From: John Crispin Date: Mon, 14 Sep 2015 20:12:16 +0000 (+0000) Subject: ar71xx: add TP-LINK TL-WDR3320 v2 support X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=0dbced8a484faeb8bea0c29a35c1b0f6d58dbf4c;p=openwrt%2Fstaging%2Flynxis%2Fomap.git ar71xx: add TP-LINK TL-WDR3320 v2 support This patch adds support for TP-LINK TL-WDR3320 v2. This router uses a chinese version 2 firmware header,. Signed-off-by: Weijie Gao SVN-Revision: 46934 --- diff --git a/target/linux/ar71xx/base-files/etc/diag.sh b/target/linux/ar71xx/base-files/etc/diag.sh index 54fca1353c..6d56de9205 100644 --- a/target/linux/ar71xx/base-files/etc/diag.sh +++ b/target/linux/ar71xx/base-files/etc/diag.sh @@ -262,6 +262,7 @@ get_status_led() { tl-wa901nd | \ tl-wa901nd-v2 | \ tl-wa901nd-v3 | \ + tl-wdr3320-v2 | \ tl-wdr3500 | \ tl-wr1041n-v2 | \ tl-wr1043nd | \ diff --git a/target/linux/ar71xx/base-files/etc/uci-defaults/01_leds b/target/linux/ar71xx/base-files/etc/uci-defaults/01_leds index c8eac126f3..4793e34d2e 100644 --- a/target/linux/ar71xx/base-files/etc/uci-defaults/01_leds +++ b/target/linux/ar71xx/base-files/etc/uci-defaults/01_leds @@ -437,6 +437,10 @@ tl-wa901nd-v2) ucidef_set_led_wlan "wlan" "WLAN" "tp-link:green:wlan" "phy0tpt" ;; +tl-wdr3320-v2) + ucidef_set_led_wlan "wlan5g" "WLAN5G" "tp-link:green:wlan5g" "phy0tpt" + ;; + tl-wdr3500) ucidef_set_led_usbdev "usb" "USB" "tp-link:green:usb" "1-1" ucidef_set_led_wlan "wlan2g" "WLAN2G" "tp-link:green:wlan2g" "phy0tpt" diff --git a/target/linux/ar71xx/base-files/etc/uci-defaults/02_network b/target/linux/ar71xx/base-files/etc/uci-defaults/02_network index d9053be5a4..509f0f1de2 100644 --- a/target/linux/ar71xx/base-files/etc/uci-defaults/02_network +++ b/target/linux/ar71xx/base-files/etc/uci-defaults/02_network @@ -436,6 +436,7 @@ tew-712br |\ tl-mr3220 |\ tl-mr3220-v2 |\ tl-mr3420 |\ +tl-wdr3320-v2 |\ tl-wdr3500 |\ tl-wr741nd |\ tl-wr741nd-v4 |\ diff --git a/target/linux/ar71xx/base-files/lib/ar71xx.sh b/target/linux/ar71xx/base-files/lib/ar71xx.sh index dcf7006d9e..9f41a2b7e8 100755 --- a/target/linux/ar71xx/base-files/lib/ar71xx.sh +++ b/target/linux/ar71xx/base-files/lib/ar71xx.sh @@ -221,6 +221,9 @@ tplink_board_detect() { "342000"*) model="TP-Link TL-MR3420" ;; + "332000"*) + model="TP-Link TL-WDR3320" + ;; "350000"*) model="TP-Link TL-WDR3500" ;; @@ -769,6 +772,9 @@ ar71xx_board_detect() { *"TL-WA901ND v3") name="tl-wa901nd-v3" ;; + *"TL-WDR3320 v2") + name="tl-wdr3320-v2" + ;; *"TL-WDR3500") name="tl-wdr3500" ;; diff --git a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh index 94cb97545c..b5ba47fb76 100755 --- a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh +++ b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh @@ -340,6 +340,7 @@ platform_check_image() { tl-wa901nd | \ tl-wa901nd-v2 | \ tl-wa901nd-v3 | \ + tl-wdr3320-v2 | \ tl-wdr3500 | \ tl-wdr4300 | \ tl-wdr4900-v2 | \ diff --git a/target/linux/ar71xx/config-4.1 b/target/linux/ar71xx/config-4.1 index 18df7862de..6c24806c63 100644 --- a/target/linux/ar71xx/config-4.1 +++ b/target/linux/ar71xx/config-4.1 @@ -123,6 +123,7 @@ CONFIG_ATH79_MACH_TL_WA830RE_V2=y CONFIG_ATH79_MACH_TL_WA901ND=y CONFIG_ATH79_MACH_TL_WA901ND_V2=y CONFIG_ATH79_MACH_TL_WAX50RE=y +CONFIG_ATH79_MACH_TL_WDR3320_V2=y CONFIG_ATH79_MACH_TL_WDR3500=y CONFIG_ATH79_MACH_TL_WDR4300=y CONFIG_ATH79_MACH_TL_WDR6500_V2=y diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wdr3320-v2.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wdr3320-v2.c new file mode 100644 index 0000000000..3e452f2a4a --- /dev/null +++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wdr3320-v2.c @@ -0,0 +1,146 @@ +/* + * TP-LINK TL-WDR3320 v2 board support + * + * Copyright (C) 2012 Gabor Juhos + * Copyright (C) 2015 Weijie Gao + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include +#include +#include +#include +#include + +#include + +#include "common.h" +#include "dev-ap9x-pci.h" +#include "dev-eth.h" +#include "dev-gpio-buttons.h" +#include "dev-leds-gpio.h" +#include "dev-m25p80.h" +#include "dev-spi.h" +#include "dev-usb.h" +#include "dev-wmac.h" +#include "machtypes.h" + +#define WDR3320_GPIO_LED_WLAN5G 12 +#define WDR3320_GPIO_LED_SYSTEM 14 +#define WDR3320_GPIO_LED_QSS 15 +#define WDR3320_GPIO_LED_WAN 4 +#define WDR3320_GPIO_LED_LAN1 18 +#define WDR3320_GPIO_LED_LAN2 20 +#define WDR3320_GPIO_LED_LAN3 21 +#define WDR3320_GPIO_LED_LAN4 22 + +#define WDR3320_GPIO_BTN_RESET 16 + +#define WDR3320_KEYS_POLL_INTERVAL 20 /* msecs */ +#define WDR3320_KEYS_DEBOUNCE_INTERVAL (3 * WDR3320_KEYS_POLL_INTERVAL) + +#define WDR3320_WMAC_CALDATA_OFFSET 0x1000 +#define WDR3320_PCIE_CALDATA_OFFSET 0x5000 + +static const char *wdr3320_part_probes[] = { + "tp-link", + NULL, +}; + +static struct flash_platform_data wdr3320_flash_data = { + .part_probes = wdr3320_part_probes, +}; + +static struct gpio_led wdr3320_leds_gpio[] __initdata = { + { + .name = "tp-link:green:qss", + .gpio = WDR3320_GPIO_LED_QSS, + .active_low = 1, + }, + { + .name = "tp-link:green:system", + .gpio = WDR3320_GPIO_LED_SYSTEM, + .active_low = 1, + }, + { + .name = "tp-link:green:wlan5g", + .gpio = WDR3320_GPIO_LED_WLAN5G, + .active_low = 1, + }, +}; + +static struct gpio_keys_button wdr3320_gpio_keys[] __initdata = { + { + .desc = "reset", + .type = EV_KEY, + .code = KEY_RESTART, + .debounce_interval = WDR3320_KEYS_DEBOUNCE_INTERVAL, + .gpio = WDR3320_GPIO_BTN_RESET, + .active_low = 1, + }, +}; + +static void __init wdr3320_setup(void) +{ + u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00); + u8 *art = (u8 *) KSEG1ADDR(0x1fff0000); + u8 tmpmac[ETH_ALEN]; + + ath79_register_m25p80(&wdr3320_flash_data); + ath79_register_leds_gpio(-1, ARRAY_SIZE(wdr3320_leds_gpio), + wdr3320_leds_gpio); + ath79_register_gpio_keys_polled(-1, WDR3320_KEYS_POLL_INTERVAL, + ARRAY_SIZE(wdr3320_gpio_keys), + wdr3320_gpio_keys); + + ath79_init_mac(tmpmac, mac, 0); + ath79_register_wmac(art + WDR3320_WMAC_CALDATA_OFFSET, tmpmac); + + ath79_init_mac(tmpmac, mac, -1); + ap9x_pci_setup_wmac_led_pin(0, 0); + ap91_pci_init(art + WDR3320_PCIE_CALDATA_OFFSET, tmpmac); + + ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_SW_ONLY_MODE); + + ath79_register_mdio(1, 0x0); + + /* LAN */ + ath79_init_mac(ath79_eth1_data.mac_addr, mac, 0); + + /* GMAC1 is connected to the internal switch */ + ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII; + + ath79_register_eth(1); + + /* WAN */ + ath79_init_mac(ath79_eth0_data.mac_addr, mac, 1); + + /* GMAC0 is connected to the PHY4 of the internal switch */ + ath79_switch_data.phy4_mii_en = 1; + ath79_switch_data.phy_poll_mask = BIT(4); + ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII; + ath79_eth0_data.phy_mask = BIT(4); + ath79_eth0_data.mii_bus_dev = &ath79_mdio1_device.dev; + + ath79_register_eth(0); + + ath79_register_usb(); + + ath79_gpio_output_select(WDR3320_GPIO_LED_LAN1, + AR934X_GPIO_OUT_LED_LINK0); + ath79_gpio_output_select(WDR3320_GPIO_LED_LAN2, + AR934X_GPIO_OUT_LED_LINK1); + ath79_gpio_output_select(WDR3320_GPIO_LED_LAN3, + AR934X_GPIO_OUT_LED_LINK2); + ath79_gpio_output_select(WDR3320_GPIO_LED_LAN4, + AR934X_GPIO_OUT_LED_LINK3); + ath79_gpio_output_select(WDR3320_GPIO_LED_WAN, + AR934X_GPIO_OUT_LED_LINK4); +} + +MIPS_MACHINE(ATH79_MACH_TL_WDR3320_V2, "TL-WDR3320-v2", + "TP-LINK TL-WDR3320 v2", + wdr3320_setup); diff --git a/target/linux/ar71xx/generic/profiles/tp-link.mk b/target/linux/ar71xx/generic/profiles/tp-link.mk index 05d10196d3..2875290e99 100644 --- a/target/linux/ar71xx/generic/profiles/tp-link.mk +++ b/target/linux/ar71xx/generic/profiles/tp-link.mk @@ -266,6 +266,17 @@ endef $(eval $(call Profile,TLWDR4300)) +define Profile/TLWDR3320V2 + NAME:=TP-LINK TL-WDR3320v2 + PACKAGES:=kmod-usb-core kmod-usb2 kmod-ledtrig-usbdev +endef + +define Profile/TLWDR3320V2/Description + Package set optimized for the TP-LINK TL-WDR3320v2. +endef +$(eval $(call Profile,TLWDR3320V2)) + + define Profile/TLWDR4900V2 NAME:=TP-LINK TL-WDR4900v2 PACKAGES:=kmod-usb-core kmod-usb2 kmod-ledtrig-usbdev diff --git a/target/linux/ar71xx/image/Makefile b/target/linux/ar71xx/image/Makefile index 60ede75929..0becd24857 100644 --- a/target/linux/ar71xx/image/Makefile +++ b/target/linux/ar71xx/image/Makefile @@ -53,6 +53,17 @@ define Build/mktplinkfw $(if $(findstring sysupgrade,$1),-s) && mv $@.new $@ || rm -f $@ endef +define Build/mktplinkfw-chn-v2 + -$(STAGING_DIR_HOST)/bin/mktplinkfw \ + -H $(TPLINK_HWID) -W $(TPLINK_HWREV) -F $(TPLINK_FLASHLAYOUT) -N OpenWrt -V $(REVISION) -m 2 \ + -k $(word 1,$^) \ + -r $@ \ + -o $@.new \ + -j -X 0x40000 \ + -a $(call rootfs_align,$(FILESYSTEM)) \ + $(if $(findstring sysupgrade,$1),-s) && mv $@.new $@ || rm -f $@ +endef + # -c combined image define Build/mktplinkfw-initramfs $(STAGING_DIR_HOST)/bin/mktplinkfw \ @@ -64,6 +75,16 @@ define Build/mktplinkfw-initramfs @mv $@.new $@ endef +define Build/mktplinkfw-initramfs-chn-v2 + $(STAGING_DIR_HOST)/bin/mktplinkfw \ + -H $(TPLINK_HWID) -W $(TPLINK_HWREV) -F $(TPLINK_FLASHLAYOUT) -N OpenWrt -V $(REVISION) -m 2 \ + -k $@ \ + -o $@.new \ + -s -S \ + -c + @mv $@.new $@ +endef + define Build/loader-common rm -rf $@.src $(MAKE) -C lzma-loader \ @@ -243,6 +264,15 @@ define Device/tplink IMAGE/factory.bin := append-rootfs | mktplinkfw factory endef +define Device/tplink-chn-v2 + TPLINK_HWREV := 0x1 + KERNEL := kernel-bin | patch-cmdline | lzma + KERNEL_INITRAMFS := kernel-bin | patch-cmdline | lzma | mktplinkfw-initramfs-chn-v2 + IMAGES := sysupgrade.bin factory.bin + IMAGE/sysupgrade.bin := append-rootfs | mktplinkfw-chn-v2 sysupgrade + IMAGE/factory.bin := append-rootfs | mktplinkfw-chn-v2 factory +endef + define Device/tplink-nolzma $(Device/tplink) LOADER_FLASH_OFFS := 0x22000 @@ -282,6 +312,12 @@ $(Device/tplink) IMAGE_SIZE := 15872k endef +define Device/tplink-chn-v2-4mlzma +$(Device/tplink-chn-v2) + TPLINK_FLASHLAYOUT := 4Mlzma + IMAGE_SIZE := 3904k +endef + define Device/tl-wdr4300-v1 $(Device/tplink-8mlzma) BOARDNAME = TL-WDR4300 @@ -314,7 +350,15 @@ define Device/mw4530r-v1 $(Device/tl-wdr4300-v1) TPLINK_HWID := 0x45300001 endef -TARGET_DEVICES += tl-wdr3500-v1 tl-wdr3600-v1 tl-wdr4300-v1 tl-wdr4300-v1-il tl-wdr4310-v1 mw4530r-v1 + +define Device/tl-wdr3320-v2 +$(Device/tplink-chn-v2-4mlzma) + BOARDNAME = TL-WDR3320-v2 + DEVICE_PROFILE = TLWDR3320V2 + TPLINK_HWID := 0x33200002 +endef + +TARGET_DEVICES += tl-wdr3500-v1 tl-wdr3600-v1 tl-wdr4300-v1 tl-wdr4300-v1-il tl-wdr4310-v1 mw4530r-v1 tl-wdr3320-v2 define Device/archer-c5 $(Device/tplink-16mlzma) diff --git a/target/linux/ar71xx/patches-4.1/816-MIPS-ath79-add-tl-wdr3320-v2-support.patch b/target/linux/ar71xx/patches-4.1/816-MIPS-ath79-add-tl-wdr3320-v2-support.patch new file mode 100644 index 0000000000..8d6d686d5b --- /dev/null +++ b/target/linux/ar71xx/patches-4.1/816-MIPS-ath79-add-tl-wdr3320-v2-support.patch @@ -0,0 +1,40 @@ +--- a/arch/mips/ath79/Kconfig ++++ b/arch/mips/ath79/Kconfig +@@ -1031,6 +1031,17 @@ + select ATH79_DEV_M25P80 + select ATH79_DEV_WMAC + ++config ATH79_MACH_TL_WDR3320_V2 ++ bool "TP-LINK TL-WDR3320 v2 board support" ++ select SOC_AR934X ++ select ATH79_DEV_AP9X_PCI if PCI ++ select ATH79_DEV_ETH ++ select ATH79_DEV_GPIO_BUTTONS ++ select ATH79_DEV_LEDS_GPIO ++ select ATH79_DEV_M25P80 ++ select ATH79_DEV_USB ++ select ATH79_DEV_WMAC ++ + config ATH79_MACH_TL_WDR3500 + bool "TP-LINK TL-WDR3500 board support" + select SOC_AR934X +--- a/arch/mips/ath79/machtypes.h ++++ b/arch/mips/ath79/machtypes.h +@@ -152,6 +152,7 @@ + ATH79_MACH_TL_WA901ND, /* TP-LINK TL-WA901ND */ + ATH79_MACH_TL_WA901ND_V2, /* TP-LINK TL-WA901ND v2 */ + ATH79_MACH_TL_WA901ND_V3, /* TP-LINK TL-WA901ND v3 */ ++ ATH79_MACH_TL_WDR3320_V2, /* TP-LINK TL-WDR3320 v2 */ + ATH79_MACH_TL_WDR3500, /* TP-LINK TL-WDR3500 */ + ATH79_MACH_TL_WDR4300, /* TP-LINK TL-WDR4300 */ + ATH79_MACH_TL_WDR6500_V2, /* TP-LINK TL-WDR6500 v2 */ +--- a/arch/mips/ath79/Makefile ++++ b/arch/mips/ath79/Makefile +@@ -128,6 +128,7 @@ + obj-$(CONFIG_ATH79_MACH_TL_WA830RE_V2) += mach-tl-wa830re-v2.o + obj-$(CONFIG_ATH79_MACH_TL_WA901ND) += mach-tl-wa901nd.o + obj-$(CONFIG_ATH79_MACH_TL_WA901ND_V2) += mach-tl-wa901nd-v2.o ++obj-$(CONFIG_ATH79_MACH_TL_WDR3320_V2) += mach-tl-wdr3320-v2.o + obj-$(CONFIG_ATH79_MACH_TL_WDR3500) += mach-tl-wdr3500.o + obj-$(CONFIG_ATH79_MACH_TL_WDR4300) += mach-tl-wdr4300.o + obj-$(CONFIG_ATH79_MACH_TL_WDR6500_V2) += mach-tl-wdr6500-v2.o