From: Neil Zhang Date: Fri, 24 Feb 2012 02:14:40 +0000 (+0800) Subject: usb: host: remove ehci-pxa168.c X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=0cedc4e1c870d5d4811b3ed2aca98b41334f10e4;p=openwrt%2Fstaging%2Fblogic.git usb: host: remove ehci-pxa168.c Since ehci-mv.c can cover Marvell PXA and MMP series including PXA168, so this driver seems redundant now. Signed-off-by: Neil Zhang Cc: Acked-by: Alan Stern Signed-off-by: Greg Kroah-Hartman --- diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig index 353cdd488b93..b11b09fd61c3 100644 --- a/drivers/usb/host/Kconfig +++ b/drivers/usb/host/Kconfig @@ -606,10 +606,3 @@ config USB_OCTEON_OHCI config USB_OCTEON2_COMMON bool default y if USB_OCTEON_EHCI || USB_OCTEON_OHCI - -config USB_PXA168_EHCI - bool "Marvell PXA168 on-chip EHCI HCD support" - depends on USB_EHCI_HCD && ARCH_MMP - help - Enable support for Marvell PXA168 SoC's on-chip EHCI - host controller diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c index 4918b0c59af9..06e2548b549c 100644 --- a/drivers/usb/host/ehci-hcd.c +++ b/drivers/usb/host/ehci-hcd.c @@ -1361,11 +1361,6 @@ MODULE_LICENSE ("GPL"); #define PLATFORM_DRIVER ehci_grlib_driver #endif -#ifdef CONFIG_USB_PXA168_EHCI -#include "ehci-pxa168.c" -#define PLATFORM_DRIVER ehci_pxa168_driver -#endif - #ifdef CONFIG_CPU_XLR #include "ehci-xls.c" #define PLATFORM_DRIVER ehci_xls_driver diff --git a/drivers/usb/host/ehci-pxa168.c b/drivers/usb/host/ehci-pxa168.c deleted file mode 100644 index 8d0e7a22e711..000000000000 --- a/drivers/usb/host/ehci-pxa168.c +++ /dev/null @@ -1,363 +0,0 @@ -/* - * drivers/usb/host/ehci-pxa168.c - * - * Tanmay Upadhyay - * - * Based on drivers/usb/host/ehci-orion.c - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#include -#include -#include -#include -#include - -#define USB_PHY_CTRL_REG 0x4 -#define USB_PHY_PLL_REG 0x8 -#define USB_PHY_TX_REG 0xc - -#define FBDIV_SHIFT 4 - -#define ICP_SHIFT 12 -#define ICP_15 2 -#define ICP_20 3 -#define ICP_25 4 - -#define KVCO_SHIFT 15 - -#define PLLCALI12_SHIFT 25 -#define CALI12_VDD 0 -#define CALI12_09 1 -#define CALI12_10 2 -#define CALI12_11 3 - -#define PLLVDD12_SHIFT 27 -#define VDD12_VDD 0 -#define VDD12_10 1 -#define VDD12_11 2 -#define VDD12_12 3 - -#define PLLVDD18_SHIFT 29 -#define VDD18_19 0 -#define VDD18_20 1 -#define VDD18_21 2 -#define VDD18_22 3 - - -#define PLL_READY (1 << 23) -#define VCOCAL_START (1 << 21) -#define REG_RCAL_START (1 << 12) - -struct pxa168_usb_drv_data { - struct ehci_hcd ehci; - struct clk *pxa168_usb_clk; - struct resource *usb_phy_res; - void __iomem *usb_phy_reg_base; -}; - -static int ehci_pxa168_setup(struct usb_hcd *hcd) -{ - struct ehci_hcd *ehci = hcd_to_ehci(hcd); - int retval; - - ehci_reset(ehci); - retval = ehci_halt(ehci); - if (retval) - return retval; - - /* - * data structure init - */ - retval = ehci_init(hcd); - if (retval) - return retval; - - hcd->has_tt = 1; - - ehci_port_power(ehci, 0); - - return retval; -} - -static const struct hc_driver ehci_pxa168_hc_driver = { - .description = hcd_name, - .product_desc = "Marvell PXA168 EHCI", - .hcd_priv_size = sizeof(struct pxa168_usb_drv_data), - - /* - * generic hardware linkage - */ - .irq = ehci_irq, - .flags = HCD_MEMORY | HCD_USB2, - - /* - * basic lifecycle operations - */ - .reset = ehci_pxa168_setup, - .start = ehci_run, - .stop = ehci_stop, - .shutdown = ehci_shutdown, - - /* - * managing i/o requests and associated device resources - */ - .urb_enqueue = ehci_urb_enqueue, - .urb_dequeue = ehci_urb_dequeue, - .endpoint_disable = ehci_endpoint_disable, - .endpoint_reset = ehci_endpoint_reset, - - /* - * scheduling support - */ - .get_frame_number = ehci_get_frame, - - /* - * root hub support - */ - .hub_status_data = ehci_hub_status_data, - .hub_control = ehci_hub_control, - .bus_suspend = ehci_bus_suspend, - .bus_resume = ehci_bus_resume, - .relinquish_port = ehci_relinquish_port, - .port_handed_over = ehci_port_handed_over, - - .clear_tt_buffer_complete = ehci_clear_tt_buffer_complete, -}; - -static int pxa168_usb_phy_init(struct platform_device *pdev) -{ - struct resource *res; - void __iomem *usb_phy_reg_base; - struct pxa168_usb_pdata *pdata; - struct pxa168_usb_drv_data *drv_data; - struct usb_hcd *hcd = platform_get_drvdata(pdev); - unsigned long reg_val; - int pll_retry_cont = 10000, err = 0; - - drv_data = (struct pxa168_usb_drv_data *)hcd->hcd_priv; - pdata = (struct pxa168_usb_pdata *)pdev->dev.platform_data; - - res = platform_get_resource(pdev, IORESOURCE_MEM, 1); - if (!res) { - dev_err(&pdev->dev, - "Found HC with no PHY register addr. Check %s setup!\n", - dev_name(&pdev->dev)); - return -ENODEV; - } - - if (!request_mem_region(res->start, resource_size(res), - ehci_pxa168_hc_driver.description)) { - dev_dbg(&pdev->dev, "controller already in use\n"); - return -EBUSY; - } - - usb_phy_reg_base = ioremap(res->start, resource_size(res)); - if (usb_phy_reg_base == NULL) { - dev_dbg(&pdev->dev, "error mapping memory\n"); - err = -EFAULT; - goto err1; - } - drv_data->usb_phy_reg_base = usb_phy_reg_base; - drv_data->usb_phy_res = res; - - /* If someone wants to init USB phy in board specific way */ - if (pdata && pdata->phy_init) - return pdata->phy_init(usb_phy_reg_base); - - /* Power up the PHY and PLL */ - writel(readl(usb_phy_reg_base + USB_PHY_CTRL_REG) | 0x3, - usb_phy_reg_base + USB_PHY_CTRL_REG); - - /* Configure PHY PLL */ - reg_val = readl(usb_phy_reg_base + USB_PHY_PLL_REG) & ~(0x7e03ffff); - reg_val |= (VDD18_22 << PLLVDD18_SHIFT | VDD12_12 << PLLVDD12_SHIFT | - CALI12_11 << PLLCALI12_SHIFT | 3 << KVCO_SHIFT | - ICP_15 << ICP_SHIFT | 0xee << FBDIV_SHIFT | 0xb); - writel(reg_val, usb_phy_reg_base + USB_PHY_PLL_REG); - - /* Make sure PHY PLL is ready */ - while (!(readl(usb_phy_reg_base + USB_PHY_PLL_REG) & PLL_READY)) { - if (!(pll_retry_cont--)) { - dev_dbg(&pdev->dev, "USB PHY PLL not ready\n"); - err = -EIO; - goto err2; - } - } - - /* Toggle VCOCAL_START bit of U2PLL for PLL calibration */ - udelay(200); - writel(readl(usb_phy_reg_base + USB_PHY_PLL_REG) | VCOCAL_START, - usb_phy_reg_base + USB_PHY_PLL_REG); - udelay(40); - writel(readl(usb_phy_reg_base + USB_PHY_PLL_REG) & ~VCOCAL_START, - usb_phy_reg_base + USB_PHY_PLL_REG); - - /* Toggle REG_RCAL_START bit of U2PTX for impedance calibration */ - udelay(400); - writel(readl(usb_phy_reg_base + USB_PHY_TX_REG) | REG_RCAL_START, - usb_phy_reg_base + USB_PHY_TX_REG); - udelay(40); - writel(readl(usb_phy_reg_base + USB_PHY_TX_REG) & ~REG_RCAL_START, - usb_phy_reg_base + USB_PHY_TX_REG); - - /* Make sure PHY PLL is ready again */ - pll_retry_cont = 0; - while (!(readl(usb_phy_reg_base + USB_PHY_PLL_REG) & PLL_READY)) { - if (!(pll_retry_cont--)) { - dev_dbg(&pdev->dev, "USB PHY PLL not ready\n"); - err = -EIO; - goto err2; - } - } - - return 0; -err2: - iounmap(usb_phy_reg_base); -err1: - release_mem_region(res->start, resource_size(res)); - return err; -} - -static int __devinit ehci_pxa168_drv_probe(struct platform_device *pdev) -{ - struct resource *res; - struct usb_hcd *hcd; - struct ehci_hcd *ehci; - struct pxa168_usb_drv_data *drv_data; - void __iomem *regs; - int irq, err = 0; - - if (usb_disabled()) - return -ENODEV; - - pr_debug("Initializing pxa168-SoC USB Host Controller\n"); - - irq = platform_get_irq(pdev, 0); - if (irq <= 0) { - dev_err(&pdev->dev, - "Found HC with no IRQ. Check %s setup!\n", - dev_name(&pdev->dev)); - err = -ENODEV; - goto err1; - } - - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!res) { - dev_err(&pdev->dev, - "Found HC with no register addr. Check %s setup!\n", - dev_name(&pdev->dev)); - err = -ENODEV; - goto err1; - } - - if (!request_mem_region(res->start, resource_size(res), - ehci_pxa168_hc_driver.description)) { - dev_dbg(&pdev->dev, "controller already in use\n"); - err = -EBUSY; - goto err1; - } - - regs = ioremap(res->start, resource_size(res)); - if (regs == NULL) { - dev_dbg(&pdev->dev, "error mapping memory\n"); - err = -EFAULT; - goto err2; - } - - hcd = usb_create_hcd(&ehci_pxa168_hc_driver, - &pdev->dev, dev_name(&pdev->dev)); - if (!hcd) { - err = -ENOMEM; - goto err3; - } - - drv_data = (struct pxa168_usb_drv_data *)hcd->hcd_priv; - - /* Enable USB clock */ - drv_data->pxa168_usb_clk = clk_get(&pdev->dev, "PXA168-USBCLK"); - if (IS_ERR(drv_data->pxa168_usb_clk)) { - dev_err(&pdev->dev, "Couldn't get USB clock\n"); - err = PTR_ERR(drv_data->pxa168_usb_clk); - goto err4; - } - clk_enable(drv_data->pxa168_usb_clk); - - err = pxa168_usb_phy_init(pdev); - if (err) { - dev_err(&pdev->dev, "USB PHY initialization failed\n"); - goto err5; - } - - hcd->rsrc_start = res->start; - hcd->rsrc_len = resource_size(res); - hcd->regs = regs; - - ehci = hcd_to_ehci(hcd); - ehci->caps = hcd->regs + 0x100; - ehci->regs = hcd->regs + 0x100 + - HC_LENGTH(ehci, ehci_readl(ehci, &ehci->caps->hc_capbase)); - ehci->hcs_params = ehci_readl(ehci, &ehci->caps->hcs_params); - hcd->has_tt = 1; - ehci->sbrn = 0x20; - - err = usb_add_hcd(hcd, irq, IRQF_SHARED | IRQF_DISABLED); - if (err) - goto err5; - - return 0; - -err5: - clk_disable(drv_data->pxa168_usb_clk); - clk_put(drv_data->pxa168_usb_clk); -err4: - usb_put_hcd(hcd); -err3: - iounmap(regs); -err2: - release_mem_region(res->start, resource_size(res)); -err1: - dev_err(&pdev->dev, "init %s fail, %d\n", - dev_name(&pdev->dev), err); - - return err; -} - -static int __exit ehci_pxa168_drv_remove(struct platform_device *pdev) -{ - struct usb_hcd *hcd = platform_get_drvdata(pdev); - struct pxa168_usb_drv_data *drv_data = - (struct pxa168_usb_drv_data *)hcd->hcd_priv; - - usb_remove_hcd(hcd); - - /* Power down PHY & PLL */ - writel(readl(drv_data->usb_phy_reg_base + USB_PHY_CTRL_REG) & (~0x3), - drv_data->usb_phy_reg_base + USB_PHY_CTRL_REG); - - clk_disable(drv_data->pxa168_usb_clk); - clk_put(drv_data->pxa168_usb_clk); - - iounmap(hcd->regs); - release_mem_region(hcd->rsrc_start, hcd->rsrc_len); - - iounmap(drv_data->usb_phy_reg_base); - release_mem_region(drv_data->usb_phy_res->start, - resource_size(drv_data->usb_phy_res)); - - usb_put_hcd(hcd); - - return 0; -} - -MODULE_ALIAS("platform:pxa168-ehci"); - -static struct platform_driver ehci_pxa168_driver = { - .probe = ehci_pxa168_drv_probe, - .remove = __exit_p(ehci_pxa168_drv_remove), - .shutdown = usb_hcd_platform_shutdown, - .driver.name = "pxa168-ehci", -};