From: H Hartley Sweeten Date: Wed, 13 Mar 2013 19:18:12 +0000 (-0700) Subject: staging: comedi: addi_apci_1710: only pci bar 2 is used X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=0b33e43ab39b0080fca9c2cfab58e60af0dd4971;p=openwrt%2Fstaging%2Fblogic.git staging: comedi: addi_apci_1710: only pci bar 2 is used This driver used to be tied to the addi-data common code which always saved the start address of pci bars 0, 1, 2, and 3 for use by the driver. This driver only uses pci bar 2. Remove all the non-used pci bars and move the saving of pci bar 2 so it occurs right after the pci device is enabled. Signed-off-by: H Hartley Sweeten Cc: Ian Abbott Cc: Greg Kroah-Hartman Signed-off-by: Greg Kroah-Hartman --- diff --git a/drivers/staging/comedi/drivers/addi_apci_1710.c b/drivers/staging/comedi/drivers/addi_apci_1710.c index f36ad00cee4a..3640c50f2cb0 100644 --- a/drivers/staging/comedi/drivers/addi_apci_1710.c +++ b/drivers/staging/comedi/drivers/addi_apci_1710.c @@ -45,16 +45,7 @@ static int apci1710_auto_attach(struct comedi_device *dev, ret = comedi_pci_enable(dev); if (ret) return ret; - - if (this_board->i_IorangeBase1) - dev->iobase = pci_resource_start(pcidev, 1); - else - dev->iobase = pci_resource_start(pcidev, 0); - - devpriv->iobase = dev->iobase; - devpriv->i_IobaseAmcc = pci_resource_start(pcidev, 0); - devpriv->i_IobaseAddon = pci_resource_start(pcidev, 2); - devpriv->i_IobaseReserved = pci_resource_start(pcidev, 3); + devpriv->s_BoardInfos.ui_Address = pci_resource_start(pcidev, 2); if (pcidev->irq > 0) { ret = request_irq(pcidev->irq, v_ADDI_Interrupt, IRQF_SHARED, @@ -65,8 +56,6 @@ static int apci1710_auto_attach(struct comedi_device *dev, i_ADDI_AttachPCI1710(dev); - devpriv->s_BoardInfos.ui_Address = pci_resource_start(pcidev, 2); - i_APCI1710_Reset(dev); return 0; }