From: Gabor Juhos Date: Tue, 5 Nov 2013 16:31:14 +0000 (+0000) Subject: ar71xx: generate recovery image for WNDR4300 X-Git-Tag: reboot~8760 X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=08e061327571c8431afe1edd5ad418ef4c677315;p=openwrt%2Fstaging%2Fchunkeey.git ar71xx: generate recovery image for WNDR4300 Extended the Makefile to generate a working factory reset image for Netgear WNDR4300. The image uses UBI with two volumes squashfs (rootfs) and JFFS2 (rootfs_data). In order to make stock U-Boot happy, a fake rootfs image is placed into the last erase block of the kernel partition. Signed-off-by: Stefan Agner [juhosg: - restore the NetgearNAND/initramfs macro, - remove unused {Squash,Ubi}fsTemplate macros, - remove board specific mtd options from CONFIG_CMDLINE, append the board specific ubi.mtd parameter to the kernel command line instead, - increase kernel partition size to 2MiB, - use board specific ini file for ubinize, - put jffs2 eof mark into the rootfs_data ubi volume, - use KDIR_TMP for temporary images, - use the squashfs-raw image, - increase kernel partition size to 2MiB, - use a local ubinize macro, - fix macro parameter comments, - put the fake rootfs into the last erase block of the kernel partition, - move Image/Build/NetgearNAND/buildkernel macro before define Image/Build/NetgearNAND, - don't use the wndr3700 utility, use '-M' parameter of mkimage to set the uImage magic, - use '-recovery' suffix for the generated image, it is only usable via the fw_recovery function of the bootloader, - update commit log] Signed-off-by: Gabor Juhos SVN-Revision: 38655 --- diff --git a/target/linux/ar71xx/image/Makefile b/target/linux/ar71xx/image/Makefile index b1909ddcc7..811da74bcf 100644 --- a/target/linux/ar71xx/image/Makefile +++ b/target/linux/ar71xx/image/Makefile @@ -144,6 +144,17 @@ Sysupgrade/KR=$(call CatFiles,$(2),$(3),$(KDIR)/root.$(1),$(4),$(call sysupname, Sysupgrade/KRuImage=$(call CatFiles,$(KDIR_TMP)/vmlinux-$(2).uImage,$(3),$(KDIR)/root.$(1),$(4),$(call sysupname,$(1),$(2)),$(5)) Sysupgrade/RKuImage=$(call CatFiles,$(KDIR)/root.$(1),$(4),$(KDIR_TMP)/vmlinux-$(2).uImage,$(3),$(call sysupname,$(1),$(2))) +# $(1): ubinize ini file +# $(2): working directory +# $(3): output file +# $(4): physical erase block size +# $(5): minimum I/O unit size +# $(6): custom options +define ubinize + $(CP) $(1) $(2) + ( cd $(2); $(STAGING_DIR_HOST)/bin/ubinize -o $(3) -p $(4) -m $(5) $(6) $(1)) +endef + define Image/BuildLoader -rm -rf $(KDIR)/lzma-loader $(LOADER_MAKE) LOADER=loader-$(1).$(2) KERNEL_CMDLINE="$(3)"\ @@ -206,7 +217,7 @@ wnr2200_mtdlayout=mtdparts=spi0.0:320k(u-boot)ro,128k(u-boot-env)ro,7680k(firmwa wnr2000v3_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,3712k(firmware),64k(art)ro wndr3700_mtdlayout=mtdparts=spi0.0:320k(u-boot)ro,128k(u-boot-env)ro,7680k(firmware),64k(art)ro wndr3700v2_mtdlayout=mtdparts=spi0.0:320k(u-boot)ro,128k(u-boot-env)ro,15872k(firmware),64k(art)ro -wndr4300_mtdlayout=mtdparts=ar934x-nfc:256k(u-boot)ro,256k(u-boot-env)ro,256k(caldata),512k(pot),2048k(language),512k(config),3072k(traffic_meter),1152k(kernel),24448k(rootfs),25600k@0x6c0000(firmware),256k(caldata_backup),-(reserved) +wndr4300_mtdlayout=mtdparts=ar934x-nfc:256k(u-boot)ro,256k(u-boot-env)ro,256k(caldata),512k(pot),2048k(language),512k(config),3072k(traffic_meter),2048k(kernel),23552k(ubiroot),25600k@0x6c0000(firmware),256k(caldata_backup),-(reserved) ubi.mtd=ubiroot zcn1523h_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,6208k(rootfs),1472k(kernel),64k(configure)ro,64k(mfg)ro,64k(art)ro,7680k@0x50000(firmware) mynet_n600_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,64k(devdata)ro,64k(devconf)ro,15872k(firmware),64k(radiocfg)ro @@ -717,6 +728,63 @@ endef Image/Build/NetgearNAND/initramfs=$(call Image/Build/Netgear/initramfs,$(1),$(2),$(3),$(4),$(5)) +# $(1): (empty) +# $(2): Board name (small caps) +# $(3): Kernel board specific cmdline +# $(4): Kernel mtdparts definition +# $(5): U-Boot magic +define Image/Build/NetgearNAND/buildkernel + $(eval kernelsize=$(call mtdpartsize,kernel,$(4))) + $(call PatchKernelLzma,$(2),$(3) $(4),-d20) + dd if=$(KDIR_TMP)/vmlinux-$(2).bin.lzma \ + of=$(KDIR_TMP)/vmlinux-$(2).bin.tmp \ + bs=$$$$(($(kernelsize)-131072-2*64-1)) \ + count=1 conv=sync + $(call MkuImage,lzma,-M $(5),$(KDIR_TMP)/vmlinux-$(2).bin.tmp,$(KDIR_TMP)/vmlinux-$(2).uImage) + echo -ne '\xff' >> $(KDIR_TMP)/vmlinux-$(2).uImage + # create a fake rootfs image + dd if=/dev/zero of=$(KDIR_TMP)/fakeroot-$(2) bs=131072 count=1 + mkimage -A mips -O linux -T filesystem -C none \ + -a 0xbf070000 -e 0xbf070000 \ + -n 'MIPS OpenWrt fakeroot' \ + -d $(KDIR_TMP)/fakeroot-$(2) \ + -M $(5) \ + $(KDIR_TMP)/fakeroot-$(2).uImage + # append the fake rootfs image to the kernel, it will reside in the last + # erase block of the kernel partition + cat $(KDIR_TMP)/fakeroot-$(2).uImage >> $(KDIR_TMP)/vmlinux-$(2).uImage +endef + + +# $(1): rootfs image suffix +# $(2): Board name (small caps) +# $(3): Kernel board specific cmdline +# $(4): Kernel mtdparts definition +# $(5): U-Boot magic +# $(6): Board name (upper caps) +# $(7): firmware region code (not used yet) +# $(8): DNI Hardware version +define Image/Build/NetgearNAND + $(eval firmwaresize=$(call mtdpartsize,firmware,$(4))) + $(eval kernelsize=$(call mtdpartsize,kernel,$(4))) + $(eval imageraw=$(KDIR_TMP)/$(2)-raw.img) + $(CP) $(KDIR)/root.squashfs-raw $(KDIR_TMP)/root.squashfs + echo -ne '\xde\xad\xc0\xde' > $(KDIR_TMP)/jffs2.eof + $(call ubinize,ubinize-$(2).ini,$(KDIR_TMP),$(KDIR_TMP)/$(2)-root.ubi,128KiB,2048) + # Create firmware image full of 0xff to use the UBIFS auto-resize function + firmwareblocks=$$$$(($(firmwaresize) / 131072)); \ + dd if=/dev/zero bs=128k count=$$$${firmwareblocks} conv=sync | tr '\000' '\377' > $(imageraw) + # Insert Kernel and UBI image to rootfs and generate DNI image + dd if=$(KDIR_TMP)/vmlinux-$(2).uImage of=$(imageraw) conv=notrunc + kernelblocks=$$$$(($(kernelsize) / 131072)); \ + dd if=$(KDIR_TMP)/$(2)-root.ubi of=$(imageraw) bs=128k seek=$$$${kernelblocks} conv=notrunc + $(STAGING_DIR_HOST)/bin/mkdniimg \ + -B $(6) -v OpenWrt.$(REVISION) -r "$$$$r" $(8) \ + -i $(imageraw) \ + -o $(call imgname,ubi,$(2))-recovery.img +endef + + ifdef CONFIG_PACKAGE_uboot-ar71xx-nbg460n_550n_550nh Image/Build/ZyXEL/buildkernel=$(call MkuImageLzma,$(2),$(3)) @@ -1005,7 +1073,7 @@ $(eval $(call MultiProfile,Madwifi,EAP7660D UBNTRS UBNTRSPRO UBNTLSSR71 WP543)) endif # ifeq ($(SUBTARGET),generic) ifeq ($(SUBTARGET),nand) -$(eval $(call SingleProfile,NetgearNAND,64k,WNDR4300,wndr4300,WNDR4300,ttyS0,115200,$$(wndr4300_mtdlayout),3703,WNDR4300,"",-H 29763948+0+128+128+2x2+3x3)) +$(eval $(call SingleProfile,NetgearNAND,64k,WNDR4300,wndr4300,WNDR4300,ttyS0,115200,$$(wndr4300_mtdlayout),0x33373033,WNDR4300,"",-H 29763948+0+128+128+2x2+3x3)) endif # ifeq ($(SUBTARGET),nand) diff --git a/target/linux/ar71xx/image/ubinize-wndr4300.ini b/target/linux/ar71xx/image/ubinize-wndr4300.ini new file mode 100644 index 0000000000..c95c5e4b1e --- /dev/null +++ b/target/linux/ar71xx/image/ubinize-wndr4300.ini @@ -0,0 +1,27 @@ +[rootfs] +# Volume mode (other option is static) +mode=ubi +# Source image +image=root.squashfs +# Volume ID in UBI image +vol_id=0 +# Allow for dynamic resize +vol_type=dynamic +# Volume name +vol_name=rootfs +# Autoresize volume at first mount +# vol_flags=autoresize + +[rootfs_data] +# Volume mode (other option is static) +mode=ubi +# Source image +image=jffs2.eof +# Volume ID in UBI image +vol_id=1 +# Allow for dynamic resize +vol_type=dynamic +# Volume name +vol_name=rootfs_data +# Autoresize volume at first mount +vol_flags=autoresize