From: Mauro Carvalho Chehab Date: Tue, 17 Jul 2007 19:25:38 +0000 (-0300) Subject: V4L/DVB (5858): Use msecs_to_jiffies instead of HZ on media/video I2C drivers X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=09df5cbe46511611410274f09571ada229231ddb;p=openwrt%2Fstaging%2Fblogic.git V4L/DVB (5858): Use msecs_to_jiffies instead of HZ on media/video I2C drivers Signed-off-by: Mauro Carvalho Chehab --- diff --git a/drivers/media/video/bt866.c b/drivers/media/video/bt866.c index 2e4cf1efdd21..b767b098d14b 100644 --- a/drivers/media/video/bt866.c +++ b/drivers/media/video/bt866.c @@ -257,7 +257,7 @@ static int bt866_write(struct bt866 *encoder, printk(KERN_WARNING "%s: I/O error #%d " "(write 0x%02x/0x%02x)\n", encoder->i2c->name, err, encoder->addr, subaddr); - schedule_timeout_interruptible(HZ/10); + schedule_timeout_interruptible(msecs_to_jiffies(100)); } if (err == 3) { printk(KERN_WARNING "%s: giving up\n", diff --git a/drivers/media/video/saa5249.c b/drivers/media/video/saa5249.c index f2a2f34cd626..17f1e2e9a66b 100644 --- a/drivers/media/video/saa5249.c +++ b/drivers/media/video/saa5249.c @@ -86,9 +86,9 @@ static const int disp_modes[8][3] = -#define PAGE_WAIT (300*HZ/1000) /* Time between requesting page and */ +#define PAGE_WAIT msecs_to_jiffies(300) /* Time between requesting page and */ /* checking status bits */ -#define PGBUF_EXPIRE (15*HZ) /* Time to wait before retransmitting */ +#define PGBUF_EXPIRE msecs_to_jiffies(15000) /* Time to wait before retransmitting */ /* page regardless of infobits */ typedef struct { u8 pgbuf[VTX_VIRTUALSIZE]; /* Page-buffer */ @@ -115,8 +115,8 @@ struct saa5249_device #define CCTWR 34 /* I²C write/read-address of vtx-chip */ #define CCTRD 35 #define NOACK_REPEAT 10 /* Retry access this many times on failure */ -#define CLEAR_DELAY (HZ/20) /* Time required to clear a page */ -#define READY_TIMEOUT (30*HZ/1000) /* Time to wait for ready signal of I²C-bus interface */ +#define CLEAR_DELAY msecs_to_jiffies(50) /* Time required to clear a page */ +#define READY_TIMEOUT msecs_to_jiffies(30) /* Time to wait for ready signal of I2C-bus interface */ #define INIT_DELAY 500 /* Time in usec to wait at initialization of CEA interface */ #define START_DELAY 10 /* Time in usec to wait before starting write-cycle (CEA) */ diff --git a/drivers/media/video/saa7110.c b/drivers/media/video/saa7110.c index 676b9970eb2e..061134a7ba9f 100644 --- a/drivers/media/video/saa7110.c +++ b/drivers/media/video/saa7110.c @@ -208,7 +208,7 @@ determine_norm (struct i2c_client *client) saa7110_write_block(client, initseq, sizeof(initseq)); saa7110_selmux(client, decoder->input); prepare_to_wait(&decoder->wq, &wait, TASK_UNINTERRUPTIBLE); - schedule_timeout(HZ/4); + schedule_timeout(msecs_to_jiffies(250)); finish_wait(&decoder->wq, &wait); status = saa7110_read(client); if (status & 0x40) { @@ -249,7 +249,7 @@ determine_norm (struct i2c_client *client) //saa7110_write(client,0x2E,0x9A); prepare_to_wait(&decoder->wq, &wait, TASK_UNINTERRUPTIBLE); - schedule_timeout(HZ/4); + schedule_timeout(msecs_to_jiffies(250)); finish_wait(&decoder->wq, &wait); status = saa7110_read(client); diff --git a/drivers/media/video/tvaudio.c b/drivers/media/video/tvaudio.c index 9da338dc4f3b..cffb011590e3 100644 --- a/drivers/media/video/tvaudio.c +++ b/drivers/media/video/tvaudio.c @@ -290,7 +290,7 @@ static int chip_thread(void *data) desc->checkmode(chip); /* schedule next check */ - mod_timer(&chip->wt, jiffies+2*HZ); + mod_timer(&chip->wt, jiffies+msecs_to_jiffies(2000)); } v4l_dbg(1, debug, &chip->c, "%s: thread exiting\n", chip->c.name); @@ -1770,7 +1770,7 @@ static int chip_command(struct i2c_client *client, desc->setmode(chip,VIDEO_SOUND_MONO); if (chip->prevmode != VIDEO_SOUND_MONO) chip->prevmode = -1; /* reset previous mode */ - mod_timer(&chip->wt, jiffies+2*HZ); + mod_timer(&chip->wt, jiffies+msecs_to_jiffies(2000)); /* the thread will call checkmode() later */ } break;