From: H Hartley Sweeten <hsweeten@visionengravers.com>
Date: Fri, 25 Sep 2015 00:52:03 +0000 (-0700)
Subject: staging: comedi: rtd529: usleep_range is preferred over udelay
X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=120bdac7376a36418eb1d55e0161dc0e660a45c3;p=openwrt%2Fstaging%2Fblogic.git

staging: comedi: rtd529: usleep_range is preferred over udelay

Fix checkpatch issue: "CHECK: usleep_range is preferred over udelay; see
Documentation/timers/timers-howto.txt".  `udelay()` is only used in the
firmware upload process.  Replace them with `usleep_range()` with a
reasonable upper limit.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---

diff --git a/drivers/staging/comedi/drivers/rtd520.c b/drivers/staging/comedi/drivers/rtd520.c
index ea594e675b6e..49cbf48d1497 100644
--- a/drivers/staging/comedi/drivers/rtd520.c
+++ b/drivers/staging/comedi/drivers/rtd520.c
@@ -513,7 +513,7 @@ static int rtd520_probe_fifo_depth(struct comedi_device *dev)
 		unsigned fifo_status;
 		/* trigger conversion */
 		writew(0, dev->mmio + LAS0_ADC);
-		udelay(1);
+		usleep_range(1, 1000);
 		fifo_status = readl(dev->mmio + LAS0_ADC);
 		if ((fifo_status & FS_ADC_HEMPTY) == 0) {
 			fifo_size = 2 * i;
@@ -1142,7 +1142,7 @@ static void rtd_reset(struct comedi_device *dev)
 	struct rtd_private *devpriv = dev->private;
 
 	writel(0, dev->mmio + LAS0_BOARD_RESET);
-	udelay(100);		/* needed? */
+	usleep_range(100, 1000);	/* needed? */
 	writel(0, devpriv->lcfg + PLX_INTRCS_REG);
 	writew(0, dev->mmio + LAS0_IT);
 	writew(~0, dev->mmio + LAS0_CLEAR);