From: Andy Boyett <agb@openwrt.org>
Date: Thu, 26 Feb 2009 01:22:57 +0000 (+0000)
Subject: wnr2000: configure eth1 (WAN) and detect the ar8216 switch on eth0 (LAN)
X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=0b44a56a36b4178d7eaf123afa2830bc217cb738;p=openwrt%2Fstaging%2Fnbd.git

wnr2000: configure eth1 (WAN) and detect the ar8216 switch on eth0 (LAN)

ar8216 headers are embedded in packets on eth0 so it is not usable yet

SVN-Revision: 14661
---

diff --git a/target/linux/ar71xx/files/arch/mips/ar71xx/mach-wnr2000.c b/target/linux/ar71xx/files/arch/mips/ar71xx/mach-wnr2000.c
index 1b419c599a..be51727c9c 100644
--- a/target/linux/ar71xx/files/arch/mips/ar71xx/mach-wnr2000.c
+++ b/target/linux/ar71xx/files/arch/mips/ar71xx/mach-wnr2000.c
@@ -127,6 +127,19 @@ static struct gpio_button wnr2000_gpio_buttons[] __initdata = {
 
 static void __init wnr2000_setup(void)
 {
+	ar71xx_add_device_mdio(0x0);
+
+	ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
+	ar71xx_eth0_data.phy_mask = 0xf;
+	ar71xx_eth0_data.speed = SPEED_100;
+	ar71xx_eth0_data.duplex = DUPLEX_FULL;
+
+	ar71xx_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
+	ar71xx_eth1_data.phy_mask = 0x10;
+
+	ar71xx_add_device_eth(0);
+	ar71xx_add_device_eth(1);
+
 	ar71xx_add_device_spi(NULL, wnr2000_spi_info,
 					ARRAY_SIZE(wnr2000_spi_info));