From: Maciej W. Rozycki <macro@linux-mips.org>
Date: Thu, 7 Feb 2008 08:15:08 +0000 (-0800)
Subject: dz: don't panic() when request_irq() fails
X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=0ba137e23e8d8f5cb15778b44be281c5687afc49;p=openwrt%2Fstaging%2Fblogic.git

dz: don't panic() when request_irq() fails

Well, panic() is a little bit undue if request_irq() fails; there is probably
no need to justify it any further.  Handle the case gracefully, by
unregistering the driver.

Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org>
Cc: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---

diff --git a/drivers/serial/dz.c b/drivers/serial/dz.c
index e1a2e413eb7d..fb6f27302935 100644
--- a/drivers/serial/dz.c
+++ b/drivers/serial/dz.c
@@ -794,18 +794,28 @@ static int __init dz_init(void)
 	dz_reset(&dz_ports[0]);
 #endif
 
-	if (request_irq(dz_ports[0].port.irq, dz_interrupt,
-			IRQF_DISABLED, "DZ", &dz_ports[0]))
-		panic("Unable to register DZ interrupt");
-
 	ret = uart_register_driver(&dz_reg);
 	if (ret != 0)
-		return ret;
+		goto out;
+
+	ret = request_irq(dz_ports[0].port.irq, dz_interrupt, IRQF_DISABLED,
+			  "DZ", &dz_ports[0]);
+	if (ret != 0) {
+		printk(KERN_ERR "dz: Cannot get IRQ %d!\n",
+		       dz_ports[0].port.irq);
+		goto out_unregister;
+	}
 
 	for (i = 0; i < DZ_NB_PORT; i++)
 		uart_add_one_port(&dz_reg, &dz_ports[i].port);
 
 	return ret;
+
+out_unregister:
+	uart_unregister_driver(&dz_reg);
+
+out:
+	return ret;
 }
 
 module_init(dz_init);