From: Christian Marangi Date: Sun, 4 Jun 2023 02:26:59 +0000 (+0200) Subject: generic: backport initial LEDs hw control support X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=0a4b309f41062ef40706162ae53b6428982a0685;p=openwrt%2Fstaging%2Flinusw.git generic: backport initial LEDs hw control support Backport initial LEDs hw control support. Currently this is limited to only rx/tx and link events for the netdev trigger but the API got accepted and the additional modes are working on and will be backported later. Refresh every patch and add the additional config flag for QCA8K new LEDs support. Signed-off-by: Christian Marangi --- diff --git a/target/linux/bcm27xx/patches-5.15/950-0079-leds-Add-the-input-trigger-for-pwr_led.patch b/target/linux/bcm27xx/patches-5.15/950-0079-leds-Add-the-input-trigger-for-pwr_led.patch index cc1202059c..f8fec4294b 100644 --- a/target/linux/bcm27xx/patches-5.15/950-0079-leds-Add-the-input-trigger-for-pwr_led.patch +++ b/target/linux/bcm27xx/patches-5.15/950-0079-leds-Add-the-input-trigger-for-pwr_led.patch @@ -156,7 +156,7 @@ See: https://github.com/raspberrypi/linux/issues/1064 +MODULE_LICENSE("GPL"); --- a/include/linux/leds.h +++ b/include/linux/leds.h -@@ -85,6 +85,9 @@ struct led_classdev { +@@ -95,6 +95,9 @@ struct led_classdev { #define LED_BRIGHT_HW_CHANGED BIT(21) #define LED_RETAIN_AT_SHUTDOWN BIT(22) #define LED_INIT_DEFAULT_TRIGGER BIT(23) diff --git a/target/linux/generic/backport-5.15/814-v6.3-leds-Move-led_init_default_state_get-to-the-global-h.patch b/target/linux/generic/backport-5.15/814-v6.3-leds-Move-led_init_default_state_get-to-the-global-h.patch new file mode 100644 index 0000000000..592111fb95 --- /dev/null +++ b/target/linux/generic/backport-5.15/814-v6.3-leds-Move-led_init_default_state_get-to-the-global-h.patch @@ -0,0 +1,39 @@ +From 156a5bb89ca6f3edd2be0bfd0de15e575442927e Mon Sep 17 00:00:00 2001 +From: Andy Shevchenko +Date: Tue, 3 Jan 2023 15:12:47 +0200 +Subject: [PATCH] leds: Move led_init_default_state_get() to the global header + +There are users inside and outside LED framework that have implemented +a local copy of led_init_default_state_get(). In order to deduplicate +that, as the first step move the declaration from LED header to the +global one. + +Signed-off-by: Andy Shevchenko +Signed-off-by: Lee Jones +Link: https://lore.kernel.org/r/20230103131256.33894-3-andriy.shevchenko@linux.intel.com +--- + drivers/leds/leds.h | 1 - + include/linux/leds.h | 2 ++ + 2 files changed, 2 insertions(+), 1 deletion(-) + +--- a/drivers/leds/leds.h ++++ b/drivers/leds/leds.h +@@ -27,7 +27,6 @@ ssize_t led_trigger_read(struct file *fi + ssize_t led_trigger_write(struct file *filp, struct kobject *kobj, + struct bin_attribute *bin_attr, char *buf, + loff_t pos, size_t count); +-enum led_default_state led_init_default_state_get(struct fwnode_handle *fwnode); + + extern struct rw_semaphore leds_list_lock; + extern struct list_head leds_list; +--- a/include/linux/leds.h ++++ b/include/linux/leds.h +@@ -63,6 +63,8 @@ struct led_init_data { + bool devname_mandatory; + }; + ++enum led_default_state led_init_default_state_get(struct fwnode_handle *fwnode); ++ + struct led_hw_trigger_type { + int dummy; + }; diff --git a/target/linux/generic/backport-5.15/815-v6.4-01-net-dsa-qca8k-move-qca8k_port_to_phy-to-header.patch b/target/linux/generic/backport-5.15/815-v6.4-01-net-dsa-qca8k-move-qca8k_port_to_phy-to-header.patch new file mode 100644 index 0000000000..dcdca90442 --- /dev/null +++ b/target/linux/generic/backport-5.15/815-v6.4-01-net-dsa-qca8k-move-qca8k_port_to_phy-to-header.patch @@ -0,0 +1,67 @@ +From 3e8b4d6277fd19d98c817576954dd6a4ff3caa2b Mon Sep 17 00:00:00 2001 +From: Christian Marangi +Date: Mon, 17 Apr 2023 17:17:23 +0200 +Subject: [PATCH 1/9] net: dsa: qca8k: move qca8k_port_to_phy() to header + +Move qca8k_port_to_phy() to qca8k header as it's useful for future +reference in Switch LEDs module since the same logic is applied to get +the right index of the switch port. +Make it inline as it's simple function that just decrease the port. + +Signed-off-by: Christian Marangi +Reviewed-by: Andrew Lunn +Reviewed-by: Michal Kubiak +Reviewed-by: Florian Fainelli +Signed-off-by: David S. Miller +--- + drivers/net/dsa/qca/qca8k-8xxx.c | 15 --------------- + drivers/net/dsa/qca/qca8k.h | 14 ++++++++++++++ + 2 files changed, 14 insertions(+), 15 deletions(-) + +--- a/drivers/net/dsa/qca/qca8k-8xxx.c ++++ b/drivers/net/dsa/qca/qca8k-8xxx.c +@@ -716,21 +716,6 @@ err_clear_skb: + return ret; + } + +-static u32 +-qca8k_port_to_phy(int port) +-{ +- /* From Andrew Lunn: +- * Port 0 has no internal phy. +- * Port 1 has an internal PHY at MDIO address 0. +- * Port 2 has an internal PHY at MDIO address 1. +- * ... +- * Port 5 has an internal PHY at MDIO address 4. +- * Port 6 has no internal PHY. +- */ +- +- return port - 1; +-} +- + static int + qca8k_mdio_busy_wait(struct mii_bus *bus, u32 reg, u32 mask) + { +--- a/drivers/net/dsa/qca/qca8k.h ++++ b/drivers/net/dsa/qca/qca8k.h +@@ -414,6 +414,20 @@ struct qca8k_fdb { + u8 mac[6]; + }; + ++static inline u32 qca8k_port_to_phy(int port) ++{ ++ /* From Andrew Lunn: ++ * Port 0 has no internal phy. ++ * Port 1 has an internal PHY at MDIO address 0. ++ * Port 2 has an internal PHY at MDIO address 1. ++ * ... ++ * Port 5 has an internal PHY at MDIO address 4. ++ * Port 6 has no internal PHY. ++ */ ++ ++ return port - 1; ++} ++ + /* Common setup function */ + extern const struct qca8k_mib_desc ar8327_mib[]; + extern const struct regmap_access_table qca8k_readable_table; diff --git a/target/linux/generic/backport-5.15/815-v6.4-02-net-dsa-qca8k-add-LEDs-basic-support.patch b/target/linux/generic/backport-5.15/815-v6.4-02-net-dsa-qca8k-add-LEDs-basic-support.patch new file mode 100644 index 0000000000..baf4c2e4ba --- /dev/null +++ b/target/linux/generic/backport-5.15/815-v6.4-02-net-dsa-qca8k-add-LEDs-basic-support.patch @@ -0,0 +1,435 @@ +From 1e264f9d2918b5737023c44a23ae04def1095210 Mon Sep 17 00:00:00 2001 +From: Christian Marangi +Date: Mon, 17 Apr 2023 17:17:24 +0200 +Subject: [PATCH 2/9] net: dsa: qca8k: add LEDs basic support + +Add LEDs basic support for qca8k Switch Family by adding basic +brightness_set() support. + +Since these LEDs refelect port status, the default label is set to +":port". DT binding should describe the color and function of the +LEDs using standard LEDs api. +Each LED always have the device name as prefix. The device name is +composed from the mii bus id and the PHY addr resulting in example +names like: +- qca8k-0.0:00:amber:lan +- qca8k-0.0:00:white:lan +- qca8k-0.0:01:amber:lan +- qca8k-0.0:01:white:lan + +These LEDs supports only blocking variant of the brightness_set() +function since they can sleep during access of the switch leds to set +the brightness. + +While at it add to the qca8k header file each mode defined by the Switch +Documentation for future use. + +Signed-off-by: Christian Marangi +Reviewed-by: Florian Fainelli +Signed-off-by: David S. Miller +--- + drivers/net/dsa/qca/Kconfig | 8 ++ + drivers/net/dsa/qca/Makefile | 3 + + drivers/net/dsa/qca/qca8k-8xxx.c | 5 + + drivers/net/dsa/qca/qca8k-leds.c | 239 +++++++++++++++++++++++++++++++ + drivers/net/dsa/qca/qca8k.h | 60 ++++++++ + drivers/net/dsa/qca/qca8k_leds.h | 16 +++ + 6 files changed, 331 insertions(+) + create mode 100644 drivers/net/dsa/qca/qca8k-leds.c + create mode 100644 drivers/net/dsa/qca/qca8k_leds.h + +--- a/drivers/net/dsa/qca/Kconfig ++++ b/drivers/net/dsa/qca/Kconfig +@@ -15,3 +15,11 @@ config NET_DSA_QCA8K + help + This enables support for the Qualcomm Atheros QCA8K Ethernet + switch chips. ++ ++config NET_DSA_QCA8K_LEDS_SUPPORT ++ bool "Qualcomm Atheros QCA8K Ethernet switch family LEDs support" ++ depends on NET_DSA_QCA8K ++ depends on LEDS_CLASS ++ help ++ This enabled support for LEDs present on the Qualcomm Atheros ++ QCA8K Ethernet switch chips. +--- a/drivers/net/dsa/qca/Makefile ++++ b/drivers/net/dsa/qca/Makefile +@@ -2,3 +2,6 @@ + obj-$(CONFIG_NET_DSA_AR9331) += ar9331.o + obj-$(CONFIG_NET_DSA_QCA8K) += qca8k.o + qca8k-y += qca8k-common.o qca8k-8xxx.o ++ifdef CONFIG_NET_DSA_QCA8K_LEDS_SUPPORT ++qca8k-y += qca8k-leds.o ++endif +--- a/drivers/net/dsa/qca/qca8k-8xxx.c ++++ b/drivers/net/dsa/qca/qca8k-8xxx.c +@@ -22,6 +22,7 @@ + #include + + #include "qca8k.h" ++#include "qca8k_leds.h" + + static void + qca8k_split_addr(u32 regaddr, u16 *r1, u16 *r2, u16 *page) +@@ -1185,6 +1186,10 @@ qca8k_setup(struct dsa_switch *ds) + if (ret) + return ret; + ++ ret = qca8k_setup_led_ctrl(priv); ++ if (ret) ++ return ret; ++ + /* Make sure MAC06 is disabled */ + ret = regmap_clear_bits(priv->regmap, QCA8K_REG_PORT0_PAD_CTRL, + QCA8K_PORT0_PAD_MAC06_EXCHANGE_EN); +--- /dev/null ++++ b/drivers/net/dsa/qca/qca8k-leds.c +@@ -0,0 +1,239 @@ ++// SPDX-License-Identifier: GPL-2.0 ++#include ++#include ++ ++#include "qca8k.h" ++#include "qca8k_leds.h" ++ ++static int ++qca8k_get_enable_led_reg(int port_num, int led_num, struct qca8k_led_pattern_en *reg_info) ++{ ++ switch (port_num) { ++ case 0: ++ reg_info->reg = QCA8K_LED_CTRL_REG(led_num); ++ reg_info->shift = QCA8K_LED_PHY0123_CONTROL_RULE_SHIFT; ++ break; ++ case 1: ++ case 2: ++ case 3: ++ /* Port 123 are controlled on a different reg */ ++ reg_info->reg = QCA8K_LED_CTRL3_REG; ++ reg_info->shift = QCA8K_LED_PHY123_PATTERN_EN_SHIFT(port_num, led_num); ++ break; ++ case 4: ++ reg_info->reg = QCA8K_LED_CTRL_REG(led_num); ++ reg_info->shift = QCA8K_LED_PHY4_CONTROL_RULE_SHIFT; ++ break; ++ default: ++ return -EINVAL; ++ } ++ ++ return 0; ++} ++ ++static int ++qca8k_led_brightness_set(struct qca8k_led *led, ++ enum led_brightness brightness) ++{ ++ struct qca8k_led_pattern_en reg_info; ++ struct qca8k_priv *priv = led->priv; ++ u32 mask, val; ++ ++ qca8k_get_enable_led_reg(led->port_num, led->led_num, ®_info); ++ ++ val = QCA8K_LED_ALWAYS_OFF; ++ if (brightness) ++ val = QCA8K_LED_ALWAYS_ON; ++ ++ /* HW regs to control brightness is special and port 1-2-3 ++ * are placed in a different reg. ++ * ++ * To control port 0 brightness: ++ * - the 2 bit (15, 14) of: ++ * - QCA8K_LED_CTRL0_REG for led1 ++ * - QCA8K_LED_CTRL1_REG for led2 ++ * - QCA8K_LED_CTRL2_REG for led3 ++ * ++ * To control port 4: ++ * - the 2 bit (31, 30) of: ++ * - QCA8K_LED_CTRL0_REG for led1 ++ * - QCA8K_LED_CTRL1_REG for led2 ++ * - QCA8K_LED_CTRL2_REG for led3 ++ * ++ * To control port 1: ++ * - the 2 bit at (9, 8) of QCA8K_LED_CTRL3_REG are used for led1 ++ * - the 2 bit at (11, 10) of QCA8K_LED_CTRL3_REG are used for led2 ++ * - the 2 bit at (13, 12) of QCA8K_LED_CTRL3_REG are used for led3 ++ * ++ * To control port 2: ++ * - the 2 bit at (15, 14) of QCA8K_LED_CTRL3_REG are used for led1 ++ * - the 2 bit at (17, 16) of QCA8K_LED_CTRL3_REG are used for led2 ++ * - the 2 bit at (19, 18) of QCA8K_LED_CTRL3_REG are used for led3 ++ * ++ * To control port 3: ++ * - the 2 bit at (21, 20) of QCA8K_LED_CTRL3_REG are used for led1 ++ * - the 2 bit at (23, 22) of QCA8K_LED_CTRL3_REG are used for led2 ++ * - the 2 bit at (25, 24) of QCA8K_LED_CTRL3_REG are used for led3 ++ * ++ * To abstract this and have less code, we use the port and led numm ++ * to calculate the shift and the correct reg due to this problem of ++ * not having a 1:1 map of LED with the regs. ++ */ ++ if (led->port_num == 0 || led->port_num == 4) { ++ mask = QCA8K_LED_PATTERN_EN_MASK; ++ val <<= QCA8K_LED_PATTERN_EN_SHIFT; ++ } else { ++ mask = QCA8K_LED_PHY123_PATTERN_EN_MASK; ++ } ++ ++ return regmap_update_bits(priv->regmap, reg_info.reg, ++ mask << reg_info.shift, ++ val << reg_info.shift); ++} ++ ++static int ++qca8k_cled_brightness_set_blocking(struct led_classdev *ldev, ++ enum led_brightness brightness) ++{ ++ struct qca8k_led *led = container_of(ldev, struct qca8k_led, cdev); ++ ++ return qca8k_led_brightness_set(led, brightness); ++} ++ ++static enum led_brightness ++qca8k_led_brightness_get(struct qca8k_led *led) ++{ ++ struct qca8k_led_pattern_en reg_info; ++ struct qca8k_priv *priv = led->priv; ++ u32 val; ++ int ret; ++ ++ qca8k_get_enable_led_reg(led->port_num, led->led_num, ®_info); ++ ++ ret = regmap_read(priv->regmap, reg_info.reg, &val); ++ if (ret) ++ return 0; ++ ++ val >>= reg_info.shift; ++ ++ if (led->port_num == 0 || led->port_num == 4) { ++ val &= QCA8K_LED_PATTERN_EN_MASK; ++ val >>= QCA8K_LED_PATTERN_EN_SHIFT; ++ } else { ++ val &= QCA8K_LED_PHY123_PATTERN_EN_MASK; ++ } ++ ++ /* Assume brightness ON only when the LED is set to always ON */ ++ return val == QCA8K_LED_ALWAYS_ON; ++} ++ ++static int ++qca8k_parse_port_leds(struct qca8k_priv *priv, struct fwnode_handle *port, int port_num) ++{ ++ struct fwnode_handle *led = NULL, *leds = NULL; ++ struct led_init_data init_data = { }; ++ struct dsa_switch *ds = priv->ds; ++ enum led_default_state state; ++ struct qca8k_led *port_led; ++ int led_num, led_index; ++ int ret; ++ ++ leds = fwnode_get_named_child_node(port, "leds"); ++ if (!leds) { ++ dev_dbg(priv->dev, "No Leds node specified in device tree for port %d!\n", ++ port_num); ++ return 0; ++ } ++ ++ fwnode_for_each_child_node(leds, led) { ++ /* Reg represent the led number of the port. ++ * Each port can have at most 3 leds attached ++ * Commonly: ++ * 1. is gigabit led ++ * 2. is mbit led ++ * 3. additional status led ++ */ ++ if (fwnode_property_read_u32(led, "reg", &led_num)) ++ continue; ++ ++ if (led_num >= QCA8K_LED_PORT_COUNT) { ++ dev_warn(priv->dev, "Invalid LED reg %d defined for port %d", ++ led_num, port_num); ++ continue; ++ } ++ ++ led_index = QCA8K_LED_PORT_INDEX(port_num, led_num); ++ ++ port_led = &priv->ports_led[led_index]; ++ port_led->port_num = port_num; ++ port_led->led_num = led_num; ++ port_led->priv = priv; ++ ++ state = led_init_default_state_get(led); ++ switch (state) { ++ case LEDS_DEFSTATE_ON: ++ port_led->cdev.brightness = 1; ++ qca8k_led_brightness_set(port_led, 1); ++ break; ++ case LEDS_DEFSTATE_KEEP: ++ port_led->cdev.brightness = ++ qca8k_led_brightness_get(port_led); ++ break; ++ default: ++ port_led->cdev.brightness = 0; ++ qca8k_led_brightness_set(port_led, 0); ++ } ++ ++ port_led->cdev.max_brightness = 1; ++ port_led->cdev.brightness_set_blocking = qca8k_cled_brightness_set_blocking; ++ init_data.default_label = ":port"; ++ init_data.fwnode = led; ++ init_data.devname_mandatory = true; ++ init_data.devicename = kasprintf(GFP_KERNEL, "%s:0%d", ds->slave_mii_bus->id, ++ port_num); ++ if (!init_data.devicename) ++ return -ENOMEM; ++ ++ ret = devm_led_classdev_register_ext(priv->dev, &port_led->cdev, &init_data); ++ if (ret) ++ dev_warn(priv->dev, "Failed to init LED %d for port %d", led_num, port_num); ++ ++ kfree(init_data.devicename); ++ } ++ ++ return 0; ++} ++ ++int ++qca8k_setup_led_ctrl(struct qca8k_priv *priv) ++{ ++ struct fwnode_handle *ports, *port; ++ int port_num; ++ int ret; ++ ++ ports = device_get_named_child_node(priv->dev, "ports"); ++ if (!ports) { ++ dev_info(priv->dev, "No ports node specified in device tree!"); ++ return 0; ++ } ++ ++ fwnode_for_each_child_node(ports, port) { ++ if (fwnode_property_read_u32(port, "reg", &port_num)) ++ continue; ++ ++ /* Skip checking for CPU port 0 and CPU port 6 as not supported */ ++ if (port_num == 0 || port_num == 6) ++ continue; ++ ++ /* Each port can have at most 3 different leds attached. ++ * Switch port starts from 0 to 6, but port 0 and 6 are CPU ++ * port. The port index needs to be decreased by one to identify ++ * the correct port for LED setup. ++ */ ++ ret = qca8k_parse_port_leds(priv, port, qca8k_port_to_phy(port_num)); ++ if (ret) ++ return ret; ++ } ++ ++ return 0; ++} +--- a/drivers/net/dsa/qca/qca8k.h ++++ b/drivers/net/dsa/qca/qca8k.h +@@ -11,6 +11,7 @@ + #include + #include + #include ++#include + #include + + #define QCA8K_ETHERNET_MDIO_PRIORITY 7 +@@ -85,6 +86,51 @@ + #define QCA8K_MDIO_MASTER_DATA(x) FIELD_PREP(QCA8K_MDIO_MASTER_DATA_MASK, x) + #define QCA8K_MDIO_MASTER_MAX_PORTS 5 + #define QCA8K_MDIO_MASTER_MAX_REG 32 ++ ++/* LED control register */ ++#define QCA8K_LED_PORT_COUNT 3 ++#define QCA8K_LED_COUNT ((QCA8K_NUM_PORTS - QCA8K_NUM_CPU_PORTS) * QCA8K_LED_PORT_COUNT) ++#define QCA8K_LED_RULE_COUNT 6 ++#define QCA8K_LED_RULE_MAX 11 ++#define QCA8K_LED_PORT_INDEX(_phy, _led) (((_phy) * QCA8K_LED_PORT_COUNT) + (_led)) ++ ++#define QCA8K_LED_PHY123_PATTERN_EN_SHIFT(_phy, _led) ((((_phy) - 1) * 6) + 8 + (2 * (_led))) ++#define QCA8K_LED_PHY123_PATTERN_EN_MASK GENMASK(1, 0) ++ ++#define QCA8K_LED_PHY0123_CONTROL_RULE_SHIFT 0 ++#define QCA8K_LED_PHY4_CONTROL_RULE_SHIFT 16 ++ ++#define QCA8K_LED_CTRL_REG(_i) (0x050 + (_i) * 4) ++#define QCA8K_LED_CTRL0_REG 0x50 ++#define QCA8K_LED_CTRL1_REG 0x54 ++#define QCA8K_LED_CTRL2_REG 0x58 ++#define QCA8K_LED_CTRL3_REG 0x5C ++#define QCA8K_LED_CTRL_SHIFT(_i) (((_i) % 2) * 16) ++#define QCA8K_LED_CTRL_MASK GENMASK(15, 0) ++#define QCA8K_LED_RULE_MASK GENMASK(13, 0) ++#define QCA8K_LED_BLINK_FREQ_MASK GENMASK(1, 0) ++#define QCA8K_LED_BLINK_FREQ_SHITF 0 ++#define QCA8K_LED_BLINK_2HZ 0 ++#define QCA8K_LED_BLINK_4HZ 1 ++#define QCA8K_LED_BLINK_8HZ 2 ++#define QCA8K_LED_BLINK_AUTO 3 ++#define QCA8K_LED_LINKUP_OVER_MASK BIT(2) ++#define QCA8K_LED_TX_BLINK_MASK BIT(4) ++#define QCA8K_LED_RX_BLINK_MASK BIT(5) ++#define QCA8K_LED_COL_BLINK_MASK BIT(7) ++#define QCA8K_LED_LINK_10M_EN_MASK BIT(8) ++#define QCA8K_LED_LINK_100M_EN_MASK BIT(9) ++#define QCA8K_LED_LINK_1000M_EN_MASK BIT(10) ++#define QCA8K_LED_POWER_ON_LIGHT_MASK BIT(11) ++#define QCA8K_LED_HALF_DUPLEX_MASK BIT(12) ++#define QCA8K_LED_FULL_DUPLEX_MASK BIT(13) ++#define QCA8K_LED_PATTERN_EN_MASK GENMASK(15, 14) ++#define QCA8K_LED_PATTERN_EN_SHIFT 14 ++#define QCA8K_LED_ALWAYS_OFF 0 ++#define QCA8K_LED_ALWAYS_BLINK_4HZ 1 ++#define QCA8K_LED_ALWAYS_ON 2 ++#define QCA8K_LED_RULE_CONTROLLED 3 ++ + #define QCA8K_GOL_MAC_ADDR0 0x60 + #define QCA8K_GOL_MAC_ADDR1 0x64 + #define QCA8K_MAX_FRAME_SIZE 0x78 +@@ -377,6 +423,19 @@ struct qca8k_mdio_cache { + u16 page; + }; + ++struct qca8k_led_pattern_en { ++ u32 reg; ++ u8 shift; ++}; ++ ++struct qca8k_led { ++ u8 port_num; ++ u8 led_num; ++ u16 old_rule; ++ struct qca8k_priv *priv; ++ struct led_classdev cdev; ++}; ++ + struct qca8k_priv { + u8 switch_id; + u8 switch_revision; +@@ -399,6 +458,7 @@ struct qca8k_priv { + struct qca8k_mib_eth_data mib_eth_data; + struct qca8k_mdio_cache mdio_cache; + const struct qca8k_match_data *info; ++ struct qca8k_led ports_led[QCA8K_LED_COUNT]; + }; + + struct qca8k_mib_desc { +--- /dev/null ++++ b/drivers/net/dsa/qca/qca8k_leds.h +@@ -0,0 +1,16 @@ ++/* SPDX-License-Identifier: GPL-2.0-only */ ++ ++#ifndef __QCA8K_LEDS_H ++#define __QCA8K_LEDS_H ++ ++/* Leds Support function */ ++#ifdef CONFIG_NET_DSA_QCA8K_LEDS_SUPPORT ++int qca8k_setup_led_ctrl(struct qca8k_priv *priv); ++#else ++static inline int qca8k_setup_led_ctrl(struct qca8k_priv *priv) ++{ ++ return 0; ++} ++#endif ++ ++#endif /* __QCA8K_LEDS_H */ diff --git a/target/linux/generic/backport-5.15/815-v6.4-03-net-dsa-qca8k-add-LEDs-blink_set-support.patch b/target/linux/generic/backport-5.15/815-v6.4-03-net-dsa-qca8k-add-LEDs-blink_set-support.patch new file mode 100644 index 0000000000..231c4156df --- /dev/null +++ b/target/linux/generic/backport-5.15/815-v6.4-03-net-dsa-qca8k-add-LEDs-blink_set-support.patch @@ -0,0 +1,74 @@ +From 91acadcc6e599dfc62717abcdad58a459cfb1684 Mon Sep 17 00:00:00 2001 +From: Christian Marangi +Date: Mon, 17 Apr 2023 17:17:25 +0200 +Subject: [PATCH 3/9] net: dsa: qca8k: add LEDs blink_set() support + +Add LEDs blink_set() support to qca8k Switch Family. +These LEDs support hw accellerated blinking at a fixed rate +of 4Hz. + +Reject any other value since not supported by the LEDs switch. + +Signed-off-by: Christian Marangi +Reviewed-by: Andrew Lunn +Acked-by: Pavel Machek +Reviewed-by: Florian Fainelli +Signed-off-by: David S. Miller +--- + drivers/net/dsa/qca/qca8k-leds.c | 38 ++++++++++++++++++++++++++++++++ + 1 file changed, 38 insertions(+) + +--- a/drivers/net/dsa/qca/qca8k-leds.c ++++ b/drivers/net/dsa/qca/qca8k-leds.c +@@ -128,6 +128,43 @@ qca8k_led_brightness_get(struct qca8k_le + } + + static int ++qca8k_cled_blink_set(struct led_classdev *ldev, ++ unsigned long *delay_on, ++ unsigned long *delay_off) ++{ ++ struct qca8k_led *led = container_of(ldev, struct qca8k_led, cdev); ++ u32 mask, val = QCA8K_LED_ALWAYS_BLINK_4HZ; ++ struct qca8k_led_pattern_en reg_info; ++ struct qca8k_priv *priv = led->priv; ++ ++ if (*delay_on == 0 && *delay_off == 0) { ++ *delay_on = 125; ++ *delay_off = 125; ++ } ++ ++ if (*delay_on != 125 || *delay_off != 125) { ++ /* The hardware only supports blinking at 4Hz. Fall back ++ * to software implementation in other cases. ++ */ ++ return -EINVAL; ++ } ++ ++ qca8k_get_enable_led_reg(led->port_num, led->led_num, ®_info); ++ ++ if (led->port_num == 0 || led->port_num == 4) { ++ mask = QCA8K_LED_PATTERN_EN_MASK; ++ val <<= QCA8K_LED_PATTERN_EN_SHIFT; ++ } else { ++ mask = QCA8K_LED_PHY123_PATTERN_EN_MASK; ++ } ++ ++ regmap_update_bits(priv->regmap, reg_info.reg, mask << reg_info.shift, ++ val << reg_info.shift); ++ ++ return 0; ++} ++ ++static int + qca8k_parse_port_leds(struct qca8k_priv *priv, struct fwnode_handle *port, int port_num) + { + struct fwnode_handle *led = NULL, *leds = NULL; +@@ -186,6 +223,7 @@ qca8k_parse_port_leds(struct qca8k_priv + + port_led->cdev.max_brightness = 1; + port_led->cdev.brightness_set_blocking = qca8k_cled_brightness_set_blocking; ++ port_led->cdev.blink_set = qca8k_cled_blink_set; + init_data.default_label = ":port"; + init_data.fwnode = led; + init_data.devname_mandatory = true; diff --git a/target/linux/generic/backport-5.15/815-v6.4-04-leds-Provide-stubs-for-when-CLASS_LED-NEW_LEDS-are-d.patch b/target/linux/generic/backport-5.15/815-v6.4-04-leds-Provide-stubs-for-when-CLASS_LED-NEW_LEDS-are-d.patch new file mode 100644 index 0000000000..bc905b4468 --- /dev/null +++ b/target/linux/generic/backport-5.15/815-v6.4-04-leds-Provide-stubs-for-when-CLASS_LED-NEW_LEDS-are-d.patch @@ -0,0 +1,59 @@ +From e5029edd53937a29801ef507cee12e657ff31ea9 Mon Sep 17 00:00:00 2001 +From: Andrew Lunn +Date: Mon, 17 Apr 2023 17:17:26 +0200 +Subject: [PATCH 4/9] leds: Provide stubs for when CLASS_LED & NEW_LEDS are + disabled + +Provide stubs for devm_led_classdev_register_ext() and +led_init_default_state_get() so that LED drivers embedded within other +drivers such as PHYs and Ethernet switches still build when LEDS_CLASS +or NEW_LEDS are disabled. This also helps with Kconfig dependencies, +which are somewhat hairy for phylib and mdio and only get worse when +adding a dependency on LED_CLASS. + +Signed-off-by: Andrew Lunn +Signed-off-by: Christian Marangi +Reviewed-by: Florian Fainelli +Signed-off-by: David S. Miller +--- + include/linux/leds.h | 18 ++++++++++++++++++ + 1 file changed, 18 insertions(+) + +--- a/include/linux/leds.h ++++ b/include/linux/leds.h +@@ -63,7 +63,15 @@ struct led_init_data { + bool devname_mandatory; + }; + ++#if IS_ENABLED(CONFIG_NEW_LEDS) + enum led_default_state led_init_default_state_get(struct fwnode_handle *fwnode); ++#else ++static inline enum led_default_state ++led_init_default_state_get(struct fwnode_handle *fwnode) ++{ ++ return LEDS_DEFSTATE_OFF; ++} ++#endif + + struct led_hw_trigger_type { + int dummy; +@@ -198,9 +206,19 @@ static inline int led_classdev_register( + return led_classdev_register_ext(parent, led_cdev, NULL); + } + ++#if IS_ENABLED(CONFIG_LEDS_CLASS) + int devm_led_classdev_register_ext(struct device *parent, + struct led_classdev *led_cdev, + struct led_init_data *init_data); ++#else ++static inline int ++devm_led_classdev_register_ext(struct device *parent, ++ struct led_classdev *led_cdev, ++ struct led_init_data *init_data) ++{ ++ return 0; ++} ++#endif + + static inline int devm_led_classdev_register(struct device *parent, + struct led_classdev *led_cdev) diff --git a/target/linux/generic/backport-5.15/815-v6.4-05-net-phy-Add-a-binding-for-PHY-LEDs.patch b/target/linux/generic/backport-5.15/815-v6.4-05-net-phy-Add-a-binding-for-PHY-LEDs.patch new file mode 100644 index 0000000000..7ca128b17d --- /dev/null +++ b/target/linux/generic/backport-5.15/815-v6.4-05-net-phy-Add-a-binding-for-PHY-LEDs.patch @@ -0,0 +1,191 @@ +From 01e5b728e9e43ae444e0369695a5f72209906464 Mon Sep 17 00:00:00 2001 +From: Andrew Lunn +Date: Mon, 17 Apr 2023 17:17:27 +0200 +Subject: [PATCH 5/9] net: phy: Add a binding for PHY LEDs + +Define common binding parsing for all PHY drivers with LEDs using +phylib. Parse the DT as part of the phy_probe and add LEDs to the +linux LED class infrastructure. For the moment, provide a dummy +brightness function, which will later be replaced with a call into the +PHY driver. This allows testing since the LED core might otherwise +reject an LED whose brightness cannot be set. + +Add a dependency on LED_CLASS. It either needs to be built in, or not +enabled, since a modular build can result in linker errors. + +Signed-off-by: Andrew Lunn +Signed-off-by: Christian Marangi +Reviewed-by: Florian Fainelli +Signed-off-by: David S. Miller +--- + drivers/net/phy/Kconfig | 1 + + drivers/net/phy/phy_device.c | 76 ++++++++++++++++++++++++++++++++++++ + include/linux/phy.h | 16 ++++++++ + 3 files changed, 93 insertions(+) + +--- a/drivers/net/phy/Kconfig ++++ b/drivers/net/phy/Kconfig +@@ -18,6 +18,7 @@ menuconfig PHYLIB + depends on NETDEVICES + select MDIO_DEVICE + select MDIO_DEVRES ++ depends on LEDS_CLASS || LEDS_CLASS=n + help + Ethernet controllers are usually attached to PHY + devices. This option provides infrastructure for +--- a/drivers/net/phy/phy_device.c ++++ b/drivers/net/phy/phy_device.c +@@ -19,10 +19,12 @@ + #include + #include + #include ++#include + #include + #include + #include + #include ++#include + #include + #include + #include +@@ -641,6 +643,7 @@ struct phy_device *phy_device_create(str + device_initialize(&mdiodev->dev); + + dev->state = PHY_DOWN; ++ INIT_LIST_HEAD(&dev->leds); + + mutex_init(&dev->lock); + INIT_DELAYED_WORK(&dev->state_queue, phy_state_machine); +@@ -2942,6 +2945,74 @@ static bool phy_drv_supports_irq(struct + return phydrv->config_intr && phydrv->handle_interrupt; + } + ++/* Dummy implementation until calls into PHY driver are added */ ++static int phy_led_set_brightness(struct led_classdev *led_cdev, ++ enum led_brightness value) ++{ ++ return 0; ++} ++ ++static int of_phy_led(struct phy_device *phydev, ++ struct device_node *led) ++{ ++ struct device *dev = &phydev->mdio.dev; ++ struct led_init_data init_data = {}; ++ struct led_classdev *cdev; ++ struct phy_led *phyled; ++ int err; ++ ++ phyled = devm_kzalloc(dev, sizeof(*phyled), GFP_KERNEL); ++ if (!phyled) ++ return -ENOMEM; ++ ++ cdev = &phyled->led_cdev; ++ ++ err = of_property_read_u8(led, "reg", &phyled->index); ++ if (err) ++ return err; ++ ++ cdev->brightness_set_blocking = phy_led_set_brightness; ++ cdev->max_brightness = 1; ++ init_data.devicename = dev_name(&phydev->mdio.dev); ++ init_data.fwnode = of_fwnode_handle(led); ++ init_data.devname_mandatory = true; ++ ++ err = devm_led_classdev_register_ext(dev, cdev, &init_data); ++ if (err) ++ return err; ++ ++ list_add(&phyled->list, &phydev->leds); ++ ++ return 0; ++} ++ ++static int of_phy_leds(struct phy_device *phydev) ++{ ++ struct device_node *node = phydev->mdio.dev.of_node; ++ struct device_node *leds, *led; ++ int err; ++ ++ if (!IS_ENABLED(CONFIG_OF_MDIO)) ++ return 0; ++ ++ if (!node) ++ return 0; ++ ++ leds = of_get_child_by_name(node, "leds"); ++ if (!leds) ++ return 0; ++ ++ for_each_available_child_of_node(leds, led) { ++ err = of_phy_led(phydev, led); ++ if (err) { ++ of_node_put(led); ++ return err; ++ } ++ } ++ ++ return 0; ++} ++ + /** + * fwnode_mdio_find_device - Given a fwnode, find the mdio_device + * @fwnode: pointer to the mdio_device's fwnode +@@ -3118,6 +3189,11 @@ static int phy_probe(struct device *dev) + /* Set the state to READY by default */ + phydev->state = PHY_READY; + ++ /* Get the LEDs from the device tree, and instantiate standard ++ * LEDs for them. ++ */ ++ err = of_phy_leds(phydev); ++ + out: + /* Re-assert the reset signal on error */ + if (err) +--- a/include/linux/phy.h ++++ b/include/linux/phy.h +@@ -14,6 +14,7 @@ + #include + #include + #include ++#include + #include + #include + #include +@@ -582,6 +583,7 @@ struct macsec_ops; + * @phy_num_led_triggers: Number of triggers in @phy_led_triggers + * @led_link_trigger: LED trigger for link up/down + * @last_triggered: last LED trigger for link speed ++ * @leds: list of PHY LED structures + * @master_slave_set: User requested master/slave configuration + * @master_slave_get: Current master/slave advertisement + * @master_slave_state: Current master/slave configuration +@@ -668,6 +670,7 @@ struct phy_device { + + struct phy_led_trigger *led_link_trigger; + #endif ++ struct list_head leds; + + /* + * Interrupt number for this PHY +@@ -739,6 +742,19 @@ struct phy_tdr_config { + #define PHY_PAIR_ALL -1 + + /** ++ * struct phy_led: An LED driven by the PHY ++ * ++ * @list: List of LEDs ++ * @led_cdev: Standard LED class structure ++ * @index: Number of the LED ++ */ ++struct phy_led { ++ struct list_head list; ++ struct led_classdev led_cdev; ++ u8 index; ++}; ++ ++/** + * struct phy_driver - Driver structure for a particular PHY type + * + * @mdiodrv: Data common to all MDIO devices diff --git a/target/linux/generic/backport-5.15/815-v6.4-06-net-phy-phy_device-Call-into-the-PHY-driver-to-set-L.patch b/target/linux/generic/backport-5.15/815-v6.4-06-net-phy-phy_device-Call-into-the-PHY-driver-to-set-L.patch new file mode 100644 index 0000000000..f990557cc7 --- /dev/null +++ b/target/linux/generic/backport-5.15/815-v6.4-06-net-phy-phy_device-Call-into-the-PHY-driver-to-set-L.patch @@ -0,0 +1,97 @@ +From 684818189b04b095b34964ed4a3ea5249a840eab Mon Sep 17 00:00:00 2001 +From: Andrew Lunn +Date: Mon, 17 Apr 2023 17:17:28 +0200 +Subject: [PATCH 6/9] net: phy: phy_device: Call into the PHY driver to set LED + brightness + +Linux LEDs can be software controlled via the brightness file in /sys. +LED drivers need to implement a brightness_set function which the core +will call. Implement an intermediary in phy_device, which will call +into the phy driver if it implements the necessary function. + +Signed-off-by: Andrew Lunn +Signed-off-by: Christian Marangi +Reviewed-by: Florian Fainelli +Signed-off-by: David S. Miller +--- + drivers/net/phy/phy_device.c | 15 ++++++++++++--- + include/linux/phy.h | 13 +++++++++++++ + 2 files changed, 25 insertions(+), 3 deletions(-) + +--- a/drivers/net/phy/phy_device.c ++++ b/drivers/net/phy/phy_device.c +@@ -2945,11 +2945,18 @@ static bool phy_drv_supports_irq(struct + return phydrv->config_intr && phydrv->handle_interrupt; + } + +-/* Dummy implementation until calls into PHY driver are added */ + static int phy_led_set_brightness(struct led_classdev *led_cdev, + enum led_brightness value) + { +- return 0; ++ struct phy_led *phyled = to_phy_led(led_cdev); ++ struct phy_device *phydev = phyled->phydev; ++ int err; ++ ++ mutex_lock(&phydev->lock); ++ err = phydev->drv->led_brightness_set(phydev, phyled->index, value); ++ mutex_unlock(&phydev->lock); ++ ++ return err; + } + + static int of_phy_led(struct phy_device *phydev, +@@ -2966,12 +2973,14 @@ static int of_phy_led(struct phy_device + return -ENOMEM; + + cdev = &phyled->led_cdev; ++ phyled->phydev = phydev; + + err = of_property_read_u8(led, "reg", &phyled->index); + if (err) + return err; + +- cdev->brightness_set_blocking = phy_led_set_brightness; ++ if (phydev->drv->led_brightness_set) ++ cdev->brightness_set_blocking = phy_led_set_brightness; + cdev->max_brightness = 1; + init_data.devicename = dev_name(&phydev->mdio.dev); + init_data.fwnode = of_fwnode_handle(led); +--- a/include/linux/phy.h ++++ b/include/linux/phy.h +@@ -745,15 +745,19 @@ struct phy_tdr_config { + * struct phy_led: An LED driven by the PHY + * + * @list: List of LEDs ++ * @phydev: PHY this LED is attached to + * @led_cdev: Standard LED class structure + * @index: Number of the LED + */ + struct phy_led { + struct list_head list; ++ struct phy_device *phydev; + struct led_classdev led_cdev; + u8 index; + }; + ++#define to_phy_led(d) container_of(d, struct phy_led, led_cdev) ++ + /** + * struct phy_driver - Driver structure for a particular PHY type + * +@@ -953,6 +957,15 @@ struct phy_driver { + int (*get_sqi)(struct phy_device *dev); + /** @get_sqi_max: Get the maximum signal quality indication */ + int (*get_sqi_max)(struct phy_device *dev); ++ ++ /** ++ * @led_brightness_set: Set a PHY LED brightness. Index ++ * indicates which of the PHYs led should be set. Value ++ * follows the standard LED class meaning, e.g. LED_OFF, ++ * LED_HALF, LED_FULL. ++ */ ++ int (*led_brightness_set)(struct phy_device *dev, ++ u8 index, enum led_brightness value); + }; + #define to_phy_driver(d) container_of(to_mdio_common_driver(d), \ + struct phy_driver, mdiodrv) diff --git a/target/linux/generic/backport-5.15/815-v6.4-07-net-phy-marvell-Add-software-control-of-the-LEDs.patch b/target/linux/generic/backport-5.15/815-v6.4-07-net-phy-marvell-Add-software-control-of-the-LEDs.patch new file mode 100644 index 0000000000..053288ceca --- /dev/null +++ b/target/linux/generic/backport-5.15/815-v6.4-07-net-phy-marvell-Add-software-control-of-the-LEDs.patch @@ -0,0 +1,112 @@ +From 2d3960e58ef7c83fe1dbf952f056b9e906cb6df8 Mon Sep 17 00:00:00 2001 +From: Andrew Lunn +Date: Mon, 17 Apr 2023 17:17:29 +0200 +Subject: [PATCH 7/9] net: phy: marvell: Add software control of the LEDs + +Add a brightness function, so the LEDs can be controlled from +software using the standard Linux LED infrastructure. + +Signed-off-by: Andrew Lunn +Signed-off-by: Christian Marangi +Reviewed-by: Florian Fainelli +Signed-off-by: David S. Miller +--- + drivers/net/phy/marvell.c | 45 ++++++++++++++++++++++++++++++++++----- + 1 file changed, 40 insertions(+), 5 deletions(-) + +--- a/drivers/net/phy/marvell.c ++++ b/drivers/net/phy/marvell.c +@@ -144,11 +144,13 @@ + /* WOL Event Interrupt Enable */ + #define MII_88E1318S_PHY_CSIER_WOL_EIE BIT(7) + +-/* LED Timer Control Register */ +-#define MII_88E1318S_PHY_LED_TCR 0x12 +-#define MII_88E1318S_PHY_LED_TCR_FORCE_INT BIT(15) +-#define MII_88E1318S_PHY_LED_TCR_INTn_ENABLE BIT(7) +-#define MII_88E1318S_PHY_LED_TCR_INT_ACTIVE_LOW BIT(11) ++#define MII_88E1318S_PHY_LED_FUNC 0x10 ++#define MII_88E1318S_PHY_LED_FUNC_OFF (0x8) ++#define MII_88E1318S_PHY_LED_FUNC_ON (0x9) ++#define MII_88E1318S_PHY_LED_TCR 0x12 ++#define MII_88E1318S_PHY_LED_TCR_FORCE_INT BIT(15) ++#define MII_88E1318S_PHY_LED_TCR_INTn_ENABLE BIT(7) ++#define MII_88E1318S_PHY_LED_TCR_INT_ACTIVE_LOW BIT(11) + + /* Magic Packet MAC address registers */ + #define MII_88E1318S_PHY_MAGIC_PACKET_WORD2 0x17 +@@ -2793,6 +2795,34 @@ static int marvell_hwmon_probe(struct ph + } + #endif + ++static int m88e1318_led_brightness_set(struct phy_device *phydev, ++ u8 index, enum led_brightness value) ++{ ++ int reg; ++ ++ reg = phy_read_paged(phydev, MII_MARVELL_LED_PAGE, ++ MII_88E1318S_PHY_LED_FUNC); ++ if (reg < 0) ++ return reg; ++ ++ switch (index) { ++ case 0: ++ case 1: ++ case 2: ++ reg &= ~(0xf << (4 * index)); ++ if (value == LED_OFF) ++ reg |= MII_88E1318S_PHY_LED_FUNC_OFF << (4 * index); ++ else ++ reg |= MII_88E1318S_PHY_LED_FUNC_ON << (4 * index); ++ break; ++ default: ++ return -EINVAL; ++ } ++ ++ return phy_write_paged(phydev, MII_MARVELL_LED_PAGE, ++ MII_88E1318S_PHY_LED_FUNC, reg); ++} ++ + static int marvell_probe(struct phy_device *phydev) + { + struct marvell_priv *priv; +@@ -3041,6 +3071,7 @@ static struct phy_driver marvell_drivers + .get_sset_count = marvell_get_sset_count, + .get_strings = marvell_get_strings, + .get_stats = marvell_get_stats, ++ .led_brightness_set = m88e1318_led_brightness_set, + }, + { + .phy_id = MARVELL_PHY_ID_88E1145, +@@ -3147,6 +3178,7 @@ static struct phy_driver marvell_drivers + .cable_test_start = marvell_vct7_cable_test_start, + .cable_test_tdr_start = marvell_vct5_cable_test_tdr_start, + .cable_test_get_status = marvell_vct7_cable_test_get_status, ++ .led_brightness_set = m88e1318_led_brightness_set, + }, + { + .phy_id = MARVELL_PHY_ID_88E1540, +@@ -3173,6 +3205,7 @@ static struct phy_driver marvell_drivers + .cable_test_start = marvell_vct7_cable_test_start, + .cable_test_tdr_start = marvell_vct5_cable_test_tdr_start, + .cable_test_get_status = marvell_vct7_cable_test_get_status, ++ .led_brightness_set = m88e1318_led_brightness_set, + }, + { + .phy_id = MARVELL_PHY_ID_88E1545, +@@ -3199,6 +3232,7 @@ static struct phy_driver marvell_drivers + .cable_test_start = marvell_vct7_cable_test_start, + .cable_test_tdr_start = marvell_vct5_cable_test_tdr_start, + .cable_test_get_status = marvell_vct7_cable_test_get_status, ++ .led_brightness_set = m88e1318_led_brightness_set, + }, + { + .phy_id = MARVELL_PHY_ID_88E3016, +@@ -3340,6 +3374,7 @@ static struct phy_driver marvell_drivers + .get_stats = marvell_get_stats, + .get_tunable = m88e1540_get_tunable, + .set_tunable = m88e1540_set_tunable, ++ .led_brightness_set = m88e1318_led_brightness_set, + }, + }; + diff --git a/target/linux/generic/backport-5.15/815-v6.4-08-net-phy-phy_device-Call-into-the-PHY-driver-to-set-L.patch b/target/linux/generic/backport-5.15/815-v6.4-08-net-phy-phy_device-Call-into-the-PHY-driver-to-set-L.patch new file mode 100644 index 0000000000..4814688de4 --- /dev/null +++ b/target/linux/generic/backport-5.15/815-v6.4-08-net-phy-phy_device-Call-into-the-PHY-driver-to-set-L.patch @@ -0,0 +1,73 @@ +From 4e901018432e38eab35d2a352661ce4727795be1 Mon Sep 17 00:00:00 2001 +From: Andrew Lunn +Date: Mon, 17 Apr 2023 17:17:30 +0200 +Subject: [PATCH 8/9] net: phy: phy_device: Call into the PHY driver to set LED + blinking + +Linux LEDs can be requested to perform hardware accelerated +blinking. Pass this to the PHY driver, if it implements the op. + +Signed-off-by: Andrew Lunn +Signed-off-by: Christian Marangi +Reviewed-by: Florian Fainelli +Signed-off-by: David S. Miller +--- + drivers/net/phy/phy_device.c | 18 ++++++++++++++++++ + include/linux/phy.h | 12 ++++++++++++ + 2 files changed, 30 insertions(+) + +--- a/drivers/net/phy/phy_device.c ++++ b/drivers/net/phy/phy_device.c +@@ -2959,6 +2959,22 @@ static int phy_led_set_brightness(struct + return err; + } + ++static int phy_led_blink_set(struct led_classdev *led_cdev, ++ unsigned long *delay_on, ++ unsigned long *delay_off) ++{ ++ struct phy_led *phyled = to_phy_led(led_cdev); ++ struct phy_device *phydev = phyled->phydev; ++ int err; ++ ++ mutex_lock(&phydev->lock); ++ err = phydev->drv->led_blink_set(phydev, phyled->index, ++ delay_on, delay_off); ++ mutex_unlock(&phydev->lock); ++ ++ return err; ++} ++ + static int of_phy_led(struct phy_device *phydev, + struct device_node *led) + { +@@ -2981,6 +2997,8 @@ static int of_phy_led(struct phy_device + + if (phydev->drv->led_brightness_set) + cdev->brightness_set_blocking = phy_led_set_brightness; ++ if (phydev->drv->led_blink_set) ++ cdev->blink_set = phy_led_blink_set; + cdev->max_brightness = 1; + init_data.devicename = dev_name(&phydev->mdio.dev); + init_data.fwnode = of_fwnode_handle(led); +--- a/include/linux/phy.h ++++ b/include/linux/phy.h +@@ -966,6 +966,18 @@ struct phy_driver { + */ + int (*led_brightness_set)(struct phy_device *dev, + u8 index, enum led_brightness value); ++ ++ /** ++ * @led_blink_set: Set a PHY LED brightness. Index indicates ++ * which of the PHYs led should be configured to blink. Delays ++ * are in milliseconds and if both are zero then a sensible ++ * default should be chosen. The call should adjust the ++ * timings in that case and if it can't match the values ++ * specified exactly. ++ */ ++ int (*led_blink_set)(struct phy_device *dev, u8 index, ++ unsigned long *delay_on, ++ unsigned long *delay_off); + }; + #define to_phy_driver(d) container_of(to_mdio_common_driver(d), \ + struct phy_driver, mdiodrv) diff --git a/target/linux/generic/backport-5.15/815-v6.4-09-net-phy-marvell-Implement-led_blink_set.patch b/target/linux/generic/backport-5.15/815-v6.4-09-net-phy-marvell-Implement-led_blink_set.patch new file mode 100644 index 0000000000..0f258c6b92 --- /dev/null +++ b/target/linux/generic/backport-5.15/815-v6.4-09-net-phy-marvell-Implement-led_blink_set.patch @@ -0,0 +1,104 @@ +From ea9e86485decb2ac1750005bd96c166c9b780406 Mon Sep 17 00:00:00 2001 +From: Andrew Lunn +Date: Mon, 17 Apr 2023 17:17:31 +0200 +Subject: [PATCH 9/9] net: phy: marvell: Implement led_blink_set() + +The Marvell PHY can blink the LEDs, simple on/off. All LEDs blink at +the same rate, and the reset default is 84ms per blink, which is +around 12Hz. + +Signed-off-by: Andrew Lunn +Signed-off-by: Christian Marangi +Reviewed-by: Florian Fainelli +Signed-off-by: David S. Miller +--- + drivers/net/phy/marvell.c | 36 ++++++++++++++++++++++++++++++++++++ + 1 file changed, 36 insertions(+) + +--- a/drivers/net/phy/marvell.c ++++ b/drivers/net/phy/marvell.c +@@ -147,6 +147,8 @@ + #define MII_88E1318S_PHY_LED_FUNC 0x10 + #define MII_88E1318S_PHY_LED_FUNC_OFF (0x8) + #define MII_88E1318S_PHY_LED_FUNC_ON (0x9) ++#define MII_88E1318S_PHY_LED_FUNC_HI_Z (0xa) ++#define MII_88E1318S_PHY_LED_FUNC_BLINK (0xb) + #define MII_88E1318S_PHY_LED_TCR 0x12 + #define MII_88E1318S_PHY_LED_TCR_FORCE_INT BIT(15) + #define MII_88E1318S_PHY_LED_TCR_INTn_ENABLE BIT(7) +@@ -2823,6 +2825,35 @@ static int m88e1318_led_brightness_set(s + MII_88E1318S_PHY_LED_FUNC, reg); + } + ++static int m88e1318_led_blink_set(struct phy_device *phydev, u8 index, ++ unsigned long *delay_on, ++ unsigned long *delay_off) ++{ ++ int reg; ++ ++ reg = phy_read_paged(phydev, MII_MARVELL_LED_PAGE, ++ MII_88E1318S_PHY_LED_FUNC); ++ if (reg < 0) ++ return reg; ++ ++ switch (index) { ++ case 0: ++ case 1: ++ case 2: ++ reg &= ~(0xf << (4 * index)); ++ reg |= MII_88E1318S_PHY_LED_FUNC_BLINK << (4 * index); ++ /* Reset default is 84ms */ ++ *delay_on = 84 / 2; ++ *delay_off = 84 / 2; ++ break; ++ default: ++ return -EINVAL; ++ } ++ ++ return phy_write_paged(phydev, MII_MARVELL_LED_PAGE, ++ MII_88E1318S_PHY_LED_FUNC, reg); ++} ++ + static int marvell_probe(struct phy_device *phydev) + { + struct marvell_priv *priv; +@@ -3072,6 +3103,7 @@ static struct phy_driver marvell_drivers + .get_strings = marvell_get_strings, + .get_stats = marvell_get_stats, + .led_brightness_set = m88e1318_led_brightness_set, ++ .led_blink_set = m88e1318_led_blink_set, + }, + { + .phy_id = MARVELL_PHY_ID_88E1145, +@@ -3179,6 +3211,7 @@ static struct phy_driver marvell_drivers + .cable_test_tdr_start = marvell_vct5_cable_test_tdr_start, + .cable_test_get_status = marvell_vct7_cable_test_get_status, + .led_brightness_set = m88e1318_led_brightness_set, ++ .led_blink_set = m88e1318_led_blink_set, + }, + { + .phy_id = MARVELL_PHY_ID_88E1540, +@@ -3206,6 +3239,7 @@ static struct phy_driver marvell_drivers + .cable_test_tdr_start = marvell_vct5_cable_test_tdr_start, + .cable_test_get_status = marvell_vct7_cable_test_get_status, + .led_brightness_set = m88e1318_led_brightness_set, ++ .led_blink_set = m88e1318_led_blink_set, + }, + { + .phy_id = MARVELL_PHY_ID_88E1545, +@@ -3233,6 +3267,7 @@ static struct phy_driver marvell_drivers + .cable_test_tdr_start = marvell_vct5_cable_test_tdr_start, + .cable_test_get_status = marvell_vct7_cable_test_get_status, + .led_brightness_set = m88e1318_led_brightness_set, ++ .led_blink_set = m88e1318_led_blink_set, + }, + { + .phy_id = MARVELL_PHY_ID_88E3016, +@@ -3375,6 +3410,7 @@ static struct phy_driver marvell_drivers + .get_tunable = m88e1540_get_tunable, + .set_tunable = m88e1540_set_tunable, + .led_brightness_set = m88e1318_led_brightness_set, ++ .led_blink_set = m88e1318_led_blink_set, + }, + }; + diff --git a/target/linux/generic/backport-5.15/816-v6.4-net-phy-marvell-Fix-inconsistent-indenting-in-led_bl.patch b/target/linux/generic/backport-5.15/816-v6.4-net-phy-marvell-Fix-inconsistent-indenting-in-led_bl.patch new file mode 100644 index 0000000000..c5b611a125 --- /dev/null +++ b/target/linux/generic/backport-5.15/816-v6.4-net-phy-marvell-Fix-inconsistent-indenting-in-led_bl.patch @@ -0,0 +1,38 @@ +From 4774ad841bef97cc51df90195338c5b2573dd4cb Mon Sep 17 00:00:00 2001 +From: Christian Marangi +Date: Sun, 23 Apr 2023 19:28:00 +0200 +Subject: [PATCH] net: phy: marvell: Fix inconsistent indenting in + led_blink_set + +Fix inconsistent indeinting in m88e1318_led_blink_set reported by kernel +test robot, probably done by the presence of an if condition dropped in +later revision of the same code. + +Reported-by: kernel test robot +Link: https://lore.kernel.org/oe-kbuild-all/202304240007.0VEX8QYG-lkp@intel.com/ +Fixes: ea9e86485dec ("net: phy: marvell: Implement led_blink_set()") +Signed-off-by: Christian Marangi +Reviewed-by: Andrew Lunn +Link: https://lore.kernel.org/r/20230423172800.3470-1-ansuelsmth@gmail.com +Signed-off-by: Jakub Kicinski +--- + drivers/net/phy/marvell.c | 8 ++++---- + 1 file changed, 4 insertions(+), 4 deletions(-) + +--- a/drivers/net/phy/marvell.c ++++ b/drivers/net/phy/marvell.c +@@ -2841,10 +2841,10 @@ static int m88e1318_led_blink_set(struct + case 1: + case 2: + reg &= ~(0xf << (4 * index)); +- reg |= MII_88E1318S_PHY_LED_FUNC_BLINK << (4 * index); +- /* Reset default is 84ms */ +- *delay_on = 84 / 2; +- *delay_off = 84 / 2; ++ reg |= MII_88E1318S_PHY_LED_FUNC_BLINK << (4 * index); ++ /* Reset default is 84ms */ ++ *delay_on = 84 / 2; ++ *delay_off = 84 / 2; + break; + default: + return -EINVAL; diff --git a/target/linux/generic/backport-5.15/817-v6.5-01-leds-trigger-netdev-Recheck-NETDEV_LED_MODE_LINKUP-o.patch b/target/linux/generic/backport-5.15/817-v6.5-01-leds-trigger-netdev-Recheck-NETDEV_LED_MODE_LINKUP-o.patch new file mode 100644 index 0000000000..3385023168 --- /dev/null +++ b/target/linux/generic/backport-5.15/817-v6.5-01-leds-trigger-netdev-Recheck-NETDEV_LED_MODE_LINKUP-o.patch @@ -0,0 +1,35 @@ +From cee4bd16c3195a701be683f7da9e88c6e11acb73 Mon Sep 17 00:00:00 2001 +From: Christian Marangi +Date: Wed, 19 Apr 2023 23:07:39 +0200 +Subject: [PATCH 1/5] leds: trigger: netdev: Recheck NETDEV_LED_MODE_LINKUP on + dev rename + +Dev can be renamed also while up for supported device. We currently +wrongly clear the NETDEV_LED_MODE_LINKUP flag on NETDEV_CHANGENAME +event. + +Fix this by rechecking if the carrier is ok on NETDEV_CHANGENAME and +correctly set the NETDEV_LED_MODE_LINKUP bit. + +Fixes: 5f820ed52371 ("leds: trigger: netdev: fix handling on interface rename") +Cc: stable@vger.kernel.org # v5.5+ +Signed-off-by: Christian Marangi +Reviewed-by: Andrew Lunn +Signed-off-by: Lee Jones +Link: https://lore.kernel.org/r/20230419210743.3594-2-ansuelsmth@gmail.com +--- + drivers/leds/trigger/ledtrig-netdev.c | 3 +++ + 1 file changed, 3 insertions(+) + +--- a/drivers/leds/trigger/ledtrig-netdev.c ++++ b/drivers/leds/trigger/ledtrig-netdev.c +@@ -318,6 +318,9 @@ static int netdev_trig_notify(struct not + clear_bit(NETDEV_LED_MODE_LINKUP, &trigger_data->mode); + switch (evt) { + case NETDEV_CHANGENAME: ++ if (netif_carrier_ok(dev)) ++ set_bit(NETDEV_LED_MODE_LINKUP, &trigger_data->mode); ++ fallthrough; + case NETDEV_REGISTER: + if (trigger_data->net_dev) + dev_put(trigger_data->net_dev); diff --git a/target/linux/generic/backport-5.15/817-v6.5-02-leds-trigger-netdev-Drop-NETDEV_LED_MODE_LINKUP-from.patch b/target/linux/generic/backport-5.15/817-v6.5-02-leds-trigger-netdev-Drop-NETDEV_LED_MODE_LINKUP-from.patch new file mode 100644 index 0000000000..3170c26058 --- /dev/null +++ b/target/linux/generic/backport-5.15/817-v6.5-02-leds-trigger-netdev-Drop-NETDEV_LED_MODE_LINKUP-from.patch @@ -0,0 +1,87 @@ +From e2f24cb1b5daf9a4f6f3ba574c1fa74aab9807a4 Mon Sep 17 00:00:00 2001 +From: Christian Marangi +Date: Wed, 19 Apr 2023 23:07:40 +0200 +Subject: [PATCH 2/5] leds: trigger: netdev: Drop NETDEV_LED_MODE_LINKUP from + mode + +Putting NETDEV_LED_MODE_LINKUP in the same list of the netdev trigger +modes is wrong as it's used to set the link state of the device and not +to set a blink mode as it's done by NETDEV_LED_LINK, NETDEV_LED_TX and +NETDEV_LED_RX. It's also wrong to put this state in the same bitmap of the +netdev trigger mode and should be external to it. + +Drop NETDEV_LED_MODE_LINKUP from mode list and convert to a simple bool +that will be true or false based on the carrier link. No functional +change intended. + +Signed-off-by: Christian Marangi +Reviewed-by: Andrew Lunn +Signed-off-by: Lee Jones +Link: https://lore.kernel.org/r/20230419210743.3594-3-ansuelsmth@gmail.com +--- + drivers/leds/trigger/ledtrig-netdev.c | 19 ++++++++----------- + 1 file changed, 8 insertions(+), 11 deletions(-) + +--- a/drivers/leds/trigger/ledtrig-netdev.c ++++ b/drivers/leds/trigger/ledtrig-netdev.c +@@ -50,10 +50,10 @@ struct led_netdev_data { + unsigned int last_activity; + + unsigned long mode; ++ bool carrier_link_up; + #define NETDEV_LED_LINK 0 + #define NETDEV_LED_TX 1 + #define NETDEV_LED_RX 2 +-#define NETDEV_LED_MODE_LINKUP 3 + }; + + enum netdev_led_attr { +@@ -73,9 +73,9 @@ static void set_baseline_state(struct le + if (!led_cdev->blink_brightness) + led_cdev->blink_brightness = led_cdev->max_brightness; + +- if (!test_bit(NETDEV_LED_MODE_LINKUP, &trigger_data->mode)) ++ if (!trigger_data->carrier_link_up) { + led_set_brightness(led_cdev, LED_OFF); +- else { ++ } else { + if (test_bit(NETDEV_LED_LINK, &trigger_data->mode)) + led_set_brightness(led_cdev, + led_cdev->blink_brightness); +@@ -131,10 +131,9 @@ static ssize_t device_name_store(struct + trigger_data->net_dev = + dev_get_by_name(&init_net, trigger_data->device_name); + +- clear_bit(NETDEV_LED_MODE_LINKUP, &trigger_data->mode); ++ trigger_data->carrier_link_up = false; + if (trigger_data->net_dev != NULL) +- if (netif_carrier_ok(trigger_data->net_dev)) +- set_bit(NETDEV_LED_MODE_LINKUP, &trigger_data->mode); ++ trigger_data->carrier_link_up = netif_carrier_ok(trigger_data->net_dev); + + trigger_data->last_activity = 0; + +@@ -315,11 +314,10 @@ static int netdev_trig_notify(struct not + + spin_lock_bh(&trigger_data->lock); + +- clear_bit(NETDEV_LED_MODE_LINKUP, &trigger_data->mode); ++ trigger_data->carrier_link_up = false; + switch (evt) { + case NETDEV_CHANGENAME: +- if (netif_carrier_ok(dev)) +- set_bit(NETDEV_LED_MODE_LINKUP, &trigger_data->mode); ++ trigger_data->carrier_link_up = netif_carrier_ok(dev); + fallthrough; + case NETDEV_REGISTER: + if (trigger_data->net_dev) +@@ -333,8 +331,7 @@ static int netdev_trig_notify(struct not + break; + case NETDEV_UP: + case NETDEV_CHANGE: +- if (netif_carrier_ok(dev)) +- set_bit(NETDEV_LED_MODE_LINKUP, &trigger_data->mode); ++ trigger_data->carrier_link_up = netif_carrier_ok(dev); + break; + } + diff --git a/target/linux/generic/backport-5.15/817-v6.5-03-leds-trigger-netdev-Rename-add-namespace-to-netdev-t.patch b/target/linux/generic/backport-5.15/817-v6.5-03-leds-trigger-netdev-Rename-add-namespace-to-netdev-t.patch new file mode 100644 index 0000000000..19cc1d7c9e --- /dev/null +++ b/target/linux/generic/backport-5.15/817-v6.5-03-leds-trigger-netdev-Rename-add-namespace-to-netdev-t.patch @@ -0,0 +1,149 @@ +From bdec9cb83936e0ac4cb87fed5b49fad0175f7dec Mon Sep 17 00:00:00 2001 +From: Christian Marangi +Date: Wed, 19 Apr 2023 23:07:41 +0200 +Subject: [PATCH 3/5] leds: trigger: netdev: Rename add namespace to netdev + trigger enum modes + +Rename NETDEV trigger enum modes to a more symbolic name and add a +namespace to them. + +Also add __TRIGGER_NETDEV_MAX to identify the max modes of the netdev +trigger. + +This is a cleanup to drop the define and no behaviour change are +intended. + +Signed-off-by: Christian Marangi +Reviewed-by: Andrew Lunn +Signed-off-by: Lee Jones +Link: https://lore.kernel.org/r/20230419210743.3594-4-ansuelsmth@gmail.com +--- + drivers/leds/trigger/ledtrig-netdev.c | 58 ++++++++++++--------------- + 1 file changed, 25 insertions(+), 33 deletions(-) + +--- a/drivers/leds/trigger/ledtrig-netdev.c ++++ b/drivers/leds/trigger/ledtrig-netdev.c +@@ -51,15 +51,15 @@ struct led_netdev_data { + + unsigned long mode; + bool carrier_link_up; +-#define NETDEV_LED_LINK 0 +-#define NETDEV_LED_TX 1 +-#define NETDEV_LED_RX 2 + }; + +-enum netdev_led_attr { +- NETDEV_ATTR_LINK, +- NETDEV_ATTR_TX, +- NETDEV_ATTR_RX ++enum led_trigger_netdev_modes { ++ TRIGGER_NETDEV_LINK = 0, ++ TRIGGER_NETDEV_TX, ++ TRIGGER_NETDEV_RX, ++ ++ /* Keep last */ ++ __TRIGGER_NETDEV_MAX, + }; + + static void set_baseline_state(struct led_netdev_data *trigger_data) +@@ -76,7 +76,7 @@ static void set_baseline_state(struct le + if (!trigger_data->carrier_link_up) { + led_set_brightness(led_cdev, LED_OFF); + } else { +- if (test_bit(NETDEV_LED_LINK, &trigger_data->mode)) ++ if (test_bit(TRIGGER_NETDEV_LINK, &trigger_data->mode)) + led_set_brightness(led_cdev, + led_cdev->blink_brightness); + else +@@ -85,8 +85,8 @@ static void set_baseline_state(struct le + /* If we are looking for RX/TX start periodically + * checking stats + */ +- if (test_bit(NETDEV_LED_TX, &trigger_data->mode) || +- test_bit(NETDEV_LED_RX, &trigger_data->mode)) ++ if (test_bit(TRIGGER_NETDEV_TX, &trigger_data->mode) || ++ test_bit(TRIGGER_NETDEV_RX, &trigger_data->mode)) + schedule_delayed_work(&trigger_data->work, 0); + } + } +@@ -146,20 +146,16 @@ static ssize_t device_name_store(struct + static DEVICE_ATTR_RW(device_name); + + static ssize_t netdev_led_attr_show(struct device *dev, char *buf, +- enum netdev_led_attr attr) ++ enum led_trigger_netdev_modes attr) + { + struct led_netdev_data *trigger_data = led_trigger_get_drvdata(dev); + int bit; + + switch (attr) { +- case NETDEV_ATTR_LINK: +- bit = NETDEV_LED_LINK; +- break; +- case NETDEV_ATTR_TX: +- bit = NETDEV_LED_TX; +- break; +- case NETDEV_ATTR_RX: +- bit = NETDEV_LED_RX; ++ case TRIGGER_NETDEV_LINK: ++ case TRIGGER_NETDEV_TX: ++ case TRIGGER_NETDEV_RX: ++ bit = attr; + break; + default: + return -EINVAL; +@@ -169,7 +165,7 @@ static ssize_t netdev_led_attr_show(stru + } + + static ssize_t netdev_led_attr_store(struct device *dev, const char *buf, +- size_t size, enum netdev_led_attr attr) ++ size_t size, enum led_trigger_netdev_modes attr) + { + struct led_netdev_data *trigger_data = led_trigger_get_drvdata(dev); + unsigned long state; +@@ -181,14 +177,10 @@ static ssize_t netdev_led_attr_store(str + return ret; + + switch (attr) { +- case NETDEV_ATTR_LINK: +- bit = NETDEV_LED_LINK; +- break; +- case NETDEV_ATTR_TX: +- bit = NETDEV_LED_TX; +- break; +- case NETDEV_ATTR_RX: +- bit = NETDEV_LED_RX; ++ case TRIGGER_NETDEV_LINK: ++ case TRIGGER_NETDEV_TX: ++ case TRIGGER_NETDEV_RX: ++ bit = attr; + break; + default: + return -EINVAL; +@@ -360,21 +352,21 @@ static void netdev_trig_work(struct work + } + + /* If we are not looking for RX/TX then return */ +- if (!test_bit(NETDEV_LED_TX, &trigger_data->mode) && +- !test_bit(NETDEV_LED_RX, &trigger_data->mode)) ++ if (!test_bit(TRIGGER_NETDEV_TX, &trigger_data->mode) && ++ !test_bit(TRIGGER_NETDEV_RX, &trigger_data->mode)) + return; + + dev_stats = dev_get_stats(trigger_data->net_dev, &temp); + new_activity = +- (test_bit(NETDEV_LED_TX, &trigger_data->mode) ? ++ (test_bit(TRIGGER_NETDEV_TX, &trigger_data->mode) ? + dev_stats->tx_packets : 0) + +- (test_bit(NETDEV_LED_RX, &trigger_data->mode) ? ++ (test_bit(TRIGGER_NETDEV_RX, &trigger_data->mode) ? + dev_stats->rx_packets : 0); + + if (trigger_data->last_activity != new_activity) { + led_stop_software_blink(trigger_data->led_cdev); + +- invert = test_bit(NETDEV_LED_LINK, &trigger_data->mode); ++ invert = test_bit(TRIGGER_NETDEV_LINK, &trigger_data->mode); + interval = jiffies_to_msecs( + atomic_read(&trigger_data->interval)); + /* base state is ON (link present) */ diff --git a/target/linux/generic/backport-5.15/817-v6.5-04-leds-trigger-netdev-Convert-device-attr-to-macro.patch b/target/linux/generic/backport-5.15/817-v6.5-04-leds-trigger-netdev-Convert-device-attr-to-macro.patch new file mode 100644 index 0000000000..3b45951f57 --- /dev/null +++ b/target/linux/generic/backport-5.15/817-v6.5-04-leds-trigger-netdev-Convert-device-attr-to-macro.patch @@ -0,0 +1,82 @@ +From 164b67d53476a9d114be85c885bd31f783835be4 Mon Sep 17 00:00:00 2001 +From: Christian Marangi +Date: Wed, 19 Apr 2023 23:07:42 +0200 +Subject: [PATCH 4/5] leds: trigger: netdev: Convert device attr to macro + +Convert link tx and rx device attr to a common macro to reduce common +code and in preparation for additional attr. + +Signed-off-by: Christian Marangi +Reviewed-by: Andrew Lunn +Signed-off-by: Lee Jones +Link: https://lore.kernel.org/r/20230419210743.3594-5-ansuelsmth@gmail.com +--- + drivers/leds/trigger/ledtrig-netdev.c | 57 ++++++++------------------- + 1 file changed, 16 insertions(+), 41 deletions(-) + +--- a/drivers/leds/trigger/ledtrig-netdev.c ++++ b/drivers/leds/trigger/ledtrig-netdev.c +@@ -198,47 +198,22 @@ static ssize_t netdev_led_attr_store(str + return size; + } + +-static ssize_t link_show(struct device *dev, +- struct device_attribute *attr, char *buf) +-{ +- return netdev_led_attr_show(dev, buf, NETDEV_ATTR_LINK); +-} +- +-static ssize_t link_store(struct device *dev, +- struct device_attribute *attr, const char *buf, size_t size) +-{ +- return netdev_led_attr_store(dev, buf, size, NETDEV_ATTR_LINK); +-} +- +-static DEVICE_ATTR_RW(link); +- +-static ssize_t tx_show(struct device *dev, +- struct device_attribute *attr, char *buf) +-{ +- return netdev_led_attr_show(dev, buf, NETDEV_ATTR_TX); +-} +- +-static ssize_t tx_store(struct device *dev, +- struct device_attribute *attr, const char *buf, size_t size) +-{ +- return netdev_led_attr_store(dev, buf, size, NETDEV_ATTR_TX); +-} +- +-static DEVICE_ATTR_RW(tx); +- +-static ssize_t rx_show(struct device *dev, +- struct device_attribute *attr, char *buf) +-{ +- return netdev_led_attr_show(dev, buf, NETDEV_ATTR_RX); +-} +- +-static ssize_t rx_store(struct device *dev, +- struct device_attribute *attr, const char *buf, size_t size) +-{ +- return netdev_led_attr_store(dev, buf, size, NETDEV_ATTR_RX); +-} +- +-static DEVICE_ATTR_RW(rx); ++#define DEFINE_NETDEV_TRIGGER(trigger_name, trigger) \ ++ static ssize_t trigger_name##_show(struct device *dev, \ ++ struct device_attribute *attr, char *buf) \ ++ { \ ++ return netdev_led_attr_show(dev, buf, trigger); \ ++ } \ ++ static ssize_t trigger_name##_store(struct device *dev, \ ++ struct device_attribute *attr, const char *buf, size_t size) \ ++ { \ ++ return netdev_led_attr_store(dev, buf, size, trigger); \ ++ } \ ++ static DEVICE_ATTR_RW(trigger_name) ++ ++DEFINE_NETDEV_TRIGGER(link, TRIGGER_NETDEV_LINK); ++DEFINE_NETDEV_TRIGGER(tx, TRIGGER_NETDEV_TX); ++DEFINE_NETDEV_TRIGGER(rx, TRIGGER_NETDEV_RX); + + static ssize_t interval_show(struct device *dev, + struct device_attribute *attr, char *buf) diff --git a/target/linux/generic/backport-5.15/817-v6.5-05-leds-trigger-netdev-Use-mutex-instead-of-spinlocks.patch b/target/linux/generic/backport-5.15/817-v6.5-05-leds-trigger-netdev-Use-mutex-instead-of-spinlocks.patch new file mode 100644 index 0000000000..180bee9612 --- /dev/null +++ b/target/linux/generic/backport-5.15/817-v6.5-05-leds-trigger-netdev-Use-mutex-instead-of-spinlocks.patch @@ -0,0 +1,106 @@ +From d1b9e1391ab2dc80e9db87fe8b2de015c651e4c9 Mon Sep 17 00:00:00 2001 +From: Christian Marangi +Date: Wed, 19 Apr 2023 23:07:43 +0200 +Subject: [PATCH 5/5] leds: trigger: netdev: Use mutex instead of spinlocks + +Some LEDs may require to sleep while doing some operation like setting +brightness and other cleanup. + +For this reason, using a spinlock will cause a sleep under spinlock +warning. + +It should be safe to convert this to a sleepable lock since: +- sysfs read/write can sleep +- netdev_trig_work is a work queue and can sleep +- netdev _trig_notify can sleep + +The spinlock was used when brightness didn't support sleeping, but this +changed and now it supported with brightness_set_blocking(). + +Convert to mutex lock to permit sleeping using brightness_set_blocking(). + +Signed-off-by: Christian Marangi +Reviewed-by: Andrew Lunn +Signed-off-by: Lee Jones +Link: https://lore.kernel.org/r/20230419210743.3594-6-ansuelsmth@gmail.com +--- + drivers/leds/trigger/ledtrig-netdev.c | 18 +++++++++--------- + 1 file changed, 9 insertions(+), 9 deletions(-) + +--- a/drivers/leds/trigger/ledtrig-netdev.c ++++ b/drivers/leds/trigger/ledtrig-netdev.c +@@ -20,7 +20,7 @@ + #include + #include + #include +-#include ++#include + #include + #include "../leds.h" + +@@ -37,7 +37,7 @@ + */ + + struct led_netdev_data { +- spinlock_t lock; ++ struct mutex lock; + + struct delayed_work work; + struct notifier_block notifier; +@@ -97,9 +97,9 @@ static ssize_t device_name_show(struct d + struct led_netdev_data *trigger_data = led_trigger_get_drvdata(dev); + ssize_t len; + +- spin_lock_bh(&trigger_data->lock); ++ mutex_lock(&trigger_data->lock); + len = sprintf(buf, "%s\n", trigger_data->device_name); +- spin_unlock_bh(&trigger_data->lock); ++ mutex_unlock(&trigger_data->lock); + + return len; + } +@@ -115,7 +115,7 @@ static ssize_t device_name_store(struct + + cancel_delayed_work_sync(&trigger_data->work); + +- spin_lock_bh(&trigger_data->lock); ++ mutex_lock(&trigger_data->lock); + + if (trigger_data->net_dev) { + dev_put(trigger_data->net_dev); +@@ -138,7 +138,7 @@ static ssize_t device_name_store(struct + trigger_data->last_activity = 0; + + set_baseline_state(trigger_data); +- spin_unlock_bh(&trigger_data->lock); ++ mutex_unlock(&trigger_data->lock); + + return size; + } +@@ -279,7 +279,7 @@ static int netdev_trig_notify(struct not + + cancel_delayed_work_sync(&trigger_data->work); + +- spin_lock_bh(&trigger_data->lock); ++ mutex_lock(&trigger_data->lock); + + trigger_data->carrier_link_up = false; + switch (evt) { +@@ -304,7 +304,7 @@ static int netdev_trig_notify(struct not + + set_baseline_state(trigger_data); + +- spin_unlock_bh(&trigger_data->lock); ++ mutex_unlock(&trigger_data->lock); + + return NOTIFY_DONE; + } +@@ -365,7 +365,7 @@ static int netdev_trig_activate(struct l + if (!trigger_data) + return -ENOMEM; + +- spin_lock_init(&trigger_data->lock); ++ mutex_init(&trigger_data->lock); + + trigger_data->notifier.notifier_call = netdev_trig_notify; + trigger_data->notifier.priority = 10; diff --git a/target/linux/generic/backport-5.15/818-v6.5-01-leds-add-APIs-for-LEDs-hw-control.patch b/target/linux/generic/backport-5.15/818-v6.5-01-leds-add-APIs-for-LEDs-hw-control.patch new file mode 100644 index 0000000000..ac18611733 --- /dev/null +++ b/target/linux/generic/backport-5.15/818-v6.5-01-leds-add-APIs-for-LEDs-hw-control.patch @@ -0,0 +1,74 @@ +From ed554d3f945179c5b159bddfad7be34b403fe11a Mon Sep 17 00:00:00 2001 +From: Christian Marangi +Date: Mon, 29 May 2023 18:32:31 +0200 +Subject: [PATCH 01/13] leds: add APIs for LEDs hw control + +Add an option to permit LED driver to declare support for a specific +trigger to use hw control and setup the LED to blink based on specific +provided modes. + +Add APIs for LEDs hw control. These functions will be used to activate +hardware control where a LED will use the provided flags, from an +unique defined supported trigger, to setup the LED to be driven by +hardware. + +Add hw_control_is_supported() to ask the LED driver if the requested +mode by the trigger are supported and the LED can be setup to follow +the requested modes. + +Deactivate hardware blink control by setting brightness to LED_OFF via +the brightness_set() callback. + +Signed-off-by: Christian Marangi +Reviewed-by: Andrew Lunn +Signed-off-by: David S. Miller +--- + include/linux/leds.h | 37 +++++++++++++++++++++++++++++++++++++ + 1 file changed, 37 insertions(+) + +--- a/include/linux/leds.h ++++ b/include/linux/leds.h +@@ -164,6 +164,43 @@ struct led_classdev { + + /* LEDs that have private triggers have this set */ + struct led_hw_trigger_type *trigger_type; ++ ++ /* Unique trigger name supported by LED set in hw control mode */ ++ const char *hw_control_trigger; ++ /* ++ * Check if the LED driver supports the requested mode provided by the ++ * defined supported trigger to setup the LED to hw control mode. ++ * ++ * Return 0 on success. Return -EOPNOTSUPP when the passed flags are not ++ * supported and software fallback needs to be used. ++ * Return a negative error number on any other case for check fail due ++ * to various reason like device not ready or timeouts. ++ */ ++ int (*hw_control_is_supported)(struct led_classdev *led_cdev, ++ unsigned long flags); ++ /* ++ * Activate hardware control, LED driver will use the provided flags ++ * from the supported trigger and setup the LED to be driven by hardware ++ * following the requested mode from the trigger flags. ++ * Deactivate hardware blink control by setting brightness to LED_OFF via ++ * the brightness_set() callback. ++ * ++ * Return 0 on success, a negative error number on flags apply fail. ++ */ ++ int (*hw_control_set)(struct led_classdev *led_cdev, ++ unsigned long flags); ++ /* ++ * Get from the LED driver the current mode that the LED is set in hw ++ * control mode and put them in flags. ++ * Trigger can use this to get the initial state of a LED already set in ++ * hardware blink control. ++ * ++ * Return 0 on success, a negative error number on failing parsing the ++ * initial mode. Error from this function is NOT FATAL as the device ++ * may be in a not supported initial state by the attached LED trigger. ++ */ ++ int (*hw_control_get)(struct led_classdev *led_cdev, ++ unsigned long *flags); + #endif + + #ifdef CONFIG_LEDS_BRIGHTNESS_HW_CHANGED diff --git a/target/linux/generic/backport-5.15/818-v6.5-02-leds-add-API-to-get-attached-device-for-LED-hw-contr.patch b/target/linux/generic/backport-5.15/818-v6.5-02-leds-add-API-to-get-attached-device-for-LED-hw-contr.patch new file mode 100644 index 0000000000..1a221727a0 --- /dev/null +++ b/target/linux/generic/backport-5.15/818-v6.5-02-leds-add-API-to-get-attached-device-for-LED-hw-contr.patch @@ -0,0 +1,37 @@ +From 052c38eb17e866c5b4cd43924e7a5e20167b55c0 Mon Sep 17 00:00:00 2001 +From: Andrew Lunn +Date: Mon, 29 May 2023 18:32:32 +0200 +Subject: [PATCH 02/13] leds: add API to get attached device for LED hw control + +Some specific LED triggers blink the LED based on events from a device +or subsystem. +For example, an LED could be blinked to indicate a network device is +receiving packets, or a disk is reading blocks. To correctly enable and +request the hw control of the LED, the trigger has to check if the +network interface or block device configured via a /sys/class/led file +match the one the LED driver provide for hw control for. + +Provide an API call to get the device which the LED blinks for. + +Signed-off-by: Andrew Lunn +Signed-off-by: Christian Marangi +Signed-off-by: David S. Miller +--- + include/linux/leds.h | 6 ++++++ + 1 file changed, 6 insertions(+) + +--- a/include/linux/leds.h ++++ b/include/linux/leds.h +@@ -201,6 +201,12 @@ struct led_classdev { + */ + int (*hw_control_get)(struct led_classdev *led_cdev, + unsigned long *flags); ++ /* ++ * Get the device this LED blinks in response to. ++ * e.g. for a PHY LED, it is the network device. If the LED is ++ * not yet associated to a device, return NULL. ++ */ ++ struct device *(*hw_control_get_device)(struct led_classdev *led_cdev); + #endif + + #ifdef CONFIG_LEDS_BRIGHTNESS_HW_CHANGED diff --git a/target/linux/generic/backport-5.15/818-v6.5-03-Documentation-leds-leds-class-Document-new-Hardware-.patch b/target/linux/generic/backport-5.15/818-v6.5-03-Documentation-leds-leds-class-Document-new-Hardware-.patch new file mode 100644 index 0000000000..af9fb7fdc3 --- /dev/null +++ b/target/linux/generic/backport-5.15/818-v6.5-03-Documentation-leds-leds-class-Document-new-Hardware-.patch @@ -0,0 +1,113 @@ +From 8aa2fd7b66980ecd2e45e95af61cf7eafede1211 Mon Sep 17 00:00:00 2001 +From: Christian Marangi +Date: Mon, 29 May 2023 18:32:33 +0200 +Subject: [PATCH 03/13] Documentation: leds: leds-class: Document new Hardware + driven LEDs APIs + +Document new Hardware driven LEDs APIs. + +Some LEDs can be programmed to be driven by hardware. This is not +limited to blink but also to turn off or on autonomously. +To support this feature, a LED needs to implement various additional +ops and needs to declare specific support for the supported triggers. + +Add documentation for each required value and API to make hw control +possible and implementable by both LEDs and triggers. + +Signed-off-by: Christian Marangi +Reviewed-by: Andrew Lunn +Signed-off-by: David S. Miller +--- + Documentation/leds/leds-class.rst | 81 +++++++++++++++++++++++++++++++ + 1 file changed, 81 insertions(+) + +--- a/Documentation/leds/leds-class.rst ++++ b/Documentation/leds/leds-class.rst +@@ -169,6 +169,87 @@ Setting the brightness to zero with brig + should completely turn off the LED and cancel the previously programmed + hardware blinking function, if any. + ++Hardware driven LEDs ++==================== ++ ++Some LEDs can be programmed to be driven by hardware. This is not ++limited to blink but also to turn off or on autonomously. ++To support this feature, a LED needs to implement various additional ++ops and needs to declare specific support for the supported triggers. ++ ++With hw control we refer to the LED driven by hardware. ++ ++LED driver must define the following value to support hw control: ++ ++ - hw_control_trigger: ++ unique trigger name supported by the LED in hw control ++ mode. ++ ++LED driver must implement the following API to support hw control: ++ - hw_control_is_supported: ++ check if the flags passed by the supported trigger can ++ be parsed and activate hw control on the LED. ++ ++ Return 0 if the passed flags mask is supported and ++ can be set with hw_control_set(). ++ ++ If the passed flags mask is not supported -EOPNOTSUPP ++ must be returned, the LED trigger will use software ++ fallback in this case. ++ ++ Return a negative error in case of any other error like ++ device not ready or timeouts. ++ ++ - hw_control_set: ++ activate hw control. LED driver will use the provided ++ flags passed from the supported trigger, parse them to ++ a set of mode and setup the LED to be driven by hardware ++ following the requested modes. ++ ++ Set LED_OFF via the brightness_set to deactivate hw control. ++ ++ Return 0 on success, a negative error number on failing to ++ apply flags. ++ ++ - hw_control_get: ++ get active modes from a LED already in hw control, parse ++ them and set in flags the current active flags for the ++ supported trigger. ++ ++ Return 0 on success, a negative error number on failing ++ parsing the initial mode. ++ Error from this function is NOT FATAL as the device may ++ be in a not supported initial state by the attached LED ++ trigger. ++ ++ - hw_control_get_device: ++ return the device associated with the LED driver in ++ hw control. A trigger might use this to match the ++ returned device from this function with a configured ++ device for the trigger as the source for blinking ++ events and correctly enable hw control. ++ (example a netdev trigger configured to blink for a ++ particular dev match the returned dev from get_device ++ to set hw control) ++ ++ Returns a pointer to a struct device or NULL if nothing ++ is currently attached. ++ ++LED driver can activate additional modes by default to workaround the ++impossibility of supporting each different mode on the supported trigger. ++Examples are hardcoding the blink speed to a set interval, enable special ++feature like bypassing blink if some requirements are not met. ++ ++A trigger should first check if the hw control API are supported by the LED ++driver and check if the trigger is supported to verify if hw control is possible, ++use hw_control_is_supported to check if the flags are supported and only at ++the end use hw_control_set to activate hw control. ++ ++A trigger can use hw_control_get to check if a LED is already in hw control ++and init their flags. ++ ++When the LED is in hw control, no software blink is possible and doing so ++will effectively disable hw control. + + Known Issues + ============ diff --git a/target/linux/generic/backport-5.15/818-v6.5-04-leds-trigger-netdev-refactor-code-setting-device-nam.patch b/target/linux/generic/backport-5.15/818-v6.5-04-leds-trigger-netdev-refactor-code-setting-device-nam.patch new file mode 100644 index 0000000000..3c804c0b41 --- /dev/null +++ b/target/linux/generic/backport-5.15/818-v6.5-04-leds-trigger-netdev-refactor-code-setting-device-nam.patch @@ -0,0 +1,69 @@ +From 28a6a2ef18ad840a390d519840c303b03040961c Mon Sep 17 00:00:00 2001 +From: Andrew Lunn +Date: Mon, 29 May 2023 18:32:34 +0200 +Subject: [PATCH 04/13] leds: trigger: netdev: refactor code setting device + name + +Move the code into a helper, ready for it to be called at +other times. No intended behaviour change. + +Signed-off-by: Andrew Lunn +Signed-off-by: Christian Marangi +Signed-off-by: David S. Miller +--- + drivers/leds/trigger/ledtrig-netdev.c | 29 ++++++++++++++++++--------- + 1 file changed, 20 insertions(+), 9 deletions(-) + +--- a/drivers/leds/trigger/ledtrig-netdev.c ++++ b/drivers/leds/trigger/ledtrig-netdev.c +@@ -104,15 +104,9 @@ static ssize_t device_name_show(struct d + return len; + } + +-static ssize_t device_name_store(struct device *dev, +- struct device_attribute *attr, const char *buf, +- size_t size) ++static int set_device_name(struct led_netdev_data *trigger_data, ++ const char *name, size_t size) + { +- struct led_netdev_data *trigger_data = led_trigger_get_drvdata(dev); +- +- if (size >= IFNAMSIZ) +- return -EINVAL; +- + cancel_delayed_work_sync(&trigger_data->work); + + mutex_lock(&trigger_data->lock); +@@ -122,7 +116,7 @@ static ssize_t device_name_store(struct + trigger_data->net_dev = NULL; + } + +- memcpy(trigger_data->device_name, buf, size); ++ memcpy(trigger_data->device_name, name, size); + trigger_data->device_name[size] = 0; + if (size > 0 && trigger_data->device_name[size - 1] == '\n') + trigger_data->device_name[size - 1] = 0; +@@ -140,6 +134,23 @@ static ssize_t device_name_store(struct + set_baseline_state(trigger_data); + mutex_unlock(&trigger_data->lock); + ++ return 0; ++} ++ ++static ssize_t device_name_store(struct device *dev, ++ struct device_attribute *attr, const char *buf, ++ size_t size) ++{ ++ struct led_netdev_data *trigger_data = led_trigger_get_drvdata(dev); ++ int ret; ++ ++ if (size >= IFNAMSIZ) ++ return -EINVAL; ++ ++ ret = set_device_name(trigger_data, buf, size); ++ ++ if (ret < 0) ++ return ret; + return size; + } + diff --git a/target/linux/generic/backport-5.15/818-v6.5-05-leds-trigger-netdev-introduce-check-for-possible-hw-.patch b/target/linux/generic/backport-5.15/818-v6.5-05-leds-trigger-netdev-introduce-check-for-possible-hw-.patch new file mode 100644 index 0000000000..284b519482 --- /dev/null +++ b/target/linux/generic/backport-5.15/818-v6.5-05-leds-trigger-netdev-introduce-check-for-possible-hw-.patch @@ -0,0 +1,54 @@ +From 4fd1b6d47a7a38e81fdc6f8be2ccd4216b3f93db Mon Sep 17 00:00:00 2001 +From: Christian Marangi +Date: Mon, 29 May 2023 18:32:35 +0200 +Subject: [PATCH 05/13] leds: trigger: netdev: introduce check for possible hw + control + +Introduce function to check if the requested mode can use hw control in +preparation for hw control support. Currently everything is handled in +software so can_hw_control will always return false. + +Add knob with the new value hw_control in trigger_data struct to +set hw control possible. Useful for future implementation to implement +in set_baseline_state() the required function to set the requested mode +using LEDs hw control ops and in other function to reject set if hw +control is currently active. + +Signed-off-by: Christian Marangi +Reviewed-by: Andrew Lunn +Signed-off-by: David S. Miller +--- + drivers/leds/trigger/ledtrig-netdev.c | 8 ++++++++ + 1 file changed, 8 insertions(+) + +--- a/drivers/leds/trigger/ledtrig-netdev.c ++++ b/drivers/leds/trigger/ledtrig-netdev.c +@@ -51,6 +51,7 @@ struct led_netdev_data { + + unsigned long mode; + bool carrier_link_up; ++ bool hw_control; + }; + + enum led_trigger_netdev_modes { +@@ -91,6 +92,11 @@ static void set_baseline_state(struct le + } + } + ++static bool can_hw_control(struct led_netdev_data *trigger_data) ++{ ++ return false; ++} ++ + static ssize_t device_name_show(struct device *dev, + struct device_attribute *attr, char *buf) + { +@@ -204,6 +210,8 @@ static ssize_t netdev_led_attr_store(str + else + clear_bit(bit, &trigger_data->mode); + ++ trigger_data->hw_control = can_hw_control(trigger_data); ++ + set_baseline_state(trigger_data); + + return size; diff --git a/target/linux/generic/backport-5.15/818-v6.5-06-leds-trigger-netdev-add-basic-check-for-hw-control-s.patch b/target/linux/generic/backport-5.15/818-v6.5-06-leds-trigger-netdev-add-basic-check-for-hw-control-s.patch new file mode 100644 index 0000000000..09759bc623 --- /dev/null +++ b/target/linux/generic/backport-5.15/818-v6.5-06-leds-trigger-netdev-add-basic-check-for-hw-control-s.patch @@ -0,0 +1,42 @@ +From 6352f25f9fadba59d5df2ba7139495759ccc81d5 Mon Sep 17 00:00:00 2001 +From: Christian Marangi +Date: Mon, 29 May 2023 18:32:36 +0200 +Subject: [PATCH 06/13] leds: trigger: netdev: add basic check for hw control + support + +Add basic check for hw control support. Check if the required API are +defined and check if the defined trigger supported in hw control for the +LED driver match netdev. + +Signed-off-by: Christian Marangi +Reviewed-by: Andrew Lunn +Signed-off-by: David S. Miller +--- + drivers/leds/trigger/ledtrig-netdev.c | 14 ++++++++++++++ + 1 file changed, 14 insertions(+) + +--- a/drivers/leds/trigger/ledtrig-netdev.c ++++ b/drivers/leds/trigger/ledtrig-netdev.c +@@ -92,8 +92,22 @@ static void set_baseline_state(struct le + } + } + ++static bool supports_hw_control(struct led_classdev *led_cdev) ++{ ++ if (!led_cdev->hw_control_get || !led_cdev->hw_control_set || ++ !led_cdev->hw_control_is_supported) ++ return false; ++ ++ return !strcmp(led_cdev->hw_control_trigger, led_cdev->trigger->name); ++} ++ + static bool can_hw_control(struct led_netdev_data *trigger_data) + { ++ struct led_classdev *led_cdev = trigger_data->led_cdev; ++ ++ if (!supports_hw_control(led_cdev)) ++ return false; ++ + return false; + } + diff --git a/target/linux/generic/backport-5.15/818-v6.5-07-leds-trigger-netdev-reject-interval-store-for-hw_con.patch b/target/linux/generic/backport-5.15/818-v6.5-07-leds-trigger-netdev-reject-interval-store-for-hw_con.patch new file mode 100644 index 0000000000..6634906800 --- /dev/null +++ b/target/linux/generic/backport-5.15/818-v6.5-07-leds-trigger-netdev-reject-interval-store-for-hw_con.patch @@ -0,0 +1,28 @@ +From c84c80c7388f887b10dafd70fc55bc6c5fe9fa5a Mon Sep 17 00:00:00 2001 +From: Christian Marangi +Date: Mon, 29 May 2023 18:32:37 +0200 +Subject: [PATCH 07/13] leds: trigger: netdev: reject interval store for + hw_control + +Reject interval store with hw_control enabled. It's are currently not +supported and MUST be set to the default value with hw control enabled. + +Signed-off-by: Christian Marangi +Reviewed-by: Andrew Lunn +Signed-off-by: David S. Miller +--- + drivers/leds/trigger/ledtrig-netdev.c | 3 +++ + 1 file changed, 3 insertions(+) + +--- a/drivers/leds/trigger/ledtrig-netdev.c ++++ b/drivers/leds/trigger/ledtrig-netdev.c +@@ -265,6 +265,9 @@ static ssize_t interval_store(struct dev + unsigned long value; + int ret; + ++ if (trigger_data->hw_control) ++ return -EINVAL; ++ + ret = kstrtoul(buf, 0, &value); + if (ret) + return ret; diff --git a/target/linux/generic/backport-5.15/818-v6.5-08-leds-trigger-netdev-add-support-for-LED-hw-control.patch b/target/linux/generic/backport-5.15/818-v6.5-08-leds-trigger-netdev-add-support-for-LED-hw-control.patch new file mode 100644 index 0000000000..52faa4809b --- /dev/null +++ b/target/linux/generic/backport-5.15/818-v6.5-08-leds-trigger-netdev-add-support-for-LED-hw-control.patch @@ -0,0 +1,107 @@ +From 7c145a34ba6e380616af93262fcab9fc7261d851 Mon Sep 17 00:00:00 2001 +From: Christian Marangi +Date: Mon, 29 May 2023 18:32:38 +0200 +Subject: [PATCH 08/13] leds: trigger: netdev: add support for LED hw control + +Add support for LED hw control for the netdev trigger. + +The trigger on calling set_baseline_state to configure a new mode, will +do various check to verify if hw control can be used for the requested +mode in can_hw_control() function. + +It will first check if the LED driver supports hw control for the netdev +trigger, then will use hw_control_is_supported() and finally will call +hw_control_set() to apply the requested mode. + +To use such mode, interval MUST be set to the default value and net_dev +MUST be set. If one of these 2 value are not valid, hw control will +never be used and normal software fallback is used. + +The default interval value is moved to a define to make sure they are +always synced. + +Signed-off-by: Christian Marangi +Reviewed-by: Andrew Lunn +Signed-off-by: David S. Miller +--- + drivers/leds/trigger/ledtrig-netdev.c | 43 +++++++++++++++++++++++++-- + 1 file changed, 41 insertions(+), 2 deletions(-) + +--- a/drivers/leds/trigger/ledtrig-netdev.c ++++ b/drivers/leds/trigger/ledtrig-netdev.c +@@ -24,6 +24,8 @@ + #include + #include "../leds.h" + ++#define NETDEV_LED_DEFAULT_INTERVAL 50 ++ + /* + * Configurable sysfs attributes: + * +@@ -68,6 +70,13 @@ static void set_baseline_state(struct le + int current_brightness; + struct led_classdev *led_cdev = trigger_data->led_cdev; + ++ /* Already validated, hw control is possible with the requested mode */ ++ if (trigger_data->hw_control) { ++ led_cdev->hw_control_set(led_cdev, trigger_data->mode); ++ ++ return; ++ } ++ + current_brightness = led_cdev->brightness; + if (current_brightness) + led_cdev->blink_brightness = current_brightness; +@@ -103,12 +112,42 @@ static bool supports_hw_control(struct l + + static bool can_hw_control(struct led_netdev_data *trigger_data) + { ++ unsigned long default_interval = msecs_to_jiffies(NETDEV_LED_DEFAULT_INTERVAL); ++ unsigned int interval = atomic_read(&trigger_data->interval); + struct led_classdev *led_cdev = trigger_data->led_cdev; ++ int ret; + + if (!supports_hw_control(led_cdev)) + return false; + +- return false; ++ /* ++ * Interval must be set to the default ++ * value. Any different value is rejected if in hw ++ * control. ++ */ ++ if (interval != default_interval) ++ return false; ++ ++ /* ++ * net_dev must be set with hw control, otherwise no ++ * blinking can be happening and there is nothing to ++ * offloaded. ++ */ ++ if (!trigger_data->net_dev) ++ return false; ++ ++ /* Check if the requested mode is supported */ ++ ret = led_cdev->hw_control_is_supported(led_cdev, trigger_data->mode); ++ /* Fall back to software blinking if not supported */ ++ if (ret == -EOPNOTSUPP) ++ return false; ++ if (ret) { ++ dev_warn(led_cdev->dev, ++ "Current mode check failed with error %d\n", ret); ++ return false; ++ } ++ ++ return true; + } + + static ssize_t device_name_show(struct device *dev, +@@ -413,7 +452,7 @@ static int netdev_trig_activate(struct l + trigger_data->device_name[0] = 0; + + trigger_data->mode = 0; +- atomic_set(&trigger_data->interval, msecs_to_jiffies(50)); ++ atomic_set(&trigger_data->interval, msecs_to_jiffies(NETDEV_LED_DEFAULT_INTERVAL)); + trigger_data->last_activity = 0; + + led_set_trigger_data(led_cdev, trigger_data); diff --git a/target/linux/generic/backport-5.15/818-v6.5-09-leds-trigger-netdev-validate-configured-netdev.patch b/target/linux/generic/backport-5.15/818-v6.5-09-leds-trigger-netdev-validate-configured-netdev.patch new file mode 100644 index 0000000000..c129ffa4f5 --- /dev/null +++ b/target/linux/generic/backport-5.15/818-v6.5-09-leds-trigger-netdev-validate-configured-netdev.patch @@ -0,0 +1,58 @@ +From 33ec0b53befff2c0a7f3aa19ff08556d60585d6b Mon Sep 17 00:00:00 2001 +From: Andrew Lunn +Date: Mon, 29 May 2023 18:32:39 +0200 +Subject: [PATCH 09/13] leds: trigger: netdev: validate configured netdev + +The netdev which the LED should blink for is configurable in +/sys/class/led/foo/device_name. Ensure when offloading that the +configured netdev is the same as the netdev the LED is associated +with. If it is not, only perform software blinking. + +Signed-off-by: Andrew Lunn +Signed-off-by: Christian Marangi +Signed-off-by: David S. Miller +--- + drivers/leds/trigger/ledtrig-netdev.c | 24 ++++++++++++++++++++++-- + 1 file changed, 22 insertions(+), 2 deletions(-) + +--- a/drivers/leds/trigger/ledtrig-netdev.c ++++ b/drivers/leds/trigger/ledtrig-netdev.c +@@ -110,6 +110,24 @@ static bool supports_hw_control(struct l + return !strcmp(led_cdev->hw_control_trigger, led_cdev->trigger->name); + } + ++/* ++ * Validate the configured netdev is the same as the one associated with ++ * the LED driver in hw control. ++ */ ++static bool validate_net_dev(struct led_classdev *led_cdev, ++ struct net_device *net_dev) ++{ ++ struct device *dev = led_cdev->hw_control_get_device(led_cdev); ++ struct net_device *ndev; ++ ++ if (!dev) ++ return false; ++ ++ ndev = to_net_dev(dev); ++ ++ return ndev == net_dev; ++} ++ + static bool can_hw_control(struct led_netdev_data *trigger_data) + { + unsigned long default_interval = msecs_to_jiffies(NETDEV_LED_DEFAULT_INTERVAL); +@@ -131,9 +149,11 @@ static bool can_hw_control(struct led_ne + /* + * net_dev must be set with hw control, otherwise no + * blinking can be happening and there is nothing to +- * offloaded. ++ * offloaded. Additionally, for hw control to be ++ * valid, the configured netdev must be the same as ++ * netdev associated to the LED. + */ +- if (!trigger_data->net_dev) ++ if (!validate_net_dev(led_cdev, trigger_data->net_dev)) + return false; + + /* Check if the requested mode is supported */ diff --git a/target/linux/generic/backport-5.15/818-v6.5-10-leds-trigger-netdev-init-mode-if-hw-control-already-.patch b/target/linux/generic/backport-5.15/818-v6.5-10-leds-trigger-netdev-init-mode-if-hw-control-already-.patch new file mode 100644 index 0000000000..e20594c99a --- /dev/null +++ b/target/linux/generic/backport-5.15/818-v6.5-10-leds-trigger-netdev-init-mode-if-hw-control-already-.patch @@ -0,0 +1,53 @@ +From 0316cc5629d15880dd3f097d221c55ca648bcd61 Mon Sep 17 00:00:00 2001 +From: Christian Marangi +Date: Mon, 29 May 2023 18:32:40 +0200 +Subject: [PATCH 10/13] leds: trigger: netdev: init mode if hw control already + active + +On netdev trigger activation, hw control may be already active by +default. If this is the case and a device is actually provided by +hw_control_get_device(), init the already active mode and set the +bool to hw_control bool to true to reflect the already set mode in the +trigger_data. + +Co-developed-by: Andrew Lunn +Signed-off-by: Andrew Lunn +Signed-off-by: Christian Marangi +Signed-off-by: David S. Miller +--- + drivers/leds/trigger/ledtrig-netdev.c | 17 +++++++++++++++++ + 1 file changed, 17 insertions(+) + +--- a/drivers/leds/trigger/ledtrig-netdev.c ++++ b/drivers/leds/trigger/ledtrig-netdev.c +@@ -454,6 +454,8 @@ static void netdev_trig_work(struct work + static int netdev_trig_activate(struct led_classdev *led_cdev) + { + struct led_netdev_data *trigger_data; ++ unsigned long mode; ++ struct device *dev; + int rc; + + trigger_data = kzalloc(sizeof(struct led_netdev_data), GFP_KERNEL); +@@ -475,6 +477,21 @@ static int netdev_trig_activate(struct l + atomic_set(&trigger_data->interval, msecs_to_jiffies(NETDEV_LED_DEFAULT_INTERVAL)); + trigger_data->last_activity = 0; + ++ /* Check if hw control is active by default on the LED. ++ * Init already enabled mode in hw control. ++ */ ++ if (supports_hw_control(led_cdev) && ++ !led_cdev->hw_control_get(led_cdev, &mode)) { ++ dev = led_cdev->hw_control_get_device(led_cdev); ++ if (dev) { ++ const char *name = dev_name(dev); ++ ++ set_device_name(trigger_data, name, strlen(name)); ++ trigger_data->hw_control = true; ++ trigger_data->mode = mode; ++ } ++ } ++ + led_set_trigger_data(led_cdev, trigger_data); + + rc = register_netdevice_notifier(&trigger_data->notifier); diff --git a/target/linux/generic/backport-5.15/818-v6.5-11-leds-trigger-netdev-expose-netdev-trigger-modes-in-l.patch b/target/linux/generic/backport-5.15/818-v6.5-11-leds-trigger-netdev-expose-netdev-trigger-modes-in-l.patch new file mode 100644 index 0000000000..70aed850d1 --- /dev/null +++ b/target/linux/generic/backport-5.15/818-v6.5-11-leds-trigger-netdev-expose-netdev-trigger-modes-in-l.patch @@ -0,0 +1,54 @@ +From 947acacab5ea151291b861cdfbde16ff5cf1b08c Mon Sep 17 00:00:00 2001 +From: Christian Marangi +Date: Mon, 29 May 2023 18:32:41 +0200 +Subject: [PATCH 11/13] leds: trigger: netdev: expose netdev trigger modes in + linux include + +Expose netdev trigger modes to make them accessible by LED driver that +will support netdev trigger for hw control. + +Signed-off-by: Christian Marangi +Reviewed-by: Andrew Lunn +Signed-off-by: David S. Miller +--- + drivers/leds/trigger/ledtrig-netdev.c | 9 --------- + include/linux/leds.h | 10 ++++++++++ + 2 files changed, 10 insertions(+), 9 deletions(-) + +--- a/drivers/leds/trigger/ledtrig-netdev.c ++++ b/drivers/leds/trigger/ledtrig-netdev.c +@@ -56,15 +56,6 @@ struct led_netdev_data { + bool hw_control; + }; + +-enum led_trigger_netdev_modes { +- TRIGGER_NETDEV_LINK = 0, +- TRIGGER_NETDEV_TX, +- TRIGGER_NETDEV_RX, +- +- /* Keep last */ +- __TRIGGER_NETDEV_MAX, +-}; +- + static void set_baseline_state(struct led_netdev_data *trigger_data) + { + int current_brightness; +--- a/include/linux/leds.h ++++ b/include/linux/leds.h +@@ -527,6 +527,16 @@ static inline void *led_get_trigger_data + + #endif /* CONFIG_LEDS_TRIGGERS */ + ++/* Trigger specific enum */ ++enum led_trigger_netdev_modes { ++ TRIGGER_NETDEV_LINK = 0, ++ TRIGGER_NETDEV_TX, ++ TRIGGER_NETDEV_RX, ++ ++ /* Keep last */ ++ __TRIGGER_NETDEV_MAX, ++}; ++ + /* Trigger specific functions */ + #ifdef CONFIG_LEDS_TRIGGER_DISK + void ledtrig_disk_activity(bool write); diff --git a/target/linux/generic/backport-5.15/818-v6.5-12-net-dsa-qca8k-implement-hw_control-ops.patch b/target/linux/generic/backport-5.15/818-v6.5-12-net-dsa-qca8k-implement-hw_control-ops.patch new file mode 100644 index 0000000000..ad76d89b7b --- /dev/null +++ b/target/linux/generic/backport-5.15/818-v6.5-12-net-dsa-qca8k-implement-hw_control-ops.patch @@ -0,0 +1,200 @@ +From e0256648c831af13cbfe4a1787327fcec01c2807 Mon Sep 17 00:00:00 2001 +From: Christian Marangi +Date: Mon, 29 May 2023 18:32:42 +0200 +Subject: [PATCH 12/13] net: dsa: qca8k: implement hw_control ops + +Implement hw_control ops to drive Switch LEDs based on hardware events. + +Netdev trigger is the declared supported trigger for hw control +operation and supports the following mode: +- tx +- rx + +When hw_control_set is called, LEDs are set to follow the requested +mode. +Each LEDs will blink at 4Hz by default. + +Signed-off-by: Christian Marangi +Reviewed-by: Andrew Lunn +Signed-off-by: David S. Miller +--- + drivers/net/dsa/qca/qca8k-leds.c | 154 +++++++++++++++++++++++++++++++ + 1 file changed, 154 insertions(+) + +--- a/drivers/net/dsa/qca/qca8k-leds.c ++++ b/drivers/net/dsa/qca/qca8k-leds.c +@@ -32,6 +32,43 @@ qca8k_get_enable_led_reg(int port_num, i + } + + static int ++qca8k_get_control_led_reg(int port_num, int led_num, struct qca8k_led_pattern_en *reg_info) ++{ ++ reg_info->reg = QCA8K_LED_CTRL_REG(led_num); ++ ++ /* 6 total control rule: ++ * 3 control rules for phy0-3 that applies to all their leds ++ * 3 control rules for phy4 ++ */ ++ if (port_num == 4) ++ reg_info->shift = QCA8K_LED_PHY4_CONTROL_RULE_SHIFT; ++ else ++ reg_info->shift = QCA8K_LED_PHY0123_CONTROL_RULE_SHIFT; ++ ++ return 0; ++} ++ ++static int ++qca8k_parse_netdev(unsigned long rules, u32 *offload_trigger) ++{ ++ /* Parsing specific to netdev trigger */ ++ if (test_bit(TRIGGER_NETDEV_TX, &rules)) ++ *offload_trigger |= QCA8K_LED_TX_BLINK_MASK; ++ if (test_bit(TRIGGER_NETDEV_RX, &rules)) ++ *offload_trigger |= QCA8K_LED_RX_BLINK_MASK; ++ ++ if (rules && !*offload_trigger) ++ return -EOPNOTSUPP; ++ ++ /* Enable some default rule by default to the requested mode: ++ * - Blink at 4Hz by default ++ */ ++ *offload_trigger |= QCA8K_LED_BLINK_4HZ; ++ ++ return 0; ++} ++ ++static int + qca8k_led_brightness_set(struct qca8k_led *led, + enum led_brightness brightness) + { +@@ -165,6 +202,119 @@ qca8k_cled_blink_set(struct led_classdev + } + + static int ++qca8k_cled_trigger_offload(struct led_classdev *ldev, bool enable) ++{ ++ struct qca8k_led *led = container_of(ldev, struct qca8k_led, cdev); ++ ++ struct qca8k_led_pattern_en reg_info; ++ struct qca8k_priv *priv = led->priv; ++ u32 mask, val = QCA8K_LED_ALWAYS_OFF; ++ ++ qca8k_get_enable_led_reg(led->port_num, led->led_num, ®_info); ++ ++ if (enable) ++ val = QCA8K_LED_RULE_CONTROLLED; ++ ++ if (led->port_num == 0 || led->port_num == 4) { ++ mask = QCA8K_LED_PATTERN_EN_MASK; ++ val <<= QCA8K_LED_PATTERN_EN_SHIFT; ++ } else { ++ mask = QCA8K_LED_PHY123_PATTERN_EN_MASK; ++ } ++ ++ return regmap_update_bits(priv->regmap, reg_info.reg, mask << reg_info.shift, ++ val << reg_info.shift); ++} ++ ++static bool ++qca8k_cled_hw_control_status(struct led_classdev *ldev) ++{ ++ struct qca8k_led *led = container_of(ldev, struct qca8k_led, cdev); ++ ++ struct qca8k_led_pattern_en reg_info; ++ struct qca8k_priv *priv = led->priv; ++ u32 val; ++ ++ qca8k_get_enable_led_reg(led->port_num, led->led_num, ®_info); ++ ++ regmap_read(priv->regmap, reg_info.reg, &val); ++ ++ val >>= reg_info.shift; ++ ++ if (led->port_num == 0 || led->port_num == 4) { ++ val &= QCA8K_LED_PATTERN_EN_MASK; ++ val >>= QCA8K_LED_PATTERN_EN_SHIFT; ++ } else { ++ val &= QCA8K_LED_PHY123_PATTERN_EN_MASK; ++ } ++ ++ return val == QCA8K_LED_RULE_CONTROLLED; ++} ++ ++static int ++qca8k_cled_hw_control_is_supported(struct led_classdev *ldev, unsigned long rules) ++{ ++ u32 offload_trigger = 0; ++ ++ return qca8k_parse_netdev(rules, &offload_trigger); ++} ++ ++static int ++qca8k_cled_hw_control_set(struct led_classdev *ldev, unsigned long rules) ++{ ++ struct qca8k_led *led = container_of(ldev, struct qca8k_led, cdev); ++ struct qca8k_led_pattern_en reg_info; ++ struct qca8k_priv *priv = led->priv; ++ u32 offload_trigger = 0; ++ int ret; ++ ++ ret = qca8k_parse_netdev(rules, &offload_trigger); ++ if (ret) ++ return ret; ++ ++ ret = qca8k_cled_trigger_offload(ldev, true); ++ if (ret) ++ return ret; ++ ++ qca8k_get_control_led_reg(led->port_num, led->led_num, ®_info); ++ ++ return regmap_update_bits(priv->regmap, reg_info.reg, ++ QCA8K_LED_RULE_MASK << reg_info.shift, ++ offload_trigger << reg_info.shift); ++} ++ ++static int ++qca8k_cled_hw_control_get(struct led_classdev *ldev, unsigned long *rules) ++{ ++ struct qca8k_led *led = container_of(ldev, struct qca8k_led, cdev); ++ struct qca8k_led_pattern_en reg_info; ++ struct qca8k_priv *priv = led->priv; ++ u32 val; ++ int ret; ++ ++ /* With hw control not active return err */ ++ if (!qca8k_cled_hw_control_status(ldev)) ++ return -EINVAL; ++ ++ qca8k_get_control_led_reg(led->port_num, led->led_num, ®_info); ++ ++ ret = regmap_read(priv->regmap, reg_info.reg, &val); ++ if (ret) ++ return ret; ++ ++ val >>= reg_info.shift; ++ val &= QCA8K_LED_RULE_MASK; ++ ++ /* Parsing specific to netdev trigger */ ++ if (val & QCA8K_LED_TX_BLINK_MASK) ++ set_bit(TRIGGER_NETDEV_TX, rules); ++ if (val & QCA8K_LED_RX_BLINK_MASK) ++ set_bit(TRIGGER_NETDEV_RX, rules); ++ ++ return 0; ++} ++ ++static int + qca8k_parse_port_leds(struct qca8k_priv *priv, struct fwnode_handle *port, int port_num) + { + struct fwnode_handle *led = NULL, *leds = NULL; +@@ -224,6 +374,10 @@ qca8k_parse_port_leds(struct qca8k_priv + port_led->cdev.max_brightness = 1; + port_led->cdev.brightness_set_blocking = qca8k_cled_brightness_set_blocking; + port_led->cdev.blink_set = qca8k_cled_blink_set; ++ port_led->cdev.hw_control_is_supported = qca8k_cled_hw_control_is_supported; ++ port_led->cdev.hw_control_set = qca8k_cled_hw_control_set; ++ port_led->cdev.hw_control_get = qca8k_cled_hw_control_get; ++ port_led->cdev.hw_control_trigger = "netdev"; + init_data.default_label = ":port"; + init_data.fwnode = led; + init_data.devname_mandatory = true; diff --git a/target/linux/generic/backport-5.15/818-v6.5-13-net-dsa-qca8k-add-op-to-get-ports-netdev.patch b/target/linux/generic/backport-5.15/818-v6.5-13-net-dsa-qca8k-add-op-to-get-ports-netdev.patch new file mode 100644 index 0000000000..feb6b9e1e4 --- /dev/null +++ b/target/linux/generic/backport-5.15/818-v6.5-13-net-dsa-qca8k-add-op-to-get-ports-netdev.patch @@ -0,0 +1,70 @@ +From 4f53c27f772e27e4cf4e5507d6f4d5980002cb6a Mon Sep 17 00:00:00 2001 +From: Andrew Lunn +Date: Mon, 29 May 2023 18:32:43 +0200 +Subject: [PATCH 13/13] net: dsa: qca8k: add op to get ports netdev + +In order that the LED trigger can blink the switch MAC ports LED, it +needs to know the netdev associated to the port. Add the callback to +return the struct device of the netdev. + +Add an helper function qca8k_phy_to_port() to convert the phy back to +dsa_port index, as we reference LED port based on the internal PHY +index and needs to be converted back. + +Signed-off-by: Andrew Lunn +Signed-off-by: Christian Marangi +Signed-off-by: David S. Miller +--- + drivers/net/dsa/qca/qca8k-leds.c | 27 +++++++++++++++++++++++++++ + 1 file changed, 27 insertions(+) + +--- a/drivers/net/dsa/qca/qca8k-leds.c ++++ b/drivers/net/dsa/qca/qca8k-leds.c +@@ -5,6 +5,18 @@ + #include "qca8k.h" + #include "qca8k_leds.h" + ++static u32 qca8k_phy_to_port(int phy) ++{ ++ /* Internal PHY 0 has port at index 1. ++ * Internal PHY 1 has port at index 2. ++ * Internal PHY 2 has port at index 3. ++ * Internal PHY 3 has port at index 4. ++ * Internal PHY 4 has port at index 5. ++ */ ++ ++ return phy + 1; ++} ++ + static int + qca8k_get_enable_led_reg(int port_num, int led_num, struct qca8k_led_pattern_en *reg_info) + { +@@ -314,6 +326,20 @@ qca8k_cled_hw_control_get(struct led_cla + return 0; + } + ++static struct device *qca8k_cled_hw_control_get_device(struct led_classdev *ldev) ++{ ++ struct qca8k_led *led = container_of(ldev, struct qca8k_led, cdev); ++ struct qca8k_priv *priv = led->priv; ++ struct dsa_port *dp; ++ ++ dp = dsa_to_port(priv->ds, qca8k_phy_to_port(led->port_num)); ++ if (!dp) ++ return NULL; ++ if (dp->slave) ++ return &dp->slave->dev; ++ return NULL; ++} ++ + static int + qca8k_parse_port_leds(struct qca8k_priv *priv, struct fwnode_handle *port, int port_num) + { +@@ -377,6 +403,7 @@ qca8k_parse_port_leds(struct qca8k_priv + port_led->cdev.hw_control_is_supported = qca8k_cled_hw_control_is_supported; + port_led->cdev.hw_control_set = qca8k_cled_hw_control_set; + port_led->cdev.hw_control_get = qca8k_cled_hw_control_get; ++ port_led->cdev.hw_control_get_device = qca8k_cled_hw_control_get_device; + port_led->cdev.hw_control_trigger = "netdev"; + init_data.default_label = ":port"; + init_data.fwnode = led; diff --git a/target/linux/generic/backport-6.1/800-v6.3-leds-Move-led_init_default_state_get-to-the-global-h.patch b/target/linux/generic/backport-6.1/800-v6.3-leds-Move-led_init_default_state_get-to-the-global-h.patch new file mode 100644 index 0000000000..592111fb95 --- /dev/null +++ b/target/linux/generic/backport-6.1/800-v6.3-leds-Move-led_init_default_state_get-to-the-global-h.patch @@ -0,0 +1,39 @@ +From 156a5bb89ca6f3edd2be0bfd0de15e575442927e Mon Sep 17 00:00:00 2001 +From: Andy Shevchenko +Date: Tue, 3 Jan 2023 15:12:47 +0200 +Subject: [PATCH] leds: Move led_init_default_state_get() to the global header + +There are users inside and outside LED framework that have implemented +a local copy of led_init_default_state_get(). In order to deduplicate +that, as the first step move the declaration from LED header to the +global one. + +Signed-off-by: Andy Shevchenko +Signed-off-by: Lee Jones +Link: https://lore.kernel.org/r/20230103131256.33894-3-andriy.shevchenko@linux.intel.com +--- + drivers/leds/leds.h | 1 - + include/linux/leds.h | 2 ++ + 2 files changed, 2 insertions(+), 1 deletion(-) + +--- a/drivers/leds/leds.h ++++ b/drivers/leds/leds.h +@@ -27,7 +27,6 @@ ssize_t led_trigger_read(struct file *fi + ssize_t led_trigger_write(struct file *filp, struct kobject *kobj, + struct bin_attribute *bin_attr, char *buf, + loff_t pos, size_t count); +-enum led_default_state led_init_default_state_get(struct fwnode_handle *fwnode); + + extern struct rw_semaphore leds_list_lock; + extern struct list_head leds_list; +--- a/include/linux/leds.h ++++ b/include/linux/leds.h +@@ -63,6 +63,8 @@ struct led_init_data { + bool devname_mandatory; + }; + ++enum led_default_state led_init_default_state_get(struct fwnode_handle *fwnode); ++ + struct led_hw_trigger_type { + int dummy; + }; diff --git a/target/linux/generic/backport-6.1/801-v6.4-01-net-dsa-qca8k-move-qca8k_port_to_phy-to-header.patch b/target/linux/generic/backport-6.1/801-v6.4-01-net-dsa-qca8k-move-qca8k_port_to_phy-to-header.patch new file mode 100644 index 0000000000..e336fb81ba --- /dev/null +++ b/target/linux/generic/backport-6.1/801-v6.4-01-net-dsa-qca8k-move-qca8k_port_to_phy-to-header.patch @@ -0,0 +1,67 @@ +From 3e8b4d6277fd19d98c817576954dd6a4ff3caa2b Mon Sep 17 00:00:00 2001 +From: Christian Marangi +Date: Mon, 17 Apr 2023 17:17:23 +0200 +Subject: [PATCH 1/9] net: dsa: qca8k: move qca8k_port_to_phy() to header + +Move qca8k_port_to_phy() to qca8k header as it's useful for future +reference in Switch LEDs module since the same logic is applied to get +the right index of the switch port. +Make it inline as it's simple function that just decrease the port. + +Signed-off-by: Christian Marangi +Reviewed-by: Andrew Lunn +Reviewed-by: Michal Kubiak +Reviewed-by: Florian Fainelli +Signed-off-by: David S. Miller +--- + drivers/net/dsa/qca/qca8k-8xxx.c | 15 --------------- + drivers/net/dsa/qca/qca8k.h | 14 ++++++++++++++ + 2 files changed, 14 insertions(+), 15 deletions(-) + +--- a/drivers/net/dsa/qca/qca8k-8xxx.c ++++ b/drivers/net/dsa/qca/qca8k-8xxx.c +@@ -716,21 +716,6 @@ err_clear_skb: + return ret; + } + +-static u32 +-qca8k_port_to_phy(int port) +-{ +- /* From Andrew Lunn: +- * Port 0 has no internal phy. +- * Port 1 has an internal PHY at MDIO address 0. +- * Port 2 has an internal PHY at MDIO address 1. +- * ... +- * Port 5 has an internal PHY at MDIO address 4. +- * Port 6 has no internal PHY. +- */ +- +- return port - 1; +-} +- + static int + qca8k_mdio_busy_wait(struct mii_bus *bus, u32 reg, u32 mask) + { +--- a/drivers/net/dsa/qca/qca8k.h ++++ b/drivers/net/dsa/qca/qca8k.h +@@ -422,6 +422,20 @@ struct qca8k_fdb { + u8 mac[6]; + }; + ++static inline u32 qca8k_port_to_phy(int port) ++{ ++ /* From Andrew Lunn: ++ * Port 0 has no internal phy. ++ * Port 1 has an internal PHY at MDIO address 0. ++ * Port 2 has an internal PHY at MDIO address 1. ++ * ... ++ * Port 5 has an internal PHY at MDIO address 4. ++ * Port 6 has no internal PHY. ++ */ ++ ++ return port - 1; ++} ++ + /* Common setup function */ + extern const struct qca8k_mib_desc ar8327_mib[]; + extern const struct regmap_access_table qca8k_readable_table; diff --git a/target/linux/generic/backport-6.1/801-v6.4-02-net-dsa-qca8k-add-LEDs-basic-support.patch b/target/linux/generic/backport-6.1/801-v6.4-02-net-dsa-qca8k-add-LEDs-basic-support.patch new file mode 100644 index 0000000000..37922580da --- /dev/null +++ b/target/linux/generic/backport-6.1/801-v6.4-02-net-dsa-qca8k-add-LEDs-basic-support.patch @@ -0,0 +1,435 @@ +From 1e264f9d2918b5737023c44a23ae04def1095210 Mon Sep 17 00:00:00 2001 +From: Christian Marangi +Date: Mon, 17 Apr 2023 17:17:24 +0200 +Subject: [PATCH 2/9] net: dsa: qca8k: add LEDs basic support + +Add LEDs basic support for qca8k Switch Family by adding basic +brightness_set() support. + +Since these LEDs refelect port status, the default label is set to +":port". DT binding should describe the color and function of the +LEDs using standard LEDs api. +Each LED always have the device name as prefix. The device name is +composed from the mii bus id and the PHY addr resulting in example +names like: +- qca8k-0.0:00:amber:lan +- qca8k-0.0:00:white:lan +- qca8k-0.0:01:amber:lan +- qca8k-0.0:01:white:lan + +These LEDs supports only blocking variant of the brightness_set() +function since they can sleep during access of the switch leds to set +the brightness. + +While at it add to the qca8k header file each mode defined by the Switch +Documentation for future use. + +Signed-off-by: Christian Marangi +Reviewed-by: Florian Fainelli +Signed-off-by: David S. Miller +--- + drivers/net/dsa/qca/Kconfig | 8 ++ + drivers/net/dsa/qca/Makefile | 3 + + drivers/net/dsa/qca/qca8k-8xxx.c | 5 + + drivers/net/dsa/qca/qca8k-leds.c | 239 +++++++++++++++++++++++++++++++ + drivers/net/dsa/qca/qca8k.h | 60 ++++++++ + drivers/net/dsa/qca/qca8k_leds.h | 16 +++ + 6 files changed, 331 insertions(+) + create mode 100644 drivers/net/dsa/qca/qca8k-leds.c + create mode 100644 drivers/net/dsa/qca/qca8k_leds.h + +--- a/drivers/net/dsa/qca/Kconfig ++++ b/drivers/net/dsa/qca/Kconfig +@@ -15,3 +15,11 @@ config NET_DSA_QCA8K + help + This enables support for the Qualcomm Atheros QCA8K Ethernet + switch chips. ++ ++config NET_DSA_QCA8K_LEDS_SUPPORT ++ bool "Qualcomm Atheros QCA8K Ethernet switch family LEDs support" ++ depends on NET_DSA_QCA8K ++ depends on LEDS_CLASS ++ help ++ This enabled support for LEDs present on the Qualcomm Atheros ++ QCA8K Ethernet switch chips. +--- a/drivers/net/dsa/qca/Makefile ++++ b/drivers/net/dsa/qca/Makefile +@@ -2,3 +2,6 @@ + obj-$(CONFIG_NET_DSA_AR9331) += ar9331.o + obj-$(CONFIG_NET_DSA_QCA8K) += qca8k.o + qca8k-y += qca8k-common.o qca8k-8xxx.o ++ifdef CONFIG_NET_DSA_QCA8K_LEDS_SUPPORT ++qca8k-y += qca8k-leds.o ++endif +--- a/drivers/net/dsa/qca/qca8k-8xxx.c ++++ b/drivers/net/dsa/qca/qca8k-8xxx.c +@@ -22,6 +22,7 @@ + #include + + #include "qca8k.h" ++#include "qca8k_leds.h" + + static void + qca8k_split_addr(u32 regaddr, u16 *r1, u16 *r2, u16 *page) +@@ -1726,6 +1727,10 @@ qca8k_setup(struct dsa_switch *ds) + if (ret) + return ret; + ++ ret = qca8k_setup_led_ctrl(priv); ++ if (ret) ++ return ret; ++ + qca8k_setup_pcs(priv, &priv->pcs_port_0, 0); + qca8k_setup_pcs(priv, &priv->pcs_port_6, 6); + +--- /dev/null ++++ b/drivers/net/dsa/qca/qca8k-leds.c +@@ -0,0 +1,239 @@ ++// SPDX-License-Identifier: GPL-2.0 ++#include ++#include ++ ++#include "qca8k.h" ++#include "qca8k_leds.h" ++ ++static int ++qca8k_get_enable_led_reg(int port_num, int led_num, struct qca8k_led_pattern_en *reg_info) ++{ ++ switch (port_num) { ++ case 0: ++ reg_info->reg = QCA8K_LED_CTRL_REG(led_num); ++ reg_info->shift = QCA8K_LED_PHY0123_CONTROL_RULE_SHIFT; ++ break; ++ case 1: ++ case 2: ++ case 3: ++ /* Port 123 are controlled on a different reg */ ++ reg_info->reg = QCA8K_LED_CTRL3_REG; ++ reg_info->shift = QCA8K_LED_PHY123_PATTERN_EN_SHIFT(port_num, led_num); ++ break; ++ case 4: ++ reg_info->reg = QCA8K_LED_CTRL_REG(led_num); ++ reg_info->shift = QCA8K_LED_PHY4_CONTROL_RULE_SHIFT; ++ break; ++ default: ++ return -EINVAL; ++ } ++ ++ return 0; ++} ++ ++static int ++qca8k_led_brightness_set(struct qca8k_led *led, ++ enum led_brightness brightness) ++{ ++ struct qca8k_led_pattern_en reg_info; ++ struct qca8k_priv *priv = led->priv; ++ u32 mask, val; ++ ++ qca8k_get_enable_led_reg(led->port_num, led->led_num, ®_info); ++ ++ val = QCA8K_LED_ALWAYS_OFF; ++ if (brightness) ++ val = QCA8K_LED_ALWAYS_ON; ++ ++ /* HW regs to control brightness is special and port 1-2-3 ++ * are placed in a different reg. ++ * ++ * To control port 0 brightness: ++ * - the 2 bit (15, 14) of: ++ * - QCA8K_LED_CTRL0_REG for led1 ++ * - QCA8K_LED_CTRL1_REG for led2 ++ * - QCA8K_LED_CTRL2_REG for led3 ++ * ++ * To control port 4: ++ * - the 2 bit (31, 30) of: ++ * - QCA8K_LED_CTRL0_REG for led1 ++ * - QCA8K_LED_CTRL1_REG for led2 ++ * - QCA8K_LED_CTRL2_REG for led3 ++ * ++ * To control port 1: ++ * - the 2 bit at (9, 8) of QCA8K_LED_CTRL3_REG are used for led1 ++ * - the 2 bit at (11, 10) of QCA8K_LED_CTRL3_REG are used for led2 ++ * - the 2 bit at (13, 12) of QCA8K_LED_CTRL3_REG are used for led3 ++ * ++ * To control port 2: ++ * - the 2 bit at (15, 14) of QCA8K_LED_CTRL3_REG are used for led1 ++ * - the 2 bit at (17, 16) of QCA8K_LED_CTRL3_REG are used for led2 ++ * - the 2 bit at (19, 18) of QCA8K_LED_CTRL3_REG are used for led3 ++ * ++ * To control port 3: ++ * - the 2 bit at (21, 20) of QCA8K_LED_CTRL3_REG are used for led1 ++ * - the 2 bit at (23, 22) of QCA8K_LED_CTRL3_REG are used for led2 ++ * - the 2 bit at (25, 24) of QCA8K_LED_CTRL3_REG are used for led3 ++ * ++ * To abstract this and have less code, we use the port and led numm ++ * to calculate the shift and the correct reg due to this problem of ++ * not having a 1:1 map of LED with the regs. ++ */ ++ if (led->port_num == 0 || led->port_num == 4) { ++ mask = QCA8K_LED_PATTERN_EN_MASK; ++ val <<= QCA8K_LED_PATTERN_EN_SHIFT; ++ } else { ++ mask = QCA8K_LED_PHY123_PATTERN_EN_MASK; ++ } ++ ++ return regmap_update_bits(priv->regmap, reg_info.reg, ++ mask << reg_info.shift, ++ val << reg_info.shift); ++} ++ ++static int ++qca8k_cled_brightness_set_blocking(struct led_classdev *ldev, ++ enum led_brightness brightness) ++{ ++ struct qca8k_led *led = container_of(ldev, struct qca8k_led, cdev); ++ ++ return qca8k_led_brightness_set(led, brightness); ++} ++ ++static enum led_brightness ++qca8k_led_brightness_get(struct qca8k_led *led) ++{ ++ struct qca8k_led_pattern_en reg_info; ++ struct qca8k_priv *priv = led->priv; ++ u32 val; ++ int ret; ++ ++ qca8k_get_enable_led_reg(led->port_num, led->led_num, ®_info); ++ ++ ret = regmap_read(priv->regmap, reg_info.reg, &val); ++ if (ret) ++ return 0; ++ ++ val >>= reg_info.shift; ++ ++ if (led->port_num == 0 || led->port_num == 4) { ++ val &= QCA8K_LED_PATTERN_EN_MASK; ++ val >>= QCA8K_LED_PATTERN_EN_SHIFT; ++ } else { ++ val &= QCA8K_LED_PHY123_PATTERN_EN_MASK; ++ } ++ ++ /* Assume brightness ON only when the LED is set to always ON */ ++ return val == QCA8K_LED_ALWAYS_ON; ++} ++ ++static int ++qca8k_parse_port_leds(struct qca8k_priv *priv, struct fwnode_handle *port, int port_num) ++{ ++ struct fwnode_handle *led = NULL, *leds = NULL; ++ struct led_init_data init_data = { }; ++ struct dsa_switch *ds = priv->ds; ++ enum led_default_state state; ++ struct qca8k_led *port_led; ++ int led_num, led_index; ++ int ret; ++ ++ leds = fwnode_get_named_child_node(port, "leds"); ++ if (!leds) { ++ dev_dbg(priv->dev, "No Leds node specified in device tree for port %d!\n", ++ port_num); ++ return 0; ++ } ++ ++ fwnode_for_each_child_node(leds, led) { ++ /* Reg represent the led number of the port. ++ * Each port can have at most 3 leds attached ++ * Commonly: ++ * 1. is gigabit led ++ * 2. is mbit led ++ * 3. additional status led ++ */ ++ if (fwnode_property_read_u32(led, "reg", &led_num)) ++ continue; ++ ++ if (led_num >= QCA8K_LED_PORT_COUNT) { ++ dev_warn(priv->dev, "Invalid LED reg %d defined for port %d", ++ led_num, port_num); ++ continue; ++ } ++ ++ led_index = QCA8K_LED_PORT_INDEX(port_num, led_num); ++ ++ port_led = &priv->ports_led[led_index]; ++ port_led->port_num = port_num; ++ port_led->led_num = led_num; ++ port_led->priv = priv; ++ ++ state = led_init_default_state_get(led); ++ switch (state) { ++ case LEDS_DEFSTATE_ON: ++ port_led->cdev.brightness = 1; ++ qca8k_led_brightness_set(port_led, 1); ++ break; ++ case LEDS_DEFSTATE_KEEP: ++ port_led->cdev.brightness = ++ qca8k_led_brightness_get(port_led); ++ break; ++ default: ++ port_led->cdev.brightness = 0; ++ qca8k_led_brightness_set(port_led, 0); ++ } ++ ++ port_led->cdev.max_brightness = 1; ++ port_led->cdev.brightness_set_blocking = qca8k_cled_brightness_set_blocking; ++ init_data.default_label = ":port"; ++ init_data.fwnode = led; ++ init_data.devname_mandatory = true; ++ init_data.devicename = kasprintf(GFP_KERNEL, "%s:0%d", ds->slave_mii_bus->id, ++ port_num); ++ if (!init_data.devicename) ++ return -ENOMEM; ++ ++ ret = devm_led_classdev_register_ext(priv->dev, &port_led->cdev, &init_data); ++ if (ret) ++ dev_warn(priv->dev, "Failed to init LED %d for port %d", led_num, port_num); ++ ++ kfree(init_data.devicename); ++ } ++ ++ return 0; ++} ++ ++int ++qca8k_setup_led_ctrl(struct qca8k_priv *priv) ++{ ++ struct fwnode_handle *ports, *port; ++ int port_num; ++ int ret; ++ ++ ports = device_get_named_child_node(priv->dev, "ports"); ++ if (!ports) { ++ dev_info(priv->dev, "No ports node specified in device tree!"); ++ return 0; ++ } ++ ++ fwnode_for_each_child_node(ports, port) { ++ if (fwnode_property_read_u32(port, "reg", &port_num)) ++ continue; ++ ++ /* Skip checking for CPU port 0 and CPU port 6 as not supported */ ++ if (port_num == 0 || port_num == 6) ++ continue; ++ ++ /* Each port can have at most 3 different leds attached. ++ * Switch port starts from 0 to 6, but port 0 and 6 are CPU ++ * port. The port index needs to be decreased by one to identify ++ * the correct port for LED setup. ++ */ ++ ret = qca8k_parse_port_leds(priv, port, qca8k_port_to_phy(port_num)); ++ if (ret) ++ return ret; ++ } ++ ++ return 0; ++} +--- a/drivers/net/dsa/qca/qca8k.h ++++ b/drivers/net/dsa/qca/qca8k.h +@@ -11,6 +11,7 @@ + #include + #include + #include ++#include + #include + + #define QCA8K_ETHERNET_MDIO_PRIORITY 7 +@@ -85,6 +86,51 @@ + #define QCA8K_MDIO_MASTER_DATA(x) FIELD_PREP(QCA8K_MDIO_MASTER_DATA_MASK, x) + #define QCA8K_MDIO_MASTER_MAX_PORTS 5 + #define QCA8K_MDIO_MASTER_MAX_REG 32 ++ ++/* LED control register */ ++#define QCA8K_LED_PORT_COUNT 3 ++#define QCA8K_LED_COUNT ((QCA8K_NUM_PORTS - QCA8K_NUM_CPU_PORTS) * QCA8K_LED_PORT_COUNT) ++#define QCA8K_LED_RULE_COUNT 6 ++#define QCA8K_LED_RULE_MAX 11 ++#define QCA8K_LED_PORT_INDEX(_phy, _led) (((_phy) * QCA8K_LED_PORT_COUNT) + (_led)) ++ ++#define QCA8K_LED_PHY123_PATTERN_EN_SHIFT(_phy, _led) ((((_phy) - 1) * 6) + 8 + (2 * (_led))) ++#define QCA8K_LED_PHY123_PATTERN_EN_MASK GENMASK(1, 0) ++ ++#define QCA8K_LED_PHY0123_CONTROL_RULE_SHIFT 0 ++#define QCA8K_LED_PHY4_CONTROL_RULE_SHIFT 16 ++ ++#define QCA8K_LED_CTRL_REG(_i) (0x050 + (_i) * 4) ++#define QCA8K_LED_CTRL0_REG 0x50 ++#define QCA8K_LED_CTRL1_REG 0x54 ++#define QCA8K_LED_CTRL2_REG 0x58 ++#define QCA8K_LED_CTRL3_REG 0x5C ++#define QCA8K_LED_CTRL_SHIFT(_i) (((_i) % 2) * 16) ++#define QCA8K_LED_CTRL_MASK GENMASK(15, 0) ++#define QCA8K_LED_RULE_MASK GENMASK(13, 0) ++#define QCA8K_LED_BLINK_FREQ_MASK GENMASK(1, 0) ++#define QCA8K_LED_BLINK_FREQ_SHITF 0 ++#define QCA8K_LED_BLINK_2HZ 0 ++#define QCA8K_LED_BLINK_4HZ 1 ++#define QCA8K_LED_BLINK_8HZ 2 ++#define QCA8K_LED_BLINK_AUTO 3 ++#define QCA8K_LED_LINKUP_OVER_MASK BIT(2) ++#define QCA8K_LED_TX_BLINK_MASK BIT(4) ++#define QCA8K_LED_RX_BLINK_MASK BIT(5) ++#define QCA8K_LED_COL_BLINK_MASK BIT(7) ++#define QCA8K_LED_LINK_10M_EN_MASK BIT(8) ++#define QCA8K_LED_LINK_100M_EN_MASK BIT(9) ++#define QCA8K_LED_LINK_1000M_EN_MASK BIT(10) ++#define QCA8K_LED_POWER_ON_LIGHT_MASK BIT(11) ++#define QCA8K_LED_HALF_DUPLEX_MASK BIT(12) ++#define QCA8K_LED_FULL_DUPLEX_MASK BIT(13) ++#define QCA8K_LED_PATTERN_EN_MASK GENMASK(15, 14) ++#define QCA8K_LED_PATTERN_EN_SHIFT 14 ++#define QCA8K_LED_ALWAYS_OFF 0 ++#define QCA8K_LED_ALWAYS_BLINK_4HZ 1 ++#define QCA8K_LED_ALWAYS_ON 2 ++#define QCA8K_LED_RULE_CONTROLLED 3 ++ + #define QCA8K_GOL_MAC_ADDR0 0x60 + #define QCA8K_GOL_MAC_ADDR1 0x64 + #define QCA8K_MAX_FRAME_SIZE 0x78 +@@ -383,6 +429,19 @@ struct qca8k_pcs { + int port; + }; + ++struct qca8k_led_pattern_en { ++ u32 reg; ++ u8 shift; ++}; ++ ++struct qca8k_led { ++ u8 port_num; ++ u8 led_num; ++ u16 old_rule; ++ struct qca8k_priv *priv; ++ struct led_classdev cdev; ++}; ++ + struct qca8k_priv { + u8 switch_id; + u8 switch_revision; +@@ -407,6 +466,7 @@ struct qca8k_priv { + struct qca8k_pcs pcs_port_0; + struct qca8k_pcs pcs_port_6; + const struct qca8k_match_data *info; ++ struct qca8k_led ports_led[QCA8K_LED_COUNT]; + }; + + struct qca8k_mib_desc { +--- /dev/null ++++ b/drivers/net/dsa/qca/qca8k_leds.h +@@ -0,0 +1,16 @@ ++/* SPDX-License-Identifier: GPL-2.0-only */ ++ ++#ifndef __QCA8K_LEDS_H ++#define __QCA8K_LEDS_H ++ ++/* Leds Support function */ ++#ifdef CONFIG_NET_DSA_QCA8K_LEDS_SUPPORT ++int qca8k_setup_led_ctrl(struct qca8k_priv *priv); ++#else ++static inline int qca8k_setup_led_ctrl(struct qca8k_priv *priv) ++{ ++ return 0; ++} ++#endif ++ ++#endif /* __QCA8K_LEDS_H */ diff --git a/target/linux/generic/backport-6.1/801-v6.4-03-net-dsa-qca8k-add-LEDs-blink_set-support.patch b/target/linux/generic/backport-6.1/801-v6.4-03-net-dsa-qca8k-add-LEDs-blink_set-support.patch new file mode 100644 index 0000000000..231c4156df --- /dev/null +++ b/target/linux/generic/backport-6.1/801-v6.4-03-net-dsa-qca8k-add-LEDs-blink_set-support.patch @@ -0,0 +1,74 @@ +From 91acadcc6e599dfc62717abcdad58a459cfb1684 Mon Sep 17 00:00:00 2001 +From: Christian Marangi +Date: Mon, 17 Apr 2023 17:17:25 +0200 +Subject: [PATCH 3/9] net: dsa: qca8k: add LEDs blink_set() support + +Add LEDs blink_set() support to qca8k Switch Family. +These LEDs support hw accellerated blinking at a fixed rate +of 4Hz. + +Reject any other value since not supported by the LEDs switch. + +Signed-off-by: Christian Marangi +Reviewed-by: Andrew Lunn +Acked-by: Pavel Machek +Reviewed-by: Florian Fainelli +Signed-off-by: David S. Miller +--- + drivers/net/dsa/qca/qca8k-leds.c | 38 ++++++++++++++++++++++++++++++++ + 1 file changed, 38 insertions(+) + +--- a/drivers/net/dsa/qca/qca8k-leds.c ++++ b/drivers/net/dsa/qca/qca8k-leds.c +@@ -128,6 +128,43 @@ qca8k_led_brightness_get(struct qca8k_le + } + + static int ++qca8k_cled_blink_set(struct led_classdev *ldev, ++ unsigned long *delay_on, ++ unsigned long *delay_off) ++{ ++ struct qca8k_led *led = container_of(ldev, struct qca8k_led, cdev); ++ u32 mask, val = QCA8K_LED_ALWAYS_BLINK_4HZ; ++ struct qca8k_led_pattern_en reg_info; ++ struct qca8k_priv *priv = led->priv; ++ ++ if (*delay_on == 0 && *delay_off == 0) { ++ *delay_on = 125; ++ *delay_off = 125; ++ } ++ ++ if (*delay_on != 125 || *delay_off != 125) { ++ /* The hardware only supports blinking at 4Hz. Fall back ++ * to software implementation in other cases. ++ */ ++ return -EINVAL; ++ } ++ ++ qca8k_get_enable_led_reg(led->port_num, led->led_num, ®_info); ++ ++ if (led->port_num == 0 || led->port_num == 4) { ++ mask = QCA8K_LED_PATTERN_EN_MASK; ++ val <<= QCA8K_LED_PATTERN_EN_SHIFT; ++ } else { ++ mask = QCA8K_LED_PHY123_PATTERN_EN_MASK; ++ } ++ ++ regmap_update_bits(priv->regmap, reg_info.reg, mask << reg_info.shift, ++ val << reg_info.shift); ++ ++ return 0; ++} ++ ++static int + qca8k_parse_port_leds(struct qca8k_priv *priv, struct fwnode_handle *port, int port_num) + { + struct fwnode_handle *led = NULL, *leds = NULL; +@@ -186,6 +223,7 @@ qca8k_parse_port_leds(struct qca8k_priv + + port_led->cdev.max_brightness = 1; + port_led->cdev.brightness_set_blocking = qca8k_cled_brightness_set_blocking; ++ port_led->cdev.blink_set = qca8k_cled_blink_set; + init_data.default_label = ":port"; + init_data.fwnode = led; + init_data.devname_mandatory = true; diff --git a/target/linux/generic/backport-6.1/801-v6.4-04-leds-Provide-stubs-for-when-CLASS_LED-NEW_LEDS-are-d.patch b/target/linux/generic/backport-6.1/801-v6.4-04-leds-Provide-stubs-for-when-CLASS_LED-NEW_LEDS-are-d.patch new file mode 100644 index 0000000000..bc905b4468 --- /dev/null +++ b/target/linux/generic/backport-6.1/801-v6.4-04-leds-Provide-stubs-for-when-CLASS_LED-NEW_LEDS-are-d.patch @@ -0,0 +1,59 @@ +From e5029edd53937a29801ef507cee12e657ff31ea9 Mon Sep 17 00:00:00 2001 +From: Andrew Lunn +Date: Mon, 17 Apr 2023 17:17:26 +0200 +Subject: [PATCH 4/9] leds: Provide stubs for when CLASS_LED & NEW_LEDS are + disabled + +Provide stubs for devm_led_classdev_register_ext() and +led_init_default_state_get() so that LED drivers embedded within other +drivers such as PHYs and Ethernet switches still build when LEDS_CLASS +or NEW_LEDS are disabled. This also helps with Kconfig dependencies, +which are somewhat hairy for phylib and mdio and only get worse when +adding a dependency on LED_CLASS. + +Signed-off-by: Andrew Lunn +Signed-off-by: Christian Marangi +Reviewed-by: Florian Fainelli +Signed-off-by: David S. Miller +--- + include/linux/leds.h | 18 ++++++++++++++++++ + 1 file changed, 18 insertions(+) + +--- a/include/linux/leds.h ++++ b/include/linux/leds.h +@@ -63,7 +63,15 @@ struct led_init_data { + bool devname_mandatory; + }; + ++#if IS_ENABLED(CONFIG_NEW_LEDS) + enum led_default_state led_init_default_state_get(struct fwnode_handle *fwnode); ++#else ++static inline enum led_default_state ++led_init_default_state_get(struct fwnode_handle *fwnode) ++{ ++ return LEDS_DEFSTATE_OFF; ++} ++#endif + + struct led_hw_trigger_type { + int dummy; +@@ -198,9 +206,19 @@ static inline int led_classdev_register( + return led_classdev_register_ext(parent, led_cdev, NULL); + } + ++#if IS_ENABLED(CONFIG_LEDS_CLASS) + int devm_led_classdev_register_ext(struct device *parent, + struct led_classdev *led_cdev, + struct led_init_data *init_data); ++#else ++static inline int ++devm_led_classdev_register_ext(struct device *parent, ++ struct led_classdev *led_cdev, ++ struct led_init_data *init_data) ++{ ++ return 0; ++} ++#endif + + static inline int devm_led_classdev_register(struct device *parent, + struct led_classdev *led_cdev) diff --git a/target/linux/generic/backport-6.1/801-v6.4-05-net-phy-Add-a-binding-for-PHY-LEDs.patch b/target/linux/generic/backport-6.1/801-v6.4-05-net-phy-Add-a-binding-for-PHY-LEDs.patch new file mode 100644 index 0000000000..8df0ed1f7f --- /dev/null +++ b/target/linux/generic/backport-6.1/801-v6.4-05-net-phy-Add-a-binding-for-PHY-LEDs.patch @@ -0,0 +1,191 @@ +From 01e5b728e9e43ae444e0369695a5f72209906464 Mon Sep 17 00:00:00 2001 +From: Andrew Lunn +Date: Mon, 17 Apr 2023 17:17:27 +0200 +Subject: [PATCH 5/9] net: phy: Add a binding for PHY LEDs + +Define common binding parsing for all PHY drivers with LEDs using +phylib. Parse the DT as part of the phy_probe and add LEDs to the +linux LED class infrastructure. For the moment, provide a dummy +brightness function, which will later be replaced with a call into the +PHY driver. This allows testing since the LED core might otherwise +reject an LED whose brightness cannot be set. + +Add a dependency on LED_CLASS. It either needs to be built in, or not +enabled, since a modular build can result in linker errors. + +Signed-off-by: Andrew Lunn +Signed-off-by: Christian Marangi +Reviewed-by: Florian Fainelli +Signed-off-by: David S. Miller +--- + drivers/net/phy/Kconfig | 1 + + drivers/net/phy/phy_device.c | 76 ++++++++++++++++++++++++++++++++++++ + include/linux/phy.h | 16 ++++++++ + 3 files changed, 93 insertions(+) + +--- a/drivers/net/phy/Kconfig ++++ b/drivers/net/phy/Kconfig +@@ -18,6 +18,7 @@ menuconfig PHYLIB + depends on NETDEVICES + select MDIO_DEVICE + select MDIO_DEVRES ++ depends on LEDS_CLASS || LEDS_CLASS=n + help + Ethernet controllers are usually attached to PHY + devices. This option provides infrastructure for +--- a/drivers/net/phy/phy_device.c ++++ b/drivers/net/phy/phy_device.c +@@ -19,10 +19,12 @@ + #include + #include + #include ++#include + #include + #include + #include + #include ++#include + #include + #include + #include +@@ -644,6 +646,7 @@ struct phy_device *phy_device_create(str + device_initialize(&mdiodev->dev); + + dev->state = PHY_DOWN; ++ INIT_LIST_HEAD(&dev->leds); + + mutex_init(&dev->lock); + INIT_DELAYED_WORK(&dev->state_queue, phy_state_machine); +@@ -2931,6 +2934,74 @@ static bool phy_drv_supports_irq(struct + return phydrv->config_intr && phydrv->handle_interrupt; + } + ++/* Dummy implementation until calls into PHY driver are added */ ++static int phy_led_set_brightness(struct led_classdev *led_cdev, ++ enum led_brightness value) ++{ ++ return 0; ++} ++ ++static int of_phy_led(struct phy_device *phydev, ++ struct device_node *led) ++{ ++ struct device *dev = &phydev->mdio.dev; ++ struct led_init_data init_data = {}; ++ struct led_classdev *cdev; ++ struct phy_led *phyled; ++ int err; ++ ++ phyled = devm_kzalloc(dev, sizeof(*phyled), GFP_KERNEL); ++ if (!phyled) ++ return -ENOMEM; ++ ++ cdev = &phyled->led_cdev; ++ ++ err = of_property_read_u8(led, "reg", &phyled->index); ++ if (err) ++ return err; ++ ++ cdev->brightness_set_blocking = phy_led_set_brightness; ++ cdev->max_brightness = 1; ++ init_data.devicename = dev_name(&phydev->mdio.dev); ++ init_data.fwnode = of_fwnode_handle(led); ++ init_data.devname_mandatory = true; ++ ++ err = devm_led_classdev_register_ext(dev, cdev, &init_data); ++ if (err) ++ return err; ++ ++ list_add(&phyled->list, &phydev->leds); ++ ++ return 0; ++} ++ ++static int of_phy_leds(struct phy_device *phydev) ++{ ++ struct device_node *node = phydev->mdio.dev.of_node; ++ struct device_node *leds, *led; ++ int err; ++ ++ if (!IS_ENABLED(CONFIG_OF_MDIO)) ++ return 0; ++ ++ if (!node) ++ return 0; ++ ++ leds = of_get_child_by_name(node, "leds"); ++ if (!leds) ++ return 0; ++ ++ for_each_available_child_of_node(leds, led) { ++ err = of_phy_led(phydev, led); ++ if (err) { ++ of_node_put(led); ++ return err; ++ } ++ } ++ ++ return 0; ++} ++ + /** + * fwnode_mdio_find_device - Given a fwnode, find the mdio_device + * @fwnode: pointer to the mdio_device's fwnode +@@ -3107,6 +3178,11 @@ static int phy_probe(struct device *dev) + /* Set the state to READY by default */ + phydev->state = PHY_READY; + ++ /* Get the LEDs from the device tree, and instantiate standard ++ * LEDs for them. ++ */ ++ err = of_phy_leds(phydev); ++ + out: + /* Re-assert the reset signal on error */ + if (err) +--- a/include/linux/phy.h ++++ b/include/linux/phy.h +@@ -14,6 +14,7 @@ + #include + #include + #include ++#include + #include + #include + #include +@@ -593,6 +594,7 @@ struct macsec_ops; + * @phy_num_led_triggers: Number of triggers in @phy_led_triggers + * @led_link_trigger: LED trigger for link up/down + * @last_triggered: last LED trigger for link speed ++ * @leds: list of PHY LED structures + * @master_slave_set: User requested master/slave configuration + * @master_slave_get: Current master/slave advertisement + * @master_slave_state: Current master/slave configuration +@@ -685,6 +687,7 @@ struct phy_device { + + struct phy_led_trigger *led_link_trigger; + #endif ++ struct list_head leds; + + /* + * Interrupt number for this PHY +@@ -759,6 +762,19 @@ struct phy_tdr_config { + #define PHY_PAIR_ALL -1 + + /** ++ * struct phy_led: An LED driven by the PHY ++ * ++ * @list: List of LEDs ++ * @led_cdev: Standard LED class structure ++ * @index: Number of the LED ++ */ ++struct phy_led { ++ struct list_head list; ++ struct led_classdev led_cdev; ++ u8 index; ++}; ++ ++/** + * struct phy_driver - Driver structure for a particular PHY type + * + * @mdiodrv: Data common to all MDIO devices diff --git a/target/linux/generic/backport-6.1/801-v6.4-06-net-phy-phy_device-Call-into-the-PHY-driver-to-set-L.patch b/target/linux/generic/backport-6.1/801-v6.4-06-net-phy-phy_device-Call-into-the-PHY-driver-to-set-L.patch new file mode 100644 index 0000000000..57db12ed4a --- /dev/null +++ b/target/linux/generic/backport-6.1/801-v6.4-06-net-phy-phy_device-Call-into-the-PHY-driver-to-set-L.patch @@ -0,0 +1,97 @@ +From 684818189b04b095b34964ed4a3ea5249a840eab Mon Sep 17 00:00:00 2001 +From: Andrew Lunn +Date: Mon, 17 Apr 2023 17:17:28 +0200 +Subject: [PATCH 6/9] net: phy: phy_device: Call into the PHY driver to set LED + brightness + +Linux LEDs can be software controlled via the brightness file in /sys. +LED drivers need to implement a brightness_set function which the core +will call. Implement an intermediary in phy_device, which will call +into the phy driver if it implements the necessary function. + +Signed-off-by: Andrew Lunn +Signed-off-by: Christian Marangi +Reviewed-by: Florian Fainelli +Signed-off-by: David S. Miller +--- + drivers/net/phy/phy_device.c | 15 ++++++++++++--- + include/linux/phy.h | 13 +++++++++++++ + 2 files changed, 25 insertions(+), 3 deletions(-) + +--- a/drivers/net/phy/phy_device.c ++++ b/drivers/net/phy/phy_device.c +@@ -2934,11 +2934,18 @@ static bool phy_drv_supports_irq(struct + return phydrv->config_intr && phydrv->handle_interrupt; + } + +-/* Dummy implementation until calls into PHY driver are added */ + static int phy_led_set_brightness(struct led_classdev *led_cdev, + enum led_brightness value) + { +- return 0; ++ struct phy_led *phyled = to_phy_led(led_cdev); ++ struct phy_device *phydev = phyled->phydev; ++ int err; ++ ++ mutex_lock(&phydev->lock); ++ err = phydev->drv->led_brightness_set(phydev, phyled->index, value); ++ mutex_unlock(&phydev->lock); ++ ++ return err; + } + + static int of_phy_led(struct phy_device *phydev, +@@ -2955,12 +2962,14 @@ static int of_phy_led(struct phy_device + return -ENOMEM; + + cdev = &phyled->led_cdev; ++ phyled->phydev = phydev; + + err = of_property_read_u8(led, "reg", &phyled->index); + if (err) + return err; + +- cdev->brightness_set_blocking = phy_led_set_brightness; ++ if (phydev->drv->led_brightness_set) ++ cdev->brightness_set_blocking = phy_led_set_brightness; + cdev->max_brightness = 1; + init_data.devicename = dev_name(&phydev->mdio.dev); + init_data.fwnode = of_fwnode_handle(led); +--- a/include/linux/phy.h ++++ b/include/linux/phy.h +@@ -765,15 +765,19 @@ struct phy_tdr_config { + * struct phy_led: An LED driven by the PHY + * + * @list: List of LEDs ++ * @phydev: PHY this LED is attached to + * @led_cdev: Standard LED class structure + * @index: Number of the LED + */ + struct phy_led { + struct list_head list; ++ struct phy_device *phydev; + struct led_classdev led_cdev; + u8 index; + }; + ++#define to_phy_led(d) container_of(d, struct phy_led, led_cdev) ++ + /** + * struct phy_driver - Driver structure for a particular PHY type + * +@@ -988,6 +992,15 @@ struct phy_driver { + int (*get_sqi)(struct phy_device *dev); + /** @get_sqi_max: Get the maximum signal quality indication */ + int (*get_sqi_max)(struct phy_device *dev); ++ ++ /** ++ * @led_brightness_set: Set a PHY LED brightness. Index ++ * indicates which of the PHYs led should be set. Value ++ * follows the standard LED class meaning, e.g. LED_OFF, ++ * LED_HALF, LED_FULL. ++ */ ++ int (*led_brightness_set)(struct phy_device *dev, ++ u8 index, enum led_brightness value); + }; + #define to_phy_driver(d) container_of(to_mdio_common_driver(d), \ + struct phy_driver, mdiodrv) diff --git a/target/linux/generic/backport-6.1/801-v6.4-07-net-phy-marvell-Add-software-control-of-the-LEDs.patch b/target/linux/generic/backport-6.1/801-v6.4-07-net-phy-marvell-Add-software-control-of-the-LEDs.patch new file mode 100644 index 0000000000..5114c0e6da --- /dev/null +++ b/target/linux/generic/backport-6.1/801-v6.4-07-net-phy-marvell-Add-software-control-of-the-LEDs.patch @@ -0,0 +1,112 @@ +From 2d3960e58ef7c83fe1dbf952f056b9e906cb6df8 Mon Sep 17 00:00:00 2001 +From: Andrew Lunn +Date: Mon, 17 Apr 2023 17:17:29 +0200 +Subject: [PATCH 7/9] net: phy: marvell: Add software control of the LEDs + +Add a brightness function, so the LEDs can be controlled from +software using the standard Linux LED infrastructure. + +Signed-off-by: Andrew Lunn +Signed-off-by: Christian Marangi +Reviewed-by: Florian Fainelli +Signed-off-by: David S. Miller +--- + drivers/net/phy/marvell.c | 45 ++++++++++++++++++++++++++++++++++----- + 1 file changed, 40 insertions(+), 5 deletions(-) + +--- a/drivers/net/phy/marvell.c ++++ b/drivers/net/phy/marvell.c +@@ -144,11 +144,13 @@ + /* WOL Event Interrupt Enable */ + #define MII_88E1318S_PHY_CSIER_WOL_EIE BIT(7) + +-/* LED Timer Control Register */ +-#define MII_88E1318S_PHY_LED_TCR 0x12 +-#define MII_88E1318S_PHY_LED_TCR_FORCE_INT BIT(15) +-#define MII_88E1318S_PHY_LED_TCR_INTn_ENABLE BIT(7) +-#define MII_88E1318S_PHY_LED_TCR_INT_ACTIVE_LOW BIT(11) ++#define MII_88E1318S_PHY_LED_FUNC 0x10 ++#define MII_88E1318S_PHY_LED_FUNC_OFF (0x8) ++#define MII_88E1318S_PHY_LED_FUNC_ON (0x9) ++#define MII_88E1318S_PHY_LED_TCR 0x12 ++#define MII_88E1318S_PHY_LED_TCR_FORCE_INT BIT(15) ++#define MII_88E1318S_PHY_LED_TCR_INTn_ENABLE BIT(7) ++#define MII_88E1318S_PHY_LED_TCR_INT_ACTIVE_LOW BIT(11) + + /* Magic Packet MAC address registers */ + #define MII_88E1318S_PHY_MAGIC_PACKET_WORD2 0x17 +@@ -2832,6 +2834,34 @@ static int marvell_hwmon_probe(struct ph + } + #endif + ++static int m88e1318_led_brightness_set(struct phy_device *phydev, ++ u8 index, enum led_brightness value) ++{ ++ int reg; ++ ++ reg = phy_read_paged(phydev, MII_MARVELL_LED_PAGE, ++ MII_88E1318S_PHY_LED_FUNC); ++ if (reg < 0) ++ return reg; ++ ++ switch (index) { ++ case 0: ++ case 1: ++ case 2: ++ reg &= ~(0xf << (4 * index)); ++ if (value == LED_OFF) ++ reg |= MII_88E1318S_PHY_LED_FUNC_OFF << (4 * index); ++ else ++ reg |= MII_88E1318S_PHY_LED_FUNC_ON << (4 * index); ++ break; ++ default: ++ return -EINVAL; ++ } ++ ++ return phy_write_paged(phydev, MII_MARVELL_LED_PAGE, ++ MII_88E1318S_PHY_LED_FUNC, reg); ++} ++ + static int marvell_probe(struct phy_device *phydev) + { + struct marvell_priv *priv; +@@ -3081,6 +3111,7 @@ static struct phy_driver marvell_drivers + .get_sset_count = marvell_get_sset_count, + .get_strings = marvell_get_strings, + .get_stats = marvell_get_stats, ++ .led_brightness_set = m88e1318_led_brightness_set, + }, + { + .phy_id = MARVELL_PHY_ID_88E1145, +@@ -3187,6 +3218,7 @@ static struct phy_driver marvell_drivers + .cable_test_start = marvell_vct7_cable_test_start, + .cable_test_tdr_start = marvell_vct5_cable_test_tdr_start, + .cable_test_get_status = marvell_vct7_cable_test_get_status, ++ .led_brightness_set = m88e1318_led_brightness_set, + }, + { + .phy_id = MARVELL_PHY_ID_88E1540, +@@ -3213,6 +3245,7 @@ static struct phy_driver marvell_drivers + .cable_test_start = marvell_vct7_cable_test_start, + .cable_test_tdr_start = marvell_vct5_cable_test_tdr_start, + .cable_test_get_status = marvell_vct7_cable_test_get_status, ++ .led_brightness_set = m88e1318_led_brightness_set, + }, + { + .phy_id = MARVELL_PHY_ID_88E1545, +@@ -3239,6 +3272,7 @@ static struct phy_driver marvell_drivers + .cable_test_start = marvell_vct7_cable_test_start, + .cable_test_tdr_start = marvell_vct5_cable_test_tdr_start, + .cable_test_get_status = marvell_vct7_cable_test_get_status, ++ .led_brightness_set = m88e1318_led_brightness_set, + }, + { + .phy_id = MARVELL_PHY_ID_88E3016, +@@ -3380,6 +3414,7 @@ static struct phy_driver marvell_drivers + .get_stats = marvell_get_stats, + .get_tunable = m88e1540_get_tunable, + .set_tunable = m88e1540_set_tunable, ++ .led_brightness_set = m88e1318_led_brightness_set, + }, + }; + diff --git a/target/linux/generic/backport-6.1/801-v6.4-08-net-phy-phy_device-Call-into-the-PHY-driver-to-set-L.patch b/target/linux/generic/backport-6.1/801-v6.4-08-net-phy-phy_device-Call-into-the-PHY-driver-to-set-L.patch new file mode 100644 index 0000000000..e868722afa --- /dev/null +++ b/target/linux/generic/backport-6.1/801-v6.4-08-net-phy-phy_device-Call-into-the-PHY-driver-to-set-L.patch @@ -0,0 +1,73 @@ +From 4e901018432e38eab35d2a352661ce4727795be1 Mon Sep 17 00:00:00 2001 +From: Andrew Lunn +Date: Mon, 17 Apr 2023 17:17:30 +0200 +Subject: [PATCH 8/9] net: phy: phy_device: Call into the PHY driver to set LED + blinking + +Linux LEDs can be requested to perform hardware accelerated +blinking. Pass this to the PHY driver, if it implements the op. + +Signed-off-by: Andrew Lunn +Signed-off-by: Christian Marangi +Reviewed-by: Florian Fainelli +Signed-off-by: David S. Miller +--- + drivers/net/phy/phy_device.c | 18 ++++++++++++++++++ + include/linux/phy.h | 12 ++++++++++++ + 2 files changed, 30 insertions(+) + +--- a/drivers/net/phy/phy_device.c ++++ b/drivers/net/phy/phy_device.c +@@ -2948,6 +2948,22 @@ static int phy_led_set_brightness(struct + return err; + } + ++static int phy_led_blink_set(struct led_classdev *led_cdev, ++ unsigned long *delay_on, ++ unsigned long *delay_off) ++{ ++ struct phy_led *phyled = to_phy_led(led_cdev); ++ struct phy_device *phydev = phyled->phydev; ++ int err; ++ ++ mutex_lock(&phydev->lock); ++ err = phydev->drv->led_blink_set(phydev, phyled->index, ++ delay_on, delay_off); ++ mutex_unlock(&phydev->lock); ++ ++ return err; ++} ++ + static int of_phy_led(struct phy_device *phydev, + struct device_node *led) + { +@@ -2970,6 +2986,8 @@ static int of_phy_led(struct phy_device + + if (phydev->drv->led_brightness_set) + cdev->brightness_set_blocking = phy_led_set_brightness; ++ if (phydev->drv->led_blink_set) ++ cdev->blink_set = phy_led_blink_set; + cdev->max_brightness = 1; + init_data.devicename = dev_name(&phydev->mdio.dev); + init_data.fwnode = of_fwnode_handle(led); +--- a/include/linux/phy.h ++++ b/include/linux/phy.h +@@ -1001,6 +1001,18 @@ struct phy_driver { + */ + int (*led_brightness_set)(struct phy_device *dev, + u8 index, enum led_brightness value); ++ ++ /** ++ * @led_blink_set: Set a PHY LED brightness. Index indicates ++ * which of the PHYs led should be configured to blink. Delays ++ * are in milliseconds and if both are zero then a sensible ++ * default should be chosen. The call should adjust the ++ * timings in that case and if it can't match the values ++ * specified exactly. ++ */ ++ int (*led_blink_set)(struct phy_device *dev, u8 index, ++ unsigned long *delay_on, ++ unsigned long *delay_off); + }; + #define to_phy_driver(d) container_of(to_mdio_common_driver(d), \ + struct phy_driver, mdiodrv) diff --git a/target/linux/generic/backport-6.1/801-v6.4-09-net-phy-marvell-Implement-led_blink_set.patch b/target/linux/generic/backport-6.1/801-v6.4-09-net-phy-marvell-Implement-led_blink_set.patch new file mode 100644 index 0000000000..8d5081a43c --- /dev/null +++ b/target/linux/generic/backport-6.1/801-v6.4-09-net-phy-marvell-Implement-led_blink_set.patch @@ -0,0 +1,104 @@ +From ea9e86485decb2ac1750005bd96c166c9b780406 Mon Sep 17 00:00:00 2001 +From: Andrew Lunn +Date: Mon, 17 Apr 2023 17:17:31 +0200 +Subject: [PATCH 9/9] net: phy: marvell: Implement led_blink_set() + +The Marvell PHY can blink the LEDs, simple on/off. All LEDs blink at +the same rate, and the reset default is 84ms per blink, which is +around 12Hz. + +Signed-off-by: Andrew Lunn +Signed-off-by: Christian Marangi +Reviewed-by: Florian Fainelli +Signed-off-by: David S. Miller +--- + drivers/net/phy/marvell.c | 36 ++++++++++++++++++++++++++++++++++++ + 1 file changed, 36 insertions(+) + +--- a/drivers/net/phy/marvell.c ++++ b/drivers/net/phy/marvell.c +@@ -147,6 +147,8 @@ + #define MII_88E1318S_PHY_LED_FUNC 0x10 + #define MII_88E1318S_PHY_LED_FUNC_OFF (0x8) + #define MII_88E1318S_PHY_LED_FUNC_ON (0x9) ++#define MII_88E1318S_PHY_LED_FUNC_HI_Z (0xa) ++#define MII_88E1318S_PHY_LED_FUNC_BLINK (0xb) + #define MII_88E1318S_PHY_LED_TCR 0x12 + #define MII_88E1318S_PHY_LED_TCR_FORCE_INT BIT(15) + #define MII_88E1318S_PHY_LED_TCR_INTn_ENABLE BIT(7) +@@ -2862,6 +2864,35 @@ static int m88e1318_led_brightness_set(s + MII_88E1318S_PHY_LED_FUNC, reg); + } + ++static int m88e1318_led_blink_set(struct phy_device *phydev, u8 index, ++ unsigned long *delay_on, ++ unsigned long *delay_off) ++{ ++ int reg; ++ ++ reg = phy_read_paged(phydev, MII_MARVELL_LED_PAGE, ++ MII_88E1318S_PHY_LED_FUNC); ++ if (reg < 0) ++ return reg; ++ ++ switch (index) { ++ case 0: ++ case 1: ++ case 2: ++ reg &= ~(0xf << (4 * index)); ++ reg |= MII_88E1318S_PHY_LED_FUNC_BLINK << (4 * index); ++ /* Reset default is 84ms */ ++ *delay_on = 84 / 2; ++ *delay_off = 84 / 2; ++ break; ++ default: ++ return -EINVAL; ++ } ++ ++ return phy_write_paged(phydev, MII_MARVELL_LED_PAGE, ++ MII_88E1318S_PHY_LED_FUNC, reg); ++} ++ + static int marvell_probe(struct phy_device *phydev) + { + struct marvell_priv *priv; +@@ -3112,6 +3143,7 @@ static struct phy_driver marvell_drivers + .get_strings = marvell_get_strings, + .get_stats = marvell_get_stats, + .led_brightness_set = m88e1318_led_brightness_set, ++ .led_blink_set = m88e1318_led_blink_set, + }, + { + .phy_id = MARVELL_PHY_ID_88E1145, +@@ -3219,6 +3251,7 @@ static struct phy_driver marvell_drivers + .cable_test_tdr_start = marvell_vct5_cable_test_tdr_start, + .cable_test_get_status = marvell_vct7_cable_test_get_status, + .led_brightness_set = m88e1318_led_brightness_set, ++ .led_blink_set = m88e1318_led_blink_set, + }, + { + .phy_id = MARVELL_PHY_ID_88E1540, +@@ -3246,6 +3279,7 @@ static struct phy_driver marvell_drivers + .cable_test_tdr_start = marvell_vct5_cable_test_tdr_start, + .cable_test_get_status = marvell_vct7_cable_test_get_status, + .led_brightness_set = m88e1318_led_brightness_set, ++ .led_blink_set = m88e1318_led_blink_set, + }, + { + .phy_id = MARVELL_PHY_ID_88E1545, +@@ -3273,6 +3307,7 @@ static struct phy_driver marvell_drivers + .cable_test_tdr_start = marvell_vct5_cable_test_tdr_start, + .cable_test_get_status = marvell_vct7_cable_test_get_status, + .led_brightness_set = m88e1318_led_brightness_set, ++ .led_blink_set = m88e1318_led_blink_set, + }, + { + .phy_id = MARVELL_PHY_ID_88E3016, +@@ -3415,6 +3450,7 @@ static struct phy_driver marvell_drivers + .get_tunable = m88e1540_get_tunable, + .set_tunable = m88e1540_set_tunable, + .led_brightness_set = m88e1318_led_brightness_set, ++ .led_blink_set = m88e1318_led_blink_set, + }, + }; + diff --git a/target/linux/generic/backport-6.1/802-v6.4-net-phy-marvell-Fix-inconsistent-indenting-in-led_bl.patch b/target/linux/generic/backport-6.1/802-v6.4-net-phy-marvell-Fix-inconsistent-indenting-in-led_bl.patch new file mode 100644 index 0000000000..56df3f095e --- /dev/null +++ b/target/linux/generic/backport-6.1/802-v6.4-net-phy-marvell-Fix-inconsistent-indenting-in-led_bl.patch @@ -0,0 +1,38 @@ +From 4774ad841bef97cc51df90195338c5b2573dd4cb Mon Sep 17 00:00:00 2001 +From: Christian Marangi +Date: Sun, 23 Apr 2023 19:28:00 +0200 +Subject: [PATCH] net: phy: marvell: Fix inconsistent indenting in + led_blink_set + +Fix inconsistent indeinting in m88e1318_led_blink_set reported by kernel +test robot, probably done by the presence of an if condition dropped in +later revision of the same code. + +Reported-by: kernel test robot +Link: https://lore.kernel.org/oe-kbuild-all/202304240007.0VEX8QYG-lkp@intel.com/ +Fixes: ea9e86485dec ("net: phy: marvell: Implement led_blink_set()") +Signed-off-by: Christian Marangi +Reviewed-by: Andrew Lunn +Link: https://lore.kernel.org/r/20230423172800.3470-1-ansuelsmth@gmail.com +Signed-off-by: Jakub Kicinski +--- + drivers/net/phy/marvell.c | 8 ++++---- + 1 file changed, 4 insertions(+), 4 deletions(-) + +--- a/drivers/net/phy/marvell.c ++++ b/drivers/net/phy/marvell.c +@@ -2880,10 +2880,10 @@ static int m88e1318_led_blink_set(struct + case 1: + case 2: + reg &= ~(0xf << (4 * index)); +- reg |= MII_88E1318S_PHY_LED_FUNC_BLINK << (4 * index); +- /* Reset default is 84ms */ +- *delay_on = 84 / 2; +- *delay_off = 84 / 2; ++ reg |= MII_88E1318S_PHY_LED_FUNC_BLINK << (4 * index); ++ /* Reset default is 84ms */ ++ *delay_on = 84 / 2; ++ *delay_off = 84 / 2; + break; + default: + return -EINVAL; diff --git a/target/linux/generic/backport-6.1/803-v6.5-01-leds-trigger-netdev-Recheck-NETDEV_LED_MODE_LINKUP-o.patch b/target/linux/generic/backport-6.1/803-v6.5-01-leds-trigger-netdev-Recheck-NETDEV_LED_MODE_LINKUP-o.patch new file mode 100644 index 0000000000..3385023168 --- /dev/null +++ b/target/linux/generic/backport-6.1/803-v6.5-01-leds-trigger-netdev-Recheck-NETDEV_LED_MODE_LINKUP-o.patch @@ -0,0 +1,35 @@ +From cee4bd16c3195a701be683f7da9e88c6e11acb73 Mon Sep 17 00:00:00 2001 +From: Christian Marangi +Date: Wed, 19 Apr 2023 23:07:39 +0200 +Subject: [PATCH 1/5] leds: trigger: netdev: Recheck NETDEV_LED_MODE_LINKUP on + dev rename + +Dev can be renamed also while up for supported device. We currently +wrongly clear the NETDEV_LED_MODE_LINKUP flag on NETDEV_CHANGENAME +event. + +Fix this by rechecking if the carrier is ok on NETDEV_CHANGENAME and +correctly set the NETDEV_LED_MODE_LINKUP bit. + +Fixes: 5f820ed52371 ("leds: trigger: netdev: fix handling on interface rename") +Cc: stable@vger.kernel.org # v5.5+ +Signed-off-by: Christian Marangi +Reviewed-by: Andrew Lunn +Signed-off-by: Lee Jones +Link: https://lore.kernel.org/r/20230419210743.3594-2-ansuelsmth@gmail.com +--- + drivers/leds/trigger/ledtrig-netdev.c | 3 +++ + 1 file changed, 3 insertions(+) + +--- a/drivers/leds/trigger/ledtrig-netdev.c ++++ b/drivers/leds/trigger/ledtrig-netdev.c +@@ -318,6 +318,9 @@ static int netdev_trig_notify(struct not + clear_bit(NETDEV_LED_MODE_LINKUP, &trigger_data->mode); + switch (evt) { + case NETDEV_CHANGENAME: ++ if (netif_carrier_ok(dev)) ++ set_bit(NETDEV_LED_MODE_LINKUP, &trigger_data->mode); ++ fallthrough; + case NETDEV_REGISTER: + if (trigger_data->net_dev) + dev_put(trigger_data->net_dev); diff --git a/target/linux/generic/backport-6.1/803-v6.5-02-leds-trigger-netdev-Drop-NETDEV_LED_MODE_LINKUP-from.patch b/target/linux/generic/backport-6.1/803-v6.5-02-leds-trigger-netdev-Drop-NETDEV_LED_MODE_LINKUP-from.patch new file mode 100644 index 0000000000..3170c26058 --- /dev/null +++ b/target/linux/generic/backport-6.1/803-v6.5-02-leds-trigger-netdev-Drop-NETDEV_LED_MODE_LINKUP-from.patch @@ -0,0 +1,87 @@ +From e2f24cb1b5daf9a4f6f3ba574c1fa74aab9807a4 Mon Sep 17 00:00:00 2001 +From: Christian Marangi +Date: Wed, 19 Apr 2023 23:07:40 +0200 +Subject: [PATCH 2/5] leds: trigger: netdev: Drop NETDEV_LED_MODE_LINKUP from + mode + +Putting NETDEV_LED_MODE_LINKUP in the same list of the netdev trigger +modes is wrong as it's used to set the link state of the device and not +to set a blink mode as it's done by NETDEV_LED_LINK, NETDEV_LED_TX and +NETDEV_LED_RX. It's also wrong to put this state in the same bitmap of the +netdev trigger mode and should be external to it. + +Drop NETDEV_LED_MODE_LINKUP from mode list and convert to a simple bool +that will be true or false based on the carrier link. No functional +change intended. + +Signed-off-by: Christian Marangi +Reviewed-by: Andrew Lunn +Signed-off-by: Lee Jones +Link: https://lore.kernel.org/r/20230419210743.3594-3-ansuelsmth@gmail.com +--- + drivers/leds/trigger/ledtrig-netdev.c | 19 ++++++++----------- + 1 file changed, 8 insertions(+), 11 deletions(-) + +--- a/drivers/leds/trigger/ledtrig-netdev.c ++++ b/drivers/leds/trigger/ledtrig-netdev.c +@@ -50,10 +50,10 @@ struct led_netdev_data { + unsigned int last_activity; + + unsigned long mode; ++ bool carrier_link_up; + #define NETDEV_LED_LINK 0 + #define NETDEV_LED_TX 1 + #define NETDEV_LED_RX 2 +-#define NETDEV_LED_MODE_LINKUP 3 + }; + + enum netdev_led_attr { +@@ -73,9 +73,9 @@ static void set_baseline_state(struct le + if (!led_cdev->blink_brightness) + led_cdev->blink_brightness = led_cdev->max_brightness; + +- if (!test_bit(NETDEV_LED_MODE_LINKUP, &trigger_data->mode)) ++ if (!trigger_data->carrier_link_up) { + led_set_brightness(led_cdev, LED_OFF); +- else { ++ } else { + if (test_bit(NETDEV_LED_LINK, &trigger_data->mode)) + led_set_brightness(led_cdev, + led_cdev->blink_brightness); +@@ -131,10 +131,9 @@ static ssize_t device_name_store(struct + trigger_data->net_dev = + dev_get_by_name(&init_net, trigger_data->device_name); + +- clear_bit(NETDEV_LED_MODE_LINKUP, &trigger_data->mode); ++ trigger_data->carrier_link_up = false; + if (trigger_data->net_dev != NULL) +- if (netif_carrier_ok(trigger_data->net_dev)) +- set_bit(NETDEV_LED_MODE_LINKUP, &trigger_data->mode); ++ trigger_data->carrier_link_up = netif_carrier_ok(trigger_data->net_dev); + + trigger_data->last_activity = 0; + +@@ -315,11 +314,10 @@ static int netdev_trig_notify(struct not + + spin_lock_bh(&trigger_data->lock); + +- clear_bit(NETDEV_LED_MODE_LINKUP, &trigger_data->mode); ++ trigger_data->carrier_link_up = false; + switch (evt) { + case NETDEV_CHANGENAME: +- if (netif_carrier_ok(dev)) +- set_bit(NETDEV_LED_MODE_LINKUP, &trigger_data->mode); ++ trigger_data->carrier_link_up = netif_carrier_ok(dev); + fallthrough; + case NETDEV_REGISTER: + if (trigger_data->net_dev) +@@ -333,8 +331,7 @@ static int netdev_trig_notify(struct not + break; + case NETDEV_UP: + case NETDEV_CHANGE: +- if (netif_carrier_ok(dev)) +- set_bit(NETDEV_LED_MODE_LINKUP, &trigger_data->mode); ++ trigger_data->carrier_link_up = netif_carrier_ok(dev); + break; + } + diff --git a/target/linux/generic/backport-6.1/803-v6.5-03-leds-trigger-netdev-Rename-add-namespace-to-netdev-t.patch b/target/linux/generic/backport-6.1/803-v6.5-03-leds-trigger-netdev-Rename-add-namespace-to-netdev-t.patch new file mode 100644 index 0000000000..19cc1d7c9e --- /dev/null +++ b/target/linux/generic/backport-6.1/803-v6.5-03-leds-trigger-netdev-Rename-add-namespace-to-netdev-t.patch @@ -0,0 +1,149 @@ +From bdec9cb83936e0ac4cb87fed5b49fad0175f7dec Mon Sep 17 00:00:00 2001 +From: Christian Marangi +Date: Wed, 19 Apr 2023 23:07:41 +0200 +Subject: [PATCH 3/5] leds: trigger: netdev: Rename add namespace to netdev + trigger enum modes + +Rename NETDEV trigger enum modes to a more symbolic name and add a +namespace to them. + +Also add __TRIGGER_NETDEV_MAX to identify the max modes of the netdev +trigger. + +This is a cleanup to drop the define and no behaviour change are +intended. + +Signed-off-by: Christian Marangi +Reviewed-by: Andrew Lunn +Signed-off-by: Lee Jones +Link: https://lore.kernel.org/r/20230419210743.3594-4-ansuelsmth@gmail.com +--- + drivers/leds/trigger/ledtrig-netdev.c | 58 ++++++++++++--------------- + 1 file changed, 25 insertions(+), 33 deletions(-) + +--- a/drivers/leds/trigger/ledtrig-netdev.c ++++ b/drivers/leds/trigger/ledtrig-netdev.c +@@ -51,15 +51,15 @@ struct led_netdev_data { + + unsigned long mode; + bool carrier_link_up; +-#define NETDEV_LED_LINK 0 +-#define NETDEV_LED_TX 1 +-#define NETDEV_LED_RX 2 + }; + +-enum netdev_led_attr { +- NETDEV_ATTR_LINK, +- NETDEV_ATTR_TX, +- NETDEV_ATTR_RX ++enum led_trigger_netdev_modes { ++ TRIGGER_NETDEV_LINK = 0, ++ TRIGGER_NETDEV_TX, ++ TRIGGER_NETDEV_RX, ++ ++ /* Keep last */ ++ __TRIGGER_NETDEV_MAX, + }; + + static void set_baseline_state(struct led_netdev_data *trigger_data) +@@ -76,7 +76,7 @@ static void set_baseline_state(struct le + if (!trigger_data->carrier_link_up) { + led_set_brightness(led_cdev, LED_OFF); + } else { +- if (test_bit(NETDEV_LED_LINK, &trigger_data->mode)) ++ if (test_bit(TRIGGER_NETDEV_LINK, &trigger_data->mode)) + led_set_brightness(led_cdev, + led_cdev->blink_brightness); + else +@@ -85,8 +85,8 @@ static void set_baseline_state(struct le + /* If we are looking for RX/TX start periodically + * checking stats + */ +- if (test_bit(NETDEV_LED_TX, &trigger_data->mode) || +- test_bit(NETDEV_LED_RX, &trigger_data->mode)) ++ if (test_bit(TRIGGER_NETDEV_TX, &trigger_data->mode) || ++ test_bit(TRIGGER_NETDEV_RX, &trigger_data->mode)) + schedule_delayed_work(&trigger_data->work, 0); + } + } +@@ -146,20 +146,16 @@ static ssize_t device_name_store(struct + static DEVICE_ATTR_RW(device_name); + + static ssize_t netdev_led_attr_show(struct device *dev, char *buf, +- enum netdev_led_attr attr) ++ enum led_trigger_netdev_modes attr) + { + struct led_netdev_data *trigger_data = led_trigger_get_drvdata(dev); + int bit; + + switch (attr) { +- case NETDEV_ATTR_LINK: +- bit = NETDEV_LED_LINK; +- break; +- case NETDEV_ATTR_TX: +- bit = NETDEV_LED_TX; +- break; +- case NETDEV_ATTR_RX: +- bit = NETDEV_LED_RX; ++ case TRIGGER_NETDEV_LINK: ++ case TRIGGER_NETDEV_TX: ++ case TRIGGER_NETDEV_RX: ++ bit = attr; + break; + default: + return -EINVAL; +@@ -169,7 +165,7 @@ static ssize_t netdev_led_attr_show(stru + } + + static ssize_t netdev_led_attr_store(struct device *dev, const char *buf, +- size_t size, enum netdev_led_attr attr) ++ size_t size, enum led_trigger_netdev_modes attr) + { + struct led_netdev_data *trigger_data = led_trigger_get_drvdata(dev); + unsigned long state; +@@ -181,14 +177,10 @@ static ssize_t netdev_led_attr_store(str + return ret; + + switch (attr) { +- case NETDEV_ATTR_LINK: +- bit = NETDEV_LED_LINK; +- break; +- case NETDEV_ATTR_TX: +- bit = NETDEV_LED_TX; +- break; +- case NETDEV_ATTR_RX: +- bit = NETDEV_LED_RX; ++ case TRIGGER_NETDEV_LINK: ++ case TRIGGER_NETDEV_TX: ++ case TRIGGER_NETDEV_RX: ++ bit = attr; + break; + default: + return -EINVAL; +@@ -360,21 +352,21 @@ static void netdev_trig_work(struct work + } + + /* If we are not looking for RX/TX then return */ +- if (!test_bit(NETDEV_LED_TX, &trigger_data->mode) && +- !test_bit(NETDEV_LED_RX, &trigger_data->mode)) ++ if (!test_bit(TRIGGER_NETDEV_TX, &trigger_data->mode) && ++ !test_bit(TRIGGER_NETDEV_RX, &trigger_data->mode)) + return; + + dev_stats = dev_get_stats(trigger_data->net_dev, &temp); + new_activity = +- (test_bit(NETDEV_LED_TX, &trigger_data->mode) ? ++ (test_bit(TRIGGER_NETDEV_TX, &trigger_data->mode) ? + dev_stats->tx_packets : 0) + +- (test_bit(NETDEV_LED_RX, &trigger_data->mode) ? ++ (test_bit(TRIGGER_NETDEV_RX, &trigger_data->mode) ? + dev_stats->rx_packets : 0); + + if (trigger_data->last_activity != new_activity) { + led_stop_software_blink(trigger_data->led_cdev); + +- invert = test_bit(NETDEV_LED_LINK, &trigger_data->mode); ++ invert = test_bit(TRIGGER_NETDEV_LINK, &trigger_data->mode); + interval = jiffies_to_msecs( + atomic_read(&trigger_data->interval)); + /* base state is ON (link present) */ diff --git a/target/linux/generic/backport-6.1/803-v6.5-04-leds-trigger-netdev-Convert-device-attr-to-macro.patch b/target/linux/generic/backport-6.1/803-v6.5-04-leds-trigger-netdev-Convert-device-attr-to-macro.patch new file mode 100644 index 0000000000..3b45951f57 --- /dev/null +++ b/target/linux/generic/backport-6.1/803-v6.5-04-leds-trigger-netdev-Convert-device-attr-to-macro.patch @@ -0,0 +1,82 @@ +From 164b67d53476a9d114be85c885bd31f783835be4 Mon Sep 17 00:00:00 2001 +From: Christian Marangi +Date: Wed, 19 Apr 2023 23:07:42 +0200 +Subject: [PATCH 4/5] leds: trigger: netdev: Convert device attr to macro + +Convert link tx and rx device attr to a common macro to reduce common +code and in preparation for additional attr. + +Signed-off-by: Christian Marangi +Reviewed-by: Andrew Lunn +Signed-off-by: Lee Jones +Link: https://lore.kernel.org/r/20230419210743.3594-5-ansuelsmth@gmail.com +--- + drivers/leds/trigger/ledtrig-netdev.c | 57 ++++++++------------------- + 1 file changed, 16 insertions(+), 41 deletions(-) + +--- a/drivers/leds/trigger/ledtrig-netdev.c ++++ b/drivers/leds/trigger/ledtrig-netdev.c +@@ -198,47 +198,22 @@ static ssize_t netdev_led_attr_store(str + return size; + } + +-static ssize_t link_show(struct device *dev, +- struct device_attribute *attr, char *buf) +-{ +- return netdev_led_attr_show(dev, buf, NETDEV_ATTR_LINK); +-} +- +-static ssize_t link_store(struct device *dev, +- struct device_attribute *attr, const char *buf, size_t size) +-{ +- return netdev_led_attr_store(dev, buf, size, NETDEV_ATTR_LINK); +-} +- +-static DEVICE_ATTR_RW(link); +- +-static ssize_t tx_show(struct device *dev, +- struct device_attribute *attr, char *buf) +-{ +- return netdev_led_attr_show(dev, buf, NETDEV_ATTR_TX); +-} +- +-static ssize_t tx_store(struct device *dev, +- struct device_attribute *attr, const char *buf, size_t size) +-{ +- return netdev_led_attr_store(dev, buf, size, NETDEV_ATTR_TX); +-} +- +-static DEVICE_ATTR_RW(tx); +- +-static ssize_t rx_show(struct device *dev, +- struct device_attribute *attr, char *buf) +-{ +- return netdev_led_attr_show(dev, buf, NETDEV_ATTR_RX); +-} +- +-static ssize_t rx_store(struct device *dev, +- struct device_attribute *attr, const char *buf, size_t size) +-{ +- return netdev_led_attr_store(dev, buf, size, NETDEV_ATTR_RX); +-} +- +-static DEVICE_ATTR_RW(rx); ++#define DEFINE_NETDEV_TRIGGER(trigger_name, trigger) \ ++ static ssize_t trigger_name##_show(struct device *dev, \ ++ struct device_attribute *attr, char *buf) \ ++ { \ ++ return netdev_led_attr_show(dev, buf, trigger); \ ++ } \ ++ static ssize_t trigger_name##_store(struct device *dev, \ ++ struct device_attribute *attr, const char *buf, size_t size) \ ++ { \ ++ return netdev_led_attr_store(dev, buf, size, trigger); \ ++ } \ ++ static DEVICE_ATTR_RW(trigger_name) ++ ++DEFINE_NETDEV_TRIGGER(link, TRIGGER_NETDEV_LINK); ++DEFINE_NETDEV_TRIGGER(tx, TRIGGER_NETDEV_TX); ++DEFINE_NETDEV_TRIGGER(rx, TRIGGER_NETDEV_RX); + + static ssize_t interval_show(struct device *dev, + struct device_attribute *attr, char *buf) diff --git a/target/linux/generic/backport-6.1/803-v6.5-05-leds-trigger-netdev-Use-mutex-instead-of-spinlocks.patch b/target/linux/generic/backport-6.1/803-v6.5-05-leds-trigger-netdev-Use-mutex-instead-of-spinlocks.patch new file mode 100644 index 0000000000..180bee9612 --- /dev/null +++ b/target/linux/generic/backport-6.1/803-v6.5-05-leds-trigger-netdev-Use-mutex-instead-of-spinlocks.patch @@ -0,0 +1,106 @@ +From d1b9e1391ab2dc80e9db87fe8b2de015c651e4c9 Mon Sep 17 00:00:00 2001 +From: Christian Marangi +Date: Wed, 19 Apr 2023 23:07:43 +0200 +Subject: [PATCH 5/5] leds: trigger: netdev: Use mutex instead of spinlocks + +Some LEDs may require to sleep while doing some operation like setting +brightness and other cleanup. + +For this reason, using a spinlock will cause a sleep under spinlock +warning. + +It should be safe to convert this to a sleepable lock since: +- sysfs read/write can sleep +- netdev_trig_work is a work queue and can sleep +- netdev _trig_notify can sleep + +The spinlock was used when brightness didn't support sleeping, but this +changed and now it supported with brightness_set_blocking(). + +Convert to mutex lock to permit sleeping using brightness_set_blocking(). + +Signed-off-by: Christian Marangi +Reviewed-by: Andrew Lunn +Signed-off-by: Lee Jones +Link: https://lore.kernel.org/r/20230419210743.3594-6-ansuelsmth@gmail.com +--- + drivers/leds/trigger/ledtrig-netdev.c | 18 +++++++++--------- + 1 file changed, 9 insertions(+), 9 deletions(-) + +--- a/drivers/leds/trigger/ledtrig-netdev.c ++++ b/drivers/leds/trigger/ledtrig-netdev.c +@@ -20,7 +20,7 @@ + #include + #include + #include +-#include ++#include + #include + #include "../leds.h" + +@@ -37,7 +37,7 @@ + */ + + struct led_netdev_data { +- spinlock_t lock; ++ struct mutex lock; + + struct delayed_work work; + struct notifier_block notifier; +@@ -97,9 +97,9 @@ static ssize_t device_name_show(struct d + struct led_netdev_data *trigger_data = led_trigger_get_drvdata(dev); + ssize_t len; + +- spin_lock_bh(&trigger_data->lock); ++ mutex_lock(&trigger_data->lock); + len = sprintf(buf, "%s\n", trigger_data->device_name); +- spin_unlock_bh(&trigger_data->lock); ++ mutex_unlock(&trigger_data->lock); + + return len; + } +@@ -115,7 +115,7 @@ static ssize_t device_name_store(struct + + cancel_delayed_work_sync(&trigger_data->work); + +- spin_lock_bh(&trigger_data->lock); ++ mutex_lock(&trigger_data->lock); + + if (trigger_data->net_dev) { + dev_put(trigger_data->net_dev); +@@ -138,7 +138,7 @@ static ssize_t device_name_store(struct + trigger_data->last_activity = 0; + + set_baseline_state(trigger_data); +- spin_unlock_bh(&trigger_data->lock); ++ mutex_unlock(&trigger_data->lock); + + return size; + } +@@ -279,7 +279,7 @@ static int netdev_trig_notify(struct not + + cancel_delayed_work_sync(&trigger_data->work); + +- spin_lock_bh(&trigger_data->lock); ++ mutex_lock(&trigger_data->lock); + + trigger_data->carrier_link_up = false; + switch (evt) { +@@ -304,7 +304,7 @@ static int netdev_trig_notify(struct not + + set_baseline_state(trigger_data); + +- spin_unlock_bh(&trigger_data->lock); ++ mutex_unlock(&trigger_data->lock); + + return NOTIFY_DONE; + } +@@ -365,7 +365,7 @@ static int netdev_trig_activate(struct l + if (!trigger_data) + return -ENOMEM; + +- spin_lock_init(&trigger_data->lock); ++ mutex_init(&trigger_data->lock); + + trigger_data->notifier.notifier_call = netdev_trig_notify; + trigger_data->notifier.priority = 10; diff --git a/target/linux/generic/backport-6.1/804-v6.5-01-leds-add-APIs-for-LEDs-hw-control.patch b/target/linux/generic/backport-6.1/804-v6.5-01-leds-add-APIs-for-LEDs-hw-control.patch new file mode 100644 index 0000000000..ac18611733 --- /dev/null +++ b/target/linux/generic/backport-6.1/804-v6.5-01-leds-add-APIs-for-LEDs-hw-control.patch @@ -0,0 +1,74 @@ +From ed554d3f945179c5b159bddfad7be34b403fe11a Mon Sep 17 00:00:00 2001 +From: Christian Marangi +Date: Mon, 29 May 2023 18:32:31 +0200 +Subject: [PATCH 01/13] leds: add APIs for LEDs hw control + +Add an option to permit LED driver to declare support for a specific +trigger to use hw control and setup the LED to blink based on specific +provided modes. + +Add APIs for LEDs hw control. These functions will be used to activate +hardware control where a LED will use the provided flags, from an +unique defined supported trigger, to setup the LED to be driven by +hardware. + +Add hw_control_is_supported() to ask the LED driver if the requested +mode by the trigger are supported and the LED can be setup to follow +the requested modes. + +Deactivate hardware blink control by setting brightness to LED_OFF via +the brightness_set() callback. + +Signed-off-by: Christian Marangi +Reviewed-by: Andrew Lunn +Signed-off-by: David S. Miller +--- + include/linux/leds.h | 37 +++++++++++++++++++++++++++++++++++++ + 1 file changed, 37 insertions(+) + +--- a/include/linux/leds.h ++++ b/include/linux/leds.h +@@ -164,6 +164,43 @@ struct led_classdev { + + /* LEDs that have private triggers have this set */ + struct led_hw_trigger_type *trigger_type; ++ ++ /* Unique trigger name supported by LED set in hw control mode */ ++ const char *hw_control_trigger; ++ /* ++ * Check if the LED driver supports the requested mode provided by the ++ * defined supported trigger to setup the LED to hw control mode. ++ * ++ * Return 0 on success. Return -EOPNOTSUPP when the passed flags are not ++ * supported and software fallback needs to be used. ++ * Return a negative error number on any other case for check fail due ++ * to various reason like device not ready or timeouts. ++ */ ++ int (*hw_control_is_supported)(struct led_classdev *led_cdev, ++ unsigned long flags); ++ /* ++ * Activate hardware control, LED driver will use the provided flags ++ * from the supported trigger and setup the LED to be driven by hardware ++ * following the requested mode from the trigger flags. ++ * Deactivate hardware blink control by setting brightness to LED_OFF via ++ * the brightness_set() callback. ++ * ++ * Return 0 on success, a negative error number on flags apply fail. ++ */ ++ int (*hw_control_set)(struct led_classdev *led_cdev, ++ unsigned long flags); ++ /* ++ * Get from the LED driver the current mode that the LED is set in hw ++ * control mode and put them in flags. ++ * Trigger can use this to get the initial state of a LED already set in ++ * hardware blink control. ++ * ++ * Return 0 on success, a negative error number on failing parsing the ++ * initial mode. Error from this function is NOT FATAL as the device ++ * may be in a not supported initial state by the attached LED trigger. ++ */ ++ int (*hw_control_get)(struct led_classdev *led_cdev, ++ unsigned long *flags); + #endif + + #ifdef CONFIG_LEDS_BRIGHTNESS_HW_CHANGED diff --git a/target/linux/generic/backport-6.1/804-v6.5-02-leds-add-API-to-get-attached-device-for-LED-hw-contr.patch b/target/linux/generic/backport-6.1/804-v6.5-02-leds-add-API-to-get-attached-device-for-LED-hw-contr.patch new file mode 100644 index 0000000000..1a221727a0 --- /dev/null +++ b/target/linux/generic/backport-6.1/804-v6.5-02-leds-add-API-to-get-attached-device-for-LED-hw-contr.patch @@ -0,0 +1,37 @@ +From 052c38eb17e866c5b4cd43924e7a5e20167b55c0 Mon Sep 17 00:00:00 2001 +From: Andrew Lunn +Date: Mon, 29 May 2023 18:32:32 +0200 +Subject: [PATCH 02/13] leds: add API to get attached device for LED hw control + +Some specific LED triggers blink the LED based on events from a device +or subsystem. +For example, an LED could be blinked to indicate a network device is +receiving packets, or a disk is reading blocks. To correctly enable and +request the hw control of the LED, the trigger has to check if the +network interface or block device configured via a /sys/class/led file +match the one the LED driver provide for hw control for. + +Provide an API call to get the device which the LED blinks for. + +Signed-off-by: Andrew Lunn +Signed-off-by: Christian Marangi +Signed-off-by: David S. Miller +--- + include/linux/leds.h | 6 ++++++ + 1 file changed, 6 insertions(+) + +--- a/include/linux/leds.h ++++ b/include/linux/leds.h +@@ -201,6 +201,12 @@ struct led_classdev { + */ + int (*hw_control_get)(struct led_classdev *led_cdev, + unsigned long *flags); ++ /* ++ * Get the device this LED blinks in response to. ++ * e.g. for a PHY LED, it is the network device. If the LED is ++ * not yet associated to a device, return NULL. ++ */ ++ struct device *(*hw_control_get_device)(struct led_classdev *led_cdev); + #endif + + #ifdef CONFIG_LEDS_BRIGHTNESS_HW_CHANGED diff --git a/target/linux/generic/backport-6.1/804-v6.5-03-Documentation-leds-leds-class-Document-new-Hardware-.patch b/target/linux/generic/backport-6.1/804-v6.5-03-Documentation-leds-leds-class-Document-new-Hardware-.patch new file mode 100644 index 0000000000..af9fb7fdc3 --- /dev/null +++ b/target/linux/generic/backport-6.1/804-v6.5-03-Documentation-leds-leds-class-Document-new-Hardware-.patch @@ -0,0 +1,113 @@ +From 8aa2fd7b66980ecd2e45e95af61cf7eafede1211 Mon Sep 17 00:00:00 2001 +From: Christian Marangi +Date: Mon, 29 May 2023 18:32:33 +0200 +Subject: [PATCH 03/13] Documentation: leds: leds-class: Document new Hardware + driven LEDs APIs + +Document new Hardware driven LEDs APIs. + +Some LEDs can be programmed to be driven by hardware. This is not +limited to blink but also to turn off or on autonomously. +To support this feature, a LED needs to implement various additional +ops and needs to declare specific support for the supported triggers. + +Add documentation for each required value and API to make hw control +possible and implementable by both LEDs and triggers. + +Signed-off-by: Christian Marangi +Reviewed-by: Andrew Lunn +Signed-off-by: David S. Miller +--- + Documentation/leds/leds-class.rst | 81 +++++++++++++++++++++++++++++++ + 1 file changed, 81 insertions(+) + +--- a/Documentation/leds/leds-class.rst ++++ b/Documentation/leds/leds-class.rst +@@ -169,6 +169,87 @@ Setting the brightness to zero with brig + should completely turn off the LED and cancel the previously programmed + hardware blinking function, if any. + ++Hardware driven LEDs ++==================== ++ ++Some LEDs can be programmed to be driven by hardware. This is not ++limited to blink but also to turn off or on autonomously. ++To support this feature, a LED needs to implement various additional ++ops and needs to declare specific support for the supported triggers. ++ ++With hw control we refer to the LED driven by hardware. ++ ++LED driver must define the following value to support hw control: ++ ++ - hw_control_trigger: ++ unique trigger name supported by the LED in hw control ++ mode. ++ ++LED driver must implement the following API to support hw control: ++ - hw_control_is_supported: ++ check if the flags passed by the supported trigger can ++ be parsed and activate hw control on the LED. ++ ++ Return 0 if the passed flags mask is supported and ++ can be set with hw_control_set(). ++ ++ If the passed flags mask is not supported -EOPNOTSUPP ++ must be returned, the LED trigger will use software ++ fallback in this case. ++ ++ Return a negative error in case of any other error like ++ device not ready or timeouts. ++ ++ - hw_control_set: ++ activate hw control. LED driver will use the provided ++ flags passed from the supported trigger, parse them to ++ a set of mode and setup the LED to be driven by hardware ++ following the requested modes. ++ ++ Set LED_OFF via the brightness_set to deactivate hw control. ++ ++ Return 0 on success, a negative error number on failing to ++ apply flags. ++ ++ - hw_control_get: ++ get active modes from a LED already in hw control, parse ++ them and set in flags the current active flags for the ++ supported trigger. ++ ++ Return 0 on success, a negative error number on failing ++ parsing the initial mode. ++ Error from this function is NOT FATAL as the device may ++ be in a not supported initial state by the attached LED ++ trigger. ++ ++ - hw_control_get_device: ++ return the device associated with the LED driver in ++ hw control. A trigger might use this to match the ++ returned device from this function with a configured ++ device for the trigger as the source for blinking ++ events and correctly enable hw control. ++ (example a netdev trigger configured to blink for a ++ particular dev match the returned dev from get_device ++ to set hw control) ++ ++ Returns a pointer to a struct device or NULL if nothing ++ is currently attached. ++ ++LED driver can activate additional modes by default to workaround the ++impossibility of supporting each different mode on the supported trigger. ++Examples are hardcoding the blink speed to a set interval, enable special ++feature like bypassing blink if some requirements are not met. ++ ++A trigger should first check if the hw control API are supported by the LED ++driver and check if the trigger is supported to verify if hw control is possible, ++use hw_control_is_supported to check if the flags are supported and only at ++the end use hw_control_set to activate hw control. ++ ++A trigger can use hw_control_get to check if a LED is already in hw control ++and init their flags. ++ ++When the LED is in hw control, no software blink is possible and doing so ++will effectively disable hw control. + + Known Issues + ============ diff --git a/target/linux/generic/backport-6.1/804-v6.5-04-leds-trigger-netdev-refactor-code-setting-device-nam.patch b/target/linux/generic/backport-6.1/804-v6.5-04-leds-trigger-netdev-refactor-code-setting-device-nam.patch new file mode 100644 index 0000000000..3c804c0b41 --- /dev/null +++ b/target/linux/generic/backport-6.1/804-v6.5-04-leds-trigger-netdev-refactor-code-setting-device-nam.patch @@ -0,0 +1,69 @@ +From 28a6a2ef18ad840a390d519840c303b03040961c Mon Sep 17 00:00:00 2001 +From: Andrew Lunn +Date: Mon, 29 May 2023 18:32:34 +0200 +Subject: [PATCH 04/13] leds: trigger: netdev: refactor code setting device + name + +Move the code into a helper, ready for it to be called at +other times. No intended behaviour change. + +Signed-off-by: Andrew Lunn +Signed-off-by: Christian Marangi +Signed-off-by: David S. Miller +--- + drivers/leds/trigger/ledtrig-netdev.c | 29 ++++++++++++++++++--------- + 1 file changed, 20 insertions(+), 9 deletions(-) + +--- a/drivers/leds/trigger/ledtrig-netdev.c ++++ b/drivers/leds/trigger/ledtrig-netdev.c +@@ -104,15 +104,9 @@ static ssize_t device_name_show(struct d + return len; + } + +-static ssize_t device_name_store(struct device *dev, +- struct device_attribute *attr, const char *buf, +- size_t size) ++static int set_device_name(struct led_netdev_data *trigger_data, ++ const char *name, size_t size) + { +- struct led_netdev_data *trigger_data = led_trigger_get_drvdata(dev); +- +- if (size >= IFNAMSIZ) +- return -EINVAL; +- + cancel_delayed_work_sync(&trigger_data->work); + + mutex_lock(&trigger_data->lock); +@@ -122,7 +116,7 @@ static ssize_t device_name_store(struct + trigger_data->net_dev = NULL; + } + +- memcpy(trigger_data->device_name, buf, size); ++ memcpy(trigger_data->device_name, name, size); + trigger_data->device_name[size] = 0; + if (size > 0 && trigger_data->device_name[size - 1] == '\n') + trigger_data->device_name[size - 1] = 0; +@@ -140,6 +134,23 @@ static ssize_t device_name_store(struct + set_baseline_state(trigger_data); + mutex_unlock(&trigger_data->lock); + ++ return 0; ++} ++ ++static ssize_t device_name_store(struct device *dev, ++ struct device_attribute *attr, const char *buf, ++ size_t size) ++{ ++ struct led_netdev_data *trigger_data = led_trigger_get_drvdata(dev); ++ int ret; ++ ++ if (size >= IFNAMSIZ) ++ return -EINVAL; ++ ++ ret = set_device_name(trigger_data, buf, size); ++ ++ if (ret < 0) ++ return ret; + return size; + } + diff --git a/target/linux/generic/backport-6.1/804-v6.5-05-leds-trigger-netdev-introduce-check-for-possible-hw-.patch b/target/linux/generic/backport-6.1/804-v6.5-05-leds-trigger-netdev-introduce-check-for-possible-hw-.patch new file mode 100644 index 0000000000..284b519482 --- /dev/null +++ b/target/linux/generic/backport-6.1/804-v6.5-05-leds-trigger-netdev-introduce-check-for-possible-hw-.patch @@ -0,0 +1,54 @@ +From 4fd1b6d47a7a38e81fdc6f8be2ccd4216b3f93db Mon Sep 17 00:00:00 2001 +From: Christian Marangi +Date: Mon, 29 May 2023 18:32:35 +0200 +Subject: [PATCH 05/13] leds: trigger: netdev: introduce check for possible hw + control + +Introduce function to check if the requested mode can use hw control in +preparation for hw control support. Currently everything is handled in +software so can_hw_control will always return false. + +Add knob with the new value hw_control in trigger_data struct to +set hw control possible. Useful for future implementation to implement +in set_baseline_state() the required function to set the requested mode +using LEDs hw control ops and in other function to reject set if hw +control is currently active. + +Signed-off-by: Christian Marangi +Reviewed-by: Andrew Lunn +Signed-off-by: David S. Miller +--- + drivers/leds/trigger/ledtrig-netdev.c | 8 ++++++++ + 1 file changed, 8 insertions(+) + +--- a/drivers/leds/trigger/ledtrig-netdev.c ++++ b/drivers/leds/trigger/ledtrig-netdev.c +@@ -51,6 +51,7 @@ struct led_netdev_data { + + unsigned long mode; + bool carrier_link_up; ++ bool hw_control; + }; + + enum led_trigger_netdev_modes { +@@ -91,6 +92,11 @@ static void set_baseline_state(struct le + } + } + ++static bool can_hw_control(struct led_netdev_data *trigger_data) ++{ ++ return false; ++} ++ + static ssize_t device_name_show(struct device *dev, + struct device_attribute *attr, char *buf) + { +@@ -204,6 +210,8 @@ static ssize_t netdev_led_attr_store(str + else + clear_bit(bit, &trigger_data->mode); + ++ trigger_data->hw_control = can_hw_control(trigger_data); ++ + set_baseline_state(trigger_data); + + return size; diff --git a/target/linux/generic/backport-6.1/804-v6.5-06-leds-trigger-netdev-add-basic-check-for-hw-control-s.patch b/target/linux/generic/backport-6.1/804-v6.5-06-leds-trigger-netdev-add-basic-check-for-hw-control-s.patch new file mode 100644 index 0000000000..09759bc623 --- /dev/null +++ b/target/linux/generic/backport-6.1/804-v6.5-06-leds-trigger-netdev-add-basic-check-for-hw-control-s.patch @@ -0,0 +1,42 @@ +From 6352f25f9fadba59d5df2ba7139495759ccc81d5 Mon Sep 17 00:00:00 2001 +From: Christian Marangi +Date: Mon, 29 May 2023 18:32:36 +0200 +Subject: [PATCH 06/13] leds: trigger: netdev: add basic check for hw control + support + +Add basic check for hw control support. Check if the required API are +defined and check if the defined trigger supported in hw control for the +LED driver match netdev. + +Signed-off-by: Christian Marangi +Reviewed-by: Andrew Lunn +Signed-off-by: David S. Miller +--- + drivers/leds/trigger/ledtrig-netdev.c | 14 ++++++++++++++ + 1 file changed, 14 insertions(+) + +--- a/drivers/leds/trigger/ledtrig-netdev.c ++++ b/drivers/leds/trigger/ledtrig-netdev.c +@@ -92,8 +92,22 @@ static void set_baseline_state(struct le + } + } + ++static bool supports_hw_control(struct led_classdev *led_cdev) ++{ ++ if (!led_cdev->hw_control_get || !led_cdev->hw_control_set || ++ !led_cdev->hw_control_is_supported) ++ return false; ++ ++ return !strcmp(led_cdev->hw_control_trigger, led_cdev->trigger->name); ++} ++ + static bool can_hw_control(struct led_netdev_data *trigger_data) + { ++ struct led_classdev *led_cdev = trigger_data->led_cdev; ++ ++ if (!supports_hw_control(led_cdev)) ++ return false; ++ + return false; + } + diff --git a/target/linux/generic/backport-6.1/804-v6.5-07-leds-trigger-netdev-reject-interval-store-for-hw_con.patch b/target/linux/generic/backport-6.1/804-v6.5-07-leds-trigger-netdev-reject-interval-store-for-hw_con.patch new file mode 100644 index 0000000000..6634906800 --- /dev/null +++ b/target/linux/generic/backport-6.1/804-v6.5-07-leds-trigger-netdev-reject-interval-store-for-hw_con.patch @@ -0,0 +1,28 @@ +From c84c80c7388f887b10dafd70fc55bc6c5fe9fa5a Mon Sep 17 00:00:00 2001 +From: Christian Marangi +Date: Mon, 29 May 2023 18:32:37 +0200 +Subject: [PATCH 07/13] leds: trigger: netdev: reject interval store for + hw_control + +Reject interval store with hw_control enabled. It's are currently not +supported and MUST be set to the default value with hw control enabled. + +Signed-off-by: Christian Marangi +Reviewed-by: Andrew Lunn +Signed-off-by: David S. Miller +--- + drivers/leds/trigger/ledtrig-netdev.c | 3 +++ + 1 file changed, 3 insertions(+) + +--- a/drivers/leds/trigger/ledtrig-netdev.c ++++ b/drivers/leds/trigger/ledtrig-netdev.c +@@ -265,6 +265,9 @@ static ssize_t interval_store(struct dev + unsigned long value; + int ret; + ++ if (trigger_data->hw_control) ++ return -EINVAL; ++ + ret = kstrtoul(buf, 0, &value); + if (ret) + return ret; diff --git a/target/linux/generic/backport-6.1/804-v6.5-08-leds-trigger-netdev-add-support-for-LED-hw-control.patch b/target/linux/generic/backport-6.1/804-v6.5-08-leds-trigger-netdev-add-support-for-LED-hw-control.patch new file mode 100644 index 0000000000..52faa4809b --- /dev/null +++ b/target/linux/generic/backport-6.1/804-v6.5-08-leds-trigger-netdev-add-support-for-LED-hw-control.patch @@ -0,0 +1,107 @@ +From 7c145a34ba6e380616af93262fcab9fc7261d851 Mon Sep 17 00:00:00 2001 +From: Christian Marangi +Date: Mon, 29 May 2023 18:32:38 +0200 +Subject: [PATCH 08/13] leds: trigger: netdev: add support for LED hw control + +Add support for LED hw control for the netdev trigger. + +The trigger on calling set_baseline_state to configure a new mode, will +do various check to verify if hw control can be used for the requested +mode in can_hw_control() function. + +It will first check if the LED driver supports hw control for the netdev +trigger, then will use hw_control_is_supported() and finally will call +hw_control_set() to apply the requested mode. + +To use such mode, interval MUST be set to the default value and net_dev +MUST be set. If one of these 2 value are not valid, hw control will +never be used and normal software fallback is used. + +The default interval value is moved to a define to make sure they are +always synced. + +Signed-off-by: Christian Marangi +Reviewed-by: Andrew Lunn +Signed-off-by: David S. Miller +--- + drivers/leds/trigger/ledtrig-netdev.c | 43 +++++++++++++++++++++++++-- + 1 file changed, 41 insertions(+), 2 deletions(-) + +--- a/drivers/leds/trigger/ledtrig-netdev.c ++++ b/drivers/leds/trigger/ledtrig-netdev.c +@@ -24,6 +24,8 @@ + #include + #include "../leds.h" + ++#define NETDEV_LED_DEFAULT_INTERVAL 50 ++ + /* + * Configurable sysfs attributes: + * +@@ -68,6 +70,13 @@ static void set_baseline_state(struct le + int current_brightness; + struct led_classdev *led_cdev = trigger_data->led_cdev; + ++ /* Already validated, hw control is possible with the requested mode */ ++ if (trigger_data->hw_control) { ++ led_cdev->hw_control_set(led_cdev, trigger_data->mode); ++ ++ return; ++ } ++ + current_brightness = led_cdev->brightness; + if (current_brightness) + led_cdev->blink_brightness = current_brightness; +@@ -103,12 +112,42 @@ static bool supports_hw_control(struct l + + static bool can_hw_control(struct led_netdev_data *trigger_data) + { ++ unsigned long default_interval = msecs_to_jiffies(NETDEV_LED_DEFAULT_INTERVAL); ++ unsigned int interval = atomic_read(&trigger_data->interval); + struct led_classdev *led_cdev = trigger_data->led_cdev; ++ int ret; + + if (!supports_hw_control(led_cdev)) + return false; + +- return false; ++ /* ++ * Interval must be set to the default ++ * value. Any different value is rejected if in hw ++ * control. ++ */ ++ if (interval != default_interval) ++ return false; ++ ++ /* ++ * net_dev must be set with hw control, otherwise no ++ * blinking can be happening and there is nothing to ++ * offloaded. ++ */ ++ if (!trigger_data->net_dev) ++ return false; ++ ++ /* Check if the requested mode is supported */ ++ ret = led_cdev->hw_control_is_supported(led_cdev, trigger_data->mode); ++ /* Fall back to software blinking if not supported */ ++ if (ret == -EOPNOTSUPP) ++ return false; ++ if (ret) { ++ dev_warn(led_cdev->dev, ++ "Current mode check failed with error %d\n", ret); ++ return false; ++ } ++ ++ return true; + } + + static ssize_t device_name_show(struct device *dev, +@@ -413,7 +452,7 @@ static int netdev_trig_activate(struct l + trigger_data->device_name[0] = 0; + + trigger_data->mode = 0; +- atomic_set(&trigger_data->interval, msecs_to_jiffies(50)); ++ atomic_set(&trigger_data->interval, msecs_to_jiffies(NETDEV_LED_DEFAULT_INTERVAL)); + trigger_data->last_activity = 0; + + led_set_trigger_data(led_cdev, trigger_data); diff --git a/target/linux/generic/backport-6.1/804-v6.5-09-leds-trigger-netdev-validate-configured-netdev.patch b/target/linux/generic/backport-6.1/804-v6.5-09-leds-trigger-netdev-validate-configured-netdev.patch new file mode 100644 index 0000000000..c129ffa4f5 --- /dev/null +++ b/target/linux/generic/backport-6.1/804-v6.5-09-leds-trigger-netdev-validate-configured-netdev.patch @@ -0,0 +1,58 @@ +From 33ec0b53befff2c0a7f3aa19ff08556d60585d6b Mon Sep 17 00:00:00 2001 +From: Andrew Lunn +Date: Mon, 29 May 2023 18:32:39 +0200 +Subject: [PATCH 09/13] leds: trigger: netdev: validate configured netdev + +The netdev which the LED should blink for is configurable in +/sys/class/led/foo/device_name. Ensure when offloading that the +configured netdev is the same as the netdev the LED is associated +with. If it is not, only perform software blinking. + +Signed-off-by: Andrew Lunn +Signed-off-by: Christian Marangi +Signed-off-by: David S. Miller +--- + drivers/leds/trigger/ledtrig-netdev.c | 24 ++++++++++++++++++++++-- + 1 file changed, 22 insertions(+), 2 deletions(-) + +--- a/drivers/leds/trigger/ledtrig-netdev.c ++++ b/drivers/leds/trigger/ledtrig-netdev.c +@@ -110,6 +110,24 @@ static bool supports_hw_control(struct l + return !strcmp(led_cdev->hw_control_trigger, led_cdev->trigger->name); + } + ++/* ++ * Validate the configured netdev is the same as the one associated with ++ * the LED driver in hw control. ++ */ ++static bool validate_net_dev(struct led_classdev *led_cdev, ++ struct net_device *net_dev) ++{ ++ struct device *dev = led_cdev->hw_control_get_device(led_cdev); ++ struct net_device *ndev; ++ ++ if (!dev) ++ return false; ++ ++ ndev = to_net_dev(dev); ++ ++ return ndev == net_dev; ++} ++ + static bool can_hw_control(struct led_netdev_data *trigger_data) + { + unsigned long default_interval = msecs_to_jiffies(NETDEV_LED_DEFAULT_INTERVAL); +@@ -131,9 +149,11 @@ static bool can_hw_control(struct led_ne + /* + * net_dev must be set with hw control, otherwise no + * blinking can be happening and there is nothing to +- * offloaded. ++ * offloaded. Additionally, for hw control to be ++ * valid, the configured netdev must be the same as ++ * netdev associated to the LED. + */ +- if (!trigger_data->net_dev) ++ if (!validate_net_dev(led_cdev, trigger_data->net_dev)) + return false; + + /* Check if the requested mode is supported */ diff --git a/target/linux/generic/backport-6.1/804-v6.5-10-leds-trigger-netdev-init-mode-if-hw-control-already-.patch b/target/linux/generic/backport-6.1/804-v6.5-10-leds-trigger-netdev-init-mode-if-hw-control-already-.patch new file mode 100644 index 0000000000..e20594c99a --- /dev/null +++ b/target/linux/generic/backport-6.1/804-v6.5-10-leds-trigger-netdev-init-mode-if-hw-control-already-.patch @@ -0,0 +1,53 @@ +From 0316cc5629d15880dd3f097d221c55ca648bcd61 Mon Sep 17 00:00:00 2001 +From: Christian Marangi +Date: Mon, 29 May 2023 18:32:40 +0200 +Subject: [PATCH 10/13] leds: trigger: netdev: init mode if hw control already + active + +On netdev trigger activation, hw control may be already active by +default. If this is the case and a device is actually provided by +hw_control_get_device(), init the already active mode and set the +bool to hw_control bool to true to reflect the already set mode in the +trigger_data. + +Co-developed-by: Andrew Lunn +Signed-off-by: Andrew Lunn +Signed-off-by: Christian Marangi +Signed-off-by: David S. Miller +--- + drivers/leds/trigger/ledtrig-netdev.c | 17 +++++++++++++++++ + 1 file changed, 17 insertions(+) + +--- a/drivers/leds/trigger/ledtrig-netdev.c ++++ b/drivers/leds/trigger/ledtrig-netdev.c +@@ -454,6 +454,8 @@ static void netdev_trig_work(struct work + static int netdev_trig_activate(struct led_classdev *led_cdev) + { + struct led_netdev_data *trigger_data; ++ unsigned long mode; ++ struct device *dev; + int rc; + + trigger_data = kzalloc(sizeof(struct led_netdev_data), GFP_KERNEL); +@@ -475,6 +477,21 @@ static int netdev_trig_activate(struct l + atomic_set(&trigger_data->interval, msecs_to_jiffies(NETDEV_LED_DEFAULT_INTERVAL)); + trigger_data->last_activity = 0; + ++ /* Check if hw control is active by default on the LED. ++ * Init already enabled mode in hw control. ++ */ ++ if (supports_hw_control(led_cdev) && ++ !led_cdev->hw_control_get(led_cdev, &mode)) { ++ dev = led_cdev->hw_control_get_device(led_cdev); ++ if (dev) { ++ const char *name = dev_name(dev); ++ ++ set_device_name(trigger_data, name, strlen(name)); ++ trigger_data->hw_control = true; ++ trigger_data->mode = mode; ++ } ++ } ++ + led_set_trigger_data(led_cdev, trigger_data); + + rc = register_netdevice_notifier(&trigger_data->notifier); diff --git a/target/linux/generic/backport-6.1/804-v6.5-11-leds-trigger-netdev-expose-netdev-trigger-modes-in-l.patch b/target/linux/generic/backport-6.1/804-v6.5-11-leds-trigger-netdev-expose-netdev-trigger-modes-in-l.patch new file mode 100644 index 0000000000..70aed850d1 --- /dev/null +++ b/target/linux/generic/backport-6.1/804-v6.5-11-leds-trigger-netdev-expose-netdev-trigger-modes-in-l.patch @@ -0,0 +1,54 @@ +From 947acacab5ea151291b861cdfbde16ff5cf1b08c Mon Sep 17 00:00:00 2001 +From: Christian Marangi +Date: Mon, 29 May 2023 18:32:41 +0200 +Subject: [PATCH 11/13] leds: trigger: netdev: expose netdev trigger modes in + linux include + +Expose netdev trigger modes to make them accessible by LED driver that +will support netdev trigger for hw control. + +Signed-off-by: Christian Marangi +Reviewed-by: Andrew Lunn +Signed-off-by: David S. Miller +--- + drivers/leds/trigger/ledtrig-netdev.c | 9 --------- + include/linux/leds.h | 10 ++++++++++ + 2 files changed, 10 insertions(+), 9 deletions(-) + +--- a/drivers/leds/trigger/ledtrig-netdev.c ++++ b/drivers/leds/trigger/ledtrig-netdev.c +@@ -56,15 +56,6 @@ struct led_netdev_data { + bool hw_control; + }; + +-enum led_trigger_netdev_modes { +- TRIGGER_NETDEV_LINK = 0, +- TRIGGER_NETDEV_TX, +- TRIGGER_NETDEV_RX, +- +- /* Keep last */ +- __TRIGGER_NETDEV_MAX, +-}; +- + static void set_baseline_state(struct led_netdev_data *trigger_data) + { + int current_brightness; +--- a/include/linux/leds.h ++++ b/include/linux/leds.h +@@ -527,6 +527,16 @@ static inline void *led_get_trigger_data + + #endif /* CONFIG_LEDS_TRIGGERS */ + ++/* Trigger specific enum */ ++enum led_trigger_netdev_modes { ++ TRIGGER_NETDEV_LINK = 0, ++ TRIGGER_NETDEV_TX, ++ TRIGGER_NETDEV_RX, ++ ++ /* Keep last */ ++ __TRIGGER_NETDEV_MAX, ++}; ++ + /* Trigger specific functions */ + #ifdef CONFIG_LEDS_TRIGGER_DISK + void ledtrig_disk_activity(bool write); diff --git a/target/linux/generic/backport-6.1/804-v6.5-12-net-dsa-qca8k-implement-hw_control-ops.patch b/target/linux/generic/backport-6.1/804-v6.5-12-net-dsa-qca8k-implement-hw_control-ops.patch new file mode 100644 index 0000000000..ad76d89b7b --- /dev/null +++ b/target/linux/generic/backport-6.1/804-v6.5-12-net-dsa-qca8k-implement-hw_control-ops.patch @@ -0,0 +1,200 @@ +From e0256648c831af13cbfe4a1787327fcec01c2807 Mon Sep 17 00:00:00 2001 +From: Christian Marangi +Date: Mon, 29 May 2023 18:32:42 +0200 +Subject: [PATCH 12/13] net: dsa: qca8k: implement hw_control ops + +Implement hw_control ops to drive Switch LEDs based on hardware events. + +Netdev trigger is the declared supported trigger for hw control +operation and supports the following mode: +- tx +- rx + +When hw_control_set is called, LEDs are set to follow the requested +mode. +Each LEDs will blink at 4Hz by default. + +Signed-off-by: Christian Marangi +Reviewed-by: Andrew Lunn +Signed-off-by: David S. Miller +--- + drivers/net/dsa/qca/qca8k-leds.c | 154 +++++++++++++++++++++++++++++++ + 1 file changed, 154 insertions(+) + +--- a/drivers/net/dsa/qca/qca8k-leds.c ++++ b/drivers/net/dsa/qca/qca8k-leds.c +@@ -32,6 +32,43 @@ qca8k_get_enable_led_reg(int port_num, i + } + + static int ++qca8k_get_control_led_reg(int port_num, int led_num, struct qca8k_led_pattern_en *reg_info) ++{ ++ reg_info->reg = QCA8K_LED_CTRL_REG(led_num); ++ ++ /* 6 total control rule: ++ * 3 control rules for phy0-3 that applies to all their leds ++ * 3 control rules for phy4 ++ */ ++ if (port_num == 4) ++ reg_info->shift = QCA8K_LED_PHY4_CONTROL_RULE_SHIFT; ++ else ++ reg_info->shift = QCA8K_LED_PHY0123_CONTROL_RULE_SHIFT; ++ ++ return 0; ++} ++ ++static int ++qca8k_parse_netdev(unsigned long rules, u32 *offload_trigger) ++{ ++ /* Parsing specific to netdev trigger */ ++ if (test_bit(TRIGGER_NETDEV_TX, &rules)) ++ *offload_trigger |= QCA8K_LED_TX_BLINK_MASK; ++ if (test_bit(TRIGGER_NETDEV_RX, &rules)) ++ *offload_trigger |= QCA8K_LED_RX_BLINK_MASK; ++ ++ if (rules && !*offload_trigger) ++ return -EOPNOTSUPP; ++ ++ /* Enable some default rule by default to the requested mode: ++ * - Blink at 4Hz by default ++ */ ++ *offload_trigger |= QCA8K_LED_BLINK_4HZ; ++ ++ return 0; ++} ++ ++static int + qca8k_led_brightness_set(struct qca8k_led *led, + enum led_brightness brightness) + { +@@ -165,6 +202,119 @@ qca8k_cled_blink_set(struct led_classdev + } + + static int ++qca8k_cled_trigger_offload(struct led_classdev *ldev, bool enable) ++{ ++ struct qca8k_led *led = container_of(ldev, struct qca8k_led, cdev); ++ ++ struct qca8k_led_pattern_en reg_info; ++ struct qca8k_priv *priv = led->priv; ++ u32 mask, val = QCA8K_LED_ALWAYS_OFF; ++ ++ qca8k_get_enable_led_reg(led->port_num, led->led_num, ®_info); ++ ++ if (enable) ++ val = QCA8K_LED_RULE_CONTROLLED; ++ ++ if (led->port_num == 0 || led->port_num == 4) { ++ mask = QCA8K_LED_PATTERN_EN_MASK; ++ val <<= QCA8K_LED_PATTERN_EN_SHIFT; ++ } else { ++ mask = QCA8K_LED_PHY123_PATTERN_EN_MASK; ++ } ++ ++ return regmap_update_bits(priv->regmap, reg_info.reg, mask << reg_info.shift, ++ val << reg_info.shift); ++} ++ ++static bool ++qca8k_cled_hw_control_status(struct led_classdev *ldev) ++{ ++ struct qca8k_led *led = container_of(ldev, struct qca8k_led, cdev); ++ ++ struct qca8k_led_pattern_en reg_info; ++ struct qca8k_priv *priv = led->priv; ++ u32 val; ++ ++ qca8k_get_enable_led_reg(led->port_num, led->led_num, ®_info); ++ ++ regmap_read(priv->regmap, reg_info.reg, &val); ++ ++ val >>= reg_info.shift; ++ ++ if (led->port_num == 0 || led->port_num == 4) { ++ val &= QCA8K_LED_PATTERN_EN_MASK; ++ val >>= QCA8K_LED_PATTERN_EN_SHIFT; ++ } else { ++ val &= QCA8K_LED_PHY123_PATTERN_EN_MASK; ++ } ++ ++ return val == QCA8K_LED_RULE_CONTROLLED; ++} ++ ++static int ++qca8k_cled_hw_control_is_supported(struct led_classdev *ldev, unsigned long rules) ++{ ++ u32 offload_trigger = 0; ++ ++ return qca8k_parse_netdev(rules, &offload_trigger); ++} ++ ++static int ++qca8k_cled_hw_control_set(struct led_classdev *ldev, unsigned long rules) ++{ ++ struct qca8k_led *led = container_of(ldev, struct qca8k_led, cdev); ++ struct qca8k_led_pattern_en reg_info; ++ struct qca8k_priv *priv = led->priv; ++ u32 offload_trigger = 0; ++ int ret; ++ ++ ret = qca8k_parse_netdev(rules, &offload_trigger); ++ if (ret) ++ return ret; ++ ++ ret = qca8k_cled_trigger_offload(ldev, true); ++ if (ret) ++ return ret; ++ ++ qca8k_get_control_led_reg(led->port_num, led->led_num, ®_info); ++ ++ return regmap_update_bits(priv->regmap, reg_info.reg, ++ QCA8K_LED_RULE_MASK << reg_info.shift, ++ offload_trigger << reg_info.shift); ++} ++ ++static int ++qca8k_cled_hw_control_get(struct led_classdev *ldev, unsigned long *rules) ++{ ++ struct qca8k_led *led = container_of(ldev, struct qca8k_led, cdev); ++ struct qca8k_led_pattern_en reg_info; ++ struct qca8k_priv *priv = led->priv; ++ u32 val; ++ int ret; ++ ++ /* With hw control not active return err */ ++ if (!qca8k_cled_hw_control_status(ldev)) ++ return -EINVAL; ++ ++ qca8k_get_control_led_reg(led->port_num, led->led_num, ®_info); ++ ++ ret = regmap_read(priv->regmap, reg_info.reg, &val); ++ if (ret) ++ return ret; ++ ++ val >>= reg_info.shift; ++ val &= QCA8K_LED_RULE_MASK; ++ ++ /* Parsing specific to netdev trigger */ ++ if (val & QCA8K_LED_TX_BLINK_MASK) ++ set_bit(TRIGGER_NETDEV_TX, rules); ++ if (val & QCA8K_LED_RX_BLINK_MASK) ++ set_bit(TRIGGER_NETDEV_RX, rules); ++ ++ return 0; ++} ++ ++static int + qca8k_parse_port_leds(struct qca8k_priv *priv, struct fwnode_handle *port, int port_num) + { + struct fwnode_handle *led = NULL, *leds = NULL; +@@ -224,6 +374,10 @@ qca8k_parse_port_leds(struct qca8k_priv + port_led->cdev.max_brightness = 1; + port_led->cdev.brightness_set_blocking = qca8k_cled_brightness_set_blocking; + port_led->cdev.blink_set = qca8k_cled_blink_set; ++ port_led->cdev.hw_control_is_supported = qca8k_cled_hw_control_is_supported; ++ port_led->cdev.hw_control_set = qca8k_cled_hw_control_set; ++ port_led->cdev.hw_control_get = qca8k_cled_hw_control_get; ++ port_led->cdev.hw_control_trigger = "netdev"; + init_data.default_label = ":port"; + init_data.fwnode = led; + init_data.devname_mandatory = true; diff --git a/target/linux/generic/backport-6.1/804-v6.5-13-net-dsa-qca8k-add-op-to-get-ports-netdev.patch b/target/linux/generic/backport-6.1/804-v6.5-13-net-dsa-qca8k-add-op-to-get-ports-netdev.patch new file mode 100644 index 0000000000..feb6b9e1e4 --- /dev/null +++ b/target/linux/generic/backport-6.1/804-v6.5-13-net-dsa-qca8k-add-op-to-get-ports-netdev.patch @@ -0,0 +1,70 @@ +From 4f53c27f772e27e4cf4e5507d6f4d5980002cb6a Mon Sep 17 00:00:00 2001 +From: Andrew Lunn +Date: Mon, 29 May 2023 18:32:43 +0200 +Subject: [PATCH 13/13] net: dsa: qca8k: add op to get ports netdev + +In order that the LED trigger can blink the switch MAC ports LED, it +needs to know the netdev associated to the port. Add the callback to +return the struct device of the netdev. + +Add an helper function qca8k_phy_to_port() to convert the phy back to +dsa_port index, as we reference LED port based on the internal PHY +index and needs to be converted back. + +Signed-off-by: Andrew Lunn +Signed-off-by: Christian Marangi +Signed-off-by: David S. Miller +--- + drivers/net/dsa/qca/qca8k-leds.c | 27 +++++++++++++++++++++++++++ + 1 file changed, 27 insertions(+) + +--- a/drivers/net/dsa/qca/qca8k-leds.c ++++ b/drivers/net/dsa/qca/qca8k-leds.c +@@ -5,6 +5,18 @@ + #include "qca8k.h" + #include "qca8k_leds.h" + ++static u32 qca8k_phy_to_port(int phy) ++{ ++ /* Internal PHY 0 has port at index 1. ++ * Internal PHY 1 has port at index 2. ++ * Internal PHY 2 has port at index 3. ++ * Internal PHY 3 has port at index 4. ++ * Internal PHY 4 has port at index 5. ++ */ ++ ++ return phy + 1; ++} ++ + static int + qca8k_get_enable_led_reg(int port_num, int led_num, struct qca8k_led_pattern_en *reg_info) + { +@@ -314,6 +326,20 @@ qca8k_cled_hw_control_get(struct led_cla + return 0; + } + ++static struct device *qca8k_cled_hw_control_get_device(struct led_classdev *ldev) ++{ ++ struct qca8k_led *led = container_of(ldev, struct qca8k_led, cdev); ++ struct qca8k_priv *priv = led->priv; ++ struct dsa_port *dp; ++ ++ dp = dsa_to_port(priv->ds, qca8k_phy_to_port(led->port_num)); ++ if (!dp) ++ return NULL; ++ if (dp->slave) ++ return &dp->slave->dev; ++ return NULL; ++} ++ + static int + qca8k_parse_port_leds(struct qca8k_priv *priv, struct fwnode_handle *port, int port_num) + { +@@ -377,6 +403,7 @@ qca8k_parse_port_leds(struct qca8k_priv + port_led->cdev.hw_control_is_supported = qca8k_cled_hw_control_is_supported; + port_led->cdev.hw_control_set = qca8k_cled_hw_control_set; + port_led->cdev.hw_control_get = qca8k_cled_hw_control_get; ++ port_led->cdev.hw_control_get_device = qca8k_cled_hw_control_get_device; + port_led->cdev.hw_control_trigger = "netdev"; + init_data.default_label = ":port"; + init_data.fwnode = led; diff --git a/target/linux/generic/config-5.15 b/target/linux/generic/config-5.15 index 340175f00d..5ca1ff0833 100644 --- a/target/linux/generic/config-5.15 +++ b/target/linux/generic/config-5.15 @@ -4064,6 +4064,7 @@ CONFIG_NET_CORE=y # CONFIG_NET_DSA_MV88E6XXX_NEED_PPU is not set # CONFIG_NET_DSA_MV88E6XXX_PTP is not set # CONFIG_NET_DSA_QCA8K is not set +# CONFIG_NET_DSA_QCA8K_LEDS_SUPPORT is not set # CONFIG_NET_DSA_REALTEK_SMI is not set # CONFIG_NET_DSA_SJA1105 is not set # CONFIG_NET_DSA_SMSC_LAN9303_I2C is not set diff --git a/target/linux/generic/config-6.1 b/target/linux/generic/config-6.1 index 18d4ec0bd8..d36fe5e893 100644 --- a/target/linux/generic/config-6.1 +++ b/target/linux/generic/config-6.1 @@ -4188,6 +4188,7 @@ CONFIG_NET_CORE=y # CONFIG_NET_DSA_MV88E6XXX_NEED_PPU is not set # CONFIG_NET_DSA_MV88E6XXX_PTP is not set # CONFIG_NET_DSA_QCA8K is not set +# CONFIG_NET_DSA_QCA8K_LEDS_SUPPORT is not set # CONFIG_NET_DSA_REALTEK is not set # CONFIG_NET_DSA_REALTEK_SMI is not set # CONFIG_NET_DSA_SJA1105 is not set diff --git a/target/linux/generic/hack-5.15/700-swconfig_switch_drivers.patch b/target/linux/generic/hack-5.15/700-swconfig_switch_drivers.patch index 48be440025..9d77efaca6 100644 --- a/target/linux/generic/hack-5.15/700-swconfig_switch_drivers.patch +++ b/target/linux/generic/hack-5.15/700-swconfig_switch_drivers.patch @@ -12,7 +12,7 @@ Signed-off-by: Felix Fietkau --- a/drivers/net/phy/Kconfig +++ b/drivers/net/phy/Kconfig -@@ -61,6 +61,80 @@ config SFP +@@ -62,6 +62,80 @@ config SFP depends on HWMON || HWMON=n select MDIO_I2C diff --git a/target/linux/generic/hack-6.1/700-swconfig_switch_drivers.patch b/target/linux/generic/hack-6.1/700-swconfig_switch_drivers.patch index 48be440025..9d77efaca6 100644 --- a/target/linux/generic/hack-6.1/700-swconfig_switch_drivers.patch +++ b/target/linux/generic/hack-6.1/700-swconfig_switch_drivers.patch @@ -12,7 +12,7 @@ Signed-off-by: Felix Fietkau --- a/drivers/net/phy/Kconfig +++ b/drivers/net/phy/Kconfig -@@ -61,6 +61,80 @@ config SFP +@@ -62,6 +62,80 @@ config SFP depends on HWMON || HWMON=n select MDIO_I2C diff --git a/target/linux/generic/pending-5.15/703-phy-add-detach-callback-to-struct-phy_driver.patch b/target/linux/generic/pending-5.15/703-phy-add-detach-callback-to-struct-phy_driver.patch index 5baccf73cb..83587b5c93 100644 --- a/target/linux/generic/pending-5.15/703-phy-add-detach-callback-to-struct-phy_driver.patch +++ b/target/linux/generic/pending-5.15/703-phy-add-detach-callback-to-struct-phy_driver.patch @@ -11,7 +11,7 @@ Signed-off-by: Gabor Juhos --- a/drivers/net/phy/phy_device.c +++ b/drivers/net/phy/phy_device.c -@@ -1748,6 +1748,9 @@ void phy_detach(struct phy_device *phyde +@@ -1751,6 +1751,9 @@ void phy_detach(struct phy_device *phyde struct module *ndev_owner = NULL; struct mii_bus *bus; @@ -23,7 +23,7 @@ Signed-off-by: Gabor Juhos sysfs_remove_link(&dev->dev.kobj, "phydev"); --- a/include/linux/phy.h +++ b/include/linux/phy.h -@@ -823,6 +823,12 @@ struct phy_driver { +@@ -843,6 +843,12 @@ struct phy_driver { /** @handle_interrupt: Override default interrupt handling */ irqreturn_t (*handle_interrupt)(struct phy_device *phydev); diff --git a/target/linux/generic/pending-6.1/703-phy-add-detach-callback-to-struct-phy_driver.patch b/target/linux/generic/pending-6.1/703-phy-add-detach-callback-to-struct-phy_driver.patch index 48b1afe3f2..8d2803158e 100644 --- a/target/linux/generic/pending-6.1/703-phy-add-detach-callback-to-struct-phy_driver.patch +++ b/target/linux/generic/pending-6.1/703-phy-add-detach-callback-to-struct-phy_driver.patch @@ -11,7 +11,7 @@ Signed-off-by: Gabor Juhos --- a/drivers/net/phy/phy_device.c +++ b/drivers/net/phy/phy_device.c -@@ -1750,6 +1750,9 @@ void phy_detach(struct phy_device *phyde +@@ -1753,6 +1753,9 @@ void phy_detach(struct phy_device *phyde struct module *ndev_owner = NULL; struct mii_bus *bus; @@ -23,7 +23,7 @@ Signed-off-by: Gabor Juhos sysfs_remove_link(&dev->dev.kobj, "phydev"); --- a/include/linux/phy.h +++ b/include/linux/phy.h -@@ -858,6 +858,12 @@ struct phy_driver { +@@ -878,6 +878,12 @@ struct phy_driver { /** @handle_interrupt: Override default interrupt handling */ irqreturn_t (*handle_interrupt)(struct phy_device *phydev); diff --git a/target/linux/ipq40xx/patches-5.15/704-net-phy-define-PSGMII-PHY-interface-mode.patch b/target/linux/ipq40xx/patches-5.15/704-net-phy-define-PSGMII-PHY-interface-mode.patch index faac6fa145..7fbf38a7e3 100644 --- a/target/linux/ipq40xx/patches-5.15/704-net-phy-define-PSGMII-PHY-interface-mode.patch +++ b/target/linux/ipq40xx/patches-5.15/704-net-phy-define-PSGMII-PHY-interface-mode.patch @@ -50,7 +50,7 @@ Signed-off-by: Gabor Juhos phylink_set(pl->supported, 10baseT_Full); --- a/include/linux/phy.h +++ b/include/linux/phy.h -@@ -138,6 +138,7 @@ typedef enum { +@@ -139,6 +139,7 @@ typedef enum { PHY_INTERFACE_MODE_XGMII, PHY_INTERFACE_MODE_XLGMII, PHY_INTERFACE_MODE_MOCA, @@ -58,7 +58,7 @@ Signed-off-by: Gabor Juhos PHY_INTERFACE_MODE_QSGMII, PHY_INTERFACE_MODE_TRGMII, PHY_INTERFACE_MODE_100BASEX, -@@ -243,6 +244,8 @@ static inline const char *phy_modes(phy_ +@@ -244,6 +245,8 @@ static inline const char *phy_modes(phy_ return "xlgmii"; case PHY_INTERFACE_MODE_MOCA: return "moca"; diff --git a/target/linux/ipq40xx/patches-5.15/705-net-dsa-add-Qualcomm-IPQ4019-built-in-switch-support.patch b/target/linux/ipq40xx/patches-5.15/705-net-dsa-add-Qualcomm-IPQ4019-built-in-switch-support.patch index d75b5e514d..13b169e576 100644 --- a/target/linux/ipq40xx/patches-5.15/705-net-dsa-add-Qualcomm-IPQ4019-built-in-switch-support.patch +++ b/target/linux/ipq40xx/patches-5.15/705-net-dsa-add-Qualcomm-IPQ4019-built-in-switch-support.patch @@ -32,10 +32,10 @@ Signed-off-by: Robert Marko --- a/drivers/net/dsa/qca/Kconfig +++ b/drivers/net/dsa/qca/Kconfig -@@ -15,3 +15,13 @@ config NET_DSA_QCA8K +@@ -23,3 +23,13 @@ config NET_DSA_QCA8K_LEDS_SUPPORT help - This enables support for the Qualcomm Atheros QCA8K Ethernet - switch chips. + This enabled support for LEDs present on the Qualcomm Atheros + QCA8K Ethernet switch chips. + +config NET_DSA_QCA8K_IPQ4019 + tristate "Qualcomm Atheros IPQ4019 built-in Ethernet switch support" @@ -48,9 +48,10 @@ Signed-off-by: Robert Marko + --- a/drivers/net/dsa/qca/Makefile +++ b/drivers/net/dsa/qca/Makefile -@@ -1,4 +1,5 @@ +@@ -1,5 +1,6 @@ # SPDX-License-Identifier: GPL-2.0-only obj-$(CONFIG_NET_DSA_AR9331) += ar9331.o +obj-$(CONFIG_NET_DSA_QCA8K_IPQ4019) += qca8k-ipq4019.o obj-$(CONFIG_NET_DSA_QCA8K) += qca8k.o qca8k-y += qca8k-common.o qca8k-8xxx.o + ifdef CONFIG_NET_DSA_QCA8K_LEDS_SUPPORT diff --git a/target/linux/ipq40xx/patches-5.15/708-net-phy-Add-Qualcom-QCA807x-driver.patch b/target/linux/ipq40xx/patches-5.15/708-net-phy-Add-Qualcom-QCA807x-driver.patch index 87be5980c4..6a92a103d6 100644 --- a/target/linux/ipq40xx/patches-5.15/708-net-phy-Add-Qualcom-QCA807x-driver.patch +++ b/target/linux/ipq40xx/patches-5.15/708-net-phy-Add-Qualcom-QCA807x-driver.patch @@ -25,7 +25,7 @@ Signed-off-by: Robert Marko --- a/drivers/net/phy/Kconfig +++ b/drivers/net/phy/Kconfig -@@ -346,6 +346,12 @@ config AT803X_PHY +@@ -347,6 +347,12 @@ config AT803X_PHY Currently supports the AR8030, AR8031, AR8033, AR8035 and internal QCA8337(Internal qca8k PHY) model diff --git a/target/linux/ipq806x/config-5.15 b/target/linux/ipq806x/config-5.15 index 286f327e39..902da14813 100644 --- a/target/linux/ipq806x/config-5.15 +++ b/target/linux/ipq806x/config-5.15 @@ -287,6 +287,7 @@ CONFIG_NEON=y CONFIG_NET_DEVLINK=y CONFIG_NET_DSA=y CONFIG_NET_DSA_QCA8K=y +CONFIG_NET_DSA_QCA8K_LEDS_SUPPORT=y CONFIG_NET_DSA_TAG_QCA=y CONFIG_NET_FLOW_LIMIT=y CONFIG_NET_PTP_CLASSIFY=y diff --git a/target/linux/ipq806x/config-6.1 b/target/linux/ipq806x/config-6.1 index 4f8c3c88df..02d310653b 100644 --- a/target/linux/ipq806x/config-6.1 +++ b/target/linux/ipq806x/config-6.1 @@ -294,6 +294,7 @@ CONFIG_NEON=y CONFIG_NET_DEVLINK=y CONFIG_NET_DSA=y CONFIG_NET_DSA_QCA8K=y +CONFIG_NET_DSA_QCA8K_LEDS_SUPPORT=y CONFIG_NET_DSA_TAG_QCA=y CONFIG_NET_FLOW_LIMIT=y CONFIG_NET_PTP_CLASSIFY=y diff --git a/target/linux/layerscape/patches-5.15/702-phy-Add-2.5G-SGMII-interface-mode.patch b/target/linux/layerscape/patches-5.15/702-phy-Add-2.5G-SGMII-interface-mode.patch index 4a78bfe955..30fc56e618 100644 --- a/target/linux/layerscape/patches-5.15/702-phy-Add-2.5G-SGMII-interface-mode.patch +++ b/target/linux/layerscape/patches-5.15/702-phy-Add-2.5G-SGMII-interface-mode.patch @@ -34,7 +34,7 @@ Signed-off-by: Bhaskar Upadhaya break; --- a/include/linux/phy.h +++ b/include/linux/phy.h -@@ -152,6 +152,7 @@ typedef enum { +@@ -153,6 +153,7 @@ typedef enum { PHY_INTERFACE_MODE_USXGMII, /* 10GBASE-KR - with Clause 73 AN */ PHY_INTERFACE_MODE_10GKR, @@ -42,7 +42,7 @@ Signed-off-by: Bhaskar Upadhaya PHY_INTERFACE_MODE_MAX, } phy_interface_t; -@@ -267,6 +268,8 @@ static inline const char *phy_modes(phy_ +@@ -268,6 +269,8 @@ static inline const char *phy_modes(phy_ return "10gbase-kr"; case PHY_INTERFACE_MODE_100BASEX: return "100base-x"; diff --git a/target/linux/mediatek/patches-5.15/500-gsw-rtl8367s-mt7622-support.patch b/target/linux/mediatek/patches-5.15/500-gsw-rtl8367s-mt7622-support.patch index 262df9d2cf..b8964f4e76 100644 --- a/target/linux/mediatek/patches-5.15/500-gsw-rtl8367s-mt7622-support.patch +++ b/target/linux/mediatek/patches-5.15/500-gsw-rtl8367s-mt7622-support.patch @@ -1,6 +1,6 @@ --- a/drivers/net/phy/Kconfig +++ b/drivers/net/phy/Kconfig -@@ -366,6 +366,12 @@ config ROCKCHIP_PHY +@@ -367,6 +367,12 @@ config ROCKCHIP_PHY help Currently supports the integrated Ethernet PHY. diff --git a/target/linux/mediatek/patches-5.15/730-net-phy-add-driver-for-MediaTek-SoC-built-in-GE-PHYs.patch b/target/linux/mediatek/patches-5.15/730-net-phy-add-driver-for-MediaTek-SoC-built-in-GE-PHYs.patch index b8d1a60619..6af9e84335 100644 --- a/target/linux/mediatek/patches-5.15/730-net-phy-add-driver-for-MediaTek-SoC-built-in-GE-PHYs.patch +++ b/target/linux/mediatek/patches-5.15/730-net-phy-add-driver-for-MediaTek-SoC-built-in-GE-PHYs.patch @@ -39,7 +39,7 @@ Signed-off-by: Daniel Golle L: linux-i2c@vger.kernel.org --- a/drivers/net/phy/Kconfig +++ b/drivers/net/phy/Kconfig -@@ -292,6 +292,18 @@ config MEDIATEK_GE_PHY +@@ -293,6 +293,18 @@ config MEDIATEK_GE_PHY help Supports the MediaTek Gigabit Ethernet PHYs. diff --git a/target/linux/mediatek/patches-5.15/732-net-phy-add-driver-for-MediaTek-2.5G-PHY.patch b/target/linux/mediatek/patches-5.15/732-net-phy-add-driver-for-MediaTek-2.5G-PHY.patch index a2a3bab632..7151eb35cc 100644 --- a/target/linux/mediatek/patches-5.15/732-net-phy-add-driver-for-MediaTek-2.5G-PHY.patch +++ b/target/linux/mediatek/patches-5.15/732-net-phy-add-driver-for-MediaTek-2.5G-PHY.patch @@ -13,7 +13,7 @@ Signed-off-by: Daniel Golle --- a/drivers/net/phy/Kconfig +++ b/drivers/net/phy/Kconfig -@@ -304,6 +304,13 @@ config MEDIATEK_GE_SOC_PHY +@@ -305,6 +305,13 @@ config MEDIATEK_GE_SOC_PHY present in the SoCs efuse and will dynamically calibrate VCM (common-mode voltage) during startup. diff --git a/target/linux/mpc85xx/p1010/config-default b/target/linux/mpc85xx/p1010/config-default index b6d483cd80..f00fb4d5fd 100644 --- a/target/linux/mpc85xx/p1010/config-default +++ b/target/linux/mpc85xx/p1010/config-default @@ -17,6 +17,7 @@ CONFIG_MTD_UBI_WL_THRESHOLD=4096 CONFIG_NET_DEVLINK=y CONFIG_NET_DSA=y CONFIG_NET_DSA_QCA8K=y +CONFIG_NET_DSA_QCA8K_LEDS_SUPPORT=y CONFIG_NET_DSA_TAG_QCA=y CONFIG_NET_SWITCHDEV=y CONFIG_PHYLINK=y diff --git a/target/linux/ramips/patches-5.15/720-Revert-net-phy-simplify-phy_link_change-arguments.patch b/target/linux/ramips/patches-5.15/720-Revert-net-phy-simplify-phy_link_change-arguments.patch index 204756b751..87f319abb5 100644 --- a/target/linux/ramips/patches-5.15/720-Revert-net-phy-simplify-phy_link_change-arguments.patch +++ b/target/linux/ramips/patches-5.15/720-Revert-net-phy-simplify-phy_link_change-arguments.patch @@ -71,7 +71,7 @@ still required by target/linux/ramips/files/drivers/net/ethernet/ralink/mdio.c break; --- a/drivers/net/phy/phy_device.c +++ b/drivers/net/phy/phy_device.c -@@ -1032,14 +1032,16 @@ struct phy_device *phy_find_first(struct +@@ -1035,14 +1035,16 @@ struct phy_device *phy_find_first(struct } EXPORT_SYMBOL(phy_find_first); @@ -107,7 +107,7 @@ still required by target/linux/ramips/files/drivers/net/ethernet/ralink/mdio.c bool tx_pause, rx_pause; --- a/include/linux/phy.h +++ b/include/linux/phy.h -@@ -703,7 +703,7 @@ struct phy_device { +@@ -706,7 +706,7 @@ struct phy_device { u8 mdix; u8 mdix_ctrl; diff --git a/target/linux/ramips/patches-5.15/721-NET-no-auto-carrier-off-support.patch b/target/linux/ramips/patches-5.15/721-NET-no-auto-carrier-off-support.patch index d80877b41f..5205a8f936 100644 --- a/target/linux/ramips/patches-5.15/721-NET-no-auto-carrier-off-support.patch +++ b/target/linux/ramips/patches-5.15/721-NET-no-auto-carrier-off-support.patch @@ -37,7 +37,7 @@ Signed-off-by: John Crispin break; --- a/include/linux/phy.h +++ b/include/linux/phy.h -@@ -620,6 +620,7 @@ struct phy_device { +@@ -622,6 +622,7 @@ struct phy_device { unsigned downshifted_rate:1; unsigned is_on_sfp_module:1; unsigned mac_managed_pm:1; diff --git a/target/linux/realtek/patches-5.15/703-include-linux-add-phy-ops-for-rtl838x.patch b/target/linux/realtek/patches-5.15/703-include-linux-add-phy-ops-for-rtl838x.patch index c4594980a9..04a110a233 100644 --- a/target/linux/realtek/patches-5.15/703-include-linux-add-phy-ops-for-rtl838x.patch +++ b/target/linux/realtek/patches-5.15/703-include-linux-add-phy-ops-for-rtl838x.patch @@ -21,10 +21,10 @@ Submitted-by: John Crispin --- a/include/linux/phy.h +++ b/include/linux/phy.h -@@ -943,6 +943,10 @@ struct phy_driver { - int (*get_sqi)(struct phy_device *dev); - /** @get_sqi_max: Get the maximum signal quality indication */ - int (*get_sqi_max)(struct phy_device *dev); +@@ -984,6 +984,10 @@ struct phy_driver { + int (*led_blink_set)(struct phy_device *dev, u8 index, + unsigned long *delay_on, + unsigned long *delay_off); + int (*get_port)(struct phy_device *dev); + int (*set_port)(struct phy_device *dev, int port); + int (*get_eee)(struct phy_device *dev, struct ethtool_eee *e); diff --git a/target/linux/realtek/patches-5.15/704-include-linux-add-phy-hsgmii-mode.patch b/target/linux/realtek/patches-5.15/704-include-linux-add-phy-hsgmii-mode.patch index 1dd328b34e..f9411e47d3 100644 --- a/target/linux/realtek/patches-5.15/704-include-linux-add-phy-hsgmii-mode.patch +++ b/target/linux/realtek/patches-5.15/704-include-linux-add-phy-hsgmii-mode.patch @@ -33,7 +33,7 @@ Submitted-by: Birger Koblitz phylink_set(pl->supported, 10baseT_Full); --- a/include/linux/phy.h +++ b/include/linux/phy.h -@@ -138,6 +138,7 @@ typedef enum { +@@ -139,6 +139,7 @@ typedef enum { PHY_INTERFACE_MODE_XGMII, PHY_INTERFACE_MODE_XLGMII, PHY_INTERFACE_MODE_MOCA, @@ -41,7 +41,7 @@ Submitted-by: Birger Koblitz PHY_INTERFACE_MODE_QSGMII, PHY_INTERFACE_MODE_TRGMII, PHY_INTERFACE_MODE_100BASEX, -@@ -243,6 +244,8 @@ static inline const char *phy_modes(phy_ +@@ -244,6 +245,8 @@ static inline const char *phy_modes(phy_ return "xlgmii"; case PHY_INTERFACE_MODE_MOCA: return "moca"; diff --git a/target/linux/realtek/patches-5.15/705-add-rtl-phy.patch b/target/linux/realtek/patches-5.15/705-add-rtl-phy.patch index cb80a72fe2..98c5e714b1 100644 --- a/target/linux/realtek/patches-5.15/705-add-rtl-phy.patch +++ b/target/linux/realtek/patches-5.15/705-add-rtl-phy.patch @@ -14,7 +14,7 @@ Submitted-by: Birger Koblitz --- a/drivers/net/phy/Kconfig +++ b/drivers/net/phy/Kconfig -@@ -356,6 +356,12 @@ config REALTEK_PHY +@@ -357,6 +357,12 @@ config REALTEK_PHY help Supports the Realtek 821x PHY. diff --git a/target/linux/realtek/patches-5.15/705-include-linux-phy-increase-phy-address-number-for-rtl839x.patch b/target/linux/realtek/patches-5.15/705-include-linux-phy-increase-phy-address-number-for-rtl839x.patch index 3c273dca66..56ce80bb20 100644 --- a/target/linux/realtek/patches-5.15/705-include-linux-phy-increase-phy-address-number-for-rtl839x.patch +++ b/target/linux/realtek/patches-5.15/705-include-linux-phy-increase-phy-address-number-for-rtl839x.patch @@ -21,7 +21,7 @@ Submitted-by: John Crispin --- a/include/linux/phy.h +++ b/include/linux/phy.h -@@ -279,7 +279,7 @@ static inline const char *phy_modes(phy_ +@@ -280,7 +280,7 @@ static inline const char *phy_modes(phy_ #define PHY_INIT_TIMEOUT 100000 #define PHY_FORCE_TIMEOUT 10 diff --git a/target/linux/realtek/patches-5.15/711-net-phy-add-an-MDIO-SMBus-library.patch b/target/linux/realtek/patches-5.15/711-net-phy-add-an-MDIO-SMBus-library.patch index 4d851d05bd..767a5d8ec5 100644 --- a/target/linux/realtek/patches-5.15/711-net-phy-add-an-MDIO-SMBus-library.patch +++ b/target/linux/realtek/patches-5.15/711-net-phy-add-an-MDIO-SMBus-library.patch @@ -110,7 +110,7 @@ Signed-off-by: Antoine Tenart +MODULE_LICENSE("GPL"); --- a/drivers/net/phy/Kconfig +++ b/drivers/net/phy/Kconfig -@@ -60,6 +60,7 @@ config SFP +@@ -61,6 +61,7 @@ config SFP depends on I2C && PHYLINK depends on HWMON || HWMON=n select MDIO_I2C diff --git a/target/linux/realtek/patches-5.15/800-net-mdio-support-hardware-assisted-indirect-access.patch b/target/linux/realtek/patches-5.15/800-net-mdio-support-hardware-assisted-indirect-access.patch index b31c5e78ac..b0a8fadb5f 100644 --- a/target/linux/realtek/patches-5.15/800-net-mdio-support-hardware-assisted-indirect-access.patch +++ b/target/linux/realtek/patches-5.15/800-net-mdio-support-hardware-assisted-indirect-access.patch @@ -657,7 +657,7 @@ Signed-off-by: Daniel Golle { --- a/include/linux/phy.h +++ b/include/linux/phy.h -@@ -80,6 +80,7 @@ extern const int phy_10gbit_features_arr +@@ -81,6 +81,7 @@ extern const int phy_10gbit_features_arr #define PHY_IS_INTERNAL 0x00000001 #define PHY_RST_AFTER_CLK_EN 0x00000002 #define PHY_POLL_CABLE_TEST 0x00000004 @@ -665,7 +665,7 @@ Signed-off-by: Daniel Golle #define MDIO_DEVICE_IS_PHY 0x80000000 /** -@@ -420,6 +421,22 @@ struct mii_bus { +@@ -421,6 +422,22 @@ struct mii_bus { /** @shared: shared state across different PHYs */ struct phy_package_shared *shared[PHY_MAX_ADDR]; @@ -688,7 +688,7 @@ Signed-off-by: Daniel Golle }; #define to_mii_bus(d) container_of(d, struct mii_bus, dev) -@@ -1754,6 +1771,66 @@ static inline int __phy_package_read(str +@@ -1795,6 +1812,66 @@ static inline int __phy_package_read(str return __mdiobus_read(phydev->mdio.bus, shared->addr, regnum); } @@ -755,7 +755,7 @@ Signed-off-by: Daniel Golle static inline int phy_package_write(struct phy_device *phydev, u32 regnum, u16 val) { -@@ -1776,6 +1853,72 @@ static inline int __phy_package_write(st +@@ -1817,6 +1894,72 @@ static inline int __phy_package_write(st return __mdiobus_write(phydev->mdio.bus, shared->addr, regnum, val); }