From: Lad, Prabhakar Date: Sun, 24 Jun 2012 21:35:22 +0000 (+0000) Subject: da850/omap-l138: Add support for NAND SPL X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=122f9c9bdc9b39a6395f96c74223c2a8194cf821;p=project%2Fbcm63xx%2Fu-boot.git da850/omap-l138: Add support for NAND SPL This patch adds configuration required for NAND SP on DA850/OMAP-L138. Tested-by: Christian Riesch Signed-off-by: Lad, Prabhakar Signed-off-by: Rajashekhara, Sudhakar Signed-off-by: Hadli, Manjunath --- diff --git a/include/configs/da850evm.h b/include/configs/da850evm.h index e4cc3be998..7c83ecdaf7 100644 --- a/include/configs/da850evm.h +++ b/include/configs/da850evm.h @@ -192,6 +192,32 @@ #define CONFIG_SYS_ALE_MASK 0x8 #undef CONFIG_SYS_NAND_HW_ECC #define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND devices */ +#define CONFIG_SYS_NAND_HW_ECC_OOBFIRST +#define CONFIG_SYS_NAND_5_ADDR_CYCLE +#define CONFIG_SYS_NAND_PAGE_SIZE (2 << 10) +#define CONFIG_SYS_NAND_BLOCK_SIZE (128 << 10) +#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x28000 +#define CONFIG_SYS_NAND_U_BOOT_SIZE 0x60000 +#define CONFIG_SYS_NAND_U_BOOT_DST 0xc1080000 +#define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_NAND_U_BOOT_DST +#define CONFIG_SYS_NAND_U_BOOT_RELOC_SP (CONFIG_SYS_NAND_U_BOOT_DST - \ + CONFIG_SYS_NAND_U_BOOT_SIZE - \ + CONFIG_SYS_MALLOC_LEN - \ + GENERATED_GBL_DATA_SIZE) +#define CONFIG_SYS_NAND_ECCPOS { \ + 24, 25, 26, 27, 28, \ + 29, 30, 31, 32, 33, 34, 35, 36, 37, 38, \ + 39, 40, 41, 42, 43, 44, 45, 46, 47, 48, \ + 49, 50, 51, 52, 53, 54, 55, 56, 57, 58, \ + 59, 60, 61, 62, 63 } +#define CONFIG_SYS_NAND_PAGE_COUNT 64 +#define CONFIG_SYS_NAND_BAD_BLOCK_POS 0 +#define CONFIG_SYS_NAND_ECCSIZE 512 +#define CONFIG_SYS_NAND_ECCBYTES 10 +#define CONFIG_SYS_NAND_OOBSIZE 64 +#define CONFIG_SPL_NAND_SUPPORT +#define CONFIG_SPL_NAND_SIMPLE +#define CONFIG_SPL_NAND_LOAD #endif /*