From: Markus Stockhausen Date: Sun, 1 Sep 2024 18:36:38 +0000 (-0400) Subject: realtek: normalize dts directory X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=0b078f2ecfebf53631dd8e44a2458f71f4d5fcfb;p=openwrt%2Fstaging%2Fansuel.git realtek: normalize dts directory There is no need to keep a version specific dts directory. Rename the folder to its standard location. Signed-off-by: Markus Stockhausen --- diff --git a/target/linux/realtek/dts-5.15/rtl8380_d-link_dgs-1210-10mp-f.dts b/target/linux/realtek/dts-5.15/rtl8380_d-link_dgs-1210-10mp-f.dts deleted file mode 100644 index 664cab5999..0000000000 --- a/target/linux/realtek/dts-5.15/rtl8380_d-link_dgs-1210-10mp-f.dts +++ /dev/null @@ -1,140 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later OR MIT - -#include "rtl838x.dtsi" -#include "rtl83xx_d-link_dgs-1210_common.dtsi" -#include "rtl83xx_d-link_dgs-1210_gpio.dtsi" - -/ { - compatible = "d-link,dgs-1210-10mp-f", "realtek,rtl8382-soc", "realtek,rtl838x-soc"; - - model = "D-Link DGS-1210-10MP F"; - - /* i2c for sfp port9 */ - i2c0: i2c-gpio-0 { - compatible = "i2c-gpio"; - sda-gpios = <&gpio1 6 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; - scl-gpios = <&gpio1 7 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; - i2c-gpio,delay-us = <2>; - #address-cells = <1>; - #size-cells = <0>; - }; - - sfp0: sfp-p9 { - compatible = "sff,sfp"; - i2c-bus = <&i2c0>; - los-gpio = <&gpio1 9 GPIO_ACTIVE_HIGH>; - mod-def0-gpio = <&gpio1 8 GPIO_ACTIVE_LOW>; - tx-disable-gpio = <&gpio1 11 GPIO_ACTIVE_HIGH>; - }; - - /* i2c for sfp port10 */ - i2c1: i2c-gpio-1 { - compatible = "i2c-gpio"; - sda-gpios = <&gpio1 1 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; - scl-gpios = <&gpio1 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; - i2c-gpio,delay-us = <2>; - #address-cells = <1>; - #size-cells = <0>; - }; - - sfp1: sfp-p10 { - compatible = "sff,sfp"; - i2c-bus = <&i2c1>; - los-gpio = <&gpio1 4 GPIO_ACTIVE_HIGH>; - mod-def0-gpio = <&gpio1 3 GPIO_ACTIVE_LOW>; - tx-disable-gpio = <&gpio1 12 GPIO_ACTIVE_HIGH>; - }; -}; - -&leds { - link_act { - label = "green:link_act"; - gpios = <&gpio1 28 GPIO_ACTIVE_LOW>; - }; - - poe { - label = "green:poe"; - gpios = <&gpio1 29 GPIO_ACTIVE_LOW>; - }; - - poe_max { - label = "yellow:poe_max"; - gpios = <&gpio1 27 GPIO_ACTIVE_LOW>; - }; -}; - -&keys { - mode { - label = "mode"; - gpios = <&gpio1 30 GPIO_ACTIVE_LOW>; - linux,code = ; - }; -}; - -&uart1 { - status = "okay"; -}; - -ðernet0 { - mdio: mdio-bus { - compatible = "realtek,rtl838x-mdio"; - regmap = <ðernet0>; - #address-cells = <1>; - #size-cells = <0>; - - INTERNAL_PHY(8) - INTERNAL_PHY(9) - INTERNAL_PHY(10) - INTERNAL_PHY(11) - INTERNAL_PHY(12) - INTERNAL_PHY(13) - INTERNAL_PHY(14) - INTERNAL_PHY(15) - INTERNAL_PHY(24) - INTERNAL_PHY(26) - }; -}; - -&switch0 { - ports { - #address-cells = <1>; - #size-cells = <0>; - - SWITCH_PORT(8, 1, internal) - SWITCH_PORT(9, 2, internal) - SWITCH_PORT(10, 3, internal) - SWITCH_PORT(11, 4, internal) - SWITCH_PORT(12, 5, internal) - SWITCH_PORT(13, 6, internal) - SWITCH_PORT(14, 7, internal) - SWITCH_PORT(15, 8, internal) - - port@24 { - reg = <24>; - label = "lan9"; - phy-handle = <&phy24>; - phy-mode = "1000base-x"; - managed = "in-band-status"; - sfp = <&sfp0>; - }; - - port@26 { - reg = <26>; - label = "lan10"; - phy-handle = <&phy26>; - phy-mode = "1000base-x"; - managed = "in-band-status"; - sfp = <&sfp1>; - }; - - port@28 { - ethernet = <ðernet0>; - reg = <28>; - phy-mode = "internal"; - fixed-link { - speed = <1000>; - full-duplex; - }; - }; - }; -}; diff --git a/target/linux/realtek/dts-5.15/rtl8380_engenius_ews2910p.dts b/target/linux/realtek/dts-5.15/rtl8380_engenius_ews2910p.dts deleted file mode 100644 index 289ec86274..0000000000 --- a/target/linux/realtek/dts-5.15/rtl8380_engenius_ews2910p.dts +++ /dev/null @@ -1,232 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later - -#include "rtl838x.dtsi" - -#include -#include -#include - -/ { - compatible = "engenius,ews2910p", "realtek,rtl838x-soc"; - model = "EnGenius EWS2910P"; - - aliases { - led-boot = &led_power; - led-failsafe = &led_fault; - led-running = &led_power; - led-upgrade = &led_power; - }; - - memory@0 { - device_type = "memory"; - reg = <0x0 0x10000000>; - }; - - keys { - compatible = "gpio-keys"; - - reset { - label = "reset"; - gpios = <&gpio0 11 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - - led_mode { - label = "led-mode"; - gpios = <&gpio0 13 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - }; - - gpio1: rtl8231-gpio { - compatible = "realtek,rtl8231-gpio"; - #gpio-cells = <2>; - gpio-controller; - indirect-access-bus-id = <0>; - - poe_enable { - gpio-hog; - gpios = <1 GPIO_ACTIVE_HIGH>; - output-high; - line-name = "poe-enable"; - }; - - sff_p9_gpios { - gpio-hog; - gpios = < 6 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>, - < 11 GPIO_ACTIVE_HIGH>, /* los-gpio */ - < 12 GPIO_ACTIVE_LOW>; /* mod-def0-gpio */ - input; - line-name = "sff-p9-gpios"; - }; - }; - - gpio-export { - compatible = "gpio-export"; - - sff-p9-tx-disable { - gpio-export,name = "sff-p9-tx-disable"; - gpio-export,output = <1>; - gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>; - }; - }; - - gpio-restart { - compatible = "gpio-restart"; - gpios = <&gpio1 0 GPIO_ACTIVE_LOW>; - }; - - leds { - compatible = "gpio-leds"; - - led_power: led-0 { - function = LED_FUNCTION_POWER; - color = ; - gpios = <&gpio1 3 GPIO_ACTIVE_LOW>; - }; - - led_lan_mode: led-1 { - label = "green:lan-mode"; - gpios = <&gpio1 4 GPIO_ACTIVE_LOW>; - }; - - led_fault: led-2 { - function = LED_FUNCTION_FAULT; - color = ; - gpios = <&gpio1 2 GPIO_ACTIVE_LOW>; - }; - - led_poe_max: led-3 { - label = "amber:poe-max"; - gpios = <&gpio0 12 GPIO_ACTIVE_LOW>; - }; - }; - - i2c1: i2c-gpio-1 { - compatible = "i2c-gpio"; - sda-gpios = <&gpio1 7 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; - scl-gpios = <&gpio1 31 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; - i2c-gpio,delay-us = <2>; - #address-cells = <1>; - #size-cells = <0>; - }; - sfp1: sfp-p10 { - compatible = "sff,sfp"; - i2c-bus = <&i2c1>; - tx-disable-gpio = <&gpio1 13 GPIO_ACTIVE_HIGH>; - los-gpio = <&gpio1 14 GPIO_ACTIVE_HIGH>; - mod-def0-gpio = <&gpio1 21 GPIO_ACTIVE_LOW>; - }; -}; - -&spi0 { - status = "okay"; - - flash@0 { - compatible = "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <10000000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "u-boot"; - reg = <0x0 0x80000>; - read-only; - }; - partition@80000 { - label = "u-boot-env"; - reg = <0x80000 0x10000>; - read-only; - }; - partition@90000 { - label = "u-boot-env2"; - reg = <0x90000 0x10000>; - }; - partition@a0000 { - label = "rootfs_data"; - reg = <0xa0000 0xd60000>; - }; - partition@e00000 { - label = "jffs2-log"; - reg = <0xe00000 0x200000>; - }; - partition@1000000 { - compatible = "openwrt,uimage"; - label = "firmware"; - reg = <0x1000000 0x800000>; - openwrt,ih-magic = <0x03802910>; - }; - partition@1800000 { - label = "firmware2"; - reg = <0x1800000 0x800000>; - }; - }; - }; -}; - -ðernet0 { - mdio: mdio-bus { - compatible = "realtek,rtl838x-mdio"; - regmap = <ðernet0>; - #address-cells = <1>; - #size-cells = <0>; - - INTERNAL_PHY(8) - INTERNAL_PHY(9) - INTERNAL_PHY(10) - INTERNAL_PHY(11) - INTERNAL_PHY(12) - INTERNAL_PHY(13) - INTERNAL_PHY(14) - INTERNAL_PHY(15) - - INTERNAL_PHY(24) - INTERNAL_PHY(26) - }; -}; - -&switch0 { - ports { - #address-cells = <1>; - #size-cells = <0>; - - SWITCH_PORT(8, 1, internal) - SWITCH_PORT(9, 2, internal) - SWITCH_PORT(10, 3, internal) - SWITCH_PORT(11, 4, internal) - SWITCH_PORT(12, 5, internal) - SWITCH_PORT(13, 6, internal) - SWITCH_PORT(14, 7, internal) - SWITCH_PORT(15, 8, internal) - - SWITCH_SFP_PORT(24, 9, 1000base-x) - - port@26 { - reg = <26>; - label = "lan10"; - phy-mode = "1000base-x"; - phy-handle = <&phy26>; - managed = "in-band-status"; - sfp = <&sfp1>; - }; - - port@28 { - ethernet = <ðernet0>; - reg = <28>; - phy-mode = "internal"; - - fixed-link { - speed = <1000>; - full-duplex; - }; - }; - }; -}; - -&uart1 { - status = "okay"; -}; diff --git a/target/linux/realtek/dts-5.15/rtl8380_hpe_1920-8g-poe-180w.dts b/target/linux/realtek/dts-5.15/rtl8380_hpe_1920-8g-poe-180w.dts deleted file mode 100644 index 6398e6d034..0000000000 --- a/target/linux/realtek/dts-5.15/rtl8380_hpe_1920-8g-poe-180w.dts +++ /dev/null @@ -1,12 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later OR MIT - -#include "rtl8380_hpe_1920-8g.dtsi" - -/ { - compatible = "hpe,1920-8g-poe-180w", "realtek,rtl838x-soc"; - model = "HPE 1920-8G-PoE+ 180W (JG922A)"; -}; - -&uart1 { - status = "okay"; -}; diff --git a/target/linux/realtek/dts-5.15/rtl8380_hpe_1920-8g-poe-65w.dts b/target/linux/realtek/dts-5.15/rtl8380_hpe_1920-8g-poe-65w.dts deleted file mode 100644 index 341f535e93..0000000000 --- a/target/linux/realtek/dts-5.15/rtl8380_hpe_1920-8g-poe-65w.dts +++ /dev/null @@ -1,12 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later OR MIT - -#include "rtl8380_hpe_1920-8g.dtsi" - -/ { - compatible = "hpe,1920-8g-poe-65w", "realtek,rtl838x-soc"; - model = "HPE 1920-8G-PoE+ 65W (JG921A)"; -}; - -&uart1 { - status = "okay"; -}; diff --git a/target/linux/realtek/dts-5.15/rtl8380_hpe_1920-8g.dts b/target/linux/realtek/dts-5.15/rtl8380_hpe_1920-8g.dts deleted file mode 100644 index ac95a00c01..0000000000 --- a/target/linux/realtek/dts-5.15/rtl8380_hpe_1920-8g.dts +++ /dev/null @@ -1,8 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later OR MIT - -#include "rtl8380_hpe_1920-8g.dtsi" - -/ { - compatible = "hpe,1920-8g", "realtek,rtl838x-soc"; - model = "HPE 1920-8G (JG920A)"; -}; diff --git a/target/linux/realtek/dts-5.15/rtl8380_hpe_1920-8g.dtsi b/target/linux/realtek/dts-5.15/rtl8380_hpe_1920-8g.dtsi deleted file mode 100644 index 58f2c1f6c9..0000000000 --- a/target/linux/realtek/dts-5.15/rtl8380_hpe_1920-8g.dtsi +++ /dev/null @@ -1,112 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later OR MIT - -#include "rtl838x.dtsi" -#include "rtl838x_hpe_1920.dtsi" - -/ { - gpio1: rtl8231-gpio { - compatible = "realtek,rtl8231-gpio"; - #gpio-cells = <2>; - gpio-controller; - indirect-access-bus-id = <0>; - }; - - i2c0: i2c-gpio-0 { - compatible = "i2c-gpio"; - sda-gpios = <&gpio1 23 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; - scl-gpios = <&gpio1 24 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; - i2c-gpio,delay-us = <2>; - #address-cells = <1>; - #size-cells = <0>; - }; - - sfp0: sfp-0 { - compatible = "sff,sfp"; - i2c-bus = <&i2c0>; - los-gpio = <&gpio1 26 GPIO_ACTIVE_HIGH>; - mod-def0-gpio = <&gpio1 25 GPIO_ACTIVE_LOW>; - // tx-fault and tx-disable unconnected - }; - - i2c1: i2c-gpio-1 { - compatible = "i2c-gpio"; - sda-gpios = <&gpio1 13 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; - scl-gpios = <&gpio1 14 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; - i2c-gpio,delay-us = <2>; - #address-cells = <1>; - #size-cells = <0>; - }; - - sfp1: sfp-1 { - compatible = "sff,sfp"; - i2c-bus = <&i2c1>; - los-gpio = <&gpio1 22 GPIO_ACTIVE_HIGH>; - mod-def0-gpio = <&gpio1 21 GPIO_ACTIVE_LOW>; - // tx-fault and tx-disable unconnected - }; -}; - -ðernet0 { - mdio: mdio-bus { - compatible = "realtek,rtl838x-mdio"; - regmap = <ðernet0>; - #address-cells = <1>; - #size-cells = <0>; - - INTERNAL_PHY(8) - INTERNAL_PHY(9) - INTERNAL_PHY(10) - INTERNAL_PHY(11) - INTERNAL_PHY(12) - INTERNAL_PHY(13) - INTERNAL_PHY(14) - INTERNAL_PHY(15) - - INTERNAL_PHY(24) - INTERNAL_PHY(26) - }; -}; - -&switch0 { - ports { - #address-cells = <1>; - #size-cells = <0>; - - SWITCH_PORT(8, 1, internal) - SWITCH_PORT(9, 2, internal) - SWITCH_PORT(10, 3, internal) - SWITCH_PORT(11, 4, internal) - SWITCH_PORT(12, 5, internal) - SWITCH_PORT(13, 6, internal) - SWITCH_PORT(14, 7, internal) - SWITCH_PORT(15, 8, internal) - - port@24 { - reg = <24>; - label = "lan9"; - phy-handle = <&phy24>; - phy-mode = "1000base-x"; - managed = "in-band-status"; - sfp = <&sfp0>; - }; - - port@26 { - reg = <26>; - label = "lan10"; - phy-handle = <&phy26>; - phy-mode = "1000base-x"; - managed = "in-band-status"; - sfp = <&sfp1>; - }; - - port@28 { - ethernet = <ðernet0>; - reg = <28>; - phy-mode = "internal"; - fixed-link { - speed = <1000>; - full-duplex; - }; - }; - }; -}; diff --git a/target/linux/realtek/dts-5.15/rtl8380_netgear_gigabit.dtsi b/target/linux/realtek/dts-5.15/rtl8380_netgear_gigabit.dtsi deleted file mode 100644 index aca1a14774..0000000000 --- a/target/linux/realtek/dts-5.15/rtl8380_netgear_gigabit.dtsi +++ /dev/null @@ -1,141 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later - -#include "rtl838x.dtsi" - -#include -#include - -/ { - compatible = "realtek,rtl838x-soc"; - - memory@0 { - device_type = "memory"; - reg = <0x0 0x8000000>; - }; - - keys { - pinctrl-names = "default"; - pinctrl-0 = <&pinmux_disable_sys_led>; - - compatible = "gpio-keys"; - - mode { - label = "reset"; - gpios = <&gpio0 0 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - }; - - gpio-restart { - compatible = "gpio-restart"; - gpios = <&gpio0 13 GPIO_ACTIVE_LOW>; - open-source; - }; - - gpio1: rtl8231-gpio { - compatible = "realtek,rtl8231-gpio"; - #gpio-cells = <2>; - gpio-controller; - indirect-access-bus-id = <31>; - }; -}; - -ðernet0 { - mdio: mdio-bus { - compatible = "realtek,rtl838x-mdio"; - regmap = <ðernet0>; - #address-cells = <1>; - #size-cells = <0>; - - INTERNAL_PHY(8) - INTERNAL_PHY(9) - INTERNAL_PHY(10) - INTERNAL_PHY(11) - INTERNAL_PHY(12) - INTERNAL_PHY(13) - INTERNAL_PHY(14) - INTERNAL_PHY(15) - }; -}; - -&spi0 { - status = "okay"; - - flash@0 { - compatible = "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <50000000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "u-boot"; - reg = <0x0000000 0x00e0000>; - read-only; - }; - - partition@e0000 { - label = "u-boot-env"; - reg = <0x00e0000 0x0010000>; - }; - - partition@f0000 { - label = "u-boot-env2"; - reg = <0x00f0000 0x0010000>; - }; - - partition@100000 { - label = "jffs"; - reg = <0x0100000 0x0100000>; - read-only; - }; - - partition@200000 { - label = "jffs2"; - reg = <0x0200000 0x0100000>; - read-only; - }; - - firmware: partition@300000 { - label = "firmware"; - compatible = "openwrt,uimage", "denx,uimage"; - reg = <0x0300000 0x0e80000>; - }; - - partition@1180000 { - label = "runtime2"; - reg = <0x1180000 0x0e80000>; - read-only; - }; - }; - }; -}; - -&switch0 { - ports { - #address-cells = <1>; - #size-cells = <0>; - - SWITCH_PORT(8, 1, internal) - SWITCH_PORT(9, 2, internal) - SWITCH_PORT(10, 3, internal) - SWITCH_PORT(11, 4, internal) - SWITCH_PORT(12, 5, internal) - SWITCH_PORT(13, 6, internal) - SWITCH_PORT(14, 7, internal) - SWITCH_PORT(15, 8, internal) - - port@28 { - ethernet = <ðernet0>; - reg = <28>; - phy-mode = "internal"; - fixed-link { - speed = <1000>; - full-duplex; - }; - }; - }; -}; diff --git a/target/linux/realtek/dts-5.15/rtl8380_netgear_gs108t-v3.dts b/target/linux/realtek/dts-5.15/rtl8380_netgear_gs108t-v3.dts deleted file mode 100644 index b26ebb9806..0000000000 --- a/target/linux/realtek/dts-5.15/rtl8380_netgear_gs108t-v3.dts +++ /dev/null @@ -1,37 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later - -#include "rtl8380_netgear_gigabit.dtsi" - -#include - -/ { - compatible = "netgear,gs108t-v3", "realtek,rtl838x-soc"; - model = "Netgear GS108T v3"; - - aliases { - led-boot = &led_power_green; - led-failsafe = &led_power_amber; - led-running = &led_power_green; - led-upgrade = &led_power_amber; - }; - - leds { - compatible = "gpio-leds"; - - led_power_amber: led-0 { - color = ; - function = LED_FUNCTION_POWER; - gpios = <&gpio1 32 GPIO_ACTIVE_LOW>; - }; - - led_power_green: led-1 { - color = ; - function = LED_FUNCTION_POWER; - gpios = <&gpio1 31 GPIO_ACTIVE_LOW>; - }; - }; -}; - -&firmware { - openwrt,ih-magic = <0x4e474520>; -}; diff --git a/target/linux/realtek/dts-5.15/rtl8380_netgear_gs110tpp-v1.dts b/target/linux/realtek/dts-5.15/rtl8380_netgear_gs110tpp-v1.dts deleted file mode 100644 index f694ae3317..0000000000 --- a/target/linux/realtek/dts-5.15/rtl8380_netgear_gs110tpp-v1.dts +++ /dev/null @@ -1,58 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later - -#include "rtl8380_netgear_gigabit.dtsi" -#include - -/ { - compatible = "netgear,gs110tpp-v1", "realtek,rtl838x-soc"; - model = "Netgear GS110TPP v1"; - - aliases { - led-boot = &led_status_green; - led-failsafe = &led_status_red; - led-running = &led_status_green; - led-upgrade = &led_status_blue; - }; - - leds { - compatible = "gpio-leds"; - - led_status_red: led-0 { - color = ; - function = LED_FUNCTION_STATUS; - gpios = <&gpio1 31 GPIO_ACTIVE_LOW>; - }; - - led_status_green: led-1 { - color = ; - function = LED_FUNCTION_STATUS; - gpios = <&gpio1 32 GPIO_ACTIVE_LOW>; - }; - - led_status_blue: led-2 { - color = ; - function = LED_FUNCTION_STATUS; - gpios = <&gpio1 34 GPIO_ACTIVE_LOW>; - }; - }; -}; - -&firmware { - openwrt,ih-magic = <0x4e474520>; -}; - -&uart1 { - status = "okay"; -}; - -&mdio { - EXTERNAL_PHY(16) - EXTERNAL_PHY(17) -}; - -&switch0 { - ports { - SWITCH_PORT(16, 9, qsgmii) - SWITCH_PORT(17, 10, qsgmii) - }; -}; diff --git a/target/linux/realtek/dts-5.15/rtl8380_netgear_gs110tup-v1.dts b/target/linux/realtek/dts-5.15/rtl8380_netgear_gs110tup-v1.dts deleted file mode 100644 index 335aff2cf0..0000000000 --- a/target/linux/realtek/dts-5.15/rtl8380_netgear_gs110tup-v1.dts +++ /dev/null @@ -1,58 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later - -#include "rtl8380_netgear_gigabit.dtsi" -#include - -/ { - compatible = "netgear,gs110tup-v1", "realtek,rtl838x-soc"; - model = "Netgear GS110TUP v1"; - - aliases { - led-boot = &led_status_green; - led-failsafe = &led_status_red; - led-running = &led_status_green; - led-upgrade = &led_status_blue; - }; - - leds { - compatible = "gpio-leds"; - - led_status_red: led-0 { - color = ; - function = LED_FUNCTION_STATUS; - gpios = <&gpio1 31 GPIO_ACTIVE_LOW>; - }; - - led_status_green: led-1 { - color = ; - function = LED_FUNCTION_STATUS; - gpios = <&gpio1 32 GPIO_ACTIVE_LOW>; - }; - - led_status_blue: led-2 { - color = ; - function = LED_FUNCTION_STATUS; - gpios = <&gpio1 34 GPIO_ACTIVE_LOW>; - }; - }; -}; - -&firmware { - openwrt,ih-magic = <0x4e474720>; -}; - -&uart1 { - status = "okay"; -}; - -&mdio { - EXTERNAL_PHY(16) - EXTERNAL_PHY(24) -}; - -&switch0 { - ports { - SWITCH_PORT(16, 9, qsgmii) - SWITCH_SFP_PORT(24, 10, rgmii-id) - }; -}; diff --git a/target/linux/realtek/dts-5.15/rtl8380_netgear_gs308t-v1.dts b/target/linux/realtek/dts-5.15/rtl8380_netgear_gs308t-v1.dts deleted file mode 100644 index 5d77cf8c36..0000000000 --- a/target/linux/realtek/dts-5.15/rtl8380_netgear_gs308t-v1.dts +++ /dev/null @@ -1,37 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later - -#include "rtl8380_netgear_gigabit.dtsi" - -#include - -/ { - compatible = "netgear,gs308t-v1", "realtek,rtl838x-soc"; - model = "Netgear GS308T v1"; - - aliases { - led-boot = &led_power_green; - led-failsafe = &led_power_amber; - led-running = &led_power_green; - led-upgrade = &led_power_amber; - }; - - leds { - compatible = "gpio-leds"; - - led_power_amber: led-0 { - color = ; - function = LED_FUNCTION_POWER; - gpios = <&gpio1 32 GPIO_ACTIVE_LOW>; - }; - - led_power_green: led-1 { - color = ; - function = LED_FUNCTION_POWER; - gpios = <&gpio1 31 GPIO_ACTIVE_LOW>; - }; - }; -}; - -&firmware { - openwrt,ih-magic = <0x4e474335>; -}; diff --git a/target/linux/realtek/dts-5.15/rtl8380_netgear_gs310tp-v1.dts b/target/linux/realtek/dts-5.15/rtl8380_netgear_gs310tp-v1.dts deleted file mode 100644 index a6f7181c11..0000000000 --- a/target/linux/realtek/dts-5.15/rtl8380_netgear_gs310tp-v1.dts +++ /dev/null @@ -1,29 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later - -#include "rtl8380_netgear_gigabit.dtsi" - -/ { - compatible = "netgear,gs310tp-v1", "realtek,rtl838x-soc"; - model = "Netgear GS310TP v1"; - -}; - -&firmware { - openwrt,ih-magic = <0x4e474335>; -}; - -&uart1 { - status = "okay"; -}; - -&mdio { - INTERNAL_PHY(24) - INTERNAL_PHY(26) -}; - -&switch0 { - ports { - SWITCH_SFP_PORT(24, 9, rgmii-id) - SWITCH_SFP_PORT(26, 10, rgmii-id) - }; -}; diff --git a/target/linux/realtek/dts-5.15/rtl8380_panasonic_m8eg-pn28080k.dts b/target/linux/realtek/dts-5.15/rtl8380_panasonic_m8eg-pn28080k.dts deleted file mode 100644 index bd59ff36f4..0000000000 --- a/target/linux/realtek/dts-5.15/rtl8380_panasonic_m8eg-pn28080k.dts +++ /dev/null @@ -1,131 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later OR MIT - -#include "rtl838x.dtsi" -#include "rtl83xx_panasonic_mxxeg-pn28xx0k.dtsi" - -#include - -/ { - compatible = "panasonic,m8eg-pn28080k", "realtek,rtl8380-soc"; - model = "Panasonic Switch-M8eG PN28080K"; - - aliases { - led-boot = &led_status_eco_green; - led-failsafe = &led_status_eco_amber; - led-running = &led_status_eco_green; - led-upgrade = &led_status_eco_green; - }; - - sfp0: sfp-p9 { - compatible = "sff,sfp"; - i2c-bus = <&i2c0>; - tx-fault-gpio = <&gpio1 0 GPIO_ACTIVE_HIGH>; - tx-disable-gpio = <&gpio1 1 GPIO_ACTIVE_HIGH>; - mod-def0-gpio = <&gpio1 2 GPIO_ACTIVE_LOW>; - los-gpio = <&gpio1 3 GPIO_ACTIVE_HIGH>; - }; -}; - -&leds { - led_status_eco_amber: led-5 { - gpios = <&gpio2 1 GPIO_ACTIVE_LOW>; - color = ; - function = LED_FUNCTION_STATUS; - function-enumerator = <1>; - }; - - led_status_eco_green: led-6 { - gpios = <&gpio2 2 GPIO_ACTIVE_LOW>; - color = ; - function = LED_FUNCTION_STATUS; - function-enumerator = <2>; - }; -}; - -&i2c_gpio_0 { - scl-gpios = <&gpio0 0 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; - sda-gpios = <&gpio0 1 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; -}; - -&i2c_gpio_1 { - scl-gpios = <&gpio0 12 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; - sda-gpios = <&gpio0 13 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; -}; - -&gpio1 { - interrupt-controller; - #interrupt-cells = <2>; - interrupt-parent = <&gpio0>; - interrupts = <2 IRQ_TYPE_EDGE_FALLING>; -}; - -&gpio2 { - interrupt-controller; - #interrupt-cells = <2>; - interrupt-parent = <&gpio0>; - interrupts = <2 IRQ_TYPE_EDGE_FALLING>; -}; - -&i2c_switch { - i2c0: i2c@0 { - #address-cells = <1>; - #size-cells = <0>; - reg = <0>; - }; -}; - -ðernet0 { - mdio-bus { - compatible = "realtek,rtl838x-mdio"; - regmap = <ðernet0>; - #address-cells = <1>; - #size-cells = <0>; - - INTERNAL_PHY(8) - INTERNAL_PHY(9) - INTERNAL_PHY(10) - INTERNAL_PHY(11) - INTERNAL_PHY(12) - INTERNAL_PHY(13) - INTERNAL_PHY(14) - INTERNAL_PHY(15) - - INTERNAL_PHY(24) - }; -}; - -&switch0 { - ports { - #address-cells = <1>; - #size-cells = <0>; - - SWITCH_PORT(8, 1, internal) - SWITCH_PORT(9, 2, internal) - SWITCH_PORT(10, 3, internal) - SWITCH_PORT(11, 4, internal) - SWITCH_PORT(12, 5, internal) - SWITCH_PORT(13, 6, internal) - SWITCH_PORT(14, 7, internal) - SWITCH_PORT(15, 8, internal) - - port@24 { - reg = <24>; - label = "lan9"; - phy-mode = "1000base-x"; - phy-handle = <&phy24>; - managed = "in-band-status"; - sfp = <&sfp0>; - }; - - port@28 { - ethernet = <ðernet0>; - reg = <28>; - phy-mode = "internal"; - - fixed-link { - speed = <1000>; - full-duplex; - }; - }; - }; -}; diff --git a/target/linux/realtek/dts-5.15/rtl8380_tplink_sg2008p-v1.dts b/target/linux/realtek/dts-5.15/rtl8380_tplink_sg2008p-v1.dts deleted file mode 100644 index bf43e412b1..0000000000 --- a/target/linux/realtek/dts-5.15/rtl8380_tplink_sg2008p-v1.dts +++ /dev/null @@ -1,28 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later - -#include "rtl8380_tplink_sg2xxx.dtsi" - -/ { - compatible = "tplink,sg2008p-v1", "realtek,rtl838x-soc"; - model = "TP-Link SG2008P v1"; -}; - -&tps23861_20 { - status = "disabled"; -}; - -&phy24 { - status = "disabled"; -}; - -&phy26 { - status = "disabled"; -}; - -&port24 { - status = "disabled"; -}; - -&port26 { - status = "disabled"; -}; diff --git a/target/linux/realtek/dts-5.15/rtl8380_tplink_sg2210p-v3.dts b/target/linux/realtek/dts-5.15/rtl8380_tplink_sg2210p-v3.dts deleted file mode 100644 index 4b0022c388..0000000000 --- a/target/linux/realtek/dts-5.15/rtl8380_tplink_sg2210p-v3.dts +++ /dev/null @@ -1,16 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later - -#include "rtl8380_tplink_sg2xxx.dtsi" - -/ { - compatible = "tplink,sg2210p-v3", "realtek,rtl838x-soc"; - model = "TP-Link SG2210P v3"; -}; - -&port24 { - label = "lan-sfp2"; -}; - -&port26 { - label = "lan-sfp1"; -}; diff --git a/target/linux/realtek/dts-5.15/rtl8380_tplink_sg2xxx.dtsi b/target/linux/realtek/dts-5.15/rtl8380_tplink_sg2xxx.dtsi deleted file mode 100644 index d30d7b374e..0000000000 --- a/target/linux/realtek/dts-5.15/rtl8380_tplink_sg2xxx.dtsi +++ /dev/null @@ -1,188 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later - -#include "rtl838x.dtsi" - -#include -#include -#include - -/ { - aliases { - led-boot = &led_power; - led-failsafe = &led_power; - led-running = &led_power; - led-upgrade = &led_power; - label-mac-device = ðernet0; - }; - - memory@0 { - device_type = "memory"; - reg = <0x0 0x10000000>; - }; - - keys { - compatible = "gpio-keys"; - - reset { - label = "reset"; - gpios = <&gpio0 2 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - }; - - gpio-restart { - compatible = "gpio-restart"; - gpios = <&gpio0 3 GPIO_ACTIVE_LOW>; - }; - - leds { - compatible = "gpio-leds"; - - led_power: led-0 { - function = LED_FUNCTION_POWER; - color = ; - gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>; - }; - }; - - i2c1: i2c-gpio-1 { - compatible = "i2c-gpio"; - scl-gpios = <&gpio0 0 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; - sda-gpios = <&gpio0 1 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; - i2c-gpio,delay-us = <2>; - #address-cells = <1>; - #size-cells = <0>; - - tps23861_20: tps23861@20 { - compatible = "ti,tps23861"; - reg = <0x20>; - shunt-resistor-micro-ohms = <255000>; - }; - - tps23861_28: tps23861@28 { - compatible = "ti,tps23861"; - reg = <0x28>; - shunt-resistor-micro-ohms = <255000>; - }; - }; - - watchdog { - compatible = "linux,wdt-gpio"; - gpios = <&gpio0 11 GPIO_ACTIVE_HIGH>; - hw_algo = "toggle"; - /* SGM706 specs: typical 1.6s, but minimum 1.0s. */ - hw_margin_ms = <1000>; - }; -}; - -&gpio0 { - watchdog-enable { - gpio-hog; - gpios = <14 GPIO_ACTIVE_LOW>; - output-low; - line-name = "watchdog-enable"; - }; -}; - -&spi0 { - status = "okay"; - - flash@0 { - compatible = "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <10000000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "u-boot"; - reg = <0x0 0xe0000>; - read-only; - }; - partition@e0000 { - label = "u-boot-env"; - reg = <0xe0000 0x20000>; - }; - partition@100000 { - compatible = "denx,uimage"; - label = "firmware"; - reg = <0x100000 0x1a00000>; - }; - partition@1b00000 { - label = "usrappfs"; - reg = <0x1b00000 0x400000>; - }; - partition@1f00000 { - label = "para"; - reg = <0x1f00000 0x100000>; - read-only; - - nvmem-layout { - compatible = "fixed-layout"; - #address-cells = <1>; - #size-cells = <1>; - - factory_macaddr: macaddr@fdff4 { - reg = <0xfdff4 0x6>; - }; - }; - }; - }; - }; -}; - -ðernet0 { - nvmem-cells = <&factory_macaddr>; - nvmem-cell-names = "mac-address"; - - mdio: mdio-bus { - compatible = "realtek,rtl838x-mdio"; - #address-cells = <1>; - #size-cells = <0>; - - INTERNAL_PHY(8) - INTERNAL_PHY(9) - INTERNAL_PHY(10) - INTERNAL_PHY(11) - INTERNAL_PHY(12) - INTERNAL_PHY(13) - INTERNAL_PHY(14) - INTERNAL_PHY(15) - - INTERNAL_PHY(24) - INTERNAL_PHY(26) - }; -}; - -&switch0 { - ports { - #address-cells = <1>; - #size-cells = <0>; - - SWITCH_PORT(15, 1, internal) - SWITCH_PORT(14, 2, internal) - SWITCH_PORT(13, 3, internal) - SWITCH_PORT(12, 4, internal) - SWITCH_PORT(11, 5, internal) - SWITCH_PORT(10, 6, internal) - SWITCH_PORT(9, 7, internal) - SWITCH_PORT(8, 8, internal) - - SWITCH_SFP_PORT(24, 9, 1000base-x) - SWITCH_SFP_PORT(26, 10, 1000base-x) - - port@28 { - ethernet = <ðernet0>; - reg = <28>; - phy-mode = "internal"; - - fixed-link { - speed = <1000>; - full-duplex; - }; - }; - }; -}; diff --git a/target/linux/realtek/dts-5.15/rtl8380_zyxel_gs1900-10hp.dts b/target/linux/realtek/dts-5.15/rtl8380_zyxel_gs1900-10hp.dts deleted file mode 100644 index 190a77b7ff..0000000000 --- a/target/linux/realtek/dts-5.15/rtl8380_zyxel_gs1900-10hp.dts +++ /dev/null @@ -1,75 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later - -#include "rtl8380_zyxel_gs1900.dtsi" - -/ { - compatible = "zyxel,gs1900-10hp", "realtek,rtl838x-soc"; - model = "Zyxel GS1900-10HP Switch"; - - /* i2c of the left SFP cage: port 9 */ - i2c0: i2c-gpio-0 { - compatible = "i2c-gpio"; - sda-gpios = <&gpio1 24 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; - scl-gpios = <&gpio1 25 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; - i2c-gpio,delay-us = <2>; - #address-cells = <1>; - #size-cells = <0>; - }; - - sfp0: sfp-p9 { - compatible = "sff,sfp"; - i2c-bus = <&i2c0>; - los-gpio = <&gpio1 27 GPIO_ACTIVE_HIGH>; - tx-fault-gpio = <&gpio1 22 GPIO_ACTIVE_HIGH>; - mod-def0-gpio = <&gpio1 26 GPIO_ACTIVE_LOW>; - tx-disable-gpio = <&gpio1 23 GPIO_ACTIVE_HIGH>; - }; - - /* i2c of the right SFP cage: port 10 */ - i2c1: i2c-gpio-1 { - compatible = "i2c-gpio"; - sda-gpios = <&gpio1 30 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; - scl-gpios = <&gpio1 31 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; - i2c-gpio,delay-us = <2>; - #address-cells = <1>; - #size-cells = <0>; - }; - - sfp1: sfp-p10 { - compatible = "sff,sfp"; - i2c-bus = <&i2c1>; - los-gpio = <&gpio1 33 GPIO_ACTIVE_HIGH>; - tx-fault-gpio = <&gpio1 28 GPIO_ACTIVE_HIGH>; - mod-def0-gpio = <&gpio1 32 GPIO_ACTIVE_LOW>; - tx-disable-gpio = <&gpio1 29 GPIO_ACTIVE_HIGH>; - }; -}; - -&uart1 { - status = "okay"; -}; - -&mdio { - INTERNAL_PHY(24) - INTERNAL_PHY(26) -}; - -&switch0 { - ports { - port@24 { - reg = <24>; - label = "lan9"; - phy-mode = "1000base-x"; - managed = "in-band-status"; - sfp = <&sfp0>; - }; - - port@26 { - reg = <26>; - label = "lan10"; - phy-mode = "1000base-x"; - managed = "in-band-status"; - sfp = <&sfp1>; - }; - }; -}; diff --git a/target/linux/realtek/dts-5.15/rtl8380_zyxel_gs1900-8.dts b/target/linux/realtek/dts-5.15/rtl8380_zyxel_gs1900-8.dts deleted file mode 100644 index 548e83ba73..0000000000 --- a/target/linux/realtek/dts-5.15/rtl8380_zyxel_gs1900-8.dts +++ /dev/null @@ -1,12 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later - -#include "rtl8380_zyxel_gs1900.dtsi" - -/ { - compatible = "zyxel,gs1900-8", "realtek,rtl838x-soc"; - model = "Zyxel GS1900-8v1/v2 Switch"; -}; - -&gpio1 { - /delete-node/ poe_enable; -}; diff --git a/target/linux/realtek/dts-5.15/rtl8380_zyxel_gs1900-8hp-v1.dts b/target/linux/realtek/dts-5.15/rtl8380_zyxel_gs1900-8hp-v1.dts deleted file mode 100644 index 386edfb015..0000000000 --- a/target/linux/realtek/dts-5.15/rtl8380_zyxel_gs1900-8hp-v1.dts +++ /dev/null @@ -1,12 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later - -#include "rtl8380_zyxel_gs1900.dtsi" - -/ { - compatible = "zyxel,gs1900-8hp-v1", "realtek,rtl838x-soc"; - model = "Zyxel GS1900-8HP v1 Switch"; -}; - -&uart1 { - status = "okay"; -}; diff --git a/target/linux/realtek/dts-5.15/rtl8380_zyxel_gs1900-8hp-v2.dts b/target/linux/realtek/dts-5.15/rtl8380_zyxel_gs1900-8hp-v2.dts deleted file mode 100644 index 2702f2ba1c..0000000000 --- a/target/linux/realtek/dts-5.15/rtl8380_zyxel_gs1900-8hp-v2.dts +++ /dev/null @@ -1,12 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later - -#include "rtl8380_zyxel_gs1900.dtsi" - -/ { - compatible = "zyxel,gs1900-8hp-v2", "realtek,rtl838x-soc"; - model = "Zyxel GS1900-8HP v2 Switch"; -}; - -&uart1 { - status = "okay"; -}; diff --git a/target/linux/realtek/dts-5.15/rtl8380_zyxel_gs1900.dtsi b/target/linux/realtek/dts-5.15/rtl8380_zyxel_gs1900.dtsi deleted file mode 100644 index 5993c1b798..0000000000 --- a/target/linux/realtek/dts-5.15/rtl8380_zyxel_gs1900.dtsi +++ /dev/null @@ -1,149 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later - -#include "rtl838x.dtsi" - -#include -#include - -/ { - aliases { - led-boot = &led_sys; - led-failsafe = &led_sys; - led-running = &led_sys; - led-upgrade = &led_sys; - }; - - memory@0 { - device_type = "memory"; - reg = <0x0 0x8000000>; - }; - - keys { - compatible = "gpio-keys-polled"; - poll-interval = <20>; - - reset { - label = "reset"; - gpios = <&gpio1 3 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - }; - - leds { - pinctrl-names = "default"; - pinctrl-0 = <&pinmux_disable_sys_led>; - compatible = "gpio-leds"; - - led_sys: sys { - label = "green:sys"; - gpios = <&gpio0 0 GPIO_ACTIVE_HIGH>; - }; - }; - - gpio1: rtl8231-gpio { - compatible = "realtek,rtl8231-gpio"; - #gpio-cells = <2>; - gpio-controller; - indirect-access-bus-id = <0>; - - poe_enable { - gpio-hog; - gpios = <13 GPIO_ACTIVE_HIGH>; - output-high; - }; - }; -}; - -&spi0 { - status = "okay"; - - flash@0 { - compatible = "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <10000000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "u-boot"; - reg = <0x0 0x40000>; - read-only; - }; - partition@40000 { - label = "u-boot-env"; - reg = <0x40000 0x10000>; - read-only; - }; - partition@50000 { - label = "u-boot-env2"; - reg = <0x50000 0x10000>; - }; - partition@60000 { - label = "jffs"; - reg = <0x60000 0x100000>; - }; - partition@160000 { - label = "jffs2"; - reg = <0x160000 0x100000>; - }; - partition@b260000 { - label = "firmware"; - reg = <0x260000 0x6d0000>; - compatible = "openwrt,uimage", "denx,uimage"; - openwrt,ih-magic = <0x83800000>; - }; - partition@930000 { - label = "runtime2"; - reg = <0x930000 0x6d0000>; - }; - }; - }; -}; - -ðernet0 { - mdio: mdio-bus { - compatible = "realtek,rtl838x-mdio"; - regmap = <ðernet0>; - #address-cells = <1>; - #size-cells = <0>; - - INTERNAL_PHY(8) - INTERNAL_PHY(9) - INTERNAL_PHY(10) - INTERNAL_PHY(11) - INTERNAL_PHY(12) - INTERNAL_PHY(13) - INTERNAL_PHY(14) - INTERNAL_PHY(15) - }; -}; - -&switch0 { - ports { - #address-cells = <1>; - #size-cells = <0>; - - SWITCH_PORT(8, 1, internal) - SWITCH_PORT(9, 2, internal) - SWITCH_PORT(10, 3, internal) - SWITCH_PORT(11, 4, internal) - SWITCH_PORT(12, 5, internal) - SWITCH_PORT(13, 6, internal) - SWITCH_PORT(14, 7, internal) - SWITCH_PORT(15, 8, internal) - - port@28 { - ethernet = <ðernet0>; - reg = <28>; - phy-mode = "internal"; - - fixed-link { - speed = <1000>; - full-duplex; - }; - }; - }; -}; diff --git a/target/linux/realtek/dts-5.15/rtl8382_allnet_all-sg8208m.dts b/target/linux/realtek/dts-5.15/rtl8382_allnet_all-sg8208m.dts deleted file mode 100644 index 320cb08ac7..0000000000 --- a/target/linux/realtek/dts-5.15/rtl8382_allnet_all-sg8208m.dts +++ /dev/null @@ -1,141 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later - -#include "rtl838x.dtsi" - -#include -#include - -/ { - compatible = "allnet,all-sg8208m", "realtek,rtl838x-soc"; - model = "ALLNET ALL-SG8208M"; - - aliases { - led-boot = &led_sys; - led-failsafe = &led_sys; - led-running = &led_sys; - led-upgrade = &led_sys; - }; - - memory@0 { - device_type = "memory"; - reg = <0x0 0x8000000>; - }; - - keys { - compatible = "gpio-keys-polled"; - poll-interval = <20>; - - /* is this pin 3 on the external RTL8231 (&gpio1)? */ - /*reset { - label = "reset"; - gpios = <&gpio0 67 GPIO_ACTIVE_LOW>; - linux,code = ; - };*/ - }; - - leds { - pinctrl-names = "default"; - pinctrl-0 = <&pinmux_disable_sys_led>; - compatible = "gpio-leds"; - - led_sys: sys { - label = "green:sys"; - gpios = <&gpio0 0 GPIO_ACTIVE_HIGH>; - }; - // GPIO 25: power on/off all port leds - }; -}; - -&spi0 { - status = "okay"; - - flash@0 { - compatible = "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <10000000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "u-boot"; - reg = <0x0 0x80000>; - read-only; - }; - - partition@80000 { - label = "u-boot-env"; - reg = <0x80000 0x10000>; - read-only; - }; - - partition@90000 { - label = "u-boot-env2"; - reg = <0x90000 0x10000>; - }; - - partition@a0000 { - label = "jffs"; - reg = <0xa0000 0x100000>; - }; - - partition@1a0000 { - label = "jffs2"; - reg = <0x1a0000 0x100000>; - }; - - partition@2a0000 { - label = "firmware"; - reg = <0x2a0000 0xd60000>; - compatible = "openwrt,uimage", "denx,uimage"; - openwrt,ih-magic = <0x00000006>; - }; - }; - }; -}; - -ðernet0 { - mdio: mdio-bus { - compatible = "realtek,rtl838x-mdio"; - regmap = <ðernet0>; - #address-cells = <1>; - #size-cells = <0>; - - INTERNAL_PHY(8) - INTERNAL_PHY(9) - INTERNAL_PHY(10) - INTERNAL_PHY(11) - INTERNAL_PHY(12) - INTERNAL_PHY(13) - INTERNAL_PHY(14) - INTERNAL_PHY(15) - }; -}; - -&switch0 { - ports { - #address-cells = <1>; - #size-cells = <0>; - - SWITCH_PORT(8, 1, internal) - SWITCH_PORT(9, 2, internal) - SWITCH_PORT(10, 3, internal) - SWITCH_PORT(11, 4, internal) - SWITCH_PORT(12, 5, internal) - SWITCH_PORT(13, 6, internal) - SWITCH_PORT(14, 7, internal) - SWITCH_PORT(15, 8, internal) - - port@28 { - ethernet = <ðernet0>; - reg = <28>; - phy-mode = "internal"; - fixed-link { - speed = <1000>; - full-duplex; - }; - }; - }; -}; diff --git a/target/linux/realtek/dts-5.15/rtl8382_apresia_aplgs120gtss.dts b/target/linux/realtek/dts-5.15/rtl8382_apresia_aplgs120gtss.dts deleted file mode 100644 index de17958af1..0000000000 --- a/target/linux/realtek/dts-5.15/rtl8382_apresia_aplgs120gtss.dts +++ /dev/null @@ -1,267 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later OR MIT - -#include "rtl838x.dtsi" - -#include -#include -#include - -/ { - compatible = "apresia,aplgs120gtss", "realtek,rtl8382-soc"; - model = "APRESIA ApresiaLightGS120GT-SS"; - - aliases { - led-boot = &led_power; - led-failsafe = &led_power; - led-running = &led_power; - led-upgrade = &led_power; - }; - - memory@0 { - device_type = "memory"; - reg = <0x0 0x10000000>; - }; - - leds { - compatible = "gpio-leds"; - - led_power: led-0 { - gpios = <&gpio0 0 GPIO_ACTIVE_LOW>; - color = ; - function = LED_FUNCTION_POWER; - }; - - led-1 { - gpios = <&gpio1 10 GPIO_ACTIVE_LOW>; - color = ; - function = LED_FUNCTION_FAULT; - }; - - /* LED chip is soldered, but no hole on the case */ - led-2 { - gpios = <&gpio1 36 GPIO_ACTIVE_LOW>; - color = ; - }; - }; - - keys { - compatible = "gpio-keys-polled"; - poll-interval = <20>; - - reset { - label = "reset"; - gpios = <&gpio1 33 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - }; - - gpio-restart { - compatible = "gpio-restart"; - gpios = <&gpio1 34 GPIO_ACTIVE_LOW>; - open-source; - }; - - gpio1: rtl8231-gpio { - compatible = "realtek,rtl8231-gpio"; - #gpio-cells = <2>; - gpio-controller; - indirect-access-bus-id = <0>; - }; - - i2c0: i2c-gpio-0 { - compatible = "i2c-gpio"; - sda-gpios = <&gpio1 1 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; - scl-gpios = <&gpio1 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; - i2c-gpio,delay-us = <2>; - #address-cells = <1>; - #size-cells = <0>; - }; - - i2c1: i2c-gpio-1 { - compatible = "i2c-gpio"; - sda-gpios = <&gpio1 6 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; - scl-gpios = <&gpio1 7 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; - i2c-gpio,delay-us = <2>; - #address-cells = <1>; - #size-cells = <0>; - }; - - i2c2: i2c-gpio-2 { - compatible = "i2c-gpio"; - sda-gpios = <&gpio1 11 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; - scl-gpios = <&gpio1 12 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; - i2c-gpio,delay-us = <2>; - #address-cells = <1>; - #size-cells = <0>; - }; - - i2c3: i2c-gpio-3 { - compatible = "i2c-gpio"; - sda-gpios = <&gpio1 22 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; - scl-gpios = <&gpio1 23 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; - i2c-gpio,delay-us = <2>; - #address-cells = <1>; - #size-cells = <0>; - }; - - /* 4x TX-Disable lines are provided by RTL8214FC */ - sfp0: sfp-p17 { - compatible = "sff,sfp"; - i2c-bus = <&i2c1>; - los-gpio = <&gpio1 9 GPIO_ACTIVE_HIGH>; - mod-def0-gpio = <&gpio1 8 GPIO_ACTIVE_LOW>; - }; - - sfp1: sfp-p18 { - compatible = "sff,sfp"; - i2c-bus = <&i2c0>; - los-gpio = <&gpio1 4 GPIO_ACTIVE_HIGH>; - mod-def0-gpio = <&gpio1 3 GPIO_ACTIVE_LOW>; - }; - - sfp2: sfp-p19 { - compatible = "sff,sfp"; - i2c-bus = <&i2c3>; - los-gpio = <&gpio1 25 GPIO_ACTIVE_HIGH>; - mod-def0-gpio = <&gpio1 24 GPIO_ACTIVE_LOW>; - }; - - sfp3: sfp-p20 { - compatible = "sff,sfp"; - i2c-bus = <&i2c2>; - los-gpio = <&gpio1 14 GPIO_ACTIVE_HIGH>; - mod-def0-gpio = <&gpio1 13 GPIO_ACTIVE_LOW>; - }; -}; - -&gpio0 { - rtl8231_reset { - gpio-hog; - gpios = <1 GPIO_ACTIVE_HIGH>; - output-high; - line-name = "rtl8231-reset"; - }; -}; - -&spi0 { - status = "okay"; - - flash@0 { - compatible = "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <10000000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "u-boot"; - reg = <0x0 0x80000>; - read-only; - }; - - partition@80000 { - label = "u-boot-env"; - reg = <0x80000 0x40000>; - }; - - partition@c0000 { - label = "u-boot-env2"; - reg = <0xc0000 0x40000>; - }; - - partition@100000 { - compatible = "openwrt,uimage", "denx,uimage"; - label = "firmware"; - reg = <0x100000 0xe80000>; - openwrt,ih-magic = <0x12345000>; - }; - - partition@f80000 { - label = "firmware2"; - reg = <0xf80000 0xe80000>; - }; - - partition@1e00000 { - label = "jffs2"; - reg = <0x1e00000 0x200000>; - read-only; - }; - }; - }; -}; - -ðernet0 { - mdio-bus { - compatible = "realtek,rtl838x-mdio"; - regmap = <ðernet0>; - #address-cells = <1>; - #size-cells = <0>; - - EXTERNAL_PHY(0) - EXTERNAL_PHY(1) - EXTERNAL_PHY(2) - EXTERNAL_PHY(3) - EXTERNAL_PHY(4) - EXTERNAL_PHY(5) - EXTERNAL_PHY(6) - EXTERNAL_PHY(7) - - INTERNAL_PHY(8) - INTERNAL_PHY(9) - INTERNAL_PHY(10) - INTERNAL_PHY(11) - INTERNAL_PHY(12) - INTERNAL_PHY(13) - INTERNAL_PHY(14) - INTERNAL_PHY(15) - - EXTERNAL_SFP_PHY_FULL(24, 0) - EXTERNAL_SFP_PHY_FULL(25, 1) - EXTERNAL_SFP_PHY_FULL(26, 2) - EXTERNAL_SFP_PHY_FULL(27, 3) - }; -}; - -&switch0 { - ports { - #address-cells = <1>; - #size-cells = <0>; - - SWITCH_PORT(0, 1, qsgmii) - SWITCH_PORT(1, 2, qsgmii) - SWITCH_PORT(2, 3, qsgmii) - SWITCH_PORT(3, 4, qsgmii) - SWITCH_PORT(4, 5, qsgmii) - SWITCH_PORT(5, 6, qsgmii) - SWITCH_PORT(6, 7, qsgmii) - SWITCH_PORT(7, 8, qsgmii) - - SWITCH_PORT(8, 9, internal) - SWITCH_PORT(9, 10, internal) - SWITCH_PORT(10, 11, internal) - SWITCH_PORT(11, 12, internal) - SWITCH_PORT(12, 13, internal) - SWITCH_PORT(13, 14, internal) - SWITCH_PORT(14, 15, internal) - SWITCH_PORT(15, 16, internal) - - SWITCH_PORT(24, 17, qsgmii) - SWITCH_PORT(25, 18, qsgmii) - SWITCH_PORT(26, 19, qsgmii) - SWITCH_PORT(27, 20, qsgmii) - - port@28 { - ethernet = <ðernet0>; - reg = <28>; - phy-mode = "internal"; - - fixed-link { - speed = <1000>; - full-duplex; - }; - }; - }; -}; diff --git a/target/linux/realtek/dts-5.15/rtl8382_d-link_dgs-1210-10p.dts b/target/linux/realtek/dts-5.15/rtl8382_d-link_dgs-1210-10p.dts deleted file mode 100644 index 1aef88afd4..0000000000 --- a/target/linux/realtek/dts-5.15/rtl8382_d-link_dgs-1210-10p.dts +++ /dev/null @@ -1,154 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later OR MIT - -#include "rtl838x.dtsi" -#include "rtl83xx_d-link_dgs-1210_common.dtsi" - -/ { - compatible = "d-link,dgs-1210-10p", "realtek,rtl838x-soc"; - model = "D-Link DGS-1210-10P"; - - /* i2c of the left SFP cage: port 9 */ - i2c0: i2c-gpio-0 { - compatible = "i2c-gpio"; - sda-gpios = <&gpio1 6 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; - scl-gpios = <&gpio1 7 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; - i2c-gpio,delay-us = <2>; - #address-cells = <1>; - #size-cells = <0>; - }; - - sfp0: sfp-p9 { - compatible = "sff,sfp"; - i2c-bus = <&i2c0>; - los-gpio = <&gpio1 9 GPIO_ACTIVE_HIGH>; - mod-def0-gpio = <&gpio1 8 GPIO_ACTIVE_LOW>; - tx-disable-gpio = <&gpio1 11 GPIO_ACTIVE_HIGH>; - }; - - /* i2c of the right SFP cage: port 10 */ - i2c1: i2c-gpio-1 { - compatible = "i2c-gpio"; - sda-gpios = <&gpio1 1 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; - scl-gpios = <&gpio1 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; - i2c-gpio,delay-us = <2>; - #address-cells = <1>; - #size-cells = <0>; - }; - - sfp1: sfp-p10 { - compatible = "sff,sfp"; - i2c-bus = <&i2c1>; - los-gpio = <&gpio1 4 GPIO_ACTIVE_HIGH>; - mod-def0-gpio = <&gpio1 3 GPIO_ACTIVE_LOW>; - tx-disable-gpio = <&gpio1 12 GPIO_ACTIVE_HIGH>; - }; - - keys { - compatible = "gpio-keys-polled"; - poll-interval = <20>; - - mode { - label = "mode"; - gpios = <&gpio1 30 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - - reset { - label = "reset"; - gpios = <&gpio1 33 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - }; - - leds { - link_act { - label = "green:link_act"; - gpios = <&gpio1 28 GPIO_ACTIVE_LOW>; - }; - - poe { - label = "green:poe"; - gpios = <&gpio1 29 GPIO_ACTIVE_LOW>; - }; - - poe_max { - label = "yellow:poe_max"; - gpios = <&gpio1 27 GPIO_ACTIVE_LOW>; - }; - }; - - gpio1: rtl8231-gpio { - compatible = "realtek,rtl8231-gpio"; - #gpio-cells = <2>; - gpio-controller; - indirect-access-bus-id = <0>; - }; -}; - -&uart1 { - status = "okay"; -}; - -ðernet0 { - mdio: mdio-bus { - compatible = "realtek,rtl838x-mdio"; - regmap = <ðernet0>; - #address-cells = <1>; - #size-cells = <0>; - - INTERNAL_PHY(8) - INTERNAL_PHY(9) - INTERNAL_PHY(10) - INTERNAL_PHY(11) - INTERNAL_PHY(12) - INTERNAL_PHY(13) - INTERNAL_PHY(14) - INTERNAL_PHY(15) - INTERNAL_PHY(24) - INTERNAL_PHY(26) - }; -}; - -&switch0 { - ports { - #address-cells = <1>; - #size-cells = <0>; - - SWITCH_PORT(8, 1, internal) - SWITCH_PORT(9, 2, internal) - SWITCH_PORT(10, 3, internal) - SWITCH_PORT(11, 4, internal) - SWITCH_PORT(12, 5, internal) - SWITCH_PORT(13, 6, internal) - SWITCH_PORT(14, 7, internal) - SWITCH_PORT(15, 8, internal) - - port@24 { - reg = <24>; - label = "lan9"; - phy-handle = <&phy24>; - phy-mode = "1000base-x"; - managed = "in-band-status"; - sfp = <&sfp0>; - }; - - port@26 { - reg = <26>; - label = "lan10"; - phy-handle = <&phy26>; - phy-mode = "1000base-x"; - managed = "in-band-status"; - sfp = <&sfp1>; - }; - - port@28 { - ethernet = <ðernet0>; - reg = <28>; - phy-mode = "internal"; - fixed-link { - speed = <1000>; - full-duplex; - }; - }; - }; -}; diff --git a/target/linux/realtek/dts-5.15/rtl8382_d-link_dgs-1210-16.dts b/target/linux/realtek/dts-5.15/rtl8382_d-link_dgs-1210-16.dts deleted file mode 100644 index c9a79fb607..0000000000 --- a/target/linux/realtek/dts-5.15/rtl8382_d-link_dgs-1210-16.dts +++ /dev/null @@ -1,82 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later OR MIT - -#include "rtl838x.dtsi" -#include "rtl83xx_d-link_dgs-1210_common.dtsi" -#include "rtl83xx_d-link_dgs-1210_gpio.dtsi" - -/ { - compatible = "d-link,dgs-1210-16", "realtek,rtl838x-soc"; - model = "D-Link DGS-1210-16"; -}; - -ðernet0 { - mdio: mdio-bus { - compatible = "realtek,rtl838x-mdio"; - regmap = <ðernet0>; - #address-cells = <1>; - #size-cells = <0>; - - EXTERNAL_PHY(0) - EXTERNAL_PHY(1) - EXTERNAL_PHY(2) - EXTERNAL_PHY(3) - EXTERNAL_PHY(4) - EXTERNAL_PHY(5) - EXTERNAL_PHY(6) - EXTERNAL_PHY(7) - - INTERNAL_PHY(8) - INTERNAL_PHY(9) - INTERNAL_PHY(10) - INTERNAL_PHY(11) - INTERNAL_PHY(12) - INTERNAL_PHY(13) - INTERNAL_PHY(14) - INTERNAL_PHY(15) - - EXTERNAL_SFP_PHY(24) - EXTERNAL_SFP_PHY(25) - EXTERNAL_SFP_PHY(26) - EXTERNAL_SFP_PHY(27) - }; -}; - -&switch0 { - ports { - #address-cells = <1>; - #size-cells = <0>; - - SWITCH_PORT(0, 1, qsgmii) - SWITCH_PORT(1, 2, qsgmii) - SWITCH_PORT(2, 3, qsgmii) - SWITCH_PORT(3, 4, qsgmii) - SWITCH_PORT(4, 5, qsgmii) - SWITCH_PORT(5, 6, qsgmii) - SWITCH_PORT(6, 7, qsgmii) - SWITCH_PORT(7, 8, qsgmii) - - SWITCH_PORT(8, 9, internal) - SWITCH_PORT(9, 10, internal) - SWITCH_PORT(10, 11, internal) - SWITCH_PORT(11, 12, internal) - SWITCH_PORT(12, 13, internal) - SWITCH_PORT(13, 14, internal) - SWITCH_PORT(14, 15, internal) - SWITCH_PORT(15, 16, internal) - - SWITCH_PORT(24, 17, qsgmii) - SWITCH_PORT(25, 18, qsgmii) - SWITCH_PORT(26, 19, qsgmii) - SWITCH_PORT(27, 20, qsgmii) - - port@28 { - ethernet = <ðernet0>; - reg = <28>; - phy-mode = "internal"; - fixed-link { - speed = <1000>; - full-duplex; - }; - }; - }; -}; diff --git a/target/linux/realtek/dts-5.15/rtl8382_d-link_dgs-1210-20.dts b/target/linux/realtek/dts-5.15/rtl8382_d-link_dgs-1210-20.dts deleted file mode 100644 index dacc50676d..0000000000 --- a/target/linux/realtek/dts-5.15/rtl8382_d-link_dgs-1210-20.dts +++ /dev/null @@ -1,82 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later OR MIT - -#include "rtl838x.dtsi" -#include "rtl83xx_d-link_dgs-1210_common.dtsi" -#include "rtl83xx_d-link_dgs-1210_gpio.dtsi" - -/ { - compatible = "d-link,dgs-1210-20", "realtek,rtl838x-soc"; - model = "D-Link DGS-1210-20"; -}; - -ðernet0 { - mdio: mdio-bus { - compatible = "realtek,rtl838x-mdio"; - regmap = <ðernet0>; - #address-cells = <1>; - #size-cells = <0>; - - EXTERNAL_PHY(0) - EXTERNAL_PHY(1) - EXTERNAL_PHY(2) - EXTERNAL_PHY(3) - EXTERNAL_PHY(4) - EXTERNAL_PHY(5) - EXTERNAL_PHY(6) - EXTERNAL_PHY(7) - - INTERNAL_PHY(8) - INTERNAL_PHY(9) - INTERNAL_PHY(10) - INTERNAL_PHY(11) - INTERNAL_PHY(12) - INTERNAL_PHY(13) - INTERNAL_PHY(14) - INTERNAL_PHY(15) - - EXTERNAL_SFP_PHY(24) - EXTERNAL_SFP_PHY(25) - EXTERNAL_SFP_PHY(26) - EXTERNAL_SFP_PHY(27) - }; -}; - -&switch0 { - ports { - #address-cells = <1>; - #size-cells = <0>; - - SWITCH_PORT(0, 1, qsgmii) - SWITCH_PORT(1, 2, qsgmii) - SWITCH_PORT(2, 3, qsgmii) - SWITCH_PORT(3, 4, qsgmii) - SWITCH_PORT(4, 5, qsgmii) - SWITCH_PORT(5, 6, qsgmii) - SWITCH_PORT(6, 7, qsgmii) - SWITCH_PORT(7, 8, qsgmii) - - SWITCH_PORT(8, 9, internal) - SWITCH_PORT(9, 10, internal) - SWITCH_PORT(10, 11, internal) - SWITCH_PORT(11, 12, internal) - SWITCH_PORT(12, 13, internal) - SWITCH_PORT(13, 14, internal) - SWITCH_PORT(14, 15, internal) - SWITCH_PORT(15, 16, internal) - - SWITCH_PORT(24, 17, qsgmii) - SWITCH_PORT(25, 18, qsgmii) - SWITCH_PORT(26, 19, qsgmii) - SWITCH_PORT(27, 20, qsgmii) - - port@28 { - ethernet = <ðernet0>; - reg = <28>; - phy-mode = "internal"; - fixed-link { - speed = <1000>; - full-duplex; - }; - }; - }; -}; diff --git a/target/linux/realtek/dts-5.15/rtl8382_d-link_dgs-1210-28.dts b/target/linux/realtek/dts-5.15/rtl8382_d-link_dgs-1210-28.dts deleted file mode 100644 index 0bcb196b7c..0000000000 --- a/target/linux/realtek/dts-5.15/rtl8382_d-link_dgs-1210-28.dts +++ /dev/null @@ -1,11 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later OR MIT - -#include "rtl838x.dtsi" -#include "rtl83xx_d-link_dgs-1210_common.dtsi" -#include "rtl83xx_d-link_dgs-1210_gpio.dtsi" -#include "rtl8382_d-link_dgs-1210-28_common.dtsi" - -/ { - compatible = "d-link,dgs-1210-28", "realtek,rtl838x-soc"; - model = "D-Link DGS-1210-28"; -}; diff --git a/target/linux/realtek/dts-5.15/rtl8382_d-link_dgs-1210-28_common.dtsi b/target/linux/realtek/dts-5.15/rtl8382_d-link_dgs-1210-28_common.dtsi deleted file mode 100644 index 17866d5f03..0000000000 --- a/target/linux/realtek/dts-5.15/rtl8382_d-link_dgs-1210-28_common.dtsi +++ /dev/null @@ -1,91 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later OR MIT - -ðernet0 { - mdio: mdio-bus { - compatible = "realtek,rtl838x-mdio"; - regmap = <ðernet0>; - #address-cells = <1>; - #size-cells = <0>; - - EXTERNAL_PHY(0) - EXTERNAL_PHY(1) - EXTERNAL_PHY(2) - EXTERNAL_PHY(3) - EXTERNAL_PHY(4) - EXTERNAL_PHY(5) - EXTERNAL_PHY(6) - EXTERNAL_PHY(7) - - INTERNAL_PHY(8) - INTERNAL_PHY(9) - INTERNAL_PHY(10) - INTERNAL_PHY(11) - INTERNAL_PHY(12) - INTERNAL_PHY(13) - INTERNAL_PHY(14) - INTERNAL_PHY(15) - - EXTERNAL_PHY(16) - EXTERNAL_PHY(17) - EXTERNAL_PHY(18) - EXTERNAL_PHY(19) - EXTERNAL_PHY(20) - EXTERNAL_PHY(21) - EXTERNAL_PHY(22) - EXTERNAL_PHY(23) - - EXTERNAL_SFP_PHY(24) - EXTERNAL_SFP_PHY(25) - EXTERNAL_SFP_PHY(26) - EXTERNAL_SFP_PHY(27) - }; -}; - -&switch0 { - ports { - #address-cells = <1>; - #size-cells = <0>; - - SWITCH_PORT(0, 1, qsgmii) - SWITCH_PORT(1, 2, qsgmii) - SWITCH_PORT(2, 3, qsgmii) - SWITCH_PORT(3, 4, qsgmii) - SWITCH_PORT(4, 5, qsgmii) - SWITCH_PORT(5, 6, qsgmii) - SWITCH_PORT(6, 7, qsgmii) - SWITCH_PORT(7, 8, qsgmii) - - SWITCH_PORT(8, 9, internal) - SWITCH_PORT(9, 10, internal) - SWITCH_PORT(10, 11, internal) - SWITCH_PORT(11, 12, internal) - SWITCH_PORT(12, 13, internal) - SWITCH_PORT(13, 14, internal) - SWITCH_PORT(14, 15, internal) - SWITCH_PORT(15, 16, internal) - - SWITCH_PORT(16, 17, qsgmii) - SWITCH_PORT(17, 18, qsgmii) - SWITCH_PORT(18, 19, qsgmii) - SWITCH_PORT(19, 20, qsgmii) - SWITCH_PORT(20, 21, qsgmii) - SWITCH_PORT(21, 22, qsgmii) - SWITCH_PORT(22, 23, qsgmii) - SWITCH_PORT(23, 24, qsgmii) - - SWITCH_PORT(24, 25, qsgmii) - SWITCH_PORT(25, 26, qsgmii) - SWITCH_PORT(26, 27, qsgmii) - SWITCH_PORT(27, 28, qsgmii) - - port@28 { - ethernet = <ðernet0>; - reg = <28>; - phy-mode = "internal"; - fixed-link { - speed = <1000>; - full-duplex; - }; - }; - }; -}; diff --git a/target/linux/realtek/dts-5.15/rtl8382_d-link_dgs-1210-28mp-f.dts b/target/linux/realtek/dts-5.15/rtl8382_d-link_dgs-1210-28mp-f.dts deleted file mode 100644 index ce008229b3..0000000000 --- a/target/linux/realtek/dts-5.15/rtl8382_d-link_dgs-1210-28mp-f.dts +++ /dev/null @@ -1,40 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later OR MIT - -#include "rtl838x.dtsi" -#include "rtl83xx_d-link_dgs-1210_common.dtsi" -#include "rtl83xx_d-link_dgs-1210_gpio.dtsi" -#include "rtl8382_d-link_dgs-1210-28_common.dtsi" - -/ { - compatible = "d-link,dgs-1210-28mp-f", "realtek,rtl8382-soc", "realtek,rtl838x-soc"; - model = "D-Link DGS-1210-28MP F"; -}; - -&leds { - link_act { - label = "green:link_act"; - gpios = <&gpio1 28 GPIO_ACTIVE_LOW>; - }; - - poe { - label = "green:poe"; - gpios = <&gpio1 29 GPIO_ACTIVE_LOW>; - }; - - poe_max { - label = "yellow:poe_max"; - gpios = <&gpio1 27 GPIO_ACTIVE_LOW>; - }; -}; - -&keys { - mode { - label = "mode"; - gpios = <&gpio1 30 GPIO_ACTIVE_LOW>; - linux,code = ; - }; -}; - -&uart1 { - status = "okay"; -}; diff --git a/target/linux/realtek/dts-5.15/rtl8382_hpe_1920-16g.dts b/target/linux/realtek/dts-5.15/rtl8382_hpe_1920-16g.dts deleted file mode 100644 index 59043b2f6f..0000000000 --- a/target/linux/realtek/dts-5.15/rtl8382_hpe_1920-16g.dts +++ /dev/null @@ -1,48 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later OR MIT - -#include "rtl8382_hpe_1920.dtsi" - -/ { - compatible = "hpe,1920-16g", "realtek,rtl838x-soc"; - model = "HPE 1920-16G (JG923A)"; -}; - -&switch0 { - ports { - #address-cells = <1>; - #size-cells = <0>; - - SWITCH_PORT(8, 1, internal) - SWITCH_PORT(9, 2, internal) - SWITCH_PORT(10, 3, internal) - SWITCH_PORT(11, 4, internal) - SWITCH_PORT(12, 5, internal) - SWITCH_PORT(13, 6, internal) - SWITCH_PORT(14, 7, internal) - SWITCH_PORT(15, 8, internal) - - SWITCH_PORT(16, 9, qsgmii) - SWITCH_PORT(17, 10, qsgmii) - SWITCH_PORT(18, 11, qsgmii) - SWITCH_PORT(19, 12, qsgmii) - SWITCH_PORT(20, 13, qsgmii) - SWITCH_PORT(21, 14, qsgmii) - SWITCH_PORT(22, 15, qsgmii) - SWITCH_PORT(23, 16, qsgmii) - - SWITCH_PORT(24, 17, qsgmii) - SWITCH_PORT(25, 18, qsgmii) - SWITCH_PORT(26, 19, qsgmii) - SWITCH_PORT(27, 20, qsgmii) - - port@28 { - ethernet = <ðernet0>; - reg = <28>; - phy-mode = "internal"; - fixed-link { - speed = <1000>; - full-duplex; - }; - }; - }; -}; diff --git a/target/linux/realtek/dts-5.15/rtl8382_hpe_1920-24g.dts b/target/linux/realtek/dts-5.15/rtl8382_hpe_1920-24g.dts deleted file mode 100644 index 61781c708e..0000000000 --- a/target/linux/realtek/dts-5.15/rtl8382_hpe_1920-24g.dts +++ /dev/null @@ -1,68 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later OR MIT - -#include "rtl8382_hpe_1920.dtsi" - -/ { - compatible = "hpe,1920-24g", "realtek,rtl838x-soc"; - model = "HPE 1920-24G (JG924A)"; -}; - -&mdio { - EXTERNAL_PHY(0) - EXTERNAL_PHY(1) - EXTERNAL_PHY(2) - EXTERNAL_PHY(3) - EXTERNAL_PHY(4) - EXTERNAL_PHY(5) - EXTERNAL_PHY(6) - EXTERNAL_PHY(7) -}; - -&switch0 { - ports { - #address-cells = <1>; - #size-cells = <0>; - - SWITCH_PORT(0, 1, qsgmii) - SWITCH_PORT(1, 2, qsgmii) - SWITCH_PORT(2, 3, qsgmii) - SWITCH_PORT(3, 4, qsgmii) - SWITCH_PORT(4, 5, qsgmii) - SWITCH_PORT(5, 6, qsgmii) - SWITCH_PORT(6, 7, qsgmii) - SWITCH_PORT(7, 8, qsgmii) - - SWITCH_PORT(8, 9, internal) - SWITCH_PORT(9, 10, internal) - SWITCH_PORT(10, 11, internal) - SWITCH_PORT(11, 12, internal) - SWITCH_PORT(12, 13, internal) - SWITCH_PORT(13, 14, internal) - SWITCH_PORT(14, 15, internal) - SWITCH_PORT(15, 16, internal) - - SWITCH_PORT(16, 17, qsgmii) - SWITCH_PORT(17, 18, qsgmii) - SWITCH_PORT(18, 19, qsgmii) - SWITCH_PORT(19, 20, qsgmii) - SWITCH_PORT(20, 21, qsgmii) - SWITCH_PORT(21, 22, qsgmii) - SWITCH_PORT(22, 23, qsgmii) - SWITCH_PORT(23, 24, qsgmii) - - SWITCH_PORT(24, 25, qsgmii) - SWITCH_PORT(25, 26, qsgmii) - SWITCH_PORT(26, 27, qsgmii) - SWITCH_PORT(27, 28, qsgmii) - - port@28 { - ethernet = <ðernet0>; - reg = <28>; - phy-mode = "internal"; - fixed-link { - speed = <1000>; - full-duplex; - }; - }; - }; -}; diff --git a/target/linux/realtek/dts-5.15/rtl8382_hpe_1920.dtsi b/target/linux/realtek/dts-5.15/rtl8382_hpe_1920.dtsi deleted file mode 100644 index 5368b41c27..0000000000 --- a/target/linux/realtek/dts-5.15/rtl8382_hpe_1920.dtsi +++ /dev/null @@ -1,117 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later OR MIT - -#include "rtl838x.dtsi" -#include "rtl838x_hpe_1920.dtsi" - -/ { - gpio1: rtl8231-gpio { - compatible = "realtek,rtl8231-gpio"; - #gpio-cells = <2>; - gpio-controller; - indirect-access-bus-id = <0>; - }; - - i2c0: i2c-gpio-0 { - compatible = "i2c-gpio"; - sda-gpios = <&gpio1 13 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; - scl-gpios = <&gpio1 14 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; - i2c-gpio,delay-us = <2>; - #address-cells = <1>; - #size-cells = <0>; - }; - - sfp0: sfp-0 { - compatible = "sff,sfp"; - i2c-bus = <&i2c0>; - los-gpio = <&gpio1 22 GPIO_ACTIVE_HIGH>; - mod-def0-gpio = <&gpio1 21 GPIO_ACTIVE_LOW>; - // tx-fault unconnected - // tx-disable connected to RTL8214FC - }; - - i2c1: i2c-gpio-1 { - compatible = "i2c-gpio"; - sda-gpios = <&gpio1 23 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; - scl-gpios = <&gpio1 24 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; - i2c-gpio,delay-us = <2>; - #address-cells = <1>; - #size-cells = <0>; - }; - - sfp1: sfp-1 { - compatible = "sff,sfp"; - i2c-bus = <&i2c1>; - los-gpio = <&gpio1 26 GPIO_ACTIVE_HIGH>; - mod-def0-gpio = <&gpio1 25 GPIO_ACTIVE_LOW>; - // tx-fault unconnected - // tx-disable connected to RTL8214FC - }; - - i2c2: i2c-gpio-2 { - compatible = "i2c-gpio"; - sda-gpios = <&gpio1 27 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; - scl-gpios = <&gpio1 28 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; - i2c-gpio,delay-us = <2>; - #address-cells = <1>; - #size-cells = <0>; - }; - - sfp2: sfp-2 { - compatible = "sff,sfp"; - i2c-bus = <&i2c2>; - los-gpio = <&gpio1 30 GPIO_ACTIVE_HIGH>; - mod-def0-gpio = <&gpio1 29 GPIO_ACTIVE_LOW>; - // tx-fault unconnected - // tx-disable connected to RTL8214FC - }; - - i2c3: i2c-gpio-3 { - compatible = "i2c-gpio"; - sda-gpios = <&gpio1 31 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; - scl-gpios = <&gpio1 32 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; - i2c-gpio,delay-us = <2>; - #address-cells = <1>; - #size-cells = <0>; - }; - - sfp3: sfp-3 { - compatible = "sff,sfp"; - i2c-bus = <&i2c3>; - los-gpio = <&gpio1 34 GPIO_ACTIVE_HIGH>; - mod-def0-gpio = <&gpio1 33 GPIO_ACTIVE_LOW>; - // tx-fault unconnected - // tx-disable connected to RTL8214FC - }; -}; - -ðernet0 { - mdio: mdio-bus { - compatible = "realtek,rtl838x-mdio"; - regmap = <ðernet0>; - #address-cells = <1>; - #size-cells = <0>; - - INTERNAL_PHY(8) - INTERNAL_PHY(9) - INTERNAL_PHY(10) - INTERNAL_PHY(11) - INTERNAL_PHY(12) - INTERNAL_PHY(13) - INTERNAL_PHY(14) - INTERNAL_PHY(15) - - EXTERNAL_PHY(16) - EXTERNAL_PHY(17) - EXTERNAL_PHY(18) - EXTERNAL_PHY(19) - EXTERNAL_PHY(20) - EXTERNAL_PHY(21) - EXTERNAL_PHY(22) - EXTERNAL_PHY(23) - - EXTERNAL_SFP_PHY_FULL(24, 0) - EXTERNAL_SFP_PHY_FULL(25, 1) - EXTERNAL_SFP_PHY_FULL(26, 2) - EXTERNAL_SFP_PHY_FULL(27, 3) - }; -}; diff --git a/target/linux/realtek/dts-5.15/rtl8382_inaba_aml2-17gp.dts b/target/linux/realtek/dts-5.15/rtl8382_inaba_aml2-17gp.dts deleted file mode 100644 index 4808141494..0000000000 --- a/target/linux/realtek/dts-5.15/rtl8382_inaba_aml2-17gp.dts +++ /dev/null @@ -1,158 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later OR MIT - -#include "rtl838x.dtsi" - -#include -#include - -/ { - compatible = "inaba,aml2-17gp", "realtek,rtl838x-soc"; - model = "INABA Abaniact AML2-17GP"; - - memory@0 { - device_type = "memory"; - reg = <0x0 0x8000000>; - }; - - keys { - pinctrl-names = "default"; - pinctrl-0 = <&pinmux_disable_sys_led>; - - compatible = "gpio-keys"; - - reset { - label = "reset"; - gpios = <&gpio0 0 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - }; -}; - -&spi0 { - status = "okay"; - - flash@0 { - compatible = "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <10000000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "u-boot"; - reg = <0x0 0x80000>; - read-only; - }; - - partition@80000 { - label = "u-boot-env"; - reg = <0x80000 0x10000>; - read-only; - }; - - partition@90000 { - label = "u-boot-env2"; - reg = <0x90000 0x10000>; - }; - - partition@a0000 { - label = "jffs2_cfg"; - reg = <0xa0000 0x400000>; - read-only; - }; - - partition@4a0000 { - label = "jffs2_log"; - reg = <0x4a0000 0x100000>; - read-only; - }; - - partition@5a0000 { - compatible = "openwrt,uimage", "denx,uimage"; - label = "firmware"; - reg = <0x5a0000 0xd30000>; - openwrt,ih-magic = <0x83800000>; - }; - - partition@12d0000 { - label = "runtime2"; - reg = <0x12d0000 0xd30000>; - }; - }; - }; -}; - -ðernet0 { - mdio-bus { - compatible = "realtek,rtl838x-mdio"; - regmap = <ðernet0>; - #address-cells = <1>; - #size-cells = <0>; - - INTERNAL_PHY(8) - INTERNAL_PHY(9) - INTERNAL_PHY(10) - INTERNAL_PHY(11) - INTERNAL_PHY(12) - INTERNAL_PHY(13) - INTERNAL_PHY(14) - INTERNAL_PHY(15) - - EXTERNAL_PHY(16) - EXTERNAL_PHY(17) - EXTERNAL_PHY(18) - EXTERNAL_PHY(19) - EXTERNAL_PHY(20) - EXTERNAL_PHY(21) - EXTERNAL_PHY(22) - EXTERNAL_PHY(23) - - EXTERNAL_PHY(24) - }; -}; - -&switch0 { - ports { - #address-cells = <1>; - #size-cells = <0>; - - SWITCH_PORT(8, 1, internal) - SWITCH_PORT(9, 2, internal) - SWITCH_PORT(10, 3, internal) - SWITCH_PORT(11, 4, internal) - SWITCH_PORT(12, 5, internal) - SWITCH_PORT(13, 6, internal) - SWITCH_PORT(14, 7, internal) - SWITCH_PORT(15, 8, internal) - - SWITCH_PORT(16, 9, qsgmii) - SWITCH_PORT(17, 10, qsgmii) - SWITCH_PORT(18, 11, qsgmii) - SWITCH_PORT(19, 12, qsgmii) - SWITCH_PORT(20, 13, qsgmii) - SWITCH_PORT(21, 14, qsgmii) - SWITCH_PORT(22, 15, qsgmii) - SWITCH_PORT(23, 16, qsgmii) - - port@24 { - reg = <24>; - label = "wan"; - phy-handle = <&phy24>; - phy-mode = "qsgmii"; - }; - - port@28 { - ethernet = <ðernet0>; - reg = <28>; - phy-mode = "internal"; - - fixed-link { - speed = <1000>; - full-duplex; - }; - }; - }; -}; diff --git a/target/linux/realtek/dts-5.15/rtl8382_iodata_bsh-g24mb.dts b/target/linux/realtek/dts-5.15/rtl8382_iodata_bsh-g24mb.dts deleted file mode 100644 index 49b55813f9..0000000000 --- a/target/linux/realtek/dts-5.15/rtl8382_iodata_bsh-g24mb.dts +++ /dev/null @@ -1,192 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later OR MIT - -#include "rtl838x.dtsi" - -#include -#include -#include - -/ { - compatible = "iodata,bsh-g24mb", "realtek,rtl838x-soc"; - model = "I-O DATA BSH-G24MB"; - - aliases { - led-boot = &led_sys_loop; - led-failsafe = &led_sys_loop; - led-upgrade = &led_sys_loop; - }; - - memory@0 { - device_type = "memory"; - reg = <0x0 0x8000000>; - }; - - leds { - pinctrl-names = "default"; - pinctrl-0 = <&pinmux_disable_sys_led>; - compatible = "gpio-leds"; - - led_sys_loop: led { - gpios = <&gpio0 0 GPIO_ACTIVE_HIGH>; - color = ; - function = LED_FUNCTION_STATUS; - }; - }; - - keys { - compatible = "gpio-keys-polled"; - poll-interval = <20>; - - reset { - label = "reset"; - gpios = <&gpio1 3 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - }; - - gpio1: rtl8231-gpio { - compatible = "realtek,rtl8231-gpio"; - #gpio-cells = <2>; - gpio-controller; - indirect-access-bus-id = <0>; - }; -}; - -&spi0 { - status = "okay"; - - flash@0 { - compatible = "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <10000000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "u-boot"; - reg = <0x0 0x80000>; - read-only; - }; - - partition@80000 { - label = "u-boot-env"; - reg = <0x80000 0x10000>; - read-only; - }; - - partition@90000 { - label = "u-boot-env2"; - reg = <0x90000 0x10000>; - }; - - partition@a0000 { - label = "jffs2_cfg"; - reg = <0xa0000 0x100000>; - read-only; - }; - - partition@1a0000 { - label = "jffs2_log"; - reg = <0x1a0000 0x100000>; - read-only; - }; - - /* - * use 2x OS partitions in OpenWrt - * - * 0x2A0000-0x94FFFF: RUNTIME - * 0x950000-0xFFFFFF: RUNTIME2 (not used in stock) - */ - partition@2a0000 { - compatible = "openwrt,uimage", "denx,uimage"; - label = "firmware"; - reg = <0x2a0000 0xd60000>; - openwrt,ih-magic = <0x83800013>; - }; - }; - }; -}; - -ðernet0 { - mdio-bus { - compatible = "realtek,rtl838x-mdio"; - regmap = <ðernet0>; - #address-cells = <1>; - #size-cells = <0>; - - EXTERNAL_PHY(0) - EXTERNAL_PHY(1) - EXTERNAL_PHY(2) - EXTERNAL_PHY(3) - EXTERNAL_PHY(4) - EXTERNAL_PHY(5) - EXTERNAL_PHY(6) - EXTERNAL_PHY(7) - - INTERNAL_PHY(8) - INTERNAL_PHY(9) - INTERNAL_PHY(10) - INTERNAL_PHY(11) - INTERNAL_PHY(12) - INTERNAL_PHY(13) - INTERNAL_PHY(14) - INTERNAL_PHY(15) - - EXTERNAL_PHY(16) - EXTERNAL_PHY(17) - EXTERNAL_PHY(18) - EXTERNAL_PHY(19) - EXTERNAL_PHY(20) - EXTERNAL_PHY(21) - EXTERNAL_PHY(22) - EXTERNAL_PHY(23) - }; -}; - -&switch0 { - ports { - #address-cells = <1>; - #size-cells = <0>; - - SWITCH_PORT(0, 1, qsgmii) - SWITCH_PORT(1, 2, qsgmii) - SWITCH_PORT(2, 3, qsgmii) - SWITCH_PORT(3, 4, qsgmii) - SWITCH_PORT(4, 5, qsgmii) - SWITCH_PORT(5, 6, qsgmii) - SWITCH_PORT(6, 7, qsgmii) - SWITCH_PORT(7, 8, qsgmii) - - SWITCH_PORT(8, 9, internal) - SWITCH_PORT(9, 10, internal) - SWITCH_PORT(10, 11, internal) - SWITCH_PORT(11, 12, internal) - SWITCH_PORT(12, 13, internal) - SWITCH_PORT(13, 14, internal) - SWITCH_PORT(14, 15, internal) - SWITCH_PORT(15, 16, internal) - - SWITCH_PORT(16, 17, qsgmii) - SWITCH_PORT(17, 18, qsgmii) - SWITCH_PORT(18, 19, qsgmii) - SWITCH_PORT(19, 20, qsgmii) - SWITCH_PORT(20, 21, qsgmii) - SWITCH_PORT(21, 22, qsgmii) - SWITCH_PORT(22, 23, qsgmii) - SWITCH_PORT(23, 24, qsgmii) - - port@28 { - ethernet = <ðernet0>; - reg = <28>; - phy-mode = "internal"; - - fixed-link { - speed = <1000>; - full-duplex; - }; - }; - }; -}; diff --git a/target/linux/realtek/dts-5.15/rtl8382_panasonic_m16eg-pn28160k.dts b/target/linux/realtek/dts-5.15/rtl8382_panasonic_m16eg-pn28160k.dts deleted file mode 100644 index abbfd60085..0000000000 --- a/target/linux/realtek/dts-5.15/rtl8382_panasonic_m16eg-pn28160k.dts +++ /dev/null @@ -1,169 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later OR MIT - -#include "rtl838x.dtsi" -#include "rtl83xx_panasonic_mxxeg-pn28xx0k.dtsi" - -#include - -/ { - compatible = "panasonic,m16eg-pn28160k", "realtek,rtl8382-soc"; - model = "Panasonic Switch-M16eG PN28160K"; - - aliases { - led-boot = &led_status_eco_green; - led-failsafe = &led_status_eco_amber; - led-running = &led_status_eco_green; - led-upgrade = &led_status_eco_green; - }; - - /* - * sfp0/1 are "combo" port with each TP port (23/24), and they are - * connected to the RTL8218FB. Currently, there is no support for - * the chip and only TP ports work by the RTL8218D support. - */ - sfp0: sfp-p23 { - compatible = "sff,sfp"; - i2c-bus = <&i2c0>; - tx-fault-gpio = <&gpio1 0 GPIO_ACTIVE_HIGH>; - tx-disable-gpio = <&gpio1 1 GPIO_ACTIVE_HIGH>; - mod-def0-gpio = <&gpio1 2 GPIO_ACTIVE_LOW>; - los-gpio = <&gpio1 3 GPIO_ACTIVE_HIGH>; - }; - - sfp1: sfp-p24 { - compatible = "sff,sfp"; - i2c-bus = <&i2c1>; - tx-fault-gpio = <&gpio1 4 GPIO_ACTIVE_HIGH>; - tx-disable-gpio = <&gpio1 5 GPIO_ACTIVE_HIGH>; - mod-def0-gpio = <&gpio1 6 GPIO_ACTIVE_LOW>; - los-gpio = <&gpio1 7 GPIO_ACTIVE_HIGH>; - }; -}; - -&leds { - led_status_eco_amber: led-5 { - gpios = <&gpio2 1 GPIO_ACTIVE_LOW>; - color = ; - function = LED_FUNCTION_STATUS; - function-enumerator = <1>; - }; - - led_status_eco_green: led-6 { - gpios = <&gpio2 2 GPIO_ACTIVE_LOW>; - color = ; - function = LED_FUNCTION_STATUS; - function-enumerator = <2>; - }; -}; - -&i2c_gpio_0 { - scl-gpios = <&gpio0 0 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; - sda-gpios = <&gpio0 1 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; -}; - -&i2c_gpio_1 { - scl-gpios = <&gpio0 12 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; - sda-gpios = <&gpio0 13 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; -}; - -&gpio2 { - interrupt-controller; - #interrupt-cells = <2>; - interrupt-parent = <&gpio0>; - interrupts = <2 IRQ_TYPE_EDGE_FALLING>; - - /* - * GPIO12 (IO1_4): RTL8218FB - * - * This GPIO pin should be specified as "reset-gpio" in mdio node, but - * RTL8218FB phy won't be configured on RTL8218D support in the current - * phy driver. So, ethernet ports on the phy will be broken after hard- - * resetting. - * (RTL8218FB phy will be detected as RTL8218D by the phy driver) - * At the moment, configure this GPIO pin as gpio-hog to avoid breaking - * by resetting. - */ - ext_switch_reset { - gpio-hog; - gpios = <12 GPIO_ACTIVE_HIGH>; - output-high; - line-name = "ext-switch-reset"; - }; -}; - -&i2c_switch { - i2c0: i2c@0 { - #address-cells = <1>; - #size-cells = <0>; - reg = <0>; - }; - - i2c1: i2c@1 { - #address-cells = <1>; - #size-cells = <0>; - reg = <1>; - }; -}; - -ðernet0 { - mdio-bus { - compatible = "realtek,rtl838x-mdio"; - #address-cells = <1>; - #size-cells = <0>; - - INTERNAL_PHY(8) - INTERNAL_PHY(9) - INTERNAL_PHY(10) - INTERNAL_PHY(11) - INTERNAL_PHY(12) - INTERNAL_PHY(13) - INTERNAL_PHY(14) - INTERNAL_PHY(15) - - /* RTL8218FB */ - EXTERNAL_PHY(16) - EXTERNAL_PHY(17) - EXTERNAL_PHY(18) - EXTERNAL_PHY(19) - EXTERNAL_PHY(20) - EXTERNAL_PHY(21) - EXTERNAL_PHY(22) - EXTERNAL_PHY(23) - }; -}; - -&switch0 { - ports { - #address-cells = <1>; - #size-cells = <0>; - - SWITCH_PORT(8, 1, internal) - SWITCH_PORT(9, 2, internal) - SWITCH_PORT(10, 3, internal) - SWITCH_PORT(11, 4, internal) - SWITCH_PORT(12, 5, internal) - SWITCH_PORT(13, 6, internal) - SWITCH_PORT(14, 7, internal) - SWITCH_PORT(15, 8, internal) - - SWITCH_PORT(16, 9, qsgmii) - SWITCH_PORT(17, 10, qsgmii) - SWITCH_PORT(18, 11, qsgmii) - SWITCH_PORT(19, 12, qsgmii) - SWITCH_PORT(20, 13, qsgmii) - SWITCH_PORT(21, 14, qsgmii) - SWITCH_PORT(22, 15, qsgmii) - SWITCH_PORT(23, 16, qsgmii) - - port@28 { - ethernet = <ðernet0>; - reg = <28>; - phy-mode = "internal"; - - fixed-link { - speed = <1000>; - full-duplex; - }; - }; - }; -}; diff --git a/target/linux/realtek/dts-5.15/rtl8382_panasonic_m24eg-pn28240k.dts b/target/linux/realtek/dts-5.15/rtl8382_panasonic_m24eg-pn28240k.dts deleted file mode 100644 index d01352ec56..0000000000 --- a/target/linux/realtek/dts-5.15/rtl8382_panasonic_m24eg-pn28240k.dts +++ /dev/null @@ -1,188 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later OR MIT - -#include "rtl838x.dtsi" -#include "rtl83xx_panasonic_mxxeg-pn28xx0k.dtsi" - -#include - -/ { - compatible = "panasonic,m24eg-pn28240k", "realtek,rtl8382-soc"; - model = "Panasonic Switch-M24eG PN28240K"; - - aliases { - led-boot = &led_status_eco_green; - led-failsafe = &led_status_eco_amber; - led-running = &led_status_eco_green; - led-upgrade = &led_status_eco_green; - }; - - /* - * sfp0/1 are "combo" port with each TP port (23/24), and they are - * connected to the RTL8218FB. Currently, there is no support for - * the chip and only TP ports work by the RTL8218D support. - */ - sfp0: sfp-p23 { - compatible = "sff,sfp"; - i2c-bus = <&i2c0>; - tx-fault-gpio = <&gpio1 0 GPIO_ACTIVE_HIGH>; - tx-disable-gpio = <&gpio1 1 GPIO_ACTIVE_HIGH>; - mod-def0-gpio = <&gpio1 2 GPIO_ACTIVE_LOW>; - los-gpio = <&gpio1 3 GPIO_ACTIVE_HIGH>; - }; - - sfp1: sfp-p24 { - compatible = "sff,sfp"; - i2c-bus = <&i2c1>; - tx-fault-gpio = <&gpio1 4 GPIO_ACTIVE_HIGH>; - tx-disable-gpio = <&gpio1 5 GPIO_ACTIVE_HIGH>; - mod-def0-gpio = <&gpio1 6 GPIO_ACTIVE_LOW>; - los-gpio = <&gpio1 7 GPIO_ACTIVE_HIGH>; - }; -}; - -&leds { - led_status_eco_amber: led-5 { - gpios = <&gpio2 1 GPIO_ACTIVE_LOW>; - color = ; - function = LED_FUNCTION_STATUS; - function-enumerator = <1>; - }; - - led_status_eco_green: led-6 { - gpios = <&gpio2 2 GPIO_ACTIVE_LOW>; - color = ; - function = LED_FUNCTION_STATUS; - function-enumerator = <2>; - }; -}; - -&i2c_gpio_0 { - scl-gpios = <&gpio0 0 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; - sda-gpios = <&gpio0 1 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; -}; - -&i2c_gpio_1 { - scl-gpios = <&gpio0 12 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; - sda-gpios = <&gpio0 13 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; -}; - -&gpio2 { - interrupt-controller; - #interrupt-cells = <2>; - interrupt-parent = <&gpio0>; - interrupts = <2 IRQ_TYPE_EDGE_FALLING>; - - /* - * GPIO12 (IO1_4): RTL8218B + RTL8218FB - * - * This GPIO pin should be specified as "reset-gpio" in mdio node, - * but the current configuration of RTL8218B phy in the phy driver - * seems to be incomplete and RTL8218FB phy won't be configured on - * RTL8218D support. So, ethernet ports on these phys will be broken - * after hard-resetting. - * (RTL8218FB phy will be detected as RTL8218D by the phy driver) - * At the moment, configure this GPIO pin as gpio-hog to avoid breaking - * by resetting. - */ - ext_switch_reset { - gpio-hog; - gpios = <12 GPIO_ACTIVE_HIGH>; - output-high; - line-name = "ext-switch-reset"; - }; -}; - -&i2c_switch { - i2c0: i2c@0 { - #address-cells = <1>; - #size-cells = <0>; - reg = <0>; - }; - - i2c1: i2c@1 { - #address-cells = <1>; - #size-cells = <0>; - reg = <1>; - }; -}; - -ðernet0 { - mdio-bus { - compatible = "realtek,rtl838x-mdio"; - #address-cells = <1>; - #size-cells = <0>; - - EXTERNAL_PHY(0) - EXTERNAL_PHY(1) - EXTERNAL_PHY(2) - EXTERNAL_PHY(3) - EXTERNAL_PHY(4) - EXTERNAL_PHY(5) - EXTERNAL_PHY(6) - EXTERNAL_PHY(7) - - INTERNAL_PHY(8) - INTERNAL_PHY(9) - INTERNAL_PHY(10) - INTERNAL_PHY(11) - INTERNAL_PHY(12) - INTERNAL_PHY(13) - INTERNAL_PHY(14) - INTERNAL_PHY(15) - - /* RTL8218FB */ - EXTERNAL_PHY(16) - EXTERNAL_PHY(17) - EXTERNAL_PHY(18) - EXTERNAL_PHY(19) - EXTERNAL_PHY(20) - EXTERNAL_PHY(21) - EXTERNAL_PHY(22) - EXTERNAL_PHY(23) - }; -}; - -&switch0 { - ports { - #address-cells = <1>; - #size-cells = <0>; - - SWITCH_PORT(0, 1, qsgmii) - SWITCH_PORT(1, 2, qsgmii) - SWITCH_PORT(2, 3, qsgmii) - SWITCH_PORT(3, 4, qsgmii) - SWITCH_PORT(4, 5, qsgmii) - SWITCH_PORT(5, 6, qsgmii) - SWITCH_PORT(6, 7, qsgmii) - SWITCH_PORT(7, 8, qsgmii) - - SWITCH_PORT(8, 9, internal) - SWITCH_PORT(9, 10, internal) - SWITCH_PORT(10, 11, internal) - SWITCH_PORT(11, 12, internal) - SWITCH_PORT(12, 13, internal) - SWITCH_PORT(13, 14, internal) - SWITCH_PORT(14, 15, internal) - SWITCH_PORT(15, 16, internal) - - SWITCH_PORT(16, 17, qsgmii) - SWITCH_PORT(17, 18, qsgmii) - SWITCH_PORT(18, 19, qsgmii) - SWITCH_PORT(19, 20, qsgmii) - SWITCH_PORT(20, 21, qsgmii) - SWITCH_PORT(21, 22, qsgmii) - SWITCH_PORT(22, 23, qsgmii) - SWITCH_PORT(23, 24, qsgmii) - - port@28 { - ethernet = <ðernet0>; - reg = <28>; - phy-mode = "internal"; - - fixed-link { - speed = <1000>; - full-duplex; - }; - }; - }; -}; diff --git a/target/linux/realtek/dts-5.15/rtl8382_tplink_t1600g-28ts-v3.dts b/target/linux/realtek/dts-5.15/rtl8382_tplink_t1600g-28ts-v3.dts deleted file mode 100644 index d84987d209..0000000000 --- a/target/linux/realtek/dts-5.15/rtl8382_tplink_t1600g-28ts-v3.dts +++ /dev/null @@ -1,174 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later OR MIT - -#include "rtl838x.dtsi" - -#include -#include -#include - -/ { - compatible = "tplink,t1600g-28ts-v3", "realtek,rtl838x-soc"; - model = "TP-Link T1600G-28TS v3"; - - aliases { - led-boot = &led_sys; - led-failsafe = &led_sys; - led-running = &led_sys; - led-upgrade = &led_sys; - label-mac-device = ðernet0; - }; - - chosen { - stdout-path = "serial0:38400n8"; - }; - - leds { - pinctrl-names = "default"; - compatible = "gpio-leds"; - - led_sys: led-0 { - gpios = <&gpio0 0 GPIO_ACTIVE_HIGH>; - color = ; - function = LED_FUNCTION_STATUS; - }; - }; - - memory@0 { - device_type = "memory"; - reg = <0x0 0x10000000>; - }; -}; - -&spi0 { - status = "okay"; - - flash@0 { - compatible = "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <10000000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "u-boot"; - reg = <0x0 0xe0000>; - read-only; - }; - partition@e0000 { - label = "u-boot-env"; - reg = <0xe0000 0x20000>; - }; - partition@100000 { - compatible = "denx,uimage"; - label = "firmware"; - reg = <0x100000 0x1a00000>; - }; - partition@1b00000 { - label = "usrappfs"; - reg = <0x1b00000 0x400000>; - }; - partition@1f00000 { - label = "para"; - reg = <0x1f00000 0x100000>; - read-only; - - nvmem-layout { - compatible = "fixed-layout"; - #address-cells = <1>; - #size-cells = <1>; - - factory_macaddr: macaddr@fdff4 { - reg = <0xfdff4 0x6>; - }; - }; - }; - }; - }; -}; - -ðernet0 { - nvmem-cells = <&factory_macaddr>; - nvmem-cell-names = "mac-address"; - - mdio-bus { - compatible = "realtek,rtl838x-mdio"; - regmap = <ðernet0>; - #address-cells = <1>; - #size-cells = <0>; - - EXTERNAL_PHY(0) - EXTERNAL_PHY(1) - EXTERNAL_PHY(2) - EXTERNAL_PHY(3) - EXTERNAL_PHY(4) - EXTERNAL_PHY(5) - EXTERNAL_PHY(6) - EXTERNAL_PHY(7) - - INTERNAL_PHY(8) - INTERNAL_PHY(9) - INTERNAL_PHY(10) - INTERNAL_PHY(11) - INTERNAL_PHY(12) - INTERNAL_PHY(13) - INTERNAL_PHY(14) - INTERNAL_PHY(15) - - EXTERNAL_PHY(16) - EXTERNAL_PHY(17) - EXTERNAL_PHY(18) - EXTERNAL_PHY(19) - EXTERNAL_PHY(20) - EXTERNAL_PHY(21) - EXTERNAL_PHY(22) - EXTERNAL_PHY(23) - }; -}; - -&switch0 { - ports { - #address-cells = <1>; - #size-cells = <0>; - - SWITCH_PORT(0, 1, qsgmii) - SWITCH_PORT(1, 2, qsgmii) - SWITCH_PORT(2, 3, qsgmii) - SWITCH_PORT(3, 4, qsgmii) - SWITCH_PORT(4, 5, qsgmii) - SWITCH_PORT(5, 6, qsgmii) - SWITCH_PORT(6, 7, qsgmii) - SWITCH_PORT(7, 8, qsgmii) - - SWITCH_PORT(8, 9, internal) - SWITCH_PORT(9, 10, internal) - SWITCH_PORT(10, 11, internal) - SWITCH_PORT(11, 12, internal) - SWITCH_PORT(12, 13, internal) - SWITCH_PORT(13, 14, internal) - SWITCH_PORT(14, 15, internal) - SWITCH_PORT(15, 16, internal) - - SWITCH_PORT(16, 17, qsgmii) - SWITCH_PORT(17, 18, qsgmii) - SWITCH_PORT(18, 19, qsgmii) - SWITCH_PORT(19, 20, qsgmii) - SWITCH_PORT(20, 21, qsgmii) - SWITCH_PORT(21, 22, qsgmii) - SWITCH_PORT(22, 23, qsgmii) - SWITCH_PORT(23, 24, qsgmii) - - port@28 { - ethernet = <ðernet0>; - reg = <28>; - phy-mode = "internal"; - - fixed-link { - speed = <1000>; - full-duplex; - }; - }; - }; -}; diff --git a/target/linux/realtek/dts-5.15/rtl8382_zyxel_gs1900-16.dts b/target/linux/realtek/dts-5.15/rtl8382_zyxel_gs1900-16.dts deleted file mode 100644 index 6010da2e26..0000000000 --- a/target/linux/realtek/dts-5.15/rtl8382_zyxel_gs1900-16.dts +++ /dev/null @@ -1,36 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later - -#include "rtl8380_zyxel_gs1900.dtsi" - -/ { - compatible = "zyxel,gs1900-16", "realtek,rtl838x-soc"; - model = "Zyxel GS1900-16"; -}; - -&mdio { - EXTERNAL_PHY(16) - EXTERNAL_PHY(17) - EXTERNAL_PHY(18) - EXTERNAL_PHY(19) - EXTERNAL_PHY(20) - EXTERNAL_PHY(21) - EXTERNAL_PHY(22) - EXTERNAL_PHY(23) -}; - -&switch0 { - ports { - SWITCH_PORT(16, 9, qsgmii) - SWITCH_PORT(17, 10, qsgmii) - SWITCH_PORT(18, 11, qsgmii) - SWITCH_PORT(19, 12, qsgmii) - SWITCH_PORT(20, 13, qsgmii) - SWITCH_PORT(21, 14, qsgmii) - SWITCH_PORT(22, 15, qsgmii) - SWITCH_PORT(23, 16, qsgmii) - }; -}; - -&gpio1 { - /delete-node/ poe_enable; -}; diff --git a/target/linux/realtek/dts-5.15/rtl8382_zyxel_gs1900-24-v1.dts b/target/linux/realtek/dts-5.15/rtl8382_zyxel_gs1900-24-v1.dts deleted file mode 100644 index 6d98e7fae1..0000000000 --- a/target/linux/realtek/dts-5.15/rtl8382_zyxel_gs1900-24-v1.dts +++ /dev/null @@ -1,128 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later - -#include "rtl8380_zyxel_gs1900.dtsi" - -/ { - compatible = "zyxel,gs1900-24-v1", "realtek,rtl838x-soc"; - model = "Zyxel GS1900-24 v1"; - - memory@0 { - reg = <0x0 0x4000000>; - }; - - /* i2c of the left SFP cage: port 25 */ - i2c0: i2c-gpio-0 { - compatible = "i2c-gpio"; - sda-gpios = <&gpio1 24 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; - scl-gpios = <&gpio1 25 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; - i2c-gpio,delay-us = <2>; - #address-cells = <1>; - #size-cells = <0>; - }; - - sfp0: sfp-p25 { - compatible = "sff,sfp"; - i2c-bus = <&i2c0>; - los-gpio = <&gpio1 27 GPIO_ACTIVE_HIGH>; - tx-fault-gpio = <&gpio1 22 GPIO_ACTIVE_HIGH>; - mod-def0-gpio = <&gpio1 26 GPIO_ACTIVE_LOW>; - tx-disable-gpio = <&gpio1 23 GPIO_ACTIVE_HIGH>; - }; - - /* i2c of the right SFP cage: port 26 */ - i2c1: i2c-gpio-1 { - compatible = "i2c-gpio"; - sda-gpios = <&gpio1 30 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; - scl-gpios = <&gpio1 31 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; - i2c-gpio,delay-us = <2>; - #address-cells = <1>; - #size-cells = <0>; - }; - - sfp1: sfp-p26 { - compatible = "sff,sfp"; - i2c-bus = <&i2c1>; - los-gpio = <&gpio1 33 GPIO_ACTIVE_HIGH>; - tx-fault-gpio = <&gpio1 28 GPIO_ACTIVE_HIGH>; - mod-def0-gpio = <&gpio1 32 GPIO_ACTIVE_LOW>; - tx-disable-gpio = <&gpio1 29 GPIO_ACTIVE_HIGH>; - }; -}; - -&uart1 { - status = "okay"; -}; - -&mdio { - EXTERNAL_PHY(0) - EXTERNAL_PHY(1) - EXTERNAL_PHY(2) - EXTERNAL_PHY(3) - EXTERNAL_PHY(4) - EXTERNAL_PHY(5) - EXTERNAL_PHY(6) - EXTERNAL_PHY(7) - - EXTERNAL_PHY(16) - EXTERNAL_PHY(17) - EXTERNAL_PHY(18) - EXTERNAL_PHY(19) - EXTERNAL_PHY(20) - EXTERNAL_PHY(21) - EXTERNAL_PHY(22) - EXTERNAL_PHY(23) - - INTERNAL_PHY(24) - INTERNAL_PHY(26) -}; - -&switch0 { - ports { - SWITCH_PORT(0, 1, qsgmii) - SWITCH_PORT(1, 2, qsgmii) - SWITCH_PORT(2, 3, qsgmii) - SWITCH_PORT(3, 4, qsgmii) - SWITCH_PORT(4, 5, qsgmii) - SWITCH_PORT(5, 6, qsgmii) - SWITCH_PORT(6, 7, qsgmii) - SWITCH_PORT(7, 8, qsgmii) - - SWITCH_PORT(8, 9, internal) - SWITCH_PORT(9, 10, internal) - SWITCH_PORT(10, 11, internal) - SWITCH_PORT(11, 12, internal) - SWITCH_PORT(12, 13, internal) - SWITCH_PORT(13, 14, internal) - SWITCH_PORT(14, 15, internal) - SWITCH_PORT(15, 16, internal) - - SWITCH_PORT(16, 17, qsgmii) - SWITCH_PORT(17, 18, qsgmii) - SWITCH_PORT(18, 19, qsgmii) - SWITCH_PORT(19, 20, qsgmii) - SWITCH_PORT(20, 21, qsgmii) - SWITCH_PORT(21, 22, qsgmii) - SWITCH_PORT(22, 23, qsgmii) - SWITCH_PORT(23, 24, qsgmii) - - port@24 { - reg = <24>; - label = "lan25"; - phy-mode = "1000base-x"; - managed = "in-band-status"; - sfp = <&sfp0>; - }; - - port@26 { - reg = <26>; - label = "lan26"; - phy-mode = "1000base-x"; - managed = "in-band-status"; - sfp = <&sfp1>; - }; - }; -}; - -&gpio1 { - /delete-node/ poe_enable; -}; diff --git a/target/linux/realtek/dts-5.15/rtl8382_zyxel_gs1900-24e.dts b/target/linux/realtek/dts-5.15/rtl8382_zyxel_gs1900-24e.dts deleted file mode 100644 index b455ddf23a..0000000000 --- a/target/linux/realtek/dts-5.15/rtl8382_zyxel_gs1900-24e.dts +++ /dev/null @@ -1,63 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later - -#include "rtl8380_zyxel_gs1900.dtsi" - -/ { - compatible = "zyxel,gs1900-24e", "realtek,rtl838x-soc"; - model = "Zyxel GS1900-24E"; -}; - -&mdio { - EXTERNAL_PHY(0) - EXTERNAL_PHY(1) - EXTERNAL_PHY(2) - EXTERNAL_PHY(3) - EXTERNAL_PHY(4) - EXTERNAL_PHY(5) - EXTERNAL_PHY(6) - EXTERNAL_PHY(7) - - EXTERNAL_PHY(16) - EXTERNAL_PHY(17) - EXTERNAL_PHY(18) - EXTERNAL_PHY(19) - EXTERNAL_PHY(20) - EXTERNAL_PHY(21) - EXTERNAL_PHY(22) - EXTERNAL_PHY(23) -}; - -&switch0 { - ports { - SWITCH_PORT(1, 1, qsgmii) - SWITCH_PORT(0, 2, qsgmii) - SWITCH_PORT(3, 3, qsgmii) - SWITCH_PORT(2, 4, qsgmii) - SWITCH_PORT(5, 5, qsgmii) - SWITCH_PORT(4, 6, qsgmii) - SWITCH_PORT(7, 7, qsgmii) - SWITCH_PORT(6, 8, qsgmii) - - SWITCH_PORT(9, 9, internal) - SWITCH_PORT(8, 10, internal) - SWITCH_PORT(11, 11, internal) - SWITCH_PORT(10, 12, internal) - SWITCH_PORT(13, 13, internal) - SWITCH_PORT(12, 14, internal) - SWITCH_PORT(15, 15, internal) - SWITCH_PORT(14, 16, internal) - - SWITCH_PORT(17, 17, qsgmii) - SWITCH_PORT(16, 18, qsgmii) - SWITCH_PORT(19, 19, qsgmii) - SWITCH_PORT(18, 20, qsgmii) - SWITCH_PORT(21, 21, qsgmii) - SWITCH_PORT(20, 22, qsgmii) - SWITCH_PORT(23, 23, qsgmii) - SWITCH_PORT(22, 24, qsgmii) - }; -}; - -&gpio1 { - /delete-node/ poe_enable; -}; diff --git a/target/linux/realtek/dts-5.15/rtl8382_zyxel_gs1900-24ep.dts b/target/linux/realtek/dts-5.15/rtl8382_zyxel_gs1900-24ep.dts deleted file mode 100644 index 25c82f089e..0000000000 --- a/target/linux/realtek/dts-5.15/rtl8382_zyxel_gs1900-24ep.dts +++ /dev/null @@ -1,63 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later - -#include "rtl8380_zyxel_gs1900.dtsi" - -/ { - compatible = "zyxel,gs1900-24ep", "realtek,rtl838x-soc"; - model = "Zyxel GS1900-24EP Switch"; -}; - -&uart1 { - status = "okay"; -}; - -&mdio { - EXTERNAL_PHY(0) - EXTERNAL_PHY(1) - EXTERNAL_PHY(2) - EXTERNAL_PHY(3) - EXTERNAL_PHY(4) - EXTERNAL_PHY(5) - EXTERNAL_PHY(6) - EXTERNAL_PHY(7) - - EXTERNAL_PHY(16) - EXTERNAL_PHY(17) - EXTERNAL_PHY(18) - EXTERNAL_PHY(19) - EXTERNAL_PHY(20) - EXTERNAL_PHY(21) - EXTERNAL_PHY(22) - EXTERNAL_PHY(23) -}; - -&switch0 { - ports { - SWITCH_PORT(0, 1, qsgmii) - SWITCH_PORT(1, 2, qsgmii) - SWITCH_PORT(2, 3, qsgmii) - SWITCH_PORT(3, 4, qsgmii) - SWITCH_PORT(4, 5, qsgmii) - SWITCH_PORT(5, 6, qsgmii) - SWITCH_PORT(6, 7, qsgmii) - SWITCH_PORT(7, 8, qsgmii) - - SWITCH_PORT(8, 9, internal) - SWITCH_PORT(9, 10, internal) - SWITCH_PORT(10, 11, internal) - SWITCH_PORT(11, 12, internal) - SWITCH_PORT(12, 13, internal) - SWITCH_PORT(13, 14, internal) - SWITCH_PORT(14, 15, internal) - SWITCH_PORT(15, 16, internal) - - SWITCH_PORT(16, 17, qsgmii) - SWITCH_PORT(17, 18, qsgmii) - SWITCH_PORT(18, 19, qsgmii) - SWITCH_PORT(19, 20, qsgmii) - SWITCH_PORT(20, 21, qsgmii) - SWITCH_PORT(21, 22, qsgmii) - SWITCH_PORT(22, 23, qsgmii) - SWITCH_PORT(23, 24, qsgmii) - }; -}; diff --git a/target/linux/realtek/dts-5.15/rtl8382_zyxel_gs1900-24hp-v1.dts b/target/linux/realtek/dts-5.15/rtl8382_zyxel_gs1900-24hp-v1.dts deleted file mode 100644 index fa9bef89d6..0000000000 --- a/target/linux/realtek/dts-5.15/rtl8382_zyxel_gs1900-24hp-v1.dts +++ /dev/null @@ -1,125 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later - -#include "rtl8380_zyxel_gs1900.dtsi" - -/ { - compatible = "zyxel,gs1900-24hp-v1", "realtek,rtl838x-soc"; - model = "Zyxel GS1900-24HP v1"; - - memory@0 { - reg = <0x0 0x4000000>; - }; - - /* i2c of the left SFP cage: port 25 */ - i2c0: i2c-gpio-0 { - compatible = "i2c-gpio"; - sda-gpios = <&gpio1 24 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; - scl-gpios = <&gpio1 25 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; - i2c-gpio,delay-us = <2>; - #address-cells = <1>; - #size-cells = <0>; - }; - - sfp0: sfp-p25 { - compatible = "sff,sfp"; - i2c-bus = <&i2c0>; - los-gpio = <&gpio1 27 GPIO_ACTIVE_HIGH>; - tx-fault-gpio = <&gpio1 22 GPIO_ACTIVE_HIGH>; - mod-def0-gpio = <&gpio1 26 GPIO_ACTIVE_LOW>; - tx-disable-gpio = <&gpio1 23 GPIO_ACTIVE_HIGH>; - }; - - /* i2c of the right SFP cage: port 26 */ - i2c1: i2c-gpio-1 { - compatible = "i2c-gpio"; - sda-gpios = <&gpio1 30 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; - scl-gpios = <&gpio1 31 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; - i2c-gpio,delay-us = <2>; - #address-cells = <1>; - #size-cells = <0>; - }; - - sfp1: sfp-p26 { - compatible = "sff,sfp"; - i2c-bus = <&i2c1>; - los-gpio = <&gpio1 33 GPIO_ACTIVE_HIGH>; - tx-fault-gpio = <&gpio1 28 GPIO_ACTIVE_HIGH>; - mod-def0-gpio = <&gpio1 32 GPIO_ACTIVE_LOW>; - tx-disable-gpio = <&gpio1 29 GPIO_ACTIVE_HIGH>; - }; -}; - -&uart1 { - status = "okay"; -}; - -&mdio { - EXTERNAL_PHY(0) - EXTERNAL_PHY(1) - EXTERNAL_PHY(2) - EXTERNAL_PHY(3) - EXTERNAL_PHY(4) - EXTERNAL_PHY(5) - EXTERNAL_PHY(6) - EXTERNAL_PHY(7) - - EXTERNAL_PHY(16) - EXTERNAL_PHY(17) - EXTERNAL_PHY(18) - EXTERNAL_PHY(19) - EXTERNAL_PHY(20) - EXTERNAL_PHY(21) - EXTERNAL_PHY(22) - EXTERNAL_PHY(23) - - INTERNAL_PHY(24) - INTERNAL_PHY(26) -}; - -&switch0 { - ports { - SWITCH_PORT(0, 1, qsgmii) - SWITCH_PORT(1, 2, qsgmii) - SWITCH_PORT(2, 3, qsgmii) - SWITCH_PORT(3, 4, qsgmii) - SWITCH_PORT(4, 5, qsgmii) - SWITCH_PORT(5, 6, qsgmii) - SWITCH_PORT(6, 7, qsgmii) - SWITCH_PORT(7, 8, qsgmii) - - SWITCH_PORT(8, 9, internal) - SWITCH_PORT(9, 10, internal) - SWITCH_PORT(10, 11, internal) - SWITCH_PORT(11, 12, internal) - SWITCH_PORT(12, 13, internal) - SWITCH_PORT(13, 14, internal) - SWITCH_PORT(14, 15, internal) - SWITCH_PORT(15, 16, internal) - - SWITCH_PORT(16, 17, qsgmii) - SWITCH_PORT(17, 18, qsgmii) - SWITCH_PORT(18, 19, qsgmii) - SWITCH_PORT(19, 20, qsgmii) - SWITCH_PORT(20, 21, qsgmii) - SWITCH_PORT(21, 22, qsgmii) - SWITCH_PORT(22, 23, qsgmii) - SWITCH_PORT(23, 24, qsgmii) - - port@24 { - reg = <24>; - label = "lan25"; - phy-mode = "1000base-x"; - managed = "in-band-status"; - sfp = <&sfp0>; - }; - - port@26 { - reg = <26>; - label = "lan26"; - phy-mode = "1000base-x"; - managed = "in-band-status"; - sfp = <&sfp1>; - }; - }; -}; - diff --git a/target/linux/realtek/dts-5.15/rtl8382_zyxel_gs1900-24hp-v2.dts b/target/linux/realtek/dts-5.15/rtl8382_zyxel_gs1900-24hp-v2.dts deleted file mode 100644 index 93011cbdaa..0000000000 --- a/target/linux/realtek/dts-5.15/rtl8382_zyxel_gs1900-24hp-v2.dts +++ /dev/null @@ -1,121 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later - -#include "rtl8380_zyxel_gs1900.dtsi" - -/ { - compatible = "zyxel,gs1900-24hp-v2", "realtek,rtl838x-soc"; - model = "Zyxel GS1900-24HP v2 Switch"; - - /* i2c of the left SFP cage: port 25 */ - i2c0: i2c-gpio-0 { - compatible = "i2c-gpio"; - sda-gpios = <&gpio1 24 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; - scl-gpios = <&gpio1 25 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; - i2c-gpio,delay-us = <2>; - #address-cells = <1>; - #size-cells = <0>; - }; - - sfp0: sfp-p25 { - compatible = "sff,sfp"; - i2c-bus = <&i2c0>; - los-gpio = <&gpio1 27 GPIO_ACTIVE_HIGH>; - tx-fault-gpio = <&gpio1 22 GPIO_ACTIVE_HIGH>; - mod-def0-gpio = <&gpio1 26 GPIO_ACTIVE_LOW>; - tx-disable-gpio = <&gpio1 23 GPIO_ACTIVE_HIGH>; - }; - - /* i2c of the right SFP cage: port 26 */ - i2c1: i2c-gpio-1 { - compatible = "i2c-gpio"; - sda-gpios = <&gpio1 30 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; - scl-gpios = <&gpio1 31 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; - i2c-gpio,delay-us = <2>; - #address-cells = <1>; - #size-cells = <0>; - }; - - sfp1: sfp-p26 { - compatible = "sff,sfp"; - i2c-bus = <&i2c1>; - los-gpio = <&gpio1 33 GPIO_ACTIVE_HIGH>; - tx-fault-gpio = <&gpio1 28 GPIO_ACTIVE_HIGH>; - mod-def0-gpio = <&gpio1 32 GPIO_ACTIVE_LOW>; - tx-disable-gpio = <&gpio1 29 GPIO_ACTIVE_HIGH>; - }; -}; - -&uart1 { - status = "okay"; -}; - -&mdio { - EXTERNAL_PHY(0) - EXTERNAL_PHY(1) - EXTERNAL_PHY(2) - EXTERNAL_PHY(3) - EXTERNAL_PHY(4) - EXTERNAL_PHY(5) - EXTERNAL_PHY(6) - EXTERNAL_PHY(7) - - EXTERNAL_PHY(16) - EXTERNAL_PHY(17) - EXTERNAL_PHY(18) - EXTERNAL_PHY(19) - EXTERNAL_PHY(20) - EXTERNAL_PHY(21) - EXTERNAL_PHY(22) - EXTERNAL_PHY(23) - - INTERNAL_PHY(24) - INTERNAL_PHY(26) -}; - -&switch0 { - ports { - SWITCH_PORT(0, 1, qsgmii) - SWITCH_PORT(1, 2, qsgmii) - SWITCH_PORT(2, 3, qsgmii) - SWITCH_PORT(3, 4, qsgmii) - SWITCH_PORT(4, 5, qsgmii) - SWITCH_PORT(5, 6, qsgmii) - SWITCH_PORT(6, 7, qsgmii) - SWITCH_PORT(7, 8, qsgmii) - - SWITCH_PORT(8, 9, internal) - SWITCH_PORT(9, 10, internal) - SWITCH_PORT(10, 11, internal) - SWITCH_PORT(11, 12, internal) - SWITCH_PORT(12, 13, internal) - SWITCH_PORT(13, 14, internal) - SWITCH_PORT(14, 15, internal) - SWITCH_PORT(15, 16, internal) - - SWITCH_PORT(16, 17, qsgmii) - SWITCH_PORT(17, 18, qsgmii) - SWITCH_PORT(18, 19, qsgmii) - SWITCH_PORT(19, 20, qsgmii) - SWITCH_PORT(20, 21, qsgmii) - SWITCH_PORT(21, 22, qsgmii) - SWITCH_PORT(22, 23, qsgmii) - SWITCH_PORT(23, 24, qsgmii) - - - port@24 { - reg = <24>; - label = "lan25"; - phy-mode = "1000base-x"; - managed = "in-band-status"; - sfp = <&sfp0>; - }; - - port@26 { - reg = <26>; - label = "lan26"; - phy-mode = "1000base-x"; - managed = "in-band-status"; - sfp = <&sfp1>; - }; - }; -}; diff --git a/target/linux/realtek/dts-5.15/rtl838x.dtsi b/target/linux/realtek/dts-5.15/rtl838x.dtsi deleted file mode 100644 index 13ba6450b2..0000000000 --- a/target/linux/realtek/dts-5.15/rtl838x.dtsi +++ /dev/null @@ -1,293 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later OR MIT - -#include - -/dts-v1/; - -#define STRINGIZE(s) #s -#define LAN_LABEL(p, s) STRINGIZE(p ## s) -#define SWITCH_PORT_LABEL(n) LAN_LABEL(lan, n) - -#define INTERNAL_PHY(n) \ - phy##n: ethernet-phy@##n { \ - reg = <##n>; \ - compatible = "ethernet-phy-ieee802.3-c22"; \ - phy-is-integrated; \ - }; - -#define EXTERNAL_PHY(n) \ - phy##n: ethernet-phy@##n { \ - reg = <##n>; \ - compatible = "ethernet-phy-ieee802.3-c22"; \ - }; - -#define EXTERNAL_SFP_PHY(n) \ - phy##n: ethernet-phy@##n { \ - compatible = "ethernet-phy-ieee802.3-c22"; \ - sfp; \ - media = "fibre"; \ - reg = <##n>; \ - }; - -#define EXTERNAL_SFP_PHY_FULL(n, s) \ - phy##n: ethernet-phy@##n { \ - compatible = "ethernet-phy-ieee802.3-c22"; \ - sfp = <&sfp##s>; \ - reg = <##n>; \ - }; - -#define SWITCH_PORT(n, s, m) \ - port##n: port@##n { \ - reg = <##n>; \ - label = SWITCH_PORT_LABEL(s) ; \ - phy-handle = <&phy##n>; \ - phy-mode = #m ; \ - }; - -#define SWITCH_SFP_PORT(n, s, m) \ - port##n: port@##n { \ - reg = <##n>; \ - label = SWITCH_PORT_LABEL(s) ; \ - phy-handle = <&phy##n>; \ - phy-mode = #m ; \ - fixed-link { \ - speed = <1000>; \ - full-duplex; \ - }; \ - }; - -/ { - #address-cells = <1>; - #size-cells = <1>; - - compatible = "realtek,rtl838x-soc"; - - osc: oscillator { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <25000000>; - }; - - ccu: clock-controller { - compatible = "realtek,rtl8380-clock"; - #clock-cells = <1>; - clocks = <&osc>; - clock-names = "ref_clk"; - }; - - cpus { - #address-cells = <1>; - #size-cells = <0>; - - cpu@0 { - compatible = "mips,mips4KEc"; - reg = <0>; - clocks = <&ccu CLK_CPU>; - operating-points-v2 = <&cpu_opp_table>; - }; - }; - - cpu_opp_table: opp-table-0 { - compatible = "operating-points-v2"; - opp-shared; - - opp00 { - opp-hz = /bits/ 64 <325000000>; - }; - opp01 { - opp-hz = /bits/ 64 <350000000>; - }; - opp02 { - opp-hz = /bits/ 64 <375000000>; - }; - opp03 { - opp-hz = /bits/ 64 <400000000>; - }; - opp04 { - opp-hz = /bits/ 64 <425000000>; - }; - opp05 { - opp-hz = /bits/ 64 <450000000>; - }; - opp06 { - opp-hz = /bits/ 64 <475000000>; - }; - opp07 { - opp-hz = /bits/ 64 <500000000>; - }; - }; - - aliases { - serial0 = &uart0; - serial1 = &uart1; - }; - - chosen { - bootargs = "earlycon"; - stdout-path = "serial0:115200n8"; - }; - - cpuintc: cpuintc { - compatible = "mti,cpu-interrupt-controller"; - #address-cells = <0>; - #interrupt-cells = <1>; - interrupt-controller; - }; - - soc: soc { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0x0 0x18000000 0x10000>; - - intc: interrupt-controller@3000 { - compatible = "realtek,rtl8380-intc", "realtek,rtl-intc"; - reg = <0x3000 0x18>; - interrupt-controller; - #interrupt-cells = <2>; - - interrupt-parent = <&cpuintc>; - interrupts = <2>, <3>, <4>, <5>, <6>; - }; - - spi0: spi@1200 { - compatible = "realtek,rtl8380-spi"; - reg = <0x1200 0x100>; - - #address-cells = <1>; - #size-cells = <0>; - }; - - timer0: timer@3100 { - compatible = "realtek,rtl8380-timer", "realtek,otto-timer"; - reg = <0x3100 0x10>, <0x3110 0x10>, <0x3120 0x10>, - <0x3130 0x10>, <0x3140 0x10>; - - interrupt-parent = <&intc>; - interrupts = <29 4>, <28 4>, <17 4>, <16 4>, <15 4>; - clocks = <&ccu CLK_LXB>; - }; - - uart0: uart@2000 { - compatible = "ns16550a"; - reg = <0x2000 0x100>; - - clocks = <&ccu CLK_LXB>; - - interrupt-parent = <&intc>; - interrupts = <31 1>; - - reg-io-width = <1>; - reg-shift = <2>; - fifo-size = <1>; - no-loopback-test; - }; - - uart1: uart@2100 { - pinctrl-names = "default"; - pinctrl-0 = <&enable_uart1>; - - compatible = "ns16550a"; - reg = <0x2100 0x100>; - - clocks = <&ccu CLK_LXB>; - - interrupt-parent = <&intc>; - interrupts = <30 0>; - - reg-io-width = <1>; - reg-shift = <2>; - fifo-size = <1>; - no-loopback-test; - - status = "disabled"; - }; - - watchdog0: watchdog@3150 { - compatible = "realtek,rtl8380-wdt"; - reg = <0x3150 0xc>; - - realtek,reset-mode = "soc"; - - clocks = <&ccu CLK_LXB>; - timeout-sec = <30>; - - interrupt-parent = <&intc>; - interrupt-names = "phase1", "phase2"; - interrupts = <19 3>, <18 4>; - }; - - gpio0: gpio-controller@3500 { - compatible = "realtek,rtl8380-gpio", "realtek,otto-gpio"; - reg = <0x3500 0x20>; - - gpio-controller; - #gpio-cells = <2>; - ngpios = <24>; - - interrupt-controller; - #interrupt-cells = <2>; - interrupt-parent = <&intc>; - interrupts = <23 3>; - }; - }; - - pinmux: pinmux@1b001000 { - compatible = "pinctrl-single"; - reg = <0x1b001000 0x4>; - - pinctrl-single,bit-per-mux; - pinctrl-single,register-width = <32>; - pinctrl-single,function-mask = <0x1>; - #pinctrl-cells = <2>; - - enable_uart1: pinmux_enable_uart1 { - pinctrl-single,bits = <0x0 0x10 0x10>; - }; - }; - - /* LED_GLB_CTRL */ - pinmux_led: pinmux@1b00a000 { - compatible = "pinctrl-single"; - reg = <0x1b00a000 0x4>; - - pinctrl-single,bit-per-mux; - pinctrl-single,register-width = <32>; - pinctrl-single,function-mask = <0x1>; - #pinctrl-cells = <2>; - - /* enable GPIO 0 */ - pinmux_disable_sys_led: disable_sys_led { - pinctrl-single,bits = <0x0 0x0 0x8000>; - }; - }; - - ethernet0: ethernet@1b00a300 { - compatible = "realtek,rtl838x-eth"; - reg = <0x1b00a300 0x100>; - interrupt-parent = <&intc>; - interrupts = <24 3>; - #interrupt-cells = <1>; - phy-mode = "internal"; - - fixed-link { - speed = <1000>; - full-duplex; - }; - }; - - sram0: sram@9f000000 { - compatible = "mmio-sram"; - reg = <0x9f000000 0x10000>; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0 0x9f000000 0x10000>; - }; - - switch0: switch@1b000000 { - compatible = "realtek,rtl83xx-switch"; - - interrupt-parent = <&intc>; - interrupts = <20 2>; - }; -}; diff --git a/target/linux/realtek/dts-5.15/rtl838x_hpe_1920.dtsi b/target/linux/realtek/dts-5.15/rtl838x_hpe_1920.dtsi deleted file mode 100644 index c7b6013117..0000000000 --- a/target/linux/realtek/dts-5.15/rtl838x_hpe_1920.dtsi +++ /dev/null @@ -1,96 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later OR MIT - -#include -#include - -/ { - chosen { - stdout-path = "serial0:38400n8"; - }; - - memory@0 { - device_type = "memory"; - reg = <0x0 0x8000000>; - }; - - watchdog1: watchdog { - // PT7A7514 - compatible = "linux,wdt-gpio"; - gpios = <&gpio0 0 GPIO_ACTIVE_HIGH>; - hw_algo = "toggle"; - hw_margin_ms = <1000>; - always-running; - - pinctrl-names = "default"; - pinctrl-0 = <&pinmux_disable_sys_led>; - }; -}; - -&watchdog0 { - status = "disabled"; -}; - -&spi0 { - status = "okay"; - - flash@0 { - compatible = "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <50000000>; - m25p,fast-read; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "bootware_basic"; - reg = <0x0 0x50000>; - read-only; - }; - - partition@60000 { - label = "bootware_data"; - reg = <0x60000 0x30000>; - read-only; - }; - - partition@90000 { - label = "bootware_extend"; - reg = <0x90000 0x40000>; - read-only; - }; - - partition@100000 { - label = "bootware_basic_backup"; - reg = <0x100000 0x50000>; - read-only; - }; - - partition@160000 { - label = "bootware_data_backup"; - reg = <0x160000 0x30000>; - read-only; - }; - - partition@190000 { - label = "bootware_extend_backup"; - reg = <0x190000 0x40000>; - read-only; - }; - - partition@300000 { - label = "firmware"; - compatible = "h3c,vfs-firmware"; - reg = <0x300000 0x1cf0000>; - }; - - partition@1ff0000 { - label = "factory"; - reg = <0x1ff0000 0x10000>; - read-only; - }; - }; - }; -}; diff --git a/target/linux/realtek/dts-5.15/rtl8393_d-link_dgs-1210-52.dts b/target/linux/realtek/dts-5.15/rtl8393_d-link_dgs-1210-52.dts deleted file mode 100644 index 5b876e7c43..0000000000 --- a/target/linux/realtek/dts-5.15/rtl8393_d-link_dgs-1210-52.dts +++ /dev/null @@ -1,163 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later OR MIT - -#include "rtl839x.dtsi" -#include "rtl83xx_d-link_dgs-1210_common.dtsi" -#include "rtl83xx_d-link_dgs-1210_gpio.dtsi" -#include "rtl839x_d-link_dgs-1210_gpio.dtsi" - -/ { - compatible = "d-link,dgs-1210-52", "realtek,rtl8393-soc"; - model = "D-Link DGS-1210-52"; -}; - -ðernet0 { - mdio: mdio-bus { - compatible = "realtek,rtl838x-mdio"; - regmap = <ðernet0>; - #address-cells = <1>; - #size-cells = <0>; - - /* External phy RTL8218B #1 */ - EXTERNAL_PHY(0) - EXTERNAL_PHY(1) - EXTERNAL_PHY(2) - EXTERNAL_PHY(3) - EXTERNAL_PHY(4) - EXTERNAL_PHY(5) - EXTERNAL_PHY(6) - EXTERNAL_PHY(7) - - /* External phy RTL8218B #2 */ - EXTERNAL_PHY(8) - EXTERNAL_PHY(9) - EXTERNAL_PHY(10) - EXTERNAL_PHY(11) - EXTERNAL_PHY(12) - EXTERNAL_PHY(13) - EXTERNAL_PHY(14) - EXTERNAL_PHY(15) - - /* External phy RTL8218B #3 */ - EXTERNAL_PHY(16) - EXTERNAL_PHY(17) - EXTERNAL_PHY(18) - EXTERNAL_PHY(19) - EXTERNAL_PHY(20) - EXTERNAL_PHY(21) - EXTERNAL_PHY(22) - EXTERNAL_PHY(23) - - /* External phy RTL8218B #4 */ - EXTERNAL_PHY(24) - EXTERNAL_PHY(25) - EXTERNAL_PHY(26) - EXTERNAL_PHY(27) - EXTERNAL_PHY(28) - EXTERNAL_PHY(29) - EXTERNAL_PHY(30) - EXTERNAL_PHY(31) - - /* External phy RTL8218B #5 */ - EXTERNAL_PHY(32) - EXTERNAL_PHY(33) - EXTERNAL_PHY(34) - EXTERNAL_PHY(35) - EXTERNAL_PHY(36) - EXTERNAL_PHY(37) - EXTERNAL_PHY(38) - EXTERNAL_PHY(39) - - /* External phy RTL8218B #6 */ - EXTERNAL_PHY(40) - EXTERNAL_PHY(41) - EXTERNAL_PHY(42) - EXTERNAL_PHY(43) - EXTERNAL_PHY(44) - EXTERNAL_PHY(45) - EXTERNAL_PHY(46) - EXTERNAL_PHY(47) - - /* External phy RTL8214FC */ - EXTERNAL_SFP_PHY_FULL(48, 0) - EXTERNAL_SFP_PHY_FULL(49, 1) - EXTERNAL_SFP_PHY_FULL(50, 2) - EXTERNAL_SFP_PHY_FULL(51, 3) - }; -}; - -&switch0 { - ports { - #address-cells = <1>; - #size-cells = <0>; - - SWITCH_PORT(0, 1, qsgmii) - SWITCH_PORT(1, 2, qsgmii) - SWITCH_PORT(2, 3, qsgmii) - SWITCH_PORT(3, 4, qsgmii) - SWITCH_PORT(4, 5, qsgmii) - SWITCH_PORT(5, 6, qsgmii) - SWITCH_PORT(6, 7, qsgmii) - SWITCH_PORT(7, 8, qsgmii) - - SWITCH_PORT(8, 9, qsgmii) - SWITCH_PORT(9, 10, qsgmii) - SWITCH_PORT(10, 11, qsgmii) - SWITCH_PORT(11, 12, qsgmii) - SWITCH_PORT(12, 13, qsgmii) - SWITCH_PORT(13, 14, qsgmii) - SWITCH_PORT(14, 15, qsgmii) - SWITCH_PORT(15, 16, qsgmii) - - SWITCH_PORT(16, 17, qsgmii) - SWITCH_PORT(17, 18, qsgmii) - SWITCH_PORT(18, 19, qsgmii) - SWITCH_PORT(19, 20, qsgmii) - SWITCH_PORT(20, 21, qsgmii) - SWITCH_PORT(21, 22, qsgmii) - SWITCH_PORT(22, 23, qsgmii) - SWITCH_PORT(23, 24, qsgmii) - - SWITCH_PORT(24, 25, qsgmii) - SWITCH_PORT(25, 26, qsgmii) - SWITCH_PORT(26, 27, qsgmii) - SWITCH_PORT(27, 28, qsgmii) - SWITCH_PORT(28, 29, qsgmii) - SWITCH_PORT(29, 30, qsgmii) - SWITCH_PORT(30, 31, qsgmii) - SWITCH_PORT(31, 32, qsgmii) - - SWITCH_PORT(32, 33, qsgmii) - SWITCH_PORT(33, 34, qsgmii) - SWITCH_PORT(34, 35, qsgmii) - SWITCH_PORT(35, 36, qsgmii) - SWITCH_PORT(36, 37, qsgmii) - SWITCH_PORT(37, 38, qsgmii) - SWITCH_PORT(38, 39, qsgmii) - SWITCH_PORT(39, 40, qsgmii) - - SWITCH_PORT(40, 41, qsgmii) - SWITCH_PORT(41, 42, qsgmii) - SWITCH_PORT(42, 43, qsgmii) - SWITCH_PORT(43, 44, qsgmii) - SWITCH_PORT(44, 45, qsgmii) - SWITCH_PORT(45, 46, qsgmii) - SWITCH_PORT(46, 47, qsgmii) - SWITCH_PORT(47, 48, qsgmii) - - SWITCH_PORT(48, 49, qsgmii) - SWITCH_PORT(49, 50, qsgmii) - SWITCH_PORT(50, 51, qsgmii) - SWITCH_PORT(51, 52, qsgmii) - - /* CPU-Port */ - port@52 { - ethernet = <ðernet0>; - reg = <52>; - phy-mode = "qsgmii"; - fixed-link { - speed = <1000>; - full-duplex; - }; - }; - }; -}; diff --git a/target/linux/realtek/dts-5.15/rtl8393_netgear_gs750e.dts b/target/linux/realtek/dts-5.15/rtl8393_netgear_gs750e.dts deleted file mode 100644 index 5a7ed276bf..0000000000 --- a/target/linux/realtek/dts-5.15/rtl8393_netgear_gs750e.dts +++ /dev/null @@ -1,253 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later OR MIT - -#include "rtl839x.dtsi" - -#include -#include - -/ { - compatible = "netgear,gs750e", "realtek,rtl8393-soc"; - model = "Netgear GS750E"; - - aliases { - label-mac-device = ðernet0; - }; - - memory@0 { - device_type = "memory"; - reg = <0x0 0x8000000>; - }; - - keys { - compatible = "gpio-keys"; - - reset { - label = "reset"; - gpios = <&gpio0 11 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - }; - - gpio-restart { - compatible = "gpio-restart"; - gpios = <&gpio0 10 GPIO_ACTIVE_LOW>; - }; - - virtual_flash { - compatible = "mtd-concat"; - - devices = <&fwconcat0>, <&fwconcat1>, <&fwconcat2>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "firmware"; - reg = <0x0 0x760000>; - compatible = "openwrt,uimage", "denx,uimage"; - openwrt,ih-magic = <0x174e4741>; - }; - }; - }; -}; - -&spi0 { - status = "okay"; - - flash@0 { - compatible = "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <10000000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "u-boot"; - reg = <0x0 0x80000>; - read-only; - }; - - partition@80000 { - label = "u-boot-env"; - reg = <0x80000 0x10000>; - read-only; - }; - - partition@90000 { - label = "u-boot-env2"; - reg = <0x90000 0x10000>; - read-only; - }; - - fwconcat1: partition@a0000 { - label = "jffs2_cfg"; - reg = <0xa0000 0x80000>; - }; - - fwconcat2: partition@120000 { - label = "jffs2_log"; - reg = <0x120000 0x80000>; - }; - - fwconcat0: partition@1a0000 { - label = "runtime"; - reg = <0x1a0000 0x660000>; - }; - }; - }; -}; - -ðernet0 { - mdio: mdio-bus { - compatible = "realtek,rtl838x-mdio"; - #address-cells = <1>; - #size-cells = <0>; - // Switch doesn't come back properly after a reset so don't. - // reset-gpios = <&gpio0 23 GPIO_ACTIVE_LOW>; - - /* External phy RTL8218B #1 */ - EXTERNAL_PHY(0) - EXTERNAL_PHY(1) - EXTERNAL_PHY(2) - EXTERNAL_PHY(3) - EXTERNAL_PHY(4) - EXTERNAL_PHY(5) - EXTERNAL_PHY(6) - EXTERNAL_PHY(7) - - /* External phy RTL8218B #2 */ - EXTERNAL_PHY(8) - EXTERNAL_PHY(9) - EXTERNAL_PHY(10) - EXTERNAL_PHY(11) - EXTERNAL_PHY(12) - EXTERNAL_PHY(13) - EXTERNAL_PHY(14) - EXTERNAL_PHY(15) - - /* External phy RTL8218B #3 */ - EXTERNAL_PHY(16) - EXTERNAL_PHY(17) - EXTERNAL_PHY(18) - EXTERNAL_PHY(19) - EXTERNAL_PHY(20) - EXTERNAL_PHY(21) - EXTERNAL_PHY(22) - EXTERNAL_PHY(23) - - /* External phy RTL8218B #4 */ - EXTERNAL_PHY(24) - EXTERNAL_PHY(25) - EXTERNAL_PHY(26) - EXTERNAL_PHY(27) - EXTERNAL_PHY(28) - EXTERNAL_PHY(29) - EXTERNAL_PHY(30) - EXTERNAL_PHY(31) - - /* External phy RTL8218B #5 */ - EXTERNAL_PHY(32) - EXTERNAL_PHY(33) - EXTERNAL_PHY(34) - EXTERNAL_PHY(35) - EXTERNAL_PHY(36) - EXTERNAL_PHY(37) - EXTERNAL_PHY(38) - EXTERNAL_PHY(39) - - /* External phy RTL8218B #6 */ - EXTERNAL_PHY(40) - EXTERNAL_PHY(41) - EXTERNAL_PHY(42) - EXTERNAL_PHY(43) - EXTERNAL_PHY(44) - EXTERNAL_PHY(45) - EXTERNAL_PHY(46) - EXTERNAL_PHY(47) - - /* RTL8393 Internal SerDes */ - INTERNAL_PHY(48) - INTERNAL_PHY(49) - }; -}; - -&switch0 { - ports { - #address-cells = <1>; - #size-cells = <0>; - - SWITCH_PORT(0, 1, qsgmii) - SWITCH_PORT(1, 2, qsgmii) - SWITCH_PORT(2, 3, qsgmii) - SWITCH_PORT(3, 4, qsgmii) - SWITCH_PORT(4, 5, qsgmii) - SWITCH_PORT(5, 6, qsgmii) - SWITCH_PORT(6, 7, qsgmii) - SWITCH_PORT(7, 8, qsgmii) - - SWITCH_PORT(8, 9, qsgmii) - SWITCH_PORT(9, 10, qsgmii) - SWITCH_PORT(10, 11, qsgmii) - SWITCH_PORT(11, 12, qsgmii) - SWITCH_PORT(12, 13, qsgmii) - SWITCH_PORT(13, 14, qsgmii) - SWITCH_PORT(14, 15, qsgmii) - SWITCH_PORT(15, 16, qsgmii) - - SWITCH_PORT(16, 17, qsgmii) - SWITCH_PORT(17, 18, qsgmii) - SWITCH_PORT(18, 19, qsgmii) - SWITCH_PORT(19, 20, qsgmii) - SWITCH_PORT(20, 21, qsgmii) - SWITCH_PORT(21, 22, qsgmii) - SWITCH_PORT(22, 23, qsgmii) - SWITCH_PORT(23, 24, qsgmii) - - SWITCH_PORT(24, 25, qsgmii) - SWITCH_PORT(25, 26, qsgmii) - SWITCH_PORT(26, 27, qsgmii) - SWITCH_PORT(27, 28, qsgmii) - SWITCH_PORT(28, 29, qsgmii) - SWITCH_PORT(29, 30, qsgmii) - SWITCH_PORT(30, 31, qsgmii) - SWITCH_PORT(31, 32, qsgmii) - - SWITCH_PORT(32, 33, qsgmii) - SWITCH_PORT(33, 34, qsgmii) - SWITCH_PORT(34, 35, qsgmii) - SWITCH_PORT(35, 36, qsgmii) - SWITCH_PORT(36, 37, qsgmii) - SWITCH_PORT(37, 38, qsgmii) - SWITCH_PORT(38, 39, qsgmii) - SWITCH_PORT(39, 40, qsgmii) - - SWITCH_PORT(40, 41, qsgmii) - SWITCH_PORT(41, 42, qsgmii) - SWITCH_PORT(42, 43, qsgmii) - SWITCH_PORT(43, 44, qsgmii) - SWITCH_PORT(44, 45, qsgmii) - SWITCH_PORT(45, 46, qsgmii) - SWITCH_PORT(46, 47, qsgmii) - SWITCH_PORT(47, 48, qsgmii) - - /* SFP cages */ - SWITCH_SFP_PORT(48, 49, sgmii) - SWITCH_SFP_PORT(49, 50, sgmii) - - /* CPU-Port */ - port@52 { - ethernet = <ðernet0>; - reg = <52>; - phy-mode = "qsgmii"; - fixed-link { - speed = <1000>; - full-duplex; - }; - }; - }; -}; diff --git a/target/linux/realtek/dts-5.15/rtl8393_panasonic_m48eg-pn28480k.dts b/target/linux/realtek/dts-5.15/rtl8393_panasonic_m48eg-pn28480k.dts deleted file mode 100644 index 8e7d32de1c..0000000000 --- a/target/linux/realtek/dts-5.15/rtl8393_panasonic_m48eg-pn28480k.dts +++ /dev/null @@ -1,378 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later OR MIT - -#include "rtl839x.dtsi" -#include "rtl83xx_panasonic_mxxeg-pn28xx0k.dtsi" - -#include - -/ { - compatible = "panasonic,m48eg-pn28480k", "realtek,rtl8393-soc"; - model = "Panasonic Switch-M48eG PN28480K"; - - aliases { - led-boot = &led_status_eco_green; - led-failsafe = &led_status_eco_amber; - led-running = &led_status_eco_green; - led-upgrade = &led_status_eco_green; - }; - - fan: gpio-fan { - compatible = "gpio-fan"; - gpios = <&gpio0 19 GPIO_ACTIVE_HIGH>; - /* the actual speeds (rpm) are unknown, just use dummy values */ - gpio-fan,speed-map = <1 0>, <2 1>; - #cooling-cells = <2>; - }; - - /* - * sfp0/1/2/3 are "combo" port with each TP port (45/46/47/48), - * and they are connected to the RTL8218FB. Currently, there is - * no support for the chip and only TP ports work by the RTL8218B - * support. - */ - sfp0: sfp-p45 { - compatible = "sff,sfp"; - i2c-bus = <&i2c0>; - tx-fault-gpio = <&gpio1 0 GPIO_ACTIVE_HIGH>; - tx-disable-gpio = <&gpio1 1 GPIO_ACTIVE_HIGH>; - mod-def0-gpio = <&gpio1 2 GPIO_ACTIVE_LOW>; - los-gpio = <&gpio1 3 GPIO_ACTIVE_HIGH>; - }; - - sfp1: sfp-p46 { - compatible = "sff,sfp"; - i2c-bus = <&i2c1>; - tx-fault-gpio = <&gpio1 4 GPIO_ACTIVE_HIGH>; - tx-disable-gpio = <&gpio1 5 GPIO_ACTIVE_HIGH>; - mod-def0-gpio = <&gpio1 6 GPIO_ACTIVE_LOW>; - los-gpio = <&gpio1 7 GPIO_ACTIVE_HIGH>; - }; - - sfp2: sfp-p47 { - compatible = "sff,sfp"; - i2c-bus = <&i2c2>; - tx-fault-gpio = <&gpio1 8 GPIO_ACTIVE_HIGH>; - tx-disable-gpio = <&gpio1 9 GPIO_ACTIVE_HIGH>; - mod-def0-gpio = <&gpio1 10 GPIO_ACTIVE_LOW>; - los-gpio = <&gpio1 11 GPIO_ACTIVE_HIGH>; - }; - - sfp3: sfp-p48 { - compatible = "sff,sfp"; - i2c-bus = <&i2c3>; - tx-fault-gpio = <&gpio1 12 GPIO_ACTIVE_HIGH>; - tx-disable-gpio = <&gpio1 13 GPIO_ACTIVE_HIGH>; - mod-def0-gpio = <&gpio1 14 GPIO_ACTIVE_LOW>; - los-gpio = <&gpio1 15 GPIO_ACTIVE_HIGH>; - }; - - thermal-zones { - /* - * Zone for SoC temperature - * - * Fan speed: - * - * - 0-44 celsius: Low - * - 45-54 celsius: High - */ - cpu-thermal { - polling-delay-passive = <1000>; - polling-delay = <2000>; - - thermal-sensors = <&tsens_soc>; - - trips { - cpu_alert: trip-point { - temperature = <45000>; - hysteresis = <4000>; - type = "active"; - }; - - cpu_crit { - temperature = <55000>; - hysteresis = <1000>; - type = "critical"; - }; - }; - - cooling-maps { - map { - trip = <&cpu_alert>; - cooling-device = <&fan 0 1>; - }; - }; - }; - - /* - * Zone for system temperature - * - * Fan speed: - * - * - 0-39 celsius: Low - * - 40-49 celsius: High - * - * Note: official recommended ranges of temperature on each - * fan speed setting: - * - * - Low speed : 0-40 celsius - * - High speed: 0-50 celsius - * - * (stock firmware doesn't support auto-selection of - * speed and need to be selected manually by user) - */ - sys-thermal { - polling-delay-passive = <1000>; - polling-delay = <2000>; - - thermal-sensors = <&tsens_sys>; - - trips { - sys_alert: trip-point { - temperature = <40000>; - hysteresis = <4000>; - type = "active"; - }; - - sys_crit { - temperature = <50000>; - hysteresis = <2000>; - type = "critical"; - }; - }; - - cooling-maps { - map { - trip = <&sys_alert>; - cooling-device = <&fan 0 1>; - }; - }; - }; - }; -}; - -&leds { - led_status_eco_amber: led-5 { - gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>; - color = ; - function = LED_FUNCTION_STATUS; - function-enumerator = <1>; - }; - - led_status_eco_green: led-6 { - gpios = <&gpio2 2 GPIO_ACTIVE_HIGH>; - color = ; - function = LED_FUNCTION_STATUS; - function-enumerator = <2>; - }; -}; - -&i2c_gpio_0 { - scl-gpios = <&gpio0 16 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; - sda-gpios = <&gpio0 17 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; - - /* Microchip TCN75A (for SoC) */ - tsens_soc: sensor@48 { - compatible = "microchip,tcn75"; - reg = <0x48>; - #thermal-sensor-cells = <0>; - }; - - /* Microchip TCN75A (for System) */ - tsens_sys: sensor@49 { - compatible = "microchip,tcn75"; - reg = <0x49>; - #thermal-sensor-cells = <0>; - }; -}; - -&i2c_gpio_1 { - scl-gpios = <&gpio0 14 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; - sda-gpios = <&gpio0 15 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; -}; - -&gpio2 { - interrupt-controller; - #interrupt-cells = <2>; - interrupt-parent = <&gpio0>; - interrupts = <18 IRQ_TYPE_EDGE_FALLING>; - - /* - * GPIO12 (IO1_4): 5x RTL8218B + RTL8218FB - * - * This GPIO pin should be specified as "reset-gpio" in mdio node, - * but the current configuration of RTL8218B phy in the phy driver - * seems to be incomplete and RTL8218FB phy won't be configured on - * RTL8218D support. So, ethernet ports on these phys will be broken - * after hard-resetting. - * (RTL8218FB phy will be detected as RTL8218D by the phy driver) - * At the moment, configure this GPIO pin as gpio-hog to avoid breaking - * by resetting. - */ - ext_switch_reset { - gpio-hog; - gpios = <12 GPIO_ACTIVE_HIGH>; - output-high; - line-name = "ext-switch-reset"; - }; -}; - -&i2c_switch { - i2c0: i2c@0 { - #address-cells = <1>; - #size-cells = <0>; - reg = <0>; - }; - - i2c1: i2c@1 { - #address-cells = <1>; - #size-cells = <0>; - reg = <1>; - }; - - i2c2: i2c@2 { - #address-cells = <1>; - #size-cells = <0>; - reg = <2>; - }; - - i2c3: i2c@3 { - #address-cells = <1>; - #size-cells = <0>; - reg = <3>; - }; -}; - -ðernet0 { - mdio-bus { - compatible = "realtek,rtl838x-mdio"; - #address-cells = <1>; - #size-cells = <0>; - - EXTERNAL_PHY(0) - EXTERNAL_PHY(1) - EXTERNAL_PHY(2) - EXTERNAL_PHY(3) - EXTERNAL_PHY(4) - EXTERNAL_PHY(5) - EXTERNAL_PHY(6) - EXTERNAL_PHY(7) - - EXTERNAL_PHY(8) - EXTERNAL_PHY(9) - EXTERNAL_PHY(10) - EXTERNAL_PHY(11) - EXTERNAL_PHY(12) - EXTERNAL_PHY(13) - EXTERNAL_PHY(14) - EXTERNAL_PHY(15) - - EXTERNAL_PHY(16) - EXTERNAL_PHY(17) - EXTERNAL_PHY(18) - EXTERNAL_PHY(19) - EXTERNAL_PHY(20) - EXTERNAL_PHY(21) - EXTERNAL_PHY(22) - EXTERNAL_PHY(23) - - EXTERNAL_PHY(24) - EXTERNAL_PHY(25) - EXTERNAL_PHY(26) - EXTERNAL_PHY(27) - EXTERNAL_PHY(28) - EXTERNAL_PHY(29) - EXTERNAL_PHY(30) - EXTERNAL_PHY(31) - - EXTERNAL_PHY(32) - EXTERNAL_PHY(33) - EXTERNAL_PHY(34) - EXTERNAL_PHY(35) - EXTERNAL_PHY(36) - EXTERNAL_PHY(37) - EXTERNAL_PHY(38) - EXTERNAL_PHY(39) - - /* RTL8218FB */ - EXTERNAL_PHY(40) - EXTERNAL_PHY(41) - EXTERNAL_PHY(42) - EXTERNAL_PHY(43) - EXTERNAL_PHY(44) - EXTERNAL_PHY(45) - EXTERNAL_PHY(46) - EXTERNAL_PHY(47) - }; -}; - -&switch0 { - ports { - #address-cells = <1>; - #size-cells = <0>; - - SWITCH_PORT(0, 1, qsgmii) - SWITCH_PORT(1, 2, qsgmii) - SWITCH_PORT(2, 3, qsgmii) - SWITCH_PORT(3, 4, qsgmii) - SWITCH_PORT(4, 5, qsgmii) - SWITCH_PORT(5, 6, qsgmii) - SWITCH_PORT(6, 7, qsgmii) - SWITCH_PORT(7, 8, qsgmii) - - SWITCH_PORT(8, 9, qsgmii) - SWITCH_PORT(9, 10, qsgmii) - SWITCH_PORT(10, 11, qsgmii) - SWITCH_PORT(11, 12, qsgmii) - SWITCH_PORT(12, 13, qsgmii) - SWITCH_PORT(13, 14, qsgmii) - SWITCH_PORT(14, 15, qsgmii) - SWITCH_PORT(15, 16, qsgmii) - - SWITCH_PORT(16, 17, qsgmii) - SWITCH_PORT(17, 18, qsgmii) - SWITCH_PORT(18, 19, qsgmii) - SWITCH_PORT(19, 20, qsgmii) - SWITCH_PORT(20, 21, qsgmii) - SWITCH_PORT(21, 22, qsgmii) - SWITCH_PORT(22, 23, qsgmii) - SWITCH_PORT(23, 24, qsgmii) - - SWITCH_PORT(24, 25, qsgmii) - SWITCH_PORT(25, 26, qsgmii) - SWITCH_PORT(26, 27, qsgmii) - SWITCH_PORT(27, 28, qsgmii) - SWITCH_PORT(28, 29, qsgmii) - SWITCH_PORT(29, 30, qsgmii) - SWITCH_PORT(30, 31, qsgmii) - SWITCH_PORT(31, 32, qsgmii) - - SWITCH_PORT(32, 33, qsgmii) - SWITCH_PORT(33, 34, qsgmii) - SWITCH_PORT(34, 35, qsgmii) - SWITCH_PORT(35, 36, qsgmii) - SWITCH_PORT(36, 37, qsgmii) - SWITCH_PORT(37, 38, qsgmii) - SWITCH_PORT(38, 39, qsgmii) - SWITCH_PORT(39, 40, qsgmii) - - SWITCH_PORT(40, 41, qsgmii) - SWITCH_PORT(41, 42, qsgmii) - SWITCH_PORT(42, 43, qsgmii) - SWITCH_PORT(43, 44, qsgmii) - SWITCH_PORT(44, 45, qsgmii) - SWITCH_PORT(45, 46, qsgmii) - SWITCH_PORT(46, 47, qsgmii) - SWITCH_PORT(47, 48, qsgmii) - - port@52 { - ethernet = <ðernet0>; - reg = <52>; - phy-mode = "internal"; - - fixed-link { - speed = <1000>; - full-duplex; - }; - }; - }; -}; diff --git a/target/linux/realtek/dts-5.15/rtl8393_tplink_sg2452p-v4.dts b/target/linux/realtek/dts-5.15/rtl8393_tplink_sg2452p-v4.dts deleted file mode 100644 index 4a19d83fda..0000000000 --- a/target/linux/realtek/dts-5.15/rtl8393_tplink_sg2452p-v4.dts +++ /dev/null @@ -1,419 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later OR MIT - -#include "rtl839x.dtsi" - -#include -#include -#include - -/ { - compatible = "tplink,sg2452p-v4", "realtek,rtl8393-soc"; - model = "TP-Link SG2452P v4"; - - memory@0 { - device_type = "memory"; - reg = <0x0 0x10000000>; - }; - - aliases { - led-boot = &led_sys; - led-failsafe = &led_sys; - led-running = &led_sys; - led-upgrade = &led_sys; - label-mac-device = ðernet0; - }; - - chosen { - stdout-path = "serial0:38400n8"; - }; - - keys { - compatible = "gpio-keys"; - - reset { - label = "reset"; - gpios = <&gpio0 20 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - - speed { - label = "speed"; - gpios = <&gpio0 19 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - }; - - gpio_fan_sys { - compatible = "gpio-fan"; - alarm-gpios = <&gpio0 12 GPIO_ACTIVE_LOW>; - }; - - gpio_fan_psu_1 { - pinctrl-names = "default"; - pinctrl-0 = <&disable_jtag>; - compatible = "gpio-fan"; - - alarm-gpios = <&gpio0 7 GPIO_ACTIVE_LOW>; - gpios = <&gpio0 4 GPIO_ACTIVE_LOW>; - /* the actual speeds (rpm) are unknown, just use dummy values */ - gpio-fan,speed-map = <1 0>, <2 1>; - #cooling-cells = <2>; - }; - - gpio_fan_psu_2 { - /* This fan runs in parallel to PSU1 fan, but has a separate - * alarm GPIO. This is not (yet) supported by the gpio-fan driver, - * so a separate instance is added - */ - compatible = "gpio-fan"; - alarm-gpios = <&gpio0 14 GPIO_ACTIVE_LOW>; - }; - - leds { - pinctrl-names = "default"; - compatible = "gpio-leds"; - - led-0 { - gpios = <&gpio0 8 GPIO_ACTIVE_HIGH>; - color = ; - function = LED_FUNCTION_INDICATOR; - }; - - led-1 { - gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>; - color = ; - function = LED_FUNCTION_INDICATOR; - }; - - led_sys: led-2 { - gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>; - color = ; - function = LED_FUNCTION_STATUS; - }; - - led-3 { - gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>; - color = ; - function = LED_FUNCTION_STATUS; - }; - - led-4 { - gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>; - color = ; - function = "fault-fan"; - }; - - led-5 { - gpios = <&gpio0 18 GPIO_ACTIVE_HIGH>; - color = ; - function = "alarm-poe"; - }; - }; - - i2c-gpio-0 { - compatible = "i2c-gpio"; - sda-gpios = <&gpio0 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; - scl-gpios = <&gpio0 1 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; - i2c-gpio,delay-us = <2>; - #address-cells = <1>; - #size-cells = <0>; - - /* LAN9 - LAN12 */ - tps23861@5 { - compatible = "ti,tps23861"; - reg = <0x05>; - }; - - /* LAN17 - LAN20 */ - tps23861@6 { - compatible = "ti,tps23861"; - reg = <0x06>; - }; - - /* LAN45 - LAN48 */ - tps23861@9 { - compatible = "ti,tps23861"; - reg = <0x09>; - }; - - /* LAN37 - LAN40 */ - tps23861@a { - compatible = "ti,tps23861"; - reg = <0x0a>; - }; - - /* LAN1 - LAN4 */ - tps23861@14 { - compatible = "ti,tps23861"; - reg = <0x14>; - }; - - /* LAN25 - LAN28 */ - tps23861@24 { - compatible = "ti,tps23861"; - reg = <0x24>; - }; - - /* LAN33 - LAN 36 */ - tps23861@25 { - compatible = "ti,tps23861"; - reg = <0x25>; - }; - - /* LAN41 - LAN44 */ - tps23861@26 { - compatible = "ti,tps23861"; - reg = <0x26>; - }; - - /* LAN13 - LAN16 */ - tps23861@29 { - compatible = "ti,tps23861"; - reg = <0x29>; - }; - - /* LAN29 - LAN32 */ - tps23861@2c { - compatible = "ti,tps23861"; - reg = <0x2c>; - }; - - /* LAN5 - LAN8 */ - tps23861@48 { - compatible = "ti,tps23861"; - reg = <0x48>; - }; - - /* LAN21 - LAN24 */ - tps23861@49 { - compatible = "ti,tps23861"; - reg = <0x49>; - }; - }; - - gpio-restart { - compatible = "gpio-restart"; - gpios = <&gpio0 17 GPIO_ACTIVE_LOW>; - }; -}; - -&gpio0 { - poe-enable { - gpio-hog; - gpios = <23 GPIO_ACTIVE_HIGH>; - output-high; - line-name = "poe-enable"; - }; -}; - -&spi0 { - status = "okay"; - flash@0 { - compatible = "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <10000000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "u-boot"; - reg = <0x0 0xe0000>; - read-only; - }; - partition@e0000 { - label = "u-boot-env"; - reg = <0xe0000 0x20000>; - }; - - /* We use the "sys", "usrimg1" and "usrimg2" partitions - * as firmware since the kernel needs to be in "sys", but the - * partition is too small to hold the "rootfs" as well. - * The original partition map contains: - * - * partition@100000 { - * label = "sys"; - * reg = <0x100000 0x600000>; - * }; - * partition@700000 { - * label = "usrimg1"; - * reg = <0x700000 0xa00000>; - * }; - * partition@1100000 { - * label = "usrimg2"; - * reg = <0x1100000 0xa00000>; - * }; - */ - - partition@100000 { - label = "firmware"; - reg = <0x100000 0x1a00000>; - }; - partition@1b00000 { - label = "usrappfs"; - reg = <0x1b00000 0x400000>; - }; - partition@1f00000 { - label = "para"; - reg = <0x1f00000 0x100000>; - read-only; - - nvmem-layout { - compatible = "fixed-layout"; - #address-cells = <1>; - #size-cells = <1>; - - factory_macaddr: macaddr@fdff4 { - reg = <0xfdff4 0x6>; - }; - }; - }; - }; - }; -}; - -ðernet0 { - nvmem-cells = <&factory_macaddr>; - nvmem-cell-names = "mac-address"; - - mdio: mdio-bus { - compatible = "realtek,rtl838x-mdio"; - #address-cells = <1>; - #size-cells = <0>; - - /* External phy RTL8218B #1 */ - EXTERNAL_PHY(0) - EXTERNAL_PHY(1) - EXTERNAL_PHY(2) - EXTERNAL_PHY(3) - EXTERNAL_PHY(4) - EXTERNAL_PHY(5) - EXTERNAL_PHY(6) - EXTERNAL_PHY(7) - - /* External phy RTL8218B #2 */ - EXTERNAL_PHY(8) - EXTERNAL_PHY(9) - EXTERNAL_PHY(10) - EXTERNAL_PHY(11) - EXTERNAL_PHY(12) - EXTERNAL_PHY(13) - EXTERNAL_PHY(14) - EXTERNAL_PHY(15) - - /* External phy RTL8218B #3 */ - EXTERNAL_PHY(16) - EXTERNAL_PHY(17) - EXTERNAL_PHY(18) - EXTERNAL_PHY(19) - EXTERNAL_PHY(20) - EXTERNAL_PHY(21) - EXTERNAL_PHY(22) - EXTERNAL_PHY(23) - - /* External phy RTL8218B #4 */ - EXTERNAL_PHY(24) - EXTERNAL_PHY(25) - EXTERNAL_PHY(26) - EXTERNAL_PHY(27) - EXTERNAL_PHY(28) - EXTERNAL_PHY(29) - EXTERNAL_PHY(30) - EXTERNAL_PHY(31) - - /* External phy RTL8218B #5 */ - EXTERNAL_PHY(32) - EXTERNAL_PHY(33) - EXTERNAL_PHY(34) - EXTERNAL_PHY(35) - EXTERNAL_PHY(36) - EXTERNAL_PHY(37) - EXTERNAL_PHY(38) - EXTERNAL_PHY(39) - - /* External phy RTL8218B #6 */ - EXTERNAL_PHY(40) - EXTERNAL_PHY(41) - EXTERNAL_PHY(42) - EXTERNAL_PHY(43) - EXTERNAL_PHY(44) - EXTERNAL_PHY(45) - EXTERNAL_PHY(46) - EXTERNAL_PHY(47) - }; -}; - -&switch0 { - ports { - #address-cells = <1>; - #size-cells = <0>; - - SWITCH_PORT(0, 01, qsgmii) - SWITCH_PORT(1, 02, qsgmii) - SWITCH_PORT(2, 03, qsgmii) - SWITCH_PORT(3, 04, qsgmii) - SWITCH_PORT(4, 05, qsgmii) - SWITCH_PORT(5, 06, qsgmii) - SWITCH_PORT(6, 07, qsgmii) - SWITCH_PORT(7, 08, qsgmii) - - SWITCH_PORT(8, 09, qsgmii) - SWITCH_PORT(9, 10, qsgmii) - SWITCH_PORT(10, 11, qsgmii) - SWITCH_PORT(11, 12, qsgmii) - SWITCH_PORT(12, 13, qsgmii) - SWITCH_PORT(13, 14, qsgmii) - SWITCH_PORT(14, 15, qsgmii) - SWITCH_PORT(15, 16, qsgmii) - - SWITCH_PORT(16, 17, qsgmii) - SWITCH_PORT(17, 18, qsgmii) - SWITCH_PORT(18, 19, qsgmii) - SWITCH_PORT(19, 20, qsgmii) - SWITCH_PORT(20, 21, qsgmii) - SWITCH_PORT(21, 22, qsgmii) - SWITCH_PORT(22, 23, qsgmii) - SWITCH_PORT(23, 24, qsgmii) - - SWITCH_PORT(24, 25, qsgmii) - SWITCH_PORT(25, 26, qsgmii) - SWITCH_PORT(26, 27, qsgmii) - SWITCH_PORT(27, 28, qsgmii) - SWITCH_PORT(28, 29, qsgmii) - SWITCH_PORT(29, 30, qsgmii) - SWITCH_PORT(30, 31, qsgmii) - SWITCH_PORT(31, 32, qsgmii) - - SWITCH_PORT(32, 33, qsgmii) - SWITCH_PORT(33, 34, qsgmii) - SWITCH_PORT(34, 35, qsgmii) - SWITCH_PORT(35, 36, qsgmii) - SWITCH_PORT(36, 37, qsgmii) - SWITCH_PORT(37, 38, qsgmii) - SWITCH_PORT(38, 39, qsgmii) - SWITCH_PORT(39, 40, qsgmii) - - SWITCH_PORT(40, 41, qsgmii) - SWITCH_PORT(41, 42, qsgmii) - SWITCH_PORT(42, 43, qsgmii) - SWITCH_PORT(43, 44, qsgmii) - SWITCH_PORT(44, 45, qsgmii) - SWITCH_PORT(45, 46, qsgmii) - SWITCH_PORT(46, 47, qsgmii) - SWITCH_PORT(47, 48, qsgmii) - - /* CPU-Port */ - port@52 { - ethernet = <ðernet0>; - reg = <52>; - phy-mode = "internal"; - - fixed-link { - speed = <1000>; - full-duplex; - }; - }; - }; -}; diff --git a/target/linux/realtek/dts-5.15/rtl8393_zyxel_gs1900-48.dts b/target/linux/realtek/dts-5.15/rtl8393_zyxel_gs1900-48.dts deleted file mode 100644 index c7ddd8313a..0000000000 --- a/target/linux/realtek/dts-5.15/rtl8393_zyxel_gs1900-48.dts +++ /dev/null @@ -1,320 +0,0 @@ -/dts-v1/; - -#include "rtl839x.dtsi" - -#include -#include - -/ { - compatible = "zyxel,gs1900-48", "realtek,rtl8393-soc"; - model = "Zyxel GS1900-48"; - - aliases { - led-boot = &led_sys; - led-failsafe = &led_sys; - led-running = &led_sys; - led-upgrade = &led_sys; - }; - - memory@0 { - device_type = "memory"; - reg = <0x0 0x8000000>; - }; - - leds { - pinctrl-names = "default"; - pinctrl-0 = <&pinmux_disable_sys_led>; - compatible = "gpio-leds"; - - led_sys: sys { - label = "green:sys"; - gpios = <&gpio0 0 GPIO_ACTIVE_HIGH>; - }; - }; - - gpio1: rtl8231-gpio { - compatible = "realtek,rtl8231-gpio"; - #gpio-cells = <2>; - indirect-access-bus-id = <3>; - gpio-controller; - }; - - gpio-restart { - compatible = "gpio-restart"; - gpios = <&gpio1 5 GPIO_ACTIVE_LOW>; - }; - - keys { - compatible = "gpio-keys-polled"; - poll-interval = <20>; - - mode { - label = "reset"; - gpios = <&gpio1 3 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - }; - - /* i2c of the left SFP cage: port 49 */ - i2c0: i2c-gpio-0 { - compatible = "i2c-gpio"; - sda-gpios = <&gpio1 24 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; - scl-gpios = <&gpio1 25 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; - i2c-gpio,delay-us = <2>; - #address-cells = <1>; - #size-cells = <0>; - }; - - sfp0: sfp-p9 { - compatible = "sff,sfp"; - i2c-bus = <&i2c0>; - los-gpio = <&gpio1 27 GPIO_ACTIVE_HIGH>; - tx-fault-gpio = <&gpio1 22 GPIO_ACTIVE_HIGH>; - mod-def0-gpio = <&gpio1 26 GPIO_ACTIVE_LOW>; - tx-disable-gpio = <&gpio1 23 GPIO_ACTIVE_HIGH>; - }; - - /* i2c of the right SFP cage: port 50 */ - i2c1: i2c-gpio-1 { - compatible = "i2c-gpio"; - sda-gpios = <&gpio1 30 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; - scl-gpios = <&gpio1 31 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; - i2c-gpio,delay-us = <2>; - #address-cells = <1>; - #size-cells = <0>; - }; - - sfp1: sfp-p10 { - compatible = "sff,sfp"; - i2c-bus = <&i2c1>; - los-gpio = <&gpio1 33 GPIO_ACTIVE_HIGH>; - tx-fault-gpio = <&gpio1 28 GPIO_ACTIVE_HIGH>; - mod-def0-gpio = <&gpio1 32 GPIO_ACTIVE_LOW>; - tx-disable-gpio = <&gpio1 29 GPIO_ACTIVE_HIGH>; - }; -}; - -&spi0 { - status = "okay"; - flash@0 { - compatible = "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <10000000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "u-boot"; - reg = <0x0 0x40000>; - read-only; - }; - partition@40000 { - label = "u-boot-env"; - reg = <0x40000 0x10000>; - read-only; - }; - partition@50000 { - label = "u-boot-env2"; - reg = <0x50000 0x10000>; - read-only; - }; - partition@60000 { - label = "jffs"; - reg = <0x60000 0x100000>; - }; - partition@160000 { - label = "jffs2"; - reg = <0x160000 0x100000>; - }; - partition@260000 { - label = "firmware"; - reg = <0x260000 0x6d0000>; - compatible = "openwrt,uimage", "denx,uimage"; - openwrt,ih-magic = <0x83800000>; - }; - partition@930000 { - label = "runtime2"; - reg = <0x930000 0x6d0000>; - }; - }; - }; -}; - -ðernet0 { - mdio: mdio-bus { - compatible = "realtek,rtl838x-mdio"; - regmap = <ðernet0>; - #address-cells = <1>; - #size-cells = <0>; - - /* External phy RTL8218B #1 */ - EXTERNAL_PHY(0) - EXTERNAL_PHY(1) - EXTERNAL_PHY(2) - EXTERNAL_PHY(3) - EXTERNAL_PHY(4) - EXTERNAL_PHY(5) - EXTERNAL_PHY(6) - EXTERNAL_PHY(7) - - /* External phy RTL8218B #2 */ - EXTERNAL_PHY(8) - EXTERNAL_PHY(9) - EXTERNAL_PHY(10) - EXTERNAL_PHY(11) - EXTERNAL_PHY(12) - EXTERNAL_PHY(13) - EXTERNAL_PHY(14) - EXTERNAL_PHY(15) - - /* External phy RTL8218B #3 */ - EXTERNAL_PHY(16) - EXTERNAL_PHY(17) - EXTERNAL_PHY(18) - EXTERNAL_PHY(19) - EXTERNAL_PHY(20) - EXTERNAL_PHY(21) - EXTERNAL_PHY(22) - EXTERNAL_PHY(23) - - /* External phy RTL8218B #4 */ - EXTERNAL_PHY(24) - EXTERNAL_PHY(25) - EXTERNAL_PHY(26) - EXTERNAL_PHY(27) - EXTERNAL_PHY(28) - EXTERNAL_PHY(29) - EXTERNAL_PHY(30) - EXTERNAL_PHY(31) - - /* External phy RTL8218B #5 */ - EXTERNAL_PHY(32) - EXTERNAL_PHY(33) - EXTERNAL_PHY(34) - EXTERNAL_PHY(35) - EXTERNAL_PHY(36) - EXTERNAL_PHY(37) - EXTERNAL_PHY(38) - EXTERNAL_PHY(39) - - /* External phy RTL8218B #6 */ - EXTERNAL_PHY(40) - EXTERNAL_PHY(41) - EXTERNAL_PHY(42) - EXTERNAL_PHY(43) - EXTERNAL_PHY(44) - EXTERNAL_PHY(45) - EXTERNAL_PHY(46) - EXTERNAL_PHY(47) - - /* RTL8393 Internal SerDes */ - INTERNAL_PHY(48) - INTERNAL_PHY(49) - }; -}; - -&switch0 { - ports { - #address-cells = <1>; - #size-cells = <0>; - - SWITCH_PORT(0, 01, qsgmii) - SWITCH_PORT(1, 02, qsgmii) - SWITCH_PORT(2, 03, qsgmii) - SWITCH_PORT(3, 04, qsgmii) - SWITCH_PORT(4, 05, qsgmii) - SWITCH_PORT(5, 06, qsgmii) - SWITCH_PORT(6, 07, qsgmii) - SWITCH_PORT(7, 08, qsgmii) - - SWITCH_PORT(8, 09, qsgmii) - SWITCH_PORT(9, 10, qsgmii) - SWITCH_PORT(10, 11, qsgmii) - SWITCH_PORT(11, 12, qsgmii) - SWITCH_PORT(12, 13, qsgmii) - SWITCH_PORT(13, 14, qsgmii) - SWITCH_PORT(14, 15, qsgmii) - SWITCH_PORT(15, 16, qsgmii) - - SWITCH_PORT(16, 17, qsgmii) - SWITCH_PORT(17, 18, qsgmii) - SWITCH_PORT(18, 19, qsgmii) - SWITCH_PORT(19, 20, qsgmii) - SWITCH_PORT(20, 21, qsgmii) - SWITCH_PORT(21, 22, qsgmii) - SWITCH_PORT(22, 23, qsgmii) - SWITCH_PORT(23, 24, qsgmii) - - SWITCH_PORT(24, 25, qsgmii) - SWITCH_PORT(25, 26, qsgmii) - SWITCH_PORT(26, 27, qsgmii) - SWITCH_PORT(27, 28, qsgmii) - SWITCH_PORT(28, 29, qsgmii) - SWITCH_PORT(29, 30, qsgmii) - SWITCH_PORT(30, 31, qsgmii) - SWITCH_PORT(31, 32, qsgmii) - - SWITCH_PORT(32, 33, qsgmii) - SWITCH_PORT(33, 34, qsgmii) - SWITCH_PORT(34, 35, qsgmii) - SWITCH_PORT(35, 36, qsgmii) - SWITCH_PORT(36, 37, qsgmii) - SWITCH_PORT(37, 38, qsgmii) - SWITCH_PORT(38, 39, qsgmii) - SWITCH_PORT(39, 40, qsgmii) - - SWITCH_PORT(40, 41, qsgmii) - SWITCH_PORT(41, 42, qsgmii) - SWITCH_PORT(42, 43, qsgmii) - SWITCH_PORT(43, 44, qsgmii) - SWITCH_PORT(44, 45, qsgmii) - SWITCH_PORT(45, 46, qsgmii) - SWITCH_PORT(46, 47, qsgmii) - SWITCH_PORT(47, 48, qsgmii) - - /* SFP cages */ - port@48 { - reg = <48>; - label = "lan49"; - phy-mode = "sgmii"; - phy-handle = <&phy48>; - sfp = <&sfp0>; - - fixed-link { - speed = <1000>; - full-duplex; - pause; - }; - - }; - - port@49 { - reg = <49>; - label = "lan50"; - phy-mode = "sgmii"; - phy-handle = <&phy49>; - sfp = <&sfp1>; - - fixed-link { - speed = <1000>; - full-duplex; - pause; - }; - - }; - - /* CPU-Port */ - port@52 { - ethernet = <ðernet0>; - reg = <52>; - phy-mode = "qsgmii"; - fixed-link { - speed = <1000>; - full-duplex; - }; - }; - }; -}; diff --git a/target/linux/realtek/dts-5.15/rtl839x.dtsi b/target/linux/realtek/dts-5.15/rtl839x.dtsi deleted file mode 100644 index 3f87f5622e..0000000000 --- a/target/linux/realtek/dts-5.15/rtl839x.dtsi +++ /dev/null @@ -1,325 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later OR MIT - -#include - -/dts-v1/; - -#define STRINGIZE(s) #s -#define LAN_LABEL(p, s) STRINGIZE(p ## s) -#define SWITCH_PORT_LABEL(n) LAN_LABEL(lan, n) - -#define INTERNAL_PHY(n) \ - phy##n: ethernet-phy@##n { \ - reg = <##n>; \ - compatible = "ethernet-phy-ieee802.3-c22"; \ - phy-is-integrated; \ - }; - -#define EXTERNAL_PHY(n) \ - phy##n: ethernet-phy@##n { \ - reg = <##n>; \ - compatible = "ethernet-phy-ieee802.3-c22"; \ - }; - -#define EXTERNAL_SFP_PHY(n) \ - phy##n: ethernet-phy@##n { \ - compatible = "ethernet-phy-ieee802.3-c22"; \ - sfp; \ - media = "fibre"; \ - reg = <##n>; \ - }; - -#define EXTERNAL_SFP_PHY_FULL(n, s) \ - phy##n: ethernet-phy@##n { \ - compatible = "ethernet-phy-ieee802.3-c22"; \ - sfp = <&sfp##s>; \ - reg = <##n>; \ - }; - -#define SWITCH_PORT(n, s, m) \ - port@##n { \ - reg = <##n>; \ - label = SWITCH_PORT_LABEL(s) ; \ - phy-handle = <&phy##n>; \ - phy-mode = #m ; \ - }; - -#define SWITCH_SFP_PORT(n, s, m) \ - port@##n { \ - reg = <##n>; \ - label = SWITCH_PORT_LABEL(s) ; \ - phy-handle = <&phy##n>; \ - phy-mode = #m ; \ - fixed-link { \ - speed = <1000>; \ - full-duplex; \ - }; \ - }; - -/ { - #address-cells = <1>; - #size-cells = <1>; - - compatible = "realtek,rtl839x-soc"; - - osc: oscillator { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <25000000>; - }; - - ccu: clock-controller { - compatible = "realtek,rtl8390-clock"; - #clock-cells = <1>; - clocks = <&osc>; - clock-names = "ref_clk"; - }; - - cpus { - #address-cells = <1>; - #size-cells = <0>; - - cpu@0 { - compatible = "mips,mips34Kc"; - reg = <0>; - clocks = <&ccu CLK_CPU>; - operating-points-v2 = <&cpu_opp_table>; - }; - - cpu@1 { - compatible = "mips,mips34Kc"; - reg = <1>; - clocks = <&ccu CLK_CPU>; - operating-points-v2 = <&cpu_opp_table>; - }; - }; - - cpu_opp_table: opp-table-0 { - compatible = "operating-points-v2"; - opp-shared; - - opp00 { - opp-hz = /bits/ 64 <425000000>; - }; - opp01 { - opp-hz = /bits/ 64 <450000000>; - }; - opp02 { - opp-hz = /bits/ 64 <475000000>; - }; - opp03 { - opp-hz = /bits/ 64 <500000000>; - }; - opp04 { - opp-hz = /bits/ 64 <525000000>; - }; - opp05 { - opp-hz = /bits/ 64 <550000000>; - }; - opp06 { - opp-hz = /bits/ 64 <575000000>; - }; - opp07 { - opp-hz = /bits/ 64 <600000000>; - }; - opp08 { - opp-hz = /bits/ 64 <625000000>; - }; - opp09 { - opp-hz = /bits/ 64 <650000000>; - }; - opp10 { - opp-hz = /bits/ 64 <675000000>; - }; - opp11 { - opp-hz = /bits/ 64 <700000000>; - }; - opp12 { - opp-hz = /bits/ 64 <725000000>; - }; - opp13 { - opp-hz = /bits/ 64 <750000000>; - }; - }; - - aliases { - serial0 = &uart0; - serial1 = &uart1; - }; - - chosen { - bootargs = "earlycon"; - stdout-path = "serial0:115200n8"; - }; - - cpuintc: cpuintc { - compatible = "mti,cpu-interrupt-controller"; - #address-cells = <0>; - #interrupt-cells = <1>; - interrupt-controller; - }; - - soc: soc { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0x0 0x18000000 0x10000>; - - intc: interrupt-controller@3000 { - compatible = "realtek,rtl8390-intc", "realtek,rtl-intc"; - reg = <0x3000 0x18>, <0x3018 0x18>; - interrupt-controller; - #interrupt-cells = <2>; - - interrupt-parent = <&cpuintc>; - interrupts = <2>, <3>, <4>, <5>, <6>; - }; - - spi0: spi@1200 { - compatible = "realtek,rtl8380-spi"; - reg = <0x1200 0x100>; - - #address-cells = <1>; - #size-cells = <0>; - }; - - timer0: timer@3100 { - compatible = "realtek,rtl8390-timer", "realtek,otto-timer"; - reg = <0x3100 0x10>, <0x3110 0x10>, <0x3120 0x10>, - <0x3130 0x10>, <0x3140 0x10>; - - interrupt-parent = <&intc>; - interrupts = <29 4>, <28 4>, <17 4>, <16 4>, <15 4>; - clocks = <&ccu CLK_LXB>; - }; - - uart0: uart@2000 { - compatible = "ns16550a"; - reg = <0x2000 0x100>; - - clocks = <&ccu CLK_LXB>; - - interrupt-parent = <&intc>; - interrupts = <31 1>; - - reg-io-width = <1>; - reg-shift = <2>; - fifo-size = <1>; - no-loopback-test; - }; - - uart1: uart@2100 { - pinctrl-names = "default"; - pinctrl-0 = <&enable_uart1>; - - compatible = "ns16550a"; - reg = <0x2100 0x100>; - - clocks = <&ccu CLK_LXB>; - - interrupt-parent = <&intc>; - interrupts = <30 2>; - - reg-io-width = <1>; - reg-shift = <2>; - fifo-size = <1>; - no-loopback-test; - - status = "disabled"; - }; - - gpio0: gpio-controller@3500 { - compatible = "realtek,rtl8390-gpio", "realtek,otto-gpio"; - reg = <0x3500 0x20>; - - gpio-controller; - #gpio-cells = <2>; - ngpios = <24>; - - interrupt-controller; - #interrupt-cells = <2>; - interrupt-parent = <&intc>; - interrupts = <23 2>; - }; - - watchdog0: watchdog@3150 { - compatible = "realtek,rtl8390-wdt"; - reg = <0x3150 0xc>; - - realtek,reset-mode = "soc"; - - clocks = <&ccu CLK_LXB>; - timeout-sec = <30>; - - interrupt-parent = <&intc>; - interrupt-names = "phase1", "phase2"; - interrupts = <19 4>, <18 4>; - }; - - }; - - pinmux@1b000004 { - compatible = "pinctrl-single"; - reg = <0x1b000004 0x4>; - - pinctrl-single,bit-per-mux; - pinctrl-single,register-width = <32>; - pinctrl-single,function-mask = <0x1>; - #pinctrl-cells = <2>; - - enable_uart1: pinmux_enable_uart1 { - pinctrl-single,bits = <0x0 0x1 0x3>; - }; - - disable_jtag: pinmux_disable_jtag { - pinctrl-single,bits = <0x0 0x2 0x3>; - }; - }; - - /* LED_GLB_CTRL */ - pinmux@1b0000e4 { - compatible = "pinctrl-single"; - reg = <0x1b0000e4 0x4>; - - pinctrl-single,bit-per-mux; - pinctrl-single,register-width = <32>; - pinctrl-single,function-mask = <0x1>; - #pinctrl-cells = <2>; - - /* enable GPIO 0 */ - pinmux_disable_sys_led: disable_sys_led { - pinctrl-single,bits = <0x0 0x0 0x4000>; - }; - }; - - ethernet0: ethernet@1b00a300 { - compatible = "realtek,rtl838x-eth"; - reg = <0x1b00a300 0x100>; - - interrupt-parent = <&intc>; - interrupts = <24 3>; - - phy-mode = "internal"; - - fixed-link { - speed = <1000>; - full-duplex; - }; - }; - - sram0: sram@9f000000 { - compatible = "mmio-sram"; - reg = <0x9f000000 0x18000>; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0 0x9f000000 0x18000>; - }; - - switch0: switch@1b000000 { - status = "okay"; - compatible = "realtek,rtl83xx-switch"; - - interrupt-parent = <&intc>; - interrupts = <20 2>; - }; -}; diff --git a/target/linux/realtek/dts-5.15/rtl839x_d-link_dgs-1210_gpio.dtsi b/target/linux/realtek/dts-5.15/rtl839x_d-link_dgs-1210_gpio.dtsi deleted file mode 100644 index 260ab67ef3..0000000000 --- a/target/linux/realtek/dts-5.15/rtl839x_d-link_dgs-1210_gpio.dtsi +++ /dev/null @@ -1,75 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later OR MIT - -/ { - /* Lan 49 */ - i2c0: i2c-gpio-0 { - compatible = "i2c-gpio"; - sda-gpios = <&gpio1 6 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; - scl-gpios = <&gpio1 7 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; - i2c-gpio,delay-us = <2>; - #address-cells = <1>; - #size-cells = <0>; - }; - - sfp0: sfp-p49 { - compatible = "sff,sfp"; - i2c-bus = <&i2c0>; - los-gpio = <&gpio1 9 GPIO_ACTIVE_HIGH>; - mod-def0-gpio = <&gpio1 8 GPIO_ACTIVE_LOW>; - /* tx-disable-gpio handled by RTL8214FC based on media setting */ - }; - - /* Lan 50 */ - i2c1: i2c-gpio-1 { - compatible = "i2c-gpio"; - sda-gpios = <&gpio1 1 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; - scl-gpios = <&gpio1 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; - i2c-gpio,delay-us = <2>; - #address-cells = <1>; - #size-cells = <0>; - }; - - sfp1: sfp-p50 { - compatible = "sff,sfp"; - i2c-bus = <&i2c1>; - los-gpio = <&gpio1 4 GPIO_ACTIVE_HIGH>; - mod-def0-gpio = <&gpio1 3 GPIO_ACTIVE_LOW>; - /* tx-disable-gpio handled by RTL8214FC based on media setting */ - }; - - /* Lan 51 */ - i2c2: i2c-gpio-2 { - compatible = "i2c-gpio"; - sda-gpios = <&gpio1 22 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; - scl-gpios = <&gpio1 23 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; - i2c-gpio,delay-us = <2>; - #address-cells = <1>; - #size-cells = <0>; - }; - - sfp2: sfp-p51 { - compatible = "sff,sfp"; - i2c-bus = <&i2c2>; - los-gpio = <&gpio1 25 GPIO_ACTIVE_HIGH>; - mod-def0-gpio = <&gpio1 24 GPIO_ACTIVE_LOW>; - /* tx-disable-gpio handled by RTL8214FC based on media setting */ - }; - - /* Lan 52 */ - i2c3: i2c-gpio-3 { - compatible = "i2c-gpio"; - sda-gpios = <&gpio1 11 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; - scl-gpios = <&gpio1 12 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; - i2c-gpio,delay-us = <2>; - #address-cells = <1>; - #size-cells = <0>; - }; - - sfp3: sfp-p52 { - compatible = "sff,sfp"; - i2c-bus = <&i2c3>; - los-gpio = <&gpio1 14 GPIO_ACTIVE_HIGH>; - mod-def0-gpio = <&gpio1 13 GPIO_ACTIVE_LOW>; - /* tx-disable-gpio handled by RTL8214FC based on media setting */ - }; -}; diff --git a/target/linux/realtek/dts-5.15/rtl83xx_d-link_dgs-1210_common.dtsi b/target/linux/realtek/dts-5.15/rtl83xx_d-link_dgs-1210_common.dtsi deleted file mode 100644 index fa623d7a90..0000000000 --- a/target/linux/realtek/dts-5.15/rtl83xx_d-link_dgs-1210_common.dtsi +++ /dev/null @@ -1,85 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later OR MIT - -#include -#include -#include - -/ { - aliases { - led-boot = &led_power; - led-failsafe = &led_power; - led-running = &led_power; - led-upgrade = &led_power; - }; - - memory@0 { - device_type = "memory"; - reg = <0x0 0x8000000>; - }; - - leds: leds { - pinctrl-names = "default"; - pinctrl-0 = <&pinmux_disable_sys_led>; - compatible = "gpio-leds"; - - led_power: power { - function = LED_FUNCTION_POWER; - color = ; - gpios = <&gpio0 0 GPIO_ACTIVE_LOW>; - }; - }; -}; - -&gpio0 { - indirect-access-bus-id = <0>; -}; - -&spi0 { - status = "okay"; - flash@0 { - compatible = "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <10000000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "u-boot"; - reg = <0x00000000 0x80000>; - read-only; - }; - partition@80000 { - label = "u-boot-env"; - reg = <0x00080000 0x40000>; - }; - partition@c0000 { - label = "board-name"; - reg = <0x000c0000 0x40000>; - }; - partition@280000 { - label = "firmware"; - compatible = "denx,uimage"; - reg = <0x00100000 0xd80000>; - }; - partition@be80000 { - label = "kernel2"; - reg = <0x00e80000 0x180000>; - }; - partition@1000000 { - label = "sysinfo"; - reg = <0x01000000 0x40000>; - }; - partition@1040000 { - label = "rootfs2"; - reg = <0x01040000 0xc00000>; - }; - partition@1c40000 { - label = "jffs2"; - reg = <0x01c40000 0x3c0000>; - }; - }; - }; -}; diff --git a/target/linux/realtek/dts-5.15/rtl83xx_d-link_dgs-1210_gpio.dtsi b/target/linux/realtek/dts-5.15/rtl83xx_d-link_dgs-1210_gpio.dtsi deleted file mode 100644 index b1477aa182..0000000000 --- a/target/linux/realtek/dts-5.15/rtl83xx_d-link_dgs-1210_gpio.dtsi +++ /dev/null @@ -1,27 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later OR MIT - -/ { - gpio-restart { - compatible = "gpio-restart"; - gpios = <&gpio1 34 GPIO_ACTIVE_LOW>; - open-source; - }; - - keys: keys { - compatible = "gpio-keys-polled"; - poll-interval = <20>; - - reset { - label = "reset"; - gpios = <&gpio1 33 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - }; - - gpio1: rtl8231-gpio { - compatible = "realtek,rtl8231-gpio"; - #gpio-cells = <2>; - gpio-controller; - indirect-access-bus-id = <0>; - }; -}; diff --git a/target/linux/realtek/dts-5.15/rtl83xx_panasonic_mxxeg-pn28xx0k.dtsi b/target/linux/realtek/dts-5.15/rtl83xx_panasonic_mxxeg-pn28xx0k.dtsi deleted file mode 100644 index c08034b958..0000000000 --- a/target/linux/realtek/dts-5.15/rtl83xx_panasonic_mxxeg-pn28xx0k.dtsi +++ /dev/null @@ -1,191 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later OR MIT - -#include -#include -#include - -/ { - chosen { - stdout-path = "serial0:9600n8"; - }; - - memory@0 { - device_type = "memory"; - reg = <0x0 0x8000000>; - }; - - leds: leds { - compatible = "gpio-leds"; - - led-0 { - gpios = <&gpio2 0 GPIO_ACTIVE_LOW>; - color = ; - function = LED_FUNCTION_FAULT; - }; - - led-1 { - gpios = <&gpio2 8 GPIO_ACTIVE_LOW>; - color = ; - function = LED_FUNCTION_INDICATOR; - function-enumerator = <1>; - }; - - led-2 { - gpios = <&gpio2 9 GPIO_ACTIVE_LOW>; - color = ; - function = LED_FUNCTION_INDICATOR; - function-enumerator = <2>; - }; - - led-3 { - gpios = <&gpio2 10 GPIO_ACTIVE_LOW>; - color = ; - function = LED_FUNCTION_INDICATOR; - function-enumerator = <3>; - }; - - led-4 { - gpios = <&gpio2 11 GPIO_ACTIVE_LOW>; - color = ; - function = LED_FUNCTION_INDICATOR; - function-enumerator = <4>; - }; - }; - - keys { - compatible = "gpio-keys"; - - led_mode { - label = "led-mode"; - gpios = <&gpio2 15 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - }; - - gpio-restart { - compatible = "gpio-restart"; - gpios = <&gpio2 3 GPIO_ACTIVE_HIGH>; - }; - - i2c_gpio_0: i2c-gpio-0 { - compatible = "i2c-gpio"; - i2c-gpio,delay-us = <2>; - #address-cells = <1>; - #size-cells = <0>; - - gpio1: gpio@20 { - compatible = "nxp,pca9555"; - reg = <0x20>; - gpio-controller; - #gpio-cells = <2>; - }; - - gpio2: gpio@75 { - compatible = "nxp,pca9539"; - reg = <0x75>; - gpio-controller; - #gpio-cells = <2>; - - /* - * GPIO14 (IO1_6): Shift Register RESET (port LED) - * - Switch-M8eG PN28080K: 3x 74HC164 - * - Switch-M16eG PN28160K: 4x 74HC164 - * - Switch-M24eG PN28240K: 6x 74HC164 - * - Switch-M48eG PN28480K: 12x 74HC164 - */ - portled_sregister_reset { - gpio-hog; - gpios = <14 GPIO_ACTIVE_HIGH>; - output-high; - line-name = "portled-sregister-reset"; - }; - }; - }; - - i2c_gpio_1: i2c-gpio-1 { - compatible = "i2c-gpio"; - i2c-gpio,delay-us = <2>; - #address-cells = <1>; - #size-cells = <0>; - - i2c_switch: i2c-switch@70 { - compatible = "nxp,pca9545"; - reset-gpios = <&gpio2 13 GPIO_ACTIVE_LOW>; - reg = <0x70>; - #address-cells = <1>; - #size-cells = <0>; - }; - }; -}; - -&spi0 { - status = "okay"; - - flash@0 { - compatible = "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <10000000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "u-boot"; - reg = <0x0 0x80000>; - read-only; - }; - - partition@80000 { - label = "u-boot-env"; - reg = <0x80000 0x10000>; - }; - - partition@90000 { - label = "u-boot-env2"; - reg = <0x90000 0x10000>; - }; - - partition@a0000 { - label = "sysinfo"; - reg = <0xa0000 0x60000>; - read-only; - }; - - /* - * Filesystem area in stock firmware - * (0x100000-0x1DFFFFF) - * - * stock firmware images are required to pass - * the checking by the U-Boot, also for OpenWrt - * - * in OpenWrt: - * - 0x100000-0xDFFFFF (13M): stock images - * - 0xE00000-0x1DFFFFF(16M): OpenWrt image - */ - partition@100000 { - label = "fs_reserved"; - reg = <0x100000 0xd00000>; - }; - - partition@e00000 { - compatible = "denx,uimage"; - label = "firmware"; - reg = <0xe00000 0x1000000>; - }; - - partition@1e00000 { - label = "vlog_data"; - reg = <0x1e00000 0x100000>; - read-only; - }; - - partition@1f00000 { - label = "elog_data"; - reg = <0x1f00000 0x100000>; - read-only; - }; - }; - }; -}; diff --git a/target/linux/realtek/dts-5.15/rtl9302_zyxel_xgs1250-12.dts b/target/linux/realtek/dts-5.15/rtl9302_zyxel_xgs1250-12.dts deleted file mode 100644 index 0c35d7b004..0000000000 --- a/target/linux/realtek/dts-5.15/rtl9302_zyxel_xgs1250-12.dts +++ /dev/null @@ -1,424 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/dts-v1/; - -#include "rtl930x.dtsi" - -#include -#include -#include -#include - -/ { - compatible = "zyxel,xgs1250-12", "realtek,rtl838x-soc"; - model = "Zyxel XGS1250-12 Switch"; - - aliases { - led-boot = &led_pwr_sys; - led-failsafe = &led_pwr_sys; - led-running = &led_pwr_sys; - led-upgrade = &led_pwr_sys; - }; - - keys { - compatible = "gpio-keys"; - - mode { - label = "reset"; - gpios = <&gpio0 22 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - }; - - /* i2c of the SFP cage: port 12 */ - i2c0: i2c-rtl9300@1b00036c { - compatible = "realtek,rtl9300-i2c"; - reg = <0x1b00036c 0x3c>; - #address-cells = <1>; - #size-cells = <0>; - sda-pin = <10>; - scl-pin = <8>; - clock-frequency = <100000>; - }; - - leds { - compatible = "gpio-leds"; - - pinctrl-names = "default"; - pinctrl-0 = <&pinmux_disable_sys_led>; - - led_pwr_sys: led-0 { - color = ; - function = LED_FUNCTION_POWER; - gpios = <&gpio0 0 GPIO_ACTIVE_HIGH>; - }; - }; - - sfp0: sfp-p12 { - compatible = "sff,sfp"; - i2c-bus = <&i2c0>; - los-gpio = <&gpio0 17 GPIO_ACTIVE_HIGH>; - tx-fault-gpio = <&gpio0 20 GPIO_ACTIVE_HIGH>; - mod-def0-gpio = <&gpio0 16 GPIO_ACTIVE_LOW>; - tx-disable-gpio = <&gpio0 15 GPIO_ACTIVE_HIGH>; - }; - - led_set: led_set { - compatible = "realtek,rtl9300-leds"; - active-low; - - led_set0 = <0x0a20 0x0b80>; // LED set 0: 1000Mbps, 10/100Mbps - led_set1 = <0x0a0b 0x0a28 0x0a82 0x0a0b>; // LED set 1: (10G, 5G, 2.5G) (2.5G, 1G) - // (5G, 10/100) (10G, 5G, 2.5G) - led_set2 = <0x0a20 0x0a01>; // LED set 2: 1000MBit, 10GBit - }; - - thermal-zones { - phy24-thermal { - /* Poll every 10 seconds */ - polling-delay-passive = <10000>; - polling-delay = <10000>; - thermal-sensors = <&phy24>; - - trips { - phy24_trip0: phy24-trip0 { - /* At 80 degrees turn on fan */ - temperature = <80000>; - hysteresis = <1000>; - type = "active"; - }; - - phy24_trip1: phy24-trip1 { - /* At 108 degrees phys exceed spec */ - temperature = <108000>; - hysteresis = <5000>; - type = "critical"; - }; - }; - - cooling-maps { - map { - trip = <&phy24_trip0>; - cooling-device = <&chassis_fan THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; - }; - }; - }; - - phy25-thermal { - /* Poll every 10 seconds */ - polling-delay-passive = <10000>; - polling-delay = <10000>; - thermal-sensors = <&phy25>; - - trips { - phy25_trip0: phy25-trip0 { - /* At 80 degrees turn on fan */ - temperature = <80000>; - hysteresis = <1000>; - type = "active"; - }; - - phy25_trip1: phy25-trip1 { - /* At 108 degrees phys exceed spec */ - temperature = <108000>; - hysteresis = <5000>; - type = "critical"; - }; - }; - - cooling-maps { - map { - trip = <&phy25_trip0>; - cooling-device = <&chassis_fan THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; - }; - }; - }; - - phy26-thermal { - /* Poll every 10 seconds */ - polling-delay-passive = <10000>; - polling-delay = <10000>; - thermal-sensors = <&phy26>; - - trips { - phy26_trip0: phy26-trip0 { - /* At 80 degrees turn on fan */ - temperature = <80000>; - hysteresis = <1000>; - type = "active"; - }; - - phy26_trip1: phy26-trip1 { - /* At 108 degrees phys exceed spec */ - temperature = <108000>; - hysteresis = <5000>; - type = "critical"; - }; - }; - - cooling-maps { - map { - trip = <&phy26_trip0>; - cooling-device = <&chassis_fan THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; - }; - }; - }; - }; - - /* YEN SUN TECHNOLOGY FD122510LL-N fan */ - chassis_fan: gpio-fan { - compatible = "gpio-fan"; - gpios = <&gpio0 11 GPIO_ACTIVE_HIGH>; - gpio-fan,speed-map = <0 0 - 7000 1>; - #cooling-cells = <2>; - }; -}; - -&spi0 { - status = "okay"; - flash@0 { - compatible = "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <10000000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "u-boot"; - reg = <0x0 0xe0000>; - read-only; - }; - partition@e0000 { - label = "u-boot-env"; - reg = <0xe0000 0x10000>; - }; - partition@f0000 { - label = "u-boot-env2"; - reg = <0xf0000 0x10000>; - read-only; - }; - partition@100000 { - label = "jffs"; - reg = <0x100000 0x100000>; - }; - partition@200000 { - label = "jffs2"; - reg = <0x200000 0x100000>; - }; - partition@b300000 { - label = "firmware"; - reg = <0x300000 0xce0000>; - compatible = "openwrt,uimage", "denx,uimage"; - openwrt,ih-magic = <0x93001250>; - }; - partition@fe0000 { - label = "log"; - reg = <0xfe0000 0x20000>; - }; - }; - }; -}; - -ðernet0 { - mdio: mdio-bus { - compatible = "realtek,rtl838x-mdio"; - regmap = <ðernet0>; - #address-cells = <1>; - #size-cells = <0>; - - /* External RTL8218D PHY */ - phy0: ethernet-phy@0 { - reg = <0>; - compatible = "ethernet-phy-ieee802.3-c22"; - rtl9300,smi-address = <0 0>; - sds = < 2 >; - // Disabled because we do not know how to bring up again - // reset-gpios = <&gpio0 21 GPIO_ACTIVE_LOW>; - }; - phy1: ethernet-phy@1 { - reg = <1>; - compatible = "ethernet-phy-ieee802.3-c22"; - rtl9300,smi-address = <0 1>; - }; - phy2: ethernet-phy@2 { - reg = <2>; - compatible = "ethernet-phy-ieee802.3-c22"; - rtl9300,smi-address = <0 2>; - }; - phy3: ethernet-phy@3 { - reg = <3>; - compatible = "ethernet-phy-ieee802.3-c22"; - rtl9300,smi-address = <0 3>; - }; - phy4: ethernet-phy@4 { - reg = <4>; - compatible = "ethernet-phy-ieee802.3-c22"; - rtl9300,smi-address = <0 4>; - }; - phy5: ethernet-phy@5 { - reg = <5>; - compatible = "ethernet-phy-ieee802.3-c22"; - rtl9300,smi-address = <0 5>; - }; - phy6: ethernet-phy@6 { - reg = <6>; - compatible = "ethernet-phy-ieee802.3-c22"; - rtl9300,smi-address = <0 6>; - }; - phy7: ethernet-phy@7 { - reg = <7>; - compatible = "ethernet-phy-ieee802.3-c22"; - rtl9300,smi-address = <0 7>; - }; - - /* External Aquantia 113C PHYs */ - phy24: ethernet-phy@24 { - reg = <24>; - compatible = "ethernet-phy-ieee802.3-c45"; - rtl9300,smi-address = <1 8>; - sds = < 6 >; - // Disabled because we do not know how to bring up again - // reset-gpios = <&gpio0 21 GPIO_ACTIVE_LOW>; - #thermal-sensor-cells = <0>; - }; - - phy25: ethernet-phy@25 { - reg = <25>; - compatible = "ethernet-phy-ieee802.3-c45"; - rtl9300,smi-address = <2 8>; - sds = < 7 >; - // Disabled because we do not know how to bring up again - // reset-gpios = <&gpio0 21 GPIO_ACTIVE_LOW>; - #thermal-sensor-cells = <0>; - }; - - phy26: ethernet-phy@26 { - reg = <26>; - compatible = "ethernet-phy-ieee802.3-c45"; - rtl9300,smi-address = <3 8>; - sds = < 8 >; - // Disabled because we do not know how to bring up again - // reset-gpios = <&gpio0 21 GPIO_ACTIVE_LOW>; - #thermal-sensor-cells = <0>; - }; - - /* SFP Ports */ - phy27: ethernet-phy@27 { - compatible = "ethernet-phy-ieee802.3-c22"; - phy-is-integrated; - reg = <27>; - rtl9300,smi-address = <4 0>; - sds = < 9 >; - }; - - }; -}; - -&switch0 { - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - label = "lan1"; - phy-handle = <&phy0>; - phy-mode = "xgmii"; - led-set = <0>; - }; - port@1 { - reg = <1>; - label = "lan2"; - phy-handle = <&phy1>; - phy-mode = "xgmii"; - led-set = <0>; - }; - port@2 { - reg = <2>; - label = "lan3"; - phy-handle = <&phy2>; - phy-mode = "xgmii"; - led-set = <0>; - }; - port@3 { - reg = <3>; - label = "lan4"; - phy-handle = <&phy3>; - phy-mode = "xgmii"; - led-set = <0>; - }; - port@4 { - reg = <4>; - label = "lan5"; - phy-handle = <&phy4>; - phy-mode = "xgmii"; - led-set = <0>; - }; - port@5 { - reg = <5>; - label = "lan6"; - phy-handle = <&phy5>; - phy-mode = "xgmii"; - led-set = <0>; - }; - port@6 { - reg = <6>; - label = "lan7"; - phy-handle = <&phy6>; - phy-mode = "xgmii"; - led-set = <0>; - }; - port@7 { - reg = <7>; - label = "lan8"; - phy-handle = <&phy7>; - phy-mode = "xgmii"; - led-set = <0>; - }; - - port@24 { - reg = <24>; - label = "lan9"; - phy-mode = "usxgmii"; - phy-handle = <&phy24>; - led-set = <1>; - }; - port@25 { - reg = <25>; - label = "lan10"; - phy-mode = "usxgmii"; - phy-handle = <&phy25>; - led-set = <1>; - }; - port@26 { - reg = <26>; - label = "lan11"; - phy-mode = "usxgmii"; - phy-handle = <&phy26>; - led-set = <1>; - }; - - port@27 { - reg = <27>; - label = "lan12"; - phy-mode = "1000base-x"; - phy-handle = <&phy27>; - sfp = <&sfp0>; - led-set = <2>; - managed = "in-band-status"; - }; - - port@28 { - ethernet = <ðernet0>; - reg = <28>; - phy-mode = "internal"; - fixed-link { - speed = <10000>; - full-duplex; - }; - }; - }; -}; diff --git a/target/linux/realtek/dts-5.15/rtl930x.dtsi b/target/linux/realtek/dts-5.15/rtl930x.dtsi deleted file mode 100644 index 9b0a5781a2..0000000000 --- a/target/linux/realtek/dts-5.15/rtl930x.dtsi +++ /dev/null @@ -1,183 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later OR MIT - -/dts-v1/; - -/ { - #address-cells = <1>; - #size-cells = <1>; - - compatible = "realtek,rtl838x-soc"; - - cpus { - #address-cells = <1>; - #size-cells = <0>; - frequency = <800000000>; - - cpu@0 { - compatible = "mips,mips34Kc"; - reg = <0>; - }; - }; - - memory@0 { - device_type = "memory"; - reg = <0x0 0x8000000>; - }; - - aliases { - serial0 = &uart0; - serial1 = &uart1; - }; - - chosen { - bootargs = "earlycon"; - stdout-path = "serial0:115200n8"; - }; - - cpuintc: cpuintc { - compatible = "mti,cpu-interrupt-controller"; - #address-cells = <0>; - #interrupt-cells = <1>; - interrupt-controller; - }; - - lx_clk: lx_clk { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <175000000>; - }; - - soc: soc { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0x0 0x18000000 0x10000>; - - intc: interrupt-controller@3000 { - compatible = "realtek,rtl9300-intc", "realtek,rtl-intc"; - reg = <0x3000 0x18>, <0x3018 0x18>; - interrupt-controller; - #interrupt-cells = <2>; - - interrupt-parent = <&cpuintc>; - interrupts = <2>, <3>, <4>, <5>, <6>, <7>; - }; - - spi0: spi@1200 { - compatible = "realtek,rtl8380-spi"; - reg = <0x1200 0x100>; - - #address-cells = <1>; - #size-cells = <0>; - }; - - timer0: timer@3200 { - compatible = "realtek,rtl930x-timer", "realtek,otto-timer"; - reg = <0x3200 0x10>, <0x3210 0x10>, <0x3220 0x10>, - <0x3230 0x10>, <0x3240 0x10>; - - interrupt-parent = <&intc>; - interrupts = <7 4>, <8 4>, <9 4>, <10 4>, <11 4>; - clocks = <&lx_clk>; - }; - - uart0: uart@2000 { - compatible = "ns16550a"; - reg = <0x2000 0x100>; - - clocks = <&lx_clk>; - - interrupt-parent = <&intc>; - interrupts = <30 1>; - - reg-io-width = <1>; - reg-shift = <2>; - fifo-size = <1>; - no-loopback-test; - }; - - uart1: uart@2100 { - compatible = "ns16550a"; - reg = <0x2100 0x100>; - - clocks = <&lx_clk>; - - interrupt-parent = <&intc>; - interrupts = <31 0>; - - reg-io-width = <1>; - reg-shift = <2>; - fifo-size = <1>; - no-loopback-test; - - status = "disabled"; - }; - - watchdog0: watchdog@3260 { - compatible = "realtek,rtl9300-wdt"; - reg = <0x3260 0xc>; - - realtek,reset-mode = "soc"; - - clocks = <&lx_clk>; - timeout-sec = <30>; - - interrupt-parent = <&intc>; - interrupt-names = "phase1", "phase2"; - interrupts = <5 4>, <6 4>; - }; - - gpio0: gpio-controller@3300 { - compatible = "realtek,rtl9300-gpio", "realtek,otto-gpio"; - reg = <0x3300 0x1c>, <0x3338 0x8>; - - gpio-controller; - #gpio-cells = <2>; - ngpios = <24>; - - interrupt-controller; - #interrupt-cells = <2>; - interrupt-parent = <&intc>; - interrupts = <13 1>; - }; - - }; - - pinmux_led: pinmux@1b00cc00 { - compatible = "pinctrl-single"; - reg = <0x1b00cc00 0x4>; - - pinctrl-single,bit-per-mux; - pinctrl-single,register-width = <32>; - pinctrl-single,function-mask = <0x1>; - #pinctrl-cells = <2>; - - /* enable GPIO 0 */ - pinmux_disable_sys_led: disable_sys_led { - pinctrl-single,bits = <0x0 0x0 0x1000>; - }; - }; - - ethernet0: ethernet@1b00a300 { - compatible = "realtek,rtl838x-eth"; - reg = <0x1b00a300 0x100>; - - interrupt-parent = <&intc>; - interrupts = <24 3>; - - phy-mode = "internal"; - - fixed-link { - speed = <1000>; - full-duplex; - }; - }; - - switch0: switch@1b000000 { - compatible = "realtek,rtl83xx-switch"; - status = "okay"; - - interrupt-parent = <&intc>; - interrupts = <23 2>; - }; -}; diff --git a/target/linux/realtek/dts-5.15/rtl931x.dtsi b/target/linux/realtek/dts-5.15/rtl931x.dtsi deleted file mode 100644 index 61599e89b5..0000000000 --- a/target/linux/realtek/dts-5.15/rtl931x.dtsi +++ /dev/null @@ -1,206 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later OR MIT - -#include - -/ { - #address-cells = <1>; - #size-cells = <1>; - - compatible = "realtek,rtl838x-soc"; - - cpus { - #address-cells = <1>; - #size-cells = <0>; - frequency = <1000000000>; - - cpu@0 { - compatible = "mti,interaptive"; - reg = <0>; - }; - - cpu@1 { - compatible = "mti,interaptive"; - reg = <1>; - }; - }; - - memory@0 { - device_type = "memory"; - reg = <0x0 0x10000000>; - }; - - aliases { - serial0 = &uart0; - serial1 = &uart1; - }; - - chosen { - bootargs = "earlycon"; - stdout-path = "serial0:115200n8"; - }; - - lx_clk: lx_clk { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <200000000>; - }; - - cpuclock: cpuclock@0 { - #clock-cells = <0>; - compatible = "fixed-clock"; - - /* FIXME: there should be way to detect this */ - clock-frequency = <1000000000>; - }; - - cpuintc: cpuintc { - compatible = "mti,cpu-interrupt-controller"; - #address-cells = <0>; - #interrupt-cells = <1>; - interrupt-controller; - }; - - gic: interrupt-controller@1ddc0000 { - compatible = "mti,gic"; - reg = <0x1ddc0000 0x20000>; - - interrupt-controller; - #interrupt-cells = <3>; - - /* - * Declare the interrupt-parent even though the mti,gic - * binding doesn't require it, such that the kernel can - * figure out that cpu_intc is the root interrupt - * controller & should be probed first. - */ - interrupt-parent = <&cpuintc>; - - timer { - compatible = "mti,gic-timer"; - interrupts = ; - clocks = <&cpuclock>; - }; - }; - - soc: soc { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0x0 0x18000000 0x10000>; - - spi0: spi@1200 { - status = "okay"; - - compatible = "realtek,rtl8380-spi"; - reg = <0x1200 0x100>; - - #address-cells = <1>; - #size-cells = <0>; - }; - - watchdog0: watchdog@3260 { - compatible = "realtek,rtl9310-wdt"; - reg = <0x3260 0xc>; - - realtek,reset-mode = "soc"; - - clocks = <&lx_clk>; - timeout-sec = <30>; - - interrupt-parent = <&gic>; - interrupt-names = "phase1", "phase2"; - interrupts = , ; - }; - - gpio0: gpio-controller@3300 { - compatible = "realtek,rtl9310-gpio", "realtek,otto-gpio"; - reg = <0x3300 0x1c>; - - gpio-controller; - #gpio-cells = <2>; - ngpios = <32>; - - interrupt-controller; - #interrupt-cells = <3>; - interrupt-parent = <&gic>; - interrupts = ; - }; - - uart0: uart@2000 { - compatible = "ns16550a"; - reg = <0x2000 0x100>; - - clock-frequency = <200000000>; - - interrupt-parent = <&gic>; - #interrupt-cells = <3>; - interrupts = ; - - reg-io-width = <1>; - reg-shift = <2>; - fifo-size = <1>; - no-loopback-test; - }; - - uart1: uart@2100 { - compatible = "ns16550a"; - reg = <0x2100 0x100>; - - clock-frequency = <200000000>; - - interrupt-parent = <&gic>; - #interrupt-cells = <3>; - interrupts = ; - - reg-io-width = <1>; - reg-shift = <2>; - fifo-size = <1>; - no-loopback-test; - - status = "disabled"; - }; - }; - - pinmux: pinmux@1b001358 { - compatible = "pinctrl-single"; - reg = <0x1b001358 0x4>; - - pinctrl-single,bit-per-mux; - pinctrl-single,register-width = <32>; - pinctrl-single,function-mask = <0x1>; - #pinctrl-cells = <2>; - - /* Enable GPIO6 and GPIO7, possibly unknown others */ - pinmux_disable_jtag: disable_jtag { - pinctrl-single,bits = <0x0 0x0 0x8000>; - }; - - /* Controls GPIO0 */ - pinmux_disable_sys_led: disable_sys_led { - pinctrl-single,bits = <0x0 0x0 0x100>; - }; - }; - - ethernet0: ethernet@1b00a300 { - status = "okay"; - compatible = "realtek,rtl838x-eth"; - reg = <0x1b00a300 0x100>; - interrupt-parent = <&gic>; - #interrupt-cells = <3>; - interrupts = ; - phy-mode = "internal"; - fixed-link { - speed = <1000>; - full-duplex; - }; - }; - - switch0: switch@1b000000 { - compatible = "realtek,rtl83xx-switch"; - status = "okay"; - - interrupt-parent = <&gic>; - #interrupt-cells = <3>; - interrupts = ; - }; -}; diff --git a/target/linux/realtek/dts/rtl8380_d-link_dgs-1210-10mp-f.dts b/target/linux/realtek/dts/rtl8380_d-link_dgs-1210-10mp-f.dts new file mode 100644 index 0000000000..664cab5999 --- /dev/null +++ b/target/linux/realtek/dts/rtl8380_d-link_dgs-1210-10mp-f.dts @@ -0,0 +1,140 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT + +#include "rtl838x.dtsi" +#include "rtl83xx_d-link_dgs-1210_common.dtsi" +#include "rtl83xx_d-link_dgs-1210_gpio.dtsi" + +/ { + compatible = "d-link,dgs-1210-10mp-f", "realtek,rtl8382-soc", "realtek,rtl838x-soc"; + + model = "D-Link DGS-1210-10MP F"; + + /* i2c for sfp port9 */ + i2c0: i2c-gpio-0 { + compatible = "i2c-gpio"; + sda-gpios = <&gpio1 6 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + scl-gpios = <&gpio1 7 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + i2c-gpio,delay-us = <2>; + #address-cells = <1>; + #size-cells = <0>; + }; + + sfp0: sfp-p9 { + compatible = "sff,sfp"; + i2c-bus = <&i2c0>; + los-gpio = <&gpio1 9 GPIO_ACTIVE_HIGH>; + mod-def0-gpio = <&gpio1 8 GPIO_ACTIVE_LOW>; + tx-disable-gpio = <&gpio1 11 GPIO_ACTIVE_HIGH>; + }; + + /* i2c for sfp port10 */ + i2c1: i2c-gpio-1 { + compatible = "i2c-gpio"; + sda-gpios = <&gpio1 1 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + scl-gpios = <&gpio1 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + i2c-gpio,delay-us = <2>; + #address-cells = <1>; + #size-cells = <0>; + }; + + sfp1: sfp-p10 { + compatible = "sff,sfp"; + i2c-bus = <&i2c1>; + los-gpio = <&gpio1 4 GPIO_ACTIVE_HIGH>; + mod-def0-gpio = <&gpio1 3 GPIO_ACTIVE_LOW>; + tx-disable-gpio = <&gpio1 12 GPIO_ACTIVE_HIGH>; + }; +}; + +&leds { + link_act { + label = "green:link_act"; + gpios = <&gpio1 28 GPIO_ACTIVE_LOW>; + }; + + poe { + label = "green:poe"; + gpios = <&gpio1 29 GPIO_ACTIVE_LOW>; + }; + + poe_max { + label = "yellow:poe_max"; + gpios = <&gpio1 27 GPIO_ACTIVE_LOW>; + }; +}; + +&keys { + mode { + label = "mode"; + gpios = <&gpio1 30 GPIO_ACTIVE_LOW>; + linux,code = ; + }; +}; + +&uart1 { + status = "okay"; +}; + +ðernet0 { + mdio: mdio-bus { + compatible = "realtek,rtl838x-mdio"; + regmap = <ðernet0>; + #address-cells = <1>; + #size-cells = <0>; + + INTERNAL_PHY(8) + INTERNAL_PHY(9) + INTERNAL_PHY(10) + INTERNAL_PHY(11) + INTERNAL_PHY(12) + INTERNAL_PHY(13) + INTERNAL_PHY(14) + INTERNAL_PHY(15) + INTERNAL_PHY(24) + INTERNAL_PHY(26) + }; +}; + +&switch0 { + ports { + #address-cells = <1>; + #size-cells = <0>; + + SWITCH_PORT(8, 1, internal) + SWITCH_PORT(9, 2, internal) + SWITCH_PORT(10, 3, internal) + SWITCH_PORT(11, 4, internal) + SWITCH_PORT(12, 5, internal) + SWITCH_PORT(13, 6, internal) + SWITCH_PORT(14, 7, internal) + SWITCH_PORT(15, 8, internal) + + port@24 { + reg = <24>; + label = "lan9"; + phy-handle = <&phy24>; + phy-mode = "1000base-x"; + managed = "in-band-status"; + sfp = <&sfp0>; + }; + + port@26 { + reg = <26>; + label = "lan10"; + phy-handle = <&phy26>; + phy-mode = "1000base-x"; + managed = "in-band-status"; + sfp = <&sfp1>; + }; + + port@28 { + ethernet = <ðernet0>; + reg = <28>; + phy-mode = "internal"; + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + }; +}; diff --git a/target/linux/realtek/dts/rtl8380_engenius_ews2910p.dts b/target/linux/realtek/dts/rtl8380_engenius_ews2910p.dts new file mode 100644 index 0000000000..289ec86274 --- /dev/null +++ b/target/linux/realtek/dts/rtl8380_engenius_ews2910p.dts @@ -0,0 +1,232 @@ +// SPDX-License-Identifier: GPL-2.0-or-later + +#include "rtl838x.dtsi" + +#include +#include +#include + +/ { + compatible = "engenius,ews2910p", "realtek,rtl838x-soc"; + model = "EnGenius EWS2910P"; + + aliases { + led-boot = &led_power; + led-failsafe = &led_fault; + led-running = &led_power; + led-upgrade = &led_power; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x10000000>; + }; + + keys { + compatible = "gpio-keys"; + + reset { + label = "reset"; + gpios = <&gpio0 11 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + + led_mode { + label = "led-mode"; + gpios = <&gpio0 13 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + }; + + gpio1: rtl8231-gpio { + compatible = "realtek,rtl8231-gpio"; + #gpio-cells = <2>; + gpio-controller; + indirect-access-bus-id = <0>; + + poe_enable { + gpio-hog; + gpios = <1 GPIO_ACTIVE_HIGH>; + output-high; + line-name = "poe-enable"; + }; + + sff_p9_gpios { + gpio-hog; + gpios = < 6 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>, + < 11 GPIO_ACTIVE_HIGH>, /* los-gpio */ + < 12 GPIO_ACTIVE_LOW>; /* mod-def0-gpio */ + input; + line-name = "sff-p9-gpios"; + }; + }; + + gpio-export { + compatible = "gpio-export"; + + sff-p9-tx-disable { + gpio-export,name = "sff-p9-tx-disable"; + gpio-export,output = <1>; + gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>; + }; + }; + + gpio-restart { + compatible = "gpio-restart"; + gpios = <&gpio1 0 GPIO_ACTIVE_LOW>; + }; + + leds { + compatible = "gpio-leds"; + + led_power: led-0 { + function = LED_FUNCTION_POWER; + color = ; + gpios = <&gpio1 3 GPIO_ACTIVE_LOW>; + }; + + led_lan_mode: led-1 { + label = "green:lan-mode"; + gpios = <&gpio1 4 GPIO_ACTIVE_LOW>; + }; + + led_fault: led-2 { + function = LED_FUNCTION_FAULT; + color = ; + gpios = <&gpio1 2 GPIO_ACTIVE_LOW>; + }; + + led_poe_max: led-3 { + label = "amber:poe-max"; + gpios = <&gpio0 12 GPIO_ACTIVE_LOW>; + }; + }; + + i2c1: i2c-gpio-1 { + compatible = "i2c-gpio"; + sda-gpios = <&gpio1 7 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + scl-gpios = <&gpio1 31 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + i2c-gpio,delay-us = <2>; + #address-cells = <1>; + #size-cells = <0>; + }; + sfp1: sfp-p10 { + compatible = "sff,sfp"; + i2c-bus = <&i2c1>; + tx-disable-gpio = <&gpio1 13 GPIO_ACTIVE_HIGH>; + los-gpio = <&gpio1 14 GPIO_ACTIVE_HIGH>; + mod-def0-gpio = <&gpio1 21 GPIO_ACTIVE_LOW>; + }; +}; + +&spi0 { + status = "okay"; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <10000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x80000>; + read-only; + }; + partition@80000 { + label = "u-boot-env"; + reg = <0x80000 0x10000>; + read-only; + }; + partition@90000 { + label = "u-boot-env2"; + reg = <0x90000 0x10000>; + }; + partition@a0000 { + label = "rootfs_data"; + reg = <0xa0000 0xd60000>; + }; + partition@e00000 { + label = "jffs2-log"; + reg = <0xe00000 0x200000>; + }; + partition@1000000 { + compatible = "openwrt,uimage"; + label = "firmware"; + reg = <0x1000000 0x800000>; + openwrt,ih-magic = <0x03802910>; + }; + partition@1800000 { + label = "firmware2"; + reg = <0x1800000 0x800000>; + }; + }; + }; +}; + +ðernet0 { + mdio: mdio-bus { + compatible = "realtek,rtl838x-mdio"; + regmap = <ðernet0>; + #address-cells = <1>; + #size-cells = <0>; + + INTERNAL_PHY(8) + INTERNAL_PHY(9) + INTERNAL_PHY(10) + INTERNAL_PHY(11) + INTERNAL_PHY(12) + INTERNAL_PHY(13) + INTERNAL_PHY(14) + INTERNAL_PHY(15) + + INTERNAL_PHY(24) + INTERNAL_PHY(26) + }; +}; + +&switch0 { + ports { + #address-cells = <1>; + #size-cells = <0>; + + SWITCH_PORT(8, 1, internal) + SWITCH_PORT(9, 2, internal) + SWITCH_PORT(10, 3, internal) + SWITCH_PORT(11, 4, internal) + SWITCH_PORT(12, 5, internal) + SWITCH_PORT(13, 6, internal) + SWITCH_PORT(14, 7, internal) + SWITCH_PORT(15, 8, internal) + + SWITCH_SFP_PORT(24, 9, 1000base-x) + + port@26 { + reg = <26>; + label = "lan10"; + phy-mode = "1000base-x"; + phy-handle = <&phy26>; + managed = "in-band-status"; + sfp = <&sfp1>; + }; + + port@28 { + ethernet = <ðernet0>; + reg = <28>; + phy-mode = "internal"; + + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + }; +}; + +&uart1 { + status = "okay"; +}; diff --git a/target/linux/realtek/dts/rtl8380_hpe_1920-8g-poe-180w.dts b/target/linux/realtek/dts/rtl8380_hpe_1920-8g-poe-180w.dts new file mode 100644 index 0000000000..6398e6d034 --- /dev/null +++ b/target/linux/realtek/dts/rtl8380_hpe_1920-8g-poe-180w.dts @@ -0,0 +1,12 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT + +#include "rtl8380_hpe_1920-8g.dtsi" + +/ { + compatible = "hpe,1920-8g-poe-180w", "realtek,rtl838x-soc"; + model = "HPE 1920-8G-PoE+ 180W (JG922A)"; +}; + +&uart1 { + status = "okay"; +}; diff --git a/target/linux/realtek/dts/rtl8380_hpe_1920-8g-poe-65w.dts b/target/linux/realtek/dts/rtl8380_hpe_1920-8g-poe-65w.dts new file mode 100644 index 0000000000..341f535e93 --- /dev/null +++ b/target/linux/realtek/dts/rtl8380_hpe_1920-8g-poe-65w.dts @@ -0,0 +1,12 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT + +#include "rtl8380_hpe_1920-8g.dtsi" + +/ { + compatible = "hpe,1920-8g-poe-65w", "realtek,rtl838x-soc"; + model = "HPE 1920-8G-PoE+ 65W (JG921A)"; +}; + +&uart1 { + status = "okay"; +}; diff --git a/target/linux/realtek/dts/rtl8380_hpe_1920-8g.dts b/target/linux/realtek/dts/rtl8380_hpe_1920-8g.dts new file mode 100644 index 0000000000..ac95a00c01 --- /dev/null +++ b/target/linux/realtek/dts/rtl8380_hpe_1920-8g.dts @@ -0,0 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT + +#include "rtl8380_hpe_1920-8g.dtsi" + +/ { + compatible = "hpe,1920-8g", "realtek,rtl838x-soc"; + model = "HPE 1920-8G (JG920A)"; +}; diff --git a/target/linux/realtek/dts/rtl8380_hpe_1920-8g.dtsi b/target/linux/realtek/dts/rtl8380_hpe_1920-8g.dtsi new file mode 100644 index 0000000000..58f2c1f6c9 --- /dev/null +++ b/target/linux/realtek/dts/rtl8380_hpe_1920-8g.dtsi @@ -0,0 +1,112 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT + +#include "rtl838x.dtsi" +#include "rtl838x_hpe_1920.dtsi" + +/ { + gpio1: rtl8231-gpio { + compatible = "realtek,rtl8231-gpio"; + #gpio-cells = <2>; + gpio-controller; + indirect-access-bus-id = <0>; + }; + + i2c0: i2c-gpio-0 { + compatible = "i2c-gpio"; + sda-gpios = <&gpio1 23 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + scl-gpios = <&gpio1 24 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + i2c-gpio,delay-us = <2>; + #address-cells = <1>; + #size-cells = <0>; + }; + + sfp0: sfp-0 { + compatible = "sff,sfp"; + i2c-bus = <&i2c0>; + los-gpio = <&gpio1 26 GPIO_ACTIVE_HIGH>; + mod-def0-gpio = <&gpio1 25 GPIO_ACTIVE_LOW>; + // tx-fault and tx-disable unconnected + }; + + i2c1: i2c-gpio-1 { + compatible = "i2c-gpio"; + sda-gpios = <&gpio1 13 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + scl-gpios = <&gpio1 14 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + i2c-gpio,delay-us = <2>; + #address-cells = <1>; + #size-cells = <0>; + }; + + sfp1: sfp-1 { + compatible = "sff,sfp"; + i2c-bus = <&i2c1>; + los-gpio = <&gpio1 22 GPIO_ACTIVE_HIGH>; + mod-def0-gpio = <&gpio1 21 GPIO_ACTIVE_LOW>; + // tx-fault and tx-disable unconnected + }; +}; + +ðernet0 { + mdio: mdio-bus { + compatible = "realtek,rtl838x-mdio"; + regmap = <ðernet0>; + #address-cells = <1>; + #size-cells = <0>; + + INTERNAL_PHY(8) + INTERNAL_PHY(9) + INTERNAL_PHY(10) + INTERNAL_PHY(11) + INTERNAL_PHY(12) + INTERNAL_PHY(13) + INTERNAL_PHY(14) + INTERNAL_PHY(15) + + INTERNAL_PHY(24) + INTERNAL_PHY(26) + }; +}; + +&switch0 { + ports { + #address-cells = <1>; + #size-cells = <0>; + + SWITCH_PORT(8, 1, internal) + SWITCH_PORT(9, 2, internal) + SWITCH_PORT(10, 3, internal) + SWITCH_PORT(11, 4, internal) + SWITCH_PORT(12, 5, internal) + SWITCH_PORT(13, 6, internal) + SWITCH_PORT(14, 7, internal) + SWITCH_PORT(15, 8, internal) + + port@24 { + reg = <24>; + label = "lan9"; + phy-handle = <&phy24>; + phy-mode = "1000base-x"; + managed = "in-band-status"; + sfp = <&sfp0>; + }; + + port@26 { + reg = <26>; + label = "lan10"; + phy-handle = <&phy26>; + phy-mode = "1000base-x"; + managed = "in-band-status"; + sfp = <&sfp1>; + }; + + port@28 { + ethernet = <ðernet0>; + reg = <28>; + phy-mode = "internal"; + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + }; +}; diff --git a/target/linux/realtek/dts/rtl8380_netgear_gigabit.dtsi b/target/linux/realtek/dts/rtl8380_netgear_gigabit.dtsi new file mode 100644 index 0000000000..aca1a14774 --- /dev/null +++ b/target/linux/realtek/dts/rtl8380_netgear_gigabit.dtsi @@ -0,0 +1,141 @@ +// SPDX-License-Identifier: GPL-2.0-or-later + +#include "rtl838x.dtsi" + +#include +#include + +/ { + compatible = "realtek,rtl838x-soc"; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x8000000>; + }; + + keys { + pinctrl-names = "default"; + pinctrl-0 = <&pinmux_disable_sys_led>; + + compatible = "gpio-keys"; + + mode { + label = "reset"; + gpios = <&gpio0 0 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + }; + + gpio-restart { + compatible = "gpio-restart"; + gpios = <&gpio0 13 GPIO_ACTIVE_LOW>; + open-source; + }; + + gpio1: rtl8231-gpio { + compatible = "realtek,rtl8231-gpio"; + #gpio-cells = <2>; + gpio-controller; + indirect-access-bus-id = <31>; + }; +}; + +ðernet0 { + mdio: mdio-bus { + compatible = "realtek,rtl838x-mdio"; + regmap = <ðernet0>; + #address-cells = <1>; + #size-cells = <0>; + + INTERNAL_PHY(8) + INTERNAL_PHY(9) + INTERNAL_PHY(10) + INTERNAL_PHY(11) + INTERNAL_PHY(12) + INTERNAL_PHY(13) + INTERNAL_PHY(14) + INTERNAL_PHY(15) + }; +}; + +&spi0 { + status = "okay"; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <50000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "u-boot"; + reg = <0x0000000 0x00e0000>; + read-only; + }; + + partition@e0000 { + label = "u-boot-env"; + reg = <0x00e0000 0x0010000>; + }; + + partition@f0000 { + label = "u-boot-env2"; + reg = <0x00f0000 0x0010000>; + }; + + partition@100000 { + label = "jffs"; + reg = <0x0100000 0x0100000>; + read-only; + }; + + partition@200000 { + label = "jffs2"; + reg = <0x0200000 0x0100000>; + read-only; + }; + + firmware: partition@300000 { + label = "firmware"; + compatible = "openwrt,uimage", "denx,uimage"; + reg = <0x0300000 0x0e80000>; + }; + + partition@1180000 { + label = "runtime2"; + reg = <0x1180000 0x0e80000>; + read-only; + }; + }; + }; +}; + +&switch0 { + ports { + #address-cells = <1>; + #size-cells = <0>; + + SWITCH_PORT(8, 1, internal) + SWITCH_PORT(9, 2, internal) + SWITCH_PORT(10, 3, internal) + SWITCH_PORT(11, 4, internal) + SWITCH_PORT(12, 5, internal) + SWITCH_PORT(13, 6, internal) + SWITCH_PORT(14, 7, internal) + SWITCH_PORT(15, 8, internal) + + port@28 { + ethernet = <ðernet0>; + reg = <28>; + phy-mode = "internal"; + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + }; +}; diff --git a/target/linux/realtek/dts/rtl8380_netgear_gs108t-v3.dts b/target/linux/realtek/dts/rtl8380_netgear_gs108t-v3.dts new file mode 100644 index 0000000000..b26ebb9806 --- /dev/null +++ b/target/linux/realtek/dts/rtl8380_netgear_gs108t-v3.dts @@ -0,0 +1,37 @@ +// SPDX-License-Identifier: GPL-2.0-or-later + +#include "rtl8380_netgear_gigabit.dtsi" + +#include + +/ { + compatible = "netgear,gs108t-v3", "realtek,rtl838x-soc"; + model = "Netgear GS108T v3"; + + aliases { + led-boot = &led_power_green; + led-failsafe = &led_power_amber; + led-running = &led_power_green; + led-upgrade = &led_power_amber; + }; + + leds { + compatible = "gpio-leds"; + + led_power_amber: led-0 { + color = ; + function = LED_FUNCTION_POWER; + gpios = <&gpio1 32 GPIO_ACTIVE_LOW>; + }; + + led_power_green: led-1 { + color = ; + function = LED_FUNCTION_POWER; + gpios = <&gpio1 31 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&firmware { + openwrt,ih-magic = <0x4e474520>; +}; diff --git a/target/linux/realtek/dts/rtl8380_netgear_gs110tpp-v1.dts b/target/linux/realtek/dts/rtl8380_netgear_gs110tpp-v1.dts new file mode 100644 index 0000000000..f694ae3317 --- /dev/null +++ b/target/linux/realtek/dts/rtl8380_netgear_gs110tpp-v1.dts @@ -0,0 +1,58 @@ +// SPDX-License-Identifier: GPL-2.0-or-later + +#include "rtl8380_netgear_gigabit.dtsi" +#include + +/ { + compatible = "netgear,gs110tpp-v1", "realtek,rtl838x-soc"; + model = "Netgear GS110TPP v1"; + + aliases { + led-boot = &led_status_green; + led-failsafe = &led_status_red; + led-running = &led_status_green; + led-upgrade = &led_status_blue; + }; + + leds { + compatible = "gpio-leds"; + + led_status_red: led-0 { + color = ; + function = LED_FUNCTION_STATUS; + gpios = <&gpio1 31 GPIO_ACTIVE_LOW>; + }; + + led_status_green: led-1 { + color = ; + function = LED_FUNCTION_STATUS; + gpios = <&gpio1 32 GPIO_ACTIVE_LOW>; + }; + + led_status_blue: led-2 { + color = ; + function = LED_FUNCTION_STATUS; + gpios = <&gpio1 34 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&firmware { + openwrt,ih-magic = <0x4e474520>; +}; + +&uart1 { + status = "okay"; +}; + +&mdio { + EXTERNAL_PHY(16) + EXTERNAL_PHY(17) +}; + +&switch0 { + ports { + SWITCH_PORT(16, 9, qsgmii) + SWITCH_PORT(17, 10, qsgmii) + }; +}; diff --git a/target/linux/realtek/dts/rtl8380_netgear_gs110tup-v1.dts b/target/linux/realtek/dts/rtl8380_netgear_gs110tup-v1.dts new file mode 100644 index 0000000000..335aff2cf0 --- /dev/null +++ b/target/linux/realtek/dts/rtl8380_netgear_gs110tup-v1.dts @@ -0,0 +1,58 @@ +// SPDX-License-Identifier: GPL-2.0-or-later + +#include "rtl8380_netgear_gigabit.dtsi" +#include + +/ { + compatible = "netgear,gs110tup-v1", "realtek,rtl838x-soc"; + model = "Netgear GS110TUP v1"; + + aliases { + led-boot = &led_status_green; + led-failsafe = &led_status_red; + led-running = &led_status_green; + led-upgrade = &led_status_blue; + }; + + leds { + compatible = "gpio-leds"; + + led_status_red: led-0 { + color = ; + function = LED_FUNCTION_STATUS; + gpios = <&gpio1 31 GPIO_ACTIVE_LOW>; + }; + + led_status_green: led-1 { + color = ; + function = LED_FUNCTION_STATUS; + gpios = <&gpio1 32 GPIO_ACTIVE_LOW>; + }; + + led_status_blue: led-2 { + color = ; + function = LED_FUNCTION_STATUS; + gpios = <&gpio1 34 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&firmware { + openwrt,ih-magic = <0x4e474720>; +}; + +&uart1 { + status = "okay"; +}; + +&mdio { + EXTERNAL_PHY(16) + EXTERNAL_PHY(24) +}; + +&switch0 { + ports { + SWITCH_PORT(16, 9, qsgmii) + SWITCH_SFP_PORT(24, 10, rgmii-id) + }; +}; diff --git a/target/linux/realtek/dts/rtl8380_netgear_gs308t-v1.dts b/target/linux/realtek/dts/rtl8380_netgear_gs308t-v1.dts new file mode 100644 index 0000000000..5d77cf8c36 --- /dev/null +++ b/target/linux/realtek/dts/rtl8380_netgear_gs308t-v1.dts @@ -0,0 +1,37 @@ +// SPDX-License-Identifier: GPL-2.0-or-later + +#include "rtl8380_netgear_gigabit.dtsi" + +#include + +/ { + compatible = "netgear,gs308t-v1", "realtek,rtl838x-soc"; + model = "Netgear GS308T v1"; + + aliases { + led-boot = &led_power_green; + led-failsafe = &led_power_amber; + led-running = &led_power_green; + led-upgrade = &led_power_amber; + }; + + leds { + compatible = "gpio-leds"; + + led_power_amber: led-0 { + color = ; + function = LED_FUNCTION_POWER; + gpios = <&gpio1 32 GPIO_ACTIVE_LOW>; + }; + + led_power_green: led-1 { + color = ; + function = LED_FUNCTION_POWER; + gpios = <&gpio1 31 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&firmware { + openwrt,ih-magic = <0x4e474335>; +}; diff --git a/target/linux/realtek/dts/rtl8380_netgear_gs310tp-v1.dts b/target/linux/realtek/dts/rtl8380_netgear_gs310tp-v1.dts new file mode 100644 index 0000000000..a6f7181c11 --- /dev/null +++ b/target/linux/realtek/dts/rtl8380_netgear_gs310tp-v1.dts @@ -0,0 +1,29 @@ +// SPDX-License-Identifier: GPL-2.0-or-later + +#include "rtl8380_netgear_gigabit.dtsi" + +/ { + compatible = "netgear,gs310tp-v1", "realtek,rtl838x-soc"; + model = "Netgear GS310TP v1"; + +}; + +&firmware { + openwrt,ih-magic = <0x4e474335>; +}; + +&uart1 { + status = "okay"; +}; + +&mdio { + INTERNAL_PHY(24) + INTERNAL_PHY(26) +}; + +&switch0 { + ports { + SWITCH_SFP_PORT(24, 9, rgmii-id) + SWITCH_SFP_PORT(26, 10, rgmii-id) + }; +}; diff --git a/target/linux/realtek/dts/rtl8380_panasonic_m8eg-pn28080k.dts b/target/linux/realtek/dts/rtl8380_panasonic_m8eg-pn28080k.dts new file mode 100644 index 0000000000..bd59ff36f4 --- /dev/null +++ b/target/linux/realtek/dts/rtl8380_panasonic_m8eg-pn28080k.dts @@ -0,0 +1,131 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT + +#include "rtl838x.dtsi" +#include "rtl83xx_panasonic_mxxeg-pn28xx0k.dtsi" + +#include + +/ { + compatible = "panasonic,m8eg-pn28080k", "realtek,rtl8380-soc"; + model = "Panasonic Switch-M8eG PN28080K"; + + aliases { + led-boot = &led_status_eco_green; + led-failsafe = &led_status_eco_amber; + led-running = &led_status_eco_green; + led-upgrade = &led_status_eco_green; + }; + + sfp0: sfp-p9 { + compatible = "sff,sfp"; + i2c-bus = <&i2c0>; + tx-fault-gpio = <&gpio1 0 GPIO_ACTIVE_HIGH>; + tx-disable-gpio = <&gpio1 1 GPIO_ACTIVE_HIGH>; + mod-def0-gpio = <&gpio1 2 GPIO_ACTIVE_LOW>; + los-gpio = <&gpio1 3 GPIO_ACTIVE_HIGH>; + }; +}; + +&leds { + led_status_eco_amber: led-5 { + gpios = <&gpio2 1 GPIO_ACTIVE_LOW>; + color = ; + function = LED_FUNCTION_STATUS; + function-enumerator = <1>; + }; + + led_status_eco_green: led-6 { + gpios = <&gpio2 2 GPIO_ACTIVE_LOW>; + color = ; + function = LED_FUNCTION_STATUS; + function-enumerator = <2>; + }; +}; + +&i2c_gpio_0 { + scl-gpios = <&gpio0 0 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + sda-gpios = <&gpio0 1 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; +}; + +&i2c_gpio_1 { + scl-gpios = <&gpio0 12 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + sda-gpios = <&gpio0 13 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; +}; + +&gpio1 { + interrupt-controller; + #interrupt-cells = <2>; + interrupt-parent = <&gpio0>; + interrupts = <2 IRQ_TYPE_EDGE_FALLING>; +}; + +&gpio2 { + interrupt-controller; + #interrupt-cells = <2>; + interrupt-parent = <&gpio0>; + interrupts = <2 IRQ_TYPE_EDGE_FALLING>; +}; + +&i2c_switch { + i2c0: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; +}; + +ðernet0 { + mdio-bus { + compatible = "realtek,rtl838x-mdio"; + regmap = <ðernet0>; + #address-cells = <1>; + #size-cells = <0>; + + INTERNAL_PHY(8) + INTERNAL_PHY(9) + INTERNAL_PHY(10) + INTERNAL_PHY(11) + INTERNAL_PHY(12) + INTERNAL_PHY(13) + INTERNAL_PHY(14) + INTERNAL_PHY(15) + + INTERNAL_PHY(24) + }; +}; + +&switch0 { + ports { + #address-cells = <1>; + #size-cells = <0>; + + SWITCH_PORT(8, 1, internal) + SWITCH_PORT(9, 2, internal) + SWITCH_PORT(10, 3, internal) + SWITCH_PORT(11, 4, internal) + SWITCH_PORT(12, 5, internal) + SWITCH_PORT(13, 6, internal) + SWITCH_PORT(14, 7, internal) + SWITCH_PORT(15, 8, internal) + + port@24 { + reg = <24>; + label = "lan9"; + phy-mode = "1000base-x"; + phy-handle = <&phy24>; + managed = "in-band-status"; + sfp = <&sfp0>; + }; + + port@28 { + ethernet = <ðernet0>; + reg = <28>; + phy-mode = "internal"; + + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + }; +}; diff --git a/target/linux/realtek/dts/rtl8380_tplink_sg2008p-v1.dts b/target/linux/realtek/dts/rtl8380_tplink_sg2008p-v1.dts new file mode 100644 index 0000000000..bf43e412b1 --- /dev/null +++ b/target/linux/realtek/dts/rtl8380_tplink_sg2008p-v1.dts @@ -0,0 +1,28 @@ +// SPDX-License-Identifier: GPL-2.0-or-later + +#include "rtl8380_tplink_sg2xxx.dtsi" + +/ { + compatible = "tplink,sg2008p-v1", "realtek,rtl838x-soc"; + model = "TP-Link SG2008P v1"; +}; + +&tps23861_20 { + status = "disabled"; +}; + +&phy24 { + status = "disabled"; +}; + +&phy26 { + status = "disabled"; +}; + +&port24 { + status = "disabled"; +}; + +&port26 { + status = "disabled"; +}; diff --git a/target/linux/realtek/dts/rtl8380_tplink_sg2210p-v3.dts b/target/linux/realtek/dts/rtl8380_tplink_sg2210p-v3.dts new file mode 100644 index 0000000000..4b0022c388 --- /dev/null +++ b/target/linux/realtek/dts/rtl8380_tplink_sg2210p-v3.dts @@ -0,0 +1,16 @@ +// SPDX-License-Identifier: GPL-2.0-or-later + +#include "rtl8380_tplink_sg2xxx.dtsi" + +/ { + compatible = "tplink,sg2210p-v3", "realtek,rtl838x-soc"; + model = "TP-Link SG2210P v3"; +}; + +&port24 { + label = "lan-sfp2"; +}; + +&port26 { + label = "lan-sfp1"; +}; diff --git a/target/linux/realtek/dts/rtl8380_tplink_sg2xxx.dtsi b/target/linux/realtek/dts/rtl8380_tplink_sg2xxx.dtsi new file mode 100644 index 0000000000..d30d7b374e --- /dev/null +++ b/target/linux/realtek/dts/rtl8380_tplink_sg2xxx.dtsi @@ -0,0 +1,188 @@ +// SPDX-License-Identifier: GPL-2.0-or-later + +#include "rtl838x.dtsi" + +#include +#include +#include + +/ { + aliases { + led-boot = &led_power; + led-failsafe = &led_power; + led-running = &led_power; + led-upgrade = &led_power; + label-mac-device = ðernet0; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x10000000>; + }; + + keys { + compatible = "gpio-keys"; + + reset { + label = "reset"; + gpios = <&gpio0 2 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + }; + + gpio-restart { + compatible = "gpio-restart"; + gpios = <&gpio0 3 GPIO_ACTIVE_LOW>; + }; + + leds { + compatible = "gpio-leds"; + + led_power: led-0 { + function = LED_FUNCTION_POWER; + color = ; + gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>; + }; + }; + + i2c1: i2c-gpio-1 { + compatible = "i2c-gpio"; + scl-gpios = <&gpio0 0 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + sda-gpios = <&gpio0 1 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + i2c-gpio,delay-us = <2>; + #address-cells = <1>; + #size-cells = <0>; + + tps23861_20: tps23861@20 { + compatible = "ti,tps23861"; + reg = <0x20>; + shunt-resistor-micro-ohms = <255000>; + }; + + tps23861_28: tps23861@28 { + compatible = "ti,tps23861"; + reg = <0x28>; + shunt-resistor-micro-ohms = <255000>; + }; + }; + + watchdog { + compatible = "linux,wdt-gpio"; + gpios = <&gpio0 11 GPIO_ACTIVE_HIGH>; + hw_algo = "toggle"; + /* SGM706 specs: typical 1.6s, but minimum 1.0s. */ + hw_margin_ms = <1000>; + }; +}; + +&gpio0 { + watchdog-enable { + gpio-hog; + gpios = <14 GPIO_ACTIVE_LOW>; + output-low; + line-name = "watchdog-enable"; + }; +}; + +&spi0 { + status = "okay"; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <10000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "u-boot"; + reg = <0x0 0xe0000>; + read-only; + }; + partition@e0000 { + label = "u-boot-env"; + reg = <0xe0000 0x20000>; + }; + partition@100000 { + compatible = "denx,uimage"; + label = "firmware"; + reg = <0x100000 0x1a00000>; + }; + partition@1b00000 { + label = "usrappfs"; + reg = <0x1b00000 0x400000>; + }; + partition@1f00000 { + label = "para"; + reg = <0x1f00000 0x100000>; + read-only; + + nvmem-layout { + compatible = "fixed-layout"; + #address-cells = <1>; + #size-cells = <1>; + + factory_macaddr: macaddr@fdff4 { + reg = <0xfdff4 0x6>; + }; + }; + }; + }; + }; +}; + +ðernet0 { + nvmem-cells = <&factory_macaddr>; + nvmem-cell-names = "mac-address"; + + mdio: mdio-bus { + compatible = "realtek,rtl838x-mdio"; + #address-cells = <1>; + #size-cells = <0>; + + INTERNAL_PHY(8) + INTERNAL_PHY(9) + INTERNAL_PHY(10) + INTERNAL_PHY(11) + INTERNAL_PHY(12) + INTERNAL_PHY(13) + INTERNAL_PHY(14) + INTERNAL_PHY(15) + + INTERNAL_PHY(24) + INTERNAL_PHY(26) + }; +}; + +&switch0 { + ports { + #address-cells = <1>; + #size-cells = <0>; + + SWITCH_PORT(15, 1, internal) + SWITCH_PORT(14, 2, internal) + SWITCH_PORT(13, 3, internal) + SWITCH_PORT(12, 4, internal) + SWITCH_PORT(11, 5, internal) + SWITCH_PORT(10, 6, internal) + SWITCH_PORT(9, 7, internal) + SWITCH_PORT(8, 8, internal) + + SWITCH_SFP_PORT(24, 9, 1000base-x) + SWITCH_SFP_PORT(26, 10, 1000base-x) + + port@28 { + ethernet = <ðernet0>; + reg = <28>; + phy-mode = "internal"; + + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + }; +}; diff --git a/target/linux/realtek/dts/rtl8380_zyxel_gs1900-10hp.dts b/target/linux/realtek/dts/rtl8380_zyxel_gs1900-10hp.dts new file mode 100644 index 0000000000..190a77b7ff --- /dev/null +++ b/target/linux/realtek/dts/rtl8380_zyxel_gs1900-10hp.dts @@ -0,0 +1,75 @@ +// SPDX-License-Identifier: GPL-2.0-or-later + +#include "rtl8380_zyxel_gs1900.dtsi" + +/ { + compatible = "zyxel,gs1900-10hp", "realtek,rtl838x-soc"; + model = "Zyxel GS1900-10HP Switch"; + + /* i2c of the left SFP cage: port 9 */ + i2c0: i2c-gpio-0 { + compatible = "i2c-gpio"; + sda-gpios = <&gpio1 24 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + scl-gpios = <&gpio1 25 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + i2c-gpio,delay-us = <2>; + #address-cells = <1>; + #size-cells = <0>; + }; + + sfp0: sfp-p9 { + compatible = "sff,sfp"; + i2c-bus = <&i2c0>; + los-gpio = <&gpio1 27 GPIO_ACTIVE_HIGH>; + tx-fault-gpio = <&gpio1 22 GPIO_ACTIVE_HIGH>; + mod-def0-gpio = <&gpio1 26 GPIO_ACTIVE_LOW>; + tx-disable-gpio = <&gpio1 23 GPIO_ACTIVE_HIGH>; + }; + + /* i2c of the right SFP cage: port 10 */ + i2c1: i2c-gpio-1 { + compatible = "i2c-gpio"; + sda-gpios = <&gpio1 30 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + scl-gpios = <&gpio1 31 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + i2c-gpio,delay-us = <2>; + #address-cells = <1>; + #size-cells = <0>; + }; + + sfp1: sfp-p10 { + compatible = "sff,sfp"; + i2c-bus = <&i2c1>; + los-gpio = <&gpio1 33 GPIO_ACTIVE_HIGH>; + tx-fault-gpio = <&gpio1 28 GPIO_ACTIVE_HIGH>; + mod-def0-gpio = <&gpio1 32 GPIO_ACTIVE_LOW>; + tx-disable-gpio = <&gpio1 29 GPIO_ACTIVE_HIGH>; + }; +}; + +&uart1 { + status = "okay"; +}; + +&mdio { + INTERNAL_PHY(24) + INTERNAL_PHY(26) +}; + +&switch0 { + ports { + port@24 { + reg = <24>; + label = "lan9"; + phy-mode = "1000base-x"; + managed = "in-band-status"; + sfp = <&sfp0>; + }; + + port@26 { + reg = <26>; + label = "lan10"; + phy-mode = "1000base-x"; + managed = "in-band-status"; + sfp = <&sfp1>; + }; + }; +}; diff --git a/target/linux/realtek/dts/rtl8380_zyxel_gs1900-8.dts b/target/linux/realtek/dts/rtl8380_zyxel_gs1900-8.dts new file mode 100644 index 0000000000..548e83ba73 --- /dev/null +++ b/target/linux/realtek/dts/rtl8380_zyxel_gs1900-8.dts @@ -0,0 +1,12 @@ +// SPDX-License-Identifier: GPL-2.0-or-later + +#include "rtl8380_zyxel_gs1900.dtsi" + +/ { + compatible = "zyxel,gs1900-8", "realtek,rtl838x-soc"; + model = "Zyxel GS1900-8v1/v2 Switch"; +}; + +&gpio1 { + /delete-node/ poe_enable; +}; diff --git a/target/linux/realtek/dts/rtl8380_zyxel_gs1900-8hp-v1.dts b/target/linux/realtek/dts/rtl8380_zyxel_gs1900-8hp-v1.dts new file mode 100644 index 0000000000..386edfb015 --- /dev/null +++ b/target/linux/realtek/dts/rtl8380_zyxel_gs1900-8hp-v1.dts @@ -0,0 +1,12 @@ +// SPDX-License-Identifier: GPL-2.0-or-later + +#include "rtl8380_zyxel_gs1900.dtsi" + +/ { + compatible = "zyxel,gs1900-8hp-v1", "realtek,rtl838x-soc"; + model = "Zyxel GS1900-8HP v1 Switch"; +}; + +&uart1 { + status = "okay"; +}; diff --git a/target/linux/realtek/dts/rtl8380_zyxel_gs1900-8hp-v2.dts b/target/linux/realtek/dts/rtl8380_zyxel_gs1900-8hp-v2.dts new file mode 100644 index 0000000000..2702f2ba1c --- /dev/null +++ b/target/linux/realtek/dts/rtl8380_zyxel_gs1900-8hp-v2.dts @@ -0,0 +1,12 @@ +// SPDX-License-Identifier: GPL-2.0-or-later + +#include "rtl8380_zyxel_gs1900.dtsi" + +/ { + compatible = "zyxel,gs1900-8hp-v2", "realtek,rtl838x-soc"; + model = "Zyxel GS1900-8HP v2 Switch"; +}; + +&uart1 { + status = "okay"; +}; diff --git a/target/linux/realtek/dts/rtl8380_zyxel_gs1900.dtsi b/target/linux/realtek/dts/rtl8380_zyxel_gs1900.dtsi new file mode 100644 index 0000000000..5993c1b798 --- /dev/null +++ b/target/linux/realtek/dts/rtl8380_zyxel_gs1900.dtsi @@ -0,0 +1,149 @@ +// SPDX-License-Identifier: GPL-2.0-or-later + +#include "rtl838x.dtsi" + +#include +#include + +/ { + aliases { + led-boot = &led_sys; + led-failsafe = &led_sys; + led-running = &led_sys; + led-upgrade = &led_sys; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x8000000>; + }; + + keys { + compatible = "gpio-keys-polled"; + poll-interval = <20>; + + reset { + label = "reset"; + gpios = <&gpio1 3 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + }; + + leds { + pinctrl-names = "default"; + pinctrl-0 = <&pinmux_disable_sys_led>; + compatible = "gpio-leds"; + + led_sys: sys { + label = "green:sys"; + gpios = <&gpio0 0 GPIO_ACTIVE_HIGH>; + }; + }; + + gpio1: rtl8231-gpio { + compatible = "realtek,rtl8231-gpio"; + #gpio-cells = <2>; + gpio-controller; + indirect-access-bus-id = <0>; + + poe_enable { + gpio-hog; + gpios = <13 GPIO_ACTIVE_HIGH>; + output-high; + }; + }; +}; + +&spi0 { + status = "okay"; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <10000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x40000>; + read-only; + }; + partition@40000 { + label = "u-boot-env"; + reg = <0x40000 0x10000>; + read-only; + }; + partition@50000 { + label = "u-boot-env2"; + reg = <0x50000 0x10000>; + }; + partition@60000 { + label = "jffs"; + reg = <0x60000 0x100000>; + }; + partition@160000 { + label = "jffs2"; + reg = <0x160000 0x100000>; + }; + partition@b260000 { + label = "firmware"; + reg = <0x260000 0x6d0000>; + compatible = "openwrt,uimage", "denx,uimage"; + openwrt,ih-magic = <0x83800000>; + }; + partition@930000 { + label = "runtime2"; + reg = <0x930000 0x6d0000>; + }; + }; + }; +}; + +ðernet0 { + mdio: mdio-bus { + compatible = "realtek,rtl838x-mdio"; + regmap = <ðernet0>; + #address-cells = <1>; + #size-cells = <0>; + + INTERNAL_PHY(8) + INTERNAL_PHY(9) + INTERNAL_PHY(10) + INTERNAL_PHY(11) + INTERNAL_PHY(12) + INTERNAL_PHY(13) + INTERNAL_PHY(14) + INTERNAL_PHY(15) + }; +}; + +&switch0 { + ports { + #address-cells = <1>; + #size-cells = <0>; + + SWITCH_PORT(8, 1, internal) + SWITCH_PORT(9, 2, internal) + SWITCH_PORT(10, 3, internal) + SWITCH_PORT(11, 4, internal) + SWITCH_PORT(12, 5, internal) + SWITCH_PORT(13, 6, internal) + SWITCH_PORT(14, 7, internal) + SWITCH_PORT(15, 8, internal) + + port@28 { + ethernet = <ðernet0>; + reg = <28>; + phy-mode = "internal"; + + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + }; +}; diff --git a/target/linux/realtek/dts/rtl8382_allnet_all-sg8208m.dts b/target/linux/realtek/dts/rtl8382_allnet_all-sg8208m.dts new file mode 100644 index 0000000000..320cb08ac7 --- /dev/null +++ b/target/linux/realtek/dts/rtl8382_allnet_all-sg8208m.dts @@ -0,0 +1,141 @@ +// SPDX-License-Identifier: GPL-2.0-or-later + +#include "rtl838x.dtsi" + +#include +#include + +/ { + compatible = "allnet,all-sg8208m", "realtek,rtl838x-soc"; + model = "ALLNET ALL-SG8208M"; + + aliases { + led-boot = &led_sys; + led-failsafe = &led_sys; + led-running = &led_sys; + led-upgrade = &led_sys; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x8000000>; + }; + + keys { + compatible = "gpio-keys-polled"; + poll-interval = <20>; + + /* is this pin 3 on the external RTL8231 (&gpio1)? */ + /*reset { + label = "reset"; + gpios = <&gpio0 67 GPIO_ACTIVE_LOW>; + linux,code = ; + };*/ + }; + + leds { + pinctrl-names = "default"; + pinctrl-0 = <&pinmux_disable_sys_led>; + compatible = "gpio-leds"; + + led_sys: sys { + label = "green:sys"; + gpios = <&gpio0 0 GPIO_ACTIVE_HIGH>; + }; + // GPIO 25: power on/off all port leds + }; +}; + +&spi0 { + status = "okay"; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <10000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x80000>; + read-only; + }; + + partition@80000 { + label = "u-boot-env"; + reg = <0x80000 0x10000>; + read-only; + }; + + partition@90000 { + label = "u-boot-env2"; + reg = <0x90000 0x10000>; + }; + + partition@a0000 { + label = "jffs"; + reg = <0xa0000 0x100000>; + }; + + partition@1a0000 { + label = "jffs2"; + reg = <0x1a0000 0x100000>; + }; + + partition@2a0000 { + label = "firmware"; + reg = <0x2a0000 0xd60000>; + compatible = "openwrt,uimage", "denx,uimage"; + openwrt,ih-magic = <0x00000006>; + }; + }; + }; +}; + +ðernet0 { + mdio: mdio-bus { + compatible = "realtek,rtl838x-mdio"; + regmap = <ðernet0>; + #address-cells = <1>; + #size-cells = <0>; + + INTERNAL_PHY(8) + INTERNAL_PHY(9) + INTERNAL_PHY(10) + INTERNAL_PHY(11) + INTERNAL_PHY(12) + INTERNAL_PHY(13) + INTERNAL_PHY(14) + INTERNAL_PHY(15) + }; +}; + +&switch0 { + ports { + #address-cells = <1>; + #size-cells = <0>; + + SWITCH_PORT(8, 1, internal) + SWITCH_PORT(9, 2, internal) + SWITCH_PORT(10, 3, internal) + SWITCH_PORT(11, 4, internal) + SWITCH_PORT(12, 5, internal) + SWITCH_PORT(13, 6, internal) + SWITCH_PORT(14, 7, internal) + SWITCH_PORT(15, 8, internal) + + port@28 { + ethernet = <ðernet0>; + reg = <28>; + phy-mode = "internal"; + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + }; +}; diff --git a/target/linux/realtek/dts/rtl8382_apresia_aplgs120gtss.dts b/target/linux/realtek/dts/rtl8382_apresia_aplgs120gtss.dts new file mode 100644 index 0000000000..de17958af1 --- /dev/null +++ b/target/linux/realtek/dts/rtl8382_apresia_aplgs120gtss.dts @@ -0,0 +1,267 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT + +#include "rtl838x.dtsi" + +#include +#include +#include + +/ { + compatible = "apresia,aplgs120gtss", "realtek,rtl8382-soc"; + model = "APRESIA ApresiaLightGS120GT-SS"; + + aliases { + led-boot = &led_power; + led-failsafe = &led_power; + led-running = &led_power; + led-upgrade = &led_power; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x10000000>; + }; + + leds { + compatible = "gpio-leds"; + + led_power: led-0 { + gpios = <&gpio0 0 GPIO_ACTIVE_LOW>; + color = ; + function = LED_FUNCTION_POWER; + }; + + led-1 { + gpios = <&gpio1 10 GPIO_ACTIVE_LOW>; + color = ; + function = LED_FUNCTION_FAULT; + }; + + /* LED chip is soldered, but no hole on the case */ + led-2 { + gpios = <&gpio1 36 GPIO_ACTIVE_LOW>; + color = ; + }; + }; + + keys { + compatible = "gpio-keys-polled"; + poll-interval = <20>; + + reset { + label = "reset"; + gpios = <&gpio1 33 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + }; + + gpio-restart { + compatible = "gpio-restart"; + gpios = <&gpio1 34 GPIO_ACTIVE_LOW>; + open-source; + }; + + gpio1: rtl8231-gpio { + compatible = "realtek,rtl8231-gpio"; + #gpio-cells = <2>; + gpio-controller; + indirect-access-bus-id = <0>; + }; + + i2c0: i2c-gpio-0 { + compatible = "i2c-gpio"; + sda-gpios = <&gpio1 1 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + scl-gpios = <&gpio1 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + i2c-gpio,delay-us = <2>; + #address-cells = <1>; + #size-cells = <0>; + }; + + i2c1: i2c-gpio-1 { + compatible = "i2c-gpio"; + sda-gpios = <&gpio1 6 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + scl-gpios = <&gpio1 7 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + i2c-gpio,delay-us = <2>; + #address-cells = <1>; + #size-cells = <0>; + }; + + i2c2: i2c-gpio-2 { + compatible = "i2c-gpio"; + sda-gpios = <&gpio1 11 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + scl-gpios = <&gpio1 12 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + i2c-gpio,delay-us = <2>; + #address-cells = <1>; + #size-cells = <0>; + }; + + i2c3: i2c-gpio-3 { + compatible = "i2c-gpio"; + sda-gpios = <&gpio1 22 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + scl-gpios = <&gpio1 23 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + i2c-gpio,delay-us = <2>; + #address-cells = <1>; + #size-cells = <0>; + }; + + /* 4x TX-Disable lines are provided by RTL8214FC */ + sfp0: sfp-p17 { + compatible = "sff,sfp"; + i2c-bus = <&i2c1>; + los-gpio = <&gpio1 9 GPIO_ACTIVE_HIGH>; + mod-def0-gpio = <&gpio1 8 GPIO_ACTIVE_LOW>; + }; + + sfp1: sfp-p18 { + compatible = "sff,sfp"; + i2c-bus = <&i2c0>; + los-gpio = <&gpio1 4 GPIO_ACTIVE_HIGH>; + mod-def0-gpio = <&gpio1 3 GPIO_ACTIVE_LOW>; + }; + + sfp2: sfp-p19 { + compatible = "sff,sfp"; + i2c-bus = <&i2c3>; + los-gpio = <&gpio1 25 GPIO_ACTIVE_HIGH>; + mod-def0-gpio = <&gpio1 24 GPIO_ACTIVE_LOW>; + }; + + sfp3: sfp-p20 { + compatible = "sff,sfp"; + i2c-bus = <&i2c2>; + los-gpio = <&gpio1 14 GPIO_ACTIVE_HIGH>; + mod-def0-gpio = <&gpio1 13 GPIO_ACTIVE_LOW>; + }; +}; + +&gpio0 { + rtl8231_reset { + gpio-hog; + gpios = <1 GPIO_ACTIVE_HIGH>; + output-high; + line-name = "rtl8231-reset"; + }; +}; + +&spi0 { + status = "okay"; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <10000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x80000>; + read-only; + }; + + partition@80000 { + label = "u-boot-env"; + reg = <0x80000 0x40000>; + }; + + partition@c0000 { + label = "u-boot-env2"; + reg = <0xc0000 0x40000>; + }; + + partition@100000 { + compatible = "openwrt,uimage", "denx,uimage"; + label = "firmware"; + reg = <0x100000 0xe80000>; + openwrt,ih-magic = <0x12345000>; + }; + + partition@f80000 { + label = "firmware2"; + reg = <0xf80000 0xe80000>; + }; + + partition@1e00000 { + label = "jffs2"; + reg = <0x1e00000 0x200000>; + read-only; + }; + }; + }; +}; + +ðernet0 { + mdio-bus { + compatible = "realtek,rtl838x-mdio"; + regmap = <ðernet0>; + #address-cells = <1>; + #size-cells = <0>; + + EXTERNAL_PHY(0) + EXTERNAL_PHY(1) + EXTERNAL_PHY(2) + EXTERNAL_PHY(3) + EXTERNAL_PHY(4) + EXTERNAL_PHY(5) + EXTERNAL_PHY(6) + EXTERNAL_PHY(7) + + INTERNAL_PHY(8) + INTERNAL_PHY(9) + INTERNAL_PHY(10) + INTERNAL_PHY(11) + INTERNAL_PHY(12) + INTERNAL_PHY(13) + INTERNAL_PHY(14) + INTERNAL_PHY(15) + + EXTERNAL_SFP_PHY_FULL(24, 0) + EXTERNAL_SFP_PHY_FULL(25, 1) + EXTERNAL_SFP_PHY_FULL(26, 2) + EXTERNAL_SFP_PHY_FULL(27, 3) + }; +}; + +&switch0 { + ports { + #address-cells = <1>; + #size-cells = <0>; + + SWITCH_PORT(0, 1, qsgmii) + SWITCH_PORT(1, 2, qsgmii) + SWITCH_PORT(2, 3, qsgmii) + SWITCH_PORT(3, 4, qsgmii) + SWITCH_PORT(4, 5, qsgmii) + SWITCH_PORT(5, 6, qsgmii) + SWITCH_PORT(6, 7, qsgmii) + SWITCH_PORT(7, 8, qsgmii) + + SWITCH_PORT(8, 9, internal) + SWITCH_PORT(9, 10, internal) + SWITCH_PORT(10, 11, internal) + SWITCH_PORT(11, 12, internal) + SWITCH_PORT(12, 13, internal) + SWITCH_PORT(13, 14, internal) + SWITCH_PORT(14, 15, internal) + SWITCH_PORT(15, 16, internal) + + SWITCH_PORT(24, 17, qsgmii) + SWITCH_PORT(25, 18, qsgmii) + SWITCH_PORT(26, 19, qsgmii) + SWITCH_PORT(27, 20, qsgmii) + + port@28 { + ethernet = <ðernet0>; + reg = <28>; + phy-mode = "internal"; + + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + }; +}; diff --git a/target/linux/realtek/dts/rtl8382_d-link_dgs-1210-10p.dts b/target/linux/realtek/dts/rtl8382_d-link_dgs-1210-10p.dts new file mode 100644 index 0000000000..1aef88afd4 --- /dev/null +++ b/target/linux/realtek/dts/rtl8382_d-link_dgs-1210-10p.dts @@ -0,0 +1,154 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT + +#include "rtl838x.dtsi" +#include "rtl83xx_d-link_dgs-1210_common.dtsi" + +/ { + compatible = "d-link,dgs-1210-10p", "realtek,rtl838x-soc"; + model = "D-Link DGS-1210-10P"; + + /* i2c of the left SFP cage: port 9 */ + i2c0: i2c-gpio-0 { + compatible = "i2c-gpio"; + sda-gpios = <&gpio1 6 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + scl-gpios = <&gpio1 7 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + i2c-gpio,delay-us = <2>; + #address-cells = <1>; + #size-cells = <0>; + }; + + sfp0: sfp-p9 { + compatible = "sff,sfp"; + i2c-bus = <&i2c0>; + los-gpio = <&gpio1 9 GPIO_ACTIVE_HIGH>; + mod-def0-gpio = <&gpio1 8 GPIO_ACTIVE_LOW>; + tx-disable-gpio = <&gpio1 11 GPIO_ACTIVE_HIGH>; + }; + + /* i2c of the right SFP cage: port 10 */ + i2c1: i2c-gpio-1 { + compatible = "i2c-gpio"; + sda-gpios = <&gpio1 1 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + scl-gpios = <&gpio1 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + i2c-gpio,delay-us = <2>; + #address-cells = <1>; + #size-cells = <0>; + }; + + sfp1: sfp-p10 { + compatible = "sff,sfp"; + i2c-bus = <&i2c1>; + los-gpio = <&gpio1 4 GPIO_ACTIVE_HIGH>; + mod-def0-gpio = <&gpio1 3 GPIO_ACTIVE_LOW>; + tx-disable-gpio = <&gpio1 12 GPIO_ACTIVE_HIGH>; + }; + + keys { + compatible = "gpio-keys-polled"; + poll-interval = <20>; + + mode { + label = "mode"; + gpios = <&gpio1 30 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + + reset { + label = "reset"; + gpios = <&gpio1 33 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + }; + + leds { + link_act { + label = "green:link_act"; + gpios = <&gpio1 28 GPIO_ACTIVE_LOW>; + }; + + poe { + label = "green:poe"; + gpios = <&gpio1 29 GPIO_ACTIVE_LOW>; + }; + + poe_max { + label = "yellow:poe_max"; + gpios = <&gpio1 27 GPIO_ACTIVE_LOW>; + }; + }; + + gpio1: rtl8231-gpio { + compatible = "realtek,rtl8231-gpio"; + #gpio-cells = <2>; + gpio-controller; + indirect-access-bus-id = <0>; + }; +}; + +&uart1 { + status = "okay"; +}; + +ðernet0 { + mdio: mdio-bus { + compatible = "realtek,rtl838x-mdio"; + regmap = <ðernet0>; + #address-cells = <1>; + #size-cells = <0>; + + INTERNAL_PHY(8) + INTERNAL_PHY(9) + INTERNAL_PHY(10) + INTERNAL_PHY(11) + INTERNAL_PHY(12) + INTERNAL_PHY(13) + INTERNAL_PHY(14) + INTERNAL_PHY(15) + INTERNAL_PHY(24) + INTERNAL_PHY(26) + }; +}; + +&switch0 { + ports { + #address-cells = <1>; + #size-cells = <0>; + + SWITCH_PORT(8, 1, internal) + SWITCH_PORT(9, 2, internal) + SWITCH_PORT(10, 3, internal) + SWITCH_PORT(11, 4, internal) + SWITCH_PORT(12, 5, internal) + SWITCH_PORT(13, 6, internal) + SWITCH_PORT(14, 7, internal) + SWITCH_PORT(15, 8, internal) + + port@24 { + reg = <24>; + label = "lan9"; + phy-handle = <&phy24>; + phy-mode = "1000base-x"; + managed = "in-band-status"; + sfp = <&sfp0>; + }; + + port@26 { + reg = <26>; + label = "lan10"; + phy-handle = <&phy26>; + phy-mode = "1000base-x"; + managed = "in-band-status"; + sfp = <&sfp1>; + }; + + port@28 { + ethernet = <ðernet0>; + reg = <28>; + phy-mode = "internal"; + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + }; +}; diff --git a/target/linux/realtek/dts/rtl8382_d-link_dgs-1210-16.dts b/target/linux/realtek/dts/rtl8382_d-link_dgs-1210-16.dts new file mode 100644 index 0000000000..c9a79fb607 --- /dev/null +++ b/target/linux/realtek/dts/rtl8382_d-link_dgs-1210-16.dts @@ -0,0 +1,82 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT + +#include "rtl838x.dtsi" +#include "rtl83xx_d-link_dgs-1210_common.dtsi" +#include "rtl83xx_d-link_dgs-1210_gpio.dtsi" + +/ { + compatible = "d-link,dgs-1210-16", "realtek,rtl838x-soc"; + model = "D-Link DGS-1210-16"; +}; + +ðernet0 { + mdio: mdio-bus { + compatible = "realtek,rtl838x-mdio"; + regmap = <ðernet0>; + #address-cells = <1>; + #size-cells = <0>; + + EXTERNAL_PHY(0) + EXTERNAL_PHY(1) + EXTERNAL_PHY(2) + EXTERNAL_PHY(3) + EXTERNAL_PHY(4) + EXTERNAL_PHY(5) + EXTERNAL_PHY(6) + EXTERNAL_PHY(7) + + INTERNAL_PHY(8) + INTERNAL_PHY(9) + INTERNAL_PHY(10) + INTERNAL_PHY(11) + INTERNAL_PHY(12) + INTERNAL_PHY(13) + INTERNAL_PHY(14) + INTERNAL_PHY(15) + + EXTERNAL_SFP_PHY(24) + EXTERNAL_SFP_PHY(25) + EXTERNAL_SFP_PHY(26) + EXTERNAL_SFP_PHY(27) + }; +}; + +&switch0 { + ports { + #address-cells = <1>; + #size-cells = <0>; + + SWITCH_PORT(0, 1, qsgmii) + SWITCH_PORT(1, 2, qsgmii) + SWITCH_PORT(2, 3, qsgmii) + SWITCH_PORT(3, 4, qsgmii) + SWITCH_PORT(4, 5, qsgmii) + SWITCH_PORT(5, 6, qsgmii) + SWITCH_PORT(6, 7, qsgmii) + SWITCH_PORT(7, 8, qsgmii) + + SWITCH_PORT(8, 9, internal) + SWITCH_PORT(9, 10, internal) + SWITCH_PORT(10, 11, internal) + SWITCH_PORT(11, 12, internal) + SWITCH_PORT(12, 13, internal) + SWITCH_PORT(13, 14, internal) + SWITCH_PORT(14, 15, internal) + SWITCH_PORT(15, 16, internal) + + SWITCH_PORT(24, 17, qsgmii) + SWITCH_PORT(25, 18, qsgmii) + SWITCH_PORT(26, 19, qsgmii) + SWITCH_PORT(27, 20, qsgmii) + + port@28 { + ethernet = <ðernet0>; + reg = <28>; + phy-mode = "internal"; + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + }; +}; diff --git a/target/linux/realtek/dts/rtl8382_d-link_dgs-1210-20.dts b/target/linux/realtek/dts/rtl8382_d-link_dgs-1210-20.dts new file mode 100644 index 0000000000..dacc50676d --- /dev/null +++ b/target/linux/realtek/dts/rtl8382_d-link_dgs-1210-20.dts @@ -0,0 +1,82 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT + +#include "rtl838x.dtsi" +#include "rtl83xx_d-link_dgs-1210_common.dtsi" +#include "rtl83xx_d-link_dgs-1210_gpio.dtsi" + +/ { + compatible = "d-link,dgs-1210-20", "realtek,rtl838x-soc"; + model = "D-Link DGS-1210-20"; +}; + +ðernet0 { + mdio: mdio-bus { + compatible = "realtek,rtl838x-mdio"; + regmap = <ðernet0>; + #address-cells = <1>; + #size-cells = <0>; + + EXTERNAL_PHY(0) + EXTERNAL_PHY(1) + EXTERNAL_PHY(2) + EXTERNAL_PHY(3) + EXTERNAL_PHY(4) + EXTERNAL_PHY(5) + EXTERNAL_PHY(6) + EXTERNAL_PHY(7) + + INTERNAL_PHY(8) + INTERNAL_PHY(9) + INTERNAL_PHY(10) + INTERNAL_PHY(11) + INTERNAL_PHY(12) + INTERNAL_PHY(13) + INTERNAL_PHY(14) + INTERNAL_PHY(15) + + EXTERNAL_SFP_PHY(24) + EXTERNAL_SFP_PHY(25) + EXTERNAL_SFP_PHY(26) + EXTERNAL_SFP_PHY(27) + }; +}; + +&switch0 { + ports { + #address-cells = <1>; + #size-cells = <0>; + + SWITCH_PORT(0, 1, qsgmii) + SWITCH_PORT(1, 2, qsgmii) + SWITCH_PORT(2, 3, qsgmii) + SWITCH_PORT(3, 4, qsgmii) + SWITCH_PORT(4, 5, qsgmii) + SWITCH_PORT(5, 6, qsgmii) + SWITCH_PORT(6, 7, qsgmii) + SWITCH_PORT(7, 8, qsgmii) + + SWITCH_PORT(8, 9, internal) + SWITCH_PORT(9, 10, internal) + SWITCH_PORT(10, 11, internal) + SWITCH_PORT(11, 12, internal) + SWITCH_PORT(12, 13, internal) + SWITCH_PORT(13, 14, internal) + SWITCH_PORT(14, 15, internal) + SWITCH_PORT(15, 16, internal) + + SWITCH_PORT(24, 17, qsgmii) + SWITCH_PORT(25, 18, qsgmii) + SWITCH_PORT(26, 19, qsgmii) + SWITCH_PORT(27, 20, qsgmii) + + port@28 { + ethernet = <ðernet0>; + reg = <28>; + phy-mode = "internal"; + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + }; +}; diff --git a/target/linux/realtek/dts/rtl8382_d-link_dgs-1210-28.dts b/target/linux/realtek/dts/rtl8382_d-link_dgs-1210-28.dts new file mode 100644 index 0000000000..0bcb196b7c --- /dev/null +++ b/target/linux/realtek/dts/rtl8382_d-link_dgs-1210-28.dts @@ -0,0 +1,11 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT + +#include "rtl838x.dtsi" +#include "rtl83xx_d-link_dgs-1210_common.dtsi" +#include "rtl83xx_d-link_dgs-1210_gpio.dtsi" +#include "rtl8382_d-link_dgs-1210-28_common.dtsi" + +/ { + compatible = "d-link,dgs-1210-28", "realtek,rtl838x-soc"; + model = "D-Link DGS-1210-28"; +}; diff --git a/target/linux/realtek/dts/rtl8382_d-link_dgs-1210-28_common.dtsi b/target/linux/realtek/dts/rtl8382_d-link_dgs-1210-28_common.dtsi new file mode 100644 index 0000000000..17866d5f03 --- /dev/null +++ b/target/linux/realtek/dts/rtl8382_d-link_dgs-1210-28_common.dtsi @@ -0,0 +1,91 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT + +ðernet0 { + mdio: mdio-bus { + compatible = "realtek,rtl838x-mdio"; + regmap = <ðernet0>; + #address-cells = <1>; + #size-cells = <0>; + + EXTERNAL_PHY(0) + EXTERNAL_PHY(1) + EXTERNAL_PHY(2) + EXTERNAL_PHY(3) + EXTERNAL_PHY(4) + EXTERNAL_PHY(5) + EXTERNAL_PHY(6) + EXTERNAL_PHY(7) + + INTERNAL_PHY(8) + INTERNAL_PHY(9) + INTERNAL_PHY(10) + INTERNAL_PHY(11) + INTERNAL_PHY(12) + INTERNAL_PHY(13) + INTERNAL_PHY(14) + INTERNAL_PHY(15) + + EXTERNAL_PHY(16) + EXTERNAL_PHY(17) + EXTERNAL_PHY(18) + EXTERNAL_PHY(19) + EXTERNAL_PHY(20) + EXTERNAL_PHY(21) + EXTERNAL_PHY(22) + EXTERNAL_PHY(23) + + EXTERNAL_SFP_PHY(24) + EXTERNAL_SFP_PHY(25) + EXTERNAL_SFP_PHY(26) + EXTERNAL_SFP_PHY(27) + }; +}; + +&switch0 { + ports { + #address-cells = <1>; + #size-cells = <0>; + + SWITCH_PORT(0, 1, qsgmii) + SWITCH_PORT(1, 2, qsgmii) + SWITCH_PORT(2, 3, qsgmii) + SWITCH_PORT(3, 4, qsgmii) + SWITCH_PORT(4, 5, qsgmii) + SWITCH_PORT(5, 6, qsgmii) + SWITCH_PORT(6, 7, qsgmii) + SWITCH_PORT(7, 8, qsgmii) + + SWITCH_PORT(8, 9, internal) + SWITCH_PORT(9, 10, internal) + SWITCH_PORT(10, 11, internal) + SWITCH_PORT(11, 12, internal) + SWITCH_PORT(12, 13, internal) + SWITCH_PORT(13, 14, internal) + SWITCH_PORT(14, 15, internal) + SWITCH_PORT(15, 16, internal) + + SWITCH_PORT(16, 17, qsgmii) + SWITCH_PORT(17, 18, qsgmii) + SWITCH_PORT(18, 19, qsgmii) + SWITCH_PORT(19, 20, qsgmii) + SWITCH_PORT(20, 21, qsgmii) + SWITCH_PORT(21, 22, qsgmii) + SWITCH_PORT(22, 23, qsgmii) + SWITCH_PORT(23, 24, qsgmii) + + SWITCH_PORT(24, 25, qsgmii) + SWITCH_PORT(25, 26, qsgmii) + SWITCH_PORT(26, 27, qsgmii) + SWITCH_PORT(27, 28, qsgmii) + + port@28 { + ethernet = <ðernet0>; + reg = <28>; + phy-mode = "internal"; + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + }; +}; diff --git a/target/linux/realtek/dts/rtl8382_d-link_dgs-1210-28mp-f.dts b/target/linux/realtek/dts/rtl8382_d-link_dgs-1210-28mp-f.dts new file mode 100644 index 0000000000..ce008229b3 --- /dev/null +++ b/target/linux/realtek/dts/rtl8382_d-link_dgs-1210-28mp-f.dts @@ -0,0 +1,40 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT + +#include "rtl838x.dtsi" +#include "rtl83xx_d-link_dgs-1210_common.dtsi" +#include "rtl83xx_d-link_dgs-1210_gpio.dtsi" +#include "rtl8382_d-link_dgs-1210-28_common.dtsi" + +/ { + compatible = "d-link,dgs-1210-28mp-f", "realtek,rtl8382-soc", "realtek,rtl838x-soc"; + model = "D-Link DGS-1210-28MP F"; +}; + +&leds { + link_act { + label = "green:link_act"; + gpios = <&gpio1 28 GPIO_ACTIVE_LOW>; + }; + + poe { + label = "green:poe"; + gpios = <&gpio1 29 GPIO_ACTIVE_LOW>; + }; + + poe_max { + label = "yellow:poe_max"; + gpios = <&gpio1 27 GPIO_ACTIVE_LOW>; + }; +}; + +&keys { + mode { + label = "mode"; + gpios = <&gpio1 30 GPIO_ACTIVE_LOW>; + linux,code = ; + }; +}; + +&uart1 { + status = "okay"; +}; diff --git a/target/linux/realtek/dts/rtl8382_hpe_1920-16g.dts b/target/linux/realtek/dts/rtl8382_hpe_1920-16g.dts new file mode 100644 index 0000000000..59043b2f6f --- /dev/null +++ b/target/linux/realtek/dts/rtl8382_hpe_1920-16g.dts @@ -0,0 +1,48 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT + +#include "rtl8382_hpe_1920.dtsi" + +/ { + compatible = "hpe,1920-16g", "realtek,rtl838x-soc"; + model = "HPE 1920-16G (JG923A)"; +}; + +&switch0 { + ports { + #address-cells = <1>; + #size-cells = <0>; + + SWITCH_PORT(8, 1, internal) + SWITCH_PORT(9, 2, internal) + SWITCH_PORT(10, 3, internal) + SWITCH_PORT(11, 4, internal) + SWITCH_PORT(12, 5, internal) + SWITCH_PORT(13, 6, internal) + SWITCH_PORT(14, 7, internal) + SWITCH_PORT(15, 8, internal) + + SWITCH_PORT(16, 9, qsgmii) + SWITCH_PORT(17, 10, qsgmii) + SWITCH_PORT(18, 11, qsgmii) + SWITCH_PORT(19, 12, qsgmii) + SWITCH_PORT(20, 13, qsgmii) + SWITCH_PORT(21, 14, qsgmii) + SWITCH_PORT(22, 15, qsgmii) + SWITCH_PORT(23, 16, qsgmii) + + SWITCH_PORT(24, 17, qsgmii) + SWITCH_PORT(25, 18, qsgmii) + SWITCH_PORT(26, 19, qsgmii) + SWITCH_PORT(27, 20, qsgmii) + + port@28 { + ethernet = <ðernet0>; + reg = <28>; + phy-mode = "internal"; + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + }; +}; diff --git a/target/linux/realtek/dts/rtl8382_hpe_1920-24g.dts b/target/linux/realtek/dts/rtl8382_hpe_1920-24g.dts new file mode 100644 index 0000000000..61781c708e --- /dev/null +++ b/target/linux/realtek/dts/rtl8382_hpe_1920-24g.dts @@ -0,0 +1,68 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT + +#include "rtl8382_hpe_1920.dtsi" + +/ { + compatible = "hpe,1920-24g", "realtek,rtl838x-soc"; + model = "HPE 1920-24G (JG924A)"; +}; + +&mdio { + EXTERNAL_PHY(0) + EXTERNAL_PHY(1) + EXTERNAL_PHY(2) + EXTERNAL_PHY(3) + EXTERNAL_PHY(4) + EXTERNAL_PHY(5) + EXTERNAL_PHY(6) + EXTERNAL_PHY(7) +}; + +&switch0 { + ports { + #address-cells = <1>; + #size-cells = <0>; + + SWITCH_PORT(0, 1, qsgmii) + SWITCH_PORT(1, 2, qsgmii) + SWITCH_PORT(2, 3, qsgmii) + SWITCH_PORT(3, 4, qsgmii) + SWITCH_PORT(4, 5, qsgmii) + SWITCH_PORT(5, 6, qsgmii) + SWITCH_PORT(6, 7, qsgmii) + SWITCH_PORT(7, 8, qsgmii) + + SWITCH_PORT(8, 9, internal) + SWITCH_PORT(9, 10, internal) + SWITCH_PORT(10, 11, internal) + SWITCH_PORT(11, 12, internal) + SWITCH_PORT(12, 13, internal) + SWITCH_PORT(13, 14, internal) + SWITCH_PORT(14, 15, internal) + SWITCH_PORT(15, 16, internal) + + SWITCH_PORT(16, 17, qsgmii) + SWITCH_PORT(17, 18, qsgmii) + SWITCH_PORT(18, 19, qsgmii) + SWITCH_PORT(19, 20, qsgmii) + SWITCH_PORT(20, 21, qsgmii) + SWITCH_PORT(21, 22, qsgmii) + SWITCH_PORT(22, 23, qsgmii) + SWITCH_PORT(23, 24, qsgmii) + + SWITCH_PORT(24, 25, qsgmii) + SWITCH_PORT(25, 26, qsgmii) + SWITCH_PORT(26, 27, qsgmii) + SWITCH_PORT(27, 28, qsgmii) + + port@28 { + ethernet = <ðernet0>; + reg = <28>; + phy-mode = "internal"; + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + }; +}; diff --git a/target/linux/realtek/dts/rtl8382_hpe_1920.dtsi b/target/linux/realtek/dts/rtl8382_hpe_1920.dtsi new file mode 100644 index 0000000000..5368b41c27 --- /dev/null +++ b/target/linux/realtek/dts/rtl8382_hpe_1920.dtsi @@ -0,0 +1,117 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT + +#include "rtl838x.dtsi" +#include "rtl838x_hpe_1920.dtsi" + +/ { + gpio1: rtl8231-gpio { + compatible = "realtek,rtl8231-gpio"; + #gpio-cells = <2>; + gpio-controller; + indirect-access-bus-id = <0>; + }; + + i2c0: i2c-gpio-0 { + compatible = "i2c-gpio"; + sda-gpios = <&gpio1 13 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + scl-gpios = <&gpio1 14 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + i2c-gpio,delay-us = <2>; + #address-cells = <1>; + #size-cells = <0>; + }; + + sfp0: sfp-0 { + compatible = "sff,sfp"; + i2c-bus = <&i2c0>; + los-gpio = <&gpio1 22 GPIO_ACTIVE_HIGH>; + mod-def0-gpio = <&gpio1 21 GPIO_ACTIVE_LOW>; + // tx-fault unconnected + // tx-disable connected to RTL8214FC + }; + + i2c1: i2c-gpio-1 { + compatible = "i2c-gpio"; + sda-gpios = <&gpio1 23 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + scl-gpios = <&gpio1 24 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + i2c-gpio,delay-us = <2>; + #address-cells = <1>; + #size-cells = <0>; + }; + + sfp1: sfp-1 { + compatible = "sff,sfp"; + i2c-bus = <&i2c1>; + los-gpio = <&gpio1 26 GPIO_ACTIVE_HIGH>; + mod-def0-gpio = <&gpio1 25 GPIO_ACTIVE_LOW>; + // tx-fault unconnected + // tx-disable connected to RTL8214FC + }; + + i2c2: i2c-gpio-2 { + compatible = "i2c-gpio"; + sda-gpios = <&gpio1 27 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + scl-gpios = <&gpio1 28 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + i2c-gpio,delay-us = <2>; + #address-cells = <1>; + #size-cells = <0>; + }; + + sfp2: sfp-2 { + compatible = "sff,sfp"; + i2c-bus = <&i2c2>; + los-gpio = <&gpio1 30 GPIO_ACTIVE_HIGH>; + mod-def0-gpio = <&gpio1 29 GPIO_ACTIVE_LOW>; + // tx-fault unconnected + // tx-disable connected to RTL8214FC + }; + + i2c3: i2c-gpio-3 { + compatible = "i2c-gpio"; + sda-gpios = <&gpio1 31 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + scl-gpios = <&gpio1 32 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + i2c-gpio,delay-us = <2>; + #address-cells = <1>; + #size-cells = <0>; + }; + + sfp3: sfp-3 { + compatible = "sff,sfp"; + i2c-bus = <&i2c3>; + los-gpio = <&gpio1 34 GPIO_ACTIVE_HIGH>; + mod-def0-gpio = <&gpio1 33 GPIO_ACTIVE_LOW>; + // tx-fault unconnected + // tx-disable connected to RTL8214FC + }; +}; + +ðernet0 { + mdio: mdio-bus { + compatible = "realtek,rtl838x-mdio"; + regmap = <ðernet0>; + #address-cells = <1>; + #size-cells = <0>; + + INTERNAL_PHY(8) + INTERNAL_PHY(9) + INTERNAL_PHY(10) + INTERNAL_PHY(11) + INTERNAL_PHY(12) + INTERNAL_PHY(13) + INTERNAL_PHY(14) + INTERNAL_PHY(15) + + EXTERNAL_PHY(16) + EXTERNAL_PHY(17) + EXTERNAL_PHY(18) + EXTERNAL_PHY(19) + EXTERNAL_PHY(20) + EXTERNAL_PHY(21) + EXTERNAL_PHY(22) + EXTERNAL_PHY(23) + + EXTERNAL_SFP_PHY_FULL(24, 0) + EXTERNAL_SFP_PHY_FULL(25, 1) + EXTERNAL_SFP_PHY_FULL(26, 2) + EXTERNAL_SFP_PHY_FULL(27, 3) + }; +}; diff --git a/target/linux/realtek/dts/rtl8382_inaba_aml2-17gp.dts b/target/linux/realtek/dts/rtl8382_inaba_aml2-17gp.dts new file mode 100644 index 0000000000..4808141494 --- /dev/null +++ b/target/linux/realtek/dts/rtl8382_inaba_aml2-17gp.dts @@ -0,0 +1,158 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT + +#include "rtl838x.dtsi" + +#include +#include + +/ { + compatible = "inaba,aml2-17gp", "realtek,rtl838x-soc"; + model = "INABA Abaniact AML2-17GP"; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x8000000>; + }; + + keys { + pinctrl-names = "default"; + pinctrl-0 = <&pinmux_disable_sys_led>; + + compatible = "gpio-keys"; + + reset { + label = "reset"; + gpios = <&gpio0 0 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + }; +}; + +&spi0 { + status = "okay"; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <10000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x80000>; + read-only; + }; + + partition@80000 { + label = "u-boot-env"; + reg = <0x80000 0x10000>; + read-only; + }; + + partition@90000 { + label = "u-boot-env2"; + reg = <0x90000 0x10000>; + }; + + partition@a0000 { + label = "jffs2_cfg"; + reg = <0xa0000 0x400000>; + read-only; + }; + + partition@4a0000 { + label = "jffs2_log"; + reg = <0x4a0000 0x100000>; + read-only; + }; + + partition@5a0000 { + compatible = "openwrt,uimage", "denx,uimage"; + label = "firmware"; + reg = <0x5a0000 0xd30000>; + openwrt,ih-magic = <0x83800000>; + }; + + partition@12d0000 { + label = "runtime2"; + reg = <0x12d0000 0xd30000>; + }; + }; + }; +}; + +ðernet0 { + mdio-bus { + compatible = "realtek,rtl838x-mdio"; + regmap = <ðernet0>; + #address-cells = <1>; + #size-cells = <0>; + + INTERNAL_PHY(8) + INTERNAL_PHY(9) + INTERNAL_PHY(10) + INTERNAL_PHY(11) + INTERNAL_PHY(12) + INTERNAL_PHY(13) + INTERNAL_PHY(14) + INTERNAL_PHY(15) + + EXTERNAL_PHY(16) + EXTERNAL_PHY(17) + EXTERNAL_PHY(18) + EXTERNAL_PHY(19) + EXTERNAL_PHY(20) + EXTERNAL_PHY(21) + EXTERNAL_PHY(22) + EXTERNAL_PHY(23) + + EXTERNAL_PHY(24) + }; +}; + +&switch0 { + ports { + #address-cells = <1>; + #size-cells = <0>; + + SWITCH_PORT(8, 1, internal) + SWITCH_PORT(9, 2, internal) + SWITCH_PORT(10, 3, internal) + SWITCH_PORT(11, 4, internal) + SWITCH_PORT(12, 5, internal) + SWITCH_PORT(13, 6, internal) + SWITCH_PORT(14, 7, internal) + SWITCH_PORT(15, 8, internal) + + SWITCH_PORT(16, 9, qsgmii) + SWITCH_PORT(17, 10, qsgmii) + SWITCH_PORT(18, 11, qsgmii) + SWITCH_PORT(19, 12, qsgmii) + SWITCH_PORT(20, 13, qsgmii) + SWITCH_PORT(21, 14, qsgmii) + SWITCH_PORT(22, 15, qsgmii) + SWITCH_PORT(23, 16, qsgmii) + + port@24 { + reg = <24>; + label = "wan"; + phy-handle = <&phy24>; + phy-mode = "qsgmii"; + }; + + port@28 { + ethernet = <ðernet0>; + reg = <28>; + phy-mode = "internal"; + + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + }; +}; diff --git a/target/linux/realtek/dts/rtl8382_iodata_bsh-g24mb.dts b/target/linux/realtek/dts/rtl8382_iodata_bsh-g24mb.dts new file mode 100644 index 0000000000..49b55813f9 --- /dev/null +++ b/target/linux/realtek/dts/rtl8382_iodata_bsh-g24mb.dts @@ -0,0 +1,192 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT + +#include "rtl838x.dtsi" + +#include +#include +#include + +/ { + compatible = "iodata,bsh-g24mb", "realtek,rtl838x-soc"; + model = "I-O DATA BSH-G24MB"; + + aliases { + led-boot = &led_sys_loop; + led-failsafe = &led_sys_loop; + led-upgrade = &led_sys_loop; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x8000000>; + }; + + leds { + pinctrl-names = "default"; + pinctrl-0 = <&pinmux_disable_sys_led>; + compatible = "gpio-leds"; + + led_sys_loop: led { + gpios = <&gpio0 0 GPIO_ACTIVE_HIGH>; + color = ; + function = LED_FUNCTION_STATUS; + }; + }; + + keys { + compatible = "gpio-keys-polled"; + poll-interval = <20>; + + reset { + label = "reset"; + gpios = <&gpio1 3 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + }; + + gpio1: rtl8231-gpio { + compatible = "realtek,rtl8231-gpio"; + #gpio-cells = <2>; + gpio-controller; + indirect-access-bus-id = <0>; + }; +}; + +&spi0 { + status = "okay"; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <10000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x80000>; + read-only; + }; + + partition@80000 { + label = "u-boot-env"; + reg = <0x80000 0x10000>; + read-only; + }; + + partition@90000 { + label = "u-boot-env2"; + reg = <0x90000 0x10000>; + }; + + partition@a0000 { + label = "jffs2_cfg"; + reg = <0xa0000 0x100000>; + read-only; + }; + + partition@1a0000 { + label = "jffs2_log"; + reg = <0x1a0000 0x100000>; + read-only; + }; + + /* + * use 2x OS partitions in OpenWrt + * + * 0x2A0000-0x94FFFF: RUNTIME + * 0x950000-0xFFFFFF: RUNTIME2 (not used in stock) + */ + partition@2a0000 { + compatible = "openwrt,uimage", "denx,uimage"; + label = "firmware"; + reg = <0x2a0000 0xd60000>; + openwrt,ih-magic = <0x83800013>; + }; + }; + }; +}; + +ðernet0 { + mdio-bus { + compatible = "realtek,rtl838x-mdio"; + regmap = <ðernet0>; + #address-cells = <1>; + #size-cells = <0>; + + EXTERNAL_PHY(0) + EXTERNAL_PHY(1) + EXTERNAL_PHY(2) + EXTERNAL_PHY(3) + EXTERNAL_PHY(4) + EXTERNAL_PHY(5) + EXTERNAL_PHY(6) + EXTERNAL_PHY(7) + + INTERNAL_PHY(8) + INTERNAL_PHY(9) + INTERNAL_PHY(10) + INTERNAL_PHY(11) + INTERNAL_PHY(12) + INTERNAL_PHY(13) + INTERNAL_PHY(14) + INTERNAL_PHY(15) + + EXTERNAL_PHY(16) + EXTERNAL_PHY(17) + EXTERNAL_PHY(18) + EXTERNAL_PHY(19) + EXTERNAL_PHY(20) + EXTERNAL_PHY(21) + EXTERNAL_PHY(22) + EXTERNAL_PHY(23) + }; +}; + +&switch0 { + ports { + #address-cells = <1>; + #size-cells = <0>; + + SWITCH_PORT(0, 1, qsgmii) + SWITCH_PORT(1, 2, qsgmii) + SWITCH_PORT(2, 3, qsgmii) + SWITCH_PORT(3, 4, qsgmii) + SWITCH_PORT(4, 5, qsgmii) + SWITCH_PORT(5, 6, qsgmii) + SWITCH_PORT(6, 7, qsgmii) + SWITCH_PORT(7, 8, qsgmii) + + SWITCH_PORT(8, 9, internal) + SWITCH_PORT(9, 10, internal) + SWITCH_PORT(10, 11, internal) + SWITCH_PORT(11, 12, internal) + SWITCH_PORT(12, 13, internal) + SWITCH_PORT(13, 14, internal) + SWITCH_PORT(14, 15, internal) + SWITCH_PORT(15, 16, internal) + + SWITCH_PORT(16, 17, qsgmii) + SWITCH_PORT(17, 18, qsgmii) + SWITCH_PORT(18, 19, qsgmii) + SWITCH_PORT(19, 20, qsgmii) + SWITCH_PORT(20, 21, qsgmii) + SWITCH_PORT(21, 22, qsgmii) + SWITCH_PORT(22, 23, qsgmii) + SWITCH_PORT(23, 24, qsgmii) + + port@28 { + ethernet = <ðernet0>; + reg = <28>; + phy-mode = "internal"; + + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + }; +}; diff --git a/target/linux/realtek/dts/rtl8382_panasonic_m16eg-pn28160k.dts b/target/linux/realtek/dts/rtl8382_panasonic_m16eg-pn28160k.dts new file mode 100644 index 0000000000..abbfd60085 --- /dev/null +++ b/target/linux/realtek/dts/rtl8382_panasonic_m16eg-pn28160k.dts @@ -0,0 +1,169 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT + +#include "rtl838x.dtsi" +#include "rtl83xx_panasonic_mxxeg-pn28xx0k.dtsi" + +#include + +/ { + compatible = "panasonic,m16eg-pn28160k", "realtek,rtl8382-soc"; + model = "Panasonic Switch-M16eG PN28160K"; + + aliases { + led-boot = &led_status_eco_green; + led-failsafe = &led_status_eco_amber; + led-running = &led_status_eco_green; + led-upgrade = &led_status_eco_green; + }; + + /* + * sfp0/1 are "combo" port with each TP port (23/24), and they are + * connected to the RTL8218FB. Currently, there is no support for + * the chip and only TP ports work by the RTL8218D support. + */ + sfp0: sfp-p23 { + compatible = "sff,sfp"; + i2c-bus = <&i2c0>; + tx-fault-gpio = <&gpio1 0 GPIO_ACTIVE_HIGH>; + tx-disable-gpio = <&gpio1 1 GPIO_ACTIVE_HIGH>; + mod-def0-gpio = <&gpio1 2 GPIO_ACTIVE_LOW>; + los-gpio = <&gpio1 3 GPIO_ACTIVE_HIGH>; + }; + + sfp1: sfp-p24 { + compatible = "sff,sfp"; + i2c-bus = <&i2c1>; + tx-fault-gpio = <&gpio1 4 GPIO_ACTIVE_HIGH>; + tx-disable-gpio = <&gpio1 5 GPIO_ACTIVE_HIGH>; + mod-def0-gpio = <&gpio1 6 GPIO_ACTIVE_LOW>; + los-gpio = <&gpio1 7 GPIO_ACTIVE_HIGH>; + }; +}; + +&leds { + led_status_eco_amber: led-5 { + gpios = <&gpio2 1 GPIO_ACTIVE_LOW>; + color = ; + function = LED_FUNCTION_STATUS; + function-enumerator = <1>; + }; + + led_status_eco_green: led-6 { + gpios = <&gpio2 2 GPIO_ACTIVE_LOW>; + color = ; + function = LED_FUNCTION_STATUS; + function-enumerator = <2>; + }; +}; + +&i2c_gpio_0 { + scl-gpios = <&gpio0 0 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + sda-gpios = <&gpio0 1 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; +}; + +&i2c_gpio_1 { + scl-gpios = <&gpio0 12 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + sda-gpios = <&gpio0 13 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; +}; + +&gpio2 { + interrupt-controller; + #interrupt-cells = <2>; + interrupt-parent = <&gpio0>; + interrupts = <2 IRQ_TYPE_EDGE_FALLING>; + + /* + * GPIO12 (IO1_4): RTL8218FB + * + * This GPIO pin should be specified as "reset-gpio" in mdio node, but + * RTL8218FB phy won't be configured on RTL8218D support in the current + * phy driver. So, ethernet ports on the phy will be broken after hard- + * resetting. + * (RTL8218FB phy will be detected as RTL8218D by the phy driver) + * At the moment, configure this GPIO pin as gpio-hog to avoid breaking + * by resetting. + */ + ext_switch_reset { + gpio-hog; + gpios = <12 GPIO_ACTIVE_HIGH>; + output-high; + line-name = "ext-switch-reset"; + }; +}; + +&i2c_switch { + i2c0: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + + i2c1: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; +}; + +ðernet0 { + mdio-bus { + compatible = "realtek,rtl838x-mdio"; + #address-cells = <1>; + #size-cells = <0>; + + INTERNAL_PHY(8) + INTERNAL_PHY(9) + INTERNAL_PHY(10) + INTERNAL_PHY(11) + INTERNAL_PHY(12) + INTERNAL_PHY(13) + INTERNAL_PHY(14) + INTERNAL_PHY(15) + + /* RTL8218FB */ + EXTERNAL_PHY(16) + EXTERNAL_PHY(17) + EXTERNAL_PHY(18) + EXTERNAL_PHY(19) + EXTERNAL_PHY(20) + EXTERNAL_PHY(21) + EXTERNAL_PHY(22) + EXTERNAL_PHY(23) + }; +}; + +&switch0 { + ports { + #address-cells = <1>; + #size-cells = <0>; + + SWITCH_PORT(8, 1, internal) + SWITCH_PORT(9, 2, internal) + SWITCH_PORT(10, 3, internal) + SWITCH_PORT(11, 4, internal) + SWITCH_PORT(12, 5, internal) + SWITCH_PORT(13, 6, internal) + SWITCH_PORT(14, 7, internal) + SWITCH_PORT(15, 8, internal) + + SWITCH_PORT(16, 9, qsgmii) + SWITCH_PORT(17, 10, qsgmii) + SWITCH_PORT(18, 11, qsgmii) + SWITCH_PORT(19, 12, qsgmii) + SWITCH_PORT(20, 13, qsgmii) + SWITCH_PORT(21, 14, qsgmii) + SWITCH_PORT(22, 15, qsgmii) + SWITCH_PORT(23, 16, qsgmii) + + port@28 { + ethernet = <ðernet0>; + reg = <28>; + phy-mode = "internal"; + + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + }; +}; diff --git a/target/linux/realtek/dts/rtl8382_panasonic_m24eg-pn28240k.dts b/target/linux/realtek/dts/rtl8382_panasonic_m24eg-pn28240k.dts new file mode 100644 index 0000000000..d01352ec56 --- /dev/null +++ b/target/linux/realtek/dts/rtl8382_panasonic_m24eg-pn28240k.dts @@ -0,0 +1,188 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT + +#include "rtl838x.dtsi" +#include "rtl83xx_panasonic_mxxeg-pn28xx0k.dtsi" + +#include + +/ { + compatible = "panasonic,m24eg-pn28240k", "realtek,rtl8382-soc"; + model = "Panasonic Switch-M24eG PN28240K"; + + aliases { + led-boot = &led_status_eco_green; + led-failsafe = &led_status_eco_amber; + led-running = &led_status_eco_green; + led-upgrade = &led_status_eco_green; + }; + + /* + * sfp0/1 are "combo" port with each TP port (23/24), and they are + * connected to the RTL8218FB. Currently, there is no support for + * the chip and only TP ports work by the RTL8218D support. + */ + sfp0: sfp-p23 { + compatible = "sff,sfp"; + i2c-bus = <&i2c0>; + tx-fault-gpio = <&gpio1 0 GPIO_ACTIVE_HIGH>; + tx-disable-gpio = <&gpio1 1 GPIO_ACTIVE_HIGH>; + mod-def0-gpio = <&gpio1 2 GPIO_ACTIVE_LOW>; + los-gpio = <&gpio1 3 GPIO_ACTIVE_HIGH>; + }; + + sfp1: sfp-p24 { + compatible = "sff,sfp"; + i2c-bus = <&i2c1>; + tx-fault-gpio = <&gpio1 4 GPIO_ACTIVE_HIGH>; + tx-disable-gpio = <&gpio1 5 GPIO_ACTIVE_HIGH>; + mod-def0-gpio = <&gpio1 6 GPIO_ACTIVE_LOW>; + los-gpio = <&gpio1 7 GPIO_ACTIVE_HIGH>; + }; +}; + +&leds { + led_status_eco_amber: led-5 { + gpios = <&gpio2 1 GPIO_ACTIVE_LOW>; + color = ; + function = LED_FUNCTION_STATUS; + function-enumerator = <1>; + }; + + led_status_eco_green: led-6 { + gpios = <&gpio2 2 GPIO_ACTIVE_LOW>; + color = ; + function = LED_FUNCTION_STATUS; + function-enumerator = <2>; + }; +}; + +&i2c_gpio_0 { + scl-gpios = <&gpio0 0 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + sda-gpios = <&gpio0 1 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; +}; + +&i2c_gpio_1 { + scl-gpios = <&gpio0 12 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + sda-gpios = <&gpio0 13 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; +}; + +&gpio2 { + interrupt-controller; + #interrupt-cells = <2>; + interrupt-parent = <&gpio0>; + interrupts = <2 IRQ_TYPE_EDGE_FALLING>; + + /* + * GPIO12 (IO1_4): RTL8218B + RTL8218FB + * + * This GPIO pin should be specified as "reset-gpio" in mdio node, + * but the current configuration of RTL8218B phy in the phy driver + * seems to be incomplete and RTL8218FB phy won't be configured on + * RTL8218D support. So, ethernet ports on these phys will be broken + * after hard-resetting. + * (RTL8218FB phy will be detected as RTL8218D by the phy driver) + * At the moment, configure this GPIO pin as gpio-hog to avoid breaking + * by resetting. + */ + ext_switch_reset { + gpio-hog; + gpios = <12 GPIO_ACTIVE_HIGH>; + output-high; + line-name = "ext-switch-reset"; + }; +}; + +&i2c_switch { + i2c0: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + + i2c1: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; +}; + +ðernet0 { + mdio-bus { + compatible = "realtek,rtl838x-mdio"; + #address-cells = <1>; + #size-cells = <0>; + + EXTERNAL_PHY(0) + EXTERNAL_PHY(1) + EXTERNAL_PHY(2) + EXTERNAL_PHY(3) + EXTERNAL_PHY(4) + EXTERNAL_PHY(5) + EXTERNAL_PHY(6) + EXTERNAL_PHY(7) + + INTERNAL_PHY(8) + INTERNAL_PHY(9) + INTERNAL_PHY(10) + INTERNAL_PHY(11) + INTERNAL_PHY(12) + INTERNAL_PHY(13) + INTERNAL_PHY(14) + INTERNAL_PHY(15) + + /* RTL8218FB */ + EXTERNAL_PHY(16) + EXTERNAL_PHY(17) + EXTERNAL_PHY(18) + EXTERNAL_PHY(19) + EXTERNAL_PHY(20) + EXTERNAL_PHY(21) + EXTERNAL_PHY(22) + EXTERNAL_PHY(23) + }; +}; + +&switch0 { + ports { + #address-cells = <1>; + #size-cells = <0>; + + SWITCH_PORT(0, 1, qsgmii) + SWITCH_PORT(1, 2, qsgmii) + SWITCH_PORT(2, 3, qsgmii) + SWITCH_PORT(3, 4, qsgmii) + SWITCH_PORT(4, 5, qsgmii) + SWITCH_PORT(5, 6, qsgmii) + SWITCH_PORT(6, 7, qsgmii) + SWITCH_PORT(7, 8, qsgmii) + + SWITCH_PORT(8, 9, internal) + SWITCH_PORT(9, 10, internal) + SWITCH_PORT(10, 11, internal) + SWITCH_PORT(11, 12, internal) + SWITCH_PORT(12, 13, internal) + SWITCH_PORT(13, 14, internal) + SWITCH_PORT(14, 15, internal) + SWITCH_PORT(15, 16, internal) + + SWITCH_PORT(16, 17, qsgmii) + SWITCH_PORT(17, 18, qsgmii) + SWITCH_PORT(18, 19, qsgmii) + SWITCH_PORT(19, 20, qsgmii) + SWITCH_PORT(20, 21, qsgmii) + SWITCH_PORT(21, 22, qsgmii) + SWITCH_PORT(22, 23, qsgmii) + SWITCH_PORT(23, 24, qsgmii) + + port@28 { + ethernet = <ðernet0>; + reg = <28>; + phy-mode = "internal"; + + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + }; +}; diff --git a/target/linux/realtek/dts/rtl8382_tplink_t1600g-28ts-v3.dts b/target/linux/realtek/dts/rtl8382_tplink_t1600g-28ts-v3.dts new file mode 100644 index 0000000000..d84987d209 --- /dev/null +++ b/target/linux/realtek/dts/rtl8382_tplink_t1600g-28ts-v3.dts @@ -0,0 +1,174 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT + +#include "rtl838x.dtsi" + +#include +#include +#include + +/ { + compatible = "tplink,t1600g-28ts-v3", "realtek,rtl838x-soc"; + model = "TP-Link T1600G-28TS v3"; + + aliases { + led-boot = &led_sys; + led-failsafe = &led_sys; + led-running = &led_sys; + led-upgrade = &led_sys; + label-mac-device = ðernet0; + }; + + chosen { + stdout-path = "serial0:38400n8"; + }; + + leds { + pinctrl-names = "default"; + compatible = "gpio-leds"; + + led_sys: led-0 { + gpios = <&gpio0 0 GPIO_ACTIVE_HIGH>; + color = ; + function = LED_FUNCTION_STATUS; + }; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x10000000>; + }; +}; + +&spi0 { + status = "okay"; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <10000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "u-boot"; + reg = <0x0 0xe0000>; + read-only; + }; + partition@e0000 { + label = "u-boot-env"; + reg = <0xe0000 0x20000>; + }; + partition@100000 { + compatible = "denx,uimage"; + label = "firmware"; + reg = <0x100000 0x1a00000>; + }; + partition@1b00000 { + label = "usrappfs"; + reg = <0x1b00000 0x400000>; + }; + partition@1f00000 { + label = "para"; + reg = <0x1f00000 0x100000>; + read-only; + + nvmem-layout { + compatible = "fixed-layout"; + #address-cells = <1>; + #size-cells = <1>; + + factory_macaddr: macaddr@fdff4 { + reg = <0xfdff4 0x6>; + }; + }; + }; + }; + }; +}; + +ðernet0 { + nvmem-cells = <&factory_macaddr>; + nvmem-cell-names = "mac-address"; + + mdio-bus { + compatible = "realtek,rtl838x-mdio"; + regmap = <ðernet0>; + #address-cells = <1>; + #size-cells = <0>; + + EXTERNAL_PHY(0) + EXTERNAL_PHY(1) + EXTERNAL_PHY(2) + EXTERNAL_PHY(3) + EXTERNAL_PHY(4) + EXTERNAL_PHY(5) + EXTERNAL_PHY(6) + EXTERNAL_PHY(7) + + INTERNAL_PHY(8) + INTERNAL_PHY(9) + INTERNAL_PHY(10) + INTERNAL_PHY(11) + INTERNAL_PHY(12) + INTERNAL_PHY(13) + INTERNAL_PHY(14) + INTERNAL_PHY(15) + + EXTERNAL_PHY(16) + EXTERNAL_PHY(17) + EXTERNAL_PHY(18) + EXTERNAL_PHY(19) + EXTERNAL_PHY(20) + EXTERNAL_PHY(21) + EXTERNAL_PHY(22) + EXTERNAL_PHY(23) + }; +}; + +&switch0 { + ports { + #address-cells = <1>; + #size-cells = <0>; + + SWITCH_PORT(0, 1, qsgmii) + SWITCH_PORT(1, 2, qsgmii) + SWITCH_PORT(2, 3, qsgmii) + SWITCH_PORT(3, 4, qsgmii) + SWITCH_PORT(4, 5, qsgmii) + SWITCH_PORT(5, 6, qsgmii) + SWITCH_PORT(6, 7, qsgmii) + SWITCH_PORT(7, 8, qsgmii) + + SWITCH_PORT(8, 9, internal) + SWITCH_PORT(9, 10, internal) + SWITCH_PORT(10, 11, internal) + SWITCH_PORT(11, 12, internal) + SWITCH_PORT(12, 13, internal) + SWITCH_PORT(13, 14, internal) + SWITCH_PORT(14, 15, internal) + SWITCH_PORT(15, 16, internal) + + SWITCH_PORT(16, 17, qsgmii) + SWITCH_PORT(17, 18, qsgmii) + SWITCH_PORT(18, 19, qsgmii) + SWITCH_PORT(19, 20, qsgmii) + SWITCH_PORT(20, 21, qsgmii) + SWITCH_PORT(21, 22, qsgmii) + SWITCH_PORT(22, 23, qsgmii) + SWITCH_PORT(23, 24, qsgmii) + + port@28 { + ethernet = <ðernet0>; + reg = <28>; + phy-mode = "internal"; + + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + }; +}; diff --git a/target/linux/realtek/dts/rtl8382_zyxel_gs1900-16.dts b/target/linux/realtek/dts/rtl8382_zyxel_gs1900-16.dts new file mode 100644 index 0000000000..6010da2e26 --- /dev/null +++ b/target/linux/realtek/dts/rtl8382_zyxel_gs1900-16.dts @@ -0,0 +1,36 @@ +// SPDX-License-Identifier: GPL-2.0-or-later + +#include "rtl8380_zyxel_gs1900.dtsi" + +/ { + compatible = "zyxel,gs1900-16", "realtek,rtl838x-soc"; + model = "Zyxel GS1900-16"; +}; + +&mdio { + EXTERNAL_PHY(16) + EXTERNAL_PHY(17) + EXTERNAL_PHY(18) + EXTERNAL_PHY(19) + EXTERNAL_PHY(20) + EXTERNAL_PHY(21) + EXTERNAL_PHY(22) + EXTERNAL_PHY(23) +}; + +&switch0 { + ports { + SWITCH_PORT(16, 9, qsgmii) + SWITCH_PORT(17, 10, qsgmii) + SWITCH_PORT(18, 11, qsgmii) + SWITCH_PORT(19, 12, qsgmii) + SWITCH_PORT(20, 13, qsgmii) + SWITCH_PORT(21, 14, qsgmii) + SWITCH_PORT(22, 15, qsgmii) + SWITCH_PORT(23, 16, qsgmii) + }; +}; + +&gpio1 { + /delete-node/ poe_enable; +}; diff --git a/target/linux/realtek/dts/rtl8382_zyxel_gs1900-24-v1.dts b/target/linux/realtek/dts/rtl8382_zyxel_gs1900-24-v1.dts new file mode 100644 index 0000000000..6d98e7fae1 --- /dev/null +++ b/target/linux/realtek/dts/rtl8382_zyxel_gs1900-24-v1.dts @@ -0,0 +1,128 @@ +// SPDX-License-Identifier: GPL-2.0-or-later + +#include "rtl8380_zyxel_gs1900.dtsi" + +/ { + compatible = "zyxel,gs1900-24-v1", "realtek,rtl838x-soc"; + model = "Zyxel GS1900-24 v1"; + + memory@0 { + reg = <0x0 0x4000000>; + }; + + /* i2c of the left SFP cage: port 25 */ + i2c0: i2c-gpio-0 { + compatible = "i2c-gpio"; + sda-gpios = <&gpio1 24 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + scl-gpios = <&gpio1 25 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + i2c-gpio,delay-us = <2>; + #address-cells = <1>; + #size-cells = <0>; + }; + + sfp0: sfp-p25 { + compatible = "sff,sfp"; + i2c-bus = <&i2c0>; + los-gpio = <&gpio1 27 GPIO_ACTIVE_HIGH>; + tx-fault-gpio = <&gpio1 22 GPIO_ACTIVE_HIGH>; + mod-def0-gpio = <&gpio1 26 GPIO_ACTIVE_LOW>; + tx-disable-gpio = <&gpio1 23 GPIO_ACTIVE_HIGH>; + }; + + /* i2c of the right SFP cage: port 26 */ + i2c1: i2c-gpio-1 { + compatible = "i2c-gpio"; + sda-gpios = <&gpio1 30 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + scl-gpios = <&gpio1 31 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + i2c-gpio,delay-us = <2>; + #address-cells = <1>; + #size-cells = <0>; + }; + + sfp1: sfp-p26 { + compatible = "sff,sfp"; + i2c-bus = <&i2c1>; + los-gpio = <&gpio1 33 GPIO_ACTIVE_HIGH>; + tx-fault-gpio = <&gpio1 28 GPIO_ACTIVE_HIGH>; + mod-def0-gpio = <&gpio1 32 GPIO_ACTIVE_LOW>; + tx-disable-gpio = <&gpio1 29 GPIO_ACTIVE_HIGH>; + }; +}; + +&uart1 { + status = "okay"; +}; + +&mdio { + EXTERNAL_PHY(0) + EXTERNAL_PHY(1) + EXTERNAL_PHY(2) + EXTERNAL_PHY(3) + EXTERNAL_PHY(4) + EXTERNAL_PHY(5) + EXTERNAL_PHY(6) + EXTERNAL_PHY(7) + + EXTERNAL_PHY(16) + EXTERNAL_PHY(17) + EXTERNAL_PHY(18) + EXTERNAL_PHY(19) + EXTERNAL_PHY(20) + EXTERNAL_PHY(21) + EXTERNAL_PHY(22) + EXTERNAL_PHY(23) + + INTERNAL_PHY(24) + INTERNAL_PHY(26) +}; + +&switch0 { + ports { + SWITCH_PORT(0, 1, qsgmii) + SWITCH_PORT(1, 2, qsgmii) + SWITCH_PORT(2, 3, qsgmii) + SWITCH_PORT(3, 4, qsgmii) + SWITCH_PORT(4, 5, qsgmii) + SWITCH_PORT(5, 6, qsgmii) + SWITCH_PORT(6, 7, qsgmii) + SWITCH_PORT(7, 8, qsgmii) + + SWITCH_PORT(8, 9, internal) + SWITCH_PORT(9, 10, internal) + SWITCH_PORT(10, 11, internal) + SWITCH_PORT(11, 12, internal) + SWITCH_PORT(12, 13, internal) + SWITCH_PORT(13, 14, internal) + SWITCH_PORT(14, 15, internal) + SWITCH_PORT(15, 16, internal) + + SWITCH_PORT(16, 17, qsgmii) + SWITCH_PORT(17, 18, qsgmii) + SWITCH_PORT(18, 19, qsgmii) + SWITCH_PORT(19, 20, qsgmii) + SWITCH_PORT(20, 21, qsgmii) + SWITCH_PORT(21, 22, qsgmii) + SWITCH_PORT(22, 23, qsgmii) + SWITCH_PORT(23, 24, qsgmii) + + port@24 { + reg = <24>; + label = "lan25"; + phy-mode = "1000base-x"; + managed = "in-band-status"; + sfp = <&sfp0>; + }; + + port@26 { + reg = <26>; + label = "lan26"; + phy-mode = "1000base-x"; + managed = "in-band-status"; + sfp = <&sfp1>; + }; + }; +}; + +&gpio1 { + /delete-node/ poe_enable; +}; diff --git a/target/linux/realtek/dts/rtl8382_zyxel_gs1900-24e.dts b/target/linux/realtek/dts/rtl8382_zyxel_gs1900-24e.dts new file mode 100644 index 0000000000..b455ddf23a --- /dev/null +++ b/target/linux/realtek/dts/rtl8382_zyxel_gs1900-24e.dts @@ -0,0 +1,63 @@ +// SPDX-License-Identifier: GPL-2.0-or-later + +#include "rtl8380_zyxel_gs1900.dtsi" + +/ { + compatible = "zyxel,gs1900-24e", "realtek,rtl838x-soc"; + model = "Zyxel GS1900-24E"; +}; + +&mdio { + EXTERNAL_PHY(0) + EXTERNAL_PHY(1) + EXTERNAL_PHY(2) + EXTERNAL_PHY(3) + EXTERNAL_PHY(4) + EXTERNAL_PHY(5) + EXTERNAL_PHY(6) + EXTERNAL_PHY(7) + + EXTERNAL_PHY(16) + EXTERNAL_PHY(17) + EXTERNAL_PHY(18) + EXTERNAL_PHY(19) + EXTERNAL_PHY(20) + EXTERNAL_PHY(21) + EXTERNAL_PHY(22) + EXTERNAL_PHY(23) +}; + +&switch0 { + ports { + SWITCH_PORT(1, 1, qsgmii) + SWITCH_PORT(0, 2, qsgmii) + SWITCH_PORT(3, 3, qsgmii) + SWITCH_PORT(2, 4, qsgmii) + SWITCH_PORT(5, 5, qsgmii) + SWITCH_PORT(4, 6, qsgmii) + SWITCH_PORT(7, 7, qsgmii) + SWITCH_PORT(6, 8, qsgmii) + + SWITCH_PORT(9, 9, internal) + SWITCH_PORT(8, 10, internal) + SWITCH_PORT(11, 11, internal) + SWITCH_PORT(10, 12, internal) + SWITCH_PORT(13, 13, internal) + SWITCH_PORT(12, 14, internal) + SWITCH_PORT(15, 15, internal) + SWITCH_PORT(14, 16, internal) + + SWITCH_PORT(17, 17, qsgmii) + SWITCH_PORT(16, 18, qsgmii) + SWITCH_PORT(19, 19, qsgmii) + SWITCH_PORT(18, 20, qsgmii) + SWITCH_PORT(21, 21, qsgmii) + SWITCH_PORT(20, 22, qsgmii) + SWITCH_PORT(23, 23, qsgmii) + SWITCH_PORT(22, 24, qsgmii) + }; +}; + +&gpio1 { + /delete-node/ poe_enable; +}; diff --git a/target/linux/realtek/dts/rtl8382_zyxel_gs1900-24ep.dts b/target/linux/realtek/dts/rtl8382_zyxel_gs1900-24ep.dts new file mode 100644 index 0000000000..25c82f089e --- /dev/null +++ b/target/linux/realtek/dts/rtl8382_zyxel_gs1900-24ep.dts @@ -0,0 +1,63 @@ +// SPDX-License-Identifier: GPL-2.0-or-later + +#include "rtl8380_zyxel_gs1900.dtsi" + +/ { + compatible = "zyxel,gs1900-24ep", "realtek,rtl838x-soc"; + model = "Zyxel GS1900-24EP Switch"; +}; + +&uart1 { + status = "okay"; +}; + +&mdio { + EXTERNAL_PHY(0) + EXTERNAL_PHY(1) + EXTERNAL_PHY(2) + EXTERNAL_PHY(3) + EXTERNAL_PHY(4) + EXTERNAL_PHY(5) + EXTERNAL_PHY(6) + EXTERNAL_PHY(7) + + EXTERNAL_PHY(16) + EXTERNAL_PHY(17) + EXTERNAL_PHY(18) + EXTERNAL_PHY(19) + EXTERNAL_PHY(20) + EXTERNAL_PHY(21) + EXTERNAL_PHY(22) + EXTERNAL_PHY(23) +}; + +&switch0 { + ports { + SWITCH_PORT(0, 1, qsgmii) + SWITCH_PORT(1, 2, qsgmii) + SWITCH_PORT(2, 3, qsgmii) + SWITCH_PORT(3, 4, qsgmii) + SWITCH_PORT(4, 5, qsgmii) + SWITCH_PORT(5, 6, qsgmii) + SWITCH_PORT(6, 7, qsgmii) + SWITCH_PORT(7, 8, qsgmii) + + SWITCH_PORT(8, 9, internal) + SWITCH_PORT(9, 10, internal) + SWITCH_PORT(10, 11, internal) + SWITCH_PORT(11, 12, internal) + SWITCH_PORT(12, 13, internal) + SWITCH_PORT(13, 14, internal) + SWITCH_PORT(14, 15, internal) + SWITCH_PORT(15, 16, internal) + + SWITCH_PORT(16, 17, qsgmii) + SWITCH_PORT(17, 18, qsgmii) + SWITCH_PORT(18, 19, qsgmii) + SWITCH_PORT(19, 20, qsgmii) + SWITCH_PORT(20, 21, qsgmii) + SWITCH_PORT(21, 22, qsgmii) + SWITCH_PORT(22, 23, qsgmii) + SWITCH_PORT(23, 24, qsgmii) + }; +}; diff --git a/target/linux/realtek/dts/rtl8382_zyxel_gs1900-24hp-v1.dts b/target/linux/realtek/dts/rtl8382_zyxel_gs1900-24hp-v1.dts new file mode 100644 index 0000000000..fa9bef89d6 --- /dev/null +++ b/target/linux/realtek/dts/rtl8382_zyxel_gs1900-24hp-v1.dts @@ -0,0 +1,125 @@ +// SPDX-License-Identifier: GPL-2.0-or-later + +#include "rtl8380_zyxel_gs1900.dtsi" + +/ { + compatible = "zyxel,gs1900-24hp-v1", "realtek,rtl838x-soc"; + model = "Zyxel GS1900-24HP v1"; + + memory@0 { + reg = <0x0 0x4000000>; + }; + + /* i2c of the left SFP cage: port 25 */ + i2c0: i2c-gpio-0 { + compatible = "i2c-gpio"; + sda-gpios = <&gpio1 24 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + scl-gpios = <&gpio1 25 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + i2c-gpio,delay-us = <2>; + #address-cells = <1>; + #size-cells = <0>; + }; + + sfp0: sfp-p25 { + compatible = "sff,sfp"; + i2c-bus = <&i2c0>; + los-gpio = <&gpio1 27 GPIO_ACTIVE_HIGH>; + tx-fault-gpio = <&gpio1 22 GPIO_ACTIVE_HIGH>; + mod-def0-gpio = <&gpio1 26 GPIO_ACTIVE_LOW>; + tx-disable-gpio = <&gpio1 23 GPIO_ACTIVE_HIGH>; + }; + + /* i2c of the right SFP cage: port 26 */ + i2c1: i2c-gpio-1 { + compatible = "i2c-gpio"; + sda-gpios = <&gpio1 30 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + scl-gpios = <&gpio1 31 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + i2c-gpio,delay-us = <2>; + #address-cells = <1>; + #size-cells = <0>; + }; + + sfp1: sfp-p26 { + compatible = "sff,sfp"; + i2c-bus = <&i2c1>; + los-gpio = <&gpio1 33 GPIO_ACTIVE_HIGH>; + tx-fault-gpio = <&gpio1 28 GPIO_ACTIVE_HIGH>; + mod-def0-gpio = <&gpio1 32 GPIO_ACTIVE_LOW>; + tx-disable-gpio = <&gpio1 29 GPIO_ACTIVE_HIGH>; + }; +}; + +&uart1 { + status = "okay"; +}; + +&mdio { + EXTERNAL_PHY(0) + EXTERNAL_PHY(1) + EXTERNAL_PHY(2) + EXTERNAL_PHY(3) + EXTERNAL_PHY(4) + EXTERNAL_PHY(5) + EXTERNAL_PHY(6) + EXTERNAL_PHY(7) + + EXTERNAL_PHY(16) + EXTERNAL_PHY(17) + EXTERNAL_PHY(18) + EXTERNAL_PHY(19) + EXTERNAL_PHY(20) + EXTERNAL_PHY(21) + EXTERNAL_PHY(22) + EXTERNAL_PHY(23) + + INTERNAL_PHY(24) + INTERNAL_PHY(26) +}; + +&switch0 { + ports { + SWITCH_PORT(0, 1, qsgmii) + SWITCH_PORT(1, 2, qsgmii) + SWITCH_PORT(2, 3, qsgmii) + SWITCH_PORT(3, 4, qsgmii) + SWITCH_PORT(4, 5, qsgmii) + SWITCH_PORT(5, 6, qsgmii) + SWITCH_PORT(6, 7, qsgmii) + SWITCH_PORT(7, 8, qsgmii) + + SWITCH_PORT(8, 9, internal) + SWITCH_PORT(9, 10, internal) + SWITCH_PORT(10, 11, internal) + SWITCH_PORT(11, 12, internal) + SWITCH_PORT(12, 13, internal) + SWITCH_PORT(13, 14, internal) + SWITCH_PORT(14, 15, internal) + SWITCH_PORT(15, 16, internal) + + SWITCH_PORT(16, 17, qsgmii) + SWITCH_PORT(17, 18, qsgmii) + SWITCH_PORT(18, 19, qsgmii) + SWITCH_PORT(19, 20, qsgmii) + SWITCH_PORT(20, 21, qsgmii) + SWITCH_PORT(21, 22, qsgmii) + SWITCH_PORT(22, 23, qsgmii) + SWITCH_PORT(23, 24, qsgmii) + + port@24 { + reg = <24>; + label = "lan25"; + phy-mode = "1000base-x"; + managed = "in-band-status"; + sfp = <&sfp0>; + }; + + port@26 { + reg = <26>; + label = "lan26"; + phy-mode = "1000base-x"; + managed = "in-band-status"; + sfp = <&sfp1>; + }; + }; +}; + diff --git a/target/linux/realtek/dts/rtl8382_zyxel_gs1900-24hp-v2.dts b/target/linux/realtek/dts/rtl8382_zyxel_gs1900-24hp-v2.dts new file mode 100644 index 0000000000..93011cbdaa --- /dev/null +++ b/target/linux/realtek/dts/rtl8382_zyxel_gs1900-24hp-v2.dts @@ -0,0 +1,121 @@ +// SPDX-License-Identifier: GPL-2.0-or-later + +#include "rtl8380_zyxel_gs1900.dtsi" + +/ { + compatible = "zyxel,gs1900-24hp-v2", "realtek,rtl838x-soc"; + model = "Zyxel GS1900-24HP v2 Switch"; + + /* i2c of the left SFP cage: port 25 */ + i2c0: i2c-gpio-0 { + compatible = "i2c-gpio"; + sda-gpios = <&gpio1 24 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + scl-gpios = <&gpio1 25 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + i2c-gpio,delay-us = <2>; + #address-cells = <1>; + #size-cells = <0>; + }; + + sfp0: sfp-p25 { + compatible = "sff,sfp"; + i2c-bus = <&i2c0>; + los-gpio = <&gpio1 27 GPIO_ACTIVE_HIGH>; + tx-fault-gpio = <&gpio1 22 GPIO_ACTIVE_HIGH>; + mod-def0-gpio = <&gpio1 26 GPIO_ACTIVE_LOW>; + tx-disable-gpio = <&gpio1 23 GPIO_ACTIVE_HIGH>; + }; + + /* i2c of the right SFP cage: port 26 */ + i2c1: i2c-gpio-1 { + compatible = "i2c-gpio"; + sda-gpios = <&gpio1 30 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + scl-gpios = <&gpio1 31 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + i2c-gpio,delay-us = <2>; + #address-cells = <1>; + #size-cells = <0>; + }; + + sfp1: sfp-p26 { + compatible = "sff,sfp"; + i2c-bus = <&i2c1>; + los-gpio = <&gpio1 33 GPIO_ACTIVE_HIGH>; + tx-fault-gpio = <&gpio1 28 GPIO_ACTIVE_HIGH>; + mod-def0-gpio = <&gpio1 32 GPIO_ACTIVE_LOW>; + tx-disable-gpio = <&gpio1 29 GPIO_ACTIVE_HIGH>; + }; +}; + +&uart1 { + status = "okay"; +}; + +&mdio { + EXTERNAL_PHY(0) + EXTERNAL_PHY(1) + EXTERNAL_PHY(2) + EXTERNAL_PHY(3) + EXTERNAL_PHY(4) + EXTERNAL_PHY(5) + EXTERNAL_PHY(6) + EXTERNAL_PHY(7) + + EXTERNAL_PHY(16) + EXTERNAL_PHY(17) + EXTERNAL_PHY(18) + EXTERNAL_PHY(19) + EXTERNAL_PHY(20) + EXTERNAL_PHY(21) + EXTERNAL_PHY(22) + EXTERNAL_PHY(23) + + INTERNAL_PHY(24) + INTERNAL_PHY(26) +}; + +&switch0 { + ports { + SWITCH_PORT(0, 1, qsgmii) + SWITCH_PORT(1, 2, qsgmii) + SWITCH_PORT(2, 3, qsgmii) + SWITCH_PORT(3, 4, qsgmii) + SWITCH_PORT(4, 5, qsgmii) + SWITCH_PORT(5, 6, qsgmii) + SWITCH_PORT(6, 7, qsgmii) + SWITCH_PORT(7, 8, qsgmii) + + SWITCH_PORT(8, 9, internal) + SWITCH_PORT(9, 10, internal) + SWITCH_PORT(10, 11, internal) + SWITCH_PORT(11, 12, internal) + SWITCH_PORT(12, 13, internal) + SWITCH_PORT(13, 14, internal) + SWITCH_PORT(14, 15, internal) + SWITCH_PORT(15, 16, internal) + + SWITCH_PORT(16, 17, qsgmii) + SWITCH_PORT(17, 18, qsgmii) + SWITCH_PORT(18, 19, qsgmii) + SWITCH_PORT(19, 20, qsgmii) + SWITCH_PORT(20, 21, qsgmii) + SWITCH_PORT(21, 22, qsgmii) + SWITCH_PORT(22, 23, qsgmii) + SWITCH_PORT(23, 24, qsgmii) + + + port@24 { + reg = <24>; + label = "lan25"; + phy-mode = "1000base-x"; + managed = "in-band-status"; + sfp = <&sfp0>; + }; + + port@26 { + reg = <26>; + label = "lan26"; + phy-mode = "1000base-x"; + managed = "in-band-status"; + sfp = <&sfp1>; + }; + }; +}; diff --git a/target/linux/realtek/dts/rtl838x.dtsi b/target/linux/realtek/dts/rtl838x.dtsi new file mode 100644 index 0000000000..13ba6450b2 --- /dev/null +++ b/target/linux/realtek/dts/rtl838x.dtsi @@ -0,0 +1,293 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT + +#include + +/dts-v1/; + +#define STRINGIZE(s) #s +#define LAN_LABEL(p, s) STRINGIZE(p ## s) +#define SWITCH_PORT_LABEL(n) LAN_LABEL(lan, n) + +#define INTERNAL_PHY(n) \ + phy##n: ethernet-phy@##n { \ + reg = <##n>; \ + compatible = "ethernet-phy-ieee802.3-c22"; \ + phy-is-integrated; \ + }; + +#define EXTERNAL_PHY(n) \ + phy##n: ethernet-phy@##n { \ + reg = <##n>; \ + compatible = "ethernet-phy-ieee802.3-c22"; \ + }; + +#define EXTERNAL_SFP_PHY(n) \ + phy##n: ethernet-phy@##n { \ + compatible = "ethernet-phy-ieee802.3-c22"; \ + sfp; \ + media = "fibre"; \ + reg = <##n>; \ + }; + +#define EXTERNAL_SFP_PHY_FULL(n, s) \ + phy##n: ethernet-phy@##n { \ + compatible = "ethernet-phy-ieee802.3-c22"; \ + sfp = <&sfp##s>; \ + reg = <##n>; \ + }; + +#define SWITCH_PORT(n, s, m) \ + port##n: port@##n { \ + reg = <##n>; \ + label = SWITCH_PORT_LABEL(s) ; \ + phy-handle = <&phy##n>; \ + phy-mode = #m ; \ + }; + +#define SWITCH_SFP_PORT(n, s, m) \ + port##n: port@##n { \ + reg = <##n>; \ + label = SWITCH_PORT_LABEL(s) ; \ + phy-handle = <&phy##n>; \ + phy-mode = #m ; \ + fixed-link { \ + speed = <1000>; \ + full-duplex; \ + }; \ + }; + +/ { + #address-cells = <1>; + #size-cells = <1>; + + compatible = "realtek,rtl838x-soc"; + + osc: oscillator { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <25000000>; + }; + + ccu: clock-controller { + compatible = "realtek,rtl8380-clock"; + #clock-cells = <1>; + clocks = <&osc>; + clock-names = "ref_clk"; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + compatible = "mips,mips4KEc"; + reg = <0>; + clocks = <&ccu CLK_CPU>; + operating-points-v2 = <&cpu_opp_table>; + }; + }; + + cpu_opp_table: opp-table-0 { + compatible = "operating-points-v2"; + opp-shared; + + opp00 { + opp-hz = /bits/ 64 <325000000>; + }; + opp01 { + opp-hz = /bits/ 64 <350000000>; + }; + opp02 { + opp-hz = /bits/ 64 <375000000>; + }; + opp03 { + opp-hz = /bits/ 64 <400000000>; + }; + opp04 { + opp-hz = /bits/ 64 <425000000>; + }; + opp05 { + opp-hz = /bits/ 64 <450000000>; + }; + opp06 { + opp-hz = /bits/ 64 <475000000>; + }; + opp07 { + opp-hz = /bits/ 64 <500000000>; + }; + }; + + aliases { + serial0 = &uart0; + serial1 = &uart1; + }; + + chosen { + bootargs = "earlycon"; + stdout-path = "serial0:115200n8"; + }; + + cpuintc: cpuintc { + compatible = "mti,cpu-interrupt-controller"; + #address-cells = <0>; + #interrupt-cells = <1>; + interrupt-controller; + }; + + soc: soc { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x18000000 0x10000>; + + intc: interrupt-controller@3000 { + compatible = "realtek,rtl8380-intc", "realtek,rtl-intc"; + reg = <0x3000 0x18>; + interrupt-controller; + #interrupt-cells = <2>; + + interrupt-parent = <&cpuintc>; + interrupts = <2>, <3>, <4>, <5>, <6>; + }; + + spi0: spi@1200 { + compatible = "realtek,rtl8380-spi"; + reg = <0x1200 0x100>; + + #address-cells = <1>; + #size-cells = <0>; + }; + + timer0: timer@3100 { + compatible = "realtek,rtl8380-timer", "realtek,otto-timer"; + reg = <0x3100 0x10>, <0x3110 0x10>, <0x3120 0x10>, + <0x3130 0x10>, <0x3140 0x10>; + + interrupt-parent = <&intc>; + interrupts = <29 4>, <28 4>, <17 4>, <16 4>, <15 4>; + clocks = <&ccu CLK_LXB>; + }; + + uart0: uart@2000 { + compatible = "ns16550a"; + reg = <0x2000 0x100>; + + clocks = <&ccu CLK_LXB>; + + interrupt-parent = <&intc>; + interrupts = <31 1>; + + reg-io-width = <1>; + reg-shift = <2>; + fifo-size = <1>; + no-loopback-test; + }; + + uart1: uart@2100 { + pinctrl-names = "default"; + pinctrl-0 = <&enable_uart1>; + + compatible = "ns16550a"; + reg = <0x2100 0x100>; + + clocks = <&ccu CLK_LXB>; + + interrupt-parent = <&intc>; + interrupts = <30 0>; + + reg-io-width = <1>; + reg-shift = <2>; + fifo-size = <1>; + no-loopback-test; + + status = "disabled"; + }; + + watchdog0: watchdog@3150 { + compatible = "realtek,rtl8380-wdt"; + reg = <0x3150 0xc>; + + realtek,reset-mode = "soc"; + + clocks = <&ccu CLK_LXB>; + timeout-sec = <30>; + + interrupt-parent = <&intc>; + interrupt-names = "phase1", "phase2"; + interrupts = <19 3>, <18 4>; + }; + + gpio0: gpio-controller@3500 { + compatible = "realtek,rtl8380-gpio", "realtek,otto-gpio"; + reg = <0x3500 0x20>; + + gpio-controller; + #gpio-cells = <2>; + ngpios = <24>; + + interrupt-controller; + #interrupt-cells = <2>; + interrupt-parent = <&intc>; + interrupts = <23 3>; + }; + }; + + pinmux: pinmux@1b001000 { + compatible = "pinctrl-single"; + reg = <0x1b001000 0x4>; + + pinctrl-single,bit-per-mux; + pinctrl-single,register-width = <32>; + pinctrl-single,function-mask = <0x1>; + #pinctrl-cells = <2>; + + enable_uart1: pinmux_enable_uart1 { + pinctrl-single,bits = <0x0 0x10 0x10>; + }; + }; + + /* LED_GLB_CTRL */ + pinmux_led: pinmux@1b00a000 { + compatible = "pinctrl-single"; + reg = <0x1b00a000 0x4>; + + pinctrl-single,bit-per-mux; + pinctrl-single,register-width = <32>; + pinctrl-single,function-mask = <0x1>; + #pinctrl-cells = <2>; + + /* enable GPIO 0 */ + pinmux_disable_sys_led: disable_sys_led { + pinctrl-single,bits = <0x0 0x0 0x8000>; + }; + }; + + ethernet0: ethernet@1b00a300 { + compatible = "realtek,rtl838x-eth"; + reg = <0x1b00a300 0x100>; + interrupt-parent = <&intc>; + interrupts = <24 3>; + #interrupt-cells = <1>; + phy-mode = "internal"; + + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + + sram0: sram@9f000000 { + compatible = "mmio-sram"; + reg = <0x9f000000 0x10000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x9f000000 0x10000>; + }; + + switch0: switch@1b000000 { + compatible = "realtek,rtl83xx-switch"; + + interrupt-parent = <&intc>; + interrupts = <20 2>; + }; +}; diff --git a/target/linux/realtek/dts/rtl838x_hpe_1920.dtsi b/target/linux/realtek/dts/rtl838x_hpe_1920.dtsi new file mode 100644 index 0000000000..c7b6013117 --- /dev/null +++ b/target/linux/realtek/dts/rtl838x_hpe_1920.dtsi @@ -0,0 +1,96 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT + +#include +#include + +/ { + chosen { + stdout-path = "serial0:38400n8"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x8000000>; + }; + + watchdog1: watchdog { + // PT7A7514 + compatible = "linux,wdt-gpio"; + gpios = <&gpio0 0 GPIO_ACTIVE_HIGH>; + hw_algo = "toggle"; + hw_margin_ms = <1000>; + always-running; + + pinctrl-names = "default"; + pinctrl-0 = <&pinmux_disable_sys_led>; + }; +}; + +&watchdog0 { + status = "disabled"; +}; + +&spi0 { + status = "okay"; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <50000000>; + m25p,fast-read; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "bootware_basic"; + reg = <0x0 0x50000>; + read-only; + }; + + partition@60000 { + label = "bootware_data"; + reg = <0x60000 0x30000>; + read-only; + }; + + partition@90000 { + label = "bootware_extend"; + reg = <0x90000 0x40000>; + read-only; + }; + + partition@100000 { + label = "bootware_basic_backup"; + reg = <0x100000 0x50000>; + read-only; + }; + + partition@160000 { + label = "bootware_data_backup"; + reg = <0x160000 0x30000>; + read-only; + }; + + partition@190000 { + label = "bootware_extend_backup"; + reg = <0x190000 0x40000>; + read-only; + }; + + partition@300000 { + label = "firmware"; + compatible = "h3c,vfs-firmware"; + reg = <0x300000 0x1cf0000>; + }; + + partition@1ff0000 { + label = "factory"; + reg = <0x1ff0000 0x10000>; + read-only; + }; + }; + }; +}; diff --git a/target/linux/realtek/dts/rtl8393_d-link_dgs-1210-52.dts b/target/linux/realtek/dts/rtl8393_d-link_dgs-1210-52.dts new file mode 100644 index 0000000000..5b876e7c43 --- /dev/null +++ b/target/linux/realtek/dts/rtl8393_d-link_dgs-1210-52.dts @@ -0,0 +1,163 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT + +#include "rtl839x.dtsi" +#include "rtl83xx_d-link_dgs-1210_common.dtsi" +#include "rtl83xx_d-link_dgs-1210_gpio.dtsi" +#include "rtl839x_d-link_dgs-1210_gpio.dtsi" + +/ { + compatible = "d-link,dgs-1210-52", "realtek,rtl8393-soc"; + model = "D-Link DGS-1210-52"; +}; + +ðernet0 { + mdio: mdio-bus { + compatible = "realtek,rtl838x-mdio"; + regmap = <ðernet0>; + #address-cells = <1>; + #size-cells = <0>; + + /* External phy RTL8218B #1 */ + EXTERNAL_PHY(0) + EXTERNAL_PHY(1) + EXTERNAL_PHY(2) + EXTERNAL_PHY(3) + EXTERNAL_PHY(4) + EXTERNAL_PHY(5) + EXTERNAL_PHY(6) + EXTERNAL_PHY(7) + + /* External phy RTL8218B #2 */ + EXTERNAL_PHY(8) + EXTERNAL_PHY(9) + EXTERNAL_PHY(10) + EXTERNAL_PHY(11) + EXTERNAL_PHY(12) + EXTERNAL_PHY(13) + EXTERNAL_PHY(14) + EXTERNAL_PHY(15) + + /* External phy RTL8218B #3 */ + EXTERNAL_PHY(16) + EXTERNAL_PHY(17) + EXTERNAL_PHY(18) + EXTERNAL_PHY(19) + EXTERNAL_PHY(20) + EXTERNAL_PHY(21) + EXTERNAL_PHY(22) + EXTERNAL_PHY(23) + + /* External phy RTL8218B #4 */ + EXTERNAL_PHY(24) + EXTERNAL_PHY(25) + EXTERNAL_PHY(26) + EXTERNAL_PHY(27) + EXTERNAL_PHY(28) + EXTERNAL_PHY(29) + EXTERNAL_PHY(30) + EXTERNAL_PHY(31) + + /* External phy RTL8218B #5 */ + EXTERNAL_PHY(32) + EXTERNAL_PHY(33) + EXTERNAL_PHY(34) + EXTERNAL_PHY(35) + EXTERNAL_PHY(36) + EXTERNAL_PHY(37) + EXTERNAL_PHY(38) + EXTERNAL_PHY(39) + + /* External phy RTL8218B #6 */ + EXTERNAL_PHY(40) + EXTERNAL_PHY(41) + EXTERNAL_PHY(42) + EXTERNAL_PHY(43) + EXTERNAL_PHY(44) + EXTERNAL_PHY(45) + EXTERNAL_PHY(46) + EXTERNAL_PHY(47) + + /* External phy RTL8214FC */ + EXTERNAL_SFP_PHY_FULL(48, 0) + EXTERNAL_SFP_PHY_FULL(49, 1) + EXTERNAL_SFP_PHY_FULL(50, 2) + EXTERNAL_SFP_PHY_FULL(51, 3) + }; +}; + +&switch0 { + ports { + #address-cells = <1>; + #size-cells = <0>; + + SWITCH_PORT(0, 1, qsgmii) + SWITCH_PORT(1, 2, qsgmii) + SWITCH_PORT(2, 3, qsgmii) + SWITCH_PORT(3, 4, qsgmii) + SWITCH_PORT(4, 5, qsgmii) + SWITCH_PORT(5, 6, qsgmii) + SWITCH_PORT(6, 7, qsgmii) + SWITCH_PORT(7, 8, qsgmii) + + SWITCH_PORT(8, 9, qsgmii) + SWITCH_PORT(9, 10, qsgmii) + SWITCH_PORT(10, 11, qsgmii) + SWITCH_PORT(11, 12, qsgmii) + SWITCH_PORT(12, 13, qsgmii) + SWITCH_PORT(13, 14, qsgmii) + SWITCH_PORT(14, 15, qsgmii) + SWITCH_PORT(15, 16, qsgmii) + + SWITCH_PORT(16, 17, qsgmii) + SWITCH_PORT(17, 18, qsgmii) + SWITCH_PORT(18, 19, qsgmii) + SWITCH_PORT(19, 20, qsgmii) + SWITCH_PORT(20, 21, qsgmii) + SWITCH_PORT(21, 22, qsgmii) + SWITCH_PORT(22, 23, qsgmii) + SWITCH_PORT(23, 24, qsgmii) + + SWITCH_PORT(24, 25, qsgmii) + SWITCH_PORT(25, 26, qsgmii) + SWITCH_PORT(26, 27, qsgmii) + SWITCH_PORT(27, 28, qsgmii) + SWITCH_PORT(28, 29, qsgmii) + SWITCH_PORT(29, 30, qsgmii) + SWITCH_PORT(30, 31, qsgmii) + SWITCH_PORT(31, 32, qsgmii) + + SWITCH_PORT(32, 33, qsgmii) + SWITCH_PORT(33, 34, qsgmii) + SWITCH_PORT(34, 35, qsgmii) + SWITCH_PORT(35, 36, qsgmii) + SWITCH_PORT(36, 37, qsgmii) + SWITCH_PORT(37, 38, qsgmii) + SWITCH_PORT(38, 39, qsgmii) + SWITCH_PORT(39, 40, qsgmii) + + SWITCH_PORT(40, 41, qsgmii) + SWITCH_PORT(41, 42, qsgmii) + SWITCH_PORT(42, 43, qsgmii) + SWITCH_PORT(43, 44, qsgmii) + SWITCH_PORT(44, 45, qsgmii) + SWITCH_PORT(45, 46, qsgmii) + SWITCH_PORT(46, 47, qsgmii) + SWITCH_PORT(47, 48, qsgmii) + + SWITCH_PORT(48, 49, qsgmii) + SWITCH_PORT(49, 50, qsgmii) + SWITCH_PORT(50, 51, qsgmii) + SWITCH_PORT(51, 52, qsgmii) + + /* CPU-Port */ + port@52 { + ethernet = <ðernet0>; + reg = <52>; + phy-mode = "qsgmii"; + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + }; +}; diff --git a/target/linux/realtek/dts/rtl8393_netgear_gs750e.dts b/target/linux/realtek/dts/rtl8393_netgear_gs750e.dts new file mode 100644 index 0000000000..5a7ed276bf --- /dev/null +++ b/target/linux/realtek/dts/rtl8393_netgear_gs750e.dts @@ -0,0 +1,253 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT + +#include "rtl839x.dtsi" + +#include +#include + +/ { + compatible = "netgear,gs750e", "realtek,rtl8393-soc"; + model = "Netgear GS750E"; + + aliases { + label-mac-device = ðernet0; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x8000000>; + }; + + keys { + compatible = "gpio-keys"; + + reset { + label = "reset"; + gpios = <&gpio0 11 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + }; + + gpio-restart { + compatible = "gpio-restart"; + gpios = <&gpio0 10 GPIO_ACTIVE_LOW>; + }; + + virtual_flash { + compatible = "mtd-concat"; + + devices = <&fwconcat0>, <&fwconcat1>, <&fwconcat2>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "firmware"; + reg = <0x0 0x760000>; + compatible = "openwrt,uimage", "denx,uimage"; + openwrt,ih-magic = <0x174e4741>; + }; + }; + }; +}; + +&spi0 { + status = "okay"; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <10000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x80000>; + read-only; + }; + + partition@80000 { + label = "u-boot-env"; + reg = <0x80000 0x10000>; + read-only; + }; + + partition@90000 { + label = "u-boot-env2"; + reg = <0x90000 0x10000>; + read-only; + }; + + fwconcat1: partition@a0000 { + label = "jffs2_cfg"; + reg = <0xa0000 0x80000>; + }; + + fwconcat2: partition@120000 { + label = "jffs2_log"; + reg = <0x120000 0x80000>; + }; + + fwconcat0: partition@1a0000 { + label = "runtime"; + reg = <0x1a0000 0x660000>; + }; + }; + }; +}; + +ðernet0 { + mdio: mdio-bus { + compatible = "realtek,rtl838x-mdio"; + #address-cells = <1>; + #size-cells = <0>; + // Switch doesn't come back properly after a reset so don't. + // reset-gpios = <&gpio0 23 GPIO_ACTIVE_LOW>; + + /* External phy RTL8218B #1 */ + EXTERNAL_PHY(0) + EXTERNAL_PHY(1) + EXTERNAL_PHY(2) + EXTERNAL_PHY(3) + EXTERNAL_PHY(4) + EXTERNAL_PHY(5) + EXTERNAL_PHY(6) + EXTERNAL_PHY(7) + + /* External phy RTL8218B #2 */ + EXTERNAL_PHY(8) + EXTERNAL_PHY(9) + EXTERNAL_PHY(10) + EXTERNAL_PHY(11) + EXTERNAL_PHY(12) + EXTERNAL_PHY(13) + EXTERNAL_PHY(14) + EXTERNAL_PHY(15) + + /* External phy RTL8218B #3 */ + EXTERNAL_PHY(16) + EXTERNAL_PHY(17) + EXTERNAL_PHY(18) + EXTERNAL_PHY(19) + EXTERNAL_PHY(20) + EXTERNAL_PHY(21) + EXTERNAL_PHY(22) + EXTERNAL_PHY(23) + + /* External phy RTL8218B #4 */ + EXTERNAL_PHY(24) + EXTERNAL_PHY(25) + EXTERNAL_PHY(26) + EXTERNAL_PHY(27) + EXTERNAL_PHY(28) + EXTERNAL_PHY(29) + EXTERNAL_PHY(30) + EXTERNAL_PHY(31) + + /* External phy RTL8218B #5 */ + EXTERNAL_PHY(32) + EXTERNAL_PHY(33) + EXTERNAL_PHY(34) + EXTERNAL_PHY(35) + EXTERNAL_PHY(36) + EXTERNAL_PHY(37) + EXTERNAL_PHY(38) + EXTERNAL_PHY(39) + + /* External phy RTL8218B #6 */ + EXTERNAL_PHY(40) + EXTERNAL_PHY(41) + EXTERNAL_PHY(42) + EXTERNAL_PHY(43) + EXTERNAL_PHY(44) + EXTERNAL_PHY(45) + EXTERNAL_PHY(46) + EXTERNAL_PHY(47) + + /* RTL8393 Internal SerDes */ + INTERNAL_PHY(48) + INTERNAL_PHY(49) + }; +}; + +&switch0 { + ports { + #address-cells = <1>; + #size-cells = <0>; + + SWITCH_PORT(0, 1, qsgmii) + SWITCH_PORT(1, 2, qsgmii) + SWITCH_PORT(2, 3, qsgmii) + SWITCH_PORT(3, 4, qsgmii) + SWITCH_PORT(4, 5, qsgmii) + SWITCH_PORT(5, 6, qsgmii) + SWITCH_PORT(6, 7, qsgmii) + SWITCH_PORT(7, 8, qsgmii) + + SWITCH_PORT(8, 9, qsgmii) + SWITCH_PORT(9, 10, qsgmii) + SWITCH_PORT(10, 11, qsgmii) + SWITCH_PORT(11, 12, qsgmii) + SWITCH_PORT(12, 13, qsgmii) + SWITCH_PORT(13, 14, qsgmii) + SWITCH_PORT(14, 15, qsgmii) + SWITCH_PORT(15, 16, qsgmii) + + SWITCH_PORT(16, 17, qsgmii) + SWITCH_PORT(17, 18, qsgmii) + SWITCH_PORT(18, 19, qsgmii) + SWITCH_PORT(19, 20, qsgmii) + SWITCH_PORT(20, 21, qsgmii) + SWITCH_PORT(21, 22, qsgmii) + SWITCH_PORT(22, 23, qsgmii) + SWITCH_PORT(23, 24, qsgmii) + + SWITCH_PORT(24, 25, qsgmii) + SWITCH_PORT(25, 26, qsgmii) + SWITCH_PORT(26, 27, qsgmii) + SWITCH_PORT(27, 28, qsgmii) + SWITCH_PORT(28, 29, qsgmii) + SWITCH_PORT(29, 30, qsgmii) + SWITCH_PORT(30, 31, qsgmii) + SWITCH_PORT(31, 32, qsgmii) + + SWITCH_PORT(32, 33, qsgmii) + SWITCH_PORT(33, 34, qsgmii) + SWITCH_PORT(34, 35, qsgmii) + SWITCH_PORT(35, 36, qsgmii) + SWITCH_PORT(36, 37, qsgmii) + SWITCH_PORT(37, 38, qsgmii) + SWITCH_PORT(38, 39, qsgmii) + SWITCH_PORT(39, 40, qsgmii) + + SWITCH_PORT(40, 41, qsgmii) + SWITCH_PORT(41, 42, qsgmii) + SWITCH_PORT(42, 43, qsgmii) + SWITCH_PORT(43, 44, qsgmii) + SWITCH_PORT(44, 45, qsgmii) + SWITCH_PORT(45, 46, qsgmii) + SWITCH_PORT(46, 47, qsgmii) + SWITCH_PORT(47, 48, qsgmii) + + /* SFP cages */ + SWITCH_SFP_PORT(48, 49, sgmii) + SWITCH_SFP_PORT(49, 50, sgmii) + + /* CPU-Port */ + port@52 { + ethernet = <ðernet0>; + reg = <52>; + phy-mode = "qsgmii"; + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + }; +}; diff --git a/target/linux/realtek/dts/rtl8393_panasonic_m48eg-pn28480k.dts b/target/linux/realtek/dts/rtl8393_panasonic_m48eg-pn28480k.dts new file mode 100644 index 0000000000..8e7d32de1c --- /dev/null +++ b/target/linux/realtek/dts/rtl8393_panasonic_m48eg-pn28480k.dts @@ -0,0 +1,378 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT + +#include "rtl839x.dtsi" +#include "rtl83xx_panasonic_mxxeg-pn28xx0k.dtsi" + +#include + +/ { + compatible = "panasonic,m48eg-pn28480k", "realtek,rtl8393-soc"; + model = "Panasonic Switch-M48eG PN28480K"; + + aliases { + led-boot = &led_status_eco_green; + led-failsafe = &led_status_eco_amber; + led-running = &led_status_eco_green; + led-upgrade = &led_status_eco_green; + }; + + fan: gpio-fan { + compatible = "gpio-fan"; + gpios = <&gpio0 19 GPIO_ACTIVE_HIGH>; + /* the actual speeds (rpm) are unknown, just use dummy values */ + gpio-fan,speed-map = <1 0>, <2 1>; + #cooling-cells = <2>; + }; + + /* + * sfp0/1/2/3 are "combo" port with each TP port (45/46/47/48), + * and they are connected to the RTL8218FB. Currently, there is + * no support for the chip and only TP ports work by the RTL8218B + * support. + */ + sfp0: sfp-p45 { + compatible = "sff,sfp"; + i2c-bus = <&i2c0>; + tx-fault-gpio = <&gpio1 0 GPIO_ACTIVE_HIGH>; + tx-disable-gpio = <&gpio1 1 GPIO_ACTIVE_HIGH>; + mod-def0-gpio = <&gpio1 2 GPIO_ACTIVE_LOW>; + los-gpio = <&gpio1 3 GPIO_ACTIVE_HIGH>; + }; + + sfp1: sfp-p46 { + compatible = "sff,sfp"; + i2c-bus = <&i2c1>; + tx-fault-gpio = <&gpio1 4 GPIO_ACTIVE_HIGH>; + tx-disable-gpio = <&gpio1 5 GPIO_ACTIVE_HIGH>; + mod-def0-gpio = <&gpio1 6 GPIO_ACTIVE_LOW>; + los-gpio = <&gpio1 7 GPIO_ACTIVE_HIGH>; + }; + + sfp2: sfp-p47 { + compatible = "sff,sfp"; + i2c-bus = <&i2c2>; + tx-fault-gpio = <&gpio1 8 GPIO_ACTIVE_HIGH>; + tx-disable-gpio = <&gpio1 9 GPIO_ACTIVE_HIGH>; + mod-def0-gpio = <&gpio1 10 GPIO_ACTIVE_LOW>; + los-gpio = <&gpio1 11 GPIO_ACTIVE_HIGH>; + }; + + sfp3: sfp-p48 { + compatible = "sff,sfp"; + i2c-bus = <&i2c3>; + tx-fault-gpio = <&gpio1 12 GPIO_ACTIVE_HIGH>; + tx-disable-gpio = <&gpio1 13 GPIO_ACTIVE_HIGH>; + mod-def0-gpio = <&gpio1 14 GPIO_ACTIVE_LOW>; + los-gpio = <&gpio1 15 GPIO_ACTIVE_HIGH>; + }; + + thermal-zones { + /* + * Zone for SoC temperature + * + * Fan speed: + * + * - 0-44 celsius: Low + * - 45-54 celsius: High + */ + cpu-thermal { + polling-delay-passive = <1000>; + polling-delay = <2000>; + + thermal-sensors = <&tsens_soc>; + + trips { + cpu_alert: trip-point { + temperature = <45000>; + hysteresis = <4000>; + type = "active"; + }; + + cpu_crit { + temperature = <55000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + + cooling-maps { + map { + trip = <&cpu_alert>; + cooling-device = <&fan 0 1>; + }; + }; + }; + + /* + * Zone for system temperature + * + * Fan speed: + * + * - 0-39 celsius: Low + * - 40-49 celsius: High + * + * Note: official recommended ranges of temperature on each + * fan speed setting: + * + * - Low speed : 0-40 celsius + * - High speed: 0-50 celsius + * + * (stock firmware doesn't support auto-selection of + * speed and need to be selected manually by user) + */ + sys-thermal { + polling-delay-passive = <1000>; + polling-delay = <2000>; + + thermal-sensors = <&tsens_sys>; + + trips { + sys_alert: trip-point { + temperature = <40000>; + hysteresis = <4000>; + type = "active"; + }; + + sys_crit { + temperature = <50000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + + cooling-maps { + map { + trip = <&sys_alert>; + cooling-device = <&fan 0 1>; + }; + }; + }; + }; +}; + +&leds { + led_status_eco_amber: led-5 { + gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>; + color = ; + function = LED_FUNCTION_STATUS; + function-enumerator = <1>; + }; + + led_status_eco_green: led-6 { + gpios = <&gpio2 2 GPIO_ACTIVE_HIGH>; + color = ; + function = LED_FUNCTION_STATUS; + function-enumerator = <2>; + }; +}; + +&i2c_gpio_0 { + scl-gpios = <&gpio0 16 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + sda-gpios = <&gpio0 17 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + + /* Microchip TCN75A (for SoC) */ + tsens_soc: sensor@48 { + compatible = "microchip,tcn75"; + reg = <0x48>; + #thermal-sensor-cells = <0>; + }; + + /* Microchip TCN75A (for System) */ + tsens_sys: sensor@49 { + compatible = "microchip,tcn75"; + reg = <0x49>; + #thermal-sensor-cells = <0>; + }; +}; + +&i2c_gpio_1 { + scl-gpios = <&gpio0 14 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + sda-gpios = <&gpio0 15 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; +}; + +&gpio2 { + interrupt-controller; + #interrupt-cells = <2>; + interrupt-parent = <&gpio0>; + interrupts = <18 IRQ_TYPE_EDGE_FALLING>; + + /* + * GPIO12 (IO1_4): 5x RTL8218B + RTL8218FB + * + * This GPIO pin should be specified as "reset-gpio" in mdio node, + * but the current configuration of RTL8218B phy in the phy driver + * seems to be incomplete and RTL8218FB phy won't be configured on + * RTL8218D support. So, ethernet ports on these phys will be broken + * after hard-resetting. + * (RTL8218FB phy will be detected as RTL8218D by the phy driver) + * At the moment, configure this GPIO pin as gpio-hog to avoid breaking + * by resetting. + */ + ext_switch_reset { + gpio-hog; + gpios = <12 GPIO_ACTIVE_HIGH>; + output-high; + line-name = "ext-switch-reset"; + }; +}; + +&i2c_switch { + i2c0: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + + i2c1: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + + i2c2: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + }; + + i2c3: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + }; +}; + +ðernet0 { + mdio-bus { + compatible = "realtek,rtl838x-mdio"; + #address-cells = <1>; + #size-cells = <0>; + + EXTERNAL_PHY(0) + EXTERNAL_PHY(1) + EXTERNAL_PHY(2) + EXTERNAL_PHY(3) + EXTERNAL_PHY(4) + EXTERNAL_PHY(5) + EXTERNAL_PHY(6) + EXTERNAL_PHY(7) + + EXTERNAL_PHY(8) + EXTERNAL_PHY(9) + EXTERNAL_PHY(10) + EXTERNAL_PHY(11) + EXTERNAL_PHY(12) + EXTERNAL_PHY(13) + EXTERNAL_PHY(14) + EXTERNAL_PHY(15) + + EXTERNAL_PHY(16) + EXTERNAL_PHY(17) + EXTERNAL_PHY(18) + EXTERNAL_PHY(19) + EXTERNAL_PHY(20) + EXTERNAL_PHY(21) + EXTERNAL_PHY(22) + EXTERNAL_PHY(23) + + EXTERNAL_PHY(24) + EXTERNAL_PHY(25) + EXTERNAL_PHY(26) + EXTERNAL_PHY(27) + EXTERNAL_PHY(28) + EXTERNAL_PHY(29) + EXTERNAL_PHY(30) + EXTERNAL_PHY(31) + + EXTERNAL_PHY(32) + EXTERNAL_PHY(33) + EXTERNAL_PHY(34) + EXTERNAL_PHY(35) + EXTERNAL_PHY(36) + EXTERNAL_PHY(37) + EXTERNAL_PHY(38) + EXTERNAL_PHY(39) + + /* RTL8218FB */ + EXTERNAL_PHY(40) + EXTERNAL_PHY(41) + EXTERNAL_PHY(42) + EXTERNAL_PHY(43) + EXTERNAL_PHY(44) + EXTERNAL_PHY(45) + EXTERNAL_PHY(46) + EXTERNAL_PHY(47) + }; +}; + +&switch0 { + ports { + #address-cells = <1>; + #size-cells = <0>; + + SWITCH_PORT(0, 1, qsgmii) + SWITCH_PORT(1, 2, qsgmii) + SWITCH_PORT(2, 3, qsgmii) + SWITCH_PORT(3, 4, qsgmii) + SWITCH_PORT(4, 5, qsgmii) + SWITCH_PORT(5, 6, qsgmii) + SWITCH_PORT(6, 7, qsgmii) + SWITCH_PORT(7, 8, qsgmii) + + SWITCH_PORT(8, 9, qsgmii) + SWITCH_PORT(9, 10, qsgmii) + SWITCH_PORT(10, 11, qsgmii) + SWITCH_PORT(11, 12, qsgmii) + SWITCH_PORT(12, 13, qsgmii) + SWITCH_PORT(13, 14, qsgmii) + SWITCH_PORT(14, 15, qsgmii) + SWITCH_PORT(15, 16, qsgmii) + + SWITCH_PORT(16, 17, qsgmii) + SWITCH_PORT(17, 18, qsgmii) + SWITCH_PORT(18, 19, qsgmii) + SWITCH_PORT(19, 20, qsgmii) + SWITCH_PORT(20, 21, qsgmii) + SWITCH_PORT(21, 22, qsgmii) + SWITCH_PORT(22, 23, qsgmii) + SWITCH_PORT(23, 24, qsgmii) + + SWITCH_PORT(24, 25, qsgmii) + SWITCH_PORT(25, 26, qsgmii) + SWITCH_PORT(26, 27, qsgmii) + SWITCH_PORT(27, 28, qsgmii) + SWITCH_PORT(28, 29, qsgmii) + SWITCH_PORT(29, 30, qsgmii) + SWITCH_PORT(30, 31, qsgmii) + SWITCH_PORT(31, 32, qsgmii) + + SWITCH_PORT(32, 33, qsgmii) + SWITCH_PORT(33, 34, qsgmii) + SWITCH_PORT(34, 35, qsgmii) + SWITCH_PORT(35, 36, qsgmii) + SWITCH_PORT(36, 37, qsgmii) + SWITCH_PORT(37, 38, qsgmii) + SWITCH_PORT(38, 39, qsgmii) + SWITCH_PORT(39, 40, qsgmii) + + SWITCH_PORT(40, 41, qsgmii) + SWITCH_PORT(41, 42, qsgmii) + SWITCH_PORT(42, 43, qsgmii) + SWITCH_PORT(43, 44, qsgmii) + SWITCH_PORT(44, 45, qsgmii) + SWITCH_PORT(45, 46, qsgmii) + SWITCH_PORT(46, 47, qsgmii) + SWITCH_PORT(47, 48, qsgmii) + + port@52 { + ethernet = <ðernet0>; + reg = <52>; + phy-mode = "internal"; + + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + }; +}; diff --git a/target/linux/realtek/dts/rtl8393_tplink_sg2452p-v4.dts b/target/linux/realtek/dts/rtl8393_tplink_sg2452p-v4.dts new file mode 100644 index 0000000000..4a19d83fda --- /dev/null +++ b/target/linux/realtek/dts/rtl8393_tplink_sg2452p-v4.dts @@ -0,0 +1,419 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT + +#include "rtl839x.dtsi" + +#include +#include +#include + +/ { + compatible = "tplink,sg2452p-v4", "realtek,rtl8393-soc"; + model = "TP-Link SG2452P v4"; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x10000000>; + }; + + aliases { + led-boot = &led_sys; + led-failsafe = &led_sys; + led-running = &led_sys; + led-upgrade = &led_sys; + label-mac-device = ðernet0; + }; + + chosen { + stdout-path = "serial0:38400n8"; + }; + + keys { + compatible = "gpio-keys"; + + reset { + label = "reset"; + gpios = <&gpio0 20 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + + speed { + label = "speed"; + gpios = <&gpio0 19 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + }; + + gpio_fan_sys { + compatible = "gpio-fan"; + alarm-gpios = <&gpio0 12 GPIO_ACTIVE_LOW>; + }; + + gpio_fan_psu_1 { + pinctrl-names = "default"; + pinctrl-0 = <&disable_jtag>; + compatible = "gpio-fan"; + + alarm-gpios = <&gpio0 7 GPIO_ACTIVE_LOW>; + gpios = <&gpio0 4 GPIO_ACTIVE_LOW>; + /* the actual speeds (rpm) are unknown, just use dummy values */ + gpio-fan,speed-map = <1 0>, <2 1>; + #cooling-cells = <2>; + }; + + gpio_fan_psu_2 { + /* This fan runs in parallel to PSU1 fan, but has a separate + * alarm GPIO. This is not (yet) supported by the gpio-fan driver, + * so a separate instance is added + */ + compatible = "gpio-fan"; + alarm-gpios = <&gpio0 14 GPIO_ACTIVE_LOW>; + }; + + leds { + pinctrl-names = "default"; + compatible = "gpio-leds"; + + led-0 { + gpios = <&gpio0 8 GPIO_ACTIVE_HIGH>; + color = ; + function = LED_FUNCTION_INDICATOR; + }; + + led-1 { + gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>; + color = ; + function = LED_FUNCTION_INDICATOR; + }; + + led_sys: led-2 { + gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>; + color = ; + function = LED_FUNCTION_STATUS; + }; + + led-3 { + gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>; + color = ; + function = LED_FUNCTION_STATUS; + }; + + led-4 { + gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>; + color = ; + function = "fault-fan"; + }; + + led-5 { + gpios = <&gpio0 18 GPIO_ACTIVE_HIGH>; + color = ; + function = "alarm-poe"; + }; + }; + + i2c-gpio-0 { + compatible = "i2c-gpio"; + sda-gpios = <&gpio0 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + scl-gpios = <&gpio0 1 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + i2c-gpio,delay-us = <2>; + #address-cells = <1>; + #size-cells = <0>; + + /* LAN9 - LAN12 */ + tps23861@5 { + compatible = "ti,tps23861"; + reg = <0x05>; + }; + + /* LAN17 - LAN20 */ + tps23861@6 { + compatible = "ti,tps23861"; + reg = <0x06>; + }; + + /* LAN45 - LAN48 */ + tps23861@9 { + compatible = "ti,tps23861"; + reg = <0x09>; + }; + + /* LAN37 - LAN40 */ + tps23861@a { + compatible = "ti,tps23861"; + reg = <0x0a>; + }; + + /* LAN1 - LAN4 */ + tps23861@14 { + compatible = "ti,tps23861"; + reg = <0x14>; + }; + + /* LAN25 - LAN28 */ + tps23861@24 { + compatible = "ti,tps23861"; + reg = <0x24>; + }; + + /* LAN33 - LAN 36 */ + tps23861@25 { + compatible = "ti,tps23861"; + reg = <0x25>; + }; + + /* LAN41 - LAN44 */ + tps23861@26 { + compatible = "ti,tps23861"; + reg = <0x26>; + }; + + /* LAN13 - LAN16 */ + tps23861@29 { + compatible = "ti,tps23861"; + reg = <0x29>; + }; + + /* LAN29 - LAN32 */ + tps23861@2c { + compatible = "ti,tps23861"; + reg = <0x2c>; + }; + + /* LAN5 - LAN8 */ + tps23861@48 { + compatible = "ti,tps23861"; + reg = <0x48>; + }; + + /* LAN21 - LAN24 */ + tps23861@49 { + compatible = "ti,tps23861"; + reg = <0x49>; + }; + }; + + gpio-restart { + compatible = "gpio-restart"; + gpios = <&gpio0 17 GPIO_ACTIVE_LOW>; + }; +}; + +&gpio0 { + poe-enable { + gpio-hog; + gpios = <23 GPIO_ACTIVE_HIGH>; + output-high; + line-name = "poe-enable"; + }; +}; + +&spi0 { + status = "okay"; + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <10000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "u-boot"; + reg = <0x0 0xe0000>; + read-only; + }; + partition@e0000 { + label = "u-boot-env"; + reg = <0xe0000 0x20000>; + }; + + /* We use the "sys", "usrimg1" and "usrimg2" partitions + * as firmware since the kernel needs to be in "sys", but the + * partition is too small to hold the "rootfs" as well. + * The original partition map contains: + * + * partition@100000 { + * label = "sys"; + * reg = <0x100000 0x600000>; + * }; + * partition@700000 { + * label = "usrimg1"; + * reg = <0x700000 0xa00000>; + * }; + * partition@1100000 { + * label = "usrimg2"; + * reg = <0x1100000 0xa00000>; + * }; + */ + + partition@100000 { + label = "firmware"; + reg = <0x100000 0x1a00000>; + }; + partition@1b00000 { + label = "usrappfs"; + reg = <0x1b00000 0x400000>; + }; + partition@1f00000 { + label = "para"; + reg = <0x1f00000 0x100000>; + read-only; + + nvmem-layout { + compatible = "fixed-layout"; + #address-cells = <1>; + #size-cells = <1>; + + factory_macaddr: macaddr@fdff4 { + reg = <0xfdff4 0x6>; + }; + }; + }; + }; + }; +}; + +ðernet0 { + nvmem-cells = <&factory_macaddr>; + nvmem-cell-names = "mac-address"; + + mdio: mdio-bus { + compatible = "realtek,rtl838x-mdio"; + #address-cells = <1>; + #size-cells = <0>; + + /* External phy RTL8218B #1 */ + EXTERNAL_PHY(0) + EXTERNAL_PHY(1) + EXTERNAL_PHY(2) + EXTERNAL_PHY(3) + EXTERNAL_PHY(4) + EXTERNAL_PHY(5) + EXTERNAL_PHY(6) + EXTERNAL_PHY(7) + + /* External phy RTL8218B #2 */ + EXTERNAL_PHY(8) + EXTERNAL_PHY(9) + EXTERNAL_PHY(10) + EXTERNAL_PHY(11) + EXTERNAL_PHY(12) + EXTERNAL_PHY(13) + EXTERNAL_PHY(14) + EXTERNAL_PHY(15) + + /* External phy RTL8218B #3 */ + EXTERNAL_PHY(16) + EXTERNAL_PHY(17) + EXTERNAL_PHY(18) + EXTERNAL_PHY(19) + EXTERNAL_PHY(20) + EXTERNAL_PHY(21) + EXTERNAL_PHY(22) + EXTERNAL_PHY(23) + + /* External phy RTL8218B #4 */ + EXTERNAL_PHY(24) + EXTERNAL_PHY(25) + EXTERNAL_PHY(26) + EXTERNAL_PHY(27) + EXTERNAL_PHY(28) + EXTERNAL_PHY(29) + EXTERNAL_PHY(30) + EXTERNAL_PHY(31) + + /* External phy RTL8218B #5 */ + EXTERNAL_PHY(32) + EXTERNAL_PHY(33) + EXTERNAL_PHY(34) + EXTERNAL_PHY(35) + EXTERNAL_PHY(36) + EXTERNAL_PHY(37) + EXTERNAL_PHY(38) + EXTERNAL_PHY(39) + + /* External phy RTL8218B #6 */ + EXTERNAL_PHY(40) + EXTERNAL_PHY(41) + EXTERNAL_PHY(42) + EXTERNAL_PHY(43) + EXTERNAL_PHY(44) + EXTERNAL_PHY(45) + EXTERNAL_PHY(46) + EXTERNAL_PHY(47) + }; +}; + +&switch0 { + ports { + #address-cells = <1>; + #size-cells = <0>; + + SWITCH_PORT(0, 01, qsgmii) + SWITCH_PORT(1, 02, qsgmii) + SWITCH_PORT(2, 03, qsgmii) + SWITCH_PORT(3, 04, qsgmii) + SWITCH_PORT(4, 05, qsgmii) + SWITCH_PORT(5, 06, qsgmii) + SWITCH_PORT(6, 07, qsgmii) + SWITCH_PORT(7, 08, qsgmii) + + SWITCH_PORT(8, 09, qsgmii) + SWITCH_PORT(9, 10, qsgmii) + SWITCH_PORT(10, 11, qsgmii) + SWITCH_PORT(11, 12, qsgmii) + SWITCH_PORT(12, 13, qsgmii) + SWITCH_PORT(13, 14, qsgmii) + SWITCH_PORT(14, 15, qsgmii) + SWITCH_PORT(15, 16, qsgmii) + + SWITCH_PORT(16, 17, qsgmii) + SWITCH_PORT(17, 18, qsgmii) + SWITCH_PORT(18, 19, qsgmii) + SWITCH_PORT(19, 20, qsgmii) + SWITCH_PORT(20, 21, qsgmii) + SWITCH_PORT(21, 22, qsgmii) + SWITCH_PORT(22, 23, qsgmii) + SWITCH_PORT(23, 24, qsgmii) + + SWITCH_PORT(24, 25, qsgmii) + SWITCH_PORT(25, 26, qsgmii) + SWITCH_PORT(26, 27, qsgmii) + SWITCH_PORT(27, 28, qsgmii) + SWITCH_PORT(28, 29, qsgmii) + SWITCH_PORT(29, 30, qsgmii) + SWITCH_PORT(30, 31, qsgmii) + SWITCH_PORT(31, 32, qsgmii) + + SWITCH_PORT(32, 33, qsgmii) + SWITCH_PORT(33, 34, qsgmii) + SWITCH_PORT(34, 35, qsgmii) + SWITCH_PORT(35, 36, qsgmii) + SWITCH_PORT(36, 37, qsgmii) + SWITCH_PORT(37, 38, qsgmii) + SWITCH_PORT(38, 39, qsgmii) + SWITCH_PORT(39, 40, qsgmii) + + SWITCH_PORT(40, 41, qsgmii) + SWITCH_PORT(41, 42, qsgmii) + SWITCH_PORT(42, 43, qsgmii) + SWITCH_PORT(43, 44, qsgmii) + SWITCH_PORT(44, 45, qsgmii) + SWITCH_PORT(45, 46, qsgmii) + SWITCH_PORT(46, 47, qsgmii) + SWITCH_PORT(47, 48, qsgmii) + + /* CPU-Port */ + port@52 { + ethernet = <ðernet0>; + reg = <52>; + phy-mode = "internal"; + + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + }; +}; diff --git a/target/linux/realtek/dts/rtl8393_zyxel_gs1900-48.dts b/target/linux/realtek/dts/rtl8393_zyxel_gs1900-48.dts new file mode 100644 index 0000000000..c7ddd8313a --- /dev/null +++ b/target/linux/realtek/dts/rtl8393_zyxel_gs1900-48.dts @@ -0,0 +1,320 @@ +/dts-v1/; + +#include "rtl839x.dtsi" + +#include +#include + +/ { + compatible = "zyxel,gs1900-48", "realtek,rtl8393-soc"; + model = "Zyxel GS1900-48"; + + aliases { + led-boot = &led_sys; + led-failsafe = &led_sys; + led-running = &led_sys; + led-upgrade = &led_sys; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x8000000>; + }; + + leds { + pinctrl-names = "default"; + pinctrl-0 = <&pinmux_disable_sys_led>; + compatible = "gpio-leds"; + + led_sys: sys { + label = "green:sys"; + gpios = <&gpio0 0 GPIO_ACTIVE_HIGH>; + }; + }; + + gpio1: rtl8231-gpio { + compatible = "realtek,rtl8231-gpio"; + #gpio-cells = <2>; + indirect-access-bus-id = <3>; + gpio-controller; + }; + + gpio-restart { + compatible = "gpio-restart"; + gpios = <&gpio1 5 GPIO_ACTIVE_LOW>; + }; + + keys { + compatible = "gpio-keys-polled"; + poll-interval = <20>; + + mode { + label = "reset"; + gpios = <&gpio1 3 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + }; + + /* i2c of the left SFP cage: port 49 */ + i2c0: i2c-gpio-0 { + compatible = "i2c-gpio"; + sda-gpios = <&gpio1 24 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + scl-gpios = <&gpio1 25 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + i2c-gpio,delay-us = <2>; + #address-cells = <1>; + #size-cells = <0>; + }; + + sfp0: sfp-p9 { + compatible = "sff,sfp"; + i2c-bus = <&i2c0>; + los-gpio = <&gpio1 27 GPIO_ACTIVE_HIGH>; + tx-fault-gpio = <&gpio1 22 GPIO_ACTIVE_HIGH>; + mod-def0-gpio = <&gpio1 26 GPIO_ACTIVE_LOW>; + tx-disable-gpio = <&gpio1 23 GPIO_ACTIVE_HIGH>; + }; + + /* i2c of the right SFP cage: port 50 */ + i2c1: i2c-gpio-1 { + compatible = "i2c-gpio"; + sda-gpios = <&gpio1 30 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + scl-gpios = <&gpio1 31 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + i2c-gpio,delay-us = <2>; + #address-cells = <1>; + #size-cells = <0>; + }; + + sfp1: sfp-p10 { + compatible = "sff,sfp"; + i2c-bus = <&i2c1>; + los-gpio = <&gpio1 33 GPIO_ACTIVE_HIGH>; + tx-fault-gpio = <&gpio1 28 GPIO_ACTIVE_HIGH>; + mod-def0-gpio = <&gpio1 32 GPIO_ACTIVE_LOW>; + tx-disable-gpio = <&gpio1 29 GPIO_ACTIVE_HIGH>; + }; +}; + +&spi0 { + status = "okay"; + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <10000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x40000>; + read-only; + }; + partition@40000 { + label = "u-boot-env"; + reg = <0x40000 0x10000>; + read-only; + }; + partition@50000 { + label = "u-boot-env2"; + reg = <0x50000 0x10000>; + read-only; + }; + partition@60000 { + label = "jffs"; + reg = <0x60000 0x100000>; + }; + partition@160000 { + label = "jffs2"; + reg = <0x160000 0x100000>; + }; + partition@260000 { + label = "firmware"; + reg = <0x260000 0x6d0000>; + compatible = "openwrt,uimage", "denx,uimage"; + openwrt,ih-magic = <0x83800000>; + }; + partition@930000 { + label = "runtime2"; + reg = <0x930000 0x6d0000>; + }; + }; + }; +}; + +ðernet0 { + mdio: mdio-bus { + compatible = "realtek,rtl838x-mdio"; + regmap = <ðernet0>; + #address-cells = <1>; + #size-cells = <0>; + + /* External phy RTL8218B #1 */ + EXTERNAL_PHY(0) + EXTERNAL_PHY(1) + EXTERNAL_PHY(2) + EXTERNAL_PHY(3) + EXTERNAL_PHY(4) + EXTERNAL_PHY(5) + EXTERNAL_PHY(6) + EXTERNAL_PHY(7) + + /* External phy RTL8218B #2 */ + EXTERNAL_PHY(8) + EXTERNAL_PHY(9) + EXTERNAL_PHY(10) + EXTERNAL_PHY(11) + EXTERNAL_PHY(12) + EXTERNAL_PHY(13) + EXTERNAL_PHY(14) + EXTERNAL_PHY(15) + + /* External phy RTL8218B #3 */ + EXTERNAL_PHY(16) + EXTERNAL_PHY(17) + EXTERNAL_PHY(18) + EXTERNAL_PHY(19) + EXTERNAL_PHY(20) + EXTERNAL_PHY(21) + EXTERNAL_PHY(22) + EXTERNAL_PHY(23) + + /* External phy RTL8218B #4 */ + EXTERNAL_PHY(24) + EXTERNAL_PHY(25) + EXTERNAL_PHY(26) + EXTERNAL_PHY(27) + EXTERNAL_PHY(28) + EXTERNAL_PHY(29) + EXTERNAL_PHY(30) + EXTERNAL_PHY(31) + + /* External phy RTL8218B #5 */ + EXTERNAL_PHY(32) + EXTERNAL_PHY(33) + EXTERNAL_PHY(34) + EXTERNAL_PHY(35) + EXTERNAL_PHY(36) + EXTERNAL_PHY(37) + EXTERNAL_PHY(38) + EXTERNAL_PHY(39) + + /* External phy RTL8218B #6 */ + EXTERNAL_PHY(40) + EXTERNAL_PHY(41) + EXTERNAL_PHY(42) + EXTERNAL_PHY(43) + EXTERNAL_PHY(44) + EXTERNAL_PHY(45) + EXTERNAL_PHY(46) + EXTERNAL_PHY(47) + + /* RTL8393 Internal SerDes */ + INTERNAL_PHY(48) + INTERNAL_PHY(49) + }; +}; + +&switch0 { + ports { + #address-cells = <1>; + #size-cells = <0>; + + SWITCH_PORT(0, 01, qsgmii) + SWITCH_PORT(1, 02, qsgmii) + SWITCH_PORT(2, 03, qsgmii) + SWITCH_PORT(3, 04, qsgmii) + SWITCH_PORT(4, 05, qsgmii) + SWITCH_PORT(5, 06, qsgmii) + SWITCH_PORT(6, 07, qsgmii) + SWITCH_PORT(7, 08, qsgmii) + + SWITCH_PORT(8, 09, qsgmii) + SWITCH_PORT(9, 10, qsgmii) + SWITCH_PORT(10, 11, qsgmii) + SWITCH_PORT(11, 12, qsgmii) + SWITCH_PORT(12, 13, qsgmii) + SWITCH_PORT(13, 14, qsgmii) + SWITCH_PORT(14, 15, qsgmii) + SWITCH_PORT(15, 16, qsgmii) + + SWITCH_PORT(16, 17, qsgmii) + SWITCH_PORT(17, 18, qsgmii) + SWITCH_PORT(18, 19, qsgmii) + SWITCH_PORT(19, 20, qsgmii) + SWITCH_PORT(20, 21, qsgmii) + SWITCH_PORT(21, 22, qsgmii) + SWITCH_PORT(22, 23, qsgmii) + SWITCH_PORT(23, 24, qsgmii) + + SWITCH_PORT(24, 25, qsgmii) + SWITCH_PORT(25, 26, qsgmii) + SWITCH_PORT(26, 27, qsgmii) + SWITCH_PORT(27, 28, qsgmii) + SWITCH_PORT(28, 29, qsgmii) + SWITCH_PORT(29, 30, qsgmii) + SWITCH_PORT(30, 31, qsgmii) + SWITCH_PORT(31, 32, qsgmii) + + SWITCH_PORT(32, 33, qsgmii) + SWITCH_PORT(33, 34, qsgmii) + SWITCH_PORT(34, 35, qsgmii) + SWITCH_PORT(35, 36, qsgmii) + SWITCH_PORT(36, 37, qsgmii) + SWITCH_PORT(37, 38, qsgmii) + SWITCH_PORT(38, 39, qsgmii) + SWITCH_PORT(39, 40, qsgmii) + + SWITCH_PORT(40, 41, qsgmii) + SWITCH_PORT(41, 42, qsgmii) + SWITCH_PORT(42, 43, qsgmii) + SWITCH_PORT(43, 44, qsgmii) + SWITCH_PORT(44, 45, qsgmii) + SWITCH_PORT(45, 46, qsgmii) + SWITCH_PORT(46, 47, qsgmii) + SWITCH_PORT(47, 48, qsgmii) + + /* SFP cages */ + port@48 { + reg = <48>; + label = "lan49"; + phy-mode = "sgmii"; + phy-handle = <&phy48>; + sfp = <&sfp0>; + + fixed-link { + speed = <1000>; + full-duplex; + pause; + }; + + }; + + port@49 { + reg = <49>; + label = "lan50"; + phy-mode = "sgmii"; + phy-handle = <&phy49>; + sfp = <&sfp1>; + + fixed-link { + speed = <1000>; + full-duplex; + pause; + }; + + }; + + /* CPU-Port */ + port@52 { + ethernet = <ðernet0>; + reg = <52>; + phy-mode = "qsgmii"; + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + }; +}; diff --git a/target/linux/realtek/dts/rtl839x.dtsi b/target/linux/realtek/dts/rtl839x.dtsi new file mode 100644 index 0000000000..3f87f5622e --- /dev/null +++ b/target/linux/realtek/dts/rtl839x.dtsi @@ -0,0 +1,325 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT + +#include + +/dts-v1/; + +#define STRINGIZE(s) #s +#define LAN_LABEL(p, s) STRINGIZE(p ## s) +#define SWITCH_PORT_LABEL(n) LAN_LABEL(lan, n) + +#define INTERNAL_PHY(n) \ + phy##n: ethernet-phy@##n { \ + reg = <##n>; \ + compatible = "ethernet-phy-ieee802.3-c22"; \ + phy-is-integrated; \ + }; + +#define EXTERNAL_PHY(n) \ + phy##n: ethernet-phy@##n { \ + reg = <##n>; \ + compatible = "ethernet-phy-ieee802.3-c22"; \ + }; + +#define EXTERNAL_SFP_PHY(n) \ + phy##n: ethernet-phy@##n { \ + compatible = "ethernet-phy-ieee802.3-c22"; \ + sfp; \ + media = "fibre"; \ + reg = <##n>; \ + }; + +#define EXTERNAL_SFP_PHY_FULL(n, s) \ + phy##n: ethernet-phy@##n { \ + compatible = "ethernet-phy-ieee802.3-c22"; \ + sfp = <&sfp##s>; \ + reg = <##n>; \ + }; + +#define SWITCH_PORT(n, s, m) \ + port@##n { \ + reg = <##n>; \ + label = SWITCH_PORT_LABEL(s) ; \ + phy-handle = <&phy##n>; \ + phy-mode = #m ; \ + }; + +#define SWITCH_SFP_PORT(n, s, m) \ + port@##n { \ + reg = <##n>; \ + label = SWITCH_PORT_LABEL(s) ; \ + phy-handle = <&phy##n>; \ + phy-mode = #m ; \ + fixed-link { \ + speed = <1000>; \ + full-duplex; \ + }; \ + }; + +/ { + #address-cells = <1>; + #size-cells = <1>; + + compatible = "realtek,rtl839x-soc"; + + osc: oscillator { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <25000000>; + }; + + ccu: clock-controller { + compatible = "realtek,rtl8390-clock"; + #clock-cells = <1>; + clocks = <&osc>; + clock-names = "ref_clk"; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + compatible = "mips,mips34Kc"; + reg = <0>; + clocks = <&ccu CLK_CPU>; + operating-points-v2 = <&cpu_opp_table>; + }; + + cpu@1 { + compatible = "mips,mips34Kc"; + reg = <1>; + clocks = <&ccu CLK_CPU>; + operating-points-v2 = <&cpu_opp_table>; + }; + }; + + cpu_opp_table: opp-table-0 { + compatible = "operating-points-v2"; + opp-shared; + + opp00 { + opp-hz = /bits/ 64 <425000000>; + }; + opp01 { + opp-hz = /bits/ 64 <450000000>; + }; + opp02 { + opp-hz = /bits/ 64 <475000000>; + }; + opp03 { + opp-hz = /bits/ 64 <500000000>; + }; + opp04 { + opp-hz = /bits/ 64 <525000000>; + }; + opp05 { + opp-hz = /bits/ 64 <550000000>; + }; + opp06 { + opp-hz = /bits/ 64 <575000000>; + }; + opp07 { + opp-hz = /bits/ 64 <600000000>; + }; + opp08 { + opp-hz = /bits/ 64 <625000000>; + }; + opp09 { + opp-hz = /bits/ 64 <650000000>; + }; + opp10 { + opp-hz = /bits/ 64 <675000000>; + }; + opp11 { + opp-hz = /bits/ 64 <700000000>; + }; + opp12 { + opp-hz = /bits/ 64 <725000000>; + }; + opp13 { + opp-hz = /bits/ 64 <750000000>; + }; + }; + + aliases { + serial0 = &uart0; + serial1 = &uart1; + }; + + chosen { + bootargs = "earlycon"; + stdout-path = "serial0:115200n8"; + }; + + cpuintc: cpuintc { + compatible = "mti,cpu-interrupt-controller"; + #address-cells = <0>; + #interrupt-cells = <1>; + interrupt-controller; + }; + + soc: soc { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x18000000 0x10000>; + + intc: interrupt-controller@3000 { + compatible = "realtek,rtl8390-intc", "realtek,rtl-intc"; + reg = <0x3000 0x18>, <0x3018 0x18>; + interrupt-controller; + #interrupt-cells = <2>; + + interrupt-parent = <&cpuintc>; + interrupts = <2>, <3>, <4>, <5>, <6>; + }; + + spi0: spi@1200 { + compatible = "realtek,rtl8380-spi"; + reg = <0x1200 0x100>; + + #address-cells = <1>; + #size-cells = <0>; + }; + + timer0: timer@3100 { + compatible = "realtek,rtl8390-timer", "realtek,otto-timer"; + reg = <0x3100 0x10>, <0x3110 0x10>, <0x3120 0x10>, + <0x3130 0x10>, <0x3140 0x10>; + + interrupt-parent = <&intc>; + interrupts = <29 4>, <28 4>, <17 4>, <16 4>, <15 4>; + clocks = <&ccu CLK_LXB>; + }; + + uart0: uart@2000 { + compatible = "ns16550a"; + reg = <0x2000 0x100>; + + clocks = <&ccu CLK_LXB>; + + interrupt-parent = <&intc>; + interrupts = <31 1>; + + reg-io-width = <1>; + reg-shift = <2>; + fifo-size = <1>; + no-loopback-test; + }; + + uart1: uart@2100 { + pinctrl-names = "default"; + pinctrl-0 = <&enable_uart1>; + + compatible = "ns16550a"; + reg = <0x2100 0x100>; + + clocks = <&ccu CLK_LXB>; + + interrupt-parent = <&intc>; + interrupts = <30 2>; + + reg-io-width = <1>; + reg-shift = <2>; + fifo-size = <1>; + no-loopback-test; + + status = "disabled"; + }; + + gpio0: gpio-controller@3500 { + compatible = "realtek,rtl8390-gpio", "realtek,otto-gpio"; + reg = <0x3500 0x20>; + + gpio-controller; + #gpio-cells = <2>; + ngpios = <24>; + + interrupt-controller; + #interrupt-cells = <2>; + interrupt-parent = <&intc>; + interrupts = <23 2>; + }; + + watchdog0: watchdog@3150 { + compatible = "realtek,rtl8390-wdt"; + reg = <0x3150 0xc>; + + realtek,reset-mode = "soc"; + + clocks = <&ccu CLK_LXB>; + timeout-sec = <30>; + + interrupt-parent = <&intc>; + interrupt-names = "phase1", "phase2"; + interrupts = <19 4>, <18 4>; + }; + + }; + + pinmux@1b000004 { + compatible = "pinctrl-single"; + reg = <0x1b000004 0x4>; + + pinctrl-single,bit-per-mux; + pinctrl-single,register-width = <32>; + pinctrl-single,function-mask = <0x1>; + #pinctrl-cells = <2>; + + enable_uart1: pinmux_enable_uart1 { + pinctrl-single,bits = <0x0 0x1 0x3>; + }; + + disable_jtag: pinmux_disable_jtag { + pinctrl-single,bits = <0x0 0x2 0x3>; + }; + }; + + /* LED_GLB_CTRL */ + pinmux@1b0000e4 { + compatible = "pinctrl-single"; + reg = <0x1b0000e4 0x4>; + + pinctrl-single,bit-per-mux; + pinctrl-single,register-width = <32>; + pinctrl-single,function-mask = <0x1>; + #pinctrl-cells = <2>; + + /* enable GPIO 0 */ + pinmux_disable_sys_led: disable_sys_led { + pinctrl-single,bits = <0x0 0x0 0x4000>; + }; + }; + + ethernet0: ethernet@1b00a300 { + compatible = "realtek,rtl838x-eth"; + reg = <0x1b00a300 0x100>; + + interrupt-parent = <&intc>; + interrupts = <24 3>; + + phy-mode = "internal"; + + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + + sram0: sram@9f000000 { + compatible = "mmio-sram"; + reg = <0x9f000000 0x18000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x9f000000 0x18000>; + }; + + switch0: switch@1b000000 { + status = "okay"; + compatible = "realtek,rtl83xx-switch"; + + interrupt-parent = <&intc>; + interrupts = <20 2>; + }; +}; diff --git a/target/linux/realtek/dts/rtl839x_d-link_dgs-1210_gpio.dtsi b/target/linux/realtek/dts/rtl839x_d-link_dgs-1210_gpio.dtsi new file mode 100644 index 0000000000..260ab67ef3 --- /dev/null +++ b/target/linux/realtek/dts/rtl839x_d-link_dgs-1210_gpio.dtsi @@ -0,0 +1,75 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT + +/ { + /* Lan 49 */ + i2c0: i2c-gpio-0 { + compatible = "i2c-gpio"; + sda-gpios = <&gpio1 6 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + scl-gpios = <&gpio1 7 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + i2c-gpio,delay-us = <2>; + #address-cells = <1>; + #size-cells = <0>; + }; + + sfp0: sfp-p49 { + compatible = "sff,sfp"; + i2c-bus = <&i2c0>; + los-gpio = <&gpio1 9 GPIO_ACTIVE_HIGH>; + mod-def0-gpio = <&gpio1 8 GPIO_ACTIVE_LOW>; + /* tx-disable-gpio handled by RTL8214FC based on media setting */ + }; + + /* Lan 50 */ + i2c1: i2c-gpio-1 { + compatible = "i2c-gpio"; + sda-gpios = <&gpio1 1 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + scl-gpios = <&gpio1 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + i2c-gpio,delay-us = <2>; + #address-cells = <1>; + #size-cells = <0>; + }; + + sfp1: sfp-p50 { + compatible = "sff,sfp"; + i2c-bus = <&i2c1>; + los-gpio = <&gpio1 4 GPIO_ACTIVE_HIGH>; + mod-def0-gpio = <&gpio1 3 GPIO_ACTIVE_LOW>; + /* tx-disable-gpio handled by RTL8214FC based on media setting */ + }; + + /* Lan 51 */ + i2c2: i2c-gpio-2 { + compatible = "i2c-gpio"; + sda-gpios = <&gpio1 22 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + scl-gpios = <&gpio1 23 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + i2c-gpio,delay-us = <2>; + #address-cells = <1>; + #size-cells = <0>; + }; + + sfp2: sfp-p51 { + compatible = "sff,sfp"; + i2c-bus = <&i2c2>; + los-gpio = <&gpio1 25 GPIO_ACTIVE_HIGH>; + mod-def0-gpio = <&gpio1 24 GPIO_ACTIVE_LOW>; + /* tx-disable-gpio handled by RTL8214FC based on media setting */ + }; + + /* Lan 52 */ + i2c3: i2c-gpio-3 { + compatible = "i2c-gpio"; + sda-gpios = <&gpio1 11 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + scl-gpios = <&gpio1 12 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + i2c-gpio,delay-us = <2>; + #address-cells = <1>; + #size-cells = <0>; + }; + + sfp3: sfp-p52 { + compatible = "sff,sfp"; + i2c-bus = <&i2c3>; + los-gpio = <&gpio1 14 GPIO_ACTIVE_HIGH>; + mod-def0-gpio = <&gpio1 13 GPIO_ACTIVE_LOW>; + /* tx-disable-gpio handled by RTL8214FC based on media setting */ + }; +}; diff --git a/target/linux/realtek/dts/rtl83xx_d-link_dgs-1210_common.dtsi b/target/linux/realtek/dts/rtl83xx_d-link_dgs-1210_common.dtsi new file mode 100644 index 0000000000..fa623d7a90 --- /dev/null +++ b/target/linux/realtek/dts/rtl83xx_d-link_dgs-1210_common.dtsi @@ -0,0 +1,85 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT + +#include +#include +#include + +/ { + aliases { + led-boot = &led_power; + led-failsafe = &led_power; + led-running = &led_power; + led-upgrade = &led_power; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x8000000>; + }; + + leds: leds { + pinctrl-names = "default"; + pinctrl-0 = <&pinmux_disable_sys_led>; + compatible = "gpio-leds"; + + led_power: power { + function = LED_FUNCTION_POWER; + color = ; + gpios = <&gpio0 0 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&gpio0 { + indirect-access-bus-id = <0>; +}; + +&spi0 { + status = "okay"; + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <10000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "u-boot"; + reg = <0x00000000 0x80000>; + read-only; + }; + partition@80000 { + label = "u-boot-env"; + reg = <0x00080000 0x40000>; + }; + partition@c0000 { + label = "board-name"; + reg = <0x000c0000 0x40000>; + }; + partition@280000 { + label = "firmware"; + compatible = "denx,uimage"; + reg = <0x00100000 0xd80000>; + }; + partition@be80000 { + label = "kernel2"; + reg = <0x00e80000 0x180000>; + }; + partition@1000000 { + label = "sysinfo"; + reg = <0x01000000 0x40000>; + }; + partition@1040000 { + label = "rootfs2"; + reg = <0x01040000 0xc00000>; + }; + partition@1c40000 { + label = "jffs2"; + reg = <0x01c40000 0x3c0000>; + }; + }; + }; +}; diff --git a/target/linux/realtek/dts/rtl83xx_d-link_dgs-1210_gpio.dtsi b/target/linux/realtek/dts/rtl83xx_d-link_dgs-1210_gpio.dtsi new file mode 100644 index 0000000000..b1477aa182 --- /dev/null +++ b/target/linux/realtek/dts/rtl83xx_d-link_dgs-1210_gpio.dtsi @@ -0,0 +1,27 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT + +/ { + gpio-restart { + compatible = "gpio-restart"; + gpios = <&gpio1 34 GPIO_ACTIVE_LOW>; + open-source; + }; + + keys: keys { + compatible = "gpio-keys-polled"; + poll-interval = <20>; + + reset { + label = "reset"; + gpios = <&gpio1 33 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + }; + + gpio1: rtl8231-gpio { + compatible = "realtek,rtl8231-gpio"; + #gpio-cells = <2>; + gpio-controller; + indirect-access-bus-id = <0>; + }; +}; diff --git a/target/linux/realtek/dts/rtl83xx_panasonic_mxxeg-pn28xx0k.dtsi b/target/linux/realtek/dts/rtl83xx_panasonic_mxxeg-pn28xx0k.dtsi new file mode 100644 index 0000000000..c08034b958 --- /dev/null +++ b/target/linux/realtek/dts/rtl83xx_panasonic_mxxeg-pn28xx0k.dtsi @@ -0,0 +1,191 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT + +#include +#include +#include + +/ { + chosen { + stdout-path = "serial0:9600n8"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x8000000>; + }; + + leds: leds { + compatible = "gpio-leds"; + + led-0 { + gpios = <&gpio2 0 GPIO_ACTIVE_LOW>; + color = ; + function = LED_FUNCTION_FAULT; + }; + + led-1 { + gpios = <&gpio2 8 GPIO_ACTIVE_LOW>; + color = ; + function = LED_FUNCTION_INDICATOR; + function-enumerator = <1>; + }; + + led-2 { + gpios = <&gpio2 9 GPIO_ACTIVE_LOW>; + color = ; + function = LED_FUNCTION_INDICATOR; + function-enumerator = <2>; + }; + + led-3 { + gpios = <&gpio2 10 GPIO_ACTIVE_LOW>; + color = ; + function = LED_FUNCTION_INDICATOR; + function-enumerator = <3>; + }; + + led-4 { + gpios = <&gpio2 11 GPIO_ACTIVE_LOW>; + color = ; + function = LED_FUNCTION_INDICATOR; + function-enumerator = <4>; + }; + }; + + keys { + compatible = "gpio-keys"; + + led_mode { + label = "led-mode"; + gpios = <&gpio2 15 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + }; + + gpio-restart { + compatible = "gpio-restart"; + gpios = <&gpio2 3 GPIO_ACTIVE_HIGH>; + }; + + i2c_gpio_0: i2c-gpio-0 { + compatible = "i2c-gpio"; + i2c-gpio,delay-us = <2>; + #address-cells = <1>; + #size-cells = <0>; + + gpio1: gpio@20 { + compatible = "nxp,pca9555"; + reg = <0x20>; + gpio-controller; + #gpio-cells = <2>; + }; + + gpio2: gpio@75 { + compatible = "nxp,pca9539"; + reg = <0x75>; + gpio-controller; + #gpio-cells = <2>; + + /* + * GPIO14 (IO1_6): Shift Register RESET (port LED) + * - Switch-M8eG PN28080K: 3x 74HC164 + * - Switch-M16eG PN28160K: 4x 74HC164 + * - Switch-M24eG PN28240K: 6x 74HC164 + * - Switch-M48eG PN28480K: 12x 74HC164 + */ + portled_sregister_reset { + gpio-hog; + gpios = <14 GPIO_ACTIVE_HIGH>; + output-high; + line-name = "portled-sregister-reset"; + }; + }; + }; + + i2c_gpio_1: i2c-gpio-1 { + compatible = "i2c-gpio"; + i2c-gpio,delay-us = <2>; + #address-cells = <1>; + #size-cells = <0>; + + i2c_switch: i2c-switch@70 { + compatible = "nxp,pca9545"; + reset-gpios = <&gpio2 13 GPIO_ACTIVE_LOW>; + reg = <0x70>; + #address-cells = <1>; + #size-cells = <0>; + }; + }; +}; + +&spi0 { + status = "okay"; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <10000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x80000>; + read-only; + }; + + partition@80000 { + label = "u-boot-env"; + reg = <0x80000 0x10000>; + }; + + partition@90000 { + label = "u-boot-env2"; + reg = <0x90000 0x10000>; + }; + + partition@a0000 { + label = "sysinfo"; + reg = <0xa0000 0x60000>; + read-only; + }; + + /* + * Filesystem area in stock firmware + * (0x100000-0x1DFFFFF) + * + * stock firmware images are required to pass + * the checking by the U-Boot, also for OpenWrt + * + * in OpenWrt: + * - 0x100000-0xDFFFFF (13M): stock images + * - 0xE00000-0x1DFFFFF(16M): OpenWrt image + */ + partition@100000 { + label = "fs_reserved"; + reg = <0x100000 0xd00000>; + }; + + partition@e00000 { + compatible = "denx,uimage"; + label = "firmware"; + reg = <0xe00000 0x1000000>; + }; + + partition@1e00000 { + label = "vlog_data"; + reg = <0x1e00000 0x100000>; + read-only; + }; + + partition@1f00000 { + label = "elog_data"; + reg = <0x1f00000 0x100000>; + read-only; + }; + }; + }; +}; diff --git a/target/linux/realtek/dts/rtl9302_zyxel_xgs1250-12.dts b/target/linux/realtek/dts/rtl9302_zyxel_xgs1250-12.dts new file mode 100644 index 0000000000..0c35d7b004 --- /dev/null +++ b/target/linux/realtek/dts/rtl9302_zyxel_xgs1250-12.dts @@ -0,0 +1,424 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/dts-v1/; + +#include "rtl930x.dtsi" + +#include +#include +#include +#include + +/ { + compatible = "zyxel,xgs1250-12", "realtek,rtl838x-soc"; + model = "Zyxel XGS1250-12 Switch"; + + aliases { + led-boot = &led_pwr_sys; + led-failsafe = &led_pwr_sys; + led-running = &led_pwr_sys; + led-upgrade = &led_pwr_sys; + }; + + keys { + compatible = "gpio-keys"; + + mode { + label = "reset"; + gpios = <&gpio0 22 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + }; + + /* i2c of the SFP cage: port 12 */ + i2c0: i2c-rtl9300@1b00036c { + compatible = "realtek,rtl9300-i2c"; + reg = <0x1b00036c 0x3c>; + #address-cells = <1>; + #size-cells = <0>; + sda-pin = <10>; + scl-pin = <8>; + clock-frequency = <100000>; + }; + + leds { + compatible = "gpio-leds"; + + pinctrl-names = "default"; + pinctrl-0 = <&pinmux_disable_sys_led>; + + led_pwr_sys: led-0 { + color = ; + function = LED_FUNCTION_POWER; + gpios = <&gpio0 0 GPIO_ACTIVE_HIGH>; + }; + }; + + sfp0: sfp-p12 { + compatible = "sff,sfp"; + i2c-bus = <&i2c0>; + los-gpio = <&gpio0 17 GPIO_ACTIVE_HIGH>; + tx-fault-gpio = <&gpio0 20 GPIO_ACTIVE_HIGH>; + mod-def0-gpio = <&gpio0 16 GPIO_ACTIVE_LOW>; + tx-disable-gpio = <&gpio0 15 GPIO_ACTIVE_HIGH>; + }; + + led_set: led_set { + compatible = "realtek,rtl9300-leds"; + active-low; + + led_set0 = <0x0a20 0x0b80>; // LED set 0: 1000Mbps, 10/100Mbps + led_set1 = <0x0a0b 0x0a28 0x0a82 0x0a0b>; // LED set 1: (10G, 5G, 2.5G) (2.5G, 1G) + // (5G, 10/100) (10G, 5G, 2.5G) + led_set2 = <0x0a20 0x0a01>; // LED set 2: 1000MBit, 10GBit + }; + + thermal-zones { + phy24-thermal { + /* Poll every 10 seconds */ + polling-delay-passive = <10000>; + polling-delay = <10000>; + thermal-sensors = <&phy24>; + + trips { + phy24_trip0: phy24-trip0 { + /* At 80 degrees turn on fan */ + temperature = <80000>; + hysteresis = <1000>; + type = "active"; + }; + + phy24_trip1: phy24-trip1 { + /* At 108 degrees phys exceed spec */ + temperature = <108000>; + hysteresis = <5000>; + type = "critical"; + }; + }; + + cooling-maps { + map { + trip = <&phy24_trip0>; + cooling-device = <&chassis_fan THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + phy25-thermal { + /* Poll every 10 seconds */ + polling-delay-passive = <10000>; + polling-delay = <10000>; + thermal-sensors = <&phy25>; + + trips { + phy25_trip0: phy25-trip0 { + /* At 80 degrees turn on fan */ + temperature = <80000>; + hysteresis = <1000>; + type = "active"; + }; + + phy25_trip1: phy25-trip1 { + /* At 108 degrees phys exceed spec */ + temperature = <108000>; + hysteresis = <5000>; + type = "critical"; + }; + }; + + cooling-maps { + map { + trip = <&phy25_trip0>; + cooling-device = <&chassis_fan THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + phy26-thermal { + /* Poll every 10 seconds */ + polling-delay-passive = <10000>; + polling-delay = <10000>; + thermal-sensors = <&phy26>; + + trips { + phy26_trip0: phy26-trip0 { + /* At 80 degrees turn on fan */ + temperature = <80000>; + hysteresis = <1000>; + type = "active"; + }; + + phy26_trip1: phy26-trip1 { + /* At 108 degrees phys exceed spec */ + temperature = <108000>; + hysteresis = <5000>; + type = "critical"; + }; + }; + + cooling-maps { + map { + trip = <&phy26_trip0>; + cooling-device = <&chassis_fan THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + }; + + /* YEN SUN TECHNOLOGY FD122510LL-N fan */ + chassis_fan: gpio-fan { + compatible = "gpio-fan"; + gpios = <&gpio0 11 GPIO_ACTIVE_HIGH>; + gpio-fan,speed-map = <0 0 + 7000 1>; + #cooling-cells = <2>; + }; +}; + +&spi0 { + status = "okay"; + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <10000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "u-boot"; + reg = <0x0 0xe0000>; + read-only; + }; + partition@e0000 { + label = "u-boot-env"; + reg = <0xe0000 0x10000>; + }; + partition@f0000 { + label = "u-boot-env2"; + reg = <0xf0000 0x10000>; + read-only; + }; + partition@100000 { + label = "jffs"; + reg = <0x100000 0x100000>; + }; + partition@200000 { + label = "jffs2"; + reg = <0x200000 0x100000>; + }; + partition@b300000 { + label = "firmware"; + reg = <0x300000 0xce0000>; + compatible = "openwrt,uimage", "denx,uimage"; + openwrt,ih-magic = <0x93001250>; + }; + partition@fe0000 { + label = "log"; + reg = <0xfe0000 0x20000>; + }; + }; + }; +}; + +ðernet0 { + mdio: mdio-bus { + compatible = "realtek,rtl838x-mdio"; + regmap = <ðernet0>; + #address-cells = <1>; + #size-cells = <0>; + + /* External RTL8218D PHY */ + phy0: ethernet-phy@0 { + reg = <0>; + compatible = "ethernet-phy-ieee802.3-c22"; + rtl9300,smi-address = <0 0>; + sds = < 2 >; + // Disabled because we do not know how to bring up again + // reset-gpios = <&gpio0 21 GPIO_ACTIVE_LOW>; + }; + phy1: ethernet-phy@1 { + reg = <1>; + compatible = "ethernet-phy-ieee802.3-c22"; + rtl9300,smi-address = <0 1>; + }; + phy2: ethernet-phy@2 { + reg = <2>; + compatible = "ethernet-phy-ieee802.3-c22"; + rtl9300,smi-address = <0 2>; + }; + phy3: ethernet-phy@3 { + reg = <3>; + compatible = "ethernet-phy-ieee802.3-c22"; + rtl9300,smi-address = <0 3>; + }; + phy4: ethernet-phy@4 { + reg = <4>; + compatible = "ethernet-phy-ieee802.3-c22"; + rtl9300,smi-address = <0 4>; + }; + phy5: ethernet-phy@5 { + reg = <5>; + compatible = "ethernet-phy-ieee802.3-c22"; + rtl9300,smi-address = <0 5>; + }; + phy6: ethernet-phy@6 { + reg = <6>; + compatible = "ethernet-phy-ieee802.3-c22"; + rtl9300,smi-address = <0 6>; + }; + phy7: ethernet-phy@7 { + reg = <7>; + compatible = "ethernet-phy-ieee802.3-c22"; + rtl9300,smi-address = <0 7>; + }; + + /* External Aquantia 113C PHYs */ + phy24: ethernet-phy@24 { + reg = <24>; + compatible = "ethernet-phy-ieee802.3-c45"; + rtl9300,smi-address = <1 8>; + sds = < 6 >; + // Disabled because we do not know how to bring up again + // reset-gpios = <&gpio0 21 GPIO_ACTIVE_LOW>; + #thermal-sensor-cells = <0>; + }; + + phy25: ethernet-phy@25 { + reg = <25>; + compatible = "ethernet-phy-ieee802.3-c45"; + rtl9300,smi-address = <2 8>; + sds = < 7 >; + // Disabled because we do not know how to bring up again + // reset-gpios = <&gpio0 21 GPIO_ACTIVE_LOW>; + #thermal-sensor-cells = <0>; + }; + + phy26: ethernet-phy@26 { + reg = <26>; + compatible = "ethernet-phy-ieee802.3-c45"; + rtl9300,smi-address = <3 8>; + sds = < 8 >; + // Disabled because we do not know how to bring up again + // reset-gpios = <&gpio0 21 GPIO_ACTIVE_LOW>; + #thermal-sensor-cells = <0>; + }; + + /* SFP Ports */ + phy27: ethernet-phy@27 { + compatible = "ethernet-phy-ieee802.3-c22"; + phy-is-integrated; + reg = <27>; + rtl9300,smi-address = <4 0>; + sds = < 9 >; + }; + + }; +}; + +&switch0 { + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + label = "lan1"; + phy-handle = <&phy0>; + phy-mode = "xgmii"; + led-set = <0>; + }; + port@1 { + reg = <1>; + label = "lan2"; + phy-handle = <&phy1>; + phy-mode = "xgmii"; + led-set = <0>; + }; + port@2 { + reg = <2>; + label = "lan3"; + phy-handle = <&phy2>; + phy-mode = "xgmii"; + led-set = <0>; + }; + port@3 { + reg = <3>; + label = "lan4"; + phy-handle = <&phy3>; + phy-mode = "xgmii"; + led-set = <0>; + }; + port@4 { + reg = <4>; + label = "lan5"; + phy-handle = <&phy4>; + phy-mode = "xgmii"; + led-set = <0>; + }; + port@5 { + reg = <5>; + label = "lan6"; + phy-handle = <&phy5>; + phy-mode = "xgmii"; + led-set = <0>; + }; + port@6 { + reg = <6>; + label = "lan7"; + phy-handle = <&phy6>; + phy-mode = "xgmii"; + led-set = <0>; + }; + port@7 { + reg = <7>; + label = "lan8"; + phy-handle = <&phy7>; + phy-mode = "xgmii"; + led-set = <0>; + }; + + port@24 { + reg = <24>; + label = "lan9"; + phy-mode = "usxgmii"; + phy-handle = <&phy24>; + led-set = <1>; + }; + port@25 { + reg = <25>; + label = "lan10"; + phy-mode = "usxgmii"; + phy-handle = <&phy25>; + led-set = <1>; + }; + port@26 { + reg = <26>; + label = "lan11"; + phy-mode = "usxgmii"; + phy-handle = <&phy26>; + led-set = <1>; + }; + + port@27 { + reg = <27>; + label = "lan12"; + phy-mode = "1000base-x"; + phy-handle = <&phy27>; + sfp = <&sfp0>; + led-set = <2>; + managed = "in-band-status"; + }; + + port@28 { + ethernet = <ðernet0>; + reg = <28>; + phy-mode = "internal"; + fixed-link { + speed = <10000>; + full-duplex; + }; + }; + }; +}; diff --git a/target/linux/realtek/dts/rtl930x.dtsi b/target/linux/realtek/dts/rtl930x.dtsi new file mode 100644 index 0000000000..9b0a5781a2 --- /dev/null +++ b/target/linux/realtek/dts/rtl930x.dtsi @@ -0,0 +1,183 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT + +/dts-v1/; + +/ { + #address-cells = <1>; + #size-cells = <1>; + + compatible = "realtek,rtl838x-soc"; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + frequency = <800000000>; + + cpu@0 { + compatible = "mips,mips34Kc"; + reg = <0>; + }; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x8000000>; + }; + + aliases { + serial0 = &uart0; + serial1 = &uart1; + }; + + chosen { + bootargs = "earlycon"; + stdout-path = "serial0:115200n8"; + }; + + cpuintc: cpuintc { + compatible = "mti,cpu-interrupt-controller"; + #address-cells = <0>; + #interrupt-cells = <1>; + interrupt-controller; + }; + + lx_clk: lx_clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <175000000>; + }; + + soc: soc { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x18000000 0x10000>; + + intc: interrupt-controller@3000 { + compatible = "realtek,rtl9300-intc", "realtek,rtl-intc"; + reg = <0x3000 0x18>, <0x3018 0x18>; + interrupt-controller; + #interrupt-cells = <2>; + + interrupt-parent = <&cpuintc>; + interrupts = <2>, <3>, <4>, <5>, <6>, <7>; + }; + + spi0: spi@1200 { + compatible = "realtek,rtl8380-spi"; + reg = <0x1200 0x100>; + + #address-cells = <1>; + #size-cells = <0>; + }; + + timer0: timer@3200 { + compatible = "realtek,rtl930x-timer", "realtek,otto-timer"; + reg = <0x3200 0x10>, <0x3210 0x10>, <0x3220 0x10>, + <0x3230 0x10>, <0x3240 0x10>; + + interrupt-parent = <&intc>; + interrupts = <7 4>, <8 4>, <9 4>, <10 4>, <11 4>; + clocks = <&lx_clk>; + }; + + uart0: uart@2000 { + compatible = "ns16550a"; + reg = <0x2000 0x100>; + + clocks = <&lx_clk>; + + interrupt-parent = <&intc>; + interrupts = <30 1>; + + reg-io-width = <1>; + reg-shift = <2>; + fifo-size = <1>; + no-loopback-test; + }; + + uart1: uart@2100 { + compatible = "ns16550a"; + reg = <0x2100 0x100>; + + clocks = <&lx_clk>; + + interrupt-parent = <&intc>; + interrupts = <31 0>; + + reg-io-width = <1>; + reg-shift = <2>; + fifo-size = <1>; + no-loopback-test; + + status = "disabled"; + }; + + watchdog0: watchdog@3260 { + compatible = "realtek,rtl9300-wdt"; + reg = <0x3260 0xc>; + + realtek,reset-mode = "soc"; + + clocks = <&lx_clk>; + timeout-sec = <30>; + + interrupt-parent = <&intc>; + interrupt-names = "phase1", "phase2"; + interrupts = <5 4>, <6 4>; + }; + + gpio0: gpio-controller@3300 { + compatible = "realtek,rtl9300-gpio", "realtek,otto-gpio"; + reg = <0x3300 0x1c>, <0x3338 0x8>; + + gpio-controller; + #gpio-cells = <2>; + ngpios = <24>; + + interrupt-controller; + #interrupt-cells = <2>; + interrupt-parent = <&intc>; + interrupts = <13 1>; + }; + + }; + + pinmux_led: pinmux@1b00cc00 { + compatible = "pinctrl-single"; + reg = <0x1b00cc00 0x4>; + + pinctrl-single,bit-per-mux; + pinctrl-single,register-width = <32>; + pinctrl-single,function-mask = <0x1>; + #pinctrl-cells = <2>; + + /* enable GPIO 0 */ + pinmux_disable_sys_led: disable_sys_led { + pinctrl-single,bits = <0x0 0x0 0x1000>; + }; + }; + + ethernet0: ethernet@1b00a300 { + compatible = "realtek,rtl838x-eth"; + reg = <0x1b00a300 0x100>; + + interrupt-parent = <&intc>; + interrupts = <24 3>; + + phy-mode = "internal"; + + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + + switch0: switch@1b000000 { + compatible = "realtek,rtl83xx-switch"; + status = "okay"; + + interrupt-parent = <&intc>; + interrupts = <23 2>; + }; +}; diff --git a/target/linux/realtek/dts/rtl931x.dtsi b/target/linux/realtek/dts/rtl931x.dtsi new file mode 100644 index 0000000000..61599e89b5 --- /dev/null +++ b/target/linux/realtek/dts/rtl931x.dtsi @@ -0,0 +1,206 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT + +#include + +/ { + #address-cells = <1>; + #size-cells = <1>; + + compatible = "realtek,rtl838x-soc"; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + frequency = <1000000000>; + + cpu@0 { + compatible = "mti,interaptive"; + reg = <0>; + }; + + cpu@1 { + compatible = "mti,interaptive"; + reg = <1>; + }; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x10000000>; + }; + + aliases { + serial0 = &uart0; + serial1 = &uart1; + }; + + chosen { + bootargs = "earlycon"; + stdout-path = "serial0:115200n8"; + }; + + lx_clk: lx_clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <200000000>; + }; + + cpuclock: cpuclock@0 { + #clock-cells = <0>; + compatible = "fixed-clock"; + + /* FIXME: there should be way to detect this */ + clock-frequency = <1000000000>; + }; + + cpuintc: cpuintc { + compatible = "mti,cpu-interrupt-controller"; + #address-cells = <0>; + #interrupt-cells = <1>; + interrupt-controller; + }; + + gic: interrupt-controller@1ddc0000 { + compatible = "mti,gic"; + reg = <0x1ddc0000 0x20000>; + + interrupt-controller; + #interrupt-cells = <3>; + + /* + * Declare the interrupt-parent even though the mti,gic + * binding doesn't require it, such that the kernel can + * figure out that cpu_intc is the root interrupt + * controller & should be probed first. + */ + interrupt-parent = <&cpuintc>; + + timer { + compatible = "mti,gic-timer"; + interrupts = ; + clocks = <&cpuclock>; + }; + }; + + soc: soc { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x18000000 0x10000>; + + spi0: spi@1200 { + status = "okay"; + + compatible = "realtek,rtl8380-spi"; + reg = <0x1200 0x100>; + + #address-cells = <1>; + #size-cells = <0>; + }; + + watchdog0: watchdog@3260 { + compatible = "realtek,rtl9310-wdt"; + reg = <0x3260 0xc>; + + realtek,reset-mode = "soc"; + + clocks = <&lx_clk>; + timeout-sec = <30>; + + interrupt-parent = <&gic>; + interrupt-names = "phase1", "phase2"; + interrupts = , ; + }; + + gpio0: gpio-controller@3300 { + compatible = "realtek,rtl9310-gpio", "realtek,otto-gpio"; + reg = <0x3300 0x1c>; + + gpio-controller; + #gpio-cells = <2>; + ngpios = <32>; + + interrupt-controller; + #interrupt-cells = <3>; + interrupt-parent = <&gic>; + interrupts = ; + }; + + uart0: uart@2000 { + compatible = "ns16550a"; + reg = <0x2000 0x100>; + + clock-frequency = <200000000>; + + interrupt-parent = <&gic>; + #interrupt-cells = <3>; + interrupts = ; + + reg-io-width = <1>; + reg-shift = <2>; + fifo-size = <1>; + no-loopback-test; + }; + + uart1: uart@2100 { + compatible = "ns16550a"; + reg = <0x2100 0x100>; + + clock-frequency = <200000000>; + + interrupt-parent = <&gic>; + #interrupt-cells = <3>; + interrupts = ; + + reg-io-width = <1>; + reg-shift = <2>; + fifo-size = <1>; + no-loopback-test; + + status = "disabled"; + }; + }; + + pinmux: pinmux@1b001358 { + compatible = "pinctrl-single"; + reg = <0x1b001358 0x4>; + + pinctrl-single,bit-per-mux; + pinctrl-single,register-width = <32>; + pinctrl-single,function-mask = <0x1>; + #pinctrl-cells = <2>; + + /* Enable GPIO6 and GPIO7, possibly unknown others */ + pinmux_disable_jtag: disable_jtag { + pinctrl-single,bits = <0x0 0x0 0x8000>; + }; + + /* Controls GPIO0 */ + pinmux_disable_sys_led: disable_sys_led { + pinctrl-single,bits = <0x0 0x0 0x100>; + }; + }; + + ethernet0: ethernet@1b00a300 { + status = "okay"; + compatible = "realtek,rtl838x-eth"; + reg = <0x1b00a300 0x100>; + interrupt-parent = <&gic>; + #interrupt-cells = <3>; + interrupts = ; + phy-mode = "internal"; + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + + switch0: switch@1b000000 { + compatible = "realtek,rtl83xx-switch"; + status = "okay"; + + interrupt-parent = <&gic>; + #interrupt-cells = <3>; + interrupts = ; + }; +}; diff --git a/target/linux/realtek/image/Makefile b/target/linux/realtek/image/Makefile index bb704ac863..9eed710480 100644 --- a/target/linux/realtek/image/Makefile +++ b/target/linux/realtek/image/Makefile @@ -83,7 +83,7 @@ define Device/Default append-dtb | \ libdeflate-gzip | \ uImage gzip - DEVICE_DTS_DIR := ../dts-$(KERNEL_PATCHVER) + DEVICE_DTS_DIR := ../dts DEVICE_DTS = $$(SOC)_$(1) IMAGES := sysupgrade.bin IMAGE/sysupgrade.bin := \