From: Robert Marko <robimarko@gmail.com>
Date: Fri, 11 Aug 2023 21:51:40 +0000 (+0200)
Subject: ipq40xx: Use SoC DTSI for Teltonika RUTX
X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=0e6982b253b9c2ae0975aabe6318ad2d03f7d76c;p=openwrt%2Fopenwrt.git

ipq40xx: Use SoC DTSI for Teltonika RUTX

Teltonika RUTX currently is the only device pulling in DK01 DTSI and thus
preventing removal of DK01 and DK04 support.

So, lets add the missing nodes from DK01 DTSI and use the SoC DTSI instead.

Signed-off-by: Robert Marko <robimarko@gmail.com>
---

diff --git a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-rutx.dtsi b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-rutx.dtsi
index df9425b12a..737e7365a6 100644
--- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-rutx.dtsi
+++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-rutx.dtsi
@@ -1,9 +1,10 @@
 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
 
-#include "qcom-ipq4019-ap.dk01.1.dtsi"
+#include "qcom-ipq4019.dtsi"
 
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
+#include <dt-bindings/soc/qcom,tcsr.h>
 
 / {
 	memory {
@@ -11,28 +12,39 @@
 		reg = <0x80000000 0x10000000>;
 	};
 
+	aliases {
+		serial0 = &blsp1_uart1;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
 	soc {
-		pinctrl@1000000 {
-			mdio_pins: mdio_pinmux {
-				mux_1 {
-					pins = "gpio53";
-					function = "mdio";
-					bias-pull-up;
-				};
-				mux_2 {
-					pins = "gpio52";
-					function = "mdc";
-					bias-pull-up;
-				};
-			};
-
-			i2c_0_pins: i2c_0_pinmux {
-				mux {
-					pins = "gpio58", "gpio59";
-					function = "blsp_i2c0";
-					bias-disable;
-				};
-			};
+		tcsr@1949000 {
+			compatible = "qcom,tcsr";
+			reg = <0x1949000 0x100>;
+			qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
+		};
+
+		tcsr@194b000 {
+			status = "okay";
+
+			compatible = "qcom,tcsr";
+			reg = <0x194b000 0x100>;
+			qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>;
+		};
+
+		ess_tcsr@1953000 {
+			compatible = "qcom,tcsr";
+			reg = <0x1953000 0x1000>;
+			qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
+		};
+
+		tcsr@1957000 {
+			compatible = "qcom,tcsr";
+			reg = <0x1957000 0x100>;
+			qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
 		};
 
 		keys {
@@ -47,9 +59,91 @@
 	};
 };
 
+&prng {
+	status = "okay";
+};
+
+&watchdog {
+	status = "okay";
+};
+
+&cryptobam {
+	status = "okay";
+};
+
+&crypto {
+	status = "okay";
+};
+
+&tlmm {
+	serial_pins: serial_pinmux {
+		mux {
+			pins = "gpio60", "gpio61";
+			function = "blsp_uart0";
+			bias-disable;
+		};
+	};
+
+	spi_0_pins: spi_0_pinmux {
+		pinmux {
+			function = "blsp_spi0";
+			pins = "gpio55", "gpio56", "gpio57";
+		};
+		pinmux_cs {
+			function = "gpio";
+			pins = "gpio54";
+		};
+		pinconf {
+			pins = "gpio55", "gpio56", "gpio57";
+			drive-strength = <12>;
+			bias-disable;
+		};
+		pinconf_cs {
+			pins = "gpio54";
+			drive-strength = <2>;
+			bias-disable;
+			output-high;
+		};
+	};
+
+	mdio_pins: mdio_pinmux {
+		mux_1 {
+			pins = "gpio53";
+			function = "mdio";
+			bias-pull-up;
+		};
+		mux_2 {
+			pins = "gpio52";
+			function = "mdc";
+			bias-pull-up;
+		};
+	};
+
+	i2c_0_pins: i2c_0_pinmux {
+		mux {
+			pins = "gpio58", "gpio59";
+			function = "blsp_i2c0";
+			bias-disable;
+		};
+	};
+};
+
+&blsp_dma {
+	status = "okay";
+};
+
+&blsp1_uart1 {
+	pinctrl-0 = <&serial_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
 &blsp1_spi1 {
+	pinctrl-0 = <&spi_0_pins>;
+	pinctrl-names = "default";
 	cs-gpios = <&tlmm 54 0>, <&tlmm 63 0>;
 	num-cs = <2>;
+	status = "okay";
 
 	xt25f128b@0 {
 		/*
@@ -208,3 +302,23 @@
 	pinctrl-names = "default";
 	phy-reset-gpio = <&tlmm 62 0>;
 };
+
+&usb3_ss_phy {
+	status = "okay";
+};
+
+&usb3_hs_phy {
+	status = "okay";
+};
+
+&usb3 {
+	status = "okay";
+};
+
+&usb2_hs_phy {
+	status = "okay";
+};
+
+&usb2 {
+	status = "okay";
+};