From: Mauro Carvalho Chehab Date: Fri, 18 Apr 2008 00:40:45 +0000 (-0300) Subject: V4L/DVB (7604): em28xx-dvb: Fix analog mode X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=102a0b0879a01a413ed5f667f7db9c2085ca8474;p=openwrt%2Fstaging%2Fblogic.git V4L/DVB (7604): em28xx-dvb: Fix analog mode The analog entries are wrong. Fix it. Signed-off-by: Mauro Carvalho Chehab --- diff --git a/drivers/media/video/em28xx/em28xx-cards.c b/drivers/media/video/em28xx/em28xx-cards.c index 2a44d2adeb09..0859a84e7433 100644 --- a/drivers/media/video/em28xx/em28xx-cards.c +++ b/drivers/media/video/em28xx/em28xx-cards.c @@ -171,26 +171,6 @@ struct em28xx_board em28xx_boards[] = { .vmux = TVP5150_SVIDEO, .amux = 1, } }, - .analog_gpio = { - { /* xc3028 reset seq */ - .reg = 0x08, - .val = 0x2d, - .rst = 0x3d, - .t1 = 5, - .t2 = 10, - .t3 = 5, - }, - }, - .digital_gpio = { - { /* xc3028 reset seq */ - .reg = 0x08, - .val = 0x2e, - .rst = 0x3e, - .t1 = 6, - .t2 = 6, - .t3 = 6, - } - }, }, [EM2880_BOARD_HAUPPAUGE_WINTV_HVR_950] = { .name = "Hauppauge WinTV HVR 950", @@ -214,32 +194,6 @@ struct em28xx_board em28xx_boards[] = { .vmux = TVP5150_SVIDEO, .amux = 1, } }, - .analog_gpio = { - { /* xc3028 reset seq */ - .reg = 0x08, - .val = 0x2d, - .rst = 0x3d, - .t1 = 5, - .t2 = 10, - .t3 = 5, - }, - }, - .digital_gpio = { - { /* xc3028 reset seq */ - .reg = 0x08, - .val = 0x2e, - .rst = 0x3e, - .t1 = 6, - .t2 = 6, - .t3 = 6, - }, { /* demod reset seq */ - .reg = 0x04, - .val = 0x04, - .rst = 0x0c, - .t2 = 10, - .t3 = 10, - } - }, }, [EM2880_BOARD_TERRATEC_HYBRID_XS] = { .name = "Terratec Hybrid XS", @@ -476,7 +430,28 @@ struct usb_device_id em28xx_id_table [] = { }; MODULE_DEVICE_TABLE(usb, em28xx_id_table); -/* EEPROM hash table for devices with generic USB IDs */ +/* + * Reset sequences for analog/digital modes + */ + +/* Board Hauppauge WinTV HVR 900 analog */ +struct em28xx_reg_seq hauppauge_wintv_hvr_900_analog[] = { + { -1, -1, 6}, + {0x08, 0x2d, 10}, + {0x08, 0x3d, 5}, + { -1, -1, -1}, +}; +/* Board Hauppauge WinTV HVR 900 digital */ +struct em28xx_reg_seq hauppauge_wintv_hvr_900_digital[] = { + { -1, -1, 6}, + {0x08, 0x2e, 6}, + {0x08, 0x3e, 6}, + { -1, -1, -1}, +}; + +/* + * EEPROM hash table for devices with generic USB IDs + */ static struct em28xx_hash_table em28xx_eeprom_hash [] = { /* P/N: SA 60002070465 Tuner: TVF7533-MF */ {0x6ce05a8f, EM2820_BOARD_PROLINK_PLAYTV_USB2, TUNER_YMEC_TVF_5533MF}, @@ -490,9 +465,9 @@ static struct em28xx_hash_table em28xx_i2c_hash[] = { int em28xx_tuner_callback(void *ptr, int command, int arg) { - int rc = 0, i; + int rc = 0; struct em28xx *dev = ptr; - struct gpio_ctl *gpio_ctl; + struct em28xx_reg_seq *gpio; if (dev->tuner_type != TUNER_XC2028) return 0; @@ -501,44 +476,31 @@ int em28xx_tuner_callback(void *ptr, int command, int arg) return 0; if (dev->mode == EM28XX_ANALOG_MODE) - gpio_ctl = dev->analog_gpio; + gpio = dev->analog_gpio; else - gpio_ctl = dev->digital_gpio; + gpio = dev->digital_gpio; /* djh - Not sure if these are still required */ - if (dev->mode == EM28XX_ANALOG_MODE) { - dev->em28xx_write_regs_req(dev, 0x00, 0x48, "\x00", 1); - dev->em28xx_write_regs_req(dev, 0x00, 0x12, "\x67", 1); - msleep(6); - } else { - dev->em28xx_write_regs_req(dev, 0x00, 0x48, "\x00", 1); - dev->em28xx_write_regs_req(dev, 0x00, 0x12, "\x37", 1); - msleep(6); - } - - /* Send GPIO reset sequences specified at board entry */ - for (i = 0; i < MAX_GPIO; i++) { - if (!gpio_ctl->val) - break; - - dev->em28xx_write_regs(dev, - gpio_ctl->reg, - &gpio_ctl->val, 1); - if (gpio_ctl->t1) - msleep(gpio_ctl->t1); - - if (!gpio_ctl->rst) { - gpio_ctl++; - continue; - } + dev->em28xx_write_regs_req(dev, 0x00, 0x48, "\x00", 1); + if (dev->mode == EM28XX_ANALOG_MODE) + dev->em28xx_write_regs_req(dev, 0x00, 0x12, "\x67", 1); + else + dev->em28xx_write_regs_req(dev, 0x00, 0x12, "\x37", 1); + msleep(6); - dev->em28xx_write_regs(dev, - gpio_ctl->reg, - &gpio_ctl->rst, 1); - if (gpio_ctl->t2) - msleep(gpio_ctl->t2); + if (!gpio) + return rc; - gpio_ctl++; + /* Send GPIO reset sequences specified at board entry */ + while (gpio->sleep >= 0) { + if (gpio->reg >= 0) + rc = dev->em28xx_write_regs(dev, + gpio->reg, + &gpio->val, 1); + if (gpio->sleep > 0) + msleep(gpio->sleep); + + gpio++; } return rc; } @@ -554,8 +516,6 @@ static void em28xx_set_model(struct em28xx *dev) dev->has_12mhz_i2s = em28xx_boards[dev->model].has_12mhz_i2s; dev->max_range_640_480 = em28xx_boards[dev->model].max_range_640_480; dev->has_dvb = em28xx_boards[dev->model].has_dvb; - dev->analog_gpio = em28xx_boards[dev->model].analog_gpio; - dev->digital_gpio = em28xx_boards[dev->model].digital_gpio; } /* Since em28xx_pre_card_setup() requires a proper dev->model, @@ -573,13 +533,22 @@ void em28xx_pre_card_setup(struct em28xx *dev) case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_950: em28xx_write_regs(dev, XCLK_REG, "\x27", 1); em28xx_write_regs(dev, I2C_CLK_REG, "\x40", 1); - } + em28xx_write_regs(dev, 0x08, "\xff", 1); + em28xx_write_regs(dev, 0x04, "\x00", 1); + msleep(100); + em28xx_write_regs(dev, 0x04, "\x08", 1); + msleep(100); + em28xx_write_regs(dev, 0x08, "\xff", 1); + msleep(50); + em28xx_write_regs(dev, 0x08, "\x2d", 1); + msleep(50); + em28xx_write_regs(dev, 0x08, "\x3d", 1); + + dev->analog_gpio = hauppauge_wintv_hvr_900_analog; + dev->digital_gpio = hauppauge_wintv_hvr_900_digital; - /* Put xc2028 tuners and demods into a sane state */ - if (dev->tuner_type == TUNER_XC2028) { - dev->mode = EM28XX_ANALOG_MODE; - em28xx_tuner_callback(dev, XC2028_TUNER_RESET, 0); - }; + break; + } } void em28xx_setup_xc3028(struct em28xx *dev, struct xc2028_ctrl *ctl) diff --git a/drivers/media/video/em28xx/em28xx-core.c b/drivers/media/video/em28xx/em28xx-core.c index cb9f721ca280..77f64900717d 100644 --- a/drivers/media/video/em28xx/em28xx-core.c +++ b/drivers/media/video/em28xx/em28xx-core.c @@ -331,22 +331,17 @@ int em28xx_capture_start(struct em28xx *dev, int start) if (!start) { /* disable video capture */ rc = em28xx_write_regs(dev, VINENABLE_REG, "\x27", 1); - if (rc < 0) - return rc; + return rc; } /* enable video capture */ rc = em28xx_write_regs_req(dev, 0x00, 0x48, "\x00", 1); - if (rc < 0) - return rc; + if (dev->mode == EM28XX_ANALOG_MODE) rc = em28xx_write_regs(dev, VINENABLE_REG,"\x67", 1); else rc = em28xx_write_regs(dev, VINENABLE_REG,"\x37", 1); - if (rc < 0) - return rc; - msleep (6); return rc; diff --git a/drivers/media/video/em28xx/em28xx-dvb.c b/drivers/media/video/em28xx/em28xx-dvb.c index fd8f44cb6cbc..64816ae106e3 100644 --- a/drivers/media/video/em28xx/em28xx-dvb.c +++ b/drivers/media/video/em28xx/em28xx-dvb.c @@ -414,6 +414,7 @@ static int dvb_init(struct em28xx *dev) goto out_free; } + printk(KERN_INFO "Successfully loaded em28xx-dvb\n"); return 0; out_free: diff --git a/drivers/media/video/em28xx/em28xx.h b/drivers/media/video/em28xx/em28xx.h index e5fd2dc77355..91dce95cd19c 100644 --- a/drivers/media/video/em28xx/em28xx.h +++ b/drivers/media/video/em28xx/em28xx.h @@ -225,19 +225,10 @@ enum em28xx_decoder { EM28XX_SAA7114 }; -#define MAX_GPIO 2 -struct gpio_ctl { - /* Register to be set */ - unsigned char reg; - /* Initial/final value */ +struct em28xx_reg_seq { + int reg; unsigned char val; - /* reset value - if set, it will do: - val1 - val2 - val1 - */ - unsigned char rst; - /* Sleep times - */ - unsigned int t1, t2, t3; + int sleep; }; struct em28xx_board { @@ -255,9 +246,6 @@ struct em28xx_board { unsigned int max_range_640_480:1; unsigned int has_dvb:1; - struct gpio_ctl analog_gpio[MAX_GPIO]; - struct gpio_ctl digital_gpio[MAX_GPIO]; - enum em28xx_decoder decoder; struct em28xx_input input[MAX_EM28XX_INPUT]; @@ -343,8 +331,8 @@ struct em28xx { unsigned int max_range_640_480:1; unsigned int has_dvb:1; - struct gpio_ctl *analog_gpio; - struct gpio_ctl *digital_gpio; + /* GPIO sequences for tuner callback */ + struct em28xx_reg_seq *analog_gpio, *digital_gpio; int video_inputs; /* number of video inputs */ struct list_head devlist;