From: Tom Rini Date: Fri, 31 Jul 2015 23:55:09 +0000 (-0400) Subject: gpio: omap: Drop 'method' parameter X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=0a9e34056fcf86fb64e70bd281875eb7bbdbabde;p=project%2Fbcm63xx%2Fu-boot.git gpio: omap: Drop 'method' parameter The "method" parameter was part of the original port of the driver from the kernel. At some point this may have been added to allow for future differentiation (as omap1 and omap2 have different GPIO IP blocks, so this wasn't an unreasonable thing to do). At this point however it's just extra overhead, so drop. Signed-off-by: Tom Rini --- diff --git a/arch/arm/cpu/armv7/am33xx/board.c b/arch/arm/cpu/armv7/am33xx/board.c index a1cb4ecf57..bd14326cf4 100644 --- a/arch/arm/cpu/armv7/am33xx/board.c +++ b/arch/arm/cpu/armv7/am33xx/board.c @@ -73,13 +73,13 @@ U_BOOT_DEVICES(am33xx_uarts) = { #ifndef CONFIG_DM_GPIO static const struct gpio_bank gpio_bank_am33xx[] = { - { (void *)AM33XX_GPIO0_BASE, METHOD_GPIO_24XX }, - { (void *)AM33XX_GPIO1_BASE, METHOD_GPIO_24XX }, - { (void *)AM33XX_GPIO2_BASE, METHOD_GPIO_24XX }, - { (void *)AM33XX_GPIO3_BASE, METHOD_GPIO_24XX }, + { (void *)AM33XX_GPIO0_BASE }, + { (void *)AM33XX_GPIO1_BASE }, + { (void *)AM33XX_GPIO2_BASE }, + { (void *)AM33XX_GPIO3_BASE }, #ifdef CONFIG_AM43XX - { (void *)AM33XX_GPIO4_BASE, METHOD_GPIO_24XX }, - { (void *)AM33XX_GPIO5_BASE, METHOD_GPIO_24XX }, + { (void *)AM33XX_GPIO4_BASE }, + { (void *)AM33XX_GPIO5_BASE }, #endif }; diff --git a/arch/arm/cpu/armv7/omap3/board.c b/arch/arm/cpu/armv7/omap3/board.c index 17cb5b759b..8252b322f6 100644 --- a/arch/arm/cpu/armv7/omap3/board.c +++ b/arch/arm/cpu/armv7/omap3/board.c @@ -38,12 +38,12 @@ static void omap3_invalidate_l2_cache_secure(void); #ifdef CONFIG_DM_GPIO static const struct omap_gpio_platdata omap34xx_gpio[] = { - { 0, OMAP34XX_GPIO1_BASE, METHOD_GPIO_24XX }, - { 1, OMAP34XX_GPIO2_BASE, METHOD_GPIO_24XX }, - { 2, OMAP34XX_GPIO3_BASE, METHOD_GPIO_24XX }, - { 3, OMAP34XX_GPIO4_BASE, METHOD_GPIO_24XX }, - { 4, OMAP34XX_GPIO5_BASE, METHOD_GPIO_24XX }, - { 5, OMAP34XX_GPIO6_BASE, METHOD_GPIO_24XX }, + { 0, OMAP34XX_GPIO1_BASE }, + { 1, OMAP34XX_GPIO2_BASE }, + { 2, OMAP34XX_GPIO3_BASE }, + { 3, OMAP34XX_GPIO4_BASE }, + { 4, OMAP34XX_GPIO5_BASE }, + { 5, OMAP34XX_GPIO6_BASE }, }; U_BOOT_DEVICES(am33xx_gpios) = { @@ -58,12 +58,12 @@ U_BOOT_DEVICES(am33xx_gpios) = { #else static const struct gpio_bank gpio_bank_34xx[6] = { - { (void *)OMAP34XX_GPIO1_BASE, METHOD_GPIO_24XX }, - { (void *)OMAP34XX_GPIO2_BASE, METHOD_GPIO_24XX }, - { (void *)OMAP34XX_GPIO3_BASE, METHOD_GPIO_24XX }, - { (void *)OMAP34XX_GPIO4_BASE, METHOD_GPIO_24XX }, - { (void *)OMAP34XX_GPIO5_BASE, METHOD_GPIO_24XX }, - { (void *)OMAP34XX_GPIO6_BASE, METHOD_GPIO_24XX }, + { (void *)OMAP34XX_GPIO1_BASE }, + { (void *)OMAP34XX_GPIO2_BASE }, + { (void *)OMAP34XX_GPIO3_BASE }, + { (void *)OMAP34XX_GPIO4_BASE }, + { (void *)OMAP34XX_GPIO5_BASE }, + { (void *)OMAP34XX_GPIO6_BASE }, }; const struct gpio_bank *const omap_gpio_bank = gpio_bank_34xx; diff --git a/arch/arm/cpu/armv7/omap4/hwinit.c b/arch/arm/cpu/armv7/omap4/hwinit.c index 9792761d40..a68947faf1 100644 --- a/arch/arm/cpu/armv7/omap4/hwinit.c +++ b/arch/arm/cpu/armv7/omap4/hwinit.c @@ -25,12 +25,12 @@ DECLARE_GLOBAL_DATA_PTR; u32 *const omap_si_rev = (u32 *)OMAP_SRAM_SCRATCH_OMAP_REV; static const struct gpio_bank gpio_bank_44xx[6] = { - { (void *)OMAP44XX_GPIO1_BASE, METHOD_GPIO_24XX }, - { (void *)OMAP44XX_GPIO2_BASE, METHOD_GPIO_24XX }, - { (void *)OMAP44XX_GPIO3_BASE, METHOD_GPIO_24XX }, - { (void *)OMAP44XX_GPIO4_BASE, METHOD_GPIO_24XX }, - { (void *)OMAP44XX_GPIO5_BASE, METHOD_GPIO_24XX }, - { (void *)OMAP44XX_GPIO6_BASE, METHOD_GPIO_24XX }, + { (void *)OMAP44XX_GPIO1_BASE }, + { (void *)OMAP44XX_GPIO2_BASE }, + { (void *)OMAP44XX_GPIO3_BASE }, + { (void *)OMAP44XX_GPIO4_BASE }, + { (void *)OMAP44XX_GPIO5_BASE }, + { (void *)OMAP44XX_GPIO6_BASE }, }; const struct gpio_bank *const omap_gpio_bank = gpio_bank_44xx; diff --git a/arch/arm/cpu/armv7/omap5/hwinit.c b/arch/arm/cpu/armv7/omap5/hwinit.c index 22e0829a6a..3699050e09 100644 --- a/arch/arm/cpu/armv7/omap5/hwinit.c +++ b/arch/arm/cpu/armv7/omap5/hwinit.c @@ -27,18 +27,20 @@ DECLARE_GLOBAL_DATA_PTR; u32 *const omap_si_rev = (u32 *)OMAP_SRAM_SCRATCH_OMAP_REV; +#ifndef CONFIG_DM_GPIO static struct gpio_bank gpio_bank_54xx[8] = { - { (void *)OMAP54XX_GPIO1_BASE, METHOD_GPIO_24XX }, - { (void *)OMAP54XX_GPIO2_BASE, METHOD_GPIO_24XX }, - { (void *)OMAP54XX_GPIO3_BASE, METHOD_GPIO_24XX }, - { (void *)OMAP54XX_GPIO4_BASE, METHOD_GPIO_24XX }, - { (void *)OMAP54XX_GPIO5_BASE, METHOD_GPIO_24XX }, - { (void *)OMAP54XX_GPIO6_BASE, METHOD_GPIO_24XX }, - { (void *)OMAP54XX_GPIO7_BASE, METHOD_GPIO_24XX }, - { (void *)OMAP54XX_GPIO8_BASE, METHOD_GPIO_24XX }, + { (void *)OMAP54XX_GPIO1_BASE }, + { (void *)OMAP54XX_GPIO2_BASE }, + { (void *)OMAP54XX_GPIO3_BASE }, + { (void *)OMAP54XX_GPIO4_BASE }, + { (void *)OMAP54XX_GPIO5_BASE }, + { (void *)OMAP54XX_GPIO6_BASE }, + { (void *)OMAP54XX_GPIO7_BASE }, + { (void *)OMAP54XX_GPIO8_BASE }, }; const struct gpio_bank *const omap_gpio_bank = gpio_bank_54xx; +#endif void do_set_mux32(u32 base, struct pad_conf_entry const *array, int size) { diff --git a/arch/arm/include/asm/omap_gpio.h b/arch/arm/include/asm/omap_gpio.h index 839af54d48..ef38b6308d 100644 --- a/arch/arm/include/asm/omap_gpio.h +++ b/arch/arm/include/asm/omap_gpio.h @@ -23,24 +23,19 @@ #include -enum gpio_method { - METHOD_GPIO_24XX = 4, -}; - #ifdef CONFIG_DM_GPIO /* Information about a GPIO bank */ struct omap_gpio_platdata { int bank_index; ulong base; /* address of registers in physical memory */ - enum gpio_method method; + const char *port_name; }; #else struct gpio_bank { void *base; - int method; }; extern const struct gpio_bank *const omap_gpio_bank; diff --git a/drivers/gpio/omap_gpio.c b/drivers/gpio/omap_gpio.c index 0a1e12419b..cd960dc013 100644 --- a/drivers/gpio/omap_gpio.c +++ b/drivers/gpio/omap_gpio.c @@ -20,9 +20,13 @@ */ #include #include +#include #include #include #include +#include + +DECLARE_GLOBAL_DATA_PTR; #define OMAP_GPIO_DIR_OUT 0 #define OMAP_GPIO_DIR_IN 1 @@ -34,7 +38,6 @@ struct gpio_bank { /* TODO(sjg@chromium.org): Can we use a struct here? */ void *base; /* address of registers in physical memory */ - enum gpio_method method; }; #endif @@ -55,13 +58,8 @@ static void _set_gpio_direction(const struct gpio_bank *bank, int gpio, void *reg = bank->base; u32 l; - switch (bank->method) { - case METHOD_GPIO_24XX: - reg += OMAP_GPIO_OE; - break; - default: - return; - } + reg += OMAP_GPIO_OE; + l = __raw_readl(reg); if (is_input) l |= 1 << gpio; @@ -79,13 +77,7 @@ static int _get_gpio_direction(const struct gpio_bank *bank, int gpio) void *reg = bank->base; u32 v; - switch (bank->method) { - case METHOD_GPIO_24XX: - reg += OMAP_GPIO_OE; - break; - default: - return -1; - } + reg += OMAP_GPIO_OE; v = __raw_readl(reg); @@ -101,19 +93,12 @@ static void _set_gpio_dataout(const struct gpio_bank *bank, int gpio, void *reg = bank->base; u32 l = 0; - switch (bank->method) { - case METHOD_GPIO_24XX: - if (enable) - reg += OMAP_GPIO_SETDATAOUT; - else - reg += OMAP_GPIO_CLEARDATAOUT; - l = 1 << gpio; - break; - default: - printf("omap3-gpio unknown bank method %s %d\n", - __FILE__, __LINE__); - return; - } + if (enable) + reg += OMAP_GPIO_SETDATAOUT; + else + reg += OMAP_GPIO_CLEARDATAOUT; + + l = 1 << gpio; __raw_writel(l, reg); } @@ -122,19 +107,13 @@ static int _get_gpio_value(const struct gpio_bank *bank, int gpio) void *reg = bank->base; int input; - switch (bank->method) { - case METHOD_GPIO_24XX: - input = _get_gpio_direction(bank, gpio); - switch (input) { - case OMAP_GPIO_DIR_IN: - reg += OMAP_GPIO_DATAIN; - break; - case OMAP_GPIO_DIR_OUT: - reg += OMAP_GPIO_DATAOUT; - break; - default: - return -1; - } + input = _get_gpio_direction(bank, gpio); + switch (input) { + case OMAP_GPIO_DIR_IN: + reg += OMAP_GPIO_DATAIN; + break; + case OMAP_GPIO_DIR_OUT: + reg += OMAP_GPIO_DATAOUT; break; default: return -1; @@ -310,24 +289,56 @@ static int omap_gpio_probe(struct udevice *dev) struct gpio_bank *bank = dev_get_priv(dev); struct omap_gpio_platdata *plat = dev_get_platdata(dev); struct gpio_dev_priv *uc_priv = dev_get_uclass_priv(dev); - char name[18], *str; - sprintf(name, "GPIO%d_", plat->bank_index); - str = strdup(name); - if (!str) - return -ENOMEM; - uc_priv->bank_name = str; + uc_priv->bank_name = plat->port_name; uc_priv->gpio_count = GPIO_PER_BANK; bank->base = (void *)plat->base; - bank->method = plat->method; return 0; } +static int omap_gpio_bind(struct udevice *dev) +{ + struct omap_gpio_platdata *plat = dev->platdata; + fdt_addr_t base_addr; + + if (plat) + return 0; + + base_addr = dev_get_addr(dev); + if (base_addr == FDT_ADDR_T_NONE) + return -ENODEV; + + /* + * TODO: + * When every board is converted to driver model and DT is + * supported, this can be done by auto-alloc feature, but + * not using calloc to alloc memory for platdata. + */ + plat = calloc(1, sizeof(*plat)); + if (!plat) + return -ENOMEM; + + plat->base = base_addr; + plat->port_name = fdt_get_name(gd->fdt_blob, dev->of_offset, NULL); + dev->platdata = plat; + + return 0; +} + +static const struct udevice_id omap_gpio_ids[] = { + { .compatible = "ti,omap3-gpio" }, + { .compatible = "ti,omap4-gpio" }, + { .compatible = "ti,am4372-gpio" }, + { } +}; + U_BOOT_DRIVER(gpio_omap) = { .name = "gpio_omap", .id = UCLASS_GPIO, .ops = &gpio_omap_ops, + .of_match = omap_gpio_ids, + .bind = omap_gpio_bind, .probe = omap_gpio_probe, .priv_auto_alloc_size = sizeof(struct gpio_bank), };