From: Nick Hainke Date: Sat, 18 Jun 2022 12:42:08 +0000 (+0200) Subject: ath79: TP-Link EAP225-Outdoor v1: use pre-calibration nvmem-cell X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=0cb851cad13a231761024d7a08e0798bd0aa08e9;p=openwrt%2Fstaging%2Frobimarko.git ath79: TP-Link EAP225-Outdoor v1: use pre-calibration nvmem-cell Fixes errors in the form of: ath10k_pci 0000:00:00.0: failed to fetch board data for bus=pci, vendor=168c,device=0056,subsystem-vendor=0000,subsystem-device =0000 from ath10k/QCA9888/hw2.0/board-2.bin ath10k_pci 0000:00:00.0: failed to fetch board-2.bin or board.bin from ath10k/QCA9888/hw2.0 ath10k_pci 0000:00:00.0: failed to fetch board file: -12 ath10k_pci 0000:00:00.0: could not probe fw (-12) As described already in 2d3321619b2b ("ath79: TP-Link EAP245 v3: use pre-calibration nvmem-cell"): Ath10k Wave-2 hardware requires an nvmem-cell called "pre-calibration" to load the device specific caldata, not "calibration". Further rename the nvmem cell node and label to match the updated cell name. Fixes: 23b904074500 ("ath79: TP-Link EAP225-Outdoor v1: convert ath10k to nvmem-cells") Suggested-by: Sander Vanheule Signed-off-by: Nick Hainke --- diff --git a/target/linux/ath79/dts/qca9563_tplink_eap225-outdoor-v1.dts b/target/linux/ath79/dts/qca9563_tplink_eap225-outdoor-v1.dts index 0b376bf657..79c45f1ea8 100644 --- a/target/linux/ath79/dts/qca9563_tplink_eap225-outdoor-v1.dts +++ b/target/linux/ath79/dts/qca9563_tplink_eap225-outdoor-v1.dts @@ -30,7 +30,7 @@ }; &art { - calibration_ath10k: calibration@5000 { + precalibration_ath10k: pre-calibration@5000 { reg = <0x5000 0x2f20>; }; }; @@ -54,7 +54,7 @@ mac-address-increment = <1>; - nvmem-cells = <&macaddr_info_8>, <&calibration_ath10k>; - nvmem-cell-names = "mac-address", "calibration"; + nvmem-cells = <&macaddr_info_8>, <&precalibration_ath10k>; + nvmem-cell-names = "mac-address", "pre-calibration"; }; };