From: Mauro Carvalho Chehab Date: Tue, 22 Jan 2013 15:28:31 +0000 (-0300) Subject: [media] mb86a20s: calculate statistics at .read_status() X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=09b6d21e100a8dcda7cf5a32ecd52e8008094f72;p=openwrt%2Fstaging%2Fblogic.git [media] mb86a20s: calculate statistics at .read_status() Instead of providing separate callbacks to read the several FE stats properties, the better seems to use just one method that will: - Read lock status; - Read signal strength; - if locked, get TMCC data; - if locked, get DVB statistics. As the DVB frontend thread will call this read_status callback on every 3 seconds, and userspace can even call it earlier, all stats data and layers layout will be updated together if available, with is a good thing. Reviewed-by: Antti Palosaari Signed-off-by: Mauro Carvalho Chehab --- diff --git a/drivers/media/dvb-frontends/mb86a20s.c b/drivers/media/dvb-frontends/mb86a20s.c index 4b3ffc418294..d7668e6292a0 100644 --- a/drivers/media/dvb-frontends/mb86a20s.c +++ b/drivers/media/dvb-frontends/mb86a20s.c @@ -27,6 +27,7 @@ MODULE_PARM_DESC(debug, "Activates frontend debugging (default:0)"); struct mb86a20s_state { struct i2c_adapter *i2c; const struct mb86a20s_config *config; + u32 last_frequency; struct dvb_frontend frontend; @@ -80,17 +81,26 @@ static struct regdata mb86a20s_init[] = { { 0x04, 0x13 }, { 0x05, 0xff }, { 0x04, 0x15 }, { 0x05, 0x4e }, { 0x04, 0x16 }, { 0x05, 0x20 }, - { 0x52, 0x01 }, - { 0x50, 0xa7 }, { 0x51, 0xff }, + + /* + * On this demod, when the bit count reaches the count below, + * it collects the bit error count. The bit counters are initialized + * to 65535 here. This warrants that all of them will be quickly + * calculated when device gets locked. As TMCC is parsed, the values + * can be adjusted later in the driver's code. + */ + { 0x52, 0x01 }, /* Turn on BER before Viterbi */ + { 0x50, 0xa7 }, { 0x51, 0x00 }, { 0x50, 0xa8 }, { 0x51, 0xff }, { 0x50, 0xa9 }, { 0x51, 0xff }, - { 0x50, 0xaa }, { 0x51, 0xff }, + { 0x50, 0xaa }, { 0x51, 0x00 }, { 0x50, 0xab }, { 0x51, 0xff }, { 0x50, 0xac }, { 0x51, 0xff }, - { 0x50, 0xad }, { 0x51, 0xff }, + { 0x50, 0xad }, { 0x51, 0x00 }, { 0x50, 0xae }, { 0x51, 0xff }, { 0x50, 0xaf }, { 0x51, 0xff }, - { 0x5e, 0x07 }, + + { 0x5e, 0x00 }, /* Turn off BER after Viterbi */ { 0x50, 0xdc }, { 0x51, 0x01 }, { 0x50, 0xdd }, { 0x51, 0xf4 }, { 0x50, 0xde }, { 0x51, 0x01 }, @@ -105,8 +115,8 @@ static struct regdata mb86a20s_init[] = { { 0x50, 0xb6 }, { 0x51, 0xff }, { 0x50, 0xb7 }, { 0x51, 0xff }, { 0x50, 0x50 }, { 0x51, 0x02 }, - { 0x50, 0x51 }, { 0x51, 0x04 }, - { 0x45, 0x04 }, + { 0x50, 0x51 }, { 0x51, 0x04 }, /* MER symbol 4 */ + { 0x45, 0x04 }, /* CN symbol 4 */ { 0x48, 0x04 }, { 0x50, 0xd5 }, { 0x51, 0x01 }, /* Serial */ { 0x50, 0xd6 }, { 0x51, 0x1f }, @@ -163,12 +173,23 @@ static struct regdata mb86a20s_reset_reception[] = { { 0x08, 0x00 }, }; +static struct regdata mb86a20s_vber_reset[] = { + { 0x53, 0x00 }, /* VBER Counter reset */ + { 0x53, 0x07 }, +}; + +static struct regdata mb86a20s_per_reset[] = { + { 0x50, 0xb1 }, /* PER Counter reset */ + { 0x51, 0x07 }, + { 0x51, 0x00 }, +}; + /* * I2C read/write functions and macros */ static int mb86a20s_i2c_writereg(struct mb86a20s_state *state, - u8 i2c_addr, int reg, int data) + u8 i2c_addr, u8 reg, u8 data) { u8 buf[] = { reg, data }; struct i2c_msg msg = { @@ -230,6 +251,12 @@ static int mb86a20s_i2c_readreg(struct mb86a20s_state *state, mb86a20s_i2c_writeregdata(state, state->config->demod_address, \ regdata, ARRAY_SIZE(regdata)) +/* + * Ancillary internal routines (likely compiled inlined) + * + * The functions below assume that gateway lock has already obtained + */ + static int mb86a20s_read_status(struct dvb_frontend *fe, fe_status_t *status) { struct mb86a20s_state *state = fe->demodulator_priv; @@ -262,42 +289,49 @@ static int mb86a20s_read_status(struct dvb_frontend *fe, fe_status_t *status) return 0; } -static int mb86a20s_read_signal_strength(struct dvb_frontend *fe, u16 *strength) +static int mb86a20s_read_signal_strength(struct dvb_frontend *fe) { struct mb86a20s_state *state = fe->demodulator_priv; + int rc; unsigned rf_max, rf_min, rf; - u8 val; - - if (fe->ops.i2c_gate_ctrl) - fe->ops.i2c_gate_ctrl(fe, 0); /* Does a binary search to get RF strength */ rf_max = 0xfff; rf_min = 0; do { rf = (rf_max + rf_min) / 2; - mb86a20s_writereg(state, 0x04, 0x1f); - mb86a20s_writereg(state, 0x05, rf >> 8); - mb86a20s_writereg(state, 0x04, 0x20); - mb86a20s_writereg(state, 0x04, rf); + rc = mb86a20s_writereg(state, 0x04, 0x1f); + if (rc < 0) + return rc; + rc = mb86a20s_writereg(state, 0x05, rf >> 8); + if (rc < 0) + return rc; + rc = mb86a20s_writereg(state, 0x04, 0x20); + if (rc < 0) + return rc; + rc = mb86a20s_writereg(state, 0x04, rf); + if (rc < 0) + return rc; - val = mb86a20s_readreg(state, 0x02); - if (val & 0x08) + rc = mb86a20s_readreg(state, 0x02); + if (rc < 0) + return rc; + if (rc & 0x08) rf_min = (rf_max + rf_min) / 2; else rf_max = (rf_max + rf_min) / 2; if (rf_max - rf_min < 4) { - *strength = (((rf_max + rf_min) / 2) * 65535) / 4095; + rf = (rf_max + rf_min) / 2; + + /* Rescale it from 2^12 (4096) to 2^16 */ + rf <<= (16 - 12); dev_dbg(&state->i2c->dev, "%s: signal strength = %d (%d < RF=%d < %d)\n", __func__, rf, rf_min, rf >> 4, rf_max); - break; + return rf; } } while (1); - if (fe->ops.i2c_gate_ctrl) - fe->ops.i2c_gate_ctrl(fe, 1); - return 0; } @@ -462,9 +496,6 @@ static int mb86a20s_get_frontend(struct dvb_frontend *fe) /* Reset frontend cache to default values */ mb86a20s_reset_frontend_cache(fe); - if (fe->ops.i2c_gate_ctrl) - fe->ops.i2c_gate_ctrl(fe, 0); - /* Check for partial reception */ rc = mb86a20s_writereg(state, 0x6d, 0x85); if (rc < 0) @@ -550,15 +581,119 @@ static int mb86a20s_get_frontend(struct dvb_frontend *fe) break; } } + return 0; noperlayer_error: - if (fe->ops.i2c_gate_ctrl) - fe->ops.i2c_gate_ctrl(fe, 1); + /* per-layer info is incomplete; discard all per-layer */ + c->isdbt_layer_enabled = 0; + + return rc; +} + +static int mb86a20s_reset_counters(struct dvb_frontend *fe) +{ + struct mb86a20s_state *state = fe->demodulator_priv; + struct dtv_frontend_properties *c = &fe->dtv_property_cache; + int rc, val; + + dev_dbg(&state->i2c->dev, "%s called.\n", __func__); + + /* Reset the counters, if the channel changed */ + if (state->last_frequency != c->frequency) { + memset(&c->strength, 0, sizeof(c->strength)); + memset(&c->cnr, 0, sizeof(c->cnr)); + memset(&c->pre_bit_error, 0, sizeof(c->pre_bit_error)); + memset(&c->pre_bit_count, 0, sizeof(c->pre_bit_count)); + memset(&c->block_error, 0, sizeof(c->block_error)); + memset(&c->block_count, 0, sizeof(c->block_count)); + + state->last_frequency = c->frequency; + } + + /* Clear status for most stats */ + + /* BER counter reset */ + rc = mb86a20s_writeregdata(state, mb86a20s_vber_reset); + if (rc < 0) + goto err; + + /* MER, PER counter reset */ + rc = mb86a20s_writeregdata(state, mb86a20s_per_reset); + if (rc < 0) + goto err; + + /* CNR counter reset */ + rc = mb86a20s_readreg(state, 0x45); + if (rc < 0) + goto err; + val = rc; + rc = mb86a20s_writereg(state, 0x45, val | 0x10); + if (rc < 0) + goto err; + rc = mb86a20s_writereg(state, 0x45, val & 0x6f); + if (rc < 0) + goto err; + + /* MER counter reset */ + rc = mb86a20s_writereg(state, 0x50, 0x50); + if (rc < 0) + goto err; + rc = mb86a20s_readreg(state, 0x51); + if (rc < 0) + goto err; + val = rc; + rc = mb86a20s_writereg(state, 0x51, val | 0x01); + if (rc < 0) + goto err; + rc = mb86a20s_writereg(state, 0x51, val & 0x06); + if (rc < 0) + goto err; + +err: return rc; +} + +static void mb86a20s_stats_not_ready(struct dvb_frontend *fe) +{ + struct mb86a20s_state *state = fe->demodulator_priv; + struct dtv_frontend_properties *c = &fe->dtv_property_cache; + int i; + + dev_dbg(&state->i2c->dev, "%s called.\n", __func__); + /* Fill the length of each status counter */ + + /* Only global stats */ + c->strength.len = 1; + + /* Per-layer stats - 3 layers + global */ + c->cnr.len = 4; + c->pre_bit_error.len = 4; + c->pre_bit_count.len = 4; + c->block_error.len = 4; + c->block_count.len = 4; + + /* Signal is always available */ + c->strength.stat[0].scale = FE_SCALE_RELATIVE; + c->strength.stat[0].uvalue = 0; + + /* Put all of them at FE_SCALE_NOT_AVAILABLE */ + for (i = 0; i < 4; i++) { + c->cnr.stat[i].scale = FE_SCALE_NOT_AVAILABLE; + c->pre_bit_error.stat[i].scale = FE_SCALE_NOT_AVAILABLE; + c->pre_bit_count.stat[i].scale = FE_SCALE_NOT_AVAILABLE; + c->block_error.stat[i].scale = FE_SCALE_NOT_AVAILABLE; + c->block_count.stat[i].scale = FE_SCALE_NOT_AVAILABLE; + } } + +/* + * The functions below are called via DVB callbacks, so they need to + * properly use the I2C gate control + */ + static int mb86a20s_initfe(struct dvb_frontend *fe) { struct mb86a20s_state *state = fe->demodulator_priv; @@ -637,30 +772,80 @@ static int mb86a20s_set_frontend(struct dvb_frontend *fe) if (fe->ops.i2c_gate_ctrl) fe->ops.i2c_gate_ctrl(fe, 0); rc = mb86a20s_writeregdata(state, mb86a20s_reset_reception); + mb86a20s_reset_counters(fe); if (fe->ops.i2c_gate_ctrl) fe->ops.i2c_gate_ctrl(fe, 1); return rc; } -static int mb86a20s_read_status_gate(struct dvb_frontend *fe, - fe_status_t *status) +static int mb86a20s_read_status_and_stats(struct dvb_frontend *fe, + fe_status_t *status) { - int ret; + struct mb86a20s_state *state = fe->demodulator_priv; + struct dtv_frontend_properties *c = &fe->dtv_property_cache; + int rc; - *status = 0; + dev_dbg(&state->i2c->dev, "%s called.\n", __func__); if (fe->ops.i2c_gate_ctrl) fe->ops.i2c_gate_ctrl(fe, 0); - ret = mb86a20s_read_status(fe, status); + /* Get lock */ + rc = mb86a20s_read_status(fe, status); + if (!(*status & FE_HAS_LOCK)) { + mb86a20s_stats_not_ready(fe); + mb86a20s_reset_frontend_cache(fe); + } + if (rc < 0) + goto error; + + /* Get signal strength */ + rc = mb86a20s_read_signal_strength(fe); + if (rc < 0) { + mb86a20s_stats_not_ready(fe); + mb86a20s_reset_frontend_cache(fe); + goto error; + } + /* Fill signal strength */ + c->strength.stat[0].uvalue = rc; + + if (*status & FE_HAS_LOCK) { + /* Get TMCC info*/ + rc = mb86a20s_get_frontend(fe); + if (rc < 0) + goto error; + } + + mb86a20s_stats_not_ready(fe); if (fe->ops.i2c_gate_ctrl) fe->ops.i2c_gate_ctrl(fe, 1); +error: + return rc; +} + +static int mb86a20s_read_signal_strength_from_cache(struct dvb_frontend *fe, + u16 *strength) +{ + struct dtv_frontend_properties *c = &fe->dtv_property_cache; + + + *strength = c->strength.stat[0].uvalue; - return ret; + return 0; } +static int mb86a20s_get_frontend_dummy(struct dvb_frontend *fe) +{ + /* + * get_frontend is now handled together with other stats + * retrival, when read_status() is called, as some statistics + * will depend on the layers detection. + */ + return 0; +}; + static int mb86a20s_tune(struct dvb_frontend *fe, bool re_tune, unsigned int mode_flags, @@ -676,7 +861,7 @@ static int mb86a20s_tune(struct dvb_frontend *fe, rc = mb86a20s_set_frontend(fe); if (!(mode_flags & FE_TUNE_MODE_ONESHOT)) - mb86a20s_read_status_gate(fe, status); + mb86a20s_read_status_and_stats(fe, status); return rc; } @@ -759,9 +944,9 @@ static struct dvb_frontend_ops mb86a20s_ops = { .init = mb86a20s_initfe, .set_frontend = mb86a20s_set_frontend, - .get_frontend = mb86a20s_get_frontend, - .read_status = mb86a20s_read_status_gate, - .read_signal_strength = mb86a20s_read_signal_strength, + .get_frontend = mb86a20s_get_frontend_dummy, + .read_status = mb86a20s_read_status_and_stats, + .read_signal_strength = mb86a20s_read_signal_strength_from_cache, .tune = mb86a20s_tune, };