From: Kim DoHyoung <azusahmr@k-on.kr>
Date: Thu, 11 Aug 2022 08:13:35 +0000 (+0000)
Subject: ramips: mt7621: add support for Zbtlink ZBT-WG1608 (32M)
X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=0bbd5699c81d6887c4d895e85b56d8c23b1211ec;p=openwrt%2Fstaging%2Fblogic.git

ramips: mt7621: add support for Zbtlink ZBT-WG1608 (32M)

Zbtlink ZBT-WG1608 is a Wi-Fi router intendent to use with WWAN (4G/5G)
modems.

Specifications:
* SoC: MediaTek MT7621A
* RAM: 256/512 MiB
* Flash: 16/32 MiB (SPI NOR)
* Wi-Fi:
  * MediaTek MT7603E : 2.4Ghz
  * MediaTek MT7613BE : 5Ghz
* Ethernet: 10/100/1000 Mbps Ethernet x5 ports (4xLAN + WAN)
* M.2: 1x slot with USB&SIM
  * EM7455/EM12-G/EM160R/RM500Q-AE
* USB: 1x 3.0 Type-A port
* External storage: 1x microSD (SDXC) slot
* UART: console (115200 baud)
* LED:
  * 1 power indicator
  * 1 WLAN 2.4G controlled (wlan 2G)
  * 3 SoC controlled (wlan 5G, wwan, internet)
  * 5 per Eth phy (4xLAN + WAN)

MAC Addresses:
* LAN    : f8:5e:3c:xx:xx:e0 (Factory, 0xe000 (hex))
* WAN    : f8:5e:3c:xx:xx:e1 (Factory, 0xe006 (hex))
* 2.4 GHz: f8:5e:3c:xx:xx:de (Factory, 0x0004 (hex))
* 5 GHz  : f8:5e:3c:xx:xx:df (Factory, 0x8004 (hex))

Installation:
* Vendor's firmware is OpenWrt (LEDE) based, so the sysupgrade image can
  be directly used to install OpenWrt. Firmware must be upgraded using the
  'force' and 'do not save configuration' command line options (or
  correspondig web interface checkboxes) since the vendor firmware is from
  the pre-DSA era.

Recovery Mode:
 * Press reset button, power up the device, wait for about 10sec.
 * Upload sysupgrade image through the firmware recovery mode web page at
  192.168.1.1.

Signed-off-by: Kim DoHyoung <azusahmr@k-on.kr>
---

diff --git a/target/linux/ramips/dts/mt7621_zbtlink_zbt-wg1608-32m.dts b/target/linux/ramips/dts/mt7621_zbtlink_zbt-wg1608-32m.dts
new file mode 100644
index 000000000000..00feec2ff3da
--- /dev/null
+++ b/target/linux/ramips/dts/mt7621_zbtlink_zbt-wg1608-32m.dts
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "mt7621_zbtlink_zbt-wg1608.dtsi"
+
+/ {
+	compatible = "zbtlink,zbt-wg1608-32m", "mediatek,mt7621-soc";
+	model = "Zbtlink ZBT-WG1608 (32M)";
+};
+
+&flash0 {
+	broken-flash-reset;
+};
+
+&firmware {
+	reg = <0x50000 0x1fb0000>;
+};
diff --git a/target/linux/ramips/dts/mt7621_zbtlink_zbt-wg1608.dtsi b/target/linux/ramips/dts/mt7621_zbtlink_zbt-wg1608.dtsi
index 59fab90ed1d2..303708fab0e8 100644
--- a/target/linux/ramips/dts/mt7621_zbtlink_zbt-wg1608.dtsi
+++ b/target/linux/ramips/dts/mt7621_zbtlink_zbt-wg1608.dtsi
@@ -61,7 +61,7 @@
 &spi0 {
 	status = "okay";
 
-	flash@0 {
+	flash0: flash@0 {
 		compatible = "jedec,spi-nor";
 		reg = <0>;
 		spi-max-frequency = <50000000>;
diff --git a/target/linux/ramips/image/mt7621.mk b/target/linux/ramips/image/mt7621.mk
index b8fa0cefdb3f..a5b69839a7b9 100644
--- a/target/linux/ramips/image/mt7621.mk
+++ b/target/linux/ramips/image/mt7621.mk
@@ -2706,6 +2706,18 @@ define Device/zbtlink_zbt-wg1608-16m
 endef
 TARGET_DEVICES += zbtlink_zbt-wg1608-16m
 
+define Device/zbtlink_zbt-wg1608-32m
+  $(Device/dsa-migration)
+  $(Device/uimage-lzma-loader)
+  IMAGE_SIZE := 32448k
+  DEVICE_VENDOR := Zbtlink
+  DEVICE_MODEL := ZBT-WG1608
+  DEVICE_VARIANT := 32M
+  DEVICE_PACKAGES := kmod-sdhci-mt7620 kmod-mt7603 kmod-mt7615e \
+	kmod-mt7663-firmware-ap kmod-usb3 kmod-usb-ledtrig-usbport
+endef
+TARGET_DEVICES += zbtlink_zbt-wg1608-32m
+
 define Device/zbtlink_zbt-wg2626
   $(Device/dsa-migration)
   $(Device/uimage-lzma-loader)