From: Andreas Böhler Date: Sat, 1 Apr 2023 19:57:22 +0000 (+0200) Subject: ath79: add support for Alcatel HH40V X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=097f350aebc542963c7208af4973ff17e01ce76e;p=openwrt%2Fstaging%2Fblogic.git ath79: add support for Alcatel HH40V The Alcatel HH40V is a CAT4 LTE router used by various ISPs. Specifications ============== SoC: QCA9531 650MHz RAM: 128MiB Flash: 32MiB SPI NOR LAN: 1x 10/100MBit WAN: 1x 10/100MBit LTE: MDM9607 USB 2.0 (rndis configuration) WiFi: 802.11n (SoC integrated) MAC address assignment ====================== There are three MAC addresses stored in the flash ROM, the assignment follows stock. The MAC on the label is the WiFi MAC address. Installation (TFTP) =================== 1. Connect serial console 2. Configure static IP to 192.168.1.112 3. Put OpenWrt factory.bin file as firmware-system.bin 4. Press Power + WPS and plug in power 5. Keep buttons pressed until TFTP requests are visible 6. Wait for the system to finish flashing and wait for reboot 7. Bootup will fail as the kernel offset is wrong 8. Run "setenv bootcmd bootm 0x9f150000" 9. Reset board and enjoy OpenWrt Installation (without UART) =========================== Installation without UART is a bit tricky and requires several steps too long for the commit message. Basic steps: 1. Create configure backup 2. Patch backup file to enable SSH 3. Login via SSH and configure the new bootcmd 3. Flash OpenWrt factory.bin image manually (sysupgrade doesn't work) More detailed instructions will be provided on the Wiki page. Tested by: Christian Heuff Signed-off-by: Andreas Böhler --- diff --git a/package/boot/uboot-envtools/files/ath79 b/package/boot/uboot-envtools/files/ath79 index c7049f702924..47271453f69f 100644 --- a/package/boot/uboot-envtools/files/ath79 +++ b/package/boot/uboot-envtools/files/ath79 @@ -12,6 +12,7 @@ touch /etc/config/ubootenv board=$(board_name) case "$board" in +alcatel,hh40v|\ alfa-network,ap121f|\ alfa-network,ap121fe|\ alfa-network,n2q|\ diff --git a/target/linux/ath79/dts/qca9531_alcatel_hh40v.dts b/target/linux/ath79/dts/qca9531_alcatel_hh40v.dts new file mode 100644 index 000000000000..7873f75528b9 --- /dev/null +++ b/target/linux/ath79/dts/qca9531_alcatel_hh40v.dts @@ -0,0 +1,172 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT + +#include "qca953x.dtsi" + +#include +#include + +/ { + compatible = "alcatel,hh40v", "qca,qca9531"; + model = "Alcatel HH40V"; + + aliases { + label-mac-device = &wmac; + led-boot = &led_lan_link; + led-failsafe = &led_lan_link; + led-upgrade = &led_lan_link; + }; + + keys { + compatible = "gpio-keys"; + + reset { + label = "reset"; + linux,code = ; + gpios = <&gpio 17 GPIO_ACTIVE_LOW>; + }; + + wps { + label = "wps"; + linux,code = ; + gpios = <&gpio 16 GPIO_ACTIVE_LOW>; + }; + + }; + + leds { + compatible = "gpio-leds"; + + pinctrl-names = "default"; + pinctrl-0 = <&jtag_disable_pins>; + + lan_active { + label = "green:lan"; + gpios = <&gpio 11 GPIO_ACTIVE_LOW>; + }; + + led_lan_link: lan_link { + label = "orange:lan"; + gpios = <&gpio 12 GPIO_ACTIVE_LOW>; + }; + + wan_active { + label = "green:wan"; + gpios = <&gpio 13 GPIO_ACTIVE_LOW>; + }; + + wan_link { + label = "orange:wan"; + gpios = <&gpio 14 GPIO_ACTIVE_LOW>; + }; + + wifi { + label = "blue:wifi"; + gpios = <&gpio 0 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "phy0tpt"; + }; + }; +}; + +&usb0 { + status = "okay"; + + dr_mode = "host"; +}; + +&usb_phy { + status = "okay"; +}; + +&spi { + status = "okay"; + + /* Winbond W25Q256 SPI flash */ + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <25000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "u-boot"; + reg = <0x000000 0x040000>; + read-only; + }; + + partition@40000 { + label = "u-boot-env"; + reg = <0x040000 0x010000>; + }; + + partition@50000 { + label = "oem"; + reg = <0x050000 0x100000>; + read-only; + }; + + partition@150000 { + compatible = "denx,uimage"; + label = "firmware"; + reg = <0x150000 0xea0000>; + }; + + art: partition@ff0000 { + label = "art"; + reg = <0xff0000 0x010000>; + read-only; + + compatible = "nvmem-cells"; + #address-cells = <1>; + #size-cells = <1>; + + cal_art_1000: cal@1000 { + reg = <0x1000 0x440>; + }; + + macaddr_art_0: macaddr@0 { + reg = <0x0 0x6>; + }; + + macaddr_art_6: macaddr@6 { + reg = <0x6 0x6>; + }; + + macaddr_art_1002: macaddr@1002 { + reg = <0x1002 0x6>; + }; + }; + }; + }; +}; + +&mdio0 { + status = "okay"; +}; + + +ð0 { + status = "okay"; + + nvmem-cells = <&macaddr_art_0>; + nvmem-cell-names = "mac-address"; + + phy-handle = <&swphy4>; +}; + +ð1 { + compatible = "qca,qca9530-eth", "syscon", "simple-mfd"; + + nvmem-cells = <&macaddr_art_6>; + nvmem-cell-names = "mac-address"; +}; + +&wmac { + status = "okay"; + + nvmem-cells = <&cal_art_1000>, <&macaddr_art_1002>; + nvmem-cell-names = "calibration", "mac-address"; +}; diff --git a/target/linux/ath79/generic/base-files/etc/board.d/01_leds b/target/linux/ath79/generic/base-files/etc/board.d/01_leds index 5855d2a92875..d3508049baa9 100644 --- a/target/linux/ath79/generic/base-files/etc/board.d/01_leds +++ b/target/linux/ath79/generic/base-files/etc/board.d/01_leds @@ -10,6 +10,12 @@ case "$board" in ucidef_set_led_netdev "lan" "LAN" "orange:eth0" "eth0" ucidef_set_led_switch "wan" "WAN" "orange:eth1" "switch0" "0x04" ;; +alcatel,hh40v) + ucidef_set_led_netdev "lan_data" "LAN Data" "green:lan" "eth1" "tx rx" + ucidef_set_led_netdev "lan_link" "LAN Link" "orange:lan" "eth1" "link" + ucidef_set_led_netdev "wan_data" "WAN Data" "green:wan" "eth0" "tx rx" + ucidef_set_led_netdev "wan_link" "WAN Link" "orange:wan" "eth0" "link" + ;; alfa-network,ap121f|\ alfa-network,ap121fe|\ avm,fritz450e|\ diff --git a/target/linux/ath79/generic/base-files/etc/board.d/02_network b/target/linux/ath79/generic/base-files/etc/board.d/02_network index c6284edafd06..1d89f0b86c5e 100644 --- a/target/linux/ath79/generic/base-files/etc/board.d/02_network +++ b/target/linux/ath79/generic/base-files/etc/board.d/02_network @@ -217,6 +217,7 @@ ath79_setup_interfaces() ucidef_add_switch "switch0" \ "0@eth0" "1:lan:1" "3:lan:4" "4:lan:3" "5:lan:2" "2:wan" ;; + alcatel,hh40v|\ comfast,cf-e110n-v2|\ comfast,cf-e120a-v3|\ comfast,cf-e314n-v2|\ diff --git a/target/linux/ath79/image/generic.mk b/target/linux/ath79/image/generic.mk index dda74f04f447..ecc46bc6b12c 100644 --- a/target/linux/ath79/image/generic.mk +++ b/target/linux/ath79/image/generic.mk @@ -246,6 +246,18 @@ define Device/adtran_bsap1840 endef TARGET_DEVICES += adtran_bsap1840 +define Device/alcatel_hh40v + SOC := qca9531 + DEVICE_VENDOR := Alcatel + DEVICE_MODEL := HH40V + DEVICE_PACKAGES := kmod-usb2 kmod-usb-serial-option kmod-usb-net-rndis + IMAGE_SIZE := 14976k + IMAGES += factory.bin + IMAGE/factory.bin := append-kernel | pad-to $$$$(BLOCKSIZE) | \ + append-rootfs | pad-rootfs +endef +TARGET_DEVICES += alcatel_hh40v + define Device/airtight_c-75 SOC := qca9550 DEVICE_VENDOR := AirTight Networks