From: Jo-Philipp Wich Date: Tue, 4 May 2010 21:00:14 +0000 (+0000) Subject: add OCF 20100325 support to brcm-2.4 X-Git-Tag: reboot~19949 X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=0ff83e90ba5f0ed1d900813b470f61527500fdd8;p=openwrt%2Fopenwrt.git add OCF 20100325 support to brcm-2.4 SVN-Revision: 21357 --- diff --git a/target/linux/generic-2.4/config-default b/target/linux/generic-2.4/config-default index 7871a27885..c5348ca0d7 100644 --- a/target/linux/generic-2.4/config-default +++ b/target/linux/generic-2.4/config-default @@ -243,6 +243,7 @@ CONFIG_IP_NF_MATCH_CONDITION=m CONFIG_IP_NF_MATCH_CONNBYTES=m CONFIG_IP_NF_MATCH_CONNMARK=m CONFIG_IP_NF_MATCH_CONNTRACK=m +CONFIG_IP_NF_MATCH_COMMENT=m CONFIG_IP_NF_MATCH_DSCP=m CONFIG_IP_NF_MATCH_ECN=m CONFIG_IP_NF_MATCH_HELPER=m @@ -576,6 +577,20 @@ CONFIG_NONCOHERENT_IO=y CONFIG_NTFS_FS=m # CONFIG_NTFS_RW is not set # CONFIG_NVRAM is not set +# CONFIG_OCF_BENCH is not set +# CONFIG_OCF_C7108 is not set +# CONFIG_OCF_CRYPTODEV is not set +# CONFIG_OCF_CRYPTOSOFT is not set +# CONFIG_OCF_EP80579 is not set +# CONFIG_OCF_FIPS is not set +# CONFIG_OCF_HIFN is not set +# CONFIG_OCF_IXP4XX is not set +# CONFIG_OCF_OCF is not set +# CONFIG_OCF_OCFNULL is not set +# CONFIG_OCF_PASEMI is not set +# CONFIG_OCF_RANDOMHARVEST is not set +# CONFIG_OCF_SAFE is not set +# CONFIG_OCF_TALITOS is not set # CONFIG_OLIVETTI_M700 is not set # CONFIG_OOM_KILLER is not set # CONFIG_OSF_PARTITION is not set diff --git a/target/linux/generic-2.4/files/crypto/ocf/Config.in b/target/linux/generic-2.4/files/crypto/ocf/Config.in new file mode 100644 index 0000000000..d722cba299 --- /dev/null +++ b/target/linux/generic-2.4/files/crypto/ocf/Config.in @@ -0,0 +1,36 @@ +############################################################################# + +mainmenu_option next_comment +comment 'OCF Configuration' +tristate 'OCF (Open Cryptograhic Framework)' CONFIG_OCF_OCF +dep_mbool ' enable fips RNG checks (fips check on RNG data before use)' \ + CONFIG_OCF_FIPS $CONFIG_OCF_OCF +dep_mbool ' enable harvesting entropy for /dev/random' \ + CONFIG_OCF_RANDOMHARVEST $CONFIG_OCF_OCF +dep_tristate ' cryptodev (user space support)' \ + CONFIG_OCF_CRYPTODEV $CONFIG_OCF_OCF +dep_tristate ' cryptosoft (software crypto engine)' \ + CONFIG_OCF_CRYPTOSOFT $CONFIG_OCF_OCF +dep_tristate ' safenet (HW crypto engine)' \ + CONFIG_OCF_SAFE $CONFIG_OCF_OCF +dep_tristate ' IXP4xx (HW crypto engine)' \ + CONFIG_OCF_IXP4XX $CONFIG_OCF_OCF +dep_mbool ' Enable IXP4xx HW to perform SHA1 and MD5 hashing (very slow)' \ + CONFIG_OCF_IXP4XX_SHA1_MD5 $CONFIG_OCF_IXP4XX +dep_tristate ' hifn (HW crypto engine)' \ + CONFIG_OCF_HIFN $CONFIG_OCF_OCF +dep_tristate ' talitos (HW crypto engine)' \ + CONFIG_OCF_TALITOS $CONFIG_OCF_OCF +dep_tristate ' pasemi (HW crypto engine)' \ + CONFIG_OCF_PASEMI $CONFIG_OCF_OCF +dep_tristate ' ep80579 (HW crypto engine)' \ + CONFIG_OCF_EP80579 $CONFIG_OCF_OCF +dep_tristate ' Micronas c7108 (HW crypto engine)' \ + CONFIG_OCF_C7108 $CONFIG_OCF_OCF +dep_tristate ' ocfnull (does no crypto)' \ + CONFIG_OCF_OCFNULL $CONFIG_OCF_OCF +dep_tristate ' ocf-bench (HW crypto in-kernel benchmark)' \ + CONFIG_OCF_BENCH $CONFIG_OCF_OCF +endmenu + +############################################################################# diff --git a/target/linux/generic-2.4/files/crypto/ocf/Kconfig b/target/linux/generic-2.4/files/crypto/ocf/Kconfig new file mode 100644 index 0000000000..b9c24fff4b --- /dev/null +++ b/target/linux/generic-2.4/files/crypto/ocf/Kconfig @@ -0,0 +1,119 @@ +menu "OCF Configuration" + +config OCF_OCF + tristate "OCF (Open Cryptograhic Framework)" + help + A linux port of the OpenBSD/FreeBSD crypto framework. + +config OCF_RANDOMHARVEST + bool "crypto random --- harvest entropy for /dev/random" + depends on OCF_OCF + help + Includes code to harvest random numbers from devices that support it. + +config OCF_FIPS + bool "enable fips RNG checks" + depends on OCF_OCF && OCF_RANDOMHARVEST + help + Run all RNG provided data through a fips check before + adding it /dev/random's entropy pool. + +config OCF_CRYPTODEV + tristate "cryptodev (user space support)" + depends on OCF_OCF + help + The user space API to access crypto hardware. + +config OCF_CRYPTOSOFT + tristate "cryptosoft (software crypto engine)" + depends on OCF_OCF + help + A software driver for the OCF framework that uses + the kernel CryptoAPI. + +config OCF_SAFE + tristate "safenet (HW crypto engine)" + depends on OCF_OCF + help + A driver for a number of the safenet Excel crypto accelerators. + Currently tested and working on the 1141 and 1741. + +config OCF_IXP4XX + tristate "IXP4xx (HW crypto engine)" + depends on OCF_OCF + help + XScale IXP4xx crypto accelerator driver. Requires the + Intel Access library. + +config OCF_IXP4XX_SHA1_MD5 + bool "IXP4xx SHA1 and MD5 Hashing" + depends on OCF_IXP4XX + help + Allows the IXP4xx crypto accelerator to perform SHA1 and MD5 hashing. + Note: this is MUCH slower than using cryptosoft (software crypto engine). + +config OCF_HIFN + tristate "hifn (HW crypto engine)" + depends on OCF_OCF + help + OCF driver for various HIFN based crypto accelerators. + (7951, 7955, 7956, 7751, 7811) + +config OCF_HIFNHIPP + tristate "Hifn HIPP (HW packet crypto engine)" + depends on OCF_OCF + help + OCF driver for various HIFN (HIPP) based crypto accelerators + (7855) + +config OCF_TALITOS + tristate "talitos (HW crypto engine)" + depends on OCF_OCF + help + OCF driver for Freescale's security engine (SEC/talitos). + +config OCF_PASEMI + tristate "pasemi (HW crypto engine)" + depends on OCF_OCF && PPC_PASEMI + help + OCF driver for the PA Semi PWRficient DMA Engine + +config OCF_EP80579 + tristate "ep80579 (HW crypto engine)" + depends on OCF_OCF + help + OCF driver for the Intel EP80579 Integrated Processor Product Line. + +config OCF_CRYPTOCTEON + tristate "cryptocteon (HW crypto engine)" + depends on OCF_OCF + help + OCF driver for the Cavium OCTEON Processors. + +config OCF_KIRKWOOD + tristate "kirkwood (HW crypto engine)" + depends on OCF_OCF + help + OCF driver for the Marvell Kirkwood (88F6xxx) Processors. + +config OCF_C7108 + tristate "Micronas 7108 (HW crypto engine)" + depends on OCF_OCF + help + OCF driver for the Microna 7108 Cipher processors. + +config OCF_OCFNULL + tristate "ocfnull (fake crypto engine)" + depends on OCF_OCF + help + OCF driver for measuring ipsec overheads (does no crypto) + +config OCF_BENCH + tristate "ocf-bench (HW crypto in-kernel benchmark)" + depends on OCF_OCF + help + A very simple encryption test for the in-kernel interface + of OCF. Also includes code to benchmark the IXP Access library + for comparison. + +endmenu diff --git a/target/linux/generic-2.4/files/crypto/ocf/Makefile b/target/linux/generic-2.4/files/crypto/ocf/Makefile new file mode 100644 index 0000000000..fa951f401c --- /dev/null +++ b/target/linux/generic-2.4/files/crypto/ocf/Makefile @@ -0,0 +1,124 @@ +# for SGlinux builds +-include $(ROOTDIR)/modules/.config + +OCF_OBJS = crypto.o criov.o + +ifdef CONFIG_OCF_RANDOMHARVEST + OCF_OBJS += random.o +endif + +ifdef CONFIG_OCF_FIPS + OCF_OBJS += rndtest.o +endif + +# Add in autoconf.h to get #defines for CONFIG_xxx +AUTOCONF_H=$(ROOTDIR)/modules/autoconf.h +ifeq ($(AUTOCONF_H), $(wildcard $(AUTOCONF_H))) + EXTRA_CFLAGS += -include $(AUTOCONF_H) + export EXTRA_CFLAGS +endif + +ifndef obj + obj ?= . + _obj = subdir + mod-subdirs := safe hifn ixp4xx talitos ocfnull + export-objs += crypto.o criov.o random.o + list-multi += ocf.o + _slash := +else + _obj = obj + _slash := / +endif + +EXTRA_CFLAGS += -I$(obj)/. + +obj-$(CONFIG_OCF_OCF) += ocf.o +obj-$(CONFIG_OCF_CRYPTODEV) += cryptodev.o +obj-$(CONFIG_OCF_CRYPTOSOFT) += cryptosoft.o +obj-$(CONFIG_OCF_BENCH) += ocf-bench.o + +$(_obj)-$(CONFIG_OCF_SAFE) += safe$(_slash) +$(_obj)-$(CONFIG_OCF_HIFN) += hifn$(_slash) +$(_obj)-$(CONFIG_OCF_IXP4XX) += ixp4xx$(_slash) +$(_obj)-$(CONFIG_OCF_TALITOS) += talitos$(_slash) +$(_obj)-$(CONFIG_OCF_PASEMI) += pasemi$(_slash) +$(_obj)-$(CONFIG_OCF_EP80579) += ep80579$(_slash) +$(_obj)-$(CONFIG_OCF_CRYPTOCTEON) += cryptocteon$(_slash) +$(_obj)-$(CONFIG_OCF_KIRKWOOD) += kirkwood$(_slash) +$(_obj)-$(CONFIG_OCF_OCFNULL) += ocfnull$(_slash) +$(_obj)-$(CONFIG_OCF_C7108) += c7108$(_slash) + +ocf-objs := $(OCF_OBJS) + +$(list-multi) dummy1: $(ocf-objs) + $(LD) -r -o $@ $(ocf-objs) + +.PHONY: +clean: + rm -f *.o *.ko .*.o.flags .*.ko.cmd .*.o.cmd .*.mod.o.cmd *.mod.c + rm -f */*.o */*.ko */.*.o.cmd */.*.ko.cmd */.*.mod.o.cmd */*.mod.c */.*.o.flags + +ifdef TOPDIR +-include $(TOPDIR)/Rules.make +endif + +# +# release gen targets +# + +.PHONY: patch +patch: + REL=`date +%Y%m%d`; \ + patch=ocf-linux-$$REL.patch; \ + patch24=ocf-linux-24-$$REL.patch; \ + patch26=ocf-linux-26-$$REL.patch; \ + ( \ + find . -name Makefile; \ + find . -name Config.in; \ + find . -name Kconfig; \ + find . -name README; \ + find . -name '*.[ch]' | grep -v '.mod.c'; \ + ) | while read t; do \ + diff -Nau /dev/null $$t | sed 's?^+++ \./?+++ linux/crypto/ocf/?'; \ + done > $$patch; \ + cat patches/linux-2.4.35-ocf.patch $$patch > $$patch24; \ + cat patches/linux-2.6.33-ocf.patch $$patch > $$patch26 + +.PHONY: tarball +tarball: + REL=`date +%Y%m%d`; RELDIR=/tmp/ocf-linux-$$REL; \ + CURDIR=`pwd`; \ + rm -rf /tmp/ocf-linux-$$REL*; \ + mkdir -p $$RELDIR/tools; \ + cp README* $$RELDIR; \ + cp patches/openss*.patch $$RELDIR; \ + cp patches/crypto-tools.patch $$RELDIR; \ + cp tools/[!C]* $$RELDIR/tools; \ + cd ..; \ + tar cvf $$RELDIR/ocf-linux.tar \ + --exclude=CVS \ + --exclude=.* \ + --exclude=*.o \ + --exclude=*.ko \ + --exclude=*.mod.* \ + --exclude=README* \ + --exclude=ocf-*.patch \ + --exclude=ocf/patches/openss*.patch \ + --exclude=ocf/patches/crypto-tools.patch \ + --exclude=ocf/tools \ + ocf; \ + gzip -9 $$RELDIR/ocf-linux.tar; \ + cd /tmp; \ + tar cvf ocf-linux-$$REL.tar ocf-linux-$$REL; \ + gzip -9 ocf-linux-$$REL.tar; \ + cd $$CURDIR/../../user; \ + rm -rf /tmp/crypto-tools-$$REL*; \ + tar cvf /tmp/crypto-tools-$$REL.tar \ + --exclude=CVS \ + --exclude=.* \ + --exclude=*.o \ + --exclude=cryptotest \ + --exclude=cryptokeytest \ + crypto-tools; \ + gzip -9 /tmp/crypto-tools-$$REL.tar + diff --git a/target/linux/generic-2.4/files/crypto/ocf/README b/target/linux/generic-2.4/files/crypto/ocf/README new file mode 100644 index 0000000000..5ac39f7304 --- /dev/null +++ b/target/linux/generic-2.4/files/crypto/ocf/README @@ -0,0 +1,167 @@ +README - ocf-linux-20100325 +--------------------------- + +This README provides instructions for getting ocf-linux compiled and +operating in a generic linux environment. For other information you +might like to visit the home page for this project: + + http://ocf-linux.sourceforge.net/ + +Adding OCF to linux +------------------- + + Not much in this file for now, just some notes. I usually build + the ocf support as modules but it can be built into the kernel as + well. To use it: + + * mknod /dev/crypto c 10 70 + + * to add OCF to your kernel source, you have two options. Apply + the kernel specific patch: + + cd linux-2.4*; gunzip < ocf-linux-24-XXXXXXXX.patch.gz | patch -p1 + cd linux-2.6*; gunzip < ocf-linux-26-XXXXXXXX.patch.gz | patch -p1 + + if you do one of the above, then you can proceed to the next step, + or you can do the above process by hand with using the patches against + linux-2.4.35 and 2.6.33 to include the ocf code under crypto/ocf. + Here's how to add it: + + for 2.4.35 (and later) + + cd linux-2.4.35/crypto + tar xvzf ocf-linux.tar.gz + cd .. + patch -p1 < crypto/ocf/patches/linux-2.4.35-ocf.patch + + for 2.6.23 (and later), find the kernel patch specific (or nearest) + to your kernel versions and then: + + cd linux-2.6.NN/crypto + tar xvzf ocf-linux.tar.gz + cd .. + patch -p1 < crypto/ocf/patches/linux-2.6.NN-ocf.patch + + It should be easy to take this patch and apply it to other more + recent versions of the kernels. The same patches should also work + relatively easily on kernels as old as 2.6.11 and 2.4.18. + + * under 2.4 if you are on a non-x86 platform, you may need to: + + cp linux-2.X.x/include/asm-i386/kmap_types.h linux-2.X.x/include/asm-YYY + + so that you can build the kernel crypto support needed for the cryptosoft + driver. + + * For simplicity you should enable all the crypto support in your kernel + except for the test driver. Likewise for the OCF options. Do not + enable OCF crypto drivers for HW that you do not have (for example + ixp4xx will not compile on non-Xscale systems). + + * make sure that cryptodev.h (from ocf-linux.tar.gz) is installed as + crypto/cryptodev.h in an include directory that is used for building + applications for your platform. For example on a host system that + might be: + + /usr/include/crypto/cryptodev.h + + * patch your openssl-0.9.8n code with the openssl-0.9.8n.patch. + (NOTE: there is no longer a need to patch ssh). The patch is against: + openssl-0_9_8e + + If you need a patch for an older version of openssl, you should look + to older OCF releases. This patch is unlikely to work on older + openssl versions. + + openssl-0.9.8n.patch + - enables --with-cryptodev for non BSD systems + - adds -cpu option to openssl speed for calculating CPU load + under linux + - fixes null pointer in openssl speed multi thread output. + - fixes test keys to work with linux crypto's more stringent + key checking. + - adds MD5/SHA acceleration (Ronen Shitrit), only enabled + with the --with-cryptodev-digests option + - fixes bug in engine code caching. + + * build crypto-tools-XXXXXXXX.tar.gz if you want to try some of the BSD + tools for testing OCF (ie., cryptotest). + +How to load the OCF drivers +--------------------------- + + First insert the base modules: + + insmod ocf + insmod cryptodev + + You can then install the software OCF driver with: + + insmod cryptosoft + + and one or more of the OCF HW drivers with: + + insmod safe + insmod hifn7751 + insmod ixp4xx + ... + + all the drivers take a debug option to enable verbose debug so that + you can see what is going on. For debug you load them as: + + insmod ocf crypto_debug=1 + insmod cryptodev cryptodev_debug=1 + insmod cryptosoft swcr_debug=1 + + You may load more than one OCF crypto driver but then there is no guarantee + as to which will be used. + + You can also enable debug at run time on 2.6 systems with the following: + + echo 1 > /sys/module/ocf/parameters/crypto_debug + echo 1 > /sys/module/cryptodev/parameters/cryptodev_debug + echo 1 > /sys/module/cryptosoft/parameters/swcr_debug + echo 1 > /sys/module/hifn7751/parameters/hifn_debug + echo 1 > /sys/module/safe/parameters/safe_debug + echo 1 > /sys/module/ixp4xx/parameters/ixp_debug + ... + +Testing the OCF support +----------------------- + + run "cryptotest", it should do a short test for a couple of + des packets. If it does everything is working. + + If this works, then ssh will use the driver when invoked as: + + ssh -c 3des username@host + + to see for sure that it is operating, enable debug as defined above. + + To get a better idea of performance run: + + cryptotest 100 4096 + + There are more options to cryptotest, see the help. + + It is also possible to use openssl to test the speed of the crypto + drivers. + + openssl speed -evp des -engine cryptodev -elapsed + openssl speed -evp des3 -engine cryptodev -elapsed + openssl speed -evp aes128 -engine cryptodev -elapsed + + and multiple threads (10) with: + + openssl speed -evp des -engine cryptodev -elapsed -multi 10 + openssl speed -evp des3 -engine cryptodev -elapsed -multi 10 + openssl speed -evp aes128 -engine cryptodev -elapsed -multi 10 + + for public key testing you can try: + + cryptokeytest + openssl speed -engine cryptodev rsa -elapsed + openssl speed -engine cryptodev dsa -elapsed + +David McCullough +david_mccullough@mcafee.com diff --git a/target/linux/generic-2.4/files/crypto/ocf/c7108/Makefile b/target/linux/generic-2.4/files/crypto/ocf/c7108/Makefile new file mode 100644 index 0000000000..e7e634b2b5 --- /dev/null +++ b/target/linux/generic-2.4/files/crypto/ocf/c7108/Makefile @@ -0,0 +1,12 @@ +# for SGlinux builds +-include $(ROOTDIR)/modules/.config + +obj-$(CONFIG_OCF_C7108) += aes-7108.o + +obj ?= . +EXTRA_CFLAGS += -I$(obj)/.. -I$(obj)/ + +ifdef TOPDIR +-include $(TOPDIR)/Rules.make +endif + diff --git a/target/linux/generic-2.4/files/crypto/ocf/c7108/aes-7108.c b/target/linux/generic-2.4/files/crypto/ocf/c7108/aes-7108.c new file mode 100644 index 0000000000..a5ac054957 --- /dev/null +++ b/target/linux/generic-2.4/files/crypto/ocf/c7108/aes-7108.c @@ -0,0 +1,839 @@ +/* + * Copyright (C) 2006 Micronas USA + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. The name of the author may not be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR + * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES + * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. + * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * Effort sponsored in part by the Defense Advanced Research Projects + * Agency (DARPA) and Air Force Research Laboratory, Air Force + * Materiel Command, USAF, under agreement number F30602-01-2-0537. + * + */ + +//#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +//#include +#include +#include +#include +#include +#include +#include + +/* Runtime mode */ +static int c7108_crypto_mode = C7108_AES_CTRL_MODE_CTR; +//static int c7108_crypto_mode = C7108_AES_CTRL_MODE_CBC; + +static int32_t c7108_id = -1; +static struct cipher_7108 **c7108_sessions = NULL; +static u_int32_t c7108_sesnum = 0; +static unsigned long iobar; + +/* Crypto entry points */ +static int c7108_process(void *, struct cryptop *, int); +static int c7108_newsession(void *, u_int32_t *, struct cryptoini *); +static int c7108_freesession(void *, u_int64_t); + +/* Globals */ +static int debug = 0; +static spinlock_t csr_mutex; + +/* Generic controller-based lock */ +#define AES_LOCK()\ + spin_lock(&csr_mutex) +#define AES_UNLOCK()\ + spin_unlock(&csr_mutex) + +/* 7108 AES register access */ +#define c7108_reg_wr8(a,d) iowrite8(d, (void*)(iobar+(a))) +#define c7108_reg_wr16(a,d) iowrite16(d, (void*)(iobar+(a))) +#define c7108_reg_wr32(a,d) iowrite32(d, (void*)(iobar+(a))) +#define c7108_reg_rd8(a) ioread8((void*)(iobar+(a))) +#define c7108_reg_rd16(a) ioread16((void*)(iobar+(a))) +#define c7108_reg_rd32(a) ioread32((void*)(iobar+(a))) + +static int +c7108_xlate_key(int klen, u8* k8ptr, u32* k32ptr) +{ + int i, nw=0; + nw = ((klen >= 256) ? 8 : (klen >= 192) ? 6 : 4); + for ( i = 0; i < nw; i++) { + k32ptr[i] = (k8ptr[i+3] << 24) | (k8ptr[i+2] << 16) | + (k8ptr[i+1] << 8) | k8ptr[i]; + + } + return 0; +} + +static int +c7108_cache_key(int klen, u32* k32ptr, u8* k8ptr) +{ + int i, nb=0; + u8* ptr = (u8*)k32ptr; + nb = ((klen >= 256) ? 32 : (klen >= 192) ? 24 : 16); + for ( i = 0; i < nb; i++) + k8ptr[i] = ptr[i]; + return 0; +} + +static int +c7108_aes_setup_dma(u32 src, u32 dst, u32 len) +{ + if (len < 16) { + printk("len < 16\n"); + return -10; + } + if (len % 16) { + printk("len not multiple of 16\n"); + return -11; + } + c7108_reg_wr16(C7108_AES_DMA_SRC0_LO, (u16) src); + c7108_reg_wr16(C7108_AES_DMA_SRC0_HI, (u16)((src & 0xffff0000) >> 16)); + c7108_reg_wr16(C7108_AES_DMA_DST0_LO, (u16) dst); + c7108_reg_wr16(C7108_AES_DMA_DST0_HI, (u16)((dst & 0xffff0000) >> 16)); + c7108_reg_wr16(C7108_AES_DMA_LEN, (u16) ((len / 16) - 1)); + + return 0; +} + +static int +c7108_aes_set_hw_iv(u8 iv[16]) +{ + c7108_reg_wr16(C7108_AES_IV0_LO, (u16) ((iv[1] << 8) | iv[0])); + c7108_reg_wr16(C7108_AES_IV0_HI, (u16) ((iv[3] << 8) | iv[2])); + c7108_reg_wr16(C7108_AES_IV1_LO, (u16) ((iv[5] << 8) | iv[4])); + c7108_reg_wr16(C7108_AES_IV1_HI, (u16) ((iv[7] << 8) | iv[6])); + c7108_reg_wr16(C7108_AES_IV2_LO, (u16) ((iv[9] << 8) | iv[8])); + c7108_reg_wr16(C7108_AES_IV2_HI, (u16) ((iv[11] << 8) | iv[10])); + c7108_reg_wr16(C7108_AES_IV3_LO, (u16) ((iv[13] << 8) | iv[12])); + c7108_reg_wr16(C7108_AES_IV3_HI, (u16) ((iv[15] << 8) | iv[14])); + + return 0; +} + +static void +c7108_aes_read_dkey(u32 * dkey) +{ + dkey[0] = (c7108_reg_rd16(C7108_AES_EKEY0_HI) << 16) | + c7108_reg_rd16(C7108_AES_EKEY0_LO); + dkey[1] = (c7108_reg_rd16(C7108_AES_EKEY1_HI) << 16) | + c7108_reg_rd16(C7108_AES_EKEY1_LO); + dkey[2] = (c7108_reg_rd16(C7108_AES_EKEY2_HI) << 16) | + c7108_reg_rd16(C7108_AES_EKEY2_LO); + dkey[3] = (c7108_reg_rd16(C7108_AES_EKEY3_HI) << 16) | + c7108_reg_rd16(C7108_AES_EKEY3_LO); + dkey[4] = (c7108_reg_rd16(C7108_AES_EKEY4_HI) << 16) | + c7108_reg_rd16(C7108_AES_EKEY4_LO); + dkey[5] = (c7108_reg_rd16(C7108_AES_EKEY5_HI) << 16) | + c7108_reg_rd16(C7108_AES_EKEY5_LO); + dkey[6] = (c7108_reg_rd16(C7108_AES_EKEY6_HI) << 16) | + c7108_reg_rd16(C7108_AES_EKEY6_LO); + dkey[7] = (c7108_reg_rd16(C7108_AES_EKEY7_HI) << 16) | + c7108_reg_rd16(C7108_AES_EKEY7_LO); +} + +static int +c7108_aes_cipher(int op, + u32 dst, + u32 src, + u32 len, + int klen, + u16 mode, + u32 key[8], + u8 iv[16]) +{ + int rv = 0, cnt=0; + u16 ctrl = 0, stat = 0; + + AES_LOCK(); + + /* Setup key length */ + if (klen == 128) { + ctrl |= C7108_AES_KEY_LEN_128; + } else if (klen == 192) { + ctrl |= C7108_AES_KEY_LEN_192; + } else if (klen == 256) { + ctrl |= C7108_AES_KEY_LEN_256; + } else { + AES_UNLOCK(); + return -3; + } + + /* Check opcode */ + if (C7108_AES_ENCRYPT == op) { + ctrl |= C7108_AES_ENCRYPT; + } else if (C7108_AES_DECRYPT == op) { + ctrl |= C7108_AES_DECRYPT; + } else { + AES_UNLOCK(); + return -4; + } + + /* check mode */ + if ( (mode != C7108_AES_CTRL_MODE_CBC) && + (mode != C7108_AES_CTRL_MODE_CFB) && + (mode != C7108_AES_CTRL_MODE_OFB) && + (mode != C7108_AES_CTRL_MODE_CTR) && + (mode != C7108_AES_CTRL_MODE_ECB) ) { + AES_UNLOCK(); + return -5; + } + + /* Now set mode */ + ctrl |= mode; + + /* For CFB, OFB, and CTR, neither backward key + * expansion nor key inversion is required. + */ + if ( (C7108_AES_DECRYPT == op) && + (C7108_AES_CTRL_MODE_CBC == mode || + C7108_AES_CTRL_MODE_ECB == mode ) ){ + + /* Program Key */ + c7108_reg_wr16(C7108_AES_KEY0_LO, (u16) key[4]); + c7108_reg_wr16(C7108_AES_KEY0_HI, (u16) (key[4] >> 16)); + c7108_reg_wr16(C7108_AES_KEY1_LO, (u16) key[5]); + c7108_reg_wr16(C7108_AES_KEY1_HI, (u16) (key[5] >> 16)); + c7108_reg_wr16(C7108_AES_KEY2_LO, (u16) key[6]); + c7108_reg_wr16(C7108_AES_KEY2_HI, (u16) (key[6] >> 16)); + c7108_reg_wr16(C7108_AES_KEY3_LO, (u16) key[7]); + c7108_reg_wr16(C7108_AES_KEY3_HI, (u16) (key[7] >> 16)); + c7108_reg_wr16(C7108_AES_KEY6_LO, (u16) key[2]); + c7108_reg_wr16(C7108_AES_KEY6_HI, (u16) (key[2] >> 16)); + c7108_reg_wr16(C7108_AES_KEY7_LO, (u16) key[3]); + c7108_reg_wr16(C7108_AES_KEY7_HI, (u16) (key[3] >> 16)); + + + if (192 == klen) { + c7108_reg_wr16(C7108_AES_KEY4_LO, (u16) key[7]); + c7108_reg_wr16(C7108_AES_KEY4_HI, (u16) (key[7] >> 16)); + c7108_reg_wr16(C7108_AES_KEY5_LO, (u16) key[7]); + c7108_reg_wr16(C7108_AES_KEY5_HI, (u16) (key[7] >> 16)); + + } else if (256 == klen) { + /* 256 */ + c7108_reg_wr16(C7108_AES_KEY4_LO, (u16) key[0]); + c7108_reg_wr16(C7108_AES_KEY4_HI, (u16) (key[0] >> 16)); + c7108_reg_wr16(C7108_AES_KEY5_LO, (u16) key[1]); + c7108_reg_wr16(C7108_AES_KEY5_HI, (u16) (key[1] >> 16)); + + } + + } else { + /* Program Key */ + c7108_reg_wr16(C7108_AES_KEY0_LO, (u16) key[0]); + c7108_reg_wr16(C7108_AES_KEY0_HI, (u16) (key[0] >> 16)); + c7108_reg_wr16(C7108_AES_KEY1_LO, (u16) key[1]); + c7108_reg_wr16(C7108_AES_KEY1_HI, (u16) (key[1] >> 16)); + c7108_reg_wr16(C7108_AES_KEY2_LO, (u16) key[2]); + c7108_reg_wr16(C7108_AES_KEY2_HI, (u16) (key[2] >> 16)); + c7108_reg_wr16(C7108_AES_KEY3_LO, (u16) key[3]); + c7108_reg_wr16(C7108_AES_KEY3_HI, (u16) (key[3] >> 16)); + c7108_reg_wr16(C7108_AES_KEY4_LO, (u16) key[4]); + c7108_reg_wr16(C7108_AES_KEY4_HI, (u16) (key[4] >> 16)); + c7108_reg_wr16(C7108_AES_KEY5_LO, (u16) key[5]); + c7108_reg_wr16(C7108_AES_KEY5_HI, (u16) (key[5] >> 16)); + c7108_reg_wr16(C7108_AES_KEY6_LO, (u16) key[6]); + c7108_reg_wr16(C7108_AES_KEY6_HI, (u16) (key[6] >> 16)); + c7108_reg_wr16(C7108_AES_KEY7_LO, (u16) key[7]); + c7108_reg_wr16(C7108_AES_KEY7_HI, (u16) (key[7] >> 16)); + + } + + /* Set IV always */ + c7108_aes_set_hw_iv(iv); + + /* Program DMA addresses */ + if ((rv = c7108_aes_setup_dma(src, dst, len)) < 0) { + AES_UNLOCK(); + return rv; + } + + + /* Start AES cipher */ + c7108_reg_wr16(C7108_AES_CTRL, ctrl | C7108_AES_GO); + + //printk("Ctrl: 0x%x\n", ctrl | C7108_AES_GO); + do { + /* TODO: interrupt mode */ + // printk("aes_stat=0x%x\n", stat); + //udelay(100); + } while ((cnt++ < 1000000) && + !((stat=c7108_reg_rd16(C7108_AES_CTRL))&C7108_AES_OP_DONE)); + + + if ((mode == C7108_AES_CTRL_MODE_ECB)|| + (mode == C7108_AES_CTRL_MODE_CBC)) { + /* Save out key when the lock is held ... */ + c7108_aes_read_dkey(key); + } + + AES_UNLOCK(); + return 0; + +} + +/* + * Generate a new crypto device session. + */ +static int +c7108_newsession(void *arg, u_int32_t *sid, struct cryptoini *cri) +{ + struct cipher_7108 **swd; + u_int32_t i; + char *algo; + int mode, xfm_type; + + dprintk("%s()\n", __FUNCTION__); + if (sid == NULL || cri == NULL) { + dprintk("%s,%d - EINVAL\n", __FILE__, __LINE__); + return EINVAL; + } + + if (c7108_sessions) { + for (i = 1; i < c7108_sesnum; i++) + if (c7108_sessions[i] == NULL) + break; + } else + i = 1; /* NB: to silence compiler warning */ + + if (c7108_sessions == NULL || i == c7108_sesnum) { + if (c7108_sessions == NULL) { + i = 1; /* We leave c7108_sessions[0] empty */ + c7108_sesnum = CRYPTO_SW_SESSIONS; + } else + c7108_sesnum *= 2; + + swd = kmalloc(c7108_sesnum * sizeof(struct cipher_7108 *), + GFP_ATOMIC); + if (swd == NULL) { + /* Reset session number */ + if (c7108_sesnum == CRYPTO_SW_SESSIONS) + c7108_sesnum = 0; + else + c7108_sesnum /= 2; + dprintk("%s,%d: ENOBUFS\n", __FILE__, __LINE__); + return ENOBUFS; + } + memset(swd, 0, c7108_sesnum * sizeof(struct cipher_7108 *)); + + /* Copy existing sessions */ + if (c7108_sessions) { + memcpy(swd, c7108_sessions, + (c7108_sesnum / 2) * sizeof(struct cipher_7108 *)); + kfree(c7108_sessions); + } + + c7108_sessions = swd; + + } + + swd = &c7108_sessions[i]; + *sid = i; + + while (cri) { + *swd = (struct cipher_7108 *) + kmalloc(sizeof(struct cipher_7108), GFP_ATOMIC); + if (*swd == NULL) { + c7108_freesession(NULL, i); + dprintk("%s,%d: EINVAL\n", __FILE__, __LINE__); + return ENOBUFS; + } + memset(*swd, 0, sizeof(struct cipher_7108)); + + algo = NULL; + mode = 0; + xfm_type = HW_TYPE_CIPHER; + + switch (cri->cri_alg) { + + case CRYPTO_AES_CBC: + algo = "aes"; + mode = CRYPTO_TFM_MODE_CBC; + c7108_crypto_mode = C7108_AES_CTRL_MODE_CBC; + break; +#if 0 + case CRYPTO_AES_CTR: + algo = "aes_ctr"; + mode = CRYPTO_TFM_MODE_CBC; + c7108_crypto_mode = C7108_AES_CTRL_MODE_CTR; + break; + case CRYPTO_AES_ECB: + algo = "aes_ecb"; + mode = CRYPTO_TFM_MODE_CBC; + c7108_crypto_mode = C7108_AES_CTRL_MODE_ECB; + break; + case CRYPTO_AES_OFB: + algo = "aes_ofb"; + mode = CRYPTO_TFM_MODE_CBC; + c7108_crypto_mode = C7108_AES_CTRL_MODE_OFB; + break; + case CRYPTO_AES_CFB: + algo = "aes_cfb"; + mode = CRYPTO_TFM_MODE_CBC; + c7108_crypto_mode = C7108_AES_CTRL_MODE_CFB; + break; +#endif + default: + printk("unsupported crypto algorithm: %d\n", + cri->cri_alg); + return -EINVAL; + break; + } + + + if (!algo || !*algo) { + printk("cypher_7108_crypto: Unknown algo 0x%x\n", + cri->cri_alg); + c7108_freesession(NULL, i); + return EINVAL; + } + + if (xfm_type == HW_TYPE_CIPHER) { + if (debug) { + dprintk("%s key:", __FUNCTION__); + for (i = 0; i < (cri->cri_klen + 7) / 8; i++) + dprintk("%s0x%02x", (i % 8) ? " " : "\n ", + cri->cri_key[i]); + dprintk("\n"); + } + + } else if (xfm_type == SW_TYPE_HMAC || + xfm_type == SW_TYPE_HASH) { + printk("cypher_7108_crypto: HMAC unsupported!\n"); + return -EINVAL; + c7108_freesession(NULL, i); + } else { + printk("cypher_7108_crypto: " + "Unhandled xfm_type %d\n", xfm_type); + c7108_freesession(NULL, i); + return EINVAL; + } + + (*swd)->cri_alg = cri->cri_alg; + (*swd)->xfm_type = xfm_type; + + cri = cri->cri_next; + swd = &((*swd)->next); + } + return 0; +} + +/* + * Free a session. + */ +static int +c7108_freesession(void *arg, u_int64_t tid) +{ + struct cipher_7108 *swd; + u_int32_t sid = CRYPTO_SESID2LID(tid); + + dprintk("%s()\n", __FUNCTION__); + if (sid > c7108_sesnum || c7108_sessions == NULL || + c7108_sessions[sid] == NULL) { + dprintk("%s,%d: EINVAL\n", __FILE__, __LINE__); + return(EINVAL); + } + + /* Silently accept and return */ + if (sid == 0) + return(0); + + while ((swd = c7108_sessions[sid]) != NULL) { + c7108_sessions[sid] = swd->next; + kfree(swd); + } + return 0; +} + +/* + * Process a hardware request. + */ +static int +c7108_process(void *arg, struct cryptop *crp, int hint) +{ + struct cryptodesc *crd; + struct cipher_7108 *sw; + u_int32_t lid; + int type; + u32 hwkey[8]; + +#define SCATTERLIST_MAX 16 + struct scatterlist sg[SCATTERLIST_MAX]; + int sg_num, sg_len, skip; + struct sk_buff *skb = NULL; + struct uio *uiop = NULL; + + dprintk("%s()\n", __FUNCTION__); + /* Sanity check */ + if (crp == NULL) { + dprintk("%s,%d: EINVAL\n", __FILE__, __LINE__); + return EINVAL; + } + + crp->crp_etype = 0; + + if (crp->crp_desc == NULL || crp->crp_buf == NULL) { + dprintk("%s,%d: EINVAL\n", __FILE__, __LINE__); + crp->crp_etype = EINVAL; + goto done; + } + + lid = crp->crp_sid & 0xffffffff; + if (lid >= c7108_sesnum || lid == 0 || c7108_sessions == NULL || + c7108_sessions[lid] == NULL) { + crp->crp_etype = ENOENT; + dprintk("%s,%d: ENOENT\n", __FILE__, __LINE__); + goto done; + } + + /* + * do some error checking outside of the loop for SKB and IOV + * processing this leaves us with valid skb or uiop pointers + * for later + */ + if (crp->crp_flags & CRYPTO_F_SKBUF) { + skb = (struct sk_buff *) crp->crp_buf; + if (skb_shinfo(skb)->nr_frags >= SCATTERLIST_MAX) { + printk("%s,%d: %d nr_frags > SCATTERLIST_MAX", + __FILE__, __LINE__, + skb_shinfo(skb)->nr_frags); + goto done; + } + } else if (crp->crp_flags & CRYPTO_F_IOV) { + uiop = (struct uio *) crp->crp_buf; + if (uiop->uio_iovcnt > SCATTERLIST_MAX) { + printk("%s,%d: %d uio_iovcnt > SCATTERLIST_MAX", + __FILE__, __LINE__, + uiop->uio_iovcnt); + goto done; + } + } + + /* Go through crypto descriptors, processing as we go */ + for (crd = crp->crp_desc; crd; crd = crd->crd_next) { + /* + * Find the crypto context. + * + * XXX Note that the logic here prevents us from having + * XXX the same algorithm multiple times in a session + * XXX (or rather, we can but it won't give us the right + * XXX results). To do that, we'd need some way of differentiating + * XXX between the various instances of an algorithm (so we can + * XXX locate the correct crypto context). + */ + for (sw = c7108_sessions[lid]; + sw && sw->cri_alg != crd->crd_alg; + sw = sw->next) + ; + + /* No such context ? */ + if (sw == NULL) { + crp->crp_etype = EINVAL; + dprintk("%s,%d: EINVAL\n", __FILE__, __LINE__); + goto done; + } + + skip = crd->crd_skip; + + /* + * setup the SG list skip from the start of the buffer + */ + memset(sg, 0, sizeof(sg)); + if (crp->crp_flags & CRYPTO_F_SKBUF) { + int i, len; + type = CRYPTO_BUF_SKBUF; + + sg_num = 0; + sg_len = 0; + + if (skip < skb_headlen(skb)) { + //sg[sg_num].page = virt_to_page(skb->data + skip); + //sg[sg_num].offset = offset_in_page(skb->data + skip); + len = skb_headlen(skb) - skip; + if (len + sg_len > crd->crd_len) + len = crd->crd_len - sg_len; + //sg[sg_num].length = len; + sg_set_page(&sg[sg_num], virt_to_page(skb->data + skip), len, offset_in_page(skb->data + skip)); + sg_len += sg[sg_num].length; + sg_num++; + skip = 0; + } else + skip -= skb_headlen(skb); + + for (i = 0; sg_len < crd->crd_len && + i < skb_shinfo(skb)->nr_frags && + sg_num < SCATTERLIST_MAX; i++) { + if (skip < skb_shinfo(skb)->frags[i].size) { + //sg[sg_num].page = skb_shinfo(skb)->frags[i].page; + //sg[sg_num].offset = skb_shinfo(skb)->frags[i].page_offset + skip; + len = skb_shinfo(skb)->frags[i].size - skip; + if (len + sg_len > crd->crd_len) + len = crd->crd_len - sg_len; + //sg[sg_num].length = len; + sg_set_page(&sg[sg_num], skb_shinfo(skb)->frags[i].page, len, skb_shinfo(skb)->frags[i].page_offset + skip); + sg_len += sg[sg_num].length; + sg_num++; + skip = 0; + } else + skip -= skb_shinfo(skb)->frags[i].size; + } + } else if (crp->crp_flags & CRYPTO_F_IOV) { + int len; + type = CRYPTO_BUF_IOV; + sg_len = 0; + for (sg_num = 0; sg_len < crd->crd_len && + sg_num < uiop->uio_iovcnt && + sg_num < SCATTERLIST_MAX; sg_num++) { + if (skip < uiop->uio_iov[sg_num].iov_len) { + //sg[sg_num].page = virt_to_page(uiop->uio_iov[sg_num].iov_base+skip); + //sg[sg_num].offset = offset_in_page(uiop->uio_iov[sg_num].iov_base+skip); + len = uiop->uio_iov[sg_num].iov_len - skip; + if (len + sg_len > crd->crd_len) + len = crd->crd_len - sg_len; + //sg[sg_num].length = len; + sg_set_page(&sg[sg_num], virt_to_page(uiop->uio_iov[sg_num].iov_base+skip), len, offset_in_page(uiop->uio_iov[sg_num].iov_base+skip)); + sg_len += sg[sg_num].length; + skip = 0; + } else + skip -= uiop->uio_iov[sg_num].iov_len; + } + } else { + type = CRYPTO_BUF_CONTIG; + //sg[0].page = virt_to_page(crp->crp_buf + skip); + //sg[0].offset = offset_in_page(crp->crp_buf + skip); + sg_len = (crp->crp_ilen - skip); + if (sg_len > crd->crd_len) + sg_len = crd->crd_len; + //sg[0].length = sg_len; + sg_set_page(&sg[0], virt_to_page(crp->crp_buf + skip), sg_len, offset_in_page(crp->crp_buf + skip)); + sg_num = 1; + } + + + switch (sw->xfm_type) { + + case HW_TYPE_CIPHER: { + + unsigned char iv[64]; + unsigned char *ivp = iv; + int i; + int ivsize = 16; /* fixed for AES */ + int blocksize = 16; /* fixed for AES */ + + if (sg_len < blocksize) { + crp->crp_etype = EINVAL; + dprintk("%s,%d: EINVAL len %d < %d\n", + __FILE__, __LINE__, + sg_len, + blocksize); + goto done; + } + + if (ivsize > sizeof(iv)) { + crp->crp_etype = EINVAL; + dprintk("%s,%d: EINVAL\n", __FILE__, __LINE__); + goto done; + } + + if (crd->crd_flags & CRD_F_ENCRYPT) { /* encrypt */ + + if (crd->crd_flags & CRD_F_IV_EXPLICIT) { + ivp = crd->crd_iv; + } else { + get_random_bytes(ivp, ivsize); + } + /* + * do we have to copy the IV back to the buffer ? + */ + if ((crd->crd_flags & CRD_F_IV_PRESENT) == 0) { + crypto_copyback(crp->crp_buf, + crd->crd_inject, + ivsize, + (caddr_t)ivp); + } + + c7108_xlate_key(crd->crd_klen, + (u8*)crd->crd_key, (u32*)hwkey); + + /* Encrypt SG list */ + for (i = 0; i < sg_num; i++) { + sg[i].dma_address = + dma_map_single(NULL, + kmap(sg_page(&sg[i])) + sg[i].offset, sg_len, DMA_BIDIRECTIONAL); +#if 0 + printk("sg[%d]:0x%08x, off 0x%08x " + "kmap 0x%08x phys 0x%08x\n", + i, sg[i].page, sg[i].offset, + kmap(sg[i].page) + sg[i].offset, + sg[i].dma_address); +#endif + c7108_aes_cipher(C7108_AES_ENCRYPT, + sg[i].dma_address, + sg[i].dma_address, + sg_len, + crd->crd_klen, + c7108_crypto_mode, + hwkey, + ivp); + + if ((c7108_crypto_mode == C7108_AES_CTRL_MODE_CBC)|| + (c7108_crypto_mode == C7108_AES_CTRL_MODE_ECB)) { + /* Read back expanded key and cache it in key + * context. + * NOTE: for ECB/CBC modes only (not CTR, CFB, OFB) + * where you set the key once. + */ + c7108_cache_key(crd->crd_klen, + (u32*)hwkey, (u8*)crd->crd_key); +#if 0 + printk("%s expanded key:", __FUNCTION__); + for (i = 0; i < (crd->crd_klen + 7) / 8; i++) + printk("%s0x%02x", (i % 8) ? " " : "\n ", + crd->crd_key[i]); + printk("\n"); +#endif + } + } + } + else { /*decrypt */ + + if (crd->crd_flags & CRD_F_IV_EXPLICIT) { + ivp = crd->crd_iv; + } else { + crypto_copydata(crp->crp_buf, crd->crd_inject, + ivsize, (caddr_t)ivp); + } + + c7108_xlate_key(crd->crd_klen, + (u8*)crd->crd_key, (u32*)hwkey); + + /* Decrypt SG list */ + for (i = 0; i < sg_num; i++) { + sg[i].dma_address = + dma_map_single(NULL, + kmap(sg_page(&sg[i])) + sg[i].offset, + sg_len, DMA_BIDIRECTIONAL); + +#if 0 + printk("sg[%d]:0x%08x, off 0x%08x " + "kmap 0x%08x phys 0x%08x\n", + i, sg[i].page, sg[i].offset, + kmap(sg[i].page) + sg[i].offset, + sg[i].dma_address); +#endif + c7108_aes_cipher(C7108_AES_DECRYPT, + sg[i].dma_address, + sg[i].dma_address, + sg_len, + crd->crd_klen, + c7108_crypto_mode, + hwkey, + ivp); + } + } + } break; + case SW_TYPE_HMAC: + case SW_TYPE_HASH: + crp->crp_etype = EINVAL; + goto done; + break; + + case SW_TYPE_COMP: + crp->crp_etype = EINVAL; + goto done; + break; + + default: + /* Unknown/unsupported algorithm */ + dprintk("%s,%d: EINVAL\n", __FILE__, __LINE__); + crp->crp_etype = EINVAL; + goto done; + } + } + +done: + crypto_done(crp); + return 0; +} + +static struct { + softc_device_decl sc_dev; +} a7108dev; + +static device_method_t a7108_methods = { +/* crypto device methods */ + DEVMETHOD(cryptodev_newsession, c7108_newsession), + DEVMETHOD(cryptodev_freesession, c7108_freesession), + DEVMETHOD(cryptodev_process, c7108_process), + DEVMETHOD(cryptodev_kprocess, NULL) +}; + +static int +cypher_7108_crypto_init(void) +{ + dprintk("%s(%p)\n", __FUNCTION__, cypher_7108_crypto_init); + + iobar = (unsigned long)ioremap(CCU_AES_REG_BASE, 0x4000); + printk("7108: AES @ 0x%08x (0x%08x phys) %s mode\n", + iobar, CCU_AES_REG_BASE, + c7108_crypto_mode & C7108_AES_CTRL_MODE_CBC ? "CBC" : + c7108_crypto_mode & C7108_AES_CTRL_MODE_ECB ? "ECB" : + c7108_crypto_mode & C7108_AES_CTRL_MODE_CTR ? "CTR" : + c7108_crypto_mode & C7108_AES_CTRL_MODE_CFB ? "CFB" : + c7108_crypto_mode & C7108_AES_CTRL_MODE_OFB ? "OFB" : "???"); + csr_mutex = SPIN_LOCK_UNLOCKED; + + memset(&a7108dev, 0, sizeof(a7108dev)); + softc_device_init(&a7108dev, "aes7108", 0, a7108_methods); + + c7108_id = crypto_get_driverid(softc_get_device(&a7108dev), CRYPTOCAP_F_HARDWARE); + if (c7108_id < 0) + panic("7108: crypto device cannot initialize!"); + +// crypto_register(c7108_id, CRYPTO_AES_CBC, 0, 0, c7108_newsession, c7108_freesession, c7108_process, NULL); + crypto_register(c7108_id, CRYPTO_AES_CBC, 0, 0); + + return(0); +} + +static void +cypher_7108_crypto_exit(void) +{ + dprintk("%s()\n", __FUNCTION__); + crypto_unregister_all(c7108_id); + c7108_id = -1; +} + +module_init(cypher_7108_crypto_init); +module_exit(cypher_7108_crypto_exit); + +MODULE_LICENSE("Dual BSD/GPL"); +MODULE_DESCRIPTION("Cypher 7108 Crypto (OCF module for kernel crypto)"); diff --git a/target/linux/generic-2.4/files/crypto/ocf/c7108/aes-7108.h b/target/linux/generic-2.4/files/crypto/ocf/c7108/aes-7108.h new file mode 100644 index 0000000000..0c7bfcbb83 --- /dev/null +++ b/target/linux/generic-2.4/files/crypto/ocf/c7108/aes-7108.h @@ -0,0 +1,134 @@ +/* + * Copyright (C) 2006 Micronas USA + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. The name of the author may not be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR + * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES + * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. + * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * Effort sponsored in part by the Defense Advanced Research Projects + * Agency (DARPA) and Air Force Research Laboratory, Air Force + * Materiel Command, USAF, under agreement number F30602-01-2-0537. + * + */ + +#ifndef __AES_7108_H__ +#define __AES_7108_H__ + +/* Cypher 7108 AES Controller Hardware */ +#define CCU_REG_BASE 0x1b500000 +#define CCU_AES_REG_BASE (CCU_REG_BASE + 0x100) +#define C7108_AES_KEY0_LO (0x0000) +#define C7108_AES_KEY0_HI (0x0004) +#define C7108_AES_KEY1_LO (0x0008) +#define C7108_AES_KEY1_HI (0x000c) +#define C7108_AES_KEY2_LO (0x0010) +#define C7108_AES_KEY2_HI (0x0014) +#define C7108_AES_KEY3_LO (0x0018) +#define C7108_AES_KEY3_HI (0x001c) +#define C7108_AES_KEY4_LO (0x0020) +#define C7108_AES_KEY4_HI (0x0024) +#define C7108_AES_KEY5_LO (0x0028) +#define C7108_AES_KEY5_HI (0x002c) +#define C7108_AES_KEY6_LO (0x0030) +#define C7108_AES_KEY6_HI (0x0034) +#define C7108_AES_KEY7_LO (0x0038) +#define C7108_AES_KEY7_HI (0x003c) +#define C7108_AES_IV0_LO (0x0040) +#define C7108_AES_IV0_HI (0x0044) +#define C7108_AES_IV1_LO (0x0048) +#define C7108_AES_IV1_HI (0x004c) +#define C7108_AES_IV2_LO (0x0050) +#define C7108_AES_IV2_HI (0x0054) +#define C7108_AES_IV3_LO (0x0058) +#define C7108_AES_IV3_HI (0x005c) + +#define C7108_AES_DMA_SRC0_LO (0x0068) /* Bits 0:15 */ +#define C7108_AES_DMA_SRC0_HI (0x006c) /* Bits 27:16 */ +#define C7108_AES_DMA_DST0_LO (0x0070) /* Bits 0:15 */ +#define C7108_AES_DMA_DST0_HI (0x0074) /* Bits 27:16 */ +#define C7108_AES_DMA_LEN (0x0078) /*Bytes:(Count+1)x16 */ + +/* AES/Copy engine control register */ +#define C7108_AES_CTRL (0x007c) /* AES control */ +#define C7108_AES_CTRL_RS (1<<0) /* Which set of src/dst to use */ + +/* AES Cipher mode, controlled by setting Bits 2:0 */ +#define C7108_AES_CTRL_MODE_CBC 0 +#define C7108_AES_CTRL_MODE_CFB (1<<0) +#define C7108_AES_CTRL_MODE_OFB (1<<1) +#define C7108_AES_CTRL_MODE_CTR ((1<<0)|(1<<1)) +#define C7108_AES_CTRL_MODE_ECB (1<<2) + +/* AES Key length , Bits 5:4 */ +#define C7108_AES_KEY_LEN_128 0 /* 00 */ +#define C7108_AES_KEY_LEN_192 (1<<4) /* 01 */ +#define C7108_AES_KEY_LEN_256 (1<<5) /* 10 */ + +/* AES Operation (crypt/decrypt), Bit 3 */ +#define C7108_AES_DECRYPT (1<<3) /* Clear for encrypt */ +#define C7108_AES_ENCRYPT 0 +#define C7108_AES_INTR (1<<13) /* Set on done trans from 0->1*/ +#define C7108_AES_GO (1<<14) /* Run */ +#define C7108_AES_OP_DONE (1<<15) /* Set when complete */ + + +/* Expanded key registers */ +#define C7108_AES_EKEY0_LO (0x0080) +#define C7108_AES_EKEY0_HI (0x0084) +#define C7108_AES_EKEY1_LO (0x0088) +#define C7108_AES_EKEY1_HI (0x008c) +#define C7108_AES_EKEY2_LO (0x0090) +#define C7108_AES_EKEY2_HI (0x0094) +#define C7108_AES_EKEY3_LO (0x0098) +#define C7108_AES_EKEY3_HI (0x009c) +#define C7108_AES_EKEY4_LO (0x00a0) +#define C7108_AES_EKEY4_HI (0x00a4) +#define C7108_AES_EKEY5_LO (0x00a8) +#define C7108_AES_EKEY5_HI (0x00ac) +#define C7108_AES_EKEY6_LO (0x00b0) +#define C7108_AES_EKEY6_HI (0x00b4) +#define C7108_AES_EKEY7_LO (0x00b8) +#define C7108_AES_EKEY7_HI (0x00bc) +#define C7108_AES_OK (0x00fc) /* Reset: "OK" */ + +#define offset_in_page(p) ((unsigned long)(p) & ~PAGE_MASK) + +/* Software session entry */ + +#define HW_TYPE_CIPHER 0 +#define SW_TYPE_HMAC 1 +#define SW_TYPE_AUTH2 2 +#define SW_TYPE_HASH 3 +#define SW_TYPE_COMP 4 + +struct cipher_7108 { + int xfm_type; + int cri_alg; + union { + struct { + char sw_key[HMAC_BLOCK_LEN]; + int sw_klen; + int sw_authlen; + } hmac; + } u; + struct cipher_7108 *next; +}; + + + +#endif /* __C7108_AES_7108_H__ */ diff --git a/target/linux/generic-2.4/files/crypto/ocf/criov.c b/target/linux/generic-2.4/files/crypto/ocf/criov.c new file mode 100644 index 0000000000..6d7d3ad452 --- /dev/null +++ b/target/linux/generic-2.4/files/crypto/ocf/criov.c @@ -0,0 +1,215 @@ +/* $OpenBSD: criov.c,v 1.9 2002/01/29 15:48:29 jason Exp $ */ + +/* + * Linux port done by David McCullough + * Copyright (C) 2006-2010 David McCullough + * Copyright (C) 2004-2005 Intel Corporation. + * The license and original author are listed below. + * + * Copyright (c) 1999 Theo de Raadt + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. The name of the author may not be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR + * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES + * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. + * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * +__FBSDID("$FreeBSD: src/sys/opencrypto/criov.c,v 1.5 2006/06/04 22:15:13 pjd Exp $"); + */ + +#ifndef AUTOCONF_INCLUDED +#include +#endif +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include + +/* + * This macro is only for avoiding code duplication, as we need to skip + * given number of bytes in the same way in three functions below. + */ +#define CUIO_SKIP() do { \ + KASSERT(off >= 0, ("%s: off %d < 0", __func__, off)); \ + KASSERT(len >= 0, ("%s: len %d < 0", __func__, len)); \ + while (off > 0) { \ + KASSERT(iol >= 0, ("%s: empty in skip", __func__)); \ + if (off < iov->iov_len) \ + break; \ + off -= iov->iov_len; \ + iol--; \ + iov++; \ + } \ +} while (0) + +void +cuio_copydata(struct uio* uio, int off, int len, caddr_t cp) +{ + struct iovec *iov = uio->uio_iov; + int iol = uio->uio_iovcnt; + unsigned count; + + CUIO_SKIP(); + while (len > 0) { + KASSERT(iol >= 0, ("%s: empty", __func__)); + count = min((int)(iov->iov_len - off), len); + memcpy(cp, ((caddr_t)iov->iov_base) + off, count); + len -= count; + cp += count; + off = 0; + iol--; + iov++; + } +} + +void +cuio_copyback(struct uio* uio, int off, int len, caddr_t cp) +{ + struct iovec *iov = uio->uio_iov; + int iol = uio->uio_iovcnt; + unsigned count; + + CUIO_SKIP(); + while (len > 0) { + KASSERT(iol >= 0, ("%s: empty", __func__)); + count = min((int)(iov->iov_len - off), len); + memcpy(((caddr_t)iov->iov_base) + off, cp, count); + len -= count; + cp += count; + off = 0; + iol--; + iov++; + } +} + +/* + * Return a pointer to iov/offset of location in iovec list. + */ +struct iovec * +cuio_getptr(struct uio *uio, int loc, int *off) +{ + struct iovec *iov = uio->uio_iov; + int iol = uio->uio_iovcnt; + + while (loc >= 0) { + /* Normal end of search */ + if (loc < iov->iov_len) { + *off = loc; + return (iov); + } + + loc -= iov->iov_len; + if (iol == 0) { + if (loc == 0) { + /* Point at the end of valid data */ + *off = iov->iov_len; + return (iov); + } else + return (NULL); + } else { + iov++, iol--; + } + } + + return (NULL); +} + +EXPORT_SYMBOL(cuio_copyback); +EXPORT_SYMBOL(cuio_copydata); +EXPORT_SYMBOL(cuio_getptr); + + +static void +skb_copy_bits_back(struct sk_buff *skb, int offset, caddr_t cp, int len) +{ + int i; + if (offset < skb_headlen(skb)) { + memcpy(skb->data + offset, cp, min_t(int, skb_headlen(skb), len)); + len -= skb_headlen(skb); + cp += skb_headlen(skb); + } + offset -= skb_headlen(skb); + for (i = 0; len > 0 && i < skb_shinfo(skb)->nr_frags; i++) { + if (offset < skb_shinfo(skb)->frags[i].size) { + memcpy(page_address(skb_shinfo(skb)->frags[i].page) + + skb_shinfo(skb)->frags[i].page_offset, + cp, min_t(int, skb_shinfo(skb)->frags[i].size, len)); + len -= skb_shinfo(skb)->frags[i].size; + cp += skb_shinfo(skb)->frags[i].size; + } + offset -= skb_shinfo(skb)->frags[i].size; + } +} + +void +crypto_copyback(int flags, caddr_t buf, int off, int size, caddr_t in) +{ + + if ((flags & CRYPTO_F_SKBUF) != 0) + skb_copy_bits_back((struct sk_buff *)buf, off, in, size); + else if ((flags & CRYPTO_F_IOV) != 0) + cuio_copyback((struct uio *)buf, off, size, in); + else + bcopy(in, buf + off, size); +} + +void +crypto_copydata(int flags, caddr_t buf, int off, int size, caddr_t out) +{ + + if ((flags & CRYPTO_F_SKBUF) != 0) + skb_copy_bits((struct sk_buff *)buf, off, out, size); + else if ((flags & CRYPTO_F_IOV) != 0) + cuio_copydata((struct uio *)buf, off, size, out); + else + bcopy(buf + off, out, size); +} + +int +crypto_apply(int flags, caddr_t buf, int off, int len, + int (*f)(void *, void *, u_int), void *arg) +{ +#if 0 + int error; + + if ((flags & CRYPTO_F_SKBUF) != 0) + error = XXXXXX((struct mbuf *)buf, off, len, f, arg); + else if ((flags & CRYPTO_F_IOV) != 0) + error = cuio_apply((struct uio *)buf, off, len, f, arg); + else + error = (*f)(arg, buf + off, len); + return (error); +#else + KASSERT(0, ("crypto_apply not implemented!\n")); +#endif + return 0; +} + +EXPORT_SYMBOL(crypto_copyback); +EXPORT_SYMBOL(crypto_copydata); +EXPORT_SYMBOL(crypto_apply); + diff --git a/target/linux/generic-2.4/files/crypto/ocf/crypto.c b/target/linux/generic-2.4/files/crypto/ocf/crypto.c new file mode 100644 index 0000000000..9735f0ce93 --- /dev/null +++ b/target/linux/generic-2.4/files/crypto/ocf/crypto.c @@ -0,0 +1,1784 @@ +/*- + * Linux port done by David McCullough + * Copyright (C) 2006-2010 David McCullough + * Copyright (C) 2004-2005 Intel Corporation. + * The license and original author are listed below. + * + * Redistribution and use in source and binary forms, with or without + * Copyright (c) 2002-2006 Sam Leffler. All rights reserved. + * + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * + * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR + * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES + * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. + * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#if 0 +#include +__FBSDID("$FreeBSD: src/sys/opencrypto/crypto.c,v 1.27 2007/03/21 03:42:51 sam Exp $"); +#endif + +/* + * Cryptographic Subsystem. + * + * This code is derived from the Openbsd Cryptographic Framework (OCF) + * that has the copyright shown below. Very little of the original + * code remains. + */ +/*- + * The author of this code is Angelos D. Keromytis (angelos@cis.upenn.edu) + * + * This code was written by Angelos D. Keromytis in Athens, Greece, in + * February 2000. Network Security Technologies Inc. (NSTI) kindly + * supported the development of this code. + * + * Copyright (c) 2000, 2001 Angelos D. Keromytis + * + * Permission to use, copy, and modify this software with or without fee + * is hereby granted, provided that this entire notice is included in + * all source code copies of any software which is or includes a copy or + * modification of this software. + * + * THIS SOFTWARE IS BEING PROVIDED "AS IS", WITHOUT ANY EXPRESS OR + * IMPLIED WARRANTY. IN PARTICULAR, NONE OF THE AUTHORS MAKES ANY + * REPRESENTATION OR WARRANTY OF ANY KIND CONCERNING THE + * MERCHANTABILITY OF THIS SOFTWARE OR ITS FITNESS FOR ANY PARTICULAR + * PURPOSE. + * +__FBSDID("$FreeBSD: src/sys/opencrypto/crypto.c,v 1.16 2005/01/07 02:29:16 imp Exp $"); + */ + + +#ifndef AUTOCONF_INCLUDED +#include +#endif +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/* + * keep track of whether or not we have been initialised, a big + * issue if we are linked into the kernel and a driver gets started before + * us + */ +static int crypto_initted = 0; + +/* + * Crypto drivers register themselves by allocating a slot in the + * crypto_drivers table with crypto_get_driverid() and then registering + * each algorithm they support with crypto_register() and crypto_kregister(). + */ + +/* + * lock on driver table + * we track its state as spin_is_locked does not do anything on non-SMP boxes + */ +static spinlock_t crypto_drivers_lock; +static int crypto_drivers_locked; /* for non-SMP boxes */ + +#define CRYPTO_DRIVER_LOCK() \ + ({ \ + spin_lock_irqsave(&crypto_drivers_lock, d_flags); \ + crypto_drivers_locked = 1; \ + dprintk("%s,%d: DRIVER_LOCK()\n", __FILE__, __LINE__); \ + }) +#define CRYPTO_DRIVER_UNLOCK() \ + ({ \ + dprintk("%s,%d: DRIVER_UNLOCK()\n", __FILE__, __LINE__); \ + crypto_drivers_locked = 0; \ + spin_unlock_irqrestore(&crypto_drivers_lock, d_flags); \ + }) +#define CRYPTO_DRIVER_ASSERT() \ + ({ \ + if (!crypto_drivers_locked) { \ + dprintk("%s,%d: DRIVER_ASSERT!\n", __FILE__, __LINE__); \ + } \ + }) + +/* + * Crypto device/driver capabilities structure. + * + * Synchronization: + * (d) - protected by CRYPTO_DRIVER_LOCK() + * (q) - protected by CRYPTO_Q_LOCK() + * Not tagged fields are read-only. + */ +struct cryptocap { + device_t cc_dev; /* (d) device/driver */ + u_int32_t cc_sessions; /* (d) # of sessions */ + u_int32_t cc_koperations; /* (d) # os asym operations */ + /* + * Largest possible operator length (in bits) for each type of + * encryption algorithm. XXX not used + */ + u_int16_t cc_max_op_len[CRYPTO_ALGORITHM_MAX + 1]; + u_int8_t cc_alg[CRYPTO_ALGORITHM_MAX + 1]; + u_int8_t cc_kalg[CRK_ALGORITHM_MAX + 1]; + + int cc_flags; /* (d) flags */ +#define CRYPTOCAP_F_CLEANUP 0x80000000 /* needs resource cleanup */ + int cc_qblocked; /* (q) symmetric q blocked */ + int cc_kqblocked; /* (q) asymmetric q blocked */ + + int cc_unqblocked; /* (q) symmetric q blocked */ + int cc_unkqblocked; /* (q) asymmetric q blocked */ +}; +static struct cryptocap *crypto_drivers = NULL; +static int crypto_drivers_num = 0; + +/* + * There are two queues for crypto requests; one for symmetric (e.g. + * cipher) operations and one for asymmetric (e.g. MOD)operations. + * A single mutex is used to lock access to both queues. We could + * have one per-queue but having one simplifies handling of block/unblock + * operations. + */ +static int crp_sleep = 0; +static LIST_HEAD(crp_q); /* request queues */ +static LIST_HEAD(crp_kq); + +static spinlock_t crypto_q_lock; + +int crypto_all_qblocked = 0; /* protect with Q_LOCK */ +module_param(crypto_all_qblocked, int, 0444); +MODULE_PARM_DESC(crypto_all_qblocked, "Are all crypto queues blocked"); + +int crypto_all_kqblocked = 0; /* protect with Q_LOCK */ +module_param(crypto_all_kqblocked, int, 0444); +MODULE_PARM_DESC(crypto_all_kqblocked, "Are all asym crypto queues blocked"); + +#define CRYPTO_Q_LOCK() \ + ({ \ + spin_lock_irqsave(&crypto_q_lock, q_flags); \ + dprintk("%s,%d: Q_LOCK()\n", __FILE__, __LINE__); \ + }) +#define CRYPTO_Q_UNLOCK() \ + ({ \ + dprintk("%s,%d: Q_UNLOCK()\n", __FILE__, __LINE__); \ + spin_unlock_irqrestore(&crypto_q_lock, q_flags); \ + }) + +/* + * There are two queues for processing completed crypto requests; one + * for the symmetric and one for the asymmetric ops. We only need one + * but have two to avoid type futzing (cryptop vs. cryptkop). A single + * mutex is used to lock access to both queues. Note that this lock + * must be separate from the lock on request queues to insure driver + * callbacks don't generate lock order reversals. + */ +static LIST_HEAD(crp_ret_q); /* callback queues */ +static LIST_HEAD(crp_ret_kq); + +static spinlock_t crypto_ret_q_lock; +#define CRYPTO_RETQ_LOCK() \ + ({ \ + spin_lock_irqsave(&crypto_ret_q_lock, r_flags); \ + dprintk("%s,%d: RETQ_LOCK\n", __FILE__, __LINE__); \ + }) +#define CRYPTO_RETQ_UNLOCK() \ + ({ \ + dprintk("%s,%d: RETQ_UNLOCK\n", __FILE__, __LINE__); \ + spin_unlock_irqrestore(&crypto_ret_q_lock, r_flags); \ + }) +#define CRYPTO_RETQ_EMPTY() (list_empty(&crp_ret_q) && list_empty(&crp_ret_kq)) + +#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,20) +static kmem_cache_t *cryptop_zone; +static kmem_cache_t *cryptodesc_zone; +#else +static struct kmem_cache *cryptop_zone; +static struct kmem_cache *cryptodesc_zone; +#endif + +#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,27) +#include +#define kill_proc(p,s,v) send_sig(s,find_task_by_vpid(p),0) +#endif + +#define debug crypto_debug +int crypto_debug = 0; +module_param(crypto_debug, int, 0644); +MODULE_PARM_DESC(crypto_debug, "Enable debug"); +EXPORT_SYMBOL(crypto_debug); + +/* + * Maximum number of outstanding crypto requests before we start + * failing requests. We need this to prevent DOS when too many + * requests are arriving for us to keep up. Otherwise we will + * run the system out of memory. Since crypto is slow, we are + * usually the bottleneck that needs to say, enough is enough. + * + * We cannot print errors when this condition occurs, we are already too + * slow, printing anything will just kill us + */ + +static int crypto_q_cnt = 0; +module_param(crypto_q_cnt, int, 0444); +MODULE_PARM_DESC(crypto_q_cnt, + "Current number of outstanding crypto requests"); + +static int crypto_q_max = 1000; +module_param(crypto_q_max, int, 0644); +MODULE_PARM_DESC(crypto_q_max, + "Maximum number of outstanding crypto requests"); + +#define bootverbose crypto_verbose +static int crypto_verbose = 0; +module_param(crypto_verbose, int, 0644); +MODULE_PARM_DESC(crypto_verbose, + "Enable verbose crypto startup"); + +int crypto_usercrypto = 1; /* userland may do crypto reqs */ +module_param(crypto_usercrypto, int, 0644); +MODULE_PARM_DESC(crypto_usercrypto, + "Enable/disable user-mode access to crypto support"); + +int crypto_userasymcrypto = 1; /* userland may do asym crypto reqs */ +module_param(crypto_userasymcrypto, int, 0644); +MODULE_PARM_DESC(crypto_userasymcrypto, + "Enable/disable user-mode access to asymmetric crypto support"); + +int crypto_devallowsoft = 0; /* only use hardware crypto */ +module_param(crypto_devallowsoft, int, 0644); +MODULE_PARM_DESC(crypto_devallowsoft, + "Enable/disable use of software crypto support"); + +/* + * This parameter controls the maximum number of crypto operations to + * do consecutively in the crypto kernel thread before scheduling to allow + * other processes to run. Without it, it is possible to get into a + * situation where the crypto thread never allows any other processes to run. + * Default to 1000 which should be less than one second. + */ +static int crypto_max_loopcount = 1000; +module_param(crypto_max_loopcount, int, 0644); +MODULE_PARM_DESC(crypto_max_loopcount, + "Maximum number of crypto ops to do before yielding to other processes"); + +static pid_t cryptoproc = (pid_t) -1; +static struct completion cryptoproc_exited; +static DECLARE_WAIT_QUEUE_HEAD(cryptoproc_wait); +static pid_t cryptoretproc = (pid_t) -1; +static struct completion cryptoretproc_exited; +static DECLARE_WAIT_QUEUE_HEAD(cryptoretproc_wait); + +static int crypto_proc(void *arg); +static int crypto_ret_proc(void *arg); +static int crypto_invoke(struct cryptocap *cap, struct cryptop *crp, int hint); +static int crypto_kinvoke(struct cryptkop *krp, int flags); +static void crypto_exit(void); +static int crypto_init(void); + +static struct cryptostats cryptostats; + +static struct cryptocap * +crypto_checkdriver(u_int32_t hid) +{ + if (crypto_drivers == NULL) + return NULL; + return (hid >= crypto_drivers_num ? NULL : &crypto_drivers[hid]); +} + +/* + * Compare a driver's list of supported algorithms against another + * list; return non-zero if all algorithms are supported. + */ +static int +driver_suitable(const struct cryptocap *cap, const struct cryptoini *cri) +{ + const struct cryptoini *cr; + + /* See if all the algorithms are supported. */ + for (cr = cri; cr; cr = cr->cri_next) + if (cap->cc_alg[cr->cri_alg] == 0) + return 0; + return 1; +} + +/* + * Select a driver for a new session that supports the specified + * algorithms and, optionally, is constrained according to the flags. + * The algorithm we use here is pretty stupid; just use the + * first driver that supports all the algorithms we need. If there + * are multiple drivers we choose the driver with the fewest active + * sessions. We prefer hardware-backed drivers to software ones. + * + * XXX We need more smarts here (in real life too, but that's + * XXX another story altogether). + */ +static struct cryptocap * +crypto_select_driver(const struct cryptoini *cri, int flags) +{ + struct cryptocap *cap, *best; + int match, hid; + + CRYPTO_DRIVER_ASSERT(); + + /* + * Look first for hardware crypto devices if permitted. + */ + if (flags & CRYPTOCAP_F_HARDWARE) + match = CRYPTOCAP_F_HARDWARE; + else + match = CRYPTOCAP_F_SOFTWARE; + best = NULL; +again: + for (hid = 0; hid < crypto_drivers_num; hid++) { + cap = &crypto_drivers[hid]; + /* + * If it's not initialized, is in the process of + * going away, or is not appropriate (hardware + * or software based on match), then skip. + */ + if (cap->cc_dev == NULL || + (cap->cc_flags & CRYPTOCAP_F_CLEANUP) || + (cap->cc_flags & match) == 0) + continue; + + /* verify all the algorithms are supported. */ + if (driver_suitable(cap, cri)) { + if (best == NULL || + cap->cc_sessions < best->cc_sessions) + best = cap; + } + } + if (best != NULL) + return best; + if (match == CRYPTOCAP_F_HARDWARE && (flags & CRYPTOCAP_F_SOFTWARE)) { + /* sort of an Algol 68-style for loop */ + match = CRYPTOCAP_F_SOFTWARE; + goto again; + } + return best; +} + +/* + * Create a new session. The crid argument specifies a crypto + * driver to use or constraints on a driver to select (hardware + * only, software only, either). Whatever driver is selected + * must be capable of the requested crypto algorithms. + */ +int +crypto_newsession(u_int64_t *sid, struct cryptoini *cri, int crid) +{ + struct cryptocap *cap; + u_int32_t hid, lid; + int err; + unsigned long d_flags; + + CRYPTO_DRIVER_LOCK(); + if ((crid & (CRYPTOCAP_F_HARDWARE | CRYPTOCAP_F_SOFTWARE)) == 0) { + /* + * Use specified driver; verify it is capable. + */ + cap = crypto_checkdriver(crid); + if (cap != NULL && !driver_suitable(cap, cri)) + cap = NULL; + } else { + /* + * No requested driver; select based on crid flags. + */ + cap = crypto_select_driver(cri, crid); + /* + * if NULL then can't do everything in one session. + * XXX Fix this. We need to inject a "virtual" session + * XXX layer right about here. + */ + } + if (cap != NULL) { + /* Call the driver initialization routine. */ + hid = cap - crypto_drivers; + lid = hid; /* Pass the driver ID. */ + cap->cc_sessions++; + CRYPTO_DRIVER_UNLOCK(); + err = CRYPTODEV_NEWSESSION(cap->cc_dev, &lid, cri); + CRYPTO_DRIVER_LOCK(); + if (err == 0) { + (*sid) = (cap->cc_flags & 0xff000000) + | (hid & 0x00ffffff); + (*sid) <<= 32; + (*sid) |= (lid & 0xffffffff); + } else + cap->cc_sessions--; + } else + err = EINVAL; + CRYPTO_DRIVER_UNLOCK(); + return err; +} + +static void +crypto_remove(struct cryptocap *cap) +{ + CRYPTO_DRIVER_ASSERT(); + if (cap->cc_sessions == 0 && cap->cc_koperations == 0) + bzero(cap, sizeof(*cap)); +} + +/* + * Delete an existing session (or a reserved session on an unregistered + * driver). + */ +int +crypto_freesession(u_int64_t sid) +{ + struct cryptocap *cap; + u_int32_t hid; + int err = 0; + unsigned long d_flags; + + dprintk("%s()\n", __FUNCTION__); + CRYPTO_DRIVER_LOCK(); + + if (crypto_drivers == NULL) { + err = EINVAL; + goto done; + } + + /* Determine two IDs. */ + hid = CRYPTO_SESID2HID(sid); + + if (hid >= crypto_drivers_num) { + dprintk("%s - INVALID DRIVER NUM %d\n", __FUNCTION__, hid); + err = ENOENT; + goto done; + } + cap = &crypto_drivers[hid]; + + if (cap->cc_dev) { + CRYPTO_DRIVER_UNLOCK(); + /* Call the driver cleanup routine, if available, unlocked. */ + err = CRYPTODEV_FREESESSION(cap->cc_dev, sid); + CRYPTO_DRIVER_LOCK(); + } + + if (cap->cc_sessions) + cap->cc_sessions--; + + if (cap->cc_flags & CRYPTOCAP_F_CLEANUP) + crypto_remove(cap); + +done: + CRYPTO_DRIVER_UNLOCK(); + return err; +} + +/* + * Return an unused driver id. Used by drivers prior to registering + * support for the algorithms they handle. + */ +int32_t +crypto_get_driverid(device_t dev, int flags) +{ + struct cryptocap *newdrv; + int i; + unsigned long d_flags; + + if ((flags & (CRYPTOCAP_F_HARDWARE | CRYPTOCAP_F_SOFTWARE)) == 0) { + printf("%s: no flags specified when registering driver\n", + device_get_nameunit(dev)); + return -1; + } + + CRYPTO_DRIVER_LOCK(); + + for (i = 0; i < crypto_drivers_num; i++) { + if (crypto_drivers[i].cc_dev == NULL && + (crypto_drivers[i].cc_flags & CRYPTOCAP_F_CLEANUP) == 0) { + break; + } + } + + /* Out of entries, allocate some more. */ + if (i == crypto_drivers_num) { + /* Be careful about wrap-around. */ + if (2 * crypto_drivers_num <= crypto_drivers_num) { + CRYPTO_DRIVER_UNLOCK(); + printk("crypto: driver count wraparound!\n"); + return -1; + } + + newdrv = kmalloc(2 * crypto_drivers_num * sizeof(struct cryptocap), + GFP_KERNEL); + if (newdrv == NULL) { + CRYPTO_DRIVER_UNLOCK(); + printk("crypto: no space to expand driver table!\n"); + return -1; + } + + memcpy(newdrv, crypto_drivers, + crypto_drivers_num * sizeof(struct cryptocap)); + memset(&newdrv[crypto_drivers_num], 0, + crypto_drivers_num * sizeof(struct cryptocap)); + + crypto_drivers_num *= 2; + + kfree(crypto_drivers); + crypto_drivers = newdrv; + } + + /* NB: state is zero'd on free */ + crypto_drivers[i].cc_sessions = 1; /* Mark */ + crypto_drivers[i].cc_dev = dev; + crypto_drivers[i].cc_flags = flags; + if (bootverbose) + printf("crypto: assign %s driver id %u, flags %u\n", + device_get_nameunit(dev), i, flags); + + CRYPTO_DRIVER_UNLOCK(); + + return i; +} + +/* + * Lookup a driver by name. We match against the full device + * name and unit, and against just the name. The latter gives + * us a simple widlcarding by device name. On success return the + * driver/hardware identifier; otherwise return -1. + */ +int +crypto_find_driver(const char *match) +{ + int i, len = strlen(match); + unsigned long d_flags; + + CRYPTO_DRIVER_LOCK(); + for (i = 0; i < crypto_drivers_num; i++) { + device_t dev = crypto_drivers[i].cc_dev; + if (dev == NULL || + (crypto_drivers[i].cc_flags & CRYPTOCAP_F_CLEANUP)) + continue; + if (strncmp(match, device_get_nameunit(dev), len) == 0 || + strncmp(match, device_get_name(dev), len) == 0) + break; + } + CRYPTO_DRIVER_UNLOCK(); + return i < crypto_drivers_num ? i : -1; +} + +/* + * Return the device_t for the specified driver or NULL + * if the driver identifier is invalid. + */ +device_t +crypto_find_device_byhid(int hid) +{ + struct cryptocap *cap = crypto_checkdriver(hid); + return cap != NULL ? cap->cc_dev : NULL; +} + +/* + * Return the device/driver capabilities. + */ +int +crypto_getcaps(int hid) +{ + struct cryptocap *cap = crypto_checkdriver(hid); + return cap != NULL ? cap->cc_flags : 0; +} + +/* + * Register support for a key-related algorithm. This routine + * is called once for each algorithm supported a driver. + */ +int +crypto_kregister(u_int32_t driverid, int kalg, u_int32_t flags) +{ + struct cryptocap *cap; + int err; + unsigned long d_flags; + + dprintk("%s()\n", __FUNCTION__); + CRYPTO_DRIVER_LOCK(); + + cap = crypto_checkdriver(driverid); + if (cap != NULL && + (CRK_ALGORITM_MIN <= kalg && kalg <= CRK_ALGORITHM_MAX)) { + /* + * XXX Do some performance testing to determine placing. + * XXX We probably need an auxiliary data structure that + * XXX describes relative performances. + */ + + cap->cc_kalg[kalg] = flags | CRYPTO_ALG_FLAG_SUPPORTED; + if (bootverbose) + printf("crypto: %s registers key alg %u flags %u\n" + , device_get_nameunit(cap->cc_dev) + , kalg + , flags + ); + err = 0; + } else + err = EINVAL; + + CRYPTO_DRIVER_UNLOCK(); + return err; +} + +/* + * Register support for a non-key-related algorithm. This routine + * is called once for each such algorithm supported by a driver. + */ +int +crypto_register(u_int32_t driverid, int alg, u_int16_t maxoplen, + u_int32_t flags) +{ + struct cryptocap *cap; + int err; + unsigned long d_flags; + + dprintk("%s(id=0x%x, alg=%d, maxoplen=%d, flags=0x%x)\n", __FUNCTION__, + driverid, alg, maxoplen, flags); + + CRYPTO_DRIVER_LOCK(); + + cap = crypto_checkdriver(driverid); + /* NB: algorithms are in the range [1..max] */ + if (cap != NULL && + (CRYPTO_ALGORITHM_MIN <= alg && alg <= CRYPTO_ALGORITHM_MAX)) { + /* + * XXX Do some performance testing to determine placing. + * XXX We probably need an auxiliary data structure that + * XXX describes relative performances. + */ + + cap->cc_alg[alg] = flags | CRYPTO_ALG_FLAG_SUPPORTED; + cap->cc_max_op_len[alg] = maxoplen; + if (bootverbose) + printf("crypto: %s registers alg %u flags %u maxoplen %u\n" + , device_get_nameunit(cap->cc_dev) + , alg + , flags + , maxoplen + ); + cap->cc_sessions = 0; /* Unmark */ + err = 0; + } else + err = EINVAL; + + CRYPTO_DRIVER_UNLOCK(); + return err; +} + +static void +driver_finis(struct cryptocap *cap) +{ + u_int32_t ses, kops; + + CRYPTO_DRIVER_ASSERT(); + + ses = cap->cc_sessions; + kops = cap->cc_koperations; + bzero(cap, sizeof(*cap)); + if (ses != 0 || kops != 0) { + /* + * If there are pending sessions, + * just mark as invalid. + */ + cap->cc_flags |= CRYPTOCAP_F_CLEANUP; + cap->cc_sessions = ses; + cap->cc_koperations = kops; + } +} + +/* + * Unregister a crypto driver. If there are pending sessions using it, + * leave enough information around so that subsequent calls using those + * sessions will correctly detect the driver has been unregistered and + * reroute requests. + */ +int +crypto_unregister(u_int32_t driverid, int alg) +{ + struct cryptocap *cap; + int i, err; + unsigned long d_flags; + + dprintk("%s()\n", __FUNCTION__); + CRYPTO_DRIVER_LOCK(); + + cap = crypto_checkdriver(driverid); + if (cap != NULL && + (CRYPTO_ALGORITHM_MIN <= alg && alg <= CRYPTO_ALGORITHM_MAX) && + cap->cc_alg[alg] != 0) { + cap->cc_alg[alg] = 0; + cap->cc_max_op_len[alg] = 0; + + /* Was this the last algorithm ? */ + for (i = 1; i <= CRYPTO_ALGORITHM_MAX; i++) + if (cap->cc_alg[i] != 0) + break; + + if (i == CRYPTO_ALGORITHM_MAX + 1) + driver_finis(cap); + err = 0; + } else + err = EINVAL; + CRYPTO_DRIVER_UNLOCK(); + return err; +} + +/* + * Unregister all algorithms associated with a crypto driver. + * If there are pending sessions using it, leave enough information + * around so that subsequent calls using those sessions will + * correctly detect the driver has been unregistered and reroute + * requests. + */ +int +crypto_unregister_all(u_int32_t driverid) +{ + struct cryptocap *cap; + int err; + unsigned long d_flags; + + dprintk("%s()\n", __FUNCTION__); + CRYPTO_DRIVER_LOCK(); + cap = crypto_checkdriver(driverid); + if (cap != NULL) { + driver_finis(cap); + err = 0; + } else + err = EINVAL; + CRYPTO_DRIVER_UNLOCK(); + + return err; +} + +/* + * Clear blockage on a driver. The what parameter indicates whether + * the driver is now ready for cryptop's and/or cryptokop's. + */ +int +crypto_unblock(u_int32_t driverid, int what) +{ + struct cryptocap *cap; + int err; + unsigned long q_flags; + + CRYPTO_Q_LOCK(); + cap = crypto_checkdriver(driverid); + if (cap != NULL) { + if (what & CRYPTO_SYMQ) { + cap->cc_qblocked = 0; + cap->cc_unqblocked = 0; + crypto_all_qblocked = 0; + } + if (what & CRYPTO_ASYMQ) { + cap->cc_kqblocked = 0; + cap->cc_unkqblocked = 0; + crypto_all_kqblocked = 0; + } + if (crp_sleep) + wake_up_interruptible(&cryptoproc_wait); + err = 0; + } else + err = EINVAL; + CRYPTO_Q_UNLOCK(); //DAVIDM should this be a driver lock + + return err; +} + +/* + * Add a crypto request to a queue, to be processed by the kernel thread. + */ +int +crypto_dispatch(struct cryptop *crp) +{ + struct cryptocap *cap; + int result = -1; + unsigned long q_flags; + + dprintk("%s()\n", __FUNCTION__); + + cryptostats.cs_ops++; + + CRYPTO_Q_LOCK(); + if (crypto_q_cnt >= crypto_q_max) { + CRYPTO_Q_UNLOCK(); + cryptostats.cs_drops++; + return ENOMEM; + } + crypto_q_cnt++; + + /* make sure we are starting a fresh run on this crp. */ + crp->crp_flags &= ~CRYPTO_F_DONE; + crp->crp_etype = 0; + + /* + * Caller marked the request to be processed immediately; dispatch + * it directly to the driver unless the driver is currently blocked. + */ + if ((crp->crp_flags & CRYPTO_F_BATCH) == 0) { + int hid = CRYPTO_SESID2HID(crp->crp_sid); + cap = crypto_checkdriver(hid); + /* Driver cannot disappear when there is an active session. */ + KASSERT(cap != NULL, ("%s: Driver disappeared.", __func__)); + if (!cap->cc_qblocked) { + crypto_all_qblocked = 0; + crypto_drivers[hid].cc_unqblocked = 1; + CRYPTO_Q_UNLOCK(); + result = crypto_invoke(cap, crp, 0); + CRYPTO_Q_LOCK(); + if (result == ERESTART) + if (crypto_drivers[hid].cc_unqblocked) + crypto_drivers[hid].cc_qblocked = 1; + crypto_drivers[hid].cc_unqblocked = 0; + } + } + if (result == ERESTART) { + /* + * The driver ran out of resources, mark the + * driver ``blocked'' for cryptop's and put + * the request back in the queue. It would + * best to put the request back where we got + * it but that's hard so for now we put it + * at the front. This should be ok; putting + * it at the end does not work. + */ + list_add(&crp->crp_next, &crp_q); + cryptostats.cs_blocks++; + result = 0; + } else if (result == -1) { + TAILQ_INSERT_TAIL(&crp_q, crp, crp_next); + result = 0; + } + if (crp_sleep) + wake_up_interruptible(&cryptoproc_wait); + CRYPTO_Q_UNLOCK(); + return result; +} + +/* + * Add an asymetric crypto request to a queue, + * to be processed by the kernel thread. + */ +int +crypto_kdispatch(struct cryptkop *krp) +{ + int error; + unsigned long q_flags; + + cryptostats.cs_kops++; + + error = crypto_kinvoke(krp, krp->krp_crid); + if (error == ERESTART) { + CRYPTO_Q_LOCK(); + TAILQ_INSERT_TAIL(&crp_kq, krp, krp_next); + if (crp_sleep) + wake_up_interruptible(&cryptoproc_wait); + CRYPTO_Q_UNLOCK(); + error = 0; + } + return error; +} + +/* + * Verify a driver is suitable for the specified operation. + */ +static __inline int +kdriver_suitable(const struct cryptocap *cap, const struct cryptkop *krp) +{ + return (cap->cc_kalg[krp->krp_op] & CRYPTO_ALG_FLAG_SUPPORTED) != 0; +} + +/* + * Select a driver for an asym operation. The driver must + * support the necessary algorithm. The caller can constrain + * which device is selected with the flags parameter. The + * algorithm we use here is pretty stupid; just use the first + * driver that supports the algorithms we need. If there are + * multiple suitable drivers we choose the driver with the + * fewest active operations. We prefer hardware-backed + * drivers to software ones when either may be used. + */ +static struct cryptocap * +crypto_select_kdriver(const struct cryptkop *krp, int flags) +{ + struct cryptocap *cap, *best, *blocked; + int match, hid; + + CRYPTO_DRIVER_ASSERT(); + + /* + * Look first for hardware crypto devices if permitted. + */ + if (flags & CRYPTOCAP_F_HARDWARE) + match = CRYPTOCAP_F_HARDWARE; + else + match = CRYPTOCAP_F_SOFTWARE; + best = NULL; + blocked = NULL; +again: + for (hid = 0; hid < crypto_drivers_num; hid++) { + cap = &crypto_drivers[hid]; + /* + * If it's not initialized, is in the process of + * going away, or is not appropriate (hardware + * or software based on match), then skip. + */ + if (cap->cc_dev == NULL || + (cap->cc_flags & CRYPTOCAP_F_CLEANUP) || + (cap->cc_flags & match) == 0) + continue; + + /* verify all the algorithms are supported. */ + if (kdriver_suitable(cap, krp)) { + if (best == NULL || + cap->cc_koperations < best->cc_koperations) + best = cap; + } + } + if (best != NULL) + return best; + if (match == CRYPTOCAP_F_HARDWARE && (flags & CRYPTOCAP_F_SOFTWARE)) { + /* sort of an Algol 68-style for loop */ + match = CRYPTOCAP_F_SOFTWARE; + goto again; + } + return best; +} + +/* + * Dispatch an assymetric crypto request. + */ +static int +crypto_kinvoke(struct cryptkop *krp, int crid) +{ + struct cryptocap *cap = NULL; + int error; + unsigned long d_flags; + + KASSERT(krp != NULL, ("%s: krp == NULL", __func__)); + KASSERT(krp->krp_callback != NULL, + ("%s: krp->crp_callback == NULL", __func__)); + + CRYPTO_DRIVER_LOCK(); + if ((crid & (CRYPTOCAP_F_HARDWARE | CRYPTOCAP_F_SOFTWARE)) == 0) { + cap = crypto_checkdriver(crid); + if (cap != NULL) { + /* + * Driver present, it must support the necessary + * algorithm and, if s/w drivers are excluded, + * it must be registered as hardware-backed. + */ + if (!kdriver_suitable(cap, krp) || + (!crypto_devallowsoft && + (cap->cc_flags & CRYPTOCAP_F_HARDWARE) == 0)) + cap = NULL; + } + } else { + /* + * No requested driver; select based on crid flags. + */ + if (!crypto_devallowsoft) /* NB: disallow s/w drivers */ + crid &= ~CRYPTOCAP_F_SOFTWARE; + cap = crypto_select_kdriver(krp, crid); + } + if (cap != NULL && !cap->cc_kqblocked) { + krp->krp_hid = cap - crypto_drivers; + cap->cc_koperations++; + CRYPTO_DRIVER_UNLOCK(); + error = CRYPTODEV_KPROCESS(cap->cc_dev, krp, 0); + CRYPTO_DRIVER_LOCK(); + if (error == ERESTART) { + cap->cc_koperations--; + CRYPTO_DRIVER_UNLOCK(); + return (error); + } + /* return the actual device used */ + krp->krp_crid = krp->krp_hid; + } else { + /* + * NB: cap is !NULL if device is blocked; in + * that case return ERESTART so the operation + * is resubmitted if possible. + */ + error = (cap == NULL) ? ENODEV : ERESTART; + } + CRYPTO_DRIVER_UNLOCK(); + + if (error) { + krp->krp_status = error; + crypto_kdone(krp); + } + return 0; +} + + +/* + * Dispatch a crypto request to the appropriate crypto devices. + */ +static int +crypto_invoke(struct cryptocap *cap, struct cryptop *crp, int hint) +{ + KASSERT(crp != NULL, ("%s: crp == NULL", __func__)); + KASSERT(crp->crp_callback != NULL, + ("%s: crp->crp_callback == NULL", __func__)); + KASSERT(crp->crp_desc != NULL, ("%s: crp->crp_desc == NULL", __func__)); + + dprintk("%s()\n", __FUNCTION__); + +#ifdef CRYPTO_TIMING + if (crypto_timing) + crypto_tstat(&cryptostats.cs_invoke, &crp->crp_tstamp); +#endif + if (cap->cc_flags & CRYPTOCAP_F_CLEANUP) { + struct cryptodesc *crd; + u_int64_t nid; + + /* + * Driver has unregistered; migrate the session and return + * an error to the caller so they'll resubmit the op. + * + * XXX: What if there are more already queued requests for this + * session? + */ + crypto_freesession(crp->crp_sid); + + for (crd = crp->crp_desc; crd->crd_next; crd = crd->crd_next) + crd->CRD_INI.cri_next = &(crd->crd_next->CRD_INI); + + /* XXX propagate flags from initial session? */ + if (crypto_newsession(&nid, &(crp->crp_desc->CRD_INI), + CRYPTOCAP_F_HARDWARE | CRYPTOCAP_F_SOFTWARE) == 0) + crp->crp_sid = nid; + + crp->crp_etype = EAGAIN; + crypto_done(crp); + return 0; + } else { + /* + * Invoke the driver to process the request. + */ + return CRYPTODEV_PROCESS(cap->cc_dev, crp, hint); + } +} + +/* + * Release a set of crypto descriptors. + */ +void +crypto_freereq(struct cryptop *crp) +{ + struct cryptodesc *crd; + + if (crp == NULL) + return; + +#ifdef DIAGNOSTIC + { + struct cryptop *crp2; + unsigned long q_flags; + + CRYPTO_Q_LOCK(); + TAILQ_FOREACH(crp2, &crp_q, crp_next) { + KASSERT(crp2 != crp, + ("Freeing cryptop from the crypto queue (%p).", + crp)); + } + CRYPTO_Q_UNLOCK(); + CRYPTO_RETQ_LOCK(); + TAILQ_FOREACH(crp2, &crp_ret_q, crp_next) { + KASSERT(crp2 != crp, + ("Freeing cryptop from the return queue (%p).", + crp)); + } + CRYPTO_RETQ_UNLOCK(); + } +#endif + + while ((crd = crp->crp_desc) != NULL) { + crp->crp_desc = crd->crd_next; + kmem_cache_free(cryptodesc_zone, crd); + } + kmem_cache_free(cryptop_zone, crp); +} + +/* + * Acquire a set of crypto descriptors. + */ +struct cryptop * +crypto_getreq(int num) +{ + struct cryptodesc *crd; + struct cryptop *crp; + + crp = kmem_cache_alloc(cryptop_zone, SLAB_ATOMIC); + if (crp != NULL) { + memset(crp, 0, sizeof(*crp)); + INIT_LIST_HEAD(&crp->crp_next); + init_waitqueue_head(&crp->crp_waitq); + while (num--) { + crd = kmem_cache_alloc(cryptodesc_zone, SLAB_ATOMIC); + if (crd == NULL) { + crypto_freereq(crp); + return NULL; + } + memset(crd, 0, sizeof(*crd)); + crd->crd_next = crp->crp_desc; + crp->crp_desc = crd; + } + } + return crp; +} + +/* + * Invoke the callback on behalf of the driver. + */ +void +crypto_done(struct cryptop *crp) +{ + unsigned long q_flags; + + dprintk("%s()\n", __FUNCTION__); + if ((crp->crp_flags & CRYPTO_F_DONE) == 0) { + crp->crp_flags |= CRYPTO_F_DONE; + CRYPTO_Q_LOCK(); + crypto_q_cnt--; + CRYPTO_Q_UNLOCK(); + } else + printk("crypto: crypto_done op already done, flags 0x%x", + crp->crp_flags); + if (crp->crp_etype != 0) + cryptostats.cs_errs++; + /* + * CBIMM means unconditionally do the callback immediately; + * CBIFSYNC means do the callback immediately only if the + * operation was done synchronously. Both are used to avoid + * doing extraneous context switches; the latter is mostly + * used with the software crypto driver. + */ + if ((crp->crp_flags & CRYPTO_F_CBIMM) || + ((crp->crp_flags & CRYPTO_F_CBIFSYNC) && + (CRYPTO_SESID2CAPS(crp->crp_sid) & CRYPTOCAP_F_SYNC))) { + /* + * Do the callback directly. This is ok when the + * callback routine does very little (e.g. the + * /dev/crypto callback method just does a wakeup). + */ + crp->crp_callback(crp); + } else { + unsigned long r_flags; + /* + * Normal case; queue the callback for the thread. + */ + CRYPTO_RETQ_LOCK(); + if (CRYPTO_RETQ_EMPTY()) + wake_up_interruptible(&cryptoretproc_wait);/* shared wait channel */ + TAILQ_INSERT_TAIL(&crp_ret_q, crp, crp_next); + CRYPTO_RETQ_UNLOCK(); + } +} + +/* + * Invoke the callback on behalf of the driver. + */ +void +crypto_kdone(struct cryptkop *krp) +{ + struct cryptocap *cap; + unsigned long d_flags; + + if ((krp->krp_flags & CRYPTO_KF_DONE) != 0) + printk("crypto: crypto_kdone op already done, flags 0x%x", + krp->krp_flags); + krp->krp_flags |= CRYPTO_KF_DONE; + if (krp->krp_status != 0) + cryptostats.cs_kerrs++; + + CRYPTO_DRIVER_LOCK(); + /* XXX: What if driver is loaded in the meantime? */ + if (krp->krp_hid < crypto_drivers_num) { + cap = &crypto_drivers[krp->krp_hid]; + cap->cc_koperations--; + KASSERT(cap->cc_koperations >= 0, ("cc_koperations < 0")); + if (cap->cc_flags & CRYPTOCAP_F_CLEANUP) + crypto_remove(cap); + } + CRYPTO_DRIVER_UNLOCK(); + + /* + * CBIMM means unconditionally do the callback immediately; + * This is used to avoid doing extraneous context switches + */ + if ((krp->krp_flags & CRYPTO_KF_CBIMM)) { + /* + * Do the callback directly. This is ok when the + * callback routine does very little (e.g. the + * /dev/crypto callback method just does a wakeup). + */ + krp->krp_callback(krp); + } else { + unsigned long r_flags; + /* + * Normal case; queue the callback for the thread. + */ + CRYPTO_RETQ_LOCK(); + if (CRYPTO_RETQ_EMPTY()) + wake_up_interruptible(&cryptoretproc_wait);/* shared wait channel */ + TAILQ_INSERT_TAIL(&crp_ret_kq, krp, krp_next); + CRYPTO_RETQ_UNLOCK(); + } +} + +int +crypto_getfeat(int *featp) +{ + int hid, kalg, feat = 0; + unsigned long d_flags; + + CRYPTO_DRIVER_LOCK(); + for (hid = 0; hid < crypto_drivers_num; hid++) { + const struct cryptocap *cap = &crypto_drivers[hid]; + + if ((cap->cc_flags & CRYPTOCAP_F_SOFTWARE) && + !crypto_devallowsoft) { + continue; + } + for (kalg = 0; kalg < CRK_ALGORITHM_MAX; kalg++) + if (cap->cc_kalg[kalg] & CRYPTO_ALG_FLAG_SUPPORTED) + feat |= 1 << kalg; + } + CRYPTO_DRIVER_UNLOCK(); + *featp = feat; + return (0); +} + +/* + * Crypto thread, dispatches crypto requests. + */ +static int +crypto_proc(void *arg) +{ + struct cryptop *crp, *submit; + struct cryptkop *krp, *krpp; + struct cryptocap *cap; + u_int32_t hid; + int result, hint; + unsigned long q_flags; + int loopcount = 0; + + ocf_daemonize("crypto"); + + CRYPTO_Q_LOCK(); + for (;;) { + /* + * we need to make sure we don't get into a busy loop with nothing + * to do, the two crypto_all_*blocked vars help us find out when + * we are all full and can do nothing on any driver or Q. If so we + * wait for an unblock. + */ + crypto_all_qblocked = !list_empty(&crp_q); + + /* + * Find the first element in the queue that can be + * processed and look-ahead to see if multiple ops + * are ready for the same driver. + */ + submit = NULL; + hint = 0; + list_for_each_entry(crp, &crp_q, crp_next) { + hid = CRYPTO_SESID2HID(crp->crp_sid); + cap = crypto_checkdriver(hid); + /* + * Driver cannot disappear when there is an active + * session. + */ + KASSERT(cap != NULL, ("%s:%u Driver disappeared.", + __func__, __LINE__)); + if (cap == NULL || cap->cc_dev == NULL) { + /* Op needs to be migrated, process it. */ + if (submit == NULL) + submit = crp; + break; + } + if (!cap->cc_qblocked) { + if (submit != NULL) { + /* + * We stop on finding another op, + * regardless whether its for the same + * driver or not. We could keep + * searching the queue but it might be + * better to just use a per-driver + * queue instead. + */ + if (CRYPTO_SESID2HID(submit->crp_sid) == hid) + hint = CRYPTO_HINT_MORE; + break; + } else { + submit = crp; + if ((submit->crp_flags & CRYPTO_F_BATCH) == 0) + break; + /* keep scanning for more are q'd */ + } + } + } + if (submit != NULL) { + hid = CRYPTO_SESID2HID(submit->crp_sid); + crypto_all_qblocked = 0; + list_del(&submit->crp_next); + crypto_drivers[hid].cc_unqblocked = 1; + cap = crypto_checkdriver(hid); + CRYPTO_Q_UNLOCK(); + KASSERT(cap != NULL, ("%s:%u Driver disappeared.", + __func__, __LINE__)); + result = crypto_invoke(cap, submit, hint); + CRYPTO_Q_LOCK(); + if (result == ERESTART) { + /* + * The driver ran out of resources, mark the + * driver ``blocked'' for cryptop's and put + * the request back in the queue. It would + * best to put the request back where we got + * it but that's hard so for now we put it + * at the front. This should be ok; putting + * it at the end does not work. + */ + /* XXX validate sid again? */ + list_add(&submit->crp_next, &crp_q); + cryptostats.cs_blocks++; + if (crypto_drivers[hid].cc_unqblocked) + crypto_drivers[hid].cc_qblocked=0; + crypto_drivers[hid].cc_unqblocked=0; + } + crypto_drivers[hid].cc_unqblocked = 0; + } + + crypto_all_kqblocked = !list_empty(&crp_kq); + + /* As above, but for key ops */ + krp = NULL; + list_for_each_entry(krpp, &crp_kq, krp_next) { + cap = crypto_checkdriver(krpp->krp_hid); + if (cap == NULL || cap->cc_dev == NULL) { + /* + * Operation needs to be migrated, invalidate + * the assigned device so it will reselect a + * new one below. Propagate the original + * crid selection flags if supplied. + */ + krp->krp_hid = krp->krp_crid & + (CRYPTOCAP_F_SOFTWARE|CRYPTOCAP_F_HARDWARE); + if (krp->krp_hid == 0) + krp->krp_hid = + CRYPTOCAP_F_SOFTWARE|CRYPTOCAP_F_HARDWARE; + break; + } + if (!cap->cc_kqblocked) { + krp = krpp; + break; + } + } + if (krp != NULL) { + crypto_all_kqblocked = 0; + list_del(&krp->krp_next); + crypto_drivers[krp->krp_hid].cc_kqblocked = 1; + CRYPTO_Q_UNLOCK(); + result = crypto_kinvoke(krp, krp->krp_hid); + CRYPTO_Q_LOCK(); + if (result == ERESTART) { + /* + * The driver ran out of resources, mark the + * driver ``blocked'' for cryptkop's and put + * the request back in the queue. It would + * best to put the request back where we got + * it but that's hard so for now we put it + * at the front. This should be ok; putting + * it at the end does not work. + */ + /* XXX validate sid again? */ + list_add(&krp->krp_next, &crp_kq); + cryptostats.cs_kblocks++; + } else + crypto_drivers[krp->krp_hid].cc_kqblocked = 0; + } + + if (submit == NULL && krp == NULL) { + /* + * Nothing more to be processed. Sleep until we're + * woken because there are more ops to process. + * This happens either by submission or by a driver + * becoming unblocked and notifying us through + * crypto_unblock. Note that when we wakeup we + * start processing each queue again from the + * front. It's not clear that it's important to + * preserve this ordering since ops may finish + * out of order if dispatched to different devices + * and some become blocked while others do not. + */ + dprintk("%s - sleeping (qe=%d qb=%d kqe=%d kqb=%d)\n", + __FUNCTION__, + list_empty(&crp_q), crypto_all_qblocked, + list_empty(&crp_kq), crypto_all_kqblocked); + loopcount = 0; + CRYPTO_Q_UNLOCK(); + crp_sleep = 1; + wait_event_interruptible(cryptoproc_wait, + !(list_empty(&crp_q) || crypto_all_qblocked) || + !(list_empty(&crp_kq) || crypto_all_kqblocked) || + cryptoproc == (pid_t) -1); + crp_sleep = 0; + if (signal_pending (current)) { +#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,0) + spin_lock_irq(¤t->sigmask_lock); +#endif + flush_signals(current); +#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,0) + spin_unlock_irq(¤t->sigmask_lock); +#endif + } + CRYPTO_Q_LOCK(); + dprintk("%s - awake\n", __FUNCTION__); + if (cryptoproc == (pid_t) -1) + break; + cryptostats.cs_intrs++; + } else if (loopcount > crypto_max_loopcount) { + /* + * Give other processes a chance to run if we've + * been using the CPU exclusively for a while. + */ + loopcount = 0; + schedule(); + } + loopcount++; + } + CRYPTO_Q_UNLOCK(); + complete_and_exit(&cryptoproc_exited, 0); +} + +/* + * Crypto returns thread, does callbacks for processed crypto requests. + * Callbacks are done here, rather than in the crypto drivers, because + * callbacks typically are expensive and would slow interrupt handling. + */ +static int +crypto_ret_proc(void *arg) +{ + struct cryptop *crpt; + struct cryptkop *krpt; + unsigned long r_flags; + + ocf_daemonize("crypto_ret"); + + CRYPTO_RETQ_LOCK(); + for (;;) { + /* Harvest return q's for completed ops */ + crpt = NULL; + if (!list_empty(&crp_ret_q)) + crpt = list_entry(crp_ret_q.next, typeof(*crpt), crp_next); + if (crpt != NULL) + list_del(&crpt->crp_next); + + krpt = NULL; + if (!list_empty(&crp_ret_kq)) + krpt = list_entry(crp_ret_kq.next, typeof(*krpt), krp_next); + if (krpt != NULL) + list_del(&krpt->krp_next); + + if (crpt != NULL || krpt != NULL) { + CRYPTO_RETQ_UNLOCK(); + /* + * Run callbacks unlocked. + */ + if (crpt != NULL) + crpt->crp_callback(crpt); + if (krpt != NULL) + krpt->krp_callback(krpt); + CRYPTO_RETQ_LOCK(); + } else { + /* + * Nothing more to be processed. Sleep until we're + * woken because there are more returns to process. + */ + dprintk("%s - sleeping\n", __FUNCTION__); + CRYPTO_RETQ_UNLOCK(); + wait_event_interruptible(cryptoretproc_wait, + cryptoretproc == (pid_t) -1 || + !list_empty(&crp_ret_q) || + !list_empty(&crp_ret_kq)); + if (signal_pending (current)) { +#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,0) + spin_lock_irq(¤t->sigmask_lock); +#endif + flush_signals(current); +#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,0) + spin_unlock_irq(¤t->sigmask_lock); +#endif + } + CRYPTO_RETQ_LOCK(); + dprintk("%s - awake\n", __FUNCTION__); + if (cryptoretproc == (pid_t) -1) { + dprintk("%s - EXITING!\n", __FUNCTION__); + break; + } + cryptostats.cs_rets++; + } + } + CRYPTO_RETQ_UNLOCK(); + complete_and_exit(&cryptoretproc_exited, 0); +} + + +#if 0 /* should put this into /proc or something */ +static void +db_show_drivers(void) +{ + int hid; + + db_printf("%12s %4s %4s %8s %2s %2s\n" + , "Device" + , "Ses" + , "Kops" + , "Flags" + , "QB" + , "KB" + ); + for (hid = 0; hid < crypto_drivers_num; hid++) { + const struct cryptocap *cap = &crypto_drivers[hid]; + if (cap->cc_dev == NULL) + continue; + db_printf("%-12s %4u %4u %08x %2u %2u\n" + , device_get_nameunit(cap->cc_dev) + , cap->cc_sessions + , cap->cc_koperations + , cap->cc_flags + , cap->cc_qblocked + , cap->cc_kqblocked + ); + } +} + +DB_SHOW_COMMAND(crypto, db_show_crypto) +{ + struct cryptop *crp; + + db_show_drivers(); + db_printf("\n"); + + db_printf("%4s %8s %4s %4s %4s %4s %8s %8s\n", + "HID", "Caps", "Ilen", "Olen", "Etype", "Flags", + "Desc", "Callback"); + TAILQ_FOREACH(crp, &crp_q, crp_next) { + db_printf("%4u %08x %4u %4u %4u %04x %8p %8p\n" + , (int) CRYPTO_SESID2HID(crp->crp_sid) + , (int) CRYPTO_SESID2CAPS(crp->crp_sid) + , crp->crp_ilen, crp->crp_olen + , crp->crp_etype + , crp->crp_flags + , crp->crp_desc + , crp->crp_callback + ); + } + if (!TAILQ_EMPTY(&crp_ret_q)) { + db_printf("\n%4s %4s %4s %8s\n", + "HID", "Etype", "Flags", "Callback"); + TAILQ_FOREACH(crp, &crp_ret_q, crp_next) { + db_printf("%4u %4u %04x %8p\n" + , (int) CRYPTO_SESID2HID(crp->crp_sid) + , crp->crp_etype + , crp->crp_flags + , crp->crp_callback + ); + } + } +} + +DB_SHOW_COMMAND(kcrypto, db_show_kcrypto) +{ + struct cryptkop *krp; + + db_show_drivers(); + db_printf("\n"); + + db_printf("%4s %5s %4s %4s %8s %4s %8s\n", + "Op", "Status", "#IP", "#OP", "CRID", "HID", "Callback"); + TAILQ_FOREACH(krp, &crp_kq, krp_next) { + db_printf("%4u %5u %4u %4u %08x %4u %8p\n" + , krp->krp_op + , krp->krp_status + , krp->krp_iparams, krp->krp_oparams + , krp->krp_crid, krp->krp_hid + , krp->krp_callback + ); + } + if (!TAILQ_EMPTY(&crp_ret_q)) { + db_printf("%4s %5s %8s %4s %8s\n", + "Op", "Status", "CRID", "HID", "Callback"); + TAILQ_FOREACH(krp, &crp_ret_kq, krp_next) { + db_printf("%4u %5u %08x %4u %8p\n" + , krp->krp_op + , krp->krp_status + , krp->krp_crid, krp->krp_hid + , krp->krp_callback + ); + } + } +} +#endif + + +static int +crypto_init(void) +{ + int error; + + dprintk("%s(%p)\n", __FUNCTION__, (void *) crypto_init); + + if (crypto_initted) + return 0; + crypto_initted = 1; + + spin_lock_init(&crypto_drivers_lock); + spin_lock_init(&crypto_q_lock); + spin_lock_init(&crypto_ret_q_lock); + + cryptop_zone = kmem_cache_create("cryptop", sizeof(struct cryptop), + 0, SLAB_HWCACHE_ALIGN, NULL +#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,23) + , NULL +#endif + ); + + cryptodesc_zone = kmem_cache_create("cryptodesc", sizeof(struct cryptodesc), + 0, SLAB_HWCACHE_ALIGN, NULL +#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,23) + , NULL +#endif + ); + + if (cryptodesc_zone == NULL || cryptop_zone == NULL) { + printk("crypto: crypto_init cannot setup crypto zones\n"); + error = ENOMEM; + goto bad; + } + + crypto_drivers_num = CRYPTO_DRIVERS_INITIAL; + crypto_drivers = kmalloc(crypto_drivers_num * sizeof(struct cryptocap), + GFP_KERNEL); + if (crypto_drivers == NULL) { + printk("crypto: crypto_init cannot setup crypto drivers\n"); + error = ENOMEM; + goto bad; + } + + memset(crypto_drivers, 0, crypto_drivers_num * sizeof(struct cryptocap)); + + init_completion(&cryptoproc_exited); + init_completion(&cryptoretproc_exited); + + cryptoproc = 0; /* to avoid race condition where proc runs first */ + cryptoproc = kernel_thread(crypto_proc, NULL, CLONE_FS|CLONE_FILES); + if (cryptoproc < 0) { + error = cryptoproc; + printk("crypto: crypto_init cannot start crypto thread; error %d", + error); + goto bad; + } + + cryptoretproc = 0; /* to avoid race condition where proc runs first */ + cryptoretproc = kernel_thread(crypto_ret_proc, NULL, CLONE_FS|CLONE_FILES); + if (cryptoretproc < 0) { + error = cryptoretproc; + printk("crypto: crypto_init cannot start cryptoret thread; error %d", + error); + goto bad; + } + + return 0; +bad: + crypto_exit(); + return error; +} + + +static void +crypto_exit(void) +{ + pid_t p; + unsigned long d_flags; + + dprintk("%s()\n", __FUNCTION__); + + /* + * Terminate any crypto threads. + */ + + CRYPTO_DRIVER_LOCK(); + p = cryptoproc; + cryptoproc = (pid_t) -1; + kill_proc(p, SIGTERM, 1); + wake_up_interruptible(&cryptoproc_wait); + CRYPTO_DRIVER_UNLOCK(); + + wait_for_completion(&cryptoproc_exited); + + CRYPTO_DRIVER_LOCK(); + p = cryptoretproc; + cryptoretproc = (pid_t) -1; + kill_proc(p, SIGTERM, 1); + wake_up_interruptible(&cryptoretproc_wait); + CRYPTO_DRIVER_UNLOCK(); + + wait_for_completion(&cryptoretproc_exited); + + /* XXX flush queues??? */ + + /* + * Reclaim dynamically allocated resources. + */ + if (crypto_drivers != NULL) + kfree(crypto_drivers); + + if (cryptodesc_zone != NULL) + kmem_cache_destroy(cryptodesc_zone); + if (cryptop_zone != NULL) + kmem_cache_destroy(cryptop_zone); +} + + +EXPORT_SYMBOL(crypto_newsession); +EXPORT_SYMBOL(crypto_freesession); +EXPORT_SYMBOL(crypto_get_driverid); +EXPORT_SYMBOL(crypto_kregister); +EXPORT_SYMBOL(crypto_register); +EXPORT_SYMBOL(crypto_unregister); +EXPORT_SYMBOL(crypto_unregister_all); +EXPORT_SYMBOL(crypto_unblock); +EXPORT_SYMBOL(crypto_dispatch); +EXPORT_SYMBOL(crypto_kdispatch); +EXPORT_SYMBOL(crypto_freereq); +EXPORT_SYMBOL(crypto_getreq); +EXPORT_SYMBOL(crypto_done); +EXPORT_SYMBOL(crypto_kdone); +EXPORT_SYMBOL(crypto_getfeat); +EXPORT_SYMBOL(crypto_userasymcrypto); +EXPORT_SYMBOL(crypto_getcaps); +EXPORT_SYMBOL(crypto_find_driver); +EXPORT_SYMBOL(crypto_find_device_byhid); + +module_init(crypto_init); +module_exit(crypto_exit); + +MODULE_LICENSE("BSD"); +MODULE_AUTHOR("David McCullough "); +MODULE_DESCRIPTION("OCF (OpenBSD Cryptographic Framework)"); diff --git a/target/linux/generic-2.4/files/crypto/ocf/cryptocteon/Makefile b/target/linux/generic-2.4/files/crypto/ocf/cryptocteon/Makefile new file mode 100644 index 0000000000..eeed0d6411 --- /dev/null +++ b/target/linux/generic-2.4/files/crypto/ocf/cryptocteon/Makefile @@ -0,0 +1,17 @@ +# for SGlinux builds +-include $(ROOTDIR)/modules/.config + +obj-$(CONFIG_OCF_CRYPTOCTEON) += cryptocteon.o + +obj ?= . +EXTRA_CFLAGS += -I$(obj)/.. -I$(obj)/ + +ifdef CONFIG_OCF_CRYPTOCTEON +# you need the cavium crypto component installed +EXTRA_CFLAGS += -I$(ROOTDIR)/prop/include +endif + +ifdef TOPDIR +-include $(TOPDIR)/Rules.make +endif + diff --git a/target/linux/generic-2.4/files/crypto/ocf/cryptocteon/cavium_crypto.c b/target/linux/generic-2.4/files/crypto/ocf/cryptocteon/cavium_crypto.c new file mode 100644 index 0000000000..ceaf77c5c8 --- /dev/null +++ b/target/linux/generic-2.4/files/crypto/ocf/cryptocteon/cavium_crypto.c @@ -0,0 +1,2283 @@ +/* + * Copyright (c) 2009 David McCullough + * + * Copyright (c) 2003-2007 Cavium Networks (support@cavium.com). All rights + * reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. All advertising materials mentioning features or use of this software + * must display the following acknowledgement: + * This product includes software developed by Cavium Networks + * 4. Cavium Networks' name may not be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * This Software, including technical data, may be subject to U.S. export + * control laws, including the U.S. Export Administration Act and its + * associated regulations, and may be subject to export or import regulations + * in other countries. You warrant that You will comply strictly in all + * respects with all such regulations and acknowledge that you have the + * responsibility to obtain licenses to export, re-export or import the + * Software. + * + * TO THE MAXIMUM EXTENT PERMITTED BY LAW, THE SOFTWARE IS PROVIDED "AS IS" AND + * WITH ALL FAULTS AND CAVIUM MAKES NO PROMISES, REPRESENTATIONS OR WARRANTIES, + * EITHER EXPRESS, IMPLIED, STATUTORY, OR OTHERWISE, WITH RESPECT TO THE + * SOFTWARE, INCLUDING ITS CONDITION, ITS CONFORMITY TO ANY REPRESENTATION OR + * DESCRIPTION, OR THE EXISTENCE OF ANY LATENT OR PATENT DEFECTS, AND CAVIUM + * SPECIFICALLY DISCLAIMS ALL IMPLIED (IF ANY) WARRANTIES OF TITLE, + * MERCHANTABILITY, NONINFRINGEMENT, FITNESS FOR A PARTICULAR PURPOSE, LACK OF + * VIRUSES, ACCURACY OR COMPLETENESS, QUIET ENJOYMENT, QUIET POSSESSION OR + * CORRESPONDENCE TO DESCRIPTION. THE ENTIRE RISK ARISING OUT OF USE OR + * PERFORMANCE OF THE SOFTWARE LIES WITH YOU. +*/ +/****************************************************************************/ + +#include +#include +#include "octeon-asm.h" + +/****************************************************************************/ + +extern unsigned long octeon_crypto_enable(struct octeon_cop2_state *); +extern void octeon_crypto_disable(struct octeon_cop2_state *, unsigned long); + +#define SG_INIT(s, p, i, l) \ + { \ + (i) = 0; \ + (l) = (s)[0].length; \ + (p) = (typeof(p)) sg_virt((s)); \ + CVMX_PREFETCH0((p)); \ + } + +#define SG_CONSUME(s, p, i, l) \ + { \ + (p)++; \ + (l) -= sizeof(*(p)); \ + if ((l) < 0) { \ + dprintk("%s, %d: l = %d\n", __FILE__, __LINE__, l); \ + } else if ((l) == 0) { \ + (i)++; \ + (l) = (s)[0].length; \ + (p) = (typeof(p)) sg_virt(s); \ + CVMX_PREFETCH0((p)); \ + } \ + } + +#define ESP_HEADER_LENGTH 8 +#define DES_CBC_IV_LENGTH 8 +#define AES_CBC_IV_LENGTH 16 +#define ESP_HMAC_LEN 12 + +#define ESP_HEADER_LENGTH 8 +#define DES_CBC_IV_LENGTH 8 + +/****************************************************************************/ + +#define CVM_LOAD_SHA_UNIT(dat, next) { \ + if (next == 0) { \ + next = 1; \ + CVMX_MT_HSH_DAT (dat, 0); \ + } else if (next == 1) { \ + next = 2; \ + CVMX_MT_HSH_DAT (dat, 1); \ + } else if (next == 2) { \ + next = 3; \ + CVMX_MT_HSH_DAT (dat, 2); \ + } else if (next == 3) { \ + next = 4; \ + CVMX_MT_HSH_DAT (dat, 3); \ + } else if (next == 4) { \ + next = 5; \ + CVMX_MT_HSH_DAT (dat, 4); \ + } else if (next == 5) { \ + next = 6; \ + CVMX_MT_HSH_DAT (dat, 5); \ + } else if (next == 6) { \ + next = 7; \ + CVMX_MT_HSH_DAT (dat, 6); \ + } else { \ + CVMX_MT_HSH_STARTSHA (dat); \ + next = 0; \ + } \ +} + +#define CVM_LOAD2_SHA_UNIT(dat1, dat2, next) { \ + if (next == 0) { \ + CVMX_MT_HSH_DAT (dat1, 0); \ + CVMX_MT_HSH_DAT (dat2, 1); \ + next = 2; \ + } else if (next == 1) { \ + CVMX_MT_HSH_DAT (dat1, 1); \ + CVMX_MT_HSH_DAT (dat2, 2); \ + next = 3; \ + } else if (next == 2) { \ + CVMX_MT_HSH_DAT (dat1, 2); \ + CVMX_MT_HSH_DAT (dat2, 3); \ + next = 4; \ + } else if (next == 3) { \ + CVMX_MT_HSH_DAT (dat1, 3); \ + CVMX_MT_HSH_DAT (dat2, 4); \ + next = 5; \ + } else if (next == 4) { \ + CVMX_MT_HSH_DAT (dat1, 4); \ + CVMX_MT_HSH_DAT (dat2, 5); \ + next = 6; \ + } else if (next == 5) { \ + CVMX_MT_HSH_DAT (dat1, 5); \ + CVMX_MT_HSH_DAT (dat2, 6); \ + next = 7; \ + } else if (next == 6) { \ + CVMX_MT_HSH_DAT (dat1, 6); \ + CVMX_MT_HSH_STARTSHA (dat2); \ + next = 0; \ + } else { \ + CVMX_MT_HSH_STARTSHA (dat1); \ + CVMX_MT_HSH_DAT (dat2, 0); \ + next = 1; \ + } \ +} + +/****************************************************************************/ + +#define CVM_LOAD_MD5_UNIT(dat, next) { \ + if (next == 0) { \ + next = 1; \ + CVMX_MT_HSH_DAT (dat, 0); \ + } else if (next == 1) { \ + next = 2; \ + CVMX_MT_HSH_DAT (dat, 1); \ + } else if (next == 2) { \ + next = 3; \ + CVMX_MT_HSH_DAT (dat, 2); \ + } else if (next == 3) { \ + next = 4; \ + CVMX_MT_HSH_DAT (dat, 3); \ + } else if (next == 4) { \ + next = 5; \ + CVMX_MT_HSH_DAT (dat, 4); \ + } else if (next == 5) { \ + next = 6; \ + CVMX_MT_HSH_DAT (dat, 5); \ + } else if (next == 6) { \ + next = 7; \ + CVMX_MT_HSH_DAT (dat, 6); \ + } else { \ + CVMX_MT_HSH_STARTMD5 (dat); \ + next = 0; \ + } \ +} + +#define CVM_LOAD2_MD5_UNIT(dat1, dat2, next) { \ + if (next == 0) { \ + CVMX_MT_HSH_DAT (dat1, 0); \ + CVMX_MT_HSH_DAT (dat2, 1); \ + next = 2; \ + } else if (next == 1) { \ + CVMX_MT_HSH_DAT (dat1, 1); \ + CVMX_MT_HSH_DAT (dat2, 2); \ + next = 3; \ + } else if (next == 2) { \ + CVMX_MT_HSH_DAT (dat1, 2); \ + CVMX_MT_HSH_DAT (dat2, 3); \ + next = 4; \ + } else if (next == 3) { \ + CVMX_MT_HSH_DAT (dat1, 3); \ + CVMX_MT_HSH_DAT (dat2, 4); \ + next = 5; \ + } else if (next == 4) { \ + CVMX_MT_HSH_DAT (dat1, 4); \ + CVMX_MT_HSH_DAT (dat2, 5); \ + next = 6; \ + } else if (next == 5) { \ + CVMX_MT_HSH_DAT (dat1, 5); \ + CVMX_MT_HSH_DAT (dat2, 6); \ + next = 7; \ + } else if (next == 6) { \ + CVMX_MT_HSH_DAT (dat1, 6); \ + CVMX_MT_HSH_STARTMD5 (dat2); \ + next = 0; \ + } else { \ + CVMX_MT_HSH_STARTMD5 (dat1); \ + CVMX_MT_HSH_DAT (dat2, 0); \ + next = 1; \ + } \ +} + +/****************************************************************************/ + +static inline uint64_t +swap64(uint64_t a) +{ + return ((a >> 56) | + (((a >> 48) & 0xfful) << 8) | + (((a >> 40) & 0xfful) << 16) | + (((a >> 32) & 0xfful) << 24) | + (((a >> 24) & 0xfful) << 32) | + (((a >> 16) & 0xfful) << 40) | + (((a >> 8) & 0xfful) << 48) | (((a >> 0) & 0xfful) << 56)); +} + +/****************************************************************************/ + +void +octo_calc_hash(__u8 auth, unsigned char *key, uint64_t *inner, uint64_t *outer) +{ + uint8_t hash_key[64]; + uint64_t *key1; + register uint64_t xor1 = 0x3636363636363636ULL; + register uint64_t xor2 = 0x5c5c5c5c5c5c5c5cULL; + struct octeon_cop2_state state; + unsigned long flags; + + dprintk("%s()\n", __FUNCTION__); + + memset(hash_key, 0, sizeof(hash_key)); + memcpy(hash_key, (uint8_t *) key, (auth ? 20 : 16)); + key1 = (uint64_t *) hash_key; + flags = octeon_crypto_enable(&state); + if (auth) { + CVMX_MT_HSH_IV(0x67452301EFCDAB89ULL, 0); + CVMX_MT_HSH_IV(0x98BADCFE10325476ULL, 1); + CVMX_MT_HSH_IV(0xC3D2E1F000000000ULL, 2); + } else { + CVMX_MT_HSH_IV(0x0123456789ABCDEFULL, 0); + CVMX_MT_HSH_IV(0xFEDCBA9876543210ULL, 1); + } + + CVMX_MT_HSH_DAT((*key1 ^ xor1), 0); + key1++; + CVMX_MT_HSH_DAT((*key1 ^ xor1), 1); + key1++; + CVMX_MT_HSH_DAT((*key1 ^ xor1), 2); + key1++; + CVMX_MT_HSH_DAT((*key1 ^ xor1), 3); + key1++; + CVMX_MT_HSH_DAT((*key1 ^ xor1), 4); + key1++; + CVMX_MT_HSH_DAT((*key1 ^ xor1), 5); + key1++; + CVMX_MT_HSH_DAT((*key1 ^ xor1), 6); + key1++; + if (auth) + CVMX_MT_HSH_STARTSHA((*key1 ^ xor1)); + else + CVMX_MT_HSH_STARTMD5((*key1 ^ xor1)); + + CVMX_MF_HSH_IV(inner[0], 0); + CVMX_MF_HSH_IV(inner[1], 1); + if (auth) { + inner[2] = 0; + CVMX_MF_HSH_IV(((uint64_t *) inner)[2], 2); + } + + memset(hash_key, 0, sizeof(hash_key)); + memcpy(hash_key, (uint8_t *) key, (auth ? 20 : 16)); + key1 = (uint64_t *) hash_key; + if (auth) { + CVMX_MT_HSH_IV(0x67452301EFCDAB89ULL, 0); + CVMX_MT_HSH_IV(0x98BADCFE10325476ULL, 1); + CVMX_MT_HSH_IV(0xC3D2E1F000000000ULL, 2); + } else { + CVMX_MT_HSH_IV(0x0123456789ABCDEFULL, 0); + CVMX_MT_HSH_IV(0xFEDCBA9876543210ULL, 1); + } + + CVMX_MT_HSH_DAT((*key1 ^ xor2), 0); + key1++; + CVMX_MT_HSH_DAT((*key1 ^ xor2), 1); + key1++; + CVMX_MT_HSH_DAT((*key1 ^ xor2), 2); + key1++; + CVMX_MT_HSH_DAT((*key1 ^ xor2), 3); + key1++; + CVMX_MT_HSH_DAT((*key1 ^ xor2), 4); + key1++; + CVMX_MT_HSH_DAT((*key1 ^ xor2), 5); + key1++; + CVMX_MT_HSH_DAT((*key1 ^ xor2), 6); + key1++; + if (auth) + CVMX_MT_HSH_STARTSHA((*key1 ^ xor2)); + else + CVMX_MT_HSH_STARTMD5((*key1 ^ xor2)); + + CVMX_MF_HSH_IV(outer[0], 0); + CVMX_MF_HSH_IV(outer[1], 1); + if (auth) { + outer[2] = 0; + CVMX_MF_HSH_IV(outer[2], 2); + } + octeon_crypto_disable(&state, flags); + return; +} + +/****************************************************************************/ +/* DES functions */ + +int +octo_des_cbc_encrypt( + struct octo_sess *od, + struct scatterlist *sg, int sg_len, + int auth_off, int auth_len, + int crypt_off, int crypt_len, + int icv_off, uint8_t *ivp) +{ + uint64_t *data; + int data_i, data_l; + struct octeon_cop2_state state; + unsigned long flags; + + dprintk("%s()\n", __FUNCTION__); + + if (unlikely(od == NULL || sg==NULL || sg_len==0 || ivp==NULL || + (crypt_off & 0x7) || (crypt_off + crypt_len > sg_len))) { + dprintk("%s: Bad parameters od=%p sg=%p sg_len=%d " + "auth_off=%d auth_len=%d crypt_off=%d crypt_len=%d " + "icv_off=%d ivp=%p\n", __FUNCTION__, od, sg, sg_len, + auth_off, auth_len, crypt_off, crypt_len, icv_off, ivp); + return -EINVAL; + } + + SG_INIT(sg, data, data_i, data_l); + + CVMX_PREFETCH0(ivp); + CVMX_PREFETCH0(od->octo_enckey); + + flags = octeon_crypto_enable(&state); + + /* load 3DES Key */ + CVMX_MT_3DES_KEY(((uint64_t *) od->octo_enckey)[0], 0); + if (od->octo_encklen == 24) { + CVMX_MT_3DES_KEY(((uint64_t *) od->octo_enckey)[1], 1); + CVMX_MT_3DES_KEY(((uint64_t *) od->octo_enckey)[2], 2); + } else if (od->octo_encklen == 8) { + CVMX_MT_3DES_KEY(((uint64_t *) od->octo_enckey)[0], 1); + CVMX_MT_3DES_KEY(((uint64_t *) od->octo_enckey)[0], 2); + } else { + octeon_crypto_disable(&state, flags); + dprintk("%s: Bad key length %d\n", __FUNCTION__, od->octo_encklen); + return -EINVAL; + } + + CVMX_MT_3DES_IV(* (uint64_t *) ivp); + + while (crypt_off > 0) { + SG_CONSUME(sg, data, data_i, data_l); + crypt_off -= 8; + } + + while (crypt_len > 0) { + CVMX_MT_3DES_ENC_CBC(*data); + CVMX_MF_3DES_RESULT(*data); + SG_CONSUME(sg, data, data_i, data_l); + crypt_len -= 8; + } + + octeon_crypto_disable(&state, flags); + return 0; +} + + +int +octo_des_cbc_decrypt( + struct octo_sess *od, + struct scatterlist *sg, int sg_len, + int auth_off, int auth_len, + int crypt_off, int crypt_len, + int icv_off, uint8_t *ivp) +{ + uint64_t *data; + int data_i, data_l; + struct octeon_cop2_state state; + unsigned long flags; + + dprintk("%s()\n", __FUNCTION__); + + if (unlikely(od == NULL || sg==NULL || sg_len==0 || ivp==NULL || + (crypt_off & 0x7) || (crypt_off + crypt_len > sg_len))) { + dprintk("%s: Bad parameters od=%p sg=%p sg_len=%d " + "auth_off=%d auth_len=%d crypt_off=%d crypt_len=%d " + "icv_off=%d ivp=%p\n", __FUNCTION__, od, sg, sg_len, + auth_off, auth_len, crypt_off, crypt_len, icv_off, ivp); + return -EINVAL; + } + + SG_INIT(sg, data, data_i, data_l); + + CVMX_PREFETCH0(ivp); + CVMX_PREFETCH0(od->octo_enckey); + + flags = octeon_crypto_enable(&state); + + /* load 3DES Key */ + CVMX_MT_3DES_KEY(((uint64_t *) od->octo_enckey)[0], 0); + if (od->octo_encklen == 24) { + CVMX_MT_3DES_KEY(((uint64_t *) od->octo_enckey)[1], 1); + CVMX_MT_3DES_KEY(((uint64_t *) od->octo_enckey)[2], 2); + } else if (od->octo_encklen == 8) { + CVMX_MT_3DES_KEY(((uint64_t *) od->octo_enckey)[0], 1); + CVMX_MT_3DES_KEY(((uint64_t *) od->octo_enckey)[0], 2); + } else { + octeon_crypto_disable(&state, flags); + dprintk("%s: Bad key length %d\n", __FUNCTION__, od->octo_encklen); + return -EINVAL; + } + + CVMX_MT_3DES_IV(* (uint64_t *) ivp); + + while (crypt_off > 0) { + SG_CONSUME(sg, data, data_i, data_l); + crypt_off -= 8; + } + + while (crypt_len > 0) { + CVMX_MT_3DES_DEC_CBC(*data); + CVMX_MF_3DES_RESULT(*data); + SG_CONSUME(sg, data, data_i, data_l); + crypt_len -= 8; + } + + octeon_crypto_disable(&state, flags); + return 0; +} + +/****************************************************************************/ +/* AES functions */ + +int +octo_aes_cbc_encrypt( + struct octo_sess *od, + struct scatterlist *sg, int sg_len, + int auth_off, int auth_len, + int crypt_off, int crypt_len, + int icv_off, uint8_t *ivp) +{ + uint64_t *data, *pdata; + int data_i, data_l; + struct octeon_cop2_state state; + unsigned long flags; + + dprintk("%s()\n", __FUNCTION__); + + if (unlikely(od == NULL || sg==NULL || sg_len==0 || ivp==NULL || + (crypt_off & 0x7) || (crypt_off + crypt_len > sg_len))) { + dprintk("%s: Bad parameters od=%p sg=%p sg_len=%d " + "auth_off=%d auth_len=%d crypt_off=%d crypt_len=%d " + "icv_off=%d ivp=%p\n", __FUNCTION__, od, sg, sg_len, + auth_off, auth_len, crypt_off, crypt_len, icv_off, ivp); + return -EINVAL; + } + + SG_INIT(sg, data, data_i, data_l); + + CVMX_PREFETCH0(ivp); + CVMX_PREFETCH0(od->octo_enckey); + + flags = octeon_crypto_enable(&state); + + /* load AES Key */ + CVMX_MT_AES_KEY(((uint64_t *) od->octo_enckey)[0], 0); + CVMX_MT_AES_KEY(((uint64_t *) od->octo_enckey)[1], 1); + + if (od->octo_encklen == 16) { + CVMX_MT_AES_KEY(0x0, 2); + CVMX_MT_AES_KEY(0x0, 3); + } else if (od->octo_encklen == 24) { + CVMX_MT_AES_KEY(((uint64_t *) od->octo_enckey)[2], 2); + CVMX_MT_AES_KEY(0x0, 3); + } else if (od->octo_encklen == 32) { + CVMX_MT_AES_KEY(((uint64_t *) od->octo_enckey)[2], 2); + CVMX_MT_AES_KEY(((uint64_t *) od->octo_enckey)[3], 3); + } else { + octeon_crypto_disable(&state, flags); + dprintk("%s: Bad key length %d\n", __FUNCTION__, od->octo_encklen); + return -EINVAL; + } + CVMX_MT_AES_KEYLENGTH(od->octo_encklen / 8 - 1); + + CVMX_MT_AES_IV(((uint64_t *) ivp)[0], 0); + CVMX_MT_AES_IV(((uint64_t *) ivp)[1], 1); + + while (crypt_off > 0) { + SG_CONSUME(sg, data, data_i, data_l); + crypt_off -= 8; + } + + while (crypt_len > 0) { + pdata = data; + CVMX_MT_AES_ENC_CBC0(*data); + SG_CONSUME(sg, data, data_i, data_l); + CVMX_MT_AES_ENC_CBC1(*data); + CVMX_MF_AES_RESULT(*pdata, 0); + CVMX_MF_AES_RESULT(*data, 1); + SG_CONSUME(sg, data, data_i, data_l); + crypt_len -= 16; + } + + octeon_crypto_disable(&state, flags); + return 0; +} + + +int +octo_aes_cbc_decrypt( + struct octo_sess *od, + struct scatterlist *sg, int sg_len, + int auth_off, int auth_len, + int crypt_off, int crypt_len, + int icv_off, uint8_t *ivp) +{ + uint64_t *data, *pdata; + int data_i, data_l; + struct octeon_cop2_state state; + unsigned long flags; + + dprintk("%s()\n", __FUNCTION__); + + if (unlikely(od == NULL || sg==NULL || sg_len==0 || ivp==NULL || + (crypt_off & 0x7) || (crypt_off + crypt_len > sg_len))) { + dprintk("%s: Bad parameters od=%p sg=%p sg_len=%d " + "auth_off=%d auth_len=%d crypt_off=%d crypt_len=%d " + "icv_off=%d ivp=%p\n", __FUNCTION__, od, sg, sg_len, + auth_off, auth_len, crypt_off, crypt_len, icv_off, ivp); + return -EINVAL; + } + + SG_INIT(sg, data, data_i, data_l); + + CVMX_PREFETCH0(ivp); + CVMX_PREFETCH0(od->octo_enckey); + + flags = octeon_crypto_enable(&state); + + /* load AES Key */ + CVMX_MT_AES_KEY(((uint64_t *) od->octo_enckey)[0], 0); + CVMX_MT_AES_KEY(((uint64_t *) od->octo_enckey)[1], 1); + + if (od->octo_encklen == 16) { + CVMX_MT_AES_KEY(0x0, 2); + CVMX_MT_AES_KEY(0x0, 3); + } else if (od->octo_encklen == 24) { + CVMX_MT_AES_KEY(((uint64_t *) od->octo_enckey)[2], 2); + CVMX_MT_AES_KEY(0x0, 3); + } else if (od->octo_encklen == 32) { + CVMX_MT_AES_KEY(((uint64_t *) od->octo_enckey)[2], 2); + CVMX_MT_AES_KEY(((uint64_t *) od->octo_enckey)[3], 3); + } else { + octeon_crypto_disable(&state, flags); + dprintk("%s: Bad key length %d\n", __FUNCTION__, od->octo_encklen); + return -EINVAL; + } + CVMX_MT_AES_KEYLENGTH(od->octo_encklen / 8 - 1); + + CVMX_MT_AES_IV(((uint64_t *) ivp)[0], 0); + CVMX_MT_AES_IV(((uint64_t *) ivp)[1], 1); + + while (crypt_off > 0) { + SG_CONSUME(sg, data, data_i, data_l); + crypt_off -= 8; + } + + while (crypt_len > 0) { + pdata = data; + CVMX_MT_AES_DEC_CBC0(*data); + SG_CONSUME(sg, data, data_i, data_l); + CVMX_MT_AES_DEC_CBC1(*data); + CVMX_MF_AES_RESULT(*pdata, 0); + CVMX_MF_AES_RESULT(*data, 1); + SG_CONSUME(sg, data, data_i, data_l); + crypt_len -= 16; + } + + octeon_crypto_disable(&state, flags); + return 0; +} + +/****************************************************************************/ +/* MD5 */ + +int +octo_null_md5_encrypt( + struct octo_sess *od, + struct scatterlist *sg, int sg_len, + int auth_off, int auth_len, + int crypt_off, int crypt_len, + int icv_off, uint8_t *ivp) +{ + register int next = 0; + uint64_t *data; + uint64_t tmp1, tmp2; + int data_i, data_l, alen = auth_len; + struct octeon_cop2_state state; + unsigned long flags; + + dprintk("%s()\n", __FUNCTION__); + + if (unlikely(od == NULL || sg==NULL || sg_len==0 || + (auth_off & 0x7) || (auth_off + auth_len > sg_len))) { + dprintk("%s: Bad parameters od=%p sg=%p sg_len=%d " + "auth_off=%d auth_len=%d crypt_off=%d crypt_len=%d " + "icv_off=%d ivp=%p\n", __FUNCTION__, od, sg, sg_len, + auth_off, auth_len, crypt_off, crypt_len, icv_off, ivp); + return -EINVAL; + } + + SG_INIT(sg, data, data_i, data_l); + + flags = octeon_crypto_enable(&state); + + /* Load MD5 IV */ + CVMX_MT_HSH_IV(od->octo_hminner[0], 0); + CVMX_MT_HSH_IV(od->octo_hminner[1], 1); + + while (auth_off > 0) { + SG_CONSUME(sg, data, data_i, data_l); + auth_off -= 8; + } + + while (auth_len > 0) { + CVM_LOAD_MD5_UNIT(*data, next); + auth_len -= 8; + SG_CONSUME(sg, data, data_i, data_l); + } + + /* finish the hash */ + CVMX_PREFETCH0(od->octo_hmouter); +#if 0 + if (unlikely(inplen)) { + uint64_t tmp = 0; + uint8_t *p = (uint8_t *) & tmp; + p[inplen] = 0x80; + do { + inplen--; + p[inplen] = ((uint8_t *) data)[inplen]; + } while (inplen); + CVM_LOAD_MD5_UNIT(tmp, next); + } else { + CVM_LOAD_MD5_UNIT(0x8000000000000000ULL, next); + } +#else + CVM_LOAD_MD5_UNIT(0x8000000000000000ULL, next); +#endif + + /* Finish Inner hash */ + while (next != 7) { + CVM_LOAD_MD5_UNIT(((uint64_t) 0x0ULL), next); + } + CVMX_ES64(tmp1, ((alen + 64) << 3)); + CVM_LOAD_MD5_UNIT(tmp1, next); + + /* Get the inner hash of HMAC */ + CVMX_MF_HSH_IV(tmp1, 0); + CVMX_MF_HSH_IV(tmp2, 1); + + /* Initialize hash unit */ + CVMX_MT_HSH_IV(od->octo_hmouter[0], 0); + CVMX_MT_HSH_IV(od->octo_hmouter[1], 1); + + CVMX_MT_HSH_DAT(tmp1, 0); + CVMX_MT_HSH_DAT(tmp2, 1); + CVMX_MT_HSH_DAT(0x8000000000000000ULL, 2); + CVMX_MT_HSH_DATZ(3); + CVMX_MT_HSH_DATZ(4); + CVMX_MT_HSH_DATZ(5); + CVMX_MT_HSH_DATZ(6); + CVMX_ES64(tmp1, ((64 + 16) << 3)); + CVMX_MT_HSH_STARTMD5(tmp1); + + /* save the HMAC */ + SG_INIT(sg, data, data_i, data_l); + while (icv_off > 0) { + SG_CONSUME(sg, data, data_i, data_l); + icv_off -= 8; + } + CVMX_MF_HSH_IV(*data, 0); + SG_CONSUME(sg, data, data_i, data_l); + CVMX_MF_HSH_IV(tmp1, 1); + *(uint32_t *)data = (uint32_t) (tmp1 >> 32); + + octeon_crypto_disable(&state, flags); + return 0; +} + +/****************************************************************************/ +/* SHA1 */ + +int +octo_null_sha1_encrypt( + struct octo_sess *od, + struct scatterlist *sg, int sg_len, + int auth_off, int auth_len, + int crypt_off, int crypt_len, + int icv_off, uint8_t *ivp) +{ + register int next = 0; + uint64_t *data; + uint64_t tmp1, tmp2, tmp3; + int data_i, data_l, alen = auth_len; + struct octeon_cop2_state state; + unsigned long flags; + + dprintk("%s()\n", __FUNCTION__); + + if (unlikely(od == NULL || sg==NULL || sg_len==0 || + (auth_off & 0x7) || (auth_off + auth_len > sg_len))) { + dprintk("%s: Bad parameters od=%p sg=%p sg_len=%d " + "auth_off=%d auth_len=%d crypt_off=%d crypt_len=%d " + "icv_off=%d ivp=%p\n", __FUNCTION__, od, sg, sg_len, + auth_off, auth_len, crypt_off, crypt_len, icv_off, ivp); + return -EINVAL; + } + + SG_INIT(sg, data, data_i, data_l); + + flags = octeon_crypto_enable(&state); + + /* Load SHA1 IV */ + CVMX_MT_HSH_IV(od->octo_hminner[0], 0); + CVMX_MT_HSH_IV(od->octo_hminner[1], 1); + CVMX_MT_HSH_IV(od->octo_hminner[2], 2); + + while (auth_off > 0) { + SG_CONSUME(sg, data, data_i, data_l); + auth_off -= 8; + } + + while (auth_len > 0) { + CVM_LOAD_SHA_UNIT(*data, next); + auth_len -= 8; + SG_CONSUME(sg, data, data_i, data_l); + } + + /* finish the hash */ + CVMX_PREFETCH0(od->octo_hmouter); +#if 0 + if (unlikely(inplen)) { + uint64_t tmp = 0; + uint8_t *p = (uint8_t *) & tmp; + p[inplen] = 0x80; + do { + inplen--; + p[inplen] = ((uint8_t *) data)[inplen]; + } while (inplen); + CVM_LOAD_MD5_UNIT(tmp, next); + } else { + CVM_LOAD_MD5_UNIT(0x8000000000000000ULL, next); + } +#else + CVM_LOAD_SHA_UNIT(0x8000000000000000ULL, next); +#endif + + /* Finish Inner hash */ + while (next != 7) { + CVM_LOAD_SHA_UNIT(((uint64_t) 0x0ULL), next); + } + CVM_LOAD_SHA_UNIT((uint64_t) ((alen + 64) << 3), next); + + /* Get the inner hash of HMAC */ + CVMX_MF_HSH_IV(tmp1, 0); + CVMX_MF_HSH_IV(tmp2, 1); + tmp3 = 0; + CVMX_MF_HSH_IV(tmp3, 2); + + /* Initialize hash unit */ + CVMX_MT_HSH_IV(od->octo_hmouter[0], 0); + CVMX_MT_HSH_IV(od->octo_hmouter[1], 1); + CVMX_MT_HSH_IV(od->octo_hmouter[2], 2); + + CVMX_MT_HSH_DAT(tmp1, 0); + CVMX_MT_HSH_DAT(tmp2, 1); + tmp3 |= 0x0000000080000000; + CVMX_MT_HSH_DAT(tmp3, 2); + CVMX_MT_HSH_DATZ(3); + CVMX_MT_HSH_DATZ(4); + CVMX_MT_HSH_DATZ(5); + CVMX_MT_HSH_DATZ(6); + CVMX_MT_HSH_STARTSHA((uint64_t) ((64 + 20) << 3)); + + /* save the HMAC */ + SG_INIT(sg, data, data_i, data_l); + while (icv_off > 0) { + SG_CONSUME(sg, data, data_i, data_l); + icv_off -= 8; + } + CVMX_MF_HSH_IV(*data, 0); + SG_CONSUME(sg, data, data_i, data_l); + CVMX_MF_HSH_IV(tmp1, 1); + *(uint32_t *)data = (uint32_t) (tmp1 >> 32); + + octeon_crypto_disable(&state, flags); + return 0; +} + +/****************************************************************************/ +/* DES MD5 */ + +int +octo_des_cbc_md5_encrypt( + struct octo_sess *od, + struct scatterlist *sg, int sg_len, + int auth_off, int auth_len, + int crypt_off, int crypt_len, + int icv_off, uint8_t *ivp) +{ + register int next = 0; + union { + uint32_t data32[2]; + uint64_t data64[1]; + } mydata; + uint64_t *data = &mydata.data64[0]; + uint32_t *data32; + uint64_t tmp1, tmp2; + int data_i, data_l, alen = auth_len; + struct octeon_cop2_state state; + unsigned long flags; + + dprintk("%s()\n", __FUNCTION__); + + if (unlikely(od == NULL || sg==NULL || sg_len==0 || ivp==NULL || + (crypt_off & 0x3) || (crypt_off + crypt_len > sg_len) || + (crypt_len & 0x7) || + (auth_len & 0x7) || + (auth_off & 0x3) || (auth_off + auth_len > sg_len))) { + dprintk("%s: Bad parameters od=%p sg=%p sg_len=%d " + "auth_off=%d auth_len=%d crypt_off=%d crypt_len=%d " + "icv_off=%d ivp=%p\n", __FUNCTION__, od, sg, sg_len, + auth_off, auth_len, crypt_off, crypt_len, icv_off, ivp); + return -EINVAL; + } + + SG_INIT(sg, data32, data_i, data_l); + + CVMX_PREFETCH0(ivp); + CVMX_PREFETCH0(od->octo_enckey); + + flags = octeon_crypto_enable(&state); + + /* load 3DES Key */ + CVMX_MT_3DES_KEY(((uint64_t *) od->octo_enckey)[0], 0); + if (od->octo_encklen == 24) { + CVMX_MT_3DES_KEY(((uint64_t *) od->octo_enckey)[1], 1); + CVMX_MT_3DES_KEY(((uint64_t *) od->octo_enckey)[2], 2); + } else if (od->octo_encklen == 8) { + CVMX_MT_3DES_KEY(((uint64_t *) od->octo_enckey)[0], 1); + CVMX_MT_3DES_KEY(((uint64_t *) od->octo_enckey)[0], 2); + } else { + octeon_crypto_disable(&state, flags); + dprintk("%s: Bad key length %d\n", __FUNCTION__, od->octo_encklen); + return -EINVAL; + } + + CVMX_MT_3DES_IV(* (uint64_t *) ivp); + + /* Load MD5 IV */ + CVMX_MT_HSH_IV(od->octo_hminner[0], 0); + CVMX_MT_HSH_IV(od->octo_hminner[1], 1); + + while (crypt_off > 0 && auth_off > 0) { + SG_CONSUME(sg, data32, data_i, data_l); + crypt_off -= 4; + auth_off -= 4; + } + + while (crypt_len > 0 || auth_len > 0) { + uint32_t *first = data32; + mydata.data32[0] = *first; + SG_CONSUME(sg, data32, data_i, data_l); + mydata.data32[1] = *data32; + if (crypt_off <= 0) { + if (crypt_len > 0) { + CVMX_MT_3DES_ENC_CBC(*data); + CVMX_MF_3DES_RESULT(*data); + crypt_len -= 8; + } + } else + crypt_off -= 8; + if (auth_off <= 0) { + if (auth_len > 0) { + CVM_LOAD_MD5_UNIT(*data, next); + auth_len -= 8; + } + } else + auth_off -= 8; + *first = mydata.data32[0]; + *data32 = mydata.data32[1]; + SG_CONSUME(sg, data32, data_i, data_l); + } + + /* finish the hash */ + CVMX_PREFETCH0(od->octo_hmouter); +#if 0 + if (unlikely(inplen)) { + uint64_t tmp = 0; + uint8_t *p = (uint8_t *) & tmp; + p[inplen] = 0x80; + do { + inplen--; + p[inplen] = ((uint8_t *) data)[inplen]; + } while (inplen); + CVM_LOAD_MD5_UNIT(tmp, next); + } else { + CVM_LOAD_MD5_UNIT(0x8000000000000000ULL, next); + } +#else + CVM_LOAD_MD5_UNIT(0x8000000000000000ULL, next); +#endif + + /* Finish Inner hash */ + while (next != 7) { + CVM_LOAD_MD5_UNIT(((uint64_t) 0x0ULL), next); + } + CVMX_ES64(tmp1, ((alen + 64) << 3)); + CVM_LOAD_MD5_UNIT(tmp1, next); + + /* Get the inner hash of HMAC */ + CVMX_MF_HSH_IV(tmp1, 0); + CVMX_MF_HSH_IV(tmp2, 1); + + /* Initialize hash unit */ + CVMX_MT_HSH_IV(od->octo_hmouter[0], 0); + CVMX_MT_HSH_IV(od->octo_hmouter[1], 1); + + CVMX_MT_HSH_DAT(tmp1, 0); + CVMX_MT_HSH_DAT(tmp2, 1); + CVMX_MT_HSH_DAT(0x8000000000000000ULL, 2); + CVMX_MT_HSH_DATZ(3); + CVMX_MT_HSH_DATZ(4); + CVMX_MT_HSH_DATZ(5); + CVMX_MT_HSH_DATZ(6); + CVMX_ES64(tmp1, ((64 + 16) << 3)); + CVMX_MT_HSH_STARTMD5(tmp1); + + /* save the HMAC */ + SG_INIT(sg, data32, data_i, data_l); + while (icv_off > 0) { + SG_CONSUME(sg, data32, data_i, data_l); + icv_off -= 4; + } + CVMX_MF_HSH_IV(tmp1, 0); + *data32 = (uint32_t) (tmp1 >> 32); + SG_CONSUME(sg, data32, data_i, data_l); + *data32 = (uint32_t) tmp1; + SG_CONSUME(sg, data32, data_i, data_l); + CVMX_MF_HSH_IV(tmp1, 1); + *data32 = (uint32_t) (tmp1 >> 32); + + octeon_crypto_disable(&state, flags); + return 0; +} + +int +octo_des_cbc_md5_decrypt( + struct octo_sess *od, + struct scatterlist *sg, int sg_len, + int auth_off, int auth_len, + int crypt_off, int crypt_len, + int icv_off, uint8_t *ivp) +{ + register int next = 0; + union { + uint32_t data32[2]; + uint64_t data64[1]; + } mydata; + uint64_t *data = &mydata.data64[0]; + uint32_t *data32; + uint64_t tmp1, tmp2; + int data_i, data_l, alen = auth_len; + struct octeon_cop2_state state; + unsigned long flags; + + dprintk("%s()\n", __FUNCTION__); + + if (unlikely(od == NULL || sg==NULL || sg_len==0 || ivp==NULL || + (crypt_off & 0x3) || (crypt_off + crypt_len > sg_len) || + (crypt_len & 0x7) || + (auth_len & 0x7) || + (auth_off & 0x3) || (auth_off + auth_len > sg_len))) { + dprintk("%s: Bad parameters od=%p sg=%p sg_len=%d " + "auth_off=%d auth_len=%d crypt_off=%d crypt_len=%d " + "icv_off=%d ivp=%p\n", __FUNCTION__, od, sg, sg_len, + auth_off, auth_len, crypt_off, crypt_len, icv_off, ivp); + return -EINVAL; + } + + SG_INIT(sg, data32, data_i, data_l); + + CVMX_PREFETCH0(ivp); + CVMX_PREFETCH0(od->octo_enckey); + + flags = octeon_crypto_enable(&state); + + /* load 3DES Key */ + CVMX_MT_3DES_KEY(((uint64_t *) od->octo_enckey)[0], 0); + if (od->octo_encklen == 24) { + CVMX_MT_3DES_KEY(((uint64_t *) od->octo_enckey)[1], 1); + CVMX_MT_3DES_KEY(((uint64_t *) od->octo_enckey)[2], 2); + } else if (od->octo_encklen == 8) { + CVMX_MT_3DES_KEY(((uint64_t *) od->octo_enckey)[0], 1); + CVMX_MT_3DES_KEY(((uint64_t *) od->octo_enckey)[0], 2); + } else { + octeon_crypto_disable(&state, flags); + dprintk("%s: Bad key length %d\n", __FUNCTION__, od->octo_encklen); + return -EINVAL; + } + + CVMX_MT_3DES_IV(* (uint64_t *) ivp); + + /* Load MD5 IV */ + CVMX_MT_HSH_IV(od->octo_hminner[0], 0); + CVMX_MT_HSH_IV(od->octo_hminner[1], 1); + + while (crypt_off > 0 && auth_off > 0) { + SG_CONSUME(sg, data32, data_i, data_l); + crypt_off -= 4; + auth_off -= 4; + } + + while (crypt_len > 0 || auth_len > 0) { + uint32_t *first = data32; + mydata.data32[0] = *first; + SG_CONSUME(sg, data32, data_i, data_l); + mydata.data32[1] = *data32; + if (auth_off <= 0) { + if (auth_len > 0) { + CVM_LOAD_MD5_UNIT(*data, next); + auth_len -= 8; + } + } else + auth_off -= 8; + if (crypt_off <= 0) { + if (crypt_len > 0) { + CVMX_MT_3DES_DEC_CBC(*data); + CVMX_MF_3DES_RESULT(*data); + crypt_len -= 8; + } + } else + crypt_off -= 8; + *first = mydata.data32[0]; + *data32 = mydata.data32[1]; + SG_CONSUME(sg, data32, data_i, data_l); + } + + /* finish the hash */ + CVMX_PREFETCH0(od->octo_hmouter); +#if 0 + if (unlikely(inplen)) { + uint64_t tmp = 0; + uint8_t *p = (uint8_t *) & tmp; + p[inplen] = 0x80; + do { + inplen--; + p[inplen] = ((uint8_t *) data)[inplen]; + } while (inplen); + CVM_LOAD_MD5_UNIT(tmp, next); + } else { + CVM_LOAD_MD5_UNIT(0x8000000000000000ULL, next); + } +#else + CVM_LOAD_MD5_UNIT(0x8000000000000000ULL, next); +#endif + + /* Finish Inner hash */ + while (next != 7) { + CVM_LOAD_MD5_UNIT(((uint64_t) 0x0ULL), next); + } + CVMX_ES64(tmp1, ((alen + 64) << 3)); + CVM_LOAD_MD5_UNIT(tmp1, next); + + /* Get the inner hash of HMAC */ + CVMX_MF_HSH_IV(tmp1, 0); + CVMX_MF_HSH_IV(tmp2, 1); + + /* Initialize hash unit */ + CVMX_MT_HSH_IV(od->octo_hmouter[0], 0); + CVMX_MT_HSH_IV(od->octo_hmouter[1], 1); + + CVMX_MT_HSH_DAT(tmp1, 0); + CVMX_MT_HSH_DAT(tmp2, 1); + CVMX_MT_HSH_DAT(0x8000000000000000ULL, 2); + CVMX_MT_HSH_DATZ(3); + CVMX_MT_HSH_DATZ(4); + CVMX_MT_HSH_DATZ(5); + CVMX_MT_HSH_DATZ(6); + CVMX_ES64(tmp1, ((64 + 16) << 3)); + CVMX_MT_HSH_STARTMD5(tmp1); + + /* save the HMAC */ + SG_INIT(sg, data32, data_i, data_l); + while (icv_off > 0) { + SG_CONSUME(sg, data32, data_i, data_l); + icv_off -= 4; + } + CVMX_MF_HSH_IV(tmp1, 0); + *data32 = (uint32_t) (tmp1 >> 32); + SG_CONSUME(sg, data32, data_i, data_l); + *data32 = (uint32_t) tmp1; + SG_CONSUME(sg, data32, data_i, data_l); + CVMX_MF_HSH_IV(tmp1, 1); + *data32 = (uint32_t) (tmp1 >> 32); + + octeon_crypto_disable(&state, flags); + return 0; +} + +/****************************************************************************/ +/* DES SHA */ + +int +octo_des_cbc_sha1_encrypt( + struct octo_sess *od, + struct scatterlist *sg, int sg_len, + int auth_off, int auth_len, + int crypt_off, int crypt_len, + int icv_off, uint8_t *ivp) +{ + register int next = 0; + union { + uint32_t data32[2]; + uint64_t data64[1]; + } mydata; + uint64_t *data = &mydata.data64[0]; + uint32_t *data32; + uint64_t tmp1, tmp2, tmp3; + int data_i, data_l, alen = auth_len; + struct octeon_cop2_state state; + unsigned long flags; + + dprintk("%s()\n", __FUNCTION__); + + if (unlikely(od == NULL || sg==NULL || sg_len==0 || ivp==NULL || + (crypt_off & 0x3) || (crypt_off + crypt_len > sg_len) || + (crypt_len & 0x7) || + (auth_len & 0x7) || + (auth_off & 0x3) || (auth_off + auth_len > sg_len))) { + dprintk("%s: Bad parameters od=%p sg=%p sg_len=%d " + "auth_off=%d auth_len=%d crypt_off=%d crypt_len=%d " + "icv_off=%d ivp=%p\n", __FUNCTION__, od, sg, sg_len, + auth_off, auth_len, crypt_off, crypt_len, icv_off, ivp); + return -EINVAL; + } + + SG_INIT(sg, data32, data_i, data_l); + + CVMX_PREFETCH0(ivp); + CVMX_PREFETCH0(od->octo_enckey); + + flags = octeon_crypto_enable(&state); + + /* load 3DES Key */ + CVMX_MT_3DES_KEY(((uint64_t *) od->octo_enckey)[0], 0); + if (od->octo_encklen == 24) { + CVMX_MT_3DES_KEY(((uint64_t *) od->octo_enckey)[1], 1); + CVMX_MT_3DES_KEY(((uint64_t *) od->octo_enckey)[2], 2); + } else if (od->octo_encklen == 8) { + CVMX_MT_3DES_KEY(((uint64_t *) od->octo_enckey)[0], 1); + CVMX_MT_3DES_KEY(((uint64_t *) od->octo_enckey)[0], 2); + } else { + octeon_crypto_disable(&state, flags); + dprintk("%s: Bad key length %d\n", __FUNCTION__, od->octo_encklen); + return -EINVAL; + } + + CVMX_MT_3DES_IV(* (uint64_t *) ivp); + + /* Load SHA1 IV */ + CVMX_MT_HSH_IV(od->octo_hminner[0], 0); + CVMX_MT_HSH_IV(od->octo_hminner[1], 1); + CVMX_MT_HSH_IV(od->octo_hminner[2], 2); + + while (crypt_off > 0 && auth_off > 0) { + SG_CONSUME(sg, data32, data_i, data_l); + crypt_off -= 4; + auth_off -= 4; + } + + while (crypt_len > 0 || auth_len > 0) { + uint32_t *first = data32; + mydata.data32[0] = *first; + SG_CONSUME(sg, data32, data_i, data_l); + mydata.data32[1] = *data32; + if (crypt_off <= 0) { + if (crypt_len > 0) { + CVMX_MT_3DES_ENC_CBC(*data); + CVMX_MF_3DES_RESULT(*data); + crypt_len -= 8; + } + } else + crypt_off -= 8; + if (auth_off <= 0) { + if (auth_len > 0) { + CVM_LOAD_SHA_UNIT(*data, next); + auth_len -= 8; + } + } else + auth_off -= 8; + *first = mydata.data32[0]; + *data32 = mydata.data32[1]; + SG_CONSUME(sg, data32, data_i, data_l); + } + + /* finish the hash */ + CVMX_PREFETCH0(od->octo_hmouter); +#if 0 + if (unlikely(inplen)) { + uint64_t tmp = 0; + uint8_t *p = (uint8_t *) & tmp; + p[inplen] = 0x80; + do { + inplen--; + p[inplen] = ((uint8_t *) data)[inplen]; + } while (inplen); + CVM_LOAD_SHA_UNIT(tmp, next); + } else { + CVM_LOAD_SHA_UNIT(0x8000000000000000ULL, next); + } +#else + CVM_LOAD_SHA_UNIT(0x8000000000000000ULL, next); +#endif + + /* Finish Inner hash */ + while (next != 7) { + CVM_LOAD_SHA_UNIT(((uint64_t) 0x0ULL), next); + } + CVM_LOAD_SHA_UNIT((uint64_t) ((alen + 64) << 3), next); + + /* Get the inner hash of HMAC */ + CVMX_MF_HSH_IV(tmp1, 0); + CVMX_MF_HSH_IV(tmp2, 1); + tmp3 = 0; + CVMX_MF_HSH_IV(tmp3, 2); + + /* Initialize hash unit */ + CVMX_MT_HSH_IV(od->octo_hmouter[0], 0); + CVMX_MT_HSH_IV(od->octo_hmouter[1], 1); + CVMX_MT_HSH_IV(od->octo_hmouter[2], 2); + + CVMX_MT_HSH_DAT(tmp1, 0); + CVMX_MT_HSH_DAT(tmp2, 1); + tmp3 |= 0x0000000080000000; + CVMX_MT_HSH_DAT(tmp3, 2); + CVMX_MT_HSH_DATZ(3); + CVMX_MT_HSH_DATZ(4); + CVMX_MT_HSH_DATZ(5); + CVMX_MT_HSH_DATZ(6); + CVMX_MT_HSH_STARTSHA((uint64_t) ((64 + 20) << 3)); + + /* save the HMAC */ + SG_INIT(sg, data32, data_i, data_l); + while (icv_off > 0) { + SG_CONSUME(sg, data32, data_i, data_l); + icv_off -= 4; + } + CVMX_MF_HSH_IV(tmp1, 0); + *data32 = (uint32_t) (tmp1 >> 32); + SG_CONSUME(sg, data32, data_i, data_l); + *data32 = (uint32_t) tmp1; + SG_CONSUME(sg, data32, data_i, data_l); + CVMX_MF_HSH_IV(tmp1, 1); + *data32 = (uint32_t) (tmp1 >> 32); + + octeon_crypto_disable(&state, flags); + return 0; +} + +int +octo_des_cbc_sha1_decrypt( + struct octo_sess *od, + struct scatterlist *sg, int sg_len, + int auth_off, int auth_len, + int crypt_off, int crypt_len, + int icv_off, uint8_t *ivp) +{ + register int next = 0; + union { + uint32_t data32[2]; + uint64_t data64[1]; + } mydata; + uint64_t *data = &mydata.data64[0]; + uint32_t *data32; + uint64_t tmp1, tmp2, tmp3; + int data_i, data_l, alen = auth_len; + struct octeon_cop2_state state; + unsigned long flags; + + dprintk("%s()\n", __FUNCTION__); + + if (unlikely(od == NULL || sg==NULL || sg_len==0 || ivp==NULL || + (crypt_off & 0x3) || (crypt_off + crypt_len > sg_len) || + (crypt_len & 0x7) || + (auth_len & 0x7) || + (auth_off & 0x3) || (auth_off + auth_len > sg_len))) { + dprintk("%s: Bad parameters od=%p sg=%p sg_len=%d " + "auth_off=%d auth_len=%d crypt_off=%d crypt_len=%d " + "icv_off=%d ivp=%p\n", __FUNCTION__, od, sg, sg_len, + auth_off, auth_len, crypt_off, crypt_len, icv_off, ivp); + return -EINVAL; + } + + SG_INIT(sg, data32, data_i, data_l); + + CVMX_PREFETCH0(ivp); + CVMX_PREFETCH0(od->octo_enckey); + + flags = octeon_crypto_enable(&state); + + /* load 3DES Key */ + CVMX_MT_3DES_KEY(((uint64_t *) od->octo_enckey)[0], 0); + if (od->octo_encklen == 24) { + CVMX_MT_3DES_KEY(((uint64_t *) od->octo_enckey)[1], 1); + CVMX_MT_3DES_KEY(((uint64_t *) od->octo_enckey)[2], 2); + } else if (od->octo_encklen == 8) { + CVMX_MT_3DES_KEY(((uint64_t *) od->octo_enckey)[0], 1); + CVMX_MT_3DES_KEY(((uint64_t *) od->octo_enckey)[0], 2); + } else { + octeon_crypto_disable(&state, flags); + dprintk("%s: Bad key length %d\n", __FUNCTION__, od->octo_encklen); + return -EINVAL; + } + + CVMX_MT_3DES_IV(* (uint64_t *) ivp); + + /* Load SHA1 IV */ + CVMX_MT_HSH_IV(od->octo_hminner[0], 0); + CVMX_MT_HSH_IV(od->octo_hminner[1], 1); + CVMX_MT_HSH_IV(od->octo_hminner[2], 2); + + while (crypt_off > 0 && auth_off > 0) { + SG_CONSUME(sg, data32, data_i, data_l); + crypt_off -= 4; + auth_off -= 4; + } + + while (crypt_len > 0 || auth_len > 0) { + uint32_t *first = data32; + mydata.data32[0] = *first; + SG_CONSUME(sg, data32, data_i, data_l); + mydata.data32[1] = *data32; + if (auth_off <= 0) { + if (auth_len > 0) { + CVM_LOAD_SHA_UNIT(*data, next); + auth_len -= 8; + } + } else + auth_off -= 8; + if (crypt_off <= 0) { + if (crypt_len > 0) { + CVMX_MT_3DES_DEC_CBC(*data); + CVMX_MF_3DES_RESULT(*data); + crypt_len -= 8; + } + } else + crypt_off -= 8; + *first = mydata.data32[0]; + *data32 = mydata.data32[1]; + SG_CONSUME(sg, data32, data_i, data_l); + } + + /* finish the hash */ + CVMX_PREFETCH0(od->octo_hmouter); +#if 0 + if (unlikely(inplen)) { + uint64_t tmp = 0; + uint8_t *p = (uint8_t *) & tmp; + p[inplen] = 0x80; + do { + inplen--; + p[inplen] = ((uint8_t *) data)[inplen]; + } while (inplen); + CVM_LOAD_SHA_UNIT(tmp, next); + } else { + CVM_LOAD_SHA_UNIT(0x8000000000000000ULL, next); + } +#else + CVM_LOAD_SHA_UNIT(0x8000000000000000ULL, next); +#endif + + /* Finish Inner hash */ + while (next != 7) { + CVM_LOAD_SHA_UNIT(((uint64_t) 0x0ULL), next); + } + CVM_LOAD_SHA_UNIT((uint64_t) ((alen + 64) << 3), next); + + /* Get the inner hash of HMAC */ + CVMX_MF_HSH_IV(tmp1, 0); + CVMX_MF_HSH_IV(tmp2, 1); + tmp3 = 0; + CVMX_MF_HSH_IV(tmp3, 2); + + /* Initialize hash unit */ + CVMX_MT_HSH_IV(od->octo_hmouter[0], 0); + CVMX_MT_HSH_IV(od->octo_hmouter[1], 1); + CVMX_MT_HSH_IV(od->octo_hmouter[2], 2); + + CVMX_MT_HSH_DAT(tmp1, 0); + CVMX_MT_HSH_DAT(tmp2, 1); + tmp3 |= 0x0000000080000000; + CVMX_MT_HSH_DAT(tmp3, 2); + CVMX_MT_HSH_DATZ(3); + CVMX_MT_HSH_DATZ(4); + CVMX_MT_HSH_DATZ(5); + CVMX_MT_HSH_DATZ(6); + CVMX_MT_HSH_STARTSHA((uint64_t) ((64 + 20) << 3)); + /* save the HMAC */ + SG_INIT(sg, data32, data_i, data_l); + while (icv_off > 0) { + SG_CONSUME(sg, data32, data_i, data_l); + icv_off -= 4; + } + CVMX_MF_HSH_IV(tmp1, 0); + *data32 = (uint32_t) (tmp1 >> 32); + SG_CONSUME(sg, data32, data_i, data_l); + *data32 = (uint32_t) tmp1; + SG_CONSUME(sg, data32, data_i, data_l); + CVMX_MF_HSH_IV(tmp1, 1); + *data32 = (uint32_t) (tmp1 >> 32); + + octeon_crypto_disable(&state, flags); + return 0; +} + +/****************************************************************************/ +/* AES MD5 */ + +int +octo_aes_cbc_md5_encrypt( + struct octo_sess *od, + struct scatterlist *sg, int sg_len, + int auth_off, int auth_len, + int crypt_off, int crypt_len, + int icv_off, uint8_t *ivp) +{ + register int next = 0; + union { + uint32_t data32[2]; + uint64_t data64[1]; + } mydata[2]; + uint64_t *pdata = &mydata[0].data64[0]; + uint64_t *data = &mydata[1].data64[0]; + uint32_t *data32; + uint64_t tmp1, tmp2; + int data_i, data_l, alen = auth_len; + struct octeon_cop2_state state; + unsigned long flags; + + dprintk("%s()\n", __FUNCTION__); + + if (unlikely(od == NULL || sg==NULL || sg_len==0 || ivp==NULL || + (crypt_off & 0x3) || (crypt_off + crypt_len > sg_len) || + (crypt_len & 0x7) || + (auth_len & 0x7) || + (auth_off & 0x3) || (auth_off + auth_len > sg_len))) { + dprintk("%s: Bad parameters od=%p sg=%p sg_len=%d " + "auth_off=%d auth_len=%d crypt_off=%d crypt_len=%d " + "icv_off=%d ivp=%p\n", __FUNCTION__, od, sg, sg_len, + auth_off, auth_len, crypt_off, crypt_len, icv_off, ivp); + return -EINVAL; + } + + SG_INIT(sg, data32, data_i, data_l); + + CVMX_PREFETCH0(ivp); + CVMX_PREFETCH0(od->octo_enckey); + + flags = octeon_crypto_enable(&state); + + /* load AES Key */ + CVMX_MT_AES_KEY(((uint64_t *) od->octo_enckey)[0], 0); + CVMX_MT_AES_KEY(((uint64_t *) od->octo_enckey)[1], 1); + + if (od->octo_encklen == 16) { + CVMX_MT_AES_KEY(0x0, 2); + CVMX_MT_AES_KEY(0x0, 3); + } else if (od->octo_encklen == 24) { + CVMX_MT_AES_KEY(((uint64_t *) od->octo_enckey)[2], 2); + CVMX_MT_AES_KEY(0x0, 3); + } else if (od->octo_encklen == 32) { + CVMX_MT_AES_KEY(((uint64_t *) od->octo_enckey)[2], 2); + CVMX_MT_AES_KEY(((uint64_t *) od->octo_enckey)[3], 3); + } else { + octeon_crypto_disable(&state, flags); + dprintk("%s: Bad key length %d\n", __FUNCTION__, od->octo_encklen); + return -EINVAL; + } + CVMX_MT_AES_KEYLENGTH(od->octo_encklen / 8 - 1); + + CVMX_MT_AES_IV(((uint64_t *) ivp)[0], 0); + CVMX_MT_AES_IV(((uint64_t *) ivp)[1], 1); + + /* Load MD5 IV */ + CVMX_MT_HSH_IV(od->octo_hminner[0], 0); + CVMX_MT_HSH_IV(od->octo_hminner[1], 1); + + while (crypt_off > 0 && auth_off > 0) { + SG_CONSUME(sg, data32, data_i, data_l); + crypt_off -= 4; + auth_off -= 4; + } + + /* align auth and crypt */ + while (crypt_off > 0 && auth_len > 0) { + mydata[0].data32[0] = *data32; + SG_CONSUME(sg, data32, data_i, data_l); + mydata[0].data32[1] = *data32; + SG_CONSUME(sg, data32, data_i, data_l); + CVM_LOAD_MD5_UNIT(*pdata, next); + crypt_off -= 8; + auth_len -= 8; + } + + while (crypt_len > 0) { + uint32_t *pdata32[3]; + + pdata32[0] = data32; + mydata[0].data32[0] = *data32; + SG_CONSUME(sg, data32, data_i, data_l); + + pdata32[1] = data32; + mydata[0].data32[1] = *data32; + SG_CONSUME(sg, data32, data_i, data_l); + + pdata32[2] = data32; + mydata[1].data32[0] = *data32; + SG_CONSUME(sg, data32, data_i, data_l); + + mydata[1].data32[1] = *data32; + + CVMX_MT_AES_ENC_CBC0(*pdata); + CVMX_MT_AES_ENC_CBC1(*data); + CVMX_MF_AES_RESULT(*pdata, 0); + CVMX_MF_AES_RESULT(*data, 1); + crypt_len -= 16; + + if (auth_len > 0) { + CVM_LOAD_MD5_UNIT(*pdata, next); + auth_len -= 8; + } + if (auth_len > 0) { + CVM_LOAD_MD5_UNIT(*data, next); + auth_len -= 8; + } + + *pdata32[0] = mydata[0].data32[0]; + *pdata32[1] = mydata[0].data32[1]; + *pdata32[2] = mydata[1].data32[0]; + *data32 = mydata[1].data32[1]; + + SG_CONSUME(sg, data32, data_i, data_l); + } + + /* finish any left over hashing */ + while (auth_len > 0) { + mydata[0].data32[0] = *data32; + SG_CONSUME(sg, data32, data_i, data_l); + mydata[0].data32[1] = *data32; + SG_CONSUME(sg, data32, data_i, data_l); + CVM_LOAD_MD5_UNIT(*pdata, next); + auth_len -= 8; + } + + /* finish the hash */ + CVMX_PREFETCH0(od->octo_hmouter); +#if 0 + if (unlikely(inplen)) { + uint64_t tmp = 0; + uint8_t *p = (uint8_t *) & tmp; + p[inplen] = 0x80; + do { + inplen--; + p[inplen] = ((uint8_t *) data)[inplen]; + } while (inplen); + CVM_LOAD_MD5_UNIT(tmp, next); + } else { + CVM_LOAD_MD5_UNIT(0x8000000000000000ULL, next); + } +#else + CVM_LOAD_MD5_UNIT(0x8000000000000000ULL, next); +#endif + + /* Finish Inner hash */ + while (next != 7) { + CVM_LOAD_MD5_UNIT(((uint64_t) 0x0ULL), next); + } + CVMX_ES64(tmp1, ((alen + 64) << 3)); + CVM_LOAD_MD5_UNIT(tmp1, next); + + /* Get the inner hash of HMAC */ + CVMX_MF_HSH_IV(tmp1, 0); + CVMX_MF_HSH_IV(tmp2, 1); + + /* Initialize hash unit */ + CVMX_MT_HSH_IV(od->octo_hmouter[0], 0); + CVMX_MT_HSH_IV(od->octo_hmouter[1], 1); + + CVMX_MT_HSH_DAT(tmp1, 0); + CVMX_MT_HSH_DAT(tmp2, 1); + CVMX_MT_HSH_DAT(0x8000000000000000ULL, 2); + CVMX_MT_HSH_DATZ(3); + CVMX_MT_HSH_DATZ(4); + CVMX_MT_HSH_DATZ(5); + CVMX_MT_HSH_DATZ(6); + CVMX_ES64(tmp1, ((64 + 16) << 3)); + CVMX_MT_HSH_STARTMD5(tmp1); + + /* save the HMAC */ + SG_INIT(sg, data32, data_i, data_l); + while (icv_off > 0) { + SG_CONSUME(sg, data32, data_i, data_l); + icv_off -= 4; + } + CVMX_MF_HSH_IV(tmp1, 0); + *data32 = (uint32_t) (tmp1 >> 32); + SG_CONSUME(sg, data32, data_i, data_l); + *data32 = (uint32_t) tmp1; + SG_CONSUME(sg, data32, data_i, data_l); + CVMX_MF_HSH_IV(tmp1, 1); + *data32 = (uint32_t) (tmp1 >> 32); + + octeon_crypto_disable(&state, flags); + return 0; +} + +int +octo_aes_cbc_md5_decrypt( + struct octo_sess *od, + struct scatterlist *sg, int sg_len, + int auth_off, int auth_len, + int crypt_off, int crypt_len, + int icv_off, uint8_t *ivp) +{ + register int next = 0; + union { + uint32_t data32[2]; + uint64_t data64[1]; + } mydata[2]; + uint64_t *pdata = &mydata[0].data64[0]; + uint64_t *data = &mydata[1].data64[0]; + uint32_t *data32; + uint64_t tmp1, tmp2; + int data_i, data_l, alen = auth_len; + struct octeon_cop2_state state; + unsigned long flags; + + dprintk("%s()\n", __FUNCTION__); + + if (unlikely(od == NULL || sg==NULL || sg_len==0 || ivp==NULL || + (crypt_off & 0x3) || (crypt_off + crypt_len > sg_len) || + (crypt_len & 0x7) || + (auth_len & 0x7) || + (auth_off & 0x3) || (auth_off + auth_len > sg_len))) { + dprintk("%s: Bad parameters od=%p sg=%p sg_len=%d " + "auth_off=%d auth_len=%d crypt_off=%d crypt_len=%d " + "icv_off=%d ivp=%p\n", __FUNCTION__, od, sg, sg_len, + auth_off, auth_len, crypt_off, crypt_len, icv_off, ivp); + return -EINVAL; + } + + SG_INIT(sg, data32, data_i, data_l); + + CVMX_PREFETCH0(ivp); + CVMX_PREFETCH0(od->octo_enckey); + + flags = octeon_crypto_enable(&state); + + /* load AES Key */ + CVMX_MT_AES_KEY(((uint64_t *) od->octo_enckey)[0], 0); + CVMX_MT_AES_KEY(((uint64_t *) od->octo_enckey)[1], 1); + + if (od->octo_encklen == 16) { + CVMX_MT_AES_KEY(0x0, 2); + CVMX_MT_AES_KEY(0x0, 3); + } else if (od->octo_encklen == 24) { + CVMX_MT_AES_KEY(((uint64_t *) od->octo_enckey)[2], 2); + CVMX_MT_AES_KEY(0x0, 3); + } else if (od->octo_encklen == 32) { + CVMX_MT_AES_KEY(((uint64_t *) od->octo_enckey)[2], 2); + CVMX_MT_AES_KEY(((uint64_t *) od->octo_enckey)[3], 3); + } else { + octeon_crypto_disable(&state, flags); + dprintk("%s: Bad key length %d\n", __FUNCTION__, od->octo_encklen); + return -EINVAL; + } + CVMX_MT_AES_KEYLENGTH(od->octo_encklen / 8 - 1); + + CVMX_MT_AES_IV(((uint64_t *) ivp)[0], 0); + CVMX_MT_AES_IV(((uint64_t *) ivp)[1], 1); + + /* Load MD5 IV */ + CVMX_MT_HSH_IV(od->octo_hminner[0], 0); + CVMX_MT_HSH_IV(od->octo_hminner[1], 1); + + while (crypt_off > 0 && auth_off > 0) { + SG_CONSUME(sg, data32, data_i, data_l); + crypt_off -= 4; + auth_off -= 4; + } + + /* align auth and crypt */ + while (crypt_off > 0 && auth_len > 0) { + mydata[0].data32[0] = *data32; + SG_CONSUME(sg, data32, data_i, data_l); + mydata[0].data32[1] = *data32; + SG_CONSUME(sg, data32, data_i, data_l); + CVM_LOAD_MD5_UNIT(*pdata, next); + crypt_off -= 8; + auth_len -= 8; + } + + while (crypt_len > 0) { + uint32_t *pdata32[3]; + + pdata32[0] = data32; + mydata[0].data32[0] = *data32; + SG_CONSUME(sg, data32, data_i, data_l); + pdata32[1] = data32; + mydata[0].data32[1] = *data32; + SG_CONSUME(sg, data32, data_i, data_l); + pdata32[2] = data32; + mydata[1].data32[0] = *data32; + SG_CONSUME(sg, data32, data_i, data_l); + mydata[1].data32[1] = *data32; + + if (auth_len > 0) { + CVM_LOAD_MD5_UNIT(*pdata, next); + auth_len -= 8; + } + + if (auth_len > 0) { + CVM_LOAD_MD5_UNIT(*data, next); + auth_len -= 8; + } + + CVMX_MT_AES_DEC_CBC0(*pdata); + CVMX_MT_AES_DEC_CBC1(*data); + CVMX_MF_AES_RESULT(*pdata, 0); + CVMX_MF_AES_RESULT(*data, 1); + crypt_len -= 16; + + *pdata32[0] = mydata[0].data32[0]; + *pdata32[1] = mydata[0].data32[1]; + *pdata32[2] = mydata[1].data32[0]; + *data32 = mydata[1].data32[1]; + + SG_CONSUME(sg, data32, data_i, data_l); + } + + /* finish left over hash if any */ + while (auth_len > 0) { + mydata[0].data32[0] = *data32; + SG_CONSUME(sg, data32, data_i, data_l); + mydata[0].data32[1] = *data32; + SG_CONSUME(sg, data32, data_i, data_l); + CVM_LOAD_MD5_UNIT(*pdata, next); + auth_len -= 8; + } + + + /* finish the hash */ + CVMX_PREFETCH0(od->octo_hmouter); +#if 0 + if (unlikely(inplen)) { + uint64_t tmp = 0; + uint8_t *p = (uint8_t *) & tmp; + p[inplen] = 0x80; + do { + inplen--; + p[inplen] = ((uint8_t *) data)[inplen]; + } while (inplen); + CVM_LOAD_MD5_UNIT(tmp, next); + } else { + CVM_LOAD_MD5_UNIT(0x8000000000000000ULL, next); + } +#else + CVM_LOAD_MD5_UNIT(0x8000000000000000ULL, next); +#endif + + /* Finish Inner hash */ + while (next != 7) { + CVM_LOAD_MD5_UNIT(((uint64_t) 0x0ULL), next); + } + CVMX_ES64(tmp1, ((alen + 64) << 3)); + CVM_LOAD_MD5_UNIT(tmp1, next); + + /* Get the inner hash of HMAC */ + CVMX_MF_HSH_IV(tmp1, 0); + CVMX_MF_HSH_IV(tmp2, 1); + + /* Initialize hash unit */ + CVMX_MT_HSH_IV(od->octo_hmouter[0], 0); + CVMX_MT_HSH_IV(od->octo_hmouter[1], 1); + + CVMX_MT_HSH_DAT(tmp1, 0); + CVMX_MT_HSH_DAT(tmp2, 1); + CVMX_MT_HSH_DAT(0x8000000000000000ULL, 2); + CVMX_MT_HSH_DATZ(3); + CVMX_MT_HSH_DATZ(4); + CVMX_MT_HSH_DATZ(5); + CVMX_MT_HSH_DATZ(6); + CVMX_ES64(tmp1, ((64 + 16) << 3)); + CVMX_MT_HSH_STARTMD5(tmp1); + + /* save the HMAC */ + SG_INIT(sg, data32, data_i, data_l); + while (icv_off > 0) { + SG_CONSUME(sg, data32, data_i, data_l); + icv_off -= 4; + } + CVMX_MF_HSH_IV(tmp1, 0); + *data32 = (uint32_t) (tmp1 >> 32); + SG_CONSUME(sg, data32, data_i, data_l); + *data32 = (uint32_t) tmp1; + SG_CONSUME(sg, data32, data_i, data_l); + CVMX_MF_HSH_IV(tmp1, 1); + *data32 = (uint32_t) (tmp1 >> 32); + + octeon_crypto_disable(&state, flags); + return 0; +} + +/****************************************************************************/ +/* AES SHA1 */ + +int +octo_aes_cbc_sha1_encrypt( + struct octo_sess *od, + struct scatterlist *sg, int sg_len, + int auth_off, int auth_len, + int crypt_off, int crypt_len, + int icv_off, uint8_t *ivp) +{ + register int next = 0; + union { + uint32_t data32[2]; + uint64_t data64[1]; + } mydata[2]; + uint64_t *pdata = &mydata[0].data64[0]; + uint64_t *data = &mydata[1].data64[0]; + uint32_t *data32; + uint64_t tmp1, tmp2, tmp3; + int data_i, data_l, alen = auth_len; + struct octeon_cop2_state state; + unsigned long flags; + + dprintk("%s(a_off=%d a_len=%d c_off=%d c_len=%d icv_off=%d)\n", + __FUNCTION__, auth_off, auth_len, crypt_off, crypt_len, icv_off); + + if (unlikely(od == NULL || sg==NULL || sg_len==0 || ivp==NULL || + (crypt_off & 0x3) || (crypt_off + crypt_len > sg_len) || + (crypt_len & 0x7) || + (auth_len & 0x7) || + (auth_off & 0x3) || (auth_off + auth_len > sg_len))) { + dprintk("%s: Bad parameters od=%p sg=%p sg_len=%d " + "auth_off=%d auth_len=%d crypt_off=%d crypt_len=%d " + "icv_off=%d ivp=%p\n", __FUNCTION__, od, sg, sg_len, + auth_off, auth_len, crypt_off, crypt_len, icv_off, ivp); + return -EINVAL; + } + + SG_INIT(sg, data32, data_i, data_l); + + CVMX_PREFETCH0(ivp); + CVMX_PREFETCH0(od->octo_enckey); + + flags = octeon_crypto_enable(&state); + + /* load AES Key */ + CVMX_MT_AES_KEY(((uint64_t *) od->octo_enckey)[0], 0); + CVMX_MT_AES_KEY(((uint64_t *) od->octo_enckey)[1], 1); + + if (od->octo_encklen == 16) { + CVMX_MT_AES_KEY(0x0, 2); + CVMX_MT_AES_KEY(0x0, 3); + } else if (od->octo_encklen == 24) { + CVMX_MT_AES_KEY(((uint64_t *) od->octo_enckey)[2], 2); + CVMX_MT_AES_KEY(0x0, 3); + } else if (od->octo_encklen == 32) { + CVMX_MT_AES_KEY(((uint64_t *) od->octo_enckey)[2], 2); + CVMX_MT_AES_KEY(((uint64_t *) od->octo_enckey)[3], 3); + } else { + octeon_crypto_disable(&state, flags); + dprintk("%s: Bad key length %d\n", __FUNCTION__, od->octo_encklen); + return -EINVAL; + } + CVMX_MT_AES_KEYLENGTH(od->octo_encklen / 8 - 1); + + CVMX_MT_AES_IV(((uint64_t *) ivp)[0], 0); + CVMX_MT_AES_IV(((uint64_t *) ivp)[1], 1); + + /* Load SHA IV */ + CVMX_MT_HSH_IV(od->octo_hminner[0], 0); + CVMX_MT_HSH_IV(od->octo_hminner[1], 1); + CVMX_MT_HSH_IV(od->octo_hminner[2], 2); + + while (crypt_off > 0 && auth_off > 0) { + SG_CONSUME(sg, data32, data_i, data_l); + crypt_off -= 4; + auth_off -= 4; + } + + /* align auth and crypt */ + while (crypt_off > 0 && auth_len > 0) { + mydata[0].data32[0] = *data32; + SG_CONSUME(sg, data32, data_i, data_l); + mydata[0].data32[1] = *data32; + SG_CONSUME(sg, data32, data_i, data_l); + CVM_LOAD_SHA_UNIT(*pdata, next); + crypt_off -= 8; + auth_len -= 8; + } + + while (crypt_len > 0) { + uint32_t *pdata32[3]; + + pdata32[0] = data32; + mydata[0].data32[0] = *data32; + SG_CONSUME(sg, data32, data_i, data_l); + pdata32[1] = data32; + mydata[0].data32[1] = *data32; + SG_CONSUME(sg, data32, data_i, data_l); + pdata32[2] = data32; + mydata[1].data32[0] = *data32; + SG_CONSUME(sg, data32, data_i, data_l); + mydata[1].data32[1] = *data32; + + CVMX_MT_AES_ENC_CBC0(*pdata); + CVMX_MT_AES_ENC_CBC1(*data); + CVMX_MF_AES_RESULT(*pdata, 0); + CVMX_MF_AES_RESULT(*data, 1); + crypt_len -= 16; + + if (auth_len > 0) { + CVM_LOAD_SHA_UNIT(*pdata, next); + auth_len -= 8; + } + if (auth_len > 0) { + CVM_LOAD_SHA_UNIT(*data, next); + auth_len -= 8; + } + + *pdata32[0] = mydata[0].data32[0]; + *pdata32[1] = mydata[0].data32[1]; + *pdata32[2] = mydata[1].data32[0]; + *data32 = mydata[1].data32[1]; + + SG_CONSUME(sg, data32, data_i, data_l); + } + + /* finish and hashing */ + while (auth_len > 0) { + mydata[0].data32[0] = *data32; + SG_CONSUME(sg, data32, data_i, data_l); + mydata[0].data32[1] = *data32; + SG_CONSUME(sg, data32, data_i, data_l); + CVM_LOAD_SHA_UNIT(*pdata, next); + auth_len -= 8; + } + + /* finish the hash */ + CVMX_PREFETCH0(od->octo_hmouter); +#if 0 + if (unlikely(inplen)) { + uint64_t tmp = 0; + uint8_t *p = (uint8_t *) & tmp; + p[inplen] = 0x80; + do { + inplen--; + p[inplen] = ((uint8_t *) data)[inplen]; + } while (inplen); + CVM_LOAD_SHA_UNIT(tmp, next); + } else { + CVM_LOAD_SHA_UNIT(0x8000000000000000ULL, next); + } +#else + CVM_LOAD_SHA_UNIT(0x8000000000000000ULL, next); +#endif + + /* Finish Inner hash */ + while (next != 7) { + CVM_LOAD_SHA_UNIT(((uint64_t) 0x0ULL), next); + } + CVM_LOAD_SHA_UNIT((uint64_t) ((alen + 64) << 3), next); + + /* Get the inner hash of HMAC */ + CVMX_MF_HSH_IV(tmp1, 0); + CVMX_MF_HSH_IV(tmp2, 1); + tmp3 = 0; + CVMX_MF_HSH_IV(tmp3, 2); + + /* Initialize hash unit */ + CVMX_MT_HSH_IV(od->octo_hmouter[0], 0); + CVMX_MT_HSH_IV(od->octo_hmouter[1], 1); + CVMX_MT_HSH_IV(od->octo_hmouter[2], 2); + + CVMX_MT_HSH_DAT(tmp1, 0); + CVMX_MT_HSH_DAT(tmp2, 1); + tmp3 |= 0x0000000080000000; + CVMX_MT_HSH_DAT(tmp3, 2); + CVMX_MT_HSH_DATZ(3); + CVMX_MT_HSH_DATZ(4); + CVMX_MT_HSH_DATZ(5); + CVMX_MT_HSH_DATZ(6); + CVMX_MT_HSH_STARTSHA((uint64_t) ((64 + 20) << 3)); + + /* finish the hash */ + CVMX_PREFETCH0(od->octo_hmouter); +#if 0 + if (unlikely(inplen)) { + uint64_t tmp = 0; + uint8_t *p = (uint8_t *) & tmp; + p[inplen] = 0x80; + do { + inplen--; + p[inplen] = ((uint8_t *) data)[inplen]; + } while (inplen); + CVM_LOAD_MD5_UNIT(tmp, next); + } else { + CVM_LOAD_MD5_UNIT(0x8000000000000000ULL, next); + } +#else + CVM_LOAD_MD5_UNIT(0x8000000000000000ULL, next); +#endif + + /* save the HMAC */ + SG_INIT(sg, data32, data_i, data_l); + while (icv_off > 0) { + SG_CONSUME(sg, data32, data_i, data_l); + icv_off -= 4; + } + CVMX_MF_HSH_IV(tmp1, 0); + *data32 = (uint32_t) (tmp1 >> 32); + SG_CONSUME(sg, data32, data_i, data_l); + *data32 = (uint32_t) tmp1; + SG_CONSUME(sg, data32, data_i, data_l); + CVMX_MF_HSH_IV(tmp1, 1); + *data32 = (uint32_t) (tmp1 >> 32); + + octeon_crypto_disable(&state, flags); + return 0; +} + +int +octo_aes_cbc_sha1_decrypt( + struct octo_sess *od, + struct scatterlist *sg, int sg_len, + int auth_off, int auth_len, + int crypt_off, int crypt_len, + int icv_off, uint8_t *ivp) +{ + register int next = 0; + union { + uint32_t data32[2]; + uint64_t data64[1]; + } mydata[2]; + uint64_t *pdata = &mydata[0].data64[0]; + uint64_t *data = &mydata[1].data64[0]; + uint32_t *data32; + uint64_t tmp1, tmp2, tmp3; + int data_i, data_l, alen = auth_len; + struct octeon_cop2_state state; + unsigned long flags; + + dprintk("%s(a_off=%d a_len=%d c_off=%d c_len=%d icv_off=%d)\n", + __FUNCTION__, auth_off, auth_len, crypt_off, crypt_len, icv_off); + + if (unlikely(od == NULL || sg==NULL || sg_len==0 || ivp==NULL || + (crypt_off & 0x3) || (crypt_off + crypt_len > sg_len) || + (crypt_len & 0x7) || + (auth_len & 0x7) || + (auth_off & 0x3) || (auth_off + auth_len > sg_len))) { + dprintk("%s: Bad parameters od=%p sg=%p sg_len=%d " + "auth_off=%d auth_len=%d crypt_off=%d crypt_len=%d " + "icv_off=%d ivp=%p\n", __FUNCTION__, od, sg, sg_len, + auth_off, auth_len, crypt_off, crypt_len, icv_off, ivp); + return -EINVAL; + } + + SG_INIT(sg, data32, data_i, data_l); + + CVMX_PREFETCH0(ivp); + CVMX_PREFETCH0(od->octo_enckey); + + flags = octeon_crypto_enable(&state); + + /* load AES Key */ + CVMX_MT_AES_KEY(((uint64_t *) od->octo_enckey)[0], 0); + CVMX_MT_AES_KEY(((uint64_t *) od->octo_enckey)[1], 1); + + if (od->octo_encklen == 16) { + CVMX_MT_AES_KEY(0x0, 2); + CVMX_MT_AES_KEY(0x0, 3); + } else if (od->octo_encklen == 24) { + CVMX_MT_AES_KEY(((uint64_t *) od->octo_enckey)[2], 2); + CVMX_MT_AES_KEY(0x0, 3); + } else if (od->octo_encklen == 32) { + CVMX_MT_AES_KEY(((uint64_t *) od->octo_enckey)[2], 2); + CVMX_MT_AES_KEY(((uint64_t *) od->octo_enckey)[3], 3); + } else { + octeon_crypto_disable(&state, flags); + dprintk("%s: Bad key length %d\n", __FUNCTION__, od->octo_encklen); + return -EINVAL; + } + CVMX_MT_AES_KEYLENGTH(od->octo_encklen / 8 - 1); + + CVMX_MT_AES_IV(((uint64_t *) ivp)[0], 0); + CVMX_MT_AES_IV(((uint64_t *) ivp)[1], 1); + + /* Load SHA1 IV */ + CVMX_MT_HSH_IV(od->octo_hminner[0], 0); + CVMX_MT_HSH_IV(od->octo_hminner[1], 1); + CVMX_MT_HSH_IV(od->octo_hminner[2], 2); + + while (crypt_off > 0 && auth_off > 0) { + SG_CONSUME(sg, data32, data_i, data_l); + crypt_off -= 4; + auth_off -= 4; + } + + /* align auth and crypt */ + while (crypt_off > 0 && auth_len > 0) { + mydata[0].data32[0] = *data32; + SG_CONSUME(sg, data32, data_i, data_l); + mydata[0].data32[1] = *data32; + SG_CONSUME(sg, data32, data_i, data_l); + CVM_LOAD_SHA_UNIT(*pdata, next); + crypt_off -= 8; + auth_len -= 8; + } + + while (crypt_len > 0) { + uint32_t *pdata32[3]; + + pdata32[0] = data32; + mydata[0].data32[0] = *data32; + SG_CONSUME(sg, data32, data_i, data_l); + pdata32[1] = data32; + mydata[0].data32[1] = *data32; + SG_CONSUME(sg, data32, data_i, data_l); + pdata32[2] = data32; + mydata[1].data32[0] = *data32; + SG_CONSUME(sg, data32, data_i, data_l); + mydata[1].data32[1] = *data32; + + if (auth_len > 0) { + CVM_LOAD_SHA_UNIT(*pdata, next); + auth_len -= 8; + } + if (auth_len > 0) { + CVM_LOAD_SHA_UNIT(*data, next); + auth_len -= 8; + } + + CVMX_MT_AES_DEC_CBC0(*pdata); + CVMX_MT_AES_DEC_CBC1(*data); + CVMX_MF_AES_RESULT(*pdata, 0); + CVMX_MF_AES_RESULT(*data, 1); + crypt_len -= 16; + + *pdata32[0] = mydata[0].data32[0]; + *pdata32[1] = mydata[0].data32[1]; + *pdata32[2] = mydata[1].data32[0]; + *data32 = mydata[1].data32[1]; + + SG_CONSUME(sg, data32, data_i, data_l); + } + + /* finish and leftover hashing */ + while (auth_len > 0) { + mydata[0].data32[0] = *data32; + SG_CONSUME(sg, data32, data_i, data_l); + mydata[0].data32[1] = *data32; + SG_CONSUME(sg, data32, data_i, data_l); + CVM_LOAD_SHA_UNIT(*pdata, next); + auth_len -= 8; + } + + /* finish the hash */ + CVMX_PREFETCH0(od->octo_hmouter); +#if 0 + if (unlikely(inplen)) { + uint64_t tmp = 0; + uint8_t *p = (uint8_t *) & tmp; + p[inplen] = 0x80; + do { + inplen--; + p[inplen] = ((uint8_t *) data)[inplen]; + } while (inplen); + CVM_LOAD_SHA_UNIT(tmp, next); + } else { + CVM_LOAD_SHA_UNIT(0x8000000000000000ULL, next); + } +#else + CVM_LOAD_SHA_UNIT(0x8000000000000000ULL, next); +#endif + + /* Finish Inner hash */ + while (next != 7) { + CVM_LOAD_SHA_UNIT(((uint64_t) 0x0ULL), next); + } + CVM_LOAD_SHA_UNIT((uint64_t) ((alen + 64) << 3), next); + + /* Get the inner hash of HMAC */ + CVMX_MF_HSH_IV(tmp1, 0); + CVMX_MF_HSH_IV(tmp2, 1); + tmp3 = 0; + CVMX_MF_HSH_IV(tmp3, 2); + + /* Initialize hash unit */ + CVMX_MT_HSH_IV(od->octo_hmouter[0], 0); + CVMX_MT_HSH_IV(od->octo_hmouter[1], 1); + CVMX_MT_HSH_IV(od->octo_hmouter[2], 2); + + CVMX_MT_HSH_DAT(tmp1, 0); + CVMX_MT_HSH_DAT(tmp2, 1); + tmp3 |= 0x0000000080000000; + CVMX_MT_HSH_DAT(tmp3, 2); + CVMX_MT_HSH_DATZ(3); + CVMX_MT_HSH_DATZ(4); + CVMX_MT_HSH_DATZ(5); + CVMX_MT_HSH_DATZ(6); + CVMX_MT_HSH_STARTSHA((uint64_t) ((64 + 20) << 3)); + + /* finish the hash */ + CVMX_PREFETCH0(od->octo_hmouter); +#if 0 + if (unlikely(inplen)) { + uint64_t tmp = 0; + uint8_t *p = (uint8_t *) & tmp; + p[inplen] = 0x80; + do { + inplen--; + p[inplen] = ((uint8_t *) data)[inplen]; + } while (inplen); + CVM_LOAD_MD5_UNIT(tmp, next); + } else { + CVM_LOAD_MD5_UNIT(0x8000000000000000ULL, next); + } +#else + CVM_LOAD_MD5_UNIT(0x8000000000000000ULL, next); +#endif + + /* save the HMAC */ + SG_INIT(sg, data32, data_i, data_l); + while (icv_off > 0) { + SG_CONSUME(sg, data32, data_i, data_l); + icv_off -= 4; + } + CVMX_MF_HSH_IV(tmp1, 0); + *data32 = (uint32_t) (tmp1 >> 32); + SG_CONSUME(sg, data32, data_i, data_l); + *data32 = (uint32_t) tmp1; + SG_CONSUME(sg, data32, data_i, data_l); + CVMX_MF_HSH_IV(tmp1, 1); + *data32 = (uint32_t) (tmp1 >> 32); + + octeon_crypto_disable(&state, flags); + return 0; +} + +/****************************************************************************/ diff --git a/target/linux/generic-2.4/files/crypto/ocf/cryptocteon/cryptocteon.c b/target/linux/generic-2.4/files/crypto/ocf/cryptocteon/cryptocteon.c new file mode 100644 index 0000000000..9940f59a9a --- /dev/null +++ b/target/linux/generic-2.4/files/crypto/ocf/cryptocteon/cryptocteon.c @@ -0,0 +1,574 @@ +/* + * Octeon Crypto for OCF + * + * Written by David McCullough + * Copyright (C) 2009-2010 David McCullough + * + * LICENSE TERMS + * + * The free distribution and use of this software in both source and binary + * form is allowed (with or without changes) provided that: + * + * 1. distributions of this source code include the above copyright + * notice, this list of conditions and the following disclaimer; + * + * 2. distributions in binary form include the above copyright + * notice, this list of conditions and the following disclaimer + * in the documentation and/or other associated materials; + * + * 3. the copyright holder's name is not used to endorse products + * built using this software without specific written permission. + * + * DISCLAIMER + * + * This software is provided 'as is' with no explicit or implied warranties + * in respect of its properties, including, but not limited to, correctness + * and/or fitness for purpose. + * --------------------------------------------------------------------------- + */ + +#ifndef AUTOCONF_INCLUDED +#include +#endif +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include + +struct { + softc_device_decl sc_dev; +} octo_softc; + +#define offset_in_page(p) ((unsigned long)(p) & ~PAGE_MASK) + +struct octo_sess { + int octo_encalg; + #define MAX_CIPHER_KEYLEN 64 + char octo_enckey[MAX_CIPHER_KEYLEN]; + int octo_encklen; + + int octo_macalg; + #define MAX_HASH_KEYLEN 64 + char octo_mackey[MAX_HASH_KEYLEN]; + int octo_macklen; + int octo_mackey_set; + + int octo_mlen; + int octo_ivsize; + +#if 0 + int (*octo_decrypt)(struct scatterlist *sg, int sg_len, + uint8_t *key, int key_len, uint8_t * iv, + uint64_t *hminner, uint64_t *hmouter); + + int (*octo_encrypt)(struct scatterlist *sg, int sg_len, + uint8_t *key, int key_len, uint8_t * iv, + uint64_t *hminner, uint64_t *hmouter); +#else + int (*octo_encrypt)(struct octo_sess *od, + struct scatterlist *sg, int sg_len, + int auth_off, int auth_len, + int crypt_off, int crypt_len, + int icv_off, uint8_t *ivp); + int (*octo_decrypt)(struct octo_sess *od, + struct scatterlist *sg, int sg_len, + int auth_off, int auth_len, + int crypt_off, int crypt_len, + int icv_off, uint8_t *ivp); +#endif + + uint64_t octo_hminner[3]; + uint64_t octo_hmouter[3]; +}; + +int32_t octo_id = -1; +module_param(octo_id, int, 0444); +MODULE_PARM_DESC(octo_id, "Read-Only OCF ID for cryptocteon driver"); + +static struct octo_sess **octo_sessions = NULL; +static u_int32_t octo_sesnum = 0; + +static int octo_process(device_t, struct cryptop *, int); +static int octo_newsession(device_t, u_int32_t *, struct cryptoini *); +static int octo_freesession(device_t, u_int64_t); + +static device_method_t octo_methods = { + /* crypto device methods */ + DEVMETHOD(cryptodev_newsession, octo_newsession), + DEVMETHOD(cryptodev_freesession,octo_freesession), + DEVMETHOD(cryptodev_process, octo_process), +}; + +#define debug octo_debug +int octo_debug = 0; +module_param(octo_debug, int, 0644); +MODULE_PARM_DESC(octo_debug, "Enable debug"); + + +#include "cavium_crypto.c" + + +/* + * Generate a new octo session. We artifically limit it to a single + * hash/cipher or hash-cipher combo just to make it easier, most callers + * do not expect more than this anyway. + */ +static int +octo_newsession(device_t dev, u_int32_t *sid, struct cryptoini *cri) +{ + struct cryptoini *c, *encini = NULL, *macini = NULL; + struct octo_sess **ocd; + int i; + + dprintk("%s()\n", __FUNCTION__); + if (sid == NULL || cri == NULL) { + dprintk("%s,%d - EINVAL\n", __FILE__, __LINE__); + return EINVAL; + } + + /* + * To keep it simple, we only handle hash, cipher or hash/cipher in a + * session, you cannot currently do multiple ciphers/hashes in one + * session even though it would be possibel to code this driver to + * handle it. + */ + for (i = 0, c = cri; c && i < 2; i++) { + if (c->cri_alg == CRYPTO_MD5_HMAC || + c->cri_alg == CRYPTO_SHA1_HMAC || + c->cri_alg == CRYPTO_NULL_HMAC) { + if (macini) { + break; + } + macini = c; + } + if (c->cri_alg == CRYPTO_DES_CBC || + c->cri_alg == CRYPTO_3DES_CBC || + c->cri_alg == CRYPTO_AES_CBC || + c->cri_alg == CRYPTO_NULL_CBC) { + if (encini) { + break; + } + encini = c; + } + c = c->cri_next; + } + if (!macini && !encini) { + dprintk("%s,%d - EINVAL bad cipher/hash or combination\n", + __FILE__, __LINE__); + return EINVAL; + } + if (c) { + dprintk("%s,%d - EINVAL cannot handle chained cipher/hash combos\n", + __FILE__, __LINE__); + return EINVAL; + } + + /* + * So we have something we can do, lets setup the session + */ + + if (octo_sessions) { + for (i = 1; i < octo_sesnum; i++) + if (octo_sessions[i] == NULL) + break; + } else + i = 1; /* NB: to silence compiler warning */ + + if (octo_sessions == NULL || i == octo_sesnum) { + if (octo_sessions == NULL) { + i = 1; /* We leave octo_sessions[0] empty */ + octo_sesnum = CRYPTO_SW_SESSIONS; + } else + octo_sesnum *= 2; + + ocd = kmalloc(octo_sesnum * sizeof(struct octo_sess *), SLAB_ATOMIC); + if (ocd == NULL) { + /* Reset session number */ + if (octo_sesnum == CRYPTO_SW_SESSIONS) + octo_sesnum = 0; + else + octo_sesnum /= 2; + dprintk("%s,%d: ENOBUFS\n", __FILE__, __LINE__); + return ENOBUFS; + } + memset(ocd, 0, octo_sesnum * sizeof(struct octo_sess *)); + + /* Copy existing sessions */ + if (octo_sessions) { + memcpy(ocd, octo_sessions, + (octo_sesnum / 2) * sizeof(struct octo_sess *)); + kfree(octo_sessions); + } + + octo_sessions = ocd; + } + + ocd = &octo_sessions[i]; + *sid = i; + + + *ocd = (struct octo_sess *) kmalloc(sizeof(struct octo_sess), SLAB_ATOMIC); + if (*ocd == NULL) { + octo_freesession(NULL, i); + dprintk("%s,%d: ENOBUFS\n", __FILE__, __LINE__); + return ENOBUFS; + } + memset(*ocd, 0, sizeof(struct octo_sess)); + + if (encini && encini->cri_key) { + (*ocd)->octo_encklen = (encini->cri_klen + 7) / 8; + memcpy((*ocd)->octo_enckey, encini->cri_key, (*ocd)->octo_encklen); + } + + if (macini && macini->cri_key) { + (*ocd)->octo_macklen = (macini->cri_klen + 7) / 8; + memcpy((*ocd)->octo_mackey, macini->cri_key, (*ocd)->octo_macklen); + } + + (*ocd)->octo_mlen = 0; + if (encini && encini->cri_mlen) + (*ocd)->octo_mlen = encini->cri_mlen; + else if (macini && macini->cri_mlen) + (*ocd)->octo_mlen = macini->cri_mlen; + else + (*ocd)->octo_mlen = 12; + + /* + * point c at the enc if it exists, otherwise the mac + */ + c = encini ? encini : macini; + + switch (c->cri_alg) { + case CRYPTO_DES_CBC: + case CRYPTO_3DES_CBC: + (*ocd)->octo_ivsize = 8; + switch (macini ? macini->cri_alg : -1) { + case CRYPTO_MD5_HMAC: + (*ocd)->octo_encrypt = octo_des_cbc_md5_encrypt; + (*ocd)->octo_decrypt = octo_des_cbc_md5_decrypt; + octo_calc_hash(0, macini->cri_key, (*ocd)->octo_hminner, + (*ocd)->octo_hmouter); + break; + case CRYPTO_SHA1_HMAC: + (*ocd)->octo_encrypt = octo_des_cbc_sha1_encrypt; + (*ocd)->octo_decrypt = octo_des_cbc_sha1_encrypt; + octo_calc_hash(1, macini->cri_key, (*ocd)->octo_hminner, + (*ocd)->octo_hmouter); + break; + case -1: + (*ocd)->octo_encrypt = octo_des_cbc_encrypt; + (*ocd)->octo_decrypt = octo_des_cbc_decrypt; + break; + default: + octo_freesession(NULL, i); + dprintk("%s,%d: EINVALn", __FILE__, __LINE__); + return EINVAL; + } + break; + case CRYPTO_AES_CBC: + (*ocd)->octo_ivsize = 16; + switch (macini ? macini->cri_alg : -1) { + case CRYPTO_MD5_HMAC: + (*ocd)->octo_encrypt = octo_aes_cbc_md5_encrypt; + (*ocd)->octo_decrypt = octo_aes_cbc_md5_decrypt; + octo_calc_hash(0, macini->cri_key, (*ocd)->octo_hminner, + (*ocd)->octo_hmouter); + break; + case CRYPTO_SHA1_HMAC: + (*ocd)->octo_encrypt = octo_aes_cbc_sha1_encrypt; + (*ocd)->octo_decrypt = octo_aes_cbc_sha1_decrypt; + octo_calc_hash(1, macini->cri_key, (*ocd)->octo_hminner, + (*ocd)->octo_hmouter); + break; + case -1: + (*ocd)->octo_encrypt = octo_aes_cbc_encrypt; + (*ocd)->octo_decrypt = octo_aes_cbc_decrypt; + break; + default: + octo_freesession(NULL, i); + dprintk("%s,%d: EINVALn", __FILE__, __LINE__); + return EINVAL; + } + break; + case CRYPTO_MD5_HMAC: + (*ocd)->octo_encrypt = octo_null_md5_encrypt; + (*ocd)->octo_decrypt = octo_null_md5_encrypt; + octo_calc_hash(0, macini->cri_key, (*ocd)->octo_hminner, + (*ocd)->octo_hmouter); + break; + case CRYPTO_SHA1_HMAC: + (*ocd)->octo_encrypt = octo_null_sha1_encrypt; + (*ocd)->octo_decrypt = octo_null_sha1_encrypt; + octo_calc_hash(1, macini->cri_key, (*ocd)->octo_hminner, + (*ocd)->octo_hmouter); + break; + default: + octo_freesession(NULL, i); + dprintk("%s,%d: EINVALn", __FILE__, __LINE__); + return EINVAL; + } + + (*ocd)->octo_encalg = encini ? encini->cri_alg : -1; + (*ocd)->octo_macalg = macini ? macini->cri_alg : -1; + + return 0; +} + +/* + * Free a session. + */ +static int +octo_freesession(device_t dev, u_int64_t tid) +{ + u_int32_t sid = CRYPTO_SESID2LID(tid); + + dprintk("%s()\n", __FUNCTION__); + if (sid > octo_sesnum || octo_sessions == NULL || + octo_sessions[sid] == NULL) { + dprintk("%s,%d: EINVAL\n", __FILE__, __LINE__); + return(EINVAL); + } + + /* Silently accept and return */ + if (sid == 0) + return(0); + + if (octo_sessions[sid]) + kfree(octo_sessions[sid]); + octo_sessions[sid] = NULL; + return 0; +} + +/* + * Process a request. + */ +static int +octo_process(device_t dev, struct cryptop *crp, int hint) +{ + struct cryptodesc *crd; + struct octo_sess *od; + u_int32_t lid; +#define SCATTERLIST_MAX 16 + struct scatterlist sg[SCATTERLIST_MAX]; + int sg_num, sg_len; + struct sk_buff *skb = NULL; + struct uio *uiop = NULL; + struct cryptodesc *enccrd = NULL, *maccrd = NULL; + unsigned char *ivp = NULL; + unsigned char iv_data[HASH_MAX_LEN]; + int auth_off = 0, auth_len = 0, crypt_off = 0, crypt_len = 0, icv_off = 0; + + dprintk("%s()\n", __FUNCTION__); + /* Sanity check */ + if (crp == NULL) { + dprintk("%s,%d: EINVAL\n", __FILE__, __LINE__); + return EINVAL; + } + + crp->crp_etype = 0; + + if (crp->crp_desc == NULL || crp->crp_buf == NULL) { + dprintk("%s,%d: EINVAL\n", __FILE__, __LINE__); + crp->crp_etype = EINVAL; + goto done; + } + + lid = crp->crp_sid & 0xffffffff; + if (lid >= octo_sesnum || lid == 0 || octo_sessions == NULL || + octo_sessions[lid] == NULL) { + crp->crp_etype = ENOENT; + dprintk("%s,%d: ENOENT\n", __FILE__, __LINE__); + goto done; + } + od = octo_sessions[lid]; + + /* + * do some error checking outside of the loop for SKB and IOV processing + * this leaves us with valid skb or uiop pointers for later + */ + if (crp->crp_flags & CRYPTO_F_SKBUF) { + skb = (struct sk_buff *) crp->crp_buf; + if (skb_shinfo(skb)->nr_frags >= SCATTERLIST_MAX) { + printk("%s,%d: %d nr_frags > SCATTERLIST_MAX", __FILE__, __LINE__, + skb_shinfo(skb)->nr_frags); + goto done; + } + } else if (crp->crp_flags & CRYPTO_F_IOV) { + uiop = (struct uio *) crp->crp_buf; + if (uiop->uio_iovcnt > SCATTERLIST_MAX) { + printk("%s,%d: %d uio_iovcnt > SCATTERLIST_MAX", __FILE__, __LINE__, + uiop->uio_iovcnt); + goto done; + } + } + + /* point our enccrd and maccrd appropriately */ + crd = crp->crp_desc; + if (crd->crd_alg == od->octo_encalg) enccrd = crd; + if (crd->crd_alg == od->octo_macalg) maccrd = crd; + crd = crd->crd_next; + if (crd) { + if (crd->crd_alg == od->octo_encalg) enccrd = crd; + if (crd->crd_alg == od->octo_macalg) maccrd = crd; + crd = crd->crd_next; + } + if (crd) { + crp->crp_etype = EINVAL; + dprintk("%s,%d: ENOENT - descriptors do not match session\n", + __FILE__, __LINE__); + goto done; + } + + if (enccrd) { + if (enccrd->crd_flags & CRD_F_IV_EXPLICIT) { + ivp = enccrd->crd_iv; + } else { + ivp = iv_data; + crypto_copydata(crp->crp_flags, crp->crp_buf, + enccrd->crd_inject, od->octo_ivsize, (caddr_t) ivp); + } + + if (maccrd) { + auth_off = maccrd->crd_skip; + auth_len = maccrd->crd_len; + icv_off = maccrd->crd_inject; + } + + crypt_off = enccrd->crd_skip; + crypt_len = enccrd->crd_len; + } else { /* if (maccrd) */ + auth_off = maccrd->crd_skip; + auth_len = maccrd->crd_len; + icv_off = maccrd->crd_inject; + } + + + /* + * setup the SG list to cover the buffer + */ + memset(sg, 0, sizeof(sg)); + if (crp->crp_flags & CRYPTO_F_SKBUF) { + int i, len; + + sg_num = 0; + sg_len = 0; + + len = skb_headlen(skb); + sg_set_page(&sg[sg_num], virt_to_page(skb->data), len, + offset_in_page(skb->data)); + sg_len += len; + sg_num++; + + for (i = 0; i < skb_shinfo(skb)->nr_frags && sg_num < SCATTERLIST_MAX; + i++) { + len = skb_shinfo(skb)->frags[i].size; + sg_set_page(&sg[sg_num], skb_shinfo(skb)->frags[i].page, + len, skb_shinfo(skb)->frags[i].page_offset); + sg_len += len; + sg_num++; + } + } else if (crp->crp_flags & CRYPTO_F_IOV) { + int len; + + sg_len = 0; + for (sg_num = 0; sg_len < crp->crp_ilen && + sg_num < uiop->uio_iovcnt && + sg_num < SCATTERLIST_MAX; sg_num++) { + len = uiop->uio_iov[sg_num].iov_len; + sg_set_page(&sg[sg_num], + virt_to_page(uiop->uio_iov[sg_num].iov_base), len, + offset_in_page(uiop->uio_iov[sg_num].iov_base)); + sg_len += len; + } + } else { + sg_len = crp->crp_ilen; + sg_set_page(&sg[0], virt_to_page(crp->crp_buf), sg_len, + offset_in_page(crp->crp_buf)); + sg_num = 1; + } + + + /* + * setup a new explicit key + */ + if (enccrd) { + if (enccrd->crd_flags & CRD_F_KEY_EXPLICIT) { + od->octo_encklen = (enccrd->crd_klen + 7) / 8; + memcpy(od->octo_enckey, enccrd->crd_key, od->octo_encklen); + } + } + if (maccrd) { + if (maccrd->crd_flags & CRD_F_KEY_EXPLICIT) { + od->octo_macklen = (maccrd->crd_klen + 7) / 8; + memcpy(od->octo_mackey, maccrd->crd_key, od->octo_macklen); + od->octo_mackey_set = 0; + } + if (!od->octo_mackey_set) { + octo_calc_hash(maccrd->crd_alg == CRYPTO_MD5_HMAC ? 0 : 1, + maccrd->crd_key, od->octo_hminner, od->octo_hmouter); + od->octo_mackey_set = 1; + } + } + + + if (!enccrd || (enccrd->crd_flags & CRD_F_ENCRYPT)) + (*od->octo_encrypt)(od, sg, sg_len, + auth_off, auth_len, crypt_off, crypt_len, icv_off, ivp); + else + (*od->octo_decrypt)(od, sg, sg_len, + auth_off, auth_len, crypt_off, crypt_len, icv_off, ivp); + +done: + crypto_done(crp); + return 0; +} + +static int +cryptocteon_init(void) +{ + dprintk("%s(%p)\n", __FUNCTION__, cryptocteon_init); + + softc_device_init(&octo_softc, "cryptocteon", 0, octo_methods); + + octo_id = crypto_get_driverid(softc_get_device(&octo_softc), + CRYPTOCAP_F_HARDWARE | CRYPTOCAP_F_SYNC); + if (octo_id < 0) { + printk("Cryptocteon device cannot initialize!"); + return -ENODEV; + } + + crypto_register(octo_id, CRYPTO_MD5_HMAC, 0,0); + crypto_register(octo_id, CRYPTO_SHA1_HMAC, 0,0); + //crypto_register(octo_id, CRYPTO_MD5, 0,0); + //crypto_register(octo_id, CRYPTO_SHA1, 0,0); + crypto_register(octo_id, CRYPTO_DES_CBC, 0,0); + crypto_register(octo_id, CRYPTO_3DES_CBC, 0,0); + crypto_register(octo_id, CRYPTO_AES_CBC, 0,0); + + return(0); +} + +static void +cryptocteon_exit(void) +{ + dprintk("%s()\n", __FUNCTION__); + crypto_unregister_all(octo_id); + octo_id = -1; +} + +module_init(cryptocteon_init); +module_exit(cryptocteon_exit); + +MODULE_LICENSE("BSD"); +MODULE_AUTHOR("David McCullough "); +MODULE_DESCRIPTION("Cryptocteon (OCF module for Cavium OCTEON crypto)"); diff --git a/target/linux/generic-2.4/files/crypto/ocf/cryptodev.c b/target/linux/generic-2.4/files/crypto/ocf/cryptodev.c new file mode 100644 index 0000000000..87a4c379d4 --- /dev/null +++ b/target/linux/generic-2.4/files/crypto/ocf/cryptodev.c @@ -0,0 +1,1061 @@ +/* $OpenBSD: cryptodev.c,v 1.52 2002/06/19 07:22:46 deraadt Exp $ */ + +/*- + * Linux port done by David McCullough + * Copyright (C) 2006-2010 David McCullough + * Copyright (C) 2004-2005 Intel Corporation. + * The license and original author are listed below. + * + * Copyright (c) 2001 Theo de Raadt + * Copyright (c) 2002-2006 Sam Leffler, Errno Consulting + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. The name of the author may not be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR + * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES + * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. + * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * Effort sponsored in part by the Defense Advanced Research Projects + * Agency (DARPA) and Air Force Research Laboratory, Air Force + * Materiel Command, USAF, under agreement number F30602-01-2-0537. + * +__FBSDID("$FreeBSD: src/sys/opencrypto/cryptodev.c,v 1.34 2007/05/09 19:37:02 gnn Exp $"); + */ + +#ifndef AUTOCONF_INCLUDED +#include +#endif +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include + +extern asmlinkage long sys_dup(unsigned int fildes); + +#define debug cryptodev_debug +int cryptodev_debug = 0; +module_param(cryptodev_debug, int, 0644); +MODULE_PARM_DESC(cryptodev_debug, "Enable cryptodev debug"); + +struct csession_info { + u_int16_t blocksize; + u_int16_t minkey, maxkey; + + u_int16_t keysize; + /* u_int16_t hashsize; */ + u_int16_t authsize; + u_int16_t authkey; + /* u_int16_t ctxsize; */ +}; + +struct csession { + struct list_head list; + u_int64_t sid; + u_int32_t ses; + + wait_queue_head_t waitq; + + u_int32_t cipher; + + u_int32_t mac; + + caddr_t key; + int keylen; + u_char tmp_iv[EALG_MAX_BLOCK_LEN]; + + caddr_t mackey; + int mackeylen; + + struct csession_info info; + + struct iovec iovec; + struct uio uio; + int error; +}; + +struct fcrypt { + struct list_head csessions; + int sesn; +}; + +static struct csession *csefind(struct fcrypt *, u_int); +static int csedelete(struct fcrypt *, struct csession *); +static struct csession *cseadd(struct fcrypt *, struct csession *); +static struct csession *csecreate(struct fcrypt *, u_int64_t, + struct cryptoini *crie, struct cryptoini *cria, struct csession_info *); +static int csefree(struct csession *); + +static int cryptodev_op(struct csession *, struct crypt_op *); +static int cryptodev_key(struct crypt_kop *); +static int cryptodev_find(struct crypt_find_op *); + +static int cryptodev_cb(void *); +static int cryptodev_open(struct inode *inode, struct file *filp); + +/* + * Check a crypto identifier to see if it requested + * a valid crid and it's capabilities match. + */ +static int +checkcrid(int crid) +{ + int hid = crid & ~(CRYPTOCAP_F_SOFTWARE | CRYPTOCAP_F_HARDWARE); + int typ = crid & (CRYPTOCAP_F_SOFTWARE | CRYPTOCAP_F_HARDWARE); + int caps = 0; + + /* if the user hasn't selected a driver, then just call newsession */ + if (hid == 0 && typ != 0) + return 0; + + caps = crypto_getcaps(hid); + + /* didn't find anything with capabilities */ + if (caps == 0) { + dprintk("%s: hid=%x typ=%x not matched\n", __FUNCTION__, hid, typ); + return EINVAL; + } + + /* the user didn't specify SW or HW, so the driver is ok */ + if (typ == 0) + return 0; + + /* if the type specified didn't match */ + if (typ != (caps & (CRYPTOCAP_F_SOFTWARE | CRYPTOCAP_F_HARDWARE))) { + dprintk("%s: hid=%x typ=%x caps=%x not matched\n", __FUNCTION__, + hid, typ, caps); + return EINVAL; + } + + return 0; +} + +static int +cryptodev_op(struct csession *cse, struct crypt_op *cop) +{ + struct cryptop *crp = NULL; + struct cryptodesc *crde = NULL, *crda = NULL; + int error = 0; + + dprintk("%s()\n", __FUNCTION__); + if (cop->len > CRYPTO_MAX_DATA_LEN) { + dprintk("%s: %d > %d\n", __FUNCTION__, cop->len, CRYPTO_MAX_DATA_LEN); + return (E2BIG); + } + + if (cse->info.blocksize && (cop->len % cse->info.blocksize) != 0) { + dprintk("%s: blocksize=%d len=%d\n", __FUNCTION__, cse->info.blocksize, + cop->len); + return (EINVAL); + } + + cse->uio.uio_iov = &cse->iovec; + cse->uio.uio_iovcnt = 1; + cse->uio.uio_offset = 0; +#if 0 + cse->uio.uio_resid = cop->len; + cse->uio.uio_segflg = UIO_SYSSPACE; + cse->uio.uio_rw = UIO_WRITE; + cse->uio.uio_td = td; +#endif + cse->uio.uio_iov[0].iov_len = cop->len; + if (cse->info.authsize) + cse->uio.uio_iov[0].iov_len += cse->info.authsize; + cse->uio.uio_iov[0].iov_base = kmalloc(cse->uio.uio_iov[0].iov_len, + GFP_KERNEL); + + if (cse->uio.uio_iov[0].iov_base == NULL) { + dprintk("%s: iov_base kmalloc(%d) failed\n", __FUNCTION__, + (int)cse->uio.uio_iov[0].iov_len); + return (ENOMEM); + } + + crp = crypto_getreq((cse->info.blocksize != 0) + (cse->info.authsize != 0)); + if (crp == NULL) { + dprintk("%s: ENOMEM\n", __FUNCTION__); + error = ENOMEM; + goto bail; + } + + if (cse->info.authsize && cse->info.blocksize) { + if (cop->op == COP_ENCRYPT) { + crde = crp->crp_desc; + crda = crde->crd_next; + } else { + crda = crp->crp_desc; + crde = crda->crd_next; + } + } else if (cse->info.authsize) { + crda = crp->crp_desc; + } else if (cse->info.blocksize) { + crde = crp->crp_desc; + } else { + dprintk("%s: bad request\n", __FUNCTION__); + error = EINVAL; + goto bail; + } + + if ((error = copy_from_user(cse->uio.uio_iov[0].iov_base, cop->src, + cop->len))) { + dprintk("%s: bad copy\n", __FUNCTION__); + goto bail; + } + + if (crda) { + crda->crd_skip = 0; + crda->crd_len = cop->len; + crda->crd_inject = cop->len; + + crda->crd_alg = cse->mac; + crda->crd_key = cse->mackey; + crda->crd_klen = cse->mackeylen * 8; + } + + if (crde) { + if (cop->op == COP_ENCRYPT) + crde->crd_flags |= CRD_F_ENCRYPT; + else + crde->crd_flags &= ~CRD_F_ENCRYPT; + crde->crd_len = cop->len; + crde->crd_inject = 0; + + crde->crd_alg = cse->cipher; + crde->crd_key = cse->key; + crde->crd_klen = cse->keylen * 8; + } + + crp->crp_ilen = cse->uio.uio_iov[0].iov_len; + crp->crp_flags = CRYPTO_F_IOV | CRYPTO_F_CBIMM + | (cop->flags & COP_F_BATCH); + crp->crp_buf = (caddr_t)&cse->uio; + crp->crp_callback = (int (*) (struct cryptop *)) cryptodev_cb; + crp->crp_sid = cse->sid; + crp->crp_opaque = (void *)cse; + + if (cop->iv) { + if (crde == NULL) { + error = EINVAL; + dprintk("%s no crde\n", __FUNCTION__); + goto bail; + } + if (cse->cipher == CRYPTO_ARC4) { /* XXX use flag? */ + error = EINVAL; + dprintk("%s arc4 with IV\n", __FUNCTION__); + goto bail; + } + if ((error = copy_from_user(cse->tmp_iv, cop->iv, + cse->info.blocksize))) { + dprintk("%s bad iv copy\n", __FUNCTION__); + goto bail; + } + memcpy(crde->crd_iv, cse->tmp_iv, cse->info.blocksize); + crde->crd_flags |= CRD_F_IV_EXPLICIT | CRD_F_IV_PRESENT; + crde->crd_skip = 0; + } else if (cse->cipher == CRYPTO_ARC4) { /* XXX use flag? */ + crde->crd_skip = 0; + } else if (crde) { + crde->crd_flags |= CRD_F_IV_PRESENT; + crde->crd_skip = cse->info.blocksize; + crde->crd_len -= cse->info.blocksize; + } + + if (cop->mac && crda == NULL) { + error = EINVAL; + dprintk("%s no crda\n", __FUNCTION__); + goto bail; + } + + /* + * Let the dispatch run unlocked, then, interlock against the + * callback before checking if the operation completed and going + * to sleep. This insures drivers don't inherit our lock which + * results in a lock order reversal between crypto_dispatch forced + * entry and the crypto_done callback into us. + */ + error = crypto_dispatch(crp); + if (error) { + dprintk("%s error in crypto_dispatch\n", __FUNCTION__); + goto bail; + } + + dprintk("%s about to WAIT\n", __FUNCTION__); + /* + * we really need to wait for driver to complete to maintain + * state, luckily interrupts will be remembered + */ + do { + error = wait_event_interruptible(crp->crp_waitq, + ((crp->crp_flags & CRYPTO_F_DONE) != 0)); + /* + * we can't break out of this loop or we will leave behind + * a huge mess, however, staying here means if your driver + * is broken user applications can hang and not be killed. + * The solution, fix your driver :-) + */ + if (error) { + schedule(); + error = 0; + } + } while ((crp->crp_flags & CRYPTO_F_DONE) == 0); + dprintk("%s finished WAITING error=%d\n", __FUNCTION__, error); + + if (crp->crp_etype != 0) { + error = crp->crp_etype; + dprintk("%s error in crp processing\n", __FUNCTION__); + goto bail; + } + + if (cse->error) { + error = cse->error; + dprintk("%s error in cse processing\n", __FUNCTION__); + goto bail; + } + + if (cop->dst && (error = copy_to_user(cop->dst, + cse->uio.uio_iov[0].iov_base, cop->len))) { + dprintk("%s bad dst copy\n", __FUNCTION__); + goto bail; + } + + if (cop->mac && + (error=copy_to_user(cop->mac, + (caddr_t)cse->uio.uio_iov[0].iov_base + cop->len, + cse->info.authsize))) { + dprintk("%s bad mac copy\n", __FUNCTION__); + goto bail; + } + +bail: + if (crp) + crypto_freereq(crp); + if (cse->uio.uio_iov[0].iov_base) + kfree(cse->uio.uio_iov[0].iov_base); + + return (error); +} + +static int +cryptodev_cb(void *op) +{ + struct cryptop *crp = (struct cryptop *) op; + struct csession *cse = (struct csession *)crp->crp_opaque; + int error; + + dprintk("%s()\n", __FUNCTION__); + error = crp->crp_etype; + if (error == EAGAIN) { + crp->crp_flags &= ~CRYPTO_F_DONE; +#ifdef NOTYET + /* + * DAVIDM I am fairly sure that we should turn this into a batch + * request to stop bad karma/lockup, revisit + */ + crp->crp_flags |= CRYPTO_F_BATCH; +#endif + return crypto_dispatch(crp); + } + if (error != 0 || (crp->crp_flags & CRYPTO_F_DONE)) { + cse->error = error; + wake_up_interruptible(&crp->crp_waitq); + } + return (0); +} + +static int +cryptodevkey_cb(void *op) +{ + struct cryptkop *krp = (struct cryptkop *) op; + dprintk("%s()\n", __FUNCTION__); + wake_up_interruptible(&krp->krp_waitq); + return (0); +} + +static int +cryptodev_key(struct crypt_kop *kop) +{ + struct cryptkop *krp = NULL; + int error = EINVAL; + int in, out, size, i; + + dprintk("%s()\n", __FUNCTION__); + if (kop->crk_iparams + kop->crk_oparams > CRK_MAXPARAM) { + dprintk("%s params too big\n", __FUNCTION__); + return (EFBIG); + } + + in = kop->crk_iparams; + out = kop->crk_oparams; + switch (kop->crk_op) { + case CRK_MOD_EXP: + if (in == 3 && out == 1) + break; + return (EINVAL); + case CRK_MOD_EXP_CRT: + if (in == 6 && out == 1) + break; + return (EINVAL); + case CRK_DSA_SIGN: + if (in == 5 && out == 2) + break; + return (EINVAL); + case CRK_DSA_VERIFY: + if (in == 7 && out == 0) + break; + return (EINVAL); + case CRK_DH_COMPUTE_KEY: + if (in == 3 && out == 1) + break; + return (EINVAL); + default: + return (EINVAL); + } + + krp = (struct cryptkop *)kmalloc(sizeof *krp, GFP_KERNEL); + if (!krp) + return (ENOMEM); + bzero(krp, sizeof *krp); + krp->krp_op = kop->crk_op; + krp->krp_status = kop->crk_status; + krp->krp_iparams = kop->crk_iparams; + krp->krp_oparams = kop->crk_oparams; + krp->krp_crid = kop->crk_crid; + krp->krp_status = 0; + krp->krp_flags = CRYPTO_KF_CBIMM; + krp->krp_callback = (int (*) (struct cryptkop *)) cryptodevkey_cb; + init_waitqueue_head(&krp->krp_waitq); + + for (i = 0; i < CRK_MAXPARAM; i++) + krp->krp_param[i].crp_nbits = kop->crk_param[i].crp_nbits; + for (i = 0; i < krp->krp_iparams + krp->krp_oparams; i++) { + size = (krp->krp_param[i].crp_nbits + 7) / 8; + if (size == 0) + continue; + krp->krp_param[i].crp_p = (caddr_t) kmalloc(size, GFP_KERNEL); + if (i >= krp->krp_iparams) + continue; + error = copy_from_user(krp->krp_param[i].crp_p, + kop->crk_param[i].crp_p, size); + if (error) + goto fail; + } + + error = crypto_kdispatch(krp); + if (error) + goto fail; + + do { + error = wait_event_interruptible(krp->krp_waitq, + ((krp->krp_flags & CRYPTO_KF_DONE) != 0)); + /* + * we can't break out of this loop or we will leave behind + * a huge mess, however, staying here means if your driver + * is broken user applications can hang and not be killed. + * The solution, fix your driver :-) + */ + if (error) { + schedule(); + error = 0; + } + } while ((krp->krp_flags & CRYPTO_KF_DONE) == 0); + + dprintk("%s finished WAITING error=%d\n", __FUNCTION__, error); + + kop->crk_crid = krp->krp_crid; /* device that did the work */ + if (krp->krp_status != 0) { + error = krp->krp_status; + goto fail; + } + + for (i = krp->krp_iparams; i < krp->krp_iparams + krp->krp_oparams; i++) { + size = (krp->krp_param[i].crp_nbits + 7) / 8; + if (size == 0) + continue; + error = copy_to_user(kop->crk_param[i].crp_p, krp->krp_param[i].crp_p, + size); + if (error) + goto fail; + } + +fail: + if (krp) { + kop->crk_status = krp->krp_status; + for (i = 0; i < CRK_MAXPARAM; i++) { + if (krp->krp_param[i].crp_p) + kfree(krp->krp_param[i].crp_p); + } + kfree(krp); + } + return (error); +} + +static int +cryptodev_find(struct crypt_find_op *find) +{ + device_t dev; + + if (find->crid != -1) { + dev = crypto_find_device_byhid(find->crid); + if (dev == NULL) + return (ENOENT); + strlcpy(find->name, device_get_nameunit(dev), + sizeof(find->name)); + } else { + find->crid = crypto_find_driver(find->name); + if (find->crid == -1) + return (ENOENT); + } + return (0); +} + +static struct csession * +csefind(struct fcrypt *fcr, u_int ses) +{ + struct csession *cse; + + dprintk("%s()\n", __FUNCTION__); + list_for_each_entry(cse, &fcr->csessions, list) + if (cse->ses == ses) + return (cse); + return (NULL); +} + +static int +csedelete(struct fcrypt *fcr, struct csession *cse_del) +{ + struct csession *cse; + + dprintk("%s()\n", __FUNCTION__); + list_for_each_entry(cse, &fcr->csessions, list) { + if (cse == cse_del) { + list_del(&cse->list); + return (1); + } + } + return (0); +} + +static struct csession * +cseadd(struct fcrypt *fcr, struct csession *cse) +{ + dprintk("%s()\n", __FUNCTION__); + list_add_tail(&cse->list, &fcr->csessions); + cse->ses = fcr->sesn++; + return (cse); +} + +static struct csession * +csecreate(struct fcrypt *fcr, u_int64_t sid, struct cryptoini *crie, + struct cryptoini *cria, struct csession_info *info) +{ + struct csession *cse; + + dprintk("%s()\n", __FUNCTION__); + cse = (struct csession *) kmalloc(sizeof(struct csession), GFP_KERNEL); + if (cse == NULL) + return NULL; + memset(cse, 0, sizeof(struct csession)); + + INIT_LIST_HEAD(&cse->list); + init_waitqueue_head(&cse->waitq); + + cse->key = crie->cri_key; + cse->keylen = crie->cri_klen/8; + cse->mackey = cria->cri_key; + cse->mackeylen = cria->cri_klen/8; + cse->sid = sid; + cse->cipher = crie->cri_alg; + cse->mac = cria->cri_alg; + cse->info = *info; + cseadd(fcr, cse); + return (cse); +} + +static int +csefree(struct csession *cse) +{ + int error; + + dprintk("%s()\n", __FUNCTION__); + error = crypto_freesession(cse->sid); + if (cse->key) + kfree(cse->key); + if (cse->mackey) + kfree(cse->mackey); + kfree(cse); + return(error); +} + +static int +cryptodev_ioctl( + struct inode *inode, + struct file *filp, + unsigned int cmd, + unsigned long arg) +{ + struct cryptoini cria, crie; + struct fcrypt *fcr = filp->private_data; + struct csession *cse; + struct csession_info info; + struct session2_op sop; + struct crypt_op cop; + struct crypt_kop kop; + struct crypt_find_op fop; + u_int64_t sid; + u_int32_t ses = 0; + int feat, fd, error = 0, crid; + mm_segment_t fs; + + dprintk("%s(cmd=%x arg=%lx)\n", __FUNCTION__, cmd, arg); + + switch (cmd) { + + case CRIOGET: { + dprintk("%s(CRIOGET)\n", __FUNCTION__); + fs = get_fs(); + set_fs(get_ds()); + for (fd = 0; fd < files_fdtable(current->files)->max_fds; fd++) + if (files_fdtable(current->files)->fd[fd] == filp) + break; + fd = sys_dup(fd); + set_fs(fs); + put_user(fd, (int *) arg); + return IS_ERR_VALUE(fd) ? fd : 0; + } + +#define CIOCGSESSSTR (cmd == CIOCGSESSION ? "CIOCGSESSION" : "CIOCGSESSION2") + case CIOCGSESSION: + case CIOCGSESSION2: + dprintk("%s(%s)\n", __FUNCTION__, CIOCGSESSSTR); + memset(&crie, 0, sizeof(crie)); + memset(&cria, 0, sizeof(cria)); + memset(&info, 0, sizeof(info)); + memset(&sop, 0, sizeof(sop)); + + if (copy_from_user(&sop, (void*)arg, (cmd == CIOCGSESSION) ? + sizeof(struct session_op) : sizeof(sop))) { + dprintk("%s(%s) - bad copy\n", __FUNCTION__, CIOCGSESSSTR); + error = EFAULT; + goto bail; + } + + switch (sop.cipher) { + case 0: + dprintk("%s(%s) - no cipher\n", __FUNCTION__, CIOCGSESSSTR); + break; + case CRYPTO_NULL_CBC: + info.blocksize = NULL_BLOCK_LEN; + info.minkey = NULL_MIN_KEY_LEN; + info.maxkey = NULL_MAX_KEY_LEN; + break; + case CRYPTO_DES_CBC: + info.blocksize = DES_BLOCK_LEN; + info.minkey = DES_MIN_KEY_LEN; + info.maxkey = DES_MAX_KEY_LEN; + break; + case CRYPTO_3DES_CBC: + info.blocksize = DES3_BLOCK_LEN; + info.minkey = DES3_MIN_KEY_LEN; + info.maxkey = DES3_MAX_KEY_LEN; + break; + case CRYPTO_BLF_CBC: + info.blocksize = BLOWFISH_BLOCK_LEN; + info.minkey = BLOWFISH_MIN_KEY_LEN; + info.maxkey = BLOWFISH_MAX_KEY_LEN; + break; + case CRYPTO_CAST_CBC: + info.blocksize = CAST128_BLOCK_LEN; + info.minkey = CAST128_MIN_KEY_LEN; + info.maxkey = CAST128_MAX_KEY_LEN; + break; + case CRYPTO_SKIPJACK_CBC: + info.blocksize = SKIPJACK_BLOCK_LEN; + info.minkey = SKIPJACK_MIN_KEY_LEN; + info.maxkey = SKIPJACK_MAX_KEY_LEN; + break; + case CRYPTO_AES_CBC: + info.blocksize = AES_BLOCK_LEN; + info.minkey = AES_MIN_KEY_LEN; + info.maxkey = AES_MAX_KEY_LEN; + break; + case CRYPTO_ARC4: + info.blocksize = ARC4_BLOCK_LEN; + info.minkey = ARC4_MIN_KEY_LEN; + info.maxkey = ARC4_MAX_KEY_LEN; + break; + case CRYPTO_CAMELLIA_CBC: + info.blocksize = CAMELLIA_BLOCK_LEN; + info.minkey = CAMELLIA_MIN_KEY_LEN; + info.maxkey = CAMELLIA_MAX_KEY_LEN; + break; + default: + dprintk("%s(%s) - bad cipher\n", __FUNCTION__, CIOCGSESSSTR); + error = EINVAL; + goto bail; + } + + switch (sop.mac) { + case 0: + dprintk("%s(%s) - no mac\n", __FUNCTION__, CIOCGSESSSTR); + break; + case CRYPTO_NULL_HMAC: + info.authsize = NULL_HASH_LEN; + break; + case CRYPTO_MD5: + info.authsize = MD5_HASH_LEN; + break; + case CRYPTO_SHA1: + info.authsize = SHA1_HASH_LEN; + break; + case CRYPTO_SHA2_256: + info.authsize = SHA2_256_HASH_LEN; + break; + case CRYPTO_SHA2_384: + info.authsize = SHA2_384_HASH_LEN; + break; + case CRYPTO_SHA2_512: + info.authsize = SHA2_512_HASH_LEN; + break; + case CRYPTO_RIPEMD160: + info.authsize = RIPEMD160_HASH_LEN; + break; + case CRYPTO_MD5_HMAC: + info.authsize = MD5_HASH_LEN; + info.authkey = 16; + break; + case CRYPTO_SHA1_HMAC: + info.authsize = SHA1_HASH_LEN; + info.authkey = 20; + break; + case CRYPTO_SHA2_256_HMAC: + info.authsize = SHA2_256_HASH_LEN; + info.authkey = 32; + break; + case CRYPTO_SHA2_384_HMAC: + info.authsize = SHA2_384_HASH_LEN; + info.authkey = 48; + break; + case CRYPTO_SHA2_512_HMAC: + info.authsize = SHA2_512_HASH_LEN; + info.authkey = 64; + break; + case CRYPTO_RIPEMD160_HMAC: + info.authsize = RIPEMD160_HASH_LEN; + info.authkey = 20; + break; + default: + dprintk("%s(%s) - bad mac\n", __FUNCTION__, CIOCGSESSSTR); + error = EINVAL; + goto bail; + } + + if (info.blocksize) { + crie.cri_alg = sop.cipher; + crie.cri_klen = sop.keylen * 8; + if ((info.maxkey && sop.keylen > info.maxkey) || + sop.keylen < info.minkey) { + dprintk("%s(%s) - bad key\n", __FUNCTION__, CIOCGSESSSTR); + error = EINVAL; + goto bail; + } + + crie.cri_key = (u_int8_t *) kmalloc(crie.cri_klen/8+1, GFP_KERNEL); + if (copy_from_user(crie.cri_key, sop.key, + crie.cri_klen/8)) { + dprintk("%s(%s) - bad copy\n", __FUNCTION__, CIOCGSESSSTR); + error = EFAULT; + goto bail; + } + if (info.authsize) + crie.cri_next = &cria; + } + + if (info.authsize) { + cria.cri_alg = sop.mac; + cria.cri_klen = sop.mackeylen * 8; + if (info.authkey && sop.mackeylen != info.authkey) { + dprintk("%s(%s) - mackeylen %d != %d\n", __FUNCTION__, + CIOCGSESSSTR, sop.mackeylen, info.authkey); + error = EINVAL; + goto bail; + } + + if (cria.cri_klen) { + cria.cri_key = (u_int8_t *) kmalloc(cria.cri_klen/8,GFP_KERNEL); + if (copy_from_user(cria.cri_key, sop.mackey, + cria.cri_klen / 8)) { + dprintk("%s(%s) - bad copy\n", __FUNCTION__, CIOCGSESSSTR); + error = EFAULT; + goto bail; + } + } + } + + /* NB: CIOGSESSION2 has the crid */ + if (cmd == CIOCGSESSION2) { + crid = sop.crid; + error = checkcrid(crid); + if (error) { + dprintk("%s(%s) - checkcrid %x\n", __FUNCTION__, + CIOCGSESSSTR, error); + goto bail; + } + } else { + /* allow either HW or SW to be used */ + crid = CRYPTOCAP_F_HARDWARE | CRYPTOCAP_F_SOFTWARE; + } + error = crypto_newsession(&sid, (info.blocksize ? &crie : &cria), crid); + if (error) { + dprintk("%s(%s) - newsession %d\n",__FUNCTION__,CIOCGSESSSTR,error); + goto bail; + } + + cse = csecreate(fcr, sid, &crie, &cria, &info); + if (cse == NULL) { + crypto_freesession(sid); + error = EINVAL; + dprintk("%s(%s) - csecreate failed\n", __FUNCTION__, CIOCGSESSSTR); + goto bail; + } + sop.ses = cse->ses; + + if (cmd == CIOCGSESSION2) { + /* return hardware/driver id */ + sop.crid = CRYPTO_SESID2HID(cse->sid); + } + + if (copy_to_user((void*)arg, &sop, (cmd == CIOCGSESSION) ? + sizeof(struct session_op) : sizeof(sop))) { + dprintk("%s(%s) - bad copy\n", __FUNCTION__, CIOCGSESSSTR); + error = EFAULT; + } +bail: + if (error) { + dprintk("%s(%s) - bail %d\n", __FUNCTION__, CIOCGSESSSTR, error); + if (crie.cri_key) + kfree(crie.cri_key); + if (cria.cri_key) + kfree(cria.cri_key); + } + break; + case CIOCFSESSION: + dprintk("%s(CIOCFSESSION)\n", __FUNCTION__); + get_user(ses, (uint32_t*)arg); + cse = csefind(fcr, ses); + if (cse == NULL) { + error = EINVAL; + dprintk("%s(CIOCFSESSION) - Fail %d\n", __FUNCTION__, error); + break; + } + csedelete(fcr, cse); + error = csefree(cse); + break; + case CIOCCRYPT: + dprintk("%s(CIOCCRYPT)\n", __FUNCTION__); + if(copy_from_user(&cop, (void*)arg, sizeof(cop))) { + dprintk("%s(CIOCCRYPT) - bad copy\n", __FUNCTION__); + error = EFAULT; + goto bail; + } + cse = csefind(fcr, cop.ses); + if (cse == NULL) { + error = EINVAL; + dprintk("%s(CIOCCRYPT) - Fail %d\n", __FUNCTION__, error); + break; + } + error = cryptodev_op(cse, &cop); + if(copy_to_user((void*)arg, &cop, sizeof(cop))) { + dprintk("%s(CIOCCRYPT) - bad return copy\n", __FUNCTION__); + error = EFAULT; + goto bail; + } + break; + case CIOCKEY: + case CIOCKEY2: + dprintk("%s(CIOCKEY)\n", __FUNCTION__); + if (!crypto_userasymcrypto) + return (EPERM); /* XXX compat? */ + if(copy_from_user(&kop, (void*)arg, sizeof(kop))) { + dprintk("%s(CIOCKEY) - bad copy\n", __FUNCTION__); + error = EFAULT; + goto bail; + } + if (cmd == CIOCKEY) { + /* NB: crypto core enforces s/w driver use */ + kop.crk_crid = + CRYPTOCAP_F_HARDWARE | CRYPTOCAP_F_SOFTWARE; + } + error = cryptodev_key(&kop); + if(copy_to_user((void*)arg, &kop, sizeof(kop))) { + dprintk("%s(CIOCGKEY) - bad return copy\n", __FUNCTION__); + error = EFAULT; + goto bail; + } + break; + case CIOCASYMFEAT: + dprintk("%s(CIOCASYMFEAT)\n", __FUNCTION__); + if (!crypto_userasymcrypto) { + /* + * NB: if user asym crypto operations are + * not permitted return "no algorithms" + * so well-behaved applications will just + * fallback to doing them in software. + */ + feat = 0; + } else + error = crypto_getfeat(&feat); + if (!error) { + error = copy_to_user((void*)arg, &feat, sizeof(feat)); + } + break; + case CIOCFINDDEV: + if (copy_from_user(&fop, (void*)arg, sizeof(fop))) { + dprintk("%s(CIOCFINDDEV) - bad copy\n", __FUNCTION__); + error = EFAULT; + goto bail; + } + error = cryptodev_find(&fop); + if (copy_to_user((void*)arg, &fop, sizeof(fop))) { + dprintk("%s(CIOCFINDDEV) - bad return copy\n", __FUNCTION__); + error = EFAULT; + goto bail; + } + break; + default: + dprintk("%s(unknown ioctl 0x%x)\n", __FUNCTION__, cmd); + error = EINVAL; + break; + } + return(-error); +} + +#ifdef HAVE_UNLOCKED_IOCTL +static long +cryptodev_unlocked_ioctl( + struct file *filp, + unsigned int cmd, + unsigned long arg) +{ + return cryptodev_ioctl(NULL, filp, cmd, arg); +} +#endif + +static int +cryptodev_open(struct inode *inode, struct file *filp) +{ + struct fcrypt *fcr; + + dprintk("%s()\n", __FUNCTION__); + if (filp->private_data) { + printk("cryptodev: Private data already exists !\n"); + return(0); + } + + fcr = kmalloc(sizeof(*fcr), GFP_KERNEL); + if (!fcr) { + dprintk("%s() - malloc failed\n", __FUNCTION__); + return(-ENOMEM); + } + memset(fcr, 0, sizeof(*fcr)); + + INIT_LIST_HEAD(&fcr->csessions); + filp->private_data = fcr; + return(0); +} + +static int +cryptodev_release(struct inode *inode, struct file *filp) +{ + struct fcrypt *fcr = filp->private_data; + struct csession *cse, *tmp; + + dprintk("%s()\n", __FUNCTION__); + if (!filp) { + printk("cryptodev: No private data on release\n"); + return(0); + } + + list_for_each_entry_safe(cse, tmp, &fcr->csessions, list) { + list_del(&cse->list); + (void)csefree(cse); + } + filp->private_data = NULL; + kfree(fcr); + return(0); +} + +static struct file_operations cryptodev_fops = { + .owner = THIS_MODULE, + .open = cryptodev_open, + .release = cryptodev_release, + .ioctl = cryptodev_ioctl, +#ifdef HAVE_UNLOCKED_IOCTL + .unlocked_ioctl = cryptodev_unlocked_ioctl, +#endif +}; + +static struct miscdevice cryptodev = { + .minor = CRYPTODEV_MINOR, + .name = "crypto", + .fops = &cryptodev_fops, +}; + +static int __init +cryptodev_init(void) +{ + int rc; + + dprintk("%s(%p)\n", __FUNCTION__, cryptodev_init); + rc = misc_register(&cryptodev); + if (rc) { + printk(KERN_ERR "cryptodev: registration of /dev/crypto failed\n"); + return(rc); + } + + return(0); +} + +static void __exit +cryptodev_exit(void) +{ + dprintk("%s()\n", __FUNCTION__); + misc_deregister(&cryptodev); +} + +module_init(cryptodev_init); +module_exit(cryptodev_exit); + +MODULE_LICENSE("BSD"); +MODULE_AUTHOR("David McCullough "); +MODULE_DESCRIPTION("Cryptodev (user interface to OCF)"); diff --git a/target/linux/generic-2.4/files/crypto/ocf/cryptodev.h b/target/linux/generic-2.4/files/crypto/ocf/cryptodev.h new file mode 100644 index 0000000000..60323175f2 --- /dev/null +++ b/target/linux/generic-2.4/files/crypto/ocf/cryptodev.h @@ -0,0 +1,479 @@ +/* $FreeBSD: src/sys/opencrypto/cryptodev.h,v 1.25 2007/05/09 19:37:02 gnn Exp $ */ +/* $OpenBSD: cryptodev.h,v 1.31 2002/06/11 11:14:29 beck Exp $ */ + +/*- + * Linux port done by David McCullough + * Copyright (C) 2006-2010 David McCullough + * Copyright (C) 2004-2005 Intel Corporation. + * The license and original author are listed below. + * + * The author of this code is Angelos D. Keromytis (angelos@cis.upenn.edu) + * Copyright (c) 2002-2006 Sam Leffler, Errno Consulting + * + * This code was written by Angelos D. Keromytis in Athens, Greece, in + * February 2000. Network Security Technologies Inc. (NSTI) kindly + * supported the development of this code. + * + * Copyright (c) 2000 Angelos D. Keromytis + * + * Permission to use, copy, and modify this software with or without fee + * is hereby granted, provided that this entire notice is included in + * all source code copies of any software which is or includes a copy or + * modification of this software. + * + * THIS SOFTWARE IS BEING PROVIDED "AS IS", WITHOUT ANY EXPRESS OR + * IMPLIED WARRANTY. IN PARTICULAR, NONE OF THE AUTHORS MAKES ANY + * REPRESENTATION OR WARRANTY OF ANY KIND CONCERNING THE + * MERCHANTABILITY OF THIS SOFTWARE OR ITS FITNESS FOR ANY PARTICULAR + * PURPOSE. + * + * Copyright (c) 2001 Theo de Raadt + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. The name of the author may not be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR + * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES + * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. + * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * Effort sponsored in part by the Defense Advanced Research Projects + * Agency (DARPA) and Air Force Research Laboratory, Air Force + * Materiel Command, USAF, under agreement number F30602-01-2-0537. + * + */ + +#ifndef _CRYPTO_CRYPTO_H_ +#define _CRYPTO_CRYPTO_H_ + +/* Some initial values */ +#define CRYPTO_DRIVERS_INITIAL 4 +#define CRYPTO_SW_SESSIONS 32 + +/* Hash values */ +#define NULL_HASH_LEN 0 +#define MD5_HASH_LEN 16 +#define SHA1_HASH_LEN 20 +#define RIPEMD160_HASH_LEN 20 +#define SHA2_256_HASH_LEN 32 +#define SHA2_384_HASH_LEN 48 +#define SHA2_512_HASH_LEN 64 +#define MD5_KPDK_HASH_LEN 16 +#define SHA1_KPDK_HASH_LEN 20 +/* Maximum hash algorithm result length */ +#define HASH_MAX_LEN SHA2_512_HASH_LEN /* Keep this updated */ + +/* HMAC values */ +#define NULL_HMAC_BLOCK_LEN 1 +#define MD5_HMAC_BLOCK_LEN 64 +#define SHA1_HMAC_BLOCK_LEN 64 +#define RIPEMD160_HMAC_BLOCK_LEN 64 +#define SHA2_256_HMAC_BLOCK_LEN 64 +#define SHA2_384_HMAC_BLOCK_LEN 128 +#define SHA2_512_HMAC_BLOCK_LEN 128 +/* Maximum HMAC block length */ +#define HMAC_MAX_BLOCK_LEN SHA2_512_HMAC_BLOCK_LEN /* Keep this updated */ +#define HMAC_IPAD_VAL 0x36 +#define HMAC_OPAD_VAL 0x5C + +/* Encryption algorithm block sizes */ +#define NULL_BLOCK_LEN 1 +#define DES_BLOCK_LEN 8 +#define DES3_BLOCK_LEN 8 +#define BLOWFISH_BLOCK_LEN 8 +#define SKIPJACK_BLOCK_LEN 8 +#define CAST128_BLOCK_LEN 8 +#define RIJNDAEL128_BLOCK_LEN 16 +#define AES_BLOCK_LEN RIJNDAEL128_BLOCK_LEN +#define CAMELLIA_BLOCK_LEN 16 +#define ARC4_BLOCK_LEN 1 +#define EALG_MAX_BLOCK_LEN AES_BLOCK_LEN /* Keep this updated */ + +/* Encryption algorithm min and max key sizes */ +#define NULL_MIN_KEY_LEN 0 +#define NULL_MAX_KEY_LEN 0 +#define DES_MIN_KEY_LEN 8 +#define DES_MAX_KEY_LEN 8 +#define DES3_MIN_KEY_LEN 24 +#define DES3_MAX_KEY_LEN 24 +#define BLOWFISH_MIN_KEY_LEN 4 +#define BLOWFISH_MAX_KEY_LEN 56 +#define SKIPJACK_MIN_KEY_LEN 10 +#define SKIPJACK_MAX_KEY_LEN 10 +#define CAST128_MIN_KEY_LEN 5 +#define CAST128_MAX_KEY_LEN 16 +#define RIJNDAEL128_MIN_KEY_LEN 16 +#define RIJNDAEL128_MAX_KEY_LEN 32 +#define AES_MIN_KEY_LEN RIJNDAEL128_MIN_KEY_LEN +#define AES_MAX_KEY_LEN RIJNDAEL128_MAX_KEY_LEN +#define CAMELLIA_MIN_KEY_LEN 16 +#define CAMELLIA_MAX_KEY_LEN 32 +#define ARC4_MIN_KEY_LEN 1 +#define ARC4_MAX_KEY_LEN 256 + +/* Max size of data that can be processed */ +#define CRYPTO_MAX_DATA_LEN 64*1024 - 1 + +#define CRYPTO_ALGORITHM_MIN 1 +#define CRYPTO_DES_CBC 1 +#define CRYPTO_3DES_CBC 2 +#define CRYPTO_BLF_CBC 3 +#define CRYPTO_CAST_CBC 4 +#define CRYPTO_SKIPJACK_CBC 5 +#define CRYPTO_MD5_HMAC 6 +#define CRYPTO_SHA1_HMAC 7 +#define CRYPTO_RIPEMD160_HMAC 8 +#define CRYPTO_MD5_KPDK 9 +#define CRYPTO_SHA1_KPDK 10 +#define CRYPTO_RIJNDAEL128_CBC 11 /* 128 bit blocksize */ +#define CRYPTO_AES_CBC 11 /* 128 bit blocksize -- the same as above */ +#define CRYPTO_ARC4 12 +#define CRYPTO_MD5 13 +#define CRYPTO_SHA1 14 +#define CRYPTO_NULL_HMAC 15 +#define CRYPTO_NULL_CBC 16 +#define CRYPTO_DEFLATE_COMP 17 /* Deflate compression algorithm */ +#define CRYPTO_SHA2_256_HMAC 18 +#define CRYPTO_SHA2_384_HMAC 19 +#define CRYPTO_SHA2_512_HMAC 20 +#define CRYPTO_CAMELLIA_CBC 21 +#define CRYPTO_SHA2_256 22 +#define CRYPTO_SHA2_384 23 +#define CRYPTO_SHA2_512 24 +#define CRYPTO_RIPEMD160 25 +#define CRYPTO_ALGORITHM_MAX 25 /* Keep updated - see below */ + +/* Algorithm flags */ +#define CRYPTO_ALG_FLAG_SUPPORTED 0x01 /* Algorithm is supported */ +#define CRYPTO_ALG_FLAG_RNG_ENABLE 0x02 /* Has HW RNG for DH/DSA */ +#define CRYPTO_ALG_FLAG_DSA_SHA 0x04 /* Can do SHA on msg */ + +/* + * Crypto driver/device flags. They can set in the crid + * parameter when creating a session or submitting a key + * op to affect the device/driver assigned. If neither + * of these are specified then the crid is assumed to hold + * the driver id of an existing (and suitable) device that + * must be used to satisfy the request. + */ +#define CRYPTO_FLAG_HARDWARE 0x01000000 /* hardware accelerated */ +#define CRYPTO_FLAG_SOFTWARE 0x02000000 /* software implementation */ + +/* NB: deprecated */ +struct session_op { + u_int32_t cipher; /* ie. CRYPTO_DES_CBC */ + u_int32_t mac; /* ie. CRYPTO_MD5_HMAC */ + + u_int32_t keylen; /* cipher key */ + caddr_t key; + int mackeylen; /* mac key */ + caddr_t mackey; + + u_int32_t ses; /* returns: session # */ +}; + +struct session2_op { + u_int32_t cipher; /* ie. CRYPTO_DES_CBC */ + u_int32_t mac; /* ie. CRYPTO_MD5_HMAC */ + + u_int32_t keylen; /* cipher key */ + caddr_t key; + int mackeylen; /* mac key */ + caddr_t mackey; + + u_int32_t ses; /* returns: session # */ + int crid; /* driver id + flags (rw) */ + int pad[4]; /* for future expansion */ +}; + +struct crypt_op { + u_int32_t ses; + u_int16_t op; /* i.e. COP_ENCRYPT */ +#define COP_NONE 0 +#define COP_ENCRYPT 1 +#define COP_DECRYPT 2 + u_int16_t flags; +#define COP_F_BATCH 0x0008 /* Batch op if possible */ + u_int len; + caddr_t src, dst; /* become iov[] inside kernel */ + caddr_t mac; /* must be big enough for chosen MAC */ + caddr_t iv; +}; + +/* + * Parameters for looking up a crypto driver/device by + * device name or by id. The latter are returned for + * created sessions (crid) and completed key operations. + */ +struct crypt_find_op { + int crid; /* driver id + flags */ + char name[32]; /* device/driver name */ +}; + +/* bignum parameter, in packed bytes, ... */ +struct crparam { + caddr_t crp_p; + u_int crp_nbits; +}; + +#define CRK_MAXPARAM 8 + +struct crypt_kop { + u_int crk_op; /* ie. CRK_MOD_EXP or other */ + u_int crk_status; /* return status */ + u_short crk_iparams; /* # of input parameters */ + u_short crk_oparams; /* # of output parameters */ + u_int crk_crid; /* NB: only used by CIOCKEY2 (rw) */ + struct crparam crk_param[CRK_MAXPARAM]; +}; +#define CRK_ALGORITM_MIN 0 +#define CRK_MOD_EXP 0 +#define CRK_MOD_EXP_CRT 1 +#define CRK_DSA_SIGN 2 +#define CRK_DSA_VERIFY 3 +#define CRK_DH_COMPUTE_KEY 4 +#define CRK_ALGORITHM_MAX 4 /* Keep updated - see below */ + +#define CRF_MOD_EXP (1 << CRK_MOD_EXP) +#define CRF_MOD_EXP_CRT (1 << CRK_MOD_EXP_CRT) +#define CRF_DSA_SIGN (1 << CRK_DSA_SIGN) +#define CRF_DSA_VERIFY (1 << CRK_DSA_VERIFY) +#define CRF_DH_COMPUTE_KEY (1 << CRK_DH_COMPUTE_KEY) + +/* + * done against open of /dev/crypto, to get a cloned descriptor. + * Please use F_SETFD against the cloned descriptor. + */ +#define CRIOGET _IOWR('c', 100, u_int32_t) +#define CRIOASYMFEAT CIOCASYMFEAT +#define CRIOFINDDEV CIOCFINDDEV + +/* the following are done against the cloned descriptor */ +#define CIOCGSESSION _IOWR('c', 101, struct session_op) +#define CIOCFSESSION _IOW('c', 102, u_int32_t) +#define CIOCCRYPT _IOWR('c', 103, struct crypt_op) +#define CIOCKEY _IOWR('c', 104, struct crypt_kop) +#define CIOCASYMFEAT _IOR('c', 105, u_int32_t) +#define CIOCGSESSION2 _IOWR('c', 106, struct session2_op) +#define CIOCKEY2 _IOWR('c', 107, struct crypt_kop) +#define CIOCFINDDEV _IOWR('c', 108, struct crypt_find_op) + +struct cryptotstat { + struct timespec acc; /* total accumulated time */ + struct timespec min; /* min time */ + struct timespec max; /* max time */ + u_int32_t count; /* number of observations */ +}; + +struct cryptostats { + u_int32_t cs_ops; /* symmetric crypto ops submitted */ + u_int32_t cs_errs; /* symmetric crypto ops that failed */ + u_int32_t cs_kops; /* asymetric/key ops submitted */ + u_int32_t cs_kerrs; /* asymetric/key ops that failed */ + u_int32_t cs_intrs; /* crypto swi thread activations */ + u_int32_t cs_rets; /* crypto return thread activations */ + u_int32_t cs_blocks; /* symmetric op driver block */ + u_int32_t cs_kblocks; /* symmetric op driver block */ + /* + * When CRYPTO_TIMING is defined at compile time and the + * sysctl debug.crypto is set to 1, the crypto system will + * accumulate statistics about how long it takes to process + * crypto requests at various points during processing. + */ + struct cryptotstat cs_invoke; /* crypto_dipsatch -> crypto_invoke */ + struct cryptotstat cs_done; /* crypto_invoke -> crypto_done */ + struct cryptotstat cs_cb; /* crypto_done -> callback */ + struct cryptotstat cs_finis; /* callback -> callback return */ + + u_int32_t cs_drops; /* crypto ops dropped due to congestion */ +}; + +#ifdef __KERNEL__ + +/* Standard initialization structure beginning */ +struct cryptoini { + int cri_alg; /* Algorithm to use */ + int cri_klen; /* Key length, in bits */ + int cri_mlen; /* Number of bytes we want from the + entire hash. 0 means all. */ + caddr_t cri_key; /* key to use */ + u_int8_t cri_iv[EALG_MAX_BLOCK_LEN]; /* IV to use */ + struct cryptoini *cri_next; +}; + +/* Describe boundaries of a single crypto operation */ +struct cryptodesc { + int crd_skip; /* How many bytes to ignore from start */ + int crd_len; /* How many bytes to process */ + int crd_inject; /* Where to inject results, if applicable */ + int crd_flags; + +#define CRD_F_ENCRYPT 0x01 /* Set when doing encryption */ +#define CRD_F_IV_PRESENT 0x02 /* When encrypting, IV is already in + place, so don't copy. */ +#define CRD_F_IV_EXPLICIT 0x04 /* IV explicitly provided */ +#define CRD_F_DSA_SHA_NEEDED 0x08 /* Compute SHA-1 of buffer for DSA */ +#define CRD_F_KEY_EXPLICIT 0x10 /* Key explicitly provided */ +#define CRD_F_COMP 0x0f /* Set when doing compression */ + + struct cryptoini CRD_INI; /* Initialization/context data */ +#define crd_iv CRD_INI.cri_iv +#define crd_key CRD_INI.cri_key +#define crd_alg CRD_INI.cri_alg +#define crd_klen CRD_INI.cri_klen +#define crd_mlen CRD_INI.cri_mlen + + struct cryptodesc *crd_next; +}; + +/* Structure describing complete operation */ +struct cryptop { + struct list_head crp_next; + wait_queue_head_t crp_waitq; + + u_int64_t crp_sid; /* Session ID */ + int crp_ilen; /* Input data total length */ + int crp_olen; /* Result total length */ + + int crp_etype; /* + * Error type (zero means no error). + * All error codes except EAGAIN + * indicate possible data corruption (as in, + * the data have been touched). On all + * errors, the crp_sid may have changed + * (reset to a new one), so the caller + * should always check and use the new + * value on future requests. + */ + int crp_flags; + +#define CRYPTO_F_SKBUF 0x0001 /* Input/output are skbuf chains */ +#define CRYPTO_F_IOV 0x0002 /* Input/output are uio */ +#define CRYPTO_F_REL 0x0004 /* Must return data in same place */ +#define CRYPTO_F_BATCH 0x0008 /* Batch op if possible */ +#define CRYPTO_F_CBIMM 0x0010 /* Do callback immediately */ +#define CRYPTO_F_DONE 0x0020 /* Operation completed */ +#define CRYPTO_F_CBIFSYNC 0x0040 /* Do CBIMM if op is synchronous */ + + caddr_t crp_buf; /* Data to be processed */ + caddr_t crp_opaque; /* Opaque pointer, passed along */ + struct cryptodesc *crp_desc; /* Linked list of processing descriptors */ + + int (*crp_callback)(struct cryptop *); /* Callback function */ +}; + +#define CRYPTO_BUF_CONTIG 0x0 +#define CRYPTO_BUF_IOV 0x1 +#define CRYPTO_BUF_SKBUF 0x2 + +#define CRYPTO_OP_DECRYPT 0x0 +#define CRYPTO_OP_ENCRYPT 0x1 + +/* + * Hints passed to process methods. + */ +#define CRYPTO_HINT_MORE 0x1 /* more ops coming shortly */ + +struct cryptkop { + struct list_head krp_next; + wait_queue_head_t krp_waitq; + + int krp_flags; +#define CRYPTO_KF_DONE 0x0001 /* Operation completed */ +#define CRYPTO_KF_CBIMM 0x0002 /* Do callback immediately */ + + u_int krp_op; /* ie. CRK_MOD_EXP or other */ + u_int krp_status; /* return status */ + u_short krp_iparams; /* # of input parameters */ + u_short krp_oparams; /* # of output parameters */ + u_int krp_crid; /* desired device, etc. */ + u_int32_t krp_hid; + struct crparam krp_param[CRK_MAXPARAM]; /* kvm */ + int (*krp_callback)(struct cryptkop *); +}; + +#include + +/* + * Session ids are 64 bits. The lower 32 bits contain a "local id" which + * is a driver-private session identifier. The upper 32 bits contain a + * "hardware id" used by the core crypto code to identify the driver and + * a copy of the driver's capabilities that can be used by client code to + * optimize operation. + */ +#define CRYPTO_SESID2HID(_sid) (((_sid) >> 32) & 0x00ffffff) +#define CRYPTO_SESID2CAPS(_sid) (((_sid) >> 32) & 0xff000000) +#define CRYPTO_SESID2LID(_sid) (((u_int32_t) (_sid)) & 0xffffffff) + +extern int crypto_newsession(u_int64_t *sid, struct cryptoini *cri, int hard); +extern int crypto_freesession(u_int64_t sid); +#define CRYPTOCAP_F_HARDWARE CRYPTO_FLAG_HARDWARE +#define CRYPTOCAP_F_SOFTWARE CRYPTO_FLAG_SOFTWARE +#define CRYPTOCAP_F_SYNC 0x04000000 /* operates synchronously */ +extern int32_t crypto_get_driverid(device_t dev, int flags); +extern int crypto_find_driver(const char *); +extern device_t crypto_find_device_byhid(int hid); +extern int crypto_getcaps(int hid); +extern int crypto_register(u_int32_t driverid, int alg, u_int16_t maxoplen, + u_int32_t flags); +extern int crypto_kregister(u_int32_t, int, u_int32_t); +extern int crypto_unregister(u_int32_t driverid, int alg); +extern int crypto_unregister_all(u_int32_t driverid); +extern int crypto_dispatch(struct cryptop *crp); +extern int crypto_kdispatch(struct cryptkop *); +#define CRYPTO_SYMQ 0x1 +#define CRYPTO_ASYMQ 0x2 +extern int crypto_unblock(u_int32_t, int); +extern void crypto_done(struct cryptop *crp); +extern void crypto_kdone(struct cryptkop *); +extern int crypto_getfeat(int *); + +extern void crypto_freereq(struct cryptop *crp); +extern struct cryptop *crypto_getreq(int num); + +extern int crypto_usercrypto; /* userland may do crypto requests */ +extern int crypto_userasymcrypto; /* userland may do asym crypto reqs */ +extern int crypto_devallowsoft; /* only use hardware crypto */ + +/* + * random number support, crypto_unregister_all will unregister + */ +extern int crypto_rregister(u_int32_t driverid, + int (*read_random)(void *arg, u_int32_t *buf, int len), void *arg); +extern int crypto_runregister_all(u_int32_t driverid); + +/* + * Crypto-related utility routines used mainly by drivers. + * + * XXX these don't really belong here; but for now they're + * kept apart from the rest of the system. + */ +struct uio; +extern void cuio_copydata(struct uio* uio, int off, int len, caddr_t cp); +extern void cuio_copyback(struct uio* uio, int off, int len, caddr_t cp); +extern struct iovec *cuio_getptr(struct uio *uio, int loc, int *off); + +extern void crypto_copyback(int flags, caddr_t buf, int off, int size, + caddr_t in); +extern void crypto_copydata(int flags, caddr_t buf, int off, int size, + caddr_t out); +extern int crypto_apply(int flags, caddr_t buf, int off, int len, + int (*f)(void *, void *, u_int), void *arg); + +#endif /* __KERNEL__ */ +#endif /* _CRYPTO_CRYPTO_H_ */ diff --git a/target/linux/generic-2.4/files/crypto/ocf/cryptosoft.c b/target/linux/generic-2.4/files/crypto/ocf/cryptosoft.c new file mode 100644 index 0000000000..52e1570fcc --- /dev/null +++ b/target/linux/generic-2.4/files/crypto/ocf/cryptosoft.c @@ -0,0 +1,1210 @@ +/* + * An OCF module that uses the linux kernel cryptoapi, based on the + * original cryptosoft for BSD by Angelos D. Keromytis (angelos@cis.upenn.edu) + * but is mostly unrecognisable, + * + * Written by David McCullough + * Copyright (C) 2004-2010 David McCullough + * Copyright (C) 2004-2005 Intel Corporation. + * + * LICENSE TERMS + * + * The free distribution and use of this software in both source and binary + * form is allowed (with or without changes) provided that: + * + * 1. distributions of this source code include the above copyright + * notice, this list of conditions and the following disclaimer; + * + * 2. distributions in binary form include the above copyright + * notice, this list of conditions and the following disclaimer + * in the documentation and/or other associated materials; + * + * 3. the copyright holder's name is not used to endorse products + * built using this software without specific written permission. + * + * ALTERNATIVELY, provided that this notice is retained in full, this product + * may be distributed under the terms of the GNU General Public License (GPL), + * in which case the provisions of the GPL apply INSTEAD OF those given above. + * + * DISCLAIMER + * + * This software is provided 'as is' with no explicit or implied warranties + * in respect of its properties, including, but not limited to, correctness + * and/or fitness for purpose. + * --------------------------------------------------------------------------- + */ + +#ifndef AUTOCONF_INCLUDED +#include +#endif +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,10) +#include +#endif +#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,29) +#include +#endif + +#include +#include + +struct { + softc_device_decl sc_dev; +} swcr_softc; + +#define offset_in_page(p) ((unsigned long)(p) & ~PAGE_MASK) + +#define SW_TYPE_CIPHER 0x01 +#define SW_TYPE_HMAC 0x02 +#define SW_TYPE_HASH 0x04 +#define SW_TYPE_COMP 0x08 +#define SW_TYPE_BLKCIPHER 0x10 +#define SW_TYPE_ALG_MASK 0x1f + +#define SW_TYPE_ASYNC 0x8000 + +/* We change some of the above if we have an async interface */ + +#define SW_TYPE_ALG_AMASK (SW_TYPE_ALG_MASK | SW_TYPE_ASYNC) + +#define SW_TYPE_ABLKCIPHER (SW_TYPE_BLKCIPHER | SW_TYPE_ASYNC) +#define SW_TYPE_AHASH (SW_TYPE_HASH | SW_TYPE_ASYNC) +#define SW_TYPE_AHMAC (SW_TYPE_HMAC | SW_TYPE_ASYNC) + +#define SCATTERLIST_MAX 16 + +struct swcr_data { + int sw_type; + int sw_alg; + struct crypto_tfm *sw_tfm; + union { + struct { + char *sw_key; + int sw_klen; + int sw_mlen; + } hmac; + void *sw_comp_buf; + } u; + struct swcr_data *sw_next; +}; + +struct swcr_req { + struct swcr_data *sw_head; + struct swcr_data *sw; + struct cryptop *crp; + struct cryptodesc *crd; + struct scatterlist sg[SCATTERLIST_MAX]; + unsigned char iv[EALG_MAX_BLOCK_LEN]; + char result[HASH_MAX_LEN]; + void *crypto_req; +}; + +#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,20) +static kmem_cache_t *swcr_req_cache; +#else +static struct kmem_cache *swcr_req_cache; +#endif + +#ifndef CRYPTO_TFM_MODE_CBC +/* + * As of linux-2.6.21 this is no longer defined, and presumably no longer + * needed to be passed into the crypto core code. + */ +#define CRYPTO_TFM_MODE_CBC 0 +#define CRYPTO_TFM_MODE_ECB 0 +#endif + +#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,19) + /* + * Linux 2.6.19 introduced a new Crypto API, setup macro's to convert new + * API into old API. + */ + + /* Symmetric/Block Cipher */ + struct blkcipher_desc + { + struct crypto_tfm *tfm; + void *info; + }; + #define ecb(X) #X , CRYPTO_TFM_MODE_ECB + #define cbc(X) #X , CRYPTO_TFM_MODE_CBC + #define crypto_has_blkcipher(X, Y, Z) crypto_alg_available(X, 0) + #define crypto_blkcipher_cast(X) X + #define crypto_blkcipher_tfm(X) X + #define crypto_alloc_blkcipher(X, Y, Z) crypto_alloc_tfm(X, mode) + #define crypto_blkcipher_ivsize(X) crypto_tfm_alg_ivsize(X) + #define crypto_blkcipher_blocksize(X) crypto_tfm_alg_blocksize(X) + #define crypto_blkcipher_setkey(X, Y, Z) crypto_cipher_setkey(X, Y, Z) + #define crypto_blkcipher_encrypt_iv(W, X, Y, Z) \ + crypto_cipher_encrypt_iv((W)->tfm, X, Y, Z, (u8 *)((W)->info)) + #define crypto_blkcipher_decrypt_iv(W, X, Y, Z) \ + crypto_cipher_decrypt_iv((W)->tfm, X, Y, Z, (u8 *)((W)->info)) + #define crypto_blkcipher_set_flags(x, y) /* nop */ + + /* Hash/HMAC/Digest */ + struct hash_desc + { + struct crypto_tfm *tfm; + }; + #define hmac(X) #X , 0 + #define crypto_has_hash(X, Y, Z) crypto_alg_available(X, 0) + #define crypto_hash_cast(X) X + #define crypto_hash_tfm(X) X + #define crypto_alloc_hash(X, Y, Z) crypto_alloc_tfm(X, mode) + #define crypto_hash_digestsize(X) crypto_tfm_alg_digestsize(X) + #define crypto_hash_digest(W, X, Y, Z) \ + crypto_digest_digest((W)->tfm, X, sg_num, Z) + + /* Asymmetric Cipher */ + #define crypto_has_cipher(X, Y, Z) crypto_alg_available(X, 0) + + /* Compression */ + #define crypto_has_comp(X, Y, Z) crypto_alg_available(X, 0) + #define crypto_comp_tfm(X) X + #define crypto_comp_cast(X) X + #define crypto_alloc_comp(X, Y, Z) crypto_alloc_tfm(X, mode) + #define plain(X) #X , 0 +#else + #define ecb(X) "ecb(" #X ")" , 0 + #define cbc(X) "cbc(" #X ")" , 0 + #define hmac(X) "hmac(" #X ")" , 0 + #define plain(X) #X , 0 +#endif /* if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,19) */ + +#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,22) +/* no ablkcipher in older kernels */ +#define crypto_alloc_ablkcipher(a,b,c) (NULL) +#define crypto_ablkcipher_tfm(x) ((struct crypto_tfm *)(x)) +#define crypto_ablkcipher_set_flags(a, b) /* nop */ +#define crypto_ablkcipher_setkey(x, y, z) (-EINVAL) +#define crypto_has_ablkcipher(a,b,c) (0) +#else +#define HAVE_ABLKCIPHER +#endif + +#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,32) +/* no ahash in older kernels */ +#define crypto_ahash_tfm(x) ((struct crypto_tfm *)(x)) +#define crypto_alloc_ahash(a,b,c) (NULL) +#define crypto_ahash_digestsize(x) 0 +#else +#define HAVE_AHASH +#endif + +struct crypto_details { + char *alg_name; + int mode; + int sw_type; +}; + +static struct crypto_details crypto_details[] = { + [CRYPTO_DES_CBC] = { cbc(des), SW_TYPE_BLKCIPHER, }, + [CRYPTO_3DES_CBC] = { cbc(des3_ede), SW_TYPE_BLKCIPHER, }, + [CRYPTO_BLF_CBC] = { cbc(blowfish), SW_TYPE_BLKCIPHER, }, + [CRYPTO_CAST_CBC] = { cbc(cast5), SW_TYPE_BLKCIPHER, }, + [CRYPTO_SKIPJACK_CBC] = { cbc(skipjack), SW_TYPE_BLKCIPHER, }, + [CRYPTO_MD5_HMAC] = { hmac(md5), SW_TYPE_HMAC, }, + [CRYPTO_SHA1_HMAC] = { hmac(sha1), SW_TYPE_HMAC, }, + [CRYPTO_RIPEMD160_HMAC] = { hmac(ripemd160), SW_TYPE_HMAC, }, + [CRYPTO_MD5_KPDK] = { plain(md5-kpdk), SW_TYPE_HASH, }, + [CRYPTO_SHA1_KPDK] = { plain(sha1-kpdk), SW_TYPE_HASH, }, + [CRYPTO_AES_CBC] = { cbc(aes), SW_TYPE_BLKCIPHER, }, + [CRYPTO_ARC4] = { ecb(arc4), SW_TYPE_BLKCIPHER, }, + [CRYPTO_MD5] = { plain(md5), SW_TYPE_HASH, }, + [CRYPTO_SHA1] = { plain(sha1), SW_TYPE_HASH, }, + [CRYPTO_NULL_HMAC] = { hmac(digest_null), SW_TYPE_HMAC, }, + [CRYPTO_NULL_CBC] = { cbc(cipher_null), SW_TYPE_BLKCIPHER, }, + [CRYPTO_DEFLATE_COMP] = { plain(deflate), SW_TYPE_COMP, }, + [CRYPTO_SHA2_256_HMAC] = { hmac(sha256), SW_TYPE_HMAC, }, + [CRYPTO_SHA2_384_HMAC] = { hmac(sha384), SW_TYPE_HMAC, }, + [CRYPTO_SHA2_512_HMAC] = { hmac(sha512), SW_TYPE_HMAC, }, + [CRYPTO_CAMELLIA_CBC] = { cbc(camellia), SW_TYPE_BLKCIPHER, }, + [CRYPTO_SHA2_256] = { plain(sha256), SW_TYPE_HASH, }, + [CRYPTO_SHA2_384] = { plain(sha384), SW_TYPE_HASH, }, + [CRYPTO_SHA2_512] = { plain(sha512), SW_TYPE_HASH, }, + [CRYPTO_RIPEMD160] = { plain(ripemd160), SW_TYPE_HASH, }, +}; + +int32_t swcr_id = -1; +module_param(swcr_id, int, 0444); +MODULE_PARM_DESC(swcr_id, "Read-Only OCF ID for cryptosoft driver"); + +int swcr_fail_if_compression_grows = 1; +module_param(swcr_fail_if_compression_grows, int, 0644); +MODULE_PARM_DESC(swcr_fail_if_compression_grows, + "Treat compression that results in more data as a failure"); + +int swcr_no_ahash = 0; +module_param(swcr_no_ahash, int, 0644); +MODULE_PARM_DESC(swcr_no_ahash, + "Do not use async hash/hmac even if available"); + +int swcr_no_ablk = 0; +module_param(swcr_no_ablk, int, 0644); +MODULE_PARM_DESC(swcr_no_ablk, + "Do not use async blk ciphers even if available"); + +static struct swcr_data **swcr_sessions = NULL; +static u_int32_t swcr_sesnum = 0; + +static int swcr_process(device_t, struct cryptop *, int); +static int swcr_newsession(device_t, u_int32_t *, struct cryptoini *); +static int swcr_freesession(device_t, u_int64_t); + +static device_method_t swcr_methods = { + /* crypto device methods */ + DEVMETHOD(cryptodev_newsession, swcr_newsession), + DEVMETHOD(cryptodev_freesession,swcr_freesession), + DEVMETHOD(cryptodev_process, swcr_process), +}; + +#define debug swcr_debug +int swcr_debug = 0; +module_param(swcr_debug, int, 0644); +MODULE_PARM_DESC(swcr_debug, "Enable debug"); + +static void swcr_process_req(struct swcr_req *req); + +/* + * Generate a new software session. + */ +static int +swcr_newsession(device_t dev, u_int32_t *sid, struct cryptoini *cri) +{ + struct swcr_data **swd; + u_int32_t i; + int error; + char *algo; + int mode; + + dprintk("%s()\n", __FUNCTION__); + if (sid == NULL || cri == NULL) { + dprintk("%s,%d - EINVAL\n", __FILE__, __LINE__); + return EINVAL; + } + + if (swcr_sessions) { + for (i = 1; i < swcr_sesnum; i++) + if (swcr_sessions[i] == NULL) + break; + } else + i = 1; /* NB: to silence compiler warning */ + + if (swcr_sessions == NULL || i == swcr_sesnum) { + if (swcr_sessions == NULL) { + i = 1; /* We leave swcr_sessions[0] empty */ + swcr_sesnum = CRYPTO_SW_SESSIONS; + } else + swcr_sesnum *= 2; + + swd = kmalloc(swcr_sesnum * sizeof(struct swcr_data *), SLAB_ATOMIC); + if (swd == NULL) { + /* Reset session number */ + if (swcr_sesnum == CRYPTO_SW_SESSIONS) + swcr_sesnum = 0; + else + swcr_sesnum /= 2; + dprintk("%s,%d: ENOBUFS\n", __FILE__, __LINE__); + return ENOBUFS; + } + memset(swd, 0, swcr_sesnum * sizeof(struct swcr_data *)); + + /* Copy existing sessions */ + if (swcr_sessions) { + memcpy(swd, swcr_sessions, + (swcr_sesnum / 2) * sizeof(struct swcr_data *)); + kfree(swcr_sessions); + } + + swcr_sessions = swd; + } + + swd = &swcr_sessions[i]; + *sid = i; + + while (cri) { + *swd = (struct swcr_data *) kmalloc(sizeof(struct swcr_data), + SLAB_ATOMIC); + if (*swd == NULL) { + swcr_freesession(NULL, i); + dprintk("%s,%d: ENOBUFS\n", __FILE__, __LINE__); + return ENOBUFS; + } + memset(*swd, 0, sizeof(struct swcr_data)); + + if (cri->cri_alg < 0 || + cri->cri_alg>=sizeof(crypto_details)/sizeof(crypto_details[0])){ + printk("cryptosoft: Unknown algorithm 0x%x\n", cri->cri_alg); + swcr_freesession(NULL, i); + return EINVAL; + } + + algo = crypto_details[cri->cri_alg].alg_name; + if (!algo || !*algo) { + printk("cryptosoft: Unsupported algorithm 0x%x\n", cri->cri_alg); + swcr_freesession(NULL, i); + return EINVAL; + } + + mode = crypto_details[cri->cri_alg].mode; + (*swd)->sw_type = crypto_details[cri->cri_alg].sw_type; + (*swd)->sw_alg = cri->cri_alg; + + /* Algorithm specific configuration */ + switch (cri->cri_alg) { + case CRYPTO_NULL_CBC: + cri->cri_klen = 0; /* make it work with crypto API */ + break; + default: + break; + } + + if ((*swd)->sw_type & SW_TYPE_BLKCIPHER) { + dprintk("%s crypto_alloc_*blkcipher(%s, 0x%x)\n", __FUNCTION__, + algo, mode); + + /* try async first */ + (*swd)->sw_tfm = swcr_no_ablk ? NULL : + crypto_ablkcipher_tfm(crypto_alloc_ablkcipher(algo, 0, 0)); + if ((*swd)->sw_tfm) { + dprintk("%s %s cipher is async\n", __FUNCTION__, algo); + (*swd)->sw_type |= SW_TYPE_ASYNC; + } else { + dprintk("%s %s cipher is sync\n", __FUNCTION__, algo); + (*swd)->sw_tfm = crypto_blkcipher_tfm( + crypto_alloc_blkcipher(algo, 0, CRYPTO_ALG_ASYNC)); + } + if (!(*swd)->sw_tfm) { + dprintk("cryptosoft: crypto_alloc_blkcipher failed(%s, 0x%x)\n", + algo,mode); + swcr_freesession(NULL, i); + return EINVAL; + } + + if (debug) { + dprintk("%s key:cri->cri_klen=%d,(cri->cri_klen + 7)/8=%d", + __FUNCTION__, cri->cri_klen, (cri->cri_klen + 7) / 8); + for (i = 0; i < (cri->cri_klen + 7) / 8; i++) + dprintk("%s0x%x", (i % 8) ? " " : "\n ", + cri->cri_key[i] & 0xff); + dprintk("\n"); + } + if ((*swd)->sw_type & SW_TYPE_ASYNC) { + /* OCF doesn't enforce keys */ + crypto_ablkcipher_set_flags( + __crypto_ablkcipher_cast((*swd)->sw_tfm), + CRYPTO_TFM_REQ_WEAK_KEY); + error = crypto_ablkcipher_setkey( + __crypto_ablkcipher_cast((*swd)->sw_tfm), + cri->cri_key, (cri->cri_klen + 7) / 8); + } else { + /* OCF doesn't enforce keys */ + crypto_blkcipher_set_flags( + crypto_blkcipher_cast((*swd)->sw_tfm), + CRYPTO_TFM_REQ_WEAK_KEY); + error = crypto_blkcipher_setkey( + crypto_blkcipher_cast((*swd)->sw_tfm), + cri->cri_key, (cri->cri_klen + 7) / 8); + } + if (error) { + printk("cryptosoft: setkey failed %d (crt_flags=0x%x)\n", error, + (*swd)->sw_tfm->crt_flags); + swcr_freesession(NULL, i); + return error; + } + } else if ((*swd)->sw_type & (SW_TYPE_HMAC | SW_TYPE_HASH)) { + dprintk("%s crypto_alloc_*hash(%s, 0x%x)\n", __FUNCTION__, + algo, mode); + + /* try async first */ + (*swd)->sw_tfm = swcr_no_ahash ? NULL : + crypto_ahash_tfm(crypto_alloc_ahash(algo, 0, 0)); + if ((*swd)->sw_tfm) { + dprintk("%s %s hash is async\n", __FUNCTION__, algo); + (*swd)->sw_type |= SW_TYPE_ASYNC; + } else { + dprintk("%s %s hash is sync\n", __FUNCTION__, algo); + (*swd)->sw_tfm = crypto_hash_tfm( + crypto_alloc_hash(algo, 0, CRYPTO_ALG_ASYNC)); + } + + if (!(*swd)->sw_tfm) { + dprintk("cryptosoft: crypto_alloc_hash failed(%s,0x%x)\n", + algo, mode); + swcr_freesession(NULL, i); + return EINVAL; + } + + (*swd)->u.hmac.sw_klen = (cri->cri_klen + 7) / 8; + (*swd)->u.hmac.sw_key = (char *)kmalloc((*swd)->u.hmac.sw_klen, + SLAB_ATOMIC); + if ((*swd)->u.hmac.sw_key == NULL) { + swcr_freesession(NULL, i); + dprintk("%s,%d: ENOBUFS\n", __FILE__, __LINE__); + return ENOBUFS; + } + memcpy((*swd)->u.hmac.sw_key, cri->cri_key, (*swd)->u.hmac.sw_klen); + if (cri->cri_mlen) { + (*swd)->u.hmac.sw_mlen = cri->cri_mlen; + } else if ((*swd)->sw_type & SW_TYPE_ASYNC) { + (*swd)->u.hmac.sw_mlen = crypto_ahash_digestsize( + __crypto_ahash_cast((*swd)->sw_tfm)); + } else { + (*swd)->u.hmac.sw_mlen = crypto_hash_digestsize( + crypto_hash_cast((*swd)->sw_tfm)); + } + } else if ((*swd)->sw_type & SW_TYPE_COMP) { + (*swd)->sw_tfm = crypto_comp_tfm( + crypto_alloc_comp(algo, 0, CRYPTO_ALG_ASYNC)); + if (!(*swd)->sw_tfm) { + dprintk("cryptosoft: crypto_alloc_comp failed(%s,0x%x)\n", + algo, mode); + swcr_freesession(NULL, i); + return EINVAL; + } + (*swd)->u.sw_comp_buf = kmalloc(CRYPTO_MAX_DATA_LEN, SLAB_ATOMIC); + if ((*swd)->u.sw_comp_buf == NULL) { + swcr_freesession(NULL, i); + dprintk("%s,%d: ENOBUFS\n", __FILE__, __LINE__); + return ENOBUFS; + } + } else { + printk("cryptosoft: Unhandled sw_type %d\n", (*swd)->sw_type); + swcr_freesession(NULL, i); + return EINVAL; + } + + cri = cri->cri_next; + swd = &((*swd)->sw_next); + } + return 0; +} + +/* + * Free a session. + */ +static int +swcr_freesession(device_t dev, u_int64_t tid) +{ + struct swcr_data *swd; + u_int32_t sid = CRYPTO_SESID2LID(tid); + + dprintk("%s()\n", __FUNCTION__); + if (sid > swcr_sesnum || swcr_sessions == NULL || + swcr_sessions[sid] == NULL) { + dprintk("%s,%d: EINVAL\n", __FILE__, __LINE__); + return(EINVAL); + } + + /* Silently accept and return */ + if (sid == 0) + return(0); + + while ((swd = swcr_sessions[sid]) != NULL) { + swcr_sessions[sid] = swd->sw_next; + if (swd->sw_tfm) { + switch (swd->sw_type & SW_TYPE_ALG_AMASK) { +#ifdef HAVE_AHASH + case SW_TYPE_AHMAC: + case SW_TYPE_AHASH: + crypto_free_ahash(__crypto_ahash_cast(swd->sw_tfm)); + break; +#endif +#ifdef HAVE_ABLKCIPHER + case SW_TYPE_ABLKCIPHER: + crypto_free_ablkcipher(__crypto_ablkcipher_cast(swd->sw_tfm)); + break; +#endif + case SW_TYPE_BLKCIPHER: + crypto_free_blkcipher(crypto_blkcipher_cast(swd->sw_tfm)); + break; + case SW_TYPE_HMAC: + case SW_TYPE_HASH: + crypto_free_hash(crypto_hash_cast(swd->sw_tfm)); + break; + case SW_TYPE_COMP: + crypto_free_comp(crypto_comp_cast(swd->sw_tfm)); + default: + crypto_free_tfm(swd->sw_tfm); + break; + } + swd->sw_tfm = NULL; + } + if (swd->sw_type & SW_TYPE_COMP) { + if (swd->u.sw_comp_buf) + kfree(swd->u.sw_comp_buf); + } else { + if (swd->u.hmac.sw_key) + kfree(swd->u.hmac.sw_key); + } + kfree(swd); + } + return 0; +} + +#if defined(HAVE_ABLKCIPHER) || defined(HAVE_AHASH) +/* older kernels had no async interface */ + +static void swcr_process_callback(struct crypto_async_request *creq, int err) +{ + struct swcr_req *req = creq->data; + + dprintk("%s()\n", __FUNCTION__); + if (err) { + if (err == -EINPROGRESS) + return; + dprintk("%s() fail %d\n", __FUNCTION__, -err); + req->crp->crp_etype = -err; + goto done; + } + + switch (req->sw->sw_type & SW_TYPE_ALG_AMASK) { + case SW_TYPE_AHMAC: + case SW_TYPE_AHASH: + crypto_copyback(req->crp->crp_flags, req->crp->crp_buf, + req->crd->crd_inject, req->sw->u.hmac.sw_mlen, req->result); + ahash_request_free(req->crypto_req); + break; + case SW_TYPE_ABLKCIPHER: + ablkcipher_request_free(req->crypto_req); + break; + default: + req->crp->crp_etype = EINVAL; + goto done; + } + + req->crd = req->crd->crd_next; + if (req->crd) { + swcr_process_req(req); + return; + } + +done: + dprintk("%s crypto_done %p\n", __FUNCTION__, req); + crypto_done(req->crp); + kmem_cache_free(swcr_req_cache, req); +} +#endif /* defined(HAVE_ABLKCIPHER) || defined(HAVE_AHASH) */ + + +static void swcr_process_req(struct swcr_req *req) +{ + struct swcr_data *sw; + struct cryptop *crp = req->crp; + struct cryptodesc *crd = req->crd; + struct sk_buff *skb = (struct sk_buff *) crp->crp_buf; + struct uio *uiop = (struct uio *) crp->crp_buf; + int sg_num, sg_len, skip; + + dprintk("%s()\n", __FUNCTION__); + + /* + * Find the crypto context. + * + * XXX Note that the logic here prevents us from having + * XXX the same algorithm multiple times in a session + * XXX (or rather, we can but it won't give us the right + * XXX results). To do that, we'd need some way of differentiating + * XXX between the various instances of an algorithm (so we can + * XXX locate the correct crypto context). + */ + for (sw = req->sw_head; sw && sw->sw_alg != crd->crd_alg; sw = sw->sw_next) + ; + + /* No such context ? */ + if (sw == NULL) { + crp->crp_etype = EINVAL; + dprintk("%s,%d: EINVAL\n", __FILE__, __LINE__); + goto done; + } + + req->sw = sw; + skip = crd->crd_skip; + + /* + * setup the SG list skip from the start of the buffer + */ + memset(req->sg, 0, sizeof(req->sg)); + sg_init_table(req->sg, SCATTERLIST_MAX); + if (crp->crp_flags & CRYPTO_F_SKBUF) { + int i, len; + + sg_num = 0; + sg_len = 0; + + if (skip < skb_headlen(skb)) { + len = skb_headlen(skb) - skip; + if (len + sg_len > crd->crd_len) + len = crd->crd_len - sg_len; + sg_set_page(&req->sg[sg_num], + virt_to_page(skb->data + skip), len, + offset_in_page(skb->data + skip)); + sg_len += len; + sg_num++; + skip = 0; + } else + skip -= skb_headlen(skb); + + for (i = 0; sg_len < crd->crd_len && + i < skb_shinfo(skb)->nr_frags && + sg_num < SCATTERLIST_MAX; i++) { + if (skip < skb_shinfo(skb)->frags[i].size) { + len = skb_shinfo(skb)->frags[i].size - skip; + if (len + sg_len > crd->crd_len) + len = crd->crd_len - sg_len; + sg_set_page(&req->sg[sg_num], + skb_shinfo(skb)->frags[i].page, + len, + skb_shinfo(skb)->frags[i].page_offset + skip); + sg_len += len; + sg_num++; + skip = 0; + } else + skip -= skb_shinfo(skb)->frags[i].size; + } + } else if (crp->crp_flags & CRYPTO_F_IOV) { + int len; + + sg_len = 0; + for (sg_num = 0; sg_len < crd->crd_len && + sg_num < uiop->uio_iovcnt && + sg_num < SCATTERLIST_MAX; sg_num++) { + if (skip <= uiop->uio_iov[sg_num].iov_len) { + len = uiop->uio_iov[sg_num].iov_len - skip; + if (len + sg_len > crd->crd_len) + len = crd->crd_len - sg_len; + sg_set_page(&req->sg[sg_num], + virt_to_page(uiop->uio_iov[sg_num].iov_base+skip), + len, + offset_in_page(uiop->uio_iov[sg_num].iov_base+skip)); + sg_len += len; + skip = 0; + } else + skip -= uiop->uio_iov[sg_num].iov_len; + } + } else { + sg_len = (crp->crp_ilen - skip); + if (sg_len > crd->crd_len) + sg_len = crd->crd_len; + sg_set_page(&req->sg[0], virt_to_page(crp->crp_buf + skip), + sg_len, offset_in_page(crp->crp_buf + skip)); + sg_num = 1; + } + + switch (sw->sw_type & SW_TYPE_ALG_AMASK) { + +#ifdef HAVE_AHASH + case SW_TYPE_AHMAC: + case SW_TYPE_AHASH: + { + int ret; + + /* check we have room for the result */ + if (crp->crp_ilen - crd->crd_inject < sw->u.hmac.sw_mlen) { + dprintk("cryptosoft: EINVAL crp_ilen=%d, len=%d, inject=%d " + "digestsize=%d\n", crp->crp_ilen, crd->crd_skip + sg_len, + crd->crd_inject, sw->u.hmac.sw_mlen); + crp->crp_etype = EINVAL; + goto done; + } + + req->crypto_req = + ahash_request_alloc(__crypto_ahash_cast(sw->sw_tfm),GFP_KERNEL); + if (!req->crypto_req) { + crp->crp_etype = ENOMEM; + dprintk("%s,%d: ENOMEM ahash_request_alloc", __FILE__, __LINE__); + goto done; + } + + ahash_request_set_callback(req->crypto_req, + CRYPTO_TFM_REQ_MAY_BACKLOG, swcr_process_callback, req); + + memset(req->result, 0, sizeof(req->result)); + + if (sw->sw_type & SW_TYPE_AHMAC) + crypto_ahash_setkey(__crypto_ahash_cast(sw->sw_tfm), + sw->u.hmac.sw_key, sw->u.hmac.sw_klen); + ahash_request_set_crypt(req->crypto_req, req->sg, req->result, sg_len); + ret = crypto_ahash_digest(req->crypto_req); + switch (ret) { + case -EINPROGRESS: + case -EBUSY: + return; + default: + case 0: + dprintk("hash OP %s %d\n", ret ? "failed" : "success", ret); + crp->crp_etype = ret; + ahash_request_free(req->crypto_req); + goto done; + } + } break; +#endif /* HAVE_AHASH */ + +#ifdef HAVE_ABLKCIPHER + case SW_TYPE_ABLKCIPHER: { + int ret; + unsigned char *ivp = req->iv; + int ivsize = + crypto_ablkcipher_ivsize(__crypto_ablkcipher_cast(sw->sw_tfm)); + + if (sg_len < crypto_ablkcipher_blocksize( + __crypto_ablkcipher_cast(sw->sw_tfm))) { + crp->crp_etype = EINVAL; + dprintk("%s,%d: EINVAL len %d < %d\n", __FILE__, __LINE__, + sg_len, crypto_ablkcipher_blocksize( + __crypto_ablkcipher_cast(sw->sw_tfm))); + goto done; + } + + if (ivsize > sizeof(req->iv)) { + crp->crp_etype = EINVAL; + dprintk("%s,%d: EINVAL\n", __FILE__, __LINE__); + goto done; + } + + req->crypto_req = ablkcipher_request_alloc( + __crypto_ablkcipher_cast(sw->sw_tfm), GFP_KERNEL); + if (!req->crypto_req) { + crp->crp_etype = ENOMEM; + dprintk("%s,%d: ENOMEM ablkcipher_request_alloc", + __FILE__, __LINE__); + goto done; + } + + ablkcipher_request_set_callback(req->crypto_req, + CRYPTO_TFM_REQ_MAY_BACKLOG, swcr_process_callback, req); + + if (crd->crd_flags & CRD_F_KEY_EXPLICIT) { + int i, error; + + if (debug) { + dprintk("%s key:", __FUNCTION__); + for (i = 0; i < (crd->crd_klen + 7) / 8; i++) + dprintk("%s0x%x", (i % 8) ? " " : "\n ", + crd->crd_key[i] & 0xff); + dprintk("\n"); + } + /* OCF doesn't enforce keys */ + crypto_ablkcipher_set_flags(__crypto_ablkcipher_cast(sw->sw_tfm), + CRYPTO_TFM_REQ_WEAK_KEY); + error = crypto_ablkcipher_setkey( + __crypto_ablkcipher_cast(sw->sw_tfm), crd->crd_key, + (crd->crd_klen + 7) / 8); + if (error) { + dprintk("cryptosoft: setkey failed %d (crt_flags=0x%x)\n", + error, sw->sw_tfm->crt_flags); + crp->crp_etype = -error; + } + } + + if (crd->crd_flags & CRD_F_ENCRYPT) { /* encrypt */ + + if (crd->crd_flags & CRD_F_IV_EXPLICIT) + ivp = crd->crd_iv; + else + get_random_bytes(ivp, ivsize); + /* + * do we have to copy the IV back to the buffer ? + */ + if ((crd->crd_flags & CRD_F_IV_PRESENT) == 0) { + crypto_copyback(crp->crp_flags, crp->crp_buf, + crd->crd_inject, ivsize, (caddr_t)ivp); + } + ablkcipher_request_set_crypt(req->crypto_req, req->sg, req->sg, + sg_len, ivp); + ret = crypto_ablkcipher_encrypt(req->crypto_req); + + } else { /*decrypt */ + + if (crd->crd_flags & CRD_F_IV_EXPLICIT) + ivp = crd->crd_iv; + else + crypto_copydata(crp->crp_flags, crp->crp_buf, + crd->crd_inject, ivsize, (caddr_t)ivp); + ablkcipher_request_set_crypt(req->crypto_req, req->sg, req->sg, + sg_len, ivp); + ret = crypto_ablkcipher_decrypt(req->crypto_req); + } + + switch (ret) { + case -EINPROGRESS: + case -EBUSY: + return; + default: + case 0: + dprintk("crypto OP %s %d\n", ret ? "failed" : "success", ret); + crp->crp_etype = ret; + goto done; + } + } break; +#endif /* HAVE_ABLKCIPHER */ + + case SW_TYPE_BLKCIPHER: { + unsigned char iv[EALG_MAX_BLOCK_LEN]; + unsigned char *ivp = iv; + struct blkcipher_desc desc; + int ivsize = crypto_blkcipher_ivsize(crypto_blkcipher_cast(sw->sw_tfm)); + + if (sg_len < crypto_blkcipher_blocksize( + crypto_blkcipher_cast(sw->sw_tfm))) { + crp->crp_etype = EINVAL; + dprintk("%s,%d: EINVAL len %d < %d\n", __FILE__, __LINE__, + sg_len, crypto_blkcipher_blocksize( + crypto_blkcipher_cast(sw->sw_tfm))); + goto done; + } + + if (ivsize > sizeof(iv)) { + crp->crp_etype = EINVAL; + dprintk("%s,%d: EINVAL\n", __FILE__, __LINE__); + goto done; + } + + if (crd->crd_flags & CRD_F_KEY_EXPLICIT) { + int i, error; + + if (debug) { + dprintk("%s key:", __FUNCTION__); + for (i = 0; i < (crd->crd_klen + 7) / 8; i++) + dprintk("%s0x%x", (i % 8) ? " " : "\n ", + crd->crd_key[i] & 0xff); + dprintk("\n"); + } + /* OCF doesn't enforce keys */ + crypto_blkcipher_set_flags(crypto_blkcipher_cast(sw->sw_tfm), + CRYPTO_TFM_REQ_WEAK_KEY); + error = crypto_blkcipher_setkey( + crypto_blkcipher_cast(sw->sw_tfm), crd->crd_key, + (crd->crd_klen + 7) / 8); + if (error) { + dprintk("cryptosoft: setkey failed %d (crt_flags=0x%x)\n", + error, sw->sw_tfm->crt_flags); + crp->crp_etype = -error; + } + } + + memset(&desc, 0, sizeof(desc)); + desc.tfm = crypto_blkcipher_cast(sw->sw_tfm); + + if (crd->crd_flags & CRD_F_ENCRYPT) { /* encrypt */ + + if (crd->crd_flags & CRD_F_IV_EXPLICIT) { + ivp = crd->crd_iv; + } else { + get_random_bytes(ivp, ivsize); + } + /* + * do we have to copy the IV back to the buffer ? + */ + if ((crd->crd_flags & CRD_F_IV_PRESENT) == 0) { + crypto_copyback(crp->crp_flags, crp->crp_buf, + crd->crd_inject, ivsize, (caddr_t)ivp); + } + desc.info = ivp; + crypto_blkcipher_encrypt_iv(&desc, req->sg, req->sg, sg_len); + + } else { /*decrypt */ + + if (crd->crd_flags & CRD_F_IV_EXPLICIT) { + ivp = crd->crd_iv; + } else { + crypto_copydata(crp->crp_flags, crp->crp_buf, + crd->crd_inject, ivsize, (caddr_t)ivp); + } + desc.info = ivp; + crypto_blkcipher_decrypt_iv(&desc, req->sg, req->sg, sg_len); + } + } break; + + case SW_TYPE_HMAC: + case SW_TYPE_HASH: + { + char result[HASH_MAX_LEN]; + struct hash_desc desc; + + /* check we have room for the result */ + if (crp->crp_ilen - crd->crd_inject < sw->u.hmac.sw_mlen) { + dprintk("cryptosoft: EINVAL crp_ilen=%d, len=%d, inject=%d " + "digestsize=%d\n", crp->crp_ilen, crd->crd_skip + sg_len, + crd->crd_inject, sw->u.hmac.sw_mlen); + crp->crp_etype = EINVAL; + goto done; + } + + memset(&desc, 0, sizeof(desc)); + desc.tfm = crypto_hash_cast(sw->sw_tfm); + + memset(result, 0, sizeof(result)); + + if (sw->sw_type & SW_TYPE_HMAC) { +#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,19) + crypto_hmac(sw->sw_tfm, sw->u.hmac.sw_key, &sw->u.hmac.sw_klen, + req->sg, sg_num, result); +#else + crypto_hash_setkey(desc.tfm, sw->u.hmac.sw_key, + sw->u.hmac.sw_klen); + crypto_hash_digest(&desc, req->sg, sg_len, result); +#endif /* LINUX_VERSION_CODE < KERNEL_VERSION(2,6,19) */ + + } else { /* SW_TYPE_HASH */ + crypto_hash_digest(&desc, req->sg, sg_len, result); + } + + crypto_copyback(crp->crp_flags, crp->crp_buf, + crd->crd_inject, sw->u.hmac.sw_mlen, result); + } + break; + + case SW_TYPE_COMP: { + void *ibuf = NULL; + void *obuf = sw->u.sw_comp_buf; + int ilen = sg_len, olen = CRYPTO_MAX_DATA_LEN; + int ret = 0; + + /* + * we need to use an additional copy if there is more than one + * input chunk since the kernel comp routines do not handle + * SG yet. Otherwise we just use the input buffer as is. + * Rather than allocate another buffer we just split the tmp + * buffer we already have. + * Perhaps we should just use zlib directly ? + */ + if (sg_num > 1) { + int blk; + + ibuf = obuf; + for (blk = 0; blk < sg_num; blk++) { + memcpy(obuf, sg_virt(&req->sg[blk]), + req->sg[blk].length); + obuf += req->sg[blk].length; + } + olen -= sg_len; + } else + ibuf = sg_virt(&req->sg[0]); + + if (crd->crd_flags & CRD_F_ENCRYPT) { /* compress */ + ret = crypto_comp_compress(crypto_comp_cast(sw->sw_tfm), + ibuf, ilen, obuf, &olen); + if (!ret && olen > crd->crd_len) { + dprintk("cryptosoft: ERANGE compress %d into %d\n", + crd->crd_len, olen); + if (swcr_fail_if_compression_grows) + ret = ERANGE; + } + } else { /* decompress */ + ret = crypto_comp_decompress(crypto_comp_cast(sw->sw_tfm), + ibuf, ilen, obuf, &olen); + if (!ret && (olen + crd->crd_inject) > crp->crp_olen) { + dprintk("cryptosoft: ETOOSMALL decompress %d into %d, " + "space for %d,at offset %d\n", + crd->crd_len, olen, crp->crp_olen, crd->crd_inject); + ret = ETOOSMALL; + } + } + if (ret) + dprintk("%s,%d: ret = %d\n", __FILE__, __LINE__, ret); + + /* + * on success copy result back, + * linux crpyto API returns -errno, we need to fix that + */ + crp->crp_etype = ret < 0 ? -ret : ret; + if (ret == 0) { + /* copy back the result and return it's size */ + crypto_copyback(crp->crp_flags, crp->crp_buf, + crd->crd_inject, olen, obuf); + crp->crp_olen = olen; + } + + + } break; + + default: + /* Unknown/unsupported algorithm */ + dprintk("%s,%d: EINVAL\n", __FILE__, __LINE__); + crp->crp_etype = EINVAL; + goto done; + } + +done: + crypto_done(crp); + kmem_cache_free(swcr_req_cache, req); +} + + +/* + * Process a crypto request. + */ +static int +swcr_process(device_t dev, struct cryptop *crp, int hint) +{ + struct swcr_req *req = NULL; + u_int32_t lid; + + dprintk("%s()\n", __FUNCTION__); + /* Sanity check */ + if (crp == NULL) { + dprintk("%s,%d: EINVAL\n", __FILE__, __LINE__); + return EINVAL; + } + + crp->crp_etype = 0; + + if (crp->crp_desc == NULL || crp->crp_buf == NULL) { + dprintk("%s,%d: EINVAL\n", __FILE__, __LINE__); + crp->crp_etype = EINVAL; + goto done; + } + + lid = crp->crp_sid & 0xffffffff; + if (lid >= swcr_sesnum || lid == 0 || swcr_sessions == NULL || + swcr_sessions[lid] == NULL) { + crp->crp_etype = ENOENT; + dprintk("%s,%d: ENOENT\n", __FILE__, __LINE__); + goto done; + } + + /* + * do some error checking outside of the loop for SKB and IOV processing + * this leaves us with valid skb or uiop pointers for later + */ + if (crp->crp_flags & CRYPTO_F_SKBUF) { + struct sk_buff *skb = (struct sk_buff *) crp->crp_buf; + if (skb_shinfo(skb)->nr_frags >= SCATTERLIST_MAX) { + printk("%s,%d: %d nr_frags > SCATTERLIST_MAX", __FILE__, __LINE__, + skb_shinfo(skb)->nr_frags); + goto done; + } + } else if (crp->crp_flags & CRYPTO_F_IOV) { + struct uio *uiop = (struct uio *) crp->crp_buf; + if (uiop->uio_iovcnt > SCATTERLIST_MAX) { + printk("%s,%d: %d uio_iovcnt > SCATTERLIST_MAX", __FILE__, __LINE__, + uiop->uio_iovcnt); + goto done; + } + } + + /* + * setup a new request ready for queuing + */ + req = kmem_cache_alloc(swcr_req_cache, SLAB_ATOMIC); + if (req == NULL) { + dprintk("%s,%d: ENOMEM\n", __FILE__, __LINE__); + crp->crp_etype = ENOMEM; + goto done; + } + memset(req, 0, sizeof(*req)); + + req->sw_head = swcr_sessions[lid]; + req->crp = crp; + req->crd = crp->crp_desc; + + swcr_process_req(req); + return 0; + +done: + crypto_done(crp); + if (req) + kmem_cache_free(swcr_req_cache, req); + return 0; +} + + +static int +cryptosoft_init(void) +{ + int i, sw_type, mode; + char *algo; + + dprintk("%s(%p)\n", __FUNCTION__, cryptosoft_init); + + swcr_req_cache = kmem_cache_create("cryptosoft_req", + sizeof(struct swcr_req), 0, SLAB_HWCACHE_ALIGN, NULL +#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,23) + , NULL +#endif + ); + if (!swcr_req_cache) { + printk("cryptosoft: failed to create request cache\n"); + return -ENOENT; + } + + softc_device_init(&swcr_softc, "cryptosoft", 0, swcr_methods); + + swcr_id = crypto_get_driverid(softc_get_device(&swcr_softc), + CRYPTOCAP_F_SOFTWARE | CRYPTOCAP_F_SYNC); + if (swcr_id < 0) { + printk("cryptosoft: Software crypto device cannot initialize!"); + return -ENODEV; + } + +#define REGISTER(alg) \ + crypto_register(swcr_id, alg, 0,0) + + for (i = 0; i < sizeof(crypto_details)/sizeof(crypto_details[0]); i++) { + int found; + + algo = crypto_details[i].alg_name; + if (!algo || !*algo) { + dprintk("%s:Algorithm %d not supported\n", __FUNCTION__, i); + continue; + } + + mode = crypto_details[i].mode; + sw_type = crypto_details[i].sw_type; + + found = 0; + switch (sw_type & SW_TYPE_ALG_MASK) { + case SW_TYPE_CIPHER: + found = crypto_has_cipher(algo, 0, CRYPTO_ALG_ASYNC); + break; + case SW_TYPE_HMAC: + found = crypto_has_hash(algo, 0, swcr_no_ahash?CRYPTO_ALG_ASYNC:0); + break; + case SW_TYPE_HASH: + found = crypto_has_hash(algo, 0, swcr_no_ahash?CRYPTO_ALG_ASYNC:0); + break; + case SW_TYPE_COMP: + found = crypto_has_comp(algo, 0, CRYPTO_ALG_ASYNC); + break; + case SW_TYPE_BLKCIPHER: + found = crypto_has_blkcipher(algo, 0, CRYPTO_ALG_ASYNC); + if (!found && !swcr_no_ablk) + found = crypto_has_ablkcipher(algo, 0, 0); + break; + } + if (found) { + REGISTER(i); + } else { + dprintk("%s:Algorithm Type %d not supported (algorithm %d:'%s')\n", + __FUNCTION__, sw_type, i, algo); + } + } + return 0; +} + +static void +cryptosoft_exit(void) +{ + dprintk("%s()\n", __FUNCTION__); + crypto_unregister_all(swcr_id); + swcr_id = -1; + kmem_cache_destroy(swcr_req_cache); +} + +late_initcall(cryptosoft_init); +module_exit(cryptosoft_exit); + +MODULE_LICENSE("Dual BSD/GPL"); +MODULE_AUTHOR("David McCullough "); +MODULE_DESCRIPTION("Cryptosoft (OCF module for kernel crypto)"); diff --git a/target/linux/generic-2.4/files/crypto/ocf/ep80579/Makefile b/target/linux/generic-2.4/files/crypto/ocf/ep80579/Makefile new file mode 100644 index 0000000000..9aab295731 --- /dev/null +++ b/target/linux/generic-2.4/files/crypto/ocf/ep80579/Makefile @@ -0,0 +1,119 @@ +######################################################################### +# +# Targets supported +# all - builds everything and installs +# install - identical to all +# depend - build dependencies +# clean - clears derived objects except the .depend files +# distclean- clears all derived objects and the .depend file +# +# @par +# This file is provided under a dual BSD/GPLv2 license. When using or +# redistributing this file, you may do so under either license. +# +# GPL LICENSE SUMMARY +# +# Copyright(c) 2007,2008,2009 Intel Corporation. All rights reserved. +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of version 2 of the GNU General Public License as +# published by the Free Software Foundation. +# +# This program is distributed in the hope that it will be useful, but +# WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +# General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. +# The full GNU General Public License is included in this distribution +# in the file called LICENSE.GPL. +# +# Contact Information: +# Intel Corporation +# +# BSD LICENSE +# +# Copyright(c) 2007,2008,2009 Intel Corporation. All rights reserved. +# All rights reserved. +# +# Redistribution and use in source and binary forms, with or without +# modification, are permitted provided that the following conditions +# are met: +# +# * Redistributions of source code must retain the above copyright +# notice, this list of conditions and the following disclaimer. +# * Redistributions in binary form must reproduce the above copyright +# notice, this list of conditions and the following disclaimer in +# the documentation and/or other materials provided with the +# distribution. +# * Neither the name of Intel Corporation nor the names of its +# contributors may be used to endorse or promote products derived +# from this software without specific prior written permission. +# +# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS +# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT +# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR +# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT +# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, +# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT +# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, +# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY +# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE +# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +# +# +# version: Security.L.1.0.2-229 +############################################################################ + + +####################Common variables and definitions######################## + +ifndef ICP_ROOT +$(warning ICP_ROOT is undefined. Please set the path to EP80579 release package directory \ + "-> setenv ICP_ROOT ") +all fastdep: + : +else + +ifndef KERNEL_SOURCE_ROOT +$(error KERNEL_SOURCE_ROOT is undefined. Please set the path to the kernel source directory \ + "-> setenv KERNEL_SOURCE_ROOT ") +endif + +# Ensure The ENV_DIR environmental var is defined. +ifndef ICP_ENV_DIR +$(error ICP_ENV_DIR is undefined. Please set the path to EP80579 driver environment.mk file \ + "-> setenv ICP_ENV_DIR ") +endif + +#Add your project environment Makefile +include ${ICP_ENV_DIR}/environment.mk + +#include the makefile with all the default and common Make variable definitions +include ${ICP_BUILDSYSTEM_PATH}/build_files/common.mk + +#Add the name for the executable, Library or Module output definitions +OUTPUT_NAME= icp_ocf + +# List of Source Files to be compiled +SOURCES= icp_common.c icp_sym.c icp_asym.c icp_ocf_linux.c + +#common includes between all supported OSes +INCLUDES= -I ${ICP_API_DIR} -I${ICP_LAC_API} \ +-I${ICP_OCF_SRC_DIR} + +# The location of the os level makefile needs to be changed. +include ${ICP_ENV_DIR}/${ICP_OS}_${ICP_OS_LEVEL}.mk + +# On the line directly below list the outputs you wish to build for, +# e.g "lib_static lib_shared exe module" as shown below +install: module + +###################Include rules makefiles######################## +include ${ICP_BUILDSYSTEM_PATH}/build_files/rules.mk +###################End of Rules inclusion######################### + +endif diff --git a/target/linux/generic-2.4/files/crypto/ocf/ep80579/icp_asym.c b/target/linux/generic-2.4/files/crypto/ocf/ep80579/icp_asym.c new file mode 100644 index 0000000000..d2641c5455 --- /dev/null +++ b/target/linux/generic-2.4/files/crypto/ocf/ep80579/icp_asym.c @@ -0,0 +1,1334 @@ +/*************************************************************************** + * + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2007,2008,2009 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + * The full GNU General Public License is included in this distribution + * in the file called LICENSE.GPL. + * + * Contact Information: + * Intel Corporation + * + * BSD LICENSE + * + * Copyright(c) 2007,2008,2009 Intel Corporation. All rights reserved. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * + * version: Security.L.1.0.2-229 + * + ***************************************************************************/ + +#include "icp_ocf.h" + +/*The following define values (containing the word 'INDEX') are used to find +the index of each input buffer of the crypto_kop struct (see OCF cryptodev.h). +These values were found through analysis of the OCF OpenSSL patch. If the +calling program uses different input buffer positions, these defines will have +to be changed.*/ + +/*DIFFIE HELLMAN buffer index values*/ +#define ICP_DH_KRP_PARAM_PRIME_INDEX (0) +#define ICP_DH_KRP_PARAM_BASE_INDEX (1) +#define ICP_DH_KRP_PARAM_PRIVATE_VALUE_INDEX (2) +#define ICP_DH_KRP_PARAM_RESULT_INDEX (3) + +/*MOD EXP buffer index values*/ +#define ICP_MOD_EXP_KRP_PARAM_BASE_INDEX (0) +#define ICP_MOD_EXP_KRP_PARAM_EXPONENT_INDEX (1) +#define ICP_MOD_EXP_KRP_PARAM_MODULUS_INDEX (2) +#define ICP_MOD_EXP_KRP_PARAM_RESULT_INDEX (3) + +/*MOD EXP CRT buffer index values*/ +#define ICP_MOD_EXP_CRT_KRP_PARAM_PRIME_P_INDEX (0) +#define ICP_MOD_EXP_CRT_KRP_PARAM_PRIME_Q_INDEX (1) +#define ICP_MOD_EXP_CRT_KRP_PARAM_I_INDEX (2) +#define ICP_MOD_EXP_CRT_KRP_PARAM_EXPONENT_DP_INDEX (3) +#define ICP_MOD_EXP_CRT_KRP_PARAM_EXPONENT_DQ_INDEX (4) +#define ICP_MOD_EXP_CRT_KRP_PARAM_COEFF_QINV_INDEX (5) +#define ICP_MOD_EXP_CRT_KRP_PARAM_RESULT_INDEX (6) + +/*DSA sign buffer index values*/ +#define ICP_DSA_SIGN_KRP_PARAM_DGST_INDEX (0) +#define ICP_DSA_SIGN_KRP_PARAM_PRIME_P_INDEX (1) +#define ICP_DSA_SIGN_KRP_PARAM_PRIME_Q_INDEX (2) +#define ICP_DSA_SIGN_KRP_PARAM_G_INDEX (3) +#define ICP_DSA_SIGN_KRP_PARAM_X_INDEX (4) +#define ICP_DSA_SIGN_KRP_PARAM_R_RESULT_INDEX (5) +#define ICP_DSA_SIGN_KRP_PARAM_S_RESULT_INDEX (6) + +/*DSA verify buffer index values*/ +#define ICP_DSA_VERIFY_KRP_PARAM_DGST_INDEX (0) +#define ICP_DSA_VERIFY_KRP_PARAM_PRIME_P_INDEX (1) +#define ICP_DSA_VERIFY_KRP_PARAM_PRIME_Q_INDEX (2) +#define ICP_DSA_VERIFY_KRP_PARAM_G_INDEX (3) +#define ICP_DSA_VERIFY_KRP_PARAM_PUBKEY_INDEX (4) +#define ICP_DSA_VERIFY_KRP_PARAM_SIG_R_INDEX (5) +#define ICP_DSA_VERIFY_KRP_PARAM_SIG_S_INDEX (6) + +/*DSA sign prime Q vs random number K size check values*/ +#define DONT_RUN_LESS_THAN_CHECK (0) +#define FAIL_A_IS_GREATER_THAN_B (1) +#define FAIL_A_IS_EQUAL_TO_B (1) +#define SUCCESS_A_IS_LESS_THAN_B (0) +#define DSA_SIGN_RAND_GEN_VAL_CHECK_MAX_ITERATIONS (500) + +/* We need to set a cryptokp success value just in case it is set or allocated + and not set to zero outside of this module */ +#define CRYPTO_OP_SUCCESS (0) + +/*Function to compute Diffie Hellman (DH) phase 1 or phase 2 key values*/ +static int icp_ocfDrvDHComputeKey(struct cryptkop *krp); + +/*Function to compute a Modular Exponentiation (Mod Exp)*/ +static int icp_ocfDrvModExp(struct cryptkop *krp); + +/*Function to compute a Mod Exp using the Chinease Remainder Theorem*/ +static int icp_ocfDrvModExpCRT(struct cryptkop *krp); + +/*Helper function to compute whether the first big number argument is less than + the second big number argument */ +static int +icp_ocfDrvCheckALessThanB(CpaFlatBuffer * pK, CpaFlatBuffer * pQ, int *doCheck); + +/*Function to sign an input with DSA R and S keys*/ +static int icp_ocfDrvDsaSign(struct cryptkop *krp); + +/*Function to Verify a DSA buffer signature*/ +static int icp_ocfDrvDsaVerify(struct cryptkop *krp); + +/*Callback function for DH operation*/ +static void +icp_ocfDrvDhP1CallBack(void *callbackTag, + CpaStatus status, + void *pOpData, CpaFlatBuffer * pLocalOctetStringPV); + +/*Callback function for ME operation*/ +static void +icp_ocfDrvModExpCallBack(void *callbackTag, + CpaStatus status, + void *pOpData, CpaFlatBuffer * pResult); + +/*Callback function for ME CRT operation*/ +static void +icp_ocfDrvModExpCRTCallBack(void *callbackTag, + CpaStatus status, + void *pOpData, CpaFlatBuffer * pOutputData); + +/*Callback function for DSA sign operation*/ +static void +icp_ocfDrvDsaRSSignCallBack(void *callbackTag, + CpaStatus status, + void *pOpData, + CpaBoolean protocolStatus, + CpaFlatBuffer * pR, CpaFlatBuffer * pS); + +/*Callback function for DSA Verify operation*/ +static void +icp_ocfDrvDsaVerifyCallBack(void *callbackTag, + CpaStatus status, + void *pOpData, CpaBoolean verifyStatus); + +/* Name : icp_ocfDrvPkeProcess + * + * Description : This function will choose which PKE process to follow + * based on the input arguments + */ +int icp_ocfDrvPkeProcess(icp_device_t dev, struct cryptkop *krp, int hint) +{ + CpaStatus lacStatus = CPA_STATUS_SUCCESS; + + if (NULL == krp) { + DPRINTK("%s(): Invalid input parameters, cryptkop = %p\n", + __FUNCTION__, krp); + return EINVAL; + } + + if (CPA_TRUE == icp_atomic_read(&icp_ocfDrvIsExiting)) { + krp->krp_status = ECANCELED; + return ECANCELED; + } + + switch (krp->krp_op) { + case CRK_DH_COMPUTE_KEY: + DPRINTK("%s() doing DH_COMPUTE_KEY\n", __FUNCTION__); + lacStatus = icp_ocfDrvDHComputeKey(krp); + if (CPA_STATUS_SUCCESS != lacStatus) { + EPRINTK("%s(): icp_ocfDrvDHComputeKey failed " + "(%d).\n", __FUNCTION__, lacStatus); + krp->krp_status = ECANCELED; + return ECANCELED; + } + + break; + + case CRK_MOD_EXP: + DPRINTK("%s() doing MOD_EXP \n", __FUNCTION__); + lacStatus = icp_ocfDrvModExp(krp); + if (CPA_STATUS_SUCCESS != lacStatus) { + EPRINTK("%s(): icp_ocfDrvModExp failed (%d).\n", + __FUNCTION__, lacStatus); + krp->krp_status = ECANCELED; + return ECANCELED; + } + + break; + + case CRK_MOD_EXP_CRT: + DPRINTK("%s() doing MOD_EXP_CRT \n", __FUNCTION__); + lacStatus = icp_ocfDrvModExpCRT(krp); + if (CPA_STATUS_SUCCESS != lacStatus) { + EPRINTK("%s(): icp_ocfDrvModExpCRT " + "failed (%d).\n", __FUNCTION__, lacStatus); + krp->krp_status = ECANCELED; + return ECANCELED; + } + + break; + + case CRK_DSA_SIGN: + DPRINTK("%s() doing DSA_SIGN \n", __FUNCTION__); + lacStatus = icp_ocfDrvDsaSign(krp); + if (CPA_STATUS_SUCCESS != lacStatus) { + EPRINTK("%s(): icp_ocfDrvDsaSign " + "failed (%d).\n", __FUNCTION__, lacStatus); + krp->krp_status = ECANCELED; + return ECANCELED; + } + + break; + + case CRK_DSA_VERIFY: + DPRINTK("%s() doing DSA_VERIFY \n", __FUNCTION__); + lacStatus = icp_ocfDrvDsaVerify(krp); + if (CPA_STATUS_SUCCESS != lacStatus) { + EPRINTK("%s(): icp_ocfDrvDsaVerify " + "failed (%d).\n", __FUNCTION__, lacStatus); + krp->krp_status = ECANCELED; + return ECANCELED; + } + + break; + + default: + EPRINTK("%s(): Asymettric function not " + "supported (%d).\n", __FUNCTION__, krp->krp_op); + krp->krp_status = EOPNOTSUPP; + return EOPNOTSUPP; + } + + return ICP_OCF_DRV_STATUS_SUCCESS; +} + +/* Name : icp_ocfDrvSwapBytes + * + * Description : This function is used to swap the byte order of a buffer. + * It has been seen that in general we are passed little endian byte order + * buffers, but LAC only accepts big endian byte order buffers. + */ +static void inline icp_ocfDrvSwapBytes(u_int8_t * num, u_int32_t buff_len_bytes) +{ + + int i; + u_int8_t *end_ptr; + u_int8_t hold_val; + + end_ptr = num + (buff_len_bytes - 1); + buff_len_bytes = buff_len_bytes >> 1; + for (i = 0; i < buff_len_bytes; i++) { + hold_val = *num; + *num = *end_ptr; + num++; + *end_ptr = hold_val; + end_ptr--; + } +} + +/* Name : icp_ocfDrvDHComputeKey + * + * Description : This function will map Diffie Hellman calls from OCF + * to the LAC API. OCF uses this function for Diffie Hellman Phase1 and + * Phase2. LAC has a separate Diffie Hellman Phase2 call, however both phases + * break down to a modular exponentiation. + */ +static int icp_ocfDrvDHComputeKey(struct cryptkop *krp) +{ + CpaStatus lacStatus = CPA_STATUS_SUCCESS; + void *callbackTag = NULL; + CpaCyDhPhase1KeyGenOpData *pPhase1OpData = NULL; + CpaFlatBuffer *pLocalOctetStringPV = NULL; + uint32_t dh_prime_len_bytes = 0, dh_prime_len_bits = 0; + + /* Input checks - check prime is a multiple of 8 bits to allow for + allocation later */ + dh_prime_len_bits = + (krp->krp_param[ICP_DH_KRP_PARAM_PRIME_INDEX].crp_nbits); + + /* LAC can reject prime lengths based on prime key sizes, we just + need to make sure we can allocate space for the base and + exponent buffers correctly */ + if ((dh_prime_len_bits % NUM_BITS_IN_BYTE) != 0) { + APRINTK("%s(): Warning Prime number buffer size is not a " + "multiple of 8 bits\n", __FUNCTION__); + } + + /* Result storage space should be the same size as the prime as this + value can take up the same amount of storage space */ + if (dh_prime_len_bits != + krp->krp_param[ICP_DH_KRP_PARAM_RESULT_INDEX].crp_nbits) { + DPRINTK("%s(): Return Buffer must be the same size " + "as the Prime buffer\n", __FUNCTION__); + krp->krp_status = EINVAL; + return EINVAL; + } + /* Switch to size in bytes */ + BITS_TO_BYTES(dh_prime_len_bytes, dh_prime_len_bits); + + callbackTag = krp; + +/*All allocations are set to ICP_M_NOWAIT due to the possibility of getting +called in interrupt context*/ + pPhase1OpData = icp_kmem_cache_zalloc(drvDH_zone, ICP_M_NOWAIT); + if (NULL == pPhase1OpData) { + APRINTK("%s():Failed to get memory for key gen data\n", + __FUNCTION__); + krp->krp_status = ENOMEM; + return ENOMEM; + } + + pLocalOctetStringPV = + icp_kmem_cache_zalloc(drvFlatBuffer_zone, ICP_M_NOWAIT); + if (NULL == pLocalOctetStringPV) { + APRINTK("%s():Failed to get memory for pLocalOctetStringPV\n", + __FUNCTION__); + ICP_CACHE_FREE(drvDH_zone, pPhase1OpData); + krp->krp_status = ENOMEM; + return ENOMEM; + } + + /* Link parameters */ + pPhase1OpData->primeP.pData = + krp->krp_param[ICP_DH_KRP_PARAM_PRIME_INDEX].crp_p; + + pPhase1OpData->primeP.dataLenInBytes = dh_prime_len_bytes; + + icp_ocfDrvSwapBytes(pPhase1OpData->primeP.pData, dh_prime_len_bytes); + + pPhase1OpData->baseG.pData = + krp->krp_param[ICP_DH_KRP_PARAM_BASE_INDEX].crp_p; + + BITS_TO_BYTES(pPhase1OpData->baseG.dataLenInBytes, + krp->krp_param[ICP_DH_KRP_PARAM_BASE_INDEX].crp_nbits); + + icp_ocfDrvSwapBytes(pPhase1OpData->baseG.pData, + pPhase1OpData->baseG.dataLenInBytes); + + pPhase1OpData->privateValueX.pData = + krp->krp_param[ICP_DH_KRP_PARAM_PRIVATE_VALUE_INDEX].crp_p; + + BITS_TO_BYTES(pPhase1OpData->privateValueX.dataLenInBytes, + krp->krp_param[ICP_DH_KRP_PARAM_PRIVATE_VALUE_INDEX]. + crp_nbits); + + icp_ocfDrvSwapBytes(pPhase1OpData->privateValueX.pData, + pPhase1OpData->privateValueX.dataLenInBytes); + + /* Output parameters */ + pLocalOctetStringPV->pData = + krp->krp_param[ICP_DH_KRP_PARAM_RESULT_INDEX].crp_p; + + BITS_TO_BYTES(pLocalOctetStringPV->dataLenInBytes, + krp->krp_param[ICP_DH_KRP_PARAM_RESULT_INDEX].crp_nbits); + + lacStatus = cpaCyDhKeyGenPhase1(CPA_INSTANCE_HANDLE_SINGLE, + icp_ocfDrvDhP1CallBack, + callbackTag, pPhase1OpData, + pLocalOctetStringPV); + + if (CPA_STATUS_SUCCESS != lacStatus) { + EPRINTK("%s(): DH Phase 1 Key Gen failed (%d).\n", + __FUNCTION__, lacStatus); + icp_ocfDrvFreeFlatBuffer(pLocalOctetStringPV); + ICP_CACHE_FREE(drvDH_zone, pPhase1OpData); + } + + return lacStatus; +} + +/* Name : icp_ocfDrvModExp + * + * Description : This function will map ordinary Modular Exponentiation calls + * from OCF to the LAC API. + * + */ +static int icp_ocfDrvModExp(struct cryptkop *krp) +{ + CpaStatus lacStatus = CPA_STATUS_SUCCESS; + void *callbackTag = NULL; + CpaCyLnModExpOpData *pModExpOpData = NULL; + CpaFlatBuffer *pResult = NULL; + + if ((krp->krp_param[ICP_MOD_EXP_KRP_PARAM_MODULUS_INDEX].crp_nbits % + NUM_BITS_IN_BYTE) != 0) { + DPRINTK("%s(): Warning - modulus buffer size (%d) is not a " + "multiple of 8 bits\n", __FUNCTION__, + krp->krp_param[ICP_MOD_EXP_KRP_PARAM_MODULUS_INDEX]. + crp_nbits); + } + + /* Result storage space should be the same size as the prime as this + value can take up the same amount of storage space */ + if (krp->krp_param[ICP_MOD_EXP_KRP_PARAM_MODULUS_INDEX].crp_nbits > + krp->krp_param[ICP_MOD_EXP_KRP_PARAM_RESULT_INDEX].crp_nbits) { + APRINTK("%s(): Return Buffer size must be the same or" + " greater than the Modulus buffer\n", __FUNCTION__); + krp->krp_status = EINVAL; + return EINVAL; + } + + callbackTag = krp; + + pModExpOpData = icp_kmem_cache_zalloc(drvLnModExp_zone, ICP_M_NOWAIT); + if (NULL == pModExpOpData) { + APRINTK("%s():Failed to get memory for key gen data\n", + __FUNCTION__); + krp->krp_status = ENOMEM; + return ENOMEM; + } + + pResult = icp_kmem_cache_zalloc(drvFlatBuffer_zone, ICP_M_NOWAIT); + if (NULL == pResult) { + APRINTK("%s():Failed to get memory for ModExp result\n", + __FUNCTION__); + ICP_CACHE_FREE(drvLnModExp_zone, pModExpOpData); + krp->krp_status = ENOMEM; + return ENOMEM; + } + + /* Link parameters */ + pModExpOpData->modulus.pData = + krp->krp_param[ICP_MOD_EXP_KRP_PARAM_MODULUS_INDEX].crp_p; + BITS_TO_BYTES(pModExpOpData->modulus.dataLenInBytes, + krp->krp_param[ICP_MOD_EXP_KRP_PARAM_MODULUS_INDEX]. + crp_nbits); + + icp_ocfDrvSwapBytes(pModExpOpData->modulus.pData, + pModExpOpData->modulus.dataLenInBytes); + + DPRINTK("%s : base (%d)\n", __FUNCTION__, krp-> + krp_param[ICP_MOD_EXP_KRP_PARAM_BASE_INDEX].crp_nbits); + pModExpOpData->base.pData = + krp->krp_param[ICP_MOD_EXP_KRP_PARAM_BASE_INDEX].crp_p; + BITS_TO_BYTES(pModExpOpData->base.dataLenInBytes, + krp->krp_param[ICP_MOD_EXP_KRP_PARAM_BASE_INDEX]. + crp_nbits); + icp_ocfDrvSwapBytes(pModExpOpData->base.pData, + pModExpOpData->base.dataLenInBytes); + + pModExpOpData->exponent.pData = + krp->krp_param[ICP_MOD_EXP_KRP_PARAM_EXPONENT_INDEX].crp_p; + BITS_TO_BYTES(pModExpOpData->exponent.dataLenInBytes, + krp->krp_param[ICP_MOD_EXP_KRP_PARAM_EXPONENT_INDEX]. + crp_nbits); + + icp_ocfDrvSwapBytes(pModExpOpData->exponent.pData, + pModExpOpData->exponent.dataLenInBytes); + /* Output parameters */ + pResult->pData = + krp->krp_param[ICP_MOD_EXP_KRP_PARAM_RESULT_INDEX].crp_p, + BITS_TO_BYTES(pResult->dataLenInBytes, + krp->krp_param[ICP_MOD_EXP_KRP_PARAM_RESULT_INDEX]. + crp_nbits); + + lacStatus = cpaCyLnModExp(CPA_INSTANCE_HANDLE_SINGLE, + icp_ocfDrvModExpCallBack, + callbackTag, pModExpOpData, pResult); + + if (CPA_STATUS_SUCCESS != lacStatus) { + EPRINTK("%s(): Mod Exp Operation failed (%d).\n", + __FUNCTION__, lacStatus); + krp->krp_status = ECANCELED; + icp_ocfDrvFreeFlatBuffer(pResult); + ICP_CACHE_FREE(drvLnModExp_zone, pModExpOpData); + } + + return lacStatus; +} + +/* Name : icp_ocfDrvModExpCRT + * + * Description : This function will map ordinary Modular Exponentiation Chinese + * Remainder Theorem implementaion calls from OCF to the LAC API. + * + * Note : Mod Exp CRT for this driver is accelerated through LAC RSA type 2 + * decrypt operation. Therefore P and Q input values must always be prime + * numbers. Although basic primality checks are done in LAC, it is up to the + * user to do any correct prime number checking before passing the inputs. + */ +static int icp_ocfDrvModExpCRT(struct cryptkop *krp) +{ + CpaStatus lacStatus = CPA_STATUS_SUCCESS; + CpaCyRsaDecryptOpData *rsaDecryptOpData = NULL; + void *callbackTag = NULL; + CpaFlatBuffer *pOutputData = NULL; + + /*Parameter input checks are all done by LAC, no need to repeat + them here. */ + callbackTag = krp; + + rsaDecryptOpData = + icp_kmem_cache_zalloc(drvRSADecrypt_zone, ICP_M_NOWAIT); + if (NULL == rsaDecryptOpData) { + APRINTK("%s():Failed to get memory" + " for MOD EXP CRT Op data struct\n", __FUNCTION__); + krp->krp_status = ENOMEM; + return ENOMEM; + } + + rsaDecryptOpData->pRecipientPrivateKey + = icp_kmem_cache_zalloc(drvRSAPrivateKey_zone, ICP_M_NOWAIT); + if (NULL == rsaDecryptOpData->pRecipientPrivateKey) { + APRINTK("%s():Failed to get memory for MOD EXP CRT" + " private key values struct\n", __FUNCTION__); + ICP_CACHE_FREE(drvRSADecrypt_zone, rsaDecryptOpData); + krp->krp_status = ENOMEM; + return ENOMEM; + } + + rsaDecryptOpData->pRecipientPrivateKey-> + version = CPA_CY_RSA_VERSION_TWO_PRIME; + rsaDecryptOpData->pRecipientPrivateKey-> + privateKeyRepType = CPA_CY_RSA_PRIVATE_KEY_REP_TYPE_2; + + pOutputData = icp_kmem_cache_zalloc(drvFlatBuffer_zone, ICP_M_NOWAIT); + if (NULL == pOutputData) { + APRINTK("%s():Failed to get memory" + " for MOD EXP CRT output data\n", __FUNCTION__); + ICP_CACHE_FREE(drvRSAPrivateKey_zone, + rsaDecryptOpData->pRecipientPrivateKey); + ICP_CACHE_FREE(drvRSADecrypt_zone, rsaDecryptOpData); + krp->krp_status = ENOMEM; + return ENOMEM; + } + + rsaDecryptOpData->pRecipientPrivateKey-> + version = CPA_CY_RSA_VERSION_TWO_PRIME; + rsaDecryptOpData->pRecipientPrivateKey-> + privateKeyRepType = CPA_CY_RSA_PRIVATE_KEY_REP_TYPE_2; + + /* Link parameters */ + rsaDecryptOpData->inputData.pData = + krp->krp_param[ICP_MOD_EXP_CRT_KRP_PARAM_I_INDEX].crp_p; + BITS_TO_BYTES(rsaDecryptOpData->inputData.dataLenInBytes, + krp->krp_param[ICP_MOD_EXP_CRT_KRP_PARAM_I_INDEX]. + crp_nbits); + + icp_ocfDrvSwapBytes(rsaDecryptOpData->inputData.pData, + rsaDecryptOpData->inputData.dataLenInBytes); + + rsaDecryptOpData->pRecipientPrivateKey->privateKeyRep2.prime1P.pData = + krp->krp_param[ICP_MOD_EXP_CRT_KRP_PARAM_PRIME_P_INDEX].crp_p; + BITS_TO_BYTES(rsaDecryptOpData->pRecipientPrivateKey->privateKeyRep2. + prime1P.dataLenInBytes, + krp->krp_param[ICP_MOD_EXP_CRT_KRP_PARAM_PRIME_P_INDEX]. + crp_nbits); + + icp_ocfDrvSwapBytes(rsaDecryptOpData->pRecipientPrivateKey-> + privateKeyRep2.prime1P.pData, + rsaDecryptOpData->pRecipientPrivateKey-> + privateKeyRep2.prime1P.dataLenInBytes); + + rsaDecryptOpData->pRecipientPrivateKey->privateKeyRep2.prime2Q.pData = + krp->krp_param[ICP_MOD_EXP_CRT_KRP_PARAM_PRIME_Q_INDEX].crp_p; + BITS_TO_BYTES(rsaDecryptOpData->pRecipientPrivateKey->privateKeyRep2. + prime2Q.dataLenInBytes, + krp->krp_param[ICP_MOD_EXP_CRT_KRP_PARAM_PRIME_Q_INDEX]. + crp_nbits); + + icp_ocfDrvSwapBytes(rsaDecryptOpData->pRecipientPrivateKey-> + privateKeyRep2.prime2Q.pData, + rsaDecryptOpData->pRecipientPrivateKey-> + privateKeyRep2.prime2Q.dataLenInBytes); + + rsaDecryptOpData->pRecipientPrivateKey-> + privateKeyRep2.exponent1Dp.pData = + krp->krp_param[ICP_MOD_EXP_CRT_KRP_PARAM_EXPONENT_DP_INDEX].crp_p; + BITS_TO_BYTES(rsaDecryptOpData->pRecipientPrivateKey->privateKeyRep2. + exponent1Dp.dataLenInBytes, + krp-> + krp_param[ICP_MOD_EXP_CRT_KRP_PARAM_EXPONENT_DP_INDEX]. + crp_nbits); + + icp_ocfDrvSwapBytes(rsaDecryptOpData->pRecipientPrivateKey-> + privateKeyRep2.exponent1Dp.pData, + rsaDecryptOpData->pRecipientPrivateKey-> + privateKeyRep2.exponent1Dp.dataLenInBytes); + + rsaDecryptOpData->pRecipientPrivateKey-> + privateKeyRep2.exponent2Dq.pData = + krp->krp_param[ICP_MOD_EXP_CRT_KRP_PARAM_EXPONENT_DQ_INDEX].crp_p; + BITS_TO_BYTES(rsaDecryptOpData->pRecipientPrivateKey-> + privateKeyRep2.exponent2Dq.dataLenInBytes, + krp-> + krp_param[ICP_MOD_EXP_CRT_KRP_PARAM_EXPONENT_DQ_INDEX]. + crp_nbits); + + icp_ocfDrvSwapBytes(rsaDecryptOpData->pRecipientPrivateKey-> + privateKeyRep2.exponent2Dq.pData, + rsaDecryptOpData->pRecipientPrivateKey-> + privateKeyRep2.exponent2Dq.dataLenInBytes); + + rsaDecryptOpData->pRecipientPrivateKey-> + privateKeyRep2.coefficientQInv.pData = + krp->krp_param[ICP_MOD_EXP_CRT_KRP_PARAM_COEFF_QINV_INDEX].crp_p; + BITS_TO_BYTES(rsaDecryptOpData->pRecipientPrivateKey-> + privateKeyRep2.coefficientQInv.dataLenInBytes, + krp-> + krp_param[ICP_MOD_EXP_CRT_KRP_PARAM_COEFF_QINV_INDEX]. + crp_nbits); + + icp_ocfDrvSwapBytes(rsaDecryptOpData->pRecipientPrivateKey-> + privateKeyRep2.coefficientQInv.pData, + rsaDecryptOpData->pRecipientPrivateKey-> + privateKeyRep2.coefficientQInv.dataLenInBytes); + + /* Output Parameter */ + pOutputData->pData = + krp->krp_param[ICP_MOD_EXP_CRT_KRP_PARAM_RESULT_INDEX].crp_p; + BITS_TO_BYTES(pOutputData->dataLenInBytes, + krp->krp_param[ICP_MOD_EXP_CRT_KRP_PARAM_RESULT_INDEX]. + crp_nbits); + + lacStatus = cpaCyRsaDecrypt(CPA_INSTANCE_HANDLE_SINGLE, + icp_ocfDrvModExpCRTCallBack, + callbackTag, rsaDecryptOpData, pOutputData); + + if (CPA_STATUS_SUCCESS != lacStatus) { + EPRINTK("%s(): Mod Exp CRT Operation failed (%d).\n", + __FUNCTION__, lacStatus); + krp->krp_status = ECANCELED; + icp_ocfDrvFreeFlatBuffer(pOutputData); + ICP_CACHE_FREE(drvRSAPrivateKey_zone, + rsaDecryptOpData->pRecipientPrivateKey); + ICP_CACHE_FREE(drvRSADecrypt_zone, rsaDecryptOpData); + } + + return lacStatus; +} + +/* Name : icp_ocfDrvCheckALessThanB + * + * Description : This function will check whether the first argument is less + * than the second. It is used to check whether the DSA RS sign Random K + * value is less than the Prime Q value (as defined in the specification) + * + */ +static int +icp_ocfDrvCheckALessThanB(CpaFlatBuffer * pK, CpaFlatBuffer * pQ, int *doCheck) +{ + + uint8_t *MSB_K = pK->pData; + uint8_t *MSB_Q = pQ->pData; + uint32_t buffer_lengths_in_bytes = pQ->dataLenInBytes; + + if (DONT_RUN_LESS_THAN_CHECK == *doCheck) { + return FAIL_A_IS_GREATER_THAN_B; + } + +/*Check MSBs +if A == B, check next MSB +if A > B, return A_IS_GREATER_THAN_B +if A < B, return A_IS_LESS_THAN_B (success) +*/ + while (*MSB_K == *MSB_Q) { + MSB_K++; + MSB_Q++; + + buffer_lengths_in_bytes--; + if (0 == buffer_lengths_in_bytes) { + DPRINTK("%s() Buffers have equal value!!\n", + __FUNCTION__); + return FAIL_A_IS_EQUAL_TO_B; + } + + } + + if (*MSB_K < *MSB_Q) { + return SUCCESS_A_IS_LESS_THAN_B; + } else { + return FAIL_A_IS_GREATER_THAN_B; + } + +} + +/* Name : icp_ocfDrvDsaSign + * + * Description : This function will map DSA RS Sign from OCF to the LAC API. + * + * NOTE: From looking at OCF patch to OpenSSL and even the number of input + * parameters, OCF expects us to generate the random seed value. This value + * is generated and passed to LAC, however the number is discared in the + * callback and not returned to the user. + */ +static int icp_ocfDrvDsaSign(struct cryptkop *krp) +{ + CpaStatus lacStatus = CPA_STATUS_SUCCESS; + CpaCyDsaRSSignOpData *dsaRsSignOpData = NULL; + void *callbackTag = NULL; + CpaCyRandGenOpData randGenOpData; + int primeQSizeInBytes = 0; + int doCheck = 0; + CpaFlatBuffer randData; + CpaBoolean protocolStatus = CPA_FALSE; + CpaFlatBuffer *pR = NULL; + CpaFlatBuffer *pS = NULL; + + callbackTag = krp; + + BITS_TO_BYTES(primeQSizeInBytes, + krp->krp_param[ICP_DSA_SIGN_KRP_PARAM_PRIME_Q_INDEX]. + crp_nbits); + + if (DSA_RS_SIGN_PRIMEQ_SIZE_IN_BYTES != primeQSizeInBytes) { + APRINTK("%s(): DSA PRIME Q size not equal to the " + "FIPS defined 20bytes, = %d\n", + __FUNCTION__, primeQSizeInBytes); + krp->krp_status = EDOM; + return EDOM; + } + + dsaRsSignOpData = + icp_kmem_cache_zalloc(drvDSARSSign_zone, ICP_M_NOWAIT); + if (NULL == dsaRsSignOpData) { + APRINTK("%s():Failed to get memory" + " for DSA RS Sign Op data struct\n", __FUNCTION__); + krp->krp_status = ENOMEM; + return ENOMEM; + } + + dsaRsSignOpData->K.pData = + icp_kmem_cache_alloc(drvDSARSSignKValue_zone, ICP_M_NOWAIT); + + if (NULL == dsaRsSignOpData->K.pData) { + APRINTK("%s():Failed to get memory" + " for DSA RS Sign Op Random value\n", __FUNCTION__); + ICP_CACHE_FREE(drvDSARSSign_zone, dsaRsSignOpData); + krp->krp_status = ENOMEM; + return ENOMEM; + } + + pR = icp_kmem_cache_zalloc(drvFlatBuffer_zone, ICP_M_NOWAIT); + if (NULL == pR) { + APRINTK("%s():Failed to get memory" + " for DSA signature R\n", __FUNCTION__); + ICP_CACHE_FREE(drvDSARSSignKValue_zone, + dsaRsSignOpData->K.pData); + ICP_CACHE_FREE(drvDSARSSign_zone, dsaRsSignOpData); + krp->krp_status = ENOMEM; + return ENOMEM; + } + + pS = icp_kmem_cache_zalloc(drvFlatBuffer_zone, ICP_M_NOWAIT); + if (NULL == pS) { + APRINTK("%s():Failed to get memory" + " for DSA signature S\n", __FUNCTION__); + icp_ocfDrvFreeFlatBuffer(pR); + ICP_CACHE_FREE(drvDSARSSignKValue_zone, + dsaRsSignOpData->K.pData); + ICP_CACHE_FREE(drvDSARSSign_zone, dsaRsSignOpData); + krp->krp_status = ENOMEM; + return ENOMEM; + } + + /*link prime number parameter for ease of processing */ + dsaRsSignOpData->P.pData = + krp->krp_param[ICP_DSA_SIGN_KRP_PARAM_PRIME_P_INDEX].crp_p; + BITS_TO_BYTES(dsaRsSignOpData->P.dataLenInBytes, + krp->krp_param[ICP_DSA_SIGN_KRP_PARAM_PRIME_P_INDEX]. + crp_nbits); + + icp_ocfDrvSwapBytes(dsaRsSignOpData->P.pData, + dsaRsSignOpData->P.dataLenInBytes); + + dsaRsSignOpData->Q.pData = + krp->krp_param[ICP_DSA_SIGN_KRP_PARAM_PRIME_Q_INDEX].crp_p; + BITS_TO_BYTES(dsaRsSignOpData->Q.dataLenInBytes, + krp->krp_param[ICP_DSA_SIGN_KRP_PARAM_PRIME_Q_INDEX]. + crp_nbits); + + icp_ocfDrvSwapBytes(dsaRsSignOpData->Q.pData, + dsaRsSignOpData->Q.dataLenInBytes); + + /*generate random number with equal buffer size to Prime value Q, + but value less than Q */ + dsaRsSignOpData->K.dataLenInBytes = dsaRsSignOpData->Q.dataLenInBytes; + + randGenOpData.generateBits = CPA_TRUE; + randGenOpData.lenInBytes = dsaRsSignOpData->K.dataLenInBytes; + + icp_ocfDrvPtrAndLenToFlatBuffer(dsaRsSignOpData->K.pData, + dsaRsSignOpData->K.dataLenInBytes, + &randData); + + doCheck = 0; + while (icp_ocfDrvCheckALessThanB(&(dsaRsSignOpData->K), + &(dsaRsSignOpData->Q), &doCheck)) { + + if (CPA_STATUS_SUCCESS + != cpaCyRandGen(CPA_INSTANCE_HANDLE_SINGLE, + NULL, NULL, &randGenOpData, &randData)) { + APRINTK("%s(): ERROR - Failed to generate DSA RS Sign K" + "value\n", __FUNCTION__); + icp_ocfDrvFreeFlatBuffer(pS); + icp_ocfDrvFreeFlatBuffer(pR); + ICP_CACHE_FREE(drvDSARSSignKValue_zone, + dsaRsSignOpData->K.pData); + ICP_CACHE_FREE(drvDSARSSign_zone, dsaRsSignOpData); + krp->krp_status = EAGAIN; + return EAGAIN; + } + + doCheck++; + if (DSA_SIGN_RAND_GEN_VAL_CHECK_MAX_ITERATIONS == doCheck) { + APRINTK("%s(): ERROR - Failed to find DSA RS Sign K " + "value less than Q value\n", __FUNCTION__); + icp_ocfDrvFreeFlatBuffer(pS); + icp_ocfDrvFreeFlatBuffer(pR); + ICP_CACHE_FREE(drvDSARSSignKValue_zone, + dsaRsSignOpData->K.pData); + ICP_CACHE_FREE(drvDSARSSign_zone, dsaRsSignOpData); + krp->krp_status = EAGAIN; + return EAGAIN; + } + + } + /*Rand Data - no need to swap bytes for pK */ + + /* Link parameters */ + dsaRsSignOpData->G.pData = + krp->krp_param[ICP_DSA_SIGN_KRP_PARAM_G_INDEX].crp_p; + BITS_TO_BYTES(dsaRsSignOpData->G.dataLenInBytes, + krp->krp_param[ICP_DSA_SIGN_KRP_PARAM_G_INDEX].crp_nbits); + + icp_ocfDrvSwapBytes(dsaRsSignOpData->G.pData, + dsaRsSignOpData->G.dataLenInBytes); + + dsaRsSignOpData->X.pData = + krp->krp_param[ICP_DSA_SIGN_KRP_PARAM_X_INDEX].crp_p; + BITS_TO_BYTES(dsaRsSignOpData->X.dataLenInBytes, + krp->krp_param[ICP_DSA_SIGN_KRP_PARAM_X_INDEX].crp_nbits); + icp_ocfDrvSwapBytes(dsaRsSignOpData->X.pData, + dsaRsSignOpData->X.dataLenInBytes); + + /*OpenSSL dgst parameter is left in big endian byte order, + therefore no byte swap is required */ + dsaRsSignOpData->M.pData = + krp->krp_param[ICP_DSA_SIGN_KRP_PARAM_DGST_INDEX].crp_p; + BITS_TO_BYTES(dsaRsSignOpData->M.dataLenInBytes, + krp->krp_param[ICP_DSA_SIGN_KRP_PARAM_DGST_INDEX]. + crp_nbits); + + /* Output Parameters */ + pS->pData = krp->krp_param[ICP_DSA_SIGN_KRP_PARAM_S_RESULT_INDEX].crp_p; + BITS_TO_BYTES(pS->dataLenInBytes, + krp->krp_param[ICP_DSA_SIGN_KRP_PARAM_S_RESULT_INDEX]. + crp_nbits); + + pR->pData = krp->krp_param[ICP_DSA_SIGN_KRP_PARAM_R_RESULT_INDEX].crp_p; + BITS_TO_BYTES(pR->dataLenInBytes, + krp->krp_param[ICP_DSA_SIGN_KRP_PARAM_R_RESULT_INDEX]. + crp_nbits); + + lacStatus = cpaCyDsaSignRS(CPA_INSTANCE_HANDLE_SINGLE, + icp_ocfDrvDsaRSSignCallBack, + callbackTag, dsaRsSignOpData, + &protocolStatus, pR, pS); + + if (CPA_STATUS_SUCCESS != lacStatus) { + EPRINTK("%s(): DSA RS Sign Operation failed (%d).\n", + __FUNCTION__, lacStatus); + krp->krp_status = ECANCELED; + icp_ocfDrvFreeFlatBuffer(pS); + icp_ocfDrvFreeFlatBuffer(pR); + ICP_CACHE_FREE(drvDSARSSignKValue_zone, + dsaRsSignOpData->K.pData); + ICP_CACHE_FREE(drvDSARSSign_zone, dsaRsSignOpData); + } + + return lacStatus; +} + +/* Name : icp_ocfDrvDsaVerify + * + * Description : This function will map DSA RS Verify from OCF to the LAC API. + * + */ +static int icp_ocfDrvDsaVerify(struct cryptkop *krp) +{ + CpaStatus lacStatus = CPA_STATUS_SUCCESS; + CpaCyDsaVerifyOpData *dsaVerifyOpData = NULL; + void *callbackTag = NULL; + CpaBoolean verifyStatus = CPA_FALSE; + + callbackTag = krp; + + dsaVerifyOpData = + icp_kmem_cache_zalloc(drvDSAVerify_zone, ICP_M_NOWAIT); + if (NULL == dsaVerifyOpData) { + APRINTK("%s():Failed to get memory" + " for DSA Verify Op data struct\n", __FUNCTION__); + krp->krp_status = ENOMEM; + return ENOMEM; + } + + /* Link parameters */ + dsaVerifyOpData->P.pData = + krp->krp_param[ICP_DSA_VERIFY_KRP_PARAM_PRIME_P_INDEX].crp_p; + BITS_TO_BYTES(dsaVerifyOpData->P.dataLenInBytes, + krp->krp_param[ICP_DSA_VERIFY_KRP_PARAM_PRIME_P_INDEX]. + crp_nbits); + icp_ocfDrvSwapBytes(dsaVerifyOpData->P.pData, + dsaVerifyOpData->P.dataLenInBytes); + + dsaVerifyOpData->Q.pData = + krp->krp_param[ICP_DSA_VERIFY_KRP_PARAM_PRIME_Q_INDEX].crp_p; + BITS_TO_BYTES(dsaVerifyOpData->Q.dataLenInBytes, + krp->krp_param[ICP_DSA_VERIFY_KRP_PARAM_PRIME_Q_INDEX]. + crp_nbits); + icp_ocfDrvSwapBytes(dsaVerifyOpData->Q.pData, + dsaVerifyOpData->Q.dataLenInBytes); + + dsaVerifyOpData->G.pData = + krp->krp_param[ICP_DSA_VERIFY_KRP_PARAM_G_INDEX].crp_p; + BITS_TO_BYTES(dsaVerifyOpData->G.dataLenInBytes, + krp->krp_param[ICP_DSA_VERIFY_KRP_PARAM_G_INDEX]. + crp_nbits); + icp_ocfDrvSwapBytes(dsaVerifyOpData->G.pData, + dsaVerifyOpData->G.dataLenInBytes); + + dsaVerifyOpData->Y.pData = + krp->krp_param[ICP_DSA_VERIFY_KRP_PARAM_PUBKEY_INDEX].crp_p; + BITS_TO_BYTES(dsaVerifyOpData->Y.dataLenInBytes, + krp->krp_param[ICP_DSA_VERIFY_KRP_PARAM_PUBKEY_INDEX]. + crp_nbits); + icp_ocfDrvSwapBytes(dsaVerifyOpData->Y.pData, + dsaVerifyOpData->Y.dataLenInBytes); + + /*OpenSSL dgst parameter is left in big endian byte order, + therefore no byte swap is required */ + dsaVerifyOpData->M.pData = + krp->krp_param[ICP_DSA_VERIFY_KRP_PARAM_DGST_INDEX].crp_p; + BITS_TO_BYTES(dsaVerifyOpData->M.dataLenInBytes, + krp->krp_param[ICP_DSA_VERIFY_KRP_PARAM_DGST_INDEX]. + crp_nbits); + + dsaVerifyOpData->R.pData = + krp->krp_param[ICP_DSA_VERIFY_KRP_PARAM_SIG_R_INDEX].crp_p; + BITS_TO_BYTES(dsaVerifyOpData->R.dataLenInBytes, + krp->krp_param[ICP_DSA_VERIFY_KRP_PARAM_SIG_R_INDEX]. + crp_nbits); + icp_ocfDrvSwapBytes(dsaVerifyOpData->R.pData, + dsaVerifyOpData->R.dataLenInBytes); + + dsaVerifyOpData->S.pData = + krp->krp_param[ICP_DSA_VERIFY_KRP_PARAM_SIG_S_INDEX].crp_p; + BITS_TO_BYTES(dsaVerifyOpData->S.dataLenInBytes, + krp->krp_param[ICP_DSA_VERIFY_KRP_PARAM_SIG_S_INDEX]. + crp_nbits); + icp_ocfDrvSwapBytes(dsaVerifyOpData->S.pData, + dsaVerifyOpData->S.dataLenInBytes); + + lacStatus = cpaCyDsaVerify(CPA_INSTANCE_HANDLE_SINGLE, + icp_ocfDrvDsaVerifyCallBack, + callbackTag, dsaVerifyOpData, &verifyStatus); + + if (CPA_STATUS_SUCCESS != lacStatus) { + EPRINTK("%s(): DSA Verify Operation failed (%d).\n", + __FUNCTION__, lacStatus); + ICP_CACHE_FREE(drvDSAVerify_zone, dsaVerifyOpData); + krp->krp_status = ECANCELED; + } + + return lacStatus; +} + +/* Name : icp_ocfDrvDhP1Callback + * + * Description : When this function returns it signifies that the LAC + * component has completed the DH operation. + */ +static void +icp_ocfDrvDhP1CallBack(void *callbackTag, + CpaStatus status, + void *pOpData, CpaFlatBuffer * pLocalOctetStringPV) +{ + struct cryptkop *krp = NULL; + CpaCyDhPhase1KeyGenOpData *pPhase1OpData = NULL; + + if (NULL == callbackTag) { + DPRINTK("%s(): Invalid input parameters - " + "callbackTag data is NULL\n", __FUNCTION__); + return; + } + krp = (struct cryptkop *)callbackTag; + + if (NULL == pOpData) { + DPRINTK("%s(): Invalid input parameters - " + "Operation Data is NULL\n", __FUNCTION__); + krp->krp_status = ECANCELED; + crypto_kdone(krp); + return; + } + pPhase1OpData = (CpaCyDhPhase1KeyGenOpData *) pOpData; + + if (NULL == pLocalOctetStringPV) { + DPRINTK("%s(): Invalid input parameters - " + "pLocalOctetStringPV Data is NULL\n", __FUNCTION__); + memset(pPhase1OpData, 0, sizeof(CpaCyDhPhase1KeyGenOpData)); + ICP_CACHE_FREE(drvDH_zone, pPhase1OpData); + krp->krp_status = ECANCELED; + crypto_kdone(krp); + return; + } + + if (CPA_STATUS_SUCCESS == status) { + krp->krp_status = CRYPTO_OP_SUCCESS; + } else { + APRINTK("%s(): Diffie Hellman Phase1 Key Gen failed - " + "Operation Status = %d\n", __FUNCTION__, status); + krp->krp_status = ECANCELED; + } + + icp_ocfDrvSwapBytes(pLocalOctetStringPV->pData, + pLocalOctetStringPV->dataLenInBytes); + + icp_ocfDrvFreeFlatBuffer(pLocalOctetStringPV); + memset(pPhase1OpData, 0, sizeof(CpaCyDhPhase1KeyGenOpData)); + ICP_CACHE_FREE(drvDH_zone, pPhase1OpData); + + crypto_kdone(krp); + + return; +} + +/* Name : icp_ocfDrvModExpCallBack + * + * Description : When this function returns it signifies that the LAC + * component has completed the Mod Exp operation. + */ +static void +icp_ocfDrvModExpCallBack(void *callbackTag, + CpaStatus status, + void *pOpdata, CpaFlatBuffer * pResult) +{ + struct cryptkop *krp = NULL; + CpaCyLnModExpOpData *pLnModExpOpData = NULL; + + if (NULL == callbackTag) { + DPRINTK("%s(): Invalid input parameters - " + "callbackTag data is NULL\n", __FUNCTION__); + return; + } + krp = (struct cryptkop *)callbackTag; + + if (NULL == pOpdata) { + DPRINTK("%s(): Invalid Mod Exp input parameters - " + "Operation Data is NULL\n", __FUNCTION__); + krp->krp_status = ECANCELED; + crypto_kdone(krp); + return; + } + pLnModExpOpData = (CpaCyLnModExpOpData *) pOpdata; + + if (NULL == pResult) { + DPRINTK("%s(): Invalid input parameters - " + "pResult data is NULL\n", __FUNCTION__); + krp->krp_status = ECANCELED; + memset(pLnModExpOpData, 0, sizeof(CpaCyLnModExpOpData)); + ICP_CACHE_FREE(drvLnModExp_zone, pLnModExpOpData); + crypto_kdone(krp); + return; + } + + if (CPA_STATUS_SUCCESS == status) { + krp->krp_status = CRYPTO_OP_SUCCESS; + } else { + APRINTK("%s(): LAC Mod Exp Operation failed - " + "Operation Status = %d\n", __FUNCTION__, status); + krp->krp_status = ECANCELED; + } + + icp_ocfDrvSwapBytes(pResult->pData, pResult->dataLenInBytes); + + /*switch base size value back to original */ + if (pLnModExpOpData->base.pData == + (uint8_t *) & (krp-> + krp_param[ICP_MOD_EXP_KRP_PARAM_BASE_INDEX]. + crp_nbits)) { + *((uint32_t *) pLnModExpOpData->base.pData) = + ntohl(*((uint32_t *) pLnModExpOpData->base.pData)); + } + icp_ocfDrvFreeFlatBuffer(pResult); + memset(pLnModExpOpData, 0, sizeof(CpaCyLnModExpOpData)); + ICP_CACHE_FREE(drvLnModExp_zone, pLnModExpOpData); + + crypto_kdone(krp); + + return; + +} + +/* Name : icp_ocfDrvModExpCRTCallBack + * + * Description : When this function returns it signifies that the LAC + * component has completed the Mod Exp CRT operation. + */ +static void +icp_ocfDrvModExpCRTCallBack(void *callbackTag, + CpaStatus status, + void *pOpData, CpaFlatBuffer * pOutputData) +{ + struct cryptkop *krp = NULL; + CpaCyRsaDecryptOpData *pDecryptData = NULL; + + if (NULL == callbackTag) { + DPRINTK("%s(): Invalid input parameters - " + "callbackTag data is NULL\n", __FUNCTION__); + return; + } + + krp = (struct cryptkop *)callbackTag; + + if (NULL == pOpData) { + DPRINTK("%s(): Invalid input parameters - " + "Operation Data is NULL\n", __FUNCTION__); + krp->krp_status = ECANCELED; + crypto_kdone(krp); + return; + } + pDecryptData = (CpaCyRsaDecryptOpData *) pOpData; + + if (NULL == pOutputData) { + DPRINTK("%s(): Invalid input parameter - " + "pOutputData is NULL\n", __FUNCTION__); + memset(pDecryptData->pRecipientPrivateKey, 0, + sizeof(CpaCyRsaPrivateKey)); + ICP_CACHE_FREE(drvRSAPrivateKey_zone, + pDecryptData->pRecipientPrivateKey); + memset(pDecryptData, 0, sizeof(CpaCyRsaDecryptOpData)); + ICP_CACHE_FREE(drvRSADecrypt_zone, pDecryptData); + krp->krp_status = ECANCELED; + crypto_kdone(krp); + return; + } + + if (CPA_STATUS_SUCCESS == status) { + krp->krp_status = CRYPTO_OP_SUCCESS; + } else { + APRINTK("%s(): LAC Mod Exp CRT operation failed - " + "Operation Status = %d\n", __FUNCTION__, status); + krp->krp_status = ECANCELED; + } + + icp_ocfDrvSwapBytes(pOutputData->pData, pOutputData->dataLenInBytes); + + icp_ocfDrvFreeFlatBuffer(pOutputData); + memset(pDecryptData->pRecipientPrivateKey, 0, + sizeof(CpaCyRsaPrivateKey)); + ICP_CACHE_FREE(drvRSAPrivateKey_zone, + pDecryptData->pRecipientPrivateKey); + memset(pDecryptData, 0, sizeof(CpaCyRsaDecryptOpData)); + ICP_CACHE_FREE(drvRSADecrypt_zone, pDecryptData); + + crypto_kdone(krp); + + return; +} + +/* Name : icp_ocfDrvDsaRSSignCallBack + * + * Description : When this function returns it signifies that the LAC + * component has completed the DSA RS sign operation. + */ +static void +icp_ocfDrvDsaRSSignCallBack(void *callbackTag, + CpaStatus status, + void *pOpData, + CpaBoolean protocolStatus, + CpaFlatBuffer * pR, CpaFlatBuffer * pS) +{ + struct cryptkop *krp = NULL; + CpaCyDsaRSSignOpData *pSignData = NULL; + + if (NULL == callbackTag) { + DPRINTK("%s(): Invalid input parameters - " + "callbackTag data is NULL\n", __FUNCTION__); + return; + } + + krp = (struct cryptkop *)callbackTag; + + if (NULL == pOpData) { + DPRINTK("%s(): Invalid input parameters - " + "Operation Data is NULL\n", __FUNCTION__); + krp->krp_status = ECANCELED; + crypto_kdone(krp); + return; + } + pSignData = (CpaCyDsaRSSignOpData *) pOpData; + + if (NULL == pR) { + DPRINTK("%s(): Invalid input parameter - " + "pR sign is NULL\n", __FUNCTION__); + icp_ocfDrvFreeFlatBuffer(pS); + ICP_CACHE_FREE(drvDSARSSign_zone, pSignData); + krp->krp_status = ECANCELED; + crypto_kdone(krp); + return; + } + + if (NULL == pS) { + DPRINTK("%s(): Invalid input parameter - " + "pS sign is NULL\n", __FUNCTION__); + icp_ocfDrvFreeFlatBuffer(pR); + ICP_CACHE_FREE(drvDSARSSign_zone, pSignData); + krp->krp_status = ECANCELED; + crypto_kdone(krp); + return; + } + + if (CPA_STATUS_SUCCESS != status) { + APRINTK("%s(): LAC DSA RS Sign operation failed - " + "Operation Status = %d\n", __FUNCTION__, status); + krp->krp_status = ECANCELED; + } else { + krp->krp_status = CRYPTO_OP_SUCCESS; + + if (CPA_TRUE != protocolStatus) { + DPRINTK("%s(): LAC DSA RS Sign operation failed due " + "to protocol error\n", __FUNCTION__); + krp->krp_status = EIO; + } + } + + /* Swap bytes only when the callback status is successful and + protocolStatus is set to true */ + if (CPA_STATUS_SUCCESS == status && CPA_TRUE == protocolStatus) { + icp_ocfDrvSwapBytes(pR->pData, pR->dataLenInBytes); + icp_ocfDrvSwapBytes(pS->pData, pS->dataLenInBytes); + } + + icp_ocfDrvFreeFlatBuffer(pR); + icp_ocfDrvFreeFlatBuffer(pS); + memset(pSignData->K.pData, 0, pSignData->K.dataLenInBytes); + ICP_CACHE_FREE(drvDSARSSignKValue_zone, pSignData->K.pData); + memset(pSignData, 0, sizeof(CpaCyDsaRSSignOpData)); + ICP_CACHE_FREE(drvDSARSSign_zone, pSignData); + crypto_kdone(krp); + + return; +} + +/* Name : icp_ocfDrvDsaVerifyCallback + * + * Description : When this function returns it signifies that the LAC + * component has completed the DSA Verify operation. + */ +static void +icp_ocfDrvDsaVerifyCallBack(void *callbackTag, + CpaStatus status, + void *pOpData, CpaBoolean verifyStatus) +{ + + struct cryptkop *krp = NULL; + CpaCyDsaVerifyOpData *pVerData = NULL; + + if (NULL == callbackTag) { + DPRINTK("%s(): Invalid input parameters - " + "callbackTag data is NULL\n", __FUNCTION__); + return; + } + + krp = (struct cryptkop *)callbackTag; + + if (NULL == pOpData) { + DPRINTK("%s(): Invalid input parameters - " + "Operation Data is NULL\n", __FUNCTION__); + krp->krp_status = ECANCELED; + crypto_kdone(krp); + return; + } + pVerData = (CpaCyDsaVerifyOpData *) pOpData; + + if (CPA_STATUS_SUCCESS != status) { + APRINTK("%s(): LAC DSA Verify operation failed - " + "Operation Status = %d\n", __FUNCTION__, status); + krp->krp_status = ECANCELED; + } else { + krp->krp_status = CRYPTO_OP_SUCCESS; + + if (CPA_TRUE != verifyStatus) { + DPRINTK("%s(): DSA signature invalid\n", __FUNCTION__); + krp->krp_status = EIO; + } + } + + /* Swap bytes only when the callback status is successful and + verifyStatus is set to true */ + /*Just swapping back the key values for now. Possibly all + swapped buffers need to be reverted */ + if (CPA_STATUS_SUCCESS == status && CPA_TRUE == verifyStatus) { + icp_ocfDrvSwapBytes(pVerData->R.pData, + pVerData->R.dataLenInBytes); + icp_ocfDrvSwapBytes(pVerData->S.pData, + pVerData->S.dataLenInBytes); + } + + memset(pVerData, 0, sizeof(CpaCyDsaVerifyOpData)); + ICP_CACHE_FREE(drvDSAVerify_zone, pVerData); + crypto_kdone(krp); + + return; +} diff --git a/target/linux/generic-2.4/files/crypto/ocf/ep80579/icp_common.c b/target/linux/generic-2.4/files/crypto/ocf/ep80579/icp_common.c new file mode 100644 index 0000000000..5d46c0adc6 --- /dev/null +++ b/target/linux/generic-2.4/files/crypto/ocf/ep80579/icp_common.c @@ -0,0 +1,773 @@ +/************************************************************************* + * + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2007,2008,2009 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + * The full GNU General Public License is included in this distribution + * in the file called LICENSE.GPL. + * + * Contact Information: + * Intel Corporation + * + * BSD LICENSE + * + * Copyright(c) 2007,2008,2009 Intel Corporation. All rights reserved. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * + * version: Security.L.1.0.2-229 + * + ***************************************************************************/ + +/* + * An OCF module that uses Intel® QuickAssist Integrated Accelerator to do the + * crypto. + * + * This driver requires the ICP Access Library that is available from Intel in + * order to operate. + */ + +#include "icp_ocf.h" + +#define ICP_OCF_COMP_NAME "ICP_OCF" +#define ICP_OCF_VER_MAIN (2) +#define ICP_OCF_VER_MJR (1) +#define ICP_OCF_VER_MNR (0) + +#define MAX_DEREG_RETRIES (100) +#define DEFAULT_DEREG_RETRIES (10) +#define DEFAULT_DEREG_DELAY_IN_JIFFIES (10) + +/* This defines the maximum number of sessions possible between OCF + and the OCF EP80579 Driver. If set to zero, there is no limit. */ +#define DEFAULT_OCF_TO_DRV_MAX_SESSION_COUNT (0) +#define NUM_SUPPORTED_CAPABILITIES (21) + +/*Slab zone names*/ +#define ICP_SESSION_DATA_NAME "icp_ocf.SesDat" +#define ICP_OP_DATA_NAME "icp_ocf.OpDat" +#define ICP_DH_NAME "icp_ocf.DH" +#define ICP_MODEXP_NAME "icp_ocf.ModExp" +#define ICP_RSA_DECRYPT_NAME "icp_ocf.RSAdec" +#define ICP_RSA_PKEY_NAME "icp_ocf.RSApk" +#define ICP_DSA_SIGN_NAME "icp_ocf.DSAsg" +#define ICP_DSA_VER_NAME "icp_ocf.DSAver" +#define ICP_RAND_VAL_NAME "icp_ocf.DSArnd" +#define ICP_FLAT_BUFF_NAME "icp_ocf.FB" + +/*Slabs zones*/ +icp_kmem_cache drvSessionData_zone = NULL; +icp_kmem_cache drvOpData_zone = NULL; +icp_kmem_cache drvDH_zone = NULL; +icp_kmem_cache drvLnModExp_zone = NULL; +icp_kmem_cache drvRSADecrypt_zone = NULL; +icp_kmem_cache drvRSAPrivateKey_zone = NULL; +icp_kmem_cache drvDSARSSign_zone = NULL; +icp_kmem_cache drvDSARSSignKValue_zone = NULL; +icp_kmem_cache drvDSAVerify_zone = NULL; + +/*Slab zones for flatbuffers and bufferlist*/ +icp_kmem_cache drvFlatBuffer_zone = NULL; + +static inline int icp_cache_null_check(void) +{ + return (drvSessionData_zone && drvOpData_zone + && drvDH_zone && drvLnModExp_zone && drvRSADecrypt_zone + && drvRSAPrivateKey_zone && drvDSARSSign_zone + && drvDSARSSign_zone && drvDSARSSignKValue_zone + && drvDSAVerify_zone && drvFlatBuffer_zone); +} + +/*Function to free all allocated slab caches before exiting the module*/ +static void icp_ocfDrvFreeCaches(void); + +int32_t icp_ocfDrvDriverId = INVALID_DRIVER_ID; + +/* Module parameter - gives the number of times LAC deregistration shall be + re-tried */ +int num_dereg_retries = DEFAULT_DEREG_RETRIES; + +/* Module parameter - gives the delay time in jiffies before a LAC session + shall be attempted to be deregistered again */ +int dereg_retry_delay_in_jiffies = DEFAULT_DEREG_DELAY_IN_JIFFIES; + +/* Module parameter - gives the maximum number of sessions possible between + OCF and the OCF EP80579 Driver. If set to zero, there is no limit.*/ +int max_sessions = DEFAULT_OCF_TO_DRV_MAX_SESSION_COUNT; + +/* This is set when the module is removed from the system, no further + processing can take place if this is set */ +icp_atomic_t icp_ocfDrvIsExiting = ICP_ATOMIC_INIT(0); + +/* This is used to show how many lac sessions were not deregistered*/ +icp_atomic_t lac_session_failed_dereg_count = ICP_ATOMIC_INIT(0); + +/* This is used to track the number of registered sessions between OCF and + * and the OCF EP80579 driver, when max_session is set to value other than + * zero. This ensures that the max_session set for the OCF and the driver + * is equal to the LAC registered sessions */ +icp_atomic_t num_ocf_to_drv_registered_sessions = ICP_ATOMIC_INIT(0); + +/* Head of linked list used to store session data */ +icp_drvSessionListHead_t icp_ocfDrvGlobalSymListHead; +icp_drvSessionListHead_t icp_ocfDrvGlobalSymListHead_FreeMemList; + +icp_spinlock_t icp_ocfDrvSymSessInfoListSpinlock; + +/*Below pointer is only used in linux, FreeBSD uses the name to +create its own variable name*/ +icp_workqueue *icp_ocfDrvFreeLacSessionWorkQ = NULL; +ICP_WORKQUEUE_DEFINE_THREAD(icp_ocfDrvFreeLacSessionWorkQ); + +struct icp_drvBuffListInfo defBuffListInfo; + +/* Name : icp_ocfDrvInit + * + * Description : This function will register all the symmetric and asymmetric + * functionality that will be accelerated by the hardware. It will also + * get a unique driver ID from the OCF and initialise all slab caches + */ +ICP_MODULE_INIT_FUNC(icp_ocfDrvInit) +{ + int ocfStatus = 0; + + IPRINTK("=== %s ver %d.%d.%d ===\n", ICP_OCF_COMP_NAME, + ICP_OCF_VER_MAIN, ICP_OCF_VER_MJR, ICP_OCF_VER_MNR); + + if (MAX_DEREG_RETRIES < num_dereg_retries) { + EPRINTK("Session deregistration retry count set to greater " + "than %d", MAX_DEREG_RETRIES); + icp_module_return_code(EINVAL); + } + + /* Initialize and Start the Cryptographic component */ + if (CPA_STATUS_SUCCESS != + cpaCyStartInstance(CPA_INSTANCE_HANDLE_SINGLE)) { + EPRINTK("Failed to initialize and start the instance " + "of the Cryptographic component.\n"); + return icp_module_return_code(EINVAL); + } + + icp_spin_lock_init(&icp_ocfDrvSymSessInfoListSpinlock); + + /* Set the default size of BufferList to allocate */ + memset(&defBuffListInfo, 0, sizeof(struct icp_drvBuffListInfo)); + if (ICP_OCF_DRV_STATUS_SUCCESS != + icp_ocfDrvBufferListMemInfo(ICP_OCF_DRV_DEFAULT_BUFFLIST_ARRAYS, + &defBuffListInfo)) { + EPRINTK("Failed to get bufferlist memory info.\n"); + return icp_module_return_code(ENOMEM); + } + + /*Register OCF EP80579 Driver with OCF */ + icp_ocfDrvDriverId = ICP_CRYPTO_GET_DRIVERID(); + + if (icp_ocfDrvDriverId < 0) { + EPRINTK("%s : ICP driver failed to register with OCF!\n", + __FUNCTION__); + return icp_module_return_code(ENODEV); + } + + /*Create all the slab caches used by the OCF EP80579 Driver */ + drvSessionData_zone = + ICP_CACHE_CREATE(ICP_SESSION_DATA_NAME, struct icp_drvSessionData); + + /* + * Allocation of the OpData includes the allocation space for meta data. + * The memory after the opData structure is reserved for this meta data. + */ + drvOpData_zone = + icp_kmem_cache_create(ICP_OP_DATA_NAME, + sizeof(struct icp_drvOpData) + + defBuffListInfo.metaSize, + ICP_KERNEL_CACHE_ALIGN, + ICP_KERNEL_CACHE_NOINIT); + + drvDH_zone = ICP_CACHE_CREATE(ICP_DH_NAME, CpaCyDhPhase1KeyGenOpData); + + drvLnModExp_zone = + ICP_CACHE_CREATE(ICP_MODEXP_NAME, CpaCyLnModExpOpData); + + drvRSADecrypt_zone = + ICP_CACHE_CREATE(ICP_RSA_DECRYPT_NAME, CpaCyRsaDecryptOpData); + + drvRSAPrivateKey_zone = + ICP_CACHE_CREATE(ICP_RSA_PKEY_NAME, CpaCyRsaPrivateKey); + + drvDSARSSign_zone = + ICP_CACHE_CREATE(ICP_DSA_SIGN_NAME, CpaCyDsaRSSignOpData); + + /*too awkward to use a macro here */ + drvDSARSSignKValue_zone = + ICP_CACHE_CREATE(ICP_RAND_VAL_NAME, + DSA_RS_SIGN_PRIMEQ_SIZE_IN_BYTES); + + drvDSAVerify_zone = + ICP_CACHE_CREATE(ICP_DSA_VER_NAME, CpaCyDsaVerifyOpData); + + drvFlatBuffer_zone = + ICP_CACHE_CREATE(ICP_FLAT_BUFF_NAME, CpaFlatBuffer); + + if (0 == icp_cache_null_check()) { + icp_ocfDrvFreeCaches(); + EPRINTK("%s() line %d: Not enough memory!\n", + __FUNCTION__, __LINE__); + return ENOMEM; + } + + /* Register the ICP symmetric crypto support. */ + ICP_REG_SYM_WITH_OCF(icp_ocfDrvDriverId, CRYPTO_NULL_CBC, ocfStatus); + ICP_REG_SYM_WITH_OCF(icp_ocfDrvDriverId, CRYPTO_DES_CBC, ocfStatus); + ICP_REG_SYM_WITH_OCF(icp_ocfDrvDriverId, CRYPTO_3DES_CBC, ocfStatus); + ICP_REG_SYM_WITH_OCF(icp_ocfDrvDriverId, CRYPTO_AES_CBC, ocfStatus); + ICP_REG_SYM_WITH_OCF(icp_ocfDrvDriverId, CRYPTO_ARC4, ocfStatus); + ICP_REG_SYM_WITH_OCF(icp_ocfDrvDriverId, CRYPTO_MD5, ocfStatus); + ICP_REG_SYM_WITH_OCF(icp_ocfDrvDriverId, CRYPTO_MD5_HMAC, ocfStatus); + ICP_REG_SYM_WITH_OCF(icp_ocfDrvDriverId, CRYPTO_SHA1, ocfStatus); + ICP_REG_SYM_WITH_OCF(icp_ocfDrvDriverId, CRYPTO_SHA1_HMAC, ocfStatus); + ICP_REG_SYM_WITH_OCF(icp_ocfDrvDriverId, CRYPTO_SHA2_256, ocfStatus); + ICP_REG_SYM_WITH_OCF(icp_ocfDrvDriverId, CRYPTO_SHA2_256_HMAC, + ocfStatus); + ICP_REG_SYM_WITH_OCF(icp_ocfDrvDriverId, CRYPTO_SHA2_384, ocfStatus); + ICP_REG_SYM_WITH_OCF(icp_ocfDrvDriverId, CRYPTO_SHA2_384_HMAC, + ocfStatus); + ICP_REG_SYM_WITH_OCF(icp_ocfDrvDriverId, CRYPTO_SHA2_512, ocfStatus); + ICP_REG_SYM_WITH_OCF(icp_ocfDrvDriverId, CRYPTO_SHA2_512_HMAC, + ocfStatus); + + /* Register the ICP asymmetric algorithm support */ + ICP_REG_ASYM_WITH_OCF(icp_ocfDrvDriverId, CRK_DH_COMPUTE_KEY, + ocfStatus); + ICP_REG_ASYM_WITH_OCF(icp_ocfDrvDriverId, CRK_MOD_EXP, ocfStatus); + ICP_REG_ASYM_WITH_OCF(icp_ocfDrvDriverId, CRK_MOD_EXP_CRT, ocfStatus); + ICP_REG_ASYM_WITH_OCF(icp_ocfDrvDriverId, CRK_DSA_SIGN, ocfStatus); + ICP_REG_ASYM_WITH_OCF(icp_ocfDrvDriverId, CRK_DSA_VERIFY, ocfStatus); + + /* Register the ICP random number generator support */ + ICP_REG_RAND_WITH_OCF(icp_ocfDrvDriverId, + icp_ocfDrvReadRandom, NULL, ocfStatus); + + if (OCF_ZERO_FUNCTIONALITY_REGISTERED == ocfStatus) { + DPRINTK("%s: Failed to register any device capabilities\n", + __FUNCTION__); + icp_ocfDrvFreeCaches(); + icp_ocfDrvDriverId = INVALID_DRIVER_ID; + return icp_module_return_code(ECANCELED); + } + + DPRINTK("%s: Registered %d of %d device capabilities\n", + __FUNCTION__, ocfStatus, NUM_SUPPORTED_CAPABILITIES); + + /*Session data linked list used during module exit */ + ICP_INIT_LIST_HEAD(&icp_ocfDrvGlobalSymListHead); + ICP_INIT_LIST_HEAD(&icp_ocfDrvGlobalSymListHead_FreeMemList); + + ICP_WORKQUEUE_CREATE(icp_ocfDrvFreeLacSessionWorkQ, "icpwq"); + if (ICP_WORKQUEUE_NULL_CHECK(icp_ocfDrvFreeLacSessionWorkQ)) { + EPRINTK("%s: Failed to create single " + "thread workqueue\n", __FUNCTION__); + icp_ocfDrvFreeCaches(); + icp_ocfDrvDriverId = INVALID_DRIVER_ID; + return icp_module_return_code(ENOMEM); + } + + return icp_module_return_code(0); +} + +/* Name : icp_ocfDrvExit + * + * Description : This function will deregister all the symmetric sessions + * registered with the LAC component. It will also deregister all symmetric + * and asymmetric functionality that can be accelerated by the hardware via OCF + * and random number generation if it is enabled. + */ +ICP_MODULE_EXIT_FUNC(icp_ocfDrvExit) +{ + CpaStatus lacStatus = CPA_STATUS_SUCCESS; + struct icp_drvSessionData *sessionData = NULL; + struct icp_drvSessionData *tempSessionData = NULL; + int i, remaining_delay_time_in_jiffies = 0; + + /* For FreeBSD the invariant macro below makes function to return */ + /* with EBUSY value in the case of any session which has been regi- */ + /* stered with LAC not being deregistered. */ + /* The Linux implementation is empty since it is purely to compensate */ + /* for a limitation of the FreeBSD 7.1 Opencrypto framework. */ + + ICP_MODULE_EXIT_INV(); + + /* There is a possibility of a process or new session command being */ + /* sent before this variable is incremented. The aim of this variable */ + /* is to stop a loop of calls creating a deadlock situation which */ + /* would prevent the driver from exiting. */ + icp_atomic_set(&icp_ocfDrvIsExiting, 1); + + /*Existing sessions will be routed to another driver after these calls */ + crypto_unregister_all(icp_ocfDrvDriverId); + crypto_runregister_all(icp_ocfDrvDriverId); + + if (ICP_WORKQUEUE_NULL_CHECK(icp_ocfDrvFreeLacSessionWorkQ)) { + DPRINTK("%s: workqueue already " + "destroyed, therefore module exit " + " function already called. Exiting.\n", __FUNCTION__); + return ICP_MODULE_EXIT_FUNC_RETURN_VAL; + } + /*If any sessions are waiting to be deregistered, do that. This also + flushes the work queue */ + ICP_WORKQUEUE_DESTROY(icp_ocfDrvFreeLacSessionWorkQ); + + /*ENTER CRITICAL SECTION */ + icp_spin_lockbh_lock(&icp_ocfDrvSymSessInfoListSpinlock); + + ICP_LIST_FOR_EACH_ENTRY_SAFE(tempSessionData, sessionData, + &icp_ocfDrvGlobalSymListHead, listNode) { + for (i = 0; i < num_dereg_retries; i++) { + /*No harm if bad input - LAC will handle error cases */ + if (ICP_SESSION_RUNNING == tempSessionData->inUse) { + lacStatus = + cpaCySymRemoveSession + (CPA_INSTANCE_HANDLE_SINGLE, + tempSessionData->sessHandle); + if (CPA_STATUS_SUCCESS == lacStatus) { + /* Succesfully deregistered */ + break; + } else if (CPA_STATUS_RETRY != lacStatus) { + icp_atomic_inc + (&lac_session_failed_dereg_count); + break; + } + + /*schedule_timout returns the time left for completion if + * this task is set to TASK_INTERRUPTIBLE */ + remaining_delay_time_in_jiffies = + dereg_retry_delay_in_jiffies; + while (0 > remaining_delay_time_in_jiffies) { + remaining_delay_time_in_jiffies = + icp_schedule_timeout + (&icp_ocfDrvSymSessInfoListSpinlock, + remaining_delay_time_in_jiffies); + } + + DPRINTK + ("%s(): Retry %d to deregistrate the session\n", + __FUNCTION__, i); + } + } + + /*remove from current list */ + ICP_LIST_DEL(tempSessionData, listNode); + /*add to free mem linked list */ + ICP_LIST_ADD(tempSessionData, + &icp_ocfDrvGlobalSymListHead_FreeMemList, + listNode); + + } + + /*EXIT CRITICAL SECTION */ + icp_spin_lockbh_unlock(&icp_ocfDrvSymSessInfoListSpinlock); + + /*set back to initial values */ + sessionData = NULL; + /*still have a reference in our list! */ + tempSessionData = NULL; + /*free memory */ + + ICP_LIST_FOR_EACH_ENTRY_SAFE(tempSessionData, sessionData, + &icp_ocfDrvGlobalSymListHead_FreeMemList, + listNode) { + + ICP_LIST_DEL(tempSessionData, listNode); + /* Free allocated CpaCySymSessionCtx */ + if (NULL != tempSessionData->sessHandle) { + icp_kfree(tempSessionData->sessHandle); + } + memset(tempSessionData, 0, sizeof(struct icp_drvSessionData)); + ICP_CACHE_FREE(drvSessionData_zone, tempSessionData); + } + + if (0 != icp_atomic_read(&lac_session_failed_dereg_count)) { + DPRINTK("%s(): %d LAC sessions were not deregistered " + "correctly. This is not a clean exit! \n", + __FUNCTION__, + icp_atomic_read(&lac_session_failed_dereg_count)); + } + + icp_ocfDrvFreeCaches(); + icp_ocfDrvDriverId = INVALID_DRIVER_ID; + + icp_spin_lock_destroy(&icp_ocfDrvSymSessInfoListSpinlock); + + /* Shutdown the Cryptographic component */ + lacStatus = cpaCyStopInstance(CPA_INSTANCE_HANDLE_SINGLE); + if (CPA_STATUS_SUCCESS != lacStatus) { + DPRINTK("%s(): Failed to stop instance of the " + "Cryptographic component.(status == %d)\n", + __FUNCTION__, lacStatus); + } + + return ICP_MODULE_EXIT_FUNC_RETURN_VAL; +} + +/* Name : icp_ocfDrvFreeCaches + * + * Description : This function deregisters all slab caches + */ +static void icp_ocfDrvFreeCaches(void) +{ + icp_atomic_set(&icp_ocfDrvIsExiting, 1); + + /*Sym Zones */ + ICP_CACHE_DESTROY(drvSessionData_zone); + ICP_CACHE_DESTROY(drvOpData_zone); + + /*Asym zones */ + ICP_CACHE_DESTROY(drvDH_zone); + ICP_CACHE_DESTROY(drvLnModExp_zone); + ICP_CACHE_DESTROY(drvRSADecrypt_zone); + ICP_CACHE_DESTROY(drvRSAPrivateKey_zone); + ICP_CACHE_DESTROY(drvDSARSSignKValue_zone); + ICP_CACHE_DESTROY(drvDSARSSign_zone); + ICP_CACHE_DESTROY(drvDSAVerify_zone); + + /*FlatBuffer and BufferList Zones */ + ICP_CACHE_DESTROY(drvFlatBuffer_zone); + +} + +/* Name : icp_ocfDrvDeregRetry + * + * Description : This function will try to farm the session deregistration + * off to a work queue. If it fails, nothing more can be done and it + * returns an error + */ +int icp_ocfDrvDeregRetry(CpaCySymSessionCtx sessionToDeregister) +{ + struct icp_ocfDrvFreeLacSession *workstore = NULL; + + DPRINTK("%s(): Retry - Deregistering session (%p)\n", + __FUNCTION__, sessionToDeregister); + + /*make sure the session is not available to be allocated during this + process */ + icp_atomic_inc(&lac_session_failed_dereg_count); + + /*Farm off to work queue */ + workstore = + icp_kmalloc(sizeof(struct icp_ocfDrvFreeLacSession), ICP_M_NOWAIT); + if (NULL == workstore) { + DPRINTK("%s(): unable to free session - no memory available " + "for work queue\n", __FUNCTION__); + return ENOMEM; + } + + workstore->sessionToDeregister = sessionToDeregister; + + icp_init_work(&(workstore->work), + icp_ocfDrvDeferedFreeLacSessionTaskFn, workstore); + + ICP_WORKQUEUE_ENQUEUE(icp_ocfDrvFreeLacSessionWorkQ, + &(workstore->work)); + + return ICP_OCF_DRV_STATUS_SUCCESS; + +} + +/* Name : icp_ocfDrvDeferedFreeLacSessionProcess + * + * Description : This function will retry (module input parameter) + * 'num_dereg_retries' times to deregister any symmetric session that recieves a + * CPA_STATUS_RETRY message from the LAC component. This function is run in + * Thread context because it is called from a worker thread + */ +void icp_ocfDrvDeferedFreeLacSessionProcess(void *arg) +{ + struct icp_ocfDrvFreeLacSession *workstore = NULL; + CpaCySymSessionCtx sessionToDeregister = NULL; + int i = 0; + int remaining_delay_time_in_jiffies = 0; + CpaStatus lacStatus = CPA_STATUS_SUCCESS; + + workstore = (struct icp_ocfDrvFreeLacSession *)arg; + if (NULL == workstore) { + DPRINTK("%s() function called with null parameter \n", + __FUNCTION__); + return; + } + + sessionToDeregister = workstore->sessionToDeregister; + icp_kfree(workstore); + + /*if exiting, give deregistration one more blast only */ + if (icp_atomic_read(&icp_ocfDrvIsExiting) == CPA_TRUE) { + lacStatus = cpaCySymRemoveSession(CPA_INSTANCE_HANDLE_SINGLE, + sessionToDeregister); + + if (lacStatus != CPA_STATUS_SUCCESS) { + DPRINTK("%s() Failed to Dereg LAC session %p " + "during module exit\n", __FUNCTION__, + sessionToDeregister); + return; + } + + icp_atomic_dec(&lac_session_failed_dereg_count); + return; + } + + for (i = 0; i <= num_dereg_retries; i++) { + lacStatus = cpaCySymRemoveSession(CPA_INSTANCE_HANDLE_SINGLE, + sessionToDeregister); + + if (lacStatus == CPA_STATUS_SUCCESS) { + icp_atomic_dec(&lac_session_failed_dereg_count); + return; + } + if (lacStatus != CPA_STATUS_RETRY) { + DPRINTK("%s() Failed to deregister session - lacStatus " + " = %d", __FUNCTION__, lacStatus); + break; + } + + /*schedule_timout returns the time left for completion if this + task is set to TASK_INTERRUPTIBLE */ + remaining_delay_time_in_jiffies = dereg_retry_delay_in_jiffies; + while (0 < remaining_delay_time_in_jiffies) { + remaining_delay_time_in_jiffies = + icp_schedule_timeout(NULL, + remaining_delay_time_in_jiffies); + } + + } + + DPRINTK("%s(): Unable to deregister session\n", __FUNCTION__); + DPRINTK("%s(): Number of unavailable LAC sessions = %d\n", __FUNCTION__, + icp_atomic_read(&lac_session_failed_dereg_count)); +} + +/* Name : icp_ocfDrvPtrAndLenToFlatBuffer + * + * Description : This function converts a "pointer and length" buffer + * structure to Fredericksburg Flat Buffer (CpaFlatBuffer) format. + * + * This function assumes that the data passed in are valid. + */ +inline void +icp_ocfDrvPtrAndLenToFlatBuffer(void *pData, uint32_t len, + CpaFlatBuffer * pFlatBuffer) +{ + pFlatBuffer->pData = pData; + pFlatBuffer->dataLenInBytes = len; +} + +/* Name : icp_ocfDrvPtrAndLenToBufferList + * + * Description : This function converts a "pointer and length" buffer + * structure to Fredericksburg Scatter/Gather Buffer (CpaBufferList) format. + * + * This function assumes that the data passed in are valid. + */ +inline void +icp_ocfDrvPtrAndLenToBufferList(void *pDataIn, uint32_t length, + CpaBufferList * pBufferList) +{ + pBufferList->numBuffers = 1; + pBufferList->pBuffers->pData = pDataIn; + pBufferList->pBuffers->dataLenInBytes = length; +} + +/* Name : icp_ocfDrvBufferListToPtrAndLen + * + * Description : This function converts Fredericksburg Scatter/Gather Buffer + * (CpaBufferList) format to a "pointer and length" buffer structure. + * + * This function assumes that the data passed in are valid. + */ +inline void +icp_ocfDrvBufferListToPtrAndLen(CpaBufferList * pBufferList, + void **ppDataOut, uint32_t * pLength) +{ + *ppDataOut = pBufferList->pBuffers->pData; + *pLength = pBufferList->pBuffers->dataLenInBytes; +} + +/* Name : icp_ocfDrvBufferListMemInfo + * + * Description : This function will set the number of flat buffers in + * bufferlist, the size of memory to allocate for the pPrivateMetaData + * member of the CpaBufferList. + */ +int +icp_ocfDrvBufferListMemInfo(uint16_t numBuffers, + struct icp_drvBuffListInfo *buffListInfo) +{ + buffListInfo->numBuffers = numBuffers; + + if (CPA_STATUS_SUCCESS != + cpaCyBufferListGetMetaSize(CPA_INSTANCE_HANDLE_SINGLE, + buffListInfo->numBuffers, + &(buffListInfo->metaSize))) { + EPRINTK("%s() Failed to get buffer list meta size.\n", + __FUNCTION__); + return ICP_OCF_DRV_STATUS_FAIL; + } + + return ICP_OCF_DRV_STATUS_SUCCESS; +} + +/* Name : icp_ocfDrvFreeFlatBuffer + * + * Description : This function will deallocate flat buffer. + */ +inline void icp_ocfDrvFreeFlatBuffer(CpaFlatBuffer * pFlatBuffer) +{ + if (pFlatBuffer != NULL) { + memset(pFlatBuffer, 0, sizeof(CpaFlatBuffer)); + ICP_CACHE_FREE(drvFlatBuffer_zone, pFlatBuffer); + } +} + +/* Name : icp_ocfDrvAllocMetaData + * + * Description : This function will allocate memory for the + * pPrivateMetaData member of CpaBufferList. + */ +inline int +icp_ocfDrvAllocMetaData(CpaBufferList * pBufferList, + struct icp_drvOpData *pOpData) +{ + Cpa32U metaSize = 0; + + if (pBufferList->numBuffers <= ICP_OCF_DRV_DEFAULT_BUFFLIST_ARRAYS) { + uint8_t *pOpDataStartAddr = (uint8_t *) pOpData; + + if (0 == defBuffListInfo.metaSize) { + pBufferList->pPrivateMetaData = NULL; + return ICP_OCF_DRV_STATUS_SUCCESS; + } + /* + * The meta data allocation has been included as part of the + * op data. It has been pre-allocated in memory just after the + * icp_drvOpData structure. + */ + pBufferList->pPrivateMetaData = (void *)(pOpDataStartAddr + + sizeof(struct + icp_drvOpData)); + } else { + if (CPA_STATUS_SUCCESS != + cpaCyBufferListGetMetaSize(CPA_INSTANCE_HANDLE_SINGLE, + pBufferList->numBuffers, + &metaSize)) { + EPRINTK("%s() Failed to get buffer list meta size.\n", + __FUNCTION__); + return ICP_OCF_DRV_STATUS_FAIL; + } + + if (0 == metaSize) { + pBufferList->pPrivateMetaData = NULL; + return ICP_OCF_DRV_STATUS_SUCCESS; + } + + pBufferList->pPrivateMetaData = + icp_kmalloc(metaSize, ICP_M_NOWAIT); + } + if (NULL == pBufferList->pPrivateMetaData) { + EPRINTK("%s() Failed to allocate pPrivateMetaData.\n", + __FUNCTION__); + return ICP_OCF_DRV_STATUS_FAIL; + } + + return ICP_OCF_DRV_STATUS_SUCCESS; +} + +/* Name : icp_ocfDrvFreeMetaData + * + * Description : This function will deallocate pPrivateMetaData memory. + */ +inline void icp_ocfDrvFreeMetaData(CpaBufferList * pBufferList) +{ + if (NULL == pBufferList->pPrivateMetaData) { + return; + } + + /* + * Only free the meta data if the BufferList has more than + * ICP_OCF_DRV_DEFAULT_BUFFLIST_ARRAYS number of buffers. + * Otherwise, the meta data shall be freed when the icp_drvOpData is + * freed. + */ + if (ICP_OCF_DRV_DEFAULT_BUFFLIST_ARRAYS < pBufferList->numBuffers) { + icp_kfree(pBufferList->pPrivateMetaData); + } +} + +/* Module declaration, init and exit functions */ +ICP_DECLARE_MODULE(icp_ocf, icp_ocfDrvInit, icp_ocfDrvExit); +ICP_MODULE_DESCRIPTION("OCF Driver for Intel Quick Assist crypto acceleration"); +ICP_MODULE_VERSION(icp_ocf, ICP_OCF_VER_MJR); +ICP_MODULE_LICENSE("Dual BSD/GPL"); +ICP_MODULE_AUTHOR("Intel"); + +/* Module parameters */ +ICP_MODULE_PARAM_INT(icp_ocf, num_dereg_retries, + "Number of times to retry LAC Sym Session Deregistration. " + "Default 10, Max 100"); +ICP_MODULE_PARAM_INT(icp_ocf, dereg_retry_delay_in_jiffies, "Delay in jiffies " + "(added to a schedule() function call) before a LAC Sym " + "Session Dereg is retried. Default 10"); +ICP_MODULE_PARAM_INT(icp_ocf, max_sessions, + "This sets the maximum number of sessions " + "between OCF and this driver. If this value is set to zero," + "max session count checking is disabled. Default is zero(0)"); + +/* Module dependencies */ +#define MODULE_MIN_VER 1 +#define CRYPTO_MAX_VER 3 +#define LAC_MAX_VER 2 + +ICP_MODULE_DEPEND(icp_ocf, crypto, MODULE_MIN_VER, MODULE_MIN_VER, + CRYPTO_MAX_VER); +ICP_MODULE_DEPEND(icp_ocf, cryptodev, MODULE_MIN_VER, MODULE_MIN_VER, + CRYPTO_MAX_VER); +ICP_MODULE_DEPEND(icp_ocf, icp_crypto, MODULE_MIN_VER, MODULE_MIN_VER, + LAC_MAX_VER); diff --git a/target/linux/generic-2.4/files/crypto/ocf/ep80579/icp_ocf.h b/target/linux/generic-2.4/files/crypto/ocf/ep80579/icp_ocf.h new file mode 100644 index 0000000000..d9dde87402 --- /dev/null +++ b/target/linux/generic-2.4/files/crypto/ocf/ep80579/icp_ocf.h @@ -0,0 +1,376 @@ +/*************************************************************************** + * + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2007,2008,2009 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + * The full GNU General Public License is included in this distribution + * in the file called LICENSE.GPL. + * + * Contact Information: + * Intel Corporation + * + * BSD LICENSE + * + * Copyright(c) 2007,2008,2009 Intel Corporation. All rights reserved. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * + * version: Security.L.1.0.2-229 + * + ***************************************************************************/ + +/* + * OCF driver header file for the Intel ICP processor. + */ + +#ifndef ICP_OCF_H_ +#define ICP_OCF_H_ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "icp_os.h" + +#define NUM_BITS_IN_BYTE (8) +#define NUM_BITS_IN_BYTE_MINUS_ONE (NUM_BITS_IN_BYTE -1) +#define INVALID_DRIVER_ID (-1) +#define RETURN_RAND_NUM_GEN_FAILED (-1) + +/*This is the max block cipher initialisation vector*/ +#define MAX_IV_LEN_IN_BYTES (20) +/*This is used to check whether the OCF to this driver session limit has + been disabled*/ +#define NO_OCF_TO_DRV_MAX_SESSIONS (0) + +/*OCF values mapped here*/ +#define ICP_SHA1_DIGEST_SIZE_IN_BYTES (SHA1_HASH_LEN) +#define ICP_SHA256_DIGEST_SIZE_IN_BYTES (SHA2_256_HASH_LEN) +#define ICP_SHA384_DIGEST_SIZE_IN_BYTES (SHA2_384_HASH_LEN) +#define ICP_SHA512_DIGEST_SIZE_IN_BYTES (SHA2_512_HASH_LEN) +#define ICP_MD5_DIGEST_SIZE_IN_BYTES (MD5_HASH_LEN) +#define ARC4_COUNTER_LEN (ARC4_BLOCK_LEN) + +#define OCF_REGISTRATION_STATUS_SUCCESS (0) +#define OCF_ZERO_FUNCTIONALITY_REGISTERED (0) +#define ICP_OCF_DRV_NO_CRYPTO_PROCESS_ERROR (0) +#define ICP_OCF_DRV_STATUS_SUCCESS (0) +#define ICP_OCF_DRV_STATUS_FAIL (1) + +/*Turn on/off debug options*/ +#define ICP_OCF_PRINT_DEBUG_MESSAGES (0) +#define ICP_OCF_PRINT_KERN_ALERT (1) +#define ICP_OCF_PRINT_KERN_ERRS (1) + +#if ICP_OCF_PRINT_DEBUG_MESSAGES == 1 +#define DPRINTK(args...) \ +{ \ + ICP_IPRINTK(args); \ +} + +#else //ICP_OCF_PRINT_DEBUG_MESSAGES == 1 + +#define DPRINTK(args...) + +#endif //ICP_OCF_PRINT_DEBUG_MESSAGES == 1 + +#if ICP_OCF_PRINT_KERN_ALERT == 1 +#define APRINTK(args...) \ +{ \ + ICP_APRINTK(args); \ +} + +#else //ICP_OCF_PRINT_KERN_ALERT == 1 + +#define APRINTK(args...) + +#endif //ICP_OCF_PRINT_KERN_ALERT == 1 + +#if ICP_OCF_PRINT_KERN_ERRS == 1 +#define EPRINTK(args...) \ +{ \ + ICP_EPRINTK(args); \ +} + +#else //ICP_OCF_PRINT_KERN_ERRS == 1 + +#define EPRINTK(args...) + +#endif //ICP_OCF_PRINT_KERN_ERRS == 1 + +#define IPRINTK(args...) \ +{ \ + ICP_IPRINTK(args); \ +} + +/*DSA Prime Q size in bytes (as defined in the standard) */ +#define DSA_RS_SIGN_PRIMEQ_SIZE_IN_BYTES (20) + +#define BITS_TO_BYTES(bytes, bits) \ + bytes = (bits + NUM_BITS_IN_BYTE_MINUS_ONE) / NUM_BITS_IN_BYTE + +typedef enum { + ICP_OCF_DRV_ALG_CIPHER = 0, + ICP_OCF_DRV_ALG_HASH +} icp_ocf_drv_alg_type_t; + +typedef ICP_LIST_HEAD(icp_drvSessionListHead_s, + icp_drvSessionData) icp_drvSessionListHead_t; + +/*Values used to derisk chances of performs being called against +deregistered sessions (for which the slab page has been reclaimed) +This is not a fix - since page frames are reclaimed from a slab, one cannot +rely on that memory not being re-used by another app.*/ +typedef enum { + ICP_SESSION_INITIALISED = 0x5C5C5C, + ICP_SESSION_RUNNING = 0x005C00, + ICP_SESSION_DEREGISTERED = 0xC5C5C5 +} usage_derisk; + +/* This struct is required for deferred session + deregistration as a work queue function can + only have one argument*/ +struct icp_ocfDrvFreeLacSession { + CpaCySymSessionCtx sessionToDeregister; + icp_workstruct work; +}; + +/* +This is the OCF<->OCF_DRV session object: + +1.listNode + The first member is a listNode. These session objects are added to a linked + list in order to make it easier to remove them all at session exit time. + +2.inUse + The second member is used to give the session object state and derisk the + possibility of OCF batch calls executing against a deregistered session (as + described above). + +3.sessHandle + The third member is a LAC<->OCF_DRV session handle (initialised with the first + perform request for that session). + +4.lacSessCtx + The fourth is the LAC session context. All the parameters for this structure + are only known when the first perform request for this session occurs. That is + why the OCF EP80579 Driver only registers a new LAC session at perform time +*/ +struct icp_drvSessionData { + ICP_LIST_ENTRY(icp_drvSessionData) listNode; + usage_derisk inUse; + CpaCySymSessionCtx sessHandle; + CpaCySymSessionSetupData lacSessCtx; +}; + +/* These are all defined in icp_common.c */ +extern icp_atomic_t lac_session_failed_dereg_count; +extern icp_atomic_t icp_ocfDrvIsExiting; +extern icp_atomic_t num_ocf_to_drv_registered_sessions; + +extern int32_t icp_ocfDrvDriverId; + +extern icp_drvSessionListHead_t icp_ocfDrvGlobalSymListHead; +extern icp_drvSessionListHead_t icp_ocfDrvGlobalSymListHead_FreeMemList; +extern icp_workqueue *icp_ocfDrvFreeLacSessionWorkQ; +extern icp_spinlock_t icp_ocfDrvSymSessInfoListSpinlock; + +/*Slab zones for symettric functionality, instantiated in icp_common.c*/ +extern icp_kmem_cache drvSessionData_zone; +extern icp_kmem_cache drvOpData_zone; + +/*Slabs zones for asymettric functionality, instantiated in icp_common.c*/ +extern icp_kmem_cache drvDH_zone; +extern icp_kmem_cache drvLnModExp_zone; +extern icp_kmem_cache drvRSADecrypt_zone; +extern icp_kmem_cache drvRSAPrivateKey_zone; +extern icp_kmem_cache drvDSARSSign_zone; +extern icp_kmem_cache drvDSARSSignKValue_zone; +extern icp_kmem_cache drvDSAVerify_zone; + +/* Module parameters defined in icp_cpmmon.c*/ + +/* Module parameters - gives the number of times LAC deregistration shall be + re-tried */ +extern int num_dereg_retries; + +/* Module parameter - gives the delay time in jiffies before a LAC session + shall be attempted to be deregistered again */ +extern int dereg_retry_delay_in_jiffies; + +/* Module parameter - gives the maximum number of sessions possible between + OCF and the OCF EP80579 Driver. If set to zero, there is no limit.*/ +extern int max_sessions; + +/*Slab zones for flatbuffers and bufferlist*/ +extern icp_kmem_cache drvFlatBuffer_zone; + +#define ICP_OCF_DRV_DEFAULT_BUFFLIST_ARRAYS (16) + +struct icp_drvBuffListInfo { + Cpa16U numBuffers; + Cpa32U metaSize; + Cpa32U metaOffset; + Cpa32U buffListSize; +}; + +extern struct icp_drvBuffListInfo defBuffListInfo; + +/* This struct is used to keep a reference to the relevant node in the list + of sessionData structs, to the buffer type required by OCF and to the OCF + provided crp struct that needs to be returned. All this info is needed in + the callback function.*/ +struct icp_drvOpData { + CpaCySymOpData lacOpData; + uint32_t digestSizeInBytes; + struct cryptop *crp; + uint8_t bufferType; + uint8_t ivData[MAX_IV_LEN_IN_BYTES]; + uint16_t numBufferListArray; + CpaBufferList srcBuffer; + CpaFlatBuffer bufferListArray[ICP_OCF_DRV_DEFAULT_BUFFLIST_ARRAYS]; + CpaBoolean verifyResult; +}; + +/* Create a new session between OCF and this driver*/ +int icp_ocfDrvNewSession(icp_device_t dev, uint32_t * sild, + struct cryptoini *cri); + +/* Free a session between this driver and the Quick Assist Framework*/ +int icp_ocfDrvFreeLACSession(icp_device_t dev, uint64_t sid); + +/* Defer freeing a Quick Assist session*/ +void icp_ocfDrvDeferedFreeLacSessionProcess(void *arg); + +/* Process OCF cryptographic request for a symmetric algorithm*/ +int icp_ocfDrvSymProcess(icp_device_t dev, struct cryptop *crp, int hint); + +/* Process OCF cryptographic request for an asymmetric algorithm*/ +int icp_ocfDrvPkeProcess(icp_device_t dev, struct cryptkop *krp, int hint); + +/* Populate a buffer with random data*/ +int icp_ocfDrvReadRandom(void *arg, uint32_t * buf, int maxwords); + +/* Retry Quick Assist session deregistration*/ +int icp_ocfDrvDeregRetry(CpaCySymSessionCtx sessionToDeregister); + +/* Convert an OS scatter gather list to a CPA buffer list*/ +int icp_ocfDrvPacketBuffToBufferList(icp_packet_buffer_t * pPacketBuffer, + CpaBufferList * bufferList); + +/* Convert a CPA buffer list to an OS scatter gather list*/ +int icp_ocfDrvBufferListToPacketBuff(CpaBufferList * bufferList, + icp_packet_buffer_t ** pPacketBuffer); + +/* Get the number of buffers in an OS scatter gather list*/ +uint16_t icp_ocfDrvGetPacketBuffFrags(icp_packet_buffer_t * pPacketBuffer); + +/* Convert a single OS buffer to a CPA Flat Buffer*/ +void icp_ocfDrvSinglePacketBuffToFlatBuffer(icp_packet_buffer_t * pPacketBuffer, + CpaFlatBuffer * pFlatBuffer); + +/* Add pointer and length to a CPA Flat Buffer structure*/ +void icp_ocfDrvPtrAndLenToFlatBuffer(void *pData, uint32_t len, + CpaFlatBuffer * pFlatBuffer); + +/* Convert pointer and length values to a CPA buffer list*/ +void icp_ocfDrvPtrAndLenToBufferList(void *pDataIn, uint32_t length, + CpaBufferList * pBufferList); + +/* Convert a CPA buffer list to pointer and length values*/ +void icp_ocfDrvBufferListToPtrAndLen(CpaBufferList * pBufferList, + void **ppDataOut, uint32_t * pLength); + +/* Set the number of flat buffers in bufferlist and the size of memory + to allocate for the pPrivateMetaData member of the CpaBufferList.*/ +int icp_ocfDrvBufferListMemInfo(uint16_t numBuffers, + struct icp_drvBuffListInfo *buffListInfo); + +/* Find pointer position of the digest within an OS scatter gather list*/ +uint8_t *icp_ocfDrvPacketBufferDigestPointerFind(struct icp_drvOpData + *drvOpData, + int offsetInBytes, + uint32_t digestSizeInBytes); + +/*This top level function is used to find a pointer to where a digest is + stored/needs to be inserted. */ +uint8_t *icp_ocfDrvDigestPointerFind(struct icp_drvOpData *drvOpData, + struct cryptodesc *crp_desc); + +/* Free a CPA flat buffer*/ +void icp_ocfDrvFreeFlatBuffer(CpaFlatBuffer * pFlatBuffer); + +/* This function will allocate memory for the pPrivateMetaData + member of CpaBufferList. */ +int icp_ocfDrvAllocMetaData(CpaBufferList * pBufferList, + struct icp_drvOpData *pOpData); + +/* Free data allocated for the pPrivateMetaData + member of CpaBufferList.*/ +void icp_ocfDrvFreeMetaData(CpaBufferList * pBufferList); + +#define ICP_CACHE_CREATE(cache_ID, cache_name) \ + icp_kmem_cache_create(cache_ID, sizeof(cache_name),ICP_KERNEL_CACHE_ALIGN,\ + ICP_KERNEL_CACHE_NOINIT) + +#define ICP_CACHE_FREE(args...) \ + icp_kmem_cache_free (args) + +#define ICP_CACHE_DESTROY(slab_zone)\ +{\ + if(NULL != slab_zone){\ + icp_kmem_cache_destroy(slab_zone);\ + slab_zone = NULL;\ + }\ +} + +#endif +/* ICP_OCF_H_ */ diff --git a/target/linux/generic-2.4/files/crypto/ocf/ep80579/icp_sym.c b/target/linux/generic-2.4/files/crypto/ocf/ep80579/icp_sym.c new file mode 100644 index 0000000000..e1c71484a6 --- /dev/null +++ b/target/linux/generic-2.4/files/crypto/ocf/ep80579/icp_sym.c @@ -0,0 +1,1153 @@ +/*************************************************************************** + * + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2007,2008,2009 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + * The full GNU General Public License is included in this distribution + * in the file called LICENSE.GPL. + * + * Contact Information: + * Intel Corporation + * + * BSD LICENSE + * + * Copyright(c) 2007,2008,2009 Intel Corporation. All rights reserved. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * + * version: Security.L.1.0.2-229 + * + ***************************************************************************/ +/* + * An OCF module that uses the API for Intel® QuickAssist Technology to do the + * cryptography. + * + * This driver requires the ICP Access Library that is available from Intel in + * order to operate. + */ + +#include "icp_ocf.h" + +/*This is the call back function for all symmetric cryptographic processes. + Its main functionality is to free driver crypto operation structure and to + call back to OCF*/ +static void +icp_ocfDrvSymCallBack(void *callbackTag, + CpaStatus status, + const CpaCySymOp operationType, + void *pOpData, + CpaBufferList * pDstBuffer, CpaBoolean verifyResult); + +/*This function is used to extract crypto processing information from the OCF + inputs, so as that it may be passed onto LAC*/ +static int +icp_ocfDrvProcessDataSetup(struct icp_drvOpData *drvOpData, + struct cryptodesc *crp_desc); + +/*This function checks whether the crp_desc argument pertains to a digest or a + cipher operation*/ +static int icp_ocfDrvAlgCheck(struct cryptodesc *crp_desc); + +/*This function copies all the passed in session context information and stores + it in a LAC context structure*/ +static int +icp_ocfDrvAlgorithmSetup(struct cryptoini *cri, + CpaCySymSessionSetupData * lacSessCtx); + +/*This function is used to free an OCF->OCF_DRV session object*/ +static void icp_ocfDrvFreeOCFSession(struct icp_drvSessionData *sessionData); + +/*max IOV buffs supported in a UIO structure*/ +#define NUM_IOV_SUPPORTED (1) + +/* Name : icp_ocfDrvSymCallBack + * + * Description : When this function returns it signifies that the LAC + * component has completed the relevant symmetric operation. + * + * Notes : The callbackTag is a pointer to an icp_drvOpData. This memory + * object was passed to LAC for the cryptographic processing and contains all + * the relevant information for cleaning up buffer handles etc. so that the + * OCF EP80579 Driver portion of this crypto operation can be fully completed. + */ +static void +icp_ocfDrvSymCallBack(void *callbackTag, + CpaStatus status, + const CpaCySymOp operationType, + void *pOpData, + CpaBufferList * pDstBuffer, CpaBoolean verifyResult) +{ + struct cryptop *crp = NULL; + struct icp_drvOpData *temp_drvOpData = + (struct icp_drvOpData *)callbackTag; + uint64_t *tempBasePtr = NULL; + uint32_t tempLen = 0; + + if (NULL == temp_drvOpData) { + DPRINTK("%s(): The callback from the LAC component" + " has failed due to Null userOpaque data" + "(status == %d).\n", __FUNCTION__, status); + DPRINTK("%s(): Unable to call OCF back! \n", __FUNCTION__); + return; + } + + crp = temp_drvOpData->crp; + crp->crp_etype = ICP_OCF_DRV_NO_CRYPTO_PROCESS_ERROR; + + if (NULL == pOpData) { + DPRINTK("%s(): The callback from the LAC component" + " has failed due to Null Symmetric Op data" + "(status == %d).\n", __FUNCTION__, status); + crp->crp_etype = ECANCELED; + crypto_done(crp); + return; + } + + if (NULL == pDstBuffer) { + DPRINTK("%s(): The callback from the LAC component" + " has failed due to Null Dst Bufferlist data" + "(status == %d).\n", __FUNCTION__, status); + crp->crp_etype = ECANCELED; + crypto_done(crp); + return; + } + + if (CPA_STATUS_SUCCESS == status) { + + if (temp_drvOpData->bufferType == ICP_CRYPTO_F_PACKET_BUF) { + if (ICP_OCF_DRV_STATUS_SUCCESS != + icp_ocfDrvBufferListToPacketBuff(pDstBuffer, + (icp_packet_buffer_t + **) + & (crp->crp_buf))) { + EPRINTK("%s(): BufferList to SkBuff " + "conversion error.\n", __FUNCTION__); + crp->crp_etype = EPERM; + } + } else { + icp_ocfDrvBufferListToPtrAndLen(pDstBuffer, + (void **)&tempBasePtr, + &tempLen); + crp->crp_olen = (int)tempLen; + } + + } else { + DPRINTK("%s(): The callback from the LAC component has failed" + "(status == %d).\n", __FUNCTION__, status); + + crp->crp_etype = ECANCELED; + } + + if (temp_drvOpData->numBufferListArray > + ICP_OCF_DRV_DEFAULT_BUFFLIST_ARRAYS) { + icp_kfree(pDstBuffer->pBuffers); + } + icp_ocfDrvFreeMetaData(pDstBuffer); + ICP_CACHE_FREE(drvOpData_zone, temp_drvOpData); + + /* Invoke the OCF callback function */ + crypto_done(crp); + + return; +} + +/* Name : icp_ocfDrvNewSession + * + * Description : This function will create a new Driver<->OCF session + * + * Notes : LAC session registration happens during the first perform call. + * That is the first time we know all information about a given session. + */ +int icp_ocfDrvNewSession(icp_device_t dev, uint32_t * sid, + struct cryptoini *cri) +{ + struct icp_drvSessionData *sessionData = NULL; + uint32_t delete_session = 0; + + /* The SID passed in should be our driver ID. We can return the */ + /* local ID (LID) which is a unique identifier which we can use */ + /* to differentiate between the encrypt/decrypt LAC session handles */ + if (NULL == sid) { + EPRINTK("%s(): Invalid input parameters - NULL sid.\n", + __FUNCTION__); + return EINVAL; + } + + if (NULL == cri) { + EPRINTK("%s(): Invalid input parameters - NULL cryptoini.\n", + __FUNCTION__); + return EINVAL; + } + + if (icp_ocfDrvDriverId != *sid) { + EPRINTK("%s(): Invalid input parameters - bad driver ID\n", + __FUNCTION__); + EPRINTK("\t sid = 0x08%p \n \t cri = 0x08%p \n", sid, cri); + return EINVAL; + } + + sessionData = icp_kmem_cache_zalloc(drvSessionData_zone, ICP_M_NOWAIT); + if (NULL == sessionData) { + DPRINTK("%s():No memory for Session Data\n", __FUNCTION__); + return ENOMEM; + } + + /*ENTER CRITICAL SECTION */ + icp_spin_lockbh_lock(&icp_ocfDrvSymSessInfoListSpinlock); + /*put this check in the spinlock so no new sessions can be added to the + linked list when we are exiting */ + if (CPA_TRUE == icp_atomic_read(&icp_ocfDrvIsExiting)) { + delete_session++; + + } else if (NO_OCF_TO_DRV_MAX_SESSIONS != max_sessions) { + if (icp_atomic_read(&num_ocf_to_drv_registered_sessions) >= + (max_sessions - + icp_atomic_read(&lac_session_failed_dereg_count))) { + delete_session++; + } else { + icp_atomic_inc(&num_ocf_to_drv_registered_sessions); + /* Add to session data linked list */ + ICP_LIST_ADD(sessionData, &icp_ocfDrvGlobalSymListHead, + listNode); + } + + } else if (NO_OCF_TO_DRV_MAX_SESSIONS == max_sessions) { + ICP_LIST_ADD(sessionData, &icp_ocfDrvGlobalSymListHead, + listNode); + } + + sessionData->inUse = ICP_SESSION_INITIALISED; + + /*EXIT CRITICAL SECTION */ + icp_spin_lockbh_unlock(&icp_ocfDrvSymSessInfoListSpinlock); + + if (delete_session) { + DPRINTK("%s():No Session handles available\n", __FUNCTION__); + ICP_CACHE_FREE(drvSessionData_zone, sessionData); + return EPERM; + } + + if (ICP_OCF_DRV_STATUS_SUCCESS != + icp_ocfDrvAlgorithmSetup(cri, &(sessionData->lacSessCtx))) { + DPRINTK("%s():algorithm not supported\n", __FUNCTION__); + icp_ocfDrvFreeOCFSession(sessionData); + return EINVAL; + } + + if (cri->cri_next) { + if (cri->cri_next->cri_next != NULL) { + DPRINTK("%s():only two chained algorithms supported\n", + __FUNCTION__); + icp_ocfDrvFreeOCFSession(sessionData); + return EPERM; + } + + if (ICP_OCF_DRV_STATUS_SUCCESS != + icp_ocfDrvAlgorithmSetup(cri->cri_next, + &(sessionData->lacSessCtx))) { + DPRINTK("%s():second algorithm not supported\n", + __FUNCTION__); + icp_ocfDrvFreeOCFSession(sessionData); + return EINVAL; + } + + sessionData->lacSessCtx.symOperation = + CPA_CY_SYM_OP_ALGORITHM_CHAINING; + } + + *sid = (uint32_t) sessionData; + + return ICP_OCF_DRV_STATUS_SUCCESS; +} + +/* Name : icp_ocfDrvAlgorithmSetup + * + * Description : This function builds the session context data from the + * information supplied through OCF. Algorithm chain order and whether the + * session is Encrypt/Decrypt can only be found out at perform time however, so + * the session is registered with LAC at that time. + */ +static int +icp_ocfDrvAlgorithmSetup(struct cryptoini *cri, + CpaCySymSessionSetupData * lacSessCtx) +{ + + lacSessCtx->sessionPriority = CPA_CY_PRIORITY_NORMAL; + + switch (cri->cri_alg) { + + case CRYPTO_NULL_CBC: + DPRINTK("%s(): NULL CBC\n", __FUNCTION__); + lacSessCtx->symOperation = CPA_CY_SYM_OP_CIPHER; + lacSessCtx->cipherSetupData.cipherAlgorithm = + CPA_CY_SYM_CIPHER_NULL; + lacSessCtx->cipherSetupData.cipherKeyLenInBytes = + cri->cri_klen / NUM_BITS_IN_BYTE; + lacSessCtx->cipherSetupData.pCipherKey = cri->cri_key; + break; + + case CRYPTO_DES_CBC: + DPRINTK("%s(): DES CBC\n", __FUNCTION__); + lacSessCtx->symOperation = CPA_CY_SYM_OP_CIPHER; + lacSessCtx->cipherSetupData.cipherAlgorithm = + CPA_CY_SYM_CIPHER_DES_CBC; + lacSessCtx->cipherSetupData.cipherKeyLenInBytes = + cri->cri_klen / NUM_BITS_IN_BYTE; + lacSessCtx->cipherSetupData.pCipherKey = cri->cri_key; + break; + + case CRYPTO_3DES_CBC: + DPRINTK("%s(): 3DES CBC\n", __FUNCTION__); + lacSessCtx->symOperation = CPA_CY_SYM_OP_CIPHER; + lacSessCtx->cipherSetupData.cipherAlgorithm = + CPA_CY_SYM_CIPHER_3DES_CBC; + lacSessCtx->cipherSetupData.cipherKeyLenInBytes = + cri->cri_klen / NUM_BITS_IN_BYTE; + lacSessCtx->cipherSetupData.pCipherKey = cri->cri_key; + break; + + case CRYPTO_AES_CBC: + DPRINTK("%s(): AES CBC\n", __FUNCTION__); + lacSessCtx->symOperation = CPA_CY_SYM_OP_CIPHER; + lacSessCtx->cipherSetupData.cipherAlgorithm = + CPA_CY_SYM_CIPHER_AES_CBC; + lacSessCtx->cipherSetupData.cipherKeyLenInBytes = + cri->cri_klen / NUM_BITS_IN_BYTE; + lacSessCtx->cipherSetupData.pCipherKey = cri->cri_key; + break; + + case CRYPTO_ARC4: + DPRINTK("%s(): ARC4\n", __FUNCTION__); + lacSessCtx->symOperation = CPA_CY_SYM_OP_CIPHER; + lacSessCtx->cipherSetupData.cipherAlgorithm = + CPA_CY_SYM_CIPHER_ARC4; + lacSessCtx->cipherSetupData.cipherKeyLenInBytes = + cri->cri_klen / NUM_BITS_IN_BYTE; + lacSessCtx->cipherSetupData.pCipherKey = cri->cri_key; + break; + + case CRYPTO_SHA1: + DPRINTK("%s(): SHA1\n", __FUNCTION__); + lacSessCtx->symOperation = CPA_CY_SYM_OP_HASH; + lacSessCtx->hashSetupData.hashAlgorithm = CPA_CY_SYM_HASH_SHA1; + lacSessCtx->hashSetupData.hashMode = CPA_CY_SYM_HASH_MODE_PLAIN; + lacSessCtx->hashSetupData.digestResultLenInBytes = + (cri->cri_mlen ? + cri->cri_mlen : ICP_SHA1_DIGEST_SIZE_IN_BYTES); + + break; + + case CRYPTO_SHA1_HMAC: + DPRINTK("%s(): SHA1_HMAC\n", __FUNCTION__); + lacSessCtx->symOperation = CPA_CY_SYM_OP_HASH; + lacSessCtx->hashSetupData.hashAlgorithm = CPA_CY_SYM_HASH_SHA1; + lacSessCtx->hashSetupData.hashMode = CPA_CY_SYM_HASH_MODE_AUTH; + lacSessCtx->hashSetupData.digestResultLenInBytes = + (cri->cri_mlen ? + cri->cri_mlen : ICP_SHA1_DIGEST_SIZE_IN_BYTES); + lacSessCtx->hashSetupData.authModeSetupData.authKey = + cri->cri_key; + lacSessCtx->hashSetupData.authModeSetupData.authKeyLenInBytes = + cri->cri_klen / NUM_BITS_IN_BYTE; + lacSessCtx->hashSetupData.authModeSetupData.aadLenInBytes = 0; + + break; + + case CRYPTO_SHA2_256: + DPRINTK("%s(): SHA256\n", __FUNCTION__); + lacSessCtx->symOperation = CPA_CY_SYM_OP_HASH; + lacSessCtx->hashSetupData.hashAlgorithm = + CPA_CY_SYM_HASH_SHA256; + lacSessCtx->hashSetupData.hashMode = CPA_CY_SYM_HASH_MODE_PLAIN; + lacSessCtx->hashSetupData.digestResultLenInBytes = + (cri->cri_mlen ? + cri->cri_mlen : ICP_SHA256_DIGEST_SIZE_IN_BYTES); + + break; + + case CRYPTO_SHA2_256_HMAC: + DPRINTK("%s(): SHA256_HMAC\n", __FUNCTION__); + lacSessCtx->symOperation = CPA_CY_SYM_OP_HASH; + lacSessCtx->hashSetupData.hashAlgorithm = + CPA_CY_SYM_HASH_SHA256; + lacSessCtx->hashSetupData.hashMode = CPA_CY_SYM_HASH_MODE_AUTH; + lacSessCtx->hashSetupData.digestResultLenInBytes = + (cri->cri_mlen ? + cri->cri_mlen : ICP_SHA256_DIGEST_SIZE_IN_BYTES); + lacSessCtx->hashSetupData.authModeSetupData.authKey = + cri->cri_key; + lacSessCtx->hashSetupData.authModeSetupData.authKeyLenInBytes = + cri->cri_klen / NUM_BITS_IN_BYTE; + lacSessCtx->hashSetupData.authModeSetupData.aadLenInBytes = 0; + + break; + + case CRYPTO_SHA2_384: + DPRINTK("%s(): SHA384\n", __FUNCTION__); + lacSessCtx->symOperation = CPA_CY_SYM_OP_HASH; + lacSessCtx->hashSetupData.hashAlgorithm = + CPA_CY_SYM_HASH_SHA384; + lacSessCtx->hashSetupData.hashMode = CPA_CY_SYM_HASH_MODE_PLAIN; + lacSessCtx->hashSetupData.digestResultLenInBytes = + (cri->cri_mlen ? + cri->cri_mlen : ICP_SHA384_DIGEST_SIZE_IN_BYTES); + + break; + + case CRYPTO_SHA2_384_HMAC: + DPRINTK("%s(): SHA384_HMAC\n", __FUNCTION__); + lacSessCtx->symOperation = CPA_CY_SYM_OP_HASH; + lacSessCtx->hashSetupData.hashAlgorithm = + CPA_CY_SYM_HASH_SHA384; + lacSessCtx->hashSetupData.hashMode = CPA_CY_SYM_HASH_MODE_AUTH; + lacSessCtx->hashSetupData.digestResultLenInBytes = + (cri->cri_mlen ? + cri->cri_mlen : ICP_SHA384_DIGEST_SIZE_IN_BYTES); + lacSessCtx->hashSetupData.authModeSetupData.authKey = + cri->cri_key; + lacSessCtx->hashSetupData.authModeSetupData.authKeyLenInBytes = + cri->cri_klen / NUM_BITS_IN_BYTE; + lacSessCtx->hashSetupData.authModeSetupData.aadLenInBytes = 0; + + break; + + case CRYPTO_SHA2_512: + DPRINTK("%s(): SHA512\n", __FUNCTION__); + lacSessCtx->symOperation = CPA_CY_SYM_OP_HASH; + lacSessCtx->hashSetupData.hashAlgorithm = + CPA_CY_SYM_HASH_SHA512; + lacSessCtx->hashSetupData.hashMode = CPA_CY_SYM_HASH_MODE_PLAIN; + lacSessCtx->hashSetupData.digestResultLenInBytes = + (cri->cri_mlen ? + cri->cri_mlen : ICP_SHA512_DIGEST_SIZE_IN_BYTES); + + break; + + case CRYPTO_SHA2_512_HMAC: + DPRINTK("%s(): SHA512_HMAC\n", __FUNCTION__); + lacSessCtx->symOperation = CPA_CY_SYM_OP_HASH; + lacSessCtx->hashSetupData.hashAlgorithm = + CPA_CY_SYM_HASH_SHA512; + lacSessCtx->hashSetupData.hashMode = CPA_CY_SYM_HASH_MODE_AUTH; + lacSessCtx->hashSetupData.digestResultLenInBytes = + (cri->cri_mlen ? + cri->cri_mlen : ICP_SHA512_DIGEST_SIZE_IN_BYTES); + lacSessCtx->hashSetupData.authModeSetupData.authKey = + cri->cri_key; + lacSessCtx->hashSetupData.authModeSetupData.authKeyLenInBytes = + cri->cri_klen / NUM_BITS_IN_BYTE; + lacSessCtx->hashSetupData.authModeSetupData.aadLenInBytes = 0; + + break; + + case CRYPTO_MD5: + DPRINTK("%s(): MD5\n", __FUNCTION__); + lacSessCtx->symOperation = CPA_CY_SYM_OP_HASH; + lacSessCtx->hashSetupData.hashAlgorithm = CPA_CY_SYM_HASH_MD5; + lacSessCtx->hashSetupData.hashMode = CPA_CY_SYM_HASH_MODE_PLAIN; + lacSessCtx->hashSetupData.digestResultLenInBytes = + (cri->cri_mlen ? + cri->cri_mlen : ICP_MD5_DIGEST_SIZE_IN_BYTES); + + break; + + case CRYPTO_MD5_HMAC: + DPRINTK("%s(): MD5_HMAC\n", __FUNCTION__); + lacSessCtx->symOperation = CPA_CY_SYM_OP_HASH; + lacSessCtx->hashSetupData.hashAlgorithm = CPA_CY_SYM_HASH_MD5; + lacSessCtx->hashSetupData.hashMode = CPA_CY_SYM_HASH_MODE_AUTH; + lacSessCtx->hashSetupData.digestResultLenInBytes = + (cri->cri_mlen ? + cri->cri_mlen : ICP_MD5_DIGEST_SIZE_IN_BYTES); + lacSessCtx->hashSetupData.authModeSetupData.authKey = + cri->cri_key; + lacSessCtx->hashSetupData.authModeSetupData.authKeyLenInBytes = + cri->cri_klen / NUM_BITS_IN_BYTE; + lacSessCtx->hashSetupData.authModeSetupData.aadLenInBytes = 0; + + break; + + default: + DPRINTK("%s(): ALG Setup FAIL\n", __FUNCTION__); + return ICP_OCF_DRV_STATUS_FAIL; + } + + return ICP_OCF_DRV_STATUS_SUCCESS; +} + +/* Name : icp_ocfDrvFreeOCFSession + * + * Description : This function deletes all existing Session data representing + * the Cryptographic session established between OCF and this driver. This + * also includes freeing the memory allocated for the session context. The + * session object is also removed from the session linked list. + */ +static void icp_ocfDrvFreeOCFSession(struct icp_drvSessionData *sessionData) +{ + + sessionData->inUse = ICP_SESSION_DEREGISTERED; + + /*ENTER CRITICAL SECTION */ + icp_spin_lockbh_lock(&icp_ocfDrvSymSessInfoListSpinlock); + + if (CPA_TRUE == icp_atomic_read(&icp_ocfDrvIsExiting)) { + /*If the Driver is exiting, allow that process to + handle any deletions */ + /*EXIT CRITICAL SECTION */ + icp_spin_lockbh_unlock(&icp_ocfDrvSymSessInfoListSpinlock); + return; + } + + icp_atomic_dec(&num_ocf_to_drv_registered_sessions); + + ICP_LIST_DEL(sessionData, listNode); + + /*EXIT CRITICAL SECTION */ + icp_spin_lockbh_unlock(&icp_ocfDrvSymSessInfoListSpinlock); + + if (NULL != sessionData->sessHandle) { + icp_kfree(sessionData->sessHandle); + } + ICP_CACHE_FREE(drvSessionData_zone, sessionData); +} + +/* Name : icp_ocfDrvFreeLACSession + * + * Description : This attempts to deregister a LAC session. If it fails, the + * deregistation retry function is called. + */ +int icp_ocfDrvFreeLACSession(icp_device_t dev, uint64_t sid) +{ + CpaCySymSessionCtx sessionToDeregister = NULL; + struct icp_drvSessionData *sessionData = NULL; + CpaStatus lacStatus = CPA_STATUS_SUCCESS; + int retval = 0; + + sessionData = (struct icp_drvSessionData *)CRYPTO_SESID2LID(sid); + if (NULL == sessionData) { + EPRINTK("%s(): OCF Free session called with Null Session ID.\n", + __FUNCTION__); + return EINVAL; + } + + sessionToDeregister = sessionData->sessHandle; + + if ((ICP_SESSION_INITIALISED != sessionData->inUse) && + (ICP_SESSION_RUNNING != sessionData->inUse) && + (ICP_SESSION_DEREGISTERED != sessionData->inUse)) { + DPRINTK("%s() Session not initialised.\n", __FUNCTION__); + return EINVAL; + } + + if (ICP_SESSION_RUNNING == sessionData->inUse) { + lacStatus = cpaCySymRemoveSession(CPA_INSTANCE_HANDLE_SINGLE, + sessionToDeregister); + if (CPA_STATUS_RETRY == lacStatus) { + if (ICP_OCF_DRV_STATUS_SUCCESS != + icp_ocfDrvDeregRetry(&sessionToDeregister)) { + /* the retry function increments the + dereg failed count */ + DPRINTK("%s(): LAC failed to deregister the " + "session. (localSessionId= %p)\n", + __FUNCTION__, sessionToDeregister); + retval = EPERM; + } + + } else if (CPA_STATUS_SUCCESS != lacStatus) { + DPRINTK("%s(): LAC failed to deregister the session. " + "localSessionId= %p, lacStatus = %d\n", + __FUNCTION__, sessionToDeregister, lacStatus); + icp_atomic_inc(&lac_session_failed_dereg_count); + retval = EPERM; + } + } else { + DPRINTK("%s() Session not registered with LAC.\n", + __FUNCTION__); + } + + icp_ocfDrvFreeOCFSession(sessionData); + return retval; + +} + +/* Name : icp_ocfDrvAlgCheck + * + * Description : This function checks whether the cryptodesc argument pertains + * to a sym or hash function + */ +static int icp_ocfDrvAlgCheck(struct cryptodesc *crp_desc) +{ + + if (crp_desc->crd_alg == CRYPTO_3DES_CBC || + crp_desc->crd_alg == CRYPTO_AES_CBC || + crp_desc->crd_alg == CRYPTO_DES_CBC || + crp_desc->crd_alg == CRYPTO_NULL_CBC || + crp_desc->crd_alg == CRYPTO_ARC4) { + return ICP_OCF_DRV_ALG_CIPHER; + } + + return ICP_OCF_DRV_ALG_HASH; +} + +/* Name : icp_ocfDrvSymProcess + * + * Description : This function will map symmetric functionality calls from OCF + * to the LAC API. It will also allocate memory to store the session context. + * + * Notes: If it is the first perform call for a given session, then a LAC + * session is registered. After the session is registered, no checks as + * to whether session paramaters have changed (e.g. alg chain order) are + * done. + */ +int icp_ocfDrvSymProcess(icp_device_t dev, struct cryptop *crp, int hint) +{ + struct icp_drvSessionData *sessionData = NULL; + struct icp_drvOpData *drvOpData = NULL; + CpaStatus lacStatus = CPA_STATUS_SUCCESS; + Cpa32U sessionCtxSizeInBytes = 0; + + if (NULL == crp) { + DPRINTK("%s(): Invalid input parameters, cryptop is NULL\n", + __FUNCTION__); + return EINVAL; + } + + if (NULL == crp->crp_desc) { + DPRINTK("%s(): Invalid input parameters, no crp_desc attached " + "to crp\n", __FUNCTION__); + crp->crp_etype = EINVAL; + return EINVAL; + } + + if (NULL == crp->crp_buf) { + DPRINTK("%s(): Invalid input parameters, no buffer attached " + "to crp\n", __FUNCTION__); + crp->crp_etype = EINVAL; + return EINVAL; + } + + if (CPA_TRUE == icp_atomic_read(&icp_ocfDrvIsExiting)) { + crp->crp_etype = EFAULT; + return EFAULT; + } + + sessionData = (struct icp_drvSessionData *) + (CRYPTO_SESID2LID(crp->crp_sid)); + if (NULL == sessionData) { + DPRINTK("%s(): Invalid input parameters, Null Session ID \n", + __FUNCTION__); + crp->crp_etype = EINVAL; + return EINVAL; + } + +/*If we get a request against a deregisted session, cancel operation*/ + if (ICP_SESSION_DEREGISTERED == sessionData->inUse) { + DPRINTK("%s(): Session ID %d was deregistered \n", + __FUNCTION__, (int)(CRYPTO_SESID2LID(crp->crp_sid))); + crp->crp_etype = EFAULT; + return EFAULT; + } + +/*If none of the session states are set, then the session structure was either + not initialised properly or we are reading from a freed memory area (possible + due to OCF batch mode not removing queued requests against deregistered + sessions*/ + if (ICP_SESSION_INITIALISED != sessionData->inUse && + ICP_SESSION_RUNNING != sessionData->inUse) { + DPRINTK("%s(): Session - ID %d - not properly initialised or " + "memory freed back to the kernel \n", + __FUNCTION__, (int)(CRYPTO_SESID2LID(crp->crp_sid))); + crp->crp_etype = EINVAL; + return EINVAL; + } + + /*For the below checks, remember error checking is already done in LAC. + We're not validating inputs subsequent to registration */ + if (sessionData->inUse == ICP_SESSION_INITIALISED) { + DPRINTK("%s(): Initialising session\n", __FUNCTION__); + + if (NULL != crp->crp_desc->crd_next) { + if (ICP_OCF_DRV_ALG_CIPHER == + icp_ocfDrvAlgCheck(crp->crp_desc)) { + + sessionData->lacSessCtx.algChainOrder = + CPA_CY_SYM_ALG_CHAIN_ORDER_CIPHER_THEN_HASH; + + if (crp->crp_desc->crd_flags & CRD_F_ENCRYPT) { + sessionData->lacSessCtx.cipherSetupData. + cipherDirection = + CPA_CY_SYM_CIPHER_DIRECTION_ENCRYPT; + } else { + sessionData->lacSessCtx.cipherSetupData. + cipherDirection = + CPA_CY_SYM_CIPHER_DIRECTION_DECRYPT; + } + } else { + sessionData->lacSessCtx.algChainOrder = + CPA_CY_SYM_ALG_CHAIN_ORDER_HASH_THEN_CIPHER; + + if (crp->crp_desc->crd_next->crd_flags & + CRD_F_ENCRYPT) { + sessionData->lacSessCtx.cipherSetupData. + cipherDirection = + CPA_CY_SYM_CIPHER_DIRECTION_ENCRYPT; + } else { + sessionData->lacSessCtx.cipherSetupData. + cipherDirection = + CPA_CY_SYM_CIPHER_DIRECTION_DECRYPT; + } + + } + + } else if (ICP_OCF_DRV_ALG_CIPHER == + icp_ocfDrvAlgCheck(crp->crp_desc)) { + if (crp->crp_desc->crd_flags & CRD_F_ENCRYPT) { + sessionData->lacSessCtx.cipherSetupData. + cipherDirection = + CPA_CY_SYM_CIPHER_DIRECTION_ENCRYPT; + } else { + sessionData->lacSessCtx.cipherSetupData. + cipherDirection = + CPA_CY_SYM_CIPHER_DIRECTION_DECRYPT; + } + + } + + /*No action required for standalone Auth here */ + + /* Allocate memory for SymSessionCtx before the Session Registration */ + lacStatus = + cpaCySymSessionCtxGetSize(CPA_INSTANCE_HANDLE_SINGLE, + &(sessionData->lacSessCtx), + &sessionCtxSizeInBytes); + if (CPA_STATUS_SUCCESS != lacStatus) { + EPRINTK("%s(): cpaCySymSessionCtxGetSize failed - %d\n", + __FUNCTION__, lacStatus); + crp->crp_etype = EINVAL; + return EINVAL; + } + sessionData->sessHandle = + icp_kmalloc(sessionCtxSizeInBytes, ICP_M_NOWAIT); + if (NULL == sessionData->sessHandle) { + EPRINTK + ("%s(): Failed to get memory for SymSessionCtx\n", + __FUNCTION__); + crp->crp_etype = ENOMEM; + return ENOMEM; + } + + lacStatus = cpaCySymInitSession(CPA_INSTANCE_HANDLE_SINGLE, + icp_ocfDrvSymCallBack, + &(sessionData->lacSessCtx), + sessionData->sessHandle); + + if (CPA_STATUS_SUCCESS != lacStatus) { + EPRINTK("%s(): cpaCySymInitSession failed -%d \n", + __FUNCTION__, lacStatus); + crp->crp_etype = EFAULT; + return EFAULT; + } + + sessionData->inUse = ICP_SESSION_RUNNING; + } + + drvOpData = icp_kmem_cache_zalloc(drvOpData_zone, ICP_M_NOWAIT); + if (NULL == drvOpData) { + EPRINTK("%s():Failed to get memory for drvOpData\n", + __FUNCTION__); + crp->crp_etype = ENOMEM; + return ENOMEM; + } + + drvOpData->lacOpData.pSessionCtx = sessionData->sessHandle; + drvOpData->digestSizeInBytes = sessionData->lacSessCtx.hashSetupData. + digestResultLenInBytes; + drvOpData->crp = crp; + + /* Set the default buffer list array memory allocation */ + drvOpData->srcBuffer.pBuffers = drvOpData->bufferListArray; + drvOpData->numBufferListArray = ICP_OCF_DRV_DEFAULT_BUFFLIST_ARRAYS; + + if (ICP_OCF_DRV_STATUS_SUCCESS != + icp_ocfDrvProcessDataSetup(drvOpData, drvOpData->crp->crp_desc)) { + crp->crp_etype = EINVAL; + goto err; + } + + if (drvOpData->crp->crp_desc->crd_next != NULL) { + if (icp_ocfDrvProcessDataSetup(drvOpData, drvOpData->crp-> + crp_desc->crd_next)) { + crp->crp_etype = EINVAL; + goto err; + } + + } + + /* + * Allocate buffer list array memory if the data fragment is more than + * the default number (ICP_OCF_DRV_DEFAULT_BUFFLIST_ARRAYS) and not + * calculated already + */ + if (crp->crp_flags & ICP_CRYPTO_F_PACKET_BUF) { + if (NULL == drvOpData->lacOpData.pDigestResult) { + drvOpData->numBufferListArray = + icp_ocfDrvGetPacketBuffFrags((icp_packet_buffer_t *) + crp->crp_buf); + } + + if (ICP_OCF_DRV_DEFAULT_BUFFLIST_ARRAYS < + drvOpData->numBufferListArray) { + DPRINTK("%s() numBufferListArray more than default\n", + __FUNCTION__); + drvOpData->srcBuffer.pBuffers = NULL; + drvOpData->srcBuffer.pBuffers = + icp_kmalloc(drvOpData->numBufferListArray * + sizeof(CpaFlatBuffer), ICP_M_NOWAIT); + if (NULL == drvOpData->srcBuffer.pBuffers) { + EPRINTK("%s() Failed to get memory for " + "pBuffers\n", __FUNCTION__); + ICP_CACHE_FREE(drvOpData_zone, drvOpData); + crp->crp_etype = ENOMEM; + return ENOMEM; + } + } + } + + /* + * Check the type of buffer structure we got and convert it into + * CpaBufferList format. + */ + if (crp->crp_flags & ICP_CRYPTO_F_PACKET_BUF) { + if (ICP_OCF_DRV_STATUS_SUCCESS != + icp_ocfDrvPacketBuffToBufferList((icp_packet_buffer_t *) + crp->crp_buf, + &(drvOpData->srcBuffer))) { + EPRINTK("%s():Failed to translate from packet buffer " + "to bufferlist\n", __FUNCTION__); + crp->crp_etype = EINVAL; + goto err; + } + + drvOpData->bufferType = ICP_CRYPTO_F_PACKET_BUF; + } else if (crp->crp_flags & CRYPTO_F_IOV) { + /* OCF only supports IOV of one entry. */ + if (NUM_IOV_SUPPORTED == + ((struct uio *)(crp->crp_buf))->uio_iovcnt) { + + icp_ocfDrvPtrAndLenToBufferList(((struct uio *)(crp-> + crp_buf))-> + uio_iov[0].iov_base, + ((struct uio *)(crp-> + crp_buf))-> + uio_iov[0].iov_len, + &(drvOpData-> + srcBuffer)); + + drvOpData->bufferType = CRYPTO_F_IOV; + + } else { + DPRINTK("%s():Unable to handle IOVs with lengths of " + "greater than one!\n", __FUNCTION__); + crp->crp_etype = EINVAL; + goto err; + } + + } else { + icp_ocfDrvPtrAndLenToBufferList(crp->crp_buf, + crp->crp_ilen, + &(drvOpData->srcBuffer)); + + drvOpData->bufferType = CRYPTO_BUF_CONTIG; + } + + /* Allocate srcBuffer's private meta data */ + if (ICP_OCF_DRV_STATUS_SUCCESS != + icp_ocfDrvAllocMetaData(&(drvOpData->srcBuffer), drvOpData)) { + EPRINTK("%s() icp_ocfDrvAllocMetaData failed\n", __FUNCTION__); + memset(&(drvOpData->lacOpData), 0, sizeof(CpaCySymOpData)); + crp->crp_etype = EINVAL; + goto err; + } + + /* Perform "in-place" crypto operation */ + lacStatus = cpaCySymPerformOp(CPA_INSTANCE_HANDLE_SINGLE, + (void *)drvOpData, + &(drvOpData->lacOpData), + &(drvOpData->srcBuffer), + &(drvOpData->srcBuffer), + &(drvOpData->verifyResult)); + if (CPA_STATUS_RETRY == lacStatus) { + DPRINTK("%s(): cpaCySymPerformOp retry, lacStatus = %d\n", + __FUNCTION__, lacStatus); + memset(&(drvOpData->lacOpData), 0, sizeof(CpaCySymOpData)); + crp->crp_etype = ERESTART; + goto err; + } + if (CPA_STATUS_SUCCESS != lacStatus) { + EPRINTK("%s(): cpaCySymPerformOp failed, lacStatus = %d\n", + __FUNCTION__, lacStatus); + memset(&(drvOpData->lacOpData), 0, sizeof(CpaCySymOpData)); + crp->crp_etype = EINVAL; + goto err; + } + + return 0; //OCF success status value + + err: + if (drvOpData->numBufferListArray > ICP_OCF_DRV_DEFAULT_BUFFLIST_ARRAYS) { + icp_kfree(drvOpData->srcBuffer.pBuffers); + } + icp_ocfDrvFreeMetaData(&(drvOpData->srcBuffer)); + ICP_CACHE_FREE(drvOpData_zone, drvOpData); + + return crp->crp_etype; +} + +/* Name : icp_ocfDrvProcessDataSetup + * + * Description : This function will setup all the cryptographic operation data + * that is required by LAC to execute the operation. + */ +static int icp_ocfDrvProcessDataSetup(struct icp_drvOpData *drvOpData, + struct cryptodesc *crp_desc) +{ + CpaCyRandGenOpData randGenOpData; + CpaFlatBuffer randData; + + drvOpData->lacOpData.packetType = CPA_CY_SYM_PACKET_TYPE_FULL; + + /* Convert from the cryptop to the ICP LAC crypto parameters */ + switch (crp_desc->crd_alg) { + case CRYPTO_NULL_CBC: + drvOpData->lacOpData. + cryptoStartSrcOffsetInBytes = crp_desc->crd_skip; + drvOpData->lacOpData. + messageLenToCipherInBytes = crp_desc->crd_len; + drvOpData->verifyResult = CPA_FALSE; + drvOpData->lacOpData.ivLenInBytes = NULL_BLOCK_LEN; + break; + case CRYPTO_DES_CBC: + drvOpData->lacOpData. + cryptoStartSrcOffsetInBytes = crp_desc->crd_skip; + drvOpData->lacOpData. + messageLenToCipherInBytes = crp_desc->crd_len; + drvOpData->verifyResult = CPA_FALSE; + drvOpData->lacOpData.ivLenInBytes = DES_BLOCK_LEN; + break; + case CRYPTO_3DES_CBC: + drvOpData->lacOpData. + cryptoStartSrcOffsetInBytes = crp_desc->crd_skip; + drvOpData->lacOpData. + messageLenToCipherInBytes = crp_desc->crd_len; + drvOpData->verifyResult = CPA_FALSE; + drvOpData->lacOpData.ivLenInBytes = DES3_BLOCK_LEN; + break; + case CRYPTO_ARC4: + drvOpData->lacOpData. + cryptoStartSrcOffsetInBytes = crp_desc->crd_skip; + drvOpData->lacOpData. + messageLenToCipherInBytes = crp_desc->crd_len; + drvOpData->verifyResult = CPA_FALSE; + drvOpData->lacOpData.ivLenInBytes = ARC4_COUNTER_LEN; + break; + case CRYPTO_AES_CBC: + drvOpData->lacOpData. + cryptoStartSrcOffsetInBytes = crp_desc->crd_skip; + drvOpData->lacOpData. + messageLenToCipherInBytes = crp_desc->crd_len; + drvOpData->verifyResult = CPA_FALSE; + drvOpData->lacOpData.ivLenInBytes = RIJNDAEL128_BLOCK_LEN; + break; + case CRYPTO_SHA1: + case CRYPTO_SHA1_HMAC: + case CRYPTO_SHA2_256: + case CRYPTO_SHA2_256_HMAC: + case CRYPTO_SHA2_384: + case CRYPTO_SHA2_384_HMAC: + case CRYPTO_SHA2_512: + case CRYPTO_SHA2_512_HMAC: + case CRYPTO_MD5: + case CRYPTO_MD5_HMAC: + drvOpData->lacOpData. + hashStartSrcOffsetInBytes = crp_desc->crd_skip; + drvOpData->lacOpData. + messageLenToHashInBytes = crp_desc->crd_len; + drvOpData->lacOpData. + pDigestResult = + icp_ocfDrvDigestPointerFind(drvOpData, crp_desc); + + if (NULL == drvOpData->lacOpData.pDigestResult) { + DPRINTK("%s(): ERROR - could not calculate " + "Digest Result memory address\n", __FUNCTION__); + return ICP_OCF_DRV_STATUS_FAIL; + } + + drvOpData->lacOpData.digestVerify = CPA_FALSE; + break; + default: + DPRINTK("%s(): Crypto process error - algorithm not " + "found \n", __FUNCTION__); + return ICP_OCF_DRV_STATUS_FAIL; + } + + /* Figure out what the IV is supposed to be */ + if ((crp_desc->crd_alg == CRYPTO_DES_CBC) || + (crp_desc->crd_alg == CRYPTO_3DES_CBC) || + (crp_desc->crd_alg == CRYPTO_AES_CBC)) { + /*ARC4 doesn't use an IV */ + if (crp_desc->crd_flags & CRD_F_IV_EXPLICIT) { + /* Explicit IV provided to OCF */ + drvOpData->lacOpData.pIv = crp_desc->crd_iv; + } else { + /* IV is not explicitly provided to OCF */ + + /* Point the LAC OP Data IV pointer to our allocated + storage location for this session. */ + drvOpData->lacOpData.pIv = drvOpData->ivData; + + if ((crp_desc->crd_flags & CRD_F_ENCRYPT) && + ((crp_desc->crd_flags & CRD_F_IV_PRESENT) == 0)) { + + /* Encrypting - need to create IV */ + randGenOpData.generateBits = CPA_TRUE; + randGenOpData.lenInBytes = MAX_IV_LEN_IN_BYTES; + + icp_ocfDrvPtrAndLenToFlatBuffer((Cpa8U *) + drvOpData-> + ivData, + MAX_IV_LEN_IN_BYTES, + &randData); + + if (CPA_STATUS_SUCCESS != + cpaCyRandGen(CPA_INSTANCE_HANDLE_SINGLE, + NULL, NULL, + &randGenOpData, &randData)) { + DPRINTK("%s(): ERROR - Failed to" + " generate" + " Initialisation Vector\n", + __FUNCTION__); + return ICP_OCF_DRV_STATUS_FAIL; + } + + crypto_copyback(drvOpData->crp-> + crp_flags, + drvOpData->crp->crp_buf, + crp_desc->crd_inject, + drvOpData->lacOpData. + ivLenInBytes, + (caddr_t) (drvOpData->lacOpData. + pIv)); + } else { + /* Reading IV from buffer */ + crypto_copydata(drvOpData->crp-> + crp_flags, + drvOpData->crp->crp_buf, + crp_desc->crd_inject, + drvOpData->lacOpData. + ivLenInBytes, + (caddr_t) (drvOpData->lacOpData. + pIv)); + } + + } + + } + + return ICP_OCF_DRV_STATUS_SUCCESS; +} + +/* Name : icp_ocfDrvDigestPointerFind + * + * Description : This function is used to find the memory address of where the + * digest information shall be stored in. Input buffer types are an skbuff, iov + * or flat buffer. The address is found using the buffer data start address and + * an offset. + * + * Note: In the case of a linux skbuff, the digest address may exist within + * a memory space linked to from the start buffer. These linked memory spaces + * must be traversed by the data length offset in order to find the digest start + * address. Whether there is enough space for the digest must also be checked. + */ +uint8_t *icp_ocfDrvDigestPointerFind(struct icp_drvOpData * drvOpData, + struct cryptodesc * crp_desc) +{ + + int offsetInBytes = crp_desc->crd_inject; + uint32_t digestSizeInBytes = drvOpData->digestSizeInBytes; + uint8_t *flat_buffer_base = NULL; + int flat_buffer_length = 0; + + if (drvOpData->crp->crp_flags & ICP_CRYPTO_F_PACKET_BUF) { + + return icp_ocfDrvPacketBufferDigestPointerFind(drvOpData, + offsetInBytes, + digestSizeInBytes); + + } else { + /* IOV or flat buffer */ + if (drvOpData->crp->crp_flags & CRYPTO_F_IOV) { + /*single IOV check has already been done */ + flat_buffer_base = ((struct uio *) + (drvOpData->crp->crp_buf))-> + uio_iov[0].iov_base; + flat_buffer_length = ((struct uio *) + (drvOpData->crp->crp_buf))-> + uio_iov[0].iov_len; + } else { + flat_buffer_base = (uint8_t *) drvOpData->crp->crp_buf; + flat_buffer_length = drvOpData->crp->crp_ilen; + } + + if (flat_buffer_length < (offsetInBytes + digestSizeInBytes)) { + DPRINTK("%s() Not enough space for Digest " + "(IOV/Flat Buffer) \n", __FUNCTION__); + return NULL; + } else { + return (uint8_t *) (flat_buffer_base + offsetInBytes); + } + } + DPRINTK("%s() Should not reach this point\n", __FUNCTION__); + return NULL; +} diff --git a/target/linux/generic-2.4/files/crypto/ocf/hifn/Makefile b/target/linux/generic-2.4/files/crypto/ocf/hifn/Makefile new file mode 100644 index 0000000000..163fed0543 --- /dev/null +++ b/target/linux/generic-2.4/files/crypto/ocf/hifn/Makefile @@ -0,0 +1,13 @@ +# for SGlinux builds +-include $(ROOTDIR)/modules/.config + +obj-$(CONFIG_OCF_HIFN) += hifn7751.o +obj-$(CONFIG_OCF_HIFNHIPP) += hifnHIPP.o + +obj ?= . +EXTRA_CFLAGS += -I$(obj)/.. -I$(obj)/ + +ifdef TOPDIR +-include $(TOPDIR)/Rules.make +endif + diff --git a/target/linux/generic-2.4/files/crypto/ocf/hifn/hifn7751.c b/target/linux/generic-2.4/files/crypto/ocf/hifn/hifn7751.c new file mode 100644 index 0000000000..6136e84ef7 --- /dev/null +++ b/target/linux/generic-2.4/files/crypto/ocf/hifn/hifn7751.c @@ -0,0 +1,2976 @@ +/* $OpenBSD: hifn7751.c,v 1.120 2002/05/17 00:33:34 deraadt Exp $ */ + +/*- + * Invertex AEON / Hifn 7751 driver + * Copyright (c) 1999 Invertex Inc. All rights reserved. + * Copyright (c) 1999 Theo de Raadt + * Copyright (c) 2000-2001 Network Security Technologies, Inc. + * http://www.netsec.net + * Copyright (c) 2003 Hifn Inc. + * + * This driver is based on a previous driver by Invertex, for which they + * requested: Please send any comments, feedback, bug-fixes, or feature + * requests to software@invertex.com. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. The name of the author may not be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR + * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES + * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. + * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * Effort sponsored in part by the Defense Advanced Research Projects + * Agency (DARPA) and Air Force Research Laboratory, Air Force + * Materiel Command, USAF, under agreement number F30602-01-2-0537. + * + * +__FBSDID("$FreeBSD: src/sys/dev/hifn/hifn7751.c,v 1.40 2007/03/21 03:42:49 sam Exp $"); + */ + +/* + * Driver for various Hifn encryption processors. + */ +#ifndef AUTOCONF_INCLUDED +#include +#endif +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include + +#if 1 +#define DPRINTF(a...) if (hifn_debug) { \ + printk("%s: ", sc ? \ + device_get_nameunit(sc->sc_dev) : "hifn"); \ + printk(a); \ + } else +#else +#define DPRINTF(a...) +#endif + +static inline int +pci_get_revid(struct pci_dev *dev) +{ + u8 rid = 0; + pci_read_config_byte(dev, PCI_REVISION_ID, &rid); + return rid; +} + +static struct hifn_stats hifnstats; + +#define debug hifn_debug +int hifn_debug = 0; +module_param(hifn_debug, int, 0644); +MODULE_PARM_DESC(hifn_debug, "Enable debug"); + +int hifn_maxbatch = 1; +module_param(hifn_maxbatch, int, 0644); +MODULE_PARM_DESC(hifn_maxbatch, "max ops to batch w/o interrupt"); + +int hifn_cache_linesize = 0x10; +module_param(hifn_cache_linesize, int, 0444); +MODULE_PARM_DESC(hifn_cache_linesize, "PCI config cache line size"); + +#ifdef MODULE_PARM +char *hifn_pllconfig = NULL; +MODULE_PARM(hifn_pllconfig, "s"); +#else +char hifn_pllconfig[32]; /* This setting is RO after loading */ +module_param_string(hifn_pllconfig, hifn_pllconfig, 32, 0444); +#endif +MODULE_PARM_DESC(hifn_pllconfig, "PLL config, ie., pci66, ext33, ..."); + +#ifdef HIFN_VULCANDEV +#include +#include + +static struct cdevsw vulcanpk_cdevsw; /* forward declaration */ +#endif + +/* + * Prototypes and count for the pci_device structure + */ +static int hifn_probe(struct pci_dev *dev, const struct pci_device_id *ent); +static void hifn_remove(struct pci_dev *dev); + +static int hifn_newsession(device_t, u_int32_t *, struct cryptoini *); +static int hifn_freesession(device_t, u_int64_t); +static int hifn_process(device_t, struct cryptop *, int); + +static device_method_t hifn_methods = { + /* crypto device methods */ + DEVMETHOD(cryptodev_newsession, hifn_newsession), + DEVMETHOD(cryptodev_freesession,hifn_freesession), + DEVMETHOD(cryptodev_process, hifn_process), +}; + +static void hifn_reset_board(struct hifn_softc *, int); +static void hifn_reset_puc(struct hifn_softc *); +static void hifn_puc_wait(struct hifn_softc *); +static int hifn_enable_crypto(struct hifn_softc *); +static void hifn_set_retry(struct hifn_softc *sc); +static void hifn_init_dma(struct hifn_softc *); +static void hifn_init_pci_registers(struct hifn_softc *); +static int hifn_sramsize(struct hifn_softc *); +static int hifn_dramsize(struct hifn_softc *); +static int hifn_ramtype(struct hifn_softc *); +static void hifn_sessions(struct hifn_softc *); +#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,19) +static irqreturn_t hifn_intr(int irq, void *arg); +#else +static irqreturn_t hifn_intr(int irq, void *arg, struct pt_regs *regs); +#endif +static u_int hifn_write_command(struct hifn_command *, u_int8_t *); +static u_int32_t hifn_next_signature(u_int32_t a, u_int cnt); +static void hifn_callback(struct hifn_softc *, struct hifn_command *, u_int8_t *); +static int hifn_crypto(struct hifn_softc *, struct hifn_command *, struct cryptop *, int); +static int hifn_readramaddr(struct hifn_softc *, int, u_int8_t *); +static int hifn_writeramaddr(struct hifn_softc *, int, u_int8_t *); +static int hifn_dmamap_load_src(struct hifn_softc *, struct hifn_command *); +static int hifn_dmamap_load_dst(struct hifn_softc *, struct hifn_command *); +static int hifn_init_pubrng(struct hifn_softc *); +static void hifn_tick(unsigned long arg); +static void hifn_abort(struct hifn_softc *); +static void hifn_alloc_slot(struct hifn_softc *, int *, int *, int *, int *); + +static void hifn_write_reg_0(struct hifn_softc *, bus_size_t, u_int32_t); +static void hifn_write_reg_1(struct hifn_softc *, bus_size_t, u_int32_t); + +#ifdef CONFIG_OCF_RANDOMHARVEST +static int hifn_read_random(void *arg, u_int32_t *buf, int len); +#endif + +#define HIFN_MAX_CHIPS 8 +static struct hifn_softc *hifn_chip_idx[HIFN_MAX_CHIPS]; + +static __inline u_int32_t +READ_REG_0(struct hifn_softc *sc, bus_size_t reg) +{ + u_int32_t v = readl(sc->sc_bar0 + reg); + sc->sc_bar0_lastreg = (bus_size_t) -1; + return (v); +} +#define WRITE_REG_0(sc, reg, val) hifn_write_reg_0(sc, reg, val) + +static __inline u_int32_t +READ_REG_1(struct hifn_softc *sc, bus_size_t reg) +{ + u_int32_t v = readl(sc->sc_bar1 + reg); + sc->sc_bar1_lastreg = (bus_size_t) -1; + return (v); +} +#define WRITE_REG_1(sc, reg, val) hifn_write_reg_1(sc, reg, val) + +/* + * map in a given buffer (great on some arches :-) + */ + +static int +pci_map_uio(struct hifn_softc *sc, struct hifn_operand *buf, struct uio *uio) +{ + struct iovec *iov = uio->uio_iov; + + DPRINTF("%s()\n", __FUNCTION__); + + buf->mapsize = 0; + for (buf->nsegs = 0; buf->nsegs < uio->uio_iovcnt; ) { + buf->segs[buf->nsegs].ds_addr = pci_map_single(sc->sc_pcidev, + iov->iov_base, iov->iov_len, + PCI_DMA_BIDIRECTIONAL); + buf->segs[buf->nsegs].ds_len = iov->iov_len; + buf->mapsize += iov->iov_len; + iov++; + buf->nsegs++; + } + /* identify this buffer by the first segment */ + buf->map = (void *) buf->segs[0].ds_addr; + return(0); +} + +/* + * map in a given sk_buff + */ + +static int +pci_map_skb(struct hifn_softc *sc,struct hifn_operand *buf,struct sk_buff *skb) +{ + int i; + + DPRINTF("%s()\n", __FUNCTION__); + + buf->mapsize = 0; + + buf->segs[0].ds_addr = pci_map_single(sc->sc_pcidev, + skb->data, skb_headlen(skb), PCI_DMA_BIDIRECTIONAL); + buf->segs[0].ds_len = skb_headlen(skb); + buf->mapsize += buf->segs[0].ds_len; + + buf->nsegs = 1; + + for (i = 0; i < skb_shinfo(skb)->nr_frags; ) { + buf->segs[buf->nsegs].ds_len = skb_shinfo(skb)->frags[i].size; + buf->segs[buf->nsegs].ds_addr = pci_map_single(sc->sc_pcidev, + page_address(skb_shinfo(skb)->frags[i].page) + + skb_shinfo(skb)->frags[i].page_offset, + buf->segs[buf->nsegs].ds_len, PCI_DMA_BIDIRECTIONAL); + buf->mapsize += buf->segs[buf->nsegs].ds_len; + buf->nsegs++; + } + + /* identify this buffer by the first segment */ + buf->map = (void *) buf->segs[0].ds_addr; + return(0); +} + +/* + * map in a given contiguous buffer + */ + +static int +pci_map_buf(struct hifn_softc *sc,struct hifn_operand *buf, void *b, int len) +{ + DPRINTF("%s()\n", __FUNCTION__); + + buf->mapsize = 0; + buf->segs[0].ds_addr = pci_map_single(sc->sc_pcidev, + b, len, PCI_DMA_BIDIRECTIONAL); + buf->segs[0].ds_len = len; + buf->mapsize += buf->segs[0].ds_len; + buf->nsegs = 1; + + /* identify this buffer by the first segment */ + buf->map = (void *) buf->segs[0].ds_addr; + return(0); +} + +#if 0 /* not needed at this time */ +static void +pci_sync_iov(struct hifn_softc *sc, struct hifn_operand *buf) +{ + int i; + + DPRINTF("%s()\n", __FUNCTION__); + for (i = 0; i < buf->nsegs; i++) + pci_dma_sync_single_for_cpu(sc->sc_pcidev, buf->segs[i].ds_addr, + buf->segs[i].ds_len, PCI_DMA_BIDIRECTIONAL); +} +#endif + +static void +pci_unmap_buf(struct hifn_softc *sc, struct hifn_operand *buf) +{ + int i; + DPRINTF("%s()\n", __FUNCTION__); + for (i = 0; i < buf->nsegs; i++) { + pci_unmap_single(sc->sc_pcidev, buf->segs[i].ds_addr, + buf->segs[i].ds_len, PCI_DMA_BIDIRECTIONAL); + buf->segs[i].ds_addr = 0; + buf->segs[i].ds_len = 0; + } + buf->nsegs = 0; + buf->mapsize = 0; + buf->map = 0; +} + +static const char* +hifn_partname(struct hifn_softc *sc) +{ + /* XXX sprintf numbers when not decoded */ + switch (pci_get_vendor(sc->sc_pcidev)) { + case PCI_VENDOR_HIFN: + switch (pci_get_device(sc->sc_pcidev)) { + case PCI_PRODUCT_HIFN_6500: return "Hifn 6500"; + case PCI_PRODUCT_HIFN_7751: return "Hifn 7751"; + case PCI_PRODUCT_HIFN_7811: return "Hifn 7811"; + case PCI_PRODUCT_HIFN_7951: return "Hifn 7951"; + case PCI_PRODUCT_HIFN_7955: return "Hifn 7955"; + case PCI_PRODUCT_HIFN_7956: return "Hifn 7956"; + } + return "Hifn unknown-part"; + case PCI_VENDOR_INVERTEX: + switch (pci_get_device(sc->sc_pcidev)) { + case PCI_PRODUCT_INVERTEX_AEON: return "Invertex AEON"; + } + return "Invertex unknown-part"; + case PCI_VENDOR_NETSEC: + switch (pci_get_device(sc->sc_pcidev)) { + case PCI_PRODUCT_NETSEC_7751: return "NetSec 7751"; + } + return "NetSec unknown-part"; + } + return "Unknown-vendor unknown-part"; +} + +static u_int +checkmaxmin(struct pci_dev *dev, const char *what, u_int v, u_int min, u_int max) +{ + struct hifn_softc *sc = pci_get_drvdata(dev); + if (v > max) { + device_printf(sc->sc_dev, "Warning, %s %u out of range, " + "using max %u\n", what, v, max); + v = max; + } else if (v < min) { + device_printf(sc->sc_dev, "Warning, %s %u out of range, " + "using min %u\n", what, v, min); + v = min; + } + return v; +} + +/* + * Select PLL configuration for 795x parts. This is complicated in + * that we cannot determine the optimal parameters without user input. + * The reference clock is derived from an external clock through a + * multiplier. The external clock is either the host bus (i.e. PCI) + * or an external clock generator. When using the PCI bus we assume + * the clock is either 33 or 66 MHz; for an external source we cannot + * tell the speed. + * + * PLL configuration is done with a string: "pci" for PCI bus, or "ext" + * for an external source, followed by the frequency. We calculate + * the appropriate multiplier and PLL register contents accordingly. + * When no configuration is given we default to "pci66" since that + * always will allow the card to work. If a card is using the PCI + * bus clock and in a 33MHz slot then it will be operating at half + * speed until the correct information is provided. + * + * We use a default setting of "ext66" because according to Mike Ham + * of HiFn, almost every board in existence has an external crystal + * populated at 66Mhz. Using PCI can be a problem on modern motherboards, + * because PCI33 can have clocks from 0 to 33Mhz, and some have + * non-PCI-compliant spread-spectrum clocks, which can confuse the pll. + */ +static void +hifn_getpllconfig(struct pci_dev *dev, u_int *pll) +{ + const char *pllspec = hifn_pllconfig; + u_int freq, mul, fl, fh; + u_int32_t pllconfig; + char *nxt; + + if (pllspec == NULL) + pllspec = "ext66"; + fl = 33, fh = 66; + pllconfig = 0; + if (strncmp(pllspec, "ext", 3) == 0) { + pllspec += 3; + pllconfig |= HIFN_PLL_REF_SEL; + switch (pci_get_device(dev)) { + case PCI_PRODUCT_HIFN_7955: + case PCI_PRODUCT_HIFN_7956: + fl = 20, fh = 100; + break; +#ifdef notyet + case PCI_PRODUCT_HIFN_7954: + fl = 20, fh = 66; + break; +#endif + } + } else if (strncmp(pllspec, "pci", 3) == 0) + pllspec += 3; + freq = strtoul(pllspec, &nxt, 10); + if (nxt == pllspec) + freq = 66; + else + freq = checkmaxmin(dev, "frequency", freq, fl, fh); + /* + * Calculate multiplier. We target a Fck of 266 MHz, + * allowing only even values, possibly rounded down. + * Multipliers > 8 must set the charge pump current. + */ + mul = checkmaxmin(dev, "PLL divisor", (266 / freq) &~ 1, 2, 12); + pllconfig |= (mul / 2 - 1) << HIFN_PLL_ND_SHIFT; + if (mul > 8) + pllconfig |= HIFN_PLL_IS; + *pll = pllconfig; +} + +/* + * Attach an interface that successfully probed. + */ +static int +hifn_probe(struct pci_dev *dev, const struct pci_device_id *ent) +{ + struct hifn_softc *sc = NULL; + char rbase; + u_int16_t ena, rev; + int rseg, rc; + unsigned long mem_start, mem_len; + static int num_chips = 0; + + DPRINTF("%s()\n", __FUNCTION__); + + if (pci_enable_device(dev) < 0) + return(-ENODEV); + + if (pci_set_mwi(dev)) + return(-ENODEV); + + if (!dev->irq) { + printk("hifn: found device with no IRQ assigned. check BIOS settings!"); + pci_disable_device(dev); + return(-ENODEV); + } + + sc = (struct hifn_softc *) kmalloc(sizeof(*sc), GFP_KERNEL); + if (!sc) + return(-ENOMEM); + memset(sc, 0, sizeof(*sc)); + + softc_device_init(sc, "hifn", num_chips, hifn_methods); + + sc->sc_pcidev = dev; + sc->sc_irq = -1; + sc->sc_cid = -1; + sc->sc_num = num_chips++; + if (sc->sc_num < HIFN_MAX_CHIPS) + hifn_chip_idx[sc->sc_num] = sc; + + pci_set_drvdata(sc->sc_pcidev, sc); + + spin_lock_init(&sc->sc_mtx); + + /* XXX handle power management */ + + /* + * The 7951 and 795x have a random number generator and + * public key support; note this. + */ + if (pci_get_vendor(dev) == PCI_VENDOR_HIFN && + (pci_get_device(dev) == PCI_PRODUCT_HIFN_7951 || + pci_get_device(dev) == PCI_PRODUCT_HIFN_7955 || + pci_get_device(dev) == PCI_PRODUCT_HIFN_7956)) + sc->sc_flags = HIFN_HAS_RNG | HIFN_HAS_PUBLIC; + /* + * The 7811 has a random number generator and + * we also note it's identity 'cuz of some quirks. + */ + if (pci_get_vendor(dev) == PCI_VENDOR_HIFN && + pci_get_device(dev) == PCI_PRODUCT_HIFN_7811) + sc->sc_flags |= HIFN_IS_7811 | HIFN_HAS_RNG; + + /* + * The 795x parts support AES. + */ + if (pci_get_vendor(dev) == PCI_VENDOR_HIFN && + (pci_get_device(dev) == PCI_PRODUCT_HIFN_7955 || + pci_get_device(dev) == PCI_PRODUCT_HIFN_7956)) { + sc->sc_flags |= HIFN_IS_7956 | HIFN_HAS_AES; + /* + * Select PLL configuration. This depends on the + * bus and board design and must be manually configured + * if the default setting is unacceptable. + */ + hifn_getpllconfig(dev, &sc->sc_pllconfig); + } + + /* + * Setup PCI resources. Note that we record the bus + * tag and handle for each register mapping, this is + * used by the READ_REG_0, WRITE_REG_0, READ_REG_1, + * and WRITE_REG_1 macros throughout the driver. + */ + mem_start = pci_resource_start(sc->sc_pcidev, 0); + mem_len = pci_resource_len(sc->sc_pcidev, 0); + sc->sc_bar0 = (ocf_iomem_t) ioremap(mem_start, mem_len); + if (!sc->sc_bar0) { + device_printf(sc->sc_dev, "cannot map bar%d register space\n", 0); + goto fail; + } + sc->sc_bar0_lastreg = (bus_size_t) -1; + + mem_start = pci_resource_start(sc->sc_pcidev, 1); + mem_len = pci_resource_len(sc->sc_pcidev, 1); + sc->sc_bar1 = (ocf_iomem_t) ioremap(mem_start, mem_len); + if (!sc->sc_bar1) { + device_printf(sc->sc_dev, "cannot map bar%d register space\n", 1); + goto fail; + } + sc->sc_bar1_lastreg = (bus_size_t) -1; + + /* fix up the bus size */ + if (pci_set_dma_mask(dev, DMA_32BIT_MASK)) { + device_printf(sc->sc_dev, "No usable DMA configuration, aborting.\n"); + goto fail; + } + if (pci_set_consistent_dma_mask(dev, DMA_32BIT_MASK)) { + device_printf(sc->sc_dev, + "No usable consistent DMA configuration, aborting.\n"); + goto fail; + } + + hifn_set_retry(sc); + + /* + * Setup the area where the Hifn DMA's descriptors + * and associated data structures. + */ + sc->sc_dma = (struct hifn_dma *) pci_alloc_consistent(dev, + sizeof(*sc->sc_dma), + &sc->sc_dma_physaddr); + if (!sc->sc_dma) { + device_printf(sc->sc_dev, "cannot alloc sc_dma\n"); + goto fail; + } + bzero(sc->sc_dma, sizeof(*sc->sc_dma)); + + /* + * Reset the board and do the ``secret handshake'' + * to enable the crypto support. Then complete the + * initialization procedure by setting up the interrupt + * and hooking in to the system crypto support so we'll + * get used for system services like the crypto device, + * IPsec, RNG device, etc. + */ + hifn_reset_board(sc, 0); + + if (hifn_enable_crypto(sc) != 0) { + device_printf(sc->sc_dev, "crypto enabling failed\n"); + goto fail; + } + hifn_reset_puc(sc); + + hifn_init_dma(sc); + hifn_init_pci_registers(sc); + + pci_set_master(sc->sc_pcidev); + + /* XXX can't dynamically determine ram type for 795x; force dram */ + if (sc->sc_flags & HIFN_IS_7956) + sc->sc_drammodel = 1; + else if (hifn_ramtype(sc)) + goto fail; + + if (sc->sc_drammodel == 0) + hifn_sramsize(sc); + else + hifn_dramsize(sc); + + /* + * Workaround for NetSec 7751 rev A: half ram size because two + * of the address lines were left floating + */ + if (pci_get_vendor(dev) == PCI_VENDOR_NETSEC && + pci_get_device(dev) == PCI_PRODUCT_NETSEC_7751 && + pci_get_revid(dev) == 0x61) /*XXX???*/ + sc->sc_ramsize >>= 1; + + /* + * Arrange the interrupt line. + */ + rc = request_irq(dev->irq, hifn_intr, IRQF_SHARED, "hifn", sc); + if (rc) { + device_printf(sc->sc_dev, "could not map interrupt: %d\n", rc); + goto fail; + } + sc->sc_irq = dev->irq; + + hifn_sessions(sc); + + /* + * NB: Keep only the low 16 bits; this masks the chip id + * from the 7951. + */ + rev = READ_REG_1(sc, HIFN_1_REVID) & 0xffff; + + rseg = sc->sc_ramsize / 1024; + rbase = 'K'; + if (sc->sc_ramsize >= (1024 * 1024)) { + rbase = 'M'; + rseg /= 1024; + } + device_printf(sc->sc_dev, "%s, rev %u, %d%cB %cram", + hifn_partname(sc), rev, + rseg, rbase, sc->sc_drammodel ? 'd' : 's'); + if (sc->sc_flags & HIFN_IS_7956) + printf(", pll=0x%x<%s clk, %ux mult>", + sc->sc_pllconfig, + sc->sc_pllconfig & HIFN_PLL_REF_SEL ? "ext" : "pci", + 2 + 2*((sc->sc_pllconfig & HIFN_PLL_ND) >> 11)); + printf("\n"); + + sc->sc_cid = crypto_get_driverid(softc_get_device(sc),CRYPTOCAP_F_HARDWARE); + if (sc->sc_cid < 0) { + device_printf(sc->sc_dev, "could not get crypto driver id\n"); + goto fail; + } + + WRITE_REG_0(sc, HIFN_0_PUCNFG, + READ_REG_0(sc, HIFN_0_PUCNFG) | HIFN_PUCNFG_CHIPID); + ena = READ_REG_0(sc, HIFN_0_PUSTAT) & HIFN_PUSTAT_CHIPENA; + + switch (ena) { + case HIFN_PUSTAT_ENA_2: + crypto_register(sc->sc_cid, CRYPTO_3DES_CBC, 0, 0); + crypto_register(sc->sc_cid, CRYPTO_ARC4, 0, 0); + if (sc->sc_flags & HIFN_HAS_AES) + crypto_register(sc->sc_cid, CRYPTO_AES_CBC, 0, 0); + /*FALLTHROUGH*/ + case HIFN_PUSTAT_ENA_1: + crypto_register(sc->sc_cid, CRYPTO_MD5, 0, 0); + crypto_register(sc->sc_cid, CRYPTO_SHA1, 0, 0); + crypto_register(sc->sc_cid, CRYPTO_MD5_HMAC, 0, 0); + crypto_register(sc->sc_cid, CRYPTO_SHA1_HMAC, 0, 0); + crypto_register(sc->sc_cid, CRYPTO_DES_CBC, 0, 0); + break; + } + + if (sc->sc_flags & (HIFN_HAS_PUBLIC | HIFN_HAS_RNG)) + hifn_init_pubrng(sc); + + init_timer(&sc->sc_tickto); + sc->sc_tickto.function = hifn_tick; + sc->sc_tickto.data = (unsigned long) sc->sc_num; + mod_timer(&sc->sc_tickto, jiffies + HZ); + + return (0); + +fail: + if (sc->sc_cid >= 0) + crypto_unregister_all(sc->sc_cid); + if (sc->sc_irq != -1) + free_irq(sc->sc_irq, sc); + if (sc->sc_dma) { + /* Turn off DMA polling */ + WRITE_REG_1(sc, HIFN_1_DMA_CNFG, HIFN_DMACNFG_MSTRESET | + HIFN_DMACNFG_DMARESET | HIFN_DMACNFG_MODE); + + pci_free_consistent(sc->sc_pcidev, + sizeof(*sc->sc_dma), + sc->sc_dma, sc->sc_dma_physaddr); + } + kfree(sc); + return (-ENXIO); +} + +/* + * Detach an interface that successfully probed. + */ +static void +hifn_remove(struct pci_dev *dev) +{ + struct hifn_softc *sc = pci_get_drvdata(dev); + unsigned long l_flags; + + DPRINTF("%s()\n", __FUNCTION__); + + KASSERT(sc != NULL, ("hifn_detach: null software carrier!")); + + /* disable interrupts */ + HIFN_LOCK(sc); + WRITE_REG_1(sc, HIFN_1_DMA_IER, 0); + HIFN_UNLOCK(sc); + + /*XXX other resources */ + del_timer_sync(&sc->sc_tickto); + + /* Turn off DMA polling */ + WRITE_REG_1(sc, HIFN_1_DMA_CNFG, HIFN_DMACNFG_MSTRESET | + HIFN_DMACNFG_DMARESET | HIFN_DMACNFG_MODE); + + crypto_unregister_all(sc->sc_cid); + + free_irq(sc->sc_irq, sc); + + pci_free_consistent(sc->sc_pcidev, sizeof(*sc->sc_dma), + sc->sc_dma, sc->sc_dma_physaddr); +} + + +static int +hifn_init_pubrng(struct hifn_softc *sc) +{ + int i; + + DPRINTF("%s()\n", __FUNCTION__); + + if ((sc->sc_flags & HIFN_IS_7811) == 0) { + /* Reset 7951 public key/rng engine */ + WRITE_REG_1(sc, HIFN_1_PUB_RESET, + READ_REG_1(sc, HIFN_1_PUB_RESET) | HIFN_PUBRST_RESET); + + for (i = 0; i < 100; i++) { + DELAY(1000); + if ((READ_REG_1(sc, HIFN_1_PUB_RESET) & + HIFN_PUBRST_RESET) == 0) + break; + } + + if (i == 100) { + device_printf(sc->sc_dev, "public key init failed\n"); + return (1); + } + } + + /* Enable the rng, if available */ +#ifdef CONFIG_OCF_RANDOMHARVEST + if (sc->sc_flags & HIFN_HAS_RNG) { + if (sc->sc_flags & HIFN_IS_7811) { + u_int32_t r; + r = READ_REG_1(sc, HIFN_1_7811_RNGENA); + if (r & HIFN_7811_RNGENA_ENA) { + r &= ~HIFN_7811_RNGENA_ENA; + WRITE_REG_1(sc, HIFN_1_7811_RNGENA, r); + } + WRITE_REG_1(sc, HIFN_1_7811_RNGCFG, + HIFN_7811_RNGCFG_DEFL); + r |= HIFN_7811_RNGENA_ENA; + WRITE_REG_1(sc, HIFN_1_7811_RNGENA, r); + } else + WRITE_REG_1(sc, HIFN_1_RNG_CONFIG, + READ_REG_1(sc, HIFN_1_RNG_CONFIG) | + HIFN_RNGCFG_ENA); + + sc->sc_rngfirst = 1; + crypto_rregister(sc->sc_cid, hifn_read_random, sc); + } +#endif + + /* Enable public key engine, if available */ + if (sc->sc_flags & HIFN_HAS_PUBLIC) { + WRITE_REG_1(sc, HIFN_1_PUB_IEN, HIFN_PUBIEN_DONE); + sc->sc_dmaier |= HIFN_DMAIER_PUBDONE; + WRITE_REG_1(sc, HIFN_1_DMA_IER, sc->sc_dmaier); +#ifdef HIFN_VULCANDEV + sc->sc_pkdev = make_dev(&vulcanpk_cdevsw, 0, + UID_ROOT, GID_WHEEL, 0666, + "vulcanpk"); + sc->sc_pkdev->si_drv1 = sc; +#endif + } + + return (0); +} + +#ifdef CONFIG_OCF_RANDOMHARVEST +static int +hifn_read_random(void *arg, u_int32_t *buf, int len) +{ + struct hifn_softc *sc = (struct hifn_softc *) arg; + u_int32_t sts; + int i, rc = 0; + + if (len <= 0) + return rc; + + if (sc->sc_flags & HIFN_IS_7811) { + /* ONLY VALID ON 7811!!!! */ + for (i = 0; i < 5; i++) { + sts = READ_REG_1(sc, HIFN_1_7811_RNGSTS); + if (sts & HIFN_7811_RNGSTS_UFL) { + device_printf(sc->sc_dev, + "RNG underflow: disabling\n"); + /* DAVIDM perhaps return -1 */ + break; + } + if ((sts & HIFN_7811_RNGSTS_RDY) == 0) + break; + + /* + * There are at least two words in the RNG FIFO + * at this point. + */ + if (rc < len) + buf[rc++] = READ_REG_1(sc, HIFN_1_7811_RNGDAT); + if (rc < len) + buf[rc++] = READ_REG_1(sc, HIFN_1_7811_RNGDAT); + } + } else + buf[rc++] = READ_REG_1(sc, HIFN_1_RNG_DATA); + + /* NB: discard first data read */ + if (sc->sc_rngfirst) { + sc->sc_rngfirst = 0; + rc = 0; + } + + return(rc); +} +#endif /* CONFIG_OCF_RANDOMHARVEST */ + +static void +hifn_puc_wait(struct hifn_softc *sc) +{ + int i; + int reg = HIFN_0_PUCTRL; + + if (sc->sc_flags & HIFN_IS_7956) { + reg = HIFN_0_PUCTRL2; + } + + for (i = 5000; i > 0; i--) { + DELAY(1); + if (!(READ_REG_0(sc, reg) & HIFN_PUCTRL_RESET)) + break; + } + if (!i) + device_printf(sc->sc_dev, "proc unit did not reset(0x%x)\n", + READ_REG_0(sc, HIFN_0_PUCTRL)); +} + +/* + * Reset the processing unit. + */ +static void +hifn_reset_puc(struct hifn_softc *sc) +{ + /* Reset processing unit */ + int reg = HIFN_0_PUCTRL; + + if (sc->sc_flags & HIFN_IS_7956) { + reg = HIFN_0_PUCTRL2; + } + WRITE_REG_0(sc, reg, HIFN_PUCTRL_DMAENA); + + hifn_puc_wait(sc); +} + +/* + * Set the Retry and TRDY registers; note that we set them to + * zero because the 7811 locks up when forced to retry (section + * 3.6 of "Specification Update SU-0014-04". Not clear if we + * should do this for all Hifn parts, but it doesn't seem to hurt. + */ +static void +hifn_set_retry(struct hifn_softc *sc) +{ + DPRINTF("%s()\n", __FUNCTION__); + /* NB: RETRY only responds to 8-bit reads/writes */ + pci_write_config_byte(sc->sc_pcidev, HIFN_RETRY_TIMEOUT, 0); + pci_write_config_dword(sc->sc_pcidev, HIFN_TRDY_TIMEOUT, 0); + /* piggy back the cache line setting here */ + pci_write_config_byte(sc->sc_pcidev, PCI_CACHE_LINE_SIZE, hifn_cache_linesize); +} + +/* + * Resets the board. Values in the regesters are left as is + * from the reset (i.e. initial values are assigned elsewhere). + */ +static void +hifn_reset_board(struct hifn_softc *sc, int full) +{ + u_int32_t reg; + + DPRINTF("%s()\n", __FUNCTION__); + /* + * Set polling in the DMA configuration register to zero. 0x7 avoids + * resetting the board and zeros out the other fields. + */ + WRITE_REG_1(sc, HIFN_1_DMA_CNFG, HIFN_DMACNFG_MSTRESET | + HIFN_DMACNFG_DMARESET | HIFN_DMACNFG_MODE); + + /* + * Now that polling has been disabled, we have to wait 1 ms + * before resetting the board. + */ + DELAY(1000); + + /* Reset the DMA unit */ + if (full) { + WRITE_REG_1(sc, HIFN_1_DMA_CNFG, HIFN_DMACNFG_MODE); + DELAY(1000); + } else { + WRITE_REG_1(sc, HIFN_1_DMA_CNFG, + HIFN_DMACNFG_MODE | HIFN_DMACNFG_MSTRESET); + hifn_reset_puc(sc); + } + + KASSERT(sc->sc_dma != NULL, ("hifn_reset_board: null DMA tag!")); + bzero(sc->sc_dma, sizeof(*sc->sc_dma)); + + /* Bring dma unit out of reset */ + WRITE_REG_1(sc, HIFN_1_DMA_CNFG, HIFN_DMACNFG_MSTRESET | + HIFN_DMACNFG_DMARESET | HIFN_DMACNFG_MODE); + + hifn_puc_wait(sc); + hifn_set_retry(sc); + + if (sc->sc_flags & HIFN_IS_7811) { + for (reg = 0; reg < 1000; reg++) { + if (READ_REG_1(sc, HIFN_1_7811_MIPSRST) & + HIFN_MIPSRST_CRAMINIT) + break; + DELAY(1000); + } + if (reg == 1000) + device_printf(sc->sc_dev, ": cram init timeout\n"); + } else { + /* set up DMA configuration register #2 */ + /* turn off all PK and BAR0 swaps */ + WRITE_REG_1(sc, HIFN_1_DMA_CNFG2, + (3 << HIFN_DMACNFG2_INIT_WRITE_BURST_SHIFT)| + (3 << HIFN_DMACNFG2_INIT_READ_BURST_SHIFT)| + (2 << HIFN_DMACNFG2_TGT_WRITE_BURST_SHIFT)| + (2 << HIFN_DMACNFG2_TGT_READ_BURST_SHIFT)); + } +} + +static u_int32_t +hifn_next_signature(u_int32_t a, u_int cnt) +{ + int i; + u_int32_t v; + + for (i = 0; i < cnt; i++) { + + /* get the parity */ + v = a & 0x80080125; + v ^= v >> 16; + v ^= v >> 8; + v ^= v >> 4; + v ^= v >> 2; + v ^= v >> 1; + + a = (v & 1) ^ (a << 1); + } + + return a; +} + + +/* + * Checks to see if crypto is already enabled. If crypto isn't enable, + * "hifn_enable_crypto" is called to enable it. The check is important, + * as enabling crypto twice will lock the board. + */ +static int +hifn_enable_crypto(struct hifn_softc *sc) +{ + u_int32_t dmacfg, ramcfg, encl, addr, i; + char offtbl[] = { 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00 }; + + DPRINTF("%s()\n", __FUNCTION__); + + ramcfg = READ_REG_0(sc, HIFN_0_PUCNFG); + dmacfg = READ_REG_1(sc, HIFN_1_DMA_CNFG); + + /* + * The RAM config register's encrypt level bit needs to be set before + * every read performed on the encryption level register. + */ + WRITE_REG_0(sc, HIFN_0_PUCNFG, ramcfg | HIFN_PUCNFG_CHIPID); + + encl = READ_REG_0(sc, HIFN_0_PUSTAT) & HIFN_PUSTAT_CHIPENA; + + /* + * Make sure we don't re-unlock. Two unlocks kills chip until the + * next reboot. + */ + if (encl == HIFN_PUSTAT_ENA_1 || encl == HIFN_PUSTAT_ENA_2) { +#ifdef HIFN_DEBUG + if (hifn_debug) + device_printf(sc->sc_dev, + "Strong crypto already enabled!\n"); +#endif + goto report; + } + + if (encl != 0 && encl != HIFN_PUSTAT_ENA_0) { +#ifdef HIFN_DEBUG + if (hifn_debug) + device_printf(sc->sc_dev, + "Unknown encryption level 0x%x\n", encl); +#endif + return 1; + } + + WRITE_REG_1(sc, HIFN_1_DMA_CNFG, HIFN_DMACNFG_UNLOCK | + HIFN_DMACNFG_MSTRESET | HIFN_DMACNFG_DMARESET | HIFN_DMACNFG_MODE); + DELAY(1000); + addr = READ_REG_1(sc, HIFN_UNLOCK_SECRET1); + DELAY(1000); + WRITE_REG_1(sc, HIFN_UNLOCK_SECRET2, 0); + DELAY(1000); + + for (i = 0; i <= 12; i++) { + addr = hifn_next_signature(addr, offtbl[i] + 0x101); + WRITE_REG_1(sc, HIFN_UNLOCK_SECRET2, addr); + + DELAY(1000); + } + + WRITE_REG_0(sc, HIFN_0_PUCNFG, ramcfg | HIFN_PUCNFG_CHIPID); + encl = READ_REG_0(sc, HIFN_0_PUSTAT) & HIFN_PUSTAT_CHIPENA; + +#ifdef HIFN_DEBUG + if (hifn_debug) { + if (encl != HIFN_PUSTAT_ENA_1 && encl != HIFN_PUSTAT_ENA_2) + device_printf(sc->sc_dev, "Engine is permanently " + "locked until next system reset!\n"); + else + device_printf(sc->sc_dev, "Engine enabled " + "successfully!\n"); + } +#endif + +report: + WRITE_REG_0(sc, HIFN_0_PUCNFG, ramcfg); + WRITE_REG_1(sc, HIFN_1_DMA_CNFG, dmacfg); + + switch (encl) { + case HIFN_PUSTAT_ENA_1: + case HIFN_PUSTAT_ENA_2: + break; + case HIFN_PUSTAT_ENA_0: + default: + device_printf(sc->sc_dev, "disabled\n"); + break; + } + + return 0; +} + +/* + * Give initial values to the registers listed in the "Register Space" + * section of the HIFN Software Development reference manual. + */ +static void +hifn_init_pci_registers(struct hifn_softc *sc) +{ + DPRINTF("%s()\n", __FUNCTION__); + + /* write fixed values needed by the Initialization registers */ + WRITE_REG_0(sc, HIFN_0_PUCTRL, HIFN_PUCTRL_DMAENA); + WRITE_REG_0(sc, HIFN_0_FIFOCNFG, HIFN_FIFOCNFG_THRESHOLD); + WRITE_REG_0(sc, HIFN_0_PUIER, HIFN_PUIER_DSTOVER); + + /* write all 4 ring address registers */ + WRITE_REG_1(sc, HIFN_1_DMA_CRAR, sc->sc_dma_physaddr + + offsetof(struct hifn_dma, cmdr[0])); + WRITE_REG_1(sc, HIFN_1_DMA_SRAR, sc->sc_dma_physaddr + + offsetof(struct hifn_dma, srcr[0])); + WRITE_REG_1(sc, HIFN_1_DMA_DRAR, sc->sc_dma_physaddr + + offsetof(struct hifn_dma, dstr[0])); + WRITE_REG_1(sc, HIFN_1_DMA_RRAR, sc->sc_dma_physaddr + + offsetof(struct hifn_dma, resr[0])); + + DELAY(2000); + + /* write status register */ + WRITE_REG_1(sc, HIFN_1_DMA_CSR, + HIFN_DMACSR_D_CTRL_DIS | HIFN_DMACSR_R_CTRL_DIS | + HIFN_DMACSR_S_CTRL_DIS | HIFN_DMACSR_C_CTRL_DIS | + HIFN_DMACSR_D_ABORT | HIFN_DMACSR_D_DONE | HIFN_DMACSR_D_LAST | + HIFN_DMACSR_D_WAIT | HIFN_DMACSR_D_OVER | + HIFN_DMACSR_R_ABORT | HIFN_DMACSR_R_DONE | HIFN_DMACSR_R_LAST | + HIFN_DMACSR_R_WAIT | HIFN_DMACSR_R_OVER | + HIFN_DMACSR_S_ABORT | HIFN_DMACSR_S_DONE | HIFN_DMACSR_S_LAST | + HIFN_DMACSR_S_WAIT | + HIFN_DMACSR_C_ABORT | HIFN_DMACSR_C_DONE | HIFN_DMACSR_C_LAST | + HIFN_DMACSR_C_WAIT | + HIFN_DMACSR_ENGINE | + ((sc->sc_flags & HIFN_HAS_PUBLIC) ? + HIFN_DMACSR_PUBDONE : 0) | + ((sc->sc_flags & HIFN_IS_7811) ? + HIFN_DMACSR_ILLW | HIFN_DMACSR_ILLR : 0)); + + sc->sc_d_busy = sc->sc_r_busy = sc->sc_s_busy = sc->sc_c_busy = 0; + sc->sc_dmaier |= HIFN_DMAIER_R_DONE | HIFN_DMAIER_C_ABORT | + HIFN_DMAIER_D_OVER | HIFN_DMAIER_R_OVER | + HIFN_DMAIER_S_ABORT | HIFN_DMAIER_D_ABORT | HIFN_DMAIER_R_ABORT | + ((sc->sc_flags & HIFN_IS_7811) ? + HIFN_DMAIER_ILLW | HIFN_DMAIER_ILLR : 0); + sc->sc_dmaier &= ~HIFN_DMAIER_C_WAIT; + WRITE_REG_1(sc, HIFN_1_DMA_IER, sc->sc_dmaier); + + + if (sc->sc_flags & HIFN_IS_7956) { + u_int32_t pll; + + WRITE_REG_0(sc, HIFN_0_PUCNFG, HIFN_PUCNFG_COMPSING | + HIFN_PUCNFG_TCALLPHASES | + HIFN_PUCNFG_TCDRVTOTEM | HIFN_PUCNFG_BUS32); + + /* turn off the clocks and insure bypass is set */ + pll = READ_REG_1(sc, HIFN_1_PLL); + pll = (pll &~ (HIFN_PLL_PK_CLK_SEL | HIFN_PLL_PE_CLK_SEL)) + | HIFN_PLL_BP | HIFN_PLL_MBSET; + WRITE_REG_1(sc, HIFN_1_PLL, pll); + DELAY(10*1000); /* 10ms */ + + /* change configuration */ + pll = (pll &~ HIFN_PLL_CONFIG) | sc->sc_pllconfig; + WRITE_REG_1(sc, HIFN_1_PLL, pll); + DELAY(10*1000); /* 10ms */ + + /* disable bypass */ + pll &= ~HIFN_PLL_BP; + WRITE_REG_1(sc, HIFN_1_PLL, pll); + /* enable clocks with new configuration */ + pll |= HIFN_PLL_PK_CLK_SEL | HIFN_PLL_PE_CLK_SEL; + WRITE_REG_1(sc, HIFN_1_PLL, pll); + } else { + WRITE_REG_0(sc, HIFN_0_PUCNFG, HIFN_PUCNFG_COMPSING | + HIFN_PUCNFG_DRFR_128 | HIFN_PUCNFG_TCALLPHASES | + HIFN_PUCNFG_TCDRVTOTEM | HIFN_PUCNFG_BUS32 | + (sc->sc_drammodel ? HIFN_PUCNFG_DRAM : HIFN_PUCNFG_SRAM)); + } + + WRITE_REG_0(sc, HIFN_0_PUISR, HIFN_PUISR_DSTOVER); + WRITE_REG_1(sc, HIFN_1_DMA_CNFG, HIFN_DMACNFG_MSTRESET | + HIFN_DMACNFG_DMARESET | HIFN_DMACNFG_MODE | HIFN_DMACNFG_LAST | + ((HIFN_POLL_FREQUENCY << 16 ) & HIFN_DMACNFG_POLLFREQ) | + ((HIFN_POLL_SCALAR << 8) & HIFN_DMACNFG_POLLINVAL)); +} + +/* + * The maximum number of sessions supported by the card + * is dependent on the amount of context ram, which + * encryption algorithms are enabled, and how compression + * is configured. This should be configured before this + * routine is called. + */ +static void +hifn_sessions(struct hifn_softc *sc) +{ + u_int32_t pucnfg; + int ctxsize; + + DPRINTF("%s()\n", __FUNCTION__); + + pucnfg = READ_REG_0(sc, HIFN_0_PUCNFG); + + if (pucnfg & HIFN_PUCNFG_COMPSING) { + if (pucnfg & HIFN_PUCNFG_ENCCNFG) + ctxsize = 128; + else + ctxsize = 512; + /* + * 7955/7956 has internal context memory of 32K + */ + if (sc->sc_flags & HIFN_IS_7956) + sc->sc_maxses = 32768 / ctxsize; + else + sc->sc_maxses = 1 + + ((sc->sc_ramsize - 32768) / ctxsize); + } else + sc->sc_maxses = sc->sc_ramsize / 16384; + + if (sc->sc_maxses > 2048) + sc->sc_maxses = 2048; +} + +/* + * Determine ram type (sram or dram). Board should be just out of a reset + * state when this is called. + */ +static int +hifn_ramtype(struct hifn_softc *sc) +{ + u_int8_t data[8], dataexpect[8]; + int i; + + for (i = 0; i < sizeof(data); i++) + data[i] = dataexpect[i] = 0x55; + if (hifn_writeramaddr(sc, 0, data)) + return (-1); + if (hifn_readramaddr(sc, 0, data)) + return (-1); + if (bcmp(data, dataexpect, sizeof(data)) != 0) { + sc->sc_drammodel = 1; + return (0); + } + + for (i = 0; i < sizeof(data); i++) + data[i] = dataexpect[i] = 0xaa; + if (hifn_writeramaddr(sc, 0, data)) + return (-1); + if (hifn_readramaddr(sc, 0, data)) + return (-1); + if (bcmp(data, dataexpect, sizeof(data)) != 0) { + sc->sc_drammodel = 1; + return (0); + } + + return (0); +} + +#define HIFN_SRAM_MAX (32 << 20) +#define HIFN_SRAM_STEP_SIZE 16384 +#define HIFN_SRAM_GRANULARITY (HIFN_SRAM_MAX / HIFN_SRAM_STEP_SIZE) + +static int +hifn_sramsize(struct hifn_softc *sc) +{ + u_int32_t a; + u_int8_t data[8]; + u_int8_t dataexpect[sizeof(data)]; + int32_t i; + + for (i = 0; i < sizeof(data); i++) + data[i] = dataexpect[i] = i ^ 0x5a; + + for (i = HIFN_SRAM_GRANULARITY - 1; i >= 0; i--) { + a = i * HIFN_SRAM_STEP_SIZE; + bcopy(&i, data, sizeof(i)); + hifn_writeramaddr(sc, a, data); + } + + for (i = 0; i < HIFN_SRAM_GRANULARITY; i++) { + a = i * HIFN_SRAM_STEP_SIZE; + bcopy(&i, dataexpect, sizeof(i)); + if (hifn_readramaddr(sc, a, data) < 0) + return (0); + if (bcmp(data, dataexpect, sizeof(data)) != 0) + return (0); + sc->sc_ramsize = a + HIFN_SRAM_STEP_SIZE; + } + + return (0); +} + +/* + * XXX For dram boards, one should really try all of the + * HIFN_PUCNFG_DSZ_*'s. This just assumes that PUCNFG + * is already set up correctly. + */ +static int +hifn_dramsize(struct hifn_softc *sc) +{ + u_int32_t cnfg; + + if (sc->sc_flags & HIFN_IS_7956) { + /* + * 7955/7956 have a fixed internal ram of only 32K. + */ + sc->sc_ramsize = 32768; + } else { + cnfg = READ_REG_0(sc, HIFN_0_PUCNFG) & + HIFN_PUCNFG_DRAMMASK; + sc->sc_ramsize = 1 << ((cnfg >> 13) + 18); + } + return (0); +} + +static void +hifn_alloc_slot(struct hifn_softc *sc, int *cmdp, int *srcp, int *dstp, int *resp) +{ + struct hifn_dma *dma = sc->sc_dma; + + DPRINTF("%s()\n", __FUNCTION__); + + if (dma->cmdi == HIFN_D_CMD_RSIZE) { + dma->cmdi = 0; + dma->cmdr[HIFN_D_CMD_RSIZE].l = htole32(HIFN_D_JUMP|HIFN_D_MASKDONEIRQ); + wmb(); + dma->cmdr[HIFN_D_CMD_RSIZE].l |= htole32(HIFN_D_VALID); + HIFN_CMDR_SYNC(sc, HIFN_D_CMD_RSIZE, + BUS_DMASYNC_PREWRITE | BUS_DMASYNC_PREREAD); + } + *cmdp = dma->cmdi++; + dma->cmdk = dma->cmdi; + + if (dma->srci == HIFN_D_SRC_RSIZE) { + dma->srci = 0; + dma->srcr[HIFN_D_SRC_RSIZE].l = htole32(HIFN_D_JUMP|HIFN_D_MASKDONEIRQ); + wmb(); + dma->srcr[HIFN_D_SRC_RSIZE].l |= htole32(HIFN_D_VALID); + HIFN_SRCR_SYNC(sc, HIFN_D_SRC_RSIZE, + BUS_DMASYNC_PREWRITE | BUS_DMASYNC_PREREAD); + } + *srcp = dma->srci++; + dma->srck = dma->srci; + + if (dma->dsti == HIFN_D_DST_RSIZE) { + dma->dsti = 0; + dma->dstr[HIFN_D_DST_RSIZE].l = htole32(HIFN_D_JUMP|HIFN_D_MASKDONEIRQ); + wmb(); + dma->dstr[HIFN_D_DST_RSIZE].l |= htole32(HIFN_D_VALID); + HIFN_DSTR_SYNC(sc, HIFN_D_DST_RSIZE, + BUS_DMASYNC_PREWRITE | BUS_DMASYNC_PREREAD); + } + *dstp = dma->dsti++; + dma->dstk = dma->dsti; + + if (dma->resi == HIFN_D_RES_RSIZE) { + dma->resi = 0; + dma->resr[HIFN_D_RES_RSIZE].l = htole32(HIFN_D_JUMP|HIFN_D_MASKDONEIRQ); + wmb(); + dma->resr[HIFN_D_RES_RSIZE].l |= htole32(HIFN_D_VALID); + HIFN_RESR_SYNC(sc, HIFN_D_RES_RSIZE, + BUS_DMASYNC_PREWRITE | BUS_DMASYNC_PREREAD); + } + *resp = dma->resi++; + dma->resk = dma->resi; +} + +static int +hifn_writeramaddr(struct hifn_softc *sc, int addr, u_int8_t *data) +{ + struct hifn_dma *dma = sc->sc_dma; + hifn_base_command_t wc; + const u_int32_t masks = HIFN_D_VALID | HIFN_D_LAST | HIFN_D_MASKDONEIRQ; + int r, cmdi, resi, srci, dsti; + + DPRINTF("%s()\n", __FUNCTION__); + + wc.masks = htole16(3 << 13); + wc.session_num = htole16(addr >> 14); + wc.total_source_count = htole16(8); + wc.total_dest_count = htole16(addr & 0x3fff); + + hifn_alloc_slot(sc, &cmdi, &srci, &dsti, &resi); + + WRITE_REG_1(sc, HIFN_1_DMA_CSR, + HIFN_DMACSR_C_CTRL_ENA | HIFN_DMACSR_S_CTRL_ENA | + HIFN_DMACSR_D_CTRL_ENA | HIFN_DMACSR_R_CTRL_ENA); + + /* build write command */ + bzero(dma->command_bufs[cmdi], HIFN_MAX_COMMAND); + *(hifn_base_command_t *)dma->command_bufs[cmdi] = wc; + bcopy(data, &dma->test_src, sizeof(dma->test_src)); + + dma->srcr[srci].p = htole32(sc->sc_dma_physaddr + + offsetof(struct hifn_dma, test_src)); + dma->dstr[dsti].p = htole32(sc->sc_dma_physaddr + + offsetof(struct hifn_dma, test_dst)); + + dma->cmdr[cmdi].l = htole32(16 | masks); + dma->srcr[srci].l = htole32(8 | masks); + dma->dstr[dsti].l = htole32(4 | masks); + dma->resr[resi].l = htole32(4 | masks); + + for (r = 10000; r >= 0; r--) { + DELAY(10); + if ((dma->resr[resi].l & htole32(HIFN_D_VALID)) == 0) + break; + } + if (r == 0) { + device_printf(sc->sc_dev, "writeramaddr -- " + "result[%d](addr %d) still valid\n", resi, addr); + r = -1; + return (-1); + } else + r = 0; + + WRITE_REG_1(sc, HIFN_1_DMA_CSR, + HIFN_DMACSR_C_CTRL_DIS | HIFN_DMACSR_S_CTRL_DIS | + HIFN_DMACSR_D_CTRL_DIS | HIFN_DMACSR_R_CTRL_DIS); + + return (r); +} + +static int +hifn_readramaddr(struct hifn_softc *sc, int addr, u_int8_t *data) +{ + struct hifn_dma *dma = sc->sc_dma; + hifn_base_command_t rc; + const u_int32_t masks = HIFN_D_VALID | HIFN_D_LAST | HIFN_D_MASKDONEIRQ; + int r, cmdi, srci, dsti, resi; + + DPRINTF("%s()\n", __FUNCTION__); + + rc.masks = htole16(2 << 13); + rc.session_num = htole16(addr >> 14); + rc.total_source_count = htole16(addr & 0x3fff); + rc.total_dest_count = htole16(8); + + hifn_alloc_slot(sc, &cmdi, &srci, &dsti, &resi); + + WRITE_REG_1(sc, HIFN_1_DMA_CSR, + HIFN_DMACSR_C_CTRL_ENA | HIFN_DMACSR_S_CTRL_ENA | + HIFN_DMACSR_D_CTRL_ENA | HIFN_DMACSR_R_CTRL_ENA); + + bzero(dma->command_bufs[cmdi], HIFN_MAX_COMMAND); + *(hifn_base_command_t *)dma->command_bufs[cmdi] = rc; + + dma->srcr[srci].p = htole32(sc->sc_dma_physaddr + + offsetof(struct hifn_dma, test_src)); + dma->test_src = 0; + dma->dstr[dsti].p = htole32(sc->sc_dma_physaddr + + offsetof(struct hifn_dma, test_dst)); + dma->test_dst = 0; + dma->cmdr[cmdi].l = htole32(8 | masks); + dma->srcr[srci].l = htole32(8 | masks); + dma->dstr[dsti].l = htole32(8 | masks); + dma->resr[resi].l = htole32(HIFN_MAX_RESULT | masks); + + for (r = 10000; r >= 0; r--) { + DELAY(10); + if ((dma->resr[resi].l & htole32(HIFN_D_VALID)) == 0) + break; + } + if (r == 0) { + device_printf(sc->sc_dev, "readramaddr -- " + "result[%d](addr %d) still valid\n", resi, addr); + r = -1; + } else { + r = 0; + bcopy(&dma->test_dst, data, sizeof(dma->test_dst)); + } + + WRITE_REG_1(sc, HIFN_1_DMA_CSR, + HIFN_DMACSR_C_CTRL_DIS | HIFN_DMACSR_S_CTRL_DIS | + HIFN_DMACSR_D_CTRL_DIS | HIFN_DMACSR_R_CTRL_DIS); + + return (r); +} + +/* + * Initialize the descriptor rings. + */ +static void +hifn_init_dma(struct hifn_softc *sc) +{ + struct hifn_dma *dma = sc->sc_dma; + int i; + + DPRINTF("%s()\n", __FUNCTION__); + + hifn_set_retry(sc); + + /* initialize static pointer values */ + for (i = 0; i < HIFN_D_CMD_RSIZE; i++) + dma->cmdr[i].p = htole32(sc->sc_dma_physaddr + + offsetof(struct hifn_dma, command_bufs[i][0])); + for (i = 0; i < HIFN_D_RES_RSIZE; i++) + dma->resr[i].p = htole32(sc->sc_dma_physaddr + + offsetof(struct hifn_dma, result_bufs[i][0])); + + dma->cmdr[HIFN_D_CMD_RSIZE].p = + htole32(sc->sc_dma_physaddr + offsetof(struct hifn_dma, cmdr[0])); + dma->srcr[HIFN_D_SRC_RSIZE].p = + htole32(sc->sc_dma_physaddr + offsetof(struct hifn_dma, srcr[0])); + dma->dstr[HIFN_D_DST_RSIZE].p = + htole32(sc->sc_dma_physaddr + offsetof(struct hifn_dma, dstr[0])); + dma->resr[HIFN_D_RES_RSIZE].p = + htole32(sc->sc_dma_physaddr + offsetof(struct hifn_dma, resr[0])); + + dma->cmdu = dma->srcu = dma->dstu = dma->resu = 0; + dma->cmdi = dma->srci = dma->dsti = dma->resi = 0; + dma->cmdk = dma->srck = dma->dstk = dma->resk = 0; +} + +/* + * Writes out the raw command buffer space. Returns the + * command buffer size. + */ +static u_int +hifn_write_command(struct hifn_command *cmd, u_int8_t *buf) +{ + struct hifn_softc *sc = NULL; + u_int8_t *buf_pos; + hifn_base_command_t *base_cmd; + hifn_mac_command_t *mac_cmd; + hifn_crypt_command_t *cry_cmd; + int using_mac, using_crypt, len, ivlen; + u_int32_t dlen, slen; + + DPRINTF("%s()\n", __FUNCTION__); + + buf_pos = buf; + using_mac = cmd->base_masks & HIFN_BASE_CMD_MAC; + using_crypt = cmd->base_masks & HIFN_BASE_CMD_CRYPT; + + base_cmd = (hifn_base_command_t *)buf_pos; + base_cmd->masks = htole16(cmd->base_masks); + slen = cmd->src_mapsize; + if (cmd->sloplen) + dlen = cmd->dst_mapsize - cmd->sloplen + sizeof(u_int32_t); + else + dlen = cmd->dst_mapsize; + base_cmd->total_source_count = htole16(slen & HIFN_BASE_CMD_LENMASK_LO); + base_cmd->total_dest_count = htole16(dlen & HIFN_BASE_CMD_LENMASK_LO); + dlen >>= 16; + slen >>= 16; + base_cmd->session_num = htole16( + ((slen << HIFN_BASE_CMD_SRCLEN_S) & HIFN_BASE_CMD_SRCLEN_M) | + ((dlen << HIFN_BASE_CMD_DSTLEN_S) & HIFN_BASE_CMD_DSTLEN_M)); + buf_pos += sizeof(hifn_base_command_t); + + if (using_mac) { + mac_cmd = (hifn_mac_command_t *)buf_pos; + dlen = cmd->maccrd->crd_len; + mac_cmd->source_count = htole16(dlen & 0xffff); + dlen >>= 16; + mac_cmd->masks = htole16(cmd->mac_masks | + ((dlen << HIFN_MAC_CMD_SRCLEN_S) & HIFN_MAC_CMD_SRCLEN_M)); + mac_cmd->header_skip = htole16(cmd->maccrd->crd_skip); + mac_cmd->reserved = 0; + buf_pos += sizeof(hifn_mac_command_t); + } + + if (using_crypt) { + cry_cmd = (hifn_crypt_command_t *)buf_pos; + dlen = cmd->enccrd->crd_len; + cry_cmd->source_count = htole16(dlen & 0xffff); + dlen >>= 16; + cry_cmd->masks = htole16(cmd->cry_masks | + ((dlen << HIFN_CRYPT_CMD_SRCLEN_S) & HIFN_CRYPT_CMD_SRCLEN_M)); + cry_cmd->header_skip = htole16(cmd->enccrd->crd_skip); + cry_cmd->reserved = 0; + buf_pos += sizeof(hifn_crypt_command_t); + } + + if (using_mac && cmd->mac_masks & HIFN_MAC_CMD_NEW_KEY) { + bcopy(cmd->mac, buf_pos, HIFN_MAC_KEY_LENGTH); + buf_pos += HIFN_MAC_KEY_LENGTH; + } + + if (using_crypt && cmd->cry_masks & HIFN_CRYPT_CMD_NEW_KEY) { + switch (cmd->cry_masks & HIFN_CRYPT_CMD_ALG_MASK) { + case HIFN_CRYPT_CMD_ALG_3DES: + bcopy(cmd->ck, buf_pos, HIFN_3DES_KEY_LENGTH); + buf_pos += HIFN_3DES_KEY_LENGTH; + break; + case HIFN_CRYPT_CMD_ALG_DES: + bcopy(cmd->ck, buf_pos, HIFN_DES_KEY_LENGTH); + buf_pos += HIFN_DES_KEY_LENGTH; + break; + case HIFN_CRYPT_CMD_ALG_RC4: + len = 256; + do { + int clen; + + clen = MIN(cmd->cklen, len); + bcopy(cmd->ck, buf_pos, clen); + len -= clen; + buf_pos += clen; + } while (len > 0); + bzero(buf_pos, 4); + buf_pos += 4; + break; + case HIFN_CRYPT_CMD_ALG_AES: + /* + * AES keys are variable 128, 192 and + * 256 bits (16, 24 and 32 bytes). + */ + bcopy(cmd->ck, buf_pos, cmd->cklen); + buf_pos += cmd->cklen; + break; + } + } + + if (using_crypt && cmd->cry_masks & HIFN_CRYPT_CMD_NEW_IV) { + switch (cmd->cry_masks & HIFN_CRYPT_CMD_ALG_MASK) { + case HIFN_CRYPT_CMD_ALG_AES: + ivlen = HIFN_AES_IV_LENGTH; + break; + default: + ivlen = HIFN_IV_LENGTH; + break; + } + bcopy(cmd->iv, buf_pos, ivlen); + buf_pos += ivlen; + } + + if ((cmd->base_masks & (HIFN_BASE_CMD_MAC|HIFN_BASE_CMD_CRYPT)) == 0) { + bzero(buf_pos, 8); + buf_pos += 8; + } + + return (buf_pos - buf); +} + +static int +hifn_dmamap_aligned(struct hifn_operand *op) +{ + struct hifn_softc *sc = NULL; + int i; + + DPRINTF("%s()\n", __FUNCTION__); + + for (i = 0; i < op->nsegs; i++) { + if (op->segs[i].ds_addr & 3) + return (0); + if ((i != (op->nsegs - 1)) && (op->segs[i].ds_len & 3)) + return (0); + } + return (1); +} + +static __inline int +hifn_dmamap_dstwrap(struct hifn_softc *sc, int idx) +{ + struct hifn_dma *dma = sc->sc_dma; + + if (++idx == HIFN_D_DST_RSIZE) { + dma->dstr[idx].l = htole32(HIFN_D_VALID | HIFN_D_JUMP | + HIFN_D_MASKDONEIRQ); + HIFN_DSTR_SYNC(sc, idx, + BUS_DMASYNC_PREREAD | BUS_DMASYNC_PREWRITE); + idx = 0; + } + return (idx); +} + +static int +hifn_dmamap_load_dst(struct hifn_softc *sc, struct hifn_command *cmd) +{ + struct hifn_dma *dma = sc->sc_dma; + struct hifn_operand *dst = &cmd->dst; + u_int32_t p, l; + int idx, used = 0, i; + + DPRINTF("%s()\n", __FUNCTION__); + + idx = dma->dsti; + for (i = 0; i < dst->nsegs - 1; i++) { + dma->dstr[idx].p = htole32(dst->segs[i].ds_addr); + dma->dstr[idx].l = htole32(HIFN_D_MASKDONEIRQ | dst->segs[i].ds_len); + wmb(); + dma->dstr[idx].l |= htole32(HIFN_D_VALID); + HIFN_DSTR_SYNC(sc, idx, + BUS_DMASYNC_PREREAD | BUS_DMASYNC_PREWRITE); + used++; + + idx = hifn_dmamap_dstwrap(sc, idx); + } + + if (cmd->sloplen == 0) { + p = dst->segs[i].ds_addr; + l = HIFN_D_MASKDONEIRQ | HIFN_D_LAST | + dst->segs[i].ds_len; + } else { + p = sc->sc_dma_physaddr + + offsetof(struct hifn_dma, slop[cmd->slopidx]); + l = HIFN_D_MASKDONEIRQ | HIFN_D_LAST | + sizeof(u_int32_t); + + if ((dst->segs[i].ds_len - cmd->sloplen) != 0) { + dma->dstr[idx].p = htole32(dst->segs[i].ds_addr); + dma->dstr[idx].l = htole32(HIFN_D_MASKDONEIRQ | + (dst->segs[i].ds_len - cmd->sloplen)); + wmb(); + dma->dstr[idx].l |= htole32(HIFN_D_VALID); + HIFN_DSTR_SYNC(sc, idx, + BUS_DMASYNC_PREREAD | BUS_DMASYNC_PREWRITE); + used++; + + idx = hifn_dmamap_dstwrap(sc, idx); + } + } + dma->dstr[idx].p = htole32(p); + dma->dstr[idx].l = htole32(l); + wmb(); + dma->dstr[idx].l |= htole32(HIFN_D_VALID); + HIFN_DSTR_SYNC(sc, idx, BUS_DMASYNC_PREREAD | BUS_DMASYNC_PREWRITE); + used++; + + idx = hifn_dmamap_dstwrap(sc, idx); + + dma->dsti = idx; + dma->dstu += used; + return (idx); +} + +static __inline int +hifn_dmamap_srcwrap(struct hifn_softc *sc, int idx) +{ + struct hifn_dma *dma = sc->sc_dma; + + if (++idx == HIFN_D_SRC_RSIZE) { + dma->srcr[idx].l = htole32(HIFN_D_VALID | + HIFN_D_JUMP | HIFN_D_MASKDONEIRQ); + HIFN_SRCR_SYNC(sc, HIFN_D_SRC_RSIZE, + BUS_DMASYNC_PREWRITE | BUS_DMASYNC_PREREAD); + idx = 0; + } + return (idx); +} + +static int +hifn_dmamap_load_src(struct hifn_softc *sc, struct hifn_command *cmd) +{ + struct hifn_dma *dma = sc->sc_dma; + struct hifn_operand *src = &cmd->src; + int idx, i; + u_int32_t last = 0; + + DPRINTF("%s()\n", __FUNCTION__); + + idx = dma->srci; + for (i = 0; i < src->nsegs; i++) { + if (i == src->nsegs - 1) + last = HIFN_D_LAST; + + dma->srcr[idx].p = htole32(src->segs[i].ds_addr); + dma->srcr[idx].l = htole32(src->segs[i].ds_len | + HIFN_D_MASKDONEIRQ | last); + wmb(); + dma->srcr[idx].l |= htole32(HIFN_D_VALID); + HIFN_SRCR_SYNC(sc, idx, + BUS_DMASYNC_PREWRITE | BUS_DMASYNC_PREREAD); + + idx = hifn_dmamap_srcwrap(sc, idx); + } + dma->srci = idx; + dma->srcu += src->nsegs; + return (idx); +} + + +static int +hifn_crypto( + struct hifn_softc *sc, + struct hifn_command *cmd, + struct cryptop *crp, + int hint) +{ + struct hifn_dma *dma = sc->sc_dma; + u_int32_t cmdlen, csr; + int cmdi, resi, err = 0; + unsigned long l_flags; + + DPRINTF("%s()\n", __FUNCTION__); + + /* + * need 1 cmd, and 1 res + * + * NB: check this first since it's easy. + */ + HIFN_LOCK(sc); + if ((dma->cmdu + 1) > HIFN_D_CMD_RSIZE || + (dma->resu + 1) > HIFN_D_RES_RSIZE) { +#ifdef HIFN_DEBUG + if (hifn_debug) { + device_printf(sc->sc_dev, + "cmd/result exhaustion, cmdu %u resu %u\n", + dma->cmdu, dma->resu); + } +#endif + hifnstats.hst_nomem_cr++; + sc->sc_needwakeup |= CRYPTO_SYMQ; + HIFN_UNLOCK(sc); + return (ERESTART); + } + + if (crp->crp_flags & CRYPTO_F_SKBUF) { + if (pci_map_skb(sc, &cmd->src, cmd->src_skb)) { + hifnstats.hst_nomem_load++; + err = ENOMEM; + goto err_srcmap1; + } + } else if (crp->crp_flags & CRYPTO_F_IOV) { + if (pci_map_uio(sc, &cmd->src, cmd->src_io)) { + hifnstats.hst_nomem_load++; + err = ENOMEM; + goto err_srcmap1; + } + } else { + if (pci_map_buf(sc, &cmd->src, cmd->src_buf, crp->crp_ilen)) { + hifnstats.hst_nomem_load++; + err = ENOMEM; + goto err_srcmap1; + } + } + + if (hifn_dmamap_aligned(&cmd->src)) { + cmd->sloplen = cmd->src_mapsize & 3; + cmd->dst = cmd->src; + } else { + if (crp->crp_flags & CRYPTO_F_IOV) { + DPRINTF("%s,%d: %s - EINVAL\n",__FILE__,__LINE__,__FUNCTION__); + err = EINVAL; + goto err_srcmap; + } else if (crp->crp_flags & CRYPTO_F_SKBUF) { +#ifdef NOTYET + int totlen, len; + struct mbuf *m, *m0, *mlast; + + KASSERT(cmd->dst_m == cmd->src_m, + ("hifn_crypto: dst_m initialized improperly")); + hifnstats.hst_unaligned++; + /* + * Source is not aligned on a longword boundary. + * Copy the data to insure alignment. If we fail + * to allocate mbufs or clusters while doing this + * we return ERESTART so the operation is requeued + * at the crypto later, but only if there are + * ops already posted to the hardware; otherwise we + * have no guarantee that we'll be re-entered. + */ + totlen = cmd->src_mapsize; + if (cmd->src_m->m_flags & M_PKTHDR) { + len = MHLEN; + MGETHDR(m0, M_DONTWAIT, MT_DATA); + if (m0 && !m_dup_pkthdr(m0, cmd->src_m, M_DONTWAIT)) { + m_free(m0); + m0 = NULL; + } + } else { + len = MLEN; + MGET(m0, M_DONTWAIT, MT_DATA); + } + if (m0 == NULL) { + hifnstats.hst_nomem_mbuf++; + err = dma->cmdu ? ERESTART : ENOMEM; + goto err_srcmap; + } + if (totlen >= MINCLSIZE) { + MCLGET(m0, M_DONTWAIT); + if ((m0->m_flags & M_EXT) == 0) { + hifnstats.hst_nomem_mcl++; + err = dma->cmdu ? ERESTART : ENOMEM; + m_freem(m0); + goto err_srcmap; + } + len = MCLBYTES; + } + totlen -= len; + m0->m_pkthdr.len = m0->m_len = len; + mlast = m0; + + while (totlen > 0) { + MGET(m, M_DONTWAIT, MT_DATA); + if (m == NULL) { + hifnstats.hst_nomem_mbuf++; + err = dma->cmdu ? ERESTART : ENOMEM; + m_freem(m0); + goto err_srcmap; + } + len = MLEN; + if (totlen >= MINCLSIZE) { + MCLGET(m, M_DONTWAIT); + if ((m->m_flags & M_EXT) == 0) { + hifnstats.hst_nomem_mcl++; + err = dma->cmdu ? ERESTART : ENOMEM; + mlast->m_next = m; + m_freem(m0); + goto err_srcmap; + } + len = MCLBYTES; + } + + m->m_len = len; + m0->m_pkthdr.len += len; + totlen -= len; + + mlast->m_next = m; + mlast = m; + } + cmd->dst_m = m0; +#else + device_printf(sc->sc_dev, + "%s,%d: CRYPTO_F_SKBUF unaligned not implemented\n", + __FILE__, __LINE__); + err = EINVAL; + goto err_srcmap; +#endif + } else { + device_printf(sc->sc_dev, + "%s,%d: unaligned contig buffers not implemented\n", + __FILE__, __LINE__); + err = EINVAL; + goto err_srcmap; + } + } + + if (cmd->dst_map == NULL) { + if (crp->crp_flags & CRYPTO_F_SKBUF) { + if (pci_map_skb(sc, &cmd->dst, cmd->dst_skb)) { + hifnstats.hst_nomem_map++; + err = ENOMEM; + goto err_dstmap1; + } + } else if (crp->crp_flags & CRYPTO_F_IOV) { + if (pci_map_uio(sc, &cmd->dst, cmd->dst_io)) { + hifnstats.hst_nomem_load++; + err = ENOMEM; + goto err_dstmap1; + } + } else { + if (pci_map_buf(sc, &cmd->dst, cmd->dst_buf, crp->crp_ilen)) { + hifnstats.hst_nomem_load++; + err = ENOMEM; + goto err_dstmap1; + } + } + } + +#ifdef HIFN_DEBUG + if (hifn_debug) { + device_printf(sc->sc_dev, + "Entering cmd: stat %8x ien %8x u %d/%d/%d/%d n %d/%d\n", + READ_REG_1(sc, HIFN_1_DMA_CSR), + READ_REG_1(sc, HIFN_1_DMA_IER), + dma->cmdu, dma->srcu, dma->dstu, dma->resu, + cmd->src_nsegs, cmd->dst_nsegs); + } +#endif + +#if 0 + if (cmd->src_map == cmd->dst_map) { + bus_dmamap_sync(sc->sc_dmat, cmd->src_map, + BUS_DMASYNC_PREWRITE|BUS_DMASYNC_PREREAD); + } else { + bus_dmamap_sync(sc->sc_dmat, cmd->src_map, + BUS_DMASYNC_PREWRITE); + bus_dmamap_sync(sc->sc_dmat, cmd->dst_map, + BUS_DMASYNC_PREREAD); + } +#endif + + /* + * need N src, and N dst + */ + if ((dma->srcu + cmd->src_nsegs) > HIFN_D_SRC_RSIZE || + (dma->dstu + cmd->dst_nsegs + 1) > HIFN_D_DST_RSIZE) { +#ifdef HIFN_DEBUG + if (hifn_debug) { + device_printf(sc->sc_dev, + "src/dst exhaustion, srcu %u+%u dstu %u+%u\n", + dma->srcu, cmd->src_nsegs, + dma->dstu, cmd->dst_nsegs); + } +#endif + hifnstats.hst_nomem_sd++; + err = ERESTART; + goto err_dstmap; + } + + if (dma->cmdi == HIFN_D_CMD_RSIZE) { + dma->cmdi = 0; + dma->cmdr[HIFN_D_CMD_RSIZE].l = htole32(HIFN_D_JUMP|HIFN_D_MASKDONEIRQ); + wmb(); + dma->cmdr[HIFN_D_CMD_RSIZE].l |= htole32(HIFN_D_VALID); + HIFN_CMDR_SYNC(sc, HIFN_D_CMD_RSIZE, + BUS_DMASYNC_PREWRITE | BUS_DMASYNC_PREREAD); + } + cmdi = dma->cmdi++; + cmdlen = hifn_write_command(cmd, dma->command_bufs[cmdi]); + HIFN_CMD_SYNC(sc, cmdi, BUS_DMASYNC_PREWRITE); + + /* .p for command/result already set */ + dma->cmdr[cmdi].l = htole32(cmdlen | HIFN_D_LAST | + HIFN_D_MASKDONEIRQ); + wmb(); + dma->cmdr[cmdi].l |= htole32(HIFN_D_VALID); + HIFN_CMDR_SYNC(sc, cmdi, + BUS_DMASYNC_PREWRITE | BUS_DMASYNC_PREREAD); + dma->cmdu++; + + /* + * We don't worry about missing an interrupt (which a "command wait" + * interrupt salvages us from), unless there is more than one command + * in the queue. + */ + if (dma->cmdu > 1) { + sc->sc_dmaier |= HIFN_DMAIER_C_WAIT; + WRITE_REG_1(sc, HIFN_1_DMA_IER, sc->sc_dmaier); + } + + hifnstats.hst_ipackets++; + hifnstats.hst_ibytes += cmd->src_mapsize; + + hifn_dmamap_load_src(sc, cmd); + + /* + * Unlike other descriptors, we don't mask done interrupt from + * result descriptor. + */ +#ifdef HIFN_DEBUG + if (hifn_debug) + device_printf(sc->sc_dev, "load res\n"); +#endif + if (dma->resi == HIFN_D_RES_RSIZE) { + dma->resi = 0; + dma->resr[HIFN_D_RES_RSIZE].l = htole32(HIFN_D_JUMP|HIFN_D_MASKDONEIRQ); + wmb(); + dma->resr[HIFN_D_RES_RSIZE].l |= htole32(HIFN_D_VALID); + HIFN_RESR_SYNC(sc, HIFN_D_RES_RSIZE, + BUS_DMASYNC_PREREAD | BUS_DMASYNC_PREWRITE); + } + resi = dma->resi++; + KASSERT(dma->hifn_commands[resi] == NULL, + ("hifn_crypto: command slot %u busy", resi)); + dma->hifn_commands[resi] = cmd; + HIFN_RES_SYNC(sc, resi, BUS_DMASYNC_PREREAD); + if ((hint & CRYPTO_HINT_MORE) && sc->sc_curbatch < hifn_maxbatch) { + dma->resr[resi].l = htole32(HIFN_MAX_RESULT | + HIFN_D_LAST | HIFN_D_MASKDONEIRQ); + wmb(); + dma->resr[resi].l |= htole32(HIFN_D_VALID); + sc->sc_curbatch++; + if (sc->sc_curbatch > hifnstats.hst_maxbatch) + hifnstats.hst_maxbatch = sc->sc_curbatch; + hifnstats.hst_totbatch++; + } else { + dma->resr[resi].l = htole32(HIFN_MAX_RESULT | HIFN_D_LAST); + wmb(); + dma->resr[resi].l |= htole32(HIFN_D_VALID); + sc->sc_curbatch = 0; + } + HIFN_RESR_SYNC(sc, resi, + BUS_DMASYNC_PREREAD | BUS_DMASYNC_PREWRITE); + dma->resu++; + + if (cmd->sloplen) + cmd->slopidx = resi; + + hifn_dmamap_load_dst(sc, cmd); + + csr = 0; + if (sc->sc_c_busy == 0) { + csr |= HIFN_DMACSR_C_CTRL_ENA; + sc->sc_c_busy = 1; + } + if (sc->sc_s_busy == 0) { + csr |= HIFN_DMACSR_S_CTRL_ENA; + sc->sc_s_busy = 1; + } + if (sc->sc_r_busy == 0) { + csr |= HIFN_DMACSR_R_CTRL_ENA; + sc->sc_r_busy = 1; + } + if (sc->sc_d_busy == 0) { + csr |= HIFN_DMACSR_D_CTRL_ENA; + sc->sc_d_busy = 1; + } + if (csr) + WRITE_REG_1(sc, HIFN_1_DMA_CSR, csr); + +#ifdef HIFN_DEBUG + if (hifn_debug) { + device_printf(sc->sc_dev, "command: stat %8x ier %8x\n", + READ_REG_1(sc, HIFN_1_DMA_CSR), + READ_REG_1(sc, HIFN_1_DMA_IER)); + } +#endif + + sc->sc_active = 5; + HIFN_UNLOCK(sc); + KASSERT(err == 0, ("hifn_crypto: success with error %u", err)); + return (err); /* success */ + +err_dstmap: + if (cmd->src_map != cmd->dst_map) + pci_unmap_buf(sc, &cmd->dst); +err_dstmap1: +err_srcmap: + if (crp->crp_flags & CRYPTO_F_SKBUF) { + if (cmd->src_skb != cmd->dst_skb) +#ifdef NOTYET + m_freem(cmd->dst_m); +#else + device_printf(sc->sc_dev, + "%s,%d: CRYPTO_F_SKBUF src != dst not implemented\n", + __FILE__, __LINE__); +#endif + } + pci_unmap_buf(sc, &cmd->src); +err_srcmap1: + HIFN_UNLOCK(sc); + return (err); +} + +static void +hifn_tick(unsigned long arg) +{ + struct hifn_softc *sc; + unsigned long l_flags; + + if (arg >= HIFN_MAX_CHIPS) + return; + sc = hifn_chip_idx[arg]; + if (!sc) + return; + + HIFN_LOCK(sc); + if (sc->sc_active == 0) { + struct hifn_dma *dma = sc->sc_dma; + u_int32_t r = 0; + + if (dma->cmdu == 0 && sc->sc_c_busy) { + sc->sc_c_busy = 0; + r |= HIFN_DMACSR_C_CTRL_DIS; + } + if (dma->srcu == 0 && sc->sc_s_busy) { + sc->sc_s_busy = 0; + r |= HIFN_DMACSR_S_CTRL_DIS; + } + if (dma->dstu == 0 && sc->sc_d_busy) { + sc->sc_d_busy = 0; + r |= HIFN_DMACSR_D_CTRL_DIS; + } + if (dma->resu == 0 && sc->sc_r_busy) { + sc->sc_r_busy = 0; + r |= HIFN_DMACSR_R_CTRL_DIS; + } + if (r) + WRITE_REG_1(sc, HIFN_1_DMA_CSR, r); + } else + sc->sc_active--; + HIFN_UNLOCK(sc); + mod_timer(&sc->sc_tickto, jiffies + HZ); +} + +static irqreturn_t +#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,19) +hifn_intr(int irq, void *arg) +#else +hifn_intr(int irq, void *arg, struct pt_regs *regs) +#endif +{ + struct hifn_softc *sc = arg; + struct hifn_dma *dma; + u_int32_t dmacsr, restart; + int i, u; + unsigned long l_flags; + + dmacsr = READ_REG_1(sc, HIFN_1_DMA_CSR); + + /* Nothing in the DMA unit interrupted */ + if ((dmacsr & sc->sc_dmaier) == 0) + return IRQ_NONE; + + HIFN_LOCK(sc); + + dma = sc->sc_dma; + +#ifdef HIFN_DEBUG + if (hifn_debug) { + device_printf(sc->sc_dev, + "irq: stat %08x ien %08x damier %08x i %d/%d/%d/%d k %d/%d/%d/%d u %d/%d/%d/%d\n", + dmacsr, READ_REG_1(sc, HIFN_1_DMA_IER), sc->sc_dmaier, + dma->cmdi, dma->srci, dma->dsti, dma->resi, + dma->cmdk, dma->srck, dma->dstk, dma->resk, + dma->cmdu, dma->srcu, dma->dstu, dma->resu); + } +#endif + + WRITE_REG_1(sc, HIFN_1_DMA_CSR, dmacsr & sc->sc_dmaier); + + if ((sc->sc_flags & HIFN_HAS_PUBLIC) && + (dmacsr & HIFN_DMACSR_PUBDONE)) + WRITE_REG_1(sc, HIFN_1_PUB_STATUS, + READ_REG_1(sc, HIFN_1_PUB_STATUS) | HIFN_PUBSTS_DONE); + + restart = dmacsr & (HIFN_DMACSR_D_OVER | HIFN_DMACSR_R_OVER); + if (restart) + device_printf(sc->sc_dev, "overrun %x\n", dmacsr); + + if (sc->sc_flags & HIFN_IS_7811) { + if (dmacsr & HIFN_DMACSR_ILLR) + device_printf(sc->sc_dev, "illegal read\n"); + if (dmacsr & HIFN_DMACSR_ILLW) + device_printf(sc->sc_dev, "illegal write\n"); + } + + restart = dmacsr & (HIFN_DMACSR_C_ABORT | HIFN_DMACSR_S_ABORT | + HIFN_DMACSR_D_ABORT | HIFN_DMACSR_R_ABORT); + if (restart) { + device_printf(sc->sc_dev, "abort, resetting.\n"); + hifnstats.hst_abort++; + hifn_abort(sc); + HIFN_UNLOCK(sc); + return IRQ_HANDLED; + } + + if ((dmacsr & HIFN_DMACSR_C_WAIT) && (dma->cmdu == 0)) { + /* + * If no slots to process and we receive a "waiting on + * command" interrupt, we disable the "waiting on command" + * (by clearing it). + */ + sc->sc_dmaier &= ~HIFN_DMAIER_C_WAIT; + WRITE_REG_1(sc, HIFN_1_DMA_IER, sc->sc_dmaier); + } + + /* clear the rings */ + i = dma->resk; u = dma->resu; + while (u != 0) { + HIFN_RESR_SYNC(sc, i, + BUS_DMASYNC_POSTREAD | BUS_DMASYNC_POSTWRITE); + if (dma->resr[i].l & htole32(HIFN_D_VALID)) { + HIFN_RESR_SYNC(sc, i, + BUS_DMASYNC_PREREAD | BUS_DMASYNC_PREWRITE); + break; + } + + if (i != HIFN_D_RES_RSIZE) { + struct hifn_command *cmd; + u_int8_t *macbuf = NULL; + + HIFN_RES_SYNC(sc, i, BUS_DMASYNC_POSTREAD); + cmd = dma->hifn_commands[i]; + KASSERT(cmd != NULL, + ("hifn_intr: null command slot %u", i)); + dma->hifn_commands[i] = NULL; + + if (cmd->base_masks & HIFN_BASE_CMD_MAC) { + macbuf = dma->result_bufs[i]; + macbuf += 12; + } + + hifn_callback(sc, cmd, macbuf); + hifnstats.hst_opackets++; + u--; + } + + if (++i == (HIFN_D_RES_RSIZE + 1)) + i = 0; + } + dma->resk = i; dma->resu = u; + + i = dma->srck; u = dma->srcu; + while (u != 0) { + if (i == HIFN_D_SRC_RSIZE) + i = 0; + HIFN_SRCR_SYNC(sc, i, + BUS_DMASYNC_POSTREAD | BUS_DMASYNC_POSTWRITE); + if (dma->srcr[i].l & htole32(HIFN_D_VALID)) { + HIFN_SRCR_SYNC(sc, i, + BUS_DMASYNC_PREREAD | BUS_DMASYNC_PREWRITE); + break; + } + i++, u--; + } + dma->srck = i; dma->srcu = u; + + i = dma->cmdk; u = dma->cmdu; + while (u != 0) { + HIFN_CMDR_SYNC(sc, i, + BUS_DMASYNC_POSTREAD | BUS_DMASYNC_POSTWRITE); + if (dma->cmdr[i].l & htole32(HIFN_D_VALID)) { + HIFN_CMDR_SYNC(sc, i, + BUS_DMASYNC_PREREAD | BUS_DMASYNC_PREWRITE); + break; + } + if (i != HIFN_D_CMD_RSIZE) { + u--; + HIFN_CMD_SYNC(sc, i, BUS_DMASYNC_POSTWRITE); + } + if (++i == (HIFN_D_CMD_RSIZE + 1)) + i = 0; + } + dma->cmdk = i; dma->cmdu = u; + + HIFN_UNLOCK(sc); + + if (sc->sc_needwakeup) { /* XXX check high watermark */ + int wakeup = sc->sc_needwakeup & (CRYPTO_SYMQ|CRYPTO_ASYMQ); +#ifdef HIFN_DEBUG + if (hifn_debug) + device_printf(sc->sc_dev, + "wakeup crypto (%x) u %d/%d/%d/%d\n", + sc->sc_needwakeup, + dma->cmdu, dma->srcu, dma->dstu, dma->resu); +#endif + sc->sc_needwakeup &= ~wakeup; + crypto_unblock(sc->sc_cid, wakeup); + } + + return IRQ_HANDLED; +} + +/* + * Allocate a new 'session' and return an encoded session id. 'sidp' + * contains our registration id, and should contain an encoded session + * id on successful allocation. + */ +static int +hifn_newsession(device_t dev, u_int32_t *sidp, struct cryptoini *cri) +{ + struct hifn_softc *sc = device_get_softc(dev); + struct cryptoini *c; + int mac = 0, cry = 0, sesn; + struct hifn_session *ses = NULL; + unsigned long l_flags; + + DPRINTF("%s()\n", __FUNCTION__); + + KASSERT(sc != NULL, ("hifn_newsession: null softc")); + if (sidp == NULL || cri == NULL || sc == NULL) { + DPRINTF("%s,%d: %s - EINVAL\n", __FILE__, __LINE__, __FUNCTION__); + return (EINVAL); + } + + HIFN_LOCK(sc); + if (sc->sc_sessions == NULL) { + ses = sc->sc_sessions = (struct hifn_session *)kmalloc(sizeof(*ses), + SLAB_ATOMIC); + if (ses == NULL) { + HIFN_UNLOCK(sc); + return (ENOMEM); + } + sesn = 0; + sc->sc_nsessions = 1; + } else { + for (sesn = 0; sesn < sc->sc_nsessions; sesn++) { + if (!sc->sc_sessions[sesn].hs_used) { + ses = &sc->sc_sessions[sesn]; + break; + } + } + + if (ses == NULL) { + sesn = sc->sc_nsessions; + ses = (struct hifn_session *)kmalloc((sesn + 1) * sizeof(*ses), + SLAB_ATOMIC); + if (ses == NULL) { + HIFN_UNLOCK(sc); + return (ENOMEM); + } + bcopy(sc->sc_sessions, ses, sesn * sizeof(*ses)); + bzero(sc->sc_sessions, sesn * sizeof(*ses)); + kfree(sc->sc_sessions); + sc->sc_sessions = ses; + ses = &sc->sc_sessions[sesn]; + sc->sc_nsessions++; + } + } + HIFN_UNLOCK(sc); + + bzero(ses, sizeof(*ses)); + ses->hs_used = 1; + + for (c = cri; c != NULL; c = c->cri_next) { + switch (c->cri_alg) { + case CRYPTO_MD5: + case CRYPTO_SHA1: + case CRYPTO_MD5_HMAC: + case CRYPTO_SHA1_HMAC: + if (mac) { + DPRINTF("%s,%d: %s - EINVAL\n",__FILE__,__LINE__,__FUNCTION__); + return (EINVAL); + } + mac = 1; + ses->hs_mlen = c->cri_mlen; + if (ses->hs_mlen == 0) { + switch (c->cri_alg) { + case CRYPTO_MD5: + case CRYPTO_MD5_HMAC: + ses->hs_mlen = 16; + break; + case CRYPTO_SHA1: + case CRYPTO_SHA1_HMAC: + ses->hs_mlen = 20; + break; + } + } + break; + case CRYPTO_DES_CBC: + case CRYPTO_3DES_CBC: + case CRYPTO_AES_CBC: + /* XXX this may read fewer, does it matter? */ + read_random(ses->hs_iv, + c->cri_alg == CRYPTO_AES_CBC ? + HIFN_AES_IV_LENGTH : HIFN_IV_LENGTH); + /*FALLTHROUGH*/ + case CRYPTO_ARC4: + if (cry) { + DPRINTF("%s,%d: %s - EINVAL\n",__FILE__,__LINE__,__FUNCTION__); + return (EINVAL); + } + cry = 1; + break; + default: + DPRINTF("%s,%d: %s - EINVAL\n",__FILE__,__LINE__,__FUNCTION__); + return (EINVAL); + } + } + if (mac == 0 && cry == 0) { + DPRINTF("%s,%d: %s - EINVAL\n",__FILE__,__LINE__,__FUNCTION__); + return (EINVAL); + } + + *sidp = HIFN_SID(device_get_unit(sc->sc_dev), sesn); + + return (0); +} + +/* + * Deallocate a session. + * XXX this routine should run a zero'd mac/encrypt key into context ram. + * XXX to blow away any keys already stored there. + */ +static int +hifn_freesession(device_t dev, u_int64_t tid) +{ + struct hifn_softc *sc = device_get_softc(dev); + int session, error; + u_int32_t sid = CRYPTO_SESID2LID(tid); + unsigned long l_flags; + + DPRINTF("%s()\n", __FUNCTION__); + + KASSERT(sc != NULL, ("hifn_freesession: null softc")); + if (sc == NULL) { + DPRINTF("%s,%d: %s - EINVAL\n",__FILE__,__LINE__,__FUNCTION__); + return (EINVAL); + } + + HIFN_LOCK(sc); + session = HIFN_SESSION(sid); + if (session < sc->sc_nsessions) { + bzero(&sc->sc_sessions[session], sizeof(struct hifn_session)); + error = 0; + } else { + DPRINTF("%s,%d: %s - EINVAL\n",__FILE__,__LINE__,__FUNCTION__); + error = EINVAL; + } + HIFN_UNLOCK(sc); + + return (error); +} + +static int +hifn_process(device_t dev, struct cryptop *crp, int hint) +{ + struct hifn_softc *sc = device_get_softc(dev); + struct hifn_command *cmd = NULL; + int session, err, ivlen; + struct cryptodesc *crd1, *crd2, *maccrd, *enccrd; + + DPRINTF("%s()\n", __FUNCTION__); + + if (crp == NULL || crp->crp_callback == NULL) { + hifnstats.hst_invalid++; + DPRINTF("%s,%d: %s - EINVAL\n",__FILE__,__LINE__,__FUNCTION__); + return (EINVAL); + } + session = HIFN_SESSION(crp->crp_sid); + + if (sc == NULL || session >= sc->sc_nsessions) { + DPRINTF("%s,%d: %s - EINVAL\n",__FILE__,__LINE__,__FUNCTION__); + err = EINVAL; + goto errout; + } + + cmd = kmalloc(sizeof(struct hifn_command), SLAB_ATOMIC); + if (cmd == NULL) { + hifnstats.hst_nomem++; + err = ENOMEM; + goto errout; + } + memset(cmd, 0, sizeof(*cmd)); + + if (crp->crp_flags & CRYPTO_F_SKBUF) { + cmd->src_skb = (struct sk_buff *)crp->crp_buf; + cmd->dst_skb = (struct sk_buff *)crp->crp_buf; + } else if (crp->crp_flags & CRYPTO_F_IOV) { + cmd->src_io = (struct uio *)crp->crp_buf; + cmd->dst_io = (struct uio *)crp->crp_buf; + } else { + cmd->src_buf = crp->crp_buf; + cmd->dst_buf = crp->crp_buf; + } + + crd1 = crp->crp_desc; + if (crd1 == NULL) { + DPRINTF("%s,%d: %s - EINVAL\n",__FILE__,__LINE__,__FUNCTION__); + err = EINVAL; + goto errout; + } + crd2 = crd1->crd_next; + + if (crd2 == NULL) { + if (crd1->crd_alg == CRYPTO_MD5_HMAC || + crd1->crd_alg == CRYPTO_SHA1_HMAC || + crd1->crd_alg == CRYPTO_SHA1 || + crd1->crd_alg == CRYPTO_MD5) { + maccrd = crd1; + enccrd = NULL; + } else if (crd1->crd_alg == CRYPTO_DES_CBC || + crd1->crd_alg == CRYPTO_3DES_CBC || + crd1->crd_alg == CRYPTO_AES_CBC || + crd1->crd_alg == CRYPTO_ARC4) { + if ((crd1->crd_flags & CRD_F_ENCRYPT) == 0) + cmd->base_masks |= HIFN_BASE_CMD_DECODE; + maccrd = NULL; + enccrd = crd1; + } else { + DPRINTF("%s,%d: %s - EINVAL\n",__FILE__,__LINE__,__FUNCTION__); + err = EINVAL; + goto errout; + } + } else { + if ((crd1->crd_alg == CRYPTO_MD5_HMAC || + crd1->crd_alg == CRYPTO_SHA1_HMAC || + crd1->crd_alg == CRYPTO_MD5 || + crd1->crd_alg == CRYPTO_SHA1) && + (crd2->crd_alg == CRYPTO_DES_CBC || + crd2->crd_alg == CRYPTO_3DES_CBC || + crd2->crd_alg == CRYPTO_AES_CBC || + crd2->crd_alg == CRYPTO_ARC4) && + ((crd2->crd_flags & CRD_F_ENCRYPT) == 0)) { + cmd->base_masks = HIFN_BASE_CMD_DECODE; + maccrd = crd1; + enccrd = crd2; + } else if ((crd1->crd_alg == CRYPTO_DES_CBC || + crd1->crd_alg == CRYPTO_ARC4 || + crd1->crd_alg == CRYPTO_3DES_CBC || + crd1->crd_alg == CRYPTO_AES_CBC) && + (crd2->crd_alg == CRYPTO_MD5_HMAC || + crd2->crd_alg == CRYPTO_SHA1_HMAC || + crd2->crd_alg == CRYPTO_MD5 || + crd2->crd_alg == CRYPTO_SHA1) && + (crd1->crd_flags & CRD_F_ENCRYPT)) { + enccrd = crd1; + maccrd = crd2; + } else { + /* + * We cannot order the 7751 as requested + */ + DPRINTF("%s,%d: %s %d,%d,%d - EINVAL\n",__FILE__,__LINE__,__FUNCTION__, crd1->crd_alg, crd2->crd_alg, crd1->crd_flags & CRD_F_ENCRYPT); + err = EINVAL; + goto errout; + } + } + + if (enccrd) { + cmd->enccrd = enccrd; + cmd->base_masks |= HIFN_BASE_CMD_CRYPT; + switch (enccrd->crd_alg) { + case CRYPTO_ARC4: + cmd->cry_masks |= HIFN_CRYPT_CMD_ALG_RC4; + break; + case CRYPTO_DES_CBC: + cmd->cry_masks |= HIFN_CRYPT_CMD_ALG_DES | + HIFN_CRYPT_CMD_MODE_CBC | + HIFN_CRYPT_CMD_NEW_IV; + break; + case CRYPTO_3DES_CBC: + cmd->cry_masks |= HIFN_CRYPT_CMD_ALG_3DES | + HIFN_CRYPT_CMD_MODE_CBC | + HIFN_CRYPT_CMD_NEW_IV; + break; + case CRYPTO_AES_CBC: + cmd->cry_masks |= HIFN_CRYPT_CMD_ALG_AES | + HIFN_CRYPT_CMD_MODE_CBC | + HIFN_CRYPT_CMD_NEW_IV; + break; + default: + DPRINTF("%s,%d: %s - EINVAL\n",__FILE__,__LINE__,__FUNCTION__); + err = EINVAL; + goto errout; + } + if (enccrd->crd_alg != CRYPTO_ARC4) { + ivlen = ((enccrd->crd_alg == CRYPTO_AES_CBC) ? + HIFN_AES_IV_LENGTH : HIFN_IV_LENGTH); + if (enccrd->crd_flags & CRD_F_ENCRYPT) { + if (enccrd->crd_flags & CRD_F_IV_EXPLICIT) + bcopy(enccrd->crd_iv, cmd->iv, ivlen); + else + bcopy(sc->sc_sessions[session].hs_iv, + cmd->iv, ivlen); + + if ((enccrd->crd_flags & CRD_F_IV_PRESENT) + == 0) { + crypto_copyback(crp->crp_flags, + crp->crp_buf, enccrd->crd_inject, + ivlen, cmd->iv); + } + } else { + if (enccrd->crd_flags & CRD_F_IV_EXPLICIT) + bcopy(enccrd->crd_iv, cmd->iv, ivlen); + else { + crypto_copydata(crp->crp_flags, + crp->crp_buf, enccrd->crd_inject, + ivlen, cmd->iv); + } + } + } + + if (enccrd->crd_flags & CRD_F_KEY_EXPLICIT) + cmd->cry_masks |= HIFN_CRYPT_CMD_NEW_KEY; + cmd->ck = enccrd->crd_key; + cmd->cklen = enccrd->crd_klen >> 3; + cmd->cry_masks |= HIFN_CRYPT_CMD_NEW_KEY; + + /* + * Need to specify the size for the AES key in the masks. + */ + if ((cmd->cry_masks & HIFN_CRYPT_CMD_ALG_MASK) == + HIFN_CRYPT_CMD_ALG_AES) { + switch (cmd->cklen) { + case 16: + cmd->cry_masks |= HIFN_CRYPT_CMD_KSZ_128; + break; + case 24: + cmd->cry_masks |= HIFN_CRYPT_CMD_KSZ_192; + break; + case 32: + cmd->cry_masks |= HIFN_CRYPT_CMD_KSZ_256; + break; + default: + DPRINTF("%s,%d: %s - EINVAL\n",__FILE__,__LINE__,__FUNCTION__); + err = EINVAL; + goto errout; + } + } + } + + if (maccrd) { + cmd->maccrd = maccrd; + cmd->base_masks |= HIFN_BASE_CMD_MAC; + + switch (maccrd->crd_alg) { + case CRYPTO_MD5: + cmd->mac_masks |= HIFN_MAC_CMD_ALG_MD5 | + HIFN_MAC_CMD_RESULT | HIFN_MAC_CMD_MODE_HASH | + HIFN_MAC_CMD_POS_IPSEC; + break; + case CRYPTO_MD5_HMAC: + cmd->mac_masks |= HIFN_MAC_CMD_ALG_MD5 | + HIFN_MAC_CMD_RESULT | HIFN_MAC_CMD_MODE_HMAC | + HIFN_MAC_CMD_POS_IPSEC | HIFN_MAC_CMD_TRUNC; + break; + case CRYPTO_SHA1: + cmd->mac_masks |= HIFN_MAC_CMD_ALG_SHA1 | + HIFN_MAC_CMD_RESULT | HIFN_MAC_CMD_MODE_HASH | + HIFN_MAC_CMD_POS_IPSEC; + break; + case CRYPTO_SHA1_HMAC: + cmd->mac_masks |= HIFN_MAC_CMD_ALG_SHA1 | + HIFN_MAC_CMD_RESULT | HIFN_MAC_CMD_MODE_HMAC | + HIFN_MAC_CMD_POS_IPSEC | HIFN_MAC_CMD_TRUNC; + break; + } + + if (maccrd->crd_alg == CRYPTO_SHA1_HMAC || + maccrd->crd_alg == CRYPTO_MD5_HMAC) { + cmd->mac_masks |= HIFN_MAC_CMD_NEW_KEY; + bcopy(maccrd->crd_key, cmd->mac, maccrd->crd_klen >> 3); + bzero(cmd->mac + (maccrd->crd_klen >> 3), + HIFN_MAC_KEY_LENGTH - (maccrd->crd_klen >> 3)); + } + } + + cmd->crp = crp; + cmd->session_num = session; + cmd->softc = sc; + + err = hifn_crypto(sc, cmd, crp, hint); + if (!err) { + return 0; + } else if (err == ERESTART) { + /* + * There weren't enough resources to dispatch the request + * to the part. Notify the caller so they'll requeue this + * request and resubmit it again soon. + */ +#ifdef HIFN_DEBUG + if (hifn_debug) + device_printf(sc->sc_dev, "requeue request\n"); +#endif + kfree(cmd); + sc->sc_needwakeup |= CRYPTO_SYMQ; + return (err); + } + +errout: + if (cmd != NULL) + kfree(cmd); + if (err == EINVAL) + hifnstats.hst_invalid++; + else + hifnstats.hst_nomem++; + crp->crp_etype = err; + crypto_done(crp); + return (err); +} + +static void +hifn_abort(struct hifn_softc *sc) +{ + struct hifn_dma *dma = sc->sc_dma; + struct hifn_command *cmd; + struct cryptop *crp; + int i, u; + + DPRINTF("%s()\n", __FUNCTION__); + + i = dma->resk; u = dma->resu; + while (u != 0) { + cmd = dma->hifn_commands[i]; + KASSERT(cmd != NULL, ("hifn_abort: null command slot %u", i)); + dma->hifn_commands[i] = NULL; + crp = cmd->crp; + + if ((dma->resr[i].l & htole32(HIFN_D_VALID)) == 0) { + /* Salvage what we can. */ + u_int8_t *macbuf; + + if (cmd->base_masks & HIFN_BASE_CMD_MAC) { + macbuf = dma->result_bufs[i]; + macbuf += 12; + } else + macbuf = NULL; + hifnstats.hst_opackets++; + hifn_callback(sc, cmd, macbuf); + } else { +#if 0 + if (cmd->src_map == cmd->dst_map) { + bus_dmamap_sync(sc->sc_dmat, cmd->src_map, + BUS_DMASYNC_POSTREAD|BUS_DMASYNC_POSTWRITE); + } else { + bus_dmamap_sync(sc->sc_dmat, cmd->src_map, + BUS_DMASYNC_POSTWRITE); + bus_dmamap_sync(sc->sc_dmat, cmd->dst_map, + BUS_DMASYNC_POSTREAD); + } +#endif + + if (cmd->src_skb != cmd->dst_skb) { +#ifdef NOTYET + m_freem(cmd->src_m); + crp->crp_buf = (caddr_t)cmd->dst_m; +#else + device_printf(sc->sc_dev, + "%s,%d: CRYPTO_F_SKBUF src != dst not implemented\n", + __FILE__, __LINE__); +#endif + } + + /* non-shared buffers cannot be restarted */ + if (cmd->src_map != cmd->dst_map) { + /* + * XXX should be EAGAIN, delayed until + * after the reset. + */ + crp->crp_etype = ENOMEM; + pci_unmap_buf(sc, &cmd->dst); + } else + crp->crp_etype = ENOMEM; + + pci_unmap_buf(sc, &cmd->src); + + kfree(cmd); + if (crp->crp_etype != EAGAIN) + crypto_done(crp); + } + + if (++i == HIFN_D_RES_RSIZE) + i = 0; + u--; + } + dma->resk = i; dma->resu = u; + + hifn_reset_board(sc, 1); + hifn_init_dma(sc); + hifn_init_pci_registers(sc); +} + +static void +hifn_callback(struct hifn_softc *sc, struct hifn_command *cmd, u_int8_t *macbuf) +{ + struct hifn_dma *dma = sc->sc_dma; + struct cryptop *crp = cmd->crp; + struct cryptodesc *crd; + int i, u, ivlen; + + DPRINTF("%s()\n", __FUNCTION__); + +#if 0 + if (cmd->src_map == cmd->dst_map) { + bus_dmamap_sync(sc->sc_dmat, cmd->src_map, + BUS_DMASYNC_POSTWRITE | BUS_DMASYNC_POSTREAD); + } else { + bus_dmamap_sync(sc->sc_dmat, cmd->src_map, + BUS_DMASYNC_POSTWRITE); + bus_dmamap_sync(sc->sc_dmat, cmd->dst_map, + BUS_DMASYNC_POSTREAD); + } +#endif + + if (crp->crp_flags & CRYPTO_F_SKBUF) { + if (cmd->src_skb != cmd->dst_skb) { +#ifdef NOTYET + crp->crp_buf = (caddr_t)cmd->dst_m; + totlen = cmd->src_mapsize; + for (m = cmd->dst_m; m != NULL; m = m->m_next) { + if (totlen < m->m_len) { + m->m_len = totlen; + totlen = 0; + } else + totlen -= m->m_len; + } + cmd->dst_m->m_pkthdr.len = cmd->src_m->m_pkthdr.len; + m_freem(cmd->src_m); +#else + device_printf(sc->sc_dev, + "%s,%d: CRYPTO_F_SKBUF src != dst not implemented\n", + __FILE__, __LINE__); +#endif + } + } + + if (cmd->sloplen != 0) { + crypto_copyback(crp->crp_flags, crp->crp_buf, + cmd->src_mapsize - cmd->sloplen, cmd->sloplen, + (caddr_t)&dma->slop[cmd->slopidx]); + } + + i = dma->dstk; u = dma->dstu; + while (u != 0) { + if (i == HIFN_D_DST_RSIZE) + i = 0; +#if 0 + bus_dmamap_sync(sc->sc_dmat, sc->sc_dmamap, + BUS_DMASYNC_POSTREAD | BUS_DMASYNC_POSTWRITE); +#endif + if (dma->dstr[i].l & htole32(HIFN_D_VALID)) { +#if 0 + bus_dmamap_sync(sc->sc_dmat, sc->sc_dmamap, + BUS_DMASYNC_PREREAD | BUS_DMASYNC_PREWRITE); +#endif + break; + } + i++, u--; + } + dma->dstk = i; dma->dstu = u; + + hifnstats.hst_obytes += cmd->dst_mapsize; + + if ((cmd->base_masks & (HIFN_BASE_CMD_CRYPT | HIFN_BASE_CMD_DECODE)) == + HIFN_BASE_CMD_CRYPT) { + for (crd = crp->crp_desc; crd; crd = crd->crd_next) { + if (crd->crd_alg != CRYPTO_DES_CBC && + crd->crd_alg != CRYPTO_3DES_CBC && + crd->crd_alg != CRYPTO_AES_CBC) + continue; + ivlen = ((crd->crd_alg == CRYPTO_AES_CBC) ? + HIFN_AES_IV_LENGTH : HIFN_IV_LENGTH); + crypto_copydata(crp->crp_flags, crp->crp_buf, + crd->crd_skip + crd->crd_len - ivlen, ivlen, + cmd->softc->sc_sessions[cmd->session_num].hs_iv); + break; + } + } + + if (macbuf != NULL) { + for (crd = crp->crp_desc; crd; crd = crd->crd_next) { + int len; + + if (crd->crd_alg != CRYPTO_MD5 && + crd->crd_alg != CRYPTO_SHA1 && + crd->crd_alg != CRYPTO_MD5_HMAC && + crd->crd_alg != CRYPTO_SHA1_HMAC) { + continue; + } + len = cmd->softc->sc_sessions[cmd->session_num].hs_mlen; + crypto_copyback(crp->crp_flags, crp->crp_buf, + crd->crd_inject, len, macbuf); + break; + } + } + + if (cmd->src_map != cmd->dst_map) + pci_unmap_buf(sc, &cmd->dst); + pci_unmap_buf(sc, &cmd->src); + kfree(cmd); + crypto_done(crp); +} + +/* + * 7811 PB3 rev/2 parts lock-up on burst writes to Group 0 + * and Group 1 registers; avoid conditions that could create + * burst writes by doing a read in between the writes. + * + * NB: The read we interpose is always to the same register; + * we do this because reading from an arbitrary (e.g. last) + * register may not always work. + */ +static void +hifn_write_reg_0(struct hifn_softc *sc, bus_size_t reg, u_int32_t val) +{ + if (sc->sc_flags & HIFN_IS_7811) { + if (sc->sc_bar0_lastreg == reg - 4) + readl(sc->sc_bar0 + HIFN_0_PUCNFG); + sc->sc_bar0_lastreg = reg; + } + writel(val, sc->sc_bar0 + reg); +} + +static void +hifn_write_reg_1(struct hifn_softc *sc, bus_size_t reg, u_int32_t val) +{ + if (sc->sc_flags & HIFN_IS_7811) { + if (sc->sc_bar1_lastreg == reg - 4) + readl(sc->sc_bar1 + HIFN_1_REVID); + sc->sc_bar1_lastreg = reg; + } + writel(val, sc->sc_bar1 + reg); +} + + +static struct pci_device_id hifn_pci_tbl[] = { + { PCI_VENDOR_HIFN, PCI_PRODUCT_HIFN_7951, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, }, + { PCI_VENDOR_HIFN, PCI_PRODUCT_HIFN_7955, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, }, + { PCI_VENDOR_HIFN, PCI_PRODUCT_HIFN_7956, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, }, + { PCI_VENDOR_NETSEC, PCI_PRODUCT_NETSEC_7751, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, }, + { PCI_VENDOR_INVERTEX, PCI_PRODUCT_INVERTEX_AEON, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, }, + { PCI_VENDOR_HIFN, PCI_PRODUCT_HIFN_7811, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, }, + /* + * Other vendors share this PCI ID as well, such as + * http://www.powercrypt.com, and obviously they also + * use the same key. + */ + { PCI_VENDOR_HIFN, PCI_PRODUCT_HIFN_7751, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, }, + { 0, 0, 0, 0, 0, 0, } +}; +MODULE_DEVICE_TABLE(pci, hifn_pci_tbl); + +static struct pci_driver hifn_driver = { + .name = "hifn", + .id_table = hifn_pci_tbl, + .probe = hifn_probe, + .remove = hifn_remove, + /* add PM stuff here one day */ +}; + +static int __init hifn_init (void) +{ + struct hifn_softc *sc = NULL; + int rc; + + DPRINTF("%s(%p)\n", __FUNCTION__, hifn_init); + + rc = pci_register_driver(&hifn_driver); + pci_register_driver_compat(&hifn_driver, rc); + + return rc; +} + +static void __exit hifn_exit (void) +{ + pci_unregister_driver(&hifn_driver); +} + +module_init(hifn_init); +module_exit(hifn_exit); + +MODULE_LICENSE("BSD"); +MODULE_AUTHOR("David McCullough "); +MODULE_DESCRIPTION("OCF driver for hifn PCI crypto devices"); diff --git a/target/linux/generic-2.4/files/crypto/ocf/hifn/hifn7751reg.h b/target/linux/generic-2.4/files/crypto/ocf/hifn/hifn7751reg.h new file mode 100644 index 0000000000..ccf54f9c4e --- /dev/null +++ b/target/linux/generic-2.4/files/crypto/ocf/hifn/hifn7751reg.h @@ -0,0 +1,540 @@ +/* $FreeBSD: src/sys/dev/hifn/hifn7751reg.h,v 1.7 2007/03/21 03:42:49 sam Exp $ */ +/* $OpenBSD: hifn7751reg.h,v 1.35 2002/04/08 17:49:42 jason Exp $ */ + +/*- + * Invertex AEON / Hifn 7751 driver + * Copyright (c) 1999 Invertex Inc. All rights reserved. + * Copyright (c) 1999 Theo de Raadt + * Copyright (c) 2000-2001 Network Security Technologies, Inc. + * http://www.netsec.net + * + * Please send any comments, feedback, bug-fixes, or feature requests to + * software@invertex.com. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. The name of the author may not be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR + * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES + * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. + * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * Effort sponsored in part by the Defense Advanced Research Projects + * Agency (DARPA) and Air Force Research Laboratory, Air Force + * Materiel Command, USAF, under agreement number F30602-01-2-0537. + * + */ +#ifndef __HIFN_H__ +#define __HIFN_H__ + +/* + * Some PCI configuration space offset defines. The names were made + * identical to the names used by the Linux kernel. + */ +#define HIFN_BAR0 PCIR_BAR(0) /* PUC register map */ +#define HIFN_BAR1 PCIR_BAR(1) /* DMA register map */ +#define HIFN_TRDY_TIMEOUT 0x40 +#define HIFN_RETRY_TIMEOUT 0x41 + +/* + * PCI vendor and device identifiers + * (the names are preserved from their OpenBSD source). + */ +#define PCI_VENDOR_HIFN 0x13a3 /* Hifn */ +#define PCI_PRODUCT_HIFN_7751 0x0005 /* 7751 */ +#define PCI_PRODUCT_HIFN_6500 0x0006 /* 6500 */ +#define PCI_PRODUCT_HIFN_7811 0x0007 /* 7811 */ +#define PCI_PRODUCT_HIFN_7855 0x001f /* 7855 */ +#define PCI_PRODUCT_HIFN_7951 0x0012 /* 7951 */ +#define PCI_PRODUCT_HIFN_7955 0x0020 /* 7954/7955 */ +#define PCI_PRODUCT_HIFN_7956 0x001d /* 7956 */ + +#define PCI_VENDOR_INVERTEX 0x14e1 /* Invertex */ +#define PCI_PRODUCT_INVERTEX_AEON 0x0005 /* AEON */ + +#define PCI_VENDOR_NETSEC 0x1660 /* NetSec */ +#define PCI_PRODUCT_NETSEC_7751 0x7751 /* 7751 */ + +/* + * The values below should multiple of 4 -- and be large enough to handle + * any command the driver implements. + * + * MAX_COMMAND = base command + mac command + encrypt command + + * mac-key + rc4-key + * MAX_RESULT = base result + mac result + mac + encrypt result + * + * + */ +#define HIFN_MAX_COMMAND (8 + 8 + 8 + 64 + 260) +#define HIFN_MAX_RESULT (8 + 4 + 20 + 4) + +/* + * hifn_desc_t + * + * Holds an individual descriptor for any of the rings. + */ +typedef struct hifn_desc { + volatile u_int32_t l; /* length and status bits */ + volatile u_int32_t p; +} hifn_desc_t; + +/* + * Masks for the "length" field of struct hifn_desc. + */ +#define HIFN_D_LENGTH 0x0000ffff /* length bit mask */ +#define HIFN_D_MASKDONEIRQ 0x02000000 /* mask the done interrupt */ +#define HIFN_D_DESTOVER 0x04000000 /* destination overflow */ +#define HIFN_D_OVER 0x08000000 /* overflow */ +#define HIFN_D_LAST 0x20000000 /* last descriptor in chain */ +#define HIFN_D_JUMP 0x40000000 /* jump descriptor */ +#define HIFN_D_VALID 0x80000000 /* valid bit */ + + +/* + * Processing Unit Registers (offset from BASEREG0) + */ +#define HIFN_0_PUDATA 0x00 /* Processing Unit Data */ +#define HIFN_0_PUCTRL 0x04 /* Processing Unit Control */ +#define HIFN_0_PUISR 0x08 /* Processing Unit Interrupt Status */ +#define HIFN_0_PUCNFG 0x0c /* Processing Unit Configuration */ +#define HIFN_0_PUIER 0x10 /* Processing Unit Interrupt Enable */ +#define HIFN_0_PUSTAT 0x14 /* Processing Unit Status/Chip ID */ +#define HIFN_0_FIFOSTAT 0x18 /* FIFO Status */ +#define HIFN_0_FIFOCNFG 0x1c /* FIFO Configuration */ +#define HIFN_0_PUCTRL2 0x28 /* Processing Unit Control (2nd map) */ +#define HIFN_0_MUTE1 0x80 +#define HIFN_0_MUTE2 0x90 +#define HIFN_0_SPACESIZE 0x100 /* Register space size */ + +/* Processing Unit Control Register (HIFN_0_PUCTRL) */ +#define HIFN_PUCTRL_CLRSRCFIFO 0x0010 /* clear source fifo */ +#define HIFN_PUCTRL_STOP 0x0008 /* stop pu */ +#define HIFN_PUCTRL_LOCKRAM 0x0004 /* lock ram */ +#define HIFN_PUCTRL_DMAENA 0x0002 /* enable dma */ +#define HIFN_PUCTRL_RESET 0x0001 /* Reset processing unit */ + +/* Processing Unit Interrupt Status Register (HIFN_0_PUISR) */ +#define HIFN_PUISR_CMDINVAL 0x8000 /* Invalid command interrupt */ +#define HIFN_PUISR_DATAERR 0x4000 /* Data error interrupt */ +#define HIFN_PUISR_SRCFIFO 0x2000 /* Source FIFO ready interrupt */ +#define HIFN_PUISR_DSTFIFO 0x1000 /* Destination FIFO ready interrupt */ +#define HIFN_PUISR_DSTOVER 0x0200 /* Destination overrun interrupt */ +#define HIFN_PUISR_SRCCMD 0x0080 /* Source command interrupt */ +#define HIFN_PUISR_SRCCTX 0x0040 /* Source context interrupt */ +#define HIFN_PUISR_SRCDATA 0x0020 /* Source data interrupt */ +#define HIFN_PUISR_DSTDATA 0x0010 /* Destination data interrupt */ +#define HIFN_PUISR_DSTRESULT 0x0004 /* Destination result interrupt */ + +/* Processing Unit Configuration Register (HIFN_0_PUCNFG) */ +#define HIFN_PUCNFG_DRAMMASK 0xe000 /* DRAM size mask */ +#define HIFN_PUCNFG_DSZ_256K 0x0000 /* 256k dram */ +#define HIFN_PUCNFG_DSZ_512K 0x2000 /* 512k dram */ +#define HIFN_PUCNFG_DSZ_1M 0x4000 /* 1m dram */ +#define HIFN_PUCNFG_DSZ_2M 0x6000 /* 2m dram */ +#define HIFN_PUCNFG_DSZ_4M 0x8000 /* 4m dram */ +#define HIFN_PUCNFG_DSZ_8M 0xa000 /* 8m dram */ +#define HIFN_PUNCFG_DSZ_16M 0xc000 /* 16m dram */ +#define HIFN_PUCNFG_DSZ_32M 0xe000 /* 32m dram */ +#define HIFN_PUCNFG_DRAMREFRESH 0x1800 /* DRAM refresh rate mask */ +#define HIFN_PUCNFG_DRFR_512 0x0000 /* 512 divisor of ECLK */ +#define HIFN_PUCNFG_DRFR_256 0x0800 /* 256 divisor of ECLK */ +#define HIFN_PUCNFG_DRFR_128 0x1000 /* 128 divisor of ECLK */ +#define HIFN_PUCNFG_TCALLPHASES 0x0200 /* your guess is as good as mine... */ +#define HIFN_PUCNFG_TCDRVTOTEM 0x0100 /* your guess is as good as mine... */ +#define HIFN_PUCNFG_BIGENDIAN 0x0080 /* DMA big endian mode */ +#define HIFN_PUCNFG_BUS32 0x0040 /* Bus width 32bits */ +#define HIFN_PUCNFG_BUS16 0x0000 /* Bus width 16 bits */ +#define HIFN_PUCNFG_CHIPID 0x0020 /* Allow chipid from PUSTAT */ +#define HIFN_PUCNFG_DRAM 0x0010 /* Context RAM is DRAM */ +#define HIFN_PUCNFG_SRAM 0x0000 /* Context RAM is SRAM */ +#define HIFN_PUCNFG_COMPSING 0x0004 /* Enable single compression context */ +#define HIFN_PUCNFG_ENCCNFG 0x0002 /* Encryption configuration */ + +/* Processing Unit Interrupt Enable Register (HIFN_0_PUIER) */ +#define HIFN_PUIER_CMDINVAL 0x8000 /* Invalid command interrupt */ +#define HIFN_PUIER_DATAERR 0x4000 /* Data error interrupt */ +#define HIFN_PUIER_SRCFIFO 0x2000 /* Source FIFO ready interrupt */ +#define HIFN_PUIER_DSTFIFO 0x1000 /* Destination FIFO ready interrupt */ +#define HIFN_PUIER_DSTOVER 0x0200 /* Destination overrun interrupt */ +#define HIFN_PUIER_SRCCMD 0x0080 /* Source command interrupt */ +#define HIFN_PUIER_SRCCTX 0x0040 /* Source context interrupt */ +#define HIFN_PUIER_SRCDATA 0x0020 /* Source data interrupt */ +#define HIFN_PUIER_DSTDATA 0x0010 /* Destination data interrupt */ +#define HIFN_PUIER_DSTRESULT 0x0004 /* Destination result interrupt */ + +/* Processing Unit Status Register/Chip ID (HIFN_0_PUSTAT) */ +#define HIFN_PUSTAT_CMDINVAL 0x8000 /* Invalid command interrupt */ +#define HIFN_PUSTAT_DATAERR 0x4000 /* Data error interrupt */ +#define HIFN_PUSTAT_SRCFIFO 0x2000 /* Source FIFO ready interrupt */ +#define HIFN_PUSTAT_DSTFIFO 0x1000 /* Destination FIFO ready interrupt */ +#define HIFN_PUSTAT_DSTOVER 0x0200 /* Destination overrun interrupt */ +#define HIFN_PUSTAT_SRCCMD 0x0080 /* Source command interrupt */ +#define HIFN_PUSTAT_SRCCTX 0x0040 /* Source context interrupt */ +#define HIFN_PUSTAT_SRCDATA 0x0020 /* Source data interrupt */ +#define HIFN_PUSTAT_DSTDATA 0x0010 /* Destination data interrupt */ +#define HIFN_PUSTAT_DSTRESULT 0x0004 /* Destination result interrupt */ +#define HIFN_PUSTAT_CHIPREV 0x00ff /* Chip revision mask */ +#define HIFN_PUSTAT_CHIPENA 0xff00 /* Chip enabled mask */ +#define HIFN_PUSTAT_ENA_2 0x1100 /* Level 2 enabled */ +#define HIFN_PUSTAT_ENA_1 0x1000 /* Level 1 enabled */ +#define HIFN_PUSTAT_ENA_0 0x3000 /* Level 0 enabled */ +#define HIFN_PUSTAT_REV_2 0x0020 /* 7751 PT6/2 */ +#define HIFN_PUSTAT_REV_3 0x0030 /* 7751 PT6/3 */ + +/* FIFO Status Register (HIFN_0_FIFOSTAT) */ +#define HIFN_FIFOSTAT_SRC 0x7f00 /* Source FIFO available */ +#define HIFN_FIFOSTAT_DST 0x007f /* Destination FIFO available */ + +/* FIFO Configuration Register (HIFN_0_FIFOCNFG) */ +#define HIFN_FIFOCNFG_THRESHOLD 0x0400 /* must be written as this value */ + +/* + * DMA Interface Registers (offset from BASEREG1) + */ +#define HIFN_1_DMA_CRAR 0x0c /* DMA Command Ring Address */ +#define HIFN_1_DMA_SRAR 0x1c /* DMA Source Ring Address */ +#define HIFN_1_DMA_RRAR 0x2c /* DMA Result Ring Address */ +#define HIFN_1_DMA_DRAR 0x3c /* DMA Destination Ring Address */ +#define HIFN_1_DMA_CSR 0x40 /* DMA Status and Control */ +#define HIFN_1_DMA_IER 0x44 /* DMA Interrupt Enable */ +#define HIFN_1_DMA_CNFG 0x48 /* DMA Configuration */ +#define HIFN_1_PLL 0x4c /* 7955/7956: PLL config */ +#define HIFN_1_7811_RNGENA 0x60 /* 7811: rng enable */ +#define HIFN_1_7811_RNGCFG 0x64 /* 7811: rng config */ +#define HIFN_1_7811_RNGDAT 0x68 /* 7811: rng data */ +#define HIFN_1_7811_RNGSTS 0x6c /* 7811: rng status */ +#define HIFN_1_DMA_CNFG2 0x6c /* 7955/7956: dma config #2 */ +#define HIFN_1_7811_MIPSRST 0x94 /* 7811: MIPS reset */ +#define HIFN_1_REVID 0x98 /* Revision ID */ + +#define HIFN_1_PUB_RESET 0x204 /* Public/RNG Reset */ +#define HIFN_1_PUB_BASE 0x300 /* Public Base Address */ +#define HIFN_1_PUB_OPLEN 0x304 /* 7951-compat Public Operand Length */ +#define HIFN_1_PUB_OP 0x308 /* 7951-compat Public Operand */ +#define HIFN_1_PUB_STATUS 0x30c /* 7951-compat Public Status */ +#define HIFN_1_PUB_IEN 0x310 /* Public Interrupt enable */ +#define HIFN_1_RNG_CONFIG 0x314 /* RNG config */ +#define HIFN_1_RNG_DATA 0x318 /* RNG data */ +#define HIFN_1_PUB_MODE 0x320 /* PK mode */ +#define HIFN_1_PUB_FIFO_OPLEN 0x380 /* first element of oplen fifo */ +#define HIFN_1_PUB_FIFO_OP 0x384 /* first element of op fifo */ +#define HIFN_1_PUB_MEM 0x400 /* start of Public key memory */ +#define HIFN_1_PUB_MEMEND 0xbff /* end of Public key memory */ + +/* DMA Status and Control Register (HIFN_1_DMA_CSR) */ +#define HIFN_DMACSR_D_CTRLMASK 0xc0000000 /* Destinition Ring Control */ +#define HIFN_DMACSR_D_CTRL_NOP 0x00000000 /* Dest. Control: no-op */ +#define HIFN_DMACSR_D_CTRL_DIS 0x40000000 /* Dest. Control: disable */ +#define HIFN_DMACSR_D_CTRL_ENA 0x80000000 /* Dest. Control: enable */ +#define HIFN_DMACSR_D_ABORT 0x20000000 /* Destinition Ring PCIAbort */ +#define HIFN_DMACSR_D_DONE 0x10000000 /* Destinition Ring Done */ +#define HIFN_DMACSR_D_LAST 0x08000000 /* Destinition Ring Last */ +#define HIFN_DMACSR_D_WAIT 0x04000000 /* Destinition Ring Waiting */ +#define HIFN_DMACSR_D_OVER 0x02000000 /* Destinition Ring Overflow */ +#define HIFN_DMACSR_R_CTRL 0x00c00000 /* Result Ring Control */ +#define HIFN_DMACSR_R_CTRL_NOP 0x00000000 /* Result Control: no-op */ +#define HIFN_DMACSR_R_CTRL_DIS 0x00400000 /* Result Control: disable */ +#define HIFN_DMACSR_R_CTRL_ENA 0x00800000 /* Result Control: enable */ +#define HIFN_DMACSR_R_ABORT 0x00200000 /* Result Ring PCI Abort */ +#define HIFN_DMACSR_R_DONE 0x00100000 /* Result Ring Done */ +#define HIFN_DMACSR_R_LAST 0x00080000 /* Result Ring Last */ +#define HIFN_DMACSR_R_WAIT 0x00040000 /* Result Ring Waiting */ +#define HIFN_DMACSR_R_OVER 0x00020000 /* Result Ring Overflow */ +#define HIFN_DMACSR_S_CTRL 0x0000c000 /* Source Ring Control */ +#define HIFN_DMACSR_S_CTRL_NOP 0x00000000 /* Source Control: no-op */ +#define HIFN_DMACSR_S_CTRL_DIS 0x00004000 /* Source Control: disable */ +#define HIFN_DMACSR_S_CTRL_ENA 0x00008000 /* Source Control: enable */ +#define HIFN_DMACSR_S_ABORT 0x00002000 /* Source Ring PCI Abort */ +#define HIFN_DMACSR_S_DONE 0x00001000 /* Source Ring Done */ +#define HIFN_DMACSR_S_LAST 0x00000800 /* Source Ring Last */ +#define HIFN_DMACSR_S_WAIT 0x00000400 /* Source Ring Waiting */ +#define HIFN_DMACSR_ILLW 0x00000200 /* Illegal write (7811 only) */ +#define HIFN_DMACSR_ILLR 0x00000100 /* Illegal read (7811 only) */ +#define HIFN_DMACSR_C_CTRL 0x000000c0 /* Command Ring Control */ +#define HIFN_DMACSR_C_CTRL_NOP 0x00000000 /* Command Control: no-op */ +#define HIFN_DMACSR_C_CTRL_DIS 0x00000040 /* Command Control: disable */ +#define HIFN_DMACSR_C_CTRL_ENA 0x00000080 /* Command Control: enable */ +#define HIFN_DMACSR_C_ABORT 0x00000020 /* Command Ring PCI Abort */ +#define HIFN_DMACSR_C_DONE 0x00000010 /* Command Ring Done */ +#define HIFN_DMACSR_C_LAST 0x00000008 /* Command Ring Last */ +#define HIFN_DMACSR_C_WAIT 0x00000004 /* Command Ring Waiting */ +#define HIFN_DMACSR_PUBDONE 0x00000002 /* Public op done (7951 only) */ +#define HIFN_DMACSR_ENGINE 0x00000001 /* Command Ring Engine IRQ */ + +/* DMA Interrupt Enable Register (HIFN_1_DMA_IER) */ +#define HIFN_DMAIER_D_ABORT 0x20000000 /* Destination Ring PCIAbort */ +#define HIFN_DMAIER_D_DONE 0x10000000 /* Destination Ring Done */ +#define HIFN_DMAIER_D_LAST 0x08000000 /* Destination Ring Last */ +#define HIFN_DMAIER_D_WAIT 0x04000000 /* Destination Ring Waiting */ +#define HIFN_DMAIER_D_OVER 0x02000000 /* Destination Ring Overflow */ +#define HIFN_DMAIER_R_ABORT 0x00200000 /* Result Ring PCI Abort */ +#define HIFN_DMAIER_R_DONE 0x00100000 /* Result Ring Done */ +#define HIFN_DMAIER_R_LAST 0x00080000 /* Result Ring Last */ +#define HIFN_DMAIER_R_WAIT 0x00040000 /* Result Ring Waiting */ +#define HIFN_DMAIER_R_OVER 0x00020000 /* Result Ring Overflow */ +#define HIFN_DMAIER_S_ABORT 0x00002000 /* Source Ring PCI Abort */ +#define HIFN_DMAIER_S_DONE 0x00001000 /* Source Ring Done */ +#define HIFN_DMAIER_S_LAST 0x00000800 /* Source Ring Last */ +#define HIFN_DMAIER_S_WAIT 0x00000400 /* Source Ring Waiting */ +#define HIFN_DMAIER_ILLW 0x00000200 /* Illegal write (7811 only) */ +#define HIFN_DMAIER_ILLR 0x00000100 /* Illegal read (7811 only) */ +#define HIFN_DMAIER_C_ABORT 0x00000020 /* Command Ring PCI Abort */ +#define HIFN_DMAIER_C_DONE 0x00000010 /* Command Ring Done */ +#define HIFN_DMAIER_C_LAST 0x00000008 /* Command Ring Last */ +#define HIFN_DMAIER_C_WAIT 0x00000004 /* Command Ring Waiting */ +#define HIFN_DMAIER_PUBDONE 0x00000002 /* public op done (7951 only) */ +#define HIFN_DMAIER_ENGINE 0x00000001 /* Engine IRQ */ + +/* DMA Configuration Register (HIFN_1_DMA_CNFG) */ +#define HIFN_DMACNFG_BIGENDIAN 0x10000000 /* big endian mode */ +#define HIFN_DMACNFG_POLLFREQ 0x00ff0000 /* Poll frequency mask */ +#define HIFN_DMACNFG_UNLOCK 0x00000800 +#define HIFN_DMACNFG_POLLINVAL 0x00000700 /* Invalid Poll Scalar */ +#define HIFN_DMACNFG_LAST 0x00000010 /* Host control LAST bit */ +#define HIFN_DMACNFG_MODE 0x00000004 /* DMA mode */ +#define HIFN_DMACNFG_DMARESET 0x00000002 /* DMA Reset # */ +#define HIFN_DMACNFG_MSTRESET 0x00000001 /* Master Reset # */ + +/* DMA Configuration Register (HIFN_1_DMA_CNFG2) */ +#define HIFN_DMACNFG2_PKSWAP32 (1 << 19) /* swap the OPLEN/OP reg */ +#define HIFN_DMACNFG2_PKSWAP8 (1 << 18) /* swap the bits of OPLEN/OP */ +#define HIFN_DMACNFG2_BAR0_SWAP32 (1<<17) /* swap the bytes of BAR0 */ +#define HIFN_DMACNFG2_BAR1_SWAP8 (1<<16) /* swap the bits of BAR0 */ +#define HIFN_DMACNFG2_INIT_WRITE_BURST_SHIFT 12 +#define HIFN_DMACNFG2_INIT_READ_BURST_SHIFT 8 +#define HIFN_DMACNFG2_TGT_WRITE_BURST_SHIFT 4 +#define HIFN_DMACNFG2_TGT_READ_BURST_SHIFT 0 + +/* 7811 RNG Enable Register (HIFN_1_7811_RNGENA) */ +#define HIFN_7811_RNGENA_ENA 0x00000001 /* enable RNG */ + +/* 7811 RNG Config Register (HIFN_1_7811_RNGCFG) */ +#define HIFN_7811_RNGCFG_PRE1 0x00000f00 /* first prescalar */ +#define HIFN_7811_RNGCFG_OPRE 0x00000080 /* output prescalar */ +#define HIFN_7811_RNGCFG_DEFL 0x00000f80 /* 2 words/ 1/100 sec */ + +/* 7811 RNG Status Register (HIFN_1_7811_RNGSTS) */ +#define HIFN_7811_RNGSTS_RDY 0x00004000 /* two numbers in FIFO */ +#define HIFN_7811_RNGSTS_UFL 0x00001000 /* rng underflow */ + +/* 7811 MIPS Reset Register (HIFN_1_7811_MIPSRST) */ +#define HIFN_MIPSRST_BAR2SIZE 0xffff0000 /* sdram size */ +#define HIFN_MIPSRST_GPRAMINIT 0x00008000 /* gpram can be accessed */ +#define HIFN_MIPSRST_CRAMINIT 0x00004000 /* ctxram can be accessed */ +#define HIFN_MIPSRST_LED2 0x00000400 /* external LED2 */ +#define HIFN_MIPSRST_LED1 0x00000200 /* external LED1 */ +#define HIFN_MIPSRST_LED0 0x00000100 /* external LED0 */ +#define HIFN_MIPSRST_MIPSDIS 0x00000004 /* disable MIPS */ +#define HIFN_MIPSRST_MIPSRST 0x00000002 /* warm reset MIPS */ +#define HIFN_MIPSRST_MIPSCOLD 0x00000001 /* cold reset MIPS */ + +/* Public key reset register (HIFN_1_PUB_RESET) */ +#define HIFN_PUBRST_RESET 0x00000001 /* reset public/rng unit */ + +/* Public operation register (HIFN_1_PUB_OP) */ +#define HIFN_PUBOP_AOFFSET 0x0000003e /* A offset */ +#define HIFN_PUBOP_BOFFSET 0x00000fc0 /* B offset */ +#define HIFN_PUBOP_MOFFSET 0x0003f000 /* M offset */ +#define HIFN_PUBOP_OP_MASK 0x003c0000 /* Opcode: */ +#define HIFN_PUBOP_OP_NOP 0x00000000 /* NOP */ +#define HIFN_PUBOP_OP_ADD 0x00040000 /* ADD */ +#define HIFN_PUBOP_OP_ADDC 0x00080000 /* ADD w/carry */ +#define HIFN_PUBOP_OP_SUB 0x000c0000 /* SUB */ +#define HIFN_PUBOP_OP_SUBC 0x00100000 /* SUB w/carry */ +#define HIFN_PUBOP_OP_MODADD 0x00140000 /* Modular ADD */ +#define HIFN_PUBOP_OP_MODSUB 0x00180000 /* Modular SUB */ +#define HIFN_PUBOP_OP_INCA 0x001c0000 /* INC A */ +#define HIFN_PUBOP_OP_DECA 0x00200000 /* DEC A */ +#define HIFN_PUBOP_OP_MULT 0x00240000 /* MULT */ +#define HIFN_PUBOP_OP_MODMULT 0x00280000 /* Modular MULT */ +#define HIFN_PUBOP_OP_MODRED 0x002c0000 /* Modular Red */ +#define HIFN_PUBOP_OP_MODEXP 0x00300000 /* Modular Exp */ + +/* Public operand length register (HIFN_1_PUB_OPLEN) */ +#define HIFN_PUBOPLEN_MODLEN 0x0000007f +#define HIFN_PUBOPLEN_EXPLEN 0x0003ff80 +#define HIFN_PUBOPLEN_REDLEN 0x003c0000 + +/* Public status register (HIFN_1_PUB_STATUS) */ +#define HIFN_PUBSTS_DONE 0x00000001 /* operation done */ +#define HIFN_PUBSTS_CARRY 0x00000002 /* carry */ +#define HIFN_PUBSTS_FIFO_EMPTY 0x00000100 /* fifo empty */ +#define HIFN_PUBSTS_FIFO_FULL 0x00000200 /* fifo full */ +#define HIFN_PUBSTS_FIFO_OVFL 0x00000400 /* fifo overflow */ +#define HIFN_PUBSTS_FIFO_WRITE 0x000f0000 /* fifo write */ +#define HIFN_PUBSTS_FIFO_READ 0x0f000000 /* fifo read */ + +/* Public interrupt enable register (HIFN_1_PUB_IEN) */ +#define HIFN_PUBIEN_DONE 0x00000001 /* operation done interrupt */ + +/* Random number generator config register (HIFN_1_RNG_CONFIG) */ +#define HIFN_RNGCFG_ENA 0x00000001 /* enable rng */ + +/* + * Register offsets in register set 1 + */ + +#define HIFN_UNLOCK_SECRET1 0xf4 +#define HIFN_UNLOCK_SECRET2 0xfc + +/* + * PLL config register + * + * This register is present only on 7954/7955/7956 parts. It must be + * programmed according to the bus interface method used by the h/w. + * Note that the parts require a stable clock. Since the PCI clock + * may vary the reference clock must usually be used. To avoid + * overclocking the core logic, setup must be done carefully, refer + * to the driver for details. The exact multiplier required varies + * by part and system configuration; refer to the Hifn documentation. + */ +#define HIFN_PLL_REF_SEL 0x00000001 /* REF/HBI clk selection */ +#define HIFN_PLL_BP 0x00000002 /* bypass (used during setup) */ +/* bit 2 reserved */ +#define HIFN_PLL_PK_CLK_SEL 0x00000008 /* public key clk select */ +#define HIFN_PLL_PE_CLK_SEL 0x00000010 /* packet engine clk select */ +/* bits 5-9 reserved */ +#define HIFN_PLL_MBSET 0x00000400 /* must be set to 1 */ +#define HIFN_PLL_ND 0x00003800 /* Fpll_ref multiplier select */ +#define HIFN_PLL_ND_SHIFT 11 +#define HIFN_PLL_ND_2 0x00000000 /* 2x */ +#define HIFN_PLL_ND_4 0x00000800 /* 4x */ +#define HIFN_PLL_ND_6 0x00001000 /* 6x */ +#define HIFN_PLL_ND_8 0x00001800 /* 8x */ +#define HIFN_PLL_ND_10 0x00002000 /* 10x */ +#define HIFN_PLL_ND_12 0x00002800 /* 12x */ +/* bits 14-15 reserved */ +#define HIFN_PLL_IS 0x00010000 /* charge pump current select */ +/* bits 17-31 reserved */ + +/* + * Board configuration specifies only these bits. + */ +#define HIFN_PLL_CONFIG (HIFN_PLL_IS|HIFN_PLL_ND|HIFN_PLL_REF_SEL) + +/* + * Public Key Engine Mode Register + */ +#define HIFN_PKMODE_HOSTINVERT (1 << 0) /* HOST INVERT */ +#define HIFN_PKMODE_ENHANCED (1 << 1) /* Enable enhanced mode */ + + +/********************************************************************* + * Structs for board commands + * + *********************************************************************/ + +/* + * Structure to help build up the command data structure. + */ +typedef struct hifn_base_command { + volatile u_int16_t masks; + volatile u_int16_t session_num; + volatile u_int16_t total_source_count; + volatile u_int16_t total_dest_count; +} hifn_base_command_t; + +#define HIFN_BASE_CMD_MAC 0x0400 +#define HIFN_BASE_CMD_CRYPT 0x0800 +#define HIFN_BASE_CMD_DECODE 0x2000 +#define HIFN_BASE_CMD_SRCLEN_M 0xc000 +#define HIFN_BASE_CMD_SRCLEN_S 14 +#define HIFN_BASE_CMD_DSTLEN_M 0x3000 +#define HIFN_BASE_CMD_DSTLEN_S 12 +#define HIFN_BASE_CMD_LENMASK_HI 0x30000 +#define HIFN_BASE_CMD_LENMASK_LO 0x0ffff + +/* + * Structure to help build up the command data structure. + */ +typedef struct hifn_crypt_command { + volatile u_int16_t masks; + volatile u_int16_t header_skip; + volatile u_int16_t source_count; + volatile u_int16_t reserved; +} hifn_crypt_command_t; + +#define HIFN_CRYPT_CMD_ALG_MASK 0x0003 /* algorithm: */ +#define HIFN_CRYPT_CMD_ALG_DES 0x0000 /* DES */ +#define HIFN_CRYPT_CMD_ALG_3DES 0x0001 /* 3DES */ +#define HIFN_CRYPT_CMD_ALG_RC4 0x0002 /* RC4 */ +#define HIFN_CRYPT_CMD_ALG_AES 0x0003 /* AES */ +#define HIFN_CRYPT_CMD_MODE_MASK 0x0018 /* Encrypt mode: */ +#define HIFN_CRYPT_CMD_MODE_ECB 0x0000 /* ECB */ +#define HIFN_CRYPT_CMD_MODE_CBC 0x0008 /* CBC */ +#define HIFN_CRYPT_CMD_MODE_CFB 0x0010 /* CFB */ +#define HIFN_CRYPT_CMD_MODE_OFB 0x0018 /* OFB */ +#define HIFN_CRYPT_CMD_CLR_CTX 0x0040 /* clear context */ +#define HIFN_CRYPT_CMD_NEW_KEY 0x0800 /* expect new key */ +#define HIFN_CRYPT_CMD_NEW_IV 0x1000 /* expect new iv */ + +#define HIFN_CRYPT_CMD_SRCLEN_M 0xc000 +#define HIFN_CRYPT_CMD_SRCLEN_S 14 + +#define HIFN_CRYPT_CMD_KSZ_MASK 0x0600 /* AES key size: */ +#define HIFN_CRYPT_CMD_KSZ_128 0x0000 /* 128 bit */ +#define HIFN_CRYPT_CMD_KSZ_192 0x0200 /* 192 bit */ +#define HIFN_CRYPT_CMD_KSZ_256 0x0400 /* 256 bit */ + +/* + * Structure to help build up the command data structure. + */ +typedef struct hifn_mac_command { + volatile u_int16_t masks; + volatile u_int16_t header_skip; + volatile u_int16_t source_count; + volatile u_int16_t reserved; +} hifn_mac_command_t; + +#define HIFN_MAC_CMD_ALG_MASK 0x0001 +#define HIFN_MAC_CMD_ALG_SHA1 0x0000 +#define HIFN_MAC_CMD_ALG_MD5 0x0001 +#define HIFN_MAC_CMD_MODE_MASK 0x000c +#define HIFN_MAC_CMD_MODE_HMAC 0x0000 +#define HIFN_MAC_CMD_MODE_SSL_MAC 0x0004 +#define HIFN_MAC_CMD_MODE_HASH 0x0008 +#define HIFN_MAC_CMD_MODE_FULL 0x0004 +#define HIFN_MAC_CMD_TRUNC 0x0010 +#define HIFN_MAC_CMD_RESULT 0x0020 +#define HIFN_MAC_CMD_APPEND 0x0040 +#define HIFN_MAC_CMD_SRCLEN_M 0xc000 +#define HIFN_MAC_CMD_SRCLEN_S 14 + +/* + * MAC POS IPsec initiates authentication after encryption on encodes + * and before decryption on decodes. + */ +#define HIFN_MAC_CMD_POS_IPSEC 0x0200 +#define HIFN_MAC_CMD_NEW_KEY 0x0800 + +/* + * The poll frequency and poll scalar defines are unshifted values used + * to set fields in the DMA Configuration Register. + */ +#ifndef HIFN_POLL_FREQUENCY +#define HIFN_POLL_FREQUENCY 0x1 +#endif + +#ifndef HIFN_POLL_SCALAR +#define HIFN_POLL_SCALAR 0x0 +#endif + +#define HIFN_MAX_SEGLEN 0xffff /* maximum dma segment len */ +#define HIFN_MAX_DMALEN 0x3ffff /* maximum dma length */ +#endif /* __HIFN_H__ */ diff --git a/target/linux/generic-2.4/files/crypto/ocf/hifn/hifn7751var.h b/target/linux/generic-2.4/files/crypto/ocf/hifn/hifn7751var.h new file mode 100644 index 0000000000..9a5f2319db --- /dev/null +++ b/target/linux/generic-2.4/files/crypto/ocf/hifn/hifn7751var.h @@ -0,0 +1,369 @@ +/* $FreeBSD: src/sys/dev/hifn/hifn7751var.h,v 1.9 2007/03/21 03:42:49 sam Exp $ */ +/* $OpenBSD: hifn7751var.h,v 1.42 2002/04/08 17:49:42 jason Exp $ */ + +/*- + * Invertex AEON / Hifn 7751 driver + * Copyright (c) 1999 Invertex Inc. All rights reserved. + * Copyright (c) 1999 Theo de Raadt + * Copyright (c) 2000-2001 Network Security Technologies, Inc. + * http://www.netsec.net + * + * Please send any comments, feedback, bug-fixes, or feature requests to + * software@invertex.com. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. The name of the author may not be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR + * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES + * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. + * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * Effort sponsored in part by the Defense Advanced Research Projects + * Agency (DARPA) and Air Force Research Laboratory, Air Force + * Materiel Command, USAF, under agreement number F30602-01-2-0537. + * + */ + +#ifndef __HIFN7751VAR_H__ +#define __HIFN7751VAR_H__ + +#ifdef __KERNEL__ + +/* + * Some configurable values for the driver. By default command+result + * descriptor rings are the same size. The src+dst descriptor rings + * are sized at 3.5x the number of potential commands. Slower parts + * (e.g. 7951) tend to run out of src descriptors; faster parts (7811) + * src+cmd/result descriptors. It's not clear that increasing the size + * of the descriptor rings helps performance significantly as other + * factors tend to come into play (e.g. copying misaligned packets). + */ +#define HIFN_D_CMD_RSIZE 24 /* command descriptors */ +#define HIFN_D_SRC_RSIZE ((HIFN_D_CMD_RSIZE * 7) / 2) /* source descriptors */ +#define HIFN_D_RES_RSIZE HIFN_D_CMD_RSIZE /* result descriptors */ +#define HIFN_D_DST_RSIZE HIFN_D_SRC_RSIZE /* destination descriptors */ + +/* + * Length values for cryptography + */ +#define HIFN_DES_KEY_LENGTH 8 +#define HIFN_3DES_KEY_LENGTH 24 +#define HIFN_MAX_CRYPT_KEY_LENGTH HIFN_3DES_KEY_LENGTH +#define HIFN_IV_LENGTH 8 +#define HIFN_AES_IV_LENGTH 16 +#define HIFN_MAX_IV_LENGTH HIFN_AES_IV_LENGTH + +/* + * Length values for authentication + */ +#define HIFN_MAC_KEY_LENGTH 64 +#define HIFN_MD5_LENGTH 16 +#define HIFN_SHA1_LENGTH 20 +#define HIFN_MAC_TRUNC_LENGTH 12 + +#define MAX_SCATTER 64 + +/* + * Data structure to hold all 4 rings and any other ring related data. + */ +struct hifn_dma { + /* + * Descriptor rings. We add +1 to the size to accomidate the + * jump descriptor. + */ + struct hifn_desc cmdr[HIFN_D_CMD_RSIZE+1]; + struct hifn_desc srcr[HIFN_D_SRC_RSIZE+1]; + struct hifn_desc dstr[HIFN_D_DST_RSIZE+1]; + struct hifn_desc resr[HIFN_D_RES_RSIZE+1]; + + struct hifn_command *hifn_commands[HIFN_D_RES_RSIZE]; + + u_char command_bufs[HIFN_D_CMD_RSIZE][HIFN_MAX_COMMAND]; + u_char result_bufs[HIFN_D_CMD_RSIZE][HIFN_MAX_RESULT]; + u_int32_t slop[HIFN_D_CMD_RSIZE]; + + u_int64_t test_src, test_dst; + + /* + * Our current positions for insertion and removal from the desriptor + * rings. + */ + int cmdi, srci, dsti, resi; + volatile int cmdu, srcu, dstu, resu; + int cmdk, srck, dstk, resk; +}; + +struct hifn_session { + int hs_used; + int hs_mlen; + u_int8_t hs_iv[HIFN_MAX_IV_LENGTH]; +}; + +#define HIFN_RING_SYNC(sc, r, i, f) \ + /* DAVIDM bus_dmamap_sync((sc)->sc_dmat, (sc)->sc_dmamap, (f)) */ + +#define HIFN_CMDR_SYNC(sc, i, f) HIFN_RING_SYNC((sc), cmdr, (i), (f)) +#define HIFN_RESR_SYNC(sc, i, f) HIFN_RING_SYNC((sc), resr, (i), (f)) +#define HIFN_SRCR_SYNC(sc, i, f) HIFN_RING_SYNC((sc), srcr, (i), (f)) +#define HIFN_DSTR_SYNC(sc, i, f) HIFN_RING_SYNC((sc), dstr, (i), (f)) + +#define HIFN_CMD_SYNC(sc, i, f) \ + /* DAVIDM bus_dmamap_sync((sc)->sc_dmat, (sc)->sc_dmamap, (f)) */ + +#define HIFN_RES_SYNC(sc, i, f) \ + /* DAVIDM bus_dmamap_sync((sc)->sc_dmat, (sc)->sc_dmamap, (f)) */ + +typedef int bus_size_t; + +/* + * Holds data specific to a single HIFN board. + */ +struct hifn_softc { + softc_device_decl sc_dev; + + struct pci_dev *sc_pcidev; /* PCI device pointer */ + spinlock_t sc_mtx; /* per-instance lock */ + + int sc_num; /* for multiple devs */ + + ocf_iomem_t sc_bar0; + bus_size_t sc_bar0_lastreg;/* bar0 last reg written */ + ocf_iomem_t sc_bar1; + bus_size_t sc_bar1_lastreg;/* bar1 last reg written */ + + int sc_irq; + + u_int32_t sc_dmaier; + u_int32_t sc_drammodel; /* 1=dram, 0=sram */ + u_int32_t sc_pllconfig; /* 7954/7955/7956 PLL config */ + + struct hifn_dma *sc_dma; + dma_addr_t sc_dma_physaddr;/* physical address of sc_dma */ + + int sc_dmansegs; + int32_t sc_cid; + int sc_maxses; + int sc_nsessions; + struct hifn_session *sc_sessions; + int sc_ramsize; + int sc_flags; +#define HIFN_HAS_RNG 0x1 /* includes random number generator */ +#define HIFN_HAS_PUBLIC 0x2 /* includes public key support */ +#define HIFN_HAS_AES 0x4 /* includes AES support */ +#define HIFN_IS_7811 0x8 /* Hifn 7811 part */ +#define HIFN_IS_7956 0x10 /* Hifn 7956/7955 don't have SDRAM */ + + struct timer_list sc_tickto; /* for managing DMA */ + + int sc_rngfirst; + int sc_rnghz; /* RNG polling frequency */ + + int sc_c_busy; /* command ring busy */ + int sc_s_busy; /* source data ring busy */ + int sc_d_busy; /* destination data ring busy */ + int sc_r_busy; /* result ring busy */ + int sc_active; /* for initial countdown */ + int sc_needwakeup; /* ops q'd wating on resources */ + int sc_curbatch; /* # ops submitted w/o int */ + int sc_suspended; +#ifdef HIFN_VULCANDEV + struct cdev *sc_pkdev; +#endif +}; + +#define HIFN_LOCK(_sc) spin_lock_irqsave(&(_sc)->sc_mtx, l_flags) +#define HIFN_UNLOCK(_sc) spin_unlock_irqrestore(&(_sc)->sc_mtx, l_flags) + +/* + * hifn_command_t + * + * This is the control structure used to pass commands to hifn_encrypt(). + * + * flags + * ----- + * Flags is the bitwise "or" values for command configuration. A single + * encrypt direction needs to be set: + * + * HIFN_ENCODE or HIFN_DECODE + * + * To use cryptography, a single crypto algorithm must be included: + * + * HIFN_CRYPT_3DES or HIFN_CRYPT_DES + * + * To use authentication is used, a single MAC algorithm must be included: + * + * HIFN_MAC_MD5 or HIFN_MAC_SHA1 + * + * By default MD5 uses a 16 byte hash and SHA-1 uses a 20 byte hash. + * If the value below is set, hash values are truncated or assumed + * truncated to 12 bytes: + * + * HIFN_MAC_TRUNC + * + * Keys for encryption and authentication can be sent as part of a command, + * or the last key value used with a particular session can be retrieved + * and used again if either of these flags are not specified. + * + * HIFN_CRYPT_NEW_KEY, HIFN_MAC_NEW_KEY + * + * session_num + * ----------- + * A number between 0 and 2048 (for DRAM models) or a number between + * 0 and 768 (for SRAM models). Those who don't want to use session + * numbers should leave value at zero and send a new crypt key and/or + * new MAC key on every command. If you use session numbers and + * don't send a key with a command, the last key sent for that same + * session number will be used. + * + * Warning: Using session numbers and multiboard at the same time + * is currently broken. + * + * mbuf + * ---- + * Either fill in the mbuf pointer and npa=0 or + * fill packp[] and packl[] and set npa to > 0 + * + * mac_header_skip + * --------------- + * The number of bytes of the source_buf that are skipped over before + * authentication begins. This must be a number between 0 and 2^16-1 + * and can be used by IPsec implementers to skip over IP headers. + * *** Value ignored if authentication not used *** + * + * crypt_header_skip + * ----------------- + * The number of bytes of the source_buf that are skipped over before + * the cryptographic operation begins. This must be a number between 0 + * and 2^16-1. For IPsec, this number will always be 8 bytes larger + * than the auth_header_skip (to skip over the ESP header). + * *** Value ignored if cryptography not used *** + * + */ +struct hifn_operand { + union { + struct sk_buff *skb; + struct uio *io; + unsigned char *buf; + } u; + void *map; + bus_size_t mapsize; + int nsegs; + struct { + dma_addr_t ds_addr; + int ds_len; + } segs[MAX_SCATTER]; +}; + +struct hifn_command { + u_int16_t session_num; + u_int16_t base_masks, cry_masks, mac_masks; + u_int8_t iv[HIFN_MAX_IV_LENGTH], *ck, mac[HIFN_MAC_KEY_LENGTH]; + int cklen; + int sloplen, slopidx; + + struct hifn_operand src; + struct hifn_operand dst; + + struct hifn_softc *softc; + struct cryptop *crp; + struct cryptodesc *enccrd, *maccrd; +}; + +#define src_skb src.u.skb +#define src_io src.u.io +#define src_map src.map +#define src_mapsize src.mapsize +#define src_segs src.segs +#define src_nsegs src.nsegs +#define src_buf src.u.buf + +#define dst_skb dst.u.skb +#define dst_io dst.u.io +#define dst_map dst.map +#define dst_mapsize dst.mapsize +#define dst_segs dst.segs +#define dst_nsegs dst.nsegs +#define dst_buf dst.u.buf + +/* + * Return values for hifn_crypto() + */ +#define HIFN_CRYPTO_SUCCESS 0 +#define HIFN_CRYPTO_BAD_INPUT (-1) +#define HIFN_CRYPTO_RINGS_FULL (-2) + +/************************************************************************** + * + * Function: hifn_crypto + * + * Purpose: Called by external drivers to begin an encryption on the + * HIFN board. + * + * Blocking/Non-blocking Issues + * ============================ + * The driver cannot block in hifn_crypto (no calls to tsleep) currently. + * hifn_crypto() returns HIFN_CRYPTO_RINGS_FULL if there is not enough + * room in any of the rings for the request to proceed. + * + * Return Values + * ============= + * 0 for success, negative values on error + * + * Defines for negative error codes are: + * + * HIFN_CRYPTO_BAD_INPUT : The passed in command had invalid settings. + * HIFN_CRYPTO_RINGS_FULL : All DMA rings were full and non-blocking + * behaviour was requested. + * + *************************************************************************/ + +/* + * Convert back and forth from 'sid' to 'card' and 'session' + */ +#define HIFN_CARD(sid) (((sid) & 0xf0000000) >> 28) +#define HIFN_SESSION(sid) ((sid) & 0x000007ff) +#define HIFN_SID(crd,ses) (((crd) << 28) | ((ses) & 0x7ff)) + +#endif /* _KERNEL */ + +struct hifn_stats { + u_int64_t hst_ibytes; + u_int64_t hst_obytes; + u_int32_t hst_ipackets; + u_int32_t hst_opackets; + u_int32_t hst_invalid; + u_int32_t hst_nomem; /* malloc or one of hst_nomem_* */ + u_int32_t hst_abort; + u_int32_t hst_noirq; /* IRQ for no reason */ + u_int32_t hst_totbatch; /* ops submitted w/o interrupt */ + u_int32_t hst_maxbatch; /* max ops submitted together */ + u_int32_t hst_unaligned; /* unaligned src caused copy */ + /* + * The following divides hst_nomem into more specific buckets. + */ + u_int32_t hst_nomem_map; /* bus_dmamap_create failed */ + u_int32_t hst_nomem_load; /* bus_dmamap_load_* failed */ + u_int32_t hst_nomem_mbuf; /* MGET* failed */ + u_int32_t hst_nomem_mcl; /* MCLGET* failed */ + u_int32_t hst_nomem_cr; /* out of command/result descriptor */ + u_int32_t hst_nomem_sd; /* out of src/dst descriptors */ +}; + +#endif /* __HIFN7751VAR_H__ */ diff --git a/target/linux/generic-2.4/files/crypto/ocf/hifn/hifnHIPP.c b/target/linux/generic-2.4/files/crypto/ocf/hifn/hifnHIPP.c new file mode 100644 index 0000000000..45ad7bacfa --- /dev/null +++ b/target/linux/generic-2.4/files/crypto/ocf/hifn/hifnHIPP.c @@ -0,0 +1,420 @@ +/*- + * Driver for Hifn HIPP-I/II chipset + * Copyright (c) 2006 Michael Richardson + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. The name of the author may not be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR + * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES + * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. + * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * Effort sponsored by Hifn Inc. + * + */ + +/* + * Driver for various Hifn encryption processors. + */ +#ifndef AUTOCONF_INCLUDED +#include +#endif +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include + +#include "hifnHIPPreg.h" +#include "hifnHIPPvar.h" + +#if 1 +#define DPRINTF(a...) if (hipp_debug) { \ + printk("%s: ", sc ? \ + device_get_nameunit(sc->sc_dev) : "hifn"); \ + printk(a); \ + } else +#else +#define DPRINTF(a...) +#endif + +typedef int bus_size_t; + +static inline int +pci_get_revid(struct pci_dev *dev) +{ + u8 rid = 0; + pci_read_config_byte(dev, PCI_REVISION_ID, &rid); + return rid; +} + +#define debug hipp_debug +int hipp_debug = 0; +module_param(hipp_debug, int, 0644); +MODULE_PARM_DESC(hipp_debug, "Enable debug"); + +int hipp_maxbatch = 1; +module_param(hipp_maxbatch, int, 0644); +MODULE_PARM_DESC(hipp_maxbatch, "max ops to batch w/o interrupt"); + +static int hipp_probe(struct pci_dev *dev, const struct pci_device_id *ent); +static void hipp_remove(struct pci_dev *dev); +#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,19) +static irqreturn_t hipp_intr(int irq, void *arg); +#else +static irqreturn_t hipp_intr(int irq, void *arg, struct pt_regs *regs); +#endif + +static int hipp_num_chips = 0; +static struct hipp_softc *hipp_chip_idx[HIPP_MAX_CHIPS]; + +static int hipp_newsession(device_t, u_int32_t *, struct cryptoini *); +static int hipp_freesession(device_t, u_int64_t); +static int hipp_process(device_t, struct cryptop *, int); + +static device_method_t hipp_methods = { + /* crypto device methods */ + DEVMETHOD(cryptodev_newsession, hipp_newsession), + DEVMETHOD(cryptodev_freesession,hipp_freesession), + DEVMETHOD(cryptodev_process, hipp_process), +}; + +static __inline u_int32_t +READ_REG(struct hipp_softc *sc, unsigned int barno, bus_size_t reg) +{ + u_int32_t v = readl(sc->sc_bar[barno] + reg); + //sc->sc_bar0_lastreg = (bus_size_t) -1; + return (v); +} +static __inline void +WRITE_REG(struct hipp_softc *sc, unsigned int barno, bus_size_t reg, u_int32_t val) +{ + writel(val, sc->sc_bar[barno] + reg); +} + +#define READ_REG_0(sc, reg) READ_REG(sc, 0, reg) +#define WRITE_REG_0(sc, reg, val) WRITE_REG(sc,0, reg, val) +#define READ_REG_1(sc, reg) READ_REG(sc, 1, reg) +#define WRITE_REG_1(sc, reg, val) WRITE_REG(sc,1, reg, val) + +static int +hipp_newsession(device_t dev, u_int32_t *sidp, struct cryptoini *cri) +{ + return EINVAL; +} + +static int +hipp_freesession(device_t dev, u_int64_t tid) +{ + return EINVAL; +} + +static int +hipp_process(device_t dev, struct cryptop *crp, int hint) +{ + return EINVAL; +} + +static const char* +hipp_partname(struct hipp_softc *sc, char buf[128], size_t blen) +{ + char *n = NULL; + + switch (pci_get_vendor(sc->sc_pcidev)) { + case PCI_VENDOR_HIFN: + switch (pci_get_device(sc->sc_pcidev)) { + case PCI_PRODUCT_HIFN_7855: n = "Hifn 7855"; + case PCI_PRODUCT_HIFN_8155: n = "Hifn 8155"; + case PCI_PRODUCT_HIFN_6500: n = "Hifn 6500"; + } + } + + if(n==NULL) { + snprintf(buf, blen, "VID=%02x,PID=%02x", + pci_get_vendor(sc->sc_pcidev), + pci_get_device(sc->sc_pcidev)); + } else { + buf[0]='\0'; + strncat(buf, n, blen); + } + return buf; +} + +struct hipp_fs_entry { + struct attribute attr; + /* other stuff */ +}; + + +static ssize_t +cryptoid_show(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct hipp_softc *sc; + + sc = pci_get_drvdata(to_pci_dev (dev)); + return sprintf (buf, "%d\n", sc->sc_cid); +} + +struct device_attribute hipp_dev_cryptoid = __ATTR_RO(cryptoid); + +/* + * Attach an interface that successfully probed. + */ +static int +hipp_probe(struct pci_dev *dev, const struct pci_device_id *ent) +{ + struct hipp_softc *sc = NULL; + int i; + //char rbase; + //u_int16_t ena; + int rev; + //int rseg; + int rc; + + DPRINTF("%s()\n", __FUNCTION__); + + if (pci_enable_device(dev) < 0) + return(-ENODEV); + + if (pci_set_mwi(dev)) + return(-ENODEV); + + if (!dev->irq) { + printk("hifn: found device with no IRQ assigned. check BIOS settings!"); + pci_disable_device(dev); + return(-ENODEV); + } + + sc = (struct hipp_softc *) kmalloc(sizeof(*sc), GFP_KERNEL); + if (!sc) + return(-ENOMEM); + memset(sc, 0, sizeof(*sc)); + + softc_device_init(sc, "hifn-hipp", hipp_num_chips, hipp_methods); + + sc->sc_pcidev = dev; + sc->sc_irq = -1; + sc->sc_cid = -1; + sc->sc_num = hipp_num_chips++; + + if (sc->sc_num < HIPP_MAX_CHIPS) + hipp_chip_idx[sc->sc_num] = sc; + + pci_set_drvdata(sc->sc_pcidev, sc); + + spin_lock_init(&sc->sc_mtx); + + /* + * Setup PCI resources. + * The READ_REG_0, WRITE_REG_0, READ_REG_1, + * and WRITE_REG_1 macros throughout the driver are used + * to permit better debugging. + */ + for(i=0; i<4; i++) { + unsigned long mem_start, mem_len; + mem_start = pci_resource_start(sc->sc_pcidev, i); + mem_len = pci_resource_len(sc->sc_pcidev, i); + sc->sc_barphy[i] = (caddr_t)mem_start; + sc->sc_bar[i] = (ocf_iomem_t) ioremap(mem_start, mem_len); + if (!sc->sc_bar[i]) { + device_printf(sc->sc_dev, "cannot map bar%d register space\n", i); + goto fail; + } + } + + //hipp_reset_board(sc, 0); + pci_set_master(sc->sc_pcidev); + + /* + * Arrange the interrupt line. + */ + rc = request_irq(dev->irq, hipp_intr, IRQF_SHARED, "hifn", sc); + if (rc) { + device_printf(sc->sc_dev, "could not map interrupt: %d\n", rc); + goto fail; + } + sc->sc_irq = dev->irq; + + rev = READ_REG_1(sc, HIPP_1_REVID) & 0xffff; + + { + char b[32]; + device_printf(sc->sc_dev, "%s, rev %u", + hipp_partname(sc, b, sizeof(b)), rev); + } + +#if 0 + if (sc->sc_flags & HIFN_IS_7956) + printf(", pll=0x%x<%s clk, %ux mult>", + sc->sc_pllconfig, + sc->sc_pllconfig & HIFN_PLL_REF_SEL ? "ext" : "pci", + 2 + 2*((sc->sc_pllconfig & HIFN_PLL_ND) >> 11)); +#endif + printf("\n"); + + sc->sc_cid = crypto_get_driverid(softc_get_device(sc),CRYPTOCAP_F_HARDWARE); + if (sc->sc_cid < 0) { + device_printf(sc->sc_dev, "could not get crypto driver id\n"); + goto fail; + } + +#if 0 /* cannot work with a non-GPL module */ + /* make a sysfs entry to let the world know what entry we got */ + sysfs_create_file(&sc->sc_pcidev->dev.kobj, &hipp_dev_cryptoid.attr); +#endif + +#if 0 + init_timer(&sc->sc_tickto); + sc->sc_tickto.function = hifn_tick; + sc->sc_tickto.data = (unsigned long) sc->sc_num; + mod_timer(&sc->sc_tickto, jiffies + HZ); +#endif + +#if 0 /* no code here yet ?? */ + crypto_register(sc->sc_cid, CRYPTO_3DES_CBC, 0, 0); +#endif + + return (0); + +fail: + if (sc->sc_cid >= 0) + crypto_unregister_all(sc->sc_cid); + if (sc->sc_irq != -1) + free_irq(sc->sc_irq, sc); + +#if 0 + if (sc->sc_dma) { + /* Turn off DMA polling */ + WRITE_REG_1(sc, HIFN_1_DMA_CNFG, HIFN_DMACNFG_MSTRESET | + HIFN_DMACNFG_DMARESET | HIFN_DMACNFG_MODE); + + pci_free_consistent(sc->sc_pcidev, + sizeof(*sc->sc_dma), + sc->sc_dma, sc->sc_dma_physaddr); + } +#endif + kfree(sc); + return (-ENXIO); +} + +/* + * Detach an interface that successfully probed. + */ +static void +hipp_remove(struct pci_dev *dev) +{ + struct hipp_softc *sc = pci_get_drvdata(dev); + unsigned long l_flags; + + DPRINTF("%s()\n", __FUNCTION__); + + /* disable interrupts */ + HIPP_LOCK(sc); + +#if 0 + WRITE_REG_1(sc, HIFN_1_DMA_IER, 0); + HIFN_UNLOCK(sc); + + /*XXX other resources */ + del_timer_sync(&sc->sc_tickto); + + /* Turn off DMA polling */ + WRITE_REG_1(sc, HIFN_1_DMA_CNFG, HIFN_DMACNFG_MSTRESET | + HIFN_DMACNFG_DMARESET | HIFN_DMACNFG_MODE); +#endif + + crypto_unregister_all(sc->sc_cid); + + free_irq(sc->sc_irq, sc); + +#if 0 + pci_free_consistent(sc->sc_pcidev, sizeof(*sc->sc_dma), + sc->sc_dma, sc->sc_dma_physaddr); +#endif +} + +#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,19) +static irqreturn_t hipp_intr(int irq, void *arg) +#else +static irqreturn_t hipp_intr(int irq, void *arg, struct pt_regs *regs) +#endif +{ + struct hipp_softc *sc = arg; + + sc = sc; /* shut up compiler */ + + return IRQ_HANDLED; +} + +static struct pci_device_id hipp_pci_tbl[] = { + { PCI_VENDOR_HIFN, PCI_PRODUCT_HIFN_7855, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, }, + { PCI_VENDOR_HIFN, PCI_PRODUCT_HIFN_8155, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, }, +}; +MODULE_DEVICE_TABLE(pci, hipp_pci_tbl); + +static struct pci_driver hipp_driver = { + .name = "hipp", + .id_table = hipp_pci_tbl, + .probe = hipp_probe, + .remove = hipp_remove, + /* add PM stuff here one day */ +}; + +static int __init hipp_init (void) +{ + struct hipp_softc *sc = NULL; + int rc; + + DPRINTF("%s(%p)\n", __FUNCTION__, hipp_init); + + rc = pci_register_driver(&hipp_driver); + pci_register_driver_compat(&hipp_driver, rc); + + return rc; +} + +static void __exit hipp_exit (void) +{ + pci_unregister_driver(&hipp_driver); +} + +module_init(hipp_init); +module_exit(hipp_exit); + +MODULE_LICENSE("BSD"); +MODULE_AUTHOR("Michael Richardson "); +MODULE_DESCRIPTION("OCF driver for hifn HIPP-I/II PCI crypto devices"); diff --git a/target/linux/generic-2.4/files/crypto/ocf/hifn/hifnHIPPreg.h b/target/linux/generic-2.4/files/crypto/ocf/hifn/hifnHIPPreg.h new file mode 100644 index 0000000000..8c0e72038f --- /dev/null +++ b/target/linux/generic-2.4/files/crypto/ocf/hifn/hifnHIPPreg.h @@ -0,0 +1,46 @@ +/*- + * Hifn HIPP-I/HIPP-II (7855/8155) driver. + * Copyright (c) 2006 Michael Richardson + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. The name of the author may not be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR + * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES + * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. + * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * Effort sponsored by Hifn inc. + * + */ + +#ifndef __HIFNHIPP_H__ +#define __HIFNHIPP_H__ + +/* + * PCI vendor and device identifiers + */ +#define PCI_VENDOR_HIFN 0x13a3 /* Hifn */ +#define PCI_PRODUCT_HIFN_6500 0x0006 /* 6500 */ +#define PCI_PRODUCT_HIFN_7855 0x001f /* 7855 */ +#define PCI_PRODUCT_HIFN_8155 0x999 /* XXX 8155 */ + +#define HIPP_1_REVID 0x01 /* BOGUS */ + +#endif /* __HIPP_H__ */ diff --git a/target/linux/generic-2.4/files/crypto/ocf/hifn/hifnHIPPvar.h b/target/linux/generic-2.4/files/crypto/ocf/hifn/hifnHIPPvar.h new file mode 100644 index 0000000000..61d292fb5e --- /dev/null +++ b/target/linux/generic-2.4/files/crypto/ocf/hifn/hifnHIPPvar.h @@ -0,0 +1,93 @@ +/* + * Hifn HIPP-I/HIPP-II (7855/8155) driver. + * Copyright (c) 2006 Michael Richardson * + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. The name of the author may not be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR + * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES + * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. + * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * Effort sponsored by Hifn inc. + * + */ + +#ifndef __HIFNHIPPVAR_H__ +#define __HIFNHIPPVAR_H__ + +#define HIPP_MAX_CHIPS 8 + +/* + * Holds data specific to a single Hifn HIPP-I board. + */ +struct hipp_softc { + softc_device_decl sc_dev; + + struct pci_dev *sc_pcidev; /* device backpointer */ + ocf_iomem_t sc_bar[5]; + caddr_t sc_barphy[5]; /* physical address */ + int sc_num; /* for multiple devs */ + spinlock_t sc_mtx; /* per-instance lock */ + int32_t sc_cid; + int sc_irq; + +#if 0 + + u_int32_t sc_dmaier; + u_int32_t sc_drammodel; /* 1=dram, 0=sram */ + u_int32_t sc_pllconfig; /* 7954/7955/7956 PLL config */ + + struct hifn_dma *sc_dma; + dma_addr_t sc_dma_physaddr;/* physical address of sc_dma */ + + int sc_dmansegs; + int sc_maxses; + int sc_nsessions; + struct hifn_session *sc_sessions; + int sc_ramsize; + int sc_flags; +#define HIFN_HAS_RNG 0x1 /* includes random number generator */ +#define HIFN_HAS_PUBLIC 0x2 /* includes public key support */ +#define HIFN_HAS_AES 0x4 /* includes AES support */ +#define HIFN_IS_7811 0x8 /* Hifn 7811 part */ +#define HIFN_IS_7956 0x10 /* Hifn 7956/7955 don't have SDRAM */ + + struct timer_list sc_tickto; /* for managing DMA */ + + int sc_rngfirst; + int sc_rnghz; /* RNG polling frequency */ + + int sc_c_busy; /* command ring busy */ + int sc_s_busy; /* source data ring busy */ + int sc_d_busy; /* destination data ring busy */ + int sc_r_busy; /* result ring busy */ + int sc_active; /* for initial countdown */ + int sc_needwakeup; /* ops q'd wating on resources */ + int sc_curbatch; /* # ops submitted w/o int */ + int sc_suspended; + struct miscdevice sc_miscdev; +#endif +}; + +#define HIPP_LOCK(_sc) spin_lock_irqsave(&(_sc)->sc_mtx, l_flags) +#define HIPP_UNLOCK(_sc) spin_unlock_irqrestore(&(_sc)->sc_mtx, l_flags) + +#endif /* __HIFNHIPPVAR_H__ */ diff --git a/target/linux/generic-2.4/files/crypto/ocf/ixp4xx/Makefile b/target/linux/generic-2.4/files/crypto/ocf/ixp4xx/Makefile new file mode 100644 index 0000000000..d94a3b79fa --- /dev/null +++ b/target/linux/generic-2.4/files/crypto/ocf/ixp4xx/Makefile @@ -0,0 +1,104 @@ +# for SGlinux builds +-include $(ROOTDIR)/modules/.config + +# +# You will need to point this at your Intel ixp425 includes, this portion +# of the Makefile only really works under SGLinux with the appropriate libs +# installed. They can be downloaded from http://www.snapgear.org/ +# +ifeq ($(CONFIG_CPU_IXP46X),y) +IXPLATFORM = ixp46X +else +ifeq ($(CONFIG_CPU_IXP43X),y) +IXPLATFORM = ixp43X +else +IXPLATFORM = ixp42X +endif +endif + +ifdef CONFIG_IXP400_LIB_2_4 +IX_XSCALE_SW = $(ROOTDIR)/modules/ixp425/ixp400-2.4/ixp400_xscale_sw +OSAL_DIR = $(ROOTDIR)/modules/ixp425/ixp400-2.4/ixp_osal +endif +ifdef CONFIG_IXP400_LIB_2_1 +IX_XSCALE_SW = $(ROOTDIR)/modules/ixp425/ixp400-2.1/ixp400_xscale_sw +OSAL_DIR = $(ROOTDIR)/modules/ixp425/ixp400-2.1/ixp_osal +endif +ifdef CONFIG_IXP400_LIB_2_0 +IX_XSCALE_SW = $(ROOTDIR)/modules/ixp425/ixp400-2.0/ixp400_xscale_sw +OSAL_DIR = $(ROOTDIR)/modules/ixp425/ixp400-2.0/ixp_osal +endif +ifdef IX_XSCALE_SW +ifdef CONFIG_IXP400_LIB_2_4 +IXP_CFLAGS = \ + -I$(ROOTDIR)/. \ + -I$(IX_XSCALE_SW)/src/include \ + -I$(OSAL_DIR)/common/include/ \ + -I$(OSAL_DIR)/common/include/modules/ \ + -I$(OSAL_DIR)/common/include/modules/ddk/ \ + -I$(OSAL_DIR)/common/include/modules/bufferMgt/ \ + -I$(OSAL_DIR)/common/include/modules/ioMem/ \ + -I$(OSAL_DIR)/common/os/linux/include/ \ + -I$(OSAL_DIR)/common/os/linux/include/core/ \ + -I$(OSAL_DIR)/common/os/linux/include/modules/ \ + -I$(OSAL_DIR)/common/os/linux/include/modules/ddk/ \ + -I$(OSAL_DIR)/common/os/linux/include/modules/bufferMgt/ \ + -I$(OSAL_DIR)/common/os/linux/include/modules/ioMem/ \ + -I$(OSAL_DIR)/platforms/$(IXPLATFORM)/include/ \ + -I$(OSAL_DIR)/platforms/$(IXPLATFORM)/os/linux/include/ \ + -DENABLE_IOMEM -DENABLE_BUFFERMGT -DENABLE_DDK \ + -DUSE_IXP4XX_CRYPTO +else +IXP_CFLAGS = \ + -I$(ROOTDIR)/. \ + -I$(IX_XSCALE_SW)/src/include \ + -I$(OSAL_DIR)/ \ + -I$(OSAL_DIR)/os/linux/include/ \ + -I$(OSAL_DIR)/os/linux/include/modules/ \ + -I$(OSAL_DIR)/os/linux/include/modules/ioMem/ \ + -I$(OSAL_DIR)/os/linux/include/modules/bufferMgt/ \ + -I$(OSAL_DIR)/os/linux/include/core/ \ + -I$(OSAL_DIR)/os/linux/include/platforms/ \ + -I$(OSAL_DIR)/os/linux/include/platforms/ixp400/ \ + -I$(OSAL_DIR)/os/linux/include/platforms/ixp400/ixp425 \ + -I$(OSAL_DIR)/os/linux/include/platforms/ixp400/ixp465 \ + -I$(OSAL_DIR)/os/linux/include/core/ \ + -I$(OSAL_DIR)/include/ \ + -I$(OSAL_DIR)/include/modules/ \ + -I$(OSAL_DIR)/include/modules/bufferMgt/ \ + -I$(OSAL_DIR)/include/modules/ioMem/ \ + -I$(OSAL_DIR)/include/platforms/ \ + -I$(OSAL_DIR)/include/platforms/ixp400/ \ + -DUSE_IXP4XX_CRYPTO +endif +endif +ifdef CONFIG_IXP400_LIB_1_4 +IXP_CFLAGS = \ + -I$(ROOTDIR)/. \ + -I$(ROOTDIR)/modules/ixp425/ixp400-1.4/ixp400_xscale_sw/src/include \ + -I$(ROOTDIR)/modules/ixp425/ixp400-1.4/ixp400_xscale_sw/src/linux \ + -DUSE_IXP4XX_CRYPTO +endif +ifndef IXPDIR +IXPDIR = ixp-version-is-not-supported +endif + +ifeq ($(CONFIG_CPU_IXP46X),y) +IXP_CFLAGS += -D__ixp46X +else +ifeq ($(CONFIG_CPU_IXP43X),y) +IXP_CFLAGS += -D__ixp43X +else +IXP_CFLAGS += -D__ixp42X +endif +endif + +obj-$(CONFIG_OCF_IXP4XX) += ixp4xx.o + +obj ?= . +EXTRA_CFLAGS += $(IXP_CFLAGS) -I$(obj)/.. -I$(obj)/. + +ifdef TOPDIR +-include $(TOPDIR)/Rules.make +endif + diff --git a/target/linux/generic-2.4/files/crypto/ocf/ixp4xx/ixp4xx.c b/target/linux/generic-2.4/files/crypto/ocf/ixp4xx/ixp4xx.c new file mode 100644 index 0000000000..d5414a4ef5 --- /dev/null +++ b/target/linux/generic-2.4/files/crypto/ocf/ixp4xx/ixp4xx.c @@ -0,0 +1,1324 @@ +/* + * An OCF module that uses Intels IXP CryptACC API to do the crypto. + * This driver requires the IXP400 Access Library that is available + * from Intel in order to operate (or compile). + * + * Written by David McCullough + * Copyright (C) 2006-2010 David McCullough + * Copyright (C) 2004-2005 Intel Corporation. + * + * LICENSE TERMS + * + * The free distribution and use of this software in both source and binary + * form is allowed (with or without changes) provided that: + * + * 1. distributions of this source code include the above copyright + * notice, this list of conditions and the following disclaimer; + * + * 2. distributions in binary form include the above copyright + * notice, this list of conditions and the following disclaimer + * in the documentation and/or other associated materials; + * + * 3. the copyright holder's name is not used to endorse products + * built using this software without specific written permission. + * + * ALTERNATIVELY, provided that this notice is retained in full, this product + * may be distributed under the terms of the GNU General Public License (GPL), + * in which case the provisions of the GPL apply INSTEAD OF those given above. + * + * DISCLAIMER + * + * This software is provided 'as is' with no explicit or implied warranties + * in respect of its properties, including, but not limited to, correctness + * and/or fitness for purpose. + */ + +#ifndef AUTOCONF_INCLUDED +#include +#endif +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include + +#include +#include + +#ifndef IX_MBUF_PRIV +#define IX_MBUF_PRIV(x) ((x)->priv) +#endif + +struct ixp_data; + +struct ixp_q { + struct list_head ixp_q_list; + struct ixp_data *ixp_q_data; + struct cryptop *ixp_q_crp; + struct cryptodesc *ixp_q_ccrd; + struct cryptodesc *ixp_q_acrd; + IX_MBUF ixp_q_mbuf; + UINT8 *ixp_hash_dest; /* Location for hash in client buffer */ + UINT8 *ixp_hash_src; /* Location of hash in internal buffer */ + unsigned char ixp_q_iv_data[IX_CRYPTO_ACC_MAX_CIPHER_IV_LENGTH]; + unsigned char *ixp_q_iv; +}; + +struct ixp_data { + int ixp_registered; /* is the context registered */ + int ixp_crd_flags; /* detect direction changes */ + + int ixp_cipher_alg; + int ixp_auth_alg; + + UINT32 ixp_ctx_id; + UINT32 ixp_hash_key_id; /* used when hashing */ + IxCryptoAccCtx ixp_ctx; + IX_MBUF ixp_pri_mbuf; + IX_MBUF ixp_sec_mbuf; + + struct work_struct ixp_pending_work; + struct work_struct ixp_registration_work; + struct list_head ixp_q; /* unprocessed requests */ +}; + +#ifdef __ixp46X + +#define MAX_IOP_SIZE 64 /* words */ +#define MAX_OOP_SIZE 128 + +#define MAX_PARAMS 3 + +struct ixp_pkq { + struct list_head pkq_list; + struct cryptkop *pkq_krp; + + IxCryptoAccPkeEauInOperands pkq_op; + IxCryptoAccPkeEauOpResult pkq_result; + + UINT32 pkq_ibuf0[MAX_IOP_SIZE]; + UINT32 pkq_ibuf1[MAX_IOP_SIZE]; + UINT32 pkq_ibuf2[MAX_IOP_SIZE]; + UINT32 pkq_obuf[MAX_OOP_SIZE]; +}; + +static LIST_HEAD(ixp_pkq); /* current PK wait list */ +static struct ixp_pkq *ixp_pk_cur; +static spinlock_t ixp_pkq_lock; + +#endif /* __ixp46X */ + +static int ixp_blocked = 0; + +static int32_t ixp_id = -1; +static struct ixp_data **ixp_sessions = NULL; +static u_int32_t ixp_sesnum = 0; + +static int ixp_process(device_t, struct cryptop *, int); +static int ixp_newsession(device_t, u_int32_t *, struct cryptoini *); +static int ixp_freesession(device_t, u_int64_t); +#ifdef __ixp46X +static int ixp_kprocess(device_t, struct cryptkop *krp, int hint); +#endif + +#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,20) +static kmem_cache_t *qcache; +#else +static struct kmem_cache *qcache; +#endif + +#define debug ixp_debug +static int ixp_debug = 0; +module_param(ixp_debug, int, 0644); +MODULE_PARM_DESC(ixp_debug, "Enable debug"); + +static int ixp_init_crypto = 1; +module_param(ixp_init_crypto, int, 0444); /* RO after load/boot */ +MODULE_PARM_DESC(ixp_init_crypto, "Call ixCryptoAccInit (default is 1)"); + +static void ixp_process_pending(void *arg); +static void ixp_registration(void *arg); +#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20) +static void ixp_process_pending_wq(struct work_struct *work); +static void ixp_registration_wq(struct work_struct *work); +#endif + +/* + * dummy device structure + */ + +static struct { + softc_device_decl sc_dev; +} ixpdev; + +static device_method_t ixp_methods = { + /* crypto device methods */ + DEVMETHOD(cryptodev_newsession, ixp_newsession), + DEVMETHOD(cryptodev_freesession,ixp_freesession), + DEVMETHOD(cryptodev_process, ixp_process), +#ifdef __ixp46X + DEVMETHOD(cryptodev_kprocess, ixp_kprocess), +#endif +}; + +/* + * Generate a new software session. + */ +static int +ixp_newsession(device_t dev, u_int32_t *sid, struct cryptoini *cri) +{ + struct ixp_data *ixp; + u_int32_t i; +#define AUTH_LEN(cri, def) \ + (cri->cri_mlen ? cri->cri_mlen : (def)) + + dprintk("%s():alg %d\n", __FUNCTION__,cri->cri_alg); + if (sid == NULL || cri == NULL) { + dprintk("%s,%d - EINVAL\n", __FILE__, __LINE__); + return EINVAL; + } + + if (ixp_sessions) { + for (i = 1; i < ixp_sesnum; i++) + if (ixp_sessions[i] == NULL) + break; + } else + i = 1; /* NB: to silence compiler warning */ + + if (ixp_sessions == NULL || i == ixp_sesnum) { + struct ixp_data **ixpd; + + if (ixp_sessions == NULL) { + i = 1; /* We leave ixp_sessions[0] empty */ + ixp_sesnum = CRYPTO_SW_SESSIONS; + } else + ixp_sesnum *= 2; + + ixpd = kmalloc(ixp_sesnum * sizeof(struct ixp_data *), SLAB_ATOMIC); + if (ixpd == NULL) { + /* Reset session number */ + if (ixp_sesnum == CRYPTO_SW_SESSIONS) + ixp_sesnum = 0; + else + ixp_sesnum /= 2; + dprintk("%s,%d: ENOBUFS\n", __FILE__, __LINE__); + return ENOBUFS; + } + memset(ixpd, 0, ixp_sesnum * sizeof(struct ixp_data *)); + + /* Copy existing sessions */ + if (ixp_sessions) { + memcpy(ixpd, ixp_sessions, + (ixp_sesnum / 2) * sizeof(struct ixp_data *)); + kfree(ixp_sessions); + } + + ixp_sessions = ixpd; + } + + ixp_sessions[i] = (struct ixp_data *) kmalloc(sizeof(struct ixp_data), + SLAB_ATOMIC); + if (ixp_sessions[i] == NULL) { + ixp_freesession(NULL, i); + dprintk("%s,%d: EINVAL\n", __FILE__, __LINE__); + return ENOBUFS; + } + + *sid = i; + + ixp = ixp_sessions[i]; + memset(ixp, 0, sizeof(*ixp)); + + ixp->ixp_cipher_alg = -1; + ixp->ixp_auth_alg = -1; + ixp->ixp_ctx_id = -1; + INIT_LIST_HEAD(&ixp->ixp_q); + + ixp->ixp_ctx.useDifferentSrcAndDestMbufs = 0; + + while (cri) { + switch (cri->cri_alg) { + case CRYPTO_DES_CBC: + ixp->ixp_cipher_alg = cri->cri_alg; + ixp->ixp_ctx.cipherCtx.cipherAlgo = IX_CRYPTO_ACC_CIPHER_DES; + ixp->ixp_ctx.cipherCtx.cipherMode = IX_CRYPTO_ACC_MODE_CBC; + ixp->ixp_ctx.cipherCtx.cipherKeyLen = (cri->cri_klen + 7) / 8; + ixp->ixp_ctx.cipherCtx.cipherBlockLen = IX_CRYPTO_ACC_DES_BLOCK_64; + ixp->ixp_ctx.cipherCtx.cipherInitialVectorLen = + IX_CRYPTO_ACC_DES_IV_64; + memcpy(ixp->ixp_ctx.cipherCtx.key.cipherKey, + cri->cri_key, (cri->cri_klen + 7) / 8); + break; + + case CRYPTO_3DES_CBC: + ixp->ixp_cipher_alg = cri->cri_alg; + ixp->ixp_ctx.cipherCtx.cipherAlgo = IX_CRYPTO_ACC_CIPHER_3DES; + ixp->ixp_ctx.cipherCtx.cipherMode = IX_CRYPTO_ACC_MODE_CBC; + ixp->ixp_ctx.cipherCtx.cipherKeyLen = (cri->cri_klen + 7) / 8; + ixp->ixp_ctx.cipherCtx.cipherBlockLen = IX_CRYPTO_ACC_DES_BLOCK_64; + ixp->ixp_ctx.cipherCtx.cipherInitialVectorLen = + IX_CRYPTO_ACC_DES_IV_64; + memcpy(ixp->ixp_ctx.cipherCtx.key.cipherKey, + cri->cri_key, (cri->cri_klen + 7) / 8); + break; + + case CRYPTO_RIJNDAEL128_CBC: + ixp->ixp_cipher_alg = cri->cri_alg; + ixp->ixp_ctx.cipherCtx.cipherAlgo = IX_CRYPTO_ACC_CIPHER_AES; + ixp->ixp_ctx.cipherCtx.cipherMode = IX_CRYPTO_ACC_MODE_CBC; + ixp->ixp_ctx.cipherCtx.cipherKeyLen = (cri->cri_klen + 7) / 8; + ixp->ixp_ctx.cipherCtx.cipherBlockLen = 16; + ixp->ixp_ctx.cipherCtx.cipherInitialVectorLen = 16; + memcpy(ixp->ixp_ctx.cipherCtx.key.cipherKey, + cri->cri_key, (cri->cri_klen + 7) / 8); + break; + + case CRYPTO_MD5: + case CRYPTO_MD5_HMAC: + ixp->ixp_auth_alg = cri->cri_alg; + ixp->ixp_ctx.authCtx.authAlgo = IX_CRYPTO_ACC_AUTH_MD5; + ixp->ixp_ctx.authCtx.authDigestLen = AUTH_LEN(cri, MD5_HASH_LEN); + ixp->ixp_ctx.authCtx.aadLen = 0; + /* Only MD5_HMAC needs a key */ + if (cri->cri_alg == CRYPTO_MD5_HMAC) { + ixp->ixp_ctx.authCtx.authKeyLen = (cri->cri_klen + 7) / 8; + if (ixp->ixp_ctx.authCtx.authKeyLen > + sizeof(ixp->ixp_ctx.authCtx.key.authKey)) { + printk( + "ixp4xx: Invalid key length for MD5_HMAC - %d bits\n", + cri->cri_klen); + ixp_freesession(NULL, i); + return EINVAL; + } + memcpy(ixp->ixp_ctx.authCtx.key.authKey, + cri->cri_key, (cri->cri_klen + 7) / 8); + } + break; + + case CRYPTO_SHA1: + case CRYPTO_SHA1_HMAC: + ixp->ixp_auth_alg = cri->cri_alg; + ixp->ixp_ctx.authCtx.authAlgo = IX_CRYPTO_ACC_AUTH_SHA1; + ixp->ixp_ctx.authCtx.authDigestLen = AUTH_LEN(cri, SHA1_HASH_LEN); + ixp->ixp_ctx.authCtx.aadLen = 0; + /* Only SHA1_HMAC needs a key */ + if (cri->cri_alg == CRYPTO_SHA1_HMAC) { + ixp->ixp_ctx.authCtx.authKeyLen = (cri->cri_klen + 7) / 8; + if (ixp->ixp_ctx.authCtx.authKeyLen > + sizeof(ixp->ixp_ctx.authCtx.key.authKey)) { + printk( + "ixp4xx: Invalid key length for SHA1_HMAC - %d bits\n", + cri->cri_klen); + ixp_freesession(NULL, i); + return EINVAL; + } + memcpy(ixp->ixp_ctx.authCtx.key.authKey, + cri->cri_key, (cri->cri_klen + 7) / 8); + } + break; + + default: + printk("ixp: unknown algo 0x%x\n", cri->cri_alg); + ixp_freesession(NULL, i); + return EINVAL; + } + cri = cri->cri_next; + } + +#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20) + INIT_WORK(&ixp->ixp_pending_work, ixp_process_pending_wq); + INIT_WORK(&ixp->ixp_registration_work, ixp_registration_wq); +#else + INIT_WORK(&ixp->ixp_pending_work, ixp_process_pending, ixp); + INIT_WORK(&ixp->ixp_registration_work, ixp_registration, ixp); +#endif + + return 0; +} + + +/* + * Free a session. + */ +static int +ixp_freesession(device_t dev, u_int64_t tid) +{ + u_int32_t sid = CRYPTO_SESID2LID(tid); + + dprintk("%s()\n", __FUNCTION__); + if (sid > ixp_sesnum || ixp_sessions == NULL || + ixp_sessions[sid] == NULL) { + dprintk("%s,%d: EINVAL\n", __FILE__, __LINE__); + return EINVAL; + } + + /* Silently accept and return */ + if (sid == 0) + return 0; + + if (ixp_sessions[sid]) { + if (ixp_sessions[sid]->ixp_ctx_id != -1) { + ixCryptoAccCtxUnregister(ixp_sessions[sid]->ixp_ctx_id); + ixp_sessions[sid]->ixp_ctx_id = -1; + } + kfree(ixp_sessions[sid]); + } + ixp_sessions[sid] = NULL; + if (ixp_blocked) { + ixp_blocked = 0; + crypto_unblock(ixp_id, CRYPTO_SYMQ); + } + return 0; +} + + +/* + * callback for when hash processing is complete + */ + +static void +ixp_hash_perform_cb( + UINT32 hash_key_id, + IX_MBUF *bufp, + IxCryptoAccStatus status) +{ + struct ixp_q *q; + + dprintk("%s(%u, %p, 0x%x)\n", __FUNCTION__, hash_key_id, bufp, status); + + if (bufp == NULL) { + printk("ixp: NULL buf in %s\n", __FUNCTION__); + return; + } + + q = IX_MBUF_PRIV(bufp); + if (q == NULL) { + printk("ixp: NULL priv in %s\n", __FUNCTION__); + return; + } + + if (status == IX_CRYPTO_ACC_STATUS_SUCCESS) { + /* On success, need to copy hash back into original client buffer */ + memcpy(q->ixp_hash_dest, q->ixp_hash_src, + (q->ixp_q_data->ixp_auth_alg == CRYPTO_SHA1) ? + SHA1_HASH_LEN : MD5_HASH_LEN); + } + else { + printk("ixp: hash perform failed status=%d\n", status); + q->ixp_q_crp->crp_etype = EINVAL; + } + + /* Free internal buffer used for hashing */ + kfree(IX_MBUF_MDATA(&q->ixp_q_mbuf)); + + crypto_done(q->ixp_q_crp); + kmem_cache_free(qcache, q); +} + +/* + * setup a request and perform it + */ +static void +ixp_q_process(struct ixp_q *q) +{ + IxCryptoAccStatus status; + struct ixp_data *ixp = q->ixp_q_data; + int auth_off = 0; + int auth_len = 0; + int crypt_off = 0; + int crypt_len = 0; + int icv_off = 0; + char *crypt_func; + + dprintk("%s(%p)\n", __FUNCTION__, q); + + if (q->ixp_q_ccrd) { + if (q->ixp_q_ccrd->crd_flags & CRD_F_IV_EXPLICIT) { + q->ixp_q_iv = q->ixp_q_ccrd->crd_iv; + } else { + q->ixp_q_iv = q->ixp_q_iv_data; + crypto_copydata(q->ixp_q_crp->crp_flags, q->ixp_q_crp->crp_buf, + q->ixp_q_ccrd->crd_inject, + ixp->ixp_ctx.cipherCtx.cipherInitialVectorLen, + (caddr_t) q->ixp_q_iv); + } + + if (q->ixp_q_acrd) { + auth_off = q->ixp_q_acrd->crd_skip; + auth_len = q->ixp_q_acrd->crd_len; + icv_off = q->ixp_q_acrd->crd_inject; + } + + crypt_off = q->ixp_q_ccrd->crd_skip; + crypt_len = q->ixp_q_ccrd->crd_len; + } else { /* if (q->ixp_q_acrd) */ + auth_off = q->ixp_q_acrd->crd_skip; + auth_len = q->ixp_q_acrd->crd_len; + icv_off = q->ixp_q_acrd->crd_inject; + } + + if (q->ixp_q_crp->crp_flags & CRYPTO_F_SKBUF) { + struct sk_buff *skb = (struct sk_buff *) q->ixp_q_crp->crp_buf; + if (skb_shinfo(skb)->nr_frags) { + /* + * DAVIDM fix this limitation one day by using + * a buffer pool and chaining, it is not currently + * needed for current user/kernel space acceleration + */ + printk("ixp: Cannot handle fragmented skb's yet !\n"); + q->ixp_q_crp->crp_etype = ENOENT; + goto done; + } + IX_MBUF_MLEN(&q->ixp_q_mbuf) = + IX_MBUF_PKT_LEN(&q->ixp_q_mbuf) = skb->len; + IX_MBUF_MDATA(&q->ixp_q_mbuf) = skb->data; + } else if (q->ixp_q_crp->crp_flags & CRYPTO_F_IOV) { + struct uio *uiop = (struct uio *) q->ixp_q_crp->crp_buf; + if (uiop->uio_iovcnt != 1) { + /* + * DAVIDM fix this limitation one day by using + * a buffer pool and chaining, it is not currently + * needed for current user/kernel space acceleration + */ + printk("ixp: Cannot handle more than 1 iovec yet !\n"); + q->ixp_q_crp->crp_etype = ENOENT; + goto done; + } + IX_MBUF_MLEN(&q->ixp_q_mbuf) = + IX_MBUF_PKT_LEN(&q->ixp_q_mbuf) = uiop->uio_iov[0].iov_len; + IX_MBUF_MDATA(&q->ixp_q_mbuf) = uiop->uio_iov[0].iov_base; + } else /* contig buffer */ { + IX_MBUF_MLEN(&q->ixp_q_mbuf) = + IX_MBUF_PKT_LEN(&q->ixp_q_mbuf) = q->ixp_q_crp->crp_ilen; + IX_MBUF_MDATA(&q->ixp_q_mbuf) = q->ixp_q_crp->crp_buf; + } + + IX_MBUF_PRIV(&q->ixp_q_mbuf) = q; + + if (ixp->ixp_auth_alg == CRYPTO_SHA1 || ixp->ixp_auth_alg == CRYPTO_MD5) { + /* + * For SHA1 and MD5 hash, need to create an internal buffer that is big + * enough to hold the original data + the appropriate padding for the + * hash algorithm. + */ + UINT8 *tbuf = NULL; + + IX_MBUF_MLEN(&q->ixp_q_mbuf) = IX_MBUF_PKT_LEN(&q->ixp_q_mbuf) = + ((IX_MBUF_MLEN(&q->ixp_q_mbuf) * 8) + 72 + 511) / 8; + tbuf = kmalloc(IX_MBUF_MLEN(&q->ixp_q_mbuf), SLAB_ATOMIC); + + if (IX_MBUF_MDATA(&q->ixp_q_mbuf) == NULL) { + printk("ixp: kmalloc(%u, SLAB_ATOMIC) failed\n", + IX_MBUF_MLEN(&q->ixp_q_mbuf)); + q->ixp_q_crp->crp_etype = ENOMEM; + goto done; + } + memcpy(tbuf, &(IX_MBUF_MDATA(&q->ixp_q_mbuf))[auth_off], auth_len); + + /* Set location in client buffer to copy hash into */ + q->ixp_hash_dest = + &(IX_MBUF_MDATA(&q->ixp_q_mbuf))[auth_off + auth_len]; + + IX_MBUF_MDATA(&q->ixp_q_mbuf) = tbuf; + + /* Set location in internal buffer for where hash starts */ + q->ixp_hash_src = &(IX_MBUF_MDATA(&q->ixp_q_mbuf))[auth_len]; + + crypt_func = "ixCryptoAccHashPerform"; + status = ixCryptoAccHashPerform(ixp->ixp_ctx.authCtx.authAlgo, + &q->ixp_q_mbuf, ixp_hash_perform_cb, 0, auth_len, auth_len, + &ixp->ixp_hash_key_id); + } + else { + crypt_func = "ixCryptoAccAuthCryptPerform"; + status = ixCryptoAccAuthCryptPerform(ixp->ixp_ctx_id, &q->ixp_q_mbuf, + NULL, auth_off, auth_len, crypt_off, crypt_len, icv_off, + q->ixp_q_iv); + } + + if (IX_CRYPTO_ACC_STATUS_SUCCESS == status) + return; + + if (IX_CRYPTO_ACC_STATUS_QUEUE_FULL == status) { + q->ixp_q_crp->crp_etype = ENOMEM; + goto done; + } + + printk("ixp: %s failed %u\n", crypt_func, status); + q->ixp_q_crp->crp_etype = EINVAL; + +done: + crypto_done(q->ixp_q_crp); + kmem_cache_free(qcache, q); +} + + +/* + * because we cannot process the Q from the Register callback + * we do it here on a task Q. + */ + +static void +ixp_process_pending(void *arg) +{ + struct ixp_data *ixp = arg; + struct ixp_q *q = NULL; + + dprintk("%s(%p)\n", __FUNCTION__, arg); + + if (!ixp) + return; + + while (!list_empty(&ixp->ixp_q)) { + q = list_entry(ixp->ixp_q.next, struct ixp_q, ixp_q_list); + list_del(&q->ixp_q_list); + ixp_q_process(q); + } +} + +#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20) +static void +ixp_process_pending_wq(struct work_struct *work) +{ + struct ixp_data *ixp = container_of(work, struct ixp_data, ixp_pending_work); + ixp_process_pending(ixp); +} +#endif + +/* + * callback for when context registration is complete + */ + +static void +ixp_register_cb(UINT32 ctx_id, IX_MBUF *bufp, IxCryptoAccStatus status) +{ + int i; + struct ixp_data *ixp; + struct ixp_q *q; + + dprintk("%s(%d, %p, %d)\n", __FUNCTION__, ctx_id, bufp, status); + + /* + * free any buffer passed in to this routine + */ + if (bufp) { + IX_MBUF_MLEN(bufp) = IX_MBUF_PKT_LEN(bufp) = 0; + kfree(IX_MBUF_MDATA(bufp)); + IX_MBUF_MDATA(bufp) = NULL; + } + + for (i = 0; i < ixp_sesnum; i++) { + ixp = ixp_sessions[i]; + if (ixp && ixp->ixp_ctx_id == ctx_id) + break; + } + if (i >= ixp_sesnum) { + printk("ixp: invalid context id %d\n", ctx_id); + return; + } + + if (IX_CRYPTO_ACC_STATUS_WAIT == status) { + /* this is normal to free the first of two buffers */ + dprintk("ixp: register not finished yet.\n"); + return; + } + + if (IX_CRYPTO_ACC_STATUS_SUCCESS != status) { + printk("ixp: register failed 0x%x\n", status); + while (!list_empty(&ixp->ixp_q)) { + q = list_entry(ixp->ixp_q.next, struct ixp_q, ixp_q_list); + list_del(&q->ixp_q_list); + q->ixp_q_crp->crp_etype = EINVAL; + crypto_done(q->ixp_q_crp); + kmem_cache_free(qcache, q); + } + return; + } + + /* + * we are now registered, we cannot start processing the Q here + * or we get strange errors with AES (DES/3DES seem to be ok). + */ + ixp->ixp_registered = 1; + schedule_work(&ixp->ixp_pending_work); +} + + +/* + * callback for when data processing is complete + */ + +static void +ixp_perform_cb( + UINT32 ctx_id, + IX_MBUF *sbufp, + IX_MBUF *dbufp, + IxCryptoAccStatus status) +{ + struct ixp_q *q; + + dprintk("%s(%d, %p, %p, 0x%x)\n", __FUNCTION__, ctx_id, sbufp, + dbufp, status); + + if (sbufp == NULL) { + printk("ixp: NULL sbuf in ixp_perform_cb\n"); + return; + } + + q = IX_MBUF_PRIV(sbufp); + if (q == NULL) { + printk("ixp: NULL priv in ixp_perform_cb\n"); + return; + } + + if (status != IX_CRYPTO_ACC_STATUS_SUCCESS) { + printk("ixp: perform failed status=%d\n", status); + q->ixp_q_crp->crp_etype = EINVAL; + } + + crypto_done(q->ixp_q_crp); + kmem_cache_free(qcache, q); +} + + +/* + * registration is not callable at IRQ time, so we defer + * to a task queue, this routines completes the registration for us + * when the task queue runs + * + * Unfortunately this means we cannot tell OCF that the driver is blocked, + * we do that on the next request. + */ + +static void +ixp_registration(void *arg) +{ + struct ixp_data *ixp = arg; + struct ixp_q *q = NULL; + IX_MBUF *pri = NULL, *sec = NULL; + int status = IX_CRYPTO_ACC_STATUS_SUCCESS; + + if (!ixp) { + printk("ixp: ixp_registration with no arg\n"); + return; + } + + if (ixp->ixp_ctx_id != -1) { + ixCryptoAccCtxUnregister(ixp->ixp_ctx_id); + ixp->ixp_ctx_id = -1; + } + + if (list_empty(&ixp->ixp_q)) { + printk("ixp: ixp_registration with no Q\n"); + return; + } + + /* + * setup the primary and secondary buffers + */ + q = list_entry(ixp->ixp_q.next, struct ixp_q, ixp_q_list); + if (q->ixp_q_acrd) { + pri = &ixp->ixp_pri_mbuf; + sec = &ixp->ixp_sec_mbuf; + IX_MBUF_MLEN(pri) = IX_MBUF_PKT_LEN(pri) = 128; + IX_MBUF_MDATA(pri) = (unsigned char *) kmalloc(128, SLAB_ATOMIC); + IX_MBUF_MLEN(sec) = IX_MBUF_PKT_LEN(sec) = 128; + IX_MBUF_MDATA(sec) = (unsigned char *) kmalloc(128, SLAB_ATOMIC); + } + + /* Only need to register if a crypt op or HMAC op */ + if (!(ixp->ixp_auth_alg == CRYPTO_SHA1 || + ixp->ixp_auth_alg == CRYPTO_MD5)) { + status = ixCryptoAccCtxRegister( + &ixp->ixp_ctx, + pri, sec, + ixp_register_cb, + ixp_perform_cb, + &ixp->ixp_ctx_id); + } + else { + /* Otherwise we start processing pending q */ + schedule_work(&ixp->ixp_pending_work); + } + + if (IX_CRYPTO_ACC_STATUS_SUCCESS == status) + return; + + if (IX_CRYPTO_ACC_STATUS_EXCEED_MAX_TUNNELS == status) { + printk("ixp: ixCryptoAccCtxRegister failed (out of tunnels)\n"); + ixp_blocked = 1; + /* perhaps we should return EGAIN on queued ops ? */ + return; + } + + printk("ixp: ixCryptoAccCtxRegister failed %d\n", status); + ixp->ixp_ctx_id = -1; + + /* + * everything waiting is toasted + */ + while (!list_empty(&ixp->ixp_q)) { + q = list_entry(ixp->ixp_q.next, struct ixp_q, ixp_q_list); + list_del(&q->ixp_q_list); + q->ixp_q_crp->crp_etype = ENOENT; + crypto_done(q->ixp_q_crp); + kmem_cache_free(qcache, q); + } +} + +#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20) +static void +ixp_registration_wq(struct work_struct *work) +{ + struct ixp_data *ixp = container_of(work, struct ixp_data, + ixp_registration_work); + ixp_registration(ixp); +} +#endif + +/* + * Process a request. + */ +static int +ixp_process(device_t dev, struct cryptop *crp, int hint) +{ + struct ixp_data *ixp; + unsigned int lid; + struct ixp_q *q = NULL; + int status; + + dprintk("%s()\n", __FUNCTION__); + + /* Sanity check */ + if (crp == NULL) { + dprintk("%s,%d: EINVAL\n", __FILE__, __LINE__); + return EINVAL; + } + + crp->crp_etype = 0; + + if (ixp_blocked) + return ERESTART; + + if (crp->crp_desc == NULL || crp->crp_buf == NULL) { + dprintk("%s,%d: EINVAL\n", __FILE__, __LINE__); + crp->crp_etype = EINVAL; + goto done; + } + + /* + * find the session we are using + */ + + lid = crp->crp_sid & 0xffffffff; + if (lid >= ixp_sesnum || lid == 0 || ixp_sessions == NULL || + ixp_sessions[lid] == NULL) { + crp->crp_etype = ENOENT; + dprintk("%s,%d: ENOENT\n", __FILE__, __LINE__); + goto done; + } + ixp = ixp_sessions[lid]; + + /* + * setup a new request ready for queuing + */ + q = kmem_cache_alloc(qcache, SLAB_ATOMIC); + if (q == NULL) { + dprintk("%s,%d: ENOMEM\n", __FILE__, __LINE__); + crp->crp_etype = ENOMEM; + goto done; + } + /* + * save some cycles by only zeroing the important bits + */ + memset(&q->ixp_q_mbuf, 0, sizeof(q->ixp_q_mbuf)); + q->ixp_q_ccrd = NULL; + q->ixp_q_acrd = NULL; + q->ixp_q_crp = crp; + q->ixp_q_data = ixp; + + /* + * point the cipher and auth descriptors appropriately + * check that we have something to do + */ + if (crp->crp_desc->crd_alg == ixp->ixp_cipher_alg) + q->ixp_q_ccrd = crp->crp_desc; + else if (crp->crp_desc->crd_alg == ixp->ixp_auth_alg) + q->ixp_q_acrd = crp->crp_desc; + else { + crp->crp_etype = ENOENT; + dprintk("%s,%d: bad desc match: ENOENT\n", __FILE__, __LINE__); + goto done; + } + if (crp->crp_desc->crd_next) { + if (crp->crp_desc->crd_next->crd_alg == ixp->ixp_cipher_alg) + q->ixp_q_ccrd = crp->crp_desc->crd_next; + else if (crp->crp_desc->crd_next->crd_alg == ixp->ixp_auth_alg) + q->ixp_q_acrd = crp->crp_desc->crd_next; + else { + crp->crp_etype = ENOENT; + dprintk("%s,%d: bad desc match: ENOENT\n", __FILE__, __LINE__); + goto done; + } + } + + /* + * If there is a direction change for this context then we mark it as + * unregistered and re-register is for the new direction. This is not + * a very expensive operation and currently only tends to happen when + * user-space application are doing benchmarks + * + * DM - we should be checking for pending requests before unregistering. + */ + if (q->ixp_q_ccrd && ixp->ixp_registered && + ixp->ixp_crd_flags != (q->ixp_q_ccrd->crd_flags & CRD_F_ENCRYPT)) { + dprintk("%s - detected direction change on session\n", __FUNCTION__); + ixp->ixp_registered = 0; + } + + /* + * if we are registered, call straight into the perform code + */ + if (ixp->ixp_registered) { + ixp_q_process(q); + return 0; + } + + /* + * the only part of the context not set in newsession is the direction + * dependent parts + */ + if (q->ixp_q_ccrd) { + ixp->ixp_crd_flags = (q->ixp_q_ccrd->crd_flags & CRD_F_ENCRYPT); + if (q->ixp_q_ccrd->crd_flags & CRD_F_ENCRYPT) { + ixp->ixp_ctx.operation = q->ixp_q_acrd ? + IX_CRYPTO_ACC_OP_ENCRYPT_AUTH : IX_CRYPTO_ACC_OP_ENCRYPT; + } else { + ixp->ixp_ctx.operation = q->ixp_q_acrd ? + IX_CRYPTO_ACC_OP_AUTH_DECRYPT : IX_CRYPTO_ACC_OP_DECRYPT; + } + } else { + /* q->ixp_q_acrd must be set if we are here */ + ixp->ixp_ctx.operation = IX_CRYPTO_ACC_OP_AUTH_CALC; + } + + status = list_empty(&ixp->ixp_q); + list_add_tail(&q->ixp_q_list, &ixp->ixp_q); + if (status) + schedule_work(&ixp->ixp_registration_work); + return 0; + +done: + if (q) + kmem_cache_free(qcache, q); + crypto_done(crp); + return 0; +} + + +#ifdef __ixp46X +/* + * key processing support for the ixp465 + */ + + +/* + * copy a BN (LE) into a buffer (BE) an fill out the op appropriately + * assume zeroed and only copy bits that are significant + */ + +static int +ixp_copy_ibuf(struct crparam *p, IxCryptoAccPkeEauOperand *op, UINT32 *buf) +{ + unsigned char *src = (unsigned char *) p->crp_p; + unsigned char *dst; + int len, bits = p->crp_nbits; + + dprintk("%s()\n", __FUNCTION__); + + if (bits > MAX_IOP_SIZE * sizeof(UINT32) * 8) { + dprintk("%s - ibuf too big (%d > %d)\n", __FUNCTION__, + bits, MAX_IOP_SIZE * sizeof(UINT32) * 8); + return -1; + } + + len = (bits + 31) / 32; /* the number UINT32's needed */ + + dst = (unsigned char *) &buf[len]; + dst--; + + while (bits > 0) { + *dst-- = *src++; + bits -= 8; + } + +#if 0 /* no need to zero remaining bits as it is done during request alloc */ + while (dst > (unsigned char *) buf) + *dst-- = '\0'; +#endif + + op->pData = buf; + op->dataLen = len; + return 0; +} + +/* + * copy out the result, be as forgiving as we can about small output buffers + */ + +static int +ixp_copy_obuf(struct crparam *p, IxCryptoAccPkeEauOpResult *op, UINT32 *buf) +{ + unsigned char *dst = (unsigned char *) p->crp_p; + unsigned char *src = (unsigned char *) buf; + int len, z, bits = p->crp_nbits; + + dprintk("%s()\n", __FUNCTION__); + + len = op->dataLen * sizeof(UINT32); + + /* skip leading zeroes to be small buffer friendly */ + z = 0; + while (z < len && src[z] == '\0') + z++; + + src += len; + src--; + len -= z; + + while (len > 0 && bits > 0) { + *dst++ = *src--; + len--; + bits -= 8; + } + + while (bits > 0) { + *dst++ = '\0'; + bits -= 8; + } + + if (len > 0) { + dprintk("%s - obuf is %d (z=%d, ob=%d) bytes too small\n", + __FUNCTION__, len, z, p->crp_nbits / 8); + return -1; + } + + return 0; +} + + +/* + * the parameter offsets for exp_mod + */ + +#define IXP_PARAM_BASE 0 +#define IXP_PARAM_EXP 1 +#define IXP_PARAM_MOD 2 +#define IXP_PARAM_RES 3 + +/* + * key processing complete callback, is also used to start processing + * by passing a NULL for pResult + */ + +static void +ixp_kperform_cb( + IxCryptoAccPkeEauOperation operation, + IxCryptoAccPkeEauOpResult *pResult, + BOOL carryOrBorrow, + IxCryptoAccStatus status) +{ + struct ixp_pkq *q, *tmp; + unsigned long flags; + + dprintk("%s(0x%x, %p, %d, 0x%x)\n", __FUNCTION__, operation, pResult, + carryOrBorrow, status); + + /* handle a completed request */ + if (pResult) { + if (ixp_pk_cur && &ixp_pk_cur->pkq_result == pResult) { + q = ixp_pk_cur; + if (status != IX_CRYPTO_ACC_STATUS_SUCCESS) { + dprintk("%s() - op failed 0x%x\n", __FUNCTION__, status); + q->pkq_krp->krp_status = ERANGE; /* could do better */ + } else { + /* copy out the result */ + if (ixp_copy_obuf(&q->pkq_krp->krp_param[IXP_PARAM_RES], + &q->pkq_result, q->pkq_obuf)) + q->pkq_krp->krp_status = ERANGE; + } + crypto_kdone(q->pkq_krp); + kfree(q); + ixp_pk_cur = NULL; + } else + printk("%s - callback with invalid result pointer\n", __FUNCTION__); + } + + spin_lock_irqsave(&ixp_pkq_lock, flags); + if (ixp_pk_cur || list_empty(&ixp_pkq)) { + spin_unlock_irqrestore(&ixp_pkq_lock, flags); + return; + } + + list_for_each_entry_safe(q, tmp, &ixp_pkq, pkq_list) { + + list_del(&q->pkq_list); + ixp_pk_cur = q; + + spin_unlock_irqrestore(&ixp_pkq_lock, flags); + + status = ixCryptoAccPkeEauPerform( + IX_CRYPTO_ACC_OP_EAU_MOD_EXP, + &q->pkq_op, + ixp_kperform_cb, + &q->pkq_result); + + if (status == IX_CRYPTO_ACC_STATUS_SUCCESS) { + dprintk("%s() - ixCryptoAccPkeEauPerform SUCCESS\n", __FUNCTION__); + return; /* callback will return here for callback */ + } else if (status == IX_CRYPTO_ACC_STATUS_RETRY) { + printk("%s() - ixCryptoAccPkeEauPerform RETRY\n", __FUNCTION__); + } else { + printk("%s() - ixCryptoAccPkeEauPerform failed %d\n", + __FUNCTION__, status); + } + q->pkq_krp->krp_status = ERANGE; /* could do better */ + crypto_kdone(q->pkq_krp); + kfree(q); + spin_lock_irqsave(&ixp_pkq_lock, flags); + } + spin_unlock_irqrestore(&ixp_pkq_lock, flags); +} + + +static int +ixp_kprocess(device_t dev, struct cryptkop *krp, int hint) +{ + struct ixp_pkq *q; + int rc = 0; + unsigned long flags; + + dprintk("%s l1=%d l2=%d l3=%d l4=%d\n", __FUNCTION__, + krp->krp_param[IXP_PARAM_BASE].crp_nbits, + krp->krp_param[IXP_PARAM_EXP].crp_nbits, + krp->krp_param[IXP_PARAM_MOD].crp_nbits, + krp->krp_param[IXP_PARAM_RES].crp_nbits); + + + if (krp->krp_op != CRK_MOD_EXP) { + krp->krp_status = EOPNOTSUPP; + goto err; + } + + q = (struct ixp_pkq *) kmalloc(sizeof(*q), GFP_KERNEL); + if (q == NULL) { + krp->krp_status = ENOMEM; + goto err; + } + + /* + * The PKE engine does not appear to zero the output buffer + * appropriately, so we need to do it all here. + */ + memset(q, 0, sizeof(*q)); + + q->pkq_krp = krp; + INIT_LIST_HEAD(&q->pkq_list); + + if (ixp_copy_ibuf(&krp->krp_param[IXP_PARAM_BASE], &q->pkq_op.modExpOpr.M, + q->pkq_ibuf0)) + rc = 1; + if (!rc && ixp_copy_ibuf(&krp->krp_param[IXP_PARAM_EXP], + &q->pkq_op.modExpOpr.e, q->pkq_ibuf1)) + rc = 2; + if (!rc && ixp_copy_ibuf(&krp->krp_param[IXP_PARAM_MOD], + &q->pkq_op.modExpOpr.N, q->pkq_ibuf2)) + rc = 3; + + if (rc) { + kfree(q); + krp->krp_status = ERANGE; + goto err; + } + + q->pkq_result.pData = q->pkq_obuf; + q->pkq_result.dataLen = + (krp->krp_param[IXP_PARAM_RES].crp_nbits + 31) / 32; + + spin_lock_irqsave(&ixp_pkq_lock, flags); + list_add_tail(&q->pkq_list, &ixp_pkq); + spin_unlock_irqrestore(&ixp_pkq_lock, flags); + + if (!ixp_pk_cur) + ixp_kperform_cb(0, NULL, 0, 0); + return (0); + +err: + crypto_kdone(krp); + return (0); +} + + + +#ifdef CONFIG_OCF_RANDOMHARVEST +/* + * We run the random number generator output through SHA so that it + * is FIPS compliant. + */ + +static volatile int sha_done = 0; +static unsigned char sha_digest[20]; + +static void +ixp_hash_cb(UINT8 *digest, IxCryptoAccStatus status) +{ + dprintk("%s(%p, %d)\n", __FUNCTION__, digest, status); + if (sha_digest != digest) + printk("digest error\n"); + if (IX_CRYPTO_ACC_STATUS_SUCCESS == status) + sha_done = 1; + else + sha_done = -status; +} + +static int +ixp_read_random(void *arg, u_int32_t *buf, int maxwords) +{ + IxCryptoAccStatus status; + int i, n, rc; + + dprintk("%s(%p, %d)\n", __FUNCTION__, buf, maxwords); + memset(buf, 0, maxwords * sizeof(*buf)); + status = ixCryptoAccPkePseudoRandomNumberGet(maxwords, buf); + if (status != IX_CRYPTO_ACC_STATUS_SUCCESS) { + dprintk("%s: ixCryptoAccPkePseudoRandomNumberGet failed %d\n", + __FUNCTION__, status); + return 0; + } + + /* + * run the random data through SHA to make it look more random + */ + + n = sizeof(sha_digest); /* process digest bytes at a time */ + + rc = 0; + for (i = 0; i < maxwords; i += n / sizeof(*buf)) { + if ((maxwords - i) * sizeof(*buf) < n) + n = (maxwords - i) * sizeof(*buf); + sha_done = 0; + status = ixCryptoAccPkeHashPerform(IX_CRYPTO_ACC_AUTH_SHA1, + (UINT8 *) &buf[i], n, ixp_hash_cb, sha_digest); + if (status != IX_CRYPTO_ACC_STATUS_SUCCESS) { + dprintk("ixCryptoAccPkeHashPerform failed %d\n", status); + return -EIO; + } + while (!sha_done) + schedule(); + if (sha_done < 0) { + dprintk("ixCryptoAccPkeHashPerform failed CB %d\n", -sha_done); + return 0; + } + memcpy(&buf[i], sha_digest, n); + rc += n / sizeof(*buf);; + } + + return rc; +} +#endif /* CONFIG_OCF_RANDOMHARVEST */ + +#endif /* __ixp46X */ + + + +/* + * our driver startup and shutdown routines + */ + +static int +ixp_init(void) +{ + dprintk("%s(%p)\n", __FUNCTION__, ixp_init); + + if (ixp_init_crypto && ixCryptoAccInit() != IX_CRYPTO_ACC_STATUS_SUCCESS) + printk("ixCryptoAccInit failed, assuming already initialised!\n"); + + qcache = kmem_cache_create("ixp4xx_q", sizeof(struct ixp_q), 0, + SLAB_HWCACHE_ALIGN, NULL +#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,23) + , NULL +#endif + ); + if (!qcache) { + printk("failed to create Qcache\n"); + return -ENOENT; + } + + memset(&ixpdev, 0, sizeof(ixpdev)); + softc_device_init(&ixpdev, "ixp4xx", 0, ixp_methods); + + ixp_id = crypto_get_driverid(softc_get_device(&ixpdev), + CRYPTOCAP_F_HARDWARE); + if (ixp_id < 0) + panic("IXP/OCF crypto device cannot initialize!"); + +#define REGISTER(alg) \ + crypto_register(ixp_id,alg,0,0) + + REGISTER(CRYPTO_DES_CBC); + REGISTER(CRYPTO_3DES_CBC); + REGISTER(CRYPTO_RIJNDAEL128_CBC); +#ifdef CONFIG_OCF_IXP4XX_SHA1_MD5 + REGISTER(CRYPTO_MD5); + REGISTER(CRYPTO_SHA1); +#endif + REGISTER(CRYPTO_MD5_HMAC); + REGISTER(CRYPTO_SHA1_HMAC); +#undef REGISTER + +#ifdef __ixp46X + spin_lock_init(&ixp_pkq_lock); + /* + * we do not enable the go fast options here as they can potentially + * allow timing based attacks + * + * http://www.openssl.org/news/secadv_20030219.txt + */ + ixCryptoAccPkeEauExpConfig(0, 0); + crypto_kregister(ixp_id, CRK_MOD_EXP, 0); +#ifdef CONFIG_OCF_RANDOMHARVEST + crypto_rregister(ixp_id, ixp_read_random, NULL); +#endif +#endif + + return 0; +} + +static void +ixp_exit(void) +{ + dprintk("%s()\n", __FUNCTION__); + crypto_unregister_all(ixp_id); + ixp_id = -1; + kmem_cache_destroy(qcache); + qcache = NULL; +} + +module_init(ixp_init); +module_exit(ixp_exit); + +MODULE_LICENSE("Dual BSD/GPL"); +MODULE_AUTHOR("David McCullough "); +MODULE_DESCRIPTION("ixp (OCF module for IXP4xx crypto)"); diff --git a/target/linux/generic-2.4/files/crypto/ocf/kirkwood/Makefile b/target/linux/generic-2.4/files/crypto/ocf/kirkwood/Makefile new file mode 100644 index 0000000000..6dafd0048a --- /dev/null +++ b/target/linux/generic-2.4/files/crypto/ocf/kirkwood/Makefile @@ -0,0 +1,19 @@ +# for SGlinux builds +-include $(ROOTDIR)/modules/.config + +obj-$(CONFIG_OCF_KIRKWOOD) += mv_cesa.o + +mv_cesa-y := cesa/mvCesa.o cesa/mvLru.o cesa/mvMD5.o cesa/mvSHA1.o cesa/AES/mvAesAlg.o cesa/AES/mvAesApi.o cesa/mvCesaDebug.o cesa_ocf_drv.o + +# Extra objects required by the CESA driver +mv_cesa-y += mvHal/kw_family/ctrlEnv/mvCtrlEnvLib.o mvHal/kw_family/boardEnv/mvBoardEnvLib.o mvHal/mv_hal/twsi/mvTwsi.o mvHal/kw_family/ctrlEnv/sys/mvCpuIf.o mvHal/kw_family/ctrlEnv/sys/mvAhbToMbus.o mvHal/kw_family/ctrlEnv/sys/mvSysDram.o mvHal/linux_oss/mvOs.o mvHal/kw_family/ctrlEnv/mvCtrlEnvAddrDec.o mvHal/mv_hal/gpp/mvGpp.o mvHal/kw_family/ctrlEnv/sys/mvSysPex.o mvHal/mv_hal/pex/mvPex.o mvHal/kw_family/boardEnv/mvBoardEnvSpec.o mvHal/common/mvCommon.o mvHal/common/mvDebug.o mvHal/kw_family/ctrlEnv/sys/mvSysCesa.o + +ifdef src +EXTRA_CFLAGS += -I$(src)/.. -I$(src)/cesa -I$(src)/mvHal -I$(src)/mvHal/common -I$(src)/mvHal/kw_family -I$(src)/mvHal/mv_hal -I$(src)/mvHal/linux_oss -I$(src) +endif + +EXTRA_CFLAGS += -DMV_LINUX -DMV_CPU_LE -DMV_ARM -DMV_INCLUDE_CESA -DMV_INCLUDE_PEX -DMV_CACHE_COHERENCY=3 +ifdef TOPDIR +-include $(TOPDIR)/Rules.make +endif + diff --git a/target/linux/generic-2.4/files/crypto/ocf/kirkwood/cesa/AES/mvAes.h b/target/linux/generic-2.4/files/crypto/ocf/kirkwood/cesa/AES/mvAes.h new file mode 100644 index 0000000000..07a8601f82 --- /dev/null +++ b/target/linux/generic-2.4/files/crypto/ocf/kirkwood/cesa/AES/mvAes.h @@ -0,0 +1,62 @@ +/* mvAes.h v2.0 August '99 + * Reference ANSI C code + */ + +/* AES Cipher header file for ANSI C Submissions + Lawrence E. Bassham III + Computer Security Division + National Institute of Standards and Technology + + April 15, 1998 + + This sample is to assist implementers developing to the Cryptographic +API Profile for AES Candidate Algorithm Submissions. Please consult this +document as a cross-reference. + + ANY CHANGES, WHERE APPROPRIATE, TO INFORMATION PROVIDED IN THIS FILE +MUST BE DOCUMENTED. CHANGES ARE ONLY APPROPRIATE WHERE SPECIFIED WITH +THE STRING "CHANGE POSSIBLE". FUNCTION CALLS AND THEIR PARAMETERS CANNOT +BE CHANGED. STRUCTURES CAN BE ALTERED TO ALLOW IMPLEMENTERS TO INCLUDE +IMPLEMENTATION SPECIFIC INFORMATION. +*/ + +/* Includes: + Standard include files +*/ + +#include "mvOs.h" + + +/* Error Codes - CHANGE POSSIBLE: inclusion of additional error codes */ + +/* Key direction is invalid, e.g., unknown value */ +#define AES_BAD_KEY_DIR -1 + +/* Key material not of correct length */ +#define AES_BAD_KEY_MAT -2 + +/* Key passed is not valid */ +#define AES_BAD_KEY_INSTANCE -3 + +/* Params struct passed to cipherInit invalid */ +#define AES_BAD_CIPHER_MODE -4 + +/* Cipher in wrong state (e.g., not initialized) */ +#define AES_BAD_CIPHER_STATE -5 + +#define AES_BAD_CIPHER_INSTANCE -7 + + +/* Function protoypes */ +/* CHANGED: makeKey(): parameter blockLen added + this parameter is absolutely necessary if you want to + setup the round keys in a variable block length setting + cipherInit(): parameter blockLen added (for obvious reasons) + */ +int aesMakeKey(MV_U8 *expandedKey, MV_U8 *keyMaterial, int keyLen, int blockLen); +int aesBlockEncrypt128(MV_U8 mode, MV_U8 *IV, MV_U8 *expandedKey, int keyLen, + MV_U32 *plain, int numBlocks, MV_U32 *cipher); +int aesBlockDecrypt128(MV_U8 mode, MV_U8 *IV, MV_U8 *expandedKey, int keyLen, + MV_U32 *plain, int numBlocks, MV_U32 *cipher); + + diff --git a/target/linux/generic-2.4/files/crypto/ocf/kirkwood/cesa/AES/mvAesAlg.c b/target/linux/generic-2.4/files/crypto/ocf/kirkwood/cesa/AES/mvAesAlg.c new file mode 100644 index 0000000000..a65dc28932 --- /dev/null +++ b/target/linux/generic-2.4/files/crypto/ocf/kirkwood/cesa/AES/mvAesAlg.c @@ -0,0 +1,317 @@ +/* rijndael-alg-ref.c v2.0 August '99 + * Reference ANSI C code + * authors: Paulo Barreto + * Vincent Rijmen, K.U.Leuven + * + * This code is placed in the public domain. + */ + +#include "mvOs.h" + +#include "mvAesAlg.h" + +#include "mvAesBoxes.dat" + + +MV_U8 mul1(MV_U8 aa, MV_U8 bb); +void KeyAddition(MV_U8 a[4][MAXBC], MV_U8 rk[4][MAXBC], MV_U8 BC); +void ShiftRow128Enc(MV_U8 a[4][MAXBC]); +void ShiftRow128Dec(MV_U8 a[4][MAXBC]); +void Substitution(MV_U8 a[4][MAXBC], MV_U8 box[256]); +void MixColumn(MV_U8 a[4][MAXBC], MV_U8 rk[4][MAXBC]); +void InvMixColumn(MV_U8 a[4][MAXBC]); + + +#define mul(aa, bb) (mask[bb] & Alogtable[aa + Logtable[bb]]) + +MV_U8 mul1(MV_U8 aa, MV_U8 bb) +{ + return mask[bb] & Alogtable[aa + Logtable[bb]]; +} + + +void KeyAddition(MV_U8 a[4][MAXBC], MV_U8 rk[4][MAXBC], MV_U8 BC) +{ + /* Exor corresponding text input and round key input bytes + */ + ((MV_U32*)(&(a[0][0])))[0] ^= ((MV_U32*)(&(rk[0][0])))[0]; + ((MV_U32*)(&(a[1][0])))[0] ^= ((MV_U32*)(&(rk[1][0])))[0]; + ((MV_U32*)(&(a[2][0])))[0] ^= ((MV_U32*)(&(rk[2][0])))[0]; + ((MV_U32*)(&(a[3][0])))[0] ^= ((MV_U32*)(&(rk[3][0])))[0]; + +} + +void ShiftRow128Enc(MV_U8 a[4][MAXBC]) { + /* Row 0 remains unchanged + * The other three rows are shifted a variable amount + */ + MV_U8 tmp[MAXBC]; + + tmp[0] = a[1][1]; + tmp[1] = a[1][2]; + tmp[2] = a[1][3]; + tmp[3] = a[1][0]; + + ((MV_U32*)(&(a[1][0])))[0] = ((MV_U32*)(&(tmp[0])))[0]; + /* + a[1][0] = tmp[0]; + a[1][1] = tmp[1]; + a[1][2] = tmp[2]; + a[1][3] = tmp[3]; + */ + tmp[0] = a[2][2]; + tmp[1] = a[2][3]; + tmp[2] = a[2][0]; + tmp[3] = a[2][1]; + + ((MV_U32*)(&(a[2][0])))[0] = ((MV_U32*)(&(tmp[0])))[0]; + /* + a[2][0] = tmp[0]; + a[2][1] = tmp[1]; + a[2][2] = tmp[2]; + a[2][3] = tmp[3]; + */ + tmp[0] = a[3][3]; + tmp[1] = a[3][0]; + tmp[2] = a[3][1]; + tmp[3] = a[3][2]; + + ((MV_U32*)(&(a[3][0])))[0] = ((MV_U32*)(&(tmp[0])))[0]; + /* + a[3][0] = tmp[0]; + a[3][1] = tmp[1]; + a[3][2] = tmp[2]; + a[3][3] = tmp[3]; + */ +} + +void ShiftRow128Dec(MV_U8 a[4][MAXBC]) { + /* Row 0 remains unchanged + * The other three rows are shifted a variable amount + */ + MV_U8 tmp[MAXBC]; + + tmp[0] = a[1][3]; + tmp[1] = a[1][0]; + tmp[2] = a[1][1]; + tmp[3] = a[1][2]; + + ((MV_U32*)(&(a[1][0])))[0] = ((MV_U32*)(&(tmp[0])))[0]; + /* + a[1][0] = tmp[0]; + a[1][1] = tmp[1]; + a[1][2] = tmp[2]; + a[1][3] = tmp[3]; + */ + + tmp[0] = a[2][2]; + tmp[1] = a[2][3]; + tmp[2] = a[2][0]; + tmp[3] = a[2][1]; + + ((MV_U32*)(&(a[2][0])))[0] = ((MV_U32*)(&(tmp[0])))[0]; + /* + a[2][0] = tmp[0]; + a[2][1] = tmp[1]; + a[2][2] = tmp[2]; + a[2][3] = tmp[3]; + */ + + tmp[0] = a[3][1]; + tmp[1] = a[3][2]; + tmp[2] = a[3][3]; + tmp[3] = a[3][0]; + + ((MV_U32*)(&(a[3][0])))[0] = ((MV_U32*)(&(tmp[0])))[0]; + /* + a[3][0] = tmp[0]; + a[3][1] = tmp[1]; + a[3][2] = tmp[2]; + a[3][3] = tmp[3]; + */ +} + +void Substitution(MV_U8 a[4][MAXBC], MV_U8 box[256]) { + /* Replace every byte of the input by the byte at that place + * in the nonlinear S-box + */ + int i, j; + + for(i = 0; i < 4; i++) + for(j = 0; j < 4; j++) a[i][j] = box[a[i][j]] ; +} + +void MixColumn(MV_U8 a[4][MAXBC], MV_U8 rk[4][MAXBC]) { + /* Mix the four bytes of every column in a linear way + */ + MV_U8 b[4][MAXBC]; + int i, j; + + for(j = 0; j < 4; j++){ + b[0][j] = mul(25,a[0][j]) ^ mul(1,a[1][j]) ^ a[2][j] ^ a[3][j]; + b[1][j] = mul(25,a[1][j]) ^ mul(1,a[2][j]) ^ a[3][j] ^ a[0][j]; + b[2][j] = mul(25,a[2][j]) ^ mul(1,a[3][j]) ^ a[0][j] ^ a[1][j]; + b[3][j] = mul(25,a[3][j]) ^ mul(1,a[0][j]) ^ a[1][j] ^ a[2][j]; + } + for(i = 0; i < 4; i++) + /*for(j = 0; j < BC; j++) a[i][j] = b[i][j];*/ + ((MV_U32*)(&(a[i][0])))[0] = ((MV_U32*)(&(b[i][0])))[0] ^ ((MV_U32*)(&(rk[i][0])))[0];; +} + +void InvMixColumn(MV_U8 a[4][MAXBC]) { + /* Mix the four bytes of every column in a linear way + * This is the opposite operation of Mixcolumn + */ + MV_U8 b[4][MAXBC]; + int i, j; + + for(j = 0; j < 4; j++){ + b[0][j] = mul(223,a[0][j]) ^ mul(104,a[1][j]) ^ mul(238,a[2][j]) ^ mul(199,a[3][j]); + b[1][j] = mul(223,a[1][j]) ^ mul(104,a[2][j]) ^ mul(238,a[3][j]) ^ mul(199,a[0][j]); + b[2][j] = mul(223,a[2][j]) ^ mul(104,a[3][j]) ^ mul(238,a[0][j]) ^ mul(199,a[1][j]); + b[3][j] = mul(223,a[3][j]) ^ mul(104,a[0][j]) ^ mul(238,a[1][j]) ^ mul(199,a[2][j]); + } + for(i = 0; i < 4; i++) + /*for(j = 0; j < BC; j++) a[i][j] = b[i][j];*/ + ((MV_U32*)(&(a[i][0])))[0] = ((MV_U32*)(&(b[i][0])))[0]; +} + +int rijndaelKeySched (MV_U8 k[4][MAXKC], int keyBits, int blockBits, MV_U8 W[MAXROUNDS+1][4][MAXBC]) +{ + /* Calculate the necessary round keys + * The number of calculations depends on keyBits and blockBits + */ + int KC, BC, ROUNDS; + int i, j, t, rconpointer = 0; + MV_U8 tk[4][MAXKC]; + + switch (keyBits) { + case 128: KC = 4; break; + case 192: KC = 6; break; + case 256: KC = 8; break; + default : return (-1); + } + + switch (blockBits) { + case 128: BC = 4; break; + case 192: BC = 6; break; + case 256: BC = 8; break; + default : return (-2); + } + + switch (keyBits >= blockBits ? keyBits : blockBits) { + case 128: ROUNDS = 10; break; + case 192: ROUNDS = 12; break; + case 256: ROUNDS = 14; break; + default : return (-3); /* this cannot happen */ + } + + + for(j = 0; j < KC; j++) + for(i = 0; i < 4; i++) + tk[i][j] = k[i][j]; + t = 0; + /* copy values into round key array */ + for(j = 0; (j < KC) && (t < (ROUNDS+1)*BC); j++, t++) + for(i = 0; i < 4; i++) W[t / BC][i][t % BC] = tk[i][j]; + + while (t < (ROUNDS+1)*BC) { /* while not enough round key material calculated */ + /* calculate new values */ + for(i = 0; i < 4; i++) + tk[i][0] ^= S[tk[(i+1)%4][KC-1]]; + tk[0][0] ^= rcon[rconpointer++]; + + if (KC != 8) + for(j = 1; j < KC; j++) + for(i = 0; i < 4; i++) tk[i][j] ^= tk[i][j-1]; + else { + for(j = 1; j < KC/2; j++) + for(i = 0; i < 4; i++) tk[i][j] ^= tk[i][j-1]; + for(i = 0; i < 4; i++) tk[i][KC/2] ^= S[tk[i][KC/2 - 1]]; + for(j = KC/2 + 1; j < KC; j++) + for(i = 0; i < 4; i++) tk[i][j] ^= tk[i][j-1]; + } + /* copy values into round key array */ + for(j = 0; (j < KC) && (t < (ROUNDS+1)*BC); j++, t++) + for(i = 0; i < 4; i++) W[t / BC][i][t % BC] = tk[i][j]; + } + + return 0; +} + + + +int rijndaelEncrypt128(MV_U8 a[4][MAXBC], MV_U8 rk[MAXROUNDS+1][4][MAXBC], int rounds) +{ + /* Encryption of one block. + */ + int r, BC, ROUNDS; + + BC = 4; + ROUNDS = rounds; + + /* begin with a key addition + */ + + KeyAddition(a,rk[0],BC); + + /* ROUNDS-1 ordinary rounds + */ + for(r = 1; r < ROUNDS; r++) { + Substitution(a,S); + ShiftRow128Enc(a); + MixColumn(a, rk[r]); + /*KeyAddition(a,rk[r],BC);*/ + } + + /* Last round is special: there is no MixColumn + */ + Substitution(a,S); + ShiftRow128Enc(a); + KeyAddition(a,rk[ROUNDS],BC); + + return 0; +} + + +int rijndaelDecrypt128(MV_U8 a[4][MAXBC], MV_U8 rk[MAXROUNDS+1][4][MAXBC], int rounds) +{ + int r, BC, ROUNDS; + + BC = 4; + ROUNDS = rounds; + + /* To decrypt: apply the inverse operations of the encrypt routine, + * in opposite order + * + * (KeyAddition is an involution: it 's equal to its inverse) + * (the inverse of Substitution with table S is Substitution with the inverse table of S) + * (the inverse of Shiftrow is Shiftrow over a suitable distance) + */ + + /* First the special round: + * without InvMixColumn + * with extra KeyAddition + */ + KeyAddition(a,rk[ROUNDS],BC); + ShiftRow128Dec(a); + Substitution(a,Si); + + /* ROUNDS-1 ordinary rounds + */ + for(r = ROUNDS-1; r > 0; r--) { + KeyAddition(a,rk[r],BC); + InvMixColumn(a); + ShiftRow128Dec(a); + Substitution(a,Si); + + } + + /* End with the extra key addition + */ + + KeyAddition(a,rk[0],BC); + + return 0; +} + diff --git a/target/linux/generic-2.4/files/crypto/ocf/kirkwood/cesa/AES/mvAesAlg.h b/target/linux/generic-2.4/files/crypto/ocf/kirkwood/cesa/AES/mvAesAlg.h new file mode 100644 index 0000000000..ec81e403fa --- /dev/null +++ b/target/linux/generic-2.4/files/crypto/ocf/kirkwood/cesa/AES/mvAesAlg.h @@ -0,0 +1,19 @@ +/* rijndael-alg-ref.h v2.0 August '99 + * Reference ANSI C code + * authors: Paulo Barreto + * Vincent Rijmen, K.U.Leuven + */ +#ifndef __RIJNDAEL_ALG_H +#define __RIJNDAEL_ALG_H + +#define MAXBC (128/32) +#define MAXKC (256/32) +#define MAXROUNDS 14 + + +int rijndaelKeySched (MV_U8 k[4][MAXKC], int keyBits, int blockBits, MV_U8 rk[MAXROUNDS+1][4][MAXBC]); + +int rijndaelEncrypt128(MV_U8 a[4][MAXBC], MV_U8 rk[MAXROUNDS+1][4][MAXBC], int rounds); +int rijndaelDecrypt128(MV_U8 a[4][MAXBC], MV_U8 rk[MAXROUNDS+1][4][MAXBC], int rounds); + +#endif /* __RIJNDAEL_ALG_H */ diff --git a/target/linux/generic-2.4/files/crypto/ocf/kirkwood/cesa/AES/mvAesApi.c b/target/linux/generic-2.4/files/crypto/ocf/kirkwood/cesa/AES/mvAesApi.c new file mode 100644 index 0000000000..b432dc6e66 --- /dev/null +++ b/target/linux/generic-2.4/files/crypto/ocf/kirkwood/cesa/AES/mvAesApi.c @@ -0,0 +1,312 @@ +/* rijndael-api-ref.c v2.1 April 2000 + * Reference ANSI C code + * authors: v2.0 Paulo Barreto + * Vincent Rijmen, K.U.Leuven + * v2.1 Vincent Rijmen, K.U.Leuven + * + * This code is placed in the public domain. + */ +#include "mvOs.h" + +#include "mvAes.h" +#include "mvAesAlg.h" + + +/* Defines: + Add any additional defines you need +*/ + +#define MODE_ECB 1 /* Are we ciphering in ECB mode? */ +#define MODE_CBC 2 /* Are we ciphering in CBC mode? */ +#define MODE_CFB1 3 /* Are we ciphering in 1-bit CFB mode? */ + + +int aesMakeKey(MV_U8 *expandedKey, MV_U8 *keyMaterial, int keyLen, int blockLen) +{ + MV_U8 W[MAXROUNDS+1][4][MAXBC]; + MV_U8 k[4][MAXKC]; + MV_U8 j; + int i, rounds, KC; + + if (expandedKey == NULL) + { + return AES_BAD_KEY_INSTANCE; + } + + if (!((keyLen == 128) || (keyLen == 192) || (keyLen == 256))) + { + return AES_BAD_KEY_MAT; + } + + if (keyMaterial == NULL) + { + return AES_BAD_KEY_MAT; + } + + /* initialize key schedule: */ + for(i=0; i= 3) +MV_U32 cesaChainLength = 0; +int chainReqNum = 0; +MV_U32 chainIndex = 0; +MV_CESA_REQ* pNextActiveChain = 0; +MV_CESA_REQ* pEndCurrChain = 0; +MV_BOOL isFirstReq = MV_TRUE; +#endif + +static INLINE MV_U8* mvCesaSramAddrGet(void) +{ +#ifdef MV_CESA_NO_SRAM + return (MV_U8*)cesaSramVirtPtr; +#else + return (MV_U8*)cesaCryptEngBase; +#endif /* MV_CESA_NO_SRAM */ +} + +static INLINE MV_ULONG mvCesaSramVirtToPhys(void* pDev, MV_U8* pSramVirt) +{ +#ifdef MV_CESA_NO_SRAM + return (MV_ULONG)mvOsIoVirtToPhy(NULL, pSramVirt); +#else + return (MV_ULONG)pSramVirt; +#endif /* MV_CESA_NO_SRAM */ +} + +/* Internal Function prototypes */ + +static INLINE void mvCesaSramDescrBuild(MV_U32 config, int frag, + int cryptoOffset, int ivOffset, int cryptoLength, + int macOffset, int digestOffset, int macLength, int macTotalLen, + MV_CESA_REQ *pCesaReq, MV_DMA_DESC* pDmaDesc); + +static INLINE void mvCesaSramSaUpdate(short sid, MV_DMA_DESC *pDmaDesc); + +static INLINE int mvCesaDmaCopyPrepare(MV_CESA_MBUF* pMbuf, MV_U8* pSramBuf, + MV_DMA_DESC* pDmaDesc, MV_BOOL isToMbuf, + int offset, int copySize, MV_BOOL skipFlush); + +static void mvCesaHmacIvGet(MV_CESA_MAC_MODE macMode, unsigned char key[], int keyLength, + unsigned char innerIV[], unsigned char outerIV[]); + +static MV_STATUS mvCesaFragAuthComplete(MV_CESA_REQ* pReq, MV_CESA_SA* pSA, + int macDataSize); + +static MV_CESA_COMMAND* mvCesaCtrModeInit(void); + +static MV_STATUS mvCesaCtrModePrepare(MV_CESA_COMMAND *pCtrModeCmd, MV_CESA_COMMAND *pCmd); +static MV_STATUS mvCesaCtrModeComplete(MV_CESA_COMMAND *pOrgCmd, MV_CESA_COMMAND *pCmd); +static void mvCesaCtrModeFinish(MV_CESA_COMMAND *pCmd); + +static INLINE MV_STATUS mvCesaReqProcess(MV_CESA_REQ* pReq); +static MV_STATUS mvCesaFragReqProcess(MV_CESA_REQ* pReq, MV_U8 frag); + +static INLINE MV_STATUS mvCesaParamCheck(MV_CESA_SA* pSA, MV_CESA_COMMAND *pCmd, MV_U8* pFixOffset); +static INLINE MV_STATUS mvCesaFragParamCheck(MV_CESA_SA* pSA, MV_CESA_COMMAND *pCmd); + +static INLINE void mvCesaFragSizeFind(MV_CESA_SA* pSA, MV_CESA_REQ* pReq, + int cryptoOffset, int macOffset, + int* pCopySize, int* pCryptoDataSize, int* pMacDataSize); +static MV_STATUS mvCesaMbufCacheUnmap(MV_CESA_MBUF* pMbuf, int offset, int size); + + +/* Go to the next request in the request queue */ +static INLINE MV_CESA_REQ* MV_CESA_REQ_NEXT_PTR(MV_CESA_REQ* pReq) +{ + if(pReq == pCesaReqLast) + return pCesaReqFirst; + + return pReq+1; +} + +#if (MV_CESA_VERSION >= 3) +/* Go to the previous request in the request queue */ +static INLINE MV_CESA_REQ* MV_CESA_REQ_PREV_PTR(MV_CESA_REQ* pReq) +{ + if(pReq == pCesaReqFirst) + return pCesaReqLast; + + return pReq-1; +} + +#endif + + +static INLINE void mvCesaReqProcessStart(MV_CESA_REQ* pReq) +{ + int frag; + +#if (MV_CESA_VERSION >= 3) + pReq->state = MV_CESA_CHAIN; +#else + pReq->state = MV_CESA_PROCESS; +#endif + cesaStats.startCount++; + + if(pReq->fragMode == MV_CESA_FRAG_NONE) + { + frag = 0; + } + else + { + frag = pReq->frags.nextFrag; + pReq->frags.nextFrag++; + } +#if (MV_CESA_VERSION >= 2) + /* Enable TDMA engine */ + MV_REG_WRITE(MV_CESA_TDMA_CURR_DESC_PTR_REG, 0); + MV_REG_WRITE(MV_CESA_TDMA_NEXT_DESC_PTR_REG, + (MV_U32)mvCesaVirtToPhys(&pReq->dmaDescBuf, pReq->dma[frag].pDmaFirst)); +#else + /* Enable IDMA engine */ + MV_REG_WRITE(IDMA_CURR_DESC_PTR_REG(0), 0); + MV_REG_WRITE(IDMA_NEXT_DESC_PTR_REG(0), + (MV_U32)mvCesaVirtToPhys(&pReq->dmaDescBuf, pReq->dma[frag].pDmaFirst)); +#endif /* MV_CESA_VERSION >= 2 */ + +#if defined(MV_BRIDGE_SYNC_REORDER) + mvOsBridgeReorderWA(); +#endif + + /* Start Accelerator */ + MV_REG_WRITE(MV_CESA_CMD_REG, MV_CESA_CMD_CHAN_ENABLE_MASK); +} + + +/******************************************************************************* +* mvCesaHalInit - Initialize the CESA driver +* +* DESCRIPTION: +* This function initialize the CESA driver. +* 1) Session database +* 2) Request queue +* 4) DMA descriptor lists - one list per request. Each list +* has MV_CESA_MAX_DMA_DESC descriptors. +* +* INPUT: +* numOfSession - maximum number of supported sessions +* queueDepth - number of elements in the request queue. +* pSramBase - virtual address of Sram +* osHandle - A handle used by the OS to allocate memory for the +* module (Passed to the OS Services layer) +* +* RETURN: +* MV_OK - Success +* MV_NO_RESOURCE - Fail, can't allocate resources: +* Session database, request queue, +* DMA descriptors list, LRU cache database. +* MV_NOT_ALIGNED - Sram base address is not 8 byte aligned. +* +*******************************************************************************/ +MV_STATUS mvCesaHalInit (int numOfSession, int queueDepth, char* pSramBase, MV_U32 cryptEngBase, + void *osHandle) +{ + int i, req; + MV_U32 descOffsetReg, configReg; + MV_CESA_SRAM_SA *pSramSA; + + + mvOsPrintf("mvCesaInit: sessions=%d, queue=%d, pSram=%p\n", + numOfSession, queueDepth, pSramBase); + + cesaOsHandle = osHandle; + /* Create Session database */ + pCesaSAD = mvOsMalloc(sizeof(MV_CESA_SA)*numOfSession); + if(pCesaSAD == NULL) + { + mvOsPrintf("mvCesaInit: Can't allocate %u bytes for %d SAs\n", + sizeof(MV_CESA_SA)*numOfSession, numOfSession); + mvCesaFinish(); + return MV_NO_RESOURCE; + } + memset(pCesaSAD, 0, sizeof(MV_CESA_SA)*numOfSession); + cesaMaxSA = numOfSession; + + /* Allocate imag of sramSA in the DRAM */ + cesaSramSaBuf.bufSize = sizeof(MV_CESA_SRAM_SA)*numOfSession + + CPU_D_CACHE_LINE_SIZE; + + cesaSramSaBuf.bufVirtPtr = mvOsIoCachedMalloc(osHandle,cesaSramSaBuf.bufSize, + &cesaSramSaBuf.bufPhysAddr, + &cesaSramSaBuf.memHandle); + + if(cesaSramSaBuf.bufVirtPtr == NULL) + { + mvOsPrintf("mvCesaInit: Can't allocate %d bytes for sramSA structures\n", + cesaSramSaBuf.bufSize); + mvCesaFinish(); + return MV_NO_RESOURCE; + } + memset(cesaSramSaBuf.bufVirtPtr, 0, cesaSramSaBuf.bufSize); + pSramSA = (MV_CESA_SRAM_SA*)MV_ALIGN_UP((MV_ULONG)cesaSramSaBuf.bufVirtPtr, + CPU_D_CACHE_LINE_SIZE); + for(i=0; i= 3) + cesaChainLength = MAX_CESA_CHAIN_LENGTH; +#endif + /* pSramBase must be 8 byte aligned */ + if( MV_IS_NOT_ALIGN((MV_ULONG)pSramBase, 8) ) + { + mvOsPrintf("mvCesaInit: pSramBase (%p) must be 8 byte aligned\n", + pSramBase); + mvCesaFinish(); + return MV_NOT_ALIGNED; + } + cesaSramVirtPtr = (MV_CESA_SRAM_MAP*)pSramBase; + + cesaCryptEngBase = cryptEngBase; + + /*memset(cesaSramVirtPtr, 0, sizeof(MV_CESA_SRAM_MAP));*/ + + /* Clear registers */ + MV_REG_WRITE( MV_CESA_CFG_REG, 0); + MV_REG_WRITE( MV_CESA_ISR_CAUSE_REG, 0); + MV_REG_WRITE( MV_CESA_ISR_MASK_REG, 0); + + /* Initialize DMA descriptor lists for all requests in Request queue */ + descOffsetReg = configReg = 0; + for(req=0; reqcesaDescBuf.bufSize = sizeof(MV_CESA_DESC)*MV_CESA_MAX_REQ_FRAGS + + CPU_D_CACHE_LINE_SIZE; + + pReq->cesaDescBuf.bufVirtPtr = + mvOsIoCachedMalloc(osHandle,pReq->cesaDescBuf.bufSize, + &pReq->cesaDescBuf.bufPhysAddr, + &pReq->cesaDescBuf.memHandle); + + if(pReq->cesaDescBuf.bufVirtPtr == NULL) + { + mvOsPrintf("mvCesaInit: req=%d, Can't allocate %d bytes for CESA descriptors\n", + req, pReq->cesaDescBuf.bufSize); + mvCesaFinish(); + return MV_NO_RESOURCE; + } + memset(pReq->cesaDescBuf.bufVirtPtr, 0, pReq->cesaDescBuf.bufSize); + pReq->pCesaDesc = (MV_CESA_DESC*)MV_ALIGN_UP((MV_ULONG)pReq->cesaDescBuf.bufVirtPtr, + CPU_D_CACHE_LINE_SIZE); + + pReq->dmaDescBuf.bufSize = sizeof(MV_DMA_DESC)*MV_CESA_MAX_DMA_DESC*MV_CESA_MAX_REQ_FRAGS + + CPU_D_CACHE_LINE_SIZE; + + pReq->dmaDescBuf.bufVirtPtr = + mvOsIoCachedMalloc(osHandle,pReq->dmaDescBuf.bufSize, + &pReq->dmaDescBuf.bufPhysAddr, + &pReq->dmaDescBuf.memHandle); + + if(pReq->dmaDescBuf.bufVirtPtr == NULL) + { + mvOsPrintf("mvCesaInit: req=%d, Can't allocate %d bytes for DMA descriptor list\n", + req, pReq->dmaDescBuf.bufSize); + mvCesaFinish(); + return MV_NO_RESOURCE; + } + memset(pReq->dmaDescBuf.bufVirtPtr, 0, pReq->dmaDescBuf.bufSize); + pDmaDesc = (MV_DMA_DESC*)MV_ALIGN_UP((MV_ULONG)pReq->dmaDescBuf.bufVirtPtr, + CPU_D_CACHE_LINE_SIZE); + + for(frag=0; fragdma[frag]; + + pDma->pDmaFirst = pDmaDesc; + pDma->pDmaLast = NULL; + + for(i=0; ipDmaFirst[i].phyNextDescPtr = + MV_32BIT_LE(mvCesaVirtToPhys(&pReq->dmaDescBuf, &pDmaDesc[i+1])); + } + pDma->pDmaFirst[i].phyNextDescPtr = 0; + mvOsCacheFlush(NULL, &pDma->pDmaFirst[0], MV_CESA_MAX_DMA_DESC*sizeof(MV_DMA_DESC)); + + pDmaDesc += MV_CESA_MAX_DMA_DESC; + } + } + /*mvCesaCryptoIvSet(NULL, MV_CESA_MAX_IV_LENGTH);*/ + descOffsetReg = (MV_U16)((MV_U8*)&cesaSramVirtPtr->desc - mvCesaSramAddrGet()); + MV_REG_WRITE(MV_CESA_CHAN_DESC_OFFSET_REG, descOffsetReg); + + configReg |= (MV_CESA_CFG_WAIT_DMA_MASK | MV_CESA_CFG_ACT_DMA_MASK); +#if (MV_CESA_VERSION >= 3) + configReg |= MV_CESA_CFG_CHAIN_MODE_MASK; +#endif + +#if (MV_CESA_VERSION >= 2) + /* Initialize TDMA engine */ + MV_REG_WRITE(MV_CESA_TDMA_CTRL_REG, MV_CESA_TDMA_CTRL_VALUE); + MV_REG_WRITE(MV_CESA_TDMA_BYTE_COUNT_REG, 0); + MV_REG_WRITE(MV_CESA_TDMA_CURR_DESC_PTR_REG, 0); +#else + /* Initialize IDMA #0 engine */ + MV_REG_WRITE(IDMA_CTRL_LOW_REG(0), 0); + MV_REG_WRITE(IDMA_BYTE_COUNT_REG(0), 0); + MV_REG_WRITE(IDMA_CURR_DESC_PTR_REG(0), 0); + MV_REG_WRITE(IDMA_CTRL_HIGH_REG(0), ICCHR_ENDIAN_LITTLE +#ifdef MV_CPU_LE + | ICCHR_DESC_BYTE_SWAP_EN +#endif + ); + /* Clear Cause Byte of IDMA channel to be used */ + MV_REG_WRITE( IDMA_CAUSE_REG, ~ICICR_CAUSE_MASK_ALL(0)); + MV_REG_WRITE(IDMA_CTRL_LOW_REG(0), MV_CESA_IDMA_CTRL_LOW_VALUE); +#endif /* (MV_CESA_VERSION >= 2) */ + + /* Set CESA configuration registers */ + MV_REG_WRITE( MV_CESA_CFG_REG, configReg); + mvCesaDebugStatsClear(); + + return MV_OK; +} + +/******************************************************************************* +* mvCesaFinish - Shutdown the CESA driver +* +* DESCRIPTION: +* This function shutdown the CESA driver and free all allocted resources. +* +* INPUT: None +* +* RETURN: +* MV_OK - Success +* Other - Fail +* +*******************************************************************************/ +MV_STATUS mvCesaFinish (void) +{ + int req; + MV_CESA_REQ* pReq; + + mvOsPrintf("mvCesaFinish: \n"); + + cesaSramVirtPtr = NULL; + + /* Free all resources: DMA list, etc. */ + for(req=0; reqdmaDescBuf.bufVirtPtr != NULL) + { + mvOsIoCachedFree(cesaOsHandle,pReq->dmaDescBuf.bufSize, + pReq->dmaDescBuf.bufPhysAddr, + pReq->dmaDescBuf.bufVirtPtr, + pReq->dmaDescBuf.memHandle); + } + if(pReq->cesaDescBuf.bufVirtPtr != NULL) + { + mvOsIoCachedFree(cesaOsHandle,pReq->cesaDescBuf.bufSize, + pReq->cesaDescBuf.bufPhysAddr, + pReq->cesaDescBuf.bufVirtPtr, + pReq->cesaDescBuf.memHandle); + } + } +#if (MV_CESA_VERSION < 2) + MV_REG_WRITE(IDMA_CTRL_LOW_REG(0), 0); +#endif /* (MV_CESA_VERSION < 2) */ + + /* Free request queue */ + if(pCesaReqFirst != NULL) + { + mvOsFree(pCesaReqFirst); + pCesaReqFirst = pCesaReqLast = NULL; + pCesaReqEmpty = pCesaReqProcess = NULL; + cesaQueueDepth = cesaReqResources = 0; + } + /* Free SA database */ + if(pCesaSAD != NULL) + { + mvOsFree(pCesaSAD); + pCesaSAD = NULL; + cesaMaxSA = 0; + } + MV_REG_WRITE( MV_CESA_CFG_REG, 0); + MV_REG_WRITE( MV_CESA_ISR_CAUSE_REG, 0); + MV_REG_WRITE( MV_CESA_ISR_MASK_REG, 0); + + return MV_OK; +} + +/******************************************************************************* +* mvCesaCryptoIvSet - Set IV value for Crypto algorithm working in CBC mode +* +* DESCRIPTION: +* This function set IV value using by Crypto algorithms in CBC mode. +* Each channel has its own IV value. +* This function gets IV value from the caller. If no IV value passed from +* the caller or only part of IV passed, the function will init the rest part +* of IV value (or the whole IV) by random value. +* +* INPUT: +* MV_U8* pIV - Pointer to IV value supplied by user. If pIV==NULL +* the function will generate random IV value. +* int ivSize - size (in bytes) of IV provided by user. If ivSize is +* smaller than maximum IV size, the function will complete +* IV by random value. +* +* RETURN: +* MV_OK - Success +* Other - Fail +* +*******************************************************************************/ +MV_STATUS mvCesaCryptoIvSet(MV_U8* pIV, int ivSize) +{ + MV_U8* pSramIV; +#if defined(MV646xx) + mvOsPrintf("mvCesaCryptoIvSet: ERR. shouldn't use this call on MV64660\n"); +#endif + pSramIV = cesaSramVirtPtr->cryptoIV; + if(ivSize > MV_CESA_MAX_IV_LENGTH) + { + mvOsPrintf("mvCesaCryptoIvSet: ivSize (%d) is too large\n", ivSize); + ivSize = MV_CESA_MAX_IV_LENGTH; + } + if(pIV != NULL) + { + memcpy(pSramIV, pIV, ivSize); + ivSize = MV_CESA_MAX_IV_LENGTH - ivSize; + pSramIV += ivSize; + } + + while(ivSize > 0) + { + int size, mv_random = mvOsRand(); + + size = MV_MIN(ivSize, sizeof(mv_random)); + memcpy(pSramIV, (void*)&mv_random, size); + + pSramIV += size; + ivSize -= size; + } +/* + mvOsCacheFlush(NULL, cesaSramVirtPtr->cryptoIV, + MV_CESA_MAX_IV_LENGTH); + mvOsCacheInvalidate(NULL, cesaSramVirtPtr->cryptoIV, + MV_CESA_MAX_IV_LENGTH); +*/ + return MV_OK; +} + +/******************************************************************************* +* mvCesaSessionOpen - Open new uni-directional crypto session +* +* DESCRIPTION: +* This function open new session. +* +* INPUT: +* MV_CESA_OPEN_SESSION *pSession - pointer to new session input parameters +* +* OUTPUT: +* short *pSid - session ID, should be used for all future +* requests over this session. +* +* RETURN: +* MV_OK - Session opend successfully. +* MV_FULL - All sessions are in use, no free place in +* SA database. +* MV_BAD_PARAM - One of session input parameters is invalid. +* +*******************************************************************************/ +MV_STATUS mvCesaSessionOpen(MV_CESA_OPEN_SESSION *pSession, short* pSid) +{ + short sid; + MV_U32 config = 0; + int digestSize; + + cesaStats.openedCount++; + + /* Find free entry in SAD */ + for(sid=0; sidoperation >= MV_CESA_MAX_OPERATION) + { + mvOsPrintf("mvCesaSessionOpen: Unexpected operation %d\n", + pSession->operation); + return MV_BAD_PARAM; + } + config |= (pSession->operation << MV_CESA_OPERATION_OFFSET); + + if( (pSession->direction != MV_CESA_DIR_ENCODE) && + (pSession->direction != MV_CESA_DIR_DECODE) ) + { + mvOsPrintf("mvCesaSessionOpen: Unexpected direction %d\n", + pSession->direction); + return MV_BAD_PARAM; + } + config |= (pSession->direction << MV_CESA_DIRECTION_BIT); + /* Clear SA entry */ + /* memset(&pCesaSAD[sid], 0, sizeof(pCesaSAD[sid])); */ + + /* Check AUTH parameters and update SA entry */ + if(pSession->operation != MV_CESA_CRYPTO_ONLY) + { + /* For HMAC (MD5 and SHA1) - Maximum Key size is 64 bytes */ + if( (pSession->macMode == MV_CESA_MAC_HMAC_MD5) || + (pSession->macMode == MV_CESA_MAC_HMAC_SHA1) ) + { + if(pSession->macKeyLength > MV_CESA_MAX_MAC_KEY_LENGTH) + { + mvOsPrintf("mvCesaSessionOpen: macKeyLength %d is too large\n", + pSession->macKeyLength); + return MV_BAD_PARAM; + } + mvCesaHmacIvGet(pSession->macMode, pSession->macKey, pSession->macKeyLength, + pCesaSAD[sid].pSramSA->macInnerIV, + pCesaSAD[sid].pSramSA->macOuterIV); + pCesaSAD[sid].macKeyLength = pSession->macKeyLength; + } + switch(pSession->macMode) + { + case MV_CESA_MAC_MD5: + case MV_CESA_MAC_HMAC_MD5: + digestSize = MV_CESA_MD5_DIGEST_SIZE; + break; + + case MV_CESA_MAC_SHA1: + case MV_CESA_MAC_HMAC_SHA1: + digestSize = MV_CESA_SHA1_DIGEST_SIZE; + break; + + default: + mvOsPrintf("mvCesaSessionOpen: Unexpected macMode %d\n", + pSession->macMode); + return MV_BAD_PARAM; + } + config |= (pSession->macMode << MV_CESA_MAC_MODE_OFFSET); + + /* Supported digest sizes: MD5 - 16 bytes (128 bits), */ + /* SHA1 - 20 bytes (160 bits) or 12 bytes (96 bits) for both */ + if( (pSession->digestSize != digestSize) && (pSession->digestSize != 12)) + { + mvOsPrintf("mvCesaSessionOpen: Unexpected digest size %d\n", + pSession->digestSize); + mvOsPrintf("\t Valid values [bytes]: MD5-16, SHA1-20, Both-12\n"); + return MV_BAD_PARAM; + } + pCesaSAD[sid].digestSize = pSession->digestSize; + + if(pCesaSAD[sid].digestSize == 12) + { + /* Set MV_CESA_MAC_DIGEST_SIZE_BIT if digest size is 96 bits */ + config |= (MV_CESA_MAC_DIGEST_96B << MV_CESA_MAC_DIGEST_SIZE_BIT); + } + } + + /* Check CRYPTO parameters and update SA entry */ + if(pSession->operation != MV_CESA_MAC_ONLY) + { + switch(pSession->cryptoAlgorithm) + { + case MV_CESA_CRYPTO_DES: + pCesaSAD[sid].cryptoKeyLength = MV_CESA_DES_KEY_LENGTH; + pCesaSAD[sid].cryptoBlockSize = MV_CESA_DES_BLOCK_SIZE; + break; + + case MV_CESA_CRYPTO_3DES: + pCesaSAD[sid].cryptoKeyLength = MV_CESA_3DES_KEY_LENGTH; + pCesaSAD[sid].cryptoBlockSize = MV_CESA_DES_BLOCK_SIZE; + /* Only EDE mode is supported */ + config |= (MV_CESA_CRYPTO_3DES_EDE << + MV_CESA_CRYPTO_3DES_MODE_BIT); + break; + + case MV_CESA_CRYPTO_AES: + switch(pSession->cryptoKeyLength) + { + case 16: + pCesaSAD[sid].cryptoKeyLength = MV_CESA_AES_128_KEY_LENGTH; + config |= (MV_CESA_CRYPTO_AES_KEY_128 << + MV_CESA_CRYPTO_AES_KEY_LEN_OFFSET); + break; + + case 24: + pCesaSAD[sid].cryptoKeyLength = MV_CESA_AES_192_KEY_LENGTH; + config |= (MV_CESA_CRYPTO_AES_KEY_192 << + MV_CESA_CRYPTO_AES_KEY_LEN_OFFSET); + break; + + case 32: + default: + pCesaSAD[sid].cryptoKeyLength = MV_CESA_AES_256_KEY_LENGTH; + config |= (MV_CESA_CRYPTO_AES_KEY_256 << + MV_CESA_CRYPTO_AES_KEY_LEN_OFFSET); + break; + } + pCesaSAD[sid].cryptoBlockSize = MV_CESA_AES_BLOCK_SIZE; + break; + + default: + mvOsPrintf("mvCesaSessionOpen: Unexpected cryptoAlgorithm %d\n", + pSession->cryptoAlgorithm); + return MV_BAD_PARAM; + } + config |= (pSession->cryptoAlgorithm << MV_CESA_CRYPTO_ALG_OFFSET); + + if(pSession->cryptoKeyLength != pCesaSAD[sid].cryptoKeyLength) + { + mvOsPrintf("cesaSessionOpen: Wrong CryptoKeySize %d != %d\n", + pSession->cryptoKeyLength, pCesaSAD[sid].cryptoKeyLength); + return MV_BAD_PARAM; + } + + /* Copy Crypto key */ + if( (pSession->cryptoAlgorithm == MV_CESA_CRYPTO_AES) && + (pSession->direction == MV_CESA_DIR_DECODE)) + { + /* Crypto Key for AES decode is computed from original key material */ + /* and depend on cryptoKeyLength (128/192/256 bits) */ + aesMakeKey(pCesaSAD[sid].pSramSA->cryptoKey, pSession->cryptoKey, + pSession->cryptoKeyLength*8, MV_CESA_AES_BLOCK_SIZE*8); + } + else + { + /*panic("mvCesaSessionOpen2");*/ + memcpy(pCesaSAD[sid].pSramSA->cryptoKey, pSession->cryptoKey, + pCesaSAD[sid].cryptoKeyLength); + + } + + switch(pSession->cryptoMode) + { + case MV_CESA_CRYPTO_ECB: + pCesaSAD[sid].cryptoIvSize = 0; + break; + + case MV_CESA_CRYPTO_CBC: + pCesaSAD[sid].cryptoIvSize = pCesaSAD[sid].cryptoBlockSize; + break; + + case MV_CESA_CRYPTO_CTR: + /* Supported only for AES algorithm */ + if(pSession->cryptoAlgorithm != MV_CESA_CRYPTO_AES) + { + mvOsPrintf("mvCesaSessionOpen: CRYPTO CTR mode supported for AES only\n"); + return MV_BAD_PARAM; + } + pCesaSAD[sid].cryptoIvSize = 0; + pCesaSAD[sid].ctrMode = 1; + /* Replace to ECB mode for HW */ + pSession->cryptoMode = MV_CESA_CRYPTO_ECB; + break; + + default: + mvOsPrintf("mvCesaSessionOpen: Unexpected cryptoMode %d\n", + pSession->cryptoMode); + return MV_BAD_PARAM; + } + + config |= (pSession->cryptoMode << MV_CESA_CRYPTO_MODE_BIT); + } + pCesaSAD[sid].config = config; + + mvOsCacheFlush(NULL, pCesaSAD[sid].pSramSA, sizeof(MV_CESA_SRAM_SA)); + if(pSid != NULL) + *pSid = sid; + + pCesaSAD[sid].valid = 1; + return MV_OK; +} + +/******************************************************************************* +* mvCesaSessionClose - Close active crypto session +* +* DESCRIPTION: +* This function closes existing session +* +* INPUT: +* short sid - Unique identifier of the session to be closed +* +* RETURN: +* MV_OK - Session closed successfully. +* MV_BAD_PARAM - Session identifier is out of valid range. +* MV_NOT_FOUND - There is no active session with such ID. +* +*******************************************************************************/ +MV_STATUS mvCesaSessionClose(short sid) +{ + cesaStats.closedCount++; + + if(sid >= cesaMaxSA) + { + mvOsPrintf("CESA Error: sid (%d) is too big\n", sid); + return MV_BAD_PARAM; + } + if(pCesaSAD[sid].valid == 0) + { + mvOsPrintf("CESA Warning: Session (sid=%d) is invalid\n", sid); + return MV_NOT_FOUND; + } + if(cesaLastSid == sid) + cesaLastSid = -1; + + pCesaSAD[sid].valid = 0; + return MV_OK; +} + +/******************************************************************************* +* mvCesaAction - Perform crypto operation +* +* DESCRIPTION: +* This function set new CESA request FIFO queue for further HW processing. +* The function checks request parameters before set new request to the queue. +* If one of the CESA channels is ready for processing the request will be +* passed to HW. When request processing is finished the CESA interrupt will +* be generated by HW. The caller should call mvCesaReadyGet() function to +* complete request processing and get result. +* +* INPUT: +* MV_CESA_COMMAND *pCmd - pointer to new CESA request. +* It includes pointers to Source and Destination +* buffers, session identifier get from +* mvCesaSessionOpen() function, pointer to caller +* private data and all needed crypto parameters. +* +* RETURN: +* MV_OK - request successfully added to request queue +* and will be processed. +* MV_NO_MORE - request successfully added to request queue and will +* be processed, but request queue became Full and next +* request will not be accepted. +* MV_NO_RESOURCE - request queue is FULL and the request can not +* be processed. +* MV_OUT_OF_CPU_MEM - memory allocation needed for request processing is +* failed. Request can not be processed. +* MV_NOT_ALLOWED - This mixed request (CRYPTO+MAC) can not be processed +* as one request and should be splitted for two requests: +* CRYPTO_ONLY and MAC_ONLY. +* MV_BAD_PARAM - One of the request parameters is out of valid range. +* The request can not be processed. +* +*******************************************************************************/ +MV_STATUS mvCesaAction (MV_CESA_COMMAND *pCmd) +{ + MV_STATUS status; + MV_CESA_REQ* pReq = pCesaReqEmpty; + int sid = pCmd->sessionId; + MV_CESA_SA* pSA = &pCesaSAD[sid]; +#if (MV_CESA_VERSION >= 3) + MV_CESA_REQ* pFromReq; + MV_CESA_REQ* pToReq; +#endif + cesaStats.reqCount++; + + /* Check that the request queue is not FULL */ + if(cesaReqResources == 0) + return MV_NO_RESOURCE; + + if( (sid >= cesaMaxSA) || (!pSA->valid) ) + { + mvOsPrintf("CESA Action Error: Session sid=%d is INVALID\n", sid); + return MV_BAD_PARAM; + } + pSA->count++; + + if(pSA->ctrMode) + { + /* AES in CTR mode can't be mixed with Authentication */ + if( (pSA->config & MV_CESA_OPERATION_MASK) != + (MV_CESA_CRYPTO_ONLY << MV_CESA_OPERATION_OFFSET) ) + { + mvOsPrintf("mvCesaAction : CRYPTO CTR mode can't be mixed with AUTH\n"); + return MV_NOT_ALLOWED; + } + /* All other request parameters should not be checked because key stream */ + /* (not user data) processed by AES HW engine */ + pReq->pOrgCmd = pCmd; + /* Allocate temporary pCmd structure for Key stream */ + pCmd = mvCesaCtrModeInit(); + if(pCmd == NULL) + return MV_OUT_OF_CPU_MEM; + + /* Prepare Key stream */ + mvCesaCtrModePrepare(pCmd, pReq->pOrgCmd); + pReq->fixOffset = 0; + } + else + { + /* Check request parameters and calculae fixOffset */ + status = mvCesaParamCheck(pSA, pCmd, &pReq->fixOffset); + if(status != MV_OK) + { + return status; + } + } + pReq->pCmd = pCmd; + + /* Check if the packet need fragmentation */ + if(pCmd->pSrc->mbufSize <= sizeof(cesaSramVirtPtr->buf) ) + { + /* request size is smaller than single buffer size */ + pReq->fragMode = MV_CESA_FRAG_NONE; + + /* Prepare NOT fragmented packets */ + status = mvCesaReqProcess(pReq); + if(status != MV_OK) + { + mvOsPrintf("CesaReady: ReqProcess error: pReq=%p, status=0x%x\n", + pReq, status); + } +#if (MV_CESA_VERSION >= 3) + pReq->frags.numFrag = 1; +#endif + } + else + { + MV_U8 frag = 0; + + /* request size is larger than buffer size - needs fragmentation */ + + /* Check restrictions for processing fragmented packets */ + status = mvCesaFragParamCheck(pSA, pCmd); + if(status != MV_OK) + return status; + + pReq->fragMode = MV_CESA_FRAG_FIRST; + pReq->frags.nextFrag = 0; + + /* Prepare Process Fragmented packets */ + while(pReq->fragMode != MV_CESA_FRAG_LAST) + { + if(frag >= MV_CESA_MAX_REQ_FRAGS) + { + mvOsPrintf("mvCesaAction Error: Too large request frag=%d\n", frag); + return MV_OUT_OF_CPU_MEM; + } + status = mvCesaFragReqProcess(pReq, frag); + if(status == MV_OK) { +#if (MV_CESA_VERSION >= 3) + if(frag) { + pReq->dma[frag-1].pDmaLast->phyNextDescPtr = + MV_32BIT_LE(mvCesaVirtToPhys(&pReq->dmaDescBuf, pReq->dma[frag].pDmaFirst)); + mvOsCacheFlush(NULL, pReq->dma[frag-1].pDmaLast, sizeof(MV_DMA_DESC)); + } +#endif + frag++; + } + } + pReq->frags.numFrag = frag; +#if (MV_CESA_VERSION >= 3) + if(chainReqNum) { + chainReqNum += pReq->frags.numFrag; + if(chainReqNum >= MAX_CESA_CHAIN_LENGTH) + chainReqNum = MAX_CESA_CHAIN_LENGTH; + } +#endif + } + + pReq->state = MV_CESA_PENDING; + + pCesaReqEmpty = MV_CESA_REQ_NEXT_PTR(pReq); + cesaReqResources -= 1; + +/* #ifdef CESA_DEBUG */ + if( (cesaQueueDepth - cesaReqResources) > cesaStats.maxReqCount) + cesaStats.maxReqCount = (cesaQueueDepth - cesaReqResources); +/* #endif CESA_DEBUG */ + + cesaLastSid = sid; + +#if (MV_CESA_VERSION >= 3) + /* Are we within chain bounderies and follows the first request ? */ + if((chainReqNum > 0) && (chainReqNum < MAX_CESA_CHAIN_LENGTH)) { + if(chainIndex) { + pFromReq = MV_CESA_REQ_PREV_PTR(pReq); + pToReq = pReq; + pReq->state = MV_CESA_CHAIN; + /* assume concatenating is possible */ + pFromReq->dma[pFromReq->frags.numFrag-1].pDmaLast->phyNextDescPtr = + MV_32BIT_LE(mvCesaVirtToPhys(&pToReq->dmaDescBuf, pToReq->dma[0].pDmaFirst)); + mvOsCacheFlush(NULL, pFromReq->dma[pFromReq->frags.numFrag-1].pDmaLast, sizeof(MV_DMA_DESC)); + + /* align active & next pointers */ + if(pNextActiveChain->state != MV_CESA_PENDING) + pEndCurrChain = pNextActiveChain = MV_CESA_REQ_NEXT_PTR(pReq); + } + else { /* we have only one chain, start new one */ + chainReqNum = 0; + chainIndex++; + /* align active & next pointers */ + if(pNextActiveChain->state != MV_CESA_PENDING) + pEndCurrChain = pNextActiveChain = pReq; + } + } + else { + /* In case we concatenate full chain */ + if(chainReqNum == MAX_CESA_CHAIN_LENGTH) { + chainIndex++; + if(pNextActiveChain->state != MV_CESA_PENDING) + pEndCurrChain = pNextActiveChain = pReq; + chainReqNum = 0; + } + + pReq = pCesaReqProcess; + if(pReq->state == MV_CESA_PENDING) { + pNextActiveChain = pReq; + pEndCurrChain = MV_CESA_REQ_NEXT_PTR(pReq); + /* Start Process new request */ + mvCesaReqProcessStart(pReq); + } + } + + chainReqNum++; + + if((chainIndex < MAX_CESA_CHAIN_LENGTH) && (chainReqNum > cesaStats.maxChainUsage)) + cesaStats.maxChainUsage = chainReqNum; + +#else + + /* Check status of CESA channels and process requests if possible */ + pReq = pCesaReqProcess; + if(pReq->state == MV_CESA_PENDING) + { + /* Start Process new request */ + mvCesaReqProcessStart(pReq); + } +#endif + /* If request queue became FULL - return MV_NO_MORE */ + if(cesaReqResources == 0) + return MV_NO_MORE; + + return MV_OK; + +} + +/******************************************************************************* +* mvCesaReadyGet - Get crypto request that processing is finished +* +* DESCRIPTION: +* This function complete request processing and return ready request to +* caller. To don't miss interrupts the caller must call this function +* while MV_OK or MV_TERMINATE values returned. +* +* INPUT: +* MV_U32 chanMap - map of CESA channels finished thier job +* accordingly with CESA Cause register. +* MV_CESA_RESULT* pResult - pointer to structure contains information +* about ready request. It includes pointer to +* user private structure "pReqPrv", session identifier +* for this request "sessionId" and return code. +* Return code set to MV_FAIL if calculated digest value +* on decode direction is different than digest value +* in the packet. +* +* RETURN: +* MV_OK - Success, ready request is returned. +* MV_NOT_READY - Next request is not ready yet. New interrupt will +* be generated for futher request processing. +* MV_EMPTY - There is no more request for processing. +* MV_BUSY - Fragmented request is not ready yet. +* MV_TERMINATE - Call this function once more to complete processing +* of fragmented request. +* +*******************************************************************************/ +MV_STATUS mvCesaReadyGet(MV_CESA_RESULT* pResult) +{ + MV_STATUS status, readyStatus = MV_NOT_READY; + MV_U32 statusReg; + MV_CESA_REQ* pReq; + MV_CESA_SA* pSA; + +#if (MV_CESA_VERSION >= 3) + if(isFirstReq == MV_TRUE) { + if(chainIndex == 0) + chainReqNum = 0; + + isFirstReq = MV_FALSE; + + if(pNextActiveChain->state == MV_CESA_PENDING) { + /* Start request Process */ + mvCesaReqProcessStart(pNextActiveChain); + pEndCurrChain = pNextActiveChain; + if(chainIndex > 0) + chainIndex--; + /* Update pNextActiveChain to next chain head */ + while(pNextActiveChain->state == MV_CESA_CHAIN) + pNextActiveChain = MV_CESA_REQ_NEXT_PTR(pNextActiveChain); + } + } + + /* Check if there are more processed requests - can we remove pEndCurrChain ??? */ + if(pCesaReqProcess == pEndCurrChain) { + isFirstReq = MV_TRUE; + pEndCurrChain = pNextActiveChain; +#else + if(pCesaReqProcess->state != MV_CESA_PROCESS) { +#endif + return MV_EMPTY; + } + +#ifdef CESA_DEBUG + statusReg = MV_REG_READ(MV_CESA_STATUS_REG); + if( statusReg & MV_CESA_STATUS_ACTIVE_MASK ) + { + mvOsPrintf("mvCesaReadyGet: Not Ready, Status = 0x%x\n", statusReg); + cesaStats.notReadyCount++; + return MV_NOT_READY; + } +#endif /* CESA_DEBUG */ + + cesaStats.readyCount++; + + pReq = pCesaReqProcess; + pSA = &pCesaSAD[pReq->pCmd->sessionId]; + + pResult->retCode = MV_OK; + if(pReq->fragMode != MV_CESA_FRAG_NONE) + { + MV_U8* pNewDigest; + int frag; +#if (MV_CESA_VERSION >= 3) + pReq->frags.nextFrag = 1; + while(pReq->frags.nextFrag <= pReq->frags.numFrag) { +#endif + frag = (pReq->frags.nextFrag - 1); + + /* Restore DMA descriptor list */ + pReq->dma[frag].pDmaLast->phyNextDescPtr = + MV_32BIT_LE(mvCesaVirtToPhys(&pReq->dmaDescBuf, &pReq->dma[frag].pDmaLast[1])); + pReq->dma[frag].pDmaLast = NULL; + + /* Special processing for finished fragmented request */ + if(pReq->frags.nextFrag >= pReq->frags.numFrag) + { + mvCesaMbufCacheUnmap(pReq->pCmd->pDst, 0, pReq->pCmd->pDst->mbufSize); + + /* Fragmented packet is ready */ + if( (pSA->config & MV_CESA_OPERATION_MASK) != + (MV_CESA_CRYPTO_ONLY << MV_CESA_OPERATION_OFFSET) ) + { + int macDataSize = pReq->pCmd->macLength - pReq->frags.macSize; + + if(macDataSize != 0) + { + /* Calculate all other blocks by SW */ + mvCesaFragAuthComplete(pReq, pSA, macDataSize); + } + + /* Copy new digest from SRAM to the Destination buffer */ + pNewDigest = cesaSramVirtPtr->buf + pReq->frags.newDigestOffset; + status = mvCesaCopyToMbuf(pNewDigest, pReq->pCmd->pDst, + pReq->pCmd->digestOffset, pSA->digestSize); + + /* For decryption: Compare new digest value with original one */ + if((pSA->config & MV_CESA_DIRECTION_MASK) == + (MV_CESA_DIR_DECODE << MV_CESA_DIRECTION_BIT)) + { + if( memcmp(pNewDigest, pReq->frags.orgDigest, pSA->digestSize) != 0) + { +/* + mvOsPrintf("Digest error: chan=%d, newDigest=%p, orgDigest=%p, status = 0x%x\n", + chan, pNewDigest, pReq->frags.orgDigest, MV_REG_READ(MV_CESA_STATUS_REG)); +*/ + /* Signiture verification is failed */ + pResult->retCode = MV_FAIL; + } + } + } + readyStatus = MV_OK; + } +#if (MV_CESA_VERSION >= 3) + pReq->frags.nextFrag++; + } +#endif + } + else + { + mvCesaMbufCacheUnmap(pReq->pCmd->pDst, 0, pReq->pCmd->pDst->mbufSize); + + /* Restore DMA descriptor list */ + pReq->dma[0].pDmaLast->phyNextDescPtr = + MV_32BIT_LE(mvCesaVirtToPhys(&pReq->dmaDescBuf, &pReq->dma[0].pDmaLast[1])); + pReq->dma[0].pDmaLast = NULL; + if( ((pSA->config & MV_CESA_OPERATION_MASK) != + (MV_CESA_CRYPTO_ONLY << MV_CESA_OPERATION_OFFSET) ) && + ((pSA->config & MV_CESA_DIRECTION_MASK) == + (MV_CESA_DIR_DECODE << MV_CESA_DIRECTION_BIT)) ) + { + /* For AUTH on decode : Check Digest result in Status register */ + statusReg = MV_REG_READ(MV_CESA_STATUS_REG); + if(statusReg & MV_CESA_STATUS_DIGEST_ERR_MASK) + { +/* + mvOsPrintf("Digest error: chan=%d, status = 0x%x\n", + chan, statusReg); +*/ + /* Signiture verification is failed */ + pResult->retCode = MV_FAIL; + } + } + readyStatus = MV_OK; + } + + if(readyStatus == MV_OK) + { + /* If Request is ready - Prepare pResult structure */ + pResult->pReqPrv = pReq->pCmd->pReqPrv; + pResult->sessionId = pReq->pCmd->sessionId; + + pReq->state = MV_CESA_IDLE; + pCesaReqProcess = MV_CESA_REQ_NEXT_PTR(pReq); + cesaReqResources++; + + if(pSA->ctrMode) + { + /* For AES CTR mode - complete processing and free allocated resources */ + mvCesaCtrModeComplete(pReq->pOrgCmd, pReq->pCmd); + mvCesaCtrModeFinish(pReq->pCmd); + pReq->pOrgCmd = NULL; + } + } + +#if (MV_CESA_VERSION < 3) + if(pCesaReqProcess->state == MV_CESA_PROCESS) + { + /* Start request Process */ + mvCesaReqProcessStart(pCesaReqProcess); + if(readyStatus == MV_NOT_READY) + readyStatus = MV_BUSY; + } + else if(pCesaReqProcess != pCesaReqEmpty) + { + /* Start process new request from the queue */ + mvCesaReqProcessStart(pCesaReqProcess); + } +#endif + return readyStatus; +} + +/***************** Functions to work with CESA_MBUF structure ******************/ + +/******************************************************************************* +* mvCesaMbufOffset - Locate offset in the Mbuf structure +* +* DESCRIPTION: +* This function locates offset inside Multi-Bufeer structure. +* It get fragment number and place in the fragment where the offset +* is located. +* +* +* INPUT: +* MV_CESA_MBUF* pMbuf - Pointer to multi-buffer structure +* int offset - Offset from the beginning of the data presented by +* the Mbuf structure. +* +* OUTPUT: +* int* pBufOffset - Offset from the beginning of the fragment where +* the offset is located. +* +* RETURN: +* int - Number of fragment, where the offset is located\ +* +*******************************************************************************/ +int mvCesaMbufOffset(MV_CESA_MBUF* pMbuf, int offset, int* pBufOffset) +{ + int frag = 0; + + while(offset > 0) + { + if(frag >= pMbuf->numFrags) + { + mvOsPrintf("mvCesaMbufOffset: Error: frag (%d) > numFrags (%d)\n", + frag, pMbuf->numFrags); + return MV_INVALID; + } + if(offset < pMbuf->pFrags[frag].bufSize) + { + break; + } + offset -= pMbuf->pFrags[frag].bufSize; + frag++; + } + if(pBufOffset != NULL) + *pBufOffset = offset; + + return frag; +} + +/******************************************************************************* +* mvCesaCopyFromMbuf - Copy data from the Mbuf structure to continuous buffer +* +* DESCRIPTION: +* +* +* INPUT: +* MV_U8* pDstBuf - Pointer to continuous buffer, where data is +* copied to. +* MV_CESA_MBUF* pSrcMbuf - Pointer to multi-buffer structure where data is +* copied from. +* int offset - Offset in the Mbuf structure where located first +* byte of data should be copied. +* int size - Size of data should be copied +* +* RETURN: +* MV_OK - Success, all data is copied successfully. +* MV_OUT_OF_RANGE - Failed, offset is out of Multi-buffer data range. +* No data is copied. +* MV_EMPTY - Multi-buffer structure has not enough data to copy +* Data from the offset to end of Mbuf data is copied. +* +*******************************************************************************/ +MV_STATUS mvCesaCopyFromMbuf(MV_U8* pDstBuf, MV_CESA_MBUF* pSrcMbuf, + int offset, int size) +{ + int frag, fragOffset, bufSize; + MV_U8* pBuf; + + if(size == 0) + return MV_OK; + + frag = mvCesaMbufOffset(pSrcMbuf, offset, &fragOffset); + if(frag == MV_INVALID) + { + mvOsPrintf("CESA Mbuf Error: offset (%d) out of range\n", offset); + return MV_OUT_OF_RANGE; + } + + bufSize = pSrcMbuf->pFrags[frag].bufSize - fragOffset; + pBuf = pSrcMbuf->pFrags[frag].bufVirtPtr + fragOffset; + while(MV_TRUE) + { + if(size <= bufSize) + { + memcpy(pDstBuf, pBuf, size); + return MV_OK; + } + memcpy(pDstBuf, pBuf, bufSize); + size -= bufSize; + frag++; + pDstBuf += bufSize; + if(frag >= pSrcMbuf->numFrags) + break; + + bufSize = pSrcMbuf->pFrags[frag].bufSize; + pBuf = pSrcMbuf->pFrags[frag].bufVirtPtr; + } + mvOsPrintf("mvCesaCopyFromMbuf: Mbuf is EMPTY - %d bytes isn't copied\n", + size); + return MV_EMPTY; +} + +/******************************************************************************* +* mvCesaCopyToMbuf - Copy data from continuous buffer to the Mbuf structure +* +* DESCRIPTION: +* +* +* INPUT: +* MV_U8* pSrcBuf - Pointer to continuous buffer, where data is +* copied from. +* MV_CESA_MBUF* pDstMbuf - Pointer to multi-buffer structure where data is +* copied to. +* int offset - Offset in the Mbuf structure where located first +* byte of data should be copied. +* int size - Size of data should be copied +* +* RETURN: +* MV_OK - Success, all data is copied successfully. +* MV_OUT_OF_RANGE - Failed, offset is out of Multi-buffer data range. +* No data is copied. +* MV_FULL - Multi-buffer structure has not enough place to copy +* all data. Data from the offset to end of Mbuf data +* is copied. +* +*******************************************************************************/ +MV_STATUS mvCesaCopyToMbuf(MV_U8* pSrcBuf, MV_CESA_MBUF* pDstMbuf, + int offset, int size) +{ + int frag, fragOffset, bufSize; + MV_U8* pBuf; + + if(size == 0) + return MV_OK; + + frag = mvCesaMbufOffset(pDstMbuf, offset, &fragOffset); + if(frag == MV_INVALID) + { + mvOsPrintf("CESA Mbuf Error: offset (%d) out of range\n", offset); + return MV_OUT_OF_RANGE; + } + + bufSize = pDstMbuf->pFrags[frag].bufSize - fragOffset; + pBuf = pDstMbuf->pFrags[frag].bufVirtPtr + fragOffset; + while(MV_TRUE) + { + if(size <= bufSize) + { + memcpy(pBuf, pSrcBuf, size); + return MV_OK; + } + memcpy(pBuf, pSrcBuf, bufSize); + size -= bufSize; + frag++; + pSrcBuf += bufSize; + if(frag >= pDstMbuf->numFrags) + break; + + bufSize = pDstMbuf->pFrags[frag].bufSize; + pBuf = pDstMbuf->pFrags[frag].bufVirtPtr; + } + mvOsPrintf("mvCesaCopyToMbuf: Mbuf is FULL - %d bytes isn't copied\n", + size); + return MV_FULL; +} + +/******************************************************************************* +* mvCesaMbufCopy - Copy data from one Mbuf structure to the other Mbuf structure +* +* DESCRIPTION: +* +* +* INPUT: +* +* MV_CESA_MBUF* pDstMbuf - Pointer to multi-buffer structure where data is +* copied to. +* int dstMbufOffset - Offset in the dstMbuf structure where first byte +* of data should be copied to. +* MV_CESA_MBUF* pSrcMbuf - Pointer to multi-buffer structure where data is +* copied from. +* int srcMbufOffset - Offset in the srcMbuf structure where first byte +* of data should be copied from. +* int size - Size of data should be copied +* +* RETURN: +* MV_OK - Success, all data is copied successfully. +* MV_OUT_OF_RANGE - Failed, srcMbufOffset or dstMbufOffset is out of +* srcMbuf or dstMbuf structure correspondently. +* No data is copied. +* MV_BAD_SIZE - srcMbuf or dstMbuf structure is too small to copy +* all data. Partial data is copied +* +*******************************************************************************/ +MV_STATUS mvCesaMbufCopy(MV_CESA_MBUF* pMbufDst, int dstMbufOffset, + MV_CESA_MBUF* pMbufSrc, int srcMbufOffset, int size) +{ + int srcFrag, dstFrag, srcSize, dstSize, srcOffset, dstOffset; + int copySize; + MV_U8 *pSrc, *pDst; + + if(size == 0) + return MV_OK; + + srcFrag = mvCesaMbufOffset(pMbufSrc, srcMbufOffset, &srcOffset); + if(srcFrag == MV_INVALID) + { + mvOsPrintf("CESA srcMbuf Error: offset (%d) out of range\n", srcMbufOffset); + return MV_OUT_OF_RANGE; + } + pSrc = pMbufSrc->pFrags[srcFrag].bufVirtPtr + srcOffset; + srcSize = pMbufSrc->pFrags[srcFrag].bufSize - srcOffset; + + dstFrag = mvCesaMbufOffset(pMbufDst, dstMbufOffset, &dstOffset); + if(dstFrag == MV_INVALID) + { + mvOsPrintf("CESA dstMbuf Error: offset (%d) out of range\n", dstMbufOffset); + return MV_OUT_OF_RANGE; + } + pDst = pMbufDst->pFrags[dstFrag].bufVirtPtr + dstOffset; + dstSize = pMbufDst->pFrags[dstFrag].bufSize - dstOffset; + + while(size > 0) + { + copySize = MV_MIN(srcSize, dstSize); + if(size <= copySize) + { + memcpy(pDst, pSrc, size); + return MV_OK; + } + memcpy(pDst, pSrc, copySize); + size -= copySize; + srcSize -= copySize; + dstSize -= copySize; + + if(srcSize == 0) + { + srcFrag++; + if(srcFrag >= pMbufSrc->numFrags) + break; + + pSrc = pMbufSrc->pFrags[srcFrag].bufVirtPtr; + srcSize = pMbufSrc->pFrags[srcFrag].bufSize; + } + + if(dstSize == 0) + { + dstFrag++; + if(dstFrag >= pMbufDst->numFrags) + break; + + pDst = pMbufDst->pFrags[dstFrag].bufVirtPtr; + dstSize = pMbufDst->pFrags[dstFrag].bufSize; + } + } + mvOsPrintf("mvCesaMbufCopy: BAD size - %d bytes isn't copied\n", + size); + + return MV_BAD_SIZE; +} + +static MV_STATUS mvCesaMbufCacheUnmap(MV_CESA_MBUF* pMbuf, int offset, int size) +{ + int frag, fragOffset, bufSize; + MV_U8* pBuf; + + if(size == 0) + return MV_OK; + + frag = mvCesaMbufOffset(pMbuf, offset, &fragOffset); + if(frag == MV_INVALID) + { + mvOsPrintf("CESA Mbuf Error: offset (%d) out of range\n", offset); + return MV_OUT_OF_RANGE; + } + + bufSize = pMbuf->pFrags[frag].bufSize - fragOffset; + pBuf = pMbuf->pFrags[frag].bufVirtPtr + fragOffset; + while(MV_TRUE) + { + if(size <= bufSize) + { + mvOsCacheUnmap(NULL, mvOsIoVirtToPhy(NULL, pBuf), size); + return MV_OK; + } + + mvOsCacheUnmap(NULL, mvOsIoVirtToPhy(NULL, pBuf), bufSize); + size -= bufSize; + frag++; + if(frag >= pMbuf->numFrags) + break; + + bufSize = pMbuf->pFrags[frag].bufSize; + pBuf = pMbuf->pFrags[frag].bufVirtPtr; + } + mvOsPrintf("%s: Mbuf is FULL - %d bytes isn't Unmapped\n", + __FUNCTION__, size); + return MV_FULL; +} + + +/*************************************** Local Functions ******************************/ + +/******************************************************************************* +* mvCesaFragReqProcess - Process fragmented request +* +* DESCRIPTION: +* This function processes a fragment of fragmented request (First, Middle or Last) +* +* +* INPUT: +* MV_CESA_REQ* pReq - Pointer to the request in the request queue. +* +* RETURN: +* MV_OK - The fragment is successfully passed to HW for processing. +* MV_TERMINATE - Means, that HW finished its work on this packet and no more +* interrupts will be generated for this request. +* Function mvCesaReadyGet() must be called to complete request +* processing and get request result. +* +*******************************************************************************/ +static MV_STATUS mvCesaFragReqProcess(MV_CESA_REQ* pReq, MV_U8 frag) +{ + int i, copySize, cryptoDataSize, macDataSize, sid; + int cryptoIvOffset, digestOffset; + MV_U32 config; + MV_CESA_COMMAND* pCmd = pReq->pCmd; + MV_CESA_SA* pSA; + MV_CESA_MBUF* pMbuf; + MV_DMA_DESC* pDmaDesc = pReq->dma[frag].pDmaFirst; + MV_U8* pSramBuf = cesaSramVirtPtr->buf; + int macTotalLen = 0; + int fixOffset, cryptoOffset, macOffset; + + cesaStats.fragCount++; + + sid = pReq->pCmd->sessionId; + + pSA = &pCesaSAD[sid]; + + cryptoIvOffset = digestOffset = 0; + i = macDataSize = 0; + cryptoDataSize = 0; + + /* First fragment processing */ + if(pReq->fragMode == MV_CESA_FRAG_FIRST) + { + /* pReq->frags monitors processing of fragmented request between fragments */ + pReq->frags.bufOffset = 0; + pReq->frags.cryptoSize = 0; + pReq->frags.macSize = 0; + + config = pSA->config | (MV_CESA_FRAG_FIRST << MV_CESA_FRAG_MODE_OFFSET); + + /* fixOffset can be not equal to zero only for FIRST fragment */ + fixOffset = pReq->fixOffset; + /* For FIRST fragment crypto and mac offsets are taken from pCmd */ + cryptoOffset = pCmd->cryptoOffset; + macOffset = pCmd->macOffset; + + copySize = sizeof(cesaSramVirtPtr->buf) - pReq->fixOffset; + + /* Find fragment size: Must meet all requirements for CRYPTO and MAC + * cryptoDataSize - size of data will be encrypted/decrypted in this fragment + * macDataSize - size of data will be signed/verified in this fragment + * copySize - size of data will be copied from srcMbuf to SRAM and + * back to dstMbuf for this fragment + */ + mvCesaFragSizeFind(pSA, pReq, cryptoOffset, macOffset, + ©Size, &cryptoDataSize, &macDataSize); + + if( (pSA->config & MV_CESA_OPERATION_MASK) != + (MV_CESA_MAC_ONLY << MV_CESA_OPERATION_OFFSET)) + { + /* CryptoIV special processing */ + if( (pSA->config & MV_CESA_CRYPTO_MODE_MASK) == + (MV_CESA_CRYPTO_CBC << MV_CESA_CRYPTO_MODE_BIT) ) + { + /* In CBC mode for encode direction when IV from user */ + if( (pCmd->ivFromUser) && + ((pSA->config & MV_CESA_DIRECTION_MASK) == + (MV_CESA_DIR_ENCODE << MV_CESA_DIRECTION_BIT)) ) + { + + /* For Crypto Encode in CBC mode HW always takes IV from SRAM IVPointer, + * (not from IVBufPointer). So when ivFromUser==1, we should copy IV from user place + * in the buffer to SRAM IVPointer + */ + i += mvCesaDmaCopyPrepare(pCmd->pSrc, cesaSramVirtPtr->cryptoIV, &pDmaDesc[i], + MV_FALSE, pCmd->ivOffset, pSA->cryptoIvSize, pCmd->skipFlush); + } + + /* Special processing when IV is not located in the first fragment */ + if(pCmd->ivOffset > (copySize - pSA->cryptoIvSize)) + { + /* Prepare dummy place for cryptoIV in SRAM */ + cryptoIvOffset = cesaSramVirtPtr->tempCryptoIV - mvCesaSramAddrGet(); + + /* For Decryption: Copy IV value from pCmd->ivOffset to Special SRAM place */ + if((pSA->config & MV_CESA_DIRECTION_MASK) == + (MV_CESA_DIR_DECODE << MV_CESA_DIRECTION_BIT)) + { + i += mvCesaDmaCopyPrepare(pCmd->pSrc, cesaSramVirtPtr->tempCryptoIV, &pDmaDesc[i], + MV_FALSE, pCmd->ivOffset, pSA->cryptoIvSize, pCmd->skipFlush); + } + else + { + /* For Encryption when IV is NOT from User: */ + /* Copy IV from SRAM to buffer (pCmd->ivOffset) */ + if(pCmd->ivFromUser == 0) + { + /* copy IV value from cryptoIV to Buffer (pCmd->ivOffset) */ + i += mvCesaDmaCopyPrepare(pCmd->pSrc, cesaSramVirtPtr->cryptoIV, &pDmaDesc[i], + MV_TRUE, pCmd->ivOffset, pSA->cryptoIvSize, pCmd->skipFlush); + } + } + } + else + { + cryptoIvOffset = pCmd->ivOffset; + } + } + } + + if( (pSA->config & MV_CESA_OPERATION_MASK) != + (MV_CESA_CRYPTO_ONLY << MV_CESA_OPERATION_OFFSET) ) + { + /* MAC digest special processing on Decode direction */ + if((pSA->config & MV_CESA_DIRECTION_MASK) == + (MV_CESA_DIR_DECODE << MV_CESA_DIRECTION_BIT)) + { + /* Save digest from pCmd->digestOffset */ + mvCesaCopyFromMbuf(pReq->frags.orgDigest, + pCmd->pSrc, pCmd->digestOffset, pSA->digestSize); + + /* If pCmd->digestOffset is not located on the first */ + if(pCmd->digestOffset > (copySize - pSA->digestSize)) + { + MV_U8 digestZero[MV_CESA_MAX_DIGEST_SIZE]; + + /* Set zeros to pCmd->digestOffset (DRAM) */ + memset(digestZero, 0, MV_CESA_MAX_DIGEST_SIZE); + mvCesaCopyToMbuf(digestZero, pCmd->pSrc, pCmd->digestOffset, pSA->digestSize); + + /* Prepare dummy place for digest in SRAM */ + digestOffset = cesaSramVirtPtr->tempDigest - mvCesaSramAddrGet(); + } + else + { + digestOffset = pCmd->digestOffset; + } + } + } + /* Update SA in SRAM */ + if(cesaLastSid != sid) + { + mvCesaSramSaUpdate(sid, &pDmaDesc[i]); + i++; + } + + pReq->fragMode = MV_CESA_FRAG_MIDDLE; + } + else + { + /* Continue fragment */ + fixOffset = 0; + cryptoOffset = 0; + macOffset = 0; + if( (pCmd->pSrc->mbufSize - pReq->frags.bufOffset) <= sizeof(cesaSramVirtPtr->buf)) + { + /* Last fragment */ + config = pSA->config | (MV_CESA_FRAG_LAST << MV_CESA_FRAG_MODE_OFFSET); + pReq->fragMode = MV_CESA_FRAG_LAST; + copySize = pCmd->pSrc->mbufSize - pReq->frags.bufOffset; + + if( (pSA->config & MV_CESA_OPERATION_MASK) != + (MV_CESA_CRYPTO_ONLY << MV_CESA_OPERATION_OFFSET) ) + { + macDataSize = pCmd->macLength - pReq->frags.macSize; + + /* If pCmd->digestOffset is not located on last fragment */ + if(pCmd->digestOffset < pReq->frags.bufOffset) + { + /* Prepare dummy place for digest in SRAM */ + digestOffset = cesaSramVirtPtr->tempDigest - mvCesaSramAddrGet(); + } + else + { + digestOffset = pCmd->digestOffset - pReq->frags.bufOffset; + } + pReq->frags.newDigestOffset = digestOffset; + macTotalLen = pCmd->macLength; + + /* HW can't calculate the Digest correctly for fragmented packets + * in the following cases: + * - MV88F5182 || + * - MV88F5181L when total macLength more that 16 Kbytes || + * - total macLength more that 64 Kbytes + */ + if( (mvCtrlModelGet() == MV_5182_DEV_ID) || + ( (mvCtrlModelGet() == MV_5181_DEV_ID) && + (mvCtrlRevGet() >= MV_5181L_A0_REV) && + (pCmd->macLength >= (1 << 14)) ) ) + { + return MV_TERMINATE; + } + } + if( (pSA->config & MV_CESA_OPERATION_MASK) != + (MV_CESA_MAC_ONLY << MV_CESA_OPERATION_OFFSET) ) + { + cryptoDataSize = pCmd->cryptoLength - pReq->frags.cryptoSize; + } + + /* cryptoIvOffset - don't care */ + } + else + { + /* WA for MV88F5182 SHA1 and MD5 fragmentation mode */ + if( (mvCtrlModelGet() == MV_5182_DEV_ID) && + (((pSA->config & MV_CESA_MAC_MODE_MASK) == + (MV_CESA_MAC_MD5 << MV_CESA_MAC_MODE_OFFSET)) || + ((pSA->config & MV_CESA_MAC_MODE_MASK) == + (MV_CESA_MAC_SHA1 << MV_CESA_MAC_MODE_OFFSET))) ) + { + pReq->frags.newDigestOffset = cesaSramVirtPtr->tempDigest - mvCesaSramAddrGet(); + pReq->fragMode = MV_CESA_FRAG_LAST; + + return MV_TERMINATE; + } + /* Middle fragment */ + config = pSA->config | (MV_CESA_FRAG_MIDDLE << MV_CESA_FRAG_MODE_OFFSET); + copySize = sizeof(cesaSramVirtPtr->buf); + /* digestOffset and cryptoIvOffset - don't care */ + + /* Find fragment size */ + mvCesaFragSizeFind(pSA, pReq, cryptoOffset, macOffset, + ©Size, &cryptoDataSize, &macDataSize); + } + } + /********* Prepare DMA descriptors to copy from pSrc to SRAM *********/ + pMbuf = pCmd->pSrc; + i += mvCesaDmaCopyPrepare(pMbuf, pSramBuf + fixOffset, &pDmaDesc[i], + MV_FALSE, pReq->frags.bufOffset, copySize, pCmd->skipFlush); + + /* Prepare CESA descriptor to copy from DRAM to SRAM by DMA */ + mvCesaSramDescrBuild(config, frag, + cryptoOffset + fixOffset, cryptoIvOffset + fixOffset, + cryptoDataSize, macOffset + fixOffset, + digestOffset + fixOffset, macDataSize, macTotalLen, + pReq, &pDmaDesc[i]); + i++; + + /* Add special descriptor Ownership for CPU */ + pDmaDesc[i].byteCnt = 0; + pDmaDesc[i].phySrcAdd = 0; + pDmaDesc[i].phyDestAdd = 0; + i++; + + /********* Prepare DMA descriptors to copy from SRAM to pDst *********/ + pMbuf = pCmd->pDst; + i += mvCesaDmaCopyPrepare(pMbuf, pSramBuf + fixOffset, &pDmaDesc[i], + MV_TRUE, pReq->frags.bufOffset, copySize, pCmd->skipFlush); + + /* Next field of Last DMA descriptor must be NULL */ + pDmaDesc[i-1].phyNextDescPtr = 0; + pReq->dma[frag].pDmaLast = &pDmaDesc[i-1]; + mvOsCacheFlush(NULL, pReq->dma[frag].pDmaFirst, + i*sizeof(MV_DMA_DESC)); + + /*mvCesaDebugDescriptor(&cesaSramVirtPtr->desc[frag]);*/ + + pReq->frags.bufOffset += copySize; + pReq->frags.cryptoSize += cryptoDataSize; + pReq->frags.macSize += macDataSize; + + return MV_OK; +} + + +/******************************************************************************* +* mvCesaReqProcess - Process regular (Non-fragmented) request +* +* DESCRIPTION: +* This function processes the whole (not fragmented) request +* +* INPUT: +* MV_CESA_REQ* pReq - Pointer to the request in the request queue. +* +* RETURN: +* MV_OK - The request is successfully passed to HW for processing. +* Other - Failure. The request will not be processed +* +*******************************************************************************/ +static MV_STATUS mvCesaReqProcess(MV_CESA_REQ* pReq) +{ + MV_CESA_MBUF *pMbuf; + MV_DMA_DESC *pDmaDesc; + MV_U8 *pSramBuf; + int sid, i, fixOffset; + MV_CESA_SA *pSA; + MV_CESA_COMMAND *pCmd = pReq->pCmd; + + cesaStats.procCount++; + + sid = pCmd->sessionId; + pSA = &pCesaSAD[sid]; + pDmaDesc = pReq->dma[0].pDmaFirst; + pSramBuf = cesaSramVirtPtr->buf; + fixOffset = pReq->fixOffset; + +/* + mvOsPrintf("mvCesaReqProcess: sid=%d, pSA=%p, pDmaDesc=%p, pSramBuf=%p\n", + sid, pSA, pDmaDesc, pSramBuf); +*/ + i = 0; + + /* Crypto IV Special processing in CBC mode for Encryption direction */ + if( ((pSA->config & MV_CESA_OPERATION_MASK) != (MV_CESA_MAC_ONLY << MV_CESA_OPERATION_OFFSET)) && + ((pSA->config & MV_CESA_CRYPTO_MODE_MASK) == (MV_CESA_CRYPTO_CBC << MV_CESA_CRYPTO_MODE_BIT)) && + ((pSA->config & MV_CESA_DIRECTION_MASK) == (MV_CESA_DIR_ENCODE << MV_CESA_DIRECTION_BIT)) && + (pCmd->ivFromUser) ) + { + /* For Crypto Encode in CBC mode HW always takes IV from SRAM IVPointer, + * (not from IVBufPointer). So when ivFromUser==1, we should copy IV from user place + * in the buffer to SRAM IVPointer + */ + i += mvCesaDmaCopyPrepare(pCmd->pSrc, cesaSramVirtPtr->cryptoIV, &pDmaDesc[i], + MV_FALSE, pCmd->ivOffset, pSA->cryptoIvSize, pCmd->skipFlush); + } + + /* Update SA in SRAM */ + if(cesaLastSid != sid) + { + mvCesaSramSaUpdate(sid, &pDmaDesc[i]); + i++; + } + + /********* Prepare DMA descriptors to copy from pSrc to SRAM *********/ + pMbuf = pCmd->pSrc; + i += mvCesaDmaCopyPrepare(pMbuf, pSramBuf + fixOffset, &pDmaDesc[i], + MV_FALSE, 0, pMbuf->mbufSize, pCmd->skipFlush); + + /* Prepare Security Accelerator descriptor to SRAM words 0 - 7 */ + mvCesaSramDescrBuild(pSA->config, 0, pCmd->cryptoOffset + fixOffset, + pCmd->ivOffset + fixOffset, pCmd->cryptoLength, + pCmd->macOffset + fixOffset, pCmd->digestOffset + fixOffset, + pCmd->macLength, pCmd->macLength, pReq, &pDmaDesc[i]); + i++; + + /* Add special descriptor Ownership for CPU */ + pDmaDesc[i].byteCnt = 0; + pDmaDesc[i].phySrcAdd = 0; + pDmaDesc[i].phyDestAdd = 0; + i++; + + /********* Prepare DMA descriptors to copy from SRAM to pDst *********/ + pMbuf = pCmd->pDst; + i += mvCesaDmaCopyPrepare(pMbuf, pSramBuf + fixOffset, &pDmaDesc[i], + MV_TRUE, 0, pMbuf->mbufSize, pCmd->skipFlush); + + /* Next field of Last DMA descriptor must be NULL */ + pDmaDesc[i-1].phyNextDescPtr = 0; + pReq->dma[0].pDmaLast = &pDmaDesc[i-1]; + mvOsCacheFlush(NULL, pReq->dma[0].pDmaFirst, i*sizeof(MV_DMA_DESC)); + + return MV_OK; +} + + +/******************************************************************************* +* mvCesaSramDescrBuild - Set CESA descriptor in SRAM +* +* DESCRIPTION: +* This function builds CESA descriptor in SRAM from all Command parameters +* +* +* INPUT: +* int chan - CESA channel uses the descriptor +* MV_U32 config - 32 bits of WORD_0 in CESA descriptor structure +* int cryptoOffset - Offset from the beginning of SRAM buffer where +* data for encryption/decription is started. +* int ivOffset - Offset of crypto IV from the SRAM base. Valid only +* for first fragment. +* int cryptoLength - Size (in bytes) of data for encryption/descryption +* operation on this fragment. +* int macOffset - Offset from the beginning of SRAM buffer where +* data for Authentication is started +* int digestOffset - Offset from the beginning of SRAM buffer where +* digest is located. Valid for first and last fragments. +* int macLength - Size (in bytes) of data for Authentication +* operation on this fragment. +* int macTotalLen - Toatl size (in bytes) of data for Authentication +* operation on the whole request (packet). Valid for +* last fragment only. +* +* RETURN: None +* +*******************************************************************************/ +static void mvCesaSramDescrBuild(MV_U32 config, int frag, + int cryptoOffset, int ivOffset, int cryptoLength, + int macOffset, int digestOffset, int macLength, + int macTotalLen, MV_CESA_REQ* pReq, MV_DMA_DESC* pDmaDesc) +{ + MV_CESA_DESC* pCesaDesc = &pReq->pCesaDesc[frag]; + MV_CESA_DESC* pSramDesc = pSramDesc = &cesaSramVirtPtr->desc; + MV_U16 sramBufOffset = (MV_U16)((MV_U8*)cesaSramVirtPtr->buf - mvCesaSramAddrGet()); + + pCesaDesc->config = MV_32BIT_LE(config); + + if( (config & MV_CESA_OPERATION_MASK) != + (MV_CESA_MAC_ONLY << MV_CESA_OPERATION_OFFSET) ) + { + /* word 1 */ + pCesaDesc->cryptoSrcOffset = MV_16BIT_LE(sramBufOffset + cryptoOffset); + pCesaDesc->cryptoDstOffset = MV_16BIT_LE(sramBufOffset + cryptoOffset); + /* word 2 */ + pCesaDesc->cryptoDataLen = MV_16BIT_LE(cryptoLength); + /* word 3 */ + pCesaDesc->cryptoKeyOffset = MV_16BIT_LE((MV_U16)(cesaSramVirtPtr->sramSA.cryptoKey - + mvCesaSramAddrGet())); + /* word 4 */ + pCesaDesc->cryptoIvOffset = MV_16BIT_LE((MV_U16)(cesaSramVirtPtr->cryptoIV - + mvCesaSramAddrGet())); + pCesaDesc->cryptoIvBufOffset = MV_16BIT_LE(sramBufOffset + ivOffset); + } + + if( (config & MV_CESA_OPERATION_MASK) != + (MV_CESA_CRYPTO_ONLY << MV_CESA_OPERATION_OFFSET) ) + { + /* word 5 */ + pCesaDesc->macSrcOffset = MV_16BIT_LE(sramBufOffset + macOffset); + pCesaDesc->macTotalLen = MV_16BIT_LE(macTotalLen); + + /* word 6 */ + pCesaDesc->macDigestOffset = MV_16BIT_LE(sramBufOffset + digestOffset); + pCesaDesc->macDataLen = MV_16BIT_LE(macLength); + + /* word 7 */ + pCesaDesc->macInnerIvOffset = MV_16BIT_LE((MV_U16)(cesaSramVirtPtr->sramSA.macInnerIV - + mvCesaSramAddrGet())); + pCesaDesc->macOuterIvOffset = MV_16BIT_LE((MV_U16)(cesaSramVirtPtr->sramSA.macOuterIV - + mvCesaSramAddrGet())); + } + /* Prepare DMA descriptor to CESA descriptor from DRAM to SRAM */ + pDmaDesc->phySrcAdd = MV_32BIT_LE(mvCesaVirtToPhys(&pReq->cesaDescBuf, pCesaDesc)); + pDmaDesc->phyDestAdd = MV_32BIT_LE(mvCesaSramVirtToPhys(NULL, (MV_U8*)pSramDesc)); + pDmaDesc->byteCnt = MV_32BIT_LE(sizeof(MV_CESA_DESC) | BIT31); + + /* flush Source buffer */ + mvOsCacheFlush(NULL, pCesaDesc, sizeof(MV_CESA_DESC)); +} + +/******************************************************************************* +* mvCesaSramSaUpdate - Move required SA information to SRAM if needed. +* +* DESCRIPTION: +* Copy to SRAM values of the required SA. +* +* +* INPUT: +* short sid - Session ID needs SRAM Cache update +* MV_DMA_DESC *pDmaDesc - Pointer to DMA descriptor used to +* copy SA values from DRAM to SRAM. +* +* RETURN: +* MV_OK - Cache entry for this SA copied to SRAM. +* MV_NO_CHANGE - Cache entry for this SA already exist in SRAM +* +*******************************************************************************/ +static INLINE void mvCesaSramSaUpdate(short sid, MV_DMA_DESC *pDmaDesc) +{ + MV_CESA_SA *pSA = &pCesaSAD[sid]; + + /* Prepare DMA descriptor to Copy CACHE_SA from SA database in DRAM to SRAM */ + pDmaDesc->byteCnt = MV_32BIT_LE(sizeof(MV_CESA_SRAM_SA) | BIT31); + pDmaDesc->phySrcAdd = MV_32BIT_LE(mvCesaVirtToPhys(&cesaSramSaBuf, pSA->pSramSA)); + pDmaDesc->phyDestAdd = + MV_32BIT_LE(mvCesaSramVirtToPhys(NULL, (MV_U8*)&cesaSramVirtPtr->sramSA)); + + /* Source buffer is already flushed during OpenSession*/ + /*mvOsCacheFlush(NULL, &pSA->sramSA, sizeof(MV_CESA_SRAM_SA));*/ +} + +/******************************************************************************* +* mvCesaDmaCopyPrepare - prepare DMA descriptor list to copy data presented by +* Mbuf structure from DRAM to SRAM +* +* DESCRIPTION: +* +* +* INPUT: +* MV_CESA_MBUF* pMbuf - pointer to Mbuf structure contains request +* data in DRAM +* MV_U8* pSramBuf - pointer to buffer in SRAM where data should +* be copied to. +* MV_DMA_DESC* pDmaDesc - pointer to first DMA descriptor for this copy. +* The function set number of DMA descriptors needed +* to copy the copySize bytes from Mbuf. +* MV_BOOL isToMbuf - Copy direction. +* MV_TRUE means copy from SRAM buffer to Mbuf in DRAM. +* MV_FALSE means copy from Mbuf in DRAM to SRAM buffer. +* int offset - Offset in the Mbuf structure that copy should be +* started from. +* int copySize - Size of data should be copied. +* +* RETURN: +* int - number of DMA descriptors used for the copy. +* +*******************************************************************************/ +#ifndef MV_NETBSD +static INLINE int mvCesaDmaCopyPrepare(MV_CESA_MBUF* pMbuf, MV_U8* pSramBuf, + MV_DMA_DESC* pDmaDesc, MV_BOOL isToMbuf, + int offset, int copySize, MV_BOOL skipFlush) +{ + int bufOffset, bufSize, size, frag, i; + MV_U8* pBuf; + + i = 0; + + /* Calculate start place for copy: fragment number and offset in the fragment */ + frag = mvCesaMbufOffset(pMbuf, offset, &bufOffset); + bufSize = pMbuf->pFrags[frag].bufSize - bufOffset; + pBuf = pMbuf->pFrags[frag].bufVirtPtr + bufOffset; + + /* Size accumulate total copy size */ + size = 0; + + /* Create DMA lists to copy mBuf from pSrc to SRAM */ + while(size < copySize) + { + /* Find copy size for each DMA descriptor */ + bufSize = MV_MIN(bufSize, (copySize - size)); + pDmaDesc[i].byteCnt = MV_32BIT_LE(bufSize | BIT31); + if(isToMbuf) + { + pDmaDesc[i].phyDestAdd = MV_32BIT_LE(mvOsIoVirtToPhy(NULL, pBuf)); + pDmaDesc[i].phySrcAdd = + MV_32BIT_LE(mvCesaSramVirtToPhys(NULL, (pSramBuf + size))); + /* invalidate the buffer */ + if(skipFlush == MV_FALSE) + mvOsCacheInvalidate(NULL, pBuf, bufSize); + } + else + { + pDmaDesc[i].phySrcAdd = MV_32BIT_LE(mvOsIoVirtToPhy(NULL, pBuf)); + pDmaDesc[i].phyDestAdd = + MV_32BIT_LE(mvCesaSramVirtToPhys(NULL, (pSramBuf + size))); + /* flush the buffer */ + if(skipFlush == MV_FALSE) + mvOsCacheFlush(NULL, pBuf, bufSize); + } + + /* Count number of used DMA descriptors */ + i++; + size += bufSize; + + /* go to next fragment in the Mbuf */ + frag++; + pBuf = pMbuf->pFrags[frag].bufVirtPtr; + bufSize = pMbuf->pFrags[frag].bufSize; + } + return i; +} +#else /* MV_NETBSD */ +static int mvCesaDmaCopyPrepare(MV_CESA_MBUF* pMbuf, MV_U8* pSramBuf, + MV_DMA_DESC* pDmaDesc, MV_BOOL isToMbuf, + int offset, int copySize, MV_BOOL skipFlush) +{ + int bufOffset, bufSize, thisSize, size, frag, i; + MV_ULONG bufPhys, sramPhys; + MV_U8* pBuf; + + /* + * Calculate start place for copy: fragment number and offset in + * the fragment + */ + frag = mvCesaMbufOffset(pMbuf, offset, &bufOffset); + + /* + * Get SRAM physical address only once. We can update it in-place + * as we build the descriptor chain. + */ + sramPhys = mvCesaSramVirtToPhys(NULL, pSramBuf); + + /* + * 'size' accumulates total copy size, 'i' counts desccriptors. + */ + size = i = 0; + + /* Create DMA lists to copy mBuf from pSrc to SRAM */ + while (size < copySize) { + /* + * Calculate # of bytes to copy from the current fragment, + * and the pointer to the start of data + */ + bufSize = pMbuf->pFrags[frag].bufSize - bufOffset; + pBuf = pMbuf->pFrags[frag].bufVirtPtr + bufOffset; + bufOffset = 0; /* First frag may be non-zero */ + frag++; + + /* + * As long as there is data in the current fragment... + */ + while (bufSize > 0) { + /* + * Ensure we don't cross an MMU page boundary. + * XXX: This is NetBSD-specific, but it is a + * quick and dirty way to fix the problem. + * A true HAL would rely on the OS-specific + * driver to do this... + */ + thisSize = PAGE_SIZE - + (((MV_ULONG)pBuf) & (PAGE_SIZE - 1)); + thisSize = MV_MIN(bufSize, thisSize); + /* + * Make sure we don't copy more than requested + */ + if (thisSize > (copySize - size)) { + thisSize = copySize - size; + bufSize = 0; + } + + /* + * Physicall address of this fragment + */ + bufPhys = MV_32BIT_LE(mvOsIoVirtToPhy(NULL, pBuf)); + + /* + * Set up the descriptor + */ + pDmaDesc[i].byteCnt = MV_32BIT_LE(thisSize | BIT31); + if(isToMbuf) { + pDmaDesc[i].phyDestAdd = bufPhys; + pDmaDesc[i].phySrcAdd = MV_32BIT_LE(sramPhys); + /* invalidate the buffer */ + if(skipFlush == MV_FALSE) + mvOsCacheInvalidate(NULL, pBuf, thisSize); + } else { + pDmaDesc[i].phySrcAdd = bufPhys; + pDmaDesc[i].phyDestAdd = MV_32BIT_LE(sramPhys); + /* flush the buffer */ + if(skipFlush == MV_FALSE) + mvOsCacheFlush(NULL, pBuf, thisSize); + } + + pDmaDesc[i].phyNextDescPtr = + MV_32BIT_LE(mvOsIoVirtToPhy(NULL,(&pDmaDesc[i+1]))); + + /* flush the DMA desc */ + mvOsCacheFlush(NULL, &pDmaDesc[i], sizeof(MV_DMA_DESC)); + + /* Update state */ + bufSize -= thisSize; + sramPhys += thisSize; + pBuf += thisSize; + size += thisSize; + i++; + } + } + + return i; +} +#endif /* MV_NETBSD */ +/******************************************************************************* +* mvCesaHmacIvGet - Calculate Inner and Outter values from HMAC key +* +* DESCRIPTION: +* This function calculate Inner and Outer values used for HMAC algorithm. +* This operation allows improve performance fro the whole HMAC processing. +* +* INPUT: +* MV_CESA_MAC_MODE macMode - Authentication mode: HMAC_MD5 or HMAC_SHA1. +* unsigned char key[] - Pointer to HMAC key. +* int keyLength - Size of HMAC key (maximum 64 bytes) +* +* OUTPUT: +* unsigned char innerIV[] - HASH(key^inner) +* unsigned char outerIV[] - HASH(key^outter) +* +* RETURN: None +* +*******************************************************************************/ +static void mvCesaHmacIvGet(MV_CESA_MAC_MODE macMode, unsigned char key[], int keyLength, + unsigned char innerIV[], unsigned char outerIV[]) +{ + unsigned char inner[MV_CESA_MAX_MAC_KEY_LENGTH]; + unsigned char outer[MV_CESA_MAX_MAC_KEY_LENGTH]; + int i, digestSize = 0; +#if defined(MV_CPU_LE) || defined(MV_PPC) + MV_U32 swapped32, val32, *pVal32; +#endif + for(i=0; ipFrags[frag].bufVirtPtr + fragOffset; + size = pMbuf->pFrags[frag].bufSize - fragOffset; + + /* Complete Inner part */ + while(macLeftSize > 0) + { + if(macLeftSize <= size) + { + mvSHA1Update(&ctx, pData, macLeftSize); + break; + } + mvSHA1Update(&ctx, pData, size); + macLeftSize -= size; + frag++; + pData = pMbuf->pFrags[frag].bufVirtPtr; + size = pMbuf->pFrags[frag].bufSize; + } + mvSHA1Final(pDigest, &ctx); +/* + mvOsPrintf("mvCesaFragSha1Complete: pOuterIV=%p, macLeftSize=%d, macTotalSize=%d\n", + pOuterIV, macLeftSize, macTotalSize); + mvDebugMemDump(pDigest, MV_CESA_SHA1_DIGEST_SIZE, 1); +*/ + + if(pOuterIV != NULL) + { + /* If HMAC - Complete Outer part */ + for(i=0; ipFrags[frag].bufVirtPtr + fragOffset; + size = pMbuf->pFrags[frag].bufSize - fragOffset; + + /* Complete Inner part */ + while(macLeftSize > 0) + { + if(macLeftSize <= size) + { + mvMD5Update(&ctx, pData, macLeftSize); + break; + } + mvMD5Update(&ctx, pData, size); + macLeftSize -= size; + frag++; + pData = pMbuf->pFrags[frag].bufVirtPtr; + size = pMbuf->pFrags[frag].bufSize; + } + mvMD5Final(pDigest, &ctx); + +/* + mvOsPrintf("mvCesaFragMd5Complete: pOuterIV=%p, macLeftSize=%d, macTotalSize=%d\n", + pOuterIV, macLeftSize, macTotalSize); + mvDebugMemDump(pDigest, MV_CESA_MD5_DIGEST_SIZE, 1); +*/ + if(pOuterIV != NULL) + { + /* Complete Outer part */ + for(i=0; ipCmd; + MV_U8* pDigest; + MV_CESA_MAC_MODE macMode; + MV_U8* pOuterIV = NULL; + + /* Copy data from Source fragment to Destination */ + if(pCmd->pSrc != pCmd->pDst) + { + mvCesaMbufCopy(pCmd->pDst, pReq->frags.bufOffset, + pCmd->pSrc, pReq->frags.bufOffset, macDataSize); + } + +/* + mvCesaCopyFromMbuf(cesaSramVirtPtr->buf[0], pCmd->pSrc, pReq->frags.bufOffset, macDataSize); + mvCesaCopyToMbuf(cesaSramVirtPtr->buf[0], pCmd->pDst, pReq->frags.bufOffset, macDataSize); +*/ + pDigest = (mvCesaSramAddrGet() + pReq->frags.newDigestOffset); + + macMode = (pSA->config & MV_CESA_MAC_MODE_MASK) >> MV_CESA_MAC_MODE_OFFSET; +/* + mvOsPrintf("macDataSize=%d, macLength=%d, digestOffset=%d, macMode=%d\n", + macDataSize, pCmd->macLength, pCmd->digestOffset, macMode); +*/ + switch(macMode) + { + case MV_CESA_MAC_HMAC_MD5: + pOuterIV = pSA->pSramSA->macOuterIV; + + case MV_CESA_MAC_MD5: + mvCesaFragMd5Complete(pCmd->pDst, pReq->frags.bufOffset, pOuterIV, + macDataSize, pCmd->macLength, pDigest); + break; + + case MV_CESA_MAC_HMAC_SHA1: + pOuterIV = pSA->pSramSA->macOuterIV; + + case MV_CESA_MAC_SHA1: + mvCesaFragSha1Complete(pCmd->pDst, pReq->frags.bufOffset, pOuterIV, + macDataSize, pCmd->macLength, pDigest); + break; + + default: + mvOsPrintf("mvCesaFragAuthComplete: Unexpected macMode %d\n", macMode); + return MV_BAD_PARAM; + } + return MV_OK; +} + +/******************************************************************************* +* mvCesaCtrModeInit - +* +* DESCRIPTION: +* +* +* INPUT: NONE +* +* +* RETURN: +* MV_CESA_COMMAND* +* +*******************************************************************************/ +static MV_CESA_COMMAND* mvCesaCtrModeInit(void) +{ + MV_CESA_MBUF *pMbuf; + MV_U8 *pBuf; + MV_CESA_COMMAND *pCmd; + + pBuf = mvOsMalloc(sizeof(MV_CESA_COMMAND) + + sizeof(MV_CESA_MBUF) + sizeof(MV_BUF_INFO) + 100); + if(pBuf == NULL) + { + mvOsPrintf("mvCesaSessionOpen: Can't allocate %u bytes for CTR Mode\n", + sizeof(MV_CESA_COMMAND) + sizeof(MV_CESA_MBUF) + sizeof(MV_BUF_INFO) ); + return NULL; + } + pCmd = (MV_CESA_COMMAND*)pBuf; + pBuf += sizeof(MV_CESA_COMMAND); + + pMbuf = (MV_CESA_MBUF*)pBuf; + pBuf += sizeof(MV_CESA_MBUF); + + pMbuf->pFrags = (MV_BUF_INFO*)pBuf; + + pMbuf->numFrags = 1; + pCmd->pSrc = pMbuf; + pCmd->pDst = pMbuf; +/* + mvOsPrintf("CtrModeInit: pCmd=%p, pSrc=%p, pDst=%p, pFrags=%p\n", + pCmd, pCmd->pSrc, pCmd->pDst, + pMbuf->pFrags); +*/ + return pCmd; +} + +/******************************************************************************* +* mvCesaCtrModePrepare - +* +* DESCRIPTION: +* +* +* INPUT: +* MV_CESA_COMMAND *pCtrModeCmd, MV_CESA_COMMAND *pCmd +* +* RETURN: +* MV_STATUS +* +*******************************************************************************/ +static MV_STATUS mvCesaCtrModePrepare(MV_CESA_COMMAND *pCtrModeCmd, MV_CESA_COMMAND *pCmd) +{ + MV_CESA_MBUF *pMbuf; + MV_U8 *pBuf, *pIV; + MV_U32 counter, *pCounter; + int cryptoSize = MV_ALIGN_UP(pCmd->cryptoLength, MV_CESA_AES_BLOCK_SIZE); +/* + mvOsPrintf("CtrModePrepare: pCmd=%p, pCtrSrc=%p, pCtrDst=%p, pOrgCmd=%p, pOrgSrc=%p, pOrgDst=%p\n", + pCmd, pCmd->pSrc, pCmd->pDst, + pCtrModeCmd, pCtrModeCmd->pSrc, pCtrModeCmd->pDst); +*/ + pMbuf = pCtrModeCmd->pSrc; + + /* Allocate buffer for Key stream */ + pBuf = mvOsIoCachedMalloc(cesaOsHandle,cryptoSize, + &pMbuf->pFrags[0].bufPhysAddr, + &pMbuf->pFrags[0].memHandle); + if(pBuf == NULL) + { + mvOsPrintf("mvCesaCtrModePrepare: Can't allocate %d bytes\n", cryptoSize); + return MV_OUT_OF_CPU_MEM; + } + memset(pBuf, 0, cryptoSize); + mvOsCacheFlush(NULL, pBuf, cryptoSize); + + pMbuf->pFrags[0].bufVirtPtr = pBuf; + pMbuf->mbufSize = cryptoSize; + pMbuf->pFrags[0].bufSize = cryptoSize; + + pCtrModeCmd->pReqPrv = pCmd->pReqPrv; + pCtrModeCmd->sessionId = pCmd->sessionId; + + /* ivFromUser and ivOffset are don't care */ + pCtrModeCmd->cryptoOffset = 0; + pCtrModeCmd->cryptoLength = cryptoSize; + + /* digestOffset, macOffset and macLength are don't care */ + + mvCesaCopyFromMbuf(pBuf, pCmd->pSrc, pCmd->ivOffset, MV_CESA_AES_BLOCK_SIZE); + pCounter = (MV_U32*)(pBuf + (MV_CESA_AES_BLOCK_SIZE - sizeof(counter))); + counter = *pCounter; + counter = MV_32BIT_BE(counter); + pIV = pBuf; + cryptoSize -= MV_CESA_AES_BLOCK_SIZE; + + /* fill key stream */ + while(cryptoSize > 0) + { + pBuf += MV_CESA_AES_BLOCK_SIZE; + memcpy(pBuf, pIV, MV_CESA_AES_BLOCK_SIZE - sizeof(counter)); + pCounter = (MV_U32*)(pBuf + (MV_CESA_AES_BLOCK_SIZE - sizeof(counter))); + counter++; + *pCounter = MV_32BIT_BE(counter); + cryptoSize -= MV_CESA_AES_BLOCK_SIZE; + } + + return MV_OK; +} + +/******************************************************************************* +* mvCesaCtrModeComplete - +* +* DESCRIPTION: +* +* +* INPUT: +* MV_CESA_COMMAND *pOrgCmd, MV_CESA_COMMAND *pCmd +* +* RETURN: +* MV_STATUS +* +*******************************************************************************/ +static MV_STATUS mvCesaCtrModeComplete(MV_CESA_COMMAND *pOrgCmd, MV_CESA_COMMAND *pCmd) +{ + int srcFrag, dstFrag, srcOffset, dstOffset, keyOffset, srcSize, dstSize; + int cryptoSize = pCmd->cryptoLength; + MV_U8 *pSrc, *pDst, *pKey; + MV_STATUS status = MV_OK; +/* + mvOsPrintf("CtrModeComplete: pCmd=%p, pCtrSrc=%p, pCtrDst=%p, pOrgCmd=%p, pOrgSrc=%p, pOrgDst=%p\n", + pCmd, pCmd->pSrc, pCmd->pDst, + pOrgCmd, pOrgCmd->pSrc, pOrgCmd->pDst); +*/ + /* XOR source data with key stream to destination data */ + pKey = pCmd->pDst->pFrags[0].bufVirtPtr; + keyOffset = 0; + + if( (pOrgCmd->pSrc != pOrgCmd->pDst) && + (pOrgCmd->cryptoOffset > 0) ) + { + /* Copy Prefix from source buffer to destination buffer */ + + status = mvCesaMbufCopy(pOrgCmd->pDst, 0, + pOrgCmd->pSrc, 0, pOrgCmd->cryptoOffset); +/* + status = mvCesaCopyFromMbuf(tempBuf, pOrgCmd->pSrc, + 0, pOrgCmd->cryptoOffset); + status = mvCesaCopyToMbuf(tempBuf, pOrgCmd->pDst, + 0, pOrgCmd->cryptoOffset); +*/ + } + + srcFrag = mvCesaMbufOffset(pOrgCmd->pSrc, pOrgCmd->cryptoOffset, &srcOffset); + pSrc = pOrgCmd->pSrc->pFrags[srcFrag].bufVirtPtr; + srcSize = pOrgCmd->pSrc->pFrags[srcFrag].bufSize; + + dstFrag = mvCesaMbufOffset(pOrgCmd->pDst, pOrgCmd->cryptoOffset, &dstOffset); + pDst = pOrgCmd->pDst->pFrags[dstFrag].bufVirtPtr; + dstSize = pOrgCmd->pDst->pFrags[dstFrag].bufSize; + + while(cryptoSize > 0) + { + pDst[dstOffset] = (pSrc[srcOffset] ^ pKey[keyOffset]); + + cryptoSize--; + dstOffset++; + srcOffset++; + keyOffset++; + + if(srcOffset >= srcSize) + { + srcFrag++; + srcOffset = 0; + pSrc = pOrgCmd->pSrc->pFrags[srcFrag].bufVirtPtr; + srcSize = pOrgCmd->pSrc->pFrags[srcFrag].bufSize; + } + + if(dstOffset >= dstSize) + { + dstFrag++; + dstOffset = 0; + pDst = pOrgCmd->pDst->pFrags[dstFrag].bufVirtPtr; + dstSize = pOrgCmd->pDst->pFrags[dstFrag].bufSize; + } + } + + if(pOrgCmd->pSrc != pOrgCmd->pDst) + { + /* Copy Suffix from source buffer to destination buffer */ + srcOffset = pOrgCmd->cryptoOffset + pOrgCmd->cryptoLength; + + if( (pOrgCmd->pDst->mbufSize - srcOffset) > 0) + { + status = mvCesaMbufCopy(pOrgCmd->pDst, srcOffset, + pOrgCmd->pSrc, srcOffset, + pOrgCmd->pDst->mbufSize - srcOffset); + } + +/* + status = mvCesaCopyFromMbuf(tempBuf, pOrgCmd->pSrc, + srcOffset, pOrgCmd->pSrc->mbufSize - srcOffset); + status = mvCesaCopyToMbuf(tempBuf, pOrgCmd->pDst, + srcOffset, pOrgCmd->pDst->mbufSize - srcOffset); +*/ + } + + /* Free buffer used for Key stream */ + mvOsIoCachedFree(cesaOsHandle,pCmd->pDst->pFrags[0].bufSize, + pCmd->pDst->pFrags[0].bufPhysAddr, + pCmd->pDst->pFrags[0].bufVirtPtr, + pCmd->pDst->pFrags[0].memHandle); + + return MV_OK; +} + +/******************************************************************************* +* mvCesaCtrModeFinish - +* +* DESCRIPTION: +* +* +* INPUT: +* MV_CESA_COMMAND* pCmd +* +* RETURN: +* MV_STATUS +* +*******************************************************************************/ +static void mvCesaCtrModeFinish(MV_CESA_COMMAND* pCmd) +{ + mvOsFree(pCmd); +} + +/******************************************************************************* +* mvCesaParamCheck - +* +* DESCRIPTION: +* +* +* INPUT: +* MV_CESA_SA* pSA, MV_CESA_COMMAND *pCmd, MV_U8* pFixOffset +* +* RETURN: +* MV_STATUS +* +*******************************************************************************/ +static MV_STATUS mvCesaParamCheck(MV_CESA_SA* pSA, MV_CESA_COMMAND *pCmd, + MV_U8* pFixOffset) +{ + MV_U8 fixOffset = 0xFF; + + /* Check AUTH operation parameters */ + if( ((pSA->config & MV_CESA_OPERATION_MASK) != + (MV_CESA_CRYPTO_ONLY << MV_CESA_OPERATION_OFFSET)) ) + { + /* MAC offset should be at least 4 byte aligned */ + if( MV_IS_NOT_ALIGN(pCmd->macOffset, 4) ) + { + mvOsPrintf("mvCesaAction: macOffset %d must be 4 byte aligned\n", + pCmd->macOffset); + return MV_BAD_PARAM; + } + /* Digest offset must be 4 byte aligned */ + if( MV_IS_NOT_ALIGN(pCmd->digestOffset, 4) ) + { + mvOsPrintf("mvCesaAction: digestOffset %d must be 4 byte aligned\n", + pCmd->digestOffset); + return MV_BAD_PARAM; + } + /* In addition all offsets should be the same alignment: 8 or 4 */ + if(fixOffset == 0xFF) + { + fixOffset = (pCmd->macOffset % 8); + } + else + { + if( (pCmd->macOffset % 8) != fixOffset) + { + mvOsPrintf("mvCesaAction: macOffset %d mod 8 must be equal %d\n", + pCmd->macOffset, fixOffset); + return MV_BAD_PARAM; + } + } + if( (pCmd->digestOffset % 8) != fixOffset) + { + mvOsPrintf("mvCesaAction: digestOffset %d mod 8 must be equal %d\n", + pCmd->digestOffset, fixOffset); + return MV_BAD_PARAM; + } + } + /* Check CRYPTO operation parameters */ + if( ((pSA->config & MV_CESA_OPERATION_MASK) != + (MV_CESA_MAC_ONLY << MV_CESA_OPERATION_OFFSET)) ) + { + /* CryptoOffset should be at least 4 byte aligned */ + if( MV_IS_NOT_ALIGN(pCmd->cryptoOffset, 4) ) + { + mvOsPrintf("CesaAction: cryptoOffset=%d must be 4 byte aligned\n", + pCmd->cryptoOffset); + return MV_BAD_PARAM; + } + /* cryptoLength should be the whole number of blocks */ + if( MV_IS_NOT_ALIGN(pCmd->cryptoLength, pSA->cryptoBlockSize) ) + { + mvOsPrintf("mvCesaAction: cryptoLength=%d must be %d byte aligned\n", + pCmd->cryptoLength, pSA->cryptoBlockSize); + return MV_BAD_PARAM; + } + if(fixOffset == 0xFF) + { + fixOffset = (pCmd->cryptoOffset % 8); + } + else + { + /* In addition all offsets should be the same alignment: 8 or 4 */ + if( (pCmd->cryptoOffset % 8) != fixOffset) + { + mvOsPrintf("mvCesaAction: cryptoOffset %d mod 8 must be equal %d \n", + pCmd->cryptoOffset, fixOffset); + return MV_BAD_PARAM; + } + } + + /* check for CBC mode */ + if(pSA->cryptoIvSize > 0) + { + /* cryptoIV must not be part of CryptoLength */ + if( ((pCmd->ivOffset + pSA->cryptoIvSize) > pCmd->cryptoOffset) && + (pCmd->ivOffset < (pCmd->cryptoOffset + pCmd->cryptoLength)) ) + { + mvOsPrintf("mvCesaFragParamCheck: cryptoIvOffset (%d) is part of cryptoLength (%d+%d)\n", + pCmd->ivOffset, pCmd->macOffset, pCmd->macLength); + return MV_BAD_PARAM; + } + + /* ivOffset must be 4 byte aligned */ + if( MV_IS_NOT_ALIGN(pCmd->ivOffset, 4) ) + { + mvOsPrintf("CesaAction: ivOffset=%d must be 4 byte aligned\n", + pCmd->ivOffset); + return MV_BAD_PARAM; + } + /* In addition all offsets should be the same alignment: 8 or 4 */ + if( (pCmd->ivOffset % 8) != fixOffset) + { + mvOsPrintf("mvCesaAction: ivOffset %d mod 8 must be %d\n", + pCmd->ivOffset, fixOffset); + return MV_BAD_PARAM; + } + } + } + return MV_OK; +} + +/******************************************************************************* +* mvCesaFragParamCheck - +* +* DESCRIPTION: +* +* +* INPUT: +* MV_CESA_SA* pSA, MV_CESA_COMMAND *pCmd +* +* RETURN: +* MV_STATUS +* +*******************************************************************************/ +static MV_STATUS mvCesaFragParamCheck(MV_CESA_SA* pSA, MV_CESA_COMMAND *pCmd) +{ + int offset; + + if( ((pSA->config & MV_CESA_OPERATION_MASK) != + (MV_CESA_CRYPTO_ONLY << MV_CESA_OPERATION_OFFSET)) ) + { + /* macOffset must be less that SRAM buffer size */ + if(pCmd->macOffset > (sizeof(cesaSramVirtPtr->buf) - MV_CESA_AUTH_BLOCK_SIZE)) + { + mvOsPrintf("mvCesaFragParamCheck: macOffset is too large (%d)\n", + pCmd->macOffset); + return MV_BAD_PARAM; + } + /* macOffset+macSize must be more than mbufSize - SRAM buffer size */ + if( ((pCmd->macOffset + pCmd->macLength) > pCmd->pSrc->mbufSize) || + ((pCmd->pSrc->mbufSize - (pCmd->macOffset + pCmd->macLength)) >= + sizeof(cesaSramVirtPtr->buf)) ) + { + mvOsPrintf("mvCesaFragParamCheck: macLength is too large (%d), mbufSize=%d\n", + pCmd->macLength, pCmd->pSrc->mbufSize); + return MV_BAD_PARAM; + } + } + + if( ((pSA->config & MV_CESA_OPERATION_MASK) != + (MV_CESA_MAC_ONLY << MV_CESA_OPERATION_OFFSET)) ) + { + /* cryptoOffset must be less that SRAM buffer size */ + /* 4 for possible fixOffset */ + if( (pCmd->cryptoOffset + 4) > (sizeof(cesaSramVirtPtr->buf) - pSA->cryptoBlockSize)) + { + mvOsPrintf("mvCesaFragParamCheck: cryptoOffset is too large (%d)\n", + pCmd->cryptoOffset); + return MV_BAD_PARAM; + } + + /* cryptoOffset+cryptoSize must be more than mbufSize - SRAM buffer size */ + if( ((pCmd->cryptoOffset + pCmd->cryptoLength) > pCmd->pSrc->mbufSize) || + ((pCmd->pSrc->mbufSize - (pCmd->cryptoOffset + pCmd->cryptoLength)) >= + (sizeof(cesaSramVirtPtr->buf) - pSA->cryptoBlockSize)) ) + { + mvOsPrintf("mvCesaFragParamCheck: cryptoLength is too large (%d), mbufSize=%d\n", + pCmd->cryptoLength, pCmd->pSrc->mbufSize); + return MV_BAD_PARAM; + } + } + + /* When MAC_THEN_CRYPTO or CRYPTO_THEN_MAC */ + if( ((pSA->config & MV_CESA_OPERATION_MASK) == + (MV_CESA_MAC_THEN_CRYPTO << MV_CESA_OPERATION_OFFSET)) || + ((pSA->config & MV_CESA_OPERATION_MASK) == + (MV_CESA_CRYPTO_THEN_MAC << MV_CESA_OPERATION_OFFSET)) ) + { + if( (mvCtrlModelGet() == MV_5182_DEV_ID) || + ( (mvCtrlModelGet() == MV_5181_DEV_ID) && + (mvCtrlRevGet() >= MV_5181L_A0_REV) && + (pCmd->macLength >= (1 << 14)) ) ) + { + return MV_NOT_ALLOWED; + } + + /* abs(cryptoOffset-macOffset) must be aligned cryptoBlockSize */ + if(pCmd->cryptoOffset > pCmd->macOffset) + { + offset = pCmd->cryptoOffset - pCmd->macOffset; + } + else + { + offset = pCmd->macOffset - pCmd->cryptoOffset; + } + + if( MV_IS_NOT_ALIGN(offset, pSA->cryptoBlockSize) ) + { +/* + mvOsPrintf("mvCesaFragParamCheck: (cryptoOffset - macOffset) must be %d byte aligned\n", + pSA->cryptoBlockSize); +*/ + return MV_NOT_ALLOWED; + } + /* Digest must not be part of CryptoLength */ + if( ((pCmd->digestOffset + pSA->digestSize) > pCmd->cryptoOffset) && + (pCmd->digestOffset < (pCmd->cryptoOffset + pCmd->cryptoLength)) ) + { +/* + mvOsPrintf("mvCesaFragParamCheck: digestOffset (%d) is part of cryptoLength (%d+%d)\n", + pCmd->digestOffset, pCmd->cryptoOffset, pCmd->cryptoLength); +*/ + return MV_NOT_ALLOWED; + } + } + return MV_OK; +} + +/******************************************************************************* +* mvCesaFragSizeFind - +* +* DESCRIPTION: +* +* +* INPUT: +* MV_CESA_SA* pSA, MV_CESA_COMMAND *pCmd, +* int cryptoOffset, int macOffset, +* +* OUTPUT: +* int* pCopySize, int* pCryptoDataSize, int* pMacDataSize +* +* RETURN: +* MV_STATUS +* +*******************************************************************************/ +static void mvCesaFragSizeFind(MV_CESA_SA* pSA, MV_CESA_REQ* pReq, + int cryptoOffset, int macOffset, + int* pCopySize, int* pCryptoDataSize, int* pMacDataSize) +{ + MV_CESA_COMMAND *pCmd = pReq->pCmd; + int cryptoDataSize, macDataSize, copySize; + + cryptoDataSize = macDataSize = 0; + copySize = *pCopySize; + + if( (pSA->config & MV_CESA_OPERATION_MASK) != + (MV_CESA_MAC_ONLY << MV_CESA_OPERATION_OFFSET) ) + { + cryptoDataSize = MV_MIN( (copySize - cryptoOffset), + (pCmd->cryptoLength - (pReq->frags.cryptoSize + 1)) ); + + /* cryptoSize for each fragment must be the whole number of blocksSize */ + if( MV_IS_NOT_ALIGN(cryptoDataSize, pSA->cryptoBlockSize) ) + { + cryptoDataSize = MV_ALIGN_DOWN(cryptoDataSize, pSA->cryptoBlockSize); + copySize = cryptoOffset + cryptoDataSize; + } + } + if( (pSA->config & MV_CESA_OPERATION_MASK) != + (MV_CESA_CRYPTO_ONLY << MV_CESA_OPERATION_OFFSET) ) + { + macDataSize = MV_MIN( (copySize - macOffset), + (pCmd->macLength - (pReq->frags.macSize + 1))); + + /* macSize for each fragment (except last) must be the whole number of blocksSize */ + if( MV_IS_NOT_ALIGN(macDataSize, MV_CESA_AUTH_BLOCK_SIZE) ) + { + macDataSize = MV_ALIGN_DOWN(macDataSize, MV_CESA_AUTH_BLOCK_SIZE); + copySize = macOffset + macDataSize; + } + cryptoDataSize = copySize - cryptoOffset; + } + *pCopySize = copySize; + + if(pCryptoDataSize != NULL) + *pCryptoDataSize = cryptoDataSize; + + if(pMacDataSize != NULL) + *pMacDataSize = macDataSize; +} diff --git a/target/linux/generic-2.4/files/crypto/ocf/kirkwood/cesa/mvCesa.h b/target/linux/generic-2.4/files/crypto/ocf/kirkwood/cesa/mvCesa.h new file mode 100644 index 0000000000..115274ffee --- /dev/null +++ b/target/linux/generic-2.4/files/crypto/ocf/kirkwood/cesa/mvCesa.h @@ -0,0 +1,412 @@ +/******************************************************************************* +Copyright (C) Marvell International Ltd. and its affiliates + +This software file (the "File") is owned and distributed by Marvell +International Ltd. and/or its affiliates ("Marvell") under the following +alternative licensing terms. Once you have made an election to distribute the +File under one of the following license alternatives, please (i) delete this +introductory statement regarding license alternatives, (ii) delete the two +license alternatives that you have not elected to use and (iii) preserve the +Marvell copyright notice above. + +******************************************************************************** +Marvell Commercial License Option + +If you received this File from Marvell and you have entered into a commercial +license agreement (a "Commercial License") with Marvell, the File is licensed +to you under the terms of the applicable Commercial License. + +******************************************************************************** +Marvell GPL License Option + +If you received this File from Marvell, you may opt to use, redistribute and/or +modify this File in accordance with the terms and conditions of the General +Public License Version 2, June 1991 (the "GPL License"), a copy of which is +available along with the File in the license.txt file or by writing to the Free +Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or +on the worldwide web at http://www.gnu.org/licenses/gpl.txt. + +THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED +WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY +DISCLAIMED. The GPL License provides additional details about this warranty +disclaimer. +******************************************************************************** +Marvell BSD License Option + +If you received this File from Marvell, you may opt to use, redistribute and/or +modify this File under the following licensing terms. +Redistribution and use in source and binary forms, with or without modification, +are permitted provided that the following conditions are met: + + * Redistributions of source code must retain the above copyright notice, + this list of conditions and the following disclaimer. + + * Redistributions in binary form must reproduce the above copyright + notice, this list of conditions and the following disclaimer in the + documentation and/or other materials provided with the distribution. + + * Neither the name of Marvell nor the names of its contributors may be + used to endorse or promote products derived from this software without + specific prior written permission. + +THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND +ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED +WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE +DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR +ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES +(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; +LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON +ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS +SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + +*******************************************************************************/ + +/******************************************************************************* +* mvCesa.h - Header File for Cryptographic Engines and Security Accelerator +* +* DESCRIPTION: +* This header file contains macros typedefs and function declaration for +* the Marvell Cryptographic Engines and Security Accelerator. +* +*******************************************************************************/ + +#ifndef __mvCesa_h__ +#define __mvCesa_h__ + +#include "mvOs.h" +#include "mvCommon.h" +#include "mvDebug.h" + +#include "ctrlEnv/mvCtrlEnvSpec.h" + +#include "cesa/mvMD5.h" +#include "cesa/mvSHA1.h" + +#include "cesa/mvCesa.h" +#include "cesa/AES/mvAes.h" +#include "mvSysHwConfig.h" + +#ifdef MV_INCLUDE_IDMA +#include "idma/mvIdma.h" +#include "idma/mvIdmaRegs.h" +#else +/* Redefine MV_DMA_DESC structure */ +typedef struct _mvDmaDesc +{ + MV_U32 byteCnt; /* The total number of bytes to transfer */ + MV_U32 phySrcAdd; /* The physical source address */ + MV_U32 phyDestAdd; /* The physical destination address */ + MV_U32 phyNextDescPtr; /* If we are using chain mode DMA transfer, */ + /* then this pointer should point to the */ + /* physical address of the next descriptor, */ + /* otherwise it should be NULL. */ +}MV_DMA_DESC; +#endif /* MV_INCLUDE_IDMA */ + +#include "cesa/mvCesaRegs.h" + +#define MV_CESA_AUTH_BLOCK_SIZE 64 /* bytes */ + +#define MV_CESA_MD5_DIGEST_SIZE 16 /* bytes */ +#define MV_CESA_SHA1_DIGEST_SIZE 20 /* bytes */ + +#define MV_CESA_MAX_DIGEST_SIZE MV_CESA_SHA1_DIGEST_SIZE + +#define MV_CESA_DES_KEY_LENGTH 8 /* bytes = 64 bits */ +#define MV_CESA_3DES_KEY_LENGTH 24 /* bytes = 192 bits */ +#define MV_CESA_AES_128_KEY_LENGTH 16 /* bytes = 128 bits */ +#define MV_CESA_AES_192_KEY_LENGTH 24 /* bytes = 192 bits */ +#define MV_CESA_AES_256_KEY_LENGTH 32 /* bytes = 256 bits */ + +#define MV_CESA_MAX_CRYPTO_KEY_LENGTH MV_CESA_AES_256_KEY_LENGTH + +#define MV_CESA_DES_BLOCK_SIZE 8 /* bytes = 64 bits */ +#define MV_CESA_3DES_BLOCK_SIZE 8 /* bytes = 64 bits */ + +#define MV_CESA_AES_BLOCK_SIZE 16 /* bytes = 128 bits */ + +#define MV_CESA_MAX_IV_LENGTH MV_CESA_AES_BLOCK_SIZE + +#define MV_CESA_MAX_MAC_KEY_LENGTH 64 /* bytes */ + +typedef struct +{ + MV_U8 cryptoKey[MV_CESA_MAX_CRYPTO_KEY_LENGTH]; + MV_U8 macKey[MV_CESA_MAX_MAC_KEY_LENGTH]; + MV_CESA_OPERATION operation; + MV_CESA_DIRECTION direction; + MV_CESA_CRYPTO_ALG cryptoAlgorithm; + MV_CESA_CRYPTO_MODE cryptoMode; + MV_U8 cryptoKeyLength; + MV_CESA_MAC_MODE macMode; + MV_U8 macKeyLength; + MV_U8 digestSize; + +} MV_CESA_OPEN_SESSION; + +typedef struct +{ + MV_BUF_INFO *pFrags; + MV_U16 numFrags; + MV_U16 mbufSize; + +} MV_CESA_MBUF; + +typedef struct +{ + void* pReqPrv; /* instead of reqId */ + MV_U32 retCode; + MV_16 sessionId; + +} MV_CESA_RESULT; + +typedef void (*MV_CESA_CALLBACK) (MV_CESA_RESULT* pResult); + + +typedef struct +{ + void* pReqPrv; /* instead of reqId */ + MV_CESA_MBUF* pSrc; + MV_CESA_MBUF* pDst; + MV_CESA_CALLBACK* pFuncCB; + MV_16 sessionId; + MV_U16 ivFromUser; + MV_U16 ivOffset; + MV_U16 cryptoOffset; + MV_U16 cryptoLength; + MV_U16 digestOffset; + MV_U16 macOffset; + MV_U16 macLength; + MV_BOOL skipFlush; +} MV_CESA_COMMAND; + + + +MV_STATUS mvCesaHalInit (int numOfSession, int queueDepth, char* pSramBase, MV_U32 cryptEngBase, void *osHandle); +MV_STATUS mvCesaFinish (void); +MV_STATUS mvCesaSessionOpen(MV_CESA_OPEN_SESSION *pSession, short* pSid); +MV_STATUS mvCesaSessionClose(short sid); +MV_STATUS mvCesaCryptoIvSet(MV_U8* pIV, int ivSize); + +MV_STATUS mvCesaAction (MV_CESA_COMMAND* pCmd); + +MV_U32 mvCesaInProcessGet(void); +MV_STATUS mvCesaReadyDispatch(void); +MV_STATUS mvCesaReadyGet(MV_CESA_RESULT* pResult); +MV_BOOL mvCesaIsReady(void); + +int mvCesaMbufOffset(MV_CESA_MBUF* pMbuf, int offset, int* pBufOffset); +MV_STATUS mvCesaCopyFromMbuf(MV_U8* pDst, MV_CESA_MBUF* pSrcMbuf, + int offset, int size); +MV_STATUS mvCesaCopyToMbuf(MV_U8* pSrc, MV_CESA_MBUF* pDstMbuf, + int offset, int size); +MV_STATUS mvCesaMbufCopy(MV_CESA_MBUF* pMbufDst, int dstMbufOffset, + MV_CESA_MBUF* pMbufSrc, int srcMbufOffset, int size); + +/********** Debug functions ********/ + +void mvCesaDebugMbuf(const char* str, MV_CESA_MBUF *pMbuf, int offset, int size); +void mvCesaDebugSA(short sid, int mode); +void mvCesaDebugStats(void); +void mvCesaDebugStatsClear(void); +void mvCesaDebugRegs(void); +void mvCesaDebugStatus(void); +void mvCesaDebugQueue(int mode); +void mvCesaDebugSram(int mode); +void mvCesaDebugSAD(int mode); + + +/******** CESA Private definitions ********/ +#if (MV_CESA_VERSION >= 2) +#if (MV_CACHE_COHERENCY == MV_CACHE_COHER_SW) +#define MV_CESA_TDMA_CTRL_VALUE MV_CESA_TDMA_DST_BURST_MASK(MV_CESA_TDMA_BURST_128B) \ + | MV_CESA_TDMA_SRC_BURST_MASK(MV_CESA_TDMA_BURST_128B) \ + | MV_CESA_TDMA_OUTSTAND_READ_EN_MASK \ + | MV_CESA_TDMA_NO_BYTE_SWAP_MASK \ + | MV_CESA_TDMA_ENABLE_MASK +#else +#define MV_CESA_TDMA_CTRL_VALUE MV_CESA_TDMA_DST_BURST_MASK(MV_CESA_TDMA_BURST_32B) \ + | MV_CESA_TDMA_SRC_BURST_MASK(MV_CESA_TDMA_BURST_128B) \ + /*| MV_CESA_TDMA_OUTSTAND_READ_EN_MASK */\ + | MV_CESA_TDMA_ENABLE_MASK + +#endif +#else +#define MV_CESA_IDMA_CTRL_LOW_VALUE ICCLR_DST_BURST_LIM_128BYTE \ + | ICCLR_SRC_BURST_LIM_128BYTE \ + | ICCLR_INT_MODE_MASK \ + | ICCLR_BLOCK_MODE \ + | ICCLR_CHAN_ENABLE \ + | ICCLR_DESC_MODE_16M +#endif /* MV_CESA_VERSION >= 2 */ + +#define MV_CESA_MAX_PKT_SIZE (64 * 1024) +#define MV_CESA_MAX_MBUF_FRAGS 20 + +#define MV_CESA_MAX_REQ_FRAGS ( (MV_CESA_MAX_PKT_SIZE / MV_CESA_MAX_BUF_SIZE) + 1) + +#define MV_CESA_MAX_DMA_DESC (MV_CESA_MAX_MBUF_FRAGS*2 + 5) + +#define MAX_CESA_CHAIN_LENGTH 20 + +typedef enum +{ + MV_CESA_IDLE = 0, + MV_CESA_PENDING, + MV_CESA_PROCESS, + MV_CESA_READY, +#if (MV_CESA_VERSION >= 3) + MV_CESA_CHAIN, +#endif +} MV_CESA_STATE; + + +/* Session database */ + +/* Map of Key materials of the session in SRAM. + * Each field must be 8 byte aligned + * Total size: 32 + 24 + 24 = 80 bytes + */ +typedef struct +{ + MV_U8 cryptoKey[MV_CESA_MAX_CRYPTO_KEY_LENGTH]; + MV_U8 macInnerIV[MV_CESA_MAX_DIGEST_SIZE]; + MV_U8 reservedInner[4]; + MV_U8 macOuterIV[MV_CESA_MAX_DIGEST_SIZE]; + MV_U8 reservedOuter[4]; + +} MV_CESA_SRAM_SA; + +typedef struct +{ + MV_CESA_SRAM_SA* pSramSA; + MV_U32 config; + MV_U8 cryptoKeyLength; + MV_U8 cryptoIvSize; + MV_U8 cryptoBlockSize; + MV_U8 digestSize; + MV_U8 macKeyLength; + MV_U8 valid; + MV_U8 ctrMode; + MV_U32 count; + +} MV_CESA_SA; + +/* DMA list management */ +typedef struct +{ + MV_DMA_DESC* pDmaFirst; + MV_DMA_DESC* pDmaLast; + +} MV_CESA_DMA; + + +typedef struct +{ + MV_U8 numFrag; + MV_U8 nextFrag; + int bufOffset; + int cryptoSize; + int macSize; + int newDigestOffset; + MV_U8 orgDigest[MV_CESA_MAX_DIGEST_SIZE]; + +} MV_CESA_FRAGS; + +/* Request queue */ +typedef struct +{ + MV_U8 state; + MV_U8 fragMode; + MV_U8 fixOffset; + MV_CESA_COMMAND* pCmd; + MV_CESA_COMMAND* pOrgCmd; + MV_BUF_INFO dmaDescBuf; + MV_CESA_DMA dma[MV_CESA_MAX_REQ_FRAGS]; + MV_BUF_INFO cesaDescBuf; + MV_CESA_DESC* pCesaDesc; + MV_CESA_FRAGS frags; + + +} MV_CESA_REQ; + + +/* SRAM map */ +/* Total SRAM size calculation */ +/* SRAM size = + * MV_CESA_MAX_BUF_SIZE + + * sizeof(MV_CESA_DESC) + + * MV_CESA_MAX_IV_LENGTH + + * MV_CESA_MAX_IV_LENGTH + + * MV_CESA_MAX_DIGEST_SIZE + + * sizeof(MV_CESA_SRAM_SA) + * = 1600 + 32 + 16 + 16 + 24 + 80 + 280 (reserved) = 2048 bytes + * = 3200 + 32 + 16 + 16 + 24 + 80 + 728 (reserved) = 4096 bytes + */ +typedef struct +{ + MV_U8 buf[MV_CESA_MAX_BUF_SIZE]; + MV_CESA_DESC desc; + MV_U8 cryptoIV[MV_CESA_MAX_IV_LENGTH]; + MV_U8 tempCryptoIV[MV_CESA_MAX_IV_LENGTH]; + MV_U8 tempDigest[MV_CESA_MAX_DIGEST_SIZE+4]; + MV_CESA_SRAM_SA sramSA; + +} MV_CESA_SRAM_MAP; + + +typedef struct +{ + MV_U32 openedCount; + MV_U32 closedCount; + MV_U32 fragCount; + MV_U32 reqCount; + MV_U32 maxReqCount; + MV_U32 procCount; + MV_U32 readyCount; + MV_U32 notReadyCount; + MV_U32 startCount; +#if (MV_CESA_VERSION >= 3) + MV_U32 maxChainUsage; +#endif + +} MV_CESA_STATS; + + +/* External variables */ + +extern MV_CESA_STATS cesaStats; +extern MV_CESA_FRAGS cesaFrags; + +extern MV_BUF_INFO cesaSramSaBuf; + +extern MV_CESA_SA* pCesaSAD; +extern MV_U16 cesaMaxSA; + +extern MV_CESA_REQ* pCesaReqFirst; +extern MV_CESA_REQ* pCesaReqLast; +extern MV_CESA_REQ* pCesaReqEmpty; +extern MV_CESA_REQ* pCesaReqProcess; +extern int cesaQueueDepth; +extern int cesaReqResources; +#if (MV_CESA_VERSION>= 3) +extern MV_U32 cesaChainLength; +#endif + +extern MV_CESA_SRAM_MAP* cesaSramVirtPtr; +extern MV_U32 cesaSramPhysAddr; + +static INLINE MV_ULONG mvCesaVirtToPhys(MV_BUF_INFO* pBufInfo, void* pVirt) +{ + return (pBufInfo->bufPhysAddr + ((MV_U8*)pVirt - pBufInfo->bufVirtPtr)); +} + +/* Additional DEBUG functions */ +void mvCesaDebugSramSA(MV_CESA_SRAM_SA* pSramSA, int mode); +void mvCesaDebugCmd(MV_CESA_COMMAND* pCmd, int mode); +void mvCesaDebugDescriptor(MV_CESA_DESC* pDesc); + + + +#endif /* __mvCesa_h__ */ diff --git a/target/linux/generic-2.4/files/crypto/ocf/kirkwood/cesa/mvCesaDebug.c b/target/linux/generic-2.4/files/crypto/ocf/kirkwood/cesa/mvCesaDebug.c new file mode 100644 index 0000000000..31b78a8053 --- /dev/null +++ b/target/linux/generic-2.4/files/crypto/ocf/kirkwood/cesa/mvCesaDebug.c @@ -0,0 +1,484 @@ +/******************************************************************************* +Copyright (C) Marvell International Ltd. and its affiliates + +This software file (the "File") is owned and distributed by Marvell +International Ltd. and/or its affiliates ("Marvell") under the following +alternative licensing terms. Once you have made an election to distribute the +File under one of the following license alternatives, please (i) delete this +introductory statement regarding license alternatives, (ii) delete the two +license alternatives that you have not elected to use and (iii) preserve the +Marvell copyright notice above. + +******************************************************************************** +Marvell Commercial License Option + +If you received this File from Marvell and you have entered into a commercial +license agreement (a "Commercial License") with Marvell, the File is licensed +to you under the terms of the applicable Commercial License. + +******************************************************************************** +Marvell GPL License Option + +If you received this File from Marvell, you may opt to use, redistribute and/or +modify this File in accordance with the terms and conditions of the General +Public License Version 2, June 1991 (the "GPL License"), a copy of which is +available along with the File in the license.txt file or by writing to the Free +Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or +on the worldwide web at http://www.gnu.org/licenses/gpl.txt. + +THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED +WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY +DISCLAIMED. The GPL License provides additional details about this warranty +disclaimer. +******************************************************************************** +Marvell BSD License Option + +If you received this File from Marvell, you may opt to use, redistribute and/or +modify this File under the following licensing terms. +Redistribution and use in source and binary forms, with or without modification, +are permitted provided that the following conditions are met: + + * Redistributions of source code must retain the above copyright notice, + this list of conditions and the following disclaimer. + + * Redistributions in binary form must reproduce the above copyright + notice, this list of conditions and the following disclaimer in the + documentation and/or other materials provided with the distribution. + + * Neither the name of Marvell nor the names of its contributors may be + used to endorse or promote products derived from this software without + specific prior written permission. + +THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND +ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED +WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE +DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR +ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES +(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; +LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON +ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS +SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + +*******************************************************************************/ + +#include "mvOs.h" +#include "mvDebug.h" + +#include "cesa/mvMD5.h" +#include "cesa/mvSHA1.h" + +#include "cesa/mvCesa.h" +#include "cesa/mvCesaRegs.h" +#include "cesa/AES/mvAes.h" + +static const char* mvCesaDebugStateStr(MV_CESA_STATE state) +{ + switch(state) + { + case MV_CESA_IDLE: + return "Idle"; + + case MV_CESA_PENDING: + return "Pend"; + + case MV_CESA_PROCESS: + return "Proc"; + + case MV_CESA_READY: + return "Ready"; + + default: + break; + } + return "Unknown"; +} + +static const char* mvCesaDebugOperStr(MV_CESA_OPERATION oper) +{ + switch(oper) + { + case MV_CESA_MAC_ONLY: + return "MacOnly"; + + case MV_CESA_CRYPTO_ONLY: + return "CryptoOnly"; + + case MV_CESA_MAC_THEN_CRYPTO: + return "MacCrypto"; + + case MV_CESA_CRYPTO_THEN_MAC: + return "CryptoMac"; + + default: + break; + } + return "Null"; +} + +static const char* mvCesaDebugCryptoAlgStr(MV_CESA_CRYPTO_ALG cryptoAlg) +{ + switch(cryptoAlg) + { + case MV_CESA_CRYPTO_DES: + return "DES"; + + case MV_CESA_CRYPTO_3DES: + return "3DES"; + + case MV_CESA_CRYPTO_AES: + return "AES"; + + default: + break; + } + return "Null"; +} + +static const char* mvCesaDebugMacModeStr(MV_CESA_MAC_MODE macMode) +{ + switch(macMode) + { + case MV_CESA_MAC_MD5: + return "MD5"; + + case MV_CESA_MAC_SHA1: + return "SHA1"; + + case MV_CESA_MAC_HMAC_MD5: + return "HMAC-MD5"; + + case MV_CESA_MAC_HMAC_SHA1: + return "HMAC_SHA1"; + + default: + break; + } + return "Null"; +} + +void mvCesaDebugCmd(MV_CESA_COMMAND* pCmd, int mode) +{ + mvOsPrintf("pCmd=%p, pReqPrv=%p, pSrc=%p, pDst=%p, pCB=%p, sid=%d\n", + pCmd, pCmd->pReqPrv, pCmd->pSrc, pCmd->pDst, + pCmd->pFuncCB, pCmd->sessionId); + mvOsPrintf("isUser=%d, ivOffs=%d, crOffs=%d, crLen=%d, digest=%d, macOffs=%d, macLen=%d\n", + pCmd->ivFromUser, pCmd->ivOffset, pCmd->cryptoOffset, pCmd->cryptoLength, + pCmd->digestOffset, pCmd->macOffset, pCmd->macLength); +} + +/* no need to use in tool */ +void mvCesaDebugMbuf(const char* str, MV_CESA_MBUF *pMbuf, int offset, int size) +{ + int frag, len, fragOffset; + + if(str != NULL) + mvOsPrintf("%s: pMbuf=%p, numFrags=%d, mbufSize=%d\n", + str, pMbuf, pMbuf->numFrags, pMbuf->mbufSize); + + frag = mvCesaMbufOffset(pMbuf, offset, &fragOffset); + if(frag == MV_INVALID) + { + mvOsPrintf("CESA Mbuf Error: offset (%d) out of range\n", offset); + return; + } + + for(; fragnumFrags; frag++) + { + mvOsPrintf("#%2d. bufVirt=%p, bufSize=%d\n", + frag, pMbuf->pFrags[frag].bufVirtPtr, + pMbuf->pFrags[frag].bufSize); + if(size > 0) + { + len = MV_MIN(pMbuf->pFrags[frag].bufSize, size); + mvDebugMemDump(pMbuf->pFrags[frag].bufVirtPtr+fragOffset, len, 1); + size -= len; + fragOffset = 0; + } + } +} + +void mvCesaDebugRegs(void) +{ + mvOsPrintf("\t CESA Registers:\n"); + + mvOsPrintf("MV_CESA_CMD_REG : 0x%X = 0x%08x\n", + MV_CESA_CMD_REG, + MV_REG_READ( MV_CESA_CMD_REG ) ); + + mvOsPrintf("MV_CESA_CHAN_DESC_OFFSET_REG : 0x%X = 0x%08x\n", + MV_CESA_CHAN_DESC_OFFSET_REG, + MV_REG_READ(MV_CESA_CHAN_DESC_OFFSET_REG) ); + + mvOsPrintf("MV_CESA_CFG_REG : 0x%X = 0x%08x\n", + MV_CESA_CFG_REG, + MV_REG_READ( MV_CESA_CFG_REG ) ); + + mvOsPrintf("MV_CESA_STATUS_REG : 0x%X = 0x%08x\n", + MV_CESA_STATUS_REG, + MV_REG_READ( MV_CESA_STATUS_REG ) ); + + mvOsPrintf("MV_CESA_ISR_CAUSE_REG : 0x%X = 0x%08x\n", + MV_CESA_ISR_CAUSE_REG, + MV_REG_READ( MV_CESA_ISR_CAUSE_REG ) ); + + mvOsPrintf("MV_CESA_ISR_MASK_REG : 0x%X = 0x%08x\n", + MV_CESA_ISR_MASK_REG, + MV_REG_READ( MV_CESA_ISR_MASK_REG ) ); +#if (MV_CESA_VERSION >= 2) + mvOsPrintf("MV_CESA_TDMA_CTRL_REG : 0x%X = 0x%08x\n", + MV_CESA_TDMA_CTRL_REG, + MV_REG_READ( MV_CESA_TDMA_CTRL_REG ) ); + + mvOsPrintf("MV_CESA_TDMA_BYTE_COUNT_REG : 0x%X = 0x%08x\n", + MV_CESA_TDMA_BYTE_COUNT_REG, + MV_REG_READ( MV_CESA_TDMA_BYTE_COUNT_REG ) ); + + mvOsPrintf("MV_CESA_TDMA_SRC_ADDR_REG : 0x%X = 0x%08x\n", + MV_CESA_TDMA_SRC_ADDR_REG, + MV_REG_READ( MV_CESA_TDMA_SRC_ADDR_REG ) ); + + mvOsPrintf("MV_CESA_TDMA_DST_ADDR_REG : 0x%X = 0x%08x\n", + MV_CESA_TDMA_DST_ADDR_REG, + MV_REG_READ( MV_CESA_TDMA_DST_ADDR_REG ) ); + + mvOsPrintf("MV_CESA_TDMA_NEXT_DESC_PTR_REG : 0x%X = 0x%08x\n", + MV_CESA_TDMA_NEXT_DESC_PTR_REG, + MV_REG_READ( MV_CESA_TDMA_NEXT_DESC_PTR_REG ) ); + + mvOsPrintf("MV_CESA_TDMA_CURR_DESC_PTR_REG : 0x%X = 0x%08x\n", + MV_CESA_TDMA_CURR_DESC_PTR_REG, + MV_REG_READ( MV_CESA_TDMA_CURR_DESC_PTR_REG ) ); + + mvOsPrintf("MV_CESA_TDMA_ERROR_CAUSE_REG : 0x%X = 0x%08x\n", + MV_CESA_TDMA_ERROR_CAUSE_REG, + MV_REG_READ( MV_CESA_TDMA_ERROR_CAUSE_REG ) ); + + mvOsPrintf("MV_CESA_TDMA_ERROR_MASK_REG : 0x%X = 0x%08x\n", + MV_CESA_TDMA_ERROR_MASK_REG, + MV_REG_READ( MV_CESA_TDMA_ERROR_CAUSE_REG ) ); + +#endif +} + +void mvCesaDebugStatus(void) +{ + mvOsPrintf("\n\t CESA Status\n\n"); + + mvOsPrintf("pReqQ=%p, qDepth=%d, reqSize=%ld bytes, qRes=%d, ", + pCesaReqFirst, cesaQueueDepth, sizeof(MV_CESA_REQ), + cesaReqResources); +#if (MV_CESA_VERSION >= 3) + mvOsPrintf("chainLength=%u\n",cesaChainLength); +#else + mvOsPrintf("\n"); +#endif + + mvOsPrintf("pSAD=%p, maxSA=%d, sizeSA=%ld bytes\n", + pCesaSAD, cesaMaxSA, sizeof(MV_CESA_SA)); + + mvOsPrintf("\n"); + + mvCesaDebugRegs(); + mvCesaDebugStats(); + mvCesaDebugStatsClear(); +} + +void mvCesaDebugDescriptor(MV_CESA_DESC* pDesc) +{ + mvOsPrintf("config=0x%08x, crSrcOffs=0x%04x, crDstOffs=0x%04x\n", + pDesc->config, pDesc->cryptoSrcOffset, pDesc->cryptoDstOffset); + + mvOsPrintf("crLen=0x%04x, crKeyOffs=0x%04x, ivOffs=0x%04x, ivBufOffs=0x%04x\n", + pDesc->cryptoDataLen, pDesc->cryptoKeyOffset, + pDesc->cryptoIvOffset, pDesc->cryptoIvBufOffset); + + mvOsPrintf("macSrc=0x%04x, digest=0x%04x, macLen=0x%04x, inIv=0x%04x, outIv=0x%04x\n", + pDesc->macSrcOffset, pDesc->macDigestOffset, pDesc->macDataLen, + pDesc->macInnerIvOffset, pDesc->macOuterIvOffset); +} + +void mvCesaDebugQueue(int mode) +{ + mvOsPrintf("\n\t CESA Request Queue:\n\n"); + + mvOsPrintf("pFirstReq=%p, pLastReq=%p, qDepth=%d, reqSize=%ld bytes\n", + pCesaReqFirst, pCesaReqLast, cesaQueueDepth, sizeof(MV_CESA_REQ)); + + mvOsPrintf("pEmpty=%p, pProcess=%p, qResources=%d\n", + pCesaReqEmpty, pCesaReqProcess, + cesaReqResources); + + if(mode != 0) + { + int count = 0; + MV_CESA_REQ* pReq = pCesaReqFirst; + + for(count=0; countstate), + pReq->fragMode, pReq->pCmd, pReq->dma[0].pDmaFirst, &pReq->pCesaDesc[0]); + if(pReq->fragMode != MV_CESA_FRAG_NONE) + { + int frag; + + mvOsPrintf("pFrags=%p, num=%d, next=%d, bufOffset=%d, cryptoSize=%d, macSize=%d\n", + &pReq->frags, pReq->frags.numFrag, pReq->frags.nextFrag, + pReq->frags.bufOffset, pReq->frags.cryptoSize, pReq->frags.macSize); + for(frag=0; fragfrags.numFrag; frag++) + { + mvOsPrintf("#%d: pDmaFirst=%p, pDesc=%p\n", frag, + pReq->dma[frag].pDmaFirst, &pReq->pCesaDesc[frag]); + } + } + if(mode > 1) + { + /* Print out Command */ + mvCesaDebugCmd(pReq->pCmd, mode); + + /* Print out Descriptor */ + mvCesaDebugDescriptor(&pReq->pCesaDesc[0]); + } + pReq++; + } + } +} + + +void mvCesaDebugSramSA(MV_CESA_SRAM_SA* pSramSA, int mode) +{ + if(pSramSA == NULL) + { + mvOsPrintf("cesaSramSA: Unexpected pSramSA=%p\n", pSramSA); + return; + } + mvOsPrintf("pSramSA=%p, sizeSramSA=%ld bytes\n", + pSramSA, sizeof(MV_CESA_SRAM_SA)); + + if(mode != 0) + { + mvOsPrintf("cryptoKey=%p, maxCryptoKey=%d bytes\n", + pSramSA->cryptoKey, MV_CESA_MAX_CRYPTO_KEY_LENGTH); + mvDebugMemDump(pSramSA->cryptoKey, MV_CESA_MAX_CRYPTO_KEY_LENGTH, 1); + + mvOsPrintf("macInnerIV=%p, maxInnerIV=%d bytes\n", + pSramSA->macInnerIV, MV_CESA_MAX_DIGEST_SIZE); + mvDebugMemDump(pSramSA->macInnerIV, MV_CESA_MAX_DIGEST_SIZE, 1); + + mvOsPrintf("macOuterIV=%p, maxOuterIV=%d bytes\n", + pSramSA->macOuterIV, MV_CESA_MAX_DIGEST_SIZE); + mvDebugMemDump(pSramSA->macOuterIV, MV_CESA_MAX_DIGEST_SIZE, 1); + } +} + +void mvCesaDebugSA(short sid, int mode) +{ + MV_CESA_OPERATION oper; + MV_CESA_DIRECTION dir; + MV_CESA_CRYPTO_ALG cryptoAlg; + MV_CESA_CRYPTO_MODE cryptoMode; + MV_CESA_MAC_MODE macMode; + MV_CESA_SA* pSA = &pCesaSAD[sid]; + + if( (pSA->valid) || ((pSA->count != 0) && (mode > 0)) || (mode >= 2) ) + { + mvOsPrintf("\n\nCESA SA Entry #%d (%p) - %s (count=%d)\n", + sid, pSA, + pSA->valid ? "Valid" : "Invalid", pSA->count); + + oper = (pSA->config & MV_CESA_OPERATION_MASK) >> MV_CESA_OPERATION_OFFSET; + dir = (pSA->config & MV_CESA_DIRECTION_MASK) >> MV_CESA_DIRECTION_BIT; + mvOsPrintf("%s - %s ", mvCesaDebugOperStr(oper), + (dir == MV_CESA_DIR_ENCODE) ? "Encode" : "Decode"); + if(oper != MV_CESA_MAC_ONLY) + { + cryptoAlg = (pSA->config & MV_CESA_CRYPTO_ALG_MASK) >> MV_CESA_CRYPTO_ALG_OFFSET; + cryptoMode = (pSA->config & MV_CESA_CRYPTO_MODE_MASK) >> MV_CESA_CRYPTO_MODE_BIT; + mvOsPrintf("- %s - %s ", mvCesaDebugCryptoAlgStr(cryptoAlg), + (cryptoMode == MV_CESA_CRYPTO_ECB) ? "ECB" : "CBC"); + } + if(oper != MV_CESA_CRYPTO_ONLY) + { + macMode = (pSA->config & MV_CESA_MAC_MODE_MASK) >> MV_CESA_MAC_MODE_OFFSET; + mvOsPrintf("- %s ", mvCesaDebugMacModeStr(macMode)); + } + mvOsPrintf("\n"); + + if(mode > 0) + { + mvOsPrintf("config=0x%08x, cryptoKeySize=%d, digestSize=%d\n", + pCesaSAD[sid].config, pCesaSAD[sid].cryptoKeyLength, + pCesaSAD[sid].digestSize); + + mvCesaDebugSramSA(pCesaSAD[sid].pSramSA, mode); + } + } +} + + +/**/ +void mvCesaDebugSram(int mode) +{ + mvOsPrintf("\n\t SRAM contents: size=%ld, pVirt=%p\n\n", + sizeof(MV_CESA_SRAM_MAP), cesaSramVirtPtr); + + mvOsPrintf("\n\t Sram buffer: size=%d, pVirt=%p\n", + MV_CESA_MAX_BUF_SIZE, cesaSramVirtPtr->buf); + if(mode != 0) + mvDebugMemDump(cesaSramVirtPtr->buf, 64, 1); + + mvOsPrintf("\n"); + mvOsPrintf("\n\t Sram descriptor: size=%ld, pVirt=%p\n", + sizeof(MV_CESA_DESC), &cesaSramVirtPtr->desc); + if(mode != 0) + { + mvOsPrintf("\n"); + mvCesaDebugDescriptor(&cesaSramVirtPtr->desc); + } + mvOsPrintf("\n\t Sram IV: size=%d, pVirt=%p\n", + MV_CESA_MAX_IV_LENGTH, &cesaSramVirtPtr->cryptoIV); + if(mode != 0) + { + mvOsPrintf("\n"); + mvDebugMemDump(cesaSramVirtPtr->cryptoIV, MV_CESA_MAX_IV_LENGTH, 1); + } + mvOsPrintf("\n"); + mvCesaDebugSramSA(&cesaSramVirtPtr->sramSA, 0); +} + +void mvCesaDebugSAD(int mode) +{ + int sid; + + mvOsPrintf("\n\t Cesa SAD status: pSAD=%p, maxSA=%d\n", + pCesaSAD, cesaMaxSA); + + for(sid=0; sid= 3) + mvOsPrintf("maxChainUsage=%u\n",cesaStats.maxChainUsage); +#endif + mvOsPrintf("\n"); + mvOsPrintf("proc=%u, ready=%u, notReady=%u\n", + cesaStats.procCount, cesaStats.readyCount, cesaStats.notReadyCount); +} + +void mvCesaDebugStatsClear(void) +{ + memset(&cesaStats, 0, sizeof(cesaStats)); +} diff --git a/target/linux/generic-2.4/files/crypto/ocf/kirkwood/cesa/mvCesaRegs.h b/target/linux/generic-2.4/files/crypto/ocf/kirkwood/cesa/mvCesaRegs.h new file mode 100644 index 0000000000..b12e44b14b --- /dev/null +++ b/target/linux/generic-2.4/files/crypto/ocf/kirkwood/cesa/mvCesaRegs.h @@ -0,0 +1,357 @@ +/******************************************************************************* +Copyright (C) Marvell International Ltd. and its affiliates + +This software file (the "File") is owned and distributed by Marvell +International Ltd. and/or its affiliates ("Marvell") under the following +alternative licensing terms. Once you have made an election to distribute the +File under one of the following license alternatives, please (i) delete this +introductory statement regarding license alternatives, (ii) delete the two +license alternatives that you have not elected to use and (iii) preserve the +Marvell copyright notice above. + +******************************************************************************** +Marvell Commercial License Option + +If you received this File from Marvell and you have entered into a commercial +license agreement (a "Commercial License") with Marvell, the File is licensed +to you under the terms of the applicable Commercial License. + +******************************************************************************** +Marvell GPL License Option + +If you received this File from Marvell, you may opt to use, redistribute and/or +modify this File in accordance with the terms and conditions of the General +Public License Version 2, June 1991 (the "GPL License"), a copy of which is +available along with the File in the license.txt file or by writing to the Free +Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or +on the worldwide web at http://www.gnu.org/licenses/gpl.txt. + +THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED +WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY +DISCLAIMED. The GPL License provides additional details about this warranty +disclaimer. +******************************************************************************** +Marvell BSD License Option + +If you received this File from Marvell, you may opt to use, redistribute and/or +modify this File under the following licensing terms. +Redistribution and use in source and binary forms, with or without modification, +are permitted provided that the following conditions are met: + + * Redistributions of source code must retain the above copyright notice, + this list of conditions and the following disclaimer. + + * Redistributions in binary form must reproduce the above copyright + notice, this list of conditions and the following disclaimer in the + documentation and/or other materials provided with the distribution. + + * Neither the name of Marvell nor the names of its contributors may be + used to endorse or promote products derived from this software without + specific prior written permission. + +THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND +ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED +WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE +DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR +ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES +(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; +LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON +ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS +SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + +*******************************************************************************/ + +#ifndef __mvCesaRegs_h__ +#define __mvCesaRegs_h__ + +#include "mvTypes.h" + +typedef struct +{ + /* word 0 */ + MV_U32 config; + /* word 1 */ + MV_U16 cryptoSrcOffset; + MV_U16 cryptoDstOffset; + /* word 2 */ + MV_U16 cryptoDataLen; + MV_U16 reserved1; + /* word 3 */ + MV_U16 cryptoKeyOffset; + MV_U16 reserved2; + /* word 4 */ + MV_U16 cryptoIvOffset; + MV_U16 cryptoIvBufOffset; + /* word 5 */ + MV_U16 macSrcOffset; + MV_U16 macTotalLen; + /* word 6 */ + MV_U16 macDigestOffset; + MV_U16 macDataLen; + /* word 7 */ + MV_U16 macInnerIvOffset; + MV_U16 macOuterIvOffset; + +} MV_CESA_DESC; + +/* operation */ +typedef enum +{ + MV_CESA_MAC_ONLY = 0, + MV_CESA_CRYPTO_ONLY = 1, + MV_CESA_MAC_THEN_CRYPTO = 2, + MV_CESA_CRYPTO_THEN_MAC = 3, + + MV_CESA_MAX_OPERATION + +} MV_CESA_OPERATION; + +#define MV_CESA_OPERATION_OFFSET 0 +#define MV_CESA_OPERATION_MASK (0x3 << MV_CESA_OPERATION_OFFSET) + +/* mac algorithm */ +typedef enum +{ + MV_CESA_MAC_NULL = 0, + MV_CESA_MAC_MD5 = 4, + MV_CESA_MAC_SHA1 = 5, + MV_CESA_MAC_HMAC_MD5 = 6, + MV_CESA_MAC_HMAC_SHA1 = 7, + +} MV_CESA_MAC_MODE; + +#define MV_CESA_MAC_MODE_OFFSET 4 +#define MV_CESA_MAC_MODE_MASK (0x7 << MV_CESA_MAC_MODE_OFFSET) + +typedef enum +{ + MV_CESA_MAC_DIGEST_FULL = 0, + MV_CESA_MAC_DIGEST_96B = 1, + +} MV_CESA_MAC_DIGEST_SIZE; + +#define MV_CESA_MAC_DIGEST_SIZE_BIT 7 +#define MV_CESA_MAC_DIGEST_SIZE_MASK (1 << MV_CESA_MAC_DIGEST_SIZE_BIT) + + +typedef enum +{ + MV_CESA_CRYPTO_NULL = 0, + MV_CESA_CRYPTO_DES = 1, + MV_CESA_CRYPTO_3DES = 2, + MV_CESA_CRYPTO_AES = 3, + +} MV_CESA_CRYPTO_ALG; + +#define MV_CESA_CRYPTO_ALG_OFFSET 8 +#define MV_CESA_CRYPTO_ALG_MASK (0x3 << MV_CESA_CRYPTO_ALG_OFFSET) + + +/* direction */ +typedef enum +{ + MV_CESA_DIR_ENCODE = 0, + MV_CESA_DIR_DECODE = 1, + +} MV_CESA_DIRECTION; + +#define MV_CESA_DIRECTION_BIT 12 +#define MV_CESA_DIRECTION_MASK (1 << MV_CESA_DIRECTION_BIT) + +/* crypto IV mode */ +typedef enum +{ + MV_CESA_CRYPTO_ECB = 0, + MV_CESA_CRYPTO_CBC = 1, + + /* NO HW Support */ + MV_CESA_CRYPTO_CTR = 10, + +} MV_CESA_CRYPTO_MODE; + +#define MV_CESA_CRYPTO_MODE_BIT 16 +#define MV_CESA_CRYPTO_MODE_MASK (1 << MV_CESA_CRYPTO_MODE_BIT) + +/* 3DES mode */ +typedef enum +{ + MV_CESA_CRYPTO_3DES_EEE = 0, + MV_CESA_CRYPTO_3DES_EDE = 1, + +} MV_CESA_CRYPTO_3DES_MODE; + +#define MV_CESA_CRYPTO_3DES_MODE_BIT 20 +#define MV_CESA_CRYPTO_3DES_MODE_MASK (1 << MV_CESA_CRYPTO_3DES_MODE_BIT) + + +/* AES Key Length */ +typedef enum +{ + MV_CESA_CRYPTO_AES_KEY_128 = 0, + MV_CESA_CRYPTO_AES_KEY_192 = 1, + MV_CESA_CRYPTO_AES_KEY_256 = 2, + +} MV_CESA_CRYPTO_AES_KEY_LEN; + +#define MV_CESA_CRYPTO_AES_KEY_LEN_OFFSET 24 +#define MV_CESA_CRYPTO_AES_KEY_LEN_MASK (0x3 << MV_CESA_CRYPTO_AES_KEY_LEN_OFFSET) + +/* Fragmentation mode */ +typedef enum +{ + MV_CESA_FRAG_NONE = 0, + MV_CESA_FRAG_FIRST = 1, + MV_CESA_FRAG_LAST = 2, + MV_CESA_FRAG_MIDDLE = 3, + +} MV_CESA_FRAG_MODE; + +#define MV_CESA_FRAG_MODE_OFFSET 30 +#define MV_CESA_FRAG_MODE_MASK (0x3 << MV_CESA_FRAG_MODE_OFFSET) +/*---------------------------------------------------------------------------*/ + +/********** Security Accelerator Command Register **************/ +#define MV_CESA_CMD_REG (MV_CESA_REG_BASE + 0xE00) + +#define MV_CESA_CMD_CHAN_ENABLE_BIT 0 +#define MV_CESA_CMD_CHAN_ENABLE_MASK (1 << MV_CESA_CMD_CHAN_ENABLE_BIT) + +#define MV_CESA_CMD_CHAN_DISABLE_BIT 2 +#define MV_CESA_CMD_CHAN_DISABLE_MASK (1 << MV_CESA_CMD_CHAN_DISABLE_BIT) + +/********** Security Accelerator Descriptor Pointers Register **********/ +#define MV_CESA_CHAN_DESC_OFFSET_REG (MV_CESA_REG_BASE + 0xE04) + +/********** Security Accelerator Configuration Register **********/ +#define MV_CESA_CFG_REG (MV_CESA_REG_BASE + 0xE08) + +#define MV_CESA_CFG_STOP_DIGEST_ERR_BIT 0 +#define MV_CESA_CFG_STOP_DIGEST_ERR_MASK (1 << MV_CESA_CFG_STOP_DIGEST_ERR_BIT) + +#define MV_CESA_CFG_WAIT_DMA_BIT 7 +#define MV_CESA_CFG_WAIT_DMA_MASK (1 << MV_CESA_CFG_WAIT_DMA_BIT) + +#define MV_CESA_CFG_ACT_DMA_BIT 9 +#define MV_CESA_CFG_ACT_DMA_MASK (1 << MV_CESA_CFG_ACT_DMA_BIT) + +#define MV_CESA_CFG_CHAIN_MODE_BIT 11 +#define MV_CESA_CFG_CHAIN_MODE_MASK (1 << MV_CESA_CFG_CHAIN_MODE_BIT) + +/********** Security Accelerator Status Register ***********/ +#define MV_CESA_STATUS_REG (MV_CESA_REG_BASE + 0xE0C) + +#define MV_CESA_STATUS_ACTIVE_BIT 0 +#define MV_CESA_STATUS_ACTIVE_MASK (1 << MV_CESA_STATUS_ACTIVE_BIT) + +#define MV_CESA_STATUS_DIGEST_ERR_BIT 8 +#define MV_CESA_STATUS_DIGEST_ERR_MASK (1 << MV_CESA_STATUS_DIGEST_ERR_BIT) + + +/* Cryptographic Engines and Security Accelerator Interrupt Cause Register */ +#define MV_CESA_ISR_CAUSE_REG (MV_CESA_REG_BASE + 0xE20) + +/* Cryptographic Engines and Security Accelerator Interrupt Mask Register */ +#define MV_CESA_ISR_MASK_REG (MV_CESA_REG_BASE + 0xE24) + +#define MV_CESA_CAUSE_AUTH_MASK (1 << 0) +#define MV_CESA_CAUSE_DES_MASK (1 << 1) +#define MV_CESA_CAUSE_AES_ENCR_MASK (1 << 2) +#define MV_CESA_CAUSE_AES_DECR_MASK (1 << 3) +#define MV_CESA_CAUSE_DES_ALL_MASK (1 << 4) + +#define MV_CESA_CAUSE_ACC_BIT 5 +#define MV_CESA_CAUSE_ACC_MASK (1 << MV_CESA_CAUSE_ACC_BIT) + +#define MV_CESA_CAUSE_ACC_DMA_BIT 7 +#define MV_CESA_CAUSE_ACC_DMA_MASK (1 << MV_CESA_CAUSE_ACC_DMA_BIT) +#define MV_CESA_CAUSE_ACC_DMA_ALL_MASK (3 << MV_CESA_CAUSE_ACC_DMA_BIT) + +#define MV_CESA_CAUSE_DMA_COMPL_BIT 9 +#define MV_CESA_CAUSE_DMA_COMPL_MASK (1 << MV_CESA_CAUSE_DMA_COMPL_BIT) + +#define MV_CESA_CAUSE_DMA_OWN_ERR_BIT 10 +#define MV_CESA_CAUSE_DMA_OWN_ERR_MASK (1 < MV_CESA_CAUSE_DMA_OWN_ERR_BIT) + +#define MV_CESA_CAUSE_DMA_CHAIN_PKT_BIT 11 +#define MV_CESA_CAUSE_DMA_CHAIN_PKT_MASK (1 < MV_CESA_CAUSE_DMA_CHAIN_PKT_BIT) + + +#define MV_CESA_AUTH_DATA_IN_REG (MV_CESA_REG_BASE + 0xd38) +#define MV_CESA_AUTH_BIT_COUNT_LOW_REG (MV_CESA_REG_BASE + 0xd20) +#define MV_CESA_AUTH_BIT_COUNT_HIGH_REG (MV_CESA_REG_BASE + 0xd24) + +#define MV_CESA_AUTH_INIT_VAL_DIGEST_REG(i) (MV_CESA_REG_BASE + 0xd00 + (i<<2)) + +#define MV_CESA_AUTH_INIT_VAL_DIGEST_A_REG (MV_CESA_REG_BASE + 0xd00) +#define MV_CESA_AUTH_INIT_VAL_DIGEST_B_REG (MV_CESA_REG_BASE + 0xd04) +#define MV_CESA_AUTH_INIT_VAL_DIGEST_C_REG (MV_CESA_REG_BASE + 0xd08) +#define MV_CESA_AUTH_INIT_VAL_DIGEST_D_REG (MV_CESA_REG_BASE + 0xd0c) +#define MV_CESA_AUTH_INIT_VAL_DIGEST_E_REG (MV_CESA_REG_BASE + 0xd10) +#define MV_CESA_AUTH_COMMAND_REG (MV_CESA_REG_BASE + 0xd18) + +#define MV_CESA_AUTH_ALGORITHM_BIT 0 +#define MV_CESA_AUTH_ALGORITHM_MD5 (0< +wait_queue_head_t cesaTest_waitq; +spinlock_t cesaLock; + +#define CESA_TEST_LOCK(flags) spin_lock_irqsave( &cesaLock, flags) +#define CESA_TEST_UNLOCK(flags) spin_unlock_irqrestore( &cesaLock, flags); + +#define CESA_TEST_WAIT_INIT() init_waitqueue_head(&cesaTest_waitq) +#define CESA_TEST_WAKE_UP() wake_up(&cesaTest_waitq) +#define CESA_TEST_WAIT(cond, ms) wait_event_timeout(cesaTest_waitq, (cond), msecs_to_jiffies(ms)) + +#define CESA_TEST_TICK_GET() jiffies +#define CESA_TEST_TICK_TO_MS(tick) jiffies_to_msecs(tick) + +#elif defined(MV_NETBSD) + +#include +#include +static int cesaLock; + +#define CESA_TEST_LOCK(flags) flags = splnet() +#define CESA_TEST_UNLOCK(flags) splx(flags) + +#define CESA_TEST_WAIT_INIT() /* nothing */ +#define CESA_TEST_WAKE_UP() wakeup(&cesaLock) +#define CESA_TEST_WAIT(cond, ms) \ +do { \ + while (!(cond)) \ + tsleep(&cesaLock, PWAIT, "cesatest",mstohz(ms)); \ +} while (/*CONSTCOND*/0) + +#define CESA_TEST_TICK_GET() hardclock_ticks +#define CESA_TEST_TICK_TO_MS(tick) ((1000/hz)*(tick)) + +#define request_irq(i,h,t,n,a) \ + !mv_intr_establish((i),IPL_NET,(int(*)(void *))(h),(a)) + +#else +#error "Only Linux, VxWorks, or NetBSD OS are supported" +#endif + +#include "mvDebug.h" + +#include "mvSysHwConfig.h" +#include "boardEnv/mvBoardEnvLib.h" +#include "ctrlEnv/sys/mvCpuIf.h" +#include "cntmr/mvCntmr.h" +#include "cesa/mvCesa.h" +#include "cesa/mvCesaRegs.h" +#include "cesa/mvMD5.h" +#include "cesa/mvSHA1.h" + +#if defined(CONFIG_MV646xx) +#include "marvell_pic.h" +#endif + +#define MV_CESA_USE_TIMER_ID 0 +#define CESA_DEF_BUF_SIZE 1500 +#define CESA_DEF_BUF_NUM 1 +#define CESA_DEF_SESSION_NUM 32 + +#define CESA_DEF_ITER_NUM 100 + +#define CESA_DEF_REQ_SIZE 256 + + +/* CESA Tests Debug */ +#undef CESA_TEST_DEBUG + +#ifdef CESA_TEST_DEBUG + +# define CESA_TEST_DEBUG_PRINT(msg) mvOsPrintf msg +# define CESA_TEST_DEBUG_CODE(code) code + +typedef struct +{ + int type; /* 0 - isrEmpty, 1 - cesaReadyGet, 2 - cesaAction */ + MV_U32 timeStamp; + MV_U32 cause; + MV_U32 realCause; + MV_U32 dmaCause; + int resources; + MV_CESA_REQ* pReqReady; + MV_CESA_REQ* pReqEmpty; + MV_CESA_REQ* pReqProcess; +} MV_CESA_TEST_TRACE; + +#define MV_CESA_TEST_TRACE_SIZE 25 + +static int cesaTestTraceIdx = 0; +static MV_CESA_TEST_TRACE cesaTestTrace[MV_CESA_TEST_TRACE_SIZE]; + +static void cesaTestTraceAdd(int type, MV_U32 cause) +{ + cesaTestTrace[cesaTestTraceIdx].type = type; + cesaTestTrace[cesaTestTraceIdx].cause = cause; + cesaTestTrace[cesaTestTraceIdx].realCause = MV_REG_READ(MV_CESA_ISR_CAUSE_REG); + cesaTestTrace[cesaTestTraceIdx].dmaCause = MV_REG_READ(IDMA_CAUSE_REG); + cesaTestTrace[cesaTestTraceIdx].resources = cesaReqResources; + cesaTestTrace[cesaTestTraceIdx].pReqReady = pCesaReqReady; + cesaTestTrace[cesaTestTraceIdx].pReqEmpty = pCesaReqEmpty; + cesaTestTrace[cesaTestTraceIdx].pReqProcess = pCesaReqProcess; + cesaTestTrace[cesaTestTraceIdx].timeStamp = mvCntmrRead(MV_CESA_USE_TIMER_ID); + cesaTestTraceIdx++; + if(cesaTestTraceIdx == MV_CESA_TEST_TRACE_SIZE) + cesaTestTraceIdx = 0; +} + +#else + +# define CESA_TEST_DEBUG_PRINT(msg) +# define CESA_TEST_DEBUG_CODE(code) + +#endif /* CESA_TEST_DEBUG */ + +int cesaExpReqId=0; +int cesaCbIter=0; + +int cesaIdx; +int cesaIteration; +int cesaRateSize; +int cesaReqSize; +unsigned long cesaTaskId; +int cesaBufNum; +int cesaBufSize; +int cesaCheckOffset; +int cesaCheckSize; +int cesaCheckMode; +int cesaTestIdx; +int cesaCaseIdx; + + +MV_U32 cesaTestIsrCount = 0; +MV_U32 cesaTestIsrMissCount = 0; + +MV_U32 cesaCryptoError = 0; +MV_U32 cesaReqIdError = 0; +MV_U32 cesaError = 0; + +char* cesaHexBuffer = NULL; + +char* cesaBinBuffer = NULL; +char* cesaExpBinBuffer = NULL; + +char* cesaInputHexStr = NULL; +char* cesaOutputHexStr = NULL; + +MV_BUF_INFO cesaReqBufs[CESA_DEF_REQ_SIZE]; + +MV_CESA_COMMAND* cesaCmdRing; +MV_CESA_RESULT cesaResult; + +int cesaTestFull = 0; + +MV_BOOL cesaIsReady = MV_FALSE; +MV_U32 cesaCycles = 0; +MV_U32 cesaBeginTicks = 0; +MV_U32 cesaEndTicks = 0; +MV_U32 cesaRate = 0; +MV_U32 cesaRateAfterDot = 0; + +void *cesaTestOSHandle = NULL; + +enum +{ + CESA_FAST_CHECK_MODE = 0, + CESA_FULL_CHECK_MODE, + CESA_NULL_CHECK_MODE, + CESA_SHOW_CHECK_MODE, + CESA_SW_SHOW_CHECK_MODE, + CESA_SW_NULL_CHECK_MODE, + + CESA_MAX_CHECK_MODE +}; + +enum +{ + DES_TEST_TYPE = 0, + TRIPLE_DES_TEST_TYPE = 1, + AES_TEST_TYPE = 2, + MD5_TEST_TYPE = 3, + SHA_TEST_TYPE = 4, + COMBINED_TEST_TYPE = 5, + + MAX_TEST_TYPE +}; + +/* Tests data base */ +typedef struct +{ + short sid; + char cryptoAlgorithm; /* DES/3DES/AES */ + char cryptoMode; /* ECB or CBC */ + char macAlgorithm; /* MD5 / SHA1 */ + char operation; /* CRYPTO/HMAC/CRYPTO+HMAC/HMAC+CRYPTO */ + char direction; /* ENCODE(SIGN)/DECODE(VERIFY) */ + unsigned char* pCryptoKey; + int cryptoKeySize; + unsigned char* pMacKey; + int macKeySize; + const char* name; + +} MV_CESA_TEST_SESSION; + +typedef struct +{ + MV_CESA_TEST_SESSION* pSessions; + int numSessions; + +} MV_CESA_TEST_DB_ENTRY; + +typedef struct +{ + char* plainHexStr; + char* cipherHexStr; + unsigned char* pCryptoIV; + int cryptoLength; + int macLength; + int digestOffset; + +} MV_CESA_TEST_CASE; + +typedef struct +{ + int size; + const char* outputHexStr; + +} MV_CESA_SIZE_TEST; + +static unsigned char cryptoKey1[] = {0x01, 0x23, 0x45, 0x67, 0x89, 0xab, 0xcd, 0xef, + 0x01, 0x23, 0x45, 0x67, 0x89, 0xab, 0xcd, 0xef, + 0x01, 0x23, 0x45, 0x67, 0x89, 0xab, 0xcd, 0xef}; + +static unsigned char cryptoKey7[] = {0x01, 0x23, 0x45, 0x67, 0x89, 0xab, 0xcd, 0xef}; +static unsigned char iv1[] = {0x12, 0x34, 0x56, 0x78, 0x90, 0xab, 0xcd, 0xef}; + + +static unsigned char cryptoKey2[] = {0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, + 0x08, 0x09, 0x0A, 0x0B, 0x0C, 0x0D, 0x0E, 0x0F}; + +static unsigned char cryptoKey3[] = {0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, + 0x08, 0x09, 0x0A, 0x0B, 0x0C, 0x0D, 0x0E, 0x0F, + 0x10, 0x11, 0x12, 0x13, 0x14, 0x15, 0x16, 0x17}; + +static unsigned char cryptoKey4[] = {0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, + 0x08, 0x09, 0x0A, 0x0B, 0x0C, 0x0D, 0x0E, 0x0F, + 0x10, 0x11, 0x12, 0x13, 0x14, 0x15, 0x16, 0x17, + 0x18, 0x19, 0x1a, 0x1b, 0x1c, 0x1d, 0x1e, 0x1f}; + +static unsigned char cryptoKey5[] = {0x56, 0xe4, 0x7a, 0x38, 0xc5, 0x59, 0x89, 0x74, + 0xbc, 0x46, 0x90, 0x3d, 0xba, 0x29, 0x03, 0x49}; + + +static unsigned char key3des1[] = {0x01, 0x23, 0x45, 0x67, 0x89, 0xAB, 0xCD, 0xEF, + 0x23, 0x45, 0x67, 0x89, 0xAB, 0xCD, 0xEF, 0x01, + 0x45, 0x67, 0x89, 0xAB, 0xCD, 0xEF, 0x01, 0x23}; + +/* Input ASCII string: The quick brown fox jump */ +static char plain3des1[] = "54686520717566636B2062726F776E20666F78206A756D70"; +static char cipher3des1[] = "A826FD8CE53B855FCCE21C8112256FE668D5C05DD9B6B900"; + +static unsigned char key3des2[] = {0x62, 0x7f, 0x46, 0x0e, 0x08, 0x10, 0x4a, 0x10, + 0x43, 0xcd, 0x26, 0x5d, 0x58, 0x40, 0xea, 0xf1, + 0x31, 0x3e, 0xdf, 0x97, 0xdf, 0x2a, 0x8a, 0x8c}; + +static unsigned char iv3des2[] = {0x8e, 0x29, 0xf7, 0x5e, 0xa7, 0x7e, 0x54, 0x75}; + +static char plain3des2[] = "326a494cd33fe756"; + +static char cipher3desCbc2[] = "8e29f75ea77e5475" + "b22b8d66de970692"; + +static unsigned char key3des3[] = {0x37, 0xae, 0x5e, 0xbf, 0x46, 0xdf, 0xf2, 0xdc, + 0x07, 0x54, 0xb9, 0x4f, 0x31, 0xcb, 0xb3, 0x85, + 0x5e, 0x7f, 0xd3, 0x6d, 0xc8, 0x70, 0xbf, 0xae}; + +static unsigned char iv3des3[] = {0x3d, 0x1d, 0xe3, 0xcc, 0x13, 0x2e, 0x3b, 0x65}; + +static char plain3des3[] = "84401f78fe6c10876d8ea23094ea5309"; + +static char cipher3desCbc3[] = "3d1de3cc132e3b65" + "7b1f7c7e3b1c948ebd04a75ffba7d2f5"; + +static unsigned char iv5[] = {0x8c, 0xe8, 0x2e, 0xef, 0xbe, 0xa0, 0xda, 0x3c, + 0x44, 0x69, 0x9e, 0xd7, 0xdb, 0x51, 0xb7, 0xd9}; + +static unsigned char aesCtrKey[] = {0x76, 0x91, 0xBE, 0x03, 0x5E, 0x50, 0x20, 0xA8, + 0xAC, 0x6E, 0x61, 0x85, 0x29, 0xF9, 0xA0, 0xDC}; + +static unsigned char mdKey1[] = {0x0b, 0x0b, 0x0b, 0x0b, 0x0b, 0x0b, 0x0b, 0x0b, + 0x0b, 0x0b, 0x0b, 0x0b, 0x0b, 0x0b, 0x0b, 0x0b}; + +static unsigned char mdKey2[] = {0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, + 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa}; + +static unsigned char shaKey1[] = {0x0b, 0x0b, 0x0b, 0x0b, 0x0b, 0x0b, 0x0b, 0x0b, + 0x0b, 0x0b, 0x0b, 0x0b, 0x0b, 0x0b, 0x0b, 0x0b, + 0x0b, 0x0b, 0x0b, 0x0b}; + +static unsigned char shaKey2[] = {0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, + 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, + 0xaa, 0xaa, 0xaa, 0xaa}; + +static unsigned char mdKey4[] = {0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, 0x08, + 0x09, 0x0a, 0x0b, 0x0c, 0x0d, 0x0e, 0x0f, 0x10}; + +static unsigned char shaKey4[] = {0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, 0x08, + 0x09, 0x0a, 0x0b, 0x0c, 0x0d, 0x0e, 0x0f, 0x10, + 0x11, 0x12, 0x13, 0x14}; + + +static MV_CESA_TEST_SESSION desTestSessions[] = +{ +/*000*/ {-1, MV_CESA_CRYPTO_DES, MV_CESA_CRYPTO_ECB, + MV_CESA_MAC_NULL, MV_CESA_CRYPTO_ONLY, + MV_CESA_DIR_ENCODE, + cryptoKey7, sizeof(cryptoKey7)/sizeof(cryptoKey7[0]), + NULL, 0, + "DES ECB encode", + }, +/*001*/ {-1, MV_CESA_CRYPTO_DES, MV_CESA_CRYPTO_ECB, + MV_CESA_MAC_NULL, MV_CESA_CRYPTO_ONLY, + MV_CESA_DIR_DECODE, + cryptoKey7, sizeof(cryptoKey7)/sizeof(cryptoKey7[0]), + NULL, 0, + "DES ECB decode", + }, +/*002*/ {-1, MV_CESA_CRYPTO_DES, MV_CESA_CRYPTO_CBC, + MV_CESA_MAC_NULL, MV_CESA_CRYPTO_ONLY, + MV_CESA_DIR_ENCODE, + cryptoKey7, sizeof(cryptoKey7)/sizeof(cryptoKey7[0]), + NULL, 0, + "DES CBC encode" + }, +/*003*/ {-1, MV_CESA_CRYPTO_DES, MV_CESA_CRYPTO_CBC, + MV_CESA_MAC_NULL, MV_CESA_CRYPTO_ONLY, + MV_CESA_DIR_DECODE, + cryptoKey7, sizeof(cryptoKey7)/sizeof(cryptoKey7[0]), + NULL, 0, + "DES CBC decode" + }, +/*004*/ {-1, MV_CESA_CRYPTO_NULL, MV_CESA_CRYPTO_ECB, + MV_CESA_MAC_NULL, MV_CESA_CRYPTO_ONLY, + MV_CESA_DIR_ENCODE, + NULL, 0, NULL, 0, + "NULL Crypto Algorithm encode" + }, +}; + + +static MV_CESA_TEST_SESSION tripleDesTestSessions[] = +{ +/*100*/ {-1, MV_CESA_CRYPTO_3DES, MV_CESA_CRYPTO_ECB, + MV_CESA_MAC_NULL, MV_CESA_CRYPTO_ONLY, + MV_CESA_DIR_ENCODE, + cryptoKey1, sizeof(cryptoKey1)/sizeof(cryptoKey1[0]), + NULL, 0, + "3DES ECB encode", + }, +/*101*/ {-1, MV_CESA_CRYPTO_3DES, MV_CESA_CRYPTO_ECB, + MV_CESA_MAC_NULL, MV_CESA_CRYPTO_ONLY, + MV_CESA_DIR_DECODE, + cryptoKey1, sizeof(cryptoKey1)/sizeof(cryptoKey1[0]), + NULL, 0, + "3DES ECB decode", + }, +/*102*/ {-1, MV_CESA_CRYPTO_3DES, MV_CESA_CRYPTO_CBC, + MV_CESA_MAC_NULL, MV_CESA_CRYPTO_ONLY, + MV_CESA_DIR_ENCODE, + cryptoKey1, sizeof(cryptoKey1)/sizeof(cryptoKey1[0]), + NULL, 0, + "3DES CBC encode" + }, +/*103*/ {-1, MV_CESA_CRYPTO_3DES, MV_CESA_CRYPTO_CBC, + MV_CESA_MAC_NULL, MV_CESA_CRYPTO_ONLY, + MV_CESA_DIR_DECODE, + cryptoKey1, sizeof(cryptoKey1)/sizeof(cryptoKey1[0]), + NULL, 0, + "3DES CBC decode" + }, +/*104*/ {-1, MV_CESA_CRYPTO_3DES, MV_CESA_CRYPTO_ECB, + MV_CESA_MAC_NULL, MV_CESA_CRYPTO_ONLY, + MV_CESA_DIR_ENCODE, + key3des1, sizeof(key3des1), + NULL, 0, + "3DES ECB encode" + }, +/*105*/ {-1, MV_CESA_CRYPTO_3DES, MV_CESA_CRYPTO_CBC, + MV_CESA_MAC_NULL, MV_CESA_CRYPTO_ONLY, + MV_CESA_DIR_ENCODE, + key3des2, sizeof(key3des2), + NULL, 0, + "3DES ECB encode" + }, +/*106*/ {-1, MV_CESA_CRYPTO_3DES, MV_CESA_CRYPTO_CBC, + MV_CESA_MAC_NULL, MV_CESA_CRYPTO_ONLY, + MV_CESA_DIR_ENCODE, + key3des3, sizeof(key3des3), + NULL, 0, + "3DES ECB encode" + }, +}; + + +static MV_CESA_TEST_SESSION aesTestSessions[] = +{ +/*200*/ {-1, MV_CESA_CRYPTO_AES, MV_CESA_CRYPTO_ECB, + MV_CESA_MAC_NULL, MV_CESA_CRYPTO_ONLY, + MV_CESA_DIR_ENCODE, + cryptoKey2, sizeof(cryptoKey2)/sizeof(cryptoKey2[0]), + NULL, 0, + "AES-128 ECB encode" + }, +/*201*/ {-1, MV_CESA_CRYPTO_AES, MV_CESA_CRYPTO_ECB, + MV_CESA_MAC_NULL, MV_CESA_CRYPTO_ONLY, + MV_CESA_DIR_DECODE, + cryptoKey2, sizeof(cryptoKey2)/sizeof(cryptoKey2[0]), + NULL, 0, + "AES-128 ECB decode" + }, +/*202*/ {-1, MV_CESA_CRYPTO_AES, MV_CESA_CRYPTO_CBC, + MV_CESA_MAC_NULL, MV_CESA_CRYPTO_ONLY, + MV_CESA_DIR_ENCODE, + cryptoKey5, sizeof(cryptoKey5)/sizeof(cryptoKey5[0]), + NULL, 0, + "AES-128 CBC encode" + }, +/*203*/ {-1, MV_CESA_CRYPTO_AES, MV_CESA_CRYPTO_CBC, + MV_CESA_MAC_NULL, MV_CESA_CRYPTO_ONLY, + MV_CESA_DIR_DECODE, + cryptoKey5, sizeof(cryptoKey5)/sizeof(cryptoKey5[0]), + NULL, 0, + "AES-128 CBC decode" + }, +/*204*/ {-1, MV_CESA_CRYPTO_AES, MV_CESA_CRYPTO_ECB, + MV_CESA_MAC_NULL, MV_CESA_CRYPTO_ONLY, + MV_CESA_DIR_ENCODE, + cryptoKey3, sizeof(cryptoKey3)/sizeof(cryptoKey3[0]), + NULL, 0, + "AES-192 ECB encode" + }, +/*205*/ {-1, MV_CESA_CRYPTO_AES, MV_CESA_CRYPTO_ECB, + MV_CESA_MAC_NULL, MV_CESA_CRYPTO_ONLY, + MV_CESA_DIR_DECODE, + cryptoKey3, sizeof(cryptoKey3)/sizeof(cryptoKey3[0]), + NULL, 0, + "AES-192 ECB decode" + }, +/*206*/ {-1, MV_CESA_CRYPTO_AES, MV_CESA_CRYPTO_ECB, + MV_CESA_MAC_NULL, MV_CESA_CRYPTO_ONLY, + MV_CESA_DIR_ENCODE, + cryptoKey4, sizeof(cryptoKey4)/sizeof(cryptoKey4[0]), + NULL, 0, + "AES-256 ECB encode" + }, +/*207*/ {-1, MV_CESA_CRYPTO_AES, MV_CESA_CRYPTO_ECB, + MV_CESA_MAC_NULL, MV_CESA_CRYPTO_ONLY, + MV_CESA_DIR_DECODE, + cryptoKey4, sizeof(cryptoKey4)/sizeof(cryptoKey4[0]), + NULL, 0, + "AES-256 ECB decode" + }, +/*208*/ {-1, MV_CESA_CRYPTO_AES, MV_CESA_CRYPTO_CTR, + MV_CESA_MAC_NULL, MV_CESA_CRYPTO_ONLY, + MV_CESA_DIR_ENCODE, + aesCtrKey, sizeof(aesCtrKey)/sizeof(aesCtrKey[0]), + NULL, 0, + "AES-128 CTR encode" + }, +}; + + +static MV_CESA_TEST_SESSION md5TestSessions[] = +{ +/*300*/ {-1, MV_CESA_CRYPTO_NULL, MV_CESA_CRYPTO_ECB, + MV_CESA_MAC_HMAC_MD5, MV_CESA_MAC_ONLY, + MV_CESA_DIR_ENCODE, + NULL, 0, + mdKey1, sizeof(mdKey1), + "HMAC-MD5 Generate Signature" + }, +/*301*/ {-1, MV_CESA_CRYPTO_NULL, MV_CESA_CRYPTO_ECB, + MV_CESA_MAC_HMAC_MD5, MV_CESA_MAC_ONLY, + MV_CESA_DIR_DECODE, + NULL, 0, + mdKey1, sizeof(mdKey1), + "HMAC-MD5 Verify Signature" + }, +/*302*/ {-1, MV_CESA_CRYPTO_NULL, MV_CESA_CRYPTO_ECB, + MV_CESA_MAC_HMAC_MD5, MV_CESA_MAC_ONLY, + MV_CESA_DIR_ENCODE, + NULL, 0, + mdKey2, sizeof(mdKey2), + "HMAC-MD5 Generate Signature" + }, +/*303*/ {-1, MV_CESA_CRYPTO_NULL, MV_CESA_CRYPTO_ECB, + MV_CESA_MAC_HMAC_MD5, MV_CESA_MAC_ONLY, + MV_CESA_DIR_DECODE, + NULL, 0, + mdKey2, sizeof(mdKey2), + "HMAC-MD5 Verify Signature" + }, +/*304*/ {-1, MV_CESA_CRYPTO_NULL, MV_CESA_CRYPTO_ECB, + MV_CESA_MAC_HMAC_MD5, MV_CESA_MAC_ONLY, + MV_CESA_DIR_ENCODE, + NULL, 0, + mdKey4, sizeof(mdKey4), + "HMAC-MD5 Generate Signature" + }, +/*305*/ {-1, MV_CESA_CRYPTO_NULL, MV_CESA_CRYPTO_ECB, + MV_CESA_MAC_MD5, MV_CESA_MAC_ONLY, + MV_CESA_DIR_ENCODE, + NULL, 0, + NULL, 0, + "HASH-MD5 Generate Signature" + }, +}; + + +static MV_CESA_TEST_SESSION shaTestSessions[] = +{ +/*400*/ {-1, MV_CESA_CRYPTO_NULL, MV_CESA_CRYPTO_ECB, + MV_CESA_MAC_HMAC_SHA1, MV_CESA_MAC_ONLY, + MV_CESA_DIR_ENCODE, + NULL, 0, + shaKey1, sizeof(shaKey1), + "HMAC-SHA1 Generate Signature" + }, +/*401*/ {-1, MV_CESA_CRYPTO_NULL, MV_CESA_CRYPTO_ECB, + MV_CESA_MAC_HMAC_SHA1, MV_CESA_MAC_ONLY, + MV_CESA_DIR_DECODE, + NULL, 0, + shaKey1, sizeof(shaKey1), + "HMAC-SHA1 Verify Signature" + }, +/*402*/ {-1, MV_CESA_CRYPTO_NULL, MV_CESA_CRYPTO_ECB, + MV_CESA_MAC_HMAC_SHA1, MV_CESA_MAC_ONLY, + MV_CESA_DIR_ENCODE, + NULL, 0, + shaKey2, sizeof(shaKey2), + "HMAC-SHA1 Generate Signature" + }, +/*403*/ {-1, MV_CESA_CRYPTO_NULL, MV_CESA_CRYPTO_ECB, + MV_CESA_MAC_HMAC_SHA1, MV_CESA_MAC_ONLY, + MV_CESA_DIR_DECODE, + NULL, 0, + shaKey2, sizeof(shaKey2), + "HMAC-SHA1 Verify Signature" + }, +/*404*/ {-1, MV_CESA_CRYPTO_NULL, MV_CESA_CRYPTO_ECB, + MV_CESA_MAC_HMAC_SHA1, MV_CESA_MAC_ONLY, + MV_CESA_DIR_ENCODE, + NULL, 0, + shaKey4, sizeof(shaKey4), + "HMAC-SHA1 Generate Signature" + }, +/*405*/ {-1, MV_CESA_CRYPTO_NULL, MV_CESA_CRYPTO_ECB, + MV_CESA_MAC_SHA1, MV_CESA_MAC_ONLY, + MV_CESA_DIR_ENCODE, + NULL, 0, + NULL, 0, + "HASH-SHA1 Generate Signature" + }, +}; + +static MV_CESA_TEST_SESSION combinedTestSessions[] = +{ +/*500*/ {-1, MV_CESA_CRYPTO_DES, MV_CESA_CRYPTO_ECB, + MV_CESA_MAC_HMAC_MD5, MV_CESA_CRYPTO_THEN_MAC, + MV_CESA_DIR_ENCODE, + cryptoKey1, MV_CESA_DES_KEY_LENGTH, + mdKey4, sizeof(mdKey4), + "DES + MD5 encode" + }, +/*501*/ {-1, MV_CESA_CRYPTO_DES, MV_CESA_CRYPTO_ECB, + MV_CESA_MAC_HMAC_SHA1, MV_CESA_CRYPTO_THEN_MAC, + MV_CESA_DIR_ENCODE, + cryptoKey1, MV_CESA_DES_KEY_LENGTH, + shaKey4, sizeof(shaKey4), + "DES + SHA1 encode" + }, +/*502*/ {-1, MV_CESA_CRYPTO_3DES, MV_CESA_CRYPTO_ECB, + MV_CESA_MAC_HMAC_MD5, MV_CESA_CRYPTO_THEN_MAC, + MV_CESA_DIR_ENCODE, + cryptoKey1, sizeof(cryptoKey1)/sizeof(cryptoKey1[0]), + mdKey4, sizeof(mdKey4), + "3DES + MD5 encode" + }, +/*503*/ {-1, MV_CESA_CRYPTO_3DES, MV_CESA_CRYPTO_ECB, + MV_CESA_MAC_HMAC_SHA1, MV_CESA_CRYPTO_THEN_MAC, + MV_CESA_DIR_ENCODE, + cryptoKey1, sizeof(cryptoKey1)/sizeof(cryptoKey1[0]), + shaKey4, sizeof(shaKey4), + "3DES + SHA1 encode" + }, +/*504*/ {-1, MV_CESA_CRYPTO_3DES, MV_CESA_CRYPTO_CBC, + MV_CESA_MAC_HMAC_MD5, MV_CESA_CRYPTO_THEN_MAC, + MV_CESA_DIR_ENCODE, + cryptoKey1, sizeof(cryptoKey1)/sizeof(cryptoKey1[0]), + mdKey4, sizeof(mdKey4), + "3DES CBC + MD5 encode" + }, +/*505*/ {-1, MV_CESA_CRYPTO_3DES, MV_CESA_CRYPTO_CBC, + MV_CESA_MAC_HMAC_SHA1, MV_CESA_CRYPTO_THEN_MAC, + MV_CESA_DIR_ENCODE, + cryptoKey1, sizeof(cryptoKey1)/sizeof(cryptoKey1[0]), + shaKey4, sizeof(shaKey4), + "3DES CBC + SHA1 encode" + }, +/*506*/ {-1, MV_CESA_CRYPTO_AES, MV_CESA_CRYPTO_CBC, + MV_CESA_MAC_HMAC_MD5, MV_CESA_CRYPTO_THEN_MAC, + MV_CESA_DIR_ENCODE, + cryptoKey5, sizeof(cryptoKey5)/sizeof(cryptoKey5[0]), + mdKey4, sizeof(mdKey4), + "AES-128 CBC + MD5 encode" + }, +/*507*/ {-1, MV_CESA_CRYPTO_AES, MV_CESA_CRYPTO_CBC, + MV_CESA_MAC_HMAC_SHA1, MV_CESA_CRYPTO_THEN_MAC, + MV_CESA_DIR_ENCODE, + cryptoKey5, sizeof(cryptoKey5)/sizeof(cryptoKey5[0]), + shaKey4, sizeof(shaKey4), + "AES-128 CBC + SHA1 encode" + }, +/*508*/ {-1, MV_CESA_CRYPTO_3DES, MV_CESA_CRYPTO_ECB, + MV_CESA_MAC_HMAC_MD5, MV_CESA_MAC_THEN_CRYPTO, + MV_CESA_DIR_DECODE, + cryptoKey1, sizeof(cryptoKey1)/sizeof(cryptoKey1[0]), + mdKey4, sizeof(mdKey4), + "HMAC-MD5 + 3DES decode" + }, +}; + + +static MV_CESA_TEST_DB_ENTRY cesaTestsDB[MAX_TEST_TYPE+1] = +{ + { desTestSessions, sizeof(desTestSessions)/sizeof(desTestSessions[0]) }, + { tripleDesTestSessions, sizeof(tripleDesTestSessions)/sizeof(tripleDesTestSessions[0]) }, + { aesTestSessions, sizeof(aesTestSessions)/sizeof(aesTestSessions[0]) }, + { md5TestSessions, sizeof(md5TestSessions)/sizeof(md5TestSessions[0]) }, + { shaTestSessions, sizeof(shaTestSessions)/sizeof(shaTestSessions[0]) }, + { combinedTestSessions, sizeof(combinedTestSessions)/sizeof(combinedTestSessions[0]) }, + { NULL, 0 } +}; + + +char cesaNullPlainHexText[] = "000000000000000000000000000000000000000000000000"; + +char cesaPlainAsciiText[] = "Now is the time for all "; +char cesaPlainHexEbc[] = "4e6f77206973207468652074696d6520666f7220616c6c20"; +char cesaCipherHexEcb[] = "3fa40e8a984d48156a271787ab8883f9893d51ec4b563b53"; +char cesaPlainHexCbc[] = "1234567890abcdef4e6f77206973207468652074696d6520666f7220616c6c20"; +char cesaCipherHexCbc[] = "1234567890abcdefe5c7cdde872bf27c43e934008c389c0f683788499a7c05f6"; + +char cesaAesPlainHexEcb[] = "000102030405060708090a0b0c0d0e0f"; +char cesaAes128cipherHexEcb[] = "0a940bb5416ef045f1c39458c653ea5a"; +char cesaAes192cipherHexEcb[] = "0060bffe46834bb8da5cf9a61ff220ae"; +char cesaAes256cipherHexEcb[] = "5a6e045708fb7196f02e553d02c3a692"; + +char cesaAsciiStr1[] = "Hi There"; +char cesaDataHexStr1[] = "4869205468657265"; +char cesaHmacMd5digestHex1[] = "9294727a3638bb1c13f48ef8158bfc9d"; +char cesaHmacSha1digestHex1[] = "b617318655057264e28bc0b6fb378c8ef146be00"; +char cesaDataAndMd5digest1[] = "48692054686572659294727a3638bb1c13f48ef8158bfc9d"; +char cesaDataAndSha1digest1[] = "4869205468657265b617318655057264e28bc0b6fb378c8ef146be00"; + +char cesaAesPlainText[] = "a0a1a2a3a4a5a6a7a8a9aaabacadaeaf" + "b0b1b2b3b4b5b6b7b8b9babbbcbdbebf" + "c0c1c2c3c4c5c6c7c8c9cacbcccdcecf" + "d0d1d2d3d4d5d6d7d8d9dadbdcdddedf"; + +char cesaAes128CipherCbc[] = "c30e32ffedc0774e6aff6af0869f71aa" + "0f3af07a9a31a9c684db207eb0ef8e4e" + "35907aa632c3ffdf868bb7b29d3d46ad" + "83ce9f9a102ee99d49a53e87f4c3da55"; + +char cesaAesIvPlainText[] = "8ce82eefbea0da3c44699ed7db51b7d9" + "a0a1a2a3a4a5a6a7a8a9aaabacadaeaf" + "b0b1b2b3b4b5b6b7b8b9babbbcbdbebf" + "c0c1c2c3c4c5c6c7c8c9cacbcccdcecf" + "d0d1d2d3d4d5d6d7d8d9dadbdcdddedf"; + +char cesaAes128IvCipherCbc[] = "8ce82eefbea0da3c44699ed7db51b7d9" + "c30e32ffedc0774e6aff6af0869f71aa" + "0f3af07a9a31a9c684db207eb0ef8e4e" + "35907aa632c3ffdf868bb7b29d3d46ad" + "83ce9f9a102ee99d49a53e87f4c3da55"; + +char cesaAesCtrPlain[] = "00E0017B27777F3F4A1786F000000001" + "000102030405060708090A0B0C0D0E0F" + "101112131415161718191A1B1C1D1E1F" + "20212223"; + +char cesaAesCtrCipher[] = "00E0017B27777F3F4A1786F000000001" + "C1CF48A89F2FFDD9CF4652E9EFDB72D7" + "4540A42BDE6D7836D59A5CEAAEF31053" + "25B2072F"; + + + +/* Input cesaHmacHex3 is '0xdd' repeated 50 times */ +char cesaHmacMd5digestHex3[] = "56be34521d144c88dbb8c733f0e8b3f6"; +char cesaHmacSha1digestHex3[] = "125d7342b9ac11cd91a39af48aa17b4f63f175d3"; +char cesaDataHexStr3[50*2+1] = ""; +char cesaDataAndMd5digest3[sizeof(cesaDataHexStr3)+sizeof(cesaHmacMd5digestHex3)+8*2+1] = ""; +char cesaDataAndSha1digest3[sizeof(cesaDataHexStr3)+sizeof(cesaHmacSha1digestHex3)+8*2+1] = ""; + +/* Ascii string is "abc" */ +char hashHexStr3[] = "616263"; +char hashMd5digest3[] = "900150983cd24fb0d6963f7d28e17f72"; +char hashSha1digest3[] = "a9993e364706816aba3e25717850c26c9cd0d89d"; + +char hashHexStr80[] = "31323334353637383930" + "31323334353637383930" + "31323334353637383930" + "31323334353637383930" + "31323334353637383930" + "31323334353637383930" + "31323334353637383930" + "31323334353637383930"; + +char hashMd5digest80[] = "57edf4a22be3c955ac49da2e2107b67a"; + +char tripleDesThenMd5digest80[] = "b7726a03aad490bd6c5a452a89a1b271"; +char tripleDesThenSha1digest80[] = "b2ddeaca91030eab5b95a234ef2c0f6e738ff883"; + +char cbc3desThenMd5digest80[] = "6f463057e1a90e0e91ae505b527bcec0"; +char cbc3desThenSha1digest80[] = "1b002ed050be743aa98860cf35659646bb8efcc0"; + +char cbcAes128ThenMd5digest80[] = "6b6e863ac5a71d15e3e9b1c86c9ba05f"; +char cbcAes128ThenSha1digest80[] = "13558472d1fc1c90dffec6e5136c7203452d509b"; + + +static MV_CESA_TEST_CASE cesaTestCases[] = +{ + /* plainHexStr cipherHexStr IV crypto mac digest */ + /* Length Length Offset */ + /*0*/ { NULL, NULL, NULL, 0, 0, -1 }, + /*1*/ { cesaPlainHexEbc, cesaCipherHexEcb, NULL, 24, 0, -1 }, + /*2*/ { cesaPlainHexCbc, cesaCipherHexCbc, NULL, 24, 0, -1 }, + /*3*/ { cesaAesPlainHexEcb, cesaAes128cipherHexEcb, NULL, 16, 0, -1 }, + /*4*/ { cesaAesPlainHexEcb, cesaAes192cipherHexEcb, NULL, 16, 0, -1 }, + /*5*/ { cesaAesPlainHexEcb, cesaAes256cipherHexEcb, NULL, 16, 0, -1 }, + /*6*/ { cesaDataHexStr1, cesaHmacMd5digestHex1, NULL, 0, 8, -1 }, + /*7*/ { NULL, cesaDataAndMd5digest1, NULL, 0, 8, -1 }, + /*8*/ { cesaDataHexStr3, cesaHmacMd5digestHex3, NULL, 0, 50, -1 }, + /*9*/ { NULL, cesaDataAndMd5digest3, NULL, 0, 50, -1 }, +/*10*/ { cesaAesPlainText, cesaAes128IvCipherCbc, iv5, 64, 0, -1 }, +/*11*/ { cesaDataHexStr1, cesaHmacSha1digestHex1, NULL, 0, 8, -1 }, +/*12*/ { NULL, cesaDataAndSha1digest1, NULL, 0, 8, -1 }, +/*13*/ { cesaDataHexStr3, cesaHmacSha1digestHex3, NULL, 0, 50, -1 }, +/*14*/ { NULL, cesaDataAndSha1digest3, NULL, 0, 50, -1 }, +/*15*/ { hashHexStr3, hashMd5digest3, NULL, 0, 3, -1 }, +/*16*/ { hashHexStr3, hashSha1digest3, NULL, 0, 3, -1 }, +/*17*/ { hashHexStr80, tripleDesThenMd5digest80, NULL, 80, 80, -1 }, +/*18*/ { hashHexStr80, tripleDesThenSha1digest80, NULL, 80, 80, -1 }, +/*19*/ { hashHexStr80, cbc3desThenMd5digest80, iv1, 80, 80, -1 }, +/*20*/ { hashHexStr80, cbc3desThenSha1digest80, iv1, 80, 80, -1 }, +/*21*/ { hashHexStr80, cbcAes128ThenMd5digest80, iv5, 80, 80, -1 }, +/*22*/ { hashHexStr80, cbcAes128ThenSha1digest80, iv5, 80, 80, -1 }, +/*23*/ { cesaAesCtrPlain, cesaAesCtrCipher, NULL, 36, 0, -1 }, +/*24*/ { cesaAesIvPlainText, cesaAes128IvCipherCbc, NULL, 64, 0, -1 }, +/*25*/ { plain3des1, cipher3des1, NULL, 0, 0, -1 }, +/*26*/ { plain3des2, cipher3desCbc2, iv3des2,0, 0, -1 }, +/*27*/ { plain3des3, cipher3desCbc3, iv3des3,0, 0, -1 }, +}; + + +/* Key = 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, + * 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa + * Input 0xdd repeated "size" times + */ +static MV_CESA_SIZE_TEST mdMultiSizeTest302[] = +{ + { 80, "7a031a640c14a4872814930b1ef3a5b2" }, + { 512, "5488e6c5a14dc72a79f28312ca5b939b" }, + { 1000, "d00814f586a8b78a05724239d2531821" }, + { 1001, "bf07df7b7f49d3f5b5ecacd4e9e63281" }, + { 1002, "1ed4a1a802e87817a819d4e37bb4d0f7" }, + { 1003, "5972ab64a4f265ee371dac2f2f137f90" }, + { 1004, "71f95e7ec3aa7df2548e90898abdb28e" }, + { 1005, "e082790b4857fcfc266e92e59e608814" }, + { 1006, "9500f02fd8ac7fde8b10e4fece9a920d" }, + { 1336, "e42edcce57d0b75b01aa09d71427948b" }, + { 1344, "bb5454ada0deb49ba0a97ffd60f57071" }, + { 1399, "0f44d793e744b24d53f44f295082ee8c" }, + { 1400, "359de8a03a9b707928c6c60e0e8d79f1" }, + { 1401, "e913858b484cbe2b384099ea88d8855b" }, + { 1402, "d9848a164af53620e0540c1d7d87629e" }, + { 1403, "0c9ee1c2c9ef45e9b625c26cbaf3e822" }, + { 1404, "12edd4f609416e3c936170360561b064" }, + { 1405, "7fc912718a05446395345009132bf562" }, + { 1406, "882f17425e579ff0d85a91a59f308aa0" }, + { 1407, "005cae408630a2fb5db82ad9db7e59da" }, + { 1408, "64655f8b404b3fea7a3e3e609bc5088f" }, + { 1409, "4a145284a7f74e01b6bb1a0ec6a0dd80" }, + { 2048, "67caf64475650732def374ebb8bde3fd" }, + { 2049, "6c84f11f472825f7e6cd125c2981884b" }, + { 2050, "8999586754a73a99efbe4dbad2816d41" }, + { 2051, "ba6946b610e098d286bc81091659dfff" }, + { 2052, "d0afa01c92d4d13def2b024f36faed83" }, + { 3072, "61d8beac61806afa2585d74a9a0e6974" }, + { 3074, "f6501a28dcc24d1e4770505c51a87ed3" }, + { 3075, "ea4a6929be67e33e61ff475369248b73" }, + { 4048, "aa8c4d68f282a07e7385acdfa69f4bed" }, + { 4052, "afb5ed2c0e1d430ea59e59ed5ed6b18a" }, + { 4058, "9e8553f9bdd43aebe0bd729f0e600c99" }, + { 6144, "f628f3e5d183fe5cdd3a5abee39cf872" }, + { 6150, "89a3efcea9a2f25f919168ad4a1fd292" }, + { 6400, "cdd176b7fb747873efa4da5e32bdf88f" }, + { 6528, "b1d707b027354aca152c45ee559ccd3f" }, + { 8192, "c600ea4429ac47f9941f09182166e51a" }, + {16384, "16e8754bfbeb4c649218422792267a37" }, + {18432, "0fd0607521b0aa8b52219cfbe215f63e" }, + { 0, NULL }, +}; + +/* Key = 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, 0x08, + * 0x09, 0x0a, 0x0b, 0x0c, 0x0d, 0x0e, 0x0f, 0x10 + * InputHexStr = "31323334353637383930" (ASCII = "1234567890") + */ +static MV_CESA_SIZE_TEST mdMultiSizeTest304[] = +{ + { 80, "a456c4723fee6068530af5a2afa71627" }, + { 512, "f85c2a2344f5de68b432208ad13e5794" }, + { 1000, "35464d6821fd4a293a41eb84e274c8c5" }, + { 1001, "c08eedbdce60cceb54bc2d732bb32c8b" }, + { 1002, "5664f71800c011cc311cb6943339c1b8" }, + { 1003, "779c723b044c585dc7802b13e8501bdc" }, + { 1004, "55e500766a2c307bc5c5fdd15e4cacd4" }, + { 1005, "d5f978954f5c38529d1679d2b714f068" }, + { 1006, "cd3efc827ce628b7281b72172693abf9" }, + { 1336, "6f04479910785878ae6335b8d1e87edf" }, + { 1344, "b6d27b50c2bce1ba2a8e1b5cc4324368" }, + { 1399, "65f70a1d4c86e5eaeb0704c8a7816795" }, + { 1400, "3394b5adc4cb3ff98843ca260a44a88a" }, + { 1401, "3a06f3582033a66a4e57e0603ce94e74" }, + { 1402, "e4d97f5ed51edc48abfa46eeb5c31752" }, + { 1403, "3d05e40b080ee3bedf293cb87b7140e7" }, + { 1404, "8cf294fc3cd153ab18dccb2a52cbf244" }, + { 1405, "d1487bd42f6edd9b4dab316631159221" }, + { 1406, "0527123b6bf6936cf5d369dc18c6c70f" }, + { 1407, "3224a06639db70212a0cd1ae1fcc570a" }, + { 1408, "a9e13335612c0356f5e2c27086e86c43" }, + { 1409, "a86d1f37d1ed8a3552e9a4f04dceea98" }, + { 2048, "396905c9b961cd0f6152abfb69c4449c" }, + { 2049, "49f39bff85d9dcf059fadb89efc4a70f" }, + { 2050, "3a2b4823bc4d0415656550226a63e34a" }, + { 2051, "dec60580d406c782540f398ad0bcc7e0" }, + { 2052, "32f76610a14310309eb748fe025081bf" }, + { 3072, "45edc1a42bf9d708a621076b63b774da" }, + { 3074, "9be1b333fe7c0c9f835fb369dc45f778" }, + { 3075, "8c06fcac7bd0e7b7a17fd6508c09a549" }, + { 4048, "0ddaef848184bf0ad98507a10f1e90e4" }, + { 4052, "81976bcaeb274223983996c137875cb8" }, + { 4058, "0b0a7a1c82bc7cbc64d8b7cd2dc2bb22" }, + { 6144, "1c24056f52725ede2dff0d7f9fc9855f" }, + { 6150, "b7f4b65681c4e43ee68ca466ca9ca4ec" }, + { 6400, "443bbaab9f7331ddd4bf11b659cd43c8" }, + { 6528, "216f44f23047cfee03a7a64f88f9a995" }, + { 8192, "ac7a993b2cad54879dba1bde63e39097" }, + { 8320, "55ed7be9682d6c0025b3221a62088d08" }, + {16384, "c6c722087653b62007aea668277175e5" }, + {18432, "f1faca8e907872c809e14ffbd85792d6" }, + { 0, NULL }, +}; + +/* HASH-MD5 + * InputHexStr = "31323334353637383930" (ASCII = "1234567890") + * repeated "size" times + */ +static MV_CESA_SIZE_TEST mdMultiSizeTest305[] = +{ + { 80, "57edf4a22be3c955ac49da2e2107b67a" }, + { 512, "c729ae8f0736cc377a9767a660eaa04e" }, + { 1000, "f1257a8659eb92d36fe14c6bf3852a6a" }, + { 1001, "f8a46fe8ea04fdc8c7de0e84042d3878" }, + { 1002, "da188dd67bff87d58aa3c02af2d0cc0f" }, + { 1003, "961753017feee04c9b93a8e51658a829" }, + { 1004, "dd68c4338608dcc87807a711636bf2af" }, + { 1005, "e338d567d3ce66bf69ada29658a8759b" }, + { 1006, "443c9811e8b92599b0b149e8d7ec700a" }, + { 1336, "89a98511706008ba4cbd0b4a24fa5646" }, + { 1344, "335a919805f370b9e402a62c6fe01739" }, + { 1399, "5d18d0eddcd84212fe28d812b5e80e3b" }, + { 1400, "6b695c240d2dffd0dffc99459ca76db6" }, + { 1401, "49590f61298a76719bc93a57a30136f5" }, + { 1402, "94c2999fa3ef1910a683d69b2b8476f2" }, + { 1403, "37073a02ab00ecba2645c57c228860db" }, + { 1404, "1bcd06994fce28b624f0c5fdc2dcdd2b" }, + { 1405, "11b93671a64c95079e8cf9e7cddc8b3d" }, + { 1406, "4b6695772a4c66313fa4871017d05f36" }, + { 1407, "d1539b97fbfda1c075624e958de19c5b" }, + { 1408, "b801b9b69920907cd018e8063092ede9" }, + { 1409, "b765f1406cfe78e238273ed01bbcaf7e" }, + { 2048, "1d7e2c64ac29e2b3fb4c272844ed31f5" }, + { 2049, "71d38fac49c6b1f4478d8d88447bcdd0" }, + { 2050, "141c34a5592b1bebfa731e0b23d0cdba" }, + { 2051, "c5e1853f21c59f5d6039bd13d4b380d8" }, + { 2052, "dd44a0d128b63d4b5cccd967906472d7" }, + { 3072, "37d158e33b21390822739d13db7b87fe" }, + { 3074, "aef3b209d01d39d0597fe03634bbf441" }, + { 3075, "335ffb428eabf210bada96d74d5a4012" }, + { 4048, "2434c2b43d798d2819487a886261fc64" }, + { 4052, "ac2fa84a8a33065b2e92e36432e861f8" }, + { 4058, "856781f85616c341c3533d090c1e1e84" }, + { 6144, "e5d134c652c18bf19833e115f7a82e9b" }, + { 6150, "a09a353be7795fac2401dac5601872e6" }, + { 6400, "08b9033ac6a1821398f50af75a2dbc83" }, + { 6528, "3d47aa193a8540c091e7e02f779e6751" }, + { 8192, "d3164e710c0626f6f395b38f20141cb7" }, + { 8320, "b727589d9183ff4e8491dd24466974a3" }, + {16384, "3f54d970793d2274d5b20d10a69938ac" }, + {18432, "f558511dcf81985b7a1bb57fad970531" }, + { 0, NULL }, +}; + + +/* Key = 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, + * 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa + * 0xaa, 0xaa, 0xaa, 0xaa + * InputHexStr = "31323334353637383930" (ASCII = "1234567890") + */ +static MV_CESA_SIZE_TEST shaMultiSizeTest402[] = +{ + { 80, "e812f370e659705a1649940d1f78cd7af18affd3" }, + { 512, "e547f886b2c15d995ed76a8a924cb408c8080f66" }, + { 1000, "239443194409f1a5342ecde1a092c8f3a3ed790a" }, + { 1001, "f278ab9a102850a9f48dc4e9e6822afe2d0c52b5" }, + { 1002, "8bcc667df5ab6ece988b3af361d09747c77f4e72" }, + { 1003, "0fae6046c7dc1d3e356b25af836f6077a363f338" }, + { 1004, "0ea48401cc92ae6bc92ae76685269cb0167fbe1a" }, + { 1005, "ecbcd7c879b295bafcd8766cbeac58cc371e31d1" }, + { 1006, "eb4a4a3d07d1e9a15e6f1ab8a9c47f243e27324c" }, + { 1336, "f5950ee1d77c10e9011d2149699c9366fe52529c" }, + { 1344, "b04263604a63c351b0b3b9cf1785b4bdba6c8838" }, + { 1399, "8cb1cff61d5b784045974a2fc69386e3b8d24218" }, + { 1400, "9bb2f3fcbeddb2b90f0be797cd647334a2816d51" }, + { 1401, "23ae462a7a0cb440f7445791079a5d75a535dd33" }, + { 1402, "832974b524a4d3f9cc2f45a3cabf5ccef65cd2aa" }, + { 1403, "d1c683742fe404c3c20d5704a5430e7832a7ec95" }, + { 1404, "867c79042e64f310628e219d8b85594cd0c7adc3" }, + { 1405, "c9d81d49d13d94358f56ccfd61af02b36c69f7c3" }, + { 1406, "0df43daab2786172f9b8d07d61f14a070cf1287a" }, + { 1407, "0fd8f3ad7f169534b274d4c66bbddd89f759e391" }, + { 1408, "3987511182b18473a564436003139b808fa46343" }, + { 1409, "ef667e063c9e9f539a8987a8d0bd3066ee85d901" }, + { 2048, "921109c99f3fedaca21727156d5f2b4460175327" }, + { 2049, "47188600dd165eb45f27c27196d3c46f4f042c1b" }, + { 2050, "8831939904009338de10e7fa670847041387807d" }, + { 2051, "2f8ebb5db2997d614e767be1050366f3641e7520" }, + { 2052, "669e51cd730dae158d3bef8adba075bd95a0d011" }, + { 3072, "cfee66cfd83abc8451af3c96c6b35a41cc6c55f5" }, + { 3074, "216ea26f02976a261b7d21a4dd3085157bedfabd" }, + { 3075, "bd612ebba021fd8e012b14c3bd60c8c5161fabc0" }, + { 4048, "c2564c1fdf2d5e9d7dde7aace2643428e90662e8" }, + { 4052, "91ce61fe924b445dfe7b5a1dcd10a27caec16df6" }, + { 4058, "db2a9be5ee8124f091c7ebd699266c5de223c164" }, + { 6144, "855109903feae2ba3a7a05a326b8a171116eb368" }, + { 6150, "37520bb3a668294d9c7b073e7e3daf8fee248a78" }, + { 6400, "60a353c841b6d2b1a05890349dad2fa33c7536b7" }, + { 6528, "9e53a43a69bb42d7c8522ca8bd632e421d5edb36" }, + { 8192, "a918cb0da862eaea0a33ee0efea50243e6b4927c" }, + { 8320, "29a5dcf55d1db29cd113fcf0572ae414f1c71329" }, + {16384, "6fb27966138e0c8d5a0d65ace817ebd53633cee1" }, + {18432, "ca09900d891c7c9ae2a559b10f63a217003341c1" }, + { 0, NULL }, +}; + +/* Key = 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, 0x08, + * 0x09, 0x0a, 0x0b, 0x0c, 0x0d, 0x0e, 0x0f, 0x10 + * 0x11, 0x12, 0x13, 0x14 + * InputHexStr = "31323334353637383930" (ASCII = "1234567890") + */ +static MV_CESA_SIZE_TEST shaMultiSizeTest404[] = +{ + { 80, "beaf20a34b06a87558d156c0949bc3957d40222e" }, + { 512, "3353955358d886bc2940a3c7f337ff7dafb59c7b" }, + { 1000, "8737a542c5e9b2b6244b757ebb69d5bd602a829f" }, + { 1001, "fd9e7582d8a5d3c9fe3b923e4e6a41b07a1eb4d4" }, + { 1002, "a146d14a6fc3c274ff600568f4d75b977989e00d" }, + { 1003, "be22601bbc027ddef2dec97d30b3dc424fd803c5" }, + { 1004, "3e71fe99b2fe2b7bfdf4dbf0c7f3da25d7ea35e7" }, + { 1005, "2c422735d7295408fddd76f5e8a83a2a8da13df3" }, + { 1006, "6d875319049314b61855101a647b9ba3313428e6" }, + { 1336, "c1631ea80bad9dc43a180712461b65a0598c711c" }, + { 1344, "816069bf91d34581005746e2e0283d0f9c7b7605" }, + { 1399, "4e139866dc61cfcb8b67ca2ebd637b3a538593af" }, + { 1400, "ff2a0f8dd2b02c5417910f6f55d33a78e081a723" }, + { 1401, "ab00c12be62336964cbce31ae97fe2a0002984d5" }, + { 1402, "61349e7f999f3a1acc56c3e9a5060a9c4a7b05b6" }, + { 1403, "3edbc0f61e435bc1317fa27d840076093fb79353" }, + { 1404, "d052c6dfdbe63d45dab23ef9893e2aa4636aca1e" }, + { 1405, "0cc16b7388d67bf0add15a31e6e6c753cfae4987" }, + { 1406, "c96ba7eaad74253c38c22101b558d2850b1d1b90" }, + { 1407, "3445428a40d2c6556e7c55797ad8d323b61a48d9" }, + { 1408, "8d6444f937a09317c89834187b8ea9b8d3a8c56b" }, + { 1409, "c700acd3ecd19014ea2bdb4d42510c467e088475" }, + { 2048, "ee27d2a0cb77470c2f496212dfd68b5bb7b04e4b" }, + { 2049, "683762d7a02983b26a6d046e6451d9cd82c25932" }, + { 2050, "0fd20f1d55a9ee18363c2a6fd54aa13aee69992f" }, + { 2051, "86c267d8cc4bc8d59090e4f8b303da960fd228b7" }, + { 2052, "452395ae05b3ec503eea34f86fc0832485ad97c1" }, + { 3072, "75198e3cfd0b9bcff2dabdf8e38e6fdaa33ca49a" }, + { 3074, "4e24785ef080141ce4aab4675986d9acea624d7c" }, + { 3075, "3a20c5978dd637ec0e809bf84f0d9ccf30bc65bf" }, + { 4048, "3c32da256be7a7554922bf5fed51b0d2d09e59ad" }, + { 4052, "fff898426ea16e54325ae391a32c6c9bce4c23c0" }, + { 4058, "c800b9e562e1c91e1310116341a3c91d37f848ec" }, + { 6144, "d91d509d0cc4376c2d05bf9a5097717a373530e6" }, + { 6150, "d957030e0f13c5df07d9eec298542d8f94a07f12" }, + { 6400, "bb745313c3d7dc17b3f955e5534ad500a1082613" }, + { 6528, "77905f80d9ca82080bbb3e5654896dabfcfd1bdb" }, + { 8192, "5237fd9a81830c974396f99f32047586612ff3c0" }, + { 8320, "57668e28d5f2dba0839518a11db0f6af3d7e08bf" }, + {16384, "62e093fde467f0748087beea32e9af97d5c61241" }, + {18432, "845fb33130c7d6ea554fd5aacb9c50cf7ccb5929" }, + { 0, NULL }, +}; + +/* HASH-SHA1 + * InputHexStr = "31323334353637383930" (ASCII = "1234567890") + * repeated "size" times + */ +static MV_CESA_SIZE_TEST shaMultiSizeTest405[] = +{ + { 80, "50abf5706a150990a08b2c5ea40fa0e585554732" }, + { 512, "f14516a08948fa27917a974d219741a697ba0087" }, + { 1000, "0bd18c378d5788817eb4f1e5dc07d867efa5cbf4" }, + { 1001, "ca29b85c35db1b8aef83c977893a11159d1b7aa2" }, + { 1002, "d83bc973eaaedb8a31437994dabbb3304b0be086" }, + { 1003, "2cf7bbef0acd6c00536b5c58ca470df9a3a90b6c" }, + { 1004, "e4375d09b1223385a8a393066f8209acfd936a80" }, + { 1005, "1029b38043e027745d019ce1d2d68e3d8b9d8f99" }, + { 1006, "deea16dcebbd8ac137e2b984deb639b9fb5e9680" }, + { 1336, "ea031b065fff63dcfb6a41956e4777520cdbc55d" }, + { 1344, "b52096c6445e6c0a8355995c70dc36ae186c863c" }, + { 1399, "cde2f6f8379870db4b32cf17471dc828a8dbff2b" }, + { 1400, "e53ff664064bc09fe5054c650806bd42d8179518" }, + { 1401, "d1156db5ddafcace64cdb510ff0d4af9b9a8ad64" }, + { 1402, "34ede0e9a909dd84a2ae291539105c0507b958e1" }, + { 1403, "a772ca3536da77e6ad3251e4f9e1234a4d7b87c0" }, + { 1404, "29740fd2b04e7a8bfd32242db6233156ad699948" }, + { 1405, "65b17397495b70ce4865dad93bf991b74c97cce1" }, + { 1406, "a7ee89cd0754061fdb91af7ea6abad2c69d542e3" }, + { 1407, "3eebf82f7420188e23d328b7ce93580b279a5715" }, + { 1408, "e08d3363a8b9a490dfb3a4c453452b8f114deeec" }, + { 1409, "95d74df739181a4ff30b8c39e28793a36598e924" }, + { 2048, "aa40262509c2abf84aab0197f83187fc90056d91" }, + { 2049, "7dec28ef105bc313bade8d9a7cdeac58b99de5ea" }, + { 2050, "d2e30f77ec81197de20f56588a156094ecb88450" }, + { 2051, "6b22ccc874833e96551a39da0c0edcaa0d969d92" }, + { 2052, "f843141e57875cd669af58744bc60aa9ea59549c" }, + { 3072, "09c5fedeaa62c132e673cc3c608a00142273d086" }, + { 3074, "b09e95eea9c7b1b007a58accec488301901a7f3d" }, + { 3075, "e6226b77b4ada287a8c9bbcf4ed71eec5ce632dc" }, + { 4048, "e99394894f855821951ddddf5bfc628547435f5c" }, + { 4052, "32d2f1af38be9cfba6cd03d55a254d0b3e1eb382" }, + { 4058, "d906552a4f2aca3a22e1fecccbcd183d7289d0ef" }, + { 6144, "2e7f62d35a860988e1224dc0543204af19316041" }, + { 6150, "d6b89698ee133df46fec9d552fadc328aa5a1b51" }, + { 6400, "dff50e90c46853988fa3a4b4ce5dda6945aae976" }, + { 6528, "9e63ec0430b96db02d38bc78357a2f63de2ab7f8" }, + { 8192, "971eb71ed60394d5ab5abb12e88420bdd41b5992" }, + { 8320, "91606a31b46afeaac965cecf87297e791b211013" }, + {16384, "547f830a5ec1f5f170ce818f156b1002cabc7569" }, + {18432, "f16f272787f3b8d539652e4dc315af6ab4fda0ef" }, + { 0, NULL }, +}; + +/* CryptoKey = 0x01234567, 0x89abcdef, + * 0x01234567, 0x89abcdef, + * 0x01234567, 0x89abcdef; + * MacKey = 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, 0x08, + * 0x09, 0x0a, 0x0b, 0x0c, 0x0d, 0x0e, 0x0f, 0x10 + * InputHexStr = "31323334353637383930" (ASCII = "1234567890") + * Note: only sizes aligned to 3DES block size (8 bytes) allowed + */ +static MV_CESA_SIZE_TEST tripleDesMdMultiSizeTest502[] = +{ + { 64, "9586962a2aaaef28803dec2e17807a7f" }, + { 80, "b7726a03aad490bd6c5a452a89a1b271" }, + { 352, "f1ed9563aecc3c0d2766eb2bed3b4e4c" }, + { 512, "0f9decb11ab40fe86f4d4d9397bc020e" }, + { 1000, "3ba69deac12cab8ff9dff7dbd9669927" }, + { 1336, "6cf47bf1e80e03e2c1d0945bc50d37d2" }, + { 1344, "4be388dab21ceb3fa1b8d302e9b821f7" }, + { 1400, "a58b79fb21dd9bfc6ec93e3b99fb0ef1" }, + { 1408, "8bc97379fc2ac3237effcdd4f7a86528" }, + { 2048, "1339f03ab3076f25a20bc4cba16eb5bf" }, + { 3072, "731204d2d90c4b36ae41f5e1fb874288" }, + { 4048, "c028d998cfda5642547b7e1ed5ea16e4" }, + { 6144, "b1b19cd910cc51bd22992f1e59f1e068" }, + { 6400, "44e4613496ba622deb0e7cb768135a2f" }, + { 6528, "3b06b0a86f8db9cd67f9448dfcf10549" }, + { 8192, "d581780b7163138a0f412be681457d82" }, + {16384, "03b8ac05527faaf1bed03df149c65ccf" }, + {18432, "677c8a86a41dab6c5d81b85b8fb10ff6" }, + { 0, NULL }, +}; + + +/* CryptoKey = 0x01234567, 0x89abcdef, + * 0x01234567, 0x89abcdef, + * 0x01234567, 0x89abcdef; + * MacKey = 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, 0x08, + * 0x09, 0x0a, 0x0b, 0x0c, 0x0d, 0x0e, 0x0f, 0x10 + * 0x11, 0x12, 0x13, 0x14 + * InputHexStr = "31323334353637383930" (ASCII = "1234567890") + * Note: only sizes aligned to 3DES block size (8 bytes) allowed + */ +static MV_CESA_SIZE_TEST tripleDesShaMultiSizeTest503[] = +{ + { 64, "44a1e9bcbfc1429630d9ea68b7a48b0427a684f2" }, + { 80, "b2ddeaca91030eab5b95a234ef2c0f6e738ff883" }, + { 352, "4b91864c7ff629bdff75d9726421f76705452aaf" }, + { 512, "6dd37faceeb2aa98ba74f4242ed6734a4d546af5" }, + { 1000, "463661c30300be512a9df40904f0757cde5f1141" }, + { 1336, "b931f831d9034fe59c65176400b039fe9c1f44a5" }, + { 1344, "af8866b1cd4a4887d6185bfe72470ffdfb3648e1" }, + { 1400, "49c6caf07296d5e31d2504d088bc5b20c3ee7cdb" }, + { 1408, "fcae8deedbc6ebf0763575dc7e9de075b448a0f4" }, + { 2048, "edece5012146c1faa0dd10f50b183ba5d2af58ac" }, + { 3072, "5b83625adb43a488b8d64fecf39bb766818547b7" }, + { 4048, "d2c533678d26c970293af60f14c8279dc708bfc9" }, + { 6144, "b8f67af4f991b08b725f969b049ebf813bfacc5c" }, + { 6400, "d9a6c7f746ac7a60ef2edbed2841cf851c25cfb0" }, + { 6528, "376792b8c8d18161d15579fb7829e6e3a27e9946" }, + { 8192, "d890eabdca195b34ef8724b28360cffa92ae5655" }, + {16384, "a167ee52639ec7bf19aee9c6e8f76667c14134b9" }, + {18432, "e4396ab56f67296b220985a12078f4a0e365d2cc" }, + { 0, NULL }, +}; + +/* CryptoKey = 0x01234567, 0x89abcdef, + * 0x01234567, 0x89abcdef, + * 0x01234567, 0x89abcdef + * IV = 0x12345678, 0x90abcdef + * MacKey = 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, 0x08, + * 0x09, 0x0a, 0x0b, 0x0c, 0x0d, 0x0e, 0x0f, 0x10 + * InputHexStr = "31323334353637383930" (ASCII = "1234567890") + * Note: only sizes aligned to 3DES block size (8 bytes) allowed + */ +static MV_CESA_SIZE_TEST cbc3desMdMultiSizeTest504[] = +{ + { 64, "8d10e00802460ede0058c139ba48bd2d" }, + { 80, "6f463057e1a90e0e91ae505b527bcec0" }, + { 352, "4938d48bdf86aece2c6851e7c6079788" }, + { 512, "516705d59f3cf810ebf2a13a23a7d42e" }, + { 1000, "a5a000ee5c830e67ddc6a2d2e5644b31" }, + { 1336, "44af60087b74ed07950088efbe3b126a" }, + { 1344, "1f5b39e0577920af731dabbfcf6dfc2a" }, + { 1400, "6804ea640e29b9cd39e08bc37dbce734" }, + { 1408, "4fb436624b02516fc9d1535466574bf9" }, + { 2048, "c909b0985c423d8d86719f701e9e83db" }, + { 3072, "cfe0bc34ef97213ee3d3f8b10122db21" }, + { 4048, "03ea10b5ae4ddeb20aed6af373082ed1" }, + { 6144, "b9a0ff4f87fc14b3c2dc6f0ed0998fdf" }, + { 6400, "6995f85d9d4985dd99e974ec7dda9dd6" }, + { 6528, "bbbb548ce2fa3d58467f6a6a5168a0e6" }, + { 8192, "afe101fbe745bb449ae4f50d10801456" }, + {16384, "9741706d0b1c923340c4660ff97cacdf" }, + {18432, "b0217becb73cb8f61fd79c7ce9d023fb" }, + { 0, NULL }, +}; + + +/* CryptoKey = 0x01234567, 0x89abcdef, + * 0x01234567, 0x89abcdef, + * 0x01234567, 0x89abcdef; + * IV = 0x12345678, 0x90abcdef + * MacKey = 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, 0x08, + * 0x09, 0x0a, 0x0b, 0x0c, 0x0d, 0x0e, 0x0f, 0x10 + * 0x11, 0x12, 0x13, 0x14 + * InputHexStr = "31323334353637383930" (ASCII = "1234567890") + * Note: only sizes aligned to 3DES block size (8 bytes) allowed + */ +static MV_CESA_SIZE_TEST cbc3desShaMultiSizeTest505[] = +{ + { 64, "409187e5bdb0be4a7754ca3747f7433dc4f01b98" }, + { 80, "1b002ed050be743aa98860cf35659646bb8efcc0" }, + { 352, "6cbf7ebe50fa4fa6eecc19eca23f9eae553ccfff" }, + { 512, "cfb5253fb4bf72b743320c30c7e48c54965853b0" }, + { 1000, "95e04e1ca2937e7c5a9aba9e42d2bcdb8a7af21f" }, + { 1336, "3b5c1f5eee5837ebf67b83ae01405542d77a6627" }, + { 1344, "2b3d42ab25615437f98a1ee310b81d07a02badc2" }, + { 1400, "7f8687df7c1af44e4baf3c934b6cca5ab6bc993e" }, + { 1408, "473a581c5f04f7527d50793c845471ac87e86430" }, + { 2048, "e41d20cae7ebe34e6e828ed62b1e5734019037bb" }, + { 3072, "275664afd7a561d804e6b0d204e53939cde653ae" }, + { 4048, "0d220cc5b34aeeb46bbbd637dde6290b5a8285a3" }, + { 6144, "cb393ddcc8b1c206060625b7d822ef9839e67bc5" }, + { 6400, "dd3317e2a627fc04800f74a4b05bfda00fab0347" }, + { 6528, "8a74c3b2441ab3f5a7e08895cc432566219a7c41" }, + { 8192, "b8e6ef3a549ed0e005bd5b8b1a5fe6689e9711a7" }, + {16384, "55f59404008276cdac0e2ba0d193af2d40eac5ce" }, + {18432, "86ae6c4fc72369a54cce39938e2d0296cd9c6ec5" }, + { 0, NULL }, +}; + + +/* CryptoKey = 0x01234567, 0x89abcdef, + * 0x01234567, 0x89abcdef, + * 0x01234567, 0x89abcdef + * IV = 0x12345678, 0x90abcdef + * MacKey = 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, 0x08, + * 0x09, 0x0a, 0x0b, 0x0c, 0x0d, 0x0e, 0x0f, 0x10 + * InputHexStr = "31323334353637383930" (ASCII = "1234567890") + * Note: only sizes aligned to AES block size (16 bytes) allowed + */ +static MV_CESA_SIZE_TEST cbcAes128md5multiSizeTest506[] = +{ + { 16, "7ca4c2ba866751598720c5c4aa0d6786" }, + { 64, "7dba7fb988e80da609b1fea7254bced8" }, + { 80, "6b6e863ac5a71d15e3e9b1c86c9ba05f" }, + { 352, "a1ceb9c2e3021002400d525187a9f38c" }, + { 512, "596c055c1c55db748379223164075641" }, + { 1008, "f920989c02f3b3603f53c99d89492377" }, + { 1344, "2e496b73759d77ed32ea222dbd2e7b41" }, + { 1408, "7178c046b3a8d772efdb6a71c4991ea4" }, + { 2048, "a917f0099c69eb94079a8421714b6aad" }, + { 3072, "693cd5033d7f5391d3c958519fa9e934" }, + { 4048, "139dca91bcff65b3c40771749052906b" }, + { 6144, "428d9cef6df4fb70a6e9b6bbe4819e55" }, + { 6400, "9c0b909e76daa811e12b1fc17000a0c4" }, + { 6528, "ad876f6297186a7be1f1b907ed860eda" }, + { 8192, "479cbbaca37dd3191ea1f3e8134a0ef4" }, + {16384, "60fda559c74f91df538100c9842f2f15" }, + {18432, "4a3eb1cba1fa45f3981270953f720c42" }, + { 0, NULL }, +}; + + +/* CryptoKey = 0x01234567, 0x89abcdef, + * 0x01234567, 0x89abcdef, + * 0x01234567, 0x89abcdef; + * IV = 0x12345678, 0x90abcdef + * MacKey = 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, 0x08, + * 0x09, 0x0a, 0x0b, 0x0c, 0x0d, 0x0e, 0x0f, 0x10 + * 0x11, 0x12, 0x13, 0x14 + * InputHexStr = "31323334353637383930" (ASCII = "1234567890") + * Note: only sizes aligned to AES block size (16 bytes) allowed + */ +static MV_CESA_SIZE_TEST cbcAes128sha1multiSizeTest507[] = +{ + { 16, "9aa8dc1c45f0946daf78057fa978759c625c1fee" }, + { 64, "9f588fc1ede851e5f8b20256abc9979465ae2189" }, + { 80, "13558472d1fc1c90dffec6e5136c7203452d509b" }, + { 352, "6b93518e006cfaa1f7adb24615e7291fb0a27e06" }, + { 512, "096874951a77fbbf333e49d80c096ee2016e09bd" }, + { 1008, "696fc203c2e4b5ae0ec5d1db3f623c490bc6dbac" }, + { 1344, "79bf77509935ccd3528caaac6a5eb6481f74029b" }, + { 1408, "627f9462b95fc188e8cfa7eec15119bdc5d4fcf1" }, + { 2048, "3d50d0c005feba92fe41502d609fced9c882b4d1" }, + { 3072, "758807e5b983e3a91c06fb218fe0f73f77111e94" }, + { 4048, "ca90e85242e33f005da3504416a52098d0d31fb2" }, + { 6144, "8044c1d4fd06642dfc46990b4f18b61ef1e972cf" }, + { 6400, "166f1f4ea57409f04feba9fb1e39af0e00bd6f43" }, + { 6528, "0389016a39485d6e330f8b4215ddf718b404f7e9" }, + { 8192, "6df7ee2a8b61d6f7f860ce8dbf778f0c2a5b508b" }, + {16384, "a70a6d8dfa1f91ded621c3dbaed34162bc48783f" }, + {18432, "8dfad627922ce15df1eed10bdbed49244efa57db" }, + { 0, NULL }, +}; + + +void cesaTestPrintStatus(void); + + +/*------------------------- LOCAL FUNCTIONs ---------------------------------*/ +MV_STATUS testCmd(int sid, int iter, MV_CESA_COMMAND* pCmd, + MV_CESA_TEST_SESSION* pTestSession, MV_U8* pIV, int ivSize); +MV_STATUS testClose(int idx); +MV_STATUS testOpen(int idx); +void close_session(int sid); +void cesaTestCheckReady(const MV_CESA_RESULT *r); +void cesaCheckReady(MV_CESA_RESULT* r); +void printTestResults(int idx, MV_STATUS status, int checkMode); +void cesaLastResult(void); +void cesaTestPrintReq(int req, int offset, int size); + +void cesaTestPrintStatus(void); +void cesaTestPrintSession(int idx); +void sizeTest(int testIdx, int iter, int checkMode); +void multiTest(int iter, int reqSize, int checkMode); +void oneTest(int testIdx, int caseIdx,int iter, int reqSize, int checkMode); +void multiSizeTest(int idx, int iter, int checkMode, char* inputData); +void cesaTest(int iter, int reqSize, int checkMode); +void cesaOneTest(int testIdx, int caseIdx,int iter, int reqSize, int checkMode); +void combiTest(int iter, int reqSize, int checkMode); +void shaTest(int iter, int reqSize, int checkMode); +void mdTest(int iter, int reqSize, int checkMode); +void aesTest(int iter, int reqSize, int checkMode); +void tripleDesTest(int iter, int reqSize, int checkMode); +void desTest(int iter, int reqSize, int checkMode); +void cesaTestStop(void); +MV_STATUS testRun(int idx, int caseIdx, int iter,int reqSize, int checkMode); +void cesaTestStart(int bufNum, int bufSize); + + +static MV_U32 getRate(MV_U32* remainder) +{ + MV_U32 kBits, milliSec, rate; + + milliSec = 0; + if( (cesaEndTicks - cesaBeginTicks) > 0) + { + milliSec = CESA_TEST_TICK_TO_MS(cesaEndTicks - cesaBeginTicks); + } + if(milliSec == 0) + { + if(remainder != NULL) + *remainder = 0; + return 0; + } + + kBits = (cesaIteration*cesaRateSize*8)/1000; + rate = kBits/milliSec; + if(remainder != NULL) + *remainder = ((kBits % milliSec)*10)/milliSec; + + return rate; +} + +static char* extractMbuf(MV_CESA_MBUF *pMbuf, + int offset, int size, char* hexStr) +{ + mvCesaCopyFromMbuf((MV_U8*)cesaBinBuffer, pMbuf, offset, size); + mvBinToHex((const MV_U8*)cesaBinBuffer, hexStr, size); + + return hexStr; +} + +static MV_BOOL cesaCheckMbuf(MV_CESA_MBUF *pMbuf, + const char* hexString, int offset, + int checkSize) +{ + MV_BOOL isFailed = MV_FALSE; + MV_STATUS status; + int size = strlen(hexString)/2; + int checkedSize = 0; +/* + mvOsPrintf("cesaCheckMbuf: pMbuf=%p, offset=%d, checkSize=%d, mBufSize=%d\n", + pMbuf, offset, checkSize, pMbuf->mbufSize); +*/ + if(pMbuf->mbufSize < (checkSize + offset)) + { + mvOsPrintf("checkSize (%d) is too large: offset=%d, mbufSize=%d\n", + checkSize, offset, pMbuf->mbufSize); + return MV_TRUE; + } + status = mvCesaCopyFromMbuf((MV_U8*)cesaBinBuffer, pMbuf, offset, checkSize); + if(status != MV_OK) + { + mvOsPrintf("CesaTest: Can't copy %d bytes from Mbuf=%p to checkBuf=%p\n", + checkSize, pMbuf, cesaBinBuffer); + return MV_TRUE; + } +/* + mvDebugMemDump(cesaBinBuffer, size, 1); +*/ + mvHexToBin(hexString, (MV_U8*)cesaExpBinBuffer, size); + + /* Compare buffers */ + while(checkSize > checkedSize) + { + size = MV_MIN(size, (checkSize - checkedSize)); + if(memcmp(cesaExpBinBuffer, &cesaBinBuffer[checkedSize], size) != 0) + { + mvOsPrintf("CheckMbuf failed: checkSize=%d, size=%d, checkedSize=%d\n", + checkSize, size, checkedSize); + mvDebugMemDump(&cesaBinBuffer[checkedSize], size, 1); + mvDebugMemDump(cesaExpBinBuffer, size, 1); + + isFailed = MV_TRUE; + break; + } + checkedSize += size; + } + + return isFailed; +} + +static MV_STATUS cesaSetMbuf(MV_CESA_MBUF *pMbuf, + const char* hexString, + int offset, int reqSize) +{ + MV_STATUS status = MV_OK; + int copySize, size = strlen(hexString)/2; + + mvHexToBin(hexString, (MV_U8*)cesaBinBuffer, size); + + copySize = 0; + while(reqSize > copySize) + { + size = MV_MIN(size, (reqSize - copySize)); + + status = mvCesaCopyToMbuf((MV_U8*)cesaBinBuffer, pMbuf, offset+copySize, size); + if(status != MV_OK) + { + mvOsPrintf("cesaSetMbuf Error: Copy %d of %d bytes to MBuf\n", + copySize, reqSize); + break; + } + copySize += size; + } + pMbuf->mbufSize = offset+copySize; + return status; +} + +static MV_CESA_TEST_SESSION* getTestSessionDb(int idx, int* pTestIdx) +{ + int testIdx, dbIdx = idx/100; + + if(dbIdx > MAX_TEST_TYPE) + { + mvOsPrintf("Wrong index %d - No such test type\n", idx); + return NULL; + } + testIdx = idx % 100; + + if(testIdx >= cesaTestsDB[dbIdx].numSessions) + { + mvOsPrintf("Wrong index %d - No such test\n", idx); + return NULL; + } + if(pTestIdx != NULL) + *pTestIdx = testIdx; + + return cesaTestsDB[dbIdx].pSessions; +} + +/* Debug */ +void cesaTestPrintReq(int req, int offset, int size) +{ + MV_CESA_MBUF* pMbuf; + + mvOsPrintf("cesaTestPrintReq: req=%d, offset=%d, size=%d\n", + req, offset, size); + mvDebugMemDump(cesaCmdRing, 128, 4); + + pMbuf = cesaCmdRing[req].pSrc; + mvCesaDebugMbuf("src", pMbuf, offset,size); + pMbuf = cesaCmdRing[req].pDst; + mvCesaDebugMbuf("dst", pMbuf, offset, size); + + cesaTestPrintStatus(); +} + +void cesaLastResult(void) +{ + mvOsPrintf("Last Result: ReqId = %d, SessionId = %d, rc = (%d)\n", + (MV_U32)cesaResult.pReqPrv, cesaResult.sessionId, + cesaResult.retCode); +} + +void printTestResults(int idx, MV_STATUS status, int checkMode) +{ + int testIdx; + MV_CESA_TEST_SESSION* pTestSessions = getTestSessionDb(idx, &testIdx); + + if(pTestSessions == NULL) + return; + + mvOsPrintf("%-35s %4dx%-4d : ", pTestSessions[testIdx].name, + cesaIteration, cesaReqSize); + if( (status == MV_OK) && + (cesaCryptoError == 0) && + (cesaError == 0) && + (cesaReqIdError == 0) ) + { + mvOsPrintf("Passed, Rate=%3u.%u Mbps (%5u cpp)\n", + cesaRate, cesaRateAfterDot, cesaEndTicks - cesaBeginTicks); + } + else + { + mvOsPrintf("Failed, Status = 0x%x\n", status); + if(cesaCryptoError > 0) + mvOsPrintf("cryptoError : %d\n", cesaCryptoError); + if(cesaReqIdError > 0) + mvOsPrintf("reqIdError : %d\n", cesaReqIdError); + if(cesaError > 0) + mvOsPrintf("cesaError : %d\n", cesaError); + } + if(cesaTestIsrMissCount > 0) + mvOsPrintf("cesaIsrMissed : %d\n", cesaTestIsrMissCount); +} + +void cesaCheckReady(MV_CESA_RESULT* r) +{ + int reqId; + MV_CESA_MBUF *pMbuf; + MV_BOOL isFailed; + + cesaResult = *r; + reqId = (int)cesaResult.pReqPrv; + pMbuf = cesaCmdRing[reqId].pDst; + +/* + mvOsPrintf("cesaCheckReady: reqId=%d, checkOffset=%d, checkSize=%d\n", + reqId, cesaCheckOffset, cesaCheckSize); +*/ + /* Check expected reqId */ + if(reqId != cesaExpReqId) + { + cesaReqIdError++; +/* + mvOsPrintf("CESA reqId Error: cbIter=%d (%d), reqId=%d, expReqId=%d\n", + cesaCbIter, cesaIteration, reqId, cesaExpReqId); +*/ + } + else + { + if( (cesaCheckMode == CESA_FULL_CHECK_MODE) || + (cesaCheckMode == CESA_FAST_CHECK_MODE) ) + { + if(cesaResult.retCode != MV_OK) + { + cesaError++; + + mvOsPrintf("CESA Error: cbIter=%d (%d), reqId=%d, rc=%d\n", + cesaCbIter, cesaIteration, reqId, cesaResult.retCode); + } + else + { + if( (cesaCheckSize > 0) && (cesaOutputHexStr != NULL) ) + { + /* Check expected output */ + + isFailed = cesaCheckMbuf(pMbuf, cesaOutputHexStr, cesaCheckOffset, cesaCheckSize); + if(isFailed) + { + mvOsPrintf("CESA Crypto Error: cbIter=%d (%d), reqId=%d\n", + cesaCbIter, cesaIteration, reqId); + + CESA_TEST_DEBUG_PRINT(("Error: reqId=%d, reqSize=%d, checkOffset=%d, checkSize=%d\n", + reqId, cesaReqSize, cesaCheckOffset, cesaCheckSize)); + + CESA_TEST_DEBUG_PRINT(("Output str: %s\n", cesaOutputHexStr)); + + CESA_TEST_DEBUG_CODE( mvCesaDebugMbuf("error", pMbuf, 0, cesaCheckOffset+cesaCheckSize) ); + + cesaCryptoError++; + } + } + } + } + } + if(cesaCheckMode == CESA_SHOW_CHECK_MODE) + { + extractMbuf(pMbuf, cesaCheckOffset, cesaCheckSize, cesaHexBuffer); + mvOsPrintf("%4d, %s\n", cesaCheckOffset, cesaHexBuffer); + } + + cesaCbIter++; + if(cesaCbIter >= cesaIteration) + { + cesaCbIter = 0; + cesaExpReqId = 0; + cesaIsReady = MV_TRUE; + + cesaEndTicks = CESA_TEST_TICK_GET(); + cesaRate = getRate(&cesaRateAfterDot); + } + else + { + cesaExpReqId = reqId + 1; + if(cesaExpReqId == CESA_DEF_REQ_SIZE) + cesaExpReqId = 0; + } +} + + +#ifdef MV_NETBSD +static int cesaTestReadyIsr(void *arg) +#else +#ifdef __KERNEL__ +static irqreturn_t cesaTestReadyIsr( int irq , void *dev_id) +#endif +#ifdef MV_VXWORKS +void cesaTestReadyIsr(void) +#endif +#endif +{ + MV_U32 cause; + MV_STATUS status; + MV_CESA_RESULT result; + + cesaTestIsrCount++; + /* Clear cause register */ + cause = MV_REG_READ(MV_CESA_ISR_CAUSE_REG); + if( (cause & MV_CESA_CAUSE_ACC_DMA_ALL_MASK) == 0) + { + mvOsPrintf("cesaTestReadyIsr: cause=0x%x\n", cause); +#ifdef MV_NETBSD + return 0; +#else +#ifdef __KERNEL__ + return 1; +#else + return; +#endif +#endif + } + + MV_REG_WRITE(MV_CESA_ISR_CAUSE_REG, 0); + + while(MV_TRUE) + { + /* Get Ready requests */ + status = mvCesaReadyGet(&result); + if(status == MV_OK) + cesaCheckReady(&result); + + break; + } + if( (cesaTestFull == 1) && (status != MV_BUSY) ) + { + cesaTestFull = 0; + CESA_TEST_WAKE_UP(); + } + +#ifdef __KERNEL__ + return 1; +#endif +} + +void +cesaTestCheckReady(const MV_CESA_RESULT *r) +{ + MV_CESA_RESULT result = *r; + + cesaCheckReady(&result); + + if (cesaTestFull == 1) { + cesaTestFull = 0; + CESA_TEST_WAKE_UP(); + } +} + +static INLINE int open_session(MV_CESA_OPEN_SESSION* pOs) +{ + MV_U16 sid; + MV_STATUS status; + + status = mvCesaSessionOpen(pOs, (short*)&sid); + if(status != MV_OK) + { + mvOsPrintf("CesaTest: Can't open new session - status = 0x%x\n", + status); + return -1; + } + + return (int)sid; +} + +void close_session(int sid) +{ + MV_STATUS status; + + status = mvCesaSessionClose(sid); + if(status != MV_OK) + { + mvOsPrintf("CesaTest: Can't close session %d - status = 0x%x\n", + sid, status); + } +} + +MV_STATUS testOpen(int idx) +{ + MV_CESA_OPEN_SESSION os; + int sid, i, testIdx; + MV_CESA_TEST_SESSION* pTestSession; + MV_U16 digestSize = 0; + + pTestSession = getTestSessionDb(idx, &testIdx); + if(pTestSession == NULL) + { + mvOsPrintf("Test %d is not exist\n", idx); + return MV_BAD_PARAM; + } + pTestSession = &pTestSession[testIdx]; + + if(pTestSession->sid != -1) + { + mvOsPrintf("Session for test %d already created: sid=%d\n", + idx, pTestSession->sid); + return MV_OK; + } + + os.cryptoAlgorithm = pTestSession->cryptoAlgorithm; + os.macMode = pTestSession->macAlgorithm; + switch(os.macMode) + { + case MV_CESA_MAC_MD5: + case MV_CESA_MAC_HMAC_MD5: + digestSize = MV_CESA_MD5_DIGEST_SIZE; + break; + + case MV_CESA_MAC_SHA1: + case MV_CESA_MAC_HMAC_SHA1: + digestSize = MV_CESA_SHA1_DIGEST_SIZE; + break; + + case MV_CESA_MAC_NULL: + digestSize = 0; + } + os.cryptoMode = pTestSession->cryptoMode; + os.direction = pTestSession->direction; + os.operation = pTestSession->operation; + + for(i=0; icryptoKeySize; i++) + os.cryptoKey[i] = pTestSession->pCryptoKey[i]; + + os.cryptoKeyLength = pTestSession->cryptoKeySize; + + for(i=0; imacKeySize; i++) + os.macKey[i] = pTestSession->pMacKey[i]; + + os.macKeyLength = pTestSession->macKeySize; + os.digestSize = digestSize; + + sid = open_session(&os); + if(sid == -1) + { + mvOsPrintf("Can't open session for test %d: rc=0x%x\n", + idx, cesaResult.retCode); + return cesaResult.retCode; + } + CESA_TEST_DEBUG_PRINT(("Opened session: sid = %d\n", sid)); + pTestSession->sid = sid; + return MV_OK; +} + +MV_STATUS testClose(int idx) +{ + int testIdx; + MV_CESA_TEST_SESSION* pTestSession; + + pTestSession = getTestSessionDb(idx, &testIdx); + if(pTestSession == NULL) + { + mvOsPrintf("Test %d is not exist\n", idx); + return MV_BAD_PARAM; + } + pTestSession = &pTestSession[testIdx]; + + if(pTestSession->sid == -1) + { + mvOsPrintf("Test session %d is not opened\n", idx); + return MV_NO_SUCH; + } + + close_session(pTestSession->sid); + pTestSession->sid = -1; + + return MV_OK; +} + +MV_STATUS testCmd(int sid, int iter, MV_CESA_COMMAND* pCmd, + MV_CESA_TEST_SESSION* pTestSession, MV_U8* pIV, int ivSize) +{ + int cmdReqId = 0; + int i; + MV_STATUS rc = MV_OK; + char ivZeroHex[] = "0000"; + + if(iter == 0) + iter = CESA_DEF_ITER_NUM; + + if(pCmd == NULL) + { + mvOsPrintf("testCmd failed: pCmd=NULL\n"); + return MV_BAD_PARAM; + } + pCmd->sessionId = sid; + + cesaCryptoError = 0; + cesaReqIdError = 0; + cesaError = 0; + cesaTestIsrMissCount = 0; + cesaIsReady = MV_FALSE; + cesaIteration = iter; + + if(cesaInputHexStr == NULL) + cesaInputHexStr = cesaPlainHexEbc; + + for(i=0; ipSrc = (MV_CESA_MBUF*)(cesaCmdRing[i].pSrc); + if(pIV != NULL) + { + /* If IV from SA - set IV in Source buffer to zeros */ + cesaSetMbuf(pCmd->pSrc, ivZeroHex, 0, pCmd->cryptoOffset); + cesaSetMbuf(pCmd->pSrc, cesaInputHexStr, pCmd->cryptoOffset, + (cesaReqSize - pCmd->cryptoOffset)); + } + else + { + cesaSetMbuf(pCmd->pSrc, cesaInputHexStr, 0, cesaReqSize); + } + pCmd->pDst = (MV_CESA_MBUF*)(cesaCmdRing[i].pDst); + cesaSetMbuf(pCmd->pDst, cesaNullPlainHexText, 0, cesaReqSize); + + memcpy(&cesaCmdRing[i], pCmd, sizeof(*pCmd)); + } + + if(cesaCheckMode == CESA_SW_SHOW_CHECK_MODE) + { + MV_U8 pDigest[MV_CESA_MAX_DIGEST_SIZE]; + + if(pTestSession->macAlgorithm == MV_CESA_MAC_MD5) + { + mvMD5(pCmd->pSrc->pFrags[0].bufVirtPtr, pCmd->macLength, pDigest); + mvOsPrintf("SW HASH_MD5: reqSize=%d, macLength=%d\n", + cesaReqSize, pCmd->macLength); + mvDebugMemDump(pDigest, MV_CESA_MD5_DIGEST_SIZE, 1); + return MV_OK; + } + if(pTestSession->macAlgorithm == MV_CESA_MAC_SHA1) + { + mvSHA1(pCmd->pSrc->pFrags[0].bufVirtPtr, pCmd->macLength, pDigest); + mvOsPrintf("SW HASH_SHA1: reqSize=%d, macLength=%d\n", + cesaReqSize, pCmd->macLength); + mvDebugMemDump(pDigest, MV_CESA_SHA1_DIGEST_SIZE, 1); + return MV_OK; + } + } + + cesaBeginTicks = CESA_TEST_TICK_GET(); + CESA_TEST_DEBUG_CODE( memset(cesaTestTrace, 0, sizeof(cesaTestTrace)); + cesaTestTraceIdx = 0; + ); + + if(cesaCheckMode == CESA_SW_NULL_CHECK_MODE) + { + volatile MV_U8 pDigest[MV_CESA_MAX_DIGEST_SIZE]; + + for(i=0; imacAlgorithm == MV_CESA_MAC_MD5) + { + mvMD5(pCmd->pSrc->pFrags[0].bufVirtPtr, pCmd->macLength, (unsigned char*)pDigest); + } + if(pTestSession->macAlgorithm == MV_CESA_MAC_SHA1) + { + mvSHA1(pCmd->pSrc->pFrags[0].bufVirtPtr, pCmd->macLength, (MV_U8 *)pDigest); + } + } + cesaEndTicks = CESA_TEST_TICK_GET(); + cesaRate = getRate(&cesaRateAfterDot); + cesaIsReady = MV_TRUE; + + return MV_OK; + } + + /*cesaTestIsrCount = 0;*/ + /*mvCesaDebugStatsClear();*/ + +#ifndef MV_NETBSD + MV_REG_WRITE(MV_CESA_ISR_CAUSE_REG, 0); +#endif + + for(i=0; ipReqPrv = (void*)cmdReqId; + + CESA_TEST_LOCK(flags); + + rc = mvCesaAction(pCmd); + if(rc == MV_NO_RESOURCE) + cesaTestFull = 1; + + CESA_TEST_UNLOCK(flags); + + if(rc == MV_NO_RESOURCE) + { + CESA_TEST_LOCK(flags); + CESA_TEST_WAIT( (cesaTestFull == 0), 100); + CESA_TEST_UNLOCK(flags); + if(cesaTestFull == 1) + { + mvOsPrintf("CESA Test timeout: i=%d, iter=%d, cesaTestFull=%d\n", + i, iter, cesaTestFull); + cesaTestFull = 0; + return MV_TIMEOUT; + } + + CESA_TEST_LOCK(flags); + + rc = mvCesaAction(pCmd); + + CESA_TEST_UNLOCK(flags); + } + if( (rc != MV_OK) && (rc != MV_NO_MORE) ) + { + mvOsPrintf("mvCesaAction failed: rc=%d\n", rc); + return rc; + } + + cmdReqId++; + if(cmdReqId >= CESA_DEF_REQ_SIZE) + cmdReqId = 0; + +#ifdef MV_LINUX + /* Reschedule each 16 requests */ + if( (i & 0xF) == 0) + schedule(); +#endif + } + return MV_OK; +} + +void cesaTestStart(int bufNum, int bufSize) +{ + int i, j, idx; + MV_CESA_MBUF *pMbufSrc, *pMbufDst; + MV_BUF_INFO *pFragsSrc, *pFragsDst; + char *pBuf; +#ifndef MV_NETBSD + int numOfSessions, queueDepth; + char *pSram; + MV_STATUS status; + MV_CPU_DEC_WIN addrDecWin; +#endif + + cesaCmdRing = mvOsMalloc(sizeof(MV_CESA_COMMAND) * CESA_DEF_REQ_SIZE); + if(cesaCmdRing == NULL) + { + mvOsPrintf("testStart: Can't allocate %ld bytes of memory\n", + sizeof(MV_CESA_COMMAND) * CESA_DEF_REQ_SIZE); + return; + } + memset(cesaCmdRing, 0, sizeof(MV_CESA_COMMAND) * CESA_DEF_REQ_SIZE); + + if(bufNum == 0) + bufNum = CESA_DEF_BUF_NUM; + + if(bufSize == 0) + bufSize = CESA_DEF_BUF_SIZE; + + cesaBufNum = bufNum; + cesaBufSize = bufSize; + mvOsPrintf("CESA test started: bufNum = %d, bufSize = %d\n", + bufNum, bufSize); + + cesaHexBuffer = mvOsMalloc(2*bufNum*bufSize); + if(cesaHexBuffer == NULL) + { + mvOsPrintf("testStart: Can't malloc %d bytes for cesaHexBuffer.\n", + 2*bufNum*bufSize); + return; + } + memset(cesaHexBuffer, 0, (2*bufNum*bufSize)); + + cesaBinBuffer = mvOsMalloc(bufNum*bufSize); + if(cesaBinBuffer == NULL) + { + mvOsPrintf("testStart: Can't malloc %d bytes for cesaBinBuffer\n", + bufNum*bufSize); + return; + } + memset(cesaBinBuffer, 0, (bufNum*bufSize)); + + cesaExpBinBuffer = mvOsMalloc(bufNum*bufSize); + if(cesaExpBinBuffer == NULL) + { + mvOsPrintf("testStart: Can't malloc %d bytes for cesaExpBinBuffer\n", + bufNum*bufSize); + return; + } + memset(cesaExpBinBuffer, 0, (bufNum*bufSize)); + + CESA_TEST_WAIT_INIT(); + + pMbufSrc = mvOsMalloc(sizeof(MV_CESA_MBUF) * CESA_DEF_REQ_SIZE); + pFragsSrc = mvOsMalloc(sizeof(MV_BUF_INFO) * bufNum * CESA_DEF_REQ_SIZE); + + pMbufDst = mvOsMalloc(sizeof(MV_CESA_MBUF) * CESA_DEF_REQ_SIZE); + pFragsDst = mvOsMalloc(sizeof(MV_BUF_INFO) * bufNum * CESA_DEF_REQ_SIZE); + + if( (pMbufSrc == NULL) || (pFragsSrc == NULL) || + (pMbufDst == NULL) || (pFragsDst == NULL) ) + { + mvOsPrintf("testStart: Can't malloc Src and Dst pMbuf and pFrags structures.\n"); + /* !!!! Dima cesaTestCleanup();*/ + return; + } + + memset(pMbufSrc, 0, sizeof(MV_CESA_MBUF) * CESA_DEF_REQ_SIZE); + memset(pFragsSrc, 0, sizeof(MV_BUF_INFO) * bufNum * CESA_DEF_REQ_SIZE); + + memset(pMbufDst, 0, sizeof(MV_CESA_MBUF) * CESA_DEF_REQ_SIZE); + memset(pFragsDst, 0, sizeof(MV_BUF_INFO) * bufNum * CESA_DEF_REQ_SIZE); + + mvOsPrintf("Cesa Test Start: pMbufSrc=%p, pFragsSrc=%p, pMbufDst=%p, pFragsDst=%p\n", + pMbufSrc, pFragsSrc, pMbufDst, pFragsDst); + + idx = 0; + for(i=0; ipFrags = &pFragsSrc[idx]; + cesaCmdRing[i].pSrc->numFrags = bufNum; + cesaCmdRing[i].pSrc->mbufSize = 0; + + cesaCmdRing[i].pDst = &pMbufDst[i]; + cesaCmdRing[i].pDst->pFrags = &pFragsDst[idx]; + cesaCmdRing[i].pDst->numFrags = bufNum; + cesaCmdRing[i].pDst->mbufSize = 0; + + for(j=0; jpFrags[j].bufVirtPtr = (MV_U8*)pBuf; + cesaCmdRing[i].pSrc->pFrags[j].bufSize = bufSize; + pBuf += bufSize; + cesaCmdRing[i].pDst->pFrags[j].bufVirtPtr = (MV_U8*)pBuf; + cesaCmdRing[i].pDst->pFrags[j].bufSize = bufSize; + pBuf += bufSize; + } + idx += bufNum; + } + +#ifndef MV_NETBSD + if (mvCpuIfTargetWinGet(CRYPT_ENG, &addrDecWin) == MV_OK) + pSram = (char*)addrDecWin.addrWin.baseLow; + else + { + mvOsPrintf("mvCesaInit: ERR. mvCpuIfTargetWinGet failed\n"); + return; + } + +#ifdef MV_CESA_NO_SRAM + pSram = mvOsMalloc(4*1024+8); + if(pSram == NULL) + { + mvOsPrintf("CesaTest: can't allocate %d bytes for SRAM simulation\n", + 4*1024+8); + /* !!!! Dima cesaTestCleanup();*/ + return; + } + pSram = (MV_U8*)MV_ALIGN_UP((MV_U32)pSram, 8); +#endif /* MV_CESA_NO_SRAM */ + + numOfSessions = CESA_DEF_SESSION_NUM; + queueDepth = CESA_DEF_REQ_SIZE - MV_CESA_MAX_CHAN; + + status = mvCesaInit(numOfSessions, queueDepth, pSram, NULL); + if(status != MV_OK) + { + mvOsPrintf("mvCesaInit is Failed: status = 0x%x\n", status); + /* !!!! Dima cesaTestCleanup();*/ + return; + } +#endif /* !MV_NETBSD */ + + /* Prepare data for tests */ + for(i=0; i<50; i++) + strcat((char*)cesaDataHexStr3, "dd"); + + strcpy((char*)cesaDataAndMd5digest3, cesaDataHexStr3); + strcpy((char*)cesaDataAndSha1digest3, cesaDataHexStr3); + + /* Digest must be 8 byte aligned */ + for(; i<56; i++) + { + strcat((char*)cesaDataAndMd5digest3, "00"); + strcat((char*)cesaDataAndSha1digest3, "00"); + } + strcat((char*)cesaDataAndMd5digest3, cesaHmacMd5digestHex3); + strcat((char*)cesaDataAndSha1digest3, cesaHmacSha1digestHex3); + +#ifndef MV_NETBSD + MV_REG_WRITE( MV_CESA_ISR_CAUSE_REG, 0); + MV_REG_WRITE( MV_CESA_ISR_MASK_REG, MV_CESA_CAUSE_ACC_DMA_MASK); +#endif + +#ifdef MV_VXWORKS + { + MV_STATUS status; + + status = intConnect((VOIDFUNCPTR *)INT_LVL_CESA, cesaTestReadyIsr, (int)NULL); + if (status != OK) + { + mvOsPrintf("CESA: Can't connect CESA (%d) interrupt, status=0x%x \n", + INT_LVL_CESA, status); + /* !!!! Dima cesaTestCleanup();*/ + return; + } + cesaSemId = semMCreate(SEM_Q_PRIORITY | SEM_INVERSION_SAFE | SEM_DELETE_SAFE); + if(cesaSemId == NULL) + { + mvOsPrintf("cesaTestStart: Can't create semaphore\n"); + return; + } + intEnable(INT_LVL_CESA); + } +#endif /* MV_VXWORKS */ + +#if !defined(MV_NETBSD) && defined(__KERNEL__) + if( request_irq(CESA_IRQ, cesaTestReadyIsr, (SA_INTERRUPT) , "cesa_test", NULL ) ) + { + mvOsPrintf( "cannot assign irq\n" ); + /* !!!! Dima cesaTestCleanup();*/ + return; + } + spin_lock_init( &cesaLock ); +#endif +} + +MV_STATUS testRun(int idx, int caseIdx, int iter, + int reqSize, int checkMode) +{ + int testIdx, count, sid, digestSize; + int blockSize; + MV_CESA_TEST_SESSION* pTestSession; + MV_CESA_COMMAND cmd; + MV_STATUS status; + + memset(&cmd, 0, sizeof(cmd)); + + pTestSession = getTestSessionDb(idx, &testIdx); + if(pTestSession == NULL) + { + mvOsPrintf("Test %d is not exist\n", idx); + return MV_BAD_PARAM; + } + pTestSession = &pTestSession[testIdx]; + + sid = pTestSession->sid; + if(sid == -1) + { + mvOsPrintf("Test %d is not opened\n", idx); + return MV_BAD_STATE; + } + switch(pTestSession->cryptoAlgorithm) + { + case MV_CESA_CRYPTO_DES: + case MV_CESA_CRYPTO_3DES: + blockSize = MV_CESA_DES_BLOCK_SIZE; + break; + + case MV_CESA_CRYPTO_AES: + blockSize = MV_CESA_AES_BLOCK_SIZE; + break; + + case MV_CESA_CRYPTO_NULL: + blockSize = 0; + break; + + default: + mvOsPrintf("cesaTestRun: Bad CryptoAlgorithm=%d\n", + pTestSession->cryptoAlgorithm); + return MV_BAD_PARAM; + } + switch(pTestSession->macAlgorithm) + { + case MV_CESA_MAC_MD5: + case MV_CESA_MAC_HMAC_MD5: + digestSize = MV_CESA_MD5_DIGEST_SIZE; + break; + + case MV_CESA_MAC_SHA1: + case MV_CESA_MAC_HMAC_SHA1: + digestSize = MV_CESA_SHA1_DIGEST_SIZE; + break; + default: + digestSize = 0; + } + + if(iter == 0) + iter = CESA_DEF_ITER_NUM; + + if(pTestSession->direction == MV_CESA_DIR_ENCODE) + { + cesaOutputHexStr = cesaTestCases[caseIdx].cipherHexStr; + cesaInputHexStr = cesaTestCases[caseIdx].plainHexStr; + } + else + { + cesaOutputHexStr = cesaTestCases[caseIdx].plainHexStr; + cesaInputHexStr = cesaTestCases[caseIdx].cipherHexStr; + } + + cmd.sessionId = sid; + if(checkMode == CESA_FAST_CHECK_MODE) + { + cmd.cryptoLength = cesaTestCases[caseIdx].cryptoLength; + cmd.macLength = cesaTestCases[caseIdx].macLength; + } + else + { + cmd.cryptoLength = reqSize; + cmd.macLength = reqSize; + } + cesaRateSize = cmd.cryptoLength; + cesaReqSize = cmd.cryptoLength; + cmd.cryptoOffset = 0; + if(pTestSession->operation != MV_CESA_MAC_ONLY) + { + if( (pTestSession->cryptoMode == MV_CESA_CRYPTO_CBC) || + (pTestSession->cryptoMode == MV_CESA_CRYPTO_CTR) ) + { + cmd.ivOffset = 0; + cmd.cryptoOffset = blockSize; + if(cesaTestCases[caseIdx].pCryptoIV == NULL) + { + cmd.ivFromUser = 1; + } + else + { + cmd.ivFromUser = 0; + mvCesaCryptoIvSet(cesaTestCases[caseIdx].pCryptoIV, blockSize); + } + cesaReqSize = cmd.cryptoOffset + cmd.cryptoLength; + } + } + +/* + mvOsPrintf("ivFromUser=%d, cryptoLength=%d, cesaReqSize=%d, cryptoOffset=%d\n", + cmd.ivFromUser, cmd.cryptoLength, cesaReqSize, cmd.cryptoOffset); +*/ + if(pTestSession->operation != MV_CESA_CRYPTO_ONLY) + { + cmd.macOffset = cmd.cryptoOffset; + + if(cesaTestCases[caseIdx].digestOffset == -1) + { + cmd.digestOffset = cmd.macOffset + cmd.macLength; + cmd.digestOffset = MV_ALIGN_UP(cmd.digestOffset, 8); + } + else + { + cmd.digestOffset = cesaTestCases[caseIdx].digestOffset; + } + if( (cmd.digestOffset + digestSize) > cesaReqSize) + cesaReqSize = cmd.digestOffset + digestSize; + } + + cesaCheckMode = checkMode; + + if(checkMode == CESA_NULL_CHECK_MODE) + { + cesaCheckSize = 0; + cesaCheckOffset = 0; + } + else + { + if(pTestSession->operation == MV_CESA_CRYPTO_ONLY) + { + cesaCheckOffset = 0; + cesaCheckSize = cmd.cryptoLength; + } + else + { + cesaCheckSize = digestSize; + cesaCheckOffset = cmd.digestOffset; + } + } +/* + mvOsPrintf("reqSize=%d, checkSize=%d, checkOffset=%d, checkMode=%d\n", + cesaReqSize, cesaCheckSize, cesaCheckOffset, cesaCheckMode); + + mvOsPrintf("blockSize=%d, ivOffset=%d, ivFromUser=%d, crOffset=%d, crLength=%d\n", + blockSize, cmd.ivOffset, cmd.ivFromUser, + cmd.cryptoOffset, cmd.cryptoLength); + + mvOsPrintf("macOffset=%d, digestOffset=%d, macLength=%d\n", + cmd.macOffset, cmd.digestOffset, cmd.macLength); +*/ + status = testCmd(sid, iter, &cmd, pTestSession, + cesaTestCases[caseIdx].pCryptoIV, blockSize); + + if(status != MV_OK) + return status; + + /* Wait when all callbacks is received */ + count = 0; + while(cesaIsReady == MV_FALSE) + { + mvOsSleep(10); + count++; + if(count > 100) + { + mvOsPrintf("testRun: Timeout occured\n"); + return MV_TIMEOUT; + } + } + + return MV_OK; +} + + +void cesaTestStop(void) +{ + MV_CESA_MBUF *pMbufSrc, *pMbufDst; + MV_BUF_INFO *pFragsSrc, *pFragsDst; + int i; + + /* Release all allocated memories */ + pMbufSrc = (MV_CESA_MBUF*)(cesaCmdRing[0].pSrc); + pFragsSrc = cesaCmdRing[0].pSrc->pFrags; + + pMbufDst = (MV_CESA_MBUF*)(cesaCmdRing[0].pDst); + pFragsDst = cesaCmdRing[0].pDst->pFrags; + + mvOsFree(pMbufSrc); + mvOsFree(pMbufDst); + mvOsFree(pFragsSrc); + mvOsFree(pFragsDst); + + for(i=0; i 0) + cryptoError++; + if(cesaReqIdError > 0) + reqIdError++; + + testClose(idx); + } + } + if(cryptoError > 0) + mvOsPrintf("cryptoError : %d\n", cryptoError); + if(reqIdError > 0) + mvOsPrintf("reqIdError : %d\n", reqIdError); + + if(openErrors > 0) + { + mvOsPrintf("Open Errors = %d\n", openErrors); + for(i=0; i<100; i++) + { + if(openErrDisp[i] != 0) + mvOsPrintf("Error %d - occurs %d times\n", i, openErrDisp[i]); + } + } +} + + +void loopback_test(int idx, int iter, int size, char* pPlainData) +{ +} + + +#if defined(MV_VXWORKS) +int testMode = 0; +unsigned __TASKCONV cesaTask(void* args) +{ + int reqSize = cesaReqSize; + + if(testMode == 0) + { + cesaOneTest(cesaTestIdx, cesaCaseIdx, cesaIteration, + reqSize, cesaCheckMode); + } + else + { + if(testMode == 1) + { + cesaTest(cesaIteration, reqSize, cesaCheckMode); + combiTest(cesaIteration, reqSize, cesaCheckMode); + } + else + { + multiSizeTest(cesaIdx, cesaIteration, cesaCheckMode, NULL); + } + } + return 0; +} + +void oneTest(int testIdx, int caseIdx, + int iter, int reqSize, int checkMode) +{ + long rc; + + cesaIteration = iter; + cesaReqSize = cesaRateSize = reqSize; + cesaCheckMode = checkMode; + testMode = 0; + cesaTestIdx = testIdx; + cesaCaseIdx = caseIdx; + rc = mvOsTaskCreate("CESA_T", 100, 4*1024, cesaTask, NULL, &cesaTaskId); + if (rc != MV_OK) + { + mvOsPrintf("hMW: Can't create CESA multiCmd test task, rc = %ld\n", rc); + } +} + +void multiTest(int iter, int reqSize, int checkMode) +{ + long rc; + + cesaIteration = iter; + cesaCheckMode = checkMode; + cesaReqSize = reqSize; + testMode = 1; + rc = mvOsTaskCreate("CESA_T", 100, 4*1024, cesaTask, NULL, &cesaTaskId); + if (rc != MV_OK) + { + mvOsPrintf("hMW: Can't create CESA multiCmd test task, rc = %ld\n", rc); + } +} + +void sizeTest(int testIdx, int iter, int checkMode) +{ + long rc; + + cesaIteration = iter; + cesaCheckMode = checkMode; + testMode = 2; + cesaIdx = testIdx; + rc = mvOsTaskCreate("CESA_T", 100, 4*1024, cesaTask, NULL, &cesaTaskId); + if (rc != MV_OK) + { + mvOsPrintf("hMW: Can't create CESA test task, rc = %ld\n", rc); + } +} + +#endif /* MV_VXWORKS */ + +extern void mvCesaDebugSA(short sid, int mode); +void cesaTestPrintSession(int idx) +{ + int testIdx; + MV_CESA_TEST_SESSION* pTestSession; + + pTestSession = getTestSessionDb(idx, &testIdx); + if(pTestSession == NULL) + { + mvOsPrintf("Test %d is not exist\n", idx); + return; + } + pTestSession = &pTestSession[testIdx]; + + if(pTestSession->sid == -1) + { + mvOsPrintf("Test session %d is not opened\n", idx); + return; + } + + mvCesaDebugSA(pTestSession->sid, 1); +} + +void cesaTestPrintStatus(void) +{ + mvOsPrintf("\n\t Cesa Test Status\n\n"); + + mvOsPrintf("isrCount=%d\n", + cesaTestIsrCount); + +#ifdef CESA_TEST_DEBUG + { + int i, j; + j = cesaTestTraceIdx; + mvOsPrintf("No Type Cause rCause iCause Res Time pReady pProc pEmpty\n"); + for(i=0; itable = mvOsMalloc(numOfEntries*sizeof(MV_LRU_ENTRY)); + if(pLruCache->table == NULL) + { + mvOsFree(pLruCache); + return NULL; + } + memset(pLruCache->table, 0, numOfEntries*sizeof(MV_LRU_ENTRY)); + pLruCache->tableSize = numOfEntries; + + for(i=0; itable[i].next = i+1; + pLruCache->table[i].prev = i-1; + } + pLruCache->least = 0; + pLruCache->most = numOfEntries-1; + + return pLruCache; +} + +void mvLruCacheFinish(MV_LRU_CACHE* pLruCache) +{ + mvOsFree(pLruCache->table); + mvOsFree(pLruCache); +} + +/* Update LRU cache database after using cache Index */ +void mvLruCacheIdxUpdate(MV_LRU_CACHE* pLruHndl, int cacheIdx) +{ + int prev, next; + + if(cacheIdx == pLruHndl->most) + return; + + next = pLruHndl->table[cacheIdx].next; + if(cacheIdx == pLruHndl->least) + { + pLruHndl->least = next; + } + else + { + prev = pLruHndl->table[cacheIdx].prev; + + pLruHndl->table[next].prev = prev; + pLruHndl->table[prev].next = next; + } + + pLruHndl->table[pLruHndl->most].next = cacheIdx; + pLruHndl->table[cacheIdx].prev = pLruHndl->most; + pLruHndl->most = cacheIdx; +} + +/* Delete LRU cache entry */ +void mvLruCacheIdxDelete(MV_LRU_CACHE* pLruHndl, int cacheIdx) +{ + int prev, next; + + if(cacheIdx == pLruHndl->least) + return; + + prev = pLruHndl->table[cacheIdx].prev; + if(cacheIdx == pLruHndl->most) + { + pLruHndl->most = prev; + } + else + { + next = pLruHndl->table[cacheIdx].next; + + pLruHndl->table[next].prev = prev; + pLruHndl->table[prev].next = next; + } + pLruHndl->table[pLruHndl->least].prev = cacheIdx; + pLruHndl->table[cacheIdx].next = pLruHndl->least; + pLruHndl->least = cacheIdx; +} diff --git a/target/linux/generic-2.4/files/crypto/ocf/kirkwood/cesa/mvLru.h b/target/linux/generic-2.4/files/crypto/ocf/kirkwood/cesa/mvLru.h new file mode 100644 index 0000000000..896e7f81c1 --- /dev/null +++ b/target/linux/generic-2.4/files/crypto/ocf/kirkwood/cesa/mvLru.h @@ -0,0 +1,112 @@ +/******************************************************************************* +Copyright (C) Marvell International Ltd. and its affiliates + +This software file (the "File") is owned and distributed by Marvell +International Ltd. and/or its affiliates ("Marvell") under the following +alternative licensing terms. Once you have made an election to distribute the +File under one of the following license alternatives, please (i) delete this +introductory statement regarding license alternatives, (ii) delete the two +license alternatives that you have not elected to use and (iii) preserve the +Marvell copyright notice above. + +******************************************************************************** +Marvell Commercial License Option + +If you received this File from Marvell and you have entered into a commercial +license agreement (a "Commercial License") with Marvell, the File is licensed +to you under the terms of the applicable Commercial License. + +******************************************************************************** +Marvell GPL License Option + +If you received this File from Marvell, you may opt to use, redistribute and/or +modify this File in accordance with the terms and conditions of the General +Public License Version 2, June 1991 (the "GPL License"), a copy of which is +available along with the File in the license.txt file or by writing to the Free +Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or +on the worldwide web at http://www.gnu.org/licenses/gpl.txt. + +THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED +WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY +DISCLAIMED. The GPL License provides additional details about this warranty +disclaimer. +******************************************************************************** +Marvell BSD License Option + +If you received this File from Marvell, you may opt to use, redistribute and/or +modify this File under the following licensing terms. +Redistribution and use in source and binary forms, with or without modification, +are permitted provided that the following conditions are met: + + * Redistributions of source code must retain the above copyright notice, + this list of conditions and the following disclaimer. + + * Redistributions in binary form must reproduce the above copyright + notice, this list of conditions and the following disclaimer in the + documentation and/or other materials provided with the distribution. + + * Neither the name of Marvell nor the names of its contributors may be + used to endorse or promote products derived from this software without + specific prior written permission. + +THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND +ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED +WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE +DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR +ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES +(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; +LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON +ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS +SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + +*******************************************************************************/ +/******************************************************************************* +* mvLru.h - Header File for Least Recently Used Cache algorithm +* +* DESCRIPTION: +* This header file contains macros typedefs and function declaration for +* the Least Recently Used Cache algorithm. +* +*******************************************************************************/ + +#ifndef __mvLru_h__ +#define __mvLru_h__ + + +typedef struct +{ + int next; + int prev; +} MV_LRU_ENTRY; + +typedef struct +{ + int least; + int most; + MV_LRU_ENTRY* table; + int tableSize; + +}MV_LRU_CACHE; + + +/* Find Cache index for replacement LRU */ +static INLINE int mvLruCacheIdxFind(MV_LRU_CACHE* pLruHndl) +{ + return pLruHndl->least; +} + +/* Init LRU cache module */ +MV_LRU_CACHE* mvLruCacheInit(int numOfEntries); + +/* Finish LRU cache module */ +void mvLruCacheFinish(MV_LRU_CACHE* pLruHndl); + +/* Update LRU cache database after using cache Index */ +void mvLruCacheIdxUpdate(MV_LRU_CACHE* pLruHndl, int cacheIdx); + +/* Delete LRU cache entry */ +void mvLruCacheIdxDelete(MV_LRU_CACHE* pLruHndl, int cacheIdx); + + +#endif /* __mvLru_h__ */ diff --git a/target/linux/generic-2.4/files/crypto/ocf/kirkwood/cesa/mvMD5.c b/target/linux/generic-2.4/files/crypto/ocf/kirkwood/cesa/mvMD5.c new file mode 100644 index 0000000000..189f6292ef --- /dev/null +++ b/target/linux/generic-2.4/files/crypto/ocf/kirkwood/cesa/mvMD5.c @@ -0,0 +1,349 @@ +/******************************************************************************* +Copyright (C) Marvell International Ltd. and its affiliates + +This software file (the "File") is owned and distributed by Marvell +International Ltd. and/or its affiliates ("Marvell") under the following +alternative licensing terms. Once you have made an election to distribute the +File under one of the following license alternatives, please (i) delete this +introductory statement regarding license alternatives, (ii) delete the two +license alternatives that you have not elected to use and (iii) preserve the +Marvell copyright notice above. + +******************************************************************************** +Marvell Commercial License Option + +If you received this File from Marvell and you have entered into a commercial +license agreement (a "Commercial License") with Marvell, the File is licensed +to you under the terms of the applicable Commercial License. + +******************************************************************************** +Marvell GPL License Option + +If you received this File from Marvell, you may opt to use, redistribute and/or +modify this File in accordance with the terms and conditions of the General +Public License Version 2, June 1991 (the "GPL License"), a copy of which is +available along with the File in the license.txt file or by writing to the Free +Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or +on the worldwide web at http://www.gnu.org/licenses/gpl.txt. + +THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED +WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY +DISCLAIMED. The GPL License provides additional details about this warranty +disclaimer. +******************************************************************************** +Marvell BSD License Option + +If you received this File from Marvell, you may opt to use, redistribute and/or +modify this File under the following licensing terms. +Redistribution and use in source and binary forms, with or without modification, +are permitted provided that the following conditions are met: + + * Redistributions of source code must retain the above copyright notice, + this list of conditions and the following disclaimer. + + * Redistributions in binary form must reproduce the above copyright + notice, this list of conditions and the following disclaimer in the + documentation and/or other materials provided with the distribution. + + * Neither the name of Marvell nor the names of its contributors may be + used to endorse or promote products derived from this software without + specific prior written permission. + +THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND +ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED +WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE +DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR +ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES +(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; +LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON +ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS +SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + +*******************************************************************************/ + +#include "mvOs.h" +#include "mvMD5.h" + +static void mvMD5Transform(MV_U32 buf[4], MV_U32 const in[MV_MD5_MAC_LEN]); + +#ifdef MV_CPU_LE +#define mvByteReverse(buf, len) /* Nothing */ +#else +static void mvByteReverse(unsigned char *buf, unsigned longs); + +/* + * Note: this code is harmless on little-endian machines. + */ +static void mvByteReverse(unsigned char *buf, unsigned longs) +{ + MV_U32 t; + + do + { + t = (MV_U32) ((unsigned) buf[3] << 8 | buf[2]) << 16 | + ((unsigned) buf[1] << 8 | buf[0]); + *(MV_U32 *) buf = t; + buf += 4; + } while (--longs); +} +#endif + +/* + * Start MD5 accumulation. Set bit count to 0 and buffer to mysterious + * initialization constants. + */ +void mvMD5Init(MV_MD5_CONTEXT *ctx) +{ + ctx->buf[0] = 0x67452301; + ctx->buf[1] = 0xefcdab89; + ctx->buf[2] = 0x98badcfe; + ctx->buf[3] = 0x10325476; + + ctx->bits[0] = 0; + ctx->bits[1] = 0; +} + +/* + * Update context to reflect the concatenation of another buffer full + * of bytes. + */ +void mvMD5Update(MV_MD5_CONTEXT *ctx, unsigned char const *buf, unsigned len) +{ + MV_U32 t; + + /* Update bitcount */ + + t = ctx->bits[0]; + if ((ctx->bits[0] = t + ((MV_U32) len << 3)) < t) + ctx->bits[1]++; /* Carry from low to high */ + ctx->bits[1] += len >> 29; + + t = (t >> 3) & 0x3f; /* Bytes already in shsInfo->data */ + + /* Handle any leading odd-sized chunks */ + + if (t) + { + unsigned char *p = (unsigned char *) ctx->in + t; + + t = 64 - t; + if (len < t) + { + memcpy(p, buf, len); + return; + } + memcpy(p, buf, t); + mvByteReverse(ctx->in, MV_MD5_MAC_LEN); + mvMD5Transform(ctx->buf, (MV_U32 *) ctx->in); + buf += t; + len -= t; + } + /* Process data in 64-byte chunks */ + + while (len >= 64) + { + memcpy(ctx->in, buf, 64); + mvByteReverse(ctx->in, MV_MD5_MAC_LEN); + mvMD5Transform(ctx->buf, (MV_U32 *) ctx->in); + buf += 64; + len -= 64; + } + + /* Handle any remaining bytes of data. */ + + memcpy(ctx->in, buf, len); +} + +/* + * Final wrapup - pad to 64-byte boundary with the bit pattern + * 1 0* (64-bit count of bits processed, MSB-first) + */ +void mvMD5Final(unsigned char digest[MV_MD5_MAC_LEN], MV_MD5_CONTEXT *ctx) +{ + unsigned count; + unsigned char *p; + + /* Compute number of bytes mod 64 */ + count = (ctx->bits[0] >> 3) & 0x3F; + + /* Set the first char of padding to 0x80. This is safe since there is + always at least one byte free */ + p = ctx->in + count; + *p++ = 0x80; + + /* Bytes of padding needed to make 64 bytes */ + count = 64 - 1 - count; + + /* Pad out to 56 mod 64 */ + if (count < 8) + { + /* Two lots of padding: Pad the first block to 64 bytes */ + memset(p, 0, count); + mvByteReverse(ctx->in, MV_MD5_MAC_LEN); + mvMD5Transform(ctx->buf, (MV_U32 *) ctx->in); + + /* Now fill the next block with 56 bytes */ + memset(ctx->in, 0, 56); + } + else + { + /* Pad block to 56 bytes */ + memset(p, 0, count - 8); + } + mvByteReverse(ctx->in, 14); + + /* Append length in bits and transform */ + ((MV_U32 *) ctx->in)[14] = ctx->bits[0]; + ((MV_U32 *) ctx->in)[15] = ctx->bits[1]; + + mvMD5Transform(ctx->buf, (MV_U32 *) ctx->in); + mvByteReverse((unsigned char *) ctx->buf, 4); + memcpy(digest, ctx->buf, MV_MD5_MAC_LEN); + memset(ctx, 0, sizeof(ctx)); /* In case it's sensitive */ +} + +/* The four core functions - F1 is optimized somewhat */ + +/* #define F1(x, y, z) (x & y | ~x & z) */ +#define F1(x, y, z) (z ^ (x & (y ^ z))) +#define F2(x, y, z) F1(z, x, y) +#define F3(x, y, z) (x ^ y ^ z) +#define F4(x, y, z) (y ^ (x | ~z)) + +/* This is the central step in the MD5 algorithm. */ +#define MD5STEP(f, w, x, y, z, data, s) \ + ( w += f(x, y, z) + data, w = w<>(32-s), w += x ) + +/* + * The core of the MD5 algorithm, this alters an existing MD5 hash to + * reflect the addition of 16 longwords of new data. MD5Update blocks + * the data and converts bytes into longwords for this routine. + */ +static void mvMD5Transform(MV_U32 buf[4], MV_U32 const in[MV_MD5_MAC_LEN]) +{ + register MV_U32 a, b, c, d; + + a = buf[0]; + b = buf[1]; + c = buf[2]; + d = buf[3]; + + MD5STEP(F1, a, b, c, d, in[0] + 0xd76aa478, 7); + MD5STEP(F1, d, a, b, c, in[1] + 0xe8c7b756, 12); + MD5STEP(F1, c, d, a, b, in[2] + 0x242070db, 17); + MD5STEP(F1, b, c, d, a, in[3] + 0xc1bdceee, 22); + MD5STEP(F1, a, b, c, d, in[4] + 0xf57c0faf, 7); + MD5STEP(F1, d, a, b, c, in[5] + 0x4787c62a, 12); + MD5STEP(F1, c, d, a, b, in[6] + 0xa8304613, 17); + MD5STEP(F1, b, c, d, a, in[7] + 0xfd469501, 22); + MD5STEP(F1, a, b, c, d, in[8] + 0x698098d8, 7); + MD5STEP(F1, d, a, b, c, in[9] + 0x8b44f7af, 12); + MD5STEP(F1, c, d, a, b, in[10] + 0xffff5bb1, 17); + MD5STEP(F1, b, c, d, a, in[11] + 0x895cd7be, 22); + MD5STEP(F1, a, b, c, d, in[12] + 0x6b901122, 7); + MD5STEP(F1, d, a, b, c, in[13] + 0xfd987193, 12); + MD5STEP(F1, c, d, a, b, in[14] + 0xa679438e, 17); + MD5STEP(F1, b, c, d, a, in[15] + 0x49b40821, 22); + + MD5STEP(F2, a, b, c, d, in[1] + 0xf61e2562, 5); + MD5STEP(F2, d, a, b, c, in[6] + 0xc040b340, 9); + MD5STEP(F2, c, d, a, b, in[11] + 0x265e5a51, 14); + MD5STEP(F2, b, c, d, a, in[0] + 0xe9b6c7aa, 20); + MD5STEP(F2, a, b, c, d, in[5] + 0xd62f105d, 5); + MD5STEP(F2, d, a, b, c, in[10] + 0x02441453, 9); + MD5STEP(F2, c, d, a, b, in[15] + 0xd8a1e681, 14); + MD5STEP(F2, b, c, d, a, in[4] + 0xe7d3fbc8, 20); + MD5STEP(F2, a, b, c, d, in[9] + 0x21e1cde6, 5); + MD5STEP(F2, d, a, b, c, in[14] + 0xc33707d6, 9); + MD5STEP(F2, c, d, a, b, in[3] + 0xf4d50d87, 14); + MD5STEP(F2, b, c, d, a, in[8] + 0x455a14ed, 20); + MD5STEP(F2, a, b, c, d, in[13] + 0xa9e3e905, 5); + MD5STEP(F2, d, a, b, c, in[2] + 0xfcefa3f8, 9); + MD5STEP(F2, c, d, a, b, in[7] + 0x676f02d9, 14); + MD5STEP(F2, b, c, d, a, in[12] + 0x8d2a4c8a, 20); + + MD5STEP(F3, a, b, c, d, in[5] + 0xfffa3942, 4); + MD5STEP(F3, d, a, b, c, in[8] + 0x8771f681, 11); + MD5STEP(F3, c, d, a, b, in[11] + 0x6d9d6122, 16); + MD5STEP(F3, b, c, d, a, in[14] + 0xfde5380c, 23); + MD5STEP(F3, a, b, c, d, in[1] + 0xa4beea44, 4); + MD5STEP(F3, d, a, b, c, in[4] + 0x4bdecfa9, 11); + MD5STEP(F3, c, d, a, b, in[7] + 0xf6bb4b60, 16); + MD5STEP(F3, b, c, d, a, in[10] + 0xbebfbc70, 23); + MD5STEP(F3, a, b, c, d, in[13] + 0x289b7ec6, 4); + MD5STEP(F3, d, a, b, c, in[0] + 0xeaa127fa, 11); + MD5STEP(F3, c, d, a, b, in[3] + 0xd4ef3085, 16); + MD5STEP(F3, b, c, d, a, in[6] + 0x04881d05, 23); + MD5STEP(F3, a, b, c, d, in[9] + 0xd9d4d039, 4); + MD5STEP(F3, d, a, b, c, in[12] + 0xe6db99e5, 11); + MD5STEP(F3, c, d, a, b, in[15] + 0x1fa27cf8, 16); + MD5STEP(F3, b, c, d, a, in[2] + 0xc4ac5665, 23); + + MD5STEP(F4, a, b, c, d, in[0] + 0xf4292244, 6); + MD5STEP(F4, d, a, b, c, in[7] + 0x432aff97, 10); + MD5STEP(F4, c, d, a, b, in[14] + 0xab9423a7, 15); + MD5STEP(F4, b, c, d, a, in[5] + 0xfc93a039, 21); + MD5STEP(F4, a, b, c, d, in[12] + 0x655b59c3, 6); + MD5STEP(F4, d, a, b, c, in[3] + 0x8f0ccc92, 10); + MD5STEP(F4, c, d, a, b, in[10] + 0xffeff47d, 15); + MD5STEP(F4, b, c, d, a, in[1] + 0x85845dd1, 21); + MD5STEP(F4, a, b, c, d, in[8] + 0x6fa87e4f, 6); + MD5STEP(F4, d, a, b, c, in[15] + 0xfe2ce6e0, 10); + MD5STEP(F4, c, d, a, b, in[6] + 0xa3014314, 15); + MD5STEP(F4, b, c, d, a, in[13] + 0x4e0811a1, 21); + MD5STEP(F4, a, b, c, d, in[4] + 0xf7537e82, 6); + MD5STEP(F4, d, a, b, c, in[11] + 0xbd3af235, 10); + MD5STEP(F4, c, d, a, b, in[2] + 0x2ad7d2bb, 15); + MD5STEP(F4, b, c, d, a, in[9] + 0xeb86d391, 21); + + buf[0] += a; + buf[1] += b; + buf[2] += c; + buf[3] += d; +} + +void mvMD5(unsigned char const *buf, unsigned len, unsigned char* digest) +{ + MV_MD5_CONTEXT ctx; + + mvMD5Init(&ctx); + mvMD5Update(&ctx, buf, len); + mvMD5Final(digest, &ctx); +} + + +void mvHmacMd5(unsigned char const* text, int text_len, + unsigned char const* key, int key_len, + unsigned char* digest) +{ + int i; + MV_MD5_CONTEXT ctx; + unsigned char k_ipad[64+1]; /* inner padding - key XORd with ipad */ + unsigned char k_opad[64+1]; /* outer padding - key XORd with opad */ + + /* start out by storing key in pads */ + memset(k_ipad, 0, 64); + memcpy(k_ipad, key, key_len); + memset(k_opad, 0, 64); + memcpy(k_opad, key, key_len); + + /* XOR key with ipad and opad values */ + for (i=0; i<64; i++) + { + k_ipad[i] ^= 0x36; + k_opad[i] ^= 0x5c; + } + + /* perform inner MD5 */ + mvMD5Init(&ctx); /* init ctx for 1st pass */ + mvMD5Update(&ctx, k_ipad, 64); /* start with inner pad */ + mvMD5Update(&ctx, text, text_len); /* then text of datagram */ + mvMD5Final(digest, &ctx); /* finish up 1st pass */ + + /* perform outer MD5 */ + mvMD5Init(&ctx); /* init ctx for 2nd pass */ + mvMD5Update(&ctx, k_opad, 64); /* start with outer pad */ + mvMD5Update(&ctx, digest, 16); /* then results of 1st hash */ + mvMD5Final(digest, &ctx); /* finish up 2nd pass */ +} diff --git a/target/linux/generic-2.4/files/crypto/ocf/kirkwood/cesa/mvMD5.h b/target/linux/generic-2.4/files/crypto/ocf/kirkwood/cesa/mvMD5.h new file mode 100644 index 0000000000..d05c6b66fb --- /dev/null +++ b/target/linux/generic-2.4/files/crypto/ocf/kirkwood/cesa/mvMD5.h @@ -0,0 +1,93 @@ +/******************************************************************************* +Copyright (C) Marvell International Ltd. and its affiliates + +This software file (the "File") is owned and distributed by Marvell +International Ltd. and/or its affiliates ("Marvell") under the following +alternative licensing terms. Once you have made an election to distribute the +File under one of the following license alternatives, please (i) delete this +introductory statement regarding license alternatives, (ii) delete the two +license alternatives that you have not elected to use and (iii) preserve the +Marvell copyright notice above. + +******************************************************************************** +Marvell Commercial License Option + +If you received this File from Marvell and you have entered into a commercial +license agreement (a "Commercial License") with Marvell, the File is licensed +to you under the terms of the applicable Commercial License. + +******************************************************************************** +Marvell GPL License Option + +If you received this File from Marvell, you may opt to use, redistribute and/or +modify this File in accordance with the terms and conditions of the General +Public License Version 2, June 1991 (the "GPL License"), a copy of which is +available along with the File in the license.txt file or by writing to the Free +Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or +on the worldwide web at http://www.gnu.org/licenses/gpl.txt. + +THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED +WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY +DISCLAIMED. The GPL License provides additional details about this warranty +disclaimer. +******************************************************************************** +Marvell BSD License Option + +If you received this File from Marvell, you may opt to use, redistribute and/or +modify this File under the following licensing terms. +Redistribution and use in source and binary forms, with or without modification, +are permitted provided that the following conditions are met: + + * Redistributions of source code must retain the above copyright notice, + this list of conditions and the following disclaimer. + + * Redistributions in binary form must reproduce the above copyright + notice, this list of conditions and the following disclaimer in the + documentation and/or other materials provided with the distribution. + + * Neither the name of Marvell nor the names of its contributors may be + used to endorse or promote products derived from this software without + specific prior written permission. + +THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND +ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED +WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE +DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR +ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES +(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; +LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON +ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS +SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + +*******************************************************************************/ + +#ifndef __mvMD5_h__ +#define __mvMD5_h__ + +#include "mvMD5.h" + +#define MV_MD5_MAC_LEN 16 + + +typedef struct +{ + MV_U32 buf[4]; + MV_U32 bits[2]; + MV_U8 in[64]; + +} MV_MD5_CONTEXT; + +void mvMD5Init(MV_MD5_CONTEXT *context); +void mvMD5Update(MV_MD5_CONTEXT *context, unsigned char const *buf, + unsigned len); +void mvMD5Final(unsigned char digest[16], MV_MD5_CONTEXT *context); + +void mvMD5(unsigned char const *buf, unsigned len, unsigned char* digest); + +void mvHmacMd5(unsigned char const* text, int text_len, + unsigned char const* key, int key_len, + unsigned char* digest); + + +#endif /* __mvMD5_h__ */ diff --git a/target/linux/generic-2.4/files/crypto/ocf/kirkwood/cesa/mvSHA1.c b/target/linux/generic-2.4/files/crypto/ocf/kirkwood/cesa/mvSHA1.c new file mode 100644 index 0000000000..0e0786b0ca --- /dev/null +++ b/target/linux/generic-2.4/files/crypto/ocf/kirkwood/cesa/mvSHA1.c @@ -0,0 +1,239 @@ +/******************************************************************************* +Copyright (C) Marvell International Ltd. and its affiliates + +This software file (the "File") is owned and distributed by Marvell +International Ltd. and/or its affiliates ("Marvell") under the following +alternative licensing terms. Once you have made an election to distribute the +File under one of the following license alternatives, please (i) delete this +introductory statement regarding license alternatives, (ii) delete the two +license alternatives that you have not elected to use and (iii) preserve the +Marvell copyright notice above. + +******************************************************************************** +Marvell Commercial License Option + +If you received this File from Marvell and you have entered into a commercial +license agreement (a "Commercial License") with Marvell, the File is licensed +to you under the terms of the applicable Commercial License. + +******************************************************************************** +Marvell GPL License Option + +If you received this File from Marvell, you may opt to use, redistribute and/or +modify this File in accordance with the terms and conditions of the General +Public License Version 2, June 1991 (the "GPL License"), a copy of which is +available along with the File in the license.txt file or by writing to the Free +Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or +on the worldwide web at http://www.gnu.org/licenses/gpl.txt. + +THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED +WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY +DISCLAIMED. The GPL License provides additional details about this warranty +disclaimer. +******************************************************************************** +Marvell BSD License Option + +If you received this File from Marvell, you may opt to use, redistribute and/or +modify this File under the following licensing terms. +Redistribution and use in source and binary forms, with or without modification, +are permitted provided that the following conditions are met: + + * Redistributions of source code must retain the above copyright notice, + this list of conditions and the following disclaimer. + + * Redistributions in binary form must reproduce the above copyright + notice, this list of conditions and the following disclaimer in the + documentation and/or other materials provided with the distribution. + + * Neither the name of Marvell nor the names of its contributors may be + used to endorse or promote products derived from this software without + specific prior written permission. + +THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND +ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED +WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE +DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR +ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES +(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; +LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON +ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS +SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + +*******************************************************************************/ + +#include "mvOs.h" +#include "mvSHA1.h" + +#define SHA1HANDSOFF + +typedef union +{ + MV_U8 c[64]; + MV_U32 l[16]; + +} CHAR64LONG16; + +static void mvSHA1Transform(MV_U32 state[5], const MV_U8 *buffer); + +#define rol(value, bits) (((value) << (bits)) | ((value) >> (32 - (bits)))) + + +#ifdef MV_CPU_LE +#define blk0(i) (block->l[i] = (rol(block->l[i], 24) & 0xFF00FF00) | \ + (rol(block->l[i], 8) & 0x00FF00FF)) +#else +#define blk0(i) block->l[i] +#endif +#define blk(i) (block->l[i & 15] = rol(block->l[(i + 13) & 15] ^ \ + block->l[(i + 8) & 15] ^ block->l[(i + 2) & 15] ^ block->l[i & 15], 1)) + +/* (R0+R1), R2, R3, R4 are the different operations used in SHA1 */ +#define R0(v,w,x,y,z,i) \ + z += ((w & (x ^ y)) ^ y) + blk0(i) + 0x5A827999 + rol(v, 5); \ + w = rol(w, 30); +#define R1(v,w,x,y,z,i) \ + z += ((w & (x ^ y)) ^ y) + blk(i) + 0x5A827999 + rol(v, 5); \ + w = rol(w, 30); +#define R2(v,w,x,y,z,i) \ + z += (w ^ x ^ y) + blk(i) + 0x6ED9EBA1 + rol(v, 5); w = rol(w, 30); +#define R3(v,w,x,y,z,i) \ + z += (((w | x) & y) | (w & x)) + blk(i) + 0x8F1BBCDC + rol(v, 5); \ + w = rol(w, 30); +#define R4(v,w,x,y,z,i) \ + z += (w ^ x ^ y) + blk(i) + 0xCA62C1D6 + rol(v, 5); \ + w=rol(w, 30); + +/* Hash a single 512-bit block. This is the core of the algorithm. */ +static void mvSHA1Transform(MV_U32 state[5], const MV_U8 *buffer) +{ + MV_U32 a, b, c, d, e; + CHAR64LONG16* block; + +#ifdef SHA1HANDSOFF + static MV_U32 workspace[16]; + + block = (CHAR64LONG16 *) workspace; + memcpy(block, buffer, 64); +#else + block = (CHAR64LONG16 *) buffer; +#endif + /* Copy context->state[] to working vars */ + a = state[0]; + b = state[1]; + c = state[2]; + d = state[3]; + e = state[4]; + /* 4 rounds of 20 operations each. Loop unrolled. */ + R0(a,b,c,d,e, 0); R0(e,a,b,c,d, 1); R0(d,e,a,b,c, 2); R0(c,d,e,a,b, 3); + R0(b,c,d,e,a, 4); R0(a,b,c,d,e, 5); R0(e,a,b,c,d, 6); R0(d,e,a,b,c, 7); + R0(c,d,e,a,b, 8); R0(b,c,d,e,a, 9); R0(a,b,c,d,e,10); R0(e,a,b,c,d,11); + R0(d,e,a,b,c,12); R0(c,d,e,a,b,13); R0(b,c,d,e,a,14); R0(a,b,c,d,e,15); + R1(e,a,b,c,d,16); R1(d,e,a,b,c,17); R1(c,d,e,a,b,18); R1(b,c,d,e,a,19); + R2(a,b,c,d,e,20); R2(e,a,b,c,d,21); R2(d,e,a,b,c,22); R2(c,d,e,a,b,23); + R2(b,c,d,e,a,24); R2(a,b,c,d,e,25); R2(e,a,b,c,d,26); R2(d,e,a,b,c,27); + R2(c,d,e,a,b,28); R2(b,c,d,e,a,29); R2(a,b,c,d,e,30); R2(e,a,b,c,d,31); + R2(d,e,a,b,c,32); R2(c,d,e,a,b,33); R2(b,c,d,e,a,34); R2(a,b,c,d,e,35); + R2(e,a,b,c,d,36); R2(d,e,a,b,c,37); R2(c,d,e,a,b,38); R2(b,c,d,e,a,39); + R3(a,b,c,d,e,40); R3(e,a,b,c,d,41); R3(d,e,a,b,c,42); R3(c,d,e,a,b,43); + R3(b,c,d,e,a,44); R3(a,b,c,d,e,45); R3(e,a,b,c,d,46); R3(d,e,a,b,c,47); + R3(c,d,e,a,b,48); R3(b,c,d,e,a,49); R3(a,b,c,d,e,50); R3(e,a,b,c,d,51); + R3(d,e,a,b,c,52); R3(c,d,e,a,b,53); R3(b,c,d,e,a,54); R3(a,b,c,d,e,55); + R3(e,a,b,c,d,56); R3(d,e,a,b,c,57); R3(c,d,e,a,b,58); R3(b,c,d,e,a,59); + R4(a,b,c,d,e,60); R4(e,a,b,c,d,61); R4(d,e,a,b,c,62); R4(c,d,e,a,b,63); + R4(b,c,d,e,a,64); R4(a,b,c,d,e,65); R4(e,a,b,c,d,66); R4(d,e,a,b,c,67); + R4(c,d,e,a,b,68); R4(b,c,d,e,a,69); R4(a,b,c,d,e,70); R4(e,a,b,c,d,71); + R4(d,e,a,b,c,72); R4(c,d,e,a,b,73); R4(b,c,d,e,a,74); R4(a,b,c,d,e,75); + R4(e,a,b,c,d,76); R4(d,e,a,b,c,77); R4(c,d,e,a,b,78); R4(b,c,d,e,a,79); + /* Add the working vars back into context.state[] */ + state[0] += a; + state[1] += b; + state[2] += c; + state[3] += d; + state[4] += e; + /* Wipe variables */ + a = b = c = d = e = 0; +} + +void mvSHA1Init(MV_SHA1_CTX* context) +{ + /* SHA1 initialization constants */ + context->state[0] = 0x67452301; + context->state[1] = 0xEFCDAB89; + context->state[2] = 0x98BADCFE; + context->state[3] = 0x10325476; + context->state[4] = 0xC3D2E1F0; + context->count[0] = context->count[1] = 0; +} + + +/* Run your data through this. */ +void mvSHA1Update(MV_SHA1_CTX *context, MV_U8 const *data, + unsigned int len) +{ + MV_U32 i, j; + + j = (context->count[0] >> 3) & 63; + if ((context->count[0] += len << 3) < (len << 3)) + context->count[1]++; + context->count[1] += (len >> 29); + if ((j + len) > 63) + { + memcpy(&context->buffer[j], data, (i = 64-j)); + mvSHA1Transform(context->state, context->buffer); + for ( ; i + 63 < len; i += 64) + { + mvSHA1Transform(context->state, &data[i]); + } + j = 0; + } + else + { + i = 0; + } + memcpy(&context->buffer[j], &data[i], len - i); +} + +void mvSHA1Final(MV_U8* digest, MV_SHA1_CTX* context) +{ + MV_U32 i; + MV_U8 finalcount[8]; + + for (i = 0; i < 8; i++) + { + finalcount[i] = (unsigned char)((context->count[(i >= 4 ? 0 : 1)] >> + ((3-(i & 3)) * 8) ) & 255); /* Endian independent */ + } + mvSHA1Update(context, (const unsigned char *) "\200", 1); + while ((context->count[0] & 504) != 448) + { + mvSHA1Update(context, (const unsigned char *) "\0", 1); + } + mvSHA1Update(context, finalcount, 8); /* Should cause a mvSHA1Transform() + */ + for (i = 0; i < 20; i++) + { + digest[i] = (unsigned char) + ((context->state[i >> 2] >> ((3 - (i & 3)) * 8)) & 255); + } + /* Wipe variables */ + i = 0; + memset(context->buffer, 0, 64); + memset(context->state, 0, 20); + memset(context->count, 0, 8); + memset(finalcount, 0, 8); + +#ifdef SHA1HANDSOFF /* make SHA1Transform overwrite it's own static vars */ + mvSHA1Transform(context->state, context->buffer); +#endif +} + + +void mvSHA1(MV_U8 const *buf, unsigned int len, MV_U8* digest) +{ + MV_SHA1_CTX ctx; + + mvSHA1Init(&ctx); + mvSHA1Update(&ctx, buf, len); + mvSHA1Final(digest, &ctx); +} diff --git a/target/linux/generic-2.4/files/crypto/ocf/kirkwood/cesa/mvSHA1.h b/target/linux/generic-2.4/files/crypto/ocf/kirkwood/cesa/mvSHA1.h new file mode 100644 index 0000000000..17df9fcdbf --- /dev/null +++ b/target/linux/generic-2.4/files/crypto/ocf/kirkwood/cesa/mvSHA1.h @@ -0,0 +1,88 @@ +/******************************************************************************* +Copyright (C) Marvell International Ltd. and its affiliates + +This software file (the "File") is owned and distributed by Marvell +International Ltd. and/or its affiliates ("Marvell") under the following +alternative licensing terms. Once you have made an election to distribute the +File under one of the following license alternatives, please (i) delete this +introductory statement regarding license alternatives, (ii) delete the two +license alternatives that you have not elected to use and (iii) preserve the +Marvell copyright notice above. + +******************************************************************************** +Marvell Commercial License Option + +If you received this File from Marvell and you have entered into a commercial +license agreement (a "Commercial License") with Marvell, the File is licensed +to you under the terms of the applicable Commercial License. + +******************************************************************************** +Marvell GPL License Option + +If you received this File from Marvell, you may opt to use, redistribute and/or +modify this File in accordance with the terms and conditions of the General +Public License Version 2, June 1991 (the "GPL License"), a copy of which is +available along with the File in the license.txt file or by writing to the Free +Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or +on the worldwide web at http://www.gnu.org/licenses/gpl.txt. + +THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED +WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY +DISCLAIMED. The GPL License provides additional details about this warranty +disclaimer. +******************************************************************************** +Marvell BSD License Option + +If you received this File from Marvell, you may opt to use, redistribute and/or +modify this File under the following licensing terms. +Redistribution and use in source and binary forms, with or without modification, +are permitted provided that the following conditions are met: + + * Redistributions of source code must retain the above copyright notice, + this list of conditions and the following disclaimer. + + * Redistributions in binary form must reproduce the above copyright + notice, this list of conditions and the following disclaimer in the + documentation and/or other materials provided with the distribution. + + * Neither the name of Marvell nor the names of its contributors may be + used to endorse or promote products derived from this software without + specific prior written permission. + +THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND +ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED +WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE +DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR +ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES +(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; +LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON +ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS +SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + +*******************************************************************************/ + +#ifndef __mvSHA1_h__ +#define __mvSHA1_h__ + +#include "mvSHA1.h" + +#define MV_SHA1_MAC_LEN 20 + + +typedef struct +{ + MV_U32 state[5]; + MV_U32 count[2]; + MV_U8 buffer[64]; + +} MV_SHA1_CTX; + +void mvSHA1Init(MV_SHA1_CTX *context); +void mvSHA1Update(MV_SHA1_CTX *context, MV_U8 const *buf, unsigned int len); +void mvSHA1Final(MV_U8* digest, MV_SHA1_CTX *context); + +void mvSHA1(MV_U8 const *buf, unsigned int len, MV_U8* digest); + + +#endif /* __mvSHA1_h__ */ diff --git a/target/linux/generic-2.4/files/crypto/ocf/kirkwood/cesa_ocf_drv.c b/target/linux/generic-2.4/files/crypto/ocf/kirkwood/cesa_ocf_drv.c new file mode 100644 index 0000000000..ccf92276c0 --- /dev/null +++ b/target/linux/generic-2.4/files/crypto/ocf/kirkwood/cesa_ocf_drv.c @@ -0,0 +1,1296 @@ +/******************************************************************************* +Copyright (C) Marvell International Ltd. and its affiliates + +This software file (the "File") is owned and distributed by Marvell +International Ltd. and/or its affiliates ("Marvell") under the following +alternative licensing terms. Once you have made an election to distribute the +File under one of the following license alternatives, please (i) delete this +introductory statement regarding license alternatives, (ii) delete the two +license alternatives that you have not elected to use and (iii) preserve the +Marvell copyright notice above. + + +******************************************************************************** +Marvell GPL License Option + +If you received this File from Marvell, you may opt to use, redistribute and/or +modify this File in accordance with the terms and conditions of the General +Public License Version 2, June 1991 (the "GPL License"), a copy of which is +available along with the File in the license.txt file or by writing to the Free +Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or +on the worldwide web at http://www.gnu.org/licenses/gpl.txt. + +THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED +WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY +DISCLAIMED. The GPL License provides additional details about this warranty +disclaimer. +*******************************************************************************/ + +#ifndef AUTOCONF_INCLUDED +#include +#endif +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include "ctrlEnv/sys/mvSysCesa.h" +#include "cesa/mvCesa.h" /* moved here before cryptodev.h due to include dependencies */ +#include +#include +#include +#include +#include "mvDebug.h" + +#include "cesa/mvMD5.h" +#include "cesa/mvSHA1.h" + +#include "cesa/mvCesaRegs.h" +#include "cesa/AES/mvAes.h" +#include "cesa/mvLru.h" + +#undef RT_DEBUG +#ifdef RT_DEBUG +static int debug = 1; +module_param(debug, int, 1); +MODULE_PARM_DESC(debug, "Enable debug"); +#undef dprintk +#define dprintk(a...) if (debug) { printk(a); } else +#else +static int debug = 0; +#undef dprintk +#define dprintk(a...) +#endif + + +/* TDMA Regs */ +#define WINDOW_BASE(i) 0xA00 + (i << 3) +#define WINDOW_CTRL(i) 0xA04 + (i << 3) + +/* interrupt handling */ +#undef CESA_OCF_POLLING +#undef CESA_OCF_TASKLET + +#if defined(CESA_OCF_POLLING) && defined(CESA_OCF_TASKLET) +#error "don't use both tasklet and polling mode" +#endif + +extern int cesaReqResources; +/* support for spliting action into 2 actions */ +#define CESA_OCF_SPLIT + +/* general defines */ +#define CESA_OCF_MAX_SES 128 +#define CESA_Q_SIZE 64 + + +/* data structures */ +struct cesa_ocf_data { + int cipher_alg; + int auth_alg; + int encrypt_tn_auth; +#define auth_tn_decrypt encrypt_tn_auth + int ivlen; + int digestlen; + short sid_encrypt; + short sid_decrypt; + /* fragment workaround sessions */ + short frag_wa_encrypt; + short frag_wa_decrypt; + short frag_wa_auth; +}; + +/* CESA device data */ +struct cesa_dev { + void __iomem *sram; + void __iomem *reg; + struct mv_cesa_platform_data *plat_data; + int irq; +}; + +#define DIGEST_BUF_SIZE 32 +struct cesa_ocf_process { + MV_CESA_COMMAND cesa_cmd; + MV_CESA_MBUF cesa_mbuf; + MV_BUF_INFO cesa_bufs[MV_CESA_MAX_MBUF_FRAGS]; + char digest[DIGEST_BUF_SIZE]; + int digest_len; + struct cryptop *crp; + int need_cb; +}; + +/* global variables */ +static int32_t cesa_ocf_id = -1; +static struct cesa_ocf_data *cesa_ocf_sessions[CESA_OCF_MAX_SES]; +static spinlock_t cesa_lock; +static struct cesa_dev cesa_device; + +/* static APIs */ +static int cesa_ocf_process (device_t, struct cryptop *, int); +static int cesa_ocf_newsession (device_t, u_int32_t *, struct cryptoini *); +static int cesa_ocf_freesession (device_t, u_int64_t); +static void cesa_callback (unsigned long); +static irqreturn_t cesa_interrupt_handler (int, void *); +#ifdef CESA_OCF_POLLING +static void cesa_interrupt_polling(void); +#endif +#ifdef CESA_OCF_TASKLET +static struct tasklet_struct cesa_ocf_tasklet; +#endif + +static struct timeval tt_start; +static struct timeval tt_end; + +/* + * dummy device structure + */ + +static struct { + softc_device_decl sc_dev; +} mv_cesa_dev; + +static device_method_t mv_cesa_methods = { + /* crypto device methods */ + DEVMETHOD(cryptodev_newsession, cesa_ocf_newsession), + DEVMETHOD(cryptodev_freesession,cesa_ocf_freesession), + DEVMETHOD(cryptodev_process, cesa_ocf_process), + DEVMETHOD(cryptodev_kprocess, NULL), +}; + + + +/* Add debug Trace */ +#undef CESA_OCF_TRACE_DEBUG +#ifdef CESA_OCF_TRACE_DEBUG + +#define MV_CESA_USE_TIMER_ID 0 + +typedef struct +{ + int type; /* 0 - isrEmpty, 1 - cesaReadyGet, 2 - cesaAction */ + MV_U32 timeStamp; + MV_U32 cause; + MV_U32 realCause; + MV_U32 dmaCause; + int resources; + MV_CESA_REQ* pReqReady; + MV_CESA_REQ* pReqEmpty; + MV_CESA_REQ* pReqProcess; +} MV_CESA_TEST_TRACE; + +#define MV_CESA_TEST_TRACE_SIZE 50 + +static int cesaTestTraceIdx = 0; +static MV_CESA_TEST_TRACE cesaTestTrace[MV_CESA_TEST_TRACE_SIZE]; + +static void cesaTestTraceAdd(int type) +{ + cesaTestTrace[cesaTestTraceIdx].type = type; + cesaTestTrace[cesaTestTraceIdx].realCause = MV_REG_READ(MV_CESA_ISR_CAUSE_REG); + //cesaTestTrace[cesaTestTraceIdx].idmaCause = MV_REG_READ(IDMA_CAUSE_REG); + cesaTestTrace[cesaTestTraceIdx].resources = cesaReqResources; + cesaTestTrace[cesaTestTraceIdx].pReqReady = pCesaReqReady; + cesaTestTrace[cesaTestTraceIdx].pReqEmpty = pCesaReqEmpty; + cesaTestTrace[cesaTestTraceIdx].pReqProcess = pCesaReqProcess; + cesaTestTrace[cesaTestTraceIdx].timeStamp = mvCntmrRead(MV_CESA_USE_TIMER_ID); + cesaTestTraceIdx++; + if(cesaTestTraceIdx == MV_CESA_TEST_TRACE_SIZE) + cesaTestTraceIdx = 0; +} + +#else /* CESA_OCF_TRACE_DEBUG */ + +#define cesaTestTraceAdd(x) + +#endif /* CESA_OCF_TRACE_DEBUG */ + +unsigned int +get_usec(unsigned int start) +{ + if(start) { + do_gettimeofday (&tt_start); + return 0; + } + else { + do_gettimeofday (&tt_end); + tt_end.tv_sec -= tt_start.tv_sec; + tt_end.tv_usec -= tt_start.tv_usec; + if (tt_end.tv_usec < 0) { + tt_end.tv_usec += 1000 * 1000; + tt_end.tv_sec -= 1; + } + } + printk("time taken is %d\n", (unsigned int)(tt_end.tv_usec + tt_end.tv_sec * 1000000)); + return (tt_end.tv_usec + tt_end.tv_sec * 1000000); +} + +#ifdef RT_DEBUG +/* + * check that the crp action match the current session + */ +static int +ocf_check_action(struct cryptop *crp, struct cesa_ocf_data *cesa_ocf_cur_ses) { + int count = 0; + int encrypt = 0, decrypt = 0, auth = 0; + struct cryptodesc *crd; + + /* Go through crypto descriptors, processing as we go */ + for (crd = crp->crp_desc; crd; crd = crd->crd_next, count++) { + if(count > 2) { + printk("%s,%d: session mode is not supported.\n", __FILE__, __LINE__); + return 1; + } + + /* Encryption /Decryption */ + if(crd->crd_alg == cesa_ocf_cur_ses->cipher_alg) { + /* check that the action is compatible with session */ + if(encrypt || decrypt) { + printk("%s,%d: session mode is not supported.\n", __FILE__, __LINE__); + return 1; + } + + if(crd->crd_flags & CRD_F_ENCRYPT) { /* encrypt */ + if( (count == 2) && (cesa_ocf_cur_ses->encrypt_tn_auth) ) { + printk("%s,%d: sequence isn't supported by this session.\n", __FILE__, __LINE__); + return 1; + } + encrypt++; + } + else { /* decrypt */ + if( (count == 2) && !(cesa_ocf_cur_ses->auth_tn_decrypt) ) { + printk("%s,%d: sequence isn't supported by this session.\n", __FILE__, __LINE__); + return 1; + } + decrypt++; + } + + } + /* Authentication */ + else if(crd->crd_alg == cesa_ocf_cur_ses->auth_alg) { + /* check that the action is compatible with session */ + if(auth) { + printk("%s,%d: session mode is not supported.\n", __FILE__, __LINE__); + return 1; + } + if( (count == 2) && (decrypt) && (cesa_ocf_cur_ses->auth_tn_decrypt)) { + printk("%s,%d: sequence isn't supported by this session.\n", __FILE__, __LINE__); + return 1; + } + if( (count == 2) && (encrypt) && !(cesa_ocf_cur_ses->encrypt_tn_auth)) { + printk("%s,%d: sequence isn't supported by this session.\n", __FILE__, __LINE__); + return 1; + } + auth++; + } + else { + printk("%s,%d: Alg isn't supported by this session.\n", __FILE__, __LINE__); + return 1; + } + } + return 0; + +} +#endif + +/* + * Process a request. + */ +static int +cesa_ocf_process(device_t dev, struct cryptop *crp, int hint) +{ + struct cesa_ocf_process *cesa_ocf_cmd = NULL; + struct cesa_ocf_process *cesa_ocf_cmd_wa = NULL; + MV_CESA_COMMAND *cesa_cmd; + struct cryptodesc *crd; + struct cesa_ocf_data *cesa_ocf_cur_ses; + int sid = 0, temp_len = 0, i; + int encrypt = 0, decrypt = 0, auth = 0; + int status; + struct sk_buff *skb = NULL; + struct uio *uiop = NULL; + unsigned char *ivp; + MV_BUF_INFO *p_buf_info; + MV_CESA_MBUF *p_mbuf_info; + unsigned long flags; + + dprintk("%s()\n", __FUNCTION__); + + if( cesaReqResources <= 1 ) { + dprintk("%s,%d: ERESTART\n", __FILE__, __LINE__); + return ERESTART; + } + +#ifdef RT_DEBUG + /* Sanity check */ + if (crp == NULL) { + printk("%s,%d: EINVAL\n", __FILE__, __LINE__); + return EINVAL; + } + + if (crp->crp_desc == NULL || crp->crp_buf == NULL ) { + printk("%s,%d: EINVAL\n", __FILE__, __LINE__); + crp->crp_etype = EINVAL; + return EINVAL; + } + + sid = crp->crp_sid & 0xffffffff; + if ((sid >= CESA_OCF_MAX_SES) || (cesa_ocf_sessions[sid] == NULL)) { + crp->crp_etype = ENOENT; + printk("%s,%d: ENOENT session %d \n", __FILE__, __LINE__, sid); + return EINVAL; + } +#endif + + sid = crp->crp_sid & 0xffffffff; + crp->crp_etype = 0; + cesa_ocf_cur_ses = cesa_ocf_sessions[sid]; + +#ifdef RT_DEBUG + if(ocf_check_action(crp, cesa_ocf_cur_ses)){ + goto p_error; + } +#endif + + /* malloc a new cesa process */ + cesa_ocf_cmd = kmalloc(sizeof(struct cesa_ocf_process), GFP_ATOMIC); + + if (cesa_ocf_cmd == NULL) { + printk("%s,%d: ENOBUFS \n", __FILE__, __LINE__); + goto p_error; + } + memset(cesa_ocf_cmd, 0, sizeof(struct cesa_ocf_process)); + + /* init cesa_process */ + cesa_ocf_cmd->crp = crp; + /* always call callback */ + cesa_ocf_cmd->need_cb = 1; + + /* init cesa_cmd for usage of the HALs */ + cesa_cmd = &cesa_ocf_cmd->cesa_cmd; + cesa_cmd->pReqPrv = (void *)cesa_ocf_cmd; + cesa_cmd->sessionId = cesa_ocf_cur_ses->sid_encrypt; /* defualt use encrypt */ + + /* prepare src buffer */ + /* we send the entire buffer to the HAL, even if only part of it should be encrypt/auth. */ + /* if not using seesions for both encrypt and auth, then it will be wiser to to copy only */ + /* from skip to crd_len. */ + p_buf_info = cesa_ocf_cmd->cesa_bufs; + p_mbuf_info = &cesa_ocf_cmd->cesa_mbuf; + + p_buf_info += 2; /* save 2 first buffers for IV and digest - + we won't append them to the end since, they + might be places in an unaligned addresses. */ + + p_mbuf_info->pFrags = p_buf_info; + temp_len = 0; + + /* handle SKB */ + if (crp->crp_flags & CRYPTO_F_SKBUF) { + + dprintk("%s,%d: handle SKB.\n", __FILE__, __LINE__); + skb = (struct sk_buff *) crp->crp_buf; + + if (skb_shinfo(skb)->nr_frags >= (MV_CESA_MAX_MBUF_FRAGS - 1)) { + printk("%s,%d: %d nr_frags > MV_CESA_MAX_MBUF_FRAGS", __FILE__, __LINE__, skb_shinfo(skb)->nr_frags); + goto p_error; + } + + p_mbuf_info->mbufSize = skb->len; + temp_len = skb->len; + /* first skb fragment */ + p_buf_info->bufSize = skb_headlen(skb); + p_buf_info->bufVirtPtr = skb->data; + p_buf_info++; + + /* now handle all other skb fragments */ + for ( i = 0; i < skb_shinfo(skb)->nr_frags; i++ ) { + skb_frag_t *frag = &skb_shinfo(skb)->frags[i]; + p_buf_info->bufSize = frag->size; + p_buf_info->bufVirtPtr = page_address(frag->page) + frag->page_offset; + p_buf_info++; + } + p_mbuf_info->numFrags = skb_shinfo(skb)->nr_frags + 1; + } + /* handle UIO */ + else if(crp->crp_flags & CRYPTO_F_IOV) { + + dprintk("%s,%d: handle UIO.\n", __FILE__, __LINE__); + uiop = (struct uio *) crp->crp_buf; + + if (uiop->uio_iovcnt > (MV_CESA_MAX_MBUF_FRAGS - 1)) { + printk("%s,%d: %d uio_iovcnt > MV_CESA_MAX_MBUF_FRAGS \n", __FILE__, __LINE__, uiop->uio_iovcnt); + goto p_error; + } + + p_mbuf_info->mbufSize = crp->crp_ilen; + p_mbuf_info->numFrags = uiop->uio_iovcnt; + for(i = 0; i < uiop->uio_iovcnt; i++) { + p_buf_info->bufVirtPtr = uiop->uio_iov[i].iov_base; + p_buf_info->bufSize = uiop->uio_iov[i].iov_len; + temp_len += p_buf_info->bufSize; + dprintk("%s,%d: buf %x-> addr %x, size %x \n" + , __FILE__, __LINE__, i, (unsigned int)p_buf_info->bufVirtPtr, p_buf_info->bufSize); + p_buf_info++; + } + + } + /* handle CONTIG */ + else { + dprintk("%s,%d: handle CONTIG.\n", __FILE__, __LINE__); + p_mbuf_info->numFrags = 1; + p_mbuf_info->mbufSize = crp->crp_ilen; + p_buf_info->bufVirtPtr = crp->crp_buf; + p_buf_info->bufSize = crp->crp_ilen; + temp_len = crp->crp_ilen; + p_buf_info++; + } + + /* Support up to 64K why? cause! */ + if(crp->crp_ilen > 64*1024) { + printk("%s,%d: buf too big %x \n", __FILE__, __LINE__, crp->crp_ilen); + goto p_error; + } + + if( temp_len != crp->crp_ilen ) { + printk("%s,%d: warning size don't match.(%x %x) \n", __FILE__, __LINE__, temp_len, crp->crp_ilen); + } + + cesa_cmd->pSrc = p_mbuf_info; + cesa_cmd->pDst = p_mbuf_info; + + /* restore p_buf_info to point to first available buf */ + p_buf_info = cesa_ocf_cmd->cesa_bufs; + p_buf_info += 1; + + + /* Go through crypto descriptors, processing as we go */ + for (crd = crp->crp_desc; crd; crd = crd->crd_next) { + + /* Encryption /Decryption */ + if(crd->crd_alg == cesa_ocf_cur_ses->cipher_alg) { + + dprintk("%s,%d: cipher", __FILE__, __LINE__); + + cesa_cmd->cryptoOffset = crd->crd_skip; + cesa_cmd->cryptoLength = crd->crd_len; + + if(crd->crd_flags & CRD_F_ENCRYPT) { /* encrypt */ + dprintk(" encrypt \n"); + encrypt++; + + /* handle IV */ + if (crd->crd_flags & CRD_F_IV_EXPLICIT) { /* IV from USER */ + dprintk("%s,%d: IV from USER (offset %x) \n", __FILE__, __LINE__, crd->crd_inject); + cesa_cmd->ivFromUser = 1; + ivp = crd->crd_iv; + + /* + * do we have to copy the IV back to the buffer ? + */ + if ((crd->crd_flags & CRD_F_IV_PRESENT) == 0) { + dprintk("%s,%d: copy the IV back to the buffer\n", __FILE__, __LINE__); + cesa_cmd->ivOffset = crd->crd_inject; + crypto_copy_bits_back(crp->crp_buf, crd->crd_inject, ivp, cesa_ocf_cur_ses->ivlen); + } + else { + dprintk("%s,%d: don't copy the IV back to the buffer \n", __FILE__, __LINE__); + p_mbuf_info->numFrags++; + p_mbuf_info->mbufSize += cesa_ocf_cur_ses->ivlen; + p_mbuf_info->pFrags = p_buf_info; + + p_buf_info->bufVirtPtr = ivp; + p_buf_info->bufSize = cesa_ocf_cur_ses->ivlen; + p_buf_info--; + + /* offsets */ + cesa_cmd->ivOffset = 0; + cesa_cmd->cryptoOffset += cesa_ocf_cur_ses->ivlen; + if(auth) { + cesa_cmd->macOffset += cesa_ocf_cur_ses->ivlen; + cesa_cmd->digestOffset += cesa_ocf_cur_ses->ivlen; + } + } + } + else { /* random IV */ + dprintk("%s,%d: random IV \n", __FILE__, __LINE__); + cesa_cmd->ivFromUser = 0; + + /* + * do we have to copy the IV back to the buffer ? + */ + /* in this mode the HAL will always copy the IV */ + /* given by the session to the ivOffset */ + if ((crd->crd_flags & CRD_F_IV_PRESENT) == 0) { + cesa_cmd->ivOffset = crd->crd_inject; + } + else { + /* if IV isn't copy, then how will the user know which IV did we use??? */ + printk("%s,%d: EINVAL\n", __FILE__, __LINE__); + goto p_error; + } + } + } + else { /* decrypt */ + dprintk(" decrypt \n"); + decrypt++; + cesa_cmd->sessionId = cesa_ocf_cur_ses->sid_decrypt; + + /* handle IV */ + if (crd->crd_flags & CRD_F_IV_EXPLICIT) { + dprintk("%s,%d: IV from USER \n", __FILE__, __LINE__); + /* append the IV buf to the mbuf */ + cesa_cmd->ivFromUser = 1; + p_mbuf_info->numFrags++; + p_mbuf_info->mbufSize += cesa_ocf_cur_ses->ivlen; + p_mbuf_info->pFrags = p_buf_info; + + p_buf_info->bufVirtPtr = crd->crd_iv; + p_buf_info->bufSize = cesa_ocf_cur_ses->ivlen; + p_buf_info--; + + /* offsets */ + cesa_cmd->ivOffset = 0; + cesa_cmd->cryptoOffset += cesa_ocf_cur_ses->ivlen; + if(auth) { + cesa_cmd->macOffset += cesa_ocf_cur_ses->ivlen; + cesa_cmd->digestOffset += cesa_ocf_cur_ses->ivlen; + } + } + else { + dprintk("%s,%d: IV inside the buffer \n", __FILE__, __LINE__); + cesa_cmd->ivFromUser = 0; + cesa_cmd->ivOffset = crd->crd_inject; + } + } + + } + /* Authentication */ + else if(crd->crd_alg == cesa_ocf_cur_ses->auth_alg) { + dprintk("%s,%d: Authentication \n", __FILE__, __LINE__); + auth++; + cesa_cmd->macOffset = crd->crd_skip; + cesa_cmd->macLength = crd->crd_len; + + /* digest + mac */ + cesa_cmd->digestOffset = crd->crd_inject; + } + else { + printk("%s,%d: Alg isn't supported by this session.\n", __FILE__, __LINE__); + goto p_error; + } + } + + dprintk("\n"); + dprintk("%s,%d: Sending Action: \n", __FILE__, __LINE__); + dprintk("%s,%d: IV from user: %d. IV offset %x \n", __FILE__, __LINE__, cesa_cmd->ivFromUser, cesa_cmd->ivOffset); + dprintk("%s,%d: crypt offset %x len %x \n", __FILE__, __LINE__, cesa_cmd->cryptoOffset, cesa_cmd->cryptoLength); + dprintk("%s,%d: Auth offset %x len %x \n", __FILE__, __LINE__, cesa_cmd->macOffset, cesa_cmd->macLength); + dprintk("%s,%d: set digest in offset %x . \n", __FILE__, __LINE__, cesa_cmd->digestOffset); + if(debug) { + mvCesaDebugMbuf("SRC BUFFER", cesa_cmd->pSrc, 0, cesa_cmd->pSrc->mbufSize); + } + + + /* send action to HAL */ + spin_lock_irqsave(&cesa_lock, flags); + status = mvCesaAction(cesa_cmd); + spin_unlock_irqrestore(&cesa_lock, flags); + + /* action not allowed */ + if(status == MV_NOT_ALLOWED) { +#ifdef CESA_OCF_SPLIT + /* if both encrypt and auth try to split */ + if(auth && (encrypt || decrypt)) { + MV_CESA_COMMAND *cesa_cmd_wa; + + /* malloc a new cesa process and init it */ + cesa_ocf_cmd_wa = kmalloc(sizeof(struct cesa_ocf_process), GFP_ATOMIC); + + if (cesa_ocf_cmd_wa == NULL) { + printk("%s,%d: ENOBUFS \n", __FILE__, __LINE__); + goto p_error; + } + memcpy(cesa_ocf_cmd_wa, cesa_ocf_cmd, sizeof(struct cesa_ocf_process)); + cesa_cmd_wa = &cesa_ocf_cmd_wa->cesa_cmd; + cesa_cmd_wa->pReqPrv = (void *)cesa_ocf_cmd_wa; + cesa_ocf_cmd_wa->need_cb = 0; + + /* break requests to two operation, first operation completion won't call callback */ + if((decrypt) && (cesa_ocf_cur_ses->auth_tn_decrypt)) { + cesa_cmd_wa->sessionId = cesa_ocf_cur_ses->frag_wa_auth; + cesa_cmd->sessionId = cesa_ocf_cur_ses->frag_wa_decrypt; + } + else if((decrypt) && !(cesa_ocf_cur_ses->auth_tn_decrypt)) { + cesa_cmd_wa->sessionId = cesa_ocf_cur_ses->frag_wa_decrypt; + cesa_cmd->sessionId = cesa_ocf_cur_ses->frag_wa_auth; + } + else if((encrypt) && (cesa_ocf_cur_ses->encrypt_tn_auth)) { + cesa_cmd_wa->sessionId = cesa_ocf_cur_ses->frag_wa_encrypt; + cesa_cmd->sessionId = cesa_ocf_cur_ses->frag_wa_auth; + } + else if((encrypt) && !(cesa_ocf_cur_ses->encrypt_tn_auth)){ + cesa_cmd_wa->sessionId = cesa_ocf_cur_ses->frag_wa_auth; + cesa_cmd->sessionId = cesa_ocf_cur_ses->frag_wa_encrypt; + } + else { + printk("%s,%d: Unsupporterd fragment wa mode \n", __FILE__, __LINE__); + goto p_error; + } + + /* send the 2 actions to the HAL */ + spin_lock_irqsave(&cesa_lock, flags); + status = mvCesaAction(cesa_cmd_wa); + spin_unlock_irqrestore(&cesa_lock, flags); + + if((status != MV_NO_MORE) && (status != MV_OK)) { + printk("%s,%d: cesa action failed, status = 0x%x\n", __FILE__, __LINE__, status); + goto p_error; + } + spin_lock_irqsave(&cesa_lock, flags); + status = mvCesaAction(cesa_cmd); + spin_unlock_irqrestore(&cesa_lock, flags); + + } + /* action not allowed and can't split */ + else +#endif + { + goto p_error; + } + } + + /* Hal Q is full, send again. This should never happen */ + if(status == MV_NO_RESOURCE) { + printk("%s,%d: cesa no more resources \n", __FILE__, __LINE__); + if(cesa_ocf_cmd) + kfree(cesa_ocf_cmd); + if(cesa_ocf_cmd_wa) + kfree(cesa_ocf_cmd_wa); + return ERESTART; + } + else if((status != MV_NO_MORE) && (status != MV_OK)) { + printk("%s,%d: cesa action failed, status = 0x%x\n", __FILE__, __LINE__, status); + goto p_error; + } + + +#ifdef CESA_OCF_POLLING + cesa_interrupt_polling(); +#endif + cesaTestTraceAdd(5); + + return 0; +p_error: + crp->crp_etype = EINVAL; + if(cesa_ocf_cmd) + kfree(cesa_ocf_cmd); + if(cesa_ocf_cmd_wa) + kfree(cesa_ocf_cmd_wa); + return EINVAL; +} + +/* + * cesa callback. + */ +static void +cesa_callback(unsigned long dummy) +{ + struct cesa_ocf_process *cesa_ocf_cmd = NULL; + struct cryptop *crp = NULL; + MV_CESA_RESULT result[MV_CESA_MAX_CHAN]; + int res_idx = 0,i; + MV_STATUS status; + + dprintk("%s()\n", __FUNCTION__); + +#ifdef CESA_OCF_TASKLET + disable_irq(cesa_device.irq); +#endif + while(MV_TRUE) { + + /* Get Ready requests */ + spin_lock(&cesa_lock); + status = mvCesaReadyGet(&result[res_idx]); + spin_unlock(&cesa_lock); + + cesaTestTraceAdd(2); + + if(status != MV_OK) { +#ifdef CESA_OCF_POLLING + if(status == MV_BUSY) { /* Fragment */ + cesa_interrupt_polling(); + return; + } +#endif + break; + } + res_idx++; + break; + } + + for(i = 0; i < res_idx; i++) { + + if(!result[i].pReqPrv) { + printk("%s,%d: warning private is NULL\n", __FILE__, __LINE__); + break; + } + + cesa_ocf_cmd = result[i].pReqPrv; + crp = cesa_ocf_cmd->crp; + + // ignore HMAC error. + //if(result->retCode) + // crp->crp_etype = EIO; + +#if defined(CESA_OCF_POLLING) + if(!cesa_ocf_cmd->need_cb){ + cesa_interrupt_polling(); + } +#endif + if(cesa_ocf_cmd->need_cb) { + if(debug) { + mvCesaDebugMbuf("DST BUFFER", cesa_ocf_cmd->cesa_cmd.pDst, 0, cesa_ocf_cmd->cesa_cmd.pDst->mbufSize); + } + crypto_done(crp); + } + kfree(cesa_ocf_cmd); + } +#ifdef CESA_OCF_TASKLET + enable_irq(cesa_device.irq); +#endif + + cesaTestTraceAdd(3); + + return; +} + +#ifdef CESA_OCF_POLLING +static void +cesa_interrupt_polling(void) +{ + u32 cause; + + dprintk("%s()\n", __FUNCTION__); + + /* Read cause register */ + do { + cause = MV_REG_READ(MV_CESA_ISR_CAUSE_REG); + cause &= MV_CESA_CAUSE_ACC_DMA_ALL_MASK; + + } while (cause == 0); + + /* clear interrupts */ + MV_REG_WRITE(MV_CESA_ISR_CAUSE_REG, 0); + + cesa_callback(0); + + return; +} + +#endif + +/* + * cesa Interrupt polling routine. + */ +static irqreturn_t +cesa_interrupt_handler(int irq, void *arg) +{ + u32 cause; + + dprintk("%s()\n", __FUNCTION__); + + cesaTestTraceAdd(0); + + /* Read cause register */ + cause = MV_REG_READ(MV_CESA_ISR_CAUSE_REG); + + if( (cause & MV_CESA_CAUSE_ACC_DMA_ALL_MASK) == 0) + { + /* Empty interrupt */ + dprintk("%s,%d: cesaTestReadyIsr: cause=0x%x\n", __FILE__, __LINE__, cause); + return IRQ_HANDLED; + } + + /* clear interrupts */ + MV_REG_WRITE(MV_CESA_ISR_CAUSE_REG, 0); + + cesaTestTraceAdd(1); +#ifdef CESA_OCF_TASKLET + tasklet_hi_schedule(&cesa_ocf_tasklet); +#else + cesa_callback(0); +#endif + return IRQ_HANDLED; +} + +/* + * Open a session. + */ +static int +/*cesa_ocf_newsession(void *arg, u_int32_t *sid, struct cryptoini *cri)*/ +cesa_ocf_newsession(device_t dev, u_int32_t *sid, struct cryptoini *cri) +{ + u32 status = 0, i; + u32 count = 0, auth = 0, encrypt =0; + struct cesa_ocf_data *cesa_ocf_cur_ses; + MV_CESA_OPEN_SESSION cesa_session; + MV_CESA_OPEN_SESSION *cesa_ses = &cesa_session; + + + dprintk("%s()\n", __FUNCTION__); + if (sid == NULL || cri == NULL) { + printk("%s,%d: EINVAL\n", __FILE__, __LINE__); + return EINVAL; + } + + /* leave first empty like in other implementations */ + for (i = 1; i < CESA_OCF_MAX_SES; i++) { + if (cesa_ocf_sessions[i] == NULL) + break; + } + + if(i >= CESA_OCF_MAX_SES) { + printk("%s,%d: no more sessions \n", __FILE__, __LINE__); + return EINVAL; + } + + cesa_ocf_sessions[i] = (struct cesa_ocf_data *) kmalloc(sizeof(struct cesa_ocf_data), GFP_ATOMIC); + if (cesa_ocf_sessions[i] == NULL) { + cesa_ocf_freesession(NULL, i); + printk("%s,%d: ENOBUFS \n", __FILE__, __LINE__); + return ENOBUFS; + } + dprintk("%s,%d: new session %d \n", __FILE__, __LINE__, i); + + *sid = i; + cesa_ocf_cur_ses = cesa_ocf_sessions[i]; + memset(cesa_ocf_cur_ses, 0, sizeof(struct cesa_ocf_data)); + cesa_ocf_cur_ses->sid_encrypt = -1; + cesa_ocf_cur_ses->sid_decrypt = -1; + cesa_ocf_cur_ses->frag_wa_encrypt = -1; + cesa_ocf_cur_ses->frag_wa_decrypt = -1; + cesa_ocf_cur_ses->frag_wa_auth = -1; + + /* init the session */ + memset(cesa_ses, 0, sizeof(MV_CESA_OPEN_SESSION)); + count = 1; + while (cri) { + if(count > 2) { + printk("%s,%d: don't support more then 2 operations\n", __FILE__, __LINE__); + goto error; + } + switch (cri->cri_alg) { + case CRYPTO_AES_CBC: + dprintk("%s,%d: (%d) AES CBC \n", __FILE__, __LINE__, count); + cesa_ocf_cur_ses->cipher_alg = cri->cri_alg; + cesa_ocf_cur_ses->ivlen = MV_CESA_AES_BLOCK_SIZE; + cesa_ses->cryptoAlgorithm = MV_CESA_CRYPTO_AES; + cesa_ses->cryptoMode = MV_CESA_CRYPTO_CBC; + if(cri->cri_klen/8 > MV_CESA_MAX_CRYPTO_KEY_LENGTH) { + printk("%s,%d: CRYPTO key too long.\n", __FILE__, __LINE__); + goto error; + } + memcpy(cesa_ses->cryptoKey, cri->cri_key, cri->cri_klen/8); + dprintk("%s,%d: key length %d \n", __FILE__, __LINE__, cri->cri_klen/8); + cesa_ses->cryptoKeyLength = cri->cri_klen/8; + encrypt += count; + break; + case CRYPTO_3DES_CBC: + dprintk("%s,%d: (%d) 3DES CBC \n", __FILE__, __LINE__, count); + cesa_ocf_cur_ses->cipher_alg = cri->cri_alg; + cesa_ocf_cur_ses->ivlen = MV_CESA_3DES_BLOCK_SIZE; + cesa_ses->cryptoAlgorithm = MV_CESA_CRYPTO_3DES; + cesa_ses->cryptoMode = MV_CESA_CRYPTO_CBC; + if(cri->cri_klen/8 > MV_CESA_MAX_CRYPTO_KEY_LENGTH) { + printk("%s,%d: CRYPTO key too long.\n", __FILE__, __LINE__); + goto error; + } + memcpy(cesa_ses->cryptoKey, cri->cri_key, cri->cri_klen/8); + cesa_ses->cryptoKeyLength = cri->cri_klen/8; + encrypt += count; + break; + case CRYPTO_DES_CBC: + dprintk("%s,%d: (%d) DES CBC \n", __FILE__, __LINE__, count); + cesa_ocf_cur_ses->cipher_alg = cri->cri_alg; + cesa_ocf_cur_ses->ivlen = MV_CESA_DES_BLOCK_SIZE; + cesa_ses->cryptoAlgorithm = MV_CESA_CRYPTO_DES; + cesa_ses->cryptoMode = MV_CESA_CRYPTO_CBC; + if(cri->cri_klen/8 > MV_CESA_MAX_CRYPTO_KEY_LENGTH) { + printk("%s,%d: CRYPTO key too long.\n", __FILE__, __LINE__); + goto error; + } + memcpy(cesa_ses->cryptoKey, cri->cri_key, cri->cri_klen/8); + cesa_ses->cryptoKeyLength = cri->cri_klen/8; + encrypt += count; + break; + case CRYPTO_MD5: + case CRYPTO_MD5_HMAC: + dprintk("%s,%d: (%d) %sMD5 CBC \n", __FILE__, __LINE__, count, (cri->cri_alg != CRYPTO_MD5)? "H-":" "); + cesa_ocf_cur_ses->auth_alg = cri->cri_alg; + cesa_ocf_cur_ses->digestlen = (cri->cri_alg == CRYPTO_MD5)? MV_CESA_MD5_DIGEST_SIZE : 12; + cesa_ses->macMode = (cri->cri_alg == CRYPTO_MD5)? MV_CESA_MAC_MD5 : MV_CESA_MAC_HMAC_MD5; + if(cri->cri_klen/8 > MV_CESA_MAX_CRYPTO_KEY_LENGTH) { + printk("%s,%d: MAC key too long. \n", __FILE__, __LINE__); + goto error; + } + cesa_ses->macKeyLength = cri->cri_klen/8; + memcpy(cesa_ses->macKey, cri->cri_key, cri->cri_klen/8); + cesa_ses->digestSize = cesa_ocf_cur_ses->digestlen; + auth += count; + break; + case CRYPTO_SHA1: + case CRYPTO_SHA1_HMAC: + dprintk("%s,%d: (%d) %sSHA1 CBC \n", __FILE__, __LINE__, count, (cri->cri_alg != CRYPTO_SHA1)? "H-":" "); + cesa_ocf_cur_ses->auth_alg = cri->cri_alg; + cesa_ocf_cur_ses->digestlen = (cri->cri_alg == CRYPTO_SHA1)? MV_CESA_SHA1_DIGEST_SIZE : 12; + cesa_ses->macMode = (cri->cri_alg == CRYPTO_SHA1)? MV_CESA_MAC_SHA1 : MV_CESA_MAC_HMAC_SHA1; + if(cri->cri_klen/8 > MV_CESA_MAX_CRYPTO_KEY_LENGTH) { + printk("%s,%d: MAC key too long. \n", __FILE__, __LINE__); + goto error; + } + cesa_ses->macKeyLength = cri->cri_klen/8; + memcpy(cesa_ses->macKey, cri->cri_key, cri->cri_klen/8); + cesa_ses->digestSize = cesa_ocf_cur_ses->digestlen; + auth += count; + break; + default: + printk("%s,%d: unknown algo 0x%x\n", __FILE__, __LINE__, cri->cri_alg); + goto error; + } + cri = cri->cri_next; + count++; + } + + if((encrypt > 2) || (auth > 2)) { + printk("%s,%d: session mode is not supported.\n", __FILE__, __LINE__); + goto error; + } + /* create new sessions in HAL */ + if(encrypt) { + cesa_ses->operation = MV_CESA_CRYPTO_ONLY; + /* encrypt session */ + if(auth == 1) { + cesa_ses->operation = MV_CESA_MAC_THEN_CRYPTO; + } + else if(auth == 2) { + cesa_ses->operation = MV_CESA_CRYPTO_THEN_MAC; + cesa_ocf_cur_ses->encrypt_tn_auth = 1; + } + else { + cesa_ses->operation = MV_CESA_CRYPTO_ONLY; + } + cesa_ses->direction = MV_CESA_DIR_ENCODE; + status = mvCesaSessionOpen(cesa_ses, &cesa_ocf_cur_ses->sid_encrypt); + if(status != MV_OK) { + printk("%s,%d: Can't open new session - status = 0x%x\n", __FILE__, __LINE__, status); + goto error; + } + /* decrypt session */ + if( cesa_ses->operation == MV_CESA_MAC_THEN_CRYPTO ) { + cesa_ses->operation = MV_CESA_CRYPTO_THEN_MAC; + } + else if( cesa_ses->operation == MV_CESA_CRYPTO_THEN_MAC ) { + cesa_ses->operation = MV_CESA_MAC_THEN_CRYPTO; + } + cesa_ses->direction = MV_CESA_DIR_DECODE; + status = mvCesaSessionOpen(cesa_ses, &cesa_ocf_cur_ses->sid_decrypt); + if(status != MV_OK) { + printk("%s,%d: Can't open new session - status = 0x%x\n", __FILE__, __LINE__, status); + goto error; + } + + /* preapre one action sessions for case we will need to split an action */ +#ifdef CESA_OCF_SPLIT + if(( cesa_ses->operation == MV_CESA_MAC_THEN_CRYPTO ) || + ( cesa_ses->operation == MV_CESA_CRYPTO_THEN_MAC )) { + /* open one session for encode and one for decode */ + cesa_ses->operation = MV_CESA_CRYPTO_ONLY; + cesa_ses->direction = MV_CESA_DIR_ENCODE; + status = mvCesaSessionOpen(cesa_ses, &cesa_ocf_cur_ses->frag_wa_encrypt); + if(status != MV_OK) { + printk("%s,%d: Can't open new session - status = 0x%x\n", __FILE__, __LINE__, status); + goto error; + } + + cesa_ses->direction = MV_CESA_DIR_DECODE; + status = mvCesaSessionOpen(cesa_ses, &cesa_ocf_cur_ses->frag_wa_decrypt); + if(status != MV_OK) { + printk("%s,%d: Can't open new session - status = 0x%x\n", __FILE__, __LINE__, status); + goto error; + } + /* open one session for auth */ + cesa_ses->operation = MV_CESA_MAC_ONLY; + cesa_ses->direction = MV_CESA_DIR_ENCODE; + status = mvCesaSessionOpen(cesa_ses, &cesa_ocf_cur_ses->frag_wa_auth); + if(status != MV_OK) { + printk("%s,%d: Can't open new session - status = 0x%x\n", __FILE__, __LINE__, status); + goto error; + } + } +#endif + } + else { /* only auth */ + cesa_ses->operation = MV_CESA_MAC_ONLY; + cesa_ses->direction = MV_CESA_DIR_ENCODE; + status = mvCesaSessionOpen(cesa_ses, &cesa_ocf_cur_ses->sid_encrypt); + if(status != MV_OK) { + printk("%s,%d: Can't open new session - status = 0x%x\n", __FILE__, __LINE__, status); + goto error; + } + } + + return 0; +error: + cesa_ocf_freesession(NULL, *sid); + return EINVAL; + +} + + +/* + * Free a session. + */ +static int +cesa_ocf_freesession(device_t dev, u_int64_t tid) +{ + struct cesa_ocf_data *cesa_ocf_cur_ses; + u_int32_t sid = CRYPTO_SESID2LID(tid); + //unsigned long flags; + + dprintk("%s() %d \n", __FUNCTION__, sid); + if ( (sid >= CESA_OCF_MAX_SES) || (cesa_ocf_sessions[sid] == NULL) ) { + printk("%s,%d: EINVAL can't free session %d \n", __FILE__, __LINE__, sid); + return(EINVAL); + } + + /* Silently accept and return */ + if (sid == 0) + return(0); + + /* release session from HAL */ + cesa_ocf_cur_ses = cesa_ocf_sessions[sid]; + if (cesa_ocf_cur_ses->sid_encrypt != -1) { + mvCesaSessionClose(cesa_ocf_cur_ses->sid_encrypt); + } + if (cesa_ocf_cur_ses->sid_decrypt != -1) { + mvCesaSessionClose(cesa_ocf_cur_ses->sid_decrypt); + } + if (cesa_ocf_cur_ses->frag_wa_encrypt != -1) { + mvCesaSessionClose(cesa_ocf_cur_ses->frag_wa_encrypt); + } + if (cesa_ocf_cur_ses->frag_wa_decrypt != -1) { + mvCesaSessionClose(cesa_ocf_cur_ses->frag_wa_decrypt); + } + if (cesa_ocf_cur_ses->frag_wa_auth != -1) { + mvCesaSessionClose(cesa_ocf_cur_ses->frag_wa_auth); + } + + kfree(cesa_ocf_cur_ses); + cesa_ocf_sessions[sid] = NULL; + + return 0; +} + + +/* TDMA Window setup */ + +static void __init +setup_tdma_mbus_windows(struct cesa_dev *dev) +{ + int i; + + for (i = 0; i < 4; i++) { + writel(0, dev->reg + WINDOW_BASE(i)); + writel(0, dev->reg + WINDOW_CTRL(i)); + } + + for (i = 0; i < dev->plat_data->dram->num_cs; i++) { + struct mbus_dram_window *cs = dev->plat_data->dram->cs + i; + writel( + ((cs->size - 1) & 0xffff0000) | + (cs->mbus_attr << 8) | + (dev->plat_data->dram->mbus_dram_target_id << 4) | 1, + dev->reg + WINDOW_CTRL(i) + ); + writel(cs->base, dev->reg + WINDOW_BASE(i)); + } +} + +/* + * our driver startup and shutdown routines + */ +static int +mv_cesa_ocf_init(struct platform_device *pdev) +{ +#if defined(CONFIG_MV78200) || defined(CONFIG_MV632X) + if (MV_FALSE == mvSocUnitIsMappedToThisCpu(CESA)) + { + dprintk("CESA is not mapped to this CPU\n"); + return -ENODEV; + } +#endif + + dprintk("%s\n", __FUNCTION__); + memset(&mv_cesa_dev, 0, sizeof(mv_cesa_dev)); + softc_device_init(&mv_cesa_dev, "MV CESA", 0, mv_cesa_methods); + cesa_ocf_id = crypto_get_driverid(softc_get_device(&mv_cesa_dev),CRYPTOCAP_F_HARDWARE); + + if (cesa_ocf_id < 0) + panic("MV CESA crypto device cannot initialize!"); + + dprintk("%s,%d: cesa ocf device id is %d \n", __FILE__, __LINE__, cesa_ocf_id); + + /* CESA unit is auto power on off */ +#if 0 + if (MV_FALSE == mvCtrlPwrClckGet(CESA_UNIT_ID,0)) + { + printk("\nWarning CESA %d is Powered Off\n",0); + return EINVAL; + } +#endif + + memset(&cesa_device, 0, sizeof(struct cesa_dev)); + /* Get the IRQ, and crypto memory regions */ + { + struct resource *res; + res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "sram"); + + if (!res) + return -ENXIO; + + cesa_device.sram = ioremap(res->start, res->end - res->start + 1); + res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "regs"); + + if (!res) { + iounmap(cesa_device.sram); + return -ENXIO; + } + cesa_device.reg = ioremap(res->start, res->end - res->start + 1); + cesa_device.irq = platform_get_irq(pdev, 0); + cesa_device.plat_data = pdev->dev.platform_data; + setup_tdma_mbus_windows(&cesa_device); + + } + + + if( MV_OK != mvCesaInit(CESA_OCF_MAX_SES*5, CESA_Q_SIZE, cesa_device.reg, + NULL) ) { + printk("%s,%d: mvCesaInit Failed. \n", __FILE__, __LINE__); + return EINVAL; + } + + /* clear and unmask Int */ + MV_REG_WRITE( MV_CESA_ISR_CAUSE_REG, 0); +#ifndef CESA_OCF_POLLING + MV_REG_WRITE( MV_CESA_ISR_MASK_REG, MV_CESA_CAUSE_ACC_DMA_MASK); +#endif +#ifdef CESA_OCF_TASKLET + tasklet_init(&cesa_ocf_tasklet, cesa_callback, (unsigned int) 0); +#endif + /* register interrupt */ + if( request_irq( cesa_device.irq, cesa_interrupt_handler, + (IRQF_DISABLED) , "cesa", &cesa_ocf_id) < 0) { + printk("%s,%d: cannot assign irq %x\n", __FILE__, __LINE__, cesa_device.reg); + return EINVAL; + } + + + memset(cesa_ocf_sessions, 0, sizeof(struct cesa_ocf_data *) * CESA_OCF_MAX_SES); + +#define REGISTER(alg) \ + crypto_register(cesa_ocf_id, alg, 0,0) + REGISTER(CRYPTO_AES_CBC); + REGISTER(CRYPTO_DES_CBC); + REGISTER(CRYPTO_3DES_CBC); + REGISTER(CRYPTO_MD5); + REGISTER(CRYPTO_MD5_HMAC); + REGISTER(CRYPTO_SHA1); + REGISTER(CRYPTO_SHA1_HMAC); +#undef REGISTER + + return 0; +} + +static void +mv_cesa_ocf_exit(struct platform_device *pdev) +{ + dprintk("%s()\n", __FUNCTION__); + + crypto_unregister_all(cesa_ocf_id); + cesa_ocf_id = -1; + iounmap(cesa_device.reg); + iounmap(cesa_device.sram); + free_irq(cesa_device.irq, NULL); + + /* mask and clear Int */ + MV_REG_WRITE( MV_CESA_ISR_MASK_REG, 0); + MV_REG_WRITE( MV_CESA_ISR_CAUSE_REG, 0); + + + if( MV_OK != mvCesaFinish() ) { + printk("%s,%d: mvCesaFinish Failed. \n", __FILE__, __LINE__); + return; + } +} + + +void cesa_ocf_debug(void) +{ + +#ifdef CESA_OCF_TRACE_DEBUG + { + int i, j; + j = cesaTestTraceIdx; + mvOsPrintf("No Type rCause iCause Proc Isr Res Time pReady pProc pEmpty\n"); + for(i=0; i= _1G) + { + mvOsOutput("%3dGB ", size / _1G); + size %= _1G; + if(size) + mvOsOutput("+"); + } + if(size >= _1M ) + { + mvOsOutput("%3dMB ", size / _1M); + size %= _1M; + if(size) + mvOsOutput("+"); + } + if(size >= _1K) + { + mvOsOutput("%3dKB ", size / _1K); + size %= _1K; + if(size) + mvOsOutput("+"); + } + if(size > 0) + { + mvOsOutput("%3dB ", size); + } +} + +/******************************************************************************* +* mvHexToBin - Convert hex to binary +* +* DESCRIPTION: +* This function Convert hex to binary. +* +* INPUT: +* pHexStr - hex buffer pointer. +* size - Size to convert. +* +* OUTPUT: +* pBin - Binary buffer pointer. +* +* RETURN: +* None. +* +*******************************************************************************/ +MV_VOID mvHexToBin(const char* pHexStr, MV_U8* pBin, int size) +{ + int j, i; + char tmp[3]; + MV_U8 byte; + + for(j=0, i=0; j> 1; + result++; + } + return result; +} + + diff --git a/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/common/mvCommon.h b/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/common/mvCommon.h new file mode 100644 index 0000000000..c8e9ce1001 --- /dev/null +++ b/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/common/mvCommon.h @@ -0,0 +1,308 @@ +/******************************************************************************* +Copyright (C) Marvell International Ltd. and its affiliates + +This software file (the "File") is owned and distributed by Marvell +International Ltd. and/or its affiliates ("Marvell") under the following +alternative licensing terms. Once you have made an election to distribute the +File under one of the following license alternatives, please (i) delete this +introductory statement regarding license alternatives, (ii) delete the two +license alternatives that you have not elected to use and (iii) preserve the +Marvell copyright notice above. + +******************************************************************************** +Marvell Commercial License Option + +If you received this File from Marvell and you have entered into a commercial +license agreement (a "Commercial License") with Marvell, the File is licensed +to you under the terms of the applicable Commercial License. + +******************************************************************************** +Marvell GPL License Option + +If you received this File from Marvell, you may opt to use, redistribute and/or +modify this File in accordance with the terms and conditions of the General +Public License Version 2, June 1991 (the "GPL License"), a copy of which is +available along with the File in the license.txt file or by writing to the Free +Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or +on the worldwide web at http://www.gnu.org/licenses/gpl.txt. + +THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED +WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY +DISCLAIMED. The GPL License provides additional details about this warranty +disclaimer. +******************************************************************************** +Marvell BSD License Option + +If you received this File from Marvell, you may opt to use, redistribute and/or +modify this File under the following licensing terms. +Redistribution and use in source and binary forms, with or without modification, +are permitted provided that the following conditions are met: + + * Redistributions of source code must retain the above copyright notice, + this list of conditions and the following disclaimer. + + * Redistributions in binary form must reproduce the above copyright + notice, this list of conditions and the following disclaimer in the + documentation and/or other materials provided with the distribution. + + * Neither the name of Marvell nor the names of its contributors may be + used to endorse or promote products derived from this software without + specific prior written permission. + +THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND +ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED +WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE +DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR +ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES +(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; +LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON +ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS +SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + +*******************************************************************************/ + + + +#ifndef __INCmvCommonh +#define __INCmvCommonh + +#include "mvTypes.h" + +/* Swap tool */ + +/* 16bit nibble swap. For example 0x1234 -> 0x2143 */ +#define MV_NIBBLE_SWAP_16BIT(X) (((X&0xf) << 4) | \ + ((X&0xf0) >> 4) | \ + ((X&0xf00) << 4) | \ + ((X&0xf000) >> 4)) + +/* 32bit nibble swap. For example 0x12345678 -> 0x21436587 */ +#define MV_NIBBLE_SWAP_32BIT(X) (((X&0xf) << 4) | \ + ((X&0xf0) >> 4) | \ + ((X&0xf00) << 4) | \ + ((X&0xf000) >> 4) | \ + ((X&0xf0000) << 4) | \ + ((X&0xf00000) >> 4) | \ + ((X&0xf000000) << 4) | \ + ((X&0xf0000000) >> 4)) + +/* 16bit byte swap. For example 0x1122 -> 0x2211 */ +#define MV_BYTE_SWAP_16BIT(X) ((((X)&0xff)<<8) | (((X)&0xff00)>>8)) + +/* 32bit byte swap. For example 0x11223344 -> 0x44332211 */ +#define MV_BYTE_SWAP_32BIT(X) ((((X)&0xff)<<24) | \ + (((X)&0xff00)<<8) | \ + (((X)&0xff0000)>>8) | \ + (((X)&0xff000000)>>24)) + +/* 64bit byte swap. For example 0x11223344.55667788 -> 0x88776655.44332211 */ +#define MV_BYTE_SWAP_64BIT(X) ((l64) ((((X)&0xffULL)<<56) | \ + (((X)&0xff00ULL)<<40) | \ + (((X)&0xff0000ULL)<<24) | \ + (((X)&0xff000000ULL)<<8) | \ + (((X)&0xff00000000ULL)>>8) | \ + (((X)&0xff0000000000ULL)>>24) | \ + (((X)&0xff000000000000ULL)>>40) | \ + (((X)&0xff00000000000000ULL)>>56))) + +/* Endianess macros. */ +#if defined(MV_CPU_LE) + #define MV_16BIT_LE(X) (X) + #define MV_32BIT_LE(X) (X) + #define MV_64BIT_LE(X) (X) + #define MV_16BIT_BE(X) MV_BYTE_SWAP_16BIT(X) + #define MV_32BIT_BE(X) MV_BYTE_SWAP_32BIT(X) + #define MV_64BIT_BE(X) MV_BYTE_SWAP_64BIT(X) +#elif defined(MV_CPU_BE) + #define MV_16BIT_LE(X) MV_BYTE_SWAP_16BIT(X) + #define MV_32BIT_LE(X) MV_BYTE_SWAP_32BIT(X) + #define MV_64BIT_LE(X) MV_BYTE_SWAP_64BIT(X) + #define MV_16BIT_BE(X) (X) + #define MV_32BIT_BE(X) (X) + #define MV_64BIT_BE(X) (X) +#else + #error "CPU endianess isn't defined!\n" +#endif + + +/* Bit field definitions */ +#define NO_BIT 0x00000000 +#define BIT0 0x00000001 +#define BIT1 0x00000002 +#define BIT2 0x00000004 +#define BIT3 0x00000008 +#define BIT4 0x00000010 +#define BIT5 0x00000020 +#define BIT6 0x00000040 +#define BIT7 0x00000080 +#define BIT8 0x00000100 +#define BIT9 0x00000200 +#define BIT10 0x00000400 +#define BIT11 0x00000800 +#define BIT12 0x00001000 +#define BIT13 0x00002000 +#define BIT14 0x00004000 +#define BIT15 0x00008000 +#define BIT16 0x00010000 +#define BIT17 0x00020000 +#define BIT18 0x00040000 +#define BIT19 0x00080000 +#define BIT20 0x00100000 +#define BIT21 0x00200000 +#define BIT22 0x00400000 +#define BIT23 0x00800000 +#define BIT24 0x01000000 +#define BIT25 0x02000000 +#define BIT26 0x04000000 +#define BIT27 0x08000000 +#define BIT28 0x10000000 +#define BIT29 0x20000000 +#define BIT30 0x40000000 +#define BIT31 0x80000000 + +/* Handy sizes */ +#define _1K 0x00000400 +#define _2K 0x00000800 +#define _4K 0x00001000 +#define _8K 0x00002000 +#define _16K 0x00004000 +#define _32K 0x00008000 +#define _64K 0x00010000 +#define _128K 0x00020000 +#define _256K 0x00040000 +#define _512K 0x00080000 + +#define _1M 0x00100000 +#define _2M 0x00200000 +#define _4M 0x00400000 +#define _8M 0x00800000 +#define _16M 0x01000000 +#define _32M 0x02000000 +#define _64M 0x04000000 +#define _128M 0x08000000 +#define _256M 0x10000000 +#define _512M 0x20000000 + +#define _1G 0x40000000 +#define _2G 0x80000000 + +/* Tclock and Sys clock define */ +#define _100MHz 100000000 +#define _125MHz 125000000 +#define _133MHz 133333334 +#define _150MHz 150000000 +#define _160MHz 160000000 +#define _166MHz 166666667 +#define _175MHz 175000000 +#define _178MHz 178000000 +#define _183MHz 183333334 +#define _187MHz 187000000 +#define _192MHz 192000000 +#define _194MHz 194000000 +#define _200MHz 200000000 +#define _233MHz 233333334 +#define _250MHz 250000000 +#define _266MHz 266666667 +#define _300MHz 300000000 + +/* For better address window table readability */ +#define EN MV_TRUE +#define DIS MV_FALSE +#define N_A -1 /* Not applicable */ + +/* Cache configuration options for memory (DRAM, SRAM, ... ) */ + +/* Memory uncached, HW or SW cache coherency is not needed */ +#define MV_UNCACHED 0 +/* Memory cached, HW cache coherency supported in WriteThrough mode */ +#define MV_CACHE_COHER_HW_WT 1 +/* Memory cached, HW cache coherency supported in WriteBack mode */ +#define MV_CACHE_COHER_HW_WB 2 +/* Memory cached, No HW cache coherency, Cache coherency must be in SW */ +#define MV_CACHE_COHER_SW 3 + + +/* Macro for testing aligment. Positive if number is NOT aligned */ +#define MV_IS_NOT_ALIGN(number, align) ((number) & ((align) - 1)) + +/* Macro for alignment up. For example, MV_ALIGN_UP(0x0330, 0x20) = 0x0340 */ +#define MV_ALIGN_UP(number, align) \ +(((number) & ((align) - 1)) ? (((number) + (align)) & ~((align)-1)) : (number)) + +/* Macro for alignment down. For example, MV_ALIGN_UP(0x0330, 0x20) = 0x0320 */ +#define MV_ALIGN_DOWN(number, align) ((number) & ~((align)-1)) + +/* This macro returns absolute value */ +#define MV_ABS(number) (((int)(number) < 0) ? -(int)(number) : (int)(number)) + + +/* Bit fields manipulation macros */ + +/* An integer word which its 'x' bit is set */ +#define MV_BIT_MASK(bitNum) (1 << (bitNum) ) + +/* Checks wheter bit 'x' in integer word is set */ +#define MV_BIT_CHECK(word, bitNum) ( (word) & MV_BIT_MASK(bitNum) ) + +/* Clear (reset) bit 'x' in integer word (RMW - Read-Modify-Write) */ +#define MV_BIT_CLEAR(word, bitNum) ( (word) &= ~(MV_BIT_MASK(bitNum)) ) + +/* Set bit 'x' in integer word (RMW) */ +#define MV_BIT_SET(word, bitNum) ( (word) |= MV_BIT_MASK(bitNum) ) + +/* Invert bit 'x' in integer word (RMW) */ +#define MV_BIT_INV(word, bitNum) ( (word) ^= MV_BIT_MASK(bitNum) ) + +/* Get the min between 'a' or 'b' */ +#define MV_MIN(a,b) (((a) < (b)) ? (a) : (b)) + +/* Get the max between 'a' or 'b' */ +#define MV_MAX(a,b) (((a) < (b)) ? (b) : (a)) + +/* Temporary */ +#define mvOsDivide(num, div) \ +({ \ + int i=0, rem=(num); \ + \ + while(rem >= (div)) \ + { \ + rem -= (div); \ + i++; \ + } \ + (i); \ +}) + +/* Temporary */ +#define mvOsReminder(num, div) \ +({ \ + int rem = (num); \ + \ + while(rem >= (div)) \ + rem -= (div); \ + (rem); \ +}) + +#define MV_IP_QUAD(ipAddr) ((ipAddr >> 24) & 0xFF), ((ipAddr >> 16) & 0xFF), \ + ((ipAddr >> 8) & 0xFF), ((ipAddr >> 0) & 0xFF) + +#define MV_IS_POWER_OF_2(num) ((num != 0) && ((num & (num - 1)) == 0)) + +#ifndef MV_ASMLANGUAGE +/* mvCommon API list */ + +MV_VOID mvHexToBin(const char* pHexStr, MV_U8* pBin, int size); +void mvAsciiToHex(const char* asciiStr, char* hexStr); +void mvBinToHex(const MV_U8* bin, char* hexStr, int size); +void mvBinToAscii(const MV_U8* bin, char* asciiStr, int size); + +MV_STATUS mvMacStrToHex(const char* macStr, MV_U8* macHex); +MV_STATUS mvMacHexToStr(MV_U8* macHex, char* macStr); +void mvSizePrint(MV_U32); + +MV_U32 mvLog2(MV_U32 num); + +#endif /* MV_ASMLANGUAGE */ + + +#endif /* __INCmvCommonh */ diff --git a/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/common/mvDebug.c b/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/common/mvDebug.c new file mode 100644 index 0000000000..087f36d325 --- /dev/null +++ b/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/common/mvDebug.c @@ -0,0 +1,326 @@ +/******************************************************************************* +Copyright (C) Marvell International Ltd. and its affiliates + +This software file (the "File") is owned and distributed by Marvell +International Ltd. and/or its affiliates ("Marvell") under the following +alternative licensing terms. Once you have made an election to distribute the +File under one of the following license alternatives, please (i) delete this +introductory statement regarding license alternatives, (ii) delete the two +license alternatives that you have not elected to use and (iii) preserve the +Marvell copyright notice above. + +******************************************************************************** +Marvell Commercial License Option + +If you received this File from Marvell and you have entered into a commercial +license agreement (a "Commercial License") with Marvell, the File is licensed +to you under the terms of the applicable Commercial License. + +******************************************************************************** +Marvell GPL License Option + +If you received this File from Marvell, you may opt to use, redistribute and/or +modify this File in accordance with the terms and conditions of the General +Public License Version 2, June 1991 (the "GPL License"), a copy of which is +available along with the File in the license.txt file or by writing to the Free +Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or +on the worldwide web at http://www.gnu.org/licenses/gpl.txt. + +THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED +WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY +DISCLAIMED. The GPL License provides additional details about this warranty +disclaimer. +******************************************************************************** +Marvell BSD License Option + +If you received this File from Marvell, you may opt to use, redistribute and/or +modify this File under the following licensing terms. +Redistribution and use in source and binary forms, with or without modification, +are permitted provided that the following conditions are met: + + * Redistributions of source code must retain the above copyright notice, + this list of conditions and the following disclaimer. + + * Redistributions in binary form must reproduce the above copyright + notice, this list of conditions and the following disclaimer in the + documentation and/or other materials provided with the distribution. + + * Neither the name of Marvell nor the names of its contributors may be + used to endorse or promote products derived from this software without + specific prior written permission. + +THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND +ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED +WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE +DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR +ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES +(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; +LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON +ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS +SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + +*******************************************************************************/ + + + +/* includes */ +#include "mvOs.h" +#include "mv802_3.h" +#include "mvCommon.h" +#include "mvDebug.h" + +/* Global variables effect on behave MV_DEBUG_PRINT and MV_DEBUG_CODE macros + * mvDebug - map of bits (one for each module) bit=1 means enable + * debug code and messages for this module + * mvModuleDebug - array of 32 bits varables one for each module + */ +MV_U32 mvDebug = 0; +MV_U32 mvDebugModules[MV_MODULE_MAX]; + +/* Init mvModuleDebug array to default values */ +void mvDebugInit(void) +{ + int bit; + + mvDebug = 0; + for(bit=0; bit 0) + { + mvOsPrintf("%08x: ", memAddr); + i = 0; + /* 32 bytes in the line */ + while(i < 32) + { + if(memAddr >= (MV_U32)addr) + { + switch(access) + { + case 1: + if( memAddr == CPU_PHY_MEM(memAddr) ) + { + mvOsPrintf("%02x ", MV_MEMIO8_READ(memAddr)); + } + else + { + mvOsPrintf("%02x ", *((MV_U8*)memAddr)); + } + break; + + case 2: + if( memAddr == CPU_PHY_MEM(memAddr) ) + { + mvOsPrintf("%04x ", MV_MEMIO16_READ(memAddr)); + } + else + { + mvOsPrintf("%04x ", *((MV_U16*)memAddr)); + } + break; + + case 4: + if( memAddr == CPU_PHY_MEM(memAddr) ) + { + mvOsPrintf("%08x ", MV_MEMIO32_READ(memAddr)); + } + else + { + mvOsPrintf("%08x ", *((MV_U32*)memAddr)); + } + break; + } + } + else + { + for(j=0; j<(access*2+1); j++) + mvOsPrintf(" "); + } + i += access; + memAddr += access; + size -= access; + if(size <= 0) + break; + } + mvOsPrintf("\n"); + } +} + +void mvDebugPrintBufInfo(BUF_INFO* pBufInfo, int size, int access) +{ + if(pBufInfo == NULL) + { + mvOsPrintf("\n!!! pBufInfo = NULL\n"); + return; + } + mvOsPrintf("\n*** pBufInfo=0x%x, cmdSts=0x%08x, pBuf=0x%x, bufSize=%d\n", + (unsigned int)pBufInfo, + (unsigned int)pBufInfo->cmdSts, + (unsigned int)pBufInfo->pBuff, + (unsigned int)pBufInfo->bufSize); + mvOsPrintf("pData=0x%x, byteCnt=%d, pNext=0x%x, uInfo1=0x%x, uInfo2=0x%x\n", + (unsigned int)pBufInfo->pData, + (unsigned int)pBufInfo->byteCnt, + (unsigned int)pBufInfo->pNextBufInfo, + (unsigned int)pBufInfo->userInfo1, + (unsigned int)pBufInfo->userInfo2); + if(pBufInfo->pData != NULL) + { + if(size > pBufInfo->byteCnt) + size = pBufInfo->byteCnt; + mvDebugMemDump(pBufInfo->pData, size, access); + } +} + +void mvDebugPrintPktInfo(MV_PKT_INFO* pPktInfo, int size, int access) +{ + int frag, len; + + if(pPktInfo == NULL) + { + mvOsPrintf("\n!!! pPktInfo = NULL\n"); + return; + } + mvOsPrintf("\npPkt=%p, stat=0x%08x, numFr=%d, size=%d, pFr=%p, osInfo=0x%lx\n", + pPktInfo, pPktInfo->status, pPktInfo->numFrags, pPktInfo->pktSize, + pPktInfo->pFrags, pPktInfo->osInfo); + + for(frag=0; fragnumFrags; frag++) + { + mvOsPrintf("#%2d. bufVirt=%p, bufSize=%d\n", + frag, pPktInfo->pFrags[frag].bufVirtPtr, + pPktInfo->pFrags[frag].bufSize); + if(size > 0) + { + len = MV_MIN((int)pPktInfo->pFrags[frag].bufSize, size); + mvDebugMemDump(pPktInfo->pFrags[frag].bufVirtPtr, len, access); + size -= len; + } + } + +} + +void mvDebugPrintIpAddr(MV_U32 ipAddr) +{ + mvOsPrintf("%d.%d.%d.%d", ((ipAddr >> 24) & 0xFF), ((ipAddr >> 16) & 0xFF), + ((ipAddr >> 8) & 0xFF), ((ipAddr >> 0) & 0xFF)); +} + +void mvDebugPrintMacAddr(const MV_U8* pMacAddr) +{ + int i; + + mvOsPrintf("%02x", (unsigned int)pMacAddr[0]); + for(i=1; ibegin = 0; + pTimeEntry->count = count; + pTimeEntry->end = 0; + pTimeEntry->left = pTimeEntry->count; + pTimeEntry->total = 0; + pTimeEntry->min = 0xFFFFFFFF; + pTimeEntry->max = 0x0; + strncpy(pTimeEntry->name, pName, sizeof(pTimeEntry->name)-1); + pTimeEntry->name[sizeof(pTimeEntry->name)-1] = '\0'; +} + +/* Print out MV_DEBUG_TIMES entry */ +void mvDebugPrintTimeEntry(MV_DEBUG_TIMES* pTimeEntry, MV_BOOL isTitle) +{ + int num; + + if(isTitle == MV_TRUE) + mvOsPrintf("Event NumOfEvents TotalTime Average Min Max\n"); + + num = pTimeEntry->count-pTimeEntry->left; + if(num > 0) + { + mvOsPrintf("%-11s %6u 0x%08lx %6lu %6lu %6lu\n", + pTimeEntry->name, num, pTimeEntry->total, pTimeEntry->total/num, + pTimeEntry->min, pTimeEntry->max); + } +} + +/* Update MV_DEBUG_TIMES entry */ +void mvDebugUpdateTimeEntry(MV_DEBUG_TIMES* pTimeEntry) +{ + MV_U32 delta; + + if(pTimeEntry->left > 0) + { + if(pTimeEntry->end <= pTimeEntry->begin) + { + delta = pTimeEntry->begin - pTimeEntry->end; + } + else + { + delta = ((MV_U32)0x10000 - pTimeEntry->end) + pTimeEntry->begin; + } + pTimeEntry->total += delta; + + if(delta < pTimeEntry->min) + pTimeEntry->min = delta; + + if(delta > pTimeEntry->max) + pTimeEntry->max = delta; + + pTimeEntry->left--; + } +} + diff --git a/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/common/mvDebug.h b/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/common/mvDebug.h new file mode 100644 index 0000000000..e4975bed5c --- /dev/null +++ b/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/common/mvDebug.h @@ -0,0 +1,178 @@ +/******************************************************************************* +Copyright (C) Marvell International Ltd. and its affiliates + +This software file (the "File") is owned and distributed by Marvell +International Ltd. and/or its affiliates ("Marvell") under the following +alternative licensing terms. Once you have made an election to distribute the +File under one of the following license alternatives, please (i) delete this +introductory statement regarding license alternatives, (ii) delete the two +license alternatives that you have not elected to use and (iii) preserve the +Marvell copyright notice above. + +******************************************************************************** +Marvell Commercial License Option + +If you received this File from Marvell and you have entered into a commercial +license agreement (a "Commercial License") with Marvell, the File is licensed +to you under the terms of the applicable Commercial License. + +******************************************************************************** +Marvell GPL License Option + +If you received this File from Marvell, you may opt to use, redistribute and/or +modify this File in accordance with the terms and conditions of the General +Public License Version 2, June 1991 (the "GPL License"), a copy of which is +available along with the File in the license.txt file or by writing to the Free +Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or +on the worldwide web at http://www.gnu.org/licenses/gpl.txt. + +THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED +WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY +DISCLAIMED. The GPL License provides additional details about this warranty +disclaimer. +******************************************************************************** +Marvell BSD License Option + +If you received this File from Marvell, you may opt to use, redistribute and/or +modify this File under the following licensing terms. +Redistribution and use in source and binary forms, with or without modification, +are permitted provided that the following conditions are met: + + * Redistributions of source code must retain the above copyright notice, + this list of conditions and the following disclaimer. + + * Redistributions in binary form must reproduce the above copyright + notice, this list of conditions and the following disclaimer in the + documentation and/or other materials provided with the distribution. + + * Neither the name of Marvell nor the names of its contributors may be + used to endorse or promote products derived from this software without + specific prior written permission. + +THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND +ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED +WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE +DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR +ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES +(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; +LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON +ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS +SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + +*******************************************************************************/ + + + +#ifndef __INCmvDebugh +#define __INCmvDebugh + +/* includes */ +#include "mvTypes.h" + +typedef enum +{ + MV_MODULE_INVALID = -1, + MV_MODULE_ETH = 0, + MV_MODULE_IDMA, + MV_MODULE_XOR, + MV_MODULE_TWASI, + MV_MODULE_MGI, + MV_MODULE_USB, + MV_MODULE_CESA, + + MV_MODULE_MAX +}MV_MODULE_ID; + +/* Define generic flags useful for most of modules */ +#define MV_DEBUG_FLAG_ALL (0) +#define MV_DEBUG_FLAG_INIT (1 << 0) +#define MV_DEBUG_FLAG_RX (1 << 1) +#define MV_DEBUG_FLAG_TX (1 << 2) +#define MV_DEBUG_FLAG_ERR (1 << 3) +#define MV_DEBUG_FLAG_TRACE (1 << 4) +#define MV_DEBUG_FLAG_DUMP (1 << 5) +#define MV_DEBUG_FLAG_CACHE (1 << 6) +#define MV_DEBUG_FLAG_IOCTL (1 << 7) +#define MV_DEBUG_FLAG_STATS (1 << 8) + +extern MV_U32 mvDebug; +extern MV_U32 mvDebugModules[MV_MODULE_MAX]; + +#ifdef MV_DEBUG +# define MV_DEBUG_PRINT(module, flags, msg) mvOsPrintf msg +# define MV_DEBUG_CODE(module, flags, code) code +#elif defined(MV_RT_DEBUG) +# define MV_DEBUG_PRINT(module, flags, msg) \ + if( (mvDebug & (1<<(module))) && \ + ((mvDebugModules[(module)] & (flags)) == (flags)) ) \ + mvOsPrintf msg +# define MV_DEBUG_CODE(module, flags, code) \ + if( (mvDebug & (1<<(module))) && \ + ((mvDebugModules[(module)] & (flags)) == (flags)) ) \ + code +#else +# define MV_DEBUG_PRINT(module, flags, msg) +# define MV_DEBUG_CODE(module, flags, code) +#endif + + + +/* typedefs */ + +/* time measurement structure used to check how much time pass between + * two points + */ +typedef struct { + char name[20]; /* name of the entry */ + unsigned long begin; /* time measured on begin point */ + unsigned long end; /* time measured on end point */ + unsigned long total; /* Accumulated time */ + unsigned long left; /* The rest measurement actions */ + unsigned long count; /* Maximum measurement actions */ + unsigned long min; /* Minimum time from begin to end */ + unsigned long max; /* Maximum time from begin to end */ +} MV_DEBUG_TIMES; + + +/* mvDebug.h API list */ + +/****** Error Recording ******/ + +/* Dump memory in specific format: + * address: X1X1X1X1 X2X2X2X2 ... X8X8X8X8 + */ +void mvDebugMemDump(void* addr, int size, int access); + +void mvDebugPrintBufInfo(BUF_INFO* pBufInfo, int size, int access); + +void mvDebugPrintPktInfo(MV_PKT_INFO* pPktInfo, int size, int access); + +void mvDebugPrintIpAddr(MV_U32 ipAddr); + +void mvDebugPrintMacAddr(const MV_U8* pMacAddr); + +/**** There are three functions deals with MV_DEBUG_TIMES structure ****/ + +/* Reset MV_DEBUG_TIMES entry */ +void mvDebugResetTimeEntry(MV_DEBUG_TIMES* pTimeEntry, int count, char* name); + +/* Update MV_DEBUG_TIMES entry */ +void mvDebugUpdateTimeEntry(MV_DEBUG_TIMES* pTimeEntry); + +/* Print out MV_DEBUG_TIMES entry */ +void mvDebugPrintTimeEntry(MV_DEBUG_TIMES* pTimeEntry, MV_BOOL isTitle); + + +/******** General ***********/ + +/* Change value of mvDebugPrint global variable */ + +void mvDebugInit(void); +void mvDebugModuleEnable(MV_MODULE_ID module, MV_BOOL isEnable); +void mvDebugModuleSetFlags(MV_MODULE_ID module, MV_U32 flags); +void mvDebugModuleClearFlags(MV_MODULE_ID module, MV_U32 flags); + + +#endif /* __INCmvDebug.h */ + diff --git a/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/common/mvDeviceId.h b/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/common/mvDeviceId.h new file mode 100644 index 0000000000..478209407e --- /dev/null +++ b/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/common/mvDeviceId.h @@ -0,0 +1,225 @@ +/******************************************************************************* +Copyright (C) Marvell International Ltd. and its affiliates + +This software file (the "File") is owned and distributed by Marvell +International Ltd. and/or its affiliates ("Marvell") under the following +alternative licensing terms. Once you have made an election to distribute the +File under one of the following license alternatives, please (i) delete this +introductory statement regarding license alternatives, (ii) delete the two +license alternatives that you have not elected to use and (iii) preserve the +Marvell copyright notice above. + +******************************************************************************** +Marvell Commercial License Option + +If you received this File from Marvell and you have entered into a commercial +license agreement (a "Commercial License") with Marvell, the File is licensed +to you under the terms of the applicable Commercial License. + +******************************************************************************** +Marvell GPL License Option + +If you received this File from Marvell, you may opt to use, redistribute and/or +modify this File in accordance with the terms and conditions of the General +Public License Version 2, June 1991 (the "GPL License"), a copy of which is +available along with the File in the license.txt file or by writing to the Free +Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or +on the worldwide web at http://www.gnu.org/licenses/gpl.txt. + +THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED +WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY +DISCLAIMED. The GPL License provides additional details about this warranty +disclaimer. +******************************************************************************** +Marvell BSD License Option + +If you received this File from Marvell, you may opt to use, redistribute and/or +modify this File under the following licensing terms. +Redistribution and use in source and binary forms, with or without modification, +are permitted provided that the following conditions are met: + + * Redistributions of source code must retain the above copyright notice, + this list of conditions and the following disclaimer. + + * Redistributions in binary form must reproduce the above copyright + notice, this list of conditions and the following disclaimer in the + documentation and/or other materials provided with the distribution. + + * Neither the name of Marvell nor the names of its contributors may be + used to endorse or promote products derived from this software without + specific prior written permission. + +THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND +ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED +WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE +DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR +ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES +(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; +LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON +ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS +SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + +*******************************************************************************/ + +#ifndef __INCmvDeviceIdh +#define __INCmvDeviceIdh + +#ifdef __cplusplus +extern "C" { +#endif /* __cplusplus */ + +/* defines */ +#define MARVELL_VEN_ID 0x11ab + +/* Disco-3 */ +#define MV64460_DEV_ID 0x6480 +#define MV64460B_DEV_ID 0x6485 +#define MV64430_DEV_ID 0x6420 + +/* Disco-5 */ +#define MV64560_DEV_ID 0x6450 + +/* Disco-6 */ +#define MV64660_DEV_ID 0x6460 + +/* Orion */ +#define MV_1181_DEV_ID 0x1181 +#define MV_5181_DEV_ID 0x5181 +#define MV_5281_DEV_ID 0x5281 +#define MV_5182_DEV_ID 0x5182 +#define MV_8660_DEV_ID 0x8660 +#define MV_5180_DEV_ID 0x5180 +#define MV_5082_DEV_ID 0x5082 +#define MV_1281_DEV_ID 0x1281 +#define MV_6082_DEV_ID 0x6082 +#define MV_6183_DEV_ID 0x6183 +#define MV_6183L_DEV_ID 0x6083 + +#define MV_5281_D0_REV 0x4 +#define MV_5281_D0_ID ((MV_5281_DEV_ID << 16) | MV_5281_D0_REV) +#define MV_5281_D0_NAME "88F5281 D0" + +#define MV_5281_D1_REV 0x5 +#define MV_5281_D1_ID ((MV_5281_DEV_ID << 16) | MV_5281_D1_REV) +#define MV_5281_D1_NAME "88F5281 D1" + +#define MV_5281_D2_REV 0x6 +#define MV_5281_D2_ID ((MV_5281_DEV_ID << 16) | MV_5281_D2_REV) +#define MV_5281_D2_NAME "88F5281 D2" + + +#define MV_5181L_A0_REV 0x8 /* need for PCIE Er */ +#define MV_5181_A1_REV 0x1 /* for USB Er ..*/ +#define MV_5181_B0_REV 0x2 +#define MV_5181_B1_REV 0x3 +#define MV_5182_A1_REV 0x1 +#define MV_5180N_B1_REV 0x3 +#define MV_5181L_A0_ID ((MV_5181_DEV_ID << 16) | MV_5181L_A0_REV) + + + +/* kw */ +#define MV_6281_DEV_ID 0x6281 +#define MV_6192_DEV_ID 0x6192 +#define MV_6190_DEV_ID 0x6190 +#define MV_6180_DEV_ID 0x6180 + +#define MV_6281_A0_REV 0x2 +#define MV_6281_A0_ID ((MV_6281_DEV_ID << 16) | MV_6281_A0_REV) +#define MV_6281_A0_NAME "88F6281 A0" + +#define MV_6192_A0_REV 0x2 +#define MV_6192_A0_ID ((MV_6192_DEV_ID << 16) | MV_6192_A0_REV) +#define MV_6192_A0_NAME "88F6192 A0" + +#define MV_6190_A0_REV 0x2 +#define MV_6190_A0_ID ((MV_6190_DEV_ID << 16) | MV_6190_A0_REV) +#define MV_6190_A0_NAME "88F6190 A0" + +#define MV_6180_A0_REV 0x2 +#define MV_6180_A0_ID ((MV_6180_DEV_ID << 16) | MV_6180_A0_REV) +#define MV_6180_A0_NAME "88F6180 A0" + +#define MV_6281_A1_REV 0x3 +#define MV_6281_A1_ID ((MV_6281_DEV_ID << 16) | MV_6281_A1_REV) +#define MV_6281_A1_NAME "88F6281 A1" + +#define MV_6192_A1_REV 0x3 +#define MV_6192_A1_ID ((MV_6192_DEV_ID << 16) | MV_6192_A1_REV) +#define MV_6192_A1_NAME "88F6192 A1" + +#define MV_6190_A1_REV 0x3 +#define MV_6190_A1_ID ((MV_6190_DEV_ID << 16) | MV_6190_A1_REV) +#define MV_6190_A1_NAME "88F6190 A1" + +#define MV_6180_A1_REV 0x3 +#define MV_6180_A1_ID ((MV_6180_DEV_ID << 16) | MV_6180_A1_REV) +#define MV_6180_A1_NAME "88F6180 A1" + +#define MV_88F6XXX_A0_REV 0x2 +#define MV_88F6XXX_A1_REV 0x3 +/* Disco-Duo */ +#define MV_78XX0_ZY_DEV_ID 0x6381 +#define MV_78XX0_ZY_NAME "MV78X00" + +#define MV_78XX0_Z0_REV 0x1 +#define MV_78XX0_Z0_ID ((MV_78XX0_ZY_DEV_ID << 16) | MV_78XX0_Z0_REV) +#define MV_78XX0_Z0_NAME "78X00 Z0" + +#define MV_78XX0_Y0_REV 0x2 +#define MV_78XX0_Y0_ID ((MV_78XX0_ZY_DEV_ID << 16) | MV_78XX0_Y0_REV) +#define MV_78XX0_Y0_NAME "78X00 Y0" + +#define MV_78XX0_DEV_ID 0x7800 +#define MV_78XX0_NAME "MV78X00" + +#define MV_76100_DEV_ID 0x7610 +#define MV_78200_DEV_ID 0x7820 +#define MV_78100_DEV_ID 0x7810 +#define MV_78XX0_A0_REV 0x1 +#define MV_78XX0_A1_REV 0x2 + +#define MV_76100_NAME "MV76100" +#define MV_78100_NAME "MV78100" +#define MV_78200_NAME "MV78200" + +#define MV_76100_A0_ID ((MV_76100_DEV_ID << 16) | MV_78XX0_A0_REV) +#define MV_78100_A0_ID ((MV_78100_DEV_ID << 16) | MV_78XX0_A0_REV) +#define MV_78200_A0_ID ((MV_78200_DEV_ID << 16) | MV_78XX0_A0_REV) + +#define MV_76100_A1_ID ((MV_76100_DEV_ID << 16) | MV_78XX0_A1_REV) +#define MV_78100_A1_ID ((MV_78100_DEV_ID << 16) | MV_78XX0_A1_REV) +#define MV_78200_A1_ID ((MV_78200_DEV_ID << 16) | MV_78XX0_A1_REV) + +#define MV_76100_A0_NAME "MV76100 A0" +#define MV_78100_A0_NAME "MV78100 A0" +#define MV_78200_A0_NAME "MV78200 A0" +#define MV_78XX0_A0_NAME "MV78XX0 A0" + +#define MV_76100_A1_NAME "MV76100 A1" +#define MV_78100_A1_NAME "MV78100 A1" +#define MV_78200_A1_NAME "MV78200 A1" +#define MV_78XX0_A1_NAME "MV78XX0 A1" + +/*MV88F632X family*/ +#define MV_6321_DEV_ID 0x6321 +#define MV_6322_DEV_ID 0x6322 +#define MV_6323_DEV_ID 0x6323 + +#define MV_6321_NAME "88F6321" +#define MV_6322_NAME "88F6322" +#define MV_6323_NAME "88F6323" + +#define MV_632X_A1_REV 0x2 + +#define MV_6321_A1_ID ((MV_6321_DEV_ID << 16) | MV_632X_A1_REV) +#define MV_6322_A1_ID ((MV_6322_DEV_ID << 16) | MV_632X_A1_REV) +#define MV_6323_A1_ID ((MV_6323_DEV_ID << 16) | MV_632X_A1_REV) + +#define MV_6321_A1_NAME "88F6321 A1" +#define MV_6322_A1_NAME "88F6322 A1" +#define MV_6323_A1_NAME "88F6323 A1" + + +#endif /* __INCmvDeviceIdh */ diff --git a/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/common/mvHalVer.h b/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/common/mvHalVer.h new file mode 100644 index 0000000000..1849198569 --- /dev/null +++ b/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/common/mvHalVer.h @@ -0,0 +1,73 @@ +/******************************************************************************* +Copyright (C) Marvell International Ltd. and its affiliates + +This software file (the "File") is owned and distributed by Marvell +International Ltd. and/or its affiliates ("Marvell") under the following +alternative licensing terms. Once you have made an election to distribute the +File under one of the following license alternatives, please (i) delete this +introductory statement regarding license alternatives, (ii) delete the two +license alternatives that you have not elected to use and (iii) preserve the +Marvell copyright notice above. + +******************************************************************************** +Marvell Commercial License Option + +If you received this File from Marvell and you have entered into a commercial +license agreement (a "Commercial License") with Marvell, the File is licensed +to you under the terms of the applicable Commercial License. + +******************************************************************************** +Marvell GPL License Option + +If you received this File from Marvell, you may opt to use, redistribute and/or +modify this File in accordance with the terms and conditions of the General +Public License Version 2, June 1991 (the "GPL License"), a copy of which is +available along with the File in the license.txt file or by writing to the Free +Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or +on the worldwide web at http://www.gnu.org/licenses/gpl.txt. + +THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED +WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY +DISCLAIMED. The GPL License provides additional details about this warranty +disclaimer. +******************************************************************************** +Marvell BSD License Option + +If you received this File from Marvell, you may opt to use, redistribute and/or +modify this File under the following licensing terms. +Redistribution and use in source and binary forms, with or without modification, +are permitted provided that the following conditions are met: + + * Redistributions of source code must retain the above copyright notice, + this list of conditions and the following disclaimer. + + * Redistributions in binary form must reproduce the above copyright + notice, this list of conditions and the following disclaimer in the + documentation and/or other materials provided with the distribution. + + * Neither the name of Marvell nor the names of its contributors may be + used to endorse or promote products derived from this software without + specific prior written permission. + +THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND +ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED +WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE +DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR +ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES +(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; +LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON +ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS +SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + +*******************************************************************************/ + + +#ifndef __INCmvHalVerh +#define __INCmvHalVerh + +/* Defines */ +#define MV_HAL_VERSION "FEROCEON_HAL_3_1_7" +#define MV_RELEASE_BASELINE "SoCandControllers_FEROCEON_RELEASE_7_9_2009_KW_4_3_4_DD_2_1_4_6183_1_1_4" + +#endif /* __INCmvHalVerh */ \ No newline at end of file diff --git a/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/common/mvStack.c b/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/common/mvStack.c new file mode 100644 index 0000000000..41ca7cebaa --- /dev/null +++ b/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/common/mvStack.c @@ -0,0 +1,100 @@ +/******************************************************************************* +* Copyright 2003, Marvell Semiconductor Israel LTD. * +* THIS CODE CONTAINS CONFIDENTIAL INFORMATION OF MARVELL. * +* NO RIGHTS ARE GRANTED HEREIN UNDER ANY PATENT, MASK WORK RIGHT OR COPYRIGHT * +* OF MARVELL OR ANY THIRD PARTY. MARVELL RESERVES THE RIGHT AT ITS SOLE * +* DISCRETION TO REQUEST THAT THIS CODE BE IMMEDIATELY RETURNED TO MARVELL. * +* THIS CODE IS PROVIDED "AS IS". MARVELL MAKES NO WARRANTIES, EXPRESSED, * +* IMPLIED OR OTHERWISE, REGARDING ITS ACCURACY, COMPLETENESS OR PERFORMANCE. * +* * +* MARVELL COMPRISES MARVELL TECHNOLOGY GROUP LTD. (MTGL) AND ITS SUBSIDIARIES, * +* MARVELL INTERNATIONAL LTD. (MIL), MARVELL TECHNOLOGY, INC. (MTI), MARVELL * +* SEMICONDUCTOR, INC. (MSI), MARVELL ASIA PTE LTD. (MAPL), MARVELL JAPAN K.K. * +* (MJKK), MARVELL SEMICONDUCTOR ISRAEL LTD (MSIL). * +******************************************************************************** +* mvQueue.c +* +* FILENAME: $Workfile: mvStack.c $ +* REVISION: $Revision: 1.1 $ +* LAST UPDATE: $Modtime: $ +* +* DESCRIPTION: +* This file implements simple Stack LIFO functionality. +*******************************************************************************/ + +/* includes */ +#include "mvOs.h" +#include "mvTypes.h" +#include "mvDebug.h" +#include "mvStack.h" + +/* defines */ + + +/* Public functions */ + + +/* Purpose: Create new stack + * Inputs: + * - MV_U32 noOfElements - maximum number of elements in the stack. + * Each element 4 bytes size + * Return: void* - pointer to created stack. + */ +void* mvStackCreate(int numOfElements) +{ + MV_STACK* pStack; + MV_U32* pStackElements; + + pStack = (MV_STACK*)mvOsMalloc(sizeof(MV_STACK)); + pStackElements = (MV_U32*)mvOsMalloc(numOfElements*sizeof(MV_U32)); + if( (pStack == NULL) || (pStackElements == NULL) ) + { + mvOsPrintf("mvStack: Can't create new stack\n"); + return NULL; + } + memset(pStackElements, 0, numOfElements*sizeof(MV_U32)); + pStack->numOfElements = numOfElements; + pStack->stackIdx = 0; + pStack->stackElements = pStackElements; + + return pStack; +} + +/* Purpose: Delete existing stack + * Inputs: + * - void* stackHndl - Stack handle as returned by "mvStackCreate()" function + * + * Return: MV_STATUS MV_NOT_FOUND - Failure. StackHandle is not valid. + * MV_OK - Success. + */ +MV_STATUS mvStackDelete(void* stackHndl) +{ + MV_STACK* pStack = (MV_STACK*)stackHndl; + + if( (pStack == NULL) || (pStack->stackElements == NULL) ) + return MV_NOT_FOUND; + + mvOsFree(pStack->stackElements); + mvOsFree(pStack); + + return MV_OK; +} + + +/* PrintOut status of the stack */ +void mvStackStatus(void* stackHndl, MV_BOOL isPrintElements) +{ + int i; + MV_STACK* pStack = (MV_STACK*)stackHndl; + + mvOsPrintf("StackHandle=%p, pElements=%p, numElements=%d, stackIdx=%d\n", + stackHndl, pStack->stackElements, pStack->numOfElements, + pStack->stackIdx); + if(isPrintElements == MV_TRUE) + { + for(i=0; istackIdx; i++) + { + mvOsPrintf("%3d. Value=0x%x\n", i, pStack->stackElements[i]); + } + } +} diff --git a/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/common/mvStack.h b/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/common/mvStack.h new file mode 100644 index 0000000000..e247e61c2d --- /dev/null +++ b/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/common/mvStack.h @@ -0,0 +1,140 @@ +/******************************************************************************* +* Copyright 2003, Marvell Semiconductor Israel LTD. * +* THIS CODE CONTAINS CONFIDENTIAL INFORMATION OF MARVELL. * +* NO RIGHTS ARE GRANTED HEREIN UNDER ANY PATENT, MASK WORK RIGHT OR COPYRIGHT * +* OF MARVELL OR ANY THIRD PARTY. MARVELL RESERVES THE RIGHT AT ITS SOLE * +* DISCRETION TO REQUEST THAT THIS CODE BE IMMEDIATELY RETURNED TO MARVELL. * +* THIS CODE IS PROVIDED "AS IS". MARVELL MAKES NO WARRANTIES, EXPRESSED, * +* IMPLIED OR OTHERWISE, REGARDING ITS ACCURACY, COMPLETENESS OR PERFORMANCE. * +* * +* MARVELL COMPRISES MARVELL TECHNOLOGY GROUP LTD. (MTGL) AND ITS SUBSIDIARIES, * +* MARVELL INTERNATIONAL LTD. (MIL), MARVELL TECHNOLOGY, INC. (MTI), MARVELL * +* SEMICONDUCTOR, INC. (MSI), MARVELL ASIA PTE LTD. (MAPL), MARVELL JAPAN K.K. * +* (MJKK), MARVELL SEMICONDUCTOR ISRAEL LTD (MSIL). * +******************************************************************************** +* mvStack.h - Header File for : +* +* FILENAME: $Workfile: mvStack.h $ +* REVISION: $Revision: 1.1 $ +* LAST UPDATE: $Modtime: $ +* +* DESCRIPTION: +* This file defines simple Stack (LIFO) functionality. +* +*******************************************************************************/ + +#ifndef __mvStack_h__ +#define __mvStack_h__ + + +/* includes */ +#include "mvTypes.h" + + +/* defines */ + + +/* typedefs */ +/* Data structure describes general purpose Stack */ +typedef struct +{ + int stackIdx; + int numOfElements; + MV_U32* stackElements; +} MV_STACK; + +static INLINE MV_BOOL mvStackIsFull(void* stackHndl) +{ + MV_STACK* pStack = (MV_STACK*)stackHndl; + + if(pStack->stackIdx == pStack->numOfElements) + return MV_TRUE; + + return MV_FALSE; +} + +static INLINE MV_BOOL mvStackIsEmpty(void* stackHndl) +{ + MV_STACK* pStack = (MV_STACK*)stackHndl; + + if(pStack->stackIdx == 0) + return MV_TRUE; + + return MV_FALSE; +} +/* Purpose: Push new element to stack + * Inputs: + * - void* stackHndl - Stack handle as returned by "mvStackCreate()" function. + * - MV_U32 value - New element. + * + * Return: MV_STATUS MV_FULL - Failure. Stack is full. + * MV_OK - Success. Element is put to stack. + */ +static INLINE void mvStackPush(void* stackHndl, MV_U32 value) +{ + MV_STACK* pStack = (MV_STACK*)stackHndl; + +#ifdef MV_RT_DEBUG + if(pStack->stackIdx == pStack->numOfElements) + { + mvOsPrintf("mvStackPush: Stack is FULL\n"); + return; + } +#endif /* MV_RT_DEBUG */ + + pStack->stackElements[pStack->stackIdx] = value; + pStack->stackIdx++; +} + +/* Purpose: Pop element from the top of stack and copy it to "pValue" + * Inputs: + * - void* stackHndl - Stack handle as returned by "mvStackCreate()" function. + * - MV_U32 value - Element in the top of stack. + * + * Return: MV_STATUS MV_EMPTY - Failure. Stack is empty. + * MV_OK - Success. Element is removed from the stack and + * copied to pValue argument + */ +static INLINE MV_U32 mvStackPop(void* stackHndl) +{ + MV_STACK* pStack = (MV_STACK*)stackHndl; + +#ifdef MV_RT_DEBUG + if(pStack->stackIdx == 0) + { + mvOsPrintf("mvStackPop: Stack is EMPTY\n"); + return 0; + } +#endif /* MV_RT_DEBUG */ + + pStack->stackIdx--; + return pStack->stackElements[pStack->stackIdx]; +} + +static INLINE int mvStackIndex(void* stackHndl) +{ + MV_STACK* pStack = (MV_STACK*)stackHndl; + + return pStack->stackIdx; +} + +static INLINE int mvStackFreeElements(void* stackHndl) +{ + MV_STACK* pStack = (MV_STACK*)stackHndl; + + return (pStack->numOfElements - pStack->stackIdx); +} + +/* mvStack.h API list */ + +/* Create new Stack */ +void* mvStackCreate(int numOfElements); + +/* Delete existing stack */ +MV_STATUS mvStackDelete(void* stackHndl); + +/* Print status of the stack */ +void mvStackStatus(void* stackHndl, MV_BOOL isPrintElements); + +#endif /* __mvStack_h__ */ + diff --git a/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/common/mvTypes.h b/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/common/mvTypes.h new file mode 100644 index 0000000000..de212a141d --- /dev/null +++ b/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/common/mvTypes.h @@ -0,0 +1,245 @@ +/******************************************************************************* +Copyright (C) Marvell International Ltd. and its affiliates + +This software file (the "File") is owned and distributed by Marvell +International Ltd. and/or its affiliates ("Marvell") under the following +alternative licensing terms. Once you have made an election to distribute the +File under one of the following license alternatives, please (i) delete this +introductory statement regarding license alternatives, (ii) delete the two +license alternatives that you have not elected to use and (iii) preserve the +Marvell copyright notice above. + +******************************************************************************** +Marvell Commercial License Option + +If you received this File from Marvell and you have entered into a commercial +license agreement (a "Commercial License") with Marvell, the File is licensed +to you under the terms of the applicable Commercial License. + +******************************************************************************** +Marvell GPL License Option + +If you received this File from Marvell, you may opt to use, redistribute and/or +modify this File in accordance with the terms and conditions of the General +Public License Version 2, June 1991 (the "GPL License"), a copy of which is +available along with the File in the license.txt file or by writing to the Free +Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or +on the worldwide web at http://www.gnu.org/licenses/gpl.txt. + +THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED +WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY +DISCLAIMED. The GPL License provides additional details about this warranty +disclaimer. +******************************************************************************** +Marvell BSD License Option + +If you received this File from Marvell, you may opt to use, redistribute and/or +modify this File under the following licensing terms. +Redistribution and use in source and binary forms, with or without modification, +are permitted provided that the following conditions are met: + + * Redistributions of source code must retain the above copyright notice, + this list of conditions and the following disclaimer. + + * Redistributions in binary form must reproduce the above copyright + notice, this list of conditions and the following disclaimer in the + documentation and/or other materials provided with the distribution. + + * Neither the name of Marvell nor the names of its contributors may be + used to endorse or promote products derived from this software without + specific prior written permission. + +THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND +ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED +WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE +DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR +ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES +(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; +LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON +ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS +SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + +*******************************************************************************/ + + +#ifndef __INCmvTypesh +#define __INCmvTypesh + +/* Defines */ + +/* The following is a list of Marvell status */ +#define MV_ERROR (-1) +#define MV_OK (0x00) /* Operation succeeded */ +#define MV_FAIL (0x01) /* Operation failed */ +#define MV_BAD_VALUE (0x02) /* Illegal value (general) */ +#define MV_OUT_OF_RANGE (0x03) /* The value is out of range */ +#define MV_BAD_PARAM (0x04) /* Illegal parameter in function called */ +#define MV_BAD_PTR (0x05) /* Illegal pointer value */ +#define MV_BAD_SIZE (0x06) /* Illegal size */ +#define MV_BAD_STATE (0x07) /* Illegal state of state machine */ +#define MV_SET_ERROR (0x08) /* Set operation failed */ +#define MV_GET_ERROR (0x09) /* Get operation failed */ +#define MV_CREATE_ERROR (0x0A) /* Fail while creating an item */ +#define MV_NOT_FOUND (0x0B) /* Item not found */ +#define MV_NO_MORE (0x0C) /* No more items found */ +#define MV_NO_SUCH (0x0D) /* No such item */ +#define MV_TIMEOUT (0x0E) /* Time Out */ +#define MV_NO_CHANGE (0x0F) /* Parameter(s) is already in this value */ +#define MV_NOT_SUPPORTED (0x10) /* This request is not support */ +#define MV_NOT_IMPLEMENTED (0x11) /* Request supported but not implemented */ +#define MV_NOT_INITIALIZED (0x12) /* The item is not initialized */ +#define MV_NO_RESOURCE (0x13) /* Resource not available (memory ...) */ +#define MV_FULL (0x14) /* Item is full (Queue or table etc...) */ +#define MV_EMPTY (0x15) /* Item is empty (Queue or table etc...) */ +#define MV_INIT_ERROR (0x16) /* Error occured while INIT process */ +#define MV_HW_ERROR (0x17) /* Hardware error */ +#define MV_TX_ERROR (0x18) /* Transmit operation not succeeded */ +#define MV_RX_ERROR (0x19) /* Recieve operation not succeeded */ +#define MV_NOT_READY (0x1A) /* The other side is not ready yet */ +#define MV_ALREADY_EXIST (0x1B) /* Tried to create existing item */ +#define MV_OUT_OF_CPU_MEM (0x1C) /* Cpu memory allocation failed. */ +#define MV_NOT_STARTED (0x1D) /* Not started yet */ +#define MV_BUSY (0x1E) /* Item is busy. */ +#define MV_TERMINATE (0x1F) /* Item terminates it's work. */ +#define MV_NOT_ALIGNED (0x20) /* Wrong alignment */ +#define MV_NOT_ALLOWED (0x21) /* Operation NOT allowed */ +#define MV_WRITE_PROTECT (0x22) /* Write protected */ + + +#define MV_INVALID (int)(-1) + +#define MV_FALSE 0 +#define MV_TRUE (!(MV_FALSE)) + + +#ifndef NULL +#define NULL ((void*)0) +#endif + + +#ifndef MV_ASMLANGUAGE +/* typedefs */ + +typedef char MV_8; +typedef unsigned char MV_U8; + +typedef int MV_32; +typedef unsigned int MV_U32; + +typedef short MV_16; +typedef unsigned short MV_U16; + +#ifdef MV_PPC64 +typedef long MV_64; +typedef unsigned long MV_U64; +#else +typedef long long MV_64; +typedef unsigned long long MV_U64; +#endif + +typedef long MV_LONG; /* 32/64 */ +typedef unsigned long MV_ULONG; /* 32/64 */ + +typedef int MV_STATUS; +typedef int MV_BOOL; +typedef void MV_VOID; +typedef float MV_FLOAT; + +typedef int (*MV_FUNCPTR) (void); /* ptr to function returning int */ +typedef void (*MV_VOIDFUNCPTR) (void); /* ptr to function returning void */ +typedef double (*MV_DBLFUNCPTR) (void); /* ptr to function returning double*/ +typedef float (*MV_FLTFUNCPTR) (void); /* ptr to function returning float */ + +typedef MV_U32 MV_KHZ; +typedef MV_U32 MV_MHZ; +typedef MV_U32 MV_HZ; + + +/* This enumerator describes the set of commands that can be applied on */ +/* an engine (e.g. IDMA, XOR). Appling a comman depends on the current */ +/* status (see MV_STATE enumerator) */ +/* Start can be applied only when status is IDLE */ +/* Stop can be applied only when status is IDLE, ACTIVE or PAUSED */ +/* Pause can be applied only when status is ACTIVE */ +/* Restart can be applied only when status is PAUSED */ +typedef enum _mvCommand +{ + MV_START, /* Start */ + MV_STOP, /* Stop */ + MV_PAUSE, /* Pause */ + MV_RESTART /* Restart */ +} MV_COMMAND; + +/* This enumerator describes the set of state conditions. */ +/* Moving from one state to other is stricted. */ +typedef enum _mvState +{ + MV_IDLE, + MV_ACTIVE, + MV_PAUSED, + MV_UNDEFINED_STATE +} MV_STATE; + + +/* This structure describes address space window. Window base can be */ +/* 64 bit, window size up to 4GB */ +typedef struct _mvAddrWin +{ + MV_U32 baseLow; /* 32bit base low */ + MV_U32 baseHigh; /* 32bit base high */ + MV_U32 size; /* 32bit size */ +}MV_ADDR_WIN; + +/* This binary enumerator describes protection attribute status */ +typedef enum _mvProtRight +{ + ALLOWED, /* Protection attribute allowed */ + FORBIDDEN /* Protection attribute forbidden */ +}MV_PROT_RIGHT; + +/* Unified struct for Rx and Tx packet operations. The user is required to */ +/* be familier only with Tx/Rx descriptor command status. */ +typedef struct _bufInfo +{ + MV_U32 cmdSts; /* Tx/Rx command status */ + MV_U16 byteCnt; /* Size of valid data in the buffer */ + MV_U16 bufSize; /* Total size of the buffer */ + MV_U8 *pBuff; /* Pointer to Buffer */ + MV_U8 *pData; /* Pointer to data in the Buffer */ + MV_U32 userInfo1; /* Tx/Rx attached user information 1 */ + MV_U32 userInfo2; /* Tx/Rx attached user information 2 */ + struct _bufInfo *pNextBufInfo; /* Next buffer in packet */ +} BUF_INFO; + +/* This structure contains information describing one of buffers + * (fragments) they are built Ethernet packet. + */ +typedef struct +{ + MV_U8* bufVirtPtr; + MV_ULONG bufPhysAddr; + MV_U32 bufSize; + MV_U32 dataSize; + MV_U32 memHandle; + MV_32 bufAddrShift; +} MV_BUF_INFO; + +/* This structure contains information describing Ethernet packet. + * The packet can be divided for few buffers (fragments) + */ +typedef struct +{ + MV_ULONG osInfo; + MV_BUF_INFO *pFrags; + MV_U32 status; + MV_U16 pktSize; + MV_U16 numFrags; + MV_U32 ownerId; + MV_U32 fragIP; +} MV_PKT_INFO; + +#endif /* MV_ASMLANGUAGE */ + +#endif /* __INCmvTypesh */ + diff --git a/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/dbg-trace.c b/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/dbg-trace.c new file mode 100644 index 0000000000..644fd02dac --- /dev/null +++ b/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/dbg-trace.c @@ -0,0 +1,110 @@ +#include +#include +#include +#include "dbg-trace.h" + +#define TRACE_ARR_LEN 800 +#define STR_LEN 128 +struct trace { + struct timeval tv; + char str[STR_LEN]; + unsigned int callback_val1; + unsigned int callback_val2; + char valid; +}; +static unsigned int (*trc_callback1) (unsigned char) = NULL; +static unsigned int (*trc_callback2) (unsigned char) = NULL; +static unsigned char trc_param1 = 0; +static unsigned char trc_param2 = 0; +struct trace *trc_arr; +static int trc_index; +static int trc_active = 0; + +void TRC_START() +{ + trc_active = 1; +} + +void TRC_STOP() +{ + trc_active = 0; +} + +void TRC_INIT(void *callback1, void *callback2, unsigned char callback1_param, unsigned char callback2_param) +{ + printk("Marvell debug tracing is on\n"); + trc_arr = (struct trace *)kmalloc(TRACE_ARR_LEN*sizeof(struct trace),GFP_KERNEL); + if(trc_arr == NULL) + { + printk("Can't allocate Debug Trace buffer\n"); + return; + } + memset(trc_arr,0,TRACE_ARR_LEN*sizeof(struct trace)); + trc_index = 0; + trc_callback1 = callback1; + trc_callback2 = callback2; + trc_param1 = callback1_param; + trc_param2 = callback2_param; +} +void TRC_REC(char *fmt,...) +{ + va_list args; + struct trace *trc = &trc_arr[trc_index]; + + if(trc_active == 0) + return; + + do_gettimeofday(&trc->tv); + if(trc_callback1) + trc->callback_val1 = trc_callback1(trc_param1); + if(trc_callback2) + trc->callback_val2 = trc_callback2(trc_param2); + va_start(args, fmt); + vsprintf(trc->str,fmt,args); + va_end(args); + trc->valid = 1; + if((++trc_index) == TRACE_ARR_LEN) { + trc_index = 0; + } +} +void TRC_OUTPUT(void) +{ + int i,j; + struct trace *p; + printk("\n\nTrace %d items\n",TRACE_ARR_LEN); + for(i=0,j=trc_index; ivalid) { + unsigned long uoffs; + struct trace *plast; + if(p == &trc_arr[0]) + plast = &trc_arr[TRACE_ARR_LEN-1]; + else + plast = p-1; + if(p->tv.tv_sec == ((plast)->tv.tv_sec)) + uoffs = (p->tv.tv_usec - ((plast)->tv.tv_usec)); + else + uoffs = (1000000 - ((plast)->tv.tv_usec)) + + ((p->tv.tv_sec - ((plast)->tv.tv_sec) - 1) * 1000000) + + p->tv.tv_usec; + printk("%03d: [+%ld usec]", j, (unsigned long)uoffs); + if(trc_callback1) + printk("[%u]",p->callback_val1); + if(trc_callback2) + printk("[%u]",p->callback_val2); + printk(": %s",p->str); + } + p->valid = 0; + } + memset(trc_arr,0,TRACE_ARR_LEN*sizeof(struct trace)); + trc_index = 0; +} +void TRC_RELEASE(void) +{ + kfree(trc_arr); + trc_index = 0; +} + + diff --git a/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/dbg-trace.h b/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/dbg-trace.h new file mode 100644 index 0000000000..a5aac26736 --- /dev/null +++ b/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/dbg-trace.h @@ -0,0 +1,24 @@ + +#ifndef _MV_DBG_TRCE_H_ +#define _MV_DBG_TRCE_H_ + +#ifdef CONFIG_MV_DBG_TRACE +void TRC_INIT(void *callback1, void *callback2, + unsigned char callback1_param, unsigned char callback2_param); +void TRC_REC(char *fmt,...); +void TRC_OUTPUT(void); +void TRC_RELEASE(void); +void TRC_START(void); +void TRC_STOP(void); + +#else +#define TRC_INIT(x1,x2,x3,x4) +#define TRC_REC(X...) +#define TRC_OUTPUT() +#define TRC_RELEASE() +#define TRC_START() +#define TRC_STOP() +#endif + + +#endif diff --git a/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/kw_family/boardEnv/mvBoardEnvLib.c b/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/kw_family/boardEnv/mvBoardEnvLib.c new file mode 100644 index 0000000000..5f62784473 --- /dev/null +++ b/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/kw_family/boardEnv/mvBoardEnvLib.c @@ -0,0 +1,2513 @@ +/******************************************************************************* +Copyright (C) Marvell International Ltd. and its affiliates + +This software file (the "File") is owned and distributed by Marvell +International Ltd. and/or its affiliates ("Marvell") under the following +alternative licensing terms. Once you have made an election to distribute the +File under one of the following license alternatives, please (i) delete this +introductory statement regarding license alternatives, (ii) delete the two +license alternatives that you have not elected to use and (iii) preserve the +Marvell copyright notice above. + +******************************************************************************** +Marvell Commercial License Option + +If you received this File from Marvell and you have entered into a commercial +license agreement (a "Commercial License") with Marvell, the File is licensed +to you under the terms of the applicable Commercial License. + +******************************************************************************** +Marvell GPL License Option + +If you received this File from Marvell, you may opt to use, redistribute and/or +modify this File in accordance with the terms and conditions of the General +Public License Version 2, June 1991 (the "GPL License"), a copy of which is +available along with the File in the license.txt file or by writing to the Free +Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or +on the worldwide web at http://www.gnu.org/licenses/gpl.txt. + +THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED +WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY +DISCLAIMED. The GPL License provides additional details about this warranty +disclaimer. +******************************************************************************** +Marvell BSD License Option + +If you received this File from Marvell, you may opt to use, redistribute and/or +modify this File under the following licensing terms. +Redistribution and use in source and binary forms, with or without modification, +are permitted provided that the following conditions are met: + + * Redistributions of source code must retain the above copyright notice, + this list of conditions and the following disclaimer. + + * Redistributions in binary form must reproduce the above copyright + notice, this list of conditions and the following disclaimer in the + documentation and/or other materials provided with the distribution. + + * Neither the name of Marvell nor the names of its contributors may be + used to endorse or promote products derived from this software without + specific prior written permission. + +THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND +ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED +WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE +DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR +ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES +(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; +LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON +ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS +SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + +*******************************************************************************/ + +#include "boardEnv/mvBoardEnvLib.h" +#include "ctrlEnv/mvCtrlEnvLib.h" +#include "ctrlEnv/sys/mvCpuIf.h" +#include "cpu/mvCpu.h" +#include "cntmr/mvCntmr.h" +#include "gpp/mvGpp.h" +#include "twsi/mvTwsi.h" +#include "pex/mvPex.h" +#include "device/mvDevice.h" +#include "eth/gbe/mvEthRegs.h" + +/* defines */ +/* #define MV_DEBUG */ +#ifdef MV_DEBUG + #define DB(x) x +#else + #define DB(x) +#endif + +extern MV_CPU_ARM_CLK _cpuARMDDRCLK[]; + +#define CODE_IN_ROM MV_FALSE +#define CODE_IN_RAM MV_TRUE + +extern MV_BOARD_INFO* boardInfoTbl[]; +#define BOARD_INFO(boardId) boardInfoTbl[boardId - BOARD_ID_BASE] + +/* Locals */ +static MV_DEV_CS_INFO* boardGetDevEntry(MV_32 devNum, MV_BOARD_DEV_CLASS devClass); + +MV_U32 tClkRate = -1; + + +/******************************************************************************* +* mvBoardEnvInit - Init board +* +* DESCRIPTION: +* In this function the board environment take care of device bank +* initialization. +* +* INPUT: +* None. +* +* OUTPUT: +* None. +* +* RETURN: +* None. +* +*******************************************************************************/ +MV_VOID mvBoardEnvInit(MV_VOID) +{ + MV_U32 boardId= mvBoardIdGet(); + + if (!((boardId >= BOARD_ID_BASE)&&(boardId < MV_MAX_BOARD_ID))) + { + mvOsPrintf("mvBoardEnvInit:Board unknown.\n"); + return; + + } + + /* Set GPP Out value */ + MV_REG_WRITE(GPP_DATA_OUT_REG(0), BOARD_INFO(boardId)->gppOutValLow); + MV_REG_WRITE(GPP_DATA_OUT_REG(1), BOARD_INFO(boardId)->gppOutValHigh); + + /* set GPP polarity */ + mvGppPolaritySet(0, 0xFFFFFFFF, BOARD_INFO(boardId)->gppPolarityValLow); + mvGppPolaritySet(1, 0xFFFFFFFF, BOARD_INFO(boardId)->gppPolarityValHigh); + + /* Workaround for Erratum FE-MISC-70*/ + if(mvCtrlRevGet()==MV_88F6XXX_A0_REV) + { + BOARD_INFO(boardId)->gppOutEnValLow &= 0xfffffffd; + BOARD_INFO(boardId)->gppOutEnValLow |= (BOARD_INFO(boardId)->gppOutEnValHigh) & 0x00000002; + } /*End of WA*/ + + /* Set GPP Out Enable*/ + mvGppTypeSet(0, 0xFFFFFFFF, BOARD_INFO(boardId)->gppOutEnValLow); + mvGppTypeSet(1, 0xFFFFFFFF, BOARD_INFO(boardId)->gppOutEnValHigh); + + /* Nand CE */ + MV_REG_BIT_SET(NAND_CTRL_REG, NAND_ACTCEBOOT_BIT); +} + +/******************************************************************************* +* mvBoardModelGet - Get Board model +* +* DESCRIPTION: +* This function returns 16bit describing board model. +* Board model is constructed of one byte major and minor numbers in the +* following manner: +* +* INPUT: +* None. +* +* OUTPUT: +* None. +* +* RETURN: +* String describing board model. +* +*******************************************************************************/ +MV_U16 mvBoardModelGet(MV_VOID) +{ + return (mvBoardIdGet() >> 16); +} + +/******************************************************************************* +* mbBoardRevlGet - Get Board revision +* +* DESCRIPTION: +* This function returns a 32bit describing the board revision. +* Board revision is constructed of 4bytes. 2bytes describes major number +* and the other 2bytes describes minor munber. +* For example for board revision 3.4 the function will return +* 0x00030004. +* +* INPUT: +* None. +* +* OUTPUT: +* None. +* +* RETURN: +* String describing board model. +* +*******************************************************************************/ +MV_U16 mvBoardRevGet(MV_VOID) +{ + return (mvBoardIdGet() & 0xFFFF); +} + +/******************************************************************************* +* mvBoardNameGet - Get Board name +* +* DESCRIPTION: +* This function returns a string describing the board model and revision. +* String is extracted from board I2C EEPROM. +* +* INPUT: +* None. +* +* OUTPUT: +* pNameBuff - Buffer to contain board name string. Minimum size 32 chars. +* +* RETURN: +* +* MV_ERROR if informantion can not be read. +*******************************************************************************/ +MV_STATUS mvBoardNameGet(char *pNameBuff) +{ + MV_U32 boardId= mvBoardIdGet(); + + if (!((boardId >= BOARD_ID_BASE)&&(boardId < MV_MAX_BOARD_ID))) + { + mvOsSPrintf (pNameBuff, "Board unknown.\n"); + return MV_ERROR; + + } + + mvOsSPrintf (pNameBuff, "%s",BOARD_INFO(boardId)->boardName); + + return MV_OK; +} + +/******************************************************************************* +* mvBoardIsPortInSgmii - +* +* DESCRIPTION: +* This routine returns MV_TRUE for port number works in SGMII or MV_FALSE +* For all other options. +* +* INPUT: +* ethPortNum - Ethernet port number. +* +* OUTPUT: +* None. +* +* RETURN: +* MV_TRUE - port in SGMII. +* MV_FALSE - other. +* +*******************************************************************************/ +MV_BOOL mvBoardIsPortInSgmii(MV_U32 ethPortNum) +{ + MV_BOOL ethPortSgmiiSupport[BOARD_ETH_PORT_NUM] = MV_ETH_PORT_SGMII; + + if(ethPortNum >= BOARD_ETH_PORT_NUM) + { + mvOsPrintf ("Invalid portNo=%d\n", ethPortNum); + return MV_FALSE; + } + return ethPortSgmiiSupport[ethPortNum]; +} + +/******************************************************************************* +* mvBoardIsPortInGmii - +* +* DESCRIPTION: +* This routine returns MV_TRUE for port number works in GMII or MV_FALSE +* For all other options. +* +* INPUT: +* +* OUTPUT: +* None. +* +* RETURN: +* MV_TRUE - port in GMII. +* MV_FALSE - other. +* +*******************************************************************************/ +MV_BOOL mvBoardIsPortInGmii(MV_VOID) +{ + MV_U32 devClassId, devClass = 0; + if (mvBoardMppGroupTypeGet(devClass) == MV_BOARD_AUTO) + { + /* Get MPP module ID */ + devClassId = mvBoarModuleTypeGet(devClass); + if (MV_BOARD_MODULE_GMII_ID == devClassId) + return MV_TRUE; + } + else if (mvBoardMppGroupTypeGet(devClass) == MV_BOARD_GMII) + return MV_TRUE; + + return MV_FALSE; +} +/******************************************************************************* +* mvBoardPhyAddrGet - Get the phy address +* +* DESCRIPTION: +* This routine returns the Phy address of a given ethernet port. +* +* INPUT: +* ethPortNum - Ethernet port number. +* +* OUTPUT: +* None. +* +* RETURN: +* 32bit describing Phy address, -1 if the port number is wrong. +* +*******************************************************************************/ +MV_32 mvBoardPhyAddrGet(MV_U32 ethPortNum) +{ + MV_U32 boardId= mvBoardIdGet(); + + if (!((boardId >= BOARD_ID_BASE)&&(boardId < MV_MAX_BOARD_ID))) + { + mvOsPrintf("mvBoardPhyAddrGet: Board unknown.\n"); + return MV_ERROR; + } + + return BOARD_INFO(boardId)->pBoardMacInfo[ethPortNum].boardEthSmiAddr; +} + +/******************************************************************************* +* mvBoardMacSpeedGet - Get the Mac speed +* +* DESCRIPTION: +* This routine returns the Mac speed if pre define of a given ethernet port. +* +* INPUT: +* ethPortNum - Ethernet port number. +* +* OUTPUT: +* None. +* +* RETURN: +* MV_BOARD_MAC_SPEED, -1 if the port number is wrong. +* +*******************************************************************************/ +MV_BOARD_MAC_SPEED mvBoardMacSpeedGet(MV_U32 ethPortNum) +{ + MV_U32 boardId= mvBoardIdGet(); + + if (!((boardId >= BOARD_ID_BASE)&&(boardId < MV_MAX_BOARD_ID))) + { + mvOsPrintf("mvBoardMacSpeedGet: Board unknown.\n"); + return MV_ERROR; + } + + return BOARD_INFO(boardId)->pBoardMacInfo[ethPortNum].boardMacSpeed; +} + +/******************************************************************************* +* mvBoardLinkStatusIrqGet - Get the IRQ number for the link status indication +* +* DESCRIPTION: +* This routine returns the IRQ number for the link status indication. +* +* INPUT: +* ethPortNum - Ethernet port number. +* +* OUTPUT: +* None. +* +* RETURN: +* the number of the IRQ for the link status indication, -1 if the port +* number is wrong or if not relevant. +* +*******************************************************************************/ +MV_32 mvBoardLinkStatusIrqGet(MV_U32 ethPortNum) +{ + MV_U32 boardId = mvBoardIdGet(); + + if (!((boardId >= BOARD_ID_BASE)&&(boardId < MV_MAX_BOARD_ID))) + { + mvOsPrintf("mvBoardLinkStatusIrqGet: Board unknown.\n"); + return MV_ERROR; + } + + return BOARD_INFO(boardId)->pSwitchInfo[ethPortNum].linkStatusIrq; +} + +/******************************************************************************* +* mvBoardSwitchPortGet - Get the mapping between the board connector and the +* Ethernet Switch port +* +* DESCRIPTION: +* This routine returns the matching Switch port. +* +* INPUT: +* ethPortNum - Ethernet port number. +* boardPortNum - logical number of the connector on the board +* +* OUTPUT: +* None. +* +* RETURN: +* the matching Switch port, -1 if the port number is wrong or if not relevant. +* +*******************************************************************************/ +MV_32 mvBoardSwitchPortGet(MV_U32 ethPortNum, MV_U8 boardPortNum) +{ + MV_U32 boardId = mvBoardIdGet(); + + if (!((boardId >= BOARD_ID_BASE)&&(boardId < MV_MAX_BOARD_ID))) + { + mvOsPrintf("mvBoardSwitchPortGet: Board unknown.\n"); + return MV_ERROR; + } + if (boardPortNum >= BOARD_ETH_SWITCH_PORT_NUM) + { + mvOsPrintf("mvBoardSwitchPortGet: Illegal board port number.\n"); + return MV_ERROR; + } + + return BOARD_INFO(boardId)->pSwitchInfo[ethPortNum].qdPort[boardPortNum]; +} + +/******************************************************************************* +* mvBoardSwitchCpuPortGet - Get the the Ethernet Switch CPU port +* +* DESCRIPTION: +* This routine returns the Switch CPU port. +* +* INPUT: +* ethPortNum - Ethernet port number. +* +* OUTPUT: +* None. +* +* RETURN: +* the Switch CPU port, -1 if the port number is wrong or if not relevant. +* +*******************************************************************************/ +MV_32 mvBoardSwitchCpuPortGet(MV_U32 ethPortNum) +{ + MV_U32 boardId = mvBoardIdGet(); + + if (!((boardId >= BOARD_ID_BASE)&&(boardId < MV_MAX_BOARD_ID))) + { + mvOsPrintf("mvBoardSwitchCpuPortGet: Board unknown.\n"); + return MV_ERROR; + } + + return BOARD_INFO(boardId)->pSwitchInfo[ethPortNum].qdCpuPort; +} + +/******************************************************************************* +* mvBoardIsSwitchConnected - Get switch connection status +* DESCRIPTION: +* This routine returns port's connection status +* +* INPUT: +* ethPortNum - Ethernet port number. +* +* OUTPUT: +* None. +* +* RETURN: +* 1 - if ethPortNum is connected to switch, 0 otherwise +* +*******************************************************************************/ +MV_32 mvBoardIsSwitchConnected(MV_U32 ethPortNum) +{ + MV_U32 boardId = mvBoardIdGet(); + + if (!((boardId >= BOARD_ID_BASE)&&(boardId < MV_MAX_BOARD_ID))) + { + mvOsPrintf("mvBoardIsSwitchConnected: Board unknown.\n"); + return MV_ERROR; + } + + if(ethPortNum >= BOARD_INFO(boardId)->numBoardMacInfo) + { + mvOsPrintf("mvBoardIsSwitchConnected: Illegal port number(%u)\n", ethPortNum); + return MV_ERROR; + } + + if((MV_32)(BOARD_INFO(boardId)->pSwitchInfo)) + return (MV_32)(BOARD_INFO(boardId)->pSwitchInfo[ethPortNum].switchOnPort == ethPortNum); + else + return 0; +} +/******************************************************************************* +* mvBoardSmiScanModeGet - Get Switch SMI scan mode +* +* DESCRIPTION: +* This routine returns Switch SMI scan mode. +* +* INPUT: +* ethPortNum - Ethernet port number. +* +* OUTPUT: +* None. +* +* RETURN: +* 1 for SMI_MANUAL_MODE, -1 if the port number is wrong or if not relevant. +* +*******************************************************************************/ +MV_32 mvBoardSmiScanModeGet(MV_U32 ethPortNum) +{ + MV_U32 boardId = mvBoardIdGet(); + + if (!((boardId >= BOARD_ID_BASE)&&(boardId < MV_MAX_BOARD_ID))) + { + mvOsPrintf("mvBoardSmiScanModeGet: Board unknown.\n"); + return MV_ERROR; + } + + return BOARD_INFO(boardId)->pSwitchInfo[ethPortNum].smiScanMode; +} +/******************************************************************************* +* mvBoardSpecInitGet - +* +* DESCRIPTION: +* +* INPUT: +* +* OUTPUT: +* None. +* +* RETURN: Return MV_TRUE and parameters in case board need spesific phy init, +* otherwise return MV_FALSE. +* +* +*******************************************************************************/ + +MV_BOOL mvBoardSpecInitGet(MV_U32* regOff, MV_U32* data) +{ + return MV_FALSE; +} + +/******************************************************************************* +* mvBoardTclkGet - Get the board Tclk (Controller clock) +* +* DESCRIPTION: +* This routine extract the controller core clock. +* This function uses the controller counters to make identification. +* Note: In order to avoid interference, make sure task context switch +* and interrupts will not occure during this function operation +* +* INPUT: +* countNum - Counter number. +* +* OUTPUT: +* None. +* +* RETURN: +* 32bit clock cycles in Hertz. +* +*******************************************************************************/ +MV_U32 mvBoardTclkGet(MV_VOID) +{ + if(mvCtrlModelGet()==MV_6281_DEV_ID) + { +#if defined(TCLK_AUTO_DETECT) + MV_U32 tmpTClkRate = MV_BOARD_TCLK_166MHZ; + + tmpTClkRate = MV_REG_READ(MPP_SAMPLE_AT_RESET); + tmpTClkRate &= MSAR_TCLCK_MASK; + + switch (tmpTClkRate) + { + case MSAR_TCLCK_166: + return MV_BOARD_TCLK_166MHZ; + break; + case MSAR_TCLCK_200: + return MV_BOARD_TCLK_200MHZ; + break; + } +#else + return MV_BOARD_TCLK_200MHZ; +#endif + } + + return MV_BOARD_TCLK_166MHZ; + +} +/******************************************************************************* +* mvBoardSysClkGet - Get the board SysClk (CPU bus clock) +* +* DESCRIPTION: +* This routine extract the CPU bus clock. +* +* INPUT: +* countNum - Counter number. +* +* OUTPUT: +* None. +* +* RETURN: +* 32bit clock cycles in Hertz. +* +*******************************************************************************/ +static MV_U32 mvBoard6180SysClkGet(MV_VOID) +{ + MV_U32 sysClkRate=0; + MV_CPU_ARM_CLK _cpu6180_ddr_l2_CLK[] = MV_CPU6180_DDR_L2_CLCK_TBL; + + sysClkRate = MV_REG_READ(MPP_SAMPLE_AT_RESET); + sysClkRate = sysClkRate & MSAR_CPUCLCK_MASK_6180; + sysClkRate = sysClkRate >> MSAR_CPUCLCK_OFFS_6180; + + sysClkRate = _cpu6180_ddr_l2_CLK[sysClkRate].ddrClk; + + return sysClkRate; + +} + +MV_U32 mvBoardSysClkGet(MV_VOID) +{ +#ifdef SYSCLK_AUTO_DETECT + MV_U32 sysClkRate, tmp, pClkRate, indexDdrRtio; + MV_U32 cpuCLK[] = MV_CPU_CLCK_TBL; + MV_U32 ddrRtio[][2] = MV_DDR_CLCK_RTIO_TBL; + + if(mvCtrlModelGet() == MV_6180_DEV_ID) + return mvBoard6180SysClkGet(); + + tmp = MV_REG_READ(MPP_SAMPLE_AT_RESET); + pClkRate = MSAR_CPUCLCK_EXTRACT(tmp); + pClkRate = cpuCLK[pClkRate]; + + indexDdrRtio = tmp & MSAR_DDRCLCK_RTIO_MASK; + indexDdrRtio = indexDdrRtio >> MSAR_DDRCLCK_RTIO_OFFS; + if(ddrRtio[indexDdrRtio][0] != 0) + sysClkRate = ((pClkRate * ddrRtio[indexDdrRtio][1]) / ddrRtio[indexDdrRtio][0]); + else + sysClkRate = 0; + return sysClkRate; +#else + return MV_BOARD_DEFAULT_SYSCLK; +#endif +} + + +/******************************************************************************* +* mvBoardPexBridgeIntPinGet - Get PEX to PCI bridge interrupt pin number +* +* DESCRIPTION: +* Multi-ported PCI Express bridges that is implemented on the board +* collapse interrupts across multiple conventional PCI/PCI-X buses. +* A dual-headed PCI Express bridge would map (or "swizzle") the +* interrupts per the following table (in accordance with the respective +* logical PCI/PCI-X bridge's Device Number), collapse the INTA#-INTD# +* signals from its two logical PCI/PCI-X bridges, collapse the +* INTA#-INTD# signals from any internal sources, and convert the +* signals to in-band PCI Express messages. 10 +* This function returns the upstream interrupt as it was converted by +* the bridge, according to board configuration and the following table: +* PCI dev num +* Interrupt pin 7, 8, 9 +* A -> A D C +* B -> B A D +* C -> C B A +* D -> D C B +* +* +* INPUT: +* devNum - PCI/PCIX device number. +* intPin - PCI Int pin +* +* OUTPUT: +* None. +* +* RETURN: +* Int pin connected to the Interrupt controller +* +*******************************************************************************/ +MV_U32 mvBoardPexBridgeIntPinGet(MV_U32 devNum, MV_U32 intPin) +{ + MV_U32 realIntPin = ((intPin + (3 - (devNum % 4))) %4 ); + + if (realIntPin == 0) return 4; + else return realIntPin; + +} + +/******************************************************************************* +* mvBoardDebugLedNumGet - Get number of debug Leds +* +* DESCRIPTION: +* INPUT: +* boardId +* +* OUTPUT: +* None. +* +* RETURN: +* None. +* +*******************************************************************************/ +MV_U32 mvBoardDebugLedNumGet(MV_U32 boardId) +{ + return BOARD_INFO(boardId)->activeLedsNumber; +} + +/******************************************************************************* +* mvBoardDebugLeg - Set the board debug Leds +* +* DESCRIPTION: turn on/off status leds. +* Note: assume MPP leds are part of group 0 only. +* +* INPUT: +* hexNum - Number to be displied in hex by Leds. +* +* OUTPUT: +* None. +* +* RETURN: +* None. +* +*******************************************************************************/ +MV_VOID mvBoardDebugLed(MV_U32 hexNum) +{ + MV_U32 val = 0,totalMask, currentBitMask = 1,i; + MV_U32 boardId= mvBoardIdGet(); + + if (BOARD_INFO(boardId)->pLedGppPin == NULL) + return; + + totalMask = (1 << BOARD_INFO(boardId)->activeLedsNumber) -1; + hexNum &= totalMask; + totalMask = 0; + + for (i = 0 ; i < BOARD_INFO(boardId)->activeLedsNumber ; i++) + { + if (hexNum & currentBitMask) + { + val |= (1 << BOARD_INFO(boardId)->pLedGppPin[i]); + } + + totalMask |= (1 << BOARD_INFO(boardId)->pLedGppPin[i]); + + currentBitMask = (currentBitMask << 1); + } + + if (BOARD_INFO(boardId)->ledsPolarity) + { + mvGppValueSet(0, totalMask, val); + } + else + { + mvGppValueSet(0, totalMask, ~val); + } +} + + +/******************************************************************************* +* mvBoarGpioPinGet - mvBoarGpioPinGet +* +* DESCRIPTION: +* +* INPUT: +* class - MV_BOARD_GPP_CLASS enum. +* +* OUTPUT: +* None. +* +* RETURN: +* GPIO pin number. The function return -1 for bad parameters. +* +*******************************************************************************/ +MV_32 mvBoarGpioPinNumGet(MV_BOARD_GPP_CLASS class, MV_U32 index) +{ + MV_U32 boardId, i; + MV_U32 indexFound = 0; + + boardId = mvBoardIdGet(); + + if (!((boardId >= BOARD_ID_BASE)&&(boardId < MV_MAX_BOARD_ID))) + { + mvOsPrintf("mvBoardRTCGpioPinGet:Board unknown.\n"); + return MV_ERROR; + + } + + for (i = 0; i < BOARD_INFO(boardId)->numBoardGppInfo; i++) + if (BOARD_INFO(boardId)->pBoardGppInfo[i].devClass == class) { + if (indexFound == index) + return (MV_U32)BOARD_INFO(boardId)->pBoardGppInfo[i].gppPinNum; + else + indexFound++; + + } + + return MV_ERROR; +} + + +/******************************************************************************* +* mvBoardRTCGpioPinGet - mvBoardRTCGpioPinGet +* +* DESCRIPTION: +* +* INPUT: +* None. +* +* OUTPUT: +* None. +* +* RETURN: +* GPIO pin number. The function return -1 for bad parameters. +* +*******************************************************************************/ +MV_32 mvBoardRTCGpioPinGet(MV_VOID) +{ + return mvBoarGpioPinNumGet(BOARD_GPP_RTC, 0); +} + + +/******************************************************************************* +* mvBoardReset - mvBoardReset +* +* DESCRIPTION: +* Reset the board +* INPUT: +* None. +* +* OUTPUT: +* None. +* +* RETURN: +* None +* +*******************************************************************************/ +MV_VOID mvBoardReset(MV_VOID) +{ + MV_32 resetPin; + + /* Get gpp reset pin if define */ + resetPin = mvBoardResetGpioPinGet(); + if (resetPin != MV_ERROR) + { + MV_REG_BIT_RESET( GPP_DATA_OUT_REG(0) ,(1 << resetPin)); + MV_REG_BIT_RESET( GPP_DATA_OUT_EN_REG(0) ,(1 << resetPin)); + + } + else + { + /* No gpp reset pin was found, try to reset ussing + system reset out */ + MV_REG_BIT_SET( CPU_RSTOUTN_MASK_REG , BIT2); + MV_REG_BIT_SET( CPU_SYS_SOFT_RST_REG , BIT0); + } +} + +/******************************************************************************* +* mvBoardResetGpioPinGet - mvBoardResetGpioPinGet +* +* DESCRIPTION: +* +* INPUT: +* None. +* +* OUTPUT: +* None. +* +* RETURN: +* GPIO pin number. The function return -1 for bad parameters. +* +*******************************************************************************/ +MV_32 mvBoardResetGpioPinGet(MV_VOID) +{ + return mvBoarGpioPinNumGet(BOARD_GPP_RESET, 0); +} +/******************************************************************************* +* mvBoardSDIOGpioPinGet - mvBoardSDIOGpioPinGet +* +* DESCRIPTION: +* used for hotswap detection +* INPUT: +* None. +* +* OUTPUT: +* None. +* +* RETURN: +* GPIO pin number. The function return -1 for bad parameters. +* +*******************************************************************************/ +MV_32 mvBoardSDIOGpioPinGet(MV_VOID) +{ + return mvBoarGpioPinNumGet(BOARD_GPP_SDIO_DETECT, 0); +} + +/******************************************************************************* +* mvBoardUSBVbusGpioPinGet - return Vbus input GPP +* +* DESCRIPTION: +* +* INPUT: +* int devNo. +* +* OUTPUT: +* None. +* +* RETURN: +* GPIO pin number. The function return -1 for bad parameters. +* +*******************************************************************************/ +MV_32 mvBoardUSBVbusGpioPinGet(MV_32 devId) +{ + return mvBoarGpioPinNumGet(BOARD_GPP_USB_VBUS, devId); +} + +/******************************************************************************* +* mvBoardUSBVbusEnGpioPinGet - return Vbus Enable output GPP +* +* DESCRIPTION: +* +* INPUT: +* int devNo. +* +* OUTPUT: +* None. +* +* RETURN: +* GPIO pin number. The function return -1 for bad parameters. +* +*******************************************************************************/ +MV_32 mvBoardUSBVbusEnGpioPinGet(MV_32 devId) +{ + return mvBoarGpioPinNumGet(BOARD_GPP_USB_VBUS_EN, devId); +} + + +/******************************************************************************* +* mvBoardGpioIntMaskGet - Get GPIO mask for interrupt pins +* +* DESCRIPTION: +* This function returns a 32-bit mask of GPP pins that connected to +* interrupt generating sources on board. +* For example if UART channel A is hardwired to GPP pin 8 and +* UART channel B is hardwired to GPP pin 4 the fuinction will return +* the value 0x000000110 +* +* INPUT: +* None. +* +* OUTPUT: +* None. +* +* RETURN: +* See description. The function return -1 if board is not identified. +* +*******************************************************************************/ +MV_32 mvBoardGpioIntMaskLowGet(MV_VOID) +{ + MV_U32 boardId; + + boardId = mvBoardIdGet(); + + if (!((boardId >= BOARD_ID_BASE)&&(boardId < MV_MAX_BOARD_ID))) + { + mvOsPrintf("mvBoardGpioIntMaskGet:Board unknown.\n"); + return MV_ERROR; + + } + + return BOARD_INFO(boardId)->intsGppMaskLow; +} +MV_32 mvBoardGpioIntMaskHighGet(MV_VOID) +{ + MV_U32 boardId; + + boardId = mvBoardIdGet(); + + if (!((boardId >= BOARD_ID_BASE)&&(boardId < MV_MAX_BOARD_ID))) + { + mvOsPrintf("mvBoardGpioIntMaskGet:Board unknown.\n"); + return MV_ERROR; + + } + + return BOARD_INFO(boardId)->intsGppMaskHigh; +} + + +/******************************************************************************* +* mvBoardMppGet - Get board dependent MPP register value +* +* DESCRIPTION: +* MPP settings are derived from board design. +* MPP group consist of 8 MPPs. An MPP group represent MPP +* control register. +* This function retrieves board dependend MPP register value. +* +* INPUT: +* mppGroupNum - MPP group number. +* +* OUTPUT: +* None. +* +* RETURN: +* 32bit value describing MPP control register value. +* +*******************************************************************************/ +MV_32 mvBoardMppGet(MV_U32 mppGroupNum) +{ + MV_U32 boardId; + + boardId = mvBoardIdGet(); + + if (!((boardId >= BOARD_ID_BASE)&&(boardId < MV_MAX_BOARD_ID))) + { + mvOsPrintf("mvBoardMppGet:Board unknown.\n"); + return MV_ERROR; + + } + + return BOARD_INFO(boardId)->pBoardMppConfigValue[0].mppGroup[mppGroupNum]; +} + + +/******************************************************************************* +* mvBoardMppGroupId - If MPP group type is AUTO then identify it using twsi +* +* DESCRIPTION: +* +* INPUT: +* +* OUTPUT: +* None. +* +* RETURN: +* +*******************************************************************************/ +MV_VOID mvBoardMppGroupIdUpdate(MV_VOID) +{ + + MV_BOARD_MPP_GROUP_CLASS devClass; + MV_BOARD_MODULE_ID_CLASS devClassId; + MV_BOARD_MPP_TYPE_CLASS mppGroupType; + MV_U32 devId; + MV_U32 maxMppGrp = 1; + + devId = mvCtrlModelGet(); + + switch(devId){ + case MV_6281_DEV_ID: + maxMppGrp = MV_6281_MPP_MAX_MODULE; + break; + case MV_6192_DEV_ID: + maxMppGrp = MV_6192_MPP_MAX_MODULE; + break; + case MV_6190_DEV_ID: + maxMppGrp = MV_6190_MPP_MAX_MODULE; + break; + case MV_6180_DEV_ID: + maxMppGrp = MV_6180_MPP_MAX_MODULE; + break; + } + + for (devClass = 0; devClass < maxMppGrp; devClass++) + { + /* If MPP group can be defined by the module connected to it */ + if (mvBoardMppGroupTypeGet(devClass) == MV_BOARD_AUTO) + { + /* Get MPP module ID */ + devClassId = mvBoarModuleTypeGet(devClass); + if (MV_ERROR != devClassId) + { + switch(devClassId) + { + case MV_BOARD_MODULE_TDM_ID: + case MV_BOARD_MODULE_TDM_5CHAN_ID: + mppGroupType = MV_BOARD_TDM; + break; + case MV_BOARD_MODULE_AUDIO_ID: + mppGroupType = MV_BOARD_AUDIO; + break; + case MV_BOARD_MODULE_RGMII_ID: + mppGroupType = MV_BOARD_RGMII; + break; + case MV_BOARD_MODULE_GMII_ID: + mppGroupType = MV_BOARD_GMII; + break; + case MV_BOARD_MODULE_TS_ID: + mppGroupType = MV_BOARD_TS; + break; + case MV_BOARD_MODULE_MII_ID: + mppGroupType = MV_BOARD_MII; + break; + default: + mppGroupType = MV_BOARD_OTHER; + break; + } + } + else + /* The module bay is empty */ + mppGroupType = MV_BOARD_OTHER; + + /* Update MPP group type */ + mvBoardMppGroupTypeSet(devClass, mppGroupType); + } + + /* Update MPP output voltage for RGMII 1.8V. Set port to GMII for GMII module */ + if ((mvBoardMppGroupTypeGet(devClass) == MV_BOARD_RGMII)) + MV_REG_BIT_SET(MPP_OUTPUT_DRIVE_REG,MPP_1_8_RGMII1_OUTPUT_DRIVE | MPP_1_8_RGMII0_OUTPUT_DRIVE); + else + { + if ((mvBoardMppGroupTypeGet(devClass) == MV_BOARD_GMII)) + { + MV_REG_BIT_RESET(MPP_OUTPUT_DRIVE_REG, BIT7 | BIT15); + MV_REG_BIT_RESET(ETH_PORT_SERIAL_CTRL_1_REG(0),BIT3); + MV_REG_BIT_RESET(ETH_PORT_SERIAL_CTRL_1_REG(1),BIT3); + } + else if ((mvBoardMppGroupTypeGet(devClass) == MV_BOARD_MII)) + { + /* Assumption that the MDC & MDIO should be 3.3V */ + MV_REG_BIT_RESET(MPP_OUTPUT_DRIVE_REG, BIT7 | BIT15); + /* Assumption that only ETH1 can be MII when using modules on DB */ + MV_REG_BIT_RESET(ETH_PORT_SERIAL_CTRL_1_REG(1),BIT3); + } + } + } +} + +/******************************************************************************* +* mvBoardMppGroupTypeGet +* +* DESCRIPTION: +* +* INPUT: +* mppGroupClass - MPP group number 0 for MPP[35:20] or 1 for MPP[49:36]. +* +* OUTPUT: +* None. +* +* RETURN: +* +*******************************************************************************/ +MV_BOARD_MPP_TYPE_CLASS mvBoardMppGroupTypeGet(MV_BOARD_MPP_GROUP_CLASS mppGroupClass) +{ + MV_U32 boardId; + + boardId = mvBoardIdGet(); + + if (!((boardId >= BOARD_ID_BASE)&&(boardId < MV_MAX_BOARD_ID))) + { + mvOsPrintf("mvBoardMppGet:Board unknown.\n"); + return MV_ERROR; + + } + + if (mppGroupClass == MV_BOARD_MPP_GROUP_1) + return BOARD_INFO(boardId)->pBoardMppTypeValue[0].boardMppGroup1; + else + return BOARD_INFO(boardId)->pBoardMppTypeValue[0].boardMppGroup2; +} + +/******************************************************************************* +* mvBoardMppGroupTypeSet +* +* DESCRIPTION: +* +* INPUT: +* mppGroupClass - MPP group number 0 for MPP[35:20] or 1 for MPP[49:36]. +* mppGroupType - MPP group type for MPP[35:20] or for MPP[49:36]. +* +* OUTPUT: +* None. +* +* RETURN: +* +*******************************************************************************/ +MV_VOID mvBoardMppGroupTypeSet(MV_BOARD_MPP_GROUP_CLASS mppGroupClass, + MV_BOARD_MPP_TYPE_CLASS mppGroupType) +{ + MV_U32 boardId; + + boardId = mvBoardIdGet(); + + if (!((boardId >= BOARD_ID_BASE)&&(boardId < MV_MAX_BOARD_ID))) + { + mvOsPrintf("mvBoardMppGet:Board unknown.\n"); + } + + if (mppGroupClass == MV_BOARD_MPP_GROUP_1) + BOARD_INFO(boardId)->pBoardMppTypeValue[0].boardMppGroup1 = mppGroupType; + else + BOARD_INFO(boardId)->pBoardMppTypeValue[0].boardMppGroup2 = mppGroupType; + +} + +/******************************************************************************* +* mvBoardMppMuxSet - Update MPP mux +* +* DESCRIPTION: +* +* INPUT: +* +* OUTPUT: +* None. +* +* RETURN: +* +*******************************************************************************/ +MV_VOID mvBoardMppMuxSet(MV_VOID) +{ + + MV_BOARD_MPP_GROUP_CLASS devClass; + MV_BOARD_MPP_TYPE_CLASS mppGroupType; + MV_U32 devId; + MV_U8 muxVal = 0xf; + MV_U32 maxMppGrp = 1; + MV_TWSI_SLAVE twsiSlave; + MV_TWSI_ADDR slave; + + devId = mvCtrlModelGet(); + + switch(devId){ + case MV_6281_DEV_ID: + maxMppGrp = MV_6281_MPP_MAX_MODULE; + break; + case MV_6192_DEV_ID: + maxMppGrp = MV_6192_MPP_MAX_MODULE; + break; + case MV_6190_DEV_ID: + maxMppGrp = MV_6190_MPP_MAX_MODULE; + break; + case MV_6180_DEV_ID: + maxMppGrp = MV_6180_MPP_MAX_MODULE; + break; + } + + for (devClass = 0; devClass < maxMppGrp; devClass++) + { + mppGroupType = mvBoardMppGroupTypeGet(devClass); + + switch(mppGroupType) + { + case MV_BOARD_TDM: + muxVal &= ~(devClass ? (0x2 << (devClass * 2)):0x0); + break; + case MV_BOARD_AUDIO: + muxVal &= ~(devClass ? 0x7 : 0x0); /*old Z0 value 0xd:0x0*/ + break; + case MV_BOARD_TS: + muxVal &= ~(devClass ? (0x2 << (devClass * 2)):0x0); + break; + default: + muxVal |= (devClass ? 0xf : 0); + break; + } + } + + /* TWSI init */ + slave.type = ADDR7_BIT; + slave.address = 0; + mvTwsiInit(0, TWSI_SPEED, mvBoardTclkGet(), &slave, 0); + + /* Read MPP module ID */ + DB(mvOsPrintf("Board: twsi exp set\n")); + twsiSlave.slaveAddr.address = mvBoardTwsiExpAddrGet(MV_BOARD_MUX_I2C_ADDR_ENTRY); + twsiSlave.slaveAddr.type = mvBoardTwsiExpAddrTypeGet(MV_BOARD_MUX_I2C_ADDR_ENTRY); + twsiSlave.validOffset = MV_TRUE; + /* Offset is the first command after the address which indicate the register number to be read + in next operation */ + twsiSlave.offset = 2; + twsiSlave.moreThen256 = MV_FALSE; + + + + if( MV_OK != mvTwsiWrite (0, &twsiSlave, &muxVal, 1) ) + { + DB(mvOsPrintf("Board: twsi exp out val fail\n")); + return; + } + DB(mvOsPrintf("Board: twsi exp out val succeded\n")); + + /* Change twsi exp to output */ + twsiSlave.offset = 6; + muxVal = 0; + if( MV_OK != mvTwsiWrite (0, &twsiSlave, &muxVal, 1) ) + { + DB(mvOsPrintf("Board: twsi exp change to out fail\n")); + return; + } + DB(mvOsPrintf("Board: twsi exp change to out succeded\n")); + +} + +/******************************************************************************* +* mvBoardTdmMppSet - set MPPs in TDM module +* +* DESCRIPTION: +* +* INPUT: type of second telephony device +* +* OUTPUT: +* None. +* +* RETURN: +* +*******************************************************************************/ +MV_VOID mvBoardTdmMppSet(MV_32 chType) +{ + + MV_BOARD_MPP_GROUP_CLASS devClass; + MV_BOARD_MPP_TYPE_CLASS mppGroupType; + MV_U32 devId; + MV_U8 muxVal = 1; + MV_U8 muxValMask = 1; + MV_U8 twsiVal; + MV_U32 maxMppGrp = 1; + MV_TWSI_SLAVE twsiSlave; + MV_TWSI_ADDR slave; + + devId = mvCtrlModelGet(); + + switch(devId){ + case MV_6281_DEV_ID: + maxMppGrp = MV_6281_MPP_MAX_MODULE; + break; + case MV_6192_DEV_ID: + maxMppGrp = MV_6192_MPP_MAX_MODULE; + break; + case MV_6190_DEV_ID: + maxMppGrp = MV_6190_MPP_MAX_MODULE; + break; + case MV_6180_DEV_ID: + maxMppGrp = MV_6180_MPP_MAX_MODULE; + break; + } + + for (devClass = 0; devClass < maxMppGrp; devClass++) + { + mppGroupType = mvBoardMppGroupTypeGet(devClass); + if(mppGroupType == MV_BOARD_TDM) + break; + } + + if(devClass == maxMppGrp) + return; /* TDM module not found */ + + /* TWSI init */ + slave.type = ADDR7_BIT; + slave.address = 0; + mvTwsiInit(0, TWSI_SPEED, mvBoardTclkGet(), &slave, 0); + + /* Read MPP module ID */ + DB(mvOsPrintf("Board: twsi exp set\n")); + twsiSlave.slaveAddr.address = mvBoardTwsiExpAddrGet(devClass); + twsiSlave.slaveAddr.type = ADDR7_BIT; + twsiSlave.validOffset = MV_TRUE; + /* Offset is the first command after the address which indicate the register number to be read + in next operation */ + twsiSlave.offset = 3; + twsiSlave.moreThen256 = MV_FALSE; + + if(mvBoardIdGet() == RD_88F6281A_ID) + { + muxVal = 0xc; + muxValMask = 0xf3; + } + + mvTwsiRead(0, &twsiSlave, &twsiVal, 1); + muxVal = (twsiVal & muxValMask) | muxVal; + + if( MV_OK != mvTwsiWrite (0, &twsiSlave, &muxVal, 1) ) + { + mvOsPrintf("Board: twsi exp out val fail\n"); + return; + } + DB(mvOsPrintf("Board: twsi exp out val succeded\n")); + + /* Change twsi exp to output */ + twsiSlave.offset = 7; + muxVal = 0xfe; + if(mvBoardIdGet() == RD_88F6281A_ID) + muxVal = 0xf3; + + mvTwsiRead(0, &twsiSlave, &twsiVal, 1); + muxVal = (twsiVal & muxVal); + + if( MV_OK != mvTwsiWrite (0, &twsiSlave, &muxVal, 1) ) + { + mvOsPrintf("Board: twsi exp change to out fail\n"); + return; + } + DB(mvOsPrintf("Board: twsi exp change to out succeded\n")); + /* reset the line to 0 */ + twsiSlave.offset = 3; + muxVal = 0; + muxValMask = 1; + + if(mvBoardIdGet() == RD_88F6281A_ID) { + muxVal = 0x0; + muxValMask = 0xf3; + } + + mvTwsiRead(0, &twsiSlave, &twsiVal, 1); + muxVal = (twsiVal & muxValMask) | muxVal; + + if( MV_OK != mvTwsiWrite (0, &twsiSlave, &muxVal, 1) ) + { + mvOsPrintf("Board: twsi exp out val fail\n"); + return; + } + DB(mvOsPrintf("Board: twsi exp out val succeded\n")); + + mvOsDelay(20); + + /* set the line to 1 */ + twsiSlave.offset = 3; + muxVal = 1; + muxValMask = 1; + + if(mvBoardIdGet() == RD_88F6281A_ID) + { + muxVal = 0xc; + muxValMask = 0xf3; + if(chType) /* FXS - issue reset properly */ + { + MV_REG_BIT_SET(GPP_DATA_OUT_REG(1), MV_GPP12); + mvOsDelay(50); + MV_REG_BIT_RESET(GPP_DATA_OUT_REG(1), MV_GPP12); + } + else /* FXO - issue reset via TDM_CODEC_RST*/ + { + /* change MPP44 type to TDM_CODEC_RST(0x2) */ + MV_REG_WRITE(MPP_CONTROL_REG5, ((MV_REG_READ(MPP_CONTROL_REG5) & 0xFFF0FFFF) | BIT17)); + } + } + + mvTwsiRead(0, &twsiSlave, &twsiVal, 1); + muxVal = (twsiVal & muxValMask) | muxVal; + + if( MV_OK != mvTwsiWrite (0, &twsiSlave, &muxVal, 1) ) + { + mvOsPrintf("Board: twsi exp out val fail\n"); + return; + } + + /* TBD - 5 channels */ +#if defined(MV_TDM_5CHANNELS) + /* change MPP38 type to GPIO(0x0) & polarity for TDM_STROBE */ + MV_REG_WRITE(MPP_CONTROL_REG4, (MV_REG_READ(MPP_CONTROL_REG4) & 0xF0FFFFFF)); + mvGppPolaritySet(1, MV_GPP6, 0); + + twsiSlave.offset = 6; + twsiSlave.slaveAddr.address = mvBoardTwsiExpAddrGet(2); + + mvTwsiRead(0, &twsiSlave, &twsiVal, 1); + muxVal = (twsiVal & ~BIT2); + + if( MV_OK != mvTwsiWrite (0, &twsiSlave, &muxVal, 1) ) + { + mvOsPrintf("Board: twsi exp change to out fail\n"); + return; + } + + + twsiSlave.offset = 2; + + mvTwsiRead(0, &twsiSlave, &twsiVal, 1); + muxVal = (twsiVal & ~BIT2); + + if( MV_OK != mvTwsiWrite (0, &twsiSlave, &muxVal, 1) ) + { + mvOsPrintf("Board: twsi exp change to out fail\n"); + return; + } +#endif + DB(mvOsPrintf("Board: twsi exp out val succeded\n")); + + +} +/******************************************************************************* +* mvBoardVoiceConnModeGet - return SLIC/DAA connection & interrupt modes +* +* DESCRIPTION: +* +* INPUT: +* +* OUTPUT: +* None. +* +* RETURN: +* +*******************************************************************************/ + +MV_VOID mvBoardVoiceConnModeGet(MV_32* connMode, MV_32* irqMode) +{ + switch(mvBoardIdGet()) + { + case RD_88F6281A_ID: + *connMode = DAISY_CHAIN_MODE; + *irqMode = INTERRUPT_TO_TDM; + break; + case DB_88F6281A_BP_ID: + *connMode = DUAL_CHIP_SELECT_MODE; + *irqMode = INTERRUPT_TO_TDM; + break; + case RD_88F6192A_ID: + *connMode = DUAL_CHIP_SELECT_MODE; + *irqMode = INTERRUPT_TO_TDM; + break; + case DB_88F6192A_BP_ID: + *connMode = DUAL_CHIP_SELECT_MODE; + *irqMode = INTERRUPT_TO_TDM; + break; + default: + *connMode = *irqMode = -1; + mvOsPrintf("mvBoardVoiceAssembleModeGet: TDM not supported(boardId=0x%x)\n",mvBoardIdGet()); + } + return; + +} + +/******************************************************************************* +* mvBoardMppModuleTypePrint - print module detect +* +* DESCRIPTION: +* +* INPUT: +* +* OUTPUT: +* None. +* +* RETURN: +* +*******************************************************************************/ +MV_VOID mvBoardMppModuleTypePrint(MV_VOID) +{ + + MV_BOARD_MPP_GROUP_CLASS devClass; + MV_BOARD_MPP_TYPE_CLASS mppGroupType; + MV_U32 devId; + MV_U32 maxMppGrp = 1; + + devId = mvCtrlModelGet(); + + switch(devId){ + case MV_6281_DEV_ID: + maxMppGrp = MV_6281_MPP_MAX_MODULE; + break; + case MV_6192_DEV_ID: + maxMppGrp = MV_6192_MPP_MAX_MODULE; + break; + case MV_6190_DEV_ID: + maxMppGrp = MV_6190_MPP_MAX_MODULE; + break; + case MV_6180_DEV_ID: + maxMppGrp = MV_6180_MPP_MAX_MODULE; + break; + } + + for (devClass = 0; devClass < maxMppGrp; devClass++) + { + mppGroupType = mvBoardMppGroupTypeGet(devClass); + + switch(mppGroupType) + { + case MV_BOARD_TDM: + if(devId != MV_6190_DEV_ID) + mvOsPrintf("Module %d is TDM\n", devClass); + break; + case MV_BOARD_AUDIO: + if(devId != MV_6190_DEV_ID) + mvOsPrintf("Module %d is AUDIO\n", devClass); + break; + case MV_BOARD_RGMII: + if(devId != MV_6190_DEV_ID) + mvOsPrintf("Module %d is RGMII\n", devClass); + break; + case MV_BOARD_GMII: + if(devId != MV_6190_DEV_ID) + mvOsPrintf("Module %d is GMII\n", devClass); + break; + case MV_BOARD_TS: + if(devId != MV_6190_DEV_ID) + mvOsPrintf("Module %d is TS\n", devClass); + break; + default: + break; + } + } +} + +/* Board devices API managments */ + +/******************************************************************************* +* mvBoardGetDeviceNumber - Get number of device of some type on the board +* +* DESCRIPTION: +* +* INPUT: +* devType - The device type ( Flash,RTC , etc .. ) +* +* OUTPUT: +* None. +* +* RETURN: +* If the device is found on the board the then the functions returns the +* number of those devices else the function returns 0 +* +* +*******************************************************************************/ +MV_32 mvBoardGetDevicesNumber(MV_BOARD_DEV_CLASS devClass) +{ + MV_U32 foundIndex=0,devNum; + MV_U32 boardId= mvBoardIdGet(); + + if (!((boardId >= BOARD_ID_BASE)&&(boardId < MV_MAX_BOARD_ID))) + { + mvOsPrintf("mvBoardGetDeviceNumber:Board unknown.\n"); + return 0xFFFFFFFF; + + } + + for (devNum = START_DEV_CS; devNum < BOARD_INFO(boardId)->numBoardDeviceIf; devNum++) + { + if (BOARD_INFO(boardId)->pDevCsInfo[devNum].devClass == devClass) + { + foundIndex++; + } + } + + return foundIndex; + +} + +/******************************************************************************* +* mvBoardGetDeviceBaseAddr - Get base address of a device existing on the board +* +* DESCRIPTION: +* +* INPUT: +* devIndex - The device sequential number on the board +* devType - The device type ( Flash,RTC , etc .. ) +* +* OUTPUT: +* None. +* +* RETURN: +* If the device is found on the board the then the functions returns the +* Base address else the function returns 0xffffffff +* +* +*******************************************************************************/ +MV_32 mvBoardGetDeviceBaseAddr(MV_32 devNum, MV_BOARD_DEV_CLASS devClass) +{ + MV_DEV_CS_INFO* devEntry; + devEntry = boardGetDevEntry(devNum,devClass); + if (devEntry != NULL) + { + return mvCpuIfTargetWinBaseLowGet(DEV_TO_TARGET(devEntry->deviceCS)); + + } + + return 0xFFFFFFFF; +} + +/******************************************************************************* +* mvBoardGetDeviceBusWidth - Get Bus width of a device existing on the board +* +* DESCRIPTION: +* +* INPUT: +* devIndex - The device sequential number on the board +* devType - The device type ( Flash,RTC , etc .. ) +* +* OUTPUT: +* None. +* +* RETURN: +* If the device is found on the board the then the functions returns the +* Bus width else the function returns 0xffffffff +* +* +*******************************************************************************/ +MV_32 mvBoardGetDeviceBusWidth(MV_32 devNum, MV_BOARD_DEV_CLASS devClass) +{ + MV_DEV_CS_INFO* devEntry; + + devEntry = boardGetDevEntry(devNum,devClass); + if (devEntry != NULL) + { + return 8; + } + + return 0xFFFFFFFF; + +} + +/******************************************************************************* +* mvBoardGetDeviceWidth - Get dev width of a device existing on the board +* +* DESCRIPTION: +* +* INPUT: +* devIndex - The device sequential number on the board +* devType - The device type ( Flash,RTC , etc .. ) +* +* OUTPUT: +* None. +* +* RETURN: +* If the device is found on the board the then the functions returns the +* dev width else the function returns 0xffffffff +* +* +*******************************************************************************/ +MV_32 mvBoardGetDeviceWidth(MV_32 devNum, MV_BOARD_DEV_CLASS devClass) +{ + MV_DEV_CS_INFO* devEntry; + MV_U32 boardId= mvBoardIdGet(); + + if (!((boardId >= BOARD_ID_BASE)&&(boardId < MV_MAX_BOARD_ID))) + { + mvOsPrintf("Board unknown.\n"); + return 0xFFFFFFFF; + } + + devEntry = boardGetDevEntry(devNum,devClass); + if (devEntry != NULL) + return devEntry->devWidth; + + return MV_ERROR; + +} + +/******************************************************************************* +* mvBoardGetDeviceWinSize - Get the window size of a device existing on the board +* +* DESCRIPTION: +* +* INPUT: +* devIndex - The device sequential number on the board +* devType - The device type ( Flash,RTC , etc .. ) +* +* OUTPUT: +* None. +* +* RETURN: +* If the device is found on the board the then the functions returns the +* window size else the function returns 0xffffffff +* +* +*******************************************************************************/ +MV_32 mvBoardGetDeviceWinSize(MV_32 devNum, MV_BOARD_DEV_CLASS devClass) +{ + MV_DEV_CS_INFO* devEntry; + MV_U32 boardId = mvBoardIdGet(); + + if (!((boardId >= BOARD_ID_BASE)&&(boardId < MV_MAX_BOARD_ID))) + { + mvOsPrintf("Board unknown.\n"); + return 0xFFFFFFFF; + } + + devEntry = boardGetDevEntry(devNum,devClass); + if (devEntry != NULL) + { + return mvCpuIfTargetWinSizeGet(DEV_TO_TARGET(devEntry->deviceCS)); + } + + return 0xFFFFFFFF; +} + + +/******************************************************************************* +* boardGetDevEntry - returns the entry pointer of a device on the board +* +* DESCRIPTION: +* +* INPUT: +* devIndex - The device sequential number on the board +* devType - The device type ( Flash,RTC , etc .. ) +* +* OUTPUT: +* None. +* +* RETURN: +* If the device is found on the board the then the functions returns the +* dev number else the function returns 0x0 +* +* +*******************************************************************************/ +static MV_DEV_CS_INFO* boardGetDevEntry(MV_32 devNum, MV_BOARD_DEV_CLASS devClass) +{ + MV_U32 foundIndex=0,devIndex; + MV_U32 boardId= mvBoardIdGet(); + + if (!((boardId >= BOARD_ID_BASE)&&(boardId < MV_MAX_BOARD_ID))) + { + mvOsPrintf("boardGetDevEntry: Board unknown.\n"); + return NULL; + + } + + for (devIndex = START_DEV_CS; devIndex < BOARD_INFO(boardId)->numBoardDeviceIf; devIndex++) + { + /* TBR */ + /*if (BOARD_INFO(boardId)->pDevCsInfo[devIndex].deviceCS == MV_BOOTDEVICE_INDEX) + continue;*/ + + if (BOARD_INFO(boardId)->pDevCsInfo[devIndex].devClass == devClass) + { + if (foundIndex == devNum) + { + return &(BOARD_INFO(boardId)->pDevCsInfo[devIndex]); + } + foundIndex++; + } + } + + /* device not found */ + return NULL; +} + +/* Get device CS number */ + +MV_U32 boardGetDevCSNum(MV_32 devNum, MV_BOARD_DEV_CLASS devClass) +{ + MV_DEV_CS_INFO* devEntry; + MV_U32 boardId= mvBoardIdGet(); + + if (!((boardId >= BOARD_ID_BASE)&&(boardId < MV_MAX_BOARD_ID))) + { + mvOsPrintf("Board unknown.\n"); + return 0xFFFFFFFF; + + } + + + devEntry = boardGetDevEntry(devNum,devClass); + if (devEntry != NULL) + return devEntry->deviceCS; + + return 0xFFFFFFFF; + +} + +/******************************************************************************* +* mvBoardRtcTwsiAddrTypeGet - +* +* DESCRIPTION: +* +* INPUT: +* +* OUTPUT: +* None. +* +* RETURN: +* +* +*******************************************************************************/ +MV_U8 mvBoardRtcTwsiAddrTypeGet() +{ + int i; + MV_U32 boardId= mvBoardIdGet(); + + for (i = 0; i < BOARD_INFO(boardId)->numBoardTwsiDev; i++) + if (BOARD_INFO(boardId)->pBoardTwsiDev[i].devClass == BOARD_TWSI_RTC) + return BOARD_INFO(boardId)->pBoardTwsiDev[i].twsiDevAddrType; + return (MV_ERROR); +} + +/******************************************************************************* +* mvBoardRtcTwsiAddrGet - +* +* DESCRIPTION: +* +* INPUT: +* +* OUTPUT: +* None. +* +* RETURN: +* +* +*******************************************************************************/ +MV_U8 mvBoardRtcTwsiAddrGet() +{ + int i; + MV_U32 boardId= mvBoardIdGet(); + + for (i = 0; i < BOARD_INFO(boardId)->numBoardTwsiDev; i++) + if (BOARD_INFO(boardId)->pBoardTwsiDev[i].devClass == BOARD_TWSI_RTC) + return BOARD_INFO(boardId)->pBoardTwsiDev[i].twsiDevAddr; + return (0xFF); +} + +/******************************************************************************* +* mvBoardA2DTwsiAddrTypeGet - +* +* DESCRIPTION: +* +* INPUT: +* +* OUTPUT: +* None. +* +* RETURN: +* +* +*******************************************************************************/ +MV_U8 mvBoardA2DTwsiAddrTypeGet() +{ + int i; + MV_U32 boardId= mvBoardIdGet(); + + for (i = 0; i < BOARD_INFO(boardId)->numBoardTwsiDev; i++) + if (BOARD_INFO(boardId)->pBoardTwsiDev[i].devClass == BOARD_TWSI_AUDIO_DEC) + return BOARD_INFO(boardId)->pBoardTwsiDev[i].twsiDevAddrType; + return (MV_ERROR); +} + +/******************************************************************************* +* mvBoardA2DTwsiAddrGet - +* +* DESCRIPTION: +* +* INPUT: +* +* OUTPUT: +* None. +* +* RETURN: +* +* +*******************************************************************************/ +MV_U8 mvBoardA2DTwsiAddrGet() +{ + int i; + MV_U32 boardId= mvBoardIdGet(); + + for (i = 0; i < BOARD_INFO(boardId)->numBoardTwsiDev; i++) + if (BOARD_INFO(boardId)->pBoardTwsiDev[i].devClass == BOARD_TWSI_AUDIO_DEC) + return BOARD_INFO(boardId)->pBoardTwsiDev[i].twsiDevAddr; + return (0xFF); +} + +/******************************************************************************* +* mvBoardTwsiExpAddrTypeGet - +* +* DESCRIPTION: +* +* INPUT: +* +* OUTPUT: +* None. +* +* RETURN: +* +* +*******************************************************************************/ +MV_U8 mvBoardTwsiExpAddrTypeGet(MV_U32 index) +{ + int i; + MV_U32 indexFound = 0; + MV_U32 boardId= mvBoardIdGet(); + + for (i = 0; i < BOARD_INFO(boardId)->numBoardTwsiDev; i++) + if (BOARD_INFO(boardId)->pBoardTwsiDev[i].devClass == BOARD_DEV_TWSI_EXP) + { + if (indexFound == index) + return BOARD_INFO(boardId)->pBoardTwsiDev[i].twsiDevAddrType; + else + indexFound++; + } + + return (MV_ERROR); +} + +/******************************************************************************* +* mvBoardTwsiExpAddrGet - +* +* DESCRIPTION: +* +* INPUT: +* +* OUTPUT: +* None. +* +* RETURN: +* +* +*******************************************************************************/ +MV_U8 mvBoardTwsiExpAddrGet(MV_U32 index) +{ + int i; + MV_U32 indexFound = 0; + MV_U32 boardId= mvBoardIdGet(); + + for (i = 0; i < BOARD_INFO(boardId)->numBoardTwsiDev; i++) + if (BOARD_INFO(boardId)->pBoardTwsiDev[i].devClass == BOARD_DEV_TWSI_EXP) + { + if (indexFound == index) + return BOARD_INFO(boardId)->pBoardTwsiDev[i].twsiDevAddr; + else + indexFound++; + } + + return (0xFF); +} + + +/******************************************************************************* +* mvBoardTwsiSatRAddrTypeGet - +* +* DESCRIPTION: +* +* INPUT: +* +* OUTPUT: +* None. +* +* RETURN: +* +* +*******************************************************************************/ +MV_U8 mvBoardTwsiSatRAddrTypeGet(MV_U32 index) +{ + int i; + MV_U32 indexFound = 0; + MV_U32 boardId= mvBoardIdGet(); + + for (i = 0; i < BOARD_INFO(boardId)->numBoardTwsiDev; i++) + if (BOARD_INFO(boardId)->pBoardTwsiDev[i].devClass == BOARD_DEV_TWSI_SATR) + { + if (indexFound == index) + return BOARD_INFO(boardId)->pBoardTwsiDev[i].twsiDevAddrType; + else + indexFound++; + } + + return (MV_ERROR); +} + +/******************************************************************************* +* mvBoardTwsiSatRAddrGet - +* +* DESCRIPTION: +* +* INPUT: +* +* OUTPUT: +* None. +* +* RETURN: +* +* +*******************************************************************************/ +MV_U8 mvBoardTwsiSatRAddrGet(MV_U32 index) +{ + int i; + MV_U32 indexFound = 0; + MV_U32 boardId= mvBoardIdGet(); + + for (i = 0; i < BOARD_INFO(boardId)->numBoardTwsiDev; i++) + if (BOARD_INFO(boardId)->pBoardTwsiDev[i].devClass == BOARD_DEV_TWSI_SATR) + { + if (indexFound == index) + return BOARD_INFO(boardId)->pBoardTwsiDev[i].twsiDevAddr; + else + indexFound++; + } + + return (0xFF); +} + +/******************************************************************************* +* mvBoardNandWidthGet - +* +* DESCRIPTION: Get the width of the first NAND device in byte. +* +* INPUT: +* +* OUTPUT: +* None. +* +* RETURN: 1, 2, 4 or MV_ERROR +* +* +*******************************************************************************/ +/* */ +MV_32 mvBoardNandWidthGet(void) +{ + MV_U32 devNum; + MV_U32 devWidth; + MV_U32 boardId= mvBoardIdGet(); + + for (devNum = START_DEV_CS; devNum < BOARD_INFO(boardId)->numBoardDeviceIf; devNum++) + { + devWidth = mvBoardGetDeviceWidth(devNum, BOARD_DEV_NAND_FLASH); + if (devWidth != MV_ERROR) + return (devWidth / 8); + } + + /* NAND wasn't found */ + return MV_ERROR; +} + +MV_U32 gBoardId = -1; + +/******************************************************************************* +* mvBoardIdGet - Get Board model +* +* DESCRIPTION: +* This function returns board ID. +* Board ID is 32bit word constructed of board model (16bit) and +* board revision (16bit) in the following way: 0xMMMMRRRR. +* +* INPUT: +* None. +* +* OUTPUT: +* None. +* +* RETURN: +* 32bit board ID number, '-1' if board is undefined. +* +*******************************************************************************/ +MV_U32 mvBoardIdGet(MV_VOID) +{ + MV_U32 tmpBoardId = -1; + + if(gBoardId == -1) + { + #if defined(DB_88F6281A) + tmpBoardId = DB_88F6281A_BP_ID; + #elif defined(RD_88F6281A) + tmpBoardId = RD_88F6281A_ID; + #elif defined(DB_88F6192A) + tmpBoardId = DB_88F6192A_BP_ID; + #elif defined(DB_88F6190A) + tmpBoardId = DB_88F6190A_BP_ID; + #elif defined(RD_88F6192A) + tmpBoardId = RD_88F6192A_ID; + #elif defined(RD_88F6190A) + tmpBoardId = RD_88F6190A_ID; + #elif defined(DB_88F6180A) + tmpBoardId = DB_88F6180A_BP_ID; + #elif defined(RD_88F6281A_PCAC) + tmpBoardId = RD_88F6281A_PCAC_ID; + #elif defined(RD_88F6281A_SHEEVA_PLUG) + tmpBoardId = SHEEVA_PLUG_ID; + #elif defined(DB_CUSTOMER) + tmpBoardId = DB_CUSTOMER_ID; + #endif + gBoardId = tmpBoardId; + } + + return gBoardId; +} + + +/******************************************************************************* +* mvBoarModuleTypeGet - mvBoarModuleTypeGet +* +* DESCRIPTION: +* +* INPUT: +* group num - MV_BOARD_MPP_GROUP_CLASS enum +* +* OUTPUT: +* None. +* +* RETURN: +* module num - MV_BOARD_MODULE_CLASS enum +* +*******************************************************************************/ +MV_BOARD_MODULE_ID_CLASS mvBoarModuleTypeGet(MV_BOARD_MPP_GROUP_CLASS devClass) +{ + MV_TWSI_SLAVE twsiSlave; + MV_TWSI_ADDR slave; + MV_U8 data; + + /* TWSI init */ + slave.type = ADDR7_BIT; + slave.address = 0; + mvTwsiInit(0, TWSI_SPEED, mvBoardTclkGet(), &slave, 0); + + /* Read MPP module ID */ + DB(mvOsPrintf("Board: Read MPP module ID\n")); + twsiSlave.slaveAddr.address = mvBoardTwsiExpAddrGet(devClass); + twsiSlave.slaveAddr.type = mvBoardTwsiExpAddrTypeGet(devClass); + twsiSlave.validOffset = MV_TRUE; + /* Offset is the first command after the address which indicate the register number to be read + in next operation */ + twsiSlave.offset = 0; + twsiSlave.moreThen256 = MV_FALSE; + + + + if( MV_OK != mvTwsiRead (0, &twsiSlave, &data, 1) ) + { + DB(mvOsPrintf("Board: Read MPP module ID fail\n")); + return MV_ERROR; + } + DB(mvOsPrintf("Board: Read MPP module ID succeded\n")); + + return data; +} + +/******************************************************************************* +* mvBoarTwsiSatRGet - +* +* DESCRIPTION: +* +* INPUT: +* device num - one of three devices +* reg num - 0 or 1 +* +* OUTPUT: +* None. +* +* RETURN: +* reg value +* +*******************************************************************************/ +MV_U8 mvBoarTwsiSatRGet(MV_U8 devNum, MV_U8 regNum) +{ + MV_TWSI_SLAVE twsiSlave; + MV_TWSI_ADDR slave; + MV_U8 data; + + /* TWSI init */ + slave.type = ADDR7_BIT; + slave.address = 0; + mvTwsiInit(0, TWSI_SPEED, mvBoardTclkGet(), &slave, 0); + + /* Read MPP module ID */ + DB(mvOsPrintf("Board: Read S@R device read\n")); + twsiSlave.slaveAddr.address = mvBoardTwsiSatRAddrGet(devNum); + twsiSlave.slaveAddr.type = mvBoardTwsiSatRAddrTypeGet(devNum); + twsiSlave.validOffset = MV_TRUE; + /* Use offset as command */ + twsiSlave.offset = regNum; + twsiSlave.moreThen256 = MV_FALSE; + + if( MV_OK != mvTwsiRead (0, &twsiSlave, &data, 1) ) + { + DB(mvOsPrintf("Board: Read S@R fail\n")); + return MV_ERROR; + } + DB(mvOsPrintf("Board: Read S@R succeded\n")); + + return data; +} + +/******************************************************************************* +* mvBoarTwsiSatRSet - +* +* DESCRIPTION: +* +* INPUT: +* devNum - one of three devices +* regNum - 0 or 1 +* regVal - value +* +* +* OUTPUT: +* None. +* +* RETURN: +* reg value +* +*******************************************************************************/ +MV_STATUS mvBoarTwsiSatRSet(MV_U8 devNum, MV_U8 regNum, MV_U8 regVal) +{ + MV_TWSI_SLAVE twsiSlave; + MV_TWSI_ADDR slave; + + /* TWSI init */ + slave.type = ADDR7_BIT; + slave.address = 0; + mvTwsiInit(0, TWSI_SPEED, mvBoardTclkGet(), &slave, 0); + + /* Read MPP module ID */ + twsiSlave.slaveAddr.address = mvBoardTwsiSatRAddrGet(devNum); + twsiSlave.slaveAddr.type = mvBoardTwsiSatRAddrTypeGet(devNum); + twsiSlave.validOffset = MV_TRUE; + DB(mvOsPrintf("Board: Write S@R device addr %x, type %x, data %x\n", twsiSlave.slaveAddr.address,\ + twsiSlave.slaveAddr.type, regVal)); + /* Use offset as command */ + twsiSlave.offset = regNum; + twsiSlave.moreThen256 = MV_FALSE; + if( MV_OK != mvTwsiWrite (0, &twsiSlave, ®Val, 1) ) + { + DB(mvOsPrintf("Board: Write S@R fail\n")); + return MV_ERROR; + } + DB(mvOsPrintf("Board: Write S@R succeded\n")); + + return MV_OK; +} + +/******************************************************************************* +* mvBoardSlicGpioPinGet - +* +* DESCRIPTION: +* +* INPUT: +* +* OUTPUT: +* None. +* +* RETURN: +* +* +*******************************************************************************/ +MV_32 mvBoardSlicGpioPinGet(MV_U32 slicNum) +{ + MV_U32 boardId; + boardId = mvBoardIdGet(); + + switch (boardId) + { + case DB_88F6281A_BP_ID: + case RD_88F6281A_ID: + default: + return MV_ERROR; + break; + + } +} + +/******************************************************************************* +* mvBoardFanPowerControl - Turn on/off the fan power control on the RD-6281A +* +* DESCRIPTION: +* +* INPUT: +* mode - MV_TRUE = on ; MV_FALSE = off +* +* OUTPUT: +* MV_STATUS - MV_OK , MV_ERROR. +* +* RETURN: +* +*******************************************************************************/ +MV_STATUS mvBoardFanPowerControl(MV_BOOL mode) +{ + + MV_U8 val = 1, twsiVal; + MV_TWSI_SLAVE twsiSlave; + MV_TWSI_ADDR slave; + + if(mvBoardIdGet() != RD_88F6281A_ID) + return MV_ERROR; + + /* TWSI init */ + slave.type = ADDR7_BIT; + slave.address = 0; + mvTwsiInit(0, TWSI_SPEED, mvBoardTclkGet(), &slave, 0); + + /* Read MPP module ID */ + DB(mvOsPrintf("Board: twsi exp set\n")); + twsiSlave.slaveAddr.address = mvBoardTwsiExpAddrGet(1); + twsiSlave.slaveAddr.type = ADDR7_BIT; + twsiSlave.validOffset = MV_TRUE; + /* Offset is the first command after the address which indicate the register number to be read + in next operation */ + twsiSlave.offset = 3; + twsiSlave.moreThen256 = MV_FALSE; + if(mode == MV_TRUE) + val = 0x1; + else + val = 0; + mvTwsiRead(0, &twsiSlave, &twsiVal, 1); + val = (twsiVal & 0xfe) | val; + + if( MV_OK != mvTwsiWrite (0, &twsiSlave, &val, 1) ) + { + DB(mvOsPrintf("Board: twsi exp out val fail\n")); + return MV_ERROR; + } + DB(mvOsPrintf("Board: twsi exp out val succeded\n")); + + /* Change twsi exp to output */ + twsiSlave.offset = 7; + mvTwsiRead(0, &twsiSlave, &twsiVal, 1); + val = (twsiVal & 0xfe); + if( MV_OK != mvTwsiWrite (0, &twsiSlave, &val, 1) ) + { + DB(mvOsPrintf("Board: twsi exp change to out fail\n")); + return MV_ERROR; + } + DB(mvOsPrintf("Board: twsi exp change to out succeded\n")); + return MV_OK; +} + +/******************************************************************************* +* mvBoardHDDPowerControl - Turn on/off the HDD power control on the RD-6281A +* +* DESCRIPTION: +* +* INPUT: +* mode - MV_TRUE = on ; MV_FALSE = off +* +* OUTPUT: +* MV_STATUS - MV_OK , MV_ERROR. +* +* RETURN: +* +*******************************************************************************/ +MV_STATUS mvBoardHDDPowerControl(MV_BOOL mode) +{ + + MV_U8 val = 1, twsiVal; + MV_TWSI_SLAVE twsiSlave; + MV_TWSI_ADDR slave; + + if(mvBoardIdGet() != RD_88F6281A_ID) + return MV_ERROR; + + /* TWSI init */ + slave.type = ADDR7_BIT; + slave.address = 0; + mvTwsiInit(0, TWSI_SPEED, mvBoardTclkGet(), &slave, 0); + + /* Read MPP module ID */ + DB(mvOsPrintf("Board: twsi exp set\n")); + twsiSlave.slaveAddr.address = mvBoardTwsiExpAddrGet(1); + twsiSlave.slaveAddr.type = ADDR7_BIT; + twsiSlave.validOffset = MV_TRUE; + /* Offset is the first command after the address which indicate the register number to be read + in next operation */ + twsiSlave.offset = 3; + twsiSlave.moreThen256 = MV_FALSE; + if(mode == MV_TRUE) + val = 0x2; + else + val = 0; + mvTwsiRead(0, &twsiSlave, &twsiVal, 1); + val = (twsiVal & 0xfd) | val; + if( MV_OK != mvTwsiWrite (0, &twsiSlave, &val, 1) ) + { + DB(mvOsPrintf("Board: twsi exp out val fail\n")); + return MV_ERROR; + } + DB(mvOsPrintf("Board: twsi exp out val succeded\n")); + + /* Change twsi exp to output */ + twsiSlave.offset = 7; + mvTwsiRead(0, &twsiSlave, &twsiVal, 1); + val = (twsiVal & 0xfd); + if( MV_OK != mvTwsiWrite (0, &twsiSlave, &val, 1) ) + { + DB(mvOsPrintf("Board: twsi exp change to out fail\n")); + return MV_ERROR; + } + DB(mvOsPrintf("Board: twsi exp change to out succeded\n")); + return MV_OK; +} + +/******************************************************************************* +* mvBoardSDioWPControl - Turn on/off the SDIO WP on the RD-6281A +* +* DESCRIPTION: +* +* INPUT: +* mode - MV_TRUE = on ; MV_FALSE = off +* +* OUTPUT: +* MV_STATUS - MV_OK , MV_ERROR. +* +* RETURN: +* +*******************************************************************************/ +MV_STATUS mvBoardSDioWPControl(MV_BOOL mode) +{ + + MV_U8 val = 1, twsiVal; + MV_TWSI_SLAVE twsiSlave; + MV_TWSI_ADDR slave; + + if(mvBoardIdGet() != RD_88F6281A_ID) + return MV_ERROR; + + /* TWSI init */ + slave.type = ADDR7_BIT; + slave.address = 0; + mvTwsiInit(0, TWSI_SPEED, mvBoardTclkGet(), &slave, 0); + + /* Read MPP module ID */ + DB(mvOsPrintf("Board: twsi exp set\n")); + twsiSlave.slaveAddr.address = mvBoardTwsiExpAddrGet(0); + twsiSlave.slaveAddr.type = ADDR7_BIT; + twsiSlave.validOffset = MV_TRUE; + /* Offset is the first command after the address which indicate the register number to be read + in next operation */ + twsiSlave.offset = 3; + twsiSlave.moreThen256 = MV_FALSE; + if(mode == MV_TRUE) + val = 0x10; + else + val = 0; + mvTwsiRead(0, &twsiSlave, &twsiVal, 1); + val = (twsiVal & 0xef) | val; + if( MV_OK != mvTwsiWrite (0, &twsiSlave, &val, 1) ) + { + DB(mvOsPrintf("Board: twsi exp out val fail\n")); + return MV_ERROR; + } + DB(mvOsPrintf("Board: twsi exp out val succeded\n")); + + /* Change twsi exp to output */ + twsiSlave.offset = 7; + mvTwsiRead(0, &twsiSlave, &twsiVal, 1); + val = (twsiVal & 0xef); + if( MV_OK != mvTwsiWrite (0, &twsiSlave, &val, 1) ) + { + DB(mvOsPrintf("Board: twsi exp change to out fail\n")); + return MV_ERROR; + } + DB(mvOsPrintf("Board: twsi exp change to out succeded\n")); + return MV_OK; +} + diff --git a/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/kw_family/boardEnv/mvBoardEnvLib.h b/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/kw_family/boardEnv/mvBoardEnvLib.h new file mode 100644 index 0000000000..dead633695 --- /dev/null +++ b/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/kw_family/boardEnv/mvBoardEnvLib.h @@ -0,0 +1,376 @@ +/******************************************************************************* +Copyright (C) Marvell International Ltd. and its affiliates + +This software file (the "File") is owned and distributed by Marvell +International Ltd. and/or its affiliates ("Marvell") under the following +alternative licensing terms. Once you have made an election to distribute the +File under one of the following license alternatives, please (i) delete this +introductory statement regarding license alternatives, (ii) delete the two +license alternatives that you have not elected to use and (iii) preserve the +Marvell copyright notice above. + +******************************************************************************** +Marvell Commercial License Option + +If you received this File from Marvell and you have entered into a commercial +license agreement (a "Commercial License") with Marvell, the File is licensed +to you under the terms of the applicable Commercial License. + +******************************************************************************** +Marvell GPL License Option + +If you received this File from Marvell, you may opt to use, redistribute and/or +modify this File in accordance with the terms and conditions of the General +Public License Version 2, June 1991 (the "GPL License"), a copy of which is +available along with the File in the license.txt file or by writing to the Free +Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or +on the worldwide web at http://www.gnu.org/licenses/gpl.txt. + +THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED +WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY +DISCLAIMED. The GPL License provides additional details about this warranty +disclaimer. +******************************************************************************** +Marvell BSD License Option + +If you received this File from Marvell, you may opt to use, redistribute and/or +modify this File under the following licensing terms. +Redistribution and use in source and binary forms, with or without modification, +are permitted provided that the following conditions are met: + + * Redistributions of source code must retain the above copyright notice, + this list of conditions and the following disclaimer. + + * Redistributions in binary form must reproduce the above copyright + notice, this list of conditions and the following disclaimer in the + documentation and/or other materials provided with the distribution. + + * Neither the name of Marvell nor the names of its contributors may be + used to endorse or promote products derived from this software without + specific prior written permission. + +THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND +ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED +WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE +DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR +ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES +(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; +LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON +ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS +SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + +*******************************************************************************/ +#ifndef __INCmvBoardEnvLibh +#define __INCmvBoardEnvLibh + +/* defines */ +/* The below constant macros defines the board I2C EEPROM data offsets */ + + + +#include "ctrlEnv/mvCtrlEnvLib.h" +#include "mvSysHwConfig.h" +#include "boardEnv/mvBoardEnvSpec.h" + + +/* DUART stuff for Tclk detection only */ +#define DUART_BAUD_RATE 115200 +#define MAX_CLOCK_MARGINE 5000000 /* Maximum detected clock margine */ + +/* Voice devices assembly modes */ +#define DAISY_CHAIN_MODE 1 +#define DUAL_CHIP_SELECT_MODE 0 +#define INTERRUPT_TO_MPP 1 +#define INTERRUPT_TO_TDM 0 + + +#define BOARD_ETH_PORT_NUM MV_ETH_MAX_PORTS +#define BOARD_ETH_SWITCH_PORT_NUM 5 + +#define MV_BOARD_MAX_USB_IF 1 +#define MV_BOARD_MAX_MPP 7 +#define MV_BOARD_NAME_LEN 0x20 + +typedef struct _boardData +{ + MV_U32 magic; + MV_U16 boardId; + MV_U8 boardVer; + MV_U8 boardRev; + MV_U32 reserved1; + MV_U32 reserved2; + +}BOARD_DATA; + +typedef enum _devBoardMppGroupClass +{ + MV_BOARD_MPP_GROUP_1, + MV_BOARD_MPP_GROUP_2, + MV_BOARD_MAX_MPP_GROUP +}MV_BOARD_MPP_GROUP_CLASS; + +typedef enum _devBoardMppTypeClass +{ + MV_BOARD_AUTO, + MV_BOARD_TDM, + MV_BOARD_AUDIO, + MV_BOARD_RGMII, + MV_BOARD_GMII, + MV_BOARD_TS, + MV_BOARD_MII, + MV_BOARD_OTHER +}MV_BOARD_MPP_TYPE_CLASS; + +typedef enum _devBoardModuleIdClass +{ + MV_BOARD_MODULE_TDM_ID = 1, + MV_BOARD_MODULE_AUDIO_ID, + MV_BOARD_MODULE_RGMII_ID, + MV_BOARD_MODULE_GMII_ID, + MV_BOARD_MODULE_TS_ID, + MV_BOARD_MODULE_MII_ID, + MV_BOARD_MODULE_TDM_5CHAN_ID, + MV_BOARD_MODULE_OTHER_ID +}MV_BOARD_MODULE_ID_CLASS; + +typedef struct _boardMppTypeInfo +{ + MV_BOARD_MPP_TYPE_CLASS boardMppGroup1; + MV_BOARD_MPP_TYPE_CLASS boardMppGroup2; + +}MV_BOARD_MPP_TYPE_INFO; + + +typedef enum _devBoardClass +{ + BOARD_DEV_NOR_FLASH, + BOARD_DEV_NAND_FLASH, + BOARD_DEV_SEVEN_SEG, + BOARD_DEV_FPGA, + BOARD_DEV_SRAM, + BOARD_DEV_SPI_FLASH, + BOARD_DEV_OTHER, +}MV_BOARD_DEV_CLASS; + +typedef enum _devTwsiBoardClass +{ + BOARD_TWSI_RTC, + BOARD_DEV_TWSI_EXP, + BOARD_DEV_TWSI_SATR, + BOARD_TWSI_AUDIO_DEC, + BOARD_TWSI_OTHER +}MV_BOARD_TWSI_CLASS; + +typedef enum _devGppBoardClass +{ + BOARD_GPP_RTC, + BOARD_GPP_MV_SWITCH, + BOARD_GPP_USB_VBUS, + BOARD_GPP_USB_VBUS_EN, + BOARD_GPP_USB_OC, + BOARD_GPP_USB_HOST_DEVICE, + BOARD_GPP_REF_CLCK, + BOARD_GPP_VOIP_SLIC, + BOARD_GPP_LIFELINE, + BOARD_GPP_BUTTON, + BOARD_GPP_TS_BUTTON_C, + BOARD_GPP_TS_BUTTON_U, + BOARD_GPP_TS_BUTTON_D, + BOARD_GPP_TS_BUTTON_L, + BOARD_GPP_TS_BUTTON_R, + BOARD_GPP_POWER_BUTTON, + BOARD_GPP_RESTOR_BUTTON, + BOARD_GPP_WPS_BUTTON, + BOARD_GPP_HDD0_POWER, + BOARD_GPP_HDD1_POWER, + BOARD_GPP_FAN_POWER, + BOARD_GPP_RESET, + BOARD_GPP_POWER_ON_LED, + BOARD_GPP_HDD_POWER, + BOARD_GPP_SDIO_POWER, + BOARD_GPP_SDIO_DETECT, + BOARD_GPP_SDIO_WP, + BOARD_GPP_SWITCH_PHY_INT, + BOARD_GPP_TSU_DIRCTION, + BOARD_GPP_OTHER +}MV_BOARD_GPP_CLASS; + + +typedef struct _devCsInfo +{ + MV_U8 deviceCS; + MV_U32 params; + MV_U32 devClass; /* MV_BOARD_DEV_CLASS */ + MV_U8 devWidth; + +}MV_DEV_CS_INFO; + + +#define MV_BOARD_PHY_FORCE_10MB 0x0 +#define MV_BOARD_PHY_FORCE_100MB 0x1 +#define MV_BOARD_PHY_FORCE_1000MB 0x2 +#define MV_BOARD_PHY_SPEED_AUTO 0x3 + +typedef struct _boardSwitchInfo +{ + MV_32 linkStatusIrq; + MV_32 qdPort[BOARD_ETH_SWITCH_PORT_NUM]; + MV_32 qdCpuPort; + MV_32 smiScanMode; /* 1 for SMI_MANUAL_MODE, 0 otherwise */ + MV_32 switchOnPort; + +}MV_BOARD_SWITCH_INFO; + +typedef struct _boardLedInfo +{ + MV_U8 activeLedsNumber; + MV_U8 ledsPolarity; /* '0' or '1' to turn on led */ + MV_U8* gppPinNum; /* Pointer to GPP values */ + +}MV_BOARD_LED_INFO; + +typedef struct _boardGppInfo +{ + MV_BOARD_GPP_CLASS devClass; + MV_U8 gppPinNum; + +}MV_BOARD_GPP_INFO; + + +typedef struct _boardTwsiInfo +{ + MV_BOARD_TWSI_CLASS devClass; + MV_U8 twsiDevAddr; + MV_U8 twsiDevAddrType; + +}MV_BOARD_TWSI_INFO; + + +typedef enum _boardMacSpeed +{ + BOARD_MAC_SPEED_10M, + BOARD_MAC_SPEED_100M, + BOARD_MAC_SPEED_1000M, + BOARD_MAC_SPEED_AUTO, + +}MV_BOARD_MAC_SPEED; + +typedef struct _boardMacInfo +{ + MV_BOARD_MAC_SPEED boardMacSpeed; + MV_U8 boardEthSmiAddr; + +}MV_BOARD_MAC_INFO; + +typedef struct _boardMppInfo +{ + MV_U32 mppGroup[MV_BOARD_MAX_MPP]; + +}MV_BOARD_MPP_INFO; + +typedef struct _boardInfo +{ + char boardName[MV_BOARD_NAME_LEN]; + MV_U8 numBoardMppTypeValue; + MV_BOARD_MPP_TYPE_INFO* pBoardMppTypeValue; + MV_U8 numBoardMppConfigValue; + MV_BOARD_MPP_INFO* pBoardMppConfigValue; + MV_U32 intsGppMaskLow; + MV_U32 intsGppMaskHigh; + MV_U8 numBoardDeviceIf; + MV_DEV_CS_INFO* pDevCsInfo; + MV_U8 numBoardTwsiDev; + MV_BOARD_TWSI_INFO* pBoardTwsiDev; + MV_U8 numBoardMacInfo; + MV_BOARD_MAC_INFO* pBoardMacInfo; + MV_U8 numBoardGppInfo; + MV_BOARD_GPP_INFO* pBoardGppInfo; + MV_U8 activeLedsNumber; + MV_U8* pLedGppPin; + MV_U8 ledsPolarity; /* '0' or '1' to turn on led */ + /* GPP values */ + MV_U32 gppOutEnValLow; + MV_U32 gppOutEnValHigh; + MV_U32 gppOutValLow; + MV_U32 gppOutValHigh; + MV_U32 gppPolarityValLow; + MV_U32 gppPolarityValHigh; + + /* Switch Configuration */ + MV_BOARD_SWITCH_INFO* pSwitchInfo; +}MV_BOARD_INFO; + + + +MV_VOID mvBoardEnvInit(MV_VOID); +MV_U32 mvBoardIdGet(MV_VOID); +MV_U16 mvBoardModelGet(MV_VOID); +MV_U16 mvBoardRevGet(MV_VOID); +MV_STATUS mvBoardNameGet(char *pNameBuff); +MV_32 mvBoardPhyAddrGet(MV_U32 ethPortNum); +MV_BOARD_MAC_SPEED mvBoardMacSpeedGet(MV_U32 ethPortNum); +MV_32 mvBoardLinkStatusIrqGet(MV_U32 ethPortNum); +MV_32 mvBoardSwitchPortGet(MV_U32 ethPortNum, MV_U8 boardPortNum); +MV_32 mvBoardSwitchCpuPortGet(MV_U32 ethPortNum); +MV_32 mvBoardIsSwitchConnected(MV_U32 ethPortNum); +MV_32 mvBoardSmiScanModeGet(MV_U32 ethPortNum); +MV_BOOL mvBoardIsPortInSgmii(MV_U32 ethPortNum); +MV_BOOL mvBoardIsPortInGmii(MV_VOID); +MV_U32 mvBoardTclkGet(MV_VOID); +MV_U32 mvBoardSysClkGet(MV_VOID); +MV_U32 mvBoardDebugLedNumGet(MV_U32 boardId); +MV_VOID mvBoardDebugLed(MV_U32 hexNum); +MV_32 mvBoardMppGet(MV_U32 mppGroupNum); + +MV_U8 mvBoardRtcTwsiAddrTypeGet(MV_VOID); +MV_U8 mvBoardRtcTwsiAddrGet(MV_VOID); + +MV_U8 mvBoardA2DTwsiAddrTypeGet(MV_VOID); +MV_U8 mvBoardA2DTwsiAddrGet(MV_VOID); + +MV_U8 mvBoardTwsiExpAddrGet(MV_U32 index); +MV_U8 mvBoardTwsiSatRAddrTypeGet(MV_U32 index); +MV_U8 mvBoardTwsiSatRAddrGet(MV_U32 index); +MV_U8 mvBoardTwsiExpAddrTypeGet(MV_U32 index); +MV_BOARD_MODULE_ID_CLASS mvBoarModuleTypeGet(MV_BOARD_MPP_GROUP_CLASS devClass); +MV_BOARD_MPP_TYPE_CLASS mvBoardMppGroupTypeGet(MV_BOARD_MPP_GROUP_CLASS mppGroupClass); +MV_VOID mvBoardMppGroupTypeSet(MV_BOARD_MPP_GROUP_CLASS mppGroupClass, + MV_BOARD_MPP_TYPE_CLASS mppGroupType); +MV_VOID mvBoardMppGroupIdUpdate(MV_VOID); +MV_VOID mvBoardMppMuxSet(MV_VOID); +MV_VOID mvBoardTdmMppSet(MV_32 chType); +MV_VOID mvBoardVoiceConnModeGet(MV_32* connMode, MV_32* irqMode); + +MV_VOID mvBoardMppModuleTypePrint(MV_VOID); +MV_VOID mvBoardReset(MV_VOID); +MV_U8 mvBoarTwsiSatRGet(MV_U8 devNum, MV_U8 regNum); +MV_STATUS mvBoarTwsiSatRSet(MV_U8 devNum, MV_U8 regNum, MV_U8 regVal); +MV_BOOL mvBoardSpecInitGet(MV_U32* regOff, MV_U32* data); +/* Board devices API managments */ +MV_32 mvBoardGetDevicesNumber(MV_BOARD_DEV_CLASS devClass); +MV_32 mvBoardGetDeviceBaseAddr(MV_32 devNum, MV_BOARD_DEV_CLASS devClass); +MV_32 mvBoardGetDeviceBusWidth(MV_32 devNum, MV_BOARD_DEV_CLASS devClass); +MV_32 mvBoardGetDeviceWidth(MV_32 devNum, MV_BOARD_DEV_CLASS devClass); +MV_32 mvBoardGetDeviceWinSize(MV_32 devNum, MV_BOARD_DEV_CLASS devClass); +MV_U32 boardGetDevCSNum(MV_32 devNum, MV_BOARD_DEV_CLASS devClass); + +/* Gpio Pin Connections API */ +MV_32 mvBoardUSBVbusGpioPinGet(int devId); +MV_32 mvBoardUSBVbusEnGpioPinGet(int devId); +MV_U32 mvBoardPexBridgeIntPinGet(MV_U32 devNum, MV_U32 intPin); + +MV_32 mvBoardResetGpioPinGet(MV_VOID); +MV_32 mvBoardRTCGpioPinGet(MV_VOID); +MV_32 mvBoardGpioIntMaskLowGet(MV_VOID); +MV_32 mvBoardGpioIntMaskHighGet(MV_VOID); +MV_32 mvBoardSlicGpioPinGet(MV_U32 slicNum); + +MV_32 mvBoardSDIOGpioPinGet(MV_VOID); +MV_STATUS mvBoardSDioWPControl(MV_BOOL mode); +MV_32 mvBoarGpioPinNumGet(MV_BOARD_GPP_CLASS class, MV_U32 index); + +MV_32 mvBoardNandWidthGet(void); +MV_STATUS mvBoardFanPowerControl(MV_BOOL mode); +MV_STATUS mvBoardHDDPowerControl(MV_BOOL mode); +#endif /* __INCmvBoardEnvLibh */ diff --git a/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/kw_family/boardEnv/mvBoardEnvSpec.c b/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/kw_family/boardEnv/mvBoardEnvSpec.c new file mode 100644 index 0000000000..e256c4f709 --- /dev/null +++ b/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/kw_family/boardEnv/mvBoardEnvSpec.c @@ -0,0 +1,848 @@ +/******************************************************************************* +Copyright (C) Marvell International Ltd. and its affiliates + +This software file (the "File") is owned and distributed by Marvell +International Ltd. and/or its affiliates ("Marvell") under the following +alternative licensing terms. Once you have made an election to distribute the +File under one of the following license alternatives, please (i) delete this +introductory statement regarding license alternatives, (ii) delete the two +license alternatives that you have not elected to use and (iii) preserve the +Marvell copyright notice above. + +******************************************************************************** +Marvell Commercial License Option + +If you received this File from Marvell and you have entered into a commercial +license agreement (a "Commercial License") with Marvell, the File is licensed +to you under the terms of the applicable Commercial License. + +******************************************************************************** +Marvell GPL License Option + +If you received this File from Marvell, you may opt to use, redistribute and/or +modify this File in accordance with the terms and conditions of the General +Public License Version 2, June 1991 (the "GPL License"), a copy of which is +available along with the File in the license.txt file or by writing to the Free +Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or +on the worldwide web at http://www.gnu.org/licenses/gpl.txt. + +THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED +WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY +DISCLAIMED. The GPL License provides additional details about this warranty +disclaimer. +******************************************************************************** +Marvell BSD License Option + +If you received this File from Marvell, you may opt to use, redistribute and/or +modify this File under the following licensing terms. +Redistribution and use in source and binary forms, with or without modification, +are permitted provided that the following conditions are met: + + * Redistributions of source code must retain the above copyright notice, + this list of conditions and the following disclaimer. + + * Redistributions in binary form must reproduce the above copyright + notice, this list of conditions and the following disclaimer in the + documentation and/or other materials provided with the distribution. + + * Neither the name of Marvell nor the names of its contributors may be + used to endorse or promote products derived from this software without + specific prior written permission. + +THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND +ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED +WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE +DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR +ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES +(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; +LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON +ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS +SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + +*******************************************************************************/ +#include "mvCommon.h" +#include "mvBoardEnvLib.h" +#include "mvBoardEnvSpec.h" +#include "twsi/mvTwsi.h" + +#define DB_88F6281A_BOARD_PCI_IF_NUM 0x0 +#define DB_88F6281A_BOARD_TWSI_DEF_NUM 0x7 +#define DB_88F6281A_BOARD_MAC_INFO_NUM 0x2 +#define DB_88F6281A_BOARD_GPP_INFO_NUM 0x3 +#define DB_88F6281A_BOARD_MPP_CONFIG_NUM 0x1 +#define DB_88F6281A_BOARD_MPP_GROUP_TYPE_NUM 0x1 +#if defined(MV_NAND) && defined(MV_NAND_BOOT) + #define DB_88F6281A_BOARD_DEVICE_CONFIG_NUM 0x1 +#elif defined(MV_NAND) && defined(MV_SPI_BOOT) + #define DB_88F6281A_BOARD_DEVICE_CONFIG_NUM 0x2 +#else + #define DB_88F6281A_BOARD_DEVICE_CONFIG_NUM 0x1 +#endif +#define DB_88F6281A_BOARD_DEBUG_LED_NUM 0x0 + + +MV_BOARD_TWSI_INFO db88f6281AInfoBoardTwsiDev[] = + /* {{MV_BOARD_DEV_CLASS devClass, MV_U8 twsiDevAddr, MV_U8 twsiDevAddrType}} */ + { + {BOARD_DEV_TWSI_EXP, 0x20, ADDR7_BIT}, + {BOARD_DEV_TWSI_EXP, 0x21, ADDR7_BIT}, + {BOARD_DEV_TWSI_EXP, 0x27, ADDR7_BIT}, + {BOARD_DEV_TWSI_SATR, 0x4C, ADDR7_BIT}, + {BOARD_DEV_TWSI_SATR, 0x4D, ADDR7_BIT}, + {BOARD_DEV_TWSI_SATR, 0x4E, ADDR7_BIT}, + {BOARD_TWSI_AUDIO_DEC, 0x4A, ADDR7_BIT} + }; + +MV_BOARD_MAC_INFO db88f6281AInfoBoardMacInfo[] = + /* {{MV_BOARD_MAC_SPEED boardMacSpeed, MV_U8 boardEthSmiAddr}} */ + { + {BOARD_MAC_SPEED_AUTO, 0x8}, + {BOARD_MAC_SPEED_AUTO, 0x9} + }; + +MV_BOARD_MPP_TYPE_INFO db88f6281AInfoBoardMppTypeInfo[] = + /* {{MV_BOARD_MPP_TYPE_CLASS boardMppGroup1, + MV_BOARD_MPP_TYPE_CLASS boardMppGroup2}} */ + {{MV_BOARD_AUTO, MV_BOARD_AUTO} + }; + +MV_BOARD_GPP_INFO db88f6281AInfoBoardGppInfo[] = + /* {{MV_BOARD_GPP_CLASS devClass, MV_U8 gppPinNum}} */ + { + {BOARD_GPP_TSU_DIRCTION, 33} + /*muxed with TDM/Audio module via IOexpender + {BOARD_GPP_SDIO_DETECT, 38}, + {BOARD_GPP_USB_VBUS, 49}*/ + }; + +MV_DEV_CS_INFO db88f6281AInfoBoardDeCsInfo[] = + /*{deviceCS, params, devType, devWidth}*/ +#if defined(MV_NAND) && defined(MV_NAND_BOOT) + {{0, N_A, BOARD_DEV_NAND_FLASH, 8}}; /* NAND DEV */ +#elif defined(MV_NAND) && defined(MV_SPI_BOOT) + { + {0, N_A, BOARD_DEV_NAND_FLASH, 8}, /* NAND DEV */ + {1, N_A, BOARD_DEV_SPI_FLASH, 8}, /* SPI DEV */ + }; +#else + {{1, N_A, BOARD_DEV_SPI_FLASH, 8}}; /* SPI DEV */ +#endif + +MV_BOARD_MPP_INFO db88f6281AInfoBoardMppConfigValue[] = + {{{ + DB_88F6281A_MPP0_7, + DB_88F6281A_MPP8_15, + DB_88F6281A_MPP16_23, + DB_88F6281A_MPP24_31, + DB_88F6281A_MPP32_39, + DB_88F6281A_MPP40_47, + DB_88F6281A_MPP48_55 + }}}; + + +MV_BOARD_INFO db88f6281AInfo = { + "DB-88F6281A-BP", /* boardName[MAX_BOARD_NAME_LEN] */ + DB_88F6281A_BOARD_MPP_GROUP_TYPE_NUM, /* numBoardMppGroupType */ + db88f6281AInfoBoardMppTypeInfo, + DB_88F6281A_BOARD_MPP_CONFIG_NUM, /* numBoardMppConfig */ + db88f6281AInfoBoardMppConfigValue, + 0, /* intsGppMaskLow */ + 0, /* intsGppMaskHigh */ + DB_88F6281A_BOARD_DEVICE_CONFIG_NUM, /* numBoardDevIf */ + db88f6281AInfoBoardDeCsInfo, + DB_88F6281A_BOARD_TWSI_DEF_NUM, /* numBoardTwsiDev */ + db88f6281AInfoBoardTwsiDev, + DB_88F6281A_BOARD_MAC_INFO_NUM, /* numBoardMacInfo */ + db88f6281AInfoBoardMacInfo, + DB_88F6281A_BOARD_GPP_INFO_NUM, /* numBoardGppInfo */ + db88f6281AInfoBoardGppInfo, + DB_88F6281A_BOARD_DEBUG_LED_NUM, /* activeLedsNumber */ + NULL, + 0, /* ledsPolarity */ + DB_88F6281A_OE_LOW, /* gppOutEnLow */ + DB_88F6281A_OE_HIGH, /* gppOutEnHigh */ + DB_88F6281A_OE_VAL_LOW, /* gppOutValLow */ + DB_88F6281A_OE_VAL_HIGH, /* gppOutValHigh */ + 0, /* gppPolarityValLow */ + BIT6, /* gppPolarityValHigh */ + NULL /* pSwitchInfo */ +}; + + +#define RD_88F6281A_BOARD_PCI_IF_NUM 0x0 +#define RD_88F6281A_BOARD_TWSI_DEF_NUM 0x2 +#define RD_88F6281A_BOARD_MAC_INFO_NUM 0x2 +#define RD_88F6281A_BOARD_GPP_INFO_NUM 0x5 +#define RD_88F6281A_BOARD_MPP_GROUP_TYPE_NUM 0x1 +#define RD_88F6281A_BOARD_MPP_CONFIG_NUM 0x1 +#if defined(MV_NAND) && defined(MV_NAND_BOOT) + #define RD_88F6281A_BOARD_DEVICE_CONFIG_NUM 0x1 +#elif defined(MV_NAND) && defined(MV_SPI_BOOT) + #define RD_88F6281A_BOARD_DEVICE_CONFIG_NUM 0x2 +#else + #define RD_88F6281A_BOARD_DEVICE_CONFIG_NUM 0x1 +#endif +#define RD_88F6281A_BOARD_DEBUG_LED_NUM 0x0 + +MV_BOARD_MAC_INFO rd88f6281AInfoBoardMacInfo[] = + /* {{MV_BOARD_MAC_SPEED boardMacSpeed, MV_U8 boardEthSmiAddr}} */ + {{BOARD_MAC_SPEED_1000M, 0xa}, + {BOARD_MAC_SPEED_AUTO, 0xb} + }; + +MV_BOARD_SWITCH_INFO rd88f6281AInfoBoardSwitchInfo[] = + /* MV_32 linkStatusIrq, {MV_32 qdPort0, MV_32 qdPort1, MV_32 qdPort2, MV_32 qdPort3, MV_32 qdPort4}, + MV_32 qdCpuPort, MV_32 smiScanMode, MV_32 switchOnPort} */ + {{38, {0, 1, 2, 3, -1}, 5, 2, 0}, + {-1, {-1}, -1, -1, -1}}; + +MV_BOARD_TWSI_INFO rd88f6281AInfoBoardTwsiDev[] = + /* {{MV_BOARD_DEV_CLASS devClass, MV_U8 twsiDevAddr, MV_U8 twsiDevAddrType}} */ + { + {BOARD_DEV_TWSI_EXP, 0xFF, ADDR7_BIT}, /* dummy entry to align with modules indexes */ + {BOARD_DEV_TWSI_EXP, 0x27, ADDR7_BIT} + }; + +MV_BOARD_MPP_TYPE_INFO rd88f6281AInfoBoardMppTypeInfo[] = + {{MV_BOARD_RGMII, MV_BOARD_TDM} + }; + +MV_DEV_CS_INFO rd88f6281AInfoBoardDeCsInfo[] = + /*{deviceCS, params, devType, devWidth}*/ +#if defined(MV_NAND) && defined(MV_NAND_BOOT) + {{0, N_A, BOARD_DEV_NAND_FLASH, 8}}; /* NAND DEV */ +#elif defined(MV_NAND) && defined(MV_SPI_BOOT) + { + {0, N_A, BOARD_DEV_NAND_FLASH, 8}, /* NAND DEV */ + {1, N_A, BOARD_DEV_SPI_FLASH, 8}, /* SPI DEV */ + }; +#else + {{1, N_A, BOARD_DEV_SPI_FLASH, 8}}; /* SPI DEV */ +#endif + +MV_BOARD_GPP_INFO rd88f6281AInfoBoardGppInfo[] = + /* {{MV_BOARD_GPP_CLASS devClass, MV_U8 gppPinNum}} */ + {{BOARD_GPP_SDIO_DETECT, 28}, + {BOARD_GPP_USB_OC, 29}, + {BOARD_GPP_WPS_BUTTON, 35}, + {BOARD_GPP_MV_SWITCH, 38}, + {BOARD_GPP_USB_VBUS, 49} + }; + +MV_BOARD_MPP_INFO rd88f6281AInfoBoardMppConfigValue[] = + {{{ + RD_88F6281A_MPP0_7, + RD_88F6281A_MPP8_15, + RD_88F6281A_MPP16_23, + RD_88F6281A_MPP24_31, + RD_88F6281A_MPP32_39, + RD_88F6281A_MPP40_47, + RD_88F6281A_MPP48_55 + }}}; + +MV_BOARD_INFO rd88f6281AInfo = { + "RD-88F6281A", /* boardName[MAX_BOARD_NAME_LEN] */ + RD_88F6281A_BOARD_MPP_GROUP_TYPE_NUM, /* numBoardMppGroupType */ + rd88f6281AInfoBoardMppTypeInfo, + RD_88F6281A_BOARD_MPP_CONFIG_NUM, /* numBoardMppConfig */ + rd88f6281AInfoBoardMppConfigValue, + 0, /* intsGppMaskLow */ + (1 << 3), /* intsGppMaskHigh */ + RD_88F6281A_BOARD_DEVICE_CONFIG_NUM, /* numBoardDevIf */ + rd88f6281AInfoBoardDeCsInfo, + RD_88F6281A_BOARD_TWSI_DEF_NUM, /* numBoardTwsiDev */ + rd88f6281AInfoBoardTwsiDev, + RD_88F6281A_BOARD_MAC_INFO_NUM, /* numBoardMacInfo */ + rd88f6281AInfoBoardMacInfo, + RD_88F6281A_BOARD_GPP_INFO_NUM, /* numBoardGppInfo */ + rd88f6281AInfoBoardGppInfo, + RD_88F6281A_BOARD_DEBUG_LED_NUM, /* activeLedsNumber */ + NULL, + 0, /* ledsPolarity */ + RD_88F6281A_OE_LOW, /* gppOutEnLow */ + RD_88F6281A_OE_HIGH, /* gppOutEnHigh */ + RD_88F6281A_OE_VAL_LOW, /* gppOutValLow */ + RD_88F6281A_OE_VAL_HIGH, /* gppOutValHigh */ + 0, /* gppPolarityValLow */ + BIT6, /* gppPolarityValHigh */ + rd88f6281AInfoBoardSwitchInfo /* pSwitchInfo */ +}; + + +#define DB_88F6192A_BOARD_PCI_IF_NUM 0x0 +#define DB_88F6192A_BOARD_TWSI_DEF_NUM 0x7 +#define DB_88F6192A_BOARD_MAC_INFO_NUM 0x2 +#define DB_88F6192A_BOARD_GPP_INFO_NUM 0x3 +#define DB_88F6192A_BOARD_MPP_GROUP_TYPE_NUM 0x1 +#define DB_88F6192A_BOARD_MPP_CONFIG_NUM 0x1 +#if defined(MV_NAND) && defined(MV_NAND_BOOT) + #define DB_88F6192A_BOARD_DEVICE_CONFIG_NUM 0x1 +#elif defined(MV_NAND) && defined(MV_SPI_BOOT) + #define DB_88F6192A_BOARD_DEVICE_CONFIG_NUM 0x2 +#else + #define DB_88F6192A_BOARD_DEVICE_CONFIG_NUM 0x1 +#endif +#define DB_88F6192A_BOARD_DEBUG_LED_NUM 0x0 + +MV_BOARD_TWSI_INFO db88f6192AInfoBoardTwsiDev[] = + /* {{MV_BOARD_DEV_CLASS devClass, MV_U8 twsiDevAddr, MV_U8 twsiDevAddrType}} */ + { + {BOARD_DEV_TWSI_EXP, 0x20, ADDR7_BIT}, + {BOARD_DEV_TWSI_EXP, 0x21, ADDR7_BIT}, + {BOARD_DEV_TWSI_EXP, 0x27, ADDR7_BIT}, + {BOARD_DEV_TWSI_SATR, 0x4C, ADDR7_BIT}, + {BOARD_DEV_TWSI_SATR, 0x4D, ADDR7_BIT}, + {BOARD_DEV_TWSI_SATR, 0x4E, ADDR7_BIT}, + {BOARD_TWSI_AUDIO_DEC, 0x4A, ADDR7_BIT} + }; + +MV_BOARD_MAC_INFO db88f6192AInfoBoardMacInfo[] = + /* {{MV_BOARD_MAC_SPEED boardMacSpeed, MV_U8 boardEthSmiAddr}} */ + { + {BOARD_MAC_SPEED_AUTO, 0x8}, + {BOARD_MAC_SPEED_AUTO, 0x9} + }; + +MV_BOARD_MPP_TYPE_INFO db88f6192AInfoBoardMppTypeInfo[] = + /* {{MV_BOARD_MPP_TYPE_CLASS boardMppGroup1, + MV_BOARD_MPP_TYPE_CLASS boardMppGroup2}} */ + {{MV_BOARD_AUTO, MV_BOARD_OTHER} + }; + +MV_DEV_CS_INFO db88f6192AInfoBoardDeCsInfo[] = + /*{deviceCS, params, devType, devWidth}*/ +#if defined(MV_NAND) && defined(MV_NAND_BOOT) + {{0, N_A, BOARD_DEV_NAND_FLASH, 8}}; /* NAND DEV */ +#elif defined(MV_NAND) && defined(MV_SPI_BOOT) + { + {0, N_A, BOARD_DEV_NAND_FLASH, 8}, /* NAND DEV */ + {1, N_A, BOARD_DEV_SPI_FLASH, 8}, /* SPI DEV */ + }; +#else + {{1, N_A, BOARD_DEV_SPI_FLASH, 8}}; /* SPI DEV */ +#endif + +MV_BOARD_GPP_INFO db88f6192AInfoBoardGppInfo[] = + /* {{MV_BOARD_GPP_CLASS devClass, MV_U8 gppPinNum}} */ + { + {BOARD_GPP_SDIO_WP, 20}, + {BOARD_GPP_USB_VBUS, 22}, + {BOARD_GPP_SDIO_DETECT, 23}, + }; + +MV_BOARD_MPP_INFO db88f6192AInfoBoardMppConfigValue[] = + {{{ + DB_88F6192A_MPP0_7, + DB_88F6192A_MPP8_15, + DB_88F6192A_MPP16_23, + DB_88F6192A_MPP24_31, + DB_88F6192A_MPP32_35 + }}}; + +MV_BOARD_INFO db88f6192AInfo = { + "DB-88F6192A-BP", /* boardName[MAX_BOARD_NAME_LEN] */ + DB_88F6192A_BOARD_MPP_GROUP_TYPE_NUM, /* numBoardMppGroupType */ + db88f6192AInfoBoardMppTypeInfo, + DB_88F6192A_BOARD_MPP_CONFIG_NUM, /* numBoardMppConfig */ + db88f6192AInfoBoardMppConfigValue, + 0, /* intsGppMaskLow */ + (1 << 3), /* intsGppMaskHigh */ + DB_88F6192A_BOARD_DEVICE_CONFIG_NUM, /* numBoardDevIf */ + db88f6192AInfoBoardDeCsInfo, + DB_88F6192A_BOARD_TWSI_DEF_NUM, /* numBoardTwsiDev */ + db88f6192AInfoBoardTwsiDev, + DB_88F6192A_BOARD_MAC_INFO_NUM, /* numBoardMacInfo */ + db88f6192AInfoBoardMacInfo, + DB_88F6192A_BOARD_GPP_INFO_NUM, /* numBoardGppInfo */ + db88f6192AInfoBoardGppInfo, + DB_88F6192A_BOARD_DEBUG_LED_NUM, /* activeLedsNumber */ + NULL, + 0, /* ledsPolarity */ + DB_88F6192A_OE_LOW, /* gppOutEnLow */ + DB_88F6192A_OE_HIGH, /* gppOutEnHigh */ + DB_88F6192A_OE_VAL_LOW, /* gppOutValLow */ + DB_88F6192A_OE_VAL_HIGH, /* gppOutValHigh */ + 0, /* gppPolarityValLow */ + 0, /* gppPolarityValHigh */ + NULL /* pSwitchInfo */ +}; + +#define DB_88F6190A_BOARD_MAC_INFO_NUM 0x1 + +MV_BOARD_INFO db88f6190AInfo = { + "DB-88F6190A-BP", /* boardName[MAX_BOARD_NAME_LEN] */ + DB_88F6192A_BOARD_MPP_GROUP_TYPE_NUM, /* numBoardMppGroupType */ + db88f6192AInfoBoardMppTypeInfo, + DB_88F6192A_BOARD_MPP_CONFIG_NUM, /* numBoardMppConfig */ + db88f6192AInfoBoardMppConfigValue, + 0, /* intsGppMaskLow */ + (1 << 3), /* intsGppMaskHigh */ + DB_88F6192A_BOARD_DEVICE_CONFIG_NUM, /* numBoardDevIf */ + db88f6192AInfoBoardDeCsInfo, + DB_88F6192A_BOARD_TWSI_DEF_NUM, /* numBoardTwsiDev */ + db88f6192AInfoBoardTwsiDev, + DB_88F6190A_BOARD_MAC_INFO_NUM, /* numBoardMacInfo */ + db88f6192AInfoBoardMacInfo, + DB_88F6192A_BOARD_GPP_INFO_NUM, /* numBoardGppInfo */ + db88f6192AInfoBoardGppInfo, + DB_88F6192A_BOARD_DEBUG_LED_NUM, /* activeLedsNumber */ + NULL, + 0, /* ledsPolarity */ + DB_88F6192A_OE_LOW, /* gppOutEnLow */ + DB_88F6192A_OE_HIGH, /* gppOutEnHigh */ + DB_88F6192A_OE_VAL_LOW, /* gppOutValLow */ + DB_88F6192A_OE_VAL_HIGH, /* gppOutValHigh */ + 0, /* gppPolarityValLow */ + 0, /* gppPolarityValHigh */ + NULL /* pSwitchInfo */ +}; + +#define RD_88F6192A_BOARD_PCI_IF_NUM 0x0 +#define RD_88F6192A_BOARD_TWSI_DEF_NUM 0x0 +#define RD_88F6192A_BOARD_MAC_INFO_NUM 0x1 +#define RD_88F6192A_BOARD_GPP_INFO_NUM 0xE +#define RD_88F6192A_BOARD_MPP_GROUP_TYPE_NUM 0x1 +#define RD_88F6192A_BOARD_MPP_CONFIG_NUM 0x1 +#define RD_88F6192A_BOARD_DEVICE_CONFIG_NUM 0x1 +#define RD_88F6192A_BOARD_DEBUG_LED_NUM 0x3 + +MV_U8 rd88f6192AInfoBoardDebugLedIf[] = + {17, 28, 29}; + +MV_BOARD_MAC_INFO rd88f6192AInfoBoardMacInfo[] = + /* {{MV_BOARD_MAC_SPEED boardMacSpeed, MV_U8 boardEthSmiAddr}} */ + {{BOARD_MAC_SPEED_AUTO, 0x8} + }; + +MV_BOARD_MPP_TYPE_INFO rd88f6192AInfoBoardMppTypeInfo[] = + /* {{MV_BOARD_MPP_TYPE_CLASS boardMppGroup1, + MV_BOARD_MPP_TYPE_CLASS boardMppGroup2}} */ + {{MV_BOARD_OTHER, MV_BOARD_OTHER} + }; + +MV_DEV_CS_INFO rd88f6192AInfoBoardDeCsInfo[] = + /*{deviceCS, params, devType, devWidth}*/ + {{1, N_A, BOARD_DEV_SPI_FLASH, 8}}; /* SPI DEV */ + +MV_BOARD_GPP_INFO rd88f6192AInfoBoardGppInfo[] = + /* {{MV_BOARD_GPP_CLASS devClass, MV_U8 gppPinNum}} */ + { + {BOARD_GPP_USB_VBUS_EN, 10}, + {BOARD_GPP_USB_HOST_DEVICE, 11}, + {BOARD_GPP_RESET, 14}, + {BOARD_GPP_POWER_ON_LED, 15}, + {BOARD_GPP_HDD_POWER, 16}, + {BOARD_GPP_WPS_BUTTON, 24}, + {BOARD_GPP_TS_BUTTON_C, 25}, + {BOARD_GPP_USB_VBUS, 26}, + {BOARD_GPP_USB_OC, 27}, + {BOARD_GPP_TS_BUTTON_U, 30}, + {BOARD_GPP_TS_BUTTON_R, 31}, + {BOARD_GPP_TS_BUTTON_L, 32}, + {BOARD_GPP_TS_BUTTON_D, 34}, + {BOARD_GPP_FAN_POWER, 35} + }; + +MV_BOARD_MPP_INFO rd88f6192AInfoBoardMppConfigValue[] = + {{{ + RD_88F6192A_MPP0_7, + RD_88F6192A_MPP8_15, + RD_88F6192A_MPP16_23, + RD_88F6192A_MPP24_31, + RD_88F6192A_MPP32_35 + }}}; + +MV_BOARD_INFO rd88f6192AInfo = { + "RD-88F6192A-NAS", /* boardName[MAX_BOARD_NAME_LEN] */ + RD_88F6192A_BOARD_MPP_GROUP_TYPE_NUM, /* numBoardMppGroupType */ + rd88f6192AInfoBoardMppTypeInfo, + RD_88F6192A_BOARD_MPP_CONFIG_NUM, /* numBoardMppConfig */ + rd88f6192AInfoBoardMppConfigValue, + 0, /* intsGppMaskLow */ + (1 << 3), /* intsGppMaskHigh */ + RD_88F6192A_BOARD_DEVICE_CONFIG_NUM, /* numBoardDevIf */ + rd88f6192AInfoBoardDeCsInfo, + RD_88F6192A_BOARD_TWSI_DEF_NUM, /* numBoardTwsiDev */ + NULL, + RD_88F6192A_BOARD_MAC_INFO_NUM, /* numBoardMacInfo */ + rd88f6192AInfoBoardMacInfo, + RD_88F6192A_BOARD_GPP_INFO_NUM, /* numBoardGppInfo */ + rd88f6192AInfoBoardGppInfo, + RD_88F6192A_BOARD_DEBUG_LED_NUM, /* activeLedsNumber */ + rd88f6192AInfoBoardDebugLedIf, + 0, /* ledsPolarity */ + RD_88F6192A_OE_LOW, /* gppOutEnLow */ + RD_88F6192A_OE_HIGH, /* gppOutEnHigh */ + RD_88F6192A_OE_VAL_LOW, /* gppOutValLow */ + RD_88F6192A_OE_VAL_HIGH, /* gppOutValHigh */ + 0, /* gppPolarityValLow */ + 0, /* gppPolarityValHigh */ + NULL /* pSwitchInfo */ +}; + +MV_BOARD_INFO rd88f6190AInfo = { + "RD-88F6190A-NAS", /* boardName[MAX_BOARD_NAME_LEN] */ + RD_88F6192A_BOARD_MPP_GROUP_TYPE_NUM, /* numBoardMppGroupType */ + rd88f6192AInfoBoardMppTypeInfo, + RD_88F6192A_BOARD_MPP_CONFIG_NUM, /* numBoardMppConfig */ + rd88f6192AInfoBoardMppConfigValue, + 0, /* intsGppMaskLow */ + (1 << 3), /* intsGppMaskHigh */ + RD_88F6192A_BOARD_DEVICE_CONFIG_NUM, /* numBoardDevIf */ + rd88f6192AInfoBoardDeCsInfo, + RD_88F6192A_BOARD_TWSI_DEF_NUM, /* numBoardTwsiDev */ + NULL, + RD_88F6192A_BOARD_MAC_INFO_NUM, /* numBoardMacInfo */ + rd88f6192AInfoBoardMacInfo, + RD_88F6192A_BOARD_GPP_INFO_NUM, /* numBoardGppInfo */ + rd88f6192AInfoBoardGppInfo, + RD_88F6192A_BOARD_DEBUG_LED_NUM, /* activeLedsNumber */ + rd88f6192AInfoBoardDebugLedIf, + 0, /* ledsPolarity */ + RD_88F6192A_OE_LOW, /* gppOutEnLow */ + RD_88F6192A_OE_HIGH, /* gppOutEnHigh */ + RD_88F6192A_OE_VAL_LOW, /* gppOutValLow */ + RD_88F6192A_OE_VAL_HIGH, /* gppOutValHigh */ + 0, /* gppPolarityValLow */ + 0, /* gppPolarityValHigh */ + NULL /* pSwitchInfo */ +}; + +#define DB_88F6180A_BOARD_PCI_IF_NUM 0x0 +#define DB_88F6180A_BOARD_TWSI_DEF_NUM 0x5 +#define DB_88F6180A_BOARD_MAC_INFO_NUM 0x1 +#define DB_88F6180A_BOARD_GPP_INFO_NUM 0x0 +#define DB_88F6180A_BOARD_MPP_GROUP_TYPE_NUM 0x2 +#define DB_88F6180A_BOARD_MPP_CONFIG_NUM 0x1 +#define DB_88F6180A_BOARD_DEVICE_CONFIG_NUM 0x1 +#define DB_88F6180A_BOARD_DEBUG_LED_NUM 0x0 + +MV_BOARD_TWSI_INFO db88f6180AInfoBoardTwsiDev[] = + /* {{MV_BOARD_DEV_CLASS devClass, MV_U8 twsiDevAddr, MV_U8 twsiDevAddrType}} */ + { + {BOARD_DEV_TWSI_EXP, 0x20, ADDR7_BIT}, + {BOARD_DEV_TWSI_EXP, 0x21, ADDR7_BIT}, + {BOARD_DEV_TWSI_EXP, 0x27, ADDR7_BIT}, + {BOARD_DEV_TWSI_SATR, 0x4C, ADDR7_BIT}, + {BOARD_TWSI_AUDIO_DEC, 0x4A, ADDR7_BIT} + }; + +MV_BOARD_MAC_INFO db88f6180AInfoBoardMacInfo[] = + /* {{MV_BOARD_MAC_SPEED boardMacSpeed, MV_U8 boardEthSmiAddr}} */ + {{BOARD_MAC_SPEED_AUTO, 0x8} + }; + +MV_BOARD_GPP_INFO db88f6180AInfoBoardGppInfo[] = + /* {{MV_BOARD_GPP_CLASS devClass, MV_U8 gppPinNum}} */ + { + /* Muxed with TDM/Audio module via IOexpender + {BOARD_GPP_USB_VBUS, 6} */ + }; + +MV_BOARD_MPP_TYPE_INFO db88f6180AInfoBoardMppTypeInfo[] = + /* {{MV_BOARD_MPP_TYPE_CLASS boardMppGroup1, + MV_BOARD_MPP_TYPE_CLASS boardMppGroup2}} */ + {{MV_BOARD_OTHER, MV_BOARD_AUTO} + }; + +MV_DEV_CS_INFO db88f6180AInfoBoardDeCsInfo[] = + /*{deviceCS, params, devType, devWidth}*/ +#if defined(MV_NAND_BOOT) + {{0, N_A, BOARD_DEV_NAND_FLASH, 8}}; /* NAND DEV */ +#else + {{1, N_A, BOARD_DEV_SPI_FLASH, 8}}; /* SPI DEV */ +#endif + +MV_BOARD_MPP_INFO db88f6180AInfoBoardMppConfigValue[] = + {{{ + DB_88F6180A_MPP0_7, + DB_88F6180A_MPP8_15, + DB_88F6180A_MPP16_23, + DB_88F6180A_MPP24_31, + DB_88F6180A_MPP32_39, + DB_88F6180A_MPP40_44 + }}}; + +MV_BOARD_INFO db88f6180AInfo = { + "DB-88F6180A-BP", /* boardName[MAX_BOARD_NAME_LEN] */ + DB_88F6180A_BOARD_MPP_GROUP_TYPE_NUM, /* numBoardMppGroupType */ + db88f6180AInfoBoardMppTypeInfo, + DB_88F6180A_BOARD_MPP_CONFIG_NUM, /* numBoardMppConfig */ + db88f6180AInfoBoardMppConfigValue, + 0, /* intsGppMaskLow */ + 0, /* intsGppMaskHigh */ + DB_88F6180A_BOARD_DEVICE_CONFIG_NUM, /* numBoardDevIf */ + db88f6180AInfoBoardDeCsInfo, + DB_88F6180A_BOARD_TWSI_DEF_NUM, /* numBoardTwsiDev */ + db88f6180AInfoBoardTwsiDev, + DB_88F6180A_BOARD_MAC_INFO_NUM, /* numBoardMacInfo */ + db88f6180AInfoBoardMacInfo, + DB_88F6180A_BOARD_GPP_INFO_NUM, /* numBoardGppInfo */ + NULL, + DB_88F6180A_BOARD_DEBUG_LED_NUM, /* activeLedsNumber */ + NULL, + 0, /* ledsPolarity */ + DB_88F6180A_OE_LOW, /* gppOutEnLow */ + DB_88F6180A_OE_HIGH, /* gppOutEnHigh */ + DB_88F6180A_OE_VAL_LOW, /* gppOutValLow */ + DB_88F6180A_OE_VAL_HIGH, /* gppOutValHigh */ + 0, /* gppPolarityValLow */ + 0, /* gppPolarityValHigh */ + NULL /* pSwitchInfo */ +}; + + +#define RD_88F6281A_PCAC_BOARD_PCI_IF_NUM 0x0 +#define RD_88F6281A_PCAC_BOARD_TWSI_DEF_NUM 0x1 +#define RD_88F6281A_PCAC_BOARD_MAC_INFO_NUM 0x1 +#define RD_88F6281A_PCAC_BOARD_GPP_INFO_NUM 0x0 +#define RD_88F6281A_PCAC_BOARD_MPP_GROUP_TYPE_NUM 0x1 +#define RD_88F6281A_PCAC_BOARD_MPP_CONFIG_NUM 0x1 +#if defined(MV_NAND) && defined(MV_NAND_BOOT) + #define RD_88F6281A_PCAC_BOARD_DEVICE_CONFIG_NUM 0x1 +#elif defined(MV_NAND) && defined(MV_SPI_BOOT) + #define RD_88F6281A_PCAC_BOARD_DEVICE_CONFIG_NUM 0x2 +#else + #define RD_88F6281A_PCAC_BOARD_DEVICE_CONFIG_NUM 0x1 +#endif +#define RD_88F6281A_PCAC_BOARD_DEBUG_LED_NUM 0x4 + +MV_U8 rd88f6281APcacInfoBoardDebugLedIf[] = + {38, 39, 40, 41}; + +MV_BOARD_MAC_INFO rd88f6281APcacInfoBoardMacInfo[] = + /* {{MV_BOARD_MAC_SPEED boardMacSpeed, MV_U8 boardEthSmiAddr}} */ + {{BOARD_MAC_SPEED_AUTO, 0x8} + }; + +MV_BOARD_TWSI_INFO rd88f6281APcacInfoBoardTwsiDev[] = + /* {{MV_BOARD_DEV_CLASS devClass, MV_U8 twsiDevAddr, MV_U8 twsiDevAddrType}} */ + { + {BOARD_TWSI_OTHER, 0xa7, ADDR7_BIT} + }; + +MV_BOARD_MPP_TYPE_INFO rd88f6281APcacInfoBoardMppTypeInfo[] = + {{MV_BOARD_OTHER, MV_BOARD_OTHER} + }; + +MV_DEV_CS_INFO rd88f6281APcacInfoBoardDeCsInfo[] = + /*{deviceCS, params, devType, devWidth}*/ +#if defined(MV_NAND) && defined(MV_NAND_BOOT) + {{0, N_A, BOARD_DEV_NAND_FLASH, 8}}; /* NAND DEV */ +#elif defined(MV_NAND) && defined(MV_SPI_BOOT) + { + {0, N_A, BOARD_DEV_NAND_FLASH, 8}, /* NAND DEV */ + {1, N_A, BOARD_DEV_SPI_FLASH, 8}, /* SPI DEV */ + }; +#else + {{1, N_A, BOARD_DEV_SPI_FLASH, 8}}; /* SPI DEV */ +#endif + +MV_BOARD_MPP_INFO rd88f6281APcacInfoBoardMppConfigValue[] = + {{{ + RD_88F6281A_PCAC_MPP0_7, + RD_88F6281A_PCAC_MPP8_15, + RD_88F6281A_PCAC_MPP16_23, + RD_88F6281A_PCAC_MPP24_31, + RD_88F6281A_PCAC_MPP32_39, + RD_88F6281A_PCAC_MPP40_47, + RD_88F6281A_PCAC_MPP48_55 + }}}; + +MV_BOARD_INFO rd88f6281APcacInfo = { + "RD-88F6281A-PCAC", /* boardName[MAX_BOARD_NAME_LEN] */ + RD_88F6281A_PCAC_BOARD_MPP_GROUP_TYPE_NUM, /* numBoardMppGroupType */ + rd88f6281APcacInfoBoardMppTypeInfo, + RD_88F6281A_PCAC_BOARD_MPP_CONFIG_NUM, /* numBoardMppConfig */ + rd88f6281APcacInfoBoardMppConfigValue, + 0, /* intsGppMaskLow */ + (1 << 3), /* intsGppMaskHigh */ + RD_88F6281A_PCAC_BOARD_DEVICE_CONFIG_NUM, /* numBoardDevIf */ + rd88f6281APcacInfoBoardDeCsInfo, + RD_88F6281A_PCAC_BOARD_TWSI_DEF_NUM, /* numBoardTwsiDev */ + rd88f6281APcacInfoBoardTwsiDev, + RD_88F6281A_PCAC_BOARD_MAC_INFO_NUM, /* numBoardMacInfo */ + rd88f6281APcacInfoBoardMacInfo, + RD_88F6281A_PCAC_BOARD_GPP_INFO_NUM, /* numBoardGppInfo */ + 0, + RD_88F6281A_PCAC_BOARD_DEBUG_LED_NUM, /* activeLedsNumber */ + NULL, + 0, /* ledsPolarity */ + RD_88F6281A_PCAC_OE_LOW, /* gppOutEnLow */ + RD_88F6281A_PCAC_OE_HIGH, /* gppOutEnHigh */ + RD_88F6281A_PCAC_OE_VAL_LOW, /* gppOutValLow */ + RD_88F6281A_PCAC_OE_VAL_HIGH, /* gppOutValHigh */ + 0, /* gppPolarityValLow */ + 0, /* gppPolarityValHigh */ + NULL /* pSwitchInfo */ +}; + + +/* 6281 Sheeva Plug*/ + +#define SHEEVA_PLUG_BOARD_PCI_IF_NUM 0x0 +#define SHEEVA_PLUG_BOARD_TWSI_DEF_NUM 0x0 +#define SHEEVA_PLUG_BOARD_MAC_INFO_NUM 0x1 +#define SHEEVA_PLUG_BOARD_GPP_INFO_NUM 0x0 +#define SHEEVA_PLUG_BOARD_MPP_GROUP_TYPE_NUN 0x1 +#define SHEEVA_PLUG_BOARD_MPP_CONFIG_NUM 0x1 +#define SHEEVA_PLUG_BOARD_DEVICE_CONFIG_NUM 0x1 +#define SHEEVA_PLUG_BOARD_DEBUG_LED_NUM 0x1 + +MV_U8 sheevaPlugInfoBoardDebugLedIf[] = + {49}; + +MV_BOARD_MAC_INFO sheevaPlugInfoBoardMacInfo[] = + /* {{MV_BOARD_MAC_SPEED boardMacSpeed, MV_U8 boardEthSmiAddr}} */ + {{BOARD_MAC_SPEED_AUTO, 0x0}}; + +MV_BOARD_TWSI_INFO sheevaPlugInfoBoardTwsiDev[] = + /* {{MV_BOARD_DEV_CLASS devClass, MV_U8 twsiDevAddr, MV_U8 twsiDevAddrType}} */ + {{BOARD_TWSI_OTHER, 0x0, ADDR7_BIT}}; + +MV_BOARD_MPP_TYPE_INFO sheevaPlugInfoBoardMppTypeInfo[] = + {{MV_BOARD_OTHER, MV_BOARD_OTHER} + }; + +MV_DEV_CS_INFO sheevaPlugInfoBoardDeCsInfo[] = + /*{deviceCS, params, devType, devWidth}*/ + {{0, N_A, BOARD_DEV_NAND_FLASH, 8}}; /* NAND DEV */ + +MV_BOARD_MPP_INFO sheevaPlugInfoBoardMppConfigValue[] = + {{{ + RD_SHEEVA_PLUG_MPP0_7, + RD_SHEEVA_PLUG_MPP8_15, + RD_SHEEVA_PLUG_MPP16_23, + RD_SHEEVA_PLUG_MPP24_31, + RD_SHEEVA_PLUG_MPP32_39, + RD_SHEEVA_PLUG_MPP40_47, + RD_SHEEVA_PLUG_MPP48_55 + }}}; + +MV_BOARD_INFO sheevaPlugInfo = { + "SHEEVA PLUG", /* boardName[MAX_BOARD_NAME_LEN] */ + SHEEVA_PLUG_BOARD_MPP_GROUP_TYPE_NUN, /* numBoardMppGroupType */ + sheevaPlugInfoBoardMppTypeInfo, + SHEEVA_PLUG_BOARD_MPP_CONFIG_NUM, /* numBoardMppConfig */ + sheevaPlugInfoBoardMppConfigValue, + 0, /* intsGppMaskLow */ + 0, /* intsGppMaskHigh */ + SHEEVA_PLUG_BOARD_DEVICE_CONFIG_NUM, /* numBoardDevIf */ + sheevaPlugInfoBoardDeCsInfo, + SHEEVA_PLUG_BOARD_TWSI_DEF_NUM, /* numBoardTwsiDev */ + sheevaPlugInfoBoardTwsiDev, + SHEEVA_PLUG_BOARD_MAC_INFO_NUM, /* numBoardMacInfo */ + sheevaPlugInfoBoardMacInfo, + SHEEVA_PLUG_BOARD_GPP_INFO_NUM, /* numBoardGppInfo */ + 0, + SHEEVA_PLUG_BOARD_DEBUG_LED_NUM, /* activeLedsNumber */ + sheevaPlugInfoBoardDebugLedIf, + 0, /* ledsPolarity */ + RD_SHEEVA_PLUG_OE_LOW, /* gppOutEnLow */ + RD_SHEEVA_PLUG_OE_HIGH, /* gppOutEnHigh */ + RD_SHEEVA_PLUG_OE_VAL_LOW, /* gppOutValLow */ + RD_SHEEVA_PLUG_OE_VAL_HIGH, /* gppOutValHigh */ + 0, /* gppPolarityValLow */ + 0, /* gppPolarityValHigh */ + NULL /* pSwitchInfo */ +}; + +/* Customer specific board place holder*/ + +#define DB_CUSTOMER_BOARD_PCI_IF_NUM 0x0 +#define DB_CUSTOMER_BOARD_TWSI_DEF_NUM 0x0 +#define DB_CUSTOMER_BOARD_MAC_INFO_NUM 0x0 +#define DB_CUSTOMER_BOARD_GPP_INFO_NUM 0x0 +#define DB_CUSTOMER_BOARD_MPP_GROUP_TYPE_NUN 0x0 +#define DB_CUSTOMER_BOARD_MPP_CONFIG_NUM 0x0 +#if defined(MV_NAND) && defined(MV_NAND_BOOT) + #define DB_CUSTOMER_BOARD_DEVICE_CONFIG_NUM 0x0 +#elif defined(MV_NAND) && defined(MV_SPI_BOOT) + #define DB_CUSTOMER_BOARD_DEVICE_CONFIG_NUM 0x0 +#else + #define DB_CUSTOMER_BOARD_DEVICE_CONFIG_NUM 0x0 +#endif +#define DB_CUSTOMER_BOARD_DEBUG_LED_NUM 0x0 + +MV_U8 dbCustomerInfoBoardDebugLedIf[] = + {0}; + +MV_BOARD_MAC_INFO dbCustomerInfoBoardMacInfo[] = + /* {{MV_BOARD_MAC_SPEED boardMacSpeed, MV_U8 boardEthSmiAddr}} */ + {{BOARD_MAC_SPEED_AUTO, 0x0}}; + +MV_BOARD_TWSI_INFO dbCustomerInfoBoardTwsiDev[] = + /* {{MV_BOARD_DEV_CLASS devClass, MV_U8 twsiDevAddr, MV_U8 twsiDevAddrType}} */ + {{BOARD_TWSI_OTHER, 0x0, ADDR7_BIT}}; + +MV_BOARD_MPP_TYPE_INFO dbCustomerInfoBoardMppTypeInfo[] = + {{MV_BOARD_OTHER, MV_BOARD_OTHER} + }; + +MV_DEV_CS_INFO dbCustomerInfoBoardDeCsInfo[] = + /*{deviceCS, params, devType, devWidth}*/ +#if defined(MV_NAND) && defined(MV_NAND_BOOT) + {{0, N_A, BOARD_DEV_NAND_FLASH, 8}}; /* NAND DEV */ +#elif defined(MV_NAND) && defined(MV_SPI_BOOT) + { + {0, N_A, BOARD_DEV_NAND_FLASH, 8}, /* NAND DEV */ + {2, N_A, BOARD_DEV_SPI_FLASH, 8}, /* SPI DEV */ + }; +#else + {{2, N_A, BOARD_DEV_SPI_FLASH, 8}}; /* SPI DEV */ +#endif + +MV_BOARD_MPP_INFO dbCustomerInfoBoardMppConfigValue[] = + {{{ + DB_CUSTOMER_MPP0_7, + DB_CUSTOMER_MPP8_15, + DB_CUSTOMER_MPP16_23, + DB_CUSTOMER_MPP24_31, + DB_CUSTOMER_MPP32_39, + DB_CUSTOMER_MPP40_47, + DB_CUSTOMER_MPP48_55 + }}}; + +MV_BOARD_INFO dbCustomerInfo = { + "DB-CUSTOMER", /* boardName[MAX_BOARD_NAME_LEN] */ + DB_CUSTOMER_BOARD_MPP_GROUP_TYPE_NUN, /* numBoardMppGroupType */ + dbCustomerInfoBoardMppTypeInfo, + DB_CUSTOMER_BOARD_MPP_CONFIG_NUM, /* numBoardMppConfig */ + dbCustomerInfoBoardMppConfigValue, + 0, /* intsGppMaskLow */ + 0, /* intsGppMaskHigh */ + DB_CUSTOMER_BOARD_DEVICE_CONFIG_NUM, /* numBoardDevIf */ + dbCustomerInfoBoardDeCsInfo, + DB_CUSTOMER_BOARD_TWSI_DEF_NUM, /* numBoardTwsiDev */ + dbCustomerInfoBoardTwsiDev, + DB_CUSTOMER_BOARD_MAC_INFO_NUM, /* numBoardMacInfo */ + dbCustomerInfoBoardMacInfo, + DB_CUSTOMER_BOARD_GPP_INFO_NUM, /* numBoardGppInfo */ + 0, + DB_CUSTOMER_BOARD_DEBUG_LED_NUM, /* activeLedsNumber */ + NULL, + 0, /* ledsPolarity */ + DB_CUSTOMER_OE_LOW, /* gppOutEnLow */ + DB_CUSTOMER_OE_HIGH, /* gppOutEnHigh */ + DB_CUSTOMER_OE_VAL_LOW, /* gppOutValLow */ + DB_CUSTOMER_OE_VAL_HIGH, /* gppOutValHigh */ + 0, /* gppPolarityValLow */ + 0, /* gppPolarityValHigh */ + NULL /* pSwitchInfo */ +}; + +MV_BOARD_INFO* boardInfoTbl[] = { + &db88f6281AInfo, + &rd88f6281AInfo, + &db88f6192AInfo, + &rd88f6192AInfo, + &db88f6180AInfo, + &db88f6190AInfo, + &rd88f6190AInfo, + &rd88f6281APcacInfo, + &dbCustomerInfo, + &sheevaPlugInfo + }; + + diff --git a/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/kw_family/boardEnv/mvBoardEnvSpec.h b/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/kw_family/boardEnv/mvBoardEnvSpec.h new file mode 100644 index 0000000000..0372eee5dc --- /dev/null +++ b/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/kw_family/boardEnv/mvBoardEnvSpec.h @@ -0,0 +1,262 @@ +/******************************************************************************* +Copyright (C) Marvell International Ltd. and its affiliates + +This software file (the "File") is owned and distributed by Marvell +International Ltd. and/or its affiliates ("Marvell") under the following +alternative licensing terms. Once you have made an election to distribute the +File under one of the following license alternatives, please (i) delete this +introductory statement regarding license alternatives, (ii) delete the two +license alternatives that you have not elected to use and (iii) preserve the +Marvell copyright notice above. + +******************************************************************************** +Marvell Commercial License Option + +If you received this File from Marvell and you have entered into a commercial +license agreement (a "Commercial License") with Marvell, the File is licensed +to you under the terms of the applicable Commercial License. + +******************************************************************************** +Marvell GPL License Option + +If you received this File from Marvell, you may opt to use, redistribute and/or +modify this File in accordance with the terms and conditions of the General +Public License Version 2, June 1991 (the "GPL License"), a copy of which is +available along with the File in the license.txt file or by writing to the Free +Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or +on the worldwide web at http://www.gnu.org/licenses/gpl.txt. + +THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED +WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY +DISCLAIMED. The GPL License provides additional details about this warranty +disclaimer. +******************************************************************************** +Marvell BSD License Option + +If you received this File from Marvell, you may opt to use, redistribute and/or +modify this File under the following licensing terms. +Redistribution and use in source and binary forms, with or without modification, +are permitted provided that the following conditions are met: + + * Redistributions of source code must retain the above copyright notice, + this list of conditions and the following disclaimer. + + * Redistributions in binary form must reproduce the above copyright + notice, this list of conditions and the following disclaimer in the + documentation and/or other materials provided with the distribution. + + * Neither the name of Marvell nor the names of its contributors may be + used to endorse or promote products derived from this software without + specific prior written permission. + +THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND +ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED +WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE +DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR +ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES +(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; +LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON +ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS +SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + +*******************************************************************************/ + + +#ifndef __INCmvBoardEnvSpech +#define __INCmvBoardEnvSpech + +#include "mvSysHwConfig.h" + + +/* For future use */ +#define BD_ID_DATA_START_OFFS 0x0 +#define BD_DETECT_SEQ_OFFS 0x0 +#define BD_SYS_NUM_OFFS 0x4 +#define BD_NAME_OFFS 0x8 + +/* I2C bus addresses */ +#define MV_BOARD_CTRL_I2C_ADDR 0x0 /* Controller slave addr */ +#define MV_BOARD_CTRL_I2C_ADDR_TYPE ADDR7_BIT +#define MV_BOARD_DIMM0_I2C_ADDR 0x56 +#define MV_BOARD_DIMM0_I2C_ADDR_TYPE ADDR7_BIT +#define MV_BOARD_DIMM1_I2C_ADDR 0x54 +#define MV_BOARD_DIMM1_I2C_ADDR_TYPE ADDR7_BIT +#define MV_BOARD_EEPROM_I2C_ADDR 0x51 +#define MV_BOARD_EEPROM_I2C_ADDR_TYPE ADDR7_BIT +#define MV_BOARD_MAIN_EEPROM_I2C_ADDR 0x50 +#define MV_BOARD_MAIN_EEPROM_I2C_ADDR_TYPE ADDR7_BIT +#define MV_BOARD_MUX_I2C_ADDR_ENTRY 0x2 +#define MV_BOARD_DIMM_I2C_CHANNEL 0x0 + +#define BOOT_FLASH_INDEX 0 +#define MAIN_FLASH_INDEX 1 + +#define BOARD_ETH_START_PORT_NUM 0 + +/* Supported clocks */ +#define MV_BOARD_TCLK_100MHZ 100000000 +#define MV_BOARD_TCLK_125MHZ 125000000 +#define MV_BOARD_TCLK_133MHZ 133333333 +#define MV_BOARD_TCLK_150MHZ 150000000 +#define MV_BOARD_TCLK_166MHZ 166666667 +#define MV_BOARD_TCLK_200MHZ 200000000 + +#define MV_BOARD_SYSCLK_100MHZ 100000000 +#define MV_BOARD_SYSCLK_125MHZ 125000000 +#define MV_BOARD_SYSCLK_133MHZ 133333333 +#define MV_BOARD_SYSCLK_150MHZ 150000000 +#define MV_BOARD_SYSCLK_166MHZ 166666667 +#define MV_BOARD_SYSCLK_200MHZ 200000000 +#define MV_BOARD_SYSCLK_233MHZ 233333333 +#define MV_BOARD_SYSCLK_250MHZ 250000000 +#define MV_BOARD_SYSCLK_267MHZ 266666667 +#define MV_BOARD_SYSCLK_300MHZ 300000000 +#define MV_BOARD_SYSCLK_333MHZ 333333334 +#define MV_BOARD_SYSCLK_400MHZ 400000000 + +#define MV_BOARD_REFCLK_25MHZ 25000000 + +/* Board specific */ +/* =============================== */ + +/* boards ID numbers */ + +#define BOARD_ID_BASE 0x0 + +/* New board ID numbers */ +#define DB_88F6281A_BP_ID (BOARD_ID_BASE) +#define DB_88F6281_BP_MLL_ID 1680 +#define RD_88F6281A_ID (BOARD_ID_BASE+0x1) +#define RD_88F6281_MLL_ID 1682 +#define DB_88F6192A_BP_ID (BOARD_ID_BASE+0x2) +#define RD_88F6192A_ID (BOARD_ID_BASE+0x3) +#define RD_88F6192_MLL_ID 1681 +#define DB_88F6180A_BP_ID (BOARD_ID_BASE+0x4) +#define DB_88F6190A_BP_ID (BOARD_ID_BASE+0x5) +#define RD_88F6190A_ID (BOARD_ID_BASE+0x6) +#define RD_88F6281A_PCAC_ID (BOARD_ID_BASE+0x7) +#define DB_CUSTOMER_ID (BOARD_ID_BASE+0x8) +#define SHEEVA_PLUG_ID (BOARD_ID_BASE+0x9) +#define MV_MAX_BOARD_ID (SHEEVA_PLUG_ID + 1) + +/* DB-88F6281A-BP */ +#if defined(MV_NAND) + #define DB_88F6281A_MPP0_7 0x21111111 +#else + #define DB_88F6281A_MPP0_7 0x21112220 +#endif +#define DB_88F6281A_MPP8_15 0x11113311 +#define DB_88F6281A_MPP16_23 0x00551111 +#define DB_88F6281A_MPP24_31 0x00000000 +#define DB_88F6281A_MPP32_39 0x00000000 +#define DB_88F6281A_MPP40_47 0x00000000 +#define DB_88F6281A_MPP48_55 0x00000000 +#define DB_88F6281A_OE_LOW 0x0 +#if defined(MV_TDM_5CHANNELS) + #define DB_88F6281A_OE_HIGH (BIT6) +#else +#define DB_88F6281A_OE_HIGH 0x0 +#endif +#define DB_88F6281A_OE_VAL_LOW 0x0 +#define DB_88F6281A_OE_VAL_HIGH 0x0 + +/* RD-88F6281A */ +#if defined(MV_NAND) + #define RD_88F6281A_MPP0_7 0x21111111 +#else + #define RD_88F6281A_MPP0_7 0x21112220 +#endif +#define RD_88F6281A_MPP8_15 0x11113311 +#define RD_88F6281A_MPP16_23 0x33331111 +#define RD_88F6281A_MPP24_31 0x33003333 +#define RD_88F6281A_MPP32_39 0x20440533 +#define RD_88F6281A_MPP40_47 0x22202222 +#define RD_88F6281A_MPP48_55 0x00000002 +#define RD_88F6281A_OE_LOW (BIT28 | BIT29) +#define RD_88F6281A_OE_HIGH (BIT3 | BIT6 | BIT17) +#define RD_88F6281A_OE_VAL_LOW 0x0 +#define RD_88F6281A_OE_VAL_HIGH 0x0 + +/* DB-88F6192A-BP */ +#if defined(MV_NAND) + #define DB_88F6192A_MPP0_7 0x21111111 +#else + #define DB_88F6192A_MPP0_7 0x21112220 +#endif +#define DB_88F6192A_MPP8_15 0x11113311 +#define DB_88F6192A_MPP16_23 0x00501111 +#define DB_88F6192A_MPP24_31 0x00000000 +#define DB_88F6192A_MPP32_35 0x00000000 +#define DB_88F6192A_OE_LOW (BIT22 | BIT23) +#define DB_88F6192A_OE_HIGH 0x0 +#define DB_88F6192A_OE_VAL_LOW 0x0 +#define DB_88F6192A_OE_VAL_HIGH 0x0 + +/* RD-88F6192A */ +#define RD_88F6192A_MPP0_7 0x01222222 +#define RD_88F6192A_MPP8_15 0x00000011 +#define RD_88F6192A_MPP16_23 0x05550000 +#define RD_88F6192A_MPP24_31 0x0 +#define RD_88F6192A_MPP32_35 0x0 +#define RD_88F6192A_OE_LOW (BIT11 | BIT14 | BIT24 | BIT25 | BIT26 | BIT27 | BIT30 | BIT31) +#define RD_88F6192A_OE_HIGH (BIT0 | BIT2) +#define RD_88F6192A_OE_VAL_LOW 0x18400 +#define RD_88F6192A_OE_VAL_HIGH 0x8 + +/* DB-88F6180A-BP */ +#if defined(MV_NAND) + #define DB_88F6180A_MPP0_7 0x21111111 +#else + #define DB_88F6180A_MPP0_7 0x01112222 +#endif +#define DB_88F6180A_MPP8_15 0x11113311 +#define DB_88F6180A_MPP16_23 0x00001111 +#define DB_88F6180A_MPP24_31 0x0 +#define DB_88F6180A_MPP32_39 0x4444c000 +#define DB_88F6180A_MPP40_44 0x00044444 +#define DB_88F6180A_OE_LOW 0x0 +#define DB_88F6180A_OE_HIGH 0x0 +#define DB_88F6180A_OE_VAL_LOW 0x0 +#define DB_88F6180A_OE_VAL_HIGH 0x0 + +/* RD-88F6281A_PCAC */ +#define RD_88F6281A_PCAC_MPP0_7 0x21111111 +#define RD_88F6281A_PCAC_MPP8_15 0x00003311 +#define RD_88F6281A_PCAC_MPP16_23 0x00001100 +#define RD_88F6281A_PCAC_MPP24_31 0x00000000 +#define RD_88F6281A_PCAC_MPP32_39 0x00000000 +#define RD_88F6281A_PCAC_MPP40_47 0x00000000 +#define RD_88F6281A_PCAC_MPP48_55 0x00000000 +#define RD_88F6281A_PCAC_OE_LOW 0x0 +#define RD_88F6281A_PCAC_OE_HIGH 0x0 +#define RD_88F6281A_PCAC_OE_VAL_LOW 0x0 +#define RD_88F6281A_PCAC_OE_VAL_HIGH 0x0 + +/* SHEEVA PLUG */ +#define RD_SHEEVA_PLUG_MPP0_7 0x01111111 +#define RD_SHEEVA_PLUG_MPP8_15 0x11113322 +#define RD_SHEEVA_PLUG_MPP16_23 0x00001111 +#define RD_SHEEVA_PLUG_MPP24_31 0x00100000 +#define RD_SHEEVA_PLUG_MPP32_39 0x00000000 +#define RD_SHEEVA_PLUG_MPP40_47 0x00000000 +#define RD_SHEEVA_PLUG_MPP48_55 0x00000000 +#define RD_SHEEVA_PLUG_OE_LOW 0x0 +#define RD_SHEEVA_PLUG_OE_HIGH 0x0 +#define RD_SHEEVA_PLUG_OE_VAL_LOW (BIT29) +#define RD_SHEEVA_PLUG_OE_VAL_HIGH ((~(BIT17 | BIT16 | BIT15)) | BIT14) + +/* DB-CUSTOMER */ +#define DB_CUSTOMER_MPP0_7 0x21111111 +#define DB_CUSTOMER_MPP8_15 0x00003311 +#define DB_CUSTOMER_MPP16_23 0x00001100 +#define DB_CUSTOMER_MPP24_31 0x00000000 +#define DB_CUSTOMER_MPP32_39 0x00000000 +#define DB_CUSTOMER_MPP40_47 0x00000000 +#define DB_CUSTOMER_MPP48_55 0x00000000 +#define DB_CUSTOMER_OE_LOW 0x0 +#define DB_CUSTOMER_OE_HIGH (~((BIT6) | (BIT7) | (BIT8) | (BIT9))) +#define DB_CUSTOMER_OE_VAL_LOW 0x0 +#define DB_CUSTOMER_OE_VAL_HIGH 0x0 + +#endif /* __INCmvBoardEnvSpech */ diff --git a/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/kw_family/cpu/mvCpu.c b/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/kw_family/cpu/mvCpu.c new file mode 100644 index 0000000000..fed0fa114e --- /dev/null +++ b/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/kw_family/cpu/mvCpu.c @@ -0,0 +1,320 @@ +/******************************************************************************* +Copyright (C) Marvell International Ltd. and its affiliates + +This software file (the "File") is owned and distributed by Marvell +International Ltd. and/or its affiliates ("Marvell") under the following +alternative licensing terms. Once you have made an election to distribute the +File under one of the following license alternatives, please (i) delete this +introductory statement regarding license alternatives, (ii) delete the two +license alternatives that you have not elected to use and (iii) preserve the +Marvell copyright notice above. + +******************************************************************************** +Marvell Commercial License Option + +If you received this File from Marvell and you have entered into a commercial +license agreement (a "Commercial License") with Marvell, the File is licensed +to you under the terms of the applicable Commercial License. + +******************************************************************************** +Marvell GPL License Option + +If you received this File from Marvell, you may opt to use, redistribute and/or +modify this File in accordance with the terms and conditions of the General +Public License Version 2, June 1991 (the "GPL License"), a copy of which is +available along with the File in the license.txt file or by writing to the Free +Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or +on the worldwide web at http://www.gnu.org/licenses/gpl.txt. + +THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED +WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY +DISCLAIMED. The GPL License provides additional details about this warranty +disclaimer. +******************************************************************************** +Marvell BSD License Option + +If you received this File from Marvell, you may opt to use, redistribute and/or +modify this File under the following licensing terms. +Redistribution and use in source and binary forms, with or without modification, +are permitted provided that the following conditions are met: + + * Redistributions of source code must retain the above copyright notice, + this list of conditions and the following disclaimer. + + * Redistributions in binary form must reproduce the above copyright + notice, this list of conditions and the following disclaimer in the + documentation and/or other materials provided with the distribution. + + * Neither the name of Marvell nor the names of its contributors may be + used to endorse or promote products derived from this software without + specific prior written permission. + +THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND +ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED +WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE +DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR +ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES +(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; +LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON +ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS +SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + +*******************************************************************************/ + + +#include "cpu/mvCpu.h" +#include "ctrlEnv/mvCtrlEnvLib.h" +#include "ctrlEnv/mvCtrlEnvRegs.h" +#include "ctrlEnv/sys/mvCpuIfRegs.h" + +/* defines */ +#ifdef MV_DEBUG + #define DB(x) x +#else + #define DB(x) +#endif + +/* locals */ + +/******************************************************************************* +* mvCpuPclkGet - Get the CPU pClk (pipe clock) +* +* DESCRIPTION: +* This routine extract the CPU core clock. +* +* INPUT: +* None. +* +* OUTPUT: +* None. +* +* RETURN: +* 32bit clock cycles in MHertz. +* +*******************************************************************************/ +/* 6180 have different clk reset sampling */ + +static MV_U32 mvCpu6180PclkGet(MV_VOID) +{ + MV_U32 tmpPClkRate=0; + MV_CPU_ARM_CLK cpu6180_ddr_l2_CLK[] = MV_CPU6180_DDR_L2_CLCK_TBL; + + tmpPClkRate = MV_REG_READ(MPP_SAMPLE_AT_RESET); + tmpPClkRate = tmpPClkRate & MSAR_CPUCLCK_MASK_6180; + tmpPClkRate = tmpPClkRate >> MSAR_CPUCLCK_OFFS_6180; + + tmpPClkRate = cpu6180_ddr_l2_CLK[tmpPClkRate].cpuClk; + + return tmpPClkRate; +} + + +MV_U32 mvCpuPclkGet(MV_VOID) +{ +#if defined(PCLCK_AUTO_DETECT) + MV_U32 tmpPClkRate=0; + MV_U32 cpuCLK[] = MV_CPU_CLCK_TBL; + + if(mvCtrlModelGet() == MV_6180_DEV_ID) + return mvCpu6180PclkGet(); + + tmpPClkRate = MV_REG_READ(MPP_SAMPLE_AT_RESET); + tmpPClkRate = MSAR_CPUCLCK_EXTRACT(tmpPClkRate); + tmpPClkRate = cpuCLK[tmpPClkRate]; + + return tmpPClkRate; +#else + return MV_DEFAULT_PCLK +#endif +} + +/******************************************************************************* +* mvCpuL2ClkGet - Get the CPU L2 (CPU bus clock) +* +* DESCRIPTION: +* This routine extract the CPU L2 clock. +* +* RETURN: +* 32bit clock cycles in Hertz. +* +*******************************************************************************/ +static MV_U32 mvCpu6180L2ClkGet(MV_VOID) +{ + MV_U32 L2ClkRate=0; + MV_CPU_ARM_CLK _cpu6180_ddr_l2_CLK[] = MV_CPU6180_DDR_L2_CLCK_TBL; + + L2ClkRate = MV_REG_READ(MPP_SAMPLE_AT_RESET); + L2ClkRate = L2ClkRate & MSAR_CPUCLCK_MASK_6180; + L2ClkRate = L2ClkRate >> MSAR_CPUCLCK_OFFS_6180; + + L2ClkRate = _cpu6180_ddr_l2_CLK[L2ClkRate].l2Clk; + + return L2ClkRate; + +} + +MV_U32 mvCpuL2ClkGet(MV_VOID) +{ +#ifdef L2CLK_AUTO_DETECT + MV_U32 L2ClkRate, tmp, pClkRate, indexL2Rtio; + MV_U32 L2Rtio[][2] = MV_L2_CLCK_RTIO_TBL; + + if(mvCtrlModelGet() == MV_6180_DEV_ID) + return mvCpu6180L2ClkGet(); + + pClkRate = mvCpuPclkGet(); + + tmp = MV_REG_READ(MPP_SAMPLE_AT_RESET); + indexL2Rtio = MSAR_L2CLCK_EXTRACT(tmp); + + L2ClkRate = ((pClkRate * L2Rtio[indexL2Rtio][1]) / L2Rtio[indexL2Rtio][0]); + + return L2ClkRate; +#else + return MV_BOARD_DEFAULT_L2CLK; +#endif +} + + +/******************************************************************************* +* mvCpuNameGet - Get CPU name +* +* DESCRIPTION: +* This function returns a string describing the CPU model and revision. +* +* INPUT: +* None. +* +* OUTPUT: +* pNameBuff - Buffer to contain board name string. Minimum size 32 chars. +* +* RETURN: +* None. +*******************************************************************************/ +MV_VOID mvCpuNameGet(char *pNameBuff) +{ + MV_U32 cpuModel; + + cpuModel = mvOsCpuPartGet(); + + /* The CPU module is indicated in the Processor Version Register (PVR) */ + switch(cpuModel) + { + case CPU_PART_MRVL131: + mvOsSPrintf(pNameBuff, "%s (Rev %d)", "Marvell Feroceon",mvOsCpuRevGet()); + break; + case CPU_PART_ARM926: + mvOsSPrintf(pNameBuff, "%s (Rev %d)", "ARM926",mvOsCpuRevGet()); + break; + case CPU_PART_ARM946: + mvOsSPrintf(pNameBuff, "%s (Rev %d)", "ARM946",mvOsCpuRevGet()); + break; + default: + mvOsSPrintf(pNameBuff,"??? (0x%04x) (Rev %d)",cpuModel,mvOsCpuRevGet()); + break; + } /* switch */ + + return; +} + + +#define MV_PROC_STR_SIZE 50 + +static void mvCpuIfGetL2EccMode(MV_8 *buf) +{ + MV_U32 regVal = MV_REG_READ(CPU_L2_CONFIG_REG); + if (regVal & BIT2) + mvOsSPrintf(buf, "L2 ECC Enabled"); + else + mvOsSPrintf(buf, "L2 ECC Disabled"); +} + +static void mvCpuIfGetL2Mode(MV_8 *buf) +{ + MV_U32 regVal = 0; + __asm volatile ("mrc p15, 1, %0, c15, c1, 0" : "=r" (regVal)); /* Read Marvell extra features register */ + if (regVal & BIT22) + mvOsSPrintf(buf, "L2 Enabled"); + else + mvOsSPrintf(buf, "L2 Disabled"); +} + +static void mvCpuIfGetL2PrefetchMode(MV_8 *buf) +{ + MV_U32 regVal = 0; + __asm volatile ("mrc p15, 1, %0, c15, c1, 0" : "=r" (regVal)); /* Read Marvell extra features register */ + if (regVal & BIT24) + mvOsSPrintf(buf, "L2 Prefetch Disabled"); + else + mvOsSPrintf(buf, "L2 Prefetch Enabled"); +} + +static void mvCpuIfGetWriteAllocMode(MV_8 *buf) +{ + MV_U32 regVal = 0; + __asm volatile ("mrc p15, 1, %0, c15, c1, 0" : "=r" (regVal)); /* Read Marvell extra features register */ + if (regVal & BIT28) + mvOsSPrintf(buf, "Write Allocate Enabled"); + else + mvOsSPrintf(buf, "Write Allocate Disabled"); +} + +static void mvCpuIfGetCpuStreamMode(MV_8 *buf) +{ + MV_U32 regVal = 0; + __asm volatile ("mrc p15, 1, %0, c15, c1, 0" : "=r" (regVal)); /* Read Marvell extra features register */ + if (regVal & BIT29) + mvOsSPrintf(buf, "CPU Streaming Enabled"); + else + mvOsSPrintf(buf, "CPU Streaming Disabled"); +} + +static void mvCpuIfPrintCpuRegs(void) +{ + MV_U32 regVal = 0; + + __asm volatile ("mrc p15, 1, %0, c15, c1, 0" : "=r" (regVal)); /* Read Marvell extra features register */ + mvOsPrintf("Extra Feature Reg = 0x%x\n",regVal); + + __asm volatile ("mrc p15, 0, %0, c1, c0, 0" : "=r" (regVal)); /* Read Control register */ + mvOsPrintf("Control Reg = 0x%x\n",regVal); + + __asm volatile ("mrc p15, 0, %0, c0, c0, 0" : "=r" (regVal)); /* Read ID Code register */ + mvOsPrintf("ID Code Reg = 0x%x\n",regVal); + + __asm volatile ("mrc p15, 0, %0, c0, c0, 1" : "=r" (regVal)); /* Read Cache Type register */ + mvOsPrintf("Cache Type Reg = 0x%x\n",regVal); + +} + +MV_U32 mvCpuIfPrintSystemConfig(MV_8 *buffer, MV_U32 index) +{ + MV_U32 count = 0; + + MV_8 L2_ECC_str[MV_PROC_STR_SIZE]; + MV_8 L2_En_str[MV_PROC_STR_SIZE]; + MV_8 L2_Prefetch_str[MV_PROC_STR_SIZE]; + MV_8 Write_Alloc_str[MV_PROC_STR_SIZE]; + MV_8 Cpu_Stream_str[MV_PROC_STR_SIZE]; + + mvCpuIfGetL2Mode(L2_En_str); + mvCpuIfGetL2EccMode(L2_ECC_str); + mvCpuIfGetL2PrefetchMode(L2_Prefetch_str); + mvCpuIfGetWriteAllocMode(Write_Alloc_str); + mvCpuIfGetCpuStreamMode(Cpu_Stream_str); + mvCpuIfPrintCpuRegs(); + + count += mvOsSPrintf(buffer + count + index, "%s\n", L2_En_str); + count += mvOsSPrintf(buffer + count + index, "%s\n", L2_ECC_str); + count += mvOsSPrintf(buffer + count + index, "%s\n", L2_Prefetch_str); + count += mvOsSPrintf(buffer + count + index, "%s\n", Write_Alloc_str); + count += mvOsSPrintf(buffer + count + index, "%s\n", Cpu_Stream_str); + return count; +} + +MV_U32 whoAmI(MV_VOID) +{ + return 0; +} + diff --git a/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/kw_family/cpu/mvCpu.h b/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/kw_family/cpu/mvCpu.h new file mode 100644 index 0000000000..7f58b03f1f --- /dev/null +++ b/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/kw_family/cpu/mvCpu.h @@ -0,0 +1,99 @@ +/******************************************************************************* +Copyright (C) Marvell International Ltd. and its affiliates + +This software file (the "File") is owned and distributed by Marvell +International Ltd. and/or its affiliates ("Marvell") under the following +alternative licensing terms. Once you have made an election to distribute the +File under one of the following license alternatives, please (i) delete this +introductory statement regarding license alternatives, (ii) delete the two +license alternatives that you have not elected to use and (iii) preserve the +Marvell copyright notice above. + +******************************************************************************** +Marvell Commercial License Option + +If you received this File from Marvell and you have entered into a commercial +license agreement (a "Commercial License") with Marvell, the File is licensed +to you under the terms of the applicable Commercial License. + +******************************************************************************** +Marvell GPL License Option + +If you received this File from Marvell, you may opt to use, redistribute and/or +modify this File in accordance with the terms and conditions of the General +Public License Version 2, June 1991 (the "GPL License"), a copy of which is +available along with the File in the license.txt file or by writing to the Free +Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or +on the worldwide web at http://www.gnu.org/licenses/gpl.txt. + +THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED +WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY +DISCLAIMED. The GPL License provides additional details about this warranty +disclaimer. +******************************************************************************** +Marvell BSD License Option + +If you received this File from Marvell, you may opt to use, redistribute and/or +modify this File under the following licensing terms. +Redistribution and use in source and binary forms, with or without modification, +are permitted provided that the following conditions are met: + + * Redistributions of source code must retain the above copyright notice, + this list of conditions and the following disclaimer. + + * Redistributions in binary form must reproduce the above copyright + notice, this list of conditions and the following disclaimer in the + documentation and/or other materials provided with the distribution. + + * Neither the name of Marvell nor the names of its contributors may be + used to endorse or promote products derived from this software without + specific prior written permission. + +THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND +ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED +WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE +DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR +ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES +(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; +LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON +ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS +SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + +*******************************************************************************/ + + +#ifndef __INCmvCpuh +#define __INCmvCpuh + +#include "mvCommon.h" +#include "mvOs.h" +#include "ctrlEnv/mvCtrlEnvSpec.h" + +/* defines */ +#define CPU_PART_MRVL131 0x131 +#define CPU_PART_ARM926 0x926 +#define CPU_PART_ARM946 0x946 +#define MV_CPU_ARM_CLK_ELM_SIZE 12 +#define MV_CPU_ARM_CLK_RATIO_OFF 8 +#define MV_CPU_ARM_CLK_DDR_OFF 4 + +#ifndef MV_ASMLANGUAGE +typedef struct _mvCpuArmClk +{ + MV_U32 cpuClk; /* CPU clock in MHz */ + MV_U32 ddrClk; /* DDR clock in MHz */ + MV_U32 l2Clk; /* CPU DDR clock ratio */ + +}MV_CPU_ARM_CLK; + +MV_U32 mvCpuPclkGet(MV_VOID); +MV_VOID mvCpuNameGet(char *pNameBuff); +MV_U32 mvCpuL2ClkGet(MV_VOID); +MV_U32 mvCpuIfPrintSystemConfig(MV_8 *buffer, MV_U32 index); +MV_U32 whoAmI(MV_VOID); + +#endif /* MV_ASMLANGUAGE */ + + +#endif /* __INCmvCpuh */ diff --git a/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/kw_family/ctrlEnv/mvCtrlEnvAddrDec.c b/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/kw_family/ctrlEnv/mvCtrlEnvAddrDec.c new file mode 100644 index 0000000000..2d148e0fc9 --- /dev/null +++ b/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/kw_family/ctrlEnv/mvCtrlEnvAddrDec.c @@ -0,0 +1,296 @@ +/******************************************************************************* +Copyright (C) Marvell International Ltd. and its affiliates + +This software file (the "File") is owned and distributed by Marvell +International Ltd. and/or its affiliates ("Marvell") under the following +alternative licensing terms. Once you have made an election to distribute the +File under one of the following license alternatives, please (i) delete this +introductory statement regarding license alternatives, (ii) delete the two +license alternatives that you have not elected to use and (iii) preserve the +Marvell copyright notice above. + +******************************************************************************** +Marvell Commercial License Option + +If you received this File from Marvell and you have entered into a commercial +license agreement (a "Commercial License") with Marvell, the File is licensed +to you under the terms of the applicable Commercial License. + +******************************************************************************** +Marvell GPL License Option + +If you received this File from Marvell, you may opt to use, redistribute and/or +modify this File in accordance with the terms and conditions of the General +Public License Version 2, June 1991 (the "GPL License"), a copy of which is +available along with the File in the license.txt file or by writing to the Free +Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or +on the worldwide web at http://www.gnu.org/licenses/gpl.txt. + +THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED +WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY +DISCLAIMED. The GPL License provides additional details about this warranty +disclaimer. +******************************************************************************** +Marvell BSD License Option + +If you received this File from Marvell, you may opt to use, redistribute and/or +modify this File under the following licensing terms. +Redistribution and use in source and binary forms, with or without modification, +are permitted provided that the following conditions are met: + + * Redistributions of source code must retain the above copyright notice, + this list of conditions and the following disclaimer. + + * Redistributions in binary form must reproduce the above copyright + notice, this list of conditions and the following disclaimer in the + documentation and/or other materials provided with the distribution. + + * Neither the name of Marvell nor the names of its contributors may be + used to endorse or promote products derived from this software without + specific prior written permission. + +THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND +ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED +WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE +DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR +ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES +(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; +LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON +ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS +SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + +*******************************************************************************/ + +/******************************************************************************* +* mvCtrlEnvAddrDec.h - Marvell controller address decode library +* +* DESCRIPTION: +* +* DEPENDENCIES: +* None. +* +*******************************************************************************/ + +/* includes */ +#include "ctrlEnv/mvCtrlEnvAddrDec.h" +#include "ctrlEnv/sys/mvAhbToMbusRegs.h" +#include "ddr2/mvDramIfRegs.h" +#include "pex/mvPexRegs.h" + +#define MV_DEBUG + +/* defines */ +#ifdef MV_DEBUG + #define DB(x) x +#else + #define DB(x) +#endif + +/* Default Attributes array */ +MV_TARGET_ATTRIB mvTargetDefaultsArray[] = TARGETS_DEF_ARRAY; +extern MV_TARGET *sampleAtResetTargetArray; +/* Dram\AHBToMbus\PEX share regsiter */ + +#define CTRL_DEC_BASE_OFFS 16 +#define CTRL_DEC_BASE_MASK (0xffff << CTRL_DEC_BASE_OFFS) +#define CTRL_DEC_BASE_ALIGNMENT 0x10000 + +#define CTRL_DEC_SIZE_OFFS 16 +#define CTRL_DEC_SIZE_MASK (0xffff << CTRL_DEC_SIZE_OFFS) +#define CTRL_DEC_SIZE_ALIGNMENT 0x10000 + +#define CTRL_DEC_WIN_EN BIT0 + + + +/******************************************************************************* +* mvCtrlAddrDecToReg - Get address decode register format values +* +* DESCRIPTION: +* +* INPUT: +* +* OUTPUT: +* +* RETURN: +* +*******************************************************************************/ +MV_STATUS mvCtrlAddrDecToReg(MV_ADDR_WIN *pAddrDecWin, MV_DEC_REGS *pAddrDecRegs) +{ + + MV_U32 baseToReg=0 , sizeToReg=0; + + /* BaseLow[31:16] => base register [31:16] */ + baseToReg = pAddrDecWin->baseLow & CTRL_DEC_BASE_MASK; + + /* Write to address decode Base Address Register */ + pAddrDecRegs->baseReg &= ~CTRL_DEC_BASE_MASK; + pAddrDecRegs->baseReg |= baseToReg; + + /* Get size register value according to window size */ + sizeToReg = ctrlSizeToReg(pAddrDecWin->size, CTRL_DEC_SIZE_ALIGNMENT); + + /* Size parameter validity check. */ + if (-1 == sizeToReg) + { + return MV_BAD_PARAM; + } + + /* set size */ + pAddrDecRegs->sizeReg &= ~CTRL_DEC_SIZE_MASK; + pAddrDecRegs->sizeReg |= (sizeToReg << CTRL_DEC_SIZE_OFFS); + + + return MV_OK; + +} + +/******************************************************************************* +* mvCtrlRegToAddrDec - Extract address decode struct from registers. +* +* DESCRIPTION: +* This function extract address decode struct from address decode +* registers given as parameters. +* +* INPUT: +* pAddrDecRegs - Address decode register struct. +* +* OUTPUT: +* pAddrDecWin - Target window data structure. +* +* RETURN: +* MV_BAD_PARAM if address decode registers data is invalid. +* +*******************************************************************************/ +MV_STATUS mvCtrlRegToAddrDec(MV_DEC_REGS *pAddrDecRegs, MV_ADDR_WIN *pAddrDecWin) +{ + MV_U32 sizeRegVal; + + sizeRegVal = (pAddrDecRegs->sizeReg & CTRL_DEC_SIZE_MASK) >> + CTRL_DEC_SIZE_OFFS; + + pAddrDecWin->size = ctrlRegToSize(sizeRegVal, CTRL_DEC_SIZE_ALIGNMENT); + + + /* Extract base address */ + /* Base register [31:16] ==> baseLow[31:16] */ + pAddrDecWin->baseLow = pAddrDecRegs->baseReg & CTRL_DEC_BASE_MASK; + + pAddrDecWin->baseHigh = 0; + + return MV_OK; + +} + +/******************************************************************************* +* mvCtrlAttribGet - +* +* DESCRIPTION: +* +* INPUT: +* +* OUTPUT: +* +* RETURN: +* +*******************************************************************************/ + +MV_STATUS mvCtrlAttribGet(MV_TARGET target, + MV_TARGET_ATTRIB *targetAttrib) +{ + + targetAttrib->attrib = mvTargetDefaultsArray[MV_CHANGE_BOOT_CS(target)].attrib; + targetAttrib->targetId = mvTargetDefaultsArray[MV_CHANGE_BOOT_CS(target)].targetId; + + return MV_OK; + +} + +/******************************************************************************* +* mvCtrlGetAttrib - +* +* DESCRIPTION: +* +* INPUT: +* +* OUTPUT: +* +* RETURN: +* +*******************************************************************************/ +MV_TARGET mvCtrlTargetGet(MV_TARGET_ATTRIB *targetAttrib) +{ + MV_TARGET target; + MV_TARGET x; + for (target = SDRAM_CS0; target < MAX_TARGETS ; target ++) + { + x = MV_CHANGE_BOOT_CS(target); + if ((mvTargetDefaultsArray[x].attrib == targetAttrib->attrib) && + (mvTargetDefaultsArray[MV_CHANGE_BOOT_CS(target)].targetId == targetAttrib->targetId)) + { + /* found it */ + break; + } + } + + return target; +} + +MV_STATUS mvCtrlAddrDecToParams(MV_DEC_WIN *pAddrDecWin, + MV_DEC_WIN_PARAMS *pWinParam) +{ + MV_U32 baseToReg=0, sizeToReg=0; + + /* BaseLow[31:16] => base register [31:16] */ + baseToReg = pAddrDecWin->addrWin.baseLow & CTRL_DEC_BASE_MASK; + + /* Write to address decode Base Address Register */ + pWinParam->baseAddr &= ~CTRL_DEC_BASE_MASK; + pWinParam->baseAddr |= baseToReg; + + /* Get size register value according to window size */ + sizeToReg = ctrlSizeToReg(pAddrDecWin->addrWin.size, CTRL_DEC_SIZE_ALIGNMENT); + + /* Size parameter validity check. */ + if (-1 == sizeToReg) + { + mvOsPrintf("mvCtrlAddrDecToParams: ERR. ctrlSizeToReg failed.\n"); + return MV_BAD_PARAM; + } + pWinParam->size = sizeToReg; + + pWinParam->attrib = mvTargetDefaultsArray[MV_CHANGE_BOOT_CS(pAddrDecWin->target)].attrib; + pWinParam->targetId = mvTargetDefaultsArray[MV_CHANGE_BOOT_CS(pAddrDecWin->target)].targetId; + + return MV_OK; +} + +MV_STATUS mvCtrlParamsToAddrDec(MV_DEC_WIN_PARAMS *pWinParam, + MV_DEC_WIN *pAddrDecWin) +{ + MV_TARGET_ATTRIB targetAttrib; + + pAddrDecWin->addrWin.baseLow = pWinParam->baseAddr; + + /* Upper 32bit address base is supported under PCI High Address remap */ + pAddrDecWin->addrWin.baseHigh = 0; + + /* Prepare sizeReg to ctrlRegToSize function */ + pAddrDecWin->addrWin.size = ctrlRegToSize(pWinParam->size, CTRL_DEC_SIZE_ALIGNMENT); + + if (-1 == pAddrDecWin->addrWin.size) + { + DB(mvOsPrintf("mvCtrlParamsToAddrDec: ERR. ctrlRegToSize failed.\n")); + return MV_BAD_PARAM; + } + targetAttrib.targetId = pWinParam->targetId; + targetAttrib.attrib = pWinParam->attrib; + + pAddrDecWin->target = mvCtrlTargetGet(&targetAttrib); + + return MV_OK; +} + + + diff --git a/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/kw_family/ctrlEnv/mvCtrlEnvAddrDec.h b/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/kw_family/ctrlEnv/mvCtrlEnvAddrDec.h new file mode 100644 index 0000000000..30efe98ce9 --- /dev/null +++ b/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/kw_family/ctrlEnv/mvCtrlEnvAddrDec.h @@ -0,0 +1,203 @@ +/******************************************************************************* +Copyright (C) Marvell International Ltd. and its affiliates + +This software file (the "File") is owned and distributed by Marvell +International Ltd. and/or its affiliates ("Marvell") under the following +alternative licensing terms. Once you have made an election to distribute the +File under one of the following license alternatives, please (i) delete this +introductory statement regarding license alternatives, (ii) delete the two +license alternatives that you have not elected to use and (iii) preserve the +Marvell copyright notice above. + +******************************************************************************** +Marvell Commercial License Option + +If you received this File from Marvell and you have entered into a commercial +license agreement (a "Commercial License") with Marvell, the File is licensed +to you under the terms of the applicable Commercial License. + +******************************************************************************** +Marvell GPL License Option + +If you received this File from Marvell, you may opt to use, redistribute and/or +modify this File in accordance with the terms and conditions of the General +Public License Version 2, June 1991 (the "GPL License"), a copy of which is +available along with the File in the license.txt file or by writing to the Free +Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or +on the worldwide web at http://www.gnu.org/licenses/gpl.txt. + +THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED +WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY +DISCLAIMED. The GPL License provides additional details about this warranty +disclaimer. +******************************************************************************** +Marvell BSD License Option + +If you received this File from Marvell, you may opt to use, redistribute and/or +modify this File under the following licensing terms. +Redistribution and use in source and binary forms, with or without modification, +are permitted provided that the following conditions are met: + + * Redistributions of source code must retain the above copyright notice, + this list of conditions and the following disclaimer. + + * Redistributions in binary form must reproduce the above copyright + notice, this list of conditions and the following disclaimer in the + documentation and/or other materials provided with the distribution. + + * Neither the name of Marvell nor the names of its contributors may be + used to endorse or promote products derived from this software without + specific prior written permission. + +THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND +ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED +WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE +DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR +ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES +(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; +LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON +ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS +SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + +*******************************************************************************/ + + +#ifndef __INCmvCtrlEnvAddrDech +#define __INCmvCtrlEnvAddrDech + +/* includes */ +#include "ctrlEnv/mvCtrlEnvLib.h" +#include "ctrlEnv/mvCtrlEnvRegs.h" + + +/* defines */ +/* DUnit attributes */ +#define ATMWCR_WIN_DUNIT_CS0_OFFS 0 +#define ATMWCR_WIN_DUNIT_CS0_MASK BIT0 +#define ATMWCR_WIN_DUNIT_CS0_REQ (0 << ATMWCR_WIN_DUNIT_CS0_OFFS) + +#define ATMWCR_WIN_DUNIT_CS1_OFFS 1 +#define ATMWCR_WIN_DUNIT_CS1_MASK BIT1 +#define ATMWCR_WIN_DUNIT_CS1_REQ (0 << ATMWCR_WIN_DUNIT_CS1_OFFS) + +#define ATMWCR_WIN_DUNIT_CS2_OFFS 2 +#define ATMWCR_WIN_DUNIT_CS2_MASK BIT2 +#define ATMWCR_WIN_DUNIT_CS2_REQ (0 << ATMWCR_WIN_DUNIT_CS2_OFFS) + +#define ATMWCR_WIN_DUNIT_CS3_OFFS 3 +#define ATMWCR_WIN_DUNIT_CS3_MASK BIT3 +#define ATMWCR_WIN_DUNIT_CS3_REQ (0 << ATMWCR_WIN_DUNIT_CS3_OFFS) + +/* RUnit (Device) attributes */ +#define ATMWCR_WIN_RUNIT_DEVCS0_OFFS 0 +#define ATMWCR_WIN_RUNIT_DEVCS0_MASK BIT0 +#define ATMWCR_WIN_RUNIT_DEVCS0_REQ (0 << ATMWCR_WIN_RUNIT_DEVCS0_OFFS) + +#define ATMWCR_WIN_RUNIT_DEVCS1_OFFS 1 +#define ATMWCR_WIN_RUNIT_DEVCS1_MASK BIT1 +#define ATMWCR_WIN_RUNIT_DEVCS1_REQ (0 << ATMWCR_WIN_RUNIT_DEVCS1_OFFS) + +#define ATMWCR_WIN_RUNIT_DEVCS2_OFFS 2 +#define ATMWCR_WIN_RUNIT_DEVCS2_MASK BIT2 +#define ATMWCR_WIN_RUNIT_DEVCS2_REQ (0 << ATMWCR_WIN_RUNIT_DEVCS2_OFFS) + +#define ATMWCR_WIN_RUNIT_BOOTCS_OFFS 4 +#define ATMWCR_WIN_RUNIT_BOOTCS_MASK BIT4 +#define ATMWCR_WIN_RUNIT_BOOTCS_REQ (0 << ATMWCR_WIN_RUNIT_BOOTCS_OFFS) + +/* LMaster (PCI) attributes */ +#define ATMWCR_WIN_LUNIT_BYTE_SWP_OFFS 0 +#define ATMWCR_WIN_LUNIT_BYTE_SWP_MASK BIT0 +#define ATMWCR_WIN_LUNIT_BYTE_SWP (0 << ATMWCR_WIN_LUNIT_BYTE_SWP_OFFS) +#define ATMWCR_WIN_LUNIT_BYTE_NO_SWP (1 << ATMWCR_WIN_LUNIT_BYTE_SWP_OFFS) + + +#define ATMWCR_WIN_LUNIT_WORD_SWP_OFFS 1 +#define ATMWCR_WIN_LUNIT_WORD_SWP_MASK BIT1 +#define ATMWCR_WIN_LUNIT_WORD_SWP (0 << ATMWCR_WIN_LUNIT_WORD_SWP_OFFS) +#define ATMWCR_WIN_LUNIT_WORD_NO_SWP (1 << ATMWCR_WIN_LUNIT_WORD_SWP_OFFS) + +#define ATMWCR_WIN_LUNIT_NO_SNOOP BIT2 + +#define ATMWCR_WIN_LUNIT_TYPE_OFFS 3 +#define ATMWCR_WIN_LUNIT_TYPE_MASK BIT3 +#define ATMWCR_WIN_LUNIT_TYPE_IO (0 << ATMWCR_WIN_LUNIT_TYPE_OFFS) +#define ATMWCR_WIN_LUNIT_TYPE_MEM (1 << ATMWCR_WIN_LUNIT_TYPE_OFFS) + +#define ATMWCR_WIN_LUNIT_FORCE64_OFFS 4 +#define ATMWCR_WIN_LUNIT_FORCE64_MASK BIT4 +#define ATMWCR_WIN_LUNIT_FORCE64 (0 << ATMWCR_WIN_LUNIT_FORCE64_OFFS) + +#define ATMWCR_WIN_LUNIT_ORDERING_OFFS 6 +#define ATMWCR_WIN_LUNIT_ORDERING_MASK BIT6 +#define ATMWCR_WIN_LUNIT_ORDERING (1 << ATMWCR_WIN_LUNIT_FORCE64_OFFS) + +/* PEX Attributes */ +#define ATMWCR_WIN_PEX_TYPE_OFFS 3 +#define ATMWCR_WIN_PEX_TYPE_MASK BIT3 +#define ATMWCR_WIN_PEX_TYPE_IO (0 << ATMWCR_WIN_PEX_TYPE_OFFS) +#define ATMWCR_WIN_PEX_TYPE_MEM (1 << ATMWCR_WIN_PEX_TYPE_OFFS) + +/* typedefs */ + +/* Unsupported attributes for address decode: */ +/* 2) PCI0/1_REQ64n control */ + +typedef struct _mvDecRegs +{ + MV_U32 baseReg; + MV_U32 baseRegHigh; + MV_U32 sizeReg; + +}MV_DEC_REGS; + +typedef struct _mvTargetAttrib +{ + MV_U8 attrib; /* chip select attributes */ + MV_TARGET_ID targetId; /* Target Id of this MV_TARGET */ + +}MV_TARGET_ATTRIB; + + +/* This structure describes address decode window */ +typedef struct _mvDecWin +{ + MV_TARGET target; /* Target for addr decode window */ + MV_ADDR_WIN addrWin; /* Address window of target */ + MV_BOOL enable; /* Window enable/disable */ +}MV_DEC_WIN; + +typedef struct _mvDecWinParams +{ + MV_TARGET_ID targetId; /* Target ID field */ + MV_U8 attrib; /* Attribute field */ + MV_U32 baseAddr; /* Base address in register format */ + MV_U32 size; /* Size in register format */ +}MV_DEC_WIN_PARAMS; + + +/* mvCtrlEnvAddrDec API list */ + +MV_STATUS mvCtrlAddrDecToReg(MV_ADDR_WIN *pAddrDecWin, + MV_DEC_REGS *pAddrDecRegs); + +MV_STATUS mvCtrlRegToAddrDec(MV_DEC_REGS *pAddrDecRegs, + MV_ADDR_WIN *pAddrDecWin); + +MV_STATUS mvCtrlAttribGet(MV_TARGET target, + MV_TARGET_ATTRIB *targetAttrib); + +MV_TARGET mvCtrlTargetGet(MV_TARGET_ATTRIB *targetAttrib); + + +MV_STATUS mvCtrlAddrDecToParams(MV_DEC_WIN *pAddrDecWin, + MV_DEC_WIN_PARAMS *pWinParam); + +MV_STATUS mvCtrlParamsToAddrDec(MV_DEC_WIN_PARAMS *pWinParam, + MV_DEC_WIN *pAddrDecWin); + + + + +#endif /* __INCmvCtrlEnvAddrDech */ diff --git a/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/kw_family/ctrlEnv/mvCtrlEnvAsm.h b/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/kw_family/ctrlEnv/mvCtrlEnvAsm.h new file mode 100644 index 0000000000..6f6367a2fb --- /dev/null +++ b/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/kw_family/ctrlEnv/mvCtrlEnvAsm.h @@ -0,0 +1,98 @@ +/******************************************************************************* +Copyright (C) Marvell International Ltd. and its affiliates + +This software file (the "File") is owned and distributed by Marvell +International Ltd. and/or its affiliates ("Marvell") under the following +alternative licensing terms. Once you have made an election to distribute the +File under one of the following license alternatives, please (i) delete this +introductory statement regarding license alternatives, (ii) delete the two +license alternatives that you have not elected to use and (iii) preserve the +Marvell copyright notice above. + +******************************************************************************** +Marvell Commercial License Option + +If you received this File from Marvell and you have entered into a commercial +license agreement (a "Commercial License") with Marvell, the File is licensed +to you under the terms of the applicable Commercial License. + +******************************************************************************** +Marvell GPL License Option + +If you received this File from Marvell, you may opt to use, redistribute and/or +modify this File in accordance with the terms and conditions of the General +Public License Version 2, June 1991 (the "GPL License"), a copy of which is +available along with the File in the license.txt file or by writing to the Free +Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or +on the worldwide web at http://www.gnu.org/licenses/gpl.txt. + +THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED +WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY +DISCLAIMED. The GPL License provides additional details about this warranty +disclaimer. +******************************************************************************** +Marvell BSD License Option + +If you received this File from Marvell, you may opt to use, redistribute and/or +modify this File under the following licensing terms. +Redistribution and use in source and binary forms, with or without modification, +are permitted provided that the following conditions are met: + + * Redistributions of source code must retain the above copyright notice, + this list of conditions and the following disclaimer. + + * Redistributions in binary form must reproduce the above copyright + notice, this list of conditions and the following disclaimer in the + documentation and/or other materials provided with the distribution. + + * Neither the name of Marvell nor the names of its contributors may be + used to endorse or promote products derived from this software without + specific prior written permission. + +THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND +ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED +WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE +DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR +ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES +(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; +LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON +ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS +SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + +*******************************************************************************/ + + +#ifndef __INCmvCtrlEnvAsmh +#define __INCmvCtrlEnvAsmh +#include "pex/mvPexRegs.h" + +#define CHIP_BOND_REG 0x10034 +#define PCKG_OPT_MASK_AS #3 +#define PXCCARI_REVID_MASK_AS #PXCCARI_REVID_MASK + +/* Read device ID into toReg bits 15:0 from 0xd0000000 */ +/* defines */ +#define MV_DV_CTRL_MODEL_GET_ASM(toReg, tmpReg) \ + MV_DV_REG_READ_ASM(toReg, tmpReg, CHIP_BOND_REG);\ + and toReg, toReg, PCKG_OPT_MASK_AS /* Mask for package ID */ + +/* Read device ID into toReg bits 15:0 from 0xf1000000*/ +#define MV_CTRL_MODEL_GET_ASM(toReg, tmpReg) \ + MV_REG_READ_ASM(toReg, tmpReg, CHIP_BOND_REG);\ + and toReg, toReg, PCKG_OPT_MASK_AS /* Mask for package ID */ + +/* Read Revision into toReg bits 7:0 0xd0000000*/ +#define MV_DV_CTRL_REV_GET_ASM(toReg, tmpReg) \ + /* Read device revision */ \ + MV_DV_REG_READ_ASM(toReg, tmpReg, PEX_CFG_DIRECT_ACCESS(0,PEX_CLASS_CODE_AND_REVISION_ID));\ + and toReg, toReg, PXCCARI_REVID_MASK_AS /* Mask for calss ID */ + +/* Read Revision into toReg bits 7:0 0xf1000000*/ +#define MV_CTRL_REV_GET_ASM(toReg, tmpReg) \ + /* Read device revision */ \ + MV_REG_READ_ASM(toReg, tmpReg, PEX_CFG_DIRECT_ACCESS(0,PEX_CLASS_CODE_AND_REVISION_ID));\ + and toReg, toReg, PXCCARI_REVID_MASK_AS /* Mask for calss ID */ + + +#endif /* __INCmvCtrlEnvAsmh */ diff --git a/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/kw_family/ctrlEnv/mvCtrlEnvLib.c b/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/kw_family/ctrlEnv/mvCtrlEnvLib.c new file mode 100644 index 0000000000..adf451d3e0 --- /dev/null +++ b/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/kw_family/ctrlEnv/mvCtrlEnvLib.c @@ -0,0 +1,1825 @@ +/******************************************************************************* +Copyright (C) Marvell International Ltd. and its affiliates + +This software file (the "File") is owned and distributed by Marvell +International Ltd. and/or its affiliates ("Marvell") under the following +alternative licensing terms. Once you have made an election to distribute the +File under one of the following license alternatives, please (i) delete this +introductory statement regarding license alternatives, (ii) delete the two +license alternatives that you have not elected to use and (iii) preserve the +Marvell copyright notice above. + +******************************************************************************** +Marvell Commercial License Option + +If you received this File from Marvell and you have entered into a commercial +license agreement (a "Commercial License") with Marvell, the File is licensed +to you under the terms of the applicable Commercial License. + +******************************************************************************** +Marvell GPL License Option + +If you received this File from Marvell, you may opt to use, redistribute and/or +modify this File in accordance with the terms and conditions of the General +Public License Version 2, June 1991 (the "GPL License"), a copy of which is +available along with the File in the license.txt file or by writing to the Free +Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or +on the worldwide web at http://www.gnu.org/licenses/gpl.txt. + +THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED +WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY +DISCLAIMED. The GPL License provides additional details about this warranty +disclaimer. +******************************************************************************** +Marvell BSD License Option + +If you received this File from Marvell, you may opt to use, redistribute and/or +modify this File under the following licensing terms. +Redistribution and use in source and binary forms, with or without modification, +are permitted provided that the following conditions are met: + + * Redistributions of source code must retain the above copyright notice, + this list of conditions and the following disclaimer. + + * Redistributions in binary form must reproduce the above copyright + notice, this list of conditions and the following disclaimer in the + documentation and/or other materials provided with the distribution. + + * Neither the name of Marvell nor the names of its contributors may be + used to endorse or promote products derived from this software without + specific prior written permission. + +THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND +ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED +WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE +DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR +ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES +(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; +LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON +ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS +SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + +*******************************************************************************/ + + +/* includes */ +#include "mvCommon.h" +#include "mvCtrlEnvLib.h" +#include "ctrlEnv/sys/mvCpuIf.h" + +#if defined(MV_INCLUDE_PEX) +#include "pex/mvPex.h" +#include "ctrlEnv/sys/mvSysPex.h" +#endif + +#if defined(MV_INCLUDE_GIG_ETH) +#include "ctrlEnv/sys/mvSysGbe.h" +#endif + +#if defined(MV_INCLUDE_XOR) +#include "ctrlEnv/sys/mvSysXor.h" +#endif + +#if defined(MV_INCLUDE_SATA) +#include "ctrlEnv/sys/mvSysSata.h" +#endif + +#if defined(MV_INCLUDE_USB) +#include "ctrlEnv/sys/mvSysUsb.h" +#endif + +#if defined(MV_INCLUDE_AUDIO) +#include "ctrlEnv/sys/mvSysAudio.h" +#endif + +#if defined(MV_INCLUDE_CESA) +#include "ctrlEnv/sys/mvSysCesa.h" +#endif + +#if defined(MV_INCLUDE_TS) +#include "ctrlEnv/sys/mvSysTs.h" +#endif + +/* defines */ +#ifdef MV_DEBUG + #define DB(x) x +#else + #define DB(x) +#endif + +/******************************************************************************* +* mvCtrlEnvInit - Initialize Marvell controller environment. +* +* DESCRIPTION: +* This function get environment information and initialize controller +* internal/external environment. For example +* 1) MPP settings according to board MPP macros. +* NOTE: It is the user responsibility to shut down all DMA channels +* in device and disable controller sub units interrupts during +* boot process. +* +* INPUT: +* None. +* +* OUTPUT: +* None. +* +* RETURN: +* None. +* +*******************************************************************************/ +MV_STATUS mvCtrlEnvInit(MV_VOID) +{ + MV_U32 mppGroup; + MV_U32 devId; + MV_U32 boardId; + MV_U32 i; + MV_U32 maxMppGrp = 1; + MV_U32 mppVal = 0; + MV_U32 bootVal = 0; + MV_U32 mppGroupType = 0; + MV_U32 mppGroup1[][3] = MPP_GROUP_1_TYPE; + MV_U32 mppGroup2[][3] = MPP_GROUP_2_TYPE; + + devId = mvCtrlModelGet(); + boardId= mvBoardIdGet(); + + switch(devId){ + case MV_6281_DEV_ID: + maxMppGrp = MV_6281_MPP_MAX_GROUP; + break; + case MV_6192_DEV_ID: + maxMppGrp = MV_6192_MPP_MAX_GROUP; + break; + case MV_6190_DEV_ID: + maxMppGrp = MV_6190_MPP_MAX_GROUP; + break; + case MV_6180_DEV_ID: + maxMppGrp = MV_6180_MPP_MAX_GROUP; + break; + } + + /* MPP Init */ + /* We split mpp init to 3 phases: + * 1. We init mpp[19:0] from the board info. mpp[23:20] will be over write + * in phase 2. + * 2. We detect the mpp group type and according the mpp values [35:20]. + * 3. We detect the mpp group type and according the mpp values [49:36]. + */ + /* Mpp phase 1 mpp[19:0] */ + /* Read MPP group from board level and assign to MPP register */ + for (mppGroup = 0; mppGroup < 3; mppGroup++) + { + mppVal = mvBoardMppGet(mppGroup); + if (mppGroup == 0) + { + bootVal = MV_REG_READ(mvCtrlMppRegGet(mppGroup)); + if (mvCtrlIsBootFromSPI()) + { + mppVal &= ~0xffff; + bootVal &= 0xffff; + mppVal |= bootVal; + } + else if (mvCtrlIsBootFromSPIUseNAND()) + { + mppVal &= ~0xf0000000; + bootVal &= 0xf0000000; + mppVal |= bootVal; + } + else if (mvCtrlIsBootFromNAND()) + { + mppVal &= ~0xffffff; + bootVal &= 0xffffff; + mppVal |= bootVal; + } + } + + if (mppGroup == 2) + { + bootVal = MV_REG_READ(mvCtrlMppRegGet(mppGroup)); + if (mvCtrlIsBootFromNAND()) + { + mppVal &= ~0xff00; + bootVal &= 0xff00; + mppVal |= bootVal; + } + } + + MV_REG_WRITE(mvCtrlMppRegGet(mppGroup), mppVal); + } + + /* Identify MPPs group */ + mvBoardMppGroupIdUpdate(); + + /* Update MPPs mux relevent only on Marvell DB */ + if ((boardId == DB_88F6281A_BP_ID) || + (boardId == DB_88F6180A_BP_ID)) + mvBoardMppMuxSet(); + + mppGroupType = mvBoardMppGroupTypeGet(MV_BOARD_MPP_GROUP_1); + + /* Mpp phase 2 */ + /* Read MPP group from board level and assign to MPP register */ + if (devId != MV_6180_DEV_ID) + { + i = 0; + for (mppGroup = 2; mppGroup < 5; mppGroup++) + { + if ((mppGroupType == MV_BOARD_OTHER) || + (boardId == RD_88F6281A_ID) || + (boardId == RD_88F6192A_ID) || + (boardId == RD_88F6190A_ID) || + (boardId == RD_88F6281A_PCAC_ID) || + (boardId == SHEEVA_PLUG_ID)) + mppVal = mvBoardMppGet(mppGroup); + else + { + mppVal = mppGroup1[mppGroupType][i]; + i++; + } + + /* Group 2 is shared mpp[23:16] */ + if (mppGroup == 2) + { + bootVal = MV_REG_READ(mvCtrlMppRegGet(mppGroup)); + mppVal &= ~0xffff; + bootVal &= 0xffff; + mppVal |= bootVal; + } + + MV_REG_WRITE(mvCtrlMppRegGet(mppGroup), mppVal); + } + } + + if ((devId == MV_6192_DEV_ID) || (devId == MV_6190_DEV_ID)) + return MV_OK; + + /* Mpp phase 3 */ + mppGroupType = mvBoardMppGroupTypeGet(MV_BOARD_MPP_GROUP_2); + /* Read MPP group from board level and assign to MPP register */ + i = 0; + for (mppGroup = 4; mppGroup < 7; mppGroup++) + { + if ((mppGroupType == MV_BOARD_OTHER) || + (boardId == RD_88F6281A_ID) || + (boardId == RD_88F6281A_PCAC_ID) || + (boardId == SHEEVA_PLUG_ID)) + mppVal = mvBoardMppGet(mppGroup); + else + { + mppVal = mppGroup2[mppGroupType][i]; + i++; + } + + /* Group 4 is shared mpp[35:32] */ + if (mppGroup == 4) + { + bootVal = MV_REG_READ(mvCtrlMppRegGet(mppGroup)); + mppVal &= ~0xffff; + bootVal &= 0xffff; + mppVal |= bootVal; + } + + MV_REG_WRITE(mvCtrlMppRegGet(mppGroup), mppVal); + } + /* Update SSCG configuration register*/ + if(mvBoardIdGet() == DB_88F6281A_BP_ID || mvBoardIdGet() == DB_88F6192A_BP_ID || + mvBoardIdGet() == DB_88F6190A_BP_ID || mvBoardIdGet() == DB_88F6180A_BP_ID) + MV_REG_WRITE(0x100d8, 0x53); + + return MV_OK; +} + +/******************************************************************************* +* mvCtrlMppRegGet - return reg address of mpp group +* +* DESCRIPTION: +* +* INPUT: +* mppGroup - MPP group. +* +* OUTPUT: +* None. +* +* RETURN: +* MV_U32 - Register address. +* +*******************************************************************************/ +MV_U32 mvCtrlMppRegGet(MV_U32 mppGroup) +{ + MV_U32 ret; + + switch(mppGroup){ + case (0): ret = MPP_CONTROL_REG0; + break; + case (1): ret = MPP_CONTROL_REG1; + break; + case (2): ret = MPP_CONTROL_REG2; + break; + case (3): ret = MPP_CONTROL_REG3; + break; + case (4): ret = MPP_CONTROL_REG4; + break; + case (5): ret = MPP_CONTROL_REG5; + break; + case (6): ret = MPP_CONTROL_REG6; + break; + default: ret = MPP_CONTROL_REG0; + break; + } + return ret; +} +#if defined(MV_INCLUDE_PEX) +/******************************************************************************* +* mvCtrlPexMaxIfGet - Get Marvell controller number of PEX interfaces. +* +* DESCRIPTION: +* This function returns Marvell controller number of PEX interfaces. +* +* INPUT: +* None. +* +* OUTPUT: +* None. +* +* RETURN: +* Marvell controller number of PEX interfaces. If controller +* ID is undefined the function returns '0'. +* +*******************************************************************************/ +MV_U32 mvCtrlPexMaxIfGet(MV_VOID) +{ + + return MV_PEX_MAX_IF; +} +#endif + +#if defined(MV_INCLUDE_GIG_ETH) +/******************************************************************************* +* mvCtrlEthMaxPortGet - Get Marvell controller number of etherent ports. +* +* DESCRIPTION: +* This function returns Marvell controller number of etherent port. +* +* INPUT: +* None. +* +* OUTPUT: +* None. +* +* RETURN: +* Marvell controller number of etherent port. +* +*******************************************************************************/ +MV_U32 mvCtrlEthMaxPortGet(MV_VOID) +{ + MV_U32 devId; + + devId = mvCtrlModelGet(); + + switch(devId){ + case MV_6281_DEV_ID: + return MV_6281_ETH_MAX_PORTS; + break; + case MV_6192_DEV_ID: + return MV_6192_ETH_MAX_PORTS; + break; + case MV_6190_DEV_ID: + return MV_6190_ETH_MAX_PORTS; + break; + case MV_6180_DEV_ID: + return MV_6180_ETH_MAX_PORTS; + break; + } + return 0; + +} +#endif + +#if defined(MV_INCLUDE_XOR) +/******************************************************************************* +* mvCtrlXorMaxChanGet - Get Marvell controller number of XOR channels. +* +* DESCRIPTION: +* This function returns Marvell controller number of XOR channels. +* +* INPUT: +* None. +* +* OUTPUT: +* None. +* +* RETURN: +* Marvell controller number of XOR channels. +* +*******************************************************************************/ +MV_U32 mvCtrlXorMaxChanGet(MV_VOID) +{ + return MV_XOR_MAX_CHAN; +} +#endif + +#if defined(MV_INCLUDE_USB) +/******************************************************************************* +* mvCtrlUsbHostMaxGet - Get number of Marvell Usb controllers +* +* DESCRIPTION: +* +* INPUT: +* None. +* +* OUTPUT: +* None. +* +* RETURN: +* returns number of Marvell USB controllers. +* +*******************************************************************************/ +MV_U32 mvCtrlUsbMaxGet(void) +{ + return MV_USB_MAX_PORTS; +} +#endif + + +#if defined(MV_INCLUDE_NAND) +/******************************************************************************* +* mvCtrlNandSupport - Return if this controller has integrated NAND flash support +* +* DESCRIPTION: +* +* INPUT: +* None. +* +* OUTPUT: +* None. +* +* RETURN: +* MV_TRUE if NAND is supported and MV_FALSE otherwise +* +*******************************************************************************/ +MV_U32 mvCtrlNandSupport(MV_VOID) +{ + MV_U32 devId; + + devId = mvCtrlModelGet(); + + switch(devId){ + case MV_6281_DEV_ID: + return MV_6281_NAND; + break; + case MV_6192_DEV_ID: + return MV_6192_NAND; + break; + case MV_6190_DEV_ID: + return MV_6190_NAND; + break; + case MV_6180_DEV_ID: + return MV_6180_NAND; + break; + } + return 0; + +} +#endif + +#if defined(MV_INCLUDE_SDIO) +/******************************************************************************* +* mvCtrlSdioSupport - Return if this controller has integrated SDIO flash support +* +* DESCRIPTION: +* +* INPUT: +* None. +* +* OUTPUT: +* None. +* +* RETURN: +* MV_TRUE if SDIO is supported and MV_FALSE otherwise +* +*******************************************************************************/ +MV_U32 mvCtrlSdioSupport(MV_VOID) +{ + MV_U32 devId; + + devId = mvCtrlModelGet(); + + switch(devId){ + case MV_6281_DEV_ID: + return MV_6281_SDIO; + break; + case MV_6192_DEV_ID: + return MV_6192_SDIO; + break; + case MV_6190_DEV_ID: + return MV_6190_SDIO; + break; + case MV_6180_DEV_ID: + return MV_6180_SDIO; + break; + } + return 0; + +} +#endif + +#if defined(MV_INCLUDE_TS) +/******************************************************************************* +* mvCtrlTsSupport - Return if this controller has integrated TS flash support +* +* DESCRIPTION: +* +* INPUT: +* None. +* +* OUTPUT: +* None. +* +* RETURN: +* MV_TRUE if TS is supported and MV_FALSE otherwise +* +*******************************************************************************/ +MV_U32 mvCtrlTsSupport(MV_VOID) +{ + MV_U32 devId; + + devId = mvCtrlModelGet(); + + switch(devId){ + case MV_6281_DEV_ID: + return MV_6281_TS; + break; + case MV_6192_DEV_ID: + return MV_6192_TS; + break; + case MV_6190_DEV_ID: + return MV_6190_TS; + break; + case MV_6180_DEV_ID: + return MV_6180_TS; + break; + } + return 0; +} +#endif + +#if defined(MV_INCLUDE_AUDIO) +/******************************************************************************* +* mvCtrlAudioSupport - Return if this controller has integrated AUDIO flash support +* +* DESCRIPTION: +* +* INPUT: +* None. +* +* OUTPUT: +* None. +* +* RETURN: +* MV_TRUE if AUDIO is supported and MV_FALSE otherwise +* +*******************************************************************************/ +MV_U32 mvCtrlAudioSupport(MV_VOID) +{ + MV_U32 devId; + + devId = mvCtrlModelGet(); + + switch(devId){ + case MV_6281_DEV_ID: + return MV_6281_AUDIO; + break; + case MV_6192_DEV_ID: + return MV_6192_AUDIO; + break; + case MV_6190_DEV_ID: + return MV_6190_AUDIO; + break; + case MV_6180_DEV_ID: + return MV_6180_AUDIO; + break; + } + return 0; + +} +#endif + +#if defined(MV_INCLUDE_TDM) +/******************************************************************************* +* mvCtrlTdmSupport - Return if this controller has integrated TDM flash support +* +* DESCRIPTION: +* +* INPUT: +* None. +* +* OUTPUT: +* None. +* +* RETURN: +* MV_TRUE if TDM is supported and MV_FALSE otherwise +* +*******************************************************************************/ +MV_U32 mvCtrlTdmSupport(MV_VOID) +{ + MV_U32 devId; + + devId = mvCtrlModelGet(); + + switch(devId){ + case MV_6281_DEV_ID: + return MV_6281_TDM; + break; + case MV_6192_DEV_ID: + return MV_6192_TDM; + break; + case MV_6190_DEV_ID: + return MV_6190_TDM; + break; + case MV_6180_DEV_ID: + return MV_6180_TDM; + break; + } + return 0; + +} +#endif + +/******************************************************************************* +* mvCtrlModelGet - Get Marvell controller device model (Id) +* +* DESCRIPTION: +* This function returns 16bit describing the device model (ID) as defined +* in PCI Device and Vendor ID configuration register offset 0x0. +* +* INPUT: +* None. +* +* OUTPUT: +* None. +* +* RETURN: +* 16bit desscribing Marvell controller ID +* +*******************************************************************************/ +MV_U16 mvCtrlModelGet(MV_VOID) +{ + MV_U32 devId; + + devId = MV_REG_READ(CHIP_BOND_REG); + devId &= PCKG_OPT_MASK; + + switch(devId){ + case 2: + return MV_6281_DEV_ID; + break; + case 1: + if (((MV_REG_READ(PEX_CFG_DIRECT_ACCESS(0,PEX_DEVICE_AND_VENDOR_ID))& 0xffff0000) >> 16) + == MV_6190_DEV_ID) + return MV_6190_DEV_ID; + else + return MV_6192_DEV_ID; + break; + case 0: + return MV_6180_DEV_ID; + break; + } + + return 0; +} +/******************************************************************************* +* mvCtrlRevGet - Get Marvell controller device revision number +* +* DESCRIPTION: +* This function returns 8bit describing the device revision as defined +* in PCI Express Class Code and Revision ID Register. +* +* INPUT: +* None. +* +* OUTPUT: +* None. +* +* RETURN: +* 8bit desscribing Marvell controller revision number +* +*******************************************************************************/ +MV_U8 mvCtrlRevGet(MV_VOID) +{ + MV_U8 revNum; +#if defined(MV_INCLUDE_CLK_PWR_CNTRL) + /* Check pex power state */ + MV_U32 pexPower; + pexPower = mvCtrlPwrClckGet(PEX_UNIT_ID,0); + if (pexPower == MV_FALSE) + mvCtrlPwrClckSet(PEX_UNIT_ID, 0, MV_TRUE); +#endif + revNum = (MV_U8)MV_REG_READ(PEX_CFG_DIRECT_ACCESS(0,PCI_CLASS_CODE_AND_REVISION_ID)); +#if defined(MV_INCLUDE_CLK_PWR_CNTRL) + /* Return to power off state */ + if (pexPower == MV_FALSE) + mvCtrlPwrClckSet(PEX_UNIT_ID, 0, MV_FALSE); +#endif + return ((revNum & PCCRIR_REVID_MASK) >> PCCRIR_REVID_OFFS); +} + +/******************************************************************************* +* mvCtrlNameGet - Get Marvell controller name +* +* DESCRIPTION: +* This function returns a string describing the device model and revision. +* +* INPUT: +* None. +* +* OUTPUT: +* pNameBuff - Buffer to contain device name string. Minimum size 30 chars. +* +* RETURN: +* +* MV_ERROR if informantion can not be read. +*******************************************************************************/ +MV_STATUS mvCtrlNameGet(char *pNameBuff) +{ + mvOsSPrintf (pNameBuff, "%s%x Rev %d", SOC_NAME_PREFIX, + mvCtrlModelGet(), mvCtrlRevGet()); + + return MV_OK; +} + +/******************************************************************************* +* mvCtrlModelRevGet - Get Controller Model (Device ID) and Revision +* +* DESCRIPTION: +* This function returns 32bit value describing both Device ID and Revision +* as defined in PCI Express Device and Vendor ID Register and device revision +* as defined in PCI Express Class Code and Revision ID Register. + +* +* INPUT: +* None. +* +* OUTPUT: +* None. +* +* RETURN: +* 32bit describing both controller device ID and revision number +* +*******************************************************************************/ +MV_U32 mvCtrlModelRevGet(MV_VOID) +{ + return ((mvCtrlModelGet() << 16) | mvCtrlRevGet()); +} + +/******************************************************************************* +* mvCtrlModelRevNameGet - Get Marvell controller name +* +* DESCRIPTION: +* This function returns a string describing the device model and revision. +* +* INPUT: +* None. +* +* OUTPUT: +* pNameBuff - Buffer to contain device name string. Minimum size 30 chars. +* +* RETURN: +* +* MV_ERROR if informantion can not be read. +*******************************************************************************/ + +MV_STATUS mvCtrlModelRevNameGet(char *pNameBuff) +{ + + switch (mvCtrlModelRevGet()) + { + case MV_6281_A0_ID: + mvOsSPrintf (pNameBuff, "%s",MV_6281_A0_NAME); + break; + case MV_6192_A0_ID: + mvOsSPrintf (pNameBuff, "%s",MV_6192_A0_NAME); + break; + case MV_6180_A0_ID: + mvOsSPrintf (pNameBuff, "%s",MV_6180_A0_NAME); + break; + case MV_6190_A0_ID: + mvOsSPrintf (pNameBuff, "%s",MV_6190_A0_NAME); + break; + case MV_6281_A1_ID: + mvOsSPrintf (pNameBuff, "%s",MV_6281_A1_NAME); + break; + case MV_6192_A1_ID: + mvOsSPrintf (pNameBuff, "%s",MV_6192_A1_NAME); + break; + case MV_6180_A1_ID: + mvOsSPrintf (pNameBuff, "%s",MV_6180_A1_NAME); + break; + case MV_6190_A1_ID: + mvOsSPrintf (pNameBuff, "%s",MV_6190_A1_NAME); + break; + default: + mvCtrlNameGet(pNameBuff); + break; + } + + return MV_OK; +} + + +/******************************************************************************* +* ctrlWinOverlapTest - Test address windows for overlaping. +* +* DESCRIPTION: +* This function checks the given two address windows for overlaping. +* +* INPUT: +* pAddrWin1 - Address window 1. +* pAddrWin2 - Address window 2. +* +* OUTPUT: +* None. +* +* RETURN: +* +* MV_TRUE if address window overlaps, MV_FALSE otherwise. +*******************************************************************************/ +MV_STATUS ctrlWinOverlapTest(MV_ADDR_WIN *pAddrWin1, MV_ADDR_WIN *pAddrWin2) +{ + MV_U32 winBase1, winBase2; + MV_U32 winTop1, winTop2; + + /* check if we have overflow than 4G*/ + if (((0xffffffff - pAddrWin1->baseLow) < pAddrWin1->size-1)|| + ((0xffffffff - pAddrWin2->baseLow) < pAddrWin2->size-1)) + { + return MV_TRUE; + } + + winBase1 = pAddrWin1->baseLow; + winBase2 = pAddrWin2->baseLow; + winTop1 = winBase1 + pAddrWin1->size-1; + winTop2 = winBase2 + pAddrWin2->size-1; + + + if (((winBase1 <= winTop2 ) && ( winTop2 <= winTop1)) || + ((winBase1 <= winBase2) && (winBase2 <= winTop1))) + { + return MV_TRUE; + } + else + { + return MV_FALSE; + } +} + +/******************************************************************************* +* ctrlWinWithinWinTest - Test address windows for overlaping. +* +* DESCRIPTION: +* This function checks the given win1 boundries is within +* win2 boundries. +* +* INPUT: +* pAddrWin1 - Address window 1. +* pAddrWin2 - Address window 2. +* +* OUTPUT: +* None. +* +* RETURN: +* +* MV_TRUE if found win1 inside win2, MV_FALSE otherwise. +*******************************************************************************/ +MV_STATUS ctrlWinWithinWinTest(MV_ADDR_WIN *pAddrWin1, MV_ADDR_WIN *pAddrWin2) +{ + MV_U32 winBase1, winBase2; + MV_U32 winTop1, winTop2; + + winBase1 = pAddrWin1->baseLow; + winBase2 = pAddrWin2->baseLow; + winTop1 = winBase1 + pAddrWin1->size -1; + winTop2 = winBase2 + pAddrWin2->size -1; + + if (((winBase1 >= winBase2 ) && ( winBase1 <= winTop2)) || + ((winTop1 >= winBase2) && (winTop1 <= winTop2))) + { + return MV_TRUE; + } + else + { + return MV_FALSE; + } +} + +static const char* cntrlName[] = TARGETS_NAME_ARRAY; + +/******************************************************************************* +* mvCtrlTargetNameGet - Get Marvell controller target name +* +* DESCRIPTION: +* This function convert the trget enumeration to string. +* +* INPUT: +* None. +* +* OUTPUT: +* None. +* +* RETURN: +* Target name (const MV_8 *) +*******************************************************************************/ +const MV_8* mvCtrlTargetNameGet( MV_TARGET target ) +{ + + if (target >= MAX_TARGETS) + { + return "target unknown"; + } + + return cntrlName[target]; +} + +/******************************************************************************* +* mvCtrlAddrDecShow - Print the Controller units address decode map. +* +* DESCRIPTION: +* This function the Controller units address decode map. +* +* INPUT: +* None. +* +* OUTPUT: +* None. +* +* RETURN: +* None. +* +*******************************************************************************/ +MV_VOID mvCtrlAddrDecShow(MV_VOID) +{ + mvCpuIfAddDecShow(); + mvAhbToMbusAddDecShow(); +#if defined(MV_INCLUDE_PEX) + mvPexAddrDecShow(); +#endif +#if defined(MV_INCLUDE_USB) + mvUsbAddrDecShow(); +#endif +#if defined(MV_INCLUDE_GIG_ETH) + mvEthAddrDecShow(); +#endif +#if defined(MV_INCLUDE_XOR) + mvXorAddrDecShow(); +#endif +#if defined(MV_INCLUDE_SATA) + mvSataAddrDecShow(); +#endif +#if defined(MV_INCLUDE_AUDIO) + mvAudioAddrDecShow(); +#endif +#if defined(MV_INCLUDE_TS) + mvTsuAddrDecShow(); +#endif +} + +/******************************************************************************* +* ctrlSizeToReg - Extract size value for register assignment. +* +* DESCRIPTION: +* Address decode size parameter must be programed from LSB to MSB as +* sequence of 1's followed by sequence of 0's. The number of 1's +* specifies the size of the window in 64 KB granularity (e.g. a +* value of 0x00ff specifies 256x64k = 16 MB). +* This function extract the size value from the size parameter according +* to given aligment paramter. For example for size 0x1000000 (16MB) and +* aligment 0x10000 (64KB) the function will return 0x00FF. +* +* INPUT: +* size - Size. +* alignment - Size alignment. Note that alignment must be power of 2! +* +* OUTPUT: +* None. +* +* RETURN: +* 32bit describing size register value correspond to size parameter. +* If value is '-1' size parameter or aligment are invalid. +*******************************************************************************/ +MV_U32 ctrlSizeToReg(MV_U32 size, MV_U32 alignment) +{ + MV_U32 retVal; + + /* Check size parameter alignment */ + if ((0 == size) || (MV_IS_NOT_ALIGN(size, alignment))) + { + DB(mvOsPrintf("ctrlSizeToReg: ERR. Size is zero or not aligned.\n")); + return -1; + } + + /* Take out the "alignment" portion out of the size parameter */ + alignment--; /* Now the alignmet is a sequance of '1' (e.g. 0xffff) */ + /* and size is 0x1000000 (16MB) for example */ + while(alignment & 1) /* Check that alignmet LSB is set */ + { + size = (size >> 1); /* If LSB is set, move 'size' one bit to right */ + alignment = (alignment >> 1); + } + + /* If after the alignment first '0' was met we still have '1' in */ + /* it then aligment is invalid (not power of 2) */ + if (alignment) + { + DB(mvOsPrintf("ctrlSizeToReg: ERR. Alignment parameter 0x%x invalid.\n", + (MV_U32)alignment)); + return -1; + } + + /* Now the size is shifted right according to aligment: 0x0100 */ + size--; /* Now the size is a sequance of '1': 0x00ff */ + + retVal = size ; + + /* Check that LSB to MSB is sequence of 1's followed by sequence of 0's */ + while(size & 1) /* Check that LSB is set */ + { + size = (size >> 1); /* If LSB is set, move one bit to the right */ + } + + if (size) /* Sequance of 1's is over. Check that we have no other 1's */ + { + DB(mvOsPrintf("ctrlSizeToReg: ERR. Size parameter 0x%x invalid.\n", + size)); + return -1; + } + + return retVal; + +} + +/******************************************************************************* +* ctrlRegToSize - Extract size value from register value. +* +* DESCRIPTION: +* This function extract a size value from the register size parameter +* according to given aligment paramter. For example for register size +* value 0xff and aligment 0x10000 the function will return 0x01000000. +* +* INPUT: +* regSize - Size as in register format. See ctrlSizeToReg. +* alignment - Size alignment. Note that alignment must be power of 2! +* +* OUTPUT: +* None. +* +* RETURN: +* 32bit describing size. +* If value is '-1' size parameter or aligment are invalid. +*******************************************************************************/ +MV_U32 ctrlRegToSize(MV_U32 regSize, MV_U32 alignment) +{ + MV_U32 temp; + + /* Check that LSB to MSB is sequence of 1's followed by sequence of 0's */ + temp = regSize; /* Now the size is a sequance of '1': 0x00ff */ + + while(temp & 1) /* Check that LSB is set */ + { + temp = (temp >> 1); /* If LSB is set, move one bit to the right */ + } + + if (temp) /* Sequance of 1's is over. Check that we have no other 1's */ + { + DB(mvOsPrintf("ctrlRegToSize: ERR. Size parameter 0x%x invalid.\n", + regSize)); + return -1; + } + + + /* Check that aligment is a power of two */ + temp = alignment - 1;/* Now the alignmet is a sequance of '1' (0xffff) */ + + while(temp & 1) /* Check that alignmet LSB is set */ + { + temp = (temp >> 1); /* If LSB is set, move 'size' one bit to right */ + } + + /* If after the 'temp' first '0' was met we still have '1' in 'temp' */ + /* then 'temp' is invalid (not power of 2) */ + if (temp) + { + DB(mvOsPrintf("ctrlSizeToReg: ERR. Alignment parameter 0x%x invalid.\n", + alignment)); + return -1; + } + + regSize++; /* Now the size is 0x0100 */ + + /* Add in the "alignment" portion to the register size parameter */ + alignment--; /* Now the alignmet is a sequance of '1' (e.g. 0xffff) */ + + while(alignment & 1) /* Check that alignmet LSB is set */ + { + regSize = (regSize << 1); /* LSB is set, move 'size' one bit left */ + alignment = (alignment >> 1); + } + + return regSize; +} + + +/******************************************************************************* +* ctrlSizeRegRoundUp - Round up given size +* +* DESCRIPTION: +* This function round up a given size to a size that fits the +* restrictions of size format given an aligment parameter. +* to given aligment paramter. For example for size parameter 0xa1000 and +* aligment 0x1000 the function will return 0xFF000. +* +* INPUT: +* size - Size. +* alignment - Size alignment. Note that alignment must be power of 2! +* +* OUTPUT: +* None. +* +* RETURN: +* 32bit describing size value correspond to size in register. +*******************************************************************************/ +MV_U32 ctrlSizeRegRoundUp(MV_U32 size, MV_U32 alignment) +{ + MV_U32 msbBit = 0; + MV_U32 retSize; + + /* Check if size parameter is already comply with restriction */ + if (!(-1 == ctrlSizeToReg(size, alignment))) + { + return size; + } + + while(size) + { + size = (size >> 1); + msbBit++; + } + + retSize = (1 << msbBit); + + if (retSize < alignment) + { + return alignment; + } + else + { + return retSize; + } +} +/******************************************************************************* +* mvCtrlSysRstLengthCounterGet - Return number of milliseconds the reset button +* was pressed and clear counter +* +* DESCRIPTION: +* +* INPUT: +* +* OUTPUT: +* +* RETURN: number of milliseconds the reset button was pressed +*******************************************************************************/ +MV_U32 mvCtrlSysRstLengthCounterGet(MV_VOID) +{ + static volatile MV_U32 Count = 0; + + if(!Count) { + Count = (MV_REG_READ(SYSRST_LENGTH_COUNTER_REG) & SLCR_COUNT_MASK); + Count = (Count / (MV_BOARD_REFCLK_25MHZ / 1000)); + /* clear counter for next boot */ + MV_REG_BIT_SET(SYSRST_LENGTH_COUNTER_REG, SLCR_CLR_MASK); + } + + DB(mvOsPrintf("mvCtrlSysRstLengthCounterGet: Reset button was pressed for %u milliseconds\n", Count)); + + return Count; +} + +MV_BOOL mvCtrlIsBootFromSPI(MV_VOID) +{ + MV_U32 satr = 0; + satr = MV_REG_READ(MPP_SAMPLE_AT_RESET); + if(mvCtrlModelGet() == MV_6180_DEV_ID) + { + if (MSAR_BOOT_MODE_6180(satr) == MSAR_BOOT_SPI_WITH_BOOTROM_6180) + return MV_TRUE; + else + return MV_FALSE; + } + satr = satr & MSAR_BOOT_MODE_MASK; + if (satr == MSAR_BOOT_SPI_WITH_BOOTROM) + return MV_TRUE; + else + return MV_FALSE; +} + +MV_BOOL mvCtrlIsBootFromSPIUseNAND(MV_VOID) +{ + MV_U32 satr = 0; + if(mvCtrlModelGet() == MV_6180_DEV_ID) + return MV_FALSE; + satr = MV_REG_READ(MPP_SAMPLE_AT_RESET); + satr = satr & MSAR_BOOT_MODE_MASK; + + if (satr == MSAR_BOOT_SPI_USE_NAND_WITH_BOOTROM) + return MV_TRUE; + else + return MV_FALSE; +} + +MV_BOOL mvCtrlIsBootFromNAND(MV_VOID) +{ + MV_U32 satr = 0; + satr = MV_REG_READ(MPP_SAMPLE_AT_RESET); + if(mvCtrlModelGet() == MV_6180_DEV_ID) + { + if (MSAR_BOOT_MODE_6180(satr) == MSAR_BOOT_NAND_WITH_BOOTROM_6180) + return MV_TRUE; + else + return MV_FALSE; + } + satr = satr & MSAR_BOOT_MODE_MASK; + if ((satr == MSAR_BOOT_NAND_WITH_BOOTROM)) + return MV_TRUE; + else + return MV_FALSE; +} + +#if defined(MV_INCLUDE_CLK_PWR_CNTRL) +/******************************************************************************* +* mvCtrlPwrSaveOn - Set Power save mode +* +* DESCRIPTION: +* +* INPUT: +* +* OUTPUT: +* +* RETURN: +*******************************************************************************/ +MV_VOID mvCtrlPwrSaveOn(MV_VOID) +{ + unsigned long old,temp; + /* Disable int */ + __asm__ __volatile__("mrs %0, cpsr\n" + "orr %1, %0, #0xc0\n" + "msr cpsr_c, %1" + : "=r" (old), "=r" (temp) + : + : "memory"); + + /* Set SoC in power save */ + MV_REG_BIT_SET(POWER_MNG_CTRL_REG, BIT11); + /* Wait for int */ + __asm__ __volatile__("mcr p15, 0, r0, c7, c0, 4"); + + /* Enabled int */ + __asm__ __volatile__("msr cpsr_c, %0" + : + : "r" (old) + : "memory"); +} + + + +/******************************************************************************* +* mvCtrlPwrSaveOff - Go out of power save mode +* +* DESCRIPTION: +* +* INPUT: +* +* OUTPUT: +* +* RETURN: +*******************************************************************************/ +MV_VOID mvCtrlPwrSaveOff(MV_VOID) +{ + unsigned long old,temp; + /* Disable int */ + __asm__ __volatile__("mrs %0, cpsr\n" + "orr %1, %0, #0xc0\n" + "msr cpsr_c, %1" + : "=r" (old), "=r" (temp) + : + : "memory"); + + /* Set SoC in power save */ + MV_REG_BIT_RESET(POWER_MNG_CTRL_REG, BIT11); + /* Wait for int */ + __asm__ __volatile__("mcr p15, 0, r0, c7, c0, 4"); + + /* Enabled int */ + __asm__ __volatile__("msr cpsr_c, %0" + : + : "r" (old) + : "memory"); +} + +/******************************************************************************* +* mvCtrlPwrClckSet - Set Power State for specific Unit +* +* DESCRIPTION: +* +* INPUT: +* +* OUTPUT: +* +* RETURN: +*******************************************************************************/ +MV_VOID mvCtrlPwrClckSet(MV_UNIT_ID unitId, MV_U32 index, MV_BOOL enable) +{ + switch (unitId) + { +#if defined(MV_INCLUDE_PEX) + case PEX_UNIT_ID: + if (enable == MV_FALSE) + { + MV_REG_BIT_RESET(POWER_MNG_CTRL_REG, PMC_PEXSTOPCLOCK_MASK); + } + else + { + MV_REG_BIT_SET(POWER_MNG_CTRL_REG, PMC_PEXSTOPCLOCK_MASK); + } + break; +#endif +#if defined(MV_INCLUDE_GIG_ETH) + case ETH_GIG_UNIT_ID: + if (enable == MV_FALSE) + { + MV_REG_BIT_RESET(POWER_MNG_CTRL_REG, PMC_GESTOPCLOCK_MASK(index)); + } + else + { + MV_REG_BIT_SET(POWER_MNG_CTRL_REG, PMC_GESTOPCLOCK_MASK(index)); + } + break; +#endif +#if defined(MV_INCLUDE_INTEG_SATA) + case SATA_UNIT_ID: + if (enable == MV_FALSE) + { + MV_REG_BIT_RESET(POWER_MNG_CTRL_REG, PMC_SATASTOPCLOCK_MASK(index)); + } + else + { + MV_REG_BIT_SET(POWER_MNG_CTRL_REG, PMC_SATASTOPCLOCK_MASK(index)); + } + break; +#endif +#if defined(MV_INCLUDE_CESA) + case CESA_UNIT_ID: + if (enable == MV_FALSE) + { + MV_REG_BIT_RESET(POWER_MNG_CTRL_REG, PMC_SESTOPCLOCK_MASK); + } + else + { + MV_REG_BIT_SET(POWER_MNG_CTRL_REG, PMC_SESTOPCLOCK_MASK); + } + break; +#endif +#if defined(MV_INCLUDE_USB) + case USB_UNIT_ID: + if (enable == MV_FALSE) + { + MV_REG_BIT_RESET(POWER_MNG_CTRL_REG, PMC_USBSTOPCLOCK_MASK); + } + else + { + MV_REG_BIT_SET(POWER_MNG_CTRL_REG, PMC_USBSTOPCLOCK_MASK); + } + break; +#endif +#if defined(MV_INCLUDE_AUDIO) + case AUDIO_UNIT_ID: + if (enable == MV_FALSE) + { + MV_REG_BIT_RESET(POWER_MNG_CTRL_REG, PMC_AUDIOSTOPCLOCK_MASK); + } + else + { + MV_REG_BIT_SET(POWER_MNG_CTRL_REG, PMC_AUDIOSTOPCLOCK_MASK); + } + break; +#endif +#if defined(MV_INCLUDE_TS) + case TS_UNIT_ID: + if (enable == MV_FALSE) + { + MV_REG_BIT_RESET(POWER_MNG_CTRL_REG, PMC_TSSTOPCLOCK_MASK); + } + else + { + MV_REG_BIT_SET(POWER_MNG_CTRL_REG, PMC_TSSTOPCLOCK_MASK); + } + break; +#endif +#if defined(MV_INCLUDE_SDIO) + case SDIO_UNIT_ID: + if (enable == MV_FALSE) + { + MV_REG_BIT_RESET(POWER_MNG_CTRL_REG, PMC_SDIOSTOPCLOCK_MASK); + } + else + { + MV_REG_BIT_SET(POWER_MNG_CTRL_REG, PMC_SDIOSTOPCLOCK_MASK); + } + break; +#endif +#if defined(MV_INCLUDE_TDM) + case TDM_UNIT_ID: + if (enable == MV_FALSE) + { + MV_REG_BIT_RESET(POWER_MNG_CTRL_REG, PMC_TDMSTOPCLOCK_MASK); + } + else + { + MV_REG_BIT_SET(POWER_MNG_CTRL_REG, PMC_TDMSTOPCLOCK_MASK); + } + break; +#endif + + default: + + break; + + } +} + +/******************************************************************************* +* mvCtrlPwrClckGet - Get Power State of specific Unit +* +* DESCRIPTION: +* +* INPUT: +* +* OUTPUT: +* +* RETURN: +******************************************************************************/ +MV_BOOL mvCtrlPwrClckGet(MV_UNIT_ID unitId, MV_U32 index) +{ + MV_U32 reg = MV_REG_READ(POWER_MNG_CTRL_REG); + MV_BOOL state = MV_TRUE; + + switch (unitId) + { +#if defined(MV_INCLUDE_PEX) + case PEX_UNIT_ID: + if ((reg & PMC_PEXSTOPCLOCK_MASK) == PMC_PEXSTOPCLOCK_STOP) + { + state = MV_FALSE; + } + else state = MV_TRUE; + + break; +#endif +#if defined(MV_INCLUDE_GIG_ETH) + case ETH_GIG_UNIT_ID: + if ((reg & PMC_GESTOPCLOCK_MASK(index)) == PMC_GESTOPCLOCK_STOP(index)) + { + state = MV_FALSE; + } + else state = MV_TRUE; + break; +#endif +#if defined(MV_INCLUDE_SATA) + case SATA_UNIT_ID: + if ((reg & PMC_SATASTOPCLOCK_MASK(index)) == PMC_SATASTOPCLOCK_STOP(index)) + { + state = MV_FALSE; + } + else state = MV_TRUE; + break; +#endif +#if defined(MV_INCLUDE_CESA) + case CESA_UNIT_ID: + if ((reg & PMC_SESTOPCLOCK_MASK) == PMC_SESTOPCLOCK_STOP) + { + state = MV_FALSE; + } + else state = MV_TRUE; + break; +#endif +#if defined(MV_INCLUDE_USB) + case USB_UNIT_ID: + if ((reg & PMC_USBSTOPCLOCK_MASK) == PMC_USBSTOPCLOCK_STOP) + { + state = MV_FALSE; + } + else state = MV_TRUE; + break; +#endif +#if defined(MV_INCLUDE_AUDIO) + case AUDIO_UNIT_ID: + if ((reg & PMC_AUDIOSTOPCLOCK_MASK) == PMC_AUDIOSTOPCLOCK_STOP) + { + state = MV_FALSE; + } + else state = MV_TRUE; + break; +#endif +#if defined(MV_INCLUDE_TS) + case TS_UNIT_ID: + if ((reg & PMC_TSSTOPCLOCK_MASK) == PMC_TSSTOPCLOCK_STOP) + { + state = MV_FALSE; + } + else state = MV_TRUE; + break; +#endif +#if defined(MV_INCLUDE_SDIO) + case SDIO_UNIT_ID: + if ((reg & PMC_SDIOSTOPCLOCK_MASK)== PMC_SDIOSTOPCLOCK_STOP) + { + state = MV_FALSE; + } + else state = MV_TRUE; + break; +#endif +#if defined(MV_INCLUDE_TDM) + case TDM_UNIT_ID: + if ((reg & PMC_TDMSTOPCLOCK_MASK) == PMC_TDMSTOPCLOCK_STOP) + { + state = MV_FALSE; + } + else state = MV_TRUE; + break; +#endif + + default: + state = MV_TRUE; + break; + } + + + return state; +} +/******************************************************************************* +* mvCtrlPwrMemSet - Set Power State for memory on specific Unit +* +* DESCRIPTION: +* +* INPUT: +* +* OUTPUT: +* +* RETURN: +*******************************************************************************/ +MV_VOID mvCtrlPwrMemSet(MV_UNIT_ID unitId, MV_U32 index, MV_BOOL enable) +{ + switch (unitId) + { +#if defined(MV_INCLUDE_PEX) + case PEX_UNIT_ID: + if (enable == MV_FALSE) + { + MV_REG_BIT_SET(POWER_MNG_MEM_CTRL_REG, PMC_PEXSTOPMEM_MASK); + } + else + { + MV_REG_BIT_RESET(POWER_MNG_MEM_CTRL_REG, PMC_PEXSTOPMEM_MASK); + } + break; +#endif +#if defined(MV_INCLUDE_GIG_ETH) + case ETH_GIG_UNIT_ID: + if (enable == MV_FALSE) + { + MV_REG_BIT_SET(POWER_MNG_MEM_CTRL_REG, PMC_GESTOPMEM_MASK(index)); + } + else + { + MV_REG_BIT_RESET(POWER_MNG_MEM_CTRL_REG, PMC_GESTOPMEM_MASK(index)); + } + break; +#endif +#if defined(MV_INCLUDE_INTEG_SATA) + case SATA_UNIT_ID: + if (enable == MV_FALSE) + { + MV_REG_BIT_SET(POWER_MNG_MEM_CTRL_REG, PMC_SATASTOPMEM_MASK(index)); + } + else + { + MV_REG_BIT_RESET(POWER_MNG_MEM_CTRL_REG, PMC_SATASTOPMEM_MASK(index)); + } + break; +#endif +#if defined(MV_INCLUDE_CESA) + case CESA_UNIT_ID: + if (enable == MV_FALSE) + { + MV_REG_BIT_SET(POWER_MNG_MEM_CTRL_REG, PMC_SESTOPMEM_MASK); + } + else + { + MV_REG_BIT_RESET(POWER_MNG_MEM_CTRL_REG, PMC_SESTOPMEM_MASK); + } + break; +#endif +#if defined(MV_INCLUDE_USB) + case USB_UNIT_ID: + if (enable == MV_FALSE) + { + MV_REG_BIT_SET(POWER_MNG_MEM_CTRL_REG, PMC_USBSTOPMEM_MASK); + } + else + { + MV_REG_BIT_RESET(POWER_MNG_MEM_CTRL_REG, PMC_USBSTOPMEM_MASK); + } + break; +#endif +#if defined(MV_INCLUDE_AUDIO) + case AUDIO_UNIT_ID: + if (enable == MV_FALSE) + { + MV_REG_BIT_SET(POWER_MNG_MEM_CTRL_REG, PMC_AUDIOSTOPMEM_MASK); + } + else + { + MV_REG_BIT_RESET(POWER_MNG_MEM_CTRL_REG, PMC_AUDIOSTOPMEM_MASK); + } + break; +#endif +#if defined(MV_INCLUDE_XOR) + case XOR_UNIT_ID: + if (enable == MV_FALSE) + { + MV_REG_BIT_SET(POWER_MNG_MEM_CTRL_REG, PMC_XORSTOPMEM_MASK(index)); + } + else + { + MV_REG_BIT_RESET(POWER_MNG_MEM_CTRL_REG, PMC_XORSTOPMEM_MASK(index)); + } + break; +#endif + default: + + break; + + } +} + +/******************************************************************************* +* mvCtrlPwrMemGet - Get Power State of memory on specific Unit +* +* DESCRIPTION: +* +* INPUT: +* +* OUTPUT: +* +* RETURN: +******************************************************************************/ +MV_BOOL mvCtrlPwrMemGet(MV_UNIT_ID unitId, MV_U32 index) +{ + MV_U32 reg = MV_REG_READ(POWER_MNG_MEM_CTRL_REG); + MV_BOOL state = MV_TRUE; + + switch (unitId) + { +#if defined(MV_INCLUDE_PEX) + case PEX_UNIT_ID: + if ((reg & PMC_PEXSTOPMEM_MASK) == PMC_PEXSTOPMEM_STOP) + { + state = MV_FALSE; + } + else state = MV_TRUE; + + break; +#endif +#if defined(MV_INCLUDE_GIG_ETH) + case ETH_GIG_UNIT_ID: + if ((reg & PMC_GESTOPMEM_MASK(index)) == PMC_GESTOPMEM_STOP(index)) + { + state = MV_FALSE; + } + else state = MV_TRUE; + break; +#endif +#if defined(MV_INCLUDE_SATA) + case SATA_UNIT_ID: + if ((reg & PMC_SATASTOPMEM_MASK(index)) == PMC_SATASTOPMEM_STOP(index)) + { + state = MV_FALSE; + } + else state = MV_TRUE; + break; +#endif +#if defined(MV_INCLUDE_CESA) + case CESA_UNIT_ID: + if ((reg & PMC_SESTOPMEM_MASK) == PMC_SESTOPMEM_STOP) + { + state = MV_FALSE; + } + else state = MV_TRUE; + break; +#endif +#if defined(MV_INCLUDE_USB) + case USB_UNIT_ID: + if ((reg & PMC_USBSTOPMEM_MASK) == PMC_USBSTOPMEM_STOP) + { + state = MV_FALSE; + } + else state = MV_TRUE; + break; +#endif +#if defined(MV_INCLUDE_AUDIO) + case AUDIO_UNIT_ID: + if ((reg & PMC_AUDIOSTOPMEM_MASK) == PMC_AUDIOSTOPMEM_STOP) + { + state = MV_FALSE; + } + else state = MV_TRUE; + break; +#endif +#if defined(MV_INCLUDE_XOR) + case XOR_UNIT_ID: + if ((reg & PMC_XORSTOPMEM_MASK(index)) == PMC_XORSTOPMEM_STOP(index)) + { + state = MV_FALSE; + } + else state = MV_TRUE; + break; +#endif + + default: + state = MV_TRUE; + break; + } + + + return state; +} +#else +MV_VOID mvCtrlPwrClckSet(MV_UNIT_ID unitId, MV_U32 index, MV_BOOL enable) {return;} +MV_BOOL mvCtrlPwrClckGet(MV_UNIT_ID unitId, MV_U32 index) {return MV_TRUE;} +#endif /* #if defined(MV_INCLUDE_CLK_PWR_CNTRL) */ + + +/******************************************************************************* +* mvMPPConfigToSPI - Change MPP[3:0] configuration to SPI mode +* +* DESCRIPTION: +* +* INPUT: +* +* OUTPUT: +* +* RETURN: +******************************************************************************/ +MV_VOID mvMPPConfigToSPI(MV_VOID) +{ + MV_U32 mppVal = 0; + MV_U32 bootVal = 0; + + if(!mvCtrlIsBootFromSPIUseNAND()) + return; + mppVal = 0x00002220; /* Set MPP [3:1] to SPI mode */ + bootVal = MV_REG_READ(mvCtrlMppRegGet(0)); + bootVal &= 0xffff000f; + mppVal |= bootVal; + + MV_REG_WRITE(mvCtrlMppRegGet(0), mppVal); +} + + +/******************************************************************************* +* mvMPPConfigToDefault - Change MPP[7:0] configuration to default configuration +* +* DESCRIPTION: +* +* INPUT: +* +* OUTPUT: +* +* RETURN: +******************************************************************************/ +MV_VOID mvMPPConfigToDefault(MV_VOID) +{ + MV_U32 mppVal = 0; + MV_U32 bootVal = 0; + + if(!mvCtrlIsBootFromSPIUseNAND()) + return; + mppVal = mvBoardMppGet(0); + bootVal = MV_REG_READ(mvCtrlMppRegGet(0)); + mppVal &= ~0xffff000f; + bootVal &= 0xffff000f; + mppVal |= bootVal; + + MV_REG_WRITE(mvCtrlMppRegGet(0), mppVal); +} + + diff --git a/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/kw_family/ctrlEnv/mvCtrlEnvLib.h b/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/kw_family/ctrlEnv/mvCtrlEnvLib.h new file mode 100644 index 0000000000..6e2e8137a7 --- /dev/null +++ b/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/kw_family/ctrlEnv/mvCtrlEnvLib.h @@ -0,0 +1,185 @@ +/******************************************************************************* +Copyright (C) Marvell International Ltd. and its affiliates + +This software file (the "File") is owned and distributed by Marvell +International Ltd. and/or its affiliates ("Marvell") under the following +alternative licensing terms. Once you have made an election to distribute the +File under one of the following license alternatives, please (i) delete this +introductory statement regarding license alternatives, (ii) delete the two +license alternatives that you have not elected to use and (iii) preserve the +Marvell copyright notice above. + +******************************************************************************** +Marvell Commercial License Option + +If you received this File from Marvell and you have entered into a commercial +license agreement (a "Commercial License") with Marvell, the File is licensed +to you under the terms of the applicable Commercial License. + +******************************************************************************** +Marvell GPL License Option + +If you received this File from Marvell, you may opt to use, redistribute and/or +modify this File in accordance with the terms and conditions of the General +Public License Version 2, June 1991 (the "GPL License"), a copy of which is +available along with the File in the license.txt file or by writing to the Free +Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or +on the worldwide web at http://www.gnu.org/licenses/gpl.txt. + +THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED +WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY +DISCLAIMED. The GPL License provides additional details about this warranty +disclaimer. +******************************************************************************** +Marvell BSD License Option + +If you received this File from Marvell, you may opt to use, redistribute and/or +modify this File under the following licensing terms. +Redistribution and use in source and binary forms, with or without modification, +are permitted provided that the following conditions are met: + + * Redistributions of source code must retain the above copyright notice, + this list of conditions and the following disclaimer. + + * Redistributions in binary form must reproduce the above copyright + notice, this list of conditions and the following disclaimer in the + documentation and/or other materials provided with the distribution. + + * Neither the name of Marvell nor the names of its contributors may be + used to endorse or promote products derived from this software without + specific prior written permission. + +THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND +ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED +WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE +DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR +ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES +(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; +LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON +ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS +SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + +*******************************************************************************/ + + +#ifndef __INCmvCtrlEnvLibh +#define __INCmvCtrlEnvLibh + +/* includes */ +#include "mvSysHwConfig.h" +#include "mvCommon.h" +#include "mvTypes.h" +#include "mvOs.h" +#include "boardEnv/mvBoardEnvLib.h" +#include "ctrlEnv/mvCtrlEnvSpec.h" +#include "ctrlEnv/mvCtrlEnvRegs.h" +#include "ctrlEnv/mvCtrlEnvAddrDec.h" + + +/* typedefs */ + +/* This enumerator describes the possible HW cache coherency policies the */ +/* controllers supports. */ +typedef enum _mvCachePolicy +{ + NO_COHERENCY, /* No HW cache coherency support */ + WT_COHERENCY, /* HW cache coherency supported in Write Through policy */ + WB_COHERENCY /* HW cache coherency supported in Write Back policy */ +}MV_CACHE_POLICY; + + +/* The swapping is referred to a 64-bit words (as this is the controller */ +/* internal data path width). This enumerator describes the possible */ +/* data swap types. Below is an example of the data 0x0011223344556677 */ +typedef enum _mvSwapType +{ + MV_BYTE_SWAP, /* Byte Swap 77 66 55 44 33 22 11 00 */ + MV_NO_SWAP, /* No swapping 00 11 22 33 44 55 66 77 */ + MV_BYTE_WORD_SWAP, /* Both byte and word swap 33 22 11 00 77 66 55 44 */ + MV_WORD_SWAP, /* Word swap 44 55 66 77 00 11 22 33 */ + SWAP_TYPE_MAX /* Delimiter for this enumerator */ +}MV_SWAP_TYPE; + +/* This structure describes access rights for Access protection windows */ +/* that can be found in IDMA, XOR, Ethernet and MPSC units. */ +/* Note that the permission enumerator coresponds to its register format. */ +/* For example, Read only premission is presented as "1" in register field. */ +typedef enum _mvAccessRights +{ + NO_ACCESS_ALLOWED = 0, /* No access allowed */ + READ_ONLY = 1, /* Read only permission */ + ACC_RESERVED = 2, /* Reserved access right */ + FULL_ACCESS = 3, /* Read and Write permission */ + MAX_ACC_RIGHTS +}MV_ACCESS_RIGHTS; + + +/* mcspLib.h API list */ + +MV_STATUS mvCtrlEnvInit(MV_VOID); +MV_U32 mvCtrlMppRegGet(MV_U32 mppGroup); + +#if defined(MV_INCLUDE_PEX) +MV_U32 mvCtrlPexMaxIfGet(MV_VOID); +#else +#define mvCtrlPexMaxIfGet() (0) +#endif + +#define mvCtrlPciIfMaxIfGet() (0) + +#if defined(MV_INCLUDE_GIG_ETH) +MV_U32 mvCtrlEthMaxPortGet(MV_VOID); +#endif +#if defined(MV_INCLUDE_XOR) +MV_U32 mvCtrlXorMaxChanGet(MV_VOID); +#endif +#if defined(MV_INCLUDE_USB) +MV_U32 mvCtrlUsbMaxGet(MV_VOID); +#endif +#if defined(MV_INCLUDE_NAND) +MV_U32 mvCtrlNandSupport(MV_VOID); +#endif +#if defined(MV_INCLUDE_SDIO) +MV_U32 mvCtrlSdioSupport(MV_VOID); +#endif +#if defined(MV_INCLUDE_TS) +MV_U32 mvCtrlTsSupport(MV_VOID); +#endif +#if defined(MV_INCLUDE_AUDIO) +MV_U32 mvCtrlAudioSupport(MV_VOID); +#endif +#if defined(MV_INCLUDE_TDM) +MV_U32 mvCtrlTdmSupport(MV_VOID); +#endif + +MV_U16 mvCtrlModelGet(MV_VOID); +MV_U8 mvCtrlRevGet(MV_VOID); +MV_STATUS mvCtrlNameGet(char *pNameBuff); +MV_U32 mvCtrlModelRevGet(MV_VOID); +MV_STATUS mvCtrlModelRevNameGet(char *pNameBuff); +MV_VOID mvCtrlAddrDecShow(MV_VOID); +const MV_8* mvCtrlTargetNameGet(MV_TARGET target); +MV_U32 ctrlSizeToReg(MV_U32 size, MV_U32 alignment); +MV_U32 ctrlRegToSize(MV_U32 regSize, MV_U32 alignment); +MV_U32 ctrlSizeRegRoundUp(MV_U32 size, MV_U32 alignment); +MV_U32 mvCtrlSysRstLengthCounterGet(MV_VOID); +MV_STATUS ctrlWinOverlapTest(MV_ADDR_WIN *pAddrWin1, MV_ADDR_WIN *pAddrWin2); +MV_STATUS ctrlWinWithinWinTest(MV_ADDR_WIN *pAddrWin1, MV_ADDR_WIN *pAddrWin2); + +MV_VOID mvCtrlPwrClckSet(MV_UNIT_ID unitId, MV_U32 index, MV_BOOL enable); +MV_BOOL mvCtrlPwrClckGet(MV_UNIT_ID unitId, MV_U32 index); +MV_VOID mvCtrlPwrMemSet(MV_UNIT_ID unitId, MV_U32 index, MV_BOOL enable); +MV_BOOL mvCtrlIsBootFromSPI(MV_VOID); +MV_BOOL mvCtrlIsBootFromSPIUseNAND(MV_VOID); +MV_BOOL mvCtrlIsBootFromNAND(MV_VOID); +#if defined(MV_INCLUDE_CLK_PWR_CNTRL) +MV_VOID mvCtrlPwrSaveOn(MV_VOID); +MV_VOID mvCtrlPwrSaveOff(MV_VOID); +#endif +MV_BOOL mvCtrlPwrMemGet(MV_UNIT_ID unitId, MV_U32 index); +MV_VOID mvMPPConfigToSPI(MV_VOID); +MV_VOID mvMPPConfigToDefault(MV_VOID); + + +#endif /* __INCmvCtrlEnvLibh */ diff --git a/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/kw_family/ctrlEnv/mvCtrlEnvRegs.h b/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/kw_family/ctrlEnv/mvCtrlEnvRegs.h new file mode 100644 index 0000000000..ae3f141a0d --- /dev/null +++ b/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/kw_family/ctrlEnv/mvCtrlEnvRegs.h @@ -0,0 +1,419 @@ +/******************************************************************************* +Copyright (C) Marvell International Ltd. and its affiliates + +This software file (the "File") is owned and distributed by Marvell +International Ltd. and/or its affiliates ("Marvell") under the following +alternative licensing terms. Once you have made an election to distribute the +File under one of the following license alternatives, please (i) delete this +introductory statement regarding license alternatives, (ii) delete the two +license alternatives that you have not elected to use and (iii) preserve the +Marvell copyright notice above. + +******************************************************************************** +Marvell Commercial License Option + +If you received this File from Marvell and you have entered into a commercial +license agreement (a "Commercial License") with Marvell, the File is licensed +to you under the terms of the applicable Commercial License. + +******************************************************************************** +Marvell GPL License Option + +If you received this File from Marvell, you may opt to use, redistribute and/or +modify this File in accordance with the terms and conditions of the General +Public License Version 2, June 1991 (the "GPL License"), a copy of which is +available along with the File in the license.txt file or by writing to the Free +Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or +on the worldwide web at http://www.gnu.org/licenses/gpl.txt. + +THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED +WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY +DISCLAIMED. The GPL License provides additional details about this warranty +disclaimer. +******************************************************************************** +Marvell BSD License Option + +If you received this File from Marvell, you may opt to use, redistribute and/or +modify this File under the following licensing terms. +Redistribution and use in source and binary forms, with or without modification, +are permitted provided that the following conditions are met: + + * Redistributions of source code must retain the above copyright notice, + this list of conditions and the following disclaimer. + + * Redistributions in binary form must reproduce the above copyright + notice, this list of conditions and the following disclaimer in the + documentation and/or other materials provided with the distribution. + + * Neither the name of Marvell nor the names of its contributors may be + used to endorse or promote products derived from this software without + specific prior written permission. + +THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND +ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED +WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE +DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR +ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES +(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; +LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON +ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS +SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + +*******************************************************************************/ + +#ifndef __INCmvCtrlEnvRegsh +#define __INCmvCtrlEnvRegsh + +#ifdef __cplusplus +extern "C" { +#endif /* __cplusplus */ + +/* CV Support */ +#define PEX0_MEM0 PEX0_MEM +#define PCI0_MEM0 PEX0_MEM + +/* Controller revision info */ +#define PCI_CLASS_CODE_AND_REVISION_ID 0x008 +#define PCCRIR_REVID_OFFS 0 /* Revision ID */ +#define PCCRIR_REVID_MASK (0xff << PCCRIR_REVID_OFFS) + +/* Controler environment registers offsets */ + +/* Power Managment Control */ +#define POWER_MNG_MEM_CTRL_REG 0x20118 + +#define PMC_GESTOPMEM_OFFS(port) ((port)? 13 : 0) +#define PMC_GESTOPMEM_MASK(port) (1 << PMC_GESTOPMEM_OFFS(port)) +#define PMC_GESTOPMEM_EN(port) (0 << PMC_GESTOPMEM_OFFS(port)) +#define PMC_GESTOPMEM_STOP(port) (1 << PMC_GESTOPMEM_OFFS(port)) + +#define PMC_PEXSTOPMEM_OFFS 1 +#define PMC_PEXSTOPMEM_MASK (1 << PMC_PEXSTOPMEM_OFFS) +#define PMC_PEXSTOPMEM_EN (0 << PMC_PEXSTOPMEM_OFFS) +#define PMC_PEXSTOPMEM_STOP (1 << PMC_PEXSTOPMEM_OFFS) + +#define PMC_USBSTOPMEM_OFFS 2 +#define PMC_USBSTOPMEM_MASK (1 << PMC_USBSTOPMEM_OFFS) +#define PMC_USBSTOPMEM_EN (0 << PMC_USBSTOPMEM_OFFS) +#define PMC_USBSTOPMEM_STOP (1 << PMC_USBSTOPMEM_OFFS) + +#define PMC_DUNITSTOPMEM_OFFS 3 +#define PMC_DUNITSTOPMEM_MASK (1 << PMC_DUNITSTOPMEM_OFFS) +#define PMC_DUNITSTOPMEM_EN (0 << PMC_DUNITSTOPMEM_OFFS) +#define PMC_DUNITSTOPMEM_STOP (1 << PMC_DUNITSTOPMEM_OFFS) + +#define PMC_RUNITSTOPMEM_OFFS 4 +#define PMC_RUNITSTOPMEM_MASK (1 << PMC_RUNITSTOPMEM_OFFS) +#define PMC_RUNITSTOPMEM_EN (0 << PMC_RUNITSTOPMEM_OFFS) +#define PMC_RUNITSTOPMEM_STOP (1 << PMC_RUNITSTOPMEM_OFFS) + +#define PMC_XORSTOPMEM_OFFS(port) (5+(port*2)) +#define PMC_XORSTOPMEM_MASK(port) (1 << PMC_XORSTOPMEM_OFFS(port)) +#define PMC_XORSTOPMEM_EN(port) (0 << PMC_XORSTOPMEM_OFFS(port)) +#define PMC_XORSTOPMEM_STOP(port) (1 << PMC_XORSTOPMEM_OFFS(port)) + +#define PMC_SATASTOPMEM_OFFS(port) (6+(port*5)) +#define PMC_SATASTOPMEM_MASK(port) (1 << PMC_SATASTOPMEM_OFFS(port)) +#define PMC_SATASTOPMEM_EN(port) (0 << PMC_SATASTOPMEM_OFFS(port)) +#define PMC_SATASTOPMEM_STOP(port) (1 << PMC_SATASTOPMEM_OFFS(port)) + +#define PMC_SESTOPMEM_OFFS 8 +#define PMC_SESTOPMEM_MASK (1 << PMC_SESTOPMEM_OFFS) +#define PMC_SESTOPMEM_EN (0 << PMC_SESTOPMEM_OFFS) +#define PMC_SESTOPMEM_STOP (1 << PMC_SESTOPMEM_OFFS) + +#define PMC_AUDIOSTOPMEM_OFFS 9 +#define PMC_AUDIOSTOPMEM_MASK (1 << PMC_AUDIOSTOPMEM_OFFS) +#define PMC_AUDIOSTOPMEM_EN (0 << PMC_AUDIOSTOPMEM_OFFS) +#define PMC_AUDIOSTOPMEM_STOP (1 << PMC_AUDIOSTOPMEM_OFFS) + +#define POWER_MNG_CTRL_REG 0x2011C + +#define PMC_GESTOPCLOCK_OFFS(port) ((port)? 19 : 0) +#define PMC_GESTOPCLOCK_MASK(port) (1 << PMC_GESTOPCLOCK_OFFS(port)) +#define PMC_GESTOPCLOCK_EN(port) (1 << PMC_GESTOPCLOCK_OFFS(port)) +#define PMC_GESTOPCLOCK_STOP(port) (0 << PMC_GESTOPCLOCK_OFFS(port)) + +#define PMC_PEXPHYSTOPCLOCK_OFFS 1 +#define PMC_PEXPHYSTOPCLOCK_MASK (1 << PMC_PEXPHYSTOPCLOCK_OFFS) +#define PMC_PEXPHYSTOPCLOCK_EN (1 << PMC_PEXPHYSTOPCLOCK_OFFS) +#define PMC_PEXPHYSTOPCLOCK_STOP (0 << PMC_PEXPHYSTOPCLOCK_OFFS) + +#define PMC_PEXSTOPCLOCK_OFFS 2 +#define PMC_PEXSTOPCLOCK_MASK (1 << PMC_PEXSTOPCLOCK_OFFS) +#define PMC_PEXSTOPCLOCK_EN (1 << PMC_PEXSTOPCLOCK_OFFS) +#define PMC_PEXSTOPCLOCK_STOP (0 << PMC_PEXSTOPCLOCK_OFFS) + +#define PMC_USBSTOPCLOCK_OFFS 3 +#define PMC_USBSTOPCLOCK_MASK (1 << PMC_USBSTOPCLOCK_OFFS) +#define PMC_USBSTOPCLOCK_EN (1 << PMC_USBSTOPCLOCK_OFFS) +#define PMC_USBSTOPCLOCK_STOP (0 << PMC_USBSTOPCLOCK_OFFS) + +#define PMC_SDIOSTOPCLOCK_OFFS 4 +#define PMC_SDIOSTOPCLOCK_MASK (1 << PMC_SDIOSTOPCLOCK_OFFS) +#define PMC_SDIOSTOPCLOCK_EN (1 << PMC_SDIOSTOPCLOCK_OFFS) +#define PMC_SDIOSTOPCLOCK_STOP (0 << PMC_SDIOSTOPCLOCK_OFFS) + +#define PMC_TSSTOPCLOCK_OFFS 5 +#define PMC_TSSTOPCLOCK_MASK (1 << PMC_TSSTOPCLOCK_OFFS) +#define PMC_TSSTOPCLOCK_EN (1 << PMC_TSSTOPCLOCK_OFFS) +#define PMC_TSSTOPCLOCK_STOP (0 << PMC_TSSTOPCLOCK_OFFS) + +#define PMC_AUDIOSTOPCLOCK_OFFS 9 +#define PMC_AUDIOSTOPCLOCK_MASK (1 << PMC_AUDIOSTOPCLOCK_OFFS) +#define PMC_AUDIOSTOPCLOCK_EN (1 << PMC_AUDIOSTOPCLOCK_OFFS) +#define PMC_AUDIOSTOPCLOCK_STOP (0 << PMC_AUDIOSTOPCLOCK_OFFS) + +#define PMC_POWERSAVE_OFFS 11 +#define PMC_POWERSAVE_MASK (1 << PMC_POWERSAVE_OFFS) +#define PMC_POWERSAVE_EN (1 << PMC_POWERSAVE_OFFS) +#define PMC_POWERSAVE_STOP (0 << PMC_POWERSAVE_OFFS) + + + + +#define PMC_SATASTOPCLOCK_OFFS(port) (14+(port)) +#define PMC_SATASTOPCLOCK_MASK(port) (1 << PMC_SATASTOPCLOCK_OFFS(port)) +#define PMC_SATASTOPCLOCK_EN(port) (1 << PMC_SATASTOPCLOCK_OFFS(port)) +#define PMC_SATASTOPCLOCK_STOP(port) (0 << PMC_SATASTOPCLOCK_OFFS(port)) + +#define PMC_SESTOPCLOCK_OFFS 17 +#define PMC_SESTOPCLOCK_MASK (1 << PMC_SESTOPCLOCK_OFFS) +#define PMC_SESTOPCLOCK_EN (1 << PMC_SESTOPCLOCK_OFFS) +#define PMC_SESTOPCLOCK_STOP (0 << PMC_SESTOPCLOCK_OFFS) + +#define PMC_TDMSTOPCLOCK_OFFS 20 +#define PMC_TDMSTOPCLOCK_MASK (1 << PMC_TDMSTOPCLOCK_OFFS) +#define PMC_TDMSTOPCLOCK_EN (1 << PMC_TDMSTOPCLOCK_OFFS) +#define PMC_TDMSTOPCLOCK_STOP (0 << PMC_TDMSTOPCLOCK_OFFS) + + +/* Controler environment registers offsets */ +#define MPP_CONTROL_REG0 0x10000 +#define MPP_CONTROL_REG1 0x10004 +#define MPP_CONTROL_REG2 0x10008 +#define MPP_CONTROL_REG3 0x1000C +#define MPP_CONTROL_REG4 0x10010 +#define MPP_CONTROL_REG5 0x10014 +#define MPP_CONTROL_REG6 0x10018 +#define MPP_SAMPLE_AT_RESET 0x10030 +#define CHIP_BOND_REG 0x10034 +#define SYSRST_LENGTH_COUNTER_REG 0x10050 +#define SLCR_COUNT_OFFS 0 +#define SLCR_COUNT_MASK (0x1FFFFFFF << SLCR_COUNT_OFFS) +#define SLCR_CLR_OFFS 31 +#define SLCR_CLR_MASK (1 << SLCR_CLR_OFFS) +#define PCKG_OPT_MASK 0x3 +#define MPP_OUTPUT_DRIVE_REG 0x100E0 +#define MPP_RGMII0_OUTPUT_DRIVE_OFFS 7 +#define MPP_3_3_RGMII0_OUTPUT_DRIVE (0x0 << MPP_RGMII0_OUTPUT_DRIVE_OFFS) +#define MPP_1_8_RGMII0_OUTPUT_DRIVE (0x1 << MPP_RGMII0_OUTPUT_DRIVE_OFFS) +#define MPP_RGMII1_OUTPUT_DRIVE_OFFS 15 +#define MPP_3_3_RGMII1_OUTPUT_DRIVE (0x0 << MPP_RGMII1_OUTPUT_DRIVE_OFFS) +#define MPP_1_8_RGMII1_OUTPUT_DRIVE (0x1 << MPP_RGMII1_OUTPUT_DRIVE_OFFS) + +#define MSAR_BOOT_MODE_OFFS 12 +#define MSAR_BOOT_MODE_MASK (0x7 << MSAR_BOOT_MODE_OFFS) +#define MSAR_BOOT_NAND_WITH_BOOTROM (0x5 << MSAR_BOOT_MODE_OFFS) +#define MSAR_BOOT_SPI_WITH_BOOTROM (0x4 << MSAR_BOOT_MODE_OFFS) +#define MSAR_BOOT_SPI_USE_NAND_WITH_BOOTROM (0x2 << MSAR_BOOT_MODE_OFFS) + +#define MSAR_BOOT_MODE_6180(X) (((X & 0x3000) >> 12) | \ + ((X & 0x2) << 1)) +#define MSAR_BOOT_SPI_WITH_BOOTROM_6180 0x1 +#define MSAR_BOOT_NAND_WITH_BOOTROM_6180 0x5 + +#define MSAR_TCLCK_OFFS 21 +#define MSAR_TCLCK_MASK (0x1 << MSAR_TCLCK_OFFS) +#define MSAR_TCLCK_166 (0x1 << MSAR_TCLCK_OFFS) +#define MSAR_TCLCK_200 (0x0 << MSAR_TCLCK_OFFS) + + +#define MSAR_CPUCLCK_EXTRACT(X) (((X & 0x2) >> 1) | ((X & 0x400000) >> 21) | \ + ((X & 0x18) >> 1)) + +#define MSAR_CPUCLCK_OFFS_6180 2 +#define MSAR_CPUCLCK_MASK_6180 (0x7 << MSAR_CPUCLCK_OFFS_6180) + +#define MSAR_DDRCLCK_RTIO_OFFS 5 +#define MSAR_DDRCLCK_RTIO_MASK (0xF << MSAR_DDRCLCK_RTIO_OFFS) + +#define MSAR_L2CLCK_EXTRACT(X) (((X & 0x600) >> 9) | ((X & 0x80000) >> 17)) + +#ifndef MV_ASMLANGUAGE +/* CPU clock for 6281,6192 0->Resereved */ +#define MV_CPU_CLCK_TBL { 0, 0, 0, 0, \ + 600000000, 0, 800000000, 1000000000, \ + 0, 1200000000, 0, 0, \ + 1500000000, 0, 0, 0} + +/* DDR clock RATIO for 6281,6192 {0,0}->Reserved */ +#define MV_DDR_CLCK_RTIO_TBL {\ + {0, 0}, {0, 0}, {2, 1}, {0, 0}, \ + {3, 1}, {0, 0}, {4, 1}, {9, 2}, \ + {5, 1}, {6, 1}, {0, 0}, {0, 0}, \ + {0, 0}, {0, 0}, {0, 0}, {0, 0} \ +} + +/* L2 clock RATIO for 6281,6192 {1,1}->Reserved */ +#define MV_L2_CLCK_RTIO_TBL {\ + {0, 0}, {2, 1}, {0, 0}, {3, 1}, \ + {0, 0}, {0, 0}, {0, 0}, {0, 0} \ +} + +/* 6180 have different clk reset sampling */ +/* ARM CPU, DDR, L2 clock for 6180 {0,0,0}->Reserved */ +#define MV_CPU6180_DDR_L2_CLCK_TBL { \ + {0, 0, 0 },\ + {0, 0, 0 },\ + {0, 0, 0 },\ + {0, 0, 0 },\ + {0, 0, 0 },\ + {600000000, 200000000, 300000000 },\ + {800000000, 200000000, 400000000 },\ + {0, 0, 0 }\ +} + + + +/* These macros help units to identify a target Mbus Arbiter group */ +#define MV_TARGET_IS_DRAM(target) \ + ((target >= SDRAM_CS0) && (target <= SDRAM_CS3)) + +#define MV_TARGET_IS_PEX0(target) \ + ((target >= PEX0_MEM) && (target <= PEX0_IO)) + +#define MV_TARGET_IS_PEX1(target) 0 + +#define MV_TARGET_IS_PEX(target) (MV_TARGET_IS_PEX0(target) || MV_TARGET_IS_PEX1(target)) + +#define MV_TARGET_IS_DEVICE(target) \ + ((target >= DEVICE_CS0) && (target <= DEVICE_CS3)) + +#define MV_PCI_DRAM_BAR_TO_DRAM_TARGET(bar) 0 + +#define MV_TARGET_IS_AS_BOOT(target) ((target) == (sampleAtResetTargetArray[ \ + (mvCtrlModelGet() == MV_6180_DEV_ID)? MSAR_BOOT_MODE_6180 \ + (MV_REG_READ(MPP_SAMPLE_AT_RESET)):((MV_REG_READ(MPP_SAMPLE_AT_RESET)\ + & MSAR_BOOT_MODE_MASK) >> MSAR_BOOT_MODE_OFFS)])) + + +#define MV_CHANGE_BOOT_CS(target) (((target) == DEV_BOOCS)?\ + sampleAtResetTargetArray[(mvCtrlModelGet() == MV_6180_DEV_ID)? \ + MSAR_BOOT_MODE_6180(MV_REG_READ(MPP_SAMPLE_AT_RESET)): \ + ((MV_REG_READ(MPP_SAMPLE_AT_RESET) & MSAR_BOOT_MODE_MASK)\ + >> MSAR_BOOT_MODE_OFFS)]:(target)) + +#define TCLK_TO_COUNTER_RATIO 1 /* counters running in Tclk */ + +#define BOOT_TARGETS_NAME_ARRAY { \ + TBL_TERM, \ + TBL_TERM, \ + BOOT_ROM_CS, \ + TBL_TERM, \ + BOOT_ROM_CS, \ + BOOT_ROM_CS, \ + TBL_TERM, \ + TBL_TERM \ +} + +#define BOOT_TARGETS_NAME_ARRAY_6180 { \ + TBL_TERM, \ + BOOT_ROM_CS, \ + TBL_TERM, \ + TBL_TERM, \ + TBL_TERM, \ + BOOT_ROM_CS, \ + TBL_TERM, \ + TBL_TERM \ +} + + +/* For old competability */ +#define DEVICE_CS0 NFLASH_CS +#define DEVICE_CS1 SPI_CS +#define DEVICE_CS2 BOOT_ROM_CS +#define DEVICE_CS3 DEV_BOOCS +#define MV_BOOTDEVICE_INDEX 0 + +#define START_DEV_CS DEV_CS0 +#define DEV_TO_TARGET(dev) ((dev) + DEVICE_CS0) + +#define PCI_IF0_MEM0 PEX0_MEM +#define PCI_IF0_IO PEX0_IO + + +/* This enumerator defines the Marvell controller target ID */ +typedef enum _mvTargetId +{ + DRAM_TARGET_ID = 0 , /* Port 0 -> DRAM interface */ + DEV_TARGET_ID = 1, /* Port 1 -> Nand/SPI */ + PEX0_TARGET_ID = 4 , /* Port 4 -> PCI Express0 */ + CRYPT_TARGET_ID = 3 , /* Port 3 --> Crypto Engine */ + SAGE_TARGET_ID = 12 , /* Port 12 -> SAGE Unit */ + MAX_TARGETS_ID +}MV_TARGET_ID; + + +/* This enumerator described the possible Controller paripheral targets. */ +/* Controller peripherals are designated memory/IO address spaces that the */ +/* controller can access. They are also refered as "targets" */ +typedef enum _mvTarget +{ + TBL_TERM = -1, /* none valid target, used as targets list terminator*/ + SDRAM_CS0, /* SDRAM chip select 0 */ + SDRAM_CS1, /* SDRAM chip select 1 */ + SDRAM_CS2, /* SDRAM chip select 2 */ + SDRAM_CS3, /* SDRAM chip select 3 */ + PEX0_MEM, /* PCI Express 0 Memory */ + PEX0_IO, /* PCI Express 0 IO */ + INTER_REGS, /* Internal registers */ + NFLASH_CS, /* NFLASH_CS */ + SPI_CS, /* SPI_CS */ + BOOT_ROM_CS, /* BOOT_ROM_CS */ + DEV_BOOCS, /* DEV_BOOCS */ + CRYPT_ENG, /* Crypto Engine */ +#ifdef MV_INCLUDE_SAGE + SAGE_UNIT, /* SAGE Unit */ +#endif + MAX_TARGETS + +}MV_TARGET; + +#define TARGETS_DEF_ARRAY { \ + {0x0E, DRAM_TARGET_ID }, /* SDRAM_CS0 */ \ + {0x0D, DRAM_TARGET_ID }, /* SDRAM_CS1 */ \ + {0x0B, DRAM_TARGET_ID }, /* SDRAM_CS0 */ \ + {0x07, DRAM_TARGET_ID }, /* SDRAM_CS1 */ \ + {0xE8, PEX0_TARGET_ID }, /* PEX0_MEM */ \ + {0xE0, PEX0_TARGET_ID }, /* PEX0_IO */ \ + {0xFF, 0xFF }, /* INTER_REGS */ \ + {0x2F, DEV_TARGET_ID }, /* NFLASH_CS */ \ + {0x1E, DEV_TARGET_ID }, /* SPI_CS */ \ + {0x1D, DEV_TARGET_ID }, /* BOOT_ROM_CS */ \ + {0x1E, DEV_TARGET_ID }, /* DEV_BOOCS */ \ + {0x01, CRYPT_TARGET_ID}, /* CRYPT_ENG */ \ + {0x00, SAGE_TARGET_ID } \ +} + + +#define TARGETS_NAME_ARRAY { \ + "SDRAM_CS0", /* SDRAM_CS0 */ \ + "SDRAM_CS1", /* SDRAM_CS1 */ \ + "SDRAM_CS2", /* SDRAM_CS2 */ \ + "SDRAM_CS3", /* SDRAM_CS3 */ \ + "PEX0_MEM", /* PEX0_MEM */ \ + "PEX0_IO", /* PEX0_IO */ \ + "INTER_REGS", /* INTER_REGS */ \ + "NFLASH_CS", /* NFLASH_CS */ \ + "SPI_CS", /* SPI_CS */ \ + "BOOT_ROM_CS", /* BOOT_ROM_CS */ \ + "DEV_BOOTCS", /* DEV_BOOCS */ \ + "CRYPT_ENG", /* CRYPT_ENG */ \ + "SAGE_UNIT" /* SAGE_UNIT */ \ +} +#endif /* MV_ASMLANGUAGE */ + + +#endif diff --git a/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/kw_family/ctrlEnv/mvCtrlEnvSpec.h b/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/kw_family/ctrlEnv/mvCtrlEnvSpec.h new file mode 100644 index 0000000000..e41d80a426 --- /dev/null +++ b/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/kw_family/ctrlEnv/mvCtrlEnvSpec.h @@ -0,0 +1,257 @@ +/******************************************************************************* +Copyright (C) Marvell International Ltd. and its affiliates + +This software file (the "File") is owned and distributed by Marvell +International Ltd. and/or its affiliates ("Marvell") under the following +alternative licensing terms. Once you have made an election to distribute the +File under one of the following license alternatives, please (i) delete this +introductory statement regarding license alternatives, (ii) delete the two +license alternatives that you have not elected to use and (iii) preserve the +Marvell copyright notice above. + +******************************************************************************** +Marvell Commercial License Option + +If you received this File from Marvell and you have entered into a commercial +license agreement (a "Commercial License") with Marvell, the File is licensed +to you under the terms of the applicable Commercial License. + +******************************************************************************** +Marvell GPL License Option + +If you received this File from Marvell, you may opt to use, redistribute and/or +modify this File in accordance with the terms and conditions of the General +Public License Version 2, June 1991 (the "GPL License"), a copy of which is +available along with the File in the license.txt file or by writing to the Free +Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or +on the worldwide web at http://www.gnu.org/licenses/gpl.txt. + +THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED +WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY +DISCLAIMED. The GPL License provides additional details about this warranty +disclaimer. +******************************************************************************** +Marvell BSD License Option + +If you received this File from Marvell, you may opt to use, redistribute and/or +modify this File under the following licensing terms. +Redistribution and use in source and binary forms, with or without modification, +are permitted provided that the following conditions are met: + + * Redistributions of source code must retain the above copyright notice, + this list of conditions and the following disclaimer. + + * Redistributions in binary form must reproduce the above copyright + notice, this list of conditions and the following disclaimer in the + documentation and/or other materials provided with the distribution. + + * Neither the name of Marvell nor the names of its contributors may be + used to endorse or promote products derived from this software without + specific prior written permission. + +THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND +ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED +WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE +DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR +ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES +(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; +LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON +ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS +SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + +*******************************************************************************/ + +#ifndef __INCmvCtrlEnvSpech +#define __INCmvCtrlEnvSpech + +#include "mvDeviceId.h" +#include "mvSysHwConfig.h" + +#ifdef __cplusplus +extern "C" { +#endif /* __cplusplus */ + +#define MV_ARM_SOC +#define SOC_NAME_PREFIX "MV88F" + + +/* units base and port numbers */ +#ifdef MV_ASMLANGUAGE +#define XOR_UNIT_BASE(unit) 0x60800 +#else +#define MV_XOR_REG_BASE 0x60000 +#define XOR_UNIT_BASE(unit) ((unit)? 0x60900:0x60800) +#endif + +#define TDM_REG_BASE 0xD0000 +#define USB_REG_BASE(dev) 0x50000 +#define AUDIO_REG_BASE 0xA0000 +#define SATA_REG_BASE 0x80000 +#define MV_CESA_REG_BASE 0x3D000 +#define MV_CESA_TDMA_REG_BASE 0x30000 +#define MV_SDIO_REG_BASE 0x90000 +#define MV_ETH_REG_BASE(port) (((port) == 0) ? 0x72000 : 0x76000) +#define MV_UART_CHAN_BASE(chanNum) (0x12000 + (chanNum * 0x100)) +#define DRAM_BASE 0x0 +#define CNTMR_BASE 0x20300 +#define TWSI_SLAVE_BASE(chanNum) 0x11000 +#define PEX_IF_BASE(pexIf) 0x40000 +#define MPP_REG_BASE 0x10000 +#define TSU_GLOBAL_REG_BASE 0xB4000 +#define MAX_AHB_TO_MBUS_REG_BASE 0x20000 + +#define INTER_REGS_SIZE _1M +/* This define describes the TWSI interrupt bit and location */ +#define TWSI_CPU_MAIN_INT_CAUSE_REG 0x20200 +#define TWSI0_CPU_MAIN_INT_BIT (1<<29) +#define TWSI_SPEED 100000 + +#define MV_GPP_MAX_GROUP 2 +#define MV_CNTMR_MAX_COUNTER 2 +#define MV_UART_MAX_CHAN 2 +#define MV_XOR_MAX_UNIT 2 +#define MV_XOR_MAX_CHAN 4 /* total channels for all units together*/ +#define MV_XOR_MAX_CHAN_PER_UNIT 2 /* channels for units */ +#define MV_SATA_MAX_CHAN 2 + +#define MV_6281_MPP_MAX_MODULE 2 +#define MV_6192_MPP_MAX_MODULE 1 +#define MV_6190_MPP_MAX_MODULE 1 +#define MV_6180_MPP_MAX_MODULE 2 +#define MV_6281_MPP_MAX_GROUP 7 +#define MV_6192_MPP_MAX_GROUP 4 +#define MV_6190_MPP_MAX_GROUP 4 +#define MV_6180_MPP_MAX_GROUP 3 + +#define MV_DRAM_MAX_CS 4 + +/* This define describes the maximum number of supported PCI\PCIX Interfaces*/ +#define MV_PCI_MAX_IF 0 +#define MV_PCI_START_IF 0 + +/* This define describes the maximum number of supported PEX Interfaces */ +#define MV_INCLUDE_PEX0 +#define MV_DISABLE_PEX_DEVICE_BAR +#define MV_PEX_MAX_IF 1 +#define MV_PEX_START_IF MV_PCI_MAX_IF + +/* This define describes the maximum number of supported PCI Interfaces */ +#define MV_PCI_IF_MAX_IF (MV_PEX_MAX_IF+MV_PCI_MAX_IF) + +#define MV_ETH_MAX_PORTS 2 +#define MV_6281_ETH_MAX_PORTS 2 +#define MV_6192_ETH_MAX_PORTS 2 +#define MV_6190_ETH_MAX_PORTS 1 +#define MV_6180_ETH_MAX_PORTS 1 + +#define MV_IDMA_MAX_CHAN 0 + +#define MV_USB_MAX_PORTS 1 + +#define MV_USB_VERSION 1 + + +#define MV_6281_NAND 1 +#define MV_6192_NAND 1 +#define MV_6190_NAND 1 +#define MV_6180_NAND 0 + +#define MV_6281_SDIO 1 +#define MV_6192_SDIO 1 +#define MV_6190_SDIO 1 +#define MV_6180_SDIO 1 + +#define MV_6281_TS 1 +#define MV_6192_TS 1 +#define MV_6190_TS 0 +#define MV_6180_TS 0 + +#define MV_6281_AUDIO 1 +#define MV_6192_AUDIO 1 +#define MV_6190_AUDIO 0 +#define MV_6180_AUDIO 1 + +#define MV_6281_TDM 1 +#define MV_6192_TDM 1 +#define MV_6190_TDM 0 +#define MV_6180_TDM 0 + +#define MV_DEVICE_MAX_CS 4 + +/* Others */ +#define PEX_HOST_BUS_NUM(pciIf) (pciIf) +#define PEX_HOST_DEV_NUM(pciIf) 0 + +#define PCI_IO(pciIf) (PEX0_IO) +#define PCI_MEM(pciIf, memNum) (PEX0_MEM0) +/* CESA version #2: One channel, 2KB SRAM, TDMA */ +#if defined(MV_CESA_CHAIN_MODE_SUPPORT) + #define MV_CESA_VERSION 3 +#else +#define MV_CESA_VERSION 2 +#endif +#define MV_CESA_SRAM_SIZE 2*1024 +/* This define describes the maximum number of supported Ethernet ports */ +#define MV_ETH_VERSION 4 +#define MV_ETH_MAX_RXQ 8 +#define MV_ETH_MAX_TXQ 8 +#define MV_ETH_PORT_SGMII { MV_FALSE, MV_FALSE } +/* This define describes the the support of USB */ +#define MV_USB_VERSION 1 + +#define MV_INCLUDE_SDRAM_CS0 +#define MV_INCLUDE_SDRAM_CS1 +#define MV_INCLUDE_SDRAM_CS2 +#define MV_INCLUDE_SDRAM_CS3 + +#define MV_INCLUDE_DEVICE_CS0 +#define MV_INCLUDE_DEVICE_CS1 +#define MV_INCLUDE_DEVICE_CS2 +#define MV_INCLUDE_DEVICE_CS3 + +#define MPP_GROUP_1_TYPE {\ + {0, 0, 0}, /* Reserved for AUTO */ \ + {0x22220000, 0x22222222, 0x2222}, /* TDM */ \ + {0x44440000, 0x00044444, 0x0000}, /* AUDIO */ \ + {0x33330000, 0x33003333, 0x0033}, /* RGMII */ \ + {0x33330000, 0x03333333, 0x0033}, /* GMII */ \ + {0x11110000, 0x11111111, 0x0001}, /* TS */ \ + {0x33330000, 0x33333333, 0x3333} /* MII */ \ +} + +#define MPP_GROUP_2_TYPE {\ + {0, 0, 0}, /* Reserved for AUTO */ \ + {0x22220000, 0x22222222, 0x22}, /* TDM */ \ + {0x44440000, 0x00044444, 0x0}, /* AUDIO */ \ + {0, 0, 0}, /* N_A */ \ + {0, 0, 0}, /* N_A */ \ + {0x11110000, 0x11111111, 0x01} /* TS */ \ +} + +#ifndef MV_ASMLANGUAGE + +/* This enumerator defines the Marvell Units ID */ +typedef enum _mvUnitId +{ + DRAM_UNIT_ID, + PEX_UNIT_ID, + ETH_GIG_UNIT_ID, + USB_UNIT_ID, + IDMA_UNIT_ID, + XOR_UNIT_ID, + SATA_UNIT_ID, + TDM_UNIT_ID, + UART_UNIT_ID, + CESA_UNIT_ID, + SPI_UNIT_ID, + AUDIO_UNIT_ID, + SDIO_UNIT_ID, + TS_UNIT_ID, + MAX_UNITS_ID + +}MV_UNIT_ID; + +#endif + +#endif /* __INCmvCtrlEnvSpech */ diff --git a/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/kw_family/ctrlEnv/sys/mvAhbToMbus.c b/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/kw_family/ctrlEnv/sys/mvAhbToMbus.c new file mode 100644 index 0000000000..d21bb074d2 --- /dev/null +++ b/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/kw_family/ctrlEnv/sys/mvAhbToMbus.c @@ -0,0 +1,1048 @@ +/******************************************************************************* +Copyright (C) Marvell International Ltd. and its affiliates + +This software file (the "File") is owned and distributed by Marvell +International Ltd. and/or its affiliates ("Marvell") under the following +alternative licensing terms. Once you have made an election to distribute the +File under one of the following license alternatives, please (i) delete this +introductory statement regarding license alternatives, (ii) delete the two +license alternatives that you have not elected to use and (iii) preserve the +Marvell copyright notice above. + +******************************************************************************** +Marvell Commercial License Option + +If you received this File from Marvell and you have entered into a commercial +license agreement (a "Commercial License") with Marvell, the File is licensed +to you under the terms of the applicable Commercial License. + +******************************************************************************** +Marvell GPL License Option + +If you received this File from Marvell, you may opt to use, redistribute and/or +modify this File in accordance with the terms and conditions of the General +Public License Version 2, June 1991 (the "GPL License"), a copy of which is +available along with the File in the license.txt file or by writing to the Free +Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or +on the worldwide web at http://www.gnu.org/licenses/gpl.txt. + +THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED +WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY +DISCLAIMED. The GPL License provides additional details about this warranty +disclaimer. +******************************************************************************** +Marvell BSD License Option + +If you received this File from Marvell, you may opt to use, redistribute and/or +modify this File under the following licensing terms. +Redistribution and use in source and binary forms, with or without modification, +are permitted provided that the following conditions are met: + + * Redistributions of source code must retain the above copyright notice, + this list of conditions and the following disclaimer. + + * Redistributions in binary form must reproduce the above copyright + notice, this list of conditions and the following disclaimer in the + documentation and/or other materials provided with the distribution. + + * Neither the name of Marvell nor the names of its contributors may be + used to endorse or promote products derived from this software without + specific prior written permission. + +THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND +ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED +WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE +DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR +ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES +(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; +LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON +ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS +SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + +*******************************************************************************/ + + +/* includes */ +#include "ctrlEnv/sys/mvAhbToMbus.h" +#include "ctrlEnv/mvCtrlEnvAddrDec.h" + +#undef MV_DEBUG +/* defines */ +#ifdef MV_DEBUG + #define DB(x) x +#else + #define DB(x) +#endif + +/* typedefs */ + + +/* CPU address remap registers offsets are inconsecutive. This struct */ +/* describes address remap register offsets */ +typedef struct _ahbToMbusRemapRegOffs +{ + MV_U32 lowRegOffs; /* Low 32-bit remap register offset */ + MV_U32 highRegOffs; /* High 32 bit remap register offset */ +}AHB_TO_MBUS_REMAP_REG_OFFS; + +/* locals */ +static MV_STATUS ahbToMbusRemapRegOffsGet (MV_U32 winNum, + AHB_TO_MBUS_REMAP_REG_OFFS *pRemapRegs); + +/******************************************************************************* +* mvAhbToMbusInit - Initialize Ahb To Mbus Address Map ! +* +* DESCRIPTION: +* +* INPUT: +* None. +* +* OUTPUT: +* None. +* +* RETURN: +* MV_OK laways. +* +*******************************************************************************/ +MV_STATUS mvAhbToMbusInit(void) +{ + return MV_OK; + +} + +/******************************************************************************* +* mvAhbToMbusWinSet - Set CPU-to-peripheral winNum address window +* +* DESCRIPTION: +* This function sets +* address window, also known as address decode window. +* A new address decode window is set for specified winNum address window. +* If address decode window parameter structure enables the window, +* the routine will also enable the winNum window, allowing CPU to access +* the winNum window. +* +* INPUT: +* winNum - Windows number. +* pAddrDecWin - CPU winNum window data structure. +* +* OUTPUT: +* N/A +* +* RETURN: +* MV_OK if CPU winNum window was set correctly, MV_ERROR in case of +* address window overlapps with other active CPU winNum window or +* trying to assign 36bit base address while CPU does not support that. +* The function returns MV_NOT_SUPPORTED, if the winNum is unsupported. +* +*******************************************************************************/ +MV_STATUS mvAhbToMbusWinSet(MV_U32 winNum, MV_AHB_TO_MBUS_DEC_WIN *pAddrDecWin) +{ + MV_TARGET_ATTRIB targetAttribs; + MV_DEC_REGS decRegs; + + /* Parameter checking */ + if (winNum >= MAX_AHB_TO_MBUS_WINS) + { + mvOsPrintf("mvAhbToMbusWinSet: ERR. Invalid winNum %d\n", winNum); + return MV_NOT_SUPPORTED; + } + + + /* read base register*/ + if (winNum != MV_AHB_TO_MBUS_INTREG_WIN) + { + decRegs.baseReg = MV_REG_READ(AHB_TO_MBUS_WIN_BASE_REG(winNum)); + } + else + { + decRegs.baseReg = MV_REG_READ(AHB_TO_MBUS_WIN_INTEREG_REG); + } + + /* check if address is aligned to the size */ + if(MV_IS_NOT_ALIGN(pAddrDecWin->addrWin.baseLow, pAddrDecWin->addrWin.size)) + { + mvOsPrintf("mvAhbToMbusWinSet:Error setting AHB to MBUS window %d to "\ + "target %s.\nAddress 0x%08x is unaligned to size 0x%x.\n", + winNum, + mvCtrlTargetNameGet(pAddrDecWin->target), + pAddrDecWin->addrWin.baseLow, + pAddrDecWin->addrWin.size); + return MV_ERROR; + } + + /* read control register*/ + if (winNum != MV_AHB_TO_MBUS_INTREG_WIN) + { + decRegs.sizeReg = MV_REG_READ(AHB_TO_MBUS_WIN_CTRL_REG(winNum)); + } + + if (MV_OK != mvCtrlAddrDecToReg(&(pAddrDecWin->addrWin),&decRegs)) + { + mvOsPrintf("mvAhbToMbusWinSet:mvCtrlAddrDecToReg Failed\n"); + return MV_ERROR; + } + + /* enable\Disable */ + if (MV_TRUE == pAddrDecWin->enable) + { + decRegs.sizeReg |= ATMWCR_WIN_ENABLE; + } + else + { + decRegs.sizeReg &= ~ATMWCR_WIN_ENABLE; + } + + mvCtrlAttribGet(pAddrDecWin->target,&targetAttribs); + + /* set attributes */ + decRegs.sizeReg &= ~ATMWCR_WIN_ATTR_MASK; + decRegs.sizeReg |= targetAttribs.attrib << ATMWCR_WIN_ATTR_OFFS; + /* set target ID */ + decRegs.sizeReg &= ~ATMWCR_WIN_TARGET_MASK; + decRegs.sizeReg |= targetAttribs.targetId << ATMWCR_WIN_TARGET_OFFS; + +#if !defined(MV_RUN_FROM_FLASH) + /* To be on the safe side we disable the window before writing the */ + /* new values. */ + if (winNum != MV_AHB_TO_MBUS_INTREG_WIN) + { + mvAhbToMbusWinEnable(winNum,MV_FALSE); + } +#endif + + /* 3) Write to address decode Base Address Register */ + if (winNum != MV_AHB_TO_MBUS_INTREG_WIN) + { + MV_REG_WRITE(AHB_TO_MBUS_WIN_BASE_REG(winNum), decRegs.baseReg); + } + else + { + MV_REG_WRITE(AHB_TO_MBUS_WIN_INTEREG_REG, decRegs.baseReg); + } + + + /* Internal register space have no size */ + /* register. Do not perform size register assigment for those targets */ + if (winNum != MV_AHB_TO_MBUS_INTREG_WIN) + { + /* Write to address decode Size Register */ + MV_REG_WRITE(AHB_TO_MBUS_WIN_CTRL_REG(winNum), decRegs.sizeReg); + } + + return MV_OK; +} + +/******************************************************************************* +* mvAhbToMbusWinGet - Get CPU-to-peripheral winNum address window +* +* DESCRIPTION: +* Get the CPU peripheral winNum address window. +* +* INPUT: +* winNum - Peripheral winNum enumerator +* +* OUTPUT: +* pAddrDecWin - CPU winNum window information data structure. +* +* RETURN: +* MV_OK if winNum exist, MV_ERROR otherwise. +* +*******************************************************************************/ +MV_STATUS mvAhbToMbusWinGet(MV_U32 winNum, MV_AHB_TO_MBUS_DEC_WIN *pAddrDecWin) +{ + MV_DEC_REGS decRegs; + MV_TARGET_ATTRIB targetAttrib; + + + /* Parameter checking */ + if (winNum >= MAX_AHB_TO_MBUS_WINS) + { + mvOsPrintf("mvAhbToMbusWinGet: ERR. Invalid winNum %d\n", winNum); + return MV_NOT_SUPPORTED; + } + + + /* Internal register space size have no size register*/ + if (winNum != MV_AHB_TO_MBUS_INTREG_WIN) + { + decRegs.sizeReg = MV_REG_READ(AHB_TO_MBUS_WIN_CTRL_REG(winNum)); + } + else + { + decRegs.sizeReg = 0; + } + + + /* Read base and size */ + if (winNum != MV_AHB_TO_MBUS_INTREG_WIN) + { + decRegs.baseReg = MV_REG_READ(AHB_TO_MBUS_WIN_BASE_REG(winNum)); + } + else + { + decRegs.baseReg = MV_REG_READ(AHB_TO_MBUS_WIN_INTEREG_REG); + } + + + + if (MV_OK != mvCtrlRegToAddrDec(&decRegs,&(pAddrDecWin->addrWin))) + { + mvOsPrintf("mvAhbToMbusWinGet: mvCtrlRegToAddrDec Failed \n"); + return MV_ERROR; + } + + if (winNum == MV_AHB_TO_MBUS_INTREG_WIN) + { + pAddrDecWin->addrWin.size = INTER_REGS_SIZE; + pAddrDecWin->target = INTER_REGS; + pAddrDecWin->enable = MV_TRUE; + + return MV_OK; + } + + + if (decRegs.sizeReg & ATMWCR_WIN_ENABLE) + { + pAddrDecWin->enable = MV_TRUE; + } + else + { + pAddrDecWin->enable = MV_FALSE; + + } + + + + if (-1 == pAddrDecWin->addrWin.size) + { + return MV_ERROR; + } + + /* attrib and targetId */ + targetAttrib.attrib = (decRegs.sizeReg & ATMWCR_WIN_ATTR_MASK) >> + ATMWCR_WIN_ATTR_OFFS; + targetAttrib.targetId = (decRegs.sizeReg & ATMWCR_WIN_TARGET_MASK) >> + ATMWCR_WIN_TARGET_OFFS; + + pAddrDecWin->target = mvCtrlTargetGet(&targetAttrib); + + return MV_OK; +} + +/******************************************************************************* +* mvAhbToMbusWinTargetGet - Get Window number associated with target +* +* DESCRIPTION: +* +* INPUT: +* +* OUTPUT: +* +* RETURN: +* +*******************************************************************************/ +MV_U32 mvAhbToMbusWinTargetGet(MV_TARGET target) +{ + MV_AHB_TO_MBUS_DEC_WIN decWin; + MV_U32 winNum; + + /* Check parameters */ + if (target >= MAX_TARGETS) + { + mvOsPrintf("mvAhbToMbusWinTargetGet: target %d is Illigal\n", target); + return 0xffffffff; + } + + if (INTER_REGS == target) + { + return MV_AHB_TO_MBUS_INTREG_WIN; + } + + for (winNum = 0; winNum < MAX_AHB_TO_MBUS_WINS ; winNum++) + { + if (winNum == MV_AHB_TO_MBUS_INTREG_WIN) + continue; + + if (mvAhbToMbusWinGet(winNum,&decWin) != MV_OK) + { + mvOsPrintf("mvAhbToMbusWinTargetGet: mvAhbToMbusWinGet fail\n"); + return 0xffffffff; + + } + + if (decWin.enable == MV_TRUE) + { + if (decWin.target == target) + { + return winNum; + } + + } + + } + + return 0xFFFFFFFF; + + +} + +/******************************************************************************* +* mvAhbToMbusWinAvailGet - Get First Available window number. +* +* DESCRIPTION: +* +* INPUT: +* +* OUTPUT: +* +* RETURN: +* +*******************************************************************************/ +MV_U32 mvAhbToMbusWinAvailGet(MV_VOID) +{ + MV_AHB_TO_MBUS_DEC_WIN decWin; + MV_U32 winNum; + + for (winNum = 0; winNum < MAX_AHB_TO_MBUS_WINS ; winNum++) + { + if (winNum == MV_AHB_TO_MBUS_INTREG_WIN) + continue; + + if (mvAhbToMbusWinGet(winNum,&decWin) != MV_OK) + { + mvOsPrintf("mvAhbToMbusWinTargetGet: mvAhbToMbusWinGet fail\n"); + return 0xffffffff; + + } + + if (decWin.enable == MV_FALSE) + { + return winNum; + } + + } + + return 0xFFFFFFFF; +} + + +/******************************************************************************* +* mvAhbToMbusWinEnable - Enable/disable a CPU address decode window +* +* DESCRIPTION: +* This function enable/disable a CPU address decode window. +* if parameter 'enable' == MV_TRUE the routine will enable the +* window, thus enabling CPU accesses (before enabling the window it is +* tested for overlapping). Otherwise, the window will be disabled. +* +* INPUT: +* winNum - Peripheral winNum enumerator. +* enable - Enable/disable parameter. +* +* OUTPUT: +* N/A +* +* RETURN: +* MV_ERROR if protection window number was wrong, or the window +* overlapps other winNum window. +* +*******************************************************************************/ +MV_STATUS mvAhbToMbusWinEnable(MV_U32 winNum, MV_BOOL enable) +{ + + /* Parameter checking */ + if (winNum >= MAX_AHB_TO_MBUS_WINS) + { + mvOsPrintf("mvAhbToMbusWinEnable: ERR. Invalid winNum %d\n", winNum); + return MV_NOT_SUPPORTED; + } + + /* Internal registers bar can't be disable or enabled */ + if (winNum == MV_AHB_TO_MBUS_INTREG_WIN) + { + return (enable ? MV_OK : MV_ERROR); + } + + if (enable == MV_TRUE) + { + /* enable the window */ + MV_REG_BIT_SET(AHB_TO_MBUS_WIN_CTRL_REG(winNum), ATMWCR_WIN_ENABLE); + } + else + { /* Disable address decode winNum window */ + MV_REG_BIT_RESET(AHB_TO_MBUS_WIN_CTRL_REG(winNum), ATMWCR_WIN_ENABLE); + } + + return MV_OK; +} + + +/******************************************************************************* +* mvAhbToMbusWinRemap - Set CPU remap register for address windows. +* +* DESCRIPTION: +* After a CPU address hits one of PCI address decode windows there is an +* option to remap the address to a different one. For example, CPU +* executes a read from PCI winNum window address 0x1200.0000. This +* can be modified so the address on the PCI bus would be 0x1400.0000 +* Using the PCI address remap mechanism. +* +* INPUT: +* winNum - Peripheral winNum enumerator. Must be a PCI winNum. +* pAddrDecWin - CPU winNum window information data structure. +* Note that caller has to fill in the base field only. The +* size field is ignored. +* +* OUTPUT: +* None. +* +* RETURN: +* MV_ERROR if winNum is not a PCI one, MV_OK otherwise. +* +*******************************************************************************/ +MV_U32 mvAhbToMbusWinRemap(MV_U32 winNum, MV_ADDR_WIN *pAddrWin) +{ + MV_U32 baseAddr; + AHB_TO_MBUS_REMAP_REG_OFFS remapRegOffs; + + MV_U32 effectiveBaseAddress=0, + baseAddrValue=0,windowSizeValue=0; + + + /* Get registers offsets of given winNum */ + if (MV_NO_SUCH == ahbToMbusRemapRegOffsGet(winNum, &remapRegOffs)) + { + return 0xffffffff; + } + + /* 1) Set address remap low */ + baseAddr = pAddrWin->baseLow; + + /* Check base address aligment */ + /* + if (MV_IS_NOT_ALIGN(baseAddr, ATMWRLR_REMAP_LOW_ALIGNMENT)) + { + mvOsPrintf("mvAhbToMbusPciRemap: Warning. Target base 0x%x unaligned\n", + baseAddr); + return MV_ERROR; + } + */ + + /* BaseLow[31:16] => base register [31:16] */ + baseAddr = baseAddr & ATMWRLR_REMAP_LOW_MASK; + + MV_REG_WRITE(remapRegOffs.lowRegOffs, baseAddr); + + MV_REG_WRITE(remapRegOffs.highRegOffs, pAddrWin->baseHigh); + + + baseAddrValue = MV_REG_READ(AHB_TO_MBUS_WIN_BASE_REG(winNum)); + windowSizeValue = MV_REG_READ(AHB_TO_MBUS_WIN_CTRL_REG(winNum)); + + baseAddrValue &= ATMWBR_BASE_MASK; + windowSizeValue &=ATMWCR_WIN_SIZE_MASK; + + /* Start calculating the effective Base Address */ + effectiveBaseAddress = baseAddrValue ; + + /* The effective base address will be combined from the chopped (if any) + remap value (according to the size value and remap mechanism) and the + window's base address */ + effectiveBaseAddress |= (((windowSizeValue) | 0xffff) & pAddrWin->baseLow); + /* If the effectiveBaseAddress exceed the window boundaries return an + invalid value. */ + + if (effectiveBaseAddress > (baseAddrValue + (windowSizeValue | 0xffff))) + { + mvOsPrintf("mvAhbToMbusPciRemap: Error\n"); + return 0xffffffff; + } + + return effectiveBaseAddress; + + +} +/******************************************************************************* +* mvAhbToMbusWinTargetSwap - Swap AhbToMbus windows between targets +* +* DESCRIPTION: +* +* INPUT: +* target1 - CPU Interface target 1 +* target2 - CPU Interface target 2 +* +* OUTPUT: +* None. +* +* RETURN: +* MV_ERROR if targets are illigal, or if one of the targets is not +* associated to a valid window . +* MV_OK otherwise. +* +*******************************************************************************/ + + +MV_STATUS mvAhbToMbusWinTargetSwap(MV_TARGET target1,MV_TARGET target2) +{ + MV_U32 winNum1,winNum2; + MV_AHB_TO_MBUS_DEC_WIN winDec1,winDec2,winDecTemp; + AHB_TO_MBUS_REMAP_REG_OFFS remapRegs1,remapRegs2; + MV_U32 remapBaseLow1=0,remapBaseLow2=0; + MV_U32 remapBaseHigh1=0,remapBaseHigh2=0; + + + /* Check parameters */ + if (target1 >= MAX_TARGETS) + { + mvOsPrintf("mvAhbToMbusWinTargetSwap: target %d is Illigal\n", target1); + return MV_ERROR; + } + + if (target2 >= MAX_TARGETS) + { + mvOsPrintf("mvAhbToMbusWinTargetSwap: target %d is Illigal\n", target1); + return MV_ERROR; + } + + + /* get window associated with this target */ + winNum1 = mvAhbToMbusWinTargetGet(target1); + + if (winNum1 == 0xffffffff) + { + mvOsPrintf("mvAhbToMbusWinTargetSwap: target %d has illigal win %d\n", + target1,winNum1); + return MV_ERROR; + + } + + /* get window associated with this target */ + winNum2 = mvAhbToMbusWinTargetGet(target2); + + if (winNum2 == 0xffffffff) + { + mvOsPrintf("mvAhbToMbusWinTargetSwap: target %d has illigal win %d\n", + target2,winNum2); + return MV_ERROR; + + } + + /* now Get original values of both Windows */ + if (MV_OK != mvAhbToMbusWinGet(winNum1,&winDec1)) + { + mvOsPrintf("mvAhbToMbusWinTargetSwap: mvAhbToMbusWinGet failed win %d\n", + winNum1); + return MV_ERROR; + + } + if (MV_OK != mvAhbToMbusWinGet(winNum2,&winDec2)) + { + mvOsPrintf("mvAhbToMbusWinTargetSwap: mvAhbToMbusWinGet failed win %d\n", + winNum2); + return MV_ERROR; + + } + + + /* disable both windows */ + if (MV_OK != mvAhbToMbusWinEnable(winNum1,MV_FALSE)) + { + mvOsPrintf("mvAhbToMbusWinTargetSwap: failed to enable window %d\n", + winNum1); + return MV_ERROR; + + } + if (MV_OK != mvAhbToMbusWinEnable(winNum2,MV_FALSE)) + { + mvOsPrintf("mvAhbToMbusWinTargetSwap: failed to enable windo %d\n", + winNum2); + return MV_ERROR; + + } + + + /* now swap targets */ + + /* first save winDec2 values */ + winDecTemp.addrWin.baseHigh = winDec2.addrWin.baseHigh; + winDecTemp.addrWin.baseLow = winDec2.addrWin.baseLow; + winDecTemp.addrWin.size = winDec2.addrWin.size; + winDecTemp.enable = winDec2.enable; + winDecTemp.target = winDec2.target; + + /* winDec2 = winDec1 */ + winDec2.addrWin.baseHigh = winDec1.addrWin.baseHigh; + winDec2.addrWin.baseLow = winDec1.addrWin.baseLow; + winDec2.addrWin.size = winDec1.addrWin.size; + winDec2.enable = winDec1.enable; + winDec2.target = winDec1.target; + + + /* winDec1 = winDecTemp */ + winDec1.addrWin.baseHigh = winDecTemp.addrWin.baseHigh; + winDec1.addrWin.baseLow = winDecTemp.addrWin.baseLow; + winDec1.addrWin.size = winDecTemp.addrWin.size; + winDec1.enable = winDecTemp.enable; + winDec1.target = winDecTemp.target; + + + /* now set the new values */ + + + mvAhbToMbusWinSet(winNum1,&winDec1); + mvAhbToMbusWinSet(winNum2,&winDec2); + + + + + + /* now we will treat the remap windows if exist */ + + + /* now check if one or both windows has a remap window + as well after the swap ! */ + + /* if a window had a remap value differnt than the base value + before the swap , then after the swap the remap value will be + equal to the base value unless both windows has a remap windows*/ + + /* first get old values */ + if (MV_NO_SUCH != ahbToMbusRemapRegOffsGet(winNum1,&remapRegs1)) + { + remapBaseLow1 = MV_REG_READ(remapRegs1.lowRegOffs); + remapBaseHigh1 = MV_REG_READ(remapRegs1.highRegOffs); + + } + if (MV_NO_SUCH != ahbToMbusRemapRegOffsGet(winNum2,&remapRegs2)) + { + remapBaseLow2 = MV_REG_READ(remapRegs2.lowRegOffs); + remapBaseHigh2 = MV_REG_READ(remapRegs2.highRegOffs); + + + } + + /* now do the swap */ + if (MV_NO_SUCH != ahbToMbusRemapRegOffsGet(winNum1,&remapRegs1)) + { + if (MV_NO_SUCH != ahbToMbusRemapRegOffsGet(winNum2,&remapRegs2)) + { + /* Two windows has a remap !!! so swap */ + + MV_REG_WRITE(remapRegs2.highRegOffs,remapBaseHigh1); + MV_REG_WRITE(remapRegs2.lowRegOffs,remapBaseLow1); + + MV_REG_WRITE(remapRegs1.highRegOffs,remapBaseHigh2); + MV_REG_WRITE(remapRegs1.lowRegOffs,remapBaseLow2); + + + + } + else + { + /* remap == base */ + MV_REG_WRITE(remapRegs1.highRegOffs,winDec1.addrWin.baseHigh); + MV_REG_WRITE(remapRegs1.lowRegOffs,winDec1.addrWin.baseLow); + + } + + } + else if (MV_NO_SUCH != ahbToMbusRemapRegOffsGet(winNum2,&remapRegs2)) + { + /* remap == base */ + MV_REG_WRITE(remapRegs2.highRegOffs,winDec2.addrWin.baseHigh); + MV_REG_WRITE(remapRegs2.lowRegOffs,winDec2.addrWin.baseLow); + + } + + + + return MV_OK; + + +} + + + +#if defined(MV_88F1181) + +/******************************************************************************* +* mvAhbToMbusXbarCtrlSet - Set The CPU master Xbar arbitration. +* +* DESCRIPTION: +* This function sets CPU Mbus Arbiter +* +* INPUT: +* pPizzaArbArray - A priority Structure describing 16 "pizza slices". At +* each clock cycle, the crossbar arbiter samples all +* requests and gives the bus to the next agent according +* to the "pizza". +* +* OUTPUT: +* N/A +* +* RETURN: +* MV_ERROR if paramers to function invalid. +* +*******************************************************************************/ +MV_STATUS mvMbusArbSet(MV_MBUS_ARB_TARGET *pPizzaArbArray) +{ + MV_U32 sliceNum; + MV_U32 xbarCtrl = 0; + MV_MBUS_ARB_TARGET xbarTarget; + + /* 1) Set crossbar control low register */ + for (sliceNum = 0; sliceNum < MRLR_SLICE_NUM; sliceNum++) + { + xbarTarget = pPizzaArbArray[sliceNum]; + + /* sliceNum parameter check */ + if (xbarTarget > MAX_MBUS_ARB_TARGETS) + { + mvOsPrintf("mvAhbToMbusXbarCtrlSet: ERR. Can't set Target %d\n", + xbarTarget); + return MV_ERROR; + } + xbarCtrl |= (xbarTarget << MRLR_LOW_ARB_OFFS(sliceNum)); + } + /* Write to crossbar control low register */ + MV_REG_WRITE(MBUS_ARBITER_LOW_REG, xbarCtrl); + + xbarCtrl = 0; + + /* 2) Set crossbar control high register */ + for (sliceNum = MRLR_SLICE_NUM; + sliceNum < MRLR_SLICE_NUM+MRHR_SLICE_NUM; + sliceNum++) + { + + xbarTarget = pPizzaArbArray[sliceNum]; + + /* sliceNum parameter check */ + if (xbarTarget > MAX_MBUS_ARB_TARGETS) + { + mvOsPrintf("mvAhbToMbusXbarCtrlSet: ERR. Can't set Target %d\n", + xbarTarget); + return MV_ERROR; + } + xbarCtrl |= (xbarTarget << MRHR_HIGH_ARB_OFFS(sliceNum)); + } + /* Write to crossbar control high register */ + MV_REG_WRITE(MBUS_ARBITER_HIGH_REG, xbarCtrl); + + return MV_OK; +} + +/******************************************************************************* +* mvMbusArbCtrlSet - Set MBus Arbiter control register +* +* DESCRIPTION: +* +* INPUT: +* ctrl - pointer to MV_MBUS_ARB_CTRL register +* +* OUTPUT: +* N/A +* +* RETURN: +* MV_ERROR if paramers to function invalid. +* +*******************************************************************************/ +MV_STATUS mvMbusArbCtrlSet(MV_MBUS_ARB_CTRL *ctrl) +{ + + if (ctrl->highPrio == MV_FALSE) + { + MV_REG_BIT_RESET(MBUS_ARBITER_CTRL_REG, MACR_ARB_ARM_TOP); + } + else + { + MV_REG_BIT_SET(MBUS_ARBITER_CTRL_REG, MACR_ARB_ARM_TOP); + } + + if (ctrl->fixedRoundRobin == MV_FALSE) + { + MV_REG_BIT_RESET(MBUS_ARBITER_CTRL_REG, MACR_ARB_TARGET_FIXED); + } + else + { + MV_REG_BIT_SET(MBUS_ARBITER_CTRL_REG, MACR_ARB_TARGET_FIXED); + } + + if (ctrl->starvEn == MV_FALSE) + { + MV_REG_BIT_RESET(MBUS_ARBITER_CTRL_REG, MACR_ARB_REQ_CTRL_EN); + } + else + { + MV_REG_BIT_SET(MBUS_ARBITER_CTRL_REG, MACR_ARB_REQ_CTRL_EN); + } + + return MV_OK; +} + +/******************************************************************************* +* mvMbusArbCtrlGet - Get MBus Arbiter control register +* +* DESCRIPTION: +* +* INPUT: +* ctrl - pointer to MV_MBUS_ARB_CTRL register +* +* OUTPUT: +* ctrl - pointer to MV_MBUS_ARB_CTRL register +* +* RETURN: +* MV_ERROR if paramers to function invalid. +* +*******************************************************************************/ +MV_STATUS mvMbusArbCtrlGet(MV_MBUS_ARB_CTRL *ctrl) +{ + + MV_U32 ctrlReg = MV_REG_READ(MBUS_ARBITER_CTRL_REG); + + if (ctrlReg & MACR_ARB_ARM_TOP) + { + ctrl->highPrio = MV_TRUE; + } + else + { + ctrl->highPrio = MV_FALSE; + } + + if (ctrlReg & MACR_ARB_TARGET_FIXED) + { + ctrl->fixedRoundRobin = MV_TRUE; + } + else + { + ctrl->fixedRoundRobin = MV_FALSE; + } + + if (ctrlReg & MACR_ARB_REQ_CTRL_EN) + { + ctrl->starvEn = MV_TRUE; + } + else + { + ctrl->starvEn = MV_FALSE; + } + + + return MV_OK; +} + +#endif /* #if defined(MV_88F1181) */ + + + +/******************************************************************************* +* ahbToMbusRemapRegOffsGet - Get CPU address remap register offsets +* +* DESCRIPTION: +* CPU to PCI address remap registers offsets are inconsecutive. +* This function returns PCI address remap registers offsets. +* +* INPUT: +* winNum - Address decode window number. See MV_U32 enumerator. +* +* OUTPUT: +* None. +* +* RETURN: +* MV_ERROR if winNum is not a PCI one. +* +*******************************************************************************/ +static MV_STATUS ahbToMbusRemapRegOffsGet(MV_U32 winNum, + AHB_TO_MBUS_REMAP_REG_OFFS *pRemapRegs) +{ + switch (winNum) + { + case 0: + case 1: + pRemapRegs->lowRegOffs = AHB_TO_MBUS_WIN_REMAP_LOW_REG(winNum); + pRemapRegs->highRegOffs = AHB_TO_MBUS_WIN_REMAP_HIGH_REG(winNum); + break; + case 2: + case 3: + if((mvCtrlModelGet() == MV_5281_DEV_ID) || + (mvCtrlModelGet() == MV_1281_DEV_ID) || + (mvCtrlModelGet() == MV_6183_DEV_ID) || + (mvCtrlModelGet() == MV_6183L_DEV_ID)) + { + pRemapRegs->lowRegOffs = AHB_TO_MBUS_WIN_REMAP_LOW_REG(winNum); + pRemapRegs->highRegOffs = AHB_TO_MBUS_WIN_REMAP_HIGH_REG(winNum); + break; + } + else + { + pRemapRegs->lowRegOffs = 0; + pRemapRegs->highRegOffs = 0; + + DB(mvOsPrintf("ahbToMbusRemapRegOffsGet: ERR. Invalid winNum %d\n", + winNum)); + return MV_NO_SUCH; + } + default: + { + pRemapRegs->lowRegOffs = 0; + pRemapRegs->highRegOffs = 0; + + DB(mvOsPrintf("ahbToMbusRemapRegOffsGet: ERR. Invalid winNum %d\n", + winNum)); + return MV_NO_SUCH; + } + } + + return MV_OK; +} + +/******************************************************************************* +* mvAhbToMbusAddDecShow - Print the AHB to MBus bridge address decode map. +* +* DESCRIPTION: +* This function print the CPU address decode map. +* +* INPUT: +* None. +* +* OUTPUT: +* None. +* +* RETURN: +* None. +* +*******************************************************************************/ +MV_VOID mvAhbToMbusAddDecShow(MV_VOID) +{ + MV_AHB_TO_MBUS_DEC_WIN win; + MV_U32 winNum; + mvOsOutput( "\n" ); + mvOsOutput( "AHB To MBUS Bridge:\n" ); + mvOsOutput( "-------------------\n" ); + + for( winNum = 0; winNum < MAX_AHB_TO_MBUS_WINS; winNum++ ) + { + memset( &win, 0, sizeof(MV_AHB_TO_MBUS_DEC_WIN) ); + + mvOsOutput( "win%d - ", winNum ); + + if( mvAhbToMbusWinGet( winNum, &win ) == MV_OK ) + { + if( win.enable ) + { + mvOsOutput( "%s base %08x, ", + mvCtrlTargetNameGet(win.target), win.addrWin.baseLow ); + mvOsOutput( "...." ); + mvSizePrint( win.addrWin.size ); + + mvOsOutput( "\n" ); + + } + else + mvOsOutput( "disable\n" ); + } + } + +} + diff --git a/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/kw_family/ctrlEnv/sys/mvAhbToMbus.h b/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/kw_family/ctrlEnv/sys/mvAhbToMbus.h new file mode 100644 index 0000000000..1b352a1f6b --- /dev/null +++ b/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/kw_family/ctrlEnv/sys/mvAhbToMbus.h @@ -0,0 +1,130 @@ +/******************************************************************************* +Copyright (C) Marvell International Ltd. and its affiliates + +This software file (the "File") is owned and distributed by Marvell +International Ltd. and/or its affiliates ("Marvell") under the following +alternative licensing terms. Once you have made an election to distribute the +File under one of the following license alternatives, please (i) delete this +introductory statement regarding license alternatives, (ii) delete the two +license alternatives that you have not elected to use and (iii) preserve the +Marvell copyright notice above. + +******************************************************************************** +Marvell Commercial License Option + +If you received this File from Marvell and you have entered into a commercial +license agreement (a "Commercial License") with Marvell, the File is licensed +to you under the terms of the applicable Commercial License. + +******************************************************************************** +Marvell GPL License Option + +If you received this File from Marvell, you may opt to use, redistribute and/or +modify this File in accordance with the terms and conditions of the General +Public License Version 2, June 1991 (the "GPL License"), a copy of which is +available along with the File in the license.txt file or by writing to the Free +Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or +on the worldwide web at http://www.gnu.org/licenses/gpl.txt. + +THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED +WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY +DISCLAIMED. The GPL License provides additional details about this warranty +disclaimer. +******************************************************************************** +Marvell BSD License Option + +If you received this File from Marvell, you may opt to use, redistribute and/or +modify this File under the following licensing terms. +Redistribution and use in source and binary forms, with or without modification, +are permitted provided that the following conditions are met: + + * Redistributions of source code must retain the above copyright notice, + this list of conditions and the following disclaimer. + + * Redistributions in binary form must reproduce the above copyright + notice, this list of conditions and the following disclaimer in the + documentation and/or other materials provided with the distribution. + + * Neither the name of Marvell nor the names of its contributors may be + used to endorse or promote products derived from this software without + specific prior written permission. + +THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND +ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED +WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE +DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR +ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES +(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; +LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON +ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS +SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + +*******************************************************************************/ + + +#ifndef __INCmvAhbToMbush +#define __INCmvAhbToMbush + +/* includes */ +#include "ctrlEnv/mvCtrlEnvLib.h" +#include "ctrlEnv/sys/mvAhbToMbusRegs.h" +#include "ctrlEnv/mvCtrlEnvAddrDec.h" + +/* defines */ + +#if defined(MV_88F1181) +/* This enumerator defines the Marvell controller possible MBUS arbiter */ +/* target ports. It is used to define crossbar priority scheame (pizza) */ +typedef enum _mvMBusArbTargetId +{ + DRAM_MBUS_ARB_TARGET = 0, /* Port 0 -> DRAM interface */ + TWSI_MBUS_ARB_TARGET = 1, /* Port 1 -> TWSI */ + ARM_MBUS_ARB_TARGET = 2, /* Port 2 -> ARM */ + PEX1_MBUS_ARB_TARGET = 3, /* Port 3 -> PCI Express 1 */ + PEX0_MBUS_ARB_TARGET = 4, /* Port 4 -> PCI Express0 */ + MAX_MBUS_ARB_TARGETS +}MV_MBUS_ARB_TARGET; + +typedef struct _mvMBusArbCtrl +{ + MV_BOOL starvEn; + MV_BOOL highPrio; + MV_BOOL fixedRoundRobin; + +}MV_MBUS_ARB_CTRL; + +#endif /* #if defined(MV_88F1181) */ + +typedef struct _mvAhbtoMbusDecWin +{ + MV_TARGET target; + MV_ADDR_WIN addrWin; /* An address window*/ + MV_BOOL enable; /* Address decode window is enabled/disabled */ + +}MV_AHB_TO_MBUS_DEC_WIN; + +/* mvAhbToMbus.h API list */ + +MV_STATUS mvAhbToMbusInit(MV_VOID); +MV_STATUS mvAhbToMbusWinSet(MV_U32 winNum, MV_AHB_TO_MBUS_DEC_WIN *pAddrDecWin); +MV_STATUS mvAhbToMbusWinGet(MV_U32 winNum, MV_AHB_TO_MBUS_DEC_WIN *pAddrDecWin); +MV_STATUS mvAhbToMbusWinEnable(MV_U32 winNum,MV_BOOL enable); +MV_U32 mvAhbToMbusWinRemap(MV_U32 winNum, MV_ADDR_WIN *pAddrDecWin); +MV_U32 mvAhbToMbusWinTargetGet(MV_TARGET target); +MV_U32 mvAhbToMbusWinAvailGet(MV_VOID); +MV_STATUS mvAhbToMbusWinTargetSwap(MV_TARGET target1,MV_TARGET target2); + +#if defined(MV_88F1181) + +MV_STATUS mvMbusArbSet(MV_MBUS_ARB_TARGET *pPizzaArbArray); +MV_STATUS mvMbusArbCtrlSet(MV_MBUS_ARB_CTRL *ctrl); +MV_STATUS mvMbusArbCtrlGet(MV_MBUS_ARB_CTRL *ctrl); + +#endif /* #if defined(MV_88F1181) */ + + +MV_VOID mvAhbToMbusAddDecShow(MV_VOID); + + +#endif /* __INCmvAhbToMbush */ diff --git a/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/kw_family/ctrlEnv/sys/mvAhbToMbusRegs.h b/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/kw_family/ctrlEnv/sys/mvAhbToMbusRegs.h new file mode 100644 index 0000000000..97dc631890 --- /dev/null +++ b/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/kw_family/ctrlEnv/sys/mvAhbToMbusRegs.h @@ -0,0 +1,143 @@ +/******************************************************************************* +Copyright (C) Marvell International Ltd. and its affiliates + +This software file (the "File") is owned and distributed by Marvell +International Ltd. and/or its affiliates ("Marvell") under the following +alternative licensing terms. Once you have made an election to distribute the +File under one of the following license alternatives, please (i) delete this +introductory statement regarding license alternatives, (ii) delete the two +license alternatives that you have not elected to use and (iii) preserve the +Marvell copyright notice above. + +******************************************************************************** +Marvell Commercial License Option + +If you received this File from Marvell and you have entered into a commercial +license agreement (a "Commercial License") with Marvell, the File is licensed +to you under the terms of the applicable Commercial License. + +******************************************************************************** +Marvell GPL License Option + +If you received this File from Marvell, you may opt to use, redistribute and/or +modify this File in accordance with the terms and conditions of the General +Public License Version 2, June 1991 (the "GPL License"), a copy of which is +available along with the File in the license.txt file or by writing to the Free +Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or +on the worldwide web at http://www.gnu.org/licenses/gpl.txt. + +THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED +WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY +DISCLAIMED. The GPL License provides additional details about this warranty +disclaimer. +******************************************************************************** +Marvell BSD License Option + +If you received this File from Marvell, you may opt to use, redistribute and/or +modify this File under the following licensing terms. +Redistribution and use in source and binary forms, with or without modification, +are permitted provided that the following conditions are met: + + * Redistributions of source code must retain the above copyright notice, + this list of conditions and the following disclaimer. + + * Redistributions in binary form must reproduce the above copyright + notice, this list of conditions and the following disclaimer in the + documentation and/or other materials provided with the distribution. + + * Neither the name of Marvell nor the names of its contributors may be + used to endorse or promote products derived from this software without + specific prior written permission. + +THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND +ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED +WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE +DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR +ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES +(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; +LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON +ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS +SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + +*******************************************************************************/ + + +#ifndef __INCmvAhbToMbusRegsh +#define __INCmvAhbToMbusRegsh + +/******************************/ +/* ARM Address Map Registers */ +/******************************/ + +#define MAX_AHB_TO_MBUS_WINS 9 +#define MV_AHB_TO_MBUS_INTREG_WIN 8 + + +#define AHB_TO_MBUS_WIN_CTRL_REG(winNum) (0x20000 + (winNum)*0x10) +#define AHB_TO_MBUS_WIN_BASE_REG(winNum) (0x20004 + (winNum)*0x10) +#define AHB_TO_MBUS_WIN_REMAP_LOW_REG(winNum) (0x20008 + (winNum)*0x10) +#define AHB_TO_MBUS_WIN_REMAP_HIGH_REG(winNum) (0x2000C + (winNum)*0x10) +#define AHB_TO_MBUS_WIN_INTEREG_REG 0x20080 + +/* Window Control Register */ +/* AHB_TO_MBUS_WIN_CTRL_REG (ATMWCR)*/ +#define ATMWCR_WIN_ENABLE BIT0 /* Window Enable */ + +#define ATMWCR_WIN_TARGET_OFFS 4 /* The target interface associated + with this window*/ +#define ATMWCR_WIN_TARGET_MASK (0xf << ATMWCR_WIN_TARGET_OFFS) + +#define ATMWCR_WIN_ATTR_OFFS 8 /* The target interface attributes + Associated with this window */ +#define ATMWCR_WIN_ATTR_MASK (0xff << ATMWCR_WIN_ATTR_OFFS) + + +/* +Used with the Base register to set the address window size and location +Must be programed from LSB to MSB as sequence of 1Â’s followed +by sequence of 0Â’s. The number of 1Â’s specifies the size of the window +in 64 KB granularity (e.g. a value of 0x00FF specifies 256 = 16 MB). + +NOTE: A value of 0x0 specifies 64KB size. +*/ +#define ATMWCR_WIN_SIZE_OFFS 16 /* Window Size */ +#define ATMWCR_WIN_SIZE_MASK (0xffff << ATMWCR_WIN_SIZE_OFFS) +#define ATMWCR_WIN_SIZE_ALIGNMENT 0x10000 + +/* Window Base Register */ +/* AHB_TO_MBUS_WIN_BASE_REG (ATMWBR) */ + +/* +Used with the size field to set the address window size and location. +Corresponds to transaction address[31:16] +*/ +#define ATMWBR_BASE_OFFS 16 /* Base Address */ +#define ATMWBR_BASE_MASK (0xffff << ATMWBR_BASE_OFFS) +#define ATMWBR_BASE_ALIGNMENT 0x10000 + +/* Window Remap Low Register */ +/* AHB_TO_MBUS_WIN_REMAP_LOW_REG (ATMWRLR) */ + +/* +Used with the size field to specifies address bits[31:0] to be driven to +the target interface.: +target_addr[31:16] = (addr[31:16] & size[15:0]) | (remap[31:16] & ~size[15:0]) +*/ +#define ATMWRLR_REMAP_LOW_OFFS 16 /* Remap Address */ +#define ATMWRLR_REMAP_LOW_MASK (0xffff << ATMWRLR_REMAP_LOW_OFFS) +#define ATMWRLR_REMAP_LOW_ALIGNMENT 0x10000 + +/* Window Remap High Register */ +/* AHB_TO_MBUS_WIN_REMAP_HIGH_REG (ATMWRHR) */ + +/* +Specifies address bits[63:32] to be driven to the target interface. +target_addr[63:32] = (RemapHigh[31:0] +*/ +#define ATMWRHR_REMAP_HIGH_OFFS 0 /* Remap Address */ +#define ATMWRHR_REMAP_HIGH_MASK (0xffffffff << ATMWRHR_REMAP_HIGH_OFFS) + + +#endif /* __INCmvAhbToMbusRegsh */ + diff --git a/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/kw_family/ctrlEnv/sys/mvCpuIf.c b/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/kw_family/ctrlEnv/sys/mvCpuIf.c new file mode 100644 index 0000000000..872dc6e9d8 --- /dev/null +++ b/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/kw_family/ctrlEnv/sys/mvCpuIf.c @@ -0,0 +1,1036 @@ +/******************************************************************************* +Copyright (C) Marvell International Ltd. and its affiliates + +This software file (the "File") is owned and distributed by Marvell +International Ltd. and/or its affiliates ("Marvell") under the following +alternative licensing terms. Once you have made an election to distribute the +File under one of the following license alternatives, please (i) delete this +introductory statement regarding license alternatives, (ii) delete the two +license alternatives that you have not elected to use and (iii) preserve the +Marvell copyright notice above. + +******************************************************************************** +Marvell Commercial License Option + +If you received this File from Marvell and you have entered into a commercial +license agreement (a "Commercial License") with Marvell, the File is licensed +to you under the terms of the applicable Commercial License. + +******************************************************************************** +Marvell GPL License Option + +If you received this File from Marvell, you may opt to use, redistribute and/or +modify this File in accordance with the terms and conditions of the General +Public License Version 2, June 1991 (the "GPL License"), a copy of which is +available along with the File in the license.txt file or by writing to the Free +Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or +on the worldwide web at http://www.gnu.org/licenses/gpl.txt. + +THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED +WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY +DISCLAIMED. The GPL License provides additional details about this warranty +disclaimer. +******************************************************************************** +Marvell BSD License Option + +If you received this File from Marvell, you may opt to use, redistribute and/or +modify this File under the following licensing terms. +Redistribution and use in source and binary forms, with or without modification, +are permitted provided that the following conditions are met: + + * Redistributions of source code must retain the above copyright notice, + this list of conditions and the following disclaimer. + + * Redistributions in binary form must reproduce the above copyright + notice, this list of conditions and the following disclaimer in the + documentation and/or other materials provided with the distribution. + + * Neither the name of Marvell nor the names of its contributors may be + used to endorse or promote products derived from this software without + specific prior written permission. + +THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND +ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED +WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE +DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR +ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES +(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; +LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON +ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS +SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + +*******************************************************************************/ + + +/* includes */ +#include "ctrlEnv/sys/mvCpuIf.h" +#include "ctrlEnv/sys/mvAhbToMbusRegs.h" +#include "cpu/mvCpu.h" +#include "ctrlEnv/mvCtrlEnvLib.h" +#include "mvSysHwConfig.h" +#include "mvSysDram.h" + +/*#define MV_DEBUG*/ +/* defines */ + +#ifdef MV_DEBUG + #define DB(x) x +#else + #define DB(x) +#endif + +/* locals */ +/* static functions */ +static MV_BOOL cpuTargetWinOverlap(MV_TARGET target, MV_ADDR_WIN *pAddrWin); + +MV_TARGET * sampleAtResetTargetArray; +MV_TARGET sampleAtResetTargetArrayP[] = BOOT_TARGETS_NAME_ARRAY; +MV_TARGET sampleAtResetTargetArray6180P[] = BOOT_TARGETS_NAME_ARRAY_6180; +/******************************************************************************* +* mvCpuIfInit - Initialize Controller CPU interface +* +* DESCRIPTION: +* This function initialize Controller CPU interface: +* 1. Set CPU interface configuration registers. +* 2. Set CPU master Pizza arbiter control according to static +* configuration described in configuration file. +* 3. Opens CPU address decode windows. DRAM windows are assumed to be +* already set (auto detection). +* +* INPUT: +* None. +* +* OUTPUT: +* None. +* +* RETURN: +* None. +* +*******************************************************************************/ +MV_STATUS mvCpuIfInit(MV_CPU_DEC_WIN *cpuAddrWinMap) +{ + MV_U32 regVal; + MV_TARGET target; + MV_ADDR_WIN addrWin; + + if (cpuAddrWinMap == NULL) + { + DB(mvOsPrintf("mvCpuIfInit:ERR. cpuAddrWinMap == NULL\n")); + return MV_ERROR; + } + + /*Initialize the boot target array according to device type*/ + if(mvCtrlModelGet() == MV_6180_DEV_ID) + sampleAtResetTargetArray = sampleAtResetTargetArray6180P; + else + sampleAtResetTargetArray = sampleAtResetTargetArrayP; + + /* Set ARM Configuration register */ + regVal = MV_REG_READ(CPU_CONFIG_REG); + regVal &= ~CPU_CONFIG_DEFAULT_MASK; + regVal |= CPU_CONFIG_DEFAULT; + MV_REG_WRITE(CPU_CONFIG_REG,regVal); + + /* First disable all CPU target windows */ + for (target = 0; cpuAddrWinMap[target].enable != TBL_TERM; target++) + { + if ((MV_TARGET_IS_DRAM(target))||(target == INTER_REGS)) + { + continue; + } + +#if defined(MV_MEM_OVER_PCI_WA) || defined(MV_UART_OVER_PCI_WA) + /* If the target PEX or PCI and memory is over PEX or PCI we don't touch this CPU windows */ + if (MV_TARGET_IS_PCI(target)) + { + continue; + } +#endif + +#if defined(MV_MEM_OVER_PEX_WA) || defined(MV_UART_OVER_PEX_WA) + /* If the target PEX or PCI and memory is over PEX or PCI we don't touch this CPU windows */ + if (MV_TARGET_IS_PEX(target)) + { + continue; + } +#endif +#if defined(MV_RUN_FROM_FLASH) + /* Don't disable the boot device. */ + if (target == DEV_BOOCS) + { + continue; + } +#endif /* MV_RUN_FROM_FLASH */ + mvCpuIfTargetWinEnable(MV_CHANGE_BOOT_CS(target),MV_FALSE); + } + +#if defined(MV_RUN_FROM_FLASH) + /* Resize the bootcs windows before other windows, because this */ + /* window is enabled and will cause an overlap if not resized. */ + target = DEV_BOOCS; + + if (MV_OK != mvCpuIfTargetWinSet(target, &cpuAddrWinMap[target])) + { + DB(mvOsPrintf("mvCpuIfInit:ERR. mvCpuIfTargetWinSet fail\n")); + return MV_ERROR; + } + + addrWin.baseLow = cpuAddrWinMap[target].addrWin.baseLow; + addrWin.baseHigh = cpuAddrWinMap[target].addrWin.baseHigh; + if (0xffffffff == mvAhbToMbusWinRemap(cpuAddrWinMap[target].winNum ,&addrWin)) + { + DB(mvOsPrintf("mvCpuIfInit:WARN. mvAhbToMbusWinRemap can't remap winNum=%d\n", + cpuAddrWinMap[target].winNum)); + } + +#endif /* MV_RUN_FROM_FLASH */ + + /* Go through all targets in user table until table terminator */ + for (target = 0; cpuAddrWinMap[target].enable != TBL_TERM; target++) + { + +#if defined(MV_RUN_FROM_FLASH) + if (target == DEV_BOOCS) + { + continue; + } +#endif /* MV_RUN_FROM_FLASH */ + + /* if DRAM auto sizing is used do not initialized DRAM target windows, */ + /* assuming this already has been done earlier. */ +#ifdef MV_DRAM_AUTO_SIZE + if (MV_TARGET_IS_DRAM(target)) + { + continue; + } +#endif + +#if defined(MV_MEM_OVER_PCI_WA) || defined(MV_UART_OVER_PCI_WA) + /* If the target PEX or PCI and memory is over PEX or PCI we don't touch this CPU windows */ + if (MV_TARGET_IS_PCI(target)) + { + continue; + } +#endif + +#if defined(MV_MEM_OVER_PEX_WA) || defined(MV_UART_OVER_PEX_WA) + /* If the target PEX or PCI and memory is over PEX or PCI we don't touch this CPU windows */ + if (MV_TARGET_IS_PEX(target)) + { + continue; + } +#endif + /* If the target attribute is the same as the boot device attribute */ + /* then it's stays disable */ + if (MV_TARGET_IS_AS_BOOT(target)) + { + continue; + } + + if((0 == cpuAddrWinMap[target].addrWin.size) || + (DIS == cpuAddrWinMap[target].enable)) + + { + if (MV_OK != mvCpuIfTargetWinEnable(target, MV_FALSE)) + { + DB(mvOsPrintf("mvCpuIfInit:ERR. mvCpuIfTargetWinEnable fail\n")); + return MV_ERROR; + } + + } + else + { + if (MV_OK != mvCpuIfTargetWinSet(target, &cpuAddrWinMap[target])) + { + DB(mvOsPrintf("mvCpuIfInit:ERR. mvCpuIfTargetWinSet fail\n")); + return MV_ERROR; + } + + addrWin.baseLow = cpuAddrWinMap[target].addrWin.baseLow; + addrWin.baseHigh = cpuAddrWinMap[target].addrWin.baseHigh; + if (0xffffffff == mvAhbToMbusWinRemap(cpuAddrWinMap[target].winNum ,&addrWin)) + { + DB(mvOsPrintf("mvCpuIfInit:WARN. mvAhbToMbusWinRemap can't remap winNum=%d\n", + cpuAddrWinMap[target].winNum)); + } + + + } + } + + return MV_OK; + + +} + + +/******************************************************************************* +* mvCpuIfTargetWinSet - Set CPU-to-peripheral target address window +* +* DESCRIPTION: +* This function sets a peripheral target (e.g. SDRAM bank0, PCI0_MEM0) +* address window, also known as address decode window. +* A new address decode window is set for specified target address window. +* If address decode window parameter structure enables the window, +* the routine will also enable the target window, allowing CPU to access +* the target window. +* +* INPUT: +* target - Peripheral target enumerator. +* pAddrDecWin - CPU target window data structure. +* +* OUTPUT: +* N/A +* +* RETURN: +* MV_OK if CPU target window was set correctly, MV_ERROR in case of +* address window overlapps with other active CPU target window or +* trying to assign 36bit base address while CPU does not support that. +* The function returns MV_NOT_SUPPORTED, if the target is unsupported. +* +*******************************************************************************/ +MV_STATUS mvCpuIfTargetWinSet(MV_TARGET target, MV_CPU_DEC_WIN *pAddrDecWin) +{ + MV_AHB_TO_MBUS_DEC_WIN decWin; + MV_U32 existingWinNum; + MV_DRAM_DEC_WIN addrDecWin; + + target = MV_CHANGE_BOOT_CS(target); + + /* Check parameters */ + if (target >= MAX_TARGETS) + { + mvOsPrintf("mvCpuIfTargetWinSet: target %d is Illigal\n", target); + return MV_ERROR; + } + + /* 2) Check if the requested window overlaps with current windows */ + if (MV_TRUE == cpuTargetWinOverlap(target, &pAddrDecWin->addrWin)) + { + mvOsPrintf("mvCpuIfTargetWinSet: ERR. Target %d overlap\n", target); + return MV_BAD_PARAM; + } + + if (MV_TARGET_IS_DRAM(target)) + { + /* copy relevant data to MV_DRAM_DEC_WIN structure */ + addrDecWin.addrWin.baseHigh = pAddrDecWin->addrWin.baseHigh; + addrDecWin.addrWin.baseLow = pAddrDecWin->addrWin.baseLow; + addrDecWin.addrWin.size = pAddrDecWin->addrWin.size; + addrDecWin.enable = pAddrDecWin->enable; + + + if (mvDramIfWinSet(target,&addrDecWin) != MV_OK); + { + mvOsPrintf("mvCpuIfTargetWinSet: mvDramIfWinSet Failed\n"); + return MV_ERROR; + } + + } + else + { + /* copy relevant data to MV_AHB_TO_MBUS_DEC_WIN structure */ + decWin.addrWin.baseLow = pAddrDecWin->addrWin.baseLow; + decWin.addrWin.baseHigh = pAddrDecWin->addrWin.baseHigh; + decWin.addrWin.size = pAddrDecWin->addrWin.size; + decWin.enable = pAddrDecWin->enable; + decWin.target = target; + + existingWinNum = mvAhbToMbusWinTargetGet(target); + + /* check if there is already another Window configured + for this target */ + if ((existingWinNum < MAX_AHB_TO_MBUS_WINS )&& + (existingWinNum != pAddrDecWin->winNum)) + { + /* if we want to enable the new winow number + passed by the user , then the old one should + be disabled */ + if (MV_TRUE == pAddrDecWin->enable) + { + /* be sure it is disabled */ + mvAhbToMbusWinEnable(existingWinNum , MV_FALSE); + } + } + + if (mvAhbToMbusWinSet(pAddrDecWin->winNum,&decWin) != MV_OK) + { + mvOsPrintf("mvCpuIfTargetWinSet: mvAhbToMbusWinSet Failed\n"); + return MV_ERROR; + } + + } + + return MV_OK; +} + +/******************************************************************************* +* mvCpuIfTargetWinGet - Get CPU-to-peripheral target address window +* +* DESCRIPTION: +* Get the CPU peripheral target address window. +* +* INPUT: +* target - Peripheral target enumerator +* +* OUTPUT: +* pAddrDecWin - CPU target window information data structure. +* +* RETURN: +* MV_OK if target exist, MV_ERROR otherwise. +* +*******************************************************************************/ +MV_STATUS mvCpuIfTargetWinGet(MV_TARGET target, MV_CPU_DEC_WIN *pAddrDecWin) +{ + + MV_U32 winNum=0xffffffff; + MV_AHB_TO_MBUS_DEC_WIN decWin; + MV_DRAM_DEC_WIN addrDecWin; + + target = MV_CHANGE_BOOT_CS(target); + + /* Check parameters */ + if (target >= MAX_TARGETS) + { + mvOsPrintf("mvCpuIfTargetWinGet: target %d is Illigal\n", target); + return MV_ERROR; + } + + if (MV_TARGET_IS_DRAM(target)) + { + if (mvDramIfWinGet(target,&addrDecWin) != MV_OK) + { + mvOsPrintf("mvCpuIfTargetWinGet: Failed to get window target %d\n", + target); + return MV_ERROR; + } + + /* copy relevant data to MV_CPU_DEC_WIN structure */ + pAddrDecWin->addrWin.baseLow = addrDecWin.addrWin.baseLow; + pAddrDecWin->addrWin.baseHigh = addrDecWin.addrWin.baseHigh; + pAddrDecWin->addrWin.size = addrDecWin.addrWin.size; + pAddrDecWin->enable = addrDecWin.enable; + pAddrDecWin->winNum = 0xffffffff; + + } + else + { + /* get the Window number associated with this target */ + + winNum = mvAhbToMbusWinTargetGet(target); + if (winNum >= MAX_AHB_TO_MBUS_WINS) + { + return MV_NO_SUCH; + + } + + if (mvAhbToMbusWinGet(winNum , &decWin) != MV_OK) + { + mvOsPrintf("%s: mvAhbToMbusWinGet Failed at winNum = %d\n", + __FUNCTION__, winNum); + return MV_ERROR; + + } + + /* copy relevant data to MV_CPU_DEC_WIN structure */ + pAddrDecWin->addrWin.baseLow = decWin.addrWin.baseLow; + pAddrDecWin->addrWin.baseHigh = decWin.addrWin.baseHigh; + pAddrDecWin->addrWin.size = decWin.addrWin.size; + pAddrDecWin->enable = decWin.enable; + pAddrDecWin->winNum = winNum; + + } + + + + + return MV_OK; +} + + +/******************************************************************************* +* mvCpuIfTargetWinEnable - Enable/disable a CPU address decode window +* +* DESCRIPTION: +* This function enable/disable a CPU address decode window. +* if parameter 'enable' == MV_TRUE the routine will enable the +* window, thus enabling CPU accesses (before enabling the window it is +* tested for overlapping). Otherwise, the window will be disabled. +* +* INPUT: +* target - Peripheral target enumerator. +* enable - Enable/disable parameter. +* +* OUTPUT: +* N/A +* +* RETURN: +* MV_ERROR if protection window number was wrong, or the window +* overlapps other target window. +* +*******************************************************************************/ +MV_STATUS mvCpuIfTargetWinEnable(MV_TARGET target,MV_BOOL enable) +{ + MV_U32 winNum, temp; + MV_CPU_DEC_WIN addrDecWin; + + target = MV_CHANGE_BOOT_CS(target); + + /* Check parameters */ + if (target >= MAX_TARGETS) + { + mvOsPrintf("mvCpuIfTargetWinEnable: target %d is Illigal\n", target); + return MV_ERROR; + } + + /* get the window and check if it exist */ + temp = mvCpuIfTargetWinGet(target, &addrDecWin); + if (MV_NO_SUCH == temp) + { + return (enable? MV_ERROR: MV_OK); + } + else if( MV_OK != temp) + { + mvOsPrintf("%s: ERR. Getting target %d failed.\n",__FUNCTION__, target); + return MV_ERROR; + } + + + /* check overlap */ + + if (MV_TRUE == enable) + { + if (MV_TRUE == cpuTargetWinOverlap(target, &addrDecWin.addrWin)) + { + DB(mvOsPrintf("%s: ERR. Target %d overlap\n",__FUNCTION__, target)); + return MV_ERROR; + } + + } + + + if (MV_TARGET_IS_DRAM(target)) + { + if (mvDramIfWinEnable(target , enable) != MV_OK) + { + mvOsPrintf("mvCpuIfTargetWinGet: mvDramIfWinEnable Failed at \n"); + return MV_ERROR; + + } + + } + else + { + /* get the Window number associated with this target */ + + winNum = mvAhbToMbusWinTargetGet(target); + + if (winNum >= MAX_AHB_TO_MBUS_WINS) + { + return (enable? MV_ERROR: MV_OK); + } + + if (mvAhbToMbusWinEnable(winNum , enable) != MV_OK) + { + mvOsPrintf("mvCpuIfTargetWinGet: Failed to enable window = %d\n", + winNum); + return MV_ERROR; + + } + + } + + return MV_OK; +} + + +/******************************************************************************* +* mvCpuIfTargetWinSizeGet - Get CPU target address window size +* +* DESCRIPTION: +* Get the size of CPU-to-peripheral target window. +* +* INPUT: +* target - Peripheral target enumerator +* +* OUTPUT: +* None. +* +* RETURN: +* 32bit size. Function also returns '0' if window is closed. +* Function returns 0xFFFFFFFF in case of an error. +* +*******************************************************************************/ +MV_U32 mvCpuIfTargetWinSizeGet(MV_TARGET target) +{ + MV_CPU_DEC_WIN addrDecWin; + + target = MV_CHANGE_BOOT_CS(target); + + /* Check parameters */ + if (target >= MAX_TARGETS) + { + mvOsPrintf("mvCpuIfTargetWinSizeGet: target %d is Illigal\n", target); + return 0; + } + + /* Get the winNum window */ + if (MV_OK != mvCpuIfTargetWinGet(target, &addrDecWin)) + { + mvOsPrintf("mvCpuIfTargetWinSizeGet:ERR. Getting target %d failed.\n", + target); + return 0; + } + + /* Check if window is enabled */ + if (addrDecWin.enable == MV_TRUE) + { + return (addrDecWin.addrWin.size); + } + else + { + return 0; /* Window disabled. return 0 */ + } +} + +/******************************************************************************* +* mvCpuIfTargetWinBaseLowGet - Get CPU target address window base low +* +* DESCRIPTION: +* CPU-to-peripheral target address window base is constructed of +* two parts: Low and high. +* This function gets the CPU peripheral target low base address. +* +* INPUT: +* target - Peripheral target enumerator +* +* OUTPUT: +* None. +* +* RETURN: +* 32bit low base address. +* +*******************************************************************************/ +MV_U32 mvCpuIfTargetWinBaseLowGet(MV_TARGET target) +{ + MV_CPU_DEC_WIN addrDecWin; + + target = MV_CHANGE_BOOT_CS(target); + + /* Check parameters */ + if (target >= MAX_TARGETS) + { + mvOsPrintf("mvCpuIfTargetWinBaseLowGet: target %d is Illigal\n", target); + return 0xffffffff; + } + + /* Get the target window */ + if (MV_OK != mvCpuIfTargetWinGet(target, &addrDecWin)) + { + mvOsPrintf("mvCpuIfTargetWinBaseLowGet:ERR. Getting target %d failed.\n", + target); + return 0xffffffff; + } + + if (MV_FALSE == addrDecWin.enable) + { + return 0xffffffff; + } + return (addrDecWin.addrWin.baseLow); +} + +/******************************************************************************* +* mvCpuIfTargetWinBaseHighGet - Get CPU target address window base high +* +* DESCRIPTION: +* CPU-to-peripheral target address window base is constructed of +* two parts: Low and high. +* This function gets the CPU peripheral target high base address. +* +* INPUT: +* target - Peripheral target enumerator +* +* OUTPUT: +* None. +* +* RETURN: +* 32bit high base address. +* +*******************************************************************************/ +MV_U32 mvCpuIfTargetWinBaseHighGet(MV_TARGET target) +{ + MV_CPU_DEC_WIN addrDecWin; + + target = MV_CHANGE_BOOT_CS(target); + + /* Check parameters */ + if (target >= MAX_TARGETS) + { + mvOsPrintf("mvCpuIfTargetWinBaseLowGet: target %d is Illigal\n", target); + return 0xffffffff; + } + + /* Get the target window */ + if (MV_OK != mvCpuIfTargetWinGet(target, &addrDecWin)) + { + mvOsPrintf("mvCpuIfTargetWinBaseHighGet:ERR. Getting target %d failed.\n", + target); + return 0xffffffff; + } + + if (MV_FALSE == addrDecWin.enable) + { + return 0; + } + + return (addrDecWin.addrWin.baseHigh); +} + +#if defined(MV_INCLUDE_PEX) +/******************************************************************************* +* mvCpuIfPexRemap - Set CPU remap register for address windows. +* +* DESCRIPTION: +* +* INPUT: +* pexTarget - Peripheral target enumerator. Must be a PEX target. +* pAddrDecWin - CPU target window information data structure. +* Note that caller has to fill in the base field only. The +* size field is ignored. +* +* OUTPUT: +* None. +* +* RETURN: +* MV_ERROR if target is not a PEX one, MV_OK otherwise. +* +*******************************************************************************/ +MV_U32 mvCpuIfPexRemap(MV_TARGET pexTarget, MV_ADDR_WIN *pAddrDecWin) +{ + MV_U32 winNum; + + /* Check parameters */ + + if (mvCtrlPexMaxIfGet() > 1) + { + if ((!MV_TARGET_IS_PEX1(pexTarget))&&(!MV_TARGET_IS_PEX0(pexTarget))) + { + mvOsPrintf("mvCpuIfPexRemap: target %d is Illigal\n",pexTarget); + return 0xffffffff; + } + + } + else + { + if (!MV_TARGET_IS_PEX0(pexTarget)) + { + mvOsPrintf("mvCpuIfPexRemap: target %d is Illigal\n",pexTarget); + return 0xffffffff; + } + + } + + /* get the Window number associated with this target */ + winNum = mvAhbToMbusWinTargetGet(pexTarget); + + if (winNum >= MAX_AHB_TO_MBUS_WINS) + { + mvOsPrintf("mvCpuIfPexRemap: mvAhbToMbusWinTargetGet Failed\n"); + return 0xffffffff; + + } + + return mvAhbToMbusWinRemap(winNum , pAddrDecWin); +} + +#endif + +#if defined(MV_INCLUDE_PCI) +/******************************************************************************* +* mvCpuIfPciRemap - Set CPU remap register for address windows. +* +* DESCRIPTION: +* +* INPUT: +* pciTarget - Peripheral target enumerator. Must be a PCI target. +* pAddrDecWin - CPU target window information data structure. +* Note that caller has to fill in the base field only. The +* size field is ignored. +* +* OUTPUT: +* None. +* +* RETURN: +* MV_ERROR if target is not a PCI one, MV_OK otherwise. +* +*******************************************************************************/ +MV_U32 mvCpuIfPciRemap(MV_TARGET pciTarget, MV_ADDR_WIN *pAddrDecWin) +{ + MV_U32 winNum; + + /* Check parameters */ + if (!MV_TARGET_IS_PCI(pciTarget)) + { + mvOsPrintf("mvCpuIfPciRemap: target %d is Illigal\n",pciTarget); + return 0xffffffff; + } + + /* get the Window number associated with this target */ + winNum = mvAhbToMbusWinTargetGet(pciTarget); + + if (winNum >= MAX_AHB_TO_MBUS_WINS) + { + mvOsPrintf("mvCpuIfPciRemap: mvAhbToMbusWinTargetGet Failed\n"); + return 0xffffffff; + + } + + return mvAhbToMbusWinRemap(winNum , pAddrDecWin); +} +#endif /* MV_INCLUDE_PCI */ + + +/******************************************************************************* +* mvCpuIfPciIfRemap - Set CPU remap register for address windows. +* +* DESCRIPTION: +* +* INPUT: +* pciTarget - Peripheral target enumerator. Must be a PCI target. +* pAddrDecWin - CPU target window information data structure. +* Note that caller has to fill in the base field only. The +* size field is ignored. +* +* OUTPUT: +* None. +* +* RETURN: +* MV_ERROR if target is not a PCI one, MV_OK otherwise. +* +*******************************************************************************/ +MV_U32 mvCpuIfPciIfRemap(MV_TARGET pciIfTarget, MV_ADDR_WIN *pAddrDecWin) +{ +#if defined(MV_INCLUDE_PEX) + if (MV_TARGET_IS_PEX(pciIfTarget)) + { + return mvCpuIfPexRemap(pciIfTarget,pAddrDecWin); + } +#endif +#if defined(MV_INCLUDE_PCI) + + if (MV_TARGET_IS_PCI(pciIfTarget)) + { + return mvCpuIfPciRemap(pciIfTarget,pAddrDecWin); + } +#endif + return 0; +} + + + +/******************************************************************************* +* mvCpuIfTargetOfBaseAddressGet - Get the target according to base address +* +* DESCRIPTION: +* +* INPUT: +* baseAddress - base address to be checked +* +* OUTPUT: +* None. +* +* RETURN: +* the target number that baseAddress belongs to or MAX_TARGETS is not +* found +* +*******************************************************************************/ + +MV_TARGET mvCpuIfTargetOfBaseAddressGet(MV_U32 baseAddress) +{ + MV_CPU_DEC_WIN win; + MV_U32 target; + + for( target = 0; target < MAX_TARGETS; target++ ) + { + if( mvCpuIfTargetWinGet( target, &win ) == MV_OK ) + { + if( win.enable ) + { + if ((baseAddress >= win.addrWin.baseLow) && + (baseAddress < win.addrWin.baseLow + win.addrWin.size)) break; + } + } + else return MAX_TARGETS; + + } + + return target; +} +/******************************************************************************* +* cpuTargetWinOverlap - Detect CPU address decode windows overlapping +* +* DESCRIPTION: +* An unpredicted behaviur is expected in case CPU address decode +* windows overlapps. +* This function detects CPU address decode windows overlapping of a +* specified target. The function does not check the target itself for +* overlapping. The function also skipps disabled address decode windows. +* +* INPUT: +* target - Peripheral target enumerator. +* pAddrDecWin - An address decode window struct. +* +* OUTPUT: +* None. +* +* RETURN: +* MV_TRUE if the given address window overlaps current address +* decode map, MV_FALSE otherwise. +* +*******************************************************************************/ +static MV_BOOL cpuTargetWinOverlap(MV_TARGET target, MV_ADDR_WIN *pAddrWin) +{ + MV_U32 targetNum; + MV_CPU_DEC_WIN addrDecWin; + MV_STATUS status; + + + for(targetNum = 0; targetNum < MAX_TARGETS; targetNum++) + { +#if defined(MV_RUN_FROM_FLASH) + if(MV_TARGET_IS_AS_BOOT(target)) + { + if (MV_CHANGE_BOOT_CS(targetNum) == target) + continue; + } +#endif /* MV_RUN_FROM_FLASH */ + + /* don't check our target or illegal targets */ + if (targetNum == target) + { + continue; + } + + /* Get window parameters */ + status = mvCpuIfTargetWinGet(targetNum, &addrDecWin); + if(MV_NO_SUCH == status) + { + continue; + } + if(MV_OK != status) + { + DB(mvOsPrintf("cpuTargetWinOverlap: ERR. TargetWinGet failed\n")); + return MV_TRUE; + } + + /* Do not check disabled windows */ + if (MV_FALSE == addrDecWin.enable) + { + continue; + } + + if(MV_TRUE == ctrlWinOverlapTest(pAddrWin, &addrDecWin.addrWin)) + { + DB(mvOsPrintf( + "cpuTargetWinOverlap: Required target %d overlap current %d\n", + target, targetNum)); + return MV_TRUE; + } + } + + return MV_FALSE; + +} + +/******************************************************************************* +* mvCpuIfAddDecShow - Print the CPU address decode map. +* +* DESCRIPTION: +* This function print the CPU address decode map. +* +* INPUT: +* None. +* +* OUTPUT: +* None. +* +* RETURN: +* None. +* +*******************************************************************************/ +MV_VOID mvCpuIfAddDecShow(MV_VOID) +{ + MV_CPU_DEC_WIN win; + MV_U32 target; + mvOsOutput( "\n" ); + mvOsOutput( "CPU Interface\n" ); + mvOsOutput( "-------------\n" ); + + for( target = 0; target < MAX_TARGETS; target++ ) + { + + memset( &win, 0, sizeof(MV_CPU_DEC_WIN) ); + + mvOsOutput( "%s ",mvCtrlTargetNameGet(target)); + mvOsOutput( "...." ); + + if( mvCpuIfTargetWinGet( target, &win ) == MV_OK ) + { + if( win.enable ) + { + mvOsOutput( "base %08x, ", win.addrWin.baseLow ); + mvSizePrint( win.addrWin.size ); + mvOsOutput( "\n" ); + + } + else + mvOsOutput( "disable\n" ); + } + else if( mvCpuIfTargetWinGet( target, &win ) == MV_NO_SUCH ) + { + mvOsOutput( "no such\n" ); + } + } +} + +/******************************************************************************* +* mvCpuIfEnablePex - Enable PCI Express. +* +* DESCRIPTION: +* This function Enable PCI Express. +* +* INPUT: +* pexIf - PEX interface number. +* pexType - MV_PEX_ROOT_COMPLEX - root complex device +* MV_PEX_END_POINT - end point device +* OUTPUT: +* None. +* +* RETURN: +* None. +* +*******************************************************************************/ +#if defined(MV_INCLUDE_PEX) +MV_VOID mvCpuIfEnablePex(MV_U32 pexIf, MV_PEX_TYPE pexType) +{ + /* Set pex mode incase S@R not exist */ + if( pexType == MV_PEX_END_POINT) + { + MV_REG_BIT_RESET(PEX_CTRL_REG(pexIf),PXCR_DEV_TYPE_CTRL_MASK); + /* Change pex mode in capability reg */ + MV_REG_BIT_RESET(PEX_CFG_DIRECT_ACCESS(pexIf,PEX_CAPABILITY_REG), BIT22); + MV_REG_BIT_SET(PEX_CFG_DIRECT_ACCESS(pexIf,PEX_CAPABILITY_REG), BIT20); + + } + else + { + MV_REG_BIT_SET(PEX_CTRL_REG(pexIf),PXCR_DEV_TYPE_CTRL_MASK); + } + + /* CPU config register Pex enable */ + MV_REG_BIT_SET(CPU_CTRL_STAT_REG,CCSR_PCI_ACCESS_MASK); +} +#endif + + diff --git a/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/kw_family/ctrlEnv/sys/mvCpuIf.h b/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/kw_family/ctrlEnv/sys/mvCpuIf.h new file mode 100644 index 0000000000..224ed07f59 --- /dev/null +++ b/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/kw_family/ctrlEnv/sys/mvCpuIf.h @@ -0,0 +1,120 @@ +/******************************************************************************* +Copyright (C) Marvell International Ltd. and its affiliates + +This software file (the "File") is owned and distributed by Marvell +International Ltd. and/or its affiliates ("Marvell") under the following +alternative licensing terms. Once you have made an election to distribute the +File under one of the following license alternatives, please (i) delete this +introductory statement regarding license alternatives, (ii) delete the two +license alternatives that you have not elected to use and (iii) preserve the +Marvell copyright notice above. + +******************************************************************************** +Marvell Commercial License Option + +If you received this File from Marvell and you have entered into a commercial +license agreement (a "Commercial License") with Marvell, the File is licensed +to you under the terms of the applicable Commercial License. + +******************************************************************************** +Marvell GPL License Option + +If you received this File from Marvell, you may opt to use, redistribute and/or +modify this File in accordance with the terms and conditions of the General +Public License Version 2, June 1991 (the "GPL License"), a copy of which is +available along with the File in the license.txt file or by writing to the Free +Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or +on the worldwide web at http://www.gnu.org/licenses/gpl.txt. + +THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED +WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY +DISCLAIMED. The GPL License provides additional details about this warranty +disclaimer. +******************************************************************************** +Marvell BSD License Option + +If you received this File from Marvell, you may opt to use, redistribute and/or +modify this File under the following licensing terms. +Redistribution and use in source and binary forms, with or without modification, +are permitted provided that the following conditions are met: + + * Redistributions of source code must retain the above copyright notice, + this list of conditions and the following disclaimer. + + * Redistributions in binary form must reproduce the above copyright + notice, this list of conditions and the following disclaimer in the + documentation and/or other materials provided with the distribution. + + * Neither the name of Marvell nor the names of its contributors may be + used to endorse or promote products derived from this software without + specific prior written permission. + +THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND +ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED +WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE +DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR +ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES +(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; +LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON +ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS +SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + +*******************************************************************************/ + + +#ifndef __INCmvCpuIfh +#define __INCmvCpuIfh + +/* includes */ +#include "ctrlEnv/mvCtrlEnvLib.h" +#include "ctrlEnv/sys/mvCpuIfRegs.h" +#include "ctrlEnv/sys/mvAhbToMbus.h" +#include "ddr2/mvDramIf.h" +#include "ctrlEnv/sys/mvSysDram.h" +#if defined(MV_INCLUDE_PEX) +#include "pex/mvPex.h" +#endif + +/* defines */ + +/* typedefs */ +/* This structure describes CPU interface address decode window */ +typedef struct _mvCpuIfDecWin +{ + MV_ADDR_WIN addrWin; /* An address window*/ + MV_U32 winNum; /* Window Number in the AHB To Mbus bridge */ + MV_BOOL enable; /* Address decode window is enabled/disabled */ + +}MV_CPU_DEC_WIN; + + + +/* mvCpuIfLib.h API list */ + +/* mvCpuIfLib.h API list */ + +MV_STATUS mvCpuIfInit(MV_CPU_DEC_WIN *cpuAddrWinMap); +MV_STATUS mvCpuIfTargetWinSet(MV_TARGET target, MV_CPU_DEC_WIN *pAddrDecWin); +MV_STATUS mvCpuIfTargetWinGet(MV_TARGET target, MV_CPU_DEC_WIN *pAddrDecWin); +MV_STATUS mvCpuIfTargetWinEnable(MV_TARGET target,MV_BOOL enable); +MV_U32 mvCpuIfTargetWinSizeGet(MV_TARGET target); +MV_U32 mvCpuIfTargetWinBaseLowGet(MV_TARGET target); +MV_U32 mvCpuIfTargetWinBaseHighGet(MV_TARGET target); +MV_TARGET mvCpuIfTargetOfBaseAddressGet(MV_U32 baseAddress); +#if defined(MV_INCLUDE_PEX) +MV_U32 mvCpuIfPexRemap(MV_TARGET pexTarget, MV_ADDR_WIN *pAddrDecWin); +MV_VOID mvCpuIfEnablePex(MV_U32 pexIf, MV_PEX_TYPE pexType); +#endif +#if defined(MV_INCLUDE_PCI) +MV_U32 mvCpuIfPciRemap(MV_TARGET pciTarget, MV_ADDR_WIN *pAddrDecWin); +#endif +MV_U32 mvCpuIfPciIfRemap(MV_TARGET pciTarget, MV_ADDR_WIN *pAddrDecWin); + +MV_VOID mvCpuIfAddDecShow(MV_VOID); + +#if defined(MV88F6281) +MV_STATUS mvCpuIfBridgeReorderWAInit(void); +#endif + +#endif /* __INCmvCpuIfh */ diff --git a/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/kw_family/ctrlEnv/sys/mvCpuIfRegs.h b/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/kw_family/ctrlEnv/sys/mvCpuIfRegs.h new file mode 100644 index 0000000000..8cfeee2db0 --- /dev/null +++ b/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/kw_family/ctrlEnv/sys/mvCpuIfRegs.h @@ -0,0 +1,304 @@ +/******************************************************************************* +Copyright (C) Marvell International Ltd. and its affiliates + +This software file (the "File") is owned and distributed by Marvell +International Ltd. and/or its affiliates ("Marvell") under the following +alternative licensing terms. Once you have made an election to distribute the +File under one of the following license alternatives, please (i) delete this +introductory statement regarding license alternatives, (ii) delete the two +license alternatives that you have not elected to use and (iii) preserve the +Marvell copyright notice above. + +******************************************************************************** +Marvell Commercial License Option + +If you received this File from Marvell and you have entered into a commercial +license agreement (a "Commercial License") with Marvell, the File is licensed +to you under the terms of the applicable Commercial License. + +******************************************************************************** +Marvell GPL License Option + +If you received this File from Marvell, you may opt to use, redistribute and/or +modify this File in accordance with the terms and conditions of the General +Public License Version 2, June 1991 (the "GPL License"), a copy of which is +available along with the File in the license.txt file or by writing to the Free +Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or +on the worldwide web at http://www.gnu.org/licenses/gpl.txt. + +THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED +WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY +DISCLAIMED. The GPL License provides additional details about this warranty +disclaimer. +******************************************************************************** +Marvell BSD License Option + +If you received this File from Marvell, you may opt to use, redistribute and/or +modify this File under the following licensing terms. +Redistribution and use in source and binary forms, with or without modification, +are permitted provided that the following conditions are met: + + * Redistributions of source code must retain the above copyright notice, + this list of conditions and the following disclaimer. + + * Redistributions in binary form must reproduce the above copyright + notice, this list of conditions and the following disclaimer in the + documentation and/or other materials provided with the distribution. + + * Neither the name of Marvell nor the names of its contributors may be + used to endorse or promote products derived from this software without + specific prior written permission. + +THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND +ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED +WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE +DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR +ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES +(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; +LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON +ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS +SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + +*******************************************************************************/ + + +#ifndef __INCmvCpuIfRegsh +#define __INCmvCpuIfRegsh + +/****************************************/ +/* ARM Control and Status Registers Map */ +/****************************************/ + +#define CPU_CONFIG_REG 0x20100 +#define CPU_CTRL_STAT_REG 0x20104 +#define CPU_RSTOUTN_MASK_REG 0x20108 +#define CPU_SYS_SOFT_RST_REG 0x2010C +#define CPU_AHB_MBUS_CAUSE_INT_REG 0x20110 +#define CPU_AHB_MBUS_MASK_INT_REG 0x20114 +#define CPU_FTDLL_CONFIG_REG 0x20120 +#define CPU_L2_CONFIG_REG 0x20128 + + + +/* ARM Configuration register */ +/* CPU_CONFIG_REG (CCR) */ + + +/* Reset vector location */ +#define CCR_VEC_INIT_LOC_OFFS 1 +#define CCR_VEC_INIT_LOC_MASK BIT1 +/* reset at 0x00000000 */ +#define CCR_VEC_INIT_LOC_0000 (0 << CCR_VEC_INIT_LOC_OFFS) +/* reset at 0xFFFF0000 */ +#define CCR_VEC_INIT_LOC_FF00 (1 << CCR_VEC_INIT_LOC_OFFS) + + +#define CCR_AHB_ERROR_PROP_OFFS 2 +#define CCR_AHB_ERROR_PROP_MASK BIT2 +/* Erros are not propogated to AHB */ +#define CCR_AHB_ERROR_PROP_NO_INDICATE (0 << CCR_AHB_ERROR_PROP_OFFS) +/* Erros are propogated to AHB */ +#define CCR_AHB_ERROR_PROP_INDICATE (1 << CCR_AHB_ERROR_PROP_OFFS) + + +#define CCR_ENDIAN_INIT_OFFS 3 +#define CCR_ENDIAN_INIT_MASK BIT3 +#define CCR_ENDIAN_INIT_LITTLE (0 << CCR_ENDIAN_INIT_OFFS) +#define CCR_ENDIAN_INIT_BIG (1 << CCR_ENDIAN_INIT_OFFS) + + +#define CCR_INCR_EN_OFFS 4 +#define CCR_INCR_EN_MASK BIT4 +#define CCR_INCR_EN BIT4 + + +#define CCR_NCB_BLOCKING_OFFS 5 +#define CCR_NCB_BLOCKING_MASK (1 << CCR_NCB_BLOCKING_OFFS) +#define CCR_NCB_BLOCKING_NON (0 << CCR_NCB_BLOCKING_OFFS) +#define CCR_NCB_BLOCKING_EN (1 << CCR_NCB_BLOCKING_OFFS) + +#define CCR_CPU_2_MBUSL_TICK_DRV_OFFS 8 +#define CCR_CPU_2_MBUSL_TICK_DRV_MASK (0xF << CCR_CPU_2_MBUSL_TICK_DRV_OFFS) +#define CCR_CPU_2_MBUSL_TICK_SMPL_OFFS 12 +#define CCR_CPU_2_MBUSL_TICK_SMPL_MASK (0xF << CCR_CPU_2_MBUSL_TICK_SMPL_OFFS) +#define CCR_ICACH_PREF_BUF_ENABLE BIT16 +#define CCR_DCACH_PREF_BUF_ENABLE BIT17 + +/* Ratio options for CPU to DDR for 6281/6192/6190 */ +#define CPU_2_DDR_CLK_1x3 4 +#define CPU_2_DDR_CLK_1x4 6 + +/* Ratio options for CPU to DDR for 6281 only */ +#define CPU_2_DDR_CLK_2x9 7 +#define CPU_2_DDR_CLK_1x5 8 +#define CPU_2_DDR_CLK_1x6 9 + +/* Ratio options for CPU to DDR for 6180 only */ +#define CPU_2_DDR_CLK_1x3_1 0x5 +#define CPU_2_DDR_CLK_1x4_1 0x6 + +/* Default values for CPU to Mbus-L DDR Interface Tick Driver and */ +/* CPU to Mbus-L Tick Sample fields in CPU config register */ + +#define TICK_DRV_1x1 0 +#define TICK_DRV_1x2 0 +#define TICK_DRV_1x3 1 +#define TICK_DRV_1x4 2 +#define TICK_SMPL_1x1 0 +#define TICK_SMPL_1x2 1 +#define TICK_SMPL_1x3 0 +#define TICK_SMPL_1x4 0 + +#define CPU_2_MBUSL_DDR_CLK_1x2 \ + ((TICK_DRV_1x2 << CCR_CPU_2_MBUSL_TICK_DRV_OFFS) | \ + (TICK_SMPL_1x2 << CCR_CPU_2_MBUSL_TICK_SMPL_OFFS)) +#define CPU_2_MBUSL_DDR_CLK_1x3 \ + ((TICK_DRV_1x3 << CCR_CPU_2_MBUSL_TICK_DRV_OFFS) | \ + (TICK_SMPL_1x3 << CCR_CPU_2_MBUSL_TICK_SMPL_OFFS)) +#define CPU_2_MBUSL_DDR_CLK_1x4 \ + ((TICK_DRV_1x4 << CCR_CPU_2_MBUSL_TICK_DRV_OFFS) | \ + (TICK_SMPL_1x4 << CCR_CPU_2_MBUSL_TICK_SMPL_OFFS)) + +/* ARM Control and Status register */ +/* CPU_CTRL_STAT_REG (CCSR) */ + + +/* +This is used to block PCI express\PCI from access Socrates/Feroceon GP +while ARM boot is still in progress +*/ + +#define CCSR_PCI_ACCESS_OFFS 0 +#define CCSR_PCI_ACCESS_MASK BIT0 +#define CCSR_PCI_ACCESS_ENABLE (0 << CCSR_PCI_ACCESS_OFFS) +#define CCSR_PCI_ACCESS_DISBALE (1 << CCSR_PCI_ACCESS_OFFS) + +#define CCSR_ARM_RESET BIT1 +#define CCSR_SELF_INT BIT2 +#define CCSR_BIG_ENDIAN BIT15 + + +/* RSTOUTn Mask Register */ +/* CPU_RSTOUTN_MASK_REG (CRMR) */ + +#define CRMR_PEX_RST_OUT_OFFS 0 +#define CRMR_PEX_RST_OUT_MASK BIT0 +#define CRMR_PEX_RST_OUT_ENABLE (1 << CRMR_PEX_RST_OUT_OFFS) +#define CRMR_PEX_RST_OUT_DISABLE (0 << CRMR_PEX_RST_OUT_OFFS) + +#define CRMR_WD_RST_OUT_OFFS 1 +#define CRMR_WD_RST_OUT_MASK BIT1 +#define CRMR_WD_RST_OUT_ENABLE (1 << CRMR_WD_RST_OUT_OFFS) +#define CRMR_WD_RST_OUT_DISBALE (0 << CRMR_WD_RST_OUT_OFFS) + +#define CRMR_SOFT_RST_OUT_OFFS 2 +#define CRMR_SOFT_RST_OUT_MASK BIT2 +#define CRMR_SOFT_RST_OUT_ENABLE (1 << CRMR_SOFT_RST_OUT_OFFS) +#define CRMR_SOFT_RST_OUT_DISBALE (0 << CRMR_SOFT_RST_OUT_OFFS) + +/* System Software Reset Register */ +/* CPU_SYS_SOFT_RST_REG (CSSRR) */ + +#define CSSRR_SYSTEM_SOFT_RST BIT0 + +/* AHB to Mbus Bridge Interrupt Cause Register*/ +/* CPU_AHB_MBUS_CAUSE_INT_REG (CAMCIR) */ + +#define CAMCIR_ARM_SELF_INT BIT0 +#define CAMCIR_ARM_TIMER0_INT_REQ BIT1 +#define CAMCIR_ARM_TIMER1_INT_REQ BIT2 +#define CAMCIR_ARM_WD_TIMER_INT_REQ BIT3 + + +/* AHB to Mbus Bridge Interrupt Mask Register*/ +/* CPU_AHB_MBUS_MASK_INT_REG (CAMMIR) */ + +#define CAMCIR_ARM_SELF_INT_OFFS 0 +#define CAMCIR_ARM_SELF_INT_MASK BIT0 +#define CAMCIR_ARM_SELF_INT_EN (1 << CAMCIR_ARM_SELF_INT_OFFS) +#define CAMCIR_ARM_SELF_INT_DIS (0 << CAMCIR_ARM_SELF_INT_OFFS) + + +#define CAMCIR_ARM_TIMER0_INT_REQ_OFFS 1 +#define CAMCIR_ARM_TIMER0_INT_REQ_MASK BIT1 +#define CAMCIR_ARM_TIMER0_INT_REQ_EN (1 << CAMCIR_ARM_TIMER0_INT_REQ_OFFS) +#define CAMCIR_ARM_TIMER0_INT_REQ_DIS (0 << CAMCIR_ARM_TIMER0_INT_REQ_OFFS) + +#define CAMCIR_ARM_TIMER1_INT_REQ_OFFS 2 +#define CAMCIR_ARM_TIMER1_INT_REQ_MASK BIT2 +#define CAMCIR_ARM_TIMER1_INT_REQ_EN (1 << CAMCIR_ARM_TIMER1_INT_REQ_OFFS) +#define CAMCIR_ARM_TIMER1_INT_REQ_DIS (0 << CAMCIR_ARM_TIMER1_INT_REQ_OFFS) + +#define CAMCIR_ARM_WD_TIMER_INT_REQ_OFFS 3 +#define CAMCIR_ARM_WD_TIMER_INT_REQ_MASK BIT3 +#define CAMCIR_ARM_WD_TIMER_INT_REQ_EN (1 << CAMCIR_ARM_WD_TIMER_INT_REQ_OFFS) +#define CAMCIR_ARM_WD_TIMER_INT_REQ_DIS (0 << CAMCIR_ARM_WD_TIMER_INT_REQ_OFFS) + +/* CPU FTDLL Config register (CFCR) fields */ +#define CFCR_FTDLL_ICACHE_TAG_OFFS 0 +#define CFCR_FTDLL_ICACHE_TAG_MASK (0x7F << CFCR_FTDLL_ICACHE_TAG_OFFS) +#define CFCR_FTDLL_DCACHE_TAG_OFFS 8 +#define CFCR_FTDLL_DCACHE_TAG_MASK (0x7F << CFCR_FTDLL_DCACHE_TAG_OFFS) +#define CFCR_FTDLL_OVERWRITE_ENABLE (1 << 15) +/* For Orion 2 D2 only */ +#define CFCR_MRVL_CPU_ID_OFFS 16 +#define CFCR_MRVL_CPU_ID_MASK (0x1 << CFCR_MRVL_CPU_ID_OFFS) +#define CFCR_ARM_CPU_ID (0x0 << CFCR_MRVL_CPU_ID_OFFS) +#define CFCR_MRVL_CPU_ID (0x1 << CFCR_MRVL_CPU_ID_OFFS) +#define CFCR_VFP_SUB_ARC_NUM_OFFS 7 +#define CFCR_VFP_SUB_ARC_NUM_MASK (0x1 << CFCR_VFP_SUB_ARC_NUM_OFFS) +#define CFCR_VFP_SUB_ARC_NUM_1 (0x0 << CFCR_VFP_SUB_ARC_NUM_OFFS) +#define CFCR_VFP_SUB_ARC_NUM_2 (0x1 << CFCR_VFP_SUB_ARC_NUM_OFFS) + +/* CPU_L2_CONFIG_REG fields */ +#ifdef MV_CPU_LE +#define CL2CR_L2_ECC_EN_OFFS 2 +#define CL2CR_L2_WT_MODE_OFFS 4 +#else +#define CL2CR_L2_ECC_EN_OFFS 26 +#define CL2CR_L2_WT_MODE_OFFS 28 +#endif + +#define CL2CR_L2_ECC_EN_MASK (1 << CL2CR_L2_ECC_EN_OFFS) +#define CL2CR_L2_WT_MODE_MASK (1 << CL2CR_L2_WT_MODE_OFFS) + +/*******************************************/ +/* Main Interrupt Controller Registers Map */ +/*******************************************/ + +#define CPU_MAIN_INT_CAUSE_REG 0x20200 +#define CPU_MAIN_IRQ_MASK_REG 0x20204 +#define CPU_MAIN_FIQ_MASK_REG 0x20208 +#define CPU_ENPOINT_MASK_REG 0x2020C +#define CPU_MAIN_INT_CAUSE_HIGH_REG 0x20210 +#define CPU_MAIN_IRQ_MASK_HIGH_REG 0x20214 +#define CPU_MAIN_FIQ_MASK_HIGH_REG 0x20218 +#define CPU_ENPOINT_MASK_HIGH_REG 0x2021C + + +/*******************************************/ +/* ARM Doorbell Registers Map */ +/*******************************************/ + +#define CPU_HOST_TO_ARM_DRBL_REG 0x20400 +#define CPU_HOST_TO_ARM_MASK_REG 0x20404 +#define CPU_ARM_TO_HOST_DRBL_REG 0x20408 +#define CPU_ARM_TO_HOST_MASK_REG 0x2040C + + + +/* CPU control register map */ +/* Set bits means value is about to change according to new value */ +#define CPU_CONFIG_DEFAULT_MASK (CCR_VEC_INIT_LOC_MASK | CCR_AHB_ERROR_PROP_MASK) + +#define CPU_CONFIG_DEFAULT (CCR_VEC_INIT_LOC_FF00) + +/* CPU Control and status defaults */ +#define CPU_CTRL_STAT_DEFAULT_MASK (CCSR_PCI_ACCESS_MASK) + + +#define CPU_CTRL_STAT_DEFAULT (CCSR_PCI_ACCESS_ENABLE) + +#endif /* __INCmvCpuIfRegsh */ + diff --git a/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/kw_family/ctrlEnv/sys/mvSysAudio.c b/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/kw_family/ctrlEnv/sys/mvSysAudio.c new file mode 100644 index 0000000000..769475f8f4 --- /dev/null +++ b/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/kw_family/ctrlEnv/sys/mvSysAudio.c @@ -0,0 +1,324 @@ +/******************************************************************************* +Copyright (C) Marvell International Ltd. and its affiliates + +This software file (the "File") is owned and distributed by Marvell +International Ltd. and/or its affiliates ("Marvell") under the following +alternative licensing terms. Once you have made an election to distribute the +File under one of the following license alternatives, please (i) delete this +introductory statement regarding license alternatives, (ii) delete the two +license alternatives that you have not elected to use and (iii) preserve the +Marvell copyright notice above. + +******************************************************************************** +Marvell Commercial License Option + +If you received this File from Marvell and you have entered into a commercial +license agreement (a "Commercial License") with Marvell, the File is licensed +to you under the terms of the applicable Commercial License. + +******************************************************************************** +Marvell GPL License Option + +If you received this File from Marvell, you may opt to use, redistribute and/or +modify this File in accordance with the terms and conditions of the General +Public License Version 2, June 1991 (the "GPL License"), a copy of which is +available along with the File in the license.txt file or by writing to the Free +Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or +on the worldwide web at http://www.gnu.org/licenses/gpl.txt. + +THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED +WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY +DISCLAIMED. The GPL License provides additional details about this warranty +disclaimer. +******************************************************************************** +Marvell BSD License Option + +If you received this File from Marvell, you may opt to use, redistribute and/or +modify this File under the following licensing terms. +Redistribution and use in source and binary forms, with or without modification, +are permitted provided that the following conditions are met: + + * Redistributions of source code must retain the above copyright notice, + this list of conditions and the following disclaimer. + + * Redistributions in binary form must reproduce the above copyright + notice, this list of conditions and the following disclaimer in the + documentation and/or other materials provided with the distribution. + + * Neither the name of Marvell nor the names of its contributors may be + used to endorse or promote products derived from this software without + specific prior written permission. + +THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND +ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED +WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE +DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR +ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES +(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; +LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON +ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS +SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + +*******************************************************************************/ +#include "mvSysAudio.h" + +/******************************************************************************* +* mvAudioWinSet - Set AUDIO target address window +* +* DESCRIPTION: +* This function sets a peripheral target (e.g. SDRAM bank0, PCI_MEM0) +* address window, also known as address decode window. +* After setting this target window, the AUDIO will be able to access the +* target within the address window. +* +* INPUT: +* winNum - AUDIO target address decode window number. +* pAddrDecWin - AUDIO target window data structure. +* +* OUTPUT: +* None. +* +* RETURN: +* MV_ERROR if address window overlapps with other address decode windows. +* MV_BAD_PARAM if base address is invalid parameter or target is +* unknown. +* +*******************************************************************************/ +MV_STATUS mvAudioWinSet(MV_U32 winNum, MV_AUDIO_DEC_WIN *pAddrDecWin) +{ + MV_TARGET_ATTRIB targetAttribs; + MV_DEC_REGS decRegs; + + /* Parameter checking */ + if (winNum >= MV_AUDIO_MAX_ADDR_DECODE_WIN) + { + mvOsPrintf("%s: ERR. Invalid win num %d\n",__FUNCTION__, winNum); + return MV_BAD_PARAM; + } + + /* check if address is aligned to the size */ + if(MV_IS_NOT_ALIGN(pAddrDecWin->addrWin.baseLow, pAddrDecWin->addrWin.size)) + { + mvOsPrintf("mvAudioWinSet:Error setting AUDIO window %d to "\ + "target %s.\nAddress 0x%08x is unaligned to size 0x%x.\n", + winNum, + mvCtrlTargetNameGet(pAddrDecWin->target), + pAddrDecWin->addrWin.baseLow, + pAddrDecWin->addrWin.size); + return MV_ERROR; + } + + decRegs.baseReg = 0; + decRegs.sizeReg = 0; + + if (MV_OK != mvCtrlAddrDecToReg(&(pAddrDecWin->addrWin),&decRegs)) + { + mvOsPrintf("%s: mvCtrlAddrDecToReg Failed\n", __FUNCTION__); + return MV_ERROR; + } + + mvCtrlAttribGet(pAddrDecWin->target, &targetAttribs); + + /* set attributes */ + decRegs.sizeReg &= ~MV_AUDIO_WIN_ATTR_MASK; + decRegs.sizeReg |= (targetAttribs.attrib << MV_AUDIO_WIN_ATTR_OFFSET); + + /* set target ID */ + decRegs.sizeReg &= ~MV_AUDIO_WIN_TARGET_MASK; + decRegs.sizeReg |= (targetAttribs.targetId << MV_AUDIO_WIN_TARGET_OFFSET); + + if (pAddrDecWin->enable == MV_TRUE) + { + decRegs.sizeReg |= MV_AUDIO_WIN_ENABLE_MASK; + } + else + { + decRegs.sizeReg &= ~MV_AUDIO_WIN_ENABLE_MASK; + } + + MV_REG_WRITE( MV_AUDIO_WIN_CTRL_REG(winNum), decRegs.sizeReg); + MV_REG_WRITE( MV_AUDIO_WIN_BASE_REG(winNum), decRegs.baseReg); + + return MV_OK; +} + +/******************************************************************************* +* mvAudioWinGet - Get AUDIO peripheral target address window. +* +* DESCRIPTION: +* Get AUDIO peripheral target address window. +* +* INPUT: +* winNum - AUDIO target address decode window number. +* +* OUTPUT: +* pAddrDecWin - AUDIO target window data structure. +* +* RETURN: +* MV_ERROR if register parameters are invalid. +* +*******************************************************************************/ +MV_STATUS mvAudioWinGet(MV_U32 winNum, MV_AUDIO_DEC_WIN *pAddrDecWin) +{ + MV_DEC_REGS decRegs; + MV_TARGET_ATTRIB targetAttrib; + + /* Parameter checking */ + if (winNum >= MV_AUDIO_MAX_ADDR_DECODE_WIN) + { + mvOsPrintf("%s : ERR. Invalid winNum %d\n", + __FUNCTION__, winNum); + return MV_NOT_SUPPORTED; + } + + decRegs.baseReg = MV_REG_READ( MV_AUDIO_WIN_BASE_REG(winNum) ); + decRegs.sizeReg = MV_REG_READ( MV_AUDIO_WIN_CTRL_REG(winNum) ); + + if (MV_OK != mvCtrlRegToAddrDec(&decRegs, &pAddrDecWin->addrWin) ) + { + mvOsPrintf("%s: mvCtrlRegToAddrDec Failed\n", __FUNCTION__); + return MV_ERROR; + } + + /* attrib and targetId */ + targetAttrib.attrib = (decRegs.sizeReg & MV_AUDIO_WIN_ATTR_MASK) >> + MV_AUDIO_WIN_ATTR_OFFSET; + targetAttrib.targetId = (decRegs.sizeReg & MV_AUDIO_WIN_TARGET_MASK) >> + MV_AUDIO_WIN_TARGET_OFFSET; + + pAddrDecWin->target = mvCtrlTargetGet(&targetAttrib); + + /* Check if window is enabled */ + if(decRegs.sizeReg & MV_AUDIO_WIN_ENABLE_MASK) + { + pAddrDecWin->enable = MV_TRUE; + } + else + { + pAddrDecWin->enable = MV_FALSE; + } + return MV_OK; +} +/******************************************************************************* +* mvAudioAddrDecShow - Print the AUDIO address decode map. +* +* DESCRIPTION: +* This function print the AUDIO address decode map. +* +* INPUT: +* None. +* +* OUTPUT: +* None. +* +* RETURN: +* None. +* +*******************************************************************************/ +MV_VOID mvAudioAddrDecShow(MV_VOID) +{ + + MV_AUDIO_DEC_WIN win; + int i; + + if (MV_FALSE == mvCtrlPwrClckGet(AUDIO_UNIT_ID, 0)) + return; + + + mvOsOutput( "\n" ); + mvOsOutput( "AUDIO:\n" ); + mvOsOutput( "----\n" ); + + for( i = 0; i < MV_AUDIO_MAX_ADDR_DECODE_WIN; i++ ) + { + memset( &win, 0, sizeof(MV_AUDIO_DEC_WIN) ); + + mvOsOutput( "win%d - ", i ); + + if( mvAudioWinGet( i, &win ) == MV_OK ) + { + if( win.enable ) + { + mvOsOutput( "%s base %08x, ", + mvCtrlTargetNameGet(win.target), win.addrWin.baseLow ); + mvOsOutput( "...." ); + + mvSizePrint( win.addrWin.size ); + + mvOsOutput( "\n" ); + } + else + mvOsOutput( "disable\n" ); + } + } +} + + +/******************************************************************************* +* mvAudioWinInit - Initialize the integrated AUDIO target address window. +* +* DESCRIPTION: +* Initialize the AUDIO peripheral target address window. +* +* INPUT: +* +* +* OUTPUT: +* +* +* RETURN: +* MV_ERROR if register parameters are invalid. +* +*******************************************************************************/ +MV_STATUS mvAudioInit(MV_VOID) +{ + int winNum; + MV_AUDIO_DEC_WIN audioWin; + MV_CPU_DEC_WIN cpuAddrDecWin; + MV_U32 status; + + mvAudioHalInit(); + + /* Initiate Audio address decode */ + + /* First disable all address decode windows */ + for(winNum = 0; winNum < MV_AUDIO_MAX_ADDR_DECODE_WIN; winNum++) + { + MV_U32 regVal = MV_REG_READ(MV_AUDIO_WIN_CTRL_REG(winNum)); + regVal &= ~MV_AUDIO_WIN_ENABLE_MASK; + MV_REG_WRITE(MV_AUDIO_WIN_CTRL_REG(winNum), regVal); + } + + for(winNum = 0; winNum < MV_AUDIO_MAX_ADDR_DECODE_WIN; winNum++) + { + + /* We will set the Window to DRAM_CS0 in default */ + /* first get attributes from CPU If */ + status = mvCpuIfTargetWinGet(SDRAM_CS0, + &cpuAddrDecWin); + + if (MV_OK != status) + { + mvOsPrintf("%s: ERR. mvCpuIfTargetWinGet failed\n", __FUNCTION__); + return MV_ERROR; + } + + if (cpuAddrDecWin.enable == MV_TRUE) + { + audioWin.addrWin.baseHigh = cpuAddrDecWin.addrWin.baseHigh; + audioWin.addrWin.baseLow = cpuAddrDecWin.addrWin.baseLow; + audioWin.addrWin.size = cpuAddrDecWin.addrWin.size; + audioWin.enable = MV_TRUE; + audioWin.target = SDRAM_CS0; + + if(MV_OK != mvAudioWinSet(winNum, &audioWin)) + { + return MV_ERROR; + } + } + } + + return MV_OK; +} + diff --git a/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/kw_family/ctrlEnv/sys/mvSysAudio.h b/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/kw_family/ctrlEnv/sys/mvSysAudio.h new file mode 100644 index 0000000000..f59eb9a904 --- /dev/null +++ b/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/kw_family/ctrlEnv/sys/mvSysAudio.h @@ -0,0 +1,123 @@ +/******************************************************************************* +Copyright (C) Marvell International Ltd. and its affiliates + +This software file (the "File") is owned and distributed by Marvell +International Ltd. and/or its affiliates ("Marvell") under the following +alternative licensing terms. Once you have made an election to distribute the +File under one of the following license alternatives, please (i) delete this +introductory statement regarding license alternatives, (ii) delete the two +license alternatives that you have not elected to use and (iii) preserve the +Marvell copyright notice above. + +******************************************************************************** +Marvell Commercial License Option + +If you received this File from Marvell and you have entered into a commercial +license agreement (a "Commercial License") with Marvell, the File is licensed +to you under the terms of the applicable Commercial License. + +******************************************************************************** +Marvell GPL License Option + +If you received this File from Marvell, you may opt to use, redistribute and/or +modify this File in accordance with the terms and conditions of the General +Public License Version 2, June 1991 (the "GPL License"), a copy of which is +available along with the File in the license.txt file or by writing to the Free +Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or +on the worldwide web at http://www.gnu.org/licenses/gpl.txt. + +THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED +WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY +DISCLAIMED. The GPL License provides additional details about this warranty +disclaimer. +******************************************************************************** +Marvell BSD License Option + +If you received this File from Marvell, you may opt to use, redistribute and/or +modify this File under the following licensing terms. +Redistribution and use in source and binary forms, with or without modification, +are permitted provided that the following conditions are met: + + * Redistributions of source code must retain the above copyright notice, + this list of conditions and the following disclaimer. + + * Redistributions in binary form must reproduce the above copyright + notice, this list of conditions and the following disclaimer in the + documentation and/or other materials provided with the distribution. + + * Neither the name of Marvell nor the names of its contributors may be + used to endorse or promote products derived from this software without + specific prior written permission. + +THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND +ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED +WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE +DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR +ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES +(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; +LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON +ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS +SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + +*******************************************************************************/ +#ifndef __INCMVSysAudioH +#define __INCMVSysAudioH + +#include "mvCommon.h" +#include "audio/mvAudio.h" +#include "ctrlEnv/mvCtrlEnvSpec.h" +#include "ctrlEnv/sys/mvCpuIf.h" + +/***********************************/ +/* Audio Address Decoding registers*/ +/***********************************/ + +#define MV_AUDIO_MAX_ADDR_DECODE_WIN 2 +#define MV_AUDIO_RECORD_WIN_NUM 0 +#define MV_AUDIO_PLAYBACK_WIN_NUM 1 + +#define MV_AUDIO_WIN_CTRL_REG(win) (AUDIO_REG_BASE + 0xA04 + ((win)<<3)) +#define MV_AUDIO_WIN_BASE_REG(win) (AUDIO_REG_BASE + 0xA00 + ((win)<<3)) + +#define MV_AUDIO_RECORD_WIN_CTRL_REG MV_AUDIO_WIN_CTRL_REG(MV_AUDIO_RECORD_WIN_NUM) +#define MV_AUDIO_RECORD_WIN_BASE_REG MV_AUDIO_WIN_BASE_REG(MV_AUDIO_RECORD_WIN_NUM) +#define MV_AUDIO_PLAYBACK_WIN_CTRL_REG MV_AUDIO_WIN_CTRL_REG(MV_AUDIO_PLAYBACK_WIN_NUM) +#define MV_AUDIO_PLAYBACK_WIN_BASE_REG MV_AUDIO_WIN_BASE_REG(MV_AUDIO_PLAYBACK_WIN_NUM) + + +/* BITs in Windows 0-3 Control and Base Registers */ +#define MV_AUDIO_WIN_ENABLE_BIT 0 +#define MV_AUDIO_WIN_ENABLE_MASK (1<= 2) +MV_TARGET tdmaAddrDecPrioTable[] = +{ +#if defined(MV_INCLUDE_SDRAM_CS0) + SDRAM_CS0, +#endif +#if defined(MV_INCLUDE_SDRAM_CS1) + SDRAM_CS1, +#endif +#if defined(MV_INCLUDE_SDRAM_CS2) + SDRAM_CS2, +#endif +#if defined(MV_INCLUDE_SDRAM_CS3) + SDRAM_CS3, +#endif +#if defined(MV_INCLUDE_PEX) + PEX0_MEM, +#endif + + TBL_TERM +}; + +/******************************************************************************* +* mvCesaWinGet - Get TDMA target address window. +* +* DESCRIPTION: +* Get TDMA target address window. +* +* INPUT: +* winNum - TDMA target address decode window number. +* +* OUTPUT: +* pDecWin - TDMA target window data structure. +* +* RETURN: +* MV_ERROR if register parameters are invalid. +* +*******************************************************************************/ +static MV_STATUS mvCesaWinGet(MV_U32 winNum, MV_DEC_WIN *pDecWin) +{ + MV_DEC_WIN_PARAMS winParam; + MV_U32 sizeReg, baseReg; + + /* Parameter checking */ + if (winNum >= MV_CESA_TDMA_ADDR_DEC_WIN) + { + mvOsPrintf("%s : ERR. Invalid winNum %d\n", + __FUNCTION__, winNum); + return MV_NOT_SUPPORTED; + } + + baseReg = MV_REG_READ( MV_CESA_TDMA_BASE_ADDR_REG(winNum) ); + sizeReg = MV_REG_READ( MV_CESA_TDMA_WIN_CTRL_REG(winNum) ); + + /* Check if window is enabled */ + if(sizeReg & MV_CESA_TDMA_WIN_ENABLE_MASK) + { + pDecWin->enable = MV_TRUE; + + /* Extract window parameters from registers */ + winParam.targetId = (sizeReg & MV_CESA_TDMA_WIN_TARGET_MASK) >> MV_CESA_TDMA_WIN_TARGET_OFFSET; + winParam.attrib = (sizeReg & MV_CESA_TDMA_WIN_ATTR_MASK) >> MV_CESA_TDMA_WIN_ATTR_OFFSET; + winParam.size = (sizeReg & MV_CESA_TDMA_WIN_SIZE_MASK) >> MV_CESA_TDMA_WIN_SIZE_OFFSET; + winParam.baseAddr = (baseReg & MV_CESA_TDMA_WIN_BASE_MASK); + + /* Translate the decode window parameters to address decode struct */ + if (MV_OK != mvCtrlParamsToAddrDec(&winParam, pDecWin)) + { + mvOsPrintf("Failed to translate register parameters to CESA address" \ + " decode window structure\n"); + return MV_ERROR; + } + } + else + { + pDecWin->enable = MV_FALSE; + } + return MV_OK; +} + +/******************************************************************************* +* cesaWinOverlapDetect - Detect CESA TDMA address windows overlapping +* +* DESCRIPTION: +* An unpredicted behaviur is expected in case TDMA address decode +* windows overlapps. +* This function detects TDMA address decode windows overlapping of a +* specified window. The function does not check the window itself for +* overlapping. The function also skipps disabled address decode windows. +* +* INPUT: +* winNum - address decode window number. +* pAddrDecWin - An address decode window struct. +* +* OUTPUT: +* None. +* +* RETURN: +* MV_TRUE - if the given address window overlap current address +* decode map, +* MV_FALSE - otherwise, MV_ERROR if reading invalid data +* from registers. +* +*******************************************************************************/ +static MV_STATUS cesaWinOverlapDetect(MV_U32 winNum, MV_ADDR_WIN *pAddrWin) +{ + MV_U32 winNumIndex; + MV_DEC_WIN addrDecWin; + + for(winNumIndex=0; winNumIndex= MV_CESA_TDMA_ADDR_DEC_WIN) + { + mvOsPrintf("mvCesaTdmaWinSet: ERR. Invalid win num %d\n",winNum); + return MV_BAD_PARAM; + } + + /* Check if the requested window overlapps with current windows */ + if (MV_TRUE == cesaWinOverlapDetect(winNum, &pDecWin->addrWin)) + { + mvOsPrintf("%s: ERR. Window %d overlap\n", __FUNCTION__, winNum); + return MV_ERROR; + } + + /* check if address is aligned to the size */ + if(MV_IS_NOT_ALIGN(pDecWin->addrWin.baseLow, pDecWin->addrWin.size)) + { + mvOsPrintf("mvCesaTdmaWinSet: Error setting CESA TDMA window %d to "\ + "target %s.\nAddress 0x%08x is unaligned to size 0x%x.\n", + winNum, + mvCtrlTargetNameGet(pDecWin->target), + pDecWin->addrWin.baseLow, + pDecWin->addrWin.size); + return MV_ERROR; + } + + if(MV_OK != mvCtrlAddrDecToParams(pDecWin, &winParams)) + { + mvOsPrintf("%s: mvCtrlAddrDecToParams Failed\n", __FUNCTION__); + return MV_ERROR; + } + + /* set Size, Attributes and TargetID */ + sizeReg = (((winParams.targetId << MV_CESA_TDMA_WIN_TARGET_OFFSET) & MV_CESA_TDMA_WIN_TARGET_MASK) | + ((winParams.attrib << MV_CESA_TDMA_WIN_ATTR_OFFSET) & MV_CESA_TDMA_WIN_ATTR_MASK) | + ((winParams.size << MV_CESA_TDMA_WIN_SIZE_OFFSET) & MV_CESA_TDMA_WIN_SIZE_MASK)); + + if (pDecWin->enable == MV_TRUE) + { + sizeReg |= MV_CESA_TDMA_WIN_ENABLE_MASK; + } + else + { + sizeReg &= ~MV_CESA_TDMA_WIN_ENABLE_MASK; + } + + /* Update Base value */ + baseReg = (winParams.baseAddr & MV_CESA_TDMA_WIN_BASE_MASK); + + MV_REG_WRITE( MV_CESA_TDMA_WIN_CTRL_REG(winNum), sizeReg); + MV_REG_WRITE( MV_CESA_TDMA_BASE_ADDR_REG(winNum), baseReg); + + return MV_OK; +} + + +static MV_STATUS mvCesaTdmaAddrDecInit (void) +{ + MV_U32 winNum; + MV_STATUS status; + MV_CPU_DEC_WIN cpuAddrDecWin; + MV_DEC_WIN cesaWin; + MV_U32 winPrioIndex = 0; + + /* First disable all address decode windows */ + for(winNum=0; winNum= 2 */ + + + + +MV_STATUS mvCesaInit (int numOfSession, int queueDepth, char* pSramBase, void *osHandle) +{ + MV_U32 cesaCryptEngBase; + MV_CPU_DEC_WIN addrDecWin; + + if(sizeof(MV_CESA_SRAM_MAP) > MV_CESA_SRAM_SIZE) + { + mvOsPrintf("mvCesaInit: Wrong SRAM map - %ld > %d\n", + sizeof(MV_CESA_SRAM_MAP), MV_CESA_SRAM_SIZE); + return MV_FAIL; + } +#if 0 + if (mvCpuIfTargetWinGet(CRYPT_ENG, &addrDecWin) == MV_OK) + cesaCryptEngBase = addrDecWin.addrWin.baseLow; + else + { + mvOsPrintf("mvCesaInit: ERR. mvCpuIfTargetWinGet failed\n"); + return MV_ERROR; + } +#else + cesaCryptEngBase = (MV_U32)pSramBase; +#endif + +#if 0 /* Already done in the platform init */ +#if (MV_CESA_VERSION >= 2) + mvCesaTdmaAddrDecInit(); +#endif /* MV_CESA_VERSION >= 2 */ +#endif + return mvCesaHalInit(numOfSession, queueDepth, pSramBase, cesaCryptEngBase, + osHandle); + +} diff --git a/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/kw_family/ctrlEnv/sys/mvSysCesa.h b/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/kw_family/ctrlEnv/sys/mvSysCesa.h new file mode 100644 index 0000000000..73bcdc5832 --- /dev/null +++ b/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/kw_family/ctrlEnv/sys/mvSysCesa.h @@ -0,0 +1,100 @@ +/******************************************************************************* +Copyright (C) Marvell International Ltd. and its affiliates + +This software file (the "File") is owned and distributed by Marvell +International Ltd. and/or its affiliates ("Marvell") under the following +alternative licensing terms. Once you have made an election to distribute the +File under one of the following license alternatives, please (i) delete this +introductory statement regarding license alternatives, (ii) delete the two +license alternatives that you have not elected to use and (iii) preserve the +Marvell copyright notice above. + +******************************************************************************** +Marvell Commercial License Option + +If you received this File from Marvell and you have entered into a commercial +license agreement (a "Commercial License") with Marvell, the File is licensed +to you under the terms of the applicable Commercial License. + +******************************************************************************** +Marvell GPL License Option + +If you received this File from Marvell, you may opt to use, redistribute and/or +modify this File in accordance with the terms and conditions of the General +Public License Version 2, June 1991 (the "GPL License"), a copy of which is +available along with the File in the license.txt file or by writing to the Free +Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or +on the worldwide web at http://www.gnu.org/licenses/gpl.txt. + +THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED +WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY +DISCLAIMED. The GPL License provides additional details about this warranty +disclaimer. +******************************************************************************** +Marvell BSD License Option + +If you received this File from Marvell, you may opt to use, redistribute and/or +modify this File under the following licensing terms. +Redistribution and use in source and binary forms, with or without modification, +are permitted provided that the following conditions are met: + + * Redistributions of source code must retain the above copyright notice, + this list of conditions and the following disclaimer. + + * Redistributions in binary form must reproduce the above copyright + notice, this list of conditions and the following disclaimer in the + documentation and/or other materials provided with the distribution. + + * Neither the name of Marvell nor the names of its contributors may be + used to endorse or promote products derived from this software without + specific prior written permission. + +THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND +ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED +WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE +DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR +ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES +(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; +LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON +ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS +SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + +*******************************************************************************/ + +#ifndef __mvSysCesa_h__ +#define __mvSysCesa_h__ + + +#include "mvCommon.h" +#include "cesa/mvCesa.h" +#include "ctrlEnv/mvCtrlEnvSpec.h" +#include "ctrlEnv/sys/mvCpuIf.h" + +/***************************** TDMA Registers *************************************/ + +#define MV_CESA_TDMA_ADDR_DEC_WIN 4 + +#define MV_CESA_TDMA_BASE_ADDR_REG(win) (MV_CESA_TDMA_REG_BASE + 0xa00 + (win<<3)) + +#define MV_CESA_TDMA_WIN_CTRL_REG(win) (MV_CESA_TDMA_REG_BASE + 0xa04 + (win<<3)) + +#define MV_CESA_TDMA_WIN_ENABLE_BIT 0 +#define MV_CESA_TDMA_WIN_ENABLE_MASK (1 << MV_CESA_TDMA_WIN_ENABLE_BIT) + +#define MV_CESA_TDMA_WIN_TARGET_OFFSET 4 +#define MV_CESA_TDMA_WIN_TARGET_MASK (0xf << MV_CESA_TDMA_WIN_TARGET_OFFSET) + +#define MV_CESA_TDMA_WIN_ATTR_OFFSET 8 +#define MV_CESA_TDMA_WIN_ATTR_MASK (0xff << MV_CESA_TDMA_WIN_ATTR_OFFSET) + +#define MV_CESA_TDMA_WIN_SIZE_OFFSET 16 +#define MV_CESA_TDMA_WIN_SIZE_MASK (0xFFFF << MV_CESA_TDMA_WIN_SIZE_OFFSET) + +#define MV_CESA_TDMA_WIN_BASE_OFFSET 16 +#define MV_CESA_TDMA_WIN_BASE_MASK (0xFFFF << MV_CESA_TDMA_WIN_BASE_OFFSET) + + +MV_STATUS mvCesaInit (int numOfSession, int queueDepth, char* pSramBase, void *osHandle); + +#endif diff --git a/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/kw_family/ctrlEnv/sys/mvSysDram.c b/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/kw_family/ctrlEnv/sys/mvSysDram.c new file mode 100644 index 0000000000..6f76c2caa9 --- /dev/null +++ b/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/kw_family/ctrlEnv/sys/mvSysDram.c @@ -0,0 +1,348 @@ +/******************************************************************************* +Copyright (C) Marvell International Ltd. and its affiliates + +This software file (the "File") is owned and distributed by Marvell +International Ltd. and/or its affiliates ("Marvell") under the following +alternative licensing terms. Once you have made an election to distribute the +File under one of the following license alternatives, please (i) delete this +introductory statement regarding license alternatives, (ii) delete the two +license alternatives that you have not elected to use and (iii) preserve the +Marvell copyright notice above. + +******************************************************************************** +Marvell Commercial License Option + +If you received this File from Marvell and you have entered into a commercial +license agreement (a "Commercial License") with Marvell, the File is licensed +to you under the terms of the applicable Commercial License. + +******************************************************************************** +Marvell GPL License Option + +If you received this File from Marvell, you may opt to use, redistribute and/or +modify this File in accordance with the terms and conditions of the General +Public License Version 2, June 1991 (the "GPL License"), a copy of which is +available along with the File in the license.txt file or by writing to the Free +Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or +on the worldwide web at http://www.gnu.org/licenses/gpl.txt. + +THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED +WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY +DISCLAIMED. The GPL License provides additional details about this warranty +disclaimer. +******************************************************************************** +Marvell BSD License Option + +If you received this File from Marvell, you may opt to use, redistribute and/or +modify this File under the following licensing terms. +Redistribution and use in source and binary forms, with or without modification, +are permitted provided that the following conditions are met: + + * Redistributions of source code must retain the above copyright notice, + this list of conditions and the following disclaimer. + + * Redistributions in binary form must reproduce the above copyright + notice, this list of conditions and the following disclaimer in the + documentation and/or other materials provided with the distribution. + + * Neither the name of Marvell nor the names of its contributors may be + used to endorse or promote products derived from this software without + specific prior written permission. + +THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND +ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED +WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE +DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR +ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES +(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; +LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON +ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS +SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + +*******************************************************************************/ + + +/* includes */ + +#include "ddr2/mvDramIf.h" +#include "ctrlEnv/sys/mvCpuIf.h" +#include "ctrlEnv/sys/mvSysDram.h" + +/* #define MV_DEBUG */ +#ifdef MV_DEBUG +#define DB(x) x +#else +#define DB(x) +#endif + +static MV_BOOL sdramIfWinOverlap(MV_TARGET target, MV_ADDR_WIN *pAddrWin); + +/******************************************************************************* +* mvDramIfWinSet - Set DRAM interface address decode window +* +* DESCRIPTION: +* This function sets DRAM interface address decode window. +* +* INPUT: +* target - System target. Use only SDRAM targets. +* pAddrDecWin - SDRAM address window structure. +* +* OUTPUT: +* None +* +* RETURN: +* MV_BAD_PARAM if parameters are invalid or window is invalid, MV_OK +* otherwise. +*******************************************************************************/ +MV_STATUS mvDramIfWinSet(MV_TARGET target, MV_DRAM_DEC_WIN *pAddrDecWin) +{ + MV_U32 baseReg=0,sizeReg=0; + MV_U32 baseToReg=0 , sizeToReg=0; + + /* Check parameters */ + if (!MV_TARGET_IS_DRAM(target)) + { + mvOsPrintf("mvDramIfWinSet: target %d is not SDRAM\n", target); + return MV_BAD_PARAM; + } + + /* Check if the requested window overlaps with current enabled windows */ + if (MV_TRUE == sdramIfWinOverlap(target, &pAddrDecWin->addrWin)) + { + mvOsPrintf("mvDramIfWinSet: ERR. Target %d overlaps\n", target); + return MV_BAD_PARAM; + } + + /* check if address is aligned to the size */ + if(MV_IS_NOT_ALIGN(pAddrDecWin->addrWin.baseLow, pAddrDecWin->addrWin.size)) + { + mvOsPrintf("mvDramIfWinSet:Error setting DRAM interface window %d."\ + "\nAddress 0x%08x is unaligned to size 0x%x.\n", + target, + pAddrDecWin->addrWin.baseLow, + pAddrDecWin->addrWin.size); + return MV_ERROR; + } + + /* read base register*/ + baseReg = MV_REG_READ(SDRAM_BASE_ADDR_REG(0,target)); + + /* read size register */ + sizeReg = MV_REG_READ(SDRAM_SIZE_REG(0,target)); + + /* BaseLow[31:16] => base register [31:16] */ + baseToReg = pAddrDecWin->addrWin.baseLow & SCBAR_BASE_MASK; + + /* Write to address decode Base Address Register */ + baseReg &= ~SCBAR_BASE_MASK; + baseReg |= baseToReg; + + /* Translate the given window size to register format */ + sizeToReg = ctrlSizeToReg(pAddrDecWin->addrWin.size, SCSR_SIZE_ALIGNMENT); + + /* Size parameter validity check. */ + if (-1 == sizeToReg) + { + mvOsPrintf("mvCtrlAddrDecToReg: ERR. Win %d size invalid.\n",target); + return MV_BAD_PARAM; + } + + /* set size */ + sizeReg &= ~SCSR_SIZE_MASK; + /* Size is located at upper 16 bits */ + sizeReg |= (sizeToReg << SCSR_SIZE_OFFS); + + /* enable/Disable */ + if (MV_TRUE == pAddrDecWin->enable) + { + sizeReg |= SCSR_WIN_EN; + } + else + { + sizeReg &= ~SCSR_WIN_EN; + } + + /* 3) Write to address decode Base Address Register */ + MV_REG_WRITE(SDRAM_BASE_ADDR_REG(0,target), baseReg); + + /* Write to address decode Size Register */ + MV_REG_WRITE(SDRAM_SIZE_REG(0,target), sizeReg); + + return MV_OK; +} +/******************************************************************************* +* mvDramIfWinGet - Get DRAM interface address decode window +* +* DESCRIPTION: +* This function gets DRAM interface address decode window. +* +* INPUT: +* target - System target. Use only SDRAM targets. +* +* OUTPUT: +* pAddrDecWin - SDRAM address window structure. +* +* RETURN: +* MV_BAD_PARAM if parameters are invalid or window is invalid, MV_OK +* otherwise. +*******************************************************************************/ +MV_STATUS mvDramIfWinGet(MV_TARGET target, MV_DRAM_DEC_WIN *pAddrDecWin) +{ + MV_U32 baseReg,sizeReg; + MV_U32 sizeRegVal; + /* Check parameters */ + if (!MV_TARGET_IS_DRAM(target)) + { + mvOsPrintf("mvDramIfWinGet: target %d is Illigal\n", target); + return MV_ERROR; + } + + /* Read base and size registers */ + sizeReg = MV_REG_READ(SDRAM_SIZE_REG(0,target)); + baseReg = MV_REG_READ(SDRAM_BASE_ADDR_REG(0,target)); + + sizeRegVal = (sizeReg & SCSR_SIZE_MASK) >> SCSR_SIZE_OFFS; + + pAddrDecWin->addrWin.size = ctrlRegToSize(sizeRegVal, + SCSR_SIZE_ALIGNMENT); + + /* Check if ctrlRegToSize returned OK */ + if (-1 == pAddrDecWin->addrWin.size) + { + mvOsPrintf("mvDramIfWinGet: size of target %d is Illigal\n", target); + return MV_ERROR; + } + + /* Extract base address */ + /* Base register [31:16] ==> baseLow[31:16] */ + pAddrDecWin->addrWin.baseLow = baseReg & SCBAR_BASE_MASK; + + pAddrDecWin->addrWin.baseHigh = 0; + + + if (sizeReg & SCSR_WIN_EN) + { + pAddrDecWin->enable = MV_TRUE; + } + else + { + pAddrDecWin->enable = MV_FALSE; + } + + return MV_OK; +} +/******************************************************************************* +* mvDramIfWinEnable - Enable/Disable SDRAM address decode window +* +* DESCRIPTION: +* This function enable/Disable SDRAM address decode window. +* +* INPUT: +* target - System target. Use only SDRAM targets. +* +* OUTPUT: +* None. +* +* RETURN: +* MV_ERROR in case function parameter are invalid, MV_OK otherewise. +* +*******************************************************************************/ +MV_STATUS mvDramIfWinEnable(MV_TARGET target, MV_BOOL enable) +{ + MV_DRAM_DEC_WIN addrDecWin; + + /* Check parameters */ + if (!MV_TARGET_IS_DRAM(target)) + { + mvOsPrintf("mvDramIfWinEnable: target %d is Illigal\n", target); + return MV_ERROR; + } + + if (enable == MV_TRUE) + { /* First check for overlap with other enabled windows */ + if (MV_OK != mvDramIfWinGet(target, &addrDecWin)) + { + mvOsPrintf("mvDramIfWinEnable:ERR. Getting target %d failed.\n", + target); + return MV_ERROR; + } + /* Check for overlapping */ + if (MV_FALSE == sdramIfWinOverlap(target, &(addrDecWin.addrWin))) + { + /* No Overlap. Enable address decode winNum window */ + MV_REG_BIT_SET(SDRAM_SIZE_REG(0,target), SCSR_WIN_EN); + } + else + { /* Overlap detected */ + mvOsPrintf("mvDramIfWinEnable: ERR. Target %d overlap detect\n", + target); + return MV_ERROR; + } + } + else + { /* Disable address decode winNum window */ + MV_REG_BIT_RESET(SDRAM_SIZE_REG(0, target), SCSR_WIN_EN); + } + + return MV_OK; +} + +/******************************************************************************* +* sdramIfWinOverlap - Check if an address window overlap an SDRAM address window +* +* DESCRIPTION: +* This function scan each SDRAM address decode window to test if it +* overlapps the given address windoow +* +* INPUT: +* target - SDRAM target where the function skips checking. +* pAddrDecWin - The tested address window for overlapping with +* SDRAM windows. +* +* OUTPUT: +* None. +* +* RETURN: +* MV_TRUE if the given address window overlaps any enabled address +* decode map, MV_FALSE otherwise. +* +*******************************************************************************/ +static MV_BOOL sdramIfWinOverlap(MV_TARGET target, MV_ADDR_WIN *pAddrWin) +{ + MV_TARGET targetNum; + MV_DRAM_DEC_WIN addrDecWin; + + for(targetNum = SDRAM_CS0; targetNum < MV_DRAM_MAX_CS ; targetNum++) + { + /* don't check our winNum or illegal targets */ + if (targetNum == target) + { + continue; + } + + /* Get window parameters */ + if (MV_OK != mvDramIfWinGet(targetNum, &addrDecWin)) + { + mvOsPrintf("sdramIfWinOverlap: ERR. TargetWinGet failed\n"); + return MV_ERROR; + } + + /* Do not check disabled windows */ + if (MV_FALSE == addrDecWin.enable) + { + continue; + } + + if(MV_TRUE == ctrlWinOverlapTest(pAddrWin, &addrDecWin.addrWin)) + { + mvOsPrintf( + "sdramIfWinOverlap: Required target %d overlap winNum %d\n", + target, targetNum); + return MV_TRUE; + } + } + + return MV_FALSE; +} + diff --git a/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/kw_family/ctrlEnv/sys/mvSysDram.h b/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/kw_family/ctrlEnv/sys/mvSysDram.h new file mode 100644 index 0000000000..7bd9c9de27 --- /dev/null +++ b/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/kw_family/ctrlEnv/sys/mvSysDram.h @@ -0,0 +1,80 @@ +/******************************************************************************* +Copyright (C) Marvell International Ltd. and its affiliates + +This software file (the "File") is owned and distributed by Marvell +International Ltd. and/or its affiliates ("Marvell") under the following +alternative licensing terms. Once you have made an election to distribute the +File under one of the following license alternatives, please (i) delete this +introductory statement regarding license alternatives, (ii) delete the two +license alternatives that you have not elected to use and (iii) preserve the +Marvell copyright notice above. + +******************************************************************************** +Marvell Commercial License Option + +If you received this File from Marvell and you have entered into a commercial +license agreement (a "Commercial License") with Marvell, the File is licensed +to you under the terms of the applicable Commercial License. + +******************************************************************************** +Marvell GPL License Option + +If you received this File from Marvell, you may opt to use, redistribute and/or +modify this File in accordance with the terms and conditions of the General +Public License Version 2, June 1991 (the "GPL License"), a copy of which is +available along with the File in the license.txt file or by writing to the Free +Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or +on the worldwide web at http://www.gnu.org/licenses/gpl.txt. + +THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED +WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY +DISCLAIMED. The GPL License provides additional details about this warranty +disclaimer. +******************************************************************************** +Marvell BSD License Option + +If you received this File from Marvell, you may opt to use, redistribute and/or +modify this File under the following licensing terms. +Redistribution and use in source and binary forms, with or without modification, +are permitted provided that the following conditions are met: + + * Redistributions of source code must retain the above copyright notice, + this list of conditions and the following disclaimer. + + * Redistributions in binary form must reproduce the above copyright + notice, this list of conditions and the following disclaimer in the + documentation and/or other materials provided with the distribution. + + * Neither the name of Marvell nor the names of its contributors may be + used to endorse or promote products derived from this software without + specific prior written permission. + +THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND +ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED +WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE +DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR +ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES +(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; +LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON +ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS +SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + +*******************************************************************************/ + + +#ifndef __sysDram +#define __sysDram + +/* This structure describes CPU interface address decode window */ +typedef struct _mvDramIfDecWin +{ + MV_ADDR_WIN addrWin; /* An address window*/ + MV_BOOL enable; /* Address decode window is enabled/disabled */ +}MV_DRAM_DEC_WIN; + +MV_STATUS mvDramIfWinSet(MV_TARGET target, MV_DRAM_DEC_WIN *pAddrDecWin); +MV_STATUS mvDramIfWinGet(MV_TARGET target, MV_DRAM_DEC_WIN *pAddrDecWin); +MV_STATUS mvDramIfWinEnable(MV_TARGET target, MV_BOOL enable); + +#endif diff --git a/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/kw_family/ctrlEnv/sys/mvSysGbe.c b/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/kw_family/ctrlEnv/sys/mvSysGbe.c new file mode 100644 index 0000000000..7f6e4a59dd --- /dev/null +++ b/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/kw_family/ctrlEnv/sys/mvSysGbe.c @@ -0,0 +1,658 @@ +/******************************************************************************* +Copyright (C) Marvell International Ltd. and its affiliates + +This software file (the "File") is owned and distributed by Marvell +International Ltd. and/or its affiliates ("Marvell") under the following +alternative licensing terms. Once you have made an election to distribute the +File under one of the following license alternatives, please (i) delete this +introductory statement regarding license alternatives, (ii) delete the two +license alternatives that you have not elected to use and (iii) preserve the +Marvell copyright notice above. + +******************************************************************************** +Marvell Commercial License Option + +If you received this File from Marvell and you have entered into a commercial +license agreement (a "Commercial License") with Marvell, the File is licensed +to you under the terms of the applicable Commercial License. + +******************************************************************************** +Marvell GPL License Option + +If you received this File from Marvell, you may opt to use, redistribute and/or +modify this File in accordance with the terms and conditions of the General +Public License Version 2, June 1991 (the "GPL License"), a copy of which is +available along with the File in the license.txt file or by writing to the Free +Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or +on the worldwide web at http://www.gnu.org/licenses/gpl.txt. + +THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED +WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY +DISCLAIMED. The GPL License provides additional details about this warranty +disclaimer. +******************************************************************************** +Marvell BSD License Option + +If you received this File from Marvell, you may opt to use, redistribute and/or +modify this File under the following licensing terms. +Redistribution and use in source and binary forms, with or without modification, +are permitted provided that the following conditions are met: + + * Redistributions of source code must retain the above copyright notice, + this list of conditions and the following disclaimer. + + * Redistributions in binary form must reproduce the above copyright + notice, this list of conditions and the following disclaimer in the + documentation and/or other materials provided with the distribution. + + * Neither the name of Marvell nor the names of its contributors may be + used to endorse or promote products derived from this software without + specific prior written permission. + +THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND +ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED +WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE +DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR +ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES +(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; +LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON +ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS +SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + +*******************************************************************************/ + + +#include "ctrlEnv/sys/mvSysGbe.h" + + + +typedef struct _mvEthDecWin +{ + MV_TARGET target; + MV_ADDR_WIN addrWin; /* An address window*/ + MV_BOOL enable; /* Address decode window is enabled/disabled */ + +}MV_ETH_DEC_WIN; + +MV_TARGET ethAddrDecPrioTap[] = +{ +#if defined(MV_INCLUDE_SDRAM_CS0) + SDRAM_CS0, +#endif +#if defined(MV_INCLUDE_SDRAM_CS1) + SDRAM_CS1, +#endif +#if defined(MV_INCLUDE_SDRAM_CS2) + SDRAM_CS2, +#endif +#if defined(MV_INCLUDE_SDRAM_CS3) + SDRAM_CS3, +#endif +#if defined(MV_INCLUDE_DEVICE_CS0) + DEVICE_CS0, +#endif +#if defined(MV_INCLUDE_DEVICE_CS1) + DEVICE_CS1, +#endif +#if defined(MV_INCLUDE_DEVICE_CS2) + DEVICE_CS2, +#endif +#if defined(MV_INCLUDE_DEVICE_CS3) + DEVICE_CS3, +#endif +#if defined(MV_INCLUDE_PEX) + PEX0_IO, +#endif + TBL_TERM +}; + +static MV_STATUS ethWinOverlapDetect(int port, MV_U32 winNum, MV_ADDR_WIN *pAddrWin); +static MV_STATUS mvEthWinSet(int port, MV_U32 winNum, MV_ETH_DEC_WIN *pAddrDecWin); +static MV_STATUS mvEthWinGet(int port, MV_U32 winNum, MV_ETH_DEC_WIN *pAddrDecWin); + + +/******************************************************************************* +* mvEthWinInit - Initialize ETH address decode windows +* +* DESCRIPTION: +* This function initialize ETH window decode unit. It set the +* default address decode windows of the unit. +* +* INPUT: +* None. +* +* OUTPUT: +* None. +* +* RETURN: +* MV_ERROR if setting fail. +*******************************************************************************/ +/* Configure EthDrv memory map registes. */ +MV_STATUS mvEthWinInit (int port) +{ + MV_U32 winNum, status, winPrioIndex=0, i, regVal=0; + MV_ETH_DEC_WIN ethWin; + MV_CPU_DEC_WIN cpuAddrDecWin; + static MV_U32 accessProtReg = 0; + +#if (MV_ETH_VERSION <= 1) + static MV_BOOL isFirst = MV_TRUE; + + if(isFirst == MV_FALSE) + { + MV_REG_WRITE(ETH_ACCESS_PROTECT_REG(port), accessProtReg); + return MV_OK; + } + isFirst = MV_FALSE; +#endif /* MV_GIGA_ETH_VERSION */ + + /* Initiate Ethernet address decode */ + + /* First disable all address decode windows */ + for(winNum=0; winNum= ETH_MAX_DECODE_WIN) + { + mvOsPrintf("mvEthWinSet: ERR. Invalid win num %d\n",winNum); + return MV_BAD_PARAM; + } + + /* Check if the requested window overlapps with current windows */ + if (MV_TRUE == ethWinOverlapDetect(port, winNum, &pAddrDecWin->addrWin)) + { + mvOsPrintf("mvEthWinSet: ERR. Window %d overlap\n", winNum); + return MV_ERROR; + } + + /* check if address is aligned to the size */ + if(MV_IS_NOT_ALIGN(pAddrDecWin->addrWin.baseLow, pAddrDecWin->addrWin.size)) + { + mvOsPrintf("mvEthWinSet: Error setting Ethernet window %d to "\ + "target %s.\nAddress 0x%08x is unaligned to size 0x%x.\n", + winNum, + mvCtrlTargetNameGet(pAddrDecWin->target), + pAddrDecWin->addrWin.baseLow, + pAddrDecWin->addrWin.size); + return MV_ERROR; + } + + + decRegs.baseReg = MV_REG_READ(ETH_WIN_BASE_REG(port, winNum)); + decRegs.sizeReg = MV_REG_READ(ETH_WIN_SIZE_REG(port, winNum)); + + if (MV_OK != mvCtrlAddrDecToReg(&(pAddrDecWin->addrWin),&decRegs)) + { + mvOsPrintf("mvEthWinSet:mvCtrlAddrDecToReg Failed\n"); + return MV_ERROR; + } + + mvCtrlAttribGet(pAddrDecWin->target,&targetAttribs); + + /* set attributes */ + decRegs.baseReg &= ~ETH_WIN_ATTR_MASK; + decRegs.baseReg |= targetAttribs.attrib << ETH_WIN_ATTR_OFFS; + /* set target ID */ + decRegs.baseReg &= ~ETH_WIN_TARGET_MASK; + decRegs.baseReg |= targetAttribs.targetId << ETH_WIN_TARGET_OFFS; + + /* for the safe side we disable the window before writing the new + values */ + mvEthWinEnable(port, winNum, MV_FALSE); + MV_REG_WRITE(ETH_WIN_BASE_REG(port, winNum), decRegs.baseReg); + + /* Write to address decode Size Register */ + MV_REG_WRITE(ETH_WIN_SIZE_REG(port, winNum), decRegs.sizeReg); + + /* Enable address decode target window */ + if (pAddrDecWin->enable == MV_TRUE) + { + mvEthWinEnable(port, winNum, MV_TRUE); + } + + return MV_OK; +} + +/******************************************************************************* +* mvETHWinGet - Get dma peripheral target address window. +* +* DESCRIPTION: +* Get ETH peripheral target address window. +* +* INPUT: +* winNum - ETH to target address decode window number. +* +* OUTPUT: +* pAddrDecWin - ETH target window data structure. +* +* RETURN: +* MV_ERROR if register parameters are invalid. +* +*******************************************************************************/ +MV_STATUS mvEthWinGet(int port, MV_U32 winNum, MV_ETH_DEC_WIN *pAddrDecWin) +{ + MV_DEC_REGS decRegs; + MV_TARGET_ATTRIB targetAttrib; + + /* Parameter checking */ + if (winNum >= ETH_MAX_DECODE_WIN) + { + mvOsPrintf("mvEthWinGet: ERR. Invalid winNum %d\n", winNum); + return MV_NOT_SUPPORTED; + } + + decRegs.baseReg = MV_REG_READ(ETH_WIN_BASE_REG(port, winNum)); + decRegs.sizeReg = MV_REG_READ(ETH_WIN_SIZE_REG(port, winNum)); + + if (MV_OK != mvCtrlRegToAddrDec(&decRegs,&(pAddrDecWin->addrWin))) + { + mvOsPrintf("mvAhbToMbusWinGet: mvCtrlRegToAddrDec Failed \n"); + return MV_ERROR; + } + + /* attrib and targetId */ + targetAttrib.attrib = + (decRegs.baseReg & ETH_WIN_ATTR_MASK) >> ETH_WIN_ATTR_OFFS; + targetAttrib.targetId = + (decRegs.baseReg & ETH_WIN_TARGET_MASK) >> ETH_WIN_TARGET_OFFS; + + pAddrDecWin->target = mvCtrlTargetGet(&targetAttrib); + + /* Check if window is enabled */ + if (~(MV_REG_READ(ETH_BASE_ADDR_ENABLE_REG(port))) & (1 << winNum) ) + { + pAddrDecWin->enable = MV_TRUE; + } + else + { + pAddrDecWin->enable = MV_FALSE; + } + + return MV_OK; +} + +/******************************************************************************* +* mvEthWinEnable - Enable/disable a ETH to target address window +* +* DESCRIPTION: +* This function enable/disable a ETH to target address window. +* According to parameter 'enable' the routine will enable the +* window, thus enabling ETH accesses (before enabling the window it is +* tested for overlapping). Otherwise, the window will be disabled. +* +* INPUT: +* winNum - ETH to target address decode window number. +* enable - Enable/disable parameter. +* +* OUTPUT: +* N/A +* +* RETURN: +* MV_ERROR if decode window number was wrong or enabled window overlapps. +* +*******************************************************************************/ +MV_STATUS mvEthWinEnable(int port, MV_U32 winNum,MV_BOOL enable) +{ + MV_ETH_DEC_WIN addrDecWin; + + /* Parameter checking */ + if (winNum >= ETH_MAX_DECODE_WIN) + { + mvOsPrintf("mvEthTargetWinEnable:ERR. Invalid winNum%d\n",winNum); + return MV_ERROR; + } + + if (enable == MV_TRUE) + { /* First check for overlap with other enabled windows */ + /* Get current window */ + if (MV_OK != mvEthWinGet(port, winNum, &addrDecWin)) + { + mvOsPrintf("mvEthTargetWinEnable:ERR. targetWinGet fail\n"); + return MV_ERROR; + } + /* Check for overlapping */ + if (MV_FALSE == ethWinOverlapDetect(port, winNum, &(addrDecWin.addrWin))) + { + /* No Overlap. Enable address decode target window */ + MV_REG_BIT_RESET(ETH_BASE_ADDR_ENABLE_REG(port), (1 << winNum)); + } + else + { /* Overlap detected */ + mvOsPrintf("mvEthTargetWinEnable:ERR. Overlap detected\n"); + return MV_ERROR; + } + } + else + { /* Disable address decode target window */ + MV_REG_BIT_SET(ETH_BASE_ADDR_ENABLE_REG(port), (1 << winNum)); + } + return MV_OK; +} + +/******************************************************************************* +* mvEthWinTargetGet - Get Window number associated with target +* +* DESCRIPTION: +* +* INPUT: +* +* OUTPUT: +* +* RETURN: +* window number +* +*******************************************************************************/ +MV_U32 mvEthWinTargetGet(int port, MV_TARGET target) +{ + MV_ETH_DEC_WIN decWin; + MV_U32 winNum; + + /* Check parameters */ + if (target >= MAX_TARGETS) + { + mvOsPrintf("mvAhbToMbusWinTargetGet: target %d is Illigal\n", target); + return 0xffffffff; + } + + for (winNum=0; winNum= mvCtrlEthMaxPortGet()) + { + mvOsPrintf("mvEthProtWinSet:ERR. Invalid port number %d\n", portNo); + return MV_ERROR; + } + + if (winNum >= ETH_MAX_DECODE_WIN) + { + mvOsPrintf("mvEthProtWinSet:ERR. Invalid winNum%d\n",winNum); + return MV_ERROR; + } + + if((access == ACC_RESERVED) || (access >= MAX_ACC_RIGHTS)) + { + mvOsPrintf("mvEthProtWinSet:ERR. Inv access param %d\n", access); + return MV_ERROR; + } + /* Read current protection register */ + protReg = MV_REG_READ(ETH_ACCESS_PROTECT_REG(portNo)); + + /* Clear protection window field */ + protReg &= ~(ETH_PROT_WIN_MASK(winNum)); + + /* Set new protection field value */ + protReg |= (access << (ETH_PROT_WIN_OFFS(winNum))); + + /* Write protection register back */ + MV_REG_WRITE(ETH_ACCESS_PROTECT_REG(portNo), protReg); + + return MV_OK; +} + +/******************************************************************************* +* ethWinOverlapDetect - Detect ETH address windows overlapping +* +* DESCRIPTION: +* An unpredicted behaviur is expected in case ETH address decode +* windows overlapps. +* This function detects ETH address decode windows overlapping of a +* specified window. The function does not check the window itself for +* overlapping. The function also skipps disabled address decode windows. +* +* INPUT: +* winNum - address decode window number. +* pAddrDecWin - An address decode window struct. +* +* OUTPUT: +* None. +* +* RETURN: +* MV_TRUE if the given address window overlap current address +* decode map, MV_FALSE otherwise, MV_ERROR if reading invalid data +* from registers. +* +*******************************************************************************/ +static MV_STATUS ethWinOverlapDetect(int port, MV_U32 winNum, MV_ADDR_WIN *pAddrWin) +{ + MV_U32 baseAddrEnableReg; + MV_U32 winNumIndex; + MV_ETH_DEC_WIN addrDecWin; + + /* Read base address enable register. Do not check disabled windows */ + baseAddrEnableReg = MV_REG_READ(ETH_BASE_ADDR_ENABLE_REG(port)); + + for (winNumIndex=0; winNumIndex= mvCtrlPexMaxIfGet()) + { + mvOsPrintf("mvPexInit: ERR. Invalid PEX interface %d\n", pexIf); + return MV_BAD_PARAM; + } + + /* Enabled CPU access to PCI-Express */ + mvCpuIfEnablePex(pexIf, pexType); + + /* Start with bars */ + /* First disable all PEX bars*/ + for (bar = 0; bar < PEX_MAX_BARS; bar++) + { + if (PEX_INTER_REGS_BAR != bar) + { + if (MV_OK != mvPexBarEnable(pexIf, bar, MV_FALSE)) + { + mvOsPrintf("mvPexInit:mvPexBarEnable bar =%d failed \n",bar); + return MV_ERROR; + } + + } + + } + + /* and disable all PEX target windows */ + for (winNum = 0; winNum < PEX_MAX_TARGET_WIN - 2; winNum++) + { + if (MV_OK != mvPexTargetWinEnable(pexIf, winNum, MV_FALSE)) + { + mvOsPrintf("mvPexInit:mvPexTargetWinEnable winNum =%d failed \n", + winNum); + return MV_ERROR; + + } + } + + /* Now, go through all bars*/ + + + +/******************************************************************************/ +/* Internal registers bar */ +/******************************************************************************/ + bar = PEX_INTER_REGS_BAR; + + /* we only open the bar , no need to open windows for this bar */ + + /* first get the CS attribute from the CPU Interface */ + if (MV_OK !=mvCpuIfTargetWinGet(INTER_REGS,&addrDecWin)) + { + mvOsPrintf("mvPexInit: ERR. mvCpuIfTargetWinGet failed target =%d\n",INTER_REGS); + return MV_ERROR; + } + + pexBar.addrWin.baseHigh = addrDecWin.addrWin.baseHigh; + pexBar.addrWin.baseLow = addrDecWin.addrWin.baseLow; + pexBar.addrWin.size = addrDecWin.addrWin.size; + pexBar.enable = MV_TRUE; + + if (MV_OK != mvPexBarSet(pexIf, bar, &pexBar)) + { + mvOsPrintf("mvPexInit: ERR. mvPexBarSet %d failed\n", bar); + return MV_ERROR; + } + +/******************************************************************************/ +/* DRAM bar */ +/******************************************************************************/ + + bar = PEX_DRAM_BAR; + + pexBar.addrWin.size = 0; + + for (target = SDRAM_CS0;target < MV_DRAM_MAX_CS; target++ ) + { + + status = mvCpuIfTargetWinGet(target,&addrDecWin); + + if((MV_NO_SUCH == status)&&(target != SDRAM_CS0)) + { + continue; + } + + /* first get attributes from CPU If */ + if (MV_OK != status) + { + mvOsPrintf("mvPexInit: ERR. mvCpuIfTargetWinGet failed target =%d\n",target); + return MV_ERROR; + } + if (addrDecWin.enable == MV_TRUE) + { + /* the base is the base of DRAM CS0 always */ + if (SDRAM_CS0 == target ) + { + pexBar.addrWin.baseHigh = addrDecWin.addrWin.baseHigh; + pexBar.addrWin.baseLow = addrDecWin.addrWin.baseLow; + + } + + /* increment the bar size to be the sum of the size of all + DRAM chips selecs */ + pexBar.addrWin.size += addrDecWin.addrWin.size; + + /* set a Pex window for this target ! + DRAM CS always will have a Pex Window , and is not a + part of the priority table */ + pexWin.addrWin.baseHigh = addrDecWin.addrWin.baseHigh; + pexWin.addrWin.baseLow = addrDecWin.addrWin.baseLow; + pexWin.addrWin.size = addrDecWin.addrWin.size; + + /* we disable the windows at first because we are not + sure that it is witihin bar boundries */ + pexWin.enable =MV_FALSE; + pexWin.target = target; + pexWin.targetBar = bar; + + if (MV_OK != mvPexTargetWinSet(pexIf,pexCurrWin++,&pexWin)) + { + mvOsPrintf("mvPexInit: ERR. mvPexTargetWinSet failed\n"); + return MV_ERROR; + } + } + } + + /* check if the size of the bar is illeggal */ + if (-1 == ctrlSizeToReg(pexBar.addrWin.size, PXBCR_BAR_SIZE_ALIGNMENT)) + { + /* try to get a good size */ + pexBar.addrWin.size = ctrlSizeRegRoundUp(pexBar.addrWin.size, + PXBCR_BAR_SIZE_ALIGNMENT); + } + + /* check if the size and base are valid */ + if (MV_TRUE == pexBarOverlapDetect(pexIf,bar,&pexBar.addrWin)) + { + mvOsPrintf("mvPexInit:Warning :Bar %d size is illigal\n",bar); + mvOsPrintf("it will be disabled\n"); + mvOsPrintf("please check Pex and CPU windows configuration\n"); + } + else + { + pexBar.enable = MV_TRUE; + + /* configure the bar */ + if (MV_OK != mvPexBarSet(pexIf, bar, &pexBar)) + { + mvOsPrintf("mvPexInit: ERR. mvPexBarSet %d failed\n", bar); + return MV_ERROR; + } + + /* after the bar was configured then we enable the Pex windows*/ + for (winNum = 0;winNum < pexCurrWin ;winNum++) + { + if (MV_OK != mvPexTargetWinEnable(pexIf, winNum, MV_TRUE)) + { + mvOsPrintf("mvPexInit: Can't enable window =%d\n",winNum); + return MV_ERROR; + } + + } + } + +/******************************************************************************/ +/* DEVICE bar */ +/******************************************************************************/ + +/* Open the Device BAR for non linux only */ +#ifndef MV_DISABLE_PEX_DEVICE_BAR + + /* then device bar*/ + bar = PEX_DEVICE_BAR; + + /* save the starting window */ + pexStartWindow = pexCurrWin; + pexBar.addrWin.size = 0; + pexBar.addrWin.baseLow = 0xffffffff; + pexBar.addrWin.baseHigh = 0; + maxBase = 0; + + for (target = DEV_TO_TARGET(START_DEV_CS);target < DEV_TO_TARGET(MV_DEV_MAX_CS); target++ ) + { + status = mvCpuIfTargetWinGet(target,&addrDecWin); + + if (MV_NO_SUCH == status) + { + continue; + } + + if (MV_OK != status) + { + mvOsPrintf("mvPexInit: ERR. mvCpuIfTargetWinGet failed target =%d\n",target); + return MV_ERROR; + } + + if (addrDecWin.enable == MV_TRUE) + { + /* get the minimum base */ + if (addrDecWin.addrWin.baseLow < pexBar.addrWin.baseLow) + { + pexBar.addrWin.baseLow = addrDecWin.addrWin.baseLow; + } + + /* get the maximum base */ + if (addrDecWin.addrWin.baseLow > maxBase) + { + maxBase = addrDecWin.addrWin.baseLow; + sizeOfMaxBase = addrDecWin.addrWin.size; + } + + /* search in the priority table for this target */ + for (winIndex = 0; pexDevBarPrioTable[winIndex] != TBL_TERM; + winIndex++) + { + if (pexDevBarPrioTable[winIndex] != target) + { + continue; + } + else if (pexDevBarPrioTable[winIndex] == target) + { + /*found it */ + + /* if the index of this target in the prio table is valid + then we set the Pex window for this target, a valid index is + an index that is lower than the number of the windows that + was not configured yet */ + + /* we subtract 2 always because the default and expantion + rom windows are always configured */ + if ( pexCurrWin < PEX_MAX_TARGET_WIN - 2) + { + /* set a Pex window for this target ! */ + pexWin.addrWin.baseHigh = addrDecWin.addrWin.baseHigh; + pexWin.addrWin.baseLow = addrDecWin.addrWin.baseLow; + pexWin.addrWin.size = addrDecWin.addrWin.size; + + /* we disable the windows at first because we are not + sure that it is witihin bar boundries */ + pexWin.enable = MV_FALSE; + pexWin.target = target; + pexWin.targetBar = bar; + + if (MV_OK != mvPexTargetWinSet(pexIf,pexCurrWin++, + &pexWin)) + { + mvOsPrintf("mvPexInit: ERR. Window Set failed\n"); + return MV_ERROR; + } + } + } + } + } + } + + pexBar.addrWin.size = maxBase - pexBar.addrWin.baseLow + sizeOfMaxBase; + pexBar.enable = MV_TRUE; + + /* check if the size of the bar is illegal */ + if (-1 == ctrlSizeToReg(pexBar.addrWin.size, PXBCR_BAR_SIZE_ALIGNMENT)) + { + /* try to get a good size */ + pexBar.addrWin.size = ctrlSizeRegRoundUp(pexBar.addrWin.size, + PXBCR_BAR_SIZE_ALIGNMENT); + } + + /* check if the size and base are valid */ + if (MV_TRUE == pexBarOverlapDetect(pexIf,bar,&pexBar.addrWin)) + { + mvOsPrintf("mvPexInit:Warning :Bar %d size is illigal\n",bar); + mvOsPrintf("it will be disabled\n"); + mvOsPrintf("please check Pex and CPU windows configuration\n"); + } + else + { + if (MV_OK != mvPexBarSet(pexIf, bar, &pexBar)) + { + mvOsPrintf("mvPexInit: ERR. mvPexBarSet %d failed\n", bar); + return MV_ERROR; + } + + /* now enable the windows */ + for (winNum = pexStartWindow; winNum < pexCurrWin ; winNum++) + { + if (MV_OK != mvPexTargetWinEnable(pexIf, winNum, MV_TRUE)) + { + mvOsPrintf("mvPexInit:mvPexTargetWinEnable winNum =%d failed \n", + winNum); + return MV_ERROR; + } + } + } + +#endif + + return mvPexHalInit(pexIf, pexType); + +} + +/******************************************************************************* +* mvPexTargetWinSet - Set PEX to peripheral target address window BAR +* +* DESCRIPTION: +* +* INPUT: +* +* OUTPUT: +* N/A +* +* RETURN: +* MV_OK if PEX BAR target window was set correctly, +* MV_BAD_PARAM on bad params +* MV_ERROR otherwise +* (e.g. address window overlapps with other active PEX target window). +* +*******************************************************************************/ +MV_STATUS mvPexTargetWinSet(MV_U32 pexIf, MV_U32 winNum, + MV_PEX_DEC_WIN *pAddrDecWin) +{ + + MV_DEC_REGS decRegs; + PEX_WIN_REG_INFO winRegInfo; + MV_TARGET_ATTRIB targetAttribs; + + /* Parameter checking */ + if(pexIf >= mvCtrlPexMaxIfGet()) + { + mvOsPrintf("mvPexTargetWinSet: ERR. Invalid PEX interface %d\n", pexIf); + return MV_BAD_PARAM; + } + + if (winNum >= PEX_MAX_TARGET_WIN) + { + mvOsPrintf("mvPexTargetWinSet: ERR. Invalid PEX winNum %d\n", winNum); + return MV_BAD_PARAM; + + } + + /* get the pex Window registers offsets */ + pexWinRegInfoGet(pexIf,winNum,&winRegInfo); + + + if (MV_TRUE == pAddrDecWin->enable) + { + + /* 2) Check if the requested window overlaps with current windows */ + if (MV_TRUE == pexWinOverlapDetect(pexIf,winNum, &pAddrDecWin->addrWin)) + { + mvOsPrintf("mvPexTargetWinSet: ERR. Target %d overlap\n", winNum); + return MV_BAD_PARAM; + } + + /* 2) Check if the requested window overlaps with current windows */ + if (MV_FALSE == pexIsWinWithinBar(pexIf,&pAddrDecWin->addrWin)) + { + mvOsPrintf("mvPexTargetWinSet: Win %d should be in bar boundries\n", + winNum); + return MV_BAD_PARAM; + } + + } + + + + /* read base register*/ + + if (winRegInfo.baseLowRegOffs) + { + decRegs.baseReg = MV_REG_READ(winRegInfo.baseLowRegOffs); + } + else + { + decRegs.baseReg = 0; + } + + if (winRegInfo.sizeRegOffs) + { + decRegs.sizeReg = MV_REG_READ(winRegInfo.sizeRegOffs); + } + else + { + decRegs.sizeReg =0; + } + + if (MV_OK != mvCtrlAddrDecToReg(&(pAddrDecWin->addrWin),&decRegs)) + { + mvOsPrintf("mvPexTargetWinSet:mvCtrlAddrDecToReg Failed\n"); + return MV_ERROR; + } + + /* enable\Disable */ + if (MV_TRUE == pAddrDecWin->enable) + { + decRegs.sizeReg |= PXWCR_WIN_EN; + } + else + { + decRegs.sizeReg &= ~PXWCR_WIN_EN; + } + + + /* clear bit location */ + decRegs.sizeReg &= ~PXWCR_WIN_BAR_MAP_MASK; + + /* set bar Mapping */ + if (pAddrDecWin->targetBar == 1) + { + decRegs.sizeReg |= PXWCR_WIN_BAR_MAP_BAR1; + } + else if (pAddrDecWin->targetBar == 2) + { + decRegs.sizeReg |= PXWCR_WIN_BAR_MAP_BAR2; + } + + mvCtrlAttribGet(pAddrDecWin->target,&targetAttribs); + + /* set attributes */ + decRegs.sizeReg &= ~PXWCR_ATTRIB_MASK; + decRegs.sizeReg |= targetAttribs.attrib << PXWCR_ATTRIB_OFFS; + /* set target ID */ + decRegs.sizeReg &= ~PXWCR_TARGET_MASK; + decRegs.sizeReg |= targetAttribs.targetId << PXWCR_TARGET_OFFS; + + + /* 3) Write to address decode Base Address Register */ + + if (winRegInfo.baseLowRegOffs) + { + MV_REG_WRITE(winRegInfo.baseLowRegOffs, decRegs.baseReg); + } + + /* write size reg */ + if (winRegInfo.sizeRegOffs) + { + if ((MV_PEX_WIN_DEFAULT == winNum)|| + (MV_PEX_WIN_EXP_ROM == winNum)) + { + /* clear size because there is no size field*/ + decRegs.sizeReg &= ~PXWCR_SIZE_MASK; + + /* clear enable because there is no enable field*/ + decRegs.sizeReg &= ~PXWCR_WIN_EN; + + } + + MV_REG_WRITE(winRegInfo.sizeRegOffs, decRegs.sizeReg); + } + + + return MV_OK; + +} + +/******************************************************************************* +* mvPexTargetWinGet - Get PEX to peripheral target address window +* +* DESCRIPTION: +* Get the PEX to peripheral target address window BAR. +* +* INPUT: +* pexIf - PEX interface number. +* bar - BAR to be accessed by slave. +* +* OUTPUT: +* pAddrBarWin - PEX target window information data structure. +* +* RETURN: +* MV_BAD_PARAM for bad parameters ,MV_ERROR on error ! otherwise MV_OK +* +*******************************************************************************/ +MV_STATUS mvPexTargetWinGet(MV_U32 pexIf, MV_U32 winNum, + MV_PEX_DEC_WIN *pAddrDecWin) +{ + MV_TARGET_ATTRIB targetAttrib; + MV_DEC_REGS decRegs; + + PEX_WIN_REG_INFO winRegInfo; + + /* Parameter checking */ + if(pexIf >= mvCtrlPexMaxIfGet()) + { + mvOsPrintf("mvPexTargetWinGet: ERR. Invalid PEX interface %d\n", pexIf); + return MV_BAD_PARAM; + } + + if (winNum >= PEX_MAX_TARGET_WIN) + { + mvOsPrintf("mvPexTargetWinGet: ERR. Invalid PEX winNum %d\n", winNum); + return MV_BAD_PARAM; + + } + + /* get the pex Window registers offsets */ + pexWinRegInfoGet(pexIf,winNum,&winRegInfo); + + /* read base register*/ + if (winRegInfo.baseLowRegOffs) + { + decRegs.baseReg = MV_REG_READ(winRegInfo.baseLowRegOffs); + } + else + { + decRegs.baseReg = 0; + } + + /* read size reg */ + if (winRegInfo.sizeRegOffs) + { + decRegs.sizeReg = MV_REG_READ(winRegInfo.sizeRegOffs); + } + else + { + decRegs.sizeReg =0; + } + + if (MV_OK != mvCtrlRegToAddrDec(&decRegs,&(pAddrDecWin->addrWin))) + { + mvOsPrintf("mvPexTargetWinGet: mvCtrlRegToAddrDec Failed \n"); + return MV_ERROR; + + } + + if (decRegs.sizeReg & PXWCR_WIN_EN) + { + pAddrDecWin->enable = MV_TRUE; + } + else + { + pAddrDecWin->enable = MV_FALSE; + + } + + + #if 0 + if (-1 == pAddrDecWin->addrWin.size) + { + return MV_ERROR; + } + #endif + + + /* get target bar */ + if ((decRegs.sizeReg & PXWCR_WIN_BAR_MAP_MASK) == PXWCR_WIN_BAR_MAP_BAR1 ) + { + pAddrDecWin->targetBar = 1; + } + else if ((decRegs.sizeReg & PXWCR_WIN_BAR_MAP_MASK) == + PXWCR_WIN_BAR_MAP_BAR2 ) + { + pAddrDecWin->targetBar = 2; + } + + /* attrib and targetId */ + pAddrDecWin->attrib = (decRegs.sizeReg & PXWCR_ATTRIB_MASK) >> + PXWCR_ATTRIB_OFFS; + pAddrDecWin->targetId = (decRegs.sizeReg & PXWCR_TARGET_MASK) >> + PXWCR_TARGET_OFFS; + + targetAttrib.attrib = pAddrDecWin->attrib; + targetAttrib.targetId = pAddrDecWin->targetId; + + pAddrDecWin->target = mvCtrlTargetGet(&targetAttrib); + + return MV_OK; + +} + + +/******************************************************************************* +* mvPexTargetWinEnable - Enable/disable a PEX BAR window +* +* DESCRIPTION: +* This function enable/disable a PEX BAR window. +* if parameter 'enable' == MV_TRUE the routine will enable the +* window, thus enabling PEX accesses for that BAR (before enabling the +* window it is tested for overlapping). Otherwise, the window will +* be disabled. +* +* INPUT: +* pexIf - PEX interface number. +* bar - BAR to be accessed by slave. +* enable - Enable/disable parameter. +* +* OUTPUT: +* None. +* +* RETURN: +* MV_BAD_PARAM for bad parameters ,MV_ERROR on error ! otherwise MV_OK +* +*******************************************************************************/ +MV_STATUS mvPexTargetWinEnable(MV_U32 pexIf,MV_U32 winNum, MV_BOOL enable) +{ + PEX_WIN_REG_INFO winRegInfo; + MV_PEX_DEC_WIN addrDecWin; + + /* Parameter checking */ + if(pexIf >= mvCtrlPexMaxIfGet()) + { + mvOsPrintf("mvPexTargetWinEnable: ERR. Invalid PEX If %d\n", pexIf); + return MV_BAD_PARAM; + } + + if (winNum >= PEX_MAX_TARGET_WIN) + { + mvOsPrintf("mvPexTargetWinEnable ERR. Invalid PEX winNum %d\n", winNum); + return MV_BAD_PARAM; + + } + + + /* get the pex Window registers offsets */ + pexWinRegInfoGet(pexIf,winNum,&winRegInfo); + + + /* if the address windows is disabled , we only disable the appropriare + pex window and ignore other settings */ + + if (MV_FALSE == enable) + { + + /* this is not relevant to default and expantion rom + windows */ + if (winRegInfo.sizeRegOffs) + { + if ((MV_PEX_WIN_DEFAULT != winNum)&& + (MV_PEX_WIN_EXP_ROM != winNum)) + { + MV_REG_BIT_RESET(winRegInfo.sizeRegOffs, PXWCR_WIN_EN); + } + } + + } + else + { + if (MV_OK != mvPexTargetWinGet(pexIf,winNum, &addrDecWin)) + { + mvOsPrintf("mvPexTargetWinEnable: mvPexTargetWinGet Failed\n"); + return MV_ERROR; + } + + /* Check if the requested window overlaps with current windows */ + if (MV_TRUE == pexWinOverlapDetect(pexIf,winNum, &addrDecWin.addrWin)) + { + mvOsPrintf("mvPexTargetWinEnable: ERR. Target %d overlap\n", winNum); + return MV_BAD_PARAM; + } + + if (MV_FALSE == pexIsWinWithinBar(pexIf,&addrDecWin.addrWin)) + { + mvOsPrintf("mvPexTargetWinEnable: Win %d should be in bar boundries\n", + winNum); + return MV_BAD_PARAM; + } + + + /* this is not relevant to default and expantion rom + windows */ + if (winRegInfo.sizeRegOffs) + { + if ((MV_PEX_WIN_DEFAULT != winNum)&& + (MV_PEX_WIN_EXP_ROM != winNum)) + { + MV_REG_BIT_SET(winRegInfo.sizeRegOffs, PXWCR_WIN_EN); + } + } + + + } + + return MV_OK; + +} + + + +/******************************************************************************* +* mvPexTargetWinRemap - Set PEX to target address window remap. +* +* DESCRIPTION: +* The PEX interface supports remap of the BAR original address window. +* For each BAR it is possible to define a remap address. For example +* an address 0x12345678 that hits BAR 0x10 (SDRAM CS[0]) will be modified +* according to remap register but will also be targeted to the +* SDRAM CS[0]. +* +* INPUT: +* pexIf - PEX interface number. +* bar - Peripheral target enumerator accessed by slave. +* pAddrWin - Address window to be checked. +* +* OUTPUT: +* None. +* +* RETURN: +* MV_BAD_PARAM for bad parameters ,MV_ERROR on error ! otherwise MV_OK +* +*******************************************************************************/ +MV_STATUS mvPexTargetWinRemap(MV_U32 pexIf, MV_U32 winNum, + MV_PEX_REMAP_WIN *pAddrWin) +{ + + PEX_WIN_REG_INFO winRegInfo; + + /* Parameter checking */ + if (pexIf >= mvCtrlPexMaxIfGet()) + { + mvOsPrintf("mvPexTargetWinRemap: ERR. Invalid PEX interface num %d\n", + pexIf); + return MV_BAD_PARAM; + } + if (MV_PEX_WIN_DEFAULT == winNum) + { + mvOsPrintf("mvPexTargetWinRemap: ERR. Invalid PEX win num %d\n", + winNum); + return MV_BAD_PARAM; + + } + + if (MV_IS_NOT_ALIGN(pAddrWin->addrWin.baseLow, PXWRR_REMAP_ALIGNMENT)) + { + mvOsPrintf("mvPexTargetWinRemap: Error remap PEX interface %d win %d."\ + "\nAddress 0x%08x is unaligned to size 0x%x.\n", + pexIf, + winNum, + pAddrWin->addrWin.baseLow, + pAddrWin->addrWin.size); + + return MV_ERROR; + } + + pexWinRegInfoGet(pexIf, winNum, &winRegInfo); + + /* Set remap low register value */ + MV_REG_WRITE(winRegInfo.remapLowRegOffs, pAddrWin->addrWin.baseLow); + + /* Skip base high settings if the BAR has only base low (32-bit) */ + if (0 != winRegInfo.remapHighRegOffs) + { + MV_REG_WRITE(winRegInfo.remapHighRegOffs, pAddrWin->addrWin.baseHigh); + } + + + if (pAddrWin->enable == MV_TRUE) + { + MV_REG_BIT_SET(winRegInfo.remapLowRegOffs,PXWRR_REMAP_EN); + } + else + { + MV_REG_BIT_RESET(winRegInfo.remapLowRegOffs,PXWRR_REMAP_EN); + } + + return MV_OK; +} + +/******************************************************************************* +* mvPexTargetWinRemapEnable - +* +* DESCRIPTION: +* +* INPUT: +* +* OUTPUT: +* +* RETURN: +* MV_BAD_PARAM for bad parameters ,MV_ERROR on error ! otherwise MV_OK +* +*******************************************************************************/ + +MV_STATUS mvPexTargetWinRemapEnable(MV_U32 pexIf, MV_U32 winNum, + MV_BOOL enable) +{ + PEX_WIN_REG_INFO winRegInfo; + + /* Parameter checking */ + if (pexIf >= mvCtrlPexMaxIfGet()) + { + mvOsPrintf("mvPexTargetWinRemap: ERR. Invalid PEX interface num %d\n", + pexIf); + return MV_BAD_PARAM; + } + if (MV_PEX_WIN_DEFAULT == winNum) + { + mvOsPrintf("mvPexTargetWinRemap: ERR. Invalid PEX win num %d\n", + winNum); + return MV_BAD_PARAM; + + } + + + pexWinRegInfoGet(pexIf, winNum, &winRegInfo); + + if (enable == MV_TRUE) + { + MV_REG_BIT_SET(winRegInfo.remapLowRegOffs,PXWRR_REMAP_EN); + } + else + { + MV_REG_BIT_RESET(winRegInfo.remapLowRegOffs,PXWRR_REMAP_EN); + } + + return MV_OK; + +} + +/******************************************************************************* +* mvPexBarSet - Set PEX bar address and size +* +* DESCRIPTION: +* +* INPUT: +* +* OUTPUT: +* None. +* +* RETURN: +* MV_BAD_PARAM for bad parameters ,MV_ERROR on error ! otherwise MV_OK +* +*******************************************************************************/ +MV_STATUS mvPexBarSet(MV_U32 pexIf, + MV_U32 barNum, + MV_PEX_BAR *pAddrWin) +{ + MV_U32 regBaseLow; + MV_U32 regSize,sizeToReg; + + + /* check parameters */ + if(pexIf >= mvCtrlPexMaxIfGet()) + { + mvOsPrintf("mvPexBarSet: ERR. Invalid PEX interface %d\n", pexIf); + return MV_BAD_PARAM; + } + + if(barNum >= PEX_MAX_BARS) + { + mvOsPrintf("mvPexBarSet: ERR. Invalid bar number %d\n", barNum); + return MV_BAD_PARAM; + } + + + if (pAddrWin->addrWin.size == 0) + { + mvOsPrintf("mvPexBarSet: Size zero is Illigal\n" ); + return MV_BAD_PARAM; + } + + + /* Check if the window complies with PEX spec */ + if (MV_TRUE != pexBarIsValid(pAddrWin->addrWin.baseLow, + pAddrWin->addrWin.size)) + { + mvOsPrintf("mvPexBarSet: ERR. Target %d window invalid\n", barNum); + return MV_BAD_PARAM; + } + + /* 2) Check if the requested bar overlaps with current bars */ + if (MV_TRUE == pexBarOverlapDetect(pexIf,barNum, &pAddrWin->addrWin)) + { + mvOsPrintf("mvPexBarSet: ERR. Target %d overlap\n", barNum); + return MV_BAD_PARAM; + } + + /* Get size register value according to window size */ + sizeToReg = ctrlSizeToReg(pAddrWin->addrWin.size, PXBCR_BAR_SIZE_ALIGNMENT); + + /* Read bar size */ + if (PEX_INTER_REGS_BAR != barNum) /* internal registers have no size */ + { + regSize = MV_REG_READ(PEX_BAR_CTRL_REG(pexIf,barNum)); + + /* Size parameter validity check. */ + if (-1 == sizeToReg) + { + mvOsPrintf("mvPexBarSet: ERR. Target BAR %d size invalid.\n",barNum); + return MV_BAD_PARAM; + } + + regSize &= ~PXBCR_BAR_SIZE_MASK; + regSize |= (sizeToReg << PXBCR_BAR_SIZE_OFFS) ; + + MV_REG_WRITE(PEX_BAR_CTRL_REG(pexIf,barNum),regSize); + + } + + /* set size */ + + + + /* Read base address low */ + regBaseLow = MV_REG_READ(PEX_CFG_DIRECT_ACCESS(pexIf, + PEX_MV_BAR_BASE(barNum))); + + /* clear current base */ + if (PEX_INTER_REGS_BAR == barNum) + { + regBaseLow &= ~PXBIR_BASE_MASK; + regBaseLow |= (pAddrWin->addrWin.baseLow & PXBIR_BASE_MASK); + } + else + { + regBaseLow &= ~PXBR_BASE_MASK; + regBaseLow |= (pAddrWin->addrWin.baseLow & PXBR_BASE_MASK); + } + + /* if we had a previous value that contain the bar type (MeM\IO), we want to + restore it */ + regBaseLow |= PEX_BAR_DEFAULT_ATTRIB; + + + + /* write base low */ + MV_REG_WRITE(PEX_CFG_DIRECT_ACCESS(pexIf,PEX_MV_BAR_BASE(barNum)), + regBaseLow); + + if (pAddrWin->addrWin.baseHigh != 0) + { + /* Read base address high */ + MV_REG_WRITE(PEX_CFG_DIRECT_ACCESS(pexIf,PEX_MV_BAR_BASE_HIGH(barNum)), + pAddrWin->addrWin.baseHigh); + + } + + /* lastly enable the Bar */ + if (pAddrWin->enable == MV_TRUE) + { + if (PEX_INTER_REGS_BAR != barNum) /* internal registers + are enabled always */ + { + MV_REG_BIT_SET(PEX_BAR_CTRL_REG(pexIf,barNum),PXBCR_BAR_EN); + } + } + else if (MV_FALSE == pAddrWin->enable) + { + if (PEX_INTER_REGS_BAR != barNum) /* internal registers + are enabled always */ + { + MV_REG_BIT_RESET(PEX_BAR_CTRL_REG(pexIf,barNum),PXBCR_BAR_EN); + } + + } + + + + return MV_OK; +} + + +/******************************************************************************* +* mvPexBarGet - Get PEX bar address and size +* +* DESCRIPTION: +* +* INPUT: +* +* OUTPUT: +* None. +* +* RETURN: +* MV_BAD_PARAM for bad parameters ,MV_ERROR on error ! otherwise MV_OK +* +*******************************************************************************/ + +MV_STATUS mvPexBarGet(MV_U32 pexIf, + MV_U32 barNum, + MV_PEX_BAR *pAddrWin) +{ + /* check parameters */ + if(pexIf >= mvCtrlPexMaxIfGet()) + { + mvOsPrintf("mvPexBarGet: ERR. Invalid PEX interface %d\n", pexIf); + return MV_BAD_PARAM; + } + + if(barNum >= PEX_MAX_BARS) + { + mvOsPrintf("mvPexBarGet: ERR. Invalid bar number %d\n", barNum); + return MV_BAD_PARAM; + } + + /* read base low */ + pAddrWin->addrWin.baseLow = + MV_REG_READ(PEX_CFG_DIRECT_ACCESS(pexIf,PEX_MV_BAR_BASE(barNum))); + + + if (PEX_INTER_REGS_BAR == barNum) + { + pAddrWin->addrWin.baseLow &= PXBIR_BASE_MASK; + } + else + { + pAddrWin->addrWin.baseLow &= PXBR_BASE_MASK; + } + + + /* read base high */ + pAddrWin->addrWin.baseHigh = + MV_REG_READ(PEX_CFG_DIRECT_ACCESS(pexIf,PEX_MV_BAR_BASE_HIGH(barNum))); + + + /* Read bar size */ + if (PEX_INTER_REGS_BAR != barNum) /* internal registers have no size */ + { + pAddrWin->addrWin.size = MV_REG_READ(PEX_BAR_CTRL_REG(pexIf,barNum)); + + /* check if enable or not */ + if (pAddrWin->addrWin.size & PXBCR_BAR_EN) + { + pAddrWin->enable = MV_TRUE; + } + else + { + pAddrWin->enable = MV_FALSE; + } + + /* now get the size */ + pAddrWin->addrWin.size &= PXBCR_BAR_SIZE_MASK; + pAddrWin->addrWin.size >>= PXBCR_BAR_SIZE_OFFS; + + pAddrWin->addrWin.size = ctrlRegToSize(pAddrWin->addrWin.size, + PXBCR_BAR_SIZE_ALIGNMENT); + + } + else /* PEX_INTER_REGS_BAR */ + { + pAddrWin->addrWin.size = INTER_REGS_SIZE; + pAddrWin->enable = MV_TRUE; + } + + + return MV_OK; +} + +/******************************************************************************* +* mvPexBarEnable - +* +* DESCRIPTION: +* +* INPUT: +* +* OUTPUT: +* None. +* +* RETURN: +* MV_BAD_PARAM for bad parameters ,MV_ERROR on error ! otherwise MV_OK +* +*******************************************************************************/ + + +MV_STATUS mvPexBarEnable(MV_U32 pexIf, MV_U32 barNum, MV_BOOL enable) +{ + + MV_PEX_BAR pexBar; + + /* check parameters */ + if(pexIf >= mvCtrlPexMaxIfGet()) + { + mvOsPrintf("mvPexBarEnable: ERR. Invalid PEX interface %d\n", pexIf); + return MV_BAD_PARAM; + } + + + if(barNum >= PEX_MAX_BARS) + { + mvOsPrintf("mvPexBarEnable: ERR. Invalid bar number %d\n", barNum); + return MV_BAD_PARAM; + } + + if (PEX_INTER_REGS_BAR == barNum) + { + if (MV_TRUE == enable) + { + return MV_OK; + } + else + { + return MV_ERROR; + } + } + + + if (MV_FALSE == enable) + { + /* disable bar and quit */ + MV_REG_BIT_RESET(PEX_BAR_CTRL_REG(pexIf,barNum),PXBCR_BAR_EN); + return MV_OK; + } + + /* else */ + + if (mvPexBarGet(pexIf,barNum,&pexBar) != MV_OK) + { + mvOsPrintf("mvPexBarEnable: mvPexBarGet Failed\n"); + return MV_ERROR; + + } + + if (MV_TRUE == pexBar.enable) + { + /* it is already enabled !!! */ + return MV_OK; + } + + /* else enable the bar*/ + + pexBar.enable = MV_TRUE; + + if (mvPexBarSet(pexIf,barNum,&pexBar) != MV_OK) + { + mvOsPrintf("mvPexBarEnable: mvPexBarSet Failed\n"); + return MV_ERROR; + + } + + return MV_OK; +} + + +/******************************************************************************* +* pexWinOverlapDetect - Detect address windows overlapping +* +* DESCRIPTION: +* This function detects address window overlapping of a given address +* window in PEX BARs. +* +* INPUT: +* pAddrWin - Address window to be checked. +* bar - BAR to be accessed by slave. +* +* OUTPUT: +* None. +* +* RETURN: +* MV_TRUE if the given address window overlap current address +* decode map, MV_FALSE otherwise. +* +*******************************************************************************/ +static MV_BOOL pexWinOverlapDetect(MV_U32 pexIf, + MV_U32 winNum, + MV_ADDR_WIN *pAddrWin) +{ + MV_U32 win; + MV_PEX_DEC_WIN addrDecWin; + + + for(win = 0; win < PEX_MAX_TARGET_WIN -2 ; win++) + { + /* don't check our target or illegal targets */ + if (winNum == win) + { + continue; + } + + /* Get window parameters */ + if (MV_OK != mvPexTargetWinGet(pexIf, win, &addrDecWin)) + { + mvOsPrintf("pexWinOverlapDetect: ERR. TargetWinGet failed win=%x\n", + win); + return MV_ERROR; + } + + /* Do not check disabled windows */ + if (MV_FALSE == addrDecWin.enable) + { + continue; + } + + + if(MV_TRUE == ctrlWinOverlapTest(pAddrWin, &addrDecWin.addrWin)) + { + mvOsPrintf("pexWinOverlapDetect: winNum %d overlap current %d\n", + winNum, win); + return MV_TRUE; + } + } + + return MV_FALSE; +} + +/******************************************************************************* +* pexIsWinWithinBar - Detect if address is within PEX bar boundries +* +* DESCRIPTION: +* +* INPUT: +* +* OUTPUT: +* None. +* +* RETURN: +* MV_TRUE if the given address window overlap current address +* decode map, MV_FALSE otherwise. +* +*******************************************************************************/ +static MV_BOOL pexIsWinWithinBar(MV_U32 pexIf, + MV_ADDR_WIN *pAddrWin) +{ + MV_U32 bar; + MV_PEX_BAR addrDecWin; + + for(bar = 0; bar < PEX_MAX_BARS; bar++) + { + + /* Get window parameters */ + if (MV_OK != mvPexBarGet(pexIf, bar, &addrDecWin)) + { + mvOsPrintf("pexIsWinWithinBar: ERR. mvPexBarGet failed\n"); + return MV_ERROR; + } + + /* Do not check disabled bars */ + if (MV_FALSE == addrDecWin.enable) + { + continue; + } + + + if(MV_TRUE == ctrlWinWithinWinTest(pAddrWin, &addrDecWin.addrWin)) + { + return MV_TRUE; + } + } + + return MV_FALSE; + +} + +/******************************************************************************* +* pexBarOverlapDetect - Detect address windows overlapping +* +* DESCRIPTION: +* This function detects address window overlapping of a given address +* window in PEX BARs. +* +* INPUT: +* pAddrWin - Address window to be checked. +* bar - BAR to be accessed by slave. +* +* OUTPUT: +* None. +* +* RETURN: +* MV_TRUE if the given address window overlap current address +* decode map, MV_FALSE otherwise. +* +*******************************************************************************/ +static MV_BOOL pexBarOverlapDetect(MV_U32 pexIf, + MV_U32 barNum, + MV_ADDR_WIN *pAddrWin) +{ + MV_U32 bar; + MV_PEX_BAR barDecWin; + + + for(bar = 0; bar < PEX_MAX_BARS; bar++) + { + /* don't check our target or illegal targets */ + if (barNum == bar) + { + continue; + } + + /* Get window parameters */ + if (MV_OK != mvPexBarGet(pexIf, bar, &barDecWin)) + { + mvOsPrintf("pexBarOverlapDetect: ERR. TargetWinGet failed\n"); + return MV_ERROR; + } + + /* don'nt check disabled bars */ + if (barDecWin.enable == MV_FALSE) + { + continue; + } + + + if(MV_TRUE == ctrlWinOverlapTest(pAddrWin, &barDecWin.addrWin)) + { + mvOsPrintf("pexBarOverlapDetect: winNum %d overlap current %d\n", + barNum, bar); + return MV_TRUE; + } + } + + return MV_FALSE; +} + +/******************************************************************************* +* pexBarIsValid - Check if the given address window is valid +* +* DESCRIPTION: +* PEX spec restrict BAR base to be aligned to BAR size. +* This function checks if the given address window is valid. +* +* INPUT: +* baseLow - 32bit low base address. +* size - Window size. +* +* OUTPUT: +* None. +* +* RETURN: +* MV_TRUE if the address window is valid, MV_FALSE otherwise. +* +*******************************************************************************/ +static MV_STATUS pexBarIsValid(MV_U32 baseLow, MV_U32 size) +{ + + /* PCI spec restrict BAR base to be aligned to BAR size */ + if(MV_IS_NOT_ALIGN(baseLow, size)) + { + return MV_ERROR; + } + else + { + return MV_TRUE; + } + + return MV_TRUE; +} + +/******************************************************************************* +* pexBarRegInfoGet - Get BAR register information +* +* DESCRIPTION: +* PEX BARs registers offsets are inconsecutive. +* This function gets a PEX BAR register information like register offsets +* and function location of the BAR. +* +* INPUT: +* pexIf - PEX interface number. +* bar - The PEX BAR in question. +* +* OUTPUT: +* pBarRegInfo - BAR register info struct. +* +* RETURN: +* MV_BAD_PARAM when bad parameters ,MV_ERROR on error ,othewise MV_OK +* +*******************************************************************************/ +static MV_STATUS pexWinRegInfoGet(MV_U32 pexIf, + MV_U32 winNum, + PEX_WIN_REG_INFO *pWinRegInfo) +{ + + if ((winNum >= 0)&&(winNum <=3)) + { + pWinRegInfo->baseLowRegOffs = PEX_WIN0_3_BASE_REG(pexIf,winNum); + pWinRegInfo->baseHighRegOffs = 0; + pWinRegInfo->sizeRegOffs = PEX_WIN0_3_CTRL_REG(pexIf,winNum); + pWinRegInfo->remapLowRegOffs = PEX_WIN0_3_REMAP_REG(pexIf,winNum); + pWinRegInfo->remapHighRegOffs = 0; + } + else if ((winNum >= 4)&&(winNum <=5)) + { + pWinRegInfo->baseLowRegOffs = PEX_WIN4_5_BASE_REG(pexIf,winNum); + pWinRegInfo->baseHighRegOffs = 0; + pWinRegInfo->sizeRegOffs = PEX_WIN4_5_CTRL_REG(pexIf,winNum); + pWinRegInfo->remapLowRegOffs = PEX_WIN4_5_REMAP_REG(pexIf,winNum); + pWinRegInfo->remapHighRegOffs = PEX_WIN4_5_REMAP_HIGH_REG(pexIf,winNum); + + } + else if (MV_PEX_WIN_DEFAULT == winNum) + { + pWinRegInfo->baseLowRegOffs = 0; + pWinRegInfo->baseHighRegOffs = 0; + pWinRegInfo->sizeRegOffs = PEX_WIN_DEFAULT_CTRL_REG(pexIf); + pWinRegInfo->remapLowRegOffs = 0; + pWinRegInfo->remapHighRegOffs = 0; + } + else if (MV_PEX_WIN_EXP_ROM == winNum) + { + pWinRegInfo->baseLowRegOffs = 0; + pWinRegInfo->baseHighRegOffs = 0; + pWinRegInfo->sizeRegOffs = PEX_WIN_EXP_ROM_CTRL_REG(pexIf); + pWinRegInfo->remapLowRegOffs = PEX_WIN_EXP_ROM_REMAP_REG(pexIf); + pWinRegInfo->remapHighRegOffs = 0; + + } + + return MV_OK; +} + +/******************************************************************************* +* pexBarNameGet - Get the string name of PEX BAR. +* +* DESCRIPTION: +* This function get the string name of PEX BAR. +* +* INPUT: +* bar - PEX bar number. +* +* OUTPUT: +* None. +* +* RETURN: +* pointer to the string name of PEX BAR. +* +*******************************************************************************/ +const MV_8* pexBarNameGet( MV_U32 bar ) +{ + switch( bar ) + { + case PEX_INTER_REGS_BAR: + return "Internal Regs Bar0...."; + case PEX_DRAM_BAR: + return "DRAM Bar1............."; + case PEX_DEVICE_BAR: + return "Devices Bar2.........."; + default: + return "Bar unknown"; + } +} +/******************************************************************************* +* mvPexAddrDecShow - Print the PEX address decode map (BARs and windows). +* +* DESCRIPTION: +* This function print the PEX address decode map (BARs and windows). +* +* INPUT: +* None. +* +* OUTPUT: +* None. +* +* RETURN: +* None. +* +*******************************************************************************/ +MV_VOID mvPexAddrDecShow(MV_VOID) +{ + MV_PEX_BAR pexBar; + MV_PEX_DEC_WIN win; + MV_U32 pexIf; + MV_U32 bar,winNum; + + for( pexIf = 0; pexIf < mvCtrlPexMaxIfGet(); pexIf++ ) + { + if (MV_FALSE == mvCtrlPwrClckGet(PEX_UNIT_ID, pexIf)) continue; + mvOsOutput( "\n" ); + mvOsOutput( "PEX%d:\n", pexIf ); + mvOsOutput( "-----\n" ); + + mvOsOutput( "\nPex Bars \n\n"); + + for( bar = 0; bar < PEX_MAX_BARS; bar++ ) + { + memset( &pexBar, 0, sizeof(MV_PEX_BAR) ); + + mvOsOutput( "%s ", pexBarNameGet(bar) ); + + if( mvPexBarGet( pexIf, bar, &pexBar ) == MV_OK ) + { + if( pexBar.enable ) + { + mvOsOutput( "base %08x, ", pexBar.addrWin.baseLow ); + mvSizePrint( pexBar.addrWin.size ); + mvOsOutput( "\n" ); + } + else + mvOsOutput( "disable\n" ); + } + } + mvOsOutput( "\nPex Decode Windows\n\n"); + + for( winNum = 0; winNum < PEX_MAX_TARGET_WIN - 2; winNum++) + { + memset( &win, 0,sizeof(MV_PEX_DEC_WIN) ); + + mvOsOutput( "win%d - ", winNum ); + + if ( mvPexTargetWinGet(pexIf,winNum,&win) == MV_OK) + { + if (win.enable) + { + mvOsOutput( "%s base %08x, ", + mvCtrlTargetNameGet(win.target), win.addrWin.baseLow ); + mvOsOutput( "...." ); + mvSizePrint( win.addrWin.size ); + + mvOsOutput( "\n" ); + } + else + mvOsOutput( "disable\n" ); + + + } + } + + memset( &win, 0,sizeof(MV_PEX_DEC_WIN) ); + + mvOsOutput( "default win - " ); + + if ( mvPexTargetWinGet(pexIf, MV_PEX_WIN_DEFAULT, &win) == MV_OK) + { + mvOsOutput( "%s ", + mvCtrlTargetNameGet(win.target) ); + mvOsOutput( "\n" ); + } + memset( &win, 0,sizeof(MV_PEX_DEC_WIN) ); + + mvOsOutput( "Expansion ROM - " ); + + if ( mvPexTargetWinGet(pexIf, MV_PEX_WIN_EXP_ROM, &win) == MV_OK) + { + mvOsOutput( "%s ", + mvCtrlTargetNameGet(win.target) ); + mvOsOutput( "\n" ); + } + + } +} + + diff --git a/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/kw_family/ctrlEnv/sys/mvSysPex.h b/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/kw_family/ctrlEnv/sys/mvSysPex.h new file mode 100644 index 0000000000..3505613b7f --- /dev/null +++ b/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/kw_family/ctrlEnv/sys/mvSysPex.h @@ -0,0 +1,348 @@ +/******************************************************************************* +Copyright (C) Marvell International Ltd. and its affiliates + +This software file (the "File") is owned and distributed by Marvell +International Ltd. and/or its affiliates ("Marvell") under the following +alternative licensing terms. Once you have made an election to distribute the +File under one of the following license alternatives, please (i) delete this +introductory statement regarding license alternatives, (ii) delete the two +license alternatives that you have not elected to use and (iii) preserve the +Marvell copyright notice above. + +******************************************************************************** +Marvell Commercial License Option + +If you received this File from Marvell and you have entered into a commercial +license agreement (a "Commercial License") with Marvell, the File is licensed +to you under the terms of the applicable Commercial License. + +******************************************************************************** +Marvell GPL License Option + +If you received this File from Marvell, you may opt to use, redistribute and/or +modify this File in accordance with the terms and conditions of the General +Public License Version 2, June 1991 (the "GPL License"), a copy of which is +available along with the File in the license.txt file or by writing to the Free +Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or +on the worldwide web at http://www.gnu.org/licenses/gpl.txt. + +THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED +WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY +DISCLAIMED. The GPL License provides additional details about this warranty +disclaimer. +******************************************************************************** +Marvell BSD License Option + +If you received this File from Marvell, you may opt to use, redistribute and/or +modify this File under the following licensing terms. +Redistribution and use in source and binary forms, with or without modification, +are permitted provided that the following conditions are met: + + * Redistributions of source code must retain the above copyright notice, + this list of conditions and the following disclaimer. + + * Redistributions in binary form must reproduce the above copyright + notice, this list of conditions and the following disclaimer in the + documentation and/or other materials provided with the distribution. + + * Neither the name of Marvell nor the names of its contributors may be + used to endorse or promote products derived from this software without + specific prior written permission. + +THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND +ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED +WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE +DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR +ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES +(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; +LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON +ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS +SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + +*******************************************************************************/ + +#ifndef __INCSysPEXH +#define __INCSysPEXH + +#include "mvCommon.h" +#include "ctrlEnv/sys/mvCpuIf.h" +#include "ctrlEnv/mvCtrlEnvLib.h" +#include "ctrlEnv/mvCtrlEnvAddrDec.h" + +/* 4KB granularity */ +#define MINIMUM_WINDOW_SIZE 0x1000 +#define MINIMUM_BAR_SIZE 0x1000 +#define MINIMUM_BAR_SIZE_MASK 0xFFFFF000 +#define BAR_SIZE_OFFS 12 +#define BAR_SIZE_MASK (0xFFFFF << BAR_SIZE_OFFS) + + + +#define MV_PEX_WIN_DEFAULT 6 +#define MV_PEX_WIN_EXP_ROM 7 +#define PEX_MAX_TARGET_WIN 8 + + +#define PEX_MAX_BARS 3 +#define PEX_INTER_REGS_BAR 0 +#define PEX_DRAM_BAR 1 +#define PEX_DEVICE_BAR 2 + +/*************************************/ +/* PCI Express BAR Control Registers */ +/*************************************/ +#define PEX_BAR_CTRL_REG(pexIf,bar) (0x41804 + (bar-1)*4- (pexIf)*0x10000) +#define PEX_EXP_ROM_BAR_CTRL_REG(pexIf) (0x4180C - (pexIf)*0x10000) + + +/* PCI Express BAR Control Register */ +/* PEX_BAR_CTRL_REG (PXBCR) */ + +#define PXBCR_BAR_EN BIT0 +#define PXBCR_BAR_SIZE_OFFS 16 +#define PXBCR_BAR_SIZE_MASK (0xffff << PXBCR_BAR_SIZE_OFFS) +#define PXBCR_BAR_SIZE_ALIGNMENT 0x10000 + + + +/* PCI Express Expansion ROM BAR Control Register */ +/* PEX_EXP_ROM_BAR_CTRL_REG (PXERBCR) */ + +#define PXERBCR_EXPROM_EN BIT0 +#define PXERBCR_EXPROMSZ_OFFS 19 +#define PXERBCR_EXPROMSZ_MASK (0xf << PXERBCR_EXPROMSZ_OFFS) +#define PXERBCR_EXPROMSZ_512KB (0x0 << PXERBCR_EXPROMSZ_OFFS) +#define PXERBCR_EXPROMSZ_1024KB (0x1 << PXERBCR_EXPROMSZ_OFFS) +#define PXERBCR_EXPROMSZ_2048KB (0x3 << PXERBCR_EXPROMSZ_OFFS) +#define PXERBCR_EXPROMSZ_4096KB (0x7 << PXERBCR_EXPROMSZ_OFFS) + +/************************************************/ +/* PCI Express Address Window Control Registers */ +/************************************************/ +#define PEX_WIN0_3_CTRL_REG(pexIf,winNum) \ + (0x41820 + (winNum) * 0x10 - (pexIf) * 0x10000) +#define PEX_WIN0_3_BASE_REG(pexIf,winNum) \ + (0x41824 + (winNum) * 0x10 - (pexIf) * 0x10000) +#define PEX_WIN0_3_REMAP_REG(pexIf,winNum) \ + (0x4182C + (winNum) * 0x10 - (pexIf) * 0x10000) +#define PEX_WIN4_5_CTRL_REG(pexIf,winNum) \ + (0x41860 + (winNum - 4) * 0x20 - (pexIf) * 0x10000) +#define PEX_WIN4_5_BASE_REG(pexIf,winNum) \ + (0x41864 + (winNum - 4) * 0x20 - (pexIf) * 0x10000) +#define PEX_WIN4_5_REMAP_REG(pexIf,winNum) \ + (0x4186C + (winNum - 4) * 0x20 - (pexIf) * 0x10000) +#define PEX_WIN4_5_REMAP_HIGH_REG(pexIf,winNum) \ + (0x41870 + (winNum - 4) * 0x20 - (pexIf) * 0x10000) + +#define PEX_WIN_DEFAULT_CTRL_REG(pexIf) (0x418B0 - (pexIf) * 0x10000) +#define PEX_WIN_EXP_ROM_CTRL_REG(pexIf) (0x418C0 - (pexIf) * 0x10000) +#define PEX_WIN_EXP_ROM_REMAP_REG(pexIf) (0x418C4 - (pexIf) * 0x10000) + +/* PCI Express Window Control Register */ +/* PEX_WIN_CTRL_REG (PXWCR) */ + +#define PXWCR_WIN_EN BIT0 /* Window Enable.*/ + +#define PXWCR_WIN_BAR_MAP_OFFS 1 /* Mapping to BAR.*/ +#define PXWCR_WIN_BAR_MAP_MASK BIT1 +#define PXWCR_WIN_BAR_MAP_BAR1 (0 << PXWCR_WIN_BAR_MAP_OFFS) +#define PXWCR_WIN_BAR_MAP_BAR2 (1 << PXWCR_WIN_BAR_MAP_OFFS) + +#define PXWCR_TARGET_OFFS 4 /*Unit ID */ +#define PXWCR_TARGET_MASK (0xf << PXWCR_TARGET_OFFS) + +#define PXWCR_ATTRIB_OFFS 8 /* target attributes */ +#define PXWCR_ATTRIB_MASK (0xff << PXWCR_ATTRIB_OFFS) + +#define PXWCR_SIZE_OFFS 16 /* size */ +#define PXWCR_SIZE_MASK (0xffff << PXWCR_SIZE_OFFS) +#define PXWCR_SIZE_ALIGNMENT 0x10000 + +/* PCI Express Window Base Register */ +/* PEX_WIN_BASE_REG (PXWBR)*/ + +#define PXWBR_BASE_OFFS 16 /* address[31:16] */ +#define PXWBR_BASE_MASK (0xffff << PXWBR_BASE_OFFS) +#define PXWBR_BASE_ALIGNMENT 0x10000 + +/* PCI Express Window Remap Register */ +/* PEX_WIN_REMAP_REG (PXWRR)*/ + +#define PXWRR_REMAP_EN BIT0 +#define PXWRR_REMAP_OFFS 16 +#define PXWRR_REMAP_MASK (0xffff << PXWRR_REMAP_OFFS) +#define PXWRR_REMAP_ALIGNMENT 0x10000 + +/* PCI Express Window Remap (High) Register */ +/* PEX_WIN_REMAP_HIGH_REG (PXWRHR)*/ + +#define PXWRHR_REMAP_HIGH_OFFS 0 +#define PXWRHR_REMAP_HIGH_MASK (0xffffffff << PXWRHR_REMAP_HIGH_OFFS) + +/* PCI Express Default Window Control Register */ +/* PEX_WIN_DEFAULT_CTRL_REG (PXWDCR) */ + +#define PXWDCR_TARGET_OFFS 4 /*Unit ID */ +#define PXWDCR_TARGET_MASK (0xf << PXWDCR_TARGET_OFFS) +#define PXWDCR_ATTRIB_OFFS 8 /* target attributes */ +#define PXWDCR_ATTRIB_MASK (0xff << PXWDCR_ATTRIB_OFFS) + +/* PCI Express Expansion ROM Window Control Register */ +/* PEX_WIN_EXP_ROM_CTRL_REG (PXWERCR)*/ + +#define PXWERCR_TARGET_OFFS 4 /*Unit ID */ +#define PXWERCR_TARGET_MASK (0xf << PXWERCR_TARGET_OFFS) +#define PXWERCR_ATTRIB_OFFS 8 /* target attributes */ +#define PXWERCR_ATTRIB_MASK (0xff << PXWERCR_ATTRIB_OFFS) + +/* PCI Express Expansion ROM Window Remap Register */ +/* PEX_WIN_EXP_ROM_REMAP_REG (PXWERRR)*/ + +#define PXWERRR_REMAP_EN BIT0 +#define PXWERRR_REMAP_OFFS 16 +#define PXWERRR_REMAP_MASK (0xffff << PXWERRR_REMAP_OFFS) +#define PXWERRR_REMAP_ALIGNMENT 0x10000 + + + +/*PEX_MEMORY_BAR_BASE_ADDR(barNum) (PXMBBA)*/ +/* PCI Express BAR0 Internal Register*/ +/*PEX BAR0_INTER_REG (PXBIR)*/ + +#define PXBIR_IOSPACE BIT0 /* Memory Space Indicator */ + +#define PXBIR_TYPE_OFFS 1 /* BAR Type/Init Val. */ +#define PXBIR_TYPE_MASK (0x3 << PXBIR_TYPE_OFFS) +#define PXBIR_TYPE_32BIT_ADDR (0x0 << PXBIR_TYPE_OFFS) +#define PXBIR_TYPE_64BIT_ADDR (0x2 << PXBIR_TYPE_OFFS) + +#define PXBIR_PREFETCH_EN BIT3 /* Prefetch Enable */ + +#define PXBIR_BASE_OFFS 20 /* Base address. Address bits [31:20] */ +#define PXBIR_BASE_MASK (0xfff << PXBIR_BASE_OFFS) +#define PXBIR_BASE_ALIGNMET (1 << PXBIR_BASE_OFFS) + + +/* PCI Express BAR0 Internal (High) Register*/ +/*PEX BAR0_INTER_REG_HIGH (PXBIRH)*/ + +#define PXBIRH_BASE_OFFS 0 /* Base address. Bits [63:32] */ +#define PXBIRH_BASE_MASK (0xffffffff << PBBHR_BASE_OFFS) + + +#define PEX_BAR_DEFAULT_ATTRIB 0xc /* Memory - Prefetch - 64 bit address */ +#define PEX_BAR0_DEFAULT_ATTRIB PEX_BAR_DEFAULT_ATTRIB +#define PEX_BAR1_DEFAULT_ATTRIB PEX_BAR_DEFAULT_ATTRIB +#define PEX_BAR2_DEFAULT_ATTRIB PEX_BAR_DEFAULT_ATTRIB + + +/* PCI Express BAR1 Register */ +/* PCI Express BAR2 Register*/ +/*PEX BAR1_REG (PXBR)*/ +/*PEX BAR2_REG (PXBR)*/ + +#define PXBR_IOSPACE BIT0 /* Memory Space Indicator */ + +#define PXBR_TYPE_OFFS 1 /* BAR Type/Init Val. */ +#define PXBR_TYPE_MASK (0x3 << PXBR_TYPE_OFFS) +#define PXBR_TYPE_32BIT_ADDR (0x0 << PXBR_TYPE_OFFS) +#define PXBR_TYPE_64BIT_ADDR (0x2 << PXBR_TYPE_OFFS) + +#define PXBR_PREFETCH_EN BIT3 /* Prefetch Enable */ + +#define PXBR_BASE_OFFS 16 /* Base address. Address bits [31:16] */ +#define PXBR_BASE_MASK (0xffff << PXBR_BASE_OFFS) +#define PXBR_BASE_ALIGNMET (1 << PXBR_BASE_OFFS) + + +/* PCI Express BAR1 (High) Register*/ +/* PCI Express BAR2 (High) Register*/ +/*PEX BAR1_REG_HIGH (PXBRH)*/ +/*PEX BAR2_REG_HIGH (PXBRH)*/ + +#define PXBRH_BASE_OFFS 0 /* Base address. Address bits [63:32] */ +#define PXBRH_BASE_MASK (0xffffffff << PXBRH_BASE_OFFS) + +/* PCI Express Expansion ROM BAR Register*/ +/*PEX_EXPANSION_ROM_BASE_ADDR_REG (PXERBAR)*/ + +#define PXERBAR_EXPROMEN BIT0 /* Expansion ROM Enable */ + +#define PXERBAR_BASE_512K_OFFS 19 /* Expansion ROM Base Address */ +#define PXERBAR_BASE_512K_MASK (0x1fff << PXERBAR_BASE_512K_OFFS) + +#define PXERBAR_BASE_1MB_OFFS 20 /* Expansion ROM Base Address */ +#define PXERBAR_BASE_1MB_MASK (0xfff << PXERBAR_BASE_1MB_OFFS) + +#define PXERBAR_BASE_2MB_OFFS 21 /* Expansion ROM Base Address */ +#define PXERBAR_BASE_2MB_MASK (0x7ff << PXERBAR_BASE_2MB_OFFS) + +#define PXERBAR_BASE_4MB_OFFS 22 /* Expansion ROM Base Address */ +#define PXERBAR_BASE_4MB_MASK (0x3ff << PXERBAR_BASE_4MB_OFFS) + +/* PEX Bar attributes */ +typedef struct _mvPexBar +{ + MV_ADDR_WIN addrWin; /* An address window*/ + MV_BOOL enable; /* Address decode window is enabled/disabled */ + +}MV_PEX_BAR; + +/* PEX Remap Window attributes */ +typedef struct _mvPexRemapWin +{ + MV_ADDR_WIN addrWin; /* An address window*/ + MV_BOOL enable; /* Address decode window is enabled/disabled */ + +}MV_PEX_REMAP_WIN; + +/* PEX Remap Window attributes */ +typedef struct _mvPexDecWin +{ + MV_TARGET target; + MV_ADDR_WIN addrWin; /* An address window*/ + MV_U32 targetBar; + MV_U8 attrib; /* chip select attributes */ + MV_TARGET_ID targetId; /* Target Id of this MV_TARGET */ + MV_BOOL enable; /* Address decode window is enabled/disabled */ + +}MV_PEX_DEC_WIN; + +/* Global Functions prototypes */ +/* mvPexHalInit - Initialize PEX interfaces*/ +MV_STATUS mvPexInit(MV_U32 pexIf, MV_PEX_TYPE pexType); + + +/* mvPexTargetWinSet - Set PEX to peripheral target address window BAR*/ +MV_STATUS mvPexTargetWinSet(MV_U32 pexIf, MV_U32 winNum, + MV_PEX_DEC_WIN *pAddrDecWin); + +/* mvPexTargetWinGet - Get PEX to peripheral target address window*/ +MV_STATUS mvPexTargetWinGet(MV_U32 pexIf, MV_U32 winNum, + MV_PEX_DEC_WIN *pAddrDecWin); + +/* mvPexTargetWinEnable - Enable/disable a PEX BAR window*/ +MV_STATUS mvPexTargetWinEnable(MV_U32 pexIf,MV_U32 winNum, MV_BOOL enable); + +/* mvPexTargetWinRemap - Set PEX to target address window remap.*/ +MV_STATUS mvPexTargetWinRemap(MV_U32 pexIf, MV_U32 winNum, + MV_PEX_REMAP_WIN *pAddrWin); + +/* mvPexTargetWinRemapEnable -enable\disable a PEX Window remap.*/ +MV_STATUS mvPexTargetWinRemapEnable(MV_U32 pexIf, MV_U32 winNum, + MV_BOOL enable); + +/* mvPexBarSet - Set PEX bar address and size */ +MV_STATUS mvPexBarSet(MV_U32 pexIf, MV_U32 barNum, MV_PEX_BAR *addrWin); + +/* mvPexBarGet - Get PEX bar address and size */ +MV_STATUS mvPexBarGet(MV_U32 pexIf, MV_U32 barNum, MV_PEX_BAR *addrWin); + +/* mvPexBarEnable - enable\disable a PEX bar*/ +MV_STATUS mvPexBarEnable(MV_U32 pexIf, MV_U32 barNum, MV_BOOL enable); + +/* mvPexAddrDecShow - Display address decode windows attributes */ +MV_VOID mvPexAddrDecShow(MV_VOID); + +#endif diff --git a/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/kw_family/ctrlEnv/sys/mvSysSata.c b/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/kw_family/ctrlEnv/sys/mvSysSata.c new file mode 100644 index 0000000000..f100a12d10 --- /dev/null +++ b/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/kw_family/ctrlEnv/sys/mvSysSata.c @@ -0,0 +1,430 @@ +/******************************************************************************* +Copyright (C) Marvell International Ltd. and its affiliates + +This software file (the "File") is owned and distributed by Marvell +International Ltd. and/or its affiliates ("Marvell") under the following +alternative licensing terms. Once you have made an election to distribute the +File under one of the following license alternatives, please (i) delete this +introductory statement regarding license alternatives, (ii) delete the two +license alternatives that you have not elected to use and (iii) preserve the +Marvell copyright notice above. + +******************************************************************************** +Marvell Commercial License Option + +If you received this File from Marvell and you have entered into a commercial +license agreement (a "Commercial License") with Marvell, the File is licensed +to you under the terms of the applicable Commercial License. + +******************************************************************************** +Marvell GPL License Option + +If you received this File from Marvell, you may opt to use, redistribute and/or +modify this File in accordance with the terms and conditions of the General +Public License Version 2, June 1991 (the "GPL License"), a copy of which is +available along with the File in the license.txt file or by writing to the Free +Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or +on the worldwide web at http://www.gnu.org/licenses/gpl.txt. + +THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED +WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY +DISCLAIMED. The GPL License provides additional details about this warranty +disclaimer. +******************************************************************************** +Marvell BSD License Option + +If you received this File from Marvell, you may opt to use, redistribute and/or +modify this File under the following licensing terms. +Redistribution and use in source and binary forms, with or without modification, +are permitted provided that the following conditions are met: + + * Redistributions of source code must retain the above copyright notice, + this list of conditions and the following disclaimer. + + * Redistributions in binary form must reproduce the above copyright + notice, this list of conditions and the following disclaimer in the + documentation and/or other materials provided with the distribution. + + * Neither the name of Marvell nor the names of its contributors may be + used to endorse or promote products derived from this software without + specific prior written permission. + +THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND +ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED +WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE +DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR +ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES +(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; +LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON +ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS +SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + +*******************************************************************************/ + + +#include "mvTypes.h" +#include "mvCommon.h" +#include "mvOs.h" +#include "ctrlEnv/mvCtrlEnvLib.h" +#include "cpu/mvCpu.h" +#include "ctrlEnv/sys/mvCpuIf.h" +#include "sata/CoreDriver/mvRegs.h" +#include "ctrlEnv/sys/mvSysSata.h" + +MV_TARGET sataAddrDecPrioTab[] = +{ +#if defined(MV_INCLUDE_SDRAM_CS0) + SDRAM_CS0, +#endif +#if defined(MV_INCLUDE_SDRAM_CS1) + SDRAM_CS1, +#endif +#if defined(MV_INCLUDE_SDRAM_CS2) + SDRAM_CS2, +#endif +#if defined(MV_INCLUDE_SDRAM_CS3) + SDRAM_CS3, +#endif +#if defined(MV_INCLUDE_PEX) + PEX0_MEM, +#endif + TBL_TERM +}; + + +/******************************************************************************* +* sataWinOverlapDetect - Detect SATA address windows overlapping +* +* DESCRIPTION: +* An unpredicted behaviur is expected in case SATA address decode +* windows overlapps. +* This function detects SATA address decode windows overlapping of a +* specified window. The function does not check the window itself for +* overlapping. The function also skipps disabled address decode windows. +* +* INPUT: +* winNum - address decode window number. +* pAddrDecWin - An address decode window struct. +* +* OUTPUT: +* None. +* +* RETURN: +* MV_TRUE if the given address window overlap current address +* decode map, MV_FALSE otherwise, MV_ERROR if reading invalid data +* from registers. +* +*******************************************************************************/ +static MV_STATUS sataWinOverlapDetect(int dev, MV_U32 winNum, + MV_ADDR_WIN *pAddrWin) +{ + MV_U32 winNumIndex; + MV_SATA_DEC_WIN addrDecWin; + + for(winNumIndex=0; winNumIndex= MV_SATA_MAX_ADDR_DECODE_WIN) + { + mvOsPrintf("%s: ERR. Invalid win num %d\n",__FUNCTION__, winNum); + return MV_BAD_PARAM; + } + + /* Check if the requested window overlapps with current windows */ + if (MV_TRUE == sataWinOverlapDetect(dev, winNum, &pAddrDecWin->addrWin)) + { + mvOsPrintf("%s: ERR. Window %d overlap\n", __FUNCTION__, winNum); + return MV_ERROR; + } + + /* check if address is aligned to the size */ + if(MV_IS_NOT_ALIGN(pAddrDecWin->addrWin.baseLow, pAddrDecWin->addrWin.size)) + { + mvOsPrintf("mvSataWinSet:Error setting SATA window %d to "\ + "target %s.\nAddress 0x%08x is unaligned to size 0x%x.\n", + winNum, + mvCtrlTargetNameGet(pAddrDecWin->target), + pAddrDecWin->addrWin.baseLow, + pAddrDecWin->addrWin.size); + return MV_ERROR; + } + + decRegs.baseReg = 0; + decRegs.sizeReg = 0; + + if (MV_OK != mvCtrlAddrDecToReg(&(pAddrDecWin->addrWin),&decRegs)) + { + mvOsPrintf("%s: mvCtrlAddrDecToReg Failed\n", __FUNCTION__); + return MV_ERROR; + } + + mvCtrlAttribGet(pAddrDecWin->target, &targetAttribs); + + /* set attributes */ + decRegs.sizeReg &= ~MV_SATA_WIN_ATTR_MASK; + decRegs.sizeReg |= (targetAttribs.attrib << MV_SATA_WIN_ATTR_OFFSET); + + /* set target ID */ + decRegs.sizeReg &= ~MV_SATA_WIN_TARGET_MASK; + decRegs.sizeReg |= (targetAttribs.targetId << MV_SATA_WIN_TARGET_OFFSET); + + if (pAddrDecWin->enable == MV_TRUE) + { + decRegs.sizeReg |= MV_SATA_WIN_ENABLE_MASK; + } + else + { + decRegs.sizeReg &= ~MV_SATA_WIN_ENABLE_MASK; + } + + MV_REG_WRITE( MV_SATA_WIN_CTRL_REG(dev, winNum), decRegs.sizeReg); + MV_REG_WRITE( MV_SATA_WIN_BASE_REG(dev, winNum), decRegs.baseReg); + + return MV_OK; +} + +/******************************************************************************* +* mvSataWinGet - Get SATA peripheral target address window. +* +* DESCRIPTION: +* Get SATA peripheral target address window. +* +* INPUT: +* winNum - SATA target address decode window number. +* +* OUTPUT: +* pAddrDecWin - SATA target window data structure. +* +* RETURN: +* MV_ERROR if register parameters are invalid. +* +*******************************************************************************/ +MV_STATUS mvSataWinGet(int dev, MV_U32 winNum, MV_SATA_DEC_WIN *pAddrDecWin) +{ + MV_DEC_REGS decRegs; + MV_TARGET_ATTRIB targetAttrib; + + /* Parameter checking */ + if (winNum >= MV_SATA_MAX_ADDR_DECODE_WIN) + { + mvOsPrintf("%s (dev=%d): ERR. Invalid winNum %d\n", + __FUNCTION__, dev, winNum); + return MV_NOT_SUPPORTED; + } + + decRegs.baseReg = MV_REG_READ( MV_SATA_WIN_BASE_REG(dev, winNum) ); + decRegs.sizeReg = MV_REG_READ( MV_SATA_WIN_CTRL_REG(dev, winNum) ); + + if (MV_OK != mvCtrlRegToAddrDec(&decRegs, &pAddrDecWin->addrWin) ) + { + mvOsPrintf("%s: mvCtrlRegToAddrDec Failed\n", __FUNCTION__); + return MV_ERROR; + } + + /* attrib and targetId */ + targetAttrib.attrib = (decRegs.sizeReg & MV_SATA_WIN_ATTR_MASK) >> + MV_SATA_WIN_ATTR_OFFSET; + targetAttrib.targetId = (decRegs.sizeReg & MV_SATA_WIN_TARGET_MASK) >> + MV_SATA_WIN_TARGET_OFFSET; + + pAddrDecWin->target = mvCtrlTargetGet(&targetAttrib); + + /* Check if window is enabled */ + if(decRegs.sizeReg & MV_SATA_WIN_ENABLE_MASK) + { + pAddrDecWin->enable = MV_TRUE; + } + else + { + pAddrDecWin->enable = MV_FALSE; + } + return MV_OK; +} +/******************************************************************************* +* mvSataAddrDecShow - Print the SATA address decode map. +* +* DESCRIPTION: +* This function print the SATA address decode map. +* +* INPUT: +* None. +* +* OUTPUT: +* None. +* +* RETURN: +* None. +* +*******************************************************************************/ +MV_VOID mvSataAddrDecShow(MV_VOID) +{ + + MV_SATA_DEC_WIN win; + int i,j; + + + + for( j = 0; j < MV_SATA_MAX_CHAN; j++ ) + { + if (MV_FALSE == mvCtrlPwrClckGet(SATA_UNIT_ID, j)) + return; + + mvOsOutput( "\n" ); + mvOsOutput( "SATA %d:\n", j ); + mvOsOutput( "----\n" ); + + for( i = 0; i < MV_SATA_MAX_ADDR_DECODE_WIN; i++ ) + { + memset( &win, 0, sizeof(MV_SATA_DEC_WIN) ); + + mvOsOutput( "win%d - ", i ); + + if( mvSataWinGet(j, i, &win ) == MV_OK ) + { + if( win.enable ) + { + mvOsOutput( "%s base %08x, ", + mvCtrlTargetNameGet(win.target), win.addrWin.baseLow ); + mvOsOutput( "...." ); + + mvSizePrint( win.addrWin.size ); + + mvOsOutput( "\n" ); + } + else + mvOsOutput( "disable\n" ); + } + } + } +} + + +/******************************************************************************* +* mvSataWinInit - Initialize the integrated SATA target address window. +* +* DESCRIPTION: +* Initialize the SATA peripheral target address window. +* +* INPUT: +* +* +* OUTPUT: +* +* +* RETURN: +* MV_ERROR if register parameters are invalid. +* +*******************************************************************************/ +MV_STATUS mvSataWinInit(MV_VOID) +{ + int winNum; + MV_SATA_DEC_WIN sataWin; + MV_CPU_DEC_WIN cpuAddrDecWin; + MV_U32 status, winPrioIndex = 0; + + /* Initiate Sata address decode */ + + /* First disable all address decode windows */ + for(winNum = 0; winNum < MV_SATA_MAX_ADDR_DECODE_WIN; winNum++) + { + MV_U32 regVal = MV_REG_READ(MV_SATA_WIN_CTRL_REG(0, winNum)); + regVal &= ~MV_SATA_WIN_ENABLE_MASK; + MV_REG_WRITE(MV_SATA_WIN_CTRL_REG(0, winNum), regVal); + } + + winNum = 0; + while( (sataAddrDecPrioTab[winPrioIndex] != TBL_TERM) && + (winNum < MV_SATA_MAX_ADDR_DECODE_WIN) ) + { + /* first get attributes from CPU If */ + status = mvCpuIfTargetWinGet(sataAddrDecPrioTab[winPrioIndex], + &cpuAddrDecWin); + + if(MV_NO_SUCH == status) + { + winPrioIndex++; + continue; + } + if (MV_OK != status) + { + mvOsPrintf("%s: ERR. mvCpuIfTargetWinGet failed\n", __FUNCTION__); + return MV_ERROR; + } + + if (cpuAddrDecWin.enable == MV_TRUE) + { + sataWin.addrWin.baseHigh = cpuAddrDecWin.addrWin.baseHigh; + sataWin.addrWin.baseLow = cpuAddrDecWin.addrWin.baseLow; + sataWin.addrWin.size = cpuAddrDecWin.addrWin.size; + sataWin.enable = MV_TRUE; + sataWin.target = sataAddrDecPrioTab[winPrioIndex]; + + if(MV_OK != mvSataWinSet(0/*dev*/, winNum, &sataWin)) + { + return MV_ERROR; + } + winNum++; + } + winPrioIndex++; + } + return MV_OK; +} + + + diff --git a/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/kw_family/ctrlEnv/sys/mvSysSata.h b/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/kw_family/ctrlEnv/sys/mvSysSata.h new file mode 100644 index 0000000000..611f5776b7 --- /dev/null +++ b/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/kw_family/ctrlEnv/sys/mvSysSata.h @@ -0,0 +1,128 @@ + +/******************************************************************************* +Copyright (C) Marvell International Ltd. and its affiliates + +This software file (the "File") is owned and distributed by Marvell +International Ltd. and/or its affiliates ("Marvell") under the following +alternative licensing terms. Once you have made an election to distribute the +File under one of the following license alternatives, please (i) delete this +introductory statement regarding license alternatives, (ii) delete the two +license alternatives that you have not elected to use and (iii) preserve the +Marvell copyright notice above. + +******************************************************************************** +Marvell Commercial License Option + +If you received this File from Marvell and you have entered into a commercial +license agreement (a "Commercial License") with Marvell, the File is licensed +to you under the terms of the applicable Commercial License. + +******************************************************************************** +Marvell GPL License Option + +If you received this File from Marvell, you may opt to use, redistribute and/or +modify this File in accordance with the terms and conditions of the General +Public License Version 2, June 1991 (the "GPL License"), a copy of which is +available along with the File in the license.txt file or by writing to the Free +Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or +on the worldwide web at http://www.gnu.org/licenses/gpl.txt. + +THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED +WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY +DISCLAIMED. The GPL License provides additional details about this warranty +disclaimer. +******************************************************************************** +Marvell BSD License Option + +If you received this File from Marvell, you may opt to use, redistribute and/or +modify this File under the following licensing terms. +Redistribution and use in source and binary forms, with or without modification, +are permitted provided that the following conditions are met: + + * Redistributions of source code must retain the above copyright notice, + this list of conditions and the following disclaimer. + + * Redistributions in binary form must reproduce the above copyright + notice, this list of conditions and the following disclaimer in the + documentation and/or other materials provided with the distribution. + + * Neither the name of Marvell nor the names of its contributors may be + used to endorse or promote products derived from this software without + specific prior written permission. + +THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND +ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED +WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE +DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR +ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES +(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; +LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON +ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS +SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + +*******************************************************************************/ +#ifndef __INCMVSysSataAddrDech +#define __INCMVSysSataAddrDech + +#include "mvCommon.h" +#include "ctrlEnv/mvCtrlEnvLib.h" +#include "ctrlEnv/sys/mvCpuIf.h" + + +#ifdef __cplusplus +extern "C" { +#endif + +typedef struct _mvSataDecWin +{ + MV_TARGET target; + MV_ADDR_WIN addrWin; /* An address window*/ + MV_BOOL enable; /* Address decode window is enabled/disabled */ + +} MV_SATA_DEC_WIN; + + +#define MV_SATA_MAX_ADDR_DECODE_WIN 4 + +#define MV_SATA_WIN_CTRL_REG(dev, win) (SATA_REG_BASE + 0x30 + ((win)<<4)) +#define MV_SATA_WIN_BASE_REG(dev, win) (SATA_REG_BASE + 0x34 + ((win)<<4)) + +/* BITs in Bridge Interrupt Cause and Mask registers */ +#define MV_SATA_ADDR_DECODE_ERROR_BIT 0 +#define MV_SATA_ADDR_DECODE_ERROR_MASK (1<= MV_SDMMC_MAX_ADDR_DECODE_WIN) + { + mvOsPrintf("%s: ERR. Invalid win num %d\n",__FUNCTION__, winNum); + return MV_BAD_PARAM; + } + + /* Check if the requested window overlapps with current windows */ + if (MV_TRUE == sdmmcWinOverlapDetect(dev, winNum, &pAddrDecWin->addrWin)) + { + mvOsPrintf("%s: ERR. Window %d overlap\n", __FUNCTION__, winNum); + return MV_ERROR; + } + + /* check if address is aligned to the size */ + if(MV_IS_NOT_ALIGN(pAddrDecWin->addrWin.baseLow, pAddrDecWin->addrWin.size)) + { + mvOsPrintf("mvSdmmcWinSet:Error setting SDMMC window %d to "\ + "target %s.\nAddress 0x%08x is unaligned to size 0x%x.\n", + winNum, + mvCtrlTargetNameGet(pAddrDecWin->target), + pAddrDecWin->addrWin.baseLow, + pAddrDecWin->addrWin.size); + return MV_ERROR; + } + + decRegs.baseReg = 0; + decRegs.sizeReg = 0; + + if (MV_OK != mvCtrlAddrDecToReg(&(pAddrDecWin->addrWin),&decRegs)) + { + mvOsPrintf("%s: mvCtrlAddrDecToReg Failed\n", __FUNCTION__); + return MV_ERROR; + } + + mvCtrlAttribGet(pAddrDecWin->target, &targetAttribs); + + /* set attributes */ + decRegs.sizeReg &= ~MV_SDMMC_WIN_ATTR_MASK; + decRegs.sizeReg |= (targetAttribs.attrib << MV_SDMMC_WIN_ATTR_OFFSET); + + /* set target ID */ + decRegs.sizeReg &= ~MV_SDMMC_WIN_TARGET_MASK; + decRegs.sizeReg |= (targetAttribs.targetId << MV_SDMMC_WIN_TARGET_OFFSET); + + if (pAddrDecWin->enable == MV_TRUE) + { + decRegs.sizeReg |= MV_SDMMC_WIN_ENABLE_MASK; + } + else + { + decRegs.sizeReg &= ~MV_SDMMC_WIN_ENABLE_MASK; + } + + MV_REG_WRITE( MV_SDMMC_WIN_CTRL_REG(dev, winNum), decRegs.sizeReg); + MV_REG_WRITE( MV_SDMMC_WIN_BASE_REG(dev, winNum), decRegs.baseReg); + + return MV_OK; +} + +/******************************************************************************* +* mvSdmmcWinGet - Get SDMMC peripheral target address window. +* +* DESCRIPTION: +* Get SDMMC peripheral target address window. +* +* INPUT: +* winNum - SDMMC target address decode window number. +*d +* OUTPUT: +* pAddrDecWin - SDMMC target window data structure. +* +* RETURN: +* MV_ERROR if register parameters are invalid. +* +*******************************************************************************/ +MV_STATUS mvSdmmcWinGet(int dev, MV_U32 winNum, MV_SDMMC_DEC_WIN *pAddrDecWin) +{ + MV_DEC_REGS decRegs; + MV_TARGET_ATTRIB targetAttrib; + + /* Parameter checking */ + if (winNum >= MV_SDMMC_MAX_ADDR_DECODE_WIN) + { + mvOsPrintf("%s (dev=%d): ERR. Invalid winNum %d\n", + __FUNCTION__, dev, winNum); + return MV_NOT_SUPPORTED; + } + + decRegs.baseReg = MV_REG_READ( MV_SDMMC_WIN_BASE_REG(dev, winNum) ); + decRegs.sizeReg = MV_REG_READ( MV_SDMMC_WIN_CTRL_REG(dev, winNum) ); + + if (MV_OK != mvCtrlRegToAddrDec(&decRegs, &pAddrDecWin->addrWin) ) + { + mvOsPrintf("%s: mvCtrlRegToAddrDec Failed\n", __FUNCTION__); + return MV_ERROR; + } + + /* attrib and targetId */ + targetAttrib.attrib = (decRegs.sizeReg & MV_SDMMC_WIN_ATTR_MASK) >> + MV_SDMMC_WIN_ATTR_OFFSET; + targetAttrib.targetId = (decRegs.sizeReg & MV_SDMMC_WIN_TARGET_MASK) >> + MV_SDMMC_WIN_TARGET_OFFSET; + + pAddrDecWin->target = mvCtrlTargetGet(&targetAttrib); + + /* Check if window is enabled */ + if(decRegs.sizeReg & MV_SDMMC_WIN_ENABLE_MASK) + { + pAddrDecWin->enable = MV_TRUE; + } + else + { + pAddrDecWin->enable = MV_FALSE; + } + return MV_OK; +} +/******************************************************************************* +* mvSdmmcAddrDecShow - Print the SDMMC address decode map. +* +* DESCRIPTION: +* This function print the SDMMC address decode map. +* +* INPUT: +* None. +* +* OUTPUT: +* None. +* +* RETURN: +* None. +* +*******************************************************************************/ +MV_VOID mvSdmmcAddrDecShow(MV_VOID) +{ + + MV_SDMMC_DEC_WIN win; + int i,j=0; + + + + if (MV_FALSE == mvCtrlPwrClckGet(SDIO_UNIT_ID, 0)) + return; + + mvOsOutput( "\n" ); + mvOsOutput( "SDMMC %d:\n", j ); + mvOsOutput( "----\n" ); + + for( i = 0; i < MV_SDMMC_MAX_ADDR_DECODE_WIN; i++ ) + { + memset( &win, 0, sizeof(MV_SDMMC_DEC_WIN) ); + + mvOsOutput( "win%d - ", i ); + + if( mvSdmmcWinGet(j, i, &win ) == MV_OK ) + { + if( win.enable ) + { + mvOsOutput( "%s base %08x, ", + mvCtrlTargetNameGet(win.target), win.addrWin.baseLow ); + mvOsOutput( "...." ); + + mvSizePrint( win.addrWin.size ); + + mvOsOutput( "\n" ); + } + else + mvOsOutput( "disable\n" ); + } + } +} + + +/******************************************************************************* +* mvSdmmcWinInit - Initialize the integrated SDMMC target address window. +* +* DESCRIPTION: +* Initialize the SDMMC peripheral target address window. +* +* INPUT: +* +* +* OUTPUT: +* +* +* RETURN: +* MV_ERROR if register parameters are invalid. +* +*******************************************************************************/ +MV_STATUS mvSdmmcWinInit(MV_VOID) +{ + int winNum; + MV_SDMMC_DEC_WIN sdmmcWin; + MV_CPU_DEC_WIN cpuAddrDecWin; + MV_U32 status, winPrioIndex = 0; + + /* Initiate Sdmmc address decode */ + + /* First disable all address decode windows */ + for(winNum = 0; winNum < MV_SDMMC_MAX_ADDR_DECODE_WIN; winNum++) + { + MV_U32 regVal = MV_REG_READ(MV_SDMMC_WIN_CTRL_REG(0, winNum)); + regVal &= ~MV_SDMMC_WIN_ENABLE_MASK; + MV_REG_WRITE(MV_SDMMC_WIN_CTRL_REG(0, winNum), regVal); + } + + winNum = 0; + while( (sdmmcAddrDecPrioTab[winPrioIndex] != TBL_TERM) && + (winNum < MV_SDMMC_MAX_ADDR_DECODE_WIN) ) + { + /* first get attributes from CPU If */ + status = mvCpuIfTargetWinGet(sdmmcAddrDecPrioTab[winPrioIndex], + &cpuAddrDecWin); + + if(MV_NO_SUCH == status) + { + winPrioIndex++; + continue; + } + if (MV_OK != status) + { + mvOsPrintf("%s: ERR. mvCpuIfTargetWinGet failed\n", __FUNCTION__); + return MV_ERROR; + } + + if (cpuAddrDecWin.enable == MV_TRUE) + { + sdmmcWin.addrWin.baseHigh = cpuAddrDecWin.addrWin.baseHigh; + sdmmcWin.addrWin.baseLow = cpuAddrDecWin.addrWin.baseLow; + sdmmcWin.addrWin.size = cpuAddrDecWin.addrWin.size; + sdmmcWin.enable = MV_TRUE; + sdmmcWin.target = sdmmcAddrDecPrioTab[winPrioIndex]; + + if(MV_OK != mvSdmmcWinSet(0/*dev*/, winNum, &sdmmcWin)) + { + return MV_ERROR; + } + winNum++; + } + winPrioIndex++; + } + return MV_OK; +} + + + diff --git a/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/kw_family/ctrlEnv/sys/mvSysSdmmc.h b/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/kw_family/ctrlEnv/sys/mvSysSdmmc.h new file mode 100644 index 0000000000..c2f9f79446 --- /dev/null +++ b/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/kw_family/ctrlEnv/sys/mvSysSdmmc.h @@ -0,0 +1,125 @@ + +/******************************************************************************* +Copyright (C) Marvell International Ltd. and its affiliates + +This software file (the "File") is owned and distributed by Marvell +International Ltd. and/or its affiliates ("Marvell") under the following +alternative licensing terms. Once you have made an election to distribute the +File under one of the following license alternatives, please (i) delete this +introductory statement regarding license alternatives, (ii) delete the two +license alternatives that you have not elected to use and (iii) preserve the +Marvell copyright notice above. + +******************************************************************************** +Marvell Commercial License Option + +If you received this File from Marvell and you have entered into a commercial +license agreement (a "Commercial License") with Marvell, the File is licensed +to you under the terms of the applicable Commercial License. + +******************************************************************************** +Marvell GPL License Option + +If you received this File from Marvell, you may opt to use, redistribute and/or +modify this File in accordance with the terms and conditions of the General +Public License Version 2, June 1991 (the "GPL License"), a copy of which is +available along with the File in the license.txt file or by writing to the Free +Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or +on the worldwide web at http://www.gnu.org/licenses/gpl.txt. + +THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED +WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY +DISCLAIMED. The GPL License provides additional details about this warranty +disclaimer. +******************************************************************************** +Marvell BSD License Option + +If you received this File from Marvell, you may opt to use, redistribute and/or +modify this File under the following licensing terms. +Redistribution and use in source and binary forms, with or without modification, +are permitted provided that the following conditions are met: + + * Redistributions of source code must retain the above copyright notice, + this list of conditions and the following disclaimer. + + * Redistributions in binary form must reproduce the above copyright + notice, this list of conditions and the following disclaimer in the + documentation and/or other materials provided with the distribution. + + * Neither the name of Marvell nor the names of its contributors may be + used to endorse or promote products derived from this software without + specific prior written permission. + +THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND +ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED +WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE +DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR +ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES +(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; +LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON +ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS +SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + +*******************************************************************************/ +#ifndef __INCMVSysSdmmcAddrDech +#define __INCMVSysSdmmcAddrDech + +#include "mvCommon.h" +#include "ctrlEnv/mvCtrlEnvLib.h" +#include "ctrlEnv/sys/mvCpuIf.h" + + +#ifdef __cplusplus +extern "C" { +#endif + +typedef struct _mvSdmmcDecWin +{ + MV_TARGET target; + MV_ADDR_WIN addrWin; /* An address window*/ + MV_BOOL enable; /* Address decode window is enabled/disabled */ + +} MV_SDMMC_DEC_WIN; + + +#define MV_SDMMC_MAX_ADDR_DECODE_WIN 4 + +#define MV_SDMMC_WIN_CTRL_REG(dev, win) (MV_SDIO_REG_BASE + 0x108 + ((win)<<3)) +#define MV_SDMMC_WIN_BASE_REG(dev, win) (MV_SDIO_REG_BASE + 0x10c + ((win)<<3)) + + +/* BITs in Windows 0-3 Control and Base Registers */ +#define MV_SDMMC_WIN_ENABLE_BIT 0 +#define MV_SDMMC_WIN_ENABLE_MASK (1<= TDM_MBUS_MAX_WIN) + { + mvOsPrintf("mvTdmWinSet: ERR. Invalid win num %d\n",winNum); + return MV_BAD_PARAM; + } + + /* Check if the requested window overlapps with current windows */ + if (MV_TRUE == tdmWinOverlapDetect(winNum, &pAddrDecWin->addrWin)) + { + mvOsPrintf("mvTdmWinSet: ERR. Window %d overlap\n", winNum); + return MV_ERROR; + } + + /* check if address is aligned to the size */ + if (MV_IS_NOT_ALIGN(pAddrDecWin->addrWin.baseLow, pAddrDecWin->addrWin.size)) + { + mvOsPrintf("mvTdmWinSet: Error setting TDM window %d to "\ + "target %s.\nAddress 0x%08x is unaligned to size 0x%x.\n", + winNum, + mvCtrlTargetNameGet(pAddrDecWin->target), + pAddrDecWin->addrWin.baseLow, + pAddrDecWin->addrWin.size); + return MV_ERROR; + } + + decRegs.baseReg = MV_REG_READ(TDM_WIN_BASE_REG(winNum)); + decRegs.sizeReg = (MV_REG_READ(TDM_WIN_CTRL_REG(winNum)) & TDM_WIN_SIZE_MASK) >> TDM_WIN_SIZE_OFFS; + + if (MV_OK != mvCtrlAddrDecToReg(&(pAddrDecWin->addrWin),&decRegs)) + { + mvOsPrintf("mvTdmWinSet: mvCtrlAddrDecToReg Failed\n"); + return MV_ERROR; + } + + mvCtrlAttribGet(pAddrDecWin->target, &targetAttribs); + + /* for the safe side we disable the window before writing the new + values */ + mvTdmWinEnable(winNum, MV_FALSE); + + ctrlReg |= (targetAttribs.attrib << TDM_WIN_ATTRIB_OFFS); + ctrlReg |= (targetAttribs.targetId << TDM_WIN_TARGET_OFFS); + ctrlReg |= (decRegs.sizeReg & TDM_WIN_SIZE_MASK); + + /* Write to address base and control registers */ + MV_REG_WRITE(TDM_WIN_BASE_REG(winNum), decRegs.baseReg); + MV_REG_WRITE(TDM_WIN_CTRL_REG(winNum), ctrlReg); + /* Enable address decode target window */ + if (pAddrDecWin->enable == MV_TRUE) + { + mvTdmWinEnable(winNum, MV_TRUE); + } + return MV_OK; +} + +/******************************************************************************* +* mvTdmWinGet - Get peripheral target address window. +* +* DESCRIPTION: +* Get TDM peripheral target address window. +* +* INPUT: +* winNum - TDM to target address decode window number. +* +* OUTPUT: +* pAddrDecWin - TDM target window data structure. +* +* RETURN: +* MV_ERROR if register parameters are invalid. +* +*******************************************************************************/ + +MV_STATUS mvTdmWinGet(MV_U32 winNum, MV_TDM_DEC_WIN *pAddrDecWin) +{ + + MV_DEC_REGS decRegs; + MV_TARGET_ATTRIB targetAttrib; + + /* Parameter checking */ + if (winNum >= TDM_MBUS_MAX_WIN) + { + mvOsPrintf("mvTdmWinGet: ERR. Invalid winNum %d\n", winNum); + return MV_NOT_SUPPORTED; + } + + decRegs.baseReg = MV_REG_READ(TDM_WIN_BASE_REG(winNum)); + decRegs.sizeReg = (MV_REG_READ(TDM_WIN_CTRL_REG(winNum)) & TDM_WIN_SIZE_MASK) >> TDM_WIN_SIZE_OFFS; + + if (MV_OK != mvCtrlRegToAddrDec(&decRegs,&(pAddrDecWin->addrWin))) + { + mvOsPrintf("mvTdmWinGet: mvCtrlRegToAddrDec Failed \n"); + return MV_ERROR; + } + + /* attrib and targetId */ + targetAttrib.attrib = + (MV_REG_READ(TDM_WIN_CTRL_REG(winNum)) & TDM_WIN_ATTRIB_MASK) >> TDM_WIN_ATTRIB_OFFS; + targetAttrib.targetId = + (MV_REG_READ(TDM_WIN_CTRL_REG(winNum)) & TDM_WIN_TARGET_MASK) >> TDM_WIN_TARGET_OFFS; + + pAddrDecWin->target = mvCtrlTargetGet(&targetAttrib); + + /* Check if window is enabled */ + if (MV_REG_READ(TDM_WIN_CTRL_REG(winNum)) & TDM_WIN_ENABLE_MASK) + { + pAddrDecWin->enable = MV_TRUE; + } + else + { + pAddrDecWin->enable = MV_FALSE; + } + + return MV_OK; +} + +/******************************************************************************* +* mvTdmWinEnable - Enable/disable a TDM to target address window +* +* DESCRIPTION: +* This function enable/disable a TDM to target address window. +* According to parameter 'enable' the routine will enable the +* window, thus enabling TDM accesses (before enabling the window it is +* tested for overlapping). Otherwise, the window will be disabled. +* +* INPUT: +* winNum - TDM to target address decode window number. +* enable - Enable/disable parameter. +* +* OUTPUT: +* N/A +* +* RETURN: +* MV_ERROR if decode window number was wrong or enabled window overlapps. +* +*******************************************************************************/ +MV_STATUS mvTdmWinEnable(int winNum, MV_BOOL enable) +{ + MV_TDM_DEC_WIN addrDecWin; + + if (MV_TRUE == enable) + { + if (winNum >= TDM_MBUS_MAX_WIN) + { + mvOsPrintf("mvTdmWinEnable:ERR. Invalid winNum%d\n",winNum); + return MV_ERROR; + } + + /* First check for overlap with other enabled windows */ + /* Get current window */ + if (MV_OK != mvTdmWinGet(winNum, &addrDecWin)) + { + mvOsPrintf("mvTdmWinEnable:ERR. targetWinGet fail\n"); + return MV_ERROR; + } + /* Check for overlapping */ + if (MV_FALSE == tdmWinOverlapDetect(winNum, &(addrDecWin.addrWin))) + { + /* No Overlap. Enable address decode target window */ + MV_REG_BIT_SET(TDM_WIN_CTRL_REG(winNum), TDM_WIN_ENABLE_MASK); + } + else + { /* Overlap detected */ + mvOsPrintf("mvTdmWinEnable:ERR. Overlap detected\n"); + return MV_ERROR; + } + } + else + { + MV_REG_BIT_RESET(TDM_WIN_CTRL_REG(winNum), TDM_WIN_ENABLE_MASK); + } + return MV_OK; +} + + +/******************************************************************************* +* tdmWinOverlapDetect - Detect TDM address windows overlapping +* +* DESCRIPTION: +* An unpredicted behaviour is expected in case TDM address decode +* windows overlapps. +* This function detects TDM address decode windows overlapping of a +* specified window. The function does not check the window itself for +* overlapping. The function also skipps disabled address decode windows. +* +* INPUT: +* winNum - address decode window number. +* pAddrDecWin - An address decode window struct. +* +* OUTPUT: +* None. +* +* RETURN: +* MV_TRUE if the given address window overlap current address +* decode map, MV_FALSE otherwise, MV_ERROR if reading invalid data +* from registers. +* +*******************************************************************************/ +static MV_STATUS tdmWinOverlapDetect(MV_U32 winNum, MV_ADDR_WIN *pAddrWin) +{ + MV_U32 winNumIndex; + MV_TDM_DEC_WIN addrDecWin; + + for (winNumIndex = 0; winNumIndex < TDM_MBUS_MAX_WIN; winNumIndex++) + { + /* Do not check window itself */ + if (winNumIndex == winNum) + { + continue; + } + /* Do not check disabled windows */ + if (MV_REG_READ(TDM_WIN_CTRL_REG(winNum)) & TDM_WIN_ENABLE_MASK) + { + /* Get window parameters */ + if (MV_OK != mvTdmWinGet(winNumIndex, &addrDecWin)) + { + DB(mvOsPrintf("dmaWinOverlapDetect: ERR. TargetWinGet failed\n")); + return MV_ERROR; + } + + if (MV_TRUE == ctrlWinOverlapTest(pAddrWin, &(addrDecWin.addrWin))) + { + return MV_TRUE; + } + } + } + return MV_FALSE; +} + +/******************************************************************************* +* mvTdmAddrDecShow - Print the TDM address decode map. +* +* DESCRIPTION: +* This function print the TDM address decode map. +* +* INPUT: +* None. +* +* OUTPUT: +* None. +* +* RETURN: +* None. +* +*******************************************************************************/ +MV_VOID mvTdmAddrDecShow(MV_VOID) +{ + MV_TDM_DEC_WIN win; + int i; + + mvOsOutput( "\n" ); + mvOsOutput( "TDM:\n" ); + mvOsOutput( "----\n" ); + + for( i = 0; i < TDM_MBUS_MAX_WIN; i++ ) + { + memset( &win, 0, sizeof(MV_TDM_DEC_WIN) ); + + mvOsOutput( "win%d - ", i ); + + if (mvTdmWinGet(i, &win ) == MV_OK ) + { + if( win.enable ) + { + mvOsOutput( "%s base %08x, ", + mvCtrlTargetNameGet(win.target), win.addrWin.baseLow); + mvOsOutput( "...." ); + mvSizePrint( win.addrWin.size ); + mvOsOutput( "\n" ); + } + else + mvOsOutput( "disable\n" ); + } + } +} + diff --git a/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/kw_family/ctrlEnv/sys/mvSysTdm.h b/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/kw_family/ctrlEnv/sys/mvSysTdm.h new file mode 100644 index 0000000000..0d3140f5e4 --- /dev/null +++ b/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/kw_family/ctrlEnv/sys/mvSysTdm.h @@ -0,0 +1,106 @@ +/******************************************************************************* +Copyright (C) Marvell International Ltd. and its affiliates + +This software file (the "File") is owned and distributed by Marvell +International Ltd. and/or its affiliates ("Marvell") under the following +alternative licensing terms. Once you have made an election to distribute the +File under one of the following license alternatives, please (i) delete this +introductory statement regarding license alternatives, (ii) delete the two +license alternatives that you have not elected to use and (iii) preserve the +Marvell copyright notice above. + +******************************************************************************** +Marvell Commercial License Option + +If you received this File from Marvell and you have entered into a commercial +license agreement (a "Commercial License") with Marvell, the File is licensed +to you under the terms of the applicable Commercial License. + +******************************************************************************** +Marvell GPL License Option + +If you received this File from Marvell, you may opt to use, redistribute and/or +modify this File in accordance with the terms and conditions of the General +Public License Version 2, June 1991 (the "GPL License"), a copy of which is +available along with the File in the license.txt file or by writing to the Free +Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or +on the worldwide web at http://www.gnu.org/licenses/gpl.txt. + +THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED +WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY +DISCLAIMED. The GPL License provides additional details about this warranty +disclaimer. +******************************************************************************** +Marvell BSD License Option + +If you received this File from Marvell, you may opt to use, redistribute and/or +modify this File under the following licensing terms. +Redistribution and use in source and binary forms, with or without modification, +are permitted provided that the following conditions are met: + + * Redistributions of source code must retain the above copyright notice, + this list of conditions and the following disclaimer. + + * Redistributions in binary form must reproduce the above copyright + notice, this list of conditions and the following disclaimer in the + documentation and/or other materials provided with the distribution. + + * Neither the name of Marvell nor the names of its contributors may be + used to endorse or promote products derived from this software without + specific prior written permission. + +THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND +ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED +WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE +DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR +ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES +(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; +LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON +ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS +SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + +*******************************************************************************/ + +#ifndef __INCmvSysTdmh +#define __INCmvSysTdmh + +#include "ctrlEnv/sys/mvCpuIf.h" +#include "ctrlEnv/mvCtrlEnvLib.h" +#include "ctrlEnv/mvCtrlEnvAddrDec.h" + +typedef struct _mvTdmDecWin +{ + MV_TARGET target; + MV_ADDR_WIN addrWin; /* An address window*/ + MV_BOOL enable; /* Address decode window is enabled/disabled */ +} MV_TDM_DEC_WIN; + +MV_STATUS mvTdmWinInit(MV_VOID); +MV_STATUS mvTdmWinSet(MV_U32 winNum, MV_TDM_DEC_WIN *pAddrDecWin); +MV_STATUS mvTdmWinGet(MV_U32 winNum, MV_TDM_DEC_WIN *pAddrDecWin); +MV_STATUS mvTdmWinEnable(int winNum, MV_BOOL enable); +MV_VOID mvTdmAddrDecShow(MV_VOID); + + +#define TDM_MBUS_MAX_WIN 4 +#define TDM_WIN_CTRL_REG(win) ((TDM_REG_BASE + 0x4030) + (win<<4)) +#define TDM_WIN_BASE_REG(win) ((TDM_REG_BASE +0x4034) + (win<<4)) + +/* TDM_WIN_CTRL_REG bits */ +#define TDM_WIN_ENABLE_OFFS 0 +#define TDM_WIN_ENABLE_MASK (1<= TSU_MAX_DECODE_WIN) + { + mvOsPrintf("mvTsuWinSet: ERR. Invalid win num %d\n",winNum); + return MV_BAD_PARAM; + } + + /* Check if the requested window overlapps with current windows */ + if(MV_TRUE == tsuWinOverlapDetect(winNum, &pAddrDecWin->addrWin)) + { + mvOsPrintf("mvTsuWinSet: ERR. Window %d overlap\n", winNum); + return MV_ERROR; + } + + /* check if address is aligned to the size */ + if(MV_IS_NOT_ALIGN(pAddrDecWin->addrWin.baseLow,pAddrDecWin->addrWin.size)) + { + mvOsPrintf("mvTsuWinSet: Error setting TSU window %d to target " + "%s.\nAddress 0x%08x is unaligned to size 0x%x.\n", + winNum, mvCtrlTargetNameGet(pAddrDecWin->target), + pAddrDecWin->addrWin.baseLow, + pAddrDecWin->addrWin.size); + return MV_ERROR; + } + + decRegs.baseReg = MV_REG_READ(MV_TSU_WIN_BASE_REG(winNum)); + decRegs.sizeReg = MV_REG_READ(MV_TSU_WIN_CTRL_REG(winNum)); + + if(MV_OK != mvCtrlAddrDecToReg(&(pAddrDecWin->addrWin),&decRegs)) + { + mvOsPrintf("mvTsuWinSet: mvCtrlAddrDecToReg Failed\n"); + return MV_ERROR; + } + + mvCtrlAttribGet(pAddrDecWin->target,&targetAttribs); + + /* set attributes */ + decRegs.sizeReg &= ~TSU_WIN_CTRL_ATTR_MASK; + decRegs.sizeReg |= targetAttribs.attrib << TSU_WIN_CTRL_ATTR_OFFS; + /* set target ID */ + decRegs.sizeReg &= ~TSU_WIN_CTRL_TARGET_MASK; + decRegs.sizeReg |= targetAttribs.targetId << TSU_WIN_CTRL_TARGET_OFFS; + + /* for the safe side we disable the window before writing the new */ + /* values */ + mvTsuWinEnable(winNum, MV_FALSE); + MV_REG_WRITE(MV_TSU_WIN_CTRL_REG(winNum),decRegs.sizeReg); + + /* Write to address decode Size Register */ + MV_REG_WRITE(MV_TSU_WIN_BASE_REG(winNum), decRegs.baseReg); + + /* Enable address decode target window */ + if(pAddrDecWin->enable == MV_TRUE) + { + mvTsuWinEnable(winNum,MV_TRUE); + } + + return MV_OK; +} + + +/******************************************************************************* +* mvTsuWinGet +* +* DESCRIPTION: +* Get TSU peripheral target address window. +* +* INPUT: +* winNum - TSU to target address decode window number. +* +* OUTPUT: +* pAddrDecWin - TSU target window data structure. +* +* RETURN: +* MV_ERROR if register parameters are invalid. +* +*******************************************************************************/ +MV_STATUS mvTsuWinGet(MV_U32 winNum, MV_TSU_DEC_WIN *pAddrDecWin) +{ + MV_DEC_REGS decRegs; + MV_TARGET_ATTRIB targetAttrib; + + /* Parameter checking */ + if(winNum >= TSU_MAX_DECODE_WIN) + { + mvOsPrintf("mvTsuWinGet: ERR. Invalid winNum %d\n", winNum); + return MV_NOT_SUPPORTED; + } + + decRegs.baseReg = MV_REG_READ(MV_TSU_WIN_BASE_REG(winNum)); + decRegs.sizeReg = MV_REG_READ(MV_TSU_WIN_CTRL_REG(winNum)); + + if(MV_OK != mvCtrlRegToAddrDec(&decRegs,&(pAddrDecWin->addrWin))) + { + mvOsPrintf("mvTsuWinGet: mvCtrlRegToAddrDec Failed \n"); + return MV_ERROR; + } + + /* attrib and targetId */ + targetAttrib.attrib = + (decRegs.sizeReg & TSU_WIN_CTRL_ATTR_MASK) >> TSU_WIN_CTRL_ATTR_OFFS; + targetAttrib.targetId = + (decRegs.sizeReg & TSU_WIN_CTRL_TARGET_MASK) >> TSU_WIN_CTRL_TARGET_OFFS; + + pAddrDecWin->target = mvCtrlTargetGet(&targetAttrib); + + /* Check if window is enabled */ + if((MV_REG_READ(MV_TSU_WIN_CTRL_REG(winNum)) & TSU_WIN_CTRL_EN_MASK)) + { + pAddrDecWin->enable = MV_TRUE; + } + else + { + pAddrDecWin->enable = MV_FALSE; + } + + return MV_OK; +} + + +/******************************************************************************* +* mvTsuWinEnable +* +* DESCRIPTION: +* This function enable/disable a TSU to target address window. +* According to parameter 'enable' the routine will enable the +* window, thus enabling TSU accesses (before enabling the window it is +* tested for overlapping). Otherwise, the window will be disabled. +* +* INPUT: +* winNum - TSU to target address decode window number. +* enable - Enable / disable parameter. +* +* OUTPUT: +* N/A +* +* RETURN: +* MV_ERROR if decode window number was wrong or enabled window overlapps. +* +*******************************************************************************/ +MV_STATUS mvTsuWinEnable(MV_U32 winNum,MV_BOOL enable) +{ + MV_TSU_DEC_WIN addrDecWin; + + /* Parameter checking */ + if(winNum >= TSU_MAX_DECODE_WIN) + { + mvOsPrintf("mvTsuWinEnable: ERR. Invalid winNum%d\n",winNum); + return MV_ERROR; + } + + if(enable == MV_TRUE) + { + /* First check for overlap with other enabled windows */ + /* Get current window. */ + if(MV_OK != mvTsuWinGet(winNum,&addrDecWin)) + { + mvOsPrintf("mvTsuWinEnable: ERR. targetWinGet fail\n"); + return MV_ERROR; + } + /* Check for overlapping. */ + if(MV_FALSE == tsuWinOverlapDetect(winNum,&(addrDecWin.addrWin))) + { + /* No Overlap. Enable address decode target window */ + MV_REG_BIT_SET(MV_TSU_WIN_CTRL_REG(winNum), + TSU_WIN_CTRL_EN_MASK); + } + else + { + /* Overlap detected */ + mvOsPrintf("mvTsuWinEnable: ERR. Overlap detected\n"); + return MV_ERROR; + } + } + else + { + /* Disable address decode target window */ + MV_REG_BIT_RESET(MV_TSU_WIN_CTRL_REG(winNum), + TSU_WIN_CTRL_EN_MASK); + } + return MV_OK; +} + +/******************************************************************************* +* mvTsuWinTargetGet +* +* DESCRIPTION: +* Get Window number associated with target +* +* INPUT: +* target - Target ID to get the window number for. +* OUTPUT: +* +* RETURN: +* window number or 0xFFFFFFFF on error. +* +*******************************************************************************/ +MV_U32 mvTsuWinTargetGet(MV_TARGET target) +{ + MV_TSU_DEC_WIN decWin; + MV_U32 winNum; + + /* Check parameters */ + if(target >= MAX_TARGETS) + { + mvOsPrintf("mvTsuWinTargetGet: target %d is Illigal\n", target); + return 0xffffffff; + } + + for(winNum = 0; winNum < TSU_MAX_DECODE_WIN; winNum++) + { + if(mvTsuWinGet(winNum,&decWin) != MV_OK) + { + mvOsPrintf("mvTsuWinGet: window returned error\n"); + return 0xffffffff; + } + + if (decWin.enable == MV_TRUE) + { + if(decWin.target == target) + { + return winNum; + } + } + } + return 0xFFFFFFFF; +} + + +/******************************************************************************* +* tsuWinOverlapDetect +* +* DESCRIPTION: +* Detect TSU address windows overlapping +* An unpredicted behaviur is expected in case TSU address decode +* windows overlapps. +* This function detects TSU address decode windows overlapping of a +* specified window. The function does not check the window itself for +* overlapping. The function also skipps disabled address decode windows. +* +* INPUT: +* winNum - address decode window number. +* pAddrDecWin - An address decode window struct. +* +* OUTPUT: +* None. +* +* RETURN: +* MV_TRUE if the given address window overlap current address +* decode map, MV_FALSE otherwise, MV_ERROR if reading invalid data +* from registers. +* +*******************************************************************************/ +static MV_STATUS tsuWinOverlapDetect(MV_U32 winNum, MV_ADDR_WIN *pAddrWin) +{ + MV_U32 ctrlReg; + MV_U32 winNumIndex; + MV_TSU_DEC_WIN addrDecWin; + + for(winNumIndex = 0; winNumIndex < TSU_MAX_DECODE_WIN; winNumIndex++) + { + /* Do not check window itself */ + if(winNumIndex == winNum) + { + continue; + } + + /* Do not check disabled windows */ + ctrlReg = MV_REG_READ(MV_TSU_WIN_CTRL_REG(winNumIndex)); + if((ctrlReg & TSU_WIN_CTRL_EN_MASK) == 0) + { + continue; + } + + /* Get window parameters */ + if (MV_OK != mvTsuWinGet(winNumIndex, &addrDecWin)) + { + mvOsPrintf("tsuWinOverlapDetect: ERR. mvTsuWinGet failed\n"); + return MV_ERROR; + } + + if (MV_TRUE == ctrlWinOverlapTest(pAddrWin, &(addrDecWin.addrWin))) + { + return MV_TRUE; + } + } + return MV_FALSE; +} + + +/******************************************************************************* +* mvTsuAddrDecShow +* +* DESCRIPTION: +* Print the TSU address decode map. +* +* INPUT: +* None. +* +* OUTPUT: +* None. +* +* RETURN: +* None. +* +*******************************************************************************/ +void mvTsuAddrDecShow(void) +{ + MV_TSU_DEC_WIN win; + int i; + + if (MV_FALSE == mvCtrlPwrClckGet(TS_UNIT_ID, 0)) + return; + + mvOsOutput( "\n" ); + mvOsOutput( "TSU:\n"); + mvOsOutput( "----\n" ); + + for(i = 0; i < TSU_MAX_DECODE_WIN; i++) + { + memset(&win, 0, sizeof(TSU_MAX_DECODE_WIN)); + mvOsOutput( "win%d - ", i ); + + if(mvTsuWinGet(i, &win ) == MV_OK ) + { + if(win.enable == MV_TRUE) + { + mvOsOutput("%s base %08x, ", + mvCtrlTargetNameGet(win.target), + win.addrWin.baseLow); + mvOsOutput( "...." ); + mvSizePrint(win.addrWin.size ); + mvOsOutput( "\n" ); + } + else + { + mvOsOutput( "disable\n" ); + } + } + } + return; +} + + +/******************************************************************************* +* mvTsuInit +* +* DESCRIPTION: +* Initialize the TSU unit, and get unit out of reset. +* +* INPUT: +* coreClock - The core clock at which the TSU should operate. +* mode - The mode on configure the unit into (serial/parallel). +* memHandle - Memory handle used for memory allocations. +* OUTPUT: +* None. +* RETURN: +* MV_OK - on success, +* +*******************************************************************************/ +MV_STATUS mvTsuInit(MV_TSU_CORE_CLOCK coreClock, MV_TSU_PORTS_MODE mode, + void *osHandle) +{ + MV_STATUS status; + + status = mvTsuWinInit(); + if(status == MV_OK) + status = mvTsuHalInit(coreClock,mode,osHandle); + + return status; +} diff --git a/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/kw_family/ctrlEnv/sys/mvSysTs.h b/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/kw_family/ctrlEnv/sys/mvSysTs.h new file mode 100644 index 0000000000..42825893cd --- /dev/null +++ b/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/kw_family/ctrlEnv/sys/mvSysTs.h @@ -0,0 +1,110 @@ +/******************************************************************************* +Copyright (C) Marvell International Ltd. and its affiliates + +This software file (the "File") is owned and distributed by Marvell +International Ltd. and/or its affiliates ("Marvell") under the following +alternative licensing terms. Once you have made an election to distribute the +File under one of the following license alternatives, please (i) delete this +introductory statement regarding license alternatives, (ii) delete the two +license alternatives that you have not elected to use and (iii) preserve the +Marvell copyright notice above. + +******************************************************************************** +Marvell Commercial License Option + +If you received this File from Marvell and you have entered into a commercial +license agreement (a "Commercial License") with Marvell, the File is licensed +to you under the terms of the applicable Commercial License. + +******************************************************************************** +Marvell GPL License Option + +If you received this File from Marvell, you may opt to use, redistribute and/or +modify this File in accordance with the terms and conditions of the General +Public License Version 2, June 1991 (the "GPL License"), a copy of which is +available along with the File in the license.txt file or by writing to the Free +Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or +on the worldwide web at http://www.gnu.org/licenses/gpl.txt. + +THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED +WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY +DISCLAIMED. The GPL License provides additional details about this warranty +disclaimer. +******************************************************************************** +Marvell BSD License Option + +If you received this File from Marvell, you may opt to use, redistribute and/or +modify this File under the following licensing terms. +Redistribution and use in source and binary forms, with or without modification, +are permitted provided that the following conditions are met: + + * Redistributions of source code must retain the above copyright notice, + this list of conditions and the following disclaimer. + + * Redistributions in binary form must reproduce the above copyright + notice, this list of conditions and the following disclaimer in the + documentation and/or other materials provided with the distribution. + + * Neither the name of Marvell nor the names of its contributors may be + used to endorse or promote products derived from this software without + specific prior written permission. + +THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND +ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED +WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE +DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR +ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES +(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; +LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON +ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS +SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + +*******************************************************************************/ + +#ifndef __INCmvSysTsh +#define __INCmvSysTsh + +#ifdef __cplusplus +extern "C" { +#endif /* __cplusplus */ + +/* includes */ +#include "ts/mvTsu.h" +#include "ctrlEnv/sys/mvCpuIf.h" +#include "ctrlEnv/mvCtrlEnvLib.h" +#include "ctrlEnv/mvCtrlEnvAddrDec.h" + +#define TSU_MAX_DECODE_WIN 4 + + +/*******************************************/ +/* TSU Windows Registers */ +/*******************************************/ +#define MV_TSU_WIN_CTRL_REG(win) (TSU_GLOBAL_REG_BASE +0x30 + 0x10 * win) +#define MV_TSU_WIN_BASE_REG(win) (TSU_GLOBAL_REG_BASE +0x34 + 0x10 * win) + +/* TSU windows control register. */ +#define TSU_WIN_CTRL_EN_MASK (0x1 << 0) +#define TSU_WIN_CTRL_TARGET_OFFS 4 +#define TSU_WIN_CTRL_TARGET_MASK (0xF << TSU_WIN_CTRL_TARGET_OFFS) +#define TSU_WIN_CTRL_ATTR_OFFS 8 +#define TSU_WIN_CTRL_ATTR_MASK (0xFF << TSU_WIN_CTRL_ATTR_OFFS) +#define TSU_WIN_CTRL_SIZE_OFFS 16 +#define TSU_WIN_CTRL_SIZE_MASK (0xFFFF << TSU_WIN_CTRL_SIZE_OFFS) + +/* TSU windows base register. */ +#define TSU_WIN_BASE_OFFS 16 +#define TSU_WIN_BASE_MASK (0xFFFF << TSU_WIN_BASE_OFFS) + +MV_STATUS mvTsuWinInit(void); + +void mvTsuAddrDecShow(void); +MV_STATUS mvTsuInit(MV_TSU_CORE_CLOCK coreClock, MV_TSU_PORTS_MODE mode, + void *osHandle); + +#ifdef __cplusplus +} +#endif /* __cplusplus */ + +#endif /* __INCmvTsh */ diff --git a/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/kw_family/ctrlEnv/sys/mvSysUsb.c b/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/kw_family/ctrlEnv/sys/mvSysUsb.c new file mode 100644 index 0000000000..195b5e13e3 --- /dev/null +++ b/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/kw_family/ctrlEnv/sys/mvSysUsb.c @@ -0,0 +1,497 @@ +/******************************************************************************* +Copyright (C) Marvell International Ltd. and its affiliates + +This software file (the "File") is owned and distributed by Marvell +International Ltd. and/or its affiliates ("Marvell") under the following +alternative licensing terms. Once you have made an election to distribute the +File under one of the following license alternatives, please (i) delete this +introductory statement regarding license alternatives, (ii) delete the two +license alternatives that you have not elected to use and (iii) preserve the +Marvell copyright notice above. + +******************************************************************************** +Marvell Commercial License Option + +If you received this File from Marvell and you have entered into a commercial +license agreement (a "Commercial License") with Marvell, the File is licensed +to you under the terms of the applicable Commercial License. + +******************************************************************************** +Marvell GPL License Option + +If you received this File from Marvell, you may opt to use, redistribute and/or +modify this File in accordance with the terms and conditions of the General +Public License Version 2, June 1991 (the "GPL License"), a copy of which is +available along with the File in the license.txt file or by writing to the Free +Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or +on the worldwide web at http://www.gnu.org/licenses/gpl.txt. + +THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED +WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY +DISCLAIMED. The GPL License provides additional details about this warranty +disclaimer. +******************************************************************************** +Marvell BSD License Option + +If you received this File from Marvell, you may opt to use, redistribute and/or +modify this File under the following licensing terms. +Redistribution and use in source and binary forms, with or without modification, +are permitted provided that the following conditions are met: + + * Redistributions of source code must retain the above copyright notice, + this list of conditions and the following disclaimer. + + * Redistributions in binary form must reproduce the above copyright + notice, this list of conditions and the following disclaimer in the + documentation and/or other materials provided with the distribution. + + * Neither the name of Marvell nor the names of its contributors may be + used to endorse or promote products derived from this software without + specific prior written permission. + +THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND +ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED +WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE +DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR +ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES +(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; +LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON +ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS +SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + +*******************************************************************************/ + +#include "ctrlEnv/sys/mvSysUsb.h" + +MV_TARGET usbAddrDecPrioTab[] = +{ +#if defined(MV_INCLUDE_SDRAM_CS0) + SDRAM_CS0, +#endif +#if defined(MV_INCLUDE_SDRAM_CS1) + SDRAM_CS1, +#endif +#if defined(MV_INCLUDE_SDRAM_CS2) + SDRAM_CS2, +#endif +#if defined(MV_INCLUDE_SDRAM_CS3) + SDRAM_CS3, +#endif +#if defined(MV_INCLUDE_CESA) && defined(USB_UNDERRUN_WA) + CRYPT_ENG, +#endif +#if defined(MV_INCLUDE_PEX) + PEX0_MEM, +#endif + TBL_TERM +}; + + + +MV_STATUS mvUsbInit(int dev, MV_BOOL isHost) +{ + MV_STATUS status; + + status = mvUsbWinInit(dev); + if(status != MV_OK) + return status; + + return mvUsbHalInit(dev, isHost); +} + + +/******************************************************************************* +* usbWinOverlapDetect - Detect USB address windows overlapping +* +* DESCRIPTION: +* An unpredicted behaviur is expected in case USB address decode +* windows overlapps. +* This function detects USB address decode windows overlapping of a +* specified window. The function does not check the window itself for +* overlapping. The function also skipps disabled address decode windows. +* +* INPUT: +* winNum - address decode window number. +* pAddrDecWin - An address decode window struct. +* +* OUTPUT: +* None. +* +* RETURN: +* MV_TRUE if the given address window overlap current address +* decode map, MV_FALSE otherwise, MV_ERROR if reading invalid data +* from registers. +* +*******************************************************************************/ +static MV_STATUS usbWinOverlapDetect(int dev, MV_U32 winNum, + MV_ADDR_WIN *pAddrWin) +{ + MV_U32 winNumIndex; + MV_DEC_WIN addrDecWin; + + for(winNumIndex=0; winNumIndex= MV_USB_MAX_ADDR_DECODE_WIN) + { + mvOsPrintf("%s: ERR. Invalid win num %d\n",__FUNCTION__, winNum); + return MV_BAD_PARAM; + } + + /* Check if the requested window overlapps with current windows */ + if (MV_TRUE == usbWinOverlapDetect(dev, winNum, &pDecWin->addrWin)) + { + mvOsPrintf("%s: ERR. Window %d overlap\n", __FUNCTION__, winNum); + return MV_ERROR; + } + + /* check if address is aligned to the size */ + if(MV_IS_NOT_ALIGN(pDecWin->addrWin.baseLow, pDecWin->addrWin.size)) + { + mvOsPrintf("mvUsbWinSet:Error setting USB window %d to "\ + "target %s.\nAddress 0x%08x is unaligned to size 0x%x.\n", + winNum, + mvCtrlTargetNameGet(pDecWin->target), + pDecWin->addrWin.baseLow, + pDecWin->addrWin.size); + return MV_ERROR; + } + + if(MV_OK != mvCtrlAddrDecToParams(pDecWin, &winParams)) + { + mvOsPrintf("%s: mvCtrlAddrDecToParams Failed\n", __FUNCTION__); + return MV_ERROR; + } + + /* set Size, Attributes and TargetID */ + sizeReg = (((winParams.targetId << MV_USB_WIN_TARGET_OFFSET) & MV_USB_WIN_TARGET_MASK) | + ((winParams.attrib << MV_USB_WIN_ATTR_OFFSET) & MV_USB_WIN_ATTR_MASK) | + ((winParams.size << MV_USB_WIN_SIZE_OFFSET) & MV_USB_WIN_SIZE_MASK)); + +#if defined(MV645xx) || defined(MV646xx) + /* If window is DRAM with HW cache coherency, make sure bit2 is set */ + sizeReg &= ~MV_USB_WIN_BURST_WR_LIMIT_MASK; + + if((MV_TARGET_IS_DRAM(pDecWin->target)) && + (pDecWin->addrWinAttr.cachePolicy != NO_COHERENCY)) + { + sizeReg |= MV_USB_WIN_BURST_WR_32BIT_LIMIT; + } + else + { + sizeReg |= MV_USB_WIN_BURST_WR_NO_LIMIT; + } +#endif /* MV645xx || MV646xx */ + + if (pDecWin->enable == MV_TRUE) + { + sizeReg |= MV_USB_WIN_ENABLE_MASK; + } + else + { + sizeReg &= ~MV_USB_WIN_ENABLE_MASK; + } + + /* Update Base value */ + baseReg = (winParams.baseAddr & MV_USB_WIN_BASE_MASK); + + MV_REG_WRITE( MV_USB_WIN_CTRL_REG(dev, winNum), sizeReg); + MV_REG_WRITE( MV_USB_WIN_BASE_REG(dev, winNum), baseReg); + + return MV_OK; +} + +/******************************************************************************* +* mvUsbWinGet - Get USB peripheral target address window. +* +* DESCRIPTION: +* Get USB peripheral target address window. +* +* INPUT: +* winNum - USB target address decode window number. +* +* OUTPUT: +* pDecWin - USB target window data structure. +* +* RETURN: +* MV_ERROR if register parameters are invalid. +* +*******************************************************************************/ +MV_STATUS mvUsbWinGet(int dev, MV_U32 winNum, MV_DEC_WIN *pDecWin) +{ + MV_DEC_WIN_PARAMS winParam; + MV_U32 sizeReg, baseReg; + + /* Parameter checking */ + if (winNum >= MV_USB_MAX_ADDR_DECODE_WIN) + { + mvOsPrintf("%s (dev=%d): ERR. Invalid winNum %d\n", + __FUNCTION__, dev, winNum); + return MV_NOT_SUPPORTED; + } + + baseReg = MV_REG_READ( MV_USB_WIN_BASE_REG(dev, winNum) ); + sizeReg = MV_REG_READ( MV_USB_WIN_CTRL_REG(dev, winNum) ); + + /* Check if window is enabled */ + if(sizeReg & MV_USB_WIN_ENABLE_MASK) + { + pDecWin->enable = MV_TRUE; + + /* Extract window parameters from registers */ + winParam.targetId = (sizeReg & MV_USB_WIN_TARGET_MASK) >> MV_USB_WIN_TARGET_OFFSET; + winParam.attrib = (sizeReg & MV_USB_WIN_ATTR_MASK) >> MV_USB_WIN_ATTR_OFFSET; + winParam.size = (sizeReg & MV_USB_WIN_SIZE_MASK) >> MV_USB_WIN_SIZE_OFFSET; + winParam.baseAddr = (baseReg & MV_USB_WIN_BASE_MASK); + + /* Translate the decode window parameters to address decode struct */ + if (MV_OK != mvCtrlParamsToAddrDec(&winParam, pDecWin)) + { + mvOsPrintf("Failed to translate register parameters to USB address" \ + " decode window structure\n"); + return MV_ERROR; + } + } + else + { + pDecWin->enable = MV_FALSE; + } + return MV_OK; +} + +/******************************************************************************* +* mvUsbWinInit - +* +* INPUT: +* +* OUTPUT: +* +* RETURN: +* MV_ERROR if register parameters are invalid. +* +*******************************************************************************/ +MV_STATUS mvUsbWinInit(int dev) +{ + MV_STATUS status; + MV_DEC_WIN usbWin; + MV_CPU_DEC_WIN cpuAddrDecWin; + int winNum; + MV_U32 winPrioIndex = 0; + + /* First disable all address decode windows */ + for(winNum = 0; winNum < MV_USB_MAX_ADDR_DECODE_WIN; winNum++) + { + MV_REG_BIT_RESET(MV_USB_WIN_CTRL_REG(dev, winNum), MV_USB_WIN_ENABLE_MASK); + } + + /* Go through all windows in user table until table terminator */ + winNum = 0; + while( (usbAddrDecPrioTab[winPrioIndex] != TBL_TERM) && + (winNum < MV_USB_MAX_ADDR_DECODE_WIN) ) + { + /* first get attributes from CPU If */ + status = mvCpuIfTargetWinGet(usbAddrDecPrioTab[winPrioIndex], + &cpuAddrDecWin); + + if(MV_NO_SUCH == status) + { + winPrioIndex++; + continue; + } + if (MV_OK != status) + { + mvOsPrintf("%s: ERR. mvCpuIfTargetWinGet failed\n", __FUNCTION__); + return MV_ERROR; + } + + if (cpuAddrDecWin.enable == MV_TRUE) + { + usbWin.addrWin.baseHigh = cpuAddrDecWin.addrWin.baseHigh; + usbWin.addrWin.baseLow = cpuAddrDecWin.addrWin.baseLow; + usbWin.addrWin.size = cpuAddrDecWin.addrWin.size; + usbWin.enable = MV_TRUE; + usbWin.target = usbAddrDecPrioTab[winPrioIndex]; + +#if defined(MV645xx) || defined(MV646xx) + /* Get the default attributes for that target window */ + mvCtrlDefAttribGet(usbWin.target, &usbWin.addrWinAttr); +#endif /* MV645xx || MV646xx */ + + if(MV_OK != mvUsbWinSet(dev, winNum, &usbWin)) + { + return MV_ERROR; + } + winNum++; + } + winPrioIndex++; + } + return MV_OK; +} + +/******************************************************************************* +* mvUsbAddrDecShow - Print the USB address decode map. +* +* DESCRIPTION: +* This function print the USB address decode map. +* +* INPUT: +* None. +* +* OUTPUT: +* None. +* +* RETURN: +* None. +* +*******************************************************************************/ +MV_VOID mvUsbAddrDecShow(MV_VOID) +{ + MV_DEC_WIN addrDecWin; + int i, winNum; + + mvOsOutput( "\n" ); + mvOsOutput( "USB:\n" ); + mvOsOutput( "----\n" ); + + for(i=0; i= XOR_MAX_ADDR_DEC_WIN) + { + DB(mvOsPrintf("%s: ERR. Invalid win num %d\n",__FUNCTION__, winNum)); + return MV_BAD_PARAM; + } + if (pAddrDecWin == NULL) + { + DB(mvOsPrintf("%s: ERR. pAddrDecWin is NULL pointer\n", __FUNCTION__ )); + return MV_BAD_PTR; + } + /* Check if the requested window overlaps with current windows */ + if (MV_TRUE == xorWinOverlapDetect(unit, winNum, &pAddrDecWin->addrWin)) + { + DB(mvOsPrintf("%s: ERR. Window %d overlap\n",__FUNCTION__,winNum)); + return MV_ERROR; + } + + xorDecRegs.baseReg = MV_REG_READ(XOR_BASE_ADDR_REG(unit,winNum)); + xorDecRegs.sizeReg = MV_REG_READ(XOR_SIZE_MASK_REG(unit,winNum)); + + /* Get Base Address and size registers values */ + if(MV_OK != mvCtrlAddrDecToReg(&pAddrDecWin->addrWin, &xorDecRegs)) + { + DB(mvOsPrintf("%s: ERR. Invalid addr dec window\n",__FUNCTION__)); + return MV_BAD_PARAM; + } + + + mvCtrlAttribGet(pAddrDecWin->target,&targetAttribs); + + /* set attributes */ + xorDecRegs.baseReg &= ~XEBARX_ATTR_MASK; + xorDecRegs.baseReg |= targetAttribs.attrib << XEBARX_ATTR_OFFS; + /* set target ID */ + xorDecRegs.baseReg &= ~XEBARX_TARGET_MASK; + xorDecRegs.baseReg |= targetAttribs.targetId << XEBARX_TARGET_OFFS; + + + /* Write to address decode Base Address Register */ + MV_REG_WRITE(XOR_BASE_ADDR_REG(unit,winNum), xorDecRegs.baseReg); + + /* Write to Size Register */ + MV_REG_WRITE(XOR_SIZE_MASK_REG(unit,winNum), xorDecRegs.sizeReg); + + for (chan = 0; chan < MV_XOR_MAX_CHAN_PER_UNIT; chan++) + { + if (pAddrDecWin->enable) + { + MV_REG_BIT_SET(XOR_WINDOW_CTRL_REG(unit,chan), + XEXWCR_WIN_EN_MASK(winNum)); + } + else + { + MV_REG_BIT_RESET(XOR_WINDOW_CTRL_REG(unit,chan), + XEXWCR_WIN_EN_MASK(winNum)); + } + } + return MV_OK; +} + +/******************************************************************************* +* mvXorTargetWinGet - Get xor peripheral target address window. +* +* DESCRIPTION: +* Get xor peripheral target address window. +* +* INPUT: +* winNum - One of the possible XOR memory decode windows. +* +* OUTPUT: +* base - Window base address. +* size - Window size. +* enable - window enable/disable. +* +* RETURN: +* MV_BAD_PARAM if parameters to function invalid, MV_OK otherwise. +* +*******************************************************************************/ +MV_STATUS mvXorTargetWinGet(MV_U32 unit,MV_U32 winNum, MV_XOR_DEC_WIN *pAddrDecWin) +{ + MV_DEC_REGS xorDecRegs; + MV_TARGET_ATTRIB targetAttrib; + MV_U32 chan=0,chanWinEn; + + /* Parameter checking */ + if (winNum >= XOR_MAX_ADDR_DEC_WIN) + { + DB(mvOsPrintf("%s: ERR. Invalid win num %d\n",__FUNCTION__ , winNum)); + return MV_ERROR; + } + + if (NULL == pAddrDecWin) + { + DB(mvOsPrintf("%s: ERR. pAddrDecWin is NULL pointer\n", __FUNCTION__ )); + return MV_BAD_PTR; + } + + chanWinEn = MV_REG_READ(XOR_WINDOW_CTRL_REG(unit,0)) & XEXWCR_WIN_EN_MASK(winNum); + + for (chan = 0; chan < MV_XOR_MAX_CHAN_PER_UNIT; chan++) /* we should scan here all channels per unit */ + { + /* Check if enable bit is equal for all channels */ + if ((MV_REG_READ(XOR_WINDOW_CTRL_REG(unit,chan)) & + XEXWCR_WIN_EN_MASK(winNum)) != chanWinEn) + { + mvOsPrintf("%s: ERR. Window enable field must be equal in " + "all channels(chan=%d)\n",__FUNCTION__, chan); + return MV_ERROR; + } + } + + + + xorDecRegs.baseReg = MV_REG_READ(XOR_BASE_ADDR_REG(unit,winNum)); + xorDecRegs.sizeReg = MV_REG_READ(XOR_SIZE_MASK_REG(unit,winNum)); + + if (MV_OK != mvCtrlRegToAddrDec(&xorDecRegs, &pAddrDecWin->addrWin)) + { + mvOsPrintf("%s: ERR. mvCtrlRegToAddrDec failed\n", __FUNCTION__); + return MV_ERROR; + } + + /* attrib and targetId */ + targetAttrib.attrib = + (xorDecRegs.baseReg & XEBARX_ATTR_MASK) >> XEBARX_ATTR_OFFS; + targetAttrib.targetId = + (xorDecRegs.baseReg & XEBARX_TARGET_MASK) >> XEBARX_TARGET_OFFS; + + + pAddrDecWin->target = mvCtrlTargetGet(&targetAttrib); + + if(chanWinEn) + { + pAddrDecWin->enable = MV_TRUE; + } + else pAddrDecWin->enable = MV_FALSE; + + return MV_OK; +} + +/******************************************************************************* +* mvXorTargetWinEnable - Enable/disable a Xor address decode window +* +* DESCRIPTION: +* This function enable/disable a XOR address decode window. +* if parameter 'enable' == MV_TRUE the routine will enable the +* window, thus enabling XOR accesses (before enabling the window it is +* tested for overlapping). Otherwise, the window will be disabled. +* +* INPUT: +* winNum - Decode window number. +* enable - Enable/disable parameter. +* +* OUTPUT: +* None. +* +* RETURN: +* MV_BAD_PARAM if parameters to function invalid, MV_OK otherwise. +* +*******************************************************************************/ +MV_STATUS mvXorTargetWinEnable(MV_U32 unit,MV_U32 winNum, MV_BOOL enable) +{ + MV_XOR_DEC_WIN addrDecWin; + MV_U32 chan; + + /* Parameter checking */ + if (winNum >= XOR_MAX_ADDR_DEC_WIN) + { + DB(mvOsPrintf("%s: ERR. Invalid winNum%d\n", __FUNCTION__, winNum)); + return MV_ERROR; + } + + if (enable == MV_TRUE) + { + /* Get current window */ + if (MV_OK != mvXorTargetWinGet(unit,winNum, &addrDecWin)) + { + DB(mvOsPrintf("%s: ERR. targetWinGet fail\n", __FUNCTION__)); + return MV_ERROR; + } + + /* Check for overlapping */ + if (MV_TRUE == xorWinOverlapDetect(unit,winNum, &(addrDecWin.addrWin))) + { + /* Overlap detected */ + DB(mvOsPrintf("%s: ERR. Overlap detected\n", __FUNCTION__)); + return MV_ERROR; + } + + /* No Overlap. Enable address decode target window */ + for (chan = 0; chan < MV_XOR_MAX_CHAN_PER_UNIT; chan++) + { + MV_REG_BIT_SET(XOR_WINDOW_CTRL_REG(unit,chan), + XEXWCR_WIN_EN_MASK(winNum)); + } + + } + else + { + /* Disable address decode target window */ + + for (chan = 0; chan < MV_XOR_MAX_CHAN_PER_UNIT; chan++) + { + MV_REG_BIT_RESET(XOR_WINDOW_CTRL_REG(unit,chan), + XEXWCR_WIN_EN_MASK(winNum)); + } + + } + + return MV_OK; +} + +/******************************************************************************* +* mvXorSetProtWinSet - Configure access attributes of a XOR engine +* to one of the XOR memory windows. +* +* DESCRIPTION: +* Each engine can be configured with access attributes for each of the +* memory spaces. This function sets access attributes +* to a given window for the given engine +* +* INPUTS: +* chan - One of the possible engines. +* winNum - One of the possible XOR memory spaces. +* access - Protection access rights. +* write - Write rights. +* +* OUTPUT: +* None. +* +* RETURN: +* MV_BAD_PARAM if parameters to function invalid, MV_OK otherwise. +* +*******************************************************************************/ +MV_STATUS mvXorProtWinSet (MV_U32 unit,MV_U32 chan, MV_U32 winNum, MV_BOOL access, + MV_BOOL write) +{ + MV_U32 temp; + + /* Parameter checking */ + if (chan >= MV_XOR_MAX_CHAN_PER_UNIT) + { + DB(mvOsPrintf("%s: ERR. Invalid chan num %d\n", __FUNCTION__ , chan)); + return MV_BAD_PARAM; + } + if (winNum >= XOR_MAX_ADDR_DEC_WIN) + { + DB(mvOsPrintf("%s: ERR. Invalid win num %d\n", __FUNCTION__, winNum)); + return MV_BAD_PARAM; + } + + temp = MV_REG_READ(XOR_WINDOW_CTRL_REG(unit,chan)) & + (~XEXWCR_WIN_ACC_MASK(winNum)); + + /* if access is disable */ + if (!access) + { + /* disable access */ + temp |= XEXWCR_WIN_ACC_NO_ACC(winNum); + } + /* if access is enable */ + else + { + /* if write is enable */ + if (write) + { + /* enable write */ + temp |= XEXWCR_WIN_ACC_RW(winNum); + } + /* if write is disable */ + else + { + /* disable write */ + temp |= XEXWCR_WIN_ACC_RO(winNum); + } + } + MV_REG_WRITE(XOR_WINDOW_CTRL_REG(unit,chan),temp); + return MV_OK; +} + +/******************************************************************************* +* mvXorPciRemap - Set XOR remap register for PCI address windows. +* +* DESCRIPTION: +* only Windows 0-3 can be remapped. +* +* INPUT: +* winNum - window number +* pAddrDecWin - pointer to address space window structure +* OUTPUT: +* None. +* +* RETURN: +* MV_BAD_PARAM if parameters to function invalid, MV_OK otherwise. +* +*******************************************************************************/ +MV_STATUS mvXorPciRemap(MV_U32 unit,MV_U32 winNum, MV_U32 addrHigh) +{ + /* Parameter checking */ + if (winNum >= XOR_MAX_REMAP_WIN) + { + DB(mvOsPrintf("%s: ERR. Invalid win num %d\n", __FUNCTION__, winNum)); + return MV_BAD_PARAM; + } + + MV_REG_WRITE(XOR_HIGH_ADDR_REMAP_REG(unit,winNum), addrHigh); + + return MV_OK; +} + +/******************************************************************************* +* xorWinOverlapDetect - Detect XOR address windows overlaping +* +* DESCRIPTION: +* An unpredicted behaviour is expected in case XOR address decode +* windows overlaps. +* This function detects XOR address decode windows overlaping of a +* specified window. The function does not check the window itself for +* overlaping. The function also skipps disabled address decode windows. +* +* INPUT: +* winNum - address decode window number. +* pAddrDecWin - An address decode window struct. +* +* OUTPUT: +* None. +* +* RETURN: +* MV_TRUE if the given address window overlap current address +* decode map, MV_FALSE otherwise, MV_ERROR if reading invalid data +* from registers. +* +*******************************************************************************/ +static MV_STATUS xorWinOverlapDetect(MV_U32 unit,MV_U32 winNum, MV_ADDR_WIN *pAddrWin) +{ + MV_U32 baseAddrEnableReg; + MV_U32 winNumIndex,chan; + MV_XOR_DEC_WIN addrDecWin; + + if (pAddrWin == NULL) + { + DB(mvOsPrintf("%s: ERR. pAddrWin is NULL pointer\n", __FUNCTION__ )); + return MV_BAD_PTR; + } + + for (chan = 0; chan < MV_XOR_MAX_CHAN_PER_UNIT; chan++) + { + /* Read base address enable register. Do not check disabled windows */ + baseAddrEnableReg = MV_REG_READ(XOR_WINDOW_CTRL_REG(unit,chan)); + + for (winNumIndex = 0; winNumIndex < XOR_MAX_ADDR_DEC_WIN; winNumIndex++) + { + /* Do not check window itself */ + if (winNumIndex == winNum) + { + continue; + } + + /* Do not check disabled windows */ + if ((baseAddrEnableReg & XEXWCR_WIN_EN_MASK(winNumIndex)) == 0) + { + continue; + } + + /* Get window parameters */ + if (MV_OK != mvXorTargetWinGet(unit,winNumIndex, &addrDecWin)) + { + DB(mvOsPrintf("%s: ERR. TargetWinGet failed\n", __FUNCTION__ )); + return MV_ERROR; + } + + if (MV_TRUE == ctrlWinOverlapTest(pAddrWin, &(addrDecWin.addrWin))) + { + return MV_TRUE; + } + } + } + + return MV_FALSE; +} + +static MV_VOID mvXorAddrDecShowUnit(MV_U32 unit) +{ + MV_XOR_DEC_WIN win; + int i; + + mvOsOutput( "\n" ); + mvOsOutput( "XOR %d:\n", unit ); + mvOsOutput( "----\n" ); + + for( i = 0; i < XOR_MAX_ADDR_DEC_WIN; i++ ) + { + memset( &win, 0, sizeof(MV_XOR_DEC_WIN) ); + + mvOsOutput( "win%d - ", i ); + + if( mvXorTargetWinGet(unit, i, &win ) == MV_OK ) + { + if( win.enable ) + { + mvOsOutput( "%s base %x, ", + mvCtrlTargetNameGet(win.target), win.addrWin.baseLow ); + + mvSizePrint( win.addrWin.size ); + + mvOsOutput( "\n" ); + } + else + mvOsOutput( "disable\n" ); + } + } +} + +/******************************************************************************* +* mvXorAddrDecShow - Print the XOR address decode map. +* +* DESCRIPTION: +* This function print the XOR address decode map. +* +* INPUT: +* None. +* +* OUTPUT: +* None. +* +* RETURN: +* None. +* +*******************************************************************************/ +MV_VOID mvXorAddrDecShow(MV_VOID) +{ + int i; + + for( i = 0; i < MV_XOR_MAX_UNIT; i++ ) + mvXorAddrDecShowUnit(i); + +} diff --git a/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/kw_family/ctrlEnv/sys/mvSysXor.h b/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/kw_family/ctrlEnv/sys/mvSysXor.h new file mode 100644 index 0000000000..73b2d9e6a4 --- /dev/null +++ b/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/kw_family/ctrlEnv/sys/mvSysXor.h @@ -0,0 +1,140 @@ +/******************************************************************************* +Copyright (C) Marvell International Ltd. and its affiliates + +This software file (the "File") is owned and distributed by Marvell +International Ltd. and/or its affiliates ("Marvell") under the following +alternative licensing terms. Once you have made an election to distribute the +File under one of the following license alternatives, please (i) delete this +introductory statement regarding license alternatives, (ii) delete the two +license alternatives that you have not elected to use and (iii) preserve the +Marvell copyright notice above. + +******************************************************************************** +Marvell Commercial License Option + +If you received this File from Marvell and you have entered into a commercial +license agreement (a "Commercial License") with Marvell, the File is licensed +to you under the terms of the applicable Commercial License. + +******************************************************************************** +Marvell GPL License Option + +If you received this File from Marvell, you may opt to use, redistribute and/or +modify this File in accordance with the terms and conditions of the General +Public License Version 2, June 1991 (the "GPL License"), a copy of which is +available along with the File in the license.txt file or by writing to the Free +Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or +on the worldwide web at http://www.gnu.org/licenses/gpl.txt. + +THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED +WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY +DISCLAIMED. The GPL License provides additional details about this warranty +disclaimer. +******************************************************************************** +Marvell BSD License Option + +If you received this File from Marvell, you may opt to use, redistribute and/or +modify this File under the following licensing terms. +Redistribution and use in source and binary forms, with or without modification, +are permitted provided that the following conditions are met: + + * Redistributions of source code must retain the above copyright notice, + this list of conditions and the following disclaimer. + + * Redistributions in binary form must reproduce the above copyright + notice, this list of conditions and the following disclaimer in the + documentation and/or other materials provided with the distribution. + + * Neither the name of Marvell nor the names of its contributors may be + used to endorse or promote products derived from this software without + specific prior written permission. + +THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND +ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED +WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE +DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR +ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES +(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; +LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON +ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS +SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + +*******************************************************************************/ + +#ifndef __INCMVSysXorh +#define __INCMVSysXorh + + +#ifdef __cplusplus +extern "C" { +#endif + +#include "ctrlEnv/sys/mvCpuIf.h" + +#include "ctrlEnv/mvCtrlEnvLib.h" +#include "ctrlEnv/mvCtrlEnvAddrDec.h" + +#define XOR_MAX_ADDR_DEC_WIN 8 /* Maximum address decode windows */ +#define XOR_MAX_REMAP_WIN 4 /* Maximum address arbiter windows */ + +/* XOR Engine Address Decoding Register Map */ +#define XOR_WINDOW_CTRL_REG(unit,chan) (XOR_UNIT_BASE(unit)+(0x240 + ((chan) * 4))) +#define XOR_BASE_ADDR_REG(unit,winNum) (XOR_UNIT_BASE(unit)+(0x250 + ((winNum) * 4))) +#define XOR_SIZE_MASK_REG(unit,winNum) (XOR_UNIT_BASE(unit)+(0x270 + ((winNum) * 4))) +#define XOR_HIGH_ADDR_REMAP_REG(unit,winNum) (XOR_UNIT_BASE(unit)+(0x290 + ((winNum) * 4))) + +/* XOR Engine [0..1] Window Control Registers (XExWCR) */ +#define XEXWCR_WIN_EN_OFFS(winNum) (winNum) +#define XEXWCR_WIN_EN_MASK(winNum) (1 << (XEXWCR_WIN_EN_OFFS(winNum))) +#define XEXWCR_WIN_EN_ENABLE(winNum) (1 << (XEXWCR_WIN_EN_OFFS(winNum))) +#define XEXWCR_WIN_EN_DISABLE(winNum) (0 << (XEXWCR_WIN_EN_OFFS(winNum))) + +#define XEXWCR_WIN_ACC_OFFS(winNum) ((2 * winNum) + 16) +#define XEXWCR_WIN_ACC_MASK(winNum) (3 << (XEXWCR_WIN_ACC_OFFS(winNum))) +#define XEXWCR_WIN_ACC_NO_ACC(winNum) (0 << (XEXWCR_WIN_ACC_OFFS(winNum))) +#define XEXWCR_WIN_ACC_RO(winNum) (1 << (XEXWCR_WIN_ACC_OFFS(winNum))) +#define XEXWCR_WIN_ACC_RW(winNum) (3 << (XEXWCR_WIN_ACC_OFFS(winNum))) + +/* XOR Engine Base Address Registers (XEBARx) */ +#define XEBARX_TARGET_OFFS (0) +#define XEBARX_TARGET_MASK (0xF << XEBARX_TARGET_OFFS) +#define XEBARX_ATTR_OFFS (8) +#define XEBARX_ATTR_MASK (0xFF << XEBARX_ATTR_OFFS) +#define XEBARX_BASE_OFFS (16) +#define XEBARX_BASE_MASK (0xFFFF << XEBARX_BASE_OFFS) + +/* XOR Engine Size Mask Registers (XESMRx) */ +#define XESMRX_SIZE_MASK_OFFS (16) +#define XESMRX_SIZE_MASK_MASK (0xFFFF << XESMRX_SIZE_MASK_OFFS) + +/* XOR Engine High Address Remap Register (XEHARRx1) */ +#define XEHARRX_REMAP_OFFS (0) +#define XEHARRX_REMAP_MASK (0xFFFFFFFF << XEHARRX_REMAP_OFFS) + +typedef struct _mvXorDecWin +{ + MV_TARGET target; + MV_ADDR_WIN addrWin; /* An address window*/ + MV_BOOL enable; /* Address decode window is enabled/disabled */ + +}MV_XOR_DEC_WIN; + +MV_STATUS mvXorInit (MV_VOID); +MV_STATUS mvXorTargetWinSet(MV_U32 unit, MV_U32 winNum, + MV_XOR_DEC_WIN *pAddrDecWin); +MV_STATUS mvXorTargetWinGet(MV_U32 unit, MV_U32 winNum, + MV_XOR_DEC_WIN *pAddrDecWin); +MV_STATUS mvXorTargetWinEnable(MV_U32 unit, + MV_U32 winNum, MV_BOOL enable); +MV_STATUS mvXorProtWinSet (MV_U32 unit,MV_U32 chan, MV_U32 winNum, MV_BOOL access, + MV_BOOL write); +MV_STATUS mvXorPciRemap(MV_U32 unit, MV_U32 winNum, MV_U32 addrHigh); + +MV_VOID mvXorAddrDecShow(MV_VOID); + +#ifdef __cplusplus +} +#endif + +#endif diff --git a/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/kw_family/device/mvDevice.c b/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/kw_family/device/mvDevice.c new file mode 100644 index 0000000000..80325fc12d --- /dev/null +++ b/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/kw_family/device/mvDevice.c @@ -0,0 +1,75 @@ +/******************************************************************************* +Copyright (C) Marvell International Ltd. and its affiliates + +This software file (the "File") is owned and distributed by Marvell +International Ltd. and/or its affiliates ("Marvell") under the following +alternative licensing terms. Once you have made an election to distribute the +File under one of the following license alternatives, please (i) delete this +introductory statement regarding license alternatives, (ii) delete the two +license alternatives that you have not elected to use and (iii) preserve the +Marvell copyright notice above. + +******************************************************************************** +Marvell Commercial License Option + +If you received this File from Marvell and you have entered into a commercial +license agreement (a "Commercial License") with Marvell, the File is licensed +to you under the terms of the applicable Commercial License. + +******************************************************************************** +Marvell GPL License Option + +If you received this File from Marvell, you may opt to use, redistribute and/or +modify this File in accordance with the terms and conditions of the General +Public License Version 2, June 1991 (the "GPL License"), a copy of which is +available along with the File in the license.txt file or by writing to the Free +Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or +on the worldwide web at http://www.gnu.org/licenses/gpl.txt. + +THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED +WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY +DISCLAIMED. The GPL License provides additional details about this warranty +disclaimer. +******************************************************************************** +Marvell BSD License Option + +If you received this File from Marvell, you may opt to use, redistribute and/or +modify this File under the following licensing terms. +Redistribution and use in source and binary forms, with or without modification, +are permitted provided that the following conditions are met: + + * Redistributions of source code must retain the above copyright notice, + this list of conditions and the following disclaimer. + + * Redistributions in binary form must reproduce the above copyright + notice, this list of conditions and the following disclaimer in the + documentation and/or other materials provided with the distribution. + + * Neither the name of Marvell nor the names of its contributors may be + used to endorse or promote products derived from this software without + specific prior written permission. + +THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND +ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED +WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE +DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR +ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES +(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; +LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON +ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS +SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + +*******************************************************************************/ + +#include "device/mvDevice.h" + +/* defines */ +#ifdef MV_DEBUG + #define DB(x) x +#else + #define DB(x) +#endif + + + diff --git a/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/kw_family/device/mvDevice.h b/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/kw_family/device/mvDevice.h new file mode 100644 index 0000000000..9350779668 --- /dev/null +++ b/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/kw_family/device/mvDevice.h @@ -0,0 +1,74 @@ +/******************************************************************************* +Copyright (C) Marvell International Ltd. and its affiliates + +This software file (the "File") is owned and distributed by Marvell +International Ltd. and/or its affiliates ("Marvell") under the following +alternative licensing terms. Once you have made an election to distribute the +File under one of the following license alternatives, please (i) delete this +introductory statement regarding license alternatives, (ii) delete the two +license alternatives that you have not elected to use and (iii) preserve the +Marvell copyright notice above. + +******************************************************************************** +Marvell Commercial License Option + +If you received this File from Marvell and you have entered into a commercial +license agreement (a "Commercial License") with Marvell, the File is licensed +to you under the terms of the applicable Commercial License. + +******************************************************************************** +Marvell GPL License Option + +If you received this File from Marvell, you may opt to use, redistribute and/or +modify this File in accordance with the terms and conditions of the General +Public License Version 2, June 1991 (the "GPL License"), a copy of which is +available along with the File in the license.txt file or by writing to the Free +Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or +on the worldwide web at http://www.gnu.org/licenses/gpl.txt. + +THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED +WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY +DISCLAIMED. The GPL License provides additional details about this warranty +disclaimer. +******************************************************************************** +Marvell BSD License Option + +If you received this File from Marvell, you may opt to use, redistribute and/or +modify this File under the following licensing terms. +Redistribution and use in source and binary forms, with or without modification, +are permitted provided that the following conditions are met: + + * Redistributions of source code must retain the above copyright notice, + this list of conditions and the following disclaimer. + + * Redistributions in binary form must reproduce the above copyright + notice, this list of conditions and the following disclaimer in the + documentation and/or other materials provided with the distribution. + + * Neither the name of Marvell nor the names of its contributors may be + used to endorse or promote products derived from this software without + specific prior written permission. + +THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND +ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED +WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE +DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR +ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES +(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; +LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON +ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS +SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + +*******************************************************************************/ + +#ifndef __INCmvDeviceH +#define __INCmvDeviceH + +#include "mvCommon.h" +#include "mvOs.h" +#include "ctrlEnv/mvCtrlEnvSpec.h" +#include "device/mvDeviceRegs.h" + + +#endif /* #ifndef __INCmvDeviceH */ diff --git a/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/kw_family/device/mvDeviceRegs.h b/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/kw_family/device/mvDeviceRegs.h new file mode 100644 index 0000000000..80778ad935 --- /dev/null +++ b/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/kw_family/device/mvDeviceRegs.h @@ -0,0 +1,101 @@ +/******************************************************************************* +Copyright (C) Marvell International Ltd. and its affiliates + +This software file (the "File") is owned and distributed by Marvell +International Ltd. and/or its affiliates ("Marvell") under the following +alternative licensing terms. Once you have made an election to distribute the +File under one of the following license alternatives, please (i) delete this +introductory statement regarding license alternatives, (ii) delete the two +license alternatives that you have not elected to use and (iii) preserve the +Marvell copyright notice above. + +******************************************************************************** +Marvell Commercial License Option + +If you received this File from Marvell and you have entered into a commercial +license agreement (a "Commercial License") with Marvell, the File is licensed +to you under the terms of the applicable Commercial License. + +******************************************************************************** +Marvell GPL License Option + +If you received this File from Marvell, you may opt to use, redistribute and/or +modify this File in accordance with the terms and conditions of the General +Public License Version 2, June 1991 (the "GPL License"), a copy of which is +available along with the File in the license.txt file or by writing to the Free +Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or +on the worldwide web at http://www.gnu.org/licenses/gpl.txt. + +THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED +WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY +DISCLAIMED. The GPL License provides additional details about this warranty +disclaimer. +******************************************************************************** +Marvell BSD License Option + +If you received this File from Marvell, you may opt to use, redistribute and/or +modify this File under the following licensing terms. +Redistribution and use in source and binary forms, with or without modification, +are permitted provided that the following conditions are met: + + * Redistributions of source code must retain the above copyright notice, + this list of conditions and the following disclaimer. + + * Redistributions in binary form must reproduce the above copyright + notice, this list of conditions and the following disclaimer in the + documentation and/or other materials provided with the distribution. + + * Neither the name of Marvell nor the names of its contributors may be + used to endorse or promote products derived from this software without + specific prior written permission. + +THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND +ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED +WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE +DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR +ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES +(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; +LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON +ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS +SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + +*******************************************************************************/ + +#ifndef __INCmvDeviceRegsH +#define __INCmvDeviceRegsH + +#ifndef MV_ASMLANGUAGE +#include "ctrlEnv/mvCtrlEnvLib.h" +/* This enumerator describes the Marvell controller possible devices that */ +/* can be connected to its device interface. */ +typedef enum _mvDevice +{ +#if defined(MV_INCLUDE_DEVICE_CS0) + DEV_CS0 = 0, /* Device connected to dev CS[0] */ +#endif +#if defined(MV_INCLUDE_DEVICE_CS1) + DEV_CS1 = 1, /* Device connected to dev CS[1] */ +#endif +#if defined(MV_INCLUDE_DEVICE_CS2) + DEV_CS2 = 2, /* Device connected to dev CS[2] */ +#endif +#if defined(MV_INCLUDE_DEVICE_CS3) + DEV_CS3 = 3, /* Device connected to dev CS[2] */ +#endif +#if defined(MV_INCLUDE_DEVICE_CS4) + DEV_CS4 = 4, /* Device connected to BOOT dev */ +#endif + MV_DEV_MAX_CS = MV_DEVICE_MAX_CS +}MV_DEVICE; + + +#endif /* MV_ASMLANGUAGE */ + + +#define NAND_CTRL_REG 0x10470 + +#define NAND_ACTCEBOOT_BIT BIT1 + + +#endif /* #ifndef __INCmvDeviceRegsH */ diff --git a/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/linux_oss/mvOs.c b/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/linux_oss/mvOs.c new file mode 100644 index 0000000000..75f7e88cf6 --- /dev/null +++ b/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/linux_oss/mvOs.c @@ -0,0 +1,211 @@ +/******************************************************************************* +Copyright (C) Marvell International Ltd. and its affiliates + +This software file (the "File") is owned and distributed by Marvell +International Ltd. and/or its affiliates ("Marvell") under the following +alternative licensing terms. Once you have made an election to distribute the +File under one of the following license alternatives, please (i) delete this +introductory statement regarding license alternatives, (ii) delete the two +license alternatives that you have not elected to use and (iii) preserve the +Marvell copyright notice above. + + +******************************************************************************** +Marvell GPL License Option + +If you received this File from Marvell, you may opt to use, redistribute and/or +modify this File in accordance with the terms and conditions of the General +Public License Version 2, June 1991 (the "GPL License"), a copy of which is +available along with the File in the license.txt file or by writing to the Free +Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or +on the worldwide web at http://www.gnu.org/licenses/gpl.txt. + +THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED +WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY +DISCLAIMED. The GPL License provides additional details about this warranty +disclaimer. +*******************************************************************************/ +/******************************************************************************* +* mvOsCpuArchLib.c - Marvell CPU architecture library +* +* DESCRIPTION: +* This library introduce Marvell API for OS dependent CPU architecture +* APIs. This library introduce single CPU architecture services APKI +* cross OS. +* +* DEPENDENCIES: +* None. +* +*******************************************************************************/ + +/* includes */ +#include +#include "mvOs.h" + +static MV_U32 read_p15_c0 (void); + +/* defines */ +#define ARM_ID_REVISION_OFFS 0 +#define ARM_ID_REVISION_MASK (0xf << ARM_ID_REVISION_OFFS) + +#define ARM_ID_PART_NUM_OFFS 4 +#define ARM_ID_PART_NUM_MASK (0xfff << ARM_ID_PART_NUM_OFFS) + +#define ARM_ID_ARCH_OFFS 16 +#define ARM_ID_ARCH_MASK (0xf << ARM_ID_ARCH_OFFS) + +#define ARM_ID_VAR_OFFS 20 +#define ARM_ID_VAR_MASK (0xf << ARM_ID_VAR_OFFS) + +#define ARM_ID_ASCII_OFFS 24 +#define ARM_ID_ASCII_MASK (0xff << ARM_ID_ASCII_OFFS) + + + +void* mvOsIoCachedMalloc( void* osHandle, MV_U32 size, MV_ULONG* pPhyAddr, + MV_U32 *memHandle) +{ + void *p = kmalloc( size, GFP_KERNEL ); + *pPhyAddr = pci_map_single( osHandle, p, 0, PCI_DMA_BIDIRECTIONAL ); + return p; +} +void* mvOsIoUncachedMalloc( void* osHandle, MV_U32 size, MV_ULONG* pPhyAddr, + MV_U32 *memHandle) +{ + return pci_alloc_consistent( osHandle, size, (dma_addr_t *)pPhyAddr ); +} + +void mvOsIoUncachedFree( void* osHandle, MV_U32 size, MV_ULONG phyAddr, void* pVirtAddr, + MV_U32 memHandle) +{ + return pci_free_consistent( osHandle, size, pVirtAddr, (dma_addr_t)phyAddr ); +} + +void mvOsIoCachedFree( void* osHandle, MV_U32 size, MV_ULONG phyAddr, void* pVirtAddr, + MV_U32 memHandle ) +{ + return kfree( pVirtAddr ); +} + +int mvOsRand(void) +{ + int rand; + get_random_bytes(&rand, sizeof(rand) ); + return rand; +} + +/******************************************************************************* +* mvOsCpuVerGet() - +* +* DESCRIPTION: +* +* INPUT: +* None. +* +* OUTPUT: +* None. +* +* RETURN: +* 32bit CPU Revision +* +*******************************************************************************/ +MV_U32 mvOsCpuRevGet( MV_VOID ) +{ + return ((read_p15_c0() & ARM_ID_REVISION_MASK ) >> ARM_ID_REVISION_OFFS); +} +/******************************************************************************* +* mvOsCpuPartGet() - +* +* DESCRIPTION: +* +* INPUT: +* None. +* +* OUTPUT: +* None. +* +* RETURN: +* 32bit CPU Part number +* +*******************************************************************************/ +MV_U32 mvOsCpuPartGet( MV_VOID ) +{ + return ((read_p15_c0() & ARM_ID_PART_NUM_MASK ) >> ARM_ID_PART_NUM_OFFS); +} +/******************************************************************************* +* mvOsCpuArchGet() - +* +* DESCRIPTION: +* +* INPUT: +* None. +* +* OUTPUT: +* None. +* +* RETURN: +* 32bit CPU Architicture number +* +*******************************************************************************/ +MV_U32 mvOsCpuArchGet( MV_VOID ) +{ + return ((read_p15_c0() & ARM_ID_ARCH_MASK ) >> ARM_ID_ARCH_OFFS); +} +/******************************************************************************* +* mvOsCpuVarGet() - +* +* DESCRIPTION: +* +* INPUT: +* None. +* +* OUTPUT: +* None. +* +* RETURN: +* 32bit CPU Variant number +* +*******************************************************************************/ +MV_U32 mvOsCpuVarGet( MV_VOID ) +{ + return ((read_p15_c0() & ARM_ID_VAR_MASK ) >> ARM_ID_VAR_OFFS); +} +/******************************************************************************* +* mvOsCpuAsciiGet() - +* +* DESCRIPTION: +* +* INPUT: +* None. +* +* OUTPUT: +* None. +* +* RETURN: +* 32bit CPU Variant number +* +*******************************************************************************/ +MV_U32 mvOsCpuAsciiGet( MV_VOID ) +{ + return ((read_p15_c0() & ARM_ID_ASCII_MASK ) >> ARM_ID_ASCII_OFFS); +} + + + +/* +static unsigned long read_p15_c0 (void) +*/ +/* read co-processor 15, register #0 (ID register) */ +static MV_U32 read_p15_c0 (void) +{ + MV_U32 value; + + __asm__ __volatile__( + "mrc p15, 0, %0, c0, c0, 0 @ read control reg\n" + : "=r" (value) + : + : "memory"); + + return value; +} + diff --git a/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/linux_oss/mvOs.h b/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/linux_oss/mvOs.h new file mode 100644 index 0000000000..8da562a405 --- /dev/null +++ b/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/linux_oss/mvOs.h @@ -0,0 +1,423 @@ +/******************************************************************************* +Copyright (C) Marvell International Ltd. and its affiliates + +This software file (the "File") is owned and distributed by Marvell +International Ltd. and/or its affiliates ("Marvell") under the following +alternative licensing terms. Once you have made an election to distribute the +File under one of the following license alternatives, please (i) delete this +introductory statement regarding license alternatives, (ii) delete the two +license alternatives that you have not elected to use and (iii) preserve the +Marvell copyright notice above. + + +******************************************************************************** +Marvell GPL License Option + +If you received this File from Marvell, you may opt to use, redistribute and/or +modify this File in accordance with the terms and conditions of the General +Public License Version 2, June 1991 (the "GPL License"), a copy of which is +available along with the File in the license.txt file or by writing to the Free +Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or +on the worldwide web at http://www.gnu.org/licenses/gpl.txt. + +THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED +WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY +DISCLAIMED. The GPL License provides additional details about this warranty +disclaimer. +*******************************************************************************/ +#ifndef _MV_OS_LNX_H_ +#define _MV_OS_LNX_H_ + + +#ifdef __KERNEL__ +/* for kernel space */ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include + +#include + +#include "dbg-trace.h" + +extern void mv_early_printk(char *fmt,...); + +#define MV_ASM __asm__ __volatile__ +#define INLINE inline +#define MV_TRC_REC TRC_REC +#define mvOsPrintf printk +#define mvOsEarlyPrintf mv_early_printk +#define mvOsOutput printk +#define mvOsSPrintf sprintf +#define mvOsMalloc(_size_) kmalloc(_size_,GFP_ATOMIC) +#define mvOsFree kfree +#define mvOsMemcpy memcpy +#define mvOsSleep(_mils_) mdelay(_mils_) +#define mvOsTaskLock() +#define mvOsTaskUnlock() +#define strtol simple_strtoul +#define mvOsDelay(x) mdelay(x) +#define mvOsUDelay(x) udelay(x) +#define mvCopyFromOs copy_from_user +#define mvCopyToOs copy_to_user + + +#include "mvTypes.h" +#include "mvCommon.h" + +#ifdef MV_NDEBUG +#define mvOsAssert(cond) +#else +#define mvOsAssert(cond) { do { if(!(cond)) { BUG(); } }while(0); } +#endif /* MV_NDEBUG */ + +#else /* __KERNEL__ */ + +/* for user space applications */ +#include +#include +#include +#include + +#define INLINE inline +#define mvOsPrintf printf +#define mvOsOutput printf +#define mvOsMalloc(_size_) malloc(_size_) +#define mvOsFree free +#define mvOsAssert(cond) assert(cond) + +#endif /* __KERNEL__ */ +#define mvOsIoVirtToPhy(pDev, pVirtAddr) \ + pci_map_single( (pDev), (pVirtAddr), 0, PCI_DMA_BIDIRECTIONAL ) + +#define mvOsCacheClear(pDev, p, size ) \ + pci_map_single( (pDev), (p), (size), PCI_DMA_BIDIRECTIONAL) + +#define mvOsCacheFlush(pDev, p, size ) \ + pci_map_single( (pDev), (p), (size), PCI_DMA_TODEVICE) + +#define mvOsCacheInvalidate(pDev, p, size) \ + pci_map_single( (pDev), (p), (size), PCI_DMA_FROMDEVICE ) + +#define mvOsCacheUnmap(pDev, phys, size) \ + pci_unmap_single( (pDev), (dma_addr_t)(phys), (size), PCI_DMA_FROMDEVICE ) + + +#define CPU_PHY_MEM(x) (MV_U32)x +#define CPU_MEMIO_CACHED_ADDR(x) (void*)x +#define CPU_MEMIO_UNCACHED_ADDR(x) (void*)x + + +/* CPU architecture dependent 32, 16, 8 bit read/write IO addresses */ +#define MV_MEMIO32_WRITE(addr, data) \ + ((*((volatile unsigned int*)(addr))) = ((unsigned int)(data))) + +#define MV_MEMIO32_READ(addr) \ + ((*((volatile unsigned int*)(addr)))) + +#define MV_MEMIO16_WRITE(addr, data) \ + ((*((volatile unsigned short*)(addr))) = ((unsigned short)(data))) + +#define MV_MEMIO16_READ(addr) \ + ((*((volatile unsigned short*)(addr)))) + +#define MV_MEMIO8_WRITE(addr, data) \ + ((*((volatile unsigned char*)(addr))) = ((unsigned char)(data))) + +#define MV_MEMIO8_READ(addr) \ + ((*((volatile unsigned char*)(addr)))) + + +/* No Fast Swap implementation (in assembler) for ARM */ +#define MV_32BIT_LE_FAST(val) MV_32BIT_LE(val) +#define MV_16BIT_LE_FAST(val) MV_16BIT_LE(val) +#define MV_32BIT_BE_FAST(val) MV_32BIT_BE(val) +#define MV_16BIT_BE_FAST(val) MV_16BIT_BE(val) + +/* 32 and 16 bit read/write in big/little endian mode */ + +/* 16bit write in little endian mode */ +#define MV_MEMIO_LE16_WRITE(addr, data) \ + MV_MEMIO16_WRITE(addr, MV_16BIT_LE_FAST(data)) + +/* 16bit read in little endian mode */ +static __inline MV_U16 MV_MEMIO_LE16_READ(MV_U32 addr) +{ + MV_U16 data; + + data= (MV_U16)MV_MEMIO16_READ(addr); + + return (MV_U16)MV_16BIT_LE_FAST(data); +} + +/* 32bit write in little endian mode */ +#define MV_MEMIO_LE32_WRITE(addr, data) \ + MV_MEMIO32_WRITE(addr, MV_32BIT_LE_FAST(data)) + +/* 32bit read in little endian mode */ +static __inline MV_U32 MV_MEMIO_LE32_READ(MV_U32 addr) +{ + MV_U32 data; + + data= (MV_U32)MV_MEMIO32_READ(addr); + + return (MV_U32)MV_32BIT_LE_FAST(data); +} + +static __inline void mvOsBCopy(char* srcAddr, char* dstAddr, int byteCount) +{ + while(byteCount != 0) + { + *dstAddr = *srcAddr; + dstAddr++; + srcAddr++; + byteCount--; + } +} + +static INLINE MV_U64 mvOsDivMod64(MV_U64 divided, MV_U64 divisor, MV_U64* modulu) +{ + MV_U64 division = 0; + + if(divisor == 1) + return divided; + + while(divided >= divisor) + { + division++; + divided -= divisor; + } + if (modulu != NULL) + *modulu = divided; + + return division; +} + +#if defined(MV_BRIDGE_SYNC_REORDER) +extern MV_U32 *mvUncachedParam; + +static __inline void mvOsBridgeReorderWA(void) +{ + volatile MV_U32 val = 0; + + val = mvUncachedParam[0]; +} +#endif + + +/* Flash APIs */ +#define MV_FL_8_READ MV_MEMIO8_READ +#define MV_FL_16_READ MV_MEMIO_LE16_READ +#define MV_FL_32_READ MV_MEMIO_LE32_READ +#define MV_FL_8_DATA_READ MV_MEMIO8_READ +#define MV_FL_16_DATA_READ MV_MEMIO16_READ +#define MV_FL_32_DATA_READ MV_MEMIO32_READ +#define MV_FL_8_WRITE MV_MEMIO8_WRITE +#define MV_FL_16_WRITE MV_MEMIO_LE16_WRITE +#define MV_FL_32_WRITE MV_MEMIO_LE32_WRITE +#define MV_FL_8_DATA_WRITE MV_MEMIO8_WRITE +#define MV_FL_16_DATA_WRITE MV_MEMIO16_WRITE +#define MV_FL_32_DATA_WRITE MV_MEMIO32_WRITE + + +/* CPU cache information */ +#define CPU_I_CACHE_LINE_SIZE 32 /* 2do: replace 32 with linux core macro */ +#define CPU_D_CACHE_LINE_SIZE 32 /* 2do: replace 32 with linux core macro */ + +#ifdef CONFIG_L2_CACHE_ENABLE +/* Data cache flush one line */ +#define mvOsCacheLineFlushInv(handle, addr) \ +{ \ + __asm__ __volatile__ ("mcr p15, 0, %0, c7, c14, 1" : : "r" (addr));\ + __asm__ __volatile__ ("mcr p15, 1, %0, c15, c10, 1" : : "r" (addr));\ + __asm__ __volatile__ ("mcr p15, 0, r0, c7, c10, 4"); \ +} + +#else + +/* Data cache flush one line */ +#define mvOsCacheLineFlushInv(handle, addr) \ +{ \ + __asm__ __volatile__ ("mcr p15, 0, %0, c7, c14, 1" : : "r" (addr));\ + __asm__ __volatile__ ("mcr p15, 0, %0, c7, c10, 4" : : "r" (addr)); \ +} +#endif + +#ifdef CONFIG_L2_CACHE_ENABLE +#define mvOsCacheLineInv(handle,addr) \ +{ \ + __asm__ __volatile__ ("mcr p15, 0, %0, c7, c6, 1" : : "r" (addr)); \ + __asm__ __volatile__ ("mcr p15, 1, %0, c15, c11, 1" : : "r" (addr)); \ +} +#else +#define mvOsCacheLineInv(handle,addr) \ +{ \ + __asm__ __volatile__ ("mcr p15, 0, %0, c7, c6, 1" : : "r" (addr)); \ +} +#endif + +#ifdef CONFIG_L2_CACHE_ENABLE +/* Data cache flush one line */ +#define mvOsCacheLineFlush(handle, addr) \ +{ \ + __asm__ __volatile__ ("mcr p15, 0, %0, c7, c10, 1" : : "r" (addr));\ + __asm__ __volatile__ ("mcr p15, 1, %0, c15, c9, 1" : : "r" (addr));\ + __asm__ __volatile__ ("mcr p15, 0, r0, c7, c10, 4"); \ +} + +#else +/* Data cache flush one line */ +#define mvOsCacheLineFlush(handle, addr) \ +{ \ + __asm__ __volatile__ ("mcr p15, 0, %0, c7, c10, 1" : : "r" (addr));\ + __asm__ __volatile__ ("mcr p15, 0, %0, c7, c10, 4" : : "r" (addr)); \ +} +#endif + +static __inline void mvOsPrefetch(const void *ptr) +{ +#ifdef CONFIG_USE_DSP + __asm__ __volatile__( + "pld\t%0" + : + : "o" (*(char *)ptr) + : "cc"); +#else + return; +#endif +} + + +/* Flush CPU pipe */ +#define CPU_PIPE_FLUSH + + + + + +/* register manipulations */ + +/****************************************************************************** +* This debug function enable the write of each register that u-boot access to +* to an array in the DRAM, the function record only MV_REG_WRITE access. +* The function could not be operate when booting from flash. +* In order to print the array we use the printreg command. +******************************************************************************/ +/* #define REG_DEBUG */ +#if defined(REG_DEBUG) +extern int reg_arry[2048][2]; +extern int reg_arry_index; +#endif + +/* Marvell controller register read/write macros */ +#define MV_REG_VALUE(offset) \ + (MV_MEMIO32_READ((INTER_REGS_BASE | (offset)))) + +#define MV_REG_READ(offset) \ + (MV_MEMIO_LE32_READ(INTER_REGS_BASE | (offset))) + +#if defined(REG_DEBUG) +#define MV_REG_WRITE(offset, val) \ + MV_MEMIO_LE32_WRITE((INTER_REGS_BASE | (offset)), (val)); \ + { \ + reg_arry[reg_arry_index][0] = (INTER_REGS_BASE | (offset));\ + reg_arry[reg_arry_index][1] = (val);\ + reg_arry_index++;\ + } +#else +#define MV_REG_WRITE(offset, val) \ + MV_MEMIO_LE32_WRITE((INTER_REGS_BASE | (offset)), (val)); +#endif + +#define MV_REG_BYTE_READ(offset) \ + (MV_MEMIO8_READ((INTER_REGS_BASE | (offset)))) + +#if defined(REG_DEBUG) +#define MV_REG_BYTE_WRITE(offset, val) \ + MV_MEMIO8_WRITE((INTER_REGS_BASE | (offset)), (val)); \ + { \ + reg_arry[reg_arry_index][0] = (INTER_REGS_BASE | (offset));\ + reg_arry[reg_arry_index][1] = (val);\ + reg_arry_index++;\ + } +#else +#define MV_REG_BYTE_WRITE(offset, val) \ + MV_MEMIO8_WRITE((INTER_REGS_BASE | (offset)), (val)) +#endif + +#if defined(REG_DEBUG) +#define MV_REG_BIT_SET(offset, bitMask) \ + (MV_MEMIO32_WRITE((INTER_REGS_BASE | (offset)), \ + (MV_MEMIO32_READ(INTER_REGS_BASE | (offset)) | \ + MV_32BIT_LE_FAST(bitMask)))); \ + { \ + reg_arry[reg_arry_index][0] = (INTER_REGS_BASE | (offset));\ + reg_arry[reg_arry_index][1] = (MV_MEMIO32_READ(INTER_REGS_BASE | (offset)));\ + reg_arry_index++;\ + } +#else +#define MV_REG_BIT_SET(offset, bitMask) \ + (MV_MEMIO32_WRITE((INTER_REGS_BASE | (offset)), \ + (MV_MEMIO32_READ(INTER_REGS_BASE | (offset)) | \ + MV_32BIT_LE_FAST(bitMask)))) +#endif + +#if defined(REG_DEBUG) +#define MV_REG_BIT_RESET(offset,bitMask) \ + (MV_MEMIO32_WRITE((INTER_REGS_BASE | (offset)), \ + (MV_MEMIO32_READ(INTER_REGS_BASE | (offset)) & \ + MV_32BIT_LE_FAST(~bitMask)))); \ + { \ + reg_arry[reg_arry_index][0] = (INTER_REGS_BASE | (offset));\ + reg_arry[reg_arry_index][1] = (MV_MEMIO32_READ(INTER_REGS_BASE | (offset)));\ + reg_arry_index++;\ + } +#else +#define MV_REG_BIT_RESET(offset,bitMask) \ + (MV_MEMIO32_WRITE((INTER_REGS_BASE | (offset)), \ + (MV_MEMIO32_READ(INTER_REGS_BASE | (offset)) & \ + MV_32BIT_LE_FAST(~bitMask)))) +#endif + + + +/* ARM architecture APIs */ +MV_U32 mvOsCpuRevGet (MV_VOID); +MV_U32 mvOsCpuPartGet (MV_VOID); +MV_U32 mvOsCpuArchGet (MV_VOID); +MV_U32 mvOsCpuVarGet (MV_VOID); +MV_U32 mvOsCpuAsciiGet (MV_VOID); + +/* Other APIs */ +void* mvOsIoCachedMalloc( void* osHandle, MV_U32 size, MV_ULONG* pPhyAddr, MV_U32 *memHandle); +void* mvOsIoUncachedMalloc( void* osHandle, MV_U32 size, MV_ULONG* pPhyAddr, MV_U32 *memHandle ); +void mvOsIoUncachedFree( void* osHandle, MV_U32 size, MV_ULONG phyAddr, void* pVirtAddr, MV_U32 memHandle ); +void mvOsIoCachedFree( void* osHandle, MV_U32 size, MV_ULONG phyAddr, void* pVirtAddr, MV_U32 memHandle ); +int mvOsRand(void); + +#endif /* _MV_OS_LNX_H_ */ + + diff --git a/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/linux_oss/mvOsSata.h b/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/linux_oss/mvOsSata.h new file mode 100644 index 0000000000..c925a9e9a0 --- /dev/null +++ b/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/linux_oss/mvOsSata.h @@ -0,0 +1,158 @@ +/******************************************************************************* +Copyright (C) Marvell International Ltd. and its affiliates + +This software file (the "File") is owned and distributed by Marvell +International Ltd. and/or its affiliates ("Marvell") under the following +alternative licensing terms. Once you have made an election to distribute the +File under one of the following license alternatives, please (i) delete this +introductory statement regarding license alternatives, (ii) delete the two +license alternatives that you have not elected to use and (iii) preserve the +Marvell copyright notice above. + + +******************************************************************************** +Marvell GPL License Option + +If you received this File from Marvell, you may opt to use, redistribute and/or +modify this File in accordance with the terms and conditions of the General +Public License Version 2, June 1991 (the "GPL License"), a copy of which is +available along with the File in the license.txt file or by writing to the Free +Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or +on the worldwide web at http://www.gnu.org/licenses/gpl.txt. + +THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED +WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY +DISCLAIMED. The GPL License provides additional details about this warranty +disclaimer. +*******************************************************************************/ +/******************************************************************************* +* mvOsLinux.h - O.S. interface header file for Linux +* +* DESCRIPTION: +* This header file contains OS dependent definition under Linux +* +* DEPENDENCIES: +* Linux kernel header files. +* +* FILE REVISION NUMBER: +* $Revision: 1.1 $ +*******************************************************************************/ + +#ifndef __INCmvOsLinuxh +#define __INCmvOsLinuxh + +/* Includes */ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include "mvOs.h" + + +/* Definitions */ +#define MV_DEFAULT_QUEUE_DEPTH 2 +#define MV_SATA_SUPPORT_EDMA_SINGLE_DATA_REGION +#define MV_SATA_SUPPORT_GEN2E_128_QUEUE_LEN + +#ifdef CONFIG_MV88F6082 + #define MV_SATA_OVERRIDE_SW_QUEUE_SIZE + #define MV_SATA_REQUESTED_SW_QUEUE_SIZE 2 + #undef MV_SATA_SUPPORT_GEN2E_128_QUEUE_LEN +#endif + +/* System dependent macro for flushing CPU write cache */ +#if defined (MV_BRIDGE_SYNC_REORDER) +#define MV_CPU_WRITE_BUFFER_FLUSH() do { \ + wmb(); \ + mvOsBridgeReorderWA(); \ + } while (0) +#else +#define MV_CPU_WRITE_BUFFER_FLUSH() wmb() +#endif /* CONFIG_MV78XX0 */ + +/* System dependent little endian from / to CPU conversions */ +#define MV_CPU_TO_LE16(x) cpu_to_le16(x) +#define MV_CPU_TO_LE32(x) cpu_to_le32(x) + +#define MV_LE16_TO_CPU(x) le16_to_cpu(x) +#define MV_LE32_TO_CPU(x) le32_to_cpu(x) + +#ifdef __BIG_ENDIAN_BITFIELD +#define MV_BIG_ENDIAN_BITFIELD +#endif + +/* System dependent register read / write in byte/word/dword variants */ +#define MV_REG_WRITE_BYTE(base, offset, val) writeb(val, base + offset) +#define MV_REG_WRITE_WORD(base, offset, val) writew(val, base + offset) +#define MV_REG_WRITE_DWORD(base, offset, val) writel(val, base + offset) +#define MV_REG_READ_BYTE(base, offset) readb(base + offset) +#define MV_REG_READ_WORD(base, offset) readw(base + offset) +#define MV_REG_READ_DWORD(base, offset) readl(base + offset) + + +/* Typedefs */ + +/* System dependant typedefs */ +typedef void *MV_VOID_PTR; +typedef u32 *MV_U32_PTR; +typedef u16 *MV_U16_PTR; +typedef u8 *MV_U8_PTR; +typedef char *MV_CHAR_PTR; +typedef void *MV_BUS_ADDR_T; +typedef unsigned long MV_CPU_FLAGS; + + +/* Structures */ +/* System dependent structure */ +typedef struct mvOsSemaphore +{ + int notUsed; +} MV_OS_SEMAPHORE; + + +/* Functions (User implemented)*/ + +/* Semaphore init, take and release */ +#define mvOsSemInit(x) MV_TRUE +#define mvOsSemTake(x) +#define mvOsSemRelease(x) + +/* Interrupt masking and unmasking functions */ +MV_CPU_FLAGS mvOsSaveFlagsAndMaskCPUInterrupts(MV_VOID); +MV_VOID mvOsRestoreFlags(MV_CPU_FLAGS); + +/* Delay function in micro seconds resolution */ +void mvMicroSecondsDelay(MV_VOID_PTR, MV_U32); + +/* Typedefs */ +typedef enum mvBoolean +{ + MV_SFALSE, MV_STRUE +} MV_BOOLEAN; + +/* System logging function */ +#include "mvLog.h" +/* Enable READ/WRITE Long SCSI command only when driver is compiled for debugging */ +#ifdef MV_LOGGER +#define MV_SATA_SUPPORT_READ_WRITE_LONG +#endif + +#define MV_IAL_LOG_ID 3 + +#endif /* __INCmvOsLinuxh */ diff --git a/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/mvSysHwConfig.h b/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/mvSysHwConfig.h new file mode 100644 index 0000000000..d761060c94 --- /dev/null +++ b/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/mvSysHwConfig.h @@ -0,0 +1,375 @@ +/******************************************************************************* +Copyright (C) Marvell International Ltd. and its affiliates + +******************************************************************************** +Marvell GPL License Option + +If you received this File from Marvell, you may opt to use, redistribute and/or +modify this File in accordance with the terms and conditions of the General +Public License Version 2, June 1991 (the "GPL License"), a copy of which is +available along with the File in the license.txt file or by writing to the Free +Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or +on the worldwide web at http://www.gnu.org/licenses/gpl.txt. + +THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED +WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY +DISCLAIMED. The GPL License provides additional details about this warranty +disclaimer. + +*******************************************************************************/ +/******************************************************************************* +* mvSysHwCfg.h - Marvell system HW configuration file +* +* DESCRIPTION: +* None. +* +* DEPENDENCIES: +* None. +* +*******************************************************************************/ + +#ifndef __INCmvSysHwConfigh +#define __INCmvSysHwConfigh + +#include "../../../../include/linux/autoconf.h" + +#define CONFIG_MARVELL 1 + +/* includes */ +#define _1K 0x00000400 +#define _4K 0x00001000 +#define _8K 0x00002000 +#define _16K 0x00004000 +#define _32K 0x00008000 +#define _64K 0x00010000 +#define _128K 0x00020000 +#define _256K 0x00040000 +#define _512K 0x00080000 + +#define _1M 0x00100000 +#define _2M 0x00200000 +#define _4M 0x00400000 +#define _8M 0x00800000 +#define _16M 0x01000000 +#define _32M 0x02000000 +#define _64M 0x04000000 +#define _128M 0x08000000 +#define _256M 0x10000000 +#define _512M 0x20000000 + +#define _1G 0x40000000 +#define _2G 0x80000000 + +/****************************************/ +/* Soc supporeted Units definitions */ +/****************************************/ + +#ifdef CONFIG_MV_INCLUDE_PEX +#define MV_INCLUDE_PEX +#endif +#ifdef CONFIG_MV_INCLUDE_TWSI +#define MV_INCLUDE_TWSI +#endif +#ifdef CONFIG_MV_INCLUDE_CESA +#define MV_INCLUDE_CESA +#endif +#ifdef CONFIG_MV_INCLUDE_GIG_ETH +#define MV_INCLUDE_GIG_ETH +#endif +#ifdef CONFIG_MV_INCLUDE_INTEG_SATA +#define MV_INCLUDE_INTEG_SATA +#define MV_INCLUDE_SATA +#endif +#ifdef CONFIG_MV_INCLUDE_USB +#define MV_INCLUDE_USB +#define MV_USB_VOLTAGE_FIX +#endif +#ifdef CONFIG_MV_INCLUDE_NAND +#define MV_INCLUDE_NAND +#endif +#ifdef CONFIG_MV_INCLUDE_TDM +#define MV_INCLUDE_TDM +#endif +#ifdef CONFIG_MV_INCLUDE_XOR +#define MV_INCLUDE_XOR +#endif +#ifdef CONFIG_MV_INCLUDE_TWSI +#define MV_INCLUDE_TWSI +#endif +#ifdef CONFIG_MV_INCLUDE_UART +#define MV_INCLUDE_UART +#endif +#ifdef CONFIG_MV_INCLUDE_SPI +#define MV_INCLUDE_SPI +#endif +#ifdef CONFIG_MV_INCLUDE_SFLASH_MTD +#define MV_INCLUDE_SFLASH_MTD +#endif +#ifdef CONFIG_MV_INCLUDE_AUDIO +#define MV_INCLUDE_AUDIO +#endif +#ifdef CONFIG_MV_INCLUDE_TS +#define MV_INCLUDE_TS +#endif +#ifdef CONFIG_MV_INCLUDE_SDIO +#define MV_INCLUDE_SDIO +#endif + + +/* NAND flash stuff */ +#ifdef CONFIG_MV_NAND_BOOT +#define MV_NAND_BOOT +#endif +#ifdef CONFIG_MV_NAND +#define MV_NAND +#endif + +/* SPI flash stuff */ +#ifdef CONFIG_MV_SPI_BOOT +#define MV_SPI_BOOT +#endif + + +/****************************************************************/ +/************* General configuration ********************/ +/****************************************************************/ + +/* Enable Clock Power Control */ +#define MV_INCLUDE_CLK_PWR_CNTRL + +/* Disable the DEVICE BAR in the PEX */ +#define MV_DISABLE_PEX_DEVICE_BAR + +/* Allow the usage of early printings during initialization */ +#define MV_INCLUDE_EARLY_PRINTK + +/****************************************************************/ +/************* NFP configuration ********************************/ +/****************************************************************/ +#define MV_NFP_SEC_Q_SIZE 64 +#define MV_NFP_SEC_REQ_Q_SIZE 1000 + + + +/****************************************************************/ +/************* CESA configuration ********************/ +/****************************************************************/ + +#ifdef MV_INCLUDE_CESA + +#define MV_CESA_MAX_CHAN 4 + +/* Use 2K of SRAM */ +#define MV_CESA_MAX_BUF_SIZE 1600 + +#endif /* MV_INCLUDE_CESA */ + +#if defined(CONFIG_MV_INCLUDE_GIG_ETH) + +#ifdef CONFIG_MV_NFP_STATS +#define MV_FP_STATISTICS +#else +#undef MV_FP_STATISTICS +#endif +/* Default configuration for SKB_REUSE: 0 - Disabled, 1 - Enabled */ +#define MV_ETH_SKB_REUSE_DEFAULT 1 +/* Default configuration for TX_EN workaround: 0 - Disabled, 1 - Enabled */ +#define MV_ETH_TX_EN_DEFAULT 0 + +/* un-comment if you want to perform tx_done from within the poll function */ +/* #define ETH_TX_DONE_ISR */ + +/* put descriptors in uncached memory */ +/* #define ETH_DESCR_UNCACHED */ + +/* Descriptors location: DRAM/internal-SRAM */ +#define ETH_DESCR_IN_SDRAM +#undef ETH_DESCR_IN_SRAM /* No integrated SRAM in 88Fxx81 devices */ + +#if defined(ETH_DESCR_IN_SRAM) +#if defined(ETH_DESCR_UNCACHED) + #define ETH_DESCR_CONFIG_STR "Uncached descriptors in integrated SRAM" +#else + #define ETH_DESCR_CONFIG_STR "Cached descriptors in integrated SRAM" +#endif +#elif defined(ETH_DESCR_IN_SDRAM) +#if defined(ETH_DESCR_UNCACHED) + #define ETH_DESCR_CONFIG_STR "Uncached descriptors in DRAM" +#else + #define ETH_DESCR_CONFIG_STR "Cached descriptors in DRAM" +#endif +#else + #error "Ethernet descriptors location undefined" +#endif /* ETH_DESCR_IN_SRAM or ETH_DESCR_IN_SDRAM*/ + +/* SW Sync-Barrier: not relevant for 88fxx81*/ +/* Reasnable to define this macro when descriptors in SRAM and buffers in DRAM */ +/* In RX the CPU theoretically might see himself as the descriptor owner, */ +/* although the buffer hadn't been written to DRAM yet. Performance cost. */ +/* #define INCLUDE_SYNC_BARR */ + +/* Buffers cache coherency method (buffers in DRAM) */ +#ifndef MV_CACHE_COHER_SW +/* Taken from mvCommon.h */ +/* Memory uncached, HW or SW cache coherency is not needed */ +#define MV_UNCACHED 0 +/* Memory cached, HW cache coherency supported in WriteThrough mode */ +#define MV_CACHE_COHER_HW_WT 1 +/* Memory cached, HW cache coherency supported in WriteBack mode */ +#define MV_CACHE_COHER_HW_WB 2 +/* Memory cached, No HW cache coherency, Cache coherency must be in SW */ +#define MV_CACHE_COHER_SW 3 + +#endif + +/* DRAM cache coherency configuration */ +#define MV_CACHE_COHERENCY MV_CACHE_COHER_SW + + +#define ETHER_DRAM_COHER MV_CACHE_COHER_SW /* No HW coherency in 88Fxx81 devices */ + +#if (ETHER_DRAM_COHER == MV_CACHE_COHER_HW_WB) + #define ETH_SDRAM_CONFIG_STR "DRAM HW cache coherency (write-back)" +#elif (ETHER_DRAM_COHER == MV_CACHE_COHER_HW_WT) + #define ETH_SDRAM_CONFIG_STR "DRAM HW cache coherency (write-through)" +#elif (ETHER_DRAM_COHER == MV_CACHE_COHER_SW) + #define ETH_SDRAM_CONFIG_STR "DRAM SW cache-coherency" +#elif (ETHER_DRAM_COHER == MV_UNCACHED) +# define ETH_SDRAM_CONFIG_STR "DRAM uncached" +#else + #error "Ethernet-DRAM undefined" +#endif /* ETHER_DRAM_COHER */ + + +/****************************************************************/ +/************* Ethernet driver configuration ********************/ +/****************************************************************/ + +/* port's default queueus */ +#define ETH_DEF_TXQ 0 +#define ETH_DEF_RXQ 0 + +#define MV_ETH_RX_Q_NUM CONFIG_MV_ETH_RX_Q_NUM +#define MV_ETH_TX_Q_NUM CONFIG_MV_ETH_TX_Q_NUM + +/* interrupt coalescing setting */ +#define ETH_TX_COAL 200 +#define ETH_RX_COAL 200 + +/* Checksum offloading */ +#define TX_CSUM_OFFLOAD +#define RX_CSUM_OFFLOAD + +#endif /* CONFIG_MV_INCLUDE_GIG_ETH */ + +/****************************************************************/ +/*************** Telephony configuration ************************/ +/****************************************************************/ +#if defined(CONFIG_MV_TDM_LINEAR_MODE) + #define MV_TDM_LINEAR_MODE +#elif defined(CONFIG_MV_TDM_ULAW_MODE) + #define MV_TDM_ULAW_MODE +#endif + +#if defined(CONFIG_MV_TDM_5CHANNELS) + #define MV_TDM_5CHANNELS +#endif + +#if defined(CONFIG_MV_TDM_USE_EXTERNAL_PCLK_SOURCE) + #define MV_TDM_USE_EXTERNAL_PCLK_SOURCE +#endif + +/* We use the following registers to store DRAM interface pre configuration */ +/* auto-detection results */ +/* IMPORTANT: We are using mask register for that purpose. Before writing */ +/* to units mask register, make sure main maks register is set to disable */ +/* all interrupts. */ +#define DRAM_BUF_REG0 0x30810 /* sdram bank 0 size */ +#define DRAM_BUF_REG1 0x30820 /* sdram config */ +#define DRAM_BUF_REG2 0x30830 /* sdram mode */ +#define DRAM_BUF_REG3 0x308c4 /* dunit control low */ +#define DRAM_BUF_REG4 0x60a90 /* sdram address control */ +#define DRAM_BUF_REG5 0x60a94 /* sdram timing control low */ +#define DRAM_BUF_REG6 0x60a98 /* sdram timing control high */ +#define DRAM_BUF_REG7 0x60a9c /* sdram ODT control low */ +#define DRAM_BUF_REG8 0x60b90 /* sdram ODT control high */ +#define DRAM_BUF_REG9 0x60b94 /* sdram Dunit ODT control */ +#define DRAM_BUF_REG10 0x60b98 /* sdram Extended Mode */ +#define DRAM_BUF_REG11 0x60b9c /* sdram Ddr2 Time Low Reg */ +#define DRAM_BUF_REG12 0x60a00 /* sdram Ddr2 Time High Reg */ +#define DRAM_BUF_REG13 0x60a04 /* dunit Ctrl High */ +#define DRAM_BUF_REG14 0x60b00 /* sdram second DIMM exist */ + +/* Following the pre-configuration registers default values restored after */ +/* auto-detection is done */ +#define DRAM_BUF_REG_DV 0 + +/* System Mapping */ +#define SDRAM_CS0_BASE 0x00000000 +#define SDRAM_CS0_SIZE _256M + +#define SDRAM_CS1_BASE 0x10000000 +#define SDRAM_CS1_SIZE _256M + +#define SDRAM_CS2_BASE 0x20000000 +#define SDRAM_CS2_SIZE _256M + +#define SDRAM_CS3_BASE 0x30000000 +#define SDRAM_CS3_SIZE _256M + +/* PEX */ +#define PEX0_MEM_BASE 0xe8000000 +#define PEX0_MEM_SIZE _128M + +#define PEX0_IO_BASE 0xf2000000 +#define PEX0_IO_SIZE _1M + +/* Device Chip Selects */ +#define NFLASH_CS_BASE 0xfa000000 +#define NFLASH_CS_SIZE _2M + +#define SPI_CS_BASE 0xf4000000 +#define SPI_CS_SIZE _16M + +#define CRYPT_ENG_BASE 0xf0000000 +#define CRYPT_ENG_SIZE _2M + +#define BOOTDEV_CS_BASE 0xff800000 +#define BOOTDEV_CS_SIZE _8M + +/* CS2 - BOOTROM */ +#define DEVICE_CS2_BASE 0xff900000 +#define DEVICE_CS2_SIZE _1M + +/* PEX Work arround */ +/* the target we will use for the workarround */ +#define PEX_CONFIG_RW_WA_TARGET PEX0_MEM +/*a flag that indicates if we are going to use the +size and base of the target we using for the workarround +window */ +#define PEX_CONFIG_RW_WA_USE_ORIGINAL_WIN_VALUES 1 +/* if the above flag is 0 then the following values +will be used for the workarround window base and size, +otherwise the following defines will be ignored */ +#define PEX_CONFIG_RW_WA_BASE 0xF3000000 +#define PEX_CONFIG_RW_WA_SIZE _16M + +/* Internal registers: size is defined in Controllerenvironment */ +#define INTER_REGS_BASE 0xFEE00000 + +/* DRAM detection stuff */ +#define MV_DRAM_AUTO_SIZE + +/* Board clock detection */ +#define TCLK_AUTO_DETECT /* Use Tclk auto detection */ +#define SYSCLK_AUTO_DETECT /* Use SysClk auto detection */ +#define PCLCK_AUTO_DETECT /* Use PClk auto detection */ +#define L2CLK_AUTO_DETECT /* Use L2Clk auto detection */ + +/* PEX-PCI\PCI-PCI Bridge*/ +#define PCI0_IF_PTP 0 /* Bridge exist on pciIf0*/ + + + +#endif /* __INCmvSysHwConfigh */ + diff --git a/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/mv_hal/cntmr/mvCntmr.c b/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/mv_hal/cntmr/mvCntmr.c new file mode 100644 index 0000000000..717c1507cf --- /dev/null +++ b/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/mv_hal/cntmr/mvCntmr.c @@ -0,0 +1,376 @@ +/******************************************************************************* +Copyright (C) Marvell International Ltd. and its affiliates + +This software file (the "File") is owned and distributed by Marvell +International Ltd. and/or its affiliates ("Marvell") under the following +alternative licensing terms. Once you have made an election to distribute the +File under one of the following license alternatives, please (i) delete this +introductory statement regarding license alternatives, (ii) delete the two +license alternatives that you have not elected to use and (iii) preserve the +Marvell copyright notice above. + +******************************************************************************** +Marvell Commercial License Option + +If you received this File from Marvell and you have entered into a commercial +license agreement (a "Commercial License") with Marvell, the File is licensed +to you under the terms of the applicable Commercial License. + +******************************************************************************** +Marvell GPL License Option + +If you received this File from Marvell, you may opt to use, redistribute and/or +modify this File in accordance with the terms and conditions of the General +Public License Version 2, June 1991 (the "GPL License"), a copy of which is +available along with the File in the license.txt file or by writing to the Free +Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or +on the worldwide web at http://www.gnu.org/licenses/gpl.txt. + +THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED +WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY +DISCLAIMED. The GPL License provides additional details about this warranty +disclaimer. +******************************************************************************** +Marvell BSD License Option + +If you received this File from Marvell, you may opt to use, redistribute and/or +modify this File under the following licensing terms. +Redistribution and use in source and binary forms, with or without modification, +are permitted provided that the following conditions are met: + + * Redistributions of source code must retain the above copyright notice, + this list of conditions and the following disclaimer. + + * Redistributions in binary form must reproduce the above copyright + notice, this list of conditions and the following disclaimer in the + documentation and/or other materials provided with the distribution. + + * Neither the name of Marvell nor the names of its contributors may be + used to endorse or promote products derived from this software without + specific prior written permission. + +THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND +ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED +WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE +DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR +ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES +(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; +LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON +ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS +SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + +*******************************************************************************/ + +#include "mvCntmr.h" +#include "cpu/mvCpu.h" + +/* defines */ +#ifdef MV_DEBUG + #define DB(x) x +#else + #define DB(x) +#endif + +extern unsigned int whoAmI(void); + +/******************************************************************************* +* mvCntmrLoad - +* +* DESCRIPTION: +* Load an init Value to a given counter/timer +* +* INPUT: +* countNum - counter number +* value - value to be loaded +* +* OUTPUT: +* None. +* +* RETURN: +* MV_BAD_PARAM on bad parameters , MV_ERROR on error ,MV_OK on sucess +*******************************************************************************/ +MV_STATUS mvCntmrLoad(MV_U32 countNum, MV_U32 value) +{ + if (countNum >= MV_CNTMR_MAX_COUNTER ) + { + + mvOsPrintf(("mvCntmrLoad: Err. Illigal counter number \n")); + return MV_BAD_PARAM;; + + } + + MV_REG_WRITE(CNTMR_RELOAD_REG(countNum),value); + MV_REG_WRITE(CNTMR_VAL_REG(countNum),value); + + return MV_OK; +} + +/******************************************************************************* +* mvCntmrRead - +* +* DESCRIPTION: +* Returns the value of the given Counter/Timer +* +* INPUT: +* countNum - counter number +* +* OUTPUT: +* None. +* +* RETURN: +* MV_U32 counter value +*******************************************************************************/ +MV_U32 mvCntmrRead(MV_U32 countNum) +{ + return MV_REG_READ(CNTMR_VAL_REG(countNum)); +} + +/******************************************************************************* +* mvCntmrWrite - +* +* DESCRIPTION: +* Returns the value of the given Counter/Timer +* +* INPUT: +* countNum - counter number +* countVal - value to write +* +* OUTPUT: +* None. +* +* RETURN: +* None +*******************************************************************************/ +void mvCntmrWrite(MV_U32 countNum,MV_U32 countVal) +{ + MV_REG_WRITE(CNTMR_VAL_REG(countNum),countVal); +} + +/******************************************************************************* +* mvCntmrCtrlSet - +* +* DESCRIPTION: +* Set the Control to a given counter/timer +* +* INPUT: +* countNum - counter number +* pCtrl - pointer to MV_CNTMR_CTRL structure +* +* OUTPUT: +* None. +* +* RETURN: +* MV_BAD_PARAM on bad parameters , MV_ERROR on error ,MV_OK on sucess +*******************************************************************************/ +MV_STATUS mvCntmrCtrlSet(MV_U32 countNum, MV_CNTMR_CTRL *pCtrl) +{ + MV_U32 cntmrCtrl; + + if (countNum >= MV_CNTMR_MAX_COUNTER ) + { + + DB(mvOsPrintf(("mvCntmrCtrlSet: Err. Illigal counter number \n"))); + return MV_BAD_PARAM;; + + } + + /* read control register */ + cntmrCtrl = MV_REG_READ(CNTMR_CTRL_REG); + + + if (pCtrl->enable) /* enable counter\timer */ + { + cntmrCtrl |= CTCR_ARM_TIMER_EN(countNum); + } + else /* disable counter\timer */ + { + cntmrCtrl &= ~CTCR_ARM_TIMER_EN(countNum); + } + + if ( pCtrl->autoEnable ) /* Auto mode */ + { + cntmrCtrl |= CTCR_ARM_TIMER_AUTO_EN(countNum); + + } + else /* no auto mode */ + { + cntmrCtrl &= ~CTCR_ARM_TIMER_AUTO_EN(countNum); + } + + MV_REG_WRITE(CNTMR_CTRL_REG,cntmrCtrl); + + return MV_OK; + +} + +/******************************************************************************* +* mvCntmrCtrlGet - +* +* DESCRIPTION: +* Get the Control value of a given counter/timer +* +* INPUT: +* countNum - counter number +* pCtrl - pointer to MV_CNTMR_CTRL structure +* +* OUTPUT: +* Counter\Timer control value +* +* RETURN: +* MV_BAD_PARAM on bad parameters , MV_ERROR on error ,MV_OK on sucess +*******************************************************************************/ +MV_STATUS mvCntmrCtrlGet(MV_U32 countNum, MV_CNTMR_CTRL *pCtrl) +{ + MV_U32 cntmrCtrl; + + if (countNum >= MV_CNTMR_MAX_COUNTER ) + { + DB(mvOsPrintf(("mvCntmrCtrlGet: Err. Illigal counter number \n"))); + return MV_BAD_PARAM;; + } + + /* read control register */ + cntmrCtrl = MV_REG_READ(CNTMR_CTRL_REG); + + /* enable counter\timer */ + if (cntmrCtrl & CTCR_ARM_TIMER_EN(countNum)) + { + pCtrl->enable = MV_TRUE; + } + else + { + pCtrl->enable = MV_FALSE; + } + + /* counter mode */ + if (cntmrCtrl & CTCR_ARM_TIMER_AUTO_EN(countNum)) + { + pCtrl->autoEnable = MV_TRUE; + } + else + { + pCtrl->autoEnable = MV_FALSE; + } + + return MV_OK; +} + +/******************************************************************************* +* mvCntmrEnable - +* +* DESCRIPTION: +* Set the Enable-Bit to logic '1' ==> starting the counter +* +* INPUT: +* countNum - counter number +* +* OUTPUT: +* None. +* +* RETURN: +* MV_BAD_PARAM on bad parameters , MV_ERROR on error ,MV_OK on sucess +*******************************************************************************/ +MV_STATUS mvCntmrEnable(MV_U32 countNum) +{ + MV_U32 cntmrCtrl; + + if (countNum >= MV_CNTMR_MAX_COUNTER ) + { + + DB(mvOsPrintf(("mvCntmrEnable: Err. Illigal counter number \n"))); + return MV_BAD_PARAM;; + + } + + /* read control register */ + cntmrCtrl = MV_REG_READ(CNTMR_CTRL_REG); + + /* enable counter\timer */ + cntmrCtrl |= CTCR_ARM_TIMER_EN(countNum); + + + MV_REG_WRITE(CNTMR_CTRL_REG,cntmrCtrl); + + return MV_OK; +} + +/******************************************************************************* +* mvCntmrDisable - +* +* DESCRIPTION: +* Stop the counter/timer running, and returns its Value +* +* INPUT: +* countNum - counter number +* +* OUTPUT: +* None. +* +* RETURN: +* MV_U32 counter\timer value +*******************************************************************************/ +MV_STATUS mvCntmrDisable(MV_U32 countNum) +{ + MV_U32 cntmrCtrl; + + if (countNum >= MV_CNTMR_MAX_COUNTER ) + { + + DB(mvOsPrintf(("mvCntmrDisable: Err. Illigal counter number \n"))); + return MV_BAD_PARAM;; + + } + + /* read control register */ + cntmrCtrl = MV_REG_READ(CNTMR_CTRL_REG); + + /* disable counter\timer */ + cntmrCtrl &= ~CTCR_ARM_TIMER_EN(countNum); + + MV_REG_WRITE(CNTMR_CTRL_REG,cntmrCtrl); + + return MV_OK; +} + +/******************************************************************************* +* mvCntmrStart - +* +* DESCRIPTION: +* Combined all the sub-operations above to one function: Load,setMode,Enable +* +* INPUT: +* countNum - counter number +* value - value of the counter\timer to be set +* pCtrl - pointer to MV_CNTMR_CTRL structure +* +* OUTPUT: +* None. +* +* RETURN: +* MV_BAD_PARAM on bad parameters , MV_ERROR on error ,MV_OK on sucess +*******************************************************************************/ +MV_STATUS mvCntmrStart(MV_U32 countNum, MV_U32 value, + MV_CNTMR_CTRL *pCtrl) +{ + + if (countNum >= MV_CNTMR_MAX_COUNTER ) + { + + mvOsPrintf(("mvCntmrDisable: Err. Illigal counter number \n")); + return MV_BAD_PARAM;; + + } + + /* load value onto counter\timer */ + mvCntmrLoad(countNum,value); + + /* set the counter to load in the first time */ + mvCntmrWrite(countNum,value); + + /* set control for timer \ cunter and enable */ + mvCntmrCtrlSet(countNum,pCtrl); + + return MV_OK; +} + diff --git a/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/mv_hal/cntmr/mvCntmr.h b/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/mv_hal/cntmr/mvCntmr.h new file mode 100644 index 0000000000..b911d0f040 --- /dev/null +++ b/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/mv_hal/cntmr/mvCntmr.h @@ -0,0 +1,121 @@ +/******************************************************************************* +Copyright (C) Marvell International Ltd. and its affiliates + +This software file (the "File") is owned and distributed by Marvell +International Ltd. and/or its affiliates ("Marvell") under the following +alternative licensing terms. Once you have made an election to distribute the +File under one of the following license alternatives, please (i) delete this +introductory statement regarding license alternatives, (ii) delete the two +license alternatives that you have not elected to use and (iii) preserve the +Marvell copyright notice above. + +******************************************************************************** +Marvell Commercial License Option + +If you received this File from Marvell and you have entered into a commercial +license agreement (a "Commercial License") with Marvell, the File is licensed +to you under the terms of the applicable Commercial License. + +******************************************************************************** +Marvell GPL License Option + +If you received this File from Marvell, you may opt to use, redistribute and/or +modify this File in accordance with the terms and conditions of the General +Public License Version 2, June 1991 (the "GPL License"), a copy of which is +available along with the File in the license.txt file or by writing to the Free +Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or +on the worldwide web at http://www.gnu.org/licenses/gpl.txt. + +THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED +WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY +DISCLAIMED. The GPL License provides additional details about this warranty +disclaimer. +******************************************************************************** +Marvell BSD License Option + +If you received this File from Marvell, you may opt to use, redistribute and/or +modify this File under the following licensing terms. +Redistribution and use in source and binary forms, with or without modification, +are permitted provided that the following conditions are met: + + * Redistributions of source code must retain the above copyright notice, + this list of conditions and the following disclaimer. + + * Redistributions in binary form must reproduce the above copyright + notice, this list of conditions and the following disclaimer in the + documentation and/or other materials provided with the distribution. + + * Neither the name of Marvell nor the names of its contributors may be + used to endorse or promote products derived from this software without + specific prior written permission. + +THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND +ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED +WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE +DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR +ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES +(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; +LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON +ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS +SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + +*******************************************************************************/ + +#ifndef __INCmvTmrWtdgh +#define __INCmvTmrWtdgh + +/* includes */ +#include "mvCommon.h" +#include "mvOs.h" +#include "cntmr/mvCntmrRegs.h" +#include "ctrlEnv/mvCtrlEnvSpec.h" + + +/* This enumerator describe counters\watchdog numbers */ +typedef enum _mvCntmrID +{ + TIMER0 = 0, + TIMER1, + WATCHDOG, + TIMER2, + TIMER3, +}MV_CNTMR_ID; + + +/* Counter / Timer control structure */ +typedef struct _mvCntmrCtrl +{ + MV_BOOL enable; /* enable */ + MV_BOOL autoEnable; /* counter/Timer */ +}MV_CNTMR_CTRL; + + +/* Functions */ + +/* Load an init Value to a given counter/timer */ +MV_STATUS mvCntmrLoad(MV_U32 countNum, MV_U32 value); + +/* Returns the value of the given Counter/Timer */ +MV_U32 mvCntmrRead(MV_U32 countNum); + +/* Write a value of the given Counter/Timer */ +void mvCntmrWrite(MV_U32 countNum,MV_U32 countVal); + +/* Set the Control to a given counter/timer */ +MV_STATUS mvCntmrCtrlSet(MV_U32 countNum, MV_CNTMR_CTRL *pCtrl); + +/* Get the value of a given counter/timer */ +MV_STATUS mvCntmrCtrlGet(MV_U32 countNum, MV_CNTMR_CTRL *pCtrl); + +/* Set the Enable-Bit to logic '1' ==> starting the counter. */ +MV_STATUS mvCntmrEnable(MV_U32 countNum); + +/* Stop the counter/timer running, and returns its Value. */ +MV_STATUS mvCntmrDisable(MV_U32 countNum); + +/* Combined all the sub-operations above to one function: Load,setMode,Enable */ +MV_STATUS mvCntmrStart(MV_U32 countNum, MV_U32 value, + MV_CNTMR_CTRL *pCtrl); + +#endif /* __INCmvTmrWtdgh */ diff --git a/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/mv_hal/cntmr/mvCntmrRegs.h b/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/mv_hal/cntmr/mvCntmrRegs.h new file mode 100644 index 0000000000..b69bc66ad2 --- /dev/null +++ b/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/mv_hal/cntmr/mvCntmrRegs.h @@ -0,0 +1,121 @@ +/******************************************************************************* +Copyright (C) Marvell International Ltd. and its affiliates + +This software file (the "File") is owned and distributed by Marvell +International Ltd. and/or its affiliates ("Marvell") under the following +alternative licensing terms. Once you have made an election to distribute the +File under one of the following license alternatives, please (i) delete this +introductory statement regarding license alternatives, (ii) delete the two +license alternatives that you have not elected to use and (iii) preserve the +Marvell copyright notice above. + +******************************************************************************** +Marvell Commercial License Option + +If you received this File from Marvell and you have entered into a commercial +license agreement (a "Commercial License") with Marvell, the File is licensed +to you under the terms of the applicable Commercial License. + +******************************************************************************** +Marvell GPL License Option + +If you received this File from Marvell, you may opt to use, redistribute and/or +modify this File in accordance with the terms and conditions of the General +Public License Version 2, June 1991 (the "GPL License"), a copy of which is +available along with the File in the license.txt file or by writing to the Free +Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or +on the worldwide web at http://www.gnu.org/licenses/gpl.txt. + +THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED +WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY +DISCLAIMED. The GPL License provides additional details about this warranty +disclaimer. +******************************************************************************** +Marvell BSD License Option + +If you received this File from Marvell, you may opt to use, redistribute and/or +modify this File under the following licensing terms. +Redistribution and use in source and binary forms, with or without modification, +are permitted provided that the following conditions are met: + + * Redistributions of source code must retain the above copyright notice, + this list of conditions and the following disclaimer. + + * Redistributions in binary form must reproduce the above copyright + notice, this list of conditions and the following disclaimer in the + documentation and/or other materials provided with the distribution. + + * Neither the name of Marvell nor the names of its contributors may be + used to endorse or promote products derived from this software without + specific prior written permission. + +THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND +ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED +WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE +DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR +ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES +(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; +LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON +ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS +SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + +*******************************************************************************/ + +#ifndef __INCmvTmrwtdgRegsh +#define __INCmvTmrwtdgRegsh + +/*******************************************/ +/* ARM Timers Registers Map */ +/*******************************************/ + +#define CNTMR_RELOAD_REG(tmrNum) (CNTMR_BASE + 0x10 + (tmrNum)*8 + \ + (((tmrNum) <= 3)?0:8)) +#define CNTMR_VAL_REG(tmrNum) (CNTMR_BASE + 0x14 + (tmrNum)*8 + \ + (((tmrNum) <= 3)?0:8)) +#define CNTMR_CTRL_REG (CNTMR_BASE) + +/*For MV78XX0*/ +#define CNTMR_CAUSE_REG (CPU_AHB_MBUS_CAUSE_INT_REG(whoAmI())) +#define CNTMR_MASK_REG (CPU_AHB_MBUS_MASK_INT_REG(whoAmI())) + +/* ARM Timers Registers Map */ +/*******************************************/ + + +/* ARM Timers Control Register */ +/* CPU_TIMERS_CTRL_REG (CTCR) */ + +#define TIMER0_NUM 0 +#define TIMER1_NUM 1 +#define WATCHDOG_NUM 2 +#define TIMER2_NUM 3 +#define TIMER3_NUM 4 + +#define CTCR_ARM_TIMER_EN_OFFS(cntr) (cntr * 2) +#define CTCR_ARM_TIMER_EN_MASK(cntr) (1 << CTCR_ARM_TIMER_EN_OFFS) +#define CTCR_ARM_TIMER_EN(cntr) (1 << CTCR_ARM_TIMER_EN_OFFS(cntr)) +#define CTCR_ARM_TIMER_DIS(cntr) (0 << CTCR_ARM_TIMER_EN_OFFS(cntr)) + +#define CTCR_ARM_TIMER_AUTO_OFFS(cntr) ((cntr * 2) + 1) +#define CTCR_ARM_TIMER_AUTO_MASK(cntr) BIT1 +#define CTCR_ARM_TIMER_AUTO_EN(cntr) (1 << CTCR_ARM_TIMER_AUTO_OFFS(cntr)) +#define CTCR_ARM_TIMER_AUTO_DIS(cntr) (0 << CTCR_ARM_TIMER_AUTO_OFFS(cntr)) + + +/* ARM Timer\Watchdog Reload Register */ +/* CNTMR_RELOAD_REG (TRR) */ + +#define TRG_ARM_TIMER_REL_OFFS 0 +#define TRG_ARM_TIMER_REL_MASK 0xffffffff + +/* ARM Timer\Watchdog Register */ +/* CNTMR_VAL_REG (TVRG) */ + +#define TVR_ARM_TIMER_OFFS 0 +#define TVR_ARM_TIMER_MASK 0xffffffff +#define TVR_ARM_TIMER_MAX 0xffffffff + + + +#endif /* __INCmvTmrwtdgRegsh */ diff --git a/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/mv_hal/cpu/mvCpuCntrs.c b/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/mv_hal/cpu/mvCpuCntrs.c new file mode 100644 index 0000000000..609e674e3a --- /dev/null +++ b/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/mv_hal/cpu/mvCpuCntrs.c @@ -0,0 +1,207 @@ +/* + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include "mvOs.h" +#include "mvCpuCntrs.h" + + +const static MV_CPU_CNTRS_OPS mvCpuCntrsOpsTbl[MV_CPU_CNTRS_NUM][MV_CPU_CNTRS_OPS_NUM] = +{ + /*0*/ + { + MV_CPU_CNTRS_CYCLES, MV_CPU_CNTRS_DCACHE_READ_HIT, MV_CPU_CNTRS_DCACHE_READ_MISS, + MV_CPU_CNTRS_DCACHE_WRITE_HIT, MV_CPU_CNTRS_DCACHE_WRITE_MISS, MV_CPU_CNTRS_INSTRUCTIONS, + MV_CPU_CNTRS_INVALID, MV_CPU_CNTRS_INVALID, MV_CPU_CNTRS_INVALID, + MV_CPU_CNTRS_MMU_READ_LATENCY, MV_CPU_CNTRS_ICACHE_READ_LATENCY, MV_CPU_CNTRS_WB_WRITE_LATENCY, + MV_CPU_CNTRS_LDM_STM_HOLD, MV_CPU_CNTRS_INVALID, MV_CPU_CNTRS_INVALID, + MV_CPU_CNTRS_DATA_WRITE_ACCESS, MV_CPU_CNTRS_DATA_READ_ACCESS, MV_CPU_CNTRS_INVALID, + MV_CPU_CNTRS_BRANCH_PREDICT_COUNT, + }, + /*1*/ + { + MV_CPU_CNTRS_CYCLES, MV_CPU_CNTRS_ICACHE_READ_MISS, MV_CPU_CNTRS_DCACHE_READ_MISS, + MV_CPU_CNTRS_DCACHE_WRITE_MISS, MV_CPU_CNTRS_ITLB_MISS, MV_CPU_CNTRS_SINGLE_ISSUE, + MV_CPU_CNTRS_INVALID, MV_CPU_CNTRS_BRANCH_RETIRED, MV_CPU_CNTRS_INVALID, + MV_CPU_CNTRS_MMU_READ_BEAT, MV_CPU_CNTRS_ICACHE_READ_LATENCY, MV_CPU_CNTRS_WB_WRITE_BEAT, + MV_CPU_CNTRS_INVALID, MV_CPU_CNTRS_IS_HOLD, MV_CPU_CNTRS_DATA_READ_ACCESS, + MV_CPU_CNTRS_INVALID, MV_CPU_CNTRS_INVALID, MV_CPU_CNTRS_INVALID, + MV_CPU_CNTRS_INVALID, + }, + /*2*/ + { + MV_CPU_CNTRS_CYCLES, MV_CPU_CNTRS_INVALID, MV_CPU_CNTRS_DCACHE_ACCESS, + MV_CPU_CNTRS_DTLB_MISS, MV_CPU_CNTRS_INVALID, MV_CPU_CNTRS_INVALID, + MV_CPU_CNTRS_INVALID, MV_CPU_CNTRS_BRANCH_PREDICT_MISS, MV_CPU_CNTRS_WB_WRITE_BEAT, + MV_CPU_CNTRS_INVALID, MV_CPU_CNTRS_DCACHE_READ_LATENCY, MV_CPU_CNTRS_DCACHE_WRITE_LATENCY, + MV_CPU_CNTRS_INVALID, MV_CPU_CNTRS_INVALID, MV_CPU_CNTRS_BIU_SIMULT_ACCESS, + MV_CPU_CNTRS_INVALID, MV_CPU_CNTRS_INVALID, MV_CPU_CNTRS_INVALID, + MV_CPU_CNTRS_INVALID, + }, + /*3*/ + { + MV_CPU_CNTRS_CYCLES, MV_CPU_CNTRS_DCACHE_READ_MISS, MV_CPU_CNTRS_DCACHE_WRITE_MISS, + MV_CPU_CNTRS_TLB_MISS, MV_CPU_CNTRS_INVALID, MV_CPU_CNTRS_INVALID, + MV_CPU_CNTRS_INVALID, MV_CPU_CNTRS_BRANCH_TAKEN, MV_CPU_CNTRS_WB_FULL_CYCLES, + MV_CPU_CNTRS_INVALID, MV_CPU_CNTRS_DCACHE_READ_BEAT, MV_CPU_CNTRS_DCACHE_WRITE_BEAT, + MV_CPU_CNTRS_INVALID, MV_CPU_CNTRS_INVALID, MV_CPU_CNTRS_BIU_ANY_ACCESS, + MV_CPU_CNTRS_INVALID, MV_CPU_CNTRS_INVALID, MV_CPU_CNTRS_DATA_WRITE_ACCESS, + MV_CPU_CNTRS_INVALID, + } +}; + +MV_CPU_CNTRS_ENTRY mvCpuCntrsTbl[MV_CPU_CNTRS_NUM]; + +MV_CPU_CNTRS_EVENT* mvCpuCntrsEventTbl[128]; + +void mvCpuCntrsReset(void) +{ + MV_U32 reg = 0; + + MV_ASM ("mcr p15, 0, %0, c15, c13, 0" : : "r" (reg)); + MV_ASM ("mcr p15, 0, %0, c15, c13, 1" : : "r" (reg)); + MV_ASM ("mcr p15, 0, %0, c15, c13, 2" : : "r" (reg)); + MV_ASM ("mcr p15, 0, %0, c15, c13, 3" : : "r" (reg)); + MV_ASM ("mcr p15, 0, %0, c15, c13, 4" : : "r" (reg)); + MV_ASM ("mcr p15, 0, %0, c15, c13, 5" : : "r" (reg)); + MV_ASM ("mcr p15, 0, %0, c15, c13, 6" : : "r" (reg)); + MV_ASM ("mcr p15, 0, %0, c15, c13, 7" : : "r" (reg)); +} + +void program_counter(int counter, int op) +{ + MV_U32 reg = (1 << op) | 0x1; /*enable*/ + + switch(counter) + { + case 0: + __asm__ __volatile__ ("mcr p15, 0, %0, c15, c12, 0" : : "r" (reg)); + return; + + case 1: + __asm__ __volatile__ ("mcr p15, 0, %0, c15, c12, 1" : : "r" (reg)); + return; + + case 2: + __asm__ __volatile__ ("mcr p15, 0, %0, c15, c12, 2" : : "r" (reg)); + return; + + case 3: + __asm__ __volatile__ ("mcr p15, 0, %0, c15, c12, 3" : : "r" (reg)); + return; + + default: + mvOsPrintf("error in program_counter: bad counter number (%d)\n", counter); + } + return; +} + +void mvCpuCntrsEventClear(MV_CPU_CNTRS_EVENT* pEvent) +{ + int i; + + for(i=0; icounters_sum[i] = 0; + } + pEvent->num_of_measurements = 0; +} + + +MV_CPU_CNTRS_EVENT* mvCpuCntrsEventCreate(char* name, MV_U32 print_threshold) +{ + int i; + MV_CPU_CNTRS_EVENT* event = mvOsMalloc(sizeof(MV_CPU_CNTRS_EVENT)); + + if(event) + { + strncpy(event->name, name, sizeof(event->name)); + event->num_of_measurements = 0; + event->avg_sample_count = print_threshold; + for(i=0; icounters_before[i] = 0; + event->counters_after[i] = 0; + event->counters_sum[i] = 0; + } + } + return event; +} + +void mvCpuCntrsEventDelete(MV_CPU_CNTRS_EVENT* event) +{ + if(event != NULL) + mvOsFree(event); +} + + +MV_STATUS mvCpuCntrsProgram(int counter, MV_CPU_CNTRS_OPS op, + char* name, MV_U32 overhead) +{ + int i; + + /* Find required operations */ + for(i=0; inum_of_measurements < pEvent->avg_sample_count) + return; + + mvOsPrintf("%16s: ", pEvent->name); + for(i=0; icounters_sum[i], + pEvent->num_of_measurements, NULL); + if(counters_avg >= mvCpuCntrsTbl[i].overhead) + counters_avg -= mvCpuCntrsTbl[i].overhead; + else + counters_avg = 0; + + mvOsPrintf("%s=%5llu, ", mvCpuCntrsTbl[i].name, counters_avg); + } + mvOsPrintf("\n"); + mvCpuCntrsEventClear(pEvent); + mvCpuCntrsReset(); +} + +void mvCpuCntrsStatus(void) +{ + int i; + + for(i=0; icounters_before[i] = mvCpuCntrsRead(i); +#else + pEvent->counters_before[1] = mvCpuCntrsRead(1); + pEvent->counters_before[3] = mvCpuCntrsRead(3); + pEvent->counters_before[0] = mvCpuCntrsRead(0); + pEvent->counters_before[2] = mvCpuCntrsRead(2); +#endif +} + +static INLINE void mvCpuCntrsReadAfter(MV_CPU_CNTRS_EVENT* pEvent) +{ + int i; + +#if 0 + /* order is important - we want to measure the cycle count first here! */ + for(i=0; icounters_after[i] = mvCpuCntrsRead(i); +#else + pEvent->counters_after[2] = mvCpuCntrsRead(2); + pEvent->counters_after[0] = mvCpuCntrsRead(0); + pEvent->counters_after[3] = mvCpuCntrsRead(3); + pEvent->counters_after[1] = mvCpuCntrsRead(1); +#endif + + for(i=0; icounters_sum[i] += (pEvent->counters_after[i] - pEvent->counters_before[i]); + } + pEvent->num_of_measurements++; +} + + +#ifdef CONFIG_MV_CPU_PERF_CNTRS + +#define MV_CPU_CNTRS_READ(counter) mvCpuCntrsRead(counter) + +#define MV_CPU_CNTRS_START(event) mvCpuCntrsReadBefore(event) + +#define MV_CPU_CNTRS_STOP(event) mvCpuCntrsReadAfter(event) + +#define MV_CPU_CNTRS_SHOW(event) mvCpuCntrsShow(event) + +#else + +#define MV_CPU_CNTRS_READ(counter) +#define MV_CPU_CNTRS_START(event) +#define MV_CPU_CNTRS_STOP(event) +#define MV_CPU_CNTRS_SHOW(event) + +#endif /* CONFIG_MV_CPU_PERF_CNTRS */ + + +#endif /* __mvCpuCntrs_h__ */ + diff --git a/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/mv_hal/cpu/mvCpuL2Cntrs.c b/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/mv_hal/cpu/mvCpuL2Cntrs.c new file mode 100644 index 0000000000..033386224f --- /dev/null +++ b/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/mv_hal/cpu/mvCpuL2Cntrs.c @@ -0,0 +1,143 @@ +/* + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include "mvOs.h" +#include "mvCpuL2Cntrs.h" + + + +MV_CPU_L2_CNTRS_ENTRY mvCpuL2CntrsTbl[MV_CPU_L2_CNTRS_NUM]; + +MV_CPU_L2_CNTRS_EVENT* mvCpuL2CntrsEventTbl[128]; + +void mvCpuL2CntrsReset(void) +{ + MV_U32 reg = 0; + + MV_ASM ("mcr p15, 6, %0, c15, c13, 0" : : "r" (reg)); + MV_ASM ("mcr p15, 6, %0, c15, c13, 1" : : "r" (reg)); + MV_ASM ("mcr p15, 6, %0, c15, c13, 2" : : "r" (reg)); + MV_ASM ("mcr p15, 6, %0, c15, c13, 3" : : "r" (reg)); +} + +static void mvCpuL2CntrConfig(int counter, int op) +{ + MV_U32 reg = (1 << op) | 0x1; /*enable*/ + + switch(counter) + { + case 0: + MV_ASM ("mcr p15, 6, %0, c15, c12, 0" : : "r" (reg)); + return; + + case 1: + MV_ASM ("mcr p15, 6, %0, c15, c12, 1" : : "r" (reg)); + return; + + default: + mvOsPrintf("mvCpuL2CntrConfig: bad counter number (%d)\n", counter); + } + return; +} + +void mvCpuL2CntrsEventClear(MV_CPU_L2_CNTRS_EVENT* pEvent) +{ + int i; + + for(i=0; icounters_sum[i] = 0; + } + pEvent->num_of_measurements = 0; +} + + +MV_CPU_L2_CNTRS_EVENT* mvCpuL2CntrsEventCreate(char* name, MV_U32 print_threshold) +{ + int i; + MV_CPU_L2_CNTRS_EVENT* event = mvOsMalloc(sizeof(MV_CPU_L2_CNTRS_EVENT)); + + if(event) + { + strncpy(event->name, name, sizeof(event->name)); + event->num_of_measurements = 0; + event->avg_sample_count = print_threshold; + for(i=0; icounters_before[i] = 0; + event->counters_after[i] = 0; + event->counters_sum[i] = 0; + } + } + return event; +} + +void mvCpuL2CntrsEventDelete(MV_CPU_L2_CNTRS_EVENT* event) +{ + if(event != NULL) + mvOsFree(event); +} + + +MV_STATUS mvCpuL2CntrsProgram(int counter, MV_CPU_L2_CNTRS_OPS op, + char* name, MV_U32 overhead) +{ + strncpy(mvCpuL2CntrsTbl[counter].name, name, sizeof(mvCpuL2CntrsTbl[counter].name)); + mvCpuL2CntrsTbl[counter].operation = op; + mvCpuL2CntrsTbl[counter].opIdx = op; + mvCpuL2CntrsTbl[counter].overhead = overhead; + mvCpuL2CntrConfig(counter, op); + mvOsPrintf("CPU L2 Counter %d: operation=%d, overhead=%d\n", + counter, op, overhead); + return MV_OK; +} + +void mvCpuL2CntrsShow(MV_CPU_L2_CNTRS_EVENT* pEvent) +{ + int i; + MV_U64 counters_avg; + + if(pEvent->num_of_measurements < pEvent->avg_sample_count) + return; + + mvOsPrintf("%16s: ", pEvent->name); + for(i=0; icounters_sum[i], + pEvent->num_of_measurements, NULL); + + if(counters_avg >= mvCpuL2CntrsTbl[i].overhead) + counters_avg -= mvCpuL2CntrsTbl[i].overhead; + else + counters_avg = 0; + + mvOsPrintf("%s=%5llu, ", mvCpuL2CntrsTbl[i].name, counters_avg); + } + mvOsPrintf("\n"); + mvCpuL2CntrsEventClear(pEvent); + mvCpuL2CntrsReset(); +} + +void mvCpuL2CntrsStatus(void) +{ + int i; + + for(i=0; icounters_before[i] = mvCpuL2CntrsRead(i); +} + +static INLINE void mvCpuL2CntrsReadAfter(MV_CPU_L2_CNTRS_EVENT* pEvent) +{ + int i; + + for(i=0; icounters_after[i] = mvCpuL2CntrsRead(i); + pEvent->counters_sum[i] += (pEvent->counters_after[i] - pEvent->counters_before[i]); + } + pEvent->num_of_measurements++; +} + + +#ifdef CONFIG_MV_CPU_L2_PERF_CNTRS + +#define MV_CPU_L2_CNTRS_READ(counter) mvCpuL2CntrsRead(counter) + +#define MV_CPU_L2_CNTRS_START(event) mvCpuL2CntrsReadBefore(event) + +#define MV_CPU_L2_CNTRS_STOP(event) mvCpuL2CntrsReadAfter(event) + +#define MV_CPU_L2_CNTRS_SHOW(event) mvCpuL2CntrsShow(event) + +#else + +#define MV_CPU_L2_CNTRS_READ(counter) +#define MV_CPU_L2_CNTRS_START(event) +#define MV_CPU_L2_CNTRS_STOP(event) +#define MV_CPU_L2_CNTRS_SHOW(event) + +#endif /* CONFIG_MV_CPU_L2_PERF_CNTRS */ + + +#endif /* __mvCpuL2Cntrs_h__ */ + diff --git a/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/mv_hal/ddr1_2/mvDram.c b/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/mv_hal/ddr1_2/mvDram.c new file mode 100644 index 0000000000..d1b8a3d378 --- /dev/null +++ b/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/mv_hal/ddr1_2/mvDram.c @@ -0,0 +1,1479 @@ +/******************************************************************************* +Copyright (C) Marvell International Ltd. and its affiliates + +This software file (the "File") is owned and distributed by Marvell +International Ltd. and/or its affiliates ("Marvell") under the following +alternative licensing terms. Once you have made an election to distribute the +File under one of the following license alternatives, please (i) delete this +introductory statement regarding license alternatives, (ii) delete the two +license alternatives that you have not elected to use and (iii) preserve the +Marvell copyright notice above. + +******************************************************************************** +Marvell Commercial License Option + +If you received this File from Marvell and you have entered into a commercial +license agreement (a "Commercial License") with Marvell, the File is licensed +to you under the terms of the applicable Commercial License. + +******************************************************************************** +Marvell GPL License Option + +If you received this File from Marvell, you may opt to use, redistribute and/or +modify this File in accordance with the terms and conditions of the General +Public License Version 2, June 1991 (the "GPL License"), a copy of which is +available along with the File in the license.txt file or by writing to the Free +Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or +on the worldwide web at http://www.gnu.org/licenses/gpl.txt. + +THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED +WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY +DISCLAIMED. The GPL License provides additional details about this warranty +disclaimer. +******************************************************************************** +Marvell BSD License Option + +If you received this File from Marvell, you may opt to use, redistribute and/or +modify this File under the following licensing terms. +Redistribution and use in source and binary forms, with or without modification, +are permitted provided that the following conditions are met: + + * Redistributions of source code must retain the above copyright notice, + this list of conditions and the following disclaimer. + + * Redistributions in binary form must reproduce the above copyright + notice, this list of conditions and the following disclaimer in the + documentation and/or other materials provided with the distribution. + + * Neither the name of Marvell nor the names of its contributors may be + used to endorse or promote products derived from this software without + specific prior written permission. + +THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND +ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED +WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE +DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR +ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES +(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; +LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON +ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS +SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + +*******************************************************************************/ + +#include "ddr1_2/mvDram.h" +#include "boardEnv/mvBoardEnvLib.h" + +#undef MV_DEBUG +#ifdef MV_DEBUG +#define DB(x) x +#else +#define DB(x) +#endif + +static MV_VOID cpyDimm2BankInfo(MV_DIMM_INFO *pDimmInfo, + MV_DRAM_BANK_INFO *pBankInfo); +static MV_U32 cas2ps(MV_U8 spd_byte); +/******************************************************************************* +* mvDramBankGet - Get the DRAM bank paramters. +* +* DESCRIPTION: +* This function retrieves DRAM bank parameters as described in +* DRAM_BANK_INFO struct to the controller DRAM unit. In case the board +* has its DRAM on DIMMs it will use its EEPROM to extract SPD data +* from it. Otherwise, if the DRAM is soldered on board, the function +* should insert its bank information into MV_DRAM_BANK_INFO struct. +* +* INPUT: +* bankNum - Board DRAM bank number. +* +* OUTPUT: +* pBankInfo - DRAM bank information struct. +* +* RETURN: +* MV_FAIL - Bank parameters could not be read. +* +*******************************************************************************/ +MV_STATUS mvDramBankInfoGet(MV_U32 bankNum, MV_DRAM_BANK_INFO *pBankInfo) +{ + MV_DIMM_INFO dimmInfo; + + DB(mvOsPrintf("Dram: mvDramBankInfoGet bank %d\n", bankNum)); + /* zero pBankInfo structure */ + memset(pBankInfo, 0, sizeof(*pBankInfo)); + + if((NULL == pBankInfo) || (bankNum >= MV_DRAM_MAX_CS )) + { + DB(mvOsPrintf("Dram: mvDramBankInfoGet bad params \n")); + return MV_BAD_PARAM; + } + if( MV_OK != dimmSpdGet((MV_U32)(bankNum/2), &dimmInfo)) + { + DB(mvOsPrintf("Dram: ERR dimmSpdGet failed to get dimm info \n")); + return MV_FAIL; + } + if((dimmInfo.numOfModuleBanks == 1) && ((bankNum % 2) == 1)) + { + DB(mvOsPrintf("Dram: ERR dimmSpdGet. Can't find DIMM bank 2 \n")); + return MV_FAIL; + } + + /* convert Dimm info to Bank info */ + cpyDimm2BankInfo(&dimmInfo, pBankInfo); + + return MV_OK; +} + +/******************************************************************************* +* cpyDimm2BankInfo - Convert a Dimm info struct into a bank info struct. +* +* DESCRIPTION: +* Convert a Dimm info struct into a bank info struct. +* +* INPUT: +* pDimmInfo - DIMM information structure. +* +* OUTPUT: +* pBankInfo - DRAM bank information struct. +* +* RETURN: +* None. +* +*******************************************************************************/ +static MV_VOID cpyDimm2BankInfo(MV_DIMM_INFO *pDimmInfo, + MV_DRAM_BANK_INFO *pBankInfo) +{ + pBankInfo->memoryType = pDimmInfo->memoryType; + + /* DIMM dimensions */ + pBankInfo->numOfRowAddr = pDimmInfo->numOfRowAddr; + pBankInfo->numOfColAddr = pDimmInfo->numOfColAddr; + pBankInfo->dataWidth = pDimmInfo->dataWidth; + pBankInfo->errorCheckType = pDimmInfo->errorCheckType; + pBankInfo->sdramWidth = pDimmInfo->sdramWidth; + pBankInfo->errorCheckDataWidth = pDimmInfo->errorCheckDataWidth; + pBankInfo->numOfBanksOnEachDevice = pDimmInfo->numOfBanksOnEachDevice; + pBankInfo->suportedCasLatencies = pDimmInfo->suportedCasLatencies; + pBankInfo->refreshInterval = pDimmInfo->refreshInterval; + + /* DIMM timing parameters */ + pBankInfo->minCycleTimeAtMaxCasLatPs = pDimmInfo->minCycleTimeAtMaxCasLatPs; + pBankInfo->minCycleTimeAtMaxCasLatMinus1Ps = + pDimmInfo->minCycleTimeAtMaxCasLatMinus1Ps; + pBankInfo->minCycleTimeAtMaxCasLatMinus2Ps = + pDimmInfo->minCycleTimeAtMaxCasLatMinus2Ps; + + pBankInfo->minRowPrechargeTime = pDimmInfo->minRowPrechargeTime; + pBankInfo->minRowActiveToRowActive = pDimmInfo->minRowActiveToRowActive; + pBankInfo->minRasToCasDelay = pDimmInfo->minRasToCasDelay; + pBankInfo->minRasPulseWidth = pDimmInfo->minRasPulseWidth; + pBankInfo->minWriteRecoveryTime = pDimmInfo->minWriteRecoveryTime; + pBankInfo->minWriteToReadCmdDelay = pDimmInfo->minWriteToReadCmdDelay; + pBankInfo->minReadToPrechCmdDelay = pDimmInfo->minReadToPrechCmdDelay; + pBankInfo->minRefreshToActiveCmd = pDimmInfo->minRefreshToActiveCmd; + + /* Parameters calculated from the extracted DIMM information */ + pBankInfo->size = pDimmInfo->size/pDimmInfo->numOfModuleBanks; + pBankInfo->deviceDensity = pDimmInfo->deviceDensity; + pBankInfo->numberOfDevices = pDimmInfo->numberOfDevices / + pDimmInfo->numOfModuleBanks; + + /* DIMM attributes (MV_TRUE for yes) */ + + if ((pDimmInfo->memoryType == MEM_TYPE_SDRAM) || + (pDimmInfo->memoryType == MEM_TYPE_DDR1) ) + { + if (pDimmInfo->dimmAttributes & BIT1) + pBankInfo->registeredAddrAndControlInputs = MV_TRUE; + else + pBankInfo->registeredAddrAndControlInputs = MV_FALSE; + } + else /* pDimmInfo->memoryType == MEM_TYPE_DDR2 */ + { + if (pDimmInfo->dimmTypeInfo & (BIT0 | BIT4)) + pBankInfo->registeredAddrAndControlInputs = MV_TRUE; + else + pBankInfo->registeredAddrAndControlInputs = MV_FALSE; + } + + return; +} + +/******************************************************************************* +* dimmSpdCpy - Cpy SPD parameters from dimm 0 to dimm 1. +* +* DESCRIPTION: +* Read the DIMM SPD parameters from dimm 0 into dimm 1 SPD. +* +* INPUT: +* None. +* +* OUTPUT: +* None. +* +* RETURN: +* MV_TRUE if function could read DIMM parameters, MV_FALSE otherwise. +* +*******************************************************************************/ +MV_STATUS dimmSpdCpy(MV_VOID) +{ + MV_U32 i; + MV_U32 spdChecksum; + + MV_TWSI_SLAVE twsiSlave; + MV_U8 data[SPD_SIZE]; + + /* zero dimmInfo structure */ + memset(data, 0, SPD_SIZE); + + /* read the dimm eeprom */ + DB(mvOsPrintf("DRAM: Read Dimm eeprom\n")); + twsiSlave.slaveAddr.address = MV_BOARD_DIMM0_I2C_ADDR; + twsiSlave.slaveAddr.type = ADDR7_BIT; + twsiSlave.validOffset = MV_TRUE; + twsiSlave.offset = 0; + twsiSlave.moreThen256 = MV_FALSE; + + if( MV_OK != mvTwsiRead (MV_BOARD_DIMM_I2C_CHANNEL, + &twsiSlave, data, SPD_SIZE) ) + { + DB(mvOsPrintf("DRAM: ERR. no DIMM in dimmNum 0\n")); + return MV_FAIL; + } + DB(puts("DRAM: Reading dimm info succeded.\n")); + + /* calculate SPD checksum */ + spdChecksum = 0; + + for(i = 0 ; i <= 62 ; i++) + { + spdChecksum += data[i]; + } + + if ((spdChecksum & 0xff) != data[63]) + { + DB(mvOsPrintf("DRAM: Warning. Wrong SPD Checksum %2x, expValue=%2x\n", + (MV_U32)(spdChecksum & 0xff), data[63])); + } + else + { + DB(mvOsPrintf("DRAM: SPD Checksum ok!\n")); + } + + /* copy the SPD content 1:1 into the DIMM 1 SPD */ + twsiSlave.slaveAddr.address = MV_BOARD_DIMM1_I2C_ADDR; + twsiSlave.slaveAddr.type = ADDR7_BIT; + twsiSlave.validOffset = MV_TRUE; + twsiSlave.offset = 0; + twsiSlave.moreThen256 = MV_FALSE; + + for(i = 0 ; i < SPD_SIZE ; i++) + { + twsiSlave.offset = i; + if( MV_OK != mvTwsiWrite (MV_BOARD_DIMM_I2C_CHANNEL, + &twsiSlave, &data[i], 1) ) + { + mvOsPrintf("DRAM: ERR. no DIMM in dimmNum 1 byte %d \n",i); + return MV_FAIL; + } + mvOsDelay(5); + } + + DB(puts("DRAM: Reading dimm info succeded.\n")); + return MV_OK; +} + +/******************************************************************************* +* dimmSpdGet - Get the SPD parameters. +* +* DESCRIPTION: +* Read the DIMM SPD parameters into given struct parameter. +* +* INPUT: +* dimmNum - DIMM number. See MV_BOARD_DIMM_NUM enumerator. +* +* OUTPUT: +* pDimmInfo - DIMM information structure. +* +* RETURN: +* MV_TRUE if function could read DIMM parameters, MV_FALSE otherwise. +* +*******************************************************************************/ +MV_STATUS dimmSpdGet(MV_U32 dimmNum, MV_DIMM_INFO *pDimmInfo) +{ + MV_U32 i; + MV_U32 density = 1; + MV_U32 spdChecksum; + + MV_TWSI_SLAVE twsiSlave; + MV_U8 data[SPD_SIZE]; + + if((NULL == pDimmInfo)|| (dimmNum >= MAX_DIMM_NUM)) + { + DB(mvOsPrintf("Dram: mvDramBankInfoGet bad params \n")); + return MV_BAD_PARAM; + } + + /* zero dimmInfo structure */ + memset(data, 0, SPD_SIZE); + + /* read the dimm eeprom */ + DB(mvOsPrintf("DRAM: Read Dimm eeprom\n")); + twsiSlave.slaveAddr.address = (dimmNum == 0) ? + MV_BOARD_DIMM0_I2C_ADDR : MV_BOARD_DIMM1_I2C_ADDR; + twsiSlave.slaveAddr.type = ADDR7_BIT; + twsiSlave.validOffset = MV_TRUE; + twsiSlave.offset = 0; + twsiSlave.moreThen256 = MV_FALSE; + + if( MV_OK != mvTwsiRead (MV_BOARD_DIMM_I2C_CHANNEL, + &twsiSlave, data, SPD_SIZE) ) + { + DB(mvOsPrintf("DRAM: ERR. no DIMM in dimmNum %d \n", dimmNum)); + return MV_FAIL; + } + DB(puts("DRAM: Reading dimm info succeded.\n")); + + /* calculate SPD checksum */ + spdChecksum = 0; + + for(i = 0 ; i <= 62 ; i++) + { + spdChecksum += data[i]; + } + + if ((spdChecksum & 0xff) != data[63]) + { + DB(mvOsPrintf("DRAM: Warning. Wrong SPD Checksum %2x, expValue=%2x\n", + (MV_U32)(spdChecksum & 0xff), data[63])); + } + else + { + DB(mvOsPrintf("DRAM: SPD Checksum ok!\n")); + } + + /* copy the SPD content 1:1 into the dimmInfo structure*/ + for(i = 0 ; i < SPD_SIZE ; i++) + { + pDimmInfo->spdRawData[i] = data[i]; + DB(mvOsPrintf("SPD-EEPROM Byte %3d = %3x (%3d)\n",i, data[i], data[i])); + } + + DB(mvOsPrintf("DRAM SPD Information:\n")); + + /* Memory type (DDR / SDRAM) */ + switch (data[DIMM_MEM_TYPE]) + { + case (DIMM_MEM_TYPE_SDRAM): + pDimmInfo->memoryType = MEM_TYPE_SDRAM; + DB(mvOsPrintf("DRAM Memeory type SDRAM\n")); + break; + case (DIMM_MEM_TYPE_DDR1): + pDimmInfo->memoryType = MEM_TYPE_DDR1; + DB(mvOsPrintf("DRAM Memeory type DDR1\n")); + break; + case (DIMM_MEM_TYPE_DDR2): + pDimmInfo->memoryType = MEM_TYPE_DDR2; + DB(mvOsPrintf("DRAM Memeory type DDR2\n")); + break; + default: + mvOsPrintf("ERROR: Undefined memory type!\n"); + return MV_ERROR; + } + + + /* Number Of Row Addresses */ + pDimmInfo->numOfRowAddr = data[DIMM_ROW_NUM]; + DB(mvOsPrintf("DRAM numOfRowAddr[3] %d\n",pDimmInfo->numOfRowAddr)); + + /* Number Of Column Addresses */ + pDimmInfo->numOfColAddr = data[DIMM_COL_NUM]; + DB(mvOsPrintf("DRAM numOfColAddr[4] %d\n",pDimmInfo->numOfColAddr)); + + /* Number Of Module Banks */ + pDimmInfo->numOfModuleBanks = data[DIMM_MODULE_BANK_NUM]; + DB(mvOsPrintf("DRAM numOfModuleBanks[5] 0x%x\n", + pDimmInfo->numOfModuleBanks)); + + /* Number of module banks encoded differently for DDR2 */ + if (pDimmInfo->memoryType == MEM_TYPE_DDR2) + pDimmInfo->numOfModuleBanks = (pDimmInfo->numOfModuleBanks & 0x7)+1; + + /* Data Width */ + pDimmInfo->dataWidth = data[DIMM_DATA_WIDTH]; + DB(mvOsPrintf("DRAM dataWidth[6] 0x%x\n", pDimmInfo->dataWidth)); + + /* Minimum Cycle Time At Max CasLatancy */ + pDimmInfo->minCycleTimeAtMaxCasLatPs = cas2ps(data[DIMM_MIN_CC_AT_MAX_CAS]); + + /* Error Check Type */ + pDimmInfo->errorCheckType = data[DIMM_ERR_CHECK_TYPE]; + DB(mvOsPrintf("DRAM errorCheckType[11] 0x%x\n", + pDimmInfo->errorCheckType)); + + /* Refresh Interval */ + pDimmInfo->refreshInterval = data[DIMM_REFRESH_INTERVAL]; + DB(mvOsPrintf("DRAM refreshInterval[12] 0x%x\n", + pDimmInfo->refreshInterval)); + + /* Sdram Width */ + pDimmInfo->sdramWidth = data[DIMM_SDRAM_WIDTH]; + DB(mvOsPrintf("DRAM sdramWidth[13] 0x%x\n",pDimmInfo->sdramWidth)); + + /* Error Check Data Width */ + pDimmInfo->errorCheckDataWidth = data[DIMM_ERR_CHECK_DATA_WIDTH]; + DB(mvOsPrintf("DRAM errorCheckDataWidth[14] 0x%x\n", + pDimmInfo->errorCheckDataWidth)); + + /* Burst Length Supported */ + /* SDRAM/DDR1: + *******-******-******-******-******-******-******-******* + * bit7 | bit6 | bit5 | bit4 | bit3 | bit2 | bit1 | bit0 * + *******-******-******-******-******-******-******-******* + burst length = * Page | TBD | TBD | TBD | 8 | 4 | 2 | 1 * + *********************************************************/ + /* DDR2: + *******-******-******-******-******-******-******-******* + * bit7 | bit6 | bit5 | bit4 | bit3 | bit2 | bit1 | bit0 * + *******-******-******-******-******-******-******-******* + burst length = * Page | TBD | TBD | TBD | 8 | 4 | TBD | TBD * + *********************************************************/ + + pDimmInfo->burstLengthSupported = data[DIMM_BURST_LEN_SUP]; + DB(mvOsPrintf("DRAM burstLengthSupported[16] 0x%x\n", + pDimmInfo->burstLengthSupported)); + + /* Number Of Banks On Each Device */ + pDimmInfo->numOfBanksOnEachDevice = data[DIMM_DEV_BANK_NUM]; + DB(mvOsPrintf("DRAM numOfBanksOnEachDevice[17] 0x%x\n", + pDimmInfo->numOfBanksOnEachDevice)); + + /* Suported Cas Latencies */ + + /* SDRAM: + *******-******-******-******-******-******-******-******* + * bit7 | bit6 | bit5 | bit4 | bit3 | bit2 | bit1 | bit0 * + *******-******-******-******-******-******-******-******* + CAS = * TBD | 7 | 6 | 5 | 4 | 3 | 2 | 1 * + ********************************************************/ + + /* DDR 1: + *******-******-******-******-******-******-******-******* + * bit7 | bit6 | bit5 | bit4 | bit3 | bit2 | bit1 | bit0 * + *******-******-******-******-******-******-******-******* + CAS = * TBD | 4 | 3.5 | 3 | 2.5 | 2 | 1.5 | 1 * + *********************************************************/ + + /* DDR 2: + *******-******-******-******-******-******-******-******* + * bit7 | bit6 | bit5 | bit4 | bit3 | bit2 | bit1 | bit0 * + *******-******-******-******-******-******-******-******* + CAS = * TBD | TBD | 5 | 4 | 3 | 2 | TBD | TBD * + *********************************************************/ + + pDimmInfo->suportedCasLatencies = data[DIMM_SUP_CAL]; + DB(mvOsPrintf("DRAM suportedCasLatencies[18] 0x%x\n", + pDimmInfo->suportedCasLatencies)); + + /* For DDR2 only, get the DIMM type information */ + if (pDimmInfo->memoryType == MEM_TYPE_DDR2) + { + pDimmInfo->dimmTypeInfo = data[DIMM_DDR2_TYPE_INFORMATION]; + DB(mvOsPrintf("DRAM dimmTypeInfo[20] (DDR2) 0x%x\n", + pDimmInfo->dimmTypeInfo)); + } + + /* SDRAM Modules Attributes */ + pDimmInfo->dimmAttributes = data[DIMM_BUF_ADDR_CONT_IN]; + DB(mvOsPrintf("DRAM dimmAttributes[21] 0x%x\n", + pDimmInfo->dimmAttributes)); + + /* Minimum Cycle Time At Max CasLatancy Minus 1*/ + pDimmInfo->minCycleTimeAtMaxCasLatMinus1Ps = + cas2ps(data[DIMM_MIN_CC_AT_MAX_CAS_MINUS1]); + + /* Minimum Cycle Time At Max CasLatancy Minus 2*/ + pDimmInfo->minCycleTimeAtMaxCasLatMinus2Ps = + cas2ps(data[DIMM_MIN_CC_AT_MAX_CAS_MINUS2]); + + pDimmInfo->minRowPrechargeTime = data[DIMM_MIN_ROW_PRECHARGE_TIME]; + DB(mvOsPrintf("DRAM minRowPrechargeTime[27] 0x%x\n", + pDimmInfo->minRowPrechargeTime)); + pDimmInfo->minRowActiveToRowActive = data[DIMM_MIN_ROW_ACTIVE_TO_ROW_ACTIVE]; + DB(mvOsPrintf("DRAM minRowActiveToRowActive[28] 0x%x\n", + pDimmInfo->minRowActiveToRowActive)); + pDimmInfo->minRasToCasDelay = data[DIMM_MIN_RAS_TO_CAS_DELAY]; + DB(mvOsPrintf("DRAM minRasToCasDelay[29] 0x%x\n", + pDimmInfo->minRasToCasDelay)); + pDimmInfo->minRasPulseWidth = data[DIMM_MIN_RAS_PULSE_WIDTH]; + DB(mvOsPrintf("DRAM minRasPulseWidth[30] 0x%x\n", + pDimmInfo->minRasPulseWidth)); + + /* DIMM Bank Density */ + pDimmInfo->dimmBankDensity = data[DIMM_BANK_DENSITY]; + DB(mvOsPrintf("DRAM dimmBankDensity[31] 0x%x\n", + pDimmInfo->dimmBankDensity)); + + /* Only DDR2 includes Write Recovery Time field. Other SDRAM ignore */ + pDimmInfo->minWriteRecoveryTime = data[DIMM_MIN_WRITE_RECOVERY_TIME]; + DB(mvOsPrintf("DRAM minWriteRecoveryTime[36] 0x%x\n", + pDimmInfo->minWriteRecoveryTime)); + + /* Only DDR2 includes Internal Write To Read Command Delay field. */ + pDimmInfo->minWriteToReadCmdDelay = data[DIMM_MIN_WRITE_TO_READ_CMD_DELAY]; + DB(mvOsPrintf("DRAM minWriteToReadCmdDelay[37] 0x%x\n", + pDimmInfo->minWriteToReadCmdDelay)); + + /* Only DDR2 includes Internal Read To Precharge Command Delay field. */ + pDimmInfo->minReadToPrechCmdDelay = data[DIMM_MIN_READ_TO_PRECH_CMD_DELAY]; + DB(mvOsPrintf("DRAM minReadToPrechCmdDelay[38] 0x%x\n", + pDimmInfo->minReadToPrechCmdDelay)); + + /* Only DDR2 includes Minimum Refresh to Activate/Refresh Command field */ + pDimmInfo->minRefreshToActiveCmd = data[DIMM_MIN_REFRESH_TO_ACTIVATE_CMD]; + DB(mvOsPrintf("DRAM minRefreshToActiveCmd[42] 0x%x\n", + pDimmInfo->minRefreshToActiveCmd)); + + /* calculating the sdram density. Representing device density from */ + /* bit 20 to allow representation of 4GB and above. */ + /* For example, if density is 512Mbit 0x20000000, will be represent in */ + /* deviceDensity by 0x20000000 >> 16 --> 0x00000200. Another example */ + /* is density 8GB 0x200000000 >> 16 --> 0x00002000. */ + density = (1 << ((pDimmInfo->numOfRowAddr + pDimmInfo->numOfColAddr) - 20)); + pDimmInfo->deviceDensity = density * + pDimmInfo->numOfBanksOnEachDevice * + pDimmInfo->sdramWidth; + DB(mvOsPrintf("DRAM deviceDensity %d\n",pDimmInfo->deviceDensity)); + + /* Number of devices includeing Error correction */ + pDimmInfo->numberOfDevices = (pDimmInfo->dataWidth/pDimmInfo->sdramWidth) * + pDimmInfo->numOfModuleBanks; + DB(mvOsPrintf("DRAM numberOfDevices %d\n", + pDimmInfo->numberOfDevices)); + + pDimmInfo->size = 0; + + /* Note that pDimmInfo->size is in MB units */ + if (pDimmInfo->memoryType == MEM_TYPE_SDRAM) + { + if (pDimmInfo->dimmBankDensity & BIT0) + pDimmInfo->size += 1024; /* Equal to 1GB */ + else if (pDimmInfo->dimmBankDensity & BIT1) + pDimmInfo->size += 8; /* Equal to 8MB */ + else if (pDimmInfo->dimmBankDensity & BIT2) + pDimmInfo->size += 16; /* Equal to 16MB */ + else if (pDimmInfo->dimmBankDensity & BIT3) + pDimmInfo->size += 32; /* Equal to 32MB */ + else if (pDimmInfo->dimmBankDensity & BIT4) + pDimmInfo->size += 64; /* Equal to 64MB */ + else if (pDimmInfo->dimmBankDensity & BIT5) + pDimmInfo->size += 128; /* Equal to 128MB */ + else if (pDimmInfo->dimmBankDensity & BIT6) + pDimmInfo->size += 256; /* Equal to 256MB */ + else if (pDimmInfo->dimmBankDensity & BIT7) + pDimmInfo->size += 512; /* Equal to 512MB */ + } + else if (pDimmInfo->memoryType == MEM_TYPE_DDR1) + { + if (pDimmInfo->dimmBankDensity & BIT0) + pDimmInfo->size += 1024; /* Equal to 1GB */ + else if (pDimmInfo->dimmBankDensity & BIT1) + pDimmInfo->size += 2048; /* Equal to 2GB */ + else if (pDimmInfo->dimmBankDensity & BIT2) + pDimmInfo->size += 16; /* Equal to 16MB */ + else if (pDimmInfo->dimmBankDensity & BIT3) + pDimmInfo->size += 32; /* Equal to 32MB */ + else if (pDimmInfo->dimmBankDensity & BIT4) + pDimmInfo->size += 64; /* Equal to 64MB */ + else if (pDimmInfo->dimmBankDensity & BIT5) + pDimmInfo->size += 128; /* Equal to 128MB */ + else if (pDimmInfo->dimmBankDensity & BIT6) + pDimmInfo->size += 256; /* Equal to 256MB */ + else if (pDimmInfo->dimmBankDensity & BIT7) + pDimmInfo->size += 512; /* Equal to 512MB */ + } + else /* if (dimmInfo.memoryType == MEM_TYPE_DDR2) */ + { + if (pDimmInfo->dimmBankDensity & BIT0) + pDimmInfo->size += 1024; /* Equal to 1GB */ + else if (pDimmInfo->dimmBankDensity & BIT1) + pDimmInfo->size += 2048; /* Equal to 2GB */ + else if (pDimmInfo->dimmBankDensity & BIT2) + pDimmInfo->size += 4096; /* Equal to 4GB */ + else if (pDimmInfo->dimmBankDensity & BIT3) + pDimmInfo->size += 8192; /* Equal to 8GB */ + else if (pDimmInfo->dimmBankDensity & BIT4) + pDimmInfo->size += 16384; /* Equal to 16GB */ + else if (pDimmInfo->dimmBankDensity & BIT5) + pDimmInfo->size += 128; /* Equal to 128MB */ + else if (pDimmInfo->dimmBankDensity & BIT6) + pDimmInfo->size += 256; /* Equal to 256MB */ + else if (pDimmInfo->dimmBankDensity & BIT7) + pDimmInfo->size += 512; /* Equal to 512MB */ + } + + pDimmInfo->size *= pDimmInfo->numOfModuleBanks; + + DB(mvOsPrintf("Dram: dimm size %dMB \n",pDimmInfo->size)); + + return MV_OK; +} + +/******************************************************************************* +* dimmSpdPrint - Print the SPD parameters. +* +* DESCRIPTION: +* Print the Dimm SPD parameters. +* +* INPUT: +* pDimmInfo - DIMM information structure. +* +* OUTPUT: +* None. +* +* RETURN: +* None. +* +*******************************************************************************/ +MV_VOID dimmSpdPrint(MV_U32 dimmNum) +{ + MV_DIMM_INFO dimmInfo; + MV_U32 i, temp = 0; + MV_U32 k, maskLeftOfPoint = 0, maskRightOfPoint = 0; + MV_U32 rightOfPoint = 0,leftOfPoint = 0, div, time_tmp, shift; + MV_U32 busClkPs; + MV_U8 trp_clocks=0, trcd_clocks, tras_clocks, trrd_clocks, + temp_buf[40], *spdRawData; + + busClkPs = 1000000000 / (mvBoardSysClkGet() / 100); /* in 10 ps units */ + + spdRawData = dimmInfo.spdRawData; + + if(MV_OK != dimmSpdGet(dimmNum, &dimmInfo)) + { + mvOsOutput("ERROR: Could not read SPD information!\n"); + return; + } + + /* find Manufactura of Dimm Module */ + mvOsOutput("\nManufacturer's JEDEC ID Code: "); + for(i = 0 ; i < DIMM_MODULE_MANU_SIZE ; i++) + { + mvOsOutput("%x",spdRawData[DIMM_MODULE_MANU_OFFS + i]); + } + mvOsOutput("\n"); + + /* Manufacturer's Specific Data */ + for(i = 0 ; i < DIMM_MODULE_ID_SIZE ; i++) + { + temp_buf[i] = spdRawData[DIMM_MODULE_ID_OFFS + i]; + } + mvOsOutput("Manufacturer's Specific Data: %s\n", temp_buf); + + /* Module Part Number */ + for(i = 0 ; i < DIMM_MODULE_VEN_SIZE ; i++) + { + temp_buf[i] = spdRawData[DIMM_MODULE_VEN_OFFS + i]; + } + mvOsOutput("Module Part Number: %s\n", temp_buf); + + /* Module Serial Number */ + for(i = 0; i < sizeof(MV_U32); i++) + { + temp |= spdRawData[95+i] << 8*i; + } + mvOsOutput("DIMM Serial No. %ld (%lx)\n", (long)temp, + (long)temp); + + /* find Manufac-Data of Dimm Module */ + mvOsOutput("Manufactoring Date: Year 20%d%d/ ww %d%d\n", + ((spdRawData[93] & 0xf0) >> 4), (spdRawData[93] & 0xf), + ((spdRawData[94] & 0xf0) >> 4), (spdRawData[94] & 0xf)); + /* find modul_revision of Dimm Module */ + mvOsOutput("Module Revision: %d.%d\n", + spdRawData[91], spdRawData[92]); + + /* find manufac_place of Dimm Module */ + mvOsOutput("manufac_place: %d\n", spdRawData[72]); + + /* go over the first 35 I2C data bytes */ + for(i = 2 ; i <= 35 ; i++) + switch(i) + { + case 2: /* Memory type (DDR1/2 / SDRAM) */ + if (dimmInfo.memoryType == MEM_TYPE_SDRAM) + mvOsOutput("Dram Type is: SDRAM\n"); + else if (dimmInfo.memoryType == MEM_TYPE_DDR1) + mvOsOutput("Dram Type is: SDRAM DDR1\n"); + else if (dimmInfo.memoryType == MEM_TYPE_DDR2) + mvOsOutput("Dram Type is: SDRAM DDR2\n"); + else + mvOsOutput("Dram Type unknown\n"); + break; +/*----------------------------------------------------------------------------*/ + + case 3: /* Number Of Row Addresses */ + mvOsOutput("Module Number of row addresses: %d\n", + dimmInfo.numOfRowAddr); + break; +/*----------------------------------------------------------------------------*/ + + case 4: /* Number Of Column Addresses */ + mvOsOutput("Module Number of col addresses: %d\n", + dimmInfo.numOfColAddr); + break; +/*----------------------------------------------------------------------------*/ + + case 5: /* Number Of Module Banks */ + mvOsOutput("Number of Banks on Mod.: %d\n", + dimmInfo.numOfModuleBanks); + break; +/*----------------------------------------------------------------------------*/ + + case 6: /* Data Width */ + mvOsOutput("Module Data Width: %d bit\n", + dimmInfo.dataWidth); + break; +/*----------------------------------------------------------------------------*/ + + case 8: /* Voltage Interface */ + switch(spdRawData[i]) + { + case 0x0: + mvOsOutput("Module is TTL_5V_TOLERANT\n"); + break; + case 0x1: + mvOsOutput("Module is LVTTL\n"); + break; + case 0x2: + mvOsOutput("Module is HSTL_1_5V\n"); + break; + case 0x3: + mvOsOutput("Module is SSTL_3_3V\n"); + break; + case 0x4: + mvOsOutput("Module is SSTL_2_5V\n"); + break; + case 0x5: + if (dimmInfo.memoryType != MEM_TYPE_SDRAM) + { + mvOsOutput("Module is SSTL_1_8V\n"); + break; + } + default: + mvOsOutput("Module is VOLTAGE_UNKNOWN\n"); + break; + } + break; +/*----------------------------------------------------------------------------*/ + + case 9: /* Minimum Cycle Time At Max CasLatancy */ + leftOfPoint = (spdRawData[i] & 0xf0) >> 4; + rightOfPoint = (spdRawData[i] & 0x0f) * 10; + + /* DDR2 addition of right of point */ + if ((spdRawData[i] & 0x0f) == 0xA) + { + rightOfPoint = 25; + } + if ((spdRawData[i] & 0x0f) == 0xB) + { + rightOfPoint = 33; + } + if ((spdRawData[i] & 0x0f) == 0xC) + { + rightOfPoint = 66; + } + if ((spdRawData[i] & 0x0f) == 0xD) + { + rightOfPoint = 75; + } + mvOsOutput("Minimum Cycle Time At Max CL: %d.%d [ns]\n", + leftOfPoint, rightOfPoint); + break; +/*----------------------------------------------------------------------------*/ + + case 10: /* Clock To Data Out */ + div = (dimmInfo.memoryType == MEM_TYPE_SDRAM)? 10:100; + time_tmp = (((spdRawData[i] & 0xf0) >> 4)*10) + + ((spdRawData[i] & 0x0f)); + leftOfPoint = time_tmp / div; + rightOfPoint = time_tmp % div; + mvOsOutput("Clock To Data Out: %d.%d [ns]\n", + leftOfPoint, rightOfPoint); + break; +/*----------------------------------------------------------------------------*/ + + case 11: /* Error Check Type */ + mvOsOutput("Error Check Type (0=NONE): %d\n", + dimmInfo.errorCheckType); + break; +/*----------------------------------------------------------------------------*/ + + case 12: /* Refresh Interval */ + mvOsOutput("Refresh Rate: %x\n", + dimmInfo.refreshInterval); + break; +/*----------------------------------------------------------------------------*/ + + case 13: /* Sdram Width */ + mvOsOutput("Sdram Width: %d bits\n", + dimmInfo.sdramWidth); + break; +/*----------------------------------------------------------------------------*/ + + case 14: /* Error Check Data Width */ + mvOsOutput("Error Check Data Width: %d bits\n", + dimmInfo.errorCheckDataWidth); + break; +/*----------------------------------------------------------------------------*/ + + case 15: /* Minimum Clock Delay is unsupported */ + if ((dimmInfo.memoryType == MEM_TYPE_SDRAM) || + (dimmInfo.memoryType == MEM_TYPE_DDR1)) + { + mvOsOutput("Minimum Clk Delay back to back: %d\n", + spdRawData[i]); + } + break; +/*----------------------------------------------------------------------------*/ + + case 16: /* Burst Length Supported */ + /* SDRAM/DDR1: + *******-******-******-******-******-******-******-******* + * bit7 | bit6 | bit5 | bit4 | bit3 | bit2 | bit1 | bit0 * + *******-******-******-******-******-******-******-******* + burst length = * Page | TBD | TBD | TBD | 8 | 4 | 2 | 1 * + *********************************************************/ + /* DDR2: + *******-******-******-******-******-******-******-******* + * bit7 | bit6 | bit5 | bit4 | bit3 | bit2 | bit1 | bit0 * + *******-******-******-******-******-******-******-******* + burst length = * Page | TBD | TBD | TBD | 8 | 4 | TBD | TBD * + *********************************************************/ + mvOsOutput("Burst Length Supported: "); + if ((dimmInfo.memoryType == MEM_TYPE_SDRAM) || + (dimmInfo.memoryType == MEM_TYPE_DDR1)) + { + if (dimmInfo.burstLengthSupported & BIT0) + mvOsOutput("1, "); + if (dimmInfo.burstLengthSupported & BIT1) + mvOsOutput("2, "); + } + if (dimmInfo.burstLengthSupported & BIT2) + mvOsOutput("4, "); + if (dimmInfo.burstLengthSupported & BIT3) + mvOsOutput("8, "); + + mvOsOutput(" Bit \n"); + break; +/*----------------------------------------------------------------------------*/ + + case 17: /* Number Of Banks On Each Device */ + mvOsOutput("Number Of Banks On Each Chip: %d\n", + dimmInfo.numOfBanksOnEachDevice); + break; +/*----------------------------------------------------------------------------*/ + + case 18: /* Suported Cas Latencies */ + + /* SDRAM: + *******-******-******-******-******-******-******-******* + * bit7 | bit6 | bit5 | bit4 | bit3 | bit2 | bit1 | bit0 * + *******-******-******-******-******-******-******-******* + CAS = * TBD | 7 | 6 | 5 | 4 | 3 | 2 | 1 * + ********************************************************/ + + /* DDR 1: + *******-******-******-******-******-******-******-******* + * bit7 | bit6 | bit5 | bit4 | bit3 | bit2 | bit1 | bit0 * + *******-******-******-******-******-******-******-******* + CAS = * TBD | 4 | 3.5 | 3 | 2.5 | 2 | 1.5 | 1 * + *********************************************************/ + + /* DDR 2: + *******-******-******-******-******-******-******-******* + * bit7 | bit6 | bit5 | bit4 | bit3 | bit2 | bit1 | bit0 * + *******-******-******-******-******-******-******-******* + CAS = * TBD | TBD | 5 | 4 | 3 | 2 | TBD | TBD * + *********************************************************/ + + mvOsOutput("Suported Cas Latencies: (CL) "); + if (dimmInfo.memoryType == MEM_TYPE_SDRAM) + { + for (k = 0; k <=7; k++) + { + if (dimmInfo.suportedCasLatencies & (1 << k)) + mvOsOutput("%d, ", k+1); + } + } + else if (dimmInfo.memoryType == MEM_TYPE_DDR1) + { + if (dimmInfo.suportedCasLatencies & BIT0) + mvOsOutput("1, "); + if (dimmInfo.suportedCasLatencies & BIT1) + mvOsOutput("1.5, "); + if (dimmInfo.suportedCasLatencies & BIT2) + mvOsOutput("2, "); + if (dimmInfo.suportedCasLatencies & BIT3) + mvOsOutput("2.5, "); + if (dimmInfo.suportedCasLatencies & BIT4) + mvOsOutput("3, "); + if (dimmInfo.suportedCasLatencies & BIT5) + mvOsOutput("3.5, "); + } + else if (dimmInfo.memoryType == MEM_TYPE_DDR2) + { + if (dimmInfo.suportedCasLatencies & BIT2) + mvOsOutput("2, "); + if (dimmInfo.suportedCasLatencies & BIT3) + mvOsOutput("3, "); + if (dimmInfo.suportedCasLatencies & BIT4) + mvOsOutput("4, "); + if (dimmInfo.suportedCasLatencies & BIT5) + mvOsOutput("5, "); + } + else + mvOsOutput("?.?, "); + mvOsOutput("\n"); + break; +/*----------------------------------------------------------------------------*/ + + case 20: /* DDR2 DIMM type info */ + if (dimmInfo.memoryType == MEM_TYPE_DDR2) + { + if (dimmInfo.dimmTypeInfo & (BIT0 | BIT4)) + mvOsOutput("Registered DIMM (RDIMM)\n"); + else if (dimmInfo.dimmTypeInfo & (BIT1 | BIT5)) + mvOsOutput("Unbuffered DIMM (UDIMM)\n"); + else + mvOsOutput("Unknown DIMM type.\n"); + } + + break; +/*----------------------------------------------------------------------------*/ + + case 21: /* SDRAM Modules Attributes */ + mvOsOutput("\nModule Attributes (SPD Byte 21): \n"); + + if (dimmInfo.memoryType == MEM_TYPE_SDRAM) + { + if (dimmInfo.dimmAttributes & BIT0) + mvOsOutput(" Buffered Addr/Control Input: Yes\n"); + else + mvOsOutput(" Buffered Addr/Control Input: No\n"); + + if (dimmInfo.dimmAttributes & BIT1) + mvOsOutput(" Registered Addr/Control Input: Yes\n"); + else + mvOsOutput(" Registered Addr/Control Input: No\n"); + + if (dimmInfo.dimmAttributes & BIT2) + mvOsOutput(" On-Card PLL (clock): Yes \n"); + else + mvOsOutput(" On-Card PLL (clock): No \n"); + + if (dimmInfo.dimmAttributes & BIT3) + mvOsOutput(" Bufferd DQMB Input: Yes \n"); + else + mvOsOutput(" Bufferd DQMB Inputs: No \n"); + + if (dimmInfo.dimmAttributes & BIT4) + mvOsOutput(" Registered DQMB Inputs: Yes \n"); + else + mvOsOutput(" Registered DQMB Inputs: No \n"); + + if (dimmInfo.dimmAttributes & BIT5) + mvOsOutput(" Differential Clock Input: Yes \n"); + else + mvOsOutput(" Differential Clock Input: No \n"); + + if (dimmInfo.dimmAttributes & BIT6) + mvOsOutput(" redundant Row Addressing: Yes \n"); + else + mvOsOutput(" redundant Row Addressing: No \n"); + } + else if (dimmInfo.memoryType == MEM_TYPE_DDR1) + { + if (dimmInfo.dimmAttributes & BIT0) + mvOsOutput(" Buffered Addr/Control Input: Yes\n"); + else + mvOsOutput(" Buffered Addr/Control Input: No\n"); + + if (dimmInfo.dimmAttributes & BIT1) + mvOsOutput(" Registered Addr/Control Input: Yes\n"); + else + mvOsOutput(" Registered Addr/Control Input: No\n"); + + if (dimmInfo.dimmAttributes & BIT2) + mvOsOutput(" On-Card PLL (clock): Yes \n"); + else + mvOsOutput(" On-Card PLL (clock): No \n"); + + if (dimmInfo.dimmAttributes & BIT3) + mvOsOutput(" FET Switch On-Card Enabled: Yes \n"); + else + mvOsOutput(" FET Switch On-Card Enabled: No \n"); + + if (dimmInfo.dimmAttributes & BIT4) + mvOsOutput(" FET Switch External Enabled: Yes \n"); + else + mvOsOutput(" FET Switch External Enabled: No \n"); + + if (dimmInfo.dimmAttributes & BIT5) + mvOsOutput(" Differential Clock Input: Yes \n"); + else + mvOsOutput(" Differential Clock Input: No \n"); + } + else /* if (dimmInfo.memoryType == MEM_TYPE_DDR2) */ + { + mvOsOutput(" Number of Active Registers on the DIMM: %d\n", + (dimmInfo.dimmAttributes & 0x3) + 1); + + mvOsOutput(" Number of PLLs on the DIMM: %d\n", + ((dimmInfo.dimmAttributes) >> 2) & 0x3); + + if (dimmInfo.dimmAttributes & BIT4) + mvOsOutput(" FET Switch External Enabled: Yes \n"); + else + mvOsOutput(" FET Switch External Enabled: No \n"); + + if (dimmInfo.dimmAttributes & BIT6) + mvOsOutput(" Analysis probe installed: Yes \n"); + else + mvOsOutput(" Analysis probe installed: No \n"); + } + + break; +/*----------------------------------------------------------------------------*/ + + case 22: /* Suported AutoPreCharge */ + mvOsOutput("\nModul Attributes (SPD Byte 22): \n"); + if (dimmInfo.memoryType == MEM_TYPE_SDRAM) + { + if ( spdRawData[i] & BIT0 ) + mvOsOutput(" Early Ras Precharge: Yes \n"); + else + mvOsOutput(" Early Ras Precharge: No \n"); + + if ( spdRawData[i] & BIT1 ) + mvOsOutput(" AutoPreCharge: Yes \n"); + else + mvOsOutput(" AutoPreCharge: No \n"); + + if ( spdRawData[i] & BIT2 ) + mvOsOutput(" Precharge All: Yes \n"); + else + mvOsOutput(" Precharge All: No \n"); + + if ( spdRawData[i] & BIT3 ) + mvOsOutput(" Write 1/ReadBurst: Yes \n"); + else + mvOsOutput(" Write 1/ReadBurst: No \n"); + + if ( spdRawData[i] & BIT4 ) + mvOsOutput(" lower VCC tolerance: 5%%\n"); + else + mvOsOutput(" lower VCC tolerance: 10%%\n"); + + if ( spdRawData[i] & BIT5 ) + mvOsOutput(" upper VCC tolerance: 5%%\n"); + else + mvOsOutput(" upper VCC tolerance: 10%%\n"); + } + else if (dimmInfo.memoryType == MEM_TYPE_DDR1) + { + if ( spdRawData[i] & BIT0 ) + mvOsOutput(" Supports Weak Driver: Yes \n"); + else + mvOsOutput(" Supports Weak Driver: No \n"); + + if ( !(spdRawData[i] & BIT4) ) + mvOsOutput(" lower VCC tolerance: 0.2V\n"); + + if ( !(spdRawData[i] & BIT5) ) + mvOsOutput(" upper VCC tolerance: 0.2V\n"); + + if ( spdRawData[i] & BIT6 ) + mvOsOutput(" Concurrent Auto Preharge: Yes \n"); + else + mvOsOutput(" Concurrent Auto Preharge: No \n"); + + if ( spdRawData[i] & BIT7 ) + mvOsOutput(" Supports Fast AP: Yes \n"); + else + mvOsOutput(" Supports Fast AP: No \n"); + } + else if (dimmInfo.memoryType == MEM_TYPE_DDR2) + { + if ( spdRawData[i] & BIT0 ) + mvOsOutput(" Supports Weak Driver: Yes \n"); + else + mvOsOutput(" Supports Weak Driver: No \n"); + } + break; +/*----------------------------------------------------------------------------*/ + + case 23: + /* Minimum Cycle Time At Maximum Cas Latancy Minus 1 (2nd highest CL) */ + leftOfPoint = (spdRawData[i] & 0xf0) >> 4; + rightOfPoint = (spdRawData[i] & 0x0f) * 10; + + /* DDR2 addition of right of point */ + if ((spdRawData[i] & 0x0f) == 0xA) + { + rightOfPoint = 25; + } + if ((spdRawData[i] & 0x0f) == 0xB) + { + rightOfPoint = 33; + } + if ((spdRawData[i] & 0x0f) == 0xC) + { + rightOfPoint = 66; + } + if ((spdRawData[i] & 0x0f) == 0xD) + { + rightOfPoint = 75; + } + + mvOsOutput("Minimum Cycle Time At 2nd highest CasLatancy" + "(0 = Not supported): %d.%d [ns]\n", + leftOfPoint, rightOfPoint ); + break; +/*----------------------------------------------------------------------------*/ + + case 24: /* Clock To Data Out 2nd highest Cas Latency Value*/ + div = (dimmInfo.memoryType == MEM_TYPE_SDRAM) ? 10:100; + time_tmp = (((spdRawData[i] & 0xf0) >> 4)*10) + + ((spdRawData[i] & 0x0f)); + leftOfPoint = time_tmp / div; + rightOfPoint = time_tmp % div; + mvOsOutput("Clock To Data Out (2nd CL value): %d.%d [ns]\n", + leftOfPoint, rightOfPoint); + break; +/*----------------------------------------------------------------------------*/ + + case 25: + /* Minimum Cycle Time At Maximum Cas Latancy Minus 2 (3rd highest CL) */ + if (dimmInfo.memoryType == MEM_TYPE_SDRAM) + { + leftOfPoint = (spdRawData[i] & 0xfc) >> 2; + rightOfPoint = (spdRawData[i] & 0x3) * 25; + } + else /* DDR1 or DDR2 */ + { + leftOfPoint = (spdRawData[i] & 0xf0) >> 4; + rightOfPoint = (spdRawData[i] & 0x0f) * 10; + + /* DDR2 addition of right of point */ + if ((spdRawData[i] & 0x0f) == 0xA) + { + rightOfPoint = 25; + } + if ((spdRawData[i] & 0x0f) == 0xB) + { + rightOfPoint = 33; + } + if ((spdRawData[i] & 0x0f) == 0xC) + { + rightOfPoint = 66; + } + if ((spdRawData[i] & 0x0f) == 0xD) + { + rightOfPoint = 75; + } + } + mvOsOutput("Minimum Cycle Time At 3rd highest CasLatancy" + "(0 = Not supported): %d.%d [ns]\n", + leftOfPoint, rightOfPoint ); + break; +/*----------------------------------------------------------------------------*/ + + case 26: /* Clock To Data Out 3rd highest Cas Latency Value*/ + if (dimmInfo.memoryType == MEM_TYPE_SDRAM) + { + leftOfPoint = (spdRawData[i] & 0xfc) >> 2; + rightOfPoint = (spdRawData[i] & 0x3) * 25; + } + else /* DDR1 or DDR2 */ + { + time_tmp = (((spdRawData[i] & 0xf0) >> 4)*10) + + ((spdRawData[i] & 0x0f)); + leftOfPoint = 0; + rightOfPoint = time_tmp; + } + mvOsOutput("Clock To Data Out (3rd CL value): %d.%2d[ns]\n", + leftOfPoint, rightOfPoint ); + break; +/*----------------------------------------------------------------------------*/ + + case 27: /* Minimum Row Precharge Time */ + shift = (dimmInfo.memoryType == MEM_TYPE_SDRAM)? 0:2; + maskLeftOfPoint = (dimmInfo.memoryType == MEM_TYPE_SDRAM) ? + 0xff : 0xfc; + maskRightOfPoint = (dimmInfo.memoryType == MEM_TYPE_SDRAM) ? + 0x00 : 0x03; + leftOfPoint = ((spdRawData[i] & maskLeftOfPoint) >> shift); + rightOfPoint = (spdRawData[i] & maskRightOfPoint)*25; + temp = ((leftOfPoint*100) + rightOfPoint);/* in 10ps Intervals*/ + trp_clocks = (temp + (busClkPs-1)) / busClkPs; + mvOsOutput("Minimum Row Precharge Time [ns]: %d.%d = " + "in Clk cycles %d\n", + leftOfPoint, rightOfPoint, trp_clocks); + break; +/*----------------------------------------------------------------------------*/ + + case 28: /* Minimum Row Active to Row Active Time */ + shift = (dimmInfo.memoryType == MEM_TYPE_SDRAM)? 0:2; + maskLeftOfPoint = (dimmInfo.memoryType == MEM_TYPE_SDRAM) ? + 0xff : 0xfc; + maskRightOfPoint = (dimmInfo.memoryType == MEM_TYPE_SDRAM) ? + 0x00 : 0x03; + leftOfPoint = ((spdRawData[i] & maskLeftOfPoint) >> shift); + rightOfPoint = (spdRawData[i] & maskRightOfPoint)*25; + temp = ((leftOfPoint*100) + rightOfPoint);/* in 100ns Interval*/ + trrd_clocks = (temp + (busClkPs-1)) / busClkPs; + mvOsOutput("Minimum Row Active -To- Row Active Delay [ns]: " + "%d.%d = in Clk cycles %d\n", + leftOfPoint, rightOfPoint, trp_clocks); + break; +/*----------------------------------------------------------------------------*/ + + case 29: /* Minimum Ras-To-Cas Delay */ + shift = (dimmInfo.memoryType == MEM_TYPE_SDRAM)? 0:2; + maskLeftOfPoint = (dimmInfo.memoryType == MEM_TYPE_SDRAM) ? + 0xff : 0xfc; + maskRightOfPoint = (dimmInfo.memoryType == MEM_TYPE_SDRAM) ? + 0x00 : 0x03; + leftOfPoint = ((spdRawData[i] & maskLeftOfPoint) >> shift); + rightOfPoint = (spdRawData[i] & maskRightOfPoint)*25; + temp = ((leftOfPoint*100) + rightOfPoint);/* in 100ns Interval*/ + trcd_clocks = (temp + (busClkPs-1) )/ busClkPs; + mvOsOutput("Minimum Ras-To-Cas Delay [ns]: %d.%d = " + "in Clk cycles %d\n", + leftOfPoint, rightOfPoint, trp_clocks); + break; +/*----------------------------------------------------------------------------*/ + + case 30: /* Minimum Ras Pulse Width */ + tras_clocks = (cas2ps(spdRawData[i])+(busClkPs-1)) / busClkPs; + mvOsOutput("Minimum Ras Pulse Width [ns]: %d = " + "in Clk cycles %d\n", spdRawData[i], tras_clocks); + break; +/*----------------------------------------------------------------------------*/ + + case 31: /* Module Bank Density */ + mvOsOutput("Module Bank Density (more than 1= Multisize-Module):"); + + if (dimmInfo.memoryType == MEM_TYPE_SDRAM) + { + if (dimmInfo.dimmBankDensity & BIT0) + mvOsOutput("1GB, "); + if (dimmInfo.dimmBankDensity & BIT1) + mvOsOutput("8MB, "); + if (dimmInfo.dimmBankDensity & BIT2) + mvOsOutput("16MB, "); + if (dimmInfo.dimmBankDensity & BIT3) + mvOsOutput("32MB, "); + if (dimmInfo.dimmBankDensity & BIT4) + mvOsOutput("64MB, "); + if (dimmInfo.dimmBankDensity & BIT5) + mvOsOutput("128MB, "); + if (dimmInfo.dimmBankDensity & BIT6) + mvOsOutput("256MB, "); + if (dimmInfo.dimmBankDensity & BIT7) + mvOsOutput("512MB, "); + } + else if (dimmInfo.memoryType == MEM_TYPE_DDR1) + { + if (dimmInfo.dimmBankDensity & BIT0) + mvOsOutput("1GB, "); + if (dimmInfo.dimmBankDensity & BIT1) + mvOsOutput("2GB, "); + if (dimmInfo.dimmBankDensity & BIT2) + mvOsOutput("16MB, "); + if (dimmInfo.dimmBankDensity & BIT3) + mvOsOutput("32MB, "); + if (dimmInfo.dimmBankDensity & BIT4) + mvOsOutput("64MB, "); + if (dimmInfo.dimmBankDensity & BIT5) + mvOsOutput("128MB, "); + if (dimmInfo.dimmBankDensity & BIT6) + mvOsOutput("256MB, "); + if (dimmInfo.dimmBankDensity & BIT7) + mvOsOutput("512MB, "); + } + else /* if (dimmInfo.memoryType == MEM_TYPE_DDR2) */ + { + if (dimmInfo.dimmBankDensity & BIT0) + mvOsOutput("1GB, "); + if (dimmInfo.dimmBankDensity & BIT1) + mvOsOutput("2GB, "); + if (dimmInfo.dimmBankDensity & BIT2) + mvOsOutput("4GB, "); + if (dimmInfo.dimmBankDensity & BIT3) + mvOsOutput("8GB, "); + if (dimmInfo.dimmBankDensity & BIT4) + mvOsOutput("16GB, "); + if (dimmInfo.dimmBankDensity & BIT5) + mvOsOutput("128MB, "); + if (dimmInfo.dimmBankDensity & BIT6) + mvOsOutput("256MB, "); + if (dimmInfo.dimmBankDensity & BIT7) + mvOsOutput("512MB, "); + } + mvOsOutput("\n"); + break; +/*----------------------------------------------------------------------------*/ + + case 32: /* Address And Command Setup Time (measured in ns/1000) */ + if (dimmInfo.memoryType == MEM_TYPE_SDRAM) + { + rightOfPoint = (spdRawData[i] & 0x0f); + leftOfPoint = (spdRawData[i] & 0xf0) >> 4; + if(leftOfPoint > 7) + { + leftOfPoint *= -1; + } + } + else /* DDR1 or DDR2 */ + { + time_tmp = (((spdRawData[i] & 0xf0) >> 4)*10) + + ((spdRawData[i] & 0x0f)); + leftOfPoint = time_tmp / 100; + rightOfPoint = time_tmp % 100; + } + mvOsOutput("Address And Command Setup Time [ns]: %d.%d\n", + leftOfPoint, rightOfPoint); + break; +/*----------------------------------------------------------------------------*/ + + case 33: /* Address And Command Hold Time */ + if (dimmInfo.memoryType == MEM_TYPE_SDRAM) + { + rightOfPoint = (spdRawData[i] & 0x0f); + leftOfPoint = (spdRawData[i] & 0xf0) >> 4; + if(leftOfPoint > 7) + { + leftOfPoint *= -1; + } + } + else /* DDR1 or DDR2 */ + { + time_tmp = (((spdRawData[i] & 0xf0) >> 4)*10) + + ((spdRawData[i] & 0x0f)); + leftOfPoint = time_tmp / 100; + rightOfPoint = time_tmp % 100; + } + mvOsOutput("Address And Command Hold Time [ns]: %d.%d\n", + leftOfPoint, rightOfPoint); + break; +/*----------------------------------------------------------------------------*/ + + case 34: /* Data Input Setup Time */ + if (dimmInfo.memoryType == MEM_TYPE_SDRAM) + { + rightOfPoint = (spdRawData[i] & 0x0f); + leftOfPoint = (spdRawData[i] & 0xf0) >> 4; + if(leftOfPoint > 7) + { + leftOfPoint *= -1; + } + } + else /* DDR1 or DDR2 */ + { + time_tmp = (((spdRawData[i] & 0xf0) >> 4)*10) + + ((spdRawData[i] & 0x0f)); + leftOfPoint = time_tmp / 100; + rightOfPoint = time_tmp % 100; + } + mvOsOutput("Data Input Setup Time [ns]: %d.%d\n", + leftOfPoint, rightOfPoint); + break; +/*----------------------------------------------------------------------------*/ + + case 35: /* Data Input Hold Time */ + if (dimmInfo.memoryType == MEM_TYPE_SDRAM) + { + rightOfPoint = (spdRawData[i] & 0x0f); + leftOfPoint = (spdRawData[i] & 0xf0) >> 4; + if(leftOfPoint > 7) + { + leftOfPoint *= -1; + } + } + else /* DDR1 or DDR2 */ + { + time_tmp = (((spdRawData[i] & 0xf0) >> 4)*10) + + ((spdRawData[i] & 0x0f)); + leftOfPoint = time_tmp / 100; + rightOfPoint = time_tmp % 100; + } + mvOsOutput("Data Input Hold Time [ns]: %d.%d\n\n", + leftOfPoint, rightOfPoint); + break; +/*----------------------------------------------------------------------------*/ + + case 36: /* Relevant for DDR2 only: Write Recovery Time */ + leftOfPoint = ((spdRawData[i] & maskLeftOfPoint) >> 2); + rightOfPoint = (spdRawData[i] & maskRightOfPoint) * 25; + mvOsOutput("Write Recovery Time [ns]: %d.%d\n", + leftOfPoint, rightOfPoint); + break; +/*----------------------------------------------------------------------------*/ + } + +} + + +/* + * translate ns.ns/10 coding of SPD timing values + * into ps unit values + */ +/******************************************************************************* +* cas2ps - Translate x.y ns parameter to pico-seconds values +* +* DESCRIPTION: +* This function translates x.y nano seconds to its value in pico seconds. +* For example 3.75ns will return 3750. +* +* INPUT: +* spd_byte - DIMM SPD byte. +* +* OUTPUT: +* None. +* +* RETURN: +* value in pico seconds. +* +*******************************************************************************/ +static MV_U32 cas2ps(MV_U8 spd_byte) +{ + MV_U32 ns, ns10; + + /* isolate upper nibble */ + ns = (spd_byte >> 4) & 0x0F; + /* isolate lower nibble */ + ns10 = (spd_byte & 0x0F); + + if( ns10 < 10 ) { + ns10 *= 10; + } + else if( ns10 == 10 ) + ns10 = 25; + else if( ns10 == 11 ) + ns10 = 33; + else if( ns10 == 12 ) + ns10 = 66; + else if( ns10 == 13 ) + ns10 = 75; + else + { + mvOsOutput("cas2ps Err. unsupported cycle time.\n"); + } + + return (ns*1000 + ns10*10); +} + diff --git a/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/mv_hal/ddr1_2/mvDram.h b/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/mv_hal/ddr1_2/mvDram.h new file mode 100644 index 0000000000..678e22456d --- /dev/null +++ b/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/mv_hal/ddr1_2/mvDram.h @@ -0,0 +1,191 @@ +/******************************************************************************* +Copyright (C) Marvell International Ltd. and its affiliates + +This software file (the "File") is owned and distributed by Marvell +International Ltd. and/or its affiliates ("Marvell") under the following +alternative licensing terms. Once you have made an election to distribute the +File under one of the following license alternatives, please (i) delete this +introductory statement regarding license alternatives, (ii) delete the two +license alternatives that you have not elected to use and (iii) preserve the +Marvell copyright notice above. + +******************************************************************************** +Marvell Commercial License Option + +If you received this File from Marvell and you have entered into a commercial +license agreement (a "Commercial License") with Marvell, the File is licensed +to you under the terms of the applicable Commercial License. + +******************************************************************************** +Marvell GPL License Option + +If you received this File from Marvell, you may opt to use, redistribute and/or +modify this File in accordance with the terms and conditions of the General +Public License Version 2, June 1991 (the "GPL License"), a copy of which is +available along with the File in the license.txt file or by writing to the Free +Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or +on the worldwide web at http://www.gnu.org/licenses/gpl.txt. + +THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED +WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY +DISCLAIMED. The GPL License provides additional details about this warranty +disclaimer. +******************************************************************************** +Marvell BSD License Option + +If you received this File from Marvell, you may opt to use, redistribute and/or +modify this File under the following licensing terms. +Redistribution and use in source and binary forms, with or without modification, +are permitted provided that the following conditions are met: + + * Redistributions of source code must retain the above copyright notice, + this list of conditions and the following disclaimer. + + * Redistributions in binary form must reproduce the above copyright + notice, this list of conditions and the following disclaimer in the + documentation and/or other materials provided with the distribution. + + * Neither the name of Marvell nor the names of its contributors may be + used to endorse or promote products derived from this software without + specific prior written permission. + +THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND +ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED +WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE +DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR +ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES +(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; +LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON +ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS +SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + +*******************************************************************************/ + +#ifndef __INCmvDram +#define __INCmvDram + +#include "ddr1_2/mvDramIf.h" +#include "twsi/mvTwsi.h" + +#define MAX_DIMM_NUM 2 +#define SPD_SIZE 128 + +/* Dimm spd offsets */ +#define DIMM_MEM_TYPE 2 +#define DIMM_ROW_NUM 3 +#define DIMM_COL_NUM 4 +#define DIMM_MODULE_BANK_NUM 5 +#define DIMM_DATA_WIDTH 6 +#define DIMM_VOLT_IF 8 +#define DIMM_MIN_CC_AT_MAX_CAS 9 +#define DIMM_ERR_CHECK_TYPE 11 +#define DIMM_REFRESH_INTERVAL 12 +#define DIMM_SDRAM_WIDTH 13 +#define DIMM_ERR_CHECK_DATA_WIDTH 14 +#define DIMM_MIN_CLK_DEL 15 +#define DIMM_BURST_LEN_SUP 16 +#define DIMM_DEV_BANK_NUM 17 +#define DIMM_SUP_CAL 18 +#define DIMM_DDR2_TYPE_INFORMATION 20 /* DDR2 only */ +#define DIMM_BUF_ADDR_CONT_IN 21 +#define DIMM_MIN_CC_AT_MAX_CAS_MINUS1 23 +#define DIMM_MIN_CC_AT_MAX_CAS_MINUS2 25 +#define DIMM_MIN_ROW_PRECHARGE_TIME 27 +#define DIMM_MIN_ROW_ACTIVE_TO_ROW_ACTIVE 28 +#define DIMM_MIN_RAS_TO_CAS_DELAY 29 +#define DIMM_MIN_RAS_PULSE_WIDTH 30 +#define DIMM_BANK_DENSITY 31 +#define DIMM_MIN_WRITE_RECOVERY_TIME 36 +#define DIMM_MIN_WRITE_TO_READ_CMD_DELAY 37 +#define DIMM_MIN_READ_TO_PRECH_CMD_DELAY 38 +#define DIMM_MIN_REFRESH_TO_ACTIVATE_CMD 42 + +/* Dimm Memory Type values */ +#define DIMM_MEM_TYPE_SDRAM 0x4 +#define DIMM_MEM_TYPE_DDR1 0x7 +#define DIMM_MEM_TYPE_DDR2 0x8 + +#define DIMM_MODULE_MANU_OFFS 64 +#define DIMM_MODULE_MANU_SIZE 8 +#define DIMM_MODULE_VEN_OFFS 73 +#define DIMM_MODULE_VEN_SIZE 25 +#define DIMM_MODULE_ID_OFFS 99 +#define DIMM_MODULE_ID_SIZE 18 + +/* enumeration for voltage levels. */ +typedef enum _mvDimmVoltageIf +{ + TTL_5V_TOLERANT, + LVTTL, + HSTL_1_5V, + SSTL_3_3V, + SSTL_2_5V, + VOLTAGE_UNKNOWN, +} MV_DIMM_VOLTAGE_IF; + + +/* enumaration for SDRAM CAS Latencies. */ +typedef enum _mvDimmSdramCas +{ + SD_CL_1 =1, + SD_CL_2, + SD_CL_3, + SD_CL_4, + SD_CL_5, + SD_CL_6, + SD_CL_7, + SD_FAULT +}MV_DIMM_SDRAM_CAS; + + +/* DIMM information structure */ +typedef struct _mvDimmInfo +{ + MV_MEMORY_TYPE memoryType; /* DDR or SDRAM */ + + MV_U8 spdRawData[SPD_SIZE]; /* Content of SPD-EEPROM copied 1:1 */ + + /* DIMM dimensions */ + MV_U32 numOfRowAddr; + MV_U32 numOfColAddr; + MV_U32 numOfModuleBanks; + MV_U32 dataWidth; + MV_U32 errorCheckType; /* ECC , PARITY..*/ + MV_U32 sdramWidth; /* 4,8,16 or 32 */ + MV_U32 errorCheckDataWidth; /* 0 - no, 1 - Yes */ + MV_U32 burstLengthSupported; + MV_U32 numOfBanksOnEachDevice; + MV_U32 suportedCasLatencies; + MV_U32 refreshInterval; + MV_U32 dimmBankDensity; + MV_U32 dimmTypeInfo; /* DDR2 only */ + MV_U32 dimmAttributes; + + /* DIMM timing parameters */ + MV_U32 minCycleTimeAtMaxCasLatPs; + MV_U32 minCycleTimeAtMaxCasLatMinus1Ps; + MV_U32 minCycleTimeAtMaxCasLatMinus2Ps; + MV_U32 minRowPrechargeTime; + MV_U32 minRowActiveToRowActive; + MV_U32 minRasToCasDelay; + MV_U32 minRasPulseWidth; + MV_U32 minWriteRecoveryTime; /* DDR2 only */ + MV_U32 minWriteToReadCmdDelay; /* DDR2 only */ + MV_U32 minReadToPrechCmdDelay; /* DDR2 only */ + MV_U32 minRefreshToActiveCmd; /* DDR2 only */ + + /* Parameters calculated from the extracted DIMM information */ + MV_U32 size; /* 16,64,128,256 or 512 MByte in MB units */ + MV_U32 deviceDensity; /* 16,64,128,256 or 512 Mbit in MB units */ + MV_U32 numberOfDevices; + +} MV_DIMM_INFO; + + +MV_STATUS mvDramBankInfoGet(MV_U32 bankNum, MV_DRAM_BANK_INFO *pBankInfo); +MV_STATUS dimmSpdGet(MV_U32 dimmNum, MV_DIMM_INFO *pDimmInfo); +MV_VOID dimmSpdPrint(MV_U32 dimmNum); +MV_STATUS dimmSpdCpy(MV_VOID); + +#endif /* __INCmvDram */ diff --git a/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/mv_hal/ddr1_2/mvDramIf.c b/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/mv_hal/ddr1_2/mvDramIf.c new file mode 100644 index 0000000000..12fb26ad0e --- /dev/null +++ b/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/mv_hal/ddr1_2/mvDramIf.c @@ -0,0 +1,1599 @@ +/******************************************************************************* +Copyright (C) Marvell International Ltd. and its affiliates + +This software file (the "File") is owned and distributed by Marvell +International Ltd. and/or its affiliates ("Marvell") under the following +alternative licensing terms. Once you have made an election to distribute the +File under one of the following license alternatives, please (i) delete this +introductory statement regarding license alternatives, (ii) delete the two +license alternatives that you have not elected to use and (iii) preserve the +Marvell copyright notice above. + +******************************************************************************** +Marvell Commercial License Option + +If you received this File from Marvell and you have entered into a commercial +license agreement (a "Commercial License") with Marvell, the File is licensed +to you under the terms of the applicable Commercial License. + +******************************************************************************** +Marvell GPL License Option + +If you received this File from Marvell, you may opt to use, redistribute and/or +modify this File in accordance with the terms and conditions of the General +Public License Version 2, June 1991 (the "GPL License"), a copy of which is +available along with the File in the license.txt file or by writing to the Free +Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or +on the worldwide web at http://www.gnu.org/licenses/gpl.txt. + +THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED +WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY +DISCLAIMED. The GPL License provides additional details about this warranty +disclaimer. +******************************************************************************** +Marvell BSD License Option + +If you received this File from Marvell, you may opt to use, redistribute and/or +modify this File under the following licensing terms. +Redistribution and use in source and binary forms, with or without modification, +are permitted provided that the following conditions are met: + + * Redistributions of source code must retain the above copyright notice, + this list of conditions and the following disclaimer. + + * Redistributions in binary form must reproduce the above copyright + notice, this list of conditions and the following disclaimer in the + documentation and/or other materials provided with the distribution. + + * Neither the name of Marvell nor the names of its contributors may be + used to endorse or promote products derived from this software without + specific prior written permission. + +THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND +ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED +WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE +DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR +ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES +(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; +LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON +ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS +SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + +*******************************************************************************/ + + +/* includes */ +#include "ddr1_2/mvDramIf.h" +#include "ctrlEnv/sys/mvCpuIf.h" + + + +#ifdef MV_DEBUG +#define DB(x) x +#else +#define DB(x) +#endif + +/* DRAM bank presence encoding */ +#define BANK_PRESENT_CS0 0x1 +#define BANK_PRESENT_CS0_CS1 0x3 +#define BANK_PRESENT_CS0_CS2 0x5 +#define BANK_PRESENT_CS0_CS1_CS2 0x7 +#define BANK_PRESENT_CS0_CS2_CS3 0xd +#define BANK_PRESENT_CS0_CS2_CS3_CS4 0xf + +/* locals */ +static MV_BOOL sdramIfWinOverlap(MV_TARGET target, MV_ADDR_WIN *pAddrWin); +#if defined(MV_INC_BOARD_DDIM) +static void sdramDDr2OdtConfig(MV_DRAM_BANK_INFO *pBankInfo); +static MV_U32 dunitCtrlLowRegCalc(MV_DRAM_BANK_INFO *pBankInfo, MV_U32 minCas); +static MV_U32 sdramModeRegCalc(MV_U32 minCas); +static MV_U32 sdramExtModeRegCalc(MV_DRAM_BANK_INFO *pBankInfo); +static MV_U32 sdramAddrCtrlRegCalc(MV_DRAM_BANK_INFO *pBankInfo); +static MV_U32 sdramConfigRegCalc(MV_DRAM_BANK_INFO *pBankInfo, MV_U32 busClk); +static MV_U32 minCasCalc(MV_DRAM_BANK_INFO *pBankInfo, MV_U32 busClk, + MV_U32 forcedCl); +static MV_U32 sdramTimeCtrlLowRegCalc(MV_DRAM_BANK_INFO *pBankInfo, + MV_U32 minCas, MV_U32 busClk); +static MV_U32 sdramTimeCtrlHighRegCalc(MV_DRAM_BANK_INFO *pBankInfo, + MV_U32 busClk); + +/******************************************************************************* +* mvDramIfDetect - Prepare DRAM interface configuration values. +* +* DESCRIPTION: +* This function implements the full DRAM detection and timing +* configuration for best system performance. +* Since this routine runs from a ROM device (Boot Flash), its stack +* resides on RAM, that might be the system DRAM. Changing DRAM +* configuration values while keeping vital data in DRAM is risky. That +* is why the function does not preform the configuration setting but +* prepare those in predefined 32bit registers (in this case IDMA +* registers are used) for other routine to perform the settings. +* The function will call for board DRAM SPD information for each DRAM +* chip select. The function will then analyze those SPD parameters of +* all DRAM banks in order to decide on DRAM configuration compatible +* for all DRAM banks. +* The function will set the CPU DRAM address decode registers. +* Note: This routine prepares values that will overide configuration of +* mvDramBasicAsmInit(). +* +* INPUT: +* forcedCl - Forced CAL Latency. If equal to zero, do not force. +* +* OUTPUT: +* None. +* +* RETURN: +* None. +* +*******************************************************************************/ +MV_STATUS mvDramIfDetect(MV_U32 forcedCl) +{ + MV_U32 retVal = MV_OK; /* return value */ + MV_DRAM_BANK_INFO bankInfo[MV_DRAM_MAX_CS]; + MV_U32 busClk, size, base = 0, i, temp, deviceW, dimmW; + MV_U8 minCas; + MV_DRAM_DEC_WIN dramDecWin; + + dramDecWin.addrWin.baseHigh = 0; + + busClk = mvBoardSysClkGet(); + + if (0 == busClk) + { + mvOsPrintf("Dram: ERR. Can't detect system clock! \n"); + return MV_ERROR; + } + + /* Close DRAM banks except bank 0 (in case code is excecuting from it...) */ +#if defined(MV_INCLUDE_SDRAM_CS1) + for(i= SDRAM_CS1; i < MV_DRAM_MAX_CS; i++) + mvCpuIfTargetWinEnable(i, MV_FALSE); +#endif + + /* we will use bank 0 as the representative of the all the DRAM banks, */ + /* since bank 0 must exist. */ + for(i = 0; i < MV_DRAM_MAX_CS; i++) + { + /* if Bank exist */ + if(MV_OK == mvDramBankInfoGet(i, &bankInfo[i])) + { + /* check it isn't SDRAM */ + if(bankInfo[i].memoryType == MEM_TYPE_SDRAM) + { + mvOsPrintf("Dram: ERR. SDRAM type not supported !!!\n"); + return MV_ERROR; + } + /* All banks must support registry in order to activate it */ + if(bankInfo[i].registeredAddrAndControlInputs != + bankInfo[0].registeredAddrAndControlInputs) + { + mvOsPrintf("Dram: ERR. different Registered settings !!!\n"); + return MV_ERROR; + } + + /* Init the CPU window decode */ + /* Note that the size in Bank info is in MB units */ + /* Note that the Dimm width might be different then the device DRAM width */ + temp = MV_REG_READ(SDRAM_CONFIG_REG); + + deviceW = ((temp & SDRAM_DWIDTH_MASK) == SDRAM_DWIDTH_16BIT )? 16 : 32; + dimmW = bankInfo[0].dataWidth - (bankInfo[0].dataWidth % 16); + size = ((bankInfo[i].size << 20) / (dimmW/deviceW)); + + /* We can not change DRAM window settings while excecuting */ + /* code from it. That is why we skip the DRAM CS[0], saving */ + /* it to the ROM configuration routine */ + if(i == SDRAM_CS0) + { + MV_U32 sizeToReg; + + /* Translate the given window size to register format */ + sizeToReg = ctrlSizeToReg(size, SCSR_SIZE_ALIGNMENT); + + /* Size parameter validity check. */ + if (-1 == sizeToReg) + { + mvOsPrintf("mvCtrlAddrDecToReg: ERR. Win %d size invalid.\n" + ,i); + return MV_BAD_PARAM; + } + + /* Size is located at upper 16 bits */ + sizeToReg <<= SCSR_SIZE_OFFS; + + /* enable it */ + sizeToReg |= SCSR_WIN_EN; + + MV_REG_WRITE(DRAM_BUF_REG0, sizeToReg); + } + else + { + dramDecWin.addrWin.baseLow = base; + dramDecWin.addrWin.size = size; + dramDecWin.enable = MV_TRUE; + + if (MV_OK != mvDramIfWinSet(SDRAM_CS0 + i, &dramDecWin)) + { + mvOsPrintf("Dram: ERR. Fail to set bank %d!!!\n", + SDRAM_CS0 + i); + return MV_ERROR; + } + } + + base += size; + + /* update the suportedCasLatencies mask */ + bankInfo[0].suportedCasLatencies &= bankInfo[i].suportedCasLatencies; + + } + else + { + if( i == 0 ) /* bank 0 doesn't exist */ + { + mvOsPrintf("Dram: ERR. Fail to detect bank 0 !!!\n"); + return MV_ERROR; + } + else + { + DB(mvOsPrintf("Dram: Could not find bank %d\n", i)); + bankInfo[i].size = 0; /* Mark this bank as non exist */ + } + } + } + + /* calculate minimum CAS */ + minCas = minCasCalc(&bankInfo[0], busClk, forcedCl); + if (0 == minCas) + { + mvOsOutput("Dram: Warn: Could not find CAS compatible to SysClk %dMhz\n", + (busClk / 1000000)); + + if (MV_REG_READ(SDRAM_CONFIG_REG) & SDRAM_DTYPE_DDR2) + { + minCas = DDR2_CL_4; /* Continue with this CAS */ + mvOsPrintf("Set default CAS latency 4\n"); + } + else + { + minCas = DDR1_CL_3; /* Continue with this CAS */ + mvOsPrintf("Set default CAS latency 3\n"); + } + } + + /* calc SDRAM_CONFIG_REG and save it to temp register */ + temp = sdramConfigRegCalc(&bankInfo[0], busClk); + if(-1 == temp) + { + mvOsPrintf("Dram: ERR. sdramConfigRegCalc failed !!!\n"); + return MV_ERROR; + } + MV_REG_WRITE(DRAM_BUF_REG1, temp); + + /* calc SDRAM_MODE_REG and save it to temp register */ + temp = sdramModeRegCalc(minCas); + if(-1 == temp) + { + mvOsPrintf("Dram: ERR. sdramModeRegCalc failed !!!\n"); + return MV_ERROR; + } + MV_REG_WRITE(DRAM_BUF_REG2, temp); + + /* calc SDRAM_EXTENDED_MODE_REG and save it to temp register */ + temp = sdramExtModeRegCalc(&bankInfo[0]); + if(-1 == temp) + { + mvOsPrintf("Dram: ERR. sdramModeRegCalc failed !!!\n"); + return MV_ERROR; + } + MV_REG_WRITE(DRAM_BUF_REG10, temp); + + /* calc D_UNIT_CONTROL_LOW and save it to temp register */ + temp = dunitCtrlLowRegCalc(&bankInfo[0], minCas); + if(-1 == temp) + { + mvOsPrintf("Dram: ERR. dunitCtrlLowRegCalc failed !!!\n"); + return MV_ERROR; + } + MV_REG_WRITE(DRAM_BUF_REG3, temp); + + /* calc SDRAM_ADDR_CTRL_REG and save it to temp register */ + temp = sdramAddrCtrlRegCalc(&bankInfo[0]); + if(-1 == temp) + { + mvOsPrintf("Dram: ERR. sdramAddrCtrlRegCalc failed !!!\n"); + return MV_ERROR; + } + MV_REG_WRITE(DRAM_BUF_REG4, temp); + + /* calc SDRAM_TIMING_CTRL_LOW_REG and save it to temp register */ + temp = sdramTimeCtrlLowRegCalc(&bankInfo[0], minCas, busClk); + if(-1 == temp) + { + mvOsPrintf("Dram: ERR. sdramTimeCtrlLowRegCalc failed !!!\n"); + return MV_ERROR; + } + MV_REG_WRITE(DRAM_BUF_REG5, temp); + + /* calc SDRAM_TIMING_CTRL_HIGH_REG and save it to temp register */ + temp = sdramTimeCtrlHighRegCalc(&bankInfo[0], busClk); + if(-1 == temp) + { + mvOsPrintf("Dram: ERR. sdramTimeCtrlHighRegCalc failed !!!\n"); + return MV_ERROR; + } + MV_REG_WRITE(DRAM_BUF_REG6, temp); + + /* Config DDR2 On Die Termination (ODT) registers */ + if (MV_REG_READ(SDRAM_CONFIG_REG) & SDRAM_DTYPE_DDR2) + { + sdramDDr2OdtConfig(bankInfo); + } + + /* Note that DDR SDRAM Address/Control and Data pad calibration */ + /* settings is done in mvSdramIfConfig.s */ + + return retVal; +} + +/******************************************************************************* +* minCasCalc - Calculate the Minimum CAS latency which can be used. +* +* DESCRIPTION: +* Calculate the minimum CAS latency that can be used, base on the DRAM +* parameters and the SDRAM bus Clock freq. +* +* INPUT: +* busClk - the DRAM bus Clock. +* pBankInfo - bank info parameters. +* +* OUTPUT: +* None +* +* RETURN: +* The minimum CAS Latency. The function returns 0 if max CAS latency +* supported by banks is incompatible with system bus clock frequancy. +* +*******************************************************************************/ +static MV_U32 minCasCalc(MV_DRAM_BANK_INFO *pBankInfo, MV_U32 busClk, + MV_U32 forcedCl) +{ + MV_U32 count = 1, j; + MV_U32 busClkPs = 1000000000 / (busClk / 1000); /* in ps units */ + MV_U32 startBit, stopBit; + + /* DDR 1: + *******-******-******-******-******-******-******-******* + * bit7 | bit6 | bit5 | bit4 | bit3 | bit2 | bit1 | bit0 * + *******-******-******-******-******-******-******-******* + CAS = * TBD | 4 | 3.5 | 3 | 2.5 | 2 | 1.5 | 1 * + *********************************************************/ + + /* DDR 2: + *******-******-******-******-******-******-******-******* + * bit7 | bit6 | bit5 | bit4 | bit3 | bit2 | bit1 | bit0 * + *******-******-******-******-******-******-******-******* + CAS = * TBD | TBD | 5 | 4 | 3 | 2 | TBD | TBD * + *********************************************************/ + + + /* If we are asked to use the forced CAL */ + if (forcedCl) + { + mvOsPrintf("DRAM: Using forced CL %d.%d\n", (forcedCl / 10), + (forcedCl % 10)); + + if (MV_REG_READ(SDRAM_CONFIG_REG) & SDRAM_DTYPE_DDR2) + { + if (forcedCl == 30) + pBankInfo->suportedCasLatencies = 0x08; + else if (forcedCl == 40) + pBankInfo->suportedCasLatencies = 0x10; + else + { + mvOsPrintf("Forced CL %d.%d not supported. Set default CL 4\n", + (forcedCl / 10), (forcedCl % 10)); + pBankInfo->suportedCasLatencies = 0x10; + } + } + else + { + if (forcedCl == 15) + pBankInfo->suportedCasLatencies = 0x02; + else if (forcedCl == 20) + pBankInfo->suportedCasLatencies = 0x04; + else if (forcedCl == 25) + pBankInfo->suportedCasLatencies = 0x08; + else if (forcedCl == 30) + pBankInfo->suportedCasLatencies = 0x10; + else if (forcedCl == 40) + pBankInfo->suportedCasLatencies = 0x40; + else + { + mvOsPrintf("Forced CL %d.%d not supported. Set default CL 3\n", + (forcedCl / 10), (forcedCl % 10)); + pBankInfo->suportedCasLatencies = 0x10; + } + } + + return pBankInfo->suportedCasLatencies; + } + + /* go over the supported cas mask from Max Cas down and check if the */ + /* SysClk stands in its time requirments. */ + + + DB(mvOsPrintf("Dram: minCasCalc supported mask = %x busClkPs = %x \n", + pBankInfo->suportedCasLatencies,busClkPs )); + for(j = 7; j > 0; j--) + { + if((pBankInfo->suportedCasLatencies >> j) & BIT0 ) + { + /* Reset the bits for CL incompatible for the sysClk */ + switch (count) + { + case 1: + if (pBankInfo->minCycleTimeAtMaxCasLatPs > busClkPs) + pBankInfo->suportedCasLatencies &= ~(BIT0 << j); + count++; + break; + case 2: + if (pBankInfo->minCycleTimeAtMaxCasLatMinus1Ps > busClkPs) + pBankInfo->suportedCasLatencies &= ~(BIT0 << j); + count++; + break; + case 3: + if (pBankInfo->minCycleTimeAtMaxCasLatMinus2Ps > busClkPs) + pBankInfo->suportedCasLatencies &= ~(BIT0 << j); + count++; + break; + default: + pBankInfo->suportedCasLatencies &= ~(BIT0 << j); + break; + } + } + } + + DB(mvOsPrintf("Dram: minCasCalc support = %x (after SysCC calc)\n", + pBankInfo->suportedCasLatencies )); + + /* SDRAM DDR1 controller supports CL 1.5 to 3.5 */ + /* SDRAM DDR2 controller supports CL 3 to 5 */ + if (MV_REG_READ(SDRAM_CONFIG_REG) & SDRAM_DTYPE_DDR2) + { + startBit = 3; /* DDR2 support CL start with CL3 (bit 3) */ + stopBit = 5; /* DDR2 support CL stops with CL5 (bit 5) */ + } + else + { + startBit = 1; /* DDR1 support CL start with CL1.5 (bit 3) */ + stopBit = 4; /* DDR1 support CL stops with CL3 (bit 4) */ + } + + for(j = startBit; j <= stopBit ; j++) + { + if((pBankInfo->suportedCasLatencies >> j) & BIT0 ) + { + DB(mvOsPrintf("Dram: minCasCalc choose CAS %x \n",(BIT0 << j))); + return (BIT0 << j); + } + } + + return 0; +} + +/******************************************************************************* +* sdramConfigRegCalc - Calculate sdram config register +* +* DESCRIPTION: Calculate sdram config register optimized value based +* on the bank info parameters. +* +* INPUT: +* pBankInfo - sdram bank parameters +* +* OUTPUT: +* None +* +* RETURN: +* sdram config reg value. +* +*******************************************************************************/ +static MV_U32 sdramConfigRegCalc(MV_DRAM_BANK_INFO *pBankInfo, MV_U32 busClk) +{ + MV_U32 sdramConfig = 0; + MV_U32 refreshPeriod; + + busClk /= 1000000; /* we work with busClk in MHz */ + + sdramConfig = MV_REG_READ(SDRAM_CONFIG_REG); + + /* figure out the memory refresh internal */ + switch (pBankInfo->refreshInterval & 0xf) + { + case 0x0: /* refresh period is 15.625 usec */ + refreshPeriod = 15625; + break; + case 0x1: /* refresh period is 3.9 usec */ + refreshPeriod = 3900; + break; + case 0x2: /* refresh period is 7.8 usec */ + refreshPeriod = 7800; + break; + case 0x3: /* refresh period is 31.3 usec */ + refreshPeriod = 31300; + break; + case 0x4: /* refresh period is 62.5 usec */ + refreshPeriod = 62500; + break; + case 0x5: /* refresh period is 125 usec */ + refreshPeriod = 125000; + break; + default: /* refresh period undefined */ + mvOsPrintf("Dram: ERR. DRAM refresh period is unknown!\n"); + return -1; + } + + /* Now the refreshPeriod is in register format value */ + refreshPeriod = (busClk * refreshPeriod) / 1000; + + DB(mvOsPrintf("Dram: sdramConfigRegCalc calculated refresh interval %0x\n", + refreshPeriod)); + + /* make sure the refresh value is only 14 bits */ + if(refreshPeriod > SDRAM_REFRESH_MAX) + { + refreshPeriod = SDRAM_REFRESH_MAX; + DB(mvOsPrintf("Dram: sdramConfigRegCalc adjusted refresh interval %0x\n", + refreshPeriod)); + } + + /* Clear the refresh field */ + sdramConfig &= ~SDRAM_REFRESH_MASK; + + /* Set new value to refresh field */ + sdramConfig |= (refreshPeriod & SDRAM_REFRESH_MASK); + + /* registered DRAM ? */ + if ( pBankInfo->registeredAddrAndControlInputs ) + { + /* it's registered DRAM, so set the reg. DRAM bit */ + sdramConfig |= SDRAM_REGISTERED; + mvOsPrintf("DRAM Attribute: Registered address and control inputs.\n"); + } + + /* set DDR SDRAM devices configuration */ + sdramConfig &= ~SDRAM_DCFG_MASK; /* Clear Dcfg field */ + + switch (pBankInfo->sdramWidth) + { + case 8: /* memory is x8 */ + sdramConfig |= SDRAM_DCFG_X8_DEV; + DB(mvOsPrintf("Dram: sdramConfigRegCalc SDRAM device width x8\n")); + break; + case 16: + sdramConfig |= SDRAM_DCFG_X16_DEV; + DB(mvOsPrintf("Dram: sdramConfigRegCalc SDRAM device width x16\n")); + break; + default: /* memory width unsupported */ + mvOsPrintf("Dram: ERR. DRAM chip width is unknown!\n"); + return -1; + } + + /* Set static default settings */ + sdramConfig |= SDRAM_CONFIG_DV; + + DB(mvOsPrintf("Dram: sdramConfigRegCalc set sdramConfig to 0x%x\n", + sdramConfig)); + + return sdramConfig; +} + +/******************************************************************************* +* sdramModeRegCalc - Calculate sdram mode register +* +* DESCRIPTION: Calculate sdram mode register optimized value based +* on the bank info parameters and the minCas. +* +* INPUT: +* minCas - minimum CAS supported. +* +* OUTPUT: +* None +* +* RETURN: +* sdram mode reg value. +* +*******************************************************************************/ +static MV_U32 sdramModeRegCalc(MV_U32 minCas) +{ + MV_U32 sdramMode; + + sdramMode = MV_REG_READ(SDRAM_MODE_REG); + + /* Clear CAS Latency field */ + sdramMode &= ~SDRAM_CL_MASK; + + mvOsPrintf("DRAM CAS Latency "); + + if (MV_REG_READ(SDRAM_CONFIG_REG) & SDRAM_DTYPE_DDR2) + { + switch (minCas) + { + case DDR2_CL_3: + sdramMode |= SDRAM_DDR2_CL_3; + mvOsPrintf("3.\n"); + break; + case DDR2_CL_4: + sdramMode |= SDRAM_DDR2_CL_4; + mvOsPrintf("4.\n"); + break; + case DDR2_CL_5: + sdramMode |= SDRAM_DDR2_CL_5; + mvOsPrintf("5.\n"); + break; + default: + mvOsPrintf("\nsdramModeRegCalc ERROR: Max. CL out of range\n"); + return -1; + } + sdramMode |= DDR2_MODE_REG_DV; + } + else /* DDR1 */ + { + switch (minCas) + { + case DDR1_CL_1_5: + sdramMode |= SDRAM_DDR1_CL_1_5; + mvOsPrintf("1.5\n"); + break; + case DDR1_CL_2: + sdramMode |= SDRAM_DDR1_CL_2; + mvOsPrintf("2\n"); + break; + case DDR1_CL_2_5: + sdramMode |= SDRAM_DDR1_CL_2_5; + mvOsPrintf("2.5\n"); + break; + case DDR1_CL_3: + sdramMode |= SDRAM_DDR1_CL_3; + mvOsPrintf("3\n"); + break; + case DDR1_CL_4: + sdramMode |= SDRAM_DDR1_CL_4; + mvOsPrintf("4\n"); + break; + default: + mvOsPrintf("\nsdramModeRegCalc ERROR: Max. CL out of range\n"); + return -1; + } + sdramMode |= DDR1_MODE_REG_DV; + } + + DB(mvOsPrintf("nsdramModeRegCalc register 0x%x\n", sdramMode )); + + return sdramMode; +} + +/******************************************************************************* +* sdramExtModeRegCalc - Calculate sdram Extended mode register +* +* DESCRIPTION: +* Return sdram Extended mode register value based +* on the bank info parameters and bank presence. +* +* INPUT: +* pBankInfo - sdram bank parameters +* +* OUTPUT: +* None +* +* RETURN: +* sdram Extended mode reg value. +* +*******************************************************************************/ +static MV_U32 sdramExtModeRegCalc(MV_DRAM_BANK_INFO *pBankInfo) +{ + MV_U32 populateBanks = 0; + int bankNum; + if (MV_REG_READ(SDRAM_CONFIG_REG) & SDRAM_DTYPE_DDR2) + { + /* Represent the populate banks in binary form */ + for(bankNum = 0; bankNum < MV_DRAM_MAX_CS; bankNum++) + { + if (0 != pBankInfo[bankNum].size) + { + populateBanks |= (1 << bankNum); + } + } + + switch(populateBanks) + { + case(BANK_PRESENT_CS0): + return DDR_SDRAM_EXT_MODE_CS0_DV; + + case(BANK_PRESENT_CS0_CS1): + return DDR_SDRAM_EXT_MODE_CS0_DV; + + case(BANK_PRESENT_CS0_CS2): + return DDR_SDRAM_EXT_MODE_CS0_CS2_DV; + + case(BANK_PRESENT_CS0_CS1_CS2): + return DDR_SDRAM_EXT_MODE_CS0_CS2_DV; + + case(BANK_PRESENT_CS0_CS2_CS3): + return DDR_SDRAM_EXT_MODE_CS0_CS2_DV; + + case(BANK_PRESENT_CS0_CS2_CS3_CS4): + return DDR_SDRAM_EXT_MODE_CS0_CS2_DV; + + default: + mvOsPrintf("sdramExtModeRegCalc: Invalid DRAM bank presence\n"); + return -1; + } + } + return 0; +} + +/******************************************************************************* +* dunitCtrlLowRegCalc - Calculate sdram dunit control low register +* +* DESCRIPTION: Calculate sdram dunit control low register optimized value based +* on the bank info parameters and the minCas. +* +* INPUT: +* pBankInfo - sdram bank parameters +* minCas - minimum CAS supported. +* +* OUTPUT: +* None +* +* RETURN: +* sdram dunit control low reg value. +* +*******************************************************************************/ +static MV_U32 dunitCtrlLowRegCalc(MV_DRAM_BANK_INFO *pBankInfo, MV_U32 minCas) +{ + MV_U32 dunitCtrlLow; + + dunitCtrlLow = MV_REG_READ(SDRAM_DUNIT_CTRL_REG); + + /* Clear StBurstDel field */ + dunitCtrlLow &= ~SDRAM_ST_BURST_DEL_MASK; + +#ifdef MV_88W8660 + /* Clear address/control output timing field */ + dunitCtrlLow &= ~SDRAM_CTRL_POS_RISE; +#endif /* MV_88W8660 */ + + DB(mvOsPrintf("Dram: dunitCtrlLowRegCalc\n")); + + /* For proper sample of read data set the Dunit Control register's */ + /* stBurstDel bits [27:24] */ + /********-********-********-********-********-********* + * CL=1.5 | CL=2 | CL=2.5 | CL=3 | CL=4 | CL=5 * + *********-********-********-********-********-********* +Not Reg. * 0011 | 0011 | 0100 | 0100 | 0101 | TBD * + *********-********-********-********-********-********* +Registered * 0100 | 0100 | 0101 | 0101 | 0110 | TBD * + *********-********-********-********-********-*********/ + + if (MV_REG_READ(SDRAM_CONFIG_REG) & SDRAM_DTYPE_DDR2) + { + switch (minCas) + { + case DDR2_CL_3: + /* registerd DDR SDRAM? */ + if (pBankInfo->registeredAddrAndControlInputs == MV_TRUE) + dunitCtrlLow |= 0x5 << SDRAM_ST_BURST_DEL_OFFS; + else + dunitCtrlLow |= 0x4 << SDRAM_ST_BURST_DEL_OFFS; + break; + case DDR2_CL_4: + /* registerd DDR SDRAM? */ + if (pBankInfo->registeredAddrAndControlInputs == MV_TRUE) + dunitCtrlLow |= 0x6 << SDRAM_ST_BURST_DEL_OFFS; + else + dunitCtrlLow |= 0x5 << SDRAM_ST_BURST_DEL_OFFS; + break; + default: + mvOsPrintf("Dram: dunitCtrlLowRegCalc Max. CL out of range %d\n", + minCas); + return -1; + } + } + else /* DDR1 */ + { + switch (minCas) + { + case DDR1_CL_1_5: + /* registerd DDR SDRAM? */ + if (pBankInfo->registeredAddrAndControlInputs == MV_TRUE) + dunitCtrlLow |= 0x4 << SDRAM_ST_BURST_DEL_OFFS; + else + dunitCtrlLow |= 0x3 << SDRAM_ST_BURST_DEL_OFFS; + break; + case DDR1_CL_2: + /* registerd DDR SDRAM? */ + if (pBankInfo->registeredAddrAndControlInputs == MV_TRUE) + dunitCtrlLow |= 0x4 << SDRAM_ST_BURST_DEL_OFFS; + else + dunitCtrlLow |= 0x3 << SDRAM_ST_BURST_DEL_OFFS; + break; + case DDR1_CL_2_5: + /* registerd DDR SDRAM? */ + if (pBankInfo->registeredAddrAndControlInputs == MV_TRUE) + dunitCtrlLow |= 0x5 << SDRAM_ST_BURST_DEL_OFFS; + else + dunitCtrlLow |= 0x4 << SDRAM_ST_BURST_DEL_OFFS; + break; + case DDR1_CL_3: + /* registerd DDR SDRAM? */ + if (pBankInfo->registeredAddrAndControlInputs == MV_TRUE) + dunitCtrlLow |= 0x5 << SDRAM_ST_BURST_DEL_OFFS; + else + dunitCtrlLow |= 0x4 << SDRAM_ST_BURST_DEL_OFFS; + break; + case DDR1_CL_4: + /* registerd DDR SDRAM? */ + if (pBankInfo->registeredAddrAndControlInputs == MV_TRUE) + dunitCtrlLow |= 0x6 << SDRAM_ST_BURST_DEL_OFFS; + else + dunitCtrlLow |= 0x5 << SDRAM_ST_BURST_DEL_OFFS; + break; + default: + mvOsPrintf("Dram: dunitCtrlLowRegCalc Max. CL out of range %d\n", + minCas); + return -1; + } + + } + DB(mvOsPrintf("Dram: Reg dunit control low = %x\n", dunitCtrlLow )); + + return dunitCtrlLow; +} + +/******************************************************************************* +* sdramAddrCtrlRegCalc - Calculate sdram address control register +* +* DESCRIPTION: Calculate sdram address control register optimized value based +* on the bank info parameters and the minCas. +* +* INPUT: +* pBankInfo - sdram bank parameters +* +* OUTPUT: +* None +* +* RETURN: +* sdram address control reg value. +* +*******************************************************************************/ +static MV_U32 sdramAddrCtrlRegCalc(MV_DRAM_BANK_INFO *pBankInfo) +{ + MV_U32 addrCtrl = 0; + + /* Set Address Control register static configuration bits */ + addrCtrl = MV_REG_READ(SDRAM_ADDR_CTRL_REG); + + /* Set address control default value */ + addrCtrl |= SDRAM_ADDR_CTRL_DV; + + /* Clear DSize field */ + addrCtrl &= ~SDRAM_DSIZE_MASK; + + /* Note that density is in MB units */ + switch (pBankInfo->deviceDensity) + { + case 128: /* 128 Mbit */ + DB(mvOsPrintf("DRAM Device Density 128Mbit\n")); + addrCtrl |= SDRAM_DSIZE_128Mb; + break; + case 256: /* 256 Mbit */ + DB(mvOsPrintf("DRAM Device Density 256Mbit\n")); + addrCtrl |= SDRAM_DSIZE_256Mb; + break; + case 512: /* 512 Mbit */ + DB(mvOsPrintf("DRAM Device Density 512Mbit\n")); + addrCtrl |= SDRAM_DSIZE_512Mb; + break; + default: + mvOsPrintf("Dram: sdramAddrCtrl unsupported RAM-Device size %d\n", + pBankInfo->deviceDensity); + return -1; + } + + /* SDRAM address control */ + DB(mvOsPrintf("Dram: setting sdram address control with: %x \n", addrCtrl)); + + return addrCtrl; +} + +/******************************************************************************* +* sdramTimeCtrlLowRegCalc - Calculate sdram timing control low register +* +* DESCRIPTION: +* This function calculates sdram timing control low register +* optimized value based on the bank info parameters and the minCas. +* +* INPUT: +* pBankInfo - sdram bank parameters +* busClk - Bus clock +* +* OUTPUT: +* None +* +* RETURN: +* sdram timinf control low reg value. +* +*******************************************************************************/ +static MV_U32 sdramTimeCtrlLowRegCalc(MV_DRAM_BANK_INFO *pBankInfo, + MV_U32 minCas, MV_U32 busClk) +{ + MV_U32 tRp = 0; + MV_U32 tRrd = 0; + MV_U32 tRcd = 0; + MV_U32 tRas = 0; + MV_U32 tWr = 0; + MV_U32 tWtr = 0; + MV_U32 tRtp = 0; + + MV_U32 bankNum; + + busClk = busClk / 1000000; /* In MHz */ + + /* Scan all DRAM banks to find maximum timing values */ + for (bankNum = 0; bankNum < MV_DRAM_MAX_CS; bankNum++) + { + tRp = MV_MAX(tRp, pBankInfo[bankNum].minRowPrechargeTime); + tRrd = MV_MAX(tRrd, pBankInfo[bankNum].minRowActiveToRowActive); + tRcd = MV_MAX(tRcd, pBankInfo[bankNum].minRasToCasDelay); + tRas = MV_MAX(tRas, pBankInfo[bankNum].minRasPulseWidth); + } + + /* Extract timing (in ns) from SPD value. We ignore the tenth ns part. */ + /* by shifting the data two bits right. */ + tRp = tRp >> 2; /* For example 0x50 -> 20ns */ + tRrd = tRrd >> 2; + tRcd = tRcd >> 2; + + /* Extract clock cycles from time parameter. We need to round up */ + tRp = ((busClk * tRp) / 1000) + (((busClk * tRp) % 1000) ? 1 : 0); + /* Micron work around for 133MHz */ + if (busClk == 133) + tRp += 1; + DB(mvOsPrintf("Dram Timing Low: tRp = %d ", tRp)); + tRrd = ((busClk * tRrd) / 1000) + (((busClk * tRrd) % 1000) ? 1 : 0); + /* JEDEC min reqeirments tRrd = 2 */ + if (tRrd < 2) + tRrd = 2; + DB(mvOsPrintf("tRrd = %d ", tRrd)); + tRcd = ((busClk * tRcd) / 1000) + (((busClk * tRcd) % 1000) ? 1 : 0); + DB(mvOsPrintf("tRcd = %d ", tRcd)); + tRas = ((busClk * tRas) / 1000) + (((busClk * tRas) % 1000) ? 1 : 0); + DB(mvOsPrintf("tRas = %d ", tRas)); + + /* tWr and tWtr is different for DDR1 and DDR2. tRtp is only for DDR2 */ + if (MV_REG_READ(SDRAM_CONFIG_REG) & SDRAM_DTYPE_DDR2) + { + /* Scan all DRAM banks to find maximum timing values */ + for (bankNum = 0; bankNum < MV_DRAM_MAX_CS; bankNum++) + { + tWr = MV_MAX(tWr, pBankInfo[bankNum].minWriteRecoveryTime); + tWtr = MV_MAX(tWtr, pBankInfo[bankNum].minWriteToReadCmdDelay); + tRtp = MV_MAX(tRtp, pBankInfo[bankNum].minReadToPrechCmdDelay); + } + + /* Extract timing (in ns) from SPD value. We ignore the tenth ns */ + /* part by shifting the data two bits right. */ + tWr = tWr >> 2; /* For example 0x50 -> 20ns */ + tWtr = tWtr >> 2; + tRtp = tRtp >> 2; + + /* Extract clock cycles from time parameter. We need to round up */ + tWr = ((busClk * tWr) / 1000) + (((busClk * tWr) % 1000) ? 1 : 0); + DB(mvOsPrintf("tWr = %d ", tWr)); + tWtr = ((busClk * tWtr) / 1000) + (((busClk * tWtr) % 1000) ? 1 : 0); + /* JEDEC min reqeirments tWtr = 2 */ + if (tWtr < 2) + tWtr = 2; + DB(mvOsPrintf("tWtr = %d ", tWtr)); + tRtp = ((busClk * tRtp) / 1000) + (((busClk * tRtp) % 1000) ? 1 : 0); + /* JEDEC min reqeirments tRtp = 2 */ + if (tRtp < 2) + tRtp = 2; + DB(mvOsPrintf("tRtp = %d ", tRtp)); + } + else + { + tWr = ((busClk*SDRAM_TWR) / 1000) + (((busClk*SDRAM_TWR) % 1000)?1:0); + + if ((200 == busClk) || ((100 == busClk) && (DDR1_CL_1_5 == minCas))) + { + tWtr = 2; + } + else + { + tWtr = 1; + } + + tRtp = 2; /* Must be set to 0x1 (two cycles) when using DDR1 */ + } + + DB(mvOsPrintf("tWtr = %d\n", tWtr)); + + /* Note: value of 0 in register means one cycle, 1 means two and so on */ + return (((tRp - 1) << SDRAM_TRP_OFFS) | + ((tRrd - 1) << SDRAM_TRRD_OFFS) | + ((tRcd - 1) << SDRAM_TRCD_OFFS) | + ((tRas - 1) << SDRAM_TRAS_OFFS) | + ((tWr - 1) << SDRAM_TWR_OFFS) | + ((tWtr - 1) << SDRAM_TWTR_OFFS) | + ((tRtp - 1) << SDRAM_TRTP_OFFS)); +} + +/******************************************************************************* +* sdramTimeCtrlHighRegCalc - Calculate sdram timing control high register +* +* DESCRIPTION: +* This function calculates sdram timing control high register +* optimized value based on the bank info parameters and the bus clock. +* +* INPUT: +* pBankInfo - sdram bank parameters +* busClk - Bus clock +* +* OUTPUT: +* None +* +* RETURN: +* sdram timinf control high reg value. +* +*******************************************************************************/ +static MV_U32 sdramTimeCtrlHighRegCalc(MV_DRAM_BANK_INFO *pBankInfo, + MV_U32 busClk) +{ + MV_U32 tRfc; + MV_U32 timeNs = 0; + int bankNum; + MV_U32 sdramTw2wCyc = 0; + + busClk = busClk / 1000000; /* In MHz */ + + /* tRfc is different for DDR1 and DDR2. */ + if (MV_REG_READ(SDRAM_CONFIG_REG) & SDRAM_DTYPE_DDR2) + { + MV_U32 bankNum; + + /* Scan all DRAM banks to find maximum timing values */ + for (bankNum = 0; bankNum < MV_DRAM_MAX_CS; bankNum++) + timeNs = MV_MAX(timeNs, pBankInfo[bankNum].minRefreshToActiveCmd); + } + else + { + if (pBankInfo[0].deviceDensity == _1G) + { + timeNs = SDRAM_TRFC_1G; + } + else + { + if (200 == busClk) + { + timeNs = SDRAM_TRFC_64_512M_AT_200MHZ; + } + else + { + timeNs = SDRAM_TRFC_64_512M; + } + } + } + + tRfc = ((busClk * timeNs) / 1000) + (((busClk * timeNs) % 1000) ? 1 : 0); + + DB(mvOsPrintf("Dram Timing High: tRfc = %d\n", tRfc)); + + + /* Represent the populate banks in binary form */ + for(bankNum = 0; bankNum < MV_DRAM_MAX_CS; bankNum++) + { + if (0 != pBankInfo[bankNum].size) + sdramTw2wCyc++; + } + + /* If we have more the 1 bank then we need the TW2W in 1 for ODT switch */ + if (sdramTw2wCyc > 1) + sdramTw2wCyc = 1; + else + sdramTw2wCyc = 0; + + /* Note: value of 0 in register means one cycle, 1 means two and so on */ + return ((((tRfc - 1) & SDRAM_TRFC_MASK) << SDRAM_TRFC_OFFS) | + ((SDRAM_TR2R_CYC - 1) << SDRAM_TR2R_OFFS) | + ((SDRAM_TR2WW2R_CYC - 1) << SDRAM_TR2W_W2R_OFFS) | + (((tRfc - 1) >> 4) << SDRAM_TRFC_EXT_OFFS) | + (sdramTw2wCyc << SDRAM_TW2W_OFFS)); + +} + +/******************************************************************************* +* sdramDDr2OdtConfig - Set DRAM DDR2 On Die Termination registers. +* +* DESCRIPTION: +* This function config DDR2 On Die Termination (ODT) registers. +* ODT configuration is done according to DIMM presence: +* +* Presence Ctrl Low Ctrl High Dunit Ctrl Ext Mode +* CS0 0x84210000 0x00000000 0x0000780F 0x00000440 +* CS0+CS1 0x84210000 0x00000000 0x0000780F 0x00000440 +* CS0+CS2 0x030C030C 0x00000000 0x0000740F 0x00000404 +* CS0+CS1+CS2 0x030C030C 0x00000000 0x0000740F 0x00000404 +* CS0+CS2+CS3 0x030C030C 0x00000000 0x0000740F 0x00000404 +* CS0+CS1+CS2+CS3 0x030C030C 0x00000000 0x0000740F 0x00000404 +* +* INPUT: +* pBankInfo - bank info parameters. +* +* OUTPUT: +* None +* +* RETURN: +* None +*******************************************************************************/ +static void sdramDDr2OdtConfig(MV_DRAM_BANK_INFO *pBankInfo) +{ + MV_U32 populateBanks = 0; + MV_U32 odtCtrlLow, odtCtrlHigh, dunitOdtCtrl; + int bankNum; + + /* Represent the populate banks in binary form */ + for(bankNum = 0; bankNum < MV_DRAM_MAX_CS; bankNum++) + { + if (0 != pBankInfo[bankNum].size) + { + populateBanks |= (1 << bankNum); + } + } + + switch(populateBanks) + { + case(BANK_PRESENT_CS0): + odtCtrlLow = DDR2_ODT_CTRL_LOW_CS0_DV; + odtCtrlHigh = DDR2_ODT_CTRL_HIGH_CS0_DV; + dunitOdtCtrl = DDR2_DUNIT_ODT_CTRL_CS0_DV; + break; + case(BANK_PRESENT_CS0_CS1): + odtCtrlLow = DDR2_ODT_CTRL_LOW_CS0_DV; + odtCtrlHigh = DDR2_ODT_CTRL_HIGH_CS0_DV; + dunitOdtCtrl = DDR2_DUNIT_ODT_CTRL_CS0_DV; + break; + case(BANK_PRESENT_CS0_CS2): + odtCtrlLow = DDR2_ODT_CTRL_LOW_CS0_CS2_DV; + odtCtrlHigh = DDR2_ODT_CTRL_HIGH_CS0_CS2_DV; + dunitOdtCtrl = DDR2_DUNIT_ODT_CTRL_CS0_CS2_DV; + break; + case(BANK_PRESENT_CS0_CS1_CS2): + odtCtrlLow = DDR2_ODT_CTRL_LOW_CS0_CS2_DV; + odtCtrlHigh = DDR2_ODT_CTRL_HIGH_CS0_CS2_DV; + dunitOdtCtrl = DDR2_DUNIT_ODT_CTRL_CS0_CS2_DV; + break; + case(BANK_PRESENT_CS0_CS2_CS3): + odtCtrlLow = DDR2_ODT_CTRL_LOW_CS0_CS2_DV; + odtCtrlHigh = DDR2_ODT_CTRL_HIGH_CS0_CS2_DV; + dunitOdtCtrl = DDR2_DUNIT_ODT_CTRL_CS0_CS2_DV; + break; + case(BANK_PRESENT_CS0_CS2_CS3_CS4): + odtCtrlLow = DDR2_ODT_CTRL_LOW_CS0_CS2_DV; + odtCtrlHigh = DDR2_ODT_CTRL_HIGH_CS0_CS2_DV; + dunitOdtCtrl = DDR2_DUNIT_ODT_CTRL_CS0_CS2_DV; + break; + default: + mvOsPrintf("sdramDDr2OdtConfig: Invalid DRAM bank presence\n"); + return; + } + MV_REG_WRITE(DRAM_BUF_REG7, odtCtrlLow); + MV_REG_WRITE(DRAM_BUF_REG8, odtCtrlHigh); + MV_REG_WRITE(DRAM_BUF_REG9, dunitOdtCtrl); + return; +} +#endif /* defined(MV_INC_BOARD_DDIM) */ + +/******************************************************************************* +* mvDramIfWinSet - Set DRAM interface address decode window +* +* DESCRIPTION: +* This function sets DRAM interface address decode window. +* +* INPUT: +* target - System target. Use only SDRAM targets. +* pAddrDecWin - SDRAM address window structure. +* +* OUTPUT: +* None +* +* RETURN: +* MV_BAD_PARAM if parameters are invalid or window is invalid, MV_OK +* otherwise. +*******************************************************************************/ +MV_STATUS mvDramIfWinSet(MV_TARGET target, MV_DRAM_DEC_WIN *pAddrDecWin) +{ + MV_U32 baseReg=0,sizeReg=0; + MV_U32 baseToReg=0 , sizeToReg=0; + + /* Check parameters */ + if (!MV_TARGET_IS_DRAM(target)) + { + mvOsPrintf("mvDramIfWinSet: target %d is not SDRAM\n", target); + return MV_BAD_PARAM; + } + + /* Check if the requested window overlaps with current enabled windows */ + if (MV_TRUE == sdramIfWinOverlap(target, &pAddrDecWin->addrWin)) + { + mvOsPrintf("mvDramIfWinSet: ERR. Target %d overlaps\n", target); + return MV_BAD_PARAM; + } + + /* check if address is aligned to the size */ + if(MV_IS_NOT_ALIGN(pAddrDecWin->addrWin.baseLow, pAddrDecWin->addrWin.size)) + { + mvOsPrintf("mvDramIfWinSet:Error setting DRAM interface window %d."\ + "\nAddress 0x%08x is unaligned to size 0x%x.\n", + target, + pAddrDecWin->addrWin.baseLow, + pAddrDecWin->addrWin.size); + return MV_ERROR; + } + + /* read base register*/ + baseReg = MV_REG_READ(SDRAM_BASE_ADDR_REG(target)); + + /* read size register */ + sizeReg = MV_REG_READ(SDRAM_SIZE_REG(target)); + + /* BaseLow[31:16] => base register [31:16] */ + baseToReg = pAddrDecWin->addrWin.baseLow & SCBAR_BASE_MASK; + + /* Write to address decode Base Address Register */ + baseReg &= ~SCBAR_BASE_MASK; + baseReg |= baseToReg; + + /* Translate the given window size to register format */ + sizeToReg = ctrlSizeToReg(pAddrDecWin->addrWin.size, SCSR_SIZE_ALIGNMENT); + + /* Size parameter validity check. */ + if (-1 == sizeToReg) + { + mvOsPrintf("mvCtrlAddrDecToReg: ERR. Win %d size invalid.\n",target); + return MV_BAD_PARAM; + } + + /* set size */ + sizeReg &= ~SCSR_SIZE_MASK; + /* Size is located at upper 16 bits */ + sizeReg |= (sizeToReg << SCSR_SIZE_OFFS); + + /* enable/Disable */ + if (MV_TRUE == pAddrDecWin->enable) + { + sizeReg |= SCSR_WIN_EN; + } + else + { + sizeReg &= ~SCSR_WIN_EN; + } + + /* 3) Write to address decode Base Address Register */ + MV_REG_WRITE(SDRAM_BASE_ADDR_REG(target), baseReg); + + /* Write to address decode Size Register */ + MV_REG_WRITE(SDRAM_SIZE_REG(target), sizeReg); + + return MV_OK; +} +/******************************************************************************* +* mvDramIfWinGet - Get DRAM interface address decode window +* +* DESCRIPTION: +* This function gets DRAM interface address decode window. +* +* INPUT: +* target - System target. Use only SDRAM targets. +* +* OUTPUT: +* pAddrDecWin - SDRAM address window structure. +* +* RETURN: +* MV_BAD_PARAM if parameters are invalid or window is invalid, MV_OK +* otherwise. +*******************************************************************************/ +MV_STATUS mvDramIfWinGet(MV_TARGET target, MV_DRAM_DEC_WIN *pAddrDecWin) +{ + MV_U32 baseReg,sizeReg; + MV_U32 sizeRegVal; + + /* Check parameters */ + if (!MV_TARGET_IS_DRAM(target)) + { + mvOsPrintf("mvDramIfWinGet: target %d is Illigal\n", target); + return MV_ERROR; + } + + /* Read base and size registers */ + sizeReg = MV_REG_READ(SDRAM_SIZE_REG(target)); + baseReg = MV_REG_READ(SDRAM_BASE_ADDR_REG(target)); + + sizeRegVal = (sizeReg & SCSR_SIZE_MASK) >> SCSR_SIZE_OFFS; + + pAddrDecWin->addrWin.size = ctrlRegToSize(sizeRegVal, + SCSR_SIZE_ALIGNMENT); + + /* Check if ctrlRegToSize returned OK */ + if (-1 == pAddrDecWin->addrWin.size) + { + mvOsPrintf("mvDramIfWinGet: size of target %d is Illigal\n", target); + return MV_ERROR; + } + + /* Extract base address */ + /* Base register [31:16] ==> baseLow[31:16] */ + pAddrDecWin->addrWin.baseLow = baseReg & SCBAR_BASE_MASK; + + pAddrDecWin->addrWin.baseHigh = 0; + + + if (sizeReg & SCSR_WIN_EN) + { + pAddrDecWin->enable = MV_TRUE; + } + else + { + pAddrDecWin->enable = MV_FALSE; + } + + return MV_OK; +} +/******************************************************************************* +* mvDramIfWinEnable - Enable/Disable SDRAM address decode window +* +* DESCRIPTION: +* This function enable/Disable SDRAM address decode window. +* +* INPUT: +* target - System target. Use only SDRAM targets. +* +* OUTPUT: +* None. +* +* RETURN: +* MV_ERROR in case function parameter are invalid, MV_OK otherewise. +* +*******************************************************************************/ +MV_STATUS mvDramIfWinEnable(MV_TARGET target,MV_BOOL enable) +{ + MV_DRAM_DEC_WIN addrDecWin; + + /* Check parameters */ + if (!MV_TARGET_IS_DRAM(target)) + { + mvOsPrintf("mvDramIfWinEnable: target %d is Illigal\n", target); + return MV_ERROR; + } + + if (enable == MV_TRUE) + { /* First check for overlap with other enabled windows */ + if (MV_OK != mvDramIfWinGet(target, &addrDecWin)) + { + mvOsPrintf("mvDramIfWinEnable:ERR. Getting target %d failed.\n", + target); + return MV_ERROR; + } + /* Check for overlapping */ + if (MV_FALSE == sdramIfWinOverlap(target, &(addrDecWin.addrWin))) + { + /* No Overlap. Enable address decode winNum window */ + MV_REG_BIT_SET(SDRAM_SIZE_REG(target), SCSR_WIN_EN); + } + else + { /* Overlap detected */ + mvOsPrintf("mvDramIfWinEnable: ERR. Target %d overlap detect\n", + target); + return MV_ERROR; + } + } + else + { /* Disable address decode winNum window */ + MV_REG_BIT_RESET(SDRAM_SIZE_REG(target), SCSR_WIN_EN); + } + + return MV_OK; +} + +/******************************************************************************* +* sdramIfWinOverlap - Check if an address window overlap an SDRAM address window +* +* DESCRIPTION: +* This function scan each SDRAM address decode window to test if it +* overlapps the given address windoow +* +* INPUT: +* target - SDRAM target where the function skips checking. +* pAddrDecWin - The tested address window for overlapping with +* SDRAM windows. +* +* OUTPUT: +* None. +* +* RETURN: +* MV_TRUE if the given address window overlaps any enabled address +* decode map, MV_FALSE otherwise. +* +*******************************************************************************/ +static MV_BOOL sdramIfWinOverlap(MV_TARGET target, MV_ADDR_WIN *pAddrWin) +{ + MV_TARGET targetNum; + MV_DRAM_DEC_WIN addrDecWin; + + for(targetNum = SDRAM_CS0; targetNum < MV_DRAM_MAX_CS ; targetNum++) + { + /* don't check our winNum or illegal targets */ + if (targetNum == target) + { + continue; + } + + /* Get window parameters */ + if (MV_OK != mvDramIfWinGet(targetNum, &addrDecWin)) + { + mvOsPrintf("sdramIfWinOverlap: ERR. TargetWinGet failed\n"); + return MV_ERROR; + } + + /* Do not check disabled windows */ + if (MV_FALSE == addrDecWin.enable) + { + continue; + } + + if(MV_TRUE == ctrlWinOverlapTest(pAddrWin, &addrDecWin.addrWin)) + { + mvOsPrintf( + "sdramIfWinOverlap: Required target %d overlap winNum %d\n", + target, targetNum); + return MV_TRUE; + } + } + + return MV_FALSE; +} + +/******************************************************************************* +* mvDramIfBankSizeGet - Get DRAM interface bank size. +* +* DESCRIPTION: +* This function returns the size of a given DRAM bank. +* +* INPUT: +* bankNum - Bank number. +* +* OUTPUT: +* None. +* +* RETURN: +* DRAM bank size. If bank is disabled the function return '0'. In case +* or paramter is invalid, the function returns -1. +* +*******************************************************************************/ +MV_32 mvDramIfBankSizeGet(MV_U32 bankNum) +{ + MV_DRAM_DEC_WIN addrDecWin; + + /* Check parameters */ + if (!MV_TARGET_IS_DRAM(bankNum)) + { + mvOsPrintf("mvDramIfBankBaseGet: bankNum %d is invalid\n", bankNum); + return -1; + } + /* Get window parameters */ + if (MV_OK != mvDramIfWinGet(bankNum, &addrDecWin)) + { + mvOsPrintf("sdramIfWinOverlap: ERR. TargetWinGet failed\n"); + return -1; + } + + if (MV_TRUE == addrDecWin.enable) + { + return addrDecWin.addrWin.size; + } + else + { + return 0; + } +} + + +/******************************************************************************* +* mvDramIfSizeGet - Get DRAM interface total size. +* +* DESCRIPTION: +* This function get the DRAM total size. +* +* INPUT: +* None. +* +* OUTPUT: +* None. +* +* RETURN: +* DRAM total size. In case or paramter is invalid, the function +* returns -1. +* +*******************************************************************************/ +MV_32 mvDramIfSizeGet(MV_VOID) +{ + MV_U32 totalSize = 0, bankSize = 0, bankNum; + + for(bankNum = 0; bankNum < MV_DRAM_MAX_CS; bankNum++) + { + bankSize = mvDramIfBankSizeGet(bankNum); + + if (-1 == bankSize) + { + mvOsPrintf("Dram: mvDramIfSizeGet error with bank %d \n",bankNum); + return -1; + } + else + { + totalSize += bankSize; + } + } + + DB(mvOsPrintf("Dram: Total DRAM size is 0x%x \n",totalSize)); + + return totalSize; +} + +/******************************************************************************* +* mvDramIfBankBaseGet - Get DRAM interface bank base. +* +* DESCRIPTION: +* This function returns the 32 bit base address of a given DRAM bank. +* +* INPUT: +* bankNum - Bank number. +* +* OUTPUT: +* None. +* +* RETURN: +* DRAM bank size. If bank is disabled or paramter is invalid, the +* function returns -1. +* +*******************************************************************************/ +MV_32 mvDramIfBankBaseGet(MV_U32 bankNum) +{ + MV_DRAM_DEC_WIN addrDecWin; + + /* Check parameters */ + if (!MV_TARGET_IS_DRAM(bankNum)) + { + mvOsPrintf("mvDramIfBankBaseGet: bankNum %d is invalid\n", bankNum); + return -1; + } + /* Get window parameters */ + if (MV_OK != mvDramIfWinGet(bankNum, &addrDecWin)) + { + mvOsPrintf("sdramIfWinOverlap: ERR. TargetWinGet failed\n"); + return -1; + } + + if (MV_TRUE == addrDecWin.enable) + { + return addrDecWin.addrWin.baseLow; + } + else + { + return -1; + } +} + + diff --git a/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/mv_hal/ddr1_2/mvDramIf.h b/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/mv_hal/ddr1_2/mvDramIf.h new file mode 100644 index 0000000000..8bfa3e8838 --- /dev/null +++ b/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/mv_hal/ddr1_2/mvDramIf.h @@ -0,0 +1,179 @@ +/******************************************************************************* +Copyright (C) Marvell International Ltd. and its affiliates + +This software file (the "File") is owned and distributed by Marvell +International Ltd. and/or its affiliates ("Marvell") under the following +alternative licensing terms. Once you have made an election to distribute the +File under one of the following license alternatives, please (i) delete this +introductory statement regarding license alternatives, (ii) delete the two +license alternatives that you have not elected to use and (iii) preserve the +Marvell copyright notice above. + +******************************************************************************** +Marvell Commercial License Option + +If you received this File from Marvell and you have entered into a commercial +license agreement (a "Commercial License") with Marvell, the File is licensed +to you under the terms of the applicable Commercial License. + +******************************************************************************** +Marvell GPL License Option + +If you received this File from Marvell, you may opt to use, redistribute and/or +modify this File in accordance with the terms and conditions of the General +Public License Version 2, June 1991 (the "GPL License"), a copy of which is +available along with the File in the license.txt file or by writing to the Free +Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or +on the worldwide web at http://www.gnu.org/licenses/gpl.txt. + +THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED +WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY +DISCLAIMED. The GPL License provides additional details about this warranty +disclaimer. +******************************************************************************** +Marvell BSD License Option + +If you received this File from Marvell, you may opt to use, redistribute and/or +modify this File under the following licensing terms. +Redistribution and use in source and binary forms, with or without modification, +are permitted provided that the following conditions are met: + + * Redistributions of source code must retain the above copyright notice, + this list of conditions and the following disclaimer. + + * Redistributions in binary form must reproduce the above copyright + notice, this list of conditions and the following disclaimer in the + documentation and/or other materials provided with the distribution. + + * Neither the name of Marvell nor the names of its contributors may be + used to endorse or promote products derived from this software without + specific prior written permission. + +THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND +ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED +WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE +DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR +ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES +(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; +LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON +ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS +SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + +*******************************************************************************/ + + +#ifndef __INCmvDramIfh +#define __INCmvDramIfh + +/* includes */ +#include "ddr1_2/mvDramIfRegs.h" +#include "ddr1_2/mvDramIfConfig.h" +#include "ctrlEnv/mvCtrlEnvLib.h" + +/* defines */ +/* DRAM Timing parameters */ +#define SDRAM_TWR 15 /* ns tWr */ +#define SDRAM_TRFC_64_512M_AT_200MHZ 70 /* ns tRfc for dens 64-512 @ 200MHz */ +#define SDRAM_TRFC_64_512M 75 /* ns tRfc for dens 64-512 */ +#define SDRAM_TRFC_1G 120 /* ns tRfc for dens 1GB */ +#define SDRAM_TR2R_CYC 1 /* cycle for tR2r */ +#define SDRAM_TR2WW2R_CYC 1 /* cycle for tR2wW2r */ + +/* typedefs */ + +/* enumeration for memory types */ +typedef enum _mvMemoryType +{ + MEM_TYPE_SDRAM, + MEM_TYPE_DDR1, + MEM_TYPE_DDR2 +}MV_MEMORY_TYPE; + +/* enumeration for DDR1 supported CAS Latencies */ +typedef enum _mvDimmDdr1Cas +{ + DDR1_CL_1_5 = 0x02, + DDR1_CL_2 = 0x04, + DDR1_CL_2_5 = 0x08, + DDR1_CL_3 = 0x10, + DDR1_CL_4 = 0x40, + DDR1_CL_FAULT +} MV_DIMM_DDR1_CAS; + +/* enumeration for DDR2 supported CAS Latencies */ +typedef enum _mvDimmDdr2Cas +{ + DDR2_CL_3 = 0x08, + DDR2_CL_4 = 0x10, + DDR2_CL_5 = 0x20, + DDR2_CL_FAULT +} MV_DIMM_DDR2_CAS; + + +typedef struct _mvDramBankInfo +{ + MV_MEMORY_TYPE memoryType; /* DDR1, DDR2 or SDRAM */ + + /* DIMM dimensions */ + MV_U32 numOfRowAddr; + MV_U32 numOfColAddr; + MV_U32 dataWidth; + MV_U32 errorCheckType; /* ECC , PARITY..*/ + MV_U32 sdramWidth; /* 4,8,16 or 32 */ + MV_U32 errorCheckDataWidth; /* 0 - no, 1 - Yes */ + MV_U32 burstLengthSupported; + MV_U32 numOfBanksOnEachDevice; + MV_U32 suportedCasLatencies; + MV_U32 refreshInterval; + + /* DIMM timing parameters */ + MV_U32 minCycleTimeAtMaxCasLatPs; + MV_U32 minCycleTimeAtMaxCasLatMinus1Ps; + MV_U32 minCycleTimeAtMaxCasLatMinus2Ps; + MV_U32 minRowPrechargeTime; + MV_U32 minRowActiveToRowActive; + MV_U32 minRasToCasDelay; + MV_U32 minRasPulseWidth; + MV_U32 minWriteRecoveryTime; /* DDR2 only */ + MV_U32 minWriteToReadCmdDelay; /* DDR2 only */ + MV_U32 minReadToPrechCmdDelay; /* DDR2 only */ + MV_U32 minRefreshToActiveCmd; /* DDR2 only */ + + /* Parameters calculated from the extracted DIMM information */ + MV_U32 size; + MV_U32 deviceDensity; /* 16,64,128,256 or 512 Mbit */ + MV_U32 numberOfDevices; + + /* DIMM attributes (MV_TRUE for yes) */ + MV_BOOL registeredAddrAndControlInputs; + +}MV_DRAM_BANK_INFO; + +/* This structure describes CPU interface address decode window */ +typedef struct _mvDramIfDecWin +{ + MV_ADDR_WIN addrWin; /* An address window*/ + MV_BOOL enable; /* Address decode window is enabled/disabled */ +}MV_DRAM_DEC_WIN; + +#include "ddr1_2/mvDram.h" + +/* mvDramIf.h API list */ +MV_VOID mvDramIfBasicAsmInit(MV_VOID); +MV_STATUS mvDramIfDetect(MV_U32 forcedCl); +MV_VOID _mvDramIfConfig(MV_VOID); + +MV_STATUS mvDramIfWinSet(MV_TARGET target, MV_DRAM_DEC_WIN *pAddrDecWin); +MV_STATUS mvDramIfWinGet(MV_TARGET target, MV_DRAM_DEC_WIN *pAddrDecWin); +MV_STATUS mvDramIfWinEnable(MV_TARGET target,MV_BOOL enable); +MV_32 mvDramIfBankSizeGet(MV_U32 bankNum); +MV_32 mvDramIfBankBaseGet(MV_U32 bankNum); +MV_32 mvDramIfSizeGet(MV_VOID); + +#if 0 +MV_STATUS mvDramIfMbusCtrlSet(MV_XBAR_TARGET *pPizzaArbArray); +MV_STATUS mvDramIfMbusToutSet(MV_U32 timeout, MV_BOOL enable); +#endif + +#endif /* __INCmvDramIfh */ diff --git a/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/mv_hal/ddr1_2/mvDramIfConfig.h b/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/mv_hal/ddr1_2/mvDramIfConfig.h new file mode 100644 index 0000000000..a7c66444ac --- /dev/null +++ b/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/mv_hal/ddr1_2/mvDramIfConfig.h @@ -0,0 +1,192 @@ +/******************************************************************************* +Copyright (C) Marvell International Ltd. and its affiliates + +This software file (the "File") is owned and distributed by Marvell +International Ltd. and/or its affiliates ("Marvell") under the following +alternative licensing terms. Once you have made an election to distribute the +File under one of the following license alternatives, please (i) delete this +introductory statement regarding license alternatives, (ii) delete the two +license alternatives that you have not elected to use and (iii) preserve the +Marvell copyright notice above. + +******************************************************************************** +Marvell Commercial License Option + +If you received this File from Marvell and you have entered into a commercial +license agreement (a "Commercial License") with Marvell, the File is licensed +to you under the terms of the applicable Commercial License. + +******************************************************************************** +Marvell GPL License Option + +If you received this File from Marvell, you may opt to use, redistribute and/or +modify this File in accordance with the terms and conditions of the General +Public License Version 2, June 1991 (the "GPL License"), a copy of which is +available along with the File in the license.txt file or by writing to the Free +Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or +on the worldwide web at http://www.gnu.org/licenses/gpl.txt. + +THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED +WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY +DISCLAIMED. The GPL License provides additional details about this warranty +disclaimer. +******************************************************************************** +Marvell BSD License Option + +If you received this File from Marvell, you may opt to use, redistribute and/or +modify this File under the following licensing terms. +Redistribution and use in source and binary forms, with or without modification, +are permitted provided that the following conditions are met: + + * Redistributions of source code must retain the above copyright notice, + this list of conditions and the following disclaimer. + + * Redistributions in binary form must reproduce the above copyright + notice, this list of conditions and the following disclaimer in the + documentation and/or other materials provided with the distribution. + + * Neither the name of Marvell nor the names of its contributors may be + used to endorse or promote products derived from this software without + specific prior written permission. + +THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND +ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED +WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE +DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR +ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES +(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; +LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON +ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS +SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + +*******************************************************************************/ + + +#ifndef __INCmvDramIfConfigh +#define __INCmvDramIfConfigh + +/* includes */ + +/* defines */ + +/* registers defaults values */ + +#define SDRAM_CONFIG_DV \ + (SDRAM_PERR_WRITE | \ + SDRAM_SRMODE | \ + SDRAM_SRCLK_GATED) + +#define SDRAM_DUNIT_CTRL_LOW_DV \ + (SDRAM_CTRL_POS_RISE | \ + SDRAM_CLK1DRV_NORMAL | \ + SDRAM_LOCKEN_ENABLE) + +#define SDRAM_ADDR_CTRL_DV 0 + +#define SDRAM_TIMING_CTRL_LOW_REG_DV \ + ((0x2 << SDRAM_TRCD_OFFS) | \ + (0x2 << SDRAM_TRP_OFFS) | \ + (0x1 << SDRAM_TWR_OFFS) | \ + (0x0 << SDRAM_TWTR_OFFS) | \ + (0x5 << SDRAM_TRAS_OFFS) | \ + (0x1 << SDRAM_TRRD_OFFS)) +/* TRFC 0x27, TW2W 0x1 */ +#define SDRAM_TIMING_CTRL_HIGH_REG_DV (( 0x7 << SDRAM_TRFC_OFFS ) |\ + ( 0x2 << SDRAM_TRFC_EXT_OFFS) |\ + ( 0x1 << SDRAM_TW2W_OFFS)) + +#define SDRAM_OPEN_PAGES_CTRL_REG_DV SDRAM_OPEN_PAGE_EN + +/* DDR2 ODT default register values */ + +/* Presence Ctrl Low Ctrl High Dunit Ctrl Ext Mode */ +/* CS0 0x84210000 0x00000000 0x0000780F 0x00000440 */ +/* CS0+CS1 0x84210000 0x00000000 0x0000780F 0x00000440 */ +/* CS0+CS2 0x030C030C 0x00000000 0x0000740F 0x00000404 */ +/* CS0+CS1+CS2 0x030C030C 0x00000000 0x0000740F 0x00000404 */ +/* CS0+CS2+CS3 0x030C030C 0x00000000 0x0000740F 0x00000404 */ +/* CS0+CS1+CS2+CS3 0x030C030C 0x00000000 0x0000740F 0x00000404 */ + +#define DDR2_ODT_CTRL_LOW_CS0_DV 0x84210000 +#define DDR2_ODT_CTRL_HIGH_CS0_DV 0x00000000 +#define DDR2_DUNIT_ODT_CTRL_CS0_DV 0x0000780F +#define DDR_SDRAM_EXT_MODE_CS0_DV 0x00000440 + +#define DDR2_ODT_CTRL_LOW_CS0_CS2_DV 0x030C030C +#define DDR2_ODT_CTRL_HIGH_CS0_CS2_DV 0x00000000 +#define DDR2_DUNIT_ODT_CTRL_CS0_CS2_DV 0x0000740F +#define DDR_SDRAM_EXT_MODE_CS0_CS2_DV 0x00000404 + + +/* DDR SDRAM Adderss/Control and Data Pads Calibration default values */ +#define DDR1_ADDR_CTRL_PAD_STRENGTH_TYPICAL_DV \ + (1 << SDRAM_PRE_DRIVER_STRENGTH_OFFS) +#define DDR2_ADDR_CTRL_PAD_STRENGTH_TYPICAL_DV \ + (3 << SDRAM_PRE_DRIVER_STRENGTH_OFFS) + + +#define DDR1_DATA_PAD_STRENGTH_TYPICAL_DV \ + (1 << SDRAM_PRE_DRIVER_STRENGTH_OFFS) +#define DDR2_DATA_PAD_STRENGTH_TYPICAL_DV \ + (3 << SDRAM_PRE_DRIVER_STRENGTH_OFFS) + +/* DDR SDRAM Mode Register default value */ +#define DDR1_MODE_REG_DV 0x00000000 +#define DDR2_MODE_REG_DV 0x00000400 + +/* DDR SDRAM Timing parameter default values */ +#define DDR1_TIMING_LOW_DV 0x11602220 +#define DDR1_TIMING_HIGH_DV 0x0000000d + +#define DDR2_TIMING_LOW_DV 0x11812220 +#define DDR2_TIMING_HIGH_DV 0x0000030f + +/* For Guideline (GL# MEM-4) DQS Reference Delay Tuning */ +#define FTDLL_DDR1_166MHZ ((0x1 << 0) | \ + (0x7F<< 12) | \ + (0x1 << 22)) + +#define FTDLL_DDR1_133MHZ FTDLL_DDR1_166MHZ + +#define FTDLL_DDR1_200MHZ ((0x1 << 0) | \ + (0x1 << 12) | \ + (0x3 << 14) | \ + (0x1 << 18) | \ + (0x1 << 22)) + + +#define FTDLL_DDR2_166MHZ ((0x1 << 0) | \ + (0x1 << 12) | \ + (0x1 << 14) | \ + (0x1 << 16) | \ + (0x1 << 19) | \ + (0xF << 20)) + +#define FTDLL_DDR2_133MHZ FTDLL_DDR2_166MHZ + +#define FTDLL_DDR2_200MHZ ((0x1 << 0) | \ + (0x1 << 12) | \ + (0x1 << 14) | \ + (0x1 << 16) | \ + (0x1 << 19) | \ + (0xF << 20)) + +#define FTDLL_DDR2_250MHZ 0x445001 + +/* Orion 1 B1 and above */ +#define FTDLL_DDR1_166MHZ_5181_B1 0x45D001 + +/* Orion nas */ +#define FTDLL_DDR2_166MHZ_5182 0x597001 + +/* Orion 2 D0 and above */ +#define FTDLL_DDR1_166MHZ_5281_D0 0x8D0001 +#define FTDLL_DDR1_200MHZ_5281_D0 0x8D0001 +#define FTDLL_DDR2_166MHZ_5281_D0 0x485001 +#define FTDLL_DDR2_200MHZ_5281_D0 0x485001 +#define FTDLL_DDR2_250MHZ_5281_D0 0x445001 +#define FTDLL_DDR2_200MHZ_5281_D1 0x995001 +#define FTDLL_DDR2_250MHZ_5281_D1 0x984801 + +#endif /* __INCmvDramIfh */ diff --git a/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/mv_hal/ddr1_2/mvDramIfRegs.h b/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/mv_hal/ddr1_2/mvDramIfRegs.h new file mode 100644 index 0000000000..e9cd7c4e5d --- /dev/null +++ b/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/mv_hal/ddr1_2/mvDramIfRegs.h @@ -0,0 +1,306 @@ +/******************************************************************************* +Copyright (C) Marvell International Ltd. and its affiliates + +This software file (the "File") is owned and distributed by Marvell +International Ltd. and/or its affiliates ("Marvell") under the following +alternative licensing terms. Once you have made an election to distribute the +File under one of the following license alternatives, please (i) delete this +introductory statement regarding license alternatives, (ii) delete the two +license alternatives that you have not elected to use and (iii) preserve the +Marvell copyright notice above. + +******************************************************************************** +Marvell Commercial License Option + +If you received this File from Marvell and you have entered into a commercial +license agreement (a "Commercial License") with Marvell, the File is licensed +to you under the terms of the applicable Commercial License. + +******************************************************************************** +Marvell GPL License Option + +If you received this File from Marvell, you may opt to use, redistribute and/or +modify this File in accordance with the terms and conditions of the General +Public License Version 2, June 1991 (the "GPL License"), a copy of which is +available along with the File in the license.txt file or by writing to the Free +Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or +on the worldwide web at http://www.gnu.org/licenses/gpl.txt. + +THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED +WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY +DISCLAIMED. The GPL License provides additional details about this warranty +disclaimer. +******************************************************************************** +Marvell BSD License Option + +If you received this File from Marvell, you may opt to use, redistribute and/or +modify this File under the following licensing terms. +Redistribution and use in source and binary forms, with or without modification, +are permitted provided that the following conditions are met: + + * Redistributions of source code must retain the above copyright notice, + this list of conditions and the following disclaimer. + + * Redistributions in binary form must reproduce the above copyright + notice, this list of conditions and the following disclaimer in the + documentation and/or other materials provided with the distribution. + + * Neither the name of Marvell nor the names of its contributors may be + used to endorse or promote products derived from this software without + specific prior written permission. + +THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND +ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED +WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE +DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR +ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES +(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; +LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON +ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS +SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + +*******************************************************************************/ + +#ifndef __INCmvDramIfRegsh +#define __INCmvDramIfRegsh + + +/* DDR SDRAM Controller Address Decode Registers */ +/* SDRAM CSn Base Address Register (SCBAR) */ +#define SDRAM_BASE_ADDR_REG(csNum) (0x1500 + (csNum * 8)) +#define SCBAR_BASE_OFFS 16 +#define SCBAR_BASE_MASK (0xffff << SCBAR_BASE_OFFS) +#define SCBAR_BASE_ALIGNMENT 0x10000 + +/* SDRAM CSn Size Register (SCSR) */ +#define SDRAM_SIZE_REG(csNum) (0x1504 + (csNum * 8)) +#define SCSR_WIN_EN BIT0 +#define SCSR_SIZE_OFFS 16 +#define SCSR_SIZE_MASK (0xffff << SCSR_SIZE_OFFS) +#define SCSR_SIZE_ALIGNMENT 0x10000 + +/* configuration register */ +#define SDRAM_CONFIG_REG 0x1400 +#define SDRAM_REFRESH_OFFS 0 +#define SDRAM_REFRESH_MAX 0x3000 +#define SDRAM_REFRESH_MASK (SDRAM_REFRESH_MAX << SDRAM_REFRESH_OFFS) +#define SDRAM_DWIDTH_OFFS 14 +#define SDRAM_DWIDTH_MASK (3 << SDRAM_DWIDTH_OFFS) +#define SDRAM_DWIDTH_16BIT (1 << SDRAM_DWIDTH_OFFS) +#define SDRAM_DWIDTH_32BIT (2 << SDRAM_DWIDTH_OFFS) +#define SDRAM_DTYPE_OFFS 16 +#define SDRAM_DTYPE_MASK (1 << SDRAM_DTYPE_OFFS) +#define SDRAM_DTYPE_DDR1 (0 << SDRAM_DTYPE_OFFS) +#define SDRAM_DTYPE_DDR2 (1 << SDRAM_DTYPE_OFFS) +#define SDRAM_REGISTERED (1 << 17) +#define SDRAM_PERR_OFFS 18 +#define SDRAM_PERR_MASK (1 << SDRAM_PERR_OFFS) +#define SDRAM_PERR_NO_WRITE (0 << SDRAM_PERR_OFFS) +#define SDRAM_PERR_WRITE (1 << SDRAM_PERR_OFFS) +#define SDRAM_DCFG_OFFS 20 +#define SDRAM_DCFG_MASK (0x3 << SDRAM_DCFG_OFFS) +#define SDRAM_DCFG_X16_DEV (1 << SDRAM_DCFG_OFFS) +#define SDRAM_DCFG_X8_DEV (2 << SDRAM_DCFG_OFFS) +#define SDRAM_SRMODE (1 << 24) +#define SDRAM_SRCLK_OFFS 25 +#define SDRAM_SRCLK_MASK (1 << SDRAM_SRCLK_OFFS) +#define SDRAM_SRCLK_KEPT (0 << SDRAM_SRCLK_OFFS) +#define SDRAM_SRCLK_GATED (1 << SDRAM_SRCLK_OFFS) +#define SDRAM_CATTH_OFFS 26 +#define SDRAM_CATTHR_EN (1 << SDRAM_CATTH_OFFS) + + +/* dunit control register */ +#define SDRAM_DUNIT_CTRL_REG 0x1404 +#define SDRAM_CTRL_POS_OFFS 6 +#define SDRAM_CTRL_POS_FALL (0 << SDRAM_CTRL_POS_OFFS) +#define SDRAM_CTRL_POS_RISE (1 << SDRAM_CTRL_POS_OFFS) +#define SDRAM_CLK1DRV_OFFS 12 +#define SDRAM_CLK1DRV_MASK (1 << SDRAM_CLK1DRV_OFFS) +#define SDRAM_CLK1DRV_HIGH_Z (0 << SDRAM_CLK1DRV_OFFS) +#define SDRAM_CLK1DRV_NORMAL (1 << SDRAM_CLK1DRV_OFFS) +#define SDRAM_LOCKEN_OFFS 18 +#define SDRAM_LOCKEN_MASK (1 << SDRAM_LOCKEN_OFFS) +#define SDRAM_LOCKEN_DISABLE (0 << SDRAM_LOCKEN_OFFS) +#define SDRAM_LOCKEN_ENABLE (1 << SDRAM_LOCKEN_OFFS) +#define SDRAM_ST_BURST_DEL_OFFS 24 +#define SDRAM_ST_BURST_DEL_MAX 0xf +#define SDRAM_ST_BURST_DEL_MASK (SDRAM_ST_BURST_DEL_MAX< busClkPs) + { + mvOsOutput("Dram: ERR. Bank %d doesn't support memory clock!!!\n", i); + return MV_ERROR; + } + + /* All banks must support registry in order to activate it */ + if(bankInfo[i].registeredAddrAndControlInputs != + bankInfo[0].registeredAddrAndControlInputs) + { + mvOsOutput("Dram: ERR. different Registered settings !!!\n"); + return MV_ERROR; + } + + /* All banks must support same ECC mode */ + if(bankInfo[i].errorCheckType != + bankInfo[0].errorCheckType) + { + mvOsOutput("Dram: ERR. different ECC settings !!!\n"); + return MV_ERROR; + } + + } + else + { + if( i == 0 ) /* bank 0 doesn't exist */ + { + mvOsOutput("Dram: ERR. Fail to detect bank 0 !!!\n"); + return MV_ERROR; + } + else + { + DB(mvOsPrintf("Dram: Could not find bank %d\n", i)); + bankInfo[i].size = 0; /* Mark this bank as non exist */ + } + } + } + +#ifdef MV_INCLUDE_SDRAM_CS2 + if (bankInfo[SDRAM_CS0].size < bankInfo[SDRAM_CS2].size) + { + MV_DRAM_CS_order[0] = SDRAM_CS2; + MV_DRAM_CS_order[1] = SDRAM_CS3; + MV_DRAM_CS_order[2] = SDRAM_CS0; + MV_DRAM_CS_order[3] = SDRAM_CS1; + DRAM_CS_Order[0] = SDRAM_CS2; + DRAM_CS_Order[1] = SDRAM_CS3; + DRAM_CS_Order[2] = SDRAM_CS0; + DRAM_CS_Order[3] = SDRAM_CS1; + + } + else +#endif + { + MV_DRAM_CS_order[0] = SDRAM_CS0; + MV_DRAM_CS_order[1] = SDRAM_CS1; + DRAM_CS_Order[0] = SDRAM_CS0; + DRAM_CS_Order[1] = SDRAM_CS1; +#ifdef MV_INCLUDE_SDRAM_CS2 + MV_DRAM_CS_order[2] = SDRAM_CS2; + MV_DRAM_CS_order[3] = SDRAM_CS3; + DRAM_CS_Order[2] = SDRAM_CS2; + DRAM_CS_Order[3] = SDRAM_CS3; +#endif + } + + for(j = 0; j < MV_DRAM_MAX_CS; j++) + { + i = MV_DRAM_CS_order[j]; + + if (0 == bankInfo[i].size) + continue; + + /* Init the CPU window decode */ + /* Note that the Dimm width might be different then the device DRAM width */ +#ifdef MV78XX0 + temp = MV_REG_READ(SDRAM_CONFIG_REG); + deviceW = ((temp & SDRAM_DWIDTH_MASK) == SDRAM_DWIDTH_32BIT )? 32 : 64; +#else + deviceW = 16 /* KW family */; +#endif + dimmW = bankInfo[0].dataWidth - (bankInfo[0].dataWidth % 16); + size = ((bankInfo[i].size << 20) / (dimmW/deviceW)); + + /* We can not change DRAM window settings while excecuting */ + /* code from it. That is why we skip the DRAM CS[0], saving */ + /* it to the ROM configuration routine */ + + numOfAllDevices += bankInfo[i].numberOfDevices; + if (i == MV_DRAM_CS_order[0]) + { + MV_U32 sizeToReg; + /* Translate the given window size to register format */ + sizeToReg = ctrlSizeToReg(size, SCSR_SIZE_ALIGNMENT); + /* Size parameter validity check. */ + if (-1 == sizeToReg) + { + mvOsOutput("DRAM: mvCtrlAddrDecToReg: ERR. Win %d size invalid.\n" + ,i); + return MV_BAD_PARAM; + } + + DB(mvOsPrintf("Dram: Bank 0 Size - %x\n",sizeToReg);) + sizeToReg = (sizeToReg << SCSR_SIZE_OFFS); + sizeToReg |= SCSR_WIN_EN; + MV_REG_WRITE(DRAM_BUF_REG0, sizeToReg); + } + else + { + dramDecWin.addrWin.baseLow = base; + dramDecWin.addrWin.size = size; + dramDecWin.enable = MV_TRUE; + DB(mvOsPrintf("Dram: Enable window %d base 0x%x, size=0x%x\n",i, base, size)); + + /* Check if the DRAM size is more then 3GByte */ + if (base < 0xC0000000) + { + DB(mvOsPrintf("Dram: Enable window %d base 0x%x, size=0x%x\n",i, base, size)); + if (MV_OK != mvCpuIfTargetWinSet(i, &dramDecWin)) + { + mvOsPrintf("Dram: ERR. Fail to set bank %d!!!\n", SDRAM_CS0 + i); + return MV_ERROR; + } + } + } + + base += size; + + /* update the suportedCasLatencies mask */ + bankInfo[0].suportedCasLatencies &= bankInfo[i].suportedCasLatencies; + } + + /* calculate minimum CAS */ + minCas = minCasCalc(&bankInfo[0], &bankInfo[2], busClk, forcedCl); + if (0 == minCas) + { + mvOsOutput("Dram: Warn: Could not find CAS compatible to SysClk %dMhz\n", + (busClk / 1000000)); + + minCas = DDR2_CL_4; /* Continue with this CAS */ + mvOsOutput("Set default CAS latency 4\n"); + } + + /* calc SDRAM_CONFIG_REG and save it to temp register */ + temp = sdramConfigRegCalc(&bankInfo[0],&bankInfo[2], busClk); + if(-1 == temp) + { + mvOsOutput("Dram: ERR. sdramConfigRegCalc failed !!!\n"); + return MV_ERROR; + } + + /* check if ECC is enabled by the user */ + if(eccDisable) + { + /* turn off ECC*/ + temp &= ~BIT18; + } + DB(mvOsPrintf("Dram: sdramConfigRegCalc - %x\n",temp);) + MV_REG_WRITE(DRAM_BUF_REG1, temp); + + /* calc SDRAM_MODE_REG and save it to temp register */ + temp = sdramModeRegCalc(minCas); + if(-1 == temp) + { + mvOsOutput("Dram: ERR. sdramModeRegCalc failed !!!\n"); + return MV_ERROR; + } + DB(mvOsPrintf("Dram: sdramModeRegCalc - %x\n",temp);) + MV_REG_WRITE(DRAM_BUF_REG2, temp); + + /* calc SDRAM_EXTENDED_MODE_REG and save it to temp register */ + temp = sdramExtModeRegCalc(&bankInfo[0], busClk); + if(-1 == temp) + { + mvOsOutput("Dram: ERR. sdramExtModeRegCalc failed !!!\n"); + return MV_ERROR; + } + DB(mvOsPrintf("Dram: sdramExtModeRegCalc - %x\n",temp);) + MV_REG_WRITE(DRAM_BUF_REG10, temp); + + /* calc D_UNIT_CONTROL_LOW and save it to temp register */ + TTMode = MV_FALSE; + DB(mvOsPrintf("Dram: numOfAllDevices = %x\n",numOfAllDevices);) + if( (numOfAllDevices > 9) && (bankInfo[0].registeredAddrAndControlInputs == MV_FALSE) ) + { + if ( ( (numOfAllDevices > 9) && (busClk > MV_BOARD_SYSCLK_200MHZ) ) || + (numOfAllDevices > 18) ) + { + mvOsOutput("Enable 2T "); + TTMode = MV_TRUE; + } + } + + temp = dunitCtrlLowRegCalc(&bankInfo[0], minCas, busClk, TTMode ); + if(-1 == temp) + { + mvOsOutput("Dram: ERR. dunitCtrlLowRegCalc failed !!!\n"); + return MV_ERROR; + } + DB(mvOsPrintf("Dram: dunitCtrlLowRegCalc - %x\n",temp);) + MV_REG_WRITE(DRAM_BUF_REG3, temp); + + /* calc D_UNIT_CONTROL_HIGH and save it to temp register */ + temp = dunitCtrlHighRegCalc(&bankInfo[0], busClk); + if(-1 == temp) + { + mvOsOutput("Dram: ERR. dunitCtrlHighRegCalc failed !!!\n"); + return MV_ERROR; + } + DB(mvOsPrintf("Dram: dunitCtrlHighRegCalc - %x\n",temp);) + /* check if ECC is enabled by the user */ + if(eccDisable) + { + /* turn off sample stage if no ecc */ + temp &= ~SDRAM__D2P_EN;; + } + MV_REG_WRITE(DRAM_BUF_REG13, temp); + + /* calc SDRAM_ADDR_CTRL_REG and save it to temp register */ + temp = sdramAddrCtrlRegCalc(&bankInfo[0],&bankInfo[2]); + if(-1 == temp) + { + mvOsOutput("Dram: ERR. sdramAddrCtrlRegCalc failed !!!\n"); + return MV_ERROR; + } + DB(mvOsPrintf("Dram: sdramAddrCtrlRegCalc - %x\n",temp);) + MV_REG_WRITE(DRAM_BUF_REG4, temp); + + /* calc SDRAM_TIMING_CTRL_LOW_REG and save it to temp register */ + temp = sdramTimeCtrlLowRegCalc(&bankInfo[0], minCas, busClk); + if(-1 == temp) + { + mvOsOutput("Dram: ERR. sdramTimeCtrlLowRegCalc failed !!!\n"); + return MV_ERROR; + } + DB(mvOsPrintf("Dram: sdramTimeCtrlLowRegCalc - %x\n",temp);) + MV_REG_WRITE(DRAM_BUF_REG5, temp); + + /* calc SDRAM_TIMING_CTRL_HIGH_REG and save it to temp register */ + temp = sdramTimeCtrlHighRegCalc(&bankInfo[0], busClk); + if(-1 == temp) + { + mvOsOutput("Dram: ERR. sdramTimeCtrlHighRegCalc failed !!!\n"); + return MV_ERROR; + } + DB(mvOsPrintf("Dram: sdramTimeCtrlHighRegCalc - %x\n",temp);) + MV_REG_WRITE(DRAM_BUF_REG6, temp); + + sdramDDr2OdtConfig(bankInfo); + + /* calc DDR2_SDRAM_TIMING_LOW_REG and save it to temp register */ + temp = sdramDdr2TimeLoRegCalc(minCas); + if(-1 == temp) + { + mvOsOutput("Dram: ERR. sdramDdr2TimeLoRegCalc failed !!!\n"); + return MV_ERROR; + } + DB(mvOsPrintf("Dram: sdramDdr2TimeLoRegCalc - %x\n",temp);) + MV_REG_WRITE(DRAM_BUF_REG11, temp); + + /* calc DDR2_SDRAM_TIMING_HIGH_REG and save it to temp register */ + temp = sdramDdr2TimeHiRegCalc(minCas); + if(-1 == temp) + { + mvOsOutput("Dram: ERR. sdramDdr2TimeHiRegCalc failed !!!\n"); + return MV_ERROR; + } + DB(mvOsPrintf("Dram: sdramDdr2TimeHiRegCalc - %x\n",temp);) + MV_REG_WRITE(DRAM_BUF_REG12, temp); +#endif + + /* Note that DDR SDRAM Address/Control and Data pad calibration */ + /* settings is done in mvSdramIfConfig.s */ + + return MV_OK; +} + + +/******************************************************************************* +* mvDramIfBankBaseGet - Get DRAM interface bank base. +* +* DESCRIPTION: +* This function returns the 32 bit base address of a given DRAM bank. +* +* INPUT: +* bankNum - Bank number. +* +* OUTPUT: +* None. +* +* RETURN: +* DRAM bank size. If bank is disabled or paramter is invalid, the +* function returns -1. +* +*******************************************************************************/ +MV_U32 mvDramIfBankBaseGet(MV_U32 bankNum) +{ + DB(mvOsPrintf("Dram: mvDramIfBankBaseGet Bank %d base addr is %x \n", + bankNum, mvCpuIfTargetWinBaseLowGet(SDRAM_CS0 + bankNum))); + return mvCpuIfTargetWinBaseLowGet(SDRAM_CS0 + bankNum); +} + +/******************************************************************************* +* mvDramIfBankSizeGet - Get DRAM interface bank size. +* +* DESCRIPTION: +* This function returns the size of a given DRAM bank. +* +* INPUT: +* bankNum - Bank number. +* +* OUTPUT: +* None. +* +* RETURN: +* DRAM bank size. If bank is disabled the function return '0'. In case +* or paramter is invalid, the function returns -1. +* +*******************************************************************************/ +MV_U32 mvDramIfBankSizeGet(MV_U32 bankNum) +{ + DB(mvOsPrintf("Dram: mvDramIfBankSizeGet Bank %d size is %x \n", + bankNum, mvCpuIfTargetWinSizeGet(SDRAM_CS0 + bankNum))); + return mvCpuIfTargetWinSizeGet(SDRAM_CS0 + bankNum); +} + + +/******************************************************************************* +* mvDramIfSizeGet - Get DRAM interface total size. +* +* DESCRIPTION: +* This function get the DRAM total size. +* +* INPUT: +* None. +* +* OUTPUT: +* None. +* +* RETURN: +* DRAM total size. In case or paramter is invalid, the function +* returns -1. +* +*******************************************************************************/ +MV_U32 mvDramIfSizeGet(MV_VOID) +{ + MV_U32 size = 0, i; + + for(i = 0; i < MV_DRAM_MAX_CS; i++) + size += mvDramIfBankSizeGet(i); + + DB(mvOsPrintf("Dram: mvDramIfSizeGet size is %x \n",size)); + return size; +} + +/******************************************************************************* +* mvDramIfSingleBitErrThresholdSet - Set single bit ECC threshold. +* +* DESCRIPTION: +* The ECC single bit error threshold is the number of single bit +* errors to happen before the Dunit generates an interrupt. +* This function set single bit ECC threshold. +* +* INPUT: +* threshold - threshold. +* +* OUTPUT: +* None. +* +* RETURN: +* MV_BAD_PARAM if threshold is to big, MV_OK otherwise. +* +*******************************************************************************/ +MV_STATUS mvDramIfSingleBitErrThresholdSet(MV_U32 threshold) +{ + MV_U32 regVal; + + if (threshold > SECR_THRECC_MAX) + { + return MV_BAD_PARAM; + } + + regVal = MV_REG_READ(SDRAM_ECC_CONTROL_REG); + regVal &= ~SECR_THRECC_MASK; + regVal |= ((SECR_THRECC(threshold) & SECR_THRECC_MASK)); + MV_REG_WRITE(SDRAM_ECC_CONTROL_REG, regVal); + + return MV_OK; +} + +#ifndef MV_STATIC_DRAM_ON_BOARD +/******************************************************************************* +* minCasCalc - Calculate the Minimum CAS latency which can be used. +* +* DESCRIPTION: +* Calculate the minimum CAS latency that can be used, base on the DRAM +* parameters and the SDRAM bus Clock freq. +* +* INPUT: +* busClk - the DRAM bus Clock. +* pBankInfo - bank info parameters. +* forcedCl - Forced CAS Latency multiplied by 10. If equal to zero, do not force. +* +* OUTPUT: +* None +* +* RETURN: +* The minimum CAS Latency. The function returns 0 if max CAS latency +* supported by banks is incompatible with system bus clock frequancy. +* +*******************************************************************************/ + +static MV_U32 minCasCalc(MV_DRAM_BANK_INFO *pBankInfo,MV_DRAM_BANK_INFO *pBankInfo2, MV_U32 busClk, MV_U32 forcedCl) +{ + MV_U32 count = 1, j; + MV_U32 busClkPs = 1000000000 / (busClk / 1000); /* in ps units */ + MV_U32 startBit, stopBit; + MV_U32 minCas0 = 0, minCas2 = 0; + + + /* DDR 2: + *******-******-******-******-******-******-******-******* + * bit7 | bit6 | bit5 | bit4 | bit3 | bit2 | bit1 | bit0 * + *******-******-******-******-******-******-******-******* + CAS = * TBD | TBD | 5 | 4 | 3 | 2 | TBD | TBD * + Disco VI= * TBD | TBD | 5 | 4 | 3 | TBD | TBD | TBD * + Disco Duo= * TBD | 6 | 5 | 4 | 3 | TBD | TBD | TBD * + *********************************************************/ + + + /* If we are asked to use the forced CAL we change the suported CAL to be forcedCl only */ + if (forcedCl) + { + mvOsOutput("DRAM: Using forced CL %d.%d\n", (forcedCl / 10), (forcedCl % 10)); + + if (forcedCl == 30) + pBankInfo->suportedCasLatencies = 0x08; + else if (forcedCl == 40) + pBankInfo->suportedCasLatencies = 0x10; + else if (forcedCl == 50) + pBankInfo->suportedCasLatencies = 0x20; + else if (forcedCl == 60) + pBankInfo->suportedCasLatencies = 0x40; + else + { + mvOsPrintf("Forced CL %d.%d not supported. Set default CL 4\n", + (forcedCl / 10), (forcedCl % 10)); + pBankInfo->suportedCasLatencies = 0x10; + } + + return pBankInfo->suportedCasLatencies; + } + + /* go over the supported cas mask from Max Cas down and check if the */ + /* SysClk stands in its time requirments. */ + + DB(mvOsPrintf("Dram: minCasCalc supported mask = %x busClkPs = %x \n", + pBankInfo->suportedCasLatencies,busClkPs )); + count = 1; + for(j = 7; j > 0; j--) + { + if((pBankInfo->suportedCasLatencies >> j) & BIT0 ) + { + /* Reset the bits for CL incompatible for the sysClk */ + switch (count) + { + case 1: + if (pBankInfo->minCycleTimeAtMaxCasLatPs > busClkPs) + pBankInfo->suportedCasLatencies &= ~(BIT0 << j); + count++; + break; + case 2: + if (pBankInfo->minCycleTimeAtMaxCasLatMinus1Ps > busClkPs) + pBankInfo->suportedCasLatencies &= ~(BIT0 << j); + count++; + break; + case 3: + if (pBankInfo->minCycleTimeAtMaxCasLatMinus2Ps > busClkPs) + pBankInfo->suportedCasLatencies &= ~(BIT0 << j); + count++; + break; + default: + pBankInfo->suportedCasLatencies &= ~(BIT0 << j); + break; + } + } + } + + DB(mvOsPrintf("Dram: minCasCalc support = %x (after SysCC calc)\n", + pBankInfo->suportedCasLatencies )); + + count = 1; + DB(mvOsPrintf("Dram2: minCasCalc supported mask = %x busClkPs = %x \n", + pBankInfo2->suportedCasLatencies,busClkPs )); + for(j = 7; j > 0; j--) + { + if((pBankInfo2->suportedCasLatencies >> j) & BIT0 ) + { + /* Reset the bits for CL incompatible for the sysClk */ + switch (count) + { + case 1: + if (pBankInfo2->minCycleTimeAtMaxCasLatPs > busClkPs) + pBankInfo2->suportedCasLatencies &= ~(BIT0 << j); + count++; + break; + case 2: + if (pBankInfo2->minCycleTimeAtMaxCasLatMinus1Ps > busClkPs) + pBankInfo2->suportedCasLatencies &= ~(BIT0 << j); + count++; + break; + case 3: + if (pBankInfo2->minCycleTimeAtMaxCasLatMinus2Ps > busClkPs) + pBankInfo2->suportedCasLatencies &= ~(BIT0 << j); + count++; + break; + default: + pBankInfo2->suportedCasLatencies &= ~(BIT0 << j); + break; + } + } + } + + DB(mvOsPrintf("Dram2: minCasCalc support = %x (after SysCC calc)\n", + pBankInfo2->suportedCasLatencies )); + + startBit = 3; /* DDR2 support CL start with CL3 (bit 3) */ + stopBit = 6; /* DDR2 support CL stops with CL6 (bit 6) */ + + for(j = startBit; j <= stopBit ; j++) + { + if((pBankInfo->suportedCasLatencies >> j) & BIT0 ) + { + DB(mvOsPrintf("Dram: minCasCalc choose CAS %x \n",(BIT0 << j))); + minCas0 = (BIT0 << j); + break; + } + } + + for(j = startBit; j <= stopBit ; j++) + { + if((pBankInfo2->suportedCasLatencies >> j) & BIT0 ) + { + DB(mvOsPrintf("Dram: minCasCalc choose CAS %x \n",(BIT0 << j))); + minCas2 = (BIT0 << j); + break; + } + } + + if (minCas2 > minCas0) + return minCas2; + else + return minCas0; + + return 0; +} + +/******************************************************************************* +* sdramConfigRegCalc - Calculate sdram config register +* +* DESCRIPTION: Calculate sdram config register optimized value based +* on the bank info parameters. +* +* INPUT: +* busClk - the DRAM bus Clock. +* pBankInfo - sdram bank parameters +* +* OUTPUT: +* None +* +* RETURN: +* sdram config reg value. +* +*******************************************************************************/ +static MV_U32 sdramConfigRegCalc(MV_DRAM_BANK_INFO *pBankInfo,MV_DRAM_BANK_INFO *pBankInfo2, MV_U32 busClk) +{ + MV_U32 sdramConfig = 0; + MV_U32 refreshPeriod; + + busClk /= 1000000; /* we work with busClk in MHz */ + + sdramConfig = MV_REG_READ(SDRAM_CONFIG_REG); + + /* figure out the memory refresh internal */ + switch (pBankInfo->refreshInterval & 0xf) + { + case 0x0: /* refresh period is 15.625 usec */ + refreshPeriod = 15625; + break; + case 0x1: /* refresh period is 3.9 usec */ + refreshPeriod = 3900; + break; + case 0x2: /* refresh period is 7.8 usec */ + refreshPeriod = 7800; + break; + case 0x3: /* refresh period is 31.3 usec */ + refreshPeriod = 31300; + break; + case 0x4: /* refresh period is 62.5 usec */ + refreshPeriod = 62500; + break; + case 0x5: /* refresh period is 125 usec */ + refreshPeriod = 125000; + break; + default: /* refresh period undefined */ + mvOsPrintf("Dram: ERR. DRAM refresh period is unknown!\n"); + return -1; + } + + /* Now the refreshPeriod is in register format value */ + refreshPeriod = (busClk * refreshPeriod) / 1000; + + DB(mvOsPrintf("Dram: sdramConfigRegCalc calculated refresh interval %0x\n", + refreshPeriod)); + + /* make sure the refresh value is only 14 bits */ + if(refreshPeriod > SDRAM_REFRESH_MAX) + { + refreshPeriod = SDRAM_REFRESH_MAX; + DB(mvOsPrintf("Dram: sdramConfigRegCalc adjusted refresh interval %0x\n", + refreshPeriod)); + } + + /* Clear the refresh field */ + sdramConfig &= ~SDRAM_REFRESH_MASK; + + /* Set new value to refresh field */ + sdramConfig |= (refreshPeriod & SDRAM_REFRESH_MASK); + + /* registered DRAM ? */ + if ( pBankInfo->registeredAddrAndControlInputs ) + { + /* it's registered DRAM, so set the reg. DRAM bit */ + sdramConfig |= SDRAM_REGISTERED; + DB(mvOsPrintf("DRAM Attribute: Registered address and control inputs.\n");) + } + + /* ECC and IERR support */ + sdramConfig &= ~SDRAM_ECC_MASK; /* Clear ECC field */ + sdramConfig &= ~SDRAM_IERR_MASK; /* Clear IErr field */ + + if ( pBankInfo->errorCheckType ) + { + sdramConfig |= SDRAM_ECC_EN; + sdramConfig |= SDRAM_IERR_REPORTE; + DB(mvOsPrintf("Dram: mvDramIfDetect Enabling ECC\n")); + } + else + { + sdramConfig |= SDRAM_ECC_DIS; + sdramConfig |= SDRAM_IERR_IGNORE; + DB(mvOsPrintf("Dram: mvDramIfDetect Disabling ECC!\n")); + } + /* Set static default settings */ + sdramConfig |= SDRAM_CONFIG_DV; + + DB(mvOsPrintf("Dram: sdramConfigRegCalc set sdramConfig to 0x%x\n", + sdramConfig)); + + return sdramConfig; +} + +/******************************************************************************* +* sdramModeRegCalc - Calculate sdram mode register +* +* DESCRIPTION: Calculate sdram mode register optimized value based +* on the bank info parameters and the minCas. +* +* INPUT: +* minCas - minimum CAS supported. +* +* OUTPUT: +* None +* +* RETURN: +* sdram mode reg value. +* +*******************************************************************************/ +static MV_U32 sdramModeRegCalc(MV_U32 minCas) +{ + MV_U32 sdramMode; + + sdramMode = MV_REG_READ(SDRAM_MODE_REG); + + /* Clear CAS Latency field */ + sdramMode &= ~SDRAM_CL_MASK; + + DB(mvOsPrintf("DRAM CAS Latency ");) + + switch (minCas) + { + case DDR2_CL_3: + sdramMode |= SDRAM_DDR2_CL_3; + DB(mvOsPrintf("3.\n");) + break; + case DDR2_CL_4: + sdramMode |= SDRAM_DDR2_CL_4; + DB(mvOsPrintf("4.\n");) + break; + case DDR2_CL_5: + sdramMode |= SDRAM_DDR2_CL_5; + DB(mvOsPrintf("5.\n");) + break; + case DDR2_CL_6: + sdramMode |= SDRAM_DDR2_CL_6; + DB(mvOsPrintf("6.\n");) + break; + default: + mvOsOutput("\nsdramModeRegCalc ERROR: Max. CL out of range\n"); + return -1; + } + + DB(mvOsPrintf("\nsdramModeRegCalc register 0x%x\n", sdramMode )); + + return sdramMode; +} +/******************************************************************************* +* sdramExtModeRegCalc - Calculate sdram Extended mode register +* +* DESCRIPTION: +* Return sdram Extended mode register value based +* on the bank info parameters and bank presence. +* +* INPUT: +* pBankInfo - sdram bank parameters +* busClk - DRAM frequency +* +* OUTPUT: +* None +* +* RETURN: +* sdram Extended mode reg value. +* +*******************************************************************************/ +static MV_U32 sdramExtModeRegCalc(MV_DRAM_BANK_INFO *pBankInfo, MV_U32 busClk) +{ + MV_U32 populateBanks = 0; + int bankNum; + + /* Represent the populate banks in binary form */ + for(bankNum = 0; bankNum < MV_DRAM_MAX_CS; bankNum++) + { + if (0 != pBankInfo[bankNum].size) + { + populateBanks |= (1 << bankNum); + } + } + + switch(populateBanks) + { + case(BANK_PRESENT_CS0): + case(BANK_PRESENT_CS0_CS1): + return DDR_SDRAM_EXT_MODE_CS0_CS1_DV; + + case(BANK_PRESENT_CS0_CS2): + case(BANK_PRESENT_CS0_CS1_CS2): + case(BANK_PRESENT_CS0_CS2_CS3): + case(BANK_PRESENT_CS0_CS2_CS3_CS4): + if (busClk >= MV_BOARD_SYSCLK_267MHZ) + return DDR_SDRAM_EXT_MODE_FAST_CS0_CS1_CS2_CS3_DV; + else + return DDR_SDRAM_EXT_MODE_CS0_CS1_CS2_CS3_DV; + + default: + mvOsOutput("sdramExtModeRegCalc: Invalid DRAM bank presence\n"); + return -1; + } + return 0; +} + +/******************************************************************************* +* dunitCtrlLowRegCalc - Calculate sdram dunit control low register +* +* DESCRIPTION: Calculate sdram dunit control low register optimized value based +* on the bank info parameters and the minCas. +* +* INPUT: +* pBankInfo - sdram bank parameters +* minCas - minimum CAS supported. +* +* OUTPUT: +* None +* +* RETURN: +* sdram dunit control low reg value. +* +*******************************************************************************/ +static MV_U32 dunitCtrlLowRegCalc(MV_DRAM_BANK_INFO *pBankInfo, MV_U32 minCas, MV_U32 busClk, MV_STATUS TTMode) +{ + MV_U32 dunitCtrlLow, cl; + MV_U32 sbOutR[4]={3,5,7,9} ; + MV_U32 sbOutU[4]={1,3,5,7} ; + + dunitCtrlLow = MV_REG_READ(SDRAM_DUNIT_CTRL_REG); + + DB(mvOsPrintf("Dram: dunitCtrlLowRegCalc\n")); + + /* Clear StBurstOutDel field */ + dunitCtrlLow &= ~SDRAM_SB_OUT_MASK; + + /* Clear StBurstInDel field */ + dunitCtrlLow &= ~SDRAM_SB_IN_MASK; + + /* Clear CtrlPos field */ + dunitCtrlLow &= ~SDRAM_CTRL_POS_MASK; + + /* Clear 2T field */ + dunitCtrlLow &= ~SDRAM_2T_MASK; + if (TTMode == MV_TRUE) + { + dunitCtrlLow |= SDRAM_2T_MODE; + } + + /* For proper sample of read data set the Dunit Control register's */ + /* stBurstInDel bits [27:24] */ + /* 200MHz - 267MHz None reg = CL + 1 */ + /* 200MHz - 267MHz reg = CL + 2 */ + /* > 267MHz None reg = CL + 2 */ + /* > 267MHz reg = CL + 3 */ + + /* For proper sample of read data set the Dunit Control register's */ + /* stBurstOutDel bits [23:20] */ + /********-********-********-********- + * CL=3 | CL=4 | CL=5 | CL=6 | + *********-********-********-********- + Not Reg. * 0001 | 0011 | 0101 | 0111 | + *********-********-********-********- + Registered * 0011 | 0101 | 0111 | 1001 | + *********-********-********-********/ + + /* Set Dunit Control low default value */ + dunitCtrlLow |= SDRAM_DUNIT_CTRL_LOW_DDR2_DV; + + switch (minCas) + { + case DDR2_CL_3: cl = 3; break; + case DDR2_CL_4: cl = 4; break; + case DDR2_CL_5: cl = 5; break; + case DDR2_CL_6: cl = 6; break; + default: + mvOsOutput("Dram: dunitCtrlLowRegCalc Max. CL out of range %d\n", minCas); + return -1; + } + + /* registerd DDR SDRAM? */ + if (pBankInfo->registeredAddrAndControlInputs == MV_TRUE) + { + dunitCtrlLow |= (sbOutR[cl-3]) << SDRAM_SB_OUT_DEL_OFFS; + } + else + { + dunitCtrlLow |= (sbOutU[cl-3]) << SDRAM_SB_OUT_DEL_OFFS; + } + + DB(mvOsPrintf("\n\ndunitCtrlLowRegCalc: CL = %d, frequencies=%d\n", cl, busClk)); + + if (busClk <= MV_BOARD_SYSCLK_267MHZ) + { + if (pBankInfo->registeredAddrAndControlInputs == MV_TRUE) + cl = cl + 2; + else + cl = cl + 1; + } + else + { + if (pBankInfo->registeredAddrAndControlInputs == MV_TRUE) + cl = cl + 3; + else + cl = cl + 2; + } + + DB(mvOsPrintf("dunitCtrlLowRegCalc: SDRAM_SB_IN_DEL_OFFS = %d \n", cl)); + dunitCtrlLow |= cl << SDRAM_SB_IN_DEL_OFFS; + + DB(mvOsPrintf("Dram: Reg dunit control low = %x\n", dunitCtrlLow )); + + return dunitCtrlLow; +} + +/******************************************************************************* +* dunitCtrlHighRegCalc - Calculate sdram dunit control high register +* +* DESCRIPTION: Calculate sdram dunit control high register optimized value based +* on the bus clock. +* +* INPUT: +* busClk - DRAM frequency. +* +* OUTPUT: +* None +* +* RETURN: +* sdram dunit control high reg value. +* +*******************************************************************************/ +static MV_U32 dunitCtrlHighRegCalc(MV_DRAM_BANK_INFO *pBankInfo, MV_U32 busClk) +{ + MV_U32 dunitCtrlHigh; + dunitCtrlHigh = MV_REG_READ(SDRAM_DUNIT_CTRL_HI_REG); + if(busClk > MV_BOARD_SYSCLK_300MHZ) + dunitCtrlHigh |= SDRAM__P2D_EN; + else + dunitCtrlHigh &= ~SDRAM__P2D_EN; + + if(busClk > MV_BOARD_SYSCLK_267MHZ) + dunitCtrlHigh |= (SDRAM__WR_MESH_DELAY_EN | SDRAM__PUP_ZERO_SKEW_EN | SDRAM__ADD_HALF_FCC_EN); + + /* If ECC support we turn on D2P sample */ + dunitCtrlHigh &= ~SDRAM__D2P_EN; /* Clear D2P bit */ + if (( pBankInfo->errorCheckType ) && (busClk > MV_BOARD_SYSCLK_267MHZ)) + dunitCtrlHigh |= SDRAM__D2P_EN; + + return dunitCtrlHigh; +} + +/******************************************************************************* +* sdramAddrCtrlRegCalc - Calculate sdram address control register +* +* DESCRIPTION: Calculate sdram address control register optimized value based +* on the bank info parameters and the minCas. +* +* INPUT: +* pBankInfo - sdram bank parameters +* +* OUTPUT: +* None +* +* RETURN: +* sdram address control reg value. +* +*******************************************************************************/ +static MV_U32 sdramAddrCtrlRegCalc(MV_DRAM_BANK_INFO *pBankInfo, MV_DRAM_BANK_INFO *pBankInfoDIMM1) +{ + MV_U32 addrCtrl = 0; + + if (pBankInfoDIMM1->size) + { + switch (pBankInfoDIMM1->sdramWidth) + { + case 4: /* memory is x4 */ + mvOsOutput("sdramAddrCtrlRegCalc: Error - x4 not supported!\n"); + return -1; + break; + case 8: /* memory is x8 */ + addrCtrl |= SDRAM_ADDRSEL_X8(2) | SDRAM_ADDRSEL_X8(3); + DB(mvOsPrintf("sdramAddrCtrlRegCalc: sdramAddrCtrlRegCalc SDRAM device DIMM2 width x8\n")); + break; + case 16: + addrCtrl |= SDRAM_ADDRSEL_X16(2) | SDRAM_ADDRSEL_X16(3); + DB(mvOsPrintf("sdramAddrCtrlRegCalc: sdramAddrCtrlRegCalc SDRAM device DIMM2 width x16\n")); + break; + default: /* memory width unsupported */ + mvOsOutput("sdramAddrCtrlRegCalc: ERR. DRAM chip width is unknown!\n"); + return -1; + } + } + + switch (pBankInfo->sdramWidth) + { + case 4: /* memory is x4 */ + mvOsOutput("sdramAddrCtrlRegCalc: Error - x4 not supported!\n"); + return -1; + break; + case 8: /* memory is x8 */ + addrCtrl |= SDRAM_ADDRSEL_X8(0) | SDRAM_ADDRSEL_X8(1); + DB(mvOsPrintf("sdramAddrCtrlRegCalc: sdramAddrCtrlRegCalc SDRAM device width x8\n")); + break; + case 16: + addrCtrl |= SDRAM_ADDRSEL_X16(0) | SDRAM_ADDRSEL_X16(1); + DB(mvOsPrintf("sdramAddrCtrlRegCalc: sdramAddrCtrlRegCalc SDRAM device width x16\n")); + break; + default: /* memory width unsupported */ + mvOsOutput("sdramAddrCtrlRegCalc: ERR. DRAM chip width is unknown!\n"); + return -1; + } + + /* Note that density is in MB units */ + switch (pBankInfo->deviceDensity) + { + case 256: /* 256 Mbit */ + DB(mvOsPrintf("DRAM Device Density 256Mbit\n")); + addrCtrl |= SDRAM_DSIZE_256Mb(0) | SDRAM_DSIZE_256Mb(1); + break; + case 512: /* 512 Mbit */ + DB(mvOsPrintf("DRAM Device Density 512Mbit\n")); + addrCtrl |= SDRAM_DSIZE_512Mb(0) | SDRAM_DSIZE_512Mb(1); + break; + case 1024: /* 1 Gbit */ + DB(mvOsPrintf("DRAM Device Density 1Gbit\n")); + addrCtrl |= SDRAM_DSIZE_1Gb(0) | SDRAM_DSIZE_1Gb(1); + break; + case 2048: /* 2 Gbit */ + DB(mvOsPrintf("DRAM Device Density 2Gbit\n")); + addrCtrl |= SDRAM_DSIZE_2Gb(0) | SDRAM_DSIZE_2Gb(1); + break; + default: + mvOsOutput("Dram: sdramAddrCtrl unsupported RAM-Device size %d\n", + pBankInfo->deviceDensity); + return -1; + } + + if (pBankInfoDIMM1->size) + { + switch (pBankInfoDIMM1->deviceDensity) + { + case 256: /* 256 Mbit */ + DB(mvOsPrintf("DIMM2: DRAM Device Density 256Mbit\n")); + addrCtrl |= SDRAM_DSIZE_256Mb(2) | SDRAM_DSIZE_256Mb(3); + break; + case 512: /* 512 Mbit */ + DB(mvOsPrintf("DIMM2: DRAM Device Density 512Mbit\n")); + addrCtrl |= SDRAM_DSIZE_512Mb(2) | SDRAM_DSIZE_512Mb(3); + break; + case 1024: /* 1 Gbit */ + DB(mvOsPrintf("DIMM2: DRAM Device Density 1Gbit\n")); + addrCtrl |= SDRAM_DSIZE_1Gb(2) | SDRAM_DSIZE_1Gb(3); + break; + case 2048: /* 2 Gbit */ + DB(mvOsPrintf("DIMM2: DRAM Device Density 2Gbit\n")); + addrCtrl |= SDRAM_DSIZE_2Gb(2) | SDRAM_DSIZE_2Gb(3); + break; + default: + mvOsOutput("DIMM2: Dram: sdramAddrCtrl unsupported RAM-Device size %d\n", + pBankInfoDIMM1->deviceDensity); + return -1; + } + } + /* SDRAM address control */ + DB(mvOsPrintf("Dram: setting sdram address control with: %x \n", addrCtrl)); + + return addrCtrl; +} + +/******************************************************************************* +* sdramTimeCtrlLowRegCalc - Calculate sdram timing control low register +* +* DESCRIPTION: +* This function calculates sdram timing control low register +* optimized value based on the bank info parameters and the minCas. +* +* INPUT: +* pBankInfo - sdram bank parameters +* minCas - minimum CAS supported. +* busClk - Bus clock +* +* OUTPUT: +* None +* +* RETURN: +* sdram timing control low reg value. +* +*******************************************************************************/ +static MV_U32 sdramTimeCtrlLowRegCalc(MV_DRAM_BANK_INFO *pBankInfo, MV_U32 minCas, MV_U32 busClk) +{ + MV_U32 tRp = 0; + MV_U32 tRrd = 0; + MV_U32 tRcd = 0; + MV_U32 tRas = 0; + MV_U32 tWr = 0; + MV_U32 tWtr = 0; + MV_U32 tRtp = 0; + MV_U32 timeCtrlLow = 0; + + MV_U32 bankNum; + + busClk = busClk / 1000000; /* In MHz */ + + /* Scan all DRAM banks to find maximum timing values */ + for (bankNum = 0; bankNum < MV_DRAM_MAX_CS; bankNum++) + { + tRp = MV_MAX(tRp, pBankInfo[bankNum].minRowPrechargeTime); + tRrd = MV_MAX(tRrd, pBankInfo[bankNum].minRowActiveToRowActive); + tRcd = MV_MAX(tRcd, pBankInfo[bankNum].minRasToCasDelay); + tRas = MV_MAX(tRas, pBankInfo[bankNum].minRasPulseWidth); + } + + /* Extract timing (in ns) from SPD value. We ignore the tenth ns part. */ + /* by shifting the data two bits right. */ + tRp = tRp >> 2; /* For example 0x50 -> 20ns */ + tRrd = tRrd >> 2; + tRcd = tRcd >> 2; + + /* Extract clock cycles from time parameter. We need to round up */ + tRp = ((busClk * tRp) / 1000) + (((busClk * tRp) % 1000) ? 1 : 0); + DB(mvOsPrintf("Dram Timing Low: tRp = %d ", tRp)); + tRrd = ((busClk * tRrd) / 1000) + (((busClk * tRrd) % 1000) ? 1 : 0); + /* JEDEC min reqeirments tRrd = 2 */ + if (tRrd < 2) + tRrd = 2; + DB(mvOsPrintf("tRrd = %d ", tRrd)); + tRcd = ((busClk * tRcd) / 1000) + (((busClk * tRcd) % 1000) ? 1 : 0); + DB(mvOsPrintf("tRcd = %d ", tRcd)); + tRas = ((busClk * tRas) / 1000) + (((busClk * tRas) % 1000) ? 1 : 0); + DB(mvOsPrintf("tRas = %d ", tRas)); + + /* tWr and tWtr is different for DDR1 and DDR2. tRtp is only for DDR2 */ + /* Scan all DRAM banks to find maximum timing values */ + for (bankNum = 0; bankNum < MV_DRAM_MAX_CS; bankNum++) + { + tWr = MV_MAX(tWr, pBankInfo[bankNum].minWriteRecoveryTime); + tWtr = MV_MAX(tWtr, pBankInfo[bankNum].minWriteToReadCmdDelay); + tRtp = MV_MAX(tRtp, pBankInfo[bankNum].minReadToPrechCmdDelay); + } + + /* Extract timing (in ns) from SPD value. We ignore the tenth ns */ + /* part by shifting the data two bits right. */ + tWr = tWr >> 2; /* For example 0x50 -> 20ns */ + tWtr = tWtr >> 2; + tRtp = tRtp >> 2; + /* Extract clock cycles from time parameter. We need to round up */ + tWr = ((busClk * tWr) / 1000) + (((busClk * tWr) % 1000) ? 1 : 0); + DB(mvOsPrintf("tWr = %d ", tWr)); + tWtr = ((busClk * tWtr) / 1000) + (((busClk * tWtr) % 1000) ? 1 : 0); + /* JEDEC min reqeirments tWtr = 2 */ + if (tWtr < 2) + tWtr = 2; + DB(mvOsPrintf("tWtr = %d ", tWtr)); + tRtp = ((busClk * tRtp) / 1000) + (((busClk * tRtp) % 1000) ? 1 : 0); + /* JEDEC min reqeirments tRtp = 2 */ + if (tRtp < 2) + tRtp = 2; + DB(mvOsPrintf("tRtp = %d ", tRtp)); + + /* Note: value of 0 in register means one cycle, 1 means two and so on */ + timeCtrlLow = (((tRp - 1) << SDRAM_TRP_OFFS) | + ((tRrd - 1) << SDRAM_TRRD_OFFS) | + ((tRcd - 1) << SDRAM_TRCD_OFFS) | + (((tRas - 1) << SDRAM_TRAS_OFFS) & SDRAM_TRAS_MASK)| + ((tWr - 1) << SDRAM_TWR_OFFS) | + ((tWtr - 1) << SDRAM_TWTR_OFFS) | + ((tRtp - 1) << SDRAM_TRTP_OFFS)); + + /* Check extended tRas bit */ + if ((tRas - 1) & BIT4) + timeCtrlLow |= (1 << SDRAM_EXT_TRAS_OFFS); + + return timeCtrlLow; +} + +/******************************************************************************* +* sdramTimeCtrlHighRegCalc - Calculate sdram timing control high register +* +* DESCRIPTION: +* This function calculates sdram timing control high register +* optimized value based on the bank info parameters and the bus clock. +* +* INPUT: +* pBankInfo - sdram bank parameters +* busClk - Bus clock +* +* OUTPUT: +* None +* +* RETURN: +* sdram timing control high reg value. +* +*******************************************************************************/ +static MV_U32 sdramTimeCtrlHighRegCalc(MV_DRAM_BANK_INFO *pBankInfo, MV_U32 busClk) +{ + MV_U32 tRfc; + MV_U32 timingHigh; + MV_U32 timeNs = 0; + MV_U32 bankNum; + + busClk = busClk / 1000000; /* In MHz */ + + /* Set DDR timing high register static configuration bits */ + timingHigh = MV_REG_READ(SDRAM_TIMING_CTRL_HIGH_REG); + + /* Set DDR timing high register default value */ + timingHigh |= SDRAM_TIMING_CTRL_HIGH_REG_DV; + + /* Clear tRfc field */ + timingHigh &= ~SDRAM_TRFC_MASK; + + /* Scan all DRAM banks to find maximum timing values */ + for (bankNum = 0; bankNum < MV_DRAM_MAX_CS; bankNum++) + { + timeNs = MV_MAX(timeNs, pBankInfo[bankNum].minRefreshToActiveCmd); + DB(mvOsPrintf("Dram: Timing High: minRefreshToActiveCmd = %d\n", + pBankInfo[bankNum].minRefreshToActiveCmd)); + } + if(busClk >= 333 && mvCtrlModelGet() == MV_78XX0_A1_REV) + { + timingHigh |= 0x1 << SDRAM_TR2W_W2R_OFFS; + } + + tRfc = ((busClk * timeNs) / 1000) + (((busClk * timeNs) % 1000) ? 1 : 0); + /* Note: value of 0 in register means one cycle, 1 means two and so on */ + DB(mvOsPrintf("Dram: Timing High: tRfc = %d\n", tRfc)); + timingHigh |= (((tRfc - 1) & SDRAM_TRFC_MASK) << SDRAM_TRFC_OFFS); + DB(mvOsPrintf("Dram: Timing High: tRfc = %d\n", tRfc)); + + /* SDRAM timing high */ + DB(mvOsPrintf("Dram: setting timing high with: %x \n", timingHigh)); + + return timingHigh; +} +/******************************************************************************* +* sdramDDr2OdtConfig - Set DRAM DDR2 On Die Termination registers. +* +* DESCRIPTION: +* This function config DDR2 On Die Termination (ODT) registers. +* +* INPUT: +* pBankInfo - bank info parameters. +* +* OUTPUT: +* None +* +* RETURN: +* None +*******************************************************************************/ +static void sdramDDr2OdtConfig(MV_DRAM_BANK_INFO *pBankInfo) +{ + MV_U32 populateBanks = 0; + MV_U32 odtCtrlLow, odtCtrlHigh, dunitOdtCtrl; + int bankNum; + + /* Represent the populate banks in binary form */ + for(bankNum = 0; bankNum < MV_DRAM_MAX_CS; bankNum++) + { + if (0 != pBankInfo[bankNum].size) + { + populateBanks |= (1 << bankNum); + } + } + + switch(populateBanks) + { + case(BANK_PRESENT_CS0): + case(BANK_PRESENT_CS0_CS1): + odtCtrlLow = DDR2_ODT_CTRL_LOW_CS0_CS1_DV; + odtCtrlHigh = DDR2_ODT_CTRL_HIGH_CS0_CS1_DV; + dunitOdtCtrl = DDR2_DUNIT_ODT_CTRL_CS0_CS1_DV; + break; + case(BANK_PRESENT_CS0_CS2): + case(BANK_PRESENT_CS0_CS1_CS2): + case(BANK_PRESENT_CS0_CS2_CS3): + case(BANK_PRESENT_CS0_CS2_CS3_CS4): + odtCtrlLow = DDR2_ODT_CTRL_LOW_CS0_CS1_CS2_CS3_DV; + odtCtrlHigh = DDR2_ODT_CTRL_HIGH_CS0_CS1_CS2_CS3_DV; + dunitOdtCtrl = DDR2_DUNIT_ODT_CTRL_CS0_CS1_CS2_CS3_DV; + break; + default: + DB(mvOsPrintf("sdramDDr2OdtConfig: Invalid DRAM bank presence\n")); + return; + } + /* DDR2 SDRAM ODT ctrl low */ + DB(mvOsPrintf("Dram: DDR2 setting ODT ctrl low with: %x \n", odtCtrlLow)); + MV_REG_WRITE(DRAM_BUF_REG7, odtCtrlLow); + + /* DDR2 SDRAM ODT ctrl high */ + DB(mvOsPrintf("Dram: DDR2 setting ODT ctrl high with: %x \n", odtCtrlHigh)); + MV_REG_WRITE(DRAM_BUF_REG8, odtCtrlHigh); + + /* DDR2 DUNIT ODT ctrl */ + if ( ((mvCtrlModelGet() == MV_78XX0_DEV_ID) && (mvCtrlRevGet() == MV_78XX0_Y0_REV)) || + (mvCtrlModelGet() == MV_76100_DEV_ID) || + (mvCtrlModelGet() == MV_78100_DEV_ID) || + (mvCtrlModelGet() == MV_78200_DEV_ID) ) + dunitOdtCtrl &= ~(BIT9|BIT8); /* Clear ODT always on */ + + DB(mvOsPrintf("DUNIT: DDR2 setting ODT ctrl with: %x \n", dunitOdtCtrl)); + MV_REG_WRITE(DRAM_BUF_REG9, dunitOdtCtrl); + return; +} +/******************************************************************************* +* sdramDdr2TimeLoRegCalc - Set DDR2 DRAM Timing Low registers. +* +* DESCRIPTION: +* This function config DDR2 DRAM Timing low registers. +* +* INPUT: +* minCas - minimum CAS supported. +* +* OUTPUT: +* None +* +* RETURN: +* DDR2 sdram timing low reg value. +*******************************************************************************/ +static MV_U32 sdramDdr2TimeLoRegCalc(MV_U32 minCas) +{ + MV_U8 cl = -1; + MV_U32 ddr2TimeLoReg; + + /* read and clear the feilds we are going to set */ + ddr2TimeLoReg = MV_REG_READ(SDRAM_DDR2_TIMING_LO_REG); + ddr2TimeLoReg &= ~(SD2TLR_TODT_ON_RD_MASK | + SD2TLR_TODT_OFF_RD_MASK | + SD2TLR_TODT_ON_CTRL_RD_MASK | + SD2TLR_TODT_OFF_CTRL_RD_MASK); + + if( minCas == DDR2_CL_3 ) + { + cl = 3; + } + else if( minCas == DDR2_CL_4 ) + { + cl = 4; + } + else if( minCas == DDR2_CL_5 ) + { + cl = 5; + } + else if( minCas == DDR2_CL_6 ) + { + cl = 6; + } + else + { + DB(mvOsPrintf("sdramDdr2TimeLoRegCalc: CAS latency %d unsupported. using CAS latency 4\n", + minCas)); + cl = 4; + } + + ddr2TimeLoReg |= ((cl-3) << SD2TLR_TODT_ON_RD_OFFS); + ddr2TimeLoReg |= ( cl << SD2TLR_TODT_OFF_RD_OFFS); + ddr2TimeLoReg |= ( cl << SD2TLR_TODT_ON_CTRL_RD_OFFS); + ddr2TimeLoReg |= ((cl+3) << SD2TLR_TODT_OFF_CTRL_RD_OFFS); + + /* DDR2 SDRAM timing low */ + DB(mvOsPrintf("Dram: DDR2 setting timing low with: %x \n", ddr2TimeLoReg)); + + return ddr2TimeLoReg; +} + +/******************************************************************************* +* sdramDdr2TimeHiRegCalc - Set DDR2 DRAM Timing High registers. +* +* DESCRIPTION: +* This function config DDR2 DRAM Timing high registers. +* +* INPUT: +* minCas - minimum CAS supported. +* +* OUTPUT: +* None +* +* RETURN: +* DDR2 sdram timing high reg value. +*******************************************************************************/ +static MV_U32 sdramDdr2TimeHiRegCalc(MV_U32 minCas) +{ + MV_U8 cl = -1; + MV_U32 ddr2TimeHiReg; + + /* read and clear the feilds we are going to set */ + ddr2TimeHiReg = MV_REG_READ(SDRAM_DDR2_TIMING_HI_REG); + ddr2TimeHiReg &= ~(SD2THR_TODT_ON_WR_MASK | + SD2THR_TODT_OFF_WR_MASK | + SD2THR_TODT_ON_CTRL_WR_MASK | + SD2THR_TODT_OFF_CTRL_WR_MASK); + + if( minCas == DDR2_CL_3 ) + { + cl = 3; + } + else if( minCas == DDR2_CL_4 ) + { + cl = 4; + } + else if( minCas == DDR2_CL_5 ) + { + cl = 5; + } + else if( minCas == DDR2_CL_6 ) + { + cl = 6; + } + else + { + mvOsOutput("sdramDdr2TimeHiRegCalc: CAS latency %d unsupported. using CAS latency 4\n", + minCas); + cl = 4; + } + + ddr2TimeHiReg |= ((cl-3) << SD2THR_TODT_ON_WR_OFFS); + ddr2TimeHiReg |= ( cl << SD2THR_TODT_OFF_WR_OFFS); + ddr2TimeHiReg |= ( cl << SD2THR_TODT_ON_CTRL_WR_OFFS); + ddr2TimeHiReg |= ((cl+3) << SD2THR_TODT_OFF_CTRL_WR_OFFS); + + /* DDR2 SDRAM timin high */ + DB(mvOsPrintf("Dram: DDR2 setting timing high with: %x \n", ddr2TimeHiReg)); + + return ddr2TimeHiReg; +} +#endif + +/******************************************************************************* +* mvDramIfCalGet - Get CAS Latency +* +* DESCRIPTION: +* This function get the CAS Latency. +* +* INPUT: +* None +* +* OUTPUT: +* None +* +* RETURN: +* CAS latency times 10 (to avoid using floating point). +* +*******************************************************************************/ +MV_U32 mvDramIfCalGet(void) +{ + MV_U32 sdramCasLat, casLatMask; + + casLatMask = (MV_REG_READ(SDRAM_MODE_REG) & SDRAM_CL_MASK); + + switch (casLatMask) + { + case SDRAM_DDR2_CL_3: + sdramCasLat = 30; + break; + case SDRAM_DDR2_CL_4: + sdramCasLat = 40; + break; + case SDRAM_DDR2_CL_5: + sdramCasLat = 50; + break; + case SDRAM_DDR2_CL_6: + sdramCasLat = 60; + break; + default: + mvOsOutput("mvDramIfCalGet: Err, unknown DDR2 CAL\n"); + return -1; + } + + return sdramCasLat; +} + + +/******************************************************************************* +* mvDramIfSelfRefreshSet - Put the dram in self refresh mode - +* +* DESCRIPTION: +* add support in power management. +* +* +* INPUT: +* None +* +* OUTPUT: +* None +* +* RETURN: +* None +* +*******************************************************************************/ + +MV_VOID mvDramIfSelfRefreshSet() +{ + MV_U32 operReg; + + operReg = MV_REG_READ(SDRAM_OPERATION_REG); + MV_REG_WRITE(SDRAM_OPERATION_REG ,operReg |SDRAM_CMD_SLF_RFRSH); + /* Read until register is reset to 0 */ + while(MV_REG_READ(SDRAM_OPERATION_REG)); +} +/******************************************************************************* +* mvDramIfDimGetSPDversion - return DIMM SPD version. +* +* DESCRIPTION: +* This function prints the DRAM controller information. +* +* INPUT: +* None. +* +* OUTPUT: +* None. +* +* RETURN: +* None. +* +*******************************************************************************/ +static void mvDramIfDimGetSPDversion(MV_U32 *pMajor, MV_U32 *pMinor, MV_U32 bankNum) +{ + MV_DIMM_INFO dimmInfo; + if (bankNum >= MV_DRAM_MAX_CS ) + { + DB(mvOsPrintf("Dram: mvDramIfDimGetSPDversion bad params \n")); + return ; + } + memset(&dimmInfo,0,sizeof(dimmInfo)); + if ( MV_OK != dimmSpdGet((MV_U32)(bankNum/2), &dimmInfo)) + { + DB(mvOsPrintf("Dram: ERR dimmSpdGet failed to get dimm info \n")); + return ; + } + *pMajor = dimmInfo.spdRawData[DIMM_SPD_VERSION]/10; + *pMinor = dimmInfo.spdRawData[DIMM_SPD_VERSION]%10; +} +/******************************************************************************* +* mvDramIfShow - Show DRAM controller information. +* +* DESCRIPTION: +* This function prints the DRAM controller information. +* +* INPUT: +* None. +* +* OUTPUT: +* None. +* +* RETURN: +* None. +* +*******************************************************************************/ +void mvDramIfShow(void) +{ + int i, sdramCasLat, sdramCsSize; + MV_U32 Major=0, Minor=0; + + mvOsOutput("DRAM Controller info:\n"); + + mvOsOutput("Total DRAM "); + mvSizePrint(mvDramIfSizeGet()); + mvOsOutput("\n"); + + for(i = 0; i < MV_DRAM_MAX_CS; i++) + { + sdramCsSize = mvDramIfBankSizeGet(i); + if (sdramCsSize) + { + if (0 == (i & 1)) + { + mvDramIfDimGetSPDversion(&Major, &Minor,i); + mvOsOutput("DIMM %d version %d.%d\n", i/2, Major, Minor); + } + mvOsOutput("\tDRAM CS[%d] ", i); + mvSizePrint(sdramCsSize); + mvOsOutput("\n"); + } + } + sdramCasLat = mvDramIfCalGet(); + + if (MV_REG_READ(SDRAM_CONFIG_REG) & SDRAM_ECC_EN) + { + mvOsOutput("ECC enabled, "); + } + else + { + mvOsOutput("ECC Disabled, "); + } + + if (MV_REG_READ(SDRAM_CONFIG_REG) & SDRAM_REGISTERED) + { + mvOsOutput("Registered DIMM\n"); + } + else + { + mvOsOutput("Non registered DIMM\n"); + } + + mvOsOutput("Configured CAS Latency %d.%d\n", sdramCasLat/10, sdramCasLat%10); +} +/******************************************************************************* +* mvDramIfGetFirstCS - find the DRAM bank on the lower address +* +* +* DESCRIPTION: +* This function return the fisrt CS on address 0 +* +* INPUT: +* None. +* +* OUTPUT: +* None. +* +* RETURN: +* SDRAM_CS0 or SDRAM_CS2 +* +*******************************************************************************/ +MV_U32 mvDramIfGetFirstCS(void) +{ + MV_DRAM_BANK_INFO bankInfo[MV_DRAM_MAX_CS]; + + if (DRAM_CS_Order[0] == N_A) + { + mvDramBankInfoGet(SDRAM_CS0, &bankInfo[SDRAM_CS0]); +#ifdef MV_INCLUDE_SDRAM_CS2 + mvDramBankInfoGet(SDRAM_CS2, &bankInfo[SDRAM_CS2]); +#endif + +#ifdef MV_INCLUDE_SDRAM_CS2 + if (bankInfo[SDRAM_CS0].size < bankInfo[SDRAM_CS2].size) + { + DRAM_CS_Order[0] = SDRAM_CS2; + DRAM_CS_Order[1] = SDRAM_CS3; + DRAM_CS_Order[2] = SDRAM_CS0; + DRAM_CS_Order[3] = SDRAM_CS1; + + return SDRAM_CS2; + } +#endif + DRAM_CS_Order[0] = SDRAM_CS0; + DRAM_CS_Order[1] = SDRAM_CS1; +#ifdef MV_INCLUDE_SDRAM_CS2 + DRAM_CS_Order[2] = SDRAM_CS2; + DRAM_CS_Order[3] = SDRAM_CS3; +#endif + return SDRAM_CS0; + } + return DRAM_CS_Order[0]; +} +/******************************************************************************* +* mvDramIfGetCSorder - +* +* +* DESCRIPTION: +* This function return the fisrt CS on address 0 +* +* INPUT: +* CS number. +* +* OUTPUT: +* CS order. +* +* RETURN: +* SDRAM_CS0 or SDRAM_CS2 +* +* NOTE: mvDramIfGetFirstCS must be caled before this subroutine +*******************************************************************************/ +MV_U32 mvDramIfGetCSorder(MV_U32 csOrder ) +{ + return DRAM_CS_Order[csOrder]; +} + diff --git a/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/mv_hal/ddr2/mvDramIf.h b/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/mv_hal/ddr2/mvDramIf.h new file mode 100644 index 0000000000..23f2e540c0 --- /dev/null +++ b/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/mv_hal/ddr2/mvDramIf.h @@ -0,0 +1,172 @@ +/******************************************************************************* +Copyright (C) Marvell International Ltd. and its affiliates + +This software file (the "File") is owned and distributed by Marvell +International Ltd. and/or its affiliates ("Marvell") under the following +alternative licensing terms. Once you have made an election to distribute the +File under one of the following license alternatives, please (i) delete this +introductory statement regarding license alternatives, (ii) delete the two +license alternatives that you have not elected to use and (iii) preserve the +Marvell copyright notice above. + +******************************************************************************** +Marvell Commercial License Option + +If you received this File from Marvell and you have entered into a commercial +license agreement (a "Commercial License") with Marvell, the File is licensed +to you under the terms of the applicable Commercial License. + +******************************************************************************** +Marvell GPL License Option + +If you received this File from Marvell, you may opt to use, redistribute and/or +modify this File in accordance with the terms and conditions of the General +Public License Version 2, June 1991 (the "GPL License"), a copy of which is +available along with the File in the license.txt file or by writing to the Free +Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or +on the worldwide web at http://www.gnu.org/licenses/gpl.txt. + +THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED +WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY +DISCLAIMED. The GPL License provides additional details about this warranty +disclaimer. +******************************************************************************** +Marvell BSD License Option + +If you received this File from Marvell, you may opt to use, redistribute and/or +modify this File under the following licensing terms. +Redistribution and use in source and binary forms, with or without modification, +are permitted provided that the following conditions are met: + + * Redistributions of source code must retain the above copyright notice, + this list of conditions and the following disclaimer. + + * Redistributions in binary form must reproduce the above copyright + notice, this list of conditions and the following disclaimer in the + documentation and/or other materials provided with the distribution. + + * Neither the name of Marvell nor the names of its contributors may be + used to endorse or promote products derived from this software without + specific prior written permission. + +THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND +ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED +WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE +DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR +ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES +(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; +LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON +ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS +SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + +*******************************************************************************/ + + +#ifndef __INCmvDramIfh +#define __INCmvDramIfh + +#ifdef __cplusplus +extern "C" { +#endif /* __cplusplus */ + +/* includes */ +#include "ddr2/mvDramIfRegs.h" +#include "ddr2/mvDramIfConfig.h" +#include "ctrlEnv/mvCtrlEnvLib.h" + +/* defines */ +/* DRAM Timing parameters */ +#define SDRAM_TWR 15 /* ns tWr */ +#define SDRAM_TRFC_64_512M_AT_200MHZ 70 /* ns tRfc for dens 64-512 @ 200MHz */ +#define SDRAM_TRFC_64_512M 75 /* ns tRfc for dens 64-512 */ +#define SDRAM_TRFC_1G 120 /* ns tRfc for dens 1GB */ +#define SDRAM_TR2R_CYC 1 /* cycle for tR2r */ + +#define CAL_AUTO_DETECT 0 /* Do not force CAS latancy (mvDramIfDetect) */ +#define ECC_DISABLE 1 /* Force ECC to Disable */ +#define ECC_ENABLE 0 /* Force ECC to ENABLE */ +/* typedefs */ + +/* enumeration for memory types */ +typedef enum _mvMemoryType +{ + MEM_TYPE_SDRAM, + MEM_TYPE_DDR1, + MEM_TYPE_DDR2 +}MV_MEMORY_TYPE; + +/* enumeration for DDR2 supported CAS Latencies */ +typedef enum _mvDimmDdr2Cas +{ + DDR2_CL_3 = 0x08, + DDR2_CL_4 = 0x10, + DDR2_CL_5 = 0x20, + DDR2_CL_6 = 0x40, + DDR2_CL_FAULT +} MV_DIMM_DDR2_CAS; + + +typedef struct _mvDramBankInfo +{ + MV_MEMORY_TYPE memoryType; /* DDR1, DDR2 or SDRAM */ + + /* DIMM dimensions */ + MV_U32 numOfRowAddr; + MV_U32 numOfColAddr; + MV_U32 dataWidth; + MV_U32 errorCheckType; /* ECC , PARITY..*/ + MV_U32 sdramWidth; /* 4,8,16 or 32 */ + MV_U32 errorCheckDataWidth; /* 0 - no, 1 - Yes */ + MV_U32 burstLengthSupported; + MV_U32 numOfBanksOnEachDevice; + MV_U32 suportedCasLatencies; + MV_U32 refreshInterval; + + /* DIMM timing parameters */ + MV_U32 minCycleTimeAtMaxCasLatPs; + MV_U32 minCycleTimeAtMaxCasLatMinus1Ps; + MV_U32 minCycleTimeAtMaxCasLatMinus2Ps; + MV_U32 minRowPrechargeTime; + MV_U32 minRowActiveToRowActive; + MV_U32 minRasToCasDelay; + MV_U32 minRasPulseWidth; + MV_U32 minWriteRecoveryTime; /* DDR2 only */ + MV_U32 minWriteToReadCmdDelay; /* DDR2 only */ + MV_U32 minReadToPrechCmdDelay; /* DDR2 only */ + MV_U32 minRefreshToActiveCmd; /* DDR2 only */ + + /* Parameters calculated from the extracted DIMM information */ + MV_U32 size; + MV_U32 deviceDensity; /* 16,64,128,256 or 512 Mbit */ + MV_U32 numberOfDevices; + + /* DIMM attributes (MV_TRUE for yes) */ + MV_BOOL registeredAddrAndControlInputs; + MV_BOOL registeredDQMBinputs; + +}MV_DRAM_BANK_INFO; + +#include "ddr2/spd/mvSpd.h" + +/* mvDramIf.h API list */ +MV_VOID mvDramIfBasicAsmInit(MV_VOID); +MV_STATUS mvDramIfDetect(MV_U32 forcedCl, MV_BOOL eccDisable); +MV_VOID _mvDramIfConfig(int entryNum); + +MV_U32 mvDramIfBankSizeGet(MV_U32 bankNum); +MV_U32 mvDramIfBankBaseGet(MV_U32 bankNum); +MV_U32 mvDramIfSizeGet(MV_VOID); +MV_U32 mvDramIfCalGet(void); +MV_STATUS mvDramIfSingleBitErrThresholdSet(MV_U32 threshold); +MV_VOID mvDramIfSelfRefreshSet(void); +void mvDramIfShow(void); +MV_U32 mvDramIfGetFirstCS(void); +MV_U32 mvDramIfGetCSorder(MV_U32 csOrder ); +MV_U32 mvDramCsSizeGet(MV_U32 csNum); + +#ifdef __cplusplus +} +#endif /* __cplusplus */ + +#endif /* __INCmvDramIfh */ diff --git a/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/mv_hal/ddr2/mvDramIfConfig.h b/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/mv_hal/ddr2/mvDramIfConfig.h new file mode 100644 index 0000000000..6141c46a08 --- /dev/null +++ b/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/mv_hal/ddr2/mvDramIfConfig.h @@ -0,0 +1,157 @@ +/******************************************************************************* +Copyright (C) Marvell International Ltd. and its affiliates + +This software file (the "File") is owned and distributed by Marvell +International Ltd. and/or its affiliates ("Marvell") under the following +alternative licensing terms. Once you have made an election to distribute the +File under one of the following license alternatives, please (i) delete this +introductory statement regarding license alternatives, (ii) delete the two +license alternatives that you have not elected to use and (iii) preserve the +Marvell copyright notice above. + +******************************************************************************** +Marvell Commercial License Option + +If you received this File from Marvell and you have entered into a commercial +license agreement (a "Commercial License") with Marvell, the File is licensed +to you under the terms of the applicable Commercial License. + +******************************************************************************** +Marvell GPL License Option + +If you received this File from Marvell, you may opt to use, redistribute and/or +modify this File in accordance with the terms and conditions of the General +Public License Version 2, June 1991 (the "GPL License"), a copy of which is +available along with the File in the license.txt file or by writing to the Free +Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or +on the worldwide web at http://www.gnu.org/licenses/gpl.txt. + +THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED +WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY +DISCLAIMED. The GPL License provides additional details about this warranty +disclaimer. +******************************************************************************** +Marvell BSD License Option + +If you received this File from Marvell, you may opt to use, redistribute and/or +modify this File under the following licensing terms. +Redistribution and use in source and binary forms, with or without modification, +are permitted provided that the following conditions are met: + + * Redistributions of source code must retain the above copyright notice, + this list of conditions and the following disclaimer. + + * Redistributions in binary form must reproduce the above copyright + notice, this list of conditions and the following disclaimer in the + documentation and/or other materials provided with the distribution. + + * Neither the name of Marvell nor the names of its contributors may be + used to endorse or promote products derived from this software without + specific prior written permission. + +THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND +ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED +WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE +DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR +ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES +(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; +LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON +ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS +SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + +*******************************************************************************/ + + +#ifndef __INCmvDramIfConfigh +#define __INCmvDramIfConfigh + +#ifdef __cplusplus +extern "C" { +#endif /* __cplusplus */ + +/* includes */ + +/* defines */ + +/* registers defaults values */ + +#define SDRAM_CONFIG_DV (SDRAM_SRMODE_DRAM | BIT25 | BIT30) + +#define SDRAM_DUNIT_CTRL_LOW_DDR2_DV \ + (SDRAM_SRCLK_KEPT | \ + SDRAM_CLK1DRV_NORMAL | \ + (BIT28 | BIT29)) + +#define SDRAM_ADDR_CTRL_DV 2 + +#define SDRAM_TIMING_CTRL_LOW_REG_DV \ + ((0x2 << SDRAM_TRCD_OFFS) | \ + (0x2 << SDRAM_TRP_OFFS) | \ + (0x1 << SDRAM_TWR_OFFS) | \ + (0x0 << SDRAM_TWTR_OFFS) | \ + (0x5 << SDRAM_TRAS_OFFS) | \ + (0x1 << SDRAM_TRRD_OFFS)) + +/* Note: value of 0 in register means one cycle, 1 means two and so on */ +#define SDRAM_TIMING_CTRL_HIGH_REG_DV \ + ((0x0 << SDRAM_TR2R_OFFS) | \ + (0x0 << SDRAM_TR2W_W2R_OFFS) | \ + (0x1 << SDRAM_TW2W_OFFS)) + +#define SDRAM_OPEN_PAGES_CTRL_REG_DV SDRAM_OPEN_PAGE_EN + +/* Presence Ctrl Low Ctrl High Dunit Ctrl Ext Mode */ +/* CS0 0x84210000 0x00000000 0x0000780F 0x00000440 */ +/* CS0+CS1 0x84210000 0x00000000 0x0000780F 0x00000440 */ +/* CS0+CS2 0x030C030C 0x00000000 0x0000740F 0x00000404 */ +/* CS0+CS1+CS2 0x030C030C 0x00000000 0x0000740F 0x00000404 */ +/* CS0+CS2+CS3 0x030C030C 0x00000000 0x0000740F 0x00000404 */ +/* CS0+CS1+CS2+CS3 0x030C030C 0x00000000 0x0000740F 0x00000404 */ + +#define DDR2_ODT_CTRL_LOW_CS0_CS1_DV 0x84210000 +#define DDR2_ODT_CTRL_HIGH_CS0_CS1_DV 0x00000000 +#define DDR2_DUNIT_ODT_CTRL_CS0_CS1_DV 0x0000E80F +#ifdef MV78XX0 +#define DDR_SDRAM_EXT_MODE_CS0_CS1_DV 0x00000040 +#else +#define DDR_SDRAM_EXT_MODE_CS0_CS1_DV 0x00000440 +#endif + +#define DDR2_ODT_CTRL_LOW_CS0_CS1_CS2_CS3_DV 0x030C030C +#define DDR2_ODT_CTRL_HIGH_CS0_CS1_CS2_CS3_DV 0x00000000 +#define DDR2_DUNIT_ODT_CTRL_CS0_CS1_CS2_CS3_DV 0x0000F40F +#ifdef MV78XX0 +#define DDR_SDRAM_EXT_MODE_CS0_CS1_CS2_CS3_DV 0x00000004 +#define DDR_SDRAM_EXT_MODE_FAST_CS0_CS1_CS2_CS3_DV 0x00000044 +#else +#define DDR_SDRAM_EXT_MODE_CS0_CS1_CS2_CS3_DV 0x00000404 +#define DDR_SDRAM_EXT_MODE_FAST_CS0_CS1_CS2_CS3_DV 0x00000444 +#endif + +/* DDR SDRAM Adderss/Control and Data Pads Calibration default values */ +#define DDR2_ADDR_CTRL_PAD_STRENGTH_TYPICAL_DV \ + (3 << SDRAM_PRE_DRIVER_STRENGTH_OFFS) + +#define DDR2_DATA_PAD_STRENGTH_TYPICAL_DV \ + (3 << SDRAM_PRE_DRIVER_STRENGTH_OFFS) + +/* DDR SDRAM Mode Register default value */ +#define DDR2_MODE_REG_DV (SDRAM_BURST_LEN_4 | SDRAM_WR_3_CYC) +/* DDR SDRAM Timing parameter default values */ +#define SDRAM_TIMING_CTRL_LOW_REG_DEFAULT 0x33136552 +#define SDRAM_TRFC_DEFAULT_VALUE 0x34 +#define SDRAM_TRFC_DEFAULT SDRAM_TRFC_DEFAULT_VALUE +#define SDRAM_TW2W_DEFALT (0x1 << SDRAM_TW2W_OFFS) + +#define SDRAM_TIMING_CTRL_HIGH_REG_DEFAULT (SDRAM_TRFC_DEFAULT | SDRAM_TW2W_DEFALT) + +#define SDRAM_FTDLL_REG_DEFAULT_LEFT 0x88C800 +#define SDRAM_FTDLL_REG_DEFAULT_RIGHT 0x88C800 +#define SDRAM_FTDLL_REG_DEFAULT_UP 0x88C800 + +#ifdef __cplusplus +} +#endif /* __cplusplus */ + +#endif /* __INCmvDramIfh */ diff --git a/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/mv_hal/ddr2/mvDramIfRegs.h b/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/mv_hal/ddr2/mvDramIfRegs.h new file mode 100644 index 0000000000..369eda692b --- /dev/null +++ b/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/mv_hal/ddr2/mvDramIfRegs.h @@ -0,0 +1,423 @@ +/******************************************************************************* +Copyright (C) Marvell International Ltd. and its affiliates + +This software file (the "File") is owned and distributed by Marvell +International Ltd. and/or its affiliates ("Marvell") under the following +alternative licensing terms. Once you have made an election to distribute the +File under one of the following license alternatives, please (i) delete this +introductory statement regarding license alternatives, (ii) delete the two +license alternatives that you have not elected to use and (iii) preserve the +Marvell copyright notice above. + +******************************************************************************** +Marvell Commercial License Option + +If you received this File from Marvell and you have entered into a commercial +license agreement (a "Commercial License") with Marvell, the File is licensed +to you under the terms of the applicable Commercial License. + +******************************************************************************** +Marvell GPL License Option + +If you received this File from Marvell, you may opt to use, redistribute and/or +modify this File in accordance with the terms and conditions of the General +Public License Version 2, June 1991 (the "GPL License"), a copy of which is +available along with the File in the license.txt file or by writing to the Free +Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or +on the worldwide web at http://www.gnu.org/licenses/gpl.txt. + +THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED +WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY +DISCLAIMED. The GPL License provides additional details about this warranty +disclaimer. +******************************************************************************** +Marvell BSD License Option + +If you received this File from Marvell, you may opt to use, redistribute and/or +modify this File under the following licensing terms. +Redistribution and use in source and binary forms, with or without modification, +are permitted provided that the following conditions are met: + + * Redistributions of source code must retain the above copyright notice, + this list of conditions and the following disclaimer. + + * Redistributions in binary form must reproduce the above copyright + notice, this list of conditions and the following disclaimer in the + documentation and/or other materials provided with the distribution. + + * Neither the name of Marvell nor the names of its contributors may be + used to endorse or promote products derived from this software without + specific prior written permission. + +THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND +ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED +WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE +DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR +ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES +(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; +LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON +ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS +SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + +*******************************************************************************/ + +#ifndef __INCmvDramIfRegsh +#define __INCmvDramIfRegsh + +#ifdef __cplusplus +extern "C" { +#endif /* __cplusplus */ + +/* DDR SDRAM Controller Address Decode Registers */ + /* SDRAM CSn Base Address Register (SCBAR) */ +#define SDRAM_BASE_ADDR_REG(cpu,csNum) (0x1500 + ((csNum) * 8) + ((cpu) * 0x70)) +#define SCBAR_BASE_OFFS 16 +#define SCBAR_BASE_MASK (0xffff << SCBAR_BASE_OFFS) +#define SCBAR_BASE_ALIGNMENT 0x10000 + +/* SDRAM CSn Size Register (SCSR) */ +#define SDRAM_SIZE_REG(cpu,csNum) (0x1504 + ((csNum) * 8) + ((cpu) * 0x70)) +#define SCSR_SIZE_OFFS 24 +#define SCSR_SIZE_MASK (0xff << SCSR_SIZE_OFFS) +#define SCSR_SIZE_ALIGNMENT 0x1000000 +#define SCSR_WIN_EN BIT0 + +/* configuration register */ +#define SDRAM_CONFIG_REG (DRAM_BASE + 0x1400) +#define SDRAM_REFRESH_OFFS 0 +#define SDRAM_REFRESH_MAX 0x3FFF +#define SDRAM_REFRESH_MASK (SDRAM_REFRESH_MAX << SDRAM_REFRESH_OFFS) +#define SDRAM_DWIDTH_OFFS 15 +#define SDRAM_DWIDTH_MASK (1 << SDRAM_DWIDTH_OFFS) +#define SDRAM_DWIDTH_32BIT (0 << SDRAM_DWIDTH_OFFS) +#define SDRAM_DWIDTH_64BIT (1 << SDRAM_DWIDTH_OFFS) +#define SDRAM_REGISTERED (1 << 17) +#define SDRAM_ECC_OFFS 18 +#define SDRAM_ECC_MASK (1 << SDRAM_ECC_OFFS) +#define SDRAM_ECC_DIS (0 << SDRAM_ECC_OFFS) +#define SDRAM_ECC_EN (1 << SDRAM_ECC_OFFS) +#define SDRAM_IERR_OFFS 19 +#define SDRAM_IERR_MASK (1 << SDRAM_IERR_OFFS) +#define SDRAM_IERR_REPORTE (0 << SDRAM_IERR_OFFS) +#define SDRAM_IERR_IGNORE (1 << SDRAM_IERR_OFFS) +#define SDRAM_SRMODE_OFFS 24 +#define SDRAM_SRMODE_MASK (1 << SDRAM_SRMODE_OFFS) +#define SDRAM_SRMODE_POWER (0 << SDRAM_SRMODE_OFFS) +#define SDRAM_SRMODE_DRAM (1 << SDRAM_SRMODE_OFFS) + +/* dunit control low register */ +#define SDRAM_DUNIT_CTRL_REG (DRAM_BASE + 0x1404) +#define SDRAM_2T_OFFS 4 +#define SDRAM_2T_MASK (1 << SDRAM_2T_OFFS) +#define SDRAM_2T_MODE (1 << SDRAM_2T_OFFS) + +#define SDRAM_SRCLK_OFFS 5 +#define SDRAM_SRCLK_MASK (1 << SDRAM_SRCLK_OFFS) +#define SDRAM_SRCLK_KEPT (0 << SDRAM_SRCLK_OFFS) +#define SDRAM_SRCLK_GATED (1 << SDRAM_SRCLK_OFFS) +#define SDRAM_CTRL_POS_OFFS 6 +#define SDRAM_CTRL_POS_MASK (1 << SDRAM_CTRL_POS_OFFS) +#define SDRAM_CTRL_POS_FALL (0 << SDRAM_CTRL_POS_OFFS) +#define SDRAM_CTRL_POS_RISE (1 << SDRAM_CTRL_POS_OFFS) +#define SDRAM_CLK1DRV_OFFS 12 +#define SDRAM_CLK1DRV_MASK (1 << SDRAM_CLK1DRV_OFFS) +#define SDRAM_CLK1DRV_HIGH_Z (0 << SDRAM_CLK1DRV_OFFS) +#define SDRAM_CLK1DRV_NORMAL (1 << SDRAM_CLK1DRV_OFFS) +#define SDRAM_CLK2DRV_OFFS 13 +#define SDRAM_CLK2DRV_MASK (1 << SDRAM_CLK2DRV_OFFS) +#define SDRAM_CLK2DRV_HIGH_Z (0 << SDRAM_CLK2DRV_OFFS) +#define SDRAM_CLK2DRV_NORMAL (1 << SDRAM_CLK2DRV_OFFS) +#define SDRAM_SB_OUT_DEL_OFFS 20 +#define SDRAM_SB_OUT_DEL_MAX 0xf +#define SDRAM_SB_OUT_MASK (SDRAM_SB_OUT_DEL_MAX<= MV_DRAM_MAX_CS )) + { + DB(mvOsPrintf("Dram: mvDramBankInfoGet bad params \n")); + return MV_BAD_PARAM; + } + memset(pBankInfo, 0, sizeof(*pBankInfo)); + + if ( MV_OK != dimmSpdGet((MV_U32)(bankNum/2), &dimmInfo)) + { + DB(mvOsPrintf("Dram: ERR dimmSpdGet failed to get dimm info \n")); + return MV_FAIL; + } + if ((dimmInfo.numOfModuleBanks == 1) && ((bankNum % 2) == 1)) + { + DB(mvOsPrintf("Dram: ERR dimmSpdGet. Can't find DIMM bank 2 \n")); + return MV_FAIL; + } + /* convert Dimm info to Bank info */ + cpyDimm2BankInfo(&dimmInfo, pBankInfo); + return MV_OK; +} + +/******************************************************************************* +* cpyDimm2BankInfo - Convert a Dimm info struct into a bank info struct. +* +* DESCRIPTION: +* Convert a Dimm info struct into a bank info struct. +* +* INPUT: +* pDimmInfo - DIMM information structure. +* +* OUTPUT: +* pBankInfo - DRAM bank information struct. +* +* RETURN: +* None. +* +*******************************************************************************/ +static MV_VOID cpyDimm2BankInfo(MV_DIMM_INFO *pDimmInfo, + MV_DRAM_BANK_INFO *pBankInfo) +{ + pBankInfo->memoryType = pDimmInfo->memoryType; + + /* DIMM dimensions */ + pBankInfo->numOfRowAddr = pDimmInfo->numOfRowAddr; + pBankInfo->numOfColAddr = pDimmInfo->numOfColAddr; + pBankInfo->dataWidth = pDimmInfo->dataWidth; + pBankInfo->errorCheckType = pDimmInfo->errorCheckType; + pBankInfo->sdramWidth = pDimmInfo->sdramWidth; + pBankInfo->errorCheckDataWidth = pDimmInfo->errorCheckDataWidth; + pBankInfo->numOfBanksOnEachDevice = pDimmInfo->numOfBanksOnEachDevice; + pBankInfo->suportedCasLatencies = pDimmInfo->suportedCasLatencies; + pBankInfo->refreshInterval = pDimmInfo->refreshInterval; + + /* DIMM timing parameters */ + pBankInfo->minCycleTimeAtMaxCasLatPs = pDimmInfo->minCycleTimeAtMaxCasLatPs; + pBankInfo->minCycleTimeAtMaxCasLatMinus1Ps = + pDimmInfo->minCycleTimeAtMaxCasLatMinus1Ps; + pBankInfo->minCycleTimeAtMaxCasLatMinus2Ps = + pDimmInfo->minCycleTimeAtMaxCasLatMinus2Ps; + + pBankInfo->minRowPrechargeTime = pDimmInfo->minRowPrechargeTime; + pBankInfo->minRowActiveToRowActive = pDimmInfo->minRowActiveToRowActive; + pBankInfo->minRasToCasDelay = pDimmInfo->minRasToCasDelay; + pBankInfo->minRasPulseWidth = pDimmInfo->minRasPulseWidth; + pBankInfo->minWriteRecoveryTime = pDimmInfo->minWriteRecoveryTime; + pBankInfo->minWriteToReadCmdDelay = pDimmInfo->minWriteToReadCmdDelay; + pBankInfo->minReadToPrechCmdDelay = pDimmInfo->minReadToPrechCmdDelay; + pBankInfo->minRefreshToActiveCmd = pDimmInfo->minRefreshToActiveCmd; + + /* Parameters calculated from the extracted DIMM information */ + pBankInfo->size = pDimmInfo->size/pDimmInfo->numOfModuleBanks; + pBankInfo->deviceDensity = pDimmInfo->deviceDensity; + pBankInfo->numberOfDevices = pDimmInfo->numberOfDevices / + pDimmInfo->numOfModuleBanks; + + /* DIMM attributes (MV_TRUE for yes) */ + + if ((pDimmInfo->memoryType == MEM_TYPE_SDRAM) || + (pDimmInfo->memoryType == MEM_TYPE_DDR1) ) + { + if (pDimmInfo->dimmAttributes & BIT1) + pBankInfo->registeredAddrAndControlInputs = MV_TRUE; + else + pBankInfo->registeredAddrAndControlInputs = MV_FALSE; + } + else /* pDimmInfo->memoryType == MEM_TYPE_DDR2 */ + { + if (pDimmInfo->dimmTypeInfo & (BIT0 | BIT4)) + pBankInfo->registeredAddrAndControlInputs = MV_TRUE; + else + pBankInfo->registeredAddrAndControlInputs = MV_FALSE; + } + + return; +} +/******************************************************************************* +* dimmSpdCpy - Cpy SPD parameters from dimm 0 to dimm 1. +* +* DESCRIPTION: +* Read the DIMM SPD parameters from dimm 0 into dimm 1 SPD. +* +* INPUT: +* None. +* +* OUTPUT: +* None. +* +* RETURN: +* MV_TRUE if function could read DIMM parameters, MV_FALSE otherwise. +* +*******************************************************************************/ +MV_STATUS dimmSpdCpy(MV_VOID) +{ + MV_U32 i; + MV_U32 spdChecksum; + + MV_TWSI_SLAVE twsiSlave; + MV_U8 data[SPD_SIZE]; + + /* zero dimmInfo structure */ + memset(data, 0, SPD_SIZE); + + /* read the dimm eeprom */ + DB(mvOsPrintf("DRAM: Read Dimm eeprom\n")); + twsiSlave.slaveAddr.address = MV_BOARD_DIMM0_I2C_ADDR; + twsiSlave.slaveAddr.type = ADDR7_BIT; + twsiSlave.validOffset = MV_TRUE; + twsiSlave.offset = 0; + twsiSlave.moreThen256 = MV_FALSE; + + if( MV_OK != mvTwsiRead (MV_BOARD_DIMM_I2C_CHANNEL, &twsiSlave, data, SPD_SIZE) ) + { + DB(mvOsPrintf("DRAM: ERR. no DIMM in dimmNum 0\n")); + return MV_FAIL; + } + DB(puts("DRAM: Reading dimm info succeded.\n")); + + /* calculate SPD checksum */ + spdChecksum = 0; + + for(i = 0 ; i <= 62 ; i++) + { + spdChecksum += data[i]; + } + + if ((spdChecksum & 0xff) != data[63]) + { + DB(mvOsPrintf("DRAM: Warning. Wrong SPD Checksum %2x, expValue=%2x\n", + (MV_U32)(spdChecksum & 0xff), data[63])); + } + else + { + DB(mvOsPrintf("DRAM: SPD Checksum ok!\n")); + } + + /* copy the SPD content 1:1 into the DIMM 1 SPD */ + twsiSlave.slaveAddr.address = MV_BOARD_DIMM1_I2C_ADDR; + twsiSlave.slaveAddr.type = ADDR7_BIT; + twsiSlave.validOffset = MV_TRUE; + twsiSlave.offset = 0; + twsiSlave.moreThen256 = MV_FALSE; + + for(i = 0 ; i < SPD_SIZE ; i++) + { + twsiSlave.offset = i; + if( MV_OK != mvTwsiWrite (MV_BOARD_DIMM_I2C_CHANNEL, &twsiSlave, &data[i], 1) ) + { + mvOsPrintf("DRAM: ERR. no DIMM in dimmNum 1 byte %d \n",i); + return MV_FAIL; + } + mvOsDelay(5); + } + + DB(puts("DRAM: Reading dimm info succeded.\n")); + return MV_OK; +} + +/******************************************************************************* +* dimmSpdGet - Get the SPD parameters. +* +* DESCRIPTION: +* Read the DIMM SPD parameters into given struct parameter. +* +* INPUT: +* dimmNum - DIMM number. See MV_BOARD_DIMM_NUM enumerator. +* +* OUTPUT: +* pDimmInfo - DIMM information structure. +* +* RETURN: +* MV_TRUE if function could read DIMM parameters, MV_FALSE otherwise. +* +*******************************************************************************/ +MV_STATUS dimmSpdGet(MV_U32 dimmNum, MV_DIMM_INFO *pDimmInfo) +{ + MV_U32 i; + MV_U32 density = 1; + MV_U32 spdChecksum; + + MV_TWSI_SLAVE twsiSlave; + MV_U8 data[SPD_SIZE]; + + if((NULL == pDimmInfo)|| (dimmNum >= MAX_DIMM_NUM)) + { + DB(mvOsPrintf("Dram: mvDramBankInfoGet bad params \n")); + return MV_BAD_PARAM; + } + + /* zero dimmInfo structure */ + memset(data, 0, SPD_SIZE); + + /* read the dimm eeprom */ + DB(mvOsPrintf("DRAM: Read Dimm eeprom\n")); + twsiSlave.slaveAddr.address = (dimmNum == 0) ? + MV_BOARD_DIMM0_I2C_ADDR : MV_BOARD_DIMM1_I2C_ADDR; + twsiSlave.slaveAddr.type = ADDR7_BIT; + twsiSlave.validOffset = MV_TRUE; + twsiSlave.offset = 0; + twsiSlave.moreThen256 = MV_FALSE; + + if( MV_OK != mvTwsiRead (MV_BOARD_DIMM_I2C_CHANNEL, &twsiSlave, data, SPD_SIZE) ) + { + DB(mvOsPrintf("DRAM: ERR. no DIMM in dimmNum %d \n", dimmNum)); + return MV_FAIL; + } + DB(puts("DRAM: Reading dimm info succeded.\n")); + + /* calculate SPD checksum */ + spdChecksum = 0; + + for(i = 0 ; i <= 62 ; i++) + { + spdChecksum += data[i]; + } + + if ((spdChecksum & 0xff) != data[63]) + { + DB(mvOsPrintf("DRAM: Warning. Wrong SPD Checksum %2x, expValue=%2x\n", + (MV_U32)(spdChecksum & 0xff), data[63])); + } + else + { + DB(mvOsPrintf("DRAM: SPD Checksum ok!\n")); + } + + /* copy the SPD content 1:1 into the dimmInfo structure*/ + for(i = 0 ; i < SPD_SIZE ; i++) + { + pDimmInfo->spdRawData[i] = data[i]; + DB(mvOsPrintf("SPD-EEPROM Byte %3d = %3x (%3d)\n",i, data[i], data[i])); + } + + DB(mvOsPrintf("DRAM SPD Information:\n")); + + /* Memory type (DDR / SDRAM) */ + switch (data[DIMM_MEM_TYPE]) + { + case (DIMM_MEM_TYPE_SDRAM): + pDimmInfo->memoryType = MEM_TYPE_SDRAM; + DB(mvOsPrintf("DRAM Memeory type SDRAM\n")); + break; + case (DIMM_MEM_TYPE_DDR1): + pDimmInfo->memoryType = MEM_TYPE_DDR1; + DB(mvOsPrintf("DRAM Memeory type DDR1\n")); + break; + case (DIMM_MEM_TYPE_DDR2): + pDimmInfo->memoryType = MEM_TYPE_DDR2; + DB(mvOsPrintf("DRAM Memeory type DDR2\n")); + break; + default: + mvOsPrintf("ERROR: Undefined memory type!\n"); + return MV_ERROR; + } + + + /* Number Of Row Addresses */ + pDimmInfo->numOfRowAddr = data[DIMM_ROW_NUM]; + DB(mvOsPrintf("DRAM numOfRowAddr[3] %d\n",pDimmInfo->numOfRowAddr)); + + /* Number Of Column Addresses */ + pDimmInfo->numOfColAddr = data[DIMM_COL_NUM]; + DB(mvOsPrintf("DRAM numOfColAddr[4] %d\n",pDimmInfo->numOfColAddr)); + + /* Number Of Module Banks */ + pDimmInfo->numOfModuleBanks = data[DIMM_MODULE_BANK_NUM]; + DB(mvOsPrintf("DRAM numOfModuleBanks[5] 0x%x\n", + pDimmInfo->numOfModuleBanks)); + + /* Number of module banks encoded differently for DDR2 */ + if (pDimmInfo->memoryType == MEM_TYPE_DDR2) + pDimmInfo->numOfModuleBanks = (pDimmInfo->numOfModuleBanks & 0x7)+1; + + /* Data Width */ + pDimmInfo->dataWidth = data[DIMM_DATA_WIDTH]; + DB(mvOsPrintf("DRAM dataWidth[6] 0x%x\n", pDimmInfo->dataWidth)); + + /* Minimum Cycle Time At Max CasLatancy */ + pDimmInfo->minCycleTimeAtMaxCasLatPs = cas2ps(data[DIMM_MIN_CC_AT_MAX_CAS]); + + /* Error Check Type */ + pDimmInfo->errorCheckType = data[DIMM_ERR_CHECK_TYPE]; + DB(mvOsPrintf("DRAM errorCheckType[11] 0x%x\n", + pDimmInfo->errorCheckType)); + + /* Refresh Interval */ + pDimmInfo->refreshInterval = data[DIMM_REFRESH_INTERVAL]; + DB(mvOsPrintf("DRAM refreshInterval[12] 0x%x\n", + pDimmInfo->refreshInterval)); + + /* Sdram Width */ + pDimmInfo->sdramWidth = data[DIMM_SDRAM_WIDTH]; + DB(mvOsPrintf("DRAM sdramWidth[13] 0x%x\n",pDimmInfo->sdramWidth)); + + /* Error Check Data Width */ + pDimmInfo->errorCheckDataWidth = data[DIMM_ERR_CHECK_DATA_WIDTH]; + DB(mvOsPrintf("DRAM errorCheckDataWidth[14] 0x%x\n", + pDimmInfo->errorCheckDataWidth)); + + /* Burst Length Supported */ + /* SDRAM/DDR1: + *******-******-******-******-******-******-******-******* + * bit7 | bit6 | bit5 | bit4 | bit3 | bit2 | bit1 | bit0 * + *******-******-******-******-******-******-******-******* + burst length = * Page | TBD | TBD | TBD | 8 | 4 | 2 | 1 * + *********************************************************/ + /* DDR2: + *******-******-******-******-******-******-******-******* + * bit7 | bit6 | bit5 | bit4 | bit3 | bit2 | bit1 | bit0 * + *******-******-******-******-******-******-******-******* + burst length = * Page | TBD | TBD | TBD | 8 | 4 | TBD | TBD * + *********************************************************/ + + pDimmInfo->burstLengthSupported = data[DIMM_BURST_LEN_SUP]; + DB(mvOsPrintf("DRAM burstLengthSupported[16] 0x%x\n", + pDimmInfo->burstLengthSupported)); + + /* Number Of Banks On Each Device */ + pDimmInfo->numOfBanksOnEachDevice = data[DIMM_DEV_BANK_NUM]; + DB(mvOsPrintf("DRAM numOfBanksOnEachDevice[17] 0x%x\n", + pDimmInfo->numOfBanksOnEachDevice)); + + /* Suported Cas Latencies */ + + /* SDRAM: + *******-******-******-******-******-******-******-******* + * bit7 | bit6 | bit5 | bit4 | bit3 | bit2 | bit1 | bit0 * + *******-******-******-******-******-******-******-******* + CAS = * TBD | 7 | 6 | 5 | 4 | 3 | 2 | 1 * + ********************************************************/ + + /* DDR 1: + *******-******-******-******-******-******-******-******* + * bit7 | bit6 | bit5 | bit4 | bit3 | bit2 | bit1 | bit0 * + *******-******-******-******-******-******-******-******* + CAS = * TBD | 4 | 3.5 | 3 | 2.5 | 2 | 1.5 | 1 * + *********************************************************/ + + /* DDR 2: + *******-******-******-******-******-******-******-******* + * bit7 | bit6 | bit5 | bit4 | bit3 | bit2 | bit1 | bit0 * + *******-******-******-******-******-******-******-******* + CAS = * TBD | TBD | 5 | 4 | 3 | 2 | TBD | TBD * + *********************************************************/ + + pDimmInfo->suportedCasLatencies = data[DIMM_SUP_CAL]; + DB(mvOsPrintf("DRAM suportedCasLatencies[18] 0x%x\n", + pDimmInfo->suportedCasLatencies)); + + /* For DDR2 only, get the DIMM type information */ + if (pDimmInfo->memoryType == MEM_TYPE_DDR2) + { + pDimmInfo->dimmTypeInfo = data[DIMM_DDR2_TYPE_INFORMATION]; + DB(mvOsPrintf("DRAM dimmTypeInfo[20] (DDR2) 0x%x\n", + pDimmInfo->dimmTypeInfo)); + } + + /* SDRAM Modules Attributes */ + pDimmInfo->dimmAttributes = data[DIMM_BUF_ADDR_CONT_IN]; + DB(mvOsPrintf("DRAM dimmAttributes[21] 0x%x\n", + pDimmInfo->dimmAttributes)); + + /* Minimum Cycle Time At Max CasLatancy Minus 1*/ + pDimmInfo->minCycleTimeAtMaxCasLatMinus1Ps = + cas2ps(data[DIMM_MIN_CC_AT_MAX_CAS_MINUS1]); + + /* Minimum Cycle Time At Max CasLatancy Minus 2*/ + pDimmInfo->minCycleTimeAtMaxCasLatMinus2Ps = + cas2ps(data[DIMM_MIN_CC_AT_MAX_CAS_MINUS2]); + + pDimmInfo->minRowPrechargeTime = data[DIMM_MIN_ROW_PRECHARGE_TIME]; + DB(mvOsPrintf("DRAM minRowPrechargeTime[27] 0x%x\n", + pDimmInfo->minRowPrechargeTime)); + pDimmInfo->minRowActiveToRowActive = data[DIMM_MIN_ROW_ACTIVE_TO_ROW_ACTIVE]; + DB(mvOsPrintf("DRAM minRowActiveToRowActive[28] 0x%x\n", + pDimmInfo->minRowActiveToRowActive)); + pDimmInfo->minRasToCasDelay = data[DIMM_MIN_RAS_TO_CAS_DELAY]; + DB(mvOsPrintf("DRAM minRasToCasDelay[29] 0x%x\n", + pDimmInfo->minRasToCasDelay)); + pDimmInfo->minRasPulseWidth = data[DIMM_MIN_RAS_PULSE_WIDTH]; + DB(mvOsPrintf("DRAM minRasPulseWidth[30] 0x%x\n", + pDimmInfo->minRasPulseWidth)); + + /* DIMM Bank Density */ + pDimmInfo->dimmBankDensity = data[DIMM_BANK_DENSITY]; + DB(mvOsPrintf("DRAM dimmBankDensity[31] 0x%x\n", + pDimmInfo->dimmBankDensity)); + + /* Only DDR2 includes Write Recovery Time field. Other SDRAM ignore */ + pDimmInfo->minWriteRecoveryTime = data[DIMM_MIN_WRITE_RECOVERY_TIME]; + DB(mvOsPrintf("DRAM minWriteRecoveryTime[36] 0x%x\n", + pDimmInfo->minWriteRecoveryTime)); + + /* Only DDR2 includes Internal Write To Read Command Delay field. */ + pDimmInfo->minWriteToReadCmdDelay = data[DIMM_MIN_WRITE_TO_READ_CMD_DELAY]; + DB(mvOsPrintf("DRAM minWriteToReadCmdDelay[37] 0x%x\n", + pDimmInfo->minWriteToReadCmdDelay)); + + /* Only DDR2 includes Internal Read To Precharge Command Delay field. */ + pDimmInfo->minReadToPrechCmdDelay = data[DIMM_MIN_READ_TO_PRECH_CMD_DELAY]; + DB(mvOsPrintf("DRAM minReadToPrechCmdDelay[38] 0x%x\n", + pDimmInfo->minReadToPrechCmdDelay)); + + /* Only DDR2 includes Minimum Refresh to Activate/Refresh Command field */ + pDimmInfo->minRefreshToActiveCmd = data[DIMM_MIN_REFRESH_TO_ACTIVATE_CMD]; + DB(mvOsPrintf("DRAM minRefreshToActiveCmd[42] 0x%x\n", + pDimmInfo->minRefreshToActiveCmd)); + + /* calculating the sdram density. Representing device density from */ + /* bit 20 to allow representation of 4GB and above. */ + /* For example, if density is 512Mbit 0x20000000, will be represent in */ + /* deviceDensity by 0x20000000 >> 16 --> 0x00000200. Another example */ + /* is density 8GB 0x200000000 >> 16 --> 0x00002000. */ + density = (1 << ((pDimmInfo->numOfRowAddr + pDimmInfo->numOfColAddr) - 20)); + pDimmInfo->deviceDensity = density * + pDimmInfo->numOfBanksOnEachDevice * + pDimmInfo->sdramWidth; + DB(mvOsPrintf("DRAM deviceDensity %d\n",pDimmInfo->deviceDensity)); + + /* Number of devices includeing Error correction */ + pDimmInfo->numberOfDevices = (pDimmInfo->dataWidth/pDimmInfo->sdramWidth) * + pDimmInfo->numOfModuleBanks; + DB(mvOsPrintf("DRAM numberOfDevices %d\n", + pDimmInfo->numberOfDevices)); + + pDimmInfo->size = 0; + + /* Note that pDimmInfo->size is in MB units */ + if (pDimmInfo->memoryType == MEM_TYPE_SDRAM) + { + if (pDimmInfo->dimmBankDensity & BIT0) + pDimmInfo->size += 1024; /* Equal to 1GB */ + else if (pDimmInfo->dimmBankDensity & BIT1) + pDimmInfo->size += 8; /* Equal to 8MB */ + else if (pDimmInfo->dimmBankDensity & BIT2) + pDimmInfo->size += 16; /* Equal to 16MB */ + else if (pDimmInfo->dimmBankDensity & BIT3) + pDimmInfo->size += 32; /* Equal to 32MB */ + else if (pDimmInfo->dimmBankDensity & BIT4) + pDimmInfo->size += 64; /* Equal to 64MB */ + else if (pDimmInfo->dimmBankDensity & BIT5) + pDimmInfo->size += 128; /* Equal to 128MB */ + else if (pDimmInfo->dimmBankDensity & BIT6) + pDimmInfo->size += 256; /* Equal to 256MB */ + else if (pDimmInfo->dimmBankDensity & BIT7) + pDimmInfo->size += 512; /* Equal to 512MB */ + } + else if (pDimmInfo->memoryType == MEM_TYPE_DDR1) + { + if (pDimmInfo->dimmBankDensity & BIT0) + pDimmInfo->size += 1024; /* Equal to 1GB */ + else if (pDimmInfo->dimmBankDensity & BIT1) + pDimmInfo->size += 2048; /* Equal to 2GB */ + else if (pDimmInfo->dimmBankDensity & BIT2) + pDimmInfo->size += 16; /* Equal to 16MB */ + else if (pDimmInfo->dimmBankDensity & BIT3) + pDimmInfo->size += 32; /* Equal to 32MB */ + else if (pDimmInfo->dimmBankDensity & BIT4) + pDimmInfo->size += 64; /* Equal to 64MB */ + else if (pDimmInfo->dimmBankDensity & BIT5) + pDimmInfo->size += 128; /* Equal to 128MB */ + else if (pDimmInfo->dimmBankDensity & BIT6) + pDimmInfo->size += 256; /* Equal to 256MB */ + else if (pDimmInfo->dimmBankDensity & BIT7) + pDimmInfo->size += 512; /* Equal to 512MB */ + } + else /* if (dimmInfo.memoryType == MEM_TYPE_DDR2) */ + { + if (pDimmInfo->dimmBankDensity & BIT0) + pDimmInfo->size += 1024; /* Equal to 1GB */ + else if (pDimmInfo->dimmBankDensity & BIT1) + pDimmInfo->size += 2048; /* Equal to 2GB */ + else if (pDimmInfo->dimmBankDensity & BIT2) + pDimmInfo->size += 4096; /* Equal to 4GB */ + else if (pDimmInfo->dimmBankDensity & BIT3) + pDimmInfo->size += 8192; /* Equal to 8GB */ + else if (pDimmInfo->dimmBankDensity & BIT4) + pDimmInfo->size += 16384; /* Equal to 16GB */ + else if (pDimmInfo->dimmBankDensity & BIT5) + pDimmInfo->size += 128; /* Equal to 128MB */ + else if (pDimmInfo->dimmBankDensity & BIT6) + pDimmInfo->size += 256; /* Equal to 256MB */ + else if (pDimmInfo->dimmBankDensity & BIT7) + pDimmInfo->size += 512; /* Equal to 512MB */ + } + + pDimmInfo->size *= pDimmInfo->numOfModuleBanks; + + DB(mvOsPrintf("Dram: dimm size %dMB \n",pDimmInfo->size)); + + return MV_OK; +} + +/******************************************************************************* +* dimmSpdPrint - Print the SPD parameters. +* +* DESCRIPTION: +* Print the Dimm SPD parameters. +* +* INPUT: +* pDimmInfo - DIMM information structure. +* +* OUTPUT: +* None. +* +* RETURN: +* None. +* +*******************************************************************************/ +MV_VOID dimmSpdPrint(MV_U32 dimmNum) +{ + MV_DIMM_INFO dimmInfo; + MV_U32 i, temp = 0; + MV_U32 k, maskLeftOfPoint = 0, maskRightOfPoint = 0; + MV_U32 rightOfPoint = 0,leftOfPoint = 0, div, time_tmp, shift; + MV_U32 busClkPs; + MV_U8 trp_clocks=0, trcd_clocks, tras_clocks, trrd_clocks, + temp_buf[40], *spdRawData; + + busClkPs = 1000000000 / (mvBoardSysClkGet() / 100); /* in 10 ps units */ + + spdRawData = dimmInfo.spdRawData; + + if(MV_OK != dimmSpdGet(dimmNum, &dimmInfo)) + { + mvOsOutput("ERROR: Could not read SPD information!\n"); + return; + } + + /* find Manufactura of Dimm Module */ + mvOsOutput("\nManufacturer's JEDEC ID Code: "); + for(i = 0 ; i < DIMM_MODULE_MANU_SIZE ; i++) + { + mvOsOutput("%x",spdRawData[DIMM_MODULE_MANU_OFFS + i]); + } + mvOsOutput("\n"); + + /* Manufacturer's Specific Data */ + for(i = 0 ; i < DIMM_MODULE_ID_SIZE ; i++) + { + temp_buf[i] = spdRawData[DIMM_MODULE_ID_OFFS + i]; + } + mvOsOutput("Manufacturer's Specific Data: %s\n", temp_buf); + + /* Module Part Number */ + for(i = 0 ; i < DIMM_MODULE_VEN_SIZE ; i++) + { + temp_buf[i] = spdRawData[DIMM_MODULE_VEN_OFFS + i]; + } + mvOsOutput("Module Part Number: %s\n", temp_buf); + + /* Module Serial Number */ + for(i = 0; i < sizeof(MV_U32); i++) + { + temp |= spdRawData[95+i] << 8*i; + } + mvOsOutput("DIMM Serial No. %ld (%lx)\n", (long)temp, + (long)temp); + + /* find Manufac-Data of Dimm Module */ + mvOsOutput("Manufactoring Date: Year 20%d%d/ ww %d%d\n", + ((spdRawData[93] & 0xf0) >> 4), (spdRawData[93] & 0xf), + ((spdRawData[94] & 0xf0) >> 4), (spdRawData[94] & 0xf)); + /* find modul_revision of Dimm Module */ + mvOsOutput("Module Revision: %d.%d\n", + spdRawData[62]/10, spdRawData[62]%10); + + /* find manufac_place of Dimm Module */ + mvOsOutput("manufac_place: %d\n", spdRawData[72]); + + /* go over the first 35 I2C data bytes */ + for(i = 2 ; i <= 35 ; i++) + switch(i) + { + case 2: /* Memory type (DDR1/2 / SDRAM) */ + if (dimmInfo.memoryType == MEM_TYPE_SDRAM) + mvOsOutput("Dram Type is: SDRAM\n"); + else if (dimmInfo.memoryType == MEM_TYPE_DDR1) + mvOsOutput("Dram Type is: SDRAM DDR1\n"); + else if (dimmInfo.memoryType == MEM_TYPE_DDR2) + mvOsOutput("Dram Type is: SDRAM DDR2\n"); + else + mvOsOutput("Dram Type unknown\n"); + break; +/*----------------------------------------------------------------------------*/ + + case 3: /* Number Of Row Addresses */ + mvOsOutput("Module Number of row addresses: %d\n", + dimmInfo.numOfRowAddr); + break; +/*----------------------------------------------------------------------------*/ + + case 4: /* Number Of Column Addresses */ + mvOsOutput("Module Number of col addresses: %d\n", + dimmInfo.numOfColAddr); + break; +/*----------------------------------------------------------------------------*/ + + case 5: /* Number Of Module Banks */ + mvOsOutput("Number of Banks on Mod.: %d\n", + dimmInfo.numOfModuleBanks); + break; +/*----------------------------------------------------------------------------*/ + + case 6: /* Data Width */ + mvOsOutput("Module Data Width: %d bit\n", + dimmInfo.dataWidth); + break; +/*----------------------------------------------------------------------------*/ + + case 8: /* Voltage Interface */ + switch(spdRawData[i]) + { + case 0x0: + mvOsOutput("Module is TTL_5V_TOLERANT\n"); + break; + case 0x1: + mvOsOutput("Module is LVTTL\n"); + break; + case 0x2: + mvOsOutput("Module is HSTL_1_5V\n"); + break; + case 0x3: + mvOsOutput("Module is SSTL_3_3V\n"); + break; + case 0x4: + mvOsOutput("Module is SSTL_2_5V\n"); + break; + case 0x5: + if (dimmInfo.memoryType != MEM_TYPE_SDRAM) + { + mvOsOutput("Module is SSTL_1_8V\n"); + break; + } + default: + mvOsOutput("Module is VOLTAGE_UNKNOWN\n"); + break; + } + break; +/*----------------------------------------------------------------------------*/ + + case 9: /* Minimum Cycle Time At Max CasLatancy */ + leftOfPoint = (spdRawData[i] & 0xf0) >> 4; + rightOfPoint = (spdRawData[i] & 0x0f) * 10; + + /* DDR2 addition of right of point */ + if ((spdRawData[i] & 0x0f) == 0xA) + { + rightOfPoint = 25; + } + if ((spdRawData[i] & 0x0f) == 0xB) + { + rightOfPoint = 33; + } + if ((spdRawData[i] & 0x0f) == 0xC) + { + rightOfPoint = 66; + } + if ((spdRawData[i] & 0x0f) == 0xD) + { + rightOfPoint = 75; + } + mvOsOutput("Minimum Cycle Time At Max CL: %d.%d [ns]\n", + leftOfPoint, rightOfPoint); + break; +/*----------------------------------------------------------------------------*/ + + case 10: /* Clock To Data Out */ + div = (dimmInfo.memoryType == MEM_TYPE_SDRAM)? 10:100; + time_tmp = (((spdRawData[i] & 0xf0) >> 4)*10) + + ((spdRawData[i] & 0x0f)); + leftOfPoint = time_tmp / div; + rightOfPoint = time_tmp % div; + mvOsOutput("Clock To Data Out: %d.%d [ns]\n", + leftOfPoint, rightOfPoint); + break; +/*----------------------------------------------------------------------------*/ + + case 11: /* Error Check Type */ + mvOsOutput("Error Check Type (0=NONE): %d\n", + dimmInfo.errorCheckType); + break; +/*----------------------------------------------------------------------------*/ + + case 12: /* Refresh Interval */ + mvOsOutput("Refresh Rate: %x\n", + dimmInfo.refreshInterval); + break; +/*----------------------------------------------------------------------------*/ + + case 13: /* Sdram Width */ + mvOsOutput("Sdram Width: %d bits\n", + dimmInfo.sdramWidth); + break; +/*----------------------------------------------------------------------------*/ + + case 14: /* Error Check Data Width */ + mvOsOutput("Error Check Data Width: %d bits\n", + dimmInfo.errorCheckDataWidth); + break; +/*----------------------------------------------------------------------------*/ + + case 15: /* Minimum Clock Delay is unsupported */ + if ((dimmInfo.memoryType == MEM_TYPE_SDRAM) || + (dimmInfo.memoryType == MEM_TYPE_DDR1)) + { + mvOsOutput("Minimum Clk Delay back to back: %d\n", + spdRawData[i]); + } + break; +/*----------------------------------------------------------------------------*/ + + case 16: /* Burst Length Supported */ + /* SDRAM/DDR1: + *******-******-******-******-******-******-******-******* + * bit7 | bit6 | bit5 | bit4 | bit3 | bit2 | bit1 | bit0 * + *******-******-******-******-******-******-******-******* + burst length = * Page | TBD | TBD | TBD | 8 | 4 | 2 | 1 * + *********************************************************/ + /* DDR2: + *******-******-******-******-******-******-******-******* + * bit7 | bit6 | bit5 | bit4 | bit3 | bit2 | bit1 | bit0 * + *******-******-******-******-******-******-******-******* + burst length = * Page | TBD | TBD | TBD | 8 | 4 | TBD | TBD * + *********************************************************/ + mvOsOutput("Burst Length Supported: "); + if ((dimmInfo.memoryType == MEM_TYPE_SDRAM) || + (dimmInfo.memoryType == MEM_TYPE_DDR1)) + { + if (dimmInfo.burstLengthSupported & BIT0) + mvOsOutput("1, "); + if (dimmInfo.burstLengthSupported & BIT1) + mvOsOutput("2, "); + } + if (dimmInfo.burstLengthSupported & BIT2) + mvOsOutput("4, "); + if (dimmInfo.burstLengthSupported & BIT3) + mvOsOutput("8, "); + + mvOsOutput(" Bit \n"); + break; +/*----------------------------------------------------------------------------*/ + + case 17: /* Number Of Banks On Each Device */ + mvOsOutput("Number Of Banks On Each Chip: %d\n", + dimmInfo.numOfBanksOnEachDevice); + break; +/*----------------------------------------------------------------------------*/ + + case 18: /* Suported Cas Latencies */ + + /* SDRAM: + *******-******-******-******-******-******-******-******* + * bit7 | bit6 | bit5 | bit4 | bit3 | bit2 | bit1 | bit0 * + *******-******-******-******-******-******-******-******* + CAS = * TBD | 7 | 6 | 5 | 4 | 3 | 2 | 1 * + ********************************************************/ + + /* DDR 1: + *******-******-******-******-******-******-******-******* + * bit7 | bit6 | bit5 | bit4 | bit3 | bit2 | bit1 | bit0 * + *******-******-******-******-******-******-******-******* + CAS = * TBD | 4 | 3.5 | 3 | 2.5 | 2 | 1.5 | 1 * + *********************************************************/ + + /* DDR 2: + *******-******-******-******-******-******-******-******* + * bit7 | bit6 | bit5 | bit4 | bit3 | bit2 | bit1 | bit0 * + *******-******-******-******-******-******-******-******* + CAS = * TBD | TBD | 5 | 4 | 3 | 2 | TBD | TBD * + *********************************************************/ + + mvOsOutput("Suported Cas Latencies: (CL) "); + if (dimmInfo.memoryType == MEM_TYPE_SDRAM) + { + for (k = 0; k <=7; k++) + { + if (dimmInfo.suportedCasLatencies & (1 << k)) + mvOsOutput("%d, ", k+1); + } + } + else if (dimmInfo.memoryType == MEM_TYPE_DDR1) + { + if (dimmInfo.suportedCasLatencies & BIT0) + mvOsOutput("1, "); + if (dimmInfo.suportedCasLatencies & BIT1) + mvOsOutput("1.5, "); + if (dimmInfo.suportedCasLatencies & BIT2) + mvOsOutput("2, "); + if (dimmInfo.suportedCasLatencies & BIT3) + mvOsOutput("2.5, "); + if (dimmInfo.suportedCasLatencies & BIT4) + mvOsOutput("3, "); + if (dimmInfo.suportedCasLatencies & BIT5) + mvOsOutput("3.5, "); + } + else if (dimmInfo.memoryType == MEM_TYPE_DDR2) + { + if (dimmInfo.suportedCasLatencies & BIT2) + mvOsOutput("2, "); + if (dimmInfo.suportedCasLatencies & BIT3) + mvOsOutput("3, "); + if (dimmInfo.suportedCasLatencies & BIT4) + mvOsOutput("4, "); + if (dimmInfo.suportedCasLatencies & BIT5) + mvOsOutput("5, "); + } + else + mvOsOutput("?.?, "); + mvOsOutput("\n"); + break; +/*----------------------------------------------------------------------------*/ + + case 20: /* DDR2 DIMM type info */ + if (dimmInfo.memoryType == MEM_TYPE_DDR2) + { + if (dimmInfo.dimmTypeInfo & (BIT0 | BIT4)) + mvOsOutput("Registered DIMM (RDIMM)\n"); + else if (dimmInfo.dimmTypeInfo & (BIT1 | BIT5)) + mvOsOutput("Unbuffered DIMM (UDIMM)\n"); + else + mvOsOutput("Unknown DIMM type.\n"); + } + + break; +/*----------------------------------------------------------------------------*/ + + case 21: /* SDRAM Modules Attributes */ + mvOsOutput("\nModule Attributes (SPD Byte 21): \n"); + + if (dimmInfo.memoryType == MEM_TYPE_SDRAM) + { + if (dimmInfo.dimmAttributes & BIT0) + mvOsOutput(" Buffered Addr/Control Input: Yes\n"); + else + mvOsOutput(" Buffered Addr/Control Input: No\n"); + + if (dimmInfo.dimmAttributes & BIT1) + mvOsOutput(" Registered Addr/Control Input: Yes\n"); + else + mvOsOutput(" Registered Addr/Control Input: No\n"); + + if (dimmInfo.dimmAttributes & BIT2) + mvOsOutput(" On-Card PLL (clock): Yes \n"); + else + mvOsOutput(" On-Card PLL (clock): No \n"); + + if (dimmInfo.dimmAttributes & BIT3) + mvOsOutput(" Bufferd DQMB Input: Yes \n"); + else + mvOsOutput(" Bufferd DQMB Inputs: No \n"); + + if (dimmInfo.dimmAttributes & BIT4) + mvOsOutput(" Registered DQMB Inputs: Yes \n"); + else + mvOsOutput(" Registered DQMB Inputs: No \n"); + + if (dimmInfo.dimmAttributes & BIT5) + mvOsOutput(" Differential Clock Input: Yes \n"); + else + mvOsOutput(" Differential Clock Input: No \n"); + + if (dimmInfo.dimmAttributes & BIT6) + mvOsOutput(" redundant Row Addressing: Yes \n"); + else + mvOsOutput(" redundant Row Addressing: No \n"); + } + else if (dimmInfo.memoryType == MEM_TYPE_DDR1) + { + if (dimmInfo.dimmAttributes & BIT0) + mvOsOutput(" Buffered Addr/Control Input: Yes\n"); + else + mvOsOutput(" Buffered Addr/Control Input: No\n"); + + if (dimmInfo.dimmAttributes & BIT1) + mvOsOutput(" Registered Addr/Control Input: Yes\n"); + else + mvOsOutput(" Registered Addr/Control Input: No\n"); + + if (dimmInfo.dimmAttributes & BIT2) + mvOsOutput(" On-Card PLL (clock): Yes \n"); + else + mvOsOutput(" On-Card PLL (clock): No \n"); + + if (dimmInfo.dimmAttributes & BIT3) + mvOsOutput(" FET Switch On-Card Enabled: Yes \n"); + else + mvOsOutput(" FET Switch On-Card Enabled: No \n"); + + if (dimmInfo.dimmAttributes & BIT4) + mvOsOutput(" FET Switch External Enabled: Yes \n"); + else + mvOsOutput(" FET Switch External Enabled: No \n"); + + if (dimmInfo.dimmAttributes & BIT5) + mvOsOutput(" Differential Clock Input: Yes \n"); + else + mvOsOutput(" Differential Clock Input: No \n"); + } + else /* if (dimmInfo.memoryType == MEM_TYPE_DDR2) */ + { + mvOsOutput(" Number of Active Registers on the DIMM: %d\n", + (dimmInfo.dimmAttributes & 0x3) + 1); + + mvOsOutput(" Number of PLLs on the DIMM: %d\n", + ((dimmInfo.dimmAttributes) >> 2) & 0x3); + + if (dimmInfo.dimmAttributes & BIT4) + mvOsOutput(" FET Switch External Enabled: Yes \n"); + else + mvOsOutput(" FET Switch External Enabled: No \n"); + + if (dimmInfo.dimmAttributes & BIT6) + mvOsOutput(" Analysis probe installed: Yes \n"); + else + mvOsOutput(" Analysis probe installed: No \n"); + } + + break; +/*----------------------------------------------------------------------------*/ + + case 22: /* Suported AutoPreCharge */ + mvOsOutput("\nModul Attributes (SPD Byte 22): \n"); + if (dimmInfo.memoryType == MEM_TYPE_SDRAM) + { + if ( spdRawData[i] & BIT0 ) + mvOsOutput(" Early Ras Precharge: Yes \n"); + else + mvOsOutput(" Early Ras Precharge: No \n"); + + if ( spdRawData[i] & BIT1 ) + mvOsOutput(" AutoPreCharge: Yes \n"); + else + mvOsOutput(" AutoPreCharge: No \n"); + + if ( spdRawData[i] & BIT2 ) + mvOsOutput(" Precharge All: Yes \n"); + else + mvOsOutput(" Precharge All: No \n"); + + if ( spdRawData[i] & BIT3 ) + mvOsOutput(" Write 1/ReadBurst: Yes \n"); + else + mvOsOutput(" Write 1/ReadBurst: No \n"); + + if ( spdRawData[i] & BIT4 ) + mvOsOutput(" lower VCC tolerance: 5%%\n"); + else + mvOsOutput(" lower VCC tolerance: 10%%\n"); + + if ( spdRawData[i] & BIT5 ) + mvOsOutput(" upper VCC tolerance: 5%%\n"); + else + mvOsOutput(" upper VCC tolerance: 10%%\n"); + } + else if (dimmInfo.memoryType == MEM_TYPE_DDR1) + { + if ( spdRawData[i] & BIT0 ) + mvOsOutput(" Supports Weak Driver: Yes \n"); + else + mvOsOutput(" Supports Weak Driver: No \n"); + + if ( !(spdRawData[i] & BIT4) ) + mvOsOutput(" lower VCC tolerance: 0.2V\n"); + + if ( !(spdRawData[i] & BIT5) ) + mvOsOutput(" upper VCC tolerance: 0.2V\n"); + + if ( spdRawData[i] & BIT6 ) + mvOsOutput(" Concurrent Auto Preharge: Yes \n"); + else + mvOsOutput(" Concurrent Auto Preharge: No \n"); + + if ( spdRawData[i] & BIT7 ) + mvOsOutput(" Supports Fast AP: Yes \n"); + else + mvOsOutput(" Supports Fast AP: No \n"); + } + else if (dimmInfo.memoryType == MEM_TYPE_DDR2) + { + if ( spdRawData[i] & BIT0 ) + mvOsOutput(" Supports Weak Driver: Yes \n"); + else + mvOsOutput(" Supports Weak Driver: No \n"); + } + break; +/*----------------------------------------------------------------------------*/ + + case 23: + /* Minimum Cycle Time At Maximum Cas Latancy Minus 1 (2nd highest CL) */ + leftOfPoint = (spdRawData[i] & 0xf0) >> 4; + rightOfPoint = (spdRawData[i] & 0x0f) * 10; + + /* DDR2 addition of right of point */ + if ((spdRawData[i] & 0x0f) == 0xA) + { + rightOfPoint = 25; + } + if ((spdRawData[i] & 0x0f) == 0xB) + { + rightOfPoint = 33; + } + if ((spdRawData[i] & 0x0f) == 0xC) + { + rightOfPoint = 66; + } + if ((spdRawData[i] & 0x0f) == 0xD) + { + rightOfPoint = 75; + } + + mvOsOutput("Minimum Cycle Time At 2nd highest CasLatancy" + "(0 = Not supported): %d.%d [ns]\n", + leftOfPoint, rightOfPoint ); + break; +/*----------------------------------------------------------------------------*/ + + case 24: /* Clock To Data Out 2nd highest Cas Latency Value*/ + div = (dimmInfo.memoryType == MEM_TYPE_SDRAM) ? 10:100; + time_tmp = (((spdRawData[i] & 0xf0) >> 4)*10) + + ((spdRawData[i] & 0x0f)); + leftOfPoint = time_tmp / div; + rightOfPoint = time_tmp % div; + mvOsOutput("Clock To Data Out (2nd CL value): %d.%d [ns]\n", + leftOfPoint, rightOfPoint); + break; +/*----------------------------------------------------------------------------*/ + + case 25: + /* Minimum Cycle Time At Maximum Cas Latancy Minus 2 (3rd highest CL) */ + if (dimmInfo.memoryType == MEM_TYPE_SDRAM) + { + leftOfPoint = (spdRawData[i] & 0xfc) >> 2; + rightOfPoint = (spdRawData[i] & 0x3) * 25; + } + else /* DDR1 or DDR2 */ + { + leftOfPoint = (spdRawData[i] & 0xf0) >> 4; + rightOfPoint = (spdRawData[i] & 0x0f) * 10; + + /* DDR2 addition of right of point */ + if ((spdRawData[i] & 0x0f) == 0xA) + { + rightOfPoint = 25; + } + if ((spdRawData[i] & 0x0f) == 0xB) + { + rightOfPoint = 33; + } + if ((spdRawData[i] & 0x0f) == 0xC) + { + rightOfPoint = 66; + } + if ((spdRawData[i] & 0x0f) == 0xD) + { + rightOfPoint = 75; + } + } + mvOsOutput("Minimum Cycle Time At 3rd highest CasLatancy" + "(0 = Not supported): %d.%d [ns]\n", + leftOfPoint, rightOfPoint ); + break; +/*----------------------------------------------------------------------------*/ + + case 26: /* Clock To Data Out 3rd highest Cas Latency Value*/ + if (dimmInfo.memoryType == MEM_TYPE_SDRAM) + { + leftOfPoint = (spdRawData[i] & 0xfc) >> 2; + rightOfPoint = (spdRawData[i] & 0x3) * 25; + } + else /* DDR1 or DDR2 */ + { + time_tmp = (((spdRawData[i] & 0xf0) >> 4)*10) + + ((spdRawData[i] & 0x0f)); + leftOfPoint = 0; + rightOfPoint = time_tmp; + } + mvOsOutput("Clock To Data Out (3rd CL value): %d.%2d[ns]\n", + leftOfPoint, rightOfPoint ); + break; +/*----------------------------------------------------------------------------*/ + + case 27: /* Minimum Row Precharge Time */ + shift = (dimmInfo.memoryType == MEM_TYPE_SDRAM)? 0:2; + maskLeftOfPoint = (dimmInfo.memoryType == MEM_TYPE_SDRAM) ? + 0xff : 0xfc; + maskRightOfPoint = (dimmInfo.memoryType == MEM_TYPE_SDRAM) ? + 0x00 : 0x03; + leftOfPoint = ((spdRawData[i] & maskLeftOfPoint) >> shift); + rightOfPoint = (spdRawData[i] & maskRightOfPoint)*25; + temp = ((leftOfPoint*100) + rightOfPoint);/* in 10ps Intervals*/ + trp_clocks = (temp + (busClkPs-1)) / busClkPs; + mvOsOutput("Minimum Row Precharge Time [ns]: %d.%d = " + "in Clk cycles %d\n", + leftOfPoint, rightOfPoint, trp_clocks); + break; +/*----------------------------------------------------------------------------*/ + + case 28: /* Minimum Row Active to Row Active Time */ + shift = (dimmInfo.memoryType == MEM_TYPE_SDRAM)? 0:2; + maskLeftOfPoint = (dimmInfo.memoryType == MEM_TYPE_SDRAM) ? + 0xff : 0xfc; + maskRightOfPoint = (dimmInfo.memoryType == MEM_TYPE_SDRAM) ? + 0x00 : 0x03; + leftOfPoint = ((spdRawData[i] & maskLeftOfPoint) >> shift); + rightOfPoint = (spdRawData[i] & maskRightOfPoint)*25; + temp = ((leftOfPoint*100) + rightOfPoint);/* in 100ns Interval*/ + trrd_clocks = (temp + (busClkPs-1)) / busClkPs; + mvOsOutput("Minimum Row Active -To- Row Active Delay [ns]: " + "%d.%d = in Clk cycles %d\n", + leftOfPoint, rightOfPoint, trp_clocks); + break; +/*----------------------------------------------------------------------------*/ + + case 29: /* Minimum Ras-To-Cas Delay */ + shift = (dimmInfo.memoryType == MEM_TYPE_SDRAM)? 0:2; + maskLeftOfPoint = (dimmInfo.memoryType == MEM_TYPE_SDRAM) ? + 0xff : 0xfc; + maskRightOfPoint = (dimmInfo.memoryType == MEM_TYPE_SDRAM) ? + 0x00 : 0x03; + leftOfPoint = ((spdRawData[i] & maskLeftOfPoint) >> shift); + rightOfPoint = (spdRawData[i] & maskRightOfPoint)*25; + temp = ((leftOfPoint*100) + rightOfPoint);/* in 100ns Interval*/ + trcd_clocks = (temp + (busClkPs-1) )/ busClkPs; + mvOsOutput("Minimum Ras-To-Cas Delay [ns]: %d.%d = " + "in Clk cycles %d\n", + leftOfPoint, rightOfPoint, trp_clocks); + break; +/*----------------------------------------------------------------------------*/ + + case 30: /* Minimum Ras Pulse Width */ + tras_clocks = (cas2ps(spdRawData[i])+(busClkPs-1)) / busClkPs; + mvOsOutput("Minimum Ras Pulse Width [ns]: %d = " + "in Clk cycles %d\n", spdRawData[i], tras_clocks); + break; +/*----------------------------------------------------------------------------*/ + + case 31: /* Module Bank Density */ + mvOsOutput("Module Bank Density (more than 1= Multisize-Module):"); + + if (dimmInfo.memoryType == MEM_TYPE_SDRAM) + { + if (dimmInfo.dimmBankDensity & BIT0) + mvOsOutput("1GB, "); + if (dimmInfo.dimmBankDensity & BIT1) + mvOsOutput("8MB, "); + if (dimmInfo.dimmBankDensity & BIT2) + mvOsOutput("16MB, "); + if (dimmInfo.dimmBankDensity & BIT3) + mvOsOutput("32MB, "); + if (dimmInfo.dimmBankDensity & BIT4) + mvOsOutput("64MB, "); + if (dimmInfo.dimmBankDensity & BIT5) + mvOsOutput("128MB, "); + if (dimmInfo.dimmBankDensity & BIT6) + mvOsOutput("256MB, "); + if (dimmInfo.dimmBankDensity & BIT7) + mvOsOutput("512MB, "); + } + else if (dimmInfo.memoryType == MEM_TYPE_DDR1) + { + if (dimmInfo.dimmBankDensity & BIT0) + mvOsOutput("1GB, "); + if (dimmInfo.dimmBankDensity & BIT1) + mvOsOutput("2GB, "); + if (dimmInfo.dimmBankDensity & BIT2) + mvOsOutput("16MB, "); + if (dimmInfo.dimmBankDensity & BIT3) + mvOsOutput("32MB, "); + if (dimmInfo.dimmBankDensity & BIT4) + mvOsOutput("64MB, "); + if (dimmInfo.dimmBankDensity & BIT5) + mvOsOutput("128MB, "); + if (dimmInfo.dimmBankDensity & BIT6) + mvOsOutput("256MB, "); + if (dimmInfo.dimmBankDensity & BIT7) + mvOsOutput("512MB, "); + } + else /* if (dimmInfo.memoryType == MEM_TYPE_DDR2) */ + { + if (dimmInfo.dimmBankDensity & BIT0) + mvOsOutput("1GB, "); + if (dimmInfo.dimmBankDensity & BIT1) + mvOsOutput("2GB, "); + if (dimmInfo.dimmBankDensity & BIT2) + mvOsOutput("4GB, "); + if (dimmInfo.dimmBankDensity & BIT3) + mvOsOutput("8GB, "); + if (dimmInfo.dimmBankDensity & BIT4) + mvOsOutput("16GB, "); + if (dimmInfo.dimmBankDensity & BIT5) + mvOsOutput("128MB, "); + if (dimmInfo.dimmBankDensity & BIT6) + mvOsOutput("256MB, "); + if (dimmInfo.dimmBankDensity & BIT7) + mvOsOutput("512MB, "); + } + mvOsOutput("\n"); + break; +/*----------------------------------------------------------------------------*/ + + case 32: /* Address And Command Setup Time (measured in ns/1000) */ + if (dimmInfo.memoryType == MEM_TYPE_SDRAM) + { + rightOfPoint = (spdRawData[i] & 0x0f); + leftOfPoint = (spdRawData[i] & 0xf0) >> 4; + if(leftOfPoint > 7) + { + leftOfPoint *= -1; + } + } + else /* DDR1 or DDR2 */ + { + time_tmp = (((spdRawData[i] & 0xf0) >> 4)*10) + + ((spdRawData[i] & 0x0f)); + leftOfPoint = time_tmp / 100; + rightOfPoint = time_tmp % 100; + } + mvOsOutput("Address And Command Setup Time [ns]: %d.%d\n", + leftOfPoint, rightOfPoint); + break; +/*----------------------------------------------------------------------------*/ + + case 33: /* Address And Command Hold Time */ + if (dimmInfo.memoryType == MEM_TYPE_SDRAM) + { + rightOfPoint = (spdRawData[i] & 0x0f); + leftOfPoint = (spdRawData[i] & 0xf0) >> 4; + if(leftOfPoint > 7) + { + leftOfPoint *= -1; + } + } + else /* DDR1 or DDR2 */ + { + time_tmp = (((spdRawData[i] & 0xf0) >> 4)*10) + + ((spdRawData[i] & 0x0f)); + leftOfPoint = time_tmp / 100; + rightOfPoint = time_tmp % 100; + } + mvOsOutput("Address And Command Hold Time [ns]: %d.%d\n", + leftOfPoint, rightOfPoint); + break; +/*----------------------------------------------------------------------------*/ + + case 34: /* Data Input Setup Time */ + if (dimmInfo.memoryType == MEM_TYPE_SDRAM) + { + rightOfPoint = (spdRawData[i] & 0x0f); + leftOfPoint = (spdRawData[i] & 0xf0) >> 4; + if(leftOfPoint > 7) + { + leftOfPoint *= -1; + } + } + else /* DDR1 or DDR2 */ + { + time_tmp = (((spdRawData[i] & 0xf0) >> 4)*10) + + ((spdRawData[i] & 0x0f)); + leftOfPoint = time_tmp / 100; + rightOfPoint = time_tmp % 100; + } + mvOsOutput("Data Input Setup Time [ns]: %d.%d\n", + leftOfPoint, rightOfPoint); + break; +/*----------------------------------------------------------------------------*/ + + case 35: /* Data Input Hold Time */ + if (dimmInfo.memoryType == MEM_TYPE_SDRAM) + { + rightOfPoint = (spdRawData[i] & 0x0f); + leftOfPoint = (spdRawData[i] & 0xf0) >> 4; + if(leftOfPoint > 7) + { + leftOfPoint *= -1; + } + } + else /* DDR1 or DDR2 */ + { + time_tmp = (((spdRawData[i] & 0xf0) >> 4)*10) + + ((spdRawData[i] & 0x0f)); + leftOfPoint = time_tmp / 100; + rightOfPoint = time_tmp % 100; + } + mvOsOutput("Data Input Hold Time [ns]: %d.%d\n\n", + leftOfPoint, rightOfPoint); + break; +/*----------------------------------------------------------------------------*/ + + case 36: /* Relevant for DDR2 only: Write Recovery Time */ + leftOfPoint = ((spdRawData[i] & maskLeftOfPoint) >> 2); + rightOfPoint = (spdRawData[i] & maskRightOfPoint) * 25; + mvOsOutput("Write Recovery Time [ns]: %d.%d\n", + leftOfPoint, rightOfPoint); + break; +/*----------------------------------------------------------------------------*/ + } + +} + + +/* + * translate ns.ns/10 coding of SPD timing values + * into ps unit values + */ +/******************************************************************************* +* cas2ps - Translate x.y ns parameter to pico-seconds values +* +* DESCRIPTION: +* This function translates x.y nano seconds to its value in pico seconds. +* For example 3.75ns will return 3750. +* +* INPUT: +* spd_byte - DIMM SPD byte. +* +* OUTPUT: +* None. +* +* RETURN: +* value in pico seconds. +* +*******************************************************************************/ +static MV_U32 cas2ps(MV_U8 spd_byte) +{ + MV_U32 ns, ns10; + + /* isolate upper nibble */ + ns = (spd_byte >> 4) & 0x0F; + /* isolate lower nibble */ + ns10 = (spd_byte & 0x0F); + + if( ns10 < 10 ) { + ns10 *= 10; + } + else if( ns10 == 10 ) + ns10 = 25; + else if( ns10 == 11 ) + ns10 = 33; + else if( ns10 == 12 ) + ns10 = 66; + else if( ns10 == 13 ) + ns10 = 75; + else + { + mvOsOutput("cas2ps Err. unsupported cycle time.\n"); + } + + return (ns*1000 + ns10*10); +} + diff --git a/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/mv_hal/ddr2/spd/mvSpd.h b/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/mv_hal/ddr2/spd/mvSpd.h new file mode 100644 index 0000000000..f95546624c --- /dev/null +++ b/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/mv_hal/ddr2/spd/mvSpd.h @@ -0,0 +1,192 @@ +/******************************************************************************* +Copyright (C) Marvell International Ltd. and its affiliates + +This software file (the "File") is owned and distributed by Marvell +International Ltd. and/or its affiliates ("Marvell") under the following +alternative licensing terms. Once you have made an election to distribute the +File under one of the following license alternatives, please (i) delete this +introductory statement regarding license alternatives, (ii) delete the two +license alternatives that you have not elected to use and (iii) preserve the +Marvell copyright notice above. + +******************************************************************************** +Marvell Commercial License Option + +If you received this File from Marvell and you have entered into a commercial +license agreement (a "Commercial License") with Marvell, the File is licensed +to you under the terms of the applicable Commercial License. + +******************************************************************************** +Marvell GPL License Option + +If you received this File from Marvell, you may opt to use, redistribute and/or +modify this File in accordance with the terms and conditions of the General +Public License Version 2, June 1991 (the "GPL License"), a copy of which is +available along with the File in the license.txt file or by writing to the Free +Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or +on the worldwide web at http://www.gnu.org/licenses/gpl.txt. + +THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED +WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY +DISCLAIMED. The GPL License provides additional details about this warranty +disclaimer. +******************************************************************************** +Marvell BSD License Option + +If you received this File from Marvell, you may opt to use, redistribute and/or +modify this File under the following licensing terms. +Redistribution and use in source and binary forms, with or without modification, +are permitted provided that the following conditions are met: + + * Redistributions of source code must retain the above copyright notice, + this list of conditions and the following disclaimer. + + * Redistributions in binary form must reproduce the above copyright + notice, this list of conditions and the following disclaimer in the + documentation and/or other materials provided with the distribution. + + * Neither the name of Marvell nor the names of its contributors may be + used to endorse or promote products derived from this software without + specific prior written permission. + +THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND +ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED +WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE +DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR +ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES +(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; +LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON +ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS +SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + +*******************************************************************************/ + +#ifndef __INCmvDram +#define __INCmvDram + +#include "ddr2/mvDramIf.h" +#include "twsi/mvTwsi.h" + +#define MAX_DIMM_NUM 2 +#define SPD_SIZE 128 + +/* Dimm spd offsets */ +#define DIMM_MEM_TYPE 2 +#define DIMM_ROW_NUM 3 +#define DIMM_COL_NUM 4 +#define DIMM_MODULE_BANK_NUM 5 +#define DIMM_DATA_WIDTH 6 +#define DIMM_VOLT_IF 8 +#define DIMM_MIN_CC_AT_MAX_CAS 9 +#define DIMM_ERR_CHECK_TYPE 11 +#define DIMM_REFRESH_INTERVAL 12 +#define DIMM_SDRAM_WIDTH 13 +#define DIMM_ERR_CHECK_DATA_WIDTH 14 +#define DIMM_MIN_CLK_DEL 15 +#define DIMM_BURST_LEN_SUP 16 +#define DIMM_DEV_BANK_NUM 17 +#define DIMM_SUP_CAL 18 +#define DIMM_DDR2_TYPE_INFORMATION 20 /* DDR2 only */ +#define DIMM_BUF_ADDR_CONT_IN 21 +#define DIMM_MIN_CC_AT_MAX_CAS_MINUS1 23 +#define DIMM_MIN_CC_AT_MAX_CAS_MINUS2 25 +#define DIMM_MIN_ROW_PRECHARGE_TIME 27 +#define DIMM_MIN_ROW_ACTIVE_TO_ROW_ACTIVE 28 +#define DIMM_MIN_RAS_TO_CAS_DELAY 29 +#define DIMM_MIN_RAS_PULSE_WIDTH 30 +#define DIMM_BANK_DENSITY 31 +#define DIMM_MIN_WRITE_RECOVERY_TIME 36 +#define DIMM_MIN_WRITE_TO_READ_CMD_DELAY 37 +#define DIMM_MIN_READ_TO_PRECH_CMD_DELAY 38 +#define DIMM_MIN_REFRESH_TO_ACTIVATE_CMD 42 +#define DIMM_SPD_VERSION 62 + +/* Dimm Memory Type values */ +#define DIMM_MEM_TYPE_SDRAM 0x4 +#define DIMM_MEM_TYPE_DDR1 0x7 +#define DIMM_MEM_TYPE_DDR2 0x8 + +#define DIMM_MODULE_MANU_OFFS 64 +#define DIMM_MODULE_MANU_SIZE 8 +#define DIMM_MODULE_VEN_OFFS 73 +#define DIMM_MODULE_VEN_SIZE 25 +#define DIMM_MODULE_ID_OFFS 99 +#define DIMM_MODULE_ID_SIZE 18 + +/* enumeration for voltage levels. */ +typedef enum _mvDimmVoltageIf +{ + TTL_5V_TOLERANT, + LVTTL, + HSTL_1_5V, + SSTL_3_3V, + SSTL_2_5V, + VOLTAGE_UNKNOWN, +} MV_DIMM_VOLTAGE_IF; + + +/* enumaration for SDRAM CAS Latencies. */ +typedef enum _mvDimmSdramCas +{ + SD_CL_1 =1, + SD_CL_2, + SD_CL_3, + SD_CL_4, + SD_CL_5, + SD_CL_6, + SD_CL_7, + SD_FAULT +}MV_DIMM_SDRAM_CAS; + + +/* DIMM information structure */ +typedef struct _mvDimmInfo +{ + MV_MEMORY_TYPE memoryType; /* DDR or SDRAM */ + + MV_U8 spdRawData[SPD_SIZE]; /* Content of SPD-EEPROM copied 1:1 */ + + /* DIMM dimensions */ + MV_U32 numOfRowAddr; + MV_U32 numOfColAddr; + MV_U32 numOfModuleBanks; + MV_U32 dataWidth; + MV_U32 errorCheckType; /* ECC , PARITY..*/ + MV_U32 sdramWidth; /* 4,8,16 or 32 */ + MV_U32 errorCheckDataWidth; /* 0 - no, 1 - Yes */ + MV_U32 burstLengthSupported; + MV_U32 numOfBanksOnEachDevice; + MV_U32 suportedCasLatencies; + MV_U32 refreshInterval; + MV_U32 dimmBankDensity; + MV_U32 dimmTypeInfo; /* DDR2 only */ + MV_U32 dimmAttributes; + + /* DIMM timing parameters */ + MV_U32 minCycleTimeAtMaxCasLatPs; + MV_U32 minCycleTimeAtMaxCasLatMinus1Ps; + MV_U32 minCycleTimeAtMaxCasLatMinus2Ps; + MV_U32 minRowPrechargeTime; + MV_U32 minRowActiveToRowActive; + MV_U32 minRasToCasDelay; + MV_U32 minRasPulseWidth; + MV_U32 minWriteRecoveryTime; /* DDR2 only */ + MV_U32 minWriteToReadCmdDelay; /* DDR2 only */ + MV_U32 minReadToPrechCmdDelay; /* DDR2 only */ + MV_U32 minRefreshToActiveCmd; /* DDR2 only */ + + /* Parameters calculated from the extracted DIMM information */ + MV_U32 size; /* 16,64,128,256 or 512 MByte in MB units */ + MV_U32 deviceDensity; /* 16,64,128,256 or 512 Mbit in MB units */ + MV_U32 numberOfDevices; + +} MV_DIMM_INFO; + + +MV_STATUS mvDramBankInfoGet(MV_U32 bankNum, MV_DRAM_BANK_INFO *pBankInfo); +MV_STATUS dimmSpdGet(MV_U32 dimmNum, MV_DIMM_INFO *pDimmInfo); +MV_VOID dimmSpdPrint(MV_U32 dimmNum); +MV_STATUS dimmSpdCpy(MV_VOID); + +#endif /* __INCmvDram */ diff --git a/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/mv_hal/eth/gbe/mvEth.c b/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/mv_hal/eth/gbe/mvEth.c new file mode 100644 index 0000000000..d24e788fc7 --- /dev/null +++ b/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/mv_hal/eth/gbe/mvEth.c @@ -0,0 +1,2952 @@ +/******************************************************************************* +Copyright (C) Marvell International Ltd. and its affiliates + +This software file (the "File") is owned and distributed by Marvell +International Ltd. and/or its affiliates ("Marvell") under the following +alternative licensing terms. Once you have made an election to distribute the +File under one of the following license alternatives, please (i) delete this +introductory statement regarding license alternatives, (ii) delete the two +license alternatives that you have not elected to use and (iii) preserve the +Marvell copyright notice above. + +******************************************************************************** +Marvell Commercial License Option + +If you received this File from Marvell and you have entered into a commercial +license agreement (a "Commercial License") with Marvell, the File is licensed +to you under the terms of the applicable Commercial License. + +******************************************************************************** +Marvell GPL License Option + +If you received this File from Marvell, you may opt to use, redistribute and/or +modify this File in accordance with the terms and conditions of the General +Public License Version 2, June 1991 (the "GPL License"), a copy of which is +available along with the File in the license.txt file or by writing to the Free +Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or +on the worldwide web at http://www.gnu.org/licenses/gpl.txt. + +THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED +WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY +DISCLAIMED. The GPL License provides additional details about this warranty +disclaimer. +******************************************************************************** +Marvell BSD License Option + +If you received this File from Marvell, you may opt to use, redistribute and/or +modify this File under the following licensing terms. +Redistribution and use in source and binary forms, with or without modification, +are permitted provided that the following conditions are met: + + * Redistributions of source code must retain the above copyright notice, + this list of conditions and the following disclaimer. + + * Redistributions in binary form must reproduce the above copyright + notice, this list of conditions and the following disclaimer in the + documentation and/or other materials provided with the distribution. + + * Neither the name of Marvell nor the names of its contributors may be + used to endorse or promote products derived from this software without + specific prior written permission. + +THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND +ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED +WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE +DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR +ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES +(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; +LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON +ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS +SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + +*******************************************************************************/ + +/******************************************************************************* +* mvEth.c - Marvell's Gigabit Ethernet controller low level driver +* +* DESCRIPTION: +* This file introduce OS independent APIs to Marvell's Gigabit Ethernet +* controller. This Gigabit Ethernet Controller driver API controls +* 1) Operations (i.e. port Init, Finish, Up, Down, PhyReset etc'). +* 2) Data flow (i.e. port Send, Receive etc'). +* 3) MAC Filtering functions (ethSetMcastAddr, ethSetRxFilterMode, etc.) +* 4) MIB counters support (ethReadMibCounter) +* 5) Debug functions (ethPortRegs, ethPortCounters, ethPortQueues, etc.) +* Each Gigabit Ethernet port is controlled via ETH_PORT_CTRL struct. +* This struct includes configuration information as well as driver +* internal data needed for its operations. +* +* Supported Features: +* - OS independent. All required OS services are implemented via external +* OS dependent components (like osLayer or ethOsg) +* - The user is free from Rx/Tx queue managing. +* - Simple Gigabit Ethernet port operation API. +* - Simple Gigabit Ethernet port data flow API. +* - Data flow and operation API support per queue functionality. +* - Support cached descriptors for better performance. +* - PHY access and control API. +* - Port Configuration API. +* - Full control over Special and Other Multicast MAC tables. +* +*******************************************************************************/ +/* includes */ +#include "mvTypes.h" +#include "mv802_3.h" +#include "mvDebug.h" +#include "mvCommon.h" +#include "mvOs.h" +#include "ctrlEnv/mvCtrlEnvLib.h" +#include "eth-phy/mvEthPhy.h" +#include "eth/mvEth.h" +#include "eth/gbe/mvEthGbe.h" +#include "cpu/mvCpu.h" + +#ifdef INCLUDE_SYNC_BARR +#include "sys/mvCpuIf.h" +#endif + +#ifdef MV_RT_DEBUG +# define ETH_DEBUG +#endif + + +/* locals */ +MV_BOOL ethDescInSram; +MV_BOOL ethDescSwCoher; + +/* This array holds the control structure of each port */ +ETH_PORT_CTRL* ethPortCtrl[MV_ETH_MAX_PORTS]; + +/* Ethernet Port Local routines */ + +static void ethInitRxDescRing(ETH_PORT_CTRL* pPortCtrl, int queue); + +static void ethInitTxDescRing(ETH_PORT_CTRL* pPortCtrl, int queue); + +static void ethSetUcastTable(int portNo, int queue); + +static MV_BOOL ethSetUcastAddr (int ethPortNum, MV_U8 lastNibble, int queue); +static MV_BOOL ethSetSpecialMcastAddr(int ethPortNum, MV_U8 lastByte, int queue); +static MV_BOOL ethSetOtherMcastAddr(int ethPortNum, MV_U8 crc8, int queue); + +static void ethFreeDescrMemory(ETH_PORT_CTRL* pEthPortCtrl, MV_BUF_INFO* pDescBuf); +static MV_U8* ethAllocDescrMemory(ETH_PORT_CTRL* pEthPortCtrl, int size, + MV_ULONG* pPhysAddr, MV_U32 *memHandle); + +static MV_U32 mvEthMruGet(MV_U32 maxRxPktSize); + +static void mvEthPortSgmiiConfig(int port); + + + +/******************************************************************************/ +/* EthDrv Initialization functions */ +/******************************************************************************/ + +/******************************************************************************* +* mvEthHalInit - Initialize the Giga Ethernet unit +* +* DESCRIPTION: +* This function initialize the Giga Ethernet unit. +* 1) Configure Address decode windows of the unit +* 2) Set registers to HW default values. +* 3) Clear and Disable interrupts +* +* INPUT: NONE +* +* RETURN: NONE +* +* NOTE: this function is called once in the boot process. +*******************************************************************************/ +void mvEthHalInit(void) +{ + int port; + + /* Init static data structures */ + for (port=0; port 0) + { + isSram = MV_TRUE; + #if (INTEG_SRAM_COHER == MV_CACHE_COHER_SW) + isSwCoher = MV_TRUE; + #else + isSwCoher = MV_FALSE; + #endif + } +#endif /* ETH_DESCR_IN_SRAM */ + + if(pIsSram != NULL) + *pIsSram = isSram; + + if(pIsSwCoher != NULL) + *pIsSwCoher = isSwCoher; +} + + + +/******************************************************************************/ +/* Port Initialization functions */ +/******************************************************************************/ + +/******************************************************************************* +* mvEthPortInit - Initialize the Ethernet port driver +* +* DESCRIPTION: +* This function initialize the ethernet port. +* 1) Allocate and initialize internal port Control structure. +* 2) Create RX and TX descriptor rings for default RX and TX queues +* 3) Disable RX and TX operations, clear cause registers and +* mask all interrupts. +* 4) Set all registers to default values and clean all MAC tables. +* +* INPUT: +* int portNo - Ethernet port number +* ETH_PORT_INIT *pEthPortInit - Ethernet port init structure +* +* RETURN: +* void* - ethernet port handler, that should be passed to the most other +* functions dealing with this port. +* +* NOTE: This function is called once per port when loading the eth module. +*******************************************************************************/ +void* mvEthPortInit(int portNo, MV_ETH_PORT_INIT *pEthPortInit) +{ + int queue, descSize; + ETH_PORT_CTRL* pPortCtrl; + + /* Check validity of parameters */ + if( (portNo >= (int)mvCtrlEthMaxPortGet()) || + (pEthPortInit->rxDefQ >= MV_ETH_RX_Q_NUM) || + (pEthPortInit->maxRxPktSize < 1518) ) + { + mvOsPrintf("EthPort #%d: Bad initialization parameters\n", portNo); + return NULL; + } + if( (pEthPortInit->rxDescrNum[pEthPortInit->rxDefQ]) == 0) + { + mvOsPrintf("EthPort #%d: rxDefQ (%d) must be created\n", + portNo, pEthPortInit->rxDefQ); + return NULL; + } + + pPortCtrl = (ETH_PORT_CTRL*)mvOsMalloc( sizeof(ETH_PORT_CTRL) ); + if(pPortCtrl == NULL) + { + mvOsPrintf("EthDrv: Can't allocate %dB for port #%d control structure!\n", + (int)sizeof(ETH_PORT_CTRL), portNo); + return NULL; + } + + memset(pPortCtrl, 0, sizeof(ETH_PORT_CTRL) ); + ethPortCtrl[portNo] = pPortCtrl; + + pPortCtrl->portState = MV_UNDEFINED_STATE; + + pPortCtrl->portNo = portNo; + + pPortCtrl->osHandle = pEthPortInit->osHandle; + + /* Copy Configuration parameters */ + pPortCtrl->portConfig.maxRxPktSize = pEthPortInit->maxRxPktSize; + pPortCtrl->portConfig.rxDefQ = pEthPortInit->rxDefQ; + pPortCtrl->portConfig.ejpMode = 0; + + for( queue=0; queuerxQueueConfig[queue].descrNum = pEthPortInit->rxDescrNum[queue]; + } + for( queue=0; queuetxQueueConfig[queue].descrNum = pEthPortInit->txDescrNum[queue]; + } + + mvEthPortDisable(pPortCtrl); + + /* Set the board information regarding PHY address */ + mvEthPhyAddrSet(pPortCtrl, mvBoardPhyAddrGet(portNo) ); + + /* Create all requested RX queues */ + for(queue=0; queuerxQueueConfig[queue].descrNum == 0) + continue; + + /* Allocate memory for RX descriptors */ + descSize = ((pPortCtrl->rxQueueConfig[queue].descrNum * ETH_RX_DESC_ALIGNED_SIZE) + + CPU_D_CACHE_LINE_SIZE); + + pPortCtrl->rxQueue[queue].descBuf.bufVirtPtr = + ethAllocDescrMemory(pPortCtrl, descSize, + &pPortCtrl->rxQueue[queue].descBuf.bufPhysAddr, + &pPortCtrl->rxQueue[queue].descBuf.memHandle); + pPortCtrl->rxQueue[queue].descBuf.bufSize = descSize; + if(pPortCtrl->rxQueue[queue].descBuf.bufVirtPtr == NULL) + { + mvOsPrintf("EthPort #%d, rxQ=%d: Can't allocate %d bytes in %s for %d RX descr\n", + pPortCtrl->portNo, queue, descSize, + ethDescInSram ? "SRAM" : "DRAM", + pPortCtrl->rxQueueConfig[queue].descrNum); + return NULL; + } + + ethInitRxDescRing(pPortCtrl, queue); + } + /* Create TX queues */ + for(queue=0; queuetxQueueConfig[queue].descrNum == 0) + continue; + + /* Allocate memory for TX descriptors */ + descSize = ((pPortCtrl->txQueueConfig[queue].descrNum * ETH_TX_DESC_ALIGNED_SIZE) + + CPU_D_CACHE_LINE_SIZE); + + pPortCtrl->txQueue[queue].descBuf.bufVirtPtr = + ethAllocDescrMemory(pPortCtrl, descSize, + &pPortCtrl->txQueue[queue].descBuf.bufPhysAddr, + &pPortCtrl->txQueue[queue].descBuf.memHandle); + pPortCtrl->txQueue[queue].descBuf.bufSize = descSize; + if(pPortCtrl->txQueue[queue].descBuf.bufVirtPtr == NULL) + { + mvOsPrintf("EthPort #%d, txQ=%d: Can't allocate %d bytes in %s for %d TX descr\n", + pPortCtrl->portNo, queue, descSize, ethDescInSram ? "SRAM" : "DRAM", + pPortCtrl->txQueueConfig[queue].descrNum); + return NULL; + } + + ethInitTxDescRing(pPortCtrl, queue); + } + mvEthDefaultsSet(pPortCtrl); + + pPortCtrl->portState = MV_IDLE; + return pPortCtrl; +} + +/******************************************************************************* +* ethPortFinish - Finish the Ethernet port driver +* +* DESCRIPTION: +* This function finish the ethernet port. +* 1) Down ethernet port if needed. +* 2) Delete RX and TX descriptor rings for all created RX and TX queues +* 3) Free internal port Control structure. +* +* INPUT: +* void* pEthPortHndl - Ethernet port handler +* +* RETURN: NONE. +* +*******************************************************************************/ +void mvEthPortFinish(void* pPortHndl) +{ + ETH_PORT_CTRL* pPortCtrl = (ETH_PORT_CTRL*)pPortHndl; + int queue, portNo = pPortCtrl->portNo; + + if(pPortCtrl->portState == MV_ACTIVE) + { + mvOsPrintf("ethPort #%d: Warning !!! Finish port in Active state\n", + portNo); + mvEthPortDisable(pPortHndl); + } + + /* Free all allocated RX queues */ + for(queue=0; queuerxQueue[queue].descBuf); + } + + /* Free all allocated TX queues */ + for(queue=0; queuetxQueue[queue].descBuf); + } + + /* Free port control structure */ + mvOsFree(pPortCtrl); + + ethPortCtrl[portNo] = NULL; +} + +/******************************************************************************* +* mvEthDefaultsSet - Set defaults to the ethernet port +* +* DESCRIPTION: +* This function set default values to the ethernet port. +* 1) Clear Cause registers and Mask all interrupts +* 2) Clear all MAC tables +* 3) Set defaults to all registers +* 4) Reset all created RX and TX descriptors ring +* 5) Reset PHY +* +* INPUT: +* void* pEthPortHndl - Ethernet port handler +* +* RETURN: MV_STATUS +* MV_OK - Success, Others - Failure +* NOTE: +* This function update all the port configuration except those set +* Initialy by the OsGlue by MV_ETH_PORT_INIT. +* This function can be called after portDown to return the port setting +* to defaults. +*******************************************************************************/ +MV_STATUS mvEthDefaultsSet(void* pPortHndl) +{ + int ethPortNo, queue; + ETH_PORT_CTRL* pPortCtrl = (ETH_PORT_CTRL*)pPortHndl; + ETH_QUEUE_CTRL* pQueueCtrl; + MV_U32 txPrio; + MV_U32 portCfgReg, portCfgExtReg, portSerialCtrlReg, portSerialCtrl1Reg, portSdmaCfgReg; + MV_BOARD_MAC_SPEED boardMacCfg; + + ethPortNo = pPortCtrl->portNo; + + /* Clear Cause registers */ + MV_REG_WRITE(ETH_INTR_CAUSE_REG(ethPortNo),0); + MV_REG_WRITE(ETH_INTR_CAUSE_EXT_REG(ethPortNo),0); + + /* Mask all interrupts */ + MV_REG_WRITE(ETH_INTR_MASK_REG(ethPortNo),0); + MV_REG_WRITE(ETH_INTR_MASK_EXT_REG(ethPortNo),0); + + portCfgReg = PORT_CONFIG_VALUE; + portCfgExtReg = PORT_CONFIG_EXTEND_VALUE; + + boardMacCfg = mvBoardMacSpeedGet(ethPortNo); + + if(boardMacCfg == BOARD_MAC_SPEED_100M) + { + portSerialCtrlReg = PORT_SERIAL_CONTROL_100MB_FORCE_VALUE; + } + else if(boardMacCfg == BOARD_MAC_SPEED_1000M) + { + portSerialCtrlReg = PORT_SERIAL_CONTROL_1000MB_FORCE_VALUE; + } + else + { + portSerialCtrlReg = PORT_SERIAL_CONTROL_VALUE; + } + + /* build PORT_SDMA_CONFIG_REG */ + portSdmaCfgReg = ETH_TX_INTR_COAL_MASK(0); + portSdmaCfgReg |= ETH_TX_BURST_SIZE_MASK(ETH_BURST_SIZE_16_64BIT_VALUE); + +#if ( (ETHER_DRAM_COHER == MV_CACHE_COHER_HW_WB) || \ + (ETHER_DRAM_COHER == MV_CACHE_COHER_HW_WT) ) + /* some devices have restricted RX burst size when using HW coherency */ + portSdmaCfgReg |= ETH_RX_BURST_SIZE_MASK(ETH_BURST_SIZE_4_64BIT_VALUE); +#else + portSdmaCfgReg |= ETH_RX_BURST_SIZE_MASK(ETH_BURST_SIZE_16_64BIT_VALUE); +#endif + +#if defined(MV_CPU_BE) + /* big endian */ +# if defined(MV_ARM) + portSdmaCfgReg |= (ETH_RX_NO_DATA_SWAP_MASK | + ETH_TX_NO_DATA_SWAP_MASK | + ETH_DESC_SWAP_MASK); +# elif defined(MV_PPC) + portSdmaCfgReg |= (ETH_RX_DATA_SWAP_MASK | + ETH_TX_DATA_SWAP_MASK | + ETH_NO_DESC_SWAP_MASK); +# else +# error "Giga Ethernet Swap policy is not defined for the CPU_ARCH" +# endif /* MV_ARM / MV_PPC */ + +#else /* MV_CPU_LE */ + /* little endian */ + portSdmaCfgReg |= (ETH_RX_NO_DATA_SWAP_MASK | + ETH_TX_NO_DATA_SWAP_MASK | + ETH_NO_DESC_SWAP_MASK); +#endif /* MV_CPU_BE / MV_CPU_LE */ + + pPortCtrl->portRxQueueCmdReg = 0; + pPortCtrl->portTxQueueCmdReg = 0; + +#if (MV_ETH_VERSION >= 4) + if(pPortCtrl->portConfig.ejpMode == MV_TRUE) + { + MV_REG_WRITE(ETH_TXQ_CMD_1_REG(ethPortNo), ETH_TX_EJP_ENABLE_MASK); + } + else + { + MV_REG_WRITE(ETH_TXQ_CMD_1_REG(ethPortNo), 0) + } +#endif /* (MV_ETH_VERSION >= 4) */ + + ethSetUcastTable(ethPortNo, -1); + mvEthSetSpecialMcastTable(ethPortNo, -1); + mvEthSetOtherMcastTable(ethPortNo, -1); + + portSerialCtrlReg &= ~ETH_MAX_RX_PACKET_SIZE_MASK; + + portSerialCtrlReg |= mvEthMruGet(pPortCtrl->portConfig.maxRxPktSize); + + MV_REG_WRITE(ETH_PORT_SERIAL_CTRL_REG(ethPortNo), portSerialCtrlReg); + + /* Update value of PortConfig register accordingly with all RxQueue types */ + pPortCtrl->portConfig.rxArpQ = pPortCtrl->portConfig.rxDefQ; + pPortCtrl->portConfig.rxBpduQ = pPortCtrl->portConfig.rxDefQ; + pPortCtrl->portConfig.rxTcpQ = pPortCtrl->portConfig.rxDefQ; + pPortCtrl->portConfig.rxUdpQ = pPortCtrl->portConfig.rxDefQ; + + portCfgReg &= ~ETH_DEF_RX_QUEUE_ALL_MASK; + portCfgReg |= ETH_DEF_RX_QUEUE_MASK(pPortCtrl->portConfig.rxDefQ); + + portCfgReg &= ~ETH_DEF_RX_ARP_QUEUE_ALL_MASK; + portCfgReg |= ETH_DEF_RX_ARP_QUEUE_MASK(pPortCtrl->portConfig.rxArpQ); + + portCfgReg &= ~ETH_DEF_RX_BPDU_QUEUE_ALL_MASK; + portCfgReg |= ETH_DEF_RX_BPDU_QUEUE_MASK(pPortCtrl->portConfig.rxBpduQ); + + portCfgReg &= ~ETH_DEF_RX_TCP_QUEUE_ALL_MASK; + portCfgReg |= ETH_DEF_RX_TCP_QUEUE_MASK(pPortCtrl->portConfig.rxTcpQ); + + portCfgReg &= ~ETH_DEF_RX_UDP_QUEUE_ALL_MASK; + portCfgReg |= ETH_DEF_RX_UDP_QUEUE_MASK(pPortCtrl->portConfig.rxUdpQ); + + /* Assignment of Tx CTRP of given queue */ + txPrio = 0; + + for(queue=0; queuetxQueue[queue]; + + if(pQueueCtrl->pFirstDescr != NULL) + { + ethResetTxDescRing(pPortCtrl, queue); + + MV_REG_WRITE(ETH_TXQ_TOKEN_COUNT_REG(ethPortNo, queue), + 0x3fffffff); + MV_REG_WRITE(ETH_TXQ_TOKEN_CFG_REG(ethPortNo, queue), + 0x03ffffff); + } + else + { + MV_REG_WRITE(ETH_TXQ_TOKEN_COUNT_REG(ethPortNo, queue), 0x0); + MV_REG_WRITE(ETH_TXQ_TOKEN_CFG_REG(ethPortNo, queue), 0x0); + } + } + + /* Assignment of Rx CRDP of given queue */ + for(queue=0; queueportNo; + + if( (pPortCtrl->portState != MV_ACTIVE) && + (pPortCtrl->portState != MV_PAUSED) ) + { + mvOsPrintf("ethDrv port%d: Unexpected port state %d\n", + ethPortNo, pPortCtrl->portState); + return MV_BAD_STATE; + } + + ethPortNo = pPortCtrl->portNo; + + /* Enable port RX. */ + MV_REG_WRITE(ETH_RX_QUEUE_COMMAND_REG(ethPortNo), pPortCtrl->portRxQueueCmdReg); + + /* Enable port TX. */ + MV_REG_VALUE(ETH_TX_QUEUE_COMMAND_REG(ethPortNo)) = pPortCtrl->portTxQueueCmdReg; + + pPortCtrl->portState = MV_ACTIVE; + + return MV_OK; +} + +/******************************************************************************* +* ethPortDown - Stop the Ethernet port activity. +* +* DESCRIPTION: +* +* INPUT: +* void* pEthPortHndl - Ethernet port handler +* +* RETURN: MV_STATUS +* MV_OK - Success, Others - Failure. +* +* NOTE : used for port link down. +*******************************************************************************/ +MV_STATUS mvEthPortDown(void* pEthPortHndl) +{ + ETH_PORT_CTRL* pPortCtrl = (ETH_PORT_CTRL*)pEthPortHndl; + int ethPortNum = pPortCtrl->portNo; + unsigned int regData; + volatile int uDelay, mDelay; + + /* Stop Rx port activity. Check port Rx activity. */ + regData = (MV_REG_READ(ETH_RX_QUEUE_COMMAND_REG(ethPortNum))) & ETH_RXQ_ENABLE_MASK; + if(regData != 0) + { + /* Issue stop command for active channels only */ + MV_REG_WRITE(ETH_RX_QUEUE_COMMAND_REG(ethPortNum), (regData << ETH_RXQ_DISABLE_OFFSET)); + } + + /* Stop Tx port activity. Check port Tx activity. */ + regData = (MV_REG_READ(ETH_TX_QUEUE_COMMAND_REG(ethPortNum))) & ETH_TXQ_ENABLE_MASK; + if(regData != 0) + { + /* Issue stop command for active channels only */ + MV_REG_WRITE(ETH_TX_QUEUE_COMMAND_REG(ethPortNum), + (regData << ETH_TXQ_DISABLE_OFFSET) ); + } + + /* Force link down */ +/* + regData = MV_REG_READ(ETH_PORT_SERIAL_CTRL_REG(ethPortNum)); + regData &= ~(ETH_DO_NOT_FORCE_LINK_FAIL_MASK); + MV_REG_WRITE(ETH_PORT_SERIAL_CTRL_REG(ethPortNum), regData); +*/ + /* Wait for all Rx activity to terminate. */ + mDelay = 0; + do + { + if(mDelay >= RX_DISABLE_TIMEOUT_MSEC) + { + mvOsPrintf("ethPort_%d: TIMEOUT for RX stopped !!! rxQueueCmd - 0x08%x\n", + ethPortNum, regData); + break; + } + mvOsDelay(1); + mDelay++; + + /* Check port RX Command register that all Rx queues are stopped */ + regData = MV_REG_READ(ETH_RX_QUEUE_COMMAND_REG(ethPortNum)); + } + while(regData & 0xFF); + + /* Wait for all Tx activity to terminate. */ + mDelay = 0; + do + { + if(mDelay >= TX_DISABLE_TIMEOUT_MSEC) + { + mvOsPrintf("ethPort_%d: TIMEOUT for TX stoped !!! txQueueCmd - 0x08%x\n", + ethPortNum, regData); + break; + } + mvOsDelay(1); + mDelay++; + + /* Check port TX Command register that all Tx queues are stopped */ + regData = MV_REG_READ(ETH_TX_QUEUE_COMMAND_REG(ethPortNum)); + } + while(regData & 0xFF); + + /* Double check to Verify that TX FIFO is Empty */ + mDelay = 0; + while(MV_TRUE) + { + do + { + if(mDelay >= TX_FIFO_EMPTY_TIMEOUT_MSEC) + { + mvOsPrintf("\n ethPort_%d: TIMEOUT for TX FIFO empty !!! portStatus - 0x08%x\n", + ethPortNum, regData); + break; + } + mvOsDelay(1); + mDelay++; + + regData = MV_REG_READ(ETH_PORT_STATUS_REG(ethPortNum)); + } + while( ((regData & ETH_TX_FIFO_EMPTY_MASK) == 0) || + ((regData & ETH_TX_IN_PROGRESS_MASK) != 0) ); + + if(mDelay >= TX_FIFO_EMPTY_TIMEOUT_MSEC) + break; + + /* Double check */ + regData = MV_REG_READ(ETH_PORT_STATUS_REG(ethPortNum)); + if( ((regData & ETH_TX_FIFO_EMPTY_MASK) != 0) && + ((regData & ETH_TX_IN_PROGRESS_MASK) == 0) ) + { + break; + } + else + mvOsPrintf("ethPort_%d: TX FIFO Empty double check failed. %d msec, portStatus=0x%x\n", + ethPortNum, mDelay, regData); + } + + /* Do NOT force link down */ +/* + regData = MV_REG_READ(ETH_PORT_SERIAL_CTRL_REG(ethPortNum)); + regData |= (ETH_DO_NOT_FORCE_LINK_FAIL_MASK); + MV_REG_WRITE(ETH_PORT_SERIAL_CTRL_REG(ethPortNum), regData); +*/ + /* Wait about 2500 tclk cycles */ + uDelay = (PORT_DISABLE_WAIT_TCLOCKS/(mvBoardTclkGet()/1000000)); + mvOsUDelay(uDelay); + + pPortCtrl->portState = MV_PAUSED; + + return MV_OK; +} + + +/******************************************************************************* +* ethPortEnable - Enable the Ethernet port and Start RX and TX. +* +* DESCRIPTION: +* This routine enable the Ethernet port and Rx and Tx activity: +* +* Note: Each Rx and Tx queue descriptor's list must be initialized prior +* to calling this function (use etherInitTxDescRing for Tx queues and +* etherInitRxDescRing for Rx queues). +* +* INPUT: +* void* pEthPortHndl - Ethernet port handler +* +* RETURN: MV_STATUS +* MV_OK - Success, Others - Failure. +* +* NOTE: main usage is to enable the port after ifconfig up. +*******************************************************************************/ +MV_STATUS mvEthPortEnable(void* pEthPortHndl) +{ + int ethPortNo; + ETH_PORT_CTRL* pPortCtrl = (ETH_PORT_CTRL*)pEthPortHndl; + MV_U32 portSerialCtrlReg; + + ethPortNo = pPortCtrl->portNo; + + /* Enable port */ + portSerialCtrlReg = MV_REG_READ(ETH_PORT_SERIAL_CTRL_REG(ethPortNo)); + portSerialCtrlReg |= (ETH_DO_NOT_FORCE_LINK_FAIL_MASK | ETH_PORT_ENABLE_MASK); + + MV_REG_WRITE(ETH_PORT_SERIAL_CTRL_REG(ethPortNo), portSerialCtrlReg); + + mvEthMibCountersClear(pEthPortHndl); + + pPortCtrl->portState = MV_PAUSED; + + /* If Link is UP, Start RX and TX traffic */ + if( MV_REG_READ( ETH_PORT_STATUS_REG(ethPortNo) ) & ETH_LINK_UP_MASK) + return( mvEthPortUp(pEthPortHndl) ); + + return MV_NOT_READY; +} + + +/******************************************************************************* +* mvEthPortDisable - Stop RX and TX activities and Disable the Ethernet port. +* +* DESCRIPTION: +* +* INPUT: +* void* pEthPortHndl - Ethernet port handler +* +* RETURN: MV_STATUS +* MV_OK - Success, Others - Failure. +* +* NOTE: main usage is to disable the port after ifconfig down. +*******************************************************************************/ +MV_STATUS mvEthPortDisable(void* pEthPortHndl) +{ + ETH_PORT_CTRL* pPortCtrl = (ETH_PORT_CTRL*)pEthPortHndl; + int ethPortNum = pPortCtrl->portNo; + unsigned int regData; + volatile int mvDelay; + + if(pPortCtrl->portState == MV_ACTIVE) + { + /* Stop RX and TX activities */ + mvEthPortDown(pEthPortHndl); + } + + /* Reset the Enable bit in the Serial Control Register */ + regData = MV_REG_READ(ETH_PORT_SERIAL_CTRL_REG(ethPortNum)); + regData &= ~(ETH_PORT_ENABLE_MASK); + MV_REG_WRITE(ETH_PORT_SERIAL_CTRL_REG(ethPortNum), regData); + + /* Wait about 2500 tclk cycles */ + mvDelay = (PORT_DISABLE_WAIT_TCLOCKS*(mvCpuPclkGet()/mvBoardTclkGet())); + for(mvDelay; mvDelay>0; mvDelay--); + + pPortCtrl->portState = MV_IDLE; + return MV_OK; +} + +/******************************************************************************* +* mvEthPortForceTxDone - Get next buffer from TX queue in spite of buffer ownership. +* +* DESCRIPTION: +* This routine used to free buffers attached to the Tx ring and should +* be called only when Giga Ethernet port is Down +* +* INPUT: +* void* pEthPortHndl - Ethernet Port handler. +* int txQueue - Number of TX queue. +* +* OUTPUT: +* MV_PKT_INFO *pPktInfo - Pointer to packet was sent. +* +* RETURN: +* MV_EMPTY - There is no more buffers in this queue. +* MV_OK - Buffer detached from the queue and pPktInfo structure +* filled with relevant information. +* +*******************************************************************************/ +MV_PKT_INFO* mvEthPortForceTxDone(void* pEthPortHndl, int txQueue) +{ + ETH_PORT_CTRL* pPortCtrl = (ETH_PORT_CTRL*)pEthPortHndl; + ETH_QUEUE_CTRL* pQueueCtrl; + MV_PKT_INFO* pPktInfo; + ETH_TX_DESC* pTxDesc; + int port = pPortCtrl->portNo; + + pQueueCtrl = &pPortCtrl->txQueue[txQueue]; + + while( (pQueueCtrl->pUsedDescr != pQueueCtrl->pCurrentDescr) || + (pQueueCtrl->resource == 0) ) + { + /* Free next descriptor */ + pQueueCtrl->resource++; + pTxDesc = (ETH_TX_DESC*)pQueueCtrl->pUsedDescr; + + /* pPktInfo is available only in descriptors which are last descriptors */ + pPktInfo = (MV_PKT_INFO*)pTxDesc->returnInfo; + if (pPktInfo) + pPktInfo->status = pTxDesc->cmdSts; + + pTxDesc->cmdSts = 0x0; + pTxDesc->returnInfo = 0x0; + ETH_DESCR_FLUSH_INV(pPortCtrl, pTxDesc); + + pQueueCtrl->pUsedDescr = TX_NEXT_DESC_PTR(pTxDesc, pQueueCtrl); + + if (pPktInfo) + if (pPktInfo->status & ETH_TX_LAST_DESC_MASK) + return pPktInfo; + } + MV_REG_WRITE( ETH_TX_CUR_DESC_PTR_REG(port, txQueue), + (MV_U32)ethDescVirtToPhy(pQueueCtrl, pQueueCtrl->pCurrentDescr) ); + return NULL; +} + + + +/******************************************************************************* +* mvEthPortForceRx - Get next buffer from RX queue in spite of buffer ownership. +* +* DESCRIPTION: +* This routine used to free buffers attached to the Rx ring and should +* be called only when Giga Ethernet port is Down +* +* INPUT: +* void* pEthPortHndl - Ethernet Port handler. +* int rxQueue - Number of Rx queue. +* +* OUTPUT: +* MV_PKT_INFO *pPktInfo - Pointer to received packet. +* +* RETURN: +* MV_EMPTY - There is no more buffers in this queue. +* MV_OK - Buffer detached from the queue and pBufInfo structure +* filled with relevant information. +* +*******************************************************************************/ +MV_PKT_INFO* mvEthPortForceRx(void* pEthPortHndl, int rxQueue) +{ + ETH_PORT_CTRL* pPortCtrl = (ETH_PORT_CTRL*)pEthPortHndl; + ETH_QUEUE_CTRL* pQueueCtrl; + ETH_RX_DESC* pRxDesc; + MV_PKT_INFO* pPktInfo; + int port = pPortCtrl->portNo; + + pQueueCtrl = &pPortCtrl->rxQueue[rxQueue]; + + if(pQueueCtrl->resource == 0) + { + MV_REG_WRITE( ETH_RX_CUR_DESC_PTR_REG(port, rxQueue), + (MV_U32)ethDescVirtToPhy(pQueueCtrl, pQueueCtrl->pCurrentDescr) ); + + return NULL; + } + /* Free next descriptor */ + pQueueCtrl->resource--; + pRxDesc = (ETH_RX_DESC*)pQueueCtrl->pCurrentDescr; + pPktInfo = (MV_PKT_INFO*)pRxDesc->returnInfo; + + pPktInfo->status = pRxDesc->cmdSts; + pRxDesc->cmdSts = 0x0; + pRxDesc->returnInfo = 0x0; + ETH_DESCR_FLUSH_INV(pPortCtrl, pRxDesc); + + pQueueCtrl->pCurrentDescr = RX_NEXT_DESC_PTR(pRxDesc, pQueueCtrl); + return pPktInfo; +} + + +/******************************************************************************/ +/* Port Configuration functions */ +/******************************************************************************/ +/******************************************************************************* +* mvEthMruGet - Get MRU configuration for Max Rx packet size. +* +* INPUT: +* MV_U32 maxRxPktSize - max packet size. +* +* RETURN: MV_U32 - MRU configuration. +* +*******************************************************************************/ +static MV_U32 mvEthMruGet(MV_U32 maxRxPktSize) +{ + MV_U32 portSerialCtrlReg = 0; + + if(maxRxPktSize > 9192) + portSerialCtrlReg |= ETH_MAX_RX_PACKET_9700BYTE; + else if(maxRxPktSize > 9022) + portSerialCtrlReg |= ETH_MAX_RX_PACKET_9192BYTE; + else if(maxRxPktSize > 1552) + portSerialCtrlReg |= ETH_MAX_RX_PACKET_9022BYTE; + else if(maxRxPktSize > 1522) + portSerialCtrlReg |= ETH_MAX_RX_PACKET_1552BYTE; + else if(maxRxPktSize > 1518) + portSerialCtrlReg |= ETH_MAX_RX_PACKET_1522BYTE; + else + portSerialCtrlReg |= ETH_MAX_RX_PACKET_1518BYTE; + + return portSerialCtrlReg; +} + +/******************************************************************************* +* mvEthRxCoalSet - Sets coalescing interrupt mechanism on RX path +* +* DESCRIPTION: +* This routine sets the RX coalescing interrupt mechanism parameter. +* This parameter is a timeout counter, that counts in 64 tClk +* chunks, that when timeout event occurs a maskable interrupt occurs. +* The parameter is calculated using the tCLK frequency of the +* MV-64xxx chip, and the required number is in micro seconds. +* +* INPUT: +* void* pPortHndl - Ethernet Port handler. +* MV_U32 uSec - Number of micro seconds between +* RX interrupts +* +* RETURN: +* None. +* +* COMMENT: +* 1 sec - TCLK_RATE clocks +* 1 uSec - TCLK_RATE / 1,000,000 clocks +* +* Register Value for N micro seconds - ((N * ( (TCLK_RATE / 1,000,000)) / 64) +* +* RETURN: +* None. +* +*******************************************************************************/ +MV_U32 mvEthRxCoalSet (void* pPortHndl, MV_U32 uSec) +{ + ETH_PORT_CTRL* pPortCtrl = (ETH_PORT_CTRL*)pPortHndl; + MV_U32 coal = ((uSec * (mvBoardTclkGet() / 1000000)) / 64); + MV_U32 portSdmaCfgReg; + + portSdmaCfgReg = MV_REG_READ(ETH_SDMA_CONFIG_REG(pPortCtrl->portNo)); + portSdmaCfgReg &= ~ETH_RX_INTR_COAL_ALL_MASK; + + portSdmaCfgReg |= ETH_RX_INTR_COAL_MASK(coal); + +#if (MV_ETH_VERSION >= 2) + /* Set additional bit if needed ETH_RX_INTR_COAL_MSB_BIT (25) */ + if(ETH_RX_INTR_COAL_MASK(coal) > ETH_RX_INTR_COAL_ALL_MASK) + portSdmaCfgReg |= ETH_RX_INTR_COAL_MSB_MASK; +#endif /* MV_ETH_VERSION >= 2 */ + + MV_REG_WRITE (ETH_SDMA_CONFIG_REG(pPortCtrl->portNo), portSdmaCfgReg); + return coal; +} + +/******************************************************************************* +* mvEthTxCoalSet - Sets coalescing interrupt mechanism on TX path +* +* DESCRIPTION: +* This routine sets the TX coalescing interrupt mechanism parameter. +* This parameter is a timeout counter, that counts in 64 tClk +* chunks, that when timeout event occurs a maskable interrupt +* occurs. +* The parameter is calculated using the tCLK frequency of the +* MV-64xxx chip, and the required number is in micro seconds. +* +* INPUT: +* void* pPortHndl - Ethernet Port handler. +* MV_U32 uSec - Number of micro seconds between +* RX interrupts +* +* RETURN: +* None. +* +* COMMENT: +* 1 sec - TCLK_RATE clocks +* 1 uSec - TCLK_RATE / 1,000,000 clocks +* +* Register Value for N micro seconds - ((N * ( (TCLK_RATE / 1,000,000)) / 64) +* +*******************************************************************************/ +MV_U32 mvEthTxCoalSet(void* pPortHndl, MV_U32 uSec) +{ + ETH_PORT_CTRL* pPortCtrl = (ETH_PORT_CTRL*)pPortHndl; + MV_U32 coal = ((uSec * (mvBoardTclkGet() / 1000000)) / 64); + MV_U32 regVal; + + regVal = MV_REG_READ(ETH_TX_FIFO_URGENT_THRESH_REG(pPortCtrl->portNo)); + regVal &= ~ETH_TX_INTR_COAL_ALL_MASK; + regVal |= ETH_TX_INTR_COAL_MASK(coal); + + /* Set TX Coalescing mechanism */ + MV_REG_WRITE (ETH_TX_FIFO_URGENT_THRESH_REG(pPortCtrl->portNo), regVal); + return coal; +} + +/******************************************************************************* +* mvEthCoalGet - Gets RX and TX coalescing values in micro seconds +* +* DESCRIPTION: +* This routine gets the RX and TX coalescing interrupt values. +* The parameter is calculated using the tCLK frequency of the +* MV-64xxx chip, and the returned numbers are in micro seconds. +* +* INPUTs: +* void* pPortHndl - Ethernet Port handler. +* +* OUTPUTs: +* MV_U32* pRxCoal - Number of micro seconds between RX interrupts +* MV_U32* pTxCoal - Number of micro seconds between TX interrupts +* +* RETURN: +* MV_STATUS MV_OK - success +* Others - failure. +* +* COMMENT: +* 1 sec - TCLK_RATE clocks +* 1 uSec - TCLK_RATE / 1,000,000 clocks +* +* Register Value for N micro seconds - ((N * ( (TCLK_RATE / 1,000,000)) / 64) +* +*******************************************************************************/ +MV_STATUS mvEthCoalGet(void* pPortHndl, MV_U32* pRxCoal, MV_U32* pTxCoal) +{ + MV_U32 regVal, coal, usec; + + ETH_PORT_CTRL* pPortCtrl = (ETH_PORT_CTRL*)pPortHndl; + + /* get TX Coalescing */ + regVal = MV_REG_READ (ETH_TX_FIFO_URGENT_THRESH_REG(pPortCtrl->portNo)); + coal = ((regVal & ETH_TX_INTR_COAL_ALL_MASK) >> ETH_TX_INTR_COAL_OFFSET); + + usec = (coal * 64) / (mvBoardTclkGet() / 1000000); + if(pTxCoal != NULL) + *pTxCoal = usec; + + /* Get RX Coalescing */ + regVal = MV_REG_READ(ETH_SDMA_CONFIG_REG(pPortCtrl->portNo)); + coal = ((regVal & ETH_RX_INTR_COAL_ALL_MASK) >> ETH_RX_INTR_COAL_OFFSET); + +#if (MV_ETH_VERSION >= 2) + if(regVal & ETH_RX_INTR_COAL_MSB_MASK) + { + /* Add MSB */ + coal |= (ETH_RX_INTR_COAL_ALL_MASK + 1); + } +#endif /* MV_ETH_VERSION >= 2 */ + + usec = (coal * 64) / (mvBoardTclkGet() / 1000000); + if(pRxCoal != NULL) + *pRxCoal = usec; + + return MV_OK; +} + +/******************************************************************************* +* mvEthMaxRxSizeSet - +* +* DESCRIPTION: +* Change maximum receive size of the port. This configuration will take place +* after next call of ethPortSetDefaults() function. +* +* INPUT: +* +* RETURN: +*******************************************************************************/ +MV_STATUS mvEthMaxRxSizeSet(void* pPortHndl, int maxRxSize) +{ + ETH_PORT_CTRL* pPortCtrl = (ETH_PORT_CTRL*)pPortHndl; + MV_U32 portSerialCtrlReg; + + if((maxRxSize < 1518) || (maxRxSize & ~ETH_RX_BUFFER_MASK)) + return MV_BAD_PARAM; + + pPortCtrl->portConfig.maxRxPktSize = maxRxSize; + + portSerialCtrlReg = MV_REG_READ(ETH_PORT_SERIAL_CTRL_REG(pPortCtrl->portNo)); + portSerialCtrlReg &= ~ETH_MAX_RX_PACKET_SIZE_MASK; + portSerialCtrlReg |= mvEthMruGet(pPortCtrl->portConfig.maxRxPktSize); + MV_REG_WRITE(ETH_PORT_SERIAL_CTRL_REG(pPortCtrl->portNo), portSerialCtrlReg); + + return MV_OK; +} + + +/******************************************************************************/ +/* MAC Filtering functions */ +/******************************************************************************/ + +/******************************************************************************* +* mvEthRxFilterModeSet - Configure Fitering mode of Ethernet port +* +* DESCRIPTION: +* This routine used to free buffers attached to the Rx ring and should +* be called only when Giga Ethernet port is Down +* +* INPUT: +* void* pEthPortHndl - Ethernet Port handler. +* MV_BOOL isPromisc - Promiscous mode +* MV_TRUE - accept all Broadcast, Multicast +* and Unicast packets +* MV_FALSE - accept all Broadcast, +* specially added Multicast and +* single Unicast packets +* +* RETURN: MV_STATUS MV_OK - Success, Other - Failure +* +*******************************************************************************/ +MV_STATUS mvEthRxFilterModeSet(void* pEthPortHndl, MV_BOOL isPromisc) +{ + ETH_PORT_CTRL* pPortCtrl = (ETH_PORT_CTRL*)pEthPortHndl; + int queue; + MV_U32 portCfgReg; + + portCfgReg = MV_REG_READ(ETH_PORT_CONFIG_REG(pPortCtrl->portNo)); + /* Set / Clear UPM bit in port configuration register */ + if(isPromisc) + { + /* Accept all multicast packets to RX default queue */ + queue = pPortCtrl->portConfig.rxDefQ; + portCfgReg |= ETH_UNICAST_PROMISCUOUS_MODE_MASK; + memset(pPortCtrl->mcastCount, 1, sizeof(pPortCtrl->mcastCount)); + MV_REG_WRITE(ETH_MAC_ADDR_LOW_REG(pPortCtrl->portNo),0xFFFF); + MV_REG_WRITE(ETH_MAC_ADDR_HIGH_REG(pPortCtrl->portNo),0xFFFFFFFF); + } + else + { + /* Reject all Multicast addresses */ + queue = -1; + portCfgReg &= ~ETH_UNICAST_PROMISCUOUS_MODE_MASK; + /* Clear all mcastCount */ + memset(pPortCtrl->mcastCount, 0, sizeof(pPortCtrl->mcastCount)); + } + MV_REG_WRITE(ETH_PORT_CONFIG_REG(pPortCtrl->portNo), portCfgReg); + + /* Set Special Multicast and Other Multicast tables */ + mvEthSetSpecialMcastTable(pPortCtrl->portNo, queue); + mvEthSetOtherMcastTable(pPortCtrl->portNo, queue); + ethSetUcastTable(pPortCtrl->portNo, queue); + + return MV_OK; +} + +/******************************************************************************* +* mvEthMacAddrSet - This function Set the port Unicast address. +* +* DESCRIPTION: +* This function Set the port Ethernet MAC address. This address +* will be used to send Pause frames if enabled. Packets with this +* address will be accepted and dispatched to default RX queue +* +* INPUT: +* void* pEthPortHndl - Ethernet port handler. +* char* pAddr - Address to be set +* +* RETURN: MV_STATUS +* MV_OK - Success, Other - Faulure +* +*******************************************************************************/ +MV_STATUS mvEthMacAddrSet(void* pPortHndl, unsigned char *pAddr, int queue) +{ + ETH_PORT_CTRL* pPortCtrl = (ETH_PORT_CTRL*)pPortHndl; + unsigned int macH; + unsigned int macL; + + if(queue >= MV_ETH_RX_Q_NUM) + { + mvOsPrintf("ethDrv: RX queue #%d is out of range\n", queue); + return MV_BAD_PARAM; + } + + if(queue != -1) + { + macL = (pAddr[4] << 8) | (pAddr[5]); + macH = (pAddr[0] << 24)| (pAddr[1] << 16) | + (pAddr[2] << 8) | (pAddr[3] << 0); + + MV_REG_WRITE(ETH_MAC_ADDR_LOW_REG(pPortCtrl->portNo), macL); + MV_REG_WRITE(ETH_MAC_ADDR_HIGH_REG(pPortCtrl->portNo), macH); + } + + /* Accept frames of this address */ + ethSetUcastAddr(pPortCtrl->portNo, pAddr[5], queue); + + return MV_OK; +} + +/******************************************************************************* +* mvEthMacAddrGet - This function returns the port Unicast address. +* +* DESCRIPTION: +* This function returns the port Ethernet MAC address. +* +* INPUT: +* int portNo - Ethernet port number. +* char* pAddr - Pointer where address will be written to +* +* RETURN: MV_STATUS +* MV_OK - Success, Other - Faulure +* +*******************************************************************************/ +MV_STATUS mvEthMacAddrGet(int portNo, unsigned char *pAddr) +{ + unsigned int macH; + unsigned int macL; + + if(pAddr == NULL) + { + mvOsPrintf("mvEthMacAddrGet: NULL pointer.\n"); + return MV_BAD_PARAM; + } + + macH = MV_REG_READ(ETH_MAC_ADDR_HIGH_REG(portNo)); + macL = MV_REG_READ(ETH_MAC_ADDR_LOW_REG(portNo)); + pAddr[0] = (macH >> 24) & 0xff; + pAddr[1] = (macH >> 16) & 0xff; + pAddr[2] = (macH >> 8) & 0xff; + pAddr[3] = macH & 0xff; + pAddr[4] = (macL >> 8) & 0xff; + pAddr[5] = macL & 0xff; + + return MV_OK; +} + +/******************************************************************************* +* mvEthMcastCrc8Get - Calculate CRC8 of MAC address. +* +* DESCRIPTION: +* +* INPUT: +* MV_U8* pAddr - Address to calculate CRC-8 +* +* RETURN: MV_U8 - CRC-8 of this MAC address +* +*******************************************************************************/ +MV_U8 mvEthMcastCrc8Get(MV_U8* pAddr) +{ + unsigned int macH; + unsigned int macL; + int macArray[48]; + int crc[8]; + int i; + unsigned char crcResult = 0; + + /* Calculate CRC-8 out of the given address */ + macH = (pAddr[0] << 8) | (pAddr[1]); + macL = (pAddr[2] << 24)| (pAddr[3] << 16) | + (pAddr[4] << 8) | (pAddr[5] << 0); + + for(i=0; i<32; i++) + macArray[i] = (macL >> i) & 0x1; + + for(i=32; i<48; i++) + macArray[i] = (macH >> (i - 32)) & 0x1; + + crc[0] = macArray[45] ^ macArray[43] ^ macArray[40] ^ macArray[39] ^ + macArray[35] ^ macArray[34] ^ macArray[31] ^ macArray[30] ^ + macArray[28] ^ macArray[23] ^ macArray[21] ^ macArray[19] ^ + macArray[18] ^ macArray[16] ^ macArray[14] ^ macArray[12] ^ + macArray[8] ^ macArray[7] ^ macArray[6] ^ macArray[0]; + + crc[1] = macArray[46] ^ macArray[45] ^ macArray[44] ^ macArray[43] ^ + macArray[41] ^ macArray[39] ^ macArray[36] ^ macArray[34] ^ + macArray[32] ^ macArray[30] ^ macArray[29] ^ macArray[28] ^ + macArray[24] ^ macArray[23] ^ macArray[22] ^ macArray[21] ^ + macArray[20] ^ macArray[18] ^ macArray[17] ^ macArray[16] ^ + macArray[15] ^ macArray[14] ^ macArray[13] ^ macArray[12] ^ + macArray[9] ^ macArray[6] ^ macArray[1] ^ macArray[0]; + + crc[2] = macArray[47] ^ macArray[46] ^ macArray[44] ^ macArray[43] ^ + macArray[42] ^ macArray[39] ^ macArray[37] ^ macArray[34] ^ + macArray[33] ^ macArray[29] ^ macArray[28] ^ macArray[25] ^ + macArray[24] ^ macArray[22] ^ macArray[17] ^ macArray[15] ^ + macArray[13] ^ macArray[12] ^ macArray[10] ^ macArray[8] ^ + macArray[6] ^ macArray[2] ^ macArray[1] ^ macArray[0]; + + crc[3] = macArray[47] ^ macArray[45] ^ macArray[44] ^ macArray[43] ^ + macArray[40] ^ macArray[38] ^ macArray[35] ^ macArray[34] ^ + macArray[30] ^ macArray[29] ^ macArray[26] ^ macArray[25] ^ + macArray[23] ^ macArray[18] ^ macArray[16] ^ macArray[14] ^ + macArray[13] ^ macArray[11] ^ macArray[9] ^ macArray[7] ^ + macArray[3] ^ macArray[2] ^ macArray[1]; + + crc[4] = macArray[46] ^ macArray[45] ^ macArray[44] ^ macArray[41] ^ + macArray[39] ^ macArray[36] ^ macArray[35] ^ macArray[31] ^ + macArray[30] ^ macArray[27] ^ macArray[26] ^ macArray[24] ^ + macArray[19] ^ macArray[17] ^ macArray[15] ^ macArray[14] ^ + macArray[12] ^ macArray[10] ^ macArray[8] ^ macArray[4] ^ + macArray[3] ^ macArray[2]; + + crc[5] = macArray[47] ^ macArray[46] ^ macArray[45] ^ macArray[42] ^ + macArray[40] ^ macArray[37] ^ macArray[36] ^ macArray[32] ^ + macArray[31] ^ macArray[28] ^ macArray[27] ^ macArray[25] ^ + macArray[20] ^ macArray[18] ^ macArray[16] ^ macArray[15] ^ + macArray[13] ^ macArray[11] ^ macArray[9] ^ macArray[5] ^ + macArray[4] ^ macArray[3]; + + crc[6] = macArray[47] ^ macArray[46] ^ macArray[43] ^ macArray[41] ^ + macArray[38] ^ macArray[37] ^ macArray[33] ^ macArray[32] ^ + macArray[29] ^ macArray[28] ^ macArray[26] ^ macArray[21] ^ + macArray[19] ^ macArray[17] ^ macArray[16] ^ macArray[14] ^ + macArray[12] ^ macArray[10] ^ macArray[6] ^ macArray[5] ^ + macArray[4]; + + crc[7] = macArray[47] ^ macArray[44] ^ macArray[42] ^ macArray[39] ^ + macArray[38] ^ macArray[34] ^ macArray[33] ^ macArray[30] ^ + macArray[29] ^ macArray[27] ^ macArray[22] ^ macArray[20] ^ + macArray[18] ^ macArray[17] ^ macArray[15] ^ macArray[13] ^ + macArray[11] ^ macArray[7] ^ macArray[6] ^ macArray[5]; + + for(i=0; i<8; i++) + crcResult = crcResult | (crc[i] << i); + + return crcResult; +} +/******************************************************************************* +* mvEthMcastAddrSet - Multicast address settings. +* +* DESCRIPTION: +* This API controls the MV device MAC multicast support. +* The MV device supports multicast using two tables: +* 1) Special Multicast Table for MAC addresses of the form +* 0x01-00-5E-00-00-XX (where XX is between 0x00 and 0xFF). +* The MAC DA[7:0] bits are used as a pointer to the Special Multicast +* Table entries in the DA-Filter table. +* In this case, the function calls ethPortSmcAddr() routine to set the +* Special Multicast Table. +* 2) Other Multicast Table for multicast of another type. A CRC-8bit +* is used as an index to the Other Multicast Table entries in the +* DA-Filter table. +* In this case, the function calculates the CRC-8bit value and calls +* ethPortOmcAddr() routine to set the Other Multicast Table. +* +* INPUT: +* void* pEthPortHndl - Ethernet port handler. +* MV_U8* pAddr - Address to be set +* int queue - RX queue to capture all packets with this +* Multicast MAC address. +* -1 means delete this Multicast address. +* +* RETURN: MV_STATUS +* MV_TRUE - Success, Other - Failure +* +*******************************************************************************/ +MV_STATUS mvEthMcastAddrSet(void* pPortHndl, MV_U8 *pAddr, int queue) +{ + ETH_PORT_CTRL* pPortCtrl = (ETH_PORT_CTRL*)pPortHndl; + unsigned char crcResult = 0; + + if(queue >= MV_ETH_RX_Q_NUM) + { + mvOsPrintf("ethPort %d: RX queue #%d is out of range\n", + pPortCtrl->portNo, queue); + return MV_BAD_PARAM; + } + + if((pAddr[0] == 0x01) && + (pAddr[1] == 0x00) && + (pAddr[2] == 0x5E) && + (pAddr[3] == 0x00) && + (pAddr[4] == 0x00)) + { + ethSetSpecialMcastAddr(pPortCtrl->portNo, pAddr[5], queue); + } + else + { + crcResult = mvEthMcastCrc8Get(pAddr); + + /* Check Add counter for this CRC value */ + if(queue == -1) + { + if(pPortCtrl->mcastCount[crcResult] == 0) + { + mvOsPrintf("ethPort #%d: No valid Mcast for crc8=0x%02x\n", + pPortCtrl->portNo, (unsigned)crcResult); + return MV_NO_SUCH; + } + + pPortCtrl->mcastCount[crcResult]--; + if(pPortCtrl->mcastCount[crcResult] != 0) + { + mvOsPrintf("ethPort #%d: After delete there are %d valid Mcast for crc8=0x%02x\n", + pPortCtrl->portNo, pPortCtrl->mcastCount[crcResult], + (unsigned)crcResult); + return MV_NO_CHANGE; + } + } + else + { + pPortCtrl->mcastCount[crcResult]++; + if(pPortCtrl->mcastCount[crcResult] > 1) + { + mvOsPrintf("ethPort #%d: Valid Mcast for crc8=0x%02x already exists\n", + pPortCtrl->portNo, (unsigned)crcResult); + return MV_NO_CHANGE; + } + } + ethSetOtherMcastAddr(pPortCtrl->portNo, crcResult, queue); + } + return MV_OK; +} + +/******************************************************************************* +* ethSetUcastTable - Unicast address settings. +* +* DESCRIPTION: +* Set all entries in the Unicast MAC Table queue==-1 means reject all +* INPUT: +* +* RETURN: +* +*******************************************************************************/ +static void ethSetUcastTable(int portNo, int queue) +{ + int offset; + MV_U32 regValue; + + if(queue == -1) + { + regValue = 0; + } + else + { + regValue = (((0x01 | (queue<<1)) << 0) | + ((0x01 | (queue<<1)) << 8) | + ((0x01 | (queue<<1)) << 16) | + ((0x01 | (queue<<1)) << 24)); + } + + for (offset=0; offset<=0xC; offset+=4) + MV_REG_WRITE((ETH_DA_FILTER_UCAST_BASE(portNo) + offset), regValue); +} + +/******************************************************************************* +* mvEthSetSpecialMcastTable - Special Multicast address settings. +* +* DESCRIPTION: +* Set all entries to the Special Multicast MAC Table. queue==-1 means reject all +* INPUT: +* +* RETURN: +* +*******************************************************************************/ +MV_VOID mvEthSetSpecialMcastTable(int portNo, int queue) +{ + int offset; + MV_U32 regValue; + + if(queue == -1) + { + regValue = 0; + } + else + { + regValue = (((0x01 | (queue<<1)) << 0) | + ((0x01 | (queue<<1)) << 8) | + ((0x01 | (queue<<1)) << 16) | + ((0x01 | (queue<<1)) << 24)); + } + + for (offset=0; offset<=0xFC; offset+=4) + { + MV_REG_WRITE((ETH_DA_FILTER_SPEC_MCAST_BASE(portNo) + + offset), regValue); + } +} + +/******************************************************************************* +* mvEthSetOtherMcastTable - Other Multicast address settings. +* +* DESCRIPTION: +* Set all entries to the Other Multicast MAC Table. queue==-1 means reject all +* INPUT: +* +* RETURN: +* +*******************************************************************************/ +MV_VOID mvEthSetOtherMcastTable(int portNo, int queue) +{ + int offset; + MV_U32 regValue; + + if(queue == -1) + { + regValue = 0; + } + else + { + regValue = (((0x01 | (queue<<1)) << 0) | + ((0x01 | (queue<<1)) << 8) | + ((0x01 | (queue<<1)) << 16) | + ((0x01 | (queue<<1)) << 24)); + } + + for (offset=0; offset<=0xFC; offset+=4) + { + MV_REG_WRITE((ETH_DA_FILTER_OTH_MCAST_BASE(portNo) + + offset), regValue); + } +} + +/******************************************************************************* +* ethSetUcastAddr - This function Set the port unicast address table +* +* DESCRIPTION: +* This function locates the proper entry in the Unicast table for the +* specified MAC nibble and sets its properties according to function +* parameters. +* +* INPUT: +* int ethPortNum - Port number. +* MV_U8 lastNibble - Unicast MAC Address last nibble. +* int queue - Rx queue number for this MAC address. +* value "-1" means remove address +* +* OUTPUT: +* This function add/removes MAC addresses from the port unicast address +* table. +* +* RETURN: +* MV_TRUE is output succeeded. +* MV_FALSE if option parameter is invalid. +* +*******************************************************************************/ +static MV_BOOL ethSetUcastAddr(int portNo, MV_U8 lastNibble, int queue) +{ + unsigned int unicastReg; + unsigned int tblOffset; + unsigned int regOffset; + + /* Locate the Unicast table entry */ + lastNibble = (0xf & lastNibble); + tblOffset = (lastNibble / 4) * 4; /* Register offset from unicast table base*/ + regOffset = lastNibble % 4; /* Entry offset within the above register */ + + + unicastReg = MV_REG_READ( (ETH_DA_FILTER_UCAST_BASE(portNo) + + tblOffset)); + + + if(queue == -1) + { + /* Clear accepts frame bit at specified unicast DA table entry */ + unicastReg &= ~(0xFF << (8*regOffset)); + } + else + { + unicastReg &= ~(0xFF << (8*regOffset)); + unicastReg |= ((0x01 | (queue<<1)) << (8*regOffset)); + } + MV_REG_WRITE( (ETH_DA_FILTER_UCAST_BASE(portNo) + tblOffset), + unicastReg); + + return MV_TRUE; +} + +/******************************************************************************* +* ethSetSpecialMcastAddr - Special Multicast address settings. +* +* DESCRIPTION: +* This routine controls the MV device special MAC multicast support. +* The Special Multicast Table for MAC addresses supports MAC of the form +* 0x01-00-5E-00-00-XX (where XX is between 0x00 and 0xFF). +* The MAC DA[7:0] bits are used as a pointer to the Special Multicast +* Table entries in the DA-Filter table. +* This function set the Special Multicast Table appropriate entry +* according to the argument given. +* +* INPUT: +* int ethPortNum Port number. +* unsigned char mcByte Multicast addr last byte (MAC DA[7:0] bits). +* int queue Rx queue number for this MAC address. +* int option 0 = Add, 1 = remove address. +* +* OUTPUT: +* See description. +* +* RETURN: +* MV_TRUE is output succeeded. +* MV_FALSE if option parameter is invalid. +* +*******************************************************************************/ +static MV_BOOL ethSetSpecialMcastAddr(int ethPortNum, MV_U8 lastByte, int queue) +{ + unsigned int smcTableReg; + unsigned int tblOffset; + unsigned int regOffset; + + /* Locate the SMC table entry */ + tblOffset = (lastByte / 4); /* Register offset from SMC table base */ + regOffset = lastByte % 4; /* Entry offset within the above register */ + + smcTableReg = MV_REG_READ((ETH_DA_FILTER_SPEC_MCAST_BASE(ethPortNum) + tblOffset*4)); + + if(queue == -1) + { + /* Clear accepts frame bit at specified Special DA table entry */ + smcTableReg &= ~(0xFF << (8 * regOffset)); + } + else + { + smcTableReg &= ~(0xFF << (8 * regOffset)); + smcTableReg |= ((0x01 | (queue<<1)) << (8 * regOffset)); + } + MV_REG_WRITE((ETH_DA_FILTER_SPEC_MCAST_BASE(ethPortNum) + + tblOffset*4), smcTableReg); + + return MV_TRUE; +} + +/******************************************************************************* +* ethSetOtherMcastAddr - Multicast address settings. +* +* DESCRIPTION: +* This routine controls the MV device Other MAC multicast support. +* The Other Multicast Table is used for multicast of another type. +* A CRC-8bit is used as an index to the Other Multicast Table entries +* in the DA-Filter table. +* The function gets the CRC-8bit value from the calling routine and +* set the Other Multicast Table appropriate entry according to the +* CRC-8 argument given. +* +* INPUT: +* int ethPortNum Port number. +* MV_U8 crc8 A CRC-8bit (Polynomial: x^8+x^2+x^1+1). +* int queue Rx queue number for this MAC address. +* +* OUTPUT: +* See description. +* +* RETURN: +* MV_TRUE is output succeeded. +* MV_FALSE if option parameter is invalid. +* +*******************************************************************************/ +static MV_BOOL ethSetOtherMcastAddr(int ethPortNum, MV_U8 crc8, int queue) +{ + unsigned int omcTableReg; + unsigned int tblOffset; + unsigned int regOffset; + + /* Locate the OMC table entry */ + tblOffset = (crc8 / 4) * 4; /* Register offset from OMC table base */ + regOffset = crc8 % 4; /* Entry offset within the above register */ + + omcTableReg = MV_REG_READ( + (ETH_DA_FILTER_OTH_MCAST_BASE(ethPortNum) + tblOffset)); + + if(queue == -1) + { + /* Clear accepts frame bit at specified Other DA table entry */ + omcTableReg &= ~(0xFF << (8 * regOffset)); + } + else + { + omcTableReg &= ~(0xFF << (8 * regOffset)); + omcTableReg |= ((0x01 | (queue<<1)) << (8 * regOffset)); + } + + MV_REG_WRITE((ETH_DA_FILTER_OTH_MCAST_BASE(ethPortNum) + tblOffset), + omcTableReg); + + return MV_TRUE; +} + + +/******************************************************************************/ +/* MIB Counters functions */ +/******************************************************************************/ + + +/******************************************************************************* +* mvEthMibCounterRead - Read a MIB counter +* +* DESCRIPTION: +* This function reads a MIB counter of a specific ethernet port. +* NOTE - Read from ETH_MIB_GOOD_OCTETS_RECEIVED_LOW or +* ETH_MIB_GOOD_OCTETS_SENT_LOW counters will return 64 bits value, +* so pHigh32 pointer should not be NULL in this case. +* +* INPUT: +* int ethPortNum - Ethernet Port number. +* unsigned int mibOffset - MIB counter offset. +* +* OUTPUT: +* MV_U32* pHigh32 - pointer to place where 32 most significant bits +* of the counter will be stored. +* +* RETURN: +* 32 low sgnificant bits of MIB counter value. +* +*******************************************************************************/ +MV_U32 mvEthMibCounterRead(void* pPortHandle, unsigned int mibOffset, + MV_U32* pHigh32) +{ + int portNo; + MV_U32 valLow32, valHigh32; + ETH_PORT_CTRL* pPortCtrl = (ETH_PORT_CTRL*)pPortHandle; + + portNo = pPortCtrl->portNo; + + valLow32 = MV_REG_READ(ETH_MIB_COUNTERS_BASE(portNo) + mibOffset); + + /* Implement FEr ETH. Erroneous Value when Reading the Upper 32-bits */ + /* of a 64-bit MIB Counter. */ + if( (mibOffset == ETH_MIB_GOOD_OCTETS_RECEIVED_LOW) || + (mibOffset == ETH_MIB_GOOD_OCTETS_SENT_LOW) ) + { + valHigh32 = MV_REG_READ(ETH_MIB_COUNTERS_BASE(portNo) + mibOffset + 4); + if(pHigh32 != NULL) + *pHigh32 = valHigh32; + } + return valLow32; +} + +/******************************************************************************* +* mvEthMibCountersClear - Clear all MIB counters +* +* DESCRIPTION: +* This function clears all MIB counters +* +* INPUT: +* int ethPortNum - Ethernet Port number. +* +* +* RETURN: void +* +*******************************************************************************/ +void mvEthMibCountersClear(void* pPortHandle) +{ + int i, portNo; + unsigned int dummy; + ETH_PORT_CTRL* pPortCtrl = (ETH_PORT_CTRL*)pPortHandle; + + portNo = pPortCtrl->portNo; + + /* Perform dummy reads from MIB counters */ + for(i=ETH_MIB_GOOD_OCTETS_RECEIVED_LOW; i 0xFF) + { + mvOsPrintf("eth_%d: tos=0x%x is out of range\n", pPortCtrl->portNo, tos); + return -1; + } + regIdx = mvOsDivide(tos>>2, 10); + regOffs = mvOsReminder(tos>>2, 10); + + regValue = MV_REG_READ(ETH_DIFF_SERV_PRIO_REG(pPortCtrl->portNo, regIdx) ); + rxq = (regValue >> (regOffs*3)); + rxq &= 0x7; + + return rxq; +} + +/******************************************************************************* +* mvEthTosToRxqSet - Map packets with special TOS value to special RX queue +* +* DESCRIPTION: +* +* INPUT: +* void* pPortHandle - Pointer to port specific handler; +* int tos - TOS value in the IP header of the packet +* int rxq - RX Queue for packets with the configured TOS value +* Negative value (-1) means no special processing for these packets, +* so they will be processed as regular packets. +* +* RETURN: MV_STATUS +*******************************************************************************/ +MV_STATUS mvEthTosToRxqSet(void* pPortHandle, int tos, int rxq) +{ + MV_U32 regValue; + int regIdx, regOffs; + ETH_PORT_CTRL* pPortCtrl = (ETH_PORT_CTRL*)pPortHandle; + + if( (rxq < 0) || (rxq >= MV_ETH_RX_Q_NUM) ) + { + mvOsPrintf("eth_%d: RX queue #%d is out of range\n", pPortCtrl->portNo, rxq); + return MV_BAD_PARAM; + } + if(tos > 0xFF) + { + mvOsPrintf("eth_%d: tos=0x%x is out of range\n", pPortCtrl->portNo, tos); + return MV_BAD_PARAM; + } + regIdx = mvOsDivide(tos>>2, 10); + regOffs = mvOsReminder(tos>>2, 10); + + regValue = MV_REG_READ(ETH_DIFF_SERV_PRIO_REG(pPortCtrl->portNo, regIdx) ); + regValue &= ~(0x7 << (regOffs*3)); + regValue |= (rxq << (regOffs*3)); + + MV_REG_WRITE(ETH_DIFF_SERV_PRIO_REG(pPortCtrl->portNo, regIdx), regValue); + return MV_OK; +} + +/******************************************************************************* +* mvEthVlanPrioRxQueue - Configure RX queue to capture VLAN tagged packets with +* special priority bits [0-2] +* +* DESCRIPTION: +* +* INPUT: +* void* pPortHandle - Pointer to port specific handler; +* int bpduQueue - Special queue to capture VLAN tagged packets with special +* priority. +* Negative value (-1) means no special processing for these packets, +* so they will be processed as regular packets. +* +* RETURN: MV_STATUS +* MV_OK - Success +* MV_FAIL - Failed. +* +*******************************************************************************/ +MV_STATUS mvEthVlanPrioRxQueue(void* pPortHandle, int vlanPrio, int vlanPrioQueue) +{ + ETH_PORT_CTRL* pPortCtrl = (ETH_PORT_CTRL*)pPortHandle; + MV_U32 vlanPrioReg; + + if(vlanPrioQueue >= MV_ETH_RX_Q_NUM) + { + mvOsPrintf("ethDrv: RX queue #%d is out of range\n", vlanPrioQueue); + return MV_BAD_PARAM; + } + if(vlanPrio >= 8) + { + mvOsPrintf("ethDrv: vlanPrio=%d is out of range\n", vlanPrio); + return MV_BAD_PARAM; + } + + vlanPrioReg = MV_REG_READ(ETH_VLAN_TAG_TO_PRIO_REG(pPortCtrl->portNo)); + vlanPrioReg &= ~(0x7 << (vlanPrio*3)); + vlanPrioReg |= (vlanPrioQueue << (vlanPrio*3)); + MV_REG_WRITE(ETH_VLAN_TAG_TO_PRIO_REG(pPortCtrl->portNo), vlanPrioReg); + + return MV_OK; +} + + +/******************************************************************************* +* mvEthBpduRxQueue - Configure RX queue to capture BPDU packets. +* +* DESCRIPTION: +* This function defines processing of BPDU packets. +* BPDU packets can be accepted and captured to one of RX queues +* or can be processing as regular Multicast packets. +* +* INPUT: +* void* pPortHandle - Pointer to port specific handler; +* int bpduQueue - Special queue to capture BPDU packets (DA is equal to +* 01-80-C2-00-00-00 through 01-80-C2-00-00-FF, +* except for the Flow-Control Pause packets). +* Negative value (-1) means no special processing for BPDU, +* packets so they will be processed as regular Multicast packets. +* +* RETURN: MV_STATUS +* MV_OK - Success +* MV_FAIL - Failed. +* +*******************************************************************************/ +MV_STATUS mvEthBpduRxQueue(void* pPortHandle, int bpduQueue) +{ + ETH_PORT_CTRL* pPortCtrl = (ETH_PORT_CTRL*)pPortHandle; + MV_U32 portCfgReg; + MV_U32 portCfgExtReg; + + if(bpduQueue >= MV_ETH_RX_Q_NUM) + { + mvOsPrintf("ethDrv: RX queue #%d is out of range\n", bpduQueue); + return MV_BAD_PARAM; + } + + portCfgExtReg = MV_REG_READ(ETH_PORT_CONFIG_EXTEND_REG(pPortCtrl->portNo)); + + portCfgReg = MV_REG_READ(ETH_PORT_CONFIG_REG(pPortCtrl->portNo)); + if(bpduQueue >= 0) + { + pPortCtrl->portConfig.rxBpduQ = bpduQueue; + + portCfgReg &= ~ETH_DEF_RX_BPDU_QUEUE_ALL_MASK; + portCfgReg |= ETH_DEF_RX_BPDU_QUEUE_MASK(pPortCtrl->portConfig.rxBpduQ); + + MV_REG_WRITE(ETH_PORT_CONFIG_REG(pPortCtrl->portNo), portCfgReg); + + portCfgExtReg |= ETH_CAPTURE_SPAN_BPDU_ENABLE_MASK; + } + else + { + pPortCtrl->portConfig.rxBpduQ = -1; + /* no special processing for BPDU packets */ + portCfgExtReg &= (~ETH_CAPTURE_SPAN_BPDU_ENABLE_MASK); + } + + MV_REG_WRITE(ETH_PORT_CONFIG_EXTEND_REG(pPortCtrl->portNo), portCfgExtReg); + + return MV_OK; +} + + +/******************************************************************************* +* mvEthArpRxQueue - Configure RX queue to capture ARP packets. +* +* DESCRIPTION: +* This function defines processing of ARP (type=0x0806) packets. +* ARP packets can be accepted and captured to one of RX queues +* or can be processed as other Broadcast packets. +* +* INPUT: +* void* pPortHandle - Pointer to port specific handler; +* int arpQueue - Special queue to capture ARP packets (type=0x806). +* Negative value (-1) means discard ARP packets +* +* RETURN: MV_STATUS +* MV_OK - Success +* MV_FAIL - Failed. +* +*******************************************************************************/ +MV_STATUS mvEthArpRxQueue(void* pPortHandle, int arpQueue) +{ + ETH_PORT_CTRL* pPortCtrl = (ETH_PORT_CTRL*)pPortHandle; + MV_U32 portCfgReg; + + if(arpQueue >= MV_ETH_RX_Q_NUM) + { + mvOsPrintf("ethDrv: RX queue #%d is out of range\n", arpQueue); + return MV_BAD_PARAM; + } + + portCfgReg = MV_REG_READ(ETH_PORT_CONFIG_REG(pPortCtrl->portNo)); + + if(arpQueue >= 0) + { + pPortCtrl->portConfig.rxArpQ = arpQueue; + portCfgReg &= ~ETH_DEF_RX_ARP_QUEUE_ALL_MASK; + portCfgReg |= ETH_DEF_RX_ARP_QUEUE_MASK(pPortCtrl->portConfig.rxArpQ); + + portCfgReg &= (~ETH_REJECT_ARP_BCAST_MASK); + } + else + { + pPortCtrl->portConfig.rxArpQ = -1; + portCfgReg |= ETH_REJECT_ARP_BCAST_MASK; + } + + MV_REG_WRITE(ETH_PORT_CONFIG_REG(pPortCtrl->portNo), portCfgReg); + + return MV_OK; +} + + +/******************************************************************************* +* mvEthTcpRxQueue - Configure RX queue to capture TCP packets. +* +* DESCRIPTION: +* This function defines processing of TCP packets. +* TCP packets can be accepted and captured to one of RX queues +* or can be processed as regular Unicast packets. +* +* INPUT: +* void* pPortHandle - Pointer to port specific handler; +* int tcpQueue - Special queue to capture TCP packets. Value "-1" +* means no special processing for TCP packets, +* so they will be processed as regular +* +* RETURN: MV_STATUS +* MV_OK - Success +* MV_FAIL - Failed. +* +*******************************************************************************/ +MV_STATUS mvEthTcpRxQueue(void* pPortHandle, int tcpQueue) +{ + ETH_PORT_CTRL* pPortCtrl = (ETH_PORT_CTRL*)pPortHandle; + MV_U32 portCfgReg; + + if(tcpQueue >= MV_ETH_RX_Q_NUM) + { + mvOsPrintf("ethDrv: RX queue #%d is out of range\n", tcpQueue); + return MV_BAD_PARAM; + } + portCfgReg = MV_REG_READ(ETH_PORT_CONFIG_REG(pPortCtrl->portNo)); + + if(tcpQueue >= 0) + { + pPortCtrl->portConfig.rxTcpQ = tcpQueue; + portCfgReg &= ~ETH_DEF_RX_TCP_QUEUE_ALL_MASK; + portCfgReg |= ETH_DEF_RX_TCP_QUEUE_MASK(pPortCtrl->portConfig.rxTcpQ); + + portCfgReg |= ETH_CAPTURE_TCP_FRAMES_ENABLE_MASK; + } + else + { + pPortCtrl->portConfig.rxTcpQ = -1; + portCfgReg &= (~ETH_CAPTURE_TCP_FRAMES_ENABLE_MASK); + } + + MV_REG_WRITE(ETH_PORT_CONFIG_REG(pPortCtrl->portNo), portCfgReg); + + return MV_OK; +} + + +/******************************************************************************* +* mvEthUdpRxQueue - Configure RX queue to capture UDP packets. +* +* DESCRIPTION: +* This function defines processing of UDP packets. +* TCP packets can be accepted and captured to one of RX queues +* or can be processed as regular Unicast packets. +* +* INPUT: +* void* pPortHandle - Pointer to port specific handler; +* int udpQueue - Special queue to capture UDP packets. Value "-1" +* means no special processing for UDP packets, +* so they will be processed as regular +* +* RETURN: MV_STATUS +* MV_OK - Success +* MV_FAIL - Failed. +* +*******************************************************************************/ +MV_STATUS mvEthUdpRxQueue(void* pPortHandle, int udpQueue) +{ + ETH_PORT_CTRL* pPortCtrl = (ETH_PORT_CTRL*)pPortHandle; + MV_U32 portCfgReg; + + if(udpQueue >= MV_ETH_RX_Q_NUM) + { + mvOsPrintf("ethDrv: RX queue #%d is out of range\n", udpQueue); + return MV_BAD_PARAM; + } + + portCfgReg = MV_REG_READ(ETH_PORT_CONFIG_REG(pPortCtrl->portNo)); + + if(udpQueue >= 0) + { + pPortCtrl->portConfig.rxUdpQ = udpQueue; + portCfgReg &= ~ETH_DEF_RX_UDP_QUEUE_ALL_MASK; + portCfgReg |= ETH_DEF_RX_UDP_QUEUE_MASK(pPortCtrl->portConfig.rxUdpQ); + + portCfgReg |= ETH_CAPTURE_UDP_FRAMES_ENABLE_MASK; + } + else + { + pPortCtrl->portConfig.rxUdpQ = -1; + portCfgReg &= ~ETH_CAPTURE_UDP_FRAMES_ENABLE_MASK; + } + + MV_REG_WRITE(ETH_PORT_CONFIG_REG(pPortCtrl->portNo), portCfgReg); + + return MV_OK; +} + + +/******************************************************************************/ +/* Speed, Duplex, FlowControl routines */ +/******************************************************************************/ + +/******************************************************************************* +* mvEthSpeedDuplexSet - Set Speed and Duplex of the port. +* +* DESCRIPTION: +* This function configure the port to work with desirable Duplex and Speed. +* Changing of these parameters are allowed only when port is disabled. +* This function disable the port if was enabled, change duplex and speed +* and, enable the port back if needed. +* +* INPUT: +* void* pPortHandle - Pointer to port specific handler; +* ETH_PORT_SPEED speed - Speed of the port. +* ETH_PORT_SPEED duplex - Duplex of the port. +* +* RETURN: MV_STATUS +* MV_OK - Success +* MV_OUT_OF_RANGE - Failed. Port is out of valid range +* MV_NOT_FOUND - Failed. Port is not initialized. +* MV_BAD_PARAM - Input parameters (speed/duplex) in conflict. +* MV_BAD_VALUE - Value of one of input parameters (speed, duplex) +* is not valid +* +*******************************************************************************/ +MV_STATUS mvEthSpeedDuplexSet(void* pPortHandle, MV_ETH_PORT_SPEED speed, + MV_ETH_PORT_DUPLEX duplex) +{ + ETH_PORT_CTRL* pPortCtrl = (ETH_PORT_CTRL*)pPortHandle; + int port = pPortCtrl->portNo; + MV_U32 portSerialCtrlReg; + + if( (port < 0) || (port >= (int)mvCtrlEthMaxPortGet()) ) + return MV_OUT_OF_RANGE; + + pPortCtrl = ethPortCtrl[port]; + if(pPortCtrl == NULL) + return MV_NOT_FOUND; + + /* Check validity */ + if( (speed == MV_ETH_SPEED_1000) && (duplex == MV_ETH_DUPLEX_HALF) ) + return MV_BAD_PARAM; + + portSerialCtrlReg = MV_REG_READ(ETH_PORT_SERIAL_CTRL_REG(port)); + /* Set Speed */ + switch(speed) + { + case MV_ETH_SPEED_AN: + portSerialCtrlReg &= ~ETH_DISABLE_SPEED_AUTO_NEG_MASK; + break; + + case MV_ETH_SPEED_10: + portSerialCtrlReg |= ETH_DISABLE_SPEED_AUTO_NEG_MASK; + portSerialCtrlReg &= ~ETH_SET_GMII_SPEED_1000_MASK; + portSerialCtrlReg &= ~ETH_SET_MII_SPEED_100_MASK; + break; + + case MV_ETH_SPEED_100: + portSerialCtrlReg |= ETH_DISABLE_SPEED_AUTO_NEG_MASK; + portSerialCtrlReg &= ~ETH_SET_GMII_SPEED_1000_MASK; + portSerialCtrlReg |= ETH_SET_MII_SPEED_100_MASK; + break; + + case MV_ETH_SPEED_1000: + portSerialCtrlReg |= ETH_DISABLE_SPEED_AUTO_NEG_MASK; + portSerialCtrlReg |= ETH_SET_GMII_SPEED_1000_MASK; + break; + + default: + mvOsPrintf("ethDrv: Unexpected Speed value %d\n", speed); + return MV_BAD_VALUE; + } + /* Set duplex */ + switch(duplex) + { + case MV_ETH_DUPLEX_AN: + portSerialCtrlReg &= ~ETH_DISABLE_DUPLEX_AUTO_NEG_MASK; + break; + + case MV_ETH_DUPLEX_HALF: + portSerialCtrlReg |= ETH_DISABLE_DUPLEX_AUTO_NEG_MASK; + portSerialCtrlReg &= ~ETH_SET_FULL_DUPLEX_MASK; + break; + + case MV_ETH_DUPLEX_FULL: + portSerialCtrlReg |= ETH_DISABLE_DUPLEX_AUTO_NEG_MASK; + portSerialCtrlReg |= ETH_SET_FULL_DUPLEX_MASK; + break; + + default: + mvOsPrintf("ethDrv: Unexpected Duplex value %d\n", duplex); + return MV_BAD_VALUE; + } + MV_REG_WRITE(ETH_PORT_SERIAL_CTRL_REG(port), portSerialCtrlReg); + + return MV_OK; +} + +/******************************************************************************* +* mvEthFlowCtrlSet - Set Flow Control of the port. +* +* DESCRIPTION: +* This function configure the port to work with desirable Duplex and +* Speed. Changing of these parameters are allowed only when port is +* disabled. This function disable the port if was enabled, change +* duplex and speed and, enable the port back if needed. +* +* INPUT: +* void* pPortHandle - Pointer to port specific handler; +* MV_ETH_PORT_FC flowControl - Flow control of the port. +* +* RETURN: MV_STATUS +* MV_OK - Success +* MV_OUT_OF_RANGE - Failed. Port is out of valid range +* MV_NOT_FOUND - Failed. Port is not initialized. +* MV_BAD_VALUE - Value flowControl parameters is not valid +* +*******************************************************************************/ +MV_STATUS mvEthFlowCtrlSet(void* pPortHandle, MV_ETH_PORT_FC flowControl) +{ + ETH_PORT_CTRL* pPortCtrl = (ETH_PORT_CTRL*)pPortHandle; + int port = pPortCtrl->portNo; + MV_U32 portSerialCtrlReg; + + if( (port < 0) || (port >= (int)mvCtrlEthMaxPortGet() ) ) + return MV_OUT_OF_RANGE; + + pPortCtrl = ethPortCtrl[port]; + if(pPortCtrl == NULL) + return MV_NOT_FOUND; + + portSerialCtrlReg = MV_REG_READ(ETH_PORT_SERIAL_CTRL_REG(port)); + switch(flowControl) + { + case MV_ETH_FC_AN_ADV_DIS: + portSerialCtrlReg &= ~ETH_DISABLE_FC_AUTO_NEG_MASK; + portSerialCtrlReg &= ~ETH_ADVERTISE_SYM_FC_MASK; + break; + + case MV_ETH_FC_AN_ADV_SYM: + portSerialCtrlReg &= ~ETH_DISABLE_FC_AUTO_NEG_MASK; + portSerialCtrlReg |= ETH_ADVERTISE_SYM_FC_MASK; + break; + + case MV_ETH_FC_DISABLE: + portSerialCtrlReg |= ETH_DISABLE_FC_AUTO_NEG_MASK; + portSerialCtrlReg &= ~ETH_SET_FLOW_CTRL_MASK; + break; + + case MV_ETH_FC_ENABLE: + portSerialCtrlReg |= ETH_DISABLE_FC_AUTO_NEG_MASK; + portSerialCtrlReg |= ETH_SET_FLOW_CTRL_MASK; + break; + + default: + mvOsPrintf("ethDrv: Unexpected FlowControl value %d\n", flowControl); + return MV_BAD_VALUE; + } + MV_REG_WRITE(ETH_PORT_SERIAL_CTRL_REG(port), portSerialCtrlReg); + + return MV_OK; +} + +/******************************************************************************* +* mvEthHeaderModeSet - Set port header mode. +* +* DESCRIPTION: +* This function configures the port to work in Marvell-Header mode. +* +* INPUT: +* void* pPortHandle - Pointer to port specific handler; +* MV_ETH_HEADER_MODE headerMode - The header mode to set the port in. +* +* RETURN: MV_STATUS +* MV_OK - Success +* MV_NOT_SUPPORTED- Feature not supported. +* MV_OUT_OF_RANGE - Failed. Port is out of valid range +* MV_NOT_FOUND - Failed. Port is not initialized. +* MV_BAD_VALUE - Value of headerMode or numRxQueue parameter is not valid. +* +*******************************************************************************/ +MV_STATUS mvEthHeaderModeSet(void* pPortHandle, MV_ETH_HEADER_MODE headerMode) +{ + ETH_PORT_CTRL* pPortCtrl = (ETH_PORT_CTRL*)pPortHandle; + int port = pPortCtrl->portNo; + MV_U32 mvHeaderReg; + MV_U32 numRxQ = MV_ETH_RX_Q_NUM; + + if((port < 0) || (port >= mvCtrlEthMaxPortGet())) + return MV_OUT_OF_RANGE; + + pPortCtrl = ethPortCtrl[port]; + if(pPortCtrl == NULL) + return MV_NOT_FOUND; + + mvHeaderReg = MV_REG_READ(ETH_PORT_MARVELL_HEADER_REG(port)); + /* Disable header mode. */ + mvHeaderReg &= ~ETH_MVHDR_EN_MASK; + + if(headerMode != MV_ETH_DISABLE_HEADER_MODE) + { + /* Enable Header mode. */ + mvHeaderReg |= ETH_MVHDR_EN_MASK; + + /* Clear DA-Prefix & MHMask fields.*/ + mvHeaderReg &= ~(ETH_MVHDR_DAPREFIX_MASK | ETH_MVHDR_MHMASK_MASK); + + if(numRxQ > 1) + { + switch (headerMode) + { + case(MV_ETH_ENABLE_HEADER_MODE_PRI_2_1): + mvHeaderReg |= ETH_MVHDR_DAPREFIX_PRI_1_2; + break; + case(MV_ETH_ENABLE_HEADER_MODE_PRI_DBNUM): + mvHeaderReg |= ETH_MVHDR_DAPREFIX_DBNUM_PRI; + break; + case(MV_ETH_ENABLE_HEADER_MODE_PRI_SPID): + mvHeaderReg |= ETH_MVHDR_DAPREFIX_SPID_PRI; + break; + default: + break; + } + + switch (numRxQ) + { + case (4): + mvHeaderReg |= ETH_MVHDR_MHMASK_4_QUEUE; + break; + case (8): + mvHeaderReg |= ETH_MVHDR_MHMASK_8_QUEUE; + break; + default: + break; + } + } + } + + MV_REG_WRITE(ETH_PORT_MARVELL_HEADER_REG(port), mvHeaderReg); + + return MV_OK; +} + +#if (MV_ETH_VERSION >= 4) +/******************************************************************************* +* mvEthEjpModeSet - Enable / Disable EJP policy for TX. +* +* DESCRIPTION: +* This function +* +* INPUT: +* void* pPortHandle - Pointer to port specific handler; +* MV_BOOL TRUE - enable EJP mode +* FALSE - disable EJP mode +* +* OUTPUT: MV_STATUS +* MV_OK - Success +* Other - Failure +* +* RETURN: None. +* +*******************************************************************************/ +MV_STATUS mvEthEjpModeSet(void* pPortHandle, int mode) +{ + ETH_PORT_CTRL* pPortCtrl = (ETH_PORT_CTRL*)pPortHandle; + int port = pPortCtrl->portNo; + + if((port < 0) || (port >= mvCtrlEthMaxPortGet())) + return MV_OUT_OF_RANGE; + + pPortCtrl = ethPortCtrl[port]; + if(pPortCtrl == NULL) + return MV_NOT_FOUND; + + pPortCtrl->portConfig.ejpMode = mode; + if(mode) + { + /* EJP enabled */ + MV_REG_WRITE(ETH_TXQ_CMD_1_REG(port), ETH_TX_EJP_ENABLE_MASK); + } + else + { + /* EJP disabled */ + MV_REG_WRITE(ETH_TXQ_CMD_1_REG(port), 0); + } + mvOsPrintf("eth_%d: EJP %s - ETH_TXQ_CMD_1_REG: 0x%x = 0x%08x\n", + port, mode ? "Enabled" : "Disabled", ETH_TXQ_CMD_1_REG(port), + MV_REG_READ(ETH_TXQ_CMD_1_REG(port))); + + return MV_OK; +} +#endif /* MV_ETH_VERSION >= 4 */ + +/******************************************************************************* +* mvEthStatusGet - Get major properties of the port . +* +* DESCRIPTION: +* This function get major properties of the port (link, speed, duplex, +* flowControl, etc) and return them using the single structure. +* +* INPUT: +* void* pPortHandle - Pointer to port specific handler; +* +* OUTPUT: +* MV_ETH_PORT_STATUS* pStatus - Pointer to structure, were port status +* will be placed. +* +* RETURN: None. +* +*******************************************************************************/ +void mvEthStatusGet(void* pPortHandle, MV_ETH_PORT_STATUS* pStatus) +{ + ETH_PORT_CTRL* pPortCtrl = (ETH_PORT_CTRL*)pPortHandle; + int port = pPortCtrl->portNo; + + MV_U32 regValue; + + regValue = MV_REG_READ( ETH_PORT_STATUS_REG(port) ); + + if(regValue & ETH_GMII_SPEED_1000_MASK) + pStatus->speed = MV_ETH_SPEED_1000; + else if(regValue & ETH_MII_SPEED_100_MASK) + pStatus->speed = MV_ETH_SPEED_100; + else + pStatus->speed = MV_ETH_SPEED_10; + + if(regValue & ETH_LINK_UP_MASK) + pStatus->isLinkUp = MV_TRUE; + else + pStatus->isLinkUp = MV_FALSE; + + if(regValue & ETH_FULL_DUPLEX_MASK) + pStatus->duplex = MV_ETH_DUPLEX_FULL; + else + pStatus->duplex = MV_ETH_DUPLEX_HALF; + + + if(regValue & ETH_ENABLE_RCV_FLOW_CTRL_MASK) + pStatus->flowControl = MV_ETH_FC_ENABLE; + else + pStatus->flowControl = MV_ETH_FC_DISABLE; +} + + +/******************************************************************************/ +/* PHY Control Functions */ +/******************************************************************************/ + + +/******************************************************************************* +* mvEthPhyAddrSet - Set the ethernet port PHY address. +* +* DESCRIPTION: +* This routine set the ethernet port PHY address according to given +* parameter. +* +* INPUT: +* void* pPortHandle - Pointer to port specific handler; +* int phyAddr - PHY address +* +* RETURN: +* None. +* +*******************************************************************************/ +void mvEthPhyAddrSet(void* pPortHandle, int phyAddr) +{ + ETH_PORT_CTRL* pPortCtrl = (ETH_PORT_CTRL*)pPortHandle; + int port = pPortCtrl->portNo; + unsigned int regData; + + regData = MV_REG_READ(ETH_PHY_ADDR_REG(port)); + + regData &= ~ETH_PHY_ADDR_MASK; + regData |= phyAddr; + + MV_REG_WRITE(ETH_PHY_ADDR_REG(port), regData); + + return; +} + +/******************************************************************************* +* mvEthPhyAddrGet - Get the ethernet port PHY address. +* +* DESCRIPTION: +* This routine returns the given ethernet port PHY address. +* +* INPUT: +* void* pPortHandle - Pointer to port specific handler; +* +* +* RETURN: int - PHY address. +* +*******************************************************************************/ +int mvEthPhyAddrGet(void* pPortHandle) +{ + ETH_PORT_CTRL* pPortCtrl = (ETH_PORT_CTRL*)pPortHandle; + int port = pPortCtrl->portNo; + unsigned int regData; + + regData = MV_REG_READ(ETH_PHY_ADDR_REG(port)); + + return ((regData >> (5 * port)) & 0x1f); +} + +/******************************************************************************/ +/* Descriptor handling Functions */ +/******************************************************************************/ + +/******************************************************************************* +* etherInitRxDescRing - Curve a Rx chain desc list and buffer in memory. +* +* DESCRIPTION: +* This function prepares a Rx chained list of descriptors and packet +* buffers in a form of a ring. The routine must be called after port +* initialization routine and before port start routine. +* The Ethernet SDMA engine uses CPU bus addresses to access the various +* devices in the system (i.e. DRAM). This function uses the ethernet +* struct 'virtual to physical' routine (set by the user) to set the ring +* with physical addresses. +* +* INPUT: +* ETH_QUEUE_CTRL *pEthPortCtrl Ethernet Port Control srtuct. +* int rxQueue Number of Rx queue. +* int rxDescNum Number of Rx descriptors +* MV_U8* rxDescBaseAddr Rx descriptors memory area base addr. +* +* OUTPUT: +* The routine updates the Ethernet port control struct with information +* regarding the Rx descriptors and buffers. +* +* RETURN: None +* +*******************************************************************************/ +static void ethInitRxDescRing(ETH_PORT_CTRL* pPortCtrl, int queue) +{ + ETH_RX_DESC *pRxDescBase, *pRxDesc, *pRxPrevDesc; + int ix, rxDescNum = pPortCtrl->rxQueueConfig[queue].descrNum; + ETH_QUEUE_CTRL *pQueueCtrl = &pPortCtrl->rxQueue[queue]; + + /* Make sure descriptor address is cache line size aligned */ + pRxDescBase = (ETH_RX_DESC*)MV_ALIGN_UP((MV_ULONG)pQueueCtrl->descBuf.bufVirtPtr, + CPU_D_CACHE_LINE_SIZE); + + pRxDesc = (ETH_RX_DESC*)pRxDescBase; + pRxPrevDesc = pRxDesc; + + /* initialize the Rx descriptors ring */ + for (ix=0; ixbufSize = 0x0; + pRxDesc->byteCnt = 0x0; + pRxDesc->cmdSts = ETH_BUFFER_OWNED_BY_HOST; + pRxDesc->bufPtr = 0x0; + pRxDesc->returnInfo = 0x0; + pRxPrevDesc = pRxDesc; + if(ix == (rxDescNum-1)) + { + /* Closing Rx descriptors ring */ + pRxPrevDesc->nextDescPtr = (MV_U32)ethDescVirtToPhy(pQueueCtrl, (void*)pRxDescBase); + } + else + { + pRxDesc = (ETH_RX_DESC*)((MV_ULONG)pRxDesc + ETH_RX_DESC_ALIGNED_SIZE); + pRxPrevDesc->nextDescPtr = (MV_U32)ethDescVirtToPhy(pQueueCtrl, (void*)pRxDesc); + } + ETH_DESCR_FLUSH_INV(pPortCtrl, pRxPrevDesc); + } + + pQueueCtrl->pCurrentDescr = pRxDescBase; + pQueueCtrl->pUsedDescr = pRxDescBase; + + pQueueCtrl->pFirstDescr = pRxDescBase; + pQueueCtrl->pLastDescr = pRxDesc; + pQueueCtrl->resource = 0; +} + +void ethResetRxDescRing(void* pPortHndl, int queue) +{ + ETH_PORT_CTRL* pPortCtrl = (ETH_PORT_CTRL*)pPortHndl; + ETH_QUEUE_CTRL* pQueueCtrl = &pPortCtrl->rxQueue[queue]; + ETH_RX_DESC* pRxDesc = (ETH_RX_DESC*)pQueueCtrl->pFirstDescr; + + pQueueCtrl->resource = 0; + if(pQueueCtrl->pFirstDescr != NULL) + { + while(MV_TRUE) + { + pRxDesc->bufSize = 0x0; + pRxDesc->byteCnt = 0x0; + pRxDesc->cmdSts = ETH_BUFFER_OWNED_BY_HOST; + pRxDesc->bufPtr = 0x0; + pRxDesc->returnInfo = 0x0; + ETH_DESCR_FLUSH_INV(pPortCtrl, pRxDesc); + if( (void*)pRxDesc == pQueueCtrl->pLastDescr) + break; + pRxDesc = RX_NEXT_DESC_PTR(pRxDesc, pQueueCtrl); + } + pQueueCtrl->pCurrentDescr = pQueueCtrl->pFirstDescr; + pQueueCtrl->pUsedDescr = pQueueCtrl->pFirstDescr; + + /* Update RX Command register */ + pPortCtrl->portRxQueueCmdReg |= (1 << queue); + + /* update HW */ + MV_REG_WRITE( ETH_RX_CUR_DESC_PTR_REG(pPortCtrl->portNo, queue), + (MV_U32)ethDescVirtToPhy(pQueueCtrl, pQueueCtrl->pCurrentDescr) ); + } + else + { + /* Update RX Command register */ + pPortCtrl->portRxQueueCmdReg &= ~(1 << queue); + + /* update HW */ + MV_REG_WRITE( ETH_RX_CUR_DESC_PTR_REG(pPortCtrl->portNo, queue), 0); + } +} + +/******************************************************************************* +* etherInitTxDescRing - Curve a Tx chain desc list and buffer in memory. +* +* DESCRIPTION: +* This function prepares a Tx chained list of descriptors and packet +* buffers in a form of a ring. The routine must be called after port +* initialization routine and before port start routine. +* The Ethernet SDMA engine uses CPU bus addresses to access the various +* devices in the system (i.e. DRAM). This function uses the ethernet +* struct 'virtual to physical' routine (set by the user) to set the ring +* with physical addresses. +* +* INPUT: +* ETH_PORT_CTRL *pEthPortCtrl Ethernet Port Control srtuct. +* int txQueue Number of Tx queue. +* int txDescNum Number of Tx descriptors +* int txBuffSize Size of Tx buffer +* MV_U8* pTxDescBase Tx descriptors memory area base addr. +* +* OUTPUT: +* The routine updates the Ethernet port control struct with information +* regarding the Tx descriptors and buffers. +* +* RETURN: None. +* +*******************************************************************************/ +static void ethInitTxDescRing(ETH_PORT_CTRL* pPortCtrl, int queue) +{ + ETH_TX_DESC *pTxDescBase, *pTxDesc, *pTxPrevDesc; + int ix, txDescNum = pPortCtrl->txQueueConfig[queue].descrNum; + ETH_QUEUE_CTRL *pQueueCtrl = &pPortCtrl->txQueue[queue]; + + /* Make sure descriptor address is cache line size aligned */ + pTxDescBase = (ETH_TX_DESC*)MV_ALIGN_UP((MV_ULONG)pQueueCtrl->descBuf.bufVirtPtr, + CPU_D_CACHE_LINE_SIZE); + + pTxDesc = (ETH_TX_DESC*)pTxDescBase; + pTxPrevDesc = pTxDesc; + + /* initialize the Tx descriptors ring */ + for (ix=0; ixbyteCnt = 0x0000; + pTxDesc->L4iChk = 0x0000; + pTxDesc->cmdSts = ETH_BUFFER_OWNED_BY_HOST; + pTxDesc->bufPtr = 0x0; + pTxDesc->returnInfo = 0x0; + + pTxPrevDesc = pTxDesc; + + if(ix == (txDescNum-1)) + { + /* Closing Tx descriptors ring */ + pTxPrevDesc->nextDescPtr = (MV_U32)ethDescVirtToPhy(pQueueCtrl, (void*)pTxDescBase); + } + else + { + pTxDesc = (ETH_TX_DESC*)((MV_ULONG)pTxDesc + ETH_TX_DESC_ALIGNED_SIZE); + pTxPrevDesc->nextDescPtr = (MV_U32)ethDescVirtToPhy(pQueueCtrl, (void*)pTxDesc); + } + ETH_DESCR_FLUSH_INV(pPortCtrl, pTxPrevDesc); + } + + pQueueCtrl->pCurrentDescr = pTxDescBase; + pQueueCtrl->pUsedDescr = pTxDescBase; + + pQueueCtrl->pFirstDescr = pTxDescBase; + pQueueCtrl->pLastDescr = pTxDesc; + /* Leave one TX descriptor out of use */ + pQueueCtrl->resource = txDescNum - 1; +} + +void ethResetTxDescRing(void* pPortHndl, int queue) +{ + ETH_PORT_CTRL* pPortCtrl = (ETH_PORT_CTRL*)pPortHndl; + ETH_QUEUE_CTRL* pQueueCtrl = &pPortCtrl->txQueue[queue]; + ETH_TX_DESC* pTxDesc = (ETH_TX_DESC*)pQueueCtrl->pFirstDescr; + + pQueueCtrl->resource = 0; + if(pQueueCtrl->pFirstDescr != NULL) + { + while(MV_TRUE) + { + pTxDesc->byteCnt = 0x0000; + pTxDesc->L4iChk = 0x0000; + pTxDesc->cmdSts = ETH_BUFFER_OWNED_BY_HOST; + pTxDesc->bufPtr = 0x0; + pTxDesc->returnInfo = 0x0; + ETH_DESCR_FLUSH_INV(pPortCtrl, pTxDesc); + pQueueCtrl->resource++; + if( (void*)pTxDesc == pQueueCtrl->pLastDescr) + break; + pTxDesc = TX_NEXT_DESC_PTR(pTxDesc, pQueueCtrl); + } + /* Leave one TX descriptor out of use */ + pQueueCtrl->resource--; + pQueueCtrl->pCurrentDescr = pQueueCtrl->pFirstDescr; + pQueueCtrl->pUsedDescr = pQueueCtrl->pFirstDescr; + + /* Update TX Command register */ + pPortCtrl->portTxQueueCmdReg |= MV_32BIT_LE_FAST(1 << queue); + /* update HW */ + MV_REG_WRITE( ETH_TX_CUR_DESC_PTR_REG(pPortCtrl->portNo, queue), + (MV_U32)ethDescVirtToPhy(pQueueCtrl, pQueueCtrl->pCurrentDescr) ); + } + else + { + /* Update TX Command register */ + pPortCtrl->portTxQueueCmdReg &= MV_32BIT_LE_FAST(~(1 << queue)); + /* update HW */ + MV_REG_WRITE( ETH_TX_CUR_DESC_PTR_REG(pPortCtrl->portNo, queue), 0 ); + } +} + +/******************************************************************************* +* ethAllocDescrMemory - Free memory allocated for RX and TX descriptors. +* +* DESCRIPTION: +* This function allocates memory for RX and TX descriptors. +* - If ETH_DESCR_IN_SRAM defined, allocate memory from SRAM. +* - If ETH_DESCR_IN_SDRAM defined, allocate memory in SDRAM. +* +* INPUT: +* int size - size of memory should be allocated. +* +* RETURN: None +* +*******************************************************************************/ +static MV_U8* ethAllocDescrMemory(ETH_PORT_CTRL* pPortCtrl, int descSize, + MV_ULONG* pPhysAddr, MV_U32 *memHandle) +{ + MV_U8* pVirt; + +#if defined(ETH_DESCR_IN_SRAM) + if(ethDescInSram == MV_TRUE) + pVirt = (char*)mvSramMalloc(descSize, pPhysAddr); + else +#endif /* ETH_DESCR_IN_SRAM */ + { +#ifdef ETH_DESCR_UNCACHED + pVirt = (MV_U8*)mvOsIoUncachedMalloc(pPortCtrl->osHandle, descSize, + pPhysAddr,memHandle); +#else + pVirt = (MV_U8*)mvOsIoCachedMalloc(pPortCtrl->osHandle, descSize, + pPhysAddr, memHandle); +#endif /* ETH_DESCR_UNCACHED */ + } + memset(pVirt, 0, descSize); + + return pVirt; +} + +/******************************************************************************* +* ethFreeDescrMemory - Free memory allocated for RX and TX descriptors. +* +* DESCRIPTION: +* This function frees memory allocated for RX and TX descriptors. +* - If ETH_DESCR_IN_SRAM defined, free memory using gtSramFree() function. +* - If ETH_DESCR_IN_SDRAM defined, free memory using mvOsFree() function. +* +* INPUT: +* void* pVirtAddr - virtual pointer to memory allocated for RX and TX +* desriptors. +* +* RETURN: None +* +*******************************************************************************/ +void ethFreeDescrMemory(ETH_PORT_CTRL* pPortCtrl, MV_BUF_INFO* pDescBuf) +{ + if( (pDescBuf == NULL) || (pDescBuf->bufVirtPtr == NULL) ) + return; + +#if defined(ETH_DESCR_IN_SRAM) + if( ethDescInSram ) + { + mvSramFree(pDescBuf->bufSize, pDescBuf->bufPhysAddr, pDescBuf->bufVirtPtr); + return; + } +#endif /* ETH_DESCR_IN_SRAM */ + +#ifdef ETH_DESCR_UNCACHED + mvOsIoUncachedFree(pPortCtrl->osHandle, pDescBuf->bufSize, pDescBuf->bufPhysAddr, + pDescBuf->bufVirtPtr,pDescBuf->memHandle); +#else + mvOsIoCachedFree(pPortCtrl->osHandle, pDescBuf->bufSize, pDescBuf->bufPhysAddr, + pDescBuf->bufVirtPtr,pDescBuf->memHandle); +#endif /* ETH_DESCR_UNCACHED */ +} + +/******************************************************************************/ +/* Other Functions */ +/******************************************************************************/ + +void mvEthPortPowerUp(int port) +{ + MV_U32 regVal; + + /* MAC Cause register should be cleared */ + MV_REG_WRITE(ETH_UNIT_INTR_CAUSE_REG(port), 0); + + if (mvBoardIsPortInSgmii(port)) + mvEthPortSgmiiConfig(port); + + /* Cancel Port Reset */ + regVal = MV_REG_READ(ETH_PORT_SERIAL_CTRL_1_REG(port)); + regVal &= (~ETH_PORT_RESET_MASK); + MV_REG_WRITE(ETH_PORT_SERIAL_CTRL_1_REG(port), regVal); + while( (MV_REG_READ(ETH_PORT_SERIAL_CTRL_1_REG(port)) & ETH_PORT_RESET_MASK) != 0); +} + +void mvEthPortPowerDown(int port) +{ + MV_U32 regVal; + + /* Port must be DISABLED */ + regVal = MV_REG_READ(ETH_PORT_SERIAL_CTRL_REG(port)); + if( (regVal & ETH_PORT_ENABLE_MASK) != 0) + { + mvOsPrintf("ethPort #%d: PowerDown - port must be Disabled (PSC=0x%x)\n", + port, regVal); + return; + } + + /* Port Reset (Read after write the register as a precaution) */ + regVal = MV_REG_READ(ETH_PORT_SERIAL_CTRL_1_REG(port)); + MV_REG_WRITE(ETH_PORT_SERIAL_CTRL_1_REG(port), regVal | ETH_PORT_RESET_MASK); + while((MV_REG_READ(ETH_PORT_SERIAL_CTRL_1_REG(port)) & ETH_PORT_RESET_MASK) == 0); +} + +static void mvEthPortSgmiiConfig(int port) +{ + MV_U32 regVal; + + regVal = MV_REG_READ(ETH_PORT_SERIAL_CTRL_1_REG(port)); + + regVal |= (ETH_SGMII_MODE_MASK /*| ETH_INBAND_AUTO_NEG_ENABLE_MASK */); + regVal &= (~ETH_INBAND_AUTO_NEG_BYPASS_MASK); + + MV_REG_WRITE(ETH_PORT_SERIAL_CTRL_1_REG(port), regVal); +} + + + + + + + + + diff --git a/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/mv_hal/eth/gbe/mvEthDebug.c b/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/mv_hal/eth/gbe/mvEthDebug.c new file mode 100644 index 0000000000..eabac5ad93 --- /dev/null +++ b/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/mv_hal/eth/gbe/mvEthDebug.c @@ -0,0 +1,748 @@ +/******************************************************************************* +Copyright (C) Marvell International Ltd. and its affiliates + +This software file (the "File") is owned and distributed by Marvell +International Ltd. and/or its affiliates ("Marvell") under the following +alternative licensing terms. Once you have made an election to distribute the +File under one of the following license alternatives, please (i) delete this +introductory statement regarding license alternatives, (ii) delete the two +license alternatives that you have not elected to use and (iii) preserve the +Marvell copyright notice above. + +******************************************************************************** +Marvell Commercial License Option + +If you received this File from Marvell and you have entered into a commercial +license agreement (a "Commercial License") with Marvell, the File is licensed +to you under the terms of the applicable Commercial License. + +******************************************************************************** +Marvell GPL License Option + +If you received this File from Marvell, you may opt to use, redistribute and/or +modify this File in accordance with the terms and conditions of the General +Public License Version 2, June 1991 (the "GPL License"), a copy of which is +available along with the File in the license.txt file or by writing to the Free +Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or +on the worldwide web at http://www.gnu.org/licenses/gpl.txt. + +THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED +WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY +DISCLAIMED. The GPL License provides additional details about this warranty +disclaimer. +******************************************************************************** +Marvell BSD License Option + +If you received this File from Marvell, you may opt to use, redistribute and/or +modify this File under the following licensing terms. +Redistribution and use in source and binary forms, with or without modification, +are permitted provided that the following conditions are met: + + * Redistributions of source code must retain the above copyright notice, + this list of conditions and the following disclaimer. + + * Redistributions in binary form must reproduce the above copyright + notice, this list of conditions and the following disclaimer in the + documentation and/or other materials provided with the distribution. + + * Neither the name of Marvell nor the names of its contributors may be + used to endorse or promote products derived from this software without + specific prior written permission. + +THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND +ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED +WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE +DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR +ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES +(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; +LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON +ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS +SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + +*******************************************************************************/ + +/******************************************************************************* +* mvEthDebug.c - Source file for user friendly debug functions +* +* DESCRIPTION: +* +* DEPENDENCIES: +* None. +* +*******************************************************************************/ + +#include "mvOs.h" +#include "mvCommon.h" +#include "mvTypes.h" +#include "mv802_3.h" +#include "mvDebug.h" +#include "ctrlEnv/mvCtrlEnvLib.h" +#include "eth-phy/mvEthPhy.h" +#include "eth/mvEth.h" +#include "eth/gbe/mvEthDebug.h" + +/* #define mvOsPrintf printf */ + +void mvEthPortShow(void* pHndl); +void mvEthQueuesShow(void* pHndl, int rxQueue, int txQueue, int mode); + +/******************************************************************************/ +/* Debug functions */ +/******************************************************************************/ +void ethRxCoal(int port, int usec) +{ + void* pHndl; + + pHndl = mvEthPortHndlGet(port); + if(pHndl != NULL) + { + mvEthRxCoalSet(pHndl, usec); + } +} + +void ethTxCoal(int port, int usec) +{ + void* pHndl; + + pHndl = mvEthPortHndlGet(port); + if(pHndl != NULL) + { + mvEthTxCoalSet(pHndl, usec); + } +} + +#if (MV_ETH_VERSION >= 4) +void ethEjpModeSet(int port, int mode) +{ + void* pHndl; + + pHndl = mvEthPortHndlGet(port); + if(pHndl != NULL) + { + mvEthEjpModeSet(pHndl, mode); + } +} +#endif /* (MV_ETH_VERSION >= 4) */ + +void ethBpduRxQ(int port, int bpduQueue) +{ + void* pHndl; + + pHndl = mvEthPortHndlGet(port); + if(pHndl != NULL) + { + mvEthBpduRxQueue(pHndl, bpduQueue); + } +} + +void ethArpRxQ(int port, int arpQueue) +{ + void* pHndl; + + pHndl = mvEthPortHndlGet(port); + if(pHndl != NULL) + { + mvEthArpRxQueue(pHndl, arpQueue); + } +} + +void ethTcpRxQ(int port, int tcpQueue) +{ + void* pHndl; + + pHndl = mvEthPortHndlGet(port); + if(pHndl != NULL) + { + mvEthTcpRxQueue(pHndl, tcpQueue); + } +} + +void ethUdpRxQ(int port, int udpQueue) +{ + void* pHndl; + + pHndl = mvEthPortHndlGet(port); + if(pHndl != NULL) + { + mvEthUdpRxQueue(pHndl, udpQueue); + } +} + +void ethTxPolicyRegs(int port) +{ + int queue; + ETH_PORT_CTRL* pPortCtrl = (ETH_PORT_CTRL*)mvEthPortHndlGet(port); + + if(pPortCtrl == NULL) + { + return; + } + mvOsPrintf("Port #%d TX Policy: EJP=%d, TXQs: ", + port, pPortCtrl->portConfig.ejpMode); + for(queue=0; queuetxQueueConfig[queue].descrNum > 0) + mvOsPrintf("%d, ", queue); + } + mvOsPrintf("\n"); + + mvOsPrintf("\n\t TX policy Port #%d configuration registers\n", port); + + mvOsPrintf("ETH_TX_QUEUE_COMMAND_REG : 0x%X = 0x%08x\n", + ETH_TX_QUEUE_COMMAND_REG(port), + MV_REG_READ( ETH_TX_QUEUE_COMMAND_REG(port) ) ); + + mvOsPrintf("ETH_TX_FIXED_PRIO_CFG_REG : 0x%X = 0x%08x\n", + ETH_TX_FIXED_PRIO_CFG_REG(port), + MV_REG_READ( ETH_TX_FIXED_PRIO_CFG_REG(port) ) ); + + mvOsPrintf("ETH_TX_TOKEN_RATE_CFG_REG : 0x%X = 0x%08x\n", + ETH_TX_TOKEN_RATE_CFG_REG(port), + MV_REG_READ( ETH_TX_TOKEN_RATE_CFG_REG(port) ) ); + + mvOsPrintf("ETH_MAX_TRANSMIT_UNIT_REG : 0x%X = 0x%08x\n", + ETH_MAX_TRANSMIT_UNIT_REG(port), + MV_REG_READ( ETH_MAX_TRANSMIT_UNIT_REG(port) ) ); + + mvOsPrintf("ETH_TX_TOKEN_BUCKET_SIZE_REG : 0x%X = 0x%08x\n", + ETH_TX_TOKEN_BUCKET_SIZE_REG(port), + MV_REG_READ( ETH_TX_TOKEN_BUCKET_SIZE_REG(port) ) ); + + mvOsPrintf("ETH_TX_TOKEN_BUCKET_COUNT_REG : 0x%X = 0x%08x\n", + ETH_TX_TOKEN_BUCKET_COUNT_REG(port), + MV_REG_READ( ETH_TX_TOKEN_BUCKET_COUNT_REG(port) ) ); + + for(queue=0; queue> 24) & 0xff), ((macH >> 16) & 0xff), + ((macH >> 8) & 0xff), (macH & 0xff), + ((macL >> 8) & 0xff), (macL & 0xff) ); + + for (i=0; i<4; i++) + { + unicastReg = MV_REG_READ( (ETH_DA_FILTER_UCAST_BASE(port) + i*4)); + for(j=0; j<4; j++) + { + MV_U8 macEntry = (unicastReg >> (8*j)) & 0xFF; + + mvOsPrintf("%X: %8s, Q = %d\n", i*4+j, + (macEntry & BIT0) ? "Accept" : "Reject", (macEntry >> 1) & 0x7); + } + } +} + +void ethMcastAdd(int port, char* macStr, int queue) +{ + void* pHndl; + MV_U8 macAddr[MV_MAC_ADDR_SIZE]; + + pHndl = mvEthPortHndlGet(port); + if(pHndl != NULL) + { + mvMacStrToHex(macStr, macAddr); + mvEthMcastAddrSet(pHndl, macAddr, queue); + } +} + +void ethPortMcast(int port) +{ + int tblIdx, regIdx; + MV_U32 regVal; + + mvOsPrintf("\n\t Port #%d Special (IP) Multicast table: 01:00:5E:00:00:XX\n\n", + port); + + for(tblIdx=0; tblIdx<(256/4); tblIdx++) + { + regVal = MV_REG_READ((ETH_DA_FILTER_SPEC_MCAST_BASE(port) + tblIdx*4)); + for(regIdx=0; regIdx<4; regIdx++) + { + if((regVal & (0x01 << (regIdx*8))) != 0) + { + mvOsPrintf("0x%02X: Accepted, rxQ = %d\n", + tblIdx*4+regIdx, ((regVal >> (regIdx*8+1)) & 0x07)); + } + } + } + mvOsPrintf("\n\t Port #%d Other Multicast table\n\n", port); + for(tblIdx=0; tblIdx<(256/4); tblIdx++) + { + regVal = MV_REG_READ((ETH_DA_FILTER_OTH_MCAST_BASE(port) + tblIdx*4)); + for(regIdx=0; regIdx<4; regIdx++) + { + if((regVal & (0x01 << (regIdx*8))) != 0) + { + mvOsPrintf("Crc8=0x%02X: Accepted, rxQ = %d\n", + tblIdx*4+regIdx, ((regVal >> (regIdx*8+1)) & 0x07)); + } + } + } +} + + +/* Print status of Ethernet port */ +void mvEthPortShow(void* pHndl) +{ + MV_U32 regValue, rxCoal, txCoal; + int speed, queue, port; + ETH_PORT_CTRL* pPortCtrl = (ETH_PORT_CTRL*)pHndl; + + port = pPortCtrl->portNo; + + regValue = MV_REG_READ( ETH_PORT_STATUS_REG(port) ); + + mvOsPrintf("\n\t ethGiga #%d port Status: 0x%04x = 0x%08x\n\n", + port, ETH_PORT_STATUS_REG(port), regValue); + + mvOsPrintf("descInSram=%d, descSwCoher=%d\n", + ethDescInSram, ethDescSwCoher); + + if(regValue & ETH_GMII_SPEED_1000_MASK) + speed = 1000; + else if(regValue & ETH_MII_SPEED_100_MASK) + speed = 100; + else + speed = 10; + + mvEthCoalGet(pPortCtrl, &rxCoal, &txCoal); + + /* Link, Speed, Duplex, FlowControl */ + mvOsPrintf("Link=%s, Speed=%d, Duplex=%s, RxFlowControl=%s", + (regValue & ETH_LINK_UP_MASK) ? "UP" : "DOWN", + speed, + (regValue & ETH_FULL_DUPLEX_MASK) ? "FULL" : "HALF", + (regValue & ETH_ENABLE_RCV_FLOW_CTRL_MASK) ? "ENABLE" : "DISABLE"); + + mvOsPrintf("\n"); + + mvOsPrintf("RxCoal = %d usec, TxCoal = %d usec\n", + rxCoal, txCoal); + + mvOsPrintf("rxDefQ=%d, arpQ=%d, bpduQ=%d, tcpQ=%d, udpQ=%d\n\n", + pPortCtrl->portConfig.rxDefQ, pPortCtrl->portConfig.rxArpQ, + pPortCtrl->portConfig.rxBpduQ, + pPortCtrl->portConfig.rxTcpQ, pPortCtrl->portConfig.rxUdpQ); + + /* Print all RX and TX queues */ + for(queue=0; queuerxQueue[queue].pFirstDescr, + mvEthRxResourceGet(pPortCtrl, queue) ); + } + mvOsPrintf("\n"); + for(queue=0; queuetxQueue[queue].pFirstDescr, + mvEthTxResourceGet(pPortCtrl, queue) ); + } +} + +/* Print RX and TX queue of the Ethernet port */ +void mvEthQueuesShow(void* pHndl, int rxQueue, int txQueue, int mode) +{ + ETH_PORT_CTRL *pPortCtrl = (ETH_PORT_CTRL*)pHndl; + ETH_QUEUE_CTRL *pQueueCtrl; + MV_U32 regValue; + ETH_RX_DESC *pRxDescr; + ETH_TX_DESC *pTxDescr; + int i, port = pPortCtrl->portNo; + + if( (rxQueue >=0) && (rxQueue < MV_ETH_RX_Q_NUM) ) + { + pQueueCtrl = &(pPortCtrl->rxQueue[rxQueue]); + mvOsPrintf("Port #%d, RX Queue #%d\n\n", port, rxQueue); + + mvOsPrintf("CURR_RX_DESC_PTR : 0x%X = 0x%08x\n", + ETH_RX_CUR_DESC_PTR_REG(port, rxQueue), + MV_REG_READ( ETH_RX_CUR_DESC_PTR_REG(port, rxQueue))); + + + if(pQueueCtrl->pFirstDescr != NULL) + { + mvOsPrintf("pFirstDescr=0x%lx, pLastDescr=0x%lx, numOfResources=%d\n", + (MV_ULONG)pQueueCtrl->pFirstDescr, (MV_ULONG)pQueueCtrl->pLastDescr, + pQueueCtrl->resource); + mvOsPrintf("pCurrDescr: 0x%lx, pUsedDescr: 0x%lx\n", + (MV_ULONG)pQueueCtrl->pCurrentDescr, + (MV_ULONG)pQueueCtrl->pUsedDescr); + + if(mode == 1) + { + pRxDescr = (ETH_RX_DESC*)pQueueCtrl->pFirstDescr; + i = 0; + do + { + mvOsPrintf("%3d. desc=%08x (%08x), cmd=%08x, data=%4d, buf=%4d, buf=%08x, pkt=%lx, os=%lx\n", + i, (MV_U32)pRxDescr, (MV_U32)ethDescVirtToPhy(pQueueCtrl, (MV_U8*)pRxDescr), + pRxDescr->cmdSts, pRxDescr->byteCnt, (MV_U32)pRxDescr->bufSize, + (unsigned int)pRxDescr->bufPtr, (MV_ULONG)pRxDescr->returnInfo, + ((MV_PKT_INFO*)pRxDescr->returnInfo)->osInfo); + + ETH_DESCR_INV(pPortCtrl, pRxDescr); + pRxDescr = RX_NEXT_DESC_PTR(pRxDescr, pQueueCtrl); + i++; + } while (pRxDescr != pQueueCtrl->pFirstDescr); + } + } + else + mvOsPrintf("RX Queue #%d is NOT CREATED\n", rxQueue); + } + + if( (txQueue >=0) && (txQueue < MV_ETH_TX_Q_NUM) ) + { + pQueueCtrl = &(pPortCtrl->txQueue[txQueue]); + mvOsPrintf("Port #%d, TX Queue #%d\n\n", port, txQueue); + + regValue = MV_REG_READ( ETH_TX_CUR_DESC_PTR_REG(port, txQueue)); + mvOsPrintf("CURR_TX_DESC_PTR : 0x%X = 0x%08x\n", + ETH_TX_CUR_DESC_PTR_REG(port, txQueue), regValue); + + if(pQueueCtrl->pFirstDescr != NULL) + { + mvOsPrintf("pFirstDescr=0x%lx, pLastDescr=0x%lx, numOfResources=%d\n", + (MV_ULONG)pQueueCtrl->pFirstDescr, + (MV_ULONG)pQueueCtrl->pLastDescr, + pQueueCtrl->resource); + mvOsPrintf("pCurrDescr: 0x%lx, pUsedDescr: 0x%lx\n", + (MV_ULONG)pQueueCtrl->pCurrentDescr, + (MV_ULONG)pQueueCtrl->pUsedDescr); + + if(mode == 1) + { + pTxDescr = (ETH_TX_DESC*)pQueueCtrl->pFirstDescr; + i = 0; + do + { + mvOsPrintf("%3d. desc=%08x (%08x), cmd=%08x, data=%4d, buf=%08x, pkt=%lx, os=%lx\n", + i, (MV_U32)pTxDescr, (MV_U32)ethDescVirtToPhy(pQueueCtrl, (MV_U8*)pTxDescr), + pTxDescr->cmdSts, pTxDescr->byteCnt, + (MV_U32)pTxDescr->bufPtr, (MV_ULONG)pTxDescr->returnInfo, + pTxDescr->returnInfo ? (((MV_PKT_INFO*)pTxDescr->returnInfo)->osInfo) : 0x0); + + ETH_DESCR_INV(pPortCtrl, pTxDescr); + pTxDescr = TX_NEXT_DESC_PTR(pTxDescr, pQueueCtrl); + i++; + } while (pTxDescr != pQueueCtrl->pFirstDescr); + } + } + else + mvOsPrintf("TX Queue #%d is NOT CREATED\n", txQueue); + } +} diff --git a/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/mv_hal/eth/gbe/mvEthDebug.h b/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/mv_hal/eth/gbe/mvEthDebug.h new file mode 100644 index 0000000000..6db85f7a75 --- /dev/null +++ b/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/mv_hal/eth/gbe/mvEthDebug.h @@ -0,0 +1,146 @@ +/******************************************************************************* +Copyright (C) Marvell International Ltd. and its affiliates + +This software file (the "File") is owned and distributed by Marvell +International Ltd. and/or its affiliates ("Marvell") under the following +alternative licensing terms. Once you have made an election to distribute the +File under one of the following license alternatives, please (i) delete this +introductory statement regarding license alternatives, (ii) delete the two +license alternatives that you have not elected to use and (iii) preserve the +Marvell copyright notice above. + +******************************************************************************** +Marvell Commercial License Option + +If you received this File from Marvell and you have entered into a commercial +license agreement (a "Commercial License") with Marvell, the File is licensed +to you under the terms of the applicable Commercial License. + +******************************************************************************** +Marvell GPL License Option + +If you received this File from Marvell, you may opt to use, redistribute and/or +modify this File in accordance with the terms and conditions of the General +Public License Version 2, June 1991 (the "GPL License"), a copy of which is +available along with the File in the license.txt file or by writing to the Free +Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or +on the worldwide web at http://www.gnu.org/licenses/gpl.txt. + +THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED +WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY +DISCLAIMED. The GPL License provides additional details about this warranty +disclaimer. +******************************************************************************** +Marvell BSD License Option + +If you received this File from Marvell, you may opt to use, redistribute and/or +modify this File under the following licensing terms. +Redistribution and use in source and binary forms, with or without modification, +are permitted provided that the following conditions are met: + + * Redistributions of source code must retain the above copyright notice, + this list of conditions and the following disclaimer. + + * Redistributions in binary form must reproduce the above copyright + notice, this list of conditions and the following disclaimer in the + documentation and/or other materials provided with the distribution. + + * Neither the name of Marvell nor the names of its contributors may be + used to endorse or promote products derived from this software without + specific prior written permission. + +THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND +ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED +WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE +DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR +ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES +(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; +LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON +ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS +SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + +*******************************************************************************/ +#ifndef __MV_ETH_DEBUG_H__ +#define __MV_ETH_DEBUG_H__ + +#if 0 +/* + ** Externs + */ +void ethBpduRxQ(int port, int bpduQueue); +void ethArpRxQ(int port, int bpduQueue); +void ethTcpRxQ(int port, int bpduQueue); +void ethUdpRxQ(int port, int bpduQueue); +void ethMcastAdd(int port, char* macStr, int queue); + +#ifdef INCLUDE_MULTI_QUEUE +void ethRxPolicy( int port); +void ethTxPolicy( int port); +void ethTxPolDA(int port, char* macStr, int txQ, char* headerHexStr); +void ethRxPolMode(int port, MV_ETH_PRIO_MODE prioMode); +void ethRxPolQ(int port, int rxQueue, int rxQuota); +#endif /* INCLUDE_MULTI_QUEUE */ + +void print_egiga_stat(void *sc, unsigned int port); +void ethPortStatus (int port); +void ethPortQueues( int port, int rxQueue, int txQueue, int mode); +void ethPortMcast(int port); +void ethPortRegs(int port); +void ethPortCounters(int port); +void ethPortRmonCounters(int port); +void ethRxCoal(int port, int usec); +void ethTxCoal(int port, int usec); + +void ethRegs(int port); +void ethClearCounters(int port); +void ethUcastSet(int port, char* macStr, int queue); +void ethPortUcastShow(int port); + +#ifdef CONFIG_MV_ETH_HEADER +void run_com_header(const char *buffer); +#endif + +#ifdef INCLUDE_MULTI_QUEUE +void ethRxPolMode(int port, MV_ETH_PRIO_MODE prioMode); +void ethRxPolQ(int port, int queue, int quota); +void ethRxPolicy(int port); +void ethTxPolDef(int port, int txQ, char* headerHexStr); +void ethTxPolDA(int port, char* macStr, int txQ, char* headerHexStr); +void ethTxPolicy(int port); +#endif /* INCLUDE_MULTI_QUEUE */ + +#if (MV_ETH_VERSION >= 4) +void ethEjpModeSet(int port, int mode) +#endif +#endif /* 0 */ + + + + +void ethRxCoal(int port, int usec); +void ethTxCoal(int port, int usec); +#if (MV_ETH_VERSION >= 4) +void ethEjpModeSet(int port, int mode); +#endif /* (MV_ETH_VERSION >= 4) */ + +void ethBpduRxQ(int port, int bpduQueue); +void ethArpRxQ(int port, int arpQueue); +void ethTcpRxQ(int port, int tcpQueue); +void ethUdpRxQ(int port, int udpQueue); +void ethTxPolicyRegs(int port); +void ethPortRegs(int port); +void ethRegs(int port); +void ethClearCounters(int port); +void ethPortCounters(int port); +void ethPortRmonCounters(int port); +void ethPortStatus(int port); +void ethPortQueues(int port, int rxQueue, int txQueue, int mode); +void ethUcastSet(int port, char* macStr, int queue); +void ethPortUcastShow(int port); +void ethMcastAdd(int port, char* macStr, int queue); +void ethPortMcast(int port); +void mvEthPortShow(void* pHndl); +void mvEthQueuesShow(void* pHndl, int rxQueue, int txQueue, int mode); + +#endif diff --git a/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/mv_hal/eth/gbe/mvEthGbe.h b/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/mv_hal/eth/gbe/mvEthGbe.h new file mode 100644 index 0000000000..f4cae50781 --- /dev/null +++ b/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/mv_hal/eth/gbe/mvEthGbe.h @@ -0,0 +1,751 @@ +/******************************************************************************* +Copyright (C) Marvell International Ltd. and its affiliates + +This software file (the "File") is owned and distributed by Marvell +International Ltd. and/or its affiliates ("Marvell") under the following +alternative licensing terms. Once you have made an election to distribute the +File under one of the following license alternatives, please (i) delete this +introductory statement regarding license alternatives, (ii) delete the two +license alternatives that you have not elected to use and (iii) preserve the +Marvell copyright notice above. + +******************************************************************************** +Marvell Commercial License Option + +If you received this File from Marvell and you have entered into a commercial +license agreement (a "Commercial License") with Marvell, the File is licensed +to you under the terms of the applicable Commercial License. + +******************************************************************************** +Marvell GPL License Option + +If you received this File from Marvell, you may opt to use, redistribute and/or +modify this File in accordance with the terms and conditions of the General +Public License Version 2, June 1991 (the "GPL License"), a copy of which is +available along with the File in the license.txt file or by writing to the Free +Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or +on the worldwide web at http://www.gnu.org/licenses/gpl.txt. + +THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED +WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY +DISCLAIMED. The GPL License provides additional details about this warranty +disclaimer. +******************************************************************************** +Marvell BSD License Option + +If you received this File from Marvell, you may opt to use, redistribute and/or +modify this File under the following licensing terms. +Redistribution and use in source and binary forms, with or without modification, +are permitted provided that the following conditions are met: + + * Redistributions of source code must retain the above copyright notice, + this list of conditions and the following disclaimer. + + * Redistributions in binary form must reproduce the above copyright + notice, this list of conditions and the following disclaimer in the + documentation and/or other materials provided with the distribution. + + * Neither the name of Marvell nor the names of its contributors may be + used to endorse or promote products derived from this software without + specific prior written permission. + +THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND +ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED +WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE +DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR +ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES +(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; +LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON +ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS +SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + +*******************************************************************************/ + +/******************************************************************************* +* mvEth.h - Header File for : Marvell Gigabit Ethernet Controller +* +* DESCRIPTION: +* This header file contains macros typedefs and function declaration specific to +* the Marvell Gigabit Ethernet Controller. +* +* DEPENDENCIES: +* None. +* +*******************************************************************************/ + +#ifndef __mvEthGbe_h__ +#define __mvEthGbe_h__ + +extern MV_BOOL ethDescInSram; +extern MV_BOOL ethDescSwCoher; +extern ETH_PORT_CTRL* ethPortCtrl[]; + +static INLINE MV_ULONG ethDescVirtToPhy(ETH_QUEUE_CTRL* pQueueCtrl, MV_U8* pDesc) +{ +#if defined (ETH_DESCR_IN_SRAM) + if( ethDescInSram ) + return mvSramVirtToPhy(pDesc); + else +#endif /* ETH_DESCR_IN_SRAM */ + return (pQueueCtrl->descBuf.bufPhysAddr + (pDesc - pQueueCtrl->descBuf.bufVirtPtr)); +} +/* Return port handler */ +#define mvEthPortHndlGet(port) ethPortCtrl[port] + +/* Used as WA for HW/SW race on TX */ +static INLINE int mvEthPortTxEnable(void* pPortHndl, int queue, int max_deep) +{ + int deep = 0; + MV_U32 txCurrReg, txEnReg; + ETH_TX_DESC* pTxLastDesc; + ETH_QUEUE_CTRL* pQueueCtrl; + ETH_PORT_CTRL* pPortCtrl = (ETH_PORT_CTRL*)pPortHndl; + + txEnReg = MV_REG_VALUE(ETH_TX_QUEUE_COMMAND_REG(pPortCtrl->portNo)); + if( (txEnReg & MV_32BIT_LE_FAST(ETH_TXQ_ENABLE_MASK)) == 0) + { + MV_REG_VALUE(ETH_TX_QUEUE_COMMAND_REG(pPortCtrl->portNo)) = pPortCtrl->portTxQueueCmdReg; + return 0; + } + + pQueueCtrl = &pPortCtrl->txQueue[queue]; + pTxLastDesc = pQueueCtrl->pCurrentDescr; + txCurrReg = MV_REG_READ(ETH_TX_CUR_DESC_PTR_REG(pPortCtrl->portNo, queue)); + if(ethDescVirtToPhy(pQueueCtrl, (MV_U8*)pTxLastDesc) == txCurrReg) + { + /* All descriptors are processed, no chance for race */ + return 0; + } + + /* Check distance betwee HW and SW location: */ + /* If distance between HW and SW pointers is less than max_deep descriptors */ + /* Race condition is possible, so wait end of TX and restart TXQ */ + while(deep < max_deep) + { + pTxLastDesc = TX_PREV_DESC_PTR(pTxLastDesc, pQueueCtrl); + if(ethDescVirtToPhy(pQueueCtrl, (MV_U8*)pTxLastDesc) == txCurrReg) + { + int count = 0; + + while( (txEnReg & MV_32BIT_LE_FAST(ETH_TXQ_ENABLE_MASK)) != 0) + { + count++; + if(count > 10000) + { + mvOsPrintf("mvEthPortTxEnable: timeout - TXQ_CMD=0x%08x\n", + MV_REG_READ(ETH_TX_QUEUE_COMMAND_REG(pPortCtrl->portNo)) ); + break; + } + txEnReg = MV_REG_VALUE(ETH_TX_QUEUE_COMMAND_REG(pPortCtrl->portNo)); + } + + MV_REG_VALUE(ETH_TX_QUEUE_COMMAND_REG(pPortCtrl->portNo)) = pPortCtrl->portTxQueueCmdReg; + return count; + } + deep++; + } + /* Distance between HW and SW pointers is more than max_deep descriptors, */ + /* So NO race condition - do nothing */ + return -1; +} + + +/* defines */ +#define ETH_CSUM_MIN_BYTE_COUNT 72 + +/* Tailgate and Kirwood have only 2K TX FIFO */ +#if (MV_ETH_VERSION == 2) || (MV_ETH_VERSION == 4) +#define ETH_CSUM_MAX_BYTE_COUNT 1600 +#else +#define ETH_CSUM_MAX_BYTE_COUNT 9*1024 +#endif /* MV_ETH_VERSION */ + +#define ETH_MV_HEADER_SIZE 2 +#define ETH_MV_TX_EN + +/* An offest in Tx descriptors to store data for buffers less than 8 Bytes */ +#define MIN_TX_BUFF_LOAD 8 +#define TX_BUF_OFFSET_IN_DESC (ETH_TX_DESC_ALIGNED_SIZE - MIN_TX_BUFF_LOAD) + +/* Default port configuration value */ +#define PORT_CONFIG_VALUE \ + ETH_DEF_RX_QUEUE_MASK(0) | \ + ETH_DEF_RX_ARP_QUEUE_MASK(0) | \ + ETH_DEF_RX_TCP_QUEUE_MASK(0) | \ + ETH_DEF_RX_UDP_QUEUE_MASK(0) | \ + ETH_DEF_RX_BPDU_QUEUE_MASK(0) | \ + ETH_RX_CHECKSUM_WITH_PSEUDO_HDR + +/* Default port extend configuration value */ +#define PORT_CONFIG_EXTEND_VALUE 0 + +#define PORT_SERIAL_CONTROL_VALUE \ + ETH_DISABLE_FC_AUTO_NEG_MASK | \ + BIT9 | \ + ETH_DO_NOT_FORCE_LINK_FAIL_MASK | \ + ETH_MAX_RX_PACKET_1552BYTE | \ + ETH_SET_FULL_DUPLEX_MASK + +#define PORT_SERIAL_CONTROL_100MB_FORCE_VALUE \ + ETH_FORCE_LINK_PASS_MASK | \ + ETH_DISABLE_DUPLEX_AUTO_NEG_MASK | \ + ETH_DISABLE_FC_AUTO_NEG_MASK | \ + BIT9 | \ + ETH_DO_NOT_FORCE_LINK_FAIL_MASK | \ + ETH_DISABLE_SPEED_AUTO_NEG_MASK | \ + ETH_SET_FULL_DUPLEX_MASK | \ + ETH_SET_MII_SPEED_100_MASK | \ + ETH_MAX_RX_PACKET_1552BYTE + + +#define PORT_SERIAL_CONTROL_1000MB_FORCE_VALUE \ + ETH_FORCE_LINK_PASS_MASK | \ + ETH_DISABLE_DUPLEX_AUTO_NEG_MASK | \ + ETH_DISABLE_FC_AUTO_NEG_MASK | \ + BIT9 | \ + ETH_DO_NOT_FORCE_LINK_FAIL_MASK | \ + ETH_DISABLE_SPEED_AUTO_NEG_MASK | \ + ETH_SET_FULL_DUPLEX_MASK | \ + ETH_SET_GMII_SPEED_1000_MASK | \ + ETH_MAX_RX_PACKET_1552BYTE + +#define PORT_SERIAL_CONTROL_SGMII_IBAN_VALUE \ + ETH_DISABLE_FC_AUTO_NEG_MASK | \ + BIT9 | \ + ETH_IN_BAND_AN_EN_MASK | \ + ETH_DO_NOT_FORCE_LINK_FAIL_MASK | \ + ETH_MAX_RX_PACKET_1552BYTE + +/* Function headers: */ +MV_VOID mvEthSetSpecialMcastTable(int portNo, int queue); +MV_STATUS mvEthArpRxQueue(void* pPortHandle, int arpQueue); +MV_STATUS mvEthUdpRxQueue(void* pPortHandle, int udpQueue); +MV_STATUS mvEthTcpRxQueue(void* pPortHandle, int tcpQueue); +MV_STATUS mvEthMacAddrGet(int portNo, unsigned char *pAddr); +MV_VOID mvEthSetOtherMcastTable(int portNo, int queue); +MV_STATUS mvEthHeaderModeSet(void* pPortHandle, MV_ETH_HEADER_MODE headerMode); +/* Interrupt Coalesting functions */ +MV_U32 mvEthRxCoalSet(void* pPortHndl, MV_U32 uSec); +MV_U32 mvEthTxCoalSet(void* pPortHndl, MV_U32 uSec); +MV_STATUS mvEthCoalGet(void* pPortHndl, MV_U32* pRxCoal, MV_U32* pTxCoal); + +/******************************************************************************/ +/* Data Flow functions */ +/******************************************************************************/ +static INLINE void mvEthPortTxRestart(void* pPortHndl) +{ + ETH_PORT_CTRL* pPortCtrl = (ETH_PORT_CTRL*)pPortHndl; + + MV_REG_VALUE(ETH_TX_QUEUE_COMMAND_REG(pPortCtrl->portNo)) = pPortCtrl->portTxQueueCmdReg; +} + +/* Get number of Free resources in specific TX queue */ +static INLINE int mvEthTxResourceGet(void* pPortHndl, int txQueue) +{ + ETH_PORT_CTRL* pPortCtrl = (ETH_PORT_CTRL*)pPortHndl; + + return (pPortCtrl->txQueue[txQueue].resource); +} + +/* Get number of Free resources in specific RX queue */ +static INLINE int mvEthRxResourceGet(void* pPortHndl, int rxQueue) +{ + ETH_PORT_CTRL* pPortCtrl = (ETH_PORT_CTRL*)pPortHndl; + + return (pPortCtrl->rxQueue[rxQueue].resource); +} + +static INLINE int mvEthTxQueueIsFull(void* pPortHndl, int txQueue) +{ + ETH_PORT_CTRL* pPortCtrl = (ETH_PORT_CTRL*)pPortHndl; + + if(pPortCtrl->txQueue[txQueue].resource == 0) + return MV_TRUE; + + return MV_FALSE; +} + +/* Get number of Free resources in specific RX queue */ +static INLINE int mvEthRxQueueIsFull(void* pPortHndl, int rxQueue) +{ + ETH_PORT_CTRL* pPortCtrl = (ETH_PORT_CTRL*)pPortHndl; + ETH_QUEUE_CTRL* pQueueCtrl = &pPortCtrl->rxQueue[rxQueue]; + + if( (pQueueCtrl->pUsedDescr == pQueueCtrl->pCurrentDescr) && + (pQueueCtrl->resource != 0) ) + return MV_TRUE; + + return MV_FALSE; +} + +static INLINE int mvEthTxQueueIsEmpty(void* pPortHndl, int txQueue) +{ + ETH_PORT_CTRL* pPortCtrl = (ETH_PORT_CTRL*)pPortHndl; + ETH_QUEUE_CTRL* pQueueCtrl = &pPortCtrl->txQueue[txQueue]; + + if( (pQueueCtrl->pUsedDescr == pQueueCtrl->pCurrentDescr) && + (pQueueCtrl->resource != 0) ) + { + return MV_TRUE; + } + return MV_FALSE; +} + +/* Get number of Free resources in specific RX queue */ +static INLINE int mvEthRxQueueIsEmpty(void* pPortHndl, int rxQueue) +{ + ETH_PORT_CTRL* pPortCtrl = (ETH_PORT_CTRL*)pPortHndl; + + if(pPortCtrl->rxQueue[rxQueue].resource == 0) + return MV_TRUE; + + return MV_FALSE; +} + +/******************************************************************************* +* mvEthPortTx - Send an Ethernet packet +* +* DESCRIPTION: +* This routine send a given packet described by pPktInfo parameter. +* Single buffer only. +* +* INPUT: +* void* pEthPortHndl - Ethernet Port handler. +* int txQueue - Number of Tx queue. +* MV_PKT_INFO *pPktInfo - User packet to send. +* +* RETURN: +* MV_NO_RESOURCE - No enough resources to send this packet. +* MV_ERROR - Unexpected Fatal error. +* MV_OK - Packet send successfully. +* +*******************************************************************************/ +static INLINE MV_STATUS mvEthPortTx(void* pEthPortHndl, int txQueue, MV_PKT_INFO* pPktInfo) +{ + ETH_TX_DESC* pTxCurrDesc; + ETH_PORT_CTRL* pPortCtrl = (ETH_PORT_CTRL*)pEthPortHndl; + ETH_QUEUE_CTRL* pQueueCtrl; + int portNo; + MV_BUF_INFO* pBufInfo = pPktInfo->pFrags; + +#ifdef ETH_DEBUG + if(pPortCtrl->portState != MV_ACTIVE) + return MV_BAD_STATE; +#endif /* ETH_DEBUG */ + + portNo = pPortCtrl->portNo; + pQueueCtrl = &pPortCtrl->txQueue[txQueue]; + + /* Get the Tx Desc ring indexes */ + pTxCurrDesc = pQueueCtrl->pCurrentDescr; + + /* Check if there is enough resources to send the packet */ + if(pQueueCtrl->resource == 0) + return MV_NO_RESOURCE; + + pTxCurrDesc->byteCnt = pBufInfo->dataSize; + + /* Flash Buffer */ + if(pPktInfo->pktSize != 0) + { +#ifdef MV_NETBSD + pTxCurrDesc->bufPtr = pBufInfo->bufPhysAddr; + ETH_PACKET_CACHE_FLUSH(pBufInfo->bufVirtPtr, pPktInfo->pktSize); +#else + pTxCurrDesc->bufPtr = ETH_PACKET_CACHE_FLUSH(pBufInfo->bufVirtPtr, pPktInfo->pktSize); +#endif + pPktInfo->pktSize = 0; + } + else + pTxCurrDesc->bufPtr = pBufInfo->bufPhysAddr; + + pTxCurrDesc->returnInfo = (MV_ULONG)pPktInfo; + + /* There is only one buffer in the packet */ + /* The OSG might set some bits for checksum offload, so add them to first descriptor */ + pTxCurrDesc->cmdSts = pPktInfo->status | + ETH_BUFFER_OWNED_BY_DMA | + ETH_TX_GENERATE_CRC_MASK | + ETH_TX_ENABLE_INTERRUPT_MASK | + ETH_TX_ZERO_PADDING_MASK | + ETH_TX_FIRST_DESC_MASK | + ETH_TX_LAST_DESC_MASK; + + ETH_DESCR_FLUSH_INV(pPortCtrl, pTxCurrDesc); + + pQueueCtrl->resource--; + pQueueCtrl->pCurrentDescr = TX_NEXT_DESC_PTR(pTxCurrDesc, pQueueCtrl); + + /* Apply send command */ + MV_REG_VALUE(ETH_TX_QUEUE_COMMAND_REG(portNo)) = pPortCtrl->portTxQueueCmdReg; + + return MV_OK; +} + + +/******************************************************************************* +* mvEthPortSgTx - Send an Ethernet packet +* +* DESCRIPTION: +* This routine send a given packet described by pBufInfo parameter. It +* supports transmitting of a packet spaned over multiple buffers. +* +* INPUT: +* void* pEthPortHndl - Ethernet Port handler. +* int txQueue - Number of Tx queue. +* MV_PKT_INFO *pPktInfo - User packet to send. +* +* RETURN: +* MV_NO_RESOURCE - No enough resources to send this packet. +* MV_ERROR - Unexpected Fatal error. +* MV_OK - Packet send successfully. +* +*******************************************************************************/ +static INLINE MV_STATUS mvEthPortSgTx(void* pEthPortHndl, int txQueue, MV_PKT_INFO* pPktInfo) +{ + ETH_TX_DESC* pTxFirstDesc; + ETH_TX_DESC* pTxCurrDesc; + ETH_PORT_CTRL* pPortCtrl = (ETH_PORT_CTRL*)pEthPortHndl; + ETH_QUEUE_CTRL* pQueueCtrl; + int portNo, bufCount; + MV_BUF_INFO* pBufInfo = pPktInfo->pFrags; + MV_U8* pTxBuf; + +#ifdef ETH_DEBUG + if(pPortCtrl->portState != MV_ACTIVE) + return MV_BAD_STATE; +#endif /* ETH_DEBUG */ + + portNo = pPortCtrl->portNo; + pQueueCtrl = &pPortCtrl->txQueue[txQueue]; + + /* Get the Tx Desc ring indexes */ + pTxCurrDesc = pQueueCtrl->pCurrentDescr; + + /* Check if there is enough resources to send the packet */ + if(pQueueCtrl->resource < pPktInfo->numFrags) + return MV_NO_RESOURCE; + + /* Remember first desc */ + pTxFirstDesc = pTxCurrDesc; + + bufCount = 0; + while(MV_TRUE) + { + if(pBufInfo[bufCount].dataSize <= MIN_TX_BUFF_LOAD) + { + /* Buffers with a payload smaller than MIN_TX_BUFF_LOAD (8 bytes) must be aligned */ + /* to 64-bit boundary. Two options here: */ + /* 1) Usually, copy the payload to the reserved 8 bytes inside descriptor. */ + /* 2) In the Half duplex workaround, the reserved 8 bytes inside descriptor are used */ + /* as a pointer to the aligned buffer, copy the small payload to this buffer. */ + pTxBuf = ((MV_U8*)pTxCurrDesc)+TX_BUF_OFFSET_IN_DESC; + mvOsBCopy(pBufInfo[bufCount].bufVirtPtr, pTxBuf, pBufInfo[bufCount].dataSize); + pTxCurrDesc->bufPtr = ethDescVirtToPhy(pQueueCtrl, pTxBuf); + } + else + { + /* Flash Buffer */ +#ifdef MV_NETBSD + pTxCurrDesc->bufPtr = pBufInfo[bufCount].bufPhysAddr; + ETH_PACKET_CACHE_FLUSH(pBufInfo[bufCount].bufVirtPtr, pBufInfo[bufCount].dataSize); +#else + pTxCurrDesc->bufPtr = ETH_PACKET_CACHE_FLUSH(pBufInfo[bufCount].bufVirtPtr, pBufInfo[bufCount].dataSize); +#endif + } + + pTxCurrDesc->byteCnt = pBufInfo[bufCount].dataSize; + bufCount++; + + if(bufCount >= pPktInfo->numFrags) + break; + + if(bufCount > 1) + { + /* There is middle buffer of the packet Not First and Not Last */ + pTxCurrDesc->cmdSts = ETH_BUFFER_OWNED_BY_DMA; + ETH_DESCR_FLUSH_INV(pPortCtrl, pTxCurrDesc); + } + /* Go to next descriptor and next buffer */ + pTxCurrDesc = TX_NEXT_DESC_PTR(pTxCurrDesc, pQueueCtrl); + } + /* Set last desc with DMA ownership and interrupt enable. */ + pTxCurrDesc->returnInfo = (MV_ULONG)pPktInfo; + if(bufCount == 1) + { + /* There is only one buffer in the packet */ + /* The OSG might set some bits for checksum offload, so add them to first descriptor */ + pTxCurrDesc->cmdSts = pPktInfo->status | + ETH_BUFFER_OWNED_BY_DMA | + ETH_TX_GENERATE_CRC_MASK | + ETH_TX_ENABLE_INTERRUPT_MASK | + ETH_TX_ZERO_PADDING_MASK | + ETH_TX_FIRST_DESC_MASK | + ETH_TX_LAST_DESC_MASK; + + ETH_DESCR_FLUSH_INV(pPortCtrl, pTxCurrDesc); + } + else + { + /* Last but not First */ + pTxCurrDesc->cmdSts = ETH_BUFFER_OWNED_BY_DMA | + ETH_TX_ENABLE_INTERRUPT_MASK | + ETH_TX_ZERO_PADDING_MASK | + ETH_TX_LAST_DESC_MASK; + + ETH_DESCR_FLUSH_INV(pPortCtrl, pTxCurrDesc); + + /* Update First when more than one buffer in the packet */ + /* The OSG might set some bits for checksum offload, so add them to first descriptor */ + pTxFirstDesc->cmdSts = pPktInfo->status | + ETH_BUFFER_OWNED_BY_DMA | + ETH_TX_GENERATE_CRC_MASK | + ETH_TX_FIRST_DESC_MASK; + + ETH_DESCR_FLUSH_INV(pPortCtrl, pTxFirstDesc); + } + /* Update txQueue state */ + pQueueCtrl->resource -= bufCount; + pQueueCtrl->pCurrentDescr = TX_NEXT_DESC_PTR(pTxCurrDesc, pQueueCtrl); + + /* Apply send command */ + MV_REG_VALUE(ETH_TX_QUEUE_COMMAND_REG(portNo)) = pPortCtrl->portTxQueueCmdReg; + + return MV_OK; +} + +/******************************************************************************* +* mvEthPortTxDone - Free all used Tx descriptors and mBlks. +* +* DESCRIPTION: +* This routine returns the transmitted packet information to the caller. +* +* INPUT: +* void* pEthPortHndl - Ethernet Port handler. +* int txQueue - Number of Tx queue. +* +* OUTPUT: +* MV_PKT_INFO *pPktInfo - Pointer to packet was sent. +* +* RETURN: +* MV_NOT_FOUND - No transmitted packets to return. Transmit in progress. +* MV_EMPTY - No transmitted packets to return. TX Queue is empty. +* MV_ERROR - Unexpected Fatal error. +* MV_OK - There is transmitted packet in the queue, +* 'pPktInfo' filled with relevant information. +* +*******************************************************************************/ +static INLINE MV_PKT_INFO* mvEthPortTxDone(void* pEthPortHndl, int txQueue) +{ + ETH_TX_DESC* pTxCurrDesc; + ETH_TX_DESC* pTxUsedDesc; + ETH_QUEUE_CTRL* pQueueCtrl; + ETH_PORT_CTRL* pPortCtrl = (ETH_PORT_CTRL*)pEthPortHndl; + MV_PKT_INFO* pPktInfo; + MV_U32 commandStatus; + + pQueueCtrl = &pPortCtrl->txQueue[txQueue]; + + pTxUsedDesc = pQueueCtrl->pUsedDescr; + pTxCurrDesc = pQueueCtrl->pCurrentDescr; + + while(MV_TRUE) + { + /* No more used descriptors */ + commandStatus = pTxUsedDesc->cmdSts; + if (commandStatus & (ETH_BUFFER_OWNED_BY_DMA)) + { + ETH_DESCR_INV(pPortCtrl, pTxUsedDesc); + return NULL; + } + if( (pTxUsedDesc == pTxCurrDesc) && + (pQueueCtrl->resource != 0) ) + { + return NULL; + } + pQueueCtrl->resource++; + pQueueCtrl->pUsedDescr = TX_NEXT_DESC_PTR(pTxUsedDesc, pQueueCtrl); + if(commandStatus & (ETH_TX_LAST_DESC_MASK)) + { + pPktInfo = (MV_PKT_INFO*)pTxUsedDesc->returnInfo; + pPktInfo->status = commandStatus; + return pPktInfo; + } + pTxUsedDesc = pQueueCtrl->pUsedDescr; + } +} + +/******************************************************************************* +* mvEthPortRx - Get new received packets from Rx queue. +* +* DESCRIPTION: +* This routine returns the received data to the caller. There is no +* data copying during routine operation. All information is returned +* using pointer to packet information struct passed from the caller. +* +* INPUT: +* void* pEthPortHndl - Ethernet Port handler. +* int rxQueue - Number of Rx queue. +* +* OUTPUT: +* MV_PKT_INFO *pPktInfo - Pointer to received packet. +* +* RETURN: +* MV_NO_RESOURCE - No free resources in RX queue. +* MV_ERROR - Unexpected Fatal error. +* MV_OK - New packet received and 'pBufInfo' structure filled +* with relevant information. +* +*******************************************************************************/ +static INLINE MV_PKT_INFO* mvEthPortRx(void* pEthPortHndl, int rxQueue) +{ + ETH_RX_DESC *pRxCurrDesc; + MV_U32 commandStatus; + ETH_PORT_CTRL* pPortCtrl = (ETH_PORT_CTRL*)pEthPortHndl; + ETH_QUEUE_CTRL* pQueueCtrl; + MV_PKT_INFO* pPktInfo; + + pQueueCtrl = &(pPortCtrl->rxQueue[rxQueue]); + + /* Check resources */ + if(pQueueCtrl->resource == 0) + { + mvOsPrintf("ethPortRx: no more resources\n"); + return NULL; + } + while(MV_TRUE) + { + /* Get the Rx Desc ring 'curr and 'used' indexes */ + pRxCurrDesc = pQueueCtrl->pCurrentDescr; + + commandStatus = pRxCurrDesc->cmdSts; + if (commandStatus & (ETH_BUFFER_OWNED_BY_DMA)) + { + /* Nothing to receive... */ + ETH_DESCR_INV(pPortCtrl, pRxCurrDesc); + return NULL; + } + + /* Valid RX only if FIRST and LAST bits are set */ + if( (commandStatus & (ETH_RX_LAST_DESC_MASK | ETH_RX_FIRST_DESC_MASK)) == + (ETH_RX_LAST_DESC_MASK | ETH_RX_FIRST_DESC_MASK) ) + { + pPktInfo = (MV_PKT_INFO*)pRxCurrDesc->returnInfo; + pPktInfo->pFrags->dataSize = pRxCurrDesc->byteCnt - 4; + pPktInfo->status = commandStatus; + pPktInfo->fragIP = pRxCurrDesc->bufSize & ETH_RX_IP_FRAGMENTED_FRAME_MASK; + + pQueueCtrl->resource--; + /* Update 'curr' in data structure */ + pQueueCtrl->pCurrentDescr = RX_NEXT_DESC_PTR(pRxCurrDesc, pQueueCtrl); + +#ifdef INCLUDE_SYNC_BARR + mvCpuIfSyncBarr(DRAM_TARGET); +#endif + return pPktInfo; + } + else + { + ETH_RX_DESC* pRxUsedDesc = pQueueCtrl->pUsedDescr; + +#ifdef ETH_DEBUG + mvOsPrintf("ethDrv: Unexpected Jumbo frame: " + "status=0x%08x, byteCnt=%d, pData=0x%x\n", + commandStatus, pRxCurrDesc->byteCnt, pRxCurrDesc->bufPtr); +#endif /* ETH_DEBUG */ + + /* move buffer from pCurrentDescr position to pUsedDescr position */ + pRxUsedDesc->bufPtr = pRxCurrDesc->bufPtr; + pRxUsedDesc->returnInfo = pRxCurrDesc->returnInfo; + pRxUsedDesc->bufSize = pRxCurrDesc->bufSize & ETH_RX_BUFFER_MASK; + + /* Return the descriptor to DMA ownership */ + pRxUsedDesc->cmdSts = ETH_BUFFER_OWNED_BY_DMA | + ETH_RX_ENABLE_INTERRUPT_MASK; + + /* Flush descriptor and CPU pipe */ + ETH_DESCR_FLUSH_INV(pPortCtrl, pRxUsedDesc); + + /* Move the used descriptor pointer to the next descriptor */ + pQueueCtrl->pUsedDescr = RX_NEXT_DESC_PTR(pRxUsedDesc, pQueueCtrl); + pQueueCtrl->pCurrentDescr = RX_NEXT_DESC_PTR(pRxCurrDesc, pQueueCtrl); + } + } +} + +/******************************************************************************* +* mvEthPortRxDone - Returns a Rx buffer back to the Rx ring. +* +* DESCRIPTION: +* This routine returns a Rx buffer back to the Rx ring. +* +* INPUT: +* void* pEthPortHndl - Ethernet Port handler. +* int rxQueue - Number of Rx queue. +* MV_PKT_INFO *pPktInfo - Pointer to received packet. +* +* RETURN: +* MV_ERROR - Unexpected Fatal error. +* MV_OUT_OF_RANGE - RX queue is already FULL, so this buffer can't be +* returned to this queue. +* MV_FULL - Buffer returned successfully and RX queue became full. +* More buffers should not be returned at the time. +* MV_OK - Buffer returned successfully and there are more free +* places in the queue. +* +*******************************************************************************/ +static INLINE MV_STATUS mvEthPortRxDone(void* pEthPortHndl, int rxQueue, MV_PKT_INFO *pPktInfo) +{ + ETH_RX_DESC* pRxUsedDesc; + ETH_QUEUE_CTRL* pQueueCtrl; + ETH_PORT_CTRL* pPortCtrl = (ETH_PORT_CTRL*)pEthPortHndl; + + pQueueCtrl = &pPortCtrl->rxQueue[rxQueue]; + + /* Get 'used' Rx descriptor */ + pRxUsedDesc = pQueueCtrl->pUsedDescr; + + /* Check that ring is not FULL */ + if( (pQueueCtrl->pUsedDescr == pQueueCtrl->pCurrentDescr) && + (pQueueCtrl->resource != 0) ) + { + mvOsPrintf("%s %d: out of range Error resource=%d, curr=%p, used=%p\n", + __FUNCTION__, pPortCtrl->portNo, pQueueCtrl->resource, + pQueueCtrl->pCurrentDescr, pQueueCtrl->pUsedDescr); + return MV_OUT_OF_RANGE; + } + + pRxUsedDesc->bufPtr = pPktInfo->pFrags->bufPhysAddr; + pRxUsedDesc->returnInfo = (MV_ULONG)pPktInfo; + pRxUsedDesc->bufSize = pPktInfo->pFrags->bufSize & ETH_RX_BUFFER_MASK; + + /* Invalidate data buffer accordingly with pktSize */ + if(pPktInfo->pktSize != 0) + { + ETH_PACKET_CACHE_INVALIDATE(pPktInfo->pFrags->bufVirtPtr, pPktInfo->pktSize); + pPktInfo->pktSize = 0; + } + + /* Return the descriptor to DMA ownership */ + pRxUsedDesc->cmdSts = ETH_BUFFER_OWNED_BY_DMA | ETH_RX_ENABLE_INTERRUPT_MASK; + + /* Flush descriptor and CPU pipe */ + ETH_DESCR_FLUSH_INV(pPortCtrl, pRxUsedDesc); + + pQueueCtrl->resource++; + + /* Move the used descriptor pointer to the next descriptor */ + pQueueCtrl->pUsedDescr = RX_NEXT_DESC_PTR(pRxUsedDesc, pQueueCtrl); + + /* If ring became Full return MV_FULL */ + if(pQueueCtrl->pUsedDescr == pQueueCtrl->pCurrentDescr) + return MV_FULL; + + return MV_OK; +} + + +#endif /* __mvEthGbe_h__ */ + + diff --git a/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/mv_hal/eth/gbe/mvEthRegs.h b/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/mv_hal/eth/gbe/mvEthRegs.h new file mode 100644 index 0000000000..7b9f0520fb --- /dev/null +++ b/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/mv_hal/eth/gbe/mvEthRegs.h @@ -0,0 +1,700 @@ +/******************************************************************************* +Copyright (C) Marvell International Ltd. and its affiliates + +This software file (the "File") is owned and distributed by Marvell +International Ltd. and/or its affiliates ("Marvell") under the following +alternative licensing terms. Once you have made an election to distribute the +File under one of the following license alternatives, please (i) delete this +introductory statement regarding license alternatives, (ii) delete the two +license alternatives that you have not elected to use and (iii) preserve the +Marvell copyright notice above. + +******************************************************************************** +Marvell Commercial License Option + +If you received this File from Marvell and you have entered into a commercial +license agreement (a "Commercial License") with Marvell, the File is licensed +to you under the terms of the applicable Commercial License. + +******************************************************************************** +Marvell GPL License Option + +If you received this File from Marvell, you may opt to use, redistribute and/or +modify this File in accordance with the terms and conditions of the General +Public License Version 2, June 1991 (the "GPL License"), a copy of which is +available along with the File in the license.txt file or by writing to the Free +Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or +on the worldwide web at http://www.gnu.org/licenses/gpl.txt. + +THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED +WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY +DISCLAIMED. The GPL License provides additional details about this warranty +disclaimer. +******************************************************************************** +Marvell BSD License Option + +If you received this File from Marvell, you may opt to use, redistribute and/or +modify this File under the following licensing terms. +Redistribution and use in source and binary forms, with or without modification, +are permitted provided that the following conditions are met: + + * Redistributions of source code must retain the above copyright notice, + this list of conditions and the following disclaimer. + + * Redistributions in binary form must reproduce the above copyright + notice, this list of conditions and the following disclaimer in the + documentation and/or other materials provided with the distribution. + + * Neither the name of Marvell nor the names of its contributors may be + used to endorse or promote products derived from this software without + specific prior written permission. + +THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND +ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED +WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE +DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR +ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES +(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; +LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON +ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS +SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + +*******************************************************************************/ + + +#ifndef __INCmvEthRegsh +#define __INCmvEthRegsh + +#ifdef __cplusplus +extern "C" { +#endif /* __cplusplus */ + +#include "ctrlEnv/mvCtrlEnvSpec.h" + +/****************************************/ +/* Ethernet Unit Registers */ +/****************************************/ +#define ETH_REG_BASE MV_ETH_REG_BASE + +#define ETH_PHY_ADDR_REG(port) (ETH_REG_BASE(port) + 0x000) +#define ETH_SMI_REG(port) (ETH_REG_BASE(port) + 0x004) +#define ETH_UNIT_DEF_ADDR_REG(port) (ETH_REG_BASE(port) + 0x008) +#define ETH_UNIT_DEF_ID_REG(port) (ETH_REG_BASE(port) + 0x00c) +#define ETH_UNIT_RESERVED(port) (ETH_REG_BASE(port) + 0x014) +#define ETH_UNIT_INTR_CAUSE_REG(port) (ETH_REG_BASE(port) + 0x080) +#define ETH_UNIT_INTR_MASK_REG(port) (ETH_REG_BASE(port) + 0x084) + + +#define ETH_UNIT_ERROR_ADDR_REG(port) (ETH_REG_BASE(port) + 0x094) +#define ETH_UNIT_INT_ADDR_ERROR_REG(port) (ETH_REG_BASE(port) + 0x098) +#define ETH_UNIT_CONTROL_REG(port) (ETH_REG_BASE(port) + 0x0B0) + +#define ETH_PORT_CONFIG_REG(port) (ETH_REG_BASE(port) + 0x400) +#define ETH_PORT_CONFIG_EXTEND_REG(port) (ETH_REG_BASE(port) + 0x404) +#define ETH_MII_SERIAL_PARAM_REG(port) (ETH_REG_BASE(port) + 0x408) +#define ETH_GMII_SERIAL_PARAM_REG(port) (ETH_REG_BASE(port) + 0x40c) +#define ETH_VLAN_ETHER_TYPE_REG(port) (ETH_REG_BASE(port) + 0x410) +#define ETH_MAC_ADDR_LOW_REG(port) (ETH_REG_BASE(port) + 0x414) +#define ETH_MAC_ADDR_HIGH_REG(port) (ETH_REG_BASE(port) + 0x418) +#define ETH_SDMA_CONFIG_REG(port) (ETH_REG_BASE(port) + 0x41c) +#define ETH_DIFF_SERV_PRIO_REG(port, code) (ETH_REG_BASE(port) + 0x420 + ((code)<<2)) +#define ETH_PORT_SERIAL_CTRL_REG(port) (ETH_REG_BASE(port) + 0x43c) +#define ETH_VLAN_TAG_TO_PRIO_REG(port) (ETH_REG_BASE(port) + 0x440) +#define ETH_PORT_STATUS_REG(port) (ETH_REG_BASE(port) + 0x444) + +#define ETH_RX_QUEUE_COMMAND_REG(port) (ETH_REG_BASE(port) + 0x680) +#define ETH_TX_QUEUE_COMMAND_REG(port) (ETH_REG_BASE(port) + 0x448) + +#define ETH_PORT_SERIAL_CTRL_1_REG(port) (ETH_REG_BASE(port) + 0x44c) +#define ETH_PORT_STATUS_1_REG(port) (ETH_REG_BASE(port) + 0x450) +#define ETH_PORT_MARVELL_HEADER_REG(port) (ETH_REG_BASE(port) + 0x454) +#define ETH_PORT_FIFO_PARAMS_REG(port) (ETH_REG_BASE(port) + 0x458) +#define ETH_MAX_TOKEN_BUCKET_SIZE_REG(port) (ETH_REG_BASE(port) + 0x45c) +#define ETH_INTR_CAUSE_REG(port) (ETH_REG_BASE(port) + 0x460) +#define ETH_INTR_CAUSE_EXT_REG(port) (ETH_REG_BASE(port) + 0x464) +#define ETH_INTR_MASK_REG(port) (ETH_REG_BASE(port) + 0x468) +#define ETH_INTR_MASK_EXT_REG(port) (ETH_REG_BASE(port) + 0x46c) +#define ETH_TX_FIFO_URGENT_THRESH_REG(port) (ETH_REG_BASE(port) + 0x474) +#define ETH_RX_MINIMAL_FRAME_SIZE_REG(port) (ETH_REG_BASE(port) + 0x47c) +#define ETH_RX_DISCARD_PKTS_CNTR_REG(port) (ETH_REG_BASE(port) + 0x484) +#define ETH_RX_OVERRUN_PKTS_CNTR_REG(port) (ETH_REG_BASE(port) + 0x488) +#define ETH_INTERNAL_ADDR_ERROR_REG(port) (ETH_REG_BASE(port) + 0x494) +#define ETH_TX_FIXED_PRIO_CFG_REG(port) (ETH_REG_BASE(port) + 0x4dc) +#define ETH_TX_TOKEN_RATE_CFG_REG(port) (ETH_REG_BASE(port) + 0x4e0) +#define ETH_TX_QUEUE_COMMAND1_REG(port) (ETH_REG_BASE(port) + 0x4e4) +#define ETH_MAX_TRANSMIT_UNIT_REG(port) (ETH_REG_BASE(port) + 0x4e8) +#define ETH_TX_TOKEN_BUCKET_SIZE_REG(port) (ETH_REG_BASE(port) + 0x4ec) +#define ETH_TX_TOKEN_BUCKET_COUNT_REG(port) (ETH_REG_BASE(port) + 0x780) +#define ETH_RX_DESCR_STAT_CMD_REG(port, q) (ETH_REG_BASE(port) + 0x600 + ((q)<<4)) +#define ETH_RX_BYTE_COUNT_REG(port, q) (ETH_REG_BASE(port) + 0x604 + ((q)<<4)) +#define ETH_RX_BUF_PTR_REG(port, q) (ETH_REG_BASE(port) + 0x608 + ((q)<<4)) +#define ETH_RX_CUR_DESC_PTR_REG(port, q) (ETH_REG_BASE(port) + 0x60c + ((q)<<4)) +#define ETH_TX_CUR_DESC_PTR_REG(port, q) (ETH_REG_BASE(port) + 0x6c0 + ((q)<<2)) + +#define ETH_TXQ_TOKEN_COUNT_REG(port, q) (ETH_REG_BASE(port) + 0x700 + ((q)<<4)) +#define ETH_TXQ_TOKEN_CFG_REG(port, q) (ETH_REG_BASE(port) + 0x704 + ((q)<<4)) +#define ETH_TXQ_ARBITER_CFG_REG(port, q) (ETH_REG_BASE(port) + 0x708 + ((q)<<4)) + +#if (MV_ETH_VERSION >= 4) +#define ETH_TXQ_CMD_1_REG(port) (ETH_REG_BASE(port) + 0x4E4) +#define ETH_EJP_TX_HI_IPG_REG(port) (ETH_REG_BASE(port) + 0x7A8) +#define ETH_EJP_TX_LO_IPG_REG(port) (ETH_REG_BASE(port) + 0x7B8) +#define ETH_EJP_HI_TKN_LO_PKT_REG(port) (ETH_REG_BASE(port) + 0x7C0) +#define ETH_EJP_HI_TKN_ASYNC_PKT_REG(port) (ETH_REG_BASE(port) + 0x7C4) +#define ETH_EJP_LO_TKN_ASYNC_PKT_REG(port) (ETH_REG_BASE(port) + 0x7C8) +#define ETH_EJP_TX_SPEED_REG(port) (ETH_REG_BASE(port) + 0x7D0) +#endif /* MV_ETH_VERSION >= 4 */ + +#define ETH_MIB_COUNTERS_BASE(port) (ETH_REG_BASE(port) + 0x1000) +#define ETH_DA_FILTER_SPEC_MCAST_BASE(port) (ETH_REG_BASE(port) + 0x1400) +#define ETH_DA_FILTER_OTH_MCAST_BASE(port) (ETH_REG_BASE(port) + 0x1500) +#define ETH_DA_FILTER_UCAST_BASE(port) (ETH_REG_BASE(port) + 0x1600) + +/* Phy address register definitions */ +#define ETH_PHY_ADDR_OFFS 0 +#define ETH_PHY_ADDR_MASK (0x1f <= 4) +#define ETH_TX_EJP_RESET_BIT 0 +#define ETH_TX_EJP_RESET_MASK (1 << ETH_TX_EJP_RESET_BIT) + +#define ETH_TX_EJP_ENABLE_BIT 2 +#define ETH_TX_EJP_ENABLE_MASK (1 << ETH_TX_EJP_ENABLE_BIT) + +#define ETH_TX_LEGACY_WRR_BIT 3 +#define ETH_TX_LEGACY_WRR_MASK (1 << ETH_TX_LEGACY_WRR_BIT) +#endif /* (MV_ETH_VERSION >= 4) */ + +/***** BITs of Ethernet Port Status reg (PSR) *****/ +#define ETH_LINK_UP_BIT 1 +#define ETH_LINK_UP_MASK (1<= 4) +MV_STATUS mvEthEjpModeSet(void* pPortHandle, int mode); +#endif /* (MV_ETH_VERSION >= 4) */ + +void mvEthStatusGet(void* pPortHandle, MV_ETH_PORT_STATUS* pStatus); + +/* Marvell Header control */ +MV_STATUS mvEthHeaderModeSet(void* pPortHandle, MV_ETH_HEADER_MODE headerMode); + +/* PHY routines */ +void mvEthPhyAddrSet(void* pPortHandle, int phyAddr); +int mvEthPhyAddrGet(void* pPortHandle); + +/* Power management routines */ +void mvEthPortPowerDown(int port); +void mvEthPortPowerUp(int port); + +/******************** ETH PRIVATE ************************/ + +/*#define UNCACHED_TX_BUFFERS*/ +/*#define UNCACHED_RX_BUFFERS*/ + + +/* Port attributes */ +/* Size of a Tx/Rx descriptor used in chain list data structure */ +#define ETH_RX_DESC_ALIGNED_SIZE 32 +#define ETH_TX_DESC_ALIGNED_SIZE 32 + +#define TX_DISABLE_TIMEOUT_MSEC 1000 +#define RX_DISABLE_TIMEOUT_MSEC 1000 +#define TX_FIFO_EMPTY_TIMEOUT_MSEC 10000 +#define PORT_DISABLE_WAIT_TCLOCKS 5000 + +/* Macros that save access to desc in order to find next desc pointer */ +#define RX_NEXT_DESC_PTR(pRxDescr, pQueueCtrl) \ + ((pRxDescr) == (pQueueCtrl)->pLastDescr) ? \ + (ETH_RX_DESC*)((pQueueCtrl)->pFirstDescr) : \ + (ETH_RX_DESC*)(((MV_ULONG)(pRxDescr)) + ETH_RX_DESC_ALIGNED_SIZE) + +#define TX_NEXT_DESC_PTR(pTxDescr, pQueueCtrl) \ + ((pTxDescr) == (pQueueCtrl)->pLastDescr) ? \ + (ETH_TX_DESC*)((pQueueCtrl)->pFirstDescr) : \ + (ETH_TX_DESC*)(((MV_ULONG)(pTxDescr)) + ETH_TX_DESC_ALIGNED_SIZE) + +#define RX_PREV_DESC_PTR(pRxDescr, pQueueCtrl) \ + ((pRxDescr) == (pQueueCtrl)->pFirstDescr) ? \ + (ETH_RX_DESC*)((pQueueCtrl)->pLastDescr) : \ + (ETH_RX_DESC*)(((MV_ULONG)(pRxDescr)) - ETH_RX_DESC_ALIGNED_SIZE) + +#define TX_PREV_DESC_PTR(pTxDescr, pQueueCtrl) \ + ((pTxDescr) == (pQueueCtrl)->pFirstDescr) ? \ + (ETH_TX_DESC*)((pQueueCtrl)->pLastDescr) : \ + (ETH_TX_DESC*)(((MV_ULONG)(pTxDescr)) - ETH_TX_DESC_ALIGNED_SIZE) + + +/* Queue specific information */ +typedef struct +{ + void* pFirstDescr; + void* pLastDescr; + void* pCurrentDescr; + void* pUsedDescr; + int resource; + MV_BUF_INFO descBuf; +} ETH_QUEUE_CTRL; + + +/* Ethernet port specific infomation */ +typedef struct _ethPortCtrl +{ + int portNo; + ETH_QUEUE_CTRL rxQueue[MV_ETH_RX_Q_NUM]; /* Rx ring resource */ + ETH_QUEUE_CTRL txQueue[MV_ETH_TX_Q_NUM]; /* Tx ring resource */ + + MV_ETH_PORT_CFG portConfig; + MV_ETH_RX_Q_CFG rxQueueConfig[MV_ETH_RX_Q_NUM]; + MV_ETH_TX_Q_CFG txQueueConfig[MV_ETH_TX_Q_NUM]; + + /* Register images - For DP */ + MV_U32 portTxQueueCmdReg; /* Port active Tx queues summary */ + MV_U32 portRxQueueCmdReg; /* Port active Rx queues summary */ + + MV_STATE portState; + + MV_U8 mcastCount[256]; + MV_U32* hashPtr; + void *osHandle; +} ETH_PORT_CTRL; + +/************** MACROs ****************/ + +/* MACROs to Flush / Invalidate TX / RX Buffers */ +#if (ETHER_DRAM_COHER == MV_CACHE_COHER_SW) && !defined(UNCACHED_TX_BUFFERS) +# define ETH_PACKET_CACHE_FLUSH(pAddr, size) \ + mvOsCacheClear(NULL, (pAddr), (size)); \ + /*CPU_PIPE_FLUSH;*/ +#else +# define ETH_PACKET_CACHE_FLUSH(pAddr, size) \ + mvOsIoVirtToPhy(NULL, (pAddr)); +#endif /* ETHER_DRAM_COHER == MV_CACHE_COHER_SW */ + +#if ( (ETHER_DRAM_COHER == MV_CACHE_COHER_SW) && !defined(UNCACHED_RX_BUFFERS) ) +# define ETH_PACKET_CACHE_INVALIDATE(pAddr, size) \ + mvOsCacheInvalidate (NULL, (pAddr), (size)); \ + /*CPU_PIPE_FLUSH;*/ +#else +# define ETH_PACKET_CACHE_INVALIDATE(pAddr, size) +#endif /* ETHER_DRAM_COHER == MV_CACHE_COHER_SW && !UNCACHED_RX_BUFFERS */ + +#ifdef ETH_DESCR_UNCACHED + +#define ETH_DESCR_FLUSH_INV(pPortCtrl, pDescr) +#define ETH_DESCR_INV(pPortCtrl, pDescr) + +#else + +#define ETH_DESCR_FLUSH_INV(pPortCtrl, pDescr) \ + mvOsCacheLineFlushInv(pPortCtrl->osHandle, (MV_ULONG)(pDescr)) + +#define ETH_DESCR_INV(pPortCtrl, pDescr) \ + mvOsCacheLineInv(pPortCtrl->osHandle, (MV_ULONG)(pDescr)) + +#endif /* ETH_DESCR_UNCACHED */ + +#include "eth/gbe/mvEthGbe.h" + +#endif /* __mvEth_h__ */ + + diff --git a/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/mv_hal/gpp/mvGpp.c b/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/mv_hal/gpp/mvGpp.c new file mode 100644 index 0000000000..889d4d9e9e --- /dev/null +++ b/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/mv_hal/gpp/mvGpp.c @@ -0,0 +1,362 @@ +/******************************************************************************* +Copyright (C) Marvell International Ltd. and its affiliates + +This software file (the "File") is owned and distributed by Marvell +International Ltd. and/or its affiliates ("Marvell") under the following +alternative licensing terms. Once you have made an election to distribute the +File under one of the following license alternatives, please (i) delete this +introductory statement regarding license alternatives, (ii) delete the two +license alternatives that you have not elected to use and (iii) preserve the +Marvell copyright notice above. + +******************************************************************************** +Marvell Commercial License Option + +If you received this File from Marvell and you have entered into a commercial +license agreement (a "Commercial License") with Marvell, the File is licensed +to you under the terms of the applicable Commercial License. + +******************************************************************************** +Marvell GPL License Option + +If you received this File from Marvell, you may opt to use, redistribute and/or +modify this File in accordance with the terms and conditions of the General +Public License Version 2, June 1991 (the "GPL License"), a copy of which is +available along with the File in the license.txt file or by writing to the Free +Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or +on the worldwide web at http://www.gnu.org/licenses/gpl.txt. + +THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED +WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY +DISCLAIMED. The GPL License provides additional details about this warranty +disclaimer. +******************************************************************************** +Marvell BSD License Option + +If you received this File from Marvell, you may opt to use, redistribute and/or +modify this File under the following licensing terms. +Redistribution and use in source and binary forms, with or without modification, +are permitted provided that the following conditions are met: + + * Redistributions of source code must retain the above copyright notice, + this list of conditions and the following disclaimer. + + * Redistributions in binary form must reproduce the above copyright + notice, this list of conditions and the following disclaimer in the + documentation and/or other materials provided with the distribution. + + * Neither the name of Marvell nor the names of its contributors may be + used to endorse or promote products derived from this software without + specific prior written permission. + +THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND +ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED +WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE +DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR +ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES +(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; +LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON +ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS +SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + +*******************************************************************************/ + +#include "gpp/mvGpp.h" +#include "ctrlEnv/mvCtrlEnvLib.h" +/* defines */ +#ifdef MV_DEBUG + #define DB(x) x +#else + #define DB(x) +#endif + +static MV_VOID gppRegSet(MV_U32 group, MV_U32 regOffs,MV_U32 mask,MV_U32 value); + +/******************************************************************************* +* mvGppTypeSet - Enable a GPP (OUT) pin +* +* DESCRIPTION: +* +* INPUT: +* group - GPP group number +* mask - 32bit mask value. Each set bit in the mask means that the type +* of corresponding GPP will be set. Other GPPs are ignored. +* value - 32bit value that describes GPP type per pin. +* +* OUTPUT: +* None. +* +* EXAMPLE: +* Set GPP8 to input and GPP15 to output. +* mvGppTypeSet(0, (GPP8 | GPP15), +* ((MV_GPP_IN & GPP8) | (MV_GPP_OUT & GPP15)) ); +* +* RETURN: +* None. +* +*******************************************************************************/ +MV_STATUS mvGppTypeSet(MV_U32 group, MV_U32 mask, MV_U32 value) +{ + if (group >= MV_GPP_MAX_GROUP) + { + DB(mvOsPrintf("mvGppTypeSet: ERR. invalid group number \n")); + return MV_BAD_PARAM; + } + + gppRegSet(group, GPP_DATA_OUT_EN_REG(group), mask, value); + + /* Workaround for Erratum FE-MISC-70*/ + if(mvCtrlRevGet()==MV_88F6XXX_A0_REV && (group == 1)) + { + mask &= 0x2; + gppRegSet(0, GPP_DATA_OUT_EN_REG(0), mask, value); + } /*End of WA*/ + + return MV_OK; + +} + +/******************************************************************************* +* mvGppBlinkEn - Set a GPP (IN) Pin list to blink every ~100ms +* +* DESCRIPTION: +* +* INPUT: +* group - GPP group number +* mask - 32bit mask value. Each set bit in the mask means that the type +* of corresponding GPP will be set. Other GPPs are ignored. +* value - 32bit value that describes GPP blink per pin. +* +* OUTPUT: +* None. +* +* EXAMPLE: +* Set GPP8 to be static and GPP15 to be blinking. +* mvGppBlinkEn(0, (GPP8 | GPP15), +* ((MV_GPP_OUT_STATIC & GPP8) | (MV_GPP_OUT_BLINK & GPP15)) ); +* +* RETURN: +* None. +* +*******************************************************************************/ +MV_STATUS mvGppBlinkEn(MV_U32 group, MV_U32 mask, MV_U32 value) +{ + if (group >= MV_GPP_MAX_GROUP) + { + DB(mvOsPrintf("mvGppBlinkEn: ERR. invalid group number \n")); + return MV_BAD_PARAM; + } + + gppRegSet(group, GPP_BLINK_EN_REG(group), mask, value); + + return MV_OK; + +} +/******************************************************************************* +* mvGppPolaritySet - Set a GPP (IN) Pin list Polarity mode +* +* DESCRIPTION: +* +* INPUT: +* group - GPP group number +* mask - 32bit mask value. Each set bit in the mask means that the type +* of corresponding GPP will be set. Other GPPs are ignored. +* value - 32bit value that describes GPP polarity per pin. +* +* OUTPUT: +* None. +* +* EXAMPLE: +* Set GPP8 to the actual pin value and GPP15 to be inverted. +* mvGppPolaritySet(0, (GPP8 | GPP15), +* ((MV_GPP_IN_ORIGIN & GPP8) | (MV_GPP_IN_INVERT & GPP15)) ); +* +* RETURN: +* None. +* +*******************************************************************************/ +MV_STATUS mvGppPolaritySet(MV_U32 group, MV_U32 mask, MV_U32 value) +{ + if (group >= MV_GPP_MAX_GROUP) + { + DB(mvOsPrintf("mvGppPolaritySet: ERR. invalid group number \n")); + return MV_BAD_PARAM; + } + + gppRegSet(group, GPP_DATA_IN_POL_REG(group), mask, value); + + return MV_OK; + +} + +/******************************************************************************* +* mvGppPolarityGet - Get a value of relevant bits from GPP Polarity register. +* +* DESCRIPTION: +* +* INPUT: +* group - GPP group number +* mask - 32bit mask value. Each set bit in the mask means that the +* returned value is valid for it. +* +* OUTPUT: +* None. +* +* EXAMPLE: +* Get GPP8 and GPP15 value. +* mvGppPolarityGet(0, (GPP8 | GPP15)); +* +* RETURN: +* 32bit value that describes GPP polatity mode per pin. +* +*******************************************************************************/ +MV_U32 mvGppPolarityGet(MV_U32 group, MV_U32 mask) +{ + MV_U32 regVal; + + if (group >= MV_GPP_MAX_GROUP) + { + DB(mvOsPrintf("mvGppActiveSet: Error invalid group number \n")); + return MV_ERROR; + } + regVal = MV_REG_READ(GPP_DATA_IN_POL_REG(group)); + + return (regVal & mask); +} + +/******************************************************************************* +* mvGppValueGet - Get a GPP Pin list value. +* +* DESCRIPTION: +* This function get GPP value. +* +* INPUT: +* group - GPP group number +* mask - 32bit mask value. Each set bit in the mask means that the +* returned value is valid for it. +* +* OUTPUT: +* None. +* +* EXAMPLE: +* Get GPP8 and GPP15 value. +* mvGppValueGet(0, (GPP8 | GPP15)); +* +* RETURN: +* 32bit value that describes GPP activity mode per pin. +* +*******************************************************************************/ +MV_U32 mvGppValueGet(MV_U32 group, MV_U32 mask) +{ + MV_U32 gppData; + + gppData = MV_REG_READ(GPP_DATA_IN_REG(group)); + + gppData &= mask; + + return gppData; + +} + +/******************************************************************************* +* mvGppValueSet - Set a GPP Pin list value. +* +* DESCRIPTION: +* This function set value for given GPP pin list. +* +* INPUT: +* group - GPP group number +* mask - 32bit mask value. Each set bit in the mask means that the +* value of corresponding GPP will be set accordingly. Other GPP +* are not affected. +* value - 32bit value that describes GPP value per pin. +* +* OUTPUT: +* None. +* +* EXAMPLE: +* Set GPP8 value of '0' and GPP15 value of '1'. +* mvGppActiveSet(0, (GPP8 | GPP15), ((0 & GPP8) | (GPP15)) ); +* +* RETURN: +* None. +* +*******************************************************************************/ +MV_STATUS mvGppValueSet (MV_U32 group, MV_U32 mask, MV_U32 value) +{ + MV_U32 outEnable, tmp; + MV_U32 i; + + if (group >= MV_GPP_MAX_GROUP) + { + DB(mvOsPrintf("mvGppValueSet: Error invalid group number \n")); + return MV_BAD_PARAM; + } + + /* verify that the gpp pin is configured as output */ + /* Note that in the register out enabled -> bit = '0'. */ + outEnable = ~MV_REG_READ(GPP_DATA_OUT_EN_REG(group)); + + /* Workaround for Erratum FE-MISC-70*/ + if(mvCtrlRevGet()==MV_88F6XXX_A0_REV && (group == 1)) + { + tmp = ~MV_REG_READ(GPP_DATA_OUT_EN_REG(0)); + outEnable &= 0xfffffffd; + outEnable |= (tmp & 0x2); + } /*End of WA*/ + + for (i = 0 ; i < 32 ;i++) + { + if (((mask & (1 << i)) & (outEnable & (1 << i))) != (mask & (1 << i))) + { + mvOsPrintf("mvGppValueSet: Err. An attempt to set output "\ + "value to GPP %d in input mode.\n", i); + return MV_ERROR; + } + } + + gppRegSet(group, GPP_DATA_OUT_REG(group), mask, value); + + return MV_OK; + +} +/******************************************************************************* +* gppRegSet - Set a specific GPP pin on a specific GPP register +* +* DESCRIPTION: +* This function set a specific GPP pin on a specific GPP register +* +* INPUT: +* regOffs - GPP Register offset +* group - GPP group number +* mask - 32bit mask value. Each set bit in the mask means that the +* value of corresponding GPP will be set accordingly. Other GPP +* are not affected. +* value - 32bit value that describes GPP value per pin. +* +* OUTPUT: +* None. +* +* EXAMPLE: +* Set GPP8 value of '0' and GPP15 value of '1'. +* mvGppActiveSet(0, (GPP8 | GPP15), ((0 & GPP8) | (1 & GPP15)) ); +* +* RETURN: +* None. +* +*******************************************************************************/ +static MV_VOID gppRegSet (MV_U32 group, MV_U32 regOffs,MV_U32 mask,MV_U32 value) +{ + MV_U32 gppData; + + gppData = MV_REG_READ(regOffs); + + gppData &= ~mask; + + gppData |= (value & mask); + + MV_REG_WRITE(regOffs, gppData); +} + + diff --git a/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/mv_hal/gpp/mvGpp.h b/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/mv_hal/gpp/mvGpp.h new file mode 100644 index 0000000000..526d324fd3 --- /dev/null +++ b/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/mv_hal/gpp/mvGpp.h @@ -0,0 +1,118 @@ +/******************************************************************************* +Copyright (C) Marvell International Ltd. and its affiliates + +This software file (the "File") is owned and distributed by Marvell +International Ltd. and/or its affiliates ("Marvell") under the following +alternative licensing terms. Once you have made an election to distribute the +File under one of the following license alternatives, please (i) delete this +introductory statement regarding license alternatives, (ii) delete the two +license alternatives that you have not elected to use and (iii) preserve the +Marvell copyright notice above. + +******************************************************************************** +Marvell Commercial License Option + +If you received this File from Marvell and you have entered into a commercial +license agreement (a "Commercial License") with Marvell, the File is licensed +to you under the terms of the applicable Commercial License. + +******************************************************************************** +Marvell GPL License Option + +If you received this File from Marvell, you may opt to use, redistribute and/or +modify this File in accordance with the terms and conditions of the General +Public License Version 2, June 1991 (the "GPL License"), a copy of which is +available along with the File in the license.txt file or by writing to the Free +Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or +on the worldwide web at http://www.gnu.org/licenses/gpl.txt. + +THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED +WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY +DISCLAIMED. The GPL License provides additional details about this warranty +disclaimer. +******************************************************************************** +Marvell BSD License Option + +If you received this File from Marvell, you may opt to use, redistribute and/or +modify this File under the following licensing terms. +Redistribution and use in source and binary forms, with or without modification, +are permitted provided that the following conditions are met: + + * Redistributions of source code must retain the above copyright notice, + this list of conditions and the following disclaimer. + + * Redistributions in binary form must reproduce the above copyright + notice, this list of conditions and the following disclaimer in the + documentation and/or other materials provided with the distribution. + + * Neither the name of Marvell nor the names of its contributors may be + used to endorse or promote products derived from this software without + specific prior written permission. + +THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND +ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED +WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE +DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR +ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES +(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; +LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON +ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS +SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + +*******************************************************************************/ + +#ifndef __INCmvGppH +#define __INCmvGppH + +#include "mvCommon.h" +#include "mvOs.h" +#include "ctrlEnv/mvCtrlEnvSpec.h" +#include "gpp/mvGppRegs.h" + +/* These macros describes the GPP type. Each of the GPPs pins can */ +/* be assigned to act as a general purpose input or output pin. */ +#define MV_GPP_IN 0xFFFFFFFF /* GPP input */ +#define MV_GPP_OUT 0 /* GPP output */ + + +/* These macros describes the GPP Out Enable. */ +#define MV_GPP_OUT_DIS 0xFFFFFFFF /* Out pin disabled*/ +#define MV_GPP_OUT_EN 0 /* Out pin enabled*/ + +/* These macros describes the GPP Out Blinking. */ +/* When set and the corresponding bit in GPIO Data Out Enable Control */ +/* Register is enabled, the GPIO pin blinks every ~100 ms (a period of */ +/* 2^24 TCLK clocks). */ +#define MV_GPP_OUT_BLINK 0xFFFFFFFF /* Out pin blinking*/ +#define MV_GPP_OUT_STATIC 0 /* Out pin static*/ + + +/* These macros describes the GPP Polarity. */ +/* When set to 1 GPIO Data In Register reflects the inverted value of the */ +/* corresponding pin. */ + +#define MV_GPP_IN_INVERT 0xFFFFFFFF /* Inverted value is got*/ +#define MV_GPP_IN_ORIGIN 0 /* original value is got*/ + +/* mvGppTypeSet - Set PP pin mode (IN or OUT) */ +MV_STATUS mvGppTypeSet(MV_U32 group, MV_U32 mask, MV_U32 value); + +/* mvGppBlinkEn - Set a GPP (IN) Pin list to blink every ~100ms */ +MV_STATUS mvGppBlinkEn(MV_U32 group, MV_U32 mask, MV_U32 value); + +/* mvGppPolaritySet - Set a GPP (IN) Pin list Polarity mode. */ +MV_STATUS mvGppPolaritySet(MV_U32 group, MV_U32 mask, MV_U32 value); + +/* mvGppPolarityGet - Get the Polarity of a GPP Pin */ +MV_U32 mvGppPolarityGet(MV_U32 group, MV_U32 mask); + +/* mvGppValueGet - Get a GPP Pin list value.*/ +MV_U32 mvGppValueGet(MV_U32 group, MV_U32 mask); + + +/* mvGppValueSet - Set a GPP Pin list value. */ +MV_STATUS mvGppValueSet (MV_U32 group, MV_U32 mask, MV_U32 value); + +#endif /* #ifndef __INCmvGppH */ + diff --git a/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/mv_hal/gpp/mvGppRegs.h b/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/mv_hal/gpp/mvGppRegs.h new file mode 100644 index 0000000000..b6fec34fa8 --- /dev/null +++ b/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/mv_hal/gpp/mvGppRegs.h @@ -0,0 +1,116 @@ +/******************************************************************************* +Copyright (C) Marvell International Ltd. and its affiliates + +This software file (the "File") is owned and distributed by Marvell +International Ltd. and/or its affiliates ("Marvell") under the following +alternative licensing terms. Once you have made an election to distribute the +File under one of the following license alternatives, please (i) delete this +introductory statement regarding license alternatives, (ii) delete the two +license alternatives that you have not elected to use and (iii) preserve the +Marvell copyright notice above. + +******************************************************************************** +Marvell Commercial License Option + +If you received this File from Marvell and you have entered into a commercial +license agreement (a "Commercial License") with Marvell, the File is licensed +to you under the terms of the applicable Commercial License. + +******************************************************************************** +Marvell GPL License Option + +If you received this File from Marvell, you may opt to use, redistribute and/or +modify this File in accordance with the terms and conditions of the General +Public License Version 2, June 1991 (the "GPL License"), a copy of which is +available along with the File in the license.txt file or by writing to the Free +Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or +on the worldwide web at http://www.gnu.org/licenses/gpl.txt. + +THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED +WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY +DISCLAIMED. The GPL License provides additional details about this warranty +disclaimer. +******************************************************************************** +Marvell BSD License Option + +If you received this File from Marvell, you may opt to use, redistribute and/or +modify this File under the following licensing terms. +Redistribution and use in source and binary forms, with or without modification, +are permitted provided that the following conditions are met: + + * Redistributions of source code must retain the above copyright notice, + this list of conditions and the following disclaimer. + + * Redistributions in binary form must reproduce the above copyright + notice, this list of conditions and the following disclaimer in the + documentation and/or other materials provided with the distribution. + + * Neither the name of Marvell nor the names of its contributors may be + used to endorse or promote products derived from this software without + specific prior written permission. + +THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND +ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED +WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE +DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR +ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES +(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; +LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON +ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS +SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + +*******************************************************************************/ + +#ifndef __INCmvGppRegsH +#define __INCmvGppRegsH + +#define MV_GPP0 BIT0 +#define MV_GPP1 BIT1 +#define MV_GPP2 BIT2 +#define MV_GPP3 BIT3 +#define MV_GPP4 BIT4 +#define MV_GPP5 BIT5 +#define MV_GPP6 BIT6 +#define MV_GPP7 BIT7 +#define MV_GPP8 BIT8 +#define MV_GPP9 BIT9 +#define MV_GPP10 BIT10 +#define MV_GPP11 BIT11 +#define MV_GPP12 BIT12 +#define MV_GPP13 BIT13 +#define MV_GPP14 BIT14 +#define MV_GPP15 BIT15 +#define MV_GPP16 BIT16 +#define MV_GPP17 BIT17 +#define MV_GPP18 BIT18 +#define MV_GPP19 BIT19 +#define MV_GPP20 BIT20 +#define MV_GPP21 BIT21 +#define MV_GPP22 BIT22 +#define MV_GPP23 BIT23 +#define MV_GPP24 BIT24 +#define MV_GPP25 BIT25 +#define MV_GPP26 BIT26 +#define MV_GPP27 BIT27 +#define MV_GPP28 BIT28 +#define MV_GPP29 BIT29 +#define MV_GPP30 BIT30 +#define MV_GPP31 BIT31 + + +/* registers offsets */ + +#define GPP_DATA_OUT_REG(grp) ((grp == 0) ? 0x10100 : 0x10140) +#define GPP_DATA_OUT_EN_REG(grp) ((grp == 0) ? 0x10104 : 0x10144) +#define GPP_BLINK_EN_REG(grp) ((grp == 0) ? 0x10108 : 0x10148) +#define GPP_DATA_IN_POL_REG(grp) ((grp == 0) ? 0x1010C : 0x1014c) +#define GPP_DATA_IN_REG(grp) ((grp == 0) ? 0x10110 : 0x10150) +#define GPP_INT_CAUSE_REG(grp) ((grp == 0) ? 0x10114 : 0x10154) +#define GPP_INT_MASK_REG(grp) ((grp == 0) ? 0x10118 : 0x10158) +#define GPP_INT_LVL_REG(grp) ((grp == 0) ? 0x1011c : 0x1015c) + +#define GPP_DATA_OUT_SET_REG 0x10120 +#define GPP_DATA_OUT_CLEAR_REG 0x10124 + +#endif /* #ifndef __INCmvGppRegsH */ diff --git a/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/mv_hal/pci-if/mvPciIf.c b/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/mv_hal/pci-if/mvPciIf.c new file mode 100644 index 0000000000..672d3e31f8 --- /dev/null +++ b/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/mv_hal/pci-if/mvPciIf.c @@ -0,0 +1,669 @@ +/******************************************************************************* +Copyright (C) Marvell International Ltd. and its affiliates + +This software file (the "File") is owned and distributed by Marvell +International Ltd. and/or its affiliates ("Marvell") under the following +alternative licensing terms. Once you have made an election to distribute the +File under one of the following license alternatives, please (i) delete this +introductory statement regarding license alternatives, (ii) delete the two +license alternatives that you have not elected to use and (iii) preserve the +Marvell copyright notice above. + +******************************************************************************** +Marvell Commercial License Option + +If you received this File from Marvell and you have entered into a commercial +license agreement (a "Commercial License") with Marvell, the File is licensed +to you under the terms of the applicable Commercial License. + +******************************************************************************** +Marvell GPL License Option + +If you received this File from Marvell, you may opt to use, redistribute and/or +modify this File in accordance with the terms and conditions of the General +Public License Version 2, June 1991 (the "GPL License"), a copy of which is +available along with the File in the license.txt file or by writing to the Free +Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or +on the worldwide web at http://www.gnu.org/licenses/gpl.txt. + +THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED +WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY +DISCLAIMED. The GPL License provides additional details about this warranty +disclaimer. +******************************************************************************** +Marvell BSD License Option + +If you received this File from Marvell, you may opt to use, redistribute and/or +modify this File under the following licensing terms. +Redistribution and use in source and binary forms, with or without modification, +are permitted provided that the following conditions are met: + + * Redistributions of source code must retain the above copyright notice, + this list of conditions and the following disclaimer. + + * Redistributions in binary form must reproduce the above copyright + notice, this list of conditions and the following disclaimer in the + documentation and/or other materials provided with the distribution. + + * Neither the name of Marvell nor the names of its contributors may be + used to endorse or promote products derived from this software without + specific prior written permission. + +THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND +ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED +WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE +DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR +ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES +(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; +LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON +ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS +SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + +*******************************************************************************/ + +#include "mvPciIf.h" +#include "ctrlEnv/sys/mvSysPex.h" + +#if defined(MV_INCLUDE_PCI) +#include "ctrlEnv/sys/mvSysPci.h" +#endif + + +/* defines */ +#ifdef MV_DEBUG + #define DB(x) x +#else + #define DB(x) +#endif + + +/******************************************************************************* +* mvPciInit - Initialize PCI interfaces +* +* DESCRIPTION: +* +* INPUT: +* +* +* OUTPUT: +* None. +* +* RETURN: +* MV_OK if function success otherwise MV_ERROR or MV_BAD_PARAM +* +*******************************************************************************/ + + +MV_STATUS mvPciIfInit(MV_U32 pciIf, PCI_IF_MODE pciIfmode) +{ + PCI_IF_TYPE pciIfType = mvPciIfTypeGet(pciIf); + + if (PCI_IF_TYPE_CONVEN_PCIX == pciIfType) + { + #if defined(MV_INCLUDE_PCI) + + MV_PCI_MOD pciMod; + + if (PCI_IF_MODE_HOST == pciIfmode) + { + pciMod = MV_PCI_MOD_HOST; + } + else if (PCI_IF_MODE_DEVICE == pciIfmode) + { + pciMod = MV_PCI_MOD_DEVICE; + } + else + { + mvOsPrintf("%s: ERROR!!! Bus %d mode %d neither host nor device!\n", + __FUNCTION__, pciIf, pciIfmode); + return MV_FAIL; + } + + return mvPciInit(pciIf - MV_PCI_START_IF, pciMod); + #else + return MV_OK; + #endif + } + else if (PCI_IF_TYPE_PEX == pciIfType) + { + #if defined(MV_INCLUDE_PEX) + + MV_PEX_TYPE pexType; + + if (PCI_IF_MODE_HOST == pciIfmode) + { + pexType = MV_PEX_ROOT_COMPLEX; + } + else if (PCI_IF_MODE_DEVICE == pciIfmode) + { + pexType = MV_PEX_END_POINT; + } + else + { + mvOsPrintf("%s: ERROR!!! Bus %d type %d neither root complex nor" \ + " end point\n", __FUNCTION__, pciIf, pciIfmode); + return MV_FAIL; + } + return mvPexInit(pciIf - MV_PEX_START_IF, pexType); + + #else + return MV_OK; + #endif + + } + else + { + mvOsPrintf("%s: ERROR!!! Invalid pciIf %d\n", __FUNCTION__, pciIf); + } + + return MV_FAIL; + +} + +/* PCI configuration space read write */ + +/******************************************************************************* +* mvPciConfigRead - Read from configuration space +* +* DESCRIPTION: +* This function performs a 32 bit read from PCI configuration space. +* It supports both type 0 and type 1 of Configuration Transactions +* (local and over bridge). In order to read from local bus segment, use +* bus number retrieved from mvPciLocalBusNumGet(). Other bus numbers +* will result configuration transaction of type 1 (over bridge). +* +* INPUT: +* pciIf - PCI interface number. +* bus - PCI segment bus number. +* dev - PCI device number. +* func - Function number. +* regOffs - Register offset. +* +* OUTPUT: +* None. +* +* RETURN: +* 32bit register data, 0xffffffff on error +* +*******************************************************************************/ +MV_U32 mvPciIfConfigRead (MV_U32 pciIf, MV_U32 bus, MV_U32 dev, MV_U32 func, + MV_U32 regOff) +{ + PCI_IF_TYPE pciIfType = mvPciIfTypeGet(pciIf); + + if (PCI_IF_TYPE_CONVEN_PCIX == pciIfType) + { + #if defined(MV_INCLUDE_PCI) + return mvPciConfigRead(pciIf - MV_PCI_START_IF, + bus, + dev, + func, + regOff); + #else + return 0xffffffff; + #endif + } + else if (PCI_IF_TYPE_PEX == pciIfType) + { + #if defined(MV_INCLUDE_PEX) + return mvPexConfigRead(pciIf - MV_PEX_START_IF, + bus, + dev, + func, + regOff); + #else + return 0xffffffff; + #endif + + } + else + { + mvOsPrintf("%s: ERROR!!! Invalid pciIf %d\n", __FUNCTION__, pciIf); + } + + return 0; + +} + +/******************************************************************************* +* mvPciConfigWrite - Write to configuration space +* +* DESCRIPTION: +* This function performs a 32 bit write to PCI configuration space. +* It supports both type 0 and type 1 of Configuration Transactions +* (local and over bridge). In order to write to local bus segment, use +* bus number retrieved from mvPciLocalBusNumGet(). Other bus numbers +* will result configuration transaction of type 1 (over bridge). +* +* INPUT: +* pciIf - PCI interface number. +* bus - PCI segment bus number. +* dev - PCI device number. +* func - Function number. +* regOffs - Register offset. +* data - 32bit data. +* +* OUTPUT: +* None. +* +* RETURN: +* MV_BAD_PARAM for bad parameters ,MV_ERROR on error ! otherwise MV_OK +* +*******************************************************************************/ +MV_STATUS mvPciIfConfigWrite(MV_U32 pciIf, MV_U32 bus, MV_U32 dev, + MV_U32 func, MV_U32 regOff, MV_U32 data) +{ + PCI_IF_TYPE pciIfType = mvPciIfTypeGet(pciIf); + + if (PCI_IF_TYPE_CONVEN_PCIX == pciIfType) + { + #if defined(MV_INCLUDE_PCI) + return mvPciConfigWrite(pciIf - MV_PCI_START_IF, + bus, + dev, + func, + regOff, + data); + #else + return MV_OK; + #endif + } + else if (PCI_IF_TYPE_PEX == pciIfType) + { + #if defined(MV_INCLUDE_PEX) + return mvPexConfigWrite(pciIf - MV_PEX_START_IF, + bus, + dev, + func, + regOff, + data); + #else + return MV_OK; + #endif + + } + else + { + mvOsPrintf("%s: ERROR!!! Invalid pciIf %d\n", __FUNCTION__, pciIf); + } + + return MV_FAIL; + +} + +/******************************************************************************* +* mvPciMasterEnable - Enable/disale PCI interface master transactions. +* +* DESCRIPTION: +* This function performs read modified write to PCI command status +* (offset 0x4) to set/reset bit 2. After this bit is set, the PCI +* master is allowed to gain ownership on the bus, otherwise it is +* incapable to do so. +* +* INPUT: +* pciIf - PCI interface number. +* enable - Enable/disable parameter. +* +* OUTPUT: +* None. +* +* RETURN: +* MV_BAD_PARAM for bad parameters ,MV_ERROR on error ! otherwise MV_OK +* +*******************************************************************************/ +MV_STATUS mvPciIfMasterEnable(MV_U32 pciIf, MV_BOOL enable) +{ + + PCI_IF_TYPE pciIfType = mvPciIfTypeGet(pciIf); + + if (PCI_IF_TYPE_CONVEN_PCIX == pciIfType) + { + #if defined(MV_INCLUDE_PCI) + return mvPciMasterEnable(pciIf - MV_PCI_START_IF, + enable); + #else + return MV_OK; + #endif + } + else if (PCI_IF_TYPE_PEX == pciIfType) + { + #if defined(MV_INCLUDE_PEX) + return mvPexMasterEnable(pciIf - MV_PEX_START_IF, + enable); + #else + return MV_OK; + #endif + } + else + { + mvOsPrintf("%s: ERROR!!! Invalid pciIf %d\n", __FUNCTION__, pciIf); + } + + return MV_FAIL; + +} + + +/******************************************************************************* +* mvPciSlaveEnable - Enable/disale PCI interface slave transactions. +* +* DESCRIPTION: +* This function performs read modified write to PCI command status +* (offset 0x4) to set/reset bit 0 and 1. After those bits are set, +* the PCI slave is allowed to respond to PCI IO space access (bit 0) +* and PCI memory space access (bit 1). +* +* INPUT: +* pciIf - PCI interface number. +* dev - PCI device number. +* enable - Enable/disable parameter. +* +* OUTPUT: +* None. +* +* RETURN: +* MV_BAD_PARAM for bad parameters ,MV_ERROR on error ! otherwise MV_OK +* +*******************************************************************************/ +MV_STATUS mvPciIfSlaveEnable(MV_U32 pciIf,MV_U32 bus, MV_U32 dev, MV_BOOL enable) +{ + + PCI_IF_TYPE pciIfType = mvPciIfTypeGet(pciIf); + + if (PCI_IF_TYPE_CONVEN_PCIX == pciIfType) + { + #if defined(MV_INCLUDE_PCI) + return mvPciSlaveEnable(pciIf - MV_PCI_START_IF,bus,dev, + enable); + #else + return MV_OK; + #endif + } + else if (PCI_IF_TYPE_PEX == pciIfType) + { + #if defined(MV_INCLUDE_PEX) + return mvPexSlaveEnable(pciIf - MV_PEX_START_IF,bus,dev, + enable); + #else + return MV_OK; + #endif + } + else + { + mvOsPrintf("%s: ERROR!!! Invalid pciIf %d\n", __FUNCTION__, pciIf); + } + + return MV_FAIL; + +} + +/******************************************************************************* +* mvPciLocalBusNumSet - Set PCI interface local bus number. +* +* DESCRIPTION: +* This function sets given PCI interface its local bus number. +* Note: In case the PCI interface is PCI-X, the information is read-only. +* +* INPUT: +* pciIf - PCI interface number. +* busNum - Bus number. +* +* OUTPUT: +* None. +* +* RETURN: +* MV_NOT_ALLOWED in case PCI interface is PCI-X. +* MV_BAD_PARAM on bad parameters , +* otherwise MV_OK +* +*******************************************************************************/ +MV_STATUS mvPciIfLocalBusNumSet(MV_U32 pciIf, MV_U32 busNum) +{ + PCI_IF_TYPE pciIfType = mvPciIfTypeGet(pciIf); + + if (PCI_IF_TYPE_CONVEN_PCIX == pciIfType) + { + #if defined(MV_INCLUDE_PCI) + return mvPciLocalBusNumSet(pciIf - MV_PCI_START_IF, + busNum); + #else + return MV_OK; + #endif + } + else if (PCI_IF_TYPE_PEX == pciIfType) + { + #if defined(MV_INCLUDE_PEX) + return mvPexLocalBusNumSet(pciIf - MV_PEX_START_IF, + busNum); + #else + return MV_OK; + #endif + } + else + { + mvOsPrintf("%s: ERROR!!! Invalid pciIf %d\n", __FUNCTION__, pciIf); + } + + return MV_FAIL; + +} + +/******************************************************************************* +* mvPciLocalBusNumGet - Get PCI interface local bus number. +* +* DESCRIPTION: +* This function gets the local bus number of a given PCI interface. +* +* INPUT: +* pciIf - PCI interface number. +* +* OUTPUT: +* None. +* +* RETURN: +* Local bus number.0xffffffff on Error +* +*******************************************************************************/ +MV_U32 mvPciIfLocalBusNumGet(MV_U32 pciIf) +{ + PCI_IF_TYPE pciIfType = mvPciIfTypeGet(pciIf); + + if (PCI_IF_TYPE_CONVEN_PCIX == pciIfType) + { + #if defined(MV_INCLUDE_PCI) + return mvPciLocalBusNumGet(pciIf - MV_PCI_START_IF); + #else + return 0xFFFFFFFF; + #endif + } + else if (PCI_IF_TYPE_PEX == pciIfType) + { + #if defined(MV_INCLUDE_PEX) + return mvPexLocalBusNumGet(pciIf - MV_PEX_START_IF); + #else + return 0xFFFFFFFF; + #endif + + } + else + { + mvOsPrintf("%s: ERROR!!! Invalid pciIf %d\n",__FUNCTION__, pciIf); + } + + return 0; + +} + + +/******************************************************************************* +* mvPciLocalDevNumSet - Set PCI interface local device number. +* +* DESCRIPTION: +* This function sets given PCI interface its local device number. +* Note: In case the PCI interface is PCI-X, the information is read-only. +* +* INPUT: +* pciIf - PCI interface number. +* devNum - Device number. +* +* OUTPUT: +* None. +* +* RETURN: +* MV_NOT_ALLOWED in case PCI interface is PCI-X. MV_BAD_PARAM on bad parameters , +* otherwise MV_OK +* +*******************************************************************************/ +MV_STATUS mvPciIfLocalDevNumSet(MV_U32 pciIf, MV_U32 devNum) +{ + PCI_IF_TYPE pciIfType = mvPciIfTypeGet(pciIf); + + if (PCI_IF_TYPE_CONVEN_PCIX == pciIfType) + { + #if defined(MV_INCLUDE_PCI) + return mvPciLocalDevNumSet(pciIf - MV_PCI_START_IF, + devNum); + #else + return MV_OK; + #endif + } + else if (PCI_IF_TYPE_PEX == pciIfType) + { + #if defined(MV_INCLUDE_PEX) + return mvPexLocalDevNumSet(pciIf - MV_PEX_START_IF, + devNum); + #else + return MV_OK; + #endif + } + else + { + mvOsPrintf("%s: ERROR!!! Invalid pciIf %d\n", __FUNCTION__, pciIf); + } + + return MV_FAIL; + +} + +/******************************************************************************* +* mvPciLocalDevNumGet - Get PCI interface local device number. +* +* DESCRIPTION: +* This function gets the local device number of a given PCI interface. +* +* INPUT: +* pciIf - PCI interface number. +* +* OUTPUT: +* None. +* +* RETURN: +* Local device number. 0xffffffff on Error +* +*******************************************************************************/ +MV_U32 mvPciIfLocalDevNumGet(MV_U32 pciIf) +{ + PCI_IF_TYPE pciIfType = mvPciIfTypeGet(pciIf); + + if (PCI_IF_TYPE_CONVEN_PCIX == pciIfType) + { + #if defined(MV_INCLUDE_PCI) + return mvPciLocalDevNumGet(pciIf - MV_PCI_START_IF); + #else + return 0xFFFFFFFF; + #endif + } + else if (PCI_IF_TYPE_PEX == pciIfType) + { + #if defined(MV_INCLUDE_PEX) + return mvPexLocalDevNumGet(pciIf - MV_PEX_START_IF); + #else + return 0xFFFFFFFF; + #endif + + } + else + { + mvOsPrintf("%s: ERROR!!! Invalid pciIf %d\n", __FUNCTION__, pciIf); + } + + return 0; + +} + +/******************************************************************************* +* mvPciIfTypeGet - +* +* DESCRIPTION: +* +* INPUT: +* +* OUTPUT: +* None. +* +* RETURN: +* +*******************************************************************************/ + +PCI_IF_TYPE mvPciIfTypeGet(MV_U32 pciIf) +{ + + if ((pciIf >= MV_PCI_START_IF)&&(pciIf < MV_PCI_MAX_IF + MV_PCI_START_IF)) + { + return PCI_IF_TYPE_CONVEN_PCIX; + } + else if ((pciIf >= MV_PEX_START_IF) && + (pciIf < MV_PEX_MAX_IF + MV_PEX_START_IF)) + { + return PCI_IF_TYPE_PEX; + + } + else + { + mvOsPrintf("%s: ERROR!!! Invalid pciIf %d\n", __FUNCTION__, pciIf); + } + + return 0xffffffff; + +} + +/******************************************************************************* +* mvPciIfTypeGet - +* +* DESCRIPTION: +* +* INPUT: +* +* OUTPUT: +* None. +* +* RETURN: +* +*******************************************************************************/ + +MV_U32 mvPciRealIfNumGet(MV_U32 pciIf) +{ + + PCI_IF_TYPE pciIfType = mvPciIfTypeGet(pciIf); + + if (PCI_IF_TYPE_CONVEN_PCIX == pciIfType) + { + return (pciIf - MV_PCI_START_IF); + } + else if (PCI_IF_TYPE_PEX == pciIfType) + { + return (pciIf - MV_PEX_START_IF); + + } + else + { + mvOsPrintf("%s: ERROR!!! Invalid pciIf %d\n", __FUNCTION__, pciIf); + } + + return 0xffffffff; + +} + + + diff --git a/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/mv_hal/pci-if/mvPciIf.h b/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/mv_hal/pci-if/mvPciIf.h new file mode 100644 index 0000000000..9c2d1604e7 --- /dev/null +++ b/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/mv_hal/pci-if/mvPciIf.h @@ -0,0 +1,134 @@ +/******************************************************************************* +Copyright (C) Marvell International Ltd. and its affiliates + +This software file (the "File") is owned and distributed by Marvell +International Ltd. and/or its affiliates ("Marvell") under the following +alternative licensing terms. Once you have made an election to distribute the +File under one of the following license alternatives, please (i) delete this +introductory statement regarding license alternatives, (ii) delete the two +license alternatives that you have not elected to use and (iii) preserve the +Marvell copyright notice above. + +******************************************************************************** +Marvell Commercial License Option + +If you received this File from Marvell and you have entered into a commercial +license agreement (a "Commercial License") with Marvell, the File is licensed +to you under the terms of the applicable Commercial License. + +******************************************************************************** +Marvell GPL License Option + +If you received this File from Marvell, you may opt to use, redistribute and/or +modify this File in accordance with the terms and conditions of the General +Public License Version 2, June 1991 (the "GPL License"), a copy of which is +available along with the File in the license.txt file or by writing to the Free +Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or +on the worldwide web at http://www.gnu.org/licenses/gpl.txt. + +THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED +WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY +DISCLAIMED. The GPL License provides additional details about this warranty +disclaimer. +******************************************************************************** +Marvell BSD License Option + +If you received this File from Marvell, you may opt to use, redistribute and/or +modify this File under the following licensing terms. +Redistribution and use in source and binary forms, with or without modification, +are permitted provided that the following conditions are met: + + * Redistributions of source code must retain the above copyright notice, + this list of conditions and the following disclaimer. + + * Redistributions in binary form must reproduce the above copyright + notice, this list of conditions and the following disclaimer in the + documentation and/or other materials provided with the distribution. + + * Neither the name of Marvell nor the names of its contributors may be + used to endorse or promote products derived from this software without + specific prior written permission. + +THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND +ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED +WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE +DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR +ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES +(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; +LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON +ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS +SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + +*******************************************************************************/ + +#ifndef __INCPCIIFH +#define __INCPCIIFH + +#include "mvSysHwConfig.h" +#include "pci-if/mvPciIfRegs.h" +#if defined(MV_INCLUDE_PEX) +#include "pex/mvPex.h" +#endif +#if defined(MV_INCLUDE_PCI) +#include "pci/mvPci.h" +#endif +#include "ctrlEnv/mvCtrlEnvLib.h" +#include "ctrlEnv/mvCtrlEnvAddrDec.h" + +typedef enum _mvPCIIfType +{ + PCI_IF_TYPE_CONVEN_PCIX, + PCI_IF_TYPE_PEX + +}PCI_IF_TYPE; + +typedef enum _mvPCIIfMode +{ + PCI_IF_MODE_HOST, + PCI_IF_MODE_DEVICE +}PCI_IF_MODE; + + +/* Global Functions prototypes */ + +/* mvPciIfInit - Initialize PCI interfaces*/ +MV_STATUS mvPciIfInit(MV_U32 pciIf, PCI_IF_MODE pciIfmode); + +/* mvPciIfConfigRead - Read from configuration space */ +MV_U32 mvPciIfConfigRead (MV_U32 pciIf, MV_U32 bus, MV_U32 dev, + MV_U32 func,MV_U32 regOff); + +/* mvPciIfConfigWrite - Write to configuration space */ +MV_STATUS mvPciIfConfigWrite(MV_U32 pciIf, MV_U32 bus, MV_U32 dev, + MV_U32 func, MV_U32 regOff, MV_U32 data); + +/* mvPciIfMasterEnable - Enable/disale PCI interface master transactions.*/ +MV_STATUS mvPciIfMasterEnable(MV_U32 pciIf, MV_BOOL enable); + +/* mvPciIfSlaveEnable - Enable/disale PCI interface slave transactions.*/ +MV_STATUS mvPciIfSlaveEnable(MV_U32 pciIf,MV_U32 bus, MV_U32 dev, + MV_BOOL enable); + +/* mvPciIfLocalBusNumSet - Set PCI interface local bus number.*/ +MV_STATUS mvPciIfLocalBusNumSet(MV_U32 pciIf, MV_U32 busNum); + +/* mvPciIfLocalBusNumGet - Get PCI interface local bus number.*/ +MV_U32 mvPciIfLocalBusNumGet(MV_U32 pciIf); + +/* mvPciIfLocalDevNumSet - Set PCI interface local device number.*/ +MV_STATUS mvPciIfLocalDevNumSet(MV_U32 pciIf, MV_U32 devNum); + +/* mvPciIfLocalDevNumGet - Get PCI interface local device number.*/ +MV_U32 mvPciIfLocalDevNumGet(MV_U32 pciIf); + +/* mvPciIfTypeGet - Get PCI If type*/ +PCI_IF_TYPE mvPciIfTypeGet(MV_U32 pciIf); + +MV_U32 mvPciRealIfNumGet(MV_U32 pciIf); + +/* mvPciIfAddrDecShow - Display address decode windows attributes */ +MV_VOID mvPciIfAddrDecShow(MV_VOID); + +#endif /* #ifndef __INCPCIIFH */ + diff --git a/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/mv_hal/pci-if/mvPciIfRegs.h b/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/mv_hal/pci-if/mvPciIfRegs.h new file mode 100644 index 0000000000..08d4d2d901 --- /dev/null +++ b/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/mv_hal/pci-if/mvPciIfRegs.h @@ -0,0 +1,245 @@ +/******************************************************************************* +Copyright (C) Marvell International Ltd. and its affiliates + +This software file (the "File") is owned and distributed by Marvell +International Ltd. and/or its affiliates ("Marvell") under the following +alternative licensing terms. Once you have made an election to distribute the +File under one of the following license alternatives, please (i) delete this +introductory statement regarding license alternatives, (ii) delete the two +license alternatives that you have not elected to use and (iii) preserve the +Marvell copyright notice above. + +******************************************************************************** +Marvell Commercial License Option + +If you received this File from Marvell and you have entered into a commercial +license agreement (a "Commercial License") with Marvell, the File is licensed +to you under the terms of the applicable Commercial License. + +******************************************************************************** +Marvell GPL License Option + +If you received this File from Marvell, you may opt to use, redistribute and/or +modify this File in accordance with the terms and conditions of the General +Public License Version 2, June 1991 (the "GPL License"), a copy of which is +available along with the File in the license.txt file or by writing to the Free +Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or +on the worldwide web at http://www.gnu.org/licenses/gpl.txt. + +THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED +WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY +DISCLAIMED. The GPL License provides additional details about this warranty +disclaimer. +******************************************************************************** +Marvell BSD License Option + +If you received this File from Marvell, you may opt to use, redistribute and/or +modify this File under the following licensing terms. +Redistribution and use in source and binary forms, with or without modification, +are permitted provided that the following conditions are met: + + * Redistributions of source code must retain the above copyright notice, + this list of conditions and the following disclaimer. + + * Redistributions in binary form must reproduce the above copyright + notice, this list of conditions and the following disclaimer in the + documentation and/or other materials provided with the distribution. + + * Neither the name of Marvell nor the names of its contributors may be + used to endorse or promote products derived from this software without + specific prior written permission. + +THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND +ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED +WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE +DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR +ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES +(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; +LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON +ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS +SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + +*******************************************************************************/ + +#ifndef __INCPCIIFREGSH +#define __INCPCIIFREGSH + + +/* defines */ +#define MAX_PCI_DEVICES 32 +#define MAX_PCI_FUNCS 8 +#define MAX_PCI_BUSSES 128 + +/***************************************/ +/* PCI Configuration registers */ +/***************************************/ + +/*********************************************/ +/* PCI Configuration, Function 0, Registers */ +/*********************************************/ + + +/* Standard registers */ +#define PCI_DEVICE_AND_VENDOR_ID 0x000 +#define PCI_STATUS_AND_COMMAND 0x004 +#define PCI_CLASS_CODE_AND_REVISION_ID 0x008 +#define PCI_BIST_HDR_TYPE_LAT_TMR_CACHE_LINE 0x00C +#define PCI_MEMORY_BAR_BASE_ADDR(barNum) (0x010 + ((barNum) << 2)) +#define PCI_SUBSYS_ID_AND_SUBSYS_VENDOR_ID 0x02C +#define PCI_EXPANSION_ROM_BASE_ADDR_REG 0x030 +#define PCI_CAPABILTY_LIST_POINTER 0x034 +#define PCI_INTERRUPT_PIN_AND_LINE 0x03C + + +/* PCI Device and Vendor ID Register (PDVIR) */ +#define PDVIR_VEN_ID_OFFS 0 /* Vendor ID */ +#define PDVIR_VEN_ID_MASK (0xffff << PDVIR_VEN_ID_OFFS) + +#define PDVIR_DEV_ID_OFFS 16 /* Device ID */ +#define PDVIR_DEV_ID_MASK (0xffff << PDVIR_DEV_ID_OFFS) + +/* PCI Status and Command Register (PSCR) */ +#define PSCR_IO_EN BIT0 /* IO Enable */ +#define PSCR_MEM_EN BIT1 /* Memory Enable */ +#define PSCR_MASTER_EN BIT2 /* Master Enable */ +#define PSCR_SPECIAL_EN BIT3 /* Special Cycle Enable */ +#define PSCR_MEM_WRI_INV BIT4 /* Memory Write and Invalidate Enable */ +#define PSCR_VGA BIT5 /* VGA Palette Snoops */ +#define PSCR_PERR_EN BIT6 /* Parity Errors Respond Enable */ +#define PSCR_ADDR_STEP BIT7 /* Address Stepping Enable (Wait Cycle En)*/ +#define PSCR_SERR_EN BIT8 /* Ability to assert SERR# line */ +#define PSCR_FAST_BTB_EN BIT9 /* generate fast back-to-back transactions*/ +#define PSCR_CAP_LIST BIT20 /* Capability List Support */ +#define PSCR_66MHZ_EN BIT21 /* 66 MHz Capable */ +#define PSCR_UDF_EN BIT22 /* User definable features */ +#define PSCR_TAR_FAST_BB BIT23 /* fast back-to-back transactions capable */ +#define PSCR_DATA_PERR BIT24 /* Data Parity reported */ + +#define PSCR_DEVSEL_TIM_OFFS 25 /* DEVSEL timing */ +#define PSCR_DEVSEL_TIM_MASK (0x3 << PSCR_DEVSEL_TIM_OFFS) +#define PSCR_DEVSEL_TIM_FAST (0x0 << PSCR_DEVSEL_TIM_OFFS) +#define PSCR_DEVSEL_TIM_MED (0x1 << PSCR_DEVSEL_TIM_OFFS) +#define PSCR_DEVSEL_TIM_SLOW (0x2 << PSCR_DEVSEL_TIM_OFFS) + +#define PSCR_SLAVE_TABORT BIT27 /* Signalled Target Abort */ +#define PSCR_MASTER_TABORT BIT28 /* Recieved Target Abort */ +#define PSCR_MABORT BIT29 /* Recieved Master Abort */ +#define PSCR_SYSERR BIT30 /* Signalled system error */ +#define PSCR_DET_PARERR BIT31 /* Detect Parity Error */ + +/* PCI configuration register offset=0x08 fields + (PCI_CLASS_CODE_AND_REVISION_ID)(PCCRI) */ + +#define PCCRIR_REVID_OFFS 0 /* Revision ID */ +#define PCCRIR_REVID_MASK (0xff << PCCRIR_REVID_OFFS) + +#define PCCRIR_FULL_CLASS_OFFS 8 /* Full Class Code */ +#define PCCRIR_FULL_CLASS_MASK (0xffffff << PCCRIR_FULL_CLASS_OFFS) + +#define PCCRIR_PROGIF_OFFS 8 /* Prog .I/F*/ +#define PCCRIR_PROGIF_MASK (0xff << PCCRIR_PROGIF_OFFS) + +#define PCCRIR_SUB_CLASS_OFFS 16 /* Sub Class*/ +#define PCCRIR_SUB_CLASS_MASK (0xff << PCCRIR_SUB_CLASS_OFFS) + +#define PCCRIR_BASE_CLASS_OFFS 24 /* Base Class*/ +#define PCCRIR_BASE_CLASS_MASK (0xff << PCCRIR_BASE_CLASS_OFFS) + +/* PCI configuration register offset=0x0C fields + (PCI_BIST_HEADER_TYPE_LATENCY_TIMER_CACHE_LINE)(PBHTLTCL) */ + +#define PBHTLTCLR_CACHELINE_OFFS 0 /* Specifies the cache line size */ +#define PBHTLTCLR_CACHELINE_MASK (0xff << PBHTLTCLR_CACHELINE_OFFS) + +#define PBHTLTCLR_LATTIMER_OFFS 8 /* latency timer */ +#define PBHTLTCLR_LATTIMER_MASK (0xff << PBHTLTCLR_LATTIMER_OFFS) + +#define PBHTLTCLR_HEADTYPE_FULL_OFFS 16 /* Full Header Type */ +#define PBHTLTCLR_HEADTYPE_FULL_MASK (0xff << PBHTLTCLR_HEADTYPE_FULL_OFFS) + +#define PBHTLTCLR_MULTI_FUNC BIT23 /* Multi/Single function */ + +#define PBHTLTCLR_HEADER_OFFS 16 /* Header type */ +#define PBHTLTCLR_HEADER_MASK (0x7f << PBHTLTCLR_HEADER_OFFS) +#define PBHTLTCLR_HEADER_STANDARD (0x0 << PBHTLTCLR_HEADER_OFFS) +#define PBHTLTCLR_HEADER_PCI2PCI_BRIDGE (0x1 << PBHTLTCLR_HEADER_OFFS) + + +#define PBHTLTCLR_BISTCOMP_OFFS 24 /* BIST Completion Code */ +#define PBHTLTCLR_BISTCOMP_MASK (0xf << PBHTLTCLR_BISTCOMP_OFFS) + +#define PBHTLTCLR_BISTACT BIT30 /* BIST Activate bit */ +#define PBHTLTCLR_BISTCAP BIT31 /* BIST Capable Bit */ + + +/* PCI Bar Base Low Register (PBBLR) */ +#define PBBLR_IOSPACE BIT0 /* Memory Space Indicator */ + +#define PBBLR_TYPE_OFFS 1 /* BAR Type/Init Val. */ +#define PBBLR_TYPE_MASK (0x3 << PBBLR_TYPE_OFFS) +#define PBBLR_TYPE_32BIT_ADDR (0x0 << PBBLR_TYPE_OFFS) +#define PBBLR_TYPE_64BIT_ADDR (0x2 << PBBLR_TYPE_OFFS) + +#define PBBLR_PREFETCH_EN BIT3 /* Prefetch Enable */ + + +#define PBBLR_MEM_BASE_OFFS 4 /* Memory Bar Base address. Corresponds to + address bits [31:4] */ +#define PBBLR_MEM_BASE_MASK (0xfffffff << PBBLR_MEM_BASE_OFFS) + +#define PBBLR_IO_BASE_OFFS 2 /* IO Bar Base address. Corresponds to + address bits [31:2] */ +#define PBBLR_IO_BASE_MASK (0x3fffffff << PBBLR_IO_BASE_OFFS) + + +#define PBBLR_BASE_OFFS 12 /* Base address. Address bits [31:12] */ +#define PBBLR_BASE_MASK (0xfffff << PBBLR_BASE_OFFS) +#define PBBLR_BASE_ALIGNMET (1 << PBBLR_BASE_OFFS) + + +/* PCI Bar Base High Fegister (PBBHR) */ +#define PBBHR_BASE_OFFS 0 /* Base address. Address bits [31:12] */ +#define PBBHR_BASE_MASK (0xffffffff << PBBHR_BASE_OFFS) + + +/* PCI configuration register offset=0x2C fields + (PCI_SUBSYSTEM_ID_AND_SUBSYSTEM_VENDOR_ID)(PSISVI) */ + +#define PSISVIR_VENID_OFFS 0 /* Subsystem Manufacturer Vendor ID Number */ +#define PSISVIR_VENID_MASK (0xffff << PSISVIR_VENID_OFFS) + +#define PSISVIR_DEVID_OFFS 16 /* Subsystem Device ID Number */ +#define PSISVIR_DEVID_MASK (0xffff << PSISVIR_DEVID_OFFS) + +/* PCI configuration register offset=0x30 fields + (PCI_EXPANSION_ROM_BASE_ADDR_REG)(PERBA) */ + +#define PERBAR_EXPROMEN BIT0 /* Expansion ROM Enable */ + +#define PERBAR_BASE_OFFS 12 /* Expansion ROM Base Address */ +#define PERBAR_BASE_MASK (0xfffff << PERBAR_BASE_OFFS) + +/* PCI configuration register offset=0x34 fields + (PCI_CAPABILTY_LIST_POINTER)(PCLP) */ + +#define PCLPR_CAPPTR_OFFS 0 /* Capability List Pointer */ +#define PCLPR_CAPPTR_MASK (0xff << PCLPR_CAPPTR_OFFS) + +/* PCI configuration register offset=0x3C fields + (PCI_INTERRUPT_PIN_AND_LINE)(PIPL) */ + +#define PIPLR_INTLINE_OFFS 0 /* Interrupt line (IRQ) */ +#define PIPLR_INTLINE_MASK (0xff << PIPLR_INTLINE_OFFS) + +#define PIPLR_INTPIN_OFFS 8 /* interrupt pin (A,B,C,D) */ +#define PIPLR_INTPIN_MASK (0xff << PIPLR_INTPIN_OFFS) + +#define PIPLR_MINGRANT_OFFS 16 /* Minimum Grant on 250 nano seconds units */ +#define PIPLR_MINGRANT_MASK (0xff << PIPLR_MINGRANT_OFFS) + +#define PIPLR_MAXLATEN_OFFS 24 /* Maximum latency on 250 nano seconds units */ +#define PIPLR_MAXLATEN_MASK (0xff << PIPLR_MAXLATEN_OFFS) + +#endif /* #ifndef __INCPCIIFREGSH */ + diff --git a/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/mv_hal/pci-if/pci_util/mvPciUtils.c b/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/mv_hal/pci-if/pci_util/mvPciUtils.c new file mode 100644 index 0000000000..f2169793b8 --- /dev/null +++ b/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/mv_hal/pci-if/pci_util/mvPciUtils.c @@ -0,0 +1,1006 @@ +/******************************************************************************* +Copyright (C) Marvell International Ltd. and its affiliates + +This software file (the "File") is owned and distributed by Marvell +International Ltd. and/or its affiliates ("Marvell") under the following +alternative licensing terms. Once you have made an election to distribute the +File under one of the following license alternatives, please (i) delete this +introductory statement regarding license alternatives, (ii) delete the two +license alternatives that you have not elected to use and (iii) preserve the +Marvell copyright notice above. + +******************************************************************************** +Marvell Commercial License Option + +If you received this File from Marvell and you have entered into a commercial +license agreement (a "Commercial License") with Marvell, the File is licensed +to you under the terms of the applicable Commercial License. + +******************************************************************************** +Marvell GPL License Option + +If you received this File from Marvell, you may opt to use, redistribute and/or +modify this File in accordance with the terms and conditions of the General +Public License Version 2, June 1991 (the "GPL License"), a copy of which is +available along with the File in the license.txt file or by writing to the Free +Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or +on the worldwide web at http://www.gnu.org/licenses/gpl.txt. + +THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED +WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY +DISCLAIMED. The GPL License provides additional details about this warranty +disclaimer. +******************************************************************************** +Marvell BSD License Option + +If you received this File from Marvell, you may opt to use, redistribute and/or +modify this File under the following licensing terms. +Redistribution and use in source and binary forms, with or without modification, +are permitted provided that the following conditions are met: + + * Redistributions of source code must retain the above copyright notice, + this list of conditions and the following disclaimer. + + * Redistributions in binary form must reproduce the above copyright + notice, this list of conditions and the following disclaimer in the + documentation and/or other materials provided with the distribution. + + * Neither the name of Marvell nor the names of its contributors may be + used to endorse or promote products derived from this software without + specific prior written permission. + +THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND +ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED +WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE +DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR +ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES +(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; +LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON +ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS +SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + +*******************************************************************************/ + +/* includes */ +#include "mvPciUtils.h" + +#include "ctrlEnv/mvCtrlEnvLib.h" + +/* #define MV_DEBUG */ +/* defines */ +#ifdef MV_DEBUG + #define DB(x) x + #define mvOsPrintf printf +#else + #define DB(x) +#endif + +/* +This module only support scanning of Header type 00h of pci devices +There is no suppotr for Header type 01h of pci devices ( PCI bridges ) +*/ + + +static MV_STATUS pciDetectDevice(MV_U32 pciIf, + MV_U32 bus, + MV_U32 dev, + MV_U32 func, + MV_PCI_DEVICE *pPciAgent); + +static MV_U32 pciDetectDeviceBars(MV_U32 pciIf, + MV_U32 bus, + MV_U32 dev, + MV_U32 func, + MV_PCI_DEVICE *pPciAgent); + + + + + + +/******************************************************************************* +* mvPciScan - Scan a PCI interface bus +* +* DESCRIPTION: +* Performs a full scan on a PCI interface and returns all possible details +* on the agents found on the bus. +* +* INPUT: +* pciIf - PCI Interface +* pPciAgents - Pointer to an Array of the pci agents to be detected +* pPciAgentsNum - pPciAgents array maximum number of elements +* +* OUTPUT: +* pPciAgents - Array of the pci agents detected on the bus +* pPciAgentsNum - Number of pci agents detected on the bus +* +* RETURN: +* MV_BAD_PARAM for bad parameters ,MV_ERROR on error ! otherwise MV_OK +* +*******************************************************************************/ + +MV_STATUS mvPciScan(MV_U32 pciIf, + MV_PCI_DEVICE *pPciAgents, + MV_U32 *pPciAgentsNum) +{ + + MV_U32 devIndex,funcIndex=0,busIndex=0,detectedDevNum=0; + MV_U32 localBus=mvPciIfLocalBusNumGet(pciIf); + MV_PCI_DEVICE *pPciDevice; + MV_PCI_DEVICE *pMainDevice; + + DB(mvOsPrintf("mvPciScan: PCI interface num %d\n", pciIf)); + /* Parameter checking */ + if (pciIf >= mvCtrlPexMaxIfGet()) + { + DB(mvOsPrintf("mvPciScan: ERR. Invalid PCI interface num %d\n", pciIf)); + return MV_BAD_PARAM; + } + if (NULL == pPciAgents) + { + DB(mvOsPrintf("mvPciScan: ERR. pPciAgents=NULL \n")); + return MV_BAD_PARAM; + } + if (NULL == pPciAgentsNum) + { + DB(mvOsPrintf("mvPciScan: ERR. pPciAgentsNum=NULL \n")); + return MV_BAD_PARAM; + } + + + DB(mvOsPrintf("mvPciScan: PCI interface num %d mvPciMasterEnable\n", pciIf)); + /* Master enable the MV PCI master */ + if (MV_OK != mvPciIfMasterEnable(pciIf,MV_TRUE)) + { + DB(mvOsPrintf("mvPciScan: ERR. mvPciMasterEnable failed \n")); + return MV_ERROR; + + } + + DB(mvOsPrintf("mvPciScan: PCI interface num scan%d\n", pciIf)); + + /* go through all busses */ + for (busIndex=localBus ; busIndex < MAX_PCI_BUSSES ; busIndex++) + { + /* go through all possible devices on the local bus */ + for (devIndex=0 ; devIndex < MAX_PCI_DEVICES ; devIndex++) + { + /* always start with function equal to zero */ + funcIndex=0; + + pPciDevice=&pPciAgents[detectedDevNum]; + DB(mvOsPrintf("mvPciScan: PCI interface num scan%d:%d\n", busIndex, devIndex)); + + if (MV_ERROR == pciDetectDevice(pciIf, + busIndex, + devIndex, + funcIndex, + pPciDevice)) + { + /* no device detected , try the next address */ + continue; + } + + /* We are here ! means we have detected a device*/ + /* always we start with only one function per device */ + pMainDevice = pPciDevice; + pPciDevice->funtionsNum = 1; + + + /* move on */ + detectedDevNum++; + + + /* check if we have no more room for a new device */ + if (detectedDevNum == *pPciAgentsNum) + { + DB(mvOsPrintf("mvPciScan: ERR. array passed too small \n")); + return MV_ERROR; + } + + /* check the detected device if it is a multi functional device then + scan all device functions*/ + if (pPciDevice->isMultiFunction == MV_TRUE) + { + /* start with function number 1 because we have already detected + function 0 */ + for (funcIndex=1; funcIndexfuntionsNum++; + detectedDevNum++; + + /* check if we have no more room for a new device */ + if (detectedDevNum == *pPciAgentsNum) + { + DB(mvOsPrintf("mvPciScan: ERR. Array too small\n")); + return MV_ERROR; + } + + + } + } + + } + + } + + /* return the number of devices actually detected on the bus ! */ + *pPciAgentsNum = detectedDevNum; + + return MV_OK; + +} + + +/******************************************************************************* +* pciDetectDevice - Detect a pci device parameters +* +* DESCRIPTION: +* This function detect if a pci agent exist on certain address ! +* and if exists then it fills all possible information on the +* agent +* +* INPUT: +* pciIf - PCI Interface +* bus - Bus number +* dev - Device number +* func - Function number +* +* +* +* OUTPUT: +* pPciAgent - pointer to the pci agent filled with its information +* +* RETURN: +* MV_ERROR if no device , MV_OK otherwise +* +*******************************************************************************/ + +static MV_STATUS pciDetectDevice(MV_U32 pciIf, + MV_U32 bus, + MV_U32 dev, + MV_U32 func, + MV_PCI_DEVICE *pPciAgent) +{ + MV_U32 pciData; + + /* no Parameters checking ! because it is static function and it is assumed + that all parameters were checked in the calling function */ + + + /* Try read the PCI Vendor ID and Device ID */ + + /* We will scan only ourselves and the PCI slots that exist on the + board, because we may have a case that we have one slot that has + a Cardbus connector, and because CardBus answers all IDsels we want + to scan only this slot and ourseleves. + + */ + #if defined(MV_INCLUDE_PCI) + if ((PCI_IF_TYPE_CONVEN_PCIX == mvPciIfTypeGet(pciIf)) && + (DB_88F5181_DDR1_PRPMC != mvBoardIdGet()) && + (DB_88F5181_DDR1_PEXPCI != mvBoardIdGet()) && + (DB_88F5181_DDR1_MNG != mvBoardIdGet())) + { + + if (mvBoardIsOurPciSlot(bus, dev) == MV_FALSE) + { + return MV_ERROR; + } + } + #endif /* defined(MV_INCLUDE_PCI) */ + + pciData = mvPciIfConfigRead(pciIf, bus,dev,func, PCI_DEVICE_AND_VENDOR_ID); + + if (PCI_ERROR_CODE == pciData) + { + /* no device exist */ + return MV_ERROR; + } + + /* we are here ! means a device is detected */ + + /* fill basic information */ + pPciAgent->busNumber=bus; + pPciAgent->deviceNum=dev; + pPciAgent->function=func; + + /* Fill the PCI Vendor ID and Device ID */ + + pPciAgent->venID = (pciData & PDVIR_VEN_ID_MASK) >> PDVIR_VEN_ID_OFFS; + pPciAgent->deviceID = (pciData & PDVIR_DEV_ID_MASK) >> PDVIR_DEV_ID_OFFS; + + /* Read Status and command */ + pciData = mvPciIfConfigRead(pciIf, + bus,dev,func, + PCI_STATUS_AND_COMMAND); + + + /* Fill related Status and Command information*/ + + if (pciData & PSCR_TAR_FAST_BB) + { + pPciAgent->isFastB2BCapable = MV_TRUE; + } + else + { + pPciAgent->isFastB2BCapable = MV_FALSE; + } + + if (pciData & PSCR_CAP_LIST) + { + pPciAgent->isCapListSupport=MV_TRUE; + } + else + { + pPciAgent->isCapListSupport=MV_FALSE; + } + + if (pciData & PSCR_66MHZ_EN) + { + pPciAgent->is66MHZCapable=MV_TRUE; + } + else + { + pPciAgent->is66MHZCapable=MV_FALSE; + } + + /* Read Class Code and Revision */ + pciData = mvPciIfConfigRead(pciIf, + bus,dev,func, + PCI_CLASS_CODE_AND_REVISION_ID); + + + pPciAgent->baseClassCode = + (pciData & PCCRIR_BASE_CLASS_MASK) >> PCCRIR_BASE_CLASS_OFFS; + + pPciAgent->subClassCode = + (pciData & PCCRIR_SUB_CLASS_MASK) >> PCCRIR_SUB_CLASS_OFFS; + + pPciAgent->progIf = + (pciData & PCCRIR_PROGIF_MASK) >> PCCRIR_PROGIF_OFFS; + + pPciAgent->revisionID = + (pciData & PCCRIR_REVID_MASK) >> PCCRIR_REVID_OFFS; + + /* Read PCI_BIST_HDR_TYPE_LAT_TMR_CACHE_LINE */ + pciData = mvPciIfConfigRead(pciIf, + bus,dev,func, + PCI_BIST_HDR_TYPE_LAT_TMR_CACHE_LINE); + + + + pPciAgent->pciCacheLine= + (pciData & PBHTLTCLR_CACHELINE_MASK ) >> PBHTLTCLR_CACHELINE_OFFS; + pPciAgent->pciLatencyTimer= + (pciData & PBHTLTCLR_LATTIMER_MASK) >> PBHTLTCLR_LATTIMER_OFFS; + + switch (pciData & PBHTLTCLR_HEADER_MASK) + { + case PBHTLTCLR_HEADER_STANDARD: + + pPciAgent->pciHeader=MV_PCI_STANDARD; + break; + case PBHTLTCLR_HEADER_PCI2PCI_BRIDGE: + + pPciAgent->pciHeader=MV_PCI_PCI2PCI_BRIDGE; + break; + + } + + if (pciData & PBHTLTCLR_MULTI_FUNC) + { + pPciAgent->isMultiFunction=MV_TRUE; + } + else + { + pPciAgent->isMultiFunction=MV_FALSE; + } + + if (pciData & PBHTLTCLR_BISTCAP) + { + pPciAgent->isBISTCapable=MV_TRUE; + } + else + { + pPciAgent->isBISTCapable=MV_FALSE; + } + + + /* read this device pci bars */ + + pciDetectDeviceBars(pciIf, + bus,dev,func, + pPciAgent); + + + /* check if we are bridge*/ + if ((pPciAgent->baseClassCode == PCI_BRIDGE_CLASS)&& + (pPciAgent->subClassCode == P2P_BRIDGE_SUB_CLASS_CODE)) + { + + /* Read P2P_BUSSES_NUM */ + pciData = mvPciIfConfigRead(pciIf, + bus,dev,func, + P2P_BUSSES_NUM); + + pPciAgent->p2pPrimBusNum = + (pciData & PBM_PRIME_BUS_NUM_MASK) >> PBM_PRIME_BUS_NUM_OFFS; + + pPciAgent->p2pSecBusNum = + (pciData & PBM_SEC_BUS_NUM_MASK) >> PBM_SEC_BUS_NUM_OFFS; + + pPciAgent->p2pSubBusNum = + (pciData & PBM_SUB_BUS_NUM_MASK) >> PBM_SUB_BUS_NUM_OFFS; + + pPciAgent->p2pSecLatencyTimer = + (pciData & PBM_SEC_LAT_TMR_MASK) >> PBM_SEC_LAT_TMR_OFFS; + + /* Read P2P_IO_BASE_LIMIT_SEC_STATUS */ + pciData = mvPciIfConfigRead(pciIf, + bus,dev,func, + P2P_IO_BASE_LIMIT_SEC_STATUS); + + pPciAgent->p2pSecStatus = + (pciData & PIBLSS_SEC_STATUS_MASK) >> PIBLSS_SEC_STATUS_OFFS; + + + pPciAgent->p2pIObase = + (pciData & PIBLSS_IO_BASE_MASK) << PIBLSS_IO_LIMIT_OFFS; + + /* clear low address (should be zero)*/ + pPciAgent->p2pIObase &= PIBLSS_HIGH_ADDR_MASK; + + pPciAgent->p2pIOLimit = + (pciData & PIBLSS_IO_LIMIT_MASK); + + /* fill low address with 0xfff */ + pPciAgent->p2pIOLimit |= PIBLSS_LOW_ADDR_MASK; + + + switch ((pciData & PIBLSS_ADD_CAP_MASK) >> PIBLSS_ADD_CAP_OFFS) + { + case PIBLSS_ADD_CAP_16BIT: + + pPciAgent->bIO32 = MV_FALSE; + + break; + case PIBLSS_ADD_CAP_32BIT: + + pPciAgent->bIO32 = MV_TRUE; + + /* Read P2P_IO_BASE_LIMIT_UPPER_16 */ + pciData = mvPciIfConfigRead(pciIf, + bus,dev,func, + P2P_IO_BASE_LIMIT_UPPER_16); + + pPciAgent->p2pIObase |= + (pciData & PRBU_IO_UPP_BASE_MASK) << PRBU_IO_UPP_LIMIT_OFFS; + + + pPciAgent->p2pIOLimit |= + (pciData & PRBU_IO_UPP_LIMIT_MASK); + + break; + + } + + + /* Read P2P_MEM_BASE_LIMIT */ + pciData = mvPciIfConfigRead(pciIf, + bus,dev,func, + P2P_MEM_BASE_LIMIT); + + pPciAgent->p2pMemBase = + (pciData & PMBL_MEM_BASE_MASK) << PMBL_MEM_LIMIT_OFFS; + + /* clear low address */ + pPciAgent->p2pMemBase &= PMBL_HIGH_ADDR_MASK; + + pPciAgent->p2pMemLimit = + (pciData & PMBL_MEM_LIMIT_MASK); + + /* add 0xfffff */ + pPciAgent->p2pMemLimit |= PMBL_LOW_ADDR_MASK; + + + /* Read P2P_PREF_MEM_BASE_LIMIT */ + pciData = mvPciIfConfigRead(pciIf, + bus,dev,func, + P2P_PREF_MEM_BASE_LIMIT); + + + pPciAgent->p2pPrefMemBase = + (pciData & PRMBL_PREF_MEM_BASE_MASK) << PRMBL_PREF_MEM_LIMIT_OFFS; + + /* get high address only */ + pPciAgent->p2pPrefMemBase &= PRMBL_HIGH_ADDR_MASK; + + + + pPciAgent->p2pPrefMemLimit = + (pciData & PRMBL_PREF_MEM_LIMIT_MASK); + + /* add 0xfffff */ + pPciAgent->p2pPrefMemLimit |= PRMBL_LOW_ADDR_MASK; + + switch (pciData & PRMBL_ADD_CAP_MASK) + { + case PRMBL_ADD_CAP_32BIT: + + pPciAgent->bPrefMem64 = MV_FALSE; + + /* Read P2P_PREF_BASE_UPPER_32 */ + pPciAgent->p2pPrefBaseUpper32Bits = 0; + + /* Read P2P_PREF_LIMIT_UPPER_32 */ + pPciAgent->p2pPrefLimitUpper32Bits = 0; + + break; + case PRMBL_ADD_CAP_64BIT: + + pPciAgent->bPrefMem64 = MV_TRUE; + + /* Read P2P_PREF_BASE_UPPER_32 */ + pPciAgent->p2pPrefBaseUpper32Bits = mvPciIfConfigRead(pciIf, + bus,dev,func, + P2P_PREF_BASE_UPPER_32); + + /* Read P2P_PREF_LIMIT_UPPER_32 */ + pPciAgent->p2pPrefLimitUpper32Bits = mvPciIfConfigRead(pciIf, + bus,dev,func, + P2P_PREF_LIMIT_UPPER_32); + + break; + + } + + } + else /* no bridge */ + { + /* Read PCI_SUBSYS_ID_AND_SUBSYS_VENDOR_ID */ + pciData = mvPciIfConfigRead(pciIf, + bus,dev,func, + PCI_SUBSYS_ID_AND_SUBSYS_VENDOR_ID); + + + pPciAgent->subSysVenID = + (pciData & PSISVIR_VENID_MASK) >> PSISVIR_VENID_OFFS; + pPciAgent->subSysID = + (pciData & PSISVIR_DEVID_MASK) >> PSISVIR_DEVID_OFFS; + + + /* Read PCI_EXPANSION_ROM_BASE_ADDR_REG */ + pciData = mvPciIfConfigRead(pciIf, + bus,dev,func, + PCI_EXPANSION_ROM_BASE_ADDR_REG); + + + if (pciData & PERBAR_EXPROMEN) + { + pPciAgent->isExpRom = MV_TRUE; + } + else + { + pPciAgent->isExpRom = MV_FALSE; + } + + pPciAgent->expRomAddr = + (pciData & PERBAR_BASE_MASK) >> PERBAR_BASE_OFFS; + + } + + + if (MV_TRUE == pPciAgent->isCapListSupport) + { + /* Read PCI_CAPABILTY_LIST_POINTER */ + pciData = mvPciIfConfigRead(pciIf, + bus,dev,func, + PCI_CAPABILTY_LIST_POINTER); + + pPciAgent->capListPointer = + (pciData & PCLPR_CAPPTR_MASK) >> PCLPR_CAPPTR_OFFS; + + } + + /* Read PCI_INTERRUPT_PIN_AND_LINE */ + pciData = mvPciIfConfigRead(pciIf, + bus,dev,func, + PCI_INTERRUPT_PIN_AND_LINE); + + + pPciAgent->irqLine= + (pciData & PIPLR_INTLINE_MASK) >> PIPLR_INTLINE_OFFS; + + pPciAgent->intPin= + (MV_PCI_INT_PIN)(pciData & PIPLR_INTPIN_MASK) >> PIPLR_INTPIN_OFFS; + + pPciAgent->minGrant= + (pciData & PIPLR_MINGRANT_MASK) >> PIPLR_MINGRANT_OFFS; + pPciAgent->maxLatency= + (pciData & PIPLR_MAXLATEN_MASK) >> PIPLR_MAXLATEN_OFFS; + + mvPciClassNameGet(pPciAgent->baseClassCode, + (MV_8 *)pPciAgent->type); + + return MV_OK; + + +} + +/******************************************************************************* +* pciDetectDeviceBars - Detect a pci device bars +* +* DESCRIPTION: +* This function detects all pci agent bars +* +* INPUT: +* pciIf - PCI Interface +* bus - Bus number +* dev - Device number +* func - Function number +* +* +* +* OUTPUT: +* pPciAgent - pointer to the pci agent filled with its information +* +* RETURN: +* detected bars number +* +*******************************************************************************/ +static MV_U32 pciDetectDeviceBars(MV_U32 pciIf, + MV_U32 bus, + MV_U32 dev, + MV_U32 func, + MV_PCI_DEVICE *pPciAgent) +{ + MV_U32 pciData,barIndex,detectedBar=0; + MV_U32 tmpBaseHigh=0,tmpBaseLow=0; + MV_U32 pciMaxBars=0; + + pPciAgent->barsNum=0; + + /* check if we are bridge*/ + if ((pPciAgent->baseClassCode == PCI_BRIDGE_CLASS)&& + (pPciAgent->subClassCode == P2P_BRIDGE_SUB_CLASS_CODE)) + { + pciMaxBars = 2; + } + else /* no bridge */ + { + pciMaxBars = 6; + } + + /* read this device pci bars */ + for (barIndex = 0 ; barIndex < pciMaxBars ; barIndex++ ) + { + /* Read PCI_MEMORY_BAR_BASE_ADDR */ + tmpBaseLow = pciData = mvPciIfConfigRead(pciIf, + bus,dev,func, + PCI_MEMORY_BAR_BASE_ADDR(barIndex)); + + pPciAgent->pciBar[detectedBar].barOffset = + PCI_MEMORY_BAR_BASE_ADDR(barIndex); + + /* check if the bar is 32bit or 64bit bar */ + switch (pciData & PBBLR_TYPE_MASK) + { + case PBBLR_TYPE_32BIT_ADDR: + pPciAgent->pciBar[detectedBar].barType = PCI_32BIT_BAR; + break; + case PBBLR_TYPE_64BIT_ADDR: + pPciAgent->pciBar[detectedBar].barType = PCI_64BIT_BAR; + break; + + } + + /* check if it is memory or IO bar */ + if (pciData & PBBLR_IOSPACE) + { + pPciAgent->pciBar[detectedBar].barMapping=PCI_IO_BAR; + } + else + { + pPciAgent->pciBar[detectedBar].barMapping=PCI_MEMORY_BAR; + } + + /* if it is memory bar then check if it is prefetchable */ + if (PCI_MEMORY_BAR == pPciAgent->pciBar[detectedBar].barMapping) + { + if (pciData & PBBLR_PREFETCH_EN) + { + pPciAgent->pciBar[detectedBar].isPrefetchable = MV_TRUE; + } + else + { + pPciAgent->pciBar[detectedBar].isPrefetchable = MV_FALSE; + } + + pPciAgent->pciBar[detectedBar].barBaseLow = + pciData & PBBLR_MEM_BASE_MASK; + + + } + else /* IO Bar */ + { + pPciAgent->pciBar[detectedBar].barBaseLow = + pciData & PBBLR_IO_BASE_MASK; + + } + + pPciAgent->pciBar[detectedBar].barBaseHigh=0; + + if (PCI_64BIT_BAR == pPciAgent->pciBar[detectedBar].barType) + { + barIndex++; + + tmpBaseHigh = pPciAgent->pciBar[detectedBar].barBaseHigh = + mvPciIfConfigRead(pciIf, + bus,dev,func, + PCI_MEMORY_BAR_BASE_ADDR(barIndex)); + + + } + + /* calculating full base address (64bit) */ + pPciAgent->pciBar[detectedBar].barBaseAddr = + (MV_U64)pPciAgent->pciBar[detectedBar].barBaseHigh; + + pPciAgent->pciBar[detectedBar].barBaseAddr <<= 32; + + pPciAgent->pciBar[detectedBar].barBaseAddr |= + (MV_U64)pPciAgent->pciBar[detectedBar].barBaseLow; + + + + /* get the sizes of the the bar */ + + pPciAgent->pciBar[detectedBar].barSizeHigh=0; + + if ((PCI_64BIT_BAR == pPciAgent->pciBar[detectedBar].barType) && + (PCI_MEMORY_BAR == pPciAgent->pciBar[detectedBar].barMapping)) + + { + /* write oxffffffff to the bar to get the size */ + /* start with sizelow ( original value was saved in tmpBaseLow ) */ + mvPciIfConfigWrite(pciIf, + bus,dev,func, + PCI_MEMORY_BAR_BASE_ADDR(barIndex-1), + 0xffffffff); + + /* read size */ + pPciAgent->pciBar[detectedBar].barSizeLow = + mvPciIfConfigRead(pciIf, + bus,dev,func, + PCI_MEMORY_BAR_BASE_ADDR(barIndex-1)); + + + + /* restore original value */ + mvPciIfConfigWrite(pciIf, + bus,dev,func, + PCI_MEMORY_BAR_BASE_ADDR(barIndex-1), + tmpBaseLow); + + + /* now do the same for BaseHigh */ + + /* write oxffffffff to the bar to get the size */ + mvPciIfConfigWrite(pciIf, + bus,dev,func, + PCI_MEMORY_BAR_BASE_ADDR(barIndex), + 0xffffffff); + + /* read size */ + pPciAgent->pciBar[detectedBar].barSizeHigh = + mvPciIfConfigRead(pciIf, + bus,dev,func, + PCI_MEMORY_BAR_BASE_ADDR(barIndex)); + + /* restore original value */ + mvPciIfConfigWrite(pciIf, + bus,dev,func, + PCI_MEMORY_BAR_BASE_ADDR(barIndex), + tmpBaseHigh); + + if ((0 == pPciAgent->pciBar[detectedBar].barSizeLow)&& + (0 == pPciAgent->pciBar[detectedBar].barSizeHigh)) + { + /* this bar is not applicable for this device, + ignore all previous settings and check the next bar*/ + + /* we though this was a 64bit bar , and it seems this + was wrong ! so decrement barIndex */ + barIndex--; + continue; + } + + /* calculate the full 64 bit size */ + + if (0 != pPciAgent->pciBar[detectedBar].barSizeHigh) + { + pPciAgent->pciBar[detectedBar].barSizeLow &= PBBLR_MEM_BASE_MASK; + + pPciAgent->pciBar[detectedBar].barSizeLow = + ~pPciAgent->pciBar[detectedBar].barSizeLow + 1; + + pPciAgent->pciBar[detectedBar].barSizeHigh = 0; + + } + else + { + + pPciAgent->pciBar[detectedBar].barSizeLow &= PBBLR_MEM_BASE_MASK; + + pPciAgent->pciBar[detectedBar].barSizeLow = + ~pPciAgent->pciBar[detectedBar].barSizeLow + 1; + + pPciAgent->pciBar[detectedBar].barSizeHigh = 0; + + } + + + + } + else /* 32bit bar */ + { + /* write oxffffffff to the bar to get the size */ + mvPciIfConfigWrite(pciIf, + bus,dev,func, + PCI_MEMORY_BAR_BASE_ADDR(barIndex), + 0xffffffff); + + /* read size */ + pPciAgent->pciBar[detectedBar].barSizeLow = + mvPciIfConfigRead(pciIf, + bus,dev,func, + PCI_MEMORY_BAR_BASE_ADDR(barIndex)); + + if (0 == pPciAgent->pciBar[detectedBar].barSizeLow) + { + /* this bar is not applicable for this device, + ignore all previous settings and check the next bar*/ + continue; + } + + + /* restore original value */ + mvPciIfConfigWrite(pciIf, + bus,dev,func, + PCI_MEMORY_BAR_BASE_ADDR(barIndex), + tmpBaseLow); + + /* calculate size low */ + + if (PCI_MEMORY_BAR == pPciAgent->pciBar[detectedBar].barMapping) + { + pPciAgent->pciBar[detectedBar].barSizeLow &= PBBLR_MEM_BASE_MASK; + } + else + { + pPciAgent->pciBar[detectedBar].barSizeLow &= PBBLR_IO_BASE_MASK; + } + + pPciAgent->pciBar[detectedBar].barSizeLow = + ~pPciAgent->pciBar[detectedBar].barSizeLow + 1; + + pPciAgent->pciBar[detectedBar].barSizeHigh = 0; + pPciAgent->pciBar[detectedBar].barSize = + (MV_U64)pPciAgent->pciBar[detectedBar].barSizeLow; + + + } + + /* we are here ! this means we have already detected a bar for + this device , now move on */ + + detectedBar++; + pPciAgent->barsNum++; + } + + return detectedBar; +} + + +/******************************************************************************* +* mvPciClassNameGet - get PCI class name +* +* DESCRIPTION: +* This function returns the PCI class name +* +* INPUT: +* baseClassCode - Base Class Code. +* +* OUTPUT: +* pType - the class name +* +* RETURN: +* MV_BAD_PARAM for bad parameters ,MV_ERROR on error ! otherwise MV_OK +* +*******************************************************************************/ +MV_STATUS mvPciClassNameGet(MV_U32 baseClassCode, MV_8 *pType) +{ + + switch(baseClassCode) + { + case 0x0: + strcpy(pType,"Old generation device"); + break; + case 0x1: + strcpy(pType,"Mass storage controller"); + break; + case 0x2: + strcpy(pType,"Network controller"); + break; + case 0x3: + strcpy(pType,"Display controller"); + break; + case 0x4: + strcpy(pType,"Multimedia device"); + break; + case 0x5: + strcpy(pType,"Memory controller"); + break; + case 0x6: + strcpy(pType,"Bridge Device"); + break; + case 0x7: + strcpy(pType,"Simple Communication controllers"); + break; + case 0x8: + strcpy(pType,"Base system peripherals"); + break; + case 0x9: + strcpy(pType,"Input Devices"); + break; + case 0xa: + strcpy(pType,"Docking stations"); + break; + case 0xb: + strcpy(pType,"Processors"); + break; + case 0xc: + strcpy(pType,"Serial bus controllers"); + break; + case 0xd: + strcpy(pType,"Wireless controllers"); + break; + case 0xe: + strcpy(pType,"Intelligent I/O controllers"); + break; + case 0xf: + strcpy(pType,"Satellite communication controllers"); + break; + case 0x10: + strcpy(pType,"Encryption/Decryption controllers"); + break; + case 0x11: + strcpy(pType,"Data acquisition and signal processing controllers"); + break; + default: + strcpy(pType,"Unknown device"); + break; + } + + return MV_OK; + +} + + + diff --git a/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/mv_hal/pci-if/pci_util/mvPciUtils.h b/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/mv_hal/pci-if/pci_util/mvPciUtils.h new file mode 100644 index 0000000000..2ee0b1738b --- /dev/null +++ b/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/mv_hal/pci-if/pci_util/mvPciUtils.h @@ -0,0 +1,323 @@ +/******************************************************************************* +Copyright (C) Marvell International Ltd. and its affiliates + +This software file (the "File") is owned and distributed by Marvell +International Ltd. and/or its affiliates ("Marvell") under the following +alternative licensing terms. Once you have made an election to distribute the +File under one of the following license alternatives, please (i) delete this +introductory statement regarding license alternatives, (ii) delete the two +license alternatives that you have not elected to use and (iii) preserve the +Marvell copyright notice above. + +******************************************************************************** +Marvell Commercial License Option + +If you received this File from Marvell and you have entered into a commercial +license agreement (a "Commercial License") with Marvell, the File is licensed +to you under the terms of the applicable Commercial License. + +******************************************************************************** +Marvell GPL License Option + +If you received this File from Marvell, you may opt to use, redistribute and/or +modify this File in accordance with the terms and conditions of the General +Public License Version 2, June 1991 (the "GPL License"), a copy of which is +available along with the File in the license.txt file or by writing to the Free +Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or +on the worldwide web at http://www.gnu.org/licenses/gpl.txt. + +THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED +WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY +DISCLAIMED. The GPL License provides additional details about this warranty +disclaimer. +******************************************************************************** +Marvell BSD License Option + +If you received this File from Marvell, you may opt to use, redistribute and/or +modify this File under the following licensing terms. +Redistribution and use in source and binary forms, with or without modification, +are permitted provided that the following conditions are met: + + * Redistributions of source code must retain the above copyright notice, + this list of conditions and the following disclaimer. + + * Redistributions in binary form must reproduce the above copyright + notice, this list of conditions and the following disclaimer in the + documentation and/or other materials provided with the distribution. + + * Neither the name of Marvell nor the names of its contributors may be + used to endorse or promote products derived from this software without + specific prior written permission. + +THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND +ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED +WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE +DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR +ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES +(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; +LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON +ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS +SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + +*******************************************************************************/ + +#ifndef __INCmvPciUtilsh +#define __INCmvPciUtilsh + +/* +This module only support scanning of Header type 00h of pci devices +There is no suppotr for Header type 01h of pci devices ( PCI bridges ) +*/ + +/* includes */ +#include "mvSysHwConfig.h" +#include "pci-if/mvPciIf.h" +#include "pci/mvPciRegs.h" + + + +/* PCI base address low bar mask */ +#define PCI_ERROR_CODE 0xffffffff + +#define PCI_BRIDGE_CLASS 0x6 +#define P2P_BRIDGE_SUB_CLASS_CODE 0x4 + + +#define P2P_BUSSES_NUM 0x18 +#define P2P_IO_BASE_LIMIT_SEC_STATUS 0x1C +#define P2P_MEM_BASE_LIMIT 0x20 +#define P2P_PREF_MEM_BASE_LIMIT 0x24 +#define P2P_PREF_BASE_UPPER_32 0x28 +#define P2P_PREF_LIMIT_UPPER_32 0x2C +#define P2P_IO_BASE_LIMIT_UPPER_16 0x30 +#define P2P_EXP_ROM 0x38 + +/* P2P_BUSSES_NUM (PBM) */ + +#define PBM_PRIME_BUS_NUM_OFFS 0 +#define PBM_PRIME_BUS_NUM_MASK (0xff << PBM_PRIME_BUS_NUM_OFFS) + +#define PBM_SEC_BUS_NUM_OFFS 8 +#define PBM_SEC_BUS_NUM_MASK (0xff << PBM_SEC_BUS_NUM_OFFS) + +#define PBM_SUB_BUS_NUM_OFFS 16 +#define PBM_SUB_BUS_NUM_MASK (0xff << PBM_SUB_BUS_NUM_OFFS) + +#define PBM_SEC_LAT_TMR_OFFS 24 +#define PBM_SEC_LAT_TMR_MASK (0xff << PBM_SEC_LAT_TMR_OFFS) + +/* P2P_IO_BASE_LIMIT_SEC_STATUS (PIBLSS) */ + +#define PIBLSS_IO_BASE_OFFS 0 +#define PIBLSS_IO_BASE_MASK (0xff << PIBLSS_IO_BASE_OFFS) + +#define PIBLSS_ADD_CAP_OFFS 0 +#define PIBLSS_ADD_CAP_MASK (0x3 << PIBLSS_ADD_CAP_OFFS) +#define PIBLSS_ADD_CAP_16BIT (0x0 << PIBLSS_ADD_CAP_OFFS) +#define PIBLSS_ADD_CAP_32BIT (0x1 << PIBLSS_ADD_CAP_OFFS) + +#define PIBLSS_LOW_ADDR_OFFS 0 +#define PIBLSS_LOW_ADDR_MASK (0xFFF << PIBLSS_LOW_ADDR_OFFS) + +#define PIBLSS_HIGH_ADDR_OFFS 12 +#define PIBLSS_HIGH_ADDR_MASK (0xF << PIBLSS_HIGH_ADDR_OFFS) + +#define PIBLSS_IO_LIMIT_OFFS 8 +#define PIBLSS_IO_LIMIT_MASK (0xff << PIBLSS_IO_LIMIT_OFFS) + +#define PIBLSS_SEC_STATUS_OFFS 16 +#define PIBLSS_SEC_STATUS_MASK (0xffff << PIBLSS_SEC_STATUS_OFFS) + + +/* P2P_MEM_BASE_LIMIT (PMBL)*/ + +#define PMBL_MEM_BASE_OFFS 0 +#define PMBL_MEM_BASE_MASK (0xffff << PMBL_MEM_BASE_OFFS) + +#define PMBL_MEM_LIMIT_OFFS 16 +#define PMBL_MEM_LIMIT_MASK (0xffff << PMBL_MEM_LIMIT_OFFS) + + +#define PMBL_LOW_ADDR_OFFS 0 +#define PMBL_LOW_ADDR_MASK (0xFFFFF << PMBL_LOW_ADDR_OFFS) + +#define PMBL_HIGH_ADDR_OFFS 20 +#define PMBL_HIGH_ADDR_MASK (0xFFF << PMBL_HIGH_ADDR_OFFS) + + +/* P2P_PREF_MEM_BASE_LIMIT (PRMBL) */ + +#define PRMBL_PREF_MEM_BASE_OFFS 0 +#define PRMBL_PREF_MEM_BASE_MASK (0xffff << PRMBL_PREF_MEM_BASE_OFFS) + +#define PRMBL_PREF_MEM_LIMIT_OFFS 16 +#define PRMBL_PREF_MEM_LIMIT_MASK (0xffff<= mvCtrlPciMaxIfGet()) + { + mvOsPrintf("mvPciCommandSet: ERR. Invalid PCI IF num %d\n", pciIf); + return MV_BAD_PARAM; + } + + /* Set command register */ + MV_REG_WRITE(PCI_CMD_REG(pciIf), command); + + /* Upodate device max outstanding split tarnsaction */ + if ((command & PCR_CPU_TO_PCI_ORDER_EN) && + (command & PCR_PCI_TO_CPU_ORDER_EN)) + { + /* Read PCI-X command register */ + regVal = mvPciConfigRead (pciIf, locBusNum, locDevNum, 0, PCIX_COMMAND); + + /* clear bits 22:20 */ + regVal &= 0xff8fffff; + + /* set reset value */ + regVal |= (0x3 << 20); + + /* Write back the value */ + mvPciConfigWrite (pciIf, locBusNum, locDevNum, 0, PCIX_COMMAND, regVal); + } + + return MV_OK; + + +} + + +/******************************************************************************* +* mvPciModeGet - Get PCI interface mode. +* +* DESCRIPTION: +* This function returns the given PCI interface mode. +* +* INPUT: +* pciIf - PCI interface number. +* +* OUTPUT: +* pPciMode - Pointer to PCI mode structure. +* +* RETURN: +* MV_BAD_PARAM for bad parameters ,MV_ERROR on error ! otherwise MV_OK +* +*******************************************************************************/ +MV_STATUS mvPciModeGet(MV_U32 pciIf, MV_PCI_MODE *pPciMode) +{ + MV_U32 pciMode; + + /* Parameter checking */ + if (pciIf >= mvCtrlPciMaxIfGet()) + { + mvOsPrintf("mvPciModeGet: ERR. Invalid PCI interface %d\n", pciIf); + return MV_BAD_PARAM; + } + if (NULL == pPciMode) + { + mvOsPrintf("mvPciModeGet: ERR. pPciMode = NULL \n"); + return MV_BAD_PARAM; + } + + /* Read pci mode register */ + pciMode = MV_REG_READ(PCI_MODE_REG(pciIf)); + + switch (pciMode & PMR_PCI_MODE_MASK) + { + case PMR_PCI_MODE_CONV: + pPciMode->pciType = MV_PCI_CONV; + + if (MV_REG_READ(PCI_DLL_CTRL_REG(pciIf)) & PDC_DLL_EN) + { + pPciMode->pciSpeed = 66000000; /* 66MHZ */ + } + else + { + pPciMode->pciSpeed = 33000000; /* 33MHZ */ + } + + break; + + case PMR_PCI_MODE_PCIX_66MHZ: + pPciMode->pciType = MV_PCIX; + pPciMode->pciSpeed = 66000000; /* 66MHZ */ + break; + + case PMR_PCI_MODE_PCIX_100MHZ: + pPciMode->pciType = MV_PCIX; + pPciMode->pciSpeed = 100000000; /* 100MHZ */ + break; + + case PMR_PCI_MODE_PCIX_133MHZ: + pPciMode->pciType = MV_PCIX; + pPciMode->pciSpeed = 133000000; /* 133MHZ */ + break; + + default: + { + mvOsPrintf("mvPciModeGet: ERR. Non existing mode !!\n"); + return MV_ERROR; + } + } + + switch (pciMode & PMR_PCI_64_MASK) + { + case PMR_PCI_64_64BIT: + pPciMode->pciWidth = MV_PCI_64; + break; + + case PMR_PCI_64_32BIT: + pPciMode->pciWidth = MV_PCI_32; + break; + + default: + { + mvOsPrintf("mvPciModeGet: ERR. Non existing mode !!\n"); + return MV_ERROR; + } + } + + return MV_OK; +} + +/******************************************************************************* +* mvPciRetrySet - Set PCI retry counters +* +* DESCRIPTION: +* This function specifies the number of times the PCI controller +* retries a transaction before it quits. +* Applies to the PCI Master when acting as a requester. +* Applies to the PCI slave when acting as a completer (PCI-X mode). +* A 0x00 value means a "retry forever". +* +* INPUT: +* pciIf - PCI interface number. +* counter - Number of times PCI controller retry. Use counter value +* up to PRR_RETRY_CNTR_MAX. +* +* OUTPUT: +* None. +* +* RETURN: +* MV_BAD_PARAM for bad parameters ,MV_ERROR on error ! otherwise MV_OK +* +*******************************************************************************/ +MV_STATUS mvPciRetrySet(MV_U32 pciIf, MV_U32 counter) +{ + MV_U32 pciRetry; + + /* Parameter checking */ + if (pciIf >= mvCtrlPciMaxIfGet()) + { + mvOsPrintf("mvPciRetrySet: ERR. Invalid PCI interface %d\n", pciIf); + return MV_BAD_PARAM; + } + + if (counter >= PRR_RETRY_CNTR_MAX) + { + mvOsPrintf("mvPciRetrySet: ERR. Invalid counter: %d\n", counter); + return MV_BAD_PARAM; + + } + + /* Reading PCI retry register */ + pciRetry = MV_REG_READ(PCI_RETRY_REG(pciIf)); + + pciRetry &= ~PRR_RETRY_CNTR_MASK; + + pciRetry |= (counter << PRR_RETRY_CNTR_OFFS); + + /* write new value */ + MV_REG_WRITE(PCI_RETRY_REG(pciIf), pciRetry); + + return MV_OK; +} + + +/******************************************************************************* +* mvPciDiscardTimerSet - Set PCI discard timer +* +* DESCRIPTION: +* This function set PCI discard timer. +* In conventional PCI mode: +* Specifies the number of PCLK cycles the PCI slave keeps a non-accessed +* read buffers (non-completed delayed read) before invalidate the buffer. +* Set to '0' to disable the timer. The PCI slave waits for delayed +* read completion forever. +* In PCI-X mode: +* Specifies the number of PCLK cycles the PCI master waits for split +* completion transaction, before it invalidates the pre-allocated read +* buffer. +* Set to '0' to disable the timer. The PCI master waits for split +* completion forever. +* NOTE: Must be set to a number greater than MV_PCI_MAX_DISCARD_CLK, +* unless using the "wait for ever" setting 0x0. +* NOTE: Must not be updated while there are pending read requests. +* +* INPUT: +* pciIf - PCI interface number. +* pClkCycles - Number of PCI clock cycles. +* +* OUTPUT: +* None. +* +* RETURN: +* MV_BAD_PARAM for bad parameters ,MV_ERROR on error ! otherwise MV_OK +* +*******************************************************************************/ +MV_STATUS mvPciDiscardTimerSet(MV_U32 pciIf, MV_U32 pClkCycles) +{ + MV_U32 pciDiscardTimer; + + /* Parameter checking */ + if (pciIf >= mvCtrlPciMaxIfGet()) + { + mvOsPrintf("mvPciDiscardTimerSet: ERR. Invalid PCI interface %d\n", + pciIf); + return MV_BAD_PARAM; + } + + if (pClkCycles >= PDTR_TIMER_MIN) + { + mvOsPrintf("mvPciDiscardTimerSet: ERR. Invalid Clk value: %d\n", + pClkCycles); + return MV_BAD_PARAM; + + } + + /* Read PCI Discard Timer */ + pciDiscardTimer = MV_REG_READ(PCI_DISCARD_TIMER_REG(pciIf)); + + pciDiscardTimer &= ~PDTR_TIMER_MASK; + + pciDiscardTimer |= (pClkCycles << PDTR_TIMER_OFFS); + + /* Write new value */ + MV_REG_WRITE(PCI_DISCARD_TIMER_REG(pciIf), pciDiscardTimer); + + return MV_OK; + +} + +/* PCI Arbiter routines */ + +/******************************************************************************* +* mvPciArbEnable - PCI arbiter enable/disable +* +* DESCRIPTION: +* This fuction enable/disables a given PCI interface arbiter. +* NOTE: Arbiter setting can not be changed while in work. It should only +* be set once. +* INPUT: +* pciIf - PCI interface number. +* enable - Enable/disable parameter. If enable = MV_TRUE then enable. +* +* OUTPUT: +* None. +* +* RETURN: +* None. +* +*******************************************************************************/ +MV_STATUS mvPciArbEnable(MV_U32 pciIf, MV_BOOL enable) +{ + MV_U32 regVal; + + /* Parameter checking */ + if (pciIf >= mvCtrlPciMaxIfGet()) + { + mvOsPrintf("mvPciArbEnable: ERR. Invalid PCI interface %d\n", pciIf); + return MV_ERROR; + } + + /* Set PCI Arbiter Control register according to default configuration */ + regVal = MV_REG_READ(PCI_ARBITER_CTRL_REG(pciIf)); + + /* Make sure arbiter disabled before changing its values */ + MV_REG_BIT_RESET(PCI_ARBITER_CTRL_REG(pciIf), PACR_ARB_ENABLE); + + regVal &= ~PCI_ARBITER_CTRL_DEFAULT_MASK; + + regVal |= PCI_ARBITER_CTRL_DEFAULT; /* Set default configuration */ + + if (MV_TRUE == enable) + { + regVal |= PACR_ARB_ENABLE; + } + else + { + regVal &= ~PACR_ARB_ENABLE; + } + + /* Write to register */ + MV_REG_WRITE(PCI_ARBITER_CTRL_REG(pciIf), regVal); + + return MV_OK; +} + + +/******************************************************************************* +* mvPciArbParkDis - Disable arbiter parking on agent +* +* DESCRIPTION: +* This function disables the PCI arbiter from parking on the given agent +* list. +* +* INPUT: +* pciIf - PCI interface number. +* pciAgentMask - When a bit in the mask is set to '1', parking on +* the associated PCI master is disabled. Mask bit +* refers to bit 0 - 6. For example disable parking on PCI +* agent 3 set pciAgentMask 0x4 (bit 3 is set). +* +* OUTPUT: +* None. +* +* RETURN: +* None. +* +*******************************************************************************/ +MV_STATUS mvPciArbParkDis(MV_U32 pciIf, MV_U32 pciAgentMask) +{ + MV_U32 pciArbiterCtrl; + + /* Parameter checking */ + if (pciIf >= mvCtrlPciMaxIfGet()) + { + mvOsPrintf("mvPciArbParkDis: ERR. Invalid PCI interface %d\n", pciIf); + return MV_ERROR; + } + + /* Reading Arbiter Control register */ + pciArbiterCtrl = MV_REG_READ(PCI_ARBITER_CTRL_REG(pciIf)); + + /* Arbiter must be disabled before changing parking */ + MV_REG_BIT_RESET(PCI_ARBITER_CTRL_REG(pciIf), PACR_ARB_ENABLE); + + /* do the change */ + pciArbiterCtrl &= ~PACR_PARK_DIS_MASK; + pciArbiterCtrl |= (pciAgentMask << PACR_PARK_DIS_OFFS); + + /* writing new value ( if th earbiter was enabled before the change */ + /* here it will be reenabled */ + MV_REG_WRITE(PCI_ARBITER_CTRL_REG(pciIf), pciArbiterCtrl); + + return MV_OK; +} + + +/******************************************************************************* +* mvPciArbBrokDetectSet - Set PCI arbiter broken detection +* +* DESCRIPTION: +* This function sets the maximum number of cycles that the arbiter +* waits for a PCI master to respond to its grant assertion. If a +* PCI agent fails to respond within this time, the PCI arbiter aborts +* the transaction and performs a new arbitration cycle. +* NOTE: Value must be greater than '1' for conventional PCI and +* greater than '5' for PCI-X. +* +* INPUT: +* pciIf - PCI interface number. +* pClkCycles - Number of PCI clock cycles. If equal to '0' the broken +* master detection is disabled. +* +* OUTPUT: +* None. +* +* RETURN: +* MV_BAD_PARAM for bad parameters ,MV_ERROR on error ! otherwise MV_OK +* +*******************************************************************************/ +MV_STATUS mvPciArbBrokDetectSet(MV_U32 pciIf, MV_U32 pClkCycles) +{ + MV_U32 pciArbiterCtrl; + MV_U32 pciMode; + + /* Parameter checking */ + if (pciIf >= mvCtrlPciMaxIfGet()) + { + mvOsPrintf("mvPciArbBrokDetectSet: ERR. Invalid PCI interface %d\n", + pciIf); + return MV_BAD_PARAM; + } + + /* Checking PCI mode and if pClkCycles is legal value */ + pciMode = MV_REG_READ(PCI_MODE_REG(pciIf)); + pciMode &= PMR_PCI_MODE_MASK; + + if (PMR_PCI_MODE_CONV == pciMode) + { + if (pClkCycles < PACR_BROKEN_VAL_CONV_MIN) + return MV_ERROR; + } + else + { + if (pClkCycles < PACR_BROKEN_VAL_PCIX_MIN) + return MV_ERROR; + } + + pClkCycles <<= PACR_BROKEN_VAL_OFFS; + + /* Reading Arbiter Control register */ + pciArbiterCtrl = MV_REG_READ(PCI_ARBITER_CTRL_REG(pciIf)); + pciArbiterCtrl &= ~PACR_BROKEN_VAL_MASK; + pciArbiterCtrl |= pClkCycles; + + /* Arbiter must be disabled before changing broken detection */ + MV_REG_BIT_RESET(PCI_ARBITER_CTRL_REG(pciIf), PACR_ARB_ENABLE); + + /* writing new value ( if th earbiter was enabled before the change */ + /* here it will be reenabled */ + + MV_REG_WRITE(PCI_ARBITER_CTRL_REG(pciIf), pciArbiterCtrl); + + return MV_OK; +} + +/* PCI configuration space read write */ + +/******************************************************************************* +* mvPciConfigRead - Read from configuration space +* +* DESCRIPTION: +* This function performs a 32 bit read from PCI configuration space. +* It supports both type 0 and type 1 of Configuration Transactions +* (local and over bridge). In order to read from local bus segment, use +* bus number retrieved from mvPciLocalBusNumGet(). Other bus numbers +* will result configuration transaction of type 1 (over bridge). +* +* INPUT: +* pciIf - PCI interface number. +* bus - PCI segment bus number. +* dev - PCI device number. +* func - Function number. +* regOffs - Register offset. +* +* OUTPUT: +* None. +* +* RETURN: +* 32bit register data, 0xffffffff on error +* +*******************************************************************************/ +MV_U32 mvPciConfigRead (MV_U32 pciIf, MV_U32 bus, MV_U32 dev, MV_U32 func, + MV_U32 regOff) +{ + MV_U32 pciData = 0; + + /* Parameter checking */ + if (PCI_DEFAULT_IF != pciIf) + { + if (pciIf >= mvCtrlPciMaxIfGet()) + { + mvOsPrintf("mvPciConfigRead: ERR. Invalid PCI interface %d\n",pciIf); + return 0xFFFFFFFF; + } + } + + if (dev >= MAX_PCI_DEVICES) + { + DB(mvOsPrintf("mvPciConfigRead: ERR. device number illigal %d\n", dev)); + return 0xFFFFFFFF; + } + + if (func >= MAX_PCI_FUNCS) + { + DB(mvOsPrintf("mvPciConfigRead: ERR. function number illigal %d\n", func)); + return 0xFFFFFFFF; + } + + if (bus >= MAX_PCI_BUSSES) + { + DB(mvOsPrintf("mvPciConfigRead: ERR. bus number illigal %d\n", bus)); + return MV_ERROR; + } + + + /* Creating PCI address to be passed */ + pciData |= (bus << PCAR_BUS_NUM_OFFS); + pciData |= (dev << PCAR_DEVICE_NUM_OFFS); + pciData |= (func << PCAR_FUNC_NUM_OFFS); + pciData |= (regOff & PCAR_REG_NUM_MASK); + + pciData |= PCAR_CONFIG_EN; + + /* Write the address to the PCI configuration address register */ + MV_REG_WRITE(PCI_CONFIG_ADDR_REG(pciIf), pciData); + + /* In order to let the PCI controller absorbed the address of the read */ + /* transaction we perform a validity check that the address was written */ + if(pciData != MV_REG_READ(PCI_CONFIG_ADDR_REG(pciIf))) + { + return MV_ERROR; + } + /* Read the Data returned in the PCI Data register */ + pciData = MV_REG_READ(PCI_CONFIG_DATA_REG(pciIf)); + + return pciData; +} + +/******************************************************************************* +* mvPciConfigWrite - Write to configuration space +* +* DESCRIPTION: +* This function performs a 32 bit write to PCI configuration space. +* It supports both type 0 and type 1 of Configuration Transactions +* (local and over bridge). In order to write to local bus segment, use +* bus number retrieved from mvPciLocalBusNumGet(). Other bus numbers +* will result configuration transaction of type 1 (over bridge). +* +* INPUT: +* pciIf - PCI interface number. +* bus - PCI segment bus number. +* dev - PCI device number. +* func - Function number. +* regOffs - Register offset. +* data - 32bit data. +* +* OUTPUT: +* None. +* +* RETURN: +* MV_BAD_PARAM for bad parameters ,MV_ERROR on error ! otherwise MV_OK +* +*******************************************************************************/ +MV_STATUS mvPciConfigWrite(MV_U32 pciIf, MV_U32 bus, MV_U32 dev, + MV_U32 func, MV_U32 regOff, MV_U32 data) +{ + MV_U32 pciData = 0; + + /* Parameter checking */ + if (PCI_DEFAULT_IF != pciIf) + { + if (pciIf >= mvCtrlPciMaxIfGet()) + { + mvOsPrintf("mvPciConfigWrite: ERR. Invalid PCI interface %d\n", + pciIf); + return 0xFFFFFFFF; + } + } + + if (dev >= MAX_PCI_DEVICES) + { + mvOsPrintf("mvPciConfigWrite: ERR. device number illigal %d\n",dev); + return MV_BAD_PARAM; + } + + if (func >= MAX_PCI_FUNCS) + { + mvOsPrintf("mvPciConfigWrite: ERR. function number illigal %d\n", func); + return MV_ERROR; + } + + if (bus >= MAX_PCI_BUSSES) + { + mvOsPrintf("mvPciConfigWrite: ERR. bus number illigal %d\n", bus); + return MV_ERROR; + } + + /* Creating PCI address to be passed */ + pciData |= (bus << PCAR_BUS_NUM_OFFS); + pciData |= (dev << PCAR_DEVICE_NUM_OFFS); + pciData |= (func << PCAR_FUNC_NUM_OFFS); + pciData |= (regOff & PCAR_REG_NUM_MASK); + + pciData |= PCAR_CONFIG_EN; + + /* Write the address to the PCI configuration address register */ + MV_REG_WRITE(PCI_CONFIG_ADDR_REG(pciIf), pciData); + + /* In order to let the PCI controller absorbed the address of the read */ + /* transaction we perform a validity check that the address was written */ + if(pciData != MV_REG_READ(PCI_CONFIG_ADDR_REG(pciIf))) + { + return MV_ERROR; + } + + /* Write the Data passed to the PCI Data register */ + MV_REG_WRITE(PCI_CONFIG_DATA_REG(pciIf), data); + + return MV_OK; +} + +/******************************************************************************* +* mvPciMasterEnable - Enable/disale PCI interface master transactions. +* +* DESCRIPTION: +* This function performs read modified write to PCI command status +* (offset 0x4) to set/reset bit 2. After this bit is set, the PCI +* master is allowed to gain ownership on the bus, otherwise it is +* incapable to do so. +* +* INPUT: +* pciIf - PCI interface number. +* enable - Enable/disable parameter. +* +* OUTPUT: +* None. +* +* RETURN: +* MV_BAD_PARAM for bad parameters ,MV_ERROR on error ! otherwise MV_OK +* +*******************************************************************************/ +MV_STATUS mvPciMasterEnable(MV_U32 pciIf, MV_BOOL enable) +{ + MV_U32 pciCommandStatus; + MV_U32 RegOffs; + MV_U32 localBus; + MV_U32 localDev; + + /* Parameter checking */ + if (pciIf >= mvCtrlPciMaxIfGet()) + { + mvOsPrintf("mvPciMasterEnable: ERR. Invalid PCI interface %d\n", pciIf); + return MV_ERROR; + } + + localBus = mvPciLocalBusNumGet(pciIf); + localDev = mvPciLocalDevNumGet(pciIf); + + RegOffs = PCI_STATUS_AND_COMMAND; + + pciCommandStatus = mvPciConfigRead(pciIf, localBus, localDev, 0, RegOffs); + + if (MV_TRUE == enable) + { + pciCommandStatus |= PSCR_MASTER_EN; + } + else + { + pciCommandStatus &= ~PSCR_MASTER_EN; + } + + mvPciConfigWrite(pciIf, localBus, localDev, 0, RegOffs, pciCommandStatus); + + return MV_OK; +} + + +/******************************************************************************* +* mvPciSlaveEnable - Enable/disale PCI interface slave transactions. +* +* DESCRIPTION: +* This function performs read modified write to PCI command status +* (offset 0x4) to set/reset bit 0 and 1. After those bits are set, +* the PCI slave is allowed to respond to PCI IO space access (bit 0) +* and PCI memory space access (bit 1). +* +* INPUT: +* pciIf - PCI interface number. +* dev - PCI device number. +* enable - Enable/disable parameter. +* +* OUTPUT: +* None. +* +* RETURN: +* MV_BAD_PARAM for bad parameters ,MV_ERROR on error ! otherwise MV_OK +* +*******************************************************************************/ +MV_STATUS mvPciSlaveEnable(MV_U32 pciIf, MV_U32 bus, MV_U32 dev, MV_BOOL enable) +{ + MV_U32 pciCommandStatus; + MV_U32 RegOffs; + + /* Parameter checking */ + if (pciIf >= mvCtrlPciMaxIfGet()) + { + mvOsPrintf("mvPciSlaveEnable: ERR. Invalid PCI interface %d\n", pciIf); + return MV_BAD_PARAM; + } + if (dev >= MAX_PCI_DEVICES) + { + mvOsPrintf("mvPciLocalDevNumSet: ERR. device number illigal %d\n", dev); + return MV_BAD_PARAM; + + } + + RegOffs = PCI_STATUS_AND_COMMAND; + + pciCommandStatus=mvPciConfigRead(pciIf, bus, dev, 0, RegOffs); + + if (MV_TRUE == enable) + { + pciCommandStatus |= (PSCR_IO_EN | PSCR_MEM_EN); + } + else + { + pciCommandStatus &= ~(PSCR_IO_EN | PSCR_MEM_EN); + } + + mvPciConfigWrite(pciIf, bus, dev, 0, RegOffs, pciCommandStatus); + + return MV_OK; +} + +/******************************************************************************* +* mvPciLocalBusNumSet - Set PCI interface local bus number. +* +* DESCRIPTION: +* This function sets given PCI interface its local bus number. +* Note: In case the PCI interface is PCI-X, the information is read-only. +* +* INPUT: +* pciIf - PCI interface number. +* busNum - Bus number. +* +* OUTPUT: +* None. +* +* RETURN: +* MV_NOT_ALLOWED in case PCI interface is PCI-X. +* MV_BAD_PARAM on bad parameters , +* otherwise MV_OK +* +*******************************************************************************/ +MV_STATUS mvPciLocalBusNumSet(MV_U32 pciIf, MV_U32 busNum) +{ + MV_U32 pciP2PConfig; + MV_PCI_MODE pciMode; + MV_U32 localBus; + MV_U32 localDev; + + + /* Parameter checking */ + if (pciIf >= mvCtrlPciMaxIfGet()) + { + mvOsPrintf("mvPciLocalBusNumSet: ERR. Invalid PCI interface %d\n",pciIf); + return MV_BAD_PARAM; + } + if (busNum >= MAX_PCI_BUSSES) + { + mvOsPrintf("mvPciLocalBusNumSet: ERR. bus number illigal %d\n", busNum); + return MV_ERROR; + + } + + localBus = mvPciLocalBusNumGet(pciIf); + localDev = mvPciLocalDevNumGet(pciIf); + + + /* PCI interface mode */ + mvPciModeGet(pciIf, &pciMode); + + /* if PCI type is PCI-X then it is not allowed to change the dev number */ + if (MV_PCIX == pciMode.pciType) + { + pciP2PConfig = mvPciConfigRead(pciIf, localBus, localDev, 0, PCIX_STATUS ); + + pciP2PConfig &= ~PXS_BN_MASK; + + pciP2PConfig |= (busNum << PXS_BN_OFFS) & PXS_BN_MASK; + + mvPciConfigWrite(pciIf, localBus, localDev, 0, PCIX_STATUS,pciP2PConfig ); + + } + else + { + pciP2PConfig = MV_REG_READ(PCI_P2P_CONFIG_REG(pciIf)); + + pciP2PConfig &= ~PPCR_BUS_NUM_MASK; + + pciP2PConfig |= (busNum << PPCR_BUS_NUM_OFFS) & PPCR_BUS_NUM_MASK; + + MV_REG_WRITE(PCI_P2P_CONFIG_REG(pciIf), pciP2PConfig); + + } + + + return MV_OK; +} + + +/******************************************************************************* +* mvPciLocalBusNumGet - Get PCI interface local bus number. +* +* DESCRIPTION: +* This function gets the local bus number of a given PCI interface. +* +* INPUT: +* pciIf - PCI interface number. +* +* OUTPUT: +* None. +* +* RETURN: +* Local bus number.0xffffffff on Error +* +*******************************************************************************/ +MV_U32 mvPciLocalBusNumGet(MV_U32 pciIf) +{ + MV_U32 pciP2PConfig; + + /* Parameter checking */ + if (PCI_DEFAULT_IF != pciIf) + { + if (pciIf >= mvCtrlPciMaxIfGet()) + { + mvOsPrintf("mvPciLocalBusNumGet: ERR. Invalid PCI interface %d\n", + pciIf); + return 0xFFFFFFFF; + } + } + + pciP2PConfig = MV_REG_READ(PCI_P2P_CONFIG_REG(pciIf)); + pciP2PConfig &= PPCR_BUS_NUM_MASK; + return (pciP2PConfig >> PPCR_BUS_NUM_OFFS); +} + + +/******************************************************************************* +* mvPciLocalDevNumSet - Set PCI interface local device number. +* +* DESCRIPTION: +* This function sets given PCI interface its local device number. +* Note: In case the PCI interface is PCI-X, the information is read-only. +* +* INPUT: +* pciIf - PCI interface number. +* devNum - Device number. +* +* OUTPUT: +* None. +* +* RETURN: +* MV_NOT_ALLOWED in case PCI interface is PCI-X. MV_BAD_PARAM on bad parameters , +* otherwise MV_OK +* +*******************************************************************************/ +MV_STATUS mvPciLocalDevNumSet(MV_U32 pciIf, MV_U32 devNum) +{ + MV_U32 pciP2PConfig; + MV_PCI_MODE pciMode; + MV_U32 localBus; + MV_U32 localDev; + + /* Parameter checking */ + if (pciIf >= mvCtrlPciMaxIfGet()) + { + mvOsPrintf("mvPciLocalDevNumSet: ERR. Invalid PCI interface %d\n",pciIf); + return MV_BAD_PARAM; + } + if (devNum >= MAX_PCI_DEVICES) + { + mvOsPrintf("mvPciLocalDevNumSet: ERR. device number illigal %d\n", + devNum); + return MV_BAD_PARAM; + + } + + localBus = mvPciLocalBusNumGet(pciIf); + localDev = mvPciLocalDevNumGet(pciIf); + + /* PCI interface mode */ + mvPciModeGet(pciIf, &pciMode); + + /* if PCI type is PCIX then it is not allowed to change the dev number */ + if (MV_PCIX == pciMode.pciType) + { + pciP2PConfig = mvPciConfigRead(pciIf, localBus, localDev, 0, PCIX_STATUS ); + + pciP2PConfig &= ~PXS_DN_MASK; + + pciP2PConfig |= (devNum << PXS_DN_OFFS) & PXS_DN_MASK; + + mvPciConfigWrite(pciIf,localBus, localDev, 0, PCIX_STATUS,pciP2PConfig ); + } + else + { + pciP2PConfig = MV_REG_READ(PCI_P2P_CONFIG_REG(pciIf)); + + pciP2PConfig &= ~PPCR_DEV_NUM_MASK; + + pciP2PConfig |= (devNum << PPCR_DEV_NUM_OFFS) & PPCR_DEV_NUM_MASK; + + MV_REG_WRITE(PCI_P2P_CONFIG_REG(pciIf), pciP2PConfig); + } + + return MV_OK; +} + +/******************************************************************************* +* mvPciLocalDevNumGet - Get PCI interface local device number. +* +* DESCRIPTION: +* This function gets the local device number of a given PCI interface. +* +* INPUT: +* pciIf - PCI interface number. +* +* OUTPUT: +* None. +* +* RETURN: +* Local device number. 0xffffffff on Error +* +*******************************************************************************/ +MV_U32 mvPciLocalDevNumGet(MV_U32 pciIf) +{ + MV_U32 pciP2PConfig; + + /* Parameter checking */ + + if (PCI_DEFAULT_IF != pciIf) + { + if (pciIf >= mvCtrlPciMaxIfGet()) + { + mvOsPrintf("mvPciLocalDevNumGet: ERR. Invalid PCI interface %d\n", + pciIf); + return 0xFFFFFFFF; + } + } + + pciP2PConfig = MV_REG_READ(PCI_P2P_CONFIG_REG(pciIf)); + + pciP2PConfig &= PPCR_DEV_NUM_MASK; + + return (pciP2PConfig >> PPCR_DEV_NUM_OFFS); +} + + + + diff --git a/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/mv_hal/pci/mvPci.h b/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/mv_hal/pci/mvPci.h new file mode 100644 index 0000000000..474633627e --- /dev/null +++ b/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/mv_hal/pci/mvPci.h @@ -0,0 +1,185 @@ +/******************************************************************************* +Copyright (C) Marvell International Ltd. and its affiliates + +This software file (the "File") is owned and distributed by Marvell +International Ltd. and/or its affiliates ("Marvell") under the following +alternative licensing terms. Once you have made an election to distribute the +File under one of the following license alternatives, please (i) delete this +introductory statement regarding license alternatives, (ii) delete the two +license alternatives that you have not elected to use and (iii) preserve the +Marvell copyright notice above. + +******************************************************************************** +Marvell Commercial License Option + +If you received this File from Marvell and you have entered into a commercial +license agreement (a "Commercial License") with Marvell, the File is licensed +to you under the terms of the applicable Commercial License. + +******************************************************************************** +Marvell GPL License Option + +If you received this File from Marvell, you may opt to use, redistribute and/or +modify this File in accordance with the terms and conditions of the General +Public License Version 2, June 1991 (the "GPL License"), a copy of which is +available along with the File in the license.txt file or by writing to the Free +Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or +on the worldwide web at http://www.gnu.org/licenses/gpl.txt. + +THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED +WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY +DISCLAIMED. The GPL License provides additional details about this warranty +disclaimer. +******************************************************************************** +Marvell BSD License Option + +If you received this File from Marvell, you may opt to use, redistribute and/or +modify this File under the following licensing terms. +Redistribution and use in source and binary forms, with or without modification, +are permitted provided that the following conditions are met: + + * Redistributions of source code must retain the above copyright notice, + this list of conditions and the following disclaimer. + + * Redistributions in binary form must reproduce the above copyright + notice, this list of conditions and the following disclaimer in the + documentation and/or other materials provided with the distribution. + + * Neither the name of Marvell nor the names of its contributors may be + used to endorse or promote products derived from this software without + specific prior written permission. + +THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND +ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED +WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE +DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR +ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES +(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; +LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON +ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS +SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + +*******************************************************************************/ + + +#ifndef __INCPCIH +#define __INCPCIH + +#include "mvCommon.h" +#include "mvOs.h" +#include "ctrlEnv/mvCtrlEnvSpec.h" +#include "pci/mvPciRegs.h" + + +/* NOTE not supported in this driver: + + Built In Self Test (BIST) + Vital Product Data (VPD) + Message Signaled Interrupt (MSI) + Power Management + Compact PCI Hot Swap + Header retarget + +Registers not supported: +1) PCI DLL Status and Control (PCI0 0x1D20, PCI1 0x1DA0) +2) PCI/MPP Pads Calibration (CI0/MPP[31:16] 0x1D1C, PCI1/MPP[15:0] 0X1D9C) +*/ + +/* defines */ +/* The number of supported PCI interfaces depend on Marvell controller */ +/* device number. This device number ID is located on the PCI unit */ +/* configuration header. This creates a loop where calling PCI */ +/* configuration read/write routine results a call to get PCI configuration */ +/* information etc. This macro defines a default PCI interface. This PCI */ +/* interface is sure to exist. */ +#define PCI_DEFAULT_IF 0 + + +/* typedefs */ +/* The Marvell controller supports both conventional PCI and PCI-X. */ +/* This enumeration describes the PCI type. */ +typedef enum _mvPciType +{ + MV_PCI_CONV, /* Conventional PCI */ + MV_PCIX /* PCI-X */ +}MV_PCI_TYPE; + +typedef enum _mvPciMod +{ + MV_PCI_MOD_HOST, + MV_PCI_MOD_DEVICE +}MV_PCI_MOD; + + +/* The Marvell controller supports both PCI width of 32 and 64 bit. */ +/* This enumerator describes PCI width */ +typedef enum _mvPciWidth +{ + MV_PCI_32, /* PCI width 32bit */ + MV_PCI_64 /* PCI width 64bit */ +}MV_PCI_WIDTH; + +/* This structure describes the PCI unit configured type, speed and width. */ +typedef struct _mvPciMode +{ + MV_PCI_TYPE pciType; /* PCI type */ + MV_U32 pciSpeed; /* Assuming PCI base clock on board is 33MHz */ + MV_PCI_WIDTH pciWidth; /* PCI bus width */ +}MV_PCI_MODE; + +/* mvPciInit - Initialize PCI interfaces*/ +MV_VOID mvPciHalInit(MV_U32 pciIf, MV_PCI_MOD pciIfmod); + +/* mvPciCommandSet - Set PCI comman register value.*/ +MV_STATUS mvPciCommandSet(MV_U32 pciIf, MV_U32 command); + +/* mvPciModeGet - Get PCI interface mode.*/ +MV_STATUS mvPciModeGet(MV_U32 pciIf, MV_PCI_MODE *pPciMode); + +/* mvPciRetrySet - Set PCI retry counters*/ +MV_STATUS mvPciRetrySet(MV_U32 pciIf, MV_U32 counter); + +/* mvPciDiscardTimerSet - Set PCI discard timer*/ +MV_STATUS mvPciDiscardTimerSet(MV_U32 pciIf, MV_U32 pClkCycles); + +/* mvPciArbEnable - PCI arbiter enable/disable*/ +MV_STATUS mvPciArbEnable(MV_U32 pciIf, MV_BOOL enable); + +/* mvPciArbParkDis - Disable arbiter parking on agent */ +MV_STATUS mvPciArbParkDis(MV_U32 pciIf, MV_U32 pciAgentMask); + +/* mvPciArbBrokDetectSet - Set PCI arbiter broken detection */ +MV_STATUS mvPciArbBrokDetectSet(MV_U32 pciIf, MV_U32 pClkCycles); + +/* mvPciConfigRead - Read from configuration space */ +MV_U32 mvPciConfigRead (MV_U32 pciIf, MV_U32 bus, MV_U32 dev, + MV_U32 func,MV_U32 regOff); + +/* mvPciConfigWrite - Write to configuration space */ +MV_STATUS mvPciConfigWrite(MV_U32 pciIf, MV_U32 bus, MV_U32 dev, + MV_U32 func, MV_U32 regOff, MV_U32 data); + +/* mvPciMasterEnable - Enable/disale PCI interface master transactions.*/ +MV_STATUS mvPciMasterEnable(MV_U32 pciIf, MV_BOOL enable); + +/* mvPciSlaveEnable - Enable/disale PCI interface slave transactions.*/ +MV_STATUS mvPciSlaveEnable(MV_U32 pciIf, MV_U32 bus, MV_U32 dev,MV_BOOL enable); + +/* mvPciLocalBusNumSet - Set PCI interface local bus number.*/ +MV_STATUS mvPciLocalBusNumSet(MV_U32 pciIf, MV_U32 busNum); + +/* mvPciLocalBusNumGet - Get PCI interface local bus number.*/ +MV_U32 mvPciLocalBusNumGet(MV_U32 pciIf); + +/* mvPciLocalDevNumSet - Set PCI interface local device number.*/ +MV_STATUS mvPciLocalDevNumSet(MV_U32 pciIf, MV_U32 devNum); + +/* mvPciLocalDevNumGet - Get PCI interface local device number.*/ +MV_U32 mvPciLocalDevNumGet(MV_U32 pciIf); + + +#endif /* #ifndef __INCPCIH */ + + + diff --git a/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/mv_hal/pci/mvPciRegs.h b/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/mv_hal/pci/mvPciRegs.h new file mode 100644 index 0000000000..89d0ef12d7 --- /dev/null +++ b/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/mv_hal/pci/mvPciRegs.h @@ -0,0 +1,411 @@ +/******************************************************************************* +Copyright (C) Marvell International Ltd. and its affiliates + +This software file (the "File") is owned and distributed by Marvell +International Ltd. and/or its affiliates ("Marvell") under the following +alternative licensing terms. Once you have made an election to distribute the +File under one of the following license alternatives, please (i) delete this +introductory statement regarding license alternatives, (ii) delete the two +license alternatives that you have not elected to use and (iii) preserve the +Marvell copyright notice above. + +******************************************************************************** +Marvell Commercial License Option + +If you received this File from Marvell and you have entered into a commercial +license agreement (a "Commercial License") with Marvell, the File is licensed +to you under the terms of the applicable Commercial License. + +******************************************************************************** +Marvell GPL License Option + +If you received this File from Marvell, you may opt to use, redistribute and/or +modify this File in accordance with the terms and conditions of the General +Public License Version 2, June 1991 (the "GPL License"), a copy of which is +available along with the File in the license.txt file or by writing to the Free +Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or +on the worldwide web at http://www.gnu.org/licenses/gpl.txt. + +THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED +WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY +DISCLAIMED. The GPL License provides additional details about this warranty +disclaimer. +******************************************************************************** +Marvell BSD License Option + +If you received this File from Marvell, you may opt to use, redistribute and/or +modify this File under the following licensing terms. +Redistribution and use in source and binary forms, with or without modification, +are permitted provided that the following conditions are met: + + * Redistributions of source code must retain the above copyright notice, + this list of conditions and the following disclaimer. + + * Redistributions in binary form must reproduce the above copyright + notice, this list of conditions and the following disclaimer in the + documentation and/or other materials provided with the distribution. + + * Neither the name of Marvell nor the names of its contributors may be + used to endorse or promote products derived from this software without + specific prior written permission. + +THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND +ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED +WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE +DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR +ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES +(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; +LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON +ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS +SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + +*******************************************************************************/ + +#ifndef __INCPCIREGSH +#define __INCPCIREGSH + + +#include "pci-if/mvPciIfRegs.h" +/* defines */ +#define MAX_PCI_DEVICES 32 +#define MAX_PCI_FUNCS 8 +#define MAX_PCI_BUSSES 128 + +/* enumerators */ + +/* This enumerator described the possible PCI slave targets. */ +/* PCI slave targets are designated memory/IO address spaces that the */ +/* PCI slave targets can access. They are also refered as "targets" */ +/* this enumeratoe order is determined by the content of : + PCI_BASE_ADDR_ENABLE_REG */ + + +/* registers offsetes defines */ + + + +/*************************/ +/* PCI control registers */ +/*************************/ +/* maen : should add new registers */ +#define PCI_CMD_REG(pciIf) (0x30c00 + ((pciIf) * 0x80)) +#define PCI_MODE_REG(pciIf) (0x30d00 + ((pciIf) * 0x80)) +#define PCI_RETRY_REG(pciIf) (0x30c04 + ((pciIf) * 0x80)) +#define PCI_DISCARD_TIMER_REG(pciIf) (0x30d04 + ((pciIf) * 0x80)) +#define PCI_ARBITER_CTRL_REG(pciIf) (0x31d00 + ((pciIf) * 0x80)) +#define PCI_P2P_CONFIG_REG(pciIf) (0x31d14 + ((pciIf) * 0x80)) +#define PCI_ACCESS_CTRL_BASEL_REG(pciIf, targetWin) \ + (0x31e00 + ((pciIf) * 0x80) + ((targetWin) * 0x10)) +#define PCI_ACCESS_CTRL_BASEH_REG(pciIf, targetWin) \ + (0x31e04 + ((pciIf) * 0x80) + ((targetWin) * 0x10)) +#define PCI_ACCESS_CTRL_SIZE_REG(pciIf, targetWin) \ + (0x31e08 + ((pciIf) * 0x80) + ((targetWin) * 0x10)) + +#define PCI_DLL_CTRL_REG(pciIf) (0x31d20 + ((pciIf) * 0x80)) + +/* PCI Dll Control (PDC)*/ +#define PDC_DLL_EN BIT0 + + +/* PCI Command Register (PCR) */ +#define PCR_MASTER_BYTE_SWAP_EN BIT0 +#define PCR_MASTER_WR_COMBINE_EN BIT4 +#define PCR_MASTER_RD_COMBINE_EN BIT5 +#define PCR_MASTER_WR_TRIG_WHOLE BIT6 +#define PCR_MASTER_RD_TRIG_WHOLE BIT7 +#define PCR_MASTER_MEM_RD_LINE_EN BIT8 +#define PCR_MASTER_MEM_RD_MULT_EN BIT9 +#define PCR_MASTER_WORD_SWAP_EN BIT10 +#define PCR_SLAVE_WORD_SWAP_EN BIT11 +#define PCR_NS_ACCORDING_RCV_TRANS BIT14 +#define PCR_MASTER_PCIX_REQ64N_EN BIT15 +#define PCR_SLAVE_BYTE_SWAP_EN BIT16 +#define PCR_MASTER_DAC_EN BIT17 +#define PCR_MASTER_M64_ALLIGN BIT18 +#define PCR_ERRORS_PROPAGATION_EN BIT19 +#define PCR_SLAVE_SWAP_ENABLE BIT20 +#define PCR_MASTER_SWAP_ENABLE BIT21 +#define PCR_MASTER_INT_SWAP_EN BIT22 +#define PCR_LOOP_BACK_ENABLE BIT23 +#define PCR_SLAVE_INTREG_SWAP_OFFS 24 +#define PCR_SLAVE_INTREG_SWAP_MASK 0x3 +#define PCR_SLAVE_INTREG_BYTE_SWAP \ + (MV_BYTE_SWAP << PCR_SLAVE_INT_REG_SWAP_MASK) +#define PCR_SLAVE_INTREG_NO_SWAP \ + (MV_NO_SWAP << PCR_SLAVE_INT_REG_SWAP_MASK) +#define PCR_SLAVE_INTREG_BYTE_WORD \ + (MV_BYTE_WORD_SWAP << PCR_SLAVE_INT_REG_SWAP_MASK) +#define PCR_SLAVE_INTREG_WORD_SWAP \ + (MV_WORD_SWAP << PCR_SLAVE_INT_REG_SWAP_MASK) +#define PCR_RESET_REASSERTION_EN BIT26 +#define PCR_PCI_TO_CPU_REG_ORDER_EN BIT28 +#define PCR_CPU_TO_PCI_ORDER_EN BIT29 +#define PCR_PCI_TO_CPU_ORDER_EN BIT30 + +/* PCI Mode Register (PMR) */ +#define PMR_PCI_ID_OFFS 0 /* PCI Interface ID */ +#define PMR_PCI_ID_MASK (0x1 << PMR_PCI_ID_OFFS) +#define PMR_PCI_ID_PCI(pciNum) ((pciNum) << PCI_MODE_PCIID_OFFS) + +#define PMR_PCI_64_OFFS 2 /* 64-bit PCI Interface */ +#define PMR_PCI_64_MASK (0x1 << PMR_PCI_64_OFFS) +#define PMR_PCI_64_64BIT (0x1 << PMR_PCI_64_OFFS) +#define PMR_PCI_64_32BIT (0x0 << PMR_PCI_64_OFFS) + +#define PMR_PCI_MODE_OFFS 4 /* PCI interface mode of operation */ +#define PMR_PCI_MODE_MASK (0x3 << PMR_PCI_MODE_OFFS) +#define PMR_PCI_MODE_CONV (0x0 << PMR_PCI_MODE_OFFS) +#define PMR_PCI_MODE_PCIX_66MHZ (0x1 << PMR_PCI_MODE_OFFS) +#define PMR_PCI_MODE_PCIX_100MHZ (0x2 << PMR_PCI_MODE_OFFS) +#define PMR_PCI_MODE_PCIX_133MHZ (0x3 << PMR_PCI_MODE_OFFS) + +#define PMR_EXP_ROM_SUPPORT BIT8 /* Expansion ROM Active */ + +#define PMR_PCI_RESET_OFFS 31 /* PCI Interface Reset Indication */ +#define PMR_PCI_RESET_MASK (0x1 << PMR_PCI_RESET_OFFS) +#define PMR_PCI_RESET_PCIXRST (0x0 << PMR_PCI_RESET_OFFS) + + +/* PCI Retry Register (PRR) */ +#define PRR_RETRY_CNTR_OFFS 16 /* Retry Counter */ +#define PRR_RETRY_CNTR_MAX 0xff +#define PRR_RETRY_CNTR_MASK (PRR_RETRY_CNTR_MAX << PRR_RETRY_CNTR_OFFS) + + +/* PCI Discard Timer Register (PDTR) */ +#define PDTR_TIMER_OFFS 0 /* Timer */ +#define PDTR_TIMER_MAX 0xffff +#define PDTR_TIMER_MIN 0x7F +#define PDTR_TIMER_MASK (PDTR_TIMER_MAX << PDTR_TIMER_OFFS) + + +/* PCI Arbiter Control Register (PACR) */ +#define PACR_BROKEN_DETECT_EN BIT1 /* Broken Detection Enable */ + +#define PACR_BROKEN_VAL_OFFS 3 /* Broken Value */ +#define PACR_BROKEN_VAL_MASK (0xf << PACR_BROKEN_VAL_OFFS) +#define PACR_BROKEN_VAL_CONV_MIN 0x2 +#define PACR_BROKEN_VAL_PCIX_MIN 0x6 + +#define PACR_PARK_DIS_OFFS 14 /* Parking Disable */ +#define PACR_PARK_DIS_MAX_AGENT 0x3f +#define PACR_PARK_DIS_MASK (PACR_PARK_DIS_MAX_AGENT<= mvCtrlPexMaxIfGet()) + { + mvOsPrintf("mvPexModeGet: ERR. Invalid PEX interface %d\n",pexIf); + return MV_ERROR; + } + } + + pexData = MV_REG_READ(PEX_CTRL_REG(pexIf)); + + switch (pexData & PXCR_DEV_TYPE_CTRL_MASK) + { + case PXCR_DEV_TYPE_CTRL_CMPLX: + pexMode->pexType = MV_PEX_ROOT_COMPLEX; + break; + case PXCR_DEV_TYPE_CTRL_POINT: + pexMode->pexType = MV_PEX_END_POINT; + break; + + } + + /* Check if we have link */ + if (MV_REG_READ(PEX_STATUS_REG(pexIf)) & PXSR_DL_DOWN) + { + pexMode->pexLinkUp = MV_FALSE; + + /* If there is no link, the auto negotiation data is worthless */ + pexMode->pexWidth = MV_PEX_WITDH_INVALID; + } + else + { + pexMode->pexLinkUp = MV_TRUE; + + /* We have link. The link width is now valid */ + pexData = MV_REG_READ(PEX_CFG_DIRECT_ACCESS(pexIf, PEX_LINK_CTRL_STAT_REG)); + pexMode->pexWidth = ((pexData & PXLCSR_NEG_LNK_WDTH_MASK) >> + PXLCSR_NEG_LNK_WDTH_OFFS); + } + + return MV_OK; +} + + +/* PEX configuration space read write */ + +/******************************************************************************* +* mvPexConfigRead - Read from configuration space +* +* DESCRIPTION: +* This function performs a 32 bit read from PEX configuration space. +* It supports both type 0 and type 1 of Configuration Transactions +* (local and over bridge). In order to read from local bus segment, use +* bus number retrieved from mvPexLocalBusNumGet(). Other bus numbers +* will result configuration transaction of type 1 (over bridge). +* +* INPUT: +* pexIf - PEX interface number. +* bus - PEX segment bus number. +* dev - PEX device number. +* func - Function number. +* regOffs - Register offset. +* +* OUTPUT: +* None. +* +* RETURN: +* 32bit register data, 0xffffffff on error +* +*******************************************************************************/ +MV_U32 mvPexConfigRead (MV_U32 pexIf, MV_U32 bus, MV_U32 dev, MV_U32 func, + MV_U32 regOff) +{ +#if defined(PCIE_VIRTUAL_BRIDGE_SUPPORT) + return mvPexVrtBrgConfigRead (pexIf, bus, dev, func, regOff); +} + +MV_U32 mvPexHwConfigRead (MV_U32 pexIf, MV_U32 bus, MV_U32 dev, MV_U32 func, + MV_U32 regOff) +{ +#endif + MV_U32 pexData = 0; + MV_U32 localDev,localBus; + + /* Parameter checking */ + if (PEX_DEFAULT_IF != pexIf) + { + if (pexIf >= mvCtrlPexMaxIfGet()) + { + mvOsPrintf("mvPexConfigRead: ERR. Invalid PEX interface %d\n",pexIf); + return 0xFFFFFFFF; + } + } + + if (dev >= MAX_PEX_DEVICES) + { + DB(mvOsPrintf("mvPexConfigRead: ERR. device number illigal %d\n", dev)); + return 0xFFFFFFFF; + } + + if (func >= MAX_PEX_FUNCS) + { + DB(mvOsPrintf("mvPexConfigRead: ERR. function num illigal %d\n", func)); + return 0xFFFFFFFF; + } + + if (bus >= MAX_PEX_BUSSES) + { + DB(mvOsPrintf("mvPexConfigRead: ERR. bus number illigal %d\n", bus)); + return MV_ERROR; + } + + DB(mvOsPrintf("mvPexConfigRead: pexIf %d, bus %d, dev %d, func %d, regOff 0x%x\n", + pexIf, bus, dev, func, regOff)); + + localDev = mvPexLocalDevNumGet(pexIf); + localBus = mvPexLocalBusNumGet(pexIf); + + /* Speed up the process. In case on no link, return MV_ERROR */ + if ((dev != localDev) || (bus != localBus)) + { + pexData = MV_REG_READ(PEX_STATUS_REG(pexIf)); + + if ((pexData & PXSR_DL_DOWN)) + { + return MV_ERROR; + } + } + + /* in PCI Express we have only one device number */ + /* and this number is the first number we encounter + else that the localDev*/ + /* spec pex define return on config read/write on any device */ + if (bus == localBus) + { + if (localDev == 0) + { + /* if local dev is 0 then the first number we encounter + after 0 is 1 */ + if ((dev != 1)&&(dev != localDev)) + { + return MV_ERROR; + } + } + else + { + /* if local dev is not 0 then the first number we encounter + is 0 */ + + if ((dev != 0)&&(dev != localDev)) + { + return MV_ERROR; + } + } + if(func != 0 ) /* i.e bridge */ + { + return MV_ERROR; + } + } + + + /* Creating PEX address to be passed */ + pexData = (bus << PXCAR_BUS_NUM_OFFS); + pexData |= (dev << PXCAR_DEVICE_NUM_OFFS); + pexData |= (func << PXCAR_FUNC_NUM_OFFS); + pexData |= (regOff & PXCAR_REG_NUM_MASK); /* lgacy register space */ + /* extended register space */ + pexData |=(((regOff & PXCAR_REAL_EXT_REG_NUM_MASK) >> + PXCAR_REAL_EXT_REG_NUM_OFFS) << PXCAR_EXT_REG_NUM_OFFS); + + pexData |= PXCAR_CONFIG_EN; + + /* Write the address to the PEX configuration address register */ + MV_REG_WRITE(PEX_CFG_ADDR_REG(pexIf), pexData); + + DB(mvOsPrintf("mvPexConfigRead:address pexData=%x ",pexData)); + + + /* In order to let the PEX controller absorbed the address of the read */ + /* transaction we perform a validity check that the address was written */ + if(pexData != MV_REG_READ(PEX_CFG_ADDR_REG(pexIf))) + { + return MV_ERROR; + } + + /* cleaning Master Abort */ + MV_REG_BIT_SET(PEX_CFG_DIRECT_ACCESS(pexIf,PEX_STATUS_AND_COMMAND), + PXSAC_MABORT); +#if 0 + /* Guideline (GL# PCI Express-1) Erroneous Read Data on Configuration */ + /* This guideline is relevant for all devices except of the following devices: + 88F5281-BO and above, 88F5181L-A0 and above, 88F1281 A0 and above + 88F6183 A0 and above, 88F6183L */ + if ( ( (dev != localDev) || (bus != localBus) ) && + ( + !(MV_5281_DEV_ID == mvCtrlModelGet())&& + !((MV_5181_DEV_ID == mvCtrlModelGet())&& (mvCtrlRevGet() >= MV_5181L_A0_REV))&& + !(MV_1281_DEV_ID == mvCtrlModelGet())&& + !(MV_6183_DEV_ID == mvCtrlModelGet())&& + !(MV_6183L_DEV_ID == mvCtrlModelGet())&& + !(MV_6281_DEV_ID == mvCtrlModelGet())&& + !(MV_6192_DEV_ID == mvCtrlModelGet())&& + !(MV_6190_DEV_ID == mvCtrlModelGet())&& + !(MV_6180_DEV_ID == mvCtrlModelGet())&& + !(MV_78XX0_DEV_ID == mvCtrlModelGet()) + )) + { + + /* PCI-Express configuration read work-around */ + + /* we will use one of the Punit (AHBToMbus) windows to access the xbar + and read the data from there */ + /* + Need to configure the 2 free Punit (AHB to MBus bridge) + address decoding windows: + Configure the flash Window to handle Configuration space requests + for PEX0/1: + 1. write 0x7931/0x7941 to the flash window and the size, + 79-xbar attr (pci cfg), 3/4-xbar target (pex0/1), 1-WinEn + 2. write base to flash window + + Configuration transactions from the CPU should write/read the data + to/from address of the form: + addr[31:28] = 0x5 (for PEX0) or 0x6 (for PEX1) + addr[27:24] = extended register number + addr[23:16] = bus number + addr[15:11] = device number + addr[10:8] = function number + addr[7:0] = register number + */ + + #include "ctrlEnv/sys/mvAhbToMbus.h" + { + MV_U32 winNum; + MV_AHB_TO_MBUS_DEC_WIN originWin; + MV_U32 pciAddr=0; + MV_U32 remapLow=0,remapHigh=0; + + /* + We will use DEV_CS2\Flash window for this workarround + */ + + winNum = mvAhbToMbusWinTargetGet(PEX_CONFIG_RW_WA_TARGET); + + /* save remap values if exist */ + if ((1 == winNum)||(0 == winNum)) + { + remapLow = MV_REG_READ(AHB_TO_MBUS_WIN_REMAP_LOW_REG(winNum)); + remapHigh = MV_REG_READ(AHB_TO_MBUS_WIN_REMAP_HIGH_REG(winNum)); + + } + + + /* save the original window values */ + mvAhbToMbusWinGet(winNum,&originWin); + + if (PEX_CONFIG_RW_WA_USE_ORIGINAL_WIN_VALUES) + { + /* set the window as xbar window */ + if (pexIf) + { + MV_REG_WRITE(AHB_TO_MBUS_WIN_CTRL_REG(winNum), + (0x7931 | (((originWin.addrWin.size >> 16)-1) ) << 16)); + } + else + { + MV_REG_WRITE(AHB_TO_MBUS_WIN_CTRL_REG(winNum), + (0x7941 | (((originWin.addrWin.size >> 16)-1) ) << 16)); + } + + MV_REG_WRITE(AHB_TO_MBUS_WIN_BASE_REG(winNum), + originWin.addrWin.baseLow); + + /*pciAddr = originWin.addrWin.baseLow;*/ + pciAddr = (MV_U32)CPU_MEMIO_UNCACHED_ADDR( + (MV_U32)originWin.addrWin.baseLow); + + } + else + { + /* set the window as xbar window */ + if (pexIf) + { + MV_REG_WRITE(AHB_TO_MBUS_WIN_CTRL_REG(winNum), + (0x7931 | (((PEX_CONFIG_RW_WA_SIZE >> 16)-1) ) << 16)); + } + else + { + MV_REG_WRITE(AHB_TO_MBUS_WIN_CTRL_REG(winNum), + (0x7941 | (((PEX_CONFIG_RW_WA_SIZE >> 16)-1) ) << 16)); + } + + MV_REG_WRITE(AHB_TO_MBUS_WIN_BASE_REG(winNum), + PEX_CONFIG_RW_WA_BASE); + + pciAddr = (MV_U32)CPU_MEMIO_UNCACHED_ADDR(PEX_CONFIG_RW_WA_BASE); + } + + + /* remap should be as base */ + if ((1 == winNum)||(0 == winNum)) + { + MV_REG_WRITE(AHB_TO_MBUS_WIN_REMAP_LOW_REG(winNum),pciAddr); + MV_REG_WRITE(AHB_TO_MBUS_WIN_REMAP_HIGH_REG(winNum),0); + + } + + /* extended register space */ + pciAddr |= (bus << 16); + pciAddr |= (dev << 11); + pciAddr |= (func << 8); + pciAddr |= (regOff & PXCAR_REG_NUM_MASK); /* lgacy register space */ + + pexData = *(MV_U32*)pciAddr; + pexData = MV_32BIT_LE(pexData); /* Data always in LE */ + + /* restore the original window values */ + mvAhbToMbusWinSet(winNum,&originWin); + + /* restore original remap values*/ + if ((1 == winNum)||(0 == winNum)) + { + MV_REG_WRITE(AHB_TO_MBUS_WIN_REMAP_LOW_REG(winNum),remapLow); + MV_REG_WRITE(AHB_TO_MBUS_WIN_REMAP_HIGH_REG(winNum),remapHigh); + + } + } + } + else +#endif + { + /* Read the Data returned in the PEX Data register */ + pexData = MV_REG_READ(PEX_CFG_DATA_REG(pexIf)); + + } + + DB(mvOsPrintf("mvPexConfigRead: got : %x \n",pexData)); + + return pexData; + +} + +/******************************************************************************* +* mvPexConfigWrite - Write to configuration space +* +* DESCRIPTION: +* This function performs a 32 bit write to PEX configuration space. +* It supports both type 0 and type 1 of Configuration Transactions +* (local and over bridge). In order to write to local bus segment, use +* bus number retrieved from mvPexLocalBusNumGet(). Other bus numbers +* will result configuration transaction of type 1 (over bridge). +* +* INPUT: +* pexIf - PEX interface number. +* bus - PEX segment bus number. +* dev - PEX device number. +* func - Function number. +* regOffs - Register offset. +* data - 32bit data. +* +* OUTPUT: +* None. +* +* RETURN: +* MV_BAD_PARAM for bad parameters ,MV_ERROR on error ! otherwise MV_OK +* +*******************************************************************************/ +MV_STATUS mvPexConfigWrite(MV_U32 pexIf, MV_U32 bus, MV_U32 dev, + MV_U32 func, MV_U32 regOff, MV_U32 data) +{ +#if defined(PCIE_VIRTUAL_BRIDGE_SUPPORT) + return mvPexVrtBrgConfigWrite (pexIf, bus, dev, func, regOff, data); +} + +MV_STATUS mvPexHwConfigWrite(MV_U32 pexIf, MV_U32 bus, MV_U32 dev, + MV_U32 func, MV_U32 regOff, MV_U32 data) +{ +#endif + MV_U32 pexData = 0; + MV_U32 localDev,localBus; + + /* Parameter checking */ + if (PEX_DEFAULT_IF != pexIf) + { + if (pexIf >= mvCtrlPexMaxIfGet()) + { + mvOsPrintf("mvPexConfigWrite: ERR. Invalid PEX interface %d\n", + pexIf); + return MV_ERROR; + } + } + + if (dev >= MAX_PEX_DEVICES) + { + mvOsPrintf("mvPexConfigWrite: ERR. device number illigal %d\n",dev); + return MV_BAD_PARAM; + } + + if (func >= MAX_PEX_FUNCS) + { + mvOsPrintf("mvPexConfigWrite: ERR. function number illigal %d\n", func); + return MV_ERROR; + } + + if (bus >= MAX_PEX_BUSSES) + { + mvOsPrintf("mvPexConfigWrite: ERR. bus number illigal %d\n", bus); + return MV_ERROR; + } + + + + localDev = mvPexLocalDevNumGet(pexIf); + localBus = mvPexLocalBusNumGet(pexIf); + + + /* in PCI Express we have only one device number other than ourselves*/ + /* and this number is the first number we encounter + else than the localDev that can be any valid dev number*/ + /* pex spec define return on config read/write on any device */ + if (bus == localBus) + { + + if (localDev == 0) + { + /* if local dev is 0 then the first number we encounter + after 0 is 1 */ + if ((dev != 1)&&(dev != localDev)) + { + return MV_ERROR; + } + + } + else + { + /* if local dev is not 0 then the first number we encounter + is 0 */ + + if ((dev != 0)&&(dev != localDev)) + { + return MV_ERROR; + } + } + + + } + + /* if we are not accessing ourselves , then check the link */ + if ((dev != localDev) || (bus != localBus) ) + { + /* workarround */ + /* when no link return MV_ERROR */ + + pexData = MV_REG_READ(PEX_STATUS_REG(pexIf)); + + if ((pexData & PXSR_DL_DOWN)) + { + return MV_ERROR; + } + + } + + pexData =0; + + /* Creating PEX address to be passed */ + pexData |= (bus << PXCAR_BUS_NUM_OFFS); + pexData |= (dev << PXCAR_DEVICE_NUM_OFFS); + pexData |= (func << PXCAR_FUNC_NUM_OFFS); + pexData |= (regOff & PXCAR_REG_NUM_MASK); /* lgacy register space */ + /* extended register space */ + pexData |=(((regOff & PXCAR_REAL_EXT_REG_NUM_MASK) >> + PXCAR_REAL_EXT_REG_NUM_OFFS) << PXCAR_EXT_REG_NUM_OFFS); + pexData |= PXCAR_CONFIG_EN; + + DB(mvOsPrintf("mvPexConfigWrite: If=%x bus=%x func=%x dev=%x regOff=%x data=%x \n", + pexIf,bus,func,dev,regOff,data,pexData) ); + + /* Write the address to the PEX configuration address register */ + MV_REG_WRITE(PEX_CFG_ADDR_REG(pexIf), pexData); + + /* Clear CPU pipe. Important where CPU can perform OOO execution */ + CPU_PIPE_FLUSH; + + /* In order to let the PEX controller absorbed the address of the read */ + /* transaction we perform a validity check that the address was written */ + if(pexData != MV_REG_READ(PEX_CFG_ADDR_REG(pexIf))) + { + return MV_ERROR; + } + + /* Write the Data passed to the PEX Data register */ + MV_REG_WRITE(PEX_CFG_DATA_REG(pexIf), data); + + return MV_OK; + +} + +/******************************************************************************* +* mvPexMasterEnable - Enable/disale PEX interface master transactions. +* +* DESCRIPTION: +* This function performs read modified write to PEX command status +* (offset 0x4) to set/reset bit 2. After this bit is set, the PEX +* master is allowed to gain ownership on the bus, otherwise it is +* incapable to do so. +* +* INPUT: +* pexIf - PEX interface number. +* enable - Enable/disable parameter. +* +* OUTPUT: +* None. +* +* RETURN: +* MV_BAD_PARAM for bad parameters ,MV_ERROR on error ! otherwise MV_OK +* +*******************************************************************************/ +MV_STATUS mvPexMasterEnable(MV_U32 pexIf, MV_BOOL enable) +{ + MV_U32 pexCommandStatus; + MV_U32 localBus; + MV_U32 localDev; + + /* Parameter checking */ + if (pexIf >= mvCtrlPexMaxIfGet()) + { + mvOsPrintf("mvPexMasterEnable: ERR. Invalid PEX interface %d\n", pexIf); + return MV_ERROR; + } + + localBus = mvPexLocalBusNumGet(pexIf); + localDev = mvPexLocalDevNumGet(pexIf); + + pexCommandStatus = MV_REG_READ(PEX_CFG_DIRECT_ACCESS(pexIf, + PEX_STATUS_AND_COMMAND)); + + + if (MV_TRUE == enable) + { + pexCommandStatus |= PXSAC_MASTER_EN; + } + else + { + pexCommandStatus &= ~PXSAC_MASTER_EN; + } + + + MV_REG_WRITE(PEX_CFG_DIRECT_ACCESS(pexIf,PEX_STATUS_AND_COMMAND), + pexCommandStatus); + + return MV_OK; +} + + +/******************************************************************************* +* mvPexSlaveEnable - Enable/disale PEX interface slave transactions. +* +* DESCRIPTION: +* This function performs read modified write to PEX command status +* (offset 0x4) to set/reset bit 0 and 1. After those bits are set, +* the PEX slave is allowed to respond to PEX IO space access (bit 0) +* and PEX memory space access (bit 1). +* +* INPUT: +* pexIf - PEX interface number. +* dev - PEX device number. +* enable - Enable/disable parameter. +* +* OUTPUT: +* None. +* +* RETURN: +* MV_BAD_PARAM for bad parameters ,MV_ERROR on error ! otherwise MV_OK +* +*******************************************************************************/ +MV_STATUS mvPexSlaveEnable(MV_U32 pexIf, MV_U32 bus,MV_U32 dev, MV_BOOL enable) +{ + MV_U32 pexCommandStatus; + MV_U32 RegOffs; + + /* Parameter checking */ + if (pexIf >= mvCtrlPexMaxIfGet()) + { + mvOsPrintf("mvPexSlaveEnable: ERR. Invalid PEX interface %d\n", pexIf); + return MV_BAD_PARAM; + } + if (dev >= MAX_PEX_DEVICES) + { + mvOsPrintf("mvPexLocalDevNumSet: ERR. device number illigal %d\n", dev); + return MV_BAD_PARAM; + + } + + + RegOffs = PEX_STATUS_AND_COMMAND; + + pexCommandStatus = mvPexConfigRead(pexIf, bus, dev, 0, RegOffs); + + if (MV_TRUE == enable) + { + pexCommandStatus |= (PXSAC_IO_EN | PXSAC_MEM_EN); + } + else + { + pexCommandStatus &= ~(PXSAC_IO_EN | PXSAC_MEM_EN); + } + + mvPexConfigWrite(pexIf, bus, dev, 0, RegOffs, pexCommandStatus); + + return MV_OK; + +} + +/******************************************************************************* +* mvPexLocalBusNumSet - Set PEX interface local bus number. +* +* DESCRIPTION: +* This function sets given PEX interface its local bus number. +* Note: In case the PEX interface is PEX-X, the information is read-only. +* +* INPUT: +* pexIf - PEX interface number. +* busNum - Bus number. +* +* OUTPUT: +* None. +* +* RETURN: +* MV_NOT_ALLOWED in case PEX interface is PEX-X. +* MV_BAD_PARAM on bad parameters , +* otherwise MV_OK +* +*******************************************************************************/ +MV_STATUS mvPexLocalBusNumSet(MV_U32 pexIf, MV_U32 busNum) +{ + MV_U32 pexStatus; + MV_U32 localBus; + MV_U32 localDev; + + + /* Parameter checking */ + if (pexIf >= mvCtrlPexMaxIfGet()) + { + mvOsPrintf("mvPexLocalBusNumSet: ERR. Invalid PEX interface %d\n",pexIf); + return MV_BAD_PARAM; + } + if (busNum >= MAX_PEX_BUSSES) + { + mvOsPrintf("mvPexLocalBusNumSet: ERR. bus number illigal %d\n", busNum); + return MV_ERROR; + + } + + localBus = mvPexLocalBusNumGet(pexIf); + localDev = mvPexLocalDevNumGet(pexIf); + + + + pexStatus = MV_REG_READ(PEX_STATUS_REG(pexIf)); + + pexStatus &= ~PXSR_PEX_BUS_NUM_MASK; + + pexStatus |= (busNum << PXSR_PEX_BUS_NUM_OFFS) & PXSR_PEX_BUS_NUM_MASK; + + MV_REG_WRITE(PEX_STATUS_REG(pexIf), pexStatus); + + + return MV_OK; +} + + +/******************************************************************************* +* mvPexLocalBusNumGet - Get PEX interface local bus number. +* +* DESCRIPTION: +* This function gets the local bus number of a given PEX interface. +* +* INPUT: +* pexIf - PEX interface number. +* +* OUTPUT: +* None. +* +* RETURN: +* Local bus number.0xffffffff on Error +* +*******************************************************************************/ +MV_U32 mvPexLocalBusNumGet(MV_U32 pexIf) +{ + MV_U32 pexStatus; + + /* Parameter checking */ + if (PEX_DEFAULT_IF != pexIf) + { + if (pexIf >= mvCtrlPexMaxIfGet()) + { + mvOsPrintf("mvPexLocalBusNumGet: ERR. Invalid PEX interface %d\n",pexIf); + return 0xFFFFFFFF; + } + } + + + pexStatus = MV_REG_READ(PEX_STATUS_REG(pexIf)); + + pexStatus &= PXSR_PEX_BUS_NUM_MASK; + + return (pexStatus >> PXSR_PEX_BUS_NUM_OFFS); + +} + + +/******************************************************************************* +* mvPexLocalDevNumSet - Set PEX interface local device number. +* +* DESCRIPTION: +* This function sets given PEX interface its local device number. +* Note: In case the PEX interface is PEX-X, the information is read-only. +* +* INPUT: +* pexIf - PEX interface number. +* devNum - Device number. +* +* OUTPUT: +* None. +* +* RETURN: +* MV_NOT_ALLOWED in case PEX interface is PEX-X. +* MV_BAD_PARAM on bad parameters , +* otherwise MV_OK +* +*******************************************************************************/ +MV_STATUS mvPexLocalDevNumSet(MV_U32 pexIf, MV_U32 devNum) +{ + MV_U32 pexStatus; + MV_U32 localBus; + MV_U32 localDev; + + /* Parameter checking */ + if (pexIf >= mvCtrlPexMaxIfGet()) + { + mvOsPrintf("mvPexLocalDevNumSet: ERR. Invalid PEX interface %d\n",pexIf); + return MV_BAD_PARAM; + } + if (devNum >= MAX_PEX_DEVICES) + { + mvOsPrintf("mvPexLocalDevNumSet: ERR. device number illigal %d\n", + devNum); + return MV_BAD_PARAM; + + } + + localBus = mvPexLocalBusNumGet(pexIf); + localDev = mvPexLocalDevNumGet(pexIf); + + + pexStatus = MV_REG_READ(PEX_STATUS_REG(pexIf)); + + pexStatus &= ~PXSR_PEX_DEV_NUM_MASK; + + pexStatus |= (devNum << PXSR_PEX_DEV_NUM_OFFS) & PXSR_PEX_DEV_NUM_MASK; + + MV_REG_WRITE(PEX_STATUS_REG(pexIf), pexStatus); + + + return MV_OK; +} + +/******************************************************************************* +* mvPexLocalDevNumGet - Get PEX interface local device number. +* +* DESCRIPTION: +* This function gets the local device number of a given PEX interface. +* +* INPUT: +* pexIf - PEX interface number. +* +* OUTPUT: +* None. +* +* RETURN: +* Local device number. 0xffffffff on Error +* +*******************************************************************************/ +MV_U32 mvPexLocalDevNumGet(MV_U32 pexIf) +{ + MV_U32 pexStatus; + + /* Parameter checking */ + + if (PEX_DEFAULT_IF != pexIf) + { + if (pexIf >= mvCtrlPexMaxIfGet()) + { + mvOsPrintf("mvPexLocalDevNumGet: ERR. Invalid PEX interface %d\n", + pexIf); + return 0xFFFFFFFF; + } + } + + pexStatus = MV_REG_READ(PEX_STATUS_REG(pexIf)); + + pexStatus &= PXSR_PEX_DEV_NUM_MASK; + + return (pexStatus >> PXSR_PEX_DEV_NUM_OFFS); +} + +MV_VOID mvPexPhyRegRead(MV_U32 pexIf, MV_U32 regOffset, MV_U16 *value) +{ + + MV_U32 regAddr; + if (pexIf >= mvCtrlPexMaxIfGet()) + { + mvOsPrintf("mvPexPhyRegRead: ERR. Invalid PEX interface %d\n", pexIf); + return; + } + regAddr = (BIT31 | ((regOffset & 0x3fff) << 16)); + MV_REG_WRITE(PEX_PHY_ACCESS_REG(pexIf), regAddr); + *value = MV_REG_READ(PEX_PHY_ACCESS_REG(pexIf)); +} + + +MV_VOID mvPexPhyRegWrite(MV_U32 pexIf, MV_U32 regOffset, MV_U16 value) +{ + + MV_U32 regAddr; + if(pexIf >= mvCtrlPexMaxIfGet()) + { + mvOsPrintf("mvPexPhyRegWrite: ERR. Invalid PEX interface %d\n", pexIf); + return; + } + regAddr = (((regOffset & 0x3fff) << 16) | value); + MV_REG_WRITE(PEX_PHY_ACCESS_REG(pexIf), regAddr); +} + +/******************************************************************************* +* mvPexActiveStateLinkPMEnable +* +* DESCRIPTION: +* Enable Active Link State Power Management +* +* INPUT: +* pexIf - PEX interface number. +* enable - MV_TRUE to enable ASPM, MV_FALSE to disable. +* +* OUTPUT: +* None +* +* RETURN: +* MV_OK on success , MV_ERROR otherwise +* +*******************************************************************************/ +MV_STATUS mvPexActiveStateLinkPMEnable(MV_U32 pexIf, MV_BOOL enable) +{ + MV_U32 reg; + + if(pexIf >= mvCtrlPexMaxIfGet()) + { + mvOsPrintf("mvPexActiveStateLinkPMEnable: ERR. Invalid PEX interface %d\n", pexIf); + return MV_ERROR; + } + + reg = MV_REG_READ(PEX_PWR_MNG_EXT_REG(pexIf)) & ~PXPMER_L1_ASPM_EN_MASK; + if(enable == MV_TRUE) + reg |= PXPMER_L1_ASPM_EN_MASK; + MV_REG_WRITE(PEX_PWR_MNG_EXT_REG(pexIf), reg); + + /* Enable / Disable L0/1 entry */ + reg = MV_REG_READ(PEX_CFG_DIRECT_ACCESS(pexIf, PEX_LINK_CTRL_STAT_REG)) + & ~PXLCSR_ASPM_CNT_MASK; + if(enable == MV_TRUE) + reg |= PXLCSR_ASPM_CNT_L0S_L1S_ENT_SUPP; + MV_REG_WRITE(PEX_CFG_DIRECT_ACCESS(pexIf, PEX_LINK_CTRL_STAT_REG), reg); + + return MV_OK; +} + + +/******************************************************************************* +* mvPexForceX1 +* +* DESCRIPTION: +* shut down lanes 1-3 if recognize that attached to an x1 end-point +* INPUT: +* pexIf - PEX interface number. +* +* OUTPUT: +* None +* +* RETURN: +* MV_OK on success , MV_ERROR otherwise +* +*******************************************************************************/ +MV_U32 mvPexForceX1(MV_U32 pexIf) +{ + MV_U32 regData = 0; + if(pexIf >= mvCtrlPexMaxIfGet()) + { + mvOsPrintf("mvPexForceX1: ERR. Invalid PEX interface %d\n", pexIf); + return MV_BAD_PARAM; + } + + regData = MV_REG_READ(PEX_CTRL_REG(pexIf)) & ~(PXCR_CONF_LINK_MASK) ; + regData |= PXCR_CONF_LINK_X1; + + MV_REG_WRITE(PEX_CTRL_REG(pexIf), regData); + return MV_OK; +} + +MV_BOOL mvPexIsPowerUp(MV_U32 pexIf) +{ + if(pexIf >= mvCtrlPexMaxIfGet()) + { + mvOsPrintf("mvPexIsPowerUp: ERR. Invalid PEX interface %d\n", pexIf); + return MV_FALSE; + } + return mvCtrlPwrClckGet(PEX_UNIT_ID, pexIf); +} + + +MV_VOID mvPexPowerDown(MV_U32 pexIf) +{ + if ( (mvCtrlModelGet() == MV_78XX0_DEV_ID) || + (mvCtrlModelGet() == MV_76100_DEV_ID) || + (mvCtrlModelGet() == MV_78100_DEV_ID) || + (mvCtrlModelGet() == MV_78200_DEV_ID) ) + { + mvCtrlPwrClckSet(PEX_UNIT_ID, pexIf, MV_FALSE); + } + else + { + MV_REG_WRITE((0x41B00 -(pexIf)*0x10000), 0x20800087); + } +} + + + diff --git a/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/mv_hal/pex/mvPex.h b/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/mv_hal/pex/mvPex.h new file mode 100644 index 0000000000..d8f1cdd9f9 --- /dev/null +++ b/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/mv_hal/pex/mvPex.h @@ -0,0 +1,168 @@ +/******************************************************************************* +Copyright (C) Marvell International Ltd. and its affiliates + +This software file (the "File") is owned and distributed by Marvell +International Ltd. and/or its affiliates ("Marvell") under the following +alternative licensing terms. Once you have made an election to distribute the +File under one of the following license alternatives, please (i) delete this +introductory statement regarding license alternatives, (ii) delete the two +license alternatives that you have not elected to use and (iii) preserve the +Marvell copyright notice above. + +******************************************************************************** +Marvell Commercial License Option + +If you received this File from Marvell and you have entered into a commercial +license agreement (a "Commercial License") with Marvell, the File is licensed +to you under the terms of the applicable Commercial License. + +******************************************************************************** +Marvell GPL License Option + +If you received this File from Marvell, you may opt to use, redistribute and/or +modify this File in accordance with the terms and conditions of the General +Public License Version 2, June 1991 (the "GPL License"), a copy of which is +available along with the File in the license.txt file or by writing to the Free +Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or +on the worldwide web at http://www.gnu.org/licenses/gpl.txt. + +THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED +WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY +DISCLAIMED. The GPL License provides additional details about this warranty +disclaimer. +******************************************************************************** +Marvell BSD License Option + +If you received this File from Marvell, you may opt to use, redistribute and/or +modify this File under the following licensing terms. +Redistribution and use in source and binary forms, with or without modification, +are permitted provided that the following conditions are met: + + * Redistributions of source code must retain the above copyright notice, + this list of conditions and the following disclaimer. + + * Redistributions in binary form must reproduce the above copyright + notice, this list of conditions and the following disclaimer in the + documentation and/or other materials provided with the distribution. + + * Neither the name of Marvell nor the names of its contributors may be + used to endorse or promote products derived from this software without + specific prior written permission. + +THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND +ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED +WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE +DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR +ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES +(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; +LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON +ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS +SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + +*******************************************************************************/ + +#ifndef __INCPEXH +#define __INCPEXH + +#include "mvCommon.h" +#include "mvOs.h" +#include "pex/mvPexRegs.h" +#include "ctrlEnv/mvCtrlEnvSpec.h" + + + +/* NOTE not supported in this driver:*/ + + +/* defines */ +/* The number of supported PEX interfaces depend on Marvell controller */ +/* device number. This device number ID is located on the PEX unit */ +/* configuration header. This creates a loop where calling PEX */ +/* configuration read/write routine results a call to get PEX configuration */ +/* information etc. This macro defines a default PEX interface. This PEX */ +/* interface is sure to exist. */ +#define PEX_DEFAULT_IF 0 + + +/* typedefs */ +/* The Marvell controller supports both root complex and end point devices */ +/* This enumeration describes the PEX type. */ +typedef enum _mvPexType +{ + MV_PEX_ROOT_COMPLEX, /* root complex device */ + MV_PEX_END_POINT /* end point device */ +}MV_PEX_TYPE; + +typedef enum _mvPexWidth +{ + MV_PEX_WITDH_X1 = 1, + MV_PEX_WITDH_X2, + MV_PEX_WITDH_X3, + MV_PEX_WITDH_X4, + MV_PEX_WITDH_INVALID +}MV_PEX_WIDTH; + +/* PEX Bar attributes */ +typedef struct _mvPexMode +{ + MV_PEX_TYPE pexType; + MV_PEX_WIDTH pexWidth; + MV_BOOL pexLinkUp; +}MV_PEX_MODE; + + + +/* Global Functions prototypes */ +/* mvPexInit - Initialize PEX interfaces*/ +MV_STATUS mvPexHalInit(MV_U32 pexIf, MV_PEX_TYPE pexType); + +/* mvPexModeGet - Get Pex If mode */ +MV_U32 mvPexModeGet(MV_U32 pexIf,MV_PEX_MODE *pexMode); + +/* mvPexConfigRead - Read from configuration space */ +MV_U32 mvPexConfigRead (MV_U32 pexIf, MV_U32 bus, MV_U32 dev, + MV_U32 func,MV_U32 regOff); + +/* mvPexConfigWrite - Write to configuration space */ +MV_STATUS mvPexConfigWrite(MV_U32 pexIf, MV_U32 bus, MV_U32 dev, + MV_U32 func, MV_U32 regOff, MV_U32 data); + +/* mvPexMasterEnable - Enable/disale PEX interface master transactions.*/ +MV_STATUS mvPexMasterEnable(MV_U32 pexIf, MV_BOOL enable); + +/* mvPexSlaveEnable - Enable/disale PEX interface slave transactions.*/ +MV_STATUS mvPexSlaveEnable(MV_U32 pexIf, MV_U32 bus,MV_U32 dev, MV_BOOL enable); + +/* mvPexLocalBusNumSet - Set PEX interface local bus number.*/ +MV_STATUS mvPexLocalBusNumSet(MV_U32 pexIf, MV_U32 busNum); + +/* mvPexLocalBusNumGet - Get PEX interface local bus number.*/ +MV_U32 mvPexLocalBusNumGet(MV_U32 pexIf); + +/* mvPexLocalDevNumSet - Set PEX interface local device number.*/ +MV_STATUS mvPexLocalDevNumSet(MV_U32 pexIf, MV_U32 devNum); + +/* mvPexLocalDevNumGet - Get PEX interface local device number.*/ +MV_U32 mvPexLocalDevNumGet(MV_U32 pexIf); +/* mvPexForceX1 - Force PEX interface to X1 mode. */ +MV_U32 mvPexForceX1(MV_U32 pexIf); + +/* mvPexIsPowerUp - Is PEX interface Power up? */ +MV_BOOL mvPexIsPowerUp(MV_U32 pexIf); + +/* mvPexPowerDown - Power Down */ +MV_VOID mvPexPowerDown(MV_U32 pexIf); + +/* mvPexPowerUp - Power Up */ +MV_VOID mvPexPowerUp(MV_U32 pexIf); + +/* mvPexPhyRegRead - Pex phy read */ +MV_VOID mvPexPhyRegRead(MV_U32 pexIf, MV_U32 regOffset, MV_U16 *value); + +/* mvPexPhyRegWrite - Pex phy write */ +MV_VOID mvPexPhyRegWrite(MV_U32 pexIf, MV_U32 regOffset, MV_U16 value); + +MV_STATUS mvPexActiveStateLinkPMEnable(MV_U32 pexIf, MV_BOOL enable); + +#endif /* #ifndef __INCPEXH */ diff --git a/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/mv_hal/pex/mvPexRegs.h b/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/mv_hal/pex/mvPexRegs.h new file mode 100644 index 0000000000..8ac1698364 --- /dev/null +++ b/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/mv_hal/pex/mvPexRegs.h @@ -0,0 +1,751 @@ +/******************************************************************************* +Copyright (C) Marvell International Ltd. and its affiliates + +This software file (the "File") is owned and distributed by Marvell +International Ltd. and/or its affiliates ("Marvell") under the following +alternative licensing terms. Once you have made an election to distribute the +File under one of the following license alternatives, please (i) delete this +introductory statement regarding license alternatives, (ii) delete the two +license alternatives that you have not elected to use and (iii) preserve the +Marvell copyright notice above. + +******************************************************************************** +Marvell Commercial License Option + +If you received this File from Marvell and you have entered into a commercial +license agreement (a "Commercial License") with Marvell, the File is licensed +to you under the terms of the applicable Commercial License. + +******************************************************************************** +Marvell GPL License Option + +If you received this File from Marvell, you may opt to use, redistribute and/or +modify this File in accordance with the terms and conditions of the General +Public License Version 2, June 1991 (the "GPL License"), a copy of which is +available along with the File in the license.txt file or by writing to the Free +Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or +on the worldwide web at http://www.gnu.org/licenses/gpl.txt. + +THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED +WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY +DISCLAIMED. The GPL License provides additional details about this warranty +disclaimer. +******************************************************************************** +Marvell BSD License Option + +If you received this File from Marvell, you may opt to use, redistribute and/or +modify this File under the following licensing terms. +Redistribution and use in source and binary forms, with or without modification, +are permitted provided that the following conditions are met: + + * Redistributions of source code must retain the above copyright notice, + this list of conditions and the following disclaimer. + + * Redistributions in binary form must reproduce the above copyright + notice, this list of conditions and the following disclaimer in the + documentation and/or other materials provided with the distribution. + + * Neither the name of Marvell nor the names of its contributors may be + used to endorse or promote products derived from this software without + specific prior written permission. + +THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND +ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED +WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE +DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR +ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES +(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; +LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON +ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS +SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + +*******************************************************************************/ + +#ifndef __INCPEXREGSH +#define __INCPEXREGSH + +#ifdef __cplusplus +extern "C" { +#endif /* __cplusplus */ + +/* defines */ +#define MAX_PEX_DEVICES 32 +#define MAX_PEX_FUNCS 8 +#define MAX_PEX_BUSSES 256 + + + +/*********************************************************/ +/* PCI Express Configuration Cycles Generation Registers */ +/*********************************************************/ + +#define PEX_CFG_ADDR_REG(pexIf) ((PEX_IF_BASE(pexIf)) + 0x18F8) +#define PEX_CFG_DATA_REG(pexIf) ((PEX_IF_BASE(pexIf)) + 0x18FC) +#define PEX_PHY_ACCESS_REG(pexIf) ((PEX_IF_BASE(pexIf)) + 0x1B00) +/* PCI Express Configuration Address Register */ +/* PEX_CFG_ADDR_REG (PXCAR)*/ + +#define PXCAR_REG_NUM_OFFS 2 +#define PXCAR_REG_NUM_MAX 0x3F +#define PXCAR_REG_NUM_MASK (PXCAR_REG_NUM_MAX << PXCAR_REG_NUM_OFFS) +#define PXCAR_FUNC_NUM_OFFS 8 +#define PXCAR_FUNC_NUM_MAX 0x7 +#define PXCAR_FUNC_NUM_MASK (PXCAR_FUNC_NUM_MAX << PXCAR_FUNC_NUM_OFFS) +#define PXCAR_DEVICE_NUM_OFFS 11 +#define PXCAR_DEVICE_NUM_MAX 0x1F +#define PXCAR_DEVICE_NUM_MASK (PXCAR_DEVICE_NUM_MAX << PXCAR_DEVICE_NUM_OFFS) +#define PXCAR_BUS_NUM_OFFS 16 +#define PXCAR_BUS_NUM_MAX 0xFF +#define PXCAR_BUS_NUM_MASK (PXCAR_BUS_NUM_MAX << PXCAR_BUS_NUM_OFFS) +#define PXCAR_EXT_REG_NUM_OFFS 24 +#define PXCAR_EXT_REG_NUM_MAX 0xF + +/* in pci express register address is now the legacy register address (8 bits) +with the new extended register address (more 4 bits) , below is the mask of +the upper 4 bits of the full register address */ + +#define PXCAR_REAL_EXT_REG_NUM_OFFS 8 +#define PXCAR_EXT_REG_NUM_MASK (PXCAR_EXT_REG_NUM_MAX << PXCAR_EXT_REG_NUM_OFFS) +#define PXCAR_CONFIG_EN BIT31 + +#define PXCAR_REAL_EXT_REG_NUM_OFFS 8 +#define PXCAR_REAL_EXT_REG_NUM_MASK (0xF << PXCAR_REAL_EXT_REG_NUM_OFFS) + +/* The traditional PCI spec defined 6-bit field to describe register offset.*/ +/* The new PCI Express extend the register offset by an extra 4-bits. */ +/* The below macro assign 10-bit register offset into the apprpreate */ +/* fields in the CFG_ADDR_REG */ +#define PXCAR_REG_OFFS_SET(regOffs) \ + ( (regOff & PXCAR_REG_NUM_MASK) | \ + ( ((regOff & PXCAR_REAL_EXT_REG_NUM_MASK) >> PXCAR_REAL_EXT_REG_NUM_OFFS) << PXCAR_EXT_REG_NUM_OFFS) ) + +/***********************************/ +/* PCI Express Interrupt registers */ +/***********************************/ +#define PEX_CAUSE_REG(pexIf) ((PEX_IF_BASE(pexIf)) + 0x1900) +#define PEX_MASK_REG(pexIf) ((PEX_IF_BASE(pexIf)) + 0x1910) + +#define PXICR_TX_REQ_IN_DLDOWN_ERR BIT0 /* Transmit request while field */ + /* of the PCI Express */ +/* PCI Express Interrupt Cause */ +/* PEX_INT_CAUSE_REG (PXICR)*/ +/* PEX_INT_MASK_REG*/ +/* +NOTE:All bits except bits[27:24] are Read/Write Clear only. A cause bit sets +upon an error event occurrence. A write of 0 clears the bit. A write of 1 has +no affect. Bits[24:27} are set and cleared upon reception of interrupt +emulation messages. + +Mask bit per cause bit. If a bit is set to 1, the corresponding event is +enabled. Mask does not affect setting of the Interrupt Cause register bits; +it only affects the assertion of the interrupt .*/ + + +#define PXICR_MDIS_CAUSE BIT1 /* Attempt to generate PCI transaction + while master is disabled */ +#define PXICR_ERR_WRTO_REG_CAUSE BIT3 /* Erroneous write attempt to + PCI Express internal register*/ +#define PXICR_HIT_DFLT_WIN_ERR BIT4 /* Hit Default Window Error */ +#define PXICR_RX_RAM_PAR_ERR BIT6 /* Rx RAM Parity Error */ +#define PXICR_TX_RAM_PAR_ERR BIT7 /* Tx RAM Parity Error */ +#define PXICR_COR_ERR_DET BIT8 /* Correctable Error Detected*/ +#define PXICR_NF_ERR_DET BIT9 /* Non-Fatal Error Detected*/ +#define PXICR_FERR_DET BIT10 /* Fatal Error Detected*/ +#define PXICR_DSTATE_CHANGE BIT11 /* Dstate Change Indication*/ +#define PXICR_BIST BIT12 /* PCI-Express BIST activated*/ +#define PXICR_FLW_CTRL_PROT BIT14 /* Flow Control Protocol Error */ + +#define PXICR_RCV_UR_CA_ERR BIT15 /* Received UR or CA status. */ +#define PXICR_RCV_ERR_FATAL BIT16 /* Received ERR_FATAL message.*/ +#define PXICR_RCV_ERR_NON_FATAL BIT17 /* Received ERR_NONFATAL message*/ +#define PXICR_RCV_ERR_COR BIT18 /* Received ERR_COR message.*/ +#define PXICR_RCV_CRS BIT19 /* Received CRS completion status*/ +#define PXICR_SLV_HOT_RESET BIT20 /* Received Hot Reset Indication*/ +#define PXICR_SLV_DIS_LINK BIT21 /* Slave Disable Link Indication*/ +#define PXICR_SLV_LB BIT22 /* Slave Loopback Indication*/ +#define PXICR_LINK_FAIL BIT23 /* Link Failure indication.*/ +#define PXICR_RCV_INTA BIT24 /* IntA status.*/ +#define PXICR_RCV_INTB BIT25 /* IntB status.*/ +#define PXICR_RCV_INTC BIT26 /* IntC status.*/ +#define PXICR_RCV_INTD BIT27 /* IntD status.*/ +#define PXICR_RCV_PM_PME BIT28 /* Received PM_PME message. */ + + +/********************************************/ +/* PCI Express Control and Status Registers */ +/********************************************/ +#define PEX_CTRL_REG(pexIf) ((PEX_IF_BASE(pexIf)) + 0x1A00) +#define PEX_STATUS_REG(pexIf) ((PEX_IF_BASE(pexIf)) + 0x1A04) +#define PEX_COMPLT_TMEOUT_REG(pexIf) ((PEX_IF_BASE(pexIf)) + 0x1A10) +#define PEX_PWR_MNG_EXT_REG(pexIf) ((PEX_IF_BASE(pexIf)) + 0x1A18) +#define PEX_FLOW_CTRL_REG(pexIf) ((PEX_IF_BASE(pexIf)) + 0x1A20) +#define PEX_ACK_TMR_4X_REG(pexIf) ((PEX_IF_BASE(pexIf)) + 0x1A30) +#define PEX_ACK_TMR_1X_REG(pexIf) ((PEX_IF_BASE(pexIf)) + 0x1A40) +#define PEX_TL_CTRL_REG(pexIf) ((PEX_IF_BASE(pexIf)) + 0x1AB0) + + +#define PEX_RAM_PARITY_CTRL_REG(pexIf) ((PEX_IF_BASE(pexIf)) + 0x1A50) +/* PCI Express Control Register */ +/* PEX_CTRL_REG (PXCR) */ + +#define PXCR_CONF_LINK_OFFS 0 +#define PXCR_CONF_LINK_MASK (1 << PXCR_CONF_LINK_OFFS) +#define PXCR_CONF_LINK_X4 (0 << PXCR_CONF_LINK_OFFS) +#define PXCR_CONF_LINK_X1 (1 << PXCR_CONF_LINK_OFFS) +#define PXCR_DEV_TYPE_CTRL_OFFS 1 /*PCI ExpressDevice Type Control*/ +#define PXCR_DEV_TYPE_CTRL_MASK BIT1 +#define PXCR_DEV_TYPE_CTRL_CMPLX (1 << PXCR_DEV_TYPE_CTRL_OFFS) +#define PXCR_DEV_TYPE_CTRL_POINT (0 << PXCR_DEV_TYPE_CTRL_OFFS) +#define PXCR_CFG_MAP_TO_MEM_EN BIT2 /* Configuration Header Mapping + to Memory Space Enable */ + +#define PXCR_CFG_MAP_TO_MEM_EN BIT2 /* Configuration Header Mapping + to Memory Space Enable*/ + +#define PXCR_RSRV1_OFFS 5 +#define PXCR_RSRV1_MASK (0x7 << PXCR_RSRV1_OFFS) +#define PXCR_RSRV1_VAL (0x0 << PXCR_RSRV1_OFFS) + +#define PXCR_CONF_MAX_OUTSTND_OFFS 8 /*Maximum outstanding NP requests as a master*/ +#define PXCR_CONF_MAX_OUTSTND_MASK (0x3 << PXCR_CONF_MAX_OUTSTND_OFFS) + + +#define PXCR_CONF_NFTS_OFFS 16 /*number of FTS Ordered-Sets*/ +#define PXCR_CONF_NFTS_MASK (0xff << PXCR_CONF_NFTS_OFFS) + +#define PXCR_CONF_MSTR_HOT_RESET BIT24 /*Master Hot-Reset.*/ +#define PXCR_CONF_MSTR_LB BIT26 /* Master Loopback */ +#define PXCR_CONF_MSTR_DIS_SCRMB BIT27 /* Master Disable Scrambling*/ +#define PXCR_CONF_DIRECT_DIS_SCRMB BIT28 /* Direct Disable Scrambling*/ + +/* PCI Express Status Register */ +/* PEX_STATUS_REG (PXSR) */ + +#define PXSR_DL_DOWN BIT0 /* DL_Down indication.*/ + +#define PXSR_PEX_BUS_NUM_OFFS 8 /* Bus Number Indication */ +#define PXSR_PEX_BUS_NUM_MASK (0xff << PXSR_PEX_BUS_NUM_OFFS) + +#define PXSR_PEX_DEV_NUM_OFFS 16 /* Device Number Indication */ +#define PXSR_PEX_DEV_NUM_MASK (0x1f << PXSR_PEX_DEV_NUM_OFFS) + +#define PXSR_PEX_SLV_HOT_RESET BIT24 /* Slave Hot Reset Indication*/ +#define PXSR_PEX_SLV_DIS_LINK BIT25 /* Slave Disable Link Indication*/ +#define PXSR_PEX_SLV_LB BIT26 /* Slave Loopback Indication*/ +#define PXSR_PEX_SLV_DIS_SCRMB BIT27 /* Slave Disable Scrambling Indication*/ + + +/* PCI Express Completion Timeout Register */ +/* PEX_COMPLT_TMEOUT_REG (PXCTR)*/ + +#define PXCTR_CMP_TO_THRSHLD_OFFS 0 /* Completion Timeout Threshold */ +#define PXCTR_CMP_TO_THRSHLD_MASK (0xffff << PXCTR_CMP_TO_THRSHLD_OFFS) + +/* PCI Express Power Management Extended Register */ +/* PEX_PWR_MNG_EXT_REG (PXPMER) */ + +#define PXPMER_L1_ASPM_EN_OFFS 1 +#define PXPMER_L1_ASPM_EN_MASK (0x1 << PXPMER_L1_ASPM_EN_OFFS) + +/* PCI Express Flow Control Register */ +/* PEX_FLOW_CTRL_REG (PXFCR)*/ + +#define PXFCR_PH_INIT_FC_OFFS 0 /*Posted Headers Flow Control Credit + Initial Value.*/ +#define PXFCR_PH_INIT_FC_MASK (0xff << PXFCR_PH_INIT_FC_OFFS) + + +#define PXFCR_NPH_INIT_FC_OFFS 8 /* Classified Non-Posted Headers + Flow Control Credit Initial Value*/ +#define PXFCR_NPH_INIT_FC_MASK (0xff << PXFCR_NPH_INIT_FC_OFFS) + +#define PXFCR_CH_INIT_FC_OFFS 16 /* Completion Headers Flow Control + Credit Initial Value Infinite*/ + +#define PXFCR_CH_INIT_FC_MASK (0xff << PXFCR_CH_INIT_FC_OFFS) + +#define PXFCR_FC_UPDATE_TO_OFFS 24 /* Flow Control Update Timeout */ +#define PXFCR_FC_UPDATE_TO_MASK (0xff << PXFCR_FC_UPDATE_TO_OFFS) + +/* PCI Express Acknowledge Timers (4X) Register */ +/* PEX_ACK_TMR_4X_REG (PXAT4R) */ +#define PXAT1R_ACK_LAT_TOX4_OFFS 0 /* Ack Latency Timer Timeout Value */ +#define PXAT1R_ACK_LAT_TOX4_MASK (0xffff << PXAT4R_ACK_LAT_TOX1_OFFS) +#define PXAT1R_ACK_RPLY_TOX4_OFFS 16 /* Ack Replay Timer Timeout Value */ +#define PXAT1R_ACK_RPLY_TOX4_MASK (0xffff << PXAT1R_ACK_RPLY_TOX1_OFFS) + +/* PCI Express Acknowledge Timers (1X) Register */ +/* PEX_ACK_TMR_1X_REG (PXAT1R) */ + +#define PXAT1R_ACK_LAT_TOX1_OFFS 0 /* Acknowledge Latency Timer Timeout + Value for 1X Link*/ +#define PXAT1R_ACK_LAT_TOX1_MASK (0xffff << PXAT1R_ACK_LAT_TOX1_OFFS) + +#define PXAT1R_ACK_RPLY_TOX1_OFFS 16 /* Acknowledge Replay Timer Timeout + Value for 1X*/ +#define PXAT1R_ACK_RPLY_TOX1_MASK (0xffff << PXAT1R_ACK_RPLY_TOX1_OFFS) + + +/* PCI Express TL Control Register */ +/* PEX_TL_CTRL_REG (PXTCR) */ + +#define PXTCR_TX_CMP_BUFF_NO_OFFS 8 /*Number of completion buffers in Tx*/ +#define PXTCR_TX_CMP_BUFF_NO_MASK (0xf << PXTCR_TX_CMP_BUFF_NO_OFFS) + +/* PCI Express Debug MAC Control Register */ +/* PEX_DEBUG_MAC_CTRL_REG (PXDMCR) */ + +#define PXDMCR_LINKUP BIT4 + + + +/**********************************************/ +/* PCI Express Configuration Header Registers */ +/**********************************************/ +#define PEX_CFG_DIRECT_ACCESS(pexIf,cfgReg) ((PEX_IF_BASE(pexIf)) + (cfgReg)) + +#define PEX_DEVICE_AND_VENDOR_ID 0x000 +#define PEX_STATUS_AND_COMMAND 0x004 +#define PEX_CLASS_CODE_AND_REVISION_ID 0x008 +#define PEX_BIST_HDR_TYPE_LAT_TMR_CACHE_LINE 0x00C +#define PEX_MEMORY_BAR_BASE_ADDR(barNum) (0x010 + ((barNum) << 2)) +#define PEX_MV_BAR_BASE(barNum) (0x010 + (barNum) * 8) +#define PEX_MV_BAR_BASE_HIGH(barNum) (0x014 + (barNum) * 8) +#define PEX_BAR0_INTER_REG 0x010 +#define PEX_BAR0_INTER_REG_HIGH 0x014 +#define PEX_BAR1_REG 0x018 +#define PEX_BAR1_REG_HIGH 0x01C +#define PEX_BAR2_REG 0x020 +#define PEX_BAR2_REG_HIGH 0x024 + +#define PEX_SUBSYS_ID_AND_SUBSYS_VENDOR_ID 0x02C +#define PEX_EXPANSION_ROM_BASE_ADDR_REG 0x030 +#define PEX_CAPABILTY_LIST_POINTER 0x034 +#define PEX_INTERRUPT_PIN_AND_LINE 0x03C + +/* capability list */ +#define PEX_POWER_MNG_CAPABILITY 0x040 +#define PEX_POWER_MNG_STATUS_CONTROL 0x044 + +#define PEX_MSI_MESSAGE_CONTROL 0x050 +#define PEX_MSI_MESSAGE_ADDR 0x054 +#define PEX_MSI_MESSAGE_HIGH_ADDR 0x058 +#define PEX_MSI_MESSAGE_DATA 0x05C + +#define PEX_CAPABILITY_REG 0x60 +#define PEX_DEV_CAPABILITY_REG 0x64 +#define PEX_DEV_CTRL_STAT_REG 0x68 +#define PEX_LINK_CAPABILITY_REG 0x6C +#define PEX_LINK_CTRL_STAT_REG 0x70 + +#define PEX_ADV_ERR_RPRT_HDR_TRGT_REG 0x100 +#define PEX_UNCORRECT_ERR_STAT_REG 0x104 +#define PEX_UNCORRECT_ERR_MASK_REG 0x108 +#define PEX_UNCORRECT_ERR_SERVITY_REG 0x10C +#define PEX_CORRECT_ERR_STAT_REG 0x110 +#define PEX_CORRECT_ERR_MASK_REG 0x114 +#define PEX_ADV_ERR_CAPABILITY_CTRL_REG 0x118 +#define PEX_HDR_LOG_FIRST_DWORD_REG 0x11C +#define PEX_HDR_LOG_SECOND_DWORD_REG 0x120 +#define PEX_HDR_LOG_THIRD_DWORD_REG 0x124 +#define PEX_HDR_LOG_FOURTH_DWORD_REG 0x128 + + + +/* PCI Express Device and Vendor ID Register*/ +/*PEX_DEVICE_AND_VENDOR_ID (PXDAVI)*/ + +#define PXDAVI_VEN_ID_OFFS 0 /* Vendor ID */ +#define PXDAVI_VEN_ID_MASK (0xffff << PXDAVI_VEN_ID_OFFS) + +#define PXDAVI_DEV_ID_OFFS 16 /* Device ID */ +#define PXDAVI_DEV_ID_MASK (0xffff << PXDAVI_DEV_ID_OFFS) + + +/* PCI Express Command and Status Register*/ +/*PEX_STATUS_AND_COMMAND (PXSAC)*/ + +#define PXSAC_IO_EN BIT0 /* IO Enable */ +#define PXSAC_MEM_EN BIT1 /* Memory Enable */ +#define PXSAC_MASTER_EN BIT2 /* Master Enable */ +#define PXSAC_PERR_EN BIT6 /* Parity Errors Respond Enable */ +#define PXSAC_SERR_EN BIT8 /* Ability to assert SERR# line */ +#define PXSAC_INT_DIS BIT10 /* Interrupt Disable */ +#define PXSAC_INT_STAT BIT19 /* Interrupt Status */ +#define PXSAC_CAP_LIST BIT20 /* Capability List Support */ +#define PXSAC_MAS_DATA_PERR BIT24 /* Master Data Parity Error */ +#define PXSAC_SLAVE_TABORT BIT27 /* Signalled Target Abort */ +#define PXSAC_RT_ABORT BIT28 /* Recieved Target Abort */ +#define PXSAC_MABORT BIT29 /* Recieved Master Abort */ +#define PXSAC_SYSERR BIT30 /* Signalled system error */ +#define PXSAC_DET_PARERR BIT31 /* Detect Parity Error */ + + +/* PCI Express Class Code and Revision ID Register*/ +/*PEX_CLASS_CODE_AND_REVISION_ID (PXCCARI)*/ + +#define PXCCARI_REVID_OFFS 0 /* Revision ID */ +#define PXCCARI_REVID_MASK (0xff << PXCCARI_REVID_OFFS) + +#define PXCCARI_FULL_CLASS_OFFS 8 /* Full Class Code */ +#define PXCCARI_FULL_CLASS_MASK (0xffffff << PXCCARI_FULL_CLASS_OFFS) + +#define PXCCARI_PROGIF_OFFS 8 /* Prog .I/F*/ +#define PXCCARI_PROGIF_MASK (0xff << PXCCARI_PROGIF_OFFS) + +#define PXCCARI_SUB_CLASS_OFFS 16 /* Sub Class*/ +#define PXCCARI_SUB_CLASS_MASK (0xff << PXCCARI_SUB_CLASS_OFFS) + +#define PXCCARI_BASE_CLASS_OFFS 24 /* Base Class*/ +#define PXCCARI_BASE_CLASS_MASK (0xff << PXCCARI_BASE_CLASS_OFFS) + + +/* PCI Express BIST, Header Type and Cache Line Size Register*/ +/*PEX_BIST_HDR_TYPE_LAT_TMR_CACHE_LINE (PXBHTLTCL)*/ + +#define PXBHTLTCL_CACHELINE_OFFS 0 /* Specifies the cache line size */ +#define PXBHTLTCL_CACHELINE_MASK (0xff << PXBHTLTCL_CACHELINE_OFFS) + +#define PXBHTLTCL_HEADTYPE_FULL_OFFS 16 /* Full Header Type */ +#define PXBHTLTCL_HEADTYPE_FULL_MASK (0xff << PXBHTLTCL_HEADTYPE_FULL_OFFS) + +#define PXBHTLTCL_MULTI_FUNC BIT23 /* Multi/Single function */ + +#define PXBHTLTCL_HEADER_OFFS 16 /* Header type */ +#define PXBHTLTCL_HEADER_MASK (0x7f << PXBHTLTCL_HEADER_OFFS) +#define PXBHTLTCL_HEADER_STANDARD (0x0 << PXBHTLTCL_HEADER_OFFS) +#define PXBHTLTCL_HEADER_PCI2PCI_BRIDGE (0x1 << PXBHTLTCL_HEADER_OFFS) + + +#define PXBHTLTCL_BISTCOMP_OFFS 24 /* BIST Completion Code */ +#define PXBHTLTCL_BISTCOMP_MASK (0xf << PXBHTLTCL_BISTCOMP_OFFS) + +#define PXBHTLTCL_BISTACT BIT30 /* BIST Activate bit */ +#define PXBHTLTCL_BISTCAP BIT31 /* BIST Capable Bit */ +#define PXBHTLTCL_BISTCAP_OFFS 31 +#define PXBHTLTCL_BISTCAP_MASK BIT31 +#define PXBHTLTCL_BISTCAP_VAL 0 + + +/* PCI Express Subsystem Device and Vendor ID */ +/*PEX_SUBSYS_ID_AND_SUBSYS_VENDOR_ID (PXSIASVI)*/ + +#define PXSIASVI_VENID_OFFS 0 /* Subsystem Manufacturer Vendor ID Number */ +#define PXSIASVI_VENID_MASK (0xffff << PXSIASVI_VENID_OFFS) + +#define PXSIASVI_DEVID_OFFS 16 /* Subsystem Device ID Number */ +#define PXSIASVI_DEVID_MASK (0xffff << PXSIASVI_DEVID_OFFS) + + +/* PCI Express Capability List Pointer Register*/ +/*PEX_CAPABILTY_LIST_POINTER (PXCLP)*/ + +#define PXCLP_CAPPTR_OFFS 0 /* Capability List Pointer */ +#define PXCLP_CAPPTR_MASK (0xff << PXCLP_CAPPTR_OFFS) + +/* PCI Express Interrupt Pin and Line Register */ +/*PEX_INTERRUPT_PIN_AND_LINE (PXIPAL)*/ + +#define PXIPAL_INTLINE_OFFS 0 /* Interrupt line (IRQ) */ +#define PXIPAL_INTLINE_MASK (0xff << PXIPAL_INTLINE_OFFS) + +#define PXIPAL_INTPIN_OFFS 8 /* interrupt pin (A,B,C,D) */ +#define PXIPAL_INTPIN_MASK (0xff << PXIPAL_INTPIN_OFFS) + + +/* PCI Express Power Management Capability Header Register*/ +/*PEX_POWER_MNG_CAPABILITY (PXPMC)*/ + +#define PXPMC_CAP_ID_OFFS 0 /* Capability ID */ +#define PXPMC_CAP_ID_MASK (0xff << PXPMC_CAP_ID_OFFS) + +#define PXPMC_NEXT_PTR_OFFS 8 /* Next Item Pointer */ +#define PXPMC_NEXT_PTR_MASK (0xff << PXPMC_NEXT_PTR_OFFS) + +#define PXPMC_PMC_VER_OFFS 16 /* PCI Power Management Capability Version*/ +#define PXPMC_PMC_VER_MASK (0x7 << PXPMC_PMC_VER_OFFS) + +#define PXPMC_DSI BIT21/* Device Specific Initialization */ + +#define PXPMC_AUX_CUR_OFFS 22 /* Auxiliary Current Requirements */ +#define PXPMC_AUX_CUR_MASK (0x7 << PXPMC_AUX_CUR_OFFS) + +#define PXPMC_D1_SUP BIT25 /* D1 Power Management support*/ + +#define PXPMC_D2_SUP BIT26 /* D2 Power Management support*/ + +#define PXPMC_PME_SUP_OFFS 27 /* PM Event generation support*/ +#define PXPMC_PME_SUP_MASK (0x1f << PXPMC_PME_SUP_OFFS) + +/* PCI Express Power Management Control and Status Register*/ +/*PEX_POWER_MNG_STATUS_CONTROL (PXPMSC)*/ + +#define PXPMSC_PM_STATE_OFFS 0 /* Power State */ +#define PXPMSC_PM_STATE_MASK (0x3 << PXPMSC_PM_STATE_OFFS) +#define PXPMSC_PM_STATE_D0 (0x0 << PXPMSC_PM_STATE_OFFS) +#define PXPMSC_PM_STATE_D1 (0x1 << PXPMSC_PM_STATE_OFFS) +#define PXPMSC_PM_STATE_D2 (0x2 << PXPMSC_PM_STATE_OFFS) +#define PXPMSC_PM_STATE_D3 (0x3 << PXPMSC_PM_STATE_OFFS) + +#define PXPMSC_PME_EN BIT8/* PM_PME Message Generation Enable */ + +#define PXPMSC_PM_DATA_SEL_OFFS 9 /* Data Select*/ +#define PXPMSC_PM_DATA_SEL_MASK (0xf << PXPMSC_PM_DATA_SEL_OFFS) + +#define PXPMSC_PM_DATA_SCALE_OFFS 13 /* Data Scale */ +#define PXPMSC_PM_DATA_SCALE_MASK (0x3 << PXPMSC_PM_DATA_SCALE_OFFS) + +#define PXPMSC_PME_STAT BIT15/* PME Status */ + +#define PXPMSC_PM_DATA_OFFS 24 /* State Data */ +#define PXPMSC_PM_DATA_MASK (0xff << PXPMSC_PM_DATA_OFFS) + + +/* PCI Express MSI Message Control Register*/ +/*PEX_MSI_MESSAGE_CONTROL (PXMMC)*/ + +#define PXMMC_CAP_ID_OFFS 0 /* Capability ID */ +#define PXMMC_CAP_ID_MASK (0xff << PXMMC_CAP_ID_OFFS) + +#define PXMMC_NEXT_PTR_OFFS 8 /* Next Item Pointer */ +#define PXMMC_NEXT_PTR_MASK (0xff << PXMMC_NEXT_PTR_OFFS) + +#define PXMMC_MSI_EN BIT18 /* MSI Enable */ + +#define PXMMC_MULTI_CAP_OFFS 17 /* Multiple Message Capable */ +#define PXMMC_MULTI_CAP_MASK (0x7 << PXMMC_MULTI_CAP_OFFS) + +#define PXMMC_MULTI_EN_OFFS 20 /* Multiple Messages Enable */ +#define PXMMC_MULTI_EN_MASK (0x7 << PXMMC_MULTI_EN_OFFS) + +#define PXMMC_ADDR64 BIT23 /* 64-bit Addressing Capable */ + + +/* PCI Express MSI Message Address Register*/ +/*PEX_MSI_MESSAGE_ADDR (PXMMA)*/ + +#define PXMMA_MSI_ADDR_OFFS 2 /* Message Address corresponds to + Address[31:2] of the MSI MWr TLP*/ +#define PXMMA_MSI_ADDR_MASK (0x3fffffff << PXMMA_MSI_ADDR_OFFS) + + +/* PCI Express MSI Message Address (High) Register */ +/*PEX_MSI_MESSAGE_HIGH_ADDR (PXMMHA)*/ + +#define PXMMA_MSI_ADDR_H_OFFS 0 /* Message Upper Address corresponds to + Address[63:32] of the MSI MWr TLP*/ +#define PXMMA_MSI_ADDR_H_MASK (0xffffffff << PXMMA_MSI_ADDR_H_OFFS ) + + +/* PCI Express MSI Message Data Register*/ +/*PEX_MSI_MESSAGE_DATA (PXMMD)*/ + +#define PXMMD_MSI_DATA_OFFS 0 /* Message Data */ +#define PXMMD_MSI_DATA_MASK (0xffff << PXMMD_MSI_DATA_OFFS ) + + +/* PCI Express Capability Register*/ +/*PEX_CAPABILITY_REG (PXCR)*/ + +#define PXCR_CAP_ID_OFFS 0 /* Capability ID*/ +#define PXCR_CAP_ID_MASK (0xff << PXCR_CAP_ID_OFFS) + +#define PXCR_NEXT_PTR_OFFS 8 /* Next Item Pointer*/ +#define PXCR_NEXT_PTR_MASK (0xff << PXCR_NEXT_PTR_OFFS) + +#define PXCR_CAP_VER_OFFS 16 /* Capability Version*/ +#define PXCR_CAP_VER_MASK (0xf << PXCR_CAP_VER_OFFS) + +#define PXCR_DEV_TYPE_OFFS 20 /* Device/Port Type*/ +#define PXCR_DEV_TYPE_MASK (0xf << PXCR_DEV_TYPE_OFFS) + +#define PXCR_SLOT_IMP BIT24 /* Slot Implemented*/ + +#define PXCR_INT_MSG_NUM_OFFS 25 /* Interrupt Message Number*/ +#define PXCR_INT_MSG_NUM_MASK (0x1f << PXCR_INT_MSG_NUM_OFFS) + + +/* PCI Express Device Capabilities Register */ +/*PEX_DEV_CAPABILITY_REG (PXDCR)*/ + +#define PXDCR_MAX_PLD_SIZE_SUP_OFFS 0 /* Maximum Payload Size Supported*/ +#define PXDCR_MAX_PLD_SIZE_SUP_MASK (0x7 << PXDCR_MAX_PLD_SIZE_SUP_OFFS) + +#define PXDCR_EP_L0S_ACC_LAT_OFFS 6/* Endpoint L0s Acceptable Latency*/ +#define PXDCR_EP_L0S_ACC_LAT_MASK (0x7 << PXDCR_EP_L0S_ACC_LAT_OFFS) +#define PXDCR_EP_L0S_ACC_LAT_64NS_LESS (0x0 << PXDCR_EP_L0S_ACC_LAT_OFFS) +#define PXDCR_EP_L0S_ACC_LAT_64NS_128NS (0x1 << PXDCR_EP_L0S_ACC_LAT_OFFS) +#define PXDCR_EP_L0S_ACC_LAT_128NS_256NS (0x2 << PXDCR_EP_L0S_ACC_LAT_OFFS) +#define PXDCR_EP_L0S_ACC_LAT_256NS_512NS (0x3 << PXDCR_EP_L0S_ACC_LAT_OFFS) +#define PXDCR_EP_L0S_ACC_LAT_512NS_1US (0x4 << PXDCR_EP_L0S_ACC_LAT_OFFS) +#define PXDCR_EP_L0S_ACC_LAT_1US_2US (0x5 << PXDCR_EP_L0S_ACC_LAT_OFFS) +#define PXDCR_EP_L0S_ACC_LAT_2US_4US (0x6 << PXDCR_EP_L0S_ACC_LAT_OFFS) +#define PXDCR_EP_L0S_ACC_LAT_4US_MORE (0x7 << PXDCR_EP_L0S_ACC_LAT_OFFS) + +#define PXDCR_EP_L1_ACC_LAT_OFFS 9 /* Endpoint L1 Acceptable Latency*/ +#define PXDCR_EP_L1_ACC_LAT_MASK (0x7 << PXDCR_EP_L1_ACC_LAT_OFFS) +#define PXDCR_EP_L1_ACC_LAT_64NS_LESS (0x0 << PXDCR_EP_L1_ACC_LAT_OFFS) +#define PXDCR_EP_L1_ACC_LAT_64NS_128NS (0x1 << PXDCR_EP_L1_ACC_LAT_OFFS) +#define PXDCR_EP_L1_ACC_LAT_128NS_256NS (0x2 << PXDCR_EP_L1_ACC_LAT_OFFS) +#define PXDCR_EP_L1_ACC_LAT_256NS_512NS (0x3 << PXDCR_EP_L1_ACC_LAT_OFFS) +#define PXDCR_EP_L1_ACC_LAT_512NS_1US (0x4 << PXDCR_EP_L1_ACC_LAT_OFFS) +#define PXDCR_EP_L1_ACC_LAT_1US_2US (0x5 << PXDCR_EP_L1_ACC_LAT_OFFS) +#define PXDCR_EP_L1_ACC_LAT_2US_4US (0x6 << PXDCR_EP_L1_ACC_LAT_OFFS) +#define PXDCR_EP_L1_ACC_LAT_4US_MORE (0x7 << PXDCR_EP_L1_ACC_LAT_OFFS) + + +#define PXDCR_ATT_BUT_PRS_OFFS 12 /* Attention Button Present*/ +#define PXDCR_ATT_BUT_PRS_MASK BIT12 +#define PXDCR_ATT_BUT_PRS_IMPLEMENTED BIT12 + +#define PXDCR_ATT_IND_PRS_OFFS 13 /* Attention Indicator Present*/ +#define PXDCR_ATT_IND_PRS_MASK BIT13 +#define PXDCR_ATT_IND_PRS_IMPLEMENTED BIT13 + +#define PXDCR_PWR_IND_PRS_OFFS 14/* Power Indicator Present*/ +#define PXDCR_PWR_IND_PRS_MASK BIT14 +#define PXDCR_PWR_IND_PRS_IMPLEMENTED BIT14 + +#define PXDCR_CAP_SPL_VAL_OFFS 18 /*Captured Slot Power Limit + Value*/ +#define PXDCR_CAP_SPL_VAL_MASK (0xff << PXDCR_CAP_SPL_VAL_OFFS) + +#define PXDCR_CAP_SP_LSCL_OFFS 26 /* Captured Slot Power Limit + Scale */ +#define PXDCR_CAP_SP_LSCL_MASK (0x3 << PXDCR_CAP_SP_LSCL_OFFS) + +/* PCI Express Device Control Status Register */ +/*PEX_DEV_CTRL_STAT_REG (PXDCSR)*/ + +#define PXDCSR_COR_ERR_REP_EN BIT0 /* Correctable Error Reporting Enable*/ +#define PXDCSR_NF_ERR_REP_EN BIT1 /* Non-Fatal Error Reporting Enable*/ +#define PXDCSR_F_ERR_REP_EN BIT2 /* Fatal Error Reporting Enable*/ +#define PXDCSR_UR_REP_EN BIT3 /* Unsupported Request (UR) + Reporting Enable*/ +#define PXDCSR_EN_RO BIT4 /* Enable Relaxed Ordering*/ + +#define PXDCSR_MAX_PLD_SZ_OFFS 5 /* Maximum Payload Size*/ +#define PXDCSR_MAX_PLD_SZ_MASK (0x7 << PXDCSR_MAX_PLD_SZ_OFFS) +#define PXDCSR_MAX_PLD_SZ_128B (0x0 << PXDCSR_MAX_PLD_SZ_OFFS) +#define PXDCSR_EN_NS BIT11 /* Enable No Snoop*/ + +#define PXDCSR_MAX_RD_RQ_SZ_OFFS 12 /* Maximum Read Request Size*/ +#define PXDCSR_MAX_RD_RQ_SZ_MASK (0x7 << PXDCSR_MAX_RD_RQ_SZ_OFFS) +#define PXDCSR_MAX_RD_RQ_SZ_128B (0x0 << PXDCSR_MAX_RD_RQ_SZ_OFFS) +#define PXDCSR_MAX_RD_RQ_SZ_256B (0x1 << PXDCSR_MAX_RD_RQ_SZ_OFFS) +#define PXDCSR_MAX_RD_RQ_SZ_512B (0x2 << PXDCSR_MAX_RD_RQ_SZ_OFFS) +#define PXDCSR_MAX_RD_RQ_SZ_1KB (0x3 << PXDCSR_MAX_RD_RQ_SZ_OFFS) +#define PXDCSR_MAX_RD_RQ_SZ_2KB (0x4 << PXDCSR_MAX_RD_RQ_SZ_OFFS) +#define PXDCSR_MAX_RD_RQ_SZ_4KB (0x5 << PXDCSR_MAX_RD_RQ_SZ_OFFS) + +#define PXDCSR_COR_ERR_DET BIT16 /* Correctable Error Detected*/ +#define PXDCSR_NF_ERR_DET BIT17 /* Non-Fatal Error Detected.*/ +#define PXDCSR_F_ERR_DET BIT18 /* Fatal Error Detected.*/ +#define PXDCSR_UR_DET BIT19 /* Unsupported Request Detected */ +#define PXDCSR_AUX_PWR_DET BIT20 /* Reserved*/ + +#define PXDCSR_TRANS_PEND_OFFS 21 /* Transactions Pending*/ +#define PXDCSR_TRANS_PEND_MASK BIT21 +#define PXDCSR_TRANS_PEND_NOT_COMPLETED (0x1 << PXDCSR_TRANS_PEND_OFFS) + + +/* PCI Express Link Capabilities Register*/ +/*PEX_LINK_CAPABILITY_REG (PXLCR)*/ + +#define PXLCR_MAX_LINK_SPD_OFFS 0 /* Maximum Link Speed*/ +#define PXLCR_MAX_LINK_SPD_MASK (0xf << PXLCR_MAX_LINK_SPD_OFFS) + +#define PXLCR_MAX_LNK_WDTH_OFFS 3 /* Maximum Link Width*/ +#define PXLCR_MAX_LNK_WDTH_MASK (0x3f << PXLCR_MAX_LNK_WDTH_OFFS) + +#define PXLCR_ASPM_SUP_OFFS 10 /* Active State Link PM Support*/ +#define PXLCR_ASPM_SUP_MASK (0x3 << PXLCR_ASPM_SUP_OFFS) + +#define PXLCR_L0S_EXT_LAT_OFFS 12 /* L0s Exit Latency*/ +#define PXLCR_L0S_EXT_LAT_MASK (0x7 << PXLCR_L0S_EXT_LAT_OFFS) +#define PXLCR_L0S_EXT_LAT_64NS_LESS (0x0 << PXDCR_EP_L1_ACC_LAT_OFFS) +#define PXLCR_L0S_EXT_LAT_64NS_128NS (0x1 << PXDCR_EP_L1_ACC_LAT_OFFS) +#define PXLCR_L0S_EXT_LAT_128NS_256NS (0x2 << PXDCR_EP_L1_ACC_LAT_OFFS) +#define PXLCR_L0S_EXT_LAT_256NS_512NS (0x3 << PXDCR_EP_L1_ACC_LAT_OFFS) +#define PXLCR_L0S_EXT_LAT_512NS_1US (0x4 << PXDCR_EP_L1_ACC_LAT_OFFS) +#define PXLCR_L0S_EXT_LAT_1US_2US (0x5 << PXDCR_EP_L1_ACC_LAT_OFFS) +#define PXLCR_L0S_EXT_LAT_2US_4US (0x6 << PXDCR_EP_L1_ACC_LAT_OFFS) + +#define PXLCR_POR_TNUM_OFFS 24 /* Port Number */ +#define PXLCR_POR_TNUM_MASK (0xff << PXLCR_POR_TNUM_OFFS) + +/* PCI Express Link Control Status Register */ +/*PEX_LINK_CTRL_STAT_REG (PXLCSR)*/ + +#define PXLCSR_ASPM_CNT_OFFS 0 /* Active State Link PM Control */ +#define PXLCSR_ASPM_CNT_MASK (0x3 << PXLCSR_ASPM_CNT_OFFS) +#define PXLCSR_ASPM_CNT_DISABLED (0x0 << PXLCSR_ASPM_CNT_OFFS) +#define PXLCSR_ASPM_CNT_L0S_ENT_SUPP (0x1 << PXLCSR_ASPM_CNT_OFFS) +#define PXLCSR_ASPM_CNT_L1S_ENT_SUPP (0x2 << PXLCSR_ASPM_CNT_OFFS) +#define PXLCSR_ASPM_CNT_L0S_L1S_ENT_SUPP (0x3 << PXLCSR_ASPM_CNT_OFFS) + +#define PXLCSR_RCB_OFFS 3 /* Read Completion Boundary */ +#define PXLCSR_RCB_MASK BIT3 +#define PXLCSR_RCB_64B (0 << PXLCSR_RCB_OFFS) +#define PXLCSR_RCB_128B (1 << PXLCSR_RCB_OFFS) + +#define PXLCSR_LNK_DIS BIT4 /* Link Disable */ +#define PXLCSR_RETRN_LNK BIT5 /* Retrain Link */ +#define PXLCSR_CMN_CLK_CFG BIT6 /* Common Clock Configuration */ +#define PXLCSR_EXTD_SNC BIT7 /* Extended Sync */ + +#define PXLCSR_LNK_SPD_OFFS 16 /* Link Speed */ +#define PXLCSR_LNK_SPD_MASK (0xf << PXLCSR_LNK_SPD_OFFS) + +#define PXLCSR_NEG_LNK_WDTH_OFFS 20 /* Negotiated Link Width */ +#define PXLCSR_NEG_LNK_WDTH_MASK (0x3f << PXLCSR_NEG_LNK_WDTH_OFFS) +#define PXLCSR_NEG_LNK_WDTH_X1 (0x1 << PXLCSR_NEG_LNK_WDTH_OFFS) + +#define PXLCSR_LNK_TRN BIT27 /* Link Training */ + +#define PXLCSR_SLT_CLK_CFG_OFFS 28 /* Slot Clock Configuration */ +#define PXLCSR_SLT_CLK_CFG_MASK BIT28 +#define PXLCSR_SLT_CLK_CFG_INDPNT (0x0 << PXLCSR_SLT_CLK_CFG_OFFS) +#define PXLCSR_SLT_CLK_CFG_REF (0x1 << PXLCSR_SLT_CLK_CFG_OFFS) + +/* PCI Express Advanced Error Report Header Register */ +/*PEX_ADV_ERR_RPRT_HDR_TRGT_REG (PXAERHTR)*/ + +/* PCI Express Uncorrectable Error Status Register*/ +/*PEX_UNCORRECT_ERR_STAT_REG (PXUESR)*/ + +/* PCI Express Uncorrectable Error Mask Register */ +/*PEX_UNCORRECT_ERR_MASK_REG (PXUEMR)*/ + +/* PCI Express Uncorrectable Error Severity Register */ +/*PEX_UNCORRECT_ERR_SERVITY_REG (PXUESR)*/ + +/* PCI Express Correctable Error Status Register */ +/*PEX_CORRECT_ERR_STAT_REG (PXCESR)*/ + +/* PCI Express Correctable Error Mask Register */ +/*PEX_CORRECT_ERR_MASK_REG (PXCEMR)*/ + +/* PCI Express Advanced Error Capability and Control Register*/ +/*PEX_ADV_ERR_CAPABILITY_CTRL_REG (PXAECCR)*/ + +/* PCI Express Header Log First DWORD Register*/ +/*PEX_HDR_LOG_FIRST_DWORD_REG (PXHLFDR)*/ + +/* PCI Express Header Log Second DWORD Register*/ +/*PEX_HDR_LOG_SECOND_DWORD_REG (PXHLSDR)*/ + +/* PCI Express Header Log Third DWORD Register*/ +/*PEX_HDR_LOG_THIRD_DWORD_REG (PXHLTDR)*/ + +/* PCI Express Header Log Fourth DWORD Register*/ +/*PEX_HDR_LOG_FOURTH_DWORD_REG (PXHLFDR)*/ + +#ifdef __cplusplus +} +#endif /* __cplusplus */ + +#endif /* #ifndef __INCPEXREGSH */ + + diff --git a/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/mv_hal/pex/mvVrtBrgPex.c b/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/mv_hal/pex/mvVrtBrgPex.c new file mode 100644 index 0000000000..13d2f87261 --- /dev/null +++ b/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/mv_hal/pex/mvVrtBrgPex.c @@ -0,0 +1,313 @@ +/******************************************************************************* +Copyright (C) Marvell International Ltd. and its affiliates + +This software file (the "File") is owned and distributed by Marvell +International Ltd. and/or its affiliates ("Marvell") under the following +alternative licensing terms. Once you have made an election to distribute the +File under one of the following license alternatives, please (i) delete this +introductory statement regarding license alternatives, (ii) delete the two +license alternatives that you have not elected to use and (iii) preserve the +Marvell copyright notice above. + +******************************************************************************** +Marvell Commercial License Option + +If you received this File from Marvell and you have entered into a commercial +license agreement (a "Commercial License") with Marvell, the File is licensed +to you under the terms of the applicable Commercial License. + +******************************************************************************** +Marvell GPL License Option + +If you received this File from Marvell, you may opt to use, redistribute and/or +modify this File in accordance with the terms and conditions of the General +Public License Version 2, June 1991 (the "GPL License"), a copy of which is +available along with the File in the license.txt file or by writing to the Free +Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or +on the worldwide web at http://www.gnu.org/licenses/gpl.txt. + +THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED +WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY +DISCLAIMED. The GPL License provides additional details about this warranty +disclaimer. +******************************************************************************** +Marvell BSD License Option + +If you received this File from Marvell, you may opt to use, redistribute and/or +modify this File under the following licensing terms. +Redistribution and use in source and binary forms, with or without modification, +are permitted provided that the following conditions are met: + + * Redistributions of source code must retain the above copyright notice, + this list of conditions and the following disclaimer. + + * Redistributions in binary form must reproduce the above copyright + notice, this list of conditions and the following disclaimer in the + documentation and/or other materials provided with the distribution. + + * Neither the name of Marvell nor the names of its contributors may be + used to endorse or promote products derived from this software without + specific prior written permission. + +THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND +ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED +WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE +DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR +ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES +(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; +LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON +ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS +SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + +*******************************************************************************/ + +#include "mvPex.h" + +//#define MV_DEBUG +/* defines */ +#ifdef MV_DEBUG + #define DB(x) x +#else + #define DB(x) +#endif + +/* locals */ +typedef struct +{ + MV_U32 data; + MV_U32 mask; +}PEX_HEADER_DATA; + +/* local function forwad decleration */ +MV_U32 mvPexHwConfigRead (MV_U32 pexIf, MV_U32 bus, MV_U32 dev, MV_U32 func, + MV_U32 regOff); +MV_STATUS mvPexHwConfigWrite(MV_U32 pexIf, MV_U32 bus, MV_U32 dev, + MV_U32 func, MV_U32 regOff, MV_U32 data); +void resetPexConfig(MV_U32 pexIf, MV_U32 bus, MV_U32 dev); + + +PEX_HEADER_DATA configHdr[16] = +{ +{0x888811ab, 0x00000000}, /*[device ID, vendor ID] */ +{0x00100007, 0x0000ffff}, /*[status register, command register] */ +{0x0604000e, 0x00000000}, /*[programming interface, sub class code, class code, revision ID] */ +{0x00010008, 0x00000000}, /*[BIST, header type, latency time, cache line] */ +{0x00000000, 0x00000000}, /*[base address 0] */ +{0x00000000, 0x00000000}, /*[base address 1] */ +{0x00000000, 0x00ffffff}, /*[secondary latency timersubordinate bus number, secondary bus number, primary bus number] */ +{0x0000f101, 0x00000000}, /*[secondary status ,IO limit, IO base] */ +{0x9ff0a000, 0x00000000}, /*[memory limit, memory base] */ +{0x0001fff1, 0x00000000}, /*[prefetch memory limit, prefetch memory base] */ +{0xffffffff, 0x00000000}, /*[prefetch memory base upper] */ +{0x00000000, 0x00000000}, /*[prefetch memory limit upper] */ +{0xeffff000, 0x00000000}, /*[IO limit upper 16 bits, IO base upper 16 bits] */ +{0x00000000, 0x00000000}, /*[reserved, capability pointer] */ +{0x00000000, 0x00000000}, /*[expansion ROM base address] */ +{0x00000000, 0x000000FF}, /*[bridge control, interrupt pin, interrupt line] */ +}; + + +#define HEADER_WRITE(data, offset) configHdr[offset/4].data = ((configHdr[offset/4].data & ~configHdr[offset/4].mask) | \ + (data & configHdr[offset/4].mask)) +#define HEADER_READ(offset) configHdr[offset/4].data + +/******************************************************************************* +* mvVrtBrgPexInit - Initialize PEX interfaces +* +* DESCRIPTION: +* +* This function is responsible of intialization of the Pex Interface , It +* configure the Pex Bars and Windows in the following manner: +* +* Assumptions : +* Bar0 is always internal registers bar +* Bar1 is always the DRAM bar +* Bar2 is always the Device bar +* +* 1) Sets the Internal registers bar base by obtaining the base from +* the CPU Interface +* 2) Sets the DRAM bar base and size by getting the base and size from +* the CPU Interface when the size is the sum of all enabled DRAM +* chip selects and the base is the base of CS0 . +* 3) Sets the Device bar base and size by getting these values from the +* CPU Interface when the base is the base of the lowest base of the +* Device chip selects, and the +* +* +* INPUT: +* +* pexIf - PEX interface number. +* +* +* OUTPUT: +* None. +* +* RETURN: +* MV_OK if function success otherwise MV_ERROR or MV_BAD_PARAM +* +*******************************************************************************/ +MV_STATUS mvPexVrtBrgInit(MV_U32 pexIf) +{ + /* reset PEX tree to recover previous U-boot/Boot configurations */ + MV_U32 localBus = mvPexLocalBusNumGet(pexIf); + + + resetPexConfig(pexIf, localBus, 1); + return MV_OK; +} + + +MV_U32 mvPexVrtBrgConfigRead (MV_U32 pexIf, MV_U32 bus, MV_U32 dev, MV_U32 func, + MV_U32 regOff) +{ + + MV_U32 localBus = mvPexLocalBusNumGet(pexIf); + MV_U32 localDev = mvPexLocalDevNumGet(pexIf); + MV_U32 val; + if(bus == localBus) + { + if(dev > 1) + { +/* on the local device allow only device #0 & #1 */ + return 0xffffffff; + } + else + if (dev == localDev) + { + /* read the memory controller registers */ + return mvPexHwConfigRead (pexIf, bus, dev, func, regOff); + } + else + { + /* access the virtual brg header */ + return HEADER_READ(regOff); + } + } + else + if(bus == (localBus + 1)) + { + /* access the device behind the virtual bridge */ + if((dev == localDev) || (dev > 1)) + { + return 0xffffffff; + } + else + { + /* access the device behind the virtual bridge, in this case + * change the bus number to the local bus number in order to + * generate type 0 config cycle + */ + mvPexLocalBusNumSet(pexIf, bus); + mvPexLocalDevNumSet(pexIf, 1); + val = mvPexHwConfigRead (pexIf, bus, 0, func, regOff); + mvPexLocalBusNumSet(pexIf, localBus); + mvPexLocalDevNumSet(pexIf, localDev); + return val; + } + } + /* for all other devices use the HW function to get the + * requested registers + */ + mvPexLocalDevNumSet(pexIf, 1); + val = mvPexHwConfigRead (pexIf, bus, dev, func, regOff); + mvPexLocalDevNumSet(pexIf, localDev); + return val; +} + + +MV_STATUS mvPexVrtBrgConfigWrite(MV_U32 pexIf, MV_U32 bus, MV_U32 dev, + MV_U32 func, MV_U32 regOff, MV_U32 data) +{ + MV_U32 localBus = mvPexLocalBusNumGet(pexIf); + MV_U32 localDev = mvPexLocalDevNumGet(pexIf); + MV_STATUS status; + + if(bus == localBus) + { + if(dev > 1) + { + /* on the local device allow only device #0 & #1 */ + return MV_ERROR; + } + else + if (dev == localDev) + { + /* read the memory controller registers */ + return mvPexHwConfigWrite (pexIf, bus, dev, func, regOff, data); + } + else + { + /* access the virtual brg header */ + HEADER_WRITE(data, regOff); + return MV_OK; + } + } + else + if(bus == (localBus + 1)) + { + /* access the device behind the virtual bridge */ + if((dev == localDev) || (dev > 1)) + { + return MV_ERROR; + } + else + { + /* access the device behind the virtual bridge, in this case + * change the bus number to the local bus number in order to + * generate type 0 config cycle + */ + //return mvPexHwConfigWrite (pexIf, localBus, dev, func, regOff, data); + mvPexLocalBusNumSet(pexIf, bus); + mvPexLocalDevNumSet(pexIf, 1); + status = mvPexHwConfigWrite (pexIf, bus, 0, func, regOff, data); + mvPexLocalBusNumSet(pexIf, localBus); + mvPexLocalDevNumSet(pexIf, localDev); + return status; + + } + } + /* for all other devices use the HW function to get the + * requested registers + */ + mvPexLocalDevNumSet(pexIf, 1); + status = mvPexHwConfigWrite (pexIf, bus, dev, func, regOff, data); + mvPexLocalDevNumSet(pexIf, localDev); + return status; +} + + + + +void resetPexConfig(MV_U32 pexIf, MV_U32 bus, MV_U32 dev) +{ + MV_U32 tData; + MV_U32 i; + + /* restore the PEX configuration to initialization state */ + /* in case PEX P2P call recursive and reset config */ + tData = mvPexHwConfigRead (pexIf, bus, dev, 0x0, 0x0); + if(tData != 0xffffffff) + { + /* agent had been found - check whether P2P */ + tData = mvPexHwConfigRead (pexIf, bus, dev, 0x0, 0x8); + if((tData & 0xffff0000) == 0x06040000) + {/* P2P */ + /* get the sec bus and the subordinate */ + MV_U32 secBus; + tData = mvPexHwConfigRead (pexIf, bus, dev, 0x0, 0x18); + secBus = ((tData >> 8) & 0xff); + /* now scan on sec bus */ + for(i = 0;i < 0xff;i++) + { + resetPexConfig(pexIf, secBus, i); + } + /* now reset this device */ + DB(mvOsPrintf("Reset bus %d dev %d\n", bus, dev)); + mvPexHwConfigWrite(pexIf, bus, dev, 0x0, 0x18, 0x0); + DB(mvOsPrintf("Reset bus %d dev %d\n", bus, dev)); + } + } +} + + diff --git a/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/mv_hal/pex/mvVrtBrgPex.h b/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/mv_hal/pex/mvVrtBrgPex.h new file mode 100644 index 0000000000..d01f0248ad --- /dev/null +++ b/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/mv_hal/pex/mvVrtBrgPex.h @@ -0,0 +1,82 @@ +/******************************************************************************* +Copyright (C) Marvell International Ltd. and its affiliates + +This software file (the "File") is owned and distributed by Marvell +International Ltd. and/or its affiliates ("Marvell") under the following +alternative licensing terms. Once you have made an election to distribute the +File under one of the following license alternatives, please (i) delete this +introductory statement regarding license alternatives, (ii) delete the two +license alternatives that you have not elected to use and (iii) preserve the +Marvell copyright notice above. + +******************************************************************************** +Marvell Commercial License Option + +If you received this File from Marvell and you have entered into a commercial +license agreement (a "Commercial License") with Marvell, the File is licensed +to you under the terms of the applicable Commercial License. + +******************************************************************************** +Marvell GPL License Option + +If you received this File from Marvell, you may opt to use, redistribute and/or +modify this File in accordance with the terms and conditions of the General +Public License Version 2, June 1991 (the "GPL License"), a copy of which is +available along with the File in the license.txt file or by writing to the Free +Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or +on the worldwide web at http://www.gnu.org/licenses/gpl.txt. + +THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED +WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY +DISCLAIMED. The GPL License provides additional details about this warranty +disclaimer. +******************************************************************************** +Marvell BSD License Option + +If you received this File from Marvell, you may opt to use, redistribute and/or +modify this File under the following licensing terms. +Redistribution and use in source and binary forms, with or without modification, +are permitted provided that the following conditions are met: + + * Redistributions of source code must retain the above copyright notice, + this list of conditions and the following disclaimer. + + * Redistributions in binary form must reproduce the above copyright + notice, this list of conditions and the following disclaimer in the + documentation and/or other materials provided with the distribution. + + * Neither the name of Marvell nor the names of its contributors may be + used to endorse or promote products derived from this software without + specific prior written permission. + +THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND +ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED +WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE +DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR +ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES +(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; +LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON +ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS +SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + +*******************************************************************************/ + +#ifndef __INCVRTBRGPEXH +#define __INCVRTBRGPEXH + + +/* Global Functions prototypes */ +/* mvPexInit - Initialize PEX interfaces*/ +MV_STATUS mvPexVrtBrgInit(MV_U32 pexIf); + +/* mvPexConfigRead - Read from configuration space */ +MV_U32 mvPexVrtBrgConfigRead (MV_U32 pexIf, MV_U32 bus, MV_U32 dev, + MV_U32 func,MV_U32 regOff); + +/* mvPexConfigWrite - Write to configuration space */ +MV_STATUS mvPexVrtBrgConfigWrite(MV_U32 pexIf, MV_U32 bus, MV_U32 dev, + MV_U32 func, MV_U32 regOff, MV_U32 data); + + +#endif /* #ifndef __INCPEXH */ diff --git a/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/mv_hal/sflash/mvSFlash.c b/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/mv_hal/sflash/mvSFlash.c new file mode 100644 index 0000000000..6c5bc191cc --- /dev/null +++ b/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/mv_hal/sflash/mvSFlash.c @@ -0,0 +1,1522 @@ +/******************************************************************************* +Copyright (C) Marvell International Ltd. and its affiliates + +This software file (the "File") is owned and distributed by Marvell +International Ltd. and/or its affiliates ("Marvell") under the following +alternative licensing terms. Once you have made an election to distribute the +File under one of the following license alternatives, please (i) delete this +introductory statement regarding license alternatives, (ii) delete the two +license alternatives that you have not elected to use and (iii) preserve the +Marvell copyright notice above. + +******************************************************************************** +Marvell Commercial License Option + +If you received this File from Marvell and you have entered into a commercial +license agreement (a "Commercial License") with Marvell, the File is licensed +to you under the terms of the applicable Commercial License. + +******************************************************************************** +Marvell GPL License Option + +If you received this File from Marvell, you may opt to use, redistribute and/or +modify this File in accordance with the terms and conditions of the General +Public License Version 2, June 1991 (the "GPL License"), a copy of which is +available along with the File in the license.txt file or by writing to the Free +Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or +on the worldwide web at http://www.gnu.org/licenses/gpl.txt. + +THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED +WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY +DISCLAIMED. The GPL License provides additional details about this warranty +disclaimer. +******************************************************************************** +Marvell BSD License Option + +If you received this File from Marvell, you may opt to use, redistribute and/or +modify this File under the following licensing terms. +Redistribution and use in source and binary forms, with or without modification, +are permitted provided that the following conditions are met: + + * Redistributions of source code must retain the above copyright notice, + this list of conditions and the following disclaimer. + + * Redistributions in binary form must reproduce the above copyright + notice, this list of conditions and the following disclaimer in the + documentation and/or other materials provided with the distribution. + + * Neither the name of Marvell nor the names of its contributors may be + used to endorse or promote products derived from this software without + specific prior written permission. + +THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND +ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED +WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE +DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR +ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES +(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; +LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON +ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS +SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + +*******************************************************************************/ +#include "mvOs.h" +#include "sflash/mvSFlash.h" +#include "sflash/mvSFlashSpec.h" +#include "spi/mvSpi.h" +#include "spi/mvSpiCmnd.h" +#include "ctrlEnv/mvCtrlEnvLib.h" + +/*#define MV_DEBUG*/ +#ifdef MV_DEBUG +#define DB(x) x +#else +#define DB(x) +#endif + +/* Globals */ +static MV_SFLASH_DEVICE_PARAMS sflash[] = { + /* ST M25P32 SPI flash, 4MB, 64 sectors of 64K each */ + { + MV_M25P_WREN_CMND_OPCD, + MV_M25P_WRDI_CMND_OPCD, + MV_M25P_RDID_CMND_OPCD, + MV_M25P_RDSR_CMND_OPCD, + MV_M25P_WRSR_CMND_OPCD, + MV_M25P_READ_CMND_OPCD, + MV_M25P_FAST_RD_CMND_OPCD, + MV_M25P_PP_CMND_OPCD, + MV_M25P_SE_CMND_OPCD, + MV_M25P_BE_CMND_OPCD, + MV_M25P_RES_CMND_OPCD, + MV_SFLASH_NO_SPECIFIC_OPCD, /* power save not supported */ + MV_M25P32_SECTOR_SIZE, + MV_M25P32_SECTOR_NUMBER, + MV_M25P_PAGE_SIZE, + "ST M25P32", + MV_M25PXXX_ST_MANF_ID, + MV_M25P32_DEVICE_ID, + MV_M25P32_MAX_SPI_FREQ, + MV_M25P32_MAX_FAST_SPI_FREQ, + MV_M25P32_FAST_READ_DUMMY_BYTES + }, + /* ST M25P64 SPI flash, 8MB, 128 sectors of 64K each */ + { + MV_M25P_WREN_CMND_OPCD, + MV_M25P_WRDI_CMND_OPCD, + MV_M25P_RDID_CMND_OPCD, + MV_M25P_RDSR_CMND_OPCD, + MV_M25P_WRSR_CMND_OPCD, + MV_M25P_READ_CMND_OPCD, + MV_M25P_FAST_RD_CMND_OPCD, + MV_M25P_PP_CMND_OPCD, + MV_M25P_SE_CMND_OPCD, + MV_M25P_BE_CMND_OPCD, + MV_M25P_RES_CMND_OPCD, + MV_SFLASH_NO_SPECIFIC_OPCD, /* power save not supported */ + MV_M25P64_SECTOR_SIZE, + MV_M25P64_SECTOR_NUMBER, + MV_M25P_PAGE_SIZE, + "ST M25P64", + MV_M25PXXX_ST_MANF_ID, + MV_M25P64_DEVICE_ID, + MV_M25P64_MAX_SPI_FREQ, + MV_M25P64_MAX_FAST_SPI_FREQ, + MV_M25P64_FAST_READ_DUMMY_BYTES + }, + /* ST M25P128 SPI flash, 16MB, 64 sectors of 256K each */ + { + MV_M25P_WREN_CMND_OPCD, + MV_M25P_WRDI_CMND_OPCD, + MV_M25P_RDID_CMND_OPCD, + MV_M25P_RDSR_CMND_OPCD, + MV_M25P_WRSR_CMND_OPCD, + MV_M25P_READ_CMND_OPCD, + MV_M25P_FAST_RD_CMND_OPCD, + MV_M25P_PP_CMND_OPCD, + MV_M25P_SE_CMND_OPCD, + MV_M25P_BE_CMND_OPCD, + MV_M25P_RES_CMND_OPCD, + MV_SFLASH_NO_SPECIFIC_OPCD, /* power save not supported */ + MV_M25P128_SECTOR_SIZE, + MV_M25P128_SECTOR_NUMBER, + MV_M25P_PAGE_SIZE, + "ST M25P128", + MV_M25PXXX_ST_MANF_ID, + MV_M25P128_DEVICE_ID, + MV_M25P128_MAX_SPI_FREQ, + MV_M25P128_MAX_FAST_SPI_FREQ, + MV_M25P128_FAST_READ_DUMMY_BYTES + }, + /* Macronix MXIC MX25L6405 SPI flash, 8MB, 128 sectors of 64K each */ + { + MV_MX25L_WREN_CMND_OPCD, + MV_MX25L_WRDI_CMND_OPCD, + MV_MX25L_RDID_CMND_OPCD, + MV_MX25L_RDSR_CMND_OPCD, + MV_MX25L_WRSR_CMND_OPCD, + MV_MX25L_READ_CMND_OPCD, + MV_MX25L_FAST_RD_CMND_OPCD, + MV_MX25L_PP_CMND_OPCD, + MV_MX25L_SE_CMND_OPCD, + MV_MX25L_BE_CMND_OPCD, + MV_MX25L_RES_CMND_OPCD, + MV_MX25L_DP_CMND_OPCD, + MV_MX25L6405_SECTOR_SIZE, + MV_MX25L6405_SECTOR_NUMBER, + MV_MXIC_PAGE_SIZE, + "MXIC MX25L6405", + MV_MXIC_MANF_ID, + MV_MX25L6405_DEVICE_ID, + MV_MX25L6405_MAX_SPI_FREQ, + MV_MX25L6405_MAX_FAST_SPI_FREQ, + MV_MX25L6405_FAST_READ_DUMMY_BYTES + }, + /* SPANSION S25FL128P SPI flash, 16MB, 64 sectors of 256K each */ + { + MV_S25FL_WREN_CMND_OPCD, + MV_S25FL_WRDI_CMND_OPCD, + MV_S25FL_RDID_CMND_OPCD, + MV_S25FL_RDSR_CMND_OPCD, + MV_S25FL_WRSR_CMND_OPCD, + MV_S25FL_READ_CMND_OPCD, + MV_S25FL_FAST_RD_CMND_OPCD, + MV_S25FL_PP_CMND_OPCD, + MV_S25FL_SE_CMND_OPCD, + MV_S25FL_BE_CMND_OPCD, + MV_S25FL_RES_CMND_OPCD, + MV_S25FL_DP_CMND_OPCD, + MV_S25FL128_SECTOR_SIZE, + MV_S25FL128_SECTOR_NUMBER, + MV_S25FL_PAGE_SIZE, + "SPANSION S25FL128", + MV_SPANSION_MANF_ID, + MV_S25FL128_DEVICE_ID, + MV_S25FL128_MAX_SPI_FREQ, + MV_M25P128_MAX_FAST_SPI_FREQ, + MV_M25P128_FAST_READ_DUMMY_BYTES + } +}; + +/* Static Functions */ +static MV_STATUS mvWriteEnable (MV_SFLASH_INFO * pFlinfo); +static MV_STATUS mvStatusRegGet (MV_SFLASH_INFO * pFlinfo, MV_U8 * pStatReg); +static MV_STATUS mvStatusRegSet (MV_SFLASH_INFO * pFlinfo, MV_U8 sr); +static MV_STATUS mvWaitOnWipClear(MV_SFLASH_INFO * pFlinfo); +static MV_STATUS mvSFlashPageWr (MV_SFLASH_INFO * pFlinfo, MV_U32 offset, \ + MV_U8* pPageBuff, MV_U32 buffSize); +static MV_STATUS mvSFlashWithDefaultsIdGet (MV_SFLASH_INFO * pFlinfo, \ + MV_U8* manId, MV_U16* devId); + +/******************************************************************************* +* mvWriteEnable - serialize the write enable sequence +* +* DESCRIPTION: +* transmit the sequence for write enable +* +********************************************************************************/ +static MV_STATUS mvWriteEnable(MV_SFLASH_INFO * pFlinfo) +{ + MV_U8 cmd[MV_SFLASH_WREN_CMND_LENGTH]; + + + cmd[0] = sflash[pFlinfo->index].opcdWREN; + + return mvSpiWriteThenRead(cmd, MV_SFLASH_WREN_CMND_LENGTH, NULL, 0, 0); +} + +/******************************************************************************* +* mvStatusRegGet - Retrieve the value of the status register +* +* DESCRIPTION: +* perform the RDSR sequence to get the 8bit status register +* +********************************************************************************/ +static MV_STATUS mvStatusRegGet(MV_SFLASH_INFO * pFlinfo, MV_U8 * pStatReg) +{ + MV_STATUS ret; + MV_U8 cmd[MV_SFLASH_RDSR_CMND_LENGTH]; + MV_U8 sr[MV_SFLASH_RDSR_REPLY_LENGTH]; + + + + + cmd[0] = sflash[pFlinfo->index].opcdRDSR; + + if ((ret = mvSpiWriteThenRead(cmd, MV_SFLASH_RDSR_CMND_LENGTH, sr, + MV_SFLASH_RDSR_REPLY_LENGTH,0)) != MV_OK) + return ret; + + *pStatReg = sr[0]; + + return MV_OK; +} + +/******************************************************************************* +* mvWaitOnWipClear - Block waiting for the WIP (write in progress) to be cleared +* +* DESCRIPTION: +* Block waiting for the WIP (write in progress) to be cleared +* +********************************************************************************/ +static MV_STATUS mvWaitOnWipClear(MV_SFLASH_INFO * pFlinfo) +{ + MV_STATUS ret; + MV_U32 i; + MV_U8 stat; + + for (i=0; iindex].opcdWRSR; + cmd[1] = sr; + + if ((ret = mvSpiWriteThenRead(cmd, MV_SFLASH_WRSR_CMND_LENGTH, NULL, 0, 0)) != MV_OK) + return ret; + + if ((ret = mvWaitOnWipClear(pFlinfo)) != MV_OK) + return ret; + + mvOsDelay(1); + + return MV_OK; +} + +/******************************************************************************* +* mvSFlashPageWr - Write up to 256 Bytes in the same page +* +* DESCRIPTION: +* Write a buffer up to the page size in length provided that the whole address +* range is within the same page (alligned to page bounderies) +* +*******************************************************************************/ +static MV_STATUS mvSFlashPageWr (MV_SFLASH_INFO * pFlinfo, MV_U32 offset, + MV_U8* pPageBuff, MV_U32 buffSize) +{ + MV_STATUS ret; + MV_U8 cmd[MV_SFLASH_PP_CMND_LENGTH]; + + + /* Protection - check if the model was detected */ + if (pFlinfo->index >= MV_ARRAY_SIZE(sflash)) + { + DB(mvOsPrintf("%s WARNING: Invalid parameter device index!\n", __FUNCTION__);) + return MV_BAD_PARAM; + } + + /* check that we do not cross the page bounderies */ + if (((offset & (sflash[pFlinfo->index].pageSize - 1)) + buffSize) > + sflash[pFlinfo->index].pageSize) + { + DB(mvOsPrintf("%s WARNING: Page allignment problem!\n", __FUNCTION__);) + return MV_OUT_OF_RANGE; + } + + /* Issue the Write enable command prior the page program command */ + if ((ret = mvWriteEnable(pFlinfo)) != MV_OK) + return ret; + + cmd[0] = sflash[pFlinfo->index].opcdPP; + cmd[1] = ((offset >> 16) & 0xFF); + cmd[2] = ((offset >> 8) & 0xFF); + cmd[3] = (offset & 0xFF); + + if ((ret = mvSpiWriteThenWrite(cmd, MV_SFLASH_PP_CMND_LENGTH, pPageBuff, buffSize)) != MV_OK) + return ret; + + if ((ret = mvWaitOnWipClear(pFlinfo)) != MV_OK) + return ret; + + return MV_OK; +} + +/******************************************************************************* +* mvSFlashWithDefaultsIdGet - Try to read the manufacturer and Device IDs from +* the device using the default RDID opcode and the default WREN opcode. +* +* DESCRIPTION: +* This is used to detect a generic device that uses the default opcodes +* for the WREN and RDID. +* +********************************************************************************/ +static MV_STATUS mvSFlashWithDefaultsIdGet (MV_SFLASH_INFO * pFlinfo, MV_U8* manId, MV_U16* devId) +{ + MV_STATUS ret; + MV_U8 cmdRDID[MV_SFLASH_RDID_CMND_LENGTH]; + MV_U8 id[MV_SFLASH_RDID_REPLY_LENGTH]; + + + + /* Use the default RDID opcode to read the IDs */ + cmdRDID[0] = MV_SFLASH_DEFAULT_RDID_OPCD; /* unknown model try default */ + if ((ret = mvSpiWriteThenRead(cmdRDID, MV_SFLASH_RDID_CMND_LENGTH, id, MV_SFLASH_RDID_REPLY_LENGTH, 0)) != MV_OK) + return ret; + + *manId = id[0]; + *devId = 0; + *devId |= (id[1] << 8); + *devId |= id[2]; + + return MV_OK; +} + +/* +##################################################################################### +##################################################################################### +*/ + +/******************************************************************************* +* mvSFlashInit - Initialize the serial flash device +* +* DESCRIPTION: +* Perform the neccessary initialization and configuration +* +* INPUT: +* pFlinfo: pointer to the Flash information structure +* pFlinfo->baseAddr: base address in fast mode. +* pFlinfo->index: Index of the flash in the sflash tabel. If the SPI +* flash device does not support read Id command with +* the standard opcode, then the user should supply this +* as an input to skip the autodetection process!!!! +* +* OUTPUT: +* pFlinfo: pointer to the Flash information structure after detection +* pFlinfo->manufacturerId: Manufacturer ID +* pFlinfo->deviceId: Device ID +* pFlinfo->sectorSize: size of the sector (all sectors are the same). +* pFlinfo->sectorNumber: number of sectors. +* pFlinfo->pageSize: size of the page. +* pFlinfo->index: Index of the detected flash in the sflash tabel +* +* RETURN: +* Success or Error code. +* +* +*******************************************************************************/ +MV_STATUS mvSFlashInit (MV_SFLASH_INFO * pFlinfo) +{ + MV_STATUS ret; + MV_U8 manf; + MV_U16 dev; + MV_U32 indx; + MV_BOOL detectFlag = MV_FALSE; + + /* check for NULL pointer */ + if (pFlinfo == NULL) + { + mvOsPrintf("%s ERROR: Null pointer parameter!\n", __FUNCTION__); + return MV_BAD_PARAM; + } + + /* Initialize the SPI interface with low frequency to make sure that the read ID succeeds */ + if ((ret = mvSpiInit(MV_SFLASH_BASIC_SPI_FREQ)) != MV_OK) + { + mvOsPrintf("%s ERROR: Failed to initialize the SPI interface!\n", __FUNCTION__); + return ret; + } + + /* First try to read the Manufacturer and Device IDs */ + if ((ret = mvSFlashIdGet(pFlinfo, &manf, &dev)) != MV_OK) + { + mvOsPrintf("%s ERROR: Failed to get the SFlash ID!\n", __FUNCTION__); + return ret; + } + + /* loop over the whole table and look for the appropriate SFLASH */ + for (indx=0; indxmanufacturerId = manf; + pFlinfo->deviceId = dev; + pFlinfo->index = indx; + detectFlag = MV_TRUE; + } + } + + if(!detectFlag) + { + mvOsPrintf("%s ERROR: Unknown SPI flash device!\n", __FUNCTION__); + return MV_FAIL; + } + + /* fill the info based on the model detected */ + pFlinfo->sectorSize = sflash[pFlinfo->index].sectorSize; + pFlinfo->sectorNumber = sflash[pFlinfo->index].sectorNumber; + pFlinfo->pageSize = sflash[pFlinfo->index].pageSize; + + /* Set the SPI frequency to the MAX allowed for the device for best performance */ + if ((ret = mvSpiBaudRateSet(sflash[pFlinfo->index].spiMaxFreq)) != MV_OK) + { + mvOsPrintf("%s ERROR: Failed to set the SPI frequency!\n", __FUNCTION__); + return ret; + } + + /* As default lock the SR */ + if ((ret = mvSFlashStatRegLock(pFlinfo, MV_TRUE)) != MV_OK) + return ret; + + return MV_OK; +} + +/******************************************************************************* +* mvSFlashSectorErase - Erasse a single sector of the serial flash +* +* DESCRIPTION: +* Issue the erase sector command and address +* +* INPUT: +* pFlinfo: pointer to the Flash information structure +* secNumber: sector Number to erase (0 -> (sectorNumber-1)) +* +* OUTPUT: +* None +* +* RETURN: +* Success or Error code. +* +* +*******************************************************************************/ +MV_STATUS mvSFlashSectorErase (MV_SFLASH_INFO * pFlinfo, MV_U32 secNumber) +{ + MV_STATUS ret; + MV_U8 cmd[MV_SFLASH_SE_CMND_LENGTH]; + + MV_U32 secAddr = (secNumber * pFlinfo->sectorSize); +#if 0 + MV_U32 i; + MV_U32 * pW = (MV_U32*) (secAddr + pFlinfo->baseAddr); + MV_U32 erasedWord = 0xFFFFFFFF; + MV_U32 wordsPerSector = (pFlinfo->sectorSize / sizeof(MV_U32)); + MV_BOOL eraseNeeded = MV_FALSE; +#endif + /* check for NULL pointer */ + if (pFlinfo == NULL) + { + mvOsPrintf("%s ERROR: Null pointer parameter!\n", __FUNCTION__); + return MV_BAD_PARAM; + } + + /* Protection - check if the model was detected */ + if (pFlinfo->index >= MV_ARRAY_SIZE(sflash)) + { + DB(mvOsPrintf("%s WARNING: Invaild parameter index!\n", __FUNCTION__);) + return MV_BAD_PARAM; + } + + /* check that the sector number is valid */ + if (secNumber >= pFlinfo->sectorNumber) + { + DB(mvOsPrintf("%s WARNING: Invaild parameter sector number!\n", __FUNCTION__);) + return MV_BAD_PARAM; + } + + /* we don't want to access SPI in direct mode from in-direct API, + becasue of timing issue between CS asserts. */ +#if 0 + /* First compare to FF and check if erase is needed */ + for (i=0; iindex].opcdSE; + cmd[1] = ((secAddr >> 16) & 0xFF); + cmd[2] = ((secAddr >> 8) & 0xFF); + cmd[3] = (secAddr & 0xFF); + + /* Issue the Write enable command prior the sector erase command */ + if ((ret = mvWriteEnable(pFlinfo)) != MV_OK) + return ret; + + if ((ret = mvSpiWriteThenWrite(cmd, MV_SFLASH_SE_CMND_LENGTH, NULL, 0)) != MV_OK) + return ret; + + if ((ret = mvWaitOnWipClear(pFlinfo)) != MV_OK) + return ret; + + return MV_OK; +} + +/******************************************************************************* +* mvSFlashChipErase - Erasse the whole serial flash +* +* DESCRIPTION: +* Issue the bulk (chip) erase command +* +* INPUT: +* pFlinfo: pointer to the Flash information structure +* +* OUTPUT: +* None +* +* RETURN: +* Success or Error code. +* +* +*******************************************************************************/ +MV_STATUS mvSFlashChipErase (MV_SFLASH_INFO * pFlinfo) +{ + MV_STATUS ret; + MV_U8 cmd[MV_SFLASH_BE_CMND_LENGTH]; + + + /* check for NULL pointer */ + if (pFlinfo == NULL) + { + mvOsPrintf("%s ERROR: Null pointer parameter!\n", __FUNCTION__); + return MV_BAD_PARAM; + } + + /* Protection - check if the model was detected */ + if (pFlinfo->index >= MV_ARRAY_SIZE(sflash)) + { + DB(mvOsPrintf("%s WARNING: Invaild parameter index!\n", __FUNCTION__);) + return MV_BAD_PARAM; + } + + cmd[0] = sflash[pFlinfo->index].opcdBE; + + /* Issue the Write enable command prior the Bulk erase command */ + if ((ret = mvWriteEnable(pFlinfo)) != MV_OK) + return ret; + + if ((ret = mvSpiWriteThenWrite(cmd, MV_SFLASH_BE_CMND_LENGTH, NULL, 0)) != MV_OK) + return ret; + + if ((ret = mvWaitOnChipEraseDone(pFlinfo)) != MV_OK) + return ret; + + return MV_OK; +} + +/******************************************************************************* +* mvSFlashBlockRd - Read from the serial flash +* +* DESCRIPTION: +* Issue the read command and address then perfom the needed read +* +* INPUT: +* pFlinfo: pointer to the Flash information structure +* offset: byte offset with the flash to start reading from +* pReadBuff: pointer to the buffer to read the data in +* buffSize: size of the buffer to read. +* +* OUTPUT: +* pReadBuff: pointer to the buffer containing the read data +* +* RETURN: +* Success or Error code. +* +* +*******************************************************************************/ +MV_STATUS mvSFlashBlockRd (MV_SFLASH_INFO * pFlinfo, MV_U32 offset, + MV_U8* pReadBuff, MV_U32 buffSize) +{ + MV_U8 cmd[MV_SFLASH_READ_CMND_LENGTH]; + + + /* check for NULL pointer */ + if ((pFlinfo == NULL) || (pReadBuff == NULL)) + { + mvOsPrintf("%s ERROR: Null pointer parameter!\n", __FUNCTION__); + return MV_BAD_PARAM; + } + + /* Protection - check if the model was detected */ + if (pFlinfo->index >= MV_ARRAY_SIZE(sflash)) + { + DB(mvOsPrintf("%s WARNING: Invaild parameter index!\n", __FUNCTION__);) + return MV_BAD_PARAM; + } + + cmd[0] = sflash[pFlinfo->index].opcdREAD; + cmd[1] = ((offset >> 16) & 0xFF); + cmd[2] = ((offset >> 8) & 0xFF); + cmd[3] = (offset & 0xFF); + + return mvSpiWriteThenRead(cmd, MV_SFLASH_READ_CMND_LENGTH, pReadBuff, buffSize, 0); +} + +/******************************************************************************* +* mvSFlashFastBlockRd - Fast read from the serial flash +* +* DESCRIPTION: +* Issue the fast read command and address then perfom the needed read +* +* INPUT: +* pFlinfo: pointer to the Flash information structure +* offset: byte offset with the flash to start reading from +* pReadBuff: pointer to the buffer to read the data in +* buffSize: size of the buffer to read. +* +* OUTPUT: +* pReadBuff: pointer to the buffer containing the read data +* +* RETURN: +* Success or Error code. +* +* +*******************************************************************************/ +MV_STATUS mvSFlashFastBlockRd (MV_SFLASH_INFO * pFlinfo, MV_U32 offset, + MV_U8* pReadBuff, MV_U32 buffSize) +{ + MV_U8 cmd[MV_SFLASH_READ_CMND_LENGTH]; + MV_STATUS ret; + + /* check for NULL pointer */ + if ((pFlinfo == NULL) || (pReadBuff == NULL)) + { + mvOsPrintf("%s ERROR: Null pointer parameter!\n", __FUNCTION__); + return MV_BAD_PARAM; + } + + /* Protection - check if the model was detected */ + if (pFlinfo->index >= MV_ARRAY_SIZE(sflash)) + { + DB(mvOsPrintf("%s WARNING: Invaild parameter index!\n", __FUNCTION__);) + return MV_BAD_PARAM; + } + + /* Set the SPI frequency to the MAX allowed for fast-read operations */ + mvOsPrintf("Setting freq to %d.\n",sflash[pFlinfo->index].spiMaxFastFreq); + if ((ret = mvSpiBaudRateSet(sflash[pFlinfo->index].spiMaxFastFreq)) != MV_OK) + { + mvOsPrintf("%s ERROR: Failed to set the SPI fast frequency!\n", __FUNCTION__); + return ret; + } + + cmd[0] = sflash[pFlinfo->index].opcdFSTRD; + cmd[1] = ((offset >> 16) & 0xFF); + cmd[2] = ((offset >> 8) & 0xFF); + cmd[3] = (offset & 0xFF); + + + ret = mvSpiWriteThenRead(cmd, MV_SFLASH_READ_CMND_LENGTH, pReadBuff, buffSize, + sflash[pFlinfo->index].spiFastRdDummyBytes); + + /* Reset the SPI frequency to the MAX allowed for the device for best performance */ + if ((ret = mvSpiBaudRateSet(sflash[pFlinfo->index].spiMaxFreq)) != MV_OK) + { + mvOsPrintf("%s ERROR: Failed to set the SPI frequency!\n", __FUNCTION__); + return ret; + } + + return ret; +} + + +/******************************************************************************* +* mvSFlashBlockWr - Write a buffer with any size +* +* DESCRIPTION: +* write regardless of the page boundaries and size limit per Page +* program command +* +* INPUT: +* pFlinfo: pointer to the Flash information structure +* offset: byte offset within the flash region +* pWriteBuff: pointer to the buffer holding the data to program +* buffSize: size of the buffer to write +* +* OUTPUT: +* None +* +* RETURN: +* Success or Error code. +* +* +*******************************************************************************/ +MV_STATUS mvSFlashBlockWr (MV_SFLASH_INFO * pFlinfo, MV_U32 offset, + MV_U8* pWriteBuff, MV_U32 buffSize) +{ + MV_STATUS ret; + MV_U32 data2write = buffSize; + MV_U32 preAllOffset = (offset & MV_SFLASH_PAGE_ALLIGN_MASK(MV_M25P_PAGE_SIZE)); + MV_U32 preAllSz = (preAllOffset ? (MV_M25P_PAGE_SIZE - preAllOffset) : 0); + MV_U32 writeOffset = offset; + + /* check for NULL pointer */ +#ifndef CONFIG_MARVELL + if(NULL == pWriteBuff) + { + mvOsPrintf("%s ERROR: Null pointer parameter!\n", __FUNCTION__); + return MV_BAD_PARAM; + } +#endif + + if (pFlinfo == NULL) + { + mvOsPrintf("%s ERROR: Null pointer parameter!\n", __FUNCTION__); + return MV_BAD_PARAM; + } + + /* Protection - check if the model was detected */ + if (pFlinfo->index >= MV_ARRAY_SIZE(sflash)) + { + DB(mvOsPrintf("%s WARNING: Invaild parameter index!\n", __FUNCTION__);) + return MV_BAD_PARAM; + } + + /* check that the buffer size does not exceed the flash size */ + if ((offset + buffSize) > mvSFlashSizeGet(pFlinfo)) + { + DB(mvOsPrintf("%s WARNING: Write exceeds flash size!\n", __FUNCTION__);) + return MV_OUT_OF_RANGE; + } + + /* check if the total block size is less than the first chunk remainder */ + if (data2write < preAllSz) + preAllSz = data2write; + + /* check if programing does not start at a 64byte alligned offset */ + if (preAllSz) + { + if ((ret = mvSFlashPageWr(pFlinfo, writeOffset, pWriteBuff, preAllSz)) != MV_OK) + return ret; + + /* increment pointers and counters */ + writeOffset += preAllSz; + data2write -= preAllSz; + pWriteBuff += preAllSz; + } + + /* program the data that fits in complete page chunks */ + while (data2write >= sflash[pFlinfo->index].pageSize) + { + if ((ret = mvSFlashPageWr(pFlinfo, writeOffset, pWriteBuff, sflash[pFlinfo->index].pageSize)) != MV_OK) + return ret; + + /* increment pointers and counters */ + writeOffset += sflash[pFlinfo->index].pageSize; + data2write -= sflash[pFlinfo->index].pageSize; + pWriteBuff += sflash[pFlinfo->index].pageSize; + } + + /* program the last partial chunk */ + if (data2write) + { + if ((ret = mvSFlashPageWr(pFlinfo, writeOffset, pWriteBuff, data2write)) != MV_OK) + return ret; + } + + return MV_OK; +} + +/******************************************************************************* +* mvSFlashIdGet - Get the manufacturer and device IDs. +* +* DESCRIPTION: +* Get the Manufacturer and device IDs from the serial flash through +* writing the RDID command then reading 3 bytes of data. In case that +* this command was called for the first time in order to detect the +* manufacturer and device IDs, then the default RDID opcode will be used +* unless the device index is indicated by the user (in case the SPI flash +* does not use the default RDID opcode). +* +* INPUT: +* pFlinfo: pointer to the Flash information structure +* pManId: pointer to the 8bit variable to hold the manufacturing ID +* pDevId: pointer to the 16bit variable to hold the device ID +* +* OUTPUT: +* pManId: pointer to the 8bit variable holding the manufacturing ID +* pDevId: pointer to the 16bit variable holding the device ID +* +* RETURN: +* Success or Error code. +* +* +*******************************************************************************/ +MV_STATUS mvSFlashIdGet (MV_SFLASH_INFO * pFlinfo, MV_U8* pManId, MV_U16* pDevId) +{ + MV_STATUS ret; + MV_U8 cmd[MV_SFLASH_RDID_CMND_LENGTH]; + MV_U8 id[MV_SFLASH_RDID_REPLY_LENGTH]; + + + + /* check for NULL pointer */ + if ((pFlinfo == NULL) || (pManId == NULL) || (pDevId == NULL)) + { + mvOsPrintf("%s ERROR: Null pointer parameter!\n", __FUNCTION__); + return MV_BAD_PARAM; + } + + if (pFlinfo->index >= MV_ARRAY_SIZE(sflash)) + return mvSFlashWithDefaultsIdGet(pFlinfo, pManId, pDevId); + else + cmd[0] = sflash[pFlinfo->index].opcdRDID; + + if ((ret = mvSpiWriteThenRead(cmd, MV_SFLASH_RDID_CMND_LENGTH, id, MV_SFLASH_RDID_REPLY_LENGTH, 0)) != MV_OK) + return ret; + + *pManId = id[0]; + *pDevId = 0; + *pDevId |= (id[1] << 8); + *pDevId |= id[2]; + + return MV_OK; +} + +/******************************************************************************* +* mvSFlashWpRegionSet - Set the Write-Protected region +* +* DESCRIPTION: +* Set the Write-Protected region +* +* INPUT: +* pFlinfo: pointer to the Flash information structure +* wpRegion: which region will be protected +* +* OUTPUT: +* None +* +* RETURN: +* Success or Error code. +* +* +*******************************************************************************/ +MV_STATUS mvSFlashWpRegionSet (MV_SFLASH_INFO * pFlinfo, MV_SFLASH_WP_REGION wpRegion) +{ + MV_U8 wpMask; + + /* check for NULL pointer */ + if (pFlinfo == NULL) + { + mvOsPrintf("%s ERROR: Null pointer parameter!\n", __FUNCTION__); + return MV_BAD_PARAM; + } + + /* Protection - check if the model was detected */ + if (pFlinfo->index >= MV_ARRAY_SIZE(sflash)) + { + DB(mvOsPrintf("%s WARNING: Invaild parameter index!\n", __FUNCTION__);) + return MV_BAD_PARAM; + } + + /* Check if the chip is an ST flash; then WP supports only 3 bits */ + if (pFlinfo->manufacturerId == MV_M25PXXX_ST_MANF_ID) + { + switch (wpRegion) + { + case MV_WP_NONE: + wpMask = MV_M25P_STATUS_BP_NONE; + break; + + case MV_WP_UPR_1OF128: + DB(mvOsPrintf("%s WARNING: Invaild option for this flash chip!\n", __FUNCTION__);) + return MV_NOT_SUPPORTED; + + case MV_WP_UPR_1OF64: + wpMask = MV_M25P_STATUS_BP_1_OF_64; + break; + + case MV_WP_UPR_1OF32: + wpMask = MV_M25P_STATUS_BP_1_OF_32; + break; + + case MV_WP_UPR_1OF16: + wpMask = MV_M25P_STATUS_BP_1_OF_16; + break; + + case MV_WP_UPR_1OF8: + wpMask = MV_M25P_STATUS_BP_1_OF_8; + break; + + case MV_WP_UPR_1OF4: + wpMask = MV_M25P_STATUS_BP_1_OF_4; + break; + + case MV_WP_UPR_1OF2: + wpMask = MV_M25P_STATUS_BP_1_OF_2; + break; + + case MV_WP_ALL: + wpMask = MV_M25P_STATUS_BP_ALL; + break; + + default: + DB(mvOsPrintf("%s WARNING: Invaild parameter WP region!\n", __FUNCTION__);) + return MV_BAD_PARAM; + } + } + /* check if the manufacturer is MXIC then the WP is 4bits */ + else if (pFlinfo->manufacturerId == MV_MXIC_MANF_ID) + { + switch (wpRegion) + { + case MV_WP_NONE: + wpMask = MV_MX25L_STATUS_BP_NONE; + break; + + case MV_WP_UPR_1OF128: + wpMask = MV_MX25L_STATUS_BP_1_OF_128; + break; + + case MV_WP_UPR_1OF64: + wpMask = MV_MX25L_STATUS_BP_1_OF_64; + break; + + case MV_WP_UPR_1OF32: + wpMask = MV_MX25L_STATUS_BP_1_OF_32; + break; + + case MV_WP_UPR_1OF16: + wpMask = MV_MX25L_STATUS_BP_1_OF_16; + break; + + case MV_WP_UPR_1OF8: + wpMask = MV_MX25L_STATUS_BP_1_OF_8; + break; + + case MV_WP_UPR_1OF4: + wpMask = MV_MX25L_STATUS_BP_1_OF_4; + break; + + case MV_WP_UPR_1OF2: + wpMask = MV_MX25L_STATUS_BP_1_OF_2; + break; + + case MV_WP_ALL: + wpMask = MV_MX25L_STATUS_BP_ALL; + break; + + default: + DB(mvOsPrintf("%s WARNING: Invaild parameter WP region!\n", __FUNCTION__);) + return MV_BAD_PARAM; + } + } + /* check if the manufacturer is SPANSION then the WP is 4bits */ + else if (pFlinfo->manufacturerId == MV_SPANSION_MANF_ID) + { + switch (wpRegion) + { + case MV_WP_NONE: + wpMask = MV_S25FL_STATUS_BP_NONE; + break; + + case MV_WP_UPR_1OF128: + DB(mvOsPrintf("%s WARNING: Invaild option for this flash chip!\n", __FUNCTION__);) + return MV_NOT_SUPPORTED; + + case MV_WP_UPR_1OF64: + wpMask = MV_S25FL_STATUS_BP_1_OF_64; + break; + + case MV_WP_UPR_1OF32: + wpMask = MV_S25FL_STATUS_BP_1_OF_32; + break; + + case MV_WP_UPR_1OF16: + wpMask = MV_S25FL_STATUS_BP_1_OF_16; + break; + + case MV_WP_UPR_1OF8: + wpMask = MV_S25FL_STATUS_BP_1_OF_8; + break; + + case MV_WP_UPR_1OF4: + wpMask = MV_S25FL_STATUS_BP_1_OF_4; + break; + + case MV_WP_UPR_1OF2: + wpMask = MV_S25FL_STATUS_BP_1_OF_2; + break; + + case MV_WP_ALL: + wpMask = MV_S25FL_STATUS_BP_ALL; + break; + + + default: + DB(mvOsPrintf("%s WARNING: Invaild parameter WP region!\n", __FUNCTION__);) + return MV_BAD_PARAM; + } + } + else + { + DB(mvOsPrintf("%s WARNING: Invaild parameter Manufacturer ID!\n", __FUNCTION__);) + return MV_BAD_PARAM; + } + + /* Verify that the SRWD bit is always set - register is s/w locked */ + wpMask |= MV_SFLASH_STATUS_REG_SRWD_MASK; + + return mvStatusRegSet(pFlinfo, wpMask); +} + +/******************************************************************************* +* mvSFlashWpRegionGet - Get the Write-Protected region configured +* +* DESCRIPTION: +* Get from the chip the Write-Protected region configured +* +* INPUT: +* pFlinfo: pointer to the Flash information structure +* pWpRegion: pointer to the variable to return the WP region in +* +* OUTPUT: +* wpRegion: pointer to the variable holding the WP region configured +* +* RETURN: +* Success or Error code. +* +* +*******************************************************************************/ +MV_STATUS mvSFlashWpRegionGet (MV_SFLASH_INFO * pFlinfo, MV_SFLASH_WP_REGION * pWpRegion) +{ + MV_STATUS ret; + MV_U8 reg; + + /* check for NULL pointer */ + if ((pFlinfo == NULL) || (pWpRegion == NULL)) + { + mvOsPrintf("%s ERROR: Null pointer parameter!\n", __FUNCTION__); + return MV_BAD_PARAM; + } + + /* Protection - check if the model was detected */ + if (pFlinfo->index >= MV_ARRAY_SIZE(sflash)) + { + DB(mvOsPrintf("%s WARNING: Invaild parameter index!\n", __FUNCTION__);) + return MV_BAD_PARAM; + } + + if ((ret = mvStatusRegGet(pFlinfo, ®)) != MV_OK) + return ret; + + /* Check if the chip is an ST flash; then WP supports only 3 bits */ + if (pFlinfo->manufacturerId == MV_M25PXXX_ST_MANF_ID) + { + switch ((reg & MV_M25P_STATUS_REG_WP_MASK)) + { + case MV_M25P_STATUS_BP_NONE: + *pWpRegion = MV_WP_NONE; + break; + + case MV_M25P_STATUS_BP_1_OF_64: + *pWpRegion = MV_WP_UPR_1OF64; + break; + + case MV_M25P_STATUS_BP_1_OF_32: + *pWpRegion = MV_WP_UPR_1OF32; + break; + + case MV_M25P_STATUS_BP_1_OF_16: + *pWpRegion = MV_WP_UPR_1OF16; + break; + + case MV_M25P_STATUS_BP_1_OF_8: + *pWpRegion = MV_WP_UPR_1OF8; + break; + + case MV_M25P_STATUS_BP_1_OF_4: + *pWpRegion = MV_WP_UPR_1OF4; + break; + + case MV_M25P_STATUS_BP_1_OF_2: + *pWpRegion = MV_WP_UPR_1OF2; + break; + + case MV_M25P_STATUS_BP_ALL: + *pWpRegion = MV_WP_ALL; + break; + + default: + DB(mvOsPrintf("%s WARNING: Unidentified WP region in h/w!\n", __FUNCTION__);) + return MV_BAD_VALUE; + } + } + /* check if the manufacturer is MXIC then the WP is 4bits */ + else if (pFlinfo->manufacturerId == MV_MXIC_MANF_ID) + { + switch ((reg & MV_MX25L_STATUS_REG_WP_MASK)) + { + case MV_MX25L_STATUS_BP_NONE: + *pWpRegion = MV_WP_NONE; + break; + + case MV_MX25L_STATUS_BP_1_OF_128: + *pWpRegion = MV_WP_UPR_1OF128; + break; + + case MV_MX25L_STATUS_BP_1_OF_64: + *pWpRegion = MV_WP_UPR_1OF64; + break; + + case MV_MX25L_STATUS_BP_1_OF_32: + *pWpRegion = MV_WP_UPR_1OF32; + break; + + case MV_MX25L_STATUS_BP_1_OF_16: + *pWpRegion = MV_WP_UPR_1OF16; + break; + + case MV_MX25L_STATUS_BP_1_OF_8: + *pWpRegion = MV_WP_UPR_1OF8; + break; + + case MV_MX25L_STATUS_BP_1_OF_4: + *pWpRegion = MV_WP_UPR_1OF4; + break; + + case MV_MX25L_STATUS_BP_1_OF_2: + *pWpRegion = MV_WP_UPR_1OF2; + break; + + case MV_MX25L_STATUS_BP_ALL: + *pWpRegion = MV_WP_ALL; + break; + + default: + DB(mvOsPrintf("%s WARNING: Unidentified WP region in h/w!\n", __FUNCTION__);) + return MV_BAD_VALUE; + } + } + /* Check if the chip is an SPANSION flash; then WP supports only 3 bits */ + else if (pFlinfo->manufacturerId == MV_SPANSION_MANF_ID) + { + switch ((reg & MV_S25FL_STATUS_REG_WP_MASK)) + { + case MV_S25FL_STATUS_BP_NONE: + *pWpRegion = MV_WP_NONE; + break; + + case MV_S25FL_STATUS_BP_1_OF_64: + *pWpRegion = MV_WP_UPR_1OF64; + break; + + case MV_S25FL_STATUS_BP_1_OF_32: + *pWpRegion = MV_WP_UPR_1OF32; + break; + + case MV_S25FL_STATUS_BP_1_OF_16: + *pWpRegion = MV_WP_UPR_1OF16; + break; + + case MV_S25FL_STATUS_BP_1_OF_8: + *pWpRegion = MV_WP_UPR_1OF8; + break; + + case MV_S25FL_STATUS_BP_1_OF_4: + *pWpRegion = MV_WP_UPR_1OF4; + break; + + case MV_S25FL_STATUS_BP_1_OF_2: + *pWpRegion = MV_WP_UPR_1OF2; + break; + + case MV_S25FL_STATUS_BP_ALL: + *pWpRegion = MV_WP_ALL; + break; + + default: + DB(mvOsPrintf("%s WARNING: Unidentified WP region in h/w!\n", __FUNCTION__);) + return MV_BAD_VALUE; + } + } + else + { + DB(mvOsPrintf("%s WARNING: Invaild parameter Manufacturer ID!\n", __FUNCTION__);) + return MV_BAD_PARAM; + } + + return MV_OK; +} + +/******************************************************************************* +* mvSFlashStatRegLock - Lock the status register for writing - W/Vpp +* pin should be low to take effect +* +* DESCRIPTION: +* Lock the access to the Status Register for writing. This will +* cause the flash to enter the hardware protection mode if the W/Vpp +* is low. If the W/Vpp is hi, the chip will be in soft protection mode, but +* the register will continue to be writable if WREN sequence was used. +* +* INPUT: +* pFlinfo: pointer to the Flash information structure +* srLock: enable/disable (MV_TRUE/MV_FALSE) status registor lock mechanism +* +* OUTPUT: +* None +* +* RETURN: +* Success or Error code. +* +* +*******************************************************************************/ +MV_STATUS mvSFlashStatRegLock (MV_SFLASH_INFO * pFlinfo, MV_BOOL srLock) +{ + MV_STATUS ret; + MV_U8 reg; + + /* check for NULL pointer */ + if (pFlinfo == NULL) + { + mvOsPrintf("%s ERROR: Null pointer parameter!\n", __FUNCTION__); + return MV_BAD_PARAM; + } + + /* Protection - check if the model was detected */ + if (pFlinfo->index >= MV_ARRAY_SIZE(sflash)) + { + DB(mvOsPrintf("%s WARNING: Invaild parameter index!\n", __FUNCTION__);) + return MV_BAD_PARAM; + } + + if ((ret = mvStatusRegGet(pFlinfo, ®)) != MV_OK) + return ret; + + if (srLock) + reg |= MV_SFLASH_STATUS_REG_SRWD_MASK; + else + reg &= ~MV_SFLASH_STATUS_REG_SRWD_MASK; + + return mvStatusRegSet(pFlinfo, reg); +} + +/******************************************************************************* +* mvSFlashSizeGet - Get the size of the SPI flash +* +* DESCRIPTION: +* based on the sector number and size of each sector calculate the total +* size of the flash memory. +* +* INPUT: +* pFlinfo: pointer to the Flash information structure +* +* OUTPUT: +* None. +* +* RETURN: +* Size of the flash in bytes. +* +* +*******************************************************************************/ +MV_U32 mvSFlashSizeGet (MV_SFLASH_INFO * pFlinfo) +{ + /* check for NULL pointer */ + if (pFlinfo == NULL) + { + mvOsPrintf("%s ERROR: Null pointer parameter!\n", __FUNCTION__); + return 0; + } + + return (pFlinfo->sectorSize * pFlinfo->sectorNumber); +} + +/******************************************************************************* +* mvSFlashPowerSaveEnter - Cause the falsh device to go into power save mode +* +* DESCRIPTION: +* Enter a special power save mode. +* +* INPUT: +* pFlinfo: pointer to the Flash information structure +* +* OUTPUT: +* None. +* +* RETURN: +* Size of the flash in bytes. +* +* +*******************************************************************************/ +MV_STATUS mvSFlashPowerSaveEnter(MV_SFLASH_INFO * pFlinfo) +{ + MV_STATUS ret; + MV_U8 cmd[MV_SFLASH_DP_CMND_LENGTH]; + + + /* check for NULL pointer */ + if (pFlinfo == NULL) + { + mvOsPrintf("%s ERROR: Null pointer parameter!\n", __FUNCTION__); + return 0; + } + + /* Protection - check if the model was detected */ + if (pFlinfo->index >= MV_ARRAY_SIZE(sflash)) + { + DB(mvOsPrintf("%s WARNING: Invaild parameter index!\n", __FUNCTION__);) + return MV_BAD_PARAM; + } + + /* check that power save mode is supported in the specific device */ + if (sflash[pFlinfo->index].opcdPwrSave == MV_SFLASH_NO_SPECIFIC_OPCD) + { + DB(mvOsPrintf("%s WARNING: Power save not supported for this device!\n", __FUNCTION__);) + return MV_NOT_SUPPORTED; + } + + cmd[0] = sflash[pFlinfo->index].opcdPwrSave; + + if ((ret = mvSpiWriteThenWrite(cmd, MV_SFLASH_DP_CMND_LENGTH, NULL, 0)) != MV_OK) + return ret; + + return MV_OK; + +} + +/******************************************************************************* +* mvSFlashPowerSaveExit - Cause the falsh device to exit the power save mode +* +* DESCRIPTION: +* Exit the deep power save mode. +* +* INPUT: +* pFlinfo: pointer to the Flash information structure +* +* OUTPUT: +* None. +* +* RETURN: +* Size of the flash in bytes. +* +* +*******************************************************************************/ +MV_STATUS mvSFlashPowerSaveExit (MV_SFLASH_INFO * pFlinfo) +{ + MV_STATUS ret; + MV_U8 cmd[MV_SFLASH_RES_CMND_LENGTH]; + + + /* check for NULL pointer */ + if (pFlinfo == NULL) + { + mvOsPrintf("%s ERROR: Null pointer parameter!\n", __FUNCTION__); + return 0; + } + + /* Protection - check if the model was detected */ + if (pFlinfo->index >= MV_ARRAY_SIZE(sflash)) + { + DB(mvOsPrintf("%s WARNING: Invaild parameter index!\n", __FUNCTION__);) + return MV_BAD_PARAM; + } + + /* check that power save mode is supported in the specific device */ + if (sflash[pFlinfo->index].opcdRES == MV_SFLASH_NO_SPECIFIC_OPCD) + { + DB(mvOsPrintf("%s WARNING: Read Electronic Signature not supported for this device!\n", __FUNCTION__);) + return MV_NOT_SUPPORTED; + } + + cmd[0] = sflash[pFlinfo->index].opcdRES; + + if ((ret = mvSpiWriteThenWrite(cmd, MV_SFLASH_RES_CMND_LENGTH, NULL, 0)) != MV_OK) + return ret; + + /* add the delay needed for the device to wake up */ + mvOsDelay(MV_MXIC_DP_EXIT_DELAY); /* 30 ms */ + + return MV_OK; + +} + +/******************************************************************************* +* mvSFlashModelGet - Retreive the string with the device manufacturer and model +* +* DESCRIPTION: +* Retreive the string with the device manufacturer and model +* +* INPUT: +* pFlinfo: pointer to the Flash information structure +* +* OUTPUT: +* None. +* +* RETURN: +* pointer to the string indicating the device manufacturer and model +* +* +*******************************************************************************/ +const MV_8 * mvSFlashModelGet (MV_SFLASH_INFO * pFlinfo) +{ + static const MV_8 * unknModel = (const MV_8 *)"Unknown"; + + /* check for NULL pointer */ + if (pFlinfo == NULL) + { + mvOsPrintf("%s ERROR: Null pointer parameter!\n", __FUNCTION__); + return 0; + } + + /* Protection - check if the model was detected */ + if (pFlinfo->index >= MV_ARRAY_SIZE(sflash)) + { + DB(mvOsPrintf("%s WARNING: Invaild parameter index!\n", __FUNCTION__);) + return unknModel; + } + + return sflash[pFlinfo->index].deviceModel; +} + diff --git a/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/mv_hal/sflash/mvSFlash.h b/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/mv_hal/sflash/mvSFlash.h new file mode 100644 index 0000000000..f441a5cf52 --- /dev/null +++ b/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/mv_hal/sflash/mvSFlash.h @@ -0,0 +1,166 @@ +/******************************************************************************* +Copyright (C) Marvell International Ltd. and its affiliates + +This software file (the "File") is owned and distributed by Marvell +International Ltd. and/or its affiliates ("Marvell") under the following +alternative licensing terms. Once you have made an election to distribute the +File under one of the following license alternatives, please (i) delete this +introductory statement regarding license alternatives, (ii) delete the two +license alternatives that you have not elected to use and (iii) preserve the +Marvell copyright notice above. + +******************************************************************************** +Marvell Commercial License Option + +If you received this File from Marvell and you have entered into a commercial +license agreement (a "Commercial License") with Marvell, the File is licensed +to you under the terms of the applicable Commercial License. + +******************************************************************************** +Marvell GPL License Option + +If you received this File from Marvell, you may opt to use, redistribute and/or +modify this File in accordance with the terms and conditions of the General +Public License Version 2, June 1991 (the "GPL License"), a copy of which is +available along with the File in the license.txt file or by writing to the Free +Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or +on the worldwide web at http://www.gnu.org/licenses/gpl.txt. + +THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED +WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY +DISCLAIMED. The GPL License provides additional details about this warranty +disclaimer. +******************************************************************************** +Marvell BSD License Option + +If you received this File from Marvell, you may opt to use, redistribute and/or +modify this File under the following licensing terms. +Redistribution and use in source and binary forms, with or without modification, +are permitted provided that the following conditions are met: + + * Redistributions of source code must retain the above copyright notice, + this list of conditions and the following disclaimer. + + * Redistributions in binary form must reproduce the above copyright + notice, this list of conditions and the following disclaimer in the + documentation and/or other materials provided with the distribution. + + * Neither the name of Marvell nor the names of its contributors may be + used to endorse or promote products derived from this software without + specific prior written permission. + +THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND +ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED +WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE +DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR +ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES +(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; +LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON +ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS +SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + +*******************************************************************************/ + +#ifndef __INCmvSFlashH +#define __INCmvSFlashH + +#include "mvTypes.h" + +/* MCAROS */ +#define MV_SFLASH_PAGE_ALLIGN_MASK(pgSz) (pgSz-1) +#define MV_ARRAY_SIZE(a) ((sizeof(a)) / (sizeof(a[0]))) + +/* Constants */ +#define MV_INVALID_DEVICE_NUMBER 0xFFFFFFFF +/* 10 MHz is the minimum possible SPI frequency when tclk is set 200MHz*/ +#define MV_SFLASH_BASIC_SPI_FREQ 10000000 +/* enumerations */ +typedef enum +{ + MV_WP_NONE, /* Unprotect the whole chip */ + MV_WP_UPR_1OF128, /* Write protect the upper 1/128 part */ + MV_WP_UPR_1OF64, /* Write protect the upper 1/64 part */ + MV_WP_UPR_1OF32, /* Write protect the upper 1/32 part */ + MV_WP_UPR_1OF16, /* Write protect the upper 1/16 part */ + MV_WP_UPR_1OF8, /* Write protect the upper 1/8 part */ + MV_WP_UPR_1OF4, /* Write protect the upper 1/4 part */ + MV_WP_UPR_1OF2, /* Write protect the upper 1/2 part */ + MV_WP_ALL /* Write protect the whole chip */ +} MV_SFLASH_WP_REGION; + +/* Type Definitions */ +typedef struct +{ + MV_U8 opcdWREN; /* Write enable opcode */ + MV_U8 opcdWRDI; /* Write disable opcode */ + MV_U8 opcdRDID; /* Read ID opcode */ + MV_U8 opcdRDSR; /* Read Status Register opcode */ + MV_U8 opcdWRSR; /* Write Status register opcode */ + MV_U8 opcdREAD; /* Read opcode */ + MV_U8 opcdFSTRD; /* Fast Read opcode */ + MV_U8 opcdPP; /* Page program opcode */ + MV_U8 opcdSE; /* Sector erase opcode */ + MV_U8 opcdBE; /* Bulk erase opcode */ + MV_U8 opcdRES; /* Read electronic signature */ + MV_U8 opcdPwrSave; /* Go into power save mode */ + MV_U32 sectorSize; /* Size of each sector */ + MV_U32 sectorNumber; /* Number of sectors */ + MV_U32 pageSize; /* size of each page */ + const char * deviceModel; /* string with the device model */ + MV_U32 manufacturerId; /* The manufacturer ID */ + MV_U32 deviceId; /* Device ID */ + MV_U32 spiMaxFreq; /* The MAX frequency that can be used with the device */ + MV_U32 spiMaxFastFreq; /* The MAX frequency that can be used with the device for fast reads */ + MV_U32 spiFastRdDummyBytes; /* Number of dumy bytes to read before real data when working in fast read mode. */ +} MV_SFLASH_DEVICE_PARAMS; + +typedef struct +{ + MV_U32 baseAddr; /* Flash Base Address used in fast mode */ + MV_U8 manufacturerId; /* Manufacturer ID */ + MV_U16 deviceId; /* Device ID */ + MV_U32 sectorSize; /* Size of each sector - all the same */ + MV_U32 sectorNumber; /* Number of sectors */ + MV_U32 pageSize; /* Page size - affect allignment */ + MV_U32 index; /* index of the device in the sflash table (internal parameter) */ +} MV_SFLASH_INFO; + +/* Function Prototypes */ +/* Init */ +MV_STATUS mvSFlashInit (MV_SFLASH_INFO * pFlinfo); + +/* erase */ +MV_STATUS mvSFlashSectorErase (MV_SFLASH_INFO * pFlinfo, MV_U32 secNumber); +MV_STATUS mvSFlashChipErase (MV_SFLASH_INFO * pFlinfo); + +/* Read */ +MV_STATUS mvSFlashBlockRd (MV_SFLASH_INFO * pFlinfo, MV_U32 offset, + MV_U8* pReadBuff, MV_U32 buffSize); +MV_STATUS mvSFlashFastBlockRd (MV_SFLASH_INFO * pFlinfo, MV_U32 offset, + MV_U8* pReadBuff, MV_U32 buffSize); + +/* write regardless of the page boundaries and size limit per Page program command */ +MV_STATUS mvSFlashBlockWr (MV_SFLASH_INFO * pFlinfo, MV_U32 offset, + MV_U8* pWriteBuff, MV_U32 buffSize); +/* Get IDs */ +MV_STATUS mvSFlashIdGet (MV_SFLASH_INFO * pFlinfo, MV_U8* pManId, MV_U16* pDevId); + +/* Set and Get the Write Protection region - if the Status register is not locked */ +MV_STATUS mvSFlashWpRegionSet (MV_SFLASH_INFO * pFlinfo, MV_SFLASH_WP_REGION wpRegion); +MV_STATUS mvSFlashWpRegionGet (MV_SFLASH_INFO * pFlinfo, MV_SFLASH_WP_REGION * pWpRegion); + +/* Lock the status register for writing - W/Vpp pin should be low to take effect */ +MV_STATUS mvSFlashStatRegLock (MV_SFLASH_INFO * pFlinfo, MV_BOOL srLock); + +/* Get the regions sizes */ +MV_U32 mvSFlashSizeGet (MV_SFLASH_INFO * pFlinfo); + +/* Cause the falsh device to go into power save mode */ +MV_STATUS mvSFlashPowerSaveEnter(MV_SFLASH_INFO * pFlinfo); +MV_STATUS mvSFlashPowerSaveExit (MV_SFLASH_INFO * pFlinfo); + +/* Retreive the string with the device manufacturer and model */ +const MV_8 * mvSFlashModelGet (MV_SFLASH_INFO * pFlinfo); + +#endif /* __INCmvSFlashH */ diff --git a/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/mv_hal/sflash/mvSFlashSpec.h b/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/mv_hal/sflash/mvSFlashSpec.h new file mode 100644 index 0000000000..eeb44262e2 --- /dev/null +++ b/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/mv_hal/sflash/mvSFlashSpec.h @@ -0,0 +1,233 @@ +/******************************************************************************* +Copyright (C) Marvell International Ltd. and its affiliates + +This software file (the "File") is owned and distributed by Marvell +International Ltd. and/or its affiliates ("Marvell") under the following +alternative licensing terms. Once you have made an election to distribute the +File under one of the following license alternatives, please (i) delete this +introductory statement regarding license alternatives, (ii) delete the two +license alternatives that you have not elected to use and (iii) preserve the +Marvell copyright notice above. + +******************************************************************************** +Marvell Commercial License Option + +If you received this File from Marvell and you have entered into a commercial +license agreement (a "Commercial License") with Marvell, the File is licensed +to you under the terms of the applicable Commercial License. + +******************************************************************************** +Marvell GPL License Option + +If you received this File from Marvell, you may opt to use, redistribute and/or +modify this File in accordance with the terms and conditions of the General +Public License Version 2, June 1991 (the "GPL License"), a copy of which is +available along with the File in the license.txt file or by writing to the Free +Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or +on the worldwide web at http://www.gnu.org/licenses/gpl.txt. + +THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED +WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY +DISCLAIMED. The GPL License provides additional details about this warranty +disclaimer. +******************************************************************************** +Marvell BSD License Option + +If you received this File from Marvell, you may opt to use, redistribute and/or +modify this File under the following licensing terms. +Redistribution and use in source and binary forms, with or without modification, +are permitted provided that the following conditions are met: + + * Redistributions of source code must retain the above copyright notice, + this list of conditions and the following disclaimer. + + * Redistributions in binary form must reproduce the above copyright + notice, this list of conditions and the following disclaimer in the + documentation and/or other materials provided with the distribution. + + * Neither the name of Marvell nor the names of its contributors may be + used to endorse or promote products derived from this software without + specific prior written permission. + +THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND +ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED +WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE +DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR +ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES +(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; +LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON +ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS +SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + +*******************************************************************************/ + +#ifndef __INCmvSFlashSpecH +#define __INCmvSFlashSpecH + +/* Constants */ +#define MV_SFLASH_READ_CMND_LENGTH 4 /* 1B opcode + 3B address */ +#define MV_SFLASH_SE_CMND_LENGTH 4 /* 1B opcode + 3B address */ +#define MV_SFLASH_BE_CMND_LENGTH 1 /* 1B opcode */ +#define MV_SFLASH_PP_CMND_LENGTH 4 /* 1B opcode + 3B address */ +#define MV_SFLASH_WREN_CMND_LENGTH 1 /* 1B opcode */ +#define MV_SFLASH_WRDI_CMND_LENGTH 1 /* 1B opcode */ +#define MV_SFLASH_RDID_CMND_LENGTH 1 /* 1B opcode */ +#define MV_SFLASH_RDID_REPLY_LENGTH 3 /* 1B manf ID and 2B device ID */ +#define MV_SFLASH_RDSR_CMND_LENGTH 1 /* 1B opcode */ +#define MV_SFLASH_RDSR_REPLY_LENGTH 1 /* 1B status */ +#define MV_SFLASH_WRSR_CMND_LENGTH 2 /* 1B opcode + 1B status value */ +#define MV_SFLASH_DP_CMND_LENGTH 1 /* 1B opcode */ +#define MV_SFLASH_RES_CMND_LENGTH 1 /* 1B opcode */ + +/* Status Register Bit Masks */ +#define MV_SFLASH_STATUS_REG_WIP_OFFSET 0 /* bit 0; write in progress */ +#define MV_SFLASH_STATUS_REG_WP_OFFSET 2 /* bit 2-4; write protect option */ +#define MV_SFLASH_STATUS_REG_SRWD_OFFSET 7 /* bit 7; lock status register write */ +#define MV_SFLASH_STATUS_REG_WIP_MASK (0x1 << MV_SFLASH_STATUS_REG_WIP_OFFSET) +#define MV_SFLASH_STATUS_REG_SRWD_MASK (0x1 << MV_SFLASH_STATUS_REG_SRWD_OFFSET) + +#define MV_SFLASH_MAX_WAIT_LOOP 1000000 +#define MV_SFLASH_CHIP_ERASE_MAX_WAIT_LOOP 0x50000000 + +#define MV_SFLASH_DEFAULT_RDID_OPCD 0x9F /* Default Read ID */ +#define MV_SFLASH_DEFAULT_WREN_OPCD 0x06 /* Default Write Enable */ +#define MV_SFLASH_NO_SPECIFIC_OPCD 0x00 + +/********************************/ +/* ST M25Pxxx Device Specific */ +/********************************/ + +/* Manufacturer IDs and Device IDs for SFLASHs supported by the driver */ +#define MV_M25PXXX_ST_MANF_ID 0x20 +#define MV_M25P32_DEVICE_ID 0x2016 +#define MV_M25P32_MAX_SPI_FREQ 20000000 /* 20MHz */ +#define MV_M25P32_MAX_FAST_SPI_FREQ 50000000 /* 50MHz */ +#define MV_M25P32_FAST_READ_DUMMY_BYTES 1 +#define MV_M25P64_DEVICE_ID 0x2017 +#define MV_M25P64_MAX_SPI_FREQ 20000000 /* 20MHz */ +#define MV_M25P64_MAX_FAST_SPI_FREQ 50000000 /* 50MHz */ +#define MV_M25P64_FAST_READ_DUMMY_BYTES 1 +#define MV_M25P128_DEVICE_ID 0x2018 +#define MV_M25P128_MAX_SPI_FREQ 20000000 /* 20MHz */ +#define MV_M25P128_MAX_FAST_SPI_FREQ 50000000 /* 50MHz */ +#define MV_M25P128_FAST_READ_DUMMY_BYTES 1 + + +/* Sector Sizes and population per device model*/ +#define MV_M25P32_SECTOR_SIZE 0x10000 /* 64K */ +#define MV_M25P64_SECTOR_SIZE 0x10000 /* 64K */ +#define MV_M25P128_SECTOR_SIZE 0x40000 /* 256K */ +#define MV_M25P32_SECTOR_NUMBER 64 +#define MV_M25P64_SECTOR_NUMBER 128 +#define MV_M25P128_SECTOR_NUMBER 64 +#define MV_M25P_PAGE_SIZE 0x100 /* 256 byte */ + +#define MV_M25P_WREN_CMND_OPCD 0x06 /* Write Enable */ +#define MV_M25P_WRDI_CMND_OPCD 0x04 /* Write Disable */ +#define MV_M25P_RDID_CMND_OPCD 0x9F /* Read ID */ +#define MV_M25P_RDSR_CMND_OPCD 0x05 /* Read Status Register */ +#define MV_M25P_WRSR_CMND_OPCD 0x01 /* Write Status Register */ +#define MV_M25P_READ_CMND_OPCD 0x03 /* Sequential Read */ +#define MV_M25P_FAST_RD_CMND_OPCD 0x0B /* Fast Read */ +#define MV_M25P_PP_CMND_OPCD 0x02 /* Page Program */ +#define MV_M25P_SE_CMND_OPCD 0xD8 /* Sector Erase */ +#define MV_M25P_BE_CMND_OPCD 0xC7 /* Bulk Erase */ +#define MV_M25P_RES_CMND_OPCD 0xAB /* Read Electronic Signature */ + +/* Status Register Write Protect Bit Masks - 3bits */ +#define MV_M25P_STATUS_REG_WP_MASK (0x07 << MV_SFLASH_STATUS_REG_WP_OFFSET) +#define MV_M25P_STATUS_BP_NONE (0x00 << MV_SFLASH_STATUS_REG_WP_OFFSET) +#define MV_M25P_STATUS_BP_1_OF_64 (0x01 << MV_SFLASH_STATUS_REG_WP_OFFSET) +#define MV_M25P_STATUS_BP_1_OF_32 (0x02 << MV_SFLASH_STATUS_REG_WP_OFFSET) +#define MV_M25P_STATUS_BP_1_OF_16 (0x03 << MV_SFLASH_STATUS_REG_WP_OFFSET) +#define MV_M25P_STATUS_BP_1_OF_8 (0x04 << MV_SFLASH_STATUS_REG_WP_OFFSET) +#define MV_M25P_STATUS_BP_1_OF_4 (0x05 << MV_SFLASH_STATUS_REG_WP_OFFSET) +#define MV_M25P_STATUS_BP_1_OF_2 (0x06 << MV_SFLASH_STATUS_REG_WP_OFFSET) +#define MV_M25P_STATUS_BP_ALL (0x07 << MV_SFLASH_STATUS_REG_WP_OFFSET) + +/************************************/ +/* MXIC MX25L6405 Device Specific */ +/************************************/ + +/* Manufacturer IDs and Device IDs for SFLASHs supported by the driver */ +#define MV_MXIC_MANF_ID 0xC2 +#define MV_MX25L6405_DEVICE_ID 0x2017 +#define MV_MX25L6405_MAX_SPI_FREQ 20000000 /* 20MHz */ +#define MV_MX25L6405_MAX_FAST_SPI_FREQ 50000000 /* 50MHz */ +#define MV_MX25L6405_FAST_READ_DUMMY_BYTES 1 +#define MV_MXIC_DP_EXIT_DELAY 30 /* 30 ms */ + +/* Sector Sizes and population per device model*/ +#define MV_MX25L6405_SECTOR_SIZE 0x10000 /* 64K */ +#define MV_MX25L6405_SECTOR_NUMBER 128 +#define MV_MXIC_PAGE_SIZE 0x100 /* 256 byte */ + +#define MV_MX25L_WREN_CMND_OPCD 0x06 /* Write Enable */ +#define MV_MX25L_WRDI_CMND_OPCD 0x04 /* Write Disable */ +#define MV_MX25L_RDID_CMND_OPCD 0x9F /* Read ID */ +#define MV_MX25L_RDSR_CMND_OPCD 0x05 /* Read Status Register */ +#define MV_MX25L_WRSR_CMND_OPCD 0x01 /* Write Status Register */ +#define MV_MX25L_READ_CMND_OPCD 0x03 /* Sequential Read */ +#define MV_MX25L_FAST_RD_CMND_OPCD 0x0B /* Fast Read */ +#define MV_MX25L_PP_CMND_OPCD 0x02 /* Page Program */ +#define MV_MX25L_SE_CMND_OPCD 0xD8 /* Sector Erase */ +#define MV_MX25L_BE_CMND_OPCD 0xC7 /* Bulk Erase */ +#define MV_MX25L_DP_CMND_OPCD 0xB9 /* Deep Power Down */ +#define MV_MX25L_RES_CMND_OPCD 0xAB /* Read Electronic Signature */ + +/* Status Register Write Protect Bit Masks - 4bits */ +#define MV_MX25L_STATUS_REG_WP_MASK (0x0F << MV_SFLASH_STATUS_REG_WP_OFFSET) +#define MV_MX25L_STATUS_BP_NONE (0x00 << MV_SFLASH_STATUS_REG_WP_OFFSET) +#define MV_MX25L_STATUS_BP_1_OF_128 (0x01 << MV_SFLASH_STATUS_REG_WP_OFFSET) +#define MV_MX25L_STATUS_BP_1_OF_64 (0x02 << MV_SFLASH_STATUS_REG_WP_OFFSET) +#define MV_MX25L_STATUS_BP_1_OF_32 (0x03 << MV_SFLASH_STATUS_REG_WP_OFFSET) +#define MV_MX25L_STATUS_BP_1_OF_16 (0x04 << MV_SFLASH_STATUS_REG_WP_OFFSET) +#define MV_MX25L_STATUS_BP_1_OF_8 (0x05 << MV_SFLASH_STATUS_REG_WP_OFFSET) +#define MV_MX25L_STATUS_BP_1_OF_4 (0x06 << MV_SFLASH_STATUS_REG_WP_OFFSET) +#define MV_MX25L_STATUS_BP_1_OF_2 (0x07 << MV_SFLASH_STATUS_REG_WP_OFFSET) +#define MV_MX25L_STATUS_BP_ALL (0x0F << MV_SFLASH_STATUS_REG_WP_OFFSET) + +/************************************/ +/* SPANSION S25FL128P Device Specific */ +/************************************/ + +/* Manufacturer IDs and Device IDs for SFLASHs supported by the driver */ +#define MV_SPANSION_MANF_ID 0x01 +#define MV_S25FL128_DEVICE_ID 0x2018 +#define MV_S25FL128_MAX_SPI_FREQ 33000000 /* 33MHz */ +#define MV_S25FL128_MAX_FAST_SPI_FREQ 104000000 /* 104MHz */ +#define MV_S25FL128_FAST_READ_DUMMY_BYTES 1 + +/* Sector Sizes and population per device model*/ +#define MV_S25FL128_SECTOR_SIZE 0x40000 /* 256K */ +#define MV_S25FL128_SECTOR_NUMBER 64 +#define MV_S25FL_PAGE_SIZE 0x100 /* 256 byte */ + +#define MV_S25FL_WREN_CMND_OPCD 0x06 /* Write Enable */ +#define MV_S25FL_WRDI_CMND_OPCD 0x04 /* Write Disable */ +#define MV_S25FL_RDID_CMND_OPCD 0x9F /* Read ID */ +#define MV_S25FL_RDSR_CMND_OPCD 0x05 /* Read Status Register */ +#define MV_S25FL_WRSR_CMND_OPCD 0x01 /* Write Status Register */ +#define MV_S25FL_READ_CMND_OPCD 0x03 /* Sequential Read */ +#define MV_S25FL_FAST_RD_CMND_OPCD 0x0B /* Fast Read */ +#define MV_S25FL_PP_CMND_OPCD 0x02 /* Page Program */ +#define MV_S25FL_SE_CMND_OPCD 0xD8 /* Sector Erase */ +#define MV_S25FL_BE_CMND_OPCD 0xC7 /* Bulk Erase */ +#define MV_S25FL_DP_CMND_OPCD 0xB9 /* Deep Power Down */ +#define MV_S25FL_RES_CMND_OPCD 0xAB /* Read Electronic Signature */ + +/* Status Register Write Protect Bit Masks - 4bits */ +#define MV_S25FL_STATUS_REG_WP_MASK (0x0F << MV_SFLASH_STATUS_REG_WP_OFFSET) +#define MV_S25FL_STATUS_BP_NONE (0x00 << MV_SFLASH_STATUS_REG_WP_OFFSET) +#define MV_S25FL_STATUS_BP_1_OF_128 (0x01 << MV_SFLASH_STATUS_REG_WP_OFFSET) +#define MV_S25FL_STATUS_BP_1_OF_64 (0x02 << MV_SFLASH_STATUS_REG_WP_OFFSET) +#define MV_S25FL_STATUS_BP_1_OF_32 (0x03 << MV_SFLASH_STATUS_REG_WP_OFFSET) +#define MV_S25FL_STATUS_BP_1_OF_16 (0x04 << MV_SFLASH_STATUS_REG_WP_OFFSET) +#define MV_S25FL_STATUS_BP_1_OF_8 (0x05 << MV_SFLASH_STATUS_REG_WP_OFFSET) +#define MV_S25FL_STATUS_BP_1_OF_4 (0x06 << MV_SFLASH_STATUS_REG_WP_OFFSET) +#define MV_S25FL_STATUS_BP_1_OF_2 (0x07 << MV_SFLASH_STATUS_REG_WP_OFFSET) +#define MV_S25FL_STATUS_BP_ALL (0x0F << MV_SFLASH_STATUS_REG_WP_OFFSET) + +#endif /* __INCmvSFlashSpecH */ + diff --git a/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/mv_hal/spi/mvSpi.c b/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/mv_hal/spi/mvSpi.c new file mode 100644 index 0000000000..39e0b720d1 --- /dev/null +++ b/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/mv_hal/spi/mvSpi.c @@ -0,0 +1,576 @@ +/******************************************************************************* +Copyright (C) Marvell International Ltd. and its affiliates + +This software file (the "File") is owned and distributed by Marvell +International Ltd. and/or its affiliates ("Marvell") under the following +alternative licensing terms. Once you have made an election to distribute the +File under one of the following license alternatives, please (i) delete this +introductory statement regarding license alternatives, (ii) delete the two +license alternatives that you have not elected to use and (iii) preserve the +Marvell copyright notice above. + +******************************************************************************** +Marvell Commercial License Option + +If you received this File from Marvell and you have entered into a commercial +license agreement (a "Commercial License") with Marvell, the File is licensed +to you under the terms of the applicable Commercial License. + +******************************************************************************** +Marvell GPL License Option + +If you received this File from Marvell, you may opt to use, redistribute and/or +modify this File in accordance with the terms and conditions of the General +Public License Version 2, June 1991 (the "GPL License"), a copy of which is +available along with the File in the license.txt file or by writing to the Free +Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or +on the worldwide web at http://www.gnu.org/licenses/gpl.txt. + +THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED +WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY +DISCLAIMED. The GPL License provides additional details about this warranty +disclaimer. +******************************************************************************** +Marvell BSD License Option + +If you received this File from Marvell, you may opt to use, redistribute and/or +modify this File under the following licensing terms. +Redistribution and use in source and binary forms, with or without modification, +are permitted provided that the following conditions are met: + + * Redistributions of source code must retain the above copyright notice, + this list of conditions and the following disclaimer. + + * Redistributions in binary form must reproduce the above copyright + notice, this list of conditions and the following disclaimer in the + documentation and/or other materials provided with the distribution. + + * Neither the name of Marvell nor the names of its contributors may be + used to endorse or promote products derived from this software without + specific prior written permission. + +THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND +ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED +WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE +DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR +ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES +(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; +LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON +ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS +SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + +*******************************************************************************/ + +#include "spi/mvSpi.h" +#include "spi/mvSpiSpec.h" + +#include "ctrlEnv/mvCtrlEnvLib.h" + +/* #define MV_DEBUG */ +#ifdef MV_DEBUG +#define DB(x) x +#define mvOsPrintf printf +#else +#define DB(x) +#endif + + +/******************************************************************************* +* mvSpi16bitDataTxRx - Transmt and receive data +* +* DESCRIPTION: +* Tx data and block waiting for data to be transmitted +* +********************************************************************************/ +static MV_STATUS mvSpi16bitDataTxRx (MV_U16 txData, MV_U16 * pRxData) +{ + MV_U32 i; + MV_BOOL ready = MV_FALSE; + + /* First clear the bit in the interrupt cause register */ + MV_REG_WRITE(MV_SPI_INT_CAUSE_REG, 0x0); + + /* Transmit data */ + MV_REG_WRITE(MV_SPI_DATA_OUT_REG, MV_16BIT_LE(txData)); + + /* wait with timeout for memory ready */ + for (i=0; i> 8) & 0xFF); + +#elif defined(MV_CPU_BE) + + /* perform the data write to the buffer in two stages with 8bit each */ + MV_U8 * bptr = (MV_U8 *)pRxData; + MV_U16 data = MV_16BIT_LE(MV_REG_READ(MV_SPI_DATA_IN_REG)); + *bptr = ((data >> 8) & 0xFF); + ++bptr; + *bptr = (data & 0xFF); + +#else + #error "CPU endianess isn't defined!\n" +#endif + + } + else + *pRxData = MV_16BIT_LE(MV_REG_READ(MV_SPI_DATA_IN_REG)); + } + + return MV_OK; +} + + +/******************************************************************************* +* mvSpi8bitDataTxRx - Transmt and receive data (8bits) +* +* DESCRIPTION: +* Tx data and block waiting for data to be transmitted +* +********************************************************************************/ +static MV_STATUS mvSpi8bitDataTxRx (MV_U8 txData, MV_U8 * pRxData) +{ + MV_U32 i; + MV_BOOL ready = MV_FALSE; + + /* First clear the bit in the interrupt cause register */ + MV_REG_WRITE(MV_SPI_INT_CAUSE_REG, 0x0); + + /* Transmit data */ + MV_REG_WRITE(MV_SPI_DATA_OUT_REG, txData); + + /* wait with timeout for memory ready */ + for (i=0; i serialBaudRate) + continue; + + /* check for exact fit */ + if ((cpuClk / preScale[i]) == serialBaudRate) + { + bestPrescaleIndx = i; + break; + } + + /* check if this is better than the previous one */ + if ((serialBaudRate - (cpuClk / preScale[i])) < minBaudOffset) + { + minBaudOffset = (serialBaudRate - (cpuClk / preScale[i])); + bestPrescaleIndx = i; + } + } + + if (bestPrescaleIndx > 14) + { + mvOsPrintf("%s ERROR: SPI baud rate prescale error!\n", __FUNCTION__); + return MV_OUT_OF_RANGE; + } + + /* configure the Prescale */ + tempReg = MV_REG_READ(MV_SPI_IF_CONFIG_REG); + tempReg = ((tempReg & ~MV_SPI_CLK_PRESCALE_MASK) | (bestPrescaleIndx + 0x12)); + MV_REG_WRITE(MV_SPI_IF_CONFIG_REG, tempReg); + + return MV_OK; +} + +/******************************************************************************* +* mvSpiCsAssert - Assert the Chip Select pin indicating a new transfer +* +* DESCRIPTION: +* Assert The chip select - used to select an external SPI device +* +* INPUT: +* None. +* +* OUTPUT: +* None. +* +* RETURN: +* Success or Error code. +* +********************************************************************************/ +MV_VOID mvSpiCsAssert(MV_VOID) +{ + /* For devices in which the SPI is muxed on the MPP with other interfaces*/ + mvMPPConfigToSPI(); + mvOsUDelay(1); + MV_REG_BIT_SET(MV_SPI_IF_CTRL_REG, MV_SPI_CS_ENABLE_MASK); +} + +/******************************************************************************* +* mvSpiCsDeassert - DeAssert the Chip Select pin indicating the end of a +* SPI transfer sequence +* +* DESCRIPTION: +* DeAssert the chip select pin +* +* INPUT: +* None. +* +* OUTPUT: +* None. +* +* RETURN: +* Success or Error code. +* +********************************************************************************/ +MV_VOID mvSpiCsDeassert(MV_VOID) +{ + MV_REG_BIT_RESET(MV_SPI_IF_CTRL_REG, MV_SPI_CS_ENABLE_MASK); + + /* For devices in which the SPI is muxed on the MPP with other interfaces*/ + mvMPPConfigToDefault(); +} + +/******************************************************************************* +* mvSpiRead - Read a buffer over the SPI interface +* +* DESCRIPTION: +* Receive (read) a buffer over the SPI interface in 16bit chunks. If the +* buffer size is odd, then the last chunk will be 8bits. Chip select is not +* handled at this level. +* +* INPUT: +* pRxBuff: Pointer to the buffer to hold the received data +* buffSize: length of the pRxBuff +* +* OUTPUT: +* pRxBuff: Pointer to the buffer with the received data +* +* RETURN: +* Success or Error code. +* +* +*******************************************************************************/ +MV_STATUS mvSpiRead (MV_U8* pRxBuff, MV_U32 buffSize) +{ + MV_STATUS ret; + MV_U32 bytesLeft = buffSize; + MV_U16* rxPtr = (MV_U16*)pRxBuff; + + /* check for null parameters */ + if (pRxBuff == NULL) + { + mvOsPrintf("%s ERROR: Null pointer parameter!\n", __FUNCTION__); + return MV_BAD_PARAM; + } + + /* Check that the buffer pointer and the buffer size are 16bit aligned */ + if ((((MV_U32)buffSize & 1) == 0) && (((MV_U32)pRxBuff & 1) == 0)) + { + /* Verify that the SPI mode is in 16bit mode */ + MV_REG_BIT_SET(MV_SPI_IF_CONFIG_REG, MV_SPI_BYTE_LENGTH_MASK); + + /* TX/RX as long we have complete 16bit chunks */ + while (bytesLeft >= MV_SPI_16_BIT_CHUNK_SIZE) + { + /* Transmitted and wait for the transfer to be completed */ + if ((ret = mvSpi16bitDataTxRx(MV_SPI_DUMMY_WRITE_16BITS, rxPtr)) != MV_OK) + return ret; + + /* increment the pointers */ + rxPtr++; + bytesLeft -= MV_SPI_16_BIT_CHUNK_SIZE; + } + + } + else + { + /* Verify that the SPI mode is in 8bit mode */ + MV_REG_BIT_RESET(MV_SPI_IF_CONFIG_REG, MV_SPI_BYTE_LENGTH_MASK); + + /* TX/RX in 8bit chanks */ + while (bytesLeft > 0) + { + /* Transmitted and wait for the transfer to be completed */ + if ((ret = mvSpi8bitDataTxRx(MV_SPI_DUMMY_WRITE_8BITS, pRxBuff)) != MV_OK) + return ret; + /* increment the pointers */ + pRxBuff++; + bytesLeft--; + } + } + + return MV_OK; +} + +/******************************************************************************* +* mvSpiWrite - Transmit a buffer over the SPI interface +* +* DESCRIPTION: +* Transmit a buffer over the SPI interface in 16bit chunks. If the +* buffer size is odd, then the last chunk will be 8bits. No chip select +* action is taken. +* +* INPUT: +* pTxBuff: Pointer to the buffer holding the TX data +* buffSize: length of the pTxBuff +* +* OUTPUT: +* None. +* +* RETURN: +* Success or Error code. +* +* +*******************************************************************************/ +MV_STATUS mvSpiWrite(MV_U8* pTxBuff, MV_U32 buffSize) +{ + MV_STATUS ret; + MV_U32 bytesLeft = buffSize; + MV_U16* txPtr = (MV_U16*)pTxBuff; + + /* check for null parameters */ + if (pTxBuff == NULL) + { + mvOsPrintf("%s ERROR: Null pointer parameter!\n", __FUNCTION__); + return MV_BAD_PARAM; + } + + /* Check that the buffer pointer and the buffer size are 16bit aligned */ + if ((((MV_U32)buffSize & 1) == 0) && (((MV_U32)pTxBuff & 1) == 0)) + { + /* Verify that the SPI mode is in 16bit mode */ + MV_REG_BIT_SET(MV_SPI_IF_CONFIG_REG, MV_SPI_BYTE_LENGTH_MASK); + + /* TX/RX as long we have complete 16bit chunks */ + while (bytesLeft >= MV_SPI_16_BIT_CHUNK_SIZE) + { + /* Transmitted and wait for the transfer to be completed */ + if ((ret = mvSpi16bitDataTxRx(*txPtr, NULL)) != MV_OK) + return ret; + + /* increment the pointers */ + txPtr++; + bytesLeft -= MV_SPI_16_BIT_CHUNK_SIZE; + } + } + else + { + + /* Verify that the SPI mode is in 8bit mode */ + MV_REG_BIT_RESET(MV_SPI_IF_CONFIG_REG, MV_SPI_BYTE_LENGTH_MASK); + + /* TX/RX in 8bit chanks */ + while (bytesLeft > 0) + { + /* Transmitted and wait for the transfer to be completed */ + if ((ret = mvSpi8bitDataTxRx(*pTxBuff, NULL)) != MV_OK) + return ret; + + /* increment the pointers */ + pTxBuff++; + bytesLeft--; + } + } + + return MV_OK; +} + + +/******************************************************************************* +* mvSpiReadWrite - Read and Write a buffer simultanuosely +* +* DESCRIPTION: +* Transmit and receive a buffer over the SPI in 16bit chunks. If the +* buffer size is odd, then the last chunk will be 8bits. The SPI chip +* select is not handled implicitely. +* +* INPUT: +* pRxBuff: Pointer to the buffer to write the RX info in +* pTxBuff: Pointer to the buffer holding the TX info +* buffSize: length of both the pTxBuff and pRxBuff +* +* OUTPUT: +* pRxBuff: Pointer of the buffer holding the RX data +* +* RETURN: +* Success or Error code. +* +* +*******************************************************************************/ +MV_STATUS mvSpiReadWrite(MV_U8* pRxBuff, MV_U8* pTxBuff, MV_U32 buffSize) +{ + MV_STATUS ret; + MV_U32 bytesLeft = buffSize; + MV_U16* txPtr = (MV_U16*)pTxBuff; + MV_U16* rxPtr = (MV_U16*)pRxBuff; + + /* check for null parameters */ + if ((pRxBuff == NULL) || (pTxBuff == NULL)) + { + mvOsPrintf("%s ERROR: Null pointer parameter!\n", __FUNCTION__); + return MV_BAD_PARAM; + } + + /* Check that the buffer pointer and the buffer size are 16bit aligned */ + if ((((MV_U32)buffSize & 1) == 0) && (((MV_U32)pTxBuff & 1) == 0) && (((MV_U32)pRxBuff & 1) == 0)) + { + /* Verify that the SPI mode is in 16bit mode */ + MV_REG_BIT_SET(MV_SPI_IF_CONFIG_REG, MV_SPI_BYTE_LENGTH_MASK); + + /* TX/RX as long we have complete 16bit chunks */ + while (bytesLeft >= MV_SPI_16_BIT_CHUNK_SIZE) + { + /* Transmitted and wait for the transfer to be completed */ + if ((ret = mvSpi16bitDataTxRx(*txPtr, rxPtr)) != MV_OK) + return ret; + + /* increment the pointers */ + txPtr++; + rxPtr++; + bytesLeft -= MV_SPI_16_BIT_CHUNK_SIZE; + } + } + else + { + /* Verify that the SPI mode is in 8bit mode */ + MV_REG_BIT_RESET(MV_SPI_IF_CONFIG_REG, MV_SPI_BYTE_LENGTH_MASK); + + /* TX/RX in 8bit chanks */ + while (bytesLeft > 0) + { + /* Transmitted and wait for the transfer to be completed */ + if ( (ret = mvSpi8bitDataTxRx(*pTxBuff, pRxBuff) ) != MV_OK) + return ret; + pRxBuff++; + pTxBuff++; + bytesLeft--; + } + } + + return MV_OK; +} + + diff --git a/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/mv_hal/spi/mvSpi.h b/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/mv_hal/spi/mvSpi.h new file mode 100644 index 0000000000..74859f03e7 --- /dev/null +++ b/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/mv_hal/spi/mvSpi.h @@ -0,0 +1,94 @@ +/******************************************************************************* +Copyright (C) Marvell International Ltd. and its affiliates + +This software file (the "File") is owned and distributed by Marvell +International Ltd. and/or its affiliates ("Marvell") under the following +alternative licensing terms. Once you have made an election to distribute the +File under one of the following license alternatives, please (i) delete this +introductory statement regarding license alternatives, (ii) delete the two +license alternatives that you have not elected to use and (iii) preserve the +Marvell copyright notice above. + +******************************************************************************** +Marvell Commercial License Option + +If you received this File from Marvell and you have entered into a commercial +license agreement (a "Commercial License") with Marvell, the File is licensed +to you under the terms of the applicable Commercial License. + +******************************************************************************** +Marvell GPL License Option + +If you received this File from Marvell, you may opt to use, redistribute and/or +modify this File in accordance with the terms and conditions of the General +Public License Version 2, June 1991 (the "GPL License"), a copy of which is +available along with the File in the license.txt file or by writing to the Free +Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or +on the worldwide web at http://www.gnu.org/licenses/gpl.txt. + +THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED +WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY +DISCLAIMED. The GPL License provides additional details about this warranty +disclaimer. +******************************************************************************** +Marvell BSD License Option + +If you received this File from Marvell, you may opt to use, redistribute and/or +modify this File under the following licensing terms. +Redistribution and use in source and binary forms, with or without modification, +are permitted provided that the following conditions are met: + + * Redistributions of source code must retain the above copyright notice, + this list of conditions and the following disclaimer. + + * Redistributions in binary form must reproduce the above copyright + notice, this list of conditions and the following disclaimer in the + documentation and/or other materials provided with the distribution. + + * Neither the name of Marvell nor the names of its contributors may be + used to endorse or promote products derived from this software without + specific prior written permission. + +THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND +ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED +WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE +DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR +ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES +(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; +LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON +ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS +SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + +*******************************************************************************/ + +#ifndef __INCmvSpihH +#define __INCmvSpihH + +#include "mvCommon.h" +#include "mvOs.h" +#include "ctrlEnv/mvCtrlEnvSpec.h" + +/* Function Prototypes */ +/* Init */ +MV_STATUS mvSpiInit (MV_U32 serialBaudRate); + +/* Set the Frequency of the Spi clock */ +MV_STATUS mvSpiBaudRateSet(MV_U32 serialBaudRate); + +/* Assert the SPI chip select */ +MV_VOID mvSpiCsAssert (MV_VOID); + +/* De-assert the SPI chip select */ +MV_VOID mvSpiCsDeassert (MV_VOID); + +/* Simultanuous Read and write */ +MV_STATUS mvSpiReadWrite (MV_U8* pRxBuff, MV_U8* pTxBuff, MV_U32 buffSize); + +/* serialize a buffer on the TX line - Rx is ignored */ +MV_STATUS mvSpiWrite (MV_U8* pTxBuff, MV_U32 buffSize); + +/* read from the RX line by writing dummy values to the TX line */ +MV_STATUS mvSpiRead (MV_U8* pRxBuff, MV_U32 buffSize); + +#endif /* __INCmvSpihH */ diff --git a/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/mv_hal/spi/mvSpiCmnd.c b/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/mv_hal/spi/mvSpiCmnd.c new file mode 100644 index 0000000000..a5d5a6478b --- /dev/null +++ b/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/mv_hal/spi/mvSpiCmnd.c @@ -0,0 +1,249 @@ +/******************************************************************************* +Copyright (C) Marvell International Ltd. and its affiliates + +This software file (the "File") is owned and distributed by Marvell +International Ltd. and/or its affiliates ("Marvell") under the following +alternative licensing terms. Once you have made an election to distribute the +File under one of the following license alternatives, please (i) delete this +introductory statement regarding license alternatives, (ii) delete the two +license alternatives that you have not elected to use and (iii) preserve the +Marvell copyright notice above. + +******************************************************************************** +Marvell Commercial License Option + +If you received this File from Marvell and you have entered into a commercial +license agreement (a "Commercial License") with Marvell, the File is licensed +to you under the terms of the applicable Commercial License. + +******************************************************************************** +Marvell GPL License Option + +If you received this File from Marvell, you may opt to use, redistribute and/or +modify this File in accordance with the terms and conditions of the General +Public License Version 2, June 1991 (the "GPL License"), a copy of which is +available along with the File in the license.txt file or by writing to the Free +Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or +on the worldwide web at http://www.gnu.org/licenses/gpl.txt. + +THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED +WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY +DISCLAIMED. The GPL License provides additional details about this warranty +disclaimer. +******************************************************************************** +Marvell BSD License Option + +If you received this File from Marvell, you may opt to use, redistribute and/or +modify this File under the following licensing terms. +Redistribution and use in source and binary forms, with or without modification, +are permitted provided that the following conditions are met: + + * Redistributions of source code must retain the above copyright notice, + this list of conditions and the following disclaimer. + + * Redistributions in binary form must reproduce the above copyright + notice, this list of conditions and the following disclaimer in the + documentation and/or other materials provided with the distribution. + + * Neither the name of Marvell nor the names of its contributors may be + used to endorse or promote products derived from this software without + specific prior written permission. + +THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND +ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED +WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE +DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR +ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES +(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; +LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON +ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS +SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + +*******************************************************************************/ + +#include "spi/mvSpi.h" +#include "spi/mvSpiSpec.h" + +/*#define MV_DEBUG*/ +#ifdef MV_DEBUG +#define DB(x) x +#else +#define DB(x) +#endif + + +/******************************************************************************* +* mvSpiReadAndWrite - Read and Write a buffer simultanuousely +* +* DESCRIPTION: +* Transmit and receive a buffer over the SPI in 16bit chunks. If the +* buffer size is odd, then the last chunk will be 8bits. +* +* INPUT: +* pRxBuff: Pointer to the buffer to write the RX info in +* pTxBuff: Pointer to the buffer holding the TX info +* buffSize: length of both the pTxBuff and pRxBuff +* +* OUTPUT: +* pRxBuff: Pointer of the buffer holding the RX data +* +* RETURN: +* Success or Error code. +* +* +*******************************************************************************/ +MV_STATUS mvSpiReadAndWrite(MV_U8* pRxBuff, MV_U8* pTxBuff, MV_U32 buffSize) +{ + MV_STATUS ret; + + /* check for null parameters */ + if ((pRxBuff == NULL) || (pTxBuff == NULL) || (buffSize == 0)) + { + mvOsPrintf("%s ERROR: Null pointer parameter!\n", __FUNCTION__); + return MV_BAD_PARAM; + } + + /* First assert the chip select */ + mvSpiCsAssert(); + + ret = mvSpiReadWrite(pRxBuff, pTxBuff, buffSize); + + /* Finally deassert the chip select */ + mvSpiCsDeassert(); + + return ret; +} + +/******************************************************************************* +* mvSpiWriteThenWrite - Serialize a command followed by the data over the TX line +* +* DESCRIPTION: +* Assert the chip select line. Transmit the command buffer followed by +* the data buffer. Then deassert the CS line. +* +* INPUT: +* pCmndBuff: Pointer to the command buffer to transmit +* cmndSize: length of the command size +* pTxDataBuff: Pointer to the data buffer to transmit +* txDataSize: length of the data buffer +* +* OUTPUT: +* None. +* +* RETURN: +* Success or Error code. +* +* +*******************************************************************************/ +MV_STATUS mvSpiWriteThenWrite (MV_U8* pCmndBuff, MV_U32 cmndSize, MV_U8* pTxDataBuff, + MV_U32 txDataSize) +{ + MV_STATUS ret = MV_OK, tempRet; + + /* check for null parameters */ +#ifndef CONFIG_MARVELL + if(NULL == pTxDataBuff) + { + mvOsPrintf("%s ERROR: Null pointer parameter!\n", __FUNCTION__); + return MV_BAD_PARAM; + } +#endif + + if (pCmndBuff == NULL) + { + mvOsPrintf("%s ERROR: Null pointer parameter!\n", __FUNCTION__); + return MV_BAD_PARAM; + } + + /* First assert the chip select */ + mvSpiCsAssert(); + + /* first write the command */ + if ((cmndSize) && (pCmndBuff != NULL)) + { + if ((tempRet = mvSpiWrite(pCmndBuff, cmndSize)) != MV_OK) + ret = tempRet; + } + + /* Then write the data buffer */ +#ifndef CONFIG_MARVELL + if (txDataSize) +#else + if ((txDataSize) && (pTxDataBuff != NULL)) +#endif + { + if ((tempRet = mvSpiWrite(pTxDataBuff, txDataSize)) != MV_OK) + ret = tempRet; + } + + /* Finally deassert the chip select */ + mvSpiCsDeassert(); + + return ret; +} + +/******************************************************************************* +* mvSpiWriteThenRead - Serialize a command then read a data buffer +* +* DESCRIPTION: +* Assert the chip select line. Transmit the command buffer then read +* the data buffer. Then deassert the CS line. +* +* INPUT: +* pCmndBuff: Pointer to the command buffer to transmit +* cmndSize: length of the command size +* pRxDataBuff: Pointer to the buffer to read the data in +* txDataSize: length of the data buffer +* +* OUTPUT: +* pRxDataBuff: Pointer to the buffer holding the data +* +* RETURN: +* Success or Error code. +* +* +*******************************************************************************/ +MV_STATUS mvSpiWriteThenRead (MV_U8* pCmndBuff, MV_U32 cmndSize, MV_U8* pRxDataBuff, + MV_U32 rxDataSize,MV_U32 dummyBytesToRead) +{ + MV_STATUS ret = MV_OK, tempRet; + MV_U8 dummyByte; + + /* check for null parameters */ + if ((pCmndBuff == NULL) && (pRxDataBuff == NULL)) + { + mvOsPrintf("%s ERROR: Null pointer parameter!\n", __FUNCTION__); + return MV_BAD_PARAM; + } + + /* First assert the chip select */ + mvSpiCsAssert(); + + /* first write the command */ + if ((cmndSize) && (pCmndBuff != NULL)) + { + if ((tempRet = mvSpiWrite(pCmndBuff, cmndSize)) != MV_OK) + ret = tempRet; + } + + /* Read dummy bytes before real data. */ + while(dummyBytesToRead) + { + mvSpiRead(&dummyByte,1); + dummyBytesToRead--; + } + + /* Then write the data buffer */ + if ((rxDataSize) && (pRxDataBuff != NULL)) + { + if ((tempRet = mvSpiRead(pRxDataBuff, rxDataSize)) != MV_OK) + ret = tempRet; + } + + /* Finally deassert the chip select */ + mvSpiCsDeassert(); + + return ret; +} + diff --git a/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/mv_hal/spi/mvSpiCmnd.h b/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/mv_hal/spi/mvSpiCmnd.h new file mode 100644 index 0000000000..329e26b7c0 --- /dev/null +++ b/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/mv_hal/spi/mvSpiCmnd.h @@ -0,0 +1,82 @@ +/******************************************************************************* +Copyright (C) Marvell International Ltd. and its affiliates + +This software file (the "File") is owned and distributed by Marvell +International Ltd. and/or its affiliates ("Marvell") under the following +alternative licensing terms. Once you have made an election to distribute the +File under one of the following license alternatives, please (i) delete this +introductory statement regarding license alternatives, (ii) delete the two +license alternatives that you have not elected to use and (iii) preserve the +Marvell copyright notice above. + +******************************************************************************** +Marvell Commercial License Option + +If you received this File from Marvell and you have entered into a commercial +license agreement (a "Commercial License") with Marvell, the File is licensed +to you under the terms of the applicable Commercial License. + +******************************************************************************** +Marvell GPL License Option + +If you received this File from Marvell, you may opt to use, redistribute and/or +modify this File in accordance with the terms and conditions of the General +Public License Version 2, June 1991 (the "GPL License"), a copy of which is +available along with the File in the license.txt file or by writing to the Free +Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or +on the worldwide web at http://www.gnu.org/licenses/gpl.txt. + +THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED +WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY +DISCLAIMED. The GPL License provides additional details about this warranty +disclaimer. +******************************************************************************** +Marvell BSD License Option + +If you received this File from Marvell, you may opt to use, redistribute and/or +modify this File under the following licensing terms. +Redistribution and use in source and binary forms, with or without modification, +are permitted provided that the following conditions are met: + + * Redistributions of source code must retain the above copyright notice, + this list of conditions and the following disclaimer. + + * Redistributions in binary form must reproduce the above copyright + notice, this list of conditions and the following disclaimer in the + documentation and/or other materials provided with the distribution. + + * Neither the name of Marvell nor the names of its contributors may be + used to endorse or promote products derived from this software without + specific prior written permission. + +THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND +ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED +WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE +DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR +ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES +(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; +LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON +ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS +SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + +*******************************************************************************/ + +#ifndef __INCmvSpiCmndhH +#define __INCmvSpiCmndhH + +#include "mvTypes.h" + +/* Function Prototypes */ + +/* Simultanuous Read and write */ +MV_STATUS mvSpiReadAndWrite (MV_U8* pRxBuff, MV_U8* pTxBuff, MV_U32 buffSize); + +/* write command - write a command and then write data */ +MV_STATUS mvSpiWriteThenWrite (MV_U8* pCmndBuff, MV_U32 cmndSize, MV_U8* pTxDataBuff, MV_U32 txDataSize); + +/* read command - write a command and then read data by writing dummy data */ +MV_STATUS mvSpiWriteThenRead (MV_U8* pCmndBuff, MV_U32 cmndSize, MV_U8* pRxDataBuff, + MV_U32 rxDataSize,MV_U32 dummyBytesToRead); + +#endif /* __INCmvSpiCmndhH */ diff --git a/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/mv_hal/spi/mvSpiSpec.h b/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/mv_hal/spi/mvSpiSpec.h new file mode 100644 index 0000000000..658159abbb --- /dev/null +++ b/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/mv_hal/spi/mvSpiSpec.h @@ -0,0 +1,98 @@ +/******************************************************************************* +Copyright (C) Marvell International Ltd. and its affiliates + +This software file (the "File") is owned and distributed by Marvell +International Ltd. and/or its affiliates ("Marvell") under the following +alternative licensing terms. Once you have made an election to distribute the +File under one of the following license alternatives, please (i) delete this +introductory statement regarding license alternatives, (ii) delete the two +license alternatives that you have not elected to use and (iii) preserve the +Marvell copyright notice above. + +******************************************************************************** +Marvell Commercial License Option + +If you received this File from Marvell and you have entered into a commercial +license agreement (a "Commercial License") with Marvell, the File is licensed +to you under the terms of the applicable Commercial License. + +******************************************************************************** +Marvell GPL License Option + +If you received this File from Marvell, you may opt to use, redistribute and/or +modify this File in accordance with the terms and conditions of the General +Public License Version 2, June 1991 (the "GPL License"), a copy of which is +available along with the File in the license.txt file or by writing to the Free +Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or +on the worldwide web at http://www.gnu.org/licenses/gpl.txt. + +THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED +WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY +DISCLAIMED. The GPL License provides additional details about this warranty +disclaimer. +******************************************************************************** +Marvell BSD License Option + +If you received this File from Marvell, you may opt to use, redistribute and/or +modify this File under the following licensing terms. +Redistribution and use in source and binary forms, with or without modification, +are permitted provided that the following conditions are met: + + * Redistributions of source code must retain the above copyright notice, + this list of conditions and the following disclaimer. + + * Redistributions in binary form must reproduce the above copyright + notice, this list of conditions and the following disclaimer in the + documentation and/or other materials provided with the distribution. + + * Neither the name of Marvell nor the names of its contributors may be + used to endorse or promote products derived from this software without + specific prior written permission. + +THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND +ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED +WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE +DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR +ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES +(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; +LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON +ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS +SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + +*******************************************************************************/ + +#ifndef __INCmvSpiSpecH +#define __INCmvSpiSpecH + +/* Constants */ +#define MV_SPI_WAIT_RDY_MAX_LOOP 100000 +#define MV_SPI_16_BIT_CHUNK_SIZE 2 +#define MV_SPI_DUMMY_WRITE_16BITS 0xFFFF +#define MV_SPI_DUMMY_WRITE_8BITS 0xFF + +/* Marvell Flash Device Controller Registers */ +#define MV_SPI_CTRLR_OFST 0x10600 +#define MV_SPI_IF_CTRL_REG (MV_SPI_CTRLR_OFST + 0x00) +#define MV_SPI_IF_CONFIG_REG (MV_SPI_CTRLR_OFST + 0x04) +#define MV_SPI_DATA_OUT_REG (MV_SPI_CTRLR_OFST + 0x08) +#define MV_SPI_DATA_IN_REG (MV_SPI_CTRLR_OFST + 0x0c) +#define MV_SPI_INT_CAUSE_REG (MV_SPI_CTRLR_OFST + 0x10) +#define MV_SPI_INT_CAUSE_MASK_REG (MV_SPI_CTRLR_OFST + 0x14) + +/* Serial Memory Interface Control Register Masks */ +#define MV_SPI_CS_ENABLE_OFFSET 0 /* bit 0 */ +#define MV_SPI_MEMORY_READY_OFFSET 1 /* bit 1 */ +#define MV_SPI_CS_ENABLE_MASK (0x1 << MV_SPI_CS_ENABLE_OFFSET) +#define MV_SPI_MEMORY_READY_MASK (0x1 << MV_SPI_MEMORY_READY_OFFSET) + +/* Serial Memory Interface Configuration Register Masks */ +#define MV_SPI_CLK_PRESCALE_OFFSET 0 /* bit 0-4 */ +#define MV_SPI_BYTE_LENGTH_OFFSET 5 /* bit 5 */ +#define MV_SPI_ADDRESS_BURST_LENGTH_OFFSET 8 /* bit 8-9 */ +#define MV_SPI_CLK_PRESCALE_MASK (0x1F << MV_SPI_CLK_PRESCALE_OFFSET) +#define MV_SPI_BYTE_LENGTH_MASK (0x1 << MV_SPI_BYTE_LENGTH_OFFSET) +#define MV_SPI_ADDRESS_BURST_LENGTH_MASK (0x3 << MV_SPI_ADDRESS_BURST_LENGTH_OFFSET) + +#endif /* __INCmvSpiSpecH */ + diff --git a/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/mv_hal/twsi/mvTwsi.c b/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/mv_hal/twsi/mvTwsi.c new file mode 100644 index 0000000000..0bf8b7571b --- /dev/null +++ b/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/mv_hal/twsi/mvTwsi.c @@ -0,0 +1,1023 @@ +/******************************************************************************* +Copyright (C) Marvell International Ltd. and its affiliates + +This software file (the "File") is owned and distributed by Marvell +International Ltd. and/or its affiliates ("Marvell") under the following +alternative licensing terms. Once you have made an election to distribute the +File under one of the following license alternatives, please (i) delete this +introductory statement regarding license alternatives, (ii) delete the two +license alternatives that you have not elected to use and (iii) preserve the +Marvell copyright notice above. + +******************************************************************************** +Marvell Commercial License Option + +If you received this File from Marvell and you have entered into a commercial +license agreement (a "Commercial License") with Marvell, the File is licensed +to you under the terms of the applicable Commercial License. + +******************************************************************************** +Marvell GPL License Option + +If you received this File from Marvell, you may opt to use, redistribute and/or +modify this File in accordance with the terms and conditions of the General +Public License Version 2, June 1991 (the "GPL License"), a copy of which is +available along with the File in the license.txt file or by writing to the Free +Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or +on the worldwide web at http://www.gnu.org/licenses/gpl.txt. + +THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED +WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY +DISCLAIMED. The GPL License provides additional details about this warranty +disclaimer. +******************************************************************************** +Marvell BSD License Option + +If you received this File from Marvell, you may opt to use, redistribute and/or +modify this File under the following licensing terms. +Redistribution and use in source and binary forms, with or without modification, +are permitted provided that the following conditions are met: + + * Redistributions of source code must retain the above copyright notice, + this list of conditions and the following disclaimer. + + * Redistributions in binary form must reproduce the above copyright + notice, this list of conditions and the following disclaimer in the + documentation and/or other materials provided with the distribution. + + * Neither the name of Marvell nor the names of its contributors may be + used to endorse or promote products derived from this software without + specific prior written permission. + +THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND +ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED +WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE +DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR +ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES +(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; +LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON +ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS +SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + +*******************************************************************************/ + + +#include "mvTwsi.h" +#include "mvTwsiSpec.h" +#include "cpu/mvCpu.h" + + +/*#define MV_DEBUG*/ +#ifdef MV_DEBUG +#define DB(x) x +#else +#define DB(x) +#endif + +static MV_VOID twsiIntFlgClr(MV_U8 chanNum); +static MV_BOOL twsiMainIntGet(MV_U8 chanNum); +static MV_VOID twsiAckBitSet(MV_U8 chanNum); +static MV_U32 twsiStsGet(MV_U8 chanNum); +static MV_VOID twsiReset(MV_U8 chanNum); +static MV_STATUS twsiAddr7BitSet(MV_U8 chanNum, MV_U32 deviceAddress,MV_TWSI_CMD command); +static MV_STATUS twsiAddr10BitSet(MV_U8 chanNum, MV_U32 deviceAddress,MV_TWSI_CMD command); +static MV_STATUS twsiDataTransmit(MV_U8 chanNum, MV_U8 *pBlock, MV_U32 blockSize); +static MV_STATUS twsiDataReceive(MV_U8 chanNum, MV_U8 *pBlock, MV_U32 blockSize); +static MV_STATUS twsiTargetOffsSet(MV_U8 chanNum, MV_U32 offset,MV_BOOL moreThen256); + + +static MV_BOOL twsiTimeoutChk(MV_U32 timeout, const MV_8 *pString) +{ + if(timeout >= TWSI_TIMEOUT_VALUE) + { + DB(mvOsPrintf("%s",pString)); + return MV_TRUE; + } + return MV_FALSE; + +} +/******************************************************************************* +* mvTwsiStartBitSet - Set start bit on the bus +* +* DESCRIPTION: +* This routine sets the start bit on the TWSI bus. +* The routine first checks for interrupt flag condition, then it sets +* the start bit in the TWSI Control register. +* If the interrupt flag condition check previously was set, the function +* will clear it. +* The function then wait for the start bit to be cleared by the HW. +* Then it waits for the interrupt flag to be set and eventually, the +* TWSI status is checked to be 0x8 or 0x10(repeated start bit). +* +* INPUT: +* chanNum - TWSI channel. +* +* OUTPUT: +* None. +* +* RETURN: +* MV_OK is start bit was set successfuly on the bus. +* MV_FAIL if interrupt flag was set before setting start bit. +* +*******************************************************************************/ +MV_STATUS mvTwsiStartBitSet(MV_U8 chanNum) +{ + MV_BOOL isIntFlag = MV_FALSE; + MV_U32 timeout, temp; + + DB(mvOsPrintf("TWSI: mvTwsiStartBitSet \n")); + /* check Int flag */ + if(twsiMainIntGet(chanNum)) + isIntFlag = MV_TRUE; + /* set start Bit */ + temp = MV_REG_READ(TWSI_CONTROL_REG(chanNum)); + MV_REG_WRITE(TWSI_CONTROL_REG(chanNum), temp | TWSI_CONTROL_START_BIT); + + /* in case that the int flag was set before i.e. repeated start bit */ + if(isIntFlag){ + DB(mvOsPrintf("TWSI: mvTwsiStartBitSet repeated start Bit\n")); + twsiIntFlgClr(chanNum); + } + + /* wait for interrupt */ + timeout = 0; + while(!twsiMainIntGet(chanNum) && (timeout++ < TWSI_TIMEOUT_VALUE)); + + /* check for timeout */ + if(MV_TRUE == twsiTimeoutChk(timeout,"TWSI: mvTwsiStartBitSet ERROR - Start Clear bit TimeOut .\n")) + return MV_TIMEOUT; + + + /* check that start bit went down */ + if((MV_REG_READ(TWSI_CONTROL_REG(chanNum)) & TWSI_CONTROL_START_BIT) != 0) + { + mvOsPrintf("TWSI: mvTwsiStartBitSet ERROR - start bit didn't went down\n"); + return MV_FAIL; + } + + /* check the status */ + temp = twsiStsGet(chanNum); + if(( temp != TWSI_START_CON_TRA ) && ( temp != TWSI_REPEATED_START_CON_TRA )) + { + mvOsPrintf("TWSI: mvTwsiStartBitSet ERROR - status %x after Set Start Bit. \n",temp); + return MV_FAIL; + } + + return MV_OK; + +} + +/******************************************************************************* +* mvTwsiStopBitSet - Set stop bit on the bus +* +* DESCRIPTION: +* This routine set the stop bit on the TWSI bus. +* The function then wait for the stop bit to be cleared by the HW. +* Finally the function checks for status of 0xF8. +* +* INPUT: +* chanNum - TWSI channel +* +* OUTPUT: +* None. +* +* RETURN: +* MV_TRUE is stop bit was set successfuly on the bus. +* +*******************************************************************************/ +MV_STATUS mvTwsiStopBitSet(MV_U8 chanNum) +{ + MV_U32 timeout, temp; + + /* Generate stop bit */ + temp = MV_REG_READ(TWSI_CONTROL_REG(chanNum)); + MV_REG_WRITE(TWSI_CONTROL_REG(chanNum), temp | TWSI_CONTROL_STOP_BIT); + + twsiIntFlgClr(chanNum); + + /* wait for stop bit to come down */ + timeout = 0; + while( ((MV_REG_READ(TWSI_CONTROL_REG(chanNum)) & TWSI_CONTROL_STOP_BIT) != 0) && (timeout++ < TWSI_TIMEOUT_VALUE)); + + /* check for timeout */ + if(MV_TRUE == twsiTimeoutChk(timeout,"TWSI: mvTwsiStopBitSet ERROR - Stop bit TimeOut .\n")) + return MV_TIMEOUT; + + /* check that the stop bit went down */ + if((MV_REG_READ(TWSI_CONTROL_REG(chanNum)) & TWSI_CONTROL_STOP_BIT) != 0) + { + mvOsPrintf("TWSI: mvTwsiStopBitSet ERROR - stop bit didn't went down. \n"); + return MV_FAIL; + } + + /* check the status */ + temp = twsiStsGet(chanNum); + if( temp != TWSI_NO_REL_STS_INT_FLAG_IS_KEPT_0){ + mvOsPrintf("TWSI: mvTwsiStopBitSet ERROR - status %x after Stop Bit. \n", temp); + return MV_FAIL; + } + + return MV_OK; +} + +/******************************************************************************* +* twsiMainIntGet - Get twsi bit from main Interrupt cause. +* +* DESCRIPTION: +* This routine returns the twsi interrupt flag value. +* +* INPUT: +* None. +* +* OUTPUT: +* None. +* +* RETURN: +* MV_TRUE is interrupt flag is set, MV_FALSE otherwise. +* +*******************************************************************************/ +static MV_BOOL twsiMainIntGet(MV_U8 chanNum) +{ + MV_U32 temp; + + /* get the int flag bit */ + + temp = MV_REG_READ(TWSI_CPU_MAIN_INT_CAUSE_REG); + if (temp & (TWSI0_CPU_MAIN_INT_BIT << chanNum)) + return MV_TRUE; + + return MV_FALSE; +} +/******************************************************************************* +* twsiIntFlgClr - Clear Interrupt flag. +* +* DESCRIPTION: +* This routine clears the interrupt flag. It does NOT poll the interrupt +* to make sure the clear. After clearing the interrupt, it waits for at +* least 1 miliseconds. +* +* INPUT: +* chanNum - TWSI channel +* +* OUTPUT: +* None. +* +* RETURN: +* None. +* +*******************************************************************************/ +static MV_VOID twsiIntFlgClr(MV_U8 chanNum) +{ + MV_U32 temp; + + /* wait for 1 mili to prevent TWSI register write after write problems */ + mvOsDelay(1); + /* clear the int flag bit */ + temp = MV_REG_READ(TWSI_CONTROL_REG(chanNum)); + MV_REG_WRITE(TWSI_CONTROL_REG(chanNum),temp & ~(TWSI_CONTROL_INT_FLAG_SET)); + + /* wait for 1 mili sec for the clear to take effect */ + mvOsDelay(1); + + return; +} + + +/******************************************************************************* +* twsiAckBitSet - Set acknowledge bit on the bus +* +* DESCRIPTION: +* This routine set the acknowledge bit on the TWSI bus. +* +* INPUT: +* None. +* +* OUTPUT: +* None. +* +* RETURN: +* None. +* +*******************************************************************************/ +static MV_VOID twsiAckBitSet(MV_U8 chanNum) +{ + MV_U32 temp; + + /*Set the Ack bit */ + temp = MV_REG_READ(TWSI_CONTROL_REG(chanNum)); + MV_REG_WRITE(TWSI_CONTROL_REG(chanNum), temp | TWSI_CONTROL_ACK); + + /* Add delay of 1ms */ + mvOsDelay(1); + return; +} + + +/******************************************************************************* +* twsiInit - Initialize TWSI interface +* +* DESCRIPTION: +* This routine: +* -Reset the TWSI. +* -Initialize the TWSI clock baud rate according to given frequancy +* parameter based on Tclk frequancy and enables TWSI slave. +* -Set the ack bit. +* -Assign the TWSI slave address according to the TWSI address Type. +* +* +* INPUT: +* chanNum - TWSI channel +* frequancy - TWSI frequancy in KHz. (up to 100KHZ) +* +* OUTPUT: +* None. +* +* RETURN: +* Actual frequancy. +* +*******************************************************************************/ +MV_U32 mvTwsiInit(MV_U8 chanNum, MV_HZ frequancy, MV_U32 Tclk, MV_TWSI_ADDR *pTwsiAddr, MV_BOOL generalCallEnable) +{ + MV_U32 n,m,freq,margin,minMargin = 0xffffffff; + MV_U32 power; + MV_U32 actualFreq = 0,actualN = 0,actualM = 0,val; + + if(frequancy > 100000) + { + mvOsPrintf("Warning TWSI frequancy is too high, please use up tp 100Khz. \n"); + } + + DB(mvOsPrintf("TWSI: mvTwsiInit - Tclk = %d freq = %d\n",Tclk,frequancy)); + /* Calucalte N and M for the TWSI clock baud rate */ + for(n = 0 ; n < 8 ; n++) + { + for(m = 0 ; m < 16 ; m++) + { + power = 2 << n; /* power = 2^(n+1) */ + freq = Tclk/(10*(m+1)*power); + margin = MV_ABS(frequancy - freq); + if(margin < minMargin) + { + minMargin = margin; + actualFreq = freq; + actualN = n; + actualM = m; + } + } + } + DB(mvOsPrintf("TWSI: mvTwsiInit - actN %d actM %d actFreq %d\n",actualN , actualM, actualFreq)); + /* Reset the TWSI logic */ + twsiReset(chanNum); + + /* Set the baud rate */ + val = ((actualM<< TWSI_BAUD_RATE_M_OFFS) | actualN << TWSI_BAUD_RATE_N_OFFS); + MV_REG_WRITE(TWSI_STATUS_BAUDE_RATE_REG(chanNum),val); + + /* Enable the TWSI and slave */ + MV_REG_WRITE(TWSI_CONTROL_REG(chanNum), TWSI_CONTROL_ENA | TWSI_CONTROL_ACK); + + /* set the TWSI slave address */ + if( pTwsiAddr->type == ADDR10_BIT )/* 10 Bit deviceAddress */ + { + /* writing the 2 most significant bits of the 10 bit address*/ + val = ((pTwsiAddr->address & TWSI_SLAVE_ADDR_10BIT_MASK) >> TWSI_SLAVE_ADDR_10BIT_OFFS ); + /* bits 7:3 must be 0x11110 */ + val |= TWSI_SLAVE_ADDR_10BIT_CONST; + /* set GCE bit */ + if(generalCallEnable) + val |= TWSI_SLAVE_ADDR_GCE_ENA; + /* write slave address */ + MV_REG_WRITE(TWSI_SLAVE_ADDR_REG(chanNum),val); + + /* writing the 8 least significant bits of the 10 bit address*/ + val = (pTwsiAddr->address << TWSI_EXTENDED_SLAVE_OFFS) & TWSI_EXTENDED_SLAVE_MASK; + MV_REG_WRITE(TWSI_EXTENDED_SLAVE_ADDR_REG(chanNum), val); + } + else /*7 bit address*/ + { + /* set the 7 Bits address */ + MV_REG_WRITE(TWSI_EXTENDED_SLAVE_ADDR_REG(chanNum),0x0); + val = (pTwsiAddr->address << TWSI_SLAVE_ADDR_7BIT_OFFS) & TWSI_SLAVE_ADDR_7BIT_MASK; + MV_REG_WRITE(TWSI_SLAVE_ADDR_REG(chanNum), val); + } + + /* unmask twsi int */ + val = MV_REG_READ(TWSI_CONTROL_REG(chanNum)); + MV_REG_WRITE(TWSI_CONTROL_REG(chanNum), val | TWSI_CONTROL_INT_ENA); + /* Add delay of 1ms */ + mvOsDelay(1); + + return actualFreq; +} + + +/******************************************************************************* +* twsiStsGet - Get the TWSI status value. +* +* DESCRIPTION: +* This routine returns the TWSI status value. +* +* INPUT: +* chanNum - TWSI channel +* +* OUTPUT: +* None. +* +* RETURN: +* MV_U32 - the TWSI status. +* +*******************************************************************************/ +static MV_U32 twsiStsGet(MV_U8 chanNum) +{ + return MV_REG_READ(TWSI_STATUS_BAUDE_RATE_REG(chanNum)); + +} + +/******************************************************************************* +* twsiReset - Reset the TWSI. +* +* DESCRIPTION: +* Resets the TWSI logic and sets all TWSI registers to their reset values. +* +* INPUT: +* chanNum - TWSI channel +* +* OUTPUT: +* None. +* +* RETURN: +* None +* +*******************************************************************************/ +static MV_VOID twsiReset(MV_U8 chanNum) +{ + /* Reset the TWSI logic */ + MV_REG_WRITE(TWSI_SOFT_RESET_REG(chanNum),0); + + /* wait for 2 mili sec */ + mvOsDelay(2); + + return; +} + + + + +/******************************* POLICY ****************************************/ + + + +/******************************************************************************* +* mvTwsiAddrSet - Set address on TWSI bus. +* +* DESCRIPTION: +* This function Set address (7 or 10 Bit address) on the Twsi Bus. +* +* INPUT: +* chanNum - TWSI channel +* pTwsiAddr - twsi address. +* command - read / write . +* +* OUTPUT: +* None. +* +* RETURN: +* MV_OK - if setting the address completed succesfully. +* MV_FAIL otherwmise. +* +*******************************************************************************/ +MV_STATUS mvTwsiAddrSet(MV_U8 chanNum, MV_TWSI_ADDR *pTwsiAddr, MV_TWSI_CMD command) +{ + DB(mvOsPrintf("TWSI: mvTwsiAddr7BitSet addr %x , type %d, cmd is %s\n",pTwsiAddr->address,\ + pTwsiAddr->type, ((command==MV_TWSI_WRITE)?"Write":"Read") )); + /* 10 Bit address */ + if(pTwsiAddr->type == ADDR10_BIT) + { + return twsiAddr10BitSet(chanNum, pTwsiAddr->address,command); + } + /* 7 Bit address */ + else + { + return twsiAddr7BitSet(chanNum, pTwsiAddr->address,command); + } + +} + +/******************************************************************************* +* twsiAddr10BitSet - Set 10 Bit address on TWSI bus. +* +* DESCRIPTION: +* There are two address phases: +* 1) Write '11110' to data register bits [7:3] and 10-bit address MSB +* (bits [9:8]) to data register bits [2:1] plus a write(0) or read(1) bit +* to the Data register. Then it clears interrupt flag which drive +* the address on the TWSI bus. The function then waits for interrupt +* flag to be active and status 0x18 (write) or 0x40 (read) to be set. +* 2) write the rest of 10-bit address to data register and clears +* interrupt flag which drive the address on the TWSI bus. The +* function then waits for interrupt flag to be active and status +* 0xD0 (write) or 0xE0 (read) to be set. +* +* INPUT: +* chanNum - TWSI channel +* deviceAddress - twsi address. +* command - read / write . +* +* OUTPUT: +* None. +* +* RETURN: +* MV_OK - if setting the address completed succesfully. +* MV_FAIL otherwmise. +* +*******************************************************************************/ +static MV_STATUS twsiAddr10BitSet(MV_U8 chanNum, MV_U32 deviceAddress,MV_TWSI_CMD command) +{ + MV_U32 val,timeout; + + /* writing the 2 most significant bits of the 10 bit address*/ + val = ((deviceAddress & TWSI_DATA_ADDR_10BIT_MASK) >> TWSI_DATA_ADDR_10BIT_OFFS ); + /* bits 7:3 must be 0x11110 */ + val |= TWSI_DATA_ADDR_10BIT_CONST; + /* set command */ + val |= command; + MV_REG_WRITE(TWSI_DATA_REG(chanNum), val); + /* WA add a delay */ + mvOsDelay(1); + + /* clear Int flag */ + twsiIntFlgClr(chanNum); + + /* wait for Int to be Set */ + timeout = 0; + while( !twsiMainIntGet(chanNum) && (timeout++ < TWSI_TIMEOUT_VALUE)); + + /* check for timeout */ + if(MV_TRUE == twsiTimeoutChk(timeout,"TWSI: twsiAddr10BitSet ERROR - 1st addr (10Bit) Int TimeOut.\n")) + return MV_TIMEOUT; + + /* check the status */ + val = twsiStsGet(chanNum); + if(( (val != TWSI_AD_PLS_RD_BIT_TRA_ACK_REC) && (command == MV_TWSI_READ ) ) || + ( (val != TWSI_AD_PLS_WR_BIT_TRA_ACK_REC) && (command == MV_TWSI_WRITE) )) + { + mvOsPrintf("TWSI: twsiAddr10BitSet ERROR - status %x 1st addr (10 Bit) in %s mode.\n"\ + ,val, ((command==MV_TWSI_WRITE)?"Write":"Read") ); + return MV_FAIL; + } + + /* set 8 LSB of the address */ + val = (deviceAddress << TWSI_DATA_ADDR_7BIT_OFFS) & TWSI_DATA_ADDR_7BIT_MASK; + MV_REG_WRITE(TWSI_DATA_REG(chanNum), val); + + /* clear Int flag */ + twsiIntFlgClr(chanNum); + + /* wait for Int to be Set */ + timeout = 0; + while( !twsiMainIntGet(chanNum) && (timeout++ < TWSI_TIMEOUT_VALUE)); + + /* check for timeout */ + if(MV_TRUE == twsiTimeoutChk(timeout,"TWSI: twsiAddr10BitSet ERROR - 2nd (10 Bit) Int TimOut.\n")) + return MV_TIMEOUT; + + /* check the status */ + val = twsiStsGet(chanNum); + if(( (val != TWSI_SEC_AD_PLS_RD_BIT_TRA_ACK_REC) && (command == MV_TWSI_READ ) ) || + ( (val != TWSI_SEC_AD_PLS_WR_BIT_TRA_ACK_REC) && (command == MV_TWSI_WRITE) )) + { + mvOsPrintf("TWSI: twsiAddr10BitSet ERROR - status %x 2nd addr(10 Bit) in %s mode.\n"\ + ,val, ((command==MV_TWSI_WRITE)?"Write":"Read") ); + return MV_FAIL; + } + + return MV_OK; +} + +/******************************************************************************* +* twsiAddr7BitSet - Set 7 Bit address on TWSI bus. +* +* DESCRIPTION: +* This function writes 7 bit address plus a write or read bit to the +* Data register. Then it clears interrupt flag which drive the address on +* the TWSI bus. The function then waits for interrupt flag to be active +* and status 0x18 (write) or 0x40 (read) to be set. +* +* INPUT: +* chanNum - TWSI channel +* deviceAddress - twsi address. +* command - read / write . +* +* OUTPUT: +* None. +* +* RETURN: +* MV_OK - if setting the address completed succesfully. +* MV_FAIL otherwmise. +* +*******************************************************************************/ +static MV_STATUS twsiAddr7BitSet(MV_U8 chanNum, MV_U32 deviceAddress,MV_TWSI_CMD command) +{ + MV_U32 val,timeout; + + /* set the address */ + val = (deviceAddress << TWSI_DATA_ADDR_7BIT_OFFS) & TWSI_DATA_ADDR_7BIT_MASK; + /* set command */ + val |= command; + MV_REG_WRITE(TWSI_DATA_REG(chanNum), val); + /* WA add a delay */ + mvOsDelay(1); + + /* clear Int flag */ + twsiIntFlgClr(chanNum); + + /* wait for Int to be Set */ + timeout = 0; + while( !twsiMainIntGet(chanNum) && (timeout++ < TWSI_TIMEOUT_VALUE)); + + /* check for timeout */ + if(MV_TRUE == twsiTimeoutChk(timeout,"TWSI: twsiAddr7BitSet ERROR - Addr (7 Bit) int TimeOut.\n")) + return MV_TIMEOUT; + + /* check the status */ + val = twsiStsGet(chanNum); + if(( (val != TWSI_AD_PLS_RD_BIT_TRA_ACK_REC) && (command == MV_TWSI_READ ) ) || + ( (val != TWSI_AD_PLS_WR_BIT_TRA_ACK_REC) && (command == MV_TWSI_WRITE) )) + { + /* only in debug, since in boot we try to read the SPD of both DRAM, and we don't + want error messeges in case DIMM doesn't exist. */ + DB(mvOsPrintf("TWSI: twsiAddr7BitSet ERROR - status %x addr (7 Bit) in %s mode.\n"\ + ,val,((command==MV_TWSI_WRITE)?"Write":"Read") )); + return MV_FAIL; + } + + return MV_OK; +} + +/******************************************************************************* +* twsiDataWrite - Trnasmit a data block over TWSI bus. +* +* DESCRIPTION: +* This function writes a given data block to TWSI bus in 8 bit granularity. +* first The function waits for interrupt flag to be active then +* For each 8-bit data: +* The function writes data to data register. It then clears +* interrupt flag which drives the data on the TWSI bus. +* The function then waits for interrupt flag to be active and status +* 0x28 to be set. +* +* +* INPUT: +* chanNum - TWSI channel +* pBlock - Data block. +* blockSize - number of chars in pBlock. +* +* OUTPUT: +* None. +* +* RETURN: +* MV_OK - if transmiting the block completed succesfully, +* MV_BAD_PARAM - if pBlock is NULL, +* MV_FAIL otherwmise. +* +*******************************************************************************/ +static MV_STATUS twsiDataTransmit(MV_U8 chanNum, MV_U8 *pBlock, MV_U32 blockSize) +{ + MV_U32 timeout, temp, blockSizeWr = blockSize; + + if(NULL == pBlock) + return MV_BAD_PARAM; + + /* wait for Int to be Set */ + timeout = 0; + while( !twsiMainIntGet(chanNum) && (timeout++ < TWSI_TIMEOUT_VALUE)); + + /* check for timeout */ + if(MV_TRUE == twsiTimeoutChk(timeout,"TWSI: twsiDataTransmit ERROR - Read Data Int TimeOut.\n")) + return MV_TIMEOUT; + + while(blockSizeWr) + { + /* write the data*/ + MV_REG_WRITE(TWSI_DATA_REG(chanNum),(MV_U32)*pBlock); + DB(mvOsPrintf("TWSI: twsiDataTransmit place = %d write %x \n",\ + blockSize - blockSizeWr, *pBlock)); + pBlock++; + blockSizeWr--; + + twsiIntFlgClr(chanNum); + + /* wait for Int to be Set */ + timeout = 0; + while( !twsiMainIntGet(chanNum) && (timeout++ < TWSI_TIMEOUT_VALUE)); + + /* check for timeout */ + if(MV_TRUE == twsiTimeoutChk(timeout,"TWSI: twsiDataTransmit ERROR - Read Data Int TimeOut.\n")) + return MV_TIMEOUT; + + /* check the status */ + temp = twsiStsGet(chanNum); + if(temp != TWSI_M_TRAN_DATA_BYTE_ACK_REC) + { + mvOsPrintf("TWSI: twsiDataTransmit ERROR - status %x in write trans\n",temp); + return MV_FAIL; + } + + } + + return MV_OK; +} + +/******************************************************************************* +* twsiDataReceive - Receive data block from TWSI bus. +* +* DESCRIPTION: +* This function receive data block from TWSI bus in 8bit granularity +* into pBlock buffer. +* first The function waits for interrupt flag to be active then +* For each 8-bit data: +* It clears the interrupt flag which allows the next data to be +* received from TWSI bus. +* The function waits for interrupt flag to be active, +* and status reg is 0x50. +* Then the function reads data from data register, and copies it to +* the given buffer. +* +* INPUT: +* chanNum - TWSI channel +* blockSize - number of bytes to read. +* +* OUTPUT: +* pBlock - Data block. +* +* RETURN: +* MV_OK - if receive transaction completed succesfully, +* MV_BAD_PARAM - if pBlock is NULL, +* MV_FAIL otherwmise. +* +*******************************************************************************/ +static MV_STATUS twsiDataReceive(MV_U8 chanNum, MV_U8 *pBlock, MV_U32 blockSize) +{ + MV_U32 timeout, temp, blockSizeRd = blockSize; + if(NULL == pBlock) + return MV_BAD_PARAM; + + /* wait for Int to be Set */ + timeout = 0; + while( !twsiMainIntGet(chanNum) && (timeout++ < TWSI_TIMEOUT_VALUE)); + + /* check for timeout */ + if(MV_TRUE == twsiTimeoutChk(timeout,"TWSI: twsiDataReceive ERROR - Read Data int Time out .\n")) + return MV_TIMEOUT; + + while(blockSizeRd) + { + if(blockSizeRd == 1) + { + /* clear ack and Int flag */ + temp = MV_REG_READ(TWSI_CONTROL_REG(chanNum)); + temp &= ~(TWSI_CONTROL_ACK); + MV_REG_WRITE(TWSI_CONTROL_REG(chanNum), temp); + } + twsiIntFlgClr(chanNum); + /* wait for Int to be Set */ + timeout = 0; + while( (!twsiMainIntGet(chanNum)) && (timeout++ < TWSI_TIMEOUT_VALUE)); + + /* check for timeout */ + if(MV_TRUE == twsiTimeoutChk(timeout,"TWSI: twsiDataReceive ERROR - Read Data Int Time out .\n")) + return MV_TIMEOUT; + + /* check the status */ + temp = twsiStsGet(chanNum); + if((temp != TWSI_M_REC_RD_DATA_ACK_TRA) && (blockSizeRd !=1)) + { + mvOsPrintf("TWSI: twsiDataReceive ERROR - status %x in read trans \n",temp); + return MV_FAIL; + } + else if((temp != TWSI_M_REC_RD_DATA_ACK_NOT_TRA) && (blockSizeRd ==1)) + { + mvOsPrintf("TWSI: twsiDataReceive ERROR - status %x in Rd Terminate\n",temp); + return MV_FAIL; + } + + /* read the data*/ + *pBlock = (MV_U8)MV_REG_READ(TWSI_DATA_REG(chanNum)); + DB(mvOsPrintf("TWSI: twsiDataReceive place %d read %x \n",\ + blockSize - blockSizeRd,*pBlock)); + pBlock++; + blockSizeRd--; + } + + return MV_OK; +} + + + +/******************************************************************************* +* twsiTargetOffsSet - Set TWST target offset on TWSI bus. +* +* DESCRIPTION: +* The function support TWSI targets that have inside address space (for +* example EEPROMs). The function: +* 1) Convert the given offset into pBlock and size. +* in case the offset should be set to a TWSI slave which support +* more then 256 bytes offset, the offset setting will be done +* in 2 transactions. +* 2) Use twsiDataTransmit to place those on the bus. +* +* INPUT: +* chanNum - TWSI channel +* offset - offset to be set on the EEPROM device. +* moreThen256 - whether the EEPROM device support more then 256 byte offset. +* +* OUTPUT: +* None. +* +* RETURN: +* MV_OK - if setting the offset completed succesfully. +* MV_FAIL otherwmise. +* +*******************************************************************************/ +static MV_STATUS twsiTargetOffsSet(MV_U8 chanNum, MV_U32 offset, MV_BOOL moreThen256) +{ + MV_U8 offBlock[2]; + MV_U32 offSize; + + if(moreThen256 == MV_TRUE) + { + offBlock[0] = (offset >> 8) & 0xff; + offBlock[1] = offset & 0xff; + offSize = 2; + } + else + { + offBlock[0] = offset & 0xff; + offSize = 1; + } + DB(mvOsPrintf("TWSI: twsiTargetOffsSet offSize = %x addr1 = %x addr2 = %x\n",\ + offSize,offBlock[0],offBlock[1])); + return twsiDataTransmit(chanNum, offBlock, offSize); + +} + +/******************************************************************************* +* mvTwsiRead - Read data block from a TWSI Slave. +* +* DESCRIPTION: +* The function calls the following functions: +* -) mvTwsiStartBitSet(); +* if(EEPROM device) +* -) mvTwsiAddrSet(w); +* -) twsiTargetOffsSet(); +* -) mvTwsiStartBitSet(); +* -) mvTwsiAddrSet(r); +* -) twsiDataReceive(); +* -) mvTwsiStopBitSet(); +* +* INPUT: +* chanNum - TWSI channel +* pTwsiSlave - Twsi Slave structure. +* blockSize - number of bytes to read. +* +* OUTPUT: +* pBlock - Data block. +* +* RETURN: +* MV_OK - if EEPROM read transaction completed succesfully, +* MV_BAD_PARAM - if pBlock is NULL, +* MV_FAIL otherwmise. +* +*******************************************************************************/ +MV_STATUS mvTwsiRead(MV_U8 chanNum, MV_TWSI_SLAVE *pTwsiSlave, MV_U8 *pBlock, MV_U32 blockSize) +{ + if((NULL == pBlock) || (NULL == pTwsiSlave)) + return MV_BAD_PARAM; + if(MV_OK != mvTwsiStartBitSet(chanNum)) + { + mvTwsiStopBitSet(chanNum); + return MV_FAIL; + } + + DB(mvOsPrintf("TWSI: mvTwsiEepromRead after mvTwsiStartBitSet\n")); + + /* in case offset exsist (i.e. eeprom ) */ + if(MV_TRUE == pTwsiSlave->validOffset) + { + if(MV_OK != mvTwsiAddrSet(chanNum, &(pTwsiSlave->slaveAddr), MV_TWSI_WRITE)) + { + mvTwsiStopBitSet(chanNum); + return MV_FAIL; + } + DB(mvOsPrintf("TWSI: mvTwsiEepromRead after mvTwsiAddrSet\n")); + if(MV_OK != twsiTargetOffsSet(chanNum, pTwsiSlave->offset, pTwsiSlave->moreThen256)) + { + mvTwsiStopBitSet(chanNum); + return MV_FAIL; + } + DB(mvOsPrintf("TWSI: mvTwsiEepromRead after twsiTargetOffsSet\n")); + if(MV_OK != mvTwsiStartBitSet(chanNum)) + { + mvTwsiStopBitSet(chanNum); + return MV_FAIL; + } + DB(mvOsPrintf("TWSI: mvTwsiEepromRead after mvTwsiStartBitSet\n")); + } + if(MV_OK != mvTwsiAddrSet(chanNum, &(pTwsiSlave->slaveAddr), MV_TWSI_READ)) + { + mvTwsiStopBitSet(chanNum); + return MV_FAIL; + } + DB(mvOsPrintf("TWSI: mvTwsiEepromRead after mvTwsiAddrSet\n")); + if(MV_OK != twsiDataReceive(chanNum, pBlock, blockSize)) + { + mvTwsiStopBitSet(chanNum); + return MV_FAIL; + } + DB(mvOsPrintf("TWSI: mvTwsiEepromRead after twsiDataReceive\n")); + + if(MV_OK != mvTwsiStopBitSet(chanNum)) + { + return MV_FAIL; + } + + twsiAckBitSet(chanNum); + + DB(mvOsPrintf("TWSI: mvTwsiEepromRead after mvTwsiStopBitSet\n")); + + return MV_OK; +} + +/******************************************************************************* +* mvTwsiWrite - Write data block to a TWSI Slave. +* +* DESCRIPTION: +* The function calls the following functions: +* -) mvTwsiStartBitSet(); +* -) mvTwsiAddrSet(); +* -)if(EEPROM device) +* -) twsiTargetOffsSet(); +* -) twsiDataTransmit(); +* -) mvTwsiStopBitSet(); +* +* INPUT: +* chanNum - TWSI channel +* eepromAddress - eeprom address. +* blockSize - number of bytes to write. +* pBlock - Data block. +* +* OUTPUT: +* None +* +* RETURN: +* MV_OK - if EEPROM read transaction completed succesfully. +* MV_BAD_PARAM - if pBlock is NULL, +* MV_FAIL otherwmise. +* +* NOTE: Part of the EEPROM, required that the offset will be aligned to the +* max write burst supported. +*******************************************************************************/ +MV_STATUS mvTwsiWrite(MV_U8 chanNum, MV_TWSI_SLAVE *pTwsiSlave, MV_U8 *pBlock, MV_U32 blockSize) +{ + if((NULL == pBlock) || (NULL == pTwsiSlave)) + return MV_BAD_PARAM; + + if(MV_OK != mvTwsiStartBitSet(chanNum)) + { + mvTwsiStopBitSet(chanNum); + return MV_FAIL; + } + + DB(mvOsPrintf("TWSI: mvTwsiEepromWrite after mvTwsiStartBitSet\n")); + if(MV_OK != mvTwsiAddrSet(chanNum, &(pTwsiSlave->slaveAddr), MV_TWSI_WRITE)) + { + mvTwsiStopBitSet(chanNum); + return MV_FAIL; + } + DB(mvOsPrintf("TWSI :mvTwsiEepromWrite after mvTwsiAddrSet\n")); + + /* in case offset exsist (i.e. eeprom ) */ + if(MV_TRUE == pTwsiSlave->validOffset) + { + if(MV_OK != twsiTargetOffsSet(chanNum, pTwsiSlave->offset, pTwsiSlave->moreThen256)) + { + mvTwsiStopBitSet(chanNum); + return MV_FAIL; + } + DB(mvOsPrintf("TWSI: mvTwsiEepromWrite after twsiTargetOffsSet\n")); + } + if(MV_OK != twsiDataTransmit(chanNum, pBlock, blockSize)) + { + mvTwsiStopBitSet(chanNum); + return MV_FAIL; + } + DB(mvOsPrintf("TWSI: mvTwsiEepromWrite after twsiDataTransmit\n")); + if(MV_OK != mvTwsiStopBitSet(chanNum)) + { + return MV_FAIL; + } + DB(mvOsPrintf("TWSI: mvTwsiEepromWrite after mvTwsiStopBitSet\n")); + + return MV_OK; +} diff --git a/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/mv_hal/twsi/mvTwsi.h b/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/mv_hal/twsi/mvTwsi.h new file mode 100644 index 0000000000..bd5b6d0090 --- /dev/null +++ b/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/mv_hal/twsi/mvTwsi.h @@ -0,0 +1,121 @@ +/******************************************************************************* +Copyright (C) Marvell International Ltd. and its affiliates + +This software file (the "File") is owned and distributed by Marvell +International Ltd. and/or its affiliates ("Marvell") under the following +alternative licensing terms. Once you have made an election to distribute the +File under one of the following license alternatives, please (i) delete this +introductory statement regarding license alternatives, (ii) delete the two +license alternatives that you have not elected to use and (iii) preserve the +Marvell copyright notice above. + +******************************************************************************** +Marvell Commercial License Option + +If you received this File from Marvell and you have entered into a commercial +license agreement (a "Commercial License") with Marvell, the File is licensed +to you under the terms of the applicable Commercial License. + +******************************************************************************** +Marvell GPL License Option + +If you received this File from Marvell, you may opt to use, redistribute and/or +modify this File in accordance with the terms and conditions of the General +Public License Version 2, June 1991 (the "GPL License"), a copy of which is +available along with the File in the license.txt file or by writing to the Free +Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or +on the worldwide web at http://www.gnu.org/licenses/gpl.txt. + +THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED +WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY +DISCLAIMED. The GPL License provides additional details about this warranty +disclaimer. +******************************************************************************** +Marvell BSD License Option + +If you received this File from Marvell, you may opt to use, redistribute and/or +modify this File under the following licensing terms. +Redistribution and use in source and binary forms, with or without modification, +are permitted provided that the following conditions are met: + + * Redistributions of source code must retain the above copyright notice, + this list of conditions and the following disclaimer. + + * Redistributions in binary form must reproduce the above copyright + notice, this list of conditions and the following disclaimer in the + documentation and/or other materials provided with the distribution. + + * Neither the name of Marvell nor the names of its contributors may be + used to endorse or promote products derived from this software without + specific prior written permission. + +THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND +ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED +WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE +DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR +ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES +(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; +LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON +ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS +SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + +*******************************************************************************/ +#ifndef __INCmvTwsiH +#define __INCmvTwsiH + +#ifdef __cplusplus +extern "C" { +#endif /* __cplusplus */ + +/* need to update this includes */ +#include "twsi/mvTwsiSpec.h" +#include "ctrlEnv/mvCtrlEnvLib.h" + + +/* The TWSI interface supports both 7-bit and 10-bit addressing. */ +/* This enumerator describes addressing type. */ +typedef enum _mvTwsiAddrType +{ + ADDR7_BIT, /* 7 bit address */ + ADDR10_BIT /* 10 bit address */ +}MV_TWSI_ADDR_TYPE; + +/* This structure describes TWSI address. */ +typedef struct _mvTwsiAddr +{ + MV_U32 address; /* address */ + MV_TWSI_ADDR_TYPE type; /* Address type */ +}MV_TWSI_ADDR; + +/* This structure describes a TWSI slave. */ +typedef struct _mvTwsiSlave +{ + MV_TWSI_ADDR slaveAddr; + MV_BOOL validOffset; /* whether the slave has offset (i.e. Eeprom etc.) */ + MV_U32 offset; /* offset in the slave. */ + MV_BOOL moreThen256; /* whether the ofset is bigger then 256 */ +}MV_TWSI_SLAVE; + +/* This enumerator describes TWSI protocol commands. */ +typedef enum _mvTwsiCmd +{ + MV_TWSI_WRITE, /* TWSI write command - 0 according to spec */ + MV_TWSI_READ /* TWSI read command - 1 according to spec */ +}MV_TWSI_CMD; + +MV_STATUS mvTwsiStartBitSet(MV_U8 chanNum); +MV_STATUS mvTwsiStopBitSet(MV_U8 chanNum); +MV_STATUS mvTwsiAddrSet(MV_U8 chanNum, MV_TWSI_ADDR *twsiAddr, MV_TWSI_CMD command); + +MV_U32 mvTwsiInit(MV_U8 chanNum, MV_KHZ frequancy, MV_U32 Tclk, MV_TWSI_ADDR *twsiAddr, MV_BOOL generalCallEnable); +MV_STATUS mvTwsiRead (MV_U8 chanNum, MV_TWSI_SLAVE *twsiSlave, MV_U8 *pBlock, MV_U32 blockSize); +MV_STATUS mvTwsiWrite(MV_U8 chanNum, MV_TWSI_SLAVE *twsiSlave, MV_U8 *pBlock, MV_U32 blockSize); + + +#ifdef __cplusplus +} +#endif /* __cplusplus */ + +#endif /* __INCmvTwsiH */ + diff --git a/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/mv_hal/twsi/mvTwsiSpec.h b/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/mv_hal/twsi/mvTwsiSpec.h new file mode 100644 index 0000000000..d0c2b9e7bd --- /dev/null +++ b/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/mv_hal/twsi/mvTwsiSpec.h @@ -0,0 +1,160 @@ +/******************************************************************************* +Copyright (C) Marvell International Ltd. and its affiliates + +This software file (the "File") is owned and distributed by Marvell +International Ltd. and/or its affiliates ("Marvell") under the following +alternative licensing terms. Once you have made an election to distribute the +File under one of the following license alternatives, please (i) delete this +introductory statement regarding license alternatives, (ii) delete the two +license alternatives that you have not elected to use and (iii) preserve the +Marvell copyright notice above. + +******************************************************************************** +Marvell Commercial License Option + +If you received this File from Marvell and you have entered into a commercial +license agreement (a "Commercial License") with Marvell, the File is licensed +to you under the terms of the applicable Commercial License. + +******************************************************************************** +Marvell GPL License Option + +If you received this File from Marvell, you may opt to use, redistribute and/or +modify this File in accordance with the terms and conditions of the General +Public License Version 2, June 1991 (the "GPL License"), a copy of which is +available along with the File in the license.txt file or by writing to the Free +Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or +on the worldwide web at http://www.gnu.org/licenses/gpl.txt. + +THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED +WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY +DISCLAIMED. The GPL License provides additional details about this warranty +disclaimer. +******************************************************************************** +Marvell BSD License Option + +If you received this File from Marvell, you may opt to use, redistribute and/or +modify this File under the following licensing terms. +Redistribution and use in source and binary forms, with or without modification, +are permitted provided that the following conditions are met: + + * Redistributions of source code must retain the above copyright notice, + this list of conditions and the following disclaimer. + + * Redistributions in binary form must reproduce the above copyright + notice, this list of conditions and the following disclaimer in the + documentation and/or other materials provided with the distribution. + + * Neither the name of Marvell nor the names of its contributors may be + used to endorse or promote products derived from this software without + specific prior written permission. + +THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND +ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED +WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE +DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR +ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES +(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; +LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON +ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS +SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + +*******************************************************************************/ +/****************************************/ +/* TWSI Registers */ +/****************************************/ +#ifndef __INCmvTwsiSpech +#define __INCmvTwsiSpech + +#ifdef __cplusplus +extern "C" { +#endif /* __cplusplus */ + +/* defines */ +#define TWSI_SLAVE_ADDR_REG(chanNum) (TWSI_SLAVE_BASE(chanNum)+ 0x00) + +#define TWSI_SLAVE_ADDR_GCE_ENA BIT0 +#define TWSI_SLAVE_ADDR_7BIT_OFFS 0x1 +#define TWSI_SLAVE_ADDR_7BIT_MASK (0xFF << TWSI_SLAVE_ADDR_7BIT_OFFS) +#define TWSI_SLAVE_ADDR_10BIT_OFFS 0x7 +#define TWSI_SLAVE_ADDR_10BIT_MASK 0x300 +#define TWSI_SLAVE_ADDR_10BIT_CONST 0xF0 + + +#define TWSI_EXTENDED_SLAVE_ADDR_REG(chanNum) (TWSI_SLAVE_BASE(chanNum) + 0x10) +#define TWSI_EXTENDED_SLAVE_OFFS 0 +#define TWSI_EXTENDED_SLAVE_MASK (0xFF << TWSI_EXTENDED_SLAVE_OFFS) + + +#define TWSI_DATA_REG(chanNum) (TWSI_SLAVE_BASE(chanNum) + 0x04) +#define TWSI_DATA_COMMAND_OFFS 0x0 +#define TWSI_DATA_COMMAND_MASK (0x1 << TWSI_DATA_COMMAND_OFFS) +#define TWSI_DATA_COMMAND_WR (0x1 << TWSI_DATA_COMMAND_OFFS) +#define TWSI_DATA_COMMAND_RD (0x0 << TWSI_DATA_COMMAND_OFFS) +#define TWSI_DATA_ADDR_7BIT_OFFS 0x1 +#define TWSI_DATA_ADDR_7BIT_MASK (0xFF << TWSI_DATA_ADDR_7BIT_OFFS) +#define TWSI_DATA_ADDR_10BIT_OFFS 0x7 +#define TWSI_DATA_ADDR_10BIT_MASK 0x300 +#define TWSI_DATA_ADDR_10BIT_CONST 0xF0 + + +#define TWSI_CONTROL_REG(chanNum) (TWSI_SLAVE_BASE(chanNum) + 0x08) +#define TWSI_CONTROL_ACK BIT2 +#define TWSI_CONTROL_INT_FLAG_SET BIT3 +#define TWSI_CONTROL_STOP_BIT BIT4 +#define TWSI_CONTROL_START_BIT BIT5 +#define TWSI_CONTROL_ENA BIT6 +#define TWSI_CONTROL_INT_ENA BIT7 + + +#define TWSI_STATUS_BAUDE_RATE_REG(chanNum) (TWSI_SLAVE_BASE(chanNum) + 0x0c) +#define TWSI_BAUD_RATE_N_OFFS 0 +#define TWSI_BAUD_RATE_N_MASK (0x7 << TWSI_BAUD_RATE_N_OFFS) +#define TWSI_BAUD_RATE_M_OFFS 3 +#define TWSI_BAUD_RATE_M_MASK (0xF << TWSI_BAUD_RATE_M_OFFS) + +#define TWSI_SOFT_RESET_REG(chanNum) (TWSI_SLAVE_BASE(chanNum) + 0x1c) + +/* defines */ +#define TWSI_TIMEOUT_VALUE 0x500 + +/* TWSI status codes */ +#define TWSI_BUS_ERROR 0x00 +#define TWSI_START_CON_TRA 0x08 +#define TWSI_REPEATED_START_CON_TRA 0x10 +#define TWSI_AD_PLS_WR_BIT_TRA_ACK_REC 0x18 +#define TWSI_AD_PLS_WR_BIT_TRA_ACK_NOT_REC 0x20 +#define TWSI_M_TRAN_DATA_BYTE_ACK_REC 0x28 +#define TWSI_M_TRAN_DATA_BYTE_ACK_NOT_REC 0x30 +#define TWSI_M_LOST_ARB_DUR_AD_OR_DATA_TRA 0x38 +#define TWSI_AD_PLS_RD_BIT_TRA_ACK_REC 0x40 +#define TWSI_AD_PLS_RD_BIT_TRA_ACK_NOT_REC 0x48 +#define TWSI_M_REC_RD_DATA_ACK_TRA 0x50 +#define TWSI_M_REC_RD_DATA_ACK_NOT_TRA 0x58 +#define TWSI_SLA_REC_AD_PLS_WR_BIT_ACK_TRA 0x60 +#define TWSI_M_LOST_ARB_DUR_AD_TRA_AD_IS_TRGT_TO_SLA_ACK_TRA_W 0x68 +#define TWSI_GNL_CALL_REC_ACK_TRA 0x70 +#define TWSI_M_LOST_ARB_DUR_AD_TRA_GNL_CALL_AD_REC_ACK_TRA 0x78 +#define TWSI_SLA_REC_WR_DATA_AF_REC_SLA_AD_ACK_TRAN 0x80 +#define TWSI_SLA_REC_WR_DATA_AF_REC_SLA_AD_ACK_NOT_TRAN 0x88 +#define TWSI_SLA_REC_WR_DATA_AF_REC_GNL_CALL_ACK_TRAN 0x90 +#define TWSI_SLA_REC_WR_DATA_AF_REC_GNL_CALL_ACK_NOT_TRAN 0x98 +#define TWSI_SLA_REC_STOP_OR_REPEATED_STRT_CON 0xA0 +#define TWSI_SLA_REC_AD_PLS_RD_BIT_ACK_TRA 0xA8 +#define TWSI_M_LOST_ARB_DUR_AD_TRA_AD_IS_TRGT_TO_SLA_ACK_TRA_R 0xB0 +#define TWSI_SLA_TRA_RD_DATA_ACK_REC 0xB8 +#define TWSI_SLA_TRA_RD_DATA_ACK_NOT_REC 0xC0 +#define TWSI_SLA_TRA_LAST_RD_DATA_ACK_REC 0xC8 +#define TWSI_SEC_AD_PLS_WR_BIT_TRA_ACK_REC 0xD0 +#define TWSI_SEC_AD_PLS_WR_BIT_TRA_ACK_NOT_REC 0xD8 +#define TWSI_SEC_AD_PLS_RD_BIT_TRA_ACK_REC 0xE0 +#define TWSI_SEC_AD_PLS_RD_BIT_TRA_ACK_NOT_REC 0xE8 +#define TWSI_NO_REL_STS_INT_FLAG_IS_KEPT_0 0xF8 + + +#ifdef __cplusplus +} +#endif /* __cplusplus */ + +#endif /* __INCmvTwsiSpech */ diff --git a/target/linux/generic-2.4/files/crypto/ocf/ocf-bench.c b/target/linux/generic-2.4/files/crypto/ocf/ocf-bench.c new file mode 100644 index 0000000000..d32523185f --- /dev/null +++ b/target/linux/generic-2.4/files/crypto/ocf/ocf-bench.c @@ -0,0 +1,436 @@ +/* + * A loadable module that benchmarks the OCF crypto speed from kernel space. + * + * Copyright (C) 2004-2010 David McCullough + * + * LICENSE TERMS + * + * The free distribution and use of this software in both source and binary + * form is allowed (with or without changes) provided that: + * + * 1. distributions of this source code include the above copyright + * notice, this list of conditions and the following disclaimer; + * + * 2. distributions in binary form include the above copyright + * notice, this list of conditions and the following disclaimer + * in the documentation and/or other associated materials; + * + * 3. the copyright holder's name is not used to endorse products + * built using this software without specific written permission. + * + * ALTERNATIVELY, provided that this notice is retained in full, this product + * may be distributed under the terms of the GNU General Public License (GPL), + * in which case the provisions of the GPL apply INSTEAD OF those given above. + * + * DISCLAIMER + * + * This software is provided 'as is' with no explicit or implied warranties + * in respect of its properties, including, but not limited to, correctness + * and/or fitness for purpose. + */ + + +#ifndef AUTOCONF_INCLUDED +#include +#endif +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#ifdef I_HAVE_AN_XSCALE_WITH_INTEL_SDK +#define BENCH_IXP_ACCESS_LIB 1 +#endif +#ifdef BENCH_IXP_ACCESS_LIB +#include +#include +#include +#include +#include +#include +#include +#endif + +/* + * support for access lib version 1.4 + */ +#ifndef IX_MBUF_PRIV +#define IX_MBUF_PRIV(x) ((x)->priv) +#endif + +/* + * the number of simultaneously active requests + */ +static int request_q_len = 20; +module_param(request_q_len, int, 0); +MODULE_PARM_DESC(request_q_len, "Number of outstanding requests"); +/* + * how many requests we want to have processed + */ +static int request_num = 1024; +module_param(request_num, int, 0); +MODULE_PARM_DESC(request_num, "run for at least this many requests"); +/* + * the size of each request + */ +static int request_size = 1500; +module_param(request_size, int, 0); +MODULE_PARM_DESC(request_size, "size of each request"); + +/* + * a structure for each request + */ +typedef struct { + struct work_struct work; +#ifdef BENCH_IXP_ACCESS_LIB + IX_MBUF mbuf; +#endif + unsigned char *buffer; +} request_t; + +static request_t *requests; + +static int outstanding; +static int total; + +/*************************************************************************/ +/* + * OCF benchmark routines + */ + +static uint64_t ocf_cryptoid; +static int ocf_init(void); +static int ocf_cb(struct cryptop *crp); +static void ocf_request(void *arg); +#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20) +static void ocf_request_wq(struct work_struct *work); +#endif + +static int +ocf_init(void) +{ + int error; + struct cryptoini crie, cria; + struct cryptodesc crda, crde; + + memset(&crie, 0, sizeof(crie)); + memset(&cria, 0, sizeof(cria)); + memset(&crde, 0, sizeof(crde)); + memset(&crda, 0, sizeof(crda)); + + cria.cri_alg = CRYPTO_SHA1_HMAC; + cria.cri_klen = 20 * 8; + cria.cri_key = "0123456789abcdefghij"; + + crie.cri_alg = CRYPTO_3DES_CBC; + crie.cri_klen = 24 * 8; + crie.cri_key = "0123456789abcdefghijklmn"; + + crie.cri_next = &cria; + + error = crypto_newsession(&ocf_cryptoid, &crie, 0); + if (error) { + printk("crypto_newsession failed %d\n", error); + return -1; + } + return 0; +} + +static int +ocf_cb(struct cryptop *crp) +{ + request_t *r = (request_t *) crp->crp_opaque; + + if (crp->crp_etype) + printk("Error in OCF processing: %d\n", crp->crp_etype); + total++; + crypto_freereq(crp); + crp = NULL; + + if (total > request_num) { + outstanding--; + return 0; + } + +#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20) + INIT_WORK(&r->work, ocf_request_wq); +#else + INIT_WORK(&r->work, ocf_request, r); +#endif + schedule_work(&r->work); + return 0; +} + + +static void +ocf_request(void *arg) +{ + request_t *r = arg; + struct cryptop *crp = crypto_getreq(2); + struct cryptodesc *crde, *crda; + + if (!crp) { + outstanding--; + return; + } + + crde = crp->crp_desc; + crda = crde->crd_next; + + crda->crd_skip = 0; + crda->crd_flags = 0; + crda->crd_len = request_size; + crda->crd_inject = request_size; + crda->crd_alg = CRYPTO_SHA1_HMAC; + crda->crd_key = "0123456789abcdefghij"; + crda->crd_klen = 20 * 8; + + crde->crd_skip = 0; + crde->crd_flags = CRD_F_IV_EXPLICIT | CRD_F_ENCRYPT; + crde->crd_len = request_size; + crde->crd_inject = request_size; + crde->crd_alg = CRYPTO_3DES_CBC; + crde->crd_key = "0123456789abcdefghijklmn"; + crde->crd_klen = 24 * 8; + + crp->crp_ilen = request_size + 64; + crp->crp_flags = CRYPTO_F_CBIMM; + crp->crp_buf = (caddr_t) r->buffer; + crp->crp_callback = ocf_cb; + crp->crp_sid = ocf_cryptoid; + crp->crp_opaque = (caddr_t) r; + crypto_dispatch(crp); +} + +#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20) +static void +ocf_request_wq(struct work_struct *work) +{ + request_t *r = container_of(work, request_t, work); + ocf_request(r); +} +#endif + +/*************************************************************************/ +#ifdef BENCH_IXP_ACCESS_LIB +/*************************************************************************/ +/* + * CryptoAcc benchmark routines + */ + +static IxCryptoAccCtx ixp_ctx; +static UINT32 ixp_ctx_id; +static IX_MBUF ixp_pri; +static IX_MBUF ixp_sec; +static int ixp_registered = 0; + +static void ixp_register_cb(UINT32 ctx_id, IX_MBUF *bufp, + IxCryptoAccStatus status); +static void ixp_perform_cb(UINT32 ctx_id, IX_MBUF *sbufp, IX_MBUF *dbufp, + IxCryptoAccStatus status); +static void ixp_request(void *arg); +#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20) +static void ixp_request_wq(struct work_struct *work); +#endif + +static int +ixp_init(void) +{ + IxCryptoAccStatus status; + + ixp_ctx.cipherCtx.cipherAlgo = IX_CRYPTO_ACC_CIPHER_3DES; + ixp_ctx.cipherCtx.cipherMode = IX_CRYPTO_ACC_MODE_CBC; + ixp_ctx.cipherCtx.cipherKeyLen = 24; + ixp_ctx.cipherCtx.cipherBlockLen = IX_CRYPTO_ACC_DES_BLOCK_64; + ixp_ctx.cipherCtx.cipherInitialVectorLen = IX_CRYPTO_ACC_DES_IV_64; + memcpy(ixp_ctx.cipherCtx.key.cipherKey, "0123456789abcdefghijklmn", 24); + + ixp_ctx.authCtx.authAlgo = IX_CRYPTO_ACC_AUTH_SHA1; + ixp_ctx.authCtx.authDigestLen = 12; + ixp_ctx.authCtx.aadLen = 0; + ixp_ctx.authCtx.authKeyLen = 20; + memcpy(ixp_ctx.authCtx.key.authKey, "0123456789abcdefghij", 20); + + ixp_ctx.useDifferentSrcAndDestMbufs = 0; + ixp_ctx.operation = IX_CRYPTO_ACC_OP_ENCRYPT_AUTH ; + + IX_MBUF_MLEN(&ixp_pri) = IX_MBUF_PKT_LEN(&ixp_pri) = 128; + IX_MBUF_MDATA(&ixp_pri) = (unsigned char *) kmalloc(128, SLAB_ATOMIC); + IX_MBUF_MLEN(&ixp_sec) = IX_MBUF_PKT_LEN(&ixp_sec) = 128; + IX_MBUF_MDATA(&ixp_sec) = (unsigned char *) kmalloc(128, SLAB_ATOMIC); + + status = ixCryptoAccCtxRegister(&ixp_ctx, &ixp_pri, &ixp_sec, + ixp_register_cb, ixp_perform_cb, &ixp_ctx_id); + + if (IX_CRYPTO_ACC_STATUS_SUCCESS == status) { + while (!ixp_registered) + schedule(); + return ixp_registered < 0 ? -1 : 0; + } + + printk("ixp: ixCryptoAccCtxRegister failed %d\n", status); + return -1; +} + +static void +ixp_register_cb(UINT32 ctx_id, IX_MBUF *bufp, IxCryptoAccStatus status) +{ + if (bufp) { + IX_MBUF_MLEN(bufp) = IX_MBUF_PKT_LEN(bufp) = 0; + kfree(IX_MBUF_MDATA(bufp)); + IX_MBUF_MDATA(bufp) = NULL; + } + + if (IX_CRYPTO_ACC_STATUS_WAIT == status) + return; + if (IX_CRYPTO_ACC_STATUS_SUCCESS == status) + ixp_registered = 1; + else + ixp_registered = -1; +} + +static void +ixp_perform_cb( + UINT32 ctx_id, + IX_MBUF *sbufp, + IX_MBUF *dbufp, + IxCryptoAccStatus status) +{ + request_t *r = NULL; + + total++; + if (total > request_num) { + outstanding--; + return; + } + + if (!sbufp || !(r = IX_MBUF_PRIV(sbufp))) { + printk("crappo %p %p\n", sbufp, r); + outstanding--; + return; + } + +#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20) + INIT_WORK(&r->work, ixp_request_wq); +#else + INIT_WORK(&r->work, ixp_request, r); +#endif + schedule_work(&r->work); +} + +static void +ixp_request(void *arg) +{ + request_t *r = arg; + IxCryptoAccStatus status; + + memset(&r->mbuf, 0, sizeof(r->mbuf)); + IX_MBUF_MLEN(&r->mbuf) = IX_MBUF_PKT_LEN(&r->mbuf) = request_size + 64; + IX_MBUF_MDATA(&r->mbuf) = r->buffer; + IX_MBUF_PRIV(&r->mbuf) = r; + status = ixCryptoAccAuthCryptPerform(ixp_ctx_id, &r->mbuf, NULL, + 0, request_size, 0, request_size, request_size, r->buffer); + if (IX_CRYPTO_ACC_STATUS_SUCCESS != status) { + printk("status1 = %d\n", status); + outstanding--; + return; + } + return; +} + +#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20) +static void +ixp_request_wq(struct work_struct *work) +{ + request_t *r = container_of(work, request_t, work); + ixp_request(r); +} +#endif + +/*************************************************************************/ +#endif /* BENCH_IXP_ACCESS_LIB */ +/*************************************************************************/ + +int +ocfbench_init(void) +{ + int i, jstart, jstop; + + printk("Crypto Speed tests\n"); + + requests = kmalloc(sizeof(request_t) * request_q_len, GFP_KERNEL); + if (!requests) { + printk("malloc failed\n"); + return -EINVAL; + } + + for (i = 0; i < request_q_len; i++) { + /* +64 for return data */ + requests[i].buffer = kmalloc(request_size + 128, GFP_DMA); + if (!requests[i].buffer) { + printk("malloc failed\n"); + return -EINVAL; + } + memset(requests[i].buffer, '0' + i, request_size + 128); + } + + /* + * OCF benchmark + */ + printk("OCF: testing ...\n"); + ocf_init(); + total = outstanding = 0; + jstart = jiffies; + for (i = 0; i < request_q_len; i++) { + outstanding++; + ocf_request(&requests[i]); + } + while (outstanding > 0) + schedule(); + jstop = jiffies; + + printk("OCF: %d requests of %d bytes in %d jiffies\n", total, request_size, + jstop - jstart); + +#ifdef BENCH_IXP_ACCESS_LIB + /* + * IXP benchmark + */ + printk("IXP: testing ...\n"); + ixp_init(); + total = outstanding = 0; + jstart = jiffies; + for (i = 0; i < request_q_len; i++) { + outstanding++; + ixp_request(&requests[i]); + } + while (outstanding > 0) + schedule(); + jstop = jiffies; + + printk("IXP: %d requests of %d bytes in %d jiffies\n", total, request_size, + jstop - jstart); +#endif /* BENCH_IXP_ACCESS_LIB */ + + for (i = 0; i < request_q_len; i++) + kfree(requests[i].buffer); + kfree(requests); + return -EINVAL; /* always fail to load so it can be re-run quickly ;-) */ +} + +static void __exit ocfbench_exit(void) +{ +} + +module_init(ocfbench_init); +module_exit(ocfbench_exit); + +MODULE_LICENSE("BSD"); +MODULE_AUTHOR("David McCullough "); +MODULE_DESCRIPTION("Benchmark various in-kernel crypto speeds"); diff --git a/target/linux/generic-2.4/files/crypto/ocf/ocf-compat.h b/target/linux/generic-2.4/files/crypto/ocf/ocf-compat.h new file mode 100644 index 0000000000..212f971239 --- /dev/null +++ b/target/linux/generic-2.4/files/crypto/ocf/ocf-compat.h @@ -0,0 +1,294 @@ +#ifndef _BSD_COMPAT_H_ +#define _BSD_COMPAT_H_ 1 +/****************************************************************************/ +/* + * Provide compat routines for older linux kernels and BSD kernels + * + * Written by David McCullough + * Copyright (C) 2010 David McCullough + * + * LICENSE TERMS + * + * The free distribution and use of this software in both source and binary + * form is allowed (with or without changes) provided that: + * + * 1. distributions of this source code include the above copyright + * notice, this list of conditions and the following disclaimer; + * + * 2. distributions in binary form include the above copyright + * notice, this list of conditions and the following disclaimer + * in the documentation and/or other associated materials; + * + * 3. the copyright holder's name is not used to endorse products + * built using this software without specific written permission. + * + * ALTERNATIVELY, provided that this notice is retained in full, this file + * may be distributed under the terms of the GNU General Public License (GPL), + * in which case the provisions of the GPL apply INSTEAD OF those given above. + * + * DISCLAIMER + * + * This software is provided 'as is' with no explicit or implied warranties + * in respect of its properties, including, but not limited to, correctness + * and/or fitness for purpose. + */ +/****************************************************************************/ +#ifdef __KERNEL__ +/* + * fake some BSD driver interface stuff specifically for OCF use + */ + +typedef struct ocf_device *device_t; + +typedef struct { + int (*cryptodev_newsession)(device_t dev, u_int32_t *sidp, struct cryptoini *cri); + int (*cryptodev_freesession)(device_t dev, u_int64_t tid); + int (*cryptodev_process)(device_t dev, struct cryptop *crp, int hint); + int (*cryptodev_kprocess)(device_t dev, struct cryptkop *krp, int hint); +} device_method_t; +#define DEVMETHOD(id, func) id: func + +struct ocf_device { + char name[32]; /* the driver name */ + char nameunit[32]; /* the driver name + HW instance */ + int unit; + device_method_t methods; + void *softc; +}; + +#define CRYPTODEV_NEWSESSION(dev, sid, cri) \ + ((*(dev)->methods.cryptodev_newsession)(dev,sid,cri)) +#define CRYPTODEV_FREESESSION(dev, sid) \ + ((*(dev)->methods.cryptodev_freesession)(dev, sid)) +#define CRYPTODEV_PROCESS(dev, crp, hint) \ + ((*(dev)->methods.cryptodev_process)(dev, crp, hint)) +#define CRYPTODEV_KPROCESS(dev, krp, hint) \ + ((*(dev)->methods.cryptodev_kprocess)(dev, krp, hint)) + +#define device_get_name(dev) ((dev)->name) +#define device_get_nameunit(dev) ((dev)->nameunit) +#define device_get_unit(dev) ((dev)->unit) +#define device_get_softc(dev) ((dev)->softc) + +#define softc_device_decl \ + struct ocf_device _device; \ + device_t + +#define softc_device_init(_sc, _name, _unit, _methods) \ + if (1) {\ + strncpy((_sc)->_device.name, _name, sizeof((_sc)->_device.name) - 1); \ + snprintf((_sc)->_device.nameunit, sizeof((_sc)->_device.name), "%s%d", _name, _unit); \ + (_sc)->_device.unit = _unit; \ + (_sc)->_device.methods = _methods; \ + (_sc)->_device.softc = (void *) _sc; \ + *(device_t *)((softc_get_device(_sc))+1) = &(_sc)->_device; \ + } else + +#define softc_get_device(_sc) (&(_sc)->_device) + +/* + * iomem support for 2.4 and 2.6 kernels + */ +#include +#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,0) +#define ocf_iomem_t unsigned long + +/* + * implement simple workqueue like support for older kernels + */ + +#include + +#define work_struct tq_struct + +#define INIT_WORK(wp, fp, ap) \ + do { \ + (wp)->sync = 0; \ + (wp)->routine = (fp); \ + (wp)->data = (ap); \ + } while (0) + +#define schedule_work(wp) \ + do { \ + queue_task((wp), &tq_immediate); \ + mark_bh(IMMEDIATE_BH); \ + } while (0) + +#define flush_scheduled_work() run_task_queue(&tq_immediate) + +#else +#define ocf_iomem_t void __iomem * + +#include + +#endif + +#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,26) +#include +#elif LINUX_VERSION_CODE < KERNEL_VERSION(2,6,11) +#define files_fdtable(files) (files) +#endif + +#ifdef MODULE_PARM +#undef module_param /* just in case */ +#define module_param(a,b,c) MODULE_PARM(a,"i") +#endif + +#define bzero(s,l) memset(s,0,l) +#define bcopy(s,d,l) memcpy(d,s,l) +#define bcmp(x, y, l) memcmp(x,y,l) + +#define MIN(x,y) ((x) < (y) ? (x) : (y)) + +#define device_printf(dev, a...) ({ \ + printk("%s: ", device_get_nameunit(dev)); printk(a); \ + }) + +#undef printf +#define printf(fmt...) printk(fmt) + +#define KASSERT(c,p) if (!(c)) { printk p ; } else + +#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,0) +#define ocf_daemonize(str) \ + daemonize(); \ + spin_lock_irq(¤t->sigmask_lock); \ + sigemptyset(¤t->blocked); \ + recalc_sigpending(current); \ + spin_unlock_irq(¤t->sigmask_lock); \ + sprintf(current->comm, str); +#else +#define ocf_daemonize(str) daemonize(str); +#endif + +#define TAILQ_INSERT_TAIL(q,d,m) list_add_tail(&(d)->m, (q)) +#define TAILQ_EMPTY(q) list_empty(q) +#define TAILQ_FOREACH(v, q, m) list_for_each_entry(v, q, m) + +#define read_random(p,l) get_random_bytes(p,l) + +#define DELAY(x) ((x) > 2000 ? mdelay((x)/1000) : udelay(x)) +#define strtoul simple_strtoul + +#define pci_get_vendor(dev) ((dev)->vendor) +#define pci_get_device(dev) ((dev)->device) + +#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,0) +#define pci_set_consistent_dma_mask(dev, mask) (0) +#endif +#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,10) +#define pci_dma_sync_single_for_cpu pci_dma_sync_single +#endif + +#ifndef DMA_32BIT_MASK +#define DMA_32BIT_MASK 0x00000000ffffffffULL +#endif + +#ifndef htole32 +#define htole32(x) cpu_to_le32(x) +#endif +#ifndef htobe32 +#define htobe32(x) cpu_to_be32(x) +#endif +#ifndef htole16 +#define htole16(x) cpu_to_le16(x) +#endif +#ifndef htobe16 +#define htobe16(x) cpu_to_be16(x) +#endif + +/* older kernels don't have these */ + +#include +#if !defined(IRQ_NONE) && !defined(IRQ_RETVAL) +#define IRQ_NONE +#define IRQ_HANDLED +#define IRQ_WAKE_THREAD +#define IRQ_RETVAL +#define irqreturn_t void +typedef irqreturn_t (*irq_handler_t)(int irq, void *arg, struct pt_regs *regs); +#endif +#ifndef IRQF_SHARED +#define IRQF_SHARED SA_SHIRQ +#endif + +#if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0) +# define strlcpy(dest,src,len) \ + ({strncpy(dest,src,(len)-1); ((char *)dest)[(len)-1] = '\0'; }) +#endif + +#ifndef MAX_ERRNO +#define MAX_ERRNO 4095 +#endif +#ifndef IS_ERR_VALUE +#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,5) +#include +#endif +#ifndef IS_ERR_VALUE +#define IS_ERR_VALUE(x) ((unsigned long)(x) >= (unsigned long)-MAX_ERRNO) +#endif +#endif + +/* + * common debug for all + */ +#if 1 +#define dprintk(a...) do { if (debug) printk(a); } while(0) +#else +#define dprintk(a...) +#endif + +#ifndef SLAB_ATOMIC +/* Changed in 2.6.20, must use GFP_ATOMIC now */ +#define SLAB_ATOMIC GFP_ATOMIC +#endif + +/* + * need some additional support for older kernels */ +#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,2) +#define pci_register_driver_compat(driver, rc) \ + do { \ + if ((rc) > 0) { \ + (rc) = 0; \ + } else if (rc == 0) { \ + (rc) = -ENODEV; \ + } else { \ + pci_unregister_driver(driver); \ + } \ + } while (0) +#elif LINUX_VERSION_CODE < KERNEL_VERSION(2,6,10) +#define pci_register_driver_compat(driver,rc) ((rc) = (rc) < 0 ? (rc) : 0) +#else +#define pci_register_driver_compat(driver,rc) +#endif + +#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,24) + +#include +#include + +static inline void sg_set_page(struct scatterlist *sg, struct page *page, + unsigned int len, unsigned int offset) +{ + sg->page = page; + sg->offset = offset; + sg->length = len; +} + +static inline void *sg_virt(struct scatterlist *sg) +{ + return page_address(sg->page) + sg->offset; +} + +#define sg_init_table(sg, n) + +#endif + +#ifndef late_initcall +#define late_initcall(init) module_init(init) +#endif + +#endif /* __KERNEL__ */ + +/****************************************************************************/ +#endif /* _BSD_COMPAT_H_ */ diff --git a/target/linux/generic-2.4/files/crypto/ocf/ocfnull/Makefile b/target/linux/generic-2.4/files/crypto/ocf/ocfnull/Makefile new file mode 100644 index 0000000000..044bcacb7b --- /dev/null +++ b/target/linux/generic-2.4/files/crypto/ocf/ocfnull/Makefile @@ -0,0 +1,12 @@ +# for SGlinux builds +-include $(ROOTDIR)/modules/.config + +obj-$(CONFIG_OCF_OCFNULL) += ocfnull.o + +obj ?= . +EXTRA_CFLAGS += -I$(obj)/.. + +ifdef TOPDIR +-include $(TOPDIR)/Rules.make +endif + diff --git a/target/linux/generic-2.4/files/crypto/ocf/ocfnull/ocfnull.c b/target/linux/generic-2.4/files/crypto/ocf/ocfnull/ocfnull.c new file mode 100644 index 0000000000..a6b76cdaef --- /dev/null +++ b/target/linux/generic-2.4/files/crypto/ocf/ocfnull/ocfnull.c @@ -0,0 +1,203 @@ +/* + * An OCF module for determining the cost of crypto versus the cost of + * IPSec processing outside of OCF. This modules gives us the effect of + * zero cost encryption, of course you will need to run it at both ends + * since it does no crypto at all. + * + * Written by David McCullough + * Copyright (C) 2006-2010 David McCullough + * + * LICENSE TERMS + * + * The free distribution and use of this software in both source and binary + * form is allowed (with or without changes) provided that: + * + * 1. distributions of this source code include the above copyright + * notice, this list of conditions and the following disclaimer; + * + * 2. distributions in binary form include the above copyright + * notice, this list of conditions and the following disclaimer + * in the documentation and/or other associated materials; + * + * 3. the copyright holder's name is not used to endorse products + * built using this software without specific written permission. + * + * ALTERNATIVELY, provided that this notice is retained in full, this product + * may be distributed under the terms of the GNU General Public License (GPL), + * in which case the provisions of the GPL apply INSTEAD OF those given above. + * + * DISCLAIMER + * + * This software is provided 'as is' with no explicit or implied warranties + * in respect of its properties, including, but not limited to, correctness + * and/or fitness for purpose. + */ + +#ifndef AUTOCONF_INCLUDED +#include +#endif +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include + +static int32_t null_id = -1; +static u_int32_t null_sesnum = 0; + +static int null_process(device_t, struct cryptop *, int); +static int null_newsession(device_t, u_int32_t *, struct cryptoini *); +static int null_freesession(device_t, u_int64_t); + +#define debug ocfnull_debug +int ocfnull_debug = 0; +module_param(ocfnull_debug, int, 0644); +MODULE_PARM_DESC(ocfnull_debug, "Enable debug"); + +/* + * dummy device structure + */ + +static struct { + softc_device_decl sc_dev; +} nulldev; + +static device_method_t null_methods = { + /* crypto device methods */ + DEVMETHOD(cryptodev_newsession, null_newsession), + DEVMETHOD(cryptodev_freesession,null_freesession), + DEVMETHOD(cryptodev_process, null_process), +}; + +/* + * Generate a new software session. + */ +static int +null_newsession(device_t arg, u_int32_t *sid, struct cryptoini *cri) +{ + dprintk("%s()\n", __FUNCTION__); + if (sid == NULL || cri == NULL) { + dprintk("%s,%d - EINVAL\n", __FILE__, __LINE__); + return EINVAL; + } + + if (null_sesnum == 0) + null_sesnum++; + *sid = null_sesnum++; + return 0; +} + + +/* + * Free a session. + */ +static int +null_freesession(device_t arg, u_int64_t tid) +{ + u_int32_t sid = CRYPTO_SESID2LID(tid); + + dprintk("%s()\n", __FUNCTION__); + if (sid > null_sesnum) { + dprintk("%s,%d: EINVAL\n", __FILE__, __LINE__); + return EINVAL; + } + + /* Silently accept and return */ + if (sid == 0) + return 0; + return 0; +} + + +/* + * Process a request. + */ +static int +null_process(device_t arg, struct cryptop *crp, int hint) +{ + unsigned int lid; + + dprintk("%s()\n", __FUNCTION__); + + /* Sanity check */ + if (crp == NULL) { + dprintk("%s,%d: EINVAL\n", __FILE__, __LINE__); + return EINVAL; + } + + crp->crp_etype = 0; + + if (crp->crp_desc == NULL || crp->crp_buf == NULL) { + dprintk("%s,%d: EINVAL\n", __FILE__, __LINE__); + crp->crp_etype = EINVAL; + goto done; + } + + /* + * find the session we are using + */ + + lid = crp->crp_sid & 0xffffffff; + if (lid >= null_sesnum || lid == 0) { + crp->crp_etype = ENOENT; + dprintk("%s,%d: ENOENT\n", __FILE__, __LINE__); + goto done; + } + +done: + crypto_done(crp); + return 0; +} + + +/* + * our driver startup and shutdown routines + */ + +static int +null_init(void) +{ + dprintk("%s(%p)\n", __FUNCTION__, null_init); + + memset(&nulldev, 0, sizeof(nulldev)); + softc_device_init(&nulldev, "ocfnull", 0, null_methods); + + null_id = crypto_get_driverid(softc_get_device(&nulldev), + CRYPTOCAP_F_HARDWARE); + if (null_id < 0) + panic("ocfnull: crypto device cannot initialize!"); + +#define REGISTER(alg) \ + crypto_register(null_id,alg,0,0) + REGISTER(CRYPTO_DES_CBC); + REGISTER(CRYPTO_3DES_CBC); + REGISTER(CRYPTO_RIJNDAEL128_CBC); + REGISTER(CRYPTO_MD5); + REGISTER(CRYPTO_SHA1); + REGISTER(CRYPTO_MD5_HMAC); + REGISTER(CRYPTO_SHA1_HMAC); +#undef REGISTER + + return 0; +} + +static void +null_exit(void) +{ + dprintk("%s()\n", __FUNCTION__); + crypto_unregister_all(null_id); + null_id = -1; +} + +module_init(null_init); +module_exit(null_exit); + +MODULE_LICENSE("Dual BSD/GPL"); +MODULE_AUTHOR("David McCullough "); +MODULE_DESCRIPTION("ocfnull - claims a lot but does nothing"); diff --git a/target/linux/generic-2.4/files/crypto/ocf/pasemi/Makefile b/target/linux/generic-2.4/files/crypto/ocf/pasemi/Makefile new file mode 100644 index 0000000000..b0a3980f21 --- /dev/null +++ b/target/linux/generic-2.4/files/crypto/ocf/pasemi/Makefile @@ -0,0 +1,12 @@ +# for SGlinux builds +-include $(ROOTDIR)/modules/.config + +obj-$(CONFIG_OCF_PASEMI) += pasemi.o + +obj ?= . +EXTRA_CFLAGS += -I$(obj)/.. -I$(obj)/ + +ifdef TOPDIR +-include $(TOPDIR)/Rules.make +endif + diff --git a/target/linux/generic-2.4/files/crypto/ocf/pasemi/pasemi.c b/target/linux/generic-2.4/files/crypto/ocf/pasemi/pasemi.c new file mode 100644 index 0000000000..c3bb9313d3 --- /dev/null +++ b/target/linux/generic-2.4/files/crypto/ocf/pasemi/pasemi.c @@ -0,0 +1,1009 @@ +/* + * Copyright (C) 2007 PA Semi, Inc + * + * Driver for the PA Semi PWRficient DMA Crypto Engine + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#ifndef AUTOCONF_INCLUDED +#include +#endif +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include "pasemi_fnu.h" + +#define DRV_NAME "pasemi" + +#define TIMER_INTERVAL 1000 + +static void __devexit pasemi_dma_remove(struct pci_dev *pdev); +static struct pasdma_status volatile * dma_status; + +static int debug; +module_param(debug, int, 0644); +MODULE_PARM_DESC(debug, "Enable debug"); + +static void pasemi_desc_start(struct pasemi_desc *desc, u64 hdr) +{ + desc->postop = 0; + desc->quad[0] = hdr; + desc->quad_cnt = 1; + desc->size = 1; +} + +static void pasemi_desc_build(struct pasemi_desc *desc, u64 val) +{ + desc->quad[desc->quad_cnt++] = val; + desc->size = (desc->quad_cnt + 1) / 2; +} + +static void pasemi_desc_hdr(struct pasemi_desc *desc, u64 hdr) +{ + desc->quad[0] |= hdr; +} + +static int pasemi_desc_size(struct pasemi_desc *desc) +{ + return desc->size; +} + +static void pasemi_ring_add_desc( + struct pasemi_fnu_txring *ring, + struct pasemi_desc *desc, + struct cryptop *crp) { + int i; + int ring_index = 2 * (ring->next_to_fill & (TX_RING_SIZE-1)); + + TX_DESC_INFO(ring, ring->next_to_fill).desc_size = desc->size; + TX_DESC_INFO(ring, ring->next_to_fill).desc_postop = desc->postop; + TX_DESC_INFO(ring, ring->next_to_fill).cf_crp = crp; + + for (i = 0; i < desc->quad_cnt; i += 2) { + ring_index = 2 * (ring->next_to_fill & (TX_RING_SIZE-1)); + ring->desc[ring_index] = desc->quad[i]; + ring->desc[ring_index + 1] = desc->quad[i + 1]; + ring->next_to_fill++; + } + + if (desc->quad_cnt & 1) + ring->desc[ring_index + 1] = 0; +} + +static void pasemi_ring_incr(struct pasemi_softc *sc, int chan_index, int incr) +{ + out_le32(sc->dma_regs + PAS_DMA_TXCHAN_INCR(sc->base_chan + chan_index), + incr); +} + +/* + * Generate a new software session. + */ +static int +pasemi_newsession(device_t dev, u_int32_t *sidp, struct cryptoini *cri) +{ + struct cryptoini *c, *encini = NULL, *macini = NULL; + struct pasemi_softc *sc = device_get_softc(dev); + struct pasemi_session *ses = NULL, **sespp; + int sesn, blksz = 0; + u64 ccmd = 0; + unsigned long flags; + struct pasemi_desc init_desc; + struct pasemi_fnu_txring *txring; + + DPRINTF("%s()\n", __FUNCTION__); + if (sidp == NULL || cri == NULL || sc == NULL) { + DPRINTF("%s,%d - EINVAL\n", __FILE__, __LINE__); + return -EINVAL; + } + for (c = cri; c != NULL; c = c->cri_next) { + if (ALG_IS_SIG(c->cri_alg)) { + if (macini) + return -EINVAL; + macini = c; + } else if (ALG_IS_CIPHER(c->cri_alg)) { + if (encini) + return -EINVAL; + encini = c; + } else { + DPRINTF("UNKNOWN c->cri_alg %d\n", c->cri_alg); + return -EINVAL; + } + } + if (encini == NULL && macini == NULL) + return -EINVAL; + if (encini) { + /* validate key length */ + switch (encini->cri_alg) { + case CRYPTO_DES_CBC: + if (encini->cri_klen != 64) + return -EINVAL; + ccmd = DMA_CALGO_DES; + break; + case CRYPTO_3DES_CBC: + if (encini->cri_klen != 192) + return -EINVAL; + ccmd = DMA_CALGO_3DES; + break; + case CRYPTO_AES_CBC: + if (encini->cri_klen != 128 && + encini->cri_klen != 192 && + encini->cri_klen != 256) + return -EINVAL; + ccmd = DMA_CALGO_AES; + break; + case CRYPTO_ARC4: + if (encini->cri_klen != 128) + return -EINVAL; + ccmd = DMA_CALGO_ARC; + break; + default: + DPRINTF("UNKNOWN encini->cri_alg %d\n", + encini->cri_alg); + return -EINVAL; + } + } + + if (macini) { + switch (macini->cri_alg) { + case CRYPTO_MD5: + case CRYPTO_MD5_HMAC: + blksz = 16; + break; + case CRYPTO_SHA1: + case CRYPTO_SHA1_HMAC: + blksz = 20; + break; + default: + DPRINTF("UNKNOWN macini->cri_alg %d\n", + macini->cri_alg); + return -EINVAL; + } + if (((macini->cri_klen + 7) / 8) > blksz) { + DPRINTF("key length %d bigger than blksize %d not supported\n", + ((macini->cri_klen + 7) / 8), blksz); + return -EINVAL; + } + } + + for (sesn = 0; sesn < sc->sc_nsessions; sesn++) { + if (sc->sc_sessions[sesn] == NULL) { + sc->sc_sessions[sesn] = (struct pasemi_session *) + kzalloc(sizeof(struct pasemi_session), GFP_ATOMIC); + ses = sc->sc_sessions[sesn]; + break; + } else if (sc->sc_sessions[sesn]->used == 0) { + ses = sc->sc_sessions[sesn]; + break; + } + } + + if (ses == NULL) { + sespp = (struct pasemi_session **) + kzalloc(sc->sc_nsessions * 2 * + sizeof(struct pasemi_session *), GFP_ATOMIC); + if (sespp == NULL) + return -ENOMEM; + memcpy(sespp, sc->sc_sessions, + sc->sc_nsessions * sizeof(struct pasemi_session *)); + kfree(sc->sc_sessions); + sc->sc_sessions = sespp; + sesn = sc->sc_nsessions; + ses = sc->sc_sessions[sesn] = (struct pasemi_session *) + kzalloc(sizeof(struct pasemi_session), GFP_ATOMIC); + if (ses == NULL) + return -ENOMEM; + sc->sc_nsessions *= 2; + } + + ses->used = 1; + + ses->dma_addr = pci_map_single(sc->dma_pdev, (void *) ses->civ, + sizeof(struct pasemi_session), DMA_TO_DEVICE); + + /* enter the channel scheduler */ + spin_lock_irqsave(&sc->sc_chnlock, flags); + + /* ARC4 has to be processed by the even channel */ + if (encini && (encini->cri_alg == CRYPTO_ARC4)) + ses->chan = sc->sc_lastchn & ~1; + else + ses->chan = sc->sc_lastchn; + sc->sc_lastchn = (sc->sc_lastchn + 1) % sc->sc_num_channels; + + spin_unlock_irqrestore(&sc->sc_chnlock, flags); + + txring = &sc->tx[ses->chan]; + + if (encini) { + ses->ccmd = ccmd; + + /* get an IV */ + /* XXX may read fewer than requested */ + get_random_bytes(ses->civ, sizeof(ses->civ)); + + ses->keysz = (encini->cri_klen - 63) / 64; + memcpy(ses->key, encini->cri_key, (ses->keysz + 1) * 8); + + pasemi_desc_start(&init_desc, + XCT_CTRL_HDR(ses->chan, (encini && macini) ? 0x68 : 0x40, DMA_FN_CIV0)); + pasemi_desc_build(&init_desc, + XCT_FUN_SRC_PTR((encini && macini) ? 0x68 : 0x40, ses->dma_addr)); + } + if (macini) { + if (macini->cri_alg == CRYPTO_MD5_HMAC || + macini->cri_alg == CRYPTO_SHA1_HMAC) + memcpy(ses->hkey, macini->cri_key, blksz); + else { + /* Load initialization constants(RFC 1321, 3174) */ + ses->hiv[0] = 0x67452301efcdab89ULL; + ses->hiv[1] = 0x98badcfe10325476ULL; + ses->hiv[2] = 0xc3d2e1f000000000ULL; + } + ses->hseq = 0ULL; + } + + spin_lock_irqsave(&txring->fill_lock, flags); + + if (((txring->next_to_fill + pasemi_desc_size(&init_desc)) - + txring->next_to_clean) > TX_RING_SIZE) { + spin_unlock_irqrestore(&txring->fill_lock, flags); + return ERESTART; + } + + if (encini) { + pasemi_ring_add_desc(txring, &init_desc, NULL); + pasemi_ring_incr(sc, ses->chan, + pasemi_desc_size(&init_desc)); + } + + txring->sesn = sesn; + spin_unlock_irqrestore(&txring->fill_lock, flags); + + *sidp = PASEMI_SID(sesn); + return 0; +} + +/* + * Deallocate a session. + */ +static int +pasemi_freesession(device_t dev, u_int64_t tid) +{ + struct pasemi_softc *sc = device_get_softc(dev); + int session; + u_int32_t sid = ((u_int32_t) tid) & 0xffffffff; + + DPRINTF("%s()\n", __FUNCTION__); + + if (sc == NULL) + return -EINVAL; + session = PASEMI_SESSION(sid); + if (session >= sc->sc_nsessions || !sc->sc_sessions[session]) + return -EINVAL; + + pci_unmap_single(sc->dma_pdev, + sc->sc_sessions[session]->dma_addr, + sizeof(struct pasemi_session), DMA_TO_DEVICE); + memset(sc->sc_sessions[session], 0, + sizeof(struct pasemi_session)); + + return 0; +} + +static int +pasemi_process(device_t dev, struct cryptop *crp, int hint) +{ + + int err = 0, ivsize, srclen = 0, reinit = 0, reinit_size = 0, chsel; + struct pasemi_softc *sc = device_get_softc(dev); + struct cryptodesc *crd1, *crd2, *maccrd, *enccrd; + caddr_t ivp; + struct pasemi_desc init_desc, work_desc; + struct pasemi_session *ses; + struct sk_buff *skb; + struct uio *uiop; + unsigned long flags; + struct pasemi_fnu_txring *txring; + + DPRINTF("%s()\n", __FUNCTION__); + + if (crp == NULL || crp->crp_callback == NULL || sc == NULL) + return -EINVAL; + + crp->crp_etype = 0; + if (PASEMI_SESSION(crp->crp_sid) >= sc->sc_nsessions) + return -EINVAL; + + ses = sc->sc_sessions[PASEMI_SESSION(crp->crp_sid)]; + + crd1 = crp->crp_desc; + if (crd1 == NULL) { + err = -EINVAL; + goto errout; + } + crd2 = crd1->crd_next; + + if (ALG_IS_SIG(crd1->crd_alg)) { + maccrd = crd1; + if (crd2 == NULL) + enccrd = NULL; + else if (ALG_IS_CIPHER(crd2->crd_alg) && + (crd2->crd_flags & CRD_F_ENCRYPT) == 0) + enccrd = crd2; + else + goto erralg; + } else if (ALG_IS_CIPHER(crd1->crd_alg)) { + enccrd = crd1; + if (crd2 == NULL) + maccrd = NULL; + else if (ALG_IS_SIG(crd2->crd_alg) && + (crd1->crd_flags & CRD_F_ENCRYPT)) + maccrd = crd2; + else + goto erralg; + } else + goto erralg; + + chsel = ses->chan; + + txring = &sc->tx[chsel]; + + if (enccrd && !maccrd) { + if (enccrd->crd_alg == CRYPTO_ARC4) + reinit = 1; + reinit_size = 0x40; + srclen = crp->crp_ilen; + + pasemi_desc_start(&work_desc, XCT_FUN_O | XCT_FUN_I + | XCT_FUN_FUN(chsel)); + if (enccrd->crd_flags & CRD_F_ENCRYPT) + pasemi_desc_hdr(&work_desc, XCT_FUN_CRM_ENC); + else + pasemi_desc_hdr(&work_desc, XCT_FUN_CRM_DEC); + } else if (enccrd && maccrd) { + if (enccrd->crd_alg == CRYPTO_ARC4) + reinit = 1; + reinit_size = 0x68; + + if (enccrd->crd_flags & CRD_F_ENCRYPT) { + /* Encrypt -> Authenticate */ + pasemi_desc_start(&work_desc, XCT_FUN_O | XCT_FUN_I | XCT_FUN_CRM_ENC_SIG + | XCT_FUN_A | XCT_FUN_FUN(chsel)); + srclen = maccrd->crd_skip + maccrd->crd_len; + } else { + /* Authenticate -> Decrypt */ + pasemi_desc_start(&work_desc, XCT_FUN_O | XCT_FUN_I | XCT_FUN_CRM_SIG_DEC + | XCT_FUN_24BRES | XCT_FUN_FUN(chsel)); + pasemi_desc_build(&work_desc, 0); + pasemi_desc_build(&work_desc, 0); + pasemi_desc_build(&work_desc, 0); + work_desc.postop = PASEMI_CHECK_SIG; + srclen = crp->crp_ilen; + } + + pasemi_desc_hdr(&work_desc, XCT_FUN_SHL(maccrd->crd_skip / 4)); + pasemi_desc_hdr(&work_desc, XCT_FUN_CHL(enccrd->crd_skip - maccrd->crd_skip)); + } else if (!enccrd && maccrd) { + srclen = maccrd->crd_len; + + pasemi_desc_start(&init_desc, + XCT_CTRL_HDR(chsel, 0x58, DMA_FN_HKEY0)); + pasemi_desc_build(&init_desc, + XCT_FUN_SRC_PTR(0x58, ((struct pasemi_session *)ses->dma_addr)->hkey)); + + pasemi_desc_start(&work_desc, XCT_FUN_O | XCT_FUN_I | XCT_FUN_CRM_SIG + | XCT_FUN_A | XCT_FUN_FUN(chsel)); + } + + if (enccrd) { + switch (enccrd->crd_alg) { + case CRYPTO_3DES_CBC: + pasemi_desc_hdr(&work_desc, XCT_FUN_ALG_3DES | + XCT_FUN_BCM_CBC); + ivsize = sizeof(u64); + break; + case CRYPTO_DES_CBC: + pasemi_desc_hdr(&work_desc, XCT_FUN_ALG_DES | + XCT_FUN_BCM_CBC); + ivsize = sizeof(u64); + break; + case CRYPTO_AES_CBC: + pasemi_desc_hdr(&work_desc, XCT_FUN_ALG_AES | + XCT_FUN_BCM_CBC); + ivsize = 2 * sizeof(u64); + break; + case CRYPTO_ARC4: + pasemi_desc_hdr(&work_desc, XCT_FUN_ALG_ARC); + ivsize = 0; + break; + default: + printk(DRV_NAME ": unimplemented enccrd->crd_alg %d\n", + enccrd->crd_alg); + err = -EINVAL; + goto errout; + } + + ivp = (ivsize == sizeof(u64)) ? (caddr_t) &ses->civ[1] : (caddr_t) &ses->civ[0]; + if (enccrd->crd_flags & CRD_F_ENCRYPT) { + if (enccrd->crd_flags & CRD_F_IV_EXPLICIT) + memcpy(ivp, enccrd->crd_iv, ivsize); + /* If IV is not present in the buffer already, it has to be copied there */ + if ((enccrd->crd_flags & CRD_F_IV_PRESENT) == 0) + crypto_copyback(crp->crp_flags, crp->crp_buf, + enccrd->crd_inject, ivsize, ivp); + } else { + if (enccrd->crd_flags & CRD_F_IV_EXPLICIT) + /* IV is provided expicitly in descriptor */ + memcpy(ivp, enccrd->crd_iv, ivsize); + else + /* IV is provided in the packet */ + crypto_copydata(crp->crp_flags, crp->crp_buf, + enccrd->crd_inject, ivsize, + ivp); + } + } + + if (maccrd) { + switch (maccrd->crd_alg) { + case CRYPTO_MD5: + pasemi_desc_hdr(&work_desc, XCT_FUN_SIG_MD5 | + XCT_FUN_HSZ((crp->crp_ilen - maccrd->crd_inject) / 4)); + break; + case CRYPTO_SHA1: + pasemi_desc_hdr(&work_desc, XCT_FUN_SIG_SHA1 | + XCT_FUN_HSZ((crp->crp_ilen - maccrd->crd_inject) / 4)); + break; + case CRYPTO_MD5_HMAC: + pasemi_desc_hdr(&work_desc, XCT_FUN_SIG_HMAC_MD5 | + XCT_FUN_HSZ((crp->crp_ilen - maccrd->crd_inject) / 4)); + break; + case CRYPTO_SHA1_HMAC: + pasemi_desc_hdr(&work_desc, XCT_FUN_SIG_HMAC_SHA1 | + XCT_FUN_HSZ((crp->crp_ilen - maccrd->crd_inject) / 4)); + break; + default: + printk(DRV_NAME ": unimplemented maccrd->crd_alg %d\n", + maccrd->crd_alg); + err = -EINVAL; + goto errout; + } + } + + if (crp->crp_flags & CRYPTO_F_SKBUF) { + /* using SKB buffers */ + skb = (struct sk_buff *)crp->crp_buf; + if (skb_shinfo(skb)->nr_frags) { + printk(DRV_NAME ": skb frags unimplemented\n"); + err = -EINVAL; + goto errout; + } + pasemi_desc_build( + &work_desc, + XCT_FUN_DST_PTR(skb->len, pci_map_single( + sc->dma_pdev, skb->data, + skb->len, DMA_TO_DEVICE))); + pasemi_desc_build( + &work_desc, + XCT_FUN_SRC_PTR( + srclen, pci_map_single( + sc->dma_pdev, skb->data, + srclen, DMA_TO_DEVICE))); + pasemi_desc_hdr(&work_desc, XCT_FUN_LLEN(srclen)); + } else if (crp->crp_flags & CRYPTO_F_IOV) { + /* using IOV buffers */ + uiop = (struct uio *)crp->crp_buf; + if (uiop->uio_iovcnt > 1) { + printk(DRV_NAME ": iov frags unimplemented\n"); + err = -EINVAL; + goto errout; + } + + /* crp_olen is never set; always use crp_ilen */ + pasemi_desc_build( + &work_desc, + XCT_FUN_DST_PTR(crp->crp_ilen, pci_map_single( + sc->dma_pdev, + uiop->uio_iov->iov_base, + crp->crp_ilen, DMA_TO_DEVICE))); + pasemi_desc_hdr(&work_desc, XCT_FUN_LLEN(srclen)); + + pasemi_desc_build( + &work_desc, + XCT_FUN_SRC_PTR(srclen, pci_map_single( + sc->dma_pdev, + uiop->uio_iov->iov_base, + srclen, DMA_TO_DEVICE))); + } else { + /* using contig buffers */ + pasemi_desc_build( + &work_desc, + XCT_FUN_DST_PTR(crp->crp_ilen, pci_map_single( + sc->dma_pdev, + crp->crp_buf, + crp->crp_ilen, DMA_TO_DEVICE))); + pasemi_desc_build( + &work_desc, + XCT_FUN_SRC_PTR(srclen, pci_map_single( + sc->dma_pdev, + crp->crp_buf, srclen, + DMA_TO_DEVICE))); + pasemi_desc_hdr(&work_desc, XCT_FUN_LLEN(srclen)); + } + + spin_lock_irqsave(&txring->fill_lock, flags); + + if (txring->sesn != PASEMI_SESSION(crp->crp_sid)) { + txring->sesn = PASEMI_SESSION(crp->crp_sid); + reinit = 1; + } + + if (enccrd) { + pasemi_desc_start(&init_desc, + XCT_CTRL_HDR(chsel, reinit ? reinit_size : 0x10, DMA_FN_CIV0)); + pasemi_desc_build(&init_desc, + XCT_FUN_SRC_PTR(reinit ? reinit_size : 0x10, ses->dma_addr)); + } + + if (((txring->next_to_fill + pasemi_desc_size(&init_desc) + + pasemi_desc_size(&work_desc)) - + txring->next_to_clean) > TX_RING_SIZE) { + spin_unlock_irqrestore(&txring->fill_lock, flags); + err = ERESTART; + goto errout; + } + + pasemi_ring_add_desc(txring, &init_desc, NULL); + pasemi_ring_add_desc(txring, &work_desc, crp); + + pasemi_ring_incr(sc, chsel, + pasemi_desc_size(&init_desc) + + pasemi_desc_size(&work_desc)); + + spin_unlock_irqrestore(&txring->fill_lock, flags); + + mod_timer(&txring->crypto_timer, jiffies + TIMER_INTERVAL); + + return 0; + +erralg: + printk(DRV_NAME ": unsupported algorithm or algorithm order alg1 %d alg2 %d\n", + crd1->crd_alg, crd2->crd_alg); + err = -EINVAL; + +errout: + if (err != ERESTART) { + crp->crp_etype = err; + crypto_done(crp); + } + return err; +} + +static int pasemi_clean_tx(struct pasemi_softc *sc, int chan) +{ + int i, j, ring_idx; + struct pasemi_fnu_txring *ring = &sc->tx[chan]; + u16 delta_cnt; + int flags, loops = 10; + int desc_size; + struct cryptop *crp; + + spin_lock_irqsave(&ring->clean_lock, flags); + + while ((delta_cnt = (dma_status->tx_sta[sc->base_chan + chan] + & PAS_STATUS_PCNT_M) - ring->total_pktcnt) + && loops--) { + + for (i = 0; i < delta_cnt; i++) { + desc_size = TX_DESC_INFO(ring, ring->next_to_clean).desc_size; + crp = TX_DESC_INFO(ring, ring->next_to_clean).cf_crp; + if (crp) { + ring_idx = 2 * (ring->next_to_clean & (TX_RING_SIZE-1)); + if (TX_DESC_INFO(ring, ring->next_to_clean).desc_postop & PASEMI_CHECK_SIG) { + /* Need to make sure signature matched, + * if not - return error */ + if (!(ring->desc[ring_idx + 1] & (1ULL << 63))) + crp->crp_etype = -EINVAL; + } + crypto_done(TX_DESC_INFO(ring, + ring->next_to_clean).cf_crp); + TX_DESC_INFO(ring, ring->next_to_clean).cf_crp = NULL; + pci_unmap_single( + sc->dma_pdev, + XCT_PTR_ADDR_LEN(ring->desc[ring_idx + 1]), + PCI_DMA_TODEVICE); + + ring->desc[ring_idx] = ring->desc[ring_idx + 1] = 0; + + ring->next_to_clean++; + for (j = 1; j < desc_size; j++) { + ring_idx = 2 * + (ring->next_to_clean & + (TX_RING_SIZE-1)); + pci_unmap_single( + sc->dma_pdev, + XCT_PTR_ADDR_LEN(ring->desc[ring_idx]), + PCI_DMA_TODEVICE); + if (ring->desc[ring_idx + 1]) + pci_unmap_single( + sc->dma_pdev, + XCT_PTR_ADDR_LEN( + ring->desc[ + ring_idx + 1]), + PCI_DMA_TODEVICE); + ring->desc[ring_idx] = + ring->desc[ring_idx + 1] = 0; + ring->next_to_clean++; + } + } else { + for (j = 0; j < desc_size; j++) { + ring_idx = 2 * (ring->next_to_clean & (TX_RING_SIZE-1)); + ring->desc[ring_idx] = + ring->desc[ring_idx + 1] = 0; + ring->next_to_clean++; + } + } + } + + ring->total_pktcnt += delta_cnt; + } + spin_unlock_irqrestore(&ring->clean_lock, flags); + + return 0; +} + +static void sweepup_tx(struct pasemi_softc *sc) +{ + int i; + + for (i = 0; i < sc->sc_num_channels; i++) + pasemi_clean_tx(sc, i); +} + +static irqreturn_t pasemi_intr(int irq, void *arg, struct pt_regs *regs) +{ + struct pasemi_softc *sc = arg; + unsigned int reg; + int chan = irq - sc->base_irq; + int chan_index = sc->base_chan + chan; + u64 stat = dma_status->tx_sta[chan_index]; + + DPRINTF("%s()\n", __FUNCTION__); + + if (!(stat & PAS_STATUS_CAUSE_M)) + return IRQ_NONE; + + pasemi_clean_tx(sc, chan); + + stat = dma_status->tx_sta[chan_index]; + + reg = PAS_IOB_DMA_TXCH_RESET_PINTC | + PAS_IOB_DMA_TXCH_RESET_PCNT(sc->tx[chan].total_pktcnt); + + if (stat & PAS_STATUS_SOFT) + reg |= PAS_IOB_DMA_RXCH_RESET_SINTC; + + out_le32(sc->iob_regs + PAS_IOB_DMA_TXCH_RESET(chan_index), reg); + + + return IRQ_HANDLED; +} + +static int pasemi_dma_setup_tx_resources(struct pasemi_softc *sc, int chan) +{ + u32 val; + int chan_index = chan + sc->base_chan; + int ret; + struct pasemi_fnu_txring *ring; + + ring = &sc->tx[chan]; + + spin_lock_init(&ring->fill_lock); + spin_lock_init(&ring->clean_lock); + + ring->desc_info = kzalloc(sizeof(struct pasemi_desc_info) * + TX_RING_SIZE, GFP_KERNEL); + if (!ring->desc_info) + return -ENOMEM; + + /* Allocate descriptors */ + ring->desc = dma_alloc_coherent(&sc->dma_pdev->dev, + TX_RING_SIZE * + 2 * sizeof(u64), + &ring->dma, GFP_KERNEL); + if (!ring->desc) + return -ENOMEM; + + memset((void *) ring->desc, 0, TX_RING_SIZE * 2 * sizeof(u64)); + + out_le32(sc->iob_regs + PAS_IOB_DMA_TXCH_RESET(chan_index), 0x30); + + ring->total_pktcnt = 0; + + out_le32(sc->dma_regs + PAS_DMA_TXCHAN_BASEL(chan_index), + PAS_DMA_TXCHAN_BASEL_BRBL(ring->dma)); + + val = PAS_DMA_TXCHAN_BASEU_BRBH(ring->dma >> 32); + val |= PAS_DMA_TXCHAN_BASEU_SIZ(TX_RING_SIZE >> 2); + + out_le32(sc->dma_regs + PAS_DMA_TXCHAN_BASEU(chan_index), val); + + out_le32(sc->dma_regs + PAS_DMA_TXCHAN_CFG(chan_index), + PAS_DMA_TXCHAN_CFG_TY_FUNC | + PAS_DMA_TXCHAN_CFG_TATTR(chan) | + PAS_DMA_TXCHAN_CFG_WT(2)); + + /* enable tx channel */ + out_le32(sc->dma_regs + + PAS_DMA_TXCHAN_TCMDSTA(chan_index), + PAS_DMA_TXCHAN_TCMDSTA_EN); + + out_le32(sc->iob_regs + PAS_IOB_DMA_TXCH_CFG(chan_index), + PAS_IOB_DMA_TXCH_CFG_CNTTH(1000)); + + ring->next_to_fill = 0; + ring->next_to_clean = 0; + + snprintf(ring->irq_name, sizeof(ring->irq_name), + "%s%d", "crypto", chan); + + ring->irq = irq_create_mapping(NULL, sc->base_irq + chan); + ret = request_irq(ring->irq, (irq_handler_t) + pasemi_intr, IRQF_DISABLED, ring->irq_name, sc); + if (ret) { + printk(KERN_ERR DRV_NAME ": failed to hook irq %d ret %d\n", + ring->irq, ret); + ring->irq = -1; + return ret; + } + + setup_timer(&ring->crypto_timer, (void *) sweepup_tx, (unsigned long) sc); + + return 0; +} + +static device_method_t pasemi_methods = { + /* crypto device methods */ + DEVMETHOD(cryptodev_newsession, pasemi_newsession), + DEVMETHOD(cryptodev_freesession, pasemi_freesession), + DEVMETHOD(cryptodev_process, pasemi_process), +}; + +/* Set up the crypto device structure, private data, + * and anything else we need before we start */ + +static int __devinit +pasemi_dma_probe(struct pci_dev *pdev, const struct pci_device_id *ent) +{ + struct pasemi_softc *sc; + int ret, i; + + DPRINTF(KERN_ERR "%s()\n", __FUNCTION__); + + sc = kzalloc(sizeof(*sc), GFP_KERNEL); + if (!sc) + return -ENOMEM; + + softc_device_init(sc, DRV_NAME, 1, pasemi_methods); + + pci_set_drvdata(pdev, sc); + + spin_lock_init(&sc->sc_chnlock); + + sc->sc_sessions = (struct pasemi_session **) + kzalloc(PASEMI_INITIAL_SESSIONS * + sizeof(struct pasemi_session *), GFP_ATOMIC); + if (sc->sc_sessions == NULL) { + ret = -ENOMEM; + goto out; + } + + sc->sc_nsessions = PASEMI_INITIAL_SESSIONS; + sc->sc_lastchn = 0; + sc->base_irq = pdev->irq + 6; + sc->base_chan = 6; + sc->sc_cid = -1; + sc->dma_pdev = pdev; + + sc->iob_pdev = pci_get_device(PCI_VENDOR_ID_PASEMI, 0xa001, NULL); + if (!sc->iob_pdev) { + dev_err(&pdev->dev, "Can't find I/O Bridge\n"); + ret = -ENODEV; + goto out; + } + + /* This is hardcoded and ugly, but we have some firmware versions + * who don't provide the register space in the device tree. Luckily + * they are at well-known locations so we can just do the math here. + */ + sc->dma_regs = + ioremap(0xe0000000 + (sc->dma_pdev->devfn << 12), 0x2000); + sc->iob_regs = + ioremap(0xe0000000 + (sc->iob_pdev->devfn << 12), 0x2000); + if (!sc->dma_regs || !sc->iob_regs) { + dev_err(&pdev->dev, "Can't map registers\n"); + ret = -ENODEV; + goto out; + } + + dma_status = __ioremap(0xfd800000, 0x1000, 0); + if (!dma_status) { + ret = -ENODEV; + dev_err(&pdev->dev, "Can't map dmastatus space\n"); + goto out; + } + + sc->tx = (struct pasemi_fnu_txring *) + kzalloc(sizeof(struct pasemi_fnu_txring) + * 8, GFP_KERNEL); + if (!sc->tx) { + ret = -ENOMEM; + goto out; + } + + /* Initialize the h/w */ + out_le32(sc->dma_regs + PAS_DMA_COM_CFG, + (in_le32(sc->dma_regs + PAS_DMA_COM_CFG) | + PAS_DMA_COM_CFG_FWF)); + out_le32(sc->dma_regs + PAS_DMA_COM_TXCMD, PAS_DMA_COM_TXCMD_EN); + + for (i = 0; i < PASEMI_FNU_CHANNELS; i++) { + sc->sc_num_channels++; + ret = pasemi_dma_setup_tx_resources(sc, i); + if (ret) + goto out; + } + + sc->sc_cid = crypto_get_driverid(softc_get_device(sc), + CRYPTOCAP_F_HARDWARE); + if (sc->sc_cid < 0) { + printk(KERN_ERR DRV_NAME ": could not get crypto driver id\n"); + ret = -ENXIO; + goto out; + } + + /* register algorithms with the framework */ + printk(DRV_NAME ":"); + + crypto_register(sc->sc_cid, CRYPTO_DES_CBC, 0, 0); + crypto_register(sc->sc_cid, CRYPTO_3DES_CBC, 0, 0); + crypto_register(sc->sc_cid, CRYPTO_AES_CBC, 0, 0); + crypto_register(sc->sc_cid, CRYPTO_ARC4, 0, 0); + crypto_register(sc->sc_cid, CRYPTO_SHA1, 0, 0); + crypto_register(sc->sc_cid, CRYPTO_MD5, 0, 0); + crypto_register(sc->sc_cid, CRYPTO_SHA1_HMAC, 0, 0); + crypto_register(sc->sc_cid, CRYPTO_MD5_HMAC, 0, 0); + + return 0; + +out: + pasemi_dma_remove(pdev); + return ret; +} + +#define MAX_RETRIES 5000 + +static void pasemi_free_tx_resources(struct pasemi_softc *sc, int chan) +{ + struct pasemi_fnu_txring *ring = &sc->tx[chan]; + int chan_index = chan + sc->base_chan; + int retries; + u32 stat; + + /* Stop the channel */ + out_le32(sc->dma_regs + + PAS_DMA_TXCHAN_TCMDSTA(chan_index), + PAS_DMA_TXCHAN_TCMDSTA_ST); + + for (retries = 0; retries < MAX_RETRIES; retries++) { + stat = in_le32(sc->dma_regs + + PAS_DMA_TXCHAN_TCMDSTA(chan_index)); + if (!(stat & PAS_DMA_TXCHAN_TCMDSTA_ACT)) + break; + cond_resched(); + } + + if (stat & PAS_DMA_TXCHAN_TCMDSTA_ACT) + dev_err(&sc->dma_pdev->dev, "Failed to stop tx channel %d\n", + chan_index); + + /* Disable the channel */ + out_le32(sc->dma_regs + + PAS_DMA_TXCHAN_TCMDSTA(chan_index), + 0); + + if (ring->desc_info) + kfree((void *) ring->desc_info); + if (ring->desc) + dma_free_coherent(&sc->dma_pdev->dev, + TX_RING_SIZE * + 2 * sizeof(u64), + (void *) ring->desc, ring->dma); + if (ring->irq != -1) + free_irq(ring->irq, sc); + + del_timer(&ring->crypto_timer); +} + +static void __devexit pasemi_dma_remove(struct pci_dev *pdev) +{ + struct pasemi_softc *sc = pci_get_drvdata(pdev); + int i; + + DPRINTF("%s()\n", __FUNCTION__); + + if (sc->sc_cid >= 0) { + crypto_unregister_all(sc->sc_cid); + } + + if (sc->tx) { + for (i = 0; i < sc->sc_num_channels; i++) + pasemi_free_tx_resources(sc, i); + + kfree(sc->tx); + } + if (sc->sc_sessions) { + for (i = 0; i < sc->sc_nsessions; i++) + kfree(sc->sc_sessions[i]); + kfree(sc->sc_sessions); + } + if (sc->iob_pdev) + pci_dev_put(sc->iob_pdev); + if (sc->dma_regs) + iounmap(sc->dma_regs); + if (sc->iob_regs) + iounmap(sc->iob_regs); + kfree(sc); +} + +static struct pci_device_id pasemi_dma_pci_tbl[] = { + { PCI_DEVICE(PCI_VENDOR_ID_PASEMI, 0xa007) }, +}; + +MODULE_DEVICE_TABLE(pci, pasemi_dma_pci_tbl); + +static struct pci_driver pasemi_dma_driver = { + .name = "pasemi_dma", + .id_table = pasemi_dma_pci_tbl, + .probe = pasemi_dma_probe, + .remove = __devexit_p(pasemi_dma_remove), +}; + +static void __exit pasemi_dma_cleanup_module(void) +{ + pci_unregister_driver(&pasemi_dma_driver); + __iounmap(dma_status); + dma_status = NULL; +} + +int pasemi_dma_init_module(void) +{ + return pci_register_driver(&pasemi_dma_driver); +} + +module_init(pasemi_dma_init_module); +module_exit(pasemi_dma_cleanup_module); + +MODULE_LICENSE("Dual BSD/GPL"); +MODULE_AUTHOR("Egor Martovetsky egor@pasemi.com"); +MODULE_DESCRIPTION("OCF driver for PA Semi PWRficient DMA Crypto Engine"); diff --git a/target/linux/generic-2.4/files/crypto/ocf/pasemi/pasemi_fnu.h b/target/linux/generic-2.4/files/crypto/ocf/pasemi/pasemi_fnu.h new file mode 100644 index 0000000000..1a0dcc8bbd --- /dev/null +++ b/target/linux/generic-2.4/files/crypto/ocf/pasemi/pasemi_fnu.h @@ -0,0 +1,410 @@ +/* + * Copyright (C) 2007 PA Semi, Inc + * + * Driver for the PA Semi PWRficient DMA Crypto Engine, soft state and + * hardware register layouts. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#ifndef PASEMI_FNU_H +#define PASEMI_FNU_H + +#include + +#define PASEMI_SESSION(sid) ((sid) & 0xffffffff) +#define PASEMI_SID(sesn) ((sesn) & 0xffffffff) +#define DPRINTF(a...) if (debug) { printk(DRV_NAME ": " a); } + +/* Must be a power of two */ +#define RX_RING_SIZE 512 +#define TX_RING_SIZE 512 +#define TX_DESC(ring, num) ((ring)->desc[2 * (num & (TX_RING_SIZE-1))]) +#define TX_DESC_INFO(ring, num) ((ring)->desc_info[(num) & (TX_RING_SIZE-1)]) +#define MAX_DESC_SIZE 8 +#define PASEMI_INITIAL_SESSIONS 10 +#define PASEMI_FNU_CHANNELS 8 + +/* DMA descriptor */ +struct pasemi_desc { + u64 quad[2*MAX_DESC_SIZE]; + int quad_cnt; + int size; + int postop; +}; + +/* + * Holds per descriptor data + */ +struct pasemi_desc_info { + int desc_size; + int desc_postop; +#define PASEMI_CHECK_SIG 0x1 + + struct cryptop *cf_crp; +}; + +/* + * Holds per channel data + */ +struct pasemi_fnu_txring { + volatile u64 *desc; + volatile struct + pasemi_desc_info *desc_info; + dma_addr_t dma; + struct timer_list crypto_timer; + spinlock_t fill_lock; + spinlock_t clean_lock; + unsigned int next_to_fill; + unsigned int next_to_clean; + u16 total_pktcnt; + int irq; + int sesn; + char irq_name[10]; +}; + +/* + * Holds data specific to a single pasemi device. + */ +struct pasemi_softc { + softc_device_decl sc_cdev; + struct pci_dev *dma_pdev; /* device backpointer */ + struct pci_dev *iob_pdev; /* device backpointer */ + void __iomem *dma_regs; + void __iomem *iob_regs; + int base_irq; + int base_chan; + int32_t sc_cid; /* crypto tag */ + int sc_nsessions; + struct pasemi_session **sc_sessions; + int sc_num_channels;/* number of crypto channels */ + + /* pointer to the array of txring datastructures, one txring per channel */ + struct pasemi_fnu_txring *tx; + + /* + * mutual exclusion for the channel scheduler + */ + spinlock_t sc_chnlock; + /* last channel used, for now use round-robin to allocate channels */ + int sc_lastchn; +}; + +struct pasemi_session { + u64 civ[2]; + u64 keysz; + u64 key[4]; + u64 ccmd; + u64 hkey[4]; + u64 hseq; + u64 giv[2]; + u64 hiv[4]; + + int used; + dma_addr_t dma_addr; + int chan; +}; + +/* status register layout in IOB region, at 0xfd800000 */ +struct pasdma_status { + u64 rx_sta[64]; + u64 tx_sta[20]; +}; + +#define ALG_IS_CIPHER(alg) ((alg == CRYPTO_DES_CBC) || \ + (alg == CRYPTO_3DES_CBC) || \ + (alg == CRYPTO_AES_CBC) || \ + (alg == CRYPTO_ARC4) || \ + (alg == CRYPTO_NULL_CBC)) + +#define ALG_IS_SIG(alg) ((alg == CRYPTO_MD5) || \ + (alg == CRYPTO_MD5_HMAC) || \ + (alg == CRYPTO_SHA1) || \ + (alg == CRYPTO_SHA1_HMAC) || \ + (alg == CRYPTO_NULL_HMAC)) + +enum { + PAS_DMA_COM_TXCMD = 0x100, /* Transmit Command Register */ + PAS_DMA_COM_TXSTA = 0x104, /* Transmit Status Register */ + PAS_DMA_COM_RXCMD = 0x108, /* Receive Command Register */ + PAS_DMA_COM_RXSTA = 0x10c, /* Receive Status Register */ + PAS_DMA_COM_CFG = 0x114, /* DMA Configuration Register */ +}; + +/* All these registers live in the PCI configuration space for the DMA PCI + * device. Use the normal PCI config access functions for them. + */ + +#define PAS_DMA_COM_CFG_FWF 0x18000000 + +#define PAS_DMA_COM_TXCMD_EN 0x00000001 /* enable */ +#define PAS_DMA_COM_TXSTA_ACT 0x00000001 /* active */ +#define PAS_DMA_COM_RXCMD_EN 0x00000001 /* enable */ +#define PAS_DMA_COM_RXSTA_ACT 0x00000001 /* active */ + +#define _PAS_DMA_TXCHAN_STRIDE 0x20 /* Size per channel */ +#define _PAS_DMA_TXCHAN_TCMDSTA 0x300 /* Command / Status */ +#define _PAS_DMA_TXCHAN_CFG 0x304 /* Configuration */ +#define _PAS_DMA_TXCHAN_DSCRBU 0x308 /* Descriptor BU Allocation */ +#define _PAS_DMA_TXCHAN_INCR 0x310 /* Descriptor increment */ +#define _PAS_DMA_TXCHAN_CNT 0x314 /* Descriptor count/offset */ +#define _PAS_DMA_TXCHAN_BASEL 0x318 /* Descriptor ring base (low) */ +#define _PAS_DMA_TXCHAN_BASEU 0x31c /* (high) */ +#define PAS_DMA_TXCHAN_TCMDSTA(c) (0x300+(c)*_PAS_DMA_TXCHAN_STRIDE) +#define PAS_DMA_TXCHAN_TCMDSTA_EN 0x00000001 /* Enabled */ +#define PAS_DMA_TXCHAN_TCMDSTA_ST 0x00000002 /* Stop interface */ +#define PAS_DMA_TXCHAN_TCMDSTA_ACT 0x00010000 /* Active */ +#define PAS_DMA_TXCHAN_CFG(c) (0x304+(c)*_PAS_DMA_TXCHAN_STRIDE) +#define PAS_DMA_TXCHAN_CFG_TY_FUNC 0x00000002 /* Type = interface */ +#define PAS_DMA_TXCHAN_CFG_TY_IFACE 0x00000000 /* Type = interface */ +#define PAS_DMA_TXCHAN_CFG_TATTR_M 0x0000003c +#define PAS_DMA_TXCHAN_CFG_TATTR_S 2 +#define PAS_DMA_TXCHAN_CFG_TATTR(x) (((x) << PAS_DMA_TXCHAN_CFG_TATTR_S) & \ + PAS_DMA_TXCHAN_CFG_TATTR_M) +#define PAS_DMA_TXCHAN_CFG_WT_M 0x000001c0 +#define PAS_DMA_TXCHAN_CFG_WT_S 6 +#define PAS_DMA_TXCHAN_CFG_WT(x) (((x) << PAS_DMA_TXCHAN_CFG_WT_S) & \ + PAS_DMA_TXCHAN_CFG_WT_M) +#define PAS_DMA_TXCHAN_CFG_LPSQ_FAST 0x00000400 +#define PAS_DMA_TXCHAN_CFG_LPDQ_FAST 0x00000800 +#define PAS_DMA_TXCHAN_CFG_CF 0x00001000 /* Clean first line */ +#define PAS_DMA_TXCHAN_CFG_CL 0x00002000 /* Clean last line */ +#define PAS_DMA_TXCHAN_CFG_UP 0x00004000 /* update tx descr when sent */ +#define PAS_DMA_TXCHAN_INCR(c) (0x310+(c)*_PAS_DMA_TXCHAN_STRIDE) +#define PAS_DMA_TXCHAN_BASEL(c) (0x318+(c)*_PAS_DMA_TXCHAN_STRIDE) +#define PAS_DMA_TXCHAN_BASEL_BRBL_M 0xffffffc0 +#define PAS_DMA_TXCHAN_BASEL_BRBL_S 0 +#define PAS_DMA_TXCHAN_BASEL_BRBL(x) (((x) << PAS_DMA_TXCHAN_BASEL_BRBL_S) & \ + PAS_DMA_TXCHAN_BASEL_BRBL_M) +#define PAS_DMA_TXCHAN_BASEU(c) (0x31c+(c)*_PAS_DMA_TXCHAN_STRIDE) +#define PAS_DMA_TXCHAN_BASEU_BRBH_M 0x00000fff +#define PAS_DMA_TXCHAN_BASEU_BRBH_S 0 +#define PAS_DMA_TXCHAN_BASEU_BRBH(x) (((x) << PAS_DMA_TXCHAN_BASEU_BRBH_S) & \ + PAS_DMA_TXCHAN_BASEU_BRBH_M) +/* # of cache lines worth of buffer ring */ +#define PAS_DMA_TXCHAN_BASEU_SIZ_M 0x3fff0000 +#define PAS_DMA_TXCHAN_BASEU_SIZ_S 16 /* 0 = 16K */ +#define PAS_DMA_TXCHAN_BASEU_SIZ(x) (((x) << PAS_DMA_TXCHAN_BASEU_SIZ_S) & \ + PAS_DMA_TXCHAN_BASEU_SIZ_M) + +#define PAS_STATUS_PCNT_M 0x000000000000ffffull +#define PAS_STATUS_PCNT_S 0 +#define PAS_STATUS_DCNT_M 0x00000000ffff0000ull +#define PAS_STATUS_DCNT_S 16 +#define PAS_STATUS_BPCNT_M 0x0000ffff00000000ull +#define PAS_STATUS_BPCNT_S 32 +#define PAS_STATUS_CAUSE_M 0xf000000000000000ull +#define PAS_STATUS_TIMER 0x1000000000000000ull +#define PAS_STATUS_ERROR 0x2000000000000000ull +#define PAS_STATUS_SOFT 0x4000000000000000ull +#define PAS_STATUS_INT 0x8000000000000000ull + +#define PAS_IOB_DMA_RXCH_CFG(i) (0x1100 + (i)*4) +#define PAS_IOB_DMA_RXCH_CFG_CNTTH_M 0x00000fff +#define PAS_IOB_DMA_RXCH_CFG_CNTTH_S 0 +#define PAS_IOB_DMA_RXCH_CFG_CNTTH(x) (((x) << PAS_IOB_DMA_RXCH_CFG_CNTTH_S) & \ + PAS_IOB_DMA_RXCH_CFG_CNTTH_M) +#define PAS_IOB_DMA_TXCH_CFG(i) (0x1200 + (i)*4) +#define PAS_IOB_DMA_TXCH_CFG_CNTTH_M 0x00000fff +#define PAS_IOB_DMA_TXCH_CFG_CNTTH_S 0 +#define PAS_IOB_DMA_TXCH_CFG_CNTTH(x) (((x) << PAS_IOB_DMA_TXCH_CFG_CNTTH_S) & \ + PAS_IOB_DMA_TXCH_CFG_CNTTH_M) +#define PAS_IOB_DMA_RXCH_STAT(i) (0x1300 + (i)*4) +#define PAS_IOB_DMA_RXCH_STAT_INTGEN 0x00001000 +#define PAS_IOB_DMA_RXCH_STAT_CNTDEL_M 0x00000fff +#define PAS_IOB_DMA_RXCH_STAT_CNTDEL_S 0 +#define PAS_IOB_DMA_RXCH_STAT_CNTDEL(x) (((x) << PAS_IOB_DMA_RXCH_STAT_CNTDEL_S) &\ + PAS_IOB_DMA_RXCH_STAT_CNTDEL_M) +#define PAS_IOB_DMA_TXCH_STAT(i) (0x1400 + (i)*4) +#define PAS_IOB_DMA_TXCH_STAT_INTGEN 0x00001000 +#define PAS_IOB_DMA_TXCH_STAT_CNTDEL_M 0x00000fff +#define PAS_IOB_DMA_TXCH_STAT_CNTDEL_S 0 +#define PAS_IOB_DMA_TXCH_STAT_CNTDEL(x) (((x) << PAS_IOB_DMA_TXCH_STAT_CNTDEL_S) &\ + PAS_IOB_DMA_TXCH_STAT_CNTDEL_M) +#define PAS_IOB_DMA_RXCH_RESET(i) (0x1500 + (i)*4) +#define PAS_IOB_DMA_RXCH_RESET_PCNT_M 0xffff0000 +#define PAS_IOB_DMA_RXCH_RESET_PCNT_S 16 +#define PAS_IOB_DMA_RXCH_RESET_PCNT(x) (((x) << PAS_IOB_DMA_RXCH_RESET_PCNT_S) & \ + PAS_IOB_DMA_RXCH_RESET_PCNT_M) +#define PAS_IOB_DMA_RXCH_RESET_PCNTRST 0x00000020 +#define PAS_IOB_DMA_RXCH_RESET_DCNTRST 0x00000010 +#define PAS_IOB_DMA_RXCH_RESET_TINTC 0x00000008 +#define PAS_IOB_DMA_RXCH_RESET_DINTC 0x00000004 +#define PAS_IOB_DMA_RXCH_RESET_SINTC 0x00000002 +#define PAS_IOB_DMA_RXCH_RESET_PINTC 0x00000001 +#define PAS_IOB_DMA_TXCH_RESET(i) (0x1600 + (i)*4) +#define PAS_IOB_DMA_TXCH_RESET_PCNT_M 0xffff0000 +#define PAS_IOB_DMA_TXCH_RESET_PCNT_S 16 +#define PAS_IOB_DMA_TXCH_RESET_PCNT(x) (((x) << PAS_IOB_DMA_TXCH_RESET_PCNT_S) & \ + PAS_IOB_DMA_TXCH_RESET_PCNT_M) +#define PAS_IOB_DMA_TXCH_RESET_PCNTRST 0x00000020 +#define PAS_IOB_DMA_TXCH_RESET_DCNTRST 0x00000010 +#define PAS_IOB_DMA_TXCH_RESET_TINTC 0x00000008 +#define PAS_IOB_DMA_TXCH_RESET_DINTC 0x00000004 +#define PAS_IOB_DMA_TXCH_RESET_SINTC 0x00000002 +#define PAS_IOB_DMA_TXCH_RESET_PINTC 0x00000001 + +#define PAS_IOB_DMA_COM_TIMEOUTCFG 0x1700 +#define PAS_IOB_DMA_COM_TIMEOUTCFG_TCNT_M 0x00ffffff +#define PAS_IOB_DMA_COM_TIMEOUTCFG_TCNT_S 0 +#define PAS_IOB_DMA_COM_TIMEOUTCFG_TCNT(x) (((x) << PAS_IOB_DMA_COM_TIMEOUTCFG_TCNT_S) & \ + PAS_IOB_DMA_COM_TIMEOUTCFG_TCNT_M) + +/* Transmit descriptor fields */ +#define XCT_MACTX_T 0x8000000000000000ull +#define XCT_MACTX_ST 0x4000000000000000ull +#define XCT_MACTX_NORES 0x0000000000000000ull +#define XCT_MACTX_8BRES 0x1000000000000000ull +#define XCT_MACTX_24BRES 0x2000000000000000ull +#define XCT_MACTX_40BRES 0x3000000000000000ull +#define XCT_MACTX_I 0x0800000000000000ull +#define XCT_MACTX_O 0x0400000000000000ull +#define XCT_MACTX_E 0x0200000000000000ull +#define XCT_MACTX_VLAN_M 0x0180000000000000ull +#define XCT_MACTX_VLAN_NOP 0x0000000000000000ull +#define XCT_MACTX_VLAN_REMOVE 0x0080000000000000ull +#define XCT_MACTX_VLAN_INSERT 0x0100000000000000ull +#define XCT_MACTX_VLAN_REPLACE 0x0180000000000000ull +#define XCT_MACTX_CRC_M 0x0060000000000000ull +#define XCT_MACTX_CRC_NOP 0x0000000000000000ull +#define XCT_MACTX_CRC_INSERT 0x0020000000000000ull +#define XCT_MACTX_CRC_PAD 0x0040000000000000ull +#define XCT_MACTX_CRC_REPLACE 0x0060000000000000ull +#define XCT_MACTX_SS 0x0010000000000000ull +#define XCT_MACTX_LLEN_M 0x00007fff00000000ull +#define XCT_MACTX_LLEN_S 32ull +#define XCT_MACTX_LLEN(x) ((((long)(x)) << XCT_MACTX_LLEN_S) & \ + XCT_MACTX_LLEN_M) +#define XCT_MACTX_IPH_M 0x00000000f8000000ull +#define XCT_MACTX_IPH_S 27ull +#define XCT_MACTX_IPH(x) ((((long)(x)) << XCT_MACTX_IPH_S) & \ + XCT_MACTX_IPH_M) +#define XCT_MACTX_IPO_M 0x0000000007c00000ull +#define XCT_MACTX_IPO_S 22ull +#define XCT_MACTX_IPO(x) ((((long)(x)) << XCT_MACTX_IPO_S) & \ + XCT_MACTX_IPO_M) +#define XCT_MACTX_CSUM_M 0x0000000000000060ull +#define XCT_MACTX_CSUM_NOP 0x0000000000000000ull +#define XCT_MACTX_CSUM_TCP 0x0000000000000040ull +#define XCT_MACTX_CSUM_UDP 0x0000000000000060ull +#define XCT_MACTX_V6 0x0000000000000010ull +#define XCT_MACTX_C 0x0000000000000004ull +#define XCT_MACTX_AL2 0x0000000000000002ull + +#define XCT_PTR_T 0x8000000000000000ull +#define XCT_PTR_LEN_M 0x7ffff00000000000ull +#define XCT_PTR_LEN_S 44 +#define XCT_PTR_LEN(x) ((((long)(x)) << XCT_PTR_LEN_S) & \ + XCT_PTR_LEN_M) +#define XCT_PTR_ADDR_M 0x00000fffffffffffull +#define XCT_PTR_ADDR_S 0 +#define XCT_PTR_ADDR(x) ((((long)(x)) << XCT_PTR_ADDR_S) & \ + XCT_PTR_ADDR_M) + +/* Function descriptor fields */ +#define XCT_FUN_T 0x8000000000000000ull +#define XCT_FUN_ST 0x4000000000000000ull +#define XCT_FUN_NORES 0x0000000000000000ull +#define XCT_FUN_8BRES 0x1000000000000000ull +#define XCT_FUN_24BRES 0x2000000000000000ull +#define XCT_FUN_40BRES 0x3000000000000000ull +#define XCT_FUN_I 0x0800000000000000ull +#define XCT_FUN_O 0x0400000000000000ull +#define XCT_FUN_E 0x0200000000000000ull +#define XCT_FUN_FUN_S 54 +#define XCT_FUN_FUN_M 0x01c0000000000000ull +#define XCT_FUN_FUN(num) ((((long)(num)) << XCT_FUN_FUN_S) & \ + XCT_FUN_FUN_M) +#define XCT_FUN_CRM_NOP 0x0000000000000000ull +#define XCT_FUN_CRM_SIG 0x0008000000000000ull +#define XCT_FUN_CRM_ENC 0x0010000000000000ull +#define XCT_FUN_CRM_DEC 0x0018000000000000ull +#define XCT_FUN_CRM_SIG_ENC 0x0020000000000000ull +#define XCT_FUN_CRM_ENC_SIG 0x0028000000000000ull +#define XCT_FUN_CRM_SIG_DEC 0x0030000000000000ull +#define XCT_FUN_CRM_DEC_SIG 0x0038000000000000ull +#define XCT_FUN_LLEN_M 0x0007ffff00000000ull +#define XCT_FUN_LLEN_S 32ULL +#define XCT_FUN_LLEN(x) ((((long)(x)) << XCT_FUN_LLEN_S) & \ + XCT_FUN_LLEN_M) +#define XCT_FUN_SHL_M 0x00000000f8000000ull +#define XCT_FUN_SHL_S 27ull +#define XCT_FUN_SHL(x) ((((long)(x)) << XCT_FUN_SHL_S) & \ + XCT_FUN_SHL_M) +#define XCT_FUN_CHL_M 0x0000000007c00000ull +#define XCT_FUN_CHL_S 22ull +#define XCT_FUN_CHL(x) ((((long)(x)) << XCT_FUN_CHL_S) & \ + XCT_FUN_CHL_M) +#define XCT_FUN_HSZ_M 0x00000000003c0000ull +#define XCT_FUN_HSZ_S 18ull +#define XCT_FUN_HSZ(x) ((((long)(x)) << XCT_FUN_HSZ_S) & \ + XCT_FUN_HSZ_M) +#define XCT_FUN_ALG_DES 0x0000000000000000ull +#define XCT_FUN_ALG_3DES 0x0000000000008000ull +#define XCT_FUN_ALG_AES 0x0000000000010000ull +#define XCT_FUN_ALG_ARC 0x0000000000018000ull +#define XCT_FUN_ALG_KASUMI 0x0000000000020000ull +#define XCT_FUN_BCM_ECB 0x0000000000000000ull +#define XCT_FUN_BCM_CBC 0x0000000000001000ull +#define XCT_FUN_BCM_CFB 0x0000000000002000ull +#define XCT_FUN_BCM_OFB 0x0000000000003000ull +#define XCT_FUN_BCM_CNT 0x0000000000003800ull +#define XCT_FUN_BCM_KAS_F8 0x0000000000002800ull +#define XCT_FUN_BCM_KAS_F9 0x0000000000001800ull +#define XCT_FUN_BCP_NO_PAD 0x0000000000000000ull +#define XCT_FUN_BCP_ZRO 0x0000000000000200ull +#define XCT_FUN_BCP_PL 0x0000000000000400ull +#define XCT_FUN_BCP_INCR 0x0000000000000600ull +#define XCT_FUN_SIG_MD5 (0ull << 4) +#define XCT_FUN_SIG_SHA1 (2ull << 4) +#define XCT_FUN_SIG_HMAC_MD5 (8ull << 4) +#define XCT_FUN_SIG_HMAC_SHA1 (10ull << 4) +#define XCT_FUN_A 0x0000000000000008ull +#define XCT_FUN_C 0x0000000000000004ull +#define XCT_FUN_AL2 0x0000000000000002ull +#define XCT_FUN_SE 0x0000000000000001ull + +#define XCT_FUN_SRC_PTR(len, addr) (XCT_PTR_LEN(len) | XCT_PTR_ADDR(addr)) +#define XCT_FUN_DST_PTR(len, addr) (XCT_FUN_SRC_PTR(len, addr) | \ + 0x8000000000000000ull) + +#define XCT_CTRL_HDR_FUN_NUM_M 0x01c0000000000000ull +#define XCT_CTRL_HDR_FUN_NUM_S 54 +#define XCT_CTRL_HDR_LEN_M 0x0007ffff00000000ull +#define XCT_CTRL_HDR_LEN_S 32 +#define XCT_CTRL_HDR_REG_M 0x00000000000000ffull +#define XCT_CTRL_HDR_REG_S 0 + +#define XCT_CTRL_HDR(funcN,len,reg) (0x9400000000000000ull | \ + ((((long)(funcN)) << XCT_CTRL_HDR_FUN_NUM_S) \ + & XCT_CTRL_HDR_FUN_NUM_M) | \ + ((((long)(len)) << \ + XCT_CTRL_HDR_LEN_S) & XCT_CTRL_HDR_LEN_M) | \ + ((((long)(reg)) << \ + XCT_CTRL_HDR_REG_S) & XCT_CTRL_HDR_REG_M)) + +/* Function config command options */ +#define DMA_CALGO_DES 0x00 +#define DMA_CALGO_3DES 0x01 +#define DMA_CALGO_AES 0x02 +#define DMA_CALGO_ARC 0x03 + +#define DMA_FN_CIV0 0x02 +#define DMA_FN_CIV1 0x03 +#define DMA_FN_HKEY0 0x0a + +#define XCT_PTR_ADDR_LEN(ptr) ((ptr) & XCT_PTR_ADDR_M), \ + (((ptr) & XCT_PTR_LEN_M) >> XCT_PTR_LEN_S) + +#endif /* PASEMI_FNU_H */ diff --git a/target/linux/generic-2.4/files/crypto/ocf/random.c b/target/linux/generic-2.4/files/crypto/ocf/random.c new file mode 100644 index 0000000000..38dad13d77 --- /dev/null +++ b/target/linux/generic-2.4/files/crypto/ocf/random.c @@ -0,0 +1,322 @@ +/* + * A system independant way of adding entropy to the kernels pool + * this way the drivers can focus on the real work and we can take + * care of pushing it to the appropriate place in the kernel. + * + * This should be fast and callable from timers/interrupts + * + * Written by David McCullough + * Copyright (C) 2006-2010 David McCullough + * Copyright (C) 2004-2005 Intel Corporation. + * + * LICENSE TERMS + * + * The free distribution and use of this software in both source and binary + * form is allowed (with or without changes) provided that: + * + * 1. distributions of this source code include the above copyright + * notice, this list of conditions and the following disclaimer; + * + * 2. distributions in binary form include the above copyright + * notice, this list of conditions and the following disclaimer + * in the documentation and/or other associated materials; + * + * 3. the copyright holder's name is not used to endorse products + * built using this software without specific written permission. + * + * ALTERNATIVELY, provided that this notice is retained in full, this product + * may be distributed under the terms of the GNU General Public License (GPL), + * in which case the provisions of the GPL apply INSTEAD OF those given above. + * + * DISCLAIMER + * + * This software is provided 'as is' with no explicit or implied warranties + * in respect of its properties, including, but not limited to, correctness + * and/or fitness for purpose. + */ + +#ifndef AUTOCONF_INCLUDED +#include +#endif +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#ifdef CONFIG_OCF_FIPS +#include "rndtest.h" +#endif + +#ifndef HAS_RANDOM_INPUT_WAIT +#error "Please do not enable OCF_RANDOMHARVEST unless you have applied patches" +#endif + +#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,27) +#include +#define kill_proc(p,s,v) send_sig(s,find_task_by_vpid(p),0) +#endif + +/* + * a hack to access the debug levels from the crypto driver + */ +extern int crypto_debug; +#define debug crypto_debug + +/* + * a list of all registered random providers + */ +static LIST_HEAD(random_ops); +static int started = 0; +static int initted = 0; + +struct random_op { + struct list_head random_list; + u_int32_t driverid; + int (*read_random)(void *arg, u_int32_t *buf, int len); + void *arg; +}; + +static int random_proc(void *arg); + +static pid_t randomproc = (pid_t) -1; +static spinlock_t random_lock; + +/* + * just init the spin locks + */ +static int +crypto_random_init(void) +{ + spin_lock_init(&random_lock); + initted = 1; + return(0); +} + +/* + * Add the given random reader to our list (if not present) + * and start the thread (if not already started) + * + * we have to assume that driver id is ok for now + */ +int +crypto_rregister( + u_int32_t driverid, + int (*read_random)(void *arg, u_int32_t *buf, int len), + void *arg) +{ + unsigned long flags; + int ret = 0; + struct random_op *rops, *tmp; + + dprintk("%s,%d: %s(0x%x, %p, %p)\n", __FILE__, __LINE__, + __FUNCTION__, driverid, read_random, arg); + + if (!initted) + crypto_random_init(); + +#if 0 + struct cryptocap *cap; + + cap = crypto_checkdriver(driverid); + if (!cap) + return EINVAL; +#endif + + list_for_each_entry_safe(rops, tmp, &random_ops, random_list) { + if (rops->driverid == driverid && rops->read_random == read_random) + return EEXIST; + } + + rops = (struct random_op *) kmalloc(sizeof(*rops), GFP_KERNEL); + if (!rops) + return ENOMEM; + + rops->driverid = driverid; + rops->read_random = read_random; + rops->arg = arg; + + spin_lock_irqsave(&random_lock, flags); + list_add_tail(&rops->random_list, &random_ops); + if (!started) { + randomproc = kernel_thread(random_proc, NULL, CLONE_FS|CLONE_FILES); + if (randomproc < 0) { + ret = randomproc; + printk("crypto: crypto_rregister cannot start random thread; " + "error %d", ret); + } else + started = 1; + } + spin_unlock_irqrestore(&random_lock, flags); + + return ret; +} +EXPORT_SYMBOL(crypto_rregister); + +int +crypto_runregister_all(u_int32_t driverid) +{ + struct random_op *rops, *tmp; + unsigned long flags; + + dprintk("%s,%d: %s(0x%x)\n", __FILE__, __LINE__, __FUNCTION__, driverid); + + list_for_each_entry_safe(rops, tmp, &random_ops, random_list) { + if (rops->driverid == driverid) { + list_del(&rops->random_list); + kfree(rops); + } + } + + spin_lock_irqsave(&random_lock, flags); + if (list_empty(&random_ops) && started) + kill_proc(randomproc, SIGKILL, 1); + spin_unlock_irqrestore(&random_lock, flags); + return(0); +} +EXPORT_SYMBOL(crypto_runregister_all); + +/* + * while we can add entropy to random.c continue to read random data from + * the drivers and push it to random. + */ +static int +random_proc(void *arg) +{ + int n; + int wantcnt; + int bufcnt = 0; + int retval = 0; + int *buf = NULL; + +#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,0) + daemonize(); + spin_lock_irq(¤t->sigmask_lock); + sigemptyset(¤t->blocked); + recalc_sigpending(current); + spin_unlock_irq(¤t->sigmask_lock); + sprintf(current->comm, "ocf-random"); +#else + daemonize("ocf-random"); + allow_signal(SIGKILL); +#endif + + (void) get_fs(); + set_fs(get_ds()); + +#ifdef CONFIG_OCF_FIPS +#define NUM_INT (RNDTEST_NBYTES/sizeof(int)) +#else +#define NUM_INT 32 +#endif + + /* + * some devices can transferr their RNG data direct into memory, + * so make sure it is device friendly + */ + buf = kmalloc(NUM_INT * sizeof(int), GFP_DMA); + if (NULL == buf) { + printk("crypto: RNG could not allocate memory\n"); + retval = -ENOMEM; + goto bad_alloc; + } + + wantcnt = NUM_INT; /* start by adding some entropy */ + + /* + * its possible due to errors or driver removal that we no longer + * have anything to do, if so exit or we will consume all the CPU + * doing nothing + */ + while (!list_empty(&random_ops)) { + struct random_op *rops, *tmp; + +#ifdef CONFIG_OCF_FIPS + if (wantcnt) + wantcnt = NUM_INT; /* FIPs mode can do 20000 bits or none */ +#endif + + /* see if we can get enough entropy to make the world + * a better place. + */ + while (bufcnt < wantcnt && bufcnt < NUM_INT) { + list_for_each_entry_safe(rops, tmp, &random_ops, random_list) { + + n = (*rops->read_random)(rops->arg, &buf[bufcnt], + NUM_INT - bufcnt); + + /* on failure remove the random number generator */ + if (n == -1) { + list_del(&rops->random_list); + printk("crypto: RNG (driverid=0x%x) failed, disabling\n", + rops->driverid); + kfree(rops); + } else if (n > 0) + bufcnt += n; + } + /* give up CPU for a bit, just in case as this is a loop */ + schedule(); + } + + +#ifdef CONFIG_OCF_FIPS + if (bufcnt > 0 && rndtest_buf((unsigned char *) &buf[0])) { + dprintk("crypto: buffer had fips errors, discarding\n"); + bufcnt = 0; + } +#endif + + /* + * if we have a certified buffer, we can send some data + * to /dev/random and move along + */ + if (bufcnt > 0) { + /* add what we have */ + random_input_words(buf, bufcnt, bufcnt*sizeof(int)*8); + bufcnt = 0; + } + + /* give up CPU for a bit so we don't hog while filling */ + schedule(); + + /* wait for needing more */ + wantcnt = random_input_wait(); + + if (wantcnt <= 0) + wantcnt = 0; /* try to get some info again */ + else + /* round up to one word or we can loop forever */ + wantcnt = (wantcnt + (sizeof(int)*8)) / (sizeof(int)*8); + if (wantcnt > NUM_INT) { + wantcnt = NUM_INT; + } + + if (signal_pending(current)) { +#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,0) + spin_lock_irq(¤t->sigmask_lock); +#endif + flush_signals(current); +#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,0) + spin_unlock_irq(¤t->sigmask_lock); +#endif + } + } + + kfree(buf); + +bad_alloc: + spin_lock_irq(&random_lock); + randomproc = (pid_t) -1; + started = 0; + spin_unlock_irq(&random_lock); + + return retval; +} + diff --git a/target/linux/generic-2.4/files/crypto/ocf/rndtest.c b/target/linux/generic-2.4/files/crypto/ocf/rndtest.c new file mode 100644 index 0000000000..b31e1a666d --- /dev/null +++ b/target/linux/generic-2.4/files/crypto/ocf/rndtest.c @@ -0,0 +1,300 @@ +/* $OpenBSD$ */ + +/* + * OCF/Linux port done by David McCullough + * Copyright (C) 2006-2010 David McCullough + * Copyright (C) 2004-2005 Intel Corporation. + * The license and original author are listed below. + * + * Copyright (c) 2002 Jason L. Wright (jason@thought.net) + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. All advertising materials mentioning features or use of this software + * must display the following acknowledgement: + * This product includes software developed by Jason L. Wright + * 4. The name of the author may not be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR + * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, + * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, + * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + */ + +#ifndef AUTOCONF_INCLUDED +#include +#endif +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include "rndtest.h" + +static struct rndtest_stats rndstats; + +static void rndtest_test(struct rndtest_state *); + +/* The tests themselves */ +static int rndtest_monobit(struct rndtest_state *); +static int rndtest_runs(struct rndtest_state *); +static int rndtest_longruns(struct rndtest_state *); +static int rndtest_chi_4(struct rndtest_state *); + +static int rndtest_runs_check(struct rndtest_state *, int, int *); +static void rndtest_runs_record(struct rndtest_state *, int, int *); + +static const struct rndtest_testfunc { + int (*test)(struct rndtest_state *); +} rndtest_funcs[] = { + { rndtest_monobit }, + { rndtest_runs }, + { rndtest_chi_4 }, + { rndtest_longruns }, +}; + +#define RNDTEST_NTESTS (sizeof(rndtest_funcs)/sizeof(rndtest_funcs[0])) + +static void +rndtest_test(struct rndtest_state *rsp) +{ + int i, rv = 0; + + rndstats.rst_tests++; + for (i = 0; i < RNDTEST_NTESTS; i++) + rv |= (*rndtest_funcs[i].test)(rsp); + rsp->rs_discard = (rv != 0); +} + + +extern int crypto_debug; +#define rndtest_verbose 2 +#define rndtest_report(rsp, failure, fmt, a...) \ + { if (failure || crypto_debug) { printk("rng_test: " fmt "\n", a); } else; } + +#define RNDTEST_MONOBIT_MINONES 9725 +#define RNDTEST_MONOBIT_MAXONES 10275 + +static int +rndtest_monobit(struct rndtest_state *rsp) +{ + int i, ones = 0, j; + u_int8_t r; + + for (i = 0; i < RNDTEST_NBYTES; i++) { + r = rsp->rs_buf[i]; + for (j = 0; j < 8; j++, r <<= 1) + if (r & 0x80) + ones++; + } + if (ones > RNDTEST_MONOBIT_MINONES && + ones < RNDTEST_MONOBIT_MAXONES) { + if (rndtest_verbose > 1) + rndtest_report(rsp, 0, "monobit pass (%d < %d < %d)", + RNDTEST_MONOBIT_MINONES, ones, + RNDTEST_MONOBIT_MAXONES); + return (0); + } else { + if (rndtest_verbose) + rndtest_report(rsp, 1, + "monobit failed (%d ones)", ones); + rndstats.rst_monobit++; + return (-1); + } +} + +#define RNDTEST_RUNS_NINTERVAL 6 + +static const struct rndtest_runs_tabs { + u_int16_t min, max; +} rndtest_runs_tab[] = { + { 2343, 2657 }, + { 1135, 1365 }, + { 542, 708 }, + { 251, 373 }, + { 111, 201 }, + { 111, 201 }, +}; + +static int +rndtest_runs(struct rndtest_state *rsp) +{ + int i, j, ones, zeros, rv = 0; + int onei[RNDTEST_RUNS_NINTERVAL], zeroi[RNDTEST_RUNS_NINTERVAL]; + u_int8_t c; + + bzero(onei, sizeof(onei)); + bzero(zeroi, sizeof(zeroi)); + ones = zeros = 0; + for (i = 0; i < RNDTEST_NBYTES; i++) { + c = rsp->rs_buf[i]; + for (j = 0; j < 8; j++, c <<= 1) { + if (c & 0x80) { + ones++; + rndtest_runs_record(rsp, zeros, zeroi); + zeros = 0; + } else { + zeros++; + rndtest_runs_record(rsp, ones, onei); + ones = 0; + } + } + } + rndtest_runs_record(rsp, ones, onei); + rndtest_runs_record(rsp, zeros, zeroi); + + rv |= rndtest_runs_check(rsp, 0, zeroi); + rv |= rndtest_runs_check(rsp, 1, onei); + + if (rv) + rndstats.rst_runs++; + + return (rv); +} + +static void +rndtest_runs_record(struct rndtest_state *rsp, int len, int *intrv) +{ + if (len == 0) + return; + if (len > RNDTEST_RUNS_NINTERVAL) + len = RNDTEST_RUNS_NINTERVAL; + len -= 1; + intrv[len]++; +} + +static int +rndtest_runs_check(struct rndtest_state *rsp, int val, int *src) +{ + int i, rv = 0; + + for (i = 0; i < RNDTEST_RUNS_NINTERVAL; i++) { + if (src[i] < rndtest_runs_tab[i].min || + src[i] > rndtest_runs_tab[i].max) { + rndtest_report(rsp, 1, + "%s interval %d failed (%d, %d-%d)", + val ? "ones" : "zeros", + i + 1, src[i], rndtest_runs_tab[i].min, + rndtest_runs_tab[i].max); + rv = -1; + } else { + rndtest_report(rsp, 0, + "runs pass %s interval %d (%d < %d < %d)", + val ? "ones" : "zeros", + i + 1, rndtest_runs_tab[i].min, src[i], + rndtest_runs_tab[i].max); + } + } + return (rv); +} + +static int +rndtest_longruns(struct rndtest_state *rsp) +{ + int i, j, ones = 0, zeros = 0, maxones = 0, maxzeros = 0; + u_int8_t c; + + for (i = 0; i < RNDTEST_NBYTES; i++) { + c = rsp->rs_buf[i]; + for (j = 0; j < 8; j++, c <<= 1) { + if (c & 0x80) { + zeros = 0; + ones++; + if (ones > maxones) + maxones = ones; + } else { + ones = 0; + zeros++; + if (zeros > maxzeros) + maxzeros = zeros; + } + } + } + + if (maxones < 26 && maxzeros < 26) { + rndtest_report(rsp, 0, "longruns pass (%d ones, %d zeros)", + maxones, maxzeros); + return (0); + } else { + rndtest_report(rsp, 1, "longruns fail (%d ones, %d zeros)", + maxones, maxzeros); + rndstats.rst_longruns++; + return (-1); + } +} + +/* + * chi^2 test over 4 bits: (this is called the poker test in FIPS 140-2, + * but it is really the chi^2 test over 4 bits (the poker test as described + * by Knuth vol 2 is something different, and I take him as authoritative + * on nomenclature over NIST). + */ +#define RNDTEST_CHI4_K 16 +#define RNDTEST_CHI4_K_MASK (RNDTEST_CHI4_K - 1) + +/* + * The unnormalized values are used so that we don't have to worry about + * fractional precision. The "real" value is found by: + * (V - 1562500) * (16 / 5000) = Vn (where V is the unnormalized value) + */ +#define RNDTEST_CHI4_VMIN 1563181 /* 2.1792 */ +#define RNDTEST_CHI4_VMAX 1576929 /* 46.1728 */ + +static int +rndtest_chi_4(struct rndtest_state *rsp) +{ + unsigned int freq[RNDTEST_CHI4_K], i, sum; + + for (i = 0; i < RNDTEST_CHI4_K; i++) + freq[i] = 0; + + /* Get number of occurances of each 4 bit pattern */ + for (i = 0; i < RNDTEST_NBYTES; i++) { + freq[(rsp->rs_buf[i] >> 4) & RNDTEST_CHI4_K_MASK]++; + freq[(rsp->rs_buf[i] >> 0) & RNDTEST_CHI4_K_MASK]++; + } + + for (i = 0, sum = 0; i < RNDTEST_CHI4_K; i++) + sum += freq[i] * freq[i]; + + if (sum >= 1563181 && sum <= 1576929) { + rndtest_report(rsp, 0, "chi^2(4): pass (sum %u)", sum); + return (0); + } else { + rndtest_report(rsp, 1, "chi^2(4): failed (sum %u)", sum); + rndstats.rst_chi++; + return (-1); + } +} + +int +rndtest_buf(unsigned char *buf) +{ + struct rndtest_state rsp; + + memset(&rsp, 0, sizeof(rsp)); + rsp.rs_buf = buf; + rndtest_test(&rsp); + return(rsp.rs_discard); +} + diff --git a/target/linux/generic-2.4/files/crypto/ocf/rndtest.h b/target/linux/generic-2.4/files/crypto/ocf/rndtest.h new file mode 100644 index 0000000000..e9d8ec8d39 --- /dev/null +++ b/target/linux/generic-2.4/files/crypto/ocf/rndtest.h @@ -0,0 +1,54 @@ +/* $FreeBSD: src/sys/dev/rndtest/rndtest.h,v 1.1 2003/03/11 22:54:44 sam Exp $ */ +/* $OpenBSD$ */ + +/* + * Copyright (c) 2002 Jason L. Wright (jason@thought.net) + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. All advertising materials mentioning features or use of this software + * must display the following acknowledgement: + * This product includes software developed by Jason L. Wright + * 4. The name of the author may not be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR + * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, + * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, + * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + */ + + +/* Some of the tests depend on these values */ +#define RNDTEST_NBYTES 2500 +#define RNDTEST_NBITS (8 * RNDTEST_NBYTES) + +struct rndtest_state { + int rs_discard; /* discard/accept random data */ + u_int8_t *rs_buf; +}; + +struct rndtest_stats { + u_int32_t rst_discard; /* number of bytes discarded */ + u_int32_t rst_tests; /* number of test runs */ + u_int32_t rst_monobit; /* monobit test failures */ + u_int32_t rst_runs; /* 0/1 runs failures */ + u_int32_t rst_longruns; /* longruns failures */ + u_int32_t rst_chi; /* chi^2 failures */ +}; + +extern int rndtest_buf(unsigned char *buf); diff --git a/target/linux/generic-2.4/files/crypto/ocf/safe/Makefile b/target/linux/generic-2.4/files/crypto/ocf/safe/Makefile new file mode 100644 index 0000000000..9a36b081e5 --- /dev/null +++ b/target/linux/generic-2.4/files/crypto/ocf/safe/Makefile @@ -0,0 +1,12 @@ +# for SGlinux builds +-include $(ROOTDIR)/modules/.config + +obj-$(CONFIG_OCF_SAFE) += safe.o + +obj ?= . +EXTRA_CFLAGS += -I$(obj)/.. -I$(obj)/ + +ifdef TOPDIR +-include $(TOPDIR)/Rules.make +endif + diff --git a/target/linux/generic-2.4/files/crypto/ocf/safe/md5.c b/target/linux/generic-2.4/files/crypto/ocf/safe/md5.c new file mode 100644 index 0000000000..077c42e787 --- /dev/null +++ b/target/linux/generic-2.4/files/crypto/ocf/safe/md5.c @@ -0,0 +1,308 @@ +/* $KAME: md5.c,v 1.5 2000/11/08 06:13:08 itojun Exp $ */ +/* + * Copyright (C) 1995, 1996, 1997, and 1998 WIDE Project. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. Neither the name of the project nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE PROJECT AND CONTRIBUTORS ``AS IS'' AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE PROJECT OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + */ + +#if 0 +#include +__FBSDID("$FreeBSD: src/sys/crypto/md5.c,v 1.9 2004/01/27 19:49:19 des Exp $"); + +#include +#include +#include +#include +#include +#endif + +#define SHIFT(X, s) (((X) << (s)) | ((X) >> (32 - (s)))) + +#define F(X, Y, Z) (((X) & (Y)) | ((~X) & (Z))) +#define G(X, Y, Z) (((X) & (Z)) | ((Y) & (~Z))) +#define H(X, Y, Z) ((X) ^ (Y) ^ (Z)) +#define I(X, Y, Z) ((Y) ^ ((X) | (~Z))) + +#define ROUND1(a, b, c, d, k, s, i) { \ + (a) = (a) + F((b), (c), (d)) + X[(k)] + T[(i)]; \ + (a) = SHIFT((a), (s)); \ + (a) = (b) + (a); \ +} + +#define ROUND2(a, b, c, d, k, s, i) { \ + (a) = (a) + G((b), (c), (d)) + X[(k)] + T[(i)]; \ + (a) = SHIFT((a), (s)); \ + (a) = (b) + (a); \ +} + +#define ROUND3(a, b, c, d, k, s, i) { \ + (a) = (a) + H((b), (c), (d)) + X[(k)] + T[(i)]; \ + (a) = SHIFT((a), (s)); \ + (a) = (b) + (a); \ +} + +#define ROUND4(a, b, c, d, k, s, i) { \ + (a) = (a) + I((b), (c), (d)) + X[(k)] + T[(i)]; \ + (a) = SHIFT((a), (s)); \ + (a) = (b) + (a); \ +} + +#define Sa 7 +#define Sb 12 +#define Sc 17 +#define Sd 22 + +#define Se 5 +#define Sf 9 +#define Sg 14 +#define Sh 20 + +#define Si 4 +#define Sj 11 +#define Sk 16 +#define Sl 23 + +#define Sm 6 +#define Sn 10 +#define So 15 +#define Sp 21 + +#define MD5_A0 0x67452301 +#define MD5_B0 0xefcdab89 +#define MD5_C0 0x98badcfe +#define MD5_D0 0x10325476 + +/* Integer part of 4294967296 times abs(sin(i)), where i is in radians. */ +static const u_int32_t T[65] = { + 0, + 0xd76aa478, 0xe8c7b756, 0x242070db, 0xc1bdceee, + 0xf57c0faf, 0x4787c62a, 0xa8304613, 0xfd469501, + 0x698098d8, 0x8b44f7af, 0xffff5bb1, 0x895cd7be, + 0x6b901122, 0xfd987193, 0xa679438e, 0x49b40821, + + 0xf61e2562, 0xc040b340, 0x265e5a51, 0xe9b6c7aa, + 0xd62f105d, 0x2441453, 0xd8a1e681, 0xe7d3fbc8, + 0x21e1cde6, 0xc33707d6, 0xf4d50d87, 0x455a14ed, + 0xa9e3e905, 0xfcefa3f8, 0x676f02d9, 0x8d2a4c8a, + + 0xfffa3942, 0x8771f681, 0x6d9d6122, 0xfde5380c, + 0xa4beea44, 0x4bdecfa9, 0xf6bb4b60, 0xbebfbc70, + 0x289b7ec6, 0xeaa127fa, 0xd4ef3085, 0x4881d05, + 0xd9d4d039, 0xe6db99e5, 0x1fa27cf8, 0xc4ac5665, + + 0xf4292244, 0x432aff97, 0xab9423a7, 0xfc93a039, + 0x655b59c3, 0x8f0ccc92, 0xffeff47d, 0x85845dd1, + 0x6fa87e4f, 0xfe2ce6e0, 0xa3014314, 0x4e0811a1, + 0xf7537e82, 0xbd3af235, 0x2ad7d2bb, 0xeb86d391, +}; + +static const u_int8_t md5_paddat[MD5_BUFLEN] = { + 0x80, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, +}; + +static void md5_calc(u_int8_t *, md5_ctxt *); + +void md5_init(ctxt) + md5_ctxt *ctxt; +{ + ctxt->md5_n = 0; + ctxt->md5_i = 0; + ctxt->md5_sta = MD5_A0; + ctxt->md5_stb = MD5_B0; + ctxt->md5_stc = MD5_C0; + ctxt->md5_std = MD5_D0; + bzero(ctxt->md5_buf, sizeof(ctxt->md5_buf)); +} + +void md5_loop(ctxt, input, len) + md5_ctxt *ctxt; + u_int8_t *input; + u_int len; /* number of bytes */ +{ + u_int gap, i; + + ctxt->md5_n += len * 8; /* byte to bit */ + gap = MD5_BUFLEN - ctxt->md5_i; + + if (len >= gap) { + bcopy((void *)input, (void *)(ctxt->md5_buf + ctxt->md5_i), + gap); + md5_calc(ctxt->md5_buf, ctxt); + + for (i = gap; i + MD5_BUFLEN <= len; i += MD5_BUFLEN) { + md5_calc((u_int8_t *)(input + i), ctxt); + } + + ctxt->md5_i = len - i; + bcopy((void *)(input + i), (void *)ctxt->md5_buf, ctxt->md5_i); + } else { + bcopy((void *)input, (void *)(ctxt->md5_buf + ctxt->md5_i), + len); + ctxt->md5_i += len; + } +} + +void md5_pad(ctxt) + md5_ctxt *ctxt; +{ + u_int gap; + + /* Don't count up padding. Keep md5_n. */ + gap = MD5_BUFLEN - ctxt->md5_i; + if (gap > 8) { + bcopy(md5_paddat, + (void *)(ctxt->md5_buf + ctxt->md5_i), + gap - sizeof(ctxt->md5_n)); + } else { + /* including gap == 8 */ + bcopy(md5_paddat, (void *)(ctxt->md5_buf + ctxt->md5_i), + gap); + md5_calc(ctxt->md5_buf, ctxt); + bcopy((md5_paddat + gap), + (void *)ctxt->md5_buf, + MD5_BUFLEN - sizeof(ctxt->md5_n)); + } + + /* 8 byte word */ +#if BYTE_ORDER == LITTLE_ENDIAN + bcopy(&ctxt->md5_n8[0], &ctxt->md5_buf[56], 8); +#endif +#if BYTE_ORDER == BIG_ENDIAN + ctxt->md5_buf[56] = ctxt->md5_n8[7]; + ctxt->md5_buf[57] = ctxt->md5_n8[6]; + ctxt->md5_buf[58] = ctxt->md5_n8[5]; + ctxt->md5_buf[59] = ctxt->md5_n8[4]; + ctxt->md5_buf[60] = ctxt->md5_n8[3]; + ctxt->md5_buf[61] = ctxt->md5_n8[2]; + ctxt->md5_buf[62] = ctxt->md5_n8[1]; + ctxt->md5_buf[63] = ctxt->md5_n8[0]; +#endif + + md5_calc(ctxt->md5_buf, ctxt); +} + +void md5_result(digest, ctxt) + u_int8_t *digest; + md5_ctxt *ctxt; +{ + /* 4 byte words */ +#if BYTE_ORDER == LITTLE_ENDIAN + bcopy(&ctxt->md5_st8[0], digest, 16); +#endif +#if BYTE_ORDER == BIG_ENDIAN + digest[ 0] = ctxt->md5_st8[ 3]; digest[ 1] = ctxt->md5_st8[ 2]; + digest[ 2] = ctxt->md5_st8[ 1]; digest[ 3] = ctxt->md5_st8[ 0]; + digest[ 4] = ctxt->md5_st8[ 7]; digest[ 5] = ctxt->md5_st8[ 6]; + digest[ 6] = ctxt->md5_st8[ 5]; digest[ 7] = ctxt->md5_st8[ 4]; + digest[ 8] = ctxt->md5_st8[11]; digest[ 9] = ctxt->md5_st8[10]; + digest[10] = ctxt->md5_st8[ 9]; digest[11] = ctxt->md5_st8[ 8]; + digest[12] = ctxt->md5_st8[15]; digest[13] = ctxt->md5_st8[14]; + digest[14] = ctxt->md5_st8[13]; digest[15] = ctxt->md5_st8[12]; +#endif +} + +static void md5_calc(b64, ctxt) + u_int8_t *b64; + md5_ctxt *ctxt; +{ + u_int32_t A = ctxt->md5_sta; + u_int32_t B = ctxt->md5_stb; + u_int32_t C = ctxt->md5_stc; + u_int32_t D = ctxt->md5_std; +#if BYTE_ORDER == LITTLE_ENDIAN + u_int32_t *X = (u_int32_t *)b64; +#endif +#if BYTE_ORDER == BIG_ENDIAN + /* 4 byte words */ + /* what a brute force but fast! */ + u_int32_t X[16]; + u_int8_t *y = (u_int8_t *)X; + y[ 0] = b64[ 3]; y[ 1] = b64[ 2]; y[ 2] = b64[ 1]; y[ 3] = b64[ 0]; + y[ 4] = b64[ 7]; y[ 5] = b64[ 6]; y[ 6] = b64[ 5]; y[ 7] = b64[ 4]; + y[ 8] = b64[11]; y[ 9] = b64[10]; y[10] = b64[ 9]; y[11] = b64[ 8]; + y[12] = b64[15]; y[13] = b64[14]; y[14] = b64[13]; y[15] = b64[12]; + y[16] = b64[19]; y[17] = b64[18]; y[18] = b64[17]; y[19] = b64[16]; + y[20] = b64[23]; y[21] = b64[22]; y[22] = b64[21]; y[23] = b64[20]; + y[24] = b64[27]; y[25] = b64[26]; y[26] = b64[25]; y[27] = b64[24]; + y[28] = b64[31]; y[29] = b64[30]; y[30] = b64[29]; y[31] = b64[28]; + y[32] = b64[35]; y[33] = b64[34]; y[34] = b64[33]; y[35] = b64[32]; + y[36] = b64[39]; y[37] = b64[38]; y[38] = b64[37]; y[39] = b64[36]; + y[40] = b64[43]; y[41] = b64[42]; y[42] = b64[41]; y[43] = b64[40]; + y[44] = b64[47]; y[45] = b64[46]; y[46] = b64[45]; y[47] = b64[44]; + y[48] = b64[51]; y[49] = b64[50]; y[50] = b64[49]; y[51] = b64[48]; + y[52] = b64[55]; y[53] = b64[54]; y[54] = b64[53]; y[55] = b64[52]; + y[56] = b64[59]; y[57] = b64[58]; y[58] = b64[57]; y[59] = b64[56]; + y[60] = b64[63]; y[61] = b64[62]; y[62] = b64[61]; y[63] = b64[60]; +#endif + + ROUND1(A, B, C, D, 0, Sa, 1); ROUND1(D, A, B, C, 1, Sb, 2); + ROUND1(C, D, A, B, 2, Sc, 3); ROUND1(B, C, D, A, 3, Sd, 4); + ROUND1(A, B, C, D, 4, Sa, 5); ROUND1(D, A, B, C, 5, Sb, 6); + ROUND1(C, D, A, B, 6, Sc, 7); ROUND1(B, C, D, A, 7, Sd, 8); + ROUND1(A, B, C, D, 8, Sa, 9); ROUND1(D, A, B, C, 9, Sb, 10); + ROUND1(C, D, A, B, 10, Sc, 11); ROUND1(B, C, D, A, 11, Sd, 12); + ROUND1(A, B, C, D, 12, Sa, 13); ROUND1(D, A, B, C, 13, Sb, 14); + ROUND1(C, D, A, B, 14, Sc, 15); ROUND1(B, C, D, A, 15, Sd, 16); + + ROUND2(A, B, C, D, 1, Se, 17); ROUND2(D, A, B, C, 6, Sf, 18); + ROUND2(C, D, A, B, 11, Sg, 19); ROUND2(B, C, D, A, 0, Sh, 20); + ROUND2(A, B, C, D, 5, Se, 21); ROUND2(D, A, B, C, 10, Sf, 22); + ROUND2(C, D, A, B, 15, Sg, 23); ROUND2(B, C, D, A, 4, Sh, 24); + ROUND2(A, B, C, D, 9, Se, 25); ROUND2(D, A, B, C, 14, Sf, 26); + ROUND2(C, D, A, B, 3, Sg, 27); ROUND2(B, C, D, A, 8, Sh, 28); + ROUND2(A, B, C, D, 13, Se, 29); ROUND2(D, A, B, C, 2, Sf, 30); + ROUND2(C, D, A, B, 7, Sg, 31); ROUND2(B, C, D, A, 12, Sh, 32); + + ROUND3(A, B, C, D, 5, Si, 33); ROUND3(D, A, B, C, 8, Sj, 34); + ROUND3(C, D, A, B, 11, Sk, 35); ROUND3(B, C, D, A, 14, Sl, 36); + ROUND3(A, B, C, D, 1, Si, 37); ROUND3(D, A, B, C, 4, Sj, 38); + ROUND3(C, D, A, B, 7, Sk, 39); ROUND3(B, C, D, A, 10, Sl, 40); + ROUND3(A, B, C, D, 13, Si, 41); ROUND3(D, A, B, C, 0, Sj, 42); + ROUND3(C, D, A, B, 3, Sk, 43); ROUND3(B, C, D, A, 6, Sl, 44); + ROUND3(A, B, C, D, 9, Si, 45); ROUND3(D, A, B, C, 12, Sj, 46); + ROUND3(C, D, A, B, 15, Sk, 47); ROUND3(B, C, D, A, 2, Sl, 48); + + ROUND4(A, B, C, D, 0, Sm, 49); ROUND4(D, A, B, C, 7, Sn, 50); + ROUND4(C, D, A, B, 14, So, 51); ROUND4(B, C, D, A, 5, Sp, 52); + ROUND4(A, B, C, D, 12, Sm, 53); ROUND4(D, A, B, C, 3, Sn, 54); + ROUND4(C, D, A, B, 10, So, 55); ROUND4(B, C, D, A, 1, Sp, 56); + ROUND4(A, B, C, D, 8, Sm, 57); ROUND4(D, A, B, C, 15, Sn, 58); + ROUND4(C, D, A, B, 6, So, 59); ROUND4(B, C, D, A, 13, Sp, 60); + ROUND4(A, B, C, D, 4, Sm, 61); ROUND4(D, A, B, C, 11, Sn, 62); + ROUND4(C, D, A, B, 2, So, 63); ROUND4(B, C, D, A, 9, Sp, 64); + + ctxt->md5_sta += A; + ctxt->md5_stb += B; + ctxt->md5_stc += C; + ctxt->md5_std += D; +} diff --git a/target/linux/generic-2.4/files/crypto/ocf/safe/md5.h b/target/linux/generic-2.4/files/crypto/ocf/safe/md5.h new file mode 100644 index 0000000000..690f5bfc11 --- /dev/null +++ b/target/linux/generic-2.4/files/crypto/ocf/safe/md5.h @@ -0,0 +1,76 @@ +/* $FreeBSD: src/sys/crypto/md5.h,v 1.4 2002/03/20 05:13:50 alfred Exp $ */ +/* $KAME: md5.h,v 1.4 2000/03/27 04:36:22 sumikawa Exp $ */ + +/* + * Copyright (C) 1995, 1996, 1997, and 1998 WIDE Project. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. Neither the name of the project nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE PROJECT AND CONTRIBUTORS ``AS IS'' AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE PROJECT OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + */ + +#ifndef _NETINET6_MD5_H_ +#define _NETINET6_MD5_H_ + +#define MD5_BUFLEN 64 + +typedef struct { + union { + u_int32_t md5_state32[4]; + u_int8_t md5_state8[16]; + } md5_st; + +#define md5_sta md5_st.md5_state32[0] +#define md5_stb md5_st.md5_state32[1] +#define md5_stc md5_st.md5_state32[2] +#define md5_std md5_st.md5_state32[3] +#define md5_st8 md5_st.md5_state8 + + union { + u_int64_t md5_count64; + u_int8_t md5_count8[8]; + } md5_count; +#define md5_n md5_count.md5_count64 +#define md5_n8 md5_count.md5_count8 + + u_int md5_i; + u_int8_t md5_buf[MD5_BUFLEN]; +} md5_ctxt; + +extern void md5_init(md5_ctxt *); +extern void md5_loop(md5_ctxt *, u_int8_t *, u_int); +extern void md5_pad(md5_ctxt *); +extern void md5_result(u_int8_t *, md5_ctxt *); + +/* compatibility */ +#define MD5_CTX md5_ctxt +#define MD5Init(x) md5_init((x)) +#define MD5Update(x, y, z) md5_loop((x), (y), (z)) +#define MD5Final(x, y) \ +do { \ + md5_pad((y)); \ + md5_result((x), (y)); \ +} while (0) + +#endif /* ! _NETINET6_MD5_H_*/ diff --git a/target/linux/generic-2.4/files/crypto/ocf/safe/safe.c b/target/linux/generic-2.4/files/crypto/ocf/safe/safe.c new file mode 100644 index 0000000000..7e65101769 --- /dev/null +++ b/target/linux/generic-2.4/files/crypto/ocf/safe/safe.c @@ -0,0 +1,2288 @@ +/*- + * Linux port done by David McCullough + * Copyright (C) 2004-2010 David McCullough + * The license and original author are listed below. + * + * Copyright (c) 2003 Sam Leffler, Errno Consulting + * Copyright (c) 2003 Global Technology Associates, Inc. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * + * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + * +__FBSDID("$FreeBSD: src/sys/dev/safe/safe.c,v 1.18 2007/03/21 03:42:50 sam Exp $"); + */ + +#ifndef AUTOCONF_INCLUDED +#include +#endif +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/* + * SafeNet SafeXcel-1141 hardware crypto accelerator + */ + +#include +#include +#include +#include + +#if 1 +#define DPRINTF(a) do { \ + if (debug) { \ + printk("%s: ", sc ? \ + device_get_nameunit(sc->sc_dev) : "safe"); \ + printk a; \ + } \ + } while (0) +#else +#define DPRINTF(a) +#endif + +/* + * until we find a cleaner way, include the BSD md5/sha1 code + * here + */ +#define HMAC_HACK 1 +#ifdef HMAC_HACK +#define LITTLE_ENDIAN 1234 +#define BIG_ENDIAN 4321 +#ifdef __LITTLE_ENDIAN +#define BYTE_ORDER LITTLE_ENDIAN +#endif +#ifdef __BIG_ENDIAN +#define BYTE_ORDER BIG_ENDIAN +#endif +#include +#include +#include +#include + +u_int8_t hmac_ipad_buffer[64] = { + 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, + 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, + 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, + 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, + 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, + 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, + 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, + 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36 +}; + +u_int8_t hmac_opad_buffer[64] = { + 0x5C, 0x5C, 0x5C, 0x5C, 0x5C, 0x5C, 0x5C, 0x5C, + 0x5C, 0x5C, 0x5C, 0x5C, 0x5C, 0x5C, 0x5C, 0x5C, + 0x5C, 0x5C, 0x5C, 0x5C, 0x5C, 0x5C, 0x5C, 0x5C, + 0x5C, 0x5C, 0x5C, 0x5C, 0x5C, 0x5C, 0x5C, 0x5C, + 0x5C, 0x5C, 0x5C, 0x5C, 0x5C, 0x5C, 0x5C, 0x5C, + 0x5C, 0x5C, 0x5C, 0x5C, 0x5C, 0x5C, 0x5C, 0x5C, + 0x5C, 0x5C, 0x5C, 0x5C, 0x5C, 0x5C, 0x5C, 0x5C, + 0x5C, 0x5C, 0x5C, 0x5C, 0x5C, 0x5C, 0x5C, 0x5C +}; +#endif /* HMAC_HACK */ + +/* add proc entry for this */ +struct safe_stats safestats; + +#define debug safe_debug +int safe_debug = 0; +module_param(safe_debug, int, 0644); +MODULE_PARM_DESC(safe_debug, "Enable debug"); + +static void safe_callback(struct safe_softc *, struct safe_ringentry *); +static void safe_feed(struct safe_softc *, struct safe_ringentry *); +#if defined(CONFIG_OCF_RANDOMHARVEST) && !defined(SAFE_NO_RNG) +static void safe_rng_init(struct safe_softc *); +int safe_rngbufsize = 8; /* 32 bytes each read */ +module_param(safe_rngbufsize, int, 0644); +MODULE_PARM_DESC(safe_rngbufsize, "RNG polling buffer size (32-bit words)"); +int safe_rngmaxalarm = 8; /* max alarms before reset */ +module_param(safe_rngmaxalarm, int, 0644); +MODULE_PARM_DESC(safe_rngmaxalarm, "RNG max alarms before reset"); +#endif /* SAFE_NO_RNG */ + +static void safe_totalreset(struct safe_softc *sc); +static int safe_dmamap_aligned(struct safe_softc *sc, const struct safe_operand *op); +static int safe_dmamap_uniform(struct safe_softc *sc, const struct safe_operand *op); +static int safe_free_entry(struct safe_softc *sc, struct safe_ringentry *re); +static int safe_kprocess(device_t dev, struct cryptkop *krp, int hint); +static int safe_kstart(struct safe_softc *sc); +static int safe_ksigbits(struct safe_softc *sc, struct crparam *cr); +static void safe_kfeed(struct safe_softc *sc); +static void safe_kpoll(unsigned long arg); +static void safe_kload_reg(struct safe_softc *sc, u_int32_t off, + u_int32_t len, struct crparam *n); + +static int safe_newsession(device_t, u_int32_t *, struct cryptoini *); +static int safe_freesession(device_t, u_int64_t); +static int safe_process(device_t, struct cryptop *, int); + +static device_method_t safe_methods = { + /* crypto device methods */ + DEVMETHOD(cryptodev_newsession, safe_newsession), + DEVMETHOD(cryptodev_freesession,safe_freesession), + DEVMETHOD(cryptodev_process, safe_process), + DEVMETHOD(cryptodev_kprocess, safe_kprocess), +}; + +#define READ_REG(sc,r) readl((sc)->sc_base_addr + (r)) +#define WRITE_REG(sc,r,val) writel((val), (sc)->sc_base_addr + (r)) + +#define SAFE_MAX_CHIPS 8 +static struct safe_softc *safe_chip_idx[SAFE_MAX_CHIPS]; + +/* + * split our buffers up into safe DMAable byte fragments to avoid lockup + * bug in 1141 HW on rev 1.0. + */ + +static int +pci_map_linear( + struct safe_softc *sc, + struct safe_operand *buf, + void *addr, + int len) +{ + dma_addr_t tmp; + int chunk, tlen = len; + + tmp = pci_map_single(sc->sc_pcidev, addr, len, PCI_DMA_BIDIRECTIONAL); + + buf->mapsize += len; + while (len > 0) { + chunk = (len > sc->sc_max_dsize) ? sc->sc_max_dsize : len; + buf->segs[buf->nsegs].ds_addr = tmp; + buf->segs[buf->nsegs].ds_len = chunk; + buf->segs[buf->nsegs].ds_tlen = tlen; + buf->nsegs++; + tmp += chunk; + len -= chunk; + tlen = 0; + } + return 0; +} + +/* + * map in a given uio buffer (great on some arches :-) + */ + +static int +pci_map_uio(struct safe_softc *sc, struct safe_operand *buf, struct uio *uio) +{ + struct iovec *iov = uio->uio_iov; + int n; + + DPRINTF(("%s()\n", __FUNCTION__)); + + buf->mapsize = 0; + buf->nsegs = 0; + + for (n = 0; n < uio->uio_iovcnt; n++) { + pci_map_linear(sc, buf, iov->iov_base, iov->iov_len); + iov++; + } + + /* identify this buffer by the first segment */ + buf->map = (void *) buf->segs[0].ds_addr; + return(0); +} + +/* + * map in a given sk_buff + */ + +static int +pci_map_skb(struct safe_softc *sc,struct safe_operand *buf,struct sk_buff *skb) +{ + int i; + + DPRINTF(("%s()\n", __FUNCTION__)); + + buf->mapsize = 0; + buf->nsegs = 0; + + pci_map_linear(sc, buf, skb->data, skb_headlen(skb)); + + for (i = 0; i < skb_shinfo(skb)->nr_frags; i++) { + pci_map_linear(sc, buf, + page_address(skb_shinfo(skb)->frags[i].page) + + skb_shinfo(skb)->frags[i].page_offset, + skb_shinfo(skb)->frags[i].size); + } + + /* identify this buffer by the first segment */ + buf->map = (void *) buf->segs[0].ds_addr; + return(0); +} + + +#if 0 /* not needed at this time */ +static void +pci_sync_operand(struct safe_softc *sc, struct safe_operand *buf) +{ + int i; + + DPRINTF(("%s()\n", __FUNCTION__)); + for (i = 0; i < buf->nsegs; i++) + pci_dma_sync_single_for_cpu(sc->sc_pcidev, buf->segs[i].ds_addr, + buf->segs[i].ds_len, PCI_DMA_BIDIRECTIONAL); +} +#endif + +static void +pci_unmap_operand(struct safe_softc *sc, struct safe_operand *buf) +{ + int i; + DPRINTF(("%s()\n", __FUNCTION__)); + for (i = 0; i < buf->nsegs; i++) { + if (buf->segs[i].ds_tlen) { + DPRINTF(("%s - unmap %d 0x%x %d\n", __FUNCTION__, i, buf->segs[i].ds_addr, buf->segs[i].ds_tlen)); + pci_unmap_single(sc->sc_pcidev, buf->segs[i].ds_addr, + buf->segs[i].ds_tlen, PCI_DMA_BIDIRECTIONAL); + DPRINTF(("%s - unmap %d 0x%x %d done\n", __FUNCTION__, i, buf->segs[i].ds_addr, buf->segs[i].ds_tlen)); + } + buf->segs[i].ds_addr = 0; + buf->segs[i].ds_len = 0; + buf->segs[i].ds_tlen = 0; + } + buf->nsegs = 0; + buf->mapsize = 0; + buf->map = 0; +} + + +/* + * SafeXcel Interrupt routine + */ +static irqreturn_t +#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,19) +safe_intr(int irq, void *arg) +#else +safe_intr(int irq, void *arg, struct pt_regs *regs) +#endif +{ + struct safe_softc *sc = arg; + int stat; + unsigned long flags; + + stat = READ_REG(sc, SAFE_HM_STAT); + + DPRINTF(("%s(stat=0x%x)\n", __FUNCTION__, stat)); + + if (stat == 0) /* shared irq, not for us */ + return IRQ_NONE; + + WRITE_REG(sc, SAFE_HI_CLR, stat); /* IACK */ + + if ((stat & SAFE_INT_PE_DDONE)) { + /* + * Descriptor(s) done; scan the ring and + * process completed operations. + */ + spin_lock_irqsave(&sc->sc_ringmtx, flags); + while (sc->sc_back != sc->sc_front) { + struct safe_ringentry *re = sc->sc_back; + +#ifdef SAFE_DEBUG + if (debug) { + safe_dump_ringstate(sc, __func__); + safe_dump_request(sc, __func__, re); + } +#endif + /* + * safe_process marks ring entries that were allocated + * but not used with a csr of zero. This insures the + * ring front pointer never needs to be set backwards + * in the event that an entry is allocated but not used + * because of a setup error. + */ + DPRINTF(("%s re->re_desc.d_csr=0x%x\n", __FUNCTION__, re->re_desc.d_csr)); + if (re->re_desc.d_csr != 0) { + if (!SAFE_PE_CSR_IS_DONE(re->re_desc.d_csr)) { + DPRINTF(("%s !CSR_IS_DONE\n", __FUNCTION__)); + break; + } + if (!SAFE_PE_LEN_IS_DONE(re->re_desc.d_len)) { + DPRINTF(("%s !LEN_IS_DONE\n", __FUNCTION__)); + break; + } + sc->sc_nqchip--; + safe_callback(sc, re); + } + if (++(sc->sc_back) == sc->sc_ringtop) + sc->sc_back = sc->sc_ring; + } + spin_unlock_irqrestore(&sc->sc_ringmtx, flags); + } + + /* + * Check to see if we got any DMA Error + */ + if (stat & SAFE_INT_PE_ERROR) { + printk("%s: dmaerr dmastat %08x\n", device_get_nameunit(sc->sc_dev), + (int)READ_REG(sc, SAFE_PE_DMASTAT)); + safestats.st_dmaerr++; + safe_totalreset(sc); +#if 0 + safe_feed(sc); +#endif + } + + if (sc->sc_needwakeup) { /* XXX check high watermark */ + int wakeup = sc->sc_needwakeup & (CRYPTO_SYMQ|CRYPTO_ASYMQ); + DPRINTF(("%s: wakeup crypto %x\n", __func__, + sc->sc_needwakeup)); + sc->sc_needwakeup &= ~wakeup; + crypto_unblock(sc->sc_cid, wakeup); + } + + return IRQ_HANDLED; +} + +/* + * safe_feed() - post a request to chip + */ +static void +safe_feed(struct safe_softc *sc, struct safe_ringentry *re) +{ + DPRINTF(("%s()\n", __FUNCTION__)); +#ifdef SAFE_DEBUG + if (debug) { + safe_dump_ringstate(sc, __func__); + safe_dump_request(sc, __func__, re); + } +#endif + sc->sc_nqchip++; + if (sc->sc_nqchip > safestats.st_maxqchip) + safestats.st_maxqchip = sc->sc_nqchip; + /* poke h/w to check descriptor ring, any value can be written */ + WRITE_REG(sc, SAFE_HI_RD_DESCR, 0); +} + +#define N(a) (sizeof(a) / sizeof (a[0])) +static void +safe_setup_enckey(struct safe_session *ses, caddr_t key) +{ + int i; + + bcopy(key, ses->ses_key, ses->ses_klen / 8); + + /* PE is little-endian, insure proper byte order */ + for (i = 0; i < N(ses->ses_key); i++) + ses->ses_key[i] = htole32(ses->ses_key[i]); +} + +static void +safe_setup_mackey(struct safe_session *ses, int algo, caddr_t key, int klen) +{ +#ifdef HMAC_HACK + MD5_CTX md5ctx; + SHA1_CTX sha1ctx; + int i; + + + for (i = 0; i < klen; i++) + key[i] ^= HMAC_IPAD_VAL; + + if (algo == CRYPTO_MD5_HMAC) { + MD5Init(&md5ctx); + MD5Update(&md5ctx, key, klen); + MD5Update(&md5ctx, hmac_ipad_buffer, MD5_HMAC_BLOCK_LEN - klen); + bcopy(md5ctx.md5_st8, ses->ses_hminner, sizeof(md5ctx.md5_st8)); + } else { + SHA1Init(&sha1ctx); + SHA1Update(&sha1ctx, key, klen); + SHA1Update(&sha1ctx, hmac_ipad_buffer, + SHA1_HMAC_BLOCK_LEN - klen); + bcopy(sha1ctx.h.b32, ses->ses_hminner, sizeof(sha1ctx.h.b32)); + } + + for (i = 0; i < klen; i++) + key[i] ^= (HMAC_IPAD_VAL ^ HMAC_OPAD_VAL); + + if (algo == CRYPTO_MD5_HMAC) { + MD5Init(&md5ctx); + MD5Update(&md5ctx, key, klen); + MD5Update(&md5ctx, hmac_opad_buffer, MD5_HMAC_BLOCK_LEN - klen); + bcopy(md5ctx.md5_st8, ses->ses_hmouter, sizeof(md5ctx.md5_st8)); + } else { + SHA1Init(&sha1ctx); + SHA1Update(&sha1ctx, key, klen); + SHA1Update(&sha1ctx, hmac_opad_buffer, + SHA1_HMAC_BLOCK_LEN - klen); + bcopy(sha1ctx.h.b32, ses->ses_hmouter, sizeof(sha1ctx.h.b32)); + } + + for (i = 0; i < klen; i++) + key[i] ^= HMAC_OPAD_VAL; + +#if 0 + /* + * this code prevents SHA working on a BE host, + * so it is obviously wrong. I think the byte + * swap setup we do with the chip fixes this for us + */ + + /* PE is little-endian, insure proper byte order */ + for (i = 0; i < N(ses->ses_hminner); i++) { + ses->ses_hminner[i] = htole32(ses->ses_hminner[i]); + ses->ses_hmouter[i] = htole32(ses->ses_hmouter[i]); + } +#endif +#else /* HMAC_HACK */ + printk("safe: md5/sha not implemented\n"); +#endif /* HMAC_HACK */ +} +#undef N + +/* + * Allocate a new 'session' and return an encoded session id. 'sidp' + * contains our registration id, and should contain an encoded session + * id on successful allocation. + */ +static int +safe_newsession(device_t dev, u_int32_t *sidp, struct cryptoini *cri) +{ + struct safe_softc *sc = device_get_softc(dev); + struct cryptoini *c, *encini = NULL, *macini = NULL; + struct safe_session *ses = NULL; + int sesn; + + DPRINTF(("%s()\n", __FUNCTION__)); + + if (sidp == NULL || cri == NULL || sc == NULL) + return (EINVAL); + + for (c = cri; c != NULL; c = c->cri_next) { + if (c->cri_alg == CRYPTO_MD5_HMAC || + c->cri_alg == CRYPTO_SHA1_HMAC || + c->cri_alg == CRYPTO_NULL_HMAC) { + if (macini) + return (EINVAL); + macini = c; + } else if (c->cri_alg == CRYPTO_DES_CBC || + c->cri_alg == CRYPTO_3DES_CBC || + c->cri_alg == CRYPTO_AES_CBC || + c->cri_alg == CRYPTO_NULL_CBC) { + if (encini) + return (EINVAL); + encini = c; + } else + return (EINVAL); + } + if (encini == NULL && macini == NULL) + return (EINVAL); + if (encini) { /* validate key length */ + switch (encini->cri_alg) { + case CRYPTO_DES_CBC: + if (encini->cri_klen != 64) + return (EINVAL); + break; + case CRYPTO_3DES_CBC: + if (encini->cri_klen != 192) + return (EINVAL); + break; + case CRYPTO_AES_CBC: + if (encini->cri_klen != 128 && + encini->cri_klen != 192 && + encini->cri_klen != 256) + return (EINVAL); + break; + } + } + + if (sc->sc_sessions == NULL) { + ses = sc->sc_sessions = (struct safe_session *) + kmalloc(sizeof(struct safe_session), SLAB_ATOMIC); + if (ses == NULL) + return (ENOMEM); + memset(ses, 0, sizeof(struct safe_session)); + sesn = 0; + sc->sc_nsessions = 1; + } else { + for (sesn = 0; sesn < sc->sc_nsessions; sesn++) { + if (sc->sc_sessions[sesn].ses_used == 0) { + ses = &sc->sc_sessions[sesn]; + break; + } + } + + if (ses == NULL) { + sesn = sc->sc_nsessions; + ses = (struct safe_session *) + kmalloc((sesn + 1) * sizeof(struct safe_session), SLAB_ATOMIC); + if (ses == NULL) + return (ENOMEM); + memset(ses, 0, (sesn + 1) * sizeof(struct safe_session)); + bcopy(sc->sc_sessions, ses, sesn * + sizeof(struct safe_session)); + bzero(sc->sc_sessions, sesn * + sizeof(struct safe_session)); + kfree(sc->sc_sessions); + sc->sc_sessions = ses; + ses = &sc->sc_sessions[sesn]; + sc->sc_nsessions++; + } + } + + bzero(ses, sizeof(struct safe_session)); + ses->ses_used = 1; + + if (encini) { + /* get an IV */ + /* XXX may read fewer than requested */ + read_random(ses->ses_iv, sizeof(ses->ses_iv)); + + ses->ses_klen = encini->cri_klen; + if (encini->cri_key != NULL) + safe_setup_enckey(ses, encini->cri_key); + } + + if (macini) { + ses->ses_mlen = macini->cri_mlen; + if (ses->ses_mlen == 0) { + if (macini->cri_alg == CRYPTO_MD5_HMAC) + ses->ses_mlen = MD5_HASH_LEN; + else + ses->ses_mlen = SHA1_HASH_LEN; + } + + if (macini->cri_key != NULL) { + safe_setup_mackey(ses, macini->cri_alg, macini->cri_key, + macini->cri_klen / 8); + } + } + + *sidp = SAFE_SID(device_get_unit(sc->sc_dev), sesn); + return (0); +} + +/* + * Deallocate a session. + */ +static int +safe_freesession(device_t dev, u_int64_t tid) +{ + struct safe_softc *sc = device_get_softc(dev); + int session, ret; + u_int32_t sid = ((u_int32_t) tid) & 0xffffffff; + + DPRINTF(("%s()\n", __FUNCTION__)); + + if (sc == NULL) + return (EINVAL); + + session = SAFE_SESSION(sid); + if (session < sc->sc_nsessions) { + bzero(&sc->sc_sessions[session], sizeof(sc->sc_sessions[session])); + ret = 0; + } else + ret = EINVAL; + return (ret); +} + + +static int +safe_process(device_t dev, struct cryptop *crp, int hint) +{ + struct safe_softc *sc = device_get_softc(dev); + int err = 0, i, nicealign, uniform; + struct cryptodesc *crd1, *crd2, *maccrd, *enccrd; + int bypass, oplen, ivsize; + caddr_t iv; + int16_t coffset; + struct safe_session *ses; + struct safe_ringentry *re; + struct safe_sarec *sa; + struct safe_pdesc *pd; + u_int32_t cmd0, cmd1, staterec; + unsigned long flags; + + DPRINTF(("%s()\n", __FUNCTION__)); + + if (crp == NULL || crp->crp_callback == NULL || sc == NULL) { + safestats.st_invalid++; + return (EINVAL); + } + if (SAFE_SESSION(crp->crp_sid) >= sc->sc_nsessions) { + safestats.st_badsession++; + return (EINVAL); + } + + spin_lock_irqsave(&sc->sc_ringmtx, flags); + if (sc->sc_front == sc->sc_back && sc->sc_nqchip != 0) { + safestats.st_ringfull++; + sc->sc_needwakeup |= CRYPTO_SYMQ; + spin_unlock_irqrestore(&sc->sc_ringmtx, flags); + return (ERESTART); + } + re = sc->sc_front; + + staterec = re->re_sa.sa_staterec; /* save */ + /* NB: zero everything but the PE descriptor */ + bzero(&re->re_sa, sizeof(struct safe_ringentry) - sizeof(re->re_desc)); + re->re_sa.sa_staterec = staterec; /* restore */ + + re->re_crp = crp; + re->re_sesn = SAFE_SESSION(crp->crp_sid); + + re->re_src.nsegs = 0; + re->re_dst.nsegs = 0; + + if (crp->crp_flags & CRYPTO_F_SKBUF) { + re->re_src_skb = (struct sk_buff *)crp->crp_buf; + re->re_dst_skb = (struct sk_buff *)crp->crp_buf; + } else if (crp->crp_flags & CRYPTO_F_IOV) { + re->re_src_io = (struct uio *)crp->crp_buf; + re->re_dst_io = (struct uio *)crp->crp_buf; + } else { + safestats.st_badflags++; + err = EINVAL; + goto errout; /* XXX we don't handle contiguous blocks! */ + } + + sa = &re->re_sa; + ses = &sc->sc_sessions[re->re_sesn]; + + crd1 = crp->crp_desc; + if (crd1 == NULL) { + safestats.st_nodesc++; + err = EINVAL; + goto errout; + } + crd2 = crd1->crd_next; + + cmd0 = SAFE_SA_CMD0_BASIC; /* basic group operation */ + cmd1 = 0; + if (crd2 == NULL) { + if (crd1->crd_alg == CRYPTO_MD5_HMAC || + crd1->crd_alg == CRYPTO_SHA1_HMAC || + crd1->crd_alg == CRYPTO_NULL_HMAC) { + maccrd = crd1; + enccrd = NULL; + cmd0 |= SAFE_SA_CMD0_OP_HASH; + } else if (crd1->crd_alg == CRYPTO_DES_CBC || + crd1->crd_alg == CRYPTO_3DES_CBC || + crd1->crd_alg == CRYPTO_AES_CBC || + crd1->crd_alg == CRYPTO_NULL_CBC) { + maccrd = NULL; + enccrd = crd1; + cmd0 |= SAFE_SA_CMD0_OP_CRYPT; + } else { + safestats.st_badalg++; + err = EINVAL; + goto errout; + } + } else { + if ((crd1->crd_alg == CRYPTO_MD5_HMAC || + crd1->crd_alg == CRYPTO_SHA1_HMAC || + crd1->crd_alg == CRYPTO_NULL_HMAC) && + (crd2->crd_alg == CRYPTO_DES_CBC || + crd2->crd_alg == CRYPTO_3DES_CBC || + crd2->crd_alg == CRYPTO_AES_CBC || + crd2->crd_alg == CRYPTO_NULL_CBC) && + ((crd2->crd_flags & CRD_F_ENCRYPT) == 0)) { + maccrd = crd1; + enccrd = crd2; + } else if ((crd1->crd_alg == CRYPTO_DES_CBC || + crd1->crd_alg == CRYPTO_3DES_CBC || + crd1->crd_alg == CRYPTO_AES_CBC || + crd1->crd_alg == CRYPTO_NULL_CBC) && + (crd2->crd_alg == CRYPTO_MD5_HMAC || + crd2->crd_alg == CRYPTO_SHA1_HMAC || + crd2->crd_alg == CRYPTO_NULL_HMAC) && + (crd1->crd_flags & CRD_F_ENCRYPT)) { + enccrd = crd1; + maccrd = crd2; + } else { + safestats.st_badalg++; + err = EINVAL; + goto errout; + } + cmd0 |= SAFE_SA_CMD0_OP_BOTH; + } + + if (enccrd) { + if (enccrd->crd_flags & CRD_F_KEY_EXPLICIT) + safe_setup_enckey(ses, enccrd->crd_key); + + if (enccrd->crd_alg == CRYPTO_DES_CBC) { + cmd0 |= SAFE_SA_CMD0_DES; + cmd1 |= SAFE_SA_CMD1_CBC; + ivsize = 2*sizeof(u_int32_t); + } else if (enccrd->crd_alg == CRYPTO_3DES_CBC) { + cmd0 |= SAFE_SA_CMD0_3DES; + cmd1 |= SAFE_SA_CMD1_CBC; + ivsize = 2*sizeof(u_int32_t); + } else if (enccrd->crd_alg == CRYPTO_AES_CBC) { + cmd0 |= SAFE_SA_CMD0_AES; + cmd1 |= SAFE_SA_CMD1_CBC; + if (ses->ses_klen == 128) + cmd1 |= SAFE_SA_CMD1_AES128; + else if (ses->ses_klen == 192) + cmd1 |= SAFE_SA_CMD1_AES192; + else + cmd1 |= SAFE_SA_CMD1_AES256; + ivsize = 4*sizeof(u_int32_t); + } else { + cmd0 |= SAFE_SA_CMD0_CRYPT_NULL; + ivsize = 0; + } + + /* + * Setup encrypt/decrypt state. When using basic ops + * we can't use an inline IV because hash/crypt offset + * must be from the end of the IV to the start of the + * crypt data and this leaves out the preceding header + * from the hash calculation. Instead we place the IV + * in the state record and set the hash/crypt offset to + * copy both the header+IV. + */ + if (enccrd->crd_flags & CRD_F_ENCRYPT) { + cmd0 |= SAFE_SA_CMD0_OUTBOUND; + + if (enccrd->crd_flags & CRD_F_IV_EXPLICIT) + iv = enccrd->crd_iv; + else + iv = (caddr_t) ses->ses_iv; + if ((enccrd->crd_flags & CRD_F_IV_PRESENT) == 0) { + crypto_copyback(crp->crp_flags, crp->crp_buf, + enccrd->crd_inject, ivsize, iv); + } + bcopy(iv, re->re_sastate.sa_saved_iv, ivsize); + /* make iv LE */ + for (i = 0; i < ivsize/sizeof(re->re_sastate.sa_saved_iv[0]); i++) + re->re_sastate.sa_saved_iv[i] = + cpu_to_le32(re->re_sastate.sa_saved_iv[i]); + cmd0 |= SAFE_SA_CMD0_IVLD_STATE | SAFE_SA_CMD0_SAVEIV; + re->re_flags |= SAFE_QFLAGS_COPYOUTIV; + } else { + cmd0 |= SAFE_SA_CMD0_INBOUND; + + if (enccrd->crd_flags & CRD_F_IV_EXPLICIT) { + bcopy(enccrd->crd_iv, + re->re_sastate.sa_saved_iv, ivsize); + } else { + crypto_copydata(crp->crp_flags, crp->crp_buf, + enccrd->crd_inject, ivsize, + (caddr_t)re->re_sastate.sa_saved_iv); + } + /* make iv LE */ + for (i = 0; i < ivsize/sizeof(re->re_sastate.sa_saved_iv[0]); i++) + re->re_sastate.sa_saved_iv[i] = + cpu_to_le32(re->re_sastate.sa_saved_iv[i]); + cmd0 |= SAFE_SA_CMD0_IVLD_STATE; + } + /* + * For basic encryption use the zero pad algorithm. + * This pads results to an 8-byte boundary and + * suppresses padding verification for inbound (i.e. + * decrypt) operations. + * + * NB: Not sure if the 8-byte pad boundary is a problem. + */ + cmd0 |= SAFE_SA_CMD0_PAD_ZERO; + + /* XXX assert key bufs have the same size */ + bcopy(ses->ses_key, sa->sa_key, sizeof(sa->sa_key)); + } + + if (maccrd) { + if (maccrd->crd_flags & CRD_F_KEY_EXPLICIT) { + safe_setup_mackey(ses, maccrd->crd_alg, + maccrd->crd_key, maccrd->crd_klen / 8); + } + + if (maccrd->crd_alg == CRYPTO_MD5_HMAC) { + cmd0 |= SAFE_SA_CMD0_MD5; + cmd1 |= SAFE_SA_CMD1_HMAC; /* NB: enable HMAC */ + } else if (maccrd->crd_alg == CRYPTO_SHA1_HMAC) { + cmd0 |= SAFE_SA_CMD0_SHA1; + cmd1 |= SAFE_SA_CMD1_HMAC; /* NB: enable HMAC */ + } else { + cmd0 |= SAFE_SA_CMD0_HASH_NULL; + } + /* + * Digest data is loaded from the SA and the hash + * result is saved to the state block where we + * retrieve it for return to the caller. + */ + /* XXX assert digest bufs have the same size */ + bcopy(ses->ses_hminner, sa->sa_indigest, + sizeof(sa->sa_indigest)); + bcopy(ses->ses_hmouter, sa->sa_outdigest, + sizeof(sa->sa_outdigest)); + + cmd0 |= SAFE_SA_CMD0_HSLD_SA | SAFE_SA_CMD0_SAVEHASH; + re->re_flags |= SAFE_QFLAGS_COPYOUTICV; + } + + if (enccrd && maccrd) { + /* + * The offset from hash data to the start of + * crypt data is the difference in the skips. + */ + bypass = maccrd->crd_skip; + coffset = enccrd->crd_skip - maccrd->crd_skip; + if (coffset < 0) { + DPRINTF(("%s: hash does not precede crypt; " + "mac skip %u enc skip %u\n", + __func__, maccrd->crd_skip, enccrd->crd_skip)); + safestats.st_skipmismatch++; + err = EINVAL; + goto errout; + } + oplen = enccrd->crd_skip + enccrd->crd_len; + if (maccrd->crd_skip + maccrd->crd_len != oplen) { + DPRINTF(("%s: hash amount %u != crypt amount %u\n", + __func__, maccrd->crd_skip + maccrd->crd_len, + oplen)); + safestats.st_lenmismatch++; + err = EINVAL; + goto errout; + } +#ifdef SAFE_DEBUG + if (debug) { + printf("mac: skip %d, len %d, inject %d\n", + maccrd->crd_skip, maccrd->crd_len, + maccrd->crd_inject); + printf("enc: skip %d, len %d, inject %d\n", + enccrd->crd_skip, enccrd->crd_len, + enccrd->crd_inject); + printf("bypass %d coffset %d oplen %d\n", + bypass, coffset, oplen); + } +#endif + if (coffset & 3) { /* offset must be 32-bit aligned */ + DPRINTF(("%s: coffset %u misaligned\n", + __func__, coffset)); + safestats.st_coffmisaligned++; + err = EINVAL; + goto errout; + } + coffset >>= 2; + if (coffset > 255) { /* offset must be <256 dwords */ + DPRINTF(("%s: coffset %u too big\n", + __func__, coffset)); + safestats.st_cofftoobig++; + err = EINVAL; + goto errout; + } + /* + * Tell the hardware to copy the header to the output. + * The header is defined as the data from the end of + * the bypass to the start of data to be encrypted. + * Typically this is the inline IV. Note that you need + * to do this even if src+dst are the same; it appears + * that w/o this bit the crypted data is written + * immediately after the bypass data. + */ + cmd1 |= SAFE_SA_CMD1_HDRCOPY; + /* + * Disable IP header mutable bit handling. This is + * needed to get correct HMAC calculations. + */ + cmd1 |= SAFE_SA_CMD1_MUTABLE; + } else { + if (enccrd) { + bypass = enccrd->crd_skip; + oplen = bypass + enccrd->crd_len; + } else { + bypass = maccrd->crd_skip; + oplen = bypass + maccrd->crd_len; + } + coffset = 0; + } + /* XXX verify multiple of 4 when using s/g */ + if (bypass > 96) { /* bypass offset must be <= 96 bytes */ + DPRINTF(("%s: bypass %u too big\n", __func__, bypass)); + safestats.st_bypasstoobig++; + err = EINVAL; + goto errout; + } + + if (crp->crp_flags & CRYPTO_F_SKBUF) { + if (pci_map_skb(sc, &re->re_src, re->re_src_skb)) { + safestats.st_noload++; + err = ENOMEM; + goto errout; + } + } else if (crp->crp_flags & CRYPTO_F_IOV) { + if (pci_map_uio(sc, &re->re_src, re->re_src_io)) { + safestats.st_noload++; + err = ENOMEM; + goto errout; + } + } + nicealign = safe_dmamap_aligned(sc, &re->re_src); + uniform = safe_dmamap_uniform(sc, &re->re_src); + + DPRINTF(("src nicealign %u uniform %u nsegs %u\n", + nicealign, uniform, re->re_src.nsegs)); + if (re->re_src.nsegs > 1) { + re->re_desc.d_src = sc->sc_spalloc.dma_paddr + + ((caddr_t) sc->sc_spfree - (caddr_t) sc->sc_spring); + for (i = 0; i < re->re_src_nsegs; i++) { + /* NB: no need to check if there's space */ + pd = sc->sc_spfree; + if (++(sc->sc_spfree) == sc->sc_springtop) + sc->sc_spfree = sc->sc_spring; + + KASSERT((pd->pd_flags&3) == 0 || + (pd->pd_flags&3) == SAFE_PD_DONE, + ("bogus source particle descriptor; flags %x", + pd->pd_flags)); + pd->pd_addr = re->re_src_segs[i].ds_addr; + pd->pd_size = re->re_src_segs[i].ds_len; + pd->pd_flags = SAFE_PD_READY; + } + cmd0 |= SAFE_SA_CMD0_IGATHER; + } else { + /* + * No need for gather, reference the operand directly. + */ + re->re_desc.d_src = re->re_src_segs[0].ds_addr; + } + + if (enccrd == NULL && maccrd != NULL) { + /* + * Hash op; no destination needed. + */ + } else { + if (crp->crp_flags & (CRYPTO_F_IOV|CRYPTO_F_SKBUF)) { + if (!nicealign) { + safestats.st_iovmisaligned++; + err = EINVAL; + goto errout; + } + if (uniform != 1) { + device_printf(sc->sc_dev, "!uniform source\n"); + if (!uniform) { + /* + * There's no way to handle the DMA + * requirements with this uio. We + * could create a separate DMA area for + * the result and then copy it back, + * but for now we just bail and return + * an error. Note that uio requests + * > SAFE_MAX_DSIZE are handled because + * the DMA map and segment list for the + * destination wil result in a + * destination particle list that does + * the necessary scatter DMA. + */ + safestats.st_iovnotuniform++; + err = EINVAL; + goto errout; + } + } else + re->re_dst = re->re_src; + } else { + safestats.st_badflags++; + err = EINVAL; + goto errout; + } + + if (re->re_dst.nsegs > 1) { + re->re_desc.d_dst = sc->sc_dpalloc.dma_paddr + + ((caddr_t) sc->sc_dpfree - (caddr_t) sc->sc_dpring); + for (i = 0; i < re->re_dst_nsegs; i++) { + pd = sc->sc_dpfree; + KASSERT((pd->pd_flags&3) == 0 || + (pd->pd_flags&3) == SAFE_PD_DONE, + ("bogus dest particle descriptor; flags %x", + pd->pd_flags)); + if (++(sc->sc_dpfree) == sc->sc_dpringtop) + sc->sc_dpfree = sc->sc_dpring; + pd->pd_addr = re->re_dst_segs[i].ds_addr; + pd->pd_flags = SAFE_PD_READY; + } + cmd0 |= SAFE_SA_CMD0_OSCATTER; + } else { + /* + * No need for scatter, reference the operand directly. + */ + re->re_desc.d_dst = re->re_dst_segs[0].ds_addr; + } + } + + /* + * All done with setup; fillin the SA command words + * and the packet engine descriptor. The operation + * is now ready for submission to the hardware. + */ + sa->sa_cmd0 = cmd0 | SAFE_SA_CMD0_IPCI | SAFE_SA_CMD0_OPCI; + sa->sa_cmd1 = cmd1 + | (coffset << SAFE_SA_CMD1_OFFSET_S) + | SAFE_SA_CMD1_SAREV1 /* Rev 1 SA data structure */ + | SAFE_SA_CMD1_SRPCI + ; + /* + * NB: the order of writes is important here. In case the + * chip is scanning the ring because of an outstanding request + * it might nab this one too. In that case we need to make + * sure the setup is complete before we write the length + * field of the descriptor as it signals the descriptor is + * ready for processing. + */ + re->re_desc.d_csr = SAFE_PE_CSR_READY | SAFE_PE_CSR_SAPCI; + if (maccrd) + re->re_desc.d_csr |= SAFE_PE_CSR_LOADSA | SAFE_PE_CSR_HASHFINAL; + wmb(); + re->re_desc.d_len = oplen + | SAFE_PE_LEN_READY + | (bypass << SAFE_PE_LEN_BYPASS_S) + ; + + safestats.st_ipackets++; + safestats.st_ibytes += oplen; + + if (++(sc->sc_front) == sc->sc_ringtop) + sc->sc_front = sc->sc_ring; + + /* XXX honor batching */ + safe_feed(sc, re); + spin_unlock_irqrestore(&sc->sc_ringmtx, flags); + return (0); + +errout: + if (re->re_src.map != re->re_dst.map) + pci_unmap_operand(sc, &re->re_dst); + if (re->re_src.map) + pci_unmap_operand(sc, &re->re_src); + spin_unlock_irqrestore(&sc->sc_ringmtx, flags); + if (err != ERESTART) { + crp->crp_etype = err; + crypto_done(crp); + } else { + sc->sc_needwakeup |= CRYPTO_SYMQ; + } + return (err); +} + +static void +safe_callback(struct safe_softc *sc, struct safe_ringentry *re) +{ + struct cryptop *crp = (struct cryptop *)re->re_crp; + struct cryptodesc *crd; + + DPRINTF(("%s()\n", __FUNCTION__)); + + safestats.st_opackets++; + safestats.st_obytes += re->re_dst.mapsize; + + if (re->re_desc.d_csr & SAFE_PE_CSR_STATUS) { + device_printf(sc->sc_dev, "csr 0x%x cmd0 0x%x cmd1 0x%x\n", + re->re_desc.d_csr, + re->re_sa.sa_cmd0, re->re_sa.sa_cmd1); + safestats.st_peoperr++; + crp->crp_etype = EIO; /* something more meaningful? */ + } + + if (re->re_dst.map != NULL && re->re_dst.map != re->re_src.map) + pci_unmap_operand(sc, &re->re_dst); + pci_unmap_operand(sc, &re->re_src); + + /* + * If result was written to a differet mbuf chain, swap + * it in as the return value and reclaim the original. + */ + if ((crp->crp_flags & CRYPTO_F_SKBUF) && re->re_src_skb != re->re_dst_skb) { + device_printf(sc->sc_dev, "no CRYPTO_F_SKBUF swapping support\n"); + /* kfree_skb(skb) */ + /* crp->crp_buf = (caddr_t)re->re_dst_skb */ + return; + } + + if (re->re_flags & SAFE_QFLAGS_COPYOUTIV) { + /* copy out IV for future use */ + for (crd = crp->crp_desc; crd; crd = crd->crd_next) { + int i; + int ivsize; + + if (crd->crd_alg == CRYPTO_DES_CBC || + crd->crd_alg == CRYPTO_3DES_CBC) { + ivsize = 2*sizeof(u_int32_t); + } else if (crd->crd_alg == CRYPTO_AES_CBC) { + ivsize = 4*sizeof(u_int32_t); + } else + continue; + crypto_copydata(crp->crp_flags, crp->crp_buf, + crd->crd_skip + crd->crd_len - ivsize, ivsize, + (caddr_t)sc->sc_sessions[re->re_sesn].ses_iv); + for (i = 0; + i < ivsize/sizeof(sc->sc_sessions[re->re_sesn].ses_iv[0]); + i++) + sc->sc_sessions[re->re_sesn].ses_iv[i] = + cpu_to_le32(sc->sc_sessions[re->re_sesn].ses_iv[i]); + break; + } + } + + if (re->re_flags & SAFE_QFLAGS_COPYOUTICV) { + /* copy out ICV result */ + for (crd = crp->crp_desc; crd; crd = crd->crd_next) { + if (!(crd->crd_alg == CRYPTO_MD5_HMAC || + crd->crd_alg == CRYPTO_SHA1_HMAC || + crd->crd_alg == CRYPTO_NULL_HMAC)) + continue; + if (crd->crd_alg == CRYPTO_SHA1_HMAC) { + /* + * SHA-1 ICV's are byte-swapped; fix 'em up + * before copy them to their destination. + */ + re->re_sastate.sa_saved_indigest[0] = + cpu_to_be32(re->re_sastate.sa_saved_indigest[0]); + re->re_sastate.sa_saved_indigest[1] = + cpu_to_be32(re->re_sastate.sa_saved_indigest[1]); + re->re_sastate.sa_saved_indigest[2] = + cpu_to_be32(re->re_sastate.sa_saved_indigest[2]); + } else { + re->re_sastate.sa_saved_indigest[0] = + cpu_to_le32(re->re_sastate.sa_saved_indigest[0]); + re->re_sastate.sa_saved_indigest[1] = + cpu_to_le32(re->re_sastate.sa_saved_indigest[1]); + re->re_sastate.sa_saved_indigest[2] = + cpu_to_le32(re->re_sastate.sa_saved_indigest[2]); + } + crypto_copyback(crp->crp_flags, crp->crp_buf, + crd->crd_inject, + sc->sc_sessions[re->re_sesn].ses_mlen, + (caddr_t)re->re_sastate.sa_saved_indigest); + break; + } + } + crypto_done(crp); +} + + +#if defined(CONFIG_OCF_RANDOMHARVEST) && !defined(SAFE_NO_RNG) +#define SAFE_RNG_MAXWAIT 1000 + +static void +safe_rng_init(struct safe_softc *sc) +{ + u_int32_t w, v; + int i; + + DPRINTF(("%s()\n", __FUNCTION__)); + + WRITE_REG(sc, SAFE_RNG_CTRL, 0); + /* use default value according to the manual */ + WRITE_REG(sc, SAFE_RNG_CNFG, 0x834); /* magic from SafeNet */ + WRITE_REG(sc, SAFE_RNG_ALM_CNT, 0); + + /* + * There is a bug in rev 1.0 of the 1140 that when the RNG + * is brought out of reset the ready status flag does not + * work until the RNG has finished its internal initialization. + * + * So in order to determine the device is through its + * initialization we must read the data register, using the + * status reg in the read in case it is initialized. Then read + * the data register until it changes from the first read. + * Once it changes read the data register until it changes + * again. At this time the RNG is considered initialized. + * This could take between 750ms - 1000ms in time. + */ + i = 0; + w = READ_REG(sc, SAFE_RNG_OUT); + do { + v = READ_REG(sc, SAFE_RNG_OUT); + if (v != w) { + w = v; + break; + } + DELAY(10); + } while (++i < SAFE_RNG_MAXWAIT); + + /* Wait Until data changes again */ + i = 0; + do { + v = READ_REG(sc, SAFE_RNG_OUT); + if (v != w) + break; + DELAY(10); + } while (++i < SAFE_RNG_MAXWAIT); +} + +static __inline void +safe_rng_disable_short_cycle(struct safe_softc *sc) +{ + DPRINTF(("%s()\n", __FUNCTION__)); + + WRITE_REG(sc, SAFE_RNG_CTRL, + READ_REG(sc, SAFE_RNG_CTRL) &~ SAFE_RNG_CTRL_SHORTEN); +} + +static __inline void +safe_rng_enable_short_cycle(struct safe_softc *sc) +{ + DPRINTF(("%s()\n", __FUNCTION__)); + + WRITE_REG(sc, SAFE_RNG_CTRL, + READ_REG(sc, SAFE_RNG_CTRL) | SAFE_RNG_CTRL_SHORTEN); +} + +static __inline u_int32_t +safe_rng_read(struct safe_softc *sc) +{ + int i; + + i = 0; + while (READ_REG(sc, SAFE_RNG_STAT) != 0 && ++i < SAFE_RNG_MAXWAIT) + ; + return READ_REG(sc, SAFE_RNG_OUT); +} + +static int +safe_read_random(void *arg, u_int32_t *buf, int maxwords) +{ + struct safe_softc *sc = (struct safe_softc *) arg; + int i, rc; + + DPRINTF(("%s()\n", __FUNCTION__)); + + safestats.st_rng++; + /* + * Fetch the next block of data. + */ + if (maxwords > safe_rngbufsize) + maxwords = safe_rngbufsize; + if (maxwords > SAFE_RNG_MAXBUFSIZ) + maxwords = SAFE_RNG_MAXBUFSIZ; +retry: + /* read as much as we can */ + for (rc = 0; rc < maxwords; rc++) { + if (READ_REG(sc, SAFE_RNG_STAT) != 0) + break; + buf[rc] = READ_REG(sc, SAFE_RNG_OUT); + } + if (rc == 0) + return 0; + /* + * Check the comparator alarm count and reset the h/w if + * it exceeds our threshold. This guards against the + * hardware oscillators resonating with external signals. + */ + if (READ_REG(sc, SAFE_RNG_ALM_CNT) > safe_rngmaxalarm) { + u_int32_t freq_inc, w; + + DPRINTF(("%s: alarm count %u exceeds threshold %u\n", __func__, + (unsigned)READ_REG(sc, SAFE_RNG_ALM_CNT), safe_rngmaxalarm)); + safestats.st_rngalarm++; + safe_rng_enable_short_cycle(sc); + freq_inc = 18; + for (i = 0; i < 64; i++) { + w = READ_REG(sc, SAFE_RNG_CNFG); + freq_inc = ((w + freq_inc) & 0x3fL); + w = ((w & ~0x3fL) | freq_inc); + WRITE_REG(sc, SAFE_RNG_CNFG, w); + + WRITE_REG(sc, SAFE_RNG_ALM_CNT, 0); + + (void) safe_rng_read(sc); + DELAY(25); + + if (READ_REG(sc, SAFE_RNG_ALM_CNT) == 0) { + safe_rng_disable_short_cycle(sc); + goto retry; + } + freq_inc = 1; + } + safe_rng_disable_short_cycle(sc); + } else + WRITE_REG(sc, SAFE_RNG_ALM_CNT, 0); + + return(rc); +} +#endif /* defined(CONFIG_OCF_RANDOMHARVEST) && !defined(SAFE_NO_RNG) */ + + +/* + * Resets the board. Values in the regesters are left as is + * from the reset (i.e. initial values are assigned elsewhere). + */ +static void +safe_reset_board(struct safe_softc *sc) +{ + u_int32_t v; + /* + * Reset the device. The manual says no delay + * is needed between marking and clearing reset. + */ + DPRINTF(("%s()\n", __FUNCTION__)); + + v = READ_REG(sc, SAFE_PE_DMACFG) &~ + (SAFE_PE_DMACFG_PERESET | SAFE_PE_DMACFG_PDRRESET | + SAFE_PE_DMACFG_SGRESET); + WRITE_REG(sc, SAFE_PE_DMACFG, v + | SAFE_PE_DMACFG_PERESET + | SAFE_PE_DMACFG_PDRRESET + | SAFE_PE_DMACFG_SGRESET); + WRITE_REG(sc, SAFE_PE_DMACFG, v); +} + +/* + * Initialize registers we need to touch only once. + */ +static void +safe_init_board(struct safe_softc *sc) +{ + u_int32_t v, dwords; + + DPRINTF(("%s()\n", __FUNCTION__)); + + v = READ_REG(sc, SAFE_PE_DMACFG); + v &=~ ( SAFE_PE_DMACFG_PEMODE + | SAFE_PE_DMACFG_FSENA /* failsafe enable */ + | SAFE_PE_DMACFG_GPRPCI /* gather ring on PCI */ + | SAFE_PE_DMACFG_SPRPCI /* scatter ring on PCI */ + | SAFE_PE_DMACFG_ESDESC /* endian-swap descriptors */ + | SAFE_PE_DMACFG_ESPDESC /* endian-swap part. desc's */ + | SAFE_PE_DMACFG_ESSA /* endian-swap SA's */ + | SAFE_PE_DMACFG_ESPACKET /* swap the packet data */ + ); + v |= SAFE_PE_DMACFG_FSENA /* failsafe enable */ + | SAFE_PE_DMACFG_GPRPCI /* gather ring on PCI */ + | SAFE_PE_DMACFG_SPRPCI /* scatter ring on PCI */ + | SAFE_PE_DMACFG_ESDESC /* endian-swap descriptors */ + | SAFE_PE_DMACFG_ESPDESC /* endian-swap part. desc's */ + | SAFE_PE_DMACFG_ESSA /* endian-swap SA's */ +#if 0 + | SAFE_PE_DMACFG_ESPACKET /* swap the packet data */ +#endif + ; + WRITE_REG(sc, SAFE_PE_DMACFG, v); + +#ifdef __BIG_ENDIAN + /* tell the safenet that we are 4321 and not 1234 */ + WRITE_REG(sc, SAFE_ENDIAN, 0xe4e41b1b); +#endif + + if (sc->sc_chiprev == SAFE_REV(1,0)) { + /* + * Avoid large PCI DMA transfers. Rev 1.0 has a bug where + * "target mode transfers" done while the chip is DMA'ing + * >1020 bytes cause the hardware to lockup. To avoid this + * we reduce the max PCI transfer size and use small source + * particle descriptors (<= 256 bytes). + */ + WRITE_REG(sc, SAFE_DMA_CFG, 256); + device_printf(sc->sc_dev, + "Reduce max DMA size to %u words for rev %u.%u WAR\n", + (unsigned) ((READ_REG(sc, SAFE_DMA_CFG)>>2) & 0xff), + (unsigned) SAFE_REV_MAJ(sc->sc_chiprev), + (unsigned) SAFE_REV_MIN(sc->sc_chiprev)); + sc->sc_max_dsize = 256; + } else { + sc->sc_max_dsize = SAFE_MAX_DSIZE; + } + + /* NB: operands+results are overlaid */ + WRITE_REG(sc, SAFE_PE_PDRBASE, sc->sc_ringalloc.dma_paddr); + WRITE_REG(sc, SAFE_PE_RDRBASE, sc->sc_ringalloc.dma_paddr); + /* + * Configure ring entry size and number of items in the ring. + */ + KASSERT((sizeof(struct safe_ringentry) % sizeof(u_int32_t)) == 0, + ("PE ring entry not 32-bit aligned!")); + dwords = sizeof(struct safe_ringentry) / sizeof(u_int32_t); + WRITE_REG(sc, SAFE_PE_RINGCFG, + (dwords << SAFE_PE_RINGCFG_OFFSET_S) | SAFE_MAX_NQUEUE); + WRITE_REG(sc, SAFE_PE_RINGPOLL, 0); /* disable polling */ + + WRITE_REG(sc, SAFE_PE_GRNGBASE, sc->sc_spalloc.dma_paddr); + WRITE_REG(sc, SAFE_PE_SRNGBASE, sc->sc_dpalloc.dma_paddr); + WRITE_REG(sc, SAFE_PE_PARTSIZE, + (SAFE_TOTAL_DPART<<16) | SAFE_TOTAL_SPART); + /* + * NB: destination particles are fixed size. We use + * an mbuf cluster and require all results go to + * clusters or smaller. + */ + WRITE_REG(sc, SAFE_PE_PARTCFG, sc->sc_max_dsize); + + /* it's now safe to enable PE mode, do it */ + WRITE_REG(sc, SAFE_PE_DMACFG, v | SAFE_PE_DMACFG_PEMODE); + + /* + * Configure hardware to use level-triggered interrupts and + * to interrupt after each descriptor is processed. + */ + WRITE_REG(sc, SAFE_HI_CFG, SAFE_HI_CFG_LEVEL); + WRITE_REG(sc, SAFE_HI_CLR, 0xffffffff); + WRITE_REG(sc, SAFE_HI_DESC_CNT, 1); + WRITE_REG(sc, SAFE_HI_MASK, SAFE_INT_PE_DDONE | SAFE_INT_PE_ERROR); +} + + +/* + * Clean up after a chip crash. + * It is assumed that the caller in splimp() + */ +static void +safe_cleanchip(struct safe_softc *sc) +{ + DPRINTF(("%s()\n", __FUNCTION__)); + + if (sc->sc_nqchip != 0) { + struct safe_ringentry *re = sc->sc_back; + + while (re != sc->sc_front) { + if (re->re_desc.d_csr != 0) + safe_free_entry(sc, re); + if (++re == sc->sc_ringtop) + re = sc->sc_ring; + } + sc->sc_back = re; + sc->sc_nqchip = 0; + } +} + +/* + * free a safe_q + * It is assumed that the caller is within splimp(). + */ +static int +safe_free_entry(struct safe_softc *sc, struct safe_ringentry *re) +{ + struct cryptop *crp; + + DPRINTF(("%s()\n", __FUNCTION__)); + + /* + * Free header MCR + */ + if ((re->re_dst_skb != NULL) && (re->re_src_skb != re->re_dst_skb)) +#ifdef NOTYET + m_freem(re->re_dst_m); +#else + printk("%s,%d: SKB not supported\n", __FILE__, __LINE__); +#endif + + crp = (struct cryptop *)re->re_crp; + + re->re_desc.d_csr = 0; + + crp->crp_etype = EFAULT; + crypto_done(crp); + return(0); +} + +/* + * Routine to reset the chip and clean up. + * It is assumed that the caller is in splimp() + */ +static void +safe_totalreset(struct safe_softc *sc) +{ + DPRINTF(("%s()\n", __FUNCTION__)); + + safe_reset_board(sc); + safe_init_board(sc); + safe_cleanchip(sc); +} + +/* + * Is the operand suitable aligned for direct DMA. Each + * segment must be aligned on a 32-bit boundary and all + * but the last segment must be a multiple of 4 bytes. + */ +static int +safe_dmamap_aligned(struct safe_softc *sc, const struct safe_operand *op) +{ + int i; + + DPRINTF(("%s()\n", __FUNCTION__)); + + for (i = 0; i < op->nsegs; i++) { + if (op->segs[i].ds_addr & 3) + return (0); + if (i != (op->nsegs - 1) && (op->segs[i].ds_len & 3)) + return (0); + } + return (1); +} + +/* + * Is the operand suitable for direct DMA as the destination + * of an operation. The hardware requires that each ``particle'' + * but the last in an operation result have the same size. We + * fix that size at SAFE_MAX_DSIZE bytes. This routine returns + * 0 if some segment is not a multiple of of this size, 1 if all + * segments are exactly this size, or 2 if segments are at worst + * a multple of this size. + */ +static int +safe_dmamap_uniform(struct safe_softc *sc, const struct safe_operand *op) +{ + int result = 1; + + DPRINTF(("%s()\n", __FUNCTION__)); + + if (op->nsegs > 0) { + int i; + + for (i = 0; i < op->nsegs-1; i++) { + if (op->segs[i].ds_len % sc->sc_max_dsize) + return (0); + if (op->segs[i].ds_len != sc->sc_max_dsize) + result = 2; + } + } + return (result); +} + +static int +safe_kprocess(device_t dev, struct cryptkop *krp, int hint) +{ + struct safe_softc *sc = device_get_softc(dev); + struct safe_pkq *q; + unsigned long flags; + + DPRINTF(("%s()\n", __FUNCTION__)); + + if (sc == NULL) { + krp->krp_status = EINVAL; + goto err; + } + + if (krp->krp_op != CRK_MOD_EXP) { + krp->krp_status = EOPNOTSUPP; + goto err; + } + + q = (struct safe_pkq *) kmalloc(sizeof(*q), GFP_KERNEL); + if (q == NULL) { + krp->krp_status = ENOMEM; + goto err; + } + memset(q, 0, sizeof(*q)); + q->pkq_krp = krp; + INIT_LIST_HEAD(&q->pkq_list); + + spin_lock_irqsave(&sc->sc_pkmtx, flags); + list_add_tail(&q->pkq_list, &sc->sc_pkq); + safe_kfeed(sc); + spin_unlock_irqrestore(&sc->sc_pkmtx, flags); + return (0); + +err: + crypto_kdone(krp); + return (0); +} + +#define SAFE_CRK_PARAM_BASE 0 +#define SAFE_CRK_PARAM_EXP 1 +#define SAFE_CRK_PARAM_MOD 2 + +static int +safe_kstart(struct safe_softc *sc) +{ + struct cryptkop *krp = sc->sc_pkq_cur->pkq_krp; + int exp_bits, mod_bits, base_bits; + u_int32_t op, a_off, b_off, c_off, d_off; + + DPRINTF(("%s()\n", __FUNCTION__)); + + if (krp->krp_iparams < 3 || krp->krp_oparams != 1) { + krp->krp_status = EINVAL; + return (1); + } + + base_bits = safe_ksigbits(sc, &krp->krp_param[SAFE_CRK_PARAM_BASE]); + if (base_bits > 2048) + goto too_big; + if (base_bits <= 0) /* 5. base not zero */ + goto too_small; + + exp_bits = safe_ksigbits(sc, &krp->krp_param[SAFE_CRK_PARAM_EXP]); + if (exp_bits > 2048) + goto too_big; + if (exp_bits <= 0) /* 1. exponent word length > 0 */ + goto too_small; /* 4. exponent not zero */ + + mod_bits = safe_ksigbits(sc, &krp->krp_param[SAFE_CRK_PARAM_MOD]); + if (mod_bits > 2048) + goto too_big; + if (mod_bits <= 32) /* 2. modulus word length > 1 */ + goto too_small; /* 8. MSW of modulus != zero */ + if (mod_bits < exp_bits) /* 3 modulus len >= exponent len */ + goto too_small; + if ((krp->krp_param[SAFE_CRK_PARAM_MOD].crp_p[0] & 1) == 0) + goto bad_domain; /* 6. modulus is odd */ + if (mod_bits > krp->krp_param[krp->krp_iparams].crp_nbits) + goto too_small; /* make sure result will fit */ + + /* 7. modulus > base */ + if (mod_bits < base_bits) + goto too_small; + if (mod_bits == base_bits) { + u_int8_t *basep, *modp; + int i; + + basep = krp->krp_param[SAFE_CRK_PARAM_BASE].crp_p + + ((base_bits + 7) / 8) - 1; + modp = krp->krp_param[SAFE_CRK_PARAM_MOD].crp_p + + ((mod_bits + 7) / 8) - 1; + + for (i = 0; i < (mod_bits + 7) / 8; i++, basep--, modp--) { + if (*modp < *basep) + goto too_small; + if (*modp > *basep) + break; + } + } + + /* And on the 9th step, he rested. */ + + WRITE_REG(sc, SAFE_PK_A_LEN, (exp_bits + 31) / 32); + WRITE_REG(sc, SAFE_PK_B_LEN, (mod_bits + 31) / 32); + if (mod_bits > 1024) { + op = SAFE_PK_FUNC_EXP4; + a_off = 0x000; + b_off = 0x100; + c_off = 0x200; + d_off = 0x300; + } else { + op = SAFE_PK_FUNC_EXP16; + a_off = 0x000; + b_off = 0x080; + c_off = 0x100; + d_off = 0x180; + } + sc->sc_pk_reslen = b_off - a_off; + sc->sc_pk_resoff = d_off; + + /* A is exponent, B is modulus, C is base, D is result */ + safe_kload_reg(sc, a_off, b_off - a_off, + &krp->krp_param[SAFE_CRK_PARAM_EXP]); + WRITE_REG(sc, SAFE_PK_A_ADDR, a_off >> 2); + safe_kload_reg(sc, b_off, b_off - a_off, + &krp->krp_param[SAFE_CRK_PARAM_MOD]); + WRITE_REG(sc, SAFE_PK_B_ADDR, b_off >> 2); + safe_kload_reg(sc, c_off, b_off - a_off, + &krp->krp_param[SAFE_CRK_PARAM_BASE]); + WRITE_REG(sc, SAFE_PK_C_ADDR, c_off >> 2); + WRITE_REG(sc, SAFE_PK_D_ADDR, d_off >> 2); + + WRITE_REG(sc, SAFE_PK_FUNC, op | SAFE_PK_FUNC_RUN); + + return (0); + +too_big: + krp->krp_status = E2BIG; + return (1); +too_small: + krp->krp_status = ERANGE; + return (1); +bad_domain: + krp->krp_status = EDOM; + return (1); +} + +static int +safe_ksigbits(struct safe_softc *sc, struct crparam *cr) +{ + u_int plen = (cr->crp_nbits + 7) / 8; + int i, sig = plen * 8; + u_int8_t c, *p = cr->crp_p; + + DPRINTF(("%s()\n", __FUNCTION__)); + + for (i = plen - 1; i >= 0; i--) { + c = p[i]; + if (c != 0) { + while ((c & 0x80) == 0) { + sig--; + c <<= 1; + } + break; + } + sig -= 8; + } + return (sig); +} + +static void +safe_kfeed(struct safe_softc *sc) +{ + struct safe_pkq *q, *tmp; + + DPRINTF(("%s()\n", __FUNCTION__)); + + if (list_empty(&sc->sc_pkq) && sc->sc_pkq_cur == NULL) + return; + if (sc->sc_pkq_cur != NULL) + return; + list_for_each_entry_safe(q, tmp, &sc->sc_pkq, pkq_list) { + sc->sc_pkq_cur = q; + list_del(&q->pkq_list); + if (safe_kstart(sc) != 0) { + crypto_kdone(q->pkq_krp); + kfree(q); + sc->sc_pkq_cur = NULL; + } else { + /* op started, start polling */ + mod_timer(&sc->sc_pkto, jiffies + 1); + break; + } + } +} + +static void +safe_kpoll(unsigned long arg) +{ + struct safe_softc *sc = NULL; + struct safe_pkq *q; + struct crparam *res; + int i; + u_int32_t buf[64]; + unsigned long flags; + + DPRINTF(("%s()\n", __FUNCTION__)); + + if (arg >= SAFE_MAX_CHIPS) + return; + sc = safe_chip_idx[arg]; + if (!sc) { + DPRINTF(("%s() - bad callback\n", __FUNCTION__)); + return; + } + + spin_lock_irqsave(&sc->sc_pkmtx, flags); + if (sc->sc_pkq_cur == NULL) + goto out; + if (READ_REG(sc, SAFE_PK_FUNC) & SAFE_PK_FUNC_RUN) { + /* still running, check back later */ + mod_timer(&sc->sc_pkto, jiffies + 1); + goto out; + } + + q = sc->sc_pkq_cur; + res = &q->pkq_krp->krp_param[q->pkq_krp->krp_iparams]; + bzero(buf, sizeof(buf)); + bzero(res->crp_p, (res->crp_nbits + 7) / 8); + for (i = 0; i < sc->sc_pk_reslen >> 2; i++) + buf[i] = le32_to_cpu(READ_REG(sc, SAFE_PK_RAM_START + + sc->sc_pk_resoff + (i << 2))); + bcopy(buf, res->crp_p, (res->crp_nbits + 7) / 8); + /* + * reduce the bits that need copying if possible + */ + res->crp_nbits = min(res->crp_nbits,sc->sc_pk_reslen * 8); + res->crp_nbits = safe_ksigbits(sc, res); + + for (i = SAFE_PK_RAM_START; i < SAFE_PK_RAM_END; i += 4) + WRITE_REG(sc, i, 0); + + crypto_kdone(q->pkq_krp); + kfree(q); + sc->sc_pkq_cur = NULL; + + safe_kfeed(sc); +out: + spin_unlock_irqrestore(&sc->sc_pkmtx, flags); +} + +static void +safe_kload_reg(struct safe_softc *sc, u_int32_t off, u_int32_t len, + struct crparam *n) +{ + u_int32_t buf[64], i; + + DPRINTF(("%s()\n", __FUNCTION__)); + + bzero(buf, sizeof(buf)); + bcopy(n->crp_p, buf, (n->crp_nbits + 7) / 8); + + for (i = 0; i < len >> 2; i++) + WRITE_REG(sc, SAFE_PK_RAM_START + off + (i << 2), + cpu_to_le32(buf[i])); +} + +#ifdef SAFE_DEBUG +static void +safe_dump_dmastatus(struct safe_softc *sc, const char *tag) +{ + printf("%s: ENDIAN 0x%x SRC 0x%x DST 0x%x STAT 0x%x\n" + , tag + , READ_REG(sc, SAFE_DMA_ENDIAN) + , READ_REG(sc, SAFE_DMA_SRCADDR) + , READ_REG(sc, SAFE_DMA_DSTADDR) + , READ_REG(sc, SAFE_DMA_STAT) + ); +} + +static void +safe_dump_intrstate(struct safe_softc *sc, const char *tag) +{ + printf("%s: HI_CFG 0x%x HI_MASK 0x%x HI_DESC_CNT 0x%x HU_STAT 0x%x HM_STAT 0x%x\n" + , tag + , READ_REG(sc, SAFE_HI_CFG) + , READ_REG(sc, SAFE_HI_MASK) + , READ_REG(sc, SAFE_HI_DESC_CNT) + , READ_REG(sc, SAFE_HU_STAT) + , READ_REG(sc, SAFE_HM_STAT) + ); +} + +static void +safe_dump_ringstate(struct safe_softc *sc, const char *tag) +{ + u_int32_t estat = READ_REG(sc, SAFE_PE_ERNGSTAT); + + /* NB: assume caller has lock on ring */ + printf("%s: ERNGSTAT %x (next %u) back %lu front %lu\n", + tag, + estat, (estat >> SAFE_PE_ERNGSTAT_NEXT_S), + (unsigned long)(sc->sc_back - sc->sc_ring), + (unsigned long)(sc->sc_front - sc->sc_ring)); +} + +static void +safe_dump_request(struct safe_softc *sc, const char* tag, struct safe_ringentry *re) +{ + int ix, nsegs; + + ix = re - sc->sc_ring; + printf("%s: %p (%u): csr %x src %x dst %x sa %x len %x\n" + , tag + , re, ix + , re->re_desc.d_csr + , re->re_desc.d_src + , re->re_desc.d_dst + , re->re_desc.d_sa + , re->re_desc.d_len + ); + if (re->re_src.nsegs > 1) { + ix = (re->re_desc.d_src - sc->sc_spalloc.dma_paddr) / + sizeof(struct safe_pdesc); + for (nsegs = re->re_src.nsegs; nsegs; nsegs--) { + printf(" spd[%u] %p: %p size %u flags %x" + , ix, &sc->sc_spring[ix] + , (caddr_t)(uintptr_t) sc->sc_spring[ix].pd_addr + , sc->sc_spring[ix].pd_size + , sc->sc_spring[ix].pd_flags + ); + if (sc->sc_spring[ix].pd_size == 0) + printf(" (zero!)"); + printf("\n"); + if (++ix == SAFE_TOTAL_SPART) + ix = 0; + } + } + if (re->re_dst.nsegs > 1) { + ix = (re->re_desc.d_dst - sc->sc_dpalloc.dma_paddr) / + sizeof(struct safe_pdesc); + for (nsegs = re->re_dst.nsegs; nsegs; nsegs--) { + printf(" dpd[%u] %p: %p flags %x\n" + , ix, &sc->sc_dpring[ix] + , (caddr_t)(uintptr_t) sc->sc_dpring[ix].pd_addr + , sc->sc_dpring[ix].pd_flags + ); + if (++ix == SAFE_TOTAL_DPART) + ix = 0; + } + } + printf("sa: cmd0 %08x cmd1 %08x staterec %x\n", + re->re_sa.sa_cmd0, re->re_sa.sa_cmd1, re->re_sa.sa_staterec); + printf("sa: key %x %x %x %x %x %x %x %x\n" + , re->re_sa.sa_key[0] + , re->re_sa.sa_key[1] + , re->re_sa.sa_key[2] + , re->re_sa.sa_key[3] + , re->re_sa.sa_key[4] + , re->re_sa.sa_key[5] + , re->re_sa.sa_key[6] + , re->re_sa.sa_key[7] + ); + printf("sa: indigest %x %x %x %x %x\n" + , re->re_sa.sa_indigest[0] + , re->re_sa.sa_indigest[1] + , re->re_sa.sa_indigest[2] + , re->re_sa.sa_indigest[3] + , re->re_sa.sa_indigest[4] + ); + printf("sa: outdigest %x %x %x %x %x\n" + , re->re_sa.sa_outdigest[0] + , re->re_sa.sa_outdigest[1] + , re->re_sa.sa_outdigest[2] + , re->re_sa.sa_outdigest[3] + , re->re_sa.sa_outdigest[4] + ); + printf("sr: iv %x %x %x %x\n" + , re->re_sastate.sa_saved_iv[0] + , re->re_sastate.sa_saved_iv[1] + , re->re_sastate.sa_saved_iv[2] + , re->re_sastate.sa_saved_iv[3] + ); + printf("sr: hashbc %u indigest %x %x %x %x %x\n" + , re->re_sastate.sa_saved_hashbc + , re->re_sastate.sa_saved_indigest[0] + , re->re_sastate.sa_saved_indigest[1] + , re->re_sastate.sa_saved_indigest[2] + , re->re_sastate.sa_saved_indigest[3] + , re->re_sastate.sa_saved_indigest[4] + ); +} + +static void +safe_dump_ring(struct safe_softc *sc, const char *tag) +{ + unsigned long flags; + + spin_lock_irqsave(&sc->sc_ringmtx, flags); + printf("\nSafeNet Ring State:\n"); + safe_dump_intrstate(sc, tag); + safe_dump_dmastatus(sc, tag); + safe_dump_ringstate(sc, tag); + if (sc->sc_nqchip) { + struct safe_ringentry *re = sc->sc_back; + do { + safe_dump_request(sc, tag, re); + if (++re == sc->sc_ringtop) + re = sc->sc_ring; + } while (re != sc->sc_front); + } + spin_unlock_irqrestore(&sc->sc_ringmtx, flags); +} +#endif /* SAFE_DEBUG */ + + +static int safe_probe(struct pci_dev *dev, const struct pci_device_id *ent) +{ + struct safe_softc *sc = NULL; + u32 mem_start, mem_len, cmd; + int i, rc, devinfo; + dma_addr_t raddr; + static int num_chips = 0; + + DPRINTF(("%s()\n", __FUNCTION__)); + + if (pci_enable_device(dev) < 0) + return(-ENODEV); + + if (!dev->irq) { + printk("safe: found device with no IRQ assigned. check BIOS settings!"); + pci_disable_device(dev); + return(-ENODEV); + } + + if (pci_set_mwi(dev)) { + printk("safe: pci_set_mwi failed!"); + return(-ENODEV); + } + + sc = (struct safe_softc *) kmalloc(sizeof(*sc), GFP_KERNEL); + if (!sc) + return(-ENOMEM); + memset(sc, 0, sizeof(*sc)); + + softc_device_init(sc, "safe", num_chips, safe_methods); + + sc->sc_irq = -1; + sc->sc_cid = -1; + sc->sc_pcidev = dev; + if (num_chips < SAFE_MAX_CHIPS) { + safe_chip_idx[device_get_unit(sc->sc_dev)] = sc; + num_chips++; + } + + INIT_LIST_HEAD(&sc->sc_pkq); + spin_lock_init(&sc->sc_pkmtx); + + pci_set_drvdata(sc->sc_pcidev, sc); + + /* we read its hardware registers as memory */ + mem_start = pci_resource_start(sc->sc_pcidev, 0); + mem_len = pci_resource_len(sc->sc_pcidev, 0); + + sc->sc_base_addr = (ocf_iomem_t) ioremap(mem_start, mem_len); + if (!sc->sc_base_addr) { + device_printf(sc->sc_dev, "failed to ioremap 0x%x-0x%x\n", + mem_start, mem_start + mem_len - 1); + goto out; + } + + /* fix up the bus size */ + if (pci_set_dma_mask(sc->sc_pcidev, DMA_32BIT_MASK)) { + device_printf(sc->sc_dev, "No usable DMA configuration, aborting.\n"); + goto out; + } + if (pci_set_consistent_dma_mask(sc->sc_pcidev, DMA_32BIT_MASK)) { + device_printf(sc->sc_dev, "No usable consistent DMA configuration, aborting.\n"); + goto out; + } + + pci_set_master(sc->sc_pcidev); + + pci_read_config_dword(sc->sc_pcidev, PCI_COMMAND, &cmd); + + if (!(cmd & PCI_COMMAND_MEMORY)) { + device_printf(sc->sc_dev, "failed to enable memory mapping\n"); + goto out; + } + + if (!(cmd & PCI_COMMAND_MASTER)) { + device_printf(sc->sc_dev, "failed to enable bus mastering\n"); + goto out; + } + + rc = request_irq(dev->irq, safe_intr, IRQF_SHARED, "safe", sc); + if (rc) { + device_printf(sc->sc_dev, "failed to hook irq %d\n", sc->sc_irq); + goto out; + } + sc->sc_irq = dev->irq; + + sc->sc_chiprev = READ_REG(sc, SAFE_DEVINFO) & + (SAFE_DEVINFO_REV_MAJ | SAFE_DEVINFO_REV_MIN); + + /* + * Allocate packet engine descriptors. + */ + sc->sc_ringalloc.dma_vaddr = pci_alloc_consistent(sc->sc_pcidev, + SAFE_MAX_NQUEUE * sizeof (struct safe_ringentry), + &sc->sc_ringalloc.dma_paddr); + if (!sc->sc_ringalloc.dma_vaddr) { + device_printf(sc->sc_dev, "cannot allocate PE descriptor ring\n"); + goto out; + } + + /* + * Hookup the static portion of all our data structures. + */ + sc->sc_ring = (struct safe_ringentry *) sc->sc_ringalloc.dma_vaddr; + sc->sc_ringtop = sc->sc_ring + SAFE_MAX_NQUEUE; + sc->sc_front = sc->sc_ring; + sc->sc_back = sc->sc_ring; + raddr = sc->sc_ringalloc.dma_paddr; + bzero(sc->sc_ring, SAFE_MAX_NQUEUE * sizeof(struct safe_ringentry)); + for (i = 0; i < SAFE_MAX_NQUEUE; i++) { + struct safe_ringentry *re = &sc->sc_ring[i]; + + re->re_desc.d_sa = raddr + + offsetof(struct safe_ringentry, re_sa); + re->re_sa.sa_staterec = raddr + + offsetof(struct safe_ringentry, re_sastate); + + raddr += sizeof (struct safe_ringentry); + } + spin_lock_init(&sc->sc_ringmtx); + + /* + * Allocate scatter and gather particle descriptors. + */ + sc->sc_spalloc.dma_vaddr = pci_alloc_consistent(sc->sc_pcidev, + SAFE_TOTAL_SPART * sizeof (struct safe_pdesc), + &sc->sc_spalloc.dma_paddr); + if (!sc->sc_spalloc.dma_vaddr) { + device_printf(sc->sc_dev, "cannot allocate source particle descriptor ring\n"); + goto out; + } + sc->sc_spring = (struct safe_pdesc *) sc->sc_spalloc.dma_vaddr; + sc->sc_springtop = sc->sc_spring + SAFE_TOTAL_SPART; + sc->sc_spfree = sc->sc_spring; + bzero(sc->sc_spring, SAFE_TOTAL_SPART * sizeof(struct safe_pdesc)); + + sc->sc_dpalloc.dma_vaddr = pci_alloc_consistent(sc->sc_pcidev, + SAFE_TOTAL_DPART * sizeof (struct safe_pdesc), + &sc->sc_dpalloc.dma_paddr); + if (!sc->sc_dpalloc.dma_vaddr) { + device_printf(sc->sc_dev, "cannot allocate destination particle descriptor ring\n"); + goto out; + } + sc->sc_dpring = (struct safe_pdesc *) sc->sc_dpalloc.dma_vaddr; + sc->sc_dpringtop = sc->sc_dpring + SAFE_TOTAL_DPART; + sc->sc_dpfree = sc->sc_dpring; + bzero(sc->sc_dpring, SAFE_TOTAL_DPART * sizeof(struct safe_pdesc)); + + sc->sc_cid = crypto_get_driverid(softc_get_device(sc), CRYPTOCAP_F_HARDWARE); + if (sc->sc_cid < 0) { + device_printf(sc->sc_dev, "could not get crypto driver id\n"); + goto out; + } + + printf("%s:", device_get_nameunit(sc->sc_dev)); + + devinfo = READ_REG(sc, SAFE_DEVINFO); + if (devinfo & SAFE_DEVINFO_RNG) { + sc->sc_flags |= SAFE_FLAGS_RNG; + printf(" rng"); + } + if (devinfo & SAFE_DEVINFO_PKEY) { + printf(" key"); + sc->sc_flags |= SAFE_FLAGS_KEY; + crypto_kregister(sc->sc_cid, CRK_MOD_EXP, 0); +#if 0 + crypto_kregister(sc->sc_cid, CRK_MOD_EXP_CRT, 0); +#endif + init_timer(&sc->sc_pkto); + sc->sc_pkto.function = safe_kpoll; + sc->sc_pkto.data = (unsigned long) device_get_unit(sc->sc_dev); + } + if (devinfo & SAFE_DEVINFO_DES) { + printf(" des/3des"); + crypto_register(sc->sc_cid, CRYPTO_3DES_CBC, 0, 0); + crypto_register(sc->sc_cid, CRYPTO_DES_CBC, 0, 0); + } + if (devinfo & SAFE_DEVINFO_AES) { + printf(" aes"); + crypto_register(sc->sc_cid, CRYPTO_AES_CBC, 0, 0); + } + if (devinfo & SAFE_DEVINFO_MD5) { + printf(" md5"); + crypto_register(sc->sc_cid, CRYPTO_MD5_HMAC, 0, 0); + } + if (devinfo & SAFE_DEVINFO_SHA1) { + printf(" sha1"); + crypto_register(sc->sc_cid, CRYPTO_SHA1_HMAC, 0, 0); + } + printf(" null"); + crypto_register(sc->sc_cid, CRYPTO_NULL_CBC, 0, 0); + crypto_register(sc->sc_cid, CRYPTO_NULL_HMAC, 0, 0); + /* XXX other supported algorithms */ + printf("\n"); + + safe_reset_board(sc); /* reset h/w */ + safe_init_board(sc); /* init h/w */ + +#if defined(CONFIG_OCF_RANDOMHARVEST) && !defined(SAFE_NO_RNG) + if (sc->sc_flags & SAFE_FLAGS_RNG) { + safe_rng_init(sc); + crypto_rregister(sc->sc_cid, safe_read_random, sc); + } +#endif /* SAFE_NO_RNG */ + + return (0); + +out: + if (sc->sc_cid >= 0) + crypto_unregister_all(sc->sc_cid); + if (sc->sc_irq != -1) + free_irq(sc->sc_irq, sc); + if (sc->sc_ringalloc.dma_vaddr) + pci_free_consistent(sc->sc_pcidev, + SAFE_MAX_NQUEUE * sizeof (struct safe_ringentry), + sc->sc_ringalloc.dma_vaddr, sc->sc_ringalloc.dma_paddr); + if (sc->sc_spalloc.dma_vaddr) + pci_free_consistent(sc->sc_pcidev, + SAFE_TOTAL_DPART * sizeof (struct safe_pdesc), + sc->sc_spalloc.dma_vaddr, sc->sc_spalloc.dma_paddr); + if (sc->sc_dpalloc.dma_vaddr) + pci_free_consistent(sc->sc_pcidev, + SAFE_TOTAL_DPART * sizeof (struct safe_pdesc), + sc->sc_dpalloc.dma_vaddr, sc->sc_dpalloc.dma_paddr); + kfree(sc); + return(-ENODEV); +} + +static void safe_remove(struct pci_dev *dev) +{ + struct safe_softc *sc = pci_get_drvdata(dev); + + DPRINTF(("%s()\n", __FUNCTION__)); + + /* XXX wait/abort active ops */ + + WRITE_REG(sc, SAFE_HI_MASK, 0); /* disable interrupts */ + + del_timer_sync(&sc->sc_pkto); + + crypto_unregister_all(sc->sc_cid); + + safe_cleanchip(sc); + + if (sc->sc_irq != -1) + free_irq(sc->sc_irq, sc); + if (sc->sc_ringalloc.dma_vaddr) + pci_free_consistent(sc->sc_pcidev, + SAFE_MAX_NQUEUE * sizeof (struct safe_ringentry), + sc->sc_ringalloc.dma_vaddr, sc->sc_ringalloc.dma_paddr); + if (sc->sc_spalloc.dma_vaddr) + pci_free_consistent(sc->sc_pcidev, + SAFE_TOTAL_DPART * sizeof (struct safe_pdesc), + sc->sc_spalloc.dma_vaddr, sc->sc_spalloc.dma_paddr); + if (sc->sc_dpalloc.dma_vaddr) + pci_free_consistent(sc->sc_pcidev, + SAFE_TOTAL_DPART * sizeof (struct safe_pdesc), + sc->sc_dpalloc.dma_vaddr, sc->sc_dpalloc.dma_paddr); + sc->sc_irq = -1; + sc->sc_ringalloc.dma_vaddr = NULL; + sc->sc_spalloc.dma_vaddr = NULL; + sc->sc_dpalloc.dma_vaddr = NULL; +} + +static struct pci_device_id safe_pci_tbl[] = { + { PCI_VENDOR_SAFENET, PCI_PRODUCT_SAFEXCEL, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, }, + { }, +}; +MODULE_DEVICE_TABLE(pci, safe_pci_tbl); + +static struct pci_driver safe_driver = { + .name = "safe", + .id_table = safe_pci_tbl, + .probe = safe_probe, + .remove = safe_remove, + /* add PM stuff here one day */ +}; + +static int __init safe_init (void) +{ + struct safe_softc *sc = NULL; + int rc; + + DPRINTF(("%s(%p)\n", __FUNCTION__, safe_init)); + + rc = pci_register_driver(&safe_driver); + pci_register_driver_compat(&safe_driver, rc); + + return rc; +} + +static void __exit safe_exit (void) +{ + pci_unregister_driver(&safe_driver); +} + +module_init(safe_init); +module_exit(safe_exit); + +MODULE_LICENSE("BSD"); +MODULE_AUTHOR("David McCullough "); +MODULE_DESCRIPTION("OCF driver for safenet PCI crypto devices"); diff --git a/target/linux/generic-2.4/files/crypto/ocf/safe/safereg.h b/target/linux/generic-2.4/files/crypto/ocf/safe/safereg.h new file mode 100644 index 0000000000..dbaf98fe78 --- /dev/null +++ b/target/linux/generic-2.4/files/crypto/ocf/safe/safereg.h @@ -0,0 +1,421 @@ +/*- + * Copyright (c) 2003 Sam Leffler, Errno Consulting + * Copyright (c) 2003 Global Technology Associates, Inc. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * + * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + * + * $FreeBSD: src/sys/dev/safe/safereg.h,v 1.1 2003/07/21 21:46:07 sam Exp $ + */ +#ifndef _SAFE_SAFEREG_H_ +#define _SAFE_SAFEREG_H_ + +/* + * Register definitions for SafeNet SafeXcel-1141 crypto device. + * Definitions from revision 1.3 (Nov 6 2002) of the User's Manual. + */ + +#define BS_BAR 0x10 /* DMA base address register */ +#define BS_TRDY_TIMEOUT 0x40 /* TRDY timeout */ +#define BS_RETRY_TIMEOUT 0x41 /* DMA retry timeout */ + +#define PCI_VENDOR_SAFENET 0x16ae /* SafeNet, Inc. */ + +/* SafeNet */ +#define PCI_PRODUCT_SAFEXCEL 0x1141 /* 1141 */ + +#define SAFE_PE_CSR 0x0000 /* Packet Enginge Ctrl/Status */ +#define SAFE_PE_SRC 0x0004 /* Packet Engine Source */ +#define SAFE_PE_DST 0x0008 /* Packet Engine Destination */ +#define SAFE_PE_SA 0x000c /* Packet Engine SA */ +#define SAFE_PE_LEN 0x0010 /* Packet Engine Length */ +#define SAFE_PE_DMACFG 0x0040 /* Packet Engine DMA Configuration */ +#define SAFE_PE_DMASTAT 0x0044 /* Packet Engine DMA Status */ +#define SAFE_PE_PDRBASE 0x0048 /* Packet Engine Descriptor Ring Base */ +#define SAFE_PE_RDRBASE 0x004c /* Packet Engine Result Ring Base */ +#define SAFE_PE_RINGCFG 0x0050 /* Packet Engine Ring Configuration */ +#define SAFE_PE_RINGPOLL 0x0054 /* Packet Engine Ring Poll */ +#define SAFE_PE_IRNGSTAT 0x0058 /* Packet Engine Internal Ring Status */ +#define SAFE_PE_ERNGSTAT 0x005c /* Packet Engine External Ring Status */ +#define SAFE_PE_IOTHRESH 0x0060 /* Packet Engine I/O Threshold */ +#define SAFE_PE_GRNGBASE 0x0064 /* Packet Engine Gather Ring Base */ +#define SAFE_PE_SRNGBASE 0x0068 /* Packet Engine Scatter Ring Base */ +#define SAFE_PE_PARTSIZE 0x006c /* Packet Engine Particlar Ring Size */ +#define SAFE_PE_PARTCFG 0x0070 /* Packet Engine Particle Ring Config */ +#define SAFE_CRYPTO_CTRL 0x0080 /* Crypto Control */ +#define SAFE_DEVID 0x0084 /* Device ID */ +#define SAFE_DEVINFO 0x0088 /* Device Info */ +#define SAFE_HU_STAT 0x00a0 /* Host Unmasked Status */ +#define SAFE_HM_STAT 0x00a4 /* Host Masked Status (read-only) */ +#define SAFE_HI_CLR 0x00a4 /* Host Clear Interrupt (write-only) */ +#define SAFE_HI_MASK 0x00a8 /* Host Mask Control */ +#define SAFE_HI_CFG 0x00ac /* Interrupt Configuration */ +#define SAFE_HI_RD_DESCR 0x00b4 /* Force Descriptor Read */ +#define SAFE_HI_DESC_CNT 0x00b8 /* Host Descriptor Done Count */ +#define SAFE_DMA_ENDIAN 0x00c0 /* Master Endian Status */ +#define SAFE_DMA_SRCADDR 0x00c4 /* DMA Source Address Status */ +#define SAFE_DMA_DSTADDR 0x00c8 /* DMA Destination Address Status */ +#define SAFE_DMA_STAT 0x00cc /* DMA Current Status */ +#define SAFE_DMA_CFG 0x00d4 /* DMA Configuration/Status */ +#define SAFE_ENDIAN 0x00e0 /* Endian Configuration */ +#define SAFE_PK_A_ADDR 0x0800 /* Public Key A Address */ +#define SAFE_PK_B_ADDR 0x0804 /* Public Key B Address */ +#define SAFE_PK_C_ADDR 0x0808 /* Public Key C Address */ +#define SAFE_PK_D_ADDR 0x080c /* Public Key D Address */ +#define SAFE_PK_A_LEN 0x0810 /* Public Key A Length */ +#define SAFE_PK_B_LEN 0x0814 /* Public Key B Length */ +#define SAFE_PK_SHIFT 0x0818 /* Public Key Shift */ +#define SAFE_PK_FUNC 0x081c /* Public Key Function */ +#define SAFE_PK_RAM_START 0x1000 /* Public Key RAM start address */ +#define SAFE_PK_RAM_END 0x1fff /* Public Key RAM end address */ + +#define SAFE_RNG_OUT 0x0100 /* RNG Output */ +#define SAFE_RNG_STAT 0x0104 /* RNG Status */ +#define SAFE_RNG_CTRL 0x0108 /* RNG Control */ +#define SAFE_RNG_A 0x010c /* RNG A */ +#define SAFE_RNG_B 0x0110 /* RNG B */ +#define SAFE_RNG_X_LO 0x0114 /* RNG X [31:0] */ +#define SAFE_RNG_X_MID 0x0118 /* RNG X [63:32] */ +#define SAFE_RNG_X_HI 0x011c /* RNG X [80:64] */ +#define SAFE_RNG_X_CNTR 0x0120 /* RNG Counter */ +#define SAFE_RNG_ALM_CNT 0x0124 /* RNG Alarm Count */ +#define SAFE_RNG_CNFG 0x0128 /* RNG Configuration */ +#define SAFE_RNG_LFSR1_LO 0x012c /* RNG LFSR1 [31:0] */ +#define SAFE_RNG_LFSR1_HI 0x0130 /* RNG LFSR1 [47:32] */ +#define SAFE_RNG_LFSR2_LO 0x0134 /* RNG LFSR1 [31:0] */ +#define SAFE_RNG_LFSR2_HI 0x0138 /* RNG LFSR1 [47:32] */ + +#define SAFE_PE_CSR_READY 0x00000001 /* ready for processing */ +#define SAFE_PE_CSR_DONE 0x00000002 /* h/w completed processing */ +#define SAFE_PE_CSR_LOADSA 0x00000004 /* load SA digests */ +#define SAFE_PE_CSR_HASHFINAL 0x00000010 /* do hash pad & write result */ +#define SAFE_PE_CSR_SABUSID 0x000000c0 /* bus id for SA */ +#define SAFE_PE_CSR_SAPCI 0x00000040 /* PCI bus id for SA */ +#define SAFE_PE_CSR_NXTHDR 0x0000ff00 /* next hdr value for IPsec */ +#define SAFE_PE_CSR_FPAD 0x0000ff00 /* fixed pad for basic ops */ +#define SAFE_PE_CSR_STATUS 0x00ff0000 /* operation result status */ +#define SAFE_PE_CSR_AUTH_FAIL 0x00010000 /* ICV mismatch (inbound) */ +#define SAFE_PE_CSR_PAD_FAIL 0x00020000 /* pad verify fail (inbound) */ +#define SAFE_PE_CSR_SEQ_FAIL 0x00040000 /* sequence number (inbound) */ +#define SAFE_PE_CSR_XERROR 0x00080000 /* extended error follows */ +#define SAFE_PE_CSR_XECODE 0x00f00000 /* extended error code */ +#define SAFE_PE_CSR_XECODE_S 20 +#define SAFE_PE_CSR_XECODE_BADCMD 0 /* invalid command */ +#define SAFE_PE_CSR_XECODE_BADALG 1 /* invalid algorithm */ +#define SAFE_PE_CSR_XECODE_ALGDIS 2 /* algorithm disabled */ +#define SAFE_PE_CSR_XECODE_ZEROLEN 3 /* zero packet length */ +#define SAFE_PE_CSR_XECODE_DMAERR 4 /* bus DMA error */ +#define SAFE_PE_CSR_XECODE_PIPEABORT 5 /* secondary bus DMA error */ +#define SAFE_PE_CSR_XECODE_BADSPI 6 /* IPsec SPI mismatch */ +#define SAFE_PE_CSR_XECODE_TIMEOUT 10 /* failsafe timeout */ +#define SAFE_PE_CSR_PAD 0xff000000 /* ESP padding control/status */ +#define SAFE_PE_CSR_PAD_MIN 0x00000000 /* minimum IPsec padding */ +#define SAFE_PE_CSR_PAD_16 0x08000000 /* pad to 16-byte boundary */ +#define SAFE_PE_CSR_PAD_32 0x10000000 /* pad to 32-byte boundary */ +#define SAFE_PE_CSR_PAD_64 0x20000000 /* pad to 64-byte boundary */ +#define SAFE_PE_CSR_PAD_128 0x40000000 /* pad to 128-byte boundary */ +#define SAFE_PE_CSR_PAD_256 0x80000000 /* pad to 256-byte boundary */ + +/* + * Check the CSR to see if the PE has returned ownership to + * the host. Note that before processing a descriptor this + * must be done followed by a check of the SAFE_PE_LEN register + * status bits to avoid premature processing of a descriptor + * on its way back to the host. + */ +#define SAFE_PE_CSR_IS_DONE(_csr) \ + (((_csr) & (SAFE_PE_CSR_READY | SAFE_PE_CSR_DONE)) == SAFE_PE_CSR_DONE) + +#define SAFE_PE_LEN_LENGTH 0x000fffff /* total length (bytes) */ +#define SAFE_PE_LEN_READY 0x00400000 /* ready for processing */ +#define SAFE_PE_LEN_DONE 0x00800000 /* h/w completed processing */ +#define SAFE_PE_LEN_BYPASS 0xff000000 /* bypass offset (bytes) */ +#define SAFE_PE_LEN_BYPASS_S 24 + +#define SAFE_PE_LEN_IS_DONE(_len) \ + (((_len) & (SAFE_PE_LEN_READY | SAFE_PE_LEN_DONE)) == SAFE_PE_LEN_DONE) + +/* NB: these apply to HU_STAT, HM_STAT, HI_CLR, and HI_MASK */ +#define SAFE_INT_PE_CDONE 0x00000002 /* PE context done */ +#define SAFE_INT_PE_DDONE 0x00000008 /* PE descriptor done */ +#define SAFE_INT_PE_ERROR 0x00000010 /* PE error */ +#define SAFE_INT_PE_ODONE 0x00000020 /* PE operation done */ + +#define SAFE_HI_CFG_PULSE 0x00000001 /* use pulse interrupt */ +#define SAFE_HI_CFG_LEVEL 0x00000000 /* use level interrupt */ +#define SAFE_HI_CFG_AUTOCLR 0x00000002 /* auto-clear pulse interrupt */ + +#define SAFE_ENDIAN_PASS 0x000000e4 /* straight pass-thru */ +#define SAFE_ENDIAN_SWAB 0x0000001b /* swap bytes in 32-bit word */ + +#define SAFE_PE_DMACFG_PERESET 0x00000001 /* reset packet engine */ +#define SAFE_PE_DMACFG_PDRRESET 0x00000002 /* reset PDR counters/ptrs */ +#define SAFE_PE_DMACFG_SGRESET 0x00000004 /* reset scatter/gather cache */ +#define SAFE_PE_DMACFG_FSENA 0x00000008 /* enable failsafe reset */ +#define SAFE_PE_DMACFG_PEMODE 0x00000100 /* packet engine mode */ +#define SAFE_PE_DMACFG_SAPREC 0x00000200 /* SA precedes packet */ +#define SAFE_PE_DMACFG_PKFOLL 0x00000400 /* packet follows descriptor */ +#define SAFE_PE_DMACFG_GPRBID 0x00003000 /* gather particle ring busid */ +#define SAFE_PE_DMACFG_GPRPCI 0x00001000 /* PCI gather particle ring */ +#define SAFE_PE_DMACFG_SPRBID 0x0000c000 /* scatter part. ring busid */ +#define SAFE_PE_DMACFG_SPRPCI 0x00004000 /* PCI scatter part. ring */ +#define SAFE_PE_DMACFG_ESDESC 0x00010000 /* endian swap descriptors */ +#define SAFE_PE_DMACFG_ESSA 0x00020000 /* endian swap SA data */ +#define SAFE_PE_DMACFG_ESPACKET 0x00040000 /* endian swap packet data */ +#define SAFE_PE_DMACFG_ESPDESC 0x00080000 /* endian swap particle desc. */ +#define SAFE_PE_DMACFG_NOPDRUP 0x00100000 /* supp. PDR ownership update */ +#define SAFE_PD_EDMACFG_PCIMODE 0x01000000 /* PCI target mode */ + +#define SAFE_PE_DMASTAT_PEIDONE 0x00000001 /* PE core input done */ +#define SAFE_PE_DMASTAT_PEODONE 0x00000002 /* PE core output done */ +#define SAFE_PE_DMASTAT_ENCDONE 0x00000004 /* encryption done */ +#define SAFE_PE_DMASTAT_IHDONE 0x00000008 /* inner hash done */ +#define SAFE_PE_DMASTAT_OHDONE 0x00000010 /* outer hash (HMAC) done */ +#define SAFE_PE_DMASTAT_PADFLT 0x00000020 /* crypto pad fault */ +#define SAFE_PE_DMASTAT_ICVFLT 0x00000040 /* ICV fault */ +#define SAFE_PE_DMASTAT_SPIMIS 0x00000080 /* SPI mismatch */ +#define SAFE_PE_DMASTAT_CRYPTO 0x00000100 /* crypto engine timeout */ +#define SAFE_PE_DMASTAT_CQACT 0x00000200 /* command queue active */ +#define SAFE_PE_DMASTAT_IRACT 0x00000400 /* input request active */ +#define SAFE_PE_DMASTAT_ORACT 0x00000800 /* output request active */ +#define SAFE_PE_DMASTAT_PEISIZE 0x003ff000 /* PE input size:32-bit words */ +#define SAFE_PE_DMASTAT_PEOSIZE 0xffc00000 /* PE out. size:32-bit words */ + +#define SAFE_PE_RINGCFG_SIZE 0x000003ff /* ring size (descriptors) */ +#define SAFE_PE_RINGCFG_OFFSET 0xffff0000 /* offset btw desc's (dwords) */ +#define SAFE_PE_RINGCFG_OFFSET_S 16 + +#define SAFE_PE_RINGPOLL_POLL 0x00000fff /* polling frequency/divisor */ +#define SAFE_PE_RINGPOLL_RETRY 0x03ff0000 /* polling frequency/divisor */ +#define SAFE_PE_RINGPOLL_CONT 0x80000000 /* continuously poll */ + +#define SAFE_PE_IRNGSTAT_CQAVAIL 0x00000001 /* command queue available */ + +#define SAFE_PE_ERNGSTAT_NEXT 0x03ff0000 /* index of next packet desc. */ +#define SAFE_PE_ERNGSTAT_NEXT_S 16 + +#define SAFE_PE_IOTHRESH_INPUT 0x000003ff /* input threshold (dwords) */ +#define SAFE_PE_IOTHRESH_OUTPUT 0x03ff0000 /* output threshold (dwords) */ + +#define SAFE_PE_PARTCFG_SIZE 0x0000ffff /* scatter particle size */ +#define SAFE_PE_PARTCFG_GBURST 0x00030000 /* gather particle burst */ +#define SAFE_PE_PARTCFG_GBURST_2 0x00000000 +#define SAFE_PE_PARTCFG_GBURST_4 0x00010000 +#define SAFE_PE_PARTCFG_GBURST_8 0x00020000 +#define SAFE_PE_PARTCFG_GBURST_16 0x00030000 +#define SAFE_PE_PARTCFG_SBURST 0x000c0000 /* scatter particle burst */ +#define SAFE_PE_PARTCFG_SBURST_2 0x00000000 +#define SAFE_PE_PARTCFG_SBURST_4 0x00040000 +#define SAFE_PE_PARTCFG_SBURST_8 0x00080000 +#define SAFE_PE_PARTCFG_SBURST_16 0x000c0000 + +#define SAFE_PE_PARTSIZE_SCAT 0xffff0000 /* scatter particle ring size */ +#define SAFE_PE_PARTSIZE_GATH 0x0000ffff /* gather particle ring size */ + +#define SAFE_CRYPTO_CTRL_3DES 0x00000001 /* enable 3DES support */ +#define SAFE_CRYPTO_CTRL_PKEY 0x00010000 /* enable public key support */ +#define SAFE_CRYPTO_CTRL_RNG 0x00020000 /* enable RNG support */ + +#define SAFE_DEVINFO_REV_MIN 0x0000000f /* minor rev for chip */ +#define SAFE_DEVINFO_REV_MAJ 0x000000f0 /* major rev for chip */ +#define SAFE_DEVINFO_REV_MAJ_S 4 +#define SAFE_DEVINFO_DES 0x00000100 /* DES/3DES support present */ +#define SAFE_DEVINFO_ARC4 0x00000200 /* ARC4 support present */ +#define SAFE_DEVINFO_AES 0x00000400 /* AES support present */ +#define SAFE_DEVINFO_MD5 0x00001000 /* MD5 support present */ +#define SAFE_DEVINFO_SHA1 0x00002000 /* SHA-1 support present */ +#define SAFE_DEVINFO_RIPEMD 0x00004000 /* RIPEMD support present */ +#define SAFE_DEVINFO_DEFLATE 0x00010000 /* Deflate support present */ +#define SAFE_DEVINFO_SARAM 0x00100000 /* on-chip SA RAM present */ +#define SAFE_DEVINFO_EMIBUS 0x00200000 /* EMI bus present */ +#define SAFE_DEVINFO_PKEY 0x00400000 /* public key support present */ +#define SAFE_DEVINFO_RNG 0x00800000 /* RNG present */ + +#define SAFE_REV(_maj, _min) (((_maj) << SAFE_DEVINFO_REV_MAJ_S) | (_min)) +#define SAFE_REV_MAJ(_chiprev) \ + (((_chiprev) & SAFE_DEVINFO_REV_MAJ) >> SAFE_DEVINFO_REV_MAJ_S) +#define SAFE_REV_MIN(_chiprev) ((_chiprev) & SAFE_DEVINFO_REV_MIN) + +#define SAFE_PK_FUNC_MULT 0x00000001 /* Multiply function */ +#define SAFE_PK_FUNC_SQUARE 0x00000004 /* Square function */ +#define SAFE_PK_FUNC_ADD 0x00000010 /* Add function */ +#define SAFE_PK_FUNC_SUB 0x00000020 /* Subtract function */ +#define SAFE_PK_FUNC_LSHIFT 0x00000040 /* Left-shift function */ +#define SAFE_PK_FUNC_RSHIFT 0x00000080 /* Right-shift function */ +#define SAFE_PK_FUNC_DIV 0x00000100 /* Divide function */ +#define SAFE_PK_FUNC_CMP 0x00000400 /* Compare function */ +#define SAFE_PK_FUNC_COPY 0x00000800 /* Copy function */ +#define SAFE_PK_FUNC_EXP16 0x00002000 /* Exponentiate (4-bit ACT) */ +#define SAFE_PK_FUNC_EXP4 0x00004000 /* Exponentiate (2-bit ACT) */ +#define SAFE_PK_FUNC_RUN 0x00008000 /* start/status */ + +#define SAFE_RNG_STAT_BUSY 0x00000001 /* busy, data not valid */ + +#define SAFE_RNG_CTRL_PRE_LFSR 0x00000001 /* enable output pre-LFSR */ +#define SAFE_RNG_CTRL_TST_MODE 0x00000002 /* enable test mode */ +#define SAFE_RNG_CTRL_TST_RUN 0x00000004 /* start test state machine */ +#define SAFE_RNG_CTRL_ENA_RING1 0x00000008 /* test entropy oscillator #1 */ +#define SAFE_RNG_CTRL_ENA_RING2 0x00000010 /* test entropy oscillator #2 */ +#define SAFE_RNG_CTRL_DIS_ALARM 0x00000020 /* disable RNG alarm reports */ +#define SAFE_RNG_CTRL_TST_CLOCK 0x00000040 /* enable test clock */ +#define SAFE_RNG_CTRL_SHORTEN 0x00000080 /* shorten state timers */ +#define SAFE_RNG_CTRL_TST_ALARM 0x00000100 /* simulate alarm state */ +#define SAFE_RNG_CTRL_RST_LFSR 0x00000200 /* reset LFSR */ + +/* + * Packet engine descriptor. Note that d_csr is a copy of the + * SAFE_PE_CSR register and all definitions apply, and d_len + * is a copy of the SAFE_PE_LEN register and all definitions apply. + * d_src and d_len may point directly to contiguous data or to a + * list of ``particle descriptors'' when using scatter/gather i/o. + */ +struct safe_desc { + u_int32_t d_csr; /* per-packet control/status */ + u_int32_t d_src; /* source address */ + u_int32_t d_dst; /* destination address */ + u_int32_t d_sa; /* SA address */ + u_int32_t d_len; /* length, bypass, status */ +}; + +/* + * Scatter/Gather particle descriptor. + * + * NB: scatter descriptors do not specify a size; this is fixed + * by the setting of the SAFE_PE_PARTCFG register. + */ +struct safe_pdesc { + u_int32_t pd_addr; /* particle address */ +#ifdef __BIG_ENDIAN + u_int16_t pd_flags; /* control word */ + u_int16_t pd_size; /* particle size (bytes) */ +#else + u_int16_t pd_flags; /* control word */ + u_int16_t pd_size; /* particle size (bytes) */ +#endif +}; + +#define SAFE_PD_READY 0x0001 /* ready for processing */ +#define SAFE_PD_DONE 0x0002 /* h/w completed processing */ + +/* + * Security Association (SA) Record (Rev 1). One of these is + * required for each operation processed by the packet engine. + */ +struct safe_sarec { + u_int32_t sa_cmd0; + u_int32_t sa_cmd1; + u_int32_t sa_resv0; + u_int32_t sa_resv1; + u_int32_t sa_key[8]; /* DES/3DES/AES key */ + u_int32_t sa_indigest[5]; /* inner digest */ + u_int32_t sa_outdigest[5]; /* outer digest */ + u_int32_t sa_spi; /* SPI */ + u_int32_t sa_seqnum; /* sequence number */ + u_int32_t sa_seqmask[2]; /* sequence number mask */ + u_int32_t sa_resv2; + u_int32_t sa_staterec; /* address of state record */ + u_int32_t sa_resv3[2]; + u_int32_t sa_samgmt0; /* SA management field 0 */ + u_int32_t sa_samgmt1; /* SA management field 0 */ +}; + +#define SAFE_SA_CMD0_OP 0x00000007 /* operation code */ +#define SAFE_SA_CMD0_OP_CRYPT 0x00000000 /* encrypt/decrypt (basic) */ +#define SAFE_SA_CMD0_OP_BOTH 0x00000001 /* encrypt-hash/hash-decrypto */ +#define SAFE_SA_CMD0_OP_HASH 0x00000003 /* hash (outbound-only) */ +#define SAFE_SA_CMD0_OP_ESP 0x00000000 /* ESP in/out (proto) */ +#define SAFE_SA_CMD0_OP_AH 0x00000001 /* AH in/out (proto) */ +#define SAFE_SA_CMD0_INBOUND 0x00000008 /* inbound operation */ +#define SAFE_SA_CMD0_OUTBOUND 0x00000000 /* outbound operation */ +#define SAFE_SA_CMD0_GROUP 0x00000030 /* operation group */ +#define SAFE_SA_CMD0_BASIC 0x00000000 /* basic operation */ +#define SAFE_SA_CMD0_PROTO 0x00000010 /* protocol/packet operation */ +#define SAFE_SA_CMD0_BUNDLE 0x00000020 /* bundled operation (resvd) */ +#define SAFE_SA_CMD0_PAD 0x000000c0 /* crypto pad method */ +#define SAFE_SA_CMD0_PAD_IPSEC 0x00000000 /* IPsec padding */ +#define SAFE_SA_CMD0_PAD_PKCS7 0x00000040 /* PKCS#7 padding */ +#define SAFE_SA_CMD0_PAD_CONS 0x00000080 /* constant padding */ +#define SAFE_SA_CMD0_PAD_ZERO 0x000000c0 /* zero padding */ +#define SAFE_SA_CMD0_CRYPT_ALG 0x00000f00 /* symmetric crypto algorithm */ +#define SAFE_SA_CMD0_DES 0x00000000 /* DES crypto algorithm */ +#define SAFE_SA_CMD0_3DES 0x00000100 /* 3DES crypto algorithm */ +#define SAFE_SA_CMD0_AES 0x00000300 /* AES crypto algorithm */ +#define SAFE_SA_CMD0_CRYPT_NULL 0x00000f00 /* null crypto algorithm */ +#define SAFE_SA_CMD0_HASH_ALG 0x0000f000 /* hash algorithm */ +#define SAFE_SA_CMD0_MD5 0x00000000 /* MD5 hash algorithm */ +#define SAFE_SA_CMD0_SHA1 0x00001000 /* SHA-1 hash algorithm */ +#define SAFE_SA_CMD0_HASH_NULL 0x0000f000 /* null hash algorithm */ +#define SAFE_SA_CMD0_HDR_PROC 0x00080000 /* header processing */ +#define SAFE_SA_CMD0_IBUSID 0x00300000 /* input bus id */ +#define SAFE_SA_CMD0_IPCI 0x00100000 /* PCI input bus id */ +#define SAFE_SA_CMD0_OBUSID 0x00c00000 /* output bus id */ +#define SAFE_SA_CMD0_OPCI 0x00400000 /* PCI output bus id */ +#define SAFE_SA_CMD0_IVLD 0x03000000 /* IV loading */ +#define SAFE_SA_CMD0_IVLD_NONE 0x00000000 /* IV no load (reuse) */ +#define SAFE_SA_CMD0_IVLD_IBUF 0x01000000 /* IV load from input buffer */ +#define SAFE_SA_CMD0_IVLD_STATE 0x02000000 /* IV load from state */ +#define SAFE_SA_CMD0_HSLD 0x0c000000 /* hash state loading */ +#define SAFE_SA_CMD0_HSLD_SA 0x00000000 /* hash state load from SA */ +#define SAFE_SA_CMD0_HSLD_STATE 0x08000000 /* hash state load from state */ +#define SAFE_SA_CMD0_HSLD_NONE 0x0c000000 /* hash state no load */ +#define SAFE_SA_CMD0_SAVEIV 0x10000000 /* save IV */ +#define SAFE_SA_CMD0_SAVEHASH 0x20000000 /* save hash state */ +#define SAFE_SA_CMD0_IGATHER 0x40000000 /* input gather */ +#define SAFE_SA_CMD0_OSCATTER 0x80000000 /* output scatter */ + +#define SAFE_SA_CMD1_HDRCOPY 0x00000002 /* copy header to output */ +#define SAFE_SA_CMD1_PAYCOPY 0x00000004 /* copy payload to output */ +#define SAFE_SA_CMD1_PADCOPY 0x00000008 /* copy pad to output */ +#define SAFE_SA_CMD1_IPV4 0x00000000 /* IPv4 protocol */ +#define SAFE_SA_CMD1_IPV6 0x00000010 /* IPv6 protocol */ +#define SAFE_SA_CMD1_MUTABLE 0x00000020 /* mutable bit processing */ +#define SAFE_SA_CMD1_SRBUSID 0x000000c0 /* state record bus id */ +#define SAFE_SA_CMD1_SRPCI 0x00000040 /* state record from PCI */ +#define SAFE_SA_CMD1_CRMODE 0x00000300 /* crypto mode */ +#define SAFE_SA_CMD1_ECB 0x00000000 /* ECB crypto mode */ +#define SAFE_SA_CMD1_CBC 0x00000100 /* CBC crypto mode */ +#define SAFE_SA_CMD1_OFB 0x00000200 /* OFB crypto mode */ +#define SAFE_SA_CMD1_CFB 0x00000300 /* CFB crypto mode */ +#define SAFE_SA_CMD1_CRFEEDBACK 0x00000c00 /* crypto feedback mode */ +#define SAFE_SA_CMD1_64BIT 0x00000000 /* 64-bit crypto feedback */ +#define SAFE_SA_CMD1_8BIT 0x00000400 /* 8-bit crypto feedback */ +#define SAFE_SA_CMD1_1BIT 0x00000800 /* 1-bit crypto feedback */ +#define SAFE_SA_CMD1_128BIT 0x00000c00 /* 128-bit crypto feedback */ +#define SAFE_SA_CMD1_OPTIONS 0x00001000 /* HMAC/options mutable bit */ +#define SAFE_SA_CMD1_HMAC SAFE_SA_CMD1_OPTIONS +#define SAFE_SA_CMD1_SAREV1 0x00008000 /* SA Revision 1 */ +#define SAFE_SA_CMD1_OFFSET 0x00ff0000 /* hash/crypto offset(dwords) */ +#define SAFE_SA_CMD1_OFFSET_S 16 +#define SAFE_SA_CMD1_AESKEYLEN 0x0f000000 /* AES key length */ +#define SAFE_SA_CMD1_AES128 0x02000000 /* 128-bit AES key */ +#define SAFE_SA_CMD1_AES192 0x03000000 /* 192-bit AES key */ +#define SAFE_SA_CMD1_AES256 0x04000000 /* 256-bit AES key */ + +/* + * Security Associate State Record (Rev 1). + */ +struct safe_sastate { + u_int32_t sa_saved_iv[4]; /* saved IV (DES/3DES/AES) */ + u_int32_t sa_saved_hashbc; /* saved hash byte count */ + u_int32_t sa_saved_indigest[5]; /* saved inner digest */ +}; +#endif /* _SAFE_SAFEREG_H_ */ diff --git a/target/linux/generic-2.4/files/crypto/ocf/safe/safevar.h b/target/linux/generic-2.4/files/crypto/ocf/safe/safevar.h new file mode 100644 index 0000000000..9039a5d31b --- /dev/null +++ b/target/linux/generic-2.4/files/crypto/ocf/safe/safevar.h @@ -0,0 +1,230 @@ +/*- + * The linux port of this code done by David McCullough + * Copyright (C) 2004-2010 David McCullough + * The license and original author are listed below. + * + * Copyright (c) 2003 Sam Leffler, Errno Consulting + * Copyright (c) 2003 Global Technology Associates, Inc. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * + * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + * + * $FreeBSD: src/sys/dev/safe/safevar.h,v 1.2 2006/05/17 18:34:26 pjd Exp $ + */ +#ifndef _SAFE_SAFEVAR_H_ +#define _SAFE_SAFEVAR_H_ + +/* Maximum queue length */ +#ifndef SAFE_MAX_NQUEUE +#define SAFE_MAX_NQUEUE 60 +#endif + +#define SAFE_MAX_PART 64 /* Maximum scatter/gather depth */ +#define SAFE_DMA_BOUNDARY 0 /* No boundary for source DMA ops */ +#define SAFE_MAX_DSIZE 2048 /* MCLBYTES Fixed scatter particle size */ +#define SAFE_MAX_SSIZE 0x0ffff /* Maximum gather particle size */ +#define SAFE_MAX_DMA 0xfffff /* Maximum PE operand size (20 bits) */ +/* total src+dst particle descriptors */ +#define SAFE_TOTAL_DPART (SAFE_MAX_NQUEUE * SAFE_MAX_PART) +#define SAFE_TOTAL_SPART (SAFE_MAX_NQUEUE * SAFE_MAX_PART) + +#define SAFE_RNG_MAXBUFSIZ 128 /* 32-bit words */ + +#define SAFE_CARD(sid) (((sid) & 0xf0000000) >> 28) +#define SAFE_SESSION(sid) ( (sid) & 0x0fffffff) +#define SAFE_SID(crd, sesn) (((crd) << 28) | ((sesn) & 0x0fffffff)) + +#define SAFE_DEF_RTY 0xff /* PCI Retry Timeout */ +#define SAFE_DEF_TOUT 0xff /* PCI TRDY Timeout */ +#define SAFE_DEF_CACHELINE 0x01 /* Cache Line setting */ + +#ifdef __KERNEL__ +/* + * State associated with the allocation of each chunk + * of memory setup for DMA. + */ +struct safe_dma_alloc { + dma_addr_t dma_paddr; + void *dma_vaddr; +}; + +/* + * Cryptographic operand state. One of these exists for each + * source and destination operand passed in from the crypto + * subsystem. When possible source and destination operands + * refer to the same memory. More often they are distinct. + * We track the virtual address of each operand as well as + * where each is mapped for DMA. + */ +struct safe_operand { + union { + struct sk_buff *skb; + struct uio *io; + } u; + void *map; + int mapsize; /* total number of bytes in segs */ + struct { + dma_addr_t ds_addr; + int ds_len; + int ds_tlen; + } segs[SAFE_MAX_PART]; + int nsegs; +}; + +/* + * Packet engine ring entry and cryptographic operation state. + * The packet engine requires a ring of descriptors that contain + * pointers to various cryptographic state. However the ring + * configuration register allows you to specify an arbitrary size + * for ring entries. We use this feature to collect most of the + * state for each cryptographic request into one spot. Other than + * ring entries only the ``particle descriptors'' (scatter/gather + * lists) and the actual operand data are kept separate. The + * particle descriptors must also be organized in rings. The + * operand data can be located aribtrarily (modulo alignment constraints). + * + * Note that the descriptor ring is mapped onto the PCI bus so + * the hardware can DMA data. This means the entire ring must be + * contiguous. + */ +struct safe_ringentry { + struct safe_desc re_desc; /* command descriptor */ + struct safe_sarec re_sa; /* SA record */ + struct safe_sastate re_sastate; /* SA state record */ + + struct cryptop *re_crp; /* crypto operation */ + + struct safe_operand re_src; /* source operand */ + struct safe_operand re_dst; /* destination operand */ + + int re_sesn; /* crypto session ID */ + int re_flags; +#define SAFE_QFLAGS_COPYOUTIV 0x1 /* copy back on completion */ +#define SAFE_QFLAGS_COPYOUTICV 0x2 /* copy back on completion */ +}; + +#define re_src_skb re_src.u.skb +#define re_src_io re_src.u.io +#define re_src_map re_src.map +#define re_src_nsegs re_src.nsegs +#define re_src_segs re_src.segs +#define re_src_mapsize re_src.mapsize + +#define re_dst_skb re_dst.u.skb +#define re_dst_io re_dst.u.io +#define re_dst_map re_dst.map +#define re_dst_nsegs re_dst.nsegs +#define re_dst_segs re_dst.segs +#define re_dst_mapsize re_dst.mapsize + +struct rndstate_test; + +struct safe_session { + u_int32_t ses_used; + u_int32_t ses_klen; /* key length in bits */ + u_int32_t ses_key[8]; /* DES/3DES/AES key */ + u_int32_t ses_mlen; /* hmac length in bytes */ + u_int32_t ses_hminner[5]; /* hmac inner state */ + u_int32_t ses_hmouter[5]; /* hmac outer state */ + u_int32_t ses_iv[4]; /* DES/3DES/AES iv */ +}; + +struct safe_pkq { + struct list_head pkq_list; + struct cryptkop *pkq_krp; +}; + +struct safe_softc { + softc_device_decl sc_dev; + u32 sc_irq; + + struct pci_dev *sc_pcidev; + ocf_iomem_t sc_base_addr; + + u_int sc_chiprev; /* major/minor chip revision */ + int sc_flags; /* device specific flags */ +#define SAFE_FLAGS_KEY 0x01 /* has key accelerator */ +#define SAFE_FLAGS_RNG 0x02 /* hardware rng */ + int sc_suspended; + int sc_needwakeup; /* notify crypto layer */ + int32_t sc_cid; /* crypto tag */ + + struct safe_dma_alloc sc_ringalloc; /* PE ring allocation state */ + struct safe_ringentry *sc_ring; /* PE ring */ + struct safe_ringentry *sc_ringtop; /* PE ring top */ + struct safe_ringentry *sc_front; /* next free entry */ + struct safe_ringentry *sc_back; /* next pending entry */ + int sc_nqchip; /* # passed to chip */ + spinlock_t sc_ringmtx; /* PE ring lock */ + struct safe_pdesc *sc_spring; /* src particle ring */ + struct safe_pdesc *sc_springtop; /* src particle ring top */ + struct safe_pdesc *sc_spfree; /* next free src particle */ + struct safe_dma_alloc sc_spalloc; /* src particle ring state */ + struct safe_pdesc *sc_dpring; /* dest particle ring */ + struct safe_pdesc *sc_dpringtop; /* dest particle ring top */ + struct safe_pdesc *sc_dpfree; /* next free dest particle */ + struct safe_dma_alloc sc_dpalloc; /* dst particle ring state */ + int sc_nsessions; /* # of sessions */ + struct safe_session *sc_sessions; /* sessions */ + + struct timer_list sc_pkto; /* PK polling */ + spinlock_t sc_pkmtx; /* PK lock */ + struct list_head sc_pkq; /* queue of PK requests */ + struct safe_pkq *sc_pkq_cur; /* current processing request */ + u_int32_t sc_pk_reslen, sc_pk_resoff; + + int sc_max_dsize; /* maximum safe DMA size */ +}; +#endif /* __KERNEL__ */ + +struct safe_stats { + u_int64_t st_ibytes; + u_int64_t st_obytes; + u_int32_t st_ipackets; + u_int32_t st_opackets; + u_int32_t st_invalid; /* invalid argument */ + u_int32_t st_badsession; /* invalid session id */ + u_int32_t st_badflags; /* flags indicate !(mbuf | uio) */ + u_int32_t st_nodesc; /* op submitted w/o descriptors */ + u_int32_t st_badalg; /* unsupported algorithm */ + u_int32_t st_ringfull; /* PE descriptor ring full */ + u_int32_t st_peoperr; /* PE marked error */ + u_int32_t st_dmaerr; /* PE DMA error */ + u_int32_t st_bypasstoobig; /* bypass > 96 bytes */ + u_int32_t st_skipmismatch; /* enc part begins before auth part */ + u_int32_t st_lenmismatch; /* enc length different auth length */ + u_int32_t st_coffmisaligned; /* crypto offset not 32-bit aligned */ + u_int32_t st_cofftoobig; /* crypto offset > 255 words */ + u_int32_t st_iovmisaligned; /* iov op not aligned */ + u_int32_t st_iovnotuniform; /* iov op not suitable */ + u_int32_t st_unaligned; /* unaligned src caused copy */ + u_int32_t st_notuniform; /* non-uniform src caused copy */ + u_int32_t st_nomap; /* bus_dmamap_create failed */ + u_int32_t st_noload; /* bus_dmamap_load_* failed */ + u_int32_t st_nombuf; /* MGET* failed */ + u_int32_t st_nomcl; /* MCLGET* failed */ + u_int32_t st_maxqchip; /* max mcr1 ops out for processing */ + u_int32_t st_rng; /* RNG requests */ + u_int32_t st_rngalarm; /* RNG alarm requests */ + u_int32_t st_noicvcopy; /* ICV data copies suppressed */ +}; +#endif /* _SAFE_SAFEVAR_H_ */ diff --git a/target/linux/generic-2.4/files/crypto/ocf/safe/sha1.c b/target/linux/generic-2.4/files/crypto/ocf/safe/sha1.c new file mode 100644 index 0000000000..4e360e20db --- /dev/null +++ b/target/linux/generic-2.4/files/crypto/ocf/safe/sha1.c @@ -0,0 +1,279 @@ +/* $KAME: sha1.c,v 1.5 2000/11/08 06:13:08 itojun Exp $ */ +/* + * Copyright (C) 1995, 1996, 1997, and 1998 WIDE Project. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. Neither the name of the project nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE PROJECT AND CONTRIBUTORS ``AS IS'' AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE PROJECT OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + */ + +/* + * FIPS pub 180-1: Secure Hash Algorithm (SHA-1) + * based on: http://csrc.nist.gov/fips/fip180-1.txt + * implemented by Jun-ichiro itojun Itoh + */ + +#if 0 +#include +__FBSDID("$FreeBSD: src/sys/crypto/sha1.c,v 1.9 2003/06/10 21:36:57 obrien Exp $"); + +#include +#include +#include +#include + +#include +#endif + +/* sanity check */ +#if BYTE_ORDER != BIG_ENDIAN +# if BYTE_ORDER != LITTLE_ENDIAN +# define unsupported 1 +# endif +#endif + +#ifndef unsupported + +/* constant table */ +static u_int32_t _K[] = { 0x5a827999, 0x6ed9eba1, 0x8f1bbcdc, 0xca62c1d6 }; +#define K(t) _K[(t) / 20] + +#define F0(b, c, d) (((b) & (c)) | ((~(b)) & (d))) +#define F1(b, c, d) (((b) ^ (c)) ^ (d)) +#define F2(b, c, d) (((b) & (c)) | ((b) & (d)) | ((c) & (d))) +#define F3(b, c, d) (((b) ^ (c)) ^ (d)) + +#define S(n, x) (((x) << (n)) | ((x) >> (32 - n))) + +#undef H +#define H(n) (ctxt->h.b32[(n)]) +#define COUNT (ctxt->count) +#define BCOUNT (ctxt->c.b64[0] / 8) +#define W(n) (ctxt->m.b32[(n)]) + +#define PUTBYTE(x) { \ + ctxt->m.b8[(COUNT % 64)] = (x); \ + COUNT++; \ + COUNT %= 64; \ + ctxt->c.b64[0] += 8; \ + if (COUNT % 64 == 0) \ + sha1_step(ctxt); \ + } + +#define PUTPAD(x) { \ + ctxt->m.b8[(COUNT % 64)] = (x); \ + COUNT++; \ + COUNT %= 64; \ + if (COUNT % 64 == 0) \ + sha1_step(ctxt); \ + } + +static void sha1_step(struct sha1_ctxt *); + +static void +sha1_step(ctxt) + struct sha1_ctxt *ctxt; +{ + u_int32_t a, b, c, d, e; + size_t t, s; + u_int32_t tmp; + +#if BYTE_ORDER == LITTLE_ENDIAN + struct sha1_ctxt tctxt; + bcopy(&ctxt->m.b8[0], &tctxt.m.b8[0], 64); + ctxt->m.b8[0] = tctxt.m.b8[3]; ctxt->m.b8[1] = tctxt.m.b8[2]; + ctxt->m.b8[2] = tctxt.m.b8[1]; ctxt->m.b8[3] = tctxt.m.b8[0]; + ctxt->m.b8[4] = tctxt.m.b8[7]; ctxt->m.b8[5] = tctxt.m.b8[6]; + ctxt->m.b8[6] = tctxt.m.b8[5]; ctxt->m.b8[7] = tctxt.m.b8[4]; + ctxt->m.b8[8] = tctxt.m.b8[11]; ctxt->m.b8[9] = tctxt.m.b8[10]; + ctxt->m.b8[10] = tctxt.m.b8[9]; ctxt->m.b8[11] = tctxt.m.b8[8]; + ctxt->m.b8[12] = tctxt.m.b8[15]; ctxt->m.b8[13] = tctxt.m.b8[14]; + ctxt->m.b8[14] = tctxt.m.b8[13]; ctxt->m.b8[15] = tctxt.m.b8[12]; + ctxt->m.b8[16] = tctxt.m.b8[19]; ctxt->m.b8[17] = tctxt.m.b8[18]; + ctxt->m.b8[18] = tctxt.m.b8[17]; ctxt->m.b8[19] = tctxt.m.b8[16]; + ctxt->m.b8[20] = tctxt.m.b8[23]; ctxt->m.b8[21] = tctxt.m.b8[22]; + ctxt->m.b8[22] = tctxt.m.b8[21]; ctxt->m.b8[23] = tctxt.m.b8[20]; + ctxt->m.b8[24] = tctxt.m.b8[27]; ctxt->m.b8[25] = tctxt.m.b8[26]; + ctxt->m.b8[26] = tctxt.m.b8[25]; ctxt->m.b8[27] = tctxt.m.b8[24]; + ctxt->m.b8[28] = tctxt.m.b8[31]; ctxt->m.b8[29] = tctxt.m.b8[30]; + ctxt->m.b8[30] = tctxt.m.b8[29]; ctxt->m.b8[31] = tctxt.m.b8[28]; + ctxt->m.b8[32] = tctxt.m.b8[35]; ctxt->m.b8[33] = tctxt.m.b8[34]; + ctxt->m.b8[34] = tctxt.m.b8[33]; ctxt->m.b8[35] = tctxt.m.b8[32]; + ctxt->m.b8[36] = tctxt.m.b8[39]; ctxt->m.b8[37] = tctxt.m.b8[38]; + ctxt->m.b8[38] = tctxt.m.b8[37]; ctxt->m.b8[39] = tctxt.m.b8[36]; + ctxt->m.b8[40] = tctxt.m.b8[43]; ctxt->m.b8[41] = tctxt.m.b8[42]; + ctxt->m.b8[42] = tctxt.m.b8[41]; ctxt->m.b8[43] = tctxt.m.b8[40]; + ctxt->m.b8[44] = tctxt.m.b8[47]; ctxt->m.b8[45] = tctxt.m.b8[46]; + ctxt->m.b8[46] = tctxt.m.b8[45]; ctxt->m.b8[47] = tctxt.m.b8[44]; + ctxt->m.b8[48] = tctxt.m.b8[51]; ctxt->m.b8[49] = tctxt.m.b8[50]; + ctxt->m.b8[50] = tctxt.m.b8[49]; ctxt->m.b8[51] = tctxt.m.b8[48]; + ctxt->m.b8[52] = tctxt.m.b8[55]; ctxt->m.b8[53] = tctxt.m.b8[54]; + ctxt->m.b8[54] = tctxt.m.b8[53]; ctxt->m.b8[55] = tctxt.m.b8[52]; + ctxt->m.b8[56] = tctxt.m.b8[59]; ctxt->m.b8[57] = tctxt.m.b8[58]; + ctxt->m.b8[58] = tctxt.m.b8[57]; ctxt->m.b8[59] = tctxt.m.b8[56]; + ctxt->m.b8[60] = tctxt.m.b8[63]; ctxt->m.b8[61] = tctxt.m.b8[62]; + ctxt->m.b8[62] = tctxt.m.b8[61]; ctxt->m.b8[63] = tctxt.m.b8[60]; +#endif + + a = H(0); b = H(1); c = H(2); d = H(3); e = H(4); + + for (t = 0; t < 20; t++) { + s = t & 0x0f; + if (t >= 16) { + W(s) = S(1, W((s+13) & 0x0f) ^ W((s+8) & 0x0f) ^ W((s+2) & 0x0f) ^ W(s)); + } + tmp = S(5, a) + F0(b, c, d) + e + W(s) + K(t); + e = d; d = c; c = S(30, b); b = a; a = tmp; + } + for (t = 20; t < 40; t++) { + s = t & 0x0f; + W(s) = S(1, W((s+13) & 0x0f) ^ W((s+8) & 0x0f) ^ W((s+2) & 0x0f) ^ W(s)); + tmp = S(5, a) + F1(b, c, d) + e + W(s) + K(t); + e = d; d = c; c = S(30, b); b = a; a = tmp; + } + for (t = 40; t < 60; t++) { + s = t & 0x0f; + W(s) = S(1, W((s+13) & 0x0f) ^ W((s+8) & 0x0f) ^ W((s+2) & 0x0f) ^ W(s)); + tmp = S(5, a) + F2(b, c, d) + e + W(s) + K(t); + e = d; d = c; c = S(30, b); b = a; a = tmp; + } + for (t = 60; t < 80; t++) { + s = t & 0x0f; + W(s) = S(1, W((s+13) & 0x0f) ^ W((s+8) & 0x0f) ^ W((s+2) & 0x0f) ^ W(s)); + tmp = S(5, a) + F3(b, c, d) + e + W(s) + K(t); + e = d; d = c; c = S(30, b); b = a; a = tmp; + } + + H(0) = H(0) + a; + H(1) = H(1) + b; + H(2) = H(2) + c; + H(3) = H(3) + d; + H(4) = H(4) + e; + + bzero(&ctxt->m.b8[0], 64); +} + +/*------------------------------------------------------------*/ + +void +sha1_init(ctxt) + struct sha1_ctxt *ctxt; +{ + bzero(ctxt, sizeof(struct sha1_ctxt)); + H(0) = 0x67452301; + H(1) = 0xefcdab89; + H(2) = 0x98badcfe; + H(3) = 0x10325476; + H(4) = 0xc3d2e1f0; +} + +void +sha1_pad(ctxt) + struct sha1_ctxt *ctxt; +{ + size_t padlen; /*pad length in bytes*/ + size_t padstart; + + PUTPAD(0x80); + + padstart = COUNT % 64; + padlen = 64 - padstart; + if (padlen < 8) { + bzero(&ctxt->m.b8[padstart], padlen); + COUNT += padlen; + COUNT %= 64; + sha1_step(ctxt); + padstart = COUNT % 64; /* should be 0 */ + padlen = 64 - padstart; /* should be 64 */ + } + bzero(&ctxt->m.b8[padstart], padlen - 8); + COUNT += (padlen - 8); + COUNT %= 64; +#if BYTE_ORDER == BIG_ENDIAN + PUTPAD(ctxt->c.b8[0]); PUTPAD(ctxt->c.b8[1]); + PUTPAD(ctxt->c.b8[2]); PUTPAD(ctxt->c.b8[3]); + PUTPAD(ctxt->c.b8[4]); PUTPAD(ctxt->c.b8[5]); + PUTPAD(ctxt->c.b8[6]); PUTPAD(ctxt->c.b8[7]); +#else + PUTPAD(ctxt->c.b8[7]); PUTPAD(ctxt->c.b8[6]); + PUTPAD(ctxt->c.b8[5]); PUTPAD(ctxt->c.b8[4]); + PUTPAD(ctxt->c.b8[3]); PUTPAD(ctxt->c.b8[2]); + PUTPAD(ctxt->c.b8[1]); PUTPAD(ctxt->c.b8[0]); +#endif +} + +void +sha1_loop(ctxt, input, len) + struct sha1_ctxt *ctxt; + const u_int8_t *input; + size_t len; +{ + size_t gaplen; + size_t gapstart; + size_t off; + size_t copysiz; + + off = 0; + + while (off < len) { + gapstart = COUNT % 64; + gaplen = 64 - gapstart; + + copysiz = (gaplen < len - off) ? gaplen : len - off; + bcopy(&input[off], &ctxt->m.b8[gapstart], copysiz); + COUNT += copysiz; + COUNT %= 64; + ctxt->c.b64[0] += copysiz * 8; + if (COUNT % 64 == 0) + sha1_step(ctxt); + off += copysiz; + } +} + +void +sha1_result(ctxt, digest0) + struct sha1_ctxt *ctxt; + caddr_t digest0; +{ + u_int8_t *digest; + + digest = (u_int8_t *)digest0; + sha1_pad(ctxt); +#if BYTE_ORDER == BIG_ENDIAN + bcopy(&ctxt->h.b8[0], digest, 20); +#else + digest[0] = ctxt->h.b8[3]; digest[1] = ctxt->h.b8[2]; + digest[2] = ctxt->h.b8[1]; digest[3] = ctxt->h.b8[0]; + digest[4] = ctxt->h.b8[7]; digest[5] = ctxt->h.b8[6]; + digest[6] = ctxt->h.b8[5]; digest[7] = ctxt->h.b8[4]; + digest[8] = ctxt->h.b8[11]; digest[9] = ctxt->h.b8[10]; + digest[10] = ctxt->h.b8[9]; digest[11] = ctxt->h.b8[8]; + digest[12] = ctxt->h.b8[15]; digest[13] = ctxt->h.b8[14]; + digest[14] = ctxt->h.b8[13]; digest[15] = ctxt->h.b8[12]; + digest[16] = ctxt->h.b8[19]; digest[17] = ctxt->h.b8[18]; + digest[18] = ctxt->h.b8[17]; digest[19] = ctxt->h.b8[16]; +#endif +} + +#endif /*unsupported*/ diff --git a/target/linux/generic-2.4/files/crypto/ocf/safe/sha1.h b/target/linux/generic-2.4/files/crypto/ocf/safe/sha1.h new file mode 100644 index 0000000000..0e19d9071f --- /dev/null +++ b/target/linux/generic-2.4/files/crypto/ocf/safe/sha1.h @@ -0,0 +1,72 @@ +/* $FreeBSD: src/sys/crypto/sha1.h,v 1.8 2002/03/20 05:13:50 alfred Exp $ */ +/* $KAME: sha1.h,v 1.5 2000/03/27 04:36:23 sumikawa Exp $ */ + +/* + * Copyright (C) 1995, 1996, 1997, and 1998 WIDE Project. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. Neither the name of the project nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE PROJECT AND CONTRIBUTORS ``AS IS'' AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE PROJECT OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + */ +/* + * FIPS pub 180-1: Secure Hash Algorithm (SHA-1) + * based on: http://csrc.nist.gov/fips/fip180-1.txt + * implemented by Jun-ichiro itojun Itoh + */ + +#ifndef _NETINET6_SHA1_H_ +#define _NETINET6_SHA1_H_ + +struct sha1_ctxt { + union { + u_int8_t b8[20]; + u_int32_t b32[5]; + } h; + union { + u_int8_t b8[8]; + u_int64_t b64[1]; + } c; + union { + u_int8_t b8[64]; + u_int32_t b32[16]; + } m; + u_int8_t count; +}; + +#ifdef __KERNEL__ +extern void sha1_init(struct sha1_ctxt *); +extern void sha1_pad(struct sha1_ctxt *); +extern void sha1_loop(struct sha1_ctxt *, const u_int8_t *, size_t); +extern void sha1_result(struct sha1_ctxt *, caddr_t); + +/* compatibilty with other SHA1 source codes */ +typedef struct sha1_ctxt SHA1_CTX; +#define SHA1Init(x) sha1_init((x)) +#define SHA1Update(x, y, z) sha1_loop((x), (y), (z)) +#define SHA1Final(x, y) sha1_result((y), (x)) +#endif /* __KERNEL__ */ + +#define SHA1_RESULTLEN (160/8) + +#endif /*_NETINET6_SHA1_H_*/ diff --git a/target/linux/generic-2.4/files/crypto/ocf/talitos/Makefile b/target/linux/generic-2.4/files/crypto/ocf/talitos/Makefile new file mode 100644 index 0000000000..2591b8aef5 --- /dev/null +++ b/target/linux/generic-2.4/files/crypto/ocf/talitos/Makefile @@ -0,0 +1,12 @@ +# for SGlinux builds +-include $(ROOTDIR)/modules/.config + +obj-$(CONFIG_OCF_TALITOS) += talitos.o + +obj ?= . +EXTRA_CFLAGS += -I$(obj)/.. -I$(obj)/ + +ifdef TOPDIR +-include $(TOPDIR)/Rules.make +endif + diff --git a/target/linux/generic-2.4/files/crypto/ocf/talitos/talitos.c b/target/linux/generic-2.4/files/crypto/ocf/talitos/talitos.c new file mode 100644 index 0000000000..94046343ef --- /dev/null +++ b/target/linux/generic-2.4/files/crypto/ocf/talitos/talitos.c @@ -0,0 +1,1359 @@ +/* + * crypto/ocf/talitos/talitos.c + * + * An OCF-Linux module that uses Freescale's SEC to do the crypto. + * Based on crypto/ocf/hifn and crypto/ocf/safe OCF drivers + * + * Copyright (c) 2006 Freescale Semiconductor, Inc. + * + * This code written by Kim A. B. Phillips + * some code copied from files with the following: + * Copyright (C) 2004-2007 David McCullough + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. The name of the author may not be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR + * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES + * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. + * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * --------------------------------------------------------------------------- + * + * NOTES: + * + * The Freescale SEC (also known as 'talitos') resides on the + * internal bus, and runs asynchronous to the processor core. It has + * a wide gamut of cryptographic acceleration features, including single- + * pass IPsec (also known as algorithm chaining). To properly utilize + * all of the SEC's performance enhancing features, further reworking + * of higher level code (framework, applications) will be necessary. + * + * The following table shows which SEC version is present in which devices: + * + * Devices SEC version + * + * 8272, 8248 SEC 1.0 + * 885, 875 SEC 1.2 + * 8555E, 8541E SEC 2.0 + * 8349E SEC 2.01 + * 8548E SEC 2.1 + * + * The following table shows the features offered by each SEC version: + * + * Max. chan- + * version Bus I/F Clock nels DEU AESU AFEU MDEU PKEU RNG KEU + * + * SEC 1.0 internal 64b 100MHz 4 1 1 1 1 1 1 0 + * SEC 1.2 internal 32b 66MHz 1 1 1 0 1 0 0 0 + * SEC 2.0 internal 64b 166MHz 4 1 1 1 1 1 1 0 + * SEC 2.01 internal 64b 166MHz 4 1 1 1 1 1 1 0 + * SEC 2.1 internal 64b 333MHz 4 1 1 1 1 1 1 1 + * + * Each execution unit in the SEC has two modes of execution; channel and + * slave/debug. This driver employs the channel infrastructure in the + * device for convenience. Only the RNG is directly accessed due to the + * convenience of its random fifo pool. The relationship between the + * channels and execution units is depicted in the following diagram: + * + * ------- ------------ + * ---| ch0 |---| | + * ------- | | + * | |------+-------+-------+-------+------------ + * ------- | | | | | | | + * ---| ch1 |---| | | | | | | + * ------- | | ------ ------ ------ ------ ------ + * |controller| |DEU | |AESU| |MDEU| |PKEU| ... |RNG | + * ------- | | ------ ------ ------ ------ ------ + * ---| ch2 |---| | | | | | | + * ------- | | | | | | | + * | |------+-------+-------+-------+------------ + * ------- | | + * ---| ch3 |---| | + * ------- ------------ + * + * Channel ch0 may drive an aes operation to the aes unit (AESU), + * and, at the same time, ch1 may drive a message digest operation + * to the mdeu. Each channel has an input descriptor FIFO, and the + * FIFO can contain, e.g. on the 8541E, up to 24 entries, before a + * a buffer overrun error is triggered. The controller is responsible + * for fetching the data from descriptor pointers, and passing the + * data to the appropriate EUs. The controller also writes the + * cryptographic operation's result to memory. The SEC notifies + * completion by triggering an interrupt and/or setting the 1st byte + * of the hdr field to 0xff. + * + * TODO: + * o support more algorithms + * o support more versions of the SEC + * o add support for linux 2.4 + * o scatter-gather (sg) support + * o add support for public key ops (PKEU) + * o add statistics + */ + +#ifndef AUTOCONF_INCLUDED +#include +#endif +#include +#include +#include +#include +#include +#include +#include +#include /* dma_map_single() */ +#include + +#include +#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,15) +#include +#endif + +#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,19) +#include +#endif + +#include +#include + +#define DRV_NAME "talitos" + +#include "talitos_dev.h" +#include "talitos_soft.h" + +#define read_random(p,l) get_random_bytes(p,l) + +const char talitos_driver_name[] = "Talitos OCF"; +const char talitos_driver_version[] = "0.2"; + +static int talitos_newsession(device_t dev, u_int32_t *sidp, + struct cryptoini *cri); +static int talitos_freesession(device_t dev, u_int64_t tid); +static int talitos_process(device_t dev, struct cryptop *crp, int hint); +static void dump_talitos_status(struct talitos_softc *sc); +static int talitos_submit(struct talitos_softc *sc, struct talitos_desc *td, + int chsel); +static void talitos_doneprocessing(struct talitos_softc *sc); +static void talitos_init_device(struct talitos_softc *sc); +static void talitos_reset_device_master(struct talitos_softc *sc); +static void talitos_reset_device(struct talitos_softc *sc); +static void talitos_errorprocessing(struct talitos_softc *sc); +#ifdef CONFIG_PPC_MERGE +static int talitos_probe(struct of_device *ofdev, const struct of_device_id *match); +static int talitos_remove(struct of_device *ofdev); +#else +static int talitos_probe(struct platform_device *pdev); +static int talitos_remove(struct platform_device *pdev); +#endif +#ifdef CONFIG_OCF_RANDOMHARVEST +static int talitos_read_random(void *arg, u_int32_t *buf, int maxwords); +static void talitos_rng_init(struct talitos_softc *sc); +#endif + +static device_method_t talitos_methods = { + /* crypto device methods */ + DEVMETHOD(cryptodev_newsession, talitos_newsession), + DEVMETHOD(cryptodev_freesession,talitos_freesession), + DEVMETHOD(cryptodev_process, talitos_process), +}; + +#define debug talitos_debug +int talitos_debug = 0; +module_param(talitos_debug, int, 0644); +MODULE_PARM_DESC(talitos_debug, "Enable debug"); + +static inline void talitos_write(volatile unsigned *addr, u32 val) +{ + out_be32(addr, val); +} + +static inline u32 talitos_read(volatile unsigned *addr) +{ + u32 val; + val = in_be32(addr); + return val; +} + +static void dump_talitos_status(struct talitos_softc *sc) +{ + unsigned int v, v_hi, i, *ptr; + v = talitos_read(sc->sc_base_addr + TALITOS_MCR); + v_hi = talitos_read(sc->sc_base_addr + TALITOS_MCR_HI); + printk(KERN_INFO "%s: MCR 0x%08x_%08x\n", + device_get_nameunit(sc->sc_cdev), v, v_hi); + v = talitos_read(sc->sc_base_addr + TALITOS_IMR); + v_hi = talitos_read(sc->sc_base_addr + TALITOS_IMR_HI); + printk(KERN_INFO "%s: IMR 0x%08x_%08x\n", + device_get_nameunit(sc->sc_cdev), v, v_hi); + v = talitos_read(sc->sc_base_addr + TALITOS_ISR); + v_hi = talitos_read(sc->sc_base_addr + TALITOS_ISR_HI); + printk(KERN_INFO "%s: ISR 0x%08x_%08x\n", + device_get_nameunit(sc->sc_cdev), v, v_hi); + for (i = 0; i < sc->sc_num_channels; i++) { + v = talitos_read(sc->sc_base_addr + i*TALITOS_CH_OFFSET + + TALITOS_CH_CDPR); + v_hi = talitos_read(sc->sc_base_addr + i*TALITOS_CH_OFFSET + + TALITOS_CH_CDPR_HI); + printk(KERN_INFO "%s: CDPR ch%d 0x%08x_%08x\n", + device_get_nameunit(sc->sc_cdev), i, v, v_hi); + } + for (i = 0; i < sc->sc_num_channels; i++) { + v = talitos_read(sc->sc_base_addr + i*TALITOS_CH_OFFSET + + TALITOS_CH_CCPSR); + v_hi = talitos_read(sc->sc_base_addr + i*TALITOS_CH_OFFSET + + TALITOS_CH_CCPSR_HI); + printk(KERN_INFO "%s: CCPSR ch%d 0x%08x_%08x\n", + device_get_nameunit(sc->sc_cdev), i, v, v_hi); + } + ptr = sc->sc_base_addr + TALITOS_CH_DESCBUF; + for (i = 0; i < 16; i++) { + v = talitos_read(ptr++); v_hi = talitos_read(ptr++); + printk(KERN_INFO "%s: DESCBUF ch0 0x%08x_%08x (tdp%02d)\n", + device_get_nameunit(sc->sc_cdev), v, v_hi, i); + } + return; +} + + +#ifdef CONFIG_OCF_RANDOMHARVEST +/* + * pull random numbers off the RNG FIFO, not exceeding amount available + */ +static int +talitos_read_random(void *arg, u_int32_t *buf, int maxwords) +{ + struct talitos_softc *sc = (struct talitos_softc *) arg; + int rc; + u_int32_t v; + + DPRINTF("%s()\n", __FUNCTION__); + + /* check for things like FIFO underflow */ + v = talitos_read(sc->sc_base_addr + TALITOS_RNGISR_HI); + if (unlikely(v)) { + printk(KERN_ERR "%s: RNGISR_HI error %08x\n", + device_get_nameunit(sc->sc_cdev), v); + return 0; + } + /* + * OFL is number of available 64-bit words, + * shift and convert to a 32-bit word count + */ + v = talitos_read(sc->sc_base_addr + TALITOS_RNGSR_HI); + v = (v & TALITOS_RNGSR_HI_OFL) >> (16 - 1); + if (maxwords > v) + maxwords = v; + for (rc = 0; rc < maxwords; rc++) { + buf[rc] = talitos_read(sc->sc_base_addr + + TALITOS_RNG_FIFO + rc*sizeof(u_int32_t)); + } + if (maxwords & 1) { + /* + * RNG will complain with an AE in the RNGISR + * if we don't complete the pairs of 32-bit reads + * to its 64-bit register based FIFO + */ + v = talitos_read(sc->sc_base_addr + + TALITOS_RNG_FIFO + rc*sizeof(u_int32_t)); + } + + return rc; +} + +static void +talitos_rng_init(struct talitos_softc *sc) +{ + u_int32_t v; + + DPRINTF("%s()\n", __FUNCTION__); + /* reset RNG EU */ + v = talitos_read(sc->sc_base_addr + TALITOS_RNGRCR_HI); + v |= TALITOS_RNGRCR_HI_SR; + talitos_write(sc->sc_base_addr + TALITOS_RNGRCR_HI, v); + while ((talitos_read(sc->sc_base_addr + TALITOS_RNGSR_HI) + & TALITOS_RNGSR_HI_RD) == 0) + cpu_relax(); + /* + * we tell the RNG to start filling the RNG FIFO + * by writing the RNGDSR + */ + v = talitos_read(sc->sc_base_addr + TALITOS_RNGDSR_HI); + talitos_write(sc->sc_base_addr + TALITOS_RNGDSR_HI, v); + /* + * 64 bits of data will be pushed onto the FIFO every + * 256 SEC cycles until the FIFO is full. The RNG then + * attempts to keep the FIFO full. + */ + v = talitos_read(sc->sc_base_addr + TALITOS_RNGISR_HI); + if (v) { + printk(KERN_ERR "%s: RNGISR_HI error %08x\n", + device_get_nameunit(sc->sc_cdev), v); + return; + } + /* + * n.b. we need to add a FIPS test here - if the RNG is going + * to fail, it's going to fail at reset time + */ + return; +} +#endif /* CONFIG_OCF_RANDOMHARVEST */ + +/* + * Generate a new software session. + */ +static int +talitos_newsession(device_t dev, u_int32_t *sidp, struct cryptoini *cri) +{ + struct cryptoini *c, *encini = NULL, *macini = NULL; + struct talitos_softc *sc = device_get_softc(dev); + struct talitos_session *ses = NULL; + int sesn; + + DPRINTF("%s()\n", __FUNCTION__); + if (sidp == NULL || cri == NULL || sc == NULL) { + DPRINTF("%s,%d - EINVAL\n", __FILE__, __LINE__); + return EINVAL; + } + for (c = cri; c != NULL; c = c->cri_next) { + if (c->cri_alg == CRYPTO_MD5 || + c->cri_alg == CRYPTO_MD5_HMAC || + c->cri_alg == CRYPTO_SHA1 || + c->cri_alg == CRYPTO_SHA1_HMAC || + c->cri_alg == CRYPTO_NULL_HMAC) { + if (macini) + return EINVAL; + macini = c; + } else if (c->cri_alg == CRYPTO_DES_CBC || + c->cri_alg == CRYPTO_3DES_CBC || + c->cri_alg == CRYPTO_AES_CBC || + c->cri_alg == CRYPTO_NULL_CBC) { + if (encini) + return EINVAL; + encini = c; + } else { + DPRINTF("UNKNOWN c->cri_alg %d\n", encini->cri_alg); + return EINVAL; + } + } + if (encini == NULL && macini == NULL) + return EINVAL; + if (encini) { + /* validate key length */ + switch (encini->cri_alg) { + case CRYPTO_DES_CBC: + if (encini->cri_klen != 64) + return EINVAL; + break; + case CRYPTO_3DES_CBC: + if (encini->cri_klen != 192) { + return EINVAL; + } + break; + case CRYPTO_AES_CBC: + if (encini->cri_klen != 128 && + encini->cri_klen != 192 && + encini->cri_klen != 256) + return EINVAL; + break; + default: + DPRINTF("UNKNOWN encini->cri_alg %d\n", + encini->cri_alg); + return EINVAL; + } + } + + if (sc->sc_sessions == NULL) { + ses = sc->sc_sessions = (struct talitos_session *) + kmalloc(sizeof(struct talitos_session), SLAB_ATOMIC); + if (ses == NULL) + return ENOMEM; + memset(ses, 0, sizeof(struct talitos_session)); + sesn = 0; + sc->sc_nsessions = 1; + } else { + for (sesn = 0; sesn < sc->sc_nsessions; sesn++) { + if (sc->sc_sessions[sesn].ses_used == 0) { + ses = &sc->sc_sessions[sesn]; + break; + } + } + + if (ses == NULL) { + /* allocating session */ + sesn = sc->sc_nsessions; + ses = (struct talitos_session *) kmalloc( + (sesn + 1) * sizeof(struct talitos_session), + SLAB_ATOMIC); + if (ses == NULL) + return ENOMEM; + memset(ses, 0, + (sesn + 1) * sizeof(struct talitos_session)); + memcpy(ses, sc->sc_sessions, + sesn * sizeof(struct talitos_session)); + memset(sc->sc_sessions, 0, + sesn * sizeof(struct talitos_session)); + kfree(sc->sc_sessions); + sc->sc_sessions = ses; + ses = &sc->sc_sessions[sesn]; + sc->sc_nsessions++; + } + } + + ses->ses_used = 1; + + if (encini) { + /* get an IV */ + /* XXX may read fewer than requested */ + read_random(ses->ses_iv, sizeof(ses->ses_iv)); + + ses->ses_klen = (encini->cri_klen + 7) / 8; + memcpy(ses->ses_key, encini->cri_key, ses->ses_klen); + if (macini) { + /* doing hash on top of cipher */ + ses->ses_hmac_len = (macini->cri_klen + 7) / 8; + memcpy(ses->ses_hmac, macini->cri_key, + ses->ses_hmac_len); + } + } else if (macini) { + /* doing hash */ + ses->ses_klen = (macini->cri_klen + 7) / 8; + memcpy(ses->ses_key, macini->cri_key, ses->ses_klen); + } + + /* back compat way of determining MSC result len */ + if (macini) { + ses->ses_mlen = macini->cri_mlen; + if (ses->ses_mlen == 0) { + if (macini->cri_alg == CRYPTO_MD5_HMAC) + ses->ses_mlen = MD5_HASH_LEN; + else + ses->ses_mlen = SHA1_HASH_LEN; + } + } + + /* really should make up a template td here, + * and only fill things like i/o and direction in process() */ + + /* assign session ID */ + *sidp = TALITOS_SID(sc->sc_num, sesn); + return 0; +} + +/* + * Deallocate a session. + */ +static int +talitos_freesession(device_t dev, u_int64_t tid) +{ + struct talitos_softc *sc = device_get_softc(dev); + int session, ret; + u_int32_t sid = ((u_int32_t) tid) & 0xffffffff; + + if (sc == NULL) + return EINVAL; + session = TALITOS_SESSION(sid); + if (session < sc->sc_nsessions) { + memset(&sc->sc_sessions[session], 0, + sizeof(sc->sc_sessions[session])); + ret = 0; + } else + ret = EINVAL; + return ret; +} + +/* + * launch device processing - it will come back with done notification + * in the form of an interrupt and/or HDR_DONE_BITS in header + */ +static int +talitos_submit( + struct talitos_softc *sc, + struct talitos_desc *td, + int chsel) +{ + u_int32_t v; + + v = dma_map_single(NULL, td, sizeof(*td), DMA_TO_DEVICE); + talitos_write(sc->sc_base_addr + + chsel*TALITOS_CH_OFFSET + TALITOS_CH_FF, 0); + talitos_write(sc->sc_base_addr + + chsel*TALITOS_CH_OFFSET + TALITOS_CH_FF_HI, v); + return 0; +} + +static int +talitos_process(device_t dev, struct cryptop *crp, int hint) +{ + int i, err = 0, ivsize; + struct talitos_softc *sc = device_get_softc(dev); + struct cryptodesc *crd1, *crd2, *maccrd, *enccrd; + caddr_t iv; + struct talitos_session *ses; + struct talitos_desc *td; + unsigned long flags; + /* descriptor mappings */ + int hmac_key, hmac_data, cipher_iv, cipher_key, + in_fifo, out_fifo, cipher_iv_out; + static int chsel = -1; + + DPRINTF("%s()\n", __FUNCTION__); + + if (crp == NULL || crp->crp_callback == NULL || sc == NULL) { + return EINVAL; + } + crp->crp_etype = 0; + if (TALITOS_SESSION(crp->crp_sid) >= sc->sc_nsessions) { + return EINVAL; + } + + ses = &sc->sc_sessions[TALITOS_SESSION(crp->crp_sid)]; + + /* enter the channel scheduler */ + spin_lock_irqsave(&sc->sc_chnfifolock[sc->sc_num_channels], flags); + + /* reuse channel that already had/has requests for the required EU */ + for (i = 0; i < sc->sc_num_channels; i++) { + if (sc->sc_chnlastalg[i] == crp->crp_desc->crd_alg) + break; + } + if (i == sc->sc_num_channels) { + /* + * haven't seen this algo the last sc_num_channels or more + * use round robin in this case + * nb: sc->sc_num_channels must be power of 2 + */ + chsel = (chsel + 1) & (sc->sc_num_channels - 1); + } else { + /* + * matches channel with same target execution unit; + * use same channel in this case + */ + chsel = i; + } + sc->sc_chnlastalg[chsel] = crp->crp_desc->crd_alg; + + /* release the channel scheduler lock */ + spin_unlock_irqrestore(&sc->sc_chnfifolock[sc->sc_num_channels], flags); + + /* acquire the selected channel fifo lock */ + spin_lock_irqsave(&sc->sc_chnfifolock[chsel], flags); + + /* find and reserve next available descriptor-cryptop pair */ + for (i = 0; i < sc->sc_chfifo_len; i++) { + if (sc->sc_chnfifo[chsel][i].cf_desc.hdr == 0) { + /* + * ensure correct descriptor formation by + * avoiding inadvertently setting "optional" entries + * e.g. not using "optional" dptr2 for MD/HMAC descs + */ + memset(&sc->sc_chnfifo[chsel][i].cf_desc, + 0, sizeof(*td)); + /* reserve it with done notification request bit */ + sc->sc_chnfifo[chsel][i].cf_desc.hdr |= + TALITOS_DONE_NOTIFY; + break; + } + } + spin_unlock_irqrestore(&sc->sc_chnfifolock[chsel], flags); + + if (i == sc->sc_chfifo_len) { + /* fifo full */ + err = ERESTART; + goto errout; + } + + td = &sc->sc_chnfifo[chsel][i].cf_desc; + sc->sc_chnfifo[chsel][i].cf_crp = crp; + + crd1 = crp->crp_desc; + if (crd1 == NULL) { + err = EINVAL; + goto errout; + } + crd2 = crd1->crd_next; + /* prevent compiler warning */ + hmac_key = 0; + hmac_data = 0; + if (crd2 == NULL) { + td->hdr |= TD_TYPE_COMMON_NONSNOOP_NO_AFEU; + /* assign descriptor dword ptr mappings for this desc. type */ + cipher_iv = 1; + cipher_key = 2; + in_fifo = 3; + cipher_iv_out = 5; + if (crd1->crd_alg == CRYPTO_MD5_HMAC || + crd1->crd_alg == CRYPTO_SHA1_HMAC || + crd1->crd_alg == CRYPTO_SHA1 || + crd1->crd_alg == CRYPTO_MD5) { + out_fifo = 5; + maccrd = crd1; + enccrd = NULL; + } else if (crd1->crd_alg == CRYPTO_DES_CBC || + crd1->crd_alg == CRYPTO_3DES_CBC || + crd1->crd_alg == CRYPTO_AES_CBC || + crd1->crd_alg == CRYPTO_ARC4) { + out_fifo = 4; + maccrd = NULL; + enccrd = crd1; + } else { + DPRINTF("UNKNOWN crd1->crd_alg %d\n", crd1->crd_alg); + err = EINVAL; + goto errout; + } + } else { + if (sc->sc_desc_types & TALITOS_HAS_DT_IPSEC_ESP) { + td->hdr |= TD_TYPE_IPSEC_ESP; + } else { + DPRINTF("unimplemented: multiple descriptor ipsec\n"); + err = EINVAL; + goto errout; + } + /* assign descriptor dword ptr mappings for this desc. type */ + hmac_key = 0; + hmac_data = 1; + cipher_iv = 2; + cipher_key = 3; + in_fifo = 4; + out_fifo = 5; + cipher_iv_out = 6; + if ((crd1->crd_alg == CRYPTO_MD5_HMAC || + crd1->crd_alg == CRYPTO_SHA1_HMAC || + crd1->crd_alg == CRYPTO_MD5 || + crd1->crd_alg == CRYPTO_SHA1) && + (crd2->crd_alg == CRYPTO_DES_CBC || + crd2->crd_alg == CRYPTO_3DES_CBC || + crd2->crd_alg == CRYPTO_AES_CBC || + crd2->crd_alg == CRYPTO_ARC4) && + ((crd2->crd_flags & CRD_F_ENCRYPT) == 0)) { + maccrd = crd1; + enccrd = crd2; + } else if ((crd1->crd_alg == CRYPTO_DES_CBC || + crd1->crd_alg == CRYPTO_ARC4 || + crd1->crd_alg == CRYPTO_3DES_CBC || + crd1->crd_alg == CRYPTO_AES_CBC) && + (crd2->crd_alg == CRYPTO_MD5_HMAC || + crd2->crd_alg == CRYPTO_SHA1_HMAC || + crd2->crd_alg == CRYPTO_MD5 || + crd2->crd_alg == CRYPTO_SHA1) && + (crd1->crd_flags & CRD_F_ENCRYPT)) { + enccrd = crd1; + maccrd = crd2; + } else { + /* We cannot order the SEC as requested */ + printk("%s: cannot do the order\n", + device_get_nameunit(sc->sc_cdev)); + err = EINVAL; + goto errout; + } + } + /* assign in_fifo and out_fifo based on input/output struct type */ + if (crp->crp_flags & CRYPTO_F_SKBUF) { + /* using SKB buffers */ + struct sk_buff *skb = (struct sk_buff *)crp->crp_buf; + if (skb_shinfo(skb)->nr_frags) { + printk("%s: skb frags unimplemented\n", + device_get_nameunit(sc->sc_cdev)); + err = EINVAL; + goto errout; + } + td->ptr[in_fifo].ptr = dma_map_single(NULL, skb->data, + skb->len, DMA_TO_DEVICE); + td->ptr[in_fifo].len = skb->len; + td->ptr[out_fifo].ptr = dma_map_single(NULL, skb->data, + skb->len, DMA_TO_DEVICE); + td->ptr[out_fifo].len = skb->len; + td->ptr[hmac_data].ptr = dma_map_single(NULL, skb->data, + skb->len, DMA_TO_DEVICE); + } else if (crp->crp_flags & CRYPTO_F_IOV) { + /* using IOV buffers */ + struct uio *uiop = (struct uio *)crp->crp_buf; + if (uiop->uio_iovcnt > 1) { + printk("%s: iov frags unimplemented\n", + device_get_nameunit(sc->sc_cdev)); + err = EINVAL; + goto errout; + } + td->ptr[in_fifo].ptr = dma_map_single(NULL, + uiop->uio_iov->iov_base, crp->crp_ilen, DMA_TO_DEVICE); + td->ptr[in_fifo].len = crp->crp_ilen; + /* crp_olen is never set; always use crp_ilen */ + td->ptr[out_fifo].ptr = dma_map_single(NULL, + uiop->uio_iov->iov_base, + crp->crp_ilen, DMA_TO_DEVICE); + td->ptr[out_fifo].len = crp->crp_ilen; + } else { + /* using contig buffers */ + td->ptr[in_fifo].ptr = dma_map_single(NULL, + crp->crp_buf, crp->crp_ilen, DMA_TO_DEVICE); + td->ptr[in_fifo].len = crp->crp_ilen; + td->ptr[out_fifo].ptr = dma_map_single(NULL, + crp->crp_buf, crp->crp_ilen, DMA_TO_DEVICE); + td->ptr[out_fifo].len = crp->crp_ilen; + } + if (enccrd) { + switch (enccrd->crd_alg) { + case CRYPTO_3DES_CBC: + td->hdr |= TALITOS_MODE0_DEU_3DES; + /* FALLTHROUGH */ + case CRYPTO_DES_CBC: + td->hdr |= TALITOS_SEL0_DEU + | TALITOS_MODE0_DEU_CBC; + if (enccrd->crd_flags & CRD_F_ENCRYPT) + td->hdr |= TALITOS_MODE0_DEU_ENC; + ivsize = 2*sizeof(u_int32_t); + DPRINTF("%cDES ses %d ch %d len %d\n", + (td->hdr & TALITOS_MODE0_DEU_3DES)?'3':'1', + (u32)TALITOS_SESSION(crp->crp_sid), + chsel, td->ptr[in_fifo].len); + break; + case CRYPTO_AES_CBC: + td->hdr |= TALITOS_SEL0_AESU + | TALITOS_MODE0_AESU_CBC; + if (enccrd->crd_flags & CRD_F_ENCRYPT) + td->hdr |= TALITOS_MODE0_AESU_ENC; + ivsize = 4*sizeof(u_int32_t); + DPRINTF("AES ses %d ch %d len %d\n", + (u32)TALITOS_SESSION(crp->crp_sid), + chsel, td->ptr[in_fifo].len); + break; + default: + printk("%s: unimplemented enccrd->crd_alg %d\n", + device_get_nameunit(sc->sc_cdev), enccrd->crd_alg); + err = EINVAL; + goto errout; + } + /* + * Setup encrypt/decrypt state. When using basic ops + * we can't use an inline IV because hash/crypt offset + * must be from the end of the IV to the start of the + * crypt data and this leaves out the preceding header + * from the hash calculation. Instead we place the IV + * in the state record and set the hash/crypt offset to + * copy both the header+IV. + */ + if (enccrd->crd_flags & CRD_F_ENCRYPT) { + td->hdr |= TALITOS_DIR_OUTBOUND; + if (enccrd->crd_flags & CRD_F_IV_EXPLICIT) + iv = enccrd->crd_iv; + else + iv = (caddr_t) ses->ses_iv; + if ((enccrd->crd_flags & CRD_F_IV_PRESENT) == 0) { + crypto_copyback(crp->crp_flags, crp->crp_buf, + enccrd->crd_inject, ivsize, iv); + } + } else { + td->hdr |= TALITOS_DIR_INBOUND; + if (enccrd->crd_flags & CRD_F_IV_EXPLICIT) { + iv = enccrd->crd_iv; + bcopy(enccrd->crd_iv, iv, ivsize); + } else { + iv = (caddr_t) ses->ses_iv; + crypto_copydata(crp->crp_flags, crp->crp_buf, + enccrd->crd_inject, ivsize, iv); + } + } + td->ptr[cipher_iv].ptr = dma_map_single(NULL, iv, ivsize, + DMA_TO_DEVICE); + td->ptr[cipher_iv].len = ivsize; + /* + * we don't need the cipher iv out length/pointer + * field to do ESP IPsec. Therefore we set the len field as 0, + * which tells the SEC not to do anything with this len/ptr + * field. Previously, when length/pointer as pointing to iv, + * it gave us corruption of packets. + */ + td->ptr[cipher_iv_out].len = 0; + } + if (enccrd && maccrd) { + /* this is ipsec only for now */ + td->hdr |= TALITOS_SEL1_MDEU + | TALITOS_MODE1_MDEU_INIT + | TALITOS_MODE1_MDEU_PAD; + switch (maccrd->crd_alg) { + case CRYPTO_MD5: + td->hdr |= TALITOS_MODE1_MDEU_MD5; + break; + case CRYPTO_MD5_HMAC: + td->hdr |= TALITOS_MODE1_MDEU_MD5_HMAC; + break; + case CRYPTO_SHA1: + td->hdr |= TALITOS_MODE1_MDEU_SHA1; + break; + case CRYPTO_SHA1_HMAC: + td->hdr |= TALITOS_MODE1_MDEU_SHA1_HMAC; + break; + default: + /* We cannot order the SEC as requested */ + printk("%s: cannot do the order\n", + device_get_nameunit(sc->sc_cdev)); + err = EINVAL; + goto errout; + } + if ((maccrd->crd_alg == CRYPTO_MD5_HMAC) || + (maccrd->crd_alg == CRYPTO_SHA1_HMAC)) { + /* + * The offset from hash data to the start of + * crypt data is the difference in the skips. + */ + /* ipsec only for now */ + td->ptr[hmac_key].ptr = dma_map_single(NULL, + ses->ses_hmac, ses->ses_hmac_len, DMA_TO_DEVICE); + td->ptr[hmac_key].len = ses->ses_hmac_len; + td->ptr[in_fifo].ptr += enccrd->crd_skip; + td->ptr[in_fifo].len = enccrd->crd_len; + td->ptr[out_fifo].ptr += enccrd->crd_skip; + td->ptr[out_fifo].len = enccrd->crd_len; + /* bytes of HMAC to postpend to ciphertext */ + td->ptr[out_fifo].extent = ses->ses_mlen; + td->ptr[hmac_data].ptr += maccrd->crd_skip; + td->ptr[hmac_data].len = enccrd->crd_skip - maccrd->crd_skip; + } + if (enccrd->crd_flags & CRD_F_KEY_EXPLICIT) { + printk("%s: CRD_F_KEY_EXPLICIT unimplemented\n", + device_get_nameunit(sc->sc_cdev)); + } + } + if (!enccrd && maccrd) { + /* single MD5 or SHA */ + td->hdr |= TALITOS_SEL0_MDEU + | TALITOS_MODE0_MDEU_INIT + | TALITOS_MODE0_MDEU_PAD; + switch (maccrd->crd_alg) { + case CRYPTO_MD5: + td->hdr |= TALITOS_MODE0_MDEU_MD5; + DPRINTF("MD5 ses %d ch %d len %d\n", + (u32)TALITOS_SESSION(crp->crp_sid), + chsel, td->ptr[in_fifo].len); + break; + case CRYPTO_MD5_HMAC: + td->hdr |= TALITOS_MODE0_MDEU_MD5_HMAC; + break; + case CRYPTO_SHA1: + td->hdr |= TALITOS_MODE0_MDEU_SHA1; + DPRINTF("SHA1 ses %d ch %d len %d\n", + (u32)TALITOS_SESSION(crp->crp_sid), + chsel, td->ptr[in_fifo].len); + break; + case CRYPTO_SHA1_HMAC: + td->hdr |= TALITOS_MODE0_MDEU_SHA1_HMAC; + break; + default: + /* We cannot order the SEC as requested */ + DPRINTF("cannot do the order\n"); + err = EINVAL; + goto errout; + } + + if (crp->crp_flags & CRYPTO_F_IOV) + td->ptr[out_fifo].ptr += maccrd->crd_inject; + + if ((maccrd->crd_alg == CRYPTO_MD5_HMAC) || + (maccrd->crd_alg == CRYPTO_SHA1_HMAC)) { + td->ptr[hmac_key].ptr = dma_map_single(NULL, + ses->ses_hmac, ses->ses_hmac_len, + DMA_TO_DEVICE); + td->ptr[hmac_key].len = ses->ses_hmac_len; + } + } + else { + /* using process key (session data has duplicate) */ + td->ptr[cipher_key].ptr = dma_map_single(NULL, + enccrd->crd_key, (enccrd->crd_klen + 7) / 8, + DMA_TO_DEVICE); + td->ptr[cipher_key].len = (enccrd->crd_klen + 7) / 8; + } + /* descriptor complete - GO! */ + return talitos_submit(sc, td, chsel); + +errout: + if (err != ERESTART) { + crp->crp_etype = err; + crypto_done(crp); + } + return err; +} + +/* go through all channels descriptors, notifying OCF what has + * _and_hasn't_ successfully completed and reset the device + * (otherwise it's up to decoding desc hdrs!) + */ +static void talitos_errorprocessing(struct talitos_softc *sc) +{ + unsigned long flags; + int i, j; + + /* disable further scheduling until under control */ + spin_lock_irqsave(&sc->sc_chnfifolock[sc->sc_num_channels], flags); + + if (debug) dump_talitos_status(sc); + /* go through descriptors, try and salvage those successfully done, + * and EIO those that weren't + */ + for (i = 0; i < sc->sc_num_channels; i++) { + spin_lock_irqsave(&sc->sc_chnfifolock[i], flags); + for (j = 0; j < sc->sc_chfifo_len; j++) { + if (sc->sc_chnfifo[i][j].cf_desc.hdr) { + if ((sc->sc_chnfifo[i][j].cf_desc.hdr + & TALITOS_HDR_DONE_BITS) + != TALITOS_HDR_DONE_BITS) { + /* this one didn't finish */ + /* signify in crp->etype */ + sc->sc_chnfifo[i][j].cf_crp->crp_etype + = EIO; + } + } else + continue; /* free entry */ + /* either way, notify ocf */ + crypto_done(sc->sc_chnfifo[i][j].cf_crp); + /* and tag it available again + * + * memset to ensure correct descriptor formation by + * avoiding inadvertently setting "optional" entries + * e.g. not using "optional" dptr2 MD/HMAC processing + */ + memset(&sc->sc_chnfifo[i][j].cf_desc, + 0, sizeof(struct talitos_desc)); + } + spin_unlock_irqrestore(&sc->sc_chnfifolock[i], flags); + } + /* reset and initialize the SEC h/w device */ + talitos_reset_device(sc); + talitos_init_device(sc); +#ifdef CONFIG_OCF_RANDOMHARVEST + if (sc->sc_exec_units & TALITOS_HAS_EU_RNG) + talitos_rng_init(sc); +#endif + + /* Okay. Stand by. */ + spin_unlock_irqrestore(&sc->sc_chnfifolock[sc->sc_num_channels], flags); + + return; +} + +/* go through all channels descriptors, notifying OCF what's been done */ +static void talitos_doneprocessing(struct talitos_softc *sc) +{ + unsigned long flags; + int i, j; + + /* go through descriptors looking for done bits */ + for (i = 0; i < sc->sc_num_channels; i++) { + spin_lock_irqsave(&sc->sc_chnfifolock[i], flags); + for (j = 0; j < sc->sc_chfifo_len; j++) { + /* descriptor has done bits set? */ + if ((sc->sc_chnfifo[i][j].cf_desc.hdr + & TALITOS_HDR_DONE_BITS) + == TALITOS_HDR_DONE_BITS) { + /* notify ocf */ + crypto_done(sc->sc_chnfifo[i][j].cf_crp); + /* and tag it available again + * + * memset to ensure correct descriptor formation by + * avoiding inadvertently setting "optional" entries + * e.g. not using "optional" dptr2 MD/HMAC processing + */ + memset(&sc->sc_chnfifo[i][j].cf_desc, + 0, sizeof(struct talitos_desc)); + } + } + spin_unlock_irqrestore(&sc->sc_chnfifolock[i], flags); + } + return; +} + +static irqreturn_t +#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,19) +talitos_intr(int irq, void *arg) +#else +talitos_intr(int irq, void *arg, struct pt_regs *regs) +#endif +{ + struct talitos_softc *sc = arg; + u_int32_t v, v_hi; + + /* ack */ + v = talitos_read(sc->sc_base_addr + TALITOS_ISR); + v_hi = talitos_read(sc->sc_base_addr + TALITOS_ISR_HI); + talitos_write(sc->sc_base_addr + TALITOS_ICR, v); + talitos_write(sc->sc_base_addr + TALITOS_ICR_HI, v_hi); + + if (unlikely(v & TALITOS_ISR_ERROR)) { + /* Okay, Houston, we've had a problem here. */ + printk(KERN_DEBUG "%s: got error interrupt - ISR 0x%08x_%08x\n", + device_get_nameunit(sc->sc_cdev), v, v_hi); + talitos_errorprocessing(sc); + } else + if (likely(v & TALITOS_ISR_DONE)) { + talitos_doneprocessing(sc); + } + return IRQ_HANDLED; +} + +/* + * Initialize registers we need to touch only once. + */ +static void +talitos_init_device(struct talitos_softc *sc) +{ + u_int32_t v; + int i; + + DPRINTF("%s()\n", __FUNCTION__); + + /* init all channels */ + for (i = 0; i < sc->sc_num_channels; i++) { + v = talitos_read(sc->sc_base_addr + + i*TALITOS_CH_OFFSET + TALITOS_CH_CCCR_HI); + v |= TALITOS_CH_CCCR_HI_CDWE + | TALITOS_CH_CCCR_HI_CDIE; /* invoke interrupt if done */ + talitos_write(sc->sc_base_addr + + i*TALITOS_CH_OFFSET + TALITOS_CH_CCCR_HI, v); + } + /* enable all interrupts */ + v = talitos_read(sc->sc_base_addr + TALITOS_IMR); + v |= TALITOS_IMR_ALL; + talitos_write(sc->sc_base_addr + TALITOS_IMR, v); + v = talitos_read(sc->sc_base_addr + TALITOS_IMR_HI); + v |= TALITOS_IMR_HI_ERRONLY; + talitos_write(sc->sc_base_addr + TALITOS_IMR_HI, v); + return; +} + +/* + * set the master reset bit on the device. + */ +static void +talitos_reset_device_master(struct talitos_softc *sc) +{ + u_int32_t v; + + /* Reset the device by writing 1 to MCR:SWR and waiting 'til cleared */ + v = talitos_read(sc->sc_base_addr + TALITOS_MCR); + talitos_write(sc->sc_base_addr + TALITOS_MCR, v | TALITOS_MCR_SWR); + + while (talitos_read(sc->sc_base_addr + TALITOS_MCR) & TALITOS_MCR_SWR) + cpu_relax(); + + return; +} + +/* + * Resets the device. Values in the registers are left as is + * from the reset (i.e. initial values are assigned elsewhere). + */ +static void +talitos_reset_device(struct talitos_softc *sc) +{ + u_int32_t v; + int i; + + DPRINTF("%s()\n", __FUNCTION__); + + /* + * Master reset + * errata documentation: warning: certain SEC interrupts + * are not fully cleared by writing the MCR:SWR bit, + * set bit twice to completely reset + */ + talitos_reset_device_master(sc); /* once */ + talitos_reset_device_master(sc); /* and once again */ + + /* reset all channels */ + for (i = 0; i < sc->sc_num_channels; i++) { + v = talitos_read(sc->sc_base_addr + i*TALITOS_CH_OFFSET + + TALITOS_CH_CCCR); + talitos_write(sc->sc_base_addr + i*TALITOS_CH_OFFSET + + TALITOS_CH_CCCR, v | TALITOS_CH_CCCR_RESET); + } +} + +/* Set up the crypto device structure, private data, + * and anything else we need before we start */ +#ifdef CONFIG_PPC_MERGE +static int talitos_probe(struct of_device *ofdev, const struct of_device_id *match) +#else +static int talitos_probe(struct platform_device *pdev) +#endif +{ + struct talitos_softc *sc = NULL; + struct resource *r; +#ifdef CONFIG_PPC_MERGE + struct device *device = &ofdev->dev; + struct device_node *np = ofdev->node; + const unsigned int *prop; + int err; + struct resource res; +#endif + static int num_chips = 0; + int rc; + int i; + + DPRINTF("%s()\n", __FUNCTION__); + + sc = (struct talitos_softc *) kmalloc(sizeof(*sc), GFP_KERNEL); + if (!sc) + return -ENOMEM; + memset(sc, 0, sizeof(*sc)); + + softc_device_init(sc, DRV_NAME, num_chips, talitos_methods); + + sc->sc_irq = -1; + sc->sc_cid = -1; +#ifndef CONFIG_PPC_MERGE + sc->sc_dev = pdev; +#endif + sc->sc_num = num_chips++; + +#ifdef CONFIG_PPC_MERGE + dev_set_drvdata(device, sc); +#else + platform_set_drvdata(sc->sc_dev, sc); +#endif + + /* get the irq line */ +#ifdef CONFIG_PPC_MERGE + err = of_address_to_resource(np, 0, &res); + if (err) + return -EINVAL; + r = &res; + + sc->sc_irq = irq_of_parse_and_map(np, 0); +#else + /* get a pointer to the register memory */ + r = platform_get_resource(pdev, IORESOURCE_MEM, 0); + + sc->sc_irq = platform_get_irq(pdev, 0); +#endif + rc = request_irq(sc->sc_irq, talitos_intr, 0, + device_get_nameunit(sc->sc_cdev), sc); + if (rc) { + printk(KERN_ERR "%s: failed to hook irq %d\n", + device_get_nameunit(sc->sc_cdev), sc->sc_irq); + sc->sc_irq = -1; + goto out; + } + + sc->sc_base_addr = (ocf_iomem_t) ioremap(r->start, (r->end - r->start)); + if (!sc->sc_base_addr) { + printk(KERN_ERR "%s: failed to ioremap\n", + device_get_nameunit(sc->sc_cdev)); + goto out; + } + + /* figure out our SEC's properties and capabilities */ + sc->sc_chiprev = (u64)talitos_read(sc->sc_base_addr + TALITOS_ID) << 32 + | talitos_read(sc->sc_base_addr + TALITOS_ID_HI); + DPRINTF("sec id 0x%llx\n", sc->sc_chiprev); + +#ifdef CONFIG_PPC_MERGE + /* get SEC properties from device tree, defaulting to SEC 2.0 */ + + prop = of_get_property(np, "num-channels", NULL); + sc->sc_num_channels = prop ? *prop : TALITOS_NCHANNELS_SEC_2_0; + + prop = of_get_property(np, "channel-fifo-len", NULL); + sc->sc_chfifo_len = prop ? *prop : TALITOS_CHFIFOLEN_SEC_2_0; + + prop = of_get_property(np, "exec-units-mask", NULL); + sc->sc_exec_units = prop ? *prop : TALITOS_HAS_EUS_SEC_2_0; + + prop = of_get_property(np, "descriptor-types-mask", NULL); + sc->sc_desc_types = prop ? *prop : TALITOS_HAS_DESCTYPES_SEC_2_0; +#else + /* bulk should go away with openfirmware flat device tree support */ + if (sc->sc_chiprev & TALITOS_ID_SEC_2_0) { + sc->sc_num_channels = TALITOS_NCHANNELS_SEC_2_0; + sc->sc_chfifo_len = TALITOS_CHFIFOLEN_SEC_2_0; + sc->sc_exec_units = TALITOS_HAS_EUS_SEC_2_0; + sc->sc_desc_types = TALITOS_HAS_DESCTYPES_SEC_2_0; + } else { + printk(KERN_ERR "%s: failed to id device\n", + device_get_nameunit(sc->sc_cdev)); + goto out; + } +#endif + + /* + 1 is for the meta-channel lock used by the channel scheduler */ + sc->sc_chnfifolock = (spinlock_t *) kmalloc( + (sc->sc_num_channels + 1) * sizeof(spinlock_t), GFP_KERNEL); + if (!sc->sc_chnfifolock) + goto out; + for (i = 0; i < sc->sc_num_channels + 1; i++) { + spin_lock_init(&sc->sc_chnfifolock[i]); + } + + sc->sc_chnlastalg = (int *) kmalloc( + sc->sc_num_channels * sizeof(int), GFP_KERNEL); + if (!sc->sc_chnlastalg) + goto out; + memset(sc->sc_chnlastalg, 0, sc->sc_num_channels * sizeof(int)); + + sc->sc_chnfifo = (struct desc_cryptop_pair **) kmalloc( + sc->sc_num_channels * sizeof(struct desc_cryptop_pair *), + GFP_KERNEL); + if (!sc->sc_chnfifo) + goto out; + for (i = 0; i < sc->sc_num_channels; i++) { + sc->sc_chnfifo[i] = (struct desc_cryptop_pair *) kmalloc( + sc->sc_chfifo_len * sizeof(struct desc_cryptop_pair), + GFP_KERNEL); + if (!sc->sc_chnfifo[i]) + goto out; + memset(sc->sc_chnfifo[i], 0, + sc->sc_chfifo_len * sizeof(struct desc_cryptop_pair)); + } + + /* reset and initialize the SEC h/w device */ + talitos_reset_device(sc); + talitos_init_device(sc); + + sc->sc_cid = crypto_get_driverid(softc_get_device(sc),CRYPTOCAP_F_HARDWARE); + if (sc->sc_cid < 0) { + printk(KERN_ERR "%s: could not get crypto driver id\n", + device_get_nameunit(sc->sc_cdev)); + goto out; + } + + /* register algorithms with the framework */ + printk("%s:", device_get_nameunit(sc->sc_cdev)); + + if (sc->sc_exec_units & TALITOS_HAS_EU_RNG) { + printk(" rng"); +#ifdef CONFIG_OCF_RANDOMHARVEST + talitos_rng_init(sc); + crypto_rregister(sc->sc_cid, talitos_read_random, sc); +#endif + } + if (sc->sc_exec_units & TALITOS_HAS_EU_DEU) { + printk(" des/3des"); + crypto_register(sc->sc_cid, CRYPTO_3DES_CBC, 0, 0); + crypto_register(sc->sc_cid, CRYPTO_DES_CBC, 0, 0); + } + if (sc->sc_exec_units & TALITOS_HAS_EU_AESU) { + printk(" aes"); + crypto_register(sc->sc_cid, CRYPTO_AES_CBC, 0, 0); + } + if (sc->sc_exec_units & TALITOS_HAS_EU_MDEU) { + printk(" md5"); + crypto_register(sc->sc_cid, CRYPTO_MD5, 0, 0); + /* HMAC support only with IPsec for now */ + crypto_register(sc->sc_cid, CRYPTO_MD5_HMAC, 0, 0); + printk(" sha1"); + crypto_register(sc->sc_cid, CRYPTO_SHA1, 0, 0); + /* HMAC support only with IPsec for now */ + crypto_register(sc->sc_cid, CRYPTO_SHA1_HMAC, 0, 0); + } + printk("\n"); + return 0; + +out: +#ifndef CONFIG_PPC_MERGE + talitos_remove(pdev); +#endif + return -ENOMEM; +} + +#ifdef CONFIG_PPC_MERGE +static int talitos_remove(struct of_device *ofdev) +#else +static int talitos_remove(struct platform_device *pdev) +#endif +{ +#ifdef CONFIG_PPC_MERGE + struct talitos_softc *sc = dev_get_drvdata(&ofdev->dev); +#else + struct talitos_softc *sc = platform_get_drvdata(pdev); +#endif + int i; + + DPRINTF("%s()\n", __FUNCTION__); + if (sc->sc_cid >= 0) + crypto_unregister_all(sc->sc_cid); + if (sc->sc_chnfifo) { + for (i = 0; i < sc->sc_num_channels; i++) + if (sc->sc_chnfifo[i]) + kfree(sc->sc_chnfifo[i]); + kfree(sc->sc_chnfifo); + } + if (sc->sc_chnlastalg) + kfree(sc->sc_chnlastalg); + if (sc->sc_chnfifolock) + kfree(sc->sc_chnfifolock); + if (sc->sc_irq != -1) + free_irq(sc->sc_irq, sc); + if (sc->sc_base_addr) + iounmap((void *) sc->sc_base_addr); + kfree(sc); + return 0; +} + +#ifdef CONFIG_PPC_MERGE +static struct of_device_id talitos_match[] = { + { + .type = "crypto", + .compatible = "talitos", + }, + {}, +}; + +MODULE_DEVICE_TABLE(of, talitos_match); + +static struct of_platform_driver talitos_driver = { + .name = DRV_NAME, + .match_table = talitos_match, + .probe = talitos_probe, + .remove = talitos_remove, +}; + +static int __init talitos_init(void) +{ + return of_register_platform_driver(&talitos_driver); +} + +static void __exit talitos_exit(void) +{ + of_unregister_platform_driver(&talitos_driver); +} +#else +/* Structure for a platform device driver */ +static struct platform_driver talitos_driver = { + .probe = talitos_probe, + .remove = talitos_remove, + .driver = { + .name = "fsl-sec2", + } +}; + +static int __init talitos_init(void) +{ + return platform_driver_register(&talitos_driver); +} + +static void __exit talitos_exit(void) +{ + platform_driver_unregister(&talitos_driver); +} +#endif + +module_init(talitos_init); +module_exit(talitos_exit); + +MODULE_LICENSE("Dual BSD/GPL"); +MODULE_AUTHOR("kim.phillips@freescale.com"); +MODULE_DESCRIPTION("OCF driver for Freescale SEC (talitos)"); diff --git a/target/linux/generic-2.4/files/crypto/ocf/talitos/talitos_dev.h b/target/linux/generic-2.4/files/crypto/ocf/talitos/talitos_dev.h new file mode 100644 index 0000000000..a8b04799fa --- /dev/null +++ b/target/linux/generic-2.4/files/crypto/ocf/talitos/talitos_dev.h @@ -0,0 +1,277 @@ +/* + * Freescale SEC (talitos) device dependent data structures + * + * Copyright (c) 2006 Freescale Semiconductor, Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. The name of the author may not be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR + * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES + * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. + * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + */ + +/* device ID register values */ +#define TALITOS_ID_SEC_2_0 0x40 +#define TALITOS_ID_SEC_2_1 0x40 /* cross ref with IP block revision reg */ + +/* + * following num_channels, channel-fifo-depth, exec-unit-mask, and + * descriptor-types-mask are for forward-compatibility with openfirmware + * flat device trees + */ + +/* + * num_channels : the number of channels available in each SEC version. + */ + +/* n.b. this driver requires these values be a power of 2 */ +#define TALITOS_NCHANNELS_SEC_1_0 4 +#define TALITOS_NCHANNELS_SEC_1_2 1 +#define TALITOS_NCHANNELS_SEC_2_0 4 +#define TALITOS_NCHANNELS_SEC_2_01 4 +#define TALITOS_NCHANNELS_SEC_2_1 4 +#define TALITOS_NCHANNELS_SEC_2_4 4 + +/* + * channel-fifo-depth : The number of descriptor + * pointers a channel fetch fifo can hold. + */ +#define TALITOS_CHFIFOLEN_SEC_1_0 1 +#define TALITOS_CHFIFOLEN_SEC_1_2 1 +#define TALITOS_CHFIFOLEN_SEC_2_0 24 +#define TALITOS_CHFIFOLEN_SEC_2_01 24 +#define TALITOS_CHFIFOLEN_SEC_2_1 24 +#define TALITOS_CHFIFOLEN_SEC_2_4 24 + +/* + * exec-unit-mask : The bitmask representing what Execution Units (EUs) + * are available. EU information should be encoded following the SEC's + * EU_SEL0 bitfield documentation, i.e. as follows: + * + * bit 31 = set if SEC permits no-EU selection (should be always set) + * bit 30 = set if SEC has the ARC4 EU (AFEU) + * bit 29 = set if SEC has the des/3des EU (DEU) + * bit 28 = set if SEC has the message digest EU (MDEU) + * bit 27 = set if SEC has the random number generator EU (RNG) + * bit 26 = set if SEC has the public key EU (PKEU) + * bit 25 = set if SEC has the aes EU (AESU) + * bit 24 = set if SEC has the Kasumi EU (KEU) + * + */ +#define TALITOS_HAS_EU_NONE (1<<0) +#define TALITOS_HAS_EU_AFEU (1<<1) +#define TALITOS_HAS_EU_DEU (1<<2) +#define TALITOS_HAS_EU_MDEU (1<<3) +#define TALITOS_HAS_EU_RNG (1<<4) +#define TALITOS_HAS_EU_PKEU (1<<5) +#define TALITOS_HAS_EU_AESU (1<<6) +#define TALITOS_HAS_EU_KEU (1<<7) + +/* the corresponding masks for each SEC version */ +#define TALITOS_HAS_EUS_SEC_1_0 0x7f +#define TALITOS_HAS_EUS_SEC_1_2 0x4d +#define TALITOS_HAS_EUS_SEC_2_0 0x7f +#define TALITOS_HAS_EUS_SEC_2_01 0x7f +#define TALITOS_HAS_EUS_SEC_2_1 0xff +#define TALITOS_HAS_EUS_SEC_2_4 0x7f + +/* + * descriptor-types-mask : The bitmask representing what descriptors + * are available. Descriptor type information should be encoded + * following the SEC's Descriptor Header Dword DESC_TYPE field + * documentation, i.e. as follows: + * + * bit 0 = set if SEC supports the aesu_ctr_nonsnoop desc. type + * bit 1 = set if SEC supports the ipsec_esp descriptor type + * bit 2 = set if SEC supports the common_nonsnoop desc. type + * bit 3 = set if SEC supports the 802.11i AES ccmp desc. type + * bit 4 = set if SEC supports the hmac_snoop_no_afeu desc. type + * bit 5 = set if SEC supports the srtp descriptor type + * bit 6 = set if SEC supports the non_hmac_snoop_no_afeu desc.type + * bit 7 = set if SEC supports the pkeu_assemble descriptor type + * bit 8 = set if SEC supports the aesu_key_expand_output desc.type + * bit 9 = set if SEC supports the pkeu_ptmul descriptor type + * bit 10 = set if SEC supports the common_nonsnoop_afeu desc. type + * bit 11 = set if SEC supports the pkeu_ptadd_dbl descriptor type + * + * ..and so on and so forth. + */ +#define TALITOS_HAS_DT_AESU_CTR_NONSNOOP (1<<0) +#define TALITOS_HAS_DT_IPSEC_ESP (1<<1) +#define TALITOS_HAS_DT_COMMON_NONSNOOP (1<<2) + +/* the corresponding masks for each SEC version */ +#define TALITOS_HAS_DESCTYPES_SEC_2_0 0x01010ebf +#define TALITOS_HAS_DESCTYPES_SEC_2_1 0x012b0ebf + +/* + * a TALITOS_xxx_HI address points to the low data bits (32-63) of the register + */ + +/* global register offset addresses */ +#define TALITOS_ID 0x1020 +#define TALITOS_ID_HI 0x1024 +#define TALITOS_MCR 0x1030 /* master control register */ +#define TALITOS_MCR_HI 0x1038 /* master control register */ +#define TALITOS_MCR_SWR 0x1 +#define TALITOS_IMR 0x1008 /* interrupt mask register */ +#define TALITOS_IMR_ALL 0x00010fff /* enable all interrupts mask */ +#define TALITOS_IMR_ERRONLY 0x00010aaa /* enable error interrupts */ +#define TALITOS_IMR_HI 0x100C /* interrupt mask register */ +#define TALITOS_IMR_HI_ALL 0x00323333 /* enable all interrupts mask */ +#define TALITOS_IMR_HI_ERRONLY 0x00222222 /* enable error interrupts */ +#define TALITOS_ISR 0x1010 /* interrupt status register */ +#define TALITOS_ISR_ERROR 0x00010faa /* errors mask */ +#define TALITOS_ISR_DONE 0x00000055 /* channel(s) done mask */ +#define TALITOS_ISR_HI 0x1014 /* interrupt status register */ +#define TALITOS_ICR 0x1018 /* interrupt clear register */ +#define TALITOS_ICR_HI 0x101C /* interrupt clear register */ + +/* channel register address stride */ +#define TALITOS_CH_OFFSET 0x100 + +/* channel register offset addresses and bits */ +#define TALITOS_CH_CCCR 0x1108 /* Crypto-Channel Config Register */ +#define TALITOS_CH_CCCR_RESET 0x1 /* Channel Reset bit */ +#define TALITOS_CH_CCCR_HI 0x110c /* Crypto-Channel Config Register */ +#define TALITOS_CH_CCCR_HI_CDWE 0x10 /* Channel done writeback enable bit */ +#define TALITOS_CH_CCCR_HI_NT 0x4 /* Notification type bit */ +#define TALITOS_CH_CCCR_HI_CDIE 0x2 /* Channel Done Interrupt Enable bit */ +#define TALITOS_CH_CCPSR 0x1110 /* Crypto-Channel Pointer Status Reg */ +#define TALITOS_CH_CCPSR_HI 0x1114 /* Crypto-Channel Pointer Status Reg */ +#define TALITOS_CH_FF 0x1148 /* Fetch FIFO */ +#define TALITOS_CH_FF_HI 0x114c /* Fetch FIFO's FETCH_ADRS */ +#define TALITOS_CH_CDPR 0x1140 /* Crypto-Channel Pointer Status Reg */ +#define TALITOS_CH_CDPR_HI 0x1144 /* Crypto-Channel Pointer Status Reg */ +#define TALITOS_CH_DESCBUF 0x1180 /* (thru 11bf) Crypto-Channel + * Descriptor Buffer (debug) */ + +/* execution unit register offset addresses and bits */ +#define TALITOS_DEUSR 0x2028 /* DEU status register */ +#define TALITOS_DEUSR_HI 0x202c /* DEU status register */ +#define TALITOS_DEUISR 0x2030 /* DEU interrupt status register */ +#define TALITOS_DEUISR_HI 0x2034 /* DEU interrupt status register */ +#define TALITOS_DEUICR 0x2038 /* DEU interrupt control register */ +#define TALITOS_DEUICR_HI 0x203c /* DEU interrupt control register */ +#define TALITOS_AESUISR 0x4030 /* AESU interrupt status register */ +#define TALITOS_AESUISR_HI 0x4034 /* AESU interrupt status register */ +#define TALITOS_AESUICR 0x4038 /* AESU interrupt control register */ +#define TALITOS_AESUICR_HI 0x403c /* AESU interrupt control register */ +#define TALITOS_MDEUISR 0x6030 /* MDEU interrupt status register */ +#define TALITOS_MDEUISR_HI 0x6034 /* MDEU interrupt status register */ +#define TALITOS_RNGSR 0xa028 /* RNG status register */ +#define TALITOS_RNGSR_HI 0xa02c /* RNG status register */ +#define TALITOS_RNGSR_HI_RD 0x1 /* RNG Reset done */ +#define TALITOS_RNGSR_HI_OFL 0xff0000/* number of dwords in RNG output FIFO*/ +#define TALITOS_RNGDSR 0xa010 /* RNG data size register */ +#define TALITOS_RNGDSR_HI 0xa014 /* RNG data size register */ +#define TALITOS_RNG_FIFO 0xa800 /* RNG FIFO - pool of random numbers */ +#define TALITOS_RNGISR 0xa030 /* RNG Interrupt status register */ +#define TALITOS_RNGISR_HI 0xa034 /* RNG Interrupt status register */ +#define TALITOS_RNGRCR 0xa018 /* RNG Reset control register */ +#define TALITOS_RNGRCR_HI 0xa01c /* RNG Reset control register */ +#define TALITOS_RNGRCR_HI_SR 0x1 /* RNG RNGRCR:Software Reset */ + +/* descriptor pointer entry */ +struct talitos_desc_ptr { + u16 len; /* length */ + u8 extent; /* jump (to s/g link table) and extent */ + u8 res; /* reserved */ + u32 ptr; /* pointer */ +}; + +/* descriptor */ +struct talitos_desc { + u32 hdr; /* header */ + u32 res; /* reserved */ + struct talitos_desc_ptr ptr[7]; /* ptr/len pair array */ +}; + +/* talitos descriptor header (hdr) bits */ + +/* primary execution unit select */ +#define TALITOS_SEL0_AFEU 0x10000000 +#define TALITOS_SEL0_DEU 0x20000000 +#define TALITOS_SEL0_MDEU 0x30000000 +#define TALITOS_SEL0_RNG 0x40000000 +#define TALITOS_SEL0_PKEU 0x50000000 +#define TALITOS_SEL0_AESU 0x60000000 + +/* primary execution unit mode (MODE0) and derivatives */ +#define TALITOS_MODE0_AESU_CBC 0x00200000 +#define TALITOS_MODE0_AESU_ENC 0x00100000 +#define TALITOS_MODE0_DEU_CBC 0x00400000 +#define TALITOS_MODE0_DEU_3DES 0x00200000 +#define TALITOS_MODE0_DEU_ENC 0x00100000 +#define TALITOS_MODE0_MDEU_INIT 0x01000000 /* init starting regs */ +#define TALITOS_MODE0_MDEU_HMAC 0x00800000 +#define TALITOS_MODE0_MDEU_PAD 0x00400000 /* PD */ +#define TALITOS_MODE0_MDEU_MD5 0x00200000 +#define TALITOS_MODE0_MDEU_SHA256 0x00100000 +#define TALITOS_MODE0_MDEU_SHA1 0x00000000 /* SHA-160 */ +#define TALITOS_MODE0_MDEU_MD5_HMAC \ + (TALITOS_MODE0_MDEU_MD5 | TALITOS_MODE0_MDEU_HMAC) +#define TALITOS_MODE0_MDEU_SHA256_HMAC \ + (TALITOS_MODE0_MDEU_SHA256 | TALITOS_MODE0_MDEU_HMAC) +#define TALITOS_MODE0_MDEU_SHA1_HMAC \ + (TALITOS_MODE0_MDEU_SHA1 | TALITOS_MODE0_MDEU_HMAC) + +/* secondary execution unit select (SEL1) */ +/* it's MDEU or nothing */ +#define TALITOS_SEL1_MDEU 0x00030000 + +/* secondary execution unit mode (MODE1) and derivatives */ +#define TALITOS_MODE1_MDEU_INIT 0x00001000 /* init starting regs */ +#define TALITOS_MODE1_MDEU_HMAC 0x00000800 +#define TALITOS_MODE1_MDEU_PAD 0x00000400 /* PD */ +#define TALITOS_MODE1_MDEU_MD5 0x00000200 +#define TALITOS_MODE1_MDEU_SHA256 0x00000100 +#define TALITOS_MODE1_MDEU_SHA1 0x00000000 /* SHA-160 */ +#define TALITOS_MODE1_MDEU_MD5_HMAC \ + (TALITOS_MODE1_MDEU_MD5 | TALITOS_MODE1_MDEU_HMAC) +#define TALITOS_MODE1_MDEU_SHA256_HMAC \ + (TALITOS_MODE1_MDEU_SHA256 | TALITOS_MODE1_MDEU_HMAC) +#define TALITOS_MODE1_MDEU_SHA1_HMAC \ + (TALITOS_MODE1_MDEU_SHA1 | TALITOS_MODE1_MDEU_HMAC) + +/* direction of overall data flow (DIR) */ +#define TALITOS_DIR_OUTBOUND 0x00000000 +#define TALITOS_DIR_INBOUND 0x00000002 + +/* done notification (DN) */ +#define TALITOS_DONE_NOTIFY 0x00000001 + +/* descriptor types */ +/* odd numbers here are valid on SEC2 and greater only (e.g. ipsec_esp) */ +#define TD_TYPE_AESU_CTR_NONSNOOP (0 << 3) +#define TD_TYPE_IPSEC_ESP (1 << 3) +#define TD_TYPE_COMMON_NONSNOOP_NO_AFEU (2 << 3) +#define TD_TYPE_HMAC_SNOOP_NO_AFEU (4 << 3) + +#define TALITOS_HDR_DONE_BITS 0xff000000 + +#define DPRINTF(a...) do { \ + if (debug) { \ + printk("%s: ", sc ? \ + device_get_nameunit(sc->sc_cdev) : "talitos"); \ + printk(a); \ + } \ + } while (0) diff --git a/target/linux/generic-2.4/files/crypto/ocf/talitos/talitos_soft.h b/target/linux/generic-2.4/files/crypto/ocf/talitos/talitos_soft.h new file mode 100644 index 0000000000..79efdbd314 --- /dev/null +++ b/target/linux/generic-2.4/files/crypto/ocf/talitos/talitos_soft.h @@ -0,0 +1,77 @@ +/* + * Freescale SEC data structures for integration with ocf-linux + * + * Copyright (c) 2006 Freescale Semiconductor, Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. The name of the author may not be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR + * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES + * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. + * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/* + * paired descriptor and associated crypto operation + */ +struct desc_cryptop_pair { + struct talitos_desc cf_desc; /* descriptor ptr */ + struct cryptop *cf_crp; /* cryptop ptr */ +}; + +/* + * Holds data specific to a single talitos device. + */ +struct talitos_softc { + softc_device_decl sc_cdev; + struct platform_device *sc_dev; /* device backpointer */ + ocf_iomem_t sc_base_addr; + int sc_irq; + int sc_num; /* if we have multiple chips */ + int32_t sc_cid; /* crypto tag */ + u64 sc_chiprev; /* major/minor chip revision */ + int sc_nsessions; + struct talitos_session *sc_sessions; + int sc_num_channels;/* number of crypto channels */ + int sc_chfifo_len; /* channel fetch fifo len */ + int sc_exec_units; /* execution units mask */ + int sc_desc_types; /* descriptor types mask */ + /* + * mutual exclusion for intra-channel resources, e.g. fetch fifos + * the last entry is a meta-channel lock used by the channel scheduler + */ + spinlock_t *sc_chnfifolock; + /* sc_chnlastalgo contains last algorithm for that channel */ + int *sc_chnlastalg; + /* sc_chnfifo holds pending descriptor--crypto operation pairs */ + struct desc_cryptop_pair **sc_chnfifo; +}; + +struct talitos_session { + u_int32_t ses_used; + u_int32_t ses_klen; /* key length in bits */ + u_int32_t ses_key[8]; /* DES/3DES/AES key */ + u_int32_t ses_hmac[5]; /* hmac inner state */ + u_int32_t ses_hmac_len; /* hmac length */ + u_int32_t ses_iv[4]; /* DES/3DES/AES iv */ + u_int32_t ses_mlen; /* desired hash result len (12=ipsec or 16) */ +}; + +#define TALITOS_SESSION(sid) ((sid) & 0x0fffffff) +#define TALITOS_SID(crd, sesn) (((crd) << 28) | ((sesn) & 0x0fffffff)) diff --git a/target/linux/generic-2.4/files/crypto/ocf/uio.h b/target/linux/generic-2.4/files/crypto/ocf/uio.h new file mode 100644 index 0000000000..03a62491fa --- /dev/null +++ b/target/linux/generic-2.4/files/crypto/ocf/uio.h @@ -0,0 +1,54 @@ +#ifndef _OCF_UIO_H_ +#define _OCF_UIO_H_ + +#include + +/* + * The linux uio.h doesn't have all we need. To be fully api compatible + * with the BSD cryptodev, we need to keep this around. Perhaps this can + * be moved back into the linux/uio.h + * + * Linux port done by David McCullough + * Copyright (C) 2006-2010 David McCullough + * Copyright (C) 2004-2005 Intel Corporation. + * + * LICENSE TERMS + * + * The free distribution and use of this software in both source and binary + * form is allowed (with or without changes) provided that: + * + * 1. distributions of this source code include the above copyright + * notice, this list of conditions and the following disclaimer; + * + * 2. distributions in binary form include the above copyright + * notice, this list of conditions and the following disclaimer + * in the documentation and/or other associated materials; + * + * 3. the copyright holder's name is not used to endorse products + * built using this software without specific written permission. + * + * ALTERNATIVELY, provided that this notice is retained in full, this product + * may be distributed under the terms of the GNU General Public License (GPL), + * in which case the provisions of the GPL apply INSTEAD OF those given above. + * + * DISCLAIMER + * + * This software is provided 'as is' with no explicit or implied warranties + * in respect of its properties, including, but not limited to, correctness + * and/or fitness for purpose. + * --------------------------------------------------------------------------- + */ + +struct uio { + struct iovec *uio_iov; + int uio_iovcnt; + off_t uio_offset; + int uio_resid; +#if 0 + enum uio_seg uio_segflg; + enum uio_rw uio_rw; + struct thread *uio_td; +#endif +}; + +#endif diff --git a/target/linux/generic-2.4/patches/629-netlink_types_h.patch b/target/linux/generic-2.4/patches/629-netlink_types_h.patch index 9c5b45df61..49803b76f9 100644 --- a/target/linux/generic-2.4/patches/629-netlink_types_h.patch +++ b/target/linux/generic-2.4/patches/629-netlink_types_h.patch @@ -9,8 +9,8 @@ #define NETLINK_ROUTE 0 /* Routing/device hook */ #define NETLINK_SKIP 1 /* Reserved for ENskip */ #define NETLINK_USERSOCK 2 /* Reserved for user mode socket protocols */ ---- a/include/linux/filter.h 2010-02-01 22:04:46.000000000 +0100 -+++ b/include/linux/filter.h 2010-03-29 20:57:08.000000000 +0200 +--- a/include/linux/filter.h ++++ b/include/linux/filter.h @@ -5,6 +5,8 @@ #ifndef __LINUX_FILTER_H__ #define __LINUX_FILTER_H__ diff --git a/target/linux/generic-2.4/patches/900-ocf-kconfig-integration.patch b/target/linux/generic-2.4/patches/900-ocf-kconfig-integration.patch new file mode 100644 index 0000000000..e176bf5366 --- /dev/null +++ b/target/linux/generic-2.4/patches/900-ocf-kconfig-integration.patch @@ -0,0 +1,21 @@ +--- a/crypto/Config.in ++++ b/crypto/Config.in +@@ -117,4 +117,6 @@ if [ "$CONFIG_CRYPTO" = "y" ]; then + tristate ' Testing module' CONFIG_CRYPTO_TEST + fi + ++source crypto/ocf/Config.in ++ + endmenu +--- a/crypto/Makefile ++++ b/crypto/Makefile +@@ -36,4 +36,9 @@ obj-$(CONFIG_CRYPTO_MICHAEL_MIC) += mich + + obj-$(CONFIG_CRYPTO_TEST) += tcrypt.o + ++mod-subdirs += ocf ++subdir-$(CONFIG_OCF_OCF) += ocf ++ocf-$(CONFIG_OCF_OCF) = ocf/ocfdrv.o ++obj-$(CONFIG_OCF_OCF) += $(ocf-y) ++ + include $(TOPDIR)/Rules.make diff --git a/target/linux/generic-2.4/patches/901-ocf-20100325.patch b/target/linux/generic-2.4/patches/901-ocf-20100325.patch new file mode 100644 index 0000000000..6d0f522f74 --- /dev/null +++ b/target/linux/generic-2.4/patches/901-ocf-20100325.patch @@ -0,0 +1,120 @@ +--- a/drivers/char/random.c ++++ b/drivers/char/random.c +@@ -901,6 +901,65 @@ void add_blkdev_randomness(int major) + #define subRound(a, b, c, d, e, f, k, data) \ + ( e += ROTL( 5, a ) + f( b, c, d ) + k + data, b = ROTL( 30, b ) ) + ++/* ++ * random_input_words - add bulk entropy to pool ++ * ++ * @buf: buffer to add ++ * @wordcount: number of __u32 words to add ++ * @ent_count: total amount of entropy (in bits) to credit ++ * ++ * this provides bulk input of entropy to the input pool ++ * ++ */ ++void random_input_words(__u32 *buf, size_t wordcount, int ent_count) ++{ ++ if (!random_state) ++ return; ++ add_entropy_words(random_state, buf, wordcount); ++ ++ credit_entropy_store(random_state, ent_count); ++ ++ DEBUG_ENT("credited %d bits => %d\n", ++ ent_count, random_state->entropy_count); ++ /* ++ * Wake up waiting processes if we have enough ++ * entropy. ++ */ ++ if (random_state->entropy_count >= random_read_wakeup_thresh) ++ wake_up_interruptible(&random_read_wait); ++} ++EXPORT_SYMBOL(random_input_words); ++ ++/* ++ * random_input_wait - wait until random needs entropy ++ * ++ * this function sleeps until the /dev/random subsystem actually ++ * needs more entropy, and then return the amount of entropy ++ * that it would be nice to have added to the system. ++ */ ++int random_input_wait(void) ++{ ++ int count; ++ ++ if (!random_state) ++ return -1; ++ ++ wait_event_interruptible(random_write_wait, ++ random_state->entropy_count < random_write_wakeup_thresh); ++ ++ count = random_write_wakeup_thresh - random_state->entropy_count; ++ ++ /* likely we got woken up due to a signal */ ++ if (count <= 0) count = random_read_wakeup_thresh; ++ ++ DEBUG_ENT("requesting %d bits from input_wait()er %d<%d\n", ++ count, ++ random_state->entropy_count, random_write_wakeup_thresh); ++ ++ return count; ++} ++EXPORT_SYMBOL(random_input_wait); ++ + + static void SHATransform(__u32 digest[85], __u32 const data[16]) + { +--- a/fs/Makefile ++++ b/fs/Makefile +@@ -10,6 +10,8 @@ O_TARGET := fs.o + export-objs := filesystems.o open.o dcache.o buffer.o dquot.o + mod-subdirs := nls + ++export-objs += fcntl.o ++ + obj-y := open.o read_write.o devices.o file_table.o buffer.o \ + super.o block_dev.o char_dev.o stat.o exec.o pipe.o namei.o \ + fcntl.o ioctl.o readdir.o select.o fifo.o locks.o \ +--- a/fs/fcntl.c ++++ b/fs/fcntl.c +@@ -12,6 +12,7 @@ + #include + #include + #include ++#include + + #include + #include +@@ -199,6 +200,7 @@ asmlinkage long sys_dup(unsigned int fil + ret = dupfd(file, 0); + return ret; + } ++EXPORT_SYMBOL(sys_dup); + + #define SETFL_MASK (O_APPEND | O_NONBLOCK | O_NDELAY | FASYNC | O_DIRECT) + +--- a/include/linux/miscdevice.h ++++ b/include/linux/miscdevice.h +@@ -15,6 +15,7 @@ + #define ADB_MOUSE_MINOR 10 + #define MK712_MINOR 15 /* MK712 touch screen */ + #define SYNTH_MINOR 25 ++#define CRYPTODEV_MINOR 70 /* OpenBSD cryptographic framework */ + #define WATCHDOG_MINOR 130 /* Watchdog timer */ + #define TEMP_MINOR 131 /* Temperature Sensor */ + #define RTC_MINOR 135 +--- a/include/linux/random.h ++++ b/include/linux/random.h +@@ -53,6 +53,10 @@ extern void add_mouse_randomness(__u32 m + extern void add_interrupt_randomness(int irq); + extern void add_blkdev_randomness(int major); + ++extern void random_input_words(__u32 *buf, size_t wordcount, int ent_count); ++extern int random_input_wait(void); ++#define HAS_RANDOM_INPUT_WAIT 1 ++ + extern void get_random_bytes(void *buf, int nbytes); + void generate_random_uuid(unsigned char uuid_out[16]); +