From: John Crispin Date: Tue, 21 Apr 2015 07:15:37 +0000 (+0000) Subject: ipq806x: add db149 dts files X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=0fd202f3e563573519154f733e3fc411165d4761;p=openwrt%2Fstaging%2Fzorun.git ipq806x: add db149 dts files DB149 is an IPQ806x based development platform. This patch adds the dts files to support it. Signed-off-by: Mathieu Olivari SVN-Revision: 45536 --- diff --git a/target/linux/ipq806x/patches-3.18/022-add-db149-dts.patch b/target/linux/ipq806x/patches-3.18/022-add-db149-dts.patch new file mode 100644 index 0000000000..9a036fb451 --- /dev/null +++ b/target/linux/ipq806x/patches-3.18/022-add-db149-dts.patch @@ -0,0 +1,293 @@ +From a32d6e7c8fca6371a2614924b89981bc912b6378 Mon Sep 17 00:00:00 2001 +From: Mathieu Olivari +Date: Tue, 7 Apr 2015 19:58:58 -0700 +Subject: [PATCH] ARM: dts: qcom: add initial DB149 device-tree + +Add basic DB149 (IPQ806x based platform) device-tree. It supports UART, +SATA, USB2, USB3 and NOR flash. + +Signed-off-by: Mathieu Olivari +--- + arch/arm/boot/dts/Makefile | 1 + + arch/arm/boot/dts/qcom-ipq8064-db149.dts | 257 +++++++++++++++++++++++++++++++ + 2 files changed, 258 insertions(+) + create mode 100644 arch/arm/boot/dts/qcom-ipq8064-db149.dts + +diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile +index 38c89ca..745360a 100644 +--- a/arch/arm/boot/dts/Makefile ++++ b/arch/arm/boot/dts/Makefile +@@ -360,6 +360,7 @@ dtb-$(CONFIG_ARCH_QCOM) += \ + qcom-apq8084-ifc6540.dtb \ + qcom-apq8084-mtp.dtb \ + qcom-ipq8064-ap148.dtb \ ++ qcom-ipq8064-db149.dtb \ + qcom-msm8660-surf.dtb \ + qcom-msm8960-cdp.dtb \ + qcom-msm8974-sony-xperia-honami.dtb +diff --git a/arch/arm/boot/dts/qcom-ipq8064-db149.dts b/arch/arm/boot/dts/qcom-ipq8064-db149.dts +new file mode 100644 +index 0000000..224c54f +--- /dev/null ++++ b/arch/arm/boot/dts/qcom-ipq8064-db149.dts +@@ -0,0 +1,257 @@ ++#include "qcom-ipq8064-v1.0.dtsi" ++ ++/ { ++ model = "Qualcomm IPQ8064/DB149"; ++ compatible = "qcom,ipq8064-db149", "qcom,ipq8064"; ++ ++ reserved-memory { ++ #address-cells = <1>; ++ #size-cells = <1>; ++ ranges; ++ rsvd@41200000 { ++ reg = <0x41200000 0x300000>; ++ no-map; ++ }; ++ }; ++ ++ alias { ++ serial0 = &uart2; ++ }; ++ ++ chosen { ++ linux,stdout-path = "serial0:115200n8"; ++ }; ++ ++ aliases { ++ mdio-gpio0 = &mdio0; ++ }; ++ ++ soc { ++ pinmux@800000 { ++ pinctrl-0 = <&mdio0_pins &rgmii0_pinmux>; ++ pinctrl-names = "default"; ++ ++ i2c4_pins: i2c4_pinmux { ++ pins = "gpio12", "gpio13"; ++ function = "gsbi4"; ++ bias-disable; ++ }; ++ ++ spi_pins: spi_pins { ++ mux { ++ pins = "gpio18", "gpio19", "gpio21"; ++ function = "gsbi5"; ++ drive-strength = <10>; ++ bias-none; ++ }; ++ }; ++ ++ mdio0_pins: mdio0_pins { ++ mux { ++ pins = "gpio0", "gpio1"; ++ function = "gpio"; ++ drive-strength = <8>; ++ bias-disable; ++ }; ++ }; ++ ++ rgmii0_pinmux: rgmii0_pinmux { ++ mux { ++ pins = "gpio2", "gpio66"; ++ drive-strength = <8>; ++ bias-disable; ++ }; ++ }; ++ }; ++ ++ gsbi2: gsbi@12480000 { ++ qcom,mode = ; ++ status = "ok"; ++ uart2: serial@12490000 { ++ status = "ok"; ++ }; ++ }; ++ ++ gsbi5: gsbi@1a200000 { ++ qcom,mode = ; ++ status = "ok"; ++ ++ spi4: spi@1a280000 { ++ status = "ok"; ++ spi-max-frequency = <50000000>; ++ ++ pinctrl-0 = <&spi_pins>; ++ pinctrl-names = "default"; ++ ++ cs-gpios = <&qcom_pinmux 20 0>; ++ ++ flash: m25p80@0 { ++ compatible = "s25fl256s1"; ++ #address-cells = <1>; ++ #size-cells = <1>; ++ spi-max-frequency = <50000000>; ++ reg = <0>; ++ m25p,fast-read; ++ ++ partition@0 { ++ label = "lowlevel_init"; ++ reg = <0x0 0x1b0000>; ++ }; ++ ++ partition@1 { ++ label = "u-boot"; ++ reg = <0x1b0000 0x80000>; ++ }; ++ ++ partition@2 { ++ label = "u-boot-env"; ++ reg = <0x230000 0x40000>; ++ }; ++ ++ partition@3 { ++ label = "caldata"; ++ reg = <0x270000 0x40000>; ++ }; ++ ++ partition@4 { ++ label = "firmware"; ++ reg = <0x2b0000 0x1d50000>; ++ }; ++ }; ++ }; ++ }; ++ ++ sata-phy@1b400000 { ++ status = "ok"; ++ }; ++ ++ sata@29000000 { ++ status = "ok"; ++ }; ++ ++ phy@100f8800 { /* USB3 port 1 HS phy */ ++ status = "ok"; ++ }; ++ ++ phy@100f8830 { /* USB3 port 1 SS phy */ ++ status = "ok"; ++ }; ++ ++ phy@110f8800 { /* USB3 port 0 HS phy */ ++ status = "ok"; ++ }; ++ ++ phy@110f8830 { /* USB3 port 0 SS phy */ ++ status = "ok"; ++ }; ++ ++ usb30@0 { ++ status = "ok"; ++ }; ++ ++ usb30@1 { ++ status = "ok"; ++ }; ++ ++ mdio0: mdio { ++ compatible = "virtual,mdio-gpio"; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ gpios = <&qcom_pinmux 1 0 &qcom_pinmux 0 0>; ++ ++ phy0: ethernet-phy@0 { ++ device_type = "ethernet-phy"; ++ reg = <0>; ++ qca,ar8327-initvals = < ++ 0x00004 0x7600000 /* PAD0_MODE */ ++ 0x00008 0x1000000 /* PAD5_MODE */ ++ 0x0000c 0x80 /* PAD6_MODE */ ++ 0x000e4 0xaa545 /* MAC_POWER_SEL */ ++ 0x000e0 0xc74164de /* SGMII_CTRL */ ++ 0x0007c 0x4e /* PORT0_STATUS */ ++ 0x00094 0x4e /* PORT6_STATUS */ ++ >; ++ }; ++ ++ phy4: ethernet-phy@4 { ++ device_type = "ethernet-phy"; ++ reg = <4>; ++ }; ++ ++ phy6: ethernet-phy@6 { ++ device_type = "ethernet-phy"; ++ reg = <6>; ++ }; ++ ++ phy7: ethernet-phy@7 { ++ device_type = "ethernet-phy"; ++ reg = <7>; ++ }; ++ }; ++ ++ nss-gmac-common { ++ reg = <0x03000000 0x0000FFFF 0x1bb00000 0x0000FFFF 0x00900000 0x00004000>; ++ reg-names = "nss_reg_base" , "qsgmii_reg_base", "clk_ctl_base"; ++ }; ++ ++ gmac0: ethernet@37000000 { ++ status = "ok"; ++ phy-mode = "rgmii"; ++ qcom,id = <0>; ++ qcom,phy_mdio_addr = <4>; ++ qcom,poll_required = <1>; ++ qcom,rgmii_delay = <1>; ++ qcom,emulation = <0>; ++ qcom,forced_speed = <1000>; ++ qcom,forced_duplex = <1>; ++ qcom,socver = <0>; ++ local-mac-address = [000000000000]; ++ mdiobus = <&mdio0>; ++ }; ++ ++ gmac1: ethernet@37200000 { ++ status = "ok"; ++ phy-mode = "sgmii"; ++ qcom,id = <1>; ++ qcom,phy_mdio_addr = <0>; ++ qcom,poll_required = <0>; ++ qcom,rgmii_delay = <0>; ++ qcom,emulation = <0>; ++ qcom,forced_speed = <1000>; ++ qcom,forced_duplex = <1>; ++ qcom,socver = <0>; ++ local-mac-address = [000000000000]; ++ mdiobus = <&mdio0>; ++ }; ++ ++ gmac2: ethernet@37400000 { ++ status = "ok"; ++ phy-mode = "sgmii"; ++ qcom,id = <2>; ++ qcom,phy_mdio_addr = <6>; ++ qcom,poll_required = <1>; ++ qcom,rgmii_delay = <0>; ++ qcom,emulation = <0>; ++ qcom,forced_speed = <0>; ++ qcom,forced_duplex = <0>; ++ qcom,socver = <0>; ++ local-mac-address = [000000000000]; ++ mdiobus = <&mdio0>; ++ }; ++ ++ gmac3: ethernet@37600000 { ++ status = "ok"; ++ phy-mode = "sgmii"; ++ qcom,id = <3>; ++ qcom,phy_mdio_addr = <7>; ++ qcom,poll_required = <1>; ++ qcom,rgmii_delay = <0>; ++ qcom,emulation = <0>; ++ qcom,forced_speed = <0>; ++ qcom,forced_duplex = <0>; ++ qcom,socver = <0>; ++ local-mac-address = [000000000000]; ++ mdiobus = <&mdio0>; ++ }; ++ }; ++}; +-- +1.9.1 + diff --git a/target/linux/ipq806x/patches-4.0/022-add-db149-dts.patch b/target/linux/ipq806x/patches-4.0/022-add-db149-dts.patch new file mode 100644 index 0000000000..9a036fb451 --- /dev/null +++ b/target/linux/ipq806x/patches-4.0/022-add-db149-dts.patch @@ -0,0 +1,293 @@ +From a32d6e7c8fca6371a2614924b89981bc912b6378 Mon Sep 17 00:00:00 2001 +From: Mathieu Olivari +Date: Tue, 7 Apr 2015 19:58:58 -0700 +Subject: [PATCH] ARM: dts: qcom: add initial DB149 device-tree + +Add basic DB149 (IPQ806x based platform) device-tree. It supports UART, +SATA, USB2, USB3 and NOR flash. + +Signed-off-by: Mathieu Olivari +--- + arch/arm/boot/dts/Makefile | 1 + + arch/arm/boot/dts/qcom-ipq8064-db149.dts | 257 +++++++++++++++++++++++++++++++ + 2 files changed, 258 insertions(+) + create mode 100644 arch/arm/boot/dts/qcom-ipq8064-db149.dts + +diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile +index 38c89ca..745360a 100644 +--- a/arch/arm/boot/dts/Makefile ++++ b/arch/arm/boot/dts/Makefile +@@ -360,6 +360,7 @@ dtb-$(CONFIG_ARCH_QCOM) += \ + qcom-apq8084-ifc6540.dtb \ + qcom-apq8084-mtp.dtb \ + qcom-ipq8064-ap148.dtb \ ++ qcom-ipq8064-db149.dtb \ + qcom-msm8660-surf.dtb \ + qcom-msm8960-cdp.dtb \ + qcom-msm8974-sony-xperia-honami.dtb +diff --git a/arch/arm/boot/dts/qcom-ipq8064-db149.dts b/arch/arm/boot/dts/qcom-ipq8064-db149.dts +new file mode 100644 +index 0000000..224c54f +--- /dev/null ++++ b/arch/arm/boot/dts/qcom-ipq8064-db149.dts +@@ -0,0 +1,257 @@ ++#include "qcom-ipq8064-v1.0.dtsi" ++ ++/ { ++ model = "Qualcomm IPQ8064/DB149"; ++ compatible = "qcom,ipq8064-db149", "qcom,ipq8064"; ++ ++ reserved-memory { ++ #address-cells = <1>; ++ #size-cells = <1>; ++ ranges; ++ rsvd@41200000 { ++ reg = <0x41200000 0x300000>; ++ no-map; ++ }; ++ }; ++ ++ alias { ++ serial0 = &uart2; ++ }; ++ ++ chosen { ++ linux,stdout-path = "serial0:115200n8"; ++ }; ++ ++ aliases { ++ mdio-gpio0 = &mdio0; ++ }; ++ ++ soc { ++ pinmux@800000 { ++ pinctrl-0 = <&mdio0_pins &rgmii0_pinmux>; ++ pinctrl-names = "default"; ++ ++ i2c4_pins: i2c4_pinmux { ++ pins = "gpio12", "gpio13"; ++ function = "gsbi4"; ++ bias-disable; ++ }; ++ ++ spi_pins: spi_pins { ++ mux { ++ pins = "gpio18", "gpio19", "gpio21"; ++ function = "gsbi5"; ++ drive-strength = <10>; ++ bias-none; ++ }; ++ }; ++ ++ mdio0_pins: mdio0_pins { ++ mux { ++ pins = "gpio0", "gpio1"; ++ function = "gpio"; ++ drive-strength = <8>; ++ bias-disable; ++ }; ++ }; ++ ++ rgmii0_pinmux: rgmii0_pinmux { ++ mux { ++ pins = "gpio2", "gpio66"; ++ drive-strength = <8>; ++ bias-disable; ++ }; ++ }; ++ }; ++ ++ gsbi2: gsbi@12480000 { ++ qcom,mode = ; ++ status = "ok"; ++ uart2: serial@12490000 { ++ status = "ok"; ++ }; ++ }; ++ ++ gsbi5: gsbi@1a200000 { ++ qcom,mode = ; ++ status = "ok"; ++ ++ spi4: spi@1a280000 { ++ status = "ok"; ++ spi-max-frequency = <50000000>; ++ ++ pinctrl-0 = <&spi_pins>; ++ pinctrl-names = "default"; ++ ++ cs-gpios = <&qcom_pinmux 20 0>; ++ ++ flash: m25p80@0 { ++ compatible = "s25fl256s1"; ++ #address-cells = <1>; ++ #size-cells = <1>; ++ spi-max-frequency = <50000000>; ++ reg = <0>; ++ m25p,fast-read; ++ ++ partition@0 { ++ label = "lowlevel_init"; ++ reg = <0x0 0x1b0000>; ++ }; ++ ++ partition@1 { ++ label = "u-boot"; ++ reg = <0x1b0000 0x80000>; ++ }; ++ ++ partition@2 { ++ label = "u-boot-env"; ++ reg = <0x230000 0x40000>; ++ }; ++ ++ partition@3 { ++ label = "caldata"; ++ reg = <0x270000 0x40000>; ++ }; ++ ++ partition@4 { ++ label = "firmware"; ++ reg = <0x2b0000 0x1d50000>; ++ }; ++ }; ++ }; ++ }; ++ ++ sata-phy@1b400000 { ++ status = "ok"; ++ }; ++ ++ sata@29000000 { ++ status = "ok"; ++ }; ++ ++ phy@100f8800 { /* USB3 port 1 HS phy */ ++ status = "ok"; ++ }; ++ ++ phy@100f8830 { /* USB3 port 1 SS phy */ ++ status = "ok"; ++ }; ++ ++ phy@110f8800 { /* USB3 port 0 HS phy */ ++ status = "ok"; ++ }; ++ ++ phy@110f8830 { /* USB3 port 0 SS phy */ ++ status = "ok"; ++ }; ++ ++ usb30@0 { ++ status = "ok"; ++ }; ++ ++ usb30@1 { ++ status = "ok"; ++ }; ++ ++ mdio0: mdio { ++ compatible = "virtual,mdio-gpio"; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ gpios = <&qcom_pinmux 1 0 &qcom_pinmux 0 0>; ++ ++ phy0: ethernet-phy@0 { ++ device_type = "ethernet-phy"; ++ reg = <0>; ++ qca,ar8327-initvals = < ++ 0x00004 0x7600000 /* PAD0_MODE */ ++ 0x00008 0x1000000 /* PAD5_MODE */ ++ 0x0000c 0x80 /* PAD6_MODE */ ++ 0x000e4 0xaa545 /* MAC_POWER_SEL */ ++ 0x000e0 0xc74164de /* SGMII_CTRL */ ++ 0x0007c 0x4e /* PORT0_STATUS */ ++ 0x00094 0x4e /* PORT6_STATUS */ ++ >; ++ }; ++ ++ phy4: ethernet-phy@4 { ++ device_type = "ethernet-phy"; ++ reg = <4>; ++ }; ++ ++ phy6: ethernet-phy@6 { ++ device_type = "ethernet-phy"; ++ reg = <6>; ++ }; ++ ++ phy7: ethernet-phy@7 { ++ device_type = "ethernet-phy"; ++ reg = <7>; ++ }; ++ }; ++ ++ nss-gmac-common { ++ reg = <0x03000000 0x0000FFFF 0x1bb00000 0x0000FFFF 0x00900000 0x00004000>; ++ reg-names = "nss_reg_base" , "qsgmii_reg_base", "clk_ctl_base"; ++ }; ++ ++ gmac0: ethernet@37000000 { ++ status = "ok"; ++ phy-mode = "rgmii"; ++ qcom,id = <0>; ++ qcom,phy_mdio_addr = <4>; ++ qcom,poll_required = <1>; ++ qcom,rgmii_delay = <1>; ++ qcom,emulation = <0>; ++ qcom,forced_speed = <1000>; ++ qcom,forced_duplex = <1>; ++ qcom,socver = <0>; ++ local-mac-address = [000000000000]; ++ mdiobus = <&mdio0>; ++ }; ++ ++ gmac1: ethernet@37200000 { ++ status = "ok"; ++ phy-mode = "sgmii"; ++ qcom,id = <1>; ++ qcom,phy_mdio_addr = <0>; ++ qcom,poll_required = <0>; ++ qcom,rgmii_delay = <0>; ++ qcom,emulation = <0>; ++ qcom,forced_speed = <1000>; ++ qcom,forced_duplex = <1>; ++ qcom,socver = <0>; ++ local-mac-address = [000000000000]; ++ mdiobus = <&mdio0>; ++ }; ++ ++ gmac2: ethernet@37400000 { ++ status = "ok"; ++ phy-mode = "sgmii"; ++ qcom,id = <2>; ++ qcom,phy_mdio_addr = <6>; ++ qcom,poll_required = <1>; ++ qcom,rgmii_delay = <0>; ++ qcom,emulation = <0>; ++ qcom,forced_speed = <0>; ++ qcom,forced_duplex = <0>; ++ qcom,socver = <0>; ++ local-mac-address = [000000000000]; ++ mdiobus = <&mdio0>; ++ }; ++ ++ gmac3: ethernet@37600000 { ++ status = "ok"; ++ phy-mode = "sgmii"; ++ qcom,id = <3>; ++ qcom,phy_mdio_addr = <7>; ++ qcom,poll_required = <1>; ++ qcom,rgmii_delay = <0>; ++ qcom,emulation = <0>; ++ qcom,forced_speed = <0>; ++ qcom,forced_duplex = <0>; ++ qcom,socver = <0>; ++ local-mac-address = [000000000000]; ++ mdiobus = <&mdio0>; ++ }; ++ }; ++}; +-- +1.9.1 +