From: Marek Vasut <marek.vasut+renesas@gmail.com>
Date: Mon, 3 Dec 2018 19:45:22 +0000 (+0100)
Subject: ARM: dts: rmobile: Extract AVB node extras on V3M Eagle
X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=1172ade967ee594a8075f2d80083a2b04329da29;p=project%2Fbcm63xx%2Fu-boot.git

ARM: dts: rmobile: Extract AVB node extras on V3M Eagle

The AVB node is not complete in Linux 4.17 DTs on V3M Eagle, pull the
AVB node extras into U-Boot specific DT until they hit mainline Linux,
to make syncing of DTs easier.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
---
V2: Rebase on u-boot/master
---

diff --git a/arch/arm/dts/r8a77970-eagle-u-boot.dts b/arch/arm/dts/r8a77970-eagle-u-boot.dts
index 0c716deb6f..5b17f1d1f0 100644
--- a/arch/arm/dts/r8a77970-eagle-u-boot.dts
+++ b/arch/arm/dts/r8a77970-eagle-u-boot.dts
@@ -7,6 +7,7 @@
 
 #include "r8a77970-eagle.dts"
 #include "r8a77970-u-boot.dtsi"
+#include <dt-bindings/gpio/gpio.h>
 
 / {
 	aliases {
@@ -14,6 +15,25 @@
 	};
 };
 
+&avb {
+	pinctrl-0 = <&avb0_pins>;
+	pinctrl-names = "default";
+
+};
+
+&phy0 {
+	reset-gpios = <&gpio1 16 GPIO_ACTIVE_LOW>;
+};
+
+&pfc {
+	avb0_pins: avb {
+		mux {
+			groups = "avb0_link", "avb0_mdio", "avb0_rgmii", "avb0_txcrefclk";
+			function = "avb0";
+		};
+	};
+};
+
 &rpc {
 	num-cs = <1>;
 	status = "okay";
diff --git a/arch/arm/dts/r8a77970-eagle.dts b/arch/arm/dts/r8a77970-eagle.dts
index 107ac5d393..7fee1aa1ac 100644
--- a/arch/arm/dts/r8a77970-eagle.dts
+++ b/arch/arm/dts/r8a77970-eagle.dts
@@ -8,7 +8,6 @@
 
 /dts-v1/;
 #include "r8a77970.dtsi"
-#include <dt-bindings/gpio/gpio.h>
 
 / {
 	model = "Renesas Eagle board based on r8a77970";
@@ -32,8 +31,6 @@
 };
 
 &avb {
-	pinctrl-0 = <&avb0_pins>;
-	pinctrl-names = "default";
 	renesas,no-ether-link;
 	phy-handle = <&phy0>;
 	phy-mode = "rgmii-id";
@@ -44,7 +41,6 @@
 		reg = <0>;
 		interrupt-parent = <&gpio1>;
 		interrupts = <17 IRQ_TYPE_LEVEL_LOW>;
-		reset-gpios = <&gpio1 16 GPIO_ACTIVE_LOW>;
 	};
 };
 
@@ -72,13 +68,6 @@
 };
 
 &pfc {
-	avb0_pins: avb {
-		mux {
-			groups = "avb0_link", "avb0_mdio", "avb0_rgmii", "avb0_txcrefclk";
-			function = "avb0";
-		};
-	};
-
 	i2c0_pins: i2c0 {
 		groups = "i2c0";
 		function = "i2c0";