From: Hauke Mehrtens Date: Sun, 7 Jul 2019 11:38:37 +0000 (+0200) Subject: ath10k-ct: remove patches for old versions X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=10fe5ca3629c4739763df0274610b43eebd1ee3a;p=openwrt%2Fstaging%2Fwigyori.git ath10k-ct: remove patches for old versions the ath10k-ct package ships multiple versions of the ath10k-ct driver, OpenWrt currently only uses the version 4.19, but we still ship some patches for older versions. Remove all patches only touching older versions and also remove the patch for older versions from patches which do the same changes to multiple versions of ath10k-ct. This removes some unneeded patches, the end binary should stay the same. Signed-off-by: Hauke Mehrtens --- diff --git a/package/kernel/ath10k-ct/patches/081-ath10k-calibration-variant.patch b/package/kernel/ath10k-ct/patches/081-ath10k-calibration-variant.patch deleted file mode 100644 index 55a75dafb6..0000000000 --- a/package/kernel/ath10k-ct/patches/081-ath10k-calibration-variant.patch +++ /dev/null @@ -1,113 +0,0 @@ -From d06f26c5c8a41f246a9c40862a77a55725cedbd3 Mon Sep 17 00:00:00 2001 -From: Sven Eckelmann -Date: Fri, 8 Dec 2017 11:37:42 +0100 -Subject: ath10k: search DT for qcom,ath10k-calibration-variant - -Board Data File (BDF) is loaded upon driver boot-up procedure. The right -board data file is identified on QCA4019 using bus, bmi-chip-id and -bmi-board-id. - -The problem, however, can occur when the (default) board data file cannot -fulfill with the vendor requirements and it is necessary to use a different -board data file. - -This problem was solved for SMBIOS by adding a special SMBIOS type 0xF8. -Something similar has to be provided for systems without SMBIOS but with -device trees. No solution was specified by QCA and therefore a new one has -to be found for ath10k. - -The device tree requires addition strings to define the variant name - - wifi@a000000 { - status = "okay"; - qcom,ath10k-calibration-variant = "RT-AC58U"; - }; - - wifi@a800000 { - status = "okay"; - qcom,ath10k-calibration-variant = "RT-AC58U"; - }; - -This would create the boarddata identifiers for the board-2.bin search - - * bus=ahb,bmi-chip-id=0,bmi-board-id=16,variant=RT-AC58U - * bus=ahb,bmi-chip-id=0,bmi-board-id=17,variant=RT-AC58U - -Signed-off-by: Sven Eckelmann -Signed-off-by: Kalle Valo - -Origin: upstream, https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=d06f26c5c8a41f246a9c40862a77a55725cedbd3 ---- - ath10k-4.13/core.c | 40 ++++++++++++++++++++++++++++------ - 1 file changed, 33 insertions(+), 7 deletions(-) - ---- a/ath10k-4.13/core.c -+++ b/ath10k-4.13/core.c -@@ -899,6 +899,28 @@ static int ath10k_core_check_smbios(stru - return 0; - } - -+static int ath10k_core_check_dt(struct ath10k *ar) -+{ -+ struct device_node *node; -+ const char *variant = NULL; -+ -+ node = ar->dev->of_node; -+ if (!node) -+ return -ENOENT; -+ -+ of_property_read_string(node, "qcom,ath10k-calibration-variant", -+ &variant); -+ if (!variant) -+ return -ENODATA; -+ -+ if (strscpy(ar->id.bdf_ext, variant, sizeof(ar->id.bdf_ext)) < 0) -+ ath10k_dbg(ar, ATH10K_DBG_BOOT, -+ "bdf variant string is longer than the buffer can accommodate (variant: %s)\n", -+ variant); -+ -+ return 0; -+} -+ - static int ath10k_download_and_run_otp(struct ath10k *ar) - { - u32 result, address = ar->hw_params.patch_load_addr; -@@ -1538,19 +1560,19 @@ static int ath10k_core_create_board_name - /* strlen(',variant=') + strlen(ar->id.bdf_ext) */ - char variant[9 + ATH10K_SMBIOS_BDF_EXT_STR_LENGTH] = { 0 }; - -+ if (ar->id.bdf_ext[0] != '\0') -+ scnprintf(variant, sizeof(variant), ",variant=%s", -+ ar->id.bdf_ext); -+ - if (ar->id.bmi_ids_valid) { - scnprintf(name, name_len, -- "bus=%s,bmi-chip-id=%d,bmi-board-id=%d", -+ "bus=%s,bmi-chip-id=%d,bmi-board-id=%d%s", - ath10k_bus_str(ar->hif.bus), - ar->id.bmi_chip_id, -- ar->id.bmi_board_id); -+ ar->id.bmi_board_id, variant); - goto out; - } - -- if (ar->id.bdf_ext[0] != '\0') -- scnprintf(variant, sizeof(variant), ",variant=%s", -- ar->id.bdf_ext); -- - scnprintf(name, name_len, - "bus=%s,vendor=%04x,device=%04x,subsystem-vendor=%04x,subsystem-device=%04x%s", - ath10k_bus_str(ar->hif.bus), -@@ -3034,7 +3056,11 @@ static int ath10k_core_probe_fw(struct a - - ret = ath10k_core_check_smbios(ar); - if (ret) -- ath10k_dbg(ar, ATH10K_DBG_BOOT, "bdf variant name not set.\n"); -+ ath10k_dbg(ar, ATH10K_DBG_BOOT, "SMBIOS bdf variant name not set.\n"); -+ -+ ret = ath10k_core_check_dt(ar); -+ if (ret) -+ ath10k_dbg(ar, ATH10K_DBG_BOOT, "DT bdf variant name not set.\n"); - - ret = ath10k_core_fetch_board_file(ar); - if (ret) { diff --git a/package/kernel/ath10k-ct/patches/100-kernel_compat.patch b/package/kernel/ath10k-ct/patches/100-kernel_compat.patch deleted file mode 100644 index 3f7db04376..0000000000 --- a/package/kernel/ath10k-ct/patches/100-kernel_compat.patch +++ /dev/null @@ -1,119 +0,0 @@ ---- a/ath10k/debug.c -+++ b/ath10k/debug.c -@@ -166,11 +166,11 @@ void ath10k_debug_print_hwfw_info(struct - ar->id.subsystem_vendor, ar->id.subsystem_device); - - ath10k_info(ar, "kconfig debug %d debugfs %d tracing %d dfs %d testmode %d\n", -- config_enabled(CONFIG_ATH10K_DEBUG), -- config_enabled(CONFIG_ATH10K_DEBUGFS), -- config_enabled(CONFIG_ATH10K_TRACING), -- config_enabled(CONFIG_ATH10K_DFS_CERTIFIED), -- config_enabled(CONFIG_NL80211_TESTMODE)); -+ IS_ENABLED(CONFIG_ATH10K_DEBUG), -+ IS_ENABLED(CONFIG_ATH10K_DEBUGFS), -+ IS_ENABLED(CONFIG_ATH10K_TRACING), -+ IS_ENABLED(CONFIG_ATH10K_DFS_CERTIFIED), -+ IS_ENABLED(CONFIG_NL80211_TESTMODE)); - - firmware = ar->normal_mode_fw.fw_file.firmware; - if (firmware) -@@ -3422,7 +3422,7 @@ int ath10k_debug_register(struct ath10k - debugfs_create_file("nf_cal_period", S_IRUSR | S_IWUSR, - ar->debug.debugfs_phy, ar, &fops_nf_cal_period); - -- if (config_enabled(CONFIG_ATH10K_DFS_CERTIFIED)) { -+ if (IS_ENABLED(CONFIG_ATH10K_DFS_CERTIFIED)) { - debugfs_create_file("dfs_simulate_radar", S_IWUSR, - ar->debug.debugfs_phy, ar, - &fops_simulate_radar); ---- a/ath10k/mac.c -+++ b/ath10k/mac.c -@@ -3604,7 +3604,7 @@ static void ath10k_regd_update(struct at - - regpair = ar->ath_common.regulatory.regpair; - -- if (config_enabled(CONFIG_ATH10K_DFS_CERTIFIED) && ar->dfs_detector) { -+ if (IS_ENABLED(CONFIG_ATH10K_DFS_CERTIFIED) && ar->dfs_detector) { - nl_dfs_reg = ar->dfs_detector->region; - wmi_dfs_reg = ath10k_mac_get_dfs_region(nl_dfs_reg); - ath10k_dbg(ar, ATH10K_DBG_REGULATORY, -@@ -3638,7 +3638,7 @@ static void ath10k_reg_notifier(struct w - - ath_reg_notifier_apply(wiphy, request, &ar->ath_common.regulatory); - -- if (config_enabled(CONFIG_ATH10K_DFS_CERTIFIED) && ar->dfs_detector) { -+ if (IS_ENABLED(CONFIG_ATH10K_DFS_CERTIFIED) && ar->dfs_detector) { - ath10k_dbg(ar, ATH10K_DBG_REGULATORY, "reg-notifier: dfs region 0x%x\n", - request->dfs_region); - result = ar->dfs_detector->set_dfs_domain(ar->dfs_detector, -@@ -8939,7 +8939,7 @@ int ath10k_mac_register(struct ath10k *a - if (!test_bit(ATH10K_FLAG_RAW_MODE, &ar->dev_flags)) - ar->hw->netdev_features = NETIF_F_HW_CSUM; - -- if (config_enabled(CONFIG_ATH10K_DFS_CERTIFIED)) { -+ if (IS_ENABLED(CONFIG_ATH10K_DFS_CERTIFIED)) { - /* Init ath dfs pattern detector */ - ar->ath_common.debug_mask = ATH_DBG_DFS; - ar->dfs_detector = dfs_pattern_detector_init(&ar->ath_common, -@@ -8984,7 +8984,7 @@ err_unregister: - ieee80211_unregister_hw(ar->hw); - - err_dfs_detector_exit: -- if (config_enabled(CONFIG_ATH10K_DFS_CERTIFIED) && ar->dfs_detector) -+ if (IS_ENABLED(CONFIG_ATH10K_DFS_CERTIFIED) && ar->dfs_detector) - ar->dfs_detector->exit(ar->dfs_detector); - - err_free: -@@ -8999,7 +8999,7 @@ void ath10k_mac_unregister(struct ath10k - { - ieee80211_unregister_hw(ar->hw); - -- if (config_enabled(CONFIG_ATH10K_DFS_CERTIFIED) && ar->dfs_detector) -+ if (IS_ENABLED(CONFIG_ATH10K_DFS_CERTIFIED) && ar->dfs_detector) - ar->dfs_detector->exit(ar->dfs_detector); - - kfree(ar->mac.sbands[NL80211_BAND_2GHZ].channels); ---- a/ath10k/thermal.c -+++ b/ath10k/thermal.c -@@ -192,7 +192,7 @@ int ath10k_thermal_register(struct ath10 - - /* Avoid linking error on devm_hwmon_device_register_with_groups, I - * guess linux/hwmon.h is missing proper stubs. */ -- if (!config_enabled(CONFIG_HWMON)) -+ if (!IS_ENABLED(CONFIG_HWMON)) - return 0; - - hwmon_dev = devm_hwmon_device_register_with_groups(ar->dev, ---- a/ath10k/wmi.c -+++ b/ath10k/wmi.c -@@ -3903,7 +3903,7 @@ void ath10k_wmi_event_dfs(struct ath10k - phyerr->tsf_timestamp, tsf, buf_len); - - /* Skip event if DFS disabled */ -- if (!config_enabled(CONFIG_ATH10K_DFS_CERTIFIED)) -+ if (!IS_ENABLED(CONFIG_ATH10K_DFS_CERTIFIED)) - return; - - ATH10K_DFS_STAT_INC(ar, pulses_total); ---- a/ath10k-4.13/wmi.c -+++ b/ath10k-4.13/wmi.c -@@ -4033,7 +4033,7 @@ static void ath10k_dfs_radar_report(stru - - ATH10K_DFS_STAT_INC(ar, pulses_detected); - -- if (!ar->dfs_detector->add_pulse(ar->dfs_detector, &pe)) { -+ if (!ar->dfs_detector->add_pulse(ar->dfs_detector, &pe, NULL)) { - ath10k_dbg(ar, ATH10K_DBG_REGULATORY, - "dfs no pulse pattern detected, yet\n"); - return; ---- a/ath10k-4.16/wmi.c -+++ b/ath10k-4.16/wmi.c -@@ -4117,7 +4117,7 @@ static void ath10k_dfs_radar_report(stru - - ATH10K_DFS_STAT_INC(ar, pulses_detected); - -- if (!ar->dfs_detector->add_pulse(ar->dfs_detector, &pe)) { -+ if (!ar->dfs_detector->add_pulse(ar->dfs_detector, &pe, NULL)) { - ath10k_dbg(ar, ATH10K_DBG_REGULATORY, - "dfs no pulse pattern detected, yet\n"); - return; diff --git a/package/kernel/ath10k-ct/patches/110-api_fix.patch b/package/kernel/ath10k-ct/patches/110-api_fix.patch deleted file mode 100644 index 9439dd79ed..0000000000 --- a/package/kernel/ath10k-ct/patches/110-api_fix.patch +++ /dev/null @@ -1,11 +0,0 @@ ---- a/ath10k/htt_rx.c -+++ b/ath10k/htt_rx.c -@@ -2514,7 +2514,7 @@ bool ath10k_htt_t2h_msg_handler(struct a - u32 freq = __le32_to_cpu(resp->chan_change.freq); - - ar->tgt_oper_chan = -- __ieee80211_get_channel(ar->hw->wiphy, freq); -+ ieee80211_get_channel(ar->hw->wiphy, freq); - ath10k_dbg(ar, ATH10K_DBG_HTT, - "htt chan change freq %u phymode %s\n", - freq, ath10k_wmi_phymode_str(phymode)); diff --git a/package/kernel/ath10k-ct/patches/120-mac80211-4-14-api.patch b/package/kernel/ath10k-ct/patches/120-mac80211-4-14-api.patch deleted file mode 100644 index d587632692..0000000000 --- a/package/kernel/ath10k-ct/patches/120-mac80211-4-14-api.patch +++ /dev/null @@ -1,104 +0,0 @@ ---- a/ath10k/htt_rx.c -+++ b/ath10k/htt_rx.c -@@ -642,11 +642,11 @@ static void ath10k_htt_rx_h_rates(struct - sgi = (info3 >> 7) & 1; - - status->rate_idx = mcs; -- status->flag |= RX_FLAG_HT; -+ status->encoding = RX_ENC_HT; - if (sgi) -- status->flag |= RX_FLAG_SHORT_GI; -+ status->enc_flags |= RX_ENC_FLAG_SHORT_GI; - if (bw) -- status->flag |= RX_FLAG_40MHZ; -+ status->bw = RATE_INFO_BW_40; - break; - case HTT_RX_VHT: - case HTT_RX_VHT_WITH_TXBF: -@@ -698,10 +698,10 @@ static void ath10k_htt_rx_h_rates(struct - } - - status->rate_idx = mcs; -- status->vht_nss = nss; -+ status->nss = nss; - - if (sgi) -- status->flag |= RX_FLAG_SHORT_GI; -+ status->enc_flags |= RX_ENC_FLAG_SHORT_GI; - - switch (bw) { - /* 20MHZ */ -@@ -709,18 +709,18 @@ static void ath10k_htt_rx_h_rates(struct - break; - /* 40MHZ */ - case 1: -- status->flag |= RX_FLAG_40MHZ; -+ status->bw = RATE_INFO_BW_40; - break; - /* 80MHZ */ - case 2: -- status->vht_flag |= RX_VHT_FLAG_80MHZ; -+ status->bw = RATE_INFO_BW_80; - break; - case 3: -- status->vht_flag |= RX_VHT_FLAG_160MHZ; -+ status->bw = RATE_INFO_BW_160; - break; - } - -- status->flag |= RX_FLAG_VHT; -+ status->encoding = RX_ENC_VHT; - break; - default: - break; -@@ -900,13 +900,10 @@ static void ath10k_htt_rx_h_ppdu(struct - /* New PPDU starts so clear out the old per-PPDU status. */ - status->freq = 0; - status->rate_idx = 0; -- status->vht_nss = 0; -- status->vht_flag &= ~RX_VHT_FLAG_80MHZ; -- status->flag &= ~(RX_FLAG_HT | -- RX_FLAG_VHT | -- RX_FLAG_SHORT_GI | -- RX_FLAG_40MHZ | -- RX_FLAG_MACTIME_END); -+ status->nss = 0; -+ status->encoding = RX_ENC_LEGACY; -+ status->bw = RATE_INFO_BW_20; -+ status->flag &= ~RX_FLAG_MACTIME_END; - status->flag |= RX_FLAG_NO_SIGNAL_VAL; - - ath10k_htt_rx_h_signal(ar, status, rxd); -@@ -959,7 +956,7 @@ static void ath10k_process_rx(struct ath - *status = *rx_status; - - ath10k_dbg(ar, ATH10K_DBG_DATA, -- "rx skb %p len %u peer %pM %s %s sn %u %s%s%s%s%s%s %srate_idx %u vht_nss %u freq %u band %u flag 0x%llx fcs-err %i mic-err %i amsdu-more %i\n", -+ "rx skb %p len %u peer %pM %s %s sn %u %s%s%s%s%s%s %srate_idx %u vht_nss %u freq %u band %u flag 0x%x fcs-err %i mic-err %i amsdu-more %i\n", - skb, - skb->len, - ieee80211_get_SA(hdr), -@@ -967,15 +964,15 @@ static void ath10k_process_rx(struct ath - is_multicast_ether_addr(ieee80211_get_DA(hdr)) ? - "mcast" : "ucast", - (__le16_to_cpu(hdr->seq_ctrl) & IEEE80211_SCTL_SEQ) >> 4, -- status->flag == 0 ? "legacy" : "", -- status->flag & RX_FLAG_HT ? "ht" : "", -- status->flag & RX_FLAG_VHT ? "vht" : "", -- status->flag & RX_FLAG_40MHZ ? "40" : "", -- status->vht_flag & RX_VHT_FLAG_80MHZ ? "80" : "", -- status->vht_flag & RX_VHT_FLAG_160MHZ ? "160" : "", -- status->flag & RX_FLAG_SHORT_GI ? "sgi " : "", -+ (status->encoding == RX_ENC_LEGACY) ? "legacy" : "", -+ (status->encoding == RX_ENC_HT) ? "ht" : "", -+ (status->encoding == RX_ENC_VHT) ? "vht" : "", -+ (status->bw == RATE_INFO_BW_40) ? "40" : "", -+ (status->bw == RATE_INFO_BW_80) ? "80" : "", -+ (status->bw == RATE_INFO_BW_160) ? "160" : "", -+ status->enc_flags & RX_ENC_FLAG_SHORT_GI ? "sgi " : "", - status->rate_idx, -- status->vht_nss, -+ status->nss, - status->freq, - status->band, status->flag, - !!(status->flag & RX_FLAG_FAILED_FCS_CRC), diff --git a/package/kernel/ath10k-ct/patches/160-ath10k-search-all-IEs-for-variant-before-falling-back.patch b/package/kernel/ath10k-ct/patches/160-ath10k-search-all-IEs-for-variant-before-falling-back.patch deleted file mode 100644 index 69b0bdeb10..0000000000 --- a/package/kernel/ath10k-ct/patches/160-ath10k-search-all-IEs-for-variant-before-falling-back.patch +++ /dev/null @@ -1,448 +0,0 @@ -From: Thomas Hebb -Date: Fri, 13 Apr 2018 17:40:26 +0300 -Subject: [PATCH] ath10k: search all IEs for variant before falling back - -commit f2593cb1b291 ("ath10k: Search SMBIOS for OEM board file -extension") added a feature to ath10k that allows Board Data File -(BDF) conflicts between multiple devices that use the same device IDs -but have different calibration requirements to be resolved by allowing -a "variant" string to be stored in SMBIOS [and later device tree, added -by commit d06f26c5c8a4 ("ath10k: search DT for qcom,ath10k-calibration- -variant")] that gets appended to the ID stored in board-2.bin. - -This original patch had a regression, however. Namely that devices with -a variant present in SMBIOS that didn't need custom BDFs could no longer -find the default BDF, which has no variant appended. The patch was -reverted and re-applied with a fix for this issue in commit 1657b8f84ed9 -("search SMBIOS for OEM board file extension"). - -But the fix to fall back to a default BDF introduced another issue: the -driver currently parses IEs in board-2.bin one by one, and for each one -it first checks to see if it matches the ID with the variant appended. -If it doesn't, it checks to see if it matches the "fallback" ID with no -variant. If a matching BDF is found at any point during this search, the -search is terminated and that BDF is used. The issue is that it's very -possible (and is currently the case for board-2.bin files present in the -ath10k-firmware repository) for the default BDF to occur in an earlier -IE than the variant-specific BDF. In this case, the current code will -happily choose the default BDF even though a better-matching BDF is -present later in the file. - -This patch fixes the issue by first searching the entire file for the ID -with variant, and searching for the fallback ID only if that search -fails. It also includes some code cleanup in the area, as -ath10k_core_fetch_board_data_api_n() no longer does its own string -mangling to remove the variant from an ID, instead leaving that job to a -new flag passed to ath10k_core_create_board_name(). - -I've tested this patch on a QCA4019 and verified that the driver behaves -correctly for 1) both fallback and variant BDFs present, 2) only fallback -BDF present, and 3) no matching BDFs present. - -Fixes: 1657b8f84ed9 ("ath10k: search SMBIOS for OEM board file extension") -Signed-off-by: Thomas Hebb -Signed-off-by: Kalle Valo - -Origin: backport, https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=c8489668065a283d3027e86e877b103a87f99d22 ---- - ath10k-4.13/core.c | 134 ++++++++++++++++++--------------- - 1 file changed, 72 insertions(+), 62 deletions(-) - ---- a/ath10k-4.13/core.c -+++ b/ath10k-4.13/core.c -@@ -1435,14 +1435,61 @@ out: - return ret; - } - -+static int ath10k_core_search_bd(struct ath10k *ar, -+ const char *boardname, -+ const u8 *data, -+ size_t len) -+{ -+ size_t ie_len; -+ struct ath10k_fw_ie *hdr; -+ int ret = -ENOENT, ie_id; -+ -+ while (len > sizeof(struct ath10k_fw_ie)) { -+ hdr = (struct ath10k_fw_ie *)data; -+ ie_id = le32_to_cpu(hdr->id); -+ ie_len = le32_to_cpu(hdr->len); -+ -+ len -= sizeof(*hdr); -+ data = hdr->data; -+ -+ if (len < ALIGN(ie_len, 4)) { -+ ath10k_err(ar, "invalid length for board ie_id %d ie_len %zu len %zu\n", -+ ie_id, ie_len, len); -+ return -EINVAL; -+ } -+ -+ switch (ie_id) { -+ case ATH10K_BD_IE_BOARD: -+ ret = ath10k_core_parse_bd_ie_board(ar, data, ie_len, -+ boardname); -+ if (ret == -ENOENT) -+ /* no match found, continue */ -+ break; -+ -+ /* either found or error, so stop searching */ -+ goto out; -+ } -+ -+ /* jump over the padding */ -+ ie_len = ALIGN(ie_len, 4); -+ -+ len -= ie_len; -+ data += ie_len; -+ } -+ -+out: -+ /* return result of parse_bd_ie_board() or -ENOENT */ -+ return ret; -+} -+ - static int ath10k_core_fetch_board_data_api_n(struct ath10k *ar, - const char *boardname, -+ const char *fallback_boardname, - const char *filename) - { -- size_t len, magic_len, ie_len; -- struct ath10k_fw_ie *hdr; -+ size_t len, magic_len; - const u8 *data; -- int ret, ie_id; -+ int ret; - - ar->normal_mode_fw.board = ath10k_fetch_fw_file(ar, - ar->hw_params.fw.dir, -@@ -1480,73 +1527,28 @@ static int ath10k_core_fetch_board_data_ - data += magic_len; - len -= magic_len; - -- while (len > sizeof(struct ath10k_fw_ie)) { -- hdr = (struct ath10k_fw_ie *)data; -- ie_id = le32_to_cpu(hdr->id); -- ie_len = le32_to_cpu(hdr->len); -- -- len -= sizeof(*hdr); -- data = hdr->data; -- -- if (len < ALIGN(ie_len, 4)) { -- ath10k_err(ar, "invalid length for board ie_id %d ie_len %zu len %zu\n", -- ie_id, ie_len, len); -- ret = -EINVAL; -- goto err; -- } -- -- switch (ie_id) { -- case ATH10K_BD_IE_BOARD: -- ret = ath10k_core_parse_bd_ie_board(ar, data, ie_len, -- boardname); -- if (ret == -ENOENT && ar->id.bdf_ext[0] != '\0') { -- /* try default bdf if variant was not found */ -- char *s, *v = ",variant="; -- char boardname2[100]; -- -- strlcpy(boardname2, boardname, -- sizeof(boardname2)); -- -- s = strstr(boardname2, v); -- if (s) -- *s = '\0'; /* strip ",variant=%s" */ -- -- ret = ath10k_core_parse_bd_ie_board(ar, data, -- ie_len, -- boardname2); -- } -- -- if (ret == -ENOENT) -- /* no match found, continue */ -- break; -- else if (ret) -- /* there was an error, bail out */ -- goto err; -- -- /* board data found */ -- goto out; -- } -+ /* attempt to find boardname in the IE list */ -+ ret = ath10k_core_search_bd(ar, boardname, data, len); - -- /* jump over the padding */ -- ie_len = ALIGN(ie_len, 4); -- -- len -= ie_len; -- data += ie_len; -- } -+ /* if we didn't find it and have a fallback name, try that */ -+ if (ret == -ENOENT && fallback_boardname) -+ ret = ath10k_core_search_bd(ar, fallback_boardname, data, len); - - out: -- if (!ar->normal_mode_fw.board_data || !ar->normal_mode_fw.board_len) { -+ if (ret == -ENOENT) { - ath10k_err(ar, - "failed to fetch board data for %s from %s/%s\n", - boardname, ar->hw_params.fw.dir, filename); - ret = -ENODATA; -- goto err; - } - - /* Save firmware board name so we can display it later. */ - strlcpy(ar->normal_mode_fw.fw_file.fw_board_name, filename, - sizeof(ar->normal_mode_fw.fw_file.fw_board_name)); - -+ if (ret) -+ goto err; -+ - return 0; - - err: -@@ -1555,12 +1557,12 @@ err: - } - - static int ath10k_core_create_board_name(struct ath10k *ar, char *name, -- size_t name_len) -+ size_t name_len, bool with_variant) - { - /* strlen(',variant=') + strlen(ar->id.bdf_ext) */ - char variant[9 + ATH10K_SMBIOS_BDF_EXT_STR_LENGTH] = { 0 }; - -- if (ar->id.bdf_ext[0] != '\0') -+ if (with_variant && ar->id.bdf_ext[0] != '\0') - scnprintf(variant, sizeof(variant), ",variant=%s", - ar->id.bdf_ext); - -@@ -1586,21 +1588,31 @@ out: - - static int ath10k_core_fetch_board_file(struct ath10k *ar) - { -- char boardname[100]; -+ char boardname[100], fallback_boardname[100]; - int ret; - -- ret = ath10k_core_create_board_name(ar, boardname, sizeof(boardname)); -+ ret = ath10k_core_create_board_name(ar, boardname, -+ sizeof(boardname), true); - if (ret) { - ath10k_err(ar, "failed to create board name: %d", ret); - return ret; - } - -+ ret = ath10k_core_create_board_name(ar, fallback_boardname, -+ sizeof(boardname), false); -+ if (ret) { -+ ath10k_err(ar, "failed to create fallback board name: %d", ret); -+ return ret; -+ } -+ - ar->bd_api = 2; - if (ar->fwcfg.bname[0]) - ret = ath10k_core_fetch_board_data_api_n(ar, boardname, -+ fallback_boardname, - ar->fwcfg.bname); - else - ret = ath10k_core_fetch_board_data_api_n(ar, boardname, -+ fallback_boardname, - ATH10K_BOARD_API2_FILE); - if (!ret) - goto success; ---- a/ath10k-4.16/core.c -+++ b/ath10k-4.16/core.c -@@ -1569,14 +1569,61 @@ out: - return ret; - } - -+static int ath10k_core_search_bd(struct ath10k *ar, -+ const char *boardname, -+ const u8 *data, -+ size_t len) -+{ -+ size_t ie_len; -+ struct ath10k_fw_ie *hdr; -+ int ret = -ENOENT, ie_id; -+ -+ while (len > sizeof(struct ath10k_fw_ie)) { -+ hdr = (struct ath10k_fw_ie *)data; -+ ie_id = le32_to_cpu(hdr->id); -+ ie_len = le32_to_cpu(hdr->len); -+ -+ len -= sizeof(*hdr); -+ data = hdr->data; -+ -+ if (len < ALIGN(ie_len, 4)) { -+ ath10k_err(ar, "invalid length for board ie_id %d ie_len %zu len %zu\n", -+ ie_id, ie_len, len); -+ return -EINVAL; -+ } -+ -+ switch (ie_id) { -+ case ATH10K_BD_IE_BOARD: -+ ret = ath10k_core_parse_bd_ie_board(ar, data, ie_len, -+ boardname); -+ if (ret == -ENOENT) -+ /* no match found, continue */ -+ break; -+ -+ /* either found or error, so stop searching */ -+ goto out; -+ } -+ -+ /* jump over the padding */ -+ ie_len = ALIGN(ie_len, 4); -+ -+ len -= ie_len; -+ data += ie_len; -+ } -+ -+out: -+ /* return result of parse_bd_ie_board() or -ENOENT */ -+ return ret; -+} -+ - static int ath10k_core_fetch_board_data_api_n(struct ath10k *ar, - const char *boardname, -+ const char *fallback_boardname, - const char *filename) - { -- size_t len, magic_len, ie_len; -- struct ath10k_fw_ie *hdr; -+ size_t len, magic_len; - const u8 *data; -- int ret, ie_id; -+ int ret; - - ar->normal_mode_fw.board = ath10k_fetch_fw_file(ar, - ar->hw_params.fw.dir, -@@ -1614,73 +1661,28 @@ static int ath10k_core_fetch_board_data_ - data += magic_len; - len -= magic_len; - -- while (len > sizeof(struct ath10k_fw_ie)) { -- hdr = (struct ath10k_fw_ie *)data; -- ie_id = le32_to_cpu(hdr->id); -- ie_len = le32_to_cpu(hdr->len); -- -- len -= sizeof(*hdr); -- data = hdr->data; -- -- if (len < ALIGN(ie_len, 4)) { -- ath10k_err(ar, "invalid length for board ie_id %d ie_len %zu len %zu\n", -- ie_id, ie_len, len); -- ret = -EINVAL; -- goto err; -- } -- -- switch (ie_id) { -- case ATH10K_BD_IE_BOARD: -- ret = ath10k_core_parse_bd_ie_board(ar, data, ie_len, -- boardname); -- if (ret == -ENOENT && ar->id.bdf_ext[0] != '\0') { -- /* try default bdf if variant was not found */ -- char *s, *v = ",variant="; -- char boardname2[100]; -- -- strlcpy(boardname2, boardname, -- sizeof(boardname2)); -- -- s = strstr(boardname2, v); -- if (s) -- *s = '\0'; /* strip ",variant=%s" */ -- -- ret = ath10k_core_parse_bd_ie_board(ar, data, -- ie_len, -- boardname2); -- } -- -- if (ret == -ENOENT) -- /* no match found, continue */ -- break; -- else if (ret) -- /* there was an error, bail out */ -- goto err; -- -- /* board data found */ -- goto out; -- } -+ /* attempt to find boardname in the IE list */ -+ ret = ath10k_core_search_bd(ar, boardname, data, len); - -- /* jump over the padding */ -- ie_len = ALIGN(ie_len, 4); -- -- len -= ie_len; -- data += ie_len; -- } -+ /* if we didn't find it and have a fallback name, try that */ -+ if (ret == -ENOENT && fallback_boardname) -+ ret = ath10k_core_search_bd(ar, fallback_boardname, data, len); - - out: -- if (!ar->normal_mode_fw.board_data || !ar->normal_mode_fw.board_len) { -+ if (ret == -ENOENT) { - ath10k_err(ar, - "failed to fetch board data for %s from %s/%s\n", - boardname, ar->hw_params.fw.dir, filename); - ret = -ENODATA; -- goto err; - } - - /* Save firmware board name so we can display it later. */ - strlcpy(ar->normal_mode_fw.fw_file.fw_board_name, filename, - sizeof(ar->normal_mode_fw.fw_file.fw_board_name)); - -+ if (ret) -+ goto err; -+ - return 0; - - err: -@@ -1689,12 +1691,12 @@ err: - } - - static int ath10k_core_create_board_name(struct ath10k *ar, char *name, -- size_t name_len) -+ size_t name_len, bool with_variant) - { - /* strlen(',variant=') + strlen(ar->id.bdf_ext) */ - char variant[9 + ATH10K_SMBIOS_BDF_EXT_STR_LENGTH] = { 0 }; - -- if (ar->id.bdf_ext[0] != '\0') -+ if (with_variant && ar->id.bdf_ext[0] != '\0') - scnprintf(variant, sizeof(variant), ",variant=%s", - ar->id.bdf_ext); - -@@ -1720,21 +1722,31 @@ out: - - static int ath10k_core_fetch_board_file(struct ath10k *ar) - { -- char boardname[100]; -+ char boardname[100], fallback_boardname[100]; - int ret; - -- ret = ath10k_core_create_board_name(ar, boardname, sizeof(boardname)); -+ ret = ath10k_core_create_board_name(ar, boardname, -+ sizeof(boardname), true); - if (ret) { - ath10k_err(ar, "failed to create board name: %d", ret); - return ret; - } - -+ ret = ath10k_core_create_board_name(ar, fallback_boardname, -+ sizeof(boardname), false); -+ if (ret) { -+ ath10k_err(ar, "failed to create fallback board name: %d", ret); -+ return ret; -+ } -+ - ar->bd_api = 2; - if (ar->fwcfg.bname[0]) - ret = ath10k_core_fetch_board_data_api_n(ar, boardname, -+ fallback_boardname, - ar->fwcfg.bname); - else - ret = ath10k_core_fetch_board_data_api_n(ar, boardname, -+ fallback_boardname, - ATH10K_BOARD_API2_FILE); - if (!ret) - goto success; diff --git a/package/kernel/ath10k-ct/patches/200-ath10k-move-spectral-scan-support-under-a-separate-c.patch b/package/kernel/ath10k-ct/patches/200-ath10k-move-spectral-scan-support-under-a-separate-c.patch deleted file mode 100644 index bdc82f0067..0000000000 --- a/package/kernel/ath10k-ct/patches/200-ath10k-move-spectral-scan-support-under-a-separate-c.patch +++ /dev/null @@ -1,81 +0,0 @@ -From 42e01cb9cb109fb0bb4743f6c54d6aa67ac39b61 Mon Sep 17 00:00:00 2001 -Message-Id: <42e01cb9cb109fb0bb4743f6c54d6aa67ac39b61.1515610034.git.mschiffer@universe-factory.net> -In-Reply-To: <9df7ddc3ed25b7d3473f117a0680b9418adb5753.1515610034.git.mschiffer@universe-factory.net> -References: <9df7ddc3ed25b7d3473f117a0680b9418adb5753.1515610034.git.mschiffer@universe-factory.net> -From: Matthias Schiffer -Date: Mon, 27 Nov 2017 18:56:23 +0100 -Subject: [PATCH 2/2] ath10k: move spectral scan support under a separate - config symbol - -At the moment, spectral scan support, and with it RELAY, is always enabled -with ATH10K_DEBUGFS. Spectral scan support is currently the only user of -RELAY in ath10k, and it unconditionally reserves a relay channel. - -Having debugfs support in ath10k is often useful even on very small -embedded routers, where we'd rather like to avoid the code size and RAM -usage of the relay support. While ath10k-based devices usually have more -resources than ath9k-based ones, it makes sense to keep the configuration -symmetric to ath9k, so the same base kernel without RELAY can be used for -both ath9k and ath10k hardware. - -Signed-off-by: Matthias Schiffer -Signed-off-by: Kalle Valo ---- - ath10k-4.13/Kconfig | 9 ++++++++- - ath10k-4.13/Makefile | 2 +- - ath10k-4.13/spectral.h | 4 ++-- - 3 files changed, 11 insertions(+), 4 deletions(-) - ---- a/ath10k-4.13/Kconfig -+++ b/ath10k-4.13/Kconfig -@@ -40,12 +40,19 @@ config ATH10K_DEBUG - config ATH10K_DEBUGFS - bool "Atheros ath10k debugfs support" - depends on ATH10K && DEBUG_FS -- select RELAY - ---help--- - Enabled debugfs support - - If unsure, say Y to make it easier to debug problems. - -+config ATH10K_SPECTRAL -+ bool "Atheros ath10k spectral scan support" -+ depends on ATH10K_DEBUGFS -+ select RELAY -+ default n -+ ---help--- -+ Say Y to enable access to the FFT/spectral data via debugfs. -+ - config ATH10K_TRACING - bool "Atheros ath10k tracing support" - depends on ATH10K ---- a/ath10k-4.13/Makefile -+++ b/ath10k-4.13/Makefile -@@ -14,7 +14,7 @@ ath10k_core-y += mac.o \ - p2p.o \ - swap.o - --ath10k_core-$(CONFIG_ATH10K_DEBUGFS) += spectral.o -+ath10k_core-$(CONFIG_ATH10K_SPECTRAL) += spectral.o - ath10k_core-$(CONFIG_NL80211_TESTMODE) += testmode.o - ath10k_core-$(CONFIG_ATH10K_TRACING) += trace.o - ath10k_core-$(CONFIG_THERMAL) += thermal.o ---- a/ath10k-4.13/spectral.h -+++ b/ath10k-4.13/spectral.h -@@ -44,7 +44,7 @@ enum ath10k_spectral_mode { - SPECTRAL_MANUAL, - }; - --#ifdef CONFIG_ATH10K_DEBUGFS -+#ifdef CONFIG_ATH10K_SPECTRAL - - int ath10k_spectral_process_fft(struct ath10k *ar, - struct wmi_phyerr_ev_arg *phyerr, -@@ -85,6 +85,6 @@ static inline void ath10k_spectral_destr - { - } - --#endif /* CONFIG_ATH10K_DEBUGFS */ -+#endif /* CONFIG_ATH10K_SPECTRAL */ - - #endif /* SPECTRAL_H */ diff --git a/package/kernel/ath10k-ct/patches/201-ath10k-4.16_add-LED-and-GPIO-controlling-support-for-various-chipsets.patch b/package/kernel/ath10k-ct/patches/201-ath10k-4.16_add-LED-and-GPIO-controlling-support-for-various-chipsets.patch index 5207e195ff..74c4158f59 100644 --- a/package/kernel/ath10k-ct/patches/201-ath10k-4.16_add-LED-and-GPIO-controlling-support-for-various-chipsets.patch +++ b/package/kernel/ath10k-ct/patches/201-ath10k-4.16_add-LED-and-GPIO-controlling-support-for-various-chipsets.patch @@ -82,519 +82,6 @@ v13: 12 files changed, 314 insertions(+), 1 deletion(-) create mode 100644 ath10k-4.16/leds.c create mode 100644 ath10k-4.16/leds.h ---- a/ath10k-4.16/Kconfig -+++ b/ath10k-4.16/Kconfig -@@ -60,6 +60,16 @@ config ATH10K_SPECTRAL - ---help--- - Say Y to enable access to the FFT/spectral data via debugfs. - -+config ATH10K_LEDS -+ bool "Atheros ath10k LED support" -+ depends on ATH10K -+ select MAC80211_LEDS -+ select LEDS_CLASS -+ select NEW_LEDS -+ default y -+ ---help--- -+ This option is necessary, if you want LED support for chipset connected led pins. If unsure, say N. -+ - config ATH10K_TRACING - bool "Atheros ath10k tracing support" - depends on ATH10K ---- a/ath10k-4.16/Makefile -+++ b/ath10k-4.16/Makefile -@@ -19,6 +19,7 @@ ath10k_core-$(CONFIG_ATH10K_SPECTRAL) += - ath10k_core-$(CONFIG_NL80211_TESTMODE) += testmode.o - ath10k_core-$(CONFIG_ATH10K_TRACING) += trace.o - ath10k_core-$(CONFIG_THERMAL) += thermal.o -+ath10k_core-$(CONFIG_ATH10K_LEDS) += leds.o - ath10k_core-$(CONFIG_MAC80211_DEBUGFS) += debugfs_sta.o - ath10k_core-$(CONFIG_PM) += wow.o - ath10k_core-$(CONFIG_DEV_COREDUMP) += coredump.o ---- a/ath10k-4.16/core.c -+++ b/ath10k-4.16/core.c -@@ -34,6 +34,7 @@ - #include "testmode.h" - #include "wmi-ops.h" - #include "coredump.h" -+#include "leds.h" - - /* Disable ath10k-ct DBGLOG output by default */ - unsigned int ath10k_debug_mask = ATH10K_DBG_NO_DBGLOG; -@@ -73,6 +74,7 @@ static const struct ath10k_hw_params ath - .id = QCA988X_HW_2_0_VERSION, - .dev_id = QCA988X_2_0_DEVICE_ID, - .name = "qca988x hw2.0", -+ .led_pin = 1, - .patch_load_addr = QCA988X_HW_2_0_PATCH_LOAD_ADDR, - .uart_pin = 7, - .cc_wraparound_type = ATH10K_HW_CC_WRAP_SHIFTED_ALL, -@@ -131,6 +133,7 @@ static const struct ath10k_hw_params ath - .id = QCA9887_HW_1_0_VERSION, - .dev_id = QCA9887_1_0_DEVICE_ID, - .name = "qca9887 hw1.0", -+ .led_pin = 1, - .patch_load_addr = QCA9887_HW_1_0_PATCH_LOAD_ADDR, - .uart_pin = 7, - .cc_wraparound_type = ATH10K_HW_CC_WRAP_SHIFTED_ALL, -@@ -275,6 +278,7 @@ static const struct ath10k_hw_params ath - .id = QCA99X0_HW_2_0_DEV_VERSION, - .dev_id = QCA99X0_2_0_DEVICE_ID, - .name = "qca99x0 hw2.0", -+ .led_pin = 17, - .patch_load_addr = QCA99X0_HW_2_0_PATCH_LOAD_ADDR, - .uart_pin = 7, - .otp_exe_param = 0x00000700, -@@ -309,6 +313,7 @@ static const struct ath10k_hw_params ath - .id = QCA9984_HW_1_0_DEV_VERSION, - .dev_id = QCA9984_1_0_DEVICE_ID, - .name = "qca9984/qca9994 hw1.0", -+ .led_pin = 17, - .patch_load_addr = QCA9984_HW_1_0_PATCH_LOAD_ADDR, - .uart_pin = 7, - .cc_wraparound_type = ATH10K_HW_CC_WRAP_SHIFTED_EACH, -@@ -348,6 +353,7 @@ static const struct ath10k_hw_params ath - .id = QCA9888_HW_2_0_DEV_VERSION, - .dev_id = QCA9888_2_0_DEVICE_ID, - .name = "qca9888 hw2.0", -+ .led_pin = 17, - .patch_load_addr = QCA9888_HW_2_0_PATCH_LOAD_ADDR, - .uart_pin = 7, - .cc_wraparound_type = ATH10K_HW_CC_WRAP_SHIFTED_EACH, -@@ -3104,6 +3110,10 @@ int ath10k_core_start(struct ath10k *ar, - ath10k_wmi_check_apply_board_power_ctl_table(ar); - } - -+ status = ath10k_leds_start(ar); -+ if (status) -+ goto err_hif_stop; -+ - return 0; - - err_hif_stop: -@@ -3350,9 +3360,18 @@ static void ath10k_core_register_work(st - goto err_spectral_destroy; - } - -+ status = ath10k_leds_register(ar); -+ if (status) { -+ ath10k_err(ar, "could not register leds: %d\n", -+ status); -+ goto err_thermal_unregister; -+ } -+ - set_bit(ATH10K_FLAG_CORE_REGISTERED, &ar->dev_flags); - return; - -+err_thermal_unregister: -+ ath10k_thermal_unregister(ar); - err_spectral_destroy: - ath10k_spectral_destroy(ar); - err_debug_destroy: -@@ -3410,6 +3429,8 @@ void ath10k_core_unregister(struct ath10 - if (!test_bit(ATH10K_FLAG_CORE_REGISTERED, &ar->dev_flags)) - return; - -+ ath10k_leds_unregister(ar); -+ - ath10k_thermal_unregister(ar); - /* Stop spectral before unregistering from mac80211 to remove the - * relayfs debugfs file cleanly. Otherwise the parent debugfs tree ---- a/ath10k-4.16/core.h -+++ b/ath10k-4.16/core.h -@@ -24,6 +24,7 @@ - #include - #include - #include -+#include - - #include "htt.h" - #include "htc.h" -@@ -1278,6 +1279,13 @@ struct ath10k { - } testmode; - - struct { -+ struct gpio_led wifi_led; -+ struct led_classdev cdev; -+ char label[48]; -+ u32 gpio_state_pin; -+ } leds; -+ -+ struct { - /* protected by data_lock */ - u32 fw_crash_counter; - u32 fw_warm_reset_counter; ---- a/ath10k-4.16/hw.h -+++ b/ath10k-4.16/hw.h -@@ -499,6 +499,7 @@ struct ath10k_hw_params { - const char *name; - u32 patch_load_addr; - int uart_pin; -+ int led_pin; - u32 otp_exe_param; - - /* Type of hw cycle counter wraparound logic, for more info ---- /dev/null -+++ b/ath10k-4.16/leds.c -@@ -0,0 +1,103 @@ -+/* -+ * Copyright (c) 2005-2011 Atheros Communications Inc. -+ * Copyright (c) 2011-2017 Qualcomm Atheros, Inc. -+ * Copyright (c) 2018 Sebastian Gottschall -+ * Copyright (c) 2018, The Linux Foundation. All rights reserved. -+ * -+ * Permission to use, copy, modify, and/or distribute this software for any -+ * purpose with or without fee is hereby granted, provided that the above -+ * copyright notice and this permission notice appear in all copies. -+ * -+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES -+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF -+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR -+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES -+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN -+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF -+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. -+ */ -+ -+#include -+ -+#include "core.h" -+#include "wmi.h" -+#include "wmi-ops.h" -+ -+#include "leds.h" -+ -+static int ath10k_leds_set_brightness_blocking(struct led_classdev *led_cdev, -+ enum led_brightness brightness) -+{ -+ struct ath10k *ar = container_of(led_cdev, struct ath10k, -+ leds.cdev); -+ struct gpio_led *led = &ar->leds.wifi_led; -+ -+ mutex_lock(&ar->conf_mutex); -+ -+ if (ar->state != ATH10K_STATE_ON) -+ goto out; -+ -+ ar->leds.gpio_state_pin = (brightness != LED_OFF) ^ led->active_low; -+ ath10k_wmi_gpio_output(ar, led->gpio, ar->leds.gpio_state_pin); -+ -+out: -+ mutex_unlock(&ar->conf_mutex); -+ -+ return 0; -+} -+ -+int ath10k_leds_start(struct ath10k *ar) -+{ -+ if (ar->hw_params.led_pin == 0) -+ /* leds not supported */ -+ return 0; -+ -+ /* under some circumstances, the gpio pin gets reconfigured -+ * to default state by the firmware, so we need to -+ * reconfigure it this behaviour has only ben seen on -+ * QCA9984 and QCA99XX devices so far -+ */ -+ ath10k_wmi_gpio_config(ar, ar->hw_params.led_pin, 0, -+ WMI_GPIO_PULL_NONE, WMI_GPIO_INTTYPE_DISABLE); -+ ath10k_wmi_gpio_output(ar, ar->hw_params.led_pin, 1); -+ -+ return 0; -+} -+ -+int ath10k_leds_register(struct ath10k *ar) -+{ -+ int ret; -+ -+ if (ar->hw_params.led_pin == 0) -+ /* leds not supported */ -+ return 0; -+ -+ snprintf(ar->leds.label, sizeof(ar->leds.label), "ath10k-%s", -+ wiphy_name(ar->hw->wiphy)); -+ ar->leds.wifi_led.active_low = 1; -+ ar->leds.wifi_led.gpio = ar->hw_params.led_pin; -+ ar->leds.wifi_led.name = ar->leds.label; -+ ar->leds.wifi_led.default_state = LEDS_GPIO_DEFSTATE_KEEP; -+ -+ ar->leds.cdev.name = ar->leds.label; -+ ar->leds.cdev.brightness_set_blocking = ath10k_leds_set_brightness_blocking; -+ -+ /* FIXME: this assignment doesn't make sense as it's NULL, remove it? */ -+ ar->leds.cdev.default_trigger = ar->leds.wifi_led.default_trigger; -+ -+ ret = led_classdev_register(wiphy_dev(ar->hw->wiphy), &ar->leds.cdev); -+ if (ret) -+ return ret; -+ -+ return 0; -+} -+ -+void ath10k_leds_unregister(struct ath10k *ar) -+{ -+ if (ar->hw_params.led_pin == 0) -+ /* leds not supported */ -+ return; -+ -+ led_classdev_unregister(&ar->leds.cdev); -+} -+ ---- /dev/null -+++ b/ath10k-4.16/leds.h -@@ -0,0 +1,41 @@ -+/* -+ * Copyright (c) 2018, The Linux Foundation. All rights reserved. -+ * -+ * Permission to use, copy, modify, and/or distribute this software for any -+ * purpose with or without fee is hereby granted, provided that the above -+ * copyright notice and this permission notice appear in all copies. -+ * -+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES -+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF -+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR -+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES -+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN -+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF -+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. -+ */ -+#ifndef _LEDS_H_ -+#define _LEDS_H_ -+ -+#include "core.h" -+ -+#ifdef CONFIG_ATH10K_LEDS -+void ath10k_leds_unregister(struct ath10k *ar); -+int ath10k_leds_start(struct ath10k *ar); -+int ath10k_leds_register(struct ath10k *ar); -+#else -+static inline void ath10k_leds_unregister(struct ath10k *ar) -+{ -+} -+ -+static inline int ath10k_leds_start(struct ath10k *ar) -+{ -+ return 0; -+} -+ -+static inline int ath10k_leds_register(struct ath10k *ar) -+{ -+ return 0; -+} -+ -+#endif -+#endif /* _LEDS_H_ */ ---- a/ath10k-4.16/mac.c -+++ b/ath10k-4.16/mac.c -@@ -33,6 +33,7 @@ - #include "wmi-tlv.h" - #include "wmi-ops.h" - #include "wow.h" -+#include "leds.h" - - /*********/ - /* Rates */ ---- a/ath10k-4.16/wmi-ops.h -+++ b/ath10k-4.16/wmi-ops.h -@@ -199,6 +199,9 @@ struct wmi_ops { - (struct ath10k *ar, - enum wmi_bss_survey_req_type type); - struct sk_buff *(*gen_echo)(struct ath10k *ar, u32 value); -+ struct sk_buff *(*gen_gpio_config)(struct ath10k *ar, u32 gpio_num, -+ u32 input, u32 pull_type, u32 intr_mode); -+ struct sk_buff *(*gen_gpio_output)(struct ath10k *ar, u32 gpio_num, u32 set); - }; - - int ath10k_wmi_cmd_send(struct ath10k *ar, struct sk_buff *skb, u32 cmd_id); -@@ -983,6 +986,35 @@ ath10k_wmi_force_fw_hang(struct ath10k * - return ath10k_wmi_cmd_send(ar, skb, ar->wmi.cmd->force_fw_hang_cmdid); - } - -+static inline int ath10k_wmi_gpio_config(struct ath10k *ar, u32 gpio_num, -+ u32 input, u32 pull_type, u32 intr_mode) -+{ -+ struct sk_buff *skb; -+ -+ if (!ar->wmi.ops->gen_gpio_config) -+ return -EOPNOTSUPP; -+ -+ skb = ar->wmi.ops->gen_gpio_config(ar, gpio_num, input, pull_type, intr_mode); -+ if (IS_ERR(skb)) -+ return PTR_ERR(skb); -+ -+ return ath10k_wmi_cmd_send(ar, skb, ar->wmi.cmd->gpio_config_cmdid); -+} -+ -+static inline int ath10k_wmi_gpio_output(struct ath10k *ar, u32 gpio_num, u32 set) -+{ -+ struct sk_buff *skb; -+ -+ if (!ar->wmi.ops->gen_gpio_config) -+ return -EOPNOTSUPP; -+ -+ skb = ar->wmi.ops->gen_gpio_output(ar, gpio_num, set); -+ if (IS_ERR(skb)) -+ return PTR_ERR(skb); -+ -+ return ath10k_wmi_cmd_send(ar, skb, ar->wmi.cmd->gpio_output_cmdid); -+} -+ - static inline int - ath10k_wmi_dbglog_cfg(struct ath10k *ar, u64 module_enable, u32 log_level) - { ---- a/ath10k-4.16/wmi-tlv.c -+++ b/ath10k-4.16/wmi-tlv.c -@@ -3729,6 +3729,8 @@ static const struct wmi_ops wmi_tlv_ops - .gen_echo = ath10k_wmi_tlv_op_gen_echo, - .gen_vdev_spectral_conf = ath10k_wmi_tlv_op_gen_vdev_spectral_conf, - .gen_vdev_spectral_enable = ath10k_wmi_tlv_op_gen_vdev_spectral_enable, -+ /* .gen_gpio_config not implemented */ -+ /* .gen_gpio_output not implemented */ - }; - - static const struct wmi_peer_flags_map wmi_tlv_peer_flags_map = { ---- a/ath10k-4.16/wmi.c -+++ b/ath10k-4.16/wmi.c -@@ -7593,6 +7593,49 @@ ath10k_wmi_op_gen_peer_set_param(struct - return skb; - } - -+static struct sk_buff *ath10k_wmi_op_gen_gpio_config(struct ath10k *ar, -+ u32 gpio_num, u32 input, -+ u32 pull_type, u32 intr_mode) -+{ -+ struct wmi_gpio_config_cmd *cmd; -+ struct sk_buff *skb; -+ -+ skb = ath10k_wmi_alloc_skb(ar, sizeof(*cmd)); -+ if (!skb) -+ return ERR_PTR(-ENOMEM); -+ -+ cmd = (struct wmi_gpio_config_cmd *)skb->data; -+ cmd->pull_type = __cpu_to_le32(pull_type); -+ cmd->gpio_num = __cpu_to_le32(gpio_num); -+ cmd->input = __cpu_to_le32(input); -+ cmd->intr_mode = __cpu_to_le32(intr_mode); -+ -+ ath10k_dbg(ar, ATH10K_DBG_WMI, "wmi gpio_config gpio_num 0x%08x input 0x%08x pull_type 0x%08x intr_mode 0x%08x\n", -+ gpio_num, input, pull_type, intr_mode); -+ -+ return skb; -+} -+ -+static struct sk_buff *ath10k_wmi_op_gen_gpio_output(struct ath10k *ar, -+ u32 gpio_num, u32 set) -+{ -+ struct wmi_gpio_output_cmd *cmd; -+ struct sk_buff *skb; -+ -+ skb = ath10k_wmi_alloc_skb(ar, sizeof(*cmd)); -+ if (!skb) -+ return ERR_PTR(-ENOMEM); -+ -+ cmd = (struct wmi_gpio_output_cmd *)skb->data; -+ cmd->gpio_num = __cpu_to_le32(gpio_num); -+ cmd->set = __cpu_to_le32(set); -+ -+ ath10k_dbg(ar, ATH10K_DBG_WMI, "wmi gpio_output gpio_num 0x%08x set 0x%08x\n", -+ gpio_num, set); -+ -+ return skb; -+} -+ - static struct sk_buff * - ath10k_wmi_op_gen_set_psmode(struct ath10k *ar, u32 vdev_id, - enum wmi_sta_ps_mode psmode) -@@ -9235,6 +9278,9 @@ static const struct wmi_ops wmi_ops = { - .fw_stats_fill = ath10k_wmi_main_op_fw_stats_fill, - .get_vdev_subtype = ath10k_wmi_op_get_vdev_subtype, - .gen_echo = ath10k_wmi_op_gen_echo, -+ .gen_gpio_config = ath10k_wmi_op_gen_gpio_config, -+ .gen_gpio_output = ath10k_wmi_op_gen_gpio_output, -+ - /* .gen_bcn_tmpl not implemented */ - /* .gen_prb_tmpl not implemented */ - /* .gen_p2p_go_bcn_ie not implemented */ -@@ -9305,6 +9351,8 @@ static const struct wmi_ops wmi_10_1_ops - .fw_stats_fill = ath10k_wmi_10x_op_fw_stats_fill, - .get_vdev_subtype = ath10k_wmi_op_get_vdev_subtype, - .gen_echo = ath10k_wmi_op_gen_echo, -+ .gen_gpio_config = ath10k_wmi_op_gen_gpio_config, -+ .gen_gpio_output = ath10k_wmi_op_gen_gpio_output, - /* .gen_bcn_tmpl not implemented */ - /* .gen_prb_tmpl not implemented */ - /* .gen_p2p_go_bcn_ie not implemented */ -@@ -9383,6 +9431,8 @@ static const struct wmi_ops wmi_10_2_ops - .gen_delba_send = ath10k_wmi_op_gen_delba_send, - .fw_stats_fill = ath10k_wmi_10x_op_fw_stats_fill, - .get_vdev_subtype = ath10k_wmi_op_get_vdev_subtype, -+ .gen_gpio_config = ath10k_wmi_op_gen_gpio_config, -+ .gen_gpio_output = ath10k_wmi_op_gen_gpio_output, - /* .gen_pdev_enable_adaptive_cca not implemented */ - }; - -@@ -9453,6 +9503,8 @@ static const struct wmi_ops wmi_10_2_4_o - .gen_pdev_enable_adaptive_cca = - ath10k_wmi_op_gen_pdev_enable_adaptive_cca, - .get_vdev_subtype = ath10k_wmi_10_2_4_op_get_vdev_subtype, -+ .gen_gpio_config = ath10k_wmi_op_gen_gpio_config, -+ .gen_gpio_output = ath10k_wmi_op_gen_gpio_output, - /* .gen_bcn_tmpl not implemented */ - /* .gen_prb_tmpl not implemented */ - /* .gen_p2p_go_bcn_ie not implemented */ -@@ -9529,6 +9581,8 @@ static const struct wmi_ops wmi_10_4_ops - .gen_pdev_bss_chan_info_req = ath10k_wmi_10_2_op_gen_pdev_bss_chan_info, - .gen_echo = ath10k_wmi_op_gen_echo, - .gen_pdev_get_tpc_config = ath10k_wmi_10_2_4_op_gen_pdev_get_tpc_config, -+ .gen_gpio_config = ath10k_wmi_op_gen_gpio_config, -+ .gen_gpio_output = ath10k_wmi_op_gen_gpio_output, - }; - - int ath10k_wmi_attach(struct ath10k *ar) ---- a/ath10k-4.16/wmi.h -+++ b/ath10k-4.16/wmi.h -@@ -3016,6 +3016,41 @@ enum wmi_10_4_feature_mask { - - }; - -+/* WMI_GPIO_CONFIG_CMDID */ -+enum { -+ WMI_GPIO_PULL_NONE, -+ WMI_GPIO_PULL_UP, -+ WMI_GPIO_PULL_DOWN, -+}; -+ -+enum { -+ WMI_GPIO_INTTYPE_DISABLE, -+ WMI_GPIO_INTTYPE_RISING_EDGE, -+ WMI_GPIO_INTTYPE_FALLING_EDGE, -+ WMI_GPIO_INTTYPE_BOTH_EDGE, -+ WMI_GPIO_INTTYPE_LEVEL_LOW, -+ WMI_GPIO_INTTYPE_LEVEL_HIGH -+}; -+ -+/* WMI_GPIO_CONFIG_CMDID */ -+struct wmi_gpio_config_cmd { -+ __le32 gpio_num; /* GPIO number to be setup */ -+ __le32 input; /* 0 - Output/ 1 - Input */ -+ __le32 pull_type; /* Pull type defined above */ -+ __le32 intr_mode; /* Interrupt mode defined above (Input) */ -+} __packed; -+ -+/* WMI_GPIO_OUTPUT_CMDID */ -+struct wmi_gpio_output_cmd { -+ __le32 gpio_num; /* GPIO number to be setup */ -+ __le32 set; /* Set the GPIO pin*/ -+} __packed; -+ -+/* WMI_GPIO_INPUT_EVENTID */ -+struct wmi_gpio_input_event { -+ __le32 gpio_num; /* GPIO number which changed state */ -+} __packed; -+ - struct wmi_ext_resource_config_10_4_cmd { - /* contains enum wmi_host_platform_type */ - __le32 host_platform_config; --- a/ath10k-4.19/Kconfig +++ b/ath10k-4.19/Kconfig @@ -64,6 +64,16 @@ config ATH10K_DEBUGFS diff --git a/package/kernel/ath10k-ct/patches/202-ath10k-4.16-use-tpt-trigger-by-default.patch b/package/kernel/ath10k-ct/patches/202-ath10k-4.16-use-tpt-trigger-by-default.patch index baecb841ec..9fe4c3b860 100644 --- a/package/kernel/ath10k-ct/patches/202-ath10k-4.16-use-tpt-trigger-by-default.patch +++ b/package/kernel/ath10k-ct/patches/202-ath10k-4.16-use-tpt-trigger-by-default.patch @@ -14,43 +14,6 @@ Signed-off-by: Mathias Kresin ath10k-4.16/mac.c | 2 +- 3 files changed, 6 insertions(+), 4 deletions(-) ---- a/ath10k-4.16/core.h -+++ b/ath10k-4.16/core.h -@@ -1371,6 +1371,10 @@ struct ath10k { - u8 csi_data[4096]; - u16 csi_data_len; - -+#ifdef CPTCFG_MAC80211_LEDS -+ const char *led_default_trigger; -+#endif -+ - /* must be last */ - u8 drv_priv[0] __aligned(sizeof(void *)); - }; ---- a/ath10k-4.16/leds.c -+++ b/ath10k-4.16/leds.c -@@ -81,9 +81,7 @@ int ath10k_leds_register(struct ath10k * - - ar->leds.cdev.name = ar->leds.label; - ar->leds.cdev.brightness_set_blocking = ath10k_leds_set_brightness_blocking; -- -- /* FIXME: this assignment doesn't make sense as it's NULL, remove it? */ -- ar->leds.cdev.default_trigger = ar->leds.wifi_led.default_trigger; -+ ar->leds.cdev.default_trigger = ar->led_default_trigger; - - ret = led_classdev_register(wiphy_dev(ar->hw->wiphy), &ar->leds.cdev); - if (ret) ---- a/ath10k-4.16/mac.c -+++ b/ath10k-4.16/mac.c -@@ -9794,7 +9794,7 @@ int ath10k_mac_register(struct ath10k *a - wiphy_ext_feature_set(ar->hw->wiphy, NL80211_EXT_FEATURE_CQM_RSSI_LIST); - - #ifdef CPTCFG_MAC80211_LEDS -- ieee80211_create_tpt_led_trigger(ar->hw, -+ ar->led_default_trigger = ieee80211_create_tpt_led_trigger(ar->hw, - IEEE80211_TPT_LEDTRIG_FL_RADIO, ath10k_tpt_blink, - ARRAY_SIZE(ath10k_tpt_blink)); - #endif --- a/ath10k-4.19/core.h +++ b/ath10k-4.19/core.h @@ -1487,6 +1487,10 @@ struct ath10k {