From: John Crispin <john@openwrt.org>
Date: Sat, 27 Jul 2013 09:23:29 +0000 (+0000)
Subject: ramips: enable usb phy support on rt5350
X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=115c6f85cff0f04c14dde8deb896a65e36554ca3;p=openwrt%2Fstaging%2Fstintel.git

ramips: enable usb phy support on rt5350

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37564
---

diff --git a/target/linux/ramips/rt305x/config-3.10 b/target/linux/ramips/rt305x/config-3.10
index 809f136764..700e5bf6f5 100644
--- a/target/linux/ramips/rt305x/config-3.10
+++ b/target/linux/ramips/rt305x/config-3.10
@@ -34,6 +34,7 @@ CONFIG_DMA_NONCOHERENT=y
 # CONFIG_DTB_RT305X_EVAL is not set
 CONFIG_DTB_RT_NONE=y
 CONFIG_DTC=y
+# CONFIG_DWC_OTG is not set
 CONFIG_EARLY_PRINTK=y
 CONFIG_GENERIC_ATOMIC64=y
 CONFIG_GENERIC_CLOCKEVENTS=y
@@ -104,6 +105,7 @@ CONFIG_NEED_DMA_MAP_STATE=y
 CONFIG_NEED_PER_CPU_KM=y
 CONFIG_NET_RALINK=y
 CONFIG_NET_RALINK_ESW_RT3052=y
+CONFIG_NLS=m
 CONFIG_OF=y
 CONFIG_OF_ADDRESS=y
 CONFIG_OF_DEVICE=y
@@ -119,9 +121,13 @@ CONFIG_PERF_USE_VMALLOC=y
 CONFIG_PHYLIB=y
 # CONFIG_PREEMPT_RCU is not set
 CONFIG_RALINK=y
+CONFIG_RALINK_USBPHY=y
 CONFIG_RALINK_WDT=y
 # CONFIG_RCU_STALL_COMMON is not set
 CONFIG_RESET_CONTROLLER=y
+# CONFIG_SAMSUNG_USB2PHY is not set
+# CONFIG_SAMSUNG_USB3PHY is not set
+# CONFIG_SAMSUNG_USBPHY is not set
 # CONFIG_SCSI_DMA is not set
 CONFIG_SERIAL_8250_NR_UARTS=4
 CONFIG_SERIAL_8250_RT288X=y
@@ -144,7 +150,11 @@ CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
 CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
 CONFIG_TICK_CPU_ACCOUNTING=y
 CONFIG_UIDGID_CONVERTED=y
+CONFIG_USB=m
 # CONFIG_USB_ARCH_HAS_XHCI is not set
+CONFIG_USB_COMMON=m
+# CONFIG_USB_EHCI_HCD is not set
+CONFIG_USB_PHY=y
 CONFIG_USB_SUPPORT=y
 CONFIG_USE_OF=y
 CONFIG_WATCHDOG_CORE=y