From: Mathias Kresin Date: Sat, 18 Aug 2018 09:09:29 +0000 (+0200) Subject: ramips: remove default on userspace trigger for diag leds X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=111907e8d319eb05e7a5ef7a0cc6ec55cb069242;p=openwrt%2Fstaging%2Fthess.git ramips: remove default on userspace trigger for diag leds All the LEDs are turned on by diag.sh at the end of the boot process. No need to do the same via userspace configuration again. Signed-off-by: Mathias Kresin --- diff --git a/target/linux/ramips/base-files/etc/board.d/01_leds b/target/linux/ramips/base-files/etc/board.d/01_leds index 0dd37a2637..6da04ea9b1 100755 --- a/target/linux/ramips/base-files/etc/board.d/01_leds +++ b/target/linux/ramips/base-files/etc/board.d/01_leds @@ -44,10 +44,6 @@ br-6475nd|\ mzk-w300nh2) set_wifi_led "$boardname:amber:wlan" ;; -a5-v11|\ -cs-qr10) - ucidef_set_led_default "power" "POWER" "$boardname:red:power" "1" - ;; ai-br100) ucidef_set_led_netdev "wan" "wan" "$boardname:blue:wan" "eth0.2" set_wifi_led "$boardname:blue:wlan" @@ -78,7 +74,6 @@ awapn2403) ;; asl26555-8M|\ asl26555-16M) - ucidef_set_led_default "power" "POWER" "asl26555:green:power" "1" ucidef_set_led_netdev "eth" "ETH" "asl26555:green:eth" "eth0" set_wifi_led "asl26555:green:wlan" set_usb_led "asl26555:green:3g" @@ -116,22 +111,16 @@ cy-swr1100) set_usb_led "$boardname:blue:usb" ;; d105) - ucidef_set_led_default "power" "POWER" "$boardname:red:power" "1" set_usb_led "$boardname:green:usb" ;; d240) set_wifi_led "$boardname:blue:wifi" set_usb_led "$boardname:blue:usb" ;; -db-wrt01) - ucidef_set_led_default "power" "power" "$boardname:orange:power" "1" - ;; dch-m225) - ucidef_set_led_default "power" "POWER" "$board:geeen:power" "1" ucidef_set_led_default "status" "STATUS" "$board:red:status" "0" ;; dcs-930l-b1) - ucidef_set_led_default "power" "POWER" "$boardname:red:power" "1" ucidef_set_led_netdev "wifi" "WiFi" "$boardname:blue:wps" ;; dir-300-b1|\ @@ -174,15 +163,6 @@ dlink,dwr-921-c1) ucidef_set_led_switch "lan" "lan" "$boardname:green:lan" "switch0" "0x0f" ucidef_set_led_default "sigstrength" "Signal Strength" "$boardname:green:sigstrength" "0" ;; -dir-810l|\ -elecom,wrc-1167ghbk2-s|\ -iodata,wn-ax1167gr|\ -iodata,wn-gx300gr|\ -mzk-750dhp|\ -mzk-dp150n|\ -vr500) - ucidef_set_led_default "power" "power" "$boardname:green:power" "1" - ;; dir-860l-b1) ucidef_set_led_netdev "wan" "wan" "$boardname:green:net" "eth0.2" ;; @@ -225,18 +205,15 @@ gl-mt300n-v2) ;; hc5661|\ hc5661a) - ucidef_set_led_default "system" "system" "$boardname:blue:system" "1" ucidef_set_led_netdev "internet" "internet" "$boardname:blue:internet" "eth0.2" set_wifi_led "$boardname:blue:wlan2g" ;; hc5761) - ucidef_set_led_default "system" "system" "$boardname:blue:system" "1" ucidef_set_led_netdev "internet" "internet" "$boardname:blue:internet" "eth0.2" set_wifi_led "$boardname:blue:wlan2g" ucidef_set_led_netdev "wifi5g" "wifi5g" "$boardname:blue:wlan5g" "rai0" ;; hc5861) - ucidef_set_led_default "system" "system" "$boardname:blue:system" "1" ucidef_set_led_netdev "internet" "internet" "$boardname:blue:internet" "eth0.2" set_wifi_led "$boardname:blue:wlan2g" ucidef_set_led_netdev "wifi5g" "wifi5g" "$boardname:blue:wlan5g" "rai0" @@ -301,7 +278,6 @@ mir3g) mlw221|\ mlwg2) set_wifi_led "$boardname:blue:wifi" - ucidef_set_led_default "system" "system" "$boardname:blue:system" "1" ;; mpr-a1|\ mpr-a2) @@ -312,13 +288,11 @@ mr-102n) set_usb_led "$boardname:green:usb" ;; mr200) - ucidef_set_led_default "power" "power" "$boardname:white:power" "1" ucidef_set_led_netdev "lan" "lan" "$boardname:white:lan" "eth0.1" ucidef_set_led_netdev "wan" "wan" "$boardname:white:wan" "usb0" set_wifi_led "$boardname:white:wlan" ;; mzk-ex750np) - ucidef_set_led_default "power" "power" "$boardname:red:power" "1" set_wifi_led "$boardname:red:wifi" ;; na930) @@ -333,7 +307,6 @@ nw718) set_usb_led "$boardname:amber:usb" ;; oy-0001) - ucidef_set_led_default "power" "power" "$boardname:green:power" "1" set_wifi_led "$boardname:green:wifi" ;; pbr-d1) @@ -341,7 +314,6 @@ pbr-d1) ;; pbr-m1) ucidef_set_led_netdev "internet" "internet" "$boardname:blue:internet" "eth0.2" - ucidef_set_led_default "power" "power" "$boardname:blue:power" "1" ucidef_set_led_default "sys" "sys" "$boardname:blue:sys" "1" ;; d-team,newifi-d2) @@ -370,7 +342,6 @@ re350-v1) ucidef_set_led_switch "eth_link" "LAN link" "$boardname:green:eth_link" "switch0" "0x01" ;; re6500) - ucidef_set_led_default "power" "power" "$boardname:white:power" "1" ucidef_set_led_default "wifi" "wifi" "$boardname:orange:wifi" "1" ;; rp-n53) @@ -382,13 +353,11 @@ rt-ac51u) set_usb_led "$boardname:blue:usb" "1-1" ;; rt-n12p) - ucidef_set_led_default "power" "power" "$boardname:green:power" "1" ucidef_set_led_netdev "lan" "lan" "$boardname:green:lan" eth0.1 ucidef_set_led_netdev "wan" "wan" "$boardname:green:wan" eth0.2 set_wifi_led "$boardname:green:air" ;; rt-n14u) - ucidef_set_led_default "power" "power" "$boardname:blue:power" "1" ucidef_set_led_netdev "lan" "lan" "$boardname:blue:lan" eth0.1 ucidef_set_led_netdev "wan" "wan" "$boardname:blue:wan" eth0.2 set_wifi_led "$boardname:blue:air" @@ -497,7 +466,6 @@ we1026-5g-16m) whr-1166d|\ whr-300hp2|\ whr-600d) - ucidef_set_led_default "power" "power" "$boardname:green:power" "1" ucidef_set_led_default "router" "router" "$boardname:green:router" "1" ;; wl-wn575a3) @@ -543,7 +511,6 @@ zbt-cpe102) ucidef_set_led_default "power" "power" "$boardname:green:4g-0" "0" ;; zbt-wa05) - ucidef_set_led_default "power" "power" "$boardname:blue:power" "1" set_wifi_led "$boardname:blue:air" set_usb_led "$boardname:blue:usb" ;; @@ -562,7 +529,6 @@ zbtlink,zbt-we1226) ucidef_set_led_switch "wan" "WAN" "$boardname:green:wan" "switch0" "0x10" ;; zbt-wr8305rt) - ucidef_set_led_default "power" "power" "$boardname:green:sys" "1" set_usb_led "$boardname:green:usb" set_wifi_led "$boardname:green:wifi" ;;