From: John Audia Date: Wed, 14 Oct 2020 11:54:05 +0000 (-0400) Subject: kernel: bump 5.4 to 5.4.71 X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=0efec6a00879421b9516c9d32729dc232d8c5510;p=openwrt%2Fstaging%2Fldir.git kernel: bump 5.4 to 5.4.71 All modifications made by update_kernel.sh Build system: x86_64 Build-tested: ipq806x/R7800, ath79/generic, bcm27xx/bcm2711, lantiq/Easybox 904 xDSL Run-tested: ipq806x/R7800, lantiq/Easybox 904 xDSL No dmesg regressions, everything functional Signed-off-by: John Audia [add lantiq test reports] Signed-off-by: Adrian Schmutzler --- diff --git a/include/kernel-version.mk b/include/kernel-version.mk index 9e91c84fff..bec2b73608 100644 --- a/include/kernel-version.mk +++ b/include/kernel-version.mk @@ -7,10 +7,10 @@ ifdef CONFIG_TESTING_KERNEL endif LINUX_VERSION-4.19 = .138 -LINUX_VERSION-5.4 = .70 +LINUX_VERSION-5.4 = .71 LINUX_KERNEL_HASH-4.19.138 = d15c27d05f6c527269b75b30cc72972748e55720e7e00ad8abbaa4fe3b1d5e02 -LINUX_KERNEL_HASH-5.4.70 = c0b3d8085c5ba235df38b00b740e053659709e8a5ca21957a239f6bc22c45007 +LINUX_KERNEL_HASH-5.4.71 = 737049ef3cf38d46ee3b377354336cdbc1c4dd95b4e54975a70716f96c8d6cc7 remove_uri_prefix=$(subst git://,,$(subst http://,,$(subst https://,,$(1)))) sanitize_uri=$(call qstrip,$(subst @,_,$(subst :,_,$(subst .,_,$(subst -,_,$(subst /,_,$(1))))))) diff --git a/target/linux/bcm27xx/patches-5.4/950-0027-mm-Remove-the-PFN-busy-warning.patch b/target/linux/bcm27xx/patches-5.4/950-0027-mm-Remove-the-PFN-busy-warning.patch index 508527359f..b8c9ed0c80 100644 --- a/target/linux/bcm27xx/patches-5.4/950-0027-mm-Remove-the-PFN-busy-warning.patch +++ b/target/linux/bcm27xx/patches-5.4/950-0027-mm-Remove-the-PFN-busy-warning.patch @@ -14,7 +14,7 @@ Signed-off-by: Eric Anholt --- a/mm/page_alloc.c +++ b/mm/page_alloc.c -@@ -8486,8 +8486,6 @@ int alloc_contig_range(unsigned long sta +@@ -8489,8 +8489,6 @@ int alloc_contig_range(unsigned long sta /* Make sure the range is really isolated. */ if (test_pages_isolated(outer_start, end, false)) { diff --git a/target/linux/generic/hack-5.4/700-swconfig_switch_drivers.patch b/target/linux/generic/hack-5.4/700-swconfig_switch_drivers.patch index b1b7ce7d04..ddb642728b 100644 --- a/target/linux/generic/hack-5.4/700-swconfig_switch_drivers.patch +++ b/target/linux/generic/hack-5.4/700-swconfig_switch_drivers.patch @@ -12,7 +12,7 @@ Signed-off-by: Felix Fietkau --- a/drivers/net/phy/Kconfig +++ b/drivers/net/phy/Kconfig -@@ -249,6 +249,89 @@ config LED_TRIGGER_PHY +@@ -250,6 +250,89 @@ config LED_TRIGGER_PHY for any speed known to the PHY. diff --git a/target/linux/generic/pending-5.4/120-Fix-alloc_node_mem_map-with-ARCH_PFN_OFFSET-calcu.patch b/target/linux/generic/pending-5.4/120-Fix-alloc_node_mem_map-with-ARCH_PFN_OFFSET-calcu.patch index e70b660604..a8a0e27599 100644 --- a/target/linux/generic/pending-5.4/120-Fix-alloc_node_mem_map-with-ARCH_PFN_OFFSET-calcu.patch +++ b/target/linux/generic/pending-5.4/120-Fix-alloc_node_mem_map-with-ARCH_PFN_OFFSET-calcu.patch @@ -71,7 +71,7 @@ Signed-off-by: Tobias Wolf --- a/mm/page_alloc.c +++ b/mm/page_alloc.c -@@ -6860,7 +6860,7 @@ static void __ref alloc_node_mem_map(str +@@ -6861,7 +6861,7 @@ static void __ref alloc_node_mem_map(str mem_map = NODE_DATA(0)->node_mem_map; #if defined(CONFIG_HAVE_MEMBLOCK_NODE_MAP) || defined(CONFIG_FLATMEM) if (page_to_pfn(mem_map) != pgdat->node_start_pfn) diff --git a/target/linux/generic/pending-5.4/752-net-phy-add-Broadcom-BCM84881-PHY-driver.patch b/target/linux/generic/pending-5.4/752-net-phy-add-Broadcom-BCM84881-PHY-driver.patch index 8929f1f19e..783dec0479 100644 --- a/target/linux/generic/pending-5.4/752-net-phy-add-Broadcom-BCM84881-PHY-driver.patch +++ b/target/linux/generic/pending-5.4/752-net-phy-add-Broadcom-BCM84881-PHY-driver.patch @@ -18,7 +18,7 @@ Signed-off-by: David S. Miller --- a/drivers/net/phy/Kconfig +++ b/drivers/net/phy/Kconfig -@@ -329,6 +329,12 @@ config BROADCOM_PHY +@@ -330,6 +330,12 @@ config BROADCOM_PHY Currently supports the BCM5411, BCM5421, BCM5461, BCM54616S, BCM5464, BCM5481, BCM54810 and BCM5482 PHYs. diff --git a/target/linux/ipq40xx/patches-5.4/700-net-add-qualcomm-mdio.patch b/target/linux/ipq40xx/patches-5.4/700-net-add-qualcomm-mdio.patch index f4e3f7069e..8786330d3b 100644 --- a/target/linux/ipq40xx/patches-5.4/700-net-add-qualcomm-mdio.patch +++ b/target/linux/ipq40xx/patches-5.4/700-net-add-qualcomm-mdio.patch @@ -1,6 +1,6 @@ --- a/drivers/net/phy/Kconfig +++ b/drivers/net/phy/Kconfig -@@ -580,6 +580,13 @@ config XILINX_GMII2RGMII +@@ -581,6 +581,13 @@ config XILINX_GMII2RGMII the Reduced Gigabit Media Independent Interface(RGMII) between Ethernet physical media devices and the Gigabit Ethernet controller. diff --git a/target/linux/ipq40xx/patches-5.4/705-net-add-qualcomm-ar40xx-phy.patch b/target/linux/ipq40xx/patches-5.4/705-net-add-qualcomm-ar40xx-phy.patch index 1737181520..a90ae0eb89 100644 --- a/target/linux/ipq40xx/patches-5.4/705-net-add-qualcomm-ar40xx-phy.patch +++ b/target/linux/ipq40xx/patches-5.4/705-net-add-qualcomm-ar40xx-phy.patch @@ -1,6 +1,6 @@ --- a/drivers/net/phy/Kconfig +++ b/drivers/net/phy/Kconfig -@@ -587,6 +587,13 @@ config MDIO_IPQ40XX +@@ -588,6 +588,13 @@ config MDIO_IPQ40XX This driver supports the MDIO interface found in Qualcomm Atheros ipq40xx Soc chip. diff --git a/target/linux/layerscape/patches-5.4/701-net-0327-at803x-Address-packet-drops-at-low-traffic-rate-due-.patch b/target/linux/layerscape/patches-5.4/701-net-0327-at803x-Address-packet-drops-at-low-traffic-rate-due-.patch index f6cf0e0430..36c393f2d0 100644 --- a/target/linux/layerscape/patches-5.4/701-net-0327-at803x-Address-packet-drops-at-low-traffic-rate-due-.patch +++ b/target/linux/layerscape/patches-5.4/701-net-0327-at803x-Address-packet-drops-at-low-traffic-rate-due-.patch @@ -22,7 +22,7 @@ Signed-off-by: Vladimir Oltean --- a/drivers/net/phy/Kconfig +++ b/drivers/net/phy/Kconfig -@@ -370,6 +370,16 @@ config AT803X_PHY +@@ -371,6 +371,16 @@ config AT803X_PHY ---help--- Currently supports the AT8030 and AT8035 model diff --git a/target/linux/layerscape/patches-5.4/701-net-0328-net-phy-Inphi-IN112525_s03-retimer-support.patch b/target/linux/layerscape/patches-5.4/701-net-0328-net-phy-Inphi-IN112525_s03-retimer-support.patch index 46f45dfc69..a074c719d6 100644 --- a/target/linux/layerscape/patches-5.4/701-net-0328-net-phy-Inphi-IN112525_s03-retimer-support.patch +++ b/target/linux/layerscape/patches-5.4/701-net-0328-net-phy-Inphi-IN112525_s03-retimer-support.patch @@ -15,7 +15,7 @@ Signed-off-by: Florin Chiculita --- a/drivers/net/phy/Kconfig +++ b/drivers/net/phy/Kconfig -@@ -478,6 +478,11 @@ config ICPLUS_PHY +@@ -479,6 +479,11 @@ config ICPLUS_PHY ---help--- Currently supports the IP175C and IP1001 PHYs. diff --git a/target/linux/mediatek/patches-5.4/0003-switch-add-mt7531.patch b/target/linux/mediatek/patches-5.4/0003-switch-add-mt7531.patch index 7214dc1b08..2512ed3142 100644 --- a/target/linux/mediatek/patches-5.4/0003-switch-add-mt7531.patch +++ b/target/linux/mediatek/patches-5.4/0003-switch-add-mt7531.patch @@ -1,6 +1,6 @@ --- a/drivers/net/phy/Kconfig +++ b/drivers/net/phy/Kconfig -@@ -332,6 +332,8 @@ config RTL8367B_PHY +@@ -333,6 +333,8 @@ config RTL8367B_PHY endif # RTL8366_SMI diff --git a/target/linux/uml/patches-5.4/101-mconsole-exec.patch b/target/linux/uml/patches-5.4/101-mconsole-exec.patch index 827e85606b..ca4f27b53f 100644 --- a/target/linux/uml/patches-5.4/101-mconsole-exec.patch +++ b/target/linux/uml/patches-5.4/101-mconsole-exec.patch @@ -153,7 +153,7 @@ pid_t pid; --- a/kernel/umh.c +++ b/kernel/umh.c -@@ -75,6 +75,28 @@ static int call_usermodehelper_exec_asyn +@@ -76,6 +76,28 @@ static int call_usermodehelper_exec_asyn flush_signal_handlers(current, 1); spin_unlock_irq(¤t->sighand->siglock); @@ -180,9 +180,9 @@ + } + /* - * Our parent (unbound workqueue) runs with elevated scheduling - * priority. Avoid propagating that into the userspace child. -@@ -353,6 +375,20 @@ static void helper_unlock(void) + * Initial kernel threads share ther FS with init, in order to + * get the init root directory. But we've now created a new +@@ -362,6 +384,20 @@ static void helper_unlock(void) wake_up(&running_helpers_waitq); }