From: Christian Lamparter Date: Thu, 7 Mar 2024 21:43:41 +0000 (+0100) Subject: mpc85xx: p1020: convert Aerohive AP330/AP350 to simpleImage X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=102009f3ea48a49114485fb119072850f40ae1e8;p=openwrt%2Fstaging%2Fpepe2k.git mpc85xx: p1020: convert Aerohive AP330/AP350 to simpleImage with 6.1, the kernel no longer fitted into the 16 MiB and kicking down the can and increasing KERNEL_SIZE to 20 MiB didn't help as the device failed to boot. Using 'kernel-bin | gzip | uimage gzip' didn't work since the uboot does not have enough heap to decompress these big kernels. And finally playing around with uboot was more a hassle than converting this device to take the simpleImage-boot-route in the future. Note: The device now takes even longer on the first boot-up after the flash due to JFFS2 initializing all the remaining flash. Be prepared to wait up to 10 minutes before the green status LED stops blinking and will shine a solid green! (On the plus site: the device now has ~10 MiB of additional space for rootfs+rootfs_data). Note2: This patch includes a kernel patch refresh. Signed-off-by: Christian Lamparter --- diff --git a/target/linux/mpc85xx/files/arch/powerpc/boot/dts/hiveap-330.dts b/target/linux/mpc85xx/files/arch/powerpc/boot/dts/hiveap-330.dts index 6ad5c4ccd6..7ba282766e 100644 --- a/target/linux/mpc85xx/files/arch/powerpc/boot/dts/hiveap-330.dts +++ b/target/linux/mpc85xx/files/arch/powerpc/boot/dts/hiveap-330.dts @@ -27,11 +27,105 @@ spi0 = &spi0; }; + chosen { + /* + * not yet implemented. + * stdout-path = &serial0 ":9600n8"; + * + * + * this should work... but it doesn't because CONFIG_CMDLINE in our + * OpenWrt's target config sets "console=ttyS0,115200" + * stdout-path = "/soc@ffe00000/serial@4500:9600n8"; + */ + + bootargs = "console=ttyS0,9600n8"; + }; + + cpus { + PowerPC,P1020@0 { + i-cache-sets = <0x80>; + i-cache-size = <0x8000>; + i-cache-block-size = <0x20>; + d-cache-sets = <0x80>; + d-cache-size = <0x8000>; + d-cache-block-size = <0x20>; + status = "okay"; + clock-frequency = <533333328>; /* 533.33 MHz */ + bus-frequency = <266666664>; /* 266.66 MHz */ + timebase-frequency = <33333333>; /* 33.33 MHz */ + }; + + PowerPC,P1020@1 { + i-cache-sets = <0x80>; + i-cache-size = <0x8000>; + i-cache-block-size = <0x20>; + d-cache-sets = <0x80>; + d-cache-size = <0x8000>; + d-cache-block-size = <0x20>; + cpu-release-addr = <0x00 0xffff240>; + enable-method = "spin-table"; + status = "disabled"; + clock-frequency = <533333328>; + bus-frequency = <266666664>; + timebase-frequency = <33333333>; + }; + }; + memory { + #address-cells = <2>; + #size-cells = <2>; + + reg = <0x00 0x00 0x00 0x10000000>; device_type = "memory"; }; + /* + * Usually, u-boot provided /memreserve/ properties by adding them during boot. + * these have been converted to reserved-memory entries. + */ + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + /* + * /memreserve/ 0x0000000000ffa000 0x0000000000004000; + * The kernel complains when booting: + * + * | OF: fdt: Reserved memory: failed to reserve memory for node + * 'firmware@ffa000': base 0x00ffa000, size 0 MiB + * + * But this likely uboot's bootargs + modified DTB. And if so, we don't care. + * This is because we rely on our own dtb that's in the simpleImage. + * + * Note: This is backed up by u-boot. just before the kernel executes + * it prints this final line: + * | Loading Device Tree to 00ff9000, end 00fff1c4 ... OK + * + * firmware@ffa000 { + * reg = <0x0 0xffa000 0x0 0x4000>; + * no-map; + * }; + */ + + // /memreserve/ 0x000000000fe2f000 0x0000000000000021; + firmware@fe2f000 { + reg = <0x0 0xfe2f000 0x0 0x21>; + no-map; + }; + + /* + * /memreserve/ 0x000000000ffff000 0x0000000000001000; + * that's the spin-table - see second CPU core binding. + */ + firmware@ffff000 { + reg = <0x0 0xffff000 0x0 0x1000>; + no-map; + }; + }; + board_lbc: lbc: localbus@ffe05000 { + bus-frequency = <16666666>; /* 16.66 MHz */ reg = <0 0xffe05000 0 0x1000>; ranges = <0x0 0x0 0x0 0xec000000 0x4000000>; @@ -117,8 +211,12 @@ board_soc: soc: soc@ffe00000 { ranges = <0x0 0x0 0xffe00000 0x100000>; + bus-frequency = <266666664>; spi0: spi@7000 { + #address-cells = <1>; + #size-cells = <0>; + temperature-sensor@1 { compatible = "ti,tmp125"; reg = <1>; @@ -136,6 +234,9 @@ compatible = "national,lp5521"; reg = <0x32>; clock-mode = /bits/ 8 <2>; + #address-cells = <1>; + #size-cells = <0>; + #if 1 led_fault_red: led@0 { reg = <0>; @@ -230,6 +331,9 @@ }; enet0: ethernet@b0000 { + rx-stash-idx = <0x00>; + rx-stash-len = <0x60>; + bd-stash; status = "okay"; phy-handle = <&phy0>; phy-connection-type = "rgmii-id"; @@ -242,6 +346,9 @@ }; enet2: ethernet@b2000 { + rx-stash-idx = <0x00>; + rx-stash-len = <0x60>; + bd-stash; status = "okay"; phy-handle = <&phy1>; phy-connection-type = "rgmii-id"; @@ -264,31 +371,22 @@ pci0: pcie@ffe09000 { reg = <0x0 0xffe09000 0x0 0x1000>; - ranges = <0x2000000 0x0 0xa0000000 0x0 0xa0000000 0x0 0x20000000 - 0x1000000 0x0 0x00000000 0x0 0xffc30000 0x0 0x10000>; + ranges = <0x2000000 0x0 0xa0000000 0x0 0xa0000000 0x0 0x20000000>, + <0x1000000 0x0 0x00000000 0x0 0xffc30000 0x0 0x10000>; pcie@0 { - ranges = <0x2000000 0x0 0xa0000000 - 0x2000000 0x0 0xa0000000 - 0x0 0x20000000 - - 0x1000000 0x0 0x0 - 0x1000000 0x0 0x0 - 0x0 0x100000>; + ranges = <0x2000000 0x0 0xa0000000 0x2000000 0x0 0xa0000000 0x0 0x20000000>, + <0x1000000 0x0 0x00000000 0x1000000 0x0 0x00000000 0x0 0x00100000>; }; }; pci1: pcie@ffe0a000 { reg = <0x0 0xffe0a000 0x0 0x1000>; - ranges = <0x2000000 0x0 0xc0000000 0x0 0xc0000000 0x0 0x20000000 - 0x1000000 0x0 0x00000000 0x0 0xffc20000 0x0 0x10000>; - pcie@0 { - ranges = <0x2000000 0x0 0xc0000000 - 0x2000000 0x0 0xc0000000 - 0x0 0x20000000 + ranges = <0x2000000 0x0 0xc0000000 0x0 0xc0000000 0x0 0x20000000>, + <0x1000000 0x0 0x00000000 0x0 0xffc20000 0x0 0x10000>; - 0x1000000 0x0 0x0 - 0x1000000 0x0 0x0 - 0x0 0x100000>; + pcie@0 { + ranges = <0x2000000 0x0 0xc0000000 0x2000000 0x0 0xc0000000 0x0 0x20000000>, + <0x1000000 0x0 0x00000000 0x1000000 0x0 0x00000000 0x0 0x00100000>; }; }; @@ -302,7 +400,15 @@ }; }; }; + /include/ "fsl/p1020si-post.dtsi" +&serial0 { + clock-frequency = <266666664>; +}; + +&serial1 { + clock-frequency = <266666664>; +}; /* * For the OpenWrt 22.03 release, since Linux 5.10.138 now uses diff --git a/target/linux/mpc85xx/image/p1020.mk b/target/linux/mpc85xx/image/p1020.mk index d3d7f93ddd..1d18a63dc0 100644 --- a/target/linux/mpc85xx/image/p1020.mk +++ b/target/linux/mpc85xx/image/p1020.mk @@ -18,9 +18,14 @@ define Device/aerohive_hiveap-330 DEVICE_PACKAGES := kmod-tpm-i2c-atmel kmod-hwmon-lm70 BLOCKSIZE := 128k KERNEL := kernel-bin | uImage none - KERNEL_INITRAMFS := kernel-bin | MultiImage none + KERNEL_INITRAMFS := kernel-bin | uImage none + KERNEL_NAME := simpleImage.hiveap-330 KERNEL_SIZE := 16m IMAGES := sysupgrade.bin + KERNEL_ENTRY := 0x1500000 + KERNEL_LOADADDR := 0x1500000 + # append-dtb is still needed, as otherwise u-boot bootm complains + # about not having a FDT to edit. IMAGE/sysupgrade.bin := append-dtb | pad-to 256k | append-kernel | \ append-rootfs | pad-rootfs | check-size | append-metadata IMAGE_SIZE = 63m diff --git a/target/linux/mpc85xx/p1020/target.mk b/target/linux/mpc85xx/p1020/target.mk index 8770edb9a9..5a5d0bf07d 100644 --- a/target/linux/mpc85xx/p1020/target.mk +++ b/target/linux/mpc85xx/p1020/target.mk @@ -1,5 +1,5 @@ BOARDNAME:=P1020 -KERNEL_IMAGES:=simpleImage.ws-ap3825i +KERNEL_IMAGES:=simpleImage.ws-ap3825i simpleImage.hiveap-330 define Target/Description Build firmware images for Freescale P1020 based boards. diff --git a/target/linux/mpc85xx/patches-5.15/101-powerpc-85xx-hiveap-330-support.patch b/target/linux/mpc85xx/patches-5.15/101-powerpc-85xx-hiveap-330-support.patch index da95cd2716..7d531e4ffc 100644 --- a/target/linux/mpc85xx/patches-5.15/101-powerpc-85xx-hiveap-330-support.patch +++ b/target/linux/mpc85xx/patches-5.15/101-powerpc-85xx-hiveap-330-support.patch @@ -28,3 +28,31 @@ obj-$(CONFIG_MPC8540_ADS) += mpc85xx_ads.o obj-$(CONFIG_MPC8560_ADS) += mpc85xx_ads.o obj-$(CONFIG_MPC85xx_CDS) += mpc85xx_cds.o +--- a/arch/powerpc/boot/Makefile ++++ b/arch/powerpc/boot/Makefile +@@ -163,6 +163,7 @@ src-plat-$(CONFIG_PPC_PSERIES) += pserie + src-plat-$(CONFIG_PPC_POWERNV) += pseries-head.S + src-plat-$(CONFIG_PPC_IBM_CELL_BLADE) += pseries-head.S + src-plat-$(CONFIG_MVME7100) += motload-head.S mvme7100.c ++src-plat-$(CONFIG_HIVEAP_330) += simpleboot.c fixed-head.S + src-plat-$(CONFIG_TL_WDR4900_V1) += simpleboot.c fixed-head.S + + src-plat-$(CONFIG_PPC_MICROWATT) += fixed-head.S microwatt.c +@@ -344,6 +345,7 @@ image-$(CONFIG_TQM8548) += cuImage.tqm + image-$(CONFIG_TQM8555) += cuImage.tqm8555 + image-$(CONFIG_TQM8560) += cuImage.tqm8560 + image-$(CONFIG_KSI8560) += cuImage.ksi8560 ++image-$(CONFIG_HIVEAP_330) += simpleImage.hiveap-330 + image-$(CONFIG_TL_WDR4900_V1) += simpleImage.tl-wdr4900-v1 + # Board ports in arch/powerpc/platform/86xx/Kconfig + image-$(CONFIG_MVME7100) += dtbImage.mvme7100 +--- a/arch/powerpc/boot/wrapper ++++ b/arch/powerpc/boot/wrapper +@@ -339,6 +339,7 @@ adder875-redboot) + platformo="$object/fixed-head.o $object/redboot-8xx.o" + binary=y + ;; ++simpleboot-hiveap-330|\ + simpleboot-tl-wdr4900-v1) + platformo="$object/fixed-head.o $object/simpleboot.o" + link_address='0x1500000' diff --git a/target/linux/mpc85xx/patches-5.15/107-powerpc-85xx-add-ws-ap3825i-support.patch b/target/linux/mpc85xx/patches-5.15/107-powerpc-85xx-add-ws-ap3825i-support.patch index 51da0f4527..9ccd9e877f 100644 --- a/target/linux/mpc85xx/patches-5.15/107-powerpc-85xx-add-ws-ap3825i-support.patch +++ b/target/linux/mpc85xx/patches-5.15/107-powerpc-85xx-add-ws-ap3825i-support.patch @@ -37,17 +37,17 @@ WS-AP3825i AP. obj-$(CONFIG_RED_15W_REV1) += red15w_rev1.o --- a/arch/powerpc/boot/Makefile +++ b/arch/powerpc/boot/Makefile -@@ -164,6 +164,7 @@ src-plat-$(CONFIG_PPC_POWERNV) += pserie - src-plat-$(CONFIG_PPC_IBM_CELL_BLADE) += pseries-head.S +@@ -165,6 +165,7 @@ src-plat-$(CONFIG_PPC_IBM_CELL_BLADE) += src-plat-$(CONFIG_MVME7100) += motload-head.S mvme7100.c + src-plat-$(CONFIG_HIVEAP_330) += simpleboot.c fixed-head.S src-plat-$(CONFIG_TL_WDR4900_V1) += simpleboot.c fixed-head.S +src-plat-$(CONFIG_WS_AP3825I) += simpleboot.c fixed-head.S src-plat-$(CONFIG_PPC_MICROWATT) += fixed-head.S microwatt.c -@@ -345,6 +346,7 @@ image-$(CONFIG_TQM8555) += cuImage.tqm - image-$(CONFIG_TQM8560) += cuImage.tqm8560 +@@ -347,6 +348,7 @@ image-$(CONFIG_TQM8560) += cuImage.tqm image-$(CONFIG_KSI8560) += cuImage.ksi8560 + image-$(CONFIG_HIVEAP_330) += simpleImage.hiveap-330 image-$(CONFIG_TL_WDR4900_V1) += simpleImage.tl-wdr4900-v1 +image-$(CONFIG_WS_AP3825I) += simpleImage.ws-ap3825i # Board ports in arch/powerpc/platform/86xx/Kconfig @@ -55,10 +55,10 @@ WS-AP3825i AP. --- a/arch/powerpc/boot/wrapper +++ b/arch/powerpc/boot/wrapper -@@ -339,6 +339,7 @@ adder875-redboot) - platformo="$object/fixed-head.o $object/redboot-8xx.o" +@@ -340,6 +340,7 @@ adder875-redboot) binary=y ;; + simpleboot-hiveap-330|\ +simpleboot-ws-ap3825i|\ simpleboot-tl-wdr4900-v1) platformo="$object/fixed-head.o $object/simpleboot.o" diff --git a/target/linux/mpc85xx/patches-5.15/109-powerpc-85xx-add-ws-ap3715i-support.patch b/target/linux/mpc85xx/patches-5.15/109-powerpc-85xx-add-ws-ap3715i-support.patch index 692cef0417..59f3184295 100644 --- a/target/linux/mpc85xx/patches-5.15/109-powerpc-85xx-add-ws-ap3715i-support.patch +++ b/target/linux/mpc85xx/patches-5.15/109-powerpc-85xx-add-ws-ap3715i-support.patch @@ -30,9 +30,9 @@ obj-$(CONFIG_CORENET_GENERIC) += corenet_generic.o --- a/arch/powerpc/boot/Makefile +++ b/arch/powerpc/boot/Makefile -@@ -346,6 +346,7 @@ image-$(CONFIG_TQM8555) += cuImage.tqm - image-$(CONFIG_TQM8560) += cuImage.tqm8560 +@@ -348,6 +348,7 @@ image-$(CONFIG_TQM8560) += cuImage.tqm image-$(CONFIG_KSI8560) += cuImage.ksi8560 + image-$(CONFIG_HIVEAP_330) += simpleImage.hiveap-330 image-$(CONFIG_TL_WDR4900_V1) += simpleImage.tl-wdr4900-v1 +image-$(CONFIG_WS_AP3715I) += simpleImage.ws-ap3715i image-$(CONFIG_WS_AP3825I) += simpleImage.ws-ap3825i @@ -40,10 +40,10 @@ image-$(CONFIG_MVME7100) += dtbImage.mvme7100 --- a/arch/powerpc/boot/wrapper +++ b/arch/powerpc/boot/wrapper -@@ -339,6 +339,7 @@ adder875-redboot) - platformo="$object/fixed-head.o $object/redboot-8xx.o" +@@ -340,6 +340,7 @@ adder875-redboot) binary=y ;; + simpleboot-hiveap-330|\ +simpleboot-ws-ap3715i|\ simpleboot-ws-ap3825i|\ simpleboot-tl-wdr4900-v1) diff --git a/target/linux/mpc85xx/patches-5.15/110-powerpc-85xx-br200-wp-support.patch b/target/linux/mpc85xx/patches-5.15/110-powerpc-85xx-br200-wp-support.patch index eb70a4c4c4..21a26f1a73 100644 --- a/target/linux/mpc85xx/patches-5.15/110-powerpc-85xx-br200-wp-support.patch +++ b/target/linux/mpc85xx/patches-5.15/110-powerpc-85xx-br200-wp-support.patch @@ -34,17 +34,17 @@ src-plat-$(CONFIG_PPC_IBM_CELL_BLADE) += pseries-head.S src-plat-$(CONFIG_MVME7100) += motload-head.S mvme7100.c +src-plat-$(CONFIG_BR200_WP) += simpleboot.c fixed-head.S + src-plat-$(CONFIG_HIVEAP_330) += simpleboot.c fixed-head.S src-plat-$(CONFIG_TL_WDR4900_V1) += simpleboot.c fixed-head.S src-plat-$(CONFIG_WS_AP3825I) += simpleboot.c fixed-head.S - -@@ -345,6 +346,7 @@ image-$(CONFIG_TQM8548) += cuImage.tqm +@@ -346,6 +347,7 @@ image-$(CONFIG_TQM8548) += cuImage.tqm image-$(CONFIG_TQM8555) += cuImage.tqm8555 image-$(CONFIG_TQM8560) += cuImage.tqm8560 image-$(CONFIG_KSI8560) += cuImage.ksi8560 +image-$(CONFIG_BR200_WP) += simpleImage.br200-wp + image-$(CONFIG_HIVEAP_330) += simpleImage.hiveap-330 image-$(CONFIG_TL_WDR4900_V1) += simpleImage.tl-wdr4900-v1 image-$(CONFIG_WS_AP3715I) += simpleImage.ws-ap3715i - image-$(CONFIG_WS_AP3825I) += simpleImage.ws-ap3825i --- a/arch/powerpc/boot/wrapper +++ b/arch/powerpc/boot/wrapper @@ -339,6 +339,7 @@ adder875-redboot) @@ -52,6 +52,6 @@ binary=y ;; +simpleboot-br200-wp|\ + simpleboot-hiveap-330|\ simpleboot-ws-ap3715i|\ simpleboot-ws-ap3825i|\ - simpleboot-tl-wdr4900-v1) diff --git a/target/linux/mpc85xx/patches-5.15/900-powerpc-bootwrapper-disable-uImage-generation.patch b/target/linux/mpc85xx/patches-5.15/900-powerpc-bootwrapper-disable-uImage-generation.patch index 1af5aefe0b..7f99bd5211 100644 --- a/target/linux/mpc85xx/patches-5.15/900-powerpc-bootwrapper-disable-uImage-generation.patch +++ b/target/linux/mpc85xx/patches-5.15/900-powerpc-bootwrapper-disable-uImage-generation.patch @@ -16,7 +16,7 @@ Signed-off-by: David Bauer --- a/arch/powerpc/boot/Makefile +++ b/arch/powerpc/boot/Makefile -@@ -274,7 +274,6 @@ image-$(CONFIG_PPC_CHRP) += zImage.chrp +@@ -275,7 +275,6 @@ image-$(CONFIG_PPC_CHRP) += zImage.chrp image-$(CONFIG_PPC_EFIKA) += zImage.chrp image-$(CONFIG_PPC_PMAC) += zImage.pmac image-$(CONFIG_PPC_HOLLY) += dtbImage.holly @@ -24,7 +24,7 @@ Signed-off-by: David Bauer image-$(CONFIG_EPAPR_BOOT) += zImage.epapr # -@@ -409,15 +408,6 @@ $(obj)/dtbImage.%: vmlinux $(wrapperbits +@@ -411,15 +410,6 @@ $(obj)/dtbImage.%: vmlinux $(wrapperbits $(obj)/vmlinux.strip: vmlinux $(STRIP) -s -R .comment $< -o $@ diff --git a/target/linux/mpc85xx/patches-6.1/101-powerpc-85xx-hiveap-330-support.patch b/target/linux/mpc85xx/patches-6.1/101-powerpc-85xx-hiveap-330-support.patch index fe8745361d..e8b6632f2b 100644 --- a/target/linux/mpc85xx/patches-6.1/101-powerpc-85xx-hiveap-330-support.patch +++ b/target/linux/mpc85xx/patches-6.1/101-powerpc-85xx-hiveap-330-support.patch @@ -28,3 +28,31 @@ obj-$(CONFIG_MPC8540_ADS) += mpc85xx_ads.o obj-$(CONFIG_MPC8560_ADS) += mpc85xx_ads.o obj-$(CONFIG_MPC85xx_CDS) += mpc85xx_cds.o +--- a/arch/powerpc/boot/Makefile ++++ b/arch/powerpc/boot/Makefile +@@ -179,6 +179,7 @@ src-plat-$(CONFIG_PPC_PSERIES) += pserie + src-plat-$(CONFIG_PPC_POWERNV) += pseries-head.S + src-plat-$(CONFIG_PPC_IBM_CELL_BLADE) += pseries-head.S + src-plat-$(CONFIG_MVME7100) += motload-head.S mvme7100.c ++src-plat-$(CONFIG_HIVEAP_330) += simpleboot.c fixed-head.S + src-plat-$(CONFIG_TL_WDR4900_V1) += simpleboot.c fixed-head.S + + src-plat-$(CONFIG_PPC_MICROWATT) += fixed-head.S microwatt.c +@@ -360,6 +361,7 @@ image-$(CONFIG_TQM8548) += cuImage.tqm + image-$(CONFIG_TQM8555) += cuImage.tqm8555 + image-$(CONFIG_TQM8560) += cuImage.tqm8560 + image-$(CONFIG_KSI8560) += cuImage.ksi8560 ++image-$(CONFIG_HIVEAP_330) += simpleImage.hiveap-330 + image-$(CONFIG_TL_WDR4900_V1) += simpleImage.tl-wdr4900-v1 + # Board ports in arch/powerpc/platform/86xx/Kconfig + image-$(CONFIG_MVME7100) += dtbImage.mvme7100 +--- a/arch/powerpc/boot/wrapper ++++ b/arch/powerpc/boot/wrapper +@@ -341,6 +341,7 @@ adder875-redboot) + platformo="$object/fixed-head.o $object/redboot-8xx.o" + binary=y + ;; ++simpleboot-hiveap-330|\ + simpleboot-tl-wdr4900-v1) + platformo="$object/fixed-head.o $object/simpleboot.o" + link_address='0x1500000' diff --git a/target/linux/mpc85xx/patches-6.1/107-powerpc-85xx-add-ws-ap3825i-support.patch b/target/linux/mpc85xx/patches-6.1/107-powerpc-85xx-add-ws-ap3825i-support.patch index fb697e1d1f..63e7e46bbc 100644 --- a/target/linux/mpc85xx/patches-6.1/107-powerpc-85xx-add-ws-ap3825i-support.patch +++ b/target/linux/mpc85xx/patches-6.1/107-powerpc-85xx-add-ws-ap3825i-support.patch @@ -37,17 +37,17 @@ WS-AP3825i AP. obj-$(CONFIG_RED_15W_REV1) += red15w_rev1.o --- a/arch/powerpc/boot/Makefile +++ b/arch/powerpc/boot/Makefile -@@ -180,6 +180,7 @@ src-plat-$(CONFIG_PPC_POWERNV) += pserie - src-plat-$(CONFIG_PPC_IBM_CELL_BLADE) += pseries-head.S +@@ -181,6 +181,7 @@ src-plat-$(CONFIG_PPC_IBM_CELL_BLADE) += src-plat-$(CONFIG_MVME7100) += motload-head.S mvme7100.c + src-plat-$(CONFIG_HIVEAP_330) += simpleboot.c fixed-head.S src-plat-$(CONFIG_TL_WDR4900_V1) += simpleboot.c fixed-head.S +src-plat-$(CONFIG_WS_AP3825I) += simpleboot.c fixed-head.S src-plat-$(CONFIG_PPC_MICROWATT) += fixed-head.S microwatt.c -@@ -361,6 +362,7 @@ image-$(CONFIG_TQM8555) += cuImage.tqm - image-$(CONFIG_TQM8560) += cuImage.tqm8560 +@@ -363,6 +364,7 @@ image-$(CONFIG_TQM8560) += cuImage.tqm image-$(CONFIG_KSI8560) += cuImage.ksi8560 + image-$(CONFIG_HIVEAP_330) += simpleImage.hiveap-330 image-$(CONFIG_TL_WDR4900_V1) += simpleImage.tl-wdr4900-v1 +image-$(CONFIG_WS_AP3825I) += simpleImage.ws-ap3825i # Board ports in arch/powerpc/platform/86xx/Kconfig @@ -55,10 +55,10 @@ WS-AP3825i AP. --- a/arch/powerpc/boot/wrapper +++ b/arch/powerpc/boot/wrapper -@@ -341,6 +341,7 @@ adder875-redboot) - platformo="$object/fixed-head.o $object/redboot-8xx.o" +@@ -342,6 +342,7 @@ adder875-redboot) binary=y ;; + simpleboot-hiveap-330|\ +simpleboot-ws-ap3825i|\ simpleboot-tl-wdr4900-v1) platformo="$object/fixed-head.o $object/simpleboot.o" diff --git a/target/linux/mpc85xx/patches-6.1/109-powerpc-85xx-add-ws-ap3715i-support.patch b/target/linux/mpc85xx/patches-6.1/109-powerpc-85xx-add-ws-ap3715i-support.patch index 8f34f14d54..f8e33ae637 100644 --- a/target/linux/mpc85xx/patches-6.1/109-powerpc-85xx-add-ws-ap3715i-support.patch +++ b/target/linux/mpc85xx/patches-6.1/109-powerpc-85xx-add-ws-ap3715i-support.patch @@ -30,9 +30,9 @@ obj-$(CONFIG_CORENET_GENERIC) += corenet_generic.o --- a/arch/powerpc/boot/Makefile +++ b/arch/powerpc/boot/Makefile -@@ -362,6 +362,7 @@ image-$(CONFIG_TQM8555) += cuImage.tqm - image-$(CONFIG_TQM8560) += cuImage.tqm8560 +@@ -364,6 +364,7 @@ image-$(CONFIG_TQM8560) += cuImage.tqm image-$(CONFIG_KSI8560) += cuImage.ksi8560 + image-$(CONFIG_HIVEAP_330) += simpleImage.hiveap-330 image-$(CONFIG_TL_WDR4900_V1) += simpleImage.tl-wdr4900-v1 +image-$(CONFIG_WS_AP3715I) += simpleImage.ws-ap3715i image-$(CONFIG_WS_AP3825I) += simpleImage.ws-ap3825i @@ -40,10 +40,10 @@ image-$(CONFIG_MVME7100) += dtbImage.mvme7100 --- a/arch/powerpc/boot/wrapper +++ b/arch/powerpc/boot/wrapper -@@ -341,6 +341,7 @@ adder875-redboot) - platformo="$object/fixed-head.o $object/redboot-8xx.o" +@@ -342,6 +342,7 @@ adder875-redboot) binary=y ;; + simpleboot-hiveap-330|\ +simpleboot-ws-ap3715i|\ simpleboot-ws-ap3825i|\ simpleboot-tl-wdr4900-v1) diff --git a/target/linux/mpc85xx/patches-6.1/110-powerpc-85xx-br200-wp-support.patch b/target/linux/mpc85xx/patches-6.1/110-powerpc-85xx-br200-wp-support.patch index 430af1efb1..b063b3dab7 100644 --- a/target/linux/mpc85xx/patches-6.1/110-powerpc-85xx-br200-wp-support.patch +++ b/target/linux/mpc85xx/patches-6.1/110-powerpc-85xx-br200-wp-support.patch @@ -34,17 +34,17 @@ src-plat-$(CONFIG_PPC_IBM_CELL_BLADE) += pseries-head.S src-plat-$(CONFIG_MVME7100) += motload-head.S mvme7100.c +src-plat-$(CONFIG_BR200_WP) += simpleboot.c fixed-head.S + src-plat-$(CONFIG_HIVEAP_330) += simpleboot.c fixed-head.S src-plat-$(CONFIG_TL_WDR4900_V1) += simpleboot.c fixed-head.S src-plat-$(CONFIG_WS_AP3825I) += simpleboot.c fixed-head.S - -@@ -361,6 +362,7 @@ image-$(CONFIG_TQM8548) += cuImage.tqm +@@ -362,6 +363,7 @@ image-$(CONFIG_TQM8548) += cuImage.tqm image-$(CONFIG_TQM8555) += cuImage.tqm8555 image-$(CONFIG_TQM8560) += cuImage.tqm8560 image-$(CONFIG_KSI8560) += cuImage.ksi8560 +image-$(CONFIG_BR200_WP) += simpleImage.br200-wp + image-$(CONFIG_HIVEAP_330) += simpleImage.hiveap-330 image-$(CONFIG_TL_WDR4900_V1) += simpleImage.tl-wdr4900-v1 image-$(CONFIG_WS_AP3715I) += simpleImage.ws-ap3715i - image-$(CONFIG_WS_AP3825I) += simpleImage.ws-ap3825i --- a/arch/powerpc/boot/wrapper +++ b/arch/powerpc/boot/wrapper @@ -341,6 +341,7 @@ adder875-redboot) @@ -52,6 +52,6 @@ binary=y ;; +simpleboot-br200-wp|\ + simpleboot-hiveap-330|\ simpleboot-ws-ap3715i|\ simpleboot-ws-ap3825i|\ - simpleboot-tl-wdr4900-v1) diff --git a/target/linux/mpc85xx/patches-6.1/900-powerpc-bootwrapper-disable-uImage-generation.patch b/target/linux/mpc85xx/patches-6.1/900-powerpc-bootwrapper-disable-uImage-generation.patch index f1e0f73f88..648aa0421d 100644 --- a/target/linux/mpc85xx/patches-6.1/900-powerpc-bootwrapper-disable-uImage-generation.patch +++ b/target/linux/mpc85xx/patches-6.1/900-powerpc-bootwrapper-disable-uImage-generation.patch @@ -16,7 +16,7 @@ Signed-off-by: David Bauer --- a/arch/powerpc/boot/Makefile +++ b/arch/powerpc/boot/Makefile -@@ -290,7 +290,6 @@ image-$(CONFIG_PPC_CHRP) += zImage.chrp +@@ -291,7 +291,6 @@ image-$(CONFIG_PPC_CHRP) += zImage.chrp image-$(CONFIG_PPC_EFIKA) += zImage.chrp image-$(CONFIG_PPC_PMAC) += zImage.pmac image-$(CONFIG_PPC_HOLLY) += dtbImage.holly @@ -24,7 +24,7 @@ Signed-off-by: David Bauer image-$(CONFIG_EPAPR_BOOT) += zImage.epapr # -@@ -425,15 +424,6 @@ $(obj)/dtbImage.%: vmlinux $(wrapperbits +@@ -427,15 +426,6 @@ $(obj)/dtbImage.%: vmlinux $(wrapperbits $(obj)/vmlinux.strip: vmlinux $(STRIP) -s -R .comment $< -o $@