From: Ivo van Doorn <ivdoorn@gmail.com>
Date: Tue, 11 Nov 2008 23:01:37 +0000 (+0100)
Subject: rt2x00: Fix TX failure path
X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=0e3de99846489424c2cba952e0a52c269f01009a;p=openwrt%2Fstaging%2Fblogic.git

rt2x00: Fix TX failure path

The callback function write_tx_data() can only fail
when our ENTRY_OWNER_DEVICE_DATA flag on a queue entry
failed to determine the entry was not available and
it is in fact still owned by the hardware.
This means that if that function fails the queue
must be stopped in mac80211.

When rt2x00queue_get_queue() returns NULL in the TX
path, it means mac80211 has passed us an invalid queue,
although this should be impossible, it shouldn't hurt
if we send mac80211 a signal to stop the queue either.

Both issues can simply be resolved by removing their
manual failure handler and making them use the failure path
provided in rt2x00mac_tx().

Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---

diff --git a/drivers/net/wireless/rt2x00/rt2x00mac.c b/drivers/net/wireless/rt2x00/rt2x00mac.c
index 48636b0dd895..4c0395729066 100644
--- a/drivers/net/wireless/rt2x00/rt2x00mac.c
+++ b/drivers/net/wireless/rt2x00/rt2x00mac.c
@@ -132,8 +132,7 @@ int rt2x00mac_tx(struct ieee80211_hw *hw, struct sk_buff *skb)
 		ERROR(rt2x00dev,
 		      "Attempt to send packet over invalid queue %d.\n"
 		      "Please file bug report to %s.\n", qid, DRV_PROJECT);
-		dev_kfree_skb_any(skb);
-		return NETDEV_TX_OK;
+		goto exit_fail;
 	}
 
 	/*
diff --git a/drivers/net/wireless/rt2x00/rt2x00queue.c b/drivers/net/wireless/rt2x00/rt2x00queue.c
index d7752dbd2023..b8de9d2750e4 100644
--- a/drivers/net/wireless/rt2x00/rt2x00queue.c
+++ b/drivers/net/wireless/rt2x00/rt2x00queue.c
@@ -386,7 +386,7 @@ int rt2x00queue_write_tx_frame(struct data_queue *queue, struct sk_buff *skb)
 	u8 rate_idx, rate_flags;
 
 	if (unlikely(rt2x00queue_full(queue)))
-		return -EINVAL;
+		return -ENOBUFS;
 
 	if (test_and_set_bit(ENTRY_OWNER_DEVICE_DATA, &entry->flags)) {
 		ERROR(queue->rt2x00dev,
@@ -415,7 +415,7 @@ int rt2x00queue_write_tx_frame(struct data_queue *queue, struct sk_buff *skb)
 	tx_info = IEEE80211_SKB_CB(skb);
 	rate_idx = tx_info->control.rates[0].idx;
 	rate_flags = tx_info->control.rates[0].flags;
-	skbdesc = get_skb_frame_desc(entry->skb);
+	skbdesc = get_skb_frame_desc(skb);
 	memset(skbdesc, 0, sizeof(*skbdesc));
 	skbdesc->entry = entry;
 	skbdesc->tx_rate_idx = rate_idx;
@@ -427,20 +427,18 @@ int rt2x00queue_write_tx_frame(struct data_queue *queue, struct sk_buff *skb)
 	 * the frame so we can provide it to the driver seperately.
 	 */
 	if (test_bit(ENTRY_TXD_ENCRYPT, &txdesc.flags) &&
-	    !test_bit(ENTRY_TXD_ENCRYPT_IV, &txdesc.flags)) {
+	    !test_bit(ENTRY_TXD_ENCRYPT_IV, &txdesc.flags))
 		rt2x00crypto_tx_remove_iv(skb, iv_len);
-	}
 
 	/*
 	 * It could be possible that the queue was corrupted and this
-	 * call failed. Just drop the frame, we cannot rollback and pass
-	 * the frame to mac80211 because the skb->cb has now been tainted.
+	 * call failed. Since we always return NETDEV_TX_OK to mac80211,
+	 * this frame will simply be dropped.
 	 */
 	if (unlikely(queue->rt2x00dev->ops->lib->write_tx_data(entry))) {
 		clear_bit(ENTRY_OWNER_DEVICE_DATA, &entry->flags);
-		dev_kfree_skb_any(entry->skb);
 		entry->skb = NULL;
-		return 0;
+		return -EIO;
 	}
 
 	if (test_bit(DRIVER_REQUIRE_DMA, &queue->rt2x00dev->flags))