From: Willem van den Akker Date: Thu, 9 Jul 2020 12:51:19 +0000 (+0200) Subject: lantiq: set correct gphy pins for Zyxel P-2812 X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=0df71e01cfe67516df63df025eb88a4d5d40f230;p=openwrt%2Fstaging%2Fxback.git lantiq: set correct gphy pins for Zyxel P-2812 This fixes the gphy LED pins for Zyxel P-2812 devices. The have been accidentally altered during a tidy-up operation (see Fixes: below). No ports were available, dmesg reported: [ 0.658577] pinctrl-xway 1e100b10.pinmux: pin io5 already requested by 1e100bb0.stp; cannot claim for 1e108000.eth [ 0.667566] pinctrl-xway 1e100b10.pinmux: pin-5 (1e108000.eth) status -22 [ 0.685238] lantiq,xrx200-net 1e108000.eth: Error applying setting, reverse things back [ 0.693270] lantiq,xrx200-net: probe of 1e108000.eth failed with error -22 Fixes: FS#3188 Fixes: 660200e53d62 ("lantiq: dts: assign the GPHY LED pins to the Ethernet controller node") Suggested-by: Mathias Kresin Signed-off-by: Willem van den Akker [commit message facelift] Signed-off-by: Adrian Schmutzler --- diff --git a/target/linux/lantiq/files-4.19/arch/mips/boot/dts/lantiq/vr9_zyxel_p-2812hnu-fx.dtsi b/target/linux/lantiq/files-4.19/arch/mips/boot/dts/lantiq/vr9_zyxel_p-2812hnu-fx.dtsi index 5f8392ca44..6c30a91553 100644 --- a/target/linux/lantiq/files-4.19/arch/mips/boot/dts/lantiq/vr9_zyxel_p-2812hnu-fx.dtsi +++ b/target/linux/lantiq/files-4.19/arch/mips/boot/dts/lantiq/vr9_zyxel_p-2812hnu-fx.dtsi @@ -112,7 +112,7 @@ ð0 { pinctrl-0 = <&mdio_pins>, - <&gphy0_led0_pins>, <&gphy0_led2_pins>, + <&gphy0_led1_pins>, <&gphy0_led2_pins>, <&gphy1_led1_pins>, <&gphy1_led2_pins>; pinctrl-names = "default"; diff --git a/target/linux/lantiq/files-5.4/arch/mips/boot/dts/lantiq/vr9_zyxel_p-2812hnu-fx.dtsi b/target/linux/lantiq/files-5.4/arch/mips/boot/dts/lantiq/vr9_zyxel_p-2812hnu-fx.dtsi index 5f8392ca44..6c30a91553 100644 --- a/target/linux/lantiq/files-5.4/arch/mips/boot/dts/lantiq/vr9_zyxel_p-2812hnu-fx.dtsi +++ b/target/linux/lantiq/files-5.4/arch/mips/boot/dts/lantiq/vr9_zyxel_p-2812hnu-fx.dtsi @@ -112,7 +112,7 @@ ð0 { pinctrl-0 = <&mdio_pins>, - <&gphy0_led0_pins>, <&gphy0_led2_pins>, + <&gphy0_led1_pins>, <&gphy0_led2_pins>, <&gphy1_led1_pins>, <&gphy1_led2_pins>; pinctrl-names = "default";