From: John Crispin Date: Mon, 30 May 2016 20:51:14 +0000 (+0200) Subject: ipq806x: remove accidentially comitted file X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=0fa01e25ed1aeac975433c0222b96dd2c05097ba;p=openwrt%2Fstaging%2Fluka.git ipq806x: remove accidentially comitted file Signed-off-by: John Crispin --- diff --git a/target/linux/ipq806x/a b/target/linux/ipq806x/a deleted file mode 100644 index eddecefd6d..0000000000 --- a/target/linux/ipq806x/a +++ /dev/null @@ -1,464 +0,0 @@ -commit be3de98aef65403129a4b714ddce8ab71f563209 -Author: Ash Benz -Date: Fri May 27 22:26:45 2016 +0800 - - ipq806x/dts: Add Archer C2600 DTS - - Signed-off-by: Ash Benz - -diff --git a/target/linux/ipq806x/image/Makefile b/target/linux/ipq806x/image/Makefile -index 52cc1fa..77391d0 100644 ---- a/target/linux/ipq806x/image/Makefile -+++ b/target/linux/ipq806x/image/Makefile -@@ -36,11 +36,6 @@ define Build/append-dtb - cat $(DTS_DIR)/$(DEVICE_DTS).dtb >> $@ - endef - --define Build/append-new-dtb -- $(call Image/BuildDTB,../dts/$(DEVICE_DTS).dts,$@.dtb) -- cat $@.dtb >> $@ --endef -- - define Build/append-file - cat $(1) >> $@ - endef -@@ -95,7 +90,7 @@ define Device/TpSafeImage - PROFILES += $$(DEVICE_NAME) - FILESYSTEMS := squashfs - KERNEL_SUFFIX := -uImage -- KERNEL = kernel-bin | append-new-dtb | uImage none -+ KERNEL = kernel-bin | append-dtb | uImage none - KERNEL_NAME := zImage - TPLINK_BOARD_NAME := - IMAGES := factory.bin sysupgrade.bin -diff --git a/target/linux/ipq806x/patches-4.4/802-ARM-qcom-add-TPLink-C2600-device-tree.patch b/target/linux/ipq806x/patches-4.4/802-ARM-qcom-add-TPLink-C2600-device-tree.patch -new file mode 100644 -index 0000000..8952f33 ---- /dev/null -+++ b/target/linux/ipq806x/patches-4.4/802-ARM-qcom-add-TPLink-C2600-device-tree.patch -@@ -0,0 +1,425 @@ -+--- a/arch/arm/boot/dts/Makefile -++++ b/arch/arm/boot/dts/Makefile -+@@ -506,6 +506,7 @@ -+ qcom-apq8084-ifc6540.dtb \ -+ qcom-apq8084-mtp.dtb \ -+ qcom-ipq8064-ap148.dtb \ -++ qcom-ipq8064-c2600.dtb \ -+ qcom-ipq8064-db149.dtb \ -+ qcom-ipq8064-r7500.dtb \ -+ qcom-ipq8064-d7800.dtb \ -+--- /dev/null -++++ b/arch/arm/boot/dts/qcom-ipq8064-c2600.dts -+@@ -0,0 +1,412 @@ -++#include "qcom-ipq8064-v1.0.dtsi" -++#include -++ -++/ { -++ model = "TP-Link Archer C2600"; -++ compatible = "tplink,c2600", "qcom,ipq8064"; -++ -++ memory@0 { -++ reg = <0x42000000 0x1e000000>; -++ device_type = "memory"; -++ }; -++ -++ reserved-memory { -++ #address-cells = <1>; -++ #size-cells = <1>; -++ ranges; -++ rsvd@41200000 { -++ reg = <0x41200000 0x300000>; -++ no-map; -++ }; -++ }; -++ -++ aliases { -++ serial0 = &uart4; -++ mdio-gpio0 = &mdio0; -++ }; -++ -++ chosen { -++ linux,stdout-path = "serial0:115200n8"; -++ }; -++ -++ soc { -++ pinmux@800000 { -++ i2c4_pins: i2c4_pinmux { -++ pins = "gpio12", "gpio13"; -++ function = "gsbi4"; -++ bias-disable; -++ }; -++ -++ spi_pins: spi_pins { -++ mux { -++ pins = "gpio18", "gpio19", "gpio21"; -++ function = "gsbi5"; -++ drive-strength = <10>; -++ bias-none; -++ }; -++ }; -++ -++ nand_pins: nand_pins { -++ mux { -++ pins = "gpio34", "gpio35", "gpio36", -++ "gpio37", "gpio38", "gpio39", -++ "gpio40", "gpio41", "gpio42", -++ "gpio43", "gpio44", "gpio45", -++ "gpio46", "gpio47"; -++ function = "nand"; -++ drive-strength = <10>; -++ bias-disable; -++ }; -++ -++ pullups { -++ pins = "gpio39"; -++ bias-pull-up; -++ }; -++ -++ hold { -++ pins = "gpio40", "gpio41", "gpio42", -++ "gpio43", "gpio44", "gpio45", -++ "gpio46", "gpio47"; -++ bias-bus-hold; -++ }; -++ }; -++ -++ mdio0_pins: mdio0_pins { -++ mux { -++ pins = "gpio0", "gpio1"; -++ function = "gpio"; -++ drive-strength = <8>; -++ bias-disable; -++ }; -++ }; -++ -++ rgmii2_pins: rgmii2_pins { -++ mux { -++ pins = "gpio27", "gpio28", "gpio29", "gpio30", "gpio31", "gpio32", -++ "gpio51", "gpio52", "gpio59", "gpio60", "gpio61", "gpio62" ; -++ function = "rgmii2"; -++ drive-strength = <8>; -++ bias-disable; -++ }; -++ }; -++ }; -++ -++ gsbi@16300000 { -++ qcom,mode = ; -++ status = "ok"; -++ serial@16340000 { -++ status = "ok"; -++ }; -++ /* -++ * The i2c device on gsbi4 should not be enabled. -++ * On ipq806x designs gsbi4 i2c is meant for exclusive -++ * RPM usage. Turning this on in kernel manifests as -++ * i2c failure for the RPM. -++ */ -++ }; -++ -++ gsbi5: gsbi@1a200000 { -++ qcom,mode = ; -++ status = "ok"; -++ -++ spi4: spi@1a280000 { -++ status = "ok"; -++ spi-max-frequency = <50000000>; -++ -++ pinctrl-0 = <&spi_pins>; -++ pinctrl-names = "default"; -++ -++ cs-gpios = <&qcom_pinmux 20 0>; -++ -++ flash: m25p80@0 { -++ compatible = "s25fl256s1"; -++ #address-cells = <1>; -++ #size-cells = <1>; -++ spi-max-frequency = <50000000>; -++ reg = <0>; -++ -++ SBL1@0 { -++ label = "SBL1"; -++ reg = <0x0 0x20000>; -++ read-only; -++ }; -++ MIBIB@20000 { -++ label = "MIBIB"; -++ reg = <0x20000 0x20000>; -++ read-only; -++ }; -++ SBL2@40000 { -++ label = "SBL2"; -++ reg = <0x40000 0x20000>; -++ read-only; -++ }; -++ SBL3@60000 { -++ label = "SBL3"; -++ reg = <0x60000 0x30000>; -++ read-only; -++ }; -++ DDRCONFIG@90000 { -++ label = "DDRCONFIG"; -++ reg = <0x90000 0x10000>; -++ read-only; -++ }; -++ SSD@a0000 { -++ label = "SSD"; -++ reg = <0xa0000 0x10000>; -++ read-only; -++ }; -++ TZ@b0000 { -++ label = "TZ"; -++ reg = <0xb0000 0x30000>; -++ read-only; -++ }; -++ RPM@e0000 { -++ label = "RPM"; -++ reg = <0xe0000 0x20000>; -++ read-only; -++ }; -++ fs-uboot@100000 { -++ label = "fs-uboot"; -++ reg = <0x100000 0x70000>; -++ read-only; -++ }; -++ uboot-env@170000 { -++ label = "uboot-env"; -++ reg = <0x170000 0x40000>; -++ read-only; -++ }; -++ radio@1b0000 { -++ label = "radio"; -++ reg = <0x1b0000 0x40000>; -++ read-only; -++ }; -++ os-image@1f0000 { -++ label = "os-image"; -++ reg = <0x1f0000 0x200000>; -++ }; -++ rootfs@3f0000 { -++ label = "rootfs"; -++ reg = <0x3f0000 0x1b00000>; -++ }; -++ defaultmac: default-mac@1ef0000 { -++ label = "default-mac"; -++ reg = <0x1ef0000 0x00200>; -++ read-only; -++ }; -++ pin@1ef0200 { -++ label = "pin"; -++ reg = <0x1ef0200 0x00200>; -++ read-only; -++ }; -++ product-info@1ef0400 { -++ label = "product-info"; -++ reg = <0x1ef0400 0x0fc00>; -++ read-only; -++ }; -++ partition-table@1f00000 { -++ label = "partition-table"; -++ reg = <0x1f00000 0x10000>; -++ read-only; -++ }; -++ soft-version@1f10000 { -++ label = "soft-version"; -++ reg = <0x1f10000 0x10000>; -++ read-only; -++ }; -++ support-list@1f20000 { -++ label = "support-list"; -++ reg = <0x1f20000 0x10000>; -++ read-only; -++ }; -++ profile@1f30000 { -++ label = "profile"; -++ reg = <0x1f30000 0x10000>; -++ read-only; -++ }; -++ default-config@1f40000 { -++ label = "default-config"; -++ reg = <0x1f40000 0x10000>; -++ read-only; -++ }; -++ user-config@1f50000 { -++ label = "user-config"; -++ reg = <0x1f50000 0x40000>; -++ read-only; -++ }; -++ qos-db@1f90000 { -++ label = "qos-db"; -++ reg = <0x1f90000 0x40000>; -++ read-only; -++ }; -++ usb-config@1fd0000 { -++ label = "usb-config"; -++ reg = <0x1fd0000 0x10000>; -++ read-only; -++ }; -++ log@1fe0000 { -++ label = "log"; -++ reg = <0x1fe0000 0x20000>; -++ read-only; -++ }; -++ }; -++ }; -++ }; -++ -++ phy@100f8800 { /* USB3 port 1 HS phy */ -++ status = "ok"; -++ }; -++ -++ phy@100f8830 { /* USB3 port 1 SS phy */ -++ status = "ok"; -++ }; -++ -++ phy@110f8800 { /* USB3 port 0 HS phy */ -++ status = "ok"; -++ }; -++ -++ phy@110f8830 { /* USB3 port 0 SS phy */ -++ status = "ok"; -++ }; -++ -++ usb30@0 { -++ status = "ok"; -++ }; -++ -++ usb30@1 { -++ status = "ok"; -++ }; -++ -++ pcie0: pci@1b500000 { -++ status = "ok"; -++ phy-tx0-term-offset = <7>; -++ }; -++ -++ pcie1: pci@1b700000 { -++ status = "ok"; -++ phy-tx0-term-offset = <7>; -++ }; -++ -++ mdio0: mdio { -++ compatible = "virtual,mdio-gpio"; -++ #address-cells = <1>; -++ #size-cells = <0>; -++ gpios = <&qcom_pinmux 1 0 &qcom_pinmux 0 0>; -++ pinctrl-0 = <&mdio0_pins>; -++ pinctrl-names = "default"; -++ -++ phy0: ethernet-phy@0 { -++ device_type = "ethernet-phy"; -++ reg = <0>; -++ qca,ar8327-initvals = < -++ 0x00004 0x7600000 /* PAD0_MODE */ -++ 0x00008 0x1000000 /* PAD5_MODE */ -++ 0x0000c 0x80 /* PAD6_MODE */ -++ 0x000e4 0xaa545 /* MAC_POWER_SEL */ -++ 0x000e0 0xc74164de /* SGMII_CTRL */ -++ 0x0007c 0x4e /* PORT0_STATUS */ -++ 0x00094 0x4e /* PORT6_STATUS */ -++ >; -++ }; -++ -++ phy4: ethernet-phy@4 { -++ device_type = "ethernet-phy"; -++ reg = <4>; -++ }; -++ }; -++ -++ gmac1: ethernet@37200000 { -++ status = "ok"; -++ phy-mode = "rgmii"; -++ qcom,id = <1>; -++ -++ pinctrl-0 = <&rgmii2_pins>; -++ pinctrl-names = "default"; -++ -++ mtd-mac-address = <&defaultmac 0x8>; -++ mtd-mac-address-increment = <1>; -++ -++ fixed-link { -++ speed = <1000>; -++ full-duplex; -++ }; -++ }; -++ -++ gmac2: ethernet@37400000 { -++ status = "ok"; -++ phy-mode = "sgmii"; -++ qcom,id = <2>; -++ -++ mtd-mac-address = <&defaultmac 0x8>; -++ -++ fixed-link { -++ speed = <1000>; -++ full-duplex; -++ }; -++ }; -++ }; -++ -++ gpio-keys { -++ compatible = "gpio-keys"; -++ -++ wifi { -++ label = "wifi"; -++ gpios = <&qcom_pinmux 49 1>; -++ linux,code = ; -++ }; -++ -++ reset { -++ label = "reset"; -++ gpios = <&qcom_pinmux 64 1>; -++ linux,code = ; -++ }; -++ -++ wps { -++ label = "wps"; -++ gpios = <&qcom_pinmux 65 1>; -++ linux,code = ; -++ }; -++ ledgeneral { -++ label = "ledgeneral"; -++ gpios = <&qcom_pinmux 16 1>; -++ linux,code = ; -++ }; -++ }; -++ -++ gpio-leds { -++ compatible = "gpio-leds"; -++ -++ lan { -++ label = "lan:blue"; -++ gpios = <&qcom_pinmux 6 0>; -++ }; -++ usb4 { -++ label = "usb_4:blue"; -++ gpios = <&qcom_pinmux 7 0>; -++ }; -++ usb2 { -++ label = "usb_2:blue"; -++ gpios = <&qcom_pinmux 8 0>; -++ }; -++ wps { -++ label = "wps:blue"; -++ gpios = <&qcom_pinmux 9 0>; -++ }; -++ wan_blue { -++ label = "wan:blue"; -++ gpios = <&qcom_pinmux 33 1>; -++ }; -++ status { -++ label = "status:blue"; -++ gpios = <&qcom_pinmux 53 0>; -++ default-state = "on"; -++ }; -++ ledgnr { -++ label = "ledgnr:blue"; -++ gpios = <&qcom_pinmux 66 0>; -++ }; -++ }; -++}; -++ -++&adm_dma { -++ status = "ok"; -++};