From: Christian Lamparter <chunkeey@gmail.com>
Date: Fri, 21 Jul 2023 14:44:11 +0000 (+0200)
Subject: ath79: AP105: use fixed layout cell "mac-base"
X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=0ba5c0bdc1ebddb50ab34806343d77baf54044be;p=openwrt%2Fstaging%2Fthess.git

ath79: AP105: use fixed layout cell "mac-base"

This drops a use of the deprecated "mac-address-increment".

Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
---

diff --git a/target/linux/ath79/dts/ar7161_aruba_ap-105.dts b/target/linux/ath79/dts/ar7161_aruba_ap-105.dts
index 949d70ec07..32d403fe6c 100644
--- a/target/linux/ath79/dts/ar7161_aruba_ap-105.dts
+++ b/target/linux/ath79/dts/ar7161_aruba_ap-105.dts
@@ -96,9 +96,8 @@
 
 	ath9k0: wifi@0,11 { /* 2.4 GHz */
 		compatible = "pci168c,0029";
-		nvmem-cells = <&macaddr_hwinfo_1c>;
+		nvmem-cells = <&macaddr_hwinfo_1c 1>;
 		nvmem-cell-names = "mac-address";
-		mac-address-increment = <1>;
 		reg = <0x8800 0 0 0 0>;
 		#gpio-cells = <2>;
 		gpio-controller;
@@ -106,9 +105,8 @@
 
 	ath9k1: wifi@0,12 { /* 5 GHz */
 		compatible = "pci168c,0029";
-		nvmem-cells = <&macaddr_hwinfo_1c>;
+		nvmem-cells = <&macaddr_hwinfo_1c 2>;
 		nvmem-cell-names = "mac-address";
-		mac-address-increment = <2>;
 		reg = <0x9000 0 0 0 0>;
 		#gpio-cells = <2>;
 		gpio-controller;
@@ -125,7 +123,7 @@
 
 &eth0 {
 	status = "okay";
-	nvmem-cells = <&macaddr_hwinfo_1c>;
+	nvmem-cells = <&macaddr_hwinfo_1c 0>;
 	nvmem-cell-names = "mac-address";
 
 	pll-data = <0x00110000 0x00001099 0x00991099>;
@@ -160,9 +158,22 @@
 			};
 
 			hwinfo: partition@fe0000 {
-				label = "hwinfo";
 				reg = <0xfe0000 0x10000>;
+				compatible = "nvmem-cells";
+				label = "hwinfo";
 				read-only;
+
+				nvmem-layout {
+					compatible = "fixed-layout";
+					#address-cells = <1>;
+					#size-cells = <1>;
+
+					macaddr_hwinfo_1c: mac-address@1c {
+						compatible = "mac-base";
+						reg = <0x1c 0x6>;
+						#nvmem-cell-cells = <1>;
+					};
+				};
 			};
 
 			partition@ff0000 {
@@ -173,13 +184,3 @@
 		};
 	};
 };
-
-&hwinfo {
-	compatible = "nvmem-cells";
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	macaddr_hwinfo_1c: macaddr@1c {
-		reg = <0x1c 0x6>;
-	};
-};