From: Yanase Yuki Date: Wed, 31 May 2023 07:41:59 +0000 (+0900) Subject: ipq40xx: convert Buffalo WTR-M2133HP to DSA X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=0c15f45fa71feb4eb32f7961446df286cdfc319b;p=openwrt%2Fstaging%2Fblocktrron.git ipq40xx: convert Buffalo WTR-M2133HP to DSA This commit convert WTR-M2133HP to DSA setup. Signed-off-by: Yanase Yuki (cherry picked from commit edb3a4162c0763ecc9d5e7660700a68a25bf28e3) --- diff --git a/target/linux/ipq40xx/base-files/etc/board.d/02_network b/target/linux/ipq40xx/base-files/etc/board.d/02_network index d6b19c981e..b131d0d618 100644 --- a/target/linux/ipq40xx/base-files/etc/board.d/02_network +++ b/target/linux/ipq40xx/base-files/etc/board.d/02_network @@ -82,6 +82,7 @@ ipq40xx_setup_interfaces() ucidef_set_interface_lan "sw-eth1 sw-eth2" ;; aruba,ap-303h|\ + buffalo,wtr-m2133hp|\ ezviz,cs-w3-wd1200g-eup|\ netgear,rbr50|\ netgear,rbs50|\ diff --git a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-wtr-m2133hp.dts b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-wtr-m2133hp.dts index f1d58ccba9..3260de23bd 100644 --- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-wtr-m2133hp.dts +++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-wtr-m2133hp.dts @@ -417,6 +417,35 @@ qcom,ath10k-calibration-variant = "Buffalo-WTR-M2133HP"; }; +&switch { + status = "okay"; +}; + +&swport2 { + status = "okay"; + label = "lan3"; +}; + +&swport3 { + status = "okay"; + label = "lan2"; +}; + +&swport4 { + status = "okay"; + label = "lan1"; +}; + +&swport5 { + status = "okay"; +}; + +&gmac { + status = "okay"; + nvmem-cell-names = "mac-address"; + nvmem-cells = <&macaddr_orgdata_20>; +}; + &mdio { status = "okay"; pinctrl-0 = <&mdio_pins>; diff --git a/target/linux/ipq40xx/image/generic.mk b/target/linux/ipq40xx/image/generic.mk index 7c7a4acc5c..59d4f082ff 100644 --- a/target/linux/ipq40xx/image/generic.mk +++ b/target/linux/ipq40xx/image/generic.mk @@ -305,8 +305,7 @@ define Device/buffalo_wtr-m2133hp BLOCKSIZE := 128k PAGESIZE := 2048 endef -# Missing DSA Setup -#TARGET_DEVICES += buffalo_wtr-m2133hp +TARGET_DEVICES += buffalo_wtr-m2133hp define Device/cellc_rtl30vw KERNEL_SUFFIX := -zImage.itb