From: Felix Fietkau <nbd@openwrt.org>
Date: Sun, 17 Jan 2016 19:55:04 +0000 (+0000)
Subject: lantiq: Use the new pinctrl compatible strings
X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=1204a1b1e55a3d1e0ff7b0309c414fb0a1f38eda;p=openwrt%2Fstaging%2Fneocturne.git

lantiq: Use the new pinctrl compatible strings

These were introduced in upstream commit
be14811c03cf "pinctrl/lantiq: introduce new dedicated devicetree
bindings" and finally allow us to use the individual pins within our dts
(for example spi_clk, etc.).
Please note that this changes the number of GPIOs which are available for
some SoCs. VRX200 SoCs for example only have 50 pins, but previously 56
pins were exposed. This means that all places which are using hardcoded
GPIO numbers (which are not passed via device-tree) need to be adjusted
(because the first GPIO number is now 462, instead of 456).

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>

SVN-Revision: 48284
---

diff --git a/target/linux/lantiq/dts/amazonse.dtsi b/target/linux/lantiq/dts/amazonse.dtsi
index 13d3e73860..5389446eba 100644
--- a/target/linux/lantiq/dts/amazonse.dtsi
+++ b/target/linux/lantiq/dts/amazonse.dtsi
@@ -90,7 +90,7 @@
 		};
 
 		gpio: pinmux@E100B10 {
-			compatible = "lantiq,pinctrl-ase";
+			compatible = "lantiq,ase-pinctrl";
 			#gpio-cells = <2>;
 			gpio-controller;
 			reg = <0xE100B10 0xA0>;
diff --git a/target/linux/lantiq/dts/ar9.dtsi b/target/linux/lantiq/dts/ar9.dtsi
index ee4e374ca4..f69a7aea9d 100644
--- a/target/linux/lantiq/dts/ar9.dtsi
+++ b/target/linux/lantiq/dts/ar9.dtsi
@@ -101,7 +101,7 @@
 		};
 
 		gpio: pinmux@E100B10 {
-			compatible = "lantiq,pinctrl-xr9";
+			compatible = "lantiq,xrx100-pinctrl";
 			#gpio-cells = <2>;
 			gpio-controller;
 			reg = <0xE100B10 0xA0>;
diff --git a/target/linux/lantiq/dts/danube.dtsi b/target/linux/lantiq/dts/danube.dtsi
index 698196d9ee..0a75fd9d45 100644
--- a/target/linux/lantiq/dts/danube.dtsi
+++ b/target/linux/lantiq/dts/danube.dtsi
@@ -123,7 +123,7 @@
 		};
 
 		gpio: pinmux@E100B10 {
-			compatible = "lantiq,pinctrl-xway";
+			compatible = "lantiq,danube-pinctrl";
 			#gpio-cells = <2>;
 			gpio-controller;
 			reg = <0xE100B10 0xA0>;
diff --git a/target/linux/lantiq/dts/vr9.dtsi b/target/linux/lantiq/dts/vr9.dtsi
index df63ce7240..8f9635807e 100644
--- a/target/linux/lantiq/dts/vr9.dtsi
+++ b/target/linux/lantiq/dts/vr9.dtsi
@@ -113,7 +113,7 @@
 		};
 
 		gpio: pinmux@E100B10 {
-			compatible = "lantiq,pinctrl-xr9";
+			compatible = "lantiq,xrx200-pinctrl";
 			#gpio-cells = <2>;
 			gpio-controller;
 			reg = <0xE100B10 0xA0>;