From: Daniel Golle Date: Sun, 11 Sep 2022 19:24:05 +0000 (+0100) Subject: mediatek: fix ledbar of UniFi 6 LR when running custom U-Boot X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=0b5cf952cf5b70d3af2424d05b15ce2730a3dc11;p=openwrt%2Fstaging%2Fjow.git mediatek: fix ledbar of UniFi 6 LR when running custom U-Boot The RGB LED of the UniFi 6 LR v1 doesn't work when using the Openwrt- built U-Boot. This is because the vendor loader resets the ledbar controller while our U-Boot doesn't care. Add reset-gpio so the ledbar driver in Linux will always reset the ledbar controller. Signed-off-by: Daniel Golle --- diff --git a/target/linux/mediatek/dts/mt7622-ubnt-unifi-6-lr-v1.dtsi b/target/linux/mediatek/dts/mt7622-ubnt-unifi-6-lr-v1.dtsi index 8f15d3f110..b3299a988f 100644 --- a/target/linux/mediatek/dts/mt7622-ubnt-unifi-6-lr-v1.dtsi +++ b/target/linux/mediatek/dts/mt7622-ubnt-unifi-6-lr-v1.dtsi @@ -9,7 +9,8 @@ compatible = "ubnt,ledbar"; reg = <0x30>; - enable-gpio = <&pio 59 0>; + enable-gpio = <&pio 59 GPIO_ACTIVE_LOW>; + reset-gpio = <&pio 60 GPIO_ACTIVE_LOW>; red { label = "red";