From: Mathias Kresin Date: Wed, 27 Dec 2017 23:40:49 +0000 (+0100) Subject: kirkwood: drop support for orphaned boards X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=0ebdf0c1d34a80ae4d4c7382d49bca3a7c636284;p=openwrt%2Fstaging%2Fkaloz.git kirkwood: drop support for orphaned boards No image build code for the Guruplug, Sheevaplug and NSA310S exists. Drop support for the boards for now. Signed-off-by: Mathias Kresin --- diff --git a/package/boot/uboot-envtools/files/kirkwood b/package/boot/uboot-envtools/files/kirkwood index 3b770c12f4..cfd3550ea9 100644 --- a/package/boot/uboot-envtools/files/kirkwood +++ b/package/boot/uboot-envtools/files/kirkwood @@ -14,14 +14,11 @@ board=$(board_name) case "$board" in dockstar|\ -guruplug-server-plus|\ ib62x0|\ linksys-viper|\ nsa310b|\ nsa325|\ -pogo_e02|\ -sheevaplug|\ -sheevaplug-esata) +pogo_e02) ubootenv_add_uci_config "/dev/mtd1" "0x0" "0x20000" "0x20000" ;; linksys-audi) diff --git a/package/boot/uboot-kirkwood/Makefile b/package/boot/uboot-kirkwood/Makefile index 929fca6aeb..94cc30bc06 100644 --- a/package/boot/uboot-kirkwood/Makefile +++ b/package/boot/uboot-kirkwood/Makefile @@ -64,10 +64,6 @@ define U-Boot/pogo_e02_second_stage NAME:=Cloud Engines Pogoplug E02 (second stage) endef -define U-Boot/sheevaplug - NAME:=SheevaPlug -endef - UBOOT_TARGETS := \ dockstar dockstar_second_stage \ goflexhome \ @@ -75,8 +71,7 @@ UBOOT_TARGETS := \ iconnect iconnect_second_stage \ nsa310 \ nsa325 \ - pogo_e02 pogo_e02_second_stage \ - sheevaplug + pogo_e02 pogo_e02_second_stage define Build/Configure $(if $(findstring _second_stage,$(BUILD_VARIANT)), diff --git a/package/boot/uboot-kirkwood/patches/200-openwrt-config.patch b/package/boot/uboot-kirkwood/patches/200-openwrt-config.patch index d6246dc934..04614f77cc 100644 --- a/package/boot/uboot-kirkwood/patches/200-openwrt-config.patch +++ b/package/boot/uboot-kirkwood/patches/200-openwrt-config.patch @@ -78,15 +78,6 @@ +#include "openwrt-kirkwood-common.h" + #endif /* _CONFIG_POGO_E02_H */ ---- a/include/configs/sheevaplug.h -+++ b/include/configs/sheevaplug.h -@@ -96,4 +96,6 @@ - #define CONFIG_SYS_ATA_IDE1_OFFSET MV_SATA_PORT1_OFFSET - #endif /* CONFIG_IDE */ - -+#include "openwrt-kirkwood-common.h" -+ - #endif /* _CONFIG_SHEEVAPLUG_H */ --- a/include/configs/goflexhome.h +++ b/include/configs/goflexhome.h @@ -105,4 +105,6 @@ @@ -175,15 +166,3 @@ +CONFIG_FIT_VERBOSE=y +CONFIG_LZMA=y +CONFIG_LZO=y ---- a/configs/sheevaplug_defconfig -+++ b/configs/sheevaplug_defconfig -@@ -28,5 +28,8 @@ CONFIG_SYS_NS16550=y - CONFIG_USB=y - CONFIG_USB_EHCI_HCD=y - CONFIG_USB_STORAGE=y --CONFIG_LZMA=y - CONFIG_OF_LIBFDT=y -+CONFIG_FIT=y -+CONFIG_FIT_VERBOSE=y -+CONFIG_LZMA=y -+CONFIG_LZO=y diff --git a/target/linux/kirkwood/base-files/etc/board.d/01_leds b/target/linux/kirkwood/base-files/etc/board.d/01_leds index 0d89759180..a0b4eca04f 100755 --- a/target/linux/kirkwood/base-files/etc/board.d/01_leds +++ b/target/linux/kirkwood/base-files/etc/board.d/01_leds @@ -34,9 +34,6 @@ case "$board" in ucidef_set_led_default "health" "health" "pogo_e02:green:health" "1" ucidef_set_led_default "fault" "fault" "pogo_e02:orange:fault" "1" ;; -"guruplug-server-plus") - ucidef_set_led_timer "health" "health" "guruplug:red:health" "200" "800" - ;; "nsa310b") ucidef_set_led_default "health" "health" "nsa310:green:sys" "1" ucidef_set_led_usbhost "usb" "USB" "nsa310:green:usb" @@ -49,10 +46,6 @@ case "$board" in ucidef_set_led_ataport "hdd1" "HDD1" "nsa325:green:sata1" "1" ucidef_set_led_ataport "hdd2" "HDD2" "nsa325:green:sata2" "2" ;; -"sheevaplug" | \ -"sheevaplug-esata") - ucidef_set_led_timer "health" "health" "sheevaplug:blue:health" "200" "800" - ;; *) ;; esac diff --git a/target/linux/kirkwood/base-files/etc/board.d/02_network b/target/linux/kirkwood/base-files/etc/board.d/02_network index 85049d2968..549d232df9 100755 --- a/target/linux/kirkwood/base-files/etc/board.d/02_network +++ b/target/linux/kirkwood/base-files/etc/board.d/02_network @@ -16,15 +16,9 @@ case "$board" in "goflexnet"|\ "ib62x0"|\ "iconnect"|\ -"nsa310s"|\ -"pogo_e02"|\ -"sheevaplug"|\ -"sheevaplug-esata") +"pogo_e02") ucidef_set_interface_lan "eth0" "dhcp" ;; -"guruplug-server-plus") - ucidef_set_interface_lan "eth0 eth1" "dhcp" - ;; "linksys-audi"|\ "linksys-viper") ucidef_add_switch "switch0" \ diff --git a/target/linux/kirkwood/base-files/lib/kirkwood.sh b/target/linux/kirkwood/base-files/lib/kirkwood.sh index f1229fa97b..6474b06176 100755 --- a/target/linux/kirkwood/base-files/lib/kirkwood.sh +++ b/target/linux/kirkwood/base-files/lib/kirkwood.sh @@ -49,26 +49,10 @@ kirkwood_board_detect() { name="linksys-viper" ;; - "Globalscale Technologies Guruplug Server Plus") - name="guruplug-server-plus" - ;; - - "Globalscale Technologies SheevaPlug") - name="sheevaplug" - ;; - - "Globalscale Technologies eSATA SheevaPlug") - name="sheevaplug-esata" - ;; - "ZyXEL NSA310b") name="nsa310b" ;; - "ZyXEL NSA310S") - name="nsa310s" - ;; - "ZyXEL NSA325") name="nsa325" ;; diff --git a/target/linux/kirkwood/patches-4.9/107-03-nsa310s.patch b/target/linux/kirkwood/patches-4.9/107-03-nsa310s.patch deleted file mode 100644 index 0e69f0cfa4..0000000000 --- a/target/linux/kirkwood/patches-4.9/107-03-nsa310s.patch +++ /dev/null @@ -1,267 +0,0 @@ ---- a/arch/arm/boot/dts/Makefile -+++ b/arch/arm/boot/dts/Makefile -@@ -239,6 +239,7 @@ dtb-$(CONFIG_MACH_KIRKWOOD) += \ - kirkwood-nsa310.dtb \ - kirkwood-nsa310a.dtb \ - kirkwood-nsa310b.dtb \ -+ kirkwood-nsa310s.dtb \ - kirkwood-nsa320.dtb \ - kirkwood-nsa325.dtb \ - kirkwood-openblocks_a6.dtb \ ---- /dev/null -+++ b/arch/arm/boot/dts/kirkwood-nsa310s.dts -@@ -0,0 +1,254 @@ -+/dts-v1/; -+ -+#include "kirkwood-nsa3x0-common.dtsi" -+ -+/ { -+ model = "ZyXEL NSA310S"; -+ compatible = "zyxel,nsa320s", "marvell,kirkwood-88f6702", "marvell,kirkwood"; -+ -+ memory { -+ device_type = "memory"; -+ reg = <0x00000000 0x10000000>; -+ }; -+ -+ chosen { -+ bootargs = "console=ttyS0,115200n8 earlyprintk"; -+ stdout-path = &uart0; -+ }; -+ -+ ocp@f1000000 { -+ pinctrl: pin-controller@10000 { -+ pinctrl-names = "default"; -+ -+ pmx_sata0: pmx-sata0 { -+ marvell,pins; -+ marvell,function = "sata0"; -+ }; -+ -+ pmx_sata1: pmx-sata1 { -+ marvell,pins; -+ marvell,function = "sata1"; -+ }; -+ -+ pmx_usb_power: pmx-usb-power { -+ marvell,pins = "mpp21"; -+ marvell,function = "gpio"; -+ }; -+ -+ pmx_pwr_off: pmx-pwr-off { -+ marvell,pins = "mpp27"; -+ marvell,function = "gpio"; -+ }; -+ -+ pmx_btn_reset: pmx-btn-reset { -+ marvell,pins = "mpp24"; -+ marvell,function = "gpio"; -+ }; -+ -+ pmx_btn_copy: pmx-btn-copy { -+ marvell,pins = "mpp25"; -+ marvell,function = "gpio"; -+ }; -+ -+ pmx_btn_power: pmx-btn-power { -+ marvell,pins = "mpp26"; -+ marvell,function = "gpio"; -+ }; -+ -+ pmx_led_hdd2_green: pmx-led-hdd2-green { -+ marvell,pins = "mpp34"; -+ marvell,function = "gpio"; -+ }; -+ -+ pmx_led_hdd2_red: pmx-led-hdd2-red { -+ marvell,pins = "mpp12"; -+ marvell,function = "gpio"; -+ }; -+ -+ pmx_led_usb_green: pmx-led-usb-green { -+ marvell,pins = "mpp15"; -+ marvell,function = "gpio"; -+ }; -+ -+ pmx_led_copy_green: pmx-led-copy-green { -+ marvell,pins = "mpp22"; -+ marvell,function = "gpio"; -+ }; -+ -+ pmx_led_copy_red: pmx-led-copy-red { -+ marvell,pins = "mpp23"; -+ marvell,function = "gpio"; -+ }; -+ -+ pmx_led_sys_green: pmx-led-sys-green { -+ marvell,pins = "mpp28"; -+ marvell,function = "gpio"; -+ }; -+ -+ pmx_led_sys_orange: pmx-led-sys-orange { -+ marvell,pins = "mpp29"; -+ marvell,function = "gpio"; -+ }; -+ -+ pmx_led_hdd1_green: pmx-led-hdd1-green { -+ marvell,pins = "mpp16"; -+ marvell,function = "gpio"; -+ }; -+ -+ pmx_led_hdd1_red: pmx-led-hdd1-red { -+ marvell,pins = "mpp13"; -+ marvell,function = "gpio"; -+ }; -+ -+ pmx_pwr_sata1: pmx-pwr-sata1 { -+ marvell,pins = "mpp33"; -+ marvell,function = "gpio"; -+ }; -+ -+ }; -+ -+ i2c@11000 { -+ status = "okay"; -+ -+ ht1382: rtc@68 { -+ compatible = "htk,ht1382"; -+ reg = <0x68>; -+ }; -+ }; -+ }; -+ -+ regulators { -+ compatible = "simple-bus"; -+ #address-cells = <1>; -+ #size-cells = <0>; -+ pinctrl-0 = <&pmx_pwr_sata1>; -+ pinctrl-names = "default"; -+ -+ usb0_power: regulator@1 { -+ enable-active-high; -+ }; -+ -+ sata1_power: regulator@2 { -+ compatible = "regulator-fixed"; -+ reg = <2>; -+ regulator-name = "SATA1 Power"; -+ regulator-min-microvolt = <5000000>; -+ regulator-max-microvolt = <5000000>; -+ regulator-always-on; -+ regulator-boot-on; -+ enable-active-high; -+ gpio = <&gpio1 1 GPIO_ACTIVE_HIGH>; -+ }; -+ }; -+ -+ gpio_keys { -+ power { -+ gpios = <&gpio0 26 GPIO_ACTIVE_HIGH>; -+ }; -+ copy { -+ gpios = <&gpio0 25 GPIO_ACTIVE_LOW>; -+ }; -+ reset { -+ gpios = <&gpio0 24 GPIO_ACTIVE_LOW>; -+ }; -+ }; -+ -+ gpio-leds { -+ compatible = "gpio-leds"; -+ -+ green-sys { -+ label = "nsa310s:green:sys"; -+ gpios = <&gpio0 28 GPIO_ACTIVE_HIGH>; -+ }; -+ orange-sys { -+ label = "nsa310s:orange:sys"; -+ gpios = <&gpio0 29 GPIO_ACTIVE_HIGH>; -+ }; -+ green-hdd1 { -+ label = "nsa310s:green:hdd1"; -+ gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>; -+ }; -+ red-hdd1 { -+ label = "nsa310s:red:hdd1"; -+ gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>; -+ }; -+ green-hdd2 { -+ label = "nsa310s:green:hdd2"; -+ gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>; -+ }; -+ red-hdd2 { -+ label = "nsa310s:red:hdd2"; -+ gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>; -+ }; -+ green-usb { -+ label = "nsa310s:green:usb"; -+ gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>; -+ }; -+ green-copy { -+ label = "nsa310s:green:copy"; -+ gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>; -+ }; -+ red-copy { -+ label = "nsa310s:red:copy"; -+ gpios = <&gpio0 23 GPIO_ACTIVE_HIGH>; -+ }; -+ }; -+ -+ gpio_poweroff { -+ gpios = <&gpio0 27 GPIO_ACTIVE_HIGH>; -+ }; -+}; -+ -+&nand { -+ status = "okay"; -+ chip-delay = <35>; -+ -+ partition@0 { -+ label = "uboot"; -+ reg = <0x0000000 0xe0000>; -+ read-only; -+ }; -+ -+ partition@e0000 { -+ label = "uboot_env"; -+ reg = <0xe0000 0x100000>; -+ }; -+ -+ partition@100000 { -+ label = "second stage u-boot"; -+ reg = <0x100000 0x200000>; -+ }; -+ -+ partition@200000 { -+ label = "ubi"; -+ reg = <0x200000 0x7e00000>; -+ }; -+}; -+ -+&sata { -+ status = "okay"; -+ nr-ports = <2>; -+}; -+ -+&mdio { -+ status = "okay"; -+ ethphy0: ethernet-phy@1 { -+ compatible = "marvell,88e1318s"; -+ reg = <1>; -+ marvell,reg-init = <0x1 0x16 0x0 0x3>, -+ <0x1 0x10 0x0 0x1017>, -+ <0x1 0x11 0x0 0x4408>, -+ <0x1 0x16 0x0 0x0>, -+ <0x1 0x4 0x0 0x1e1>, -+ <0x1 0x9 0x0 0x300>, -+ <0x1 0x10 0x0 0x3860>, -+ <0x1 0x0 0x0 0x9140>; -+ }; -+}; -+ -+ð0 { -+ status = "okay"; -+ ethernet0-port@0 { -+ phy-handle = <ðphy0>; -+ }; -+}; diff --git a/target/linux/kirkwood/patches-4.9/108-on100.patch b/target/linux/kirkwood/patches-4.9/108-on100.patch index 28c3e535d2..3cab70aaa8 100644 --- a/target/linux/kirkwood/patches-4.9/108-on100.patch +++ b/target/linux/kirkwood/patches-4.9/108-on100.patch @@ -163,8 +163,8 @@ +}; --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile -@@ -242,6 +242,7 @@ dtb-$(CONFIG_MACH_KIRKWOOD) += \ - kirkwood-nsa310s.dtb \ +@@ -241,6 +241,7 @@ dtb-$(CONFIG_MACH_KIRKWOOD) += \ + kirkwood-nsa310b.dtb \ kirkwood-nsa320.dtb \ kirkwood-nsa325.dtb \ + kirkwood-on100.dtb \