From: Hauke Mehrtens Date: Sun, 9 Aug 2015 11:09:52 +0000 (+0000) Subject: kernel: update 3.18 to 3.18.20 X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=0b8643af4fa7eebd55b63d6d547f85da1409f83d;p=openwrt%2Fstaging%2Fdangole.git kernel: update 3.18 to 3.18.20 Changelog: * https://www.kernel.org/pub/linux/kernel/v3.x/ChangeLog-3.18.20 Signed-off-by: Hauke Mehrtens SVN-Revision: 46570 --- diff --git a/include/kernel-version.mk b/include/kernel-version.mk index 9f68716a11..8937cd0db8 100644 --- a/include/kernel-version.mk +++ b/include/kernel-version.mk @@ -2,11 +2,11 @@ LINUX_RELEASE?=1 -LINUX_VERSION-3.18 = .19 +LINUX_VERSION-3.18 = .20 LINUX_VERSION-4.0 = .9 LINUX_VERSION-4.1 = .4 -LINUX_KERNEL_MD5SUM-3.18.19 = a143f9421bd8413752609d0d771c2955 +LINUX_KERNEL_MD5SUM-3.18.20 = 952c9159acdf4efbc96e08a27109d994 LINUX_KERNEL_MD5SUM-4.0.9 = 40fc5f6e2d718e539b45e6601c71985b LINUX_KERNEL_MD5SUM-4.1.4 = 32cb4dd9f14d37bf71bafa6ed368f769 diff --git a/target/linux/brcm63xx/patches-3.18/571-board_fast2704n.patch b/target/linux/brcm63xx/patches-3.18/571-board_fast2704n.patch index 7b8b727803..f4e0fbf4c1 100644 --- a/target/linux/brcm63xx/patches-3.18/571-board_fast2704n.patch +++ b/target/linux/brcm63xx/patches-3.18/571-board_fast2704n.patch @@ -1,6 +1,6 @@ --- a/arch/mips/bcm63xx/boards/board_bcm963xx.c +++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c -@@ -225,6 +225,46 @@ static struct board_info __initdata board_dsl_2751b_d1 = { +@@ -225,6 +225,46 @@ static struct board_info __initdata boar .num_board_fixups = ARRAY_SIZE(dsl2751b_e1_fixups), }, }; @@ -47,7 +47,7 @@ #endif /* CONFIG_BCM63XX_CPU_6318 */ /* -@@ -2352,6 +2392,7 @@ static const struct board_info __initconst *bcm963xx_boards[] = { +@@ -2352,6 +2392,7 @@ static const struct board_info __initcon &board_96318ref, &board_96318ref_p300, &board_dsl_2751b_d1, @@ -55,7 +55,7 @@ #endif #ifdef CONFIG_BCM63XX_CPU_6328 &board_96328avng, -@@ -2449,6 +2490,7 @@ static struct of_device_id const bcm963xx_boards_dt[] = { +@@ -2449,6 +2490,7 @@ static struct of_device_id const bcm963x { .compatible = "brcm,bcm96318ref", .data = &board_96318ref, }, { .compatible = "brcm,bcm96318ref_p300", .data = &board_96318ref_p300, }, { .compatible = "d-link,dsl-275xb-d", .data = &board_dsl_2751b_d1, }, diff --git a/target/linux/generic/patches-3.18/834-ledtrig-libata.patch b/target/linux/generic/patches-3.18/834-ledtrig-libata.patch index 7d234eaed0..1360ce9fb8 100644 --- a/target/linux/generic/patches-3.18/834-ledtrig-libata.patch +++ b/target/linux/generic/patches-3.18/834-ledtrig-libata.patch @@ -69,7 +69,7 @@ Signed-off-by: Daniel Golle /** * ata_build_rw_tf - Build ATA taskfile for given read/write request * @tf: Target ATA taskfile -@@ -4756,6 +4769,9 @@ static struct ata_queued_cmd *ata_qc_new +@@ -4761,6 +4774,9 @@ static struct ata_queued_cmd *ata_qc_new break; } } @@ -79,7 +79,7 @@ Signed-off-by: Daniel Golle return qc; } -@@ -5666,6 +5682,9 @@ struct ata_port *ata_port_alloc(struct a +@@ -5671,6 +5687,9 @@ struct ata_port *ata_port_alloc(struct a ap->stats.unhandled_irq = 1; ap->stats.idle_irq = 1; #endif @@ -89,7 +89,7 @@ Signed-off-by: Daniel Golle ata_sff_port_init(ap); return ap; -@@ -5687,6 +5706,12 @@ static void ata_host_release(struct devi +@@ -5692,6 +5711,12 @@ static void ata_host_release(struct devi kfree(ap->pmp_link); kfree(ap->slave_link); @@ -102,7 +102,7 @@ Signed-off-by: Daniel Golle kfree(ap); host->ports[i] = NULL; } -@@ -6133,7 +6158,23 @@ int ata_host_register(struct ata_host *h +@@ -6138,7 +6163,23 @@ int ata_host_register(struct ata_host *h host->ports[i]->print_id = atomic_inc_return(&ata_print_id); host->ports[i]->local_port_no = i + 1; } @@ -138,7 +138,7 @@ Signed-off-by: Daniel Golle /* * Define if arch has non-standard setup. This is a _PCI_ standard -@@ -871,6 +874,12 @@ struct ata_port { +@@ -872,6 +875,12 @@ struct ata_port { #ifdef CONFIG_ATA_ACPI struct ata_acpi_gtm __acpi_init_gtm; /* use ata_acpi_init_gtm() */ #endif diff --git a/target/linux/oxnas/patches-3.18/999-libata-hacks.patch b/target/linux/oxnas/patches-3.18/999-libata-hacks.patch index 702a336155..b3ff7fa241 100644 --- a/target/linux/oxnas/patches-3.18/999-libata-hacks.patch +++ b/target/linux/oxnas/patches-3.18/999-libata-hacks.patch @@ -15,7 +15,7 @@ /* initialize internal qc */ /* XXX: Tag 0 is used for drivers with legacy EH as some -@@ -4752,6 +4760,9 @@ static struct ata_queued_cmd *ata_qc_new +@@ -4757,6 +4765,9 @@ static struct ata_queued_cmd *ata_qc_new if (unlikely(ap->pflags & ATA_PFLAG_FROZEN)) return NULL; @@ -25,7 +25,7 @@ for (i = 0, tag = ap->last_tag + 1; i < max_queue; i++, tag++) { if (ap->flags & ATA_FLAG_LOWTAG) tag = i; -@@ -4824,6 +4835,8 @@ void ata_qc_free(struct ata_queued_cmd * +@@ -4829,6 +4840,8 @@ void ata_qc_free(struct ata_queued_cmd * if (likely(ata_tag_valid(tag))) { qc->tag = ATA_TAG_POISON; clear_bit(tag, &ap->qc_allocated); @@ -36,7 +36,7 @@ --- a/include/linux/libata.h +++ b/include/linux/libata.h -@@ -900,6 +900,8 @@ struct ata_port_operations { +@@ -901,6 +901,8 @@ struct ata_port_operations { void (*qc_prep)(struct ata_queued_cmd *qc); unsigned int (*qc_issue)(struct ata_queued_cmd *qc); bool (*qc_fill_rtf)(struct ata_queued_cmd *qc); @@ -45,7 +45,7 @@ /* * Configuration and exception handling -@@ -990,6 +992,9 @@ struct ata_port_operations { +@@ -991,6 +993,9 @@ struct ata_port_operations { void (*phy_reset)(struct ata_port *ap); void (*eng_timeout)(struct ata_port *ap); diff --git a/target/linux/ramips/patches-3.18/0026-MIPS-ralink-add-mt7628an-support.patch b/target/linux/ramips/patches-3.18/0026-MIPS-ralink-add-mt7628an-support.patch index c622a12ea7..c5c5d1a446 100644 --- a/target/linux/ramips/patches-3.18/0026-MIPS-ralink-add-mt7628an-support.patch +++ b/target/linux/ramips/patches-3.18/0026-MIPS-ralink-add-mt7628an-support.patch @@ -264,7 +264,7 @@ Signed-off-by: John Crispin /* * When the CPU goes into sleep mode, the BUS clock will be too low for * USB to function properly -@@ -367,6 +500,52 @@ void __init ralink_of_remap(void) +@@ -367,6 +502,52 @@ void __init ralink_of_remap(void) panic("Failed to remap core resources"); } @@ -317,7 +317,7 @@ Signed-off-by: John Crispin void prom_soc_init(struct ralink_soc_info *soc_info) { void __iomem *sysc = (void __iomem *) KSEG1ADDR(MT7620_SYSC_BASE); -@@ -384,18 +563,25 @@ void prom_soc_init(struct ralink_soc_inf +@@ -384,18 +565,25 @@ void prom_soc_init(struct ralink_soc_inf rev = __raw_readl(sysc + SYSC_REG_CHIP_REV); bga = (rev >> CHIP_REV_PKG_SHIFT) & CHIP_REV_PKG_MASK; @@ -353,7 +353,7 @@ Signed-off-by: John Crispin } snprintf(soc_info->sys_type, RAMIPS_SYS_TYPE_LEN, -@@ -407,28 +593,11 @@ void prom_soc_init(struct ralink_soc_inf +@@ -407,28 +595,11 @@ void prom_soc_init(struct ralink_soc_inf cfg0 = __raw_readl(sysc + SYSC_REG_SYSTEM_CONFIG0); dram_type = (cfg0 >> SYSCFG0_DRAM_TYPE_SHIFT) & SYSCFG0_DRAM_TYPE_MASK; @@ -386,7 +386,7 @@ Signed-off-by: John Crispin pmu0 = __raw_readl(sysc + PMU0_CFG); pmu1 = __raw_readl(sysc + PMU1_CFG); -@@ -437,4 +606,9 @@ void prom_soc_init(struct ralink_soc_inf +@@ -437,4 +608,9 @@ void prom_soc_init(struct ralink_soc_inf (pmu0 & PMU_SW_SET) ? ("sw") : ("hw")); pr_info("Digital PMU set to %s control\n", (pmu1 & DIG_SW_SEL) ? ("sw") : ("hw")); diff --git a/target/linux/ramips/patches-3.18/0052-i2c-MIPS-adds-ralink-I2C-driver.patch b/target/linux/ramips/patches-3.18/0052-i2c-MIPS-adds-ralink-I2C-driver.patch index 9c2538879c..8ed061070a 100644 --- a/target/linux/ramips/patches-3.18/0052-i2c-MIPS-adds-ralink-I2C-driver.patch +++ b/target/linux/ramips/patches-3.18/0052-i2c-MIPS-adds-ralink-I2C-driver.patch @@ -45,7 +45,7 @@ Signed-off-by: John Crispin +}; --- a/drivers/i2c/busses/Kconfig +++ b/drivers/i2c/busses/Kconfig -@@ -710,6 +710,10 @@ +@@ -710,6 +710,10 @@ config I2C_RK3X This driver can also be built as a module. If so, the module will be called i2c-rk3x. @@ -58,7 +58,7 @@ Signed-off-by: John Crispin help --- a/drivers/i2c/busses/Makefile +++ b/drivers/i2c/busses/Makefile -@@ -66,6 +66,7 @@ +@@ -66,6 +66,7 @@ obj-$(CONFIG_I2C_PNX) += i2c-pnx.o obj-$(CONFIG_I2C_PUV3) += i2c-puv3.o obj-$(CONFIG_I2C_PXA) += i2c-pxa.o obj-$(CONFIG_I2C_PXA_PCI) += i2c-pxa-pci.o diff --git a/target/linux/ramips/patches-3.18/0053-mmc-MIPS-ralink-add-sdhci-for-mt7620a-SoC.patch b/target/linux/ramips/patches-3.18/0053-mmc-MIPS-ralink-add-sdhci-for-mt7620a-SoC.patch index e8086b1358..686c643f40 100644 --- a/target/linux/ramips/patches-3.18/0053-mmc-MIPS-ralink-add-sdhci-for-mt7620a-SoC.patch +++ b/target/linux/ramips/patches-3.18/0053-mmc-MIPS-ralink-add-sdhci-for-mt7620a-SoC.patch @@ -25,7 +25,7 @@ Signed-off-by: John Crispin --- a/drivers/mmc/host/Kconfig +++ b/drivers/mmc/host/Kconfig -@@ -773,3 +773,5 @@ +@@ -773,3 +773,5 @@ config MMC_SUNXI help This selects support for the SD/MMC Host Controller on Allwinner sunxi SoCs. diff --git a/target/linux/ramips/patches-3.18/0060-soc_type.patch b/target/linux/ramips/patches-3.18/0060-soc_type.patch index 60d301405b..292a4ad456 100644 --- a/target/linux/ramips/patches-3.18/0060-soc_type.patch +++ b/target/linux/ramips/patches-3.18/0060-soc_type.patch @@ -110,8 +110,8 @@ if (xtal_rate == MHZ(40)) cpu_rate = MHZ(580); else -@@ -418,7 +416,7 @@ void __init ralink_clk_init(void) - ralink_clk_add("10000c00.uartlite", periph_rate); +@@ -420,7 +418,7 @@ void __init ralink_clk_init(void) + ralink_clk_add("10000e00.uart2", periph_rate); ralink_clk_add("10180000.wmac", xtal_rate); - if (IS_ENABLED(CONFIG_USB) && mt762x_soc != MT762X_SOC_MT7628AN) { @@ -119,7 +119,7 @@ /* * When the CPU goes into sleep mode, the BUS clock will be too low for * USB to function properly -@@ -506,11 +504,11 @@ void prom_soc_init(struct ralink_soc_inf +@@ -508,11 +506,11 @@ void prom_soc_init(struct ralink_soc_inf if (n0 == MT7620_CHIP_NAME0 && n1 == MT7620_CHIP_NAME1) { if (bga) { @@ -133,7 +133,7 @@ name = "MT7620N"; soc_info->compatible = "ralink,mt7620n-soc"; #ifdef CONFIG_PCI -@@ -518,7 +516,7 @@ void prom_soc_init(struct ralink_soc_inf +@@ -520,7 +518,7 @@ void prom_soc_init(struct ralink_soc_inf #endif } } else if (n0 == MT7620_CHIP_NAME0 && n1 == MT7628_CHIP_NAME1) { @@ -142,7 +142,7 @@ name = "MT7628AN"; soc_info->compatible = "ralink,mt7628an-soc"; } else { -@@ -535,7 +533,7 @@ void prom_soc_init(struct ralink_soc_inf +@@ -537,7 +535,7 @@ void prom_soc_init(struct ralink_soc_inf dram_type = (cfg0 >> SYSCFG0_DRAM_TYPE_SHIFT) & SYSCFG0_DRAM_TYPE_MASK; soc_info->mem_base = MT7620_DRAM_BASE; @@ -151,7 +151,7 @@ mt7628_dram_init(soc_info); else mt7620_dram_init(soc_info); -@@ -548,7 +546,7 @@ void prom_soc_init(struct ralink_soc_inf +@@ -550,7 +548,7 @@ void prom_soc_init(struct ralink_soc_inf pr_info("Digital PMU set to %s control\n", (pmu1 & DIG_SW_SEL) ? ("sw") : ("hw")); diff --git a/target/linux/ramips/patches-3.18/999-non-pci-mt7620.patch b/target/linux/ramips/patches-3.18/999-non-pci-mt7620.patch index 815b1c7447..ce56ae2002 100644 --- a/target/linux/ramips/patches-3.18/999-non-pci-mt7620.patch +++ b/target/linux/ramips/patches-3.18/999-non-pci-mt7620.patch @@ -1,6 +1,6 @@ --- a/arch/mips/ralink/mt7620.c +++ b/arch/mips/ralink/mt7620.c -@@ -511,9 +511,6 @@ void prom_soc_init(struct ralink_soc_inf +@@ -513,9 +513,6 @@ void prom_soc_init(struct ralink_soc_inf ralink_soc = MT762X_SOC_MT7620N; name = "MT7620N"; soc_info->compatible = "ralink,mt7620n-soc";