From: Maxim Anisimov Date: Wed, 18 Dec 2019 06:48:38 +0000 (+0300) Subject: ramips: fix leds for TP-Link Archer C20 v4 X-Git-Tag: v19.07.1~44 X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=08d9828b767a3555ed655392725a7fb7d633ee8c;p=openwrt%2Fstaging%2Fpepe2k.git ramips: fix leds for TP-Link Archer C20 v4 - add "gpio" group for wan_orange led - use tpt triggers for wifi led indication - add wifi 5 GHz led support Signed-off-by: Maxim Anisimov [slight commit message adjustment, backport] Signed-off-by: Adrian Schmutzler (cherry picked from commit 3a538db60abfc50b47ce1774f66d489700a50c00) --- diff --git a/target/linux/ramips/base-files/etc/board.d/01_leds b/target/linux/ramips/base-files/etc/board.d/01_leds index fa7daf0ff2..0845db393d 100755 --- a/target/linux/ramips/base-files/etc/board.d/01_leds +++ b/target/linux/ramips/base-files/etc/board.d/01_leds @@ -329,7 +329,6 @@ tplink,c20-v1) tplink,c20-v4) ucidef_set_led_switch "lan" "lan" "$boardname:green:lan" "switch0" "0x1e" ucidef_set_led_switch "wan" "wan" "$boardname:green:wan" "switch0" "0x01" - ucidef_set_led_netdev "wlan2g" "wlan2g" "$boardname:green:wlan2g" "wlan0" ;; tplink,c50-v3|\ tplink,c50-v4) diff --git a/target/linux/ramips/dts/ArcherC20v4.dts b/target/linux/ramips/dts/ArcherC20v4.dts index aaafcc52f5..1103573641 100644 --- a/target/linux/ramips/dts/ArcherC20v4.dts +++ b/target/linux/ramips/dts/ArcherC20v4.dts @@ -42,11 +42,13 @@ wlan5g { label = "c20-v4:green:wlan5g"; gpios = <&gpio1 8 GPIO_ACTIVE_LOW>; + linux,default-trigger = "phy1tpt"; }; wlan2g { label = "c20-v4:green:wlan2g"; gpios = <&gpio1 7 GPIO_ACTIVE_LOW>; + linux,default-trigger = "phy0tpt"; }; wps { @@ -84,7 +86,7 @@ &pinctrl { state_default: pinctrl0 { gpio { - ralink,group = "i2s", "refclk", "p0led_an", "p1led_an", "p2led_an", "p3led_an", "p4led_an", "wdt"; + ralink,group = "i2s", "gpio", "refclk", "p0led_an", "p1led_an", "p2led_an", "p3led_an", "p4led_an", "wdt"; ralink,function = "gpio"; }; };