From: Gabor Juhos <juhosg@openwrt.org>
Date: Sun, 13 Apr 2014 08:29:09 +0000 (+0000)
Subject: ar71xx: add profile and build image for the ZyXEL NBG6716 board
X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=0d7197116ef8a46d6435db5229a04b7abe8508b6;p=openwrt%2Fstaging%2Fdedeckeh.git

ar71xx: add profile and build image for the ZyXEL NBG6716 board

Signed-off-by: André Valentin <avalentin@marcant.net>
Patchwork: http://patchwork.openwrt.org/patch/5101/
[juhosg: remove the non-existing zyxelnand subtarget specific stuff]
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 40502
---

diff --git a/target/linux/ar71xx/image/Makefile b/target/linux/ar71xx/image/Makefile
index 9295699e31..8234f88eaa 100644
--- a/target/linux/ar71xx/image/Makefile
+++ b/target/linux/ar71xx/image/Makefile
@@ -285,6 +285,8 @@ wndr4300_mtdlayout=mtdparts=ar934x-nfc:256k(u-boot)ro,256k(u-boot-env)ro,256k(ca
 zcn1523h_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,6208k(rootfs),1472k(kernel),64k(configure)ro,64k(mfg)ro,64k(art)ro,7680k@0x50000(firmware)
 mynet_n600_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,64k(devdata)ro,64k(devconf)ro,15872k(firmware),64k(radiocfg)ro
 mynet_rext_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,7808k(firmware),64k(nvram)ro,64k(ART)ro,6848k@0x130000(filesystem)
+zyx_nbg6716_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(env)ro,64k(RFdata)ro,-(nbu);ar934x-nfc:2048k(zyxel_rfsd),2048k(romd),1024k(header),2048k(kernel),-(ubiroot)
+
 
 define Image/BuildKernel
 	cp $(KDIR)/vmlinux.elf $(VMLINUX).elf
@@ -881,6 +883,43 @@ ifdef CONFIG_PACKAGE_uboot-ar71xx-nbg460n_550n_550nh
 endif
 
 
+define	Image/Build/ZyXELNAND/buildkernel
+	$(eval kernelsize=$(call mtdpartsize,kernel,$(5)))
+	$(call MkuImageLzma,$(2),$(3) $(5) $(6))
+	mkdir -p $(KDIR_TMP)/$(2)/image/boot
+	cp $(KDIR_TMP)/vmlinux-$(2).uImage $(KDIR_TMP)/$(2)/image/boot/vmlinux.lzma.uImage
+	$(STAGING_DIR_HOST)/bin/mkfs.jffs2 \
+		--pad=$(kernelsize) --big-endian --squash-uids -v -e 128KiB \
+		-o $(KDIR_TMP)/$(2)-kernel.jffs2 \
+		-d $(KDIR_TMP)/$(2)/image \
+		2>&1 1>/dev/null | awk '/^.+$$$$/'
+	-rm -rf $(KDIR_TMP)/$(2)
+endef
+
+define Image/Build/ZyXELNAND
+	if [ "$(1)" != "squashfs" ]; then \
+		echo Only squashfs is supported; \
+		return 0; \
+	fi
+	$(eval firmwaresize=$(call mtdpartsize,firmware,$(4)))
+	$(eval kernelsize=$(call mtdpartsize,kernel,$(4)))
+	$(eval imageraw=$(KDIR_TMP)/$(2)-raw.img)
+	$(CP) $(KDIR)/root.$(1) $(KDIR_TMP)/ubi_root.img
+	echo -ne '\xde\xad\xc0\xde' > $(KDIR_TMP)/jffs2.eof
+	$(call ubinize,ubinize-$(2).ini,$(KDIR_TMP),$(KDIR_TMP)/$(2)-root.ubi,128KiB,2048,-E 5)
+	( \
+		dd if=$(KDIR_TMP)/$(2)-kernel.jffs2; \
+		dd if=$(KDIR_TMP)/$(2)-root.ubi \
+	) > $(imageraw)
+	dd if=$(imageraw) of=$(BIN_DIR)/$(IMG_PREFIX)-$(2)-$(1)-factory.bin \
+		bs=128k conv=sync
+	( \
+		dd if=$(KDIR_TMP)/$(2)-kernel.jffs2; \
+		dd if=$(KDIR)/root.$(1) bs=128k conv=sync \
+	) > $(BIN_DIR)/$(IMG_PREFIX)-$(2)-$(1)-sysupgrade.bin
+endef
+
+
 Image/Build/OpenMesh/buildkernel=$(call MkuImageLzma,$(2))
 
 define Image/Build/OpenMesh
@@ -1180,6 +1219,8 @@ ifeq ($(SUBTARGET),nand)
 $(eval $(call SingleProfile,NetgearNAND,64k,WNDR3700V4,wndr3700v4,WNDR4300,ttyS0,115200,$$(wndr4300_mtdlayout),0x33373033,WNDR3700V4,"",-H 29763948+128+128,wndr4300))
 $(eval $(call SingleProfile,NetgearNAND,64k,WNDR4300V1,wndr4300,WNDR4300,ttyS0,115200,$$(wndr4300_mtdlayout),0x33373033,WNDR4300,"",-H 29763948+0+128+128+2x2+3x3,wndr4300))
 
+$(eval $(call SingleProfile,ZyXELNAND,128k,NBG6716,nbg6716,NBG6716,ttyS0,115200,NBG6716,$$(zyx_nbg6716_mtdlayout),ubi.mtd=ubiroot mem=256M))
+
 $(eval $(call MultiProfile,WNDR4300,WNDR3700V4 WNDR4300V1))
 endif # ifeq ($(SUBTARGET),nand)
 
diff --git a/target/linux/ar71xx/image/ubinize-nbg6716.ini b/target/linux/ar71xx/image/ubinize-nbg6716.ini
new file mode 100644
index 0000000000..ec8d7c7fc6
--- /dev/null
+++ b/target/linux/ar71xx/image/ubinize-nbg6716.ini
@@ -0,0 +1,29 @@
+[rootfs]
+# Volume mode (other option is static)
+mode=ubi
+# Source image
+image=ubi_root.img
+# Volume ID in UBI image
+vol_id=0
+# Allow for dynamic resize
+vol_type=dynamic
+# Volume name
+vol_name=rootfs
+# Autoresize volume at first mount
+# vol_flags=autoresize
+vol_size=40MiB
+
+[rootfs_data]
+# Volume mode (other option is static)
+mode=ubi
+# Source image
+image=jffs2.eof
+# Volume ID in UBI image
+vol_id=1
+# Allow for dynamic resize
+vol_type=dynamic
+# Volume name
+vol_name=rootfs_data
+# Autoresize volume at first mount
+vol_size=100MiB
+#vol_flags=autoresize
diff --git a/target/linux/ar71xx/nand/profiles/zyxel.mk b/target/linux/ar71xx/nand/profiles/zyxel.mk
new file mode 100644
index 0000000000..ec813e548f
--- /dev/null
+++ b/target/linux/ar71xx/nand/profiles/zyxel.mk
@@ -0,0 +1,18 @@
+#
+# Copyright (C) 2009 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
+define Profile/NBG6716
+	NAME:=Zyxel NBG 6716
+	PACKAGES:=kmod-rtc-pcf8563 kmod-ath10k
+endef
+
+define Profile/NBG6716/Description
+	Package set optimized for the Zyxel NBG 6716 Routers.
+endef
+
+$(eval $(call Profile,NBG6716))
+