From: Frederik Noe-Sdun Date: Mon, 29 Jul 2019 18:23:28 +0000 (+0200) Subject: ramips: add support for Netgear EX6130 X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=0cbd2c74d0c9f41d07757907226e5cfeaf16e06a;p=openwrt%2Fstaging%2Fneocturne.git ramips: add support for Netgear EX6130 Specifications: * SoC: MT7620A * RAM: 64 MB DDR * Flash: 8MB NOR SPI flash * WiFi: MT7612E (5Ghz) and builtin MT7620A (2.4GHz) * LAN: 1x100M The -factory images can be flashed from the device's web interface or via nmrpflash. The device seems to use base PCB as EX3700/EX3800, but supporting AC1200 using MT7612E. MAC adresses: 5.0 GHz 0x8004 *:9a 2.4 GHz 0x4 *:9b lan 0x28 *:9b wan 0x2e *:9c Since this is a one-port device, although wan MAC address is set in flash, it is not used in OpenWrt setup. Signed-off-by: Frederik Noe-Sdun [rebased, extended commit message, tiny DTS style fixes] Signed-off-by: Adrian Schmutzler --- diff --git a/target/linux/ramips/dts/mt7620a_netgear_ex3700.dts b/target/linux/ramips/dts/mt7620a_netgear_ex3700.dts index 311f27781d..f657e926cb 100644 --- a/target/linux/ramips/dts/mt7620a_netgear_ex3700.dts +++ b/target/linux/ramips/dts/mt7620a_netgear_ex3700.dts @@ -2,10 +2,7 @@ /dts-v1/; -#include -#include - -#include "mt7620a.dtsi" +#include "mt7620a_netgear_ex3700_ex6130.dtsi" / { compatible = "netgear,ex3700", "ralink,mt7620a-soc"; @@ -18,10 +15,6 @@ led-upgrade = &led_power_green; }; - chosen { - bootargs = "console=ttyS0,57600"; - }; - leds { compatible = "gpio-leds"; @@ -61,109 +54,4 @@ gpios = <&gpio2 27 GPIO_ACTIVE_LOW>; }; }; - - keys { - compatible = "gpio-keys"; - - reset { - label = "reset"; - gpios = <&gpio2 26 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - - wps { - label = "wps"; - gpios = <&gpio0 2 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - }; -}; - -&gpio0 { - status = "okay"; -}; - -&gpio2 { - status = "okay"; -}; - -&spi0 { - status = "okay"; - - m25p80@0 { - compatible = "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <10000000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "u-boot"; - reg = <0x0 0x30000>; - read-only; - }; - - partition@30000 { - label = "config"; - reg = <0x30000 0x10000>; - read-only; - }; - - factory: partition@40000 { - label = "factory"; - reg = <0x40000 0x10000>; - read-only; - }; - - partition@50000 { - compatible = "denx,uimage"; - label = "firmware"; - reg = <0x50000 0x790000>; - }; - - partition@7e0000 { - label = "board_data"; - reg = <0x7e0000 0x10000>; - read-only; - }; - - partition@7f0000 { - label = "nvram"; - reg = <0x7f0000 0x10000>; - read-only; - }; - }; - }; -}; - -&pcie { - status = "okay"; -}; - -&pcie0 { - mt76@0,0 { - reg = <0x0000 0 0 0 0 >; - mediatek,mtd-eeprom = <&factory 0x8000>; - ieee80211-freq-limit = <5000000 6000000>; - }; -}; - -ðernet { - mtd-mac-address = <&factory 0x28>; -}; - -&wmac { - ralink,mtd-eeprom = <&factory 0x0>; -}; - -&pinctrl { - state_default: pinctrl0 { - default { - ralink,group = "i2c", "rgmii2", "spi refclk"; - ralink,function = "gpio"; - }; - }; }; diff --git a/target/linux/ramips/dts/mt7620a_netgear_ex3700_ex6130.dtsi b/target/linux/ramips/dts/mt7620a_netgear_ex3700_ex6130.dtsi new file mode 100644 index 0000000000..a2d44e8941 --- /dev/null +++ b/target/linux/ramips/dts/mt7620a_netgear_ex3700_ex6130.dtsi @@ -0,0 +1,115 @@ +#include +#include + +#include "mt7620a.dtsi" + +/ { + chosen { + bootargs = "console=ttyS0,57600"; + }; + + keys { + compatible = "gpio-keys"; + + reset { + label = "reset"; + gpios = <&gpio2 26 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + + wps { + label = "wps"; + gpios = <&gpio0 2 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + }; +}; + +&gpio0 { + status = "okay"; +}; + +&gpio2 { + status = "okay"; +}; + +&spi0 { + status = "okay"; + + m25p80@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <10000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x30000>; + read-only; + }; + + partition@30000 { + label = "config"; + reg = <0x30000 0x10000>; + read-only; + }; + + factory: partition@40000 { + label = "factory"; + reg = <0x40000 0x10000>; + read-only; + }; + + partition@50000 { + compatible = "denx,uimage"; + label = "firmware"; + reg = <0x50000 0x790000>; + }; + + partition@7e0000 { + label = "board_data"; + reg = <0x7e0000 0x10000>; + read-only; + }; + + partition@7f0000 { + label = "nvram"; + reg = <0x7f0000 0x10000>; + read-only; + }; + }; + }; +}; + +&pcie { + status = "okay"; +}; + +&pcie0 { + mt76@0,0 { + reg = <0x0000 0 0 0 0>; + mediatek,mtd-eeprom = <&factory 0x8000>; + ieee80211-freq-limit = <5000000 6000000>; + }; +}; + +ðernet { + mtd-mac-address = <&factory 0x28>; +}; + +&wmac { + ralink,mtd-eeprom = <&factory 0x0>; +}; + +&pinctrl { + state_default: pinctrl0 { + default { + ralink,group = "i2c", "rgmii2", "spi refclk"; + ralink,function = "gpio"; + }; + }; +}; diff --git a/target/linux/ramips/dts/mt7620a_netgear_ex6130.dts b/target/linux/ramips/dts/mt7620a_netgear_ex6130.dts new file mode 100644 index 0000000000..68dd3f65d3 --- /dev/null +++ b/target/linux/ramips/dts/mt7620a_netgear_ex6130.dts @@ -0,0 +1,57 @@ +/* This file is released into the public domain */ + +/dts-v1/; + +#include "mt7620a_netgear_ex3700_ex6130.dtsi" + +/ { + compatible = "netgear,ex6130", "ralink,mt7620a-soc"; + model = "Netgear EX6130"; + + aliases { + led-boot = &led_power_green; + led-failsafe = &led_power_green; + led-running = &led_power_green; + led-upgrade = &led_power_green; + }; + + leds { + compatible = "gpio-leds"; + + led_power_green: power_g { + label = "ex6130:green:power"; + gpios = <&gpio2 23 GPIO_ACTIVE_LOW>; + default-state = "on"; + }; + + power_a { + label = "ex6130:amber:power"; + gpios = <&gpio2 28 GPIO_ACTIVE_LOW>; + }; + + router_g { + label = "ex6130:green:router"; + gpios = <&gpio2 25 GPIO_ACTIVE_LOW>; + }; + + router_r { + label = "ex6130:red:router"; + gpios = <&gpio2 24 GPIO_ACTIVE_LOW>; + }; + + device_g { + label = "ex6130:green:device"; + gpios = <&gpio2 20 GPIO_ACTIVE_LOW>; + }; + + device_r { + label = "ex6130:red:device"; + gpios = <&gpio2 21 GPIO_ACTIVE_LOW>; + }; + + wps { + label = "ex6130:green:wps"; + gpios = <&gpio2 27 GPIO_ACTIVE_LOW>; + }; + }; +}; diff --git a/target/linux/ramips/image/mt7620.mk b/target/linux/ramips/image/mt7620.mk index 88437a6904..d3de3074b2 100644 --- a/target/linux/ramips/image/mt7620.mk +++ b/target/linux/ramips/image/mt7620.mk @@ -612,6 +612,19 @@ define Device/netgear_ex3700 endef TARGET_DEVICES += netgear_ex3700 +define Device/netgear_ex6130 + MTK_SOC := mt7620a + NETGEAR_BOARD_ID := U12H319T50_NETGEAR + BLOCKSIZE := 4k + IMAGE_SIZE := 7744k + IMAGES += factory.chk + IMAGE/factory.chk := $$(sysupgrade_bin) | check-size $$$$(IMAGE_SIZE) | netgear-chk + DEVICE_PACKAGES := kmod-mt76x2 + DEVICE_VENDOR := NETGEAR + DEVICE_MODEL := EX6130 +endef +TARGET_DEVICES += netgear_ex6130 + define Device/netgear_wn3000rp-v3 MTK_SOC := mt7620a IMAGE_SIZE := 7872k diff --git a/target/linux/ramips/mt7620/base-files/etc/board.d/01_leds b/target/linux/ramips/mt7620/base-files/etc/board.d/01_leds index 6d6dcde6af..59f0fe8dab 100755 --- a/target/linux/ramips/mt7620/base-files/etc/board.d/01_leds +++ b/target/linux/ramips/mt7620/base-files/etc/board.d/01_leds @@ -155,7 +155,8 @@ netgear,ex2700|\ netgear,wn3000rp-v3) set_wifi_led "$boardname:green:router" ;; -netgear,ex3700) +netgear,ex3700|\ +netgear,ex6130) ucidef_set_led_netdev "wlan5g" "ROUTER (green)" "$boardname:green:router" "wlan0" ucidef_set_led_netdev "wlan2g" "DEVICE (green)" "$boardname:green:device" "wlan1" ;; diff --git a/target/linux/ramips/mt7620/base-files/etc/board.d/02_network b/target/linux/ramips/mt7620/base-files/etc/board.d/02_network index 94600bb437..dfca48e123 100755 --- a/target/linux/ramips/mt7620/base-files/etc/board.d/02_network +++ b/target/linux/ramips/mt7620/base-files/etc/board.d/02_network @@ -39,6 +39,7 @@ ramips_setup_interfaces() kimax,u25awf-h1|\ netgear,ex2700|\ netgear,ex3700|\ + netgear,ex6130|\ netgear,wn3000rp-v3|\ planex,cs-qr10|\ planex,mzk-ex300np|\