From: Sven Eckelmann Date: Mon, 23 Nov 2020 12:41:34 +0000 (+0100) Subject: ath79: Add support for OpenMesh MR1750 v2 X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=0988e03f0e676286f3377d1530ebfb0d819ee629;p=openwrt%2Fstaging%2Fdangole.git ath79: Add support for OpenMesh MR1750 v2 Device specifications: ====================== * Qualcomm/Atheros QCA9558 ver 1 rev 0 * 720/600/240 MHz (CPU/DDR/AHB) * 128 MB of RAM * 16 MB of SPI NOR flash - 2x 7 MB available; but one of the 7 MB regions is the recovery image * 3T3R 2.4 GHz Wi-Fi (11n) * 3T3R 5 GHz Wi-Fi (11ac) * 6x GPIO-LEDs (2x wifi, 2x status, 1x lan, 1x power) * 1x GPIO-button (reset) * external h/w watchdog (enabled by default)) * TTL pins are on board (arrow points to VCC, then follows: GND, TX, RX) * 1x ethernet - AR8035 ethernet PHY (RGMII) - 10/100/1000 Mbps Ethernet - 802.3af POE - used as LAN interface * 12-24V 1A DC * internal antennas Flashing instructions: ====================== Various methods can be used to install the actual image on the flash. Two easy ones are: ap51-flash ---------- The tool ap51-flash (https://github.com/ap51-flash/ap51-flash) should be used to transfer the image to the u-boot when the device boots up. initramfs from TFTP ------------------- The serial console must be used to access the u-boot shell during bootup. It can then be used to first boot up the initramfs image from a TFTP server (here with the IP 192.168.1.21): setenv serverip 192.168.1.21 setenv ipaddr 192.168.1.1 tftpboot 0c00000 .bin && bootm $fileaddr The actual sysupgrade image can then be transferred (on the LAN port) to the device via scp .bin root@192.168.1.1:/tmp/ On the device, the sysupgrade must then be started using sysupgrade -n /tmp/.bin Signed-off-by: Sven Eckelmann [rebase, add LED migration] Signed-off-by: Adrian Schmutzler --- diff --git a/package/boot/uboot-envtools/Makefile b/package/boot/uboot-envtools/Makefile index fb025c95ea..dda9d6be9c 100644 --- a/package/boot/uboot-envtools/Makefile +++ b/package/boot/uboot-envtools/Makefile @@ -10,7 +10,7 @@ include $(TOPDIR)/rules.mk PKG_NAME:=uboot-envtools PKG_DISTNAME:=u-boot PKG_VERSION:=2020.04 -PKG_RELEASE:=19 +PKG_RELEASE:=20 PKG_SOURCE:=$(PKG_DISTNAME)-$(PKG_VERSION).tar.bz2 PKG_SOURCE_URL:= \ diff --git a/package/boot/uboot-envtools/files/ath79 b/package/boot/uboot-envtools/files/ath79 index dfb77112a7..4b84766814 100644 --- a/package/boot/uboot-envtools/files/ath79 +++ b/package/boot/uboot-envtools/files/ath79 @@ -53,6 +53,7 @@ openmesh,mr600-v2|\ openmesh,mr900-v1|\ openmesh,mr900-v2|\ openmesh,mr1750-v1|\ +openmesh,mr1750-v2|\ openmesh,om5p|\ openmesh,om5p-ac-v2|\ samsung,wam250|\ diff --git a/target/linux/ath79/dts/qca9558_openmesh_mr1750-v2.dts b/target/linux/ath79/dts/qca9558_openmesh_mr1750-v2.dts new file mode 100644 index 0000000000..0271db0802 --- /dev/null +++ b/target/linux/ath79/dts/qca9558_openmesh_mr1750-v2.dts @@ -0,0 +1,16 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT + +#include "qca9558_openmesh_mr.dtsi" + +/ { + compatible = "openmesh,mr1750-v2", "qca,qca9558"; + model = "OpenMesh MR1750 v2"; +}; + +&led_wifi2g { + linux,default-trigger = "phy1tpt"; +}; + +&led_wifi5g { + linux,default-trigger = "phy0tpt"; +}; diff --git a/target/linux/ath79/generic/base-files/etc/board.d/01_leds b/target/linux/ath79/generic/base-files/etc/board.d/01_leds index 2cdad7dd77..c6ade98c8f 100755 --- a/target/linux/ath79/generic/base-files/etc/board.d/01_leds +++ b/target/linux/ath79/generic/base-files/etc/board.d/01_leds @@ -160,7 +160,8 @@ engenius,eap300-v2|\ enterasys,ws-ap3705i|\ openmesh,mr900-v1|\ openmesh,mr900-v2|\ -openmesh,mr1750-v1) +openmesh,mr1750-v1|\ +openmesh,mr1750-v2) ucidef_set_led_netdev "lan" "LAN" "blue:lan" "eth0" ;; compex,wpj344-16m|\ diff --git a/target/linux/ath79/generic/base-files/etc/board.d/02_network b/target/linux/ath79/generic/base-files/etc/board.d/02_network index ef6b70c902..0c08871f99 100755 --- a/target/linux/ath79/generic/base-files/etc/board.d/02_network +++ b/target/linux/ath79/generic/base-files/etc/board.d/02_network @@ -51,6 +51,7 @@ ath79_setup_interfaces() openmesh,mr900-v1|\ openmesh,mr900-v2|\ openmesh,mr1750-v1|\ + openmesh,mr1750-v2|\ pcs,cap324|\ pisen,ts-d084|\ pisen,wmb001n|\ diff --git a/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/11-ath10k-caldata b/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/11-ath10k-caldata index d1a4767648..84323046f6 100644 --- a/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/11-ath10k-caldata +++ b/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/11-ath10k-caldata @@ -96,7 +96,8 @@ case "$FIRMWARE" in caldata_extract "art" 0x5000 0x844 ath10k_patch_mac $(mtd_get_mac_binary art 0xc) ;; - openmesh,mr1750-v1) + openmesh,mr1750-v1|\ + openmesh,mr1750-v2) caldata_extract "ART" 0x5000 0x844 ath10k_patch_mac $(macaddr_add $(cat /sys/class/net/eth0/address) +16) ;; diff --git a/target/linux/ath79/generic/base-files/etc/uci-defaults/04_led_migration b/target/linux/ath79/generic/base-files/etc/uci-defaults/04_led_migration index 1d8909f688..ea5cafa66b 100644 --- a/target/linux/ath79/generic/base-files/etc/uci-defaults/04_led_migration +++ b/target/linux/ath79/generic/base-files/etc/uci-defaults/04_led_migration @@ -25,7 +25,8 @@ openmesh,mr600-v2) ;; openmesh,mr900-v1|\ openmesh,mr900-v2|\ -openmesh,mr1750-v1) +openmesh,mr1750-v1|\ +openmesh,mr1750-v2) migrate_leds ":wlan24=:wifi2g" ":wlan58=:wifi5g" ":wan=:lan" ;; pcs,cap324) diff --git a/target/linux/ath79/generic/base-files/lib/upgrade/platform.sh b/target/linux/ath79/generic/base-files/lib/upgrade/platform.sh index 01a9f61943..575761d079 100644 --- a/target/linux/ath79/generic/base-files/lib/upgrade/platform.sh +++ b/target/linux/ath79/generic/base-files/lib/upgrade/platform.sh @@ -55,6 +55,7 @@ platform_do_upgrade() { openmesh,mr900-v1|\ openmesh,mr900-v2|\ openmesh,mr1750-v1|\ + openmesh,mr1750-v2|\ openmesh,om2p-v2|\ openmesh,om2p-v4|\ openmesh,om2p-hs-v1|\ diff --git a/target/linux/ath79/image/generic.mk b/target/linux/ath79/image/generic.mk index 92e9458b37..3b5cb6bdfa 100644 --- a/target/linux/ath79/image/generic.mk +++ b/target/linux/ath79/image/generic.mk @@ -1601,6 +1601,17 @@ define Device/openmesh_mr1750-v1 endef TARGET_DEVICES += openmesh_mr1750-v1 +define Device/openmesh_mr1750-v2 + $(Device/openmesh_common_64k) + SOC := qca9558 + DEVICE_MODEL := MR1750 + DEVICE_VARIANT := v2 + DEVICE_PACKAGES += kmod-ath10k-ct ath10k-firmware-qca988x-ct + OPENMESH_CE_TYPE := MR1750 + SUPPORTED_DEVICES += mr1750v2 +endef +TARGET_DEVICES += openmesh_mr1750-v2 + define Device/openmesh_om2p-v2 $(Device/openmesh_common_256k) SOC := ar9330