From: INAGAKI Hiroshi Date: Wed, 11 Aug 2021 11:23:06 +0000 (+0900) Subject: realtek: copy dts directory for Kernel 5.10 X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=0de230bd0ce1c011a6d57ce7692b1b7898e7b735;p=openwrt%2Fstaging%2Fthess.git realtek: copy dts directory for Kernel 5.10 This patch adds "dts-5.10" directory to use backported drivers. There are several specification changes in the new drivers, so there are some compatibility issues in using dts/dtsi files for 5.4. The old DTS files are moved to "dts-5.4", so their corresponding kernel version is obvious as well. Signed-off-by: INAGAKI Hiroshi [change "dts" to "dts-5.4", adjust Makefile] Signed-off-by: Adrian Schmutzler --- diff --git a/target/linux/realtek/dts-5.10/rtl8380_netgear_gigabit.dtsi b/target/linux/realtek/dts-5.10/rtl8380_netgear_gigabit.dtsi new file mode 100644 index 0000000000..8ba66d6023 --- /dev/null +++ b/target/linux/realtek/dts-5.10/rtl8380_netgear_gigabit.dtsi @@ -0,0 +1,78 @@ +// SPDX-License-Identifier: GPL-2.0-or-later + +#include "rtl838x.dtsi" + +#include +#include + +/ { + compatible = "realtek,rtl838x-soc"; + + chosen { + bootargs = "console=ttyS0,115200"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x8000000>; + }; + + keys { + compatible = "gpio-keys-polled"; + poll-interval = <20>; + + mode { + label = "reset"; + gpios = <&gpio0 24 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + }; +}; + +&gpio0 { + indirect-access-bus-id = <0>; +}; + +ðernet0 { + mdio: mdio-bus { + compatible = "realtek,rtl838x-mdio"; + regmap = <ðernet0>; + #address-cells = <1>; + #size-cells = <0>; + + INTERNAL_PHY(8) + INTERNAL_PHY(9) + INTERNAL_PHY(10) + INTERNAL_PHY(11) + INTERNAL_PHY(12) + INTERNAL_PHY(13) + INTERNAL_PHY(14) + INTERNAL_PHY(15) + }; +}; + +&switch0 { + ports { + #address-cells = <1>; + #size-cells = <0>; + + SWITCH_PORT(8, 1, internal) + SWITCH_PORT(9, 2, internal) + SWITCH_PORT(10, 3, internal) + SWITCH_PORT(11, 4, internal) + SWITCH_PORT(12, 5, internal) + SWITCH_PORT(13, 6, internal) + SWITCH_PORT(14, 7, internal) + SWITCH_PORT(15, 8, internal) + + port@28 { + ethernet = <ðernet0>; + reg = <28>; + phy-mode = "internal"; + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + }; +}; diff --git a/target/linux/realtek/dts-5.10/rtl8380_netgear_gigabit_1xx.dtsi b/target/linux/realtek/dts-5.10/rtl8380_netgear_gigabit_1xx.dtsi new file mode 100644 index 0000000000..7eccfcb5a2 --- /dev/null +++ b/target/linux/realtek/dts-5.10/rtl8380_netgear_gigabit_1xx.dtsi @@ -0,0 +1,61 @@ +// SPDX-License-Identifier: GPL-2.0-or-later + +#include "rtl8380_netgear_gigabit.dtsi" + +&spi0 { + status = "okay"; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <50000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "u-boot"; + reg = <0x0000000 0x00e0000>; + read-only; + }; + + partition@e0000 { + label = "u-boot-env"; + reg = <0x00e0000 0x0010000>; + read-only; + }; + + partition@f0000 { + label = "u-boot-env2"; + reg = <0x00f0000 0x0010000>; + }; + + partition@100000 { + label = "jffs"; + reg = <0x0100000 0x0100000>; + read-only; + }; + + partition@200000 { + label = "jffs2"; + reg = <0x0200000 0x0100000>; + read-only; + }; + + partition@300000 { + label = "firmware"; + compatible = "openwrt,uimage", "denx,uimage"; + openwrt,ih-magic = <0x4e474520>; + reg = <0x0300000 0x0e80000>; + }; + + partition@1180000 { + label = "runtime2"; + reg = <0x1180000 0x0e80000>; + read-only; + }; + }; + }; +}; diff --git a/target/linux/realtek/dts-5.10/rtl8380_netgear_gigabit_3xx.dtsi b/target/linux/realtek/dts-5.10/rtl8380_netgear_gigabit_3xx.dtsi new file mode 100644 index 0000000000..efb146a25a --- /dev/null +++ b/target/linux/realtek/dts-5.10/rtl8380_netgear_gigabit_3xx.dtsi @@ -0,0 +1,61 @@ +// SPDX-License-Identifier: GPL-2.0-or-later + +#include "rtl8380_netgear_gigabit.dtsi" + +&spi0 { + status = "okay"; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <50000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "u-boot"; + reg = <0x0000000 0x00e0000>; + read-only; + }; + + partition@e0000 { + label = "u-boot-env"; + reg = <0x00e0000 0x0010000>; + read-only; + }; + + partition@f0000 { + label = "u-boot-env2"; + reg = <0x00f0000 0x0010000>; + }; + + partition@100000 { + label = "jffs"; + reg = <0x0100000 0x0100000>; + read-only; + }; + + partition@200000 { + label = "jffs2"; + reg = <0x0200000 0x0100000>; + read-only; + }; + + partition@300000 { + label = "firmware"; + compatible = "openwrt,uimage", "denx,uimage"; + openwrt,ih-magic = <0x4e474335>; + reg = <0x0300000 0x0e80000>; + }; + + partition@1180000 { + label = "runtime2"; + reg = <0x1180000 0x0e80000>; + read-only; + }; + }; + }; +}; diff --git a/target/linux/realtek/dts-5.10/rtl8380_netgear_gs108t-v3.dts b/target/linux/realtek/dts-5.10/rtl8380_netgear_gs108t-v3.dts new file mode 100644 index 0000000000..b701e88d1a --- /dev/null +++ b/target/linux/realtek/dts-5.10/rtl8380_netgear_gs108t-v3.dts @@ -0,0 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0-or-later + +#include "rtl8380_netgear_gigabit_1xx.dtsi" + +/ { + compatible = "netgear,gs108t-v3", "realtek,rtl838x-soc"; + model = "Netgear GS108T v3"; +}; diff --git a/target/linux/realtek/dts-5.10/rtl8380_netgear_gs110tpp-v1.dts b/target/linux/realtek/dts-5.10/rtl8380_netgear_gs110tpp-v1.dts new file mode 100644 index 0000000000..646f4ed516 --- /dev/null +++ b/target/linux/realtek/dts-5.10/rtl8380_netgear_gs110tpp-v1.dts @@ -0,0 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0-or-later + +#include "rtl8380_netgear_gigabit_1xx.dtsi" + +/ { + compatible = "netgear,gs110tpp-v1", "realtek,rtl838x-soc"; + model = "Netgear GS110TPP v1"; +}; diff --git a/target/linux/realtek/dts-5.10/rtl8380_netgear_gs308t-v1.dts b/target/linux/realtek/dts-5.10/rtl8380_netgear_gs308t-v1.dts new file mode 100644 index 0000000000..016ed8beb6 --- /dev/null +++ b/target/linux/realtek/dts-5.10/rtl8380_netgear_gs308t-v1.dts @@ -0,0 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0-or-later + +#include "rtl8380_netgear_gigabit_3xx.dtsi" + +/ { + compatible = "netgear,gs308t-v1", "realtek,rtl838x-soc"; + model = "Netgear GS308T v1"; +}; diff --git a/target/linux/realtek/dts-5.10/rtl8380_netgear_gs310tp-v1.dts b/target/linux/realtek/dts-5.10/rtl8380_netgear_gs310tp-v1.dts new file mode 100644 index 0000000000..e3f59bde69 --- /dev/null +++ b/target/linux/realtek/dts-5.10/rtl8380_netgear_gs310tp-v1.dts @@ -0,0 +1,21 @@ +// SPDX-License-Identifier: GPL-2.0-or-later + +#include "rtl8380_netgear_gigabit_3xx.dtsi" + +/ { + compatible = "netgear,gs310tp-v1", "realtek,rtl838x-soc"; + model = "Netgear GS310TP v1"; + +}; + +&mdio { + INTERNAL_PHY(24) + INTERNAL_PHY(26) +}; + +&switch0 { + ports { + SWITCH_SFP_PORT(24, 9, rgmii-id) + SWITCH_SFP_PORT(26, 10, rgmii-id) + }; +}; diff --git a/target/linux/realtek/dts-5.10/rtl8380_zyxel_gs1900-10hp.dts b/target/linux/realtek/dts-5.10/rtl8380_zyxel_gs1900-10hp.dts new file mode 100644 index 0000000000..c16028788e --- /dev/null +++ b/target/linux/realtek/dts-5.10/rtl8380_zyxel_gs1900-10hp.dts @@ -0,0 +1,71 @@ +// SPDX-License-Identifier: GPL-2.0-or-later + +#include "rtl8380_zyxel_gs1900.dtsi" + +/ { + compatible = "zyxel,gs1900-10hp", "realtek,rtl838x-soc"; + model = "ZyXEL GS1900-10HP Switch"; + + /* i2c of the left SFP cage: port 9 */ + i2c0: i2c-gpio-0 { + compatible = "i2c-gpio"; + sda-gpios = <&gpio1 24 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + scl-gpios = <&gpio1 25 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + i2c-gpio,delay-us = <2>; + #address-cells = <1>; + #size-cells = <0>; + }; + + sfp0: sfp-p9 { + compatible = "sff,sfp"; + i2c-bus = <&i2c0>; + los-gpio = <&gpio1 27 GPIO_ACTIVE_HIGH>; + tx-fault-gpio = <&gpio1 22 GPIO_ACTIVE_HIGH>; + mod-def0-gpio = <&gpio1 26 GPIO_ACTIVE_LOW>; + tx-disable-gpio = <&gpio1 23 GPIO_ACTIVE_HIGH>; + }; + + /* i2c of the right SFP cage: port 10 */ + i2c1: i2c-gpio-1 { + compatible = "i2c-gpio"; + sda-gpios = <&gpio1 30 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + scl-gpios = <&gpio1 31 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + i2c-gpio,delay-us = <2>; + #address-cells = <1>; + #size-cells = <0>; + }; + + sfp1: sfp-p10 { + compatible = "sff,sfp"; + i2c-bus = <&i2c1>; + los-gpio = <&gpio1 33 GPIO_ACTIVE_HIGH>; + tx-fault-gpio = <&gpio1 28 GPIO_ACTIVE_HIGH>; + mod-def0-gpio = <&gpio1 32 GPIO_ACTIVE_LOW>; + tx-disable-gpio = <&gpio1 29 GPIO_ACTIVE_HIGH>; + }; +}; + +&mdio { + INTERNAL_PHY(24) + INTERNAL_PHY(26) +}; + +&switch0 { + ports { + port@24 { + reg = <24>; + label = "lan9"; + phy-mode = "1000base-x"; + managed = "in-band-status"; + sfp = <&sfp0>; + }; + + port@26 { + reg = <26>; + label = "lan10"; + phy-mode = "1000base-x"; + managed = "in-band-status"; + sfp = <&sfp1>; + }; + }; +}; diff --git a/target/linux/realtek/dts-5.10/rtl8380_zyxel_gs1900-8.dts b/target/linux/realtek/dts-5.10/rtl8380_zyxel_gs1900-8.dts new file mode 100644 index 0000000000..e9c5efe603 --- /dev/null +++ b/target/linux/realtek/dts-5.10/rtl8380_zyxel_gs1900-8.dts @@ -0,0 +1,12 @@ +// SPDX-License-Identifier: GPL-2.0-or-later + +#include "rtl8380_zyxel_gs1900.dtsi" + +/ { + compatible = "zyxel,gs1900-8", "realtek,rtl838x-soc"; + model = "ZyXEL GS1900-8 Switch"; +}; + +&gpio1 { + /delete-node/ poe_enable; +}; diff --git a/target/linux/realtek/dts-5.10/rtl8380_zyxel_gs1900-8hp-v1.dts b/target/linux/realtek/dts-5.10/rtl8380_zyxel_gs1900-8hp-v1.dts new file mode 100644 index 0000000000..0d9b7c97c0 --- /dev/null +++ b/target/linux/realtek/dts-5.10/rtl8380_zyxel_gs1900-8hp-v1.dts @@ -0,0 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0-or-later + +#include "rtl8380_zyxel_gs1900.dtsi" + +/ { + compatible = "zyxel,gs1900-8hp-v1", "realtek,rtl838x-soc"; + model = "ZyXEL GS1900-8HP v1 Switch"; +}; diff --git a/target/linux/realtek/dts-5.10/rtl8380_zyxel_gs1900-8hp-v2.dts b/target/linux/realtek/dts-5.10/rtl8380_zyxel_gs1900-8hp-v2.dts new file mode 100644 index 0000000000..cdc4aed6d1 --- /dev/null +++ b/target/linux/realtek/dts-5.10/rtl8380_zyxel_gs1900-8hp-v2.dts @@ -0,0 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0-or-later + +#include "rtl8380_zyxel_gs1900.dtsi" + +/ { + compatible = "zyxel,gs1900-8hp-v2", "realtek,rtl838x-soc"; + model = "ZyXEL GS1900-8HP v2 Switch"; +}; diff --git a/target/linux/realtek/dts-5.10/rtl8380_zyxel_gs1900.dtsi b/target/linux/realtek/dts-5.10/rtl8380_zyxel_gs1900.dtsi new file mode 100644 index 0000000000..d61ac3b2b8 --- /dev/null +++ b/target/linux/realtek/dts-5.10/rtl8380_zyxel_gs1900.dtsi @@ -0,0 +1,148 @@ +// SPDX-License-Identifier: GPL-2.0-or-later + +#include "rtl838x.dtsi" + +#include +#include + +/ { + aliases { + led-boot = &led_sys; + led-failsafe = &led_sys; + led-running = &led_sys; + led-upgrade = &led_sys; + }; + + chosen { + bootargs = "console=ttyS0,115200"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x8000000>; + }; + + gpio1: rtl8231-gpio { + status = "okay"; + + poe_enable { + gpio-hog; + gpios = <13 0>; + output-high; + }; + }; + + keys { + compatible = "gpio-keys-polled"; + poll-interval = <20>; + + reset { + label = "reset"; + gpios = <&gpio1 3 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + }; + + leds { + compatible = "gpio-leds"; + + led_sys: sys { + label = "green:sys"; + gpios = <&gpio0 47 GPIO_ACTIVE_HIGH>; + }; + }; +}; + +&spi0 { + status = "okay"; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <10000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x40000>; + read-only; + }; + partition@40000 { + label = "u-boot-env"; + reg = <0x40000 0x10000>; + read-only; + }; + partition@50000 { + label = "u-boot-env2"; + reg = <0x50000 0x10000>; + }; + partition@60000 { + label = "jffs"; + reg = <0x60000 0x100000>; + }; + partition@160000 { + label = "jffs2"; + reg = <0x160000 0x100000>; + }; + partition@b260000 { + label = "firmware"; + reg = <0x260000 0x6d0000>; + compatible = "openwrt,uimage", "denx,uimage"; + openwrt,ih-magic = <0x83800000>; + }; + partition@930000 { + label = "runtime2"; + reg = <0x930000 0x6d0000>; + }; + }; + }; +}; + +ðernet0 { + mdio: mdio-bus { + compatible = "realtek,rtl838x-mdio"; + regmap = <ðernet0>; + #address-cells = <1>; + #size-cells = <0>; + + INTERNAL_PHY(8) + INTERNAL_PHY(9) + INTERNAL_PHY(10) + INTERNAL_PHY(11) + INTERNAL_PHY(12) + INTERNAL_PHY(13) + INTERNAL_PHY(14) + INTERNAL_PHY(15) + }; +}; + +&switch0 { + ports { + #address-cells = <1>; + #size-cells = <0>; + + SWITCH_PORT(8, 1, internal) + SWITCH_PORT(9, 2, internal) + SWITCH_PORT(10, 3, internal) + SWITCH_PORT(11, 4, internal) + SWITCH_PORT(12, 5, internal) + SWITCH_PORT(13, 6, internal) + SWITCH_PORT(14, 7, internal) + SWITCH_PORT(15, 8, internal) + + port@28 { + ethernet = <ðernet0>; + reg = <28>; + phy-mode = "internal"; + + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + }; +}; diff --git a/target/linux/realtek/dts-5.10/rtl8382_allnet_all-sg8208m.dts b/target/linux/realtek/dts-5.10/rtl8382_allnet_all-sg8208m.dts new file mode 100644 index 0000000000..fdcc01fdac --- /dev/null +++ b/target/linux/realtek/dts-5.10/rtl8382_allnet_all-sg8208m.dts @@ -0,0 +1,146 @@ +// SPDX-License-Identifier: GPL-2.0-or-later + +#include "rtl838x.dtsi" + +#include +#include + +/ { + compatible = "allnet,all-sg8208m", "realtek,rtl838x-soc"; + model = "ALLNET ALL-SG8208M"; + + aliases { + led-boot = &led_sys; + led-failsafe = &led_sys; + led-running = &led_sys; + led-upgrade = &led_sys; + }; + + chosen { + bootargs = "console=ttyS0,115200"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x8000000>; + }; + + keys { + compatible = "gpio-keys-polled"; + poll-interval = <20>; + + reset { + label = "reset"; + gpios = <&gpio0 67 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + }; + + leds { + compatible = "gpio-leds"; + + led_sys: sys { + label = "green:sys"; + gpios = <&gpio0 47 GPIO_ACTIVE_HIGH>; + }; + // GPIO 25: power on/off all port leds + }; +}; + +&gpio0 { + indirect-access-bus-id = <0>; +}; + +&spi0 { + status = "okay"; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <10000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x80000>; + read-only; + }; + + partition@80000 { + label = "u-boot-env"; + reg = <0x80000 0x10000>; + read-only; + }; + + partition@90000 { + label = "u-boot-env2"; + reg = <0x90000 0x10000>; + }; + + partition@a0000 { + label = "jffs"; + reg = <0xa0000 0x100000>; + }; + + partition@1a0000 { + label = "jffs2"; + reg = <0x1a0000 0x100000>; + }; + + partition@2a0000 { + label = "firmware"; + reg = <0x2a0000 0xd60000>; + compatible = "openwrt,uimage", "denx,uimage"; + openwrt,ih-magic = <0x00000006>; + }; + }; + }; +}; + +ðernet0 { + mdio: mdio-bus { + compatible = "realtek,rtl838x-mdio"; + regmap = <ðernet0>; + #address-cells = <1>; + #size-cells = <0>; + + INTERNAL_PHY(8) + INTERNAL_PHY(9) + INTERNAL_PHY(10) + INTERNAL_PHY(11) + INTERNAL_PHY(12) + INTERNAL_PHY(13) + INTERNAL_PHY(14) + INTERNAL_PHY(15) + }; +}; + +&switch0 { + ports { + #address-cells = <1>; + #size-cells = <0>; + + SWITCH_PORT(8, 1, internal) + SWITCH_PORT(9, 2, internal) + SWITCH_PORT(10, 3, internal) + SWITCH_PORT(11, 4, internal) + SWITCH_PORT(12, 5, internal) + SWITCH_PORT(13, 6, internal) + SWITCH_PORT(14, 7, internal) + SWITCH_PORT(15, 8, internal) + + port@28 { + ethernet = <ðernet0>; + reg = <28>; + phy-mode = "internal"; + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + }; +}; diff --git a/target/linux/realtek/dts-5.10/rtl8382_d-link_dgs-1210-10p.dts b/target/linux/realtek/dts-5.10/rtl8382_d-link_dgs-1210-10p.dts new file mode 100644 index 0000000000..e2f5e7a4c0 --- /dev/null +++ b/target/linux/realtek/dts-5.10/rtl8382_d-link_dgs-1210-10p.dts @@ -0,0 +1,152 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT + +#include "rtl838x.dtsi" + +#include +#include + +/ { + compatible = "d-link,dgs-1210-10p", "realtek,rtl838x-soc"; + model = "D-Link DGS-1210-10P"; + + aliases { + led-boot = &led_power; + led-failsafe = &led_power; + led-running = &led_power; + led-upgrade = &led_power; + }; + + chosen { + bootargs = "console=ttyS0,115200"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x8000000>; + }; + + leds { + compatible = "gpio-leds"; + + led_power: power { + // GPIO 24 seems to provide power to the leds + label = "green:power"; + gpios = <&gpio0 47 GPIO_ACTIVE_LOW>; + }; + }; + + keys { + compatible = "gpio-keys-polled"; + poll-interval = <20>; + + mode { + label = "reset"; + gpios = <&gpio0 94 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + }; +}; + + +&gpio0 { + indirect-access-bus-id = <0>; +}; + +&spi0 { + status = "okay"; + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <10000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "u-boot"; + reg = <0x00000000 0x80000>; + read-only; + }; + partition@80000 { + label = "u-boot-env"; + reg = <0x00080000 0x40000>; + read-only; + }; + partition@c0000 { + label = "u-boot-env2"; + reg = <0x000c0000 0x40000>; + }; + partition@280000 { + label = "firmware"; + compatible = "denx,uimage"; + reg = <0x00100000 0xd80000>; + }; + partition@be80000 { + label = "kernel2"; + reg = <0x00e80000 0x180000>; + }; + partition@1000000 { + label = "sysinfo"; + reg = <0x01000000 0x40000>; + }; + partition@1040000 { + label = "rootfs2"; + reg = <0x01040000 0xc00000>; + }; + partition@1c40000 { + label = "jffs2"; + reg = <0x01c40000 0x3c0000>; + }; + }; + }; +}; + +ðernet0 { + mdio: mdio-bus { + compatible = "realtek,rtl838x-mdio"; + regmap = <ðernet0>; + #address-cells = <1>; + #size-cells = <0>; + + INTERNAL_PHY(8) + INTERNAL_PHY(9) + INTERNAL_PHY(10) + INTERNAL_PHY(11) + INTERNAL_PHY(12) + INTERNAL_PHY(13) + INTERNAL_PHY(14) + INTERNAL_PHY(15) + INTERNAL_PHY(24) + INTERNAL_PHY(26) + }; +}; + +&switch0 { + ports { + #address-cells = <1>; + #size-cells = <0>; + + SWITCH_PORT(8, 1, internal) + SWITCH_PORT(9, 2, internal) + SWITCH_PORT(10, 3, internal) + SWITCH_PORT(11, 4, internal) + SWITCH_PORT(12, 5, internal) + SWITCH_PORT(13, 6, internal) + SWITCH_PORT(14, 7, internal) + SWITCH_PORT(15, 8, internal) + SWITCH_SFP_PORT(24, 9, rgmii-id) + SWITCH_SFP_PORT(26, 10, rgmii-id) + + port@28 { + ethernet = <ðernet0>; + reg = <28>; + phy-mode = "internal"; + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + }; +}; diff --git a/target/linux/realtek/dts-5.10/rtl8382_d-link_dgs-1210-16.dts b/target/linux/realtek/dts-5.10/rtl8382_d-link_dgs-1210-16.dts new file mode 100644 index 0000000000..ac51185ed0 --- /dev/null +++ b/target/linux/realtek/dts-5.10/rtl8382_d-link_dgs-1210-16.dts @@ -0,0 +1,80 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT + +#include "rtl8382_d-link_dgs-1210.dtsi" + +/ { + compatible = "d-link,dgs-1210-16", "realtek,rtl838x-soc"; + model = "D-Link DGS-1210-16"; +}; + +ðernet0 { + mdio: mdio-bus { + compatible = "realtek,rtl838x-mdio"; + regmap = <ðernet0>; + #address-cells = <1>; + #size-cells = <0>; + + EXTERNAL_PHY(0) + EXTERNAL_PHY(1) + EXTERNAL_PHY(2) + EXTERNAL_PHY(3) + EXTERNAL_PHY(4) + EXTERNAL_PHY(5) + EXTERNAL_PHY(6) + EXTERNAL_PHY(7) + + INTERNAL_PHY(8) + INTERNAL_PHY(9) + INTERNAL_PHY(10) + INTERNAL_PHY(11) + INTERNAL_PHY(12) + INTERNAL_PHY(13) + INTERNAL_PHY(14) + INTERNAL_PHY(15) + + EXTERNAL_SFP_PHY(24) + EXTERNAL_SFP_PHY(25) + EXTERNAL_SFP_PHY(26) + EXTERNAL_SFP_PHY(27) + }; +}; + +&switch0 { + ports { + #address-cells = <1>; + #size-cells = <0>; + + SWITCH_PORT(0, 1, qsgmii) + SWITCH_PORT(1, 2, qsgmii) + SWITCH_PORT(2, 3, qsgmii) + SWITCH_PORT(3, 4, qsgmii) + SWITCH_PORT(4, 5, qsgmii) + SWITCH_PORT(5, 6, qsgmii) + SWITCH_PORT(6, 7, qsgmii) + SWITCH_PORT(7, 8, qsgmii) + + SWITCH_PORT(8, 9, internal) + SWITCH_PORT(9, 10, internal) + SWITCH_PORT(10, 11, internal) + SWITCH_PORT(11, 12, internal) + SWITCH_PORT(12, 13, internal) + SWITCH_PORT(13, 14, internal) + SWITCH_PORT(14, 15, internal) + SWITCH_PORT(15, 16, internal) + + SWITCH_PORT(24, 17, qsgmii) + SWITCH_PORT(25, 18, qsgmii) + SWITCH_PORT(26, 19, qsgmii) + SWITCH_PORT(27, 20, qsgmii) + + port@28 { + ethernet = <ðernet0>; + reg = <28>; + phy-mode = "internal"; + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + }; +}; diff --git a/target/linux/realtek/dts-5.10/rtl8382_d-link_dgs-1210-28.dts b/target/linux/realtek/dts-5.10/rtl8382_d-link_dgs-1210-28.dts new file mode 100644 index 0000000000..edd4fb140f --- /dev/null +++ b/target/linux/realtek/dts-5.10/rtl8382_d-link_dgs-1210-28.dts @@ -0,0 +1,98 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT + +#include "rtl8382_d-link_dgs-1210.dtsi" + +/ { + compatible = "d-link,dgs-1210-28", "realtek,rtl838x-soc"; + model = "D-Link DGS-1210-28"; +}; + +ðernet0 { + mdio: mdio-bus { + compatible = "realtek,rtl838x-mdio"; + regmap = <ðernet0>; + #address-cells = <1>; + #size-cells = <0>; + + EXTERNAL_PHY(0) + EXTERNAL_PHY(1) + EXTERNAL_PHY(2) + EXTERNAL_PHY(3) + EXTERNAL_PHY(4) + EXTERNAL_PHY(5) + EXTERNAL_PHY(6) + EXTERNAL_PHY(7) + + INTERNAL_PHY(8) + INTERNAL_PHY(9) + INTERNAL_PHY(10) + INTERNAL_PHY(11) + INTERNAL_PHY(12) + INTERNAL_PHY(13) + INTERNAL_PHY(14) + INTERNAL_PHY(15) + + EXTERNAL_PHY(16) + EXTERNAL_PHY(17) + EXTERNAL_PHY(18) + EXTERNAL_PHY(19) + EXTERNAL_PHY(20) + EXTERNAL_PHY(21) + EXTERNAL_PHY(22) + EXTERNAL_PHY(23) + + EXTERNAL_SFP_PHY(24) + EXTERNAL_SFP_PHY(25) + EXTERNAL_SFP_PHY(26) + EXTERNAL_SFP_PHY(27) + }; +}; + +&switch0 { + ports { + #address-cells = <1>; + #size-cells = <0>; + + SWITCH_PORT(0, 1, qsgmii) + SWITCH_PORT(1, 2, qsgmii) + SWITCH_PORT(2, 3, qsgmii) + SWITCH_PORT(3, 4, qsgmii) + SWITCH_PORT(4, 5, qsgmii) + SWITCH_PORT(5, 6, qsgmii) + SWITCH_PORT(6, 7, qsgmii) + SWITCH_PORT(7, 8, qsgmii) + + SWITCH_PORT(8, 9, internal) + SWITCH_PORT(9, 10, internal) + SWITCH_PORT(10, 11, internal) + SWITCH_PORT(11, 12, internal) + SWITCH_PORT(12, 13, internal) + SWITCH_PORT(13, 14, internal) + SWITCH_PORT(14, 15, internal) + SWITCH_PORT(15, 16, internal) + + SWITCH_PORT(16, 17, qsgmii) + SWITCH_PORT(17, 18, qsgmii) + SWITCH_PORT(18, 19, qsgmii) + SWITCH_PORT(19, 20, qsgmii) + SWITCH_PORT(20, 21, qsgmii) + SWITCH_PORT(21, 22, qsgmii) + SWITCH_PORT(22, 23, qsgmii) + SWITCH_PORT(23, 24, qsgmii) + + SWITCH_PORT(24, 25, qsgmii) + SWITCH_PORT(25, 26, qsgmii) + SWITCH_PORT(26, 27, qsgmii) + SWITCH_PORT(27, 28, qsgmii) + + port@28 { + ethernet = <ðernet0>; + reg = <28>; + phy-mode = "internal"; + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + }; +}; diff --git a/target/linux/realtek/dts-5.10/rtl8382_d-link_dgs-1210.dtsi b/target/linux/realtek/dts-5.10/rtl8382_d-link_dgs-1210.dtsi new file mode 100644 index 0000000000..a14738c8a9 --- /dev/null +++ b/target/linux/realtek/dts-5.10/rtl8382_d-link_dgs-1210.dtsi @@ -0,0 +1,88 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT + +#include "rtl838x.dtsi" + +#include +#include + +/ { + aliases { + led-boot = &led_power; + led-failsafe = &led_power; + led-running = &led_power; + led-upgrade = &led_power; + }; + + chosen { + bootargs = "console=ttyS0,115200"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x8000000>; + }; + + leds { + compatible = "gpio-leds"; + + led_power: power { + label = "green:power"; + gpios = <&gpio0 24 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&gpio0 { + indirect-access-bus-id = <0>; +}; + +&spi0 { + status = "okay"; + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <10000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "u-boot"; + reg = <0x00000000 0x80000>; + read-only; + }; + partition@80000 { + label = "u-boot-env"; + reg = <0x00080000 0x40000>; + read-only; + }; + partition@c0000 { + label = "u-boot-env2"; + reg = <0x000c0000 0x40000>; + }; + partition@280000 { + label = "firmware"; + compatible = "denx,uimage"; + reg = <0x00100000 0xd80000>; + }; + partition@be80000 { + label = "kernel2"; + reg = <0x00e80000 0x180000>; + }; + partition@1000000 { + label = "sysinfo"; + reg = <0x01000000 0x40000>; + }; + partition@1040000 { + label = "rootfs2"; + reg = <0x01040000 0xc00000>; + }; + partition@1c40000 { + label = "jffs2"; + reg = <0x01c40000 0x3c0000>; + }; + }; + }; +}; diff --git a/target/linux/realtek/dts-5.10/rtl8382_inaba_aml2-17gp.dts b/target/linux/realtek/dts-5.10/rtl8382_inaba_aml2-17gp.dts new file mode 100644 index 0000000000..87761ac462 --- /dev/null +++ b/target/linux/realtek/dts-5.10/rtl8382_inaba_aml2-17gp.dts @@ -0,0 +1,164 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT + +#include "rtl838x.dtsi" + +#include +#include + +/ { + compatible = "inaba,aml2-17gp", "realtek,rtl838x-soc"; + model = "INABA Abaniact AML2-17GP"; + + chosen { + bootargs = "console=ttyS0,115200"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x8000000>; + }; + + keys { + compatible = "gpio-keys-polled"; + poll-interval = <20>; + + reset { + label = "reset"; + gpios = <&gpio0 24 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + }; +}; + +&gpio0 { + indirect-access-bus-id = <0>; +}; + +&spi0 { + status = "okay"; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <10000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x80000>; + read-only; + }; + + partition@80000 { + label = "u-boot-env"; + reg = <0x80000 0x10000>; + read-only; + }; + + partition@90000 { + label = "u-boot-env2"; + reg = <0x90000 0x10000>; + }; + + partition@a0000 { + label = "jffs2_cfg"; + reg = <0xa0000 0x400000>; + read-only; + }; + + partition@4a0000 { + label = "jffs2_log"; + reg = <0x4a0000 0x100000>; + read-only; + }; + + partition@5a0000 { + compatible = "openwrt,uimage", "denx,uimage"; + label = "firmware"; + reg = <0x5a0000 0xd30000>; + openwrt,ih-magic = <0x83800000>; + }; + + partition@12d0000 { + label = "runtime2"; + reg = <0x12d0000 0xd30000>; + }; + }; + }; +}; + +ðernet0 { + mdio-bus { + compatible = "realtek,rtl838x-mdio"; + regmap = <ðernet0>; + #address-cells = <1>; + #size-cells = <0>; + + INTERNAL_PHY(8) + INTERNAL_PHY(9) + INTERNAL_PHY(10) + INTERNAL_PHY(11) + INTERNAL_PHY(12) + INTERNAL_PHY(13) + INTERNAL_PHY(14) + INTERNAL_PHY(15) + + EXTERNAL_PHY(16) + EXTERNAL_PHY(17) + EXTERNAL_PHY(18) + EXTERNAL_PHY(19) + EXTERNAL_PHY(20) + EXTERNAL_PHY(21) + EXTERNAL_PHY(22) + EXTERNAL_PHY(23) + + EXTERNAL_PHY(24) + }; +}; + +&switch0 { + ports { + #address-cells = <1>; + #size-cells = <0>; + + SWITCH_PORT(8, 1, internal) + SWITCH_PORT(9, 2, internal) + SWITCH_PORT(10, 3, internal) + SWITCH_PORT(11, 4, internal) + SWITCH_PORT(12, 5, internal) + SWITCH_PORT(13, 6, internal) + SWITCH_PORT(14, 7, internal) + SWITCH_PORT(15, 8, internal) + + SWITCH_PORT(16, 9, qsgmii) + SWITCH_PORT(17, 10, qsgmii) + SWITCH_PORT(18, 11, qsgmii) + SWITCH_PORT(19, 12, qsgmii) + SWITCH_PORT(20, 13, qsgmii) + SWITCH_PORT(21, 14, qsgmii) + SWITCH_PORT(22, 15, qsgmii) + SWITCH_PORT(23, 16, qsgmii) + + port@24 { + reg = <24>; + label = "wan"; + phy-handle = <&phy24>; + phy-mode = "qsgmii"; + }; + + port@28 { + ethernet = <ðernet0>; + reg = <28>; + phy-mode = "internal"; + + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + }; +}; diff --git a/target/linux/realtek/dts-5.10/rtl8382_zyxel_gs1900-24hp-v2.dts b/target/linux/realtek/dts-5.10/rtl8382_zyxel_gs1900-24hp-v2.dts new file mode 100644 index 0000000000..c16152521e --- /dev/null +++ b/target/linux/realtek/dts-5.10/rtl8382_zyxel_gs1900-24hp-v2.dts @@ -0,0 +1,117 @@ +// SPDX-License-Identifier: GPL-2.0-or-later + +#include "rtl8380_zyxel_gs1900.dtsi" + +/ { + compatible = "zyxel,gs1900-24hp-v2", "realtek,rtl838x-soc"; + model = "ZyXEL GS1900-24HP v2 Switch"; + + /* i2c of the left SFP cage: port 25 */ + i2c0: i2c-gpio-0 { + compatible = "i2c-gpio"; + sda-gpios = <&gpio1 24 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + scl-gpios = <&gpio1 25 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + i2c-gpio,delay-us = <2>; + #address-cells = <1>; + #size-cells = <0>; + }; + + sfp0: sfp-p25 { + compatible = "sff,sfp"; + i2c-bus = <&i2c0>; + los-gpio = <&gpio1 27 GPIO_ACTIVE_HIGH>; + tx-fault-gpio = <&gpio1 22 GPIO_ACTIVE_HIGH>; + mod-def0-gpio = <&gpio1 26 GPIO_ACTIVE_LOW>; + tx-disable-gpio = <&gpio1 23 GPIO_ACTIVE_HIGH>; + }; + + /* i2c of the right SFP cage: port 26 */ + i2c1: i2c-gpio-1 { + compatible = "i2c-gpio"; + sda-gpios = <&gpio1 30 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + scl-gpios = <&gpio1 31 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + i2c-gpio,delay-us = <2>; + #address-cells = <1>; + #size-cells = <0>; + }; + + sfp1: sfp-p26 { + compatible = "sff,sfp"; + i2c-bus = <&i2c1>; + los-gpio = <&gpio1 33 GPIO_ACTIVE_HIGH>; + tx-fault-gpio = <&gpio1 28 GPIO_ACTIVE_HIGH>; + mod-def0-gpio = <&gpio1 32 GPIO_ACTIVE_LOW>; + tx-disable-gpio = <&gpio1 29 GPIO_ACTIVE_HIGH>; + }; +}; + +&mdio { + EXTERNAL_PHY(0) + EXTERNAL_PHY(1) + EXTERNAL_PHY(2) + EXTERNAL_PHY(3) + EXTERNAL_PHY(4) + EXTERNAL_PHY(5) + EXTERNAL_PHY(6) + EXTERNAL_PHY(7) + + EXTERNAL_PHY(16) + EXTERNAL_PHY(17) + EXTERNAL_PHY(18) + EXTERNAL_PHY(19) + EXTERNAL_PHY(20) + EXTERNAL_PHY(21) + EXTERNAL_PHY(22) + EXTERNAL_PHY(23) + + INTERNAL_PHY(24) + INTERNAL_PHY(26) +}; + +&switch0 { + ports { + SWITCH_PORT(0, 1, qsgmii) + SWITCH_PORT(1, 2, qsgmii) + SWITCH_PORT(2, 3, qsgmii) + SWITCH_PORT(3, 4, qsgmii) + SWITCH_PORT(4, 5, qsgmii) + SWITCH_PORT(5, 6, qsgmii) + SWITCH_PORT(6, 7, qsgmii) + SWITCH_PORT(7, 8, qsgmii) + + SWITCH_PORT(8, 9, internal) + SWITCH_PORT(9, 10, internal) + SWITCH_PORT(10, 11, internal) + SWITCH_PORT(11, 12, internal) + SWITCH_PORT(12, 13, internal) + SWITCH_PORT(13, 14, internal) + SWITCH_PORT(14, 15, internal) + SWITCH_PORT(15, 16, internal) + + SWITCH_PORT(16, 17, qsgmii) + SWITCH_PORT(17, 18, qsgmii) + SWITCH_PORT(18, 19, qsgmii) + SWITCH_PORT(19, 20, qsgmii) + SWITCH_PORT(20, 21, qsgmii) + SWITCH_PORT(21, 22, qsgmii) + SWITCH_PORT(22, 23, qsgmii) + SWITCH_PORT(23, 24, qsgmii) + + + port@24 { + reg = <24>; + label = "lan25"; + phy-mode = "1000base-x"; + managed = "in-band-status"; + sfp = <&sfp0>; + }; + + port@26 { + reg = <26>; + label = "lan26"; + phy-mode = "1000base-x"; + managed = "in-band-status"; + sfp = <&sfp1>; + }; + }; +}; diff --git a/target/linux/realtek/dts-5.10/rtl838x.dtsi b/target/linux/realtek/dts-5.10/rtl838x.dtsi new file mode 100644 index 0000000000..b59b141f66 --- /dev/null +++ b/target/linux/realtek/dts-5.10/rtl838x.dtsi @@ -0,0 +1,188 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT + +/dts-v1/; + +#define STRINGIZE(s) #s +#define LAN_LABEL(p, s) STRINGIZE(p ## s) +#define SWITCH_PORT_LABEL(n) LAN_LABEL(lan, n) + +#define INTERNAL_PHY(n) \ + phy##n: ethernet-phy@##n { \ + reg = <##n>; \ + compatible = "ethernet-phy-ieee802.3-c22"; \ + phy-is-integrated; \ + }; + +#define EXTERNAL_PHY(n) \ + phy##n: ethernet-phy@##n { \ + reg = <##n>; \ + compatible = "ethernet-phy-ieee802.3-c22"; \ + }; + +#define EXTERNAL_SFP_PHY(n) \ + phy##n: ethernet-phy@##n { \ + compatible = "ethernet-phy-ieee802.3-c22"; \ + sfp; \ + media = "fibre"; \ + reg = <##n>; \ + }; + +#define SWITCH_PORT(n, s, m) \ + port@##n { \ + reg = <##n>; \ + label = SWITCH_PORT_LABEL(s) ; \ + phy-handle = <&phy##n>; \ + phy-mode = #m ; \ + }; + +#define SWITCH_SFP_PORT(n, s, m) \ + port@##n { \ + reg = <##n>; \ + label = SWITCH_PORT_LABEL(s) ; \ + phy-handle = <&phy##n>; \ + phy-mode = #m ; \ + fixed-link { \ + speed = <1000>; \ + full-duplex; \ + }; \ + }; + +/ { + #address-cells = <1>; + #size-cells = <1>; + + compatible = "realtek,rtl838x-soc"; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + frequency = <500000000>; + + cpu@0 { + compatible = "mips,mips4KEc"; + reg = <0>; + }; + }; + + chosen { + bootargs = "console=ttyS0,38400"; + }; + + cpuintc: cpuintc { + #address-cells = <0>; + #interrupt-cells = <1>; + interrupt-controller; + compatible = "mti,cpu-interrupt-controller"; + }; + + intc: rtlintc { + #address-cells = <0>; + #interrupt-cells = <1>; + interrupt-controller; + compatible = "realtek,rt8380-intc"; + reg = <0xb8003000 0x20>; + }; + + spi0: spi@b8001200 { + status = "okay"; + + compatible = "realtek,rtl838x-nor"; + reg = <0xb8001200 0x100>; + + #address-cells = <1>; + #size-cells = <0>; + }; + + uart0: uart@b8002000 { + status = "okay"; + + compatible = "ns16550a"; + reg = <0xb8002000 0x100>; + + clock-frequency = <200000000>; + + interrupt-parent = <&intc>; + interrupts = <31>; + + reg-io-width = <1>; + reg-shift = <2>; + fifo-size = <1>; + no-loopback-test; + }; + + uart1: uart@b8002100 { + pinctrl-names = "default"; + pinctrl-0 = <&enable_uart1>; + + status = "okay"; + + compatible = "ns16550a"; + reg = <0xb8002100 0x100>; + + clock-frequency = <200000000>; + + interrupt-parent = <&intc>; + interrupts = <30>; + + reg-io-width = <1>; + reg-shift = <2>; + fifo-size = <1>; + no-loopback-test; + }; + + gpio0: gpio-controller@b8003500 { + compatible = "realtek,rtl838x-gpio"; + reg = <0xb8003500 0x20>; + gpio-controller; + #gpio-cells = <2>; + interrupt-parent = <&intc>; + interrupts = <23>; + }; + + gpio1: rtl8231-gpio { + status = "disabled"; + compatible = "realtek,rtl8231-gpio"; + #gpio-cells = <2>; + indirect-access-bus-id = <0>; + gpio-controller; + }; + + pinmux: pinmux@bb001000 { + compatible = "pinctrl-single"; + reg = <0xbb001000 0x4>; + + pinctrl-single,bit-per-mux; + pinctrl-single,register-width = <32>; + pinctrl-single,function-mask = <0x1>; + #pinctrl-cells = <2>; + + enable_uart1: pinmux_enable_uart1 { + pinctrl-single,bits = <0x0 0x10 0x10>; + }; + }; + + ethernet0: ethernet@bb00a300 { + status = "okay"; + + compatible = "realtek,rtl838x-eth"; + reg = <0xbb00a300 0x100>; + interrupt-parent = <&intc>; + interrupts = <24>; + #interrupt-cells = <1>; + phy-mode = "internal"; + + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + + switch0: switch@bb000000 { + status = "okay"; + + interrupt-parent = <&intc>; + interrupts = <20>; + + compatible = "realtek,rtl83xx-switch"; + }; +}; diff --git a/target/linux/realtek/dts-5.10/rtl930x.dtsi b/target/linux/realtek/dts-5.10/rtl930x.dtsi new file mode 100644 index 0000000000..5d13fc31b3 --- /dev/null +++ b/target/linux/realtek/dts-5.10/rtl930x.dtsi @@ -0,0 +1,182 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT + +/dts-v1/; + +#define STRINGIZE(s) #s +#define LAN_LABEL(p, s) STRINGIZE(p ## s) +#define SWITCH_PORT_LABEL(n) LAN_LABEL(lan, n) + +#define INTERNAL_PHY(n) \ + phy##n: ethernet-phy@##n { \ + reg = <##n>; \ + compatible = "ethernet-phy-ieee802.3-c22"; \ + phy-is-integrated; \ + }; + +#define EXTERNAL_PHY(n) \ + phy##n: ethernet-phy@##n { \ + reg = <##n>; \ + compatible = "ethernet-phy-ieee802.3-c22"; \ + }; + +#define EXTERNAL_SFP_PHY(n) \ + phy##n: ethernet-phy@##n { \ + compatible = "ethernet-phy-ieee802.3-c22"; \ + sfp; \ + media = "fibre"; \ + reg = <##n>; \ + }; + +#define SWITCH_PORT(n, s, m) \ + port@##n { \ + reg = <##n>; \ + label = SWITCH_PORT_LABEL(s) ; \ + phy-handle = <&phy##n>; \ + phy-mode = #m ; \ + }; + +#define SWITCH_SFP_PORT(n, s, m) \ + port@##n { \ + reg = <##n>; \ + label = SWITCH_PORT_LABEL(s) ; \ + phy-handle = <&phy##n>; \ + phy-mode = #m ; \ + fixed-link { \ + speed = <1000>; \ + full-duplex; \ + }; \ + }; + +/ { + #address-cells = <1>; + #size-cells = <1>; + + compatible = "realtek,rtl838x-soc"; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + frequency = <800000000>; + + cpu@0 { + compatible = "mips,mips34Kc"; + reg = <0>; + }; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x8000000>; + }; + + chosen { + bootargs = "console=ttyS0,38400"; + }; + + cpuintc: cpuintc { + #address-cells = <0>; + #interrupt-cells = <1>; + interrupt-controller; + compatible = "mti,cpu-interrupt-controller"; + }; + + intc: rtlintc { + #address-cells = <0>; + #interrupt-cells = <1>; + interrupt-controller; + compatible = "realtek,rt9300-intc"; + reg = <0xb8003000 0x20>; + }; + + osc: oscillator { + compatible = "fixed-clock"; + #clock-cells = <1>; + clock-frequency = <175000000>; + clock-output-names = "osc"; + }; + + timer: timer@b8003200 { + compatible = "realtek,rtl9300-timer"; + reg = <0xb8003200 0x60>; + interrupt-parent = <&intc>; + interrupts = <8>; + interrupt-names = "ostimer"; + clocks = <&osc 0>; + }; + + spi0: spi@b8001200 { + status = "okay"; + + compatible = "realtek,rtl838x-nor"; + reg = <0xb8001200 0x100>; + + #address-cells = <1>; + #size-cells = <0>; + }; + + uart0: uart@b8002000 { + compatible = "ns16550a"; + reg = <0xb8002000 0x100>; + + clock-frequency = <175000000>; + + interrupt-parent = <&intc>; + interrupts = <30>; + + reg-io-width = <1>; + reg-shift = <2>; + fifo-size = <1>; + no-loopback-test; + + status = "okay"; + }; + + uart1: uart@b8002100 { + compatible = "ns16550a"; + reg = <0xb8002100 0x100>; + + clock-frequency = <175000000>; + + interrupt-parent = <&intc>; + interrupts = <31>; + + reg-io-width = <1>; + reg-shift = <2>; + fifo-size = <1>; + no-loopback-test; + + status = "okay"; + }; + + gpio0: gpio-controller@b8003500 { + compatible = "realtek,rtl838x-gpio"; + reg = <0xb8003500 0x20>; + gpio-controller; + #gpio-cells = <2>; + interrupt-parent = <&intc>; + interrupts = <31>; + }; + + ethernet0: ethernet@bb00a300 { + status = "okay"; + compatible = "realtek,rtl838x-eth"; + reg = <0xbb00a300 0x100>; + interrupt-parent = <&intc>; + interrupts = <24>; + #interrupt-cells = <1>; + phy-mode = "internal"; + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + + switch0: switch@bb000000 { + status = "okay"; + + interrupt-parent = <&intc>; + interrupts = <20>; + + compatible = "realtek,rtl83xx-switch"; + }; +}; diff --git a/target/linux/realtek/dts-5.4/rtl8380_netgear_gigabit.dtsi b/target/linux/realtek/dts-5.4/rtl8380_netgear_gigabit.dtsi new file mode 100644 index 0000000000..8ba66d6023 --- /dev/null +++ b/target/linux/realtek/dts-5.4/rtl8380_netgear_gigabit.dtsi @@ -0,0 +1,78 @@ +// SPDX-License-Identifier: GPL-2.0-or-later + +#include "rtl838x.dtsi" + +#include +#include + +/ { + compatible = "realtek,rtl838x-soc"; + + chosen { + bootargs = "console=ttyS0,115200"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x8000000>; + }; + + keys { + compatible = "gpio-keys-polled"; + poll-interval = <20>; + + mode { + label = "reset"; + gpios = <&gpio0 24 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + }; +}; + +&gpio0 { + indirect-access-bus-id = <0>; +}; + +ðernet0 { + mdio: mdio-bus { + compatible = "realtek,rtl838x-mdio"; + regmap = <ðernet0>; + #address-cells = <1>; + #size-cells = <0>; + + INTERNAL_PHY(8) + INTERNAL_PHY(9) + INTERNAL_PHY(10) + INTERNAL_PHY(11) + INTERNAL_PHY(12) + INTERNAL_PHY(13) + INTERNAL_PHY(14) + INTERNAL_PHY(15) + }; +}; + +&switch0 { + ports { + #address-cells = <1>; + #size-cells = <0>; + + SWITCH_PORT(8, 1, internal) + SWITCH_PORT(9, 2, internal) + SWITCH_PORT(10, 3, internal) + SWITCH_PORT(11, 4, internal) + SWITCH_PORT(12, 5, internal) + SWITCH_PORT(13, 6, internal) + SWITCH_PORT(14, 7, internal) + SWITCH_PORT(15, 8, internal) + + port@28 { + ethernet = <ðernet0>; + reg = <28>; + phy-mode = "internal"; + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + }; +}; diff --git a/target/linux/realtek/dts-5.4/rtl8380_netgear_gigabit_1xx.dtsi b/target/linux/realtek/dts-5.4/rtl8380_netgear_gigabit_1xx.dtsi new file mode 100644 index 0000000000..7eccfcb5a2 --- /dev/null +++ b/target/linux/realtek/dts-5.4/rtl8380_netgear_gigabit_1xx.dtsi @@ -0,0 +1,61 @@ +// SPDX-License-Identifier: GPL-2.0-or-later + +#include "rtl8380_netgear_gigabit.dtsi" + +&spi0 { + status = "okay"; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <50000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "u-boot"; + reg = <0x0000000 0x00e0000>; + read-only; + }; + + partition@e0000 { + label = "u-boot-env"; + reg = <0x00e0000 0x0010000>; + read-only; + }; + + partition@f0000 { + label = "u-boot-env2"; + reg = <0x00f0000 0x0010000>; + }; + + partition@100000 { + label = "jffs"; + reg = <0x0100000 0x0100000>; + read-only; + }; + + partition@200000 { + label = "jffs2"; + reg = <0x0200000 0x0100000>; + read-only; + }; + + partition@300000 { + label = "firmware"; + compatible = "openwrt,uimage", "denx,uimage"; + openwrt,ih-magic = <0x4e474520>; + reg = <0x0300000 0x0e80000>; + }; + + partition@1180000 { + label = "runtime2"; + reg = <0x1180000 0x0e80000>; + read-only; + }; + }; + }; +}; diff --git a/target/linux/realtek/dts-5.4/rtl8380_netgear_gigabit_3xx.dtsi b/target/linux/realtek/dts-5.4/rtl8380_netgear_gigabit_3xx.dtsi new file mode 100644 index 0000000000..efb146a25a --- /dev/null +++ b/target/linux/realtek/dts-5.4/rtl8380_netgear_gigabit_3xx.dtsi @@ -0,0 +1,61 @@ +// SPDX-License-Identifier: GPL-2.0-or-later + +#include "rtl8380_netgear_gigabit.dtsi" + +&spi0 { + status = "okay"; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <50000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "u-boot"; + reg = <0x0000000 0x00e0000>; + read-only; + }; + + partition@e0000 { + label = "u-boot-env"; + reg = <0x00e0000 0x0010000>; + read-only; + }; + + partition@f0000 { + label = "u-boot-env2"; + reg = <0x00f0000 0x0010000>; + }; + + partition@100000 { + label = "jffs"; + reg = <0x0100000 0x0100000>; + read-only; + }; + + partition@200000 { + label = "jffs2"; + reg = <0x0200000 0x0100000>; + read-only; + }; + + partition@300000 { + label = "firmware"; + compatible = "openwrt,uimage", "denx,uimage"; + openwrt,ih-magic = <0x4e474335>; + reg = <0x0300000 0x0e80000>; + }; + + partition@1180000 { + label = "runtime2"; + reg = <0x1180000 0x0e80000>; + read-only; + }; + }; + }; +}; diff --git a/target/linux/realtek/dts-5.4/rtl8380_netgear_gs108t-v3.dts b/target/linux/realtek/dts-5.4/rtl8380_netgear_gs108t-v3.dts new file mode 100644 index 0000000000..b701e88d1a --- /dev/null +++ b/target/linux/realtek/dts-5.4/rtl8380_netgear_gs108t-v3.dts @@ -0,0 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0-or-later + +#include "rtl8380_netgear_gigabit_1xx.dtsi" + +/ { + compatible = "netgear,gs108t-v3", "realtek,rtl838x-soc"; + model = "Netgear GS108T v3"; +}; diff --git a/target/linux/realtek/dts-5.4/rtl8380_netgear_gs110tpp-v1.dts b/target/linux/realtek/dts-5.4/rtl8380_netgear_gs110tpp-v1.dts new file mode 100644 index 0000000000..646f4ed516 --- /dev/null +++ b/target/linux/realtek/dts-5.4/rtl8380_netgear_gs110tpp-v1.dts @@ -0,0 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0-or-later + +#include "rtl8380_netgear_gigabit_1xx.dtsi" + +/ { + compatible = "netgear,gs110tpp-v1", "realtek,rtl838x-soc"; + model = "Netgear GS110TPP v1"; +}; diff --git a/target/linux/realtek/dts-5.4/rtl8380_netgear_gs308t-v1.dts b/target/linux/realtek/dts-5.4/rtl8380_netgear_gs308t-v1.dts new file mode 100644 index 0000000000..016ed8beb6 --- /dev/null +++ b/target/linux/realtek/dts-5.4/rtl8380_netgear_gs308t-v1.dts @@ -0,0 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0-or-later + +#include "rtl8380_netgear_gigabit_3xx.dtsi" + +/ { + compatible = "netgear,gs308t-v1", "realtek,rtl838x-soc"; + model = "Netgear GS308T v1"; +}; diff --git a/target/linux/realtek/dts-5.4/rtl8380_netgear_gs310tp-v1.dts b/target/linux/realtek/dts-5.4/rtl8380_netgear_gs310tp-v1.dts new file mode 100644 index 0000000000..e3f59bde69 --- /dev/null +++ b/target/linux/realtek/dts-5.4/rtl8380_netgear_gs310tp-v1.dts @@ -0,0 +1,21 @@ +// SPDX-License-Identifier: GPL-2.0-or-later + +#include "rtl8380_netgear_gigabit_3xx.dtsi" + +/ { + compatible = "netgear,gs310tp-v1", "realtek,rtl838x-soc"; + model = "Netgear GS310TP v1"; + +}; + +&mdio { + INTERNAL_PHY(24) + INTERNAL_PHY(26) +}; + +&switch0 { + ports { + SWITCH_SFP_PORT(24, 9, rgmii-id) + SWITCH_SFP_PORT(26, 10, rgmii-id) + }; +}; diff --git a/target/linux/realtek/dts-5.4/rtl8380_zyxel_gs1900-10hp.dts b/target/linux/realtek/dts-5.4/rtl8380_zyxel_gs1900-10hp.dts new file mode 100644 index 0000000000..c16028788e --- /dev/null +++ b/target/linux/realtek/dts-5.4/rtl8380_zyxel_gs1900-10hp.dts @@ -0,0 +1,71 @@ +// SPDX-License-Identifier: GPL-2.0-or-later + +#include "rtl8380_zyxel_gs1900.dtsi" + +/ { + compatible = "zyxel,gs1900-10hp", "realtek,rtl838x-soc"; + model = "ZyXEL GS1900-10HP Switch"; + + /* i2c of the left SFP cage: port 9 */ + i2c0: i2c-gpio-0 { + compatible = "i2c-gpio"; + sda-gpios = <&gpio1 24 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + scl-gpios = <&gpio1 25 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + i2c-gpio,delay-us = <2>; + #address-cells = <1>; + #size-cells = <0>; + }; + + sfp0: sfp-p9 { + compatible = "sff,sfp"; + i2c-bus = <&i2c0>; + los-gpio = <&gpio1 27 GPIO_ACTIVE_HIGH>; + tx-fault-gpio = <&gpio1 22 GPIO_ACTIVE_HIGH>; + mod-def0-gpio = <&gpio1 26 GPIO_ACTIVE_LOW>; + tx-disable-gpio = <&gpio1 23 GPIO_ACTIVE_HIGH>; + }; + + /* i2c of the right SFP cage: port 10 */ + i2c1: i2c-gpio-1 { + compatible = "i2c-gpio"; + sda-gpios = <&gpio1 30 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + scl-gpios = <&gpio1 31 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + i2c-gpio,delay-us = <2>; + #address-cells = <1>; + #size-cells = <0>; + }; + + sfp1: sfp-p10 { + compatible = "sff,sfp"; + i2c-bus = <&i2c1>; + los-gpio = <&gpio1 33 GPIO_ACTIVE_HIGH>; + tx-fault-gpio = <&gpio1 28 GPIO_ACTIVE_HIGH>; + mod-def0-gpio = <&gpio1 32 GPIO_ACTIVE_LOW>; + tx-disable-gpio = <&gpio1 29 GPIO_ACTIVE_HIGH>; + }; +}; + +&mdio { + INTERNAL_PHY(24) + INTERNAL_PHY(26) +}; + +&switch0 { + ports { + port@24 { + reg = <24>; + label = "lan9"; + phy-mode = "1000base-x"; + managed = "in-band-status"; + sfp = <&sfp0>; + }; + + port@26 { + reg = <26>; + label = "lan10"; + phy-mode = "1000base-x"; + managed = "in-band-status"; + sfp = <&sfp1>; + }; + }; +}; diff --git a/target/linux/realtek/dts-5.4/rtl8380_zyxel_gs1900-8.dts b/target/linux/realtek/dts-5.4/rtl8380_zyxel_gs1900-8.dts new file mode 100644 index 0000000000..e9c5efe603 --- /dev/null +++ b/target/linux/realtek/dts-5.4/rtl8380_zyxel_gs1900-8.dts @@ -0,0 +1,12 @@ +// SPDX-License-Identifier: GPL-2.0-or-later + +#include "rtl8380_zyxel_gs1900.dtsi" + +/ { + compatible = "zyxel,gs1900-8", "realtek,rtl838x-soc"; + model = "ZyXEL GS1900-8 Switch"; +}; + +&gpio1 { + /delete-node/ poe_enable; +}; diff --git a/target/linux/realtek/dts-5.4/rtl8380_zyxel_gs1900-8hp-v1.dts b/target/linux/realtek/dts-5.4/rtl8380_zyxel_gs1900-8hp-v1.dts new file mode 100644 index 0000000000..0d9b7c97c0 --- /dev/null +++ b/target/linux/realtek/dts-5.4/rtl8380_zyxel_gs1900-8hp-v1.dts @@ -0,0 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0-or-later + +#include "rtl8380_zyxel_gs1900.dtsi" + +/ { + compatible = "zyxel,gs1900-8hp-v1", "realtek,rtl838x-soc"; + model = "ZyXEL GS1900-8HP v1 Switch"; +}; diff --git a/target/linux/realtek/dts-5.4/rtl8380_zyxel_gs1900-8hp-v2.dts b/target/linux/realtek/dts-5.4/rtl8380_zyxel_gs1900-8hp-v2.dts new file mode 100644 index 0000000000..cdc4aed6d1 --- /dev/null +++ b/target/linux/realtek/dts-5.4/rtl8380_zyxel_gs1900-8hp-v2.dts @@ -0,0 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0-or-later + +#include "rtl8380_zyxel_gs1900.dtsi" + +/ { + compatible = "zyxel,gs1900-8hp-v2", "realtek,rtl838x-soc"; + model = "ZyXEL GS1900-8HP v2 Switch"; +}; diff --git a/target/linux/realtek/dts-5.4/rtl8380_zyxel_gs1900.dtsi b/target/linux/realtek/dts-5.4/rtl8380_zyxel_gs1900.dtsi new file mode 100644 index 0000000000..d61ac3b2b8 --- /dev/null +++ b/target/linux/realtek/dts-5.4/rtl8380_zyxel_gs1900.dtsi @@ -0,0 +1,148 @@ +// SPDX-License-Identifier: GPL-2.0-or-later + +#include "rtl838x.dtsi" + +#include +#include + +/ { + aliases { + led-boot = &led_sys; + led-failsafe = &led_sys; + led-running = &led_sys; + led-upgrade = &led_sys; + }; + + chosen { + bootargs = "console=ttyS0,115200"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x8000000>; + }; + + gpio1: rtl8231-gpio { + status = "okay"; + + poe_enable { + gpio-hog; + gpios = <13 0>; + output-high; + }; + }; + + keys { + compatible = "gpio-keys-polled"; + poll-interval = <20>; + + reset { + label = "reset"; + gpios = <&gpio1 3 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + }; + + leds { + compatible = "gpio-leds"; + + led_sys: sys { + label = "green:sys"; + gpios = <&gpio0 47 GPIO_ACTIVE_HIGH>; + }; + }; +}; + +&spi0 { + status = "okay"; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <10000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x40000>; + read-only; + }; + partition@40000 { + label = "u-boot-env"; + reg = <0x40000 0x10000>; + read-only; + }; + partition@50000 { + label = "u-boot-env2"; + reg = <0x50000 0x10000>; + }; + partition@60000 { + label = "jffs"; + reg = <0x60000 0x100000>; + }; + partition@160000 { + label = "jffs2"; + reg = <0x160000 0x100000>; + }; + partition@b260000 { + label = "firmware"; + reg = <0x260000 0x6d0000>; + compatible = "openwrt,uimage", "denx,uimage"; + openwrt,ih-magic = <0x83800000>; + }; + partition@930000 { + label = "runtime2"; + reg = <0x930000 0x6d0000>; + }; + }; + }; +}; + +ðernet0 { + mdio: mdio-bus { + compatible = "realtek,rtl838x-mdio"; + regmap = <ðernet0>; + #address-cells = <1>; + #size-cells = <0>; + + INTERNAL_PHY(8) + INTERNAL_PHY(9) + INTERNAL_PHY(10) + INTERNAL_PHY(11) + INTERNAL_PHY(12) + INTERNAL_PHY(13) + INTERNAL_PHY(14) + INTERNAL_PHY(15) + }; +}; + +&switch0 { + ports { + #address-cells = <1>; + #size-cells = <0>; + + SWITCH_PORT(8, 1, internal) + SWITCH_PORT(9, 2, internal) + SWITCH_PORT(10, 3, internal) + SWITCH_PORT(11, 4, internal) + SWITCH_PORT(12, 5, internal) + SWITCH_PORT(13, 6, internal) + SWITCH_PORT(14, 7, internal) + SWITCH_PORT(15, 8, internal) + + port@28 { + ethernet = <ðernet0>; + reg = <28>; + phy-mode = "internal"; + + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + }; +}; diff --git a/target/linux/realtek/dts-5.4/rtl8382_allnet_all-sg8208m.dts b/target/linux/realtek/dts-5.4/rtl8382_allnet_all-sg8208m.dts new file mode 100644 index 0000000000..fdcc01fdac --- /dev/null +++ b/target/linux/realtek/dts-5.4/rtl8382_allnet_all-sg8208m.dts @@ -0,0 +1,146 @@ +// SPDX-License-Identifier: GPL-2.0-or-later + +#include "rtl838x.dtsi" + +#include +#include + +/ { + compatible = "allnet,all-sg8208m", "realtek,rtl838x-soc"; + model = "ALLNET ALL-SG8208M"; + + aliases { + led-boot = &led_sys; + led-failsafe = &led_sys; + led-running = &led_sys; + led-upgrade = &led_sys; + }; + + chosen { + bootargs = "console=ttyS0,115200"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x8000000>; + }; + + keys { + compatible = "gpio-keys-polled"; + poll-interval = <20>; + + reset { + label = "reset"; + gpios = <&gpio0 67 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + }; + + leds { + compatible = "gpio-leds"; + + led_sys: sys { + label = "green:sys"; + gpios = <&gpio0 47 GPIO_ACTIVE_HIGH>; + }; + // GPIO 25: power on/off all port leds + }; +}; + +&gpio0 { + indirect-access-bus-id = <0>; +}; + +&spi0 { + status = "okay"; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <10000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x80000>; + read-only; + }; + + partition@80000 { + label = "u-boot-env"; + reg = <0x80000 0x10000>; + read-only; + }; + + partition@90000 { + label = "u-boot-env2"; + reg = <0x90000 0x10000>; + }; + + partition@a0000 { + label = "jffs"; + reg = <0xa0000 0x100000>; + }; + + partition@1a0000 { + label = "jffs2"; + reg = <0x1a0000 0x100000>; + }; + + partition@2a0000 { + label = "firmware"; + reg = <0x2a0000 0xd60000>; + compatible = "openwrt,uimage", "denx,uimage"; + openwrt,ih-magic = <0x00000006>; + }; + }; + }; +}; + +ðernet0 { + mdio: mdio-bus { + compatible = "realtek,rtl838x-mdio"; + regmap = <ðernet0>; + #address-cells = <1>; + #size-cells = <0>; + + INTERNAL_PHY(8) + INTERNAL_PHY(9) + INTERNAL_PHY(10) + INTERNAL_PHY(11) + INTERNAL_PHY(12) + INTERNAL_PHY(13) + INTERNAL_PHY(14) + INTERNAL_PHY(15) + }; +}; + +&switch0 { + ports { + #address-cells = <1>; + #size-cells = <0>; + + SWITCH_PORT(8, 1, internal) + SWITCH_PORT(9, 2, internal) + SWITCH_PORT(10, 3, internal) + SWITCH_PORT(11, 4, internal) + SWITCH_PORT(12, 5, internal) + SWITCH_PORT(13, 6, internal) + SWITCH_PORT(14, 7, internal) + SWITCH_PORT(15, 8, internal) + + port@28 { + ethernet = <ðernet0>; + reg = <28>; + phy-mode = "internal"; + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + }; +}; diff --git a/target/linux/realtek/dts-5.4/rtl8382_d-link_dgs-1210-10p.dts b/target/linux/realtek/dts-5.4/rtl8382_d-link_dgs-1210-10p.dts new file mode 100644 index 0000000000..e2f5e7a4c0 --- /dev/null +++ b/target/linux/realtek/dts-5.4/rtl8382_d-link_dgs-1210-10p.dts @@ -0,0 +1,152 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT + +#include "rtl838x.dtsi" + +#include +#include + +/ { + compatible = "d-link,dgs-1210-10p", "realtek,rtl838x-soc"; + model = "D-Link DGS-1210-10P"; + + aliases { + led-boot = &led_power; + led-failsafe = &led_power; + led-running = &led_power; + led-upgrade = &led_power; + }; + + chosen { + bootargs = "console=ttyS0,115200"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x8000000>; + }; + + leds { + compatible = "gpio-leds"; + + led_power: power { + // GPIO 24 seems to provide power to the leds + label = "green:power"; + gpios = <&gpio0 47 GPIO_ACTIVE_LOW>; + }; + }; + + keys { + compatible = "gpio-keys-polled"; + poll-interval = <20>; + + mode { + label = "reset"; + gpios = <&gpio0 94 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + }; +}; + + +&gpio0 { + indirect-access-bus-id = <0>; +}; + +&spi0 { + status = "okay"; + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <10000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "u-boot"; + reg = <0x00000000 0x80000>; + read-only; + }; + partition@80000 { + label = "u-boot-env"; + reg = <0x00080000 0x40000>; + read-only; + }; + partition@c0000 { + label = "u-boot-env2"; + reg = <0x000c0000 0x40000>; + }; + partition@280000 { + label = "firmware"; + compatible = "denx,uimage"; + reg = <0x00100000 0xd80000>; + }; + partition@be80000 { + label = "kernel2"; + reg = <0x00e80000 0x180000>; + }; + partition@1000000 { + label = "sysinfo"; + reg = <0x01000000 0x40000>; + }; + partition@1040000 { + label = "rootfs2"; + reg = <0x01040000 0xc00000>; + }; + partition@1c40000 { + label = "jffs2"; + reg = <0x01c40000 0x3c0000>; + }; + }; + }; +}; + +ðernet0 { + mdio: mdio-bus { + compatible = "realtek,rtl838x-mdio"; + regmap = <ðernet0>; + #address-cells = <1>; + #size-cells = <0>; + + INTERNAL_PHY(8) + INTERNAL_PHY(9) + INTERNAL_PHY(10) + INTERNAL_PHY(11) + INTERNAL_PHY(12) + INTERNAL_PHY(13) + INTERNAL_PHY(14) + INTERNAL_PHY(15) + INTERNAL_PHY(24) + INTERNAL_PHY(26) + }; +}; + +&switch0 { + ports { + #address-cells = <1>; + #size-cells = <0>; + + SWITCH_PORT(8, 1, internal) + SWITCH_PORT(9, 2, internal) + SWITCH_PORT(10, 3, internal) + SWITCH_PORT(11, 4, internal) + SWITCH_PORT(12, 5, internal) + SWITCH_PORT(13, 6, internal) + SWITCH_PORT(14, 7, internal) + SWITCH_PORT(15, 8, internal) + SWITCH_SFP_PORT(24, 9, rgmii-id) + SWITCH_SFP_PORT(26, 10, rgmii-id) + + port@28 { + ethernet = <ðernet0>; + reg = <28>; + phy-mode = "internal"; + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + }; +}; diff --git a/target/linux/realtek/dts-5.4/rtl8382_d-link_dgs-1210-16.dts b/target/linux/realtek/dts-5.4/rtl8382_d-link_dgs-1210-16.dts new file mode 100644 index 0000000000..ac51185ed0 --- /dev/null +++ b/target/linux/realtek/dts-5.4/rtl8382_d-link_dgs-1210-16.dts @@ -0,0 +1,80 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT + +#include "rtl8382_d-link_dgs-1210.dtsi" + +/ { + compatible = "d-link,dgs-1210-16", "realtek,rtl838x-soc"; + model = "D-Link DGS-1210-16"; +}; + +ðernet0 { + mdio: mdio-bus { + compatible = "realtek,rtl838x-mdio"; + regmap = <ðernet0>; + #address-cells = <1>; + #size-cells = <0>; + + EXTERNAL_PHY(0) + EXTERNAL_PHY(1) + EXTERNAL_PHY(2) + EXTERNAL_PHY(3) + EXTERNAL_PHY(4) + EXTERNAL_PHY(5) + EXTERNAL_PHY(6) + EXTERNAL_PHY(7) + + INTERNAL_PHY(8) + INTERNAL_PHY(9) + INTERNAL_PHY(10) + INTERNAL_PHY(11) + INTERNAL_PHY(12) + INTERNAL_PHY(13) + INTERNAL_PHY(14) + INTERNAL_PHY(15) + + EXTERNAL_SFP_PHY(24) + EXTERNAL_SFP_PHY(25) + EXTERNAL_SFP_PHY(26) + EXTERNAL_SFP_PHY(27) + }; +}; + +&switch0 { + ports { + #address-cells = <1>; + #size-cells = <0>; + + SWITCH_PORT(0, 1, qsgmii) + SWITCH_PORT(1, 2, qsgmii) + SWITCH_PORT(2, 3, qsgmii) + SWITCH_PORT(3, 4, qsgmii) + SWITCH_PORT(4, 5, qsgmii) + SWITCH_PORT(5, 6, qsgmii) + SWITCH_PORT(6, 7, qsgmii) + SWITCH_PORT(7, 8, qsgmii) + + SWITCH_PORT(8, 9, internal) + SWITCH_PORT(9, 10, internal) + SWITCH_PORT(10, 11, internal) + SWITCH_PORT(11, 12, internal) + SWITCH_PORT(12, 13, internal) + SWITCH_PORT(13, 14, internal) + SWITCH_PORT(14, 15, internal) + SWITCH_PORT(15, 16, internal) + + SWITCH_PORT(24, 17, qsgmii) + SWITCH_PORT(25, 18, qsgmii) + SWITCH_PORT(26, 19, qsgmii) + SWITCH_PORT(27, 20, qsgmii) + + port@28 { + ethernet = <ðernet0>; + reg = <28>; + phy-mode = "internal"; + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + }; +}; diff --git a/target/linux/realtek/dts-5.4/rtl8382_d-link_dgs-1210-28.dts b/target/linux/realtek/dts-5.4/rtl8382_d-link_dgs-1210-28.dts new file mode 100644 index 0000000000..edd4fb140f --- /dev/null +++ b/target/linux/realtek/dts-5.4/rtl8382_d-link_dgs-1210-28.dts @@ -0,0 +1,98 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT + +#include "rtl8382_d-link_dgs-1210.dtsi" + +/ { + compatible = "d-link,dgs-1210-28", "realtek,rtl838x-soc"; + model = "D-Link DGS-1210-28"; +}; + +ðernet0 { + mdio: mdio-bus { + compatible = "realtek,rtl838x-mdio"; + regmap = <ðernet0>; + #address-cells = <1>; + #size-cells = <0>; + + EXTERNAL_PHY(0) + EXTERNAL_PHY(1) + EXTERNAL_PHY(2) + EXTERNAL_PHY(3) + EXTERNAL_PHY(4) + EXTERNAL_PHY(5) + EXTERNAL_PHY(6) + EXTERNAL_PHY(7) + + INTERNAL_PHY(8) + INTERNAL_PHY(9) + INTERNAL_PHY(10) + INTERNAL_PHY(11) + INTERNAL_PHY(12) + INTERNAL_PHY(13) + INTERNAL_PHY(14) + INTERNAL_PHY(15) + + EXTERNAL_PHY(16) + EXTERNAL_PHY(17) + EXTERNAL_PHY(18) + EXTERNAL_PHY(19) + EXTERNAL_PHY(20) + EXTERNAL_PHY(21) + EXTERNAL_PHY(22) + EXTERNAL_PHY(23) + + EXTERNAL_SFP_PHY(24) + EXTERNAL_SFP_PHY(25) + EXTERNAL_SFP_PHY(26) + EXTERNAL_SFP_PHY(27) + }; +}; + +&switch0 { + ports { + #address-cells = <1>; + #size-cells = <0>; + + SWITCH_PORT(0, 1, qsgmii) + SWITCH_PORT(1, 2, qsgmii) + SWITCH_PORT(2, 3, qsgmii) + SWITCH_PORT(3, 4, qsgmii) + SWITCH_PORT(4, 5, qsgmii) + SWITCH_PORT(5, 6, qsgmii) + SWITCH_PORT(6, 7, qsgmii) + SWITCH_PORT(7, 8, qsgmii) + + SWITCH_PORT(8, 9, internal) + SWITCH_PORT(9, 10, internal) + SWITCH_PORT(10, 11, internal) + SWITCH_PORT(11, 12, internal) + SWITCH_PORT(12, 13, internal) + SWITCH_PORT(13, 14, internal) + SWITCH_PORT(14, 15, internal) + SWITCH_PORT(15, 16, internal) + + SWITCH_PORT(16, 17, qsgmii) + SWITCH_PORT(17, 18, qsgmii) + SWITCH_PORT(18, 19, qsgmii) + SWITCH_PORT(19, 20, qsgmii) + SWITCH_PORT(20, 21, qsgmii) + SWITCH_PORT(21, 22, qsgmii) + SWITCH_PORT(22, 23, qsgmii) + SWITCH_PORT(23, 24, qsgmii) + + SWITCH_PORT(24, 25, qsgmii) + SWITCH_PORT(25, 26, qsgmii) + SWITCH_PORT(26, 27, qsgmii) + SWITCH_PORT(27, 28, qsgmii) + + port@28 { + ethernet = <ðernet0>; + reg = <28>; + phy-mode = "internal"; + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + }; +}; diff --git a/target/linux/realtek/dts-5.4/rtl8382_d-link_dgs-1210.dtsi b/target/linux/realtek/dts-5.4/rtl8382_d-link_dgs-1210.dtsi new file mode 100644 index 0000000000..a14738c8a9 --- /dev/null +++ b/target/linux/realtek/dts-5.4/rtl8382_d-link_dgs-1210.dtsi @@ -0,0 +1,88 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT + +#include "rtl838x.dtsi" + +#include +#include + +/ { + aliases { + led-boot = &led_power; + led-failsafe = &led_power; + led-running = &led_power; + led-upgrade = &led_power; + }; + + chosen { + bootargs = "console=ttyS0,115200"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x8000000>; + }; + + leds { + compatible = "gpio-leds"; + + led_power: power { + label = "green:power"; + gpios = <&gpio0 24 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&gpio0 { + indirect-access-bus-id = <0>; +}; + +&spi0 { + status = "okay"; + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <10000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "u-boot"; + reg = <0x00000000 0x80000>; + read-only; + }; + partition@80000 { + label = "u-boot-env"; + reg = <0x00080000 0x40000>; + read-only; + }; + partition@c0000 { + label = "u-boot-env2"; + reg = <0x000c0000 0x40000>; + }; + partition@280000 { + label = "firmware"; + compatible = "denx,uimage"; + reg = <0x00100000 0xd80000>; + }; + partition@be80000 { + label = "kernel2"; + reg = <0x00e80000 0x180000>; + }; + partition@1000000 { + label = "sysinfo"; + reg = <0x01000000 0x40000>; + }; + partition@1040000 { + label = "rootfs2"; + reg = <0x01040000 0xc00000>; + }; + partition@1c40000 { + label = "jffs2"; + reg = <0x01c40000 0x3c0000>; + }; + }; + }; +}; diff --git a/target/linux/realtek/dts-5.4/rtl8382_inaba_aml2-17gp.dts b/target/linux/realtek/dts-5.4/rtl8382_inaba_aml2-17gp.dts new file mode 100644 index 0000000000..87761ac462 --- /dev/null +++ b/target/linux/realtek/dts-5.4/rtl8382_inaba_aml2-17gp.dts @@ -0,0 +1,164 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT + +#include "rtl838x.dtsi" + +#include +#include + +/ { + compatible = "inaba,aml2-17gp", "realtek,rtl838x-soc"; + model = "INABA Abaniact AML2-17GP"; + + chosen { + bootargs = "console=ttyS0,115200"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x8000000>; + }; + + keys { + compatible = "gpio-keys-polled"; + poll-interval = <20>; + + reset { + label = "reset"; + gpios = <&gpio0 24 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + }; +}; + +&gpio0 { + indirect-access-bus-id = <0>; +}; + +&spi0 { + status = "okay"; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <10000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x80000>; + read-only; + }; + + partition@80000 { + label = "u-boot-env"; + reg = <0x80000 0x10000>; + read-only; + }; + + partition@90000 { + label = "u-boot-env2"; + reg = <0x90000 0x10000>; + }; + + partition@a0000 { + label = "jffs2_cfg"; + reg = <0xa0000 0x400000>; + read-only; + }; + + partition@4a0000 { + label = "jffs2_log"; + reg = <0x4a0000 0x100000>; + read-only; + }; + + partition@5a0000 { + compatible = "openwrt,uimage", "denx,uimage"; + label = "firmware"; + reg = <0x5a0000 0xd30000>; + openwrt,ih-magic = <0x83800000>; + }; + + partition@12d0000 { + label = "runtime2"; + reg = <0x12d0000 0xd30000>; + }; + }; + }; +}; + +ðernet0 { + mdio-bus { + compatible = "realtek,rtl838x-mdio"; + regmap = <ðernet0>; + #address-cells = <1>; + #size-cells = <0>; + + INTERNAL_PHY(8) + INTERNAL_PHY(9) + INTERNAL_PHY(10) + INTERNAL_PHY(11) + INTERNAL_PHY(12) + INTERNAL_PHY(13) + INTERNAL_PHY(14) + INTERNAL_PHY(15) + + EXTERNAL_PHY(16) + EXTERNAL_PHY(17) + EXTERNAL_PHY(18) + EXTERNAL_PHY(19) + EXTERNAL_PHY(20) + EXTERNAL_PHY(21) + EXTERNAL_PHY(22) + EXTERNAL_PHY(23) + + EXTERNAL_PHY(24) + }; +}; + +&switch0 { + ports { + #address-cells = <1>; + #size-cells = <0>; + + SWITCH_PORT(8, 1, internal) + SWITCH_PORT(9, 2, internal) + SWITCH_PORT(10, 3, internal) + SWITCH_PORT(11, 4, internal) + SWITCH_PORT(12, 5, internal) + SWITCH_PORT(13, 6, internal) + SWITCH_PORT(14, 7, internal) + SWITCH_PORT(15, 8, internal) + + SWITCH_PORT(16, 9, qsgmii) + SWITCH_PORT(17, 10, qsgmii) + SWITCH_PORT(18, 11, qsgmii) + SWITCH_PORT(19, 12, qsgmii) + SWITCH_PORT(20, 13, qsgmii) + SWITCH_PORT(21, 14, qsgmii) + SWITCH_PORT(22, 15, qsgmii) + SWITCH_PORT(23, 16, qsgmii) + + port@24 { + reg = <24>; + label = "wan"; + phy-handle = <&phy24>; + phy-mode = "qsgmii"; + }; + + port@28 { + ethernet = <ðernet0>; + reg = <28>; + phy-mode = "internal"; + + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + }; +}; diff --git a/target/linux/realtek/dts-5.4/rtl8382_zyxel_gs1900-24hp-v2.dts b/target/linux/realtek/dts-5.4/rtl8382_zyxel_gs1900-24hp-v2.dts new file mode 100644 index 0000000000..c16152521e --- /dev/null +++ b/target/linux/realtek/dts-5.4/rtl8382_zyxel_gs1900-24hp-v2.dts @@ -0,0 +1,117 @@ +// SPDX-License-Identifier: GPL-2.0-or-later + +#include "rtl8380_zyxel_gs1900.dtsi" + +/ { + compatible = "zyxel,gs1900-24hp-v2", "realtek,rtl838x-soc"; + model = "ZyXEL GS1900-24HP v2 Switch"; + + /* i2c of the left SFP cage: port 25 */ + i2c0: i2c-gpio-0 { + compatible = "i2c-gpio"; + sda-gpios = <&gpio1 24 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + scl-gpios = <&gpio1 25 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + i2c-gpio,delay-us = <2>; + #address-cells = <1>; + #size-cells = <0>; + }; + + sfp0: sfp-p25 { + compatible = "sff,sfp"; + i2c-bus = <&i2c0>; + los-gpio = <&gpio1 27 GPIO_ACTIVE_HIGH>; + tx-fault-gpio = <&gpio1 22 GPIO_ACTIVE_HIGH>; + mod-def0-gpio = <&gpio1 26 GPIO_ACTIVE_LOW>; + tx-disable-gpio = <&gpio1 23 GPIO_ACTIVE_HIGH>; + }; + + /* i2c of the right SFP cage: port 26 */ + i2c1: i2c-gpio-1 { + compatible = "i2c-gpio"; + sda-gpios = <&gpio1 30 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + scl-gpios = <&gpio1 31 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + i2c-gpio,delay-us = <2>; + #address-cells = <1>; + #size-cells = <0>; + }; + + sfp1: sfp-p26 { + compatible = "sff,sfp"; + i2c-bus = <&i2c1>; + los-gpio = <&gpio1 33 GPIO_ACTIVE_HIGH>; + tx-fault-gpio = <&gpio1 28 GPIO_ACTIVE_HIGH>; + mod-def0-gpio = <&gpio1 32 GPIO_ACTIVE_LOW>; + tx-disable-gpio = <&gpio1 29 GPIO_ACTIVE_HIGH>; + }; +}; + +&mdio { + EXTERNAL_PHY(0) + EXTERNAL_PHY(1) + EXTERNAL_PHY(2) + EXTERNAL_PHY(3) + EXTERNAL_PHY(4) + EXTERNAL_PHY(5) + EXTERNAL_PHY(6) + EXTERNAL_PHY(7) + + EXTERNAL_PHY(16) + EXTERNAL_PHY(17) + EXTERNAL_PHY(18) + EXTERNAL_PHY(19) + EXTERNAL_PHY(20) + EXTERNAL_PHY(21) + EXTERNAL_PHY(22) + EXTERNAL_PHY(23) + + INTERNAL_PHY(24) + INTERNAL_PHY(26) +}; + +&switch0 { + ports { + SWITCH_PORT(0, 1, qsgmii) + SWITCH_PORT(1, 2, qsgmii) + SWITCH_PORT(2, 3, qsgmii) + SWITCH_PORT(3, 4, qsgmii) + SWITCH_PORT(4, 5, qsgmii) + SWITCH_PORT(5, 6, qsgmii) + SWITCH_PORT(6, 7, qsgmii) + SWITCH_PORT(7, 8, qsgmii) + + SWITCH_PORT(8, 9, internal) + SWITCH_PORT(9, 10, internal) + SWITCH_PORT(10, 11, internal) + SWITCH_PORT(11, 12, internal) + SWITCH_PORT(12, 13, internal) + SWITCH_PORT(13, 14, internal) + SWITCH_PORT(14, 15, internal) + SWITCH_PORT(15, 16, internal) + + SWITCH_PORT(16, 17, qsgmii) + SWITCH_PORT(17, 18, qsgmii) + SWITCH_PORT(18, 19, qsgmii) + SWITCH_PORT(19, 20, qsgmii) + SWITCH_PORT(20, 21, qsgmii) + SWITCH_PORT(21, 22, qsgmii) + SWITCH_PORT(22, 23, qsgmii) + SWITCH_PORT(23, 24, qsgmii) + + + port@24 { + reg = <24>; + label = "lan25"; + phy-mode = "1000base-x"; + managed = "in-band-status"; + sfp = <&sfp0>; + }; + + port@26 { + reg = <26>; + label = "lan26"; + phy-mode = "1000base-x"; + managed = "in-band-status"; + sfp = <&sfp1>; + }; + }; +}; diff --git a/target/linux/realtek/dts-5.4/rtl838x.dtsi b/target/linux/realtek/dts-5.4/rtl838x.dtsi new file mode 100644 index 0000000000..b59b141f66 --- /dev/null +++ b/target/linux/realtek/dts-5.4/rtl838x.dtsi @@ -0,0 +1,188 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT + +/dts-v1/; + +#define STRINGIZE(s) #s +#define LAN_LABEL(p, s) STRINGIZE(p ## s) +#define SWITCH_PORT_LABEL(n) LAN_LABEL(lan, n) + +#define INTERNAL_PHY(n) \ + phy##n: ethernet-phy@##n { \ + reg = <##n>; \ + compatible = "ethernet-phy-ieee802.3-c22"; \ + phy-is-integrated; \ + }; + +#define EXTERNAL_PHY(n) \ + phy##n: ethernet-phy@##n { \ + reg = <##n>; \ + compatible = "ethernet-phy-ieee802.3-c22"; \ + }; + +#define EXTERNAL_SFP_PHY(n) \ + phy##n: ethernet-phy@##n { \ + compatible = "ethernet-phy-ieee802.3-c22"; \ + sfp; \ + media = "fibre"; \ + reg = <##n>; \ + }; + +#define SWITCH_PORT(n, s, m) \ + port@##n { \ + reg = <##n>; \ + label = SWITCH_PORT_LABEL(s) ; \ + phy-handle = <&phy##n>; \ + phy-mode = #m ; \ + }; + +#define SWITCH_SFP_PORT(n, s, m) \ + port@##n { \ + reg = <##n>; \ + label = SWITCH_PORT_LABEL(s) ; \ + phy-handle = <&phy##n>; \ + phy-mode = #m ; \ + fixed-link { \ + speed = <1000>; \ + full-duplex; \ + }; \ + }; + +/ { + #address-cells = <1>; + #size-cells = <1>; + + compatible = "realtek,rtl838x-soc"; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + frequency = <500000000>; + + cpu@0 { + compatible = "mips,mips4KEc"; + reg = <0>; + }; + }; + + chosen { + bootargs = "console=ttyS0,38400"; + }; + + cpuintc: cpuintc { + #address-cells = <0>; + #interrupt-cells = <1>; + interrupt-controller; + compatible = "mti,cpu-interrupt-controller"; + }; + + intc: rtlintc { + #address-cells = <0>; + #interrupt-cells = <1>; + interrupt-controller; + compatible = "realtek,rt8380-intc"; + reg = <0xb8003000 0x20>; + }; + + spi0: spi@b8001200 { + status = "okay"; + + compatible = "realtek,rtl838x-nor"; + reg = <0xb8001200 0x100>; + + #address-cells = <1>; + #size-cells = <0>; + }; + + uart0: uart@b8002000 { + status = "okay"; + + compatible = "ns16550a"; + reg = <0xb8002000 0x100>; + + clock-frequency = <200000000>; + + interrupt-parent = <&intc>; + interrupts = <31>; + + reg-io-width = <1>; + reg-shift = <2>; + fifo-size = <1>; + no-loopback-test; + }; + + uart1: uart@b8002100 { + pinctrl-names = "default"; + pinctrl-0 = <&enable_uart1>; + + status = "okay"; + + compatible = "ns16550a"; + reg = <0xb8002100 0x100>; + + clock-frequency = <200000000>; + + interrupt-parent = <&intc>; + interrupts = <30>; + + reg-io-width = <1>; + reg-shift = <2>; + fifo-size = <1>; + no-loopback-test; + }; + + gpio0: gpio-controller@b8003500 { + compatible = "realtek,rtl838x-gpio"; + reg = <0xb8003500 0x20>; + gpio-controller; + #gpio-cells = <2>; + interrupt-parent = <&intc>; + interrupts = <23>; + }; + + gpio1: rtl8231-gpio { + status = "disabled"; + compatible = "realtek,rtl8231-gpio"; + #gpio-cells = <2>; + indirect-access-bus-id = <0>; + gpio-controller; + }; + + pinmux: pinmux@bb001000 { + compatible = "pinctrl-single"; + reg = <0xbb001000 0x4>; + + pinctrl-single,bit-per-mux; + pinctrl-single,register-width = <32>; + pinctrl-single,function-mask = <0x1>; + #pinctrl-cells = <2>; + + enable_uart1: pinmux_enable_uart1 { + pinctrl-single,bits = <0x0 0x10 0x10>; + }; + }; + + ethernet0: ethernet@bb00a300 { + status = "okay"; + + compatible = "realtek,rtl838x-eth"; + reg = <0xbb00a300 0x100>; + interrupt-parent = <&intc>; + interrupts = <24>; + #interrupt-cells = <1>; + phy-mode = "internal"; + + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + + switch0: switch@bb000000 { + status = "okay"; + + interrupt-parent = <&intc>; + interrupts = <20>; + + compatible = "realtek,rtl83xx-switch"; + }; +}; diff --git a/target/linux/realtek/dts-5.4/rtl930x.dtsi b/target/linux/realtek/dts-5.4/rtl930x.dtsi new file mode 100644 index 0000000000..5d13fc31b3 --- /dev/null +++ b/target/linux/realtek/dts-5.4/rtl930x.dtsi @@ -0,0 +1,182 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT + +/dts-v1/; + +#define STRINGIZE(s) #s +#define LAN_LABEL(p, s) STRINGIZE(p ## s) +#define SWITCH_PORT_LABEL(n) LAN_LABEL(lan, n) + +#define INTERNAL_PHY(n) \ + phy##n: ethernet-phy@##n { \ + reg = <##n>; \ + compatible = "ethernet-phy-ieee802.3-c22"; \ + phy-is-integrated; \ + }; + +#define EXTERNAL_PHY(n) \ + phy##n: ethernet-phy@##n { \ + reg = <##n>; \ + compatible = "ethernet-phy-ieee802.3-c22"; \ + }; + +#define EXTERNAL_SFP_PHY(n) \ + phy##n: ethernet-phy@##n { \ + compatible = "ethernet-phy-ieee802.3-c22"; \ + sfp; \ + media = "fibre"; \ + reg = <##n>; \ + }; + +#define SWITCH_PORT(n, s, m) \ + port@##n { \ + reg = <##n>; \ + label = SWITCH_PORT_LABEL(s) ; \ + phy-handle = <&phy##n>; \ + phy-mode = #m ; \ + }; + +#define SWITCH_SFP_PORT(n, s, m) \ + port@##n { \ + reg = <##n>; \ + label = SWITCH_PORT_LABEL(s) ; \ + phy-handle = <&phy##n>; \ + phy-mode = #m ; \ + fixed-link { \ + speed = <1000>; \ + full-duplex; \ + }; \ + }; + +/ { + #address-cells = <1>; + #size-cells = <1>; + + compatible = "realtek,rtl838x-soc"; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + frequency = <800000000>; + + cpu@0 { + compatible = "mips,mips34Kc"; + reg = <0>; + }; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x8000000>; + }; + + chosen { + bootargs = "console=ttyS0,38400"; + }; + + cpuintc: cpuintc { + #address-cells = <0>; + #interrupt-cells = <1>; + interrupt-controller; + compatible = "mti,cpu-interrupt-controller"; + }; + + intc: rtlintc { + #address-cells = <0>; + #interrupt-cells = <1>; + interrupt-controller; + compatible = "realtek,rt9300-intc"; + reg = <0xb8003000 0x20>; + }; + + osc: oscillator { + compatible = "fixed-clock"; + #clock-cells = <1>; + clock-frequency = <175000000>; + clock-output-names = "osc"; + }; + + timer: timer@b8003200 { + compatible = "realtek,rtl9300-timer"; + reg = <0xb8003200 0x60>; + interrupt-parent = <&intc>; + interrupts = <8>; + interrupt-names = "ostimer"; + clocks = <&osc 0>; + }; + + spi0: spi@b8001200 { + status = "okay"; + + compatible = "realtek,rtl838x-nor"; + reg = <0xb8001200 0x100>; + + #address-cells = <1>; + #size-cells = <0>; + }; + + uart0: uart@b8002000 { + compatible = "ns16550a"; + reg = <0xb8002000 0x100>; + + clock-frequency = <175000000>; + + interrupt-parent = <&intc>; + interrupts = <30>; + + reg-io-width = <1>; + reg-shift = <2>; + fifo-size = <1>; + no-loopback-test; + + status = "okay"; + }; + + uart1: uart@b8002100 { + compatible = "ns16550a"; + reg = <0xb8002100 0x100>; + + clock-frequency = <175000000>; + + interrupt-parent = <&intc>; + interrupts = <31>; + + reg-io-width = <1>; + reg-shift = <2>; + fifo-size = <1>; + no-loopback-test; + + status = "okay"; + }; + + gpio0: gpio-controller@b8003500 { + compatible = "realtek,rtl838x-gpio"; + reg = <0xb8003500 0x20>; + gpio-controller; + #gpio-cells = <2>; + interrupt-parent = <&intc>; + interrupts = <31>; + }; + + ethernet0: ethernet@bb00a300 { + status = "okay"; + compatible = "realtek,rtl838x-eth"; + reg = <0xbb00a300 0x100>; + interrupt-parent = <&intc>; + interrupts = <24>; + #interrupt-cells = <1>; + phy-mode = "internal"; + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + + switch0: switch@bb000000 { + status = "okay"; + + interrupt-parent = <&intc>; + interrupts = <20>; + + compatible = "realtek,rtl83xx-switch"; + }; +}; diff --git a/target/linux/realtek/dts/rtl8380_netgear_gigabit.dtsi b/target/linux/realtek/dts/rtl8380_netgear_gigabit.dtsi deleted file mode 100644 index 8ba66d6023..0000000000 --- a/target/linux/realtek/dts/rtl8380_netgear_gigabit.dtsi +++ /dev/null @@ -1,78 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later - -#include "rtl838x.dtsi" - -#include -#include - -/ { - compatible = "realtek,rtl838x-soc"; - - chosen { - bootargs = "console=ttyS0,115200"; - }; - - memory@0 { - device_type = "memory"; - reg = <0x0 0x8000000>; - }; - - keys { - compatible = "gpio-keys-polled"; - poll-interval = <20>; - - mode { - label = "reset"; - gpios = <&gpio0 24 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - }; -}; - -&gpio0 { - indirect-access-bus-id = <0>; -}; - -ðernet0 { - mdio: mdio-bus { - compatible = "realtek,rtl838x-mdio"; - regmap = <ðernet0>; - #address-cells = <1>; - #size-cells = <0>; - - INTERNAL_PHY(8) - INTERNAL_PHY(9) - INTERNAL_PHY(10) - INTERNAL_PHY(11) - INTERNAL_PHY(12) - INTERNAL_PHY(13) - INTERNAL_PHY(14) - INTERNAL_PHY(15) - }; -}; - -&switch0 { - ports { - #address-cells = <1>; - #size-cells = <0>; - - SWITCH_PORT(8, 1, internal) - SWITCH_PORT(9, 2, internal) - SWITCH_PORT(10, 3, internal) - SWITCH_PORT(11, 4, internal) - SWITCH_PORT(12, 5, internal) - SWITCH_PORT(13, 6, internal) - SWITCH_PORT(14, 7, internal) - SWITCH_PORT(15, 8, internal) - - port@28 { - ethernet = <ðernet0>; - reg = <28>; - phy-mode = "internal"; - fixed-link { - speed = <1000>; - full-duplex; - }; - }; - }; -}; diff --git a/target/linux/realtek/dts/rtl8380_netgear_gigabit_1xx.dtsi b/target/linux/realtek/dts/rtl8380_netgear_gigabit_1xx.dtsi deleted file mode 100644 index 7eccfcb5a2..0000000000 --- a/target/linux/realtek/dts/rtl8380_netgear_gigabit_1xx.dtsi +++ /dev/null @@ -1,61 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later - -#include "rtl8380_netgear_gigabit.dtsi" - -&spi0 { - status = "okay"; - - flash@0 { - compatible = "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <50000000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "u-boot"; - reg = <0x0000000 0x00e0000>; - read-only; - }; - - partition@e0000 { - label = "u-boot-env"; - reg = <0x00e0000 0x0010000>; - read-only; - }; - - partition@f0000 { - label = "u-boot-env2"; - reg = <0x00f0000 0x0010000>; - }; - - partition@100000 { - label = "jffs"; - reg = <0x0100000 0x0100000>; - read-only; - }; - - partition@200000 { - label = "jffs2"; - reg = <0x0200000 0x0100000>; - read-only; - }; - - partition@300000 { - label = "firmware"; - compatible = "openwrt,uimage", "denx,uimage"; - openwrt,ih-magic = <0x4e474520>; - reg = <0x0300000 0x0e80000>; - }; - - partition@1180000 { - label = "runtime2"; - reg = <0x1180000 0x0e80000>; - read-only; - }; - }; - }; -}; diff --git a/target/linux/realtek/dts/rtl8380_netgear_gigabit_3xx.dtsi b/target/linux/realtek/dts/rtl8380_netgear_gigabit_3xx.dtsi deleted file mode 100644 index efb146a25a..0000000000 --- a/target/linux/realtek/dts/rtl8380_netgear_gigabit_3xx.dtsi +++ /dev/null @@ -1,61 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later - -#include "rtl8380_netgear_gigabit.dtsi" - -&spi0 { - status = "okay"; - - flash@0 { - compatible = "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <50000000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "u-boot"; - reg = <0x0000000 0x00e0000>; - read-only; - }; - - partition@e0000 { - label = "u-boot-env"; - reg = <0x00e0000 0x0010000>; - read-only; - }; - - partition@f0000 { - label = "u-boot-env2"; - reg = <0x00f0000 0x0010000>; - }; - - partition@100000 { - label = "jffs"; - reg = <0x0100000 0x0100000>; - read-only; - }; - - partition@200000 { - label = "jffs2"; - reg = <0x0200000 0x0100000>; - read-only; - }; - - partition@300000 { - label = "firmware"; - compatible = "openwrt,uimage", "denx,uimage"; - openwrt,ih-magic = <0x4e474335>; - reg = <0x0300000 0x0e80000>; - }; - - partition@1180000 { - label = "runtime2"; - reg = <0x1180000 0x0e80000>; - read-only; - }; - }; - }; -}; diff --git a/target/linux/realtek/dts/rtl8380_netgear_gs108t-v3.dts b/target/linux/realtek/dts/rtl8380_netgear_gs108t-v3.dts deleted file mode 100644 index b701e88d1a..0000000000 --- a/target/linux/realtek/dts/rtl8380_netgear_gs108t-v3.dts +++ /dev/null @@ -1,8 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later - -#include "rtl8380_netgear_gigabit_1xx.dtsi" - -/ { - compatible = "netgear,gs108t-v3", "realtek,rtl838x-soc"; - model = "Netgear GS108T v3"; -}; diff --git a/target/linux/realtek/dts/rtl8380_netgear_gs110tpp-v1.dts b/target/linux/realtek/dts/rtl8380_netgear_gs110tpp-v1.dts deleted file mode 100644 index 646f4ed516..0000000000 --- a/target/linux/realtek/dts/rtl8380_netgear_gs110tpp-v1.dts +++ /dev/null @@ -1,8 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later - -#include "rtl8380_netgear_gigabit_1xx.dtsi" - -/ { - compatible = "netgear,gs110tpp-v1", "realtek,rtl838x-soc"; - model = "Netgear GS110TPP v1"; -}; diff --git a/target/linux/realtek/dts/rtl8380_netgear_gs308t-v1.dts b/target/linux/realtek/dts/rtl8380_netgear_gs308t-v1.dts deleted file mode 100644 index 016ed8beb6..0000000000 --- a/target/linux/realtek/dts/rtl8380_netgear_gs308t-v1.dts +++ /dev/null @@ -1,8 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later - -#include "rtl8380_netgear_gigabit_3xx.dtsi" - -/ { - compatible = "netgear,gs308t-v1", "realtek,rtl838x-soc"; - model = "Netgear GS308T v1"; -}; diff --git a/target/linux/realtek/dts/rtl8380_netgear_gs310tp-v1.dts b/target/linux/realtek/dts/rtl8380_netgear_gs310tp-v1.dts deleted file mode 100644 index e3f59bde69..0000000000 --- a/target/linux/realtek/dts/rtl8380_netgear_gs310tp-v1.dts +++ /dev/null @@ -1,21 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later - -#include "rtl8380_netgear_gigabit_3xx.dtsi" - -/ { - compatible = "netgear,gs310tp-v1", "realtek,rtl838x-soc"; - model = "Netgear GS310TP v1"; - -}; - -&mdio { - INTERNAL_PHY(24) - INTERNAL_PHY(26) -}; - -&switch0 { - ports { - SWITCH_SFP_PORT(24, 9, rgmii-id) - SWITCH_SFP_PORT(26, 10, rgmii-id) - }; -}; diff --git a/target/linux/realtek/dts/rtl8380_zyxel_gs1900-10hp.dts b/target/linux/realtek/dts/rtl8380_zyxel_gs1900-10hp.dts deleted file mode 100644 index c16028788e..0000000000 --- a/target/linux/realtek/dts/rtl8380_zyxel_gs1900-10hp.dts +++ /dev/null @@ -1,71 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later - -#include "rtl8380_zyxel_gs1900.dtsi" - -/ { - compatible = "zyxel,gs1900-10hp", "realtek,rtl838x-soc"; - model = "ZyXEL GS1900-10HP Switch"; - - /* i2c of the left SFP cage: port 9 */ - i2c0: i2c-gpio-0 { - compatible = "i2c-gpio"; - sda-gpios = <&gpio1 24 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; - scl-gpios = <&gpio1 25 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; - i2c-gpio,delay-us = <2>; - #address-cells = <1>; - #size-cells = <0>; - }; - - sfp0: sfp-p9 { - compatible = "sff,sfp"; - i2c-bus = <&i2c0>; - los-gpio = <&gpio1 27 GPIO_ACTIVE_HIGH>; - tx-fault-gpio = <&gpio1 22 GPIO_ACTIVE_HIGH>; - mod-def0-gpio = <&gpio1 26 GPIO_ACTIVE_LOW>; - tx-disable-gpio = <&gpio1 23 GPIO_ACTIVE_HIGH>; - }; - - /* i2c of the right SFP cage: port 10 */ - i2c1: i2c-gpio-1 { - compatible = "i2c-gpio"; - sda-gpios = <&gpio1 30 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; - scl-gpios = <&gpio1 31 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; - i2c-gpio,delay-us = <2>; - #address-cells = <1>; - #size-cells = <0>; - }; - - sfp1: sfp-p10 { - compatible = "sff,sfp"; - i2c-bus = <&i2c1>; - los-gpio = <&gpio1 33 GPIO_ACTIVE_HIGH>; - tx-fault-gpio = <&gpio1 28 GPIO_ACTIVE_HIGH>; - mod-def0-gpio = <&gpio1 32 GPIO_ACTIVE_LOW>; - tx-disable-gpio = <&gpio1 29 GPIO_ACTIVE_HIGH>; - }; -}; - -&mdio { - INTERNAL_PHY(24) - INTERNAL_PHY(26) -}; - -&switch0 { - ports { - port@24 { - reg = <24>; - label = "lan9"; - phy-mode = "1000base-x"; - managed = "in-band-status"; - sfp = <&sfp0>; - }; - - port@26 { - reg = <26>; - label = "lan10"; - phy-mode = "1000base-x"; - managed = "in-band-status"; - sfp = <&sfp1>; - }; - }; -}; diff --git a/target/linux/realtek/dts/rtl8380_zyxel_gs1900-8.dts b/target/linux/realtek/dts/rtl8380_zyxel_gs1900-8.dts deleted file mode 100644 index e9c5efe603..0000000000 --- a/target/linux/realtek/dts/rtl8380_zyxel_gs1900-8.dts +++ /dev/null @@ -1,12 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later - -#include "rtl8380_zyxel_gs1900.dtsi" - -/ { - compatible = "zyxel,gs1900-8", "realtek,rtl838x-soc"; - model = "ZyXEL GS1900-8 Switch"; -}; - -&gpio1 { - /delete-node/ poe_enable; -}; diff --git a/target/linux/realtek/dts/rtl8380_zyxel_gs1900-8hp-v1.dts b/target/linux/realtek/dts/rtl8380_zyxel_gs1900-8hp-v1.dts deleted file mode 100644 index 0d9b7c97c0..0000000000 --- a/target/linux/realtek/dts/rtl8380_zyxel_gs1900-8hp-v1.dts +++ /dev/null @@ -1,8 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later - -#include "rtl8380_zyxel_gs1900.dtsi" - -/ { - compatible = "zyxel,gs1900-8hp-v1", "realtek,rtl838x-soc"; - model = "ZyXEL GS1900-8HP v1 Switch"; -}; diff --git a/target/linux/realtek/dts/rtl8380_zyxel_gs1900-8hp-v2.dts b/target/linux/realtek/dts/rtl8380_zyxel_gs1900-8hp-v2.dts deleted file mode 100644 index cdc4aed6d1..0000000000 --- a/target/linux/realtek/dts/rtl8380_zyxel_gs1900-8hp-v2.dts +++ /dev/null @@ -1,8 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later - -#include "rtl8380_zyxel_gs1900.dtsi" - -/ { - compatible = "zyxel,gs1900-8hp-v2", "realtek,rtl838x-soc"; - model = "ZyXEL GS1900-8HP v2 Switch"; -}; diff --git a/target/linux/realtek/dts/rtl8380_zyxel_gs1900.dtsi b/target/linux/realtek/dts/rtl8380_zyxel_gs1900.dtsi deleted file mode 100644 index d61ac3b2b8..0000000000 --- a/target/linux/realtek/dts/rtl8380_zyxel_gs1900.dtsi +++ /dev/null @@ -1,148 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later - -#include "rtl838x.dtsi" - -#include -#include - -/ { - aliases { - led-boot = &led_sys; - led-failsafe = &led_sys; - led-running = &led_sys; - led-upgrade = &led_sys; - }; - - chosen { - bootargs = "console=ttyS0,115200"; - }; - - memory@0 { - device_type = "memory"; - reg = <0x0 0x8000000>; - }; - - gpio1: rtl8231-gpio { - status = "okay"; - - poe_enable { - gpio-hog; - gpios = <13 0>; - output-high; - }; - }; - - keys { - compatible = "gpio-keys-polled"; - poll-interval = <20>; - - reset { - label = "reset"; - gpios = <&gpio1 3 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - }; - - leds { - compatible = "gpio-leds"; - - led_sys: sys { - label = "green:sys"; - gpios = <&gpio0 47 GPIO_ACTIVE_HIGH>; - }; - }; -}; - -&spi0 { - status = "okay"; - - flash@0 { - compatible = "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <10000000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "u-boot"; - reg = <0x0 0x40000>; - read-only; - }; - partition@40000 { - label = "u-boot-env"; - reg = <0x40000 0x10000>; - read-only; - }; - partition@50000 { - label = "u-boot-env2"; - reg = <0x50000 0x10000>; - }; - partition@60000 { - label = "jffs"; - reg = <0x60000 0x100000>; - }; - partition@160000 { - label = "jffs2"; - reg = <0x160000 0x100000>; - }; - partition@b260000 { - label = "firmware"; - reg = <0x260000 0x6d0000>; - compatible = "openwrt,uimage", "denx,uimage"; - openwrt,ih-magic = <0x83800000>; - }; - partition@930000 { - label = "runtime2"; - reg = <0x930000 0x6d0000>; - }; - }; - }; -}; - -ðernet0 { - mdio: mdio-bus { - compatible = "realtek,rtl838x-mdio"; - regmap = <ðernet0>; - #address-cells = <1>; - #size-cells = <0>; - - INTERNAL_PHY(8) - INTERNAL_PHY(9) - INTERNAL_PHY(10) - INTERNAL_PHY(11) - INTERNAL_PHY(12) - INTERNAL_PHY(13) - INTERNAL_PHY(14) - INTERNAL_PHY(15) - }; -}; - -&switch0 { - ports { - #address-cells = <1>; - #size-cells = <0>; - - SWITCH_PORT(8, 1, internal) - SWITCH_PORT(9, 2, internal) - SWITCH_PORT(10, 3, internal) - SWITCH_PORT(11, 4, internal) - SWITCH_PORT(12, 5, internal) - SWITCH_PORT(13, 6, internal) - SWITCH_PORT(14, 7, internal) - SWITCH_PORT(15, 8, internal) - - port@28 { - ethernet = <ðernet0>; - reg = <28>; - phy-mode = "internal"; - - fixed-link { - speed = <1000>; - full-duplex; - }; - }; - }; -}; diff --git a/target/linux/realtek/dts/rtl8382_allnet_all-sg8208m.dts b/target/linux/realtek/dts/rtl8382_allnet_all-sg8208m.dts deleted file mode 100644 index fdcc01fdac..0000000000 --- a/target/linux/realtek/dts/rtl8382_allnet_all-sg8208m.dts +++ /dev/null @@ -1,146 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later - -#include "rtl838x.dtsi" - -#include -#include - -/ { - compatible = "allnet,all-sg8208m", "realtek,rtl838x-soc"; - model = "ALLNET ALL-SG8208M"; - - aliases { - led-boot = &led_sys; - led-failsafe = &led_sys; - led-running = &led_sys; - led-upgrade = &led_sys; - }; - - chosen { - bootargs = "console=ttyS0,115200"; - }; - - memory@0 { - device_type = "memory"; - reg = <0x0 0x8000000>; - }; - - keys { - compatible = "gpio-keys-polled"; - poll-interval = <20>; - - reset { - label = "reset"; - gpios = <&gpio0 67 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - }; - - leds { - compatible = "gpio-leds"; - - led_sys: sys { - label = "green:sys"; - gpios = <&gpio0 47 GPIO_ACTIVE_HIGH>; - }; - // GPIO 25: power on/off all port leds - }; -}; - -&gpio0 { - indirect-access-bus-id = <0>; -}; - -&spi0 { - status = "okay"; - - flash@0 { - compatible = "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <10000000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "u-boot"; - reg = <0x0 0x80000>; - read-only; - }; - - partition@80000 { - label = "u-boot-env"; - reg = <0x80000 0x10000>; - read-only; - }; - - partition@90000 { - label = "u-boot-env2"; - reg = <0x90000 0x10000>; - }; - - partition@a0000 { - label = "jffs"; - reg = <0xa0000 0x100000>; - }; - - partition@1a0000 { - label = "jffs2"; - reg = <0x1a0000 0x100000>; - }; - - partition@2a0000 { - label = "firmware"; - reg = <0x2a0000 0xd60000>; - compatible = "openwrt,uimage", "denx,uimage"; - openwrt,ih-magic = <0x00000006>; - }; - }; - }; -}; - -ðernet0 { - mdio: mdio-bus { - compatible = "realtek,rtl838x-mdio"; - regmap = <ðernet0>; - #address-cells = <1>; - #size-cells = <0>; - - INTERNAL_PHY(8) - INTERNAL_PHY(9) - INTERNAL_PHY(10) - INTERNAL_PHY(11) - INTERNAL_PHY(12) - INTERNAL_PHY(13) - INTERNAL_PHY(14) - INTERNAL_PHY(15) - }; -}; - -&switch0 { - ports { - #address-cells = <1>; - #size-cells = <0>; - - SWITCH_PORT(8, 1, internal) - SWITCH_PORT(9, 2, internal) - SWITCH_PORT(10, 3, internal) - SWITCH_PORT(11, 4, internal) - SWITCH_PORT(12, 5, internal) - SWITCH_PORT(13, 6, internal) - SWITCH_PORT(14, 7, internal) - SWITCH_PORT(15, 8, internal) - - port@28 { - ethernet = <ðernet0>; - reg = <28>; - phy-mode = "internal"; - fixed-link { - speed = <1000>; - full-duplex; - }; - }; - }; -}; diff --git a/target/linux/realtek/dts/rtl8382_d-link_dgs-1210-10p.dts b/target/linux/realtek/dts/rtl8382_d-link_dgs-1210-10p.dts deleted file mode 100644 index e2f5e7a4c0..0000000000 --- a/target/linux/realtek/dts/rtl8382_d-link_dgs-1210-10p.dts +++ /dev/null @@ -1,152 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later OR MIT - -#include "rtl838x.dtsi" - -#include -#include - -/ { - compatible = "d-link,dgs-1210-10p", "realtek,rtl838x-soc"; - model = "D-Link DGS-1210-10P"; - - aliases { - led-boot = &led_power; - led-failsafe = &led_power; - led-running = &led_power; - led-upgrade = &led_power; - }; - - chosen { - bootargs = "console=ttyS0,115200"; - }; - - memory@0 { - device_type = "memory"; - reg = <0x0 0x8000000>; - }; - - leds { - compatible = "gpio-leds"; - - led_power: power { - // GPIO 24 seems to provide power to the leds - label = "green:power"; - gpios = <&gpio0 47 GPIO_ACTIVE_LOW>; - }; - }; - - keys { - compatible = "gpio-keys-polled"; - poll-interval = <20>; - - mode { - label = "reset"; - gpios = <&gpio0 94 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - }; -}; - - -&gpio0 { - indirect-access-bus-id = <0>; -}; - -&spi0 { - status = "okay"; - flash@0 { - compatible = "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <10000000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "u-boot"; - reg = <0x00000000 0x80000>; - read-only; - }; - partition@80000 { - label = "u-boot-env"; - reg = <0x00080000 0x40000>; - read-only; - }; - partition@c0000 { - label = "u-boot-env2"; - reg = <0x000c0000 0x40000>; - }; - partition@280000 { - label = "firmware"; - compatible = "denx,uimage"; - reg = <0x00100000 0xd80000>; - }; - partition@be80000 { - label = "kernel2"; - reg = <0x00e80000 0x180000>; - }; - partition@1000000 { - label = "sysinfo"; - reg = <0x01000000 0x40000>; - }; - partition@1040000 { - label = "rootfs2"; - reg = <0x01040000 0xc00000>; - }; - partition@1c40000 { - label = "jffs2"; - reg = <0x01c40000 0x3c0000>; - }; - }; - }; -}; - -ðernet0 { - mdio: mdio-bus { - compatible = "realtek,rtl838x-mdio"; - regmap = <ðernet0>; - #address-cells = <1>; - #size-cells = <0>; - - INTERNAL_PHY(8) - INTERNAL_PHY(9) - INTERNAL_PHY(10) - INTERNAL_PHY(11) - INTERNAL_PHY(12) - INTERNAL_PHY(13) - INTERNAL_PHY(14) - INTERNAL_PHY(15) - INTERNAL_PHY(24) - INTERNAL_PHY(26) - }; -}; - -&switch0 { - ports { - #address-cells = <1>; - #size-cells = <0>; - - SWITCH_PORT(8, 1, internal) - SWITCH_PORT(9, 2, internal) - SWITCH_PORT(10, 3, internal) - SWITCH_PORT(11, 4, internal) - SWITCH_PORT(12, 5, internal) - SWITCH_PORT(13, 6, internal) - SWITCH_PORT(14, 7, internal) - SWITCH_PORT(15, 8, internal) - SWITCH_SFP_PORT(24, 9, rgmii-id) - SWITCH_SFP_PORT(26, 10, rgmii-id) - - port@28 { - ethernet = <ðernet0>; - reg = <28>; - phy-mode = "internal"; - fixed-link { - speed = <1000>; - full-duplex; - }; - }; - }; -}; diff --git a/target/linux/realtek/dts/rtl8382_d-link_dgs-1210-16.dts b/target/linux/realtek/dts/rtl8382_d-link_dgs-1210-16.dts deleted file mode 100644 index ac51185ed0..0000000000 --- a/target/linux/realtek/dts/rtl8382_d-link_dgs-1210-16.dts +++ /dev/null @@ -1,80 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later OR MIT - -#include "rtl8382_d-link_dgs-1210.dtsi" - -/ { - compatible = "d-link,dgs-1210-16", "realtek,rtl838x-soc"; - model = "D-Link DGS-1210-16"; -}; - -ðernet0 { - mdio: mdio-bus { - compatible = "realtek,rtl838x-mdio"; - regmap = <ðernet0>; - #address-cells = <1>; - #size-cells = <0>; - - EXTERNAL_PHY(0) - EXTERNAL_PHY(1) - EXTERNAL_PHY(2) - EXTERNAL_PHY(3) - EXTERNAL_PHY(4) - EXTERNAL_PHY(5) - EXTERNAL_PHY(6) - EXTERNAL_PHY(7) - - INTERNAL_PHY(8) - INTERNAL_PHY(9) - INTERNAL_PHY(10) - INTERNAL_PHY(11) - INTERNAL_PHY(12) - INTERNAL_PHY(13) - INTERNAL_PHY(14) - INTERNAL_PHY(15) - - EXTERNAL_SFP_PHY(24) - EXTERNAL_SFP_PHY(25) - EXTERNAL_SFP_PHY(26) - EXTERNAL_SFP_PHY(27) - }; -}; - -&switch0 { - ports { - #address-cells = <1>; - #size-cells = <0>; - - SWITCH_PORT(0, 1, qsgmii) - SWITCH_PORT(1, 2, qsgmii) - SWITCH_PORT(2, 3, qsgmii) - SWITCH_PORT(3, 4, qsgmii) - SWITCH_PORT(4, 5, qsgmii) - SWITCH_PORT(5, 6, qsgmii) - SWITCH_PORT(6, 7, qsgmii) - SWITCH_PORT(7, 8, qsgmii) - - SWITCH_PORT(8, 9, internal) - SWITCH_PORT(9, 10, internal) - SWITCH_PORT(10, 11, internal) - SWITCH_PORT(11, 12, internal) - SWITCH_PORT(12, 13, internal) - SWITCH_PORT(13, 14, internal) - SWITCH_PORT(14, 15, internal) - SWITCH_PORT(15, 16, internal) - - SWITCH_PORT(24, 17, qsgmii) - SWITCH_PORT(25, 18, qsgmii) - SWITCH_PORT(26, 19, qsgmii) - SWITCH_PORT(27, 20, qsgmii) - - port@28 { - ethernet = <ðernet0>; - reg = <28>; - phy-mode = "internal"; - fixed-link { - speed = <1000>; - full-duplex; - }; - }; - }; -}; diff --git a/target/linux/realtek/dts/rtl8382_d-link_dgs-1210-28.dts b/target/linux/realtek/dts/rtl8382_d-link_dgs-1210-28.dts deleted file mode 100644 index edd4fb140f..0000000000 --- a/target/linux/realtek/dts/rtl8382_d-link_dgs-1210-28.dts +++ /dev/null @@ -1,98 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later OR MIT - -#include "rtl8382_d-link_dgs-1210.dtsi" - -/ { - compatible = "d-link,dgs-1210-28", "realtek,rtl838x-soc"; - model = "D-Link DGS-1210-28"; -}; - -ðernet0 { - mdio: mdio-bus { - compatible = "realtek,rtl838x-mdio"; - regmap = <ðernet0>; - #address-cells = <1>; - #size-cells = <0>; - - EXTERNAL_PHY(0) - EXTERNAL_PHY(1) - EXTERNAL_PHY(2) - EXTERNAL_PHY(3) - EXTERNAL_PHY(4) - EXTERNAL_PHY(5) - EXTERNAL_PHY(6) - EXTERNAL_PHY(7) - - INTERNAL_PHY(8) - INTERNAL_PHY(9) - INTERNAL_PHY(10) - INTERNAL_PHY(11) - INTERNAL_PHY(12) - INTERNAL_PHY(13) - INTERNAL_PHY(14) - INTERNAL_PHY(15) - - EXTERNAL_PHY(16) - EXTERNAL_PHY(17) - EXTERNAL_PHY(18) - EXTERNAL_PHY(19) - EXTERNAL_PHY(20) - EXTERNAL_PHY(21) - EXTERNAL_PHY(22) - EXTERNAL_PHY(23) - - EXTERNAL_SFP_PHY(24) - EXTERNAL_SFP_PHY(25) - EXTERNAL_SFP_PHY(26) - EXTERNAL_SFP_PHY(27) - }; -}; - -&switch0 { - ports { - #address-cells = <1>; - #size-cells = <0>; - - SWITCH_PORT(0, 1, qsgmii) - SWITCH_PORT(1, 2, qsgmii) - SWITCH_PORT(2, 3, qsgmii) - SWITCH_PORT(3, 4, qsgmii) - SWITCH_PORT(4, 5, qsgmii) - SWITCH_PORT(5, 6, qsgmii) - SWITCH_PORT(6, 7, qsgmii) - SWITCH_PORT(7, 8, qsgmii) - - SWITCH_PORT(8, 9, internal) - SWITCH_PORT(9, 10, internal) - SWITCH_PORT(10, 11, internal) - SWITCH_PORT(11, 12, internal) - SWITCH_PORT(12, 13, internal) - SWITCH_PORT(13, 14, internal) - SWITCH_PORT(14, 15, internal) - SWITCH_PORT(15, 16, internal) - - SWITCH_PORT(16, 17, qsgmii) - SWITCH_PORT(17, 18, qsgmii) - SWITCH_PORT(18, 19, qsgmii) - SWITCH_PORT(19, 20, qsgmii) - SWITCH_PORT(20, 21, qsgmii) - SWITCH_PORT(21, 22, qsgmii) - SWITCH_PORT(22, 23, qsgmii) - SWITCH_PORT(23, 24, qsgmii) - - SWITCH_PORT(24, 25, qsgmii) - SWITCH_PORT(25, 26, qsgmii) - SWITCH_PORT(26, 27, qsgmii) - SWITCH_PORT(27, 28, qsgmii) - - port@28 { - ethernet = <ðernet0>; - reg = <28>; - phy-mode = "internal"; - fixed-link { - speed = <1000>; - full-duplex; - }; - }; - }; -}; diff --git a/target/linux/realtek/dts/rtl8382_d-link_dgs-1210.dtsi b/target/linux/realtek/dts/rtl8382_d-link_dgs-1210.dtsi deleted file mode 100644 index a14738c8a9..0000000000 --- a/target/linux/realtek/dts/rtl8382_d-link_dgs-1210.dtsi +++ /dev/null @@ -1,88 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later OR MIT - -#include "rtl838x.dtsi" - -#include -#include - -/ { - aliases { - led-boot = &led_power; - led-failsafe = &led_power; - led-running = &led_power; - led-upgrade = &led_power; - }; - - chosen { - bootargs = "console=ttyS0,115200"; - }; - - memory@0 { - device_type = "memory"; - reg = <0x0 0x8000000>; - }; - - leds { - compatible = "gpio-leds"; - - led_power: power { - label = "green:power"; - gpios = <&gpio0 24 GPIO_ACTIVE_LOW>; - }; - }; -}; - -&gpio0 { - indirect-access-bus-id = <0>; -}; - -&spi0 { - status = "okay"; - flash@0 { - compatible = "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <10000000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "u-boot"; - reg = <0x00000000 0x80000>; - read-only; - }; - partition@80000 { - label = "u-boot-env"; - reg = <0x00080000 0x40000>; - read-only; - }; - partition@c0000 { - label = "u-boot-env2"; - reg = <0x000c0000 0x40000>; - }; - partition@280000 { - label = "firmware"; - compatible = "denx,uimage"; - reg = <0x00100000 0xd80000>; - }; - partition@be80000 { - label = "kernel2"; - reg = <0x00e80000 0x180000>; - }; - partition@1000000 { - label = "sysinfo"; - reg = <0x01000000 0x40000>; - }; - partition@1040000 { - label = "rootfs2"; - reg = <0x01040000 0xc00000>; - }; - partition@1c40000 { - label = "jffs2"; - reg = <0x01c40000 0x3c0000>; - }; - }; - }; -}; diff --git a/target/linux/realtek/dts/rtl8382_inaba_aml2-17gp.dts b/target/linux/realtek/dts/rtl8382_inaba_aml2-17gp.dts deleted file mode 100644 index 87761ac462..0000000000 --- a/target/linux/realtek/dts/rtl8382_inaba_aml2-17gp.dts +++ /dev/null @@ -1,164 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later OR MIT - -#include "rtl838x.dtsi" - -#include -#include - -/ { - compatible = "inaba,aml2-17gp", "realtek,rtl838x-soc"; - model = "INABA Abaniact AML2-17GP"; - - chosen { - bootargs = "console=ttyS0,115200"; - }; - - memory@0 { - device_type = "memory"; - reg = <0x0 0x8000000>; - }; - - keys { - compatible = "gpio-keys-polled"; - poll-interval = <20>; - - reset { - label = "reset"; - gpios = <&gpio0 24 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - }; -}; - -&gpio0 { - indirect-access-bus-id = <0>; -}; - -&spi0 { - status = "okay"; - - flash@0 { - compatible = "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <10000000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "u-boot"; - reg = <0x0 0x80000>; - read-only; - }; - - partition@80000 { - label = "u-boot-env"; - reg = <0x80000 0x10000>; - read-only; - }; - - partition@90000 { - label = "u-boot-env2"; - reg = <0x90000 0x10000>; - }; - - partition@a0000 { - label = "jffs2_cfg"; - reg = <0xa0000 0x400000>; - read-only; - }; - - partition@4a0000 { - label = "jffs2_log"; - reg = <0x4a0000 0x100000>; - read-only; - }; - - partition@5a0000 { - compatible = "openwrt,uimage", "denx,uimage"; - label = "firmware"; - reg = <0x5a0000 0xd30000>; - openwrt,ih-magic = <0x83800000>; - }; - - partition@12d0000 { - label = "runtime2"; - reg = <0x12d0000 0xd30000>; - }; - }; - }; -}; - -ðernet0 { - mdio-bus { - compatible = "realtek,rtl838x-mdio"; - regmap = <ðernet0>; - #address-cells = <1>; - #size-cells = <0>; - - INTERNAL_PHY(8) - INTERNAL_PHY(9) - INTERNAL_PHY(10) - INTERNAL_PHY(11) - INTERNAL_PHY(12) - INTERNAL_PHY(13) - INTERNAL_PHY(14) - INTERNAL_PHY(15) - - EXTERNAL_PHY(16) - EXTERNAL_PHY(17) - EXTERNAL_PHY(18) - EXTERNAL_PHY(19) - EXTERNAL_PHY(20) - EXTERNAL_PHY(21) - EXTERNAL_PHY(22) - EXTERNAL_PHY(23) - - EXTERNAL_PHY(24) - }; -}; - -&switch0 { - ports { - #address-cells = <1>; - #size-cells = <0>; - - SWITCH_PORT(8, 1, internal) - SWITCH_PORT(9, 2, internal) - SWITCH_PORT(10, 3, internal) - SWITCH_PORT(11, 4, internal) - SWITCH_PORT(12, 5, internal) - SWITCH_PORT(13, 6, internal) - SWITCH_PORT(14, 7, internal) - SWITCH_PORT(15, 8, internal) - - SWITCH_PORT(16, 9, qsgmii) - SWITCH_PORT(17, 10, qsgmii) - SWITCH_PORT(18, 11, qsgmii) - SWITCH_PORT(19, 12, qsgmii) - SWITCH_PORT(20, 13, qsgmii) - SWITCH_PORT(21, 14, qsgmii) - SWITCH_PORT(22, 15, qsgmii) - SWITCH_PORT(23, 16, qsgmii) - - port@24 { - reg = <24>; - label = "wan"; - phy-handle = <&phy24>; - phy-mode = "qsgmii"; - }; - - port@28 { - ethernet = <ðernet0>; - reg = <28>; - phy-mode = "internal"; - - fixed-link { - speed = <1000>; - full-duplex; - }; - }; - }; -}; diff --git a/target/linux/realtek/dts/rtl8382_zyxel_gs1900-24hp-v2.dts b/target/linux/realtek/dts/rtl8382_zyxel_gs1900-24hp-v2.dts deleted file mode 100644 index c16152521e..0000000000 --- a/target/linux/realtek/dts/rtl8382_zyxel_gs1900-24hp-v2.dts +++ /dev/null @@ -1,117 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later - -#include "rtl8380_zyxel_gs1900.dtsi" - -/ { - compatible = "zyxel,gs1900-24hp-v2", "realtek,rtl838x-soc"; - model = "ZyXEL GS1900-24HP v2 Switch"; - - /* i2c of the left SFP cage: port 25 */ - i2c0: i2c-gpio-0 { - compatible = "i2c-gpio"; - sda-gpios = <&gpio1 24 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; - scl-gpios = <&gpio1 25 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; - i2c-gpio,delay-us = <2>; - #address-cells = <1>; - #size-cells = <0>; - }; - - sfp0: sfp-p25 { - compatible = "sff,sfp"; - i2c-bus = <&i2c0>; - los-gpio = <&gpio1 27 GPIO_ACTIVE_HIGH>; - tx-fault-gpio = <&gpio1 22 GPIO_ACTIVE_HIGH>; - mod-def0-gpio = <&gpio1 26 GPIO_ACTIVE_LOW>; - tx-disable-gpio = <&gpio1 23 GPIO_ACTIVE_HIGH>; - }; - - /* i2c of the right SFP cage: port 26 */ - i2c1: i2c-gpio-1 { - compatible = "i2c-gpio"; - sda-gpios = <&gpio1 30 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; - scl-gpios = <&gpio1 31 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; - i2c-gpio,delay-us = <2>; - #address-cells = <1>; - #size-cells = <0>; - }; - - sfp1: sfp-p26 { - compatible = "sff,sfp"; - i2c-bus = <&i2c1>; - los-gpio = <&gpio1 33 GPIO_ACTIVE_HIGH>; - tx-fault-gpio = <&gpio1 28 GPIO_ACTIVE_HIGH>; - mod-def0-gpio = <&gpio1 32 GPIO_ACTIVE_LOW>; - tx-disable-gpio = <&gpio1 29 GPIO_ACTIVE_HIGH>; - }; -}; - -&mdio { - EXTERNAL_PHY(0) - EXTERNAL_PHY(1) - EXTERNAL_PHY(2) - EXTERNAL_PHY(3) - EXTERNAL_PHY(4) - EXTERNAL_PHY(5) - EXTERNAL_PHY(6) - EXTERNAL_PHY(7) - - EXTERNAL_PHY(16) - EXTERNAL_PHY(17) - EXTERNAL_PHY(18) - EXTERNAL_PHY(19) - EXTERNAL_PHY(20) - EXTERNAL_PHY(21) - EXTERNAL_PHY(22) - EXTERNAL_PHY(23) - - INTERNAL_PHY(24) - INTERNAL_PHY(26) -}; - -&switch0 { - ports { - SWITCH_PORT(0, 1, qsgmii) - SWITCH_PORT(1, 2, qsgmii) - SWITCH_PORT(2, 3, qsgmii) - SWITCH_PORT(3, 4, qsgmii) - SWITCH_PORT(4, 5, qsgmii) - SWITCH_PORT(5, 6, qsgmii) - SWITCH_PORT(6, 7, qsgmii) - SWITCH_PORT(7, 8, qsgmii) - - SWITCH_PORT(8, 9, internal) - SWITCH_PORT(9, 10, internal) - SWITCH_PORT(10, 11, internal) - SWITCH_PORT(11, 12, internal) - SWITCH_PORT(12, 13, internal) - SWITCH_PORT(13, 14, internal) - SWITCH_PORT(14, 15, internal) - SWITCH_PORT(15, 16, internal) - - SWITCH_PORT(16, 17, qsgmii) - SWITCH_PORT(17, 18, qsgmii) - SWITCH_PORT(18, 19, qsgmii) - SWITCH_PORT(19, 20, qsgmii) - SWITCH_PORT(20, 21, qsgmii) - SWITCH_PORT(21, 22, qsgmii) - SWITCH_PORT(22, 23, qsgmii) - SWITCH_PORT(23, 24, qsgmii) - - - port@24 { - reg = <24>; - label = "lan25"; - phy-mode = "1000base-x"; - managed = "in-band-status"; - sfp = <&sfp0>; - }; - - port@26 { - reg = <26>; - label = "lan26"; - phy-mode = "1000base-x"; - managed = "in-band-status"; - sfp = <&sfp1>; - }; - }; -}; diff --git a/target/linux/realtek/dts/rtl838x.dtsi b/target/linux/realtek/dts/rtl838x.dtsi deleted file mode 100644 index b59b141f66..0000000000 --- a/target/linux/realtek/dts/rtl838x.dtsi +++ /dev/null @@ -1,188 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later OR MIT - -/dts-v1/; - -#define STRINGIZE(s) #s -#define LAN_LABEL(p, s) STRINGIZE(p ## s) -#define SWITCH_PORT_LABEL(n) LAN_LABEL(lan, n) - -#define INTERNAL_PHY(n) \ - phy##n: ethernet-phy@##n { \ - reg = <##n>; \ - compatible = "ethernet-phy-ieee802.3-c22"; \ - phy-is-integrated; \ - }; - -#define EXTERNAL_PHY(n) \ - phy##n: ethernet-phy@##n { \ - reg = <##n>; \ - compatible = "ethernet-phy-ieee802.3-c22"; \ - }; - -#define EXTERNAL_SFP_PHY(n) \ - phy##n: ethernet-phy@##n { \ - compatible = "ethernet-phy-ieee802.3-c22"; \ - sfp; \ - media = "fibre"; \ - reg = <##n>; \ - }; - -#define SWITCH_PORT(n, s, m) \ - port@##n { \ - reg = <##n>; \ - label = SWITCH_PORT_LABEL(s) ; \ - phy-handle = <&phy##n>; \ - phy-mode = #m ; \ - }; - -#define SWITCH_SFP_PORT(n, s, m) \ - port@##n { \ - reg = <##n>; \ - label = SWITCH_PORT_LABEL(s) ; \ - phy-handle = <&phy##n>; \ - phy-mode = #m ; \ - fixed-link { \ - speed = <1000>; \ - full-duplex; \ - }; \ - }; - -/ { - #address-cells = <1>; - #size-cells = <1>; - - compatible = "realtek,rtl838x-soc"; - - cpus { - #address-cells = <1>; - #size-cells = <0>; - frequency = <500000000>; - - cpu@0 { - compatible = "mips,mips4KEc"; - reg = <0>; - }; - }; - - chosen { - bootargs = "console=ttyS0,38400"; - }; - - cpuintc: cpuintc { - #address-cells = <0>; - #interrupt-cells = <1>; - interrupt-controller; - compatible = "mti,cpu-interrupt-controller"; - }; - - intc: rtlintc { - #address-cells = <0>; - #interrupt-cells = <1>; - interrupt-controller; - compatible = "realtek,rt8380-intc"; - reg = <0xb8003000 0x20>; - }; - - spi0: spi@b8001200 { - status = "okay"; - - compatible = "realtek,rtl838x-nor"; - reg = <0xb8001200 0x100>; - - #address-cells = <1>; - #size-cells = <0>; - }; - - uart0: uart@b8002000 { - status = "okay"; - - compatible = "ns16550a"; - reg = <0xb8002000 0x100>; - - clock-frequency = <200000000>; - - interrupt-parent = <&intc>; - interrupts = <31>; - - reg-io-width = <1>; - reg-shift = <2>; - fifo-size = <1>; - no-loopback-test; - }; - - uart1: uart@b8002100 { - pinctrl-names = "default"; - pinctrl-0 = <&enable_uart1>; - - status = "okay"; - - compatible = "ns16550a"; - reg = <0xb8002100 0x100>; - - clock-frequency = <200000000>; - - interrupt-parent = <&intc>; - interrupts = <30>; - - reg-io-width = <1>; - reg-shift = <2>; - fifo-size = <1>; - no-loopback-test; - }; - - gpio0: gpio-controller@b8003500 { - compatible = "realtek,rtl838x-gpio"; - reg = <0xb8003500 0x20>; - gpio-controller; - #gpio-cells = <2>; - interrupt-parent = <&intc>; - interrupts = <23>; - }; - - gpio1: rtl8231-gpio { - status = "disabled"; - compatible = "realtek,rtl8231-gpio"; - #gpio-cells = <2>; - indirect-access-bus-id = <0>; - gpio-controller; - }; - - pinmux: pinmux@bb001000 { - compatible = "pinctrl-single"; - reg = <0xbb001000 0x4>; - - pinctrl-single,bit-per-mux; - pinctrl-single,register-width = <32>; - pinctrl-single,function-mask = <0x1>; - #pinctrl-cells = <2>; - - enable_uart1: pinmux_enable_uart1 { - pinctrl-single,bits = <0x0 0x10 0x10>; - }; - }; - - ethernet0: ethernet@bb00a300 { - status = "okay"; - - compatible = "realtek,rtl838x-eth"; - reg = <0xbb00a300 0x100>; - interrupt-parent = <&intc>; - interrupts = <24>; - #interrupt-cells = <1>; - phy-mode = "internal"; - - fixed-link { - speed = <1000>; - full-duplex; - }; - }; - - switch0: switch@bb000000 { - status = "okay"; - - interrupt-parent = <&intc>; - interrupts = <20>; - - compatible = "realtek,rtl83xx-switch"; - }; -}; diff --git a/target/linux/realtek/dts/rtl930x.dtsi b/target/linux/realtek/dts/rtl930x.dtsi deleted file mode 100644 index 5d13fc31b3..0000000000 --- a/target/linux/realtek/dts/rtl930x.dtsi +++ /dev/null @@ -1,182 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later OR MIT - -/dts-v1/; - -#define STRINGIZE(s) #s -#define LAN_LABEL(p, s) STRINGIZE(p ## s) -#define SWITCH_PORT_LABEL(n) LAN_LABEL(lan, n) - -#define INTERNAL_PHY(n) \ - phy##n: ethernet-phy@##n { \ - reg = <##n>; \ - compatible = "ethernet-phy-ieee802.3-c22"; \ - phy-is-integrated; \ - }; - -#define EXTERNAL_PHY(n) \ - phy##n: ethernet-phy@##n { \ - reg = <##n>; \ - compatible = "ethernet-phy-ieee802.3-c22"; \ - }; - -#define EXTERNAL_SFP_PHY(n) \ - phy##n: ethernet-phy@##n { \ - compatible = "ethernet-phy-ieee802.3-c22"; \ - sfp; \ - media = "fibre"; \ - reg = <##n>; \ - }; - -#define SWITCH_PORT(n, s, m) \ - port@##n { \ - reg = <##n>; \ - label = SWITCH_PORT_LABEL(s) ; \ - phy-handle = <&phy##n>; \ - phy-mode = #m ; \ - }; - -#define SWITCH_SFP_PORT(n, s, m) \ - port@##n { \ - reg = <##n>; \ - label = SWITCH_PORT_LABEL(s) ; \ - phy-handle = <&phy##n>; \ - phy-mode = #m ; \ - fixed-link { \ - speed = <1000>; \ - full-duplex; \ - }; \ - }; - -/ { - #address-cells = <1>; - #size-cells = <1>; - - compatible = "realtek,rtl838x-soc"; - - cpus { - #address-cells = <1>; - #size-cells = <0>; - frequency = <800000000>; - - cpu@0 { - compatible = "mips,mips34Kc"; - reg = <0>; - }; - }; - - memory@0 { - device_type = "memory"; - reg = <0x0 0x8000000>; - }; - - chosen { - bootargs = "console=ttyS0,38400"; - }; - - cpuintc: cpuintc { - #address-cells = <0>; - #interrupt-cells = <1>; - interrupt-controller; - compatible = "mti,cpu-interrupt-controller"; - }; - - intc: rtlintc { - #address-cells = <0>; - #interrupt-cells = <1>; - interrupt-controller; - compatible = "realtek,rt9300-intc"; - reg = <0xb8003000 0x20>; - }; - - osc: oscillator { - compatible = "fixed-clock"; - #clock-cells = <1>; - clock-frequency = <175000000>; - clock-output-names = "osc"; - }; - - timer: timer@b8003200 { - compatible = "realtek,rtl9300-timer"; - reg = <0xb8003200 0x60>; - interrupt-parent = <&intc>; - interrupts = <8>; - interrupt-names = "ostimer"; - clocks = <&osc 0>; - }; - - spi0: spi@b8001200 { - status = "okay"; - - compatible = "realtek,rtl838x-nor"; - reg = <0xb8001200 0x100>; - - #address-cells = <1>; - #size-cells = <0>; - }; - - uart0: uart@b8002000 { - compatible = "ns16550a"; - reg = <0xb8002000 0x100>; - - clock-frequency = <175000000>; - - interrupt-parent = <&intc>; - interrupts = <30>; - - reg-io-width = <1>; - reg-shift = <2>; - fifo-size = <1>; - no-loopback-test; - - status = "okay"; - }; - - uart1: uart@b8002100 { - compatible = "ns16550a"; - reg = <0xb8002100 0x100>; - - clock-frequency = <175000000>; - - interrupt-parent = <&intc>; - interrupts = <31>; - - reg-io-width = <1>; - reg-shift = <2>; - fifo-size = <1>; - no-loopback-test; - - status = "okay"; - }; - - gpio0: gpio-controller@b8003500 { - compatible = "realtek,rtl838x-gpio"; - reg = <0xb8003500 0x20>; - gpio-controller; - #gpio-cells = <2>; - interrupt-parent = <&intc>; - interrupts = <31>; - }; - - ethernet0: ethernet@bb00a300 { - status = "okay"; - compatible = "realtek,rtl838x-eth"; - reg = <0xbb00a300 0x100>; - interrupt-parent = <&intc>; - interrupts = <24>; - #interrupt-cells = <1>; - phy-mode = "internal"; - fixed-link { - speed = <1000>; - full-duplex; - }; - }; - - switch0: switch@bb000000 { - status = "okay"; - - interrupt-parent = <&intc>; - interrupts = <20>; - - compatible = "realtek,rtl83xx-switch"; - }; -}; diff --git a/target/linux/realtek/image/Makefile b/target/linux/realtek/image/Makefile index 5900750797..5e4b4cde80 100644 --- a/target/linux/realtek/image/Makefile +++ b/target/linux/realtek/image/Makefile @@ -20,7 +20,7 @@ define Device/Default PROFILES = Default KERNEL := kernel-bin | append-dtb | gzip | uImage gzip KERNEL_INITRAMFS := kernel-bin | append-dtb | gzip | uImage gzip - DEVICE_DTS_DIR := ../dts + DEVICE_DTS_DIR := ../dts-$(KERNEL_PATCHVER) DEVICE_DTS = $$(SOC)_$(1) IMAGES := sysupgrade.bin IMAGE/sysupgrade.bin := append-kernel | pad-to 64k | append-rootfs | pad-rootfs | \