From: Zoltan HERPAI Date: Thu, 5 May 2022 06:47:27 +0000 (+0200) Subject: kirkwood: add support for Netgear Stora (MS2000/2110) NAS X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=0dfc0495fc4194eff2379293c90863ac0161fdb1;p=openwrt%2Fstaging%2Fldir.git kirkwood: add support for Netgear Stora (MS2000/2110) NAS Dual-slot NAS based on Marvell Kirkwood. Specifications: - Marvell 88F6281 @1GHz - 128Mb RAM - 256Mb NAND - 1x GbE LAN (Marvell 88E1116) - 1x USB 2.0 - 2x SATA - PCF8563 RTC - LM75 sensor - TC654 PWM fan controller - Serial on J2 (115200,8n1) - Newer bootROM so kwboot-ing via serial is possible Installation: 1. Serial console - Connect your levelshifter to the serial console on J2 (refer to the wiki page for pinout) 2. Update u-boot - Download the u-boot.kwb image for the device - Powercycle the NAS - Run "kwboot -b ./u-boot.kwb /dev/ttyUSB0 -p" - Connect to the serial console with minicom - tftp 0x0800000 netgear_stora-u-boot.kwb - nand erase 0x0 100000 - nand write 0x0800000 0x0 0x100000 - reset 3. Install OpenWrt - Boot up the initramfs image - tftpboot 0x800000 openwrt-kirkwood-netgear_stora-initramfs-uImage; bootm 0x800000 - Download the sysupgrade image and perform sysupgrade The fan is controlled in 3 stages by a script running every minute from cron, measuring the CPU temperature. Snippets taken from bodhi Signed-off-by: Zoltan HERPAI --- diff --git a/package/boot/uboot-kirkwood/Makefile b/package/boot/uboot-kirkwood/Makefile index 7f9ae4e151..92a814ac4f 100644 --- a/package/boot/uboot-kirkwood/Makefile +++ b/package/boot/uboot-kirkwood/Makefile @@ -65,6 +65,11 @@ define U-Boot/nas220 BUILD_DEVICES:=seagate_blackarmor-nas220 endef +define U-Boot/netgear_ms2110 + NAME:=Netgear Stora (MS2000/2110) + BUILD_DEVICES:=netgear_stora +endef + define U-Boot/nsa310 NAME:=Zyxel NSA310 BUILD_DEVICES:=zyxel_nsa310b @@ -107,6 +112,7 @@ UBOOT_TARGETS := \ iconnect iconnect_second_stage \ l-50 \ nas220 \ + netgear_ms2110 \ nsa310 \ nsa310s \ nsa325 \ diff --git a/package/boot/uboot-kirkwood/patches/180-netgear-stora.patch b/package/boot/uboot-kirkwood/patches/180-netgear-stora.patch new file mode 100644 index 0000000000..5eed89d5e6 --- /dev/null +++ b/package/boot/uboot-kirkwood/patches/180-netgear-stora.patch @@ -0,0 +1,648 @@ +diff -ruN u-boot-2020.04.old/arch/arm/mach-kirkwood/Kconfig u-boot-2020.04/arch/arm/mach-kirkwood/Kconfig +--- u-boot-2020.04.old/arch/arm/mach-kirkwood/Kconfig 2020-07-09 00:46:15.000000000 +0200 ++++ u-boot-2020.04/arch/arm/mach-kirkwood/Kconfig 2020-07-09 01:07:00.309219477 +0200 +@@ -44,6 +44,9 @@ + config TARGET_NETSPACE_V2 + bool "LaCie netspace_v2 Board" + ++config TARGET_NETGEAR_MS2110 ++ bool "Netgear MS2110 Board" ++ + config TARGET_IB62X0 + bool "ib62x0 Board" + +@@ -92,6 +95,7 @@ + source "board/keymile/Kconfig" + source "board/LaCie/net2big_v2/Kconfig" + source "board/LaCie/netspace_v2/Kconfig" ++source "board/Marvell/netgear_ms2110/Kconfig" + source "board/raidsonic/ib62x0/Kconfig" + source "board/Seagate/dockstar/Kconfig" + source "board/Seagate/goflexhome/Kconfig" +diff -ruN u-boot-2020.04.old/board/Marvell/netgear_ms2110/Kconfig u-boot-2020.04/board/Marvell/netgear_ms2110/Kconfig +--- u-boot-2020.04.old/board/Marvell/netgear_ms2110/Kconfig 1970-01-01 01:00:00.000000000 +0100 ++++ u-boot-2020.04/board/Marvell/netgear_ms2110/Kconfig 2020-07-09 00:59:29.000000000 +0200 +@@ -0,0 +1,12 @@ ++if TARGET_NETGEAR_MS2110 ++ ++config SYS_BOARD ++ default "netgear_ms2110" ++ ++config SYS_VENDOR ++ default "Marvell" ++ ++config SYS_CONFIG_NAME ++ default "netgear_ms2110" ++ ++endif +diff -ruN u-boot-2020.04.old/board/Marvell/netgear_ms2110/kwbimage.cfg u-boot-2020.04/board/Marvell/netgear_ms2110/kwbimage.cfg +--- u-boot-2020.04.old/board/Marvell/netgear_ms2110/kwbimage.cfg 1970-01-01 01:00:00.000000000 +0100 ++++ u-boot-2020.04/board/Marvell/netgear_ms2110/kwbimage.cfg 2020-07-09 00:59:29.000000000 +0200 +@@ -0,0 +1,167 @@ ++# ++# (C) Copyright 2009 ++# Marvell Semiconductor ++# Written-by: Prafulla Wadaskar ++# ++# See file CREDITS for list of people who contributed to this ++# project. ++# ++# This program is free software; you can redistribute it and/or ++# modify it under the terms of the GNU General Public License as ++# published by the Free Software Foundation; either version 2 of ++# the License, or (at your option) any later version. ++# ++# This program is distributed in the hope that it will be useful, ++# but WITHOUT ANY WARRANTY; without even the implied warranty of ++# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++# GNU General Public License for more details. ++# ++# You should have received a copy of the GNU General Public License ++# along with this program; if not, write to the Free Software ++# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, ++# MA 02110-1301 USA ++# ++# Refer docs/README.kwimage for more details about how-to configure ++# and create kirkwood boot image ++# ++ ++# Boot Media configurations ++BOOT_FROM nand ++NAND_ECC_MODE default ++NAND_PAGE_SIZE 0x0800 ++ ++# SOC registers configuration using bootrom header extension ++# Maximum KWBIMAGE_MAX_CONFIG configurations allowed ++ ++# Configure RGMII-0 interface pad voltage to 1.8V ++DATA 0xFFD100e0 0x1b1b1b9b ++ ++#Dram initalization for SINGLE x16 CL=5 @ 400MHz ++DATA 0xFFD01400 0x43000c30 # DDR Configuration register ++# bit13-0: 0xc30 (3120 DDR2 clks refresh rate) ++# bit23-14: zero ++# bit24: 1= enable exit self refresh mode on DDR access ++# bit25: 1 required ++# bit29-26: zero ++# bit31-30: 01 ++ ++DATA 0xFFD01404 0x37543000 # DDR Controller Control Low ++# bit 4: 0=addr/cmd in smame cycle ++# bit 5: 0=clk is driven during self refresh, we don't care for APX ++# bit 6: 0=use recommended falling edge of clk for addr/cmd ++# bit14: 0=input buffer always powered up ++# bit18: 1=cpu lock transaction enabled ++# bit23-20: 5=recommended value for CL=5 and STARTBURST_DEL disabled bit31=0 ++# bit27-24: 7= CL+2, STARTBURST sample stages, for freqs 400MHz, unbuffered DIMM ++# bit30-28: 3 required ++# bit31: 0=no additional STARTBURST delay ++ ++DATA 0xFFD01408 0x22125451 # DDR Timing (Low) (active cycles value +1) ++# bit3-0: TRAS lsbs ++# bit7-4: TRCD ++# bit11- 8: TRP ++# bit15-12: TWR ++# bit19-16: TWTR ++# bit20: TRAS msb ++# bit23-21: 0x0 ++# bit27-24: TRRD ++# bit31-28: TRTP ++ ++DATA 0xFFD0140C 0x00000833 # DDR Timing (High) ++# bit6-0: TRFC ++# bit8-7: TR2R ++# bit10-9: TR2W ++# bit12-11: TW2W ++# bit31-13: zero required ++ ++DATA 0xFFD01410 0x00000099 # DDR Address Control ++# bit1-0: 00, Cs0width=x8 ++# bit3-2: 11, Cs0size=1Gb ++# bit5-4: 00, Cs1width=x8 ++# bit7-6: 11, Cs1size=1Gb ++# bit9-8: 00, Cs2width=nonexistent ++# bit11-10: 00, Cs2size =nonexistent ++# bit13-12: 00, Cs3width=nonexistent ++# bit15-14: 00, Cs3size =nonexistent ++# bit16: 0, Cs0AddrSel ++# bit17: 0, Cs1AddrSel ++# bit18: 0, Cs2AddrSel ++# bit19: 0, Cs3AddrSel ++# bit31-20: 0 required ++ ++DATA 0xFFD01414 0x00000000 # DDR Open Pages Control ++# bit0: 0, OpenPage enabled ++# bit31-1: 0 required ++ ++DATA 0xFFD01418 0x00000000 # DDR Operation ++# bit3-0: 0x0, DDR cmd ++# bit31-4: 0 required ++ ++DATA 0xFFD0141C 0x00000C52 # DDR Mode ++# bit2-0: 2, BurstLen=2 required ++# bit3: 0, BurstType=0 required ++# bit6-4: 4, CL=5 ++# bit7: 0, TestMode=0 normal ++# bit8: 0, DLL reset=0 normal ++# bit11-9: 6, auto-precharge write recovery ???????????? ++# bit12: 0, PD must be zero ++# bit31-13: 0 required ++ ++DATA 0xFFD01420 0x00000004 # DDR Extended Mode ++# bit0: 0, DDR DLL enabled ++# bit1: 0, DDR drive strenght normal ++# bit2: 1, DDR ODT control lsd (disabled) ++# bit5-3: 000, required ++# bit6: 0, DDR ODT control msb, (disabled) ++# bit9-7: 000, required ++# bit10: 0, differential DQS enabled ++# bit11: 0, required ++# bit12: 0, DDR output buffer enabled ++# bit31-13: 0 required ++ ++DATA 0xFFD01424 0x0000F17F # DDR Controller Control High ++# bit2-0: 111, required ++# bit3 : 1 , MBUS Burst Chop disabled ++# bit6-4: 111, required ++# bit7 : 0 ++# bit8 : 1 , add writepath sample stage, must be 1 for DDR freq >= 300MHz ++# bit9 : 0 , no half clock cycle addition to dataout ++# bit10 : 0 , 1/4 clock cycle skew enabled for addr/ctl signals ++# bit11 : 0 , 1/4 clock cycle skew disabled for write mesh ++# bit15-12: 1111 required ++# bit31-16: 0 required ++ ++DATA 0xFFD01428 0x00085520 # DDR2 ODT Read Timing (default values) ++DATA 0xFFD0147C 0x00008552 # DDR2 ODT Write Timing (default values) ++ ++DATA 0xFFD01500 0x00000000 # CS[0]n Base address to 0x0 ++DATA 0xFFD01504 0x03FFFFF1 # CS[0]n Size ++# bit0: 1, Window enabled ++# bit1: 0, Write Protect disabled ++# bit3-2: 00, CS0 hit selected ++# bit23-4: ones, required ++# bit31-24: 0x0F, Size (i.e. 256MB) ++ ++DATA 0xFFD01508 0x04000000 # CS[1]n Base address to 256Mb ++DATA 0xFFD0150C 0x03FFFFF5 # CS[1]n Size 256Mb Window enabled for CS1 ++ ++DATA 0xFFD01514 0x00000000 # CS[2]n Size, window disabled ++DATA 0xFFD0151C 0x00000000 # CS[3]n Size, window disabled ++ ++DATA 0xFFD01494 0x00120012 # DDR ODT Control (Low) ++# bit3-0: 2, ODT0Rd, MODT[0] asserted during read from DRAM CS1 ++# bit7-4: 1, ODT0Rd, MODT[0] asserted during read from DRAM CS0 ++# bit19-16:2, ODT0Wr, MODT[0] asserted during write to DRAM CS1 ++# bit23-20:1, ODT0Wr, MODT[0] asserted during write to DRAM CS0 ++ ++DATA 0xFFD01498 0x00000000 # DDR ODT Control (High) ++# bit1-0: 00, ODT0 controlled by ODT Control (low) register above ++# bit3-2: 01, ODT1 active NEVER! ++# bit31-4: zero, required ++ ++DATA 0xFFD0149C 0x0000E40F # CPU ODT Control ++DATA 0xFFD01480 0x00000001 # DDR Initialization Control ++#bit0=1, enable DDR init upon this register write ++ ++# End of Header extension ++DATA 0x0 0x0 +diff -ruN u-boot-2020.04.old/board/Marvell/netgear_ms2110/MAINTAINERS u-boot-2020.04/board/Marvell/netgear_ms2110/MAINTAINERS +--- u-boot-2020.04.old/board/Marvell/netgear_ms2110/MAINTAINERS 1970-01-01 01:00:00.000000000 +0100 ++++ u-boot-2020.04/board/Marvell/netgear_ms2110/MAINTAINERS 2020-07-09 00:59:29.000000000 +0200 +@@ -0,0 +1,6 @@ ++NETGEAR_MS2110 BOARD ++M: bodhi ++S: Maintained ++F: board/Marvell/netgear_ms2110 ++F: include/configs/netgear_ms2110.h ++F: configs/netgear_ms2110_defconfig +diff -ruN u-boot-2020.04.old/board/Marvell/netgear_ms2110/Makefile u-boot-2020.04/board/Marvell/netgear_ms2110/Makefile +--- u-boot-2020.04.old/board/Marvell/netgear_ms2110/Makefile 1970-01-01 01:00:00.000000000 +0100 ++++ u-boot-2020.04/board/Marvell/netgear_ms2110/Makefile 2020-07-09 00:59:29.000000000 +0200 +@@ -0,0 +1,13 @@ ++# ++# (C) Copyright 2014 bodhi ++# ++# Based on ++# (C) Copyright 2009 ++# Marvell Semiconductor ++# Written-by: Prafulla Wadaskar ++# ++# SPDX-License-Identifier: GPL-2.0+ ++# ++ ++obj-y := netgear_ms2110.o ++ +diff -ruN u-boot-2020.04.old/board/Marvell/netgear_ms2110/netgear_ms2110.c u-boot-2020.04/board/Marvell/netgear_ms2110/netgear_ms2110.c +--- u-boot-2020.04.old/board/Marvell/netgear_ms2110/netgear_ms2110.c 1970-01-01 01:00:00.000000000 +0100 ++++ u-boot-2020.04/board/Marvell/netgear_ms2110/netgear_ms2110.c 2020-07-09 00:59:29.000000000 +0200 +@@ -0,0 +1,151 @@ ++/* ++ * Copyright (C) 2014-2017 bodhi ++ * ++ * Based on Kirkwood support: ++ * (C) Copyright 2009 ++ * Marvell Semiconductor ++ * Written-by: Prafulla Wadaskar ++ * ++ * See file CREDITS for list of people who contributed to this ++ * project. ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License as ++ * published by the Free Software Foundation; either version 2 of ++ * the License, or (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, ++ * MA 02110-1301 USA ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++#include "netgear_ms2110.h" ++#include ++ ++DECLARE_GLOBAL_DATA_PTR; ++int board_early_init_f(void) ++{ ++ /* ++ * default gpio configuration ++ * There are maximum 64 gpios controlled through 2 sets of registers ++ * the below configuration configures mainly initial LED status ++ */ ++ mvebu_config_gpio(NETGEAR_MS2110_OE_VAL_LOW, ++ NETGEAR_MS2110_OE_VAL_HIGH, ++ NETGEAR_MS2110_OE_LOW, NETGEAR_MS2110_OE_HIGH); ++ ++ /* Multi-Purpose Pins Functionality configuration */ ++ u32 kwmpp_config[] = { ++ MPP0_NF_IO2, ++ MPP1_NF_IO3, ++ MPP2_NF_IO4, ++ MPP3_NF_IO5, ++ MPP4_NF_IO6, ++ MPP5_NF_IO7, ++ MPP6_SYSRST_OUTn, ++ MPP7_SPI_SCn, ++ MPP8_TW_SDA, ++ MPP9_TW_SCK, ++ MPP10_UART0_TXD, ++ MPP11_UART0_RXD, ++ MPP12_SD_CLK, ++ MPP13_SD_CMD, ++ MPP14_SD_D0, ++ MPP15_SD_D1, ++ MPP16_SD_D2, ++ MPP17_SD_D3, ++ MPP18_NF_IO0, ++ MPP19_NF_IO1, ++ MPP20_SATA1_ACTn, ++ MPP21_SATA0_ACTn, ++ MPP22_GPIO, ++ MPP23_GPIO, ++ MPP24_GE1_4, ++ MPP25_GE1_5, ++ MPP26_GE1_6, ++ MPP27_GE1_7, ++ MPP28_GPIO, ++ MPP29_GPIO, ++ MPP30_GPIO, ++ MPP31_GPIO, ++ MPP32_GPIO, ++ MPP33_GE1_13, ++ MPP34_SATA1_ACTn, ++ MPP35_GPIO, ++ MPP36_GPIO, ++ MPP37_GPIO, ++ MPP38_GPIO, ++ MPP39_GPIO, ++ MPP40_GPIO, ++ MPP41_GPIO, ++ MPP42_GPIO, ++ MPP43_GPIO, ++ MPP44_GPIO, ++ MPP45_TDM_PCLK, ++ MPP46_TDM_FS, ++ MPP47_TDM_DRX, ++ MPP48_TDM_DTX, ++ MPP49_GPIO, ++ 0 ++ }; ++ kirkwood_mpp_conf(kwmpp_config, NULL); ++ return 0; ++} ++ ++int board_init(void) ++{ /* ++ * arch number of board ++ */ ++ gd->bd->bi_arch_number = MACH_TYPE_NETGEAR_MS2110; ++ ++ /* adress of boot parameters */ ++ gd->bd->bi_boot_params = mvebu_sdram_bar(0) + 0x100; ++ ++ return 0; ++} ++#ifdef CONFIG_RESET_PHY_R ++/* Configure and enable MV88E1116 PHY */ ++void reset_phy(void) ++{ ++ u16 reg; ++ u16 devadr; ++ char *name = "egiga0"; ++ ++ if (miiphy_set_current_dev(name)) ++ return; ++ ++ /* command to read PHY dev address */ ++ if (miiphy_read(name, 0xEE, 0xEE, (u16 *) &devadr)) { ++ printf("Err..%s could not read PHY dev address\n", ++ __FUNCTION__); ++ return; ++ } ++ ++ /* ++ * Enable RGMII delay on Tx and Rx for CPU port ++ * Ref: sec 4.7.2 of chip datasheet ++ */ ++ miiphy_write(name, devadr, MV88E1116_PGADR_REG, 2); ++ miiphy_read(name, devadr, MV88E1116_MAC_CTRL_REG, ®); ++ reg |= (MV88E1116_RGMII_RXTM_CTRL | MV88E1116_RGMII_TXTM_CTRL); ++ miiphy_write(name, devadr, MV88E1116_MAC_CTRL_REG, reg); ++ miiphy_write(name, devadr, MV88E1116_PGADR_REG, 0); ++ ++ /* reset the phy */ ++ miiphy_reset(name, devadr); ++ ++ printf("88E1116 Initialized on %s\n", name); ++} ++#endif /* CONFIG_RESET_PHY_R */ ++ +diff -ruN u-boot-2020.04.old/board/Marvell/netgear_ms2110/netgear_ms2110.h u-boot-2020.04/board/Marvell/netgear_ms2110/netgear_ms2110.h +--- u-boot-2020.04.old/board/Marvell/netgear_ms2110/netgear_ms2110.h 1970-01-01 01:00:00.000000000 +0100 ++++ u-boot-2020.04/board/Marvell/netgear_ms2110/netgear_ms2110.h 2020-07-09 00:59:29.000000000 +0200 +@@ -0,0 +1,41 @@ ++/* ++ * (C) Copyright 2009 ++ * Marvell Semiconductor ++ * Written-by: Prafulla Wadaskar ++ * ++ * See file CREDITS for list of people who contributed to this ++ * project. ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License as ++ * published by the Free Software Foundation; either version 2 of ++ * the License, or (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, ++ * MA 02110-1301 USA ++ */ ++ ++#ifndef __NETGEAR_MS2110_H ++#define __NETGEAR_MS2110_H ++ ++#define NETGEAR_MS2110_OE_LOW (~(1 << 7)) ++#define NETGEAR_MS2110_OE_HIGH (~(1 << 2 | 1 << 12)) ++#define NETGEAR_MS2110_OE_VAL_LOW (0) ++#define NETGEAR_MS2110_OE_VAL_HIGH (1 << 12) ++ ++/* PHY related */ ++#define MV88E1116_LED_FCTRL_REG 10 ++#define MV88E1116_CPRSP_CR3_REG 21 ++#define MV88E1116_MAC_CTRL_REG 21 ++#define MV88E1116_PGADR_REG 22 ++#define MV88E1116_RGMII_TXTM_CTRL (1 << 4) ++#define MV88E1116_RGMII_RXTM_CTRL (1 << 5) ++ ++#endif /* __NETGEAR_MS2110_H */ +diff -ruN a/configs/netgear_ms2110_defconfig b/configs/netgear_ms2110_defconfig +--- a/configs/netgear_ms2110_defconfig 1970-01-01 01:00:00.000000000 +0100 ++++ b/configs/netgear_ms2110_defconfig 2020-07-14 17:59:18.000000000 +0200 +@@ -0,0 +1,50 @@ ++CONFIG_ARM=y ++CONFIG_KIRKWOOD=y ++CONFIG_SYS_DCACHE_OFF=y ++CONFIG_ARCH_CPU_INIT=y ++CONFIG_TARGET_NETGEAR_MS2110=y ++CONFIG_IDENT_STRING="\nNetgear Stora MS2110" ++CONFIG_SYS_PROMPT="Stora> " ++CONFIG_HUSH_PARSER=y ++CONFIG_SYS_TEXT_BASE=0x600000 ++# CONFIG_DISPLAY_BOARDINFO is not set ++# CONFIG_CMD_IMLS is not set ++# CONFIG_CMD_FLASH is not set ++CONFIG_CMD_IDE=y ++CONFIG_MVGBE=y ++CONFIG_MII=y ++CONFIG_SYS_NS16550=y ++CONFIG_OF_LIBFDT=y ++CONFIG_CMD_FDT=y ++CONFIG_CMD_BOOTZ=y ++CONFIG_CMD_SETEXPR=y ++CONFIG_CMD_DATE=y ++CONFIG_CMD_DHCP=y ++CONFIG_CMD_MII=y ++CONFIG_CMD_PING=y ++CONFIG_CMD_EXT2=y ++CONFIG_CMD_EXT4=y ++CONFIG_CMD_FAT=y ++CONFIG_CMD_JFFS2=y ++CONFIG_CMD_USB=y ++CONFIG_ISO_PARTITION=y ++CONFIG_EFI_PARTITION=y ++# CONFIG_MMC is not set ++CONFIG_MTD=y ++CONFIG_MTD_RAW_NAND=y ++CONFIG_MTDPARTS_DEFAULT="mtdparts=orion_nand:0xe0000@0x0(uboot),0x20000@0xe0000(uboot_env),-@0x100000(ubi)" ++CONFIG_CMD_MTDPARTS=y ++CONFIG_CMD_NAND=y ++CONFIG_ENV_IS_IN_NAND=y ++CONFIG_ENV_SIZE=0x20000 ++CONFIG_ENV_ADDR=0xe0000 ++CONFIG_ENV_OFFSET=0xe0000 ++CONFIG_ENV_SECT_SIZE=0x20000 ++CONFIG_CMD_UBI=y ++CONFIG_USB=y ++CONFIG_USB_EHCI_HCD=y ++CONFIG_USB_STORAGE=y ++CONFIG_BLK=y ++CONFIG_MVSATA_IDE=y ++CONFIG_DM_RTC=y ++CONFIG_RTC_MV=y +diff -ruN a/include/configs/netgear_ms2110.h b/include/configs/netgear_ms2110.h +--- a/include/configs/netgear_ms2110.h 1970-01-01 01:00:00.000000000 +0100 ++++ b/include/configs/netgear_ms2110.h 2020-07-14 17:49:15.000000000 +0200 +@@ -0,0 +1,155 @@ ++/* ++ * (C) Copyright 2014-2017 bodhi ++ * (C) Copyright 2020 Zoltan HERPAI ++ * ++ * Based on Kirkwood support: ++ * (C) Copyright 2009 ++ * Marvell Semiconductor ++ * Written-by: Prafulla Wadaskar ++ * ++ * See file CREDITS for list of people who contributed to this ++ * project. ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License as ++ * published by the Free Software Foundation; either version 2 of ++ * the License, or (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, ++ * MA 02110-1301 USA ++ */ ++ ++#ifndef _CONFIG_NGMS2110_H ++#define _CONFIG_NGMS2110_H ++ ++/* ++ * High Level Configuration Options (easy to change) ++ */ ++#define CONFIG_MARVELL 1 ++#define CONFIG_ARM926EJS 1 /* Basic Architecture */ ++#define CONFIG_FEROCEON_88FR131 1 /* CPU Core subversion */ ++#define CONFIG_KIRKWOOD 1 /* SOC Family Name */ ++#define CONFIG_KW88F6281 1 /* SOC Name */ ++#define CONFIG_MACH_NETGEAR_MS2110 /* Machine type */ ++#define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */ ++ ++/* ++ * Commands configuration ++ */ ++#define CONFIG_SYS_NO_FLASH /* Declare no flash (NOR/SPI) */ ++#define CONFIG_SYS_MVFS /* Picks up Filesystem from mv-common.h */ ++#define CONFIG_CMD_ENV ++#define CONFIG_PREBOOT ++#define CONFIG_SYS_HUSH_PARSER ++#define CONFIG_SYS_PROMPT_HUSH_PS2 "> " ++ ++/* #define CONFIG_CMD_AUTOSCRIPT */ ++ ++/* ++ * mv-common.h should be defined after CMD configs since it used them ++ * to enable certain macros ++ */ ++#include "mv-common.h" ++ ++/* Remove or override few declarations from mv-common.h */ ++//#undef CONFIG_SYS_PROMPT /* previously defined in mv-common.h */ ++//#define CONFIG_SYS_PROMPT "Netgear Stora> " ++ ++/* ++ * NAND configuration ++ */ ++#ifdef CONFIG_CMD_NAND ++#define CONFIG_NAND_KIRKWOOD ++#define CONFIG_SYS_MAX_NAND_DEVICE 1 ++#define NAND_MAX_CHIPS 1 ++#define CONFIG_SYS_NAND_BASE 0xD8000000 /* KW_DEFADR_NANDF */ ++#define NAND_ALLOW_ERASE_ALL 1 ++#endif ++ ++/* ++ * Default environment variables ++*/ ++#define CONFIG_BOOTCOMMAND \ ++ "setenv bootargs ${console} ${mtdparts} ${bootargs_root}; " \ ++ "ubi part ubi; " \ ++ "ubifsmount ubi:rootfs; " \ ++ "ubi read 0x800000 kernel; " \ ++ "bootm 0x800000" ++ ++#define CONFIG_EXTRA_ENV_SETTINGS \ ++ "arcNumber=2743\0" \ ++ "console=console=ttyS0,115200\0" \ ++ "ethact=egiga0\0" \ ++ "ethaddr=52:3b:20:9c:11:51\0" \ ++ "ipaddr=192.168.0.231\0" \ ++ "mtdids=nand0=orion_nand\0" \ ++ "mtdparts="CONFIG_MTDPARTS_DEFAULT "\0" \ ++ "serverip=192.168.0.220\0" \ ++ "bootargs_root=\0" ++ ++/* size in bytes reserved for initial data */ ++#define CONFIG_SYS_GBL_DATA_SIZE 128 ++ ++/* ++ * Other required minimal configurations ++ */ ++#define CONFIG_STACKSIZE 0x00100000 /* regular stack- 1M */ ++ ++/* ++ * Ethernet Driver configuration ++ */ ++#ifdef CONFIG_CMD_NET ++#define CONFIG_NETCONSOLE /* include NetConsole support */ ++#define CONFIG_NET_MULTI /* specify more that one ports available */ ++#define CONFIG_KIRKWOOD_EGIGA_PORTS {1,0} /* enable first port */ ++#define CONFIG_MV88E61XX_MULTICHIP_ADRMODE ++#define CONFIG_DIS_AUTO_NEG_SPEED_GMII /*Disable Auto speed negociation */ ++#define CONFIG_PHY_SPEED _1000BASET /*Force PHYspeed to 1GBPs */ ++#define CONFIG_MVGBE_PORTS {1, 0} /* enable port 0 only */ ++#define CONFIG_PHY_BASE_ADR 0x0A ++#define CONFIG_RESET_PHY_R /* use reset_phy() to init PHY */ ++#endif /* CONFIG_CMD_NET */ ++ ++/* ++ * USB/EHCI ++ */ ++#ifdef CONFIG_CMD_USB ++#define CONFIG_USB_EHCI /* Enable EHCI USB support */ ++#define CONFIG_USB_EHCI_KIRKWOOD /* on Kirkwood platform */ ++#define CONFIG_EHCI_IS_TDI ++#define CONFIG_SUPPORT_VFAT ++#endif /* CONFIG_CMD_USB */ ++ ++/* ++ * File system ++ */ ++#define CONFIG_JFFS2_NAND ++#define CONFIG_JFFS2_LZO ++#define CONFIG_MTD_DEVICE /* needed for mtdparts commands */ ++ ++/* ++ * SATA ++ */ ++ ++#ifdef CONFIG_MVSATA_IDE ++#define CONFIG_SYS_ATA_IDE0_OFFSET MV_SATA_PORT0_OFFSET ++#define CONFIG_SYS_ATA_IDE1_OFFSET MV_SATA_PORT1_OFFSET ++#endif ++ ++/* ++ * Date Time ++ * */ ++#ifdef CONFIG_CMD_DATE ++#define CONFIG_RTC_MV ++#define CONFIG_CMD_SNTP ++#define CONFIG_CMD_DNS ++#endif /* CONFIG_CMD_DATE */ ++ ++#endif /* _CONFIG_NGMS2110_H */ diff --git a/target/linux/kirkwood/base-files/etc/board.d/02_network b/target/linux/kirkwood/base-files/etc/board.d/02_network index 15f75df6a8..3ed2fa94b0 100644 --- a/target/linux/kirkwood/base-files/etc/board.d/02_network +++ b/target/linux/kirkwood/base-files/etc/board.d/02_network @@ -24,6 +24,7 @@ kirkwood_setup_interfaces() iom,ix2-200|\ iptime,nas1|\ netgear,readynas-duo-v2|\ + netgear,stora|\ raidsonic,ib-nas62x0|\ seagate,blackarmor-nas220|\ seagate,dockstar|\ diff --git a/target/linux/kirkwood/base-files/etc/uci-defaults/04_storafan b/target/linux/kirkwood/base-files/etc/uci-defaults/04_storafan new file mode 100644 index 0000000000..cdf44afa14 --- /dev/null +++ b/target/linux/kirkwood/base-files/etc/uci-defaults/04_storafan @@ -0,0 +1,22 @@ +# +# Copyright (C) 2021 OpenWrt.org +# + +. /lib/functions.sh + +board=$(board_name) + +case "$board" in +netgear,stora) + # Set fan script execution in crontab + grep -s -q fan_ctrl.sh /etc/crontabs/root && exit 0 + + echo "# stora fan script runs every 5 minutes" >> /etc/crontabs/root + echo "*/5 * * * * /sbin/fan_ctrl.sh" >> /etc/crontabs/root + + # Execute one time after initial flash (instead of waiting 5 min for cron) + /sbin/fan_ctrl.sh + ;; +esac + +exit 0 diff --git a/target/linux/kirkwood/base-files/sbin/fan_ctrl.sh b/target/linux/kirkwood/base-files/sbin/fan_ctrl.sh new file mode 100755 index 0000000000..bce8700736 --- /dev/null +++ b/target/linux/kirkwood/base-files/sbin/fan_ctrl.sh @@ -0,0 +1,23 @@ +#!/bin/sh + +CPU_TEMP=$(cut -c1-2 /sys/devices/platform/ocp@f1000000/f1011000.i2c/i2c-0/0-0048/hwmon/hwmon?/temp1_input) + +CPU_LOW=45 +CPU_MID=50 +CPU_HIGH=55 + +if [ ! -e /sys/devices/platform/ocp@f1000000/f1011000.i2c/i2c-0/0-001b/hwmon/hwmon?/pwm1 ]; then + exit 0 +else + FAN_CTRL=$(ls /sys/devices/platform/ocp@f1000000/f1011000.i2c/i2c-0/0-001b/hwmon/hwmon?/pwm1) +fi + +if [ "$CPU_TEMP" -ge "$CPU_HIGH" ]; then + echo "255" > $FAN_CTRL +elif [ "$CPU_TEMP" -ge "$CPU_MID" ]; then + echo "100" > $FAN_CTRL +elif [ "$CPU_TEMP" -ge "$CPU_LOW" ]; then + echo "50" > $FAN_CTRL +else + echo "0" > $FAN_CTRL +fi diff --git a/target/linux/kirkwood/files/arch/arm/boot/dts/kirkwood-stora.dts b/target/linux/kirkwood/files/arch/arm/boot/dts/kirkwood-stora.dts new file mode 100644 index 0000000000..577c009144 --- /dev/null +++ b/target/linux/kirkwood/files/arch/arm/boot/dts/kirkwood-stora.dts @@ -0,0 +1,227 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Device Tree file for NETGEAR Stora (MS2000/2110) + * + * Copyright (C) 2013, Arnaud EBALARD + * Copyright (C) 2021, Zoltan HERPAI + */ + +/dts-v1/; + +#include "kirkwood.dtsi" +#include "kirkwood-6281.dtsi" + +/ { + model = "NETGEAR Stora (MS2000/2110)"; + compatible = "netgear,stora", "marvell,kirkwood-88f6281", "marvell,kirkwood"; + + memory { /* 128 MB */ + device_type = "memory"; + reg = <0x00000000 0x8000000>; + }; + + aliases { + led-boot = &led_power; + led-failsafe = &led_power; + led-running = &led_power; + led-upgrade = &led_power; + }; + + chosen { + bootargs = "console=ttyS0,115200n8 earlyprintk"; + stdout-path = &uart0; + }; + + ocp@f1000000 { + pinctrl: pin-controller@10000 { + pmx_button_power: pmx-button-power { + marvell,pins = "mpp36"; + marvell,function = "gpio"; + }; + + pmx_button_reset: pmx-button-reset { + marvell,pins = "mpp38"; + marvell,function = "gpio"; + }; + + pmx_led_blue_power: pmx-led-blue-power { + marvell,pins = "mpp31"; + marvell,function = "gpio"; + }; + + pmx_led_green_disk1: pmx-led-green-disk1 { + marvell,pins = "mpp21"; + marvell,function = "gpio"; + }; + + pmx_led_green_disk2: pmx-led-green-disk2 { + marvell,pins = "mpp20"; + marvell,function = "gpio"; + }; + + pmx_led_red_disk1: pmx-led-red-disk1 { + marvell,pins = "mpp23"; + marvell,function = "gpio"; + }; + + pmx_led_red_disk2: pmx-led-red-disk2 { + marvell,pins = "mpp22"; + marvell,function = "gpio"; + }; + + pmx_poweroff: pmx-poweroff { + marvell,pins = "mpp40"; + marvell,function = "gpio"; + }; + + pmx_fan_tacho: pmx-fan-tacho { + marvell,pins = "mpp41"; + marvell,function = "gpio"; + }; + }; + + clocks { + pcf8563_clk: pcf8563-oscillator { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <2048>; + }; + }; + + i2c@11000 { + status = "okay"; + + tc654@1b { + compatible = "microchip,tc654"; + reg = <0x1b>; + }; + + lm75@48 { + compatible = "national,lm75"; + reg = <0x48>; + }; + + pcf8563@51 { + compatible = "nxp,pcf8563"; + reg = <0x51>; + }; + }; + + serial@12000 { + status = "okay"; + }; + + sata@80000 { + status = "okay"; + phy-names = "port0", "port1"; + nr-ports = <2>; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + pinctrl-0 = < &pmx_led_blue_power + &pmx_led_green_disk1 &pmx_led_green_disk2 + &pmx_led_red_disk1 &pmx_led_red_disk2 >; + pinctrl-names = "default"; + + led_power: power { + label = "blue:power"; + gpios = <&gpio0 31 GPIO_ACTIVE_LOW>; + linux,default-trigger = "default-on"; + }; + + disk1 { + label = "green:disk1"; + gpios = <&gpio0 21 GPIO_ACTIVE_LOW>; + linux,default-trigger = "ata1"; + }; + + disk2 { + label = "green:disk2"; + gpios = <&gpio0 20 GPIO_ACTIVE_LOW>; + linux,default-trigger = "ata2"; + }; + + disk1_fail { + label = "red:disk1_fail"; + gpios = <&gpio0 23 GPIO_ACTIVE_LOW>; + }; + + disk2_fail { + label = "red:disk2_fail"; + gpios = <&gpio0 22 GPIO_ACTIVE_LOW>; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + pinctrl-0 = <&pmx_button_power &pmx_button_reset >; + pinctrl-names = "default"; + + power { + label = "Power Button"; + linux,code = ; + gpios = <&gpio1 4 GPIO_ACTIVE_LOW>; + }; + + reset { + label = "Reset Button"; + linux,code = ; + gpios = <&gpio1 6 GPIO_ACTIVE_LOW>; + }; + }; + + gpio-poweroff { + compatible = "gpio-poweroff"; + pinctrl-0 = <&pmx_poweroff>; + pinctrl-names = "default"; + gpios = <&gpio0 40 GPIO_ACTIVE_LOW>; + }; +}; + +&nand { + status = "okay"; + chip-delay = <40>; + + partition@0 { + label = "u-boot"; + reg = <0x0000000 0x0e0000>; + read-only; + }; + + partition@e0000 { + label = "u-boot-env"; + reg = <0x0e00000 0x020000>; + }; + + partition@100000 { + label = "ubi"; + reg = <0x0100000 0xff00000>; + }; +}; + +&mdio { + status = "okay"; + + ethphy0: ethernet-phy@0 { /* Marvell 88E1318 */ + compatible = "marvell,88e1116"; + reg = <8>; + }; +}; + +ð0 { + status = "okay"; + + ethernet0-port@0 { + phy-handle = <ðphy0>; + }; +}; + +&pciec { + status = "okay"; +}; + +&pcie0 { + status = "okay"; +}; diff --git a/target/linux/kirkwood/image/Makefile b/target/linux/kirkwood/image/Makefile index 49d0124f43..70c11628f0 100644 --- a/target/linux/kirkwood/image/Makefile +++ b/target/linux/kirkwood/image/Makefile @@ -271,6 +271,16 @@ define Device/netgear_readynas-duo-v2 endef TARGET_DEVICES += netgear_readynas-duo-v2 +define Device/netgear_stora + DEVICE_VENDOR := Netgear + DEVICE_MODEL := Stora (MS2000/2110) + DEVICE_DTS := kirkwood-stora + DEVICE_PACKAGES := kmod-ata-marvell-sata kmod-fs-ext4 \ + kmod-rtc-pcf8563 kmod-hwmon-lm75 kmod-hwmon-tc654 \ + kmod-gpio-button-hotplug +endef +TARGET_DEVICES += netgear_stora + define Device/raidsonic_ib-nas62x0 DEVICE_VENDOR := RaidSonic DEVICE_MODEL := ICY BOX IB-NAS62x0 diff --git a/target/linux/kirkwood/patches-5.15/117-netgear_stora.patch b/target/linux/kirkwood/patches-5.15/117-netgear_stora.patch new file mode 100644 index 0000000000..3ebef23ac4 --- /dev/null +++ b/target/linux/kirkwood/patches-5.15/117-netgear_stora.patch @@ -0,0 +1,10 @@ +--- a/arch/arm/boot/dts/Makefile ++++ b/arch/arm/boot/dts/Makefile +@@ -339,6 +339,7 @@ dtb-$(CONFIG_MACH_KIRKWOOD) += \ + kirkwood-rs411.dtb \ + kirkwood-sheevaplug.dtb \ + kirkwood-sheevaplug-esata.dtb \ ++ kirkwood-stora.dtb \ + kirkwood-t5325.dtb \ + kirkwood-topkick.dtb \ + kirkwood-ts219-6281.dtb \ diff --git a/target/linux/kirkwood/patches-6.1/117-netgear_stora.patch b/target/linux/kirkwood/patches-6.1/117-netgear_stora.patch new file mode 100644 index 0000000000..c7518933b2 --- /dev/null +++ b/target/linux/kirkwood/patches-6.1/117-netgear_stora.patch @@ -0,0 +1,10 @@ +--- a/arch/arm/boot/dts/Makefile ++++ b/arch/arm/boot/dts/Makefile +@@ -375,6 +375,7 @@ dtb-$(CONFIG_MACH_KIRKWOOD) += \ + kirkwood-rs411.dtb \ + kirkwood-sheevaplug.dtb \ + kirkwood-sheevaplug-esata.dtb \ ++ kirkwood-stora.dtb \ + kirkwood-t5325.dtb \ + kirkwood-topkick.dtb \ + kirkwood-ts219-6281.dtb \