From: Gabor Juhos Date: Wed, 6 Jul 2011 08:04:52 +0000 (+0000) Subject: ramips: create factory image for the WHR-G300N board X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=0dc18d8586670bc6fa1f6bcc899d9695aed4efc0;p=openwrt%2Fstaging%2Fansuel.git ramips: create factory image for the WHR-G300N board SVN-Revision: 27474 --- diff --git a/target/linux/ramips/image/Makefile b/target/linux/ramips/image/Makefile index b1e856d893..2a841efce8 100644 --- a/target/linux/ramips/image/Makefile +++ b/target/linux/ramips/image/Makefile @@ -67,6 +67,28 @@ define BuildFirmware/Generic fi; fi endef +define BuildFirmware/Buffalo + $(call PatchKernelLzma,$(2),board=$(3) $($(4))) + $(call MkImage,lzma,"$(KDIR)/vmlinux-$(2).bin.lzma","$(KDIR)/vmlinux-$(2).uImage") + if [ `stat -c%s "$(KDIR)/vmlinux-$(2).uImage"` -gt $(5) ]; then \ + echo "Warning: $(KDIR)/vmlinux-$(2).uImage is too big"; \ + else if [ `stat -c%s $(KDIR)/root.$(1)` -gt $(6) ]; then \ + echo "Warning: $(KDIR)/root.$(1) is too big"; \ + else \ + buffalo-enc -p $(3) -v 1.76 \ + -i $(KDIR)/vmlinux-$(2).uImage \ + -o $(KDIR)/vmlinux-$(2).uImage.enc; \ + buffalo-enc -p $(3) -v 1.76 \ + -i $(KDIR)/root.$(1) \ + -o $(KDIR)/root.$(1).enc; \ + buffalo-tag -b $(3) -p $(3) -a ram -v 1.76 -m 1.01 \ + -l mlang8 -f 1 -r EU \ + -i $(KDIR)/vmlinux-$(2).uImage.enc \ + -i $(KDIR)/root.$(2).enc \ + -o $(call imgname,$(1),$(2))-factory-EU.bin; \ + fi; fi +endef + mtdlayout_4M=mtdparts=physmap-flash.0:192k(u-boot)ro,64k(u-boot-env)ro,64k(factory)ro,832k(kernel),2944k(rootfs),3776k@0x50000(firmware) define Image/Build/Template/GENERIC_4M $(call BuildFirmware/Generic,$(1),$(2),board=$(3),mtdlayout_4M,851968,3014656) @@ -103,8 +125,10 @@ define Image/Build/Profile/V22RW2X2 $(call Image/Build/Template/GENERIC_4M,$(1),v22rw-2x2,V22RW-2X2) endef +mtdlayout_whrg300n=mtdparts=physmap-flash.0:192k(u-boot)ro,64k(u-boot-env)ro,64k(factory)ro,960k(kernel),2752k(rootfs),64k(user)ro,3712k@0x50000(firmware) define Image/Build/Profile/WHRG300N $(call Image/Build/Template/GENERIC_4M,$(1),whr-g300n,WHR-G300N) + $(call BuildFirmware/Buffalo,$(1),whr-g300n,WHR-G300N,mtdlayout_whrg300n,983040,3801088) endef define Image/Build/Profile/HW5503G