From: Koen Vandeputte Date: Mon, 15 Oct 2018 09:19:43 +0000 (+0200) Subject: kernel: bump 4.14 to 4.14.76 X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=0d0bd8e6da9d93d8b8ae6a936d564fbeb39c6f77;p=openwrt%2Fstaging%2Fluka.git kernel: bump 4.14 to 4.14.76 Refreshed all patches. Compile-tested on: ar71xx, cns3xxx, imx6 Runtime-tested on: ar71xx, cns3xxx, imx6 Signed-off-by: Koen Vandeputte --- diff --git a/include/kernel-version.mk b/include/kernel-version.mk index f874160742..5cb3742523 100644 --- a/include/kernel-version.mk +++ b/include/kernel-version.mk @@ -4,11 +4,11 @@ LINUX_RELEASE?=1 LINUX_VERSION-3.18 = .124 LINUX_VERSION-4.9 = .133 -LINUX_VERSION-4.14 = .75 +LINUX_VERSION-4.14 = .76 LINUX_KERNEL_HASH-3.18.124 = 25d2a5abd627534a1e51d028890c184aad8e628c345c5fe0cc0f9d7c31b7a5a3 LINUX_KERNEL_HASH-4.9.133 = 53730fc025ba330a6f4908a6a1e4cb86d821000c84167721680ccf1b37b26563 -LINUX_KERNEL_HASH-4.14.75 = 5093d7230b8f1c553450ca6c1ccd20a46a055d9277a7e161039a8642b3398120 +LINUX_KERNEL_HASH-4.14.76 = ee3f19a4ff8a42793c193e361e1d34fcc821a5ca9b58db41befb2b4df0e482be remove_uri_prefix=$(subst git://,,$(subst http://,,$(subst https://,,$(1)))) sanitize_uri=$(call qstrip,$(subst @,_,$(subst :,_,$(subst .,_,$(subst -,_,$(subst /,_,$(1))))))) diff --git a/target/linux/apm821xx/patches-4.14/801-usb-xhci-add-firmware-loader-for-uPD720201-and-uPD72.patch b/target/linux/apm821xx/patches-4.14/801-usb-xhci-add-firmware-loader-for-uPD720201-and-uPD72.patch index e8154253a3..5d9b1f6061 100644 --- a/target/linux/apm821xx/patches-4.14/801-usb-xhci-add-firmware-loader-for-uPD720201-and-uPD72.patch +++ b/target/linux/apm821xx/patches-4.14/801-usb-xhci-add-firmware-loader-for-uPD720201-and-uPD72.patch @@ -44,7 +44,7 @@ Signed-off-by: Christian Lamparter #include "xhci.h" #include "xhci-trace.h" -@@ -255,6 +257,458 @@ static void xhci_pme_acpi_rtd3_enable(st +@@ -257,6 +259,458 @@ static void xhci_pme_acpi_rtd3_enable(st static void xhci_pme_acpi_rtd3_enable(struct pci_dev *dev) { } #endif /* CONFIG_ACPI */ @@ -503,7 +503,7 @@ Signed-off-by: Christian Lamparter /* called during probe() after chip reset completes */ static int xhci_pci_setup(struct usb_hcd *hcd) { -@@ -290,6 +744,22 @@ static int xhci_pci_probe(struct pci_dev +@@ -292,6 +746,22 @@ static int xhci_pci_probe(struct pci_dev struct hc_driver *driver; struct usb_hcd *hcd; @@ -526,7 +526,7 @@ Signed-off-by: Christian Lamparter driver = (struct hc_driver *)id->driver_data; /* For some HW implementation, a XHCI reset is just not enough... */ -@@ -354,6 +824,16 @@ static void xhci_pci_remove(struct pci_d +@@ -356,6 +826,16 @@ static void xhci_pci_remove(struct pci_d { struct xhci_hcd *xhci; diff --git a/target/linux/apm821xx/patches-4.14/802-usb-xhci-force-msi-renesas-xhci.patch b/target/linux/apm821xx/patches-4.14/802-usb-xhci-force-msi-renesas-xhci.patch index c09d1547bd..141b839d68 100644 --- a/target/linux/apm821xx/patches-4.14/802-usb-xhci-force-msi-renesas-xhci.patch +++ b/target/linux/apm821xx/patches-4.14/802-usb-xhci-force-msi-renesas-xhci.patch @@ -13,7 +13,7 @@ produce a noisy warning. --- a/drivers/usb/host/xhci-pci.c +++ b/drivers/usb/host/xhci-pci.c -@@ -213,7 +213,7 @@ static void xhci_pci_quirks(struct devic +@@ -215,7 +215,7 @@ static void xhci_pci_quirks(struct devic xhci->quirks |= XHCI_TRUST_TX_LENGTH; if (pdev->vendor == PCI_VENDOR_ID_RENESAS && pdev->device == 0x0015) diff --git a/target/linux/generic/hack-4.14/902-debloat_proc.patch b/target/linux/generic/hack-4.14/902-debloat_proc.patch index e89786b47a..54c9bd40a0 100644 --- a/target/linux/generic/hack-4.14/902-debloat_proc.patch +++ b/target/linux/generic/hack-4.14/902-debloat_proc.patch @@ -243,7 +243,7 @@ Signed-off-by: Felix Fietkau } --- a/mm/vmstat.c +++ b/mm/vmstat.c -@@ -1944,10 +1944,12 @@ void __init init_mm_internals(void) +@@ -1947,10 +1947,12 @@ void __init init_mm_internals(void) start_shepherd_timer(); #endif #ifdef CONFIG_PROC_FS diff --git a/target/linux/mediatek/patches-4.14/0191-usb-xhci-allow-imod-interval-to-be-configurable.patch b/target/linux/mediatek/patches-4.14/0191-usb-xhci-allow-imod-interval-to-be-configurable.patch index 5230487739..ded3916c5c 100644 --- a/target/linux/mediatek/patches-4.14/0191-usb-xhci-allow-imod-interval-to-be-configurable.patch +++ b/target/linux/mediatek/patches-4.14/0191-usb-xhci-allow-imod-interval-to-be-configurable.patch @@ -86,7 +86,7 @@ Signed-off-by: Greg Kroah-Hartman if (!xhci->shared_hcd) { --- a/drivers/usb/host/xhci-pci.c +++ b/drivers/usb/host/xhci-pci.c -@@ -266,6 +266,9 @@ static int xhci_pci_setup(struct usb_hcd +@@ -268,6 +268,9 @@ static int xhci_pci_setup(struct usb_hcd if (!xhci->sbrn) pci_read_config_byte(pdev, XHCI_SBRN_OFFSET, &xhci->sbrn); diff --git a/target/linux/mpc85xx/patches-4.14/001-powerpc-85xx-add-gpio-keys-to-of-match-table.patch b/target/linux/mpc85xx/patches-4.14/001-powerpc-85xx-add-gpio-keys-to-of-match-table.patch index ee0c4d784d..58c4be6007 100644 --- a/target/linux/mpc85xx/patches-4.14/001-powerpc-85xx-add-gpio-keys-to-of-match-table.patch +++ b/target/linux/mpc85xx/patches-4.14/001-powerpc-85xx-add-gpio-keys-to-of-match-table.patch @@ -1,10 +1,10 @@ --- a/arch/powerpc/platforms/85xx/common.c +++ b/arch/powerpc/platforms/85xx/common.c @@ -33,6 +33,7 @@ static const struct of_device_id mpc85xx - { .compatible = "fsl,mpc8548-guts", }, - /* Probably unnecessary? */ - { .compatible = "gpio-leds", }, + { .compatible = "fsl,mpc8548-guts", }, + /* Probably unnecessary? */ + { .compatible = "gpio-leds", }, + { .compatible = "gpio-keys", }, - /* For all PCI controllers */ - { .compatible = "fsl,mpc8540-pci", }, - { .compatible = "fsl,mpc8548-pcie", }, + /* For all PCI controllers */ + { .compatible = "fsl,mpc8540-pci", }, + { .compatible = "fsl,mpc8548-pcie", }, diff --git a/target/linux/mpc85xx/patches-4.14/100-powerpc-85xx-tl-wdr4900-v1-support.patch b/target/linux/mpc85xx/patches-4.14/100-powerpc-85xx-tl-wdr4900-v1-support.patch index b99d0da863..8b627fb729 100644 --- a/target/linux/mpc85xx/patches-4.14/100-powerpc-85xx-tl-wdr4900-v1-support.patch +++ b/target/linux/mpc85xx/patches-4.14/100-powerpc-85xx-tl-wdr4900-v1-support.patch @@ -22,7 +22,7 @@ Signed-off-by: Gabor Juhos src-plat-$(CONFIG_PPC_IBM_CELL_BLADE) += pseries-head.S src-plat-$(CONFIG_MVME7100) += motload-head.S mvme7100.c +src-plat-$(CONFIG_TL_WDR4900_V1) += cuboot-tl-wdr4900-v1.c - + src-wlib := $(sort $(src-wlib-y)) src-plat := $(sort $(src-plat-y)) @@ -330,7 +331,7 @@ image-$(CONFIG_TQM8555) += cuImage.tqm @@ -33,7 +33,7 @@ Signed-off-by: Gabor Juhos +image-$(CONFIG_TL_WDR4900_V1) += cuImage.tl-wdr4900-v1 # Board ports in arch/powerpc/platform/86xx/Kconfig image-$(CONFIG_MVME7100) += dtbImage.mvme7100 - + --- a/arch/powerpc/boot/wrapper +++ b/arch/powerpc/boot/wrapper @@ -277,6 +277,10 @@ cuboot*) @@ -50,9 +50,9 @@ Signed-off-by: Gabor Juhos --- a/arch/powerpc/platforms/85xx/Kconfig +++ b/arch/powerpc/platforms/85xx/Kconfig @@ -170,6 +170,17 @@ config STX_GP3 - select CPM2 - select DEFAULT_UIMAGE - + select CPM2 + select DEFAULT_UIMAGE + +config TL_WDR4900_V1 + bool "TP-Link TL-WDR4900 v1" + select DEFAULT_UIMAGE @@ -65,8 +65,8 @@ Signed-off-by: Gabor Juhos + Freescale P1014 SoC. + config TQM8540 - bool "TQ Components TQM8540" - help + bool "TQ Components TQM8540" + help --- a/arch/powerpc/platforms/85xx/Makefile +++ b/arch/powerpc/platforms/85xx/Makefile @@ -26,6 +26,7 @@ obj-$(CONFIG_CORENET_GENERIC) += coren diff --git a/target/linux/mpc85xx/patches-4.14/101-powerpc-85xx-hiveap-330-support.patch b/target/linux/mpc85xx/patches-4.14/101-powerpc-85xx-hiveap-330-support.patch index 519566bc15..34568398c2 100644 --- a/target/linux/mpc85xx/patches-4.14/101-powerpc-85xx-hiveap-330-support.patch +++ b/target/linux/mpc85xx/patches-4.14/101-powerpc-85xx-hiveap-330-support.patch @@ -1,9 +1,9 @@ --- a/arch/powerpc/platforms/85xx/Kconfig +++ b/arch/powerpc/platforms/85xx/Kconfig @@ -49,6 +49,17 @@ config BSC9132_QDS - and dual StarCore SC3850 DSP cores. - Manufacturer : Freescale Semiconductor, Inc - + and dual StarCore SC3850 DSP cores. + Manufacturer : Freescale Semiconductor, Inc + +config HIVEAP_330 + bool "Aerohive HiveAP-330" + select DEFAULT_UIMAGE @@ -16,8 +16,8 @@ + Freescale P1020 SoC. + config MPC8540_ADS - bool "Freescale MPC8540 ADS" - select DEFAULT_UIMAGE + bool "Freescale MPC8540 ADS" + select DEFAULT_UIMAGE --- a/arch/powerpc/platforms/85xx/Makefile +++ b/arch/powerpc/platforms/85xx/Makefile @@ -10,6 +10,7 @@ obj-y += common.o diff --git a/target/linux/mpc85xx/patches-4.14/102-powerpc-add-cmdline-override.patch b/target/linux/mpc85xx/patches-4.14/102-powerpc-add-cmdline-override.patch index 7f4fa249d0..a3b69bbbb3 100644 --- a/target/linux/mpc85xx/patches-4.14/102-powerpc-add-cmdline-override.patch +++ b/target/linux/mpc85xx/patches-4.14/102-powerpc-add-cmdline-override.patch @@ -1,9 +1,9 @@ --- a/arch/powerpc/Kconfig +++ b/arch/powerpc/Kconfig @@ -830,6 +830,14 @@ config CMDLINE_FORCE - This is useful if you cannot or don't want to change the - command-line options your boot loader passes to the kernel. - + This is useful if you cannot or don't want to change the + command-line options your boot loader passes to the kernel. + +config CMDLINE_OVERRIDE + bool "Use alternative cmdline from device tree" + help @@ -13,14 +13,14 @@ + cmdline if it exists in the device tree. + config EXTRA_TARGETS - string "Additional default image types" - help + string "Additional default image types" + help --- a/drivers/of/fdt.c +++ b/drivers/of/fdt.c @@ -1131,6 +1131,17 @@ int __init early_init_dt_scan_chosen(uns - if (p != NULL && l > 0) - strlcpy(data, p, min((int)l, COMMAND_LINE_SIZE)); - + if (p != NULL && l > 0) + strlcpy(data, p, min((int)l, COMMAND_LINE_SIZE)); + + /* CONFIG_CMDLINE_OVERRIDE is used to fallback to a different + * device tree option of chosen/bootargs-override. This is + * helpful on boards where u-boot sets bootargs, and is unable @@ -32,6 +32,6 @@ + strlcpy(data, p, min((int)l, COMMAND_LINE_SIZE)); +#endif + - /* - * CONFIG_CMDLINE is meant to be a default in case nothing else - * managed to set the command line, unless CONFIG_CMDLINE_FORCE + /* + * CONFIG_CMDLINE is meant to be a default in case nothing else + * managed to set the command line, unless CONFIG_CMDLINE_FORCE