From: Christian Lamparter Date: Thu, 15 Dec 2022 14:20:26 +0000 (+0100) Subject: ath79: fix dtc warnings in eap1200h X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=0f227720f99e340734521d8326c44d9ae1f40fef;p=openwrt%2Fstaging%2Fnbd.git ath79: fix dtc warnings in eap1200h |109.3-19: Warning (reg_format): macaddr@0:reg:property has invalid length (8 bytes) |113.3-24: Warning (reg_format): calibration@1000:reg: property has invalid length (8 bytes) |117.3-24: Warning (reg_format): calibration@5000:reg: property has invalid length (8 bytes) also integrate the art-nodes nodes back into the partition-subnode and change the calibration labels to match what everyone else is doing. Signed-off-by: Christian Lamparter --- diff --git a/target/linux/ath79/dts/qca9557_engenius_eap1200h.dts b/target/linux/ath79/dts/qca9557_engenius_eap1200h.dts index 13c03e717a..beb3e5ee07 100644 --- a/target/linux/ath79/dts/qca9557_engenius_eap1200h.dts +++ b/target/linux/ath79/dts/qca9557_engenius_eap1200h.dts @@ -57,10 +57,26 @@ }; &partitions { - art: partition@ff0000 { + partition@ff0000 { label = "art"; reg = <0xff0000 0x010000>; read-only; + + compatible = "nvmem-cells"; + #address-cells = <1>; + #size-cells = <1>; + + macaddr_art_0: macaddr@0 { + reg = <0x0 0x6>; + }; + + calibration_art_1000: calibration@1000 { + reg = <0x1000 0x440>; + }; + + calibration_art_5000: calibration@5000 { + reg = <0x5000 0x844>; + }; }; }; @@ -89,7 +105,7 @@ &wmac { status = "okay"; - nvmem-cells = <&macaddr_art_0>, <&calibration_ath9k>; + nvmem-cells = <&macaddr_art_0>, <&calibration_art_1000>; nvmem-cell-names = "mac-address", "calibration"; mac-address-increment = <1>; }; @@ -97,23 +113,7 @@ &ath10k { status = "okay"; - nvmem-cells = <&macaddr_art_0>, <&calibration_ath10k>; + nvmem-cells = <&macaddr_art_0>, <&calibration_art_5000>; nvmem-cell-names = "mac-address", "calibration"; mac-address-increment = <2>; }; - -&art { - compatible = "nvmem-cells"; - - macaddr_art_0: macaddr@0 { - reg = <0x0 0x6>; - }; - - calibration_ath9k: calibration@1000 { - reg = <0x1000 0x440>; - }; - - calibration_ath10k: calibration@5000 { - reg = <0x5000 0x844>; - }; -};