From: Joseph C. Lehner Date: Wed, 25 Jan 2017 16:57:56 +0000 (+0100) Subject: ramips: fix EX2700 wireless mac X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=0cc04d05f653c01a6018306a5d03a7339ab2508c;p=openwrt%2Fstaging%2Fluka.git ramips: fix EX2700 wireless mac On some EX2700 devices, the MAC address from the eeprom data differs from the actual MAC address. Fix that, and cleanup the DTS file while we're at it. Signed-off-by: Joseph C. Lehner --- diff --git a/target/linux/ramips/dts/EX2700.dts b/target/linux/ramips/dts/EX2700.dts index 348ca789d1..6c66c2009d 100644 --- a/target/linux/ramips/dts/EX2700.dts +++ b/target/linux/ramips/dts/EX2700.dts @@ -13,6 +13,7 @@ #include "mt7620a.dtsi" #include +#include / { compatible = "ralink,mt7620a-soc"; @@ -27,38 +28,38 @@ power_g { label = "ex2700:green:power"; - gpios = <&gpio0 9 1>; + gpios = <&gpio0 9 GPIO_ACTIVE_LOW>; default-state = "on"; }; power_r { label = "ex2700:red:power"; - gpios = <&gpio0 11 1>; + gpios = <&gpio0 11 GPIO_ACTIVE_LOW>; }; device_g { label = "ex2700:green:device"; - gpios = <&gpio0 13 1>; + gpios = <&gpio0 13 GPIO_ACTIVE_LOW>; }; device_r { label = "ex2700:red:device"; - gpios = <&gpio0 10 1>; + gpios = <&gpio0 10 GPIO_ACTIVE_LOW>; }; router_g { label = "ex2700:green:router"; - gpios = <&gpio0 12 1>; + gpios = <&gpio0 12 GPIO_ACTIVE_LOW>; }; router_r { label = "ex2700:red:router"; - gpios = <&gpio0 14 1>; + gpios = <&gpio0 14 GPIO_ACTIVE_LOW>; }; wps { label = "ex2700:green:wps"; - gpios = <&gpio1 15 1>; + gpios = <&gpio1 15 GPIO_ACTIVE_LOW>; }; }; @@ -70,13 +71,13 @@ reset { label = "reset"; - gpios = <&gpio0 1 1>; + gpios = <&gpio0 1 GPIO_ACTIVE_LOW>; linux,code = ; }; wps { label = "wps"; - gpios = <&gpio0 2 1>; + gpios = <&gpio0 2 GPIO_ACTIVE_LOW>; linux,code = ; }; }; @@ -98,7 +99,6 @@ #size-cells = <1>; compatible = "jedec,spi-nor"; reg = <0>; - linux,modalias = "m25p80", "mx25l3205d"; spi-max-frequency = <10000000>; partition@0 { @@ -131,15 +131,13 @@ }; &wmac { + mtd-mac-address = <&art 0x6>; ralink,mtd-eeprom = <&art 0x1000>; }; &pinctrl { state_default: pinctrl0 { default { - // spi refclk: pins 37, 38, 39 - // uartf: pins 8, 9, 10, 11, 12, 13, 14 - // i2c: pins 1, 2 ralink,group = "i2c", "uartf", "spi refclk"; ralink,function = "gpio"; };