MUST be zero
-+		hash_entry->key.Ethertype 	= 0;
-+		hash_entry->key.port_id 	= cfg->lan_port;
-+		hash_entry->key.rule_id 	= 0;
-+		hash_entry->key.ip_protocol = IPPROTO_GRE;
-+		hash_entry->key.reserved1 	= 0;
-+		hash_entry->key.reserved2 	= 0;
-+		hash_entry->key.reserved3 	= 0;
-+		hash_entry->key.reserved4 	= 0;
-+		hash_entry->key.sip 		= ntohl(nat_cb->sip);
-+		hash_entry->key.dip 		= ntohl(nat_cb->dip);
-+		hash_entry->key.protocol	= nat_cb->sport;
-+		hash_entry->key.call_id 	= nat_cb->dport;
-+
-+		hash_index = gre_build_keys(&hash_entry->key);
-+
-+#ifdef NAT_DEBUG_LAN_HASH_TIMEOUT
-+		if (hash_get_nat_owner_flag(hash_index))
-+			return 0;
-+#endif
-+		if (hash_get_valid_flag(hash_index))
-+		{
-+			return 0;
-+		}
-+
-+		// write hash entry
-+		hash_entry->key.rule_id = cfg->gre_rule_id;
-+		memcpy(hash_entry->param.da, skb->data, 6);
-+		memcpy(hash_entry->param.sa, skb->data+6, 6);
-+		hash_entry->param.Sip = sip;
-+		hash_entry->param.Dip = dip;
-+		hash_entry->param.Sport = 0;
-+		hash_entry->param.Dport = ntohs(gre_hdr->call_id);
-+		hash_entry->param.vlan = 0;
-+		hash_entry->param.sw_id = 0;
-+		hash_entry->param.mtu = 0;
-+		// check PPPoE
-+		pppoe_hdr = (struct pppoe_hdr *)(ether_hdr + 1);
-+		ppp_proto = *(u16 *)&pppoe_hdr->tag[0];
-+		if (ether_hdr->h_proto == __constant_htons(ETH_P_PPP_SES)	// 0x8864
-+			&& ppp_proto == __constant_htons(PPP_IP) )				// 0x21
-+		{
-+			hash_entry->action.dword = NAT_PPPOE_PPTP_LAN2WAN_ACTIONS;
-+			hash_entry->param.pppoe = htons(pppoe_hdr->sid);
-+		}
-+		else
-+		{
-+			hash_entry->action.dword = NAT_PPTP_LAN2WAN_ACTIONS;
-+			hash_entry->param.pppoe = 0;
-+		}
-+		hash_entry->action.bits.dest_qid = sl351x_nat_assign_qid(IPPROTO_GRE, sip, dip, 0, ntohs(gre_hdr->call_id));
-+		hash_entry->action.bits.dest_qid +=	(cfg->wan_port==0) ? TOE_GMAC0_HW_TXQ0_QID : TOE_GMAC1_HW_TXQ0_QID;
-+		hash_entry->tmo.counter = hash_entry->tmo.interval = cfg->gre_tmo_interval;
-+		gre_write_hash_entry(hash_index, hash_entry);
-+		// nat_printf("%lu Validate a LAN hash entry %d\n", jiffies/HZ, hash_index);
-+		// hash_dump_entry(hash_index);
-+		hash_nat_enable_owner(hash_index);
-+		hash_validate_entry(hash_index); // Must last one, else HW Tx fast than SW
-+		return 0;
-+	}
-+	else // WAN-to-LAN
-+	{
-+		// Note: unused fields (including rule_id) MUST be zero
-+		hash_entry->key.Ethertype 	= 0;
-+		hash_entry->key.port_id 	= cfg->wan_port;
-+		hash_entry->key.rule_id 	= 0;
-+		hash_entry->key.ip_protocol = IPPROTO_GRE;
-+		hash_entry->key.reserved1 	= 0;
-+		hash_entry->key.reserved2 	= 0;
-+		hash_entry->key.reserved3 	= 0;
-+		hash_entry->key.reserved4 	= 0;
-+		hash_entry->key.sip 		= ntohl(nat_cb->sip);
-+		hash_entry->key.dip 		= ntohl(nat_cb->dip);
-+		hash_entry->key.protocol	= nat_cb->sport;
-+		hash_entry->key.call_id		= nat_cb->dport;
-+
-+		hash_index = gre_build_keys(&hash_entry->key);
-+
-+#ifdef NAT_DEBUG_WAN_HASH_TIMEOUT
-+		if (hash_get_nat_owner_flag(hash_index))
-+			return 0;
-+#endif
-+		if (hash_get_valid_flag(hash_index))
-+		{
-+			return 0;
-+		}
-+
-+		// write hash entry
-+		hash_entry->key.rule_id = cfg->gre_rule_id;
-+		memcpy(hash_entry->param.da, skb->data, 6);
-+		memcpy(hash_entry->param.sa, skb->data+6, 6);
-+		hash_entry->param.Sip = sip;
-+		hash_entry->param.Dip = dip;
-+		hash_entry->param.Sport = 0;
-+		hash_entry->param.Dport = ntohs(gre_hdr->call_id);
-+		hash_entry->param.vlan = 0;
-+		hash_entry->param.pppoe = 0;
-+		hash_entry->param.sw_id = 0;
-+		hash_entry->param.mtu = 0;
-+		hash_entry->action.dword = (nat_cb->pppoe_frame) ? NAT_PPPOE_PPTP_WAN2LAN_ACTIONS : NAT_PPTP_WAN2LAN_ACTIONS;
-+		hash_entry->action.bits.dest_qid = sl351x_nat_assign_qid(IPPROTO_GRE, sip, dip, 0, ntohs(gre_hdr->call_id));
-+		hash_entry->action.bits.dest_qid += (cfg->lan_port==0) ? TOE_GMAC0_HW_TXQ0_QID : TOE_GMAC1_HW_TXQ0_QID;;
-+		hash_entry->tmo.counter = hash_entry->tmo.interval = cfg->gre_tmo_interval;
-+		gre_write_hash_entry(hash_index, hash_entry);
-+
-+		// nat_printf("%lu Validate a WAN hash entry %d\n", jiffies/HZ, hash_index);
-+		// hash_dump_entry(hash_index);
-+   		hash_nat_enable_owner(hash_index);
-+ 		hash_validate_entry(hash_index); // Must last one, else HW Tx fast SW
-+		return 0;
-+	}
-+	return 0;
-+}
-+
-+
-+#ifdef _HAVE_DYNAMIC_PORT_LIST
-+/*----------------------------------------------------------------------
-+* sl_nat_add_port
-+*----------------------------------------------------------------------*/
-+void sl_nat_add_port(u8 protocol, u16 port)
-+{
-+	int 	i;
-+	u16		*port_ptr;
-+
-+	if (protocol == IPPROTO_TCP)
-+		port_ptr = dynamic_tcp_port_list;
-+	else if (protocol == IPPROTO_UDP)
-+		port_ptr = dynamic_udp_port_list;
-+	else
-+		return;
-+
-+	for (i=0; *port_ptr; i++)
-+	{
-+		if (port == *port_ptr)
-+			return;
-+		port_ptr++;
-+	}
-+	port_ptr++;
-+	*port_ptr = port;
-+}
-+
-+/*----------------------------------------------------------------------
-+* sl_nat_remove_port
-+*----------------------------------------------------------------------*/
-+void sl_nat_remove_port(u8 protocol, u16 port)
-+{
-+	int 	i, j;
-+	u16		*port_ptr, *next;
-+
-+	if (protocol == IPPROTO_TCP)
-+		port_ptr = dynamic_tcp_port_list;
-+	else if (protocol == IPPROTO_UDP)
-+		port_ptr = dynamic_udp_port_list;
-+	else
-+		return;
-+
-+	for (i=0; *port_ptr; i++, port_ptr++)
-+	{
-+		if (port == *port_ptr)
-+		{
-+			port_next = port_ptr + 1;
-+			for (j=i+1; *port_next; i++, j++)
-+				*port_ptr++ = *port_next++;
-+			*port_ptr = 0;
-+			return;
-+		}
-+	}
-+}
-+#endif
-+
-+/*----------------------------------------------------------------------
-+* sl351x_nat_ioctl
-+*----------------------------------------------------------------------*/
-+int sl351x_nat_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
-+{
-+	GMAC_INFO_T 		*tp = (GMAC_INFO_T *)dev->priv;
-+	int 				i, j, port_id;
-+    NATCMD_HDR_T		nat_hdr;
-+    NAT_REQ_E			ctrl;
-+	unsigned char		*req_datap;
-+	NAT_IP_ENTRY_T		*ipcfg;
-+	NAT_XPORT_ENTRY_T	*xport_entry;
-+	NAT_WRULE_ENTRY_T	*wrule_entry;
-+	unsigned int		qid;
-+
-+	if (copy_from_user((void *)&nat_hdr, rq->ifr_data, sizeof(nat_hdr)))
-+		return -EFAULT;
-+	req_datap = (unsigned char *)rq->ifr_data + sizeof(nat_hdr);
-+	port_id = tp->port_id;
-+	switch (nat_hdr.cmd) {
-+	case NATSSTATUS:
-+		if (!capable(CAP_NET_ADMIN))
-+			return -EPERM;
-+		if (nat_hdr.len != sizeof(NAT_STATUS_T))
-+			return -EPERM;
-+		if (copy_from_user((void *)&ctrl.status, req_datap, sizeof(ctrl.status)))
-+			return -EFAULT;
-+		if (ctrl.status.enable != 0 && ctrl.status.enable != 1)
-+			return -EPERM;
-+		// sl351x_nat_set_enabled_flag(ctrl.status.enable);
-+		if (nat_cfg.enabled && (ctrl.status.enable == 0))
-+		{
-+			for (i=0; i= CONFIG_NAT_MAX_IP_NUM)
-+			return -E2BIG;
-+		if (copy_from_user((void *)&nat_cfg.ipcfg[port_id].entry[i], req_datap, sizeof(NAT_IPCFG_T)))
-+			return -EFAULT;
-+		nat_cfg.ipcfg[port_id].total++;
-+		break;
-+	case NATDELIP:
-+		if (!capable(CAP_NET_ADMIN))
-+			return -EPERM;
-+		if (nat_hdr.len != sizeof(NAT_IPCFG_T))
-+			return -EPERM;
-+		if (copy_from_user((void *)&ctrl.ipcfg, req_datap, sizeof(ctrl.ipcfg)))
-+			return -EFAULT;
-+		ipcfg = (NAT_IP_ENTRY_T *)&nat_cfg.ipcfg[port_id].entry[0];
-+		for (i=0; iipaddr == ctrl.ipcfg.entry.ipaddr)
-+			{
-+				NAT_IP_ENTRY_T *ipcfg_next;
-+				ipcfg_next = ipcfg + 1;
-+				for (j=i+1; j < nat_cfg.ipcfg[port_id].total; i++, j++)
-+				{
-+					memcpy((void *)ipcfg, (void *)ipcfg_next, sizeof(NAT_IP_ENTRY_T));
-+					ipcfg++;
-+					ipcfg_next++;
-+				}
-+				ipcfg->ipaddr = 0;
-+				ipcfg->netmask = 0;
-+				nat_cfg.ipcfg[port_id].total--;
-+				return 0;
-+			}
-+		}
-+		return -ENOENT;
-+	case NATGETIP:
-+		if (nat_hdr.len != sizeof(NAT_IPCFG_ALL_T))
-+			return -EPERM;
-+		if (copy_to_user(req_datap, (void *)&nat_cfg.ipcfg[port_id], sizeof(NAT_IPCFG_ALL_T)))
-+			return -EFAULT;
-+		break;
-+	case NATAXPORT:
-+		if (!capable(CAP_NET_ADMIN))
-+			return -EPERM;
-+		if (nat_hdr.len != sizeof(NAT_XPORT_T))
-+			return -EPERM;
-+		i = nat_cfg.xport.total;
-+		if (i >= CONFIG_NAT_MAX_XPORT)
-+			return -E2BIG;
-+		if (copy_from_user((void *)&nat_cfg.xport.entry[i], req_datap, sizeof(NAT_XPORT_T)))
-+			return -EFAULT;
-+		nat_cfg.xport.total++;
-+		break;
-+	case NATDXPORT:
-+		if (!capable(CAP_NET_ADMIN))
-+			return -EPERM;
-+		if (nat_hdr.len != sizeof(NAT_XPORT_T))
-+			return -EPERM;
-+		if (copy_from_user((void *)&ctrl.xport, req_datap, sizeof(NAT_XPORT_T)))
-+			return -EFAULT;
-+		xport_entry = (NAT_XPORT_ENTRY_T *)&nat_cfg.xport.entry[0];
-+		for (i=0; i CONFIG_NAT_TXQ_NUM)
-+			return -EPERM;
-+		i = nat_cfg.wrule[qid].total;
-+		if (i >= CONFIG_NAT_MAX_WRULE)
-+			return -E2BIG;
-+		if (copy_from_user((void *)&nat_cfg.wrule[qid].entry[i], req_datap+sizeof(qid), sizeof(NAT_WRULE_T)))
-+			return -EFAULT;
-+		nat_cfg.wrule[qid].total++;
-+		break;
-+	case NATDWRULE:
-+		if (!capable(CAP_NET_ADMIN))
-+			return -EPERM;
-+		if (nat_hdr.len != sizeof(NAT_WRULE_T))
-+			return -EPERM;
-+		if (copy_from_user((void *)&ctrl.wrule, req_datap, sizeof(NAT_WRULE_T)))
-+			return -EFAULT;
-+		qid = ctrl.wrule.qid;
-+		if (qid >= CONFIG_NAT_TXQ_NUM)
-+			return -EPERM;
-+		wrule_entry = (NAT_WRULE_ENTRY_T *)&nat_cfg.wrule[qid].entry[0];
-+		for (i=0; i= CONFIG_NAT_TXQ_NUM)
-+			return -EPERM;
-+		if (copy_to_user(req_datap, (void *)&nat_cfg.wrule[qid], sizeof(NAT_WRULE_ALL_T)))
-+			return -EFAULT;
-+		break;
-+	case NATSDEFQ:
-+		if (!capable(CAP_NET_ADMIN))
-+			return -EPERM;
-+		if (nat_hdr.len != sizeof(NAT_QUEUE_T))
-+			return -EPERM;
-+		if (copy_from_user((void *)&nat_cfg.default_hw_txq, req_datap, sizeof(u32)))
-+			return -EFAULT;
-+		break;
-+	case NATGDEFQ:
-+		if (nat_hdr.len != sizeof(NAT_QUEUE_T))
-+			return -EPERM;
-+		if (copy_to_user(req_datap, (void *)&nat_cfg.default_hw_txq, sizeof(u32)))
-+			return -EFAULT;
-+	case NATRMIPCFG:
-+		nat_cfg.ipcfg[port_id].total = 0;
-+		break;
-+	case NATTESTENTRY:
-+		if (!capable(CAP_NET_ADMIN))
-+			return -EPERM;
-+		if (nat_hdr.len != sizeof(NAT_TESTENTRY_T))
-+			return -EPERM;
-+		if (copy_from_user((void *)&ctrl.init_entry, req_datap, sizeof(ctrl.init_entry)))
-+			return -EFAULT;
-+		if (ctrl.init_entry.init_enable != 0 && ctrl.init_entry.init_enable != 1)
-+			return -EPERM;
-+		nat_cfg.init_enabled = ctrl.init_entry.init_enable;
-+		break;
-+
-+	default:
-+		return -EPERM;
-+	}
-+
-+	return 0;
-+}
-+
-+/*----------------------------------------------------------------------
-+* 	nat_init_test_entry
-+*	Initialize NAT test hash entries
-+*
-+*	SmartBits P1  -----> Lepus GMAC 0 --------------+
-+*													|
-+*													|
-+*             P3  <----- Lepus GMAC 1 -- HW TxQ0 <--+
-+*									  -- HW TxQ1 <--+
-+*									  -- HW TxQ2 <--+
-+*									  -- HW TxQ3 <--+
-+*
-+*	SmartBits P1  <----- Lepus GMAC 0 -- HW TxQ0 <--+
-+*									  -- HW TxQ1 <--+
-+*                                     -- HW TxQ2 <--+
-+*									  -- HW TxQ3 <--+
-+*													|
-+*													|
-+*             P3  -----> Lepus GMAC 1 --------------+
-+*
-+*   LAN GMAC0 <--------------------------------------------> GMAC1 WAN
-+*	192.168.[x].[y]:50 --> 168.95.[x].[y]:80 ---TXQ[y-1]---> 192.168.2.254:200[y] --> 168.95.[x].[y]:80
-+*	192.168.[x].[y]:50 <-- 168.95.[x].[y]:80 <--TXQ[y-1]---- 192.168.2.254:200[y] <-- 168.95.[x].[y]:80
-+*   where:
-+*		[x] : Packet Type
-+*		[y] : Tx Queue, 1 for TxQ0, 2 for TxQ1, 3 for TxQ2, 4 for TxQ3,
-+*
-+*
-+* Packet Type:
-+* 1. TCP Frames <---> TCP Frames
-+*   LAN GMAC0 <--------------------------------> GMAC1 WAN
-+*	192.168.1.1:50 --> 168.95.1.1:80 ---TXQ0---> 192.168.2.254:2001 --> 168.95.1.1:80
-+*	192.168.1.1:50 <-- 168.95.1.1:80 <--TXQ0---- 192.168.2.254:2001 <-- 168.95.1.1:80
-+*
-+*	192.168.1.2:50 --> 168.95.1.2:80 ---TXQ1---> 192.168.2.254:2002 --> 168.95.1.2:80
-+*	192.168.1.2:50 <-- 168.95.1.2:80 <--TXQ1---- 192.168.2.254:2002 <-- 168.95.1.2:80
-+*
-+*	192.168.1.3:50 --> 168.95.1.3:80 ---TXQ2---> 192.168.2.254:2003 --> 168.95.1.3:80
-+*	192.168.1.3:50 <-- 168.95.1.3:80 <--TXQ2---- 192.168.2.254:2003 <-- 168.95.1.3:80
-+*
-+*	192.168.1.4:50 --> 168.95.1.4:80 ---TXQ3---> 192.168.2.254:2004 --> 168.95.1.4:80
-+*	192.168.1.4:50 <-- 168.95.1.4:80 <--TXQ3---- 192.168.2.254:2004 <-- 168.95.1.4:80
-+*
-+* 2 TCP Frames <----> PPPoE + TCP Frames
-+*   LAN GMAC0 <--------------------------------> GMAC1 WAN
-+*	192.168.2.1:50 --> 168.95.2.1:80 ---TXQ0---> 192.168.2.254:2001 --> 168.95.2.1:80
-+*	192.168.2.1:50 <-- 168.95.2.1:80 <--TXQ0---- 192.168.2.254:2001 <-- 168.95.2.1:80
-+*
-+*	192.168.2.2:50 --> 168.95.2.2:80 ---TXQ1---> 192.168.2.254:2002 --> 168.95.2.2:80
-+*	192.168.2.2:50 <-- 168.95.2.2:80 <--TXQ1---- 192.168.2.254:2002 <-- 168.95.2.2:80
-+*
-+*	192.168.2.3:50 --> 168.95.2.3:80 ---TXQ2---> 192.168.2.254:2003 --> 168.95.2.3:80
-+*	192.168.2.3:50 <-- 168.95.2.3:80 <--TXQ2---- 192.168.2.254:2003 <-- 168.95.2.3:80
-+*
-+*	192.168.2.4:50 --> 168.95.2.4:80 ---TXQ3---> 192.168.2.254:2004 --> 168.95.2.4:80
-+*	192.168.2.4:50 <-- 168.95.2.4:80 <--TXQ3---- 192.168.2.254:2004 <-- 168.95.2.4:80
-+*
-+* 3 TCP Frames <----> VLAN + PPPoE + TCP Frames
-+*   LAN GMAC0 <--------------------------------> GMAC1 WAN
-+*	192.168.3.1:50 --> 168.95.3.1:80 ---TXQ0---> 192.168.2.254:2001 --> 168.95.3.1:80
-+*	192.168.3.1:50 <-- 168.95.3.1:80 <--TXQ0---- 192.168.2.254:2001 <-- 168.95.3.1:80
-+*
-+*	192.168.3.2:50 --> 168.95.3.2:80 ---TXQ1---> 192.168.2.254:2002 --> 168.95.3.2:80
-+*	192.168.3.2:50 <-- 168.95.3.2:80 <--TXQ1---- 192.168.2.254:2002 <-- 168.95.3.2:80
-+*
-+*	192.168.3.3:50 --> 168.95.3.3:80 ---TXQ2---> 192.168.2.254:2003 --> 168.95.3.3:80
-+*	192.168.3.3:50 <-- 168.95.3.3:80 <--TXQ2---- 192.168.2.254:2003 <-- 168.95.3.3:80
-+*
-+*	192.168.3.4:50 --> 168.95.3.4:80 ---TXQ3---> 192.168.2.254:2004 --> 168.95.3.4:80
-+*	192.168.3.4:50 <-- 168.95.3.4:80 <--TXQ3---- 192.168.2.254:2004 <-- 168.95.3.4:80
-+*
-+* 4 VLAN-A + TCP Frames <----> VLAN-B + PPPoE + TCP Frames
-+*   LAN GMAC0 <--------------------------------> GMAC1 WAN
-+*	192.168.4.1:50 --> 168.95.4.1:80 ---TXQ0---> 192.168.2.254:2001 --> 168.95.4.1:80
-+*	192.168.4.1:50 <-- 168.95.4.1:80 <--TXQ0---- 192.168.2.254:2001 <-- 168.95.4.1:80
-+*
-+*	192.168.4.2:50 --> 168.95.4.2:80 ---TXQ1---> 192.168.2.254:2002 --> 168.95.4.2:80
-+*	192.168.4.2:50 <-- 168.95.4.2:80 <--TXQ1---- 192.168.2.254:2002 <-- 168.95.4.2:80
-+*
-+*	192.168.4.3:50 --> 168.95.4.3:80 ---TXQ2---> 192.168.2.254:2003 --> 168.95.4.3:80
-+*	192.168.4.3:50 <-- 168.95.4.3:80 <--TXQ2---- 192.168.2.254:2003 <-- 168.95.4.3:80
-+*
-+*	192.168.4.4:50 --> 168.95.4.4:80 ---TXQ3---> 192.168.2.254:2004 --> 168.95.4.4:80
-+*	192.168.4.4:50 <-- 168.95.4.4:80 <--TXQ3---- 192.168.2.254:2004 <-- 168.95.4.4:80
-+*
-+*
-+*
-+*----------------------------------------------------------------------*/
-+#ifdef SL351x_NAT_TEST_BY_SMARTBITS
-+#define 	NAT_IPIV(a,b,c,d)			((a<<24)+(b<<16)+(c<<8)+d)
-+#define     NAT_TEST_CLIENT_IP 			NAT_IPIV(192,168,1,1)
-+#define     NAT_TEST_SERVER_IP 			NAT_IPIV(168,95,1,1)
-+#define		NAT_TEST_LAN_IP				NAT_IPIV(192,168,1,254)
-+#define		NAT_TEST_WAN_IP				NAT_IPIV(192,168,2,254)
-+#define     NAT_TEST_MAP_PORT_BASE		2001
-+#define     NAT_TEST_SPORT				50
-+#define     NAT_TEST_DPORT				80
-+#define     NAT_TEST_PROTOCOL			6
-+u8			nat_test_lan_target_da[6]={0x00,0x11,0x22,0x33,0x44,0x55};
-+u8			nat_test_wan_target_da[6]={0x00,0xaa,0xbb,0xcc,0xdd,0xee};
-+u8			nat_test_lan_my_da[6]={0x00,0x11,0x11,0x11,0x11,0x11};
-+u8			nat_test_wan_my_da[6]={0x00,0x22,0x22,0x22,0x22,0x22};
-+static void nat_init_test_entry(void)
-+{
-+	int 				i, j ;
-+	NAT_HASH_ENTRY_T	*hash_entry;
-+	u32					sip, dip;
-+	u32					hash_data[HASH_MAX_DWORDS];
-+	NAT_CFG_T			*cfg;
-+	int					hash_index;
-+
-+	cfg = (NAT_CFG_T *)&nat_cfg;
-+	hash_entry = (NAT_HASH_ENTRY_T *)&hash_data;
-+	hash_entry->key.Ethertype 	= 0;
-+	hash_entry->key.rule_id 	= 0;
-+	hash_entry->key.ip_protocol = IPPROTO_TCP;
-+	hash_entry->key.reserved1 	= 0;
-+	hash_entry->key.reserved2 	= 0;
-+	// hash_entry->key.sip 		= NAT_TEST_CLIENT_IP;
-+	// hash_entry->key.dip 		= NAT_TEST_SERVER_IP;
-+	hash_entry->key.sport 		= htons(NAT_TEST_SPORT);
-+	hash_entry->key.dport 		= htons(NAT_TEST_DPORT);
-+	hash_entry->key.rule_id = cfg->tcp_udp_rule_id;
-+	hash_entry->action.dword = NAT_LAN2WAN_ACTIONS;
-+
-+	sip = NAT_TEST_CLIENT_IP;
-+	dip = NAT_TEST_SERVER_IP;
-+
-+	// Init TCP <------> TCP hash entries
-+	// LAN --> WAN
-+	// (1) TCP --> TCP
-+	// (2) TCP --> PPPoE + TCP
-+	// (3) TCP --> VLAN-B + PPPoE + TCP
-+	// (4) TCP + VLAN-A --> VLAN-B + PPPoE + TCP
-+	memcpy(hash_entry->param.da, nat_test_wan_target_da, 6);
-+	memcpy(hash_entry->param.sa, nat_test_wan_my_da, 6);
-+	hash_entry->key.port_id = cfg->lan_port;
-+	for (i=0; iaction.bits.dest_qid = i+2;
-+		}
-+		else
-+		{
-+			hash_entry->action.bits.dest_qid = i;
-+		}
-+		hash_entry->action.bits.dest_qid += (cfg->wan_port==0) ? TOE_GMAC0_HW_TXQ0_QID : TOE_GMAC1_HW_TXQ0_QID;
-+		hash_entry->param.Sport = NAT_TEST_MAP_PORT_BASE+i;
-+		hash_entry->param.Dport = NAT_TEST_DPORT;
-+		for (j=0; j<4; j++)
-+		{
-+			hash_entry->key.sip = sip + i + j*0x100;
-+			hash_entry->key.dip = dip + i + j*0x100;
-+			hash_entry->param.Dip = hash_entry->key.dip;
-+			hash_entry->param.Sip = NAT_TEST_WAN_IP;
-+			switch (j)
-+			{
-+			case 0:
-+				hash_entry->action.bits.pppoe = 0;
-+				hash_entry->param.pppoe = 0;
-+				hash_entry->action.bits.vlan = 0;
-+				hash_entry->param.vlan = 0;
-+				break;
-+			case 1:
-+				hash_entry->action.bits.pppoe = 1;
-+				hash_entry->param.pppoe = i+1;
-+				hash_entry->action.bits.vlan = 0;
-+				hash_entry->param.vlan = 0;
-+				break;
-+			case 2:
-+				hash_entry->action.bits.pppoe = 1;
-+				hash_entry->param.pppoe = i+1;
-+				hash_entry->action.bits.vlan = 1;
-+				hash_entry->param.vlan = i+10;
-+				break;
-+			case 3:
-+				hash_entry->action.bits.pppoe = 1;
-+				hash_entry->param.pppoe = i+1;
-+				hash_entry->action.bits.vlan = 1;
-+				hash_entry->param.vlan = i+10;
-+				break;
-+			}
-+			hash_entry->tmo.counter = hash_entry->tmo.interval = 0x7fff;
-+			hash_index = nat_build_keys(&hash_entry->key);
-+			nat_write_hash_entry(hash_index, hash_entry);
-+			hash_nat_enable_owner(hash_index);
-+			hash_validate_entry(hash_index); // Must last one, else HW Tx fast than SW
-+		}
-+	}
-+
-+
-+	// WAN --> LAN
-+	hash_entry->key.port_id 	= cfg->wan_port;
-+	hash_entry->key.sport 		= htons(NAT_TEST_DPORT);
-+	hash_entry->key.dport 		= htons(NAT_TEST_DPORT);
-+	hash_entry->key.rule_id		= cfg->tcp_udp_rule_id;
-+	hash_entry->action.dword	= NAT_WAN2LAN_ACTIONS;
-+	hash_entry->key.sport		= htons(NAT_TEST_DPORT);
-+	memcpy(hash_entry->param.da, nat_test_lan_target_da, 6);
-+	memcpy(hash_entry->param.sa, nat_test_lan_my_da, 6);
-+	for (i=0; ikey.dport = htons(NAT_TEST_MAP_PORT_BASE + i);
-+		if (i < 2)
-+		{
-+			hash_entry->action.bits.dest_qid = i+2;
-+		}
-+		else
-+		{
-+			hash_entry->action.bits.dest_qid = i;
-+		}
-+		hash_entry->action.bits.dest_qid += (cfg->lan_port==0) ? TOE_GMAC0_HW_TXQ0_QID : TOE_GMAC1_HW_TXQ0_QID;
-+		hash_entry->param.Dport = NAT_TEST_SPORT;
-+		hash_entry->param.Sport = NAT_TEST_DPORT;
-+		hash_entry->param.da[5] = i;
-+		for (j=0; j<4; j++)
-+		{
-+			hash_entry->key.sip = (dip + i + j*0x100);
-+			hash_entry->key.dip = (NAT_TEST_WAN_IP);
-+			hash_entry->param.Sip = hash_entry->key.sip;
-+			hash_entry->param.Dip = sip + i + j*0x100;
-+			switch (j)
-+			{
-+			case 0:
-+				hash_entry->action.bits.pppoe = 0;
-+				hash_entry->param.pppoe = 0;
-+				hash_entry->action.bits.vlan = 0;
-+				hash_entry->param.vlan = 0;
-+				break;
-+			case 1:
-+				hash_entry->action.bits.pppoe = 2;
-+				hash_entry->param.pppoe = i+1;
-+				hash_entry->action.bits.vlan = 0;
-+				hash_entry->param.vlan = 0;
-+				break;
-+			case 2:
-+				hash_entry->action.bits.pppoe = 2;
-+				hash_entry->param.pppoe = i+1;
-+				hash_entry->action.bits.vlan = 2;
-+				hash_entry->param.vlan = i+5;
-+				break;
-+			case 3:
-+				hash_entry->action.bits.pppoe = 1;
-+				hash_entry->param.pppoe = i+1;
-+				hash_entry->action.bits.vlan = 1;
-+				hash_entry->param.vlan = i+5;
-+				break;
-+			}
-+			hash_entry->tmo.counter = hash_entry->tmo.interval = 0x7fff;
-+			hash_index = nat_build_keys(&hash_entry->key);
-+			nat_write_hash_entry(hash_index, hash_entry);
-+			hash_nat_enable_owner(hash_index);
-+			hash_validate_entry(hash_index); // Must last one, else HW Tx fast than SW
-+		}
-+	}
-+}
-+#endif	// SL351x_NAT_TEST_BY_SMARTBITS
-+
-+#endif // CONFIG_SL351x_NAT
-+
---- /dev/null
-+++ b/drivers/net/sl351x_proc.c
-@@ -0,0 +1,578 @@
-+/****************************************************************************
-+* Copyright 2006 Storlink Corp.  All rights reserved.
-+*----------------------------------------------------------------------------
-+* Name			: sl351x_proc.c
-+* Description	:
-+*		Handle Proc Routines for Storlink SL351x Platform
-+*
-+* History
-+*
-+*	Date		Writer		Description
-+*----------------------------------------------------------------------------
-+*	04/13/2006	Gary Chen	Create and implement
-+*
-+*
-+****************************************************************************/
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#ifdef CONFIG_NETFILTER
-+// #include 
-+#endif
-+#include 
-+#include 
-+#include 
-+#ifdef CONFIG_SYSCTL
-+#include 
-+#endif
-+
-+#define	 MIDWAY
-+#define	 SL_LEPUS
-+
-+// #define PROC_DEBUG_MSG	1
-+
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+
-+#ifdef CONFIG_PROC_FS
-+/*----------------------------------------------------------------------
-+* Definition
-+*----------------------------------------------------------------------*/
-+#define	proc_printf					printk
-+#define SL351x_GMAC_PROC_NAME		"sl351x_gmac"
-+#define SL351x_NAT_PROC_NAME		"sl351x_nat"
-+#define SL351x_TOE_PROC_NAME		"sl351x_toe"
-+
-+/*----------------------------------------------------------------------
-+* Function Definition
-+*----------------------------------------------------------------------*/
-+#ifdef CONFIG_SL351x_NAT
-+static int nat_ct_open(struct inode *inode, struct file *file);
-+static void *nat_ct_seq_start(struct seq_file *s, loff_t *pos);
-+static void nat_ct_seq_stop(struct seq_file *s, void *v);
-+static void *nat_ct_seq_next(struct seq_file *s, void *v, loff_t *pos);
-+static int nat_ct_seq_show(struct seq_file *s, void *v);
-+#endif
-+
-+#ifdef CONFIG_SL351x_RXTOE
-+static int toe_ct_open(struct inode *inode, struct file *file);
-+static void *toe_ct_seq_start(struct seq_file *s, loff_t *pos);
-+static void toe_ct_seq_stop(struct seq_file *s, void *v);
-+static void *toe_ct_seq_next(struct seq_file *s, void *v, loff_t *pos);
-+static int toe_ct_seq_show(struct seq_file *s, void *v);
-+extern int sl351x_get_toe_conn_flag(int index);
-+extern struct toe_conn * sl351x_get_toe_conn_info(int index);
-+#endif
-+
-+static int gmac_ct_open(struct inode *inode, struct file *file);
-+static void *gmac_ct_seq_start(struct seq_file *s, loff_t *pos);
-+static void gmac_ct_seq_stop(struct seq_file *s, void *v);
-+static void *gmac_ct_seq_next(struct seq_file *s, void *v, loff_t *pos);
-+static int gmac_ct_seq_show(struct seq_file *s, void *v);
-+
-+
-+/*----------------------------------------------------------------------
-+* Data
-+*----------------------------------------------------------------------*/
-+#ifdef CONFIG_SYSCTL
-+// static struct ctl_table_header *nat_ct_sysctl_header;
-+#endif
-+
-+#ifdef CONFIG_SL351x_NAT
-+static struct seq_operations nat_ct_seq_ops = {
-+	.start = nat_ct_seq_start,
-+	.next  = nat_ct_seq_next,
-+	.stop  = nat_ct_seq_stop,
-+	.show  = nat_ct_seq_show
-+};
-+
-+static struct file_operations nat_file_ops= {
-+	.owner   = THIS_MODULE,
-+	.open    = nat_ct_open,
-+	.read    = seq_read,
-+	.llseek  = seq_lseek,
-+	.release = seq_release
-+};
-+#endif // CONFIG_SL351x_NAT
-+
-+#ifdef CONFIG_SL351x_RXTOE
-+static struct seq_operations toe_ct_seq_ops = {
-+	.start = toe_ct_seq_start,
-+	.next  = toe_ct_seq_next,
-+	.stop  = toe_ct_seq_stop,
-+	.show  = toe_ct_seq_show
-+};
-+
-+static struct file_operations toe_file_ops= {
-+	.owner   = THIS_MODULE,
-+	.open    = toe_ct_open,
-+	.read    = seq_read,
-+	.llseek  = seq_lseek,
-+	.release = seq_release
-+};
-+#endif
-+
-+static struct seq_operations gmac_ct_seq_ops = {
-+	.start = gmac_ct_seq_start,
-+	.next  = gmac_ct_seq_next,
-+	.stop  = gmac_ct_seq_stop,
-+	.show  = gmac_ct_seq_show
-+};
-+
-+static struct file_operations gmac_file_ops= {
-+	.owner   = THIS_MODULE,
-+	.open    = gmac_ct_open,
-+	.read    = seq_read,
-+	.llseek  = seq_lseek,
-+	.release = seq_release
-+};
-+
-+#ifdef SL351x_GMAC_WORKAROUND
-+extern u32 gmac_workaround_cnt[4];
-+extern u32 gmac_short_frame_workaround_cnt[2];
-+#ifdef CONFIG_SL351x_NAT
-+	extern u32 sl351x_nat_workaround_cnt;
-+#endif
-+#endif
-+/*----------------------------------------------------------------------
-+* nat_ct_open
-+*----------------------------------------------------------------------*/
-+#ifdef CONFIG_SL351x_NAT
-+static int nat_ct_open(struct inode *inode, struct file *file)
-+{
-+	return seq_open(file, &nat_ct_seq_ops);
-+}
-+#endif // CONFIG_SL351x_NAT
-+/*----------------------------------------------------------------------
-+* nat_ct_seq_start
-+* find the first
-+*----------------------------------------------------------------------*/
-+#ifdef CONFIG_SL351x_NAT
-+static void *nat_ct_seq_start(struct seq_file *s, loff_t *pos)
-+{
-+	int i;
-+
-+	// proc_printf("%s: *pos=%d\n", __func__, (int)*pos);
-+	for (i=*pos; iHASH_TOTAL_ENTRIES)
-+		return -ENOSPC;
-+
-+	idx--;
-+	nat_entry = (NAT_HASH_ENTRY_T *)&hash_tables[idx];
-+	gre_entry = (GRE_HASH_ENTRY_T *)nat_entry;
-+	if (nat_entry->key.ip_protocol == IPPROTO_GRE)
-+	{
-+		if (seq_printf(s, "%4d: KEY MAC-%d [%d] %u.%u.%u.%u [%u]-->%u.%u.%u.%u\n",
-+					idx, gre_entry->key.port_id, gre_entry->key.ip_protocol,
-+					HIPQUAD(gre_entry->key.sip), ntohs(gre_entry->key.call_id),
-+					HIPQUAD(gre_entry->key.dip)))
-+			return -ENOSPC;
-+		if (seq_printf(s, "      PARAMETER: %u.%u.%u.%u -->%u.%u.%u.%u [%u] Timeout:%ds\n",
-+					HIPQUAD(gre_entry->param.Sip),
-+					HIPQUAD(gre_entry->param.Dip), gre_entry->param.Dport,
-+					gre_entry->tmo.counter))
-+			return -ENOSPC;
-+	}
-+	else
-+	{
-+		if (seq_printf(s, "%4d: KEY MAC-%d [%d] %u.%u.%u.%u [%u]-->%u.%u.%u.%u [%u]\n",
-+					idx, nat_entry->key.port_id, nat_entry->key.ip_protocol,
-+					HIPQUAD(nat_entry->key.sip), ntohs(nat_entry->key.sport),
-+					HIPQUAD(nat_entry->key.dip), ntohs(nat_entry->key.dport)))
-+			return -ENOSPC;
-+		if (seq_printf(s, "      PARAMETER: %u.%u.%u.%u [%u]-->%u.%u.%u.%u [%u] Timeout:%ds\n",
-+					HIPQUAD(nat_entry->param.Sip), nat_entry->param.Sport,
-+					HIPQUAD(nat_entry->param.Dip), nat_entry->param.Dport,
-+					nat_entry->tmo.counter))
-+			return -ENOSPC;
-+	}
-+	return 0;
-+}
-+#endif // CONFIG_SL351x_NAT
-+
-+/*----------------------------------------------------------------------
-+* toe_ct_open
-+*----------------------------------------------------------------------*/
-+#ifdef CONFIG_SL351x_RXTOE
-+static int toe_ct_open(struct inode *inode, struct file *file)
-+{
-+	return seq_open(file, &toe_ct_seq_ops);
-+}
-+#endif
-+/*----------------------------------------------------------------------
-+* toe_ct_seq_start
-+* find the first
-+*----------------------------------------------------------------------*/
-+#ifdef CONFIG_SL351x_RXTOE
-+static void *toe_ct_seq_start(struct seq_file *s, loff_t *pos)
-+{
-+	int i;
-+
-+	// proc_printf("%s: *pos=%d\n", __func__, (int)*pos);
-+	for (i=*pos; iTOE_TOE_QUEUE_NUM)
-+		return -ENOSPC;
-+
-+	idx--;
-+	toe_entry = (struct toe_conn *)sl351x_get_toe_conn_info(idx);
-+	if (!toe_entry)
-+		return -ENOSPC;
-+
-+	if (seq_printf(s, "%4d: Qid %d MAC-%d TCP %u.%u.%u.%u [%u]-->%u.%u.%u.%u [%u]\n",
-+				idx, toe_entry->qid, toe_entry->gmac->port_id,
-+				NIPQUAD(toe_entry->saddr[0]), ntohs(toe_entry->source),
-+				NIPQUAD(toe_entry->daddr[0]), ntohs(toe_entry->dest)))
-+			return -ENOSPC;
-+	return 0;
-+}
-+#endif
-+/*----------------------------------------------------------------------
-+* gmac_ct_open
-+*----------------------------------------------------------------------*/
-+static int gmac_ct_open(struct inode *inode, struct file *file)
-+{
-+	return seq_open(file, &gmac_ct_seq_ops);
-+}
-+
-+/*----------------------------------------------------------------------
-+* gmac_ct_seq_start
-+* find the first
-+*----------------------------------------------------------------------*/
-+static void *gmac_ct_seq_start(struct seq_file *s, loff_t *pos)
-+{
-+	int i;
-+	i = (int)*pos + 1;;
-+
-+	if (i > 9)
-+		return NULL;
-+	else
-+		return (void *)i;
-+}
-+
-+/*----------------------------------------------------------------------
-+* gmac_ct_seq_stop
-+*----------------------------------------------------------------------*/
-+static void gmac_ct_seq_stop(struct seq_file *s, void *v)
-+{
-+}
-+
-+/*----------------------------------------------------------------------
-+* gmac_ct_seq_next
-+*----------------------------------------------------------------------*/
-+static void *gmac_ct_seq_next(struct seq_file *s, void *v, loff_t *pos)
-+{
-+	int i;
-+
-+	// proc_printf("%s: *pos=%d\n", __func__, (int)*pos);
-+
-+	(*pos)++;
-+	i = (int)*pos + 1;;
-+
-+	if (i > 9)
-+		return NULL;
-+	else
-+		return (void *)i;
-+}
-+
-+/*----------------------------------------------------------------------
-+* seq_dm_long
-+*----------------------------------------------------------------------*/
-+static void seq_dm_long(struct seq_file *s, u32 location, int length)
-+{
-+	u32		*start_p, *curr_p, *end_p;
-+	u32		*datap, data;
-+	int		i;
-+
-+	//if (length > 1024)
-+	//	length = 1024;
-+
-+	start_p = (u32 *)location;
-+	end_p = (u32 *)location + length;
-+	curr_p = (u32 *)((u32)location & 0xfffffff0);
-+	datap = (u32 *)location;
-+	while (curr_p < end_p)
-+	{
-+		cond_resched();
-+		seq_printf(s, "0x%08x: ",(u32)curr_p & 0xfffffff0);
-+		for (i=0; i<4; i++)
-+		{
-+			if (curr_p < start_p || curr_p >= end_p)
-+               seq_printf(s, "         ");
-+			else
-+			{
-+				data = *datap;
-+				seq_printf(s, "%08X ", data);
-+			}
-+			if (i==1)
-+              seq_printf(s, "- ");
-+
-+			curr_p++;
-+			datap++;
-+		}
-+        seq_printf(s, "\n");
-+	}
-+}
-+
-+/*----------------------------------------------------------------------
-+* gmac_ct_seq_show
-+*----------------------------------------------------------------------*/
-+static int gmac_ct_seq_show(struct seq_file *s, void *v)
-+{
-+	switch ((int)v)
-+	{
-+		case 1:
-+			seq_printf(s, "\nGMAC Global Registers\n");
-+			seq_dm_long(s, TOE_GLOBAL_BASE, 32);
-+			break;
-+		case 2:
-+			seq_printf(s, "\nGMAC Non-TOE Queue Header\n");
-+			seq_dm_long(s, TOE_NONTOE_QUE_HDR_BASE, 12);
-+			break;
-+		case 3:
-+			seq_printf(s, "\nGMAC TOE Queue Header\n");
-+			seq_dm_long(s, TOE_TOE_QUE_HDR_BASE, 12);
-+			break;
-+		case 4:
-+			seq_printf(s, "\nGMAC-0 DMA Registers\n");
-+			seq_dm_long(s, TOE_GMAC0_DMA_BASE, 52);
-+			break;
-+		case 5:
-+			seq_printf(s, "\nGMAC-0 Registers\n");
-+			seq_dm_long(s, TOE_GMAC0_BASE, 32);
-+			break;
-+		case 6:
-+			seq_printf(s, "\nGMAC-1 DMA Registers\n");
-+			seq_dm_long(s, TOE_GMAC1_DMA_BASE, 52);
-+			break;
-+		case 7:
-+			seq_printf(s, "\nGMAC-1 Registers\n");
-+			seq_dm_long(s, TOE_GMAC1_BASE, 32);
-+			break;
-+		case 8:
-+			seq_printf(s, "\nGLOBAL Registers\n");
-+			seq_dm_long(s, GMAC_GLOBAL_BASE_ADDR, 16);
-+			break;
-+		case 9:
-+#ifdef SL351x_GMAC_WORKAROUND
-+			seq_printf(s, "\nGMAC-0 Rx/Tx/Short Workaround: %u, %u, %u\n", gmac_workaround_cnt[0], gmac_workaround_cnt[1], gmac_short_frame_workaround_cnt[0]);
-+			seq_printf(s, "GMAC-1 Rx/Tx/Short Workaround: %u, %u, %u\n", gmac_workaround_cnt[2], gmac_workaround_cnt[3], gmac_short_frame_workaround_cnt[1]);
-+#ifdef CONFIG_SL351x_NAT
-+			seq_printf(s, "NAT Workaround: %u\n", sl351x_nat_workaround_cnt);
-+#endif
-+#endif
-+			break;
-+		default:
-+			return -ENOSPC;
-+	}
-+	return 0;
-+}
-+
-+/*----------------------------------------------------------------------
-+* init
-+*----------------------------------------------------------------------*/
-+static int __init init(void)
-+{
-+	struct proc_dir_entry *proc_gmac=NULL;
-+
-+#ifdef CONFIG_SL351x_NAT
-+	struct proc_dir_entry *proc_nat=NULL;
-+#endif
-+
-+#ifdef CONFIG_SL351x_RXTOE
-+	struct proc_dir_entry *proc_toe=NULL;
-+#endif
-+
-+#ifdef CONFIG_SYSCTL
-+	// nat_ct_sysctl_header = NULL;
-+#endif
-+	proc_gmac = proc_net_fops_create(SL351x_GMAC_PROC_NAME, 0440, &gmac_file_ops);
-+	if (!proc_gmac) goto init_bad;
-+
-+#ifdef CONFIG_SL351x_NAT
-+	proc_nat = proc_net_fops_create(SL351x_NAT_PROC_NAME, 0440, &nat_file_ops);
-+	if (!proc_nat) goto init_bad;
-+#endif // CONFIG_SL351x_NAT
-+
-+#ifdef CONFIG_SL351x_RXTOE
-+	proc_toe = proc_net_fops_create(SL351x_TOE_PROC_NAME, 0440, &toe_file_ops);
-+	if (!proc_toe) goto init_bad;
-+#endif
-+
-+#ifdef CONFIG_SYSCTL
-+	// nat_ct_sysctl_header = register_sysctl_table(nat_ct_net_table, 0);
-+	// if (!nat_ct_sysctl_header) goto init_bad;
-+#endif
-+
-+	return 0;
-+
-+init_bad:
-+	if (proc_gmac) proc_net_remove(SL351x_GMAC_PROC_NAME);
-+
-+#ifdef CONFIG_SL351x_NAT
-+	if (proc_nat) proc_net_remove(SL351x_NAT_PROC_NAME);
-+#endif
-+
-+#ifdef CONFIG_SL351x_RXTOE
-+	if (proc_toe) proc_net_remove(SL351x_NAT_PROC_NAME);
-+#endif
-+
-+#ifdef CONFIG_SYSCTL
-+	// if (nat_ct_sysctl_header) unregister_sysctl_table(nat_ct_sysctl_header);
-+#endif
-+	proc_printf("SL351x NAT Proc: can't create proc or register sysctl.\n");
-+	return -ENOMEM;
-+}
-+
-+/*----------------------------------------------------------------------
-+* fini
-+*----------------------------------------------------------------------*/
-+static void __exit fini(void)
-+{
-+	proc_net_remove(SL351x_GMAC_PROC_NAME);
-+
-+#ifdef CONFIG_SL351x_NAT
-+	proc_net_remove(SL351x_NAT_PROC_NAME);
-+#endif
-+
-+#ifdef CONFIG_SL351x_RXTOE
-+	proc_net_remove(SL351x_TOE_PROC_NAME);
-+#endif
-+
-+#ifdef CONFIG_SYSCTL
-+	// unregister_sysctl_table(nat_ct_sysctl_header);
-+#endif
-+}
-+
-+/*----------------------------------------------------------------------
-+* module
-+*----------------------------------------------------------------------*/
-+module_init(init);
-+module_exit(fini);
-+
-+#endif	// CONFIG_PROC_FS
---- /dev/null
-+++ b/drivers/net/sl351x_toe.c
-@@ -0,0 +1,1083 @@
-+/**************************************************************************
-+* Copyright 2006 StorLink Semiconductors, Inc.  All rights reserved.
-+*--------------------------------------------------------------------------
-+* Name			: sl351x_toe.c
-+* Description	:
-+*		Provide TOE routines for SL351x
-+*
-+* History
-+*
-+*	Date		Writer		Description
-+*----------------------------------------------------------------------------
-+*				Xiaochong
-+*
-+****************************************************************************/
-+
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+
-+static int in_toe_isr;
-+static int toe_initialized=0;
-+
-+static struct toe_conn	toe_connections[TOE_TOE_QUEUE_NUM];
-+EXPORT_SYMBOL(toe_connections);
-+static __u32 toe_connection_bits[TOE_TOE_QUEUE_NUM/32] __attribute__ ((aligned(16)));
-+struct sk_buff* gen_pure_ack(struct toe_conn* connection, TOE_QHDR_T* toe_qhdr, INTR_QHDR_T *intr_curr_desc);
-+
-+extern struct storlink_sysctl	storlink_ctl;
-+extern TOE_INFO_T toe_private_data;
-+extern spinlock_t gmac_fq_lock;
-+extern void mac_write_dma_reg(int mac, unsigned int offset, u32 data);
-+extern int mac_set_rule_reg(int mac, int rule, int enabled, u32 reg0, u32 reg1, u32 reg2);
-+extern int hash_add_toe_entry(HASH_ENTRY_T *entry);
-+extern void toe_gmac_fill_free_q(void);
-+
-+#define _DEBUG_SKB_		1
-+#ifdef _DEBUG_SKB_
-+/*---------------------------------------------------------------------------
-+ * _debug_skb
-+ *-------------------------------------------------------------------------*/
-+static inline void _debug_skb(struct sk_buff *skb, GMAC_RXDESC_T *toe_curr_desc, u32 data)
-+{
-+	if ((u32)skb < 0x1000)
-+	{
-+		printk("%s skb=%x\n", __func__, (u32)skb);
-+		while(1);
-+	}
-+	REG32(__va(toe_curr_desc->word2.buf_adr)-SKB_RESERVE_BYTES) = data;
-+}
-+#else
-+#define _debug_skb(x, y, z)
-+#endif
-+
-+/*---------------------------------------------------------------------------
-+ * get_connection_seq_num
-+ *-------------------------------------------------------------------------*/
-+u32 get_connection_seq_num(unsigned short qid)
-+{
-+	TOE_QHDR_T	*toe_qhdr;
-+
-+	toe_qhdr = (TOE_QHDR_T*)TOE_TOE_QUE_HDR_BASE;
-+	toe_qhdr += qid;
-+	return (u32)toe_qhdr->word3.seq_num;
-+}
-+EXPORT_SYMBOL(get_connection_seq_num);
-+
-+/*---------------------------------------------------------------------------
-+ * get_connection_ack_num
-+ *-------------------------------------------------------------------------*/
-+u32 get_connection_ack_num(unsigned short qid)
-+{
-+	TOE_QHDR_T	*toe_qhdr;
-+
-+	toe_qhdr = (TOE_QHDR_T*)TOE_TOE_QUE_HDR_BASE;
-+	toe_qhdr += qid;
-+	return (u32)toe_qhdr->word4.ack_num;
-+}
-+EXPORT_SYMBOL(get_connection_ack_num);
-+
-+/*---------------------------------------------------------------------------
-+ * dump_toe_qhdr
-+ *-------------------------------------------------------------------------*/
-+void dump_toe_qhdr(TOE_QHDR_T *toe_qhdr)
-+{
-+	printk("TOE w1 %x, w2 %x, w3 %x\n", toe_qhdr->word1.bits32,
-+		toe_qhdr->word2.bits32, toe_qhdr->word3.bits32);
-+	printk("w4 %x, w5 %x, w6 %x\n", toe_qhdr->word4.bits32,
-+		toe_qhdr->word5.bits32, toe_qhdr->word6.bits32);
-+}
-+
-+/*---------------------------------------------------------------------------
-+ * dump_intrq_desc
-+ *-------------------------------------------------------------------------*/
-+void dump_intrq_desc(INTR_QHDR_T *intr_curr_desc)
-+{
-+	printk("INTR w0 %x, w1 %x, seq %x\n", intr_curr_desc->word0.bits32,
-+		intr_curr_desc->word1.bits32, intr_curr_desc->word2.bits32);
-+	printk("ack %x, w4 %x\n", intr_curr_desc->word3.bits32,
-+		intr_curr_desc->word4.bits32);
-+}
-+
-+/*---------------------------------------------------------------------------
-+ * This routine will initialize a TOE matching rule
-+ * called by SL351x GMAC driver.
-+ *-------------------------------------------------------------------------*/
-+void sl351x_toe_init(void)
-+{
-+	GMAC_MRxCR0_T	mrxcr0;
-+	GMAC_MRxCR1_T	mrxcr1;
-+	GMAC_MRxCR2_T	mrxcr2;
-+	int	rule, rc;
-+
-+	if (toe_initialized)
-+		return;
-+
-+	toe_initialized = 1;
-+
-+#ifndef CONFIG_SL351x_NAT
-+	mrxcr0.bits32 = 0;
-+	mrxcr1.bits32 = 0;
-+	mrxcr2.bits32 = 0;
-+	mrxcr0.bits.l3 = 1;
-+	mrxcr0.bits.l4 = 1;
-+	mrxcr1.bits.sip = 1;
-+	mrxcr1.bits.dip = 1;
-+	mrxcr1.bits.l4_byte0_15 = 0x0f;
-+	mrxcr0.bits.sprx = 1;
-+	rule = 0;
-+	rc = mac_set_rule_reg(0, rule, 1, mrxcr0.bits32, mrxcr1.bits32,
-+						mrxcr2.bits32);
-+	if (rc<0) {
-+		printk("%s::Set MAC 0 rule fail!\n", __func__);
-+	}
-+	rc = mac_set_rule_reg(1, rule, 1, mrxcr0.bits32, mrxcr1.bits32,
-+	     					mrxcr2.bits32);
-+	if (rc<0) {
-+		printk("%s::Set MAC 1 rule fail!\n", __func__);
-+	}
-+#endif // CONFIG_SL351x_NAT
-+}
-+
-+/*---------------------------------------------------------------------------
-+ * dump_intrq_desc
-+ * assign an interrupt queue number to a give tcp queue
-+ *-------------------------------------------------------------------------*/
-+int get_interrupt_queue_id(int tcp_qid)
-+{
-+	return (int)(tcp_qid & 0x0003);
-+}
-+
-+/*---------------------------------------------------------------------------
-+ * reset_connection_index
-+ * reset the connection bit by given index
-+ *-------------------------------------------------------------------------*/
-+void reset_connection_index(__u8 index)
-+{
-+	__u32 mask = ~(0xffffffff & (1<< (index&0x1f)));
-+	toe_connection_bits[index>>5] = toe_connection_bits[index>>5] & mask;
-+}
-+
-+/*---------------------------------------------------------------------------
-+ * update_timer
-+ *-------------------------------------------------------------------------*/
-+void update_timer(struct toe_conn* connection)
-+{
-+//	if (time_before(jiffies, connection->last_rx_jiffies+3))
-+//	if ((jiffies + 0xffffffff - connection->last_rx_jiffies) & 0x3)
-+//	if (connection->last_rx_jiffies > jiffies)
-+//		printk("%s::jif %g, last_rx_jif %g\n", __func__, jiffies, connection->last_rx_jiffies);
-+/*	if ((long)(jiffies + 2)< 3) { // overflow...
-+		printk("%s::jiffies %x\n", __func__, jiffies);
-+	} */
-+//	if ((long)(jiffies - connection->last_rx_jiffies)< 2)
-+//		return;
-+	connection->last_rx_jiffies = jiffies;
-+	// gary chen mod_timer(&connection->rx_timer, jiffies+2);
-+	connection->rx_timer.expires = jiffies + 2;
-+	add_timer(&connection->rx_timer);
-+//	printk("%s::nt %x, lj %x\n", __func__, (jiffies+2), connection->last_rx_jiffies);
-+}
-+
-+/*---------------------------------------------------------------------------
-+ * gen_pure_ack
-+ *-------------------------------------------------------------------------*/
-+struct sk_buff* gen_pure_ack(struct toe_conn* connection, TOE_QHDR_T* toe_qhdr,
-+INTR_QHDR_T *intr_curr_desc)
-+{
-+	struct sk_buff	*skb;
-+	struct iphdr	*ip_hdr;
-+	struct tcphdr	*tcp_hdr;
-+	struct ethhdr	*eth_hdr;
-+
-+	if ((skb= dev_alloc_skb(RX_BUF_SIZE))==NULL) {
-+		printk("%s::alloc pure ack fail!\n", __func__);
-+		return NULL;
-+	}
-+	skb_reserve(skb, RX_INSERT_BYTES);
-+	memset(skb->data, 0, 60);
-+
-+	eth_hdr = (struct ethhdr*)&(skb->data[0]);
-+	memcpy(eth_hdr, &connection->l2_hdr, sizeof(struct ethhdr));
-+
-+	ip_hdr = (struct iphdr*)&(skb->data[14]);
-+	ip_hdr->version = connection->ip_ver;
-+	ip_hdr->ihl = 20>>2;
-+	ip_hdr->tot_len = ntohs(40);
-+	ip_hdr->frag_off = htons(IP_DF);
-+	ip_hdr->ttl = 128;
-+	ip_hdr->protocol = 0x06;
-+	ip_hdr->saddr = connection->saddr[0];
-+	ip_hdr->daddr = connection->daddr[0];
-+//	printk("%s ip sa %x, da %x\n",
-+//		__func__, ntohl(ip_hdr->saddr), ntohl(ip_hdr->daddr));
-+
-+	tcp_hdr = (struct tcphdr*)&(skb->data[34]);
-+	tcp_hdr->source = connection->source;
-+	tcp_hdr->dest = connection->dest;
-+	if (intr_curr_desc) {
-+		tcp_hdr->seq = htonl(intr_curr_desc->word2.seq_num);
-+		tcp_hdr->ack_seq = htonl(intr_curr_desc->word3.ack_num);
-+		tcp_hdr->window = htons(intr_curr_desc->word0.bits.win_size);
-+	} else {
-+		tcp_hdr->seq = htonl(toe_qhdr->word3.seq_num);
-+		tcp_hdr->ack_seq = htonl(toe_qhdr->word4.ack_num);
-+		tcp_hdr->window = htons(toe_qhdr->word6.bits.WinSize);
-+	}
-+	tcp_hdr->ack = 1;
-+	tcp_hdr->doff = 20 >> 2;
-+#if 0
-+	if (!intr_curr_desc) {
-+		unsigned char byte;
-+		for (i=0; i<20; i++) {
-+			byte = skb->data[34+i];
-+			printk("%x ", byte);
-+		}
-+		printk("\n");
-+	}
-+#endif
-+	TCP_SKB_CB(skb)->connection = connection;
-+	return skb;
-+}
-+
-+/*---------------------------------------------------------------------------
-+ * connection_rx_timer
-+ *-------------------------------------------------------------------------*/
-+void connection_rx_timer(unsigned long *data)
-+{
-+	struct toe_conn	*connection = (struct toe_conn*)data;
-+	unsigned int	tcp_qid, toeq_wptr;
-+	unsigned int	pkt_size, desc_count;
-+	struct sk_buff	*skb;
-+	GMAC_RXDESC_T	*toe_curr_desc;
-+	TOE_QHDR_T	*toe_qhdr;
-+	struct net_device	*dev;
-+	unsigned long	conn_flags;
-+	DMA_RWPTR_T		toeq_rwptr;
-+	unsigned short	timeout_descs;
-+
-+	if (in_toe_isr)
-+		printk("%s::in_toe_isr=%d!\n", __func__, in_toe_isr);
-+
-+	if (connection) {
-+		/* should we disable gmac interrupt first? */
-+		if (!connection->gmac)
-+			printk("%s::conn gmac %x!\n", __func__, (u32)connection->gmac);
-+		local_irq_save(conn_flags);
-+		if (!spin_trylock(&connection->conn_lock)) {
-+			local_irq_restore(conn_flags);
-+			// timer should be updated by the toeq isr. So no need to update here.
-+			printk("%s::conn_lock is held by ISR!\n", __func__);
-+			return;
-+		}
-+		disable_irq(connection->gmac->irq);
-+
-+		/* disable hash entry and get toeq desc. */
-+		hash_set_valid_flag(connection->hash_entry_index, 0);
-+		do{} while(0);	/* wait until HW finish */
-+
-+		dev = connection->dev;
-+		if (!dev)
-+			printk("%s::conn dev NULL!\n", __func__);
-+		tcp_qid = connection->qid;
-+		toe_qhdr = (TOE_QHDR_T *)(TOE_TOE_QUE_HDR_BASE +
-+		              tcp_qid * sizeof(TOE_QHDR_T));
-+		toeq_rwptr.bits32 = readl(&toe_qhdr->word1);
-+		toeq_wptr = toe_qhdr->word1.bits.wptr;
-+		timeout_descs = toeq_wptr - toeq_rwptr.bits.rptr;
-+
-+		if (toeq_rwptr.bits.rptr == toeq_wptr) {
-+			if (toe_qhdr->word5.bits32) {
-+				// shall we check toe_qhdr->word2.bits?
-+				skb = gen_pure_ack(connection, toe_qhdr, (INTR_QHDR_T *)NULL);
-+				skb_put(skb, 54);
-+				skb->dev = connection->dev;
-+				skb->ip_summed = CHECKSUM_UNNECESSARY;
-+				skb->protocol = eth_type_trans(skb, connection->dev);
-+				netif_rx(skb);
-+				connection->dev->last_rx = jiffies;
-+			}
-+		} else {
-+			while (toeq_rwptr.bits.rptr != toeq_rwptr.bits.wptr) {
-+				/* we just simply send those packets to tcp? */
-+				toe_curr_desc = (GMAC_RXDESC_T*)(toe_private_data.toe_desc_base[tcp_qid]
-+					+ toeq_rwptr.bits.rptr * sizeof(GMAC_RXDESC_T));
-+				connection->curr_desc = toe_curr_desc;
-+				if (toe_curr_desc->word3.bits.ctrl_flag) {
-+					printk("%s::ctrl flag! %x, conn rptr %d, to %d, jif %x, conn_jif %x\n",
-+						__func__, toe_curr_desc->word3.bits32,
-+						connection->toeq_rwptr.bits.rptr, timeout_descs,
-+						(u32)jiffies, (u32)connection->last_rx_jiffies);
-+				}
-+				desc_count = toe_curr_desc->word0.bits.desc_count;
-+				pkt_size = toe_curr_desc->word1.bits.byte_count;
-+				consistent_sync((void*)__va(toe_curr_desc->word2.buf_adr), pkt_size,
-+					PCI_DMA_FROMDEVICE);
-+				skb = (struct sk_buff*)(REG32(__va(toe_curr_desc->word2.buf_adr)-
-+					SKB_RESERVE_BYTES));
-+				_debug_skb(skb, (GMAC_RXDESC_T *)toe_curr_desc, 0x02);
-+				connection->curr_rx_skb = skb;
-+				skb_reserve(skb, RX_INSERT_BYTES);
-+				skb_put(skb, pkt_size);
-+				skb->dev = dev;
-+				skb->protocol = eth_type_trans(skb, dev);
-+				{
-+					struct iphdr* ip_hdr = (struct iphdr*)&(skb->data[0]);
-+					if (toe_curr_desc->word3.bits.ctrl_flag)
-+						printk("%s::ip id %x\n", __func__, ntohs(ip_hdr->id));
-+				}
-+				skb->ip_summed = CHECKSUM_UNNECESSARY;
-+
-+				netif_rx(skb);
-+				dev->last_rx = jiffies;
-+#if 0
-+				if ((skb = dev_alloc_skb(RX_BUF_SIZE)) == NULL) {
-+					printk("%s::alloc buf fail!\n", __func__);
-+				}
-+				*(unsigned int*)(skb->data) = (unsigned int)skb;
-+				connection->curr_rx_skb = skb;
-+				skb_reserve(skb, SKB_RESERVE_BYTES);
-+				spin_lock_irqsave(&connection->gmac->rx_mutex, flags);
-+				fq_rwptr.bits32 = readl(TOE_GLOBAL_BASE + GLOBAL_SWFQ_RWPTR_REG);
-+				if (toe_private_data.fq_rx_rwptr.bits.wptr != fq_rwptr.bits.wptr) {
-+					mac_stop_txdma((struct net_device*)connection->dev);
-+					spin_unlock_irqrestore(&connection->gmac->rx_mutex, flags);
-+					while(1);
-+				}
-+				fq_desc = (GMAC_RXDESC_T*)toe_private_data.swfq_desc_base + fq_rwptr.bits.wptr;
-+				fq_desc->word2.buf_adr = (unsigned int)__pa(skb->data);
-+				fq_rwptr.bits.wptr = RWPTR_ADVANCE_ONE(fq_rwptr.bits.wptr, TOE_SW_FREEQ_DESC_NUM);
-+				SET_WPTR(TOE_GLOBAL_BASE+GLOBAL_SWFQ_RWPTR_REG, fq_rwptr.bits.wptr);
-+				toe_private_data.fq_rx_rwptr.bits32 = fq_rwptr.bits32;
-+				spin_unlock_irqrestore(&connection->gmac->rx_mutex, flags);
-+#endif
-+//				spin_lock_irqsave(&connection->gmac->rx_mutex, flags);
-+				toeq_rwptr.bits.rptr = RWPTR_ADVANCE_ONE(toeq_rwptr.bits.rptr, TOE_TOE_DESC_NUM);
-+				SET_RPTR(&toe_qhdr->word1, toeq_rwptr.bits.rptr);
-+//				spin_unlock_irqrestore(&connection->gmac->rx_mutex, flags);
-+				connection->toeq_rwptr.bits32 = toeq_rwptr.bits32;
-+			}
-+			toeq_rwptr.bits32 = readl(&toe_qhdr->word1);
-+//			toe_gmac_fill_free_q();
-+		}
-+		connection->last_rx_jiffies = jiffies;
-+		if (connection->status != TCP_CONN_CLOSED)
-+			mod_timer(&connection->rx_timer, jiffies+2);
-+		if (connection->status != TCP_CONN_ESTABLISHED)
-+			printk("%s::conn status %x\n", __func__, connection->status);
-+		hash_set_valid_flag(connection->hash_entry_index, 1);
-+		enable_irq(connection->gmac->irq);
-+		// Gary Chen spin_unlock_irqrestore(&connection->conn_lock, conn_flags);
-+	}
-+}
-+
-+/*---------------------------------------------------------------------------
-+ * free_toeq_descs
-+ *-------------------------------------------------------------------------*/
-+void free_toeq_descs(int qid, TOE_INFO_T *toe)
-+{
-+	void	*desc_ptr;
-+
-+	desc_ptr = (void*)toe->toe_desc_base[qid];
-+	pci_free_consistent(NULL, TOE_TOE_DESC_NUM*sizeof(GMAC_RXDESC_T), desc_ptr,
-+	   (dma_addr_t)toe->toe_desc_base_dma[qid]);
-+	toe->toe_desc_base[qid] = 0;
-+}
-+
-+/*---------------------------------------------------------------------------
-+ * set_toeq_hdr
-+ *-------------------------------------------------------------------------*/
-+void set_toeq_hdr(struct toe_conn*	connection, TOE_INFO_T* toe, struct net_device *dev)
-+{
-+	volatile TOE_QHDR_T	*toe_qhdr;
-+	volatile unsigned int	toeq_wptr; // toeq_rptr
-+	volatile GMAC_RXDESC_T	*toe_curr_desc;
-+	struct sk_buff	*skb;
-+	unsigned int	pkt_size;
-+	DMA_RWPTR_T	toeq_rwptr;
-+
-+	if (connection->status == TCP_CONN_CLOSING) {
-+		connection->status = TCP_CONN_CLOSED;
-+		hash_set_valid_flag(connection->hash_entry_index, 0);
-+		// remove timer first.
-+		// del_timer_sync(&(connection->rx_timer));
-+		// check if any queued frames last time.
-+		toe_qhdr = (volatile TOE_QHDR_T*)TOE_TOE_QUE_HDR_BASE;
-+		toe_qhdr += connection->qid;
-+		toeq_rwptr.bits32 = readl(&toe_qhdr->word1);
-+
-+		//toeq_rptr = toe_qhdr->word1.bits.rptr;
-+		toeq_wptr = toe_qhdr->word1.bits.wptr;
-+		while (toeq_rwptr.bits.rptr != toeq_wptr) {
-+			printk("%s::pending frames in TOE Queue before closing!\n", __func__);
-+			toe_curr_desc = (GMAC_RXDESC_T*)(toe->toe_desc_base[connection->qid] +
-+				toe_qhdr->word1.bits.rptr*sizeof(GMAC_RXDESC_T));
-+			connection->curr_desc = (GMAC_RXDESC_T *)toe_curr_desc;
-+			pkt_size = toe_curr_desc->word1.bits.byte_count;
-+			consistent_sync((void*)__va(toe_curr_desc->word2.buf_adr), pkt_size,
-+				PCI_DMA_FROMDEVICE);
-+			skb = (struct sk_buff*)(REG32(__va(toe_curr_desc->word2.buf_adr) -
-+				SKB_RESERVE_BYTES));
-+			_debug_skb(skb, (GMAC_RXDESC_T *)toe_curr_desc, 0x03);
-+			connection->curr_rx_skb = skb;
-+			skb_reserve(skb, RX_INSERT_BYTES);
-+			skb_put(skb, pkt_size);
-+			skb->dev = connection->dev;
-+			skb->protocol = eth_type_trans(skb, connection->dev);
-+			skb->ip_summed = CHECKSUM_UNNECESSARY;
-+			netif_rx(skb);
-+			connection->dev->last_rx = jiffies;
-+
-+			toeq_rwptr.bits.rptr = RWPTR_ADVANCE_ONE(toeq_rwptr.bits.rptr, TOE_TOE_DESC_NUM);
-+			SET_RPTR(&toe_qhdr->word1, toeq_rwptr.bits.rptr);
-+		}
-+		free_toeq_descs(connection->qid, toe);
-+		// shall we re-fill free queue?
-+
-+		reset_connection_index(connection->qid);
-+		//memset(connection, 0, sizeof(struct toe_conn));
-+		printk(" del timer and close connection %x, qid %d\n", (u32)connection, connection->qid);
-+		return;
-+	}
-+	/* enable or setup toe queue header */
-+	if (connection->status == TCP_CONN_CONNECTING && storlink_ctl.rx_max_pktsize) {
-+		volatile TOE_QHDR_T	*qhdr;
-+		int iq_id;
-+		connection->status = TCP_CONN_ESTABLISHED;
-+		qhdr = (volatile TOE_QHDR_T*)((unsigned int)TOE_TOE_QUE_HDR_BASE +
-+		               connection->qid * sizeof(TOE_QHDR_T));
-+
-+		iq_id = get_interrupt_queue_id(connection->qid);
-+		connection->dev = dev;
-+		connection->gmac = dev->priv;
-+		connection->toeq_rwptr.bits32 = 0;
-+
-+//		qhdr->word6.bits.iq_num = iq_id;
-+		qhdr->word6.bits.MaxPktSize = (connection->max_pktsize)>>2; // in word.
-+		qhdr->word7.bits.AckThreshold = connection->ack_threshold;
-+		qhdr->word7.bits.SeqThreshold = connection->seq_threshold;
-+
-+		// init timer.
-+#if 1
-+		init_timer(&connection->rx_timer);
-+		connection->rx_timer.expires = jiffies + 5;
-+		connection->rx_timer.data = (unsigned long)connection;
-+		connection->rx_timer.function = (void *)&connection_rx_timer;
-+		add_timer(&connection->rx_timer);
-+		connection->last_rx_jiffies = jiffies;
-+		printk("init_timer %x\n", (u32)jiffies);
-+#endif
-+		hash_set_valid_flag(connection->hash_entry_index, 1);
-+		return;
-+	} else {
-+		printk("%s::conn status %x, rx_pktsize %d\n",
-+			__func__, connection->status, storlink_ctl.rx_max_pktsize);
-+	}
-+}
-+
-+/*---------------------------------------------------------------------------
-+ * get_connection_index
-+ * get_connection_index will find an available index for the connection,
-+ * when allocate a new connection is needed.
-+ * we find available Qid from AV bits and write to hash_table, so that when RxTOE
-+ * packet is received, sw_id from ToeQ descriptor is also the Qid of conneciton Q.
-+ *-------------------------------------------------------------------------*/
-+int get_connection_index(void)
-+{
-+	int i=0, j=0, index=-1;
-+	__u32	connection_bits;
-+
-+	for (i = 0; i< TOE_TOE_QUEUE_NUM/32; i++) {
-+		connection_bits = ~(toe_connection_bits[i]);
-+		if (connection_bits == 0)
-+			// all 32 bits are used.
-+			continue;
-+
-+		for (j=0; j<32; j++) {
-+			if (connection_bits & 0x01) {
-+				index = i*32 + j;
-+				return index;
-+			}
-+			connection_bits = connection_bits >> 1;
-+		}
-+	}
-+	return index;
-+}
-+
-+/*---------------------------------------------------------------------------
-+ * set_toe_connection
-+ *-------------------------------------------------------------------------*/
-+void set_toe_connection(int index, int val)
-+{
-+	if (val) {
-+		toe_connection_bits[index/32] |= (1<<(index%32));
-+	} else {
-+		toe_connection_bits[index/32] &= (~(1<<(index%32)));
-+	}
-+}
-+
-+/*---------------------------------------------------------------------------
-+ * sl351x_get_toe_conn_flag
-+ *-------------------------------------------------------------------------*/
-+int sl351x_get_toe_conn_flag(int index)
-+{
-+	if (index < TOE_TOE_QUEUE_NUM)
-+		return (toe_connection_bits[index/32] & (1 << (index %32)));
-+	else
-+		return 0;
-+}
-+
-+/*---------------------------------------------------------------------------
-+ * sl351x_get_toe_conn_info
-+ *-------------------------------------------------------------------------*/
-+struct toe_conn * sl351x_get_toe_conn_info(int index)
-+{
-+	if (index < TOE_TOE_QUEUE_NUM)
-+		return (struct toe_conn *)&toe_connections[index];
-+	else
-+		return NULL;
-+}
-+
-+/*---------------------------------------------------------------------------
-+ * create_sw_toe_connection
-+ *-------------------------------------------------------------------------*/
-+struct toe_conn* create_sw_toe_connection(int qid, int ip_ver, void* ip_hdr,
-+	struct tcphdr* tcp_hdr)
-+{
-+	struct toe_conn*	connection =  &(toe_connections[qid]);
-+
-+	connection->ip_ver = (__u8)ip_ver;
-+	connection->qid = (__u8)qid;
-+	connection->source = (__u16)tcp_hdr->source;
-+	connection->dest = (__u16)tcp_hdr->dest;
-+	if (ip_ver == 4) {
-+		struct iphdr* iph = (struct iphdr*) ip_hdr;
-+		connection->saddr[0] = (__u32)iph->saddr;
-+		connection->daddr[0] = (__u32)iph->daddr;
-+//		printk("%s::saddr %x, daddr %x\n", __func__,
-+//			ntohl(connection->saddr[0]), ntohl(connection->daddr[0]));
-+	} else if (ip_ver == 6) {
-+		struct ipv6hdr *iph = (struct ipv6hdr*)ip_hdr;
-+		int i=0;
-+		for (i=0; i<4; i++) {
-+			connection->saddr[i] = (__u32)iph->saddr.in6_u.u6_addr32[i];
-+			connection->daddr[i] = (__u32)iph->daddr.in6_u.u6_addr32[i];
-+		}
-+	}
-+	connection->status = TCP_CONN_CREATION;
-+	return connection;
-+}
-+
-+/*---------------------------------------------------------------------------
-+ * fill_toeq_buf
-+ *-------------------------------------------------------------------------*/
-+int fill_toeq_buf(int index, TOE_INFO_T* toe)
-+{
-+	volatile TOE_QHDR_T	*qhdr;
-+	//struct toe_conn* connection;
-+	GMAC_RXDESC_T	*desc_ptr;
-+
-+	if (!toe->toe_desc_base[index]) {
-+		// first time. init.
-+		desc_ptr = (GMAC_RXDESC_T*)(pci_alloc_consistent(NULL, TOE_TOE_DESC_NUM
-+		            *sizeof(GMAC_RXDESC_T), (dma_addr_t*)&toe->toe_desc_base_dma[index]));
-+
-+		toe->toe_desc_num = TOE_TOE_DESC_NUM;
-+		toe->toe_desc_base[index] = (unsigned int)desc_ptr;
-+	}
-+	qhdr = (volatile TOE_QHDR_T*)((unsigned int)TOE_TOE_QUE_HDR_BASE +
-+									index*sizeof(TOE_QHDR_T));
-+	//connection = (struct toe_conn*)&(toe_connections[index]);
-+
-+	qhdr->word0.base_size = ((unsigned int)toe->toe_desc_base_dma[index]&TOE_QHDR0_BASE_MASK)
-+					| TOE_TOE_DESC_POWER;
-+	qhdr->word1.bits32 = 0;
-+	qhdr->word2.bits32 = 0;
-+	qhdr->word3.bits32 = 0;
-+	qhdr->word4.bits32 = 0;
-+	qhdr->word5.bits32 = 0;
-+	return 1;
-+}
-+
-+/*---------------------------------------------------------------------------
-+ * create_toe_hash_entry_smb
-+ * add SMB header in hash entry.
-+ *-------------------------------------------------------------------------*/
-+int create_toe_hash_entry_smb(int ip_ver, void* ip_hdr, struct tcphdr* tcp_hdr,
-+	int sw_id)
-+{
-+	HASH_ENTRY_T	hash_entry, *entry;
-+	int	hash_entry_index;
-+	int i;
-+
-+	entry = (HASH_ENTRY_T*)&hash_entry;
-+	memset((void*)entry, 0, sizeof(HASH_ENTRY_T));
-+	entry->rule = 0;
-+
-+	/* enable fields of hash key */
-+	entry->key_present.ip_protocol = 1;
-+	entry->key_present.sip = 1;
-+	entry->key_present.dip = 1;
-+	entry->key_present.l4_bytes_0_3 = 1;	// src port and dest port
-+	entry->key_present.l7_bytes_0_3 = 0;	// do we need to enable NETBIOS? how?
-+	entry->key_present.l7_bytes_4_7 = 1;	// "SMB" header
-+
-+	/* hash key */
-+	entry->key.ip_protocol = IPPROTO_TCP;
-+	if (ip_ver == 4) {
-+		struct iphdr *iph = (struct iphdr*)ip_hdr;
-+		memcpy(entry->key.sip, &iph->saddr, 4);
-+		memcpy(entry->key.dip, &iph->daddr, 4);
-+	} else if (ip_ver == 6) {
-+		struct ipv6hdr *iph = (struct ipv6hdr*)ip_hdr;
-+		for (i=0; i<4; i++) {
-+			memcpy(&(entry->key.sip[i*4]), &(iph->saddr.in6_u.u6_addr32[i]), 4);
-+			memcpy(&(entry->key.dip[i*4]), &(iph->daddr.in6_u.u6_addr32[i]), 4);
-+		}
-+	}
-+	*(__u16*)&entry->key.l4_bytes[0] = tcp_hdr->source;
-+	*(__u16*)&entry->key.l4_bytes[2] = tcp_hdr->dest;
-+
-+	entry->key.l7_bytes[4] = 0xff;
-+	entry->key.l7_bytes[5] = 0x53;
-+	entry->key.l7_bytes[6] = 0x4d;
-+	entry->key.l7_bytes[7] = 0x42;
-+
-+	/* action of hash entry match */
-+	entry->action.sw_id = 1;
-+	entry->action.dest_qid = (__u8)TOE_TOE_QID(sw_id);
-+	entry->action.srce_qid = 0;
-+	hash_entry_index = hash_add_toe_entry(entry);
-+
-+	return hash_entry_index;
-+}
-+
-+// best performance of tcp streaming.
-+/*---------------------------------------------------------------------------
-+ * create_toe_hash_entry_smb
-+ * add SMB header in hash entry.
-+ *-------------------------------------------------------------------------*/
-+int create_toe_hash_entry_ftp(int ip_ver, void* ip_hdr, struct tcphdr* tcphdr)
-+{
-+	return 0;
-+}
-+
-+// is hash entry for nfs needed?
-+
-+/*
-+ * Create a TOE hash entry by given ip addresses and tcp port numbers.
-+ * hash entry index will be saved in sw connection.
-+ */
-+/*---------------------------------------------------------------------------
-+ * create_toe_hash_entry
-+ *-------------------------------------------------------------------------*/
-+int create_toe_hash_entry(int ip_ver, void* ip_hdr, struct tcphdr* tcp_hdr, int sw_id)
-+{
-+	HASH_ENTRY_T	hash_entry, *entry;
-+//	unsigned long	hash_key[HASH_MAX_DWORDS];
-+	int	hash_entry_index;
-+
-+	entry = (HASH_ENTRY_T*) &hash_entry;
-+	memset((void*)entry, 0, sizeof(HASH_ENTRY_T));
-+	entry->rule = 0;
-+	/* enable fields of hash key */
-+	entry->key_present.ip_protocol = 1;
-+	entry->key_present.sip = 1;
-+	entry->key_present.dip = 1;
-+	entry->key_present.l4_bytes_0_3 = 1;	// src port and dest port
-+
-+	/* hash key */
-+	entry->key.ip_protocol = IPPROTO_TCP;
-+	if (ip_ver == 4) {
-+		// key of ipv4
-+		struct iphdr* iph = (struct iphdr*)ip_hdr;
-+		memcpy(entry->key.sip, &iph->saddr, 4);
-+		memcpy(entry->key.dip, &iph->daddr, 4);
-+	} else if (ip_ver == 6) {
-+		// key of ipv6
-+		int i=0;
-+		struct ipv6hdr *iph = (struct ipv6hdr*)ip_hdr;
-+		for (i=0; i<4; i++) {
-+			memcpy(&(entry->key.sip[i*4]), &(iph->saddr.in6_u.u6_addr32[i]), 4);
-+			memcpy(&(entry->key.dip[i*4]), &(iph->daddr.in6_u.u6_addr32[i]), 4);
-+		}
-+	}
-+	*(__u16*)&entry->key.l4_bytes[0] = tcp_hdr->source;
-+	*(__u16*)&entry->key.l4_bytes[2] = tcp_hdr->dest;
-+	// is it necessary to write ip version to hash key?
-+
-+	/* action of hash entry match */
-+	entry->action.sw_id = 1;
-+	entry->action.dest_qid = (__u8)TOE_TOE_QID(sw_id);
-+	entry->action.srce_qid = 0;	// 0 for SW FreeQ. 1 for HW FreeQ.
-+	hash_entry_index = hash_add_toe_entry(entry);
-+//	printk("\n%s. sw_id %d, hash_entry index %x\n",
-+//		__func__, TOE_TOE_QID(sw_id), hash_entry_index);
-+	return hash_entry_index;
-+}
-+
-+/*---------------------------------------------------------------------------
-+ * init_toeq
-+ * 1. Reserve a TOE Queue id first, to get the sw toe_connection.
-+ * 2. Setup the hash entry with given iphdr and tcphdr, save hash entry index
-+ *    in sw toe_connection.
-+ * 3. Prepare sw toe_connection and allocate buffers.
-+ * 4. Validate hash entry.
-+ *-------------------------------------------------------------------------*/
-+struct toe_conn* init_toeq(int ipver, void* iph, struct tcphdr* tcp_hdr,
-+	TOE_INFO_T* toe, unsigned char* l2hdr)
-+{
-+//	printk("\t*** %s, ipver %d\n", __func__, ipver);
-+	int qid=-1;
-+	struct toe_conn* connection;
-+	int hash_entry_index;
-+	// int i=0;
-+	unsigned short	dest_port = ntohs(tcp_hdr->dest);
-+
-+	if (dest_port == 445) {
-+		printk("%s::SMB/CIFS connection\n", __func__);
-+	} else if (dest_port == 20) {
-+		printk("%s::ftp-data connection\n", __func__);
-+	} else if (dest_port == 2049) {
-+		printk("%s::nfs daemon connection\n", __func__);
-+	}
-+	qid = get_connection_index();
-+	if (qid<0)
-+		return 0;	// setup toeq failure
-+	set_toe_connection(qid, 1); // reserve this sw toeq.
-+
-+	//connection = (struct toe_conn*)&(toe_connections[qid]);
-+	hash_entry_index = create_toe_hash_entry(ipver, iph, tcp_hdr, qid);
-+	if (hash_entry_index <0) {
-+		printk("%s::release toe hash entry!\n", __func__);
-+		set_toe_connection(qid, 0); // release this sw toeq.
-+		return 0;
-+	}
-+	connection = create_sw_toe_connection(qid, ipver, iph, tcp_hdr);
-+	connection->hash_entry_index = (__u16) hash_entry_index;
-+
-+	fill_toeq_buf(qid, toe);
-+	memcpy(&connection->l2_hdr, l2hdr, sizeof(struct ethhdr));
-+	spin_lock_init(&connection->conn_lock);
-+
-+	return connection;
-+}
-+
-+#if 0
-+/*----------------------------------------------------------------------
-+*   toe_init_toe_queue
-+*   (1) Initialize the TOE Queue Header
-+*       Register: TOE_TOE_QUE_HDR_BASE (0x60003000)
-+*   (2) Initialize Descriptors of TOE Queues
-+*----------------------------------------------------------------------*/
-+void toe_init_toe_queue(TOE_INFO_T* toe)
-+{
-+}
-+EXPORT_SYMBOL(toe_init_toe_queue);
-+#endif
-+
-+/*---------------------------------------------------------------------------
-+ * dump_jumbo_skb
-+ *-------------------------------------------------------------------------*/
-+void dump_jumbo_skb(struct jumbo_frame *jumbo_skb)
-+{
-+	if (jumbo_skb->skb0) {
-+//		printk("%s. jumbo skb %x, len %d\n",
-+//			__func__, jumbo_skb->skb0->data, jumbo_skb->skb0->len);
-+		netif_rx(jumbo_skb->skb0);
-+	}
-+	jumbo_skb->skb0 = 0;
-+	jumbo_skb->tail = 0;
-+	jumbo_skb->iphdr0 = 0;
-+	jumbo_skb->tcphdr0 = 0;
-+}
-+
-+/* ---------------------------------------------------------------------
-+ * Append skb to skb0. skb0 is the jumbo frame that will be passed to
-+ * kernel tcp.
-+ * --------------------------------------------------------------------*/
-+void rx_append_skb(struct jumbo_frame *jumbo_skb, struct sk_buff* skb, int payload_len)
-+{
-+	struct iphdr* iphdr0 = (struct iphdr*)&(skb->data[0]);
-+	int ip_hdrlen = iphdr0->ihl << 2;
-+	struct tcphdr* tcphdr0 = (struct tcphdr*)&(skb->data[ip_hdrlen]);
-+
-+	if (!jumbo_skb->skb0) {
-+		// head of the jumbo frame.
-+		jumbo_skb->skb0 = skb;
-+		jumbo_skb->tail = 0;
-+		jumbo_skb->iphdr0 = iphdr0;
-+		jumbo_skb->tcphdr0 = tcphdr0;
-+	} else {
-+		if (!jumbo_skb->tail)
-+			skb_shinfo(jumbo_skb->skb0)->frag_list = skb;
-+		else
-+			(jumbo_skb->tail)->next = skb;
-+		jumbo_skb->tail = skb;
-+
-+		// do we need to change truesize as well?
-+		jumbo_skb->skb0->len += payload_len;
-+		jumbo_skb->skb0->data_len += payload_len;
-+
-+		jumbo_skb->iphdr0->tot_len = htons(ntohs(jumbo_skb->iphdr0->tot_len)+payload_len);
-+		jumbo_skb->tcphdr0->ack_seq = tcphdr0->ack_seq;
-+		jumbo_skb->tcphdr0->window = tcphdr0->window;
-+
-+		skb->len += payload_len;
-+		skb->data_len = 0;
-+		skb->data += ntohs(iphdr0->tot_len) - payload_len;
-+	}
-+}
-+
-+/*----------------------------------------------------------------------
-+* toe_gmac_handle_toeq
-+* (1) read interrupt Queue to get TOE Q.
-+* (2) get packet fro TOE Q and send to upper layer handler.
-+* (3) allocate new buffers and put to TOE Q. Intr Q buffer is recycled.
-+*----------------------------------------------------------------------*/
-+void toe_gmac_handle_toeq(struct net_device *dev, GMAC_INFO_T* tp, __u32 status)
-+{
-+	//volatile INTRQ_INFO_T	*intrq_info;
-+	//TOEQ_INFO_T		*toeq_info;
-+	volatile NONTOE_QHDR_T	*intr_qhdr;
-+	volatile TOE_QHDR_T		*toe_qhdr;
-+	volatile INTR_QHDR_T	*intr_curr_desc;
-+	TOE_INFO_T	*toe = &toe_private_data;
-+
-+	volatile GMAC_RXDESC_T	*toe_curr_desc; // , *fq_desc;// *tmp_desc;
-+	volatile DMA_RWPTR_T	intr_rwptr, toeq_rwptr;  // fq_rwptr;
-+
-+	unsigned int 	pkt_size, desc_count, tcp_qid;
-+	volatile unsigned int	toeq_wptr;
-+	struct toe_conn*		connection;
-+	int		i, frag_id = 0;
-+	// unsigned long	toeq_flags;
-+	struct jumbo_frame	jumbo_skb;
-+	struct sk_buff	*skb;
-+	__u32	interrupt_status;
-+
-+	in_toe_isr++;
-+
-+	interrupt_status = status >> 24;
-+	// get interrupt queue header
-+	intr_qhdr = (volatile NONTOE_QHDR_T*)TOE_INTR_Q_HDR_BASE;
-+	memset(&jumbo_skb, 0, sizeof(struct jumbo_frame));
-+
-+	for (i=0; i> 1;
-+			continue;
-+		}
-+		interrupt_status = interrupt_status >> 1;
-+		intr_rwptr.bits32 = readl(&intr_qhdr->word1);
-+
-+		while ( intr_rwptr.bits.rptr != intr_rwptr.bits.wptr) {
-+			int max_pktsize = 1;
-+			// get interrupt queue descriptor.
-+			intr_curr_desc = (INTR_QHDR_T*)toe->intr_desc_base +
-+				i* TOE_INTR_DESC_NUM + intr_rwptr.bits.rptr;
-+//			printk("%s::int %x\n", __func__, intr_curr_desc->word1.bits32);
-+			// get toeq id
-+			tcp_qid = (u8)intr_curr_desc->word1.bits.tcp_qid - (u8)TOE_TOE_QID(0);
-+			// get toeq queue header
-+			toe_qhdr = (volatile TOE_QHDR_T*) TOE_TOE_QUE_HDR_BASE;
-+			toe_qhdr += tcp_qid;
-+			connection = &toe_connections[tcp_qid];
-+			del_timer(&connection->rx_timer);
-+			// Gary Chen spin_lock_irqsave(&connection->conn_lock, toeq_flags);
-+			// handling interrupts of this TOE Q.
-+			if (intr_curr_desc->word1.bits.ctl || intr_curr_desc->word1.bits.osq ||
-+				intr_curr_desc->word1.bits.abn)
-+				max_pktsize = 0;
-+			if (!max_pktsize || intr_curr_desc->word1.bits.TotalPktSize) {
-+				desc_count=0;
-+				// wptr in intl queue is where this TOE interrupt should stop.
-+				toeq_rwptr.bits32 = readl(&toe_qhdr->word1);
-+				toeq_wptr = intr_curr_desc->word0.bits.wptr;
-+				if (connection->toeq_rwptr.bits.rptr != toeq_rwptr.bits.rptr)
-+					printk("conn rptr %d, hw rptr %d\n",
-+						connection->toeq_rwptr.bits.rptr, toeq_rwptr.bits.rptr);
-+
-+				if (intr_curr_desc->word1.bits.ctl &&
-+					(toeq_rwptr.bits.rptr == toeq_wptr)) {
-+					printk("\nctrl frame, but not in TOE queue! conn rptr %d, hw wptr %d\n",
-+						connection->toeq_rwptr.bits.rptr, toeq_wptr);
-+//					dump_toe_qhdr(toe_qhdr);
-+//					dump_intrq_desc(intr_curr_desc);
-+				}
-+				// while (toeq_rwptr.bits.rptr != intr_curr_desc->word0.bits.wptr) {
-+				while (toe_qhdr->word1.bits.rptr != intr_curr_desc->word0.bits.wptr) {
-+					frag_id++;
-+					toe_curr_desc = (volatile GMAC_RXDESC_T *)(toe->toe_desc_base[tcp_qid]
-+						+ toe_qhdr->word1.bits.rptr *sizeof(GMAC_RXDESC_T));
-+					connection->curr_desc = (GMAC_RXDESC_T *)toe_curr_desc;
-+					desc_count = toe_curr_desc->word0.bits.desc_count;
-+					pkt_size = toe_curr_desc->word1.bits.byte_count;
-+					consistent_sync((void*)__va(toe_curr_desc->word2.buf_adr), pkt_size,
-+						PCI_DMA_FROMDEVICE);
-+					skb = (struct sk_buff*)(REG32(__va(toe_curr_desc->word2.buf_adr)-
-+						SKB_RESERVE_BYTES));
-+					_debug_skb(skb, (GMAC_RXDESC_T *)toe_curr_desc, 0x01);
-+					connection->curr_rx_skb = skb;
-+					skb_reserve(skb, RX_INSERT_BYTES);
-+					if ((skb->len + pkt_size) > (1514+16))
-+					{
-+						printk("skb->len=%d, pkt_size=%d\n",skb->len, pkt_size);
-+						while(1);
-+					}
-+
-+					skb_put(skb, pkt_size);
-+					skb->dev = dev;
-+					skb->protocol = eth_type_trans(skb, dev);
-+					skb->ip_summed = CHECKSUM_UNNECESSARY;
-+
-+					if (toe_curr_desc->word3.bits32 & 0x1b000000)
-+						dump_jumbo_skb(&jumbo_skb);
-+
-+					rx_append_skb(&jumbo_skb, skb, pkt_size-toe_curr_desc->word3.bits.l7_offset);
-+//					spin_lock_irqsave(&gmac_fq_lock, flags);
-+					toeq_rwptr.bits.rptr = RWPTR_ADVANCE_ONE(toeq_rwptr.bits.rptr, TOE_TOE_DESC_NUM);
-+					SET_RPTR(&toe_qhdr->word1, toeq_rwptr.bits.rptr);
-+//					spin_unlock_irqrestore(&gmac_fq_lock, flags);
-+					if (storlink_ctl.fqint_threshold)
-+						continue;
-+#if 0
-+//#if (HANDLE_FREEQ_METHOD == HANDLE_FREEQ_INDIVIDUAL)
-+					if ((skb = dev_alloc_skb(RX_BUF_SIZE)) == NULL) {
-+						printk("%s::toe queue alloc buffer ", __func__);
-+					}
-+					*(unsigned int*)(skb->data) = (unsigned int)skb;
-+					connection->curr_rx_skb = skb;
-+					skb_reserve(skb, SKB_RESERVE_BYTES);
-+
-+					spin_lock_irqsave(&gmac_fq_lock, flags);
-+					fq_rwptr.bits32 = readl(TOE_GLOBAL_BASE + GLOBAL_SWFQ_RWPTR_REG);
-+					if (toe->fq_rx_rwptr.bits.wptr != fq_rwptr.bits.wptr) {
-+						printk("%s::fq_rx_rwptr %x\n", __func__, toe->fq_rx_rwptr.bits32);
-+						mac_stop_txdma((struct net_device*) tp->dev);
-+						spin_unlock_irqrestore(&gmac_fq_lock, flags);
-+						while(1);
-+					}
-+					fq_desc = (GMAC_RXDESC_T*)toe->swfq_desc_base + fq_rwptr.bits.wptr;
-+					fq_desc->word2.buf_adr = (unsigned int)__pa(skb->data);
-+
-+					fq_rwptr.bits.wptr = RWPTR_ADVANCE_ONE(fq_rwptr.bits.wptr, TOE_SW_FREEQ_DESC_NUM);
-+					SET_WPTR(TOE_GLOBAL_BASE + GLOBAL_SWFQ_RWPTR_REG, fq_rwptr.bits.wptr);
-+					toe->fq_rx_rwptr.bits32 = fq_rwptr.bits32;
-+					spin_unlock_irqrestore(&gmac_fq_lock, flags);
-+#endif
-+				} // end of this multi-desc.
-+				dump_jumbo_skb(&jumbo_skb);
-+				dev->last_rx = jiffies;
-+				connection->toeq_rwptr.bits32 = toeq_rwptr.bits32;
-+			} else if (intr_curr_desc->word1.bits.sat) {
-+				toeq_rwptr.bits32 = readl(&toe_qhdr->word1);
-+				toeq_wptr = intr_curr_desc->word0.bits.wptr;
-+				if (connection->toeq_rwptr.bits.rptr != toeq_rwptr.bits.rptr)
-+					printk("SAT. conn rptr %d, hw rptr %d\n",
-+						connection->toeq_rwptr.bits.rptr, toeq_rwptr.bits.rptr);
-+/*
-+					printk("%s::SAT int!, ackcnt %x, seqcnt %x, rptr %d, wptr %d, ack %x, qhack %x\n",
-+ 						__func__, intr_curr_desc->word4.bits.AckCnt, intr_curr_desc->word4.bits.SeqCnt,
-+						toeq_rptr, toeq_wptr, intr_curr_desc->word3.ack_num, toe_qhdr->word4.ack_num);*/
-+				/* pure ack */
-+				if (toeq_rwptr.bits.rptr == toeq_wptr) {
-+					if (intr_curr_desc->word4.bits32) {
-+						skb = gen_pure_ack(connection, (TOE_QHDR_T *)toe_qhdr, (INTR_QHDR_T *)intr_curr_desc);
-+						skb_put(skb, 60);
-+						skb->dev = connection->dev;
-+						skb->ip_summed = CHECKSUM_UNNECESSARY;
-+						skb->protocol = eth_type_trans(skb, connection->dev);
-+						netif_rx(skb);
-+					} else
-+						printk("%s::SAT Interrupt!. But cnt is 0!\n", __func__);
-+				} else {
-+					// while (toeq_rwptr.bits.rptr != toeq_wptr) {
-+					while (toe_qhdr->word1.bits.rptr != intr_curr_desc->word0.bits.wptr) {
-+						toe_curr_desc = (volatile GMAC_RXDESC_T*)(toe->toe_desc_base[tcp_qid]
-+							+ toe_qhdr->word1.bits.rptr * sizeof(GMAC_RXDESC_T));
-+						connection->curr_desc = (GMAC_RXDESC_T *)toe_curr_desc;
-+						desc_count = toe_curr_desc->word0.bits.desc_count;
-+						pkt_size = toe_curr_desc->word1.bits.byte_count;
-+						consistent_sync((void*)__va(toe_curr_desc->word2.buf_adr), pkt_size,
-+							PCI_DMA_FROMDEVICE);
-+						// if ( ((toeq_rwptr.bits.rptr +1)&(TOE_TOE_DESC_NUM-1)) == toeq_wptr) {
-+						if ( RWPTR_ADVANCE_ONE(toe_qhdr->word1.bits.rptr, TOE_TOE_DESC_NUM) == toeq_wptr) {
-+							skb = (struct sk_buff*)(REG32(__va(toe_curr_desc->word2.buf_adr) -
-+								SKB_RESERVE_BYTES));
-+							_debug_skb(skb, (GMAC_RXDESC_T *)toe_curr_desc, 0x04);
-+							connection->curr_rx_skb = skb;
-+							skb_reserve(skb, RX_INSERT_BYTES);
-+							skb_put(skb, pkt_size);
-+							skb->dev = dev;
-+							skb->protocol = eth_type_trans(skb, dev);
-+							skb->ip_summed = CHECKSUM_UNNECESSARY;
-+							// printk("toeq_rptr %d, wptr %d\n", toeq_rptr, toeq_wptr);
-+							netif_rx(skb);
-+							dev->last_rx = jiffies;
-+/*
-+							if ((skb = dev_alloc_skb(RX_BUF_SIZE)) == NULL) {
-+
-+							}
-+							*(unsigned int*)(skb->data) = (unsigned int) skb;
-+							skb_reserve(skb, SKB_RESERVE_BYTES); */
-+						} else {
-+							// reuse this skb, append to free queue..
-+							skb = (struct sk_buff*)(REG32(__va(toe_curr_desc->word2.buf_adr)-
-+								SKB_RESERVE_BYTES));
-+							_debug_skb(skb, (GMAC_RXDESC_T *)toe_curr_desc, 0x05);
-+							connection->curr_rx_skb = skb;
-+							dev_kfree_skb_irq(skb);
-+						}
-+#if 0
-+						spin_lock_irqsave(&gmac_fq_lock, flags);
-+						fq_rwptr.bits32 = readl(TOE_GLOBAL_BASE + GLOBAL_SWFQ_RWPTR_REG);
-+/*						if (toe->fq_rx_rwptr.bits.wptr != fq_rwptr.bits.wptr) {
-+							printk("%s::fq_rx_rwptr %x\n", __func__, toe->fq_rx_rwptr.bits32);
-+							mac_stop_txdma((struct net_device*) tp->dev);
-+							spin_unlock_irqrestore(&gmac_fq_lock, flags);
-+							while(1);
-+						} */
-+						fq_desc = (GMAC_RXDESC_T*)toe->swfq_desc_base + fq_rwptr.bits.wptr;
-+						fq_desc->word2.buf_adr = (unsigned int)__pa(skb->data);
-+
-+						fq_rwptr.bits.wptr = RWPTR_ADVANCE_ONE(fq_rwptr.bits.wptr, TOE_SW_FREEQ_DESC_NUM);
-+						SET_WPTR(TOE_GLOBAL_BASE + GLOBAL_SWFQ_RWPTR_REG, fq_rwptr.bits.wptr);
-+						toe->fq_rx_rwptr.bits32 = fq_rwptr.bits32;
-+	//					spin_unlock_irqrestore(&gmac_fq_lock, flags);
-+#endif
-+//						spin_lock_irqsave(&gmac_fq_lock, flags);
-+						toeq_rwptr.bits.rptr = RWPTR_ADVANCE_ONE(toeq_rwptr.bits.rptr, TOE_TOE_DESC_NUM);
-+						SET_RPTR(&toe_qhdr->word1, toeq_rwptr.bits.rptr);
-+//						spin_unlock_irqrestore(&gmac_fq_lock, flags);
-+					}
-+				} // end of ACK with options.
-+				connection->toeq_rwptr.bits32 = toeq_rwptr.bits32;
-+				// Gary Chen spin_unlock_irqrestore(&connection->conn_lock, toeq_flags);
-+//				}
-+			};
-+			update_timer(connection);
-+			// any protection against interrupt queue header?
-+			intr_rwptr.bits.rptr = RWPTR_ADVANCE_ONE(intr_rwptr.bits.rptr, TOE_INTR_DESC_NUM);
-+			SET_RPTR(&intr_qhdr->word1, intr_rwptr.bits.rptr);
-+			intr_rwptr.bits32 = readl(&intr_qhdr->word1);
-+			toe_gmac_fill_free_q();
-+		} // end of this interrupt Queue processing.
-+	} // end of all interrupt Queues.
-+
-+	in_toe_isr = 0;
-+}
-+
-+
---- /dev/null
-+++ b/drivers/net/sl_lepus_hash.c
-@@ -0,0 +1,553 @@
-+/**************************************************************************
-+* Copyright 2006 StorLink Semiconductors, Inc.  All rights reserved.
-+*--------------------------------------------------------------------------
-+* Name			: sl_lepus_hash.c
-+* Description	:
-+*		Handle Storlink Lepus Hash Functions
-+*
-+* History
-+*
-+*	Date		Writer		Description
-+*----------------------------------------------------------------------------
-+*	03/13/2006	Gary Chen	Create and implement
-+*
-+****************************************************************************/
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#define	 MIDWAY
-+#define	 SL_LEPUS
-+
-+#include 
-+#include 
-+#include 
-+
-+#ifndef RXTOE_DEBUG
-+#define RXTOE_DEBUG
-+#endif
-+#undef RXTOE_DEBUG
-+
-+/*----------------------------------------------------------------------
-+* Definition
-+*----------------------------------------------------------------------*/
-+#define	hash_printf				printk
-+
-+#define HASH_TIMER_PERIOD		(60*HZ)	// seconds
-+#define HASH_ILLEGAL_INDEX		0xffff
-+
-+/*----------------------------------------------------------------------
-+* Variables
-+*----------------------------------------------------------------------*/
-+u32					hash_activate_bits[HASH_TOTAL_ENTRIES/32];
-+u32					hash_nat_owner_bits[HASH_TOTAL_ENTRIES/32];
-+char 				hash_tables[HASH_TOTAL_ENTRIES][HASH_MAX_BYTES] __attribute__ ((aligned(16)));
-+static struct timer_list hash_timer_obj;
-+LIST_HEAD(hash_timeout_list);
-+
-+/*----------------------------------------------------------------------
-+* Functions
-+*----------------------------------------------------------------------*/
-+void dm_long(u32 location, int length);
-+static void hash_timer_func(u32 data);
-+
-+/*----------------------------------------------------------------------
-+* hash_init
-+*----------------------------------------------------------------------*/
-+void hash_init(void)
-+{
-+	int i;
-+	volatile u32 *dp1, *dp2, dword;
-+
-+	dp1 = (volatile u32 *) TOE_V_BIT_BASE;
-+	dp2 = (volatile u32 *) TOE_A_BIT_BASE;
-+
-+	for (i=0; iindex, 1);
-+//	printk("Dump hash key!\n");
-+//	dump_hash_key(entry);
-+	return entry->index;
-+}
-+
-+/*----------------------------------------------------------------------
-+* hash_set_valid_flag
-+*----------------------------------------------------------------------*/
-+void hash_set_valid_flag(int index, int valid)
-+{
-+	register u32 reg32;
-+
-+	reg32 = TOE_V_BIT_BASE + (index/32) * 4;
-+
-+	if (valid)
-+	{
-+		writel(readl(reg32) | (1 << (index%32)), reg32);
-+	}
-+	else
-+	{
-+		writel(readl(reg32) & ~(1 << (index%32)), reg32);
-+	}
-+}
-+
-+/*----------------------------------------------------------------------
-+* hash_set_nat_owner_flag
-+*----------------------------------------------------------------------*/
-+void hash_set_nat_owner_flag(int index, int valid)
-+{
-+	if (valid)
-+	{
-+		hash_nat_owner_bits[index/32] |= (1 << (index % 32));
-+	}
-+	else
-+	{
-+		hash_nat_owner_bits[index/32] &= ~(1 << (index % 32));
-+	}
-+}
-+
-+
-+/*----------------------------------------------------------------------
-+* hash_build_keys
-+*----------------------------------------------------------------------*/
-+int hash_build_keys(u32 *destp, HASH_ENTRY_T *entry)
-+{
-+	u32 	data;
-+	unsigned char 	*cp;
-+	int				i, j;
-+	unsigned short 	index;
-+	int 			total;
-+
-+	memset((void *)destp, 0, HASH_MAX_BYTES);
-+	cp = (unsigned char *)destp;
-+
-+	if (entry->key_present.port || entry->key_present.Ethertype)
-+	{
-+		HASH_PUSH_WORD(cp, entry->key.Ethertype);		// word 0
-+		HASH_PUSH_BYTE(cp, entry->key.port);			// Byte 2
-+		HASH_PUSH_BYTE(cp, 0);							// Byte 3
-+	}
-+	else
-+	{
-+		HASH_PUSH_DWORD(cp, 0);
-+	}
-+
-+	if (entry->key_present.da || entry->key_present.sa)
-+	{
-+		unsigned char mac[4];
-+		if (entry->key_present.da)
-+		{
-+			for (i=0; i<4; i++)
-+				HASH_PUSH_BYTE(cp, entry->key.da[i]);
-+		}
-+		mac[0] = (entry->key_present.da) ? entry->key.da[4] : 0;
-+		mac[1] = (entry->key_present.da) ? entry->key.da[5] : 0;
-+		mac[2] = (entry->key_present.sa) ? entry->key.sa[0] : 0;
-+		mac[3] = (entry->key_present.sa) ? entry->key.sa[1] : 0;
-+		data = mac[0] + (mac[1]<<8) + (mac[2]<<16) + (mac[3]<<24);
-+		HASH_PUSH_DWORD(cp, data);
-+		if (entry->key_present.sa)
-+		{
-+			for (i=2; i<6; i++)
-+				HASH_PUSH_BYTE(cp, entry->key.sa[i]);
-+		}
-+	}
-+
-+	if (entry->key_present.pppoe_sid || entry->key_present.vlan_id)
-+	{
-+		HASH_PUSH_WORD(cp, entry->key.vlan_id);		// low word
-+		HASH_PUSH_WORD(cp, entry->key.pppoe_sid);	// high word
-+	}
-+	if (entry->key_present.ipv4_hdrlen || entry->key_present.ip_tos || entry->key_present.ip_protocol)
-+	{
-+		HASH_PUSH_BYTE(cp, entry->key.ip_protocol);		// Byte 0
-+		HASH_PUSH_BYTE(cp, entry->key.ip_tos);			// Byte 1
-+		HASH_PUSH_BYTE(cp, entry->key.ipv4_hdrlen);		// Byte 2
-+		HASH_PUSH_BYTE(cp, 0);							// Byte 3
-+	}
-+
-+	if (entry->key_present.ipv6_flow_label)
-+	{
-+		HASH_PUSH_DWORD(cp, entry->key.ipv6_flow_label);	// low word
-+	}
-+	if (entry->key_present.sip)
-+	{
-+		// input (entry->key.sip[i]) is network-oriented
-+		// output (hash key) is host-oriented
-+		for (i=3; i>=0; i--)
-+			HASH_PUSH_BYTE(cp, entry->key.sip[i]);
-+		if (entry->key.ipv6)
-+		{
-+			for (i=4; i<16; i+=4)
-+			{
-+				for (j=i+3; j>=i; j--)
-+					HASH_PUSH_BYTE(cp, entry->key.sip[j]);
-+			}
-+		}
-+	}
-+	if (entry->key_present.dip)
-+	{
-+		// input (entry->key.sip[i]) is network-oriented
-+		// output (hash key) is host-oriented
-+		for (i=3; i>=0; i--)
-+			HASH_PUSH_BYTE(cp, entry->key.dip[i]);
-+		if (entry->key.ipv6)
-+		{
-+			for (i=4; i<16; i+=4)
-+			{
-+				for (j=i+3; j>=i; j--)
-+					HASH_PUSH_BYTE(cp, entry->key.dip[j]);
-+			}
-+		}
-+	}
-+
-+	if (entry->key_present.l4_bytes_0_3)
-+	{
-+		HASH_PUSH_BYTE(cp, entry->key.l4_bytes[0]);
-+		HASH_PUSH_BYTE(cp, entry->key.l4_bytes[1]);
-+		HASH_PUSH_BYTE(cp, entry->key.l4_bytes[2]);
-+		HASH_PUSH_BYTE(cp, entry->key.l4_bytes[3]);
-+	}
-+	if (entry->key_present.l4_bytes_4_7)
-+	{
-+		HASH_PUSH_BYTE(cp, entry->key.l4_bytes[4]);
-+		HASH_PUSH_BYTE(cp, entry->key.l4_bytes[5]);
-+		HASH_PUSH_BYTE(cp, entry->key.l4_bytes[6]);
-+		HASH_PUSH_BYTE(cp, entry->key.l4_bytes[7]);
-+	}
-+	if (entry->key_present.l4_bytes_8_11)
-+	{
-+		HASH_PUSH_BYTE(cp, entry->key.l4_bytes[8]);
-+		HASH_PUSH_BYTE(cp, entry->key.l4_bytes[9]);
-+		HASH_PUSH_BYTE(cp, entry->key.l4_bytes[10]);
-+		HASH_PUSH_BYTE(cp, entry->key.l4_bytes[11]);
-+	}
-+	if (entry->key_present.l4_bytes_12_15)
-+	{
-+		HASH_PUSH_BYTE(cp, entry->key.l4_bytes[12]);
-+		HASH_PUSH_BYTE(cp, entry->key.l4_bytes[13]);
-+		HASH_PUSH_BYTE(cp, entry->key.l4_bytes[14]);
-+		HASH_PUSH_BYTE(cp, entry->key.l4_bytes[15]);
-+	}
-+	if (entry->key_present.l4_bytes_16_19)
-+	{
-+		HASH_PUSH_BYTE(cp, entry->key.l4_bytes[16]);
-+		HASH_PUSH_BYTE(cp, entry->key.l4_bytes[17]);
-+		HASH_PUSH_BYTE(cp, entry->key.l4_bytes[18]);
-+		HASH_PUSH_BYTE(cp, entry->key.l4_bytes[19]);
-+	}
-+	if (entry->key_present.l4_bytes_20_23)
-+	{
-+		HASH_PUSH_BYTE(cp, entry->key.l4_bytes[20]);
-+		HASH_PUSH_BYTE(cp, entry->key.l4_bytes[21]);
-+		HASH_PUSH_BYTE(cp, entry->key.l4_bytes[22]);
-+		HASH_PUSH_BYTE(cp, entry->key.l4_bytes[23]);
-+	}
-+	if (entry->key_present.l7_bytes_0_3)
-+	{
-+		HASH_PUSH_BYTE(cp, entry->key.l7_bytes[0]);
-+		HASH_PUSH_BYTE(cp, entry->key.l7_bytes[1]);
-+		HASH_PUSH_BYTE(cp, entry->key.l7_bytes[2]);
-+		HASH_PUSH_BYTE(cp, entry->key.l7_bytes[3]);
-+	}
-+	if (entry->key_present.l7_bytes_4_7)
-+	{
-+		HASH_PUSH_BYTE(cp, entry->key.l7_bytes[4]);
-+		HASH_PUSH_BYTE(cp, entry->key.l7_bytes[5]);
-+		HASH_PUSH_BYTE(cp, entry->key.l7_bytes[6]);
-+		HASH_PUSH_BYTE(cp, entry->key.l7_bytes[7]);
-+	}
-+	if (entry->key_present.l7_bytes_8_11)
-+	{
-+		HASH_PUSH_BYTE(cp, entry->key.l7_bytes[8]);
-+		HASH_PUSH_BYTE(cp, entry->key.l7_bytes[9]);
-+		HASH_PUSH_BYTE(cp, entry->key.l7_bytes[10]);
-+		HASH_PUSH_BYTE(cp, entry->key.l7_bytes[11]);
-+	}
-+	if (entry->key_present.l7_bytes_12_15)
-+	{
-+		HASH_PUSH_BYTE(cp, entry->key.l7_bytes[12]);
-+		HASH_PUSH_BYTE(cp, entry->key.l7_bytes[13]);
-+		HASH_PUSH_BYTE(cp, entry->key.l7_bytes[14]);
-+		HASH_PUSH_BYTE(cp, entry->key.l7_bytes[15]);
-+	}
-+	if (entry->key_present.l7_bytes_16_19)
-+	{
-+		HASH_PUSH_BYTE(cp, entry->key.l7_bytes[16]);
-+		HASH_PUSH_BYTE(cp, entry->key.l7_bytes[17]);
-+		HASH_PUSH_BYTE(cp, entry->key.l7_bytes[18]);
-+		HASH_PUSH_BYTE(cp, entry->key.l7_bytes[19]);
-+	}
-+	if (entry->key_present.l7_bytes_20_23)
-+	{
-+		HASH_PUSH_BYTE(cp, entry->key.l7_bytes[20]);
-+		HASH_PUSH_BYTE(cp, entry->key.l7_bytes[21]);
-+		HASH_PUSH_BYTE(cp, entry->key.l7_bytes[22]);
-+		HASH_PUSH_BYTE(cp, entry->key.l7_bytes[23]);
-+	}
-+
-+	// get hash index
-+	total = (u32)((u32)cp - (u32)destp) / (sizeof(u32));
-+
-+	if (total > HASH_MAX_KEY_DWORD)
-+	{
-+		//hash_printf("Total key words (%d) is too large (> %d)!\n",
-+		//				total, HASH_MAX_KEY_DWORD);
-+		return -1;
-+	}
-+
-+	if (entry->key_present.port || entry->key_present.Ethertype)
-+		index = hash_gen_crc16((unsigned char *)destp, total * 4);
-+	else
-+	{
-+		if (total == 1)
-+		{
-+			hash_printf("No key is assigned!\n");
-+			return -1;
-+		}
-+
-+		index = hash_gen_crc16((unsigned char *)(destp+1), (total-1) * 4);
-+	}
-+
-+	entry->index = index & HASH_BITS_MASK;
-+
-+	//hash_printf("Total key words = %d, Hash Index= %d\n",
-+	//				total, entry->index);
-+
-+	cp = (unsigned char *)destp;
-+	cp+=3;
-+	HASH_PUSH_BYTE(cp, entry->rule);	// rule
-+
-+	entry->total_dwords = total;
-+
-+	return total;
-+}
-+
-+/*----------------------------------------------------------------------
-+* hash_build_nat_keys
-+*----------------------------------------------------------------------*/
-+void hash_build_nat_keys(u32 *destp, HASH_ENTRY_T *entry)
-+{
-+	unsigned char 	*cp;
-+	int				i;
-+	unsigned short 	index;
-+	int 			total;
-+
-+	memset((void *)destp, 0, HASH_MAX_BYTES);
-+
-+	cp = (unsigned char *)destp + 2;
-+	HASH_PUSH_BYTE(cp, entry->key.port);
-+	cp++;
-+
-+	if (entry->key_present.pppoe_sid || entry->key_present.vlan_id)
-+	{
-+		HASH_PUSH_WORD(cp, entry->key.vlan_id);		// low word
-+		HASH_PUSH_WORD(cp, entry->key.pppoe_sid);	// high word
-+	}
-+
-+	HASH_PUSH_BYTE(cp, entry->key.ip_protocol);
-+	cp+=3;
-+
-+	// input (entry->key.sip[i]) is network-oriented
-+	// output (hash key) is host-oriented
-+	for (i=3; i>=0; i--)
-+		HASH_PUSH_BYTE(cp, entry->key.sip[i]);
-+
-+	// input (entry->key.sip[i]) is network-oriented
-+	// output (hash key) is host-oriented
-+	for (i=3; i>=0; i--)
-+		HASH_PUSH_BYTE(cp, entry->key.dip[i]);
-+
-+	HASH_PUSH_BYTE(cp, entry->key.l4_bytes[0]);
-+	HASH_PUSH_BYTE(cp, entry->key.l4_bytes[1]);
-+	HASH_PUSH_BYTE(cp, entry->key.l4_bytes[2]);
-+	HASH_PUSH_BYTE(cp, entry->key.l4_bytes[3]);
-+
-+	// get hash index
-+	total = (u32)((u32)cp - (u32)destp) / (sizeof(u32));
-+
-+	index = hash_gen_crc16((unsigned char *)destp, total * 4);
-+	entry->index = index & ((1 << HASH_BITS) - 1);
-+
-+	cp = (unsigned char *)destp;
-+	cp+=3;
-+	HASH_PUSH_BYTE(cp, entry->rule);	// rule
-+
-+	entry->total_dwords = total;
-+}
-+
-+
-+/*----------------------------------------------------------------------
-+* hash_write_entry
-+*----------------------------------------------------------------------*/
-+int hash_write_entry(HASH_ENTRY_T *entry, unsigned char *key)
-+{
-+	int		i;
-+	u32		*srcep, *destp, *destp2;
-+
-+	srcep = (u32 *)key;
-+	destp2 = destp = (u32 *)&hash_tables[entry->index][0];
-+
-+	for (i=0; i<(entry->total_dwords); i++, srcep++, destp++)
-+		*destp = *srcep;
-+
-+	srcep = (u32 *)&entry->action;
-+	*destp++ = *srcep;
-+
-+	srcep = (u32 *)&entry->param;
-+	for (i=0; i<(sizeof(ENTRY_PARAM_T)/sizeof(*destp)); i++, srcep++, destp++)
-+		*destp = *srcep;
-+
-+	memset(destp, 0, (HASH_MAX_DWORDS-entry->total_dwords-HASH_ACTION_DWORDS) * sizeof(u32));
-+
-+	consistent_sync(destp2, (entry->total_dwords+HASH_ACTION_DWORDS) * 4, PCI_DMA_TODEVICE);
-+	return 0;
-+}
-+
-+/*----------------------------------------------------------------------
-+* hash_timer_func
-+*----------------------------------------------------------------------*/
-+static void hash_timer_func(u32 data)
-+{
-+	int				i, j;
-+	volatile u32	*active_p, *own_p, *valid_p;
-+	u32				a_bits, own_bits;
-+
-+	valid_p = (volatile u32 *)TOE_V_BIT_BASE;
-+	active_p = (volatile u32 *)hash_activate_bits;
-+	own_p = (volatile u32 *)hash_nat_owner_bits;
-+	for (i=0; i<(HASH_TOTAL_ENTRIES/32); i++, own_p++, active_p++, valid_p++)
-+	{
-+		*active_p |= readl(TOE_A_BIT_BASE + (i*4));
-+		a_bits = *active_p;
-+		own_bits = *own_p;
-+		if (own_bits)
-+		{
-+#ifndef DEBUG_NAT_MIXED_HW_SW_TX
-+			a_bits = own_bits & ~a_bits;
-+#else
-+			a_bits = own_bits & a_bits;
-+#endif
-+			for (j=0; a_bits && j<32; j++)
-+			{
-+				if (a_bits & 1)
-+				{
-+					*valid_p &= ~(1 << j);		// invalidate it
-+#if !(defined(NAT_DEBUG_LAN_HASH_TIMEOUT) || defined(NAT_DEBUG_WAN_HASH_TIMEOUT))
-+					*own_p &= ~(1 << j);		// release ownership for NAT
-+#endif
-+// #ifdef DEBUG_NAT_MIXED_HW_SW_TX
-+#if 0
-+					hash_printf("%lu %s: Clear hash index: %d\n", jiffies/HZ, __func__, i*32+j);
-+#endif
-+				}
-+				a_bits >>= 1;
-+			}
-+			*active_p &= ~own_bits;		// deactivate it for next polling
-+		}
-+	}
-+
-+	hash_timer_obj.expires = jiffies + HASH_TIMER_PERIOD;
-+	add_timer((struct timer_list *)data);
-+}
-+
-+/*----------------------------------------------------------------------
-+* dm_long
-+*----------------------------------------------------------------------*/
-+void dm_long(u32 location, int length)
-+{
-+	u32		*start_p, *curr_p, *end_p;
-+	u32		*datap, data;
-+	int		i;
-+
-+	//if (length > 1024)
-+	//	length = 1024;
-+
-+	start_p = (u32 *)location;
-+	end_p = (u32 *)location + length;
-+	curr_p = (u32 *)((u32)location & 0xfffffff0);
-+	datap = (u32 *)location;
-+	while (curr_p < end_p)
-+	{
-+		hash_printf("0x%08x: ",(u32)curr_p & 0xfffffff0);
-+		for (i=0; i<4; i++)
-+		{
-+			if (curr_p < start_p || curr_p >= end_p)
-+               hash_printf("         ");
-+			else
-+			{
-+				data = *datap;
-+				hash_printf("%08X ", data);
-+			}
-+			if (i==1)
-+              hash_printf("- ");
-+
-+			curr_p++;
-+			datap++;
-+		}
-+        hash_printf("\n");
-+	}
-+}
-+
-+/*----------------------------------------------------------------------
-+* hash_dump_entry
-+*----------------------------------------------------------------------*/
-+void hash_dump_entry(int index)
-+{
-+	hash_printf("Hash Index %d:\n", index);
-+	dm_long((u32)&hash_tables[index][0], HASH_MAX_DWORDS);
-+}
-+
-+
---- /dev/null
-+++ b/drivers/net/sl_switch.c
-@@ -0,0 +1,650 @@
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+
-+#define GMAC_GLOBAL_BASE_ADDR       (IO_ADDRESS(SL2312_GLOBAL_BASE))
-+#define GPIO_BASE_ADDR1  (IO_ADDRESS(SL2312_GPIO_BASE1))
-+enum GPIO_REG
-+{
-+    GPIO_DATA_OUT   = 0x00,
-+    GPIO_DATA_IN    = 0x04,
-+    GPIO_PIN_DIR    = 0x08,
-+    GPIO_BY_PASS    = 0x0c,
-+    GPIO_DATA_SET   = 0x10,
-+    GPIO_DATA_CLEAR = 0x14,
-+};
-+
-+#define GMAC_SPEED_10			0
-+#define GMAC_SPEED_100			1
-+#define GMAC_SPEED_1000			2
-+
-+enum phy_state
-+{
-+    LINK_DOWN   = 0,
-+    LINK_UP     = 1
-+};
-+
-+#ifndef BIT
-+#define BIT(x)						(1 << (x))
-+#endif
-+
-+//int Get_Set_port_status();
-+unsigned int SPI_read_bit(void);
-+void SPI_write_bit(char bit_EEDO);
-+void SPI_write(unsigned char block,unsigned char subblock,unsigned char addr,unsigned int value);
-+unsigned int SPI_read(unsigned char block,unsigned char subblock,unsigned char addr);
-+int SPI_default(void);
-+void SPI_CS_enable(unsigned char enable);
-+unsigned int SPI_get_identifier(void);
-+void phy_write(unsigned char port_no,unsigned char reg,unsigned int val);
-+unsigned int phy_read(unsigned char port_no,unsigned char reg);
-+void phy_write_masked(unsigned char port_no,unsigned char reg,unsigned int val,unsigned int mask);
-+void init_seq_7385(unsigned char port_no) ;
-+void phy_receiver_init (unsigned char port_no);
-+
-+#define PORT_NO		4
-+int switch_pre_speed[PORT_NO]={0,0,0,0};
-+int switch_pre_link[PORT_NO]={0,0,0,0};
-+
-+
-+
-+
-+
-+/*				NOTES
-+ *   The Protocol of the SPI are as follows:
-+ *
-+ *     		   Bit7 Bit6 Bit5 Bit4 Bit3 Bit2 Bit1 Bit0
-+ *	byte0     |   Block id  | r/w | sub-block        |
-+ *	byte1     |		Address			 |
-+ *	byte2	  |		Data			 |
-+ *	byte3	  |		Data			 |
-+ *	byte4	  |		Data			 |
-+ *	byte5	  |		Data			 |
-+ */
-+
-+
-+
-+
-+/***************************************/
-+/* define GPIO module base address     */
-+/***************************************/
-+#define GPIO_EECS	     0x80000000		/*   EECS: GPIO[22]   */
-+#define GPIO_MOSI	     0x20000000         /*   EEDO: GPIO[29]   send to 6996*/
-+#define GPIO_MISO	     0x40000000         /*   EEDI: GPIO[30]   receive from 6996*/
-+#define GPIO_EECK	     0x10000000         /*   EECK: GPIO[31]   */
-+
-+/*************************************************************
-+* SPI protocol for ADM6996 control
-+**************************************************************/
-+#define SPI_OP_LEN	     0x08		// the length of start bit and opcode
-+#define SPI_OPWRITE	     0X05		// write
-+#define SPI_OPREAD	     0X06		// read
-+#define SPI_OPERASE	     0X07		// erase
-+#define SPI_OPWTEN	     0X04		// write enable
-+#define SPI_OPWTDIS	     0X04		// write disable
-+#define SPI_OPERSALL	     0X04		// erase all
-+#define SPI_OPWTALL	     0X04		// write all
-+
-+#define SPI_ADD_LEN	     8			// bits of Address
-+#define SPI_DAT_LEN	     32			// bits of Data
-+
-+
-+/****************************************/
-+/*	Function Declare		*/
-+/****************************************/
-+
-+//unsigned int SPI_read_bit(void);
-+//void SPI_write_bit(char bit_EEDO);
-+//unsigned int SPI_read_bit(void);
-+/******************************************
-+* SPI_write
-+* addr -> Write Address
-+* value -> value to be write
-+***************************************** */
-+void phy_receiver_init (unsigned char port_no)
-+{
-+    phy_write(port_no,31,0x2a30);
-+    phy_write_masked(port_no, 12, 0x0200, 0x0300);
-+    phy_write(port_no,31,0);
-+}
-+
-+void phy_write(unsigned char port_no,unsigned char reg,unsigned int val)
-+{
-+	unsigned int cmd;
-+
-+	cmd = (port_no<<21)|(reg<<16)|val;
-+	SPI_write(3,0,1,cmd);
-+}
-+
-+unsigned int phy_read(unsigned char port_no,unsigned char reg)
-+{
-+	unsigned int cmd,reg_val;
-+
-+	cmd = BIT(26)|(port_no<<21)|(reg<<16);
-+	SPI_write(3,0,1,cmd);
-+	msleep(2);
-+	reg_val = SPI_read(3,0,2);
-+	return reg_val;
-+}
-+
-+void phy_write_masked(unsigned char port_no,unsigned char reg,unsigned int val,unsigned int mask)
-+{
-+	unsigned int cmd,reg_val;
-+
-+	cmd = BIT(26)|(port_no<<21)|(reg<<16);	// Read reg_val
-+	SPI_write(3,0,1,cmd);
-+	mdelay(2);
-+	reg_val = SPI_read(3,0,2);
-+	reg_val &= ~mask;			// Clear masked bit
-+	reg_val |= (val&mask) ;			// set masked bit ,if true
-+	cmd = (port_no<<21)|(reg<<16)|reg_val;
-+	SPI_write(3,0,1,cmd);
-+}
-+
-+void init_seq_7385(unsigned char port_no)
-+{
-+	unsigned char rev;
-+
-+	phy_write(port_no, 31, 0x2a30);
-+	phy_write_masked(port_no, 8, 0x0200, 0x0200);
-+	phy_write(port_no, 31, 0x52b5);
-+	phy_write(port_no, 16, 0xb68a);
-+	phy_write_masked(port_no, 18, 0x0003, 0xff07);
-+	phy_write_masked(port_no, 17, 0x00a2, 0x00ff);
-+	phy_write(port_no, 16, 0x968a);
-+	phy_write(port_no, 31, 0x2a30);
-+	phy_write_masked(port_no, 8, 0x0000, 0x0200);
-+	phy_write(port_no, 31, 0x0000); /* Read revision */
-+	rev = phy_read(port_no, 3) & 0x000f;
-+	if (rev == 0)
-+	{
-+		phy_write(port_no, 31, 0x2a30);
-+		phy_write_masked(port_no, 8, 0x0200, 0x0200);
-+		phy_write(port_no, 31, 0x52b5);
-+		phy_write(port_no, 18, 0x0000);
-+		phy_write(port_no, 17, 0x0689);
-+		phy_write(port_no, 16, 0x8f92);
-+		phy_write(port_no, 31, 0x52B5);
-+		phy_write(port_no, 18, 0x0000);
-+		phy_write(port_no, 17, 0x0E35);
-+		phy_write(port_no, 16, 0x9786);
-+		phy_write(port_no, 31, 0x2a30);
-+		phy_write_masked(port_no, 8, 0x0000, 0x0200);
-+		phy_write(port_no, 23, 0xFF80);
-+		phy_write(port_no, 23, 0x0000);
-+	}
-+	phy_write(port_no, 31, 0x0000);
-+	phy_write(port_no, 18, 0x0048);
-+	if (rev == 0)
-+	{
-+		phy_write(port_no, 31, 0x2a30);
-+		phy_write(port_no, 20, 0x6600);
-+		phy_write(port_no, 31, 0x0000);
-+		phy_write(port_no, 24, 0xa24e);
-+	}
-+	else
-+	{
-+		phy_write(port_no, 31, 0x2a30);
-+		phy_write_masked(port_no, 22, 0x0240, 0x0fc0);
-+		phy_write_masked(port_no, 20, 0x4000, 0x6000);
-+		phy_write(port_no, 31, 1);
-+		phy_write_masked(port_no, 20, 0x6000, 0xe000);
-+		phy_write(port_no, 31, 0x0000);
-+	}
-+}
-+
-+int Get_Set_port_status()
-+{
-+	unsigned int    reg_val,ability,rcv_mask,mac_config;
-+	int is_link=0;
-+	int i;
-+
-+ 	rcv_mask = SPI_read(2,0,0x10);			// Receive mask
-+
-+	for(i=0;i<4;i++){
-+		reg_val = phy_read(i,1);
-+		if ((reg_val & 0x0024) == 0x0024) /* link is established and auto_negotiate process completed */
-+		{
-+			is_link=1;
-+			if(switch_pre_link[i]==LINK_DOWN){		// Link Down ==> Link up
-+
-+				rcv_mask |= BIT(i);			// Enable receive
-+
-+				reg_val = phy_read(i,10);
-+				if(reg_val & 0x0c00){
-+					printk("Port%d:Giga mode\n",i);
-+//					SPI_write(1,i,0x00,0x300701B1);
-+					mac_config = 0x00060004|(6<<6);
-+
-+					SPI_write(1,i,0x00,((mac_config & 0xfffffff8) | 1) | 0x20000030);	// reset port
-+					mac_config |= (( BIT(i) << 19) | 0x08000000);
-+					SPI_write(1,i,0x00,mac_config);
-+					SPI_write(1,i,0x04,0x000300ff);		// flow control
-+
-+					reg_val = SPI_read(5,0,0x12);
-+					reg_val &= ~BIT(i);
-+					SPI_write(5,0,0x12,reg_val);
-+
-+					reg_val = SPI_read(1,i,0x00);
-+					reg_val |= 0x10010000;
-+					SPI_write(1,i,0x00,reg_val);
-+//					SPI_write(1,i,0x00,0x10070181);
-+					switch_pre_link[i]=LINK_UP;
-+					switch_pre_speed[i]=GMAC_SPEED_1000;
-+				}
-+				else{
-+					reg_val = phy_read(i,5);
-+					ability = (reg_val&0x5e0) >>5;
-+					if ((ability & 0x0C)) /* 100M */
-+					{
-+//						SPI_write(1,i,0x00,0x30050472);
-+						if((ability&0x08)==0) 		// Half
-+							mac_config = 0x00040004 |(17<<6);
-+						else				// Full
-+							mac_config = 0x00040004 |(17<<6);
-+
-+						SPI_write(1,i,0x00,((mac_config & 0xfffffff8) | 1) | 0x20000030);	// reset port
-+						mac_config |= (( BIT(i) << 19) | 0x08000000);
-+						SPI_write(1,i,0x00,mac_config);
-+						SPI_write(1,i,0x04,0x000300ff);		// flow control
-+
-+						reg_val = SPI_read(5,0,0x12);
-+						reg_val &= ~BIT(i);
-+						SPI_write(5,0,0x12,reg_val);
-+
-+						reg_val = SPI_read(1,i,0x00);
-+						reg_val &= ~0x08000000;
-+						reg_val |= 0x10010000;
-+						SPI_write(1,i,0x00,reg_val);
-+//						SPI_write(1,i,0x00,0x10050442);
-+						printk("Port%d:100M\n",i);
-+						switch_pre_link[i]=LINK_UP;
-+						switch_pre_speed[i]=GMAC_SPEED_100;
-+					}
-+					else if((ability & 0x03)) /* 10M */
-+					{
-+//						SPI_write(1,i,0x00,0x30050473);
-+						if((ability&0x2)==0)		// Half
-+							mac_config = 0x00040004 |(17<<6);
-+						else				// Full
-+							mac_config = 0x00040004 |(17<<6);
-+
-+						SPI_write(1,i,0x00,((mac_config & 0xfffffff8) | 1) | 0x20000030);	// reset port
-+						mac_config |= (( BIT(i) << 19) | 0x08000000);
-+						SPI_write(1,i,0x00,mac_config);
-+						SPI_write(1,i,0x04,0x000300ff);		// flow control
-+
-+						reg_val = SPI_read(5,0,0x12);
-+						reg_val &= ~BIT(i);
-+						SPI_write(5,0,0x12,reg_val);
-+
-+						reg_val = SPI_read(1,i,0x00);
-+						reg_val &= ~0x08000000;
-+						reg_val |= 0x10010000;
-+						SPI_write(1,i,0x00,reg_val);
-+//						SPI_write(1,i,0x00,0x10050443);
-+						printk("Port%d:10M\n",i);
-+						switch_pre_link[i]=LINK_UP;
-+						switch_pre_speed[i]=GMAC_SPEED_10;
-+					}
-+					else{
-+						SPI_write(1,i,0x00,0x20000030);
-+						printk("Port%d:Unknown mode\n",i);
-+						switch_pre_link[i]=LINK_DOWN;
-+						switch_pre_speed[i]=GMAC_SPEED_10;
-+					}
-+				}
-+			}
-+			else{						// Link up ==> Link UP
-+
-+			}
-+		}
-+		else{							// Link Down
-+			if(switch_pre_link[i]==LINK_UP){
-+				printk("Port%d:Link Down\n",i);
-+				//phy_receiver_init(i);
-+				reg_val = SPI_read(1,i,0);
-+				reg_val &= ~BIT(16);
-+				SPI_write(1,i,0x00,reg_val);			// disable RX
-+				SPI_write(5,0,0x0E,BIT(i));			// dicard packet
-+				while((SPI_read(5,0,0x0C)&BIT(i))==0)		// wait to be empty
-+					msleep(1);
-+				SPI_write(1,i,0x00,0x20000030);			// PORT_RST
-+				SPI_write(5,0,0x0E,SPI_read(5,0,0x0E) & ~BIT(i));// accept packet
-+
-+				reg_val = SPI_read(5,0,0x12);
-+				reg_val |= BIT(i);
-+				SPI_write(5,0,0x12,reg_val);
-+			}
-+			switch_pre_link[i]=LINK_DOWN;
-+			rcv_mask &= ~BIT(i);			// disable receive
-+		}
-+	}
-+
-+	SPI_write(2,0,0x10,rcv_mask);			// Receive mask
-+	return is_link;
-+
-+}
-+EXPORT_SYMBOL(Get_Set_port_status);
-+
-+void SPI_write(unsigned char block,unsigned char subblock,unsigned char addr,unsigned int value)
-+{
-+	int     i;
-+	char    bit;
-+	unsigned int data;
-+
-+	SPI_CS_enable(1);
-+
-+	data = (block<<5) | 0x10 | subblock;
-+
-+	//send write command
-+	for(i=SPI_OP_LEN-1;i>=0;i--)
-+	{
-+		bit = (data>>i)& 0x01;
-+		SPI_write_bit(bit);
-+	}
-+
-+	// send 8 bits address (MSB first, LSB last)
-+	for(i=SPI_ADD_LEN-1;i>=0;i--)
-+	{
-+		bit = (addr>>i)& 0x01;
-+		SPI_write_bit(bit);
-+	}
-+	// send 32 bits data (MSB first, LSB last)
-+	for(i=SPI_DAT_LEN-1;i>=0;i--)
-+	{
-+		bit = (value>>i)& 0x01;
-+		SPI_write_bit(bit);
-+	}
-+
-+	SPI_CS_enable(0);	// CS low
-+
-+}
-+
-+
-+/************************************
-+* SPI_write_bit
-+* bit_EEDO -> 1 or 0 to be written
-+************************************/
-+void SPI_write_bit(char bit_EEDO)
-+{
-+	unsigned int addr;
-+	unsigned int value;
-+
-+	addr = (GPIO_BASE_ADDR1 + GPIO_PIN_DIR);
-+	value = readl(addr) |GPIO_EECK |GPIO_MOSI ;   /* set EECK/MISO Pin to output */
-+	writel(value,addr);
-+	if(bit_EEDO)
-+	{
-+		addr = (GPIO_BASE_ADDR1 + GPIO_DATA_SET);
-+		writel(GPIO_MOSI,addr); /* set MISO to 1 */
-+
-+	}
-+	else
-+	{
-+		addr = (GPIO_BASE_ADDR1 + GPIO_DATA_CLEAR);
-+		writel(GPIO_MOSI,addr); /* set MISO to 0 */
-+	}
-+	addr = (GPIO_BASE_ADDR1 + GPIO_DATA_SET);
-+	writel(GPIO_EECK,addr); /* set EECK to 1 */
-+	addr = (GPIO_BASE_ADDR1 + GPIO_DATA_CLEAR);
-+	writel(GPIO_EECK,addr); /* set EECK to 0 */
-+
-+	//return ;
-+}
-+
-+/**********************************************************************
-+* read a bit from ADM6996 register
-+***********************************************************************/
-+unsigned int SPI_read_bit(void) // read data from
-+{
-+	unsigned int addr;
-+	unsigned int value;
-+
-+	addr = (GPIO_BASE_ADDR1 + GPIO_PIN_DIR);
-+	value = readl(addr) & (~GPIO_MISO);   // set EECK to output and MISO to input
-+	writel(value,addr);
-+
-+	addr =(GPIO_BASE_ADDR1 + GPIO_DATA_SET);
-+	writel(GPIO_EECK,addr); // set EECK to 1
-+
-+
-+	addr = (GPIO_BASE_ADDR1 + GPIO_DATA_IN);
-+	value = readl(addr) ;
-+
-+	addr = (GPIO_BASE_ADDR1 + GPIO_DATA_CLEAR);
-+	writel(GPIO_EECK,addr); // set EECK to 0
-+
-+
-+	value = value >> 30;
-+	return value ;
-+}
-+
-+/******************************************
-+* SPI_default
-+* EEPROM content default value
-+*******************************************/
-+int SPI_default(void)
-+{
-+	int i;
-+	unsigned reg_val,cmd;
-+
-+#if 0
-+	SPI_write(7,0,0x1C,0x01);				// map code space to 0
-+
-+	reg_val = SPI_read(7,0,0x10);
-+	reg_val |= 0x0146;
-+	reg_val &= ~0x0001;
-+	SPI_write(7,0,0x10,reg_val);				// reset iCPU and enable ext_access
-+	SPI_write(7,0,0x11,0x0000);				// start address
-+	for(i=0;i which table to be read: 1/count  0/EEPROM
-+* addr  -> Address to be read
-+* return : Value of the register
-+*************************************************/
-+unsigned int SPI_read(unsigned char block,unsigned char subblock,unsigned char addr)
-+{
-+	int     i;
-+	char    bit;
-+	unsigned int data,value=0;
-+
-+	SPI_CS_enable(1);
-+
-+	data = (block<<5) | subblock;
-+
-+	//send write command
-+	for(i=SPI_OP_LEN-1;i>=0;i--)
-+	{
-+		bit = (data>>i)& 0x01;
-+		SPI_write_bit(bit);
-+	}
-+
-+	// send 8 bits address (MSB first, LSB last)
-+	for(i=SPI_ADD_LEN-1;i>=0;i--)
-+	{
-+		bit = (addr>>i)& 0x01;
-+		SPI_write_bit(bit);
-+	}
-+
-+	// dummy read for chip ready
-+	for(i=0;i<8;i++)
-+		SPI_read_bit();
-+
-+
-+	// read 32 bits data (MSB first, LSB last)
-+	for(i=SPI_DAT_LEN-1;i>=0;i--)
-+	{
-+		bit = SPI_read_bit();
-+		value |= bit<
-+
-+#define SL351x_GMAC_WORKAROUND		1
-+
-+#undef BIG_ENDIAN
-+#define BIG_ENDIAN  				0
-+#define GMAC_DEBUG      			1
-+#define GMAC_NUM					2
-+//#define	L2_jumbo_frame				1
-+
-+#define _PACKED_					__attribute__ ((aligned(1), packed))
-+
-+#ifndef BIT
-+#define BIT(x)						(1 << (x))
-+#endif
-+
-+#define REG32(addr)     			(*(volatile unsigned long  * const)(addr))
-+
-+#define DMA_MALLOC(size,handle)		pci_alloc_consistent(NULL,size,handle)
-+#define DMA_MFREE(mem,size,handle)	pci_free_consistent(NULL,size,mem,handle)
-+
-+// Define frame size
-+#define ETHER_ADDR_LEN				6
-+#define GMAC_MAX_ETH_FRAME_SIZE		1514
-+#define GMAC_TX_BUF_SIZE			((GMAC_MAX_ETH_FRAME_SIZE + 31) & (~31))
-+#define MAX_ISR_WORK        		20
-+
-+#ifdef	L2_jumbo_frame
-+#define SW_RX_BUF_SIZE				9234	// 2048 ,9234
-+#else
-+#define SW_RX_BUF_SIZE				1536	// 2048
-+#endif
-+
-+#define HW_RX_BUF_SIZE				1536	// 2048
-+
-+#define GMAC_DEV_TX_TIMEOUT  		(10*HZ)			//add by CH
-+#define	SKB_RESERVE_BYTES			16
-+
-+/**********************************************************************
-+ * Base Register
-+ **********************************************************************/
-+#define TOE_BASE					(IO_ADDRESS(SL2312_TOE_BASE))
-+#define GMAC_GLOBAL_BASE_ADDR       (IO_ADDRESS(SL2312_GLOBAL_BASE))
-+
-+#define TOE_GLOBAL_BASE				(TOE_BASE + 0x0000)
-+#define TOE_NONTOE_QUE_HDR_BASE		(TOE_BASE + 0x2000)
-+#define TOE_TOE_QUE_HDR_BASE		(TOE_BASE + 0x3000)
-+#define TOE_V_BIT_BASE				(TOE_BASE + 0x4000)
-+#define TOE_A_BIT_BASE				(TOE_BASE + 0x6000)
-+#define TOE_GMAC0_DMA_BASE			(TOE_BASE + 0x8000)
-+#define TOE_GMAC0_BASE				(TOE_BASE + 0xA000)
-+#define TOE_GMAC1_DMA_BASE			(TOE_BASE + 0xC000)
-+#define TOE_GMAC1_BASE				(TOE_BASE + 0xE000)
-+
-+/**********************************************************************
-+ * Queue ID
-+ **********************************************************************/
-+#define TOE_SW_FREE_QID				0x00
-+#define TOE_HW_FREE_QID				0x01
-+#define TOE_GMAC0_SW_TXQ0_QID		0x02
-+#define TOE_GMAC0_SW_TXQ1_QID		0x03
-+#define TOE_GMAC0_SW_TXQ2_QID		0x04
-+#define TOE_GMAC0_SW_TXQ3_QID		0x05
-+#define TOE_GMAC0_SW_TXQ4_QID		0x06
-+#define TOE_GMAC0_SW_TXQ5_QID		0x07
-+#define TOE_GMAC0_HW_TXQ0_QID		0x08
-+#define TOE_GMAC0_HW_TXQ1_QID		0x09
-+#define TOE_GMAC0_HW_TXQ2_QID		0x0A
-+#define TOE_GMAC0_HW_TXQ3_QID		0x0B
-+#define TOE_GMAC1_SW_TXQ0_QID		0x12
-+#define TOE_GMAC1_SW_TXQ1_QID		0x13
-+#define TOE_GMAC1_SW_TXQ2_QID		0x14
-+#define TOE_GMAC1_SW_TXQ3_QID		0x15
-+#define TOE_GMAC1_SW_TXQ4_QID		0x16
-+#define TOE_GMAC1_SW_TXQ5_QID		0x17
-+#define TOE_GMAC1_HW_TXQ0_QID		0x18
-+#define TOE_GMAC1_HW_TXQ1_QID		0x19
-+#define TOE_GMAC1_HW_TXQ2_QID		0x1A
-+#define TOE_GMAC1_HW_TXQ3_QID		0x1B
-+#define TOE_GMAC0_DEFAULT_QID		0x20
-+#define TOE_GMAC1_DEFAULT_QID		0x21
-+#define TOE_CLASSIFICATION_QID(x)	(0x22 + x)	// 0x22 ~ 0x2F
-+#define TOE_TOE_QID(x)				(0x40 + x)	// 0x40 ~ 0x7F
-+
-+/**********************************************************************
-+ * TOE DMA Queue Number should be 2^n, n = 6...12
-+ * TOE DMA Queues are the following queue types:
-+ *		SW Free Queue, HW Free Queue,
-+ *		GMAC 0/1 SW TX Q0-5, and GMAC 0/1 HW TX Q0-5
-+ * They have same descriptor numbers.
-+ * The base address and descriptor number are configured at
-+ * DMA Queues Descriptor Ring Base Address/Size Register (offset 0x0004)
-+ **********************************************************************/
-+#define TOE_SW_FREEQ_DESC_POWER		10
-+#define TOE_SW_FREEQ_DESC_NUM		(1<y) ? x :y)
-+#define TX_DESC_NUM					_max(TOE_GMAC0_SWTXQ_DESC_NUM, TOE_GMAC1_SWTXQ_DESC_NUM)
-+
-+#define RWPTR_ADVANCE_ONE(x, max)	((x == (max -1)) ? 0 : x+1)
-+#define RWPTR_RECEDE_ONE(x, max)	((x == 0) ? (max -1) : x-1)
-+#define SET_WPTR(addr, data)		(*(volatile u16 * const)((u32)(addr)+2) = (u16)data)
-+#define SET_RPTR(addr, data)		(*(volatile u16 * const)((u32)(addr)) = (u16)data)
-+
-+/**********************************************************************
-+ * Global registers
-+ * #define TOE_GLOBAL_BASE			(TOE_BASE + 0x0000)
-+ * Base 0x60000000
-+ **********************************************************************/
-+#define GLOBAL_TOE_VERSION_REG			0x0000
-+#define GLOBAL_SW_FREEQ_BASE_SIZE_REG	0x0004
-+#define GLOBAL_HW_FREEQ_BASE_SIZE_REG	0x0008
-+#define GLOBAL_DMA_SKB_SIZE_REG			0x0010
-+#define GLOBAL_SWFQ_RWPTR_REG			0x0014
-+#define GLOBAL_HWFQ_RWPTR_REG			0x0018
-+#define GLOBAL_INTERRUPT_STATUS_0_REG	0x0020
-+#define GLOBAL_INTERRUPT_ENABLE_0_REG	0x0024
-+#define GLOBAL_INTERRUPT_SELECT_0_REG	0x0028
-+#define GLOBAL_INTERRUPT_STATUS_1_REG	0x0030
-+#define GLOBAL_INTERRUPT_ENABLE_1_REG	0x0034
-+#define GLOBAL_INTERRUPT_SELECT_1_REG	0x0038
-+#define GLOBAL_INTERRUPT_STATUS_2_REG	0x0040
-+#define GLOBAL_INTERRUPT_ENABLE_2_REG	0x0044
-+#define GLOBAL_INTERRUPT_SELECT_2_REG	0x0048
-+#define GLOBAL_INTERRUPT_STATUS_3_REG	0x0050
-+#define GLOBAL_INTERRUPT_ENABLE_3_REG	0x0054
-+#define GLOBAL_INTERRUPT_SELECT_3_REG	0x0058
-+#define GLOBAL_INTERRUPT_STATUS_4_REG	0x0060
-+#define GLOBAL_INTERRUPT_ENABLE_4_REG	0x0064
-+#define GLOBAL_INTERRUPT_SELECT_4_REG	0x0068
-+#define GLOBAL_HASH_TABLE_BASE_REG		0x006C
-+#define GLOBAL_QUEUE_THRESHOLD_REG		0x0070
-+
-+/**********************************************************************
-+ * GMAC 0/1 DMA/TOE register
-+ * #define TOE_GMAC0_DMA_BASE		(TOE_BASE + 0x8000)
-+ * #define TOE_GMAC1_DMA_BASE		(TOE_BASE + 0xC000)
-+ * Base 0x60008000 or 0x6000C000
-+ **********************************************************************/
-+#define GMAC_DMA_CTRL_REG				0x0000
-+#define GMAC_TX_WEIGHTING_CTRL_0_REG	0x0004
-+#define GMAC_TX_WEIGHTING_CTRL_1_REG	0x0008
-+#define GMAC_SW_TX_QUEUE0_PTR_REG		0x000C
-+#define GMAC_SW_TX_QUEUE1_PTR_REG		0x0010
-+#define GMAC_SW_TX_QUEUE2_PTR_REG		0x0014
-+#define GMAC_SW_TX_QUEUE3_PTR_REG		0x0018
-+#define GMAC_SW_TX_QUEUE4_PTR_REG		0x001C
-+#define GMAC_SW_TX_QUEUE5_PTR_REG		0x0020
-+#define GMAC_HW_TX_QUEUE0_PTR_REG		0x0024
-+#define GMAC_HW_TX_QUEUE1_PTR_REG		0x0028
-+#define GMAC_HW_TX_QUEUE2_PTR_REG		0x002C
-+#define GMAC_HW_TX_QUEUE3_PTR_REG		0x0030
-+#define GMAC_DMA_TX_FIRST_DESC_REG		0x0038
-+#define GMAC_DMA_TX_CURR_DESC_REG		0x003C
-+#define GMAC_DMA_TX_DESC_WORD0_REG		0x0040
-+#define GMAC_DMA_TX_DESC_WORD1_REG		0x0044
-+#define GMAC_DMA_TX_DESC_WORD2_REG		0x0048
-+#define GMAC_DMA_TX_DESC_WORD3_REG		0x004C
-+#define GMAC_SW_TX_QUEUE_BASE_REG		0x0050
-+#define GMAC_HW_TX_QUEUE_BASE_REG		0x0054
-+#define GMAC_DMA_RX_FIRST_DESC_REG		0x0058
-+#define GMAC_DMA_RX_CURR_DESC_REG		0x005C
-+#define GMAC_DMA_RX_DESC_WORD0_REG		0x0060
-+#define GMAC_DMA_RX_DESC_WORD1_REG		0x0064
-+#define GMAC_DMA_RX_DESC_WORD2_REG		0x0068
-+#define GMAC_DMA_RX_DESC_WORD3_REG		0x006C
-+#define GMAC_HASH_ENGINE_REG0			0x0070
-+#define GMAC_HASH_ENGINE_REG1			0x0074
-+#define GMAC_MR0CR0						0x0078 	// matching rule 0 Control register 0
-+#define GMAC_MR0CR1						0x007C	// matching rule 0 Control register 1
-+#define GMAC_MR0CR2						0x0080	// matching rule 0 Control register 2
-+#define GMAC_MR1CR0						0x0084	// matching rule 1 Control register 0
-+#define GMAC_MR1CR1						0x0088	// matching rule 1 Control register 1
-+#define GMAC_MR1CR2						0x008C	// matching rule 1 Control register 2
-+#define GMAC_MR2CR0						0x0090	// matching rule 2 Control register 0
-+#define GMAC_MR2CR1						0x0094	// matching rule 2 Control register 1
-+#define GMAC_MR2CR2						0x0098	// matching rule 2 Control register 2
-+#define GMAC_MR3CR0						0x009C	// matching rule 3 Control register 0
-+#define GMAC_MR3CR1						0x00A0	// matching rule 3 Control register 1
-+#define GMAC_MR3CR2						0x00A4	// matching rule 3 Control register 2
-+#define GMAC_SPR0						0x00A8	// Support Protocol Regsister 0
-+#define GMAC_SPR1						0x00AC	// Support Protocol Regsister 1
-+#define GMAC_SPR2						0x00B0	// Support Protocol Regsister 2
-+#define GMAC_SPR3						0x00B4	// Support Protocol Regsister 3
-+#define GMAC_SPR4						0x00B8	// Support Protocol Regsister 4
-+#define GMAC_SPR5						0x00BC	// Support Protocol Regsister 5
-+#define GMAC_SPR6						0x00C0	// Support Protocol Regsister 6
-+#define GMAC_SPR7						0x00C4	// Support Protocol Regsister 7
-+#define GMAC_AHB_WEIGHT_REG				0x00C8	// GMAC Hash/Rx/Tx AHB Weighting register
-+
-+/**********************************************************************
-+ * TOE GMAC 0/1 register
-+ * #define TOE_GMAC0_BASE				(TOE_BASE + 0xA000)
-+ * #define TOE_GMAC1_BASE				(TOE_BASE + 0xE000)
-+ * Base 0x6000A000 or 0x6000E000
-+ **********************************************************************/
-+enum GMAC_REGISTER {
-+	GMAC_STA_ADD0 	= 0x0000,
-+	GMAC_STA_ADD1	= 0x0004,
-+	GMAC_STA_ADD2	= 0x0008,
-+	GMAC_RX_FLTR	= 0x000c,
-+	GMAC_MCAST_FIL0 = 0x0010,
-+	GMAC_MCAST_FIL1 = 0x0014,
-+	GMAC_CONFIG0	= 0x0018,
-+	GMAC_CONFIG1	= 0x001c,
-+	GMAC_CONFIG2	= 0x0020,
-+	GMAC_CONFIG3	= 0x0024,
-+	GMAC_RESERVED	= 0x0028,
-+	GMAC_STATUS		= 0x002c,
-+	GMAC_IN_DISCARDS= 0x0030,
-+	GMAC_IN_ERRORS  = 0x0034,
-+	GMAC_IN_MCAST   = 0x0038,
-+	GMAC_IN_BCAST   = 0x003c,
-+	GMAC_IN_MAC1    = 0x0040,	// for STA 1 MAC Address
-+	GMAC_IN_MAC2    = 0x0044	// for STA 2 MAC Address
-+};
-+/**********************************************************************
-+ * TOE version Register (offset 0x0000)
-+ **********************************************************************/
-+typedef union
-+{
-+	unsigned int bits32;
-+	struct bit
-+	{
-+#if (BIG_ENDIAN==1)
-+
-+		unsigned int reserved		: 15;	// bit 31:17
-+		unsigned int v_bit_mode		: 1;	// bit 16		1: 128-entry
-+		unsigned int device_id		: 12;	// bit 15:4 	Device ID
-+		unsigned int revision_id	: 4;	// bit  3:0 	Revision ID
-+#else
-+		unsigned int revision_id	: 4;	// bit  3:0 	Revision ID
-+		unsigned int device_id		: 12;	// bit 15:4 	Device ID
-+		unsigned int v_bit_mode		: 1;	// bit 16		1: 128-entry
-+		unsigned int reserved		: 15;	// bit 31:17
-+#endif
-+	} bits;
-+} TOE_VERSION_T;
-+
-+
-+/**********************************************************************
-+ * DMA Queues description Ring Base Address/Size Register (offset 0x0004)
-+ **********************************************************************/
-+typedef union
-+{
-+	unsigned int bits32;
-+	unsigned int base_size;
-+} DMA_Q_BASE_SIZE_T;
-+#define DMA_Q_BASE_MASK 	(~0x0f)
-+
-+/**********************************************************************
-+ * DMA SKB Buffer register (offset 0x0008)
-+ **********************************************************************/
-+typedef union
-+{
-+	unsigned int bits32;
-+	struct bit_0008
-+	{
-+#if (BIG_ENDIAN==1)
-+
-+		unsigned int hw_skb_size	: 16;	// bit 31:16	HW Free poll SKB Size
-+		unsigned int sw_skb_size	: 16;	// bit 15:0 	SW Free poll SKB Size
-+#else
-+		unsigned int sw_skb_size	: 16;	// bit 15:0 	SW Free poll SKB Size
-+		unsigned int hw_skb_size	: 16;	// bit 31:16	HW Free poll SKB Size
-+#endif
-+	} bits;
-+} DMA_SKB_SIZE_T;
-+
-+/**********************************************************************
-+ * DMA SW Free Queue Read/Write Pointer Register (offset 0x000C)
-+ **********************************************************************/
-+typedef union
-+{
-+	unsigned int bits32;
-+	struct bit_000c
-+	{
-+#if (BIG_ENDIAN==1)
-+
-+		unsigned int wptr			: 16;	// bit 31:16 	Write Ptr, RW
-+		unsigned int rptr			: 16;	// bit 15:0		Read Ptr, RO
-+#else
-+		unsigned int rptr			: 16;	// bit 15:0		Read Ptr, RO
-+		unsigned int wptr			: 16;	// bit 31:16 	Write Ptr, RW
-+#endif
-+	} bits;
-+} DMA_RWPTR_T;
-+
-+/**********************************************************************
-+ * DMA HW Free Queue Read/Write Pointer Register (offset 0x0010)
-+ **********************************************************************/
-+// see DMA_RWPTR_T structure
-+
-+/**********************************************************************
-+ * Interrupt Status Register 0 	(offset 0x0020)
-+ * Interrupt Mask Register 0 	(offset 0x0024)
-+ * Interrupt Select Register 0 	(offset 0x0028)
-+ **********************************************************************/
-+typedef union
-+{
-+	unsigned int bits32;
-+	struct bit_0020
-+	{
-+#if (BIG_ENDIAN==1)
-+		unsigned int txDerr1		: 1;	// bit 31	GMAC1 AHB Bus Error while Tx
-+		unsigned int txPerr1		: 1;	// bit 30	GMAC1 Tx Descriptor Protocol Error
-+		unsigned int txDerr0		: 1;	// bit 29	GMAC0 AHB Bus Error while Tx
-+		unsigned int txPerr0		: 1;	// bit 28	GMAC0 Tx Descriptor Protocol Error
-+		unsigned int rxDerr1		: 1;	// bit 27	GMAC1 AHB Bus Error while Rx
-+		unsigned int rxPerr1		: 1;	// bit 26	GMAC1 Rx Descriptor Protocol Error
-+		unsigned int rxDerr0		: 1;	// bit 25	GMAC0 AHB Bus Error while Rx
-+		unsigned int rxPerr0		: 1;	// bit 24	GMAC0 Rx Descriptor Protocol Error
-+		unsigned int swtq15_fin		: 1;	// bit 23	GMAC1 SW Tx Queue 5 Finish Interrupt
-+		unsigned int swtq14_fin		: 1;	// bit 22	GMAC1 SW Tx Queue 4 Finish Interrupt
-+		unsigned int swtq13_fin		: 1;	// bit 21	GMAC1 SW Tx Queue 3 Finish Interrupt
-+		unsigned int swtq12_fin		: 1;	// bit 20	GMAC1 SW Tx Queue 2 Finish Interrupt
-+		unsigned int swtq11_fin		: 1;	// bit 19	GMAC1 SW Tx Queue 1 Finish Interrupt
-+		unsigned int swtq10_fin		: 1;	// bit 18	GMAC1 SW Tx Queue 0 Finish Interrupt
-+		unsigned int swtq05_fin		: 1;	// bit 17	GMAC0 SW Tx Queue 5 Finish Interrupt
-+		unsigned int swtq04_fin		: 1;	// bit 16	GMAC0 SW Tx Queue 4 Finish Interrupt
-+		unsigned int swtq03_fin		: 1;	// bit 15	GMAC0 SW Tx Queue 3 Finish Interrupt
-+		unsigned int swtq02_fin		: 1;	// bit 14	GMAC0 SW Tx Queue 2 Finish Interrupt
-+		unsigned int swtq01_fin		: 1;	// bit 13	GMAC0 SW Tx Queue 1 Finish Interrupt
-+		unsigned int swtq00_fin		: 1;	// bit 12	GMAC0 SW Tx Queue 0 Finish Interrupt
-+		unsigned int swtq15_eof		: 1;	// bit 11	GMAC1 SW Tx Queue 5 EOF Interrupt
-+		unsigned int swtq14_eof		: 1;	// bit 10	GMAC1 SW Tx Queue 4 EOF Interrupt
-+		unsigned int swtq13_eof		: 1;	// bit 9	GMAC1 SW Tx Queue 3 EOF Interrupt
-+		unsigned int swtq12_eof		: 1;	// bit 8	GMAC1 SW Tx Queue 2 EOF Interrupt
-+		unsigned int swtq11_eof		: 1;	// bit 7	GMAC1 SW Tx Queue 1 EOF Interrupt
-+		unsigned int swtq10_eof		: 1;	// bit 6	GMAC1 SW Tx Queue 0 EOF Interrupt
-+		unsigned int swtq05_eof		: 1;	// bit 5	GMAC0 SW Tx Queue 5 EOF Interrupt
-+		unsigned int swtq04_eof		: 1;	// bit 4	GMAC0 SW Tx Queue 4 EOF Interrupt
-+		unsigned int swtq03_eof		: 1;	// bit 3	GMAC0 SW Tx Queue 3 EOF Interrupt
-+		unsigned int swtq02_eof		: 1;	// bit 2	GMAC0 SW Tx Queue 2 EOF Interrupt
-+		unsigned int swtq01_eof		: 1;	// bit 1	GMAC0 SW Tx Queue 1 EOF Interrupt
-+		unsigned int swtq00_eof		: 1;	// bit 0	GMAC0 SW Tx Queue 0 EOF Interrupt
-+#else
-+		unsigned int swtq00_eof		: 1;	// bit 0	GMAC0 SW Tx Queue 0 EOF Interrupt
-+		unsigned int swtq01_eof		: 1;	// bit 1	GMAC0 SW Tx Queue 1 EOF Interrupt
-+		unsigned int swtq02_eof		: 1;	// bit 2	GMAC0 SW Tx Queue 2 EOF Interrupt
-+		unsigned int swtq03_eof		: 1;	// bit 3	GMAC0 SW Tx Queue 3 EOF Interrupt
-+		unsigned int swtq04_eof		: 1;	// bit 4	GMAC0 SW Tx Queue 4 EOF Interrupt
-+		unsigned int swtq05_eof		: 1;	// bit 5	GMAC0 SW Tx Queue 5 EOF Interrupt
-+		unsigned int swtq10_eof		: 1;	// bit 6	GMAC1 SW Tx Queue 0 EOF Interrupt
-+		unsigned int swtq11_eof		: 1;	// bit 7	GMAC1 SW Tx Queue 1 EOF Interrupt
-+		unsigned int swtq12_eof		: 1;	// bit 8	GMAC1 SW Tx Queue 2 EOF Interrupt
-+		unsigned int swtq13_eof		: 1;	// bit 9	GMAC1 SW Tx Queue 3 EOF Interrupt
-+		unsigned int swtq14_eof		: 1;	// bit 10	GMAC1 SW Tx Queue 4 EOF Interrupt
-+		unsigned int swtq15_eof		: 1;	// bit 11	GMAC1 SW Tx Queue 5 EOF Interrupt
-+		unsigned int swtq00_fin		: 1;	// bit 12	GMAC0 SW Tx Queue 0 Finish Interrupt
-+		unsigned int swtq01_fin		: 1;	// bit 13	GMAC0 SW Tx Queue 1 Finish Interrupt
-+		unsigned int swtq02_fin		: 1;	// bit 14	GMAC0 SW Tx Queue 2 Finish Interrupt
-+		unsigned int swtq03_fin		: 1;	// bit 15	GMAC0 SW Tx Queue 3 Finish Interrupt
-+		unsigned int swtq04_fin		: 1;	// bit 16	GMAC0 SW Tx Queue 4 Finish Interrupt
-+		unsigned int swtq05_fin		: 1;	// bit 17	GMAC0 SW Tx Queue 5 Finish Interrupt
-+		unsigned int swtq10_fin		: 1;	// bit 18	GMAC1 SW Tx Queue 0 Finish Interrupt
-+		unsigned int swtq11_fin		: 1;	// bit 19	GMAC1 SW Tx Queue 1 Finish Interrupt
-+		unsigned int swtq12_fin		: 1;	// bit 20	GMAC1 SW Tx Queue 2 Finish Interrupt
-+		unsigned int swtq13_fin		: 1;	// bit 21	GMAC1 SW Tx Queue 3 Finish Interrupt
-+		unsigned int swtq14_fin		: 1;	// bit 22	GMAC1 SW Tx Queue 4 Finish Interrupt
-+		unsigned int swtq15_fin		: 1;	// bit 23	GMAC1 SW Tx Queue 5 Finish Interrupt
-+		unsigned int rxPerr0		: 1;	// bit 24	GMAC0 Rx Descriptor Protocol Error
-+		unsigned int rxDerr0		: 1;	// bit 25	GMAC0 AHB Bus Error while Rx
-+		unsigned int rxPerr1		: 1;	// bit 26	GMAC1 Rx Descriptor Protocol Error
-+		unsigned int rxDerr1		: 1;	// bit 27	GMAC1 AHB Bus Error while Rx
-+		unsigned int txPerr0		: 1;	// bit 28	GMAC0 Tx Descriptor Protocol Error
-+		unsigned int txDerr0		: 1;	// bit 29	GMAC0 AHB Bus Error while Tx
-+		unsigned int txPerr1		: 1;	// bit 30	GMAC1 Tx Descriptor Protocol Error
-+		unsigned int txDerr1		: 1;	// bit 31	GMAC1 AHB Bus Error while Tx
-+#endif
-+	} bits;
-+} INTR_REG0_T;
-+
-+#define GMAC1_TXDERR_INT_BIT		BIT(31)
-+#define GMAC1_TXPERR_INT_BIT		BIT(30)
-+#define GMAC0_TXDERR_INT_BIT		BIT(29)
-+#define GMAC0_TXPERR_INT_BIT		BIT(28)
-+#define GMAC1_RXDERR_INT_BIT		BIT(27)
-+#define GMAC1_RXPERR_INT_BIT		BIT(26)
-+#define GMAC0_RXDERR_INT_BIT		BIT(25)
-+#define GMAC0_RXPERR_INT_BIT		BIT(24)
-+#define GMAC1_SWTQ15_FIN_INT_BIT	BIT(23)
-+#define GMAC1_SWTQ14_FIN_INT_BIT	BIT(22)
-+#define GMAC1_SWTQ13_FIN_INT_BIT	BIT(21)
-+#define GMAC1_SWTQ12_FIN_INT_BIT	BIT(20)
-+#define GMAC1_SWTQ11_FIN_INT_BIT	BIT(19)
-+#define GMAC1_SWTQ10_FIN_INT_BIT	BIT(18)
-+#define GMAC0_SWTQ05_FIN_INT_BIT	BIT(17)
-+#define GMAC0_SWTQ04_FIN_INT_BIT	BIT(16)
-+#define GMAC0_SWTQ03_FIN_INT_BIT	BIT(15)
-+#define GMAC0_SWTQ02_FIN_INT_BIT	BIT(14)
-+#define GMAC0_SWTQ01_FIN_INT_BIT	BIT(13)
-+#define GMAC0_SWTQ00_FIN_INT_BIT	BIT(12)
-+#define GMAC1_SWTQ15_EOF_INT_BIT	BIT(11)
-+#define GMAC1_SWTQ14_EOF_INT_BIT	BIT(10)
-+#define GMAC1_SWTQ13_EOF_INT_BIT	BIT(9)
-+#define GMAC1_SWTQ12_EOF_INT_BIT	BIT(8)
-+#define GMAC1_SWTQ11_EOF_INT_BIT	BIT(7)
-+#define GMAC1_SWTQ10_EOF_INT_BIT	BIT(6)
-+#define GMAC0_SWTQ05_EOF_INT_BIT	BIT(5)
-+#define GMAC0_SWTQ04_EOF_INT_BIT	BIT(4)
-+#define GMAC0_SWTQ03_EOF_INT_BIT	BIT(3)
-+#define GMAC0_SWTQ02_EOF_INT_BIT	BIT(2)
-+#define GMAC0_SWTQ01_EOF_INT_BIT	BIT(1)
-+#define GMAC0_SWTQ00_EOF_INT_BIT	BIT(0)
-+
-+
-+/**********************************************************************
-+ * Interrupt Status Register 1 	(offset 0x0030)
-+ * Interrupt Mask Register 1 	(offset 0x0034)
-+ * Interrupt Select Register 1 	(offset 0x0038)
-+ **********************************************************************/
-+typedef union
-+{
-+	unsigned int bits32;
-+	struct bit_0030
-+	{
-+#if (BIG_ENDIAN==1)
-+		unsigned int toe_iq3_full	: 1;	// bit 31	TOE Interrupt Queue 3 Full Interrupt
-+		unsigned int toe_iq2_full	: 1;	// bit 30	TOE Interrupt Queue 2 Full Interrupt
-+		unsigned int toe_iq1_full	: 1;	// bit 29	TOE Interrupt Queue 1 Full Interrupt
-+		unsigned int toe_iq0_full	: 1;	// bit 28	TOE Interrupt Queue 0 Full Interrupt
-+		unsigned int toe_iq3_intr	: 1;	// bit 27	TOE Interrupt Queue 3 with Interrupts
-+		unsigned int toe_iq2_intr	: 1;	// bit 26	TOE Interrupt Queue 2 with Interrupts
-+		unsigned int toe_iq1_intr	: 1;	// bit 25	TOE Interrupt Queue 1 with Interrupts
-+		unsigned int toe_iq0_intr	: 1;	// bit 24	TOE Interrupt Queue 0 with Interrupts
-+		unsigned int hwtq13_eof		: 1;	// bit 23	GMAC1 HW Tx Queue3 EOF Interrupt
-+		unsigned int hwtq12_eof		: 1;	// bit 22	GMAC1 HW Tx Queue2 EOF Interrupt
-+		unsigned int hwtq11_eof		: 1;	// bit 21	GMAC1 HW Tx Queue1 EOF Interrupt
-+		unsigned int hwtq10_eof		: 1;	// bit 20	GMAC1 HW Tx Queue0 EOF Interrupt
-+		unsigned int hwtq03_eof		: 1;	// bit 19	GMAC0 HW Tx Queue3 EOF Interrupt
-+		unsigned int hwtq02_eof		: 1;	// bit 18	GMAC0 HW Tx Queue2 EOF Interrupt
-+		unsigned int hwtq01_eof		: 1;	// bit 17	GMAC0 HW Tx Queue1 EOF Interrupt
-+		unsigned int hwtq00_eof		: 1;	// bit 16	GMAC0 HW Tx Queue0 EOF Interrupt
-+		unsigned int class_rx		: 14;	// bit 15:2	Classification Queue Rx Interrupt
-+		unsigned int default_q1_eof	: 1;	// bit 1	Default Queue 1 EOF Interrupt
-+		unsigned int default_q0_eof	: 1;	// bit 0	Default Queue 0 EOF Interrupt
-+#else
-+		unsigned int default_q0_eof	: 1;	// bit 0	Default Queue 0 EOF Interrupt
-+		unsigned int default_q1_eof	: 1;	// bit 1	Default Queue 1 EOF Interrupt
-+		unsigned int class_rx		: 14;	// bit 15:2	Classification Queue Rx Interrupt
-+		unsigned int hwtq00_eof		: 1;	// bit 16	GMAC0 HW Tx Queue0 EOF Interrupt
-+		unsigned int hwtq01_eof		: 1;	// bit 17	GMAC0 HW Tx Queue1 EOF Interrupt
-+		unsigned int hwtq02_eof		: 1;	// bit 18	GMAC0 HW Tx Queue2 EOF Interrupt
-+		unsigned int hwtq03_eof		: 1;	// bit 19	GMAC0 HW Tx Queue3 EOF Interrupt
-+		unsigned int hwtq10_eof		: 1;	// bit 20	GMAC1 HW Tx Queue0 EOF Interrupt
-+		unsigned int hwtq11_eof		: 1;	// bit 21	GMAC1 HW Tx Queue1 EOF Interrupt
-+		unsigned int hwtq12_eof		: 1;	// bit 22	GMAC1 HW Tx Queue2 EOF Interrupt
-+		unsigned int hwtq13_eof		: 1;	// bit 23	GMAC1 HW Tx Queue3 EOF Interrupt
-+		unsigned int toe_iq0_intr	: 1;	// bit 24	TOE Interrupt Queue 0 with Interrupts
-+		unsigned int toe_iq1_intr	: 1;	// bit 25	TOE Interrupt Queue 1 with Interrupts
-+		unsigned int toe_iq2_intr	: 1;	// bit 26	TOE Interrupt Queue 2 with Interrupts
-+		unsigned int toe_iq3_intr	: 1;	// bit 27	TOE Interrupt Queue 3 with Interrupts
-+		unsigned int toe_iq0_full	: 1;	// bit 28	TOE Interrupt Queue 0 Full Interrupt
-+		unsigned int toe_iq1_full	: 1;	// bit 29	TOE Interrupt Queue 1 Full Interrupt
-+		unsigned int toe_iq2_full	: 1;	// bit 30	TOE Interrupt Queue 2 Full Interrupt
-+		unsigned int toe_iq3_full	: 1;	// bit 31	TOE Interrupt Queue 3 Full Interrupt
-+#endif
-+	} bits;
-+} INTR_REG1_T;
-+
-+#define TOE_IQ3_FULL_INT_BIT		BIT(31)
-+#define TOE_IQ2_FULL_INT_BIT		BIT(30)
-+#define TOE_IQ1_FULL_INT_BIT		BIT(29)
-+#define TOE_IQ0_FULL_INT_BIT		BIT(28)
-+#define TOE_IQ3_INT_BIT				BIT(27)
-+#define TOE_IQ2_INT_BIT				BIT(26)
-+#define TOE_IQ1_INT_BIT				BIT(25)
-+#define TOE_IQ0_INT_BIT				BIT(24)
-+#define GMAC1_HWTQ13_EOF_INT_BIT	BIT(23)
-+#define GMAC1_HWTQ12_EOF_INT_BIT	BIT(22)
-+#define GMAC1_HWTQ11_EOF_INT_BIT	BIT(21)
-+#define GMAC1_HWTQ10_EOF_INT_BIT	BIT(20)
-+#define GMAC0_HWTQ03_EOF_INT_BIT	BIT(19)
-+#define GMAC0_HWTQ02_EOF_INT_BIT	BIT(18)
-+#define GMAC0_HWTQ01_EOF_INT_BIT	BIT(17)
-+#define GMAC0_HWTQ00_EOF_INT_BIT	BIT(16)
-+#define CLASS_RX_INT_BIT(x)			BIT((x+2))
-+#define DEFAULT_Q1_INT_BIT			BIT(1)
-+#define DEFAULT_Q0_INT_BIT			BIT(0)
-+
-+#define TOE_IQ_INT_BITS				(TOE_IQ0_INT_BIT | TOE_IQ1_INT_BIT | \
-+		               	 			TOE_IQ2_INT_BIT | TOE_IQ3_INT_BIT)
-+#define	TOE_IQ_FULL_BITS			(TOE_IQ0_FULL_INT_BIT | TOE_IQ1_FULL_INT_BIT | \
-+		                	 		TOE_IQ2_FULL_INT_BIT | TOE_IQ3_FULL_INT_BIT)
-+#define	TOE_IQ_ALL_BITS				(TOE_IQ_INT_BITS | TOE_IQ_FULL_BITS)
-+#define TOE_CLASS_RX_INT_BITS		0xfffc
-+
-+/**********************************************************************
-+ * Interrupt Status Register 2 	(offset 0x0040)
-+ * Interrupt Mask Register 2 	(offset 0x0044)
-+ * Interrupt Select Register 2 	(offset 0x0048)
-+ **********************************************************************/
-+typedef union
-+{
-+	unsigned int bits32;
-+	struct bit_0040
-+	{
-+#if (BIG_ENDIAN==1)
-+		unsigned int toe_q31_full	: 1;	// bit 31	TOE Queue 31 Full Interrupt
-+		unsigned int toe_q30_full	: 1;	// bit 30	TOE Queue 30 Full Interrupt
-+		unsigned int toe_q29_full	: 1;	// bit 29	TOE Queue 29 Full Interrupt
-+		unsigned int toe_q28_full	: 1;	// bit 28	TOE Queue 28 Full Interrupt
-+		unsigned int toe_q27_full	: 1;	// bit 27	TOE Queue 27 Full Interrupt
-+		unsigned int toe_q26_full	: 1;	// bit 26	TOE Queue 26 Full Interrupt
-+		unsigned int toe_q25_full	: 1;	// bit 25	TOE Queue 25 Full Interrupt
-+		unsigned int toe_q24_full	: 1;	// bit 24	TOE Queue 24 Full Interrupt
-+		unsigned int toe_q23_full	: 1;	// bit 23	TOE Queue 23 Full Interrupt
-+		unsigned int toe_q22_full	: 1;	// bit 22	TOE Queue 22 Full Interrupt
-+		unsigned int toe_q21_full	: 1;	// bit 21	TOE Queue 21 Full Interrupt
-+		unsigned int toe_q20_full	: 1;	// bit 20	TOE Queue 20 Full Interrupt
-+		unsigned int toe_q19_full	: 1;	// bit 19	TOE Queue 19 Full Interrupt
-+		unsigned int toe_q18_full	: 1;	// bit 18	TOE Queue 18 Full Interrupt
-+		unsigned int toe_q17_full	: 1;	// bit 17	TOE Queue 17 Full Interrupt
-+		unsigned int toe_q16_full	: 1;	// bit 16	TOE Queue 16 Full Interrupt
-+		unsigned int toe_q15_full	: 1;	// bit 15	TOE Queue 15 Full Interrupt
-+		unsigned int toe_q14_full	: 1;	// bit 14	TOE Queue 14 Full Interrupt
-+		unsigned int toe_q13_full	: 1;	// bit 13	TOE Queue 13 Full Interrupt
-+		unsigned int toe_q12_full	: 1;	// bit 12	TOE Queue 12 Full Interrupt
-+		unsigned int toe_q11_full	: 1;	// bit 11	TOE Queue 11 Full Interrupt
-+		unsigned int toe_q10_full	: 1;	// bit 10	TOE Queue 10 Full Interrupt
-+		unsigned int toe_q9_full	: 1;	// bit 9	TOE Queue 9 Full Interrupt
-+		unsigned int toe_q8_full	: 1;	// bit 8	TOE Queue 8 Full Interrupt
-+		unsigned int toe_q7_full	: 1;	// bit 7	TOE Queue 7 Full Interrupt
-+		unsigned int toe_q6_full	: 1;	// bit 6	TOE Queue 6 Full Interrupt
-+		unsigned int toe_q5_full	: 1;	// bit 5	TOE Queue 5 Full Interrupt
-+		unsigned int toe_q4_full	: 1;	// bit 4	TOE Queue 4 Full Interrupt
-+		unsigned int toe_q3_full	: 1;	// bit 3	TOE Queue 3 Full Interrupt
-+		unsigned int toe_q2_full	: 1;	// bit 2	TOE Queue 2 Full Interrupt
-+		unsigned int toe_q1_full	: 1;	// bit 1	TOE Queue 1 Full Interrupt
-+		unsigned int toe_q0_full	: 1;	// bit 0	TOE Queue 0 Full Interrupt
-+#else
-+		unsigned int toe_q0_full	: 1;	// bit 0	TOE Queue 0 Full Interrupt
-+		unsigned int toe_q1_full	: 1;	// bit 1	TOE Queue 1 Full Interrupt
-+		unsigned int toe_q2_full	: 1;	// bit 2	TOE Queue 2 Full Interrupt
-+		unsigned int toe_q3_full	: 1;	// bit 3	TOE Queue 3 Full Interrupt
-+		unsigned int toe_q4_full	: 1;	// bit 4	TOE Queue 4 Full Interrupt
-+		unsigned int toe_q5_full	: 1;	// bit 5	TOE Queue 5 Full Interrupt
-+		unsigned int toe_q6_full	: 1;	// bit 6	TOE Queue 6 Full Interrupt
-+		unsigned int toe_q7_full	: 1;	// bit 7	TOE Queue 7 Full Interrupt
-+		unsigned int toe_q8_full	: 1;	// bit 8	TOE Queue 8 Full Interrupt
-+		unsigned int toe_q9_full	: 1;	// bit 9	TOE Queue 9 Full Interrupt
-+		unsigned int toe_q10_full	: 1;	// bit 10	TOE Queue 10 Full Interrupt
-+		unsigned int toe_q11_full	: 1;	// bit 11	TOE Queue 11 Full Interrupt
-+		unsigned int toe_q12_full	: 1;	// bit 12	TOE Queue 12 Full Interrupt
-+		unsigned int toe_q13_full	: 1;	// bit 13	TOE Queue 13 Full Interrupt
-+		unsigned int toe_q14_full	: 1;	// bit 14	TOE Queue 14 Full Interrupt
-+		unsigned int toe_q15_full	: 1;	// bit 15	TOE Queue 15 Full Interrupt
-+		unsigned int toe_q16_full	: 1;	// bit 16	TOE Queue 16 Full Interrupt
-+		unsigned int toe_q17_full	: 1;	// bit 17	TOE Queue 17 Full Interrupt
-+		unsigned int toe_q18_full	: 1;	// bit 18	TOE Queue 18 Full Interrupt
-+		unsigned int toe_q19_full	: 1;	// bit 19	TOE Queue 19 Full Interrupt
-+		unsigned int toe_q20_full	: 1;	// bit 20	TOE Queue 20 Full Interrupt
-+		unsigned int toe_q21_full	: 1;	// bit 21	TOE Queue 21 Full Interrupt
-+		unsigned int toe_q22_full	: 1;	// bit 22	TOE Queue 22 Full Interrupt
-+		unsigned int toe_q23_full	: 1;	// bit 23	TOE Queue 23 Full Interrupt
-+		unsigned int toe_q24_full	: 1;	// bit 24	TOE Queue 24 Full Interrupt
-+		unsigned int toe_q25_full	: 1;	// bit 25	TOE Queue 25 Full Interrupt
-+		unsigned int toe_q26_full	: 1;	// bit 26	TOE Queue 26 Full Interrupt
-+		unsigned int toe_q27_full	: 1;	// bit 27	TOE Queue 27 Full Interrupt
-+		unsigned int toe_q28_full	: 1;	// bit 28	TOE Queue 28 Full Interrupt
-+		unsigned int toe_q29_full	: 1;	// bit 29	TOE Queue 29 Full Interrupt
-+		unsigned int toe_q30_full	: 1;	// bit 30	TOE Queue 30 Full Interrupt
-+		unsigned int toe_q31_full	: 1;	// bit 31	TOE Queue 31 Full Interrupt
-+#endif
-+	} bits;
-+} INTR_REG2_T;
-+
-+#define TOE_QL_FULL_INT_BIT(x)		BIT(x)
-+
-+/**********************************************************************
-+ * Interrupt Status Register 3 	(offset 0x0050)
-+ * Interrupt Mask Register 3 	(offset 0x0054)
-+ * Interrupt Select Register 3 	(offset 0x0058)
-+ **********************************************************************/
-+typedef union
-+{
-+	unsigned int bits32;
-+	struct bit_0050
-+	{
-+#if (BIG_ENDIAN==1)
-+		unsigned int toe_q63_full	: 1;	// bit 63	TOE Queue 63 Full Interrupt
-+		unsigned int toe_q62_full	: 1;	// bit 62	TOE Queue 62 Full Interrupt
-+		unsigned int toe_q61_full	: 1;	// bit 61	TOE Queue 61 Full Interrupt
-+		unsigned int toe_q60_full	: 1;	// bit 60	TOE Queue 60 Full Interrupt
-+		unsigned int toe_q59_full	: 1;	// bit 59	TOE Queue 59 Full Interrupt
-+		unsigned int toe_q58_full	: 1;	// bit 58	TOE Queue 58 Full Interrupt
-+		unsigned int toe_q57_full	: 1;	// bit 57	TOE Queue 57 Full Interrupt
-+		unsigned int toe_q56_full	: 1;	// bit 56	TOE Queue 56 Full Interrupt
-+		unsigned int toe_q55_full	: 1;	// bit 55	TOE Queue 55 Full Interrupt
-+		unsigned int toe_q54_full	: 1;	// bit 54	TOE Queue 54 Full Interrupt
-+		unsigned int toe_q53_full	: 1;	// bit 53	TOE Queue 53 Full Interrupt
-+		unsigned int toe_q52_full	: 1;	// bit 52	TOE Queue 52 Full Interrupt
-+		unsigned int toe_q51_full	: 1;	// bit 51	TOE Queue 51 Full Interrupt
-+		unsigned int toe_q50_full	: 1;	// bit 50	TOE Queue 50 Full Interrupt
-+		unsigned int toe_q49_full	: 1;	// bit 49	TOE Queue 49 Full Interrupt
-+		unsigned int toe_q48_full	: 1;	// bit 48	TOE Queue 48 Full Interrupt
-+		unsigned int toe_q47_full	: 1;	// bit 47	TOE Queue 47 Full Interrupt
-+		unsigned int toe_q46_full	: 1;	// bit 46	TOE Queue 46 Full Interrupt
-+		unsigned int toe_q45_full	: 1;	// bit 45	TOE Queue 45 Full Interrupt
-+		unsigned int toe_q44_full	: 1;	// bit 44	TOE Queue 44 Full Interrupt
-+		unsigned int toe_q43_full	: 1;	// bit 43	TOE Queue 43 Full Interrupt
-+		unsigned int toe_q42_full	: 1;	// bit 42	TOE Queue 42 Full Interrupt
-+		unsigned int toe_q41_full	: 1;	// bit 41	TOE Queue 41 Full Interrupt
-+		unsigned int toe_q40_full	: 1;	// bit 40	TOE Queue 40 Full Interrupt
-+		unsigned int toe_q39_full	: 1;	// bit 39 	TOE Queue 39 Full Interrupt
-+		unsigned int toe_q38_full	: 1;	// bit 38	TOE Queue 38 Full Interrupt
-+		unsigned int toe_q37_full	: 1;	// bit 37	TOE Queue 37 Full Interrupt
-+		unsigned int toe_q36_full	: 1;	// bit 36	TOE Queue 36 Full Interrupt
-+		unsigned int toe_q35_full	: 1;	// bit 35	TOE Queue 35 Full Interrupt
-+		unsigned int toe_q34_full	: 1;	// bit 34	TOE Queue 34 Full Interrupt
-+		unsigned int toe_q33_full	: 1;	// bit 33	TOE Queue 33 Full Interrupt
-+		unsigned int toe_q32_full	: 1;	// bit 32	TOE Queue 32 Full Interrupt
-+#else
-+		unsigned int toe_q32_full	: 1;	// bit 32	TOE Queue 32 Full Interrupt
-+		unsigned int toe_q33_full	: 1;	// bit 33	TOE Queue 33 Full Interrupt
-+		unsigned int toe_q34_full	: 1;	// bit 34	TOE Queue 34 Full Interrupt
-+		unsigned int toe_q35_full	: 1;	// bit 35	TOE Queue 35 Full Interrupt
-+		unsigned int toe_q36_full	: 1;	// bit 36	TOE Queue 36 Full Interrupt
-+		unsigned int toe_q37_full	: 1;	// bit 37	TOE Queue 37 Full Interrupt
-+		unsigned int toe_q38_full	: 1;	// bit 38	TOE Queue 38 Full Interrupt
-+		unsigned int toe_q39_full	: 1;	// bit 39	TOE Queue 39 Full Interrupt
-+		unsigned int toe_q40_full	: 1;	// bit 40	TOE Queue 40 Full Interrupt
-+		unsigned int toe_q41_full	: 1;	// bit 41	TOE Queue 41 Full Interrupt
-+		unsigned int toe_q42_full	: 1;	// bit 42	TOE Queue 42 Full Interrupt
-+		unsigned int toe_q43_full	: 1;	// bit 43	TOE Queue 43 Full Interrupt
-+		unsigned int toe_q44_full	: 1;	// bit 44	TOE Queue 44 Full Interrupt
-+		unsigned int toe_q45_full	: 1;	// bit 45	TOE Queue 45 Full Interrupt
-+		unsigned int toe_q46_full	: 1;	// bit 46	TOE Queue 46 Full Interrupt
-+		unsigned int toe_q47_full	: 1;	// bit 47	TOE Queue 47 Full Interrupt
-+		unsigned int toe_q48_full	: 1;	// bit 48	TOE Queue 48 Full Interrupt
-+		unsigned int toe_q49_full	: 1;	// bit 49	TOE Queue 49 Full Interrupt
-+		unsigned int toe_q50_full	: 1;	// bit 50	TOE Queue 50 Full Interrupt
-+		unsigned int toe_q51_full	: 1;	// bit 51	TOE Queue 51 Full Interrupt
-+		unsigned int toe_q52_full	: 1;	// bit 52	TOE Queue 52 Full Interrupt
-+		unsigned int toe_q53_full	: 1;	// bit 53	TOE Queue 53 Full Interrupt
-+		unsigned int toe_q54_full	: 1;	// bit 54	TOE Queue 54 Full Interrupt
-+		unsigned int toe_q55_full	: 1;	// bit 55	TOE Queue 55 Full Interrupt
-+		unsigned int toe_q56_full	: 1;	// bit 56	TOE Queue 56 Full Interrupt
-+		unsigned int toe_q57_full	: 1;	// bit 57	TOE Queue 57 Full Interrupt
-+		unsigned int toe_q58_full	: 1;	// bit 58	TOE Queue 58 Full Interrupt
-+		unsigned int toe_q59_full	: 1;	// bit 59	TOE Queue 59 Full Interrupt
-+		unsigned int toe_q60_full	: 1;	// bit 60	TOE Queue 60 Full Interrupt
-+		unsigned int toe_q61_full	: 1;	// bit 61	TOE Queue 61 Full Interrupt
-+		unsigned int toe_q62_full	: 1;	// bit 62	TOE Queue 62 Full Interrupt
-+		unsigned int toe_q63_full	: 1;	// bit 63	TOE Queue 63 Full Interrupt
-+#endif
-+	} bits;
-+} INTR_REG3_T;
-+
-+#define TOE_QH_FULL_INT_BIT(x)		BIT(x-32)
-+
-+/**********************************************************************
-+ * Interrupt Status Register 4 	(offset 0x0060)
-+ * Interrupt Mask Register 4 	(offset 0x0064)
-+ * Interrupt Select Register 4 	(offset 0x0068)
-+ **********************************************************************/
-+typedef union
-+{
-+	unsigned char byte;
-+	struct bit_0060
-+	{
-+#if (BIG_ENDIAN==1)
-+		unsigned char reserved		: 1;	//
-+		unsigned char cnt_full 		: 1;	// MIB counters half full interrupt
-+		unsigned char rx_pause_on	: 1;	// received pause on frame interrupt
-+		unsigned char tx_pause_on	: 1;	// transmit pause on frame interrupt
-+		unsigned char rx_pause_off  : 1;	// received pause off frame interrupt
-+		unsigned char tx_pause_off	: 1;	// received pause off frame interrupt
-+		unsigned char rx_overrun	: 1;    // GMAC Rx FIFO overrun interrupt
-+		unsigned char status_changed: 1;	// Status Changed Intr for RGMII Mode
-+#else
-+		unsigned char status_changed: 1;	// Status Changed Intr for RGMII Mode
-+		unsigned char rx_overrun	: 1;   // GMAC Rx FIFO overrun interrupt
-+		unsigned char tx_pause_off	: 1;	// received pause off frame interrupt
-+		unsigned char rx_pause_off  : 1;	// received pause off frame interrupt
-+		unsigned char tx_pause_on	: 1;	// transmit pause on frame interrupt
-+		unsigned char rx_pause_on	: 1;	// received pause on frame interrupt
-+		unsigned char cnt_full 		: 1;	// MIB counters half full interrupt
-+		unsigned char reserved		: 1;	//
-+#endif
-+	} _PACKED_ bits;
-+} _PACKED_ GMAC_INTR_T;
-+
-+typedef union
-+{
-+	unsigned int bits32;
-+	struct bit_0060_2
-+	{
-+#if (BIG_ENDIAN==1)
-+		GMAC_INTR_T		gmac1;
-+		GMAC_INTR_T		gmac0;
-+		unsigned int	class_qf_int: 14;	// bit 15:2 Classification Rx Queue13-0 Full Intr.
-+		unsigned int    hwfq_empty	: 1;	// bit 1	Hardware Free Queue Empty Intr.
-+		unsigned int    swfq_empty	: 1;	// bit 0	Software Free Queue Empty Intr.
-+#else
-+#endif
-+		unsigned int    swfq_empty	: 1;	// bit 0	Software Free Queue Empty Intr.
-+		unsigned int    hwfq_empty	: 1;	// bit 1	Hardware Free Queue Empty Intr.
-+		unsigned int	class_qf_int: 14;	// bit 15:2 Classification Rx Queue13-0 Full Intr.
-+		GMAC_INTR_T		gmac0;
-+		GMAC_INTR_T		gmac1;
-+	} bits;
-+} INTR_REG4_T;
-+
-+#define GMAC1_RESERVED_INT_BIT		BIT(31)
-+#define GMAC1_MIB_INT_BIT			BIT(30)
-+#define GMAC1_RX_PAUSE_ON_INT_BIT	BIT(29)
-+#define GMAC1_TX_PAUSE_ON_INT_BIT	BIT(28)
-+#define GMAC1_RX_PAUSE_OFF_INT_BIT	BIT(27)
-+#define GMAC1_TX_PAUSE_OFF_INT_BIT	BIT(26)
-+#define GMAC1_RX_OVERRUN_INT_BIT	BIT(25)
-+#define GMAC1_STATUS_CHANGE_INT_BIT	BIT(24)
-+#define GMAC0_RESERVED_INT_BIT		BIT(23)
-+#define GMAC0_MIB_INT_BIT			BIT(22)
-+#define GMAC0_RX_PAUSE_ON_INT_BIT	BIT(21)
-+#define GMAC0_TX_PAUSE_ON_INT_BIT	BIT(20)
-+#define GMAC0_RX_PAUSE_OFF_INT_BIT	BIT(19)
-+#define GMAC0_TX_PAUSE_OFF_INT_BIT	BIT(18)
-+#define GMAC0_RX_OVERRUN_INT_BIT	BIT(17)
-+#define GMAC0_STATUS_CHANGE_INT_BIT	BIT(16)
-+#define CLASS_RX_FULL_INT_BIT(x)	BIT((x+2))
-+#define HWFQ_EMPTY_INT_BIT			BIT(1)
-+#define SWFQ_EMPTY_INT_BIT			BIT(0)
-+
-+#if 1
-+#define GMAC0_INT_BITS				(GMAC0_MIB_INT_BIT)
-+#define GMAC1_INT_BITS				(GMAC1_MIB_INT_BIT)
-+#else
-+#define GMAC0_INT_BITS				(GMAC0_RESERVED_INT_BIT | GMAC0_MIB_INT_BIT | \
-+									 GMAC0_RX_PAUSE_ON_INT_BIT | GMAC0_TX_PAUSE_ON_INT_BIT |	\
-+									 GMAC0_RX_PAUSE_OFF_INT_BIT | GMAC0_TX_PAUSE_OFF_INT_BIT | 	\
-+									 GMAC0_RX_OVERRUN_INT_BIT | GMAC0_STATUS_CHANGE_INT_BIT)
-+#define GMAC1_INT_BITS				(GMAC1_RESERVED_INT_BIT | GMAC1_MIB_INT_BIT | \
-+									 GMAC1_RX_PAUSE_ON_INT_BIT | GMAC1_TX_PAUSE_ON_INT_BIT |	\
-+									 GMAC1_RX_PAUSE_OFF_INT_BIT | GMAC1_TX_PAUSE_OFF_INT_BIT | 	\
-+									 GMAC1_RX_OVERRUN_INT_BIT | GMAC1_STATUS_CHANGE_INT_BIT)
-+#endif
-+
-+#define CLASS_RX_FULL_INT_BITS		0xfffc
-+
-+/**********************************************************************
-+ * GLOBAL_QUEUE_THRESHOLD_REG 	(offset 0x0070)
-+ **********************************************************************/
-+typedef union
-+{
-+	unsigned int bits32;
-+	struct bit_0070_2
-+	{
-+#if (BIG_ENDIAN==1)
-+		unsigned int	toe_class	: 8;	// 31:24
-+		unsigned int	intrq		: 8;	// 23:16
-+		unsigned int    hwfq_empty	: 8;	// 15:8		Hardware Free Queue Empty Threshold
-+		unsigned int    swfq_empty	: 8;	//  7:0  	Software Free Queue Empty Threshold
-+#else
-+#endif
-+		unsigned int    swfq_empty	: 8;	//  7:0  	Software Free Queue Empty Threshold
-+		unsigned int    hwfq_empty	: 8;	// 15:8		Hardware Free Queue Empty Threshold
-+		unsigned int	intrq		: 8;	// 23:16
-+		unsigned int	toe_class	: 8;	// 31:24
-+	} bits;
-+} QUEUE_THRESHOLD_T;
-+
-+
-+/**********************************************************************
-+ * GMAC DMA Control Register
-+ * GMAC0 offset 0x8000
-+ * GMAC1 offset 0xC000
-+ **********************************************************************/
-+typedef union
-+{
-+	unsigned int bits32;
-+	struct bit_8000
-+	{
-+#if (BIG_ENDIAN==1)
-+		unsigned int    rd_enable		: 1;	// bit 31	Rx DMA Enable
-+		unsigned int    td_enable		: 1;	// bit 30	Tx DMA Enable
-+		unsigned int    loopback		: 1;	// bit 29	Loopback TxDMA to RxDMA
-+		unsigned int    drop_small_ack	: 1;	// bit 28	1: Drop, 0: Accept
-+		unsigned int	reserved		: 10;	// bit 27:18
-+		unsigned int	rd_insert_bytes	: 2;	// bit 17:16
-+		unsigned int	rd_prot			: 4;	// bit 15:12 DMA Protection Control
-+		unsigned int	rd_burst_size	: 2;	// bit 11:10 DMA max burst size for every AHB request
-+		unsigned int	rd_bus		    : 2;	// bit 9:8 	Peripheral Bus Width
-+		unsigned int	td_prot			: 4;	// bit 7:4  TxDMA protection control
-+		unsigned int	td_burst_size	: 2;	// bit 3:2	TxDMA max burst size for every AHB request
-+		unsigned int	td_bus		    : 2;	// bit 1:0  Peripheral Bus Width
-+#else
-+		unsigned int	td_bus		    : 2;	// bit 1:0  Peripheral Bus Width
-+		unsigned int	td_burst_size	: 2;	// bit 3:2	TxDMA max burst size for every AHB request
-+		unsigned int	td_prot			: 4;	// bit 7:4  TxDMA protection control
-+		unsigned int	rd_bus		    : 2;	// bit 9:8 	Peripheral Bus Width
-+		unsigned int	rd_burst_size	: 2;	// bit 11:10 DMA max burst size for every AHB request
-+		unsigned int	rd_prot			: 4;	// bit 15:12 DMA Protection Control
-+		unsigned int	rd_insert_bytes	: 2;	// bit 17:16
-+		unsigned int	reserved		: 10;	// bit 27:18
-+		unsigned int    drop_small_ack	: 1;	// bit 28	1: Drop, 0: Accept
-+		unsigned int    loopback		: 1;	// bit 29	Loopback TxDMA to RxDMA
-+		unsigned int    td_enable		: 1;	// bit 30	Tx DMA Enable
-+		unsigned int    rd_enable		: 1;	// bit 31	Rx DMA Enable
-+#endif
-+	} bits;
-+} GMAC_DMA_CTRL_T;
-+
-+/**********************************************************************
-+ * GMAC Tx Weighting Control Register 0
-+ * GMAC0 offset 0x8004
-+ * GMAC1 offset 0xC004
-+ **********************************************************************/
-+typedef union
-+{
-+	unsigned int bits32;
-+	struct bit_8004
-+	{
-+#if (BIG_ENDIAN==1)
-+		unsigned int    reserved		: 8;	// bit 31:24
-+		unsigned int    hw_tq3			: 6;	// bit 23:18	HW TX Queue 0
-+		unsigned int    hw_tq2			: 6;	// bit 17:12	HW TX Queue 1
-+		unsigned int    hw_tq1			: 6;	// bit 11:6		HW TX Queue 2
-+		unsigned int    hw_tq0			: 6;	// bit 5:0		HW TX Queue 3
-+#else
-+		unsigned int    hw_tq0			: 6;	// bit 5:0		HW TX Queue 3
-+		unsigned int    hw_tq1			: 6;	// bit 11:6		HW TX Queue 2
-+		unsigned int    hw_tq2			: 6;	// bit 17:12	HW TX Queue 1
-+		unsigned int    hw_tq3			: 6;	// bit 23:18	HW TX Queue 0
-+		unsigned int    reserved		: 8;	// bit 31:24
-+#endif
-+	} bits;
-+} GMAC_TX_WCR0_T;	// Weighting Control Register 0
-+
-+/**********************************************************************
-+ * GMAC Tx Weighting Control Register 1
-+ * GMAC0 offset 0x8008
-+ * GMAC1 offset 0xC008
-+ **********************************************************************/
-+typedef union
-+{
-+	unsigned int bits32;
-+	struct bit_8008
-+	{
-+#if (BIG_ENDIAN==1)
-+		unsigned int    reserved		: 2;	// bit 31:30
-+		unsigned int    sw_tq5			: 5;	// bit 29:25	SW TX Queue 5
-+		unsigned int    sw_tq4			: 5;	// bit 24:20	SW TX Queue 4
-+		unsigned int    sw_tq3			: 5;	// bit 19:15	SW TX Queue 3
-+		unsigned int    sw_tq2			: 5;	// bit 14:10	SW TX Queue 2
-+		unsigned int    sw_tq1			: 5;	// bit 9:5		SW TX Queue 1
-+		unsigned int    sw_tq0			: 5;	// bit 4:0		SW TX Queue 0
-+#else
-+		unsigned int    sw_tq0			: 5;	// bit 4:0		SW TX Queue 0
-+		unsigned int    sw_tq1			: 5;	// bit 9:5		SW TX Queue 1
-+		unsigned int    sw_tq2			: 5;	// bit 14:10	SW TX Queue 2
-+		unsigned int    sw_tq3			: 5;	// bit 19:15	SW TX Queue 3
-+		unsigned int    sw_tq4			: 5;	// bit 24:20	SW TX Queue 4
-+		unsigned int    sw_tq5			: 5;	// bit 29:25	SW TX Queue 5
-+		unsigned int    reserved		: 2;	// bit 31:30
-+#endif
-+	} bits;
-+} GMAC_TX_WCR1_T;	// Weighting Control Register 1
-+
-+/**********************************************************************
-+ * Queue Read/Write Pointer
-+ * GMAC SW TX Queue 0~5 Read/Write Pointer register
-+ * GMAC0 offset 0x800C ~ 0x8020
-+ * GMAC1 offset 0xC00C ~ 0xC020
-+ * GMAC HW TX Queue 0~3 Read/Write Pointer register
-+ * GMAC0 offset 0x8024 ~ 0x8030
-+ * GMAC1 offset 0xC024 ~ 0xC030
-+ **********************************************************************/
-+// see DMA_RWPTR_T structure
-+
-+/**********************************************************************
-+ * GMAC DMA Tx First Description Address Register
-+ * GMAC0 offset 0x8038
-+ * GMAC1 offset 0xC038
-+ **********************************************************************/
-+typedef union
-+{
-+	unsigned int bits32;
-+	struct bit_8038
-+	{
-+#if (BIG_ENDIAN==1)
-+		unsigned int td_first_des_ptr	: 28;	// bit 31:4	first descriptor address
-+		unsigned int td_busy			:  1;	// bit 3	1: TxDMA busy; 0: TxDMA idle
-+		unsigned int reserved			:  3;
-+#else
-+		unsigned int reserved			:  3;
-+		unsigned int td_busy			:  1;	// bit 3	1: TxDMA busy; 0: TxDMA idle
-+		unsigned int td_first_des_ptr	: 28;	// bit 31:4	first descriptor address
-+#endif
-+	} bits;
-+} GMAC_TXDMA_FIRST_DESC_T;
-+
-+/**********************************************************************
-+ * GMAC DMA Tx Current Description Address Register
-+ * GMAC0 offset 0x803C
-+ * GMAC1 offset 0xC03C
-+ **********************************************************************/
-+typedef union
-+{
-+	unsigned int bits32;
-+	struct bit_803C
-+	{
-+#if (BIG_ENDIAN==1)
-+		unsigned int td_curr_desc_ptr	: 28;	// bit 31:4	current descriptor address
-+		unsigned int reserved			:  4;
-+#else
-+		unsigned int reserved			:  4;
-+		unsigned int td_curr_desc_ptr	: 28;	// bit 31:4	current descriptor address
-+#endif
-+	} bits;
-+} GMAC_TXDMA_CURR_DESC_T;
-+
-+/**********************************************************************
-+ * GMAC DMA Tx Description Word 0 Register
-+ * GMAC0 offset 0x8040
-+ * GMAC1 offset 0xC040
-+ **********************************************************************/
-+typedef union
-+{
-+	unsigned int bits32;
-+	struct bit_8040
-+	{
-+#if (BIG_ENDIAN==1)
-+		unsigned int reserved		: 1;	// bit 31
-+		unsigned int derr			: 1;	// bit 30	 data error during processing this descriptor
-+		unsigned int perr			: 1;	// bit 29	 protocol error during processing this descriptor
-+		unsigned int status_rvd		: 6;	// bit 28:23 Tx Status, Reserved bits
-+		unsigned int status_tx_ok	: 1;	// bit 22    Tx Status, 1: Successful 0: Failed
-+		unsigned int desc_count 	: 6;	// bit 21:16 number of descriptors used for the current frame
-+		unsigned int buffer_size 	: 16;	// bit 15:0  Transfer size
-+#else
-+		unsigned int buffer_size 	: 16;	// bit 15:0  Transfer size
-+		unsigned int desc_count 	: 6;	// bit 21:16 number of descriptors used for the current frame
-+		unsigned int status_tx_ok	: 1;	// bit 22    Tx Status, 1: Successful 0: Failed
-+		unsigned int status_rvd		: 6;	// bit 28:23 Tx Status, Reserved bits
-+		unsigned int perr			: 1;	// bit 29	 protocol error during processing this descriptor
-+		unsigned int derr			: 1;	// bit 30	 data error during processing this descriptor
-+		unsigned int reserved		: 1;	// bit 31
-+#endif
-+	} bits;
-+} GMAC_TXDESC_0_T;
-+
-+/**********************************************************************
-+ * GMAC DMA Tx Description Word 1 Register
-+ * GMAC0 offset 0x8044
-+ * GMAC1 offset 0xC044
-+ **********************************************************************/
-+typedef union
-+{
-+	unsigned int bits32;
-+	struct txdesc_word1
-+	{
-+#if (BIG_ENDIAN==1)
-+		unsigned int	reserved	: 9;	// bit 31:23 	Tx Flag, Reserved
-+		unsigned int	ip_fixed_len: 1;	// bit 22
-+		unsigned int	bypass_tss	: 1;	// bit 21
-+		unsigned int	udp_chksum	: 1;	// bit 20		UDP Checksum Enable
-+		unsigned int	tcp_chksum	: 1;	// bit 19		TCP Checksum Enable
-+		unsigned int	ipv6_enable	: 1;	// bit 18		IPV6 Tx Enable
-+		unsigned int	ip_chksum	: 1;	// bit 17		IPV4 Header Checksum Enable
-+		unsigned int	mtu_enable	: 1;	// bit 16		TSS segmentation use MTU setting
-+		unsigned int	byte_count	: 16;	// bit 15: 0	Tx Frame Byte Count
-+#else
-+		unsigned int	byte_count	: 16;	// bit 15: 0	Tx Frame Byte Count
-+		unsigned int	mtu_enable	: 1;	// bit 16		TSS segmentation use MTU setting
-+		unsigned int	ip_chksum	: 1;	// bit 17		IPV4 Header Checksum Enable
-+		unsigned int	ipv6_enable	: 1;	// bit 18		IPV6 Tx Enable
-+		unsigned int	tcp_chksum	: 1;	// bit 19		TCP Checksum Enable
-+		unsigned int	udp_chksum	: 1;	// bit 20		UDP Checksum Enable
-+		unsigned int	bypass_tss	: 1;	// bit 21
-+		unsigned int	ip_fixed_len: 1;	// bit 22
-+		unsigned int	reserved	: 9;	// bit 31:23 	Tx Flag, Reserved
-+#endif
-+	} bits;
-+} GMAC_TXDESC_1_T;
-+
-+#define TSS_IP_FIXED_LEN_BIT	BIT(22)
-+#define TSS_UDP_CHKSUM_BIT		BIT(20)
-+#define TSS_TCP_CHKSUM_BIT		BIT(19)
-+#define TSS_IPV6_ENABLE_BIT		BIT(18)
-+#define TSS_IP_CHKSUM_BIT		BIT(17)
-+#define TSS_MTU_ENABLE_BIT		BIT(16)
-+
-+/**********************************************************************
-+ * GMAC DMA Tx Description Word 2 Register
-+ * GMAC0 offset 0x8048
-+ * GMAC1 offset 0xC048
-+ **********************************************************************/
-+typedef union
-+{
-+	unsigned int	bits32;
-+	unsigned int 	buf_adr;
-+} GMAC_TXDESC_2_T;
-+
-+/**********************************************************************
-+ * GMAC DMA Tx Description Word 3 Register
-+ * GMAC0 offset 0x804C
-+ * GMAC1 offset 0xC04C
-+ **********************************************************************/
-+typedef union
-+{
-+	unsigned int bits32;
-+	struct txdesc_word3
-+	{
-+#if (BIG_ENDIAN==1)
-+		unsigned int	sof_eof		: 2;	// bit 31:30 	11: only one, 10: first, 01: last, 00: linking
-+		unsigned int	eofie		: 1;	// bit 29		End of frame interrupt enable
-+		unsigned int	reserved	: 18;	// bit 28:11
-+		unsigned int	mtu_size	: 11;	// bit 10: 0	Tx Frame Byte Count
-+#else
-+		unsigned int	mtu_size	: 11;	// bit 10: 0	Tx Frame Byte Count
-+		unsigned int	reserved	: 18;	// bit 28:11
-+		unsigned int	eofie		: 1;	// bit 29		End of frame interrupt enable
-+		unsigned int	sof_eof		: 2;	// bit 31:30 	11: only one, 10: first, 01: last, 00: linking
-+#endif
-+	} bits;
-+} GMAC_TXDESC_3_T;
-+#define SOF_EOF_BIT_MASK	0x3fffffff
-+#define SOF_BIT				0x80000000
-+#define EOF_BIT				0x40000000
-+#define EOFIE_BIT			BIT(29)
-+#define MTU_SIZE_BIT_MASK	0x7ff
-+
-+/**********************************************************************
-+ * GMAC Tx Descriptor
-+ **********************************************************************/
-+typedef struct
-+{
-+	GMAC_TXDESC_0_T	word0;
-+	GMAC_TXDESC_1_T	word1;
-+	GMAC_TXDESC_2_T	word2;
-+	GMAC_TXDESC_3_T	word3;
-+} GMAC_TXDESC_T;
-+
-+
-+/**********************************************************************
-+ * GMAC DMA Rx First Description Address Register
-+ * GMAC0 offset 0x8058
-+ * GMAC1 offset 0xC058
-+ **********************************************************************/
-+typedef union
-+{
-+	unsigned int bits32;
-+	struct bit_8058
-+	{
-+#if (BIG_ENDIAN==1)
-+		unsigned int rd_first_des_ptr	: 28;	// bit 31:4 first descriptor address
-+		unsigned int rd_busy			:  1;	// bit 3	1-RxDMA busy; 0-RxDMA idle
-+		unsigned int reserved			:  3;	// bit 2:0
-+#else
-+		unsigned int reserved			:  3;	// bit 2:0
-+		unsigned int rd_busy			:  1;	// bit 3	1-RxDMA busy; 0-RxDMA idle
-+		unsigned int rd_first_des_ptr	: 28;	// bit 31:4 first descriptor address
-+#endif
-+	} bits;
-+} GMAC_RXDMA_FIRST_DESC_T;
-+
-+/**********************************************************************
-+ * GMAC DMA Rx Current Description Address Register
-+ * GMAC0 offset 0x805C
-+ * GMAC1 offset 0xC05C
-+ **********************************************************************/
-+typedef union
-+{
-+	unsigned int bits32;
-+	struct bit_805C
-+	{
-+#if (BIG_ENDIAN==1)
-+		unsigned int rd_curr_des_ptr	: 28;	// bit 31:4 current descriptor address
-+		unsigned int reserved			:  4;	// bit 3:0
-+#else
-+		unsigned int reserved			:  4;	// bit 3:0
-+		unsigned int rd_curr_des_ptr	: 28;	// bit 31:4 current descriptor address
-+#endif
-+	} bits;
-+} GMAC_RXDMA_CURR_DESC_T;
-+
-+/**********************************************************************
-+ * GMAC DMA Rx Description Word 0 Register
-+ * GMAC0 offset 0x8060
-+ * GMAC1 offset 0xC060
-+ **********************************************************************/
-+typedef union
-+{
-+	unsigned int bits32;
-+	struct bit_8060
-+	{
-+#if (BIG_ENDIAN==1)
-+		unsigned int drop			: 1;	// bit 31	 TOE/CIS Queue Full dropped packet to default queue
-+		unsigned int derr			: 1;	// bit 30	 data error during processing this descriptor
-+		unsigned int perr			: 1;	// bit 29	 protocol error during processing this descriptor
-+		unsigned int chksum_status	: 3;	// bit 28:26 Check Sum Status
-+		unsigned int status			: 4;	// bit 24:22 Status of rx frame
-+		unsigned int desc_count 	: 6;	// bit 21:16 number of descriptors used for the current frame
-+		unsigned int buffer_size 	: 16;	// bit 15:0  number of descriptors used for the current frame
-+#else
-+		unsigned int buffer_size 	: 16;	// bit 15:0  number of descriptors used for the current frame
-+		unsigned int desc_count 	: 6;	// bit 21:16 number of descriptors used for the current frame
-+		unsigned int status			: 4;	// bit 24:22 Status of rx frame
-+		unsigned int chksum_status	: 3;	// bit 28:26 Check Sum Status
-+		unsigned int perr			: 1;	// bit 29	 protocol error during processing this descriptor
-+		unsigned int derr			: 1;	// bit 30	 data error during processing this descriptor
-+		unsigned int drop			: 1;	// bit 31	 TOE/CIS Queue Full dropped packet to default queue
-+#endif
-+	} bits;
-+} GMAC_RXDESC_0_T;
-+
-+#define		GMAC_RXDESC_0_T_derr				BIT(30)
-+#define		GMAC_RXDESC_0_T_perr				BIT(29)
-+#define		GMAC_RXDESC_0_T_chksum_status(x)	BIT((x+26))
-+#define		GMAC_RXDESC_0_T_status(x)			BIT((x+22))
-+#define		GMAC_RXDESC_0_T_desc_count(x)		BIT((x+16))
-+
-+#define	RX_CHKSUM_IP_UDP_TCP_OK			0
-+#define	RX_CHKSUM_IP_OK_ONLY			1
-+#define	RX_CHKSUM_NONE					2
-+#define	RX_CHKSUM_IP_ERR_UNKNOWN		4
-+#define	RX_CHKSUM_IP_ERR				5
-+#define	RX_CHKSUM_TCP_UDP_ERR			6
-+#define RX_CHKSUM_NUM					8
-+
-+#define RX_STATUS_GOOD_FRAME			0
-+#define RX_STATUS_TOO_LONG_GOOD_CRC		1
-+#define RX_STATUS_RUNT_FRAME			2
-+#define RX_STATUS_SFD_NOT_FOUND			3
-+#define RX_STATUS_CRC_ERROR				4
-+#define RX_STATUS_TOO_LONG_BAD_CRC		5
-+#define RX_STATUS_ALIGNMENT_ERROR		6
-+#define RX_STATUS_TOO_LONG_BAD_ALIGN	7
-+#define RX_STATUS_RX_ERR				8
-+#define RX_STATUS_DA_FILTERED			9
-+#define RX_STATUS_BUFFER_FULL			10
-+#define RX_STATUS_NUM					16
-+
-+
-+/**********************************************************************
-+ * GMAC DMA Rx Description Word 1 Register
-+ * GMAC0 offset 0x8064
-+ * GMAC1 offset 0xC064
-+ **********************************************************************/
-+typedef union
-+{
-+	unsigned int bits32;
-+	struct rxdesc_word1
-+	{
-+#if (BIG_ENDIAN==1)
-+		unsigned int	sw_id		: 16;	// bit 31:16	Software ID
-+		unsigned int	byte_count	: 16;	// bit 15: 0	Rx Frame Byte Count
-+#else
-+		unsigned int	byte_count	: 16;	// bit 15: 0	Rx Frame Byte Count
-+		unsigned int	sw_id		: 16;	// bit 31:16	Software ID
-+#endif
-+	} bits;
-+} GMAC_RXDESC_1_T;
-+
-+/**********************************************************************
-+ * GMAC DMA Rx Description Word 2 Register
-+ * GMAC0 offset 0x8068
-+ * GMAC1 offset 0xC068
-+ **********************************************************************/
-+typedef union
-+{
-+	unsigned int	bits32;
-+	unsigned int	buf_adr;
-+} GMAC_RXDESC_2_T;
-+
-+#define RX_INSERT_NONE		0
-+#define RX_INSERT_1_BYTE	1
-+#define RX_INSERT_2_BYTE	2
-+#define RX_INSERT_3_BYTE	3
-+
-+#define RX_INSERT_BYTES		RX_INSERT_2_BYTE
-+/**********************************************************************
-+ * GMAC DMA Rx Description Word 3 Register
-+ * GMAC0 offset 0x806C
-+ * GMAC1 offset 0xC06C
-+ **********************************************************************/
-+typedef union
-+{
-+	unsigned int bits32;
-+	struct rxdesc_word3
-+	{
-+#if (BIG_ENDIAN==1)
-+		unsigned int	sof_eof		: 2;	// bit 31:30 	11: only one, 10: first, 01: last, 00: linking
-+		unsigned int	eofie		: 1;	// bit 29		End of frame interrupt enable
-+		unsigned int	ctrl_flag	: 1;	// bit 28 		Control Flag is present
-+		unsigned int	out_of_seq	: 1;	// bit 27		Out of Sequence packet
-+		unsigned int	option		: 1;	// bit 26		IPV4 option or IPV6 extension header
-+		unsigned int	abnormal	: 1;	// bit 25		abnormal case found
-+		unsigned int	dup_ack		: 1;	// bit 24		Duplicated ACK detected
-+		unsigned int	l7_offset	: 8;	// bit 23: 16	L7 data offset
-+		unsigned int	l4_offset	: 8;	// bit 15: 8	L4 data offset
-+		unsigned int	l3_offset	: 8;	// bit 7: 0		L3 data offset
-+#else
-+		unsigned int	l3_offset	: 8;	// bit 7: 0		L3 data offset
-+		unsigned int	l4_offset	: 8;	// bit 15: 8	L4 data offset
-+		unsigned int	l7_offset	: 8;	// bit 23: 16	L7 data offset
-+		unsigned int	dup_ack		: 1;	// bit 24		Duplicated ACK detected
-+		unsigned int	abnormal	: 1;	// bit 25		abnormal case found
-+		unsigned int	option		: 1;	// bit 26		IPV4 option or IPV6 extension header
-+		unsigned int	out_of_seq	: 1;	// bit 27		Out of Sequence packet
-+		unsigned int	ctrl_flag	: 1;	// bit 28 		Control Flag is present
-+		unsigned int	eofie		: 1;	// bit 29		End of frame interrupt enable
-+		unsigned int	sof_eof		: 2;	// bit 31:30 	11: only one, 10: first, 01: last, 00: linking
-+#endif
-+	} bits;
-+} GMAC_RXDESC_3_T;
-+
-+/**********************************************************************
-+ * GMAC Rx Descriptor
-+ **********************************************************************/
-+typedef struct
-+{
-+	GMAC_RXDESC_0_T	word0;
-+	GMAC_RXDESC_1_T	word1;
-+	GMAC_RXDESC_2_T	word2;
-+	GMAC_RXDESC_3_T	word3;
-+} GMAC_RXDESC_T;
-+
-+/**********************************************************************
-+ * GMAC Hash Engine Enable/Action Register 0 Offset Register
-+ * GMAC0 offset 0x8070
-+ * GMAC1 offset 0xC070
-+ **********************************************************************/
-+typedef union
-+{
-+	unsigned int bits32;
-+	struct bit_8070
-+	{
-+#if (BIG_ENDIAN==1)
-+		unsigned int	mr1en		: 1;	// bit 31		Enable Matching Rule 1
-+		unsigned int	reserved1	: 1;	// bit 30
-+		unsigned int	timing		: 3;	// bit 29:27
-+		unsigned int	mr1_action	: 5;	// bit 26:22	Matching Rule 1 action offset
-+		unsigned int	mr1hel		: 6;	// bit 21:16	match rule 1 hash entry size
-+		unsigned int	mr0en		: 1;	// bit 15		Enable Matching Rule 0
-+		unsigned int	reserved0	: 4;	// bit 14:11
-+		unsigned int	mr0_action	: 5;	// bit 10:6		Matching Rule 0 action offset
-+		unsigned int	mr0hel		: 6;	// bit 5:0		match rule 0 hash entry size
-+#else
-+		unsigned int	mr0hel		: 6;	// bit 5:0		match rule 0 hash entry size
-+		unsigned int	mr0_action	: 5;	// bit 10:6		Matching Rule 0 action offset
-+		unsigned int	reserved0	: 4;	// bit 14:11
-+		unsigned int	mr0en		: 1;	// bit 15		Enable Matching Rule 0
-+		unsigned int	mr1hel		: 6;	// bit 21:16	match rule 1 hash entry size
-+		unsigned int	mr1_action	: 5;	// bit 26:22	Matching Rule 1 action offset
-+		unsigned int	timing		: 3;	// bit 29:27
-+		unsigned int	reserved1	: 1;	// bit 30
-+		unsigned int	mr1en		: 1;	// bit 31		Enable Matching Rule 1
-+#endif
-+	} bits;
-+} GMAC_HASH_ENABLE_REG0_T;
-+
-+/**********************************************************************
-+ * GMAC Hash Engine Enable/Action Register 1 Offset Register
-+ * GMAC0 offset 0x8074
-+ * GMAC1 offset 0xC074
-+ **********************************************************************/
-+typedef union
-+{
-+	unsigned int bits32;
-+	struct bit_8074
-+	{
-+#if (BIG_ENDIAN==1)
-+		unsigned int	mr3en		: 1;	// bit 31		Enable Matching Rule 3
-+		unsigned int	reserved3	: 4;	// bit 30:27
-+		unsigned int	mr3_action	: 5;	// bit 26:22	Matching Rule 3 action offset
-+		unsigned int	mr3hel		: 6;	// bit 21:16	match rule 3 hash entry size
-+		unsigned int	mr2en		: 1;	// bit 15		Enable Matching Rule 2
-+		unsigned int	reserved2	: 4;	// bit 14:11
-+		unsigned int	mr2_action	: 5;	// bit 10:6		Matching Rule 2 action offset
-+		unsigned int	mr2hel		: 6;	// bit 5:0		match rule 2 hash entry size
-+#else
-+		unsigned int	mr2hel		: 6;	// bit 5:0		match rule 2 hash entry size
-+		unsigned int	mr2_action	: 5;	// bit 10:6		Matching Rule 2 action offset
-+		unsigned int	reserved2	: 4;	// bit 14:11
-+		unsigned int	mr2en		: 1;	// bit 15		Enable Matching Rule 2
-+		unsigned int	mr3hel		: 6;	// bit 21:16	match rule 3 hash entry size
-+		unsigned int	mr3_action	: 5;	// bit 26:22	Matching Rule 3 action offset
-+		unsigned int	reserved1	: 4;	// bit 30:27
-+		unsigned int	mr3en		: 1;	// bit 31		Enable Matching Rule 3
-+#endif
-+	} bits;
-+} GMAC_HASH_ENABLE_REG1_T;
-+
-+
-+/**********************************************************************
-+ * GMAC Matching Rule Control Register 0
-+ * GMAC0 offset 0x8078
-+ * GMAC1 offset 0xC078
-+ **********************************************************************/
-+typedef union
-+{
-+	unsigned int bits32;
-+	struct bit_8078
-+	{
-+#if (BIG_ENDIAN==1)
-+		unsigned int	l2			: 1;	// bit 31		L2 matching enable
-+		unsigned int	l3			: 1;	// bit 30		L3 matching enable
-+		unsigned int	l4			: 1;	// bit 29		L4 matching enable
-+		unsigned int	l7			: 1;	// bit 28		L7 matching enable
-+		unsigned int	port		: 1;	// bit 27		PORT ID matching enable
-+		unsigned int	priority	: 3;	// bit 26:24	priority if multi-rules matched
-+		unsigned int	da			: 1;	// bit 23		MAC DA enable
-+		unsigned int	sa			: 1;	// bit 22		MAC SA enable
-+		unsigned int	ether_type	: 1;	// bit 21		Ethernet type enable
-+		unsigned int	vlan		: 1;	// bit 20		VLAN ID enable
-+		unsigned int	pppoe		: 1;	// bit 19		PPPoE Session ID enable
-+		unsigned int	reserved1	: 3;	// bit 18:16
-+		unsigned int	ip_version	: 1;	// bit 15		0: IPV4, 1: IPV6
-+		unsigned int	ip_hdr_len	: 1;	// bit 14		IPV4 Header length
-+		unsigned int	flow_lable	: 1;	// bit 13		IPV6 Flow label
-+		unsigned int	tos_traffic	: 1;	// bit 12		IPV4 TOS or IPV6 Traffice Class
-+		unsigned int	reserved2	: 4;	// bit 11:8
-+		unsigned int	sprx		: 8;	// bit 7:0		Support Protocol Register 7:0
-+#else
-+		unsigned int	sprx		: 8;	// bit 7:0		Support Protocol Register 7:0
-+		unsigned int	reserved2	: 4;	// bit 11:8
-+		unsigned int	tos_traffic	: 1;	// bit 12		IPV4 TOS or IPV6 Traffice Class
-+		unsigned int	flow_lable	: 1;	// bit 13		IPV6 Flow label
-+		unsigned int	ip_hdr_len	: 1;	// bit 14		IPV4 Header length
-+		unsigned int	ip_version	: 1;	// bit 15		0: IPV4, 1: IPV6
-+		unsigned int	reserved1	: 3;	// bit 18:16
-+		unsigned int	pppoe		: 1;	// bit 19		PPPoE Session ID enable
-+		unsigned int	vlan		: 1;	// bit 20		VLAN ID enable
-+		unsigned int	ether_type	: 1;	// bit 21		Ethernet type enable
-+		unsigned int	sa			: 1;	// bit 22		MAC SA enable
-+		unsigned int	da			: 1;	// bit 23		MAC DA enable
-+		unsigned int	priority	: 3;	// bit 26:24	priority if multi-rules matched
-+		unsigned int	port		: 1;	// bit 27		PORT ID matching enable
-+		unsigned int	l7			: 1;	// bit 28		L7 matching enable
-+		unsigned int	l4			: 1;	// bit 29		L4 matching enable
-+		unsigned int	l3			: 1;	// bit 30		L3 matching enable
-+		unsigned int	l2			: 1;	// bit 31		L2 matching enable
-+#endif
-+	} bits;
-+} GMAC_MRxCR0_T;
-+
-+#define MR_L2_BIT			BIT(31)
-+#define MR_L3_BIT			BIT(30)
-+#define MR_L4_BIT			BIT(29)
-+#define MR_L7_BIT			BIT(28)
-+#define MR_PORT_BIT			BIT(27)
-+#define MR_PRIORITY_BIT		BIT(26)
-+#define MR_DA_BIT			BIT(23)
-+#define MR_SA_BIT			BIT(22)
-+#define MR_ETHER_TYPE_BIT	BIT(21)
-+#define MR_VLAN_BIT			BIT(20)
-+#define MR_PPPOE_BIT		BIT(19)
-+#define MR_IP_VER_BIT		BIT(15)
-+#define MR_IP_HDR_LEN_BIT	BIT(14)
-+#define MR_FLOW_LABLE_BIT	BIT(13)
-+#define MR_TOS_TRAFFIC_BIT	BIT(12)
-+#define MR_SPR_BIT(x)		BIT(x)
-+#define MR_SPR_BITS		0xff
-+
-+/**********************************************************************
-+ * GMAC Matching Rule Control Register 1
-+ * GMAC0 offset 0x807C
-+ * GMAC1 offset 0xC07C
-+ **********************************************************************/
-+ typedef union
-+{
-+	unsigned int bits32;
-+	struct bit_807C
-+	{
-+#if (BIG_ENDIAN==1)
-+		unsigned int	sip			: 1;	// bit 31		Srce IP
-+		unsigned int	sip_netmask	: 7;	// bit 30:24	Srce IP net mask, number of mask bits
-+		unsigned int	dip			: 1;	// bit 23		Dest IP
-+		unsigned int	dip_netmask	: 7;	// bit 22:16	Dest IP net mask, number of mask bits
-+		unsigned int    l4_byte0_15	: 16;	// bit 15: 0
-+#else
-+		unsigned int    l4_byte0_15	: 16;	// bit 15: 0
-+		unsigned int	dip_netmask	: 7;	// bit 22:16	Dest IP net mask, number of mask bits
-+		unsigned int	dip			: 1;	// bit 23		Dest IP
-+		unsigned int	sip_netmask	: 7;	// bit 30:24	Srce IP net mask, number of mask bits
-+		unsigned int	sip			: 1;	// bit 31		Srce IP
-+#endif
-+	} bits;
-+} GMAC_MRxCR1_T;
-+
-+/**********************************************************************
-+ * GMAC Matching Rule Control Register 2
-+ * GMAC0 offset 0x8080
-+ * GMAC1 offset 0xC080
-+ **********************************************************************/
-+ typedef union
-+{
-+	unsigned int bits32;
-+	struct bit_8080
-+	{
-+#if (BIG_ENDIAN==1)
-+		unsigned int    l4_byte16_24: 8;	// bit 31: 24
-+		unsigned int    l7_byte0_23	: 24;	// bit 23:0
-+#else
-+		unsigned int    l7_byte0_23	: 24;	// bit 23:0
-+		unsigned int    l4_byte16_24: 8;	// bit 31: 24
-+#endif
-+	} bits;
-+} GMAC_MRxCR2_T;
-+
-+
-+/**********************************************************************
-+ * GMAC Support registers
-+ * GMAC0 offset 0x80A8
-+ * GMAC1 offset 0xC0A8
-+ **********************************************************************/
-+ typedef union
-+{
-+	unsigned int bits32;
-+	struct bit_80A8
-+	{
-+#if (BIG_ENDIAN==1)
-+		unsigned int    reserved: 21;	// bit 31:11
-+		unsigned int    swap	: 3;	// bit 10:8		Swap
-+		unsigned int    protocol: 8;	// bit 7:0		Supported protocol
-+#else
-+		unsigned int    protocol: 8;	// bit 7:0		Supported protocol
-+		unsigned int    swap	: 3;	// bit 10:8		Swap
-+		unsigned int    reserved: 21;	// bit 31:11
-+#endif
-+	} bits;
-+} GMAC_SPR_T;
-+
-+/**********************************************************************
-+ * GMAC_AHB_WEIGHT registers
-+ * GMAC0 offset 0x80C8
-+ * GMAC1 offset 0xC0C8
-+ **********************************************************************/
-+ typedef union
-+{
-+	unsigned int bits32;
-+	struct bit_80C8
-+	{
-+#if (BIG_ENDIAN==1)
-+		unsigned int    reserved		: 7;	// 31:25
-+		unsigned int    tqDV_threshold	: 5;	// 24:20 DMA TqCtrl to Start tqDV FIFO Threshold
-+		unsigned int    pre_req			: 5;	// 19:15 Rx Data Pre Request FIFO Threshold
-+		unsigned int    tx_weight		: 5;	// 14:10
-+		unsigned int    rx_weight		: 5;	// 9:5
-+		unsigned int    hash_weight		: 5;	// 4:0
-+#else
-+		unsigned int    hash_weight		: 5;	// 4:0
-+		unsigned int    rx_weight		: 5;	// 9:5
-+		unsigned int    tx_weight		: 5;	// 14:10
-+		unsigned int    pre_req			: 5;	// 19:15 Rx Data Pre Request FIFO Threshold
-+		unsigned int    tqDV_threshold	: 5;	// 24:20 DMA TqCtrl to Start tqDV FIFO Threshold
-+		unsigned int    reserved		: 7;	// 31:25
-+#endif
-+	} bits;
-+} GMAC_AHB_WEIGHT_T;
-+/**********************************************************************
-+ * the register structure of GMAC
-+ **********************************************************************/
-+
-+/**********************************************************************
-+ * GMAC RX FLTR
-+ * GMAC0 Offset 0xA00C
-+ * GMAC1 Offset 0xE00C
-+ **********************************************************************/
-+typedef union
-+{
-+	unsigned int bits32;
-+	struct bit1_000c
-+	{
-+#if (BIG_ENDIAN==1)
-+		unsigned int 				: 27;
-+		unsigned int error			:  1;	/* enable receive of all error frames */
-+		unsigned int promiscuous	:  1;   /* enable receive of all frames */
-+		unsigned int broadcast		:  1;	/* enable receive of broadcast frames */
-+		unsigned int multicast		:  1;	/* enable receive of multicast frames that pass multicast filter */
-+		unsigned int unicast		:  1;	/* enable receive of unicast frames that are sent to STA address */
-+#else
-+		unsigned int unicast		:  1;	/* enable receive of unicast frames that are sent to STA address */
-+		unsigned int multicast		:  1;	/* enable receive of multicast frames that pass multicast filter */
-+		unsigned int broadcast		:  1;	/* enable receive of broadcast frames */
-+		unsigned int promiscuous	:  1;   /* enable receive of all frames */
-+		unsigned int error			:  1;	/* enable receive of all error frames */
-+		unsigned int 				: 27;
-+#endif
-+	} bits;
-+} GMAC_RX_FLTR_T;
-+
-+/**********************************************************************
-+ * GMAC Configuration 0
-+ * GMAC0 Offset 0xA018
-+ * GMAC1 Offset 0xE018
-+ **********************************************************************/
-+typedef union
-+{
-+	unsigned int bits32;
-+	struct bit1_0018
-+	{
-+#if (BIG_ENDIAN==1)
-+		unsigned int reserved		:  2;	// 31
-+		unsigned int port1_chk_classq :  1;	// 29
-+		unsigned int port0_chk_classq :  1;	// 28
-+		unsigned int port1_chk_toeq	:  1;	// 27
-+		unsigned int port0_chk_toeq	:  1;	// 26
-+		unsigned int port1_chk_hwq	:  1;	// 25
-+		unsigned int port0_chk_hwq	:  1;	// 24
-+		unsigned int rx_err_detect  :  1;	// 23
-+		unsigned int ipv6_exthdr_order: 1;	// 22
-+		unsigned int rxc_inv		:  1;	// 21
-+		unsigned int rgmm_edge		:  1;	// 20
-+        unsigned int rx_tag_remove  :  1;   /* 19: Remove Rx VLAN tag */
-+        unsigned int ipv6_rx_chksum :  1;   /* 18: IPv6 RX Checksum enable */
-+        unsigned int ipv4_rx_chksum :  1;   /* 17: IPv4 RX Checksum enable */
-+        unsigned int rgmii_en       :  1;   /* 16: RGMII in-band status enable */
-+		unsigned int tx_fc_en		:  1;	/* 15: TX flow control enable */
-+		unsigned int rx_fc_en		:  1;	/* 14: RX flow control enable */
-+		unsigned int sim_test		:  1;	/* 13: speed up timers in simulation */
-+		unsigned int dis_col		:  1;	/* 12: disable 16 collisions abort function */
-+		unsigned int dis_bkoff		:  1;	/* 11: disable back-off function */
-+		unsigned int max_len		:  3;	/* 8-10 maximum receive frame length allowed */
-+		unsigned int adj_ifg		:  4;	/* 4-7: adjust IFG from 96+/-56 */
-+        unsigned int flow_ctrl      :  1;   /* 3: flow control also trigged by Rx queues */
-+		unsigned int loop_back		:  1;	/* 2: transmit data loopback enable */
-+		unsigned int dis_rx			:  1;	/* 1: disable receive */
-+		unsigned int dis_tx			:  1;	/* 0: disable transmit */
-+#else
-+		unsigned int dis_tx			:  1;	/* 0: disable transmit */
-+		unsigned int dis_rx			:  1;	/* 1: disable receive */
-+		unsigned int loop_back		:  1;	/* 2: transmit data loopback enable */
-+        unsigned int flow_ctrl      :  1;   /* 3: flow control also trigged by Rx queues */
-+		unsigned int adj_ifg		:  4;	/* 4-7: adjust IFG from 96+/-56 */
-+		unsigned int max_len		:  3;	/* 8-10 maximum receive frame length allowed */
-+		unsigned int dis_bkoff		:  1;	/* 11: disable back-off function */
-+		unsigned int dis_col		:  1;	/* 12: disable 16 collisions abort function */
-+		unsigned int sim_test		:  1;	/* 13: speed up timers in simulation */
-+		unsigned int rx_fc_en		:  1;	/* 14: RX flow control enable */
-+		unsigned int tx_fc_en		:  1;	/* 15: TX flow control enable */
-+        unsigned int rgmii_en       :  1;   /* 16: RGMII in-band status enable */
-+        unsigned int ipv4_rx_chksum :  1;   /* 17: IPv4 RX Checksum enable */
-+        unsigned int ipv6_rx_chksum :  1;   /* 18: IPv6 RX Checksum enable */
-+        unsigned int rx_tag_remove  :  1;   /* 19: Remove Rx VLAN tag */
-+		unsigned int rgmm_edge		:  1;	// 20
-+		unsigned int rxc_inv		:  1;	// 21
-+		unsigned int ipv6_exthdr_order: 1;	// 22
-+		unsigned int rx_err_detect  :  1;	// 23
-+		unsigned int port0_chk_hwq	:  1;	// 24
-+		unsigned int port1_chk_hwq	:  1;	// 25
-+		unsigned int port0_chk_toeq	:  1;	// 26
-+		unsigned int port1_chk_toeq	:  1;	// 27
-+		unsigned int port0_chk_classq :  1;	// 28
-+		unsigned int port1_chk_classq :  1;	// 29
-+		unsigned int reserved		:  2;	// 31
-+#endif
-+	} bits;
-+} GMAC_CONFIG0_T;
-+
-+/**********************************************************************
-+ * GMAC Configuration 1
-+ * GMAC0 Offset 0xA01C
-+ * GMAC1 Offset 0xE01C
-+ **********************************************************************/
-+typedef union
-+{
-+	unsigned int bits32;
-+	struct bit1_001c
-+	{
-+#if (BIG_ENDIAN==1)
-+		unsigned int reserved		: 16;
-+		unsigned int rel_threshold	: 8;	/* flow control release threshold */
-+		unsigned int set_threshold	: 8; 	/* flow control set threshold */
-+#else
-+		unsigned int set_threshold	: 8; 	/* flow control set threshold */
-+		unsigned int rel_threshold	: 8;	/* flow control release threshold */
-+		unsigned int reserved		: 16;
-+#endif
-+	} bits;
-+} GMAC_CONFIG1_T;
-+
-+#define GMAC_FLOWCTRL_SET_MAX		32
-+#define GMAC_FLOWCTRL_SET_MIN		0
-+#define GMAC_FLOWCTRL_RELEASE_MAX	32
-+#define GMAC_FLOWCTRL_RELEASE_MIN	0
-+
-+/**********************************************************************
-+ * GMAC Configuration 2
-+ * GMAC0 Offset 0xA020
-+ * GMAC1 Offset 0xE020
-+ **********************************************************************/
-+typedef union
-+{
-+	unsigned int bits32;
-+	struct bit1_0020
-+	{
-+#if (BIG_ENDIAN==1)
-+		unsigned int rel_threshold	: 16;	/* flow control release threshold */
-+		unsigned int set_threshold	: 16; 	/* flow control set threshold */
-+#else
-+		unsigned int set_threshold	: 16; 	/* flow control set threshold */
-+		unsigned int rel_threshold	: 16;	/* flow control release threshold */
-+#endif
-+	} bits;
-+} GMAC_CONFIG2_T;
-+
-+/**********************************************************************
-+ * GMAC Configuration 3
-+ * GMAC0 Offset 0xA024
-+ * GMAC1 Offset 0xE024
-+ **********************************************************************/
-+typedef union
-+{
-+	unsigned int bits32;
-+	struct bit1_0024
-+	{
-+#if (BIG_ENDIAN==1)
-+		unsigned int rel_threshold	: 16;	/* flow control release threshold */
-+		unsigned int set_threshold	: 16; 	/* flow control set threshold */
-+#else
-+		unsigned int set_threshold	: 16; 	/* flow control set threshold */
-+		unsigned int rel_threshold	: 16;	/* flow control release threshold */
-+#endif
-+	} bits;
-+} GMAC_CONFIG3_T;
-+
-+
-+/**********************************************************************
-+ * GMAC STATUS
-+ * GMAC0 Offset 0xA02C
-+ * GMAC1 Offset 0xE02C
-+ **********************************************************************/
-+typedef union
-+{
-+	unsigned int bits32;
-+	struct bit1_002c
-+	{
-+#if (BIG_ENDIAN==1)
-+		unsigned int 				: 25;
-+		unsigned int mii_rmii		:  2;   /* PHY interface type */
-+		unsigned int reserved		:  1;
-+		unsigned int duplex			:  1;	/* duplex mode */
-+		unsigned int speed			:  2;	/* link speed(00->2.5M 01->25M 10->125M) */
-+		unsigned int link			:  1;	/* link status */
-+#else
-+		unsigned int link			:  1;	/* link status */
-+		unsigned int speed			:  2;	/* link speed(00->2.5M 01->25M 10->125M) */
-+		unsigned int duplex			:  1;	/* duplex mode */
-+		unsigned int reserved		:  1;
-+		unsigned int mii_rmii		:  2;   /* PHY interface type */
-+		unsigned int 				: 25;
-+#endif
-+	} bits;
-+} GMAC_STATUS_T;
-+
-+#define GMAC_SPEED_10			0
-+#define GMAC_SPEED_100			1
-+#define GMAC_SPEED_1000			2
-+
-+#define GMAC_PHY_MII			0
-+#define GMAC_PHY_GMII			1
-+#define GMAC_PHY_RGMII_100		2
-+#define GMAC_PHY_RGMII_1000		3
-+
-+/**********************************************************************
-+ * Queue Header
-+ *	(1) TOE Queue Header
-+ *	(2) Non-TOE Queue Header
-+ *	(3) Interrupt Queue Header
-+ *
-+ * memory Layout
-+ *	TOE Queue Header
-+ *	 0x60003000 +---------------------------+ 0x0000
-+ *				|     TOE Queue 0 Header	|
-+ *				|         8 * 4 Bytes	    |
-+ *				+---------------------------+ 0x0020
-+ *				|     TOE Queue 1 Header  	|
-+ *				|         8 * 4 Bytes		|
-+ *				+---------------------------+ 0x0040
-+ *				|   	......  			|
-+ *				|      						|
-+ *				+---------------------------+
-+ *
-+ *	Non TOE Queue Header
-+ *	 0x60002000 +---------------------------+ 0x0000
-+ *				|   Default Queue 0 Header  |
-+ *				|         2 * 4 Bytes		|
-+ *				+---------------------------+ 0x0008
-+ *				|   Default Queue 1 Header	|
-+ *				|         2 * 4 Bytes		|
-+ *				+---------------------------+ 0x0010
-+ *				|   Classification Queue 0	|
-+ *				|      	  2 * 4 Bytes		|
-+ *				+---------------------------+
-+ *				|   Classification Queue 1	|
-+ *				|      	  2 * 4 Bytes		|
-+ *				+---------------------------+ (n * 8 + 0x10)
-+ *				|   		...				|
-+ *				|      	  2 * 4 Bytes		|
-+ *				+---------------------------+ (13 * 8 + 0x10)
-+ *				|   Classification Queue 13	|
-+ *				|      	  2 * 4 Bytes		|
-+ *				+---------------------------+ 0x80
-+ * 				|      Interrupt Queue 0	|
-+ *				|      	  2 * 4 Bytes		|
-+ *				+---------------------------+
-+ * 				|      Interrupt Queue 1	|
-+ *				|      	  2 * 4 Bytes		|
-+ *				+---------------------------+
-+ * 				|      Interrupt Queue 2	|
-+ *				|      	  2 * 4 Bytes		|
-+ *				+---------------------------+
-+ * 				|      Interrupt Queue 3	|
-+ *				|      	  2 * 4 Bytes		|
-+ *				+---------------------------+
-+ *
-+ **********************************************************************/
-+#define TOE_QUEUE_HDR_ADDR(n)		(TOE_TOE_QUE_HDR_BASE + n * 32)
-+#define TOE_Q_HDR_AREA_END			(TOE_QUEUE_HDR_ADDR(TOE_TOE_QUEUE_MAX+1))
-+#define TOE_DEFAULT_Q0_HDR_BASE		(TOE_NONTOE_QUE_HDR_BASE + 0x00)
-+#define TOE_DEFAULT_Q1_HDR_BASE		(TOE_NONTOE_QUE_HDR_BASE + 0x08)
-+#define TOE_CLASS_Q_HDR_BASE		(TOE_NONTOE_QUE_HDR_BASE + 0x10)
-+#define TOE_INTR_Q_HDR_BASE			(TOE_NONTOE_QUE_HDR_BASE + 0x80)
-+#define INTERRUPT_QUEUE_HDR_ADDR(n)	(TOE_INTR_Q_HDR_BASE + n * 8)
-+#define NONTOE_Q_HDR_AREA_END		(INTERRUPT_QUEUE_HDR_ADDR(TOE_INTR_QUEUE_MAX+1))
-+/**********************************************************************
-+ * TOE Queue Header Word 0
-+ **********************************************************************/
-+typedef union
-+{
-+	unsigned int bits32;
-+	unsigned int base_size;
-+} TOE_QHDR0_T;
-+
-+#define TOE_QHDR0_BASE_MASK 	(~0x0f)
-+
-+/**********************************************************************
-+ * TOE Queue Header Word 1
-+ **********************************************************************/
-+typedef union
-+{
-+	unsigned int bits32;
-+	struct bit_qhdr1
-+	{
-+#if (BIG_ENDIAN==1)
-+
-+		unsigned int wptr			: 16;	// bit 31:16
-+		unsigned int rptr			: 16;	// bit 15:0
-+#else
-+		unsigned int rptr			: 16;	// bit 15:0
-+		unsigned int wptr			: 16;	// bit 31:16
-+#endif
-+	} bits;
-+} TOE_QHDR1_T;
-+
-+/**********************************************************************
-+ * TOE Queue Header Word 2
-+ **********************************************************************/
-+typedef union
-+{
-+	unsigned int bits32;
-+	struct bit_qhdr2
-+	{
-+#if (BIG_ENDIAN==1)
-+
-+		unsigned int usd			: 1;	// bit 31		0: if no data assembled yet
-+		unsigned int ctl			: 1;	// bit 30		1: have control flag bits (except ack)
-+		unsigned int osq			: 1;	// bit 29		1: out of sequence
-+		unsigned int sat			: 1;	// bit 28		1: SeqCnt > SeqThreshold, or AckCnt > AckThreshold
-+		unsigned int ip_opt			: 1;	// bit 27		1: have IPV4 option or IPV6 Extension header
-+		unsigned int tcp_opt		: 1;	// bit 26		1: Have TCP option
-+		unsigned int abn			: 1;	// bit 25		1: Abnormal case Found
-+		unsigned int dack			: 1;	// bit 24		1: Duplicated ACK
-+		unsigned int reserved		: 7;	// bit 23:17
-+		unsigned int TotalPktSize	: 17;	// bit 16: 0	Total packet size
-+#else
-+		unsigned int TotalPktSize	: 17;	// bit 16: 0	Total packet size
-+		unsigned int reserved		: 7;	// bit 23:17
-+		unsigned int dack			: 1;	// bit 24		1: Duplicated ACK
-+		unsigned int abn			: 1;	// bit 25		1: Abnormal case Found
-+		unsigned int tcp_opt		: 1;	// bit 26		1: Have TCP option
-+		unsigned int ip_opt			: 1;	// bit 27		1: have IPV4 option or IPV6 Extension header
-+		unsigned int sat			: 1;	// bit 28		1: SeqCnt > SeqThreshold, or AckCnt > AckThreshold
-+		unsigned int osq			: 1;	// bit 29		1: out of sequence
-+		unsigned int ctl			: 1;	// bit 30		1: have control flag bits (except ack)
-+		unsigned int usd			: 1;	// bit 31		0: if no data assembled yet
-+#endif
-+	} bits;
-+} TOE_QHDR2_T;
-+
-+/**********************************************************************
-+ * TOE Queue Header Word 3
-+ **********************************************************************/
-+typedef union
-+{
-+	unsigned int bits32;
-+	unsigned int seq_num;
-+} TOE_QHDR3_T;
-+
-+/**********************************************************************
-+ * TOE Queue Header Word 4
-+ **********************************************************************/
-+typedef union
-+{
-+	unsigned int bits32;
-+	unsigned int ack_num;
-+} TOE_QHDR4_T;
-+
-+/**********************************************************************
-+ * TOE Queue Header Word 5
-+ **********************************************************************/
-+typedef union
-+{
-+	unsigned int bits32;
-+	struct bit_qhdr5
-+	{
-+#if (BIG_ENDIAN==1)
-+
-+		unsigned int SeqCnt		: 16;	// bit 31:16
-+		unsigned int AckCnt		: 16;	// bit 15:0
-+#else
-+		unsigned int AckCnt		: 16;	// bit 15:0
-+		unsigned int SeqCnt		: 16;	// bit 31:16
-+#endif
-+	} bits;
-+} TOE_QHDR5_T;
-+
-+/**********************************************************************
-+ * TOE Queue Header Word 6
-+ **********************************************************************/
-+typedef union
-+{
-+	unsigned int bits32;
-+	struct bit_qhdr6
-+	{
-+#if (BIG_ENDIAN==1)
-+
-+		unsigned int MaxPktSize	: 14;	// bit 31:18
-+		unsigned int iq_num		: 2;	// bit 17:16
-+		unsigned int WinSize	: 16;	// bit 15:0
-+#else
-+		unsigned int WinSize	: 16;	// bit 15:0
-+		unsigned int iq_num		: 2;	// bit 17:16
-+		unsigned int MaxPktSize	: 14;	// bit 31:18
-+#endif
-+	} bits;
-+} TOE_QHDR6_T;
-+
-+/**********************************************************************
-+ * TOE Queue Header Word 7
-+ **********************************************************************/
-+typedef union
-+{
-+	unsigned int bits32;
-+	struct bit_qhdr7
-+	{
-+#if (BIG_ENDIAN==1)
-+
-+		unsigned int SeqThreshold	: 16;	// bit 31:16
-+		unsigned int AckThreshold	: 16;	// bit 15:0
-+#else
-+		unsigned int AckThreshold	: 16;	// bit 15:0
-+		unsigned int SeqThreshold	: 16;	// bit 31:16
-+#endif
-+	} bits;
-+} TOE_QHDR7_T;
-+
-+/**********************************************************************
-+ * TOE Queue Header
-+ **********************************************************************/
-+typedef struct
-+{
-+	TOE_QHDR0_T		word0;
-+	TOE_QHDR1_T		word1;
-+	TOE_QHDR2_T		word2;
-+	TOE_QHDR3_T		word3;
-+	TOE_QHDR4_T		word4;
-+	TOE_QHDR5_T		word5;
-+	TOE_QHDR6_T		word6;
-+	TOE_QHDR7_T		word7;
-+} TOE_QHDR_T;
-+
-+/**********************************************************************
-+ * NONTOE Queue Header Word 0
-+ **********************************************************************/
-+typedef union
-+{
-+	unsigned int bits32;
-+	unsigned int base_size;
-+} NONTOE_QHDR0_T;
-+
-+#define NONTOE_QHDR0_BASE_MASK 	(~0x0f)
-+
-+/**********************************************************************
-+ * NONTOE Queue Header Word 1
-+ **********************************************************************/
-+typedef union
-+{
-+	unsigned int bits32;
-+	struct bit_nonqhdr1
-+	{
-+#if (BIG_ENDIAN==1)
-+
-+		unsigned int wptr			: 16;	// bit 31:16
-+		unsigned int rptr			: 16;	// bit 15:0
-+#else
-+		unsigned int rptr			: 16;	// bit 15:0
-+		unsigned int wptr			: 16;	// bit 31:16
-+#endif
-+	} bits;
-+} NONTOE_QHDR1_T;
-+
-+/**********************************************************************
-+ * Non-TOE Queue Header
-+ **********************************************************************/
-+typedef struct
-+{
-+	NONTOE_QHDR0_T		word0;
-+	NONTOE_QHDR1_T		word1;
-+} NONTOE_QHDR_T;
-+
-+/**********************************************************************
-+ * Interrupt Queue Header Word 0
-+ **********************************************************************/
-+typedef union
-+{
-+	unsigned int bits32;
-+	struct bit_intrqhdr0
-+	{
-+#if (BIG_ENDIAN==1)
-+
-+		unsigned int wptr		: 16;	// bit 31:16	Write Pointer where hw stopped
-+		unsigned int win_size	: 16;	// bit 15:0 	Descriptor Ring Size
-+#else
-+		unsigned int win_size	: 16;	// bit 15:0 	Descriptor Ring Size
-+		unsigned int wptr		: 16;	// bit 31:16	Write Pointer where hw stopped
-+#endif
-+	} bits;
-+} INTR_QHDR0_T;
-+
-+/**********************************************************************
-+ * Interrupt Queue Header Word 1
-+ **********************************************************************/
-+typedef union
-+{
-+	unsigned int bits32;
-+	struct bit_intrqhdr1
-+	{
-+#if (BIG_ENDIAN==1)
-+
-+		unsigned int ctl			: 1;	// bit 31		1: have control flag bits (except ack)
-+		unsigned int osq			: 1;	// bit 30		1: out of sequence
-+		unsigned int sat			: 1;	// bit 29		1: SeqCnt > SeqThreshold, or AckCnt > AckThreshold
-+		unsigned int ip_opt			: 1;	// bit 28		1: have IPV4 option or IPV6 Extension header
-+		unsigned int tcp_opt		: 1;	// bit 27		1: Have TCP option
-+		unsigned int abn			: 1;	// bit 26		1: Abnormal case Found
-+		unsigned int dack			: 1;	// bit 25		1: Duplicated ACK
-+		unsigned int tcp_qid		: 8;	// bit 24:17	TCP Queue ID
-+		unsigned int TotalPktSize	: 17;	// bit 16: 0	Total packet size
-+#else
-+		unsigned int TotalPktSize	: 17;	// bit 16: 0	Total packet size
-+		unsigned int tcp_qid		: 8;	// bit 24:17	TCP Queue ID
-+		unsigned int dack			: 1;	// bit 25		1: Duplicated ACK
-+		unsigned int abn			: 1;	// bit 26		1: Abnormal case Found
-+		unsigned int tcp_opt		: 1;	// bit 27		1: Have TCP option
-+		unsigned int ip_opt			: 1;	// bit 28		1: have IPV4 option or IPV6 Extension header
-+		unsigned int sat			: 1;	// bit 29		1: SeqCnt > SeqThreshold, or AckCnt > AckThreshold
-+		unsigned int osq			: 1;	// bit 30		1: out of sequence
-+		unsigned int ctl			: 1;	// bit 31		1: have control flag bits (except ack)
-+#endif
-+	} bits;
-+} INTR_QHDR1_T;
-+
-+/**********************************************************************
-+ * Interrupt Queue Header Word 2
-+ **********************************************************************/
-+typedef union
-+{
-+	unsigned int bits32;
-+	unsigned int seq_num;
-+} INTR_QHDR2_T;
-+
-+/**********************************************************************
-+ * Interrupt Queue Header Word 3
-+ **********************************************************************/
-+typedef union
-+{
-+	unsigned int bits32;
-+	unsigned int ack_num;
-+} INTR_QHDR3_T;
-+
-+/**********************************************************************
-+ * Interrupt Queue Header Word 4
-+ **********************************************************************/
-+typedef union
-+{
-+	unsigned int bits32;
-+	struct bit_intrqhdr4
-+	{
-+#if (BIG_ENDIAN==1)
-+
-+		unsigned int SeqCnt		: 16;	// bit 31:16	Seq# change since last seq# intr.
-+		unsigned int AckCnt		: 16;	// bit 15:0     Ack# change since last ack# intr.
-+#else
-+		unsigned int AckCnt		: 16;	// bit 15:0		Ack# change since last ack# intr.
-+		unsigned int SeqCnt		: 16;	// bit 31:16	Seq# change since last seq# intr.
-+#endif
-+	} bits;
-+} INTR_QHDR4_T;
-+
-+/**********************************************************************
-+ * Interrupt Queue Header
-+ **********************************************************************/
-+typedef struct
-+{
-+	INTR_QHDR0_T		word0;
-+	INTR_QHDR1_T		word1;
-+	INTR_QHDR2_T		word2;
-+	INTR_QHDR3_T		word3;
-+	INTR_QHDR4_T		word4;
-+	unsigned int		word5;
-+	unsigned int		word6;
-+	unsigned int		word7;
-+} INTR_QHDR_T;
-+
-+/**********************************************************************
-+ * GMAC Conf
-+ **********************************************************************/
-+typedef struct gmac_conf {
-+	struct net_device *dev;
-+	int portmap;
-+	int vid;
-+	int flag;     /* 1: active  0: non-active */
-+} sys_gmac_conf;
-+
-+/**********************************************************************
-+ * GMAC private data
-+ **********************************************************************/
-+typedef struct {
-+	unsigned int		rwptr_reg;
-+	unsigned int		desc_base;
-+	unsigned int		total_desc_num;
-+	unsigned short		finished_idx;
-+	GMAC_TXDESC_T		*curr_tx_desc;
-+	GMAC_TXDESC_T		*curr_finished_desc;
-+	struct sk_buff		*tx_skb[TX_DESC_NUM];
-+	unsigned long		total_sent;
-+	unsigned long		total_finished;
-+	unsigned long		intr_cnt;
-+} GMAC_SWTXQ_T;
-+
-+typedef struct {
-+	unsigned int		desc_base;
-+	unsigned long 		eof_cnt;
-+} GMAC_HWTXQ_T;
-+
-+typedef struct gmac_private{
-+	struct net_device	*dev;
-+	unsigned int		existed;
-+	unsigned int		port_id;	// 0 or 1
-+	unsigned int		base_addr;
-+	unsigned int		dma_base_addr;
-+	unsigned char		*mac_addr1;
-+	unsigned char		*mac_addr2;
-+	unsigned int		swtxq_desc_base;
-+	unsigned int		hwtxq_desc_base;
-+	GMAC_SWTXQ_T		swtxq[TOE_SW_TXQ_NUM];
-+	GMAC_HWTXQ_T		hwtxq[TOE_HW_TXQ_NUM];
-+	NONTOE_QHDR_T		*default_qhdr;
-+	unsigned int		default_desc_base;
-+	unsigned int		default_desc_num;
-+	unsigned int		rx_curr_desc;
-+	DMA_RWPTR_T			rx_rwptr;
-+	struct sk_buff		*curr_rx_skb;
-+	dma_addr_t			default_desc_base_dma;
-+	dma_addr_t			swtxq_desc_base_dma;
-+	dma_addr_t			hwtxq_desc_base_dma;
-+	unsigned int		irq;
-+	unsigned int		flow_control_enable	;
-+	unsigned int		pre_phy_status;
-+	unsigned int		full_duplex_cfg;
-+	unsigned int		speed_cfg;
-+	unsigned int		auto_nego_cfg;
-+	unsigned int		full_duplex_status;
-+	unsigned int		speed_status;
-+	unsigned int		phy_mode;	/* 0->MII 1->GMII 2->RGMII(10/100) 3->RGMII(1000) */
-+	unsigned int		phy_addr;
-+	unsigned int		intr0_enabled;	// 1: enabled
-+	unsigned int		intr1_enabled;	// 1: enabled
-+	unsigned int		intr2_enabled;	// 1: enabled
-+	unsigned int		intr3_enabled;	// 1: enabled
-+	unsigned int		intr4_enabled;	// 1: enabled
-+//	unsigned int		intr4_enabled_1;	// 1: enabled
-+	unsigned int		intr0_selected;	// 1: selected
-+	unsigned int		intr1_selected;	// 1: selected
-+	unsigned int		intr2_selected;	// 1: selected
-+	unsigned int		intr3_selected;	// 1: selected
-+	unsigned int		intr4_selected;	// 1: selected
-+	// void 				(*gmac_rcv_handler)(struct sk_buff *, int);
-+	struct net_device_stats ifStatics;
-+	unsigned long		txDerr_cnt[GMAC_NUM];
-+	unsigned long		txPerr_cnt[GMAC_NUM];
-+	unsigned long		RxDerr_cnt[GMAC_NUM];
-+	unsigned long		RxPerr_cnt[GMAC_NUM];
-+	unsigned int		isr_rx_cnt;
-+	unsigned int		isr_tx_cnt;
-+	unsigned long		rx_discard;
-+	unsigned long		rx_error;
-+	unsigned long		rx_mcast;
-+	unsigned long		rx_bcast;
-+	unsigned long		rx_status_cnt[8];
-+	unsigned long		rx_chksum_cnt[8];
-+	unsigned long		rx_sta1_ucast;	// for STA 1 MAC Address
-+	unsigned long		rx_sta2_ucast;	// for STA 2 MAC Address
-+	unsigned long		mib_full_cnt;
-+	unsigned long		rx_pause_on_cnt;
-+	unsigned long		tx_pause_on_cnt;
-+	unsigned long		rx_pause_off_cnt;
-+	unsigned long		tx_pause_off_cnt;
-+	unsigned long		rx_overrun_cnt;
-+	unsigned long		status_changed_cnt;
-+	unsigned long		default_q_cnt;
-+	unsigned long		hw_fq_empty_cnt;
-+	unsigned long		sw_fq_empty_cnt;
-+	unsigned long		default_q_intr_cnt;
-+	pid_t               thr_pid;
-+	wait_queue_head_t   thr_wait;
-+	struct completion   thr_exited;
-+    spinlock_t          lock;
-+    int                 time_to_die;
-+    int					operation;
-+#ifdef SL351x_GMAC_WORKAROUND
-+    unsigned long		short_frames_cnt;
-+#endif
-+}GMAC_INFO_T ;
-+
-+typedef struct toe_private {
-+	unsigned int	swfq_desc_base;
-+	unsigned int	hwfq_desc_base;
-+	unsigned int	hwfq_buf_base;
-+//	unsigned int	toe_desc_base[TOE_TOE_QUEUE_NUM];
-+//	unsigned int	toe_desc_num;
-+//	unsigned int	class_desc_base;
-+//	unsigned int	class_desc_num;
-+//	unsigned int	intr_desc_base;
-+//	unsigned int	intr_desc_num;
-+//	unsigned int	intr_buf_base;
-+	DMA_RWPTR_T		fq_rx_rwptr;
-+	GMAC_INFO_T		gmac[GMAC_NUM];
-+	dma_addr_t		sw_freeq_desc_base_dma;
-+	dma_addr_t		hw_freeq_desc_base_dma;
-+	dma_addr_t		hwfq_buf_base_dma;
-+	dma_addr_t		hwfq_buf_end_dma;
-+//	dma_addr_t		toe_desc_base_dma[TOE_TOE_QUEUE_NUM];
-+//	dma_addr_t		class_desc_base_dma;
-+//	dma_addr_t		intr_desc_base_dma;
-+//	dma_addr_t		intr_buf_base_dma;
-+//	unsigned long	toe_iq_intr_full_cnt[TOE_INTR_QUEUE_NUM];
-+//	unsigned long	toe_iq_intr_cnt[TOE_INTR_QUEUE_NUM];
-+//	unsigned long	toe_q_intr_full_cnt[TOE_TOE_QUEUE_NUM];
-+//	unsigned long	class_q_intr_full_cnt[TOE_CLASS_QUEUE_NUM];
-+//	unsigned long	class_q_intr_cnt[TOE_CLASS_QUEUE_NUM];
-+} TOE_INFO_T;
-+
-+extern TOE_INFO_T toe_private_data;
-+
-+#define GMAC_PORT0	0
-+#define GMAC_PORT1	1
-+/**********************************************************************
-+ * PHY Definition
-+ **********************************************************************/
-+#define HPHY_ADDR   			0x01
-+#define GPHY_ADDR   			0x02
-+
-+enum phy_state
-+{
-+    LINK_DOWN   = 0,
-+    LINK_UP     = 1
-+};
-+
-+/* transmit timeout value */
-+
-+#endif //_GMAC_SL351x_H
---- /dev/null
-+++ b/include/asm-arm/arch-sl2312/sl351x_hash_cfg.h
-@@ -0,0 +1,365 @@
-+/*-----------------------------------------------------------------------------------
-+*	sl351x_hash_cfg.h
-+*
-+*	Description:
-+*	
-+*	History:
-+*
-+*	9/14/2005	Gary Chen	Create
-+*
-+*-------------------------------------------------------------------------------------*/
-+#ifndef _SL351x_HASH_CFG_H_
-+#define _SL351x_HASH_CFG_H_	1
-+
-+// #define NAT_DEBUG_MSG	1
-+// #define DEBUG_NAT_MIXED_HW_SW_TX	1
-+#ifdef DEBUG_NAT_MIXED_HW_SW_TX
-+	// #define NAT_DEBUG_LAN_HASH_TIMEOUT	1
-+	// #define NAT_DEBUG_WAN_HASH_TIMEOUT	1
-+#endif
-+
-+#define IPIV(a,b,c,d)		((a<<24)+(b<<16)+(c<<8)+d)
-+#define	IPIV1(a)			((a>>24)&0xff)
-+#define	IPIV2(a)			((a>>16)&0xff)
-+#define IPIV3(a)			((a>>8)&0xff)
-+#define IPIV4(a)			((a)&0xff)
-+
-+#define HASH_MAX_BYTES			64	// 128
-+#define HASH_ACTION_DWORDS		9
-+#define HASH_MAX_DWORDS			(HASH_MAX_BYTES / sizeof(u32))
-+#define HASH_MAX_KEY_DWORD		(HASH_MAX_DWORDS - HASH_ACTION_DWORDS)
-+#define HASH_INIT_KEY			0x534C4F52
-+#define HASH_BITS				12	// 12 : Normal, 7: Simulation
-+#define HASH_TOTAL_ENTRIES		(1 << HASH_BITS)
-+#define HASH_MAX_ENTRIES		(1 << 12)
-+#define HASH_TOE_ENTRIES		(HASH_TOTAL_ENTRIES >> 5)
-+#define HASH_BITS_MASK			((1 << HASH_BITS) - 1)
-+
-+#define hash_lock(lock)			// spin_lock_bh(lock)
-+#define hash_unlock(lock)		// spin_unlock_bh(lock)
-+
-+/*----------------------------------------------------------------------
-+ *  special macro
-+ ----------------------------------------------------------------------*/
-+#define HASH_PUSH_WORD(cp, data)	{*cp++ = (((u16)(data))     ) & 0xff; 	\
-+							 		*cp++ = (((u16)(data)) >> 8) & 0xff;} 
-+#define HASH_PUSH_DWORD(cp, data)	{*cp++ = (u8)(((u32)(data))      ) & 0xff;	\
-+							  		*cp++ = (u8)(((u32)(data)) >>  8) & 0xff;	\
-+							  		*cp++ = (u8)(((u32)(data)) >> 16) & 0xff;	\
-+							  		*cp++ = (u8)(((u32)(data)) >> 24) & 0xff;}
-+#define HASH_PUSH_BYTE(cp, data)	{*cp++ = ((u8)(data)) & 0xff;}
-+
-+/*----------------------------------------------------------------------
-+ *  key
-+ ----------------------------------------------------------------------*/
-+typedef struct {
-+	u8		port;
-+	u16		Ethertype;
-+	u8		da[6];
-+	u8		sa[6];
-+	u16		pppoe_sid;	
-+	u16		vlan_id;	
-+	u8		ipv4_hdrlen;	
-+	u8		ip_tos;	
-+	u8		ip_protocol;	
-+	u32		ipv6_flow_label;
-+	u8		sip[16];
-+	u8		dip[16];
-+	//__u32			sip[4];
-+	//__u32			dip[4];
-+	u8		l4_bytes[24];
-+	u8		l7_bytes[24];
-+	u8		ipv6;	// 1: IPv6, 0: IPV4
-+} ENTRY_KEY_T;
-+
-+/*----------------------------------------------------------------------
-+ *  key for NAT
-+ *	Note: packed
-+ ----------------------------------------------------------------------*/
-+typedef struct {
-+	u16		Ethertype;		// not used
-+	u8		port_id;
-+	u8		rule_id;
-+	u8		ip_protocol;
-+	u8		reserved1;		// ip_tos, not used
-+	u16		reserved2;		// not used
-+	u32		sip;
-+	u32		dip;
-+	u16		sport;
-+	u16		dport;
-+} NAT_KEY_T;
-+
-+#define NAT_KEY_DWORD_SIZE	(sizeof(NAT_KEY_T)/sizeof(u32))
-+#define NAT_KEY_SIZE		(sizeof(NAT_KEY_T))
-+
-+/*----------------------------------------------------------------------
-+ *  key for NAT
-+ *	Note: packed
-+ ----------------------------------------------------------------------*/
-+typedef struct {
-+	u16		Ethertype;		// not used
-+	u8		port_id;
-+	u8		rule_id;
-+	u8		ip_protocol;
-+	u8		reserved1;		// ip_tos, not used
-+	u16		reserved2;		// not used
-+	u32		sip;
-+	u32		dip;
-+	u16		reserved3;
-+	u16		protocol;
-+	u16		reserved4;
-+	u16		call_id;
-+} GRE_KEY_T;
-+
-+#define GRE_KEY_DWORD_SIZE	(sizeof(GRE_KEY_T)/sizeof(u32))
-+#define GRE_KEY_SIZE		(sizeof(GRE_KEY_T))
-+/*----------------------------------------------------------------------
-+ *  key present or not
-+ ----------------------------------------------------------------------*/
-+typedef struct {
-+	u32		port			: 1;
-+	u32		Ethertype		: 1;
-+	u32		da				: 1;
-+	u32		sa				: 1;
-+	u32		pppoe_sid		: 1;	
-+	u32		vlan_id			: 1;	
-+	u32		ipv4_hdrlen		: 1;	
-+	u32		ip_tos			: 1;
-+	u32		ip_protocol		: 1;	
-+	u32		ipv6_flow_label	: 1;
-+	u32		sip				: 1;
-+	u32		dip				: 1;
-+	u32		l4_bytes_0_3	: 1;
-+	u32		l4_bytes_4_7	: 1;
-+	u32		l4_bytes_8_11	: 1;
-+	u32		l4_bytes_12_15	: 1;
-+	u32		l4_bytes_16_19	: 1;
-+	u32		l4_bytes_20_23	: 1;
-+	u32		l7_bytes_0_3	: 1;
-+	u32		l7_bytes_4_7	: 1;
-+	u32		l7_bytes_8_11	: 1;
-+	u32		l7_bytes_12_15	: 1;
-+	u32		l7_bytes_16_19	: 1;
-+	u32		l7_bytes_20_23	: 1;
-+	u32		reserved		: 8;
-+} KEY_FIELD_T;
-+
-+/*----------------------------------------------------------------------
-+ *  action
-+ ----------------------------------------------------------------------*/
-+typedef struct {
-+	u32		reserved0	: 5;	// bit 0:4
-+	u32		pppoe		: 2;	// bit 5:6
-+	u32		vlan		: 2;	// bit 7:8
-+	u32		sa			: 1;	// bit 9
-+	u32		da			: 1;	// bit 10
-+	u32		Dport		: 1;	// bit 11
-+	u32		Sport		: 1;	// bit 12
-+	u32		Dip			: 1;	// bit 13
-+	u32		Sip			: 1;	// bit 14
-+	u32		sw_id		: 1;	// bit 15
-+	u32		frag		: 1;	// bit 16
-+	u32		option		: 1;	// bit 17
-+	u32		ttl_0		: 1;	// bit 18
-+	u32		ttl_1		: 1;	// bit 19
-+	u32		mtu			: 1;	// bit 20
-+	u32		exception	: 1;	// bit 21
-+	u32		srce_qid	: 1;	// bit 22
-+	u32		discard		: 1;	// bit 23
-+	u32		dest_qid	: 8;	// bit 24:31
-+} ENTRY_ACTION_T;
-+
-+#define ACTION_DISCARD_BIT		BIT(23)
-+#define ACTION_SRCE_QID_BIT		BIT(22)
-+#define ACTION_EXCEPTION_BIT	BIT(21)
-+#define ACTION_MTU_BIT			BIT(20)
-+#define ACTION_TTL_1_BIT		BIT(19)
-+#define ACTION_TTL_0_BIT		BIT(18)
-+#define ACTION_IP_OPTION		BIT(17)
-+#define ACTION_FRAG_BIT			BIT(16)
-+#define ACTION_SWID_BIT			BIT(15)
-+#define ACTION_SIP_BIT			BIT(14)
-+#define ACTION_DIP_BIT			BIT(13)
-+#define ACTION_SPORT_BIT		BIT(12)
-+#define ACTION_DPORT_BIT		BIT(11)
-+#define ACTION_DA_BIT			BIT(10)
-+#define ACTION_SA_BIT			BIT(9)
-+#define ACTION_VLAN_DEL_BIT		BIT(8)
-+#define ACTION_VLAN_INS_BIT		BIT(7)
-+#define ACTION_PPPOE_DEL_BIT	BIT(6)
-+#define ACTION_PPPOE_INS_BIT	BIT(5)
-+#define ACTION_L4_THIRD_BIT		BIT(4)
-+#define ACTION_L4_FOURTH_BIT	BIT(3)
-+
-+#define NAT_ACTION_BITS			(ACTION_SRCE_QID_BIT  | ACTION_EXCEPTION_BIT |	\
-+								ACTION_TTL_1_BIT | ACTION_TTL_0_BIT | 			\
-+								ACTION_IP_OPTION | ACTION_FRAG_BIT |			\
-+								ACTION_DA_BIT | ACTION_SA_BIT)
-+#define NAT_LAN2WAN_ACTIONS		(NAT_ACTION_BITS | ACTION_SIP_BIT | ACTION_SPORT_BIT)
-+#define NAT_WAN2LAN_ACTIONS		(NAT_ACTION_BITS | ACTION_DIP_BIT | ACTION_DPORT_BIT)
-+#define NAT_PPPOE_LAN2WAN_ACTIONS	(NAT_LAN2WAN_ACTIONS | ACTION_PPPOE_INS_BIT)
-+#define NAT_PPPOE_WAN2LAN_ACTIONS	(NAT_WAN2LAN_ACTIONS | ACTION_PPPOE_DEL_BIT)
-+#define NAT_PPTP_LAN2WAN_ACTIONS	(NAT_ACTION_BITS | ACTION_SIP_BIT | ACTION_L4_FOURTH_BIT)
-+#define NAT_PPTP_WAN2LAN_ACTIONS	(NAT_ACTION_BITS | ACTION_DIP_BIT | ACTION_L4_FOURTH_BIT)
-+#define NAT_PPPOE_PPTP_LAN2WAN_ACTIONS	(NAT_PPTP_LAN2WAN_ACTIONS | ACTION_PPPOE_INS_BIT)
-+#define NAT_PPPOE_PPTP_WAN2LAN_ACTIONS	(NAT_PPTP_WAN2LAN_ACTIONS | ACTION_PPPOE_DEL_BIT)
-+								
-+/*----------------------------------------------------------------------
-+ *  parameter
-+ ----------------------------------------------------------------------*/
-+typedef struct {
-+	u8		da[6];
-+	u8		sa[6];
-+	u16		vlan;	
-+	u16  	pppoe;	
-+	u32		Sip;
-+	u32		Dip;
-+	u16  	Sport;	
-+	u16  	Dport;	
-+	u16  	sw_id;	
-+	u16  	mtu;	
-+} ENTRY_PARAM_T;
-+
-+/*----------------------------------------------------------------------
-+ *  Hash Entry
-+ ----------------------------------------------------------------------*/
-+typedef struct {
-+	char			rule;
-+	ENTRY_KEY_T		key;
-+	KEY_FIELD_T		key_present;
-+	ENTRY_ACTION_T	action;
-+	ENTRY_PARAM_T	param;
-+	int				index;
-+	int				total_dwords;
-+} HASH_ENTRY_T;
-+
-+/*----------------------------------------------------------------------
-+ *  NAT Hash Entry
-+ ----------------------------------------------------------------------*/
-+typedef struct {
-+	short	counter;
-+	short	interval;
-+} HASH_TIMEOUT_T;
-+
-+/*----------------------------------------------------------------------
-+ *  NAT Hash Entry for TCP/UDP protocol
-+ ----------------------------------------------------------------------*/
-+typedef struct {
-+	NAT_KEY_T			key;
-+	union {
-+		u32				dword;
-+		ENTRY_ACTION_T	bits;
-+	} action;
-+	ENTRY_PARAM_T		param;
-+	HASH_TIMEOUT_T		tmo;	// used by software only, to use memory space efficiently
-+} NAT_HASH_ENTRY_T;
-+
-+#define NAT_HASH_ENTRY_SIZE		(sizeof(NAT_HASH_ENTRY_T))
-+
-+/*----------------------------------------------------------------------
-+ *  GRE Hash Entry for PPTP/GRE protocol
-+ ----------------------------------------------------------------------*/
-+typedef struct {
-+	GRE_KEY_T			key;
-+	union {
-+		u32				dword;
-+		ENTRY_ACTION_T	bits;
-+	} action;
-+	ENTRY_PARAM_T		param;
-+	HASH_TIMEOUT_T		tmo;	// used by software only, to use memory space efficiently
-+} GRE_HASH_ENTRY_T;
-+
-+#define GRE_HASH_ENTRY_SIZE		(sizeof(GRE_HASH_ENTRY_T))
-+
-+/*----------------------------------------------------------------------
-+ *  External Variables
-+ ----------------------------------------------------------------------*/
-+extern char				hash_tables[HASH_TOTAL_ENTRIES][HASH_MAX_BYTES] __attribute__ ((aligned(16)));
-+extern u32				hash_nat_owner_bits[HASH_TOTAL_ENTRIES/32];
-+/*----------------------------------------------------------------------
-+* hash_get_valid_flag
-+*----------------------------------------------------------------------*/
-+static inline int hash_get_valid_flag(int index)
-+{
-+	volatile u32 *hash_valid_bits_ptr = (volatile u32 *)TOE_V_BIT_BASE;
-+
-+#ifdef SL351x_GMAC_WORKAROUND
-+	if (index >= (0x80 * 8) && index < (0x8c * 8))
-+		return 1;
-+#endif	
-+	return (hash_valid_bits_ptr[index/32] & (1 << (index %32)));
-+}
-+
-+/*----------------------------------------------------------------------
-+* hash_get_nat_owner_flag
-+*----------------------------------------------------------------------*/
-+static inline int hash_get_nat_owner_flag(int index)
-+{
-+	return (hash_nat_owner_bits[index/32] & (1 << (index %32)));
-+}
-+
-+/*----------------------------------------------------------------------
-+* hash_validate_entry
-+*----------------------------------------------------------------------*/
-+static inline void hash_validate_entry(int index)
-+{
-+	volatile u32	*hash_valid_bits_ptr = (volatile u32 *)TOE_V_BIT_BASE;
-+	register int	ptr = index/32, bits = 1 << (index %32);
-+	
-+	hash_valid_bits_ptr[ptr] |= bits;
-+}
-+
-+/*----------------------------------------------------------------------
-+* hash_invalidate_entry
-+*----------------------------------------------------------------------*/
-+static inline void hash_invalidate_entry(int index)
-+{
-+	volatile u32 *hash_valid_bits_ptr = (volatile u32 *)TOE_V_BIT_BASE;
-+	register int	ptr = index/32, bits = 1 << (index %32);
-+	
-+	hash_valid_bits_ptr[ptr] &= ~(bits);
-+}
-+
-+/*----------------------------------------------------------------------
-+* hash_nat_enable_owner
-+*----------------------------------------------------------------------*/
-+static inline void hash_nat_enable_owner(int index)
-+{
-+	hash_nat_owner_bits[index/32] |= (1 << (index % 32));
-+}
-+
-+/*----------------------------------------------------------------------
-+* hash_nat_disable_owner
-+*----------------------------------------------------------------------*/
-+static inline void hash_nat_disable_owner(int index)
-+{
-+	hash_nat_owner_bits[index/32] &= ~(1 << (index % 32));
-+}
-+
-+/*----------------------------------------------------------------------
-+* hash_get_entry
-+*----------------------------------------------------------------------*/
-+static inline void *hash_get_entry(int index)
-+{
-+	return (void*) &hash_tables[index][0];
-+}
-+
-+/*----------------------------------------------------------------------
-+* Functions
-+*----------------------------------------------------------------------*/
-+extern int hash_add_entry(HASH_ENTRY_T *entry);
-+extern void sl351x_hash_init(void);
-+extern void hash_set_valid_flag(int index, int valid);
-+extern void hash_set_nat_owner_flag(int index, int valid);
-+extern void *hash_get_entry(int index);
-+extern int hash_build_keys(u32 *destp, HASH_ENTRY_T *entry);
-+extern void hash_build_nat_keys(u32 *destp, HASH_ENTRY_T *entry);
-+extern int hash_write_entry(HASH_ENTRY_T *entry, u8 *key);
-+extern int hash_add_entry(HASH_ENTRY_T *entry);
-+extern	u16 hash_crc16(u16 crc, u8 *datap, u32 len);
-+extern	u16 hash_gen_crc16(u8 *datap, u32 len);
-+
-+#endif // _SL351x_HASH_CFG_H_
-+
-+
-+
---- /dev/null
-+++ b/include/asm-arm/arch-sl2312/sl351x_nat_cfg.h
-@@ -0,0 +1,211 @@
-+/**************************************************************************
-+* Copyright 2006 StorLink Semiconductors, Inc.  All rights reserved.                
-+*--------------------------------------------------------------------------
-+*	sl_nat_cfg.h
-+*
-+*	Description:
-+*		- Define the Device Control Commands for NAT Configuration
-+*	
-+*	History:
-+*
-+*	4/28/2006	Gary Chen	Create
-+*
-+*-----------------------------------------------------------------------------*/
-+#ifndef _SL351x_NAT_CFG_H_
-+#define _SL351x_NAT_CFG_H_	1
-+
-+/*----------------------------------------------------------------------
-+* Confiuration
-+*----------------------------------------------------------------------*/
-+#ifdef CONFIG_NETFILTER
-+#define CONFIG_SL351x_NAT			1
-+#undef CONFIG_SL351x_NAT
-+#undef CONFIG_SL351x_SYSCTL
-+#endif
-+#define CONFIG_NAT_MAX_IP_NUM		4	// per device (eth0 or eth1)
-+#define CONFIG_NAT_MAX_XPORT		64
-+#define CONFIG_NAT_MAX_WRULE		16	// per Queue
-+#define CONFIG_NAT_TXQ_NUM			4
-+/*----------------------------------------------------------------------
-+* Command set
-+*----------------------------------------------------------------------*/
-+#define SIOCDEVSL351x	SIOCDEVPRIVATE	// 0x89F0
-+#define NATSSTATUS		0
-+#define NATGSTATUS		1
-+#define NATSETPORT		2
-+#define NATGETPORT		3
-+#define NATADDIP		4
-+#define NATDELIP		5
-+#define NATGETIP		6
-+#define NATAXPORT		7
-+#define NATDXPORT		8
-+#define NATGXPORT		9
-+#define NATSWEIGHT		10
-+#define NATGWEIGHT		11
-+#define NATAWRULE		12
-+#define NATDWRULE		13
-+#define NATGWRULE		14
-+#define NATSDEFQ		15
-+#define NATGDEFQ		16
-+#define NATRMIPCFG		17		// remove IP config
-+#define NATTESTENTRY	18
-+#define NATSETMEM		19
-+#define NATSHOWMEM		20
-+/*----------------------------------------------------------------------
-+* Command Structure
-+*----------------------------------------------------------------------*/
-+// Common Header
-+typedef struct {
-+	unsigned short		cmd;	// command ID
-+	unsigned short		len;	// data length, excluding this header
-+} NATCMD_HDR_T;
-+
-+// NATSSTATUS & NATGSTATUS commands
-+typedef struct {
-+	unsigned char		enable;
-+} NAT_STATUS_T;	
-+
-+// NATSETPORT & NATGETPORT commands
-+typedef struct {
-+	unsigned char		portmap;
-+} NAT_PORTCFG_T;
-+
-+typedef struct {
-+	unsigned int		ipaddr;
-+	unsigned int		netmask;
-+} NAT_IP_ENTRY_T;
-+
-+// NATADDIP & NATDELIP commands
-+typedef struct {
-+	NAT_IP_ENTRY_T	entry;
-+} NAT_IPCFG_T;
-+
-+// NATGETIP command
-+typedef struct {
-+	unsigned int	total;
-+	NAT_IP_ENTRY_T	entry[CONFIG_NAT_MAX_IP_NUM];
-+} NAT_IPCFG_ALL_T;
-+
-+typedef struct {
-+	unsigned int		protocol;
-+	unsigned short		sport_start;
-+	unsigned short		sport_end;
-+	unsigned short		dport_start;
-+	unsigned short		dport_end;
-+} NAT_XPORT_ENTRY_T;
-+
-+// NATAXPORT & NATDXPORT Commands
-+typedef struct {
-+	NAT_XPORT_ENTRY_T	entry;
-+} NAT_XPORT_T;
-+
-+// NATGXPORT Command
-+typedef struct {
-+	unsigned int		total;
-+	NAT_XPORT_ENTRY_T	entry[CONFIG_NAT_MAX_XPORT];
-+} NAT_XPORT_ALL_T;
-+
-+// NATSWEIGHT & NATGWEIGHT Commands
-+typedef struct {
-+	unsigned char		weight[CONFIG_NAT_TXQ_NUM];
-+} NAT_WEIGHT_T;
-+
-+typedef struct {
-+	unsigned int		protocol;
-+	unsigned int		sip_start;
-+	unsigned int		sip_end;
-+	unsigned int		dip_start;
-+	unsigned int		dip_end;
-+	unsigned short		sport_start;
-+	unsigned short		sport_end;
-+	unsigned short		dport_start;
-+	unsigned short		dport_end;
-+} NAT_WRULE_ENTRY_T;	
-+
-+// NATAWRULE & NATDWRULE Commands
-+typedef struct {
-+	unsigned int		qid;
-+	NAT_WRULE_ENTRY_T	entry;
-+} NAT_WRULE_T;
-+
-+// NATGWRULE Command
-+typedef struct {
-+	unsigned int		total;
-+	NAT_WRULE_ENTRY_T	entry[CONFIG_NAT_MAX_WRULE];
-+} NAT_WRULE_ALL_T;
-+
-+// NATSDEFQ & NATGDEFQ commands
-+typedef struct {
-+	unsigned int		qid;
-+} NAT_QUEUE_T;	
-+
-+// NATTESTENTRY 
-+typedef struct {
-+	u_int16_t		cmd;	// command ID
-+	u_int16_t		len;	// data length, excluding this header
-+	u_int8_t		init_enable;
-+} NAT_TESTENTRY_T;	
-+	
-+typedef union
-+{
-+	NAT_STATUS_T		status;
-+	NAT_PORTCFG_T		portcfg;
-+	NAT_IPCFG_T			ipcfg;
-+	NAT_XPORT_T			xport;
-+	NAT_WEIGHT_T		weight;
-+	NAT_WRULE_T			wrule;
-+	NAT_QUEUE_T			queue;
-+	NAT_TESTENTRY_T init_entry;
-+} NAT_REQ_E;
-+	
-+/*----------------------------------------------------------------------
-+* NAT Configuration
-+*	- Used by driver only
-+*----------------------------------------------------------------------*/
-+typedef struct {
-+	unsigned int		enabled;
-+	unsigned int		init_enabled;
-+	unsigned int		tcp_udp_rule_id;
-+	unsigned int		gre_rule_id;
-+	unsigned int		lan_port;
-+	unsigned int		wan_port;
-+	unsigned int		default_hw_txq;
-+	short				tcp_tmo_interval;
-+	short				udp_tmo_interval;
-+	short				gre_tmo_interval;
-+	NAT_IPCFG_ALL_T		ipcfg[2];	// LAN/WAN port
-+	NAT_XPORT_ALL_T		xport;
-+	NAT_WEIGHT_T		weight;
-+	NAT_WRULE_ALL_T		wrule[CONFIG_NAT_TXQ_NUM];
-+} NAT_CFG_T;
-+
-+/*----------------------------------------------------------------------
-+* NAT Control Block
-+*	- Used by driver only
-+*	- Stores LAN-IN or WAN-IN information
-+*	- WAN-OUT and LAN-OUT driver use them to build up a hash entry
-+*	- NOTES: To update this data structure, MUST take care of alignment issue
-+*   -		 MUST make sure that the size of skbuff structure must 
-+*            be larger than (40 + sizof(NAT_CB_T))
-+*----------------------------------------------------------------------*/
-+typedef struct {
-+	unsigned short		tag;
-+	unsigned char		sa[6];
-+	unsigned int		sip;
-+	unsigned int		dip;
-+	unsigned short		sport;
-+	unsigned short		dport;
-+	unsigned char		pppoe_frame;
-+	unsigned char		state;			// same to enum tcp_conntrack
-+	unsigned char		reserved[2];
-+} NAT_CB_T;
-+
-+#define NAT_CB_TAG		0x4C53	// "SL"
-+#define NAT_CB_SIZE		sizeof(NAT_CB_T)
-+// #define NAT_SKB_CB(skb)	(NAT_CB_T *)(((unsigned int)&((skb)->cb[40]) + 3) & ~3)  // for align 4
-+#define NAT_SKB_CB(skb)	(NAT_CB_T *)&((skb)->cb[40])  // for align 4
-+
-+#endif // _SL351x_NAT_CFG_H_
-+
-+
-+
---- /dev/null
-+++ b/include/asm-arm/arch-sl2312/sl351x_toe.h
-@@ -0,0 +1,88 @@
-+/**************************************************************************
-+* Copyright 2006 StorLink Semiconductors, Inc.  All rights reserved.
-+*--------------------------------------------------------------------------
-+* Name			: sl351x_toe.h
-+* Description	:
-+*		Define for TOE driver of Storlink SL351x
-+*
-+* History
-+*
-+*	Date		Writer		Description
-+*----------------------------------------------------------------------------
-+*				Xiaochong	Create
-+*
-+****************************************************************************/
-+#ifndef __SL351x_TOE_H
-+#define __SL351x_TOE_H	1
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+/*
-+ * TOE_CONN_T is data structure of tcp connection info, used at both
-+ * device layer and kernel tcp layer
-+ * skb is the jumbo frame
-+ */
-+
-+struct toe_conn{
-+	__u8	qid;		// connection qid 0~63.
-+	__u8	ip_ver;		// 0: not used; 4: ipv4; 6: ipv6.
-+	/* hash key of the connection */
-+	__u16	source;
-+	__u16	dest;
-+	__u32	saddr[4];
-+	__u32	daddr[4];
-+
-+	__u32	seq;
-+	__u32	ack_seq;
-+
-+	/* these fields are used to set TOE QHDR */
-+	__u32	ack_threshold;
-+	__u32	seq_threshold;
-+	__u16	max_pktsize;
-+
-+	/* used by sw toe, accumulated ack_seq of ack frames */
-+	__u16	ack_cnt;
-+	/* used by sw toe, accumulated data frames held at driver */
-+	__u16	cur_pktsize;
-+
-+	__u8	status;
-+#define	TCP_CONN_UNDEFINE		0X00
-+#define	TCP_CONN_CREATION		0X01
-+#define	TCP_CONN_CONNECTING		0X02
-+#define	TCP_CONN_ESTABLISHED	0X04
-+#define	TCP_CONN_RESET			0X08	// this is used for out-of-order
-+                      			    	// or congestion window is small
-+#define	TCP_CONN_CLOSING		0X10
-+#define	TCP_CONN_CLOSED			0x11
-+
-+	__u16	hash_entry_index;	/* associated hash entry */
-+
-+	// one timer per connection. Otherwise all connections should be scanned
-+	// in a timeout interrupt, and timeout interrupt is triggered no matter
-+	// a connection is actually timeout or not.
-+	struct timer_list	rx_timer;
-+	unsigned long		last_rx_jiffies;
-+	GMAC_INFO_T			*gmac;
-+	struct net_device	*dev;
-+
-+	//	for generating pure ack frame.
-+	struct ethhdr		l2_hdr;
-+	struct iphdr		l3_hdr;
-+
-+	spinlock_t			conn_lock;
-+	DMA_RWPTR_T			toeq_rwptr;
-+	GMAC_RXDESC_T		*curr_desc;
-+	struct sk_buff		*curr_rx_skb;
-+};
-+
-+struct jumbo_frame {
-+	struct sk_buff	*skb0;		// the head of jumbo frame
-+	struct sk_buff	*tail;		// the tail of jumbo frame
-+	struct iphdr	*iphdr0;	// the ip hdr of skb0.
-+	struct tcphdr	*tcphdr0;	// the tcp hdr of skb0.
-+};
-+
-+#endif // __SL351x_TOE_H
---- a/drivers/net/Kconfig
-+++ b/drivers/net/Kconfig
-@@ -2131,6 +2131,42 @@
- 
- 	  The safe and default value for this is N.
- 
-+config NET_GMAC
-+	tristate "Storlink Gigabit Ethernet support"
-+	depends on ARCH_SL2312
-+	help
-+	  This driver supports Storlink dual Gigabit Ethernet.
-+
-+config NET_SL2312
-+	tristate "Storlink Gigabit Ethernet support"
-+	depends on NET_GMAC
-+	help
-+	  This driver supports Storlink dual Gigabit Ethernet.
-+
-+config NET_SL351X
-+	tristate "Storlink Lepus Gigabit Ethernet support"
-+	depends on NET_GMAC
-+	help
-+	  This driver supports Storlink TOE and NAT dual Gigabit Ethernet.
-+
-+config SL2312_TSO
-+	bool "Tx Segmentation Enable"
-+	depends on NET_GMAC
-+	help
-+	  TBD
-+
-+config SL2312_MPAGE
-+	bool "Tx Multipage Enable"
-+	depends on NET_GMAC
-+	help
-+	  TBD
-+
-+config SL2312_RECVFILE
-+	bool "Rx Multipage Enable"
-+	depends on NET_GMAC
-+	help
-+	  TBD
-+
- config DL2K
- 	tristate "D-Link DL2000-based Gigabit Ethernet support"
- 	depends on PCI
---- a/drivers/net/Makefile
-+++ b/drivers/net/Makefile
-@@ -236,4 +236,8 @@
- 
- obj-$(CONFIG_FS_ENET) += fs_enet/
- 
--obj-$(CONFIG_NETXEN_NIC) += netxen/
-+
-+obj-$(CONFIG_NET_SL351X)+= sl351x_gmac.o sl351x_nat.o sl351x_hash.o sl351x_crc16.o sl351x_proc.o sl_switch.o
-+obj-$(CONFIG_NET_SL2312)+= sl2312_emac.o
-+
-+
diff --git a/target/linux/storm/patches/1003-gmac_one_phy.patch b/target/linux/storm/patches/1003-gmac_one_phy.patch
deleted file mode 100644
index 15a69c905e..0000000000
--- a/target/linux/storm/patches/1003-gmac_one_phy.patch
+++ /dev/null
@@ -1,11 +0,0 @@
---- a/include/asm-arm/arch-sl2312/sl351x_gmac.h
-+++ b/include/asm-arm/arch-sl2312/sl351x_gmac.h
-@@ -21,7 +21,7 @@
- #undef BIG_ENDIAN
- #define BIG_ENDIAN  				0
- #define GMAC_DEBUG      			1
--#define GMAC_NUM					2
-+#define GMAC_NUM					1
- //#define	L2_jumbo_frame				1
- 
- #define _PACKED_					__attribute__ ((aligned(1), packed))
diff --git a/target/linux/storm/patches/1004-gmac-enable-napi.patch b/target/linux/storm/patches/1004-gmac-enable-napi.patch
deleted file mode 100644
index ea374c41c9..0000000000
--- a/target/linux/storm/patches/1004-gmac-enable-napi.patch
+++ /dev/null
@@ -1,81 +0,0 @@
---- a/drivers/net/sl351x_gmac.c
-+++ b/drivers/net/sl351x_gmac.c
-@@ -68,9 +68,11 @@
- #include 
- #endif
- 
-+/* Enables NAPI unconditionally */
-+#define CONFIG_SL_NAPI					1
-+
- // #define SL351x_TEST_WORKAROUND
- #ifdef CONFIG_SL351x_NAT
--#define CONFIG_SL_NAPI					1
- #endif
- #define GMAX_TX_INTR_DISABLED			1
- #define DO_HW_CHKSUM					1
-@@ -124,12 +126,17 @@
-  *************************************************************/
- static int	gmac_initialized = 0;
- TOE_INFO_T toe_private_data;
--//static int		do_again = 0;
-+static int		do_again = 0;
- spinlock_t gmac_fq_lock;
- unsigned int FLAG_SWITCH;
- 
- static unsigned int     	next_tick = 3 * HZ;
--static unsigned char    	eth_mac[CONFIG_MAC_NUM][6]= {{0x00,0x11,0x11,0x87,0x87,0x87}, {0x00,0x22,0x22,0xab,0xab,0xab}};
-+static unsigned char    	eth_mac[CONFIG_MAC_NUM][6]= {
-+		{0x00,0x11,0x11,0x87,0x87,0x87},
-+#if GMAC_NUM != 1
-+		{0x00,0x22,0x22,0xab,0xab,0xab}
-+#endif
-+};
- 
- #undef CONFIG_SL351x_RXTOE
- extern NAT_CFG_T nat_cfg;
-@@ -2443,7 +2450,8 @@
- 	toe = (TOE_INFO_T *)&toe_private_data;
- //	handle NAPI
- #ifdef CONFIG_SL_NAPI
--if (storlink_ctl.pauseoff == 1)
-+	/* XXX: check this, changed from 'storlink_ctl.pauseoff == 1' to if (1) */
-+if (1)
- {
- /* disable GMAC interrupt */
-     //toe_gmac_disable_interrupt(tp->irq);
-@@ -2530,7 +2538,7 @@
- 				{
- 					if (likely(netif_rx_schedule_prep(dev)))
-         			{
--        				unsigned int data32;
-+        				// unsigned int data32;
-         				// disable GMAC-0 rx interrupt
-         				// class-Q & TOE-Q are implemented in future
-         				//data32 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_1_REG);
-@@ -2563,7 +2571,7 @@
- 			{
- 				if (likely(netif_rx_schedule_prep(dev)))
-         		{
--        			unsigned int data32;
-+        			// unsigned int data32;
-          			// disable GMAC-0 rx interrupt
-         			// class-Q & TOE-Q are implemented in future
-         			//data32 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_1_REG);
-@@ -4217,7 +4225,7 @@
- 	GMAC_INFO_T			*tp = (GMAC_INFO_T *)dev->priv;
- 	unsigned int		status4;
- 	volatile DMA_RWPTR_T	fq_rwptr;
--	int					max_cnt = TOE_SW_FREEQ_DESC_NUM;//TOE_SW_FREEQ_DESC_NUM = 64
-+	// int					max_cnt = TOE_SW_FREEQ_DESC_NUM;//TOE_SW_FREEQ_DESC_NUM = 64
- 	//unsigned long		rx_old_bytes;
- 	struct net_device_stats *isPtr = (struct net_device_stats *)&tp->ifStatics;
- 	//unsigned long long	rx_time;
-@@ -4479,7 +4487,7 @@
- 
- 	if (rwptr.bits.rptr == rwptr.bits.wptr)
- 	{
--		unsigned int data32;
-+		// unsigned int data32;
- 			//printk("%s:---[rwptr.bits.rptr == rwptr.bits.wptr]   rx_pkts_num=%d------rwptr.bits.rptr=0x%x------->Default_Q [rwptr.bits.rptr(SW)=0x%x,   rwptr.bits.wptr(HW) = 0x%x ]---->Free_Q(SW_HW) = 0x%8x \n",__func__,rx_pkts_num,rwptr.bits.rptr,rwptr.bits.rptr,rwptr.bits.wptr,fq_rwptr.bits32 );
- 
- 	    /* Receive descriptor is empty now */
diff --git a/target/linux/storm/patches/1005-gmac-napi-mask-intrs.patch b/target/linux/storm/patches/1005-gmac-napi-mask-intrs.patch
deleted file mode 100644
index f0b6375432..0000000000
--- a/target/linux/storm/patches/1005-gmac-napi-mask-intrs.patch
+++ /dev/null
@@ -1,248 +0,0 @@
---- a/drivers/net/sl351x_gmac.c
-+++ b/drivers/net/sl351x_gmac.c
-@@ -127,6 +127,7 @@
- static int	gmac_initialized = 0;
- TOE_INFO_T toe_private_data;
- static int		do_again = 0;
-+static int rx_poll_enabled;
- spinlock_t gmac_fq_lock;
- unsigned int FLAG_SWITCH;
- 
-@@ -1065,7 +1066,8 @@
- 	    tp->intr3_enabled = 	0xffffffff;
- 	    tp->intr4_selected = 	GMAC0_INT_BITS | CLASS_RX_FULL_INT_BITS |
- 	    						HWFQ_EMPTY_INT_BIT | SWFQ_EMPTY_INT_BIT;
--	    tp->intr4_enabled = 	GMAC0_INT_BITS | SWFQ_EMPTY_INT_BIT;
-+	    tp->intr4_enabled = 	GMAC0_INT_BITS | SWFQ_EMPTY_INT_BIT| GMAC0_RX_OVERRUN_INT_BIT;
-+	    // GMAC0_TX_PAUSE_OFF_INT_BIT| GMAC0_MIB_INT_BIT;
- 
- 	    data = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_0_REG) & ~tp->intr0_selected;
- 	    writel(data, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_0_REG);
-@@ -1115,7 +1117,7 @@
- 	    	tp->intr3_enabled	|= 	0xffffffff;
- 	    	tp->intr4_selected 	|= 	CLASS_RX_FULL_INT_BITS |
- 	    							HWFQ_EMPTY_INT_BIT | SWFQ_EMPTY_INT_BIT;
--	    	tp->intr4_enabled	|= 	SWFQ_EMPTY_INT_BIT;
-+	    	tp->intr4_enabled	|= 	SWFQ_EMPTY_INT_BIT | GMAC1_RX_OVERRUN_INT_BIT;
- 		}
- 	    data = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_0_REG) | tp->intr0_selected;
- 	    writel(data, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_0_REG);
-@@ -2408,7 +2410,7 @@
- 	// unsigned short max_cnt=TOE_SW_FREEQ_DESC_NUM>>1;
- 
- 	fq_rwptr.bits32 = readl(TOE_GLOBAL_BASE + GLOBAL_SWFQ_RWPTR_REG);
--	spin_lock_irqsave(&gmac_fq_lock, flags);
-+	// spin_lock_irqsave(&gmac_fq_lock, flags);
- 	//while ((max_cnt--) && (unsigned short)RWPTR_ADVANCE_ONE(fq_rwptr.bits.wptr,
- 	//				TOE_SW_FREEQ_DESC_NUM) != fq_rwptr.bits.rptr) {
- 	while ((unsigned short)RWPTR_ADVANCE_ONE(fq_rwptr.bits.wptr,
-@@ -2428,10 +2430,47 @@
- 		SET_WPTR(TOE_GLOBAL_BASE+GLOBAL_SWFQ_RWPTR_REG, fq_rwptr.bits.wptr);
- 		toe_private_data.fq_rx_rwptr.bits32 = fq_rwptr.bits32;
- 	}
--	spin_unlock_irqrestore(&gmac_fq_lock, flags);
-+	// spin_unlock_irqrestore(&gmac_fq_lock, flags);
- }
- // EXPORT_SYMBOL(toe_gmac_fill_free_q);
- 
-+static void gmac_registers(const char *message)
-+{
-+	unsigned int		status0;
-+	unsigned int		status1;
-+	unsigned int		status2;
-+	unsigned int		status3;
-+	unsigned int		status4;
-+
-+	printk("%s\n", message);
-+
-+	status0 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_STATUS_0_REG);
-+	status1 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_STATUS_1_REG);
-+	status2 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_STATUS_2_REG);
-+	status3 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_STATUS_3_REG);
-+	status4 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_STATUS_4_REG);
-+
-+	printk("status: s0:%08X, s1:%08X, s2:%08X, s3:%08X, s4:%08X\n",
-+		   status0, status1, status2, status3, status4);
-+
-+	status0 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_0_REG);
-+	status1 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_1_REG);
-+	status2 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_2_REG);
-+	status3 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_3_REG);
-+	status4 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_4_REG);
-+
-+	printk("mask  : s0:%08X, s1:%08X, s2:%08X, s3:%08X, s4:%08X\n",
-+		   status0, status1, status2, status3, status4);
-+
-+	status0 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_0_REG);
-+	status1 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_1_REG);
-+	status2 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_2_REG);
-+	status3 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_3_REG);
-+	status4 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_4_REG);
-+
-+	printk("select: s0:%08X, s1:%08X, s2:%08X, s3:%08X, s4:%08X\n",
-+		   status0, status1, status2, status3, status4);
-+}
- /*----------------------------------------------------------------------
- * toe_gmac_interrupt
- *----------------------------------------------------------------------*/
-@@ -2492,6 +2531,7 @@
- 		writel(status3 & tp->intr3_enabled, TOE_GLOBAL_BASE+GLOBAL_INTERRUPT_STATUS_3_REG);
- 	if (status4)
- 		writel(status4 & tp->intr4_enabled, TOE_GLOBAL_BASE+GLOBAL_INTERRUPT_STATUS_4_REG);
-+
- #if 0
- 	/* handle freeq interrupt first */
- 	if (status4 & tp->intr4_enabled) {
-@@ -2536,10 +2576,31 @@
- 			}
- 				if (netif_running(dev) && (status1 & DEFAULT_Q0_INT_BIT) && (tp->intr1_enabled & DEFAULT_Q0_INT_BIT))
- 				{
--					if (likely(netif_rx_schedule_prep(dev)))
-+					if (!rx_poll_enabled && likely(netif_rx_schedule_prep(dev)))
-         			{
--        				// unsigned int data32;
--        				// disable GMAC-0 rx interrupt
-+        				unsigned int data32;
-+
-+						if (rx_poll_enabled)
-+								gmac_registers("check #1");
-+
-+						BUG_ON(rx_poll_enabled == 1);
-+
-+#if 0
-+        				/* Masks GMAC-0 rx interrupt */
-+						data32  = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_1_REG);
-+						data32 &= ~(DEFAULT_Q0_INT_BIT);
-+						writel(data32, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_1_REG);
-+
-+        				/* Masks GMAC-0 queue empty interrupt */
-+						data32  = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_4_REG);
-+						data32 &= ~DEFAULT_Q0_INT_BIT;
-+						writel(data32, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_4_REG);
-+
-+						data32  = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_4_REG);
-+						data32 &= ~DEFAULT_Q0_INT_BIT;
-+						writel(data32, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_4_REG);
-+#endif
-+
-         				// class-Q & TOE-Q are implemented in future
-         				//data32 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_1_REG);
-         				//data32 &= ~DEFAULT_Q0_INT_BIT;
-@@ -2549,7 +2610,8 @@
- 						//tp->total_q_cnt_napi=0;
- 						//rx_time = jiffies;
- 						//rx_old_bytes = isPtr->rx_bytes;
--            			__netif_rx_schedule(dev);
-+						__netif_rx_schedule(dev);
-+						rx_poll_enabled = 1;
-         			}
- 			}
- 		}
-@@ -2569,9 +2631,31 @@
- 
- 			if (netif_running(dev) && (status1 & DEFAULT_Q1_INT_BIT) && (tp->intr1_enabled & DEFAULT_Q1_INT_BIT))
- 			{
--				if (likely(netif_rx_schedule_prep(dev)))
-+				if (!rx_poll_enabled && likely(netif_rx_schedule_prep(dev)))
-         		{
--        			// unsigned int data32;
-+        			unsigned int data32;
-+
-+					if (rx_poll_enabled)
-+							gmac_registers("check #2");
-+
-+					BUG_ON(rx_poll_enabled == 1);
-+
-+#if 0
-+					/* Masks GMAC-1 rx interrupt */
-+					data32  = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_1_REG);
-+					data32 &= ~(DEFAULT_Q1_INT_BIT);
-+					writel(data32, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_1_REG);
-+
-+        			/* Masks GMAC-1 queue empty interrupt */
-+					data32  = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_4_REG);
-+					data32 &= ~DEFAULT_Q1_INT_BIT;
-+					writel(data32, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_4_REG);
-+
-+					data32  = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_4_REG);
-+					data32 &= ~DEFAULT_Q1_INT_BIT;
-+					writel(data32, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_4_REG);
-+#endif
-+
-          			// disable GMAC-0 rx interrupt
-         			// class-Q & TOE-Q are implemented in future
-         			//data32 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_1_REG);
-@@ -2583,9 +2667,13 @@
- 					//rx_time = jiffies;
- 					//rx_old_bytes = isPtr->rx_bytes;
-            			__netif_rx_schedule(dev);
-+				rx_poll_enabled = 1;
-         		}
- 			}
- 		}
-+	} else {
-+
-+		gmac_registers("check #3");
- 	}
- 
- 	// Interrupt Status 0
-@@ -3306,8 +3394,10 @@
- 		SET_RPTR(&tp->default_qhdr->word1, rwptr.bits.rptr);
-      	tp->rx_rwptr.bits32 = rwptr.bits32;
- 
--		toe_gmac_fill_free_q();
- 	}
-+
-+	/* Handles first available packets only then refill the queue. */
-+	toe_gmac_fill_free_q();
- }
- 
- /*----------------------------------------------------------------------
-@@ -4217,6 +4307,7 @@
-     GMAC_RXDESC_T   	*curr_desc;
- 	struct sk_buff 		*skb;
-     DMA_RWPTR_T			rwptr;
-+    unsigned int data32;
- 	unsigned int 		pkt_size;
- 	unsigned int        desc_count;
- 	unsigned int        good_frame, chksum_status, rx_status;
-@@ -4231,7 +4322,7 @@
- 	//unsigned long long	rx_time;
- 
- 
--
-+	BUG_ON(rx_poll_enabled == 0);
- #if 1
- 	if (do_again)
- 	{
-@@ -4516,6 +4607,30 @@
- #endif
-         //toe_gmac_fill_free_q();
-         netif_rx_complete(dev);
-+
-+		rx_poll_enabled = 0;
-+
-+		data32 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_1_REG);
-+		if (tp->port_id == 0)
-+				data32 |= DEFAULT_Q0_INT_BIT;
-+		else
-+				data32 |= DEFAULT_Q1_INT_BIT;
-+		writel(data32, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_1_REG);
-+
-+		data32 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_4_REG);
-+		if (tp->port_id == 0)
-+				data32 |= DEFAULT_Q0_INT_BIT;
-+		else
-+				data32 |= DEFAULT_Q1_INT_BIT;
-+		writel(data32, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_4_REG);
-+
-+		data32 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_4_REG);
-+		if (tp->port_id == 0)
-+				data32 |= DEFAULT_Q0_INT_BIT;
-+		else
-+				data32 |= DEFAULT_Q1_INT_BIT;
-+		writel(data32, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_4_REG);
-+
-         // enable GMAC-0 rx interrupt
-         // class-Q & TOE-Q are implemented in future
-         //data32 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_1_REG);
diff --git a/target/linux/storm/patches/1006-gmac-napi-tx.patch b/target/linux/storm/patches/1006-gmac-napi-tx.patch
deleted file mode 100644
index 5861a6553d..0000000000
--- a/target/linux/storm/patches/1006-gmac-napi-tx.patch
+++ /dev/null
@@ -1,2094 +0,0 @@
---- a/drivers/net/sl351x_gmac.c
-+++ b/drivers/net/sl351x_gmac.c
-@@ -43,9 +43,13 @@
- 
- #include 
- 
-+#define GET_RPTR(x) ((x) & 0xFFFF)
-+#define GET_WPTR(x) ((x) >> 16)
-+
- #define	 MIDWAY
- #define	 SL_LEPUS
--#define VITESSE_G5SWITCH	1
-+// #define VITESSE_G5SWITCH	1
-+#undef VITESSE_G5SWITCH
- 
- #ifndef CONFIG_SL351x_RXTOE
- //#define CONFIG_SL351x_RXTOE	1
-@@ -126,7 +130,6 @@
-  *************************************************************/
- static int	gmac_initialized = 0;
- TOE_INFO_T toe_private_data;
--static int		do_again = 0;
- static int rx_poll_enabled;
- spinlock_t gmac_fq_lock;
- unsigned int FLAG_SWITCH;
-@@ -190,7 +193,7 @@
- void mac_set_sw_tx_weight(struct net_device *dev, char *weight);
- void mac_get_hw_tx_weight(struct net_device *dev, char *weight);
- void mac_set_hw_tx_weight(struct net_device *dev, char *weight);
--static inline void toe_gmac_fill_free_q(void);
-+static inline void toe_gmac_fill_free_q(int count);
- 
- #ifdef VITESSE_G5SWITCH
- extern int Get_Set_port_status(void);
-@@ -295,12 +298,14 @@
- 	for(j = 0; idev = NULL;
-@@ -459,7 +464,7 @@
- 		toe->gmac[1].dma_base_addr = TOE_GMAC1_DMA_BASE;
-         toe->gmac[0].auto_nego_cfg = 1;
-         toe->gmac[1].auto_nego_cfg = 1;
--#ifdef CONFIG_SL3516_ASIC
-+#ifndef CONFIG_SL3516_ASIC
-         toe->gmac[0].speed_cfg = GMAC_SPEED_1000;
-         toe->gmac[1].speed_cfg = GMAC_SPEED_1000;
- #else
-@@ -508,7 +513,7 @@
- 		// Write GLOBAL_QUEUE_THRESHOLD_REG
- 		threshold.bits32 = 0;
- 		threshold.bits.swfq_empty = (TOE_SW_FREEQ_DESC_NUM > 256) ? 255 :
--		                                        TOE_SW_FREEQ_DESC_NUM/2;
-+		                                        TOE_SW_FREEQ_DESC_NUM/16;
- 		threshold.bits.hwfq_empty = (TOE_HW_FREEQ_DESC_NUM > 256) ? 256/4 :
- 		                                        TOE_HW_FREEQ_DESC_NUM/4;
- 		threshold.bits.toe_class = (TOE_TOE_DESC_NUM > 256) ? 256/4 :
-@@ -613,18 +618,25 @@
- 	rwptr_reg.bits.rptr = 0;
- 	toe->fq_rx_rwptr.bits32 = rwptr_reg.bits32;
- 	writel(rwptr_reg.bits32, TOE_GLOBAL_BASE + GLOBAL_SWFQ_RWPTR_REG);
-+	printk("SWFQ: %08X\n", readl(TOE_GLOBAL_BASE + GLOBAL_SWFQ_RWPTR_REG));
- 
- 	// SW Free Queue Descriptors
- 	for (i=0; iword0.bits.buffer_size = SW_RX_BUF_SIZE;
--		sw_desc_ptr->word1.bits.sw_id = i;	// used to locate skb
-+		sw_desc_ptr->word1.bits.sw_id = 0;	// used to locate skb
- 		if ( (skb = dev_alloc_skb(SW_RX_BUF_SIZE))==NULL)  /* allocate socket buffer */
- 		{
- 			printk("%s::skb buffer allocation fail !\n",__func__); while(1);
- 		}
--		REG32(skb->data) = (unsigned int)skb;
-+
-+		data = skb->data;
- 		skb_reserve(skb, SKB_RESERVE_BYTES);
-+
-+		REG32(data + 0) = (unsigned int)skb;
-+		REG32(data + 4) = (unsigned short)i;
-+
- 		// toe->rx_skb[i] = skb;
- 		sw_desc_ptr->word2.buf_adr = (unsigned int)__pa(skb->data);
- //   		consistent_sync((unsigned int)desc_ptr, sizeof(GMAC_RXDESC_T), PCI_DMA_TODEVICE);
-@@ -851,14 +863,14 @@
- *----------------------------------------------------------------------*/
- static void toe_init_default_queue(void)
- {
--	TOE_INFO_T				*toe;
-+	TOE_INFO_T		*toe;
- 	volatile NONTOE_QHDR_T	*qhdr;
--	GMAC_RXDESC_T			*desc_ptr;
--	DMA_SKB_SIZE_T			skb_size;
-+	GMAC_RXDESC_T		*desc_ptr;
-+	DMA_SKB_SIZE_T		skb_size;
- 
- 	toe = (TOE_INFO_T *)&toe_private_data;
- 	desc_ptr = (GMAC_RXDESC_T *)DMA_MALLOC((TOE_DEFAULT_Q0_DESC_NUM * sizeof(GMAC_RXDESC_T)),
--											(dma_addr_t *)&toe->gmac[0].default_desc_base_dma);
-+					       (dma_addr_t *)&toe->gmac[0].default_desc_base_dma);
- 	if (!desc_ptr)
- 	{
- 		printk("%s::DMA_MALLOC fail !\n",__func__);
-@@ -866,14 +878,17 @@
- 	}
- 	memset((void *)desc_ptr, 0, TOE_DEFAULT_Q0_DESC_NUM * sizeof(GMAC_RXDESC_T));
- 	toe->gmac[0].default_desc_base = (unsigned int)desc_ptr;
-+	printk("toe->gmac[0].default_desc_base_dma: %08X\n", toe->gmac[0].default_desc_base_dma);
-+
- 	toe->gmac[0].default_desc_num = TOE_DEFAULT_Q0_DESC_NUM;
- 	qhdr = (volatile NONTOE_QHDR_T *)TOE_DEFAULT_Q0_HDR_BASE;
- 	qhdr->word0.base_size = ((unsigned int)toe->gmac[0].default_desc_base_dma & NONTOE_QHDR0_BASE_MASK) | TOE_DEFAULT_Q0_DESC_POWER;
- 	qhdr->word1.bits32 = 0;
- 	toe->gmac[0].rx_rwptr.bits32 = 0;
- 	toe->gmac[0].default_qhdr = (NONTOE_QHDR_T *)qhdr;
-+
- 	desc_ptr = (GMAC_RXDESC_T *)DMA_MALLOC((TOE_DEFAULT_Q1_DESC_NUM * sizeof(GMAC_RXDESC_T)),
--											(dma_addr_t *)&toe->gmac[1].default_desc_base_dma);
-+					       (dma_addr_t *)&toe->gmac[1].default_desc_base_dma);
- 	if (!desc_ptr)
- 	{
- 		printk("%s::DMA_MALLOC fail !\n",__func__);
-@@ -1071,12 +1086,16 @@
- 
- 	    data = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_0_REG) & ~tp->intr0_selected;
- 	    writel(data, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_0_REG);
-+
- 	    data = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_1_REG) & ~tp->intr1_selected;
- 	    writel(data, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_1_REG);
-+
- 	    data = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_2_REG) & ~tp->intr2_selected;
- 	    writel(data, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_2_REG);
-+
- 	    data = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_3_REG) & ~tp->intr3_selected;
- 	    writel(data, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_3_REG);
-+
- 	    data = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_4_REG) & ~tp->intr4_selected;
- 	    writel(data, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_4_REG);
- 	}
-@@ -1176,11 +1195,11 @@
- 	GMAC_CONFIG2_T	config2_val;
- 	GMAC_CONFIG0_T	config0,config0_mask;
- 	GMAC_CONFIG1_T	config1;
--	#ifdef CONFIG_SL351x_NAT
- 	GMAC_CONFIG3_T	config3_val;
--	#endif
- 	GMAC_TX_WCR0_T	hw_weigh;
- 	GMAC_TX_WCR1_T	sw_weigh;
-+
-+	uint32_t weight = 0;
- //	GMAC_HASH_ENABLE_REG0_T hash_ctrl;
- //
- #if 0 /* mac address will be set in late_initcall */
-@@ -1202,24 +1221,23 @@
- 	//	config1.bits32 = 0x002004;	//next version
- 	/* set flow control threshold */
- 	config1.bits32 = 0;
--	config1.bits.set_threshold = 32 / 2;
--	config1.bits.rel_threshold = 32 / 4 * 3;
-+	config1.bits.set_threshold = (32 / 2);
-+	config1.bits.rel_threshold = (32 / 4) * 3;
- 	gmac_write_reg(tp->base_addr, GMAC_CONFIG1, config1.bits32, 0xffffffff);
- 
--	/* set flow control threshold */
-+	/* TODO: set flow control threshold */
- 	config2_val.bits32 = 0;
--	config2_val.bits.set_threshold = TOE_SW_FREEQ_DESC_NUM/2;
--	config2_val.bits.rel_threshold = TOE_SW_FREEQ_DESC_NUM*3/4;
-+	config2_val.bits.set_threshold = TOE_SW_FREEQ_DESC_NUM/4;
-+	config2_val.bits.rel_threshold = TOE_SW_FREEQ_DESC_NUM/2;
- 	gmac_write_reg(tp->base_addr, GMAC_CONFIG2, config2_val.bits32,0xffffffff);
- 
--	#ifdef CONFIG_SL351x_NAT
--	/* set HW free queue flow control threshold */
-+	/* TODO: set HW free queue flow control threshold */
- 	config3_val.bits32 = 0;
- 	config3_val.bits.set_threshold = PAUSE_SET_HW_FREEQ;
- 	config3_val.bits.rel_threshold = PAUSE_REL_HW_FREEQ;
- 	gmac_write_reg(tp->base_addr, GMAC_CONFIG3, config3_val.bits32,0xffffffff);
--	#endif
--	/* set_mcast_filter mask*/
-+
-+	/* TODO: set_mcast_filter mask*/
- 	//	gmac_write_reg(tp->base_addr,GMAC_MCAST_FIL0,0x0,0xffffffff);
- 	//  gmac_write_reg(tp->base_addr,GMAC_MCAST_FIL1,0x0,0xffffffff);
- 
-@@ -1249,7 +1267,7 @@
- 	config0.bits.dis_rx = 1;  /* disable rx */
- 	config0.bits.dis_tx = 1;  /* disable tx */
- 	config0.bits.loop_back = 0; /* enable/disable GMAC loopback */
--	config0.bits.rx_err_detect = 1;
-+	config0.bits.rx_err_detect = 1;	/* TODO: was 1, means disabled, 0 enabled ! */
- 	config0.bits.rgmii_en = 0;
- 	config0.bits.rgmm_edge = 1;
- 	config0.bits.rxc_inv = 0;
-@@ -1342,6 +1360,9 @@
- 	gmac_write_reg(tp->dma_base_addr, GMAC_AHB_WEIGHT_REG, ahb_weight.bits32, ahb_weight_mask.bits32);
- 	#endif
- 
-+	weight = gmac_read_reg(tp->dma_base_addr, GMAC_AHB_WEIGHT_REG);
-+	printk("====> %08X\n", weight);
-+
- 	#if defined(CONFIG_SL351x_NAT) || defined(CONFIG_SL351x_RXTOE)
- 	gmac_write_reg(tp->dma_base_addr, GMAC_SPR0, IPPROTO_TCP, 0xffffffff);
- 	#endif
-@@ -1552,7 +1573,7 @@
- 		rwptr.bits32 = readl(swtxq->rwptr_reg);
- 		if (rwptr.bits.rptr == swtxq->finished_idx)
- 			break;
--    	curr_desc = (volatile GMAC_TXDESC_T *)swtxq->desc_base + swtxq->finished_idx;
-+		curr_desc = (volatile GMAC_TXDESC_T *)swtxq->desc_base + swtxq->finished_idx;
- //   		consistent_sync((void *)curr_desc, sizeof(GMAC_TXDESC_T), PCI_DMA_FROMDEVICE);
- 		word0.bits32 = curr_desc->word0.bits32;
- 		word1.bits32 = curr_desc->word1.bits32;
-@@ -1573,6 +1594,7 @@
- 				swtxq->finished_idx = RWPTR_ADVANCE_ONE(swtxq->finished_idx, swtxq->total_desc_num);
- 				curr_desc = (GMAC_TXDESC_T *)swtxq->desc_base + swtxq->finished_idx;
- 				word0.bits32 = curr_desc->word0.bits32;
-+
- #ifdef _DUMP_TX_TCP_CONTENT
- 				if (curr_desc->word0.bits.buffer_size < 16)
- 				{
-@@ -1592,12 +1614,12 @@
- 			word0.bits.status_tx_ok = 0;
- 			if (swtxq->tx_skb[swtxq->finished_idx])
- 			{
--				if (interrupt)
--					dev_kfree_skb_irq(swtxq->tx_skb[swtxq->finished_idx]);
--				else
--					dev_kfree_skb(swtxq->tx_skb[swtxq->finished_idx]);
-+				dev_kfree_skb(swtxq->tx_skb[swtxq->finished_idx]);
- 				swtxq->tx_skb[swtxq->finished_idx] = NULL;
-+			} else {
-+				BUG();
- 			}
-+
- 			curr_desc->word0.bits32 = word0.bits32;
-   			swtxq->curr_finished_desc = (GMAC_TXDESC_T *)curr_desc;
-  			swtxq->total_finished++;
-@@ -1624,31 +1646,29 @@
- *----------------------------------------------------------------------*/
- static int gmac_start_xmit(struct sk_buff *skb, struct net_device *dev)
- {
--	GMAC_INFO_T 			*tp= dev->priv;
--//	static unsigned int     pcount = 0;
--//	unsigned int			tx_qid;
--    DMA_RWPTR_T				rwptr;
--	volatile GMAC_TXDESC_T	*curr_desc;
--	int 					snd_pages = skb_shinfo(skb)->nr_frags + 1;  /* get number of descriptor */
--	int 					frag_id = 0;
--	int 					len, total_len = skb->len;
-+	GMAC_INFO_T *tp= dev->priv;
-+	DMA_RWPTR_T rwptr;
-+	GMAC_TXDESC_T *curr_desc;
-+	int snd_pages = skb_shinfo(skb)->nr_frags + 1;  /* get number of descriptor */
-+	int frag_id = 0;
-+	int len, total_len = skb->len;
- 	struct net_device_stats *isPtr;
--	unsigned int			free_desc;
--	GMAC_SWTXQ_T			*swtxq;
-+	unsigned int free_desc;
-+	GMAC_SWTXQ_T *swtxq;
- 	register unsigned long	word0, word1, word2, word3;
- 	unsigned short			wptr, rptr;
- #ifdef	L2_jumbo_frame
- 	int header_len = skb->len;
- 	struct iphdr	*ip_hdr;
--    struct tcphdr	*tcp_hdr;
--    int             tcp_hdr_len;
--    unsigned char 	*ptr;
--    int             data_len,a;
--    unsigned int    val;
-+	struct tcphdr	*tcp_hdr;
-+	int             tcp_hdr_len;
-+	unsigned char 	*ptr;
-+	int             data_len,a;
-+	unsigned int    val;
- #endif
- 
- #ifdef GMAC_LEN_1_2_ISSUE
--	int						total_pages;
-+	int total_pages;
- 	total_pages = snd_pages;
- #endif
- 
-@@ -1664,13 +1684,6 @@
-     }
- #endif
- 
--#if 0
--	if (storlink_ctl.recvfile==2)
--	{
--	    printk("snd_pages=%d skb->len=%d\n",snd_pages,skb->len);
--	}
--#endif
--
- #ifdef GMAC_USE_TXQ0
- 	#define tx_qid 	0
- #endif
-@@ -1703,9 +1716,9 @@
- 	toe_gmac_tx_complete(tp, tx_qid, dev, 0);
- 
- 	if (wptr >= swtxq->finished_idx)
--		free_desc = swtxq->total_desc_num - wptr - 1 + swtxq->finished_idx;
-+		free_desc = swtxq->total_desc_num - wptr + swtxq->finished_idx;
- 	else
--		free_desc = swtxq->finished_idx - wptr - 1;
-+		free_desc = swtxq->finished_idx - wptr;
- 	if (free_desc < snd_pages)
- 	{
- //		spin_unlock(&tp->tx_mutex);
-@@ -2063,9 +2076,10 @@
- struct net_device_stats * gmac_get_stats(struct net_device *dev)
- {
-     GMAC_INFO_T *tp = (GMAC_INFO_T *)dev->priv;
-+#if 0	/* don't read stats from hardware, scary numbers. */
-     // unsigned int        flags;
--    unsigned int        pkt_drop;
--    unsigned int        pkt_error;
-+    unsigned int        pkt_drop = 0;
-+    unsigned int        pkt_error = 0;
- 
-     if (netif_running(dev))
-     {
-@@ -2073,10 +2087,14 @@
-         // spin_lock_irqsave(&tp->lock,flags);
-         pkt_drop = gmac_read_reg(tp->base_addr,GMAC_IN_DISCARDS);
-         pkt_error = gmac_read_reg(tp->base_addr,GMAC_IN_ERRORS);
-+	printk("**** stack: %lu, hw: %lu\n", tp->ifStatics.rx_dropped, pkt_drop);
-+
-         tp->ifStatics.rx_dropped = tp->ifStatics.rx_dropped + pkt_drop;
-         tp->ifStatics.rx_errors = tp->ifStatics.rx_errors + pkt_error;
-         // spin_unlock_irqrestore(&tp->lock,flags);
-     }
-+#endif
-+
-     return &tp->ifStatics;
- }
- 
-@@ -2401,36 +2419,63 @@
- * toe_gmac_fill_free_q
- * allocate buffers for free queue.
- *----------------------------------------------------------------------*/
--static inline void toe_gmac_fill_free_q(void)
-+static inline void toe_gmac_fill_free_q(int count)
- {
- 	struct sk_buff	*skb;
- 	volatile DMA_RWPTR_T	fq_rwptr;
- 	volatile GMAC_RXDESC_T	*fq_desc;
--	unsigned long	flags;
-+	unsigned long flags;
-+	unsigned short index;
-+	int filled = 0;
-+	static int entered;
- 	// unsigned short max_cnt=TOE_SW_FREEQ_DESC_NUM>>1;
- 
-+	BUG_ON(entered == 1);
-+
-+	entered = 1;
-+
-+
- 	fq_rwptr.bits32 = readl(TOE_GLOBAL_BASE + GLOBAL_SWFQ_RWPTR_REG);
- 	// spin_lock_irqsave(&gmac_fq_lock, flags);
- 	//while ((max_cnt--) && (unsigned short)RWPTR_ADVANCE_ONE(fq_rwptr.bits.wptr,
- 	//				TOE_SW_FREEQ_DESC_NUM) != fq_rwptr.bits.rptr) {
--	while ((unsigned short)RWPTR_ADVANCE_ONE(fq_rwptr.bits.wptr,
--					TOE_SW_FREEQ_DESC_NUM) != fq_rwptr.bits.rptr) {
-+	index = fq_rwptr.bits.wptr;
-+#if 0
-+	printk("wptr: %hu, rptr: %hu, refill idx: %hu\n",
-+	       GET_RPTR(fq_rwptr.bits32),
-+	       GET_WPTR(fq_rwptr.bits32),
-+	       index);
-+#endif
-+
-+	index = RWPTR_ADVANCE_ONE(index, TOE_SW_FREEQ_DESC_NUM);
-+	fq_desc = (GMAC_RXDESC_T*)toe_private_data.swfq_desc_base + index;
-+	while (fq_desc->word2.buf_adr == 0) {
-+		void *data = NULL;
-+
- 		if ((skb = dev_alloc_skb(SW_RX_BUF_SIZE)) == NULL) {
- 			printk("%s::skb allocation fail!\n", __func__);
--			//while(1);
--			break;
-+			goto out;
- 		}
--		REG32(skb->data) = (unsigned int)skb;
-+		++ filled;
-+		data = skb->data;
- 		skb_reserve(skb, SKB_RESERVE_BYTES);
--		// fq_rwptr.bits32 = readl(TOE_GLOBAL_BASE + GLOBAL_SWFQ_RWPTR_REG);
--		fq_rwptr.bits.wptr = RWPTR_ADVANCE_ONE(fq_rwptr.bits.wptr,
--			TOE_SW_FREEQ_DESC_NUM);
--		fq_desc = (GMAC_RXDESC_T*)toe_private_data.swfq_desc_base+fq_rwptr.bits.wptr;
-+
-+		REG32(data + 0) = (unsigned int)skb;
-+		REG32(data + 4) = (unsigned short)index;
-+
-+		// printk("refill skb: %p, idx: %hu\n", skb, index);
- 		fq_desc->word2.buf_adr = (unsigned int)__pa(skb->data);
--		SET_WPTR(TOE_GLOBAL_BASE+GLOBAL_SWFQ_RWPTR_REG, fq_rwptr.bits.wptr);
--		toe_private_data.fq_rx_rwptr.bits32 = fq_rwptr.bits32;
-+	writel(0x07960202, TOE_GMAC0_BASE+GMAC_CONFIG0);
-+		SET_WPTR(TOE_GLOBAL_BASE+GLOBAL_SWFQ_RWPTR_REG, index);
-+	writel(0x07960200, TOE_GMAC0_BASE+GMAC_CONFIG0);
-+
-+		index = RWPTR_ADVANCE_ONE(index, TOE_SW_FREEQ_DESC_NUM);
-+		fq_desc = (GMAC_RXDESC_T*)toe_private_data.swfq_desc_base+index;
- 	}
-+out:
- 	// spin_unlock_irqrestore(&gmac_fq_lock, flags);
-+
-+	entered = 0;
- }
- // EXPORT_SYMBOL(toe_gmac_fill_free_q);
- 
-@@ -2442,14 +2487,14 @@
- 	unsigned int		status3;
- 	unsigned int		status4;
- 
--	printk("%s\n", message);
--
- 	status0 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_STATUS_0_REG);
- 	status1 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_STATUS_1_REG);
- 	status2 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_STATUS_2_REG);
- 	status3 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_STATUS_3_REG);
- 	status4 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_STATUS_4_REG);
- 
-+	printk("%s\n", message);
-+
- 	printk("status: s0:%08X, s1:%08X, s2:%08X, s3:%08X, s4:%08X\n",
- 		   status0, status1, status2, status3, status4);
- 
-@@ -2468,8 +2513,9 @@
- 	status3 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_3_REG);
- 	status4 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_4_REG);
- 
--	printk("select: s0:%08X, s1:%08X, s2:%08X, s3:%08X, s4:%08X\n",
--		   status0, status1, status2, status3, status4);
-+	if (status0 || status1 || status2 || status3 || status4)
-+			printk("select: s0:%08X, s1:%08X, s2:%08X, s3:%08X, s4:%08X\n",
-+				   status0, status1, status2, status3, status4);
- }
- /*----------------------------------------------------------------------
- * toe_gmac_interrupt
-@@ -2485,75 +2531,44 @@
- 	unsigned int		status3;
- 	unsigned int		status4;
- 
--//	struct net_device_stats *isPtr = (struct net_device_stats *)&tp->ifStatics;
- 	toe = (TOE_INFO_T *)&toe_private_data;
--//	handle NAPI
--#ifdef CONFIG_SL_NAPI
--	/* XXX: check this, changed from 'storlink_ctl.pauseoff == 1' to if (1) */
--if (1)
--{
--/* disable GMAC interrupt */
--    //toe_gmac_disable_interrupt(tp->irq);
- 
--//	isPtr->interrupts++;
-+	if (0 && rx_poll_enabled) {
-+		gmac_registers("interrupt handler");
-+	}
-+
- 	/* read Interrupt status */
- 	status0 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_STATUS_0_REG);
- 	status1 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_STATUS_1_REG);
- 	status2 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_STATUS_2_REG);
- 	status3 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_STATUS_3_REG);
- 	status4 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_STATUS_4_REG);
--	// prompt warning if status bit ON but not enabled
-+
- #if 0
--	if (status0 & ~tp->intr0_enabled)
--		printk("Intr 0 Status error. status = 0x%X, enable = 0x%X\n",
--				status0, tp->intr0_enabled);
--	if (status1 & ~tp->intr1_enabled)
--		printk("Intr 1 Status error. status = 0x%X, enable = 0x%X\n",
--				status1, tp->intr1_enabled);
--	if (status2 & ~tp->intr2_enabled)
--		printk("Intr 2 Status error. status = 0x%X, enable = 0x%X\n",
--				status2, tp->intr2_enabled);
--	if (status3 & ~tp->intr3_enabled)
--		printk("Intr 3 Status error. status = 0x%X, enable = 0x%X\n",
--				status3, tp->intr3_enabled);
--	if (status4 & ~tp->intr4_enabled)
--		printk("Intr 4 Status error. status = 0x%X, enable = 0x%X\n",
--				status4, tp->intr4_enabled);
-+	/* handle freeq interrupt first */
-+	if (status4 & SWFQ_EMPTY_INT_BIT)
-+	{
-+		toe_gmac_fill_free_q();
-+		writel(status4 & SWFQ_EMPTY_INT_BIT, TOE_GLOBAL_BASE+GLOBAL_INTERRUPT_STATUS_4_REG);
-+		tp->sw_fq_empty_cnt++;
-+	}
- #endif
- 
-+	if (status4 & GMAC0_MIB_INT_BIT)
-+		writel(GMAC0_MIB_INT_BIT, TOE_GLOBAL_BASE+GLOBAL_INTERRUPT_STATUS_4_REG);
-+
-+	if (status4 & GMAC0_RX_OVERRUN_INT_BIT)
-+		writel(GMAC0_RX_OVERRUN_INT_BIT, TOE_GLOBAL_BASE+GLOBAL_INTERRUPT_STATUS_4_REG);
-+
- 	if (status0)
- 		writel(status0 & tp->intr0_enabled, TOE_GLOBAL_BASE+GLOBAL_INTERRUPT_STATUS_0_REG);
--	if (status1)
--		writel(status1 & tp->intr1_enabled, TOE_GLOBAL_BASE+GLOBAL_INTERRUPT_STATUS_1_REG);
- 	if (status2)
- 		writel(status2 & tp->intr2_enabled, TOE_GLOBAL_BASE+GLOBAL_INTERRUPT_STATUS_2_REG);
- 	if (status3)
- 		writel(status3 & tp->intr3_enabled, TOE_GLOBAL_BASE+GLOBAL_INTERRUPT_STATUS_3_REG);
--	if (status4)
--		writel(status4 & tp->intr4_enabled, TOE_GLOBAL_BASE+GLOBAL_INTERRUPT_STATUS_4_REG);
--
--#if 0
--	/* handle freeq interrupt first */
--	if (status4 & tp->intr4_enabled) {
--		if ((status4 & SWFQ_EMPTY_INT_BIT) && (tp->intr4_enabled & SWFQ_EMPTY_INT_BIT))
--		{
--			// unsigned long data = REG32(TOE_GLOBAL_BASE + GLOBAL_SWFQ_RWPTR_REG);
--			//gmac_write_reg(TOE_GLOBAL_BASE, GLOBAL_INTERRUPT_ENABLE_4_REG,
--			//	tp->intr4_enabled & ~SWFQ_EMPTY_INT_BIT, SWFQ_EMPTY_INT_BIT);
--
--			if (toe->gmac[0].dev && netif_running(toe->gmac[0].dev))
--				toe_gmac_handle_default_rxq(toe->gmac[0].dev,&toe->gmac[0]);
--			if (toe->gmac[1].dev && netif_running(toe->gmac[1].dev))
--				toe_gmac_handle_default_rxq(toe->gmac[1].dev,&toe->gmac[1]);
--			printk("\nfreeq int\n");
--			toe_gmac_fill_free_q();
--			tp->sw_fq_empty_cnt++;
- 
--		}
--	}
--#endif
- 	// Interrupt Status 1
--	if (status1 & tp->intr1_enabled)
-+	if ((status1 & 3) || (status4 & 1))
- 	{
- 		#define G1_INTR0_BITS	(GMAC1_HWTQ13_EOF_INT_BIT | GMAC1_HWTQ12_EOF_INT_BIT | GMAC1_HWTQ11_EOF_INT_BIT | GMAC1_HWTQ10_EOF_INT_BIT)
- 		#define G0_INTR0_BITS	(GMAC0_HWTQ03_EOF_INT_BIT | GMAC0_HWTQ02_EOF_INT_BIT | GMAC0_HWTQ01_EOF_INT_BIT | GMAC0_HWTQ00_EOF_INT_BIT)
-@@ -2563,7 +2578,7 @@
- 		// because they should pass packets to upper layer
- 		if (tp->port_id == 0)
- 		{
--			if (netif_running(dev) && (status1 & G0_INTR0_BITS) && (tp->intr1_enabled & G0_INTR0_BITS))
-+			if (((status1 & G0_INTR0_BITS) && (tp->intr1_enabled & G0_INTR0_BITS)) || (status4 & 1))
- 			{
- 				if (status1 & GMAC0_HWTQ03_EOF_INT_BIT)
- 					tp->hwtxq[3].eof_cnt++;
-@@ -2574,50 +2589,51 @@
- 				if (status1 & GMAC0_HWTQ00_EOF_INT_BIT)
- 					tp->hwtxq[0].eof_cnt++;
- 			}
--				if (netif_running(dev) && (status1 & DEFAULT_Q0_INT_BIT) && (tp->intr1_enabled & DEFAULT_Q0_INT_BIT))
-+			if (status1 & DEFAULT_Q0_INT_BIT || status4 & 1)
-+			{
-+				if (likely(netif_rx_schedule_prep(dev)))
- 				{
--					if (!rx_poll_enabled && likely(netif_rx_schedule_prep(dev)))
--        			{
--        				unsigned int data32;
-+					unsigned int data32;
-+
-+					BUG_ON(rx_poll_enabled == 1);
- 
--						if (rx_poll_enabled)
--								gmac_registers("check #1");
-+					/* Masks GMAC-0 rx interrupt */
-+					data32  = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_1_REG);
-+					data32 &= ~(DEFAULT_Q0_INT_BIT);
-+					writel(data32, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_1_REG);
- 
--						BUG_ON(rx_poll_enabled == 1);
-+					/* Masks GMAC-0 queue empty interrupt */
-+					data32  = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_4_REG);
-+					data32 &= ~DEFAULT_Q0_INT_BIT;
-+					writel(data32, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_4_REG);
- 
-+					__netif_rx_schedule(dev);
-+					rx_poll_enabled = 1;
-+				} else {
- #if 0
--        				/* Masks GMAC-0 rx interrupt */
--						data32  = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_1_REG);
--						data32 &= ~(DEFAULT_Q0_INT_BIT);
--						writel(data32, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_1_REG);
--
--        				/* Masks GMAC-0 queue empty interrupt */
--						data32  = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_4_REG);
--						data32 &= ~DEFAULT_Q0_INT_BIT;
--						writel(data32, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_4_REG);
--
--						data32  = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_4_REG);
--						data32 &= ~DEFAULT_Q0_INT_BIT;
--						writel(data32, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_4_REG);
--#endif
--
--        				// class-Q & TOE-Q are implemented in future
--        				//data32 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_1_REG);
--        				//data32 &= ~DEFAULT_Q0_INT_BIT;
--						//writel(data32, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_1_REG);
--						//printk("\%s: DEFAULT_Q0_INT_BIT===================>>>>>>>>>>>>\n",__func__);
--						writel(0x0, TOE_GLOBAL_BASE+GLOBAL_INTERRUPT_ENABLE_1_REG);
--						//tp->total_q_cnt_napi=0;
--						//rx_time = jiffies;
--						//rx_old_bytes = isPtr->rx_bytes;
--						__netif_rx_schedule(dev);
--						rx_poll_enabled = 1;
--        			}
-+					unsigned int data32;
-+
-+					if (rx_poll_enabled)
-+						gmac_registers("->poll() running.");
-+					/* Masks GMAC-0 rx interrupt */
-+					data32  = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_1_REG);
-+					data32 &= ~(DEFAULT_Q0_INT_BIT);
-+					writel(data32, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_1_REG);
-+
-+					/* Masks GMAC-0 queue empty interrupt */
-+					data32  = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_4_REG);
-+					data32 &= ~DEFAULT_Q0_INT_BIT;
-+					writel(data32, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_4_REG);
-+#endif
-+				}
-+			} else {
-+				if (0)
-+					gmac_registers("status1 & DEFAULT_Q0_INT_BIT || status4 & 1");
- 			}
- 		}
--		else if (tp->port_id == 1)
-+		else if (tp->port_id == 1 && netif_running(dev))
- 		{
--			if (netif_running(dev) && (status1 & G1_INTR0_BITS) && (tp->intr1_enabled & G1_INTR0_BITS))
-+			if ((status1 & G1_INTR0_BITS) && (tp->intr1_enabled & G1_INTR0_BITS))
- 			{
- 				if (status1 & GMAC1_HWTQ13_EOF_INT_BIT)
- 					tp->hwtxq[3].eof_cnt++;
-@@ -2629,14 +2645,14 @@
- 					tp->hwtxq[0].eof_cnt++;
- 			}
- 
--			if (netif_running(dev) && (status1 & DEFAULT_Q1_INT_BIT) && (tp->intr1_enabled & DEFAULT_Q1_INT_BIT))
-+			if ((status1 & DEFAULT_Q1_INT_BIT) && (tp->intr1_enabled & DEFAULT_Q1_INT_BIT))
- 			{
- 				if (!rx_poll_enabled && likely(netif_rx_schedule_prep(dev)))
--        		{
--        			unsigned int data32;
-+				{
-+					unsigned int data32;
- 
- 					if (rx_poll_enabled)
--							gmac_registers("check #2");
-+						gmac_registers("check #2");
- 
- 					BUG_ON(rx_poll_enabled == 1);
- 
-@@ -2646,7 +2662,7 @@
- 					data32 &= ~(DEFAULT_Q1_INT_BIT);
- 					writel(data32, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_1_REG);
- 
--        			/* Masks GMAC-1 queue empty interrupt */
-+					/* Masks GMAC-1 queue empty interrupt */
- 					data32  = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_4_REG);
- 					data32 &= ~DEFAULT_Q1_INT_BIT;
- 					writel(data32, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_4_REG);
-@@ -2656,24 +2672,21 @@
- 					writel(data32, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_4_REG);
- #endif
- 
--         			// disable GMAC-0 rx interrupt
--        			// class-Q & TOE-Q are implemented in future
--        			//data32 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_1_REG);
--        			//data32 &= ~DEFAULT_Q1_INT_BIT;
-+					// disable GMAC-0 rx interrupt
-+					// class-Q & TOE-Q are implemented in future
-+					//data32 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_1_REG);
-+					//data32 &= ~DEFAULT_Q1_INT_BIT;
- 					//writel(data32, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_1_REG);
- 					//printk("\%s: 1111111111--->DEFAULT_Q1_INT_BIT===================>>>>>>>>>>>>\n",__func__);
- 					writel(0x0, TOE_GLOBAL_BASE+GLOBAL_INTERRUPT_ENABLE_1_REG);
- 					//tp->total_q_cnt_napi=0;
- 					//rx_time = jiffies;
- 					//rx_old_bytes = isPtr->rx_bytes;
--           			__netif_rx_schedule(dev);
--				rx_poll_enabled = 1;
--        		}
-+					__netif_rx_schedule(dev);
-+					rx_poll_enabled = 1;
-+				}
- 			}
- 		}
--	} else {
--
--		gmac_registers("check #3");
- 	}
- 
- 	// Interrupt Status 0
-@@ -2814,676 +2827,93 @@
- 		}
- 	}
- 
--	//toe_gmac_enable_interrupt(tp->irq);
--#ifdef IxscriptMate_1518
--	if (storlink_ctl.pauseoff == 1)
--	{
--		GMAC_CONFIG0_T config0;
--		config0.bits32 = readl(TOE_GMAC0_BASE+GMAC_CONFIG0);
--		config0.bits.dis_rx = 0;
--		writel(config0.bits32, TOE_GMAC0_BASE+GMAC_CONFIG0);
--		config0.bits32 = readl(TOE_GMAC1_BASE+GMAC_CONFIG0);
--		config0.bits.dis_rx = 0;
--		writel(config0.bits32, TOE_GMAC1_BASE+GMAC_CONFIG0);
--	}
--#endif
--//	 enable_irq(gmac_irq[dev_index]);
--	//printk("gmac_interrupt complete!\n\n");
--//	return IRQ_RETVAL(handled);
- 	return	IRQ_RETVAL(1);
- }
--else
--{
--#endif	//endif NAPI
- 
-+/*----------------------------------------------------------------------
-+* gmac_get_phy_vendor
-+*----------------------------------------------------------------------*/
-+static unsigned int gmac_get_phy_vendor(int phy_addr)
-+{
-+    unsigned int	reg_val;
-+    reg_val=(mii_read(phy_addr,0x02) << 16) + mii_read(phy_addr,0x03);
-+    return reg_val;
-+}
- 
--	/* disable GMAC interrupt */
--    toe_gmac_disable_interrupt(tp->irq);
-+/*----------------------------------------------------------------------
-+* gmac_set_phy_status
-+*----------------------------------------------------------------------*/
-+void gmac_set_phy_status(struct net_device *dev)
-+{
-+	GMAC_INFO_T *tp = dev->priv;
-+	GMAC_STATUS_T   status;
-+	unsigned int    reg_val, ability,wan_port_id;
-+	unsigned int    i = 0;
- 
--//	isPtr->interrupts++;
--	/* read Interrupt status */
--	status0 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_STATUS_0_REG);
--	status1 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_STATUS_1_REG);
--	status2 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_STATUS_2_REG);
--	status3 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_STATUS_3_REG);
--	status4 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_STATUS_4_REG);
--	// prompt warning if status bit ON but not enabled
-+#ifdef VITESSE_G5SWITCH
-+	if((tp->port_id == GMAC_PORT1)&&(Giga_switch==1)){
- #if 0
--	if (status0 & ~tp->intr0_enabled)
--		printk("Intr 0 Status error. status = 0x%X, enable = 0x%X\n",
--				status0, tp->intr0_enabled);
--	if (status1 & ~tp->intr1_enabled)
--		printk("Intr 1 Status error. status = 0x%X, enable = 0x%X\n",
--				status1, tp->intr1_enabled);
--	if (status2 & ~tp->intr2_enabled)
--		printk("Intr 2 Status error. status = 0x%X, enable = 0x%X\n",
--				status2, tp->intr2_enabled);
--	if (status3 & ~tp->intr3_enabled)
--		printk("Intr 3 Status error. status = 0x%X, enable = 0x%X\n",
--				status3, tp->intr3_enabled);
--	if (status4 & ~tp->intr4_enabled)
--		printk("Intr 4 Status error. status = 0x%X, enable = 0x%X\n",
--				status4, tp->intr4_enabled);
--#endif
--#define	INTERRUPT_SELECT			1
--	if (status0)
--		writel(status0 & tp->intr0_enabled, TOE_GLOBAL_BASE+GLOBAL_INTERRUPT_STATUS_0_REG);
--	if (status1)
--		writel(status1 & tp->intr1_enabled, TOE_GLOBAL_BASE+GLOBAL_INTERRUPT_STATUS_1_REG);
--	if (status2)
--		writel(status2 & tp->intr2_enabled, TOE_GLOBAL_BASE+GLOBAL_INTERRUPT_STATUS_2_REG);
--	if (status3)
--		writel(status3 & tp->intr3_enabled, TOE_GLOBAL_BASE+GLOBAL_INTERRUPT_STATUS_3_REG);
--	if (status4)
--		writel(status4 & tp->intr4_enabled, TOE_GLOBAL_BASE+GLOBAL_INTERRUPT_STATUS_4_REG);
--
--	/* handle freeq interrupt first */
--	if (status4 & tp->intr4_enabled) {
--		if ((status4 & SWFQ_EMPTY_INT_BIT) && (tp->intr4_enabled & SWFQ_EMPTY_INT_BIT))
--		{
--			// unsigned long data = REG32(TOE_GLOBAL_BASE + GLOBAL_SWFQ_RWPTR_REG);
--			//gmac_write_reg(TOE_GLOBAL_BASE, GLOBAL_INTERRUPT_ENABLE_4_REG,
--			//	tp->intr4_enabled & ~SWFQ_EMPTY_INT_BIT, SWFQ_EMPTY_INT_BIT);
--
--			//gmac_write_reg(TOE_GLOBAL_BASE, GLOBAL_INTERRUPT_STATUS_4_REG,
--			//	SWFQ_EMPTY_INT_BIT, SWFQ_EMPTY_INT_BIT);
--			if (toe->gmac[0].dev && netif_running(toe->gmac[0].dev))
--				toe_gmac_handle_default_rxq(toe->gmac[0].dev,&toe->gmac[0]);
--			if (toe->gmac[1].dev && netif_running(toe->gmac[1].dev))
--				toe_gmac_handle_default_rxq(toe->gmac[1].dev,&toe->gmac[1]);
--			printk("\nfreeq int\n");
--			toe_gmac_fill_free_q();
--			tp->sw_fq_empty_cnt++;
--
--			gmac_write_reg(TOE_GLOBAL_BASE, GLOBAL_INTERRUPT_STATUS_4_REG, status4,
--				SWFQ_EMPTY_INT_BIT);
--		}
--	}
--
--	// Interrupt Status 1
--	if (status1 & tp->intr1_enabled)
--	{
--		#define G1_INTR0_BITS	(GMAC1_HWTQ13_EOF_INT_BIT | GMAC1_HWTQ12_EOF_INT_BIT | GMAC1_HWTQ11_EOF_INT_BIT | GMAC1_HWTQ10_EOF_INT_BIT)
--		#define G0_INTR0_BITS	(GMAC0_HWTQ03_EOF_INT_BIT | GMAC0_HWTQ02_EOF_INT_BIT | GMAC0_HWTQ01_EOF_INT_BIT | GMAC0_HWTQ00_EOF_INT_BIT)
--		// Handle GMAC 0/1 HW Tx queue 0-3 EOF events
--		// Only count
--		// TOE, Classification, and default queues interrupts are handled by ISR
--		// because they should pass packets to upper layer
--		if (tp->port_id == 0)
--		{
--#ifndef	INTERRUPT_SELECT
--			if (netif_running(dev) && (status1 & G0_INTR0_BITS) && (tp->intr1_enabled & G0_INTR0_BITS))
--			{
--				if (status1 & GMAC0_HWTQ03_EOF_INT_BIT)
--					tp->hwtxq[3].eof_cnt++;
--				if (status1 & GMAC0_HWTQ02_EOF_INT_BIT)
--					tp->hwtxq[2].eof_cnt++;
--				if (status1 & GMAC0_HWTQ01_EOF_INT_BIT)
--					tp->hwtxq[1].eof_cnt++;
--				if (status1 & GMAC0_HWTQ00_EOF_INT_BIT)
--					tp->hwtxq[0].eof_cnt++;
--#endif	//INTERRUPT_SELECT
--#ifndef	INTERRUPT_SELECT
--			}
--#endif	//INTERRUPT_SELECT
--			if (netif_running(dev) && (status1 & DEFAULT_Q0_INT_BIT) && (tp->intr1_enabled & DEFAULT_Q0_INT_BIT))
--			{
--				tp->default_q_intr_cnt++;
--				toe_gmac_handle_default_rxq(dev, tp);
-+		rcv_mask = SPI_read(2,0,0x10);			// Receive mask
-+		rcv_mask |= 0x4F;
-+		for(i=0;i<4;i++){
-+			reg_val = BIT(26)|(i<<21)|(10<<16);
-+			SPI_write(3,0,1,reg_val);
-+			msleep(10);
-+			reg_val = SPI_read(3,0,2);
-+			if(reg_val & 0x0c00){
-+				printk("Port%d:Giga mode\n",i);
-+				SPI_write(1,i,0x00,0x300701B1);
-+				SPI_write(1,i,0x00,0x10070181);
-+				switch_pre_link[i]=LINK_UP;
-+				switch_pre_speed[i]=GMAC_SPEED_1000;
- 			}
--#ifdef CONFIG_SL351x_RXTOE
--			if (netif_running(dev) && (status1 & TOE_IQ_ALL_BITS) &&
--			    (tp->intr1_enabled & TOE_IQ_ALL_BITS)) {
--				//printk("status %x, bits %x, slct %x\n", status1, TOE_IQ_ALL_BITS, tp->intr1_selected);
--				toe_gmac_handle_toeq(dev, tp, status1);
--				//toe_gmac_handle_toeq(dev, toe, tp, status1);
-+			else{
-+				reg_val = BIT(26)|(i<<21)|(5<<16);
-+				SPI_write(3,0,1,reg_val);
-+				msleep(10);
-+				ability = (reg_val = SPI_read(3,0,2)&0x5e0) >>5;
-+				if ((ability & 0x0C)) /* 100M full duplex */
-+				{
-+					SPI_write(1,i,0x00,0x30050472);
-+					SPI_write(1,i,0x00,0x10050442);
-+					printk("Port%d:100M\n",i);
-+					switch_pre_link[i]=LINK_UP;
-+				switch_pre_speed[i]=GMAC_SPEED_100;
-+				}
-+				else if((ability & 0x03)) /* 10M full duplex */
-+				{
-+					SPI_write(1,i,0x00,0x30050473);
-+					SPI_write(1,i,0x00,0x10050443);
-+					printk("Port%d:10M\n",i);
-+					switch_pre_link[i]=LINK_UP;
-+					switch_pre_speed[i]=GMAC_SPEED_10;
-+				}
-+				else{
-+					SPI_write(1,i,0x00,BIT(16));			// disable RX
-+					SPI_write(5,0,0x0E,BIT(i));			// dicard packet
-+					while((SPI_read(5,0,0x0C)&BIT(i))==0)		// wait to be empty
-+						msleep(1);
-+
-+					SPI_write(1,i,0x00,0x20000030);			// PORT_RST
-+					switch_pre_link[i]=LINK_DOWN;
-+					switch_pre_speed[i]=GMAC_SPEED_10;
-+					rcv_mask &= ~BIT(i);
-+					SPI_write(2,0,0x10,rcv_mask);			// Disable Receive
-+				}
- 			}
--#endif
- 		}
--		else if (tp->port_id == 1)
--		{
--#ifndef	INTERRUPT_SELECT
--			if (netif_running(dev) && (status1 & G1_INTR0_BITS) && (tp->intr1_enabled & G1_INTR0_BITS))
--			{
--				if (status1 & GMAC1_HWTQ13_EOF_INT_BIT)
--					tp->hwtxq[3].eof_cnt++;
--				if (status1 & GMAC1_HWTQ12_EOF_INT_BIT)
--					tp->hwtxq[2].eof_cnt++;
--				if (status1 & GMAC1_HWTQ11_EOF_INT_BIT)
--					tp->hwtxq[1].eof_cnt++;
--				if (status1 & GMAC1_HWTQ10_EOF_INT_BIT)
--					tp->hwtxq[0].eof_cnt++;
--#endif	//INTERRUPT_SELECT
--#ifndef	INTERRUPT_SELECT
--			}
--#endif	//INTERRUPT_SELECT
--			if (netif_running(dev) && (status1 & DEFAULT_Q1_INT_BIT) && (tp->intr1_enabled & DEFAULT_Q1_INT_BIT))
--			{
--				tp->default_q_intr_cnt++;
--				toe_gmac_handle_default_rxq(dev, tp);
--			}
--#ifdef CONFIG_SL351x_RXTOE
--			if (netif_running(dev) && (status1 & TOE_IQ_ALL_BITS) &&
--			    (tp->intr1_enabled & TOE_IQ_ALL_BITS)) {
--				//printk("status %x, bits %x, slct %x\n", status1, TOE_IQ_ALL_BITS, tp->intr1_selected);
--				toe_gmac_handle_toeq(dev, tp, status1);
--				//toe_gmac_handle_toeq(dev, toe, tp, status1);
--			}
- #endif
--		}
-+		gmac_get_switch_status(dev);
-+		gmac_write_reg(tp->base_addr, GMAC_STATUS, 0x7d, 0x0000007f);
-+//		SPI_write(2,0,0x10,rcv_mask);			// Enable Receive
-+		return ;
- 	}
-+#endif
- 
-+	reg_val = gmac_get_phy_vendor(tp->phy_addr);
-+	printk("GMAC-%d Addr %d Vendor ID: 0x%08x\n", tp->port_id, tp->phy_addr, reg_val);
- 
--	// Interrupt Status 0
--	if (status0 & tp->intr0_enabled)
--	{
--
--		#define ERR_INTR_BITS	(GMAC0_TXDERR_INT_BIT | GMAC0_TXPERR_INT_BIT |	\
--								 GMAC1_TXDERR_INT_BIT | GMAC1_TXPERR_INT_BIT |	\
--								 GMAC0_RXDERR_INT_BIT | GMAC0_RXPERR_INT_BIT |	\
--								 GMAC1_RXDERR_INT_BIT | GMAC1_RXPERR_INT_BIT)
--#ifndef	INTERRUPT_SELECT
--		if (status0 &  ERR_INTR_BITS)
--		{
--			if ((status0 & GMAC0_TXDERR_INT_BIT) && (tp->intr0_enabled & GMAC0_TXDERR_INT_BIT))
--			{
--				tp->txDerr_cnt[0]++;
--				printk("GMAC0 TX AHB Bus Error!\n");
--			}
--			if ((status0 & GMAC0_TXPERR_INT_BIT) && (tp->intr0_enabled & GMAC0_TXPERR_INT_BIT))
--			{
--				tp->txPerr_cnt[0]++;
--				printk("GMAC0 Tx Descriptor Protocol Error!\n");
--			}
--			if ((status0 & GMAC1_TXDERR_INT_BIT) && (tp->intr0_enabled & GMAC1_TXDERR_INT_BIT))
--			{
--				tp->txDerr_cnt[1]++;
--				printk("GMAC1 Tx AHB Bus Error!\n");
--			}
--			if ((status0 & GMAC1_TXPERR_INT_BIT) && (tp->intr0_enabled & GMAC1_TXPERR_INT_BIT))
--			{
--				tp->txPerr_cnt[1]++;
--				printk("GMAC1 Tx Descriptor Protocol Error!\n");
--			}
--
--			if ((status0 & GMAC0_RXDERR_INT_BIT) && (tp->intr0_enabled & GMAC0_RXDERR_INT_BIT))
--			{
--				tp->RxDerr_cnt[0]++;
--				printk("GMAC0 Rx AHB Bus Error!\n");
--			}
--			if ((status0 & GMAC0_RXPERR_INT_BIT) && (tp->intr0_enabled & GMAC0_RXPERR_INT_BIT))
--			{
--				tp->RxPerr_cnt[0]++;
--				printk("GMAC0 Rx Descriptor Protocol Error!\n");
--			}
--			if ((status0 & GMAC1_RXDERR_INT_BIT) && (tp->intr0_enabled & GMAC1_RXDERR_INT_BIT))
--			{
--				tp->RxDerr_cnt[1]++;
--				printk("GMAC1 Rx AHB Bus Error!\n");
--			}
--			if ((status0 & GMAC1_RXPERR_INT_BIT) && (tp->intr0_enabled & GMAC1_RXPERR_INT_BIT))
--			{
--				tp->RxPerr_cnt[1]++;
--				printk("GMAC1 Rx Descriptor Protocol Error!\n");
--			}
--		}
--#endif	//INTERRUPT_SELECT
--#ifndef	GMAX_TX_INTR_DISABLED
--		if (tp->port_id == 1 &&	netif_running(dev) &&
--			(((status0 & GMAC1_SWTQ10_FIN_INT_BIT) && (tp->intr0_enabled & GMAC1_SWTQ10_FIN_INT_BIT))
--			||
--			((status0 & GMAC1_SWTQ10_EOF_INT_BIT) && (tp->intr0_enabled & GMAC1_SWTQ10_EOF_INT_BIT))))
--		{
--			toe_gmac_tx_complete(&toe_private_data.gmac[1], 0, dev, 1);
--		}
--
--		if (tp->port_id == 0 &&	netif_running(dev) &&
--			(((status0 & GMAC0_SWTQ00_FIN_INT_BIT) && (tp->intr0_enabled & GMAC0_SWTQ00_FIN_INT_BIT))
--			||
--			((status0 & GMAC0_SWTQ00_EOF_INT_BIT) && (tp->intr0_enabled & GMAC0_SWTQ00_EOF_INT_BIT))))
--		{
--			toe_gmac_tx_complete(&toe_private_data.gmac[0], 0, dev, 1);
--		}
--#endif
--		// clear enabled status bits
--	}
--	// Interrupt Status 4
--#ifndef	INTERRUPT_SELECT
--	if (status4 & tp->intr4_enabled)
--	{
--		#define G1_INTR4_BITS		(0xff000000)
--		#define G0_INTR4_BITS		(0x00ff0000)
--
--		if (tp->port_id == 0)
--		{
--			if ((status4 & G0_INTR4_BITS) && (tp->intr4_enabled & G0_INTR4_BITS))
--			{
--				if (status4 & GMAC0_RESERVED_INT_BIT)
--					printk("GMAC0_RESERVED_INT_BIT is ON\n");
--				if (status4 & GMAC0_MIB_INT_BIT)
--					tp->mib_full_cnt++;
--				if (status4 & GMAC0_RX_PAUSE_ON_INT_BIT)
--					tp->rx_pause_on_cnt++;
--				if (status4 & GMAC0_TX_PAUSE_ON_INT_BIT)
--					tp->tx_pause_on_cnt++;
--				if (status4 & GMAC0_RX_PAUSE_OFF_INT_BIT)
--					tp->rx_pause_off_cnt++;
--				if (status4 & GMAC0_TX_PAUSE_OFF_INT_BIT)
--					tp->rx_pause_off_cnt++;
--				if (status4 & GMAC0_RX_OVERRUN_INT_BIT)
--					tp->rx_overrun_cnt++;
--				if (status4 & GMAC0_STATUS_CHANGE_INT_BIT)
--					tp->status_changed_cnt++;
--			}
--		}
--		else if (tp->port_id == 1)
--		{
--			if ((status4 & G1_INTR4_BITS) && (tp->intr4_enabled & G1_INTR4_BITS))
--			{
--				if (status4 & GMAC1_RESERVED_INT_BIT)
--					printk("GMAC1_RESERVED_INT_BIT is ON\n");
--				if (status4 & GMAC1_MIB_INT_BIT)
--					tp->mib_full_cnt++;
--				if (status4 & GMAC1_RX_PAUSE_ON_INT_BIT)
--				{
--					//printk("Gmac pause on\n");
--					tp->rx_pause_on_cnt++;
--				}
--				if (status4 & GMAC1_TX_PAUSE_ON_INT_BIT)
--				{
--					//printk("Gmac pause on\n");
--					tp->tx_pause_on_cnt++;
--				}
--				if (status4 & GMAC1_RX_PAUSE_OFF_INT_BIT)
--				{
--					//printk("Gmac pause off\n");
--					tp->rx_pause_off_cnt++;
--				}
--				if (status4 & GMAC1_TX_PAUSE_OFF_INT_BIT)
--				{
--					//printk("Gmac pause off\n");
--					tp->rx_pause_off_cnt++;
--				}
--				if (status4 & GMAC1_RX_OVERRUN_INT_BIT)
--				{
--					//printk("Gmac Rx Overrun \n");
--					tp->rx_overrun_cnt++;
--				}
--				if (status4 & GMAC1_STATUS_CHANGE_INT_BIT)
--					tp->status_changed_cnt++;
--			}
--		}
--#if 0
--		if ((status4 & SWFQ_EMPTY_INT_BIT) && (tp->intr4_enabled & SWFQ_EMPTY_INT_BIT))
--		{
--			// unsigned long data = REG32(TOE_GLOBAL_BASE + GLOBAL_SWFQ_RWPTR_REG);
--//			mac_stop_rxdma(tp->sc);
--			gmac_write_reg(TOE_GLOBAL_BASE, GLOBAL_INTERRUPT_ENABLE_4_REG,
--				tp->intr4_enabled & ~SWFQ_EMPTY_INT_BIT, SWFQ_EMPTY_INT_BIT);
--
--			gmac_write_reg(TOE_GLOBAL_BASE, GLOBAL_INTERRUPT_STATUS_4_REG,
--				SWFQ_EMPTY_INT_BIT, SWFQ_EMPTY_INT_BIT);
--			toe_gmac_fill_free_q();
--			tp->sw_fq_empty_cnt++;
--
--			gmac_write_reg(TOE_GLOBAL_BASE, GLOBAL_INTERRUPT_STATUS_4_REG, status4,
--				SWFQ_EMPTY_INT_BIT);
--//#if 0
--/*			if (netif_running(dev))
--				toe_gmac_handle_default_rxq(dev, tp);
--			printk("SWFQ_EMPTY_INT_BIT is ON!\n");	// should not be happened */
--//#endif
--		}
--#endif
--	}
--#endif	//INTERRUPT_SELECT
--	toe_gmac_enable_interrupt(tp->irq);
--//enable gmac rx function when do RFC 2544
--#ifdef IxscriptMate_1518
--	if (storlink_ctl.pauseoff == 1)
--	{
--		GMAC_CONFIG0_T config0;
--		config0.bits32 = readl(TOE_GMAC0_BASE+GMAC_CONFIG0);
--		config0.bits.dis_rx = 0;
--		writel(config0.bits32, TOE_GMAC0_BASE+GMAC_CONFIG0);
--		config0.bits32 = readl(TOE_GMAC1_BASE+GMAC_CONFIG0);
--		config0.bits.dis_rx = 0;
--		writel(config0.bits32, TOE_GMAC1_BASE+GMAC_CONFIG0);
--	}
--#endif
--	//printk("gmac_interrupt complete!\n\n");
--//	return IRQ_RETVAL(handled);
--	return	IRQ_RETVAL(1);
--#ifdef CONFIG_SL_NAPI
--}
--#endif
--}
--
--/*----------------------------------------------------------------------
--*	toe_gmac_handle_default_rxq
--*	(1) Get rx Buffer for default Rx queue
--*	(2) notify or call upper-routine to handle it
--*	(3) get a new buffer and insert it into SW free queue
--*	(4) Note: The SW free queue Read-Write Pointer should be locked when accessing
--*----------------------------------------------------------------------*/
--//static inline void toe_gmac_handle_default_rxq(struct net_device *dev, GMAC_INFO_T *tp)
--static void toe_gmac_handle_default_rxq(struct net_device *dev, GMAC_INFO_T *tp)
--{
--	TOE_INFO_T			*toe;
--    GMAC_RXDESC_T   	*curr_desc;
--	struct sk_buff 		*skb;
--    DMA_RWPTR_T			rwptr;
--	unsigned int 		pkt_size;
--	int					max_cnt;
--	unsigned int        desc_count;
--	unsigned int        good_frame, chksum_status, rx_status;
--	struct net_device_stats *isPtr = (struct net_device_stats *)&tp->ifStatics;
--
--//when do ixia RFC 2544 test and packet size is select 1518 bytes,disable gmace rx function immediately after one interrupt come in.
--#ifdef IxscriptMate_1518
--	if (storlink_ctl.pauseoff == 1)
--	{
--		GMAC_CONFIG0_T config0;
--		config0.bits32 = readl(TOE_GMAC0_BASE+GMAC_CONFIG0);
--		config0.bits.dis_rx = 1;
--		writel(config0.bits32, TOE_GMAC0_BASE+GMAC_CONFIG0);
--		config0.bits32 = readl(TOE_GMAC1_BASE+GMAC_CONFIG0);
--		config0.bits.dis_rx = 1;
--		writel(config0.bits32, TOE_GMAC1_BASE+GMAC_CONFIG0);
--	}
--#endif
--	rwptr.bits32 = readl(&tp->default_qhdr->word1);
--#if 0
--	if (rwptr.bits.rptr != tp->rx_rwptr.bits.rptr)
--	{
--		mac_stop_txdma((struct net_device *)tp->dev);
--		printk("Default Queue HW RD ptr (0x%x) != SW RD Ptr (0x%x)\n",
--				rwptr.bits32, tp->rx_rwptr.bits.rptr);
--		while(1);
--	}
--#endif
--	toe = (TOE_INFO_T *)&toe_private_data;
--	max_cnt = DEFAULT_RXQ_MAX_CNT;
--	while ((--max_cnt) && rwptr.bits.rptr != rwptr.bits.wptr)
--//	while (rwptr.bits.rptr != rwptr.bits.wptr)
--	{
--//if packet size is not 1518 for RFC 2544,enable gmac rx function.The other packet size have RX workaround.
--#ifdef IxscriptMate_1518
--    	if (storlink_ctl.pauseoff == 1)
--		{
--			if (pkt_size != 1514)
--			{
--						GMAC_CONFIG0_T config0;
--						config0.bits32 = readl(TOE_GMAC0_BASE+GMAC_CONFIG0);
--						config0.bits.dis_rx = 0;
--						writel(config0.bits32, TOE_GMAC0_BASE+GMAC_CONFIG0);
--						config0.bits32 = readl(TOE_GMAC1_BASE+GMAC_CONFIG0);
--						config0.bits.dis_rx = 0;
--						writel(config0.bits32, TOE_GMAC1_BASE+GMAC_CONFIG0);
--			}
--		}
--#endif
--    	curr_desc = (GMAC_RXDESC_T *)tp->default_desc_base + rwptr.bits.rptr;
--//		consistent_sync(curr_desc, sizeof(GMAC_RXDESC_T), PCI_DMA_FROMDEVICE);
--		tp->default_q_cnt++;
--    	tp->rx_curr_desc = (unsigned int)curr_desc;
--    	rx_status = curr_desc->word0.bits.status;
--    	chksum_status = curr_desc->word0.bits.chksum_status;
--    	tp->rx_status_cnt[rx_status]++;
--    	tp->rx_chksum_cnt[chksum_status]++;
--        pkt_size = curr_desc->word1.bits.byte_count;  /*total byte count in a frame*/
--		desc_count = curr_desc->word0.bits.desc_count; /* get descriptor count per frame */
--		good_frame=1;
--		if ((curr_desc->word0.bits32 & (GMAC_RXDESC_0_T_derr | GMAC_RXDESC_0_T_perr))
--			|| (pkt_size < 60)
--		    || (chksum_status & 0x4)
--			|| rx_status)
--		{
--			good_frame = 0;
--			if (curr_desc->word0.bits32 & GMAC_RXDESC_0_T_derr)
--				printk("%s::derr (GMAC-%d)!!!\n", __func__, tp->port_id);
--			if (curr_desc->word0.bits32 & GMAC_RXDESC_0_T_perr)
--				printk("%s::perr (GMAC-%d)!!!\n", __func__, tp->port_id);
--			if (rx_status)
--			{
--				if (rx_status == 4 || rx_status == 7)
--					isPtr->rx_crc_errors++;
--//				printk("%s::Status=%d (GMAC-%d)!!!\n", __func__, rx_status, tp->port_id);
--			}
--#ifdef SL351x_GMAC_WORKAROUND
--			else if (pkt_size < 60)
--			{
--				if (tp->short_frames_cnt < GMAC_SHORT_FRAME_THRESHOLD)
--					tp->short_frames_cnt++;
--				if (tp->short_frames_cnt >= GMAC_SHORT_FRAME_THRESHOLD)
--				{
--					GMAC_CONFIG0_T config0;
--					config0.bits32 = readl(TOE_GMAC0_BASE+GMAC_CONFIG0);
--					config0.bits.dis_rx = 1;
--					writel(config0.bits32, TOE_GMAC0_BASE+GMAC_CONFIG0);
--					config0.bits32 = readl(TOE_GMAC1_BASE+GMAC_CONFIG0);
--					config0.bits.dis_rx = 1;
--					writel(config0.bits32, TOE_GMAC1_BASE+GMAC_CONFIG0);
--				}
--			}
--#endif
--//			if (chksum_status)
--//				printk("%s::Checksum Status=%d (GMAC-%d)!!!\n", __func__, chksum_status, tp->port_id);
--			skb = (struct sk_buff *)(REG32(__va(curr_desc->word2.buf_adr) - SKB_RESERVE_BYTES));
--			dev_kfree_skb_irq(skb);
--		}
--		if (good_frame)
--		{
--			if (curr_desc->word0.bits.drop)
--				printk("%s::Drop (GMAC-%d)!!!\n", __func__, tp->port_id);
--//			if (chksum_status)
--//				printk("%s::Checksum Status=%d (GMAC-%d)!!!\n", __func__, chksum_status, tp->port_id);
--
--	    	/* get frame information from the first descriptor of the frame */
--#ifdef SL351x_GMAC_WORKAROUND
--			if (tp->short_frames_cnt >= GMAC_SHORT_FRAME_THRESHOLD)
--			{
--				GMAC_CONFIG0_T config0;
--				config0.bits32 = readl(TOE_GMAC0_BASE+GMAC_CONFIG0);
--				config0.bits.dis_rx = 0;
--				writel(config0.bits32, TOE_GMAC0_BASE+GMAC_CONFIG0);
--				config0.bits32 = readl(TOE_GMAC1_BASE+GMAC_CONFIG0);
--				config0.bits.dis_rx = 0;
--				writel(config0.bits32, TOE_GMAC1_BASE+GMAC_CONFIG0);
--			}
--			tp->short_frames_cnt = 0;
--#endif
--			isPtr->rx_packets++;
--			skb = (struct sk_buff *)(REG32(__va(curr_desc->word2.buf_adr - SKB_RESERVE_BYTES)));
--			if (!skb)
--			{
--				printk("Fatal Error!!skb==NULL\n");
--				goto next_rx;
--			}
--			tp->curr_rx_skb = skb;
--			// consistent_sync((void *)__va(curr_desc->word2.buf_adr), pkt_size, PCI_DMA_FROMDEVICE);
--
--	//		curr_desc->word2.buf_adr = 0;
--
--			skb_reserve (skb, RX_INSERT_BYTES);	/* 16 byte align the IP fields. */
--			skb_put(skb, pkt_size);
--			skb->dev = dev;
--			if (chksum_status == RX_CHKSUM_IP_UDP_TCP_OK)
--			{
--				skb->ip_summed = CHECKSUM_UNNECESSARY;
--#ifdef CONFIG_SL351x_NAT
--				if (nat_cfg.enabled && curr_desc->word3.bits.l3_offset && curr_desc->word3.bits.l4_offset)
--				{
--					struct iphdr	*ip_hdr;
--					ip_hdr = (struct iphdr *)&(skb->data[curr_desc->word3.bits.l3_offset]);
--					sl351x_nat_input(skb,
--									tp->port_id,
--									(void *)curr_desc->word3.bits.l3_offset,
--								  	(void *)curr_desc->word3.bits.l4_offset);
--				}
--#endif
--				skb->protocol = eth_type_trans(skb,dev); /* set skb protocol */
--#if 0
--#ifdef CONFIG_SL351x_RXTOE
--				if (storlink_ctl.rx_max_pktsize) {
--					struct iphdr	*ip_hdr;
--					struct tcphdr	*tcp_hdr;
--					int ip_hdrlen;
--
-- 					ip_hdr = (struct iphdr*)&(skb->data[0]);
--					if ((skb->protocol == __constant_htons(ETH_P_IP)) &&
--					   ((ip_hdr->protocol & 0x00ff) == IPPROTO_TCP)) {
--						ip_hdrlen = ip_hdr->ihl << 2;
--						tcp_hdr = (struct tcphdr*)&(skb->data[ip_hdrlen]);
--						if (tcp_hdr->syn) {
--							struct toe_conn* connection = init_toeq(ip_hdr->version,
--									ip_hdr, tcp_hdr, toe, &(skb->data[0]) - 14);
--							TCP_SKB_CB(skb)->connection = connection;
--							//	hash_dump_entry(TCP_SKB_CB(skb)->connection->hash_entry_index);
--							//		printk("%s::skb data %x, conn %x, mode %x\n",
--							//			__func__, skb->data, connection, connection->mode);
--						}
--					}
--				}
--#endif
--#endif
--			}
--			else if (chksum_status == RX_CHKSUM_IP_OK_ONLY)
--			{
--				skb->ip_summed = CHECKSUM_UNNECESSARY;
--#ifdef CONFIG_SL351x_NAT
--				if (nat_cfg.enabled && curr_desc->word3.bits.l3_offset && curr_desc->word3.bits.l4_offset)
--				{
--					struct iphdr		*ip_hdr;
--					//struct tcphdr		*tcp_hdr;
--					ip_hdr = (struct iphdr *)&(skb->data[curr_desc->word3.bits.l3_offset]);
--					//tcp_hdr = (struct tcphdr *)&(skb->data[curr_desc->word3.bits.l4_offset]);
--					if (ip_hdr->protocol == IPPROTO_UDP)
--					{
--						sl351x_nat_input(skb,
--										tp->port_id,
--										(void *)curr_desc->word3.bits.l3_offset,
--								  		(void *)curr_desc->word3.bits.l4_offset);
--					}
--					else if (ip_hdr->protocol == IPPROTO_GRE)
--					{
--						sl351x_nat_input(skb,
--									tp->port_id,
--									(void *)curr_desc->word3.bits.l3_offset,
--								  	(void *)curr_desc->word3.bits.l4_offset);
--					}
--				}
--#endif
--				skb->protocol = eth_type_trans(skb,dev); /* set skb protocol */
--			}
--			else
--			{
--				skb->protocol = eth_type_trans(skb,dev); /* set skb protocol */
--			}
--
--			netif_rx(skb);  /* socket rx */
--			dev->last_rx = jiffies;
--
--			isPtr->rx_bytes += pkt_size;
--
--        }
--
--next_rx:
--		// advance one for Rx default Q 0/1
--		rwptr.bits.rptr = RWPTR_ADVANCE_ONE(rwptr.bits.rptr, tp->default_desc_num);
--		SET_RPTR(&tp->default_qhdr->word1, rwptr.bits.rptr);
--     	tp->rx_rwptr.bits32 = rwptr.bits32;
--
--	}
--
--	/* Handles first available packets only then refill the queue. */
--	toe_gmac_fill_free_q();
--}
--
--/*----------------------------------------------------------------------
--* gmac_get_phy_vendor
--*----------------------------------------------------------------------*/
--static unsigned int gmac_get_phy_vendor(int phy_addr)
--{
--    unsigned int	reg_val;
--    reg_val=(mii_read(phy_addr,0x02) << 16) + mii_read(phy_addr,0x03);
--    return reg_val;
--}
--
--/*----------------------------------------------------------------------
--* gmac_set_phy_status
--*----------------------------------------------------------------------*/
--void gmac_set_phy_status(struct net_device *dev)
--{
--	GMAC_INFO_T *tp = dev->priv;
--	GMAC_STATUS_T   status;
--	unsigned int    reg_val, ability,wan_port_id;
--	unsigned int    i = 0;
--
--#ifdef VITESSE_G5SWITCH
--	if((tp->port_id == GMAC_PORT1)&&(Giga_switch==1)){
--#if 0
--		rcv_mask = SPI_read(2,0,0x10);			// Receive mask
--		rcv_mask |= 0x4F;
--		for(i=0;i<4;i++){
--			reg_val = BIT(26)|(i<<21)|(10<<16);
--			SPI_write(3,0,1,reg_val);
--			msleep(10);
--			reg_val = SPI_read(3,0,2);
--			if(reg_val & 0x0c00){
--				printk("Port%d:Giga mode\n",i);
--				SPI_write(1,i,0x00,0x300701B1);
--				SPI_write(1,i,0x00,0x10070181);
--				switch_pre_link[i]=LINK_UP;
--				switch_pre_speed[i]=GMAC_SPEED_1000;
--			}
--			else{
--				reg_val = BIT(26)|(i<<21)|(5<<16);
--				SPI_write(3,0,1,reg_val);
--				msleep(10);
--				ability = (reg_val = SPI_read(3,0,2)&0x5e0) >>5;
--				if ((ability & 0x0C)) /* 100M full duplex */
--				{
--					SPI_write(1,i,0x00,0x30050472);
--					SPI_write(1,i,0x00,0x10050442);
--					printk("Port%d:100M\n",i);
--					switch_pre_link[i]=LINK_UP;
--				switch_pre_speed[i]=GMAC_SPEED_100;
--				}
--				else if((ability & 0x03)) /* 10M full duplex */
--				{
--					SPI_write(1,i,0x00,0x30050473);
--					SPI_write(1,i,0x00,0x10050443);
--					printk("Port%d:10M\n",i);
--					switch_pre_link[i]=LINK_UP;
--					switch_pre_speed[i]=GMAC_SPEED_10;
--				}
--				else{
--					SPI_write(1,i,0x00,BIT(16));			// disable RX
--					SPI_write(5,0,0x0E,BIT(i));			// dicard packet
--					while((SPI_read(5,0,0x0C)&BIT(i))==0)		// wait to be empty
--						msleep(1);
--
--					SPI_write(1,i,0x00,0x20000030);			// PORT_RST
--					switch_pre_link[i]=LINK_DOWN;
--					switch_pre_speed[i]=GMAC_SPEED_10;
--					rcv_mask &= ~BIT(i);
--					SPI_write(2,0,0x10,rcv_mask);			// Disable Receive
--				}
--			}
--		}
--#endif
--		gmac_get_switch_status(dev);
--		gmac_write_reg(tp->base_addr, GMAC_STATUS, 0x7d, 0x0000007f);
--//		SPI_write(2,0,0x10,rcv_mask);			// Enable Receive
--		return ;
--	}
--#endif
--
--	reg_val = gmac_get_phy_vendor(tp->phy_addr);
--	printk("GMAC-%d Addr %d Vendor ID: 0x%08x\n", tp->port_id, tp->phy_addr, reg_val);
--
--	switch (tp->phy_mode)
-+	switch (tp->phy_mode)
- 	{
- 		case GMAC_PHY_GMII:
- 		mii_write(tp->phy_addr,0x04,0x05e1); /* advertisement 100M full duplex, pause capable on */
-@@ -3552,6 +2982,7 @@
- 		status.bits.link = LINK_DOWN;
- 		//		clear_bit(__LINK_STATE_START, &dev->state);
- 		printk("Link Down (0x%04x) ", reg_val);
-+#ifdef VITESSE_G5SWITCH
- 		if(Giga_switch == 1)
- 		{
- 				wan_port_id = 1;
-@@ -3565,6 +2996,7 @@
- 				storlink_ctl.link[ tp->port_id] = 0;
- #endif
- 		}
-+#endif
- 	}
- 	else
- 	{
-@@ -3572,6 +3004,7 @@
- 		status.bits.link = LINK_UP;
- 		//		set_bit(__LINK_STATE_START, &dev->state);
- 		printk("Link Up (0x%04x) ",reg_val);
-+#ifdef VITESSE_G5SWITCH
- 		if(Giga_switch == 1)
- 		{
- 				wan_port_id = 1;
-@@ -3585,6 +3018,7 @@
- 				storlink_ctl.link[ tp->port_id] = 1;
- #endif
- 		}
-+#endif
- 	}
- 	//    value = mii_read(PHY_ADDR,0x05);
- 
-@@ -3863,6 +3297,7 @@
- 			}
- 		}
- 		status.bits.link = LINK_UP; /* link up */
-+#ifdef VITESSE_G5SWITCH
- 		if(Giga_switch==1)
- 		{
- 				wan_port_id = 1;
-@@ -3874,6 +3309,7 @@
- 				storlink_ctl.link[ tp->port_id] = 1;
- #endif
- 		}
-+#endif
- 		if ((ability & 0x20)==0x20)
- 		{
- 			if (tp->flow_control_enable == 0)
-@@ -3914,6 +3350,7 @@
- 	else
- 	{
- 		status.bits.link = LINK_DOWN; /* link down */
-+#ifdef VITESSE_G5SWITCH
- 		if(Giga_switch == 1)
- 		{
- 				wan_port_id = 1;
-@@ -3925,6 +3362,7 @@
- 				storlink_ctl.link[ tp->port_id] = 0;
- #endif
- 		}
-+#endif
- 		if (tp->pre_phy_status == LINK_UP)
- 		{
- 			printk("GMAC-%d LINK_Down......\n",tp->port_id);
-@@ -4298,86 +3736,102 @@
- }
- 
- #ifdef CONFIG_SL_NAPI
-+
-+static int gmax_rx(struct net_device *dev, int *budget)
-+{
-+	return 0;
-+}
-+
-+static int gmac_tx(struct net_device *dev, int *budget)
-+{
-+	return 0;
-+}
-+
- /*----------------------------------------------------------------------
- * gmac_rx_poll
- *----------------------------------------------------------------------*/
- static int gmac_rx_poll(struct net_device *dev, int *budget)
- {
--	TOE_INFO_T			*toe;
--    GMAC_RXDESC_T   	*curr_desc;
--	struct sk_buff 		*skb;
--    DMA_RWPTR_T			rwptr;
--    unsigned int data32;
--	unsigned int 		pkt_size;
--	unsigned int        desc_count;
--	unsigned int        good_frame, chksum_status, rx_status;
--	int                 rx_pkts_num = 0;
--	int                 quota = min(dev->quota, *budget);
--	GMAC_INFO_T			*tp = (GMAC_INFO_T *)dev->priv;
--	unsigned int		status4;
--	volatile DMA_RWPTR_T	fq_rwptr;
--	// int					max_cnt = TOE_SW_FREEQ_DESC_NUM;//TOE_SW_FREEQ_DESC_NUM = 64
--	//unsigned long		rx_old_bytes;
-+	TOE_INFO_T	*toe;
-+	GMAC_RXDESC_T	*curr_desc;
-+	struct sk_buff	*skb;
-+	DMA_RWPTR_T	rwptr;
-+	unsigned int	data32;
-+	unsigned int	pkt_size;
-+	unsigned int	desc_count;
-+	unsigned int	good_frame, chksum_status, rx_status;
-+	int		rx_pkts_num = 0;
-+	int		quota = min(dev->quota, *budget);
-+	GMAC_INFO_T	*tp = (GMAC_INFO_T *)dev->priv;
-+	unsigned int	status1;
-+	unsigned int	status4;
- 	struct net_device_stats *isPtr = (struct net_device_stats *)&tp->ifStatics;
--	//unsigned long long	rx_time;
--
- 
- 	BUG_ON(rx_poll_enabled == 0);
--#if 1
--	if (do_again)
--	{
--			toe_gmac_fill_free_q();
--			status4 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_STATUS_4_REG);
--			fq_rwptr.bits32 = readl(TOE_GLOBAL_BASE + GLOBAL_SWFQ_RWPTR_REG);
--			//printk("\n%s:: do_again toe_gmac_fill_free_q =======>status4=0x%x =====fq_rwptr =0x%8x======>JKJKJKJKJKJKJKJKJ \n", __func__,status4,fq_rwptr.bits32);
--			if (fq_rwptr.bits.wptr != fq_rwptr.bits.rptr)
--			{
--						//status4 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_STATUS_4_REG);
--						do_again =0;
--						//netif_rx_complete(dev);
--						gmac_write_reg(TOE_GLOBAL_BASE, GLOBAL_INTERRUPT_STATUS_4_REG, status4,	0x1);
--						fq_rwptr.bits32 = readl(TOE_GLOBAL_BASE + GLOBAL_SWFQ_RWPTR_REG);
--						rwptr.bits32 = readl(&tp->default_qhdr->word1);
--			}
--			else
--				return 1;
--	}
--#endif
--	rwptr.bits32 = readl(&tp->default_qhdr->word1);
--#if 0
--	if (rwptr.bits.rptr != tp->rx_rwptr.bits.rptr)
--	{
--		mac_stop_txdma((struct net_device *)tp->dev);
--		printk("Default Queue HW RD ptr (0x%x) != SW RD Ptr (0x%x)\n",
--				rwptr.bits32, tp->rx_rwptr.bits.rptr);
--		while(1);
--	}
--#endif
-+
- 	toe = (TOE_INFO_T *)&toe_private_data;
- 
--	fq_rwptr.bits32 = readl(TOE_GLOBAL_BASE + GLOBAL_SWFQ_RWPTR_REG);
--	//printk("%s:---Before-------------->Default Queue HW RW ptr (0x%8x),   fq_rwptr =0x%8x \n",__func__,rwptr.bits32,fq_rwptr.bits32 );
--	//printk("%s:---Before while   rx_pkts_num=%d------rx_finished_idx=0x%x------->Default_Q [rwptr.bits.rptr(SW)=0x%x,   rwptr.bits.wptr(HW) = 0x%x ]---->Free_Q(SW_HW) = 0x%8x \n",__func__,rx_pkts_num,rx_finished_idx,rwptr.bits.rptr,rwptr.bits.wptr,fq_rwptr.bits32 );
--//	while ((--max_cnt) && (rwptr.bits.rptr != rwptr.bits.wptr) && (rx_pkts_num < quota))
-+rx_poll_retry:
-+	status1 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_STATUS_1_REG);
-+	if (status1 & 1) {
-+		writel(1, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_STATUS_1_REG);
-+	}
- 
-+	rwptr.bits32 = readl(&tp->default_qhdr->word1);
- 	while ((rwptr.bits.rptr != rwptr.bits.wptr) && (rx_pkts_num < quota))
- 	{
--
--    	curr_desc = (GMAC_RXDESC_T *)tp->default_desc_base + rwptr.bits.rptr;
-+		curr_desc = (GMAC_RXDESC_T *)tp->default_desc_base + rwptr.bits.rptr;
- 		tp->default_q_cnt++;
--    	tp->rx_curr_desc = (unsigned int)curr_desc;
--    	rx_status = curr_desc->word0.bits.status;
--    	chksum_status = curr_desc->word0.bits.chksum_status;
--    	tp->rx_status_cnt[rx_status]++;
--    	tp->rx_chksum_cnt[chksum_status]++;
--        pkt_size = curr_desc->word1.bits.byte_count;  /*total byte count in a frame*/
-+		tp->rx_curr_desc = (unsigned int)curr_desc;
-+		rx_status = curr_desc->word0.bits.status;
-+		chksum_status = curr_desc->word0.bits.chksum_status;
-+		tp->rx_status_cnt[rx_status]++;
-+		tp->rx_chksum_cnt[chksum_status]++;
-+		pkt_size = curr_desc->word1.bits.byte_count;  /*total byte count in a frame*/
- 		desc_count = curr_desc->word0.bits.desc_count; /* get descriptor count per frame */
- 		good_frame=1;
-+
-+		if (0) {
-+
-+				int free, busy;
-+				uint32_t rwptr1;
-+				uint32_t rwptr2;
-+
-+				rwptr1 = readl(TOE_GLOBAL_BASE + GLOBAL_SWFQ_RWPTR_REG);
-+				free = (GET_WPTR(rwptr1) - GET_RPTR(rwptr1)) & 0xFF;
-+
-+				rwptr2 = readl(&tp->default_qhdr->word1);
-+				busy = (GET_RPTR(rwptr2) - GET_WPTR(rwptr2)) & 0xFF;
-+
-+				if (GET_WPTR(rwptr1) == GET_RPTR(rwptr1)) {
-+					printk("frame  status: %d\n"
-+					       "SWFQ: wptr: %hu, rptr: %hu, free: %d\n"
-+					       "GMAC: wptr: %hu, rptr: %hu, free: %d\n",
-+					       rx_status,
-+					       GET_WPTR(rwptr1), GET_RPTR(rwptr1), free,
-+					       GET_WPTR(rwptr2), GET_RPTR(rwptr2), busy);
-+				}
-+		}
-+
-+		{
-+			GMAC_RXDESC_T	*fq_desc;
-+			void *data;
-+			struct sk_buff *skb;
-+			unsigned short idx;
-+
-+			skb = (struct sk_buff *)(REG32(__va(curr_desc->word2.buf_adr) - SKB_RESERVE_BYTES));
-+			idx = (unsigned short)(REG32(__va(curr_desc->word2.buf_adr) - SKB_RESERVE_BYTES + 4));
-+
-+			BUG_ON(idx > TOE_SW_FREEQ_DESC_NUM);
-+			BUG_ON(skb == NULL);
-+			fq_desc = (GMAC_RXDESC_T*)toe->swfq_desc_base + idx;
-+			fq_desc->word2.buf_adr = 0;
-+		}
-+
- 		if ((curr_desc->word0.bits32 & (GMAC_RXDESC_0_T_derr | GMAC_RXDESC_0_T_perr))
--			|| (pkt_size < 60)
-+		    || (pkt_size < 60)
- 		    || (chksum_status & 0x4)
- 		    || rx_status )
--//			|| rx_status || (rwptr.bits.rptr > rwptr.bits.wptr ))
- 		{
- 			good_frame = 0;
- 			if (curr_desc->word0.bits32 & GMAC_RXDESC_0_T_derr)
-@@ -4388,7 +3842,6 @@
- 			{
- 				if (rx_status == 4 || rx_status == 7)
- 					isPtr->rx_crc_errors++;
--//				printk("%s::Status=%d (GMAC-%d)!!!\n", __func__, rx_status, tp->port_id);
- 			}
- #ifdef SL351x_GMAC_WORKAROUND
- 			else if (pkt_size < 60)
-@@ -4407,17 +3860,32 @@
- 				}
- 			}
- #endif
--//			if (chksum_status)
--//				printk("%s::Checksum Status=%d (GMAC-%d)!!!\n", __func__, chksum_status, tp->port_id);
- 			skb = (struct sk_buff *)(REG32(__va(curr_desc->word2.buf_adr) - SKB_RESERVE_BYTES));
--			dev_kfree_skb_irq(skb);
-+			dev_kfree_skb(skb);
-+
-+			if (0) {
-+				int free, busy;
-+				uint32_t rwptr1;
-+				uint32_t rwptr2;
-+
-+				rwptr1 = readl(TOE_GLOBAL_BASE + GLOBAL_SWFQ_RWPTR_REG);
-+				free = (GET_WPTR(rwptr1) - GET_RPTR(rwptr1)) & 0xFF;
-+
-+				rwptr2 = readl(&tp->default_qhdr->word1);
-+				busy = (GET_RPTR(rwptr2) - GET_WPTR(rwptr2)) & 0xFF;
-+
-+				printk("frame  status: %d\n"
-+				       "SWFQ: wptr: %hu, rptr: %hu, free: %d\n"
-+				       "GMAC: wptr: %hu, rptr: %hu, free: %d\n",
-+				       rx_status,
-+				       GET_WPTR(rwptr1), GET_RPTR(rwptr1), free,
-+				       GET_WPTR(rwptr2), GET_RPTR(rwptr2), busy);
-+			}
- 		}
- 		if (good_frame)
- 		{
- 			if (curr_desc->word0.bits.drop)
- 				printk("%s::Drop (GMAC-%d)!!!\n", __func__, tp->port_id);
--//			if (chksum_status)
--//				printk("%s::Checksum Status=%d (GMAC-%d)!!!\n", __func__, chksum_status, tp->port_id);
- 
- #ifdef SL351x_GMAC_WORKAROUND
- 			if (tp->short_frames_cnt >= GMAC_SHORT_FRAME_THRESHOLD)
-@@ -4432,225 +3900,118 @@
- 			}
- 			tp->short_frames_cnt = 0;
- #endif
--	    	/* get frame information from the first descriptor of the frame */
-+			/* get frame information from the first descriptor of the frame */
- 			isPtr->rx_packets++;
--			//consistent_sync((void *)__va(curr_desc->word2.buf_adr), pkt_size, PCI_DMA_FROMDEVICE);
-+			consistent_sync((void *)__va(curr_desc->word2.buf_adr), pkt_size, PCI_DMA_FROMDEVICE);
- 			skb = (struct sk_buff *)(REG32(__va(curr_desc->word2.buf_adr) - SKB_RESERVE_BYTES));
- 			tp->curr_rx_skb = skb;
--	//		curr_desc->word2.buf_adr = 0;
- 
--		    //skb_reserve (skb, SKB_RESERVE_BYTES);
- 			skb_reserve (skb, RX_INSERT_BYTES);	/* 2 byte align the IP fields. */
--			//if ((skb->tail+pkt_size) > skb->end )
--			//printk("%s::------------->Here skb->len=%d,pkt_size= %d,skb->head=0x%x,skb->tail= 0x%x, skb->end= 0x%x\n", __func__, skb->len, pkt_size,skb->head,skb->tail,skb->end);
- 			skb_put(skb, pkt_size);
- 
--
- 			skb->dev = dev;
- 			if (chksum_status == RX_CHKSUM_IP_UDP_TCP_OK)
- 			{
- 				skb->ip_summed = CHECKSUM_UNNECESSARY;
--#ifdef CONFIG_SL351x_NAT
--				if (nat_cfg.enabled && curr_desc->word3.bits.l3_offset && curr_desc->word3.bits.l4_offset)
--				{
--					struct iphdr	*ip_hdr;
--					ip_hdr = (struct iphdr *)&(skb->data[curr_desc->word3.bits.l3_offset]);
--					sl351x_nat_input(skb,
--									tp->port_id,
--									(void *)curr_desc->word3.bits.l3_offset,
--								  	(void *)curr_desc->word3.bits.l4_offset);
--				}
--#endif
- 				skb->protocol = eth_type_trans(skb,dev); /* set skb protocol */
--#if 0
--#ifdef CONFIG_SL351x_RXTOE
--				if (storlink_ctl.rx_max_pktsize) {
--					struct iphdr	*ip_hdr;
--					struct tcphdr	*tcp_hdr;
--					int ip_hdrlen;
--
-- 					ip_hdr = (struct iphdr*)&(skb->data[0]);
--					if ((skb->protocol == __constant_htons(ETH_P_IP)) &&
--					   ((ip_hdr->protocol & 0x00ff) == IPPROTO_TCP)) {
--						ip_hdrlen = ip_hdr->ihl << 2;
--						tcp_hdr = (struct tcphdr*)&(skb->data[ip_hdrlen]);
--						if (tcp_hdr->syn) {
--							struct toe_conn* connection = init_toeq(ip_hdr->version,
--									ip_hdr, tcp_hdr, toe, &(skb->data[0]) - 14);
--							TCP_SKB_CB(skb)->connection = connection;
--							//	hash_dump_entry(TCP_SKB_CB(skb)->connection->hash_entry_index);
--							//		printk("%s::skb data %x, conn %x, mode %x\n",
--							//			__func__, skb->data, connection, connection->mode);
--						}
--					}
--				}
--#endif
--#endif
- 			}
- 			else if (chksum_status == RX_CHKSUM_IP_OK_ONLY)
- 			{
- 				skb->ip_summed = CHECKSUM_UNNECESSARY;
--#ifdef CONFIG_SL351x_NAT
--				if (nat_cfg.enabled && curr_desc->word3.bits.l3_offset && curr_desc->word3.bits.l4_offset)
--				{
--					struct iphdr	*ip_hdr;
--					ip_hdr = (struct iphdr *)&(skb->data[curr_desc->word3.bits.l3_offset]);
--					if (ip_hdr->protocol == IPPROTO_UDP)
--					{
--						sl351x_nat_input(skb,
--										tp->port_id,
--										(void *)curr_desc->word3.bits.l3_offset,
--								  		(void *)curr_desc->word3.bits.l4_offset);
--					}
--					else if (ip_hdr->protocol == IPPROTO_GRE)
--					{
--						sl351x_nat_input(skb,
--									tp->port_id,
--									(void *)curr_desc->word3.bits.l3_offset,
--								  	(void *)curr_desc->word3.bits.l4_offset);
--					}
--				}
--#endif
- 				skb->protocol = eth_type_trans(skb,dev); /* set skb protocol */
- 			}
- 			else
- 			{
- 				skb->protocol = eth_type_trans(skb,dev); /* set skb protocol */
- 			}
--			//netif_rx(skb);  /* socket rx */
-+
- 			netif_receive_skb(skb); //For NAPI
- 			dev->last_rx = jiffies;
- 
- 			isPtr->rx_bytes += pkt_size;
--			//printk("------------------->isPtr->rx_bytes = %d\n",isPtr->rx_bytes);
--
-+		}
- 
--        }
- 		// advance one for Rx default Q 0/1
- 		rwptr.bits.rptr = RWPTR_ADVANCE_ONE(rwptr.bits.rptr, tp->default_desc_num);
- 		SET_RPTR(&tp->default_qhdr->word1, rwptr.bits.rptr);
--     	tp->rx_rwptr.bits32 = rwptr.bits32;
-+		tp->rx_rwptr.bits32 = rwptr.bits32;
- 		rx_pkts_num++;
--		//rwptr.bits32 = readl(&tp->default_qhdr->word1);//try read default_qhdr again
--		//fq_rwptr.bits32 = readl(TOE_GLOBAL_BASE + GLOBAL_SWFQ_RWPTR_REG);
--		//printk("%s:---Loop  -------->rx_pkts_num=%d------------>Default Queue HW RW ptr = (0x%8x),   fq_rwptr =0x%8x \n",__func__,rx_pkts_num,rwptr.bits32,fq_rwptr.bits32 );
--#if 0
--		if ((status4 & 0x1) == 0)
--		{
--			//if (!((dev->last_rx <= (rx_time + 2)) &&  (isPtr->rx_bytes > (rx_old_bytes + 1000000 ))))
--			if (tp->total_q_cnt_napi < 1024)
--			{
--				tp->total_q_cnt_napi++;
--				toe_gmac_fill_free_q();  //for iperf test disable
--			}
--			//else
--				//printk("%s:---isPtr->rx_bytes =%u , rx_old_bytes =%u\n",__func__,isPtr->rx_bytes,rx_old_bytes );
-+		// rwptr.bits32 = readl(&tp->default_qhdr->word1);
- 
-+		status4 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_STATUS_4_REG);
-+		if (status4 & 1) {
-+			writel(status4 & SWFQ_EMPTY_INT_BIT, TOE_GLOBAL_BASE+GLOBAL_INTERRUPT_STATUS_4_REG);
- 		}
-+
-+		toe_gmac_fill_free_q(5);
-+	}
-+
-+#if 0
-+	/* avoid races with hard_start_xmit() */
-+
-+	spin_lock(&gmac_fq_lock);
-+	toe_gmac_tx_complete(&toe_private_data.gmac[0], 0, dev, 1);
-+	spin_unlock(&gmac_fq_lock);
- #endif
--		//rwptr.bits.rptr = RWPTR_ADVANCE_ONE(rwptr.bits.rptr, tp->default_desc_num);
--		//printk("%s:---Loop  -------->rx_pkts_num=%d----rwptr.bits.rptr=0x%x-------->Default Queue HW RW ptr = (0x%8x),   fq_rwptr =0x%8x \n",__func__,rx_pkts_num,rwptr.bits.rptr,rwptr.bits32,fq_rwptr.bits32 );
--		//printk("%s:---Loop  rx_pkts_num=%d------rwptr.bits.rptr=0x%x------->Default_Q [rwptr.bits.rptr(SW)=0x%x,   rwptr.bits.wptr(HW) = 0x%x ]---->Free_Q(SW_HW) = 0x%8x \n",__func__,rx_pkts_num,rwptr.bits.rptr,rwptr.bits.rptr,rwptr.bits.wptr,fq_rwptr.bits32 );
-+
-+	status4 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_STATUS_4_REG);
-+	if (status4 & 1)
-+	{
-+		writel(status4 & SWFQ_EMPTY_INT_BIT, TOE_GLOBAL_BASE+GLOBAL_INTERRUPT_STATUS_4_REG);
-+		status4 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_STATUS_4_REG);
-+		toe_gmac_fill_free_q(rx_pkts_num);
- 	}
--	// advance one for Rx default Q 0/1
- 
--		//rwptr.bits.rptr = RWPTR_ADVANCE_ONE(rwptr.bits.rptr, tp->default_desc_num);
--		//SET_RPTR(&tp->default_qhdr->word1, rwptr.bits.rptr);
--     	//tp->rx_rwptr.bits32 = rwptr.bits32;
--     	//rwptr.bits.rptr = rwptr.bits.rptr;
-+	rwptr.bits32 = readl(&tp->default_qhdr->word1);
-+	if (rwptr.bits.rptr != rwptr.bits.wptr &&
-+	    quota > rx_pkts_num)
-+		goto rx_poll_retry;
- 
- 	dev->quota -= rx_pkts_num;
- 	*budget -= rx_pkts_num;
- 
--	status4 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_STATUS_4_REG);//try read SWFQ empty again
--	//fq_rwptr.bits32 = readl(TOE_GLOBAL_BASE + GLOBAL_SWFQ_RWPTR_REG);
--	rwptr.bits32 = readl(&tp->default_qhdr->word1); //try read default_qhdr again
--	//printk("%s:---After    rx_pkts_num=%d------rwptr.bits.rptr=0x%x------->Default_Q [rwptr.bits.rptr(SW)=0x%x,   rwptr.bits.wptr(HW) = 0x%x ]---->Free_Q(SW_HW) = 0x%8x \n",__func__,rx_pkts_num,rwptr.bits.rptr,rwptr.bits.rptr,rwptr.bits.wptr,fq_rwptr.bits32 );
--//	if (rwptr.bits.rptr > rwptr.bits.wptr )
--//			{
--				//toe_gmac_disable_rx(dev);
--				//wait_event_interruptible_timeout(freeq_wait,
--					//(rx_pkts_num == 100), CMTP_INTEROP_TIMEOUT);
--				//printk("\n%s:: return 22222=======> rx_pkts_num =%d,   rwptr.bits.rptr=%d,   rwptr.bits.wptr = %d ====---------=======>JKJKJKJKJK\n",
--					//__func__,rx_pkts_num,rwptr.bits.rptr,rwptr.bits.wptr);
--//				return 1;
--//			}
--
--	if (rwptr.bits.rptr == rwptr.bits.wptr)
-+	/* Receive queue is empty now */
-+	if (quota >= rx_pkts_num)
- 	{
--		// unsigned int data32;
--			//printk("%s:---[rwptr.bits.rptr == rwptr.bits.wptr]   rx_pkts_num=%d------rwptr.bits.rptr=0x%x------->Default_Q [rwptr.bits.rptr(SW)=0x%x,   rwptr.bits.wptr(HW) = 0x%x ]---->Free_Q(SW_HW) = 0x%8x \n",__func__,rx_pkts_num,rwptr.bits.rptr,rwptr.bits.rptr,rwptr.bits.wptr,fq_rwptr.bits32 );
--
--	    /* Receive descriptor is empty now */
--#if 1
--     if (status4 & 0x1)
--   			{
--   				do_again =1;
--   				//writel(0x40400000, TOE_GLOBAL_BASE+GLOBAL_INTERRUPT_ENABLE_4_REG); //disable SWFQ empty interrupt
--   				//toe_gmac_disable_interrupt(tp->irq);
--   				tp->sw_fq_empty_cnt++;
--   				//toe_gmac_disable_rx(dev);
--   				writel(0x07960202, TOE_GMAC0_BASE+GMAC_CONFIG0);
--				writel(0x07960202, TOE_GMAC1_BASE+GMAC_CONFIG0);
--   				//printk("\n%s ::  freeq int-----tp->sw_fq_empty_cnt  =%d---------====================----------------->\n",__func__,tp->sw_fq_empty_cnt);
--   				//while ((fq_rwptr.bits.wptr >= (fq_rwptr.bits.rptr+256)) || (fq_rwptr.bits.wptr <= (fq_rwptr.bits.rptr+256)))
--   				//{
--   					//gmac_write_reg(TOE_GLOBAL_BASE, GLOBAL_INTERRUPT_STATUS_4_REG, status4,
--					//0x1);
--				//printk("\n%s::fq_rwptr.wrptr = %x =======> ===========>here \n", __func__,fq_rwptr.bits32);
--				//if ((status4 & 0x1) == 0)
--					//break;
--				 return 1;
--				//}
-+		unsigned long flags;
- 
-+		netif_rx_complete(dev);
-+		rx_poll_enabled = 0;
-+#if 0
-+		status1 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_STATUS_1_REG);
-+		if (status1 & 1) {
-+			if (netif_rx_reschedule(dev, rx_pkts_num)) {
-+				rx_poll_enabled = 1;
-+				return 1;
- 			}
-+		}
- #endif
--        //toe_gmac_fill_free_q();
--        netif_rx_complete(dev);
--
--		rx_poll_enabled = 0;
- 
--		data32 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_1_REG);
--		if (tp->port_id == 0)
--				data32 |= DEFAULT_Q0_INT_BIT;
--		else
--				data32 |= DEFAULT_Q1_INT_BIT;
--		writel(data32, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_1_REG);
-+		spin_lock_irqsave(&gmac_fq_lock, flags);
- 
- 		data32 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_4_REG);
- 		if (tp->port_id == 0)
--				data32 |= DEFAULT_Q0_INT_BIT;
-+			data32 |= DEFAULT_Q0_INT_BIT;
- 		else
--				data32 |= DEFAULT_Q1_INT_BIT;
-+			data32 |= DEFAULT_Q1_INT_BIT;
- 		writel(data32, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_4_REG);
- 
--		data32 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_4_REG);
-+		data32 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_1_REG);
- 		if (tp->port_id == 0)
--				data32 |= DEFAULT_Q0_INT_BIT;
-+			data32 |= DEFAULT_Q0_INT_BIT;
- 		else
--				data32 |= DEFAULT_Q1_INT_BIT;
--		writel(data32, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_4_REG);
-+			data32 |= DEFAULT_Q1_INT_BIT;
-+		writel(data32, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_1_REG);
- 
--        // enable GMAC-0 rx interrupt
--        // class-Q & TOE-Q are implemented in future
--        //data32 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_1_REG);
--        //if (tp->port_id == 0)
--        	//data32 |= DEFAULT_Q0_INT_BIT;
--        //else
--        	//data32 |= DEFAULT_Q1_INT_BIT;
--        //writel(data32, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_1_REG);
--		writel(0x3, TOE_GLOBAL_BASE+GLOBAL_INTERRUPT_ENABLE_1_REG);
--		//printk("\n%s::netif_rx_complete-->  rx_pkts_num =%d,   rwptr.bits.rptr=0x%x,   rwptr.bits.wptr = 0x%x ====---------=======>JKJKJKJKJK\n",
--		//__func__,rx_pkts_num,rwptr.bits.rptr,rwptr.bits.wptr);
--        writel(0x07960200, TOE_GMAC0_BASE+GMAC_CONFIG0);
--		writel(0x07960200, TOE_GMAC1_BASE+GMAC_CONFIG0);
--        return 0;
--    }
--    else
--    {
--        //printk("\n%s:: return 1 -->status4= 0x%x,rx_pkts_num =%d,   rwptr.bits.rptr=0x%x,   rwptr.bits.wptr = 0x%x  ======> \n", __func__,status4,rx_pkts_num,rwptr.bits.rptr,rwptr.bits.wptr);
--        return 1;
--    }
-+		spin_unlock_irqrestore(&gmac_fq_lock, flags);
-+
-+		return 0;
-+	}
-+	else
-+	{
-+		/* not done, will call ->poll() later. */
-+		return 1;
-+	}
- }
- #endif
- 
-@@ -5114,6 +4475,7 @@
- 			{
- 				sl351x_nat_workaround_cnt++;
- 				sl351x_nat_workaround_handler();
-+				printk("%():%d - workaround\n", __func__, __LINE__);
- 			}
- #endif
- #endif
-@@ -5124,6 +4486,7 @@
- 	}
- 
- do_workaround:
-+	printk("doing workaround ?!\n");
- 
- 	gmac_initialized = 0;
- 	if (hanged_state)
-@@ -5290,6 +4653,7 @@
- 	GMAC_SWTXQ_T	*swtxq;
- 	DMA_RWPTR_T		rwptr;
- 
-+	printk("**** %s():%d\n", __func__, __LINE__);
- 	toe = (TOE_INFO_T *)&toe_private_data;
- 	tp = (GMAC_INFO_T *)&toe->gmac[0];
- 	for (i=0; igmac[0];
- 	for (i=0; iclassq[0];
- 	for (i=0; i
- #include 
- 
-+//****** Storlink SoC ******
- #define AMD_BOOTLOC_BUG
--#define FORCE_WORD_WRITE 0
--
--#define MAX_WORD_RETRIES 3
-+//#define FORCE_WORD_WRITE 0
-+#define FORCE_WORD_WRITE 1
-+#define FORCE_FAST_PROG 0
-+
-+//#define MAX_WORD_RETRIES 3
-+#define MAX_WORD_RETRIES 3 // CONFIG_MTD_CFI_AMDSTD_RETRY
-+//**************************
- 
- #define MANUFACTURER_AMD	0x0001
- #define MANUFACTURER_ATMEL	0x001F
-@@ -322,6 +327,13 @@
- #endif
- 
- 		bootloc = extp->TopBottom;
-+//****** Storlink SoC ******
-+		if(bootloc == 5)
-+		{
-+			bootloc = 3;
-+			extp->TopBottom = 3;
-+		}
-+//**************************
- 		if ((bootloc != 2) && (bootloc != 3)) {
- 			printk(KERN_WARNING "%s: CFI does not contain boot "
- 			       "bank location. Assuming top.\n", map->name);
-@@ -340,6 +352,9 @@
- 				cfi->cfiq->EraseRegionInfo[j] = swap;
- 			}
- 		}
-+#ifdef CONFIG_MTD_MAP_BANK_WIDTH_1
-+		cfi->device_type = CFI_DEVICETYPE_X8;
-+#endif
- 		/* Set the default CFI lock/unlock addresses */
- 		cfi->addr_unlock1 = 0x555;
- 		cfi->addr_unlock2 = 0x2aa;
-@@ -461,6 +476,7 @@
- 	map_word d, t;
- 
- 	d = map_read(map, addr);
-+	udelay(20);	//Storlink SoC
- 	t = map_read(map, addr);
- 
- 	return map_word_equal(map, d, t);
-@@ -626,7 +642,9 @@
- 	default:
- 		printk(KERN_ERR "MTD: put_chip() called with oldstate %d!!\n", chip->oldstate);
- 	}
-+//****** Storlink SoC ******
- 	wake_up(&chip->wq);
-+//**************************
- }
- 
- #ifdef CONFIG_MTD_XIP
-@@ -940,7 +958,9 @@
- 	cfi_send_gen_cmd(0x90, cfi->addr_unlock1, chip->start, map, cfi, cfi->device_type, NULL);
- 	cfi_send_gen_cmd(0x00, cfi->addr_unlock1, chip->start, map, cfi, cfi->device_type, NULL);
- 
-+//****** Storlink SoC ******
- 	wake_up(&chip->wq);
-+//**************************
- 	spin_unlock(chip->mutex);
- 
- 	return 0;
-@@ -1005,7 +1025,10 @@
- 	 */
- 	unsigned long uWriteTimeout = ( HZ / 1000 ) + 1;
- 	int ret = 0;
--	map_word oldd;
-+//****** Storlink SoC ******
-+//	map_word oldd;
-+	map_word oldd, tmp;
-+//**************************
- 	int retry_cnt = 0;
- 
- 	adr += chip->start;
-@@ -1037,9 +1060,15 @@
- 	ENABLE_VPP(map);
- 	xip_disable(map, chip, adr);
-  retry:
-+//****** Storlink SoC ******
-+#if FORCE_FAST_PROG  /* Unlock bypass */
-+	cfi_send_gen_cmd(0xA0, cfi->addr_unlock1, chip->start, map, cfi, cfi->device_type, NULL);
-+#else
- 	cfi_send_gen_cmd(0xAA, cfi->addr_unlock1, chip->start, map, cfi, cfi->device_type, NULL);
- 	cfi_send_gen_cmd(0x55, cfi->addr_unlock2, chip->start, map, cfi, cfi->device_type, NULL);
- 	cfi_send_gen_cmd(0xA0, cfi->addr_unlock1, chip->start, map, cfi, cfi->device_type, NULL);
-+#endif
-+//**************************
- 	map_write(map, datum, adr);
- 	chip->state = FL_WRITING;
- 
-@@ -1072,7 +1101,13 @@
- 		}
- 
- 		if (chip_ready(map, adr))
--			break;
-+		{
-+			tmp = map_read(map, adr);
-+			if(map_word_equal(map, tmp, datum))
-+//				goto op_done;
-+                break;
-+
-+		}
- 
- 		/* Latency issues. Drop the lock, wait a while and retry */
- 		UDELAY(map, chip, adr, 1);
-@@ -1084,8 +1119,17 @@
- 		/* FIXME - should have reset delay before continuing */
- 
- 		if (++retry_cnt <= MAX_WORD_RETRIES)
-+		{
-+//****** Storlink SoC ******
-+#if FORCE_FAST_PROG
-+			cfi_send_gen_cmd(0xAA, cfi->addr_unlock1, chip->start, map, cfi, cfi->device_type, NULL);
-+			cfi_send_gen_cmd(0x55, cfi->addr_unlock2, chip->start, map, cfi, cfi->device_type, NULL);
-+			cfi_send_gen_cmd(0x20, cfi->addr_unlock1, chip->start, map, cfi, cfi->device_type, NULL);
-+		//udelay(1);
-+#endif
-+			udelay(1);
- 			goto retry;
--
-+		}
- 		ret = -EIO;
- 	}
- 	xip_enable(map, chip, adr);
-@@ -1171,7 +1215,14 @@
- 				return 0;
- 		}
- 	}
--
-+//****** Storlink SoC ******
-+	map_write( map, CMD(0xF0), chipstart );
-+#if FORCE_FAST_PROG
-+		cfi_send_gen_cmd(0xAA, cfi->addr_unlock1, chipstart, map, cfi, cfi->device_type, NULL);
-+		cfi_send_gen_cmd(0x55, cfi->addr_unlock2, chipstart, map, cfi, cfi->device_type, NULL);
-+		cfi_send_gen_cmd(0x20, cfi->addr_unlock1, chipstart, map, cfi, cfi->device_type, NULL);
-+#endif
-+//**************************
- 	/* We are now aligned, write as much as possible */
- 	while(len >= map_bankwidth(map)) {
- 		map_word datum;
-@@ -1181,7 +1232,15 @@
- 		ret = do_write_oneword(map, &cfi->chips[chipnum],
- 				       ofs, datum);
- 		if (ret)
-+		{
-+//****** Storlink SoC ******
-+#if FORCE_FAST_PROG
-+			/* Get out of unlock bypass mode */
-+			cfi_send_gen_cmd(0x90, 0, chipstart, map, cfi, cfi->device_type, NULL);
-+			cfi_send_gen_cmd(0x00, 0, chipstart, map, cfi, cfi->device_type, NULL);
-+#endif
- 			return ret;
-+		}
- 
- 		ofs += map_bankwidth(map);
- 		buf += map_bankwidth(map);
-@@ -1189,19 +1248,38 @@
- 		len -= map_bankwidth(map);
- 
- 		if (ofs >> cfi->chipshift) {
-+//****** Storlink SoC ******
-+#if FORCE_FAST_PROG
-+			/* Get out of unlock bypass mode */
-+			cfi_send_gen_cmd(0x90, 0, chipstart, map, cfi, cfi->device_type, NULL);
-+			cfi_send_gen_cmd(0x00, 0, chipstart, map, cfi, cfi->device_type, NULL);
-+#endif
- 			chipnum ++;
- 			ofs = 0;
- 			if (chipnum == cfi->numchips)
- 				return 0;
- 			chipstart = cfi->chips[chipnum].start;
-+#if FORCE_FAST_PROG
-+			/* Go into unlock bypass mode for next set of chips */
-+			cfi_send_gen_cmd(0xAA, cfi->addr_unlock1, chipstart, map, cfi, cfi->device_type, NULL);
-+			cfi_send_gen_cmd(0x55, cfi->addr_unlock2, chipstart, map, cfi, cfi->device_type, NULL);
-+			cfi_send_gen_cmd(0x20, cfi->addr_unlock1, chipstart, map, cfi, cfi->device_type, NULL);
-+#endif
- 		}
- 	}
- 
-+#if FORCE_FAST_PROG
-+	/* Get out of unlock bypass mode */
-+	cfi_send_gen_cmd(0x90, 0, chipstart, map, cfi, cfi->device_type, NULL);
-+	cfi_send_gen_cmd(0x00, 0, chipstart, map, cfi, cfi->device_type, NULL);
-+#endif
-+
- 	/* Write the trailing bytes if any */
- 	if (len & (map_bankwidth(map)-1)) {
- 		map_word tmp_buf;
- 
-  retry1:
-+
- 		spin_lock(cfi->chips[chipnum].mutex);
- 
- 		if (cfi->chips[chipnum].state != FL_READY) {
-@@ -1221,7 +1299,11 @@
- #endif
- 			goto retry1;
- 		}
--
-+#if FORCE_FAST_PROG
-+		cfi_send_gen_cmd(0xAA, cfi->addr_unlock1, chipstart, map, cfi, cfi->device_type, NULL);
-+		cfi_send_gen_cmd(0x55, cfi->addr_unlock2, chipstart, map, cfi, cfi->device_type, NULL);
-+		cfi_send_gen_cmd(0x20, cfi->addr_unlock1, chipstart, map, cfi, cfi->device_type, NULL);
-+#endif
- 		tmp_buf = map_read(map, ofs + chipstart);
- 
- 		spin_unlock(cfi->chips[chipnum].mutex);
-@@ -1231,11 +1313,23 @@
- 		ret = do_write_oneword(map, &cfi->chips[chipnum],
- 				ofs, tmp_buf);
- 		if (ret)
-+		{
-+#if FORCE_FAST_PROG
-+	/* Get out of unlock bypass mode */
-+	cfi_send_gen_cmd(0x90, 0, chipstart, map, cfi, cfi->device_type, NULL);
-+	cfi_send_gen_cmd(0x00, 0, chipstart, map, cfi, cfi->device_type, NULL);
-+#endif
- 			return ret;
--
-+		}
-+#if FORCE_FAST_PROG
-+	/* Get out of unlock bypass mode */
-+	cfi_send_gen_cmd(0x90, 0, chipstart, map, cfi, cfi->device_type, NULL);
-+	cfi_send_gen_cmd(0x00, 0, chipstart, map, cfi, cfi->device_type, NULL);
-+#endif
- 		(*retlen) += len;
- 	}
- 
-+	map_write( map, CMD(0xF0), chipstart );
- 	return 0;
- }
- 
-@@ -1275,6 +1369,7 @@
- 	ENABLE_VPP(map);
- 	xip_disable(map, chip, cmd_adr);
- 
-+	map_write( map, CMD(0xF0), chip->start );	//Storlink
- 	cfi_send_gen_cmd(0xAA, cfi->addr_unlock1, chip->start, map, cfi, cfi->device_type, NULL);
- 	cfi_send_gen_cmd(0x55, cfi->addr_unlock2, chip->start, map, cfi, cfi->device_type, NULL);
- 	//cfi_send_gen_cmd(0xA0, cfi->addr_unlock1, chip->start, map, cfi, cfi->device_type, NULL);
-@@ -1535,6 +1630,9 @@
- 	DECLARE_WAITQUEUE(wait, current);
- 	int ret = 0;
- 
-+#ifdef CONFIG_SL2312_SHARE_PIN
-+	mtd_lock();				// sl2312 share pin lock
-+#endif
- 	adr += chip->start;
- 
- 	spin_lock(chip->mutex);
-@@ -1613,6 +1711,9 @@
- 	chip->state = FL_READY;
- 	put_chip(map, chip, adr);
- 	spin_unlock(chip->mutex);
-+#ifdef CONFIG_SL2312_SHARE_PIN
-+	mtd_unlock();				// sl2312 share pin lock
-+#endif
- 	return ret;
- }
- 
---- /dev/null
-+++ b/drivers/mtd/chips/map_serial.c
-@@ -0,0 +1,188 @@
-+/*
-+ * Common code to handle map devices which are simple ROM
-+ * (C) 2000 Red Hat. GPL'd.
-+ * $Id: map_serial.c,v 1.3 2006/06/05 02:34:54 middle Exp $
-+ */
-+
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+
-+#include 
-+#include 
-+#include 
-+
-+#include 
-+#include 
-+#include 
-+#include  //add
-+#include 
-+#include 
-+
-+static int mapserial_erase(struct mtd_info *mtd, struct erase_info *instr);
-+static int mapserial_read (struct mtd_info *, loff_t, size_t, size_t *, u_char *);
-+static int mapserial_write (struct mtd_info *, loff_t, size_t, size_t *, const u_char *);
-+static void mapserial_nop (struct mtd_info *);
-+struct mtd_info *map_serial_probe(struct map_info *map);
-+
-+extern int m25p80_sector_erase(__u32 address, __u32 schip_en);
-+
-+static struct mtd_chip_driver mapserial_chipdrv = {
-+	probe: map_serial_probe,
-+	name: "map_serial",
-+	module: THIS_MODULE
-+};
-+
-+struct mtd_info *map_serial_probe(struct map_info *map)
-+{
-+	struct mtd_info *mtd;
-+
-+	mtd = kmalloc(sizeof(*mtd), GFP_KERNEL);
-+	if (!mtd)
-+		return NULL;
-+
-+	memset(mtd, 0, sizeof(*mtd));
-+
-+	map->fldrv = &mapserial_chipdrv;
-+	mtd->priv = map;
-+	mtd->name = map->name;
-+	mtd->type = MTD_OTHER;
-+	mtd->erase = mapserial_erase;
-+	mtd->size = map->size;
-+	mtd->read = mapserial_read;
-+	mtd->write = mapserial_write;
-+	mtd->sync = mapserial_nop;
-+	mtd->flags = (MTD_WRITEABLE|MTD_ERASEABLE);
-+//	mtd->erasesize = 512; // page size;
-+#ifdef CONFIG_MTD_SL2312_SERIAL_ST
-+	mtd->erasesize = M25P80_SECTOR_SIZE; // block size;
-+#else
-+	mtd->erasesize = 0x1000; // block size;
-+#endif
-+
-+	__module_get(THIS_MODULE);
-+	//MOD_INC_USE_COUNT;
-+	return mtd;
-+}
-+
-+#define	FLASH_ACCESS_OFFSET	        		0x00000010
-+#define	FLASH_ADDRESS_OFFSET            		0x00000014
-+#define	FLASH_WRITE_DATA_OFFSET         		0x00000018
-+#define	FLASH_READ_DATA_OFFSET          		0x00000018
-+
-+static __u32 readflash_ctrl_reg(__u32 ofs)
-+{
-+    __u32 *base;
-+
-+    base = (__u32 *)IO_ADDRESS((SL2312_FLASH_CTRL_BASE + ofs));
-+    return __raw_readl(base);
-+}
-+
-+static void writeflash_ctrl_reg(__u32 data, __u32 ofs)
-+{
-+    __u32 *base;
-+
-+    base = (__u32 *)IO_ADDRESS((SL2312_FLASH_CTRL_BASE + ofs));
-+    __raw_writel(data, base);
-+}
-+
-+static int mapserial_erase_block(struct map_info *map,unsigned int block)
-+{
-+
-+	__u32 address;
-+#ifdef CONFIG_MTD_SL2312_SERIAL_ST
-+
-+	if(!m25p80_sector_erase(block, 0))
-+		return (MTD_ERASE_DONE);
-+#else
-+      __u32 opcode;
-+      __u32 count=0;
-+//      __u8  status;
-+
-+ //     printk("mapserial_erase_block : erase block %d \n",block);
-+//      opcode = 0x80000000 | FLASH_ACCESS_ACTION_SHIFT_ADDRESS | cmd;
-+      opcode = 0x80000000 | 0x0200 | 0x50;
-+      address = (block << 13);
-+      writeflash_ctrl_reg(address,FLASH_ADDRESS_OFFSET);
-+      writeflash_ctrl_reg(opcode,FLASH_ACCESS_OFFSET);
-+      opcode=readflash_ctrl_reg(FLASH_ACCESS_OFFSET);
-+      while(opcode&0x80000000)
-+      {
-+          opcode = readflash_ctrl_reg(FLASH_ACCESS_OFFSET);
-+          count++;
-+          if (count > 10000)
-+          {
-+            return (MTD_ERASE_FAILED);
-+          }
-+      }
-+      return (MTD_ERASE_DONE);
-+#endif
-+}
-+
-+static int mapserial_erase(struct mtd_info *mtd, struct erase_info *instr)
-+{
-+	struct map_info *map = (struct map_info *)mtd->priv;
-+    unsigned int    addr;
-+    int             len;
-+    unsigned int    block;
-+    unsigned int    ret=0;
-+
-+	addr = instr->addr;
-+	len = instr->len;
-+    while (len > 0)
-+    {
-+        block = addr / mtd->erasesize;
-+#ifdef CONFIG_MTD_SL2312_SERIAL_ST
-+        ret = mapserial_erase_block(map,addr);
-+#else
-+		ret = mapserial_erase_block(map,block);
-+#endif
-+        addr = addr + mtd->erasesize;
-+        len = len - mtd->erasesize;
-+    }
-+    return (ret);
-+}
-+
-+static int mapserial_read (struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, u_char *buf)
-+{
-+	struct map_info *map = (struct map_info *)mtd->priv;
-+//        printk("mapserial_read : \n");
-+	map->copy_from(map, buf, from, len);
-+	*retlen = len;
-+	return 0;
-+}
-+
-+static void mapserial_nop(struct mtd_info *mtd)
-+{
-+	/* Nothing to see here */
-+}
-+
-+static int mapserial_write (struct mtd_info *mtd, loff_t to, size_t len, size_t *retlen, const u_char *buf)
-+{
-+	struct map_info *map = (struct map_info *)mtd->priv;
-+//	printk("mapserial_write : buf %x to %x len %x \n",(int)buf, (int)to, (int)len);
-+	//map->copy_to(map, buf, to, len);
-+	map->copy_to(map, to, buf, len);
-+	*retlen = len;
-+	return 0;
-+}
-+
-+int __init map_serial_init(void)
-+{
-+	register_mtd_chip_driver(&mapserial_chipdrv);
-+	return 0;
-+}
-+
-+static void __exit map_serial_exit(void)
-+{
-+	unregister_mtd_chip_driver(&mapserial_chipdrv);
-+}
-+
-+module_init(map_serial_init);
-+module_exit(map_serial_exit);
-+
-+MODULE_LICENSE("GPL");
-+MODULE_AUTHOR("David Woodhouse ");
-+MODULE_DESCRIPTION("MTD chip driver for ROM chips");
---- a/drivers/mtd/maps/Kconfig
-+++ b/drivers/mtd/maps/Kconfig
-@@ -614,5 +614,30 @@
- 
- 	  This selection automatically selects the map_ram driver.
- 
-+#***************************************************************************************
-+# Storlink parallel/Serial Flash configuration
-+#***************************************************************************************
-+config MTD_SL2312_CFI
-+        tristate "CFI Flash device mapped on SL2312"
-+        depends on MTD_CFI
-+        help
-+          Map driver for SL2312 demo board.
-+
-+config MTD_SL2312_SERIAL_ATMEL
-+        tristate "ATMEL Serial Flash device mapped on SL2312"
-+        depends on MTD_PARTITIONS && ARCH_SL2312
-+        help
-+          Map driver for SL2312 demo board.
-+
-+config MTD_SL2312_SERIAL_ST
-+        tristate "ST Serial Flash device mapped on SL2312"
-+        depends on MTD_PARTITIONS && ARCH_SL2312
-+        help
-+          Map driver for SL2312 demo board.
-+
-+config SL2312_SHARE_PIN
-+        tristate "Parallel Flash share pin on SL2312 ASIC"
-+        depends on SL3516_ASIC
-+
- endmenu
- 
---- /dev/null
-+++ b/drivers/mtd/maps/sl2312-flash-atmel.c
-@@ -0,0 +1,554 @@
-+/*
-+ * $Id: sl2312-flash-atmel.c,v 1.2 2006/06/05 02:35:57 middle Exp $
-+ *
-+ * Flash and EPROM on Hitachi Solution Engine and similar boards.
-+ *
-+ * (C) 2001 Red Hat, Inc.
-+ *
-+ * GPL'd
-+ */
-+
-+#include 
-+#include 
-+#include 
-+
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+
-+#include 
-+#include 
-+#include  //add
-+
-+
-+#define  g_page_addr  AT45DB321_PAGE_SHIFT    //321 : shift 10  ; 642 : shift 11
-+#define  g_chipen     SERIAL_FLASH_CHIP0_EN   //atmel
-+
-+extern int parse_redboot_partitions(struct mtd_info *master, struct mtd_partition **pparts);
-+
-+void address_to_page(__u32 address, __u16 *page, __u16 *offset)
-+{
-+    *page = address / SPAGE_SIZE;
-+    *offset = address % SPAGE_SIZE;
-+}
-+
-+static __u32 read_flash_ctrl_reg(__u32 ofs)
-+{
-+    __u32 *base;
-+
-+    base = (__u32 *)IO_ADDRESS((SL2312_FLASH_CTRL_BASE + ofs));
-+    return __raw_readl(base);
-+}
-+
-+static void write_flash_ctrl_reg(__u32 ofs,__u32 data)
-+{
-+    __u32 *base;
-+
-+    base = (__u32 *)IO_ADDRESS((SL2312_FLASH_CTRL_BASE + ofs));
-+    __raw_writel(data, base);
-+}
-+
-+void atmel_read_status(__u8 cmd, __u8 *data)
-+{
-+      __u32 opcode;
-+      __u32 value;
-+
-+      opcode = 0x80000000 | FLASH_ACCESS_ACTION_OPCODE_DATA | cmd | g_chipen;
-+      write_flash_ctrl_reg(FLASH_ACCESS_OFFSET, opcode);
-+      opcode=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET);
-+      while(opcode&0x80000000)
-+      {
-+          opcode=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET);
-+          flash_delay();
-+          schedule();
-+      }
-+
-+      value=read_flash_ctrl_reg(FLASH_READ_DATA_OFFSET);
-+      *data = value & 0xff;
-+}
-+
-+void main_memory_page_read(__u8 cmd, __u16 page, __u16 offset, __u8 *data)
-+{
-+      __u32 opcode;
-+      __u32 address;
-+      __u32 value;
-+
-+      opcode = 0x80000000 | FLASH_ACCESS_ACTION_SHIFT_ADDRESS_4X_DATA | cmd | g_chipen;
-+      address = (page << g_page_addr) + offset;
-+      write_flash_ctrl_reg(FLASH_ADDRESS_OFFSET, address);
-+      write_flash_ctrl_reg(FLASH_ACCESS_OFFSET, opcode);
-+      opcode=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET);
-+      while(opcode&0x80000000)
-+      {
-+          opcode=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET);
-+          flash_delay();
-+          schedule();
-+      }
-+
-+      value=read_flash_ctrl_reg(FLASH_READ_DATA_OFFSET);
-+      *data = value & 0xff;
-+}
-+
-+void buffer_to_main_memory(__u8 cmd, __u16 page)
-+{
-+      __u32 opcode;
-+      __u32 address;
-+      __u8  status;
-+
-+      opcode = 0x80000000 | FLASH_ACCESS_ACTION_SHIFT_ADDRESS | cmd | g_chipen;
-+      address = (page << g_page_addr);
-+      write_flash_ctrl_reg(FLASH_ADDRESS_OFFSET, address);
-+      write_flash_ctrl_reg(FLASH_ACCESS_OFFSET, opcode);
-+      opcode=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET);
-+      while(opcode&0x80000000)
-+      {
-+          opcode=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET);
-+          flash_delay();
-+          schedule();
-+      }
-+      atmel_read_status(READ_STATUS_SPI, &status);
-+      while(!(status&0x80))
-+      {
-+          atmel_read_status(READ_STATUS_SPI, &status);
-+          flash_delay();
-+          schedule();
-+      }
-+
-+}
-+
-+
-+void atmel_flash_read_page(__u32 address, __u8 *buffer, __u32 len)
-+{
-+    __u8  byte;
-+    __u16 page, offset;
-+    __u16 i;
-+
-+    address_to_page(address, &page, &offset);
-+
-+     for(i=0; i> 8;
-+//printk("sl2312_write32:: address = %08x  data = %c \n",ofs,byte);
-+    }
-+#else
-+      write_flash_ctrl_reg(ofs, d);
-+#endif
-+}
-+
-+void sl2312_write8(struct map_info *map, __u8 d, unsigned long ofs)
-+{
-+     __u16 page, offset;
-+
-+     address_to_page(ofs, &page, &offset);
-+     main_memory_page_program(MAIN_MEMORY_PROGRAM_BUFFER1, page, offset, d);
-+//printk("sl2312_write8:: address = %08x  data = %c \n",ofs,d);
-+
-+}
-+
-+void sl2312_copy_from(struct map_info *map, void *buf, unsigned long ofs, ssize_t len)
-+{
-+     __u32 size;
-+     __u8  *buffer;
-+     __u32 length;//i, j,
-+
-+     //printk("sl2312_copy_from:: address = %08x  datalen = %d \n",ofs,len);
-+
-+     length = len;
-+     buffer = (__u8 *)buf;
-+     while(len)
-+     {
-+        size = SPAGE_SIZE - (ofs%SPAGE_SIZE);
-+        if(size > len)
-+            size = len;
-+        atmel_flash_read_page(ofs, buffer, size);
-+        buffer+=size;
-+        ofs+=size;
-+        len -= size;
-+     }
-+
-+#if 0
-+        buffer = (__u8 *)buf;
-+        for(i=0; i len)
-+            size = len;
-+        atmel_flash_program_page(ofs, buffer, size);
-+        buffer+=size;
-+        ofs+=size;
-+	len-=size;
-+    }
-+
-+
-+}
-+
-+
-+static struct mtd_info *serial_mtd;
-+
-+static struct mtd_partition *parsed_parts;
-+
-+static struct map_info sl2312_serial_map = {
-+//	name: "SL2312 serial flash",
-+//	size: 4194304, //0x400000,
-+//		//buswidth: 4,
-+//	bankwidth: 4,
-+//	phys:		 SL2312_FLASH_BASE,
-+//#ifdef CONFIG_MTD_COMPLEX_MAPPINGS
-+//	//read32: sl2312_read32,
-+//	//read8: sl2312_read8,
-+//	copy_from: sl2312_copy_from,
-+//	//write8: sl2312_write8,
-+//	//write32: sl2312_write32,
-+//	read: sl2312_read32,
-+//	write: sl2312_write32,
-+//	copy_to: sl2312_copy_to
-+//#endif
-+	.name = "SL2312 serial flash",
-+	.size = 4194304, //0x400000,
-+		//buswidth: 4,
-+	.bankwidth = 4,
-+	.phys =		 SL2312_FLASH_BASE,
-+#ifdef CONFIG_MTD_COMPLEX_MAPPINGS
-+	//read32: sl2312_read32,
-+	//read8: sl2312_read8,
-+	.copy_from = sl2312_copy_from,
-+	//write8: sl2312_write8,
-+	//write32: sl2312_write32,
-+	.read = sl2312_read32,
-+	.write = sl2312_write32,
-+	.copy_to = sl2312_copy_to
-+#endif
-+};
-+
-+
-+
-+static struct mtd_partition sl2312_partitions[] = {
-+
-+
-+	///* boot code */
-+	//{ name: "bootloader", offset: 0x00000000, size: 0x20000, },
-+	///* kernel image */
-+	//{ name: "kerel image", offset: 0x000020000, size: 0x2E0000 },
-+	///* All else is writable (e.g. JFFS) */
-+	//{ name: "user data", offset: 0x00300000, size: 0x00100000, },
-+	/* boot code */
-+	{ .name = "bootloader", .offset = 0x00000000, .size = 0x20000, },
-+	/* kernel image */
-+	{ .name = "kerel image", .offset = 0x000020000, .size = 0xE0000 },
-+	/* All else is writable (e.g. JFFS) */
-+	{ .name = "user data", .offset = 0x00100000, .size = 0x00300000, },
-+
-+
-+};
-+
-+
-+
-+static int __init init_sl2312_maps(void)
-+{
-+	int nr_parts = 0;
-+	struct mtd_partition *parts;
-+
-+	serial_mtd = kmalloc(sizeof(struct mtd_info), GFP_KERNEL);
-+	if (!serial_mtd)
-+		return NULL;
-+
-+	memset(serial_mtd, 0, sizeof(struct mtd_info));
-+	//sl2312flash_map.virt = (unsigned long)ioremap(SL2312_FLASH_BASE, FLASH_SIZE);
-+    //sl2312_serial_map.map_priv_1 = (unsigned long)ioremap(SL2312_FLASH_BASE, SFLASH_SIZE);//(unsigned long)FLASH_VBASE;
-+    sl2312_serial_map.virt = (unsigned long)ioremap(SL2312_FLASH_BASE, SFLASH_SIZE);//(unsigned long)ioremap(FLASH_START, SFLASH_SIZE);
-+    if (!sl2312_serial_map.virt) {
-+		printk(" failed to ioremap \n");
-+		return -EIO;
-+	}
-+	serial_mtd = do_map_probe("map_serial", &sl2312_serial_map);
-+	if (serial_mtd) {
-+		//serial_mtd->module = THIS_MODULE;
-+		serial_mtd->owner = THIS_MODULE;
-+
-+	}
-+
-+#ifdef CONFIG_MTD_REDBOOT_PARTS
-+	nr_parts = parse_redboot_partitions(serial_mtd, &parsed_parts);
-+	if (nr_parts > 0)
-+		printk(KERN_NOTICE "Found RedBoot partition table.\n");
-+	else if (nr_parts < 0)
-+		printk(KERN_NOTICE "Error looking for RedBoot partitions.\n");
-+#else
-+	parsed_parts = sl2312_partitions;
-+	parts = sl2312_partitions;
-+	nr_parts = sizeof(sl2312_partitions)/sizeof(*parts);
-+	nr_parts = sizeof(sl2312_partitions)/sizeof(*parsed_parts);
-+#endif /* CONFIG_MTD_REDBOOT_PARTS */
-+
-+	if (nr_parts > 0)
-+	    add_mtd_partitions(serial_mtd, parsed_parts, nr_parts);
-+	else
-+	    add_mtd_device(serial_mtd);
-+
-+	return 0;
-+}
-+
-+static void __exit cleanup_sl2312_maps(void)
-+{
-+	if (parsed_parts)
-+	    del_mtd_partitions(serial_mtd);
-+	else
-+	    del_mtd_device(serial_mtd);
-+
-+	map_destroy(serial_mtd);
-+
-+
-+}
-+
-+module_init(init_sl2312_maps);
-+module_exit(cleanup_sl2312_maps);
-+
-+
-+
-+MODULE_LICENSE("GPL");
-+MODULE_AUTHOR("Plus Chen ");
-+MODULE_DESCRIPTION("MTD map driver for Storlink Sword boards");
-+
---- /dev/null
-+++ b/drivers/mtd/maps/sl2312-flash-cfi.c
-@@ -0,0 +1,370 @@
-+/*======================================================================
-+
-+   This program is free software; you can redistribute it and/or modify
-+   it under the terms of the GNU General Public License as published by
-+   the Free Software Foundation; either version 2 of the License, or
-+   (at your option) any later version.
-+
-+   This program is distributed in the hope that it will be useful,
-+   but WITHOUT ANY WARRANTY; without even the implied warranty of
-+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+   GNU General Public License for more details.
-+
-+   You should have received a copy of the GNU General Public License
-+   along with this program; if not, write to the Free Software
-+   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
-+======================================================================*/
-+
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+
-+#include 
-+#include 
-+#include 
-+
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include "sl2312_flashmap.h"
-+
-+
-+//extern int parse_afs_partitions(struct mtd_info *, struct mtd_partition **);
-+
-+/* the base address of FLASH control register */
-+#define FLASH_CONTROL_BASE_ADDR	    (IO_ADDRESS(SL2312_FLASH_CTRL_BASE))
-+#define SL2312_GLOBAL_BASE_ADDR     (IO_ADDRESS(SL2312_GLOBAL_BASE))
-+
-+/* define read/write register utility */
-+#define FLASH_READ_REG(offset)			(__raw_readl(offset+FLASH_CONTROL_BASE_ADDR))
-+#define FLASH_WRITE_REG(offset,val) 	(__raw_writel(val,offset+FLASH_CONTROL_BASE_ADDR))
-+
-+/* the offset of FLASH control register */
-+enum EMAC_REGISTER {
-+	FLASH_ID     	= 0x0000,
-+	FLASH_STATUS 	= 0x0008,
-+	FLASH_TYPE   	= 0x000c,
-+	FLASH_ACCESS	= 0x0020,
-+	FLASH_ADDRESS   = 0x0024,
-+	FLASH_DATA		= 0x0028,
-+	FLASH_TIMING    = 0x002c,
-+};
-+
-+//#define FLASH_BASE	FLASH_CONTROL_BASE_ADDR
-+//#define FLASH_SIZE	0x00800000 //INTEGRATOR_FLASH_SIZE
-+
-+//#define FLASH_PART_SIZE 8388608
-+
-+static unsigned int flash_indirect_access = 0;
-+
-+#ifdef CONFIG_SL2312_SHARE_PIN
-+static unsigned int chip_en = 0x00000000;
-+
-+void sl2312flash_enable_parallel_flash(void)
-+{
-+    unsigned int    reg_val;
-+
-+    reg_val = readl(SL2312_GLOBAL_BASE_ADDR + 0x30);
-+    reg_val = reg_val & 0xfffffffd;
-+    writel(reg_val,SL2312_GLOBAL_BASE_ADDR + 0x30);
-+    return;
-+}
-+
-+void sl2312flash_disable_parallel_flash(void)
-+{
-+    unsigned int    reg_val;
-+
-+    reg_val = readl(SL2312_GLOBAL_BASE_ADDR + 0x30);
-+    reg_val = reg_val | 0x00000002;
-+    writel(reg_val,SL2312_GLOBAL_BASE_ADDR + 0x30);
-+    return;
-+}
-+#endif
-+
-+
-+static struct map_info sl2312flash_map =
-+{
-+	name:		"SL2312 CFI Flash",
-+	size:       FLASH_SIZE,
-+	bankwidth:   2,
-+	//bankwidth:   1, //for 8 bits width
-+    phys:       SL2312_FLASH_BASE,
-+};
-+
-+static struct mtd_info *mtd;
-+#if 0
-+static struct mtd_partition sl2312_partitions[] = {
-+	/* boot code */
-+	{
-+		name: "bootloader",
-+		offset: 0x00000000,
-+		size: 0x20000,
-+//		mask_flags: MTD_WRITEABLE,
-+	},
-+	/* kernel image */
-+	{
-+		name: "kerel image",
-+		offset: 0x00020000,
-+		size: 0x2E0000
-+	},
-+	/* All else is writable (e.g. JFFS) */
-+	{
-+		name: "user data",
-+		offset: 0x00300000,
-+		size: 0x00100000,
-+	}
-+};
-+#endif
-+
-+
-+
-+static int __init sl2312flash_init(void)
-+{
-+	struct mtd_partition *parts;
-+	int nr_parts = 0;
-+	int ret;
-+#ifndef CONFIG_SL2312_SHARE_PIN
-+    unsigned int    reg_val;
-+#endif
-+
-+    printk("SL2312 MTD Driver Init.......\n");
-+
-+#ifndef CONFIG_SL2312_SHARE_PIN
-+	/* enable flash */
-+    reg_val = readl(SL2312_GLOBAL_BASE_ADDR + 0x30);
-+    reg_val = reg_val & 0xfffffffd;
-+    writel(reg_val,SL2312_GLOBAL_BASE_ADDR + 0x30);
-+#else
-+    sl2312flash_enable_parallel_flash();      /* enable Parallel FLASH */
-+#endif
-+    FLASH_WRITE_REG(FLASH_ACCESS,0x00004000); /* parallel flash direct access mode */
-+    ret = FLASH_READ_REG(FLASH_ACCESS);
-+    if (ret == 0x00004000)
-+    {
-+        flash_indirect_access = 0;  /* parallel flash direct access */
-+    }
-+    else
-+    {
-+        flash_indirect_access = 1;  /* parallel flash indirect access */
-+    }
-+
-+	/*
-+	 * Also, the CFI layer automatically works out what size
-+	 * of chips we have, and does the necessary identification
-+	 * for us automatically.
-+	 */
-+#ifdef CONFIG_GEMINI_IPI
-+	sl2312flash_map.virt = FLASH_VBASE;//(unsigned int *)ioremap(SL2312_FLASH_BASE, FLASH_SIZE);
-+#else
-+	sl2312flash_map.virt = (unsigned int *)ioremap(SL2312_FLASH_BASE, FLASH_SIZE);
-+#endif
-+	//printk("sl2312flash_map.virt  = %08x\n",(unsigned int)sl2312flash_map.virt);
-+
-+//	simple_map_init(&sl2312flash_map);
-+
-+	mtd = do_map_probe("cfi_probe", &sl2312flash_map);
-+	if (!mtd)
-+	{
-+#ifdef CONFIG_SL2312_SHARE_PIN
-+        sl2312flash_disable_parallel_flash();      /* disable Parallel FLASH */
-+#endif
-+		return -ENXIO;
-+	}
-+	mtd->owner = THIS_MODULE;
-+//    mtd->erase = flash_erase;
-+//    mtd->read = flash_read;
-+//    mtd->write = flash_write;
-+
-+    parts = sl2312_partitions;
-+	nr_parts = sizeof(sl2312_partitions)/sizeof(*parts);
-+	ret = add_mtd_partitions(mtd, parts, nr_parts);
-+	/*If we got an error, free all resources.*/
-+	if (ret < 0) {
-+		del_mtd_partitions(mtd);
-+		map_destroy(mtd);
-+	}
-+#ifdef CONFIG_SL2312_SHARE_PIN
-+    sl2312flash_disable_parallel_flash();      /* disable Parallel FLASH */
-+#endif
-+    printk("SL2312 MTD Driver Init Success ......\n");
-+	return ret;
-+}
-+
-+static void __exit sl2312flash_exit(void)
-+{
-+	if (mtd) {
-+		del_mtd_partitions(mtd);
-+		map_destroy(mtd);
-+	}
-+
-+	if (sl2312flash_map.virt) {
-+	    iounmap((void *)sl2312flash_map.virt);
-+	    sl2312flash_map.virt = 0;
-+	}
-+}
-+
-+char chrtohex(char c)
-+{
-+  char val;
-+  if ((c >= '0') && (c <= '9'))
-+  {
-+    val = c - '0';
-+    return val;
-+  }
-+  else if ((c >= 'a') && (c <= 'f'))
-+  {
-+    val = 10 + (c - 'a');
-+    return val;
-+  }
-+  else if ((c >= 'A') && (c <= 'F'))
-+  {
-+    val = 10 + (c - 'A');
-+    return val;
-+  }
-+  printk("<1>Error number\n");
-+  return 0;
-+}
-+
-+
-+int get_vlaninfo(vlaninfo* vlan)
-+{
-+	vctl_mheader head;
-+	vctl_entry entry;
-+	struct mtd_info *mymtd=NULL;
-+	int i, j, loc = 0;
-+	char *payload=0, *tmp1, *tmp2, tmp3[9];
-+	size_t retlen;
-+
-+	#ifdef CONFIG_SL2312_SHARE_PIN
-+	sl2312flash_enable_parallel_flash();
-+	#endif
-+	for(i=0;iname: %s\n", mymtd->name);
-+		if(mymtd && !strcmp(mymtd->name,"VCTL"))
-+		{
-+			//      printk("%s\n", mymtd->name);
-+			break;
-+		}
-+	}
-+	if( i >= MAX_MTD_DEVICES)
-+	{
-+		printk("Can't find version control\n");
-+		#ifdef CONFIG_SL2312_SHARE_PIN
-+		sl2312flash_disable_parallel_flash();
-+		#endif
-+		return 0;
-+	}
-+
-+	if (!mymtd | !mymtd->read)
-+	{
-+		printk("<1>Can't read Version Configuration\n");
-+		#ifdef CONFIG_SL2312_SHARE_PIN
-+		sl2312flash_disable_parallel_flash();
-+		#endif
-+		return 0;
-+	}
-+
-+	mymtd->read(mymtd, 0, VCTL_HEAD_SIZE, &retlen, (u_char*)&head);
-+	//  printk("entry header: %c%c%c%c\n", head.header[0], head.header[1], head.header[2], head.header[3]);
-+	//  printk("entry number: %x\n", head.entry_num);
-+	if ( strncmp(head.header, "FLFM", 4) )
-+	{
-+		printk("VCTL is a erase block\n");
-+		#ifdef CONFIG_SL2312_SHARE_PIN
-+		sl2312flash_disable_parallel_flash();
-+		#endif
-+		return 0;
-+	}
-+	loc += retlen;
-+	for (i = 0; i < head.entry_num; i++)
-+	{
-+		mymtd->read(mymtd, loc, VCTL_ENTRY_LEN, &retlen, (u_char*)&entry);
-+		//    printk("type: %x\n", entry.type);
-+		//    printk("size: %x\n", entry.size);
-+		strncpy(tmp3, entry.header, 4);
-+		if (entry.type == VCT_VLAN)
-+		{
-+			for (j = 0; j < 6 ; j++)
-+			{
-+				vlan[0].mac[j] = 0;
-+				vlan[1].mac[j] = 0;
-+			}
-+			vlan[0].vlanid = 1;
-+			vlan[1].vlanid = 2;
-+			vlan[0].vlanmap = 0x7F;
-+			vlan[1].vlanmap = 0x80;
-+
-+			payload = (char *)kmalloc(entry.size - VCTL_ENTRY_LEN, GFP_KERNEL);
-+			loc += VCTL_ENTRY_LEN;
-+			mymtd->read(mymtd, loc, entry.size - VCTL_ENTRY_LEN, &retlen, payload);
-+			//      printk("%s\n", payload);
-+			tmp1 = strstr(payload, "MAC1:");
-+			tmp2 = strstr(payload, "MAC2:");
-+			if(!tmp1||!tmp2){
-+				kfree(payload);
-+				#ifdef CONFIG_SL2312_SHARE_PIN
-+				sl2312flash_disable_parallel_flash();
-+				#endif
-+				printk("Error VCTL format!!\n");
-+				return 0;
-+			}
-+			tmp1 += 7;
-+			tmp2 += 7;
-+
-+
-+			for (j = 0; j < 6; j++)
-+			{
-+				vlan[0].mac[j] = chrtohex(tmp1[2*j])*16 + chrtohex(tmp1[(2*j)+1]);
-+				vlan[1].mac[j] = chrtohex(tmp2[2*j])*16 + chrtohex(tmp2[(2*j)+1]);
-+			}
-+			tmp1 = strstr(payload, "ID1:");
-+			tmp2 = strstr(payload, "ID2:");
-+			tmp1 += 4;
-+			tmp2 += 4;
-+			vlan[0].vlanid = tmp1[0] - '0';
-+			vlan[1].vlanid = tmp2[0] - '0';
-+			tmp1 = strstr(payload, "MAP1:");
-+			tmp2 = strstr(payload, "MAP2:");
-+			tmp1 += 7;
-+			tmp2 += 7;
-+			vlan[0].vlanmap = chrtohex(tmp1[0]) * 16 + chrtohex(tmp1[1]);
-+			vlan[1].vlanmap = chrtohex(tmp2[0]) * 16 + chrtohex(tmp2[1]);
-+			//  printk("Vlan1 id:%x map:%02x mac:%x%x%x%x%x%x\n", vlan[0].vlanid, vlan[0].vlanmap, vlan[0].mac[0], vlan[0].mac[1], vlan[0].mac[2], vlan[0].mac[3], vlan[0].mac[4], vlan[0].mac[5]);
-+			//  printk("Vlan2 id:%x map:%02x mac:%x%x%x%x%x%x\n", vlan[1].vlanid, vlan[1].vlanmap, vlan[1].mac[0], vlan[1].mac[1], vlan[1].mac[2], vlan[1].mac[3], vlan[1].mac[4], vlan[1].mac[5]);
-+			break;
-+		}
-+		loc += entry.size;
-+	}
-+	if ( entry.type == VCT_VLAN )
-+	{
-+		#ifdef CONFIG_SL2312_SHARE_PIN
-+		sl2312flash_disable_parallel_flash();
-+		#endif
-+		kfree(payload);
-+		return 1;
-+	}
-+	if (i >= head.entry_num)
-+	printk("Can't find vlan information\n");
-+	#ifdef CONFIG_SL2312_SHARE_PIN
-+	sl2312flash_disable_parallel_flash();
-+	#endif
-+	return 0;
-+}
-+
-+EXPORT_SYMBOL(get_vlaninfo);
-+
-+
-+module_init(sl2312flash_init);
-+module_exit(sl2312flash_exit);
-+
-+MODULE_AUTHOR("Storlink Ltd");
-+MODULE_DESCRIPTION("CFI map driver");
-+MODULE_LICENSE("GPL");
---- /dev/null
-+++ b/drivers/mtd/maps/sl2312-flash-m25p80.c
-@@ -0,0 +1,498 @@
-+/*
-+ * $Id: sl2312-flash-m25p80.c,v 1.2 2006/06/02 08:46:02 middle Exp $
-+ *
-+ * Flash and EPROM on Hitachi Solution Engine and similar boards.
-+ *
-+ * (C) 2001 Red Hat, Inc.
-+ *
-+ * GPL'd
-+ */
-+
-+#include 
-+#include 
-+#include 
-+
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+
-+#include 
-+#include 
-+#include  //add
-+#define  g_chipen     SERIAL_FLASH_CHIP0_EN   //ST
-+
-+//static int m25p80_page_program(__u32 address, __u8 data, __u32 schip_en);
-+static void m25p80_write_cmd(__u8 cmd, __u32 schip_en);
-+extern int parse_redboot_partitions(struct mtd_info *master, struct mtd_partition **pparts);
-+
-+
-+static __u32 read_flash_ctrl_reg(__u32 ofs)
-+{
-+    __u32 *base;
-+
-+    base = (__u32 *)IO_ADDRESS((SL2312_FLASH_CTRL_BASE + ofs));
-+    return __raw_readl(base);
-+}
-+
-+static void write_flash_ctrl_reg(__u32 ofs,__u32 data)
-+{
-+    __u32 *base;
-+
-+    base = (__u32 *)IO_ADDRESS((SL2312_FLASH_CTRL_BASE + ofs));
-+    __raw_writel(data, base);
-+}
-+
-+static void m25p80_read(__u32 address, __u8 *data, __u32 schip_en)
-+{
-+      __u32 opcode,status;
-+      __u32 value;
-+
-+      //opcode = 0x80000000 | FLASH_ACCESS_ACTION_OPCODE_DATA | M25P80_READ;
-+      opcode = 0x80000000 | FLASH_ACCESS_ACTION_SHIFT_ADDRESS_DATA | M25P80_READ;
-+      write_flash_ctrl_reg(FLASH_ADDRESS_OFFSET, address);
-+
-+      	opcode|=g_chipen;
-+
-+      write_flash_ctrl_reg(FLASH_ACCESS_OFFSET, opcode);
-+      status=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET);
-+      while(status&0x80000000)
-+      {
-+          status=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET);
-+          flash_delay();
-+          schedule();
-+      }
-+
-+      value=read_flash_ctrl_reg(FLASH_READ_DATA_OFFSET);
-+      *data = value & 0xff;
-+}
-+
-+static int m25p80_page_program(__u32 address, __u8 *data, __u32 schip_en)
-+{
-+      __u32 opcode;
-+      __u32  status;
-+	  __u32 tmp;
-+	  int res = FLASH_ERR_OK;
-+	  //volatile FLASH_DATA_T* data_ptr = (volatile FLASH_DATA_T*) data;
-+	  opcode = 0x80000000 | FLASH_ACCESS_ACTION_OPCODE_DATA | M25P80_READ_STATUS;
-+
-+      	      opcode|=g_chipen;
-+
-+          write_flash_ctrl_reg(FLASH_ACCESS_OFFSET, opcode);
-+          tmp=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET);
-+      			while(tmp&0x80000000)
-+      			{
-+      			    tmp=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET);
-+      			    flash_delay();
-+      			    schedule();
-+      			}
-+          //middle delay_ms(130);
-+          status = read_flash_ctrl_reg(FLASH_READ_DATA_OFFSET);
-+          if((status&0x02)==0x02)
-+      	  {
-+      	       //middle delay_ms(100);
-+               m25p80_write_cmd(M25P80_WRITE_DISABLE, schip_en);
-+          }
-+
-+
-+      m25p80_write_cmd(M25P80_WRITE_ENABLE, schip_en);
-+      ////middle delay_ms(10);
-+      opcode = 0x80000000 | FLASH_ACCESS_ACTION_SHIFT_ADDRESS_DATA | M25P80_PAGE_PROGRAM;
-+      write_flash_ctrl_reg(FLASH_ADDRESS_OFFSET, address);
-+      write_flash_ctrl_reg(FLASH_WRITE_DATA_OFFSET, *data);
-+
-+      //status = read_flash_ctrl_reg(FLASH_READ_DATA_OFFSET);
-+      //while(status!=data)
-+      //{
-+      //    status = read_flash_ctrl_reg(FLASH_READ_DATA_OFFSET);
-+      //    //middle delay_ms(10);
-+      //}
-+
-+      	opcode|=g_chipen;
-+
-+      write_flash_ctrl_reg(FLASH_ACCESS_OFFSET, opcode);
-+      tmp=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET);
-+      			while(tmp&0x80000000)
-+      			{
-+      			    tmp=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET);
-+      			    flash_delay();
-+      			    schedule();
-+      			}
-+      //opcode=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET);
-+
-+      opcode = 0x80000000 | FLASH_ACCESS_ACTION_OPCODE_DATA | M25P80_READ_STATUS;
-+
-+      	opcode|=g_chipen;
-+
-+
-+      write_flash_ctrl_reg(FLASH_ACCESS_OFFSET, opcode);
-+      tmp=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET);
-+      			while(tmp&0x80000000)
-+      			{
-+      			    tmp=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET);
-+      			    flash_delay();
-+      			    schedule();
-+      			}
-+      status = read_flash_ctrl_reg(FLASH_READ_DATA_OFFSET);
-+      //while(status&0xfd)
-+      while(status&0x01)
-+      {
-+      	  //if((status&0x9c)!=0)
-+      	  //	printf("  m25p80_page_program	Protect Status = %x\n",status);
-+      	  write_flash_ctrl_reg(FLASH_ACCESS_OFFSET, opcode);
-+      	  tmp=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET);
-+      			while(tmp&0x80000000)
-+      			{
-+      			    tmp=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET);
-+      			    flash_delay();
-+      			    schedule();
-+      			}
-+          status = read_flash_ctrl_reg(FLASH_READ_DATA_OFFSET);
-+          flash_delay();
-+          schedule();
-+          //middle delay_ms(50);
-+      }
-+      //printf("status = %x, data = %x\n",status,data);
-+      if((status&0x02)==0x02)
-+      {
-+	  //middle delay_ms(100);
-+          m25p80_write_cmd(M25P80_WRITE_DISABLE, schip_en);
-+      }
-+    //};//while (len > 0)
-+    return res;
-+}
-+
-+void m25p80_copy_from(struct map_info *map, void *buf, unsigned long ofs, ssize_t len)
-+{
-+//     __u32 size;
-+     __u8  *buffer;
-+     __u32 length;//i, j,
-+
-+	length = len;
-+     buffer = (__u8 *)buf;
-+     while(len)
-+     {
-+        m25p80_read(ofs, buffer, g_chipen);
-+        buffer++;
-+        ofs++;
-+        len --;
-+     }	;
-+
-+}
-+
-+__u32 m25p80_read32(struct map_info *map, unsigned long ofs)
-+{
-+
-+      return read_flash_ctrl_reg(ofs);
-+
-+
-+}
-+
-+void m25p80_write32(struct map_info *map, __u32 d, unsigned long ofs)
-+{
-+
-+      write_flash_ctrl_reg(ofs, d);
-+
-+}
-+
-+void m25p80_copy_to(struct map_info *map, unsigned long ofs, void *buf, ssize_t len)
-+{
-+     __u32 size, i, ret;
-+
-+     while(len > 0)
-+     {
-+        if(len >= M25P80_PAGE_SIZE)
-+			size = M25P80_PAGE_SIZE;
-+		else
-+			size = len;
-+
-+        for(i=0;im25p80_sector_erase");
-+	if(address >= FLASH_START)
-+		address-=FLASH_START;
-+
-+      m25p80_write_cmd(M25P80_WRITE_ENABLE, schip_en);
-+      //printf("\n     m25p80_sector_erase : after we-en");
-+      opcode = 0x80000000 | FLASH_ACCESS_ACTION_SHIFT_ADDRESS | M25P80_SECTOR_ERASE;
-+      write_flash_ctrl_reg(FLASH_ADDRESS_OFFSET, address);
-+      #ifdef MIDWAY_DIAG
-+      	opcode|=schip_en;
-+      #endif
-+      write_flash_ctrl_reg(FLASH_ACCESS_OFFSET, opcode);
-+      tmp=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET);
-+      			while(tmp&0x80000000)
-+      			{
-+      			    tmp=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET);
-+      			    flash_delay();
-+      			    schedule();
-+      			}
-+
-+      opcode = 0x80000000 | FLASH_ACCESS_ACTION_OPCODE_DATA | M25P80_READ_STATUS;
-+      #ifdef MIDWAY_DIAG
-+      	opcode|=schip_en;
-+      #endif
-+
-+      write_flash_ctrl_reg(FLASH_ACCESS_OFFSET, opcode);
-+      tmp=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET);
-+      			while(tmp&0x80000000)
-+      			{
-+      			    tmp=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET);
-+      			    flash_delay();
-+      			    schedule();
-+      			}
-+      status = read_flash_ctrl_reg(FLASH_READ_DATA_OFFSET);
-+      //while(status&0xfd)
-+      while(status&0x01)
-+      {
-+      	  //if((status&0x9c)!=0)
-+      	  //	printf("  m25p80_sector_erase	Protect Status = %x\n",status);
-+      	  write_flash_ctrl_reg(FLASH_ACCESS_OFFSET, opcode);
-+      	  tmp=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET);
-+      			while(tmp&0x80000000)
-+      			{
-+      			    tmp=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET);
-+      			    flash_delay();
-+      			    schedule();
-+      			}
-+          status = read_flash_ctrl_reg(FLASH_READ_DATA_OFFSET);
-+          flash_delay();
-+          schedule();
-+          //middle delay_ms(50);
-+      }
-+      if((status&0x02)==0x02)
-+      {
-+      	  //middle delay_ms(100);
-+          m25p80_write_cmd(M25P80_WRITE_DISABLE, schip_en);
-+      }
-+      //printf("\n<--m25p80_sector_erase");
-+      return res;
-+}
-+
-+static void m25p80_write_cmd(__u8 cmd, __u32 schip_en)
-+{
-+      __u32 opcode,tmp;
-+      __u32  status;
-+
-+
-+
-+
-+      opcode = 0x80000000 | FLASH_ACCESS_ACTION_OPCODE | cmd;
-+
-+      	opcode|=g_chipen;
-+
-+      write_flash_ctrl_reg(FLASH_ACCESS_OFFSET, opcode);
-+      tmp=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET);
-+      while(tmp&0x80000000)
-+      {
-+          tmp=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET);
-+          flash_delay();
-+          schedule();
-+      }
-+      //////
-+      opcode = 0x80000000 | FLASH_ACCESS_ACTION_OPCODE_DATA | M25P80_READ_STATUS;
-+
-+      	opcode|=g_chipen;
-+
-+      write_flash_ctrl_reg(FLASH_ACCESS_OFFSET, opcode);
-+      tmp=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET);
-+      while(tmp&0x80000000)
-+      {
-+          tmp=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET);
-+          flash_delay();
-+          schedule();
-+      }
-+      //middle delay_ms(130);
-+      status = read_flash_ctrl_reg(FLASH_READ_DATA_OFFSET);
-+      //printf("\ncmd =%x  status = %x",cmd,status);
-+      if(cmd==M25P80_WRITE_ENABLE)
-+      {
-+      	//printf("\n**-->enable**  status = %x",status);
-+      	//middle delay_ms(100);
-+      	   while((status&0x03) != 2)
-+      	   {
-+      	   	//if((status&0x9c)!=0)
-+      	  	//    printf("	M25P80_WRITE_ENABLE   Protect Status = %x\n",status);
-+
-+      	   	  write_flash_ctrl_reg(FLASH_ACCESS_OFFSET, opcode);
-+      	   	  tmp=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET);
-+      			while(tmp&0x80000000)
-+      			{
-+      			    tmp=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET);
-+      			    //flash_delay();
-+      			}
-+      	       status = read_flash_ctrl_reg(FLASH_READ_DATA_OFFSET);
-+      	       //printf("\n**enable**  status = %x",status);
-+      	       flash_delay();
-+      	       schedule();
-+      	       //middle delay_ms(100);
-+      	   }
-+      }
-+      else if(cmd==M25P80_WRITE_DISABLE)
-+      {
-+      	   //while((status&0x03) == 2)
-+      	   //   printf("\n**disable**  status = %x",status);
-+      	   //middle delay_ms(100);
-+      	   while((status&0x03) != 0)
-+      	   {
-+	       //m25p80_write_status((status&0xfd),schip_en);
-+      	       write_flash_ctrl_reg(FLASH_ACCESS_OFFSET, opcode);
-+      	       tmp=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET);
-+      		while(tmp&0x80000000)
-+      		{
-+      		    tmp=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET);
-+      		    flash_delay();
-+      		    schedule();
-+      		}
-+      	       status = read_flash_ctrl_reg(FLASH_READ_DATA_OFFSET);
-+      	       //printf("\n**disable**  status = %x",status);
-+      	       flash_delay();
-+      	       schedule();
-+      	       //middle delay_ms(50);
-+      	   }
-+      }
-+      else
-+      {
-+      	   //while((status&0x01) !=0)
-+      	   while((status&0x01) !=0)
-+      	   {
-+      	   	  write_flash_ctrl_reg(FLASH_ACCESS_OFFSET, opcode);
-+      	   	  tmp=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET);
-+      			while(tmp&0x80000000)
-+      			{
-+      			    tmp=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET);
-+      			    flash_delay();
-+      			    schedule();
-+      			}
-+      	       status = read_flash_ctrl_reg(FLASH_READ_DATA_OFFSET);
-+      	       flash_delay();
-+      	       schedule();
-+      	       //middle delay_ms(50);
-+      	   }
-+      }
-+      //////
-+
-+      //printf("\n<--  status = %x",status);
-+}
-+
-+static int __init init_sl2312_m25p80(void)
-+{
-+	int nr_parts = 0;
-+	struct mtd_partition *parts;
-+
-+	serial_mtd = kmalloc(sizeof(struct mtd_info), GFP_KERNEL);
-+	if (!serial_mtd)
-+		return NULL;
-+
-+	memset(serial_mtd, 0, sizeof(struct mtd_info));
-+	m25p80_map.virt = (unsigned long)ioremap(SL2312_FLASH_BASE, SFLASH_SIZE);//(unsigned long)ioremap(FLASH_START, SFLASH_SIZE);
-+    if (!m25p80_map.virt) {
-+		printk(" failed to ioremap \n");
-+		return -EIO;
-+	}
-+	serial_mtd = do_map_probe("map_serial", &m25p80_map);
-+	if (serial_mtd) {
-+		serial_mtd->owner = THIS_MODULE;
-+
-+	}
-+
-+#ifdef CONFIG_MTD_REDBOOT_PARTS
-+	nr_parts = parse_redboot_partitions(serial_mtd, &parsed_parts);
-+	if (nr_parts > 0)
-+		printk(KERN_NOTICE "Found RedBoot partition table.\n");
-+	else if (nr_parts < 0)
-+		printk(KERN_NOTICE "Error looking for RedBoot partitions.\n");
-+#else
-+	parsed_parts = m25p80_partitions;
-+	parts = m25p80_partitions;
-+	nr_parts = sizeof(m25p80_partitions)/sizeof(*parts);
-+	nr_parts = sizeof(m25p80_partitions)/sizeof(*parsed_parts);
-+#endif /* CONFIG_MTD_REDBOOT_PARTS */
-+
-+	if (nr_parts > 0)
-+	    add_mtd_partitions(serial_mtd, parsed_parts, nr_parts);
-+	else
-+	    add_mtd_device(serial_mtd);
-+
-+	return 0;
-+}
-+
-+static void __exit cleanup_sl2312_m25p80(void)
-+{
-+	if (parsed_parts)
-+	    del_mtd_partitions(serial_mtd);
-+	else
-+	    del_mtd_device(serial_mtd);
-+
-+	map_destroy(serial_mtd);
-+
-+
-+}
-+
-+module_init(init_sl2312_m25p80);
-+module_exit(cleanup_sl2312_m25p80);
-+
-+
-+
-+MODULE_LICENSE("GPL");
-+MODULE_AUTHOR("Plus Chen ");
-+MODULE_DESCRIPTION("MTD map driver for Storlink Sword boards");
-+
---- /dev/null
-+++ b/drivers/mtd/maps/sl2312_flashmap.h
-@@ -0,0 +1,21 @@
-+/*
-+ * Please note that the name are used in mkflash script. Therefore
-+ * don't change them.  If you want to add different partitions, you
-+ * will need to modify mkflash script as well so that the end image
-+ * is what you include here!
-+ *
-+ * Also, the 7th item is always the size, so please don't add extra
-+ * spaces in the name or other items.
-+ *
-+ *  - Alan
-+ */
-+
-+static struct mtd_partition sl2312_partitions[] = {
-+	{ name: "RedBoot", 	 offset: 0x00000000, size: 0x00020000, },
-+	{ name: "kernel", 	 offset: 0x00020000, size: 0x00100000, },
-+	{ name: "rootfs", 	 offset: 0x00120000, size: 0x00500000, },
-+	{ name: "rootfs_data", 	 offset: 0x00620000, size: 0x001A0000, },
-+	{ name: "VCTL", 	 offset: 0x007C0000, size: 0x00010000, },
-+	{ name: "cfg", 	 	 offset: 0x007D0000, size: 0x00020000, },
-+	{ name: "FIS directory", offset: 0x007F0000, size: 0x00010000, }
-+};
---- /dev/null
-+++ b/drivers/mtd/maps/sl2312_flashmap.h.16MB
-@@ -0,0 +1,21 @@
-+/*
-+ * Please note that the name are used in mkflash script. Therefore
-+ * don't change them.  If you want to add different partitions, you
-+ * will need to modify mkflash script as well so that the end image
-+ * is what you include here!
-+ *
-+ * Also, the 7th item is always the size, so please don't add extra
-+ * spaces in the name or other items.
-+ *
-+ *  - Alan
-+ */
-+
-+static struct mtd_partition sl2312_partitions[] = {
-+	{ name: "RedBoot",     	 offset: 0x00000000, size: 0x00020000, },
-+	{ name: "Kernel",      	 offset: 0x00020000, size: 0x00300000, },
-+	{ name: "Ramdisk",     	 offset: 0x00320000, size: 0x00600000, },
-+	{ name: "Application", 	 offset: 0x00920000, size: 0x00600000, },
-+	{ name: "VCTL", 	 offset: 0x00F20000, size: 0x00020000, },
-+	{ name: "CurConf", 	 offset: 0x00F40000, size: 0x000A0000, },
-+	{ name: "FIS directory", offset: 0x00FE0000, size: 0x00020000, }
-+};
---- /dev/null
-+++ b/drivers/mtd/maps/sl2312_flashmap.h.8MB
-@@ -0,0 +1,21 @@
-+/*
-+ * Please note that the name are used in mkflash script. Therefore
-+ * don't change them.  If you want to add different partitions, you
-+ * will need to modify mkflash script as well so that the end image
-+ * is what you include here!
-+ *
-+ * Also, the 7th item is always the size, so please don't add extra
-+ * spaces in the name or other items.
-+ *
-+ *  - Alan
-+ */
-+
-+static struct mtd_partition sl2312_partitions[] = {
-+	{ name: "RedBoot", 	 offset: 0x00000000, size: 0x00020000, },
-+	{ name: "Kernel", 	 offset: 0x00020000, size: 0x00200000, },
-+	{ name: "Ramdisk", 	 offset: 0x00220000, size: 0x00280000, },
-+	{ name: "Application", 	 offset: 0x004A0000, size: 0x00300000, },
-+	{ name: "VCTL", 	 offset: 0x007A0000, size: 0x00020000, },
-+	{ name: "CurConf", 	 offset: 0x007C0000, size: 0x00020000, },
-+	{ name: "FIS directory", offset: 0x007E0000, size: 0x00020000, }
-+};
---- a/drivers/mtd/mtdchar.c
-+++ b/drivers/mtd/mtdchar.c
-@@ -59,6 +59,77 @@
- 	enum mtd_file_modes mode;
- };
- 
-+/***********************************************************************
-+/*             Storlink SoC -- flash
-+/***********************************************************************/
-+#ifdef CONFIG_SL2312_SHARE_PIN
-+unsigned int share_pin_flag=0;		// bit0:FLASH, bit1:UART, bit2:EMAC, bit3-4:IDE
-+unsigned int check_sleep_flag=0;	// bit0:FLASH, bit1:IDE
-+static spinlock_t sl2312_flash_lock = SPIN_LOCK_UNLOCKED;
-+EXPORT_SYMBOL(share_pin_flag);
-+int dbg=0;
-+DECLARE_WAIT_QUEUE_HEAD(wq);
-+extern struct wait_queue_head_t *flash_wait;
-+unsigned int flash_req=0;
-+void mtd_lock()
-+{
-+	struct task_struct *tsk = current;
-+	unsigned int value ;
-+	unsigned long flags;
-+	flash_req = 1;
-+	DECLARE_WAITQUEUE(wait, tsk);
-+	add_wait_queue(&wq, &wait);
-+	for(;;)
-+	{
-+		set_task_state(tsk, TASK_INTERRUPTIBLE);
-+		spin_lock_irqsave(&sl2312_flash_lock,flags);
-+		if((share_pin_flag&0x1E)){//||(check_sleep_flag&0x00000002)) {
-+			spin_unlock_irqrestore(&sl2312_flash_lock, flags);
-+			check_sleep_flag |= 0x00000001;
-+			if(dbg)
-+				printk("mtd yield %x %x\n",share_pin_flag,check_sleep_flag);
-+			wake_up_interruptible(&flash_wait);
-+			schedule();
-+		}
-+		else {
-+			check_sleep_flag &= ~0x01;
-+			share_pin_flag |= 0x00000001 ;			// set share pin flag
-+			spin_unlock_irqrestore(&sl2312_flash_lock, flags);
-+			value = readl(IO_ADDRESS((SL2312_GLOBAL_BASE+GLOBAL_MISC_REG)));
-+			value = value & (~PFLASH_SHARE_BIT) ;
-+			writel(value,IO_ADDRESS((SL2312_GLOBAL_BASE+GLOBAL_MISC_REG)));
-+			if(dbg)
-+				printk("mtd Go %x %x\n",share_pin_flag,check_sleep_flag);
-+			tsk->state = TASK_RUNNING;
-+			remove_wait_queue(&wq, &wait);
-+			return ;
-+		}
-+	}
-+}
-+
-+void mtd_unlock()
-+{
-+	unsigned int value ;
-+	unsigned long flags;
-+
-+	spin_lock_irqsave(&sl2312_flash_lock,flags);		// Disable IRQ
-+	value = readl(IO_ADDRESS((SL2312_GLOBAL_BASE+GLOBAL_MISC_REG)));
-+	value = value | PFLASH_SHARE_BIT ;				// Disable Flash PADs
-+	writel(value,IO_ADDRESS((SL2312_GLOBAL_BASE+GLOBAL_MISC_REG)));
-+	share_pin_flag &= ~(0x00000001);			// clear share pin flag
-+	check_sleep_flag &= ~0x00000001;
-+	spin_unlock_irqrestore(&sl2312_flash_lock, flags);	// Restore IRQ
-+	if (check_sleep_flag & 0x00000002)
-+	{
-+		check_sleep_flag &= ~(0x00000002);
-+		wake_up_interruptible(&flash_wait);
-+	}
-+	DEBUG(MTD_DEBUG_LEVEL0, "Flash Unlock...\n");
-+	flash_req = 0;
-+}
-+#endif
-+/***********************************************************************/
-+
- static loff_t mtd_lseek (struct file *file, loff_t offset, int orig)
- {
- 	struct mtd_file_info *mfi = file->private_data;
-@@ -162,13 +233,21 @@
- 	int len;
- 	char *kbuf;
- 
-+#ifdef CONFIG_SL2312_SHARE_PIN
-+	mtd_lock();				// sl2312 share pin lock
-+#endif
-+
- 	DEBUG(MTD_DEBUG_LEVEL0,"MTD_read\n");
- 
- 	if (*ppos + count > mtd->size)
- 		count = mtd->size - *ppos;
- 
--	if (!count)
-+	if (!count){
-+#ifdef CONFIG_SL2312_SHARE_PIN
-+	mtd_unlock();				// sl2312 share pin lock
-+#endif
- 		return 0;
-+	}
- 
- 	/* FIXME: Use kiovec in 2.5 to lock down the user's buffers
- 	   and pass them directly to the MTD functions */
-@@ -178,8 +257,12 @@
- 	else
- 		kbuf=kmalloc(count, GFP_KERNEL);
- 
--	if (!kbuf)
-+	if (!kbuf) {
-+#ifdef CONFIG_SL2312_SHARE_PIN
-+	mtd_unlock();				// sl2312 share pin lock
-+#endif
- 		return -ENOMEM;
-+	}
- 
- 	while (count) {
- 
-@@ -224,6 +307,9 @@
- 			*ppos += retlen;
- 			if (copy_to_user(buf, kbuf, retlen)) {
- 				kfree(kbuf);
-+#ifdef CONFIG_SL2312_SHARE_PIN
-+				mtd_unlock();				// sl2312 share pin lock
-+#endif
- 				return -EFAULT;
- 			}
- 			else
-@@ -235,13 +321,19 @@
- 				count = 0;
- 		}
- 		else {
--			kfree(kbuf);
-+	 		kfree(kbuf);
-+#ifdef CONFIG_SL2312_SHARE_PIN
-+			mtd_unlock();				// sl2312 share pin lock
-+#endif
- 			return ret;
- 		}
- 
- 	}
- 
- 	kfree(kbuf);
-+#ifdef CONFIG_SL2312_SHARE_PIN
-+	mtd_unlock();				// sl2312 share pin lock
-+#endif
- 	return total_retlen;
- } /* mtd_read */
- 
-@@ -255,24 +347,40 @@
- 	int ret=0;
- 	int len;
- 
-+#ifdef CONFIG_SL2312_SHARE_PIN
-+	mtd_lock();				// sl2312 share pin lock
-+#endif
-+
- 	DEBUG(MTD_DEBUG_LEVEL0,"MTD_write\n");
- 
--	if (*ppos == mtd->size)
-+	if (*ppos == mtd->size){
-+#ifdef CONFIG_SL2312_SHARE_PIN
-+	mtd_unlock();				// sl2312 share pin lock
-+#endif
- 		return -ENOSPC;
-+	}
- 
- 	if (*ppos + count > mtd->size)
- 		count = mtd->size - *ppos;
- 
--	if (!count)
-+	if (!count){
-+#ifdef CONFIG_SL2312_SHARE_PIN
-+	mtd_unlock();				// sl2312 share pin lock
-+#endif
- 		return 0;
-+	}
- 
- 	if (count > MAX_KMALLOC_SIZE)
- 		kbuf=kmalloc(MAX_KMALLOC_SIZE, GFP_KERNEL);
- 	else
- 		kbuf=kmalloc(count, GFP_KERNEL);
- 
--	if (!kbuf)
-+	if (!kbuf) {
-+#ifdef CONFIG_SL2312_SHARE_PIN
-+		mtd_unlock();				// sl2312 share pin lock
-+#endif
- 		return -ENOMEM;
-+	}
- 
- 	while (count) {
- 
-@@ -283,6 +391,9 @@
- 
- 		if (copy_from_user(kbuf, buf, len)) {
- 			kfree(kbuf);
-+#ifdef CONFIG_SL2312_SHARE_PIN
-+			mtd_unlock();				// sl2312 share pin lock
-+#endif
- 			return -EFAULT;
- 		}
- 
-@@ -323,11 +434,17 @@
- 		}
- 		else {
- 			kfree(kbuf);
-+#ifdef CONFIG_SL2312_SHARE_PIN
-+			mtd_unlock();				// sl2312 share pin lock
-+#endif
- 			return ret;
- 		}
- 	}
- 
- 	kfree(kbuf);
-+#ifdef CONFIG_SL2312_SHARE_PIN
-+	mtd_unlock();				// sl2312 share pin lock
-+#endif
- 	return total_retlen;
- } /* mtd_write */
- 
-@@ -381,36 +498,67 @@
- 	u_long size;
- 	struct mtd_info_user info;
- 
-+#ifdef CONFIG_SL2312_SHARE_PIN
-+	mtd_lock();				// sl2312 share pin lock
-+#endif
-+
- 	DEBUG(MTD_DEBUG_LEVEL0, "MTD_ioctl\n");
- 
- 	size = (cmd & IOCSIZE_MASK) >> IOCSIZE_SHIFT;
- 	if (cmd & IOC_IN) {
- 		if (!access_ok(VERIFY_READ, argp, size))
-+		{
-+#ifdef CONFIG_SL2312_SHARE_PIN
-+			mtd_unlock();				// sl2312 share pin lock
-+#endif
- 			return -EFAULT;
-+		}
- 	}
- 	if (cmd & IOC_OUT) {
- 		if (!access_ok(VERIFY_WRITE, argp, size))
-+		{
-+#ifdef CONFIG_SL2312_SHARE_PIN
-+			mtd_unlock();				// sl2312 share pin lock
-+#endif
- 			return -EFAULT;
-+		}
- 	}
- 
- 	switch (cmd) {
- 	case MEMGETREGIONCOUNT:
- 		if (copy_to_user(argp, &(mtd->numeraseregions), sizeof(int)))
-+		{
-+#ifdef CONFIG_SL2312_SHARE_PIN
-+			mtd_unlock();				// sl2312 share pin lock
-+#endif
- 			return -EFAULT;
-+		}
- 		break;
- 
- 	case MEMGETREGIONINFO:
- 	{
- 		struct region_info_user ur;
- 
--		if (copy_from_user(&ur, argp, sizeof(struct region_info_user)))
-+		if (copy_from_user(&ur, argp, sizeof(struct region_info_user))) {
-+#ifdef CONFIG_SL2312_SHARE_PIN
-+			mtd_unlock();				// sl2312 share pin lock
-+#endif
- 			return -EFAULT;
-+		}
- 
--		if (ur.regionindex >= mtd->numeraseregions)
-+		if (ur.regionindex >= mtd->numeraseregions) {
-+#ifdef CONFIG_SL2312_SHARE_PIN
-+			mtd_unlock();				// sl2312 share pin lock
-+#endif
- 			return -EINVAL;
-+		}
- 		if (copy_to_user(argp, &(mtd->eraseregions[ur.regionindex]),
--				sizeof(struct mtd_erase_region_info)))
-+				sizeof(struct mtd_erase_region_info))) {
-+#ifdef CONFIG_SL2312_SHARE_PIN
-+			mtd_unlock();				// sl2312 share pin lock
-+#endif
- 			return -EFAULT;
-+		}
- 		break;
- 	}
- 
-@@ -433,7 +581,12 @@
- 		struct erase_info *erase;
- 
- 		if(!(file->f_mode & 2))
-+		{
-+#ifdef CONFIG_SL2312_SHARE_PIN
-+			mtd_unlock();				// sl2312 share pin lock
-+#endif
- 			return -EPERM;
-+		}
- 
- 		erase=kzalloc(sizeof(struct erase_info),GFP_KERNEL);
- 		if (!erase)
-@@ -447,6 +600,9 @@
- 			if (copy_from_user(&erase->addr, argp,
- 				    sizeof(struct erase_info_user))) {
- 				kfree(erase);
-+#ifdef CONFIG_SL2312_SHARE_PIN
-+				mtd_unlock();				// sl2312 share pin lock
-+#endif
- 				return -EFAULT;
- 			}
- 			erase->mtd = mtd;
-@@ -484,14 +640,26 @@
- 		struct mtd_oob_buf buf;
- 		struct mtd_oob_ops ops;
- 
--		if(!(file->f_mode & 2))
-+		if(!(file->f_mode & 2)) {
-+#ifdef CONFIG_SL2312_SHARE_PIN
-+			mtd_unlock();				// sl2312 share pin lock
-+#endif
- 			return -EPERM;
-+		}
- 
--		if (copy_from_user(&buf, argp, sizeof(struct mtd_oob_buf)))
-+		if (copy_from_user(&buf, argp, sizeof(struct mtd_oob_buf))) {
-+#ifdef CONFIG_SL2312_SHARE_PIN
-+			mtd_unlock();				// sl2312 share pin lock
-+#endif
- 			return -EFAULT;
-+		}
- 
--		if (buf.length > 4096)
-+		if (buf.length > 4096) {
-+#ifdef CONFIG_SL2312_SHARE_PIN
-+			mtd_unlock();				// sl2312 share pin lock
-+#endif
- 			return -EINVAL;
-+		}
- 
- 		if (!mtd->write_oob)
- 			ret = -EOPNOTSUPP;
-@@ -499,8 +667,12 @@
- 			ret = access_ok(VERIFY_READ, buf.ptr,
- 					buf.length) ? 0 : EFAULT;
- 
--		if (ret)
-+		if (ret) {
-+#ifdef CONFIG_SL2312_SHARE_PIN
-+			mtd_unlock();				// sl2312 share pin lock
-+#endif
- 			return ret;
-+		}
- 
- 		ops.ooblen = buf.length;
- 		ops.ooboffs = buf.start & (mtd->oobsize - 1);
-@@ -536,19 +708,35 @@
- 		struct mtd_oob_buf buf;
- 		struct mtd_oob_ops ops;
- 
--		if (copy_from_user(&buf, argp, sizeof(struct mtd_oob_buf)))
-+		if (copy_from_user(&buf, argp, sizeof(struct mtd_oob_buf))) {
-+#ifdef CONFIG_SL2312_SHARE_PIN
-+			mtd_unlock();				// sl2312 share pin lock
-+#endif
- 			return -EFAULT;
-+		}
- 
--		if (buf.length > 4096)
-+		if (buf.length > 4096) {
-+#ifdef CONFIG_SL2312_SHARE_PIN
-+			mtd_unlock();				// sl2312 share pin lock
-+#endif
- 			return -EINVAL;
-+		}
- 
--		if (!mtd->read_oob)
-+		if (!mtd->read_oob) {
-+#ifdef CONFIG_SL2312_SHARE_PIN
-+			mtd_unlock();				// sl2312 share pin lock
-+#endif
- 			ret = -EOPNOTSUPP;
-+		}
- 		else
- 			ret = access_ok(VERIFY_WRITE, buf.ptr,
- 					buf.length) ? 0 : -EFAULT;
--		if (ret)
-+		if (ret) {
-+#ifdef CONFIG_SL2312_SHARE_PIN
-+			mtd_unlock();				// sl2312 share pin lock
-+#endif
- 			return ret;
-+		}
- 
- 		ops.ooblen = buf.length;
- 		ops.ooboffs = buf.start & (mtd->oobsize - 1);
-@@ -580,7 +768,12 @@
- 		struct erase_info_user info;
- 
- 		if (copy_from_user(&info, argp, sizeof(info)))
-+		{
-+#ifdef CONFIG_SL2312_SHARE_PIN
-+			mtd_unlock();				// sl2312 share pin lock
-+#endif
- 			return -EFAULT;
-+		}
- 
- 		if (!mtd->lock)
- 			ret = -EOPNOTSUPP;
-@@ -594,7 +787,12 @@
- 		struct erase_info_user info;
- 
- 		if (copy_from_user(&info, argp, sizeof(info)))
-+		{
-+#ifdef CONFIG_SL2312_SHARE_PIN
-+			mtd_unlock();				// sl2312 share pin lock
-+#endif
- 			return -EFAULT;
-+		}
- 
- 		if (!mtd->unlock)
- 			ret = -EOPNOTSUPP;
-@@ -629,11 +827,21 @@
- 		loff_t offs;
- 
- 		if (copy_from_user(&offs, argp, sizeof(loff_t)))
-+		{
-+#ifdef CONFIG_SL2312_SHARE_PIN
-+			mtd_unlock();				// sl2312 share pin lock
-+#endif
- 			return -EFAULT;
-+		}
- 		if (!mtd->block_isbad)
- 			ret = -EOPNOTSUPP;
- 		else
-+		{
-+#ifdef CONFIG_SL2312_SHARE_PIN
-+			mtd_unlock();				// sl2312 share pin lock
-+#endif
- 			return mtd->block_isbad(mtd, offs);
-+		}
- 		break;
- 	}
- 
-@@ -642,11 +850,21 @@
- 		loff_t offs;
- 
- 		if (copy_from_user(&offs, argp, sizeof(loff_t)))
-+		{
-+#ifdef CONFIG_SL2312_SHARE_PIN
-+			mtd_unlock();				// sl2312 share pin lock
-+#endif
- 			return -EFAULT;
-+		}
- 		if (!mtd->block_markbad)
- 			ret = -EOPNOTSUPP;
- 		else
-+		{
-+#ifdef CONFIG_SL2312_SHARE_PIN
-+			mtd_unlock();				// sl2312 share pin lock
-+#endif
- 			return mtd->block_markbad(mtd, offs);
-+		}
- 		break;
- 	}
- 
-@@ -654,8 +872,12 @@
- 	case OTPSELECT:
- 	{
- 		int mode;
--		if (copy_from_user(&mode, argp, sizeof(int)))
-+		if (copy_from_user(&mode, argp, sizeof(int))) {
-+#ifdef CONFIG_SL2312_SHARE_PIN
-+			mtd_unlock();				// sl2312 share pin lock
-+#endif
- 			return -EFAULT;
-+		}
- 
- 		mfi->mode = MTD_MODE_NORMAL;
- 
-@@ -670,7 +892,12 @@
- 	{
- 		struct otp_info *buf = kmalloc(4096, GFP_KERNEL);
- 		if (!buf)
-+		{
-+#ifdef CONFIG_SL2312_SHARE_PIN
-+			mtd_unlock();				// sl2312 share pin lock
-+#endif
- 			return -ENOMEM;
-+		}
- 		ret = -EOPNOTSUPP;
- 		switch (mfi->mode) {
- 		case MTD_MODE_OTP_FACTORY:
-@@ -701,12 +928,24 @@
- 	{
- 		struct otp_info info;
- 
--		if (mfi->mode != MTD_MODE_OTP_USER)
-+		if (mfi->mode != MTD_MODE_OTP_USER) {
-+#ifdef CONFIG_SL2312_SHARE_PIN
-+			mtd_unlock();				// sl2312 share pin lock
-+#endif
- 			return -EINVAL;
--		if (copy_from_user(&info, argp, sizeof(info)))
-+		}
-+		if (copy_from_user(&info, argp, sizeof(info))) {
-+#ifdef CONFIG_SL2312_SHARE_PIN
-+			mtd_unlock();				// sl2312 share pin lock
-+#endif
- 			return -EFAULT;
--		if (!mtd->lock_user_prot_reg)
-+		}
-+		if (!mtd->lock_user_prot_reg) {
-+#ifdef CONFIG_SL2312_SHARE_PIN
-+			mtd_unlock();				// sl2312 share pin lock
-+#endif
- 			return -EOPNOTSUPP;
-+		}
- 		ret = mtd->lock_user_prot_reg(mtd, info.start, info.length);
- 		break;
- 	}
-@@ -742,8 +981,12 @@
- 			break;
- 
- 		case MTD_MODE_RAW:
--			if (!mtd->read_oob || !mtd->write_oob)
-+			if (!mtd->read_oob || !mtd->write_oob) {
-+#ifdef CONFIG_SL2312_SHARE_PIN
-+				mtd_unlock();				// sl2312 share pin lock
-+#endif
- 				return -EOPNOTSUPP;
-+			}
- 			mfi->mode = arg;
- 
- 		case MTD_MODE_NORMAL:
-@@ -766,6 +1009,10 @@
- 		ret = -ENOTTY;
- 	}
- 
-+#ifdef CONFIG_SL2312_SHARE_PIN
-+	mtd_unlock();				// sl2312 share pin lock
-+#endif
-+
- 	return ret;
- } /* memory_ioctl */
- 
---- a/drivers/mtd/nand/Kconfig
-+++ b/drivers/mtd/nand/Kconfig
-@@ -44,6 +44,13 @@
- 	  This enables the driver for the autronix autcpu12 board to
- 	  access the SmartMediaCard.
- 
-+config MTD_NAND_SL2312
-+	tristate "NAND Flash device on Storlink board"
-+	depends on ARM && MTD_NAND && ARCH_SL2312
-+	help
-+	  This enables the driver for the Storlink board to
-+	  access the nand device.
-+
- config MTD_NAND_EDB7312
- 	tristate "Support for Cirrus Logic EBD7312 evaluation board"
- 	depends on ARCH_EDB7312
---- /dev/null
-+++ b/drivers/mtd/nand/sl2312-flash-nand.c
-@@ -0,0 +1,2287 @@
-+/*
-+ *  drivers/mtd/sl2312.c
-+ *
-+ * $Id: sl2312-flash-nand.c,v 1.5 2006/06/15 07:02:29 middle Exp $
-+ *
-+ * Copyright (C) 2001 Toshiba Corporation
-+ *
-+ * 2003 (c) MontaVista Software, Inc. This file is licensed under
-+ * the terms of the GNU General Public License version 2. This program
-+ * is licensed "as is" without any warranty of any kind, whether express
-+ * or implied.
-+ *
-+ */
-+
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include "sl2312-flash-nand.h"
-+
-+
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+
-+
-+/*
-+ * NAND low-level MTD interface functions
-+ */
-+static void sl2312_nand_write_buf(struct mtd_info *mtd, const u_char *buf, int len);
-+static void sl2312_nand_read_buf(struct mtd_info *mtd, u_char *buf, int len);
-+static int sl2312_nand_verify_buf(struct mtd_info *mtd, const u_char *buf, int len);
-+
-+static int sl2312_nand_read (struct mtd_info *mtd, loff_t from, size_t len, size_t * retlen, u_char * buf);
-+static int sl2312_nand_read_ecc (struct mtd_info *mtd, loff_t from, size_t len, size_t * retlen, u_char * buf, u_char * eccbuf, struct nand_oobinfo *oobsel);
-+static int sl2312_nand_read_oob (struct mtd_info *mtd, loff_t from, size_t len, size_t * retlen, u_char * buf);
-+static int sl2312_nand_write (struct mtd_info *mtd, loff_t to, size_t len, size_t * retlen, const u_char * buf);
-+static int sl2312_nand_write_ecc (struct mtd_info *mtd, loff_t to, size_t len,
-+			   size_t * retlen, const u_char * buf, u_char * eccbuf, struct nand_oobinfo *oobsel);
-+static int sl2312_nand_write_oob (struct mtd_info *mtd, loff_t to, size_t len, size_t * retlen, const u_char *buf);
-+static int sl2312_nand_writev (struct mtd_info *mtd, const struct kvec *vecs,
-+			unsigned long count, loff_t to, size_t * retlen);
-+static int sl2312_nand_writev_ecc (struct mtd_info *mtd, const struct kvec *vecs,
-+			unsigned long count, loff_t to, size_t * retlen, u_char *eccbuf, struct nand_oobinfo *oobsel);
-+static int sl2312_nand_erase (struct mtd_info *mtd, struct erase_info *instr, int allowbbt);
-+static void sl2312_nand_sync (struct mtd_info *mtd);
-+static int sl2312_nand_write_page (struct mtd_info *mtd, struct nand_chip *this, int page, u_char *oob_buf,  struct nand_oobinfo *oobsel);
-+static int sl2312_nand_block_checkbad (struct mtd_info *mtd, loff_t ofs, int getchip, int allowbbt);
-+static int sl2312_nand_erase_block(struct mtd_info *mtd, int page);
-+
-+/*
-+ * MTD structure for sl2312 NDFMC
-+ */
-+static struct mtd_info *sl2312_mtd = NULL;
-+static int nand_page=0,nand_col=0;
-+
-+/* Define default oob placement schemes for large and small page devices */
-+static struct nand_oobinfo nand_oob_8 = {
-+	.useecc = MTD_NANDECC_AUTOPLACE,
-+	.eccbytes = 3,
-+	.eccpos = {0, 1, 2},
-+	.oobfree = { {3, 2}, {6, 2} }
-+};
-+
-+static struct nand_oobinfo nand_oob_16 = {
-+	.useecc = MTD_NANDECC_AUTOPLACE,
-+	.eccbytes = 6,
-+	.eccpos = {0, 1, 2, 3, 6, 7},
-+	.oobfree = { {8, 8} }
-+};
-+
-+static struct nand_oobinfo nand_oob_64 = {
-+	.useecc = MTD_NANDECC_AUTOPLACE,
-+	.eccbytes = 24,
-+	.eccpos = {
-+		40, 41, 42, 43, 44, 45, 46, 47,
-+		48, 49, 50, 51, 52, 53, 54, 55,
-+		56, 57, 58, 59, 60, 61, 62, 63},
-+	.oobfree = { {2, 38} }
-+};
-+
-+
-+/*
-+ * Define partitions for flash device
-+ */
-+/* the base address of FLASH control register */
-+#define FLASH_CONTROL_BASE_ADDR	    (IO_ADDRESS(SL2312_FLASH_CTRL_BASE))
-+#define SL2312_GLOBAL_BASE_ADDR     (IO_ADDRESS(SL2312_GLOBAL_BASE))
-+//#define SL2312_FLASH_BASE_ADDR      (IO_ADDRESS(SL2312_FLASH_BASE))
-+#define SL2312_FLASH_BASE_ADDR       FLASH_VADDR(SL2312_FLASH_BASE)
-+static unsigned int CHIP_EN;
-+/* define read/write register utility */
-+//#define FLASH_READ_REG(offset)			(__raw_readl(offset+FLASH_CONTROL_BASE_ADDR))
-+//#define FLASH_WRITE_REG(offset,val) 	(__raw_writel(val,offset+FLASH_CONTROL_BASE_ADDR))
-+//#define FLASH_READ_DATA(offset)			(__raw_readb(offset+SL2312_FLASH_BASE_ADDR))
-+//#define FLASH_WRITE_DATA(offset,val) 	(__raw_writeb(val,offset+SL2312_FLASH_BASE_ADDR))
-+
-+unsigned int FLASH_READ_REG(unsigned int addr)
-+{
-+    unsigned int *base;
-+    unsigned int data;
-+
-+    base = (unsigned int *)(FLASH_CONTROL_BASE_ADDR + addr);
-+    data = *base;
-+    return (data);
-+}
-+
-+void FLASH_WRITE_REG(unsigned int addr,unsigned int data)
-+{
-+    unsigned int *base;
-+
-+    base = (unsigned int *)(FLASH_CONTROL_BASE_ADDR + addr);
-+    *base = data;
-+    return;
-+}
-+
-+unsigned int FLASH_READ_DATA(unsigned int addr)
-+{
-+    unsigned char *base;
-+    unsigned int data;
-+
-+    base = (unsigned char *)(SL2312_FLASH_BASE_ADDR + addr);
-+    data = *base;
-+    return (data);
-+}
-+
-+void FLASH_WRITE_DATA(unsigned int addr,unsigned int data)
-+{
-+    unsigned char *base;
-+
-+    base = (unsigned char *)(SL2312_FLASH_BASE_ADDR + addr);
-+    *base = data;
-+    return;
-+}
-+
-+/* the offset of FLASH control register */
-+enum NFLASH_REGISTER {
-+	NFLASH_ID     			= 0x0000,
-+	NFLASH_STATUS 			= 0x0008,
-+	NFLASH_TYPE   			= 0x000c,
-+	NFLASH_ACCESS			= 0x0030,
-+	NFLASH_COUNT			= 0x0034,
-+	NFLASH_CMD_ADDR 		= 0x0038,
-+	NFLASH_ADDRESS			= 0x003C,
-+	NFLASH_DATA				= 0x0040,
-+	NFLASH_TIMING   		= 0x004C,
-+	NFLASH_ECC_STATUS		= 0x0050,
-+	NFLASH_ECC_CONTROL		= 0x0054,
-+	NFLASH_ECC_OOB			= 0x005c,
-+	NFLASH_ECC_CODE_GEN0	= 0x0060,
-+	NFLASH_ECC_CODE_GEN1	= 0x0064,
-+	NFLASH_ECC_CODE_GEN2	= 0x0068,
-+	NFLASH_ECC_CODE_GEN3	= 0x006C,
-+	NFLASH_FIFO_CONTROL		= 0x0070,
-+	NFLASH_FIFO_STATUS		= 0x0074,
-+	NFLASH_FIFO_ADDRESS		= 0x0078,
-+	NFLASH_FIFO_DATA		= 0x007c,
-+};
-+
-+
-+
-+//#define FLASH_BASE	FLASH_CONTROL_BASE_ADDR
-+//#define FLASH_SIZE	0x00800000 //INTEGRATOR_FLASH_SIZE
-+
-+//#define FLASH_PART_SIZE 8388608
-+
-+//static unsigned int flash_indirect_access = 0;
-+
-+
-+#ifdef CONFIG_SL2312_SHARE_PIN
-+void sl2312flash_enable_nand_flash(void)
-+{
-+    unsigned int    reg_val;
-+
-+    reg_val = readl(SL2312_GLOBAL_BASE_ADDR + 0x30);
-+    reg_val = reg_val & 0xfffffffb;
-+    writel(reg_val,SL2312_GLOBAL_BASE_ADDR + 0x30);
-+    return;
-+}
-+
-+void sl2312flash_disable_nand_flash(void)
-+{
-+    unsigned int    reg_val;
-+
-+    reg_val = readl(SL2312_GLOBAL_BASE_ADDR + 0x30);
-+    reg_val = reg_val | 0x00000004;
-+    writel(reg_val,SL2312_GLOBAL_BASE_ADDR + 0x30);
-+    return;
-+}
-+#endif
-+
-+extern struct nand_oobinfo jffs2_oobinfo;
-+/*
-+ * Define partitions for flash devices
-+ */
-+
-+static struct mtd_partition sl2312_partitions[] = {
-+	{ name: "RedBoot", offset: 0x00000000, size: 0x0020000, },
-+	{ name: "Kernel", offset: 0x00020000, size: 0x00200000, },
-+	{ name: "Ramdisk", offset: 0x00220000, size: 0x00280000, },
-+	{ name: "Application", offset: 0x004A0000, size: 0x00320000, },
-+	{ name: "VCTL", offset: 0x007C0000, size: 0x20000, },
-+	{ name: "CurConf", offset: 0x007E0000, size: 0x20000, },
-+	{ name: "FIS directory", offset: 0x007e0000, size: 0x00020000, }
-+
-+};
-+
-+
-+/*
-+ *	hardware specific access to control-lines
-+*/
-+static void sl2312_hwcontrol(struct mtd_info *mtd, int cmd)
-+{
-+
-+	return ;
-+}
-+
-+static int sl2312_nand_scan_bbt(struct mtd_info *mtd)
-+{
-+	return 0;
-+}
-+
-+/**
-+ * nand_block_isbad - [MTD Interface] Check whether the block at the given offset is bad
-+ * @mtd:	MTD device structure
-+ * @ofs:	offset relative to mtd start
-+ */
-+static int sl2312_nand_block_isbad (struct mtd_info *mtd, loff_t ofs)
-+{
-+	/* Check for invalid offset */
-+	if (ofs > mtd->size)
-+		return -EINVAL;
-+
-+	return sl2312_nand_block_checkbad (mtd, ofs, 1, 0);
-+}
-+
-+/**
-+ * nand_block_checkbad - [GENERIC] Check if a block is marked bad
-+ * @mtd:	MTD device structure
-+ * @ofs:	offset from device start
-+ * @getchip:	0, if the chip is already selected
-+ * @allowbbt:	1, if its allowed to access the bbt area
-+ *
-+ * Check, if the block is bad. Either by reading the bad block table or
-+ * calling of the scan function.
-+ */
-+
-+static int sl2312_nand_erase_block(struct mtd_info *mtd, int page)
-+{
-+	int opcode;
-+	/* Send commands to erase a page */
-+		FLASH_WRITE_REG(NFLASH_ECC_CONTROL, 0x00000000); //set 31b = 0
-+
-+		if(mtd->oobblock > 528)
-+		    FLASH_WRITE_REG(NFLASH_COUNT, 0x7f0fff21);  // 3 address & 2 command
-+		else
-+		    FLASH_WRITE_REG(NFLASH_COUNT, 0x7f0fff11);  // 2 address & 2 command
-+
-+		FLASH_WRITE_REG(NFLASH_CMD_ADDR, 0x0000d060); // write read id command
-+		FLASH_WRITE_REG(NFLASH_ADDRESS, page); //write address 0x00
-+
-+
-+
-+		/* read maker code */
-+		opcode = 0x80003000|DWIDTH|CHIP_EN; //set start bit & 8bits write command
-+		FLASH_WRITE_REG(NFLASH_ACCESS, opcode);
-+
-+		while(opcode&0x80000000) //polling flash access 31b
-+      	{
-+           opcode=FLASH_READ_REG(NFLASH_ACCESS);
-+           //sl2312_flash_delay();
-+           schedule();
-+           //cond_resched();
-+      	}
-+}
-+
-+void sl2312_flash_delay(void)
-+{
-+      int i;
-+
-+      for(i=0; i<50; i++)
-+           i=i;
-+}
-+
-+static int sl2312_nand_block_checkbad (struct mtd_info *mtd, loff_t ofs, int getchip, int allowbbt)
-+{
-+	struct nand_chip *this = mtd->priv;
-+
-+	if (!this->bbt)
-+		return this->block_bad(mtd, ofs, getchip);
-+
-+	/* Return info from the table */
-+	return nand_isbad_bbt (mtd, ofs, allowbbt);
-+}
-+
-+/**
-+ * nand_block_markbad - [MTD Interface] Mark the block at the given offset as bad
-+ * @mtd:	MTD device structure
-+ * @ofs:	offset relative to mtd start
-+ */
-+static int sl2312_nand_block_markbad (struct mtd_info *mtd, loff_t ofs)
-+{
-+	struct nand_chip *this = mtd->priv;
-+	int ret;
-+
-+        if ((ret = sl2312_nand_block_isbad(mtd, ofs))) {
-+        	/* If it was bad already, return success and do nothing. */
-+		if (ret > 0)
-+			return 0;
-+        	return ret;
-+        }
-+
-+	return this->block_markbad(mtd, ofs);
-+}
-+
-+/*
-+ *	Get chip for selected access
-+ */
-+static inline void sl2312_nand_get_chip (struct nand_chip *this, struct mtd_info *mtd, int new_state, int *erase_state)
-+{
-+
-+	DECLARE_WAITQUEUE (wait, current);
-+
-+	/*
-+	 * Grab the lock and see if the device is available
-+	 * For erasing, we keep the spinlock until the
-+	 * erase command is written.
-+	*/
-+retry:
-+	spin_lock_bh (&this->chip_lock);
-+
-+	if (this->state == FL_READY) {
-+		this->state = new_state;
-+		if (new_state != FL_ERASING)
-+			spin_unlock_bh (&this->chip_lock);
-+		return;
-+	}
-+
-+	if (this->state == FL_ERASING) {
-+		if (new_state != FL_ERASING) {
-+			this->state = new_state;
-+			spin_unlock_bh (&this->chip_lock);
-+			this->select_chip(mtd, 0);	/* select in any case */
-+			this->cmdfunc(mtd, NAND_CMD_RESET, -1, -1);
-+			return;
-+		}
-+	}
-+
-+	set_current_state (TASK_UNINTERRUPTIBLE);
-+	add_wait_queue (&this->wq, &wait);
-+	spin_unlock_bh (&this->chip_lock);
-+	schedule ();
-+	remove_wait_queue (&this->wq, &wait);
-+	goto retry;
-+}
-+
-+/*
-+*	read device ready pin
-+*/
-+static int sl2312_device_ready(struct mtd_info *mtd)
-+{
-+	int ready;
-+
-+	FLASH_WRITE_REG(NFLASH_ECC_CONTROL, 0x00000000); //set 31b = 0
-+	FLASH_WRITE_REG(NFLASH_COUNT, 0x7f000070); //set only command no address and two data
-+
-+	FLASH_WRITE_REG(NFLASH_CMD_ADDR, 0x00000070); //write read status command
-+
-+
-+	ready = 0x80002000|DWIDTH|CHIP_EN; //set start bit & 8bits read command
-+	FLASH_WRITE_REG(NFLASH_ACCESS, ready);
-+
-+	while(ready&0x80000000) //polling flash access 31b
-+    {
-+        ready=FLASH_READ_REG(NFLASH_ACCESS);
-+        //sl2312_flash_delay();
-+		schedule();
-+    }
-+    FLASH_WRITE_REG(NFLASH_ACCESS, NFLASH_DIRECT);
-+      	ready=FLASH_READ_REG(NFLASH_DATA)&0xff;
-+	return ready;
-+}
-+void sl2312_enable_hwecc(struct mtd_info *mtd, int mode)
-+{
-+	/* reset first */
-+	FLASH_WRITE_REG(NFLASH_ECC_CONTROL, 0x80000001); //set 31b = 0
-+
-+}
-+
-+
-+void sl2312_device_setup(void)
-+{
-+
-+}
-+static u_char sl2312_nand_read_byte(struct mtd_info *mtd)
-+{
-+
-+        unsigned int    data=0, page=0, col=0, tmp, i;
-+
-+        printk ("**************************sl2312_nand_read_byte !! \n");
-+        //page = FLASH_READ_REG(NFLASH_ADDRESS)&0xffffff00;
-+        //col  = FLASH_READ_REG(NFLASH_ADDRESS)&0x000000ff;
-+        page = nand_page;
-+        col  = nand_col;
-+        for(i=0;i<(mtd->oobblock+mtd->oobsize);i++)
-+        {
-+        	if(i==col)
-+				data = FLASH_READ_DATA(page*mtd->oobblock +i);
-+			else
-+				tmp = FLASH_READ_DATA(page*mtd->oobblock +i);
-+        }
-+        return data&0xff;
-+}
-+
-+static void sl2312_nand_write_byte(struct mtd_info *mtd, u_char byte)
-+{
-+        //struct nand_chip *this = mtd->priv;
-+        unsigned int    page=0, col=0, i;
-+        u_char *databuf,oobbuf[mtd->oobsize];
-+        size_t  retlen;
-+        retlen=0;
-+		printk ("********************sl2312_nand_write_byte !! \n");
-+		page = nand_page;
-+        col  = nand_col;
-+		databuf = kmalloc (mtd->oobsize+mtd->oobblock,GFP_KERNEL);
-+
-+		if (!databuf) {
-+			printk ("sl2312_nand_write_byte : Unable to allocate SL2312 NAND MTD device structure.\n");
-+
-+		}
-+
-+		 for(i=0;i<(mtd->oobblock+mtd->oobsize);i++)
-+           	databuf[i] = FLASH_READ_DATA(page*mtd->oobblock +i);
-+
-+        databuf[col] = byte;
-+        sl2312_nand_write_ecc (mtd, page, mtd->oobblock, &retlen, databuf, oobbuf, NULL);
-+
-+}
-+
-+static void sl2312_nand_write_buf(struct mtd_info *mtd, const u_char *buf, int len)
-+{
-+	int i, page=0,col=0;
-+	struct nand_chip *this = mtd->priv;
-+	u_char *databuf, *oobbuf;
-+        size_t  retlen;
-+        retlen=0;
-+
-+
-+		printk ("***********************sl2312_nand_write_buf !! \n");
-+		databuf = &(this->data_buf[0]);
-+		oobbuf = &(this->data_buf[mtd->oobblock]);
-+		for (i = 0; i < mtd->oobsize; i++)
-+			oobbuf[i] = 0xff;
-+
-+	if(len < mtd->oobblock)
-+	{
-+		//addr = FLASH_READ_REG(NFLASH_ADDRESS);
-+		//page = FLASH_READ_REG(NFLASH_ADDRESS)&0xffffff00;
-+		//col  = FLASH_READ_REG(NFLASH_ADDRESS)&0x000000ff;
-+		page = nand_page;
-+        col  = nand_col;
-+
-+		sl2312_nand_read_ecc (mtd, page, mtd->oobblock , &retlen, databuf, oobbuf, NULL);
-+
-+        for(i=col;ioobblock, &retlen, databuf, oobbuf, NULL);
-+
-+	}
-+
-+}
-+
-+static void sl2312_nand_read_buf(struct mtd_info *mtd, u_char *buf, int len)
-+{
-+	int i, page=0,col=0,addr=0,tmp=0;
-+	//struct nand_chip *this = mtd->priv;
-+	printk ("********************sl2312_nand_read_buf !! \n");
-+	if(len < mtd->oobblock)
-+	{
-+		//addr = FLASH_READ_REG(NFLASH_ADDRESS);
-+		//page = FLASH_READ_REG(NFLASH_ADDRESS)&0xffffff00;
-+		//col  = FLASH_READ_REG(NFLASH_ADDRESS)&0x000000ff;
-+		page = nand_page;
-+        col  = nand_col;
-+		for (i=col; i<((mtd->oobblock+mtd->oobsize)-col); i++)
-+		{
-+			if(ipriv;
-+	u_char *datatmp, *oobtmp;
-+	size_t  retlen;
-+	retlen=0;
-+
-+	datatmp = kmalloc (mtd->oobblock,GFP_KERNEL);
-+	oobtmp = kmalloc (mtd->oobsize,GFP_KERNEL);
-+
-+	if ((!datatmp)||(!oobtmp)) {
-+		printk ("sl2312_nand_verify_buf : Unable to allocate SL2312 NAND MTD device structure.\n");
-+
-+	}
-+	//page = nand_page;
-+	for(i=0;ioobblock;i++)
-+		datatmp[i] = FLASH_READ_DATA(nand_page*mtd->oobblock +i);
-+	/* read oobdata */
-+	for (i = 0; i <  mtd->oobsize; i++)
-+		oobtmp[i] = FLASH_READ_DATA(nand_page*mtd->oobblock + mtd->oobblock + i);
-+
-+	if(len==mtd->oobblock)
-+	{
-+		for (i=0; i page: %x, byte: %x \n",nand_page,i);
-+				return i;
-+			}
-+		}
-+	}
-+	else if(len == mtd->oobsize)
-+	{
-+		for (i=0; i page: %x, byte: %x \n",nand_page,i);
-+				return i;
-+			}
-+		}
-+	}
-+	else
-+	{
-+		printk (KERN_WARNING "sl2312_nand_verify_buf : verify length not match 0x%08x\n", len);
-+		kfree(datatmp);
-+		kfree(oobtmp);
-+		return -1;
-+	}
-+
-+	kfree(datatmp);
-+	kfree(oobtmp);
-+	return 0;
-+}
-+
-+/*
-+ * Send command to NAND device
-+ */
-+static void sl2312_nand_command (struct mtd_info *mtd, unsigned command, int column, int page_addr)
-+{
-+	register struct nand_chip *this = mtd->priv;
-+	int opcode;
-+
-+
-+	/*
-+	 * program and erase have their own busy handlers
-+	 * status and sequential in needs no delay
-+	*/
-+	switch (command) {
-+
-+	case NAND_CMD_PAGEPROG:
-+	case NAND_CMD_ERASE1:
-+	case NAND_CMD_ERASE2:
-+	case NAND_CMD_SEQIN:
-+	case NAND_CMD_STATUS:
-+	case NAND_CMD_READ0:
-+
-+		/*
-+		 * Write out the command to the device.
-+		 */
-+		if (column != -1 || page_addr != -1) {
-+
-+			/* Serially input address */
-+			if (column != -1)
-+				//FLASH_WRITE_REG(NFLASH_ADDRESS,column);
-+				nand_col=column;
-+
-+			opcode = FLASH_READ_REG(NFLASH_ADDRESS);
-+
-+			if (page_addr != -1)
-+				//FLASH_WRITE_REG(NFLASH_ADDRESS,opcode|(page_addr<<8));
-+				nand_page = page_addr;
-+
-+		}
-+		return;
-+
-+	case NAND_CMD_RESET:
-+		if (this->dev_ready)
-+			break;
-+		FLASH_WRITE_REG(NFLASH_ECC_CONTROL, 0x00000000); //set 31b = 0
-+		FLASH_WRITE_REG(NFLASH_COUNT, 0x7f0fff70); //set only command and no other data
-+		FLASH_WRITE_REG(NFLASH_CMD_ADDR, NAND_CMD_RESET); //write reset command
-+
-+		opcode = 0x80002000|DWIDTH|CHIP_EN; //set start bit & 8bits read command
-+		FLASH_WRITE_REG(NFLASH_ACCESS, opcode);
-+
-+		while(opcode&0x80000000) //polling flash access 31b
-+      	{
-+           opcode=FLASH_READ_REG(NFLASH_ACCESS);
-+           //sl2312_flash_delay();
-+           schedule();
-+      	}
-+		while ( !(sl2312_device_ready(mtd) & 0x40));
-+		{
-+			FLASH_WRITE_REG(NFLASH_ACCESS, NFLASH_DIRECT);
-+			//sl2312_flash_delay();
-+			schedule();
-+			return;
-+		}
-+	/* This applies to read commands */
-+	default:
-+		/*
-+		 * If we don't have access to the busy pin, we apply the given
-+		 * command delay
-+		*/
-+		if (!this->dev_ready) {
-+			udelay (this->chip_delay);
-+			FLASH_WRITE_REG(NFLASH_ACCESS, NFLASH_DIRECT);
-+			return;
-+		}
-+	}
-+
-+	/* wait until command is processed */
-+	while (!this->dev_ready(mtd));
-+
-+}
-+/*Add function*/
-+static void nand_read_id(int chip_no, unsigned char *id)
-+{
-+	unsigned int opcode, i;
-+
-+	if(chip_no==0)
-+		CHIP_EN = NFLASH_CHIP0_EN;
-+	else
-+		CHIP_EN = NFLASH_CHIP1_EN;
-+
-+	opcode = FLASH_READ_REG(NFLASH_TYPE);
-+
-+	FLASH_WRITE_REG(NFLASH_ECC_CONTROL, 0x00000000); //set 31b = 0
-+	if((opcode&0x00000300)<=0x00000100)
-+	    FLASH_WRITE_REG(NFLASH_COUNT, 0x7f000100); //set only command & address and two data
-+	else
-+	    FLASH_WRITE_REG(NFLASH_COUNT, 0x7f000300); //set only command & address and 4 data
-+
-+	FLASH_WRITE_REG(NFLASH_CMD_ADDR, 0x00000090); //write read id command
-+	FLASH_WRITE_REG(NFLASH_ADDRESS, 0x00000000); //write address 0x00
-+
-+	/* read maker code */
-+	opcode = 0x80002000|DWIDTH|CHIP_EN;//|chip0_en; //set start bit & 8bits read command
-+	FLASH_WRITE_REG(NFLASH_ACCESS, opcode);
-+	opcode=FLASH_READ_REG(NFLASH_ACCESS);
-+		while(opcode&0x80000000) //polling flash access 31b
-+      	{
-+           opcode=FLASH_READ_REG(NFLASH_ACCESS);
-+           //sl2312_flash_delay();
-+           schedule();
-+      	}
-+
-+    opcode = FLASH_READ_REG(NFLASH_DATA);
-+    if(DWIDTH==NFLASH_WiDTH16)
-+    {
-+      		id[0] = opcode&0xff;
-+      		id[1] = (opcode&0xff00)>>8;
-+    }
-+    else
-+    {
-+    	    id[0] = opcode&0xff;
-+    	    opcode = 0x80002000|DWIDTH|CHIP_EN;//|chip0_en; //set start bit & 8bits read command
-+			FLASH_WRITE_REG(NFLASH_ACCESS, opcode);
-+			opcode=FLASH_READ_REG(NFLASH_ACCESS);
-+			while(opcode&0x80000000) //polling flash access 31b
-+    	  	{
-+    	       opcode=FLASH_READ_REG(NFLASH_ACCESS);
-+    	       //sl2312_flash_delay();
-+    	       schedule();
-+    	  	}
-+    		opcode = FLASH_READ_REG(NFLASH_DATA);
-+      		id[1] = (opcode&0xff00)>>8;
-+
-+      		opcode=FLASH_READ_REG(NFLASH_TYPE);
-+      		if((opcode&0x300)>0x100)
-+      		{
-+      		    for(i=0;i<2;i++)
-+      		    {
-+      				//data cycle 3 & 4 ->not use
-+      				opcode = 0x80002000|DWIDTH|CHIP_EN;//set start bit & 8bits read command
-+					FLASH_WRITE_REG(NFLASH_ACCESS, opcode);
-+					opcode=FLASH_READ_REG(NFLASH_ACCESS);
-+      				while(opcode&0x80000000) //polling flash access 31b
-+      				{
-+        			   opcode=FLASH_READ_REG(NFLASH_ACCESS);
-+        			   //sl2312_flash_delay();
-+        			   schedule();
-+      				}
-+
-+      				opcode=FLASH_READ_REG(NFLASH_DATA);
-+      				id[2+i] = (opcode&(0xff0000<>(8*(2+i));
-+      		    }
-+      		}
-+    }
-+    FLASH_WRITE_REG(NFLASH_ACCESS, NFLASH_DIRECT);
-+}
-+
-+/*
-+ * NAND erase a block
-+ */
-+static int sl2312_nand_erase (struct mtd_info *mtd, struct erase_info *instr, int allowbbt)
-+{
-+	int page, len, status, pages_per_block, ret, chipnr;
-+	struct nand_chip *this = mtd->priv;
-+
-+	DEBUG (MTD_DEBUG_LEVEL3,
-+	       "nand_erase: start = 0x%08x, len = %i\n", (unsigned int) instr->addr, (unsigned int) instr->len);
-+
-+	/* Start address must align on block boundary */
-+	if (instr->addr & ((1 << this->phys_erase_shift) - 1)) {
-+		DEBUG (MTD_DEBUG_LEVEL0, "nand_erase: Unaligned address\n");
-+		return -EINVAL;
-+	}
-+
-+	/* Length must align on block boundary */
-+	if (instr->len & ((1 << this->phys_erase_shift) - 1)) {
-+		DEBUG (MTD_DEBUG_LEVEL0, "nand_erase: Length not block aligned\n");
-+		return -EINVAL;
-+	}
-+
-+	/* Do not allow erase past end of device */
-+	if ((instr->len + instr->addr) > mtd->size) {
-+		DEBUG (MTD_DEBUG_LEVEL0, "nand_erase: Erase past end of device\n");
-+		return -EINVAL;
-+	}
-+
-+	instr->fail_addr = 0xffffffff;
-+
-+	/* Grab the lock and see if the device is available */
-+	sl2312_nand_get_chip (this, mtd, FL_ERASING, NULL);
-+
-+	/* Shift to get first page */
-+	page = (int) (instr->addr >> this->page_shift);
-+	chipnr = (int) (instr->addr >> this->chip_shift);
-+
-+	/* Calculate pages in each block */
-+	pages_per_block = 1 << (this->phys_erase_shift - this->page_shift);
-+
-+	/* Select the NAND device */
-+	//this->select_chip(mtd, chipnr);
-+	this->select_chip(mtd, 0);
-+
-+	/* Check the WP bit */
-+	/* Check, if it is write protected */
-+	status = sl2312_device_ready(mtd);
-+	if (!(status & 0x80)) {
-+		DEBUG (MTD_DEBUG_LEVEL0, "nand_erase: Device is write protected!!!\n");
-+		instr->state = MTD_ERASE_FAILED;
-+		goto erase_exit;
-+	}
-+
-+	/* Loop through the pages */
-+	len = instr->len;
-+
-+	instr->state = MTD_ERASING;
-+
-+	while (len) {
-+		/* Check if we have a bad block, we do not erase bad blocks ! */
-+		if (this->block_bad(mtd, ((loff_t) page) << this->page_shift, 0)) {
-+			printk (KERN_WARNING "nand_erase: attempt to erase a bad block at page 0x%08x\n", page);
-+			//instr->state = MTD_ERASE_FAILED;
-+			//goto erase_exit;
-+		}
-+
-+		/* Invalidate the page cache, if we erase the block which contains
-+		   the current cached page */
-+		if (page <= this->pagebuf && this->pagebuf < (page + pages_per_block))
-+			this->pagebuf = -1;
-+		/////////
-+
-+		///* Send commands to erase a page */
-+		//FLASH_WRITE_REG(NFLASH_ECC_CONTROL, 0x00000000); //set 31b = 0
-+	    //
-+		//if(mtd->oobblock > 528)
-+		//    FLASH_WRITE_REG(NFLASH_COUNT, 0x7f0fff21);  // 3 address & 2 command
-+		//else
-+		//    FLASH_WRITE_REG(NFLASH_COUNT, 0x7f0fff11);  // 2 address & 2 command
-+		//
-+		//FLASH_WRITE_REG(NFLASH_CMD_ADDR, 0x0000d060); // write read id command
-+		//FLASH_WRITE_REG(NFLASH_ADDRESS, page); //write address 0x00
-+		//
-+		//
-+		//
-+		///* read maker code */
-+		//opcode = 0x80003000|DWIDTH|CHIP_EN; //set start bit & 8bits write command
-+		//FLASH_WRITE_REG(NFLASH_ACCESS, opcode);
-+		//
-+		//while(opcode&0x80000000) //polling flash access 31b
-+      	//{
-+        //   opcode=FLASH_READ_REG(NFLASH_ACCESS);
-+        //   //sl2312_flash_delay();
-+        //   schedule();
-+        //   //cond_resched();
-+      	//}
-+      	sl2312_nand_erase_block(mtd, page);
-+      	//////////////
-+		status = this->waitfunc (mtd, this, FL_ERASING);
-+		/* See if block erase succeeded */
-+		if (status & 0x01) {
-+			DEBUG (MTD_DEBUG_LEVEL0, "nand_erase: " "Failed erase, page 0x%08x\n", page);
-+			instr->state = MTD_ERASE_FAILED;
-+			instr->fail_addr = (page << this->page_shift);
-+			goto erase_exit;
-+		}
-+
-+		/* Increment page address and decrement length */
-+		len -= (1 << this->phys_erase_shift);
-+		page += pages_per_block;
-+
-+		/* Check, if we cross a chip boundary */
-+		if (len && !(page & this->pagemask)) {
-+			chipnr++;
-+			this->select_chip(mtd, 0);
-+			this->select_chip(mtd, 0);
-+		}
-+		//sl2312_flash_delay();
-+           schedule();
-+           //cond_resched();
-+	}
-+	instr->state = MTD_ERASE_DONE;
-+
-+erase_exit:
-+	/* De-select the NAND device */
-+	this->select_chip(mtd, 0);
-+	spin_unlock_bh (&this->chip_lock);
-+
-+	ret = instr->state == MTD_ERASE_DONE ? 0 : -EIO;;
-+	/* Do call back function */
-+	if (!ret && instr->callback)
-+		instr->callback (instr);
-+
-+	/* The device is ready */
-+	spin_lock_bh (&this->chip_lock);
-+	this->state = FL_READY;
-+	spin_unlock_bh (&this->chip_lock);
-+	FLASH_WRITE_REG(NFLASH_ACCESS, NFLASH_DIRECT);
-+	/* Return more or less happy */
-+	return ret;
-+}
-+
-+static void sl2312_nand_select_chip(struct mtd_info *mtd, int chip)
-+{
-+	//struct nand_chip *this = mtd->priv;
-+
-+	switch(chip) {
-+	case -1:
-+		CHIP_EN = NFLASH_CHIP0_EN;
-+		break;
-+	case 0:
-+		CHIP_EN = NFLASH_CHIP0_EN;
-+		break;
-+	case 1:
-+		CHIP_EN = NFLASH_CHIP1_EN;
-+		break;
-+	default:
-+			CHIP_EN = NFLASH_CHIP0_EN;
-+			break;
-+	}
-+}
-+
-+/**
-+ * nand_default_block_markbad - [DEFAULT] mark a block bad
-+ * @mtd:	MTD device structure
-+ * @ofs:	offset from device start
-+ *
-+ * This is the default implementation, which can be overridden by
-+ * a hardware specific driver.
-+*/
-+static int sl2312_nand_default_block_markbad(struct mtd_info *mtd, loff_t ofs)
-+{
-+	struct nand_chip *this = mtd->priv;
-+	u_char buf[2] = {0, 0};
-+	size_t	retlen;
-+	int block;
-+
-+	/* Get block number */
-+	block = ((int) ofs) >> this->bbt_erase_shift;
-+	this->bbt[block >> 2] |= 0x01 << ((block & 0x03) << 1);
-+
-+	/* Do we have a flash based bad block table ? */
-+	if (this->options & NAND_USE_FLASH_BBT)
-+		return nand_update_bbt (mtd, ofs);
-+
-+	/* We write two bytes, so we dont have to mess with 16 bit access */
-+	ofs += mtd->oobsize + (this->badblockpos & ~0x01);
-+	return sl2312_nand_write_oob (mtd, ofs , 2, &retlen, buf);
-+}
-+
-+/* Appropriate chip should already be selected */
-+static int sl2312_nand_block_bad(struct mtd_info *mtd, loff_t ofs, int getchip)//(struct mtd_info *mtd, unsigned long page, )
-+{
-+	u_char *buf, *oobbuf;
-+	size_t  retlen;
-+	unsigned long page, chipnr;
-+	struct nand_chip *this = mtd->priv;
-+
-+	if (getchip) {
-+		page = (int)(ofs >> this->page_shift);
-+		chipnr = (int)(ofs >> this->chip_shift);
-+
-+		/* Grab the lock and see if the device is available */
-+		sl2312_nand_get_chip (this, mtd, FL_READING, NULL);
-+		/* Select the NAND device */
-+		this->select_chip(mtd, chipnr);
-+	} else
-+		page = (int) ofs;
-+
-+	buf = kmalloc (mtd->oobblock,GFP_KERNEL);
-+	oobbuf = kmalloc (mtd->oobsize,GFP_KERNEL);
-+
-+	if ((!buf)||(!oobbuf)) {
-+		printk ("sl2312_nand_block_bad : Unable to allocate SL2312 NAND MTD device structure.\n");
-+
-+	}
-+
-+	sl2312_nand_read_ecc (mtd, page, mtd->oobblock , &retlen, buf, oobbuf, NULL);
-+
-+
-+	if(((mtd->oobblock < 528)&&(oobbuf[5] != 0xff))||((mtd->oobblock > 528)&&(oobbuf[0] != 0xff)))
-+	{
-+		kfree(buf);
-+		kfree(oobbuf);
-+		return 1;
-+	}
-+
-+	kfree(buf);
-+	kfree(oobbuf);
-+	return 0;
-+}
-+
-+/*
-+*	Use NAND read ECC
-+*/
-+static int sl2312_nand_read (struct mtd_info *mtd, loff_t from, size_t len, size_t * retlen, u_char * buf)
-+{
-+	return sl2312_nand_read_ecc (mtd, from, len, retlen, buf, NULL, NULL);
-+}
-+
-+/*
-+ * NAND read with ECC
-+ */
-+static int sl2312_nand_read_ecc (struct mtd_info *mtd, loff_t from, size_t len,
-+			  size_t * retlen, u_char * buf, u_char * oob_buf, struct nand_oobinfo *oobsel)
-+{
-+	int j, col, page, opcode, i;
-+	int end=0;//, ecc=0;//, end_page=0;
-+	int erase_state = 0;
-+	int read = 0, oob = 0, ecc_failed = 0;//, ecc_status = 0
-+	struct nand_chip *this = mtd->priv;
-+	u_char *data_poi, *oob_data = oob_buf;
-+	//u_char ecc_calc[6];
-+	//u_char ecc_code[6];
-+	int 	eccmode;
-+	int	*oob_config;
-+
-+
-+
-+	// use chip default if zero
-+	if (oobsel == NULL)
-+		oobsel = &mtd->oobinfo;
-+
-+	eccmode = oobsel->useecc ? this->eccmode : NAND_ECC_NONE;
-+	oob_config = oobsel->eccpos;
-+
-+	DEBUG (MTD_DEBUG_LEVEL3, "nand_read_ecc: from = 0x%08x, len = %i\n", (unsigned int) from, (int) len);
-+
-+	/* Do not allow reads past end of device */
-+	if ((from + len) > mtd->size) {
-+		DEBUG (MTD_DEBUG_LEVEL0, "nand_read_ecc: Attempt read beyond end of device\n");
-+		*retlen = 0;
-+		return -EINVAL;
-+	}
-+
-+	/* Grab the lock and see if the device is available */
-+	sl2312_nand_get_chip (this, mtd ,FL_READING, &erase_state);
-+
-+	/* Select the NAND device */
-+	this->select_chip(mtd, 0);
-+
-+	/* First we calculate the starting page */
-+	page = from >> this->page_shift;
-+
-+	//end_page = mtd->oobblock + mtd->oobsize;
-+	end = mtd->oobblock;
-+	//ecc = mtd->eccsize;
-+	/* Get raw starting column */
-+	col = (from & (mtd->oobblock - 1));
-+
-+
-+	/* Send the read command */
-+	//this->cmdfunc (mtd, NAND_CMD_READ0, 0x00, page);
-+
-+	/* Loop until all data read */
-+	FLASH_WRITE_REG(NFLASH_ACCESS, NFLASH_DIRECT);
-+	while (read < len) {
-+
-+		//udelay(1200);
-+		/* If we have consequent page reads, apply delay or wait for ready/busy pin */
-+		if (read) {
-+			if (!this->dev_ready)
-+				udelay (this->chip_delay);
-+			else
-+				while (!this->dev_ready(mtd));
-+		}
-+
-+		/*
-+		 * If the read is not page aligned, we have to read into data buffer
-+		 * due to ecc, else we read into return buffer direct
-+		 */
-+		if (!col && (len - read) >= end)
-+			data_poi = &buf[read];
-+		else
-+			data_poi = this->data_buf;
-+
-+		/* get oob area, if we have no oob buffer from fs-driver */
-+		if (!oob_buf) {
-+			oob_data = &this->data_buf[end];
-+			oob = 0;
-+		}
-+
-+		j = 0;
-+		switch (eccmode) {
-+			case NAND_ECC_NONE: {	/* No ECC, Read in a page */
-+				FLASH_WRITE_REG(NFLASH_ECC_CONTROL, 0x0); //set 31b = 0
-+				break;
-+			}
-+
-+			case NAND_ECC_SOFT:	/* Software ECC 3/256: Read in a page + oob data */
-+				break;
-+
-+			case NAND_ECC_HW3_256: /* Hardware ECC 3 byte /256 byte data: Read in first 256 byte, get ecc, */
-+				break;
-+
-+			case NAND_ECC_HW3_512:
-+			case NAND_ECC_HW6_512: /* Hardware ECC 3/6 byte / 512 byte data : Read in a page  */
-+				FLASH_WRITE_REG(NFLASH_ECC_CONTROL, 0x80000001); //set 31b = 0
-+				break;
-+
-+			default:
-+				printk (KERN_WARNING "Invalid NAND_ECC_MODE %d\n", this->eccmode);
-+				FLASH_WRITE_REG(NFLASH_ECC_CONTROL, 0x0);
-+				//BUG();
-+		}//end switch
-+
-+			for(i=0;ioobblock +i);
-+			}
-+			/* read oobdata */
-+			for (i = 0; i <  mtd->oobsize; i++)
-+			{
-+				//udelay(7);
-+				oob_data[oob + i] = FLASH_READ_DATA(page*mtd->oobblock +end+i);
-+			}
-+
-+		/* Skip ECC, if not active */
-+			if (eccmode == NAND_ECC_NONE)
-+				goto readdata;
-+
-+			// compare ecc and correct data
-+
-+				opcode=FLASH_READ_REG(NFLASH_ECC_STATUS);
-+				while(!(opcode&0x80000000)) //polling flash access 31b
-+      			{
-+        			   opcode=FLASH_READ_REG(NFLASH_ECC_STATUS);
-+        			   //sl2312_flash_delay();
-+        			   schedule();
-+      			}
-+      			for(j=0;j<(end/512);j++)
-+      			{//for 2k page
-+
-+					opcode = 0x00000000|oob_data[mtd->oobsize-3-4*j]<<16|oob_data[mtd->oobsize-2-4*j]<<8|oob_data[mtd->oobsize-1-4*j];
-+
-+					//opcode=FLASH_READ_REG(NFLASH_ECC_CODE_GEN0+(j*4));
-+
-+					FLASH_WRITE_REG(NFLASH_ECC_OOB, opcode);
-+					opcode = 0x00000000|(j<<8); //select ECC code generation 0
-+					FLASH_WRITE_REG(NFLASH_ECC_CONTROL, opcode); //???
-+
-+					opcode=FLASH_READ_REG(NFLASH_ECC_STATUS);
-+					if((opcode&0x00000003)==0x03)
-+					{
-+						printk (KERN_WARNING "\nPageRead Uncorrectable error !!\n");
-+						ecc_failed++;
-+					}
-+					else if((opcode&0x00000003)==0x01)
-+					{
-+						printk (KERN_WARNING "\nPageRead One bit data error !!");
-+						// correct data
-+						if((data_poi[(opcode&0xff80)>>7]>>((opcode&0x38)>>3))%1)
-+							data_poi[(opcode&0xff80)>>7] &= ~(1<<((opcode&0x38)>>3));
-+						else
-+							data_poi[(opcode&0xff80)>>7] |= (1<<((opcode&0x38)>>3));
-+
-+					}
-+					else if((opcode&0x00000003)==0x02)
-+					{
-+						printk (KERN_WARNING "\nPageRead One bit ECC error !!\n");
-+					}
-+					else if((opcode&0x00000003)==0x00)
-+					{
-+
-+					}
-+
-+				}//for 2k page
-+readdata:
-+		if (col || (len - read) < end) {
-+			for (j = col; j < end && read < len; j++)
-+				buf[read++] = data_poi[j];
-+		} else
-+			read += mtd->oobblock;
-+		/* For subsequent reads align to page boundary. */
-+		col = 0;
-+		/* Increment page address */
-+		page++;
-+		schedule();
-+	}
-+	/* De-select the NAND device */
-+	//this->select_chip(mtd, -1);
-+	FLASH_WRITE_REG(NFLASH_ECC_CONTROL, 0x0); //set 31b = 0
-+	FLASH_WRITE_REG(NFLASH_ACCESS, NFLASH_INDIRECT);
-+	/* Wake up anyone waiting on the device */
-+	spin_lock_bh (&this->chip_lock);
-+	this->state = FL_READY;
-+	wake_up (&this->wq);
-+	spin_unlock_bh (&this->chip_lock);
-+
-+	/*
-+	 * Return success, if no ECC failures, else -EIO
-+	 * fs driver will take care of that, because
-+	 * retlen == desired len and result == -EIO
-+	 */
-+	*retlen = read;
-+	return ecc_failed ? -EIO : 0;
-+}
-+
-+/*
-+ * Wait for command done. This applies to erase and program only
-+ * Erase can take up to 400ms and program up to 20ms according to
-+ * general NAND and SmartMedia specs
-+ *
-+*/
-+static int sl2312_nand_waitfunc(struct mtd_info *mtd, struct nand_chip *this, int state)
-+{
-+	unsigned long	timeo = jiffies;
-+	int	status, opcode;
-+
-+	if (state == FL_ERASING)
-+		 timeo += (HZ * 400) / 1000;
-+	else
-+		 timeo += (HZ * 20) / 1000;
-+
-+	spin_lock_bh (&this->chip_lock);
-+	FLASH_WRITE_REG(NFLASH_ECC_CONTROL, 0x00000000); //set 31b = 0
-+	FLASH_WRITE_REG(NFLASH_COUNT, 0x007f000070); //set only command no address and two data
-+
-+	FLASH_WRITE_REG(NFLASH_CMD_ADDR, 0x00000070); //write read status command
-+
-+
-+	opcode = 0x80002000|DWIDTH|CHIP_EN; //set start bit & 8bits read command
-+	FLASH_WRITE_REG(NFLASH_ACCESS, opcode);
-+
-+	while(opcode&0x80000000) //polling flash access 31b
-+    {
-+        opcode=FLASH_READ_REG(NFLASH_ACCESS);
-+        //sl2312_flash_delay();
-+        schedule();
-+    }
-+
-+	while (time_before(jiffies, timeo)) {
-+		/* Check, if we were interrupted */
-+		if (this->state != state) {
-+			spin_unlock_bh (&this->chip_lock);
-+			FLASH_WRITE_REG(NFLASH_ACCESS, NFLASH_DIRECT);
-+			return 0;
-+		}
-+		if (this->dev_ready) {
-+			if (this->dev_ready(mtd))
-+				break;
-+		}
-+		if (FLASH_READ_REG(NFLASH_DATA) & 0x40)
-+			break;
-+
-+		spin_unlock_bh (&this->chip_lock);
-+		yield ();
-+		spin_lock_bh (&this->chip_lock);
-+	}
-+	status = FLASH_READ_REG(NFLASH_DATA)&0xff;
-+	spin_unlock_bh (&this->chip_lock);
-+	FLASH_WRITE_REG(NFLASH_ACCESS, NFLASH_DIRECT);
-+	return status;
-+}
-+
-+static int sl2312_nand_read_oob (struct mtd_info *mtd, loff_t from, size_t len, size_t * retlen, u_char * buf)
-+{
-+	int i, col, page, j=0;
-+	//int erase_state = 0;
-+	struct nand_chip *this = mtd->priv;
-+	u_char *databuf, *oobbuf;
-+
-+	databuf = &this->data_buf[0];
-+	oobbuf = &this->data_buf[mtd->oobblock];
-+		for (i = 0; i < mtd->oobsize; i++)
-+			oobbuf[i] = 0xff;
-+
-+	DEBUG (MTD_DEBUG_LEVEL3, "nand_read_oob: from = 0x%08x, len = %i\n", (unsigned int) from, (int) len);
-+
-+	/* Shift to get page */
-+	page = ((int) from) >> this->page_shift;
-+
-+	/* Mask to get column */
-+	col = from & (mtd->oobsize-1);  //0x0f;
-+
-+	/* Initialize return length value */
-+	*retlen = 0;
-+	sl2312_nand_read_ecc (mtd, page, mtd->oobblock , retlen, databuf, oobbuf, NULL);
-+	for(i=col,j=0;ioobsize||i<(col+len);i++,j++)
-+		buf[j] = oobbuf[i];
-+
-+	*retlen = j ;
-+	return 0;
-+}
-+
-+#define NOTALIGNED(x) (x & (mtd->oobblock-1)) != 0
-+/*
-+*	Use NAND write ECC
-+*/
-+static int sl2312_nand_write (struct mtd_info *mtd, loff_t to, size_t len, size_t * retlen, const u_char * buf)
-+{
-+	return (sl2312_nand_write_ecc (mtd, to, len, retlen, buf, NULL, NULL));
-+}
-+
-+/*
-+ * NAND write with ECC
-+ */
-+static int sl2312_nand_write_ecc (struct mtd_info *mtd, loff_t to, size_t len,
-+			   size_t * retlen, const u_char * buf, u_char * eccbuf, struct nand_oobinfo *oobsel)
-+{
-+	int page, ret = 0, oob = 0, written = 0;
-+	struct nand_chip *this = mtd->priv;
-+
-+	DEBUG (MTD_DEBUG_LEVEL3, "nand_write_ecc: to = 0x%08x, len = %i\n", (unsigned int) to, (int) len);
-+
-+
-+	/* Do not allow write past end of device */
-+	if ((to + len) > mtd->size) {
-+		DEBUG (MTD_DEBUG_LEVEL0, "nand_write_ecc: Attempt to write past end of page\n");
-+		return -EINVAL;
-+	}
-+
-+	/* reject writes, which are not page aligned */
-+	if (NOTALIGNED (to) || NOTALIGNED(len)) {
-+		printk (KERN_NOTICE "nand_write_ecc: Attempt to write not page aligned data\n");
-+		return -EINVAL;
-+	}
-+
-+	// if oobsel is NULL, use chip defaults
-+	if (oobsel == NULL)
-+		oobsel = &mtd->oobinfo;
-+
-+	/* Shift to get page */
-+	page = ((int) to) >> this->page_shift;
-+
-+	/* Grab the lock and see if the device is available */
-+	sl2312_nand_get_chip (this, mtd, FL_WRITING, NULL);
-+
-+	/* Select the NAND device */
-+	this->select_chip(mtd, 0);
-+
-+	/* Check the WP bit */
-+	if (!(sl2312_device_ready(mtd) & 0x80)) {
-+		DEBUG (MTD_DEBUG_LEVEL0, "nand_write_ecc: Device is write protected!!!\n");
-+		ret = -EIO;
-+		goto out;
-+	}
-+
-+	/* Loop until all data is written */
-+	while (written < len) {
-+		//udelay(100);
-+		int cnt = mtd->oobblock;
-+		this->data_poi = (u_char*) &buf[written];
-+		/* We use the same function for write and writev */
-+		if (eccbuf) {
-+			ret = sl2312_nand_write_page (mtd, this, page, &eccbuf[oob], oobsel);
-+			oob += mtd->oobsize;
-+		} else
-+			ret = sl2312_nand_write_page (mtd, this, page, NULL, oobsel);
-+
-+		if (ret)
-+			goto out;
-+
-+		/* Update written bytes count */
-+		written += cnt;
-+		/* Increment page address */
-+		page++;
-+	}
-+
-+out:
-+	/* De-select the NAND device */
-+	//this->select_chip(mtd, -1);
-+
-+	/* Wake up anyone waiting on the device */
-+	spin_lock_bh (&this->chip_lock);
-+	this->state = FL_READY;
-+	wake_up (&this->wq);
-+	spin_unlock_bh (&this->chip_lock);
-+
-+	*retlen = written;
-+	return ret;
-+}
-+
-+/*
-+ *	Nand_page_program function is used for write and writev !
-+ *	This function will always program a full page of data
-+ *	If you call it with a non page aligned buffer, you're lost :)
-+ */
-+static int sl2312_nand_write_page (struct mtd_info *mtd, struct nand_chip *this, int page, u_char *oob_buf,  struct nand_oobinfo *oobsel)
-+{
-+	int 	i, j, status, opcode;
-+	u_char	ecc_code[16], *oob_data;
-+	int	eccmode = oobsel->useecc ? this->eccmode : NAND_ECC_NONE;
-+	//int  	*oob_config = oobsel->eccpos;
-+
-+	/* pad oob area, if we have no oob buffer from fs-driver */
-+	if (!oob_buf) {
-+		oob_data = &this->data_buf[mtd->oobblock];
-+		for (i = 0; i < mtd->oobsize; i++)
-+			oob_data[i] = 0xff;
-+	} else
-+		oob_data = oob_buf;
-+
-+	/* Send command to begin auto page programming */
-+
-+	memset(oob_data,0xff,mtd->oobsize);
-+	/* Write out complete page of data, take care of eccmode */
-+	switch (eccmode) {
-+	/* No ecc and software ecc 3/256, write all */
-+	case NAND_ECC_NONE:
-+		printk (KERN_WARNING "Writing data without ECC to NAND-FLASH is not recommended\n");
-+		FLASH_WRITE_REG(NFLASH_ECC_CONTROL, 0x0); //set 31b = 0
-+		break;
-+	case NAND_ECC_SOFT:
-+		break;
-+
-+	/* Hardware ecc 3 byte / 256 data, write first half, get ecc, then second, if 512 byte pagesize */
-+	case NAND_ECC_HW3_256:
-+		break;
-+
-+	/* Hardware ecc 3 byte / 512 byte data, write full page */
-+	case NAND_ECC_HW3_512:
-+		FLASH_WRITE_REG(NFLASH_ECC_CONTROL, 0x80000001); //set 31b = 0
-+
-+	/* Hardware ecc 6 byte / 512 byte data, write full page */
-+	case NAND_ECC_HW6_512:
-+		break;
-+
-+	default:
-+		printk (KERN_WARNING "Invalid NAND_ECC_MODE %d\n", this->eccmode);
-+		FLASH_WRITE_REG(NFLASH_ECC_CONTROL, 0x0); //set 31b = 0
-+		//BUG();
-+	}
-+
-+	FLASH_WRITE_REG(NFLASH_ACCESS, NFLASH_DIRECT);
-+
-+	for(i=0;ioobblock;i++)
-+	{
-+		//udelay(5);
-+		FLASH_WRITE_DATA((page*mtd->oobblock)+i,this->data_poi[i]);
-+	}
-+	///////////////
-+	if(eccmode!=NAND_ECC_NONE)
-+	{
-+		opcode=FLASH_READ_REG(NFLASH_ECC_STATUS);
-+		while(!(opcode&0x80000000)) //polling flash access 31b
-+    	{
-+    	 	   opcode=FLASH_READ_REG(NFLASH_ECC_STATUS);
-+    	 	   //sl2312_flash_delay();
-+    	 	   schedule();
-+    	}
-+
-+
-+    	for(i=0;i<(mtd->oobblock/512);i++)
-+    	{
-+    		opcode=FLASH_READ_REG(NFLASH_ECC_CODE_GEN0+(i*4));
-+
-+    		for(j=3;j>0;j--)
-+    		      oob_data[(mtd->oobsize-j-(i*4))] = (opcode<<((4-j)*8)) >>24;
-+
-+    		for(j=0;j<4;j++)
-+    		{
-+    			ecc_code[15-i*4] = opcode;
-+    			ecc_code[15-i*4-1] = opcode>>8;
-+    			ecc_code[15-i*4-2] = opcode>>16;
-+    		}
-+    	}
-+
-+    	//disable ecc
-+    	FLASH_WRITE_REG(NFLASH_ECC_CONTROL, 0x00000000);
-+
-+    	/* Write out OOB data */
-+    	for(i=0;ioobsize;i++)
-+    	{
-+    		//udelay(5);
-+			FLASH_WRITE_DATA((page*mtd->oobblock)+mtd->oobblock+i,oob_data[i]);
-+		}
-+    }
-+    else
-+    {
-+    	for(i=0;ioobsize;i++)
-+    	{
-+    		//udelay(5);
-+			FLASH_WRITE_DATA((page*mtd->oobblock)+mtd->oobblock+i,0xff);
-+		}
-+    }
-+
-+
-+	/* call wait ready function */
-+	status = this->waitfunc (mtd, this, FL_WRITING);
-+	FLASH_WRITE_REG(NFLASH_ECC_CONTROL, 0x0); //set 31b = 0
-+	/* See if device thinks it succeeded */
-+	if (status & 0x01) {
-+		DEBUG (MTD_DEBUG_LEVEL0, "%s: " "Failed write, page 0x%08x, ", __FUNCTION__, page);
-+		FLASH_WRITE_REG(NFLASH_ECC_CONTROL, 0x0); //set 31b = 0
-+		return -EIO;
-+	}
-+
-+#ifdef CONFIG_MTD_NAND_VERIFY_WRITE
-+	/*
-+	 * The NAND device assumes that it is always writing to
-+	 * a cleanly erased page. Hence, it performs its internal
-+	 * write verification only on bits that transitioned from
-+	 * 1 to 0. The device does NOT verify the whole page on a
-+	 * byte by byte basis. It is possible that the page was
-+	 * not completely erased or the page is becoming unusable
-+	 * due to wear. The read with ECC would catch the error
-+	 * later when the ECC page check fails, but we would rather
-+	 * catch it early in the page write stage. Better to write
-+	 * no data than invalid data.
-+	 */
-+
-+	/* Send command to read back the page */
-+	this->cmdfunc (mtd, NAND_CMD_READ0, 0, page);
-+	/* Loop through and verify the data */
-+	if (this->verify_buf(mtd, this->data_poi, mtd->oobblock)) {
-+		DEBUG (MTD_DEBUG_LEVEL0, "%s: " "Failed write verify, page 0x%08x ", __FUNCTION__, page);
-+		return -EIO;
-+	}
-+
-+	/* check, if we have a fs-supplied oob-buffer */
-+	if (oob_buf) {
-+		if (this->verify_buf(mtd, oob_data, mtd->oobsize)) {
-+			DEBUG (MTD_DEBUG_LEVEL0, "%s: " "Failed write verify, page 0x%08x ", __FUNCTION__, page);
-+			return -EIO;
-+		}
-+	} else {
-+		if (eccmode != NAND_ECC_NONE) {
-+			int ecc_bytes = 0;
-+
-+			switch (this->eccmode) {
-+			case NAND_ECC_SOFT:
-+			case NAND_ECC_HW3_256: ecc_bytes = (mtd->oobblock == 512) ? 6 : 3; break;
-+			case NAND_ECC_HW3_512: ecc_bytes = 3; break;
-+			case NAND_ECC_HW6_512: ecc_bytes = 6; break;
-+			}
-+
-+
-+
-+			for(i=0;i < (mtd->oobblock+mtd->oobsize);i++)
-+			{
-+				if(i>=mtd->oobblock)
-+					oob_data[i-mtd->oobblock] = FLASH_READ_DATA((page*mtd->oobblock) +i);
-+				else
-+					oob_data[0] = FLASH_READ_DATA((page*mtd->oobblock) +i);
-+			}
-+
-+			if(this->eccmode == NAND_ECC_HW3_512)
-+			{
-+				for(i=0;i<(mtd->oobblock/512);i++)
-+    			{
-+    				for(j=0;j<3;j++)
-+    				{
-+    				    if (oob_data[mtd->oobsize-1-j-4*i] != ecc_code[15-j-4*i]) {
-+							DEBUG (MTD_DEBUG_LEVEL0,
-+							       "%s: Failed ECC write "
-+						       "verify, page 0x%08x, " "%6i bytes were succesful\n", __FUNCTION__, page, i);
-+							return -EIO;
-+						}
-+    				}
-+    			}
-+			}
-+		}//eccmode != NAND_ECC_NONE
-+	}
-+	/*
-+	 * Terminate the read command. This is faster than sending a reset command or
-+	 * applying a 20us delay before issuing the next programm sequence.
-+	 * This is not a problem for all chips, but I have found a bunch of them.
-+	 */
-+	//this->select_chip(mtd, -1);
-+	//this->select_chip(mtd, 0);
-+#endif
-+
-+	return 0;
-+}
-+
-+/*
-+ * NAND write with iovec
-+ */
-+static int sl2312_nand_writev (struct mtd_info *mtd, const struct kvec *vecs, unsigned long count,
-+		loff_t to, size_t * retlen)
-+{
-+	return (sl2312_nand_writev_ecc (mtd, vecs, count, to, retlen, NULL, 0));
-+}
-+
-+static int sl2312_nand_writev_ecc (struct mtd_info *mtd, const struct kvec *vecs, unsigned long count,
-+		loff_t to, size_t * retlen, u_char *eccbuf, struct nand_oobinfo *oobsel)
-+{
-+	int i, page, len, total_len, ret = 0, written = 0;
-+	struct nand_chip *this = mtd->priv;
-+
-+	/* Calculate total length of data */
-+	total_len = 0;
-+	for (i = 0; i < count; i++)
-+		total_len += (int) vecs[i].iov_len;
-+
-+	DEBUG (MTD_DEBUG_LEVEL3,
-+	       "nand_writev: to = 0x%08x, len = %i, count = %ld\n", (unsigned int) to, (unsigned int) total_len, count);
-+
-+	/* Do not allow write past end of page */
-+	if ((to + total_len) > mtd->size) {
-+		DEBUG (MTD_DEBUG_LEVEL0, "nand_writev: Attempted write past end of device\n");
-+		return -EINVAL;
-+	}
-+
-+	/* reject writes, which are not page aligned */
-+	if (NOTALIGNED (to) || NOTALIGNED(total_len)) {
-+		printk (KERN_NOTICE "nand_write_ecc: Attempt to write not page aligned data\n");
-+		return -EINVAL;
-+	}
-+
-+	// if oobsel is NULL, use chip defaults
-+	if (oobsel == NULL)
-+		oobsel = &mtd->oobinfo;
-+
-+	/* Shift to get page */
-+	page = ((int) to) >> this->page_shift;
-+
-+	/* Grab the lock and see if the device is available */
-+	sl2312_nand_get_chip (this, mtd, FL_WRITING, NULL);
-+
-+	/* Select the NAND device */
-+	this->select_chip(mtd, 0);
-+
-+	/* Check the WP bit */
-+	if (!(sl2312_device_ready(mtd) & 0x80)) {
-+		DEBUG (MTD_DEBUG_LEVEL0, "sl2312_nand_writev_ecc: Device is write protected!!!\n");
-+		ret = -EIO;
-+		goto out;
-+	}
-+
-+	/* Loop until all iovecs' data has been written */
-+	len = 0;
-+	while (count) {
-+		/*
-+		 *  Check, if the tuple gives us not enough data for a
-+		 *  full page write. Then we can use the iov direct,
-+		 *  else we have to copy into data_buf.
-+		 */
-+		if ((vecs->iov_len - len) >= mtd->oobblock) {
-+			this->data_poi = (u_char *) vecs->iov_base;
-+			this->data_poi += len;
-+			len += mtd->oobblock;
-+			/* Check, if we have to switch to the next tuple */
-+			if (len >= (int) vecs->iov_len) {
-+				vecs++;
-+				len = 0;
-+				count--;
-+			}
-+		} else {
-+			/*
-+			 * Read data out of each tuple until we have a full page
-+			 * to write or we've read all the tuples.
-+		 	*/
-+			int cnt = 0;
-+			while ((cnt < mtd->oobblock) && count) {
-+				if (vecs->iov_base != NULL && vecs->iov_len) {
-+					this->data_buf[cnt++] = ((u_char *) vecs->iov_base)[len++];
-+				}
-+				/* Check, if we have to switch to the next tuple */
-+				if (len >= (int) vecs->iov_len) {
-+					vecs++;
-+					len = 0;
-+					count--;
-+				}
-+			}
-+			this->data_poi = this->data_buf;
-+		}
-+
-+		/* We use the same function for write and writev !) */
-+		ret = sl2312_nand_write_page (mtd, this, page, NULL, oobsel);
-+		if (ret)
-+			goto out;
-+
-+		/* Update written bytes count */
-+		written += mtd->oobblock;;
-+
-+		/* Increment page address */
-+		page++;
-+	}
-+
-+out:
-+	/* De-select the NAND device */
-+	//this->select_chip(mtd, -1);
-+
-+	/* Wake up anyone waiting on the device */
-+	spin_lock_bh (&this->chip_lock);
-+	this->state = FL_READY;
-+	wake_up (&this->wq);
-+	spin_unlock_bh (&this->chip_lock);
-+
-+	*retlen = written;
-+	return ret;
-+}
-+
-+/*
-+static u_char ffchars[] = {
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff
-+};
-+*/
-+/*
-+ * NAND write out-of-band
-+ */
-+static int sl2312_nand_write_oob (struct mtd_info *mtd, loff_t to, size_t len, size_t * retlen, const u_char * buf)
-+{
-+	int column, page, status, ret = 0, j=0;
-+	struct nand_chip *this = mtd->priv;
-+	u_char *databuf, *oobbuf;
-+
-+
-+		databuf = &this->data_buf[0];
-+		oobbuf = &this->data_buf[mtd->oobblock];
-+		for (j = 0; j < mtd->oobsize; j++)
-+			oobbuf[j] = 0xff;
-+//#ifdef CONFIG_MTD_NAND_VERIFY_WRITE
-+//	int 	i;
-+//#endif
-+
-+	DEBUG (MTD_DEBUG_LEVEL3, "nand_write_oob: to = 0x%08x, len = %i\n", (unsigned int) to, (int) len);
-+
-+	/* Shift to get page */
-+	page = ((int) to) >> this->page_shift;
-+
-+	/* Mask to get column */
-+	column = to & 0x1f;
-+
-+	/* Initialize return length value */
-+	*retlen = 0;
-+
-+	/* Do not allow write past end of page */
-+	if ((column + len) > mtd->oobsize) {
-+		DEBUG (MTD_DEBUG_LEVEL0, "nand_write_oob: Attempt to write past end of page\n");
-+		return -EINVAL;
-+	}
-+
-+	/* Grab the lock and see if the device is available */
-+	sl2312_nand_get_chip (this, mtd, FL_WRITING, NULL);
-+
-+	/* Select the NAND device */
-+	this->select_chip(mtd, 0);
-+
-+	/* Reset the chip. Some chips (like the Toshiba TC5832DC found
-+	   in one of my DiskOnChip 2000 test units) will clear the whole
-+	   data page too if we don't do this. I have no clue why, but
-+	   I seem to have 'fixed' it in the doc2000 driver in
-+	   August 1999.  dwmw2. */
-+	this->cmdfunc(mtd, NAND_CMD_RESET, -1, -1);
-+
-+	/* Check the WP bit */
-+	if (!(sl2312_device_ready(mtd) & 0x80)) {
-+		DEBUG (MTD_DEBUG_LEVEL0, "nand_write_oob: Device is write protected!!!\n");
-+		ret = -EIO;
-+		goto out;
-+	}
-+	/* Write out desired data */
-+	this->cmdfunc (mtd, NAND_CMD_SEQIN, mtd->oobblock, page);
-+
-+	sl2312_nand_read_ecc (mtd, page, mtd->oobblock , retlen, databuf, oobbuf, NULL);
-+
-+    for(j=column;j<(column+len);j++)
-+    	oobbuf[j] = buf[j-column];
-+    sl2312_nand_write_ecc (mtd, page, mtd->oobblock, retlen, databuf, oobbuf, NULL);
-+
-+	status = this->waitfunc (mtd, this, FL_WRITING);
-+
-+	/* See if device thinks it succeeded */
-+	if (status & 0x01) {
-+		DEBUG (MTD_DEBUG_LEVEL0, "nand_write_oob: " "Failed write, page 0x%08x\n", page);
-+		ret = -EIO;
-+		goto out;
-+	}
-+	/* Return happy */
-+	*retlen = len;
-+
-+
-+out:
-+	/* De-select the NAND device */
-+	//this->select_chip(mtd, -1);
-+
-+	/* Wake up anyone waiting on the device */
-+	spin_lock_bh (&this->chip_lock);
-+	this->state = FL_READY;
-+	wake_up (&this->wq);
-+	spin_unlock_bh (&this->chip_lock);
-+
-+	return ret;
-+}
-+
-+/*
-+ * NAND sync
-+ */
-+static void sl2312_nand_sync (struct mtd_info *mtd)
-+{
-+	struct nand_chip *this = mtd->priv;
-+	DECLARE_WAITQUEUE (wait, current);
-+
-+	DEBUG (MTD_DEBUG_LEVEL3, "nand_sync: called\n");
-+
-+retry:
-+	/* Grab the spinlock */
-+	spin_lock_bh (&this->chip_lock);
-+
-+	/* See what's going on */
-+	switch (this->state) {
-+	case FL_READY:
-+	case FL_SYNCING:
-+		this->state = FL_SYNCING;
-+		spin_unlock_bh (&this->chip_lock);
-+		break;
-+
-+	default:
-+		/* Not an idle state */
-+		add_wait_queue (&this->wq, &wait);
-+		spin_unlock_bh (&this->chip_lock);
-+		schedule ();
-+
-+		remove_wait_queue (&this->wq, &wait);
-+		goto retry;
-+	}
-+
-+	/* Lock the device */
-+	spin_lock_bh (&this->chip_lock);
-+
-+	/* Set the device to be ready again */
-+	if (this->state == FL_SYNCING) {
-+		this->state = FL_READY;
-+		wake_up (&this->wq);
-+	}
-+
-+	/* Unlock the device */
-+	spin_unlock_bh (&this->chip_lock);
-+}
-+
-+
-+/*
-+ * Scan for the NAND device
-+ */
-+int sl2312_nand_scan (struct mtd_info *mtd, int maxchips)
-+{
-+	int i, j, nand_maf_id, nand_dev_id, busw;
-+	struct nand_chip *this = mtd->priv;
-+	unsigned char id[4];
-+
-+	/* Get buswidth to select the correct functions*/
-+	busw = this->options & NAND_BUSWIDTH_16;
-+
-+	/* check for proper chip_delay setup, set 20us if not */
-+	if (!this->chip_delay)
-+		this->chip_delay = 20;
-+
-+	/* check, if a user supplied command function given */
-+	if (this->cmdfunc == NULL)
-+		this->cmdfunc = sl2312_nand_command;
-+
-+	/* check, if a user supplied wait function given */
-+	if (this->waitfunc == NULL)
-+		this->waitfunc = sl2312_nand_waitfunc;
-+
-+	if (!this->select_chip)
-+		this->select_chip = sl2312_nand_select_chip;
-+	if (!this->write_byte)
-+		this->write_byte = sl2312_nand_write_byte; //busw ? nand_write_byte16 : nand_write_byte;
-+	if (!this->read_byte)
-+		this->read_byte = sl2312_nand_read_byte; //busw ? nand_read_byte16 : nand_read_byte;
-+//	if (!this->write_word)
-+//		this->write_word = nand_write_word;
-+//	if (!this->read_word)
-+//		this->read_word = nand_read_word;
-+//	if (!this->block_bad)
-+		this->block_bad = sl2312_nand_block_bad; //nand_block_bad;
-+	if (!this->block_markbad)
-+		this->block_markbad = sl2312_nand_default_block_markbad;
-+	if (!this->write_buf)
-+		this->write_buf = sl2312_nand_write_buf; //busw ? nand_write_buf16 : nand_write_buf;
-+	if (!this->read_buf)
-+		this->read_buf = sl2312_nand_read_buf; //busw ? nand_read_buf16 : nand_read_buf;
-+	if (!this->verify_buf)
-+		this->verify_buf = sl2312_nand_verify_buf; //busw ? nand_verify_buf16 : nand_verify_buf;
-+	if (!this->scan_bbt)
-+		this->scan_bbt = sl2312_nand_scan_bbt;
-+
-+	/* Select the device */
-+	this->select_chip(mtd, 0);
-+
-+	/* Read manufacturer and device IDs */
-+	nand_read_id(0,id);
-+
-+	nand_maf_id = id[0];
-+	nand_dev_id = id[1];
-+
-+	/* Print and store flash device information */
-+	for (i = 0; nand_flash_ids[i].name != NULL; i++) {
-+
-+		if (nand_dev_id != nand_flash_ids[i].id)
-+			continue;
-+
-+		if (!mtd->name) mtd->name = nand_flash_ids[i].name;
-+		this->chipsize = nand_flash_ids[i].chipsize << 20;
-+
-+		/* New devices have all the information in additional id bytes */
-+		if (!nand_flash_ids[i].pagesize) {
-+			int extid;
-+
-+			/* The 4th id byte is the important one */
-+			extid = id[3];
-+			/* Calc pagesize */
-+			mtd->oobblock = 1024 << (extid & 0x3);
-+			extid >>= 2;
-+			/* Calc oobsize */
-+			mtd->oobsize = (8 << (extid & 0x03)) * (mtd->oobblock / 512);
-+			extid >>= 2;
-+			/* Calc blocksize. Blocksize is multiples of 64KiB */
-+			mtd->erasesize = (64 * 1024)  << (extid & 0x03);
-+			extid >>= 2;
-+			/* Get buswidth information */
-+			busw = (extid & 0x01) ? NAND_BUSWIDTH_16 : 0;
-+
-+		} else {
-+			/* Old devices have this data hardcoded in the
-+			 * device id table */
-+			mtd->erasesize = nand_flash_ids[i].erasesize;
-+			mtd->oobblock = nand_flash_ids[i].pagesize;
-+			mtd->oobsize = mtd->oobblock / 32;
-+			busw = nand_flash_ids[i].options & NAND_BUSWIDTH_16;
-+		}
-+
-+		/* Check, if buswidth is correct. Hardware drivers should set
-+		 * this correct ! */
-+		if (busw != (this->options & NAND_BUSWIDTH_16)) {
-+			printk (KERN_INFO "NAND device: Manufacturer ID:"
-+				" 0x%02x, Chip ID: 0x%02x (%s %s)\n", nand_maf_id, nand_dev_id,
-+				nand_manuf_ids[i].name , mtd->name);
-+			printk (KERN_WARNING
-+				"NAND bus width %d instead %d bit\n",
-+					(this->options & NAND_BUSWIDTH_16) ? 16 : 8,
-+					busw ? 16 : 8);
-+			this->select_chip(mtd, -1);
-+			return 1;
-+		}
-+
-+		/* Calculate the address shift from the page size */
-+		this->page_shift = ffs(mtd->oobblock) - 1;
-+		this->bbt_erase_shift = this->phys_erase_shift = ffs(mtd->erasesize) - 1;
-+		this->chip_shift = ffs(this->chipsize) - 1;
-+
-+		/* Set the bad block position */
-+		this->badblockpos = mtd->oobblock > 512 ?
-+			NAND_LARGE_BADBLOCK_POS : NAND_SMALL_BADBLOCK_POS;
-+
-+		/* Get chip options, preserve non chip based options */
-+		this->options &= ~NAND_CHIPOPTIONS_MSK;
-+		this->options |= nand_flash_ids[i].options & NAND_CHIPOPTIONS_MSK;
-+		/* Set this as a default. Board drivers can override it, if neccecary */
-+		this->options |= NAND_NO_AUTOINCR;
-+		/* Check if this is a not a samsung device. Do not clear the options
-+		 * for chips which are not having an extended id.
-+		 */
-+		if (nand_maf_id != NAND_MFR_SAMSUNG && !nand_flash_ids[i].pagesize)
-+			this->options &= ~NAND_SAMSUNG_LP_OPTIONS;
-+
-+		/* Check for AND chips with 4 page planes */
-+	//	if (this->options & NAND_4PAGE_ARRAY)
-+	//		this->erase_cmd = multi_erase_cmd;
-+	//	else
-+	//		this->erase_cmd = single_erase_cmd;
-+
-+		/* Do not replace user supplied command function ! */
-+	//	if (mtd->oobblock > 512 && this->cmdfunc == nand_command)
-+	//		this->cmdfunc = nand_command_lp;
-+
-+		/* Try to identify manufacturer */
-+		for (j = 0; nand_manuf_ids[j].id != 0x0; j++) {
-+			if (nand_manuf_ids[j].id == nand_maf_id)
-+				break;
-+		}
-+		printk (KERN_INFO "NAND device: Manufacturer ID:"
-+			" 0x%02x, Chip ID: 0x%02x (%s %s)\n", nand_maf_id, nand_dev_id,
-+			nand_manuf_ids[j].name , nand_flash_ids[i].name);
-+		break;
-+	}
-+	/////////////////////////////
-+
-+	for (i=1; i < maxchips; i++) {
-+		this->select_chip(mtd, i);
-+
-+		/* Send the command for reading device ID */
-+		nand_read_id(1,id);
-+
-+		/* Read manufacturer and device IDs */
-+		if (nand_maf_id != id[0] ||
-+		    nand_dev_id != id[1])
-+			break;
-+	}
-+	if (i > 1)
-+		printk(KERN_INFO "%d NAND chips detected\n", i);
-+
-+	/* Allocate buffers, if neccecary */
-+	if (!this->oob_buf) {
-+		size_t len;
-+		len = mtd->oobsize << (this->phys_erase_shift - this->page_shift);
-+		this->oob_buf = kmalloc (len, GFP_KERNEL);
-+		if (!this->oob_buf) {
-+			printk (KERN_ERR "nand_scan(): Cannot allocate oob_buf\n");
-+			return -ENOMEM;
-+		}
-+		this->options |= NAND_OOBBUF_ALLOC;
-+	}
-+
-+	if (!this->data_buf) {
-+		size_t len;
-+		len = mtd->oobblock + mtd->oobsize;
-+		this->data_buf = kmalloc (len, GFP_KERNEL);
-+		if (!this->data_buf) {
-+			if (this->options & NAND_OOBBUF_ALLOC)
-+				kfree (this->oob_buf);
-+			printk (KERN_ERR "nand_scan(): Cannot allocate data_buf\n");
-+			return -ENOMEM;
-+		}
-+		this->options |= NAND_DATABUF_ALLOC;
-+	}
-+
-+	/* Store the number of chips and calc total size for mtd */
-+	this->numchips = i;
-+	mtd->size = i * this->chipsize;
-+	/* Convert chipsize to number of pages per chip -1. */
-+	this->pagemask = (this->chipsize >> this->page_shift) - 1;
-+	/* Preset the internal oob buffer */
-+	memset(this->oob_buf, 0xff, mtd->oobsize << (this->phys_erase_shift - this->page_shift));
-+
-+	/* If no default placement scheme is given, select an
-+	 * appropriate one */
-+	if (!this->autooob) {
-+		/* Select the appropriate default oob placement scheme for
-+		 * placement agnostic filesystems */
-+		switch (mtd->oobsize) {
-+		case 8:
-+			this->autooob = &nand_oob_8;
-+			break;
-+		case 16:
-+			this->autooob = &nand_oob_16;
-+			break;
-+		case 64:
-+			this->autooob = &nand_oob_64;
-+			break;
-+		default:
-+			printk (KERN_WARNING "No oob scheme defined for oobsize %d\n",
-+				mtd->oobsize);
-+			BUG();
-+		}
-+	}
-+
-+	/* The number of bytes available for the filesystem to place fs dependend
-+	 * oob data */
-+	if (this->options & NAND_BUSWIDTH_16) {
-+		mtd->oobavail = mtd->oobsize - (this->autooob->eccbytes + 2);
-+		if (this->autooob->eccbytes & 0x01)
-+			mtd->oobavail--;
-+	} else
-+		mtd->oobavail = mtd->oobsize - (this->autooob->eccbytes + 1);
-+
-+
-+	/*
-+	 * check ECC mode, default to software
-+	 * if 3byte/512byte hardware ECC is selected and we have 256 byte pagesize
-+	 * fallback to software ECC
-+	*/
-+	this->eccsize = 256;	/* set default eccsize */
-+	this->eccbytes = 3;
-+
-+	switch (this->eccmode) {
-+	case NAND_ECC_HW12_2048:
-+		if (mtd->oobblock < 2048) {
-+			printk(KERN_WARNING "2048 byte HW ECC not possible on %d byte page size, fallback to SW ECC\n",
-+			       mtd->oobblock);
-+			this->eccmode = NAND_ECC_SOFT;
-+			this->calculate_ecc = nand_calculate_ecc;
-+			this->correct_data = nand_correct_data;
-+		} else
-+			this->eccsize = 2048;
-+		break;
-+
-+	case NAND_ECC_HW3_512:
-+	case NAND_ECC_HW6_512:
-+	case NAND_ECC_HW8_512:
-+		if (mtd->oobblock == 256) {
-+			printk (KERN_WARNING "512 byte HW ECC not possible on 256 Byte pagesize, fallback to SW ECC \n");
-+			this->eccmode = NAND_ECC_SOFT;
-+			this->calculate_ecc = nand_calculate_ecc;
-+			this->correct_data = nand_correct_data;
-+		} else
-+			this->eccsize = 512; /* set eccsize to 512 */
-+		break;
-+
-+	case NAND_ECC_HW3_256:
-+		break;
-+
-+	case NAND_ECC_NONE:
-+		printk (KERN_WARNING "NAND_ECC_NONE selected by board driver. This is not recommended !!\n");
-+		this->eccmode = NAND_ECC_NONE;
-+		break;
-+
-+	case NAND_ECC_SOFT:
-+		this->calculate_ecc = nand_calculate_ecc;
-+		this->correct_data = nand_correct_data;
-+		break;
-+
-+	default:
-+		printk (KERN_WARNING "Invalid NAND_ECC_MODE %d\n", this->eccmode);
-+		BUG();
-+	}
-+
-+	/* Check hardware ecc function availability and adjust number of ecc bytes per
-+	 * calculation step
-+	*/
-+	switch (this->eccmode) {
-+	case NAND_ECC_HW12_2048:
-+		this->eccbytes += 4;
-+	case NAND_ECC_HW8_512:
-+		this->eccbytes += 2;
-+	case NAND_ECC_HW6_512:
-+		this->eccbytes += 3;
-+//	case NAND_ECC_HW3_512:
-+	case NAND_ECC_HW3_256:
-+		if (this->calculate_ecc && this->correct_data && this->enable_hwecc)
-+			break;
-+		printk (KERN_WARNING "No ECC functions supplied, Hardware ECC not possible\n");
-+		BUG();
-+	}
-+
-+	mtd->eccsize = this->eccsize;
-+
-+	/* Set the number of read / write steps for one page to ensure ECC generation */
-+	switch (this->eccmode) {
-+	case NAND_ECC_HW12_2048:
-+		this->eccsteps = mtd->oobblock / 2048;
-+		break;
-+	case NAND_ECC_HW3_512:
-+	case NAND_ECC_HW6_512:
-+	case NAND_ECC_HW8_512:
-+		this->eccsteps = mtd->oobblock / 512;
-+		break;
-+	case NAND_ECC_HW3_256:
-+	case NAND_ECC_SOFT:
-+		this->eccsteps = mtd->oobblock / 256;
-+		break;
-+
-+	case NAND_ECC_NONE:
-+		this->eccsteps = 1;
-+		break;
-+	}
-+
-+	/* Initialize state, waitqueue and spinlock */
-+	this->state = FL_READY;
-+	init_waitqueue_head (&this->wq);
-+	spin_lock_init (&this->chip_lock);
-+
-+	/* De-select the device */
-+	this->select_chip(mtd, 0);
-+
-+	/* Print warning message for no device */
-+	if (!mtd->size) {
-+		printk (KERN_WARNING "No NAND device found!!!\n");
-+		return 1;
-+	}
-+
-+	/* Fill in remaining MTD driver data */
-+	mtd->type = MTD_NANDFLASH;
-+	mtd->flags = MTD_CAP_NANDFLASH | MTD_ECC;
-+	mtd->ecctype = MTD_ECC_SW;
-+	mtd->erase = sl2312_nand_erase;
-+	mtd->point = NULL;
-+	mtd->unpoint = NULL;
-+	mtd->read = sl2312_nand_read;
-+	mtd->write = sl2312_nand_write;
-+	mtd->read_ecc = sl2312_nand_read_ecc;
-+	mtd->write_ecc = sl2312_nand_write_ecc;
-+	mtd->read_oob = sl2312_nand_read_oob;
-+	mtd->write_oob = sl2312_nand_write_oob;
-+	mtd->readv = NULL;
-+	mtd->writev = sl2312_nand_writev;
-+	mtd->writev_ecc = sl2312_nand_writev_ecc;
-+	mtd->sync = sl2312_nand_sync;
-+	mtd->lock = NULL;
-+	mtd->unlock = NULL;
-+	mtd->suspend = NULL;
-+	mtd->resume = NULL;
-+	mtd->block_isbad = sl2312_nand_block_isbad;
-+	mtd->block_markbad = sl2312_nand_block_markbad;
-+
-+	/* and make the autooob the default one */
-+	memcpy(&mtd->oobinfo, this->autooob, sizeof(mtd->oobinfo));
-+
-+	mtd->owner = THIS_MODULE;
-+
-+	/* Build bad block table */
-+	return this->scan_bbt (mtd);
-+}
-+
-+/*End Add function*/
-+
-+/*
-+ * Main initialization routine
-+ */
-+extern int nand_correct_data(struct mtd_info *mtd, u_char *dat, u_char *read_ecc, u_char *calc_ecc);
-+
-+int __init sl2312_mtd_init (void)
-+{
-+	struct nand_chip *this;
-+	int err = 0;
-+	struct mtd_partition *parts;
-+	int nr_parts = 0;
-+	int ret, data, *base;
-+
-+	printk("NAND MTD Driver Start Init ......\n");
-+
-+    	base = (unsigned int *)(IO_ADDRESS(SL2312_GLOBAL_BASE) + 0x30);
-+    	data = *base;
-+    	data&=0xffffffeb;
-+    	data|=0x3; //disable p & s flash
-+        *base = data;
-+
-+	/* Allocate memory for MTD device structure and private data */
-+	sl2312_mtd = kmalloc(sizeof(struct mtd_info) + sizeof(struct nand_chip), GFP_KERNEL);
-+	if (!sl2312_mtd) {
-+		printk ("Unable to allocate SL2312 NAND MTD device structure.\n");
-+		err = -ENOMEM;
-+		goto out;
-+	}
-+
-+      //  sl2312_device_setup();
-+
-+	/* io is indirect via a register so don't need to ioremap address */
-+
-+	/* Get pointer to private data */
-+	this = (struct nand_chip *) (&sl2312_mtd[1]);
-+
-+	/* Initialize structures */
-+	memset((char *) sl2312_mtd, 0, sizeof(struct mtd_info));
-+	memset((char *) this, 0, sizeof(struct nand_chip));
-+
-+	/* Link the private data with the MTD structure */
-+	sl2312_mtd->priv = this;
-+	sl2312_mtd->name = "sl2312-nand";
-+
-+	/* Set address of NAND IO lines */
-+	this->IO_ADDR_R = (void __iomem *)IO_ADDRESS((SL2312_FLASH_CTRL_BASE+NFLASH_DATA)); //(unsigned long)&(sl2312_ndfmcptr->dtr);
-+	this->IO_ADDR_W = (void __iomem *)IO_ADDRESS((SL2312_FLASH_CTRL_BASE+NFLASH_DATA)); //(unsigned long)&(sl2312_ndfmcptr->dtr);
-+	this->read_byte = sl2312_nand_read_byte;
-+    this->write_byte = sl2312_nand_write_byte;
-+    this->write_buf = sl2312_nand_write_buf;
-+	this->read_buf = sl2312_nand_read_buf;
-+	this->verify_buf = sl2312_nand_verify_buf;
-+	this->select_chip = sl2312_nand_select_chip;
-+	this->block_bad = sl2312_nand_block_bad;
-+	this->hwcontrol = sl2312_hwcontrol;
-+	this->dev_ready = sl2312_device_ready;
-+	this->cmdfunc = sl2312_nand_command;
-+	this->waitfunc = sl2312_nand_waitfunc;
-+	//this->calculate_ecc = sl2312_readecc;
-+	this->enable_hwecc = sl2312_enable_hwecc;
-+	this->eccmode = NAND_ECC_HW3_512;
-+	/*this->eccsize = 512;	*/
-+	/* 20 us command delay time */
-+	this->chip_delay = 20;
-+
-+	this->correct_data = nand_correct_data;
-+//	this->scan_bbt = sl2312_nand_scan_bbt;
-+
-+	/* Allocate memory for internal data buffer */
-+	this->data_buf = kmalloc (sizeof(u_char) * (sl2312_mtd->oobblock + sl2312_mtd->oobsize), GFP_KERNEL);
-+	if (!this->data_buf) {
-+		printk ("Unable to allocate NAND data buffer.\n");
-+		err = -ENOMEM;
-+		goto out_ior;
-+	}
-+
-+	/* Scan to find existance of the device */
-+	if (sl2312_nand_scan(sl2312_mtd, 1)) {
-+		err = -ENXIO;
-+		goto out_ior;
-+	}
-+
-+	/* Register the partitions */
-+	parts = sl2312_partitions;
-+	nr_parts = sizeof(sl2312_partitions)/sizeof(*parts);
-+
-+	ret = add_mtd_partitions(sl2312_mtd, sl2312_partitions, nr_parts);
-+	/*If we got an error, free all resources.*/
-+	if (ret < 0) {
-+		del_mtd_partitions(sl2312_mtd);
-+		map_destroy(sl2312_mtd);
-+	}
-+	goto out;
-+
-+//out_buf:
-+//	kfree (this->data_buf);
-+out_ior:
-+out:
-+	printk("NAND MTD Driver Init Success ......\n");
-+	return err;
-+}
-+
-+module_init(sl2312_mtd_init);
-+
-+/*
-+ * Clean up routine
-+ */
-+#ifdef MODULE
-+static void __exit sl2312_cleanup (void)
-+{
-+	struct nand_chip *this = (struct nand_chip *) &sl2312_mtd[1];
-+
-+	/* Unregister partitions */
-+	del_mtd_partitions(sl2312_mtd);
-+
-+	/* Unregister the device */
-+	del_mtd_device (sl2312_mtd);
-+
-+	/* Free internal data buffers */
-+	kfree (this->data_buf);
-+
-+	/* Free the MTD device structure */
-+	kfree (sl2312_mtd);
-+}
-+module_exit(sl2312_cleanup);
-+#endif
-+
-+MODULE_LICENSE("GPL");
-+MODULE_AUTHOR("Alice Hennessy ");
-+MODULE_DESCRIPTION("Glue layer for SmartMediaCard on Toshiba RBsl2312");
---- /dev/null
-+++ b/drivers/mtd/nand/sl2312-flash-nand.h
-@@ -0,0 +1,24 @@
-+#ifndef SL2312_FLASH_NAND_H
-+#define SL2312_FLASH_NAND_H
-+
-+#include 
-+#include 
-+
-+/*Add function*/
-+static void nand_read_id(int chip_no,unsigned char *id);
-+
-+
-+
-+#define	NFLASH_WiDTH8              0x00000000
-+#define	NFLASH_WiDTH16             0x00000400
-+#define	NFLASH_WiDTH32             0x00000800
-+#define NFLASH_CHIP0_EN            0x00000000  // 16th bit = 0
-+#define NFLASH_CHIP1_EN            0x00010000  // 16th bit = 1
-+#define	NFLASH_DIRECT              0x00004000
-+#define	NFLASH_INDIRECT            0x00000000
-+
-+
-+#define	DWIDTH             NFLASH_WiDTH8
-+
-+
-+#endif /* SL2312_FLASH_NAND_H */
---- /dev/null
-+++ b/include/linux/mtd/kvctl.h
-@@ -0,0 +1,40 @@
-+#ifndef KVCTL_H
-+#define KVCTL_H
-+
-+#define VCTL_HEAD_SIZE	8
-+#define VCTL_ENTRY_LEN	20
-+
-+typedef struct
-+{
-+  char header[4];
-+  unsigned int entry_num;
-+} vctl_mheader;
-+
-+typedef struct
-+{
-+  char header[4];
-+  unsigned int size;
-+  unsigned int type;
-+  char majorver[4];
-+  char minorver[4];
-+  unsigned char *payload;
-+} vctl_entry;
-+
-+typedef struct
-+{
-+  unsigned char mac[6];
-+  unsigned char vlanid;
-+  unsigned char vlanmap;
-+} vlaninfo;
-+
-+#define VCT_VENDORSPEC		0
-+#define VCT_BOOTLOADER		1
-+#define VCT_KERNEL		2
-+#define VCT_VERCTL		3
-+#define VCT_CURRCONF		4
-+#define VCT_DEFAULTCONF		5
-+#define VCT_ROOTFS		6
-+#define VCT_APP			7
-+#define VCT_VLAN		8
-+
-+#endif
---- a/drivers/mtd/maps/Makefile
-+++ b/drivers/mtd/maps/Makefile
-@@ -71,3 +71,7 @@
- obj-$(CONFIG_MTD_OMAP_NOR)	+= omap_nor.o
- obj-$(CONFIG_MTD_MTX1)		+= mtx-1_flash.o
- obj-$(CONFIG_MTD_TQM834x)	+= tqm834x.o
-+###### for Storlink Soc #######
-+obj-$(CONFIG_MTD_SL2312_CFI) += sl2312-flash-cfi.o
-+obj-$(CONFIG_MTD_SL2312_SERIAL_ATMEL) += sl2312-flash-atmel.o
-+obj-$(CONFIG_MTD_SL2312_SERIAL_ST) += sl2312-flash-m25p80.o
diff --git a/target/linux/storm/patches/1021-serial.patch b/target/linux/storm/patches/1021-serial.patch
deleted file mode 100644
index b7009af251..0000000000
--- a/target/linux/storm/patches/1021-serial.patch
+++ /dev/null
@@ -1,2809 +0,0 @@
---- /dev/null
-+++ b/drivers/serial/it8712.c
-@@ -0,0 +1,858 @@
-+/*
-+ *  linux/drivers/char/serial_uart00.c
-+ *
-+ *  Driver for UART00 serial ports
-+ *
-+ *  Based on drivers/char/serial_amba.c, by ARM Limited &
-+ *                                          Deep Blue Solutions Ltd.
-+ *  Copyright 2001 Altera Corporation
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
-+ *
-+ *  $Id: it8712.c,v 1.2 2006/06/06 06:36:04 middle Exp $
-+ *
-+ */
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+
-+#if defined(CONFIG_SERIAL_IT8712_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
-+#define SUPPORT_SYSRQ
-+#endif
-+
-+#include 
-+#include 
-+#include 
-+#include 
-+#include "it8712.h"
-+
-+//#define DEBUG           1
-+#define UART_NR		1
-+
-+#define SERIAL_IT8712_NAME	"ttySI"
-+#define SERIAL_IT8712_MAJOR	204
-+#define SERIAL_IT8712_MINOR	41      /* Temporary - will change in future */
-+#define SERIAL_IT8712_NR	UART_NR
-+#define UART_PORT_SIZE 0x50
-+#define LPC_HOST_CONTINUE_MODE	0x00000040
-+
-+#define IT8712_NO_PORTS         UART_NR
-+#define IT8712_ISR_PASS_LIMIT	256
-+
-+#define LPC_BUS_CTRL	*(unsigned int*)(IO_ADDRESS(SL2312_LPC_HOST_BASE + 4))
-+#define LPC_BUS_STATUS	*(unsigned int*)(IO_ADDRESS(SL2312_LPC_HOST_BASE + 4))
-+#define LPC_SERIAL_IRQ_CTRL	*(unsigned int*)(IO_ADDRESS(SL2312_LPC_HOST_BASE + 8))
-+#define LPC_SERIAL_IRQ_STATUS	*(unsigned int*)(IO_ADDRESS(SL2312_LPC_HOST_BASE + 0x0c))
-+#define LPC_SERIAL_IRQ_TRITYPE *(unsigned int*)(IO_ADDRESS(SL2312_LPC_HOST_BASE + 0x10))
-+#define LPC_SERIAL_IRQ_POLARITY	*(unsigned int*)(IO_ADDRESS(SL2312_LPC_HOST_BASE + 0x14))
-+#define LPC_SERIAL_IRQ_ENABLE	*(unsigned int*)(IO_ADDRESS(SL2312_LPC_HOST_BASE + 0x18))
-+
-+
-+
-+
-+/*
-+ * Access macros for the SL2312 UARTs
-+ */
-+#define UART_GET_INT_STATUS(p)	(inb(((p)->membase+UART_IIR)) & 0x0F)  // interrupt identification
-+#define UART_PUT_IER(p, c)      outb(c,((p)->membase+UART_IER))         // interrupt enable
-+#define UART_GET_IER(p)         inb(((p)->membase+UART_IER))
-+#define UART_PUT_CHAR(p, c)     outb(c,((p)->membase+UART_TX))         // transmitter holding
-+#define UART_GET_CHAR(p)        inb(((p)->membase+UART_RX))            // receive buffer
-+#define UART_GET_LSR(p)         inb(((p)->membase+UART_LSR))            // line status
-+#define UART_GET_MSR(p)         inb(((p)->membase+UART_MSR))            // modem status
-+#define UART_GET_MCR(p)         inb(((p)->membase+UART_MCR))            // modem control
-+#define UART_PUT_MCR(p, c)      outb(c,((p)->membase+UART_MCR))
-+#define UART_GET_LCR(p)         inb(((p)->membase+UART_LCR))       // mode control
-+#define UART_PUT_LCR(p, c)      outb(c,((p)->membase+UART_LCR))
-+#define UART_PUT_FCR(p, c)      outb(c,((p)->membase+UART_FCR))       // fifo control
-+#define UART_GET_DIV_HI(p)	inb(((p)->membase+UART_DLM))
-+#define UART_PUT_DIV_HI(p, c)	outb(c,((p)->membase+UART_DLM))
-+#define UART_GET_DIV_LO(p)	inb(((p)->membase+UART_DLL))
-+#define UART_PUT_DIV_LO(p, c)	outb(c,((p)->membase+UART_DLL))
-+#define UART_PUT_MDR(p, c)      outb(c,UART_MDR((p)->membase))
-+#define UART_RX_DATA(s)		((s) & UART_LSR_DR)
-+#define UART_TX_READY(s)	((s) & UART_LSR_THRE)
-+
-+static void it8712_stop_tx(struct uart_port *port, u_int from_tty)
-+{
-+        unsigned int reg;
-+
-+        //printk("it8712 stop tx : \n");
-+        reg = UART_GET_IER(port);
-+        reg &= ~(UART_IER_THRI);
-+	UART_PUT_IER(port, reg);
-+}
-+
-+static void it8712_stop_rx(struct uart_port *port)
-+{
-+        unsigned int reg;
-+
-+        //printk("it8712 stop rx : \n");
-+        reg = UART_GET_IER(port);
-+        reg &= ~(UART_IER_RDI);
-+	UART_PUT_IER(port, reg);
-+
-+}
-+
-+static void it8712_enable_ms(struct uart_port *port)
-+{
-+        unsigned int reg;
-+
-+        //printk("it8712 enable ms : \n");
-+
-+        reg = UART_GET_IER(port);
-+        reg |= (UART_IER_MSI);
-+	UART_PUT_IER(port, reg);
-+
-+}
-+
-+static void it8712_rx_chars(struct uart_port *port, struct pt_regs *regs)
-+{
-+	struct tty_struct *tty = port->info->tty;
-+	unsigned int status, mask, ch, flg, ignored = 0;
-+
-+ //       printk("it8712_rx_chars : \n");
-+	status = UART_GET_LSR(port);
-+	while (UART_RX_DATA(status)) {
-+
-+		/*
-+		 * We need to read rds before reading the
-+		 * character from the fifo
-+		 */
-+		ch = UART_GET_CHAR(port);
-+		port->icount.rx++;
-+
-+		if (tty->flip.count >= TTY_FLIPBUF_SIZE)
-+			goto ignore_char;
-+
-+		flg = TTY_NORMAL;
-+
-+		/*
-+		 * Note that the error handling code is
-+		 * out of the main execution path
-+		 */
-+
-+		if (status & (UART_LSR_OE|UART_LSR_PE|UART_LSR_FE|UART_LSR_BI|UART_LSR_DE))
-+			goto handle_error;
-+		if (uart_handle_sysrq_char(port, ch, regs))
-+			goto ignore_char;
-+
-+	error_return:
-+		*tty->flip.flag_buf_ptr++ = flg;
-+		*tty->flip.char_buf_ptr++ = ch;
-+		tty->flip.count++;
-+	ignore_char:
-+		status = UART_GET_LSR(port);
-+	} // end of while
-+out:
-+	tty_flip_buffer_push(tty);
-+	return;
-+
-+handle_error:
-+	if (status & UART_LSR_BI) {
-+		status &= ~(UART_LSR_FE);
-+		port->icount.brk++;
-+
-+#ifdef SUPPORT_SYSRQ
-+		if (uart_handle_break(port))
-+			goto ignore_char;
-+#endif
-+	} else if (status & UART_LSR_PE)
-+		port->icount.parity++;
-+	else if (status & UART_LSR_FE)
-+		port->icount.frame++;
-+
-+	if (status & UART_LSR_OE)
-+		port->icount.overrun++;
-+
-+	if (status & port->ignore_status_mask) {
-+		if (++ignored > 100)
-+			goto out;
-+		goto ignore_char;
-+	}
-+
-+	mask = status & port->read_status_mask;
-+
-+	if (mask & UART_LSR_BI)
-+		flg = TTY_BREAK;
-+	else if (mask & UART_LSR_PE)
-+		flg = TTY_PARITY;
-+	else if (mask & UART_LSR_FE)
-+		flg = TTY_FRAME;
-+
-+	if (status & UART_LSR_OE) {
-+		/*
-+		 * CHECK: does overrun affect the current character?
-+		 * ASSUMPTION: it does not.
-+		 */
-+		*tty->flip.flag_buf_ptr++ = flg;
-+		*tty->flip.char_buf_ptr++ = ch;
-+		tty->flip.count++;
-+		if (tty->flip.count >= TTY_FLIPBUF_SIZE)
-+			goto ignore_char;
-+		ch = 0;
-+		flg = TTY_OVERRUN;
-+	}
-+#ifdef SUPPORT_SYSRQ
-+	port->sysrq = 0;
-+#endif
-+	goto error_return;
-+}
-+
-+static void it8712_tx_chars(struct uart_port *port)
-+{
-+        struct circ_buf *xmit = &port->info->xmit;
-+	int count;
-+
-+	if (port->x_char) {
-+		while(!(UART_GET_LSR(port)&UART_LSR_THRE));
-+		UART_PUT_CHAR(port, port->x_char);
-+		port->icount.tx++;
-+		port->x_char = 0;
-+
-+		return;
-+	}
-+	if (uart_circ_empty(xmit) || uart_tx_stopped(port)) {
-+		it8712_stop_tx(port, 0);
-+		return;
-+	}
-+
-+	count = port->fifosize >> 1;
-+	do {
-+		while(!(UART_GET_LSR(port)&UART_LSR_THRE));
-+		UART_PUT_CHAR(port, xmit->buf[xmit->tail]);
-+		xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
-+		port->icount.tx++;
-+		if (uart_circ_empty(xmit))
-+			break;
-+	} while (--count > 0);
-+
-+	if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
-+		uart_write_wakeup(port);
-+
-+	if (uart_circ_empty(xmit))
-+		it8712_stop_tx(port, 0);
-+}
-+
-+static void it8712_start_tx(struct uart_port *port, unsigned int tty_start)
-+{
-+        unsigned int reg;
-+
-+        //printk("it8712 start tx : \n");
-+        reg = UART_GET_IER(port);
-+        reg |= (UART_IER_THRI);
-+	UART_PUT_IER(port, reg);
-+	it8712_tx_chars(port);
-+}
-+
-+static void it8712_modem_status(struct uart_port *port)
-+{
-+	unsigned int status;
-+
-+//        printk("it8712 modem status : \n");
-+
-+	status = UART_GET_MSR(port);
-+
-+	if (!(status & (UART_MSR_DCTS | UART_MSR_DDSR |
-+		       UART_MSR_TERI | UART_MSR_DDCD)))
-+		return;
-+
-+        if (status & UART_MSR_DDCD)
-+                uart_handle_dcd_change(port, status & UART_MSR_DCD);
-+
-+        if (status & UART_MSR_DDSR)
-+                port->icount.dsr++;
-+
-+        if (status & UART_MSR_DCTS)
-+                uart_handle_cts_change(port, status & UART_MSR_CTS);
-+
-+	wake_up_interruptible(&port->info->delta_msr_wait);
-+
-+}
-+
-+static irqreturn_t  it8712_int(int irq, void *dev_id, struct pt_regs *regs)
-+{
-+	struct uart_port *port = dev_id;
-+	unsigned int status, pass_counter = 0, data;
-+
-+
-+		data = LPC_SERIAL_IRQ_STATUS;
-+	if((data&0x10)==0x10)
-+	{
-+		status = UART_GET_INT_STATUS(port);
-+		do {
-+//			     printk("it8712_int: status %x \n", status);
-+			switch(status)
-+			{
-+			   case UART_IIR_RDI:
-+			   case UART_IIR_RLSI:
-+			   case UART_IIR_RCTO:
-+				it8712_rx_chars(port, regs);
-+			   break;
-+			   case UART_IIR_THRI:
-+				it8712_tx_chars(port);
-+			   break;
-+			   case UART_IIR_MSI:
-+				it8712_modem_status(port);
-+			   break;
-+			   default:
-+			   break;
-+			}
-+			if (pass_counter++ > IT8712_ISR_PASS_LIMIT)
-+				break;
-+
-+			status = UART_GET_INT_STATUS(port);
-+		} while (status);
-+	}
-+
-+		status = 0;
-+        status |= (IRQ_LPC_MASK);
-+        *((volatile unsigned int *)IRQ_CLEAR(IO_ADDRESS(SL2312_INTERRUPT_BASE))) = status;
-+
-+	//cnt=0;
-+	//do{
-+	//	data = LPC_SERIAL_IRQ_STATUS;
-+		LPC_SERIAL_IRQ_STATUS = data;
-+	//	cnt++;
-+	//}while(data);
-+	//if(cnt>2)
-+	//	printf("it8712_uart_Isr clear LPC_SERIAL_IRQ_STATUS %x \n", cnt);
-+        return IRQ_HANDLED;
-+}
-+
-+static u_int it8712_tx_empty(struct uart_port *port)
-+{
-+//        printk("it8712 tx empty : \n");
-+
-+	return ((UART_GET_LSR(port) & UART_LSR_THRE)? TIOCSER_TEMT : 0);
-+}
-+
-+static u_int it8712_get_mctrl(struct uart_port *port)
-+{
-+	unsigned int result = 0;
-+	unsigned int status;
-+
-+//        printk("it8712 get mctrl : \n");
-+
-+	status = UART_GET_MSR(port);
-+	if (status & UART_MSR_DCD)
-+		result |= TIOCM_CAR;
-+	if (status & UART_MSR_DSR)
-+		result |= TIOCM_DSR;
-+	if (status & UART_MSR_CTS)
-+		result |= TIOCM_CTS;
-+	if (status & UART_MSR_RI)
-+		result |= TIOCM_RI;
-+
-+	return result;
-+}
-+
-+static void it8712_set_mctrl_null(struct uart_port *port, u_int mctrl)
-+{
-+}
-+
-+static void it8712_break_ctl(struct uart_port *port, int break_state)
-+{
-+	unsigned int lcr;
-+
-+//        printk("it8712 break ctl : \n");
-+
-+	lcr = UART_GET_LCR(port);
-+	if (break_state == -1)
-+		lcr |= UART_LCR_SBC;
-+	else
-+		lcr &= ~UART_LCR_SBC;
-+	UART_PUT_LCR(port, lcr);
-+}
-+
-+static inline u_int uart_calculate_quot(struct uart_port *port, u_int baud)
-+{
-+	u_int quot;
-+
-+	/* Special case: B0 rate */
-+	if (!baud)
-+		baud = 9600;
-+
-+	quot = (port->uartclk/(16 * baud)) ;
-+
-+	return quot;
-+}
-+static void it8712_set_termios(struct uart_port *port, struct termios *termios,
-+                               struct termios *old)
-+{
-+	unsigned int  uart_mc, old_ier, baud, quot;
-+	unsigned long flags;
-+
-+        termios->c_cflag |= CREAD;
-+        termios->c_cflag |= CLOCAL;
-+#ifdef DEBUG
-+	printk("it8712_set_cflag(0x%x) called\n", cflag);
-+#endif
-+        baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16);
-+        quot = uart_get_divisor(port, baud);
-+
-+	/* byte size and parity */
-+	switch (termios->c_cflag & CSIZE) {
-+	case CS5:
-+              uart_mc = UART_LCR_WLEN5;
-+              break;
-+	case CS6:
-+              uart_mc = UART_LCR_WLEN6;
-+              break;
-+	case CS7:
-+              uart_mc = UART_LCR_WLEN7;
-+              break;
-+	default: // CS8
-+              uart_mc = UART_LCR_WLEN8;
-+              break;
-+	}
-+
-+	if (termios->c_cflag & CSTOPB)
-+		uart_mc|= UART_LCR_STOP;
-+	if (termios->c_cflag & PARENB) {
-+		uart_mc |= UART_LCR_EVEN;
-+		if (!(termios->c_cflag & PARODD))
-+			uart_mc |= UART_LCR_ODD;
-+	}
-+
-+        spin_lock_irqsave(&port->lock, flags);
-+        /*
-+         * Update the per-port timeout
-+         */
-+        uart_update_timeout(port, termios->c_cflag, baud);
-+	port->read_status_mask = UART_LSR_OE;
-+	if (termios->c_iflag & INPCK)
-+		port->read_status_mask |= UART_LSR_FE | UART_LSR_PE;
-+	if (termios->c_iflag & (BRKINT | PARMRK))
-+		port->read_status_mask |= UART_LSR_BI;
-+
-+	/*
-+	 * Characters to ignore
-+	 */
-+	port->ignore_status_mask = 0;
-+	if (termios->c_iflag & IGNPAR)
-+		port->ignore_status_mask |= UART_LSR_FE | UART_LSR_PE;
-+	if (termios->c_iflag & IGNBRK) {
-+		port->ignore_status_mask |= UART_LSR_BI;
-+		/*
-+		 * If we're ignoring parity and break indicators,
-+		 * ignore overruns to (for real raw support).
-+		 */
-+		if (termios->c_iflag & IGNPAR)
-+			port->ignore_status_mask |= UART_LSR_OE;
-+	}
-+
-+	old_ier = UART_GET_IER(port);
-+
-+        if(UART_ENABLE_MS(port, termios->c_cflag))
-+             old_ier |= UART_IER_MSI;
-+
-+	/* Set baud rate */
-+	quot = quot / 13;
-+	UART_PUT_LCR(port, UART_LCR_DLAB);
-+	UART_PUT_DIV_LO(port, (quot & 0xff));
-+	UART_PUT_DIV_HI(port, ((quot & 0xf00) >> 8));
-+
-+	UART_PUT_LCR(port, uart_mc);
-+//	UART_PUT_LCR(port, 0x07); // ???? it is wired
-+        UART_PUT_MCR(port, 0x08);
-+        UART_PUT_FCR(port, 0x01);
-+	UART_PUT_IER(port, 0x07);
-+
-+	spin_unlock_irqrestore(&port->lock, flags);
-+}
-+
-+static int it8712_startup(struct uart_port *port)
-+{
-+	int retval, i;
-+	unsigned int regs;
-+
-+        //printk("it8712 startup : \n");
-+
-+	/*
-+	 * Use iobase to store a pointer to info. We need this to start a
-+	 * transmission as the tranmittr interrupt is only generated on
-+	 * the transition to the idle state
-+	 */
-+
-+	//	regs = 0;
-+    //    regs |= (IRQ_LPC_MASK);
-+    //    *((volatile unsigned int *)IRQ_CLEAR(IO_ADDRESS(SL2312_INTERRUPT_BASE))) = regs;
-+
-+	/*
-+	 * Allocate the IRQ
-+	 */
-+	retval = request_irq(port->irq, it8712_int, SA_INTERRUPT, "it8712", port);
-+	if (retval)
-+		return retval;
-+
-+	//printk("Init LPC int...........\n");
-+        /* setup interrupt controller  */
-+        regs = *((volatile unsigned int *)IRQ_TMODE(IO_ADDRESS(SL2312_INTERRUPT_BASE)));
-+        regs &= ~(IRQ_LPC_MASK);
-+        *((volatile unsigned int *)IRQ_TMODE(IO_ADDRESS(SL2312_INTERRUPT_BASE))) = regs;
-+        regs = *((volatile unsigned int *)IRQ_TLEVEL(IO_ADDRESS(SL2312_INTERRUPT_BASE)));
-+        regs &= ~(IRQ_LPC_MASK);
-+        *((volatile unsigned int *)IRQ_TLEVEL(IO_ADDRESS(SL2312_INTERRUPT_BASE))) = regs;
-+        *((volatile unsigned int *)IRQ_MASK(IO_ADDRESS(SL2312_INTERRUPT_BASE))) |= (unsigned int)(IRQ_LPC_MASK);
-+
-+	LPC_SERIAL_IRQ_POLARITY = 0x10; //0x10; //0x02;
-+	LPC_SERIAL_IRQ_TRITYPE = 0x10; //0x10;//
-+	LPC_SERIAL_IRQ_ENABLE = 0x10;
-+
-+	LPC_BUS_CTRL = 0xc0;
-+	LPC_SERIAL_IRQ_CTRL = 0xc0;
-+	for(i=0;i<1000;i++) ;
-+	LPC_SERIAL_IRQ_CTRL = 0x80;
-+	/*
-+	 * Finally, enable interrupts. Use the TII interrupt to minimise
-+	 * the number of interrupts generated. If higher performance is
-+	 * needed, consider using the TI interrupt with a suitable FIFO
-+	 * threshold
-+	 */
-+	//UART_PUT_IER(port, (UART_IER_RDI|UART_IER_THRI));
-+	UART_PUT_IER(port, (UART_IER_RDI|UART_IER_THRI|UART_IER_RLSI));//middle
-+
-+	return 0;
-+}
-+
-+static void it8712_shutdown(struct uart_port *port)
-+{
-+        //printk("it8712 shutdown : \n");
-+
-+	/*
-+	 * disable all interrupts, disable the port
-+	 */
-+	UART_PUT_IER(port, 0x0);
-+
-+	/* disable break condition and fifos */
-+//	UART_PUT_MCR(port, (UART_GET_MCR(port)&UART_MCR_MASK));
-+
-+	/*
-+	 * Free the interrupt
-+	 */
-+	free_irq(port->irq, port);
-+}
-+
-+static const char *it8712_type(struct uart_port *port)
-+{
-+	return port->type == PORT_IT8712 ? "IT8712" : NULL;
-+}
-+
-+/*
-+ * Release the memory region(s) being used by 'port'
-+ */
-+static void it8712_release_port(struct uart_port *port)
-+{
-+//        printk("it8712 release port : \n");
-+
-+	release_mem_region(port->mapbase, UART_PORT_SIZE);
-+}
-+
-+/*
-+ * Request the memory region(s) being used by 'port'
-+ */
-+static int it8712_request_port(struct uart_port *port)
-+{
-+	return request_mem_region(port->mapbase, UART_PORT_SIZE,
-+				    "serial_it8712") != NULL ? 0 : -EBUSY;
-+}
-+
-+/*
-+ * Configure/autoconfigure the port.
-+ */
-+static void it8712_config_port(struct uart_port *port, int flags)
-+{
-+
-+	if (flags & UART_CONFIG_TYPE) {
-+		if (it8712_request_port(port) == 0)
-+			port->type = PORT_IT8712;
-+	}
-+}
-+
-+/*
-+ * verify the new serial_struct (for TIOCSSERIAL).
-+ */
-+static int it8712_verify_port(struct uart_port *port, struct serial_struct *ser)
-+{
-+	int ret = 0;
-+
-+	if (ser->type != PORT_UNKNOWN && ser->type != PORT_UART00)
-+		ret = -EINVAL;
-+	if (ser->irq < 0 || ser->irq >= NR_IRQS)
-+		ret = -EINVAL;
-+	if (ser->baud_base < 9600)
-+		ret = -EINVAL;
-+	return ret;
-+}
-+
-+static struct uart_ops it8712_pops = {
-+	.tx_empty	= it8712_tx_empty,
-+	.set_mctrl	= it8712_set_mctrl_null,
-+	.get_mctrl	= it8712_get_mctrl,
-+	.stop_tx	= it8712_stop_tx,
-+	.start_tx	= it8712_start_tx,
-+	.stop_rx	= it8712_stop_rx,
-+	.enable_ms	= it8712_enable_ms,
-+	.break_ctl	= it8712_break_ctl,
-+	.startup	= it8712_startup,
-+	.shutdown	= it8712_shutdown,
-+	.set_termios	= it8712_set_termios,
-+	.type		= it8712_type,
-+	.release_port	= it8712_release_port,
-+	.request_port	= it8712_request_port,
-+	.config_port	= it8712_config_port,
-+	.verify_port	= it8712_verify_port,
-+};
-+
-+#ifdef CONFIG_ARCH_SL2312
-+
-+static struct uart_port it8712_ports[UART_NR] = {
-+	{
-+		membase:	(void *)0,
-+		mapbase:	0,
-+		iotype:		SERIAL_IO_MEM,
-+		irq:		0,
-+		uartclk:	UART_CLK/2,
-+		fifosize:	16,
-+		ops:		&it8712_pops,
-+		flags:		ASYNC_BOOT_AUTOCONF,
-+	}
-+};
-+
-+#endif
-+
-+#ifdef CONFIG_SERIAL_IT8712_CONSOLE
-+#ifdef used_and_not_const_char_pointer
-+static int it8712_console_read(struct uart_port *port, char *s, u_int count)
-+{
-+	unsigned int status;
-+	int c;
-+#ifdef DEBUG
-+	printk("it8712_console_read() called\n");
-+#endif
-+
-+	c = 0;
-+	while (c < count) {
-+		status = UART_GET_LSR(port);
-+ 		if (UART_RX_DATA(status)) {
-+			*s++ = UART_GET_CHAR(port);
-+			c++;
-+		} else {
-+			// nothing more to get, return
-+			return c;
-+		}
-+	}
-+	// return the count
-+	return c;
-+}
-+#endif
-+static void it8712_console_write(struct console *co, const char *s, unsigned count)
-+{
-+#ifdef CONFIG_ARCH_SL2312
-+	struct uart_port *port = it8712_ports + co->index;
-+	unsigned int status, old_ies;
-+	int i;
-+
-+	/*
-+	 *	First save the CR then disable the interrupts
-+	 */
-+	old_ies = UART_GET_IER(port);
-+	//if(old_ies!=7)
-+	//{
-+	//
-+	//	printk("old_ies = %x\n",old_ies);
-+	//	old_ies = 7;
-+	//}
-+	UART_PUT_IER(port,0x0);
-+
-+	/*
-+	 *	Now, do each character
-+	 */
-+	for (i = 0; i < count; i++) {
-+		do {
-+			status = UART_GET_LSR(port);
-+		} while (!UART_TX_READY(status));
-+		UART_PUT_CHAR(port, s[i]);
-+		if (s[i] == '\n') {
-+			do {
-+				status = UART_GET_LSR(port);
-+			} while (!UART_TX_READY(status));
-+			UART_PUT_CHAR(port, '\r');
-+		}
-+	}
-+
-+	/*
-+	 *	Finally, wait for transmitter to become empty
-+	 *	and restore the IES
-+	 */
-+	do {
-+		status = UART_GET_LSR(port);
-+	} while (!(status&UART_LSR_THRE));
-+	UART_PUT_IER(port, old_ies);
-+#endif
-+}
-+
-+static void /*__init*/ it8712_console_get_options(struct uart_port *port, int *baud, int *parity, int *bits)
-+{
-+	//printk("it8712 console get options : \n");
-+
-+	u_int uart_mc, quot;
-+	uart_mc= UART_GET_MCR(port);
-+
-+	*parity = 'n';
-+	if (uart_mc & UART_LCR_PARITY) {
-+		if (uart_mc & UART_LCR_EVEN)
-+			*parity = 'e';
-+		else
-+			*parity = 'o';
-+	}
-+
-+	switch (uart_mc & UART_LCR_MSK){
-+
-+	case UART_LCR_WLEN5:
-+		*bits = 5;
-+		break;
-+	case UART_LCR_WLEN6:
-+		*bits = 6;
-+		break;
-+	case UART_LCR_WLEN7:
-+		*bits = 7;
-+		break;
-+	case UART_LCR_WLEN8:
-+		*bits = 8;
-+		break;
-+	}
-+	UART_PUT_MCR(port,UART_LCR_DLAB);
-+	quot = UART_GET_DIV_LO(port) | (UART_GET_DIV_HI(port) << 8);
-+	UART_PUT_MCR(port,uart_mc);
-+	*baud = (port->uartclk / (16 *quot));
-+}
-+
-+static int __init it8712_console_setup(struct console *co, char *options)
-+{
-+	struct uart_port *port;
-+	int baud = 38400;
-+	int bits = 8;
-+	int parity = 'n';
-+	int flow= 'n';
-+	int base;//, irq;
-+	int i ;
-+
-+	printk("it8712 console setup : \n");
-+
-+	LPCSetConfig(0, 0x02, 0x01);
-+        LPCSetConfig(LDN_SERIAL1, 0x30, 0x1);
-+        LPCSetConfig(LDN_SERIAL1, 0x23, 0x0);
-+	base = IT8712_IO_BASE;
-+	base += ((LPCGetConfig(LDN_SERIAL1, 0x60) << 8) + LPCGetConfig(LDN_SERIAL1, 0x61));
-+	it8712_ports[0].mapbase = base;
-+	it8712_ports[0].membase = (void *)IO_ADDRESS(base);
-+	it8712_ports[0].irq = IRQ_LPC_OFFSET;
-+    //   	irq = LPCGetConfig(LDN_SERIAL1, 0x70);
-+	//it8712_ports[0].irq += irq;
-+
-+	//printk("it8712 irq is %x \n", it8712_ports[0].irq);
-+
-+	// setup LPC Host 'quiet mode'
-+	//*((volatile unsigned int *)IO_ADDRESS((SL2312_LPC_HOST_BASE+0x04))) |= LPC_HOST_CONTINUE_MODE ;
-+	//for(i=0;i<1000;i++) ;						// delay
-+	//*((volatile unsigned int *)IO_ADDRESS((SL2312_LPC_HOST_BASE+0x04))) &= ~(LPC_HOST_CONTINUE_MODE) ;
-+	LPC_BUS_CTRL = 0xc0;
-+	LPC_SERIAL_IRQ_CTRL = 0xc0;
-+	for(i=0;i<1000;i++) ;
-+	LPC_SERIAL_IRQ_CTRL = 0x80;
-+
-+#ifdef CONFIG_ARCH_SL2312
-+	/*
-+	 * Check whether an invalid uart number has been specified, and
-+	 * if so, search for the first available port that does have
-+	 * console support.
-+	 */
-+	port = uart_get_console(it8712_ports,IT8712_NO_PORTS,co);
-+#else
-+	return -ENODEV;
-+#endif
-+
-+	if (options)
-+		uart_parse_options(options, &baud, &parity, &bits, &flow);
-+	else
-+		it8712_console_get_options(port, &baud, &parity, &bits);
-+
-+	return uart_set_options(port, co, baud, parity, bits, flow);
-+}
-+
-+extern struct uart_driver it8712_reg;
-+static struct console it8712_console = {
-+	.name           = SERIAL_IT8712_NAME,
-+	.write		= it8712_console_write,
-+	.device		= uart_console_device,
-+        .setup          = it8712_console_setup,
-+	.flags		= CON_PRINTBUFFER,
-+	.index		= 0,
-+        .data           = &it8712_reg,
-+};
-+
-+static int __init it8712_console_init(void)
-+{
-+	register_console(&it8712_console);
-+        return 0;
-+}
-+
-+console_initcall(it8712_console_init);
-+
-+#define IT8712_CONSOLE	&it8712_console
-+#else
-+#define IT8712_CONSOLE	NULL
-+#endif
-+
-+static struct uart_driver it8712_reg = {
-+	.owner                  = NULL,
-+	.driver_name		= SERIAL_IT8712_NAME,
-+	.dev_name		= SERIAL_IT8712_NAME,
-+        .major                  = SERIAL_IT8712_MAJOR,
-+	.minor			= SERIAL_IT8712_MINOR,
-+	.nr			= UART_NR,
-+	.cons			= IT8712_CONSOLE,
-+};
-+
-+static int __init it8712_init(void)
-+{
-+        int result;
-+	//printk("serial_it8712: it871212_init \n");
-+
-+
-+        result = uart_register_driver(&it8712_reg);
-+        if(result)
-+             return result;
-+	result = uart_add_one_port(&it8712_reg, &it8712_ports[0]);
-+
-+        return result;
-+
-+}
-+
-+
-+__initcall(it8712_init);
---- /dev/null
-+++ b/drivers/serial/it8712.h
-@@ -0,0 +1,135 @@
-+#define UART_RX		0	/* In:  Receive buffer (DLAB=0) */
-+#define UART_TX		0	/* Out: Transmit buffer (DLAB=0) */
-+#define UART_DLL	0	/* Out: Divisor Latch Low (DLAB=1) */
-+#define UART_TRG	0	/* (LCR=BF) FCTR bit 7 selects Rx or Tx
-+				 * In: Fifo count
-+				 * Out: Fifo custom trigger levels
-+				 * XR16C85x only */
-+
-+#define UART_DLM	1	/* Out: Divisor Latch High (DLAB=1) */
-+#define UART_IER	1	/* Out: Interrupt Enable Register */
-+#define UART_FCTR	1	/* (LCR=BF) Feature Control Register
-+				 * XR16C85x only */
-+
-+#define UART_IIR	2	/* In:  Interrupt ID Register */
-+#define UART_FCR	2	/* Out: FIFO Control Register */
-+#define UART_EFR	2	/* I/O: Extended Features Register */
-+				/* (DLAB=1, 16C660 only) */
-+
-+#define UART_LCR	3	/* Out: Line Control Register */
-+#define UART_MCR	4	/* Out: Modem Control Register */
-+#define UART_LSR	5	/* In:  Line Status Register */
-+#define UART_MSR	6	/* In:  Modem Status Register */
-+#define UART_SCR	7	/* I/O: Scratch Register */
-+#define UART_EMSR	7	/* (LCR=BF) Extended Mode Select Register
-+				 * FCTR bit 6 selects SCR or EMSR
-+				 * XR16c85x only */
-+
-+/*
-+ * These are the definitions for the FIFO Control Register
-+ * (16650 only)
-+ */
-+#define UART_FCR_ENABLE_FIFO	0x01 /* Enable the FIFO */
-+#define UART_FCR_CLEAR_RCVR	0x02 /* Clear the RCVR FIFO */
-+#define UART_FCR_CLEAR_XMIT	0x04 /* Clear the XMIT FIFO */
-+#define UART_FCR_DMA_SELECT	0x08 /* For DMA applications */
-+#define UART_FCR_TRIGGER_MASK	0xC0 /* Mask for the FIFO trigger range */
-+#define UART_FCR_TRIGGER_1	0x00 /* Mask for trigger set at 1 */
-+#define UART_FCR_TRIGGER_4	0x40 /* Mask for trigger set at 4 */
-+#define UART_FCR_TRIGGER_8	0x80 /* Mask for trigger set at 8 */
-+#define UART_FCR_TRIGGER_14	0xC0 /* Mask for trigger set at 14 */
-+/* 16650 redefinitions */
-+#define UART_FCR6_R_TRIGGER_8	0x00 /* Mask for receive trigger set at 1 */
-+#define UART_FCR6_R_TRIGGER_16	0x40 /* Mask for receive trigger set at 4 */
-+#define UART_FCR6_R_TRIGGER_24  0x80 /* Mask for receive trigger set at 8 */
-+#define UART_FCR6_R_TRIGGER_28	0xC0 /* Mask for receive trigger set at 14 */
-+#define UART_FCR6_T_TRIGGER_16	0x00 /* Mask for transmit trigger set at 16 */
-+#define UART_FCR6_T_TRIGGER_8	0x10 /* Mask for transmit trigger set at 8 */
-+#define UART_FCR6_T_TRIGGER_24  0x20 /* Mask for transmit trigger set at 24 */
-+#define UART_FCR6_T_TRIGGER_30	0x30 /* Mask for transmit trigger set at 30 */
-+/* TI 16750 definitions */
-+#define UART_FCR7_64BYTE	0x20 /* Go into 64 byte mode */
-+
-+/*
-+ * These are the definitions for the Line Control Register
-+ *
-+ * Note: if the word length is 5 bits (UART_LCR_WLEN5), then setting
-+ * UART_LCR_STOP will select 1.5 stop bits, not 2 stop bits.
-+ */
-+#define UART_LCR_DLAB	0x80	/* Divisor latch access bit */
-+#define UART_LCR_SBC	0x40	/* Set break control */
-+#define UART_LCR_SPAR	0x20	/* Stick parity (?) */
-+#define UART_LCR_EPAR	0x10	/* Even parity select */
-+#define UART_LCR_PARITY	0x08	/* Parity Enable */
-+#define UART_LCR_STOP	0x04	/* Stop bits: 0=1 stop bit, 1= 2 stop bits */
-+#define UART_LCR_WLEN5  0x00	/* Wordlength: 5 bits */
-+#define UART_LCR_WLEN6  0x01	/* Wordlength: 6 bits */
-+#define UART_LCR_WLEN7  0x02	/* Wordlength: 7 bits */
-+#define UART_LCR_WLEN8  0x03	/* Wordlength: 8 bits */
-+#define UART_LCR_EVEN   0x18    /* Even parity */
-+#define UART_LCR_ODD    0x08    /* Odd parity */
-+#define UART_LCR_MSK    0x03
-+/*
-+ * These are the definitions for the Line Status Register
-+ */
-+#define UART_LSR_DE     0x80    /* FIFO Data Error */
-+#define UART_LSR_TEMT	0x40	/* Transmitter empty */
-+#define UART_LSR_THRE	0x20	/* Transmit-hold-register empty */
-+#define UART_LSR_BI	0x10	/* Break interrupt indicator */
-+#define UART_LSR_FE	0x08	/* Frame error indicator */
-+#define UART_LSR_PE	0x04	/* Parity error indicator */
-+#define UART_LSR_OE	0x02	/* Overrun error indicator */
-+#define UART_LSR_DR	0x01	/* Receiver data ready */
-+
-+/*
-+ * These are the definitions for the Interrupt Identification Register
-+ */
-+#define UART_IIR_NO_INT	0x01	/* No interrupts pending */
-+#define UART_IIR_ID	0x06	/* Mask for the interrupt ID */
-+
-+#define UART_IIR_MSI	0x00	/* Modem status interrupt */
-+#define UART_IIR_THRI	0x02	/* Transmitter holding register empty */
-+#define UART_IIR_RDI	0x04	/* Receiver data interrupt */
-+#define UART_IIR_RLSI	0x06	/* Receiver line status interrupt */
-+#define UART_IIR_RCTO	0x0c	/* Receiver character timeout interrupt */
-+/*
-+ * These are the definitions for the Interrupt Enable Register
-+ */
-+#define UART_IER_MSI	0x08	/* Enable Modem status interrupt */
-+#define UART_IER_RLSI	0x04	/* Enable receiver line status interrupt */
-+#define UART_IER_THRI	0x02	/* Enable Transmitter holding register int. */
-+#define UART_IER_RDI	0x01	/* Enable receiver data interrupt */
-+/*
-+ * Sleep mode for ST16650 and TI16750.
-+ * Note that for 16650, EFR-bit 4 must be selected as well.
-+ */
-+#define UART_IERX_SLEEP  0x10	/* Enable sleep mode */
-+
-+/*
-+ * These are the definitions for the Modem Control Register
-+ */
-+#define UART_MCR_LOOP	0x10	/* Enable loopback test mode */
-+#define UART_MCR_OUT2	0x08	/* Out2 complement */
-+#define UART_MCR_OUT1	0x04	/* Out1 complement */
-+#define UART_MCR_RTS	0x02	/* RTS complement */
-+#define UART_MCR_DTR	0x01	/* DTR complement */
-+
-+/*
-+ * These are the definitions for the Modem Status Register
-+ */
-+#define UART_MSR_DCD	0x80	/* Data Carrier Detect */
-+#define UART_MSR_RI	0x40	/* Ring Indicator */
-+#define UART_MSR_DSR	0x20	/* Data Set Ready */
-+#define UART_MSR_CTS	0x10	/* Clear to Send */
-+#define UART_MSR_DDCD	0x08	/* Delta DCD */
-+#define UART_MSR_TERI	0x04	/* Trailing edge ring indicator */
-+#define UART_MSR_DDSR	0x02	/* Delta DSR */
-+#define UART_MSR_DCTS	0x01	/* Delta CTS */
-+#define UART_MSR_ANY_DELTA 0x0F	/* Any of the delta bits! */
-+
-+#define UART_PARITY_NONE	0x00
-+#define UART_PARITY_ODD		0x01
-+#define UART_PARITY_EVEN	0x02
-+
-+
-+
---- /dev/null
-+++ b/drivers/serial/serial_it8712.c
-@@ -0,0 +1,876 @@
-+/*
-+ *  linux/drivers/char/serial_uart00.c
-+ *
-+ *  Driver for UART00 serial ports
-+ *
-+ *  Based on drivers/char/serial_amba.c, by ARM Limited &
-+ *                                          Deep Blue Solutions Ltd.
-+ *  Copyright 2001 Altera Corporation
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
-+ *
-+ *  $Id: serial_it8712.c,v 1.1.1.1 2006/04/03 08:41:00 amos_lee Exp $
-+ *
-+ */
-+#include 
-+
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+
-+#if defined(CONFIG_SERIAL_IT8712_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
-+#define SUPPORT_SYSRQ
-+#endif
-+
-+#include 
-+#include 
-+#include 
-+#include 
-+#include "serial_it8712.h"
-+
-+//#define DEBUG           1
-+#define UART_NR		1
-+
-+#define SERIAL_IT8712_NAME	"ttySI"
-+#define SERIAL_IT8712_MAJOR	204
-+#define SERIAL_IT8712_MINOR	41      /* Temporary - will change in future */
-+#define SERIAL_IT8712_NR	UART_NR
-+#define UART_PORT_SIZE 0x50
-+
-+#define CALLOUT_IT8712_NAME	"cuaslI"
-+#define CALLOUT_IT8712_MAJOR	205
-+#define CALLOUT_IT8712_MINOR	41      /* Temporary - will change in future */
-+#define CALLOUT_IT8712_NR	UART_NR
-+#define LPC_HOST_CONTINUE_MODE	0x00000040
-+
-+#define IT8712_NO_PORTS         UART_NR
-+
-+static struct tty_driver normal, callout;
-+static struct tty_struct *it8712_table[UART_NR];
-+static struct termios *it8712_termios[UART_NR], *it8712_termios_locked[UART_NR];
-+static struct console it8712_console;
-+
-+#define IT8712_ISR_PASS_LIMIT	256
-+
-+/*
-+ * Access macros for the SL2312 UARTs
-+ */
-+#define UART_GET_INT_STATUS(p)	(inb(((p)->membase+UART_IIR)) & 0x0F)  // interrupt identification
-+#define UART_PUT_IER(p, c)      outb(c,((p)->membase+UART_IER))         // interrupt enable
-+#define UART_GET_IER(p)         inb(((p)->membase+UART_IER))
-+#define UART_PUT_CHAR(p, c)     outb(c,((p)->membase+UART_TX))         // transmitter holding
-+#define UART_GET_CHAR(p)        inb(((p)->membase+UART_RX))            // receive buffer
-+#define UART_GET_LSR(p)         inb(((p)->membase+UART_LSR))            // line status
-+#define UART_GET_MSR(p)         inb(((p)->membase+UART_MSR))            // modem status
-+#define UART_GET_MCR(p)         inb(((p)->membase+UART_MCR))            // modem control
-+#define UART_PUT_MCR(p, c)      outb(c,((p)->membase+UART_MCR))
-+#define UART_GET_LCR(p)         inb(((p)->membase+UART_LCR))       // mode control
-+#define UART_PUT_LCR(p, c)      outb(c,((p)->membase+UART_LCR))
-+#define UART_PUT_FCR(p, c)      outb(c,((p)->membase+UART_FCR))       // fifo control
-+#define UART_GET_DIV_HI(p)	inb(((p)->membase+UART_DLM))
-+#define UART_PUT_DIV_HI(p, c)	outb(c,((p)->membase+UART_DLM))
-+#define UART_GET_DIV_LO(p)	inb(((p)->membase+UART_DLL))
-+#define UART_PUT_DIV_LO(p, c)	outb(c,((p)->membase+UART_DLL))
-+#define UART_PUT_MDR(p, c)      outb(c,UART_MDR((p)->membase))
-+#define UART_RX_DATA(s)		((s) & UART_LSR_DR)
-+#define UART_TX_READY(s)	((s) & UART_LSR_THRE)
-+
-+static void it8712_stop_tx(struct uart_port *port, u_int from_tty)
-+{
-+        unsigned int reg;
-+
-+//        printk("it8712 stop tx : \n");
-+        reg = UART_GET_IER(port);
-+        reg &= ~(UART_IER_THRI);
-+	UART_PUT_IER(port, reg);
-+}
-+
-+static void it8712_stop_rx(struct uart_port *port)
-+{
-+        unsigned int reg;
-+
-+//        printk("it8712 stop rx : \n");
-+        reg = UART_GET_IER(port);
-+        reg &= ~(UART_IER_RDI);
-+	UART_PUT_IER(port, reg);
-+
-+}
-+
-+static void it8712_enable_ms(struct uart_port *port)
-+{
-+        unsigned int reg;
-+
-+//        printk("it8712 enable ms : \n");
-+
-+        reg = UART_GET_IER(port);
-+        reg |= (UART_IER_MSI);
-+	UART_PUT_IER(port, reg);
-+
-+}
-+
-+static void
-+it8712_rx_chars(struct uart_info *info, struct pt_regs *regs)
-+{
-+	struct tty_struct *tty = info->tty;
-+	unsigned int status, mask, ch, flg, ignored = 0;
-+	struct uart_port *port = info->port;
-+
-+ //       printk("it8712_rx_chars : \n");
-+	status = UART_GET_LSR(port);
-+	while (UART_RX_DATA(status)) {
-+
-+		/*
-+		 * We need to read rds before reading the
-+		 * character from the fifo
-+		 */
-+		ch = UART_GET_CHAR(port);
-+		port->icount.rx++;
-+
-+		if (tty->flip.count >= TTY_FLIPBUF_SIZE)
-+			goto ignore_char;
-+
-+		flg = TTY_NORMAL;
-+
-+		/*
-+		 * Note that the error handling code is
-+		 * out of the main execution path
-+		 */
-+
-+		if (status & (UART_LSR_OE|UART_LSR_PE|UART_LSR_FE|UART_LSR_BI|UART_LSR_DE))
-+			goto handle_error;
-+		if (uart_handle_sysrq_char(info, ch, regs))
-+			goto ignore_char;
-+
-+	error_return:
-+		*tty->flip.flag_buf_ptr++ = flg;
-+		*tty->flip.char_buf_ptr++ = ch;
-+		tty->flip.count++;
-+	ignore_char:
-+		status = UART_GET_LSR(port);
-+	} // end of while
-+out:
-+	tty_flip_buffer_push(tty);
-+	return;
-+
-+handle_error:
-+	if (status & UART_LSR_BI) {
-+		status &= ~(UART_LSR_FE);
-+		port->icount.brk++;
-+
-+#ifdef SUPPORT_SYSRQ
-+		if (uart_handle_break(info, &it8712_console))
-+			goto ignore_char;
-+#endif
-+	} else if (status & UART_LSR_PE)
-+		port->icount.parity++;
-+	else if (status & UART_LSR_FE)
-+		port->icount.frame++;
-+
-+	if (status & UART_LSR_OE)
-+		port->icount.overrun++;
-+
-+	if (status & port->ignore_status_mask) {
-+		if (++ignored > 100)
-+			goto out;
-+		goto ignore_char;
-+	}
-+
-+	mask = status & port->read_status_mask;
-+
-+	if (mask & UART_LSR_BI)
-+		flg = TTY_BREAK;
-+	else if (mask & UART_LSR_PE)
-+		flg = TTY_PARITY;
-+	else if (mask & UART_LSR_FE)
-+		flg = TTY_FRAME;
-+
-+	if (status & UART_LSR_OE) {
-+		/*
-+		 * CHECK: does overrun affect the current character?
-+		 * ASSUMPTION: it does not.
-+		 */
-+		*tty->flip.flag_buf_ptr++ = flg;
-+		*tty->flip.char_buf_ptr++ = ch;
-+		tty->flip.count++;
-+		if (tty->flip.count >= TTY_FLIPBUF_SIZE)
-+			goto ignore_char;
-+		ch = 0;
-+		flg = TTY_OVERRUN;
-+	}
-+#ifdef SUPPORT_SYSRQ
-+	info->sysrq = 0;
-+#endif
-+	goto error_return;
-+}
-+
-+static void it8712_tx_chars(struct uart_info *info)
-+{
-+	int count;
-+	struct uart_port *port=info->port;
-+
-+	if (port->x_char) {
-+		while(!(UART_GET_LSR(port)&UART_LSR_THRE));
-+		UART_PUT_CHAR(port, port->x_char);
-+		port->icount.tx++;
-+		port->x_char = 0;
-+
-+		return;
-+	}
-+	if (info->xmit.head == info->xmit.tail
-+	    || info->tty->stopped
-+	    || info->tty->hw_stopped) {
-+		it8712_stop_tx(info->port, 0);
-+		return;
-+	}
-+
-+	count = port->fifosize >> 1;
-+	do {
-+		while(!(UART_GET_LSR(port)&UART_LSR_THRE));
-+		UART_PUT_CHAR(port, info->xmit.buf[info->xmit.tail]);
-+		info->xmit.tail = (info->xmit.tail + 1) & (UART_XMIT_SIZE - 1);
-+		port->icount.tx++;
-+		if (info->xmit.head == info->xmit.tail)
-+			break;
-+	} while (--count > 0);
-+
-+	if (CIRC_CNT(info->xmit.head,
-+		     info->xmit.tail,
-+		     UART_XMIT_SIZE) < WAKEUP_CHARS)
-+		uart_event(info, EVT_WRITE_WAKEUP);
-+
-+	if (info->xmit.head == info->xmit.tail)
-+		it8712_stop_tx(info->port, 0);
-+}
-+
-+static void it8712_start_tx(struct uart_port *port, u_int nonempty, u_int from_tty)
-+{
-+        unsigned int reg;
-+	struct uart_info *info=(struct uart_info*)(port->iobase);
-+
-+//        printk("it8712 start tx : \n");
-+        reg = UART_GET_IER(port);
-+        reg |= (UART_IER_THRI);
-+	UART_PUT_IER(port, reg);
-+	it8712_tx_chars(info);
-+}
-+
-+static void it8712_modem_status(struct uart_info *info)
-+{
-+	unsigned int status;
-+	struct uart_icount *icount = &info->port->icount;
-+
-+//        printk("it8712 modem status : \n");
-+
-+	status = UART_GET_MSR(info->port);
-+
-+	if (!(status & (UART_MSR_DCTS | UART_MSR_DDSR |
-+		       UART_MSR_TERI | UART_MSR_DDCD)))
-+		return;
-+
-+	if (status & UART_MSR_DCD) {
-+		icount->dcd++;
-+#ifdef CONFIG_HARD_PPS
-+		if ((info->flags & ASYNC_HARDPPS_CD) &&
-+		    (status & UART_MSR_DCD_MSK))
-+			hardpps();
-+#endif
-+		if (info->flags & ASYNC_CHECK_CD) {
-+			if (status & UART_MSR_DCD)
-+				wake_up_interruptible(&info->open_wait);
-+			else if (!((info->flags & ASYNC_CALLOUT_ACTIVE) &&
-+				   (info->flags & ASYNC_CALLOUT_NOHUP))) {
-+				if (info->tty)
-+					tty_hangup(info->tty);
-+			}
-+		}
-+	}
-+
-+	if (status & UART_MSR_DDSR)
-+		icount->dsr++;
-+
-+	if (status & UART_MSR_DCTS) {
-+		icount->cts++;
-+
-+		if (info->flags & ASYNC_CTS_FLOW) {
-+			status &= UART_MSR_CTS;
-+
-+			if (info->tty->hw_stopped) {
-+				if (status) {
-+					info->tty->hw_stopped = 0;
-+					info->ops->start_tx(info->port, 1, 0);
-+					uart_event(info, EVT_WRITE_WAKEUP);
-+				}
-+			} else {
-+				if (!status) {
-+					info->tty->hw_stopped = 1;
-+					info->ops->stop_tx(info->port, 0);
-+				}
-+			}
-+		}
-+	}
-+	wake_up_interruptible(&info->delta_msr_wait);
-+
-+}
-+
-+static void it8712_int(int irq, void *dev_id, struct pt_regs *regs)
-+{
-+	struct uart_info *info = dev_id;
-+	unsigned int status, pass_counter = 0;
-+
-+	status = UART_GET_INT_STATUS(info->port);
-+	do {
-+//		     printk("it8712_int: status %x \n", status);
-+		switch(status)
-+		{
-+		   case UART_IIR_RDI:
-+		   case UART_IIR_RLSI:
-+		   case UART_IIR_RCTO:
-+			it8712_rx_chars(info, regs);
-+		   break;
-+		   case UART_IIR_THRI:
-+			it8712_tx_chars(info);
-+		   break;
-+		   case UART_IIR_MSI:
-+			it8712_modem_status(info);
-+		   break;
-+		   default:
-+		   break;
-+		}
-+		if (pass_counter++ > IT8712_ISR_PASS_LIMIT)
-+			break;
-+
-+		status = UART_GET_INT_STATUS(info->port);
-+	} while (status);
-+}
-+
-+static u_int it8712_tx_empty(struct uart_port *port)
-+{
-+//        printk("it8712 tx empty : \n");
-+
-+	return ((UART_GET_LSR(port) & UART_LSR_THRE)? TIOCSER_TEMT : 0);
-+}
-+
-+static u_int it8712_get_mctrl(struct uart_port *port)
-+{
-+	unsigned int result = 0;
-+	unsigned int status;
-+
-+//        printk("it8712 get mctrl : \n");
-+
-+	status = UART_GET_MSR(port);
-+	if (status & UART_MSR_DCD)
-+		result |= TIOCM_CAR;
-+	if (status & UART_MSR_DSR)
-+		result |= TIOCM_DSR;
-+	if (status & UART_MSR_CTS)
-+		result |= TIOCM_CTS;
-+	if (status & UART_MSR_RI)
-+		result |= TIOCM_RI;
-+
-+	return result;
-+}
-+
-+static void it8712_set_mctrl_null(struct uart_port *port, u_int mctrl)
-+{
-+}
-+
-+static void it8712_break_ctl(struct uart_port *port, int break_state)
-+{
-+	unsigned int lcr;
-+
-+//        printk("it8712 break ctl : \n");
-+
-+	lcr = UART_GET_LCR(port);
-+	if (break_state == -1)
-+		lcr |= UART_LCR_SBC;
-+	else
-+		lcr &= ~UART_LCR_SBC;
-+	UART_PUT_LCR(port, lcr);
-+}
-+
-+static inline u_int uart_calculate_quot(struct uart_info *info, u_int baud)
-+{
-+	u_int quot;
-+
-+	/* Special case: B0 rate */
-+	if (!baud)
-+		baud = 9600;
-+
-+	quot = (info->port->uartclk/(16 * baud)) ;
-+
-+	return quot;
-+}
-+static void it8712_change_speed(struct uart_port *port, u_int cflag, u_int iflag, u_int quot)
-+{
-+	u_int uart_mc=0, old_ier;
-+	unsigned long flags;
-+
-+#ifdef DEBUG
-+	printk("it8712_set_cflag(0x%x) called\n", cflag);
-+#endif
-+
-+
-+	/* byte size and parity */
-+	switch (cflag & CSIZE) {
-+	case CS5: uart_mc = UART_LCR_WLEN5; break;
-+	case CS6: uart_mc = UART_LCR_WLEN6; break;
-+	case CS7: uart_mc = UART_LCR_WLEN7; break;
-+	default:  uart_mc = UART_LCR_WLEN8; break; // CS8
-+	}
-+	if (cflag & CSTOPB)
-+		uart_mc|= UART_LCR_STOP;
-+	if (cflag & PARENB) {
-+		uart_mc |= UART_LCR_EVEN;
-+		if (!(cflag & PARODD))
-+			uart_mc |= UART_LCR_ODD;
-+	}
-+
-+	port->read_status_mask = UART_LSR_OE;
-+	if (iflag & INPCK)
-+		port->read_status_mask |= UART_LSR_FE | UART_LSR_PE;
-+	if (iflag & (BRKINT | PARMRK))
-+		port->read_status_mask |= UART_LSR_BI;
-+
-+	/*
-+	 * Characters to ignore
-+	 */
-+	port->ignore_status_mask = 0;
-+	if (iflag & IGNPAR)
-+		port->ignore_status_mask |= UART_LSR_FE | UART_LSR_PE;
-+	if (iflag & IGNBRK) {
-+		port->ignore_status_mask |= UART_LSR_BI;
-+		/*
-+		 * If we're ignoring parity and break indicators,
-+		 * ignore overruns to (for real raw support).
-+		 */
-+		if (iflag & IGNPAR)
-+			port->ignore_status_mask |= UART_LSR_OE;
-+	}
-+
-+	/* first, disable everything */
-+	save_flags(flags); cli();
-+	old_ier = UART_GET_IER(port);
-+
-+	if ((port->flags & ASYNC_HARDPPS_CD) ||
-+	    (cflag & CRTSCTS) || !(cflag & CLOCAL))
-+		old_ier |= UART_IER_MSI;
-+
-+	/* Set baud rate */
-+	quot = quot / 13;
-+	UART_PUT_LCR(port, UART_LCR_DLAB);
-+	UART_PUT_DIV_LO(port, (quot & 0xff));
-+	UART_PUT_DIV_HI(port, ((quot & 0xf00) >> 8));
-+
-+	UART_PUT_LCR(port, uart_mc);
-+//	UART_PUT_LCR(port, 0x07); // ???? it is wired
-+        UART_PUT_MCR(port, 0x08);
-+        UART_PUT_FCR(port, 0x01);
-+	UART_PUT_IER(port, 0x05);
-+
-+	restore_flags(flags);
-+}
-+
-+static int it8712_startup(struct uart_port *port, struct uart_info *info)
-+{
-+	int retval;
-+	unsigned int regs;
-+
-+//        printk("it8712 startup : \n");
-+
-+	/*
-+	 * Use iobase to store a pointer to info. We need this to start a
-+	 * transmission as the tranmittr interrupt is only generated on
-+	 * the transition to the idle state
-+	 */
-+
-+	port->iobase=(u_int)info;
-+
-+	/*
-+	 * Allocate the IRQ
-+	 */
-+	retval = request_irq(port->irq, it8712_int, SA_INTERRUPT, "it8712", info);
-+	if (retval)
-+		return retval;
-+
-+        /* setup interrupt controller  */
-+        regs = *((volatile unsigned int *)IRQ_TMODE(IO_ADDRESS(SL2312_INTERRUPT_BASE)));
-+        regs |= (IRQ_SERIRQ0_MASK);
-+        *((volatile unsigned int *)IRQ_TMODE(IO_ADDRESS(SL2312_INTERRUPT_BASE))) = regs;
-+        regs = *((volatile unsigned int *)IRQ_LEVEL(IO_ADDRESS(SL2312_INTERRUPT_BASE)));
-+        regs &= ~(IRQ_SERIRQ0_MASK);
-+        *((volatile unsigned int *)IRQ_LEVEL(IO_ADDRESS(SL2312_INTERRUPT_BASE))) = regs;
-+        *((volatile unsigned int *)IRQ_MASK(IO_ADDRESS(SL2312_INTERRUPT_BASE))) |= (unsigned int)(IRQ_SERIRQ0_MASK);
-+
-+	/*
-+	 * Finally, enable interrupts. Use the TII interrupt to minimise
-+	 * the number of interrupts generated. If higher performance is
-+	 * needed, consider using the TI interrupt with a suitable FIFO
-+	 * threshold
-+	 */
-+	UART_PUT_IER(port, (UART_IER_RDI|UART_IER_THRI));
-+
-+	return 0;
-+}
-+
-+static void it8712_shutdown(struct uart_port *port, struct uart_info *info)
-+{
-+//        printk("it8712 shutdown : \n");
-+
-+	/*
-+	 * disable all interrupts, disable the port
-+	 */
-+	UART_PUT_IER(port, 0x0);
-+
-+	/* disable break condition and fifos */
-+//	UART_PUT_MCR(port, (UART_GET_MCR(port)&UART_MCR_MASK));
-+
-+	/*
-+	 * Free the interrupt
-+	 */
-+	free_irq(port->irq, info);
-+}
-+
-+static const char *it8712_type(struct uart_port *port)
-+{
-+	return port->type == PORT_IT8712 ? "IT8712" : NULL;
-+}
-+
-+/*
-+ * Release the memory region(s) being used by 'port'
-+ */
-+static void it8712_release_port(struct uart_port *port)
-+{
-+//        printk("it8712 release port : \n");
-+
-+	release_mem_region(port->mapbase, UART_PORT_SIZE);
-+}
-+
-+/*
-+ * Request the memory region(s) being used by 'port'
-+ */
-+static int it8712_request_port(struct uart_port *port)
-+{
-+	return request_mem_region(port->mapbase, UART_PORT_SIZE,
-+				    "serial_it8712") != NULL ? 0 : -EBUSY;
-+}
-+
-+/*
-+ * Configure/autoconfigure the port.
-+ */
-+static void it8712_config_port(struct uart_port *port, int flags)
-+{
-+
-+	if (flags & UART_CONFIG_TYPE) {
-+		if (it8712_request_port(port) == 0)
-+			port->type = PORT_IT8712;
-+	}
-+}
-+
-+/*
-+ * verify the new serial_struct (for TIOCSSERIAL).
-+ */
-+static int it8712_verify_port(struct uart_port *port, struct serial_struct *ser)
-+{
-+	int ret = 0;
-+
-+	if (ser->type != PORT_UNKNOWN && ser->type != PORT_UART00)
-+		ret = -EINVAL;
-+	if (ser->irq < 0 || ser->irq >= NR_IRQS)
-+		ret = -EINVAL;
-+	if (ser->baud_base < 9600)
-+		ret = -EINVAL;
-+	return ret;
-+}
-+
-+static struct uart_ops it8712_pops = {
-+	tx_empty:	it8712_tx_empty,
-+	set_mctrl:	it8712_set_mctrl_null,
-+	get_mctrl:	it8712_get_mctrl,
-+	stop_tx:	it8712_stop_tx,
-+	start_tx:	it8712_start_tx,
-+	stop_rx:	it8712_stop_rx,
-+	enable_ms:	it8712_enable_ms,
-+	break_ctl:	it8712_break_ctl,
-+	startup:	it8712_startup,
-+	shutdown:	it8712_shutdown,
-+	change_speed:	it8712_change_speed,
-+	type:		it8712_type,
-+	release_port:	it8712_release_port,
-+	request_port:	it8712_request_port,
-+	config_port:	it8712_config_port,
-+	verify_port:	it8712_verify_port,
-+};
-+
-+#ifdef CONFIG_ARCH_SL2312
-+
-+static struct uart_port it8712_ports[UART_NR] = {
-+	{
-+		membase:	(void *)0,
-+		mapbase:	0,
-+		iotype:		SERIAL_IO_MEM,
-+		irq:		0,
-+		uartclk:	UART_CLK/2,
-+		fifosize:	16,
-+		ops:		&it8712_pops,
-+		flags:		ASYNC_BOOT_AUTOCONF,
-+	}
-+};
-+
-+#endif
-+
-+#ifdef CONFIG_SERIAL_IT8712_CONSOLE
-+#ifdef used_and_not_const_char_pointer
-+static int it8712_console_read(struct uart_port *port, char *s, u_int count)
-+{
-+	unsigned int status;
-+	int c;
-+#ifdef DEBUG
-+	printk("it8712_console_read() called\n");
-+#endif
-+
-+	c = 0;
-+	while (c < count) {
-+		status = UART_GET_LSR(port);
-+ 		if (UART_RX_DATA(status)) {
-+			*s++ = UART_GET_CHAR(port);
-+			c++;
-+		} else {
-+			// nothing more to get, return
-+			return c;
-+		}
-+	}
-+	// return the count
-+	return c;
-+}
-+#endif
-+static void it8712_console_write(struct console *co, const char *s, unsigned count)
-+{
-+#ifdef CONFIG_ARCH_SL2312
-+	struct uart_port *port = it8712_ports + co->index;
-+	unsigned int status, old_ies;
-+	int i;
-+
-+	/*
-+	 *	First save the CR then disable the interrupts
-+	 */
-+	old_ies = UART_GET_IER(port);
-+	UART_PUT_IER(port,0x0);
-+
-+	/*
-+	 *	Now, do each character
-+	 */
-+	for (i = 0; i < count; i++) {
-+		do {
-+			status = UART_GET_LSR(port);
-+		} while (!UART_TX_READY(status));
-+		UART_PUT_CHAR(port, s[i]);
-+		if (s[i] == '\n') {
-+			do {
-+				status = UART_GET_LSR(port);
-+			} while (!UART_TX_READY(status));
-+			UART_PUT_CHAR(port, '\r');
-+		}
-+	}
-+
-+	/*
-+	 *	Finally, wait for transmitter to become empty
-+	 *	and restore the IES
-+	 */
-+	do {
-+		status = UART_GET_LSR(port);
-+	} while (!(status&UART_LSR_THRE));
-+	UART_PUT_IER(port, old_ies);
-+#endif
-+}
-+
-+static kdev_t it8712_console_device(struct console *co)
-+{
-+	return MKDEV(SERIAL_IT8712_MAJOR, SERIAL_IT8712_MINOR + co->index);
-+}
-+
-+static int it8712_console_wait_key(struct console *co)
-+{
-+#ifdef CONFIG_ARCH_SL2312
-+	struct uart_port *port = (it8712_ports + co->index);
-+	unsigned int status;
-+
-+	do {
-+		status = UART_GET_LSR(port);
-+	} while (!UART_RX_DATA(status));
-+	return UART_GET_CHAR(port);
-+#else
-+	return 0;
-+#endif
-+}
-+
-+static void /*__init*/ it8712_console_get_options(struct uart_port *port, int *baud, int *parity, int *bits)
-+{
-+	printk("it8712 console get options : \n");
-+
-+	u_int uart_mc, quot;
-+	uart_mc= UART_GET_MCR(port);
-+
-+	*parity = 'n';
-+	if (uart_mc & UART_LCR_PARITY) {
-+		if (uart_mc & UART_LCR_EVEN)
-+			*parity = 'e';
-+		else
-+			*parity = 'o';
-+	}
-+
-+	switch (uart_mc & UART_LCR_MSK){
-+
-+	case UART_LCR_WLEN5:
-+		*bits = 5;
-+		break;
-+	case UART_LCR_WLEN6:
-+		*bits = 6;
-+		break;
-+	case UART_LCR_WLEN7:
-+		*bits = 7;
-+		break;
-+	case UART_LCR_WLEN8:
-+		*bits = 8;
-+		break;
-+	}
-+	UART_PUT_MCR(port,UART_LCR_DLAB);
-+	quot = UART_GET_DIV_LO(port) | (UART_GET_DIV_HI(port) << 8);
-+	UART_PUT_MCR(port,uart_mc);
-+	*baud = (port->uartclk / (16 *quot));
-+}
-+
-+static int __init it8712_console_setup(struct console *co, char *options)
-+{
-+	struct uart_port *port;
-+	int baud = 38400;
-+	int bits = 8;
-+	int parity = 'n';
-+	int flow= 'n';
-+	int base, irq;
-+	int i ;
-+
-+//	printk("it8712 console setup : \n");
-+
-+	LPCSetConfig(0, 0x02, 0x01);
-+        LPCSetConfig(LDN_SERIAL1, 0x30, 0x1);
-+        LPCSetConfig(LDN_SERIAL1, 0x23, 0x0);
-+	base = IT8712_IO_BASE;
-+	base += ((LPCGetConfig(LDN_SERIAL1, 0x60) << 8) + LPCGetConfig(LDN_SERIAL1, 0x61));
-+	it8712_ports[0].mapbase = base;
-+	it8712_ports[0].membase = IO_ADDRESS(base);
-+	it8712_ports[0].irq = IRQ_SERIRQ0_OFFSET;
-+       	irq = LPCGetConfig(LDN_SERIAL1, 0x70);
-+	it8712_ports[0].irq += irq;
-+
-+	printk("it8712 irq is %x %x \n", it8712_ports[0].irq, irq);
-+
-+	// setup LPC Host 'quiet mode'
-+	*((volatile unsigned int *)IO_ADDRESS((SL2312_LPC_HOST_BASE+0x04))) |= LPC_HOST_CONTINUE_MODE ;
-+	for(i=0;i<1000;i++) ;						// delay
-+	*((volatile unsigned int *)IO_ADDRESS((SL2312_LPC_HOST_BASE+0x04))) &= ~(LPC_HOST_CONTINUE_MODE) ;
-+
-+#ifdef CONFIG_ARCH_SL2312
-+	/*
-+	 * Check whether an invalid uart number has been specified, and
-+	 * if so, search for the first available port that does have
-+	 * console support.
-+	 */
-+	port = uart_get_console(it8712_ports,IT8712_NO_PORTS,co);
-+#else
-+	return -ENODEV;
-+#endif
-+
-+	if (options)
-+		uart_parse_options(options, &baud, &parity, &bits, &flow);
-+	else
-+		it8712_console_get_options(port, &baud, &parity, &bits);
-+
-+	return uart_set_options(port, co, baud, parity, bits, flow);
-+}
-+
-+static struct console it8712_console = {
-+	name:           SERIAL_IT8712_NAME,
-+	write:		it8712_console_write,
-+#ifdef used_and_not_const_char_pointer
-+	read:		it8712_console_read,
-+#endif
-+	device:		it8712_console_device,
-+//	wait_key:	it8712_console_wait_key,
-+	setup:		it8712_console_setup,
-+	flags:		(CON_PRINTBUFFER|CON_ENABLED),
-+	index:		-1,
-+};
-+
-+void __init it8712_console_init(void)
-+{
-+	register_console(&it8712_console);
-+}
-+
-+#define IT8712_CONSOLE	&it8712_console
-+#else
-+#define IT8712_CONSOLE	NULL
-+#endif
-+
-+static struct uart_driver it8712_reg = {
-+	owner:                  NULL,
-+	normal_major:		SERIAL_IT8712_MAJOR,
-+	normal_name:		SERIAL_IT8712_NAME,
-+	normal_driver:		&normal,
-+	callout_major:		CALLOUT_IT8712_MAJOR,
-+	callout_name:		CALLOUT_IT8712_NAME,
-+	callout_driver:		&callout,
-+	table:			it8712_table,
-+	termios:		it8712_termios,
-+	termios_locked:		it8712_termios_locked,
-+	minor:			SERIAL_IT8712_MINOR,
-+	nr:			UART_NR,
-+#ifdef CONFIG_ARCH_SL2312
-+	port:			it8712_ports,
-+#endif
-+	state:			NULL,
-+	cons:			IT8712_CONSOLE,
-+};
-+
-+static int __init it8712_init(void)
-+{
-+//	printk("serial_it8712: it871212_init \n");
-+
-+	return uart_register_driver(&it8712_reg);
-+}
-+
-+
-+__initcall(it8712_init);
---- /dev/null
-+++ b/drivers/serial/serial_sl2312.c
-@@ -0,0 +1,827 @@
-+/*
-+ *  linux/drivers/char/serial_uart00.c
-+ *
-+ *  Driver for UART00 serial ports
-+ *
-+ *  Based on drivers/char/serial_amba.c, by ARM Limited &
-+ *                                          Deep Blue Solutions Ltd.
-+ *  Copyright 2001 Altera Corporation
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
-+ *
-+ *  $Id: serial_sl2312.c,v 1.1.1.1 2006/04/03 08:41:00 amos_lee Exp $
-+ *
-+ */
-+#include 
-+
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+
-+
-+#if defined(CONFIG_SERIAL_SL2312_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
-+#define SUPPORT_SYSRQ
-+#endif
-+
-+#include 
-+#define UART_TYPE (volatile unsigned int*)
-+#include 
-+#include 
-+
-+// #define DEBUG           1
-+#define UART_NR		1
-+
-+
-+#define SERIAL_SL2312_NAME	"ttyS"
-+#define SERIAL_SL2312_MAJOR	204
-+#define SERIAL_SL2312_MINOR	40      /* Temporary - will change in future */
-+#define SERIAL_SL2312_NR	UART_NR
-+#define UART_PORT_SIZE 0x50
-+
-+#define SL2312_NO_PORTS         UART_NR
-+#define SL2312_ISR_PASS_LIMIT	256
-+
-+/*
-+ * Access macros for the SL2312 UARTs
-+ */
-+#define UART_GET_INT_STATUS(p)	(inl(UART_IIR((p)->membase)) & 0x0F)      // interrupt identification
-+#define UART_PUT_IER(p, c)      outl(c,UART_IER((p)->membase))    // interrupt enable
-+#define UART_GET_IER(p)         inl(UART_IER((p)->membase))
-+#define UART_PUT_CHAR(p, c)     outl(c,UART_THR((p)->membase))    // transmitter holding
-+#define UART_GET_CHAR(p)        inl(UART_RBR((p)->membase))       // receive buffer
-+#define UART_GET_LSR(p)         inl(UART_LSR((p)->membase))       // line status
-+#define UART_GET_MSR(p)         inl(UART_MSR((p)->membase))       // modem status
-+#define UART_GET_MCR(p)         inl(UART_MCR((p)->membase))       // modem control
-+#define UART_PUT_MCR(p, c)      outl(c,UART_MCR((p)->membase))
-+#define UART_GET_LCR(p)         inl(UART_LCR((p)->membase))       // mode control
-+#define UART_PUT_LCR(p, c)      outl(c,UART_LCR((p)->membase))
-+#define UART_GET_DIV_HI(p)	inl(UART_DIV_HI((p)->membase))
-+#define UART_PUT_DIV_HI(p, c)	outl(c,UART_DIV_HI((p)->membase))
-+#define UART_GET_DIV_LO(p)	inl(UART_DIV_LO((p)->membase))
-+#define UART_PUT_DIV_LO(p, c)	outl(c,UART_DIV_LO((p)->membase))
-+#define UART_PUT_MDR(p, c)      outl(c,UART_MDR((p)->membase))
-+#define UART_RX_DATA(s)		((s) & UART_LSR_DR)
-+#define UART_TX_READY(s)	((s) & UART_LSR_THRE)
-+
-+
-+static void sl2312_stop_tx(struct uart_port *port)
-+{
-+        unsigned int reg;
-+
-+//        printk("sl2312 stop tx : \n");
-+        reg = UART_GET_IER(port);
-+        reg &= ~(UART_IER_TE);
-+	UART_PUT_IER(port, reg);
-+}
-+
-+static void sl2312_stop_rx(struct uart_port *port)
-+{
-+        unsigned int reg;
-+
-+//        printk("sl2312 stop rx : \n");
-+        reg = UART_GET_IER(port);
-+        reg &= ~(UART_IER_DR);
-+	UART_PUT_IER(port, reg);
-+
-+}
-+
-+static void sl2312_enable_ms(struct uart_port *port)
-+{
-+        unsigned int reg;
-+
-+//        printk("sl2312 enable ms : \n");
-+
-+        reg = UART_GET_IER(port);
-+        reg |= (UART_IER_MS);
-+	UART_PUT_IER(port, reg);
-+
-+}
-+
-+static void
-+sl2312_rx_chars(struct uart_port *port)
-+{
-+	struct tty_struct *tty = port->info->tty;
-+	unsigned int status, mask, ch, flg, ignored = 0;
-+
-+
-+ //       printk("sl2312_rx_chars : \n");
-+	status = UART_GET_LSR(port);
-+	while (UART_RX_DATA(status)) {
-+
-+		/*
-+		 * We need to read rds before reading the
-+		 * character from the fifo
-+		 */
-+		ch = UART_GET_CHAR(port);
-+		port->icount.rx++;
-+
-+		//if (tty->flip.count >= TTY_FLIPBUF_SIZE)
-+		if (tty && !tty_buffer_request_room(tty, 1))
-+			goto ignore_char;
-+
-+		flg = TTY_NORMAL;
-+
-+		/*
-+		 * Note that the error handling code is
-+		 * out of the main execution path
-+		 */
-+
-+		if (status & (UART_LSR_OE|UART_LSR_PE|UART_LSR_FE|UART_LSR_BI|UART_LSR_DE))
-+			goto handle_error;
-+		if (uart_handle_sysrq_char(port, ch))
-+			goto ignore_char;
-+
-+	error_return:
-+		//*tty->flip.flag_buf_ptr++ = flg;
-+		//*tty->flip.char_buf_ptr++ = ch;
-+		//tty->flip.count++;
-+		tty_insert_flip_char(tty, ch, flg);
-+	ignore_char:
-+		status = UART_GET_LSR(port);
-+	} // end of while
-+out:
-+	tty_flip_buffer_push(tty);
-+	return;
-+
-+handle_error:
-+	if (status & UART_LSR_BI) {
-+		status &= ~(UART_LSR_FE);
-+		port->icount.brk++;
-+
-+#ifdef SUPPORT_SYSRQ
-+		if (uart_handle_break(port))
-+			goto ignore_char;
-+#endif
-+	} else if (status & UART_LSR_PE)
-+		port->icount.parity++;
-+	else if (status & UART_LSR_FE)
-+		port->icount.frame++;
-+
-+	if (status & UART_LSR_OE)
-+		port->icount.overrun++;
-+
-+	if (status & port->ignore_status_mask) {
-+		if (++ignored > 100)
-+			goto out;
-+		goto ignore_char;
-+	}
-+
-+	mask = status & port->read_status_mask;
-+
-+	if (mask & UART_LSR_BI)
-+		flg = TTY_BREAK;
-+	else if (mask & UART_LSR_PE)
-+		flg = TTY_PARITY;
-+	else if (mask & UART_LSR_FE)
-+		flg = TTY_FRAME;
-+
-+	if (status & UART_LSR_OE) {
-+		/*
-+		 * CHECK: does overrun affect the current character?
-+		 * ASSUMPTION: it does not.
-+		 */
-+		//*tty->flip.flag_buf_ptr++ = flg;
-+		//*tty->flip.char_buf_ptr++ = ch;
-+		//tty->flip.count++;
-+
-+		tty_insert_flip_char(tty, 0, TTY_BREAK);
-+
-+		// if (tty->flip.count >= TTY_FLIPBUF_SIZE)
-+		if (tty_buffer_request_room(tty, 1))
-+			goto ignore_char;
-+		ch = 0;
-+		flg = TTY_OVERRUN;
-+	}
-+#ifdef SUPPORT_SYSRQ
-+	port->sysrq = 0;
-+#endif
-+	goto error_return;
-+}
-+
-+static void sl2312_tx_chars(struct uart_port *port)
-+{
-+	struct circ_buf *xmit = &port->info->xmit;
-+	int count;
-+
-+
-+	if (port->x_char) {
-+		while(!(UART_GET_LSR(port)&UART_LSR_THRE));
-+		UART_PUT_CHAR(port, port->x_char);
-+		port->icount.tx++;
-+		port->x_char = 0;
-+
-+		return;
-+	}
-+	if (uart_circ_empty(xmit) || uart_tx_stopped(port)) {
-+		sl2312_stop_tx(port);
-+
-+		return;
-+	}
-+
-+	count = port->fifosize >> 1;
-+	do {
-+		while(!(UART_GET_LSR(port)&UART_LSR_THRE));
-+		UART_PUT_CHAR(port, xmit->buf[xmit->tail]);
-+		xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
-+		port->icount.tx++;
-+		if (uart_circ_empty(xmit))
-+			break;
-+	} while (--count > 0);
-+
-+	if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
-+		uart_write_wakeup(port);
-+
-+	if (uart_circ_empty(xmit))
-+		sl2312_stop_tx(port);
-+
-+}
-+
-+static void sl2312_start_tx(struct uart_port *port)
-+{
-+        unsigned int reg;
-+
-+//        printk("sl2312 start tx : \n");
-+        reg = UART_GET_IER(port);
-+        reg |= (UART_IER_TE);
-+	UART_PUT_IER(port, reg);
-+
-+	sl2312_tx_chars(port);
-+}
-+
-+static void sl2312_modem_status(struct uart_port *port)
-+{
-+	unsigned int status;
-+
-+//        printk("it8712 modem status : \n");
-+
-+	status = UART_GET_MSR(port);
-+
-+	if (!(status & (UART_MSR_DCTS | UART_MSR_DDSR |
-+		       UART_MSR_TERI | UART_MSR_DDCD)))
-+		return;
-+
-+        if (status & UART_MSR_DDCD)
-+                uart_handle_dcd_change(port, status & UART_MSR_DCD);
-+
-+        if (status & UART_MSR_DDSR)
-+                port->icount.dsr++;
-+
-+        if (status & UART_MSR_DCTS)
-+                uart_handle_cts_change(port, status & UART_MSR_CTS);
-+
-+	wake_up_interruptible(&port->info->delta_msr_wait);
-+
-+}
-+
-+static irqreturn_t sl2312_int(int irq, void *dev_id)
-+{
-+	struct uart_port *port = dev_id;
-+	unsigned int status, pass_counter = 0;
-+
-+	status = UART_GET_INT_STATUS(port);
-+	do {
-+		switch(status)
-+		{
-+		   case UART_IIR_DR:
-+		   case UART_IIR_RLS:
-+			sl2312_rx_chars(port);
-+		   break;
-+		   case UART_IIR_TE:
-+			sl2312_tx_chars(port);
-+		   break;
-+		   case UART_IIR_MODEM:
-+			sl2312_modem_status(port);
-+		   break;
-+		   default:
-+		   break;
-+		}
-+		if (pass_counter++ > SL2312_ISR_PASS_LIMIT)
-+			break;
-+
-+		status = UART_GET_INT_STATUS(port);
-+	} while (status);
-+
-+	return IRQ_HANDLED;
-+}
-+
-+static u_int sl2312_tx_empty(struct uart_port *port)
-+{
-+//        printk("sl2312 tx empty : \n");
-+
-+	return ((UART_GET_LSR(port) & UART_LSR_TE)? TIOCSER_TEMT : 0);
-+}
-+
-+static u_int sl2312_get_mctrl(struct uart_port *port)
-+{
-+	unsigned int result = 0;
-+	unsigned int status;
-+
-+//        printk("sl2312 get mctrl : \n");
-+
-+	status = UART_GET_MSR(port);
-+	if (status & UART_MSR_DCD)
-+		result |= TIOCM_CAR;
-+	if (status & UART_MSR_DSR)
-+		result |= TIOCM_DSR;
-+	if (status & UART_MSR_CTS)
-+		result |= TIOCM_CTS;
-+	if (status & UART_MSR_RI)
-+		result |= TIOCM_RI;
-+
-+	return result;
-+}
-+
-+static void sl2312_set_mctrl_null(struct uart_port *port, u_int mctrl)
-+{
-+}
-+
-+static void sl2312_break_ctl(struct uart_port *port, int break_state)
-+{
-+	unsigned int lcr;
-+
-+//        printk("sl2312 break ctl : \n");
-+
-+	lcr = UART_GET_LCR(port);
-+	if (break_state == -1)
-+		lcr |= UART_LCR_SETBREAK;
-+	else
-+		lcr &= ~UART_LCR_SETBREAK;
-+	UART_PUT_LCR(port, lcr);
-+}
-+
-+static inline u_int uart_calculate_quot(struct uart_port *port, u_int baud)
-+{
-+	u_int quot;
-+
-+	/* Special case: B0 rate */
-+	if (!baud)
-+		baud = 9600;
-+
-+	quot = (port->uartclk / (16 * baud)-1)  ;
-+
-+	return quot;
-+}
-+
-+static void sl2312_set_termios(struct uart_port *port, struct ktermios *termios,
-+                               struct ktermios *old)
-+{
-+	unsigned int  uart_mc, old_ier, baud, quot;
-+	unsigned long flags;
-+
-+        termios->c_cflag |= CREAD;
-+#ifdef DEBUG
-+	printk("it8712_set_cflag(0x%x) called\n", cflag);
-+#endif
-+        baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16);
-+        quot = (port->uartclk / (16 * baud))  ;
-+        //uart_get_divisor(port, baud);
-+
-+	/* byte size and parity */
-+	switch (termios->c_cflag & CSIZE) {
-+	case CS5:
-+              uart_mc = UART_LCR_LEN5;
-+              break;
-+	case CS6:
-+              uart_mc = UART_LCR_LEN6;
-+              break;
-+	case CS7:
-+              uart_mc = UART_LCR_LEN7;
-+              break;
-+	default: // CS8
-+              uart_mc = UART_LCR_LEN8;
-+              break;
-+	}
-+
-+	if (termios->c_cflag & CSTOPB)
-+		uart_mc|= UART_LCR_STOP;
-+	if (termios->c_cflag & PARENB) {
-+		uart_mc |= UART_LCR_EVEN;
-+		if (!(termios->c_cflag & PARODD))
-+			uart_mc |= UART_LCR_ODD;
-+	}
-+
-+    spin_lock_irqsave(&port->lock, flags);
-+        /*
-+         * Update the per-port timeout
-+         */
-+        uart_update_timeout(port, termios->c_cflag, baud);
-+	port->read_status_mask = UART_LSR_OE;
-+	if (termios->c_iflag & INPCK)
-+		port->read_status_mask |= UART_LSR_FE | UART_LSR_PE;
-+	if (termios->c_iflag & (BRKINT | PARMRK))
-+		port->read_status_mask |= UART_LSR_BI;
-+
-+	/*
-+	 * Characters to ignore
-+	 */
-+	port->ignore_status_mask = 0;
-+	if (termios->c_iflag & IGNPAR)
-+		port->ignore_status_mask |= UART_LSR_FE | UART_LSR_PE;
-+	if (termios->c_iflag & IGNBRK) {
-+		port->ignore_status_mask |= UART_LSR_BI;
-+		/*
-+		 * If we're ignoring parity and break indicators,
-+		 * ignore overruns to (for real raw support).
-+		 */
-+		if (termios->c_iflag & IGNPAR)
-+			port->ignore_status_mask |= UART_LSR_OE;
-+	}
-+
-+	//save_flags(flags); cli();
-+	old_ier = UART_GET_IER(port);
-+
-+        if(UART_ENABLE_MS(port, termios->c_cflag))
-+             old_ier |= UART_IER_MS;
-+
-+	/* Set baud rate */
-+	UART_PUT_LCR(port, UART_LCR_DLAB);
-+	UART_PUT_DIV_LO(port, (quot & 0xff));
-+	UART_PUT_DIV_HI(port, ((quot & 0xf00) >> 8));
-+
-+	UART_PUT_LCR(port, uart_mc);
-+	UART_PUT_IER(port, old_ier);
-+
-+	//restore_flags(flags);
-+	spin_unlock_irqrestore(&port->lock, flags);
-+}
-+
-+
-+
-+static int sl2312_startup(struct uart_port *port)
-+{
-+	int retval;
-+	unsigned int regs;
-+
-+//        printk("sl2312 startup : \n");
-+
-+	/*
-+	 * Use iobase to store a pointer to info. We need this to start a
-+	 * transmission as the tranmittr interrupt is only generated on
-+	 * the transition to the idle state
-+	 */
-+
-+	/*
-+	 * Allocate the IRQ
-+	 */
-+	retval = request_irq(port->irq, sl2312_int, IRQF_DISABLED, "sl2312", port);
-+	if (retval)
-+		return retval;
-+
-+        /* setup interrupt controller  */
-+        regs = *((volatile unsigned int *)IRQ_TMODE(IO_ADDRESS(SL2312_INTERRUPT_BASE)));
-+        regs &= ~(IRQ_UART_MASK);
-+        *((volatile unsigned int *)IRQ_TMODE(IO_ADDRESS(SL2312_INTERRUPT_BASE))) = regs;
-+        regs = *((volatile unsigned int *)IRQ_TLEVEL(IO_ADDRESS(SL2312_INTERRUPT_BASE)));
-+        regs &= ~(IRQ_UART_MASK);
-+        *((volatile unsigned int *)IRQ_TLEVEL(IO_ADDRESS(SL2312_INTERRUPT_BASE))) = regs;
-+        *((volatile unsigned int *)IRQ_MASK(IO_ADDRESS(SL2312_INTERRUPT_BASE))) |= (unsigned int)(IRQ_UART_MASK);
-+
-+	/*
-+	 * Finally, enable interrupts. Use the TII interrupt to minimise
-+	 * the number of interrupts generated. If higher performance is
-+	 * needed, consider using the TI interrupt with a suitable FIFO
-+	 * threshold
-+	 */
-+	UART_PUT_IER(port, (UART_IER_DR|UART_IER_TE));
-+
-+	return 0;
-+}
-+
-+static void sl2312_shutdown(struct uart_port *port)
-+{
-+//        printk("sl2312 shutdown : \n");
-+
-+	/*
-+	 * disable all interrupts, disable the port
-+	 */
-+	UART_PUT_IER(port, 0x0);
-+
-+	/* disable break condition and fifos */
-+//	UART_PUT_MCR(port, (UART_GET_MCR(port)&UART_MCR_MASK));
-+
-+	/*
-+	 * Free the interrupt
-+	 */
-+	free_irq(port->irq, port);
-+}
-+
-+static const char *sl2312_type(struct uart_port *port)
-+{
-+	return port->type == PORT_SL2312 ? "SL2312" : NULL;
-+}
-+
-+/*
-+ * Release the memory region(s) being used by 'port'
-+ */
-+static void sl2312_release_port(struct uart_port *port)
-+{
-+//        printk("sl2312 release port : \n");
-+
-+	release_mem_region(port->mapbase, UART_PORT_SIZE);
-+}
-+
-+/*
-+ * Request the memory region(s) being used by 'port'
-+ */
-+static int sl2312_request_port(struct uart_port *port)
-+{
-+	return request_mem_region(port->mapbase, UART_PORT_SIZE,
-+				    "serial_sl2312") != NULL ? 0 : -EBUSY;
-+}
-+
-+/*
-+ * Configure/autoconfigure the port.
-+ */
-+static void sl2312_config_port(struct uart_port *port, int flags)
-+{
-+
-+	if (flags & UART_CONFIG_TYPE) {
-+		if (sl2312_request_port(port) == 0)
-+			port->type = PORT_SL2312;
-+	}
-+}
-+
-+/*
-+ * verify the new serial_struct (for TIOCSSERIAL).
-+ */
-+static int sl2312_verify_port(struct uart_port *port, struct serial_struct *ser)
-+{
-+	int ret = 0;
-+
-+	if (ser->type != PORT_UNKNOWN && ser->type != PORT_UART00)
-+		ret = -EINVAL;
-+	if (ser->irq < 0 || ser->irq >= NR_IRQS)
-+		ret = -EINVAL;
-+	if (ser->baud_base < 9600)
-+		ret = -EINVAL;
-+	return ret;
-+}
-+
-+static struct uart_ops sl2312_pops = {
-+	.tx_empty		=sl2312_tx_empty,
-+	.set_mctrl		=sl2312_set_mctrl_null,
-+	.get_mctrl		=sl2312_get_mctrl,
-+	.stop_tx		=sl2312_stop_tx,
-+	.start_tx		=sl2312_start_tx,
-+	.stop_rx		=sl2312_stop_rx,
-+	.enable_ms		=sl2312_enable_ms,
-+	.break_ctl		=sl2312_break_ctl,
-+	.startup		=sl2312_startup,
-+	.shutdown		=sl2312_shutdown,
-+	.set_termios	=sl2312_set_termios,
-+	.type			=sl2312_type,
-+	.release_port	=sl2312_release_port,
-+	.request_port	=sl2312_request_port,
-+	.config_port	=sl2312_config_port,
-+	.verify_port	=sl2312_verify_port,
-+};
-+
-+#ifdef CONFIG_ARCH_SL2312
-+
-+static struct uart_port sl2312_ports[UART_NR] = {
-+	{
-+		membase:	(void *)IO_ADDRESS(SL2312_UART_BASE),
-+		mapbase:	SL2312_UART_BASE,
-+		iotype:		SERIAL_IO_MEM,
-+		irq:		IRQ_UART,
-+		uartclk:	UART_CLK,
-+		fifosize:	16,
-+		ops:		&sl2312_pops,
-+		flags:		ASYNC_BOOT_AUTOCONF,
-+	}
-+};
-+
-+#endif
-+
-+#ifdef CONFIG_SERIAL_SL2312_CONSOLE
-+#ifdef used_and_not_const_char_pointer
-+static int sl2312_console_read(struct uart_port *port, char *s, u_int count)
-+{
-+	unsigned int status;
-+	int c;
-+#ifdef DEBUG
-+	printk("sl2312_console_read() called\n");
-+#endif
-+
-+	c = 0;
-+	while (c < count) {
-+		status = UART_GET_LSR(port);
-+ 		if (UART_RX_DATA(status)) {
-+			*s++ = UART_GET_CHAR(port);
-+			c++;
-+		} else {
-+			// nothing more to get, return
-+			return c;
-+		}
-+	}
-+	// return the count
-+	return c;
-+}
-+#endif
-+static void sl2312_console_write(struct console *co, const char *s, unsigned count)
-+{
-+#ifdef CONFIG_ARCH_SL2312
-+	struct uart_port *port = sl2312_ports + co->index;
-+	unsigned int status, old_ies;
-+	int i;
-+
-+	/*
-+	 *	First save the CR then disable the interrupts
-+	 */
-+	old_ies = UART_GET_IER(port);
-+	UART_PUT_IER(port,0x0);
-+
-+	/*
-+	 *	Now, do each character
-+	 */
-+	for (i = 0; i < count; i++) {
-+		do {
-+			status = UART_GET_LSR(port);
-+		} while (!UART_TX_READY(status));
-+		UART_PUT_CHAR(port, s[i]);
-+		if (s[i] == '\n') {
-+			do {
-+				status = UART_GET_LSR(port);
-+			} while (!UART_TX_READY(status));
-+			UART_PUT_CHAR(port, '\r');
-+		}
-+	}
-+
-+	/*
-+	 *	Finally, wait for transmitter to become empty
-+	 *	and restore the IES
-+	 */
-+	do {
-+		status = UART_GET_LSR(port);
-+	} while (!(status&UART_LSR_TE));
-+	UART_PUT_IER(port, old_ies);
-+#endif
-+}
-+
-+#if 0
-+static void sl2312_console_device(struct console *co,int *index)
-+{
-+
-+	struct uart_driver *p = co->data;
-+    *index = co->index;
-+    return p->tty_driver;
-+
-+}
-+#endif
-+
-+static void /*__init*/ sl2312_console_get_options(struct uart_port *port, int *baud, int *parity, int *bits)
-+{
-+//	printk("sl2312 console get options : \n");
-+
-+	u_int uart_mc, quot;
-+	uart_mc= UART_GET_MCR(port);
-+
-+	*parity = 'n';
-+	if (uart_mc & UART_LCR_PE) {
-+		if (uart_mc & UART_LCR_EVEN)
-+			*parity = 'e';
-+		else
-+			*parity = 'o';
-+	}
-+
-+	switch (uart_mc & UART_LCR_MSK){
-+
-+	case UART_LCR_LEN5:
-+		*bits = 5;
-+		break;
-+	case UART_LCR_LEN6:
-+		*bits = 6;
-+		break;
-+	case UART_LCR_LEN7:
-+		*bits = 7;
-+		break;
-+	case UART_LCR_LEN8:
-+		*bits = 8;
-+		break;
-+	}
-+	UART_PUT_MCR(port,UART_LCR_DLAB);
-+	quot = UART_GET_DIV_LO(port) | (UART_GET_DIV_HI(port) << 8);
-+	UART_PUT_MCR(port,uart_mc);
-+	*baud = port->uartclk / (16 *quot );
-+}
-+
-+static int __init sl2312_console_setup(struct console *co, char *options)
-+{
-+	struct uart_port *port;
-+	int baud = 19200;
-+	int bits = 8;
-+	int parity = 'n';
-+	int flow= 'n';
-+
-+	printk("sl2312 console setup : \n");
-+
-+#ifdef CONFIG_ARCH_SL2312
-+	/*
-+	 * Check whether an invalid uart number has been specified, and
-+	 * if so, search for the first available port that does have
-+	 * console support.
-+	 */
-+	port = uart_get_console(sl2312_ports,SL2312_NO_PORTS,co);
-+#else
-+	return -ENODEV;
-+#endif
-+
-+	if (options)
-+		uart_parse_options(options, &baud, &parity, &bits, &flow);
-+	else
-+		sl2312_console_get_options(port, &baud, &parity, &bits);
-+
-+	return uart_set_options(port, co, baud, parity, bits, flow);
-+}
-+
-+extern struct uart_driver sl2312_reg;
-+static struct console sl2312_console = {
-+	.name      = SERIAL_SL2312_NAME,
-+	.write		= sl2312_console_write,
-+	.device		= uart_console_device,
-+//	.device		= sl2312_console_device,
-+	.setup		= sl2312_console_setup,
-+//	.flags		= (CON_PRINTBUFFER|CON_ENABLED),
-+	.flags		= CON_PRINTBUFFER,
-+	.index		= -1,
-+	.data       = &sl2312_reg,
-+};
-+
-+static int __init sl2312_console_init(void)
-+{
-+	register_console(&sl2312_console);
-+	return 0;
-+
-+}
-+
-+console_initcall(sl2312_console_init);
-+
-+#define SL2312_CONSOLE	&sl2312_console
-+#else
-+#define SL2312_CONSOLE	NULL
-+#endif
-+
-+// static
-+struct uart_driver sl2312_reg = {
-+	.owner         = NULL,
-+	.driver_name	= SERIAL_SL2312_NAME,
-+	.dev_name		= SERIAL_SL2312_NAME,
-+	.major          = SERIAL_SL2312_MAJOR,
-+	.minor			= SERIAL_SL2312_MINOR,
-+	.nr				= UART_NR,
-+	.cons			= SL2312_CONSOLE,
-+};
-+
-+static int __init sl2312_init(void)
-+{
-+       int result;
-+	//printk("serial_it8712: it871212_init \n");
-+
-+        result = uart_register_driver(&sl2312_reg);
-+        if(result)
-+             return result;
-+	result = uart_add_one_port(&sl2312_reg, &sl2312_ports[0]);
-+
-+        return result;
-+}
-+
-+
-+__initcall(sl2312_init);
---- a/include/linux/serial_core.h
-+++ b/include/linux/serial_core.h
-@@ -147,6 +147,10 @@
- #define PORT_SB1250_DUART	77
- 
- 
-+/* Storlink Soc */
-+#define PORT_SL2312     72
-+#define PORT_IT8712     73
-+
- #ifdef __KERNEL__
- 
- #include 
---- a/drivers/char/Makefile
-+++ b/drivers/char/Makefile
-@@ -70,6 +70,16 @@
- obj-$(CONFIG_APPLICOM)		+= applicom.o
- obj-$(CONFIG_SONYPI)		+= sonypi.o
- obj-$(CONFIG_RTC)		+= rtc.o
-+
-+###  for Storlink SoC ###
-+obj-$(CONFIG_SL2312_RTC) += sl2312_rtc.o
-+obj-$(CONFIG_IT8712_GPIO)   += it8712_gpio.o
-+obj-$(CONFIG_GEMINI_GPIO)   += gemini_gpio.o
-+obj-$(CONFIG_GEMINI_PWC) += gemini_pwr.o
-+obj-$(CONFIG_GEMINI_CIR)    += gemini_cir.o
-+obj-$(CONFIG_GEMINI_I2S)    += gemini_i2s.o
-+obj-$(CONFIG_SL2312_WATCHDOG) += sl2312_wd.o
-+
- obj-$(CONFIG_HPET)		+= hpet.o
- obj-$(CONFIG_GEN_RTC)		+= genrtc.o
- obj-$(CONFIG_EFI_RTC)		+= efirtc.o
---- a/drivers/serial/Kconfig
-+++ b/drivers/serial/Kconfig
-@@ -280,6 +280,56 @@
- 
- comment "Non-8250 serial port support"
- 
-+config SERIAL_SL2312
-+	bool "SL2312  serial port (sl2312) support"
-+	depends on ARCH_SL2312
-+	select SERIAL_CORE
-+	select SERIAL_SL2312_CONSOLE
-+	help
-+         Say Y here if you want to use the hard logic uart on SWORD. This
-+         driver also supports soft logic implentations of this uart core.
-+
-+config SERIAL_SL2312_CONSOLE
-+	bool "Support for console on SL2312 serial port"
-+	depends on SERIAL_SL2312
-+	select SERIAL_CORE_CONSOLE
-+	help
-+        Say Y here if you want to support a serial console on an SWORD
-+        hard logic uart or uart00 IP core.
-+
-+        Even if you say Y here, the currently visible virtual console
-+        (/dev/tty0) will still be used as the system console by default, but
-+        you can alter that using a kernel command line option such as
-+        "console=ttyS0". (Try "man bootparam" or see the documentation of
-+        your boot loader (lilo or loadlin) about how to pass options to the
-+        kernel at boot time.)
-+
-+
-+config SERIAL_IT8712
-+	bool "Sl2312 serial port(IT8712) support"
-+	depends on ARM && ARCH_SL2312 && SL2312_LPC
-+	select SERIAL_CORE
-+	select SERIAL_IT8712_CONSOLE
-+	help
-+	  Say Y here if you want to use the hard logic uart on Excalibur. This
-+	  driver also supports soft logic implentations of this uart core.
-+
-+config SERIAL_IT8712_CONSOLE
-+	bool "Support for console on Sword serial port(IT8712)"
-+	depends on SERIAL_IT8712
-+	select SERIAL_CORE_CONSOLE
-+	help
-+	  Say Y here if you want to support a serial console on an Excalibur
-+	  hard logic uart or uart00 IP core.
-+
-+	  Even if you say Y here, the currently visible virtual console
-+	  (/dev/tty0) will still be used as the system console by default, but
-+	  you can alter that using a kernel command line option such as
-+	  "console=ttySI0". (Try "man bootparam" or see the documentation of
-+	  your boot loader (lilo or loadlin) about how to pass options to the
-+	  kernel at boot time.)
-+
-+
- config SERIAL_AMBA_PL010
- 	tristate "ARM AMBA PL010 serial port support"
- 	depends on ARM_AMBA && (BROKEN || !ARCH_VERSATILE)
---- a/drivers/serial/Makefile
-+++ b/drivers/serial/Makefile
-@@ -62,5 +62,7 @@
- obj-$(CONFIG_SERIAL_ATMEL) += atmel_serial.o
- obj-$(CONFIG_SERIAL_UARTLITE) += uartlite.o
- obj-$(CONFIG_SERIAL_NETX) += netx-serial.o
-+obj-$(CONFIG_SERIAL_IT8712) += it8712.o
-+obj-$(CONFIG_SERIAL_SL2312) += serial_sl2312.o
- obj-$(CONFIG_SERIAL_OF_PLATFORM) += of_serial.o
- obj-$(CONFIG_SERIAL_KS8695) += serial_ks8695.o
diff --git a/target/linux/storm/patches/1022-watchdog.patch b/target/linux/storm/patches/1022-watchdog.patch
deleted file mode 100644
index 3055a94822..0000000000
--- a/target/linux/storm/patches/1022-watchdog.patch
+++ /dev/null
@@ -1,398 +0,0 @@
---- a/arch/arm/mach-sl2312/sl3516_device.c
-+++ b/arch/arm/mach-sl2312/sl3516_device.c
-@@ -76,9 +76,30 @@
- 	.resource       = sl3516_sata0_resources,
- };
- 
-+static struct resource sl351x_wdt_resources[] = {
-+	[0] = {
-+		.start  = SL2312_WAQTCHDOG_BASE + 0x00,
-+		.end    = SL2312_WAQTCHDOG_BASE + 0x1C,
-+		.flags  = IORESOURCE_MEM,
-+	},
-+	[1] = {
-+		.start  = IRQ_WATCHDOG,
-+		.end    = IRQ_WATCHDOG,
-+		.flags  = IORESOURCE_IRQ,
-+	},
-+};
-+
-+static struct platform_device sl351x_wdt = {
-+	.name		= "sl351x-wdt",
-+	.id		= -1,
-+	.resource	= sl351x_wdt_resources,
-+	.num_resources	= ARRAY_SIZE(sl351x_wdt_resources),
-+};
-+
- static struct platform_device *sata_devices[] __initdata = {
- 	&sata_device,
- 	&sata0_device,
-+	&sl351x_wdt,
- };
- 
- static int __init sl3516_init(void)
---- a/drivers/char/watchdog/Kconfig
-+++ b/drivers/char/watchdog/Kconfig
-@@ -171,6 +171,17 @@
- 	  To compile this driver as a module, choose M here: the
- 	  module will be called ep93xx_wdt.
- 
-+config WATCHDOG_SL351X
-+	tristate "SL351x Watchdog"
-+	depends on WATCHDOG && ARCH_SL2312
-+	help
-+	  This driver adds watchdog support for the integrated watchdog in the
-+	  SL351x processors (Farraday core). If you have one of these processors
-+	  and wish to have watchdog support enabled, say Y, otherwise say N.
-+
-+	  To compile this driver as a module, choose M here: the
-+	  module will be called sl351x_wdt.
-+
- config OMAP_WATCHDOG
- 	tristate "OMAP Watchdog"
- 	depends on ARCH_OMAP16XX || ARCH_OMAP24XX
---- a/drivers/char/watchdog/Makefile
-+++ b/drivers/char/watchdog/Makefile
-@@ -36,6 +36,7 @@
- obj-$(CONFIG_SA1100_WATCHDOG) += sa1100_wdt.o
- obj-$(CONFIG_MPCORE_WATCHDOG) += mpcore_wdt.o
- obj-$(CONFIG_EP93XX_WATCHDOG) += ep93xx_wdt.o
-+obj-$(CONFIG_WATCHDOG_SL351X) += sl351x_wdt.o
- obj-$(CONFIG_PNX4008_WATCHDOG) += pnx4008_wdt.o
- obj-$(CONFIG_IOP_WATCHDOG) += iop_wdt.o
- obj-$(CONFIG_DAVINCI_WATCHDOG) += davinci_wdt.o
---- /dev/null
-+++ b/drivers/char/watchdog/sl351x_wdt.c
-@@ -0,0 +1,332 @@
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+#include 
-+
-+#define WATCHDOG_TEST 1
-+#define PFX "sl351x-wdt: "
-+
-+#define _WATCHDOG_COUNTER  0x00
-+#define _WATCHDOG_LOAD     0x04
-+#define _WATCHDOG_RESTART  0x08
-+#define _WATCHDOG_CR       0x0C
-+#define _WATCHDOG_STATUS   0x10
-+#define _WATCHDOG_CLEAR    0x14
-+#define _WATCHDOG_INTRLEN  0x18
-+
-+static struct resource  *wdt_mem;
-+static struct resource  *wdt_irq;
-+static void __iomem     *wdt_base;
-+static int 		wdt_margin = WATCHDOG_TIMEOUT_MARGIN;	/* in range of 0 .. 60s */
-+
-+static int open_state = WATCHDOG_DRIVER_CLOSE;
-+static int wd_expire = 0;
-+
-+static void watchdog_enable(void)
-+{
-+	unsigned long wdcr;
-+
-+	wdcr = readl(wdt_base + _WATCHDOG_CR);
-+	wdcr |= (WATCHDOG_WDENABLE_MSK|WATCHDOG_WDRST_MSK);
-+#ifdef WATCHDOG_TEST
-+	wdcr |= WATCHDOG_WDINTR_MSK;
-+//	wdcr &= ~WATCHDOG_WDRST_MSK;
-+#endif
-+	wdcr &= ~WATCHDOG_WDCLOCK_MSK;
-+	writel(wdcr, wdt_base + _WATCHDOG_CR);
-+}
-+
-+static void watchdog_set_timeout(unsigned long timeout)
-+{
-+	timeout = WATCHDOG_TIMEOUT_SCALE * timeout;
-+	writel(timeout, wdt_base + _WATCHDOG_LOAD);
-+	writel(WATCHDOG_RESTART_VALUE, wdt_base + _WATCHDOG_RESTART);
-+}
-+
-+static void watchdog_keepalive(void)
-+{
-+	writel(WATCHDOG_RESTART_VALUE, wdt_base + _WATCHDOG_RESTART);
-+}
-+
-+static void watchdog_disable(void)
-+{
-+	unsigned long wdcr;
-+
-+	wdcr = readl(wdt_base + _WATCHDOG_CR);
-+	wdcr &= ~WATCHDOG_WDENABLE_MSK;
-+	writel(wdcr, wdt_base + _WATCHDOG_CR);
-+}
-+
-+
-+#ifdef WATCHDOG_TEST
-+static irqreturn_t watchdog_irq(int irq, void *dev_id, struct pt_regs *regs)
-+{
-+	unsigned int clear;
-+
-+	writel(WATCHDOG_CLEAR_STATUS, wdt_base + _WATCHDOG_CLEAR);
-+	printk(KERN_INFO PFX "Watchdog timeout, resetting system...\n");
-+
-+	clear = __raw_readl(IO_ADDRESS(SL2312_INTERRUPT_BASE)+0x0C);
-+	clear &= 0x01;
-+	__raw_writel(clear,IO_ADDRESS(SL2312_INTERRUPT_BASE)+0x08);
-+	wd_expire = 1;
-+	return IRQ_HANDLED;
-+}
-+
-+#endif
-+
-+#define OPTIONS WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING | WDIOF_MAGICCLOSE
-+static struct watchdog_info sl351x_wdt_ident = {
-+	.options          =     OPTIONS,
-+	.firmware_version =     0,
-+	.identity         =     "sl351x Watchdog",
-+};
-+
-+struct file_operations watchdog_fops = {
-+	.write		= watchdog_write,
-+	.read		= watchdog_read,
-+	.open		= watchdog_open,
-+	.release	= watchdog_release,
-+	.ioctl		= watchdog_ioctl,
-+};
-+
-+static int watchdog_open(struct inode *inode, struct file *filp)
-+{
-+	if (open_state == WATCHDOG_DRIVER_OPEN)
-+		return -EBUSY;
-+
-+	wd_expire = 0;
-+
-+	watchdog_disable();
-+	watchdog_set_timeout(wdt_margin);
-+	watchdog_enable();
-+
-+	printk(KERN_INFO PFX "watchog timer enabled, margin: %ds.\n", wdt_margin);
-+	open_state = WATCHDOG_DRIVER_OPEN;
-+
-+	return nonseekable_open(inode, filp);
-+}
-+
-+static int watchdog_release(struct inode *inode, struct file *filp)
-+{
-+	watchdog_disable();
-+
-+	open_state = WATCHDOG_DRIVER_CLOSE;
-+	wd_expire = 0;
-+	printk(KERN_INFO PFX "watchog timer disabled, margin: %ds.\n", wdt_margin);
-+
-+	return 0;
-+}
-+
-+static ssize_t watchdog_read(struct file *filp, char *buf, size_t count, loff_t *off)
-+{
-+	int i;
-+	unsigned long val;
-+
-+
-+	for(i=0;i< count;i++)
-+	{
-+		if ((i%4)==0)
-+			val = *((unsigned long *)WATCHDOG_COUNTER);
-+		buf[i] = (val & 0xFF);
-+		val >>= 8;
-+	}
-+	return count;
-+}
-+
-+static ssize_t watchdog_write(struct file *filp, const char *buf, size_t len, loff_t *off)
-+{
-+	/*  Refresh the timer. */
-+	if (len) {
-+		watchdog_keepalive();
-+	}
-+	return len;
-+
-+}
-+
-+static int watchdog_ioctl(struct inode *inode, struct file *filp,
-+			  unsigned int cmd, unsigned long arg)
-+{
-+	void __user *argp = (void __user *)arg;
-+	int margin;
-+
-+	switch(cmd)
-+	{
-+	case WDIOC_GETSUPPORT:
-+		return copy_to_user(argp, &sl351x_wdt_ident,
-+				    sizeof(sl351x_wdt_ident)) ? -EFAULT : 0;
-+
-+	case WDIOC_GETSTATUS:
-+	case WDIOC_GETBOOTSTATUS:
-+		return put_user(0, (int __user*)argp);
-+
-+	case WDIOC_KEEPALIVE:
-+		watchdog_keepalive();
-+		return 0;
-+
-+	case WDIOC_SETTIMEOUT:
-+		if (get_user(margin, (int __user*)argp))
-+			return -EFAULT;
-+
-+		/* Arbitrary, can't find the card's limits */
-+		if ((margin < 0) || (margin > 60))
-+			return -EINVAL;
-+
-+		// watchdog_disable();
-+		wdt_margin = margin;
-+		watchdog_set_timeout(margin);
-+		watchdog_keepalive();
-+		// watchdog_enable();
-+
-+		/* Fall through */
-+
-+	case WDIOC_GETTIMEOUT:
-+		return put_user(wdt_margin, (int *)arg);
-+
-+	default:
-+		return -ENOIOCTLCMD;
-+	}
-+}
-+
-+static struct miscdevice wd_dev= {
-+	WATCHDOG_MINOR,
-+	"watchdog",
-+	&watchdog_fops
-+};
-+
-+static char banner[] __initdata = KERN_INFO "SL351x Watchdog Timer, (c) 2007 WILIBOX\n";
-+
-+static int sl351x_wdt_probe(struct platform_device *pdev)
-+{
-+	struct resource *res;
-+	int ret, size;
-+	unsigned long wdcr;
-+
-+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+	if (res == NULL) {
-+		printk(KERN_INFO PFX "failed to get memory region resouce\n");
-+		return -ENOMEM;
-+	}
-+
-+	size = (res->end-res->start)+1;
-+
-+	wdt_mem = request_mem_region(res->start, size, pdev->name);
-+	if (wdt_mem == NULL) {
-+		printk(KERN_INFO PFX "failed to get memory region\n");
-+		return -ENOENT;
-+	}
-+
-+	wdt_base = ioremap(res->start, size);
-+	if (wdt_base == NULL) {
-+		printk(KERN_INFO PFX "failed to ioremap() region\n");
-+		return -EINVAL;
-+	}
-+
-+	res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
-+	if (res == NULL) {
-+		 printk(KERN_INFO PFX "failed to get irq resource\n");
-+		 return -ENOENT;
-+	}
-+
-+	wdt_irq = res;
-+
-+	ret = request_irq(res->start, watchdog_irq, 0, pdev->name, pdev);
-+	if (ret != 0) {
-+		printk(KERN_INFO PFX "failed to install irq (%d)\n", ret);
-+		return ret;
-+	}
-+
-+	wdcr = readl(wdt_base + _WATCHDOG_CR);
-+	if (wdcr & WATCHDOG_WDENABLE_MSK) {
-+		printk(KERN_INFO PFX "Found watchdog in enabled state, reseting ...\n");
-+		wdcr &= ~WATCHDOG_WDENABLE_MSK;
-+		writel(wdcr, wdt_base + _WATCHDOG_CR);
-+	}
-+
-+	ret = misc_register(&wd_dev);
-+
-+	return ret;
-+}
-+
-+static int sl351x_wdt_remove(struct platform_device *pdev)
-+{
-+	if (wdt_base != NULL) {
-+		iounmap(wdt_base);
-+		wdt_base = NULL;
-+	}
-+
-+	if (wdt_irq != NULL) {
-+		free_irq(wdt_irq->start, pdev);
-+		release_resource(wdt_irq);
-+		wdt_irq = NULL;
-+	}
-+
-+	if (wdt_mem != NULL) {
-+		release_resource(wdt_mem);
-+		wdt_mem = NULL;
-+	}
-+
-+	misc_deregister(&wd_dev);
-+
-+	return 0;
-+}
-+
-+static void sl351x_wdt_shutdown(struct platform_device *dev)
-+{
-+	watchdog_disable();
-+}
-+
-+#ifdef CONFIG_PM
-+static int sl351x_wdt_suspend(struct platform_device *dev, pm_message_t state)
-+{
-+	watchdog_disable();
-+}
-+
-+static int sl351x_wdt_resume(struct platform_device *dev)
-+{
-+	watchdog_set_timeout(wdt_margin);
-+	watchdog_enable();
-+}
-+
-+#else
-+#define sl351x_wdt_suspend	NULL
-+#define sl351x_wdt_resume	NULL
-+#endif
-+
-+static struct platform_driver sl351x_wdt_driver = {
-+	.probe          = sl351x_wdt_probe,
-+	.remove         = sl351x_wdt_remove,
-+	.shutdown       = sl351x_wdt_shutdown,
-+	.suspend        = sl351x_wdt_suspend,
-+	.resume         = sl351x_wdt_resume,
-+	.driver         = {
-+		.owner  = THIS_MODULE,
-+		.name   = "sl351x-wdt",
-+	},
-+};
-+
-+static int __init watchdog_init(void)
-+{
-+	printk(banner);
-+	return platform_driver_register(&sl351x_wdt_driver);
-+}
-+
-+static void __exit watchdog_exit(void)
-+{
-+	platform_driver_unregister(&sl351x_wdt_driver);
-+}
-+
-+module_init(watchdog_init);
-+module_exit(watchdog_exit);