From: Geert Uytterhoeven Date: Thu, 20 Oct 2011 11:42:23 +0000 (+0200) Subject: fbdev/cirrusfb: Rewrite Zorro graphics card probing X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=0e0d13364b417a40266999c61671db0ef8690ad3;p=openwrt%2Fstaging%2Fblogic.git fbdev/cirrusfb: Rewrite Zorro graphics card probing As indicated by commit a7f4d00a82feb5b311f765bf9522bc55bee0684f ("zorro: Defer device_register() until all devices have been identified"), cirrusfb crashes if zorro_find_device() cannot find an expected device. Rewrite the Zorro device probe code to make it more robust, easier to understand, and more extensible. Other logical changes: - For cards that show up as 2 Zorro devices, autoprobe graphics memory sizes based on the size of the Zorro device containing the graphics memory. Acording to the NetBSD sources, this is safe. Signed-off-by: Geert Uytterhoeven Acked-by: Jeff Garzik Signed-off-by: Florian Tobias Schandinat --- diff --git a/drivers/video/cirrusfb.c b/drivers/video/cirrusfb.c index 6df7c54db0a3..357139ab7a0f 100644 --- a/drivers/video/cirrusfb.c +++ b/drivers/video/cirrusfb.c @@ -280,52 +280,63 @@ MODULE_DEVICE_TABLE(pci, cirrusfb_pci_table); #endif /* CONFIG_PCI */ #ifdef CONFIG_ZORRO -static const struct zorro_device_id cirrusfb_zorro_table[] = { +struct zorrocl { + enum cirrus_board type; /* Board type */ + u32 regoffset; /* Offset of registers in first Zorro device */ + u32 ramsize; /* Size of video RAM in first Zorro device */ + /* If zero, use autoprobe on RAM device */ + u32 ramoffset; /* Offset of video RAM in first Zorro device */ + zorro_id ramid; /* Zorro ID of RAM device */ +}; + +static const struct zorrocl zcl_sd64 __devinitconst = { + .type = BT_SD64, + .ramid = ZORRO_PROD_HELFRICH_SD64_RAM, +}; + +static const struct zorrocl zcl_piccolo __devinitconst = { + .type = BT_PICCOLO, + .ramid = ZORRO_PROD_HELFRICH_PICCOLO_RAM, +}; + +static const struct zorrocl zcl_picasso __devinitconst = { + .type = BT_PICASSO, + .ramid = ZORRO_PROD_VILLAGE_TRONIC_PICASSO_II_II_PLUS_RAM, +}; + +static const struct zorrocl zcl_spectrum __devinitconst = { + .type = BT_SPECTRUM, + .ramid = ZORRO_PROD_GVP_EGS_28_24_SPECTRUM_RAM, +}; + +static const struct zorrocl zcl_picasso4_z3 __devinitconst = { + .type = BT_PICASSO4, + .regoffset = 0x00600000, + .ramsize = 4 * MB_, + .ramoffset = 0x01000000, +}; + + +static const struct zorro_device_id cirrusfb_zorro_table[] __devinitconst = { { - .id = ZORRO_PROD_HELFRICH_SD64_RAM, - .driver_data = BT_SD64, + .id = ZORRO_PROD_HELFRICH_SD64_REG, + .driver_data = (unsigned long)&zcl_sd64, }, { - .id = ZORRO_PROD_HELFRICH_PICCOLO_RAM, - .driver_data = BT_PICCOLO, + .id = ZORRO_PROD_HELFRICH_PICCOLO_REG, + .driver_data = (unsigned long)&zcl_piccolo, }, { - .id = ZORRO_PROD_VILLAGE_TRONIC_PICASSO_II_II_PLUS_RAM, - .driver_data = BT_PICASSO, + .id = ZORRO_PROD_VILLAGE_TRONIC_PICASSO_II_II_PLUS_REG, + .driver_data = (unsigned long)&zcl_picasso, }, { - .id = ZORRO_PROD_GVP_EGS_28_24_SPECTRUM_RAM, - .driver_data = BT_SPECTRUM, + .id = ZORRO_PROD_GVP_EGS_28_24_SPECTRUM_REG, + .driver_data = (unsigned long)&zcl_spectrum, }, { .id = ZORRO_PROD_VILLAGE_TRONIC_PICASSO_IV_Z3, - .driver_data = BT_PICASSO4, + .driver_data = (unsigned long)&zcl_picasso4_z3, }, { 0 } }; MODULE_DEVICE_TABLE(zorro, cirrusfb_zorro_table); - -static const struct { - zorro_id id2; - unsigned long size; -} cirrusfb_zorro_table2[] = { - [BT_SD64] = { - .id2 = ZORRO_PROD_HELFRICH_SD64_REG, - .size = 0x400000 - }, - [BT_PICCOLO] = { - .id2 = ZORRO_PROD_HELFRICH_PICCOLO_REG, - .size = 0x200000 - }, - [BT_PICASSO] = { - .id2 = ZORRO_PROD_VILLAGE_TRONIC_PICASSO_II_II_PLUS_REG, - .size = 0x200000 - }, - [BT_SPECTRUM] = { - .id2 = ZORRO_PROD_GVP_EGS_28_24_SPECTRUM_REG, - .size = 0x200000 - }, - [BT_PICASSO4] = { - .id2 = 0, - .size = 0x400000 - } -}; #endif /* CONFIG_ZORRO */ #ifdef CIRRUSFB_DEBUG @@ -1956,16 +1967,12 @@ static void cirrusfb_zorro_unmap(struct fb_info *info) struct cirrusfb_info *cinfo = info->par; struct zorro_dev *zdev = to_zorro_dev(info->device); - zorro_release_device(zdev); - - if (cinfo->btype == BT_PICASSO4) { - cinfo->regbase -= 0x600000; - iounmap((void *)cinfo->regbase); + if (info->fix.smem_start > 16 * MB_) iounmap(info->screen_base); - } else { - if (zorro_resource_start(zdev) > 0x01000000) - iounmap(info->screen_base); - } + if (info->fix.mmio_start > 16 * MB_) + iounmap(cinfo->regbase); + + zorro_release_device(zdev); } #endif /* CONFIG_ZORRO */ @@ -2222,115 +2229,102 @@ static struct pci_driver cirrusfb_pci_driver = { static int __devinit cirrusfb_zorro_register(struct zorro_dev *z, const struct zorro_device_id *ent) { - struct cirrusfb_info *cinfo; struct fb_info *info; + int error; + const struct zorrocl *zcl; enum cirrus_board btype; - struct zorro_dev *z2 = NULL; - unsigned long board_addr, board_size, size; - int ret; - - btype = ent->driver_data; - if (cirrusfb_zorro_table2[btype].id2) - z2 = zorro_find_device(cirrusfb_zorro_table2[btype].id2, NULL); - size = cirrusfb_zorro_table2[btype].size; + unsigned long regbase, ramsize, rambase; + struct cirrusfb_info *cinfo; info = framebuffer_alloc(sizeof(struct cirrusfb_info), &z->dev); if (!info) { printk(KERN_ERR "cirrusfb: could not allocate memory\n"); - ret = -ENOMEM; - goto err_out; + return -ENOMEM; } - dev_info(info->device, "%s board detected\n", - cirrusfb_board_info[btype].name); - - cinfo = info->par; - cinfo->btype = btype; - - assert(z); - assert(btype != BT_NONE); + zcl = (const struct zorrocl *)ent->driver_data; + btype = zcl->type; + regbase = zorro_resource_start(z) + zcl->regoffset; + ramsize = zcl->ramsize; + if (ramsize) { + rambase = zorro_resource_start(z) + zcl->ramoffset; + } else { + struct zorro_dev *ram = zorro_find_device(zcl->ramid, NULL); + if (!ram || !zorro_resource_len(ram)) { + dev_err(info->device, "No video RAM found\n"); + error = -ENODEV; + goto err_release_fb; + } + rambase = zorro_resource_start(ram); + ramsize = zorro_resource_len(ram); + } - board_addr = zorro_resource_start(z); - board_size = zorro_resource_len(z); - info->screen_size = size; + dev_info(info->device, + "%s board detected, REG at 0x%lx, %lu MiB RAM at 0x%lx\n", + cirrusfb_board_info[btype].name, regbase, ramsize / MB_, + rambase); if (!zorro_request_device(z, "cirrusfb")) { - dev_err(info->device, "cannot reserve region 0x%lx, abort\n", - board_addr); - ret = -EBUSY; + dev_err(info->device, "Cannot reserve %pR\n", &z->resource); + error = -EBUSY; goto err_release_fb; } - ret = -EIO; - - if (btype == BT_PICASSO4) { - dev_info(info->device, " REG at $%lx\n", board_addr + 0x600000); - - /* To be precise, for the P4 this is not the */ - /* begin of the board, but the begin of RAM. */ - /* for P4, map in its address space in 2 chunks (### TEST! ) */ - /* (note the ugly hardcoded 16M number) */ - cinfo->regbase = ioremap(board_addr, 16777216); - if (!cinfo->regbase) - goto err_release_region; - - dev_dbg(info->device, "Virtual address for board set to: $%p\n", - cinfo->regbase); - cinfo->regbase += 0x600000; - info->fix.mmio_start = board_addr + 0x600000; - - info->fix.smem_start = board_addr + 16777216; - info->screen_base = ioremap(info->fix.smem_start, 16777216); - if (!info->screen_base) - goto err_unmap_regbase; - } else { - dev_info(info->device, " REG at $%lx\n", - (unsigned long) z2->resource.start); - - info->fix.smem_start = board_addr; - if (board_addr > 0x01000000) - info->screen_base = ioremap(board_addr, board_size); - else - info->screen_base = (caddr_t) ZTWO_VADDR(board_addr); - if (!info->screen_base) - goto err_release_region; + cinfo = info->par; + cinfo->btype = btype; - /* set address for REG area of board */ - cinfo->regbase = (caddr_t) ZTWO_VADDR(z2->resource.start); - info->fix.mmio_start = z2->resource.start; + info->fix.mmio_start = regbase; + cinfo->regbase = regbase > 16 * MB_ ? ioremap(regbase, 64 * 1024) + : (caddr_t)ZTWO_VADDR(regbase); + if (!cinfo->regbase) { + dev_err(info->device, "Cannot map registers\n"); + error = -EIO; + goto err_release_dev; + } - dev_dbg(info->device, "Virtual address for board set to: $%p\n", - cinfo->regbase); + info->fix.smem_start = rambase; + info->screen_size = ramsize; + info->screen_base = rambase > 16 * MB_ ? ioremap(rambase, ramsize) + : (caddr_t)ZTWO_VADDR(rambase); + if (!info->screen_base) { + dev_err(info->device, "Cannot map video RAM\n"); + error = -EIO; + goto err_unmap_reg; } + cinfo->unmap = cirrusfb_zorro_unmap; dev_info(info->device, - "Cirrus Logic chipset on Zorro bus, RAM (%lu MB) at $%lx\n", - board_size / MB_, board_addr); - - zorro_set_drvdata(z, info); + "Cirrus Logic chipset on Zorro bus, RAM (%lu MiB) at 0x%lx\n", + ramsize / MB_, rambase); /* MCLK select etc. */ if (cirrusfb_board_info[btype].init_sr1f) vga_wseq(cinfo->regbase, CL_SEQR1F, cirrusfb_board_info[btype].sr1f); - ret = cirrusfb_register(info); - if (!ret) - return 0; + error = cirrusfb_register(info); + if (error) { + dev_err(info->device, "Failed to register device, error %d\n", + error); + goto err_unmap_ram; + } - if (btype == BT_PICASSO4 || board_addr > 0x01000000) + zorro_set_drvdata(z, info); + return 0; + +err_unmap_ram: + if (rambase > 16 * MB_) iounmap(info->screen_base); -err_unmap_regbase: - if (btype == BT_PICASSO4) - iounmap(cinfo->regbase - 0x600000); -err_release_region: - release_region(board_addr, board_size); +err_unmap_reg: + if (regbase > 16 * MB_) + iounmap(cinfo->regbase); +err_release_dev: + zorro_release_device(z); err_release_fb: framebuffer_release(info); -err_out: - return ret; + return error; } void __devexit cirrusfb_zorro_unregister(struct zorro_dev *z) @@ -2338,6 +2332,7 @@ void __devexit cirrusfb_zorro_unregister(struct zorro_dev *z) struct fb_info *info = zorro_get_drvdata(z); cirrusfb_cleanup(info); + zorro_set_drvdata(z, NULL); } static struct zorro_driver cirrusfb_zorro_driver = {