From: Mathias Kresin Date: Wed, 2 Nov 2016 18:49:04 +0000 (+0100) Subject: lantiq: cleanup dts files X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=112cf52d45497cb4b5555b6fb5ba3fb764931a0b;p=openwrt%2Fstaging%2Frobimarko.git lantiq: cleanup dts files - remove not existing properties - remove properties having the same values as the included dtsi - remove nodes which are disabled in the included dtsi and not enabled in dts - replace the deprecated pinctrl-* compatible strings - use the same labels for nodes as the included dtsi - move common used vr9 pci properties to vr9.dtsi - remove the unused stp node from HomeHub 2B devcie tree source file - fix spaces vs. tabs and remove superfluous linebreaks Signed-off-by: Mathias Kresin --- diff --git a/target/linux/lantiq/dts/ARV4510PW.dts b/target/linux/lantiq/dts/ARV4510PW.dts index 68aae2b246..6f07c5f996 100644 --- a/target/linux/lantiq/dts/ARV4510PW.dts +++ b/target/linux/lantiq/dts/ARV4510PW.dts @@ -134,7 +134,6 @@ gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>; req-mask = <0x7>; }; - }; gpio-keys-polled { diff --git a/target/linux/lantiq/dts/ARV4518PWR01.dts b/target/linux/lantiq/dts/ARV4518PWR01.dts index 3642cbe44b..21a03dde48 100644 --- a/target/linux/lantiq/dts/ARV4518PWR01.dts +++ b/target/linux/lantiq/dts/ARV4518PWR01.dts @@ -4,12 +4,4 @@ / { model = "ARV4518PWR01 - SMC7908A-ISP"; - - fpi@10000000 { - - pci@E105400 { - lantiq,internal-clock; - }; - - }; }; diff --git a/target/linux/lantiq/dts/ARV4518PWR01.dtsi b/target/linux/lantiq/dts/ARV4518PWR01.dtsi index 31731444d9..49b7e50eb6 100644 --- a/target/linux/lantiq/dts/ARV4518PWR01.dtsi +++ b/target/linux/lantiq/dts/ARV4518PWR01.dtsi @@ -125,7 +125,6 @@ gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>; req-mask = <0xf>; }; - }; gpio-keys-polled { diff --git a/target/linux/lantiq/dts/ARV4518PWR01A.dts b/target/linux/lantiq/dts/ARV4518PWR01A.dts index 6c5047ceb4..e94076b43d 100644 --- a/target/linux/lantiq/dts/ARV4518PWR01A.dts +++ b/target/linux/lantiq/dts/ARV4518PWR01A.dts @@ -6,10 +6,8 @@ model = "ARV4518PWR01A - SMC7908A-ISP, Airties WAV-221"; fpi@10000000 { - pci@E105400 { lantiq,external-clock; }; - }; }; diff --git a/target/linux/lantiq/dts/ARV4520PW.dts b/target/linux/lantiq/dts/ARV4520PW.dts index 231ae156f5..17288b3527 100644 --- a/target/linux/lantiq/dts/ARV4520PW.dts +++ b/target/linux/lantiq/dts/ARV4520PW.dts @@ -118,7 +118,7 @@ ifxhcd@E101000 { status = "okay"; - gpios = <&gpio 28 GPIO_ACTIVE_HIGH>; + gpios = <&gpio 28 GPIO_ACTIVE_HIGH>; }; pci@E105400 { @@ -126,7 +126,6 @@ lantiq,external-clock; gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>; }; - }; // gpiomm 10 - switch diff --git a/target/linux/lantiq/dts/ARV4525PW.dts b/target/linux/lantiq/dts/ARV4525PW.dts index 3813b07539..69fd1aa29d 100644 --- a/target/linux/lantiq/dts/ARV4525PW.dts +++ b/target/linux/lantiq/dts/ARV4525PW.dts @@ -111,7 +111,6 @@ status = "okay"; gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>; }; - }; /* diff --git a/target/linux/lantiq/dts/ARV452CQW.dts b/target/linux/lantiq/dts/ARV452CQW.dts index eb9b45a626..4710a01486 100644 --- a/target/linux/lantiq/dts/ARV452CQW.dts +++ b/target/linux/lantiq/dts/ARV452CQW.dts @@ -135,7 +135,6 @@ lantiq,external-clock; gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>; }; - }; /* @@ -209,7 +208,7 @@ }; voice { label = "arv452cqw:blue:sprache"; - gpios = <&gpiomm 4 1>; + gpios = <&gpiomm 4 1>; }; usb: usb { label = "arv452cqw:blue:usb"; diff --git a/target/linux/lantiq/dts/ARV7518PW.dts b/target/linux/lantiq/dts/ARV7518PW.dts index e5e5e70396..d44927b813 100644 --- a/target/linux/lantiq/dts/ARV7518PW.dts +++ b/target/linux/lantiq/dts/ARV7518PW.dts @@ -144,7 +144,6 @@ gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>; req-mask = <0xf>; }; - }; /* diff --git a/target/linux/lantiq/dts/ARV7519PW.dts b/target/linux/lantiq/dts/ARV7519PW.dts index 4639ce7967..9c29c8c9c9 100644 --- a/target/linux/lantiq/dts/ARV7519PW.dts +++ b/target/linux/lantiq/dts/ARV7519PW.dts @@ -125,7 +125,7 @@ ralink_eep { compatible = "ralink,eeprom"; ralink,eeprom = "RT2860.eeprom"; - }; + }; gpio-keys-polled { compatible = "gpio-keys-polled"; diff --git a/target/linux/lantiq/dts/ARV7519RW22.dts b/target/linux/lantiq/dts/ARV7519RW22.dts index 5d78448eb6..3d08b93840 100644 --- a/target/linux/lantiq/dts/ARV7519RW22.dts +++ b/target/linux/lantiq/dts/ARV7519RW22.dts @@ -91,11 +91,6 @@ pcie@d900000 { status = "disabled"; }; - - pci@E105400 { - status = "disabled"; - compatible = "lantiq,pci-xway"; - }; }; gphy-xrx200 { diff --git a/target/linux/lantiq/dts/ARV7525PW.dts b/target/linux/lantiq/dts/ARV7525PW.dts index 8e3673346d..aeba079a48 100644 --- a/target/linux/lantiq/dts/ARV7525PW.dts +++ b/target/linux/lantiq/dts/ARV7525PW.dts @@ -100,9 +100,7 @@ pci@E105400 { status = "okay"; interrupt-map = <0x7000 0 0 1 &icu0 135 1>; - req-mask = <0x1>; }; - }; gpio-keys-polled { diff --git a/target/linux/lantiq/dts/ARV752DPW.dts b/target/linux/lantiq/dts/ARV752DPW.dts index b80005582e..d6de881fae 100644 --- a/target/linux/lantiq/dts/ARV752DPW.dts +++ b/target/linux/lantiq/dts/ARV752DPW.dts @@ -143,7 +143,6 @@ interrupt-map = <0x7000 0 0 1 &icu0 135>; req-mask = <0x3>; }; - }; ralink_eep { diff --git a/target/linux/lantiq/dts/ARV752DPW22.dts b/target/linux/lantiq/dts/ARV752DPW22.dts index 9977ec1ddb..0b0fddbd82 100644 --- a/target/linux/lantiq/dts/ARV752DPW22.dts +++ b/target/linux/lantiq/dts/ARV752DPW22.dts @@ -139,15 +139,14 @@ status = "okay"; lantiq,external-clock; interrupt-map = < - 0x7000 0 0 1 &icu0 30 - 0x7800 0 0 1 &icu0 135 - 0x7800 0 0 2 &icu0 135 - 0x7800 0 0 3 &icu0 135 + 0x7000 0 0 1 &icu0 30 + 0x7800 0 0 1 &icu0 135 + 0x7800 0 0 2 &icu0 135 + 0x7800 0 0 3 &icu0 135 >; gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>; req-mask = <0x3>; }; - }; ralink_eep { diff --git a/target/linux/lantiq/dts/ARV8539PW22.dts b/target/linux/lantiq/dts/ARV8539PW22.dts index a03b745a07..5728993017 100644 --- a/target/linux/lantiq/dts/ARV8539PW22.dts +++ b/target/linux/lantiq/dts/ARV8539PW22.dts @@ -72,7 +72,6 @@ ath,mac-increment = <1>; ath,pci-slot = <14>; ath,eep-endian; - ath,arv-ath9k-fix; }; }; @@ -120,7 +119,6 @@ gpios = <&gpio 14 GPIO_ACTIVE_HIGH>; lantiq,portmask = <0x3>; }; - }; gpio-keys-polled { diff --git a/target/linux/lantiq/dts/BTHOMEHUBV2B.dts b/target/linux/lantiq/dts/BTHOMEHUBV2B.dts index 7a0edaeecf..502132e4e9 100644 --- a/target/linux/lantiq/dts/BTHOMEHUBV2B.dts +++ b/target/linux/lantiq/dts/BTHOMEHUBV2B.dts @@ -30,15 +30,7 @@ }; fpi@10000000 { - #address-cells = <1>; - #size-cells = <1>; localbus@0 { - #address-cells = <2>; - #size-cells = <1>; - ranges = <0 0 0x0 0x3ffffff /* addrsel0 */ - 1 0 0x4000000 0x4000010>; /* addsel1 */ - compatible = "lantiq,localbus", "simple-bus"; - nor-boot@0 { /* NOR Flash: Spansion S29AL004D 512KB */ compatible = "lantiq,nor"; /* "AMD AM29LV400BB" compatible on 3.3.8 */ lantiq,cs = <0>; @@ -111,7 +103,6 @@ }; }; - ath9k_eep { compatible = "ath9k,eeprom"; ath,eep-flash = <&ath9k_cal 0x0000>; @@ -122,22 +113,10 @@ }; gpio: pinmux@E100B10 { - compatible = "lantiq,pinctrl-xway"; pinctrl-names = "default"; pinctrl-0 = <&state_default>; - #gpio-cells = <2>; - gpio-controller; - reg = <0xE100B10 0xA0>; - state_default: pinmux { - stp { - lantiq,groups = "stp"; - lantiq,function = "stp"; - lantiq,output = <1>; - lantiq,open-drain = <0>; - lantiq,pull = <0>; - }; nand_out { lantiq,groups = "nand cle", "nand ale"; lantiq,function = "ebu"; @@ -186,38 +165,21 @@ }; etop@E180000 { - compatible = "lantiq,etop-xway"; - reg = <0xE180000 0x40000>; - interrupt-parent = <&icu0>; - interrupts = <73 78>; phy-mode = "rmii"; - mac-address = [ 00 11 22 33 44 55 ]; }; ifxhcd@E101000 { status = "okay"; }; - stp0: stp@E100BB0 { + gpios: stp@E100BB0 { status = "okay"; - #gpio-cells = <2>; - compatible = "lantiq,gpio-stp-xway"; - gpio-controller; - reg = <0xE100BB0 0x40>; - - lantiq,shadow = <0xfff>; - lantiq,groups = <0x3>; }; pci@E105400 { status = "okay"; - lantiq,bus-clock = <33333333>; - interrupt-map-mask = <0xf800 0x0 0x0 0x7>; - interrupt-map = <0x7000 0 0 1 &icu0 30 1>; gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>; - req-mask = <0x1>; /* GNT1 */ }; - }; gpio-keys-polled { @@ -248,52 +210,52 @@ upgrading-orange { label = "bthomehubv2b:orange:upgrading"; - gpios = <&stp0 5 GPIO_ACTIVE_HIGH>; + gpios = <&gpios 5 GPIO_ACTIVE_HIGH>; }; phone-orange { label = "bthomehubv2b:orange:phone"; - gpios = <&stp0 6 GPIO_ACTIVE_HIGH>; + gpios = <&gpios 6 GPIO_ACTIVE_HIGH>; }; phone-blue { label = "bthomehubv2b:blue:phone"; - gpios = <&stp0 7 GPIO_ACTIVE_HIGH>; + gpios = <&gpios 7 GPIO_ACTIVE_HIGH>; }; wireless-orange { label = "bthomehubv2b:orange:wireless"; - gpios = <&stp0 8 GPIO_ACTIVE_HIGH>; + gpios = <&gpios 8 GPIO_ACTIVE_HIGH>; }; wireless_blue: wireless-blue { label = "bthomehubv2b:blue:wireless"; - gpios = <&stp0 9 GPIO_ACTIVE_HIGH>; + gpios = <&gpios 9 GPIO_ACTIVE_HIGH>; }; broadband-red { label = "bthomehubv2b:red:broadband"; - gpios = <&stp0 10 GPIO_ACTIVE_HIGH>; + gpios = <&gpios 10 GPIO_ACTIVE_HIGH>; }; broadband-orange { label = "bthomehubv2b:orange:broadband"; - gpios = <&stp0 11 GPIO_ACTIVE_HIGH>; + gpios = <&gpios 11 GPIO_ACTIVE_HIGH>; }; broadband_blue: broadband-blue { label = "bthomehubv2b:blue:broadband"; - gpios = <&stp0 12 GPIO_ACTIVE_HIGH>; + gpios = <&gpios 12 GPIO_ACTIVE_HIGH>; }; power_red: power-red { label = "bthomehubv2b:red:power"; - gpios = <&stp0 13 GPIO_ACTIVE_HIGH>; + gpios = <&gpios 13 GPIO_ACTIVE_HIGH>; }; power_orange: power-orange { label = "bthomehubv2b:orange:power"; - gpios = <&stp0 14 GPIO_ACTIVE_HIGH>; + gpios = <&gpios 14 GPIO_ACTIVE_HIGH>; default-state = "keep"; }; power_blue: power-blue { label = "bthomehubv2b:blue:power"; - gpios = <&stp0 15 GPIO_ACTIVE_HIGH>; + gpios = <&gpios 15 GPIO_ACTIVE_HIGH>; }; }; }; diff --git a/target/linux/lantiq/dts/BTHOMEHUBV3A.dts b/target/linux/lantiq/dts/BTHOMEHUBV3A.dts index 996d5b2abf..e3a252bfc4 100644 --- a/target/linux/lantiq/dts/BTHOMEHUBV3A.dts +++ b/target/linux/lantiq/dts/BTHOMEHUBV3A.dts @@ -30,15 +30,7 @@ }; fpi@10000000 { - #address-cells = <1>; - #size-cells = <1>; localbus@0 { - #address-cells = <2>; - #size-cells = <1>; - ranges = <0 0 0x0 0x3ffffff /* addrsel0 */ - 1 0 0x4000000 0x4000010>; /* addsel1 */ - compatible = "lantiq,localbus", "simple-bus"; - nand-parts@0 { /* NAND Flash: Samsung K9F5608U0D-JIB0 32MB */ compatible = "gen_nand", "lantiq,nand-xway"; lantiq,cs = <1>; @@ -91,14 +83,9 @@ }; gpio: pinmux@E100B10 { - compatible = "lantiq,pinctrl-xr9"; pinctrl-names = "default"; pinctrl-0 = <&state_default>; - #gpio-cells = <2>; - gpio-controller; - reg = <0xE100B10 0xA0>; - state_default: pinmux { nand_out { lantiq,groups = "nand cle", "nand ale"; @@ -150,7 +137,6 @@ status = "okay"; gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>; }; - }; gpio-keys-polled { @@ -219,4 +205,3 @@ }; }; }; - diff --git a/target/linux/lantiq/dts/BTHOMEHUBV5A.dts b/target/linux/lantiq/dts/BTHOMEHUBV5A.dts index 62d28fa712..c2fe11a59e 100644 --- a/target/linux/lantiq/dts/BTHOMEHUBV5A.dts +++ b/target/linux/lantiq/dts/BTHOMEHUBV5A.dts @@ -67,9 +67,6 @@ pinctrl-names = "default"; pinctrl-0 = <&state_default>; - interrupt-parent = <&icu0>; - interrupts = <166 135 66 40 41 42 38>; - state_default: pinmux { mdio { lantiq,groups = "mdio"; @@ -115,9 +112,6 @@ pci@E105400 { status = "okay"; - lantiq,bus-clock = <33333333>; - interrupt-map-mask = <0xf800 0x0 0x0 0x7>; - interrupt-map = <0x7000 0 0 1 &icu0 30 1>; gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>; }; }; diff --git a/target/linux/lantiq/dts/DGN1000B.dts b/target/linux/lantiq/dts/DGN1000B.dts index fdcce1bb34..a63199f4f5 100644 --- a/target/linux/lantiq/dts/DGN1000B.dts +++ b/target/linux/lantiq/dts/DGN1000B.dts @@ -104,6 +104,7 @@ }; }; }; + ifxhcd@E101000 { status = "okay"; }; diff --git a/target/linux/lantiq/dts/DGN3500.dtsi b/target/linux/lantiq/dts/DGN3500.dtsi index 983d854504..c7d0b2d30c 100644 --- a/target/linux/lantiq/dts/DGN3500.dtsi +++ b/target/linux/lantiq/dts/DGN3500.dtsi @@ -62,7 +62,6 @@ etop@E180000 { phy-mode = "mii"; - mac-address = [ 00 11 22 33 44 55 ]; }; ifxhcd@E101000 { @@ -71,12 +70,7 @@ pci@E105400 { status = "okay"; - - lantiq,bus-clock = <33333333>; - interrupt-map-mask = <0xf800 0x0 0x0 0x7>; - interrupt-map = <0x7000 0 0 1 &icu0 30 1>; gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>; - req-mask = <0x1>; /* GNT1 */ }; }; @@ -143,7 +137,7 @@ label = "dgn3500:red:power"; gpios = <&gpio 39 GPIO_ACTIVE_LOW>; }; - /* + /* power amber is missing */ wifi: wifi { diff --git a/target/linux/lantiq/dts/EASY50712.dts b/target/linux/lantiq/dts/EASY50712.dts index a751375c2a..28fc66b983 100644 --- a/target/linux/lantiq/dts/EASY50712.dts +++ b/target/linux/lantiq/dts/EASY50712.dts @@ -12,15 +12,7 @@ }; fpi@10000000 { - #address-cells = <1>; - #size-cells = <1>; localbus@0 { - #address-cells = <2>; - #size-cells = <1>; - ranges = <0 0 0x0 0x3ffffff /* addrsel0 */ - 1 0 0x4000000 0x4000010>; /* addsel1 */ - compatible = "lantiq,localbus", "simple-bus"; - nor-boot@0 { compatible = "lantiq,nor"; bank-width = <2>; @@ -57,14 +49,9 @@ }; gpio: pinmux@E100B10 { - compatible = "lantiq,pinctrl-xway"; pinctrl-names = "default"; pinctrl-0 = <&state_default>; - #gpio-cells = <2>; - gpio-controller; - reg = <0xE100B10 0xA0>; - state_default: pinmux { stp { lantiq,groups = "stp"; @@ -87,33 +74,7 @@ }; etop@E180000 { - compatible = "lantiq,etop-xway"; - reg = <0xE180000 0x40000>; - interrupt-parent = <&icu0>; - interrupts = <73 78>; phy-mode = "rmii"; - mac-address = [ 00 11 22 33 44 55 ]; - }; - - stp0: stp@E100BB0 { - #gpio-cells = <2>; - compatible = "lantiq,gpio-stp-xway"; - gpio-controller; - reg = <0xE100BB0 0x40>; - - lantiq,shadow = <0xfff>; - lantiq,groups = <0x3>; - }; - - pci@E105400 { - lantiq,bus-clock = <33333333>; - interrupt-map-mask = <0xf800 0x0 0x0 0x7>; - interrupt-map = < - 0x7000 0 0 1 &icu0 29 1 // slot 14, irq 29 - >; - gpios-reset = <&gpio 21 GPIO_ACTIVE_HIGH>; - req-mask = <0x1>; /* GNT1 */ }; - }; }; diff --git a/target/linux/lantiq/dts/EASY50810.dts b/target/linux/lantiq/dts/EASY50810.dts index f04796c73a..44e08cac98 100644 --- a/target/linux/lantiq/dts/EASY50810.dts +++ b/target/linux/lantiq/dts/EASY50810.dts @@ -12,15 +12,7 @@ }; fpi@10000000 { - #address-cells = <1>; - #size-cells = <1>; localbus@0 { - #address-cells = <2>; - #size-cells = <1>; - ranges = <0 0 0x0 0x3ffffff /* addrsel0 */ - 1 0 0x4000000 0x4000010>; /* addsel1 */ - compatible = "lantiq,localbus", "simple-bus"; - nor-boot@0 { compatible = "lantiq,nor"; bank-width = <2>; @@ -57,14 +49,9 @@ }; gpio: pinmux@E100B10 { - compatible = "lantiq,pinctrl-xr9"; pinctrl-names = "default"; pinctrl-0 = <&state_default>; - #gpio-cells = <2>; - gpio-controller; - reg = <0xE100B10 0xA0>; - state_default: pinmux { stp { lantiq,groups = "stp"; @@ -87,13 +74,7 @@ }; etop@E180000 { - compatible = "lantiq,etop-xway"; - reg = <0xE180000 0x40000 - 0xE108000 0x200>; - interrupt-parent = <&icu0>; - interrupts = <72 73>; phy-mode = "rmii"; - mac-address = [ 00 11 22 33 44 55 ]; }; stp0: stp@E100BB0 { @@ -105,16 +86,5 @@ lantiq,shadow = <0xfff>; lantiq,groups = <0x3>; }; - - pci@E105400 { - lantiq,bus-clock = <33333333>; - interrupt-map-mask = <0xf800 0x0 0x0 0x7>; - interrupt-map = < - 0x7000 0 0 1 &icu0 29 1 // slot 14, irq 29 - >; - gpios-reset = <&gpio 21 GPIO_ACTIVE_HIGH>; - req-mask = <0x1>; /* GNT1 */ - }; - }; }; diff --git a/target/linux/lantiq/dts/EASY80920.dtsi b/target/linux/lantiq/dts/EASY80920.dtsi index c643bf1c23..bce8d5e265 100644 --- a/target/linux/lantiq/dts/EASY80920.dtsi +++ b/target/linux/lantiq/dts/EASY80920.dtsi @@ -19,31 +19,10 @@ }; fpi@10000000 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "lantiq,fpi", "simple-bus"; - ranges = <0x0 0x10000000 0xEEFFFFF>; - reg = <0x10000000 0xEF00000>; - - localbus@0 { - #address-cells = <2>; - #size-cells = <1>; - compatible = "lantiq,localbus", "simple-bus"; - - }; - gpio: pinmux@E100B10 { - compatible = "lantiq,pinctrl-xr9"; pinctrl-names = "default"; pinctrl-0 = <&state_default>; - interrupt-parent = <&icu0>; - interrupts = <166 135 66 40 41 42 38>; - - #gpio-cells = <2>; - gpio-controller; - reg = <0xE100B10 0xA0>; - state_default: pinmux { exin3 { lantiq,groups = "exin3"; @@ -119,28 +98,6 @@ gpios = <&gpio 33 GPIO_ACTIVE_HIGH>; lantiq,portmask = <0x3>; }; - - pci@E105400 { - #address-cells = <3>; - #size-cells = <2>; - #interrupt-cells = <1>; - compatible = "lantiq,pci-xway1"; - bus-range = <0x0 0x0>; - ranges = <0x2000000 0 0x8000000 0x8000000 0 0x2000000 /* pci memory */ - 0x1000000 0 0x00000000 0xAE00000 0 0x200000>; /* io space */ - reg = <0x7000000 0x8000 /* config space */ - 0xE105400 0x400>; /* pci bridge */ - lantiq,bus-clock = <33333333>; - /*lantiq,external-clock;*/ - lantiq,delay-hi = <0>; /* 0ns delay */ - lantiq,delay-lo = <0>; /* 0.0ns delay */ - interrupt-map-mask = <0xf800 0x0 0x0 0x7>; - interrupt-map = < - 0x7000 0 0 1 &icu0 29 1 // slot 14, irq 29 - >; - gpios-reset = <&gpio 21 GPIO_ACTIVE_HIGH>; - req-mask = <0x1>; /* GNT1 */ - }; }; gphy-xrx200 { diff --git a/target/linux/lantiq/dts/FRITZ7320.dts b/target/linux/lantiq/dts/FRITZ7320.dts index 9884038867..e1e70bef6c 100644 --- a/target/linux/lantiq/dts/FRITZ7320.dts +++ b/target/linux/lantiq/dts/FRITZ7320.dts @@ -96,7 +96,6 @@ etop@E180000 { phy-mode = "mii"; - mac-address = [ 00 11 22 33 44 55 ]; }; ifxhcd@E101000 { @@ -106,11 +105,7 @@ pci@E105400 { status = "okay"; req-mask = <0xf>; - lantiq,bus-clock = <33333333>; - interrupt-map-mask = <0xf800 0x0 0x0 0x7>; - interrupt-map = <0x7000 0 0 1 &icu0 30 1>; gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>; - req-mask = <0xf>; /* GNT1 */ }; }; diff --git a/target/linux/lantiq/dts/GIGASX76X.dts b/target/linux/lantiq/dts/GIGASX76X.dts index 003083ca9f..6507157d98 100644 --- a/target/linux/lantiq/dts/GIGASX76X.dts +++ b/target/linux/lantiq/dts/GIGASX76X.dts @@ -89,9 +89,7 @@ pci@E105400 { status = "okay"; - lantiq,internal-clock; gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>; - req-mask = <0x1>; }; }; diff --git a/target/linux/lantiq/dts/P2601HNFX.dts b/target/linux/lantiq/dts/P2601HNFX.dts index 3994c18cb7..250de38122 100644 --- a/target/linux/lantiq/dts/P2601HNFX.dts +++ b/target/linux/lantiq/dts/P2601HNFX.dts @@ -24,15 +24,7 @@ }; fpi@10000000 { - #address-cells = <1>; - #size-cells = <1>; localbus@0 { - #address-cells = <2>; - #size-cells = <1>; - ranges = <0 0 0x0 0x3ffffff - 1 0 0x4000000 0x4000010>; - compatible = "lantiq,localbus", "simple-bus"; - nor-boot@0 { compatible = "lantiq,nor"; bank-width = <2>; @@ -66,14 +58,9 @@ }; gpio: pinmux@E100B10 { - compatible = "lantiq,pinctrl-xr9"; pinctrl-names = "default"; pinctrl-0 = <&state_default>; - #gpio-cells = <2>; - gpio-controller; - reg = <0xE100B10 0xA0>; - state_default: pinmux { stp { lantiq,groups = "stp"; @@ -120,14 +107,6 @@ lantiq,shadow = <0xfff>; lantiq,groups = <0x3>; }; - - pci@E105400 { - lantiq,bus-clock = <33333333>; - interrupt-map-mask = <0xf800 0x0 0x0 0x7>; - interrupt-map = <0x7000 0 0 1 &icu0 29 1>; - gpios-reset = <&gpio 21 GPIO_ACTIVE_HIGH>; - req-mask = <0x1>; - }; }; gpio-keys-polled { diff --git a/target/linux/lantiq/dts/P2812HNUF1.dts b/target/linux/lantiq/dts/P2812HNUF1.dts index 5829ee5262..53ffbdd56c 100644 --- a/target/linux/lantiq/dts/P2812HNUF1.dts +++ b/target/linux/lantiq/dts/P2812HNUF1.dts @@ -44,6 +44,7 @@ }; }; }; + pcie@d900000 { status = "disabled"; }; diff --git a/target/linux/lantiq/dts/P2812HNUFX.dtsi b/target/linux/lantiq/dts/P2812HNUFX.dtsi index be3d73d4fa..f0dfe98501 100644 --- a/target/linux/lantiq/dts/P2812HNUFX.dtsi +++ b/target/linux/lantiq/dts/P2812HNUFX.dtsi @@ -19,33 +19,11 @@ reg = <0x0 0x8000000>; }; - fpi@10000000 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "lantiq,fpi", "simple-bus"; - ranges = <0x0 0x10000000 0xEEFFFFF>; - reg = <0x10000000 0xEF00000>; - - localbus@0 { - #address-cells = <2>; - #size-cells = <1>; - ranges = <0 0 0x0 0x3ffffff /* addrsel0 */ - 1 0 0x4000000 0x4000010>; /* addsel1 */ - compatible = "lantiq,localbus", "simple-bus"; - }; - + fpi@10000000 { gpio: pinmux@E100B10 { - compatible = "lantiq,pinctrl-xr9"; pinctrl-names = "default"; pinctrl-0 = <&state_default>; - interrupt-parent = <&icu0>; - interrupts = <166 135 66 40 41 42 38>; - - #gpio-cells = <2>; - gpio-controller; - reg = <0xE100B10 0xA0>; - state_default: pinmux { exin3 { lantiq,groups = "exin3"; @@ -143,25 +121,7 @@ pci@E105400 { status = "okay"; - #address-cells = <3>; - #size-cells = <2>; - #interrupt-cells = <1>; - compatible = "lantiq,pci-xway"; - bus-range = <0x0 0x0>; - ranges = <0x2000000 0 0x8000000 0x8000000 0 0x2000000 /* pci memory */ - 0x1000000 0 0x00000000 0xAE00000 0 0x200000>; /* io space */ - reg = <0x7000000 0x8000 /* config space */ - 0xE105400 0x400>; /* pci bridge */ - lantiq,bus-clock = <33333333>; - /*lantiq,external-clock;*/ - lantiq,delay-hi = <0>; /* 0ns delay */ - lantiq,delay-lo = <0>; /* 0.0ns delay */ - interrupt-map-mask = <0xf800 0x0 0x0 0x7>; - interrupt-map = < - 0x7000 0 0 1 &icu0 30 1 // slot 14, irq 30 - >; gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>; - req-mask = <0x1>; /* GNT1 */ }; }; diff --git a/target/linux/lantiq/dts/TDW89X0.dtsi b/target/linux/lantiq/dts/TDW89X0.dtsi index 0f070ef5e1..fd37352959 100644 --- a/target/linux/lantiq/dts/TDW89X0.dtsi +++ b/target/linux/lantiq/dts/TDW89X0.dtsi @@ -120,7 +120,7 @@ compatible = "gpio-leds"; /* power is not controllable via gpio - */ + */ dsl: dsl { label = "tdw89x0:green:dsl"; gpios = <&gpio 4 GPIO_ACTIVE_HIGH>; diff --git a/target/linux/lantiq/dts/VGV7510KW22.dtsi b/target/linux/lantiq/dts/VGV7510KW22.dtsi index 88ceabeb10..181e852dee 100644 --- a/target/linux/lantiq/dts/VGV7510KW22.dtsi +++ b/target/linux/lantiq/dts/VGV7510KW22.dtsi @@ -77,13 +77,7 @@ pci@E105400 { status = "okay"; - lantiq,bus-clock = <33333333>; - interrupt-map-mask = <0xf800 0x0 0x0 0x7>; - interrupt-map = < - 0x7000 0 0 1 &icu0 30 1 // slot 14, irq 30 - >; gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>; - req-mask = <0x1>; /* GNT1 */ }; pcie@d900000 { diff --git a/target/linux/lantiq/dts/VGV7519.dtsi b/target/linux/lantiq/dts/VGV7519.dtsi index 2ed253c39c..31b429ba02 100644 --- a/target/linux/lantiq/dts/VGV7519.dtsi +++ b/target/linux/lantiq/dts/VGV7519.dtsi @@ -2,7 +2,7 @@ / { - model = "VGV7519 - KPN Experiabox V8"; + model = "VGV7519 - KPN Experiabox V8"; chosen { bootargs = "console=ttyLTQ0,115200 init=/etc/preinit"; @@ -104,13 +104,7 @@ pci@E105400 { status = "okay"; - lantiq,bus-clock = <33333333>; - interrupt-map-mask = <0xf800 0x0 0x0 0x7>; - interrupt-map = < - 0x7000 0 0 1 &icu0 30 1 // slot 14, irq 30 - >; gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>; - req-mask = <0x1>; /* GNT1 */ }; pcie@d900000 { diff --git a/target/linux/lantiq/dts/amazonse.dtsi b/target/linux/lantiq/dts/amazonse.dtsi index 84a3a9a597..520f0e0e85 100644 --- a/target/linux/lantiq/dts/amazonse.dtsi +++ b/target/linux/lantiq/dts/amazonse.dtsi @@ -90,7 +90,7 @@ compatible = "lantiq,gptu-xway"; reg = <0xE100A00 0x100>; interrupt-parent = <&icu0>; - interrupts = <97 98 99 100 101 102>; + interrupts = <97 98 99 100 101 102>; status = "disabled"; }; diff --git a/target/linux/lantiq/dts/danube.dtsi b/target/linux/lantiq/dts/danube.dtsi index ea40970f21..39f2865779 100644 --- a/target/linux/lantiq/dts/danube.dtsi +++ b/target/linux/lantiq/dts/danube.dtsi @@ -197,8 +197,8 @@ 0xE105400 0x400>; /* pci bridge */ lantiq,bus-clock = <33333333>; interrupt-map-mask = <0xf800 0x0 0x0 0x7>; - interrupt-map = <0x7000 0 0 1 &icu0 30 1>; - req-mask = <0x1>; + interrupt-map = <0x7000 0 0 1 &icu0 30 1>; /* slot 14, irq 30 */ + req-mask = <0x1>; /* GNT1 */ }; }; diff --git a/target/linux/lantiq/dts/vr9.dtsi b/target/linux/lantiq/dts/vr9.dtsi index 1a50d0ebc8..5478e1a9df 100644 --- a/target/linux/lantiq/dts/vr9.dtsi +++ b/target/linux/lantiq/dts/vr9.dtsi @@ -116,7 +116,7 @@ compatible = "lantiq,gptu-xway"; reg = <0xE100A00 0x100>; interrupt-parent = <&icu0>; - interrupts = <126 127 128 129 130 131>; + interrupts = <126 127 128 129 130 131>; }; asc0: serial@E100400 { @@ -219,6 +219,8 @@ }; pci0: pci@E105400 { + status = "disabled"; + #address-cells = <3>; #size-cells = <2>; #interrupt-cells = <1>; @@ -228,7 +230,10 @@ 0x1000000 0 0x00000000 0xAE00000 0 0x200000>; /* io space */ reg = <0x7000000 0x8000 /* config space */ 0xE105400 0x400>; /* pci bridge */ - status = "disabled"; + lantiq,bus-clock = <33333333>; + interrupt-map-mask = <0xf800 0x0 0x0 0x7>; + interrupt-map = <0x7000 0 0 1 &icu0 30 1>; /* slot 14, irq 30 */ + req-mask = <0x1>; /* GNT1 */ }; };